WorldWideScience

Sample records for bulk power transmission

  1. Onshore continuation of bipolar cable systems for bulk wind power transmission

    Energy Technology Data Exchange (ETDEWEB)

    Brakelmann, Heinrich; Brueggmann, Jan; Stammen, Joerg [Duisburg-Essen Univ., Duisburg (Germany). Dept. of Electrical Engineering

    2009-07-01

    Offshore windfarms have to be connected to the onshore grid by means of high voltage submarine cables. Typical windfarms (pilot-phase) may have an installed power of 400 MW. Several windfarms can be arranged to a cluster with a common grid connection which has to be designed for e.g. 2000 MW. For such tasks of bulk power transmission, the HVAC bipolar cable system was proposed. By use of three 245 kV bipolar four-core submarine cables, the desired 2000 MW can be transmitted over distances of more than 150 km. Hence, HVAC bipolar systems offer an efficient bulk power transmission with flexibility in installation and operation. Onshore, such connections have to find a continuation by use of land cables. In order to enable extreme transmission capacities, cable routes are analysed, which are equipped with standard 245 kV single-core XLPE-cables in bipolar configurations and with special, thermally improved backfill. Time varying loads and partially dried-out soil are considered. (orig.)

  2. The Cost and Benefit of Bulk Energy Storage in the Arizona Power Transmission System

    Science.gov (United States)

    Ruggiero, John

    This thesis addresses the issue of making an economic case for energy storage in power systems. Bulk energy storage has often been suggested for large scale electric power systems in order to levelize load; store energy when it is inexpensive and discharge energy when it is expensive; potentially defer transmission and generation expansion; and provide for generation reserve margins. As renewable energy resource penetration increases, the uncertainty and variability of wind and solar may be alleviated by bulk energy storage technologies. The quadratic programming function in MATLAB is used to simulate an economic dispatch that includes energy storage. A program is created that utilizes quadratic programming to analyze various cases using a 2010 summer peak load from the Arizona transmission system, part of the Western Electricity Coordinating Council (WECC). The MATLAB program is used first to test the Arizona test bed with a low level of energy storage to study how the storage power limit effects several optimization out-puts such as the system wide operating costs. Very high levels of energy storage are then added to see how high level energy storage affects peak shaving, load factor, and other system applications. Finally, various constraint relaxations are made to analyze why the applications tested eventually approach a constant value. This research illustrates the use of energy storage which helps minimize the system wide generator operating cost by "shaving" energy off of the peak demand.

  3. Long distance transmission of bulk power: the EHV-UHV DC challenge

    Energy Technology Data Exchange (ETDEWEB)

    Clerici, A.; Valtorta, G.

    1994-12-31

    This paper deals with technical and economical analysis of transmission of powers in the range from 1000 to 5000 MW and distances included between 1000 to 4000 km. The advantages of adoption of UHV DC transmission are evident especially for the longest distances and the largest power levels considered. (author) 4 refs., 9 figs.

  4. Highly efficient solutions for smart and bulk power transmission of 'green energy'

    Energy Technology Data Exchange (ETDEWEB)

    Breuer, Wilfried; Retzmann, Dietmar; Uecker, Karl

    2010-09-15

    Environmental constraints, loss minimization and CO2 reduction will play an increasingly more important role in future. Security and sustainability of power supply as well as economic efficiency needs application of advanced technologies. Innovative solutions with HVDC (High Voltage Direct Current) and FACTS (Flexible AC Transmission Systems) have the potential to cope with these challenges. They provide the features which are necessary to avoid technical problems in power systems, they increase the transmission capacity and system stability very efficiently and help prevent cascading outages. Furthermore, they are essential for Grid Access of Renewable Energy Sources such as Hydro, Wind and Solar-Energy.

  5. Electric Power Transmission Lines

    Data.gov (United States)

    Department of Homeland Security — Transmission Lines are the system of structures, wires, insulators and associated hardware that carry electric energy from one point to another in an electric power...

  6. Laser power transmission

    Science.gov (United States)

    Conway, Edmund J.

    1992-01-01

    An overview of previous studies related to laser power transmission is presented. Particular attention is given to the use of solar pumped lasers for space power applications. Three general laser mechanisms are addressed: photodissociation lasing driven by sunlight, photoexcitation lasing driven directly by sunlight, and photoexcitation lasing driven by thermal radiation.

  7. NB Power Transmission system

    Energy Technology Data Exchange (ETDEWEB)

    Williamson, J. [NB Power Transmission, Fredericton, NB (Canada)

    2006-07-01

    The NB Power Transmission System operates 6700 km of transmission lines having voltages of 69 kV, 138 kV, 230 kV, and 345 kV. The history of lightning protection on this transmission system was presented. Lightning protection with shield wires has been applied selectively on the 69 kV and 138 kV lines and has been applied to all lines in the 230 kV and 345 kV range. Beginning in 2000, line arresters were installed on selected 69 kV and 138 kV lines. It was noted that although overhead shield wires are commonly installed to capture lightning strikes and shield the conductors, problems can occur if the electrical flashover of insulators result in a line to ground fault. Good grounding is needed to ensure that lightning enters the ground from the tower. The new approach is to install line arresters on structures without overhead shield wires. Line arresters are surge arresters applied in parallel with the insulator string. This new line arrester technology was tested by installing nearly 1200 arresters in the Saint John area. This paper described the reasons for choosing line arresters over shield wires and presented the methods of installation. The problems and failure rates of the installed line arresters were presented along with solutions, including solutions to protect lines against lightning in areas with heavy icing. Recommendations for future research into the use, application and development of line arresters were also presented. tabs., figs.

  8. 77 FR 6554 - Zephyr Power Transmission, LLC; Pathfinder Power Transmission, LLC; Duke-American Transmission...

    Science.gov (United States)

    2012-02-08

    ... Energy Regulatory Commission Zephyr Power Transmission, LLC; Pathfinder Power Transmission, LLC; Duke... (Commission), 18 CFR 381.302, Zephyr Power Transmission, LLC (Zephyr), Pathfinder Power Transmission, LLC (PPT... to exercise its negotiated rate authority for Zephyr Power Transmission Project; (2) that...

  9. Wireless Power Transmission Using Microwaves

    Directory of Open Access Journals (Sweden)

    Nikhil B. Dhake

    2012-04-01

    Full Text Available In this paper, we present the concept of wireless power transmission to cut the clutter or lead to clean sources of electricity. It will eradicate the hazardous usage of electrical wires which involve lot of confusion in particularly organizing them. The plan is transmitting power as microwaves from one place to another in order to reduce the use of clumsy wires

  10. Analysis of Wireless Power Transmission

    OpenAIRE

    2013-01-01

    The advent of various wireless technologies have revolutionized the communication infrastructure and consequently changed the entire world into a global village. Use of wireless technology has also been made for transmission of electric power wirelessly. It increases the portability of power systems and integrates the communication technologies and electric power to the same platform. This paper presents a comprehensive review and detailed analysis of various techniques used for wireless powe...

  11. HVDC power transmission technology assessment

    Energy Technology Data Exchange (ETDEWEB)

    Hauth, R.L.; Tatro, P.J.; Railing, B.D. [New England Power Service Co., Westborough, MA (United States); Johnson, B.K.; Stewart, J.R. [Power Technologies, Inc., Schenectady, NY (United States); Fink, J.L.

    1997-04-01

    The purpose of this study was to develop an assessment of the national utility system`s needs for electric transmission during the period 1995-2020 that could be met by future reduced-cost HVDC systems. The assessment was to include an economic evaluation of HVDC as a means for meeting those needs as well as a comparison with competing technologies such as ac transmission with and without Flexible AC Transmission System (FACTS) controllers. The role of force commutated dc converters was to be assumed where appropriate. The assessment begins by identifying the general needs for transmission in the U.S. in the context of a future deregulated power industry. The possible roles for direct current transmission are then postulated in terms of representative scenarios. A few of the scenarios are illustrated with the help of actual U.S. system examples. non-traditional applications as well as traditional applications such as long lines and asynchronous interconnections are discussed. The classical ``break-even distance`` concept for comparing HVDC and ac lines is used to assess the selected scenarios. The impact of reduced-cost converters is reflected in terms of the break-even distance. This report presents a comprehensive review of the functional benefits of HVDC transmission and updated cost data for both ac and dc system components. It also provides some provocative thoughts on how direct current transmission might be applied to better utilize and expand our nation`s increasingly stressed transmission assets.

  12. Research Overview on Wireless Power Transmission Technology

    OpenAIRE

    Li Tao; Wu Liheng; Chen Zheng

    2015-01-01

    According to the latest researches, this paper outlines the development of wireless power transmission and introduces the latest applications of wireless power transmission in life. To describe the wireless power transmission technologies in detail, the paper presents the short-range, medium-range and remote wireless power transmission, respectively. In addition, the paper also depicts some unique properties of wireless power transmission system to make readers understand WPT system better. A...

  13. VSC-HVDC Technology Suitable for Bulk Power Overhead Line Transmission%大容量架空线柔性直流输电关键技术及前景展望

    Institute of Scientific and Technical Information of China (English)

    徐政; 薛英林; 张哲任

    2014-01-01

    To make the voltage source converter based high voltage direct current (VSC-HVDC) system extend to long distance bulk power overhead line transmission is the inherent requirement of energy source distribution in China and future trend of power grid development. However, the challenges associated with the state-of-the-art VSC-HVDC system mainly include: a) difficulty to handle dc fault, b) less transmission capacity compared with the traditional HVDC systems, and c) difficulty to select grounding point. For the first challenge, this paper analyzes vulnerability of the existing topologies against dc faults, focusing on an overview of the topologies with dc fault ride-through capability. According to the characteristics of dc fault processing, these topologies can be divided into three basic types. Furthermore, advantages and defects of these typical topologies are discussed. For the second and third challenges, to achieve a high voltage and power level, a bipolar VSC-HVDC topology with assembly converter is proposed. In this topology, each pole consists of several basic converter units (BCU) in series or in parallel; between the positive pole and the negative pole is the neutral bus which is connected to the ground electrode. Furthermore, the advantages and shortcomings of the possible grounding modes are summarized. At last, according to the unidirectional energy flow characteristics of China, two basic VSC-HVDC structures are analyzed.%柔性直流输电技术(voltage source converter based high voltage direct current,VSC-HVDC)应用于远距离大容量架空线输电是实现我国能源资源优化配置的客观要求,也是电网技术发展的未来趋势。目前柔性直流输电技术扩展到架空线输电场合所面临的关键问题有:直流线路故障难以快速清除、输送容量难以与传统直流输电相媲拟、主接线方式和接地方式选择原则还没有定论等。针对问题1,分析现有工程所采用的拓扑结构

  14. Wildlife and electric power transmission

    Science.gov (United States)

    Ellis, D.H.; Goodwin, J.G.; Hunt, J.R.; Fletcher, John L.; Busnel, R.G.

    1978-01-01

    Hundreds of thousands of miles of transmission lines have been introduced into our natural environment. These lines and their corridors can be damaging or beneficial to wildlife communities depending on how they are designed, where they are placed, and when they are constructed and maintained. With the current trend toward UHV systems, new problems (associated with additional increments in audible noise, electric and magnetic force fields, etc.) must be addressed. We recommend the following areas for careful study: (1) the response of wilderness species to transmission lines and line construction and maintenance activities (2) the magnitude of bird collision and electrocution mortality, (3) the response of power corridor and power tower in habiting wildlife to laboratory and field doses of electro-chemical oxidants, corona noise, electric and magnetic fields, etc., (4) the productivity of tower inhabiting birds compared with nearby non-tower nesters, and (5) the influence of powerline corridors on mammalian and avian migration patterns. It is our hope that the questions identified in this study will help stimulate further research so that we can maximize wildlife benefits and minimize wildlife detriments.

  15. Microwave Power Transmission Technologies for SPS

    Science.gov (United States)

    Shinohara, Naoki; Hashimoto, Kozo

    This paper describes the wireless power transmission via microwave (MPT) system for the Space Solar Power Station/Satellite (SPS). The SPS will be hugest space system and we need high efficient, huge, high accurate, light weight and inexpensive phased array for the SPS. Now we do not have any commercial MPT system on ground. Therefore, we have to consider the roadmap of the MPT system from the ground application to the SPS. We propose three step application of the MPT as follows 1st Step: Weak Power Wireless Power Transmission (Ubiquitous Power Source, RF-ID, Energy Harvesting) under Present Radio Wave Configuration or High Power Wireless Power Transmission in Closed Area 2nd Step: High Power Wireless Power Transmission to/from Moving Target/Source with Phased Array under New Radio Wave Configuration (Special Frequency for WPT) on Ground 3rd (Final) Step: Wireless Power Transmission in Space (SPS)

  16. Advanced Power Transmission of the Future

    OpenAIRE

    Rabinowitz, Mario

    2003-01-01

    Electric power is a vital ingredient of modern society. This article is written to provide an insight into the physics and engineering that go into the transmission of electric power and its potential modernization. Topics covered will be Transmission and Distribution, Comparing Overhead and Underground Delivery, Pros and Cons of Underground Delivery, Superconducting Transmission, Cryorisistive Delivery, Hyperconductivity, and Metal-Plated Graphite Fibers.

  17. Integrated analysis software for bulk power system stability

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, T.; Nagao, T.; Takahashi, K. [Central Research Inst. of Electric Power Industry, Tokyo (Japan)

    1994-12-31

    This paper presents Central Research Inst.of Electric Power Industry - CRIEPI`s - own developed three softwares for bulk power network analysis and the user support system which arranges tremendous data necessary for these softwares with easy and high reliability. (author) 3 refs., 7 figs., 2 tabs.

  18. High Voltage Power Transmission for Wind Energy

    Science.gov (United States)

    Kim, Young il

    The high wind speeds and wide available area at sea have recently increased the interests on offshore wind farms in the U.S.A. As offshore wind farms become larger and are placed further from the shore, the power transmission to the onshore grid becomes a key feature. Power transmission of the offshore wind farm, in which good wind conditions and a larger installation area than an onshore site are available, requires the use of submarine cable systems. Therefore, an underground power cable system requires unique design and installation challenges not found in the overhead power cable environment. This paper presents analysis about the benefit and drawbacks of three different transmission solutions: HVAC, LCC/VSC HVDC in the grid connecting offshore wind farms and also analyzed the electrical characteristics of underground cables. In particular, loss of HV (High Voltage) subsea power of the transmission cables was evaluated by the Brakelmann's theory, taking into account the distributions of current and temperature.

  19. Wireless Power Transmission Using Resonance Inductive Coupling

    Directory of Open Access Journals (Sweden)

    Prof. Vishal V. Pande,

    2014-04-01

    Full Text Available In this paper, we present the concept of transmitting power without using wires i.e.transmitting power as Magnetic waves from one place to another is in order to reduce the transmission and distribution losses. This concept is known as Resonance Inductive Coupling (RIC. We also discussed the technological developments in Wireless Power Transmission (WPT. The advantages, disadvantages, biological impacts and applications of WPT are also presented. Wireless power or wireless energy transmission is the transmission of electrical energy from a power source to an electrical load without man-made conductors. Wireless transmission is useful in cases where interconnecting wires are inconvenient, hazardous, or impossible. the proportion of energy received becomes critical only if it is too low for the signal to be distinguished from the background noise. With wireless power, efficiency is the more significant parameter. A large part of the energy sent out by the generating plant must arrive at the receiver or receivers to make the system economical.The most common form of wireless power transmission is carried out using direct induction followed by resonant magnetic induction. Other methods under consideration are electromagnetic radiation in the form of microwaves or lasers and electrical conduction through natural media

  20. Wireless power transmission - Applications and technology status

    Science.gov (United States)

    Schupp, Bradford W.; Brown, Alan M.

    The history of wireless power transmission systems is reviewed and current and future applications and technology are discussed. Design constraints for terrestrial systems, airborne platforms, and space systems are presented.

  1. Transmission and Power Generation Investment under Uncertainty

    OpenAIRE

    Midttun, Nora Sunde; Sletten, Jannicke Soløy

    2015-01-01

    Regulated transmission system operators, (TSOs), need to anticipate generation capacity additions and accommodate future growth when building transmission lines. Given the last decades' deregulation of the European power sectors, EU policymakers are facing the challenge of achieving goals to mitigate climate change since they have relinquished control of the power sector. This challenge has contributed to an increased need for understanding how market participants will respond to TSOs' invest...

  2. Wireless power transmission for battery charging

    Energy Technology Data Exchange (ETDEWEB)

    Mi, Chris; Li, Siqi; Nguyen, Trong-Duy; Wang, Junhua; Li, Jiangui; Li, Weihan; Xu, Jun

    2016-11-15

    A wireless power transmission system is provided for high power applications. The power transmission system is comprised generally of a charging unit configured to generate an alternating electromagnetic field and a receive unit configured to receive the alternating electromagnetic field from the charging unit. The charging unit includes a power source; an input rectifier; an inverter; and a transmit coil. The transmit coil has a spirangle arrangement segmented into n coil segments with capacitors interconnecting adjacent coil segments. The receive unit includes a receive coil and an output rectifier. The receive coil also has a spirangle arrangement segmented into m coil segments with capacitors interconnecting adjacent coil segments.

  3. ULTRA HIGH POWER TRANSMISSION LINE TECHNIQUES

    Science.gov (United States)

    The ultra-high power transmission line techniques including both failure mechanisms and component design are discussed. Failures resulting from...a waveguide. In view of the many advantages of the low loss mode in circular waveguide for ultra-high power levels, a mode transducer and a two...percent of the peak power of a standard rectangular wave guide. Water cooling is provided for high average power operation. Analysis of mode sup pression

  4. Concurrent Wind Cooling in Power Transmission Lines

    Energy Technology Data Exchange (ETDEWEB)

    Jake P Gentle

    2012-08-01

    Idaho National Laboratory and the Idaho Power Company, with collaboration from Idaho State University, have been working on a project to monitor wind and other environmental data parameters along certain electrical transmission corridors. The combination of both real-time historical weather and environmental data is being used to model, validate, and recommend possibilities for dynamic operations of the transmission lines for power and energy carrying capacity. The planned results can also be used to influence decisions about proposed design criteria for or upgrades to certain sections of the transmission lines.

  5. 4th International Conference on Power Transmissions

    CERN Document Server

    2013-01-01

    This books contains the Proceedings of the 4th International Conference on Power Transmissions, that was held in Sinaia, Romania from June 20 -23, 2012. Power Transmissions is a very complex and multi-disciplinary scientific field of Mechanical Engineering that covers the different types of transmissions (mechanical, hydraulic, pneumatic) as well as all the machine elements involved, such as gears, bearings, shafts, couplings and a lot more. It concerns not only their basic theory but also their design, analysis, testing, application and maintenance. The requirements set to modern power transmissions are really tough to meet: They need to be more efficient, stronger, smaller, noiseless, easier to produce and to cost less. There is a strong demand to become easier in operation and maintenance, or even automatic and in maintenance-free. Last but not least, they should be easily recycled and respect the environment. Joint efforts of specialists from both academia and industry can significantly contribute to fulf...

  6. Wireless Power Transmission for Power Supply: State of Art

    OpenAIRE

    2011-01-01

    The wireless power supply is motivated by simple and comfortable use of many small electric appliances with low power input. This paper reviews the concepts which are suitable for wireless power transmission with respect to power supply of such appliances in small areas. The categorization of the concepts is made. The efficiency of the concepts is discussed on general base. The reference levels for exposure to electric and magnetic fields are mentioned, and maximal power delivered to an appli...

  7. Harmonics in transmission power systems

    DEFF Research Database (Denmark)

    Wiechowski, Wojciech Tomasz

    to perform more detailed harmonic studies emerged. Since the transmission network has a complex structure and its impedance varies with frequency in a nonlinear fashion, such harmonic study would require a detailed computer model of the network. Consequently, a PhD project proposal titled "Harmonics....... It is concluded that since some background harmonic distortion is practically always present in the network, a method based on variation of harmonic values must be used. The incremental values of harmonic distortion will allow to verify the harmonic model, despite the existence of background harmonic distortion...... GPS-synchronized OMICRON CMC256 units. Two such units are installed at 400 kV substations at both ends of the disconnected line and a third unit is located at a substation in a distance of 80 km. Time domain "snap-shot" measurements of three-phase voltages and currents are synchronously taken for some...

  8. Transmission Line Adapted Analytical Power Charts Solution

    Science.gov (United States)

    Sakala, Japhet D.; Daka, James S. J.; Setlhaolo, Ditiro; Malichi, Alec Pulu

    2016-08-01

    The performance of a transmission line has been assessed over the years using power charts. These are graphical representations, drawn to scale, of the equations that describe the performance of transmission lines. Various quantities that describe the performance, such as sending end voltage, sending end power and compensation to give zero voltage regulation, may be deduced from the power charts. Usually required values are read off and then converted using the appropriate scales and known relationships. In this paper, the authors revisit this area of circle diagrams for transmission line performance. The work presented here formulates the mathematical model that analyses the transmission line performance from the power charts relationships and then uses them to calculate the transmission line performance. In this proposed approach, it is not necessary to draw the power charts for the solution. However the power charts may be drawn for the visual presentation. The method is based on applying derived equations and is simple to use since it does not require rigorous derivations.

  9. Wind power and transmission grid planning

    Energy Technology Data Exchange (ETDEWEB)

    Matilainen, J.A. [Finnish Transmission System Operator Fingrid, Helsinki (Finland); Haarla, L.C. [Helsinki Univ. of Technology, TKK (Finland). Dept. of Electrical Engineering

    2008-07-01

    This paper presents a method that combines the electricity market and power flow models and describes how they were used for transmission grid planning with large amounts of wind power in the power system. The market model (EMPS) is used by the Nordic Transmission System Operators (TSO), producers and market analysts. There are different possibilities to model the wind power in EMPS and different ways lead to different results. The paper presents a method for analysing the impacts of wind power by modifying the wind power representation in the market model. The paper presents how the purpose of the study (e.g. energy balance or dynamic impacts) should be taken into account when deciding which wind power modelling method to use. Additionally, an example of utilizing the models for planning the Nordic grid is described in this paper. The combined market and power flow software (Samlast) also has grid models inside the price areas and therefore it enables further grid analysis such as dynamic simulations. The paper presents the results of the combined model and different ways of using the results. The combined model can be used both for energy based grid analysis and for support of power flow analysis. The results show that there is a need of transmission grid investments in Finland if 4 GW wind power would be installed. (orig.)

  10. Microwave power engineering generation, transmission, rectification

    CERN Document Server

    Okress, Ernest C

    1968-01-01

    Microwave Power Engineering, Volume 1: Generation, Transmission, Rectification considers the components, systems, and applications and the prevailing limitations of the microwave power technology. This book contains four chapters and begins with an introduction to the basic concept and developments of microwave power technology. The second chapter deals with the development of the main classes of high-power microwave and optical frequency power generators, such as magnetrons, crossed-field amplifiers, klystrons, beam plasma amplifiers, crossed-field noise sources, triodes, lasers. The third

  11. Signal Transmission on Power Lines

    DEFF Research Database (Denmark)

    Dalby, Arne Brejning

    1997-01-01

    In the analysis of power-line networks over a large frequency span, the time-domain method used in programs like EMTP (Electromagnetic Time domain Program) can not be used. A more rigorous analysis method must be employed. The correct analysis method (assuming TEM-mode propagation) for multiple....... An approximate analysis method must be usedIn this paper it is shown that an eigenvectormatrix, that is the propagation modes, can be chosen almost arbitrarily if the frequency interval of interest lies below the frequency, where the line length is about 1/3 times the wavelength for the propagation mode...... with the lowest phase velocity. The propagation constants corresponding to the chosen eigenvector matrix (the quasi modes) are found iteratively, which is a much simpler procedure than finding the eigenvalues....

  12. Testing Selective Transmission with Low Power Listening

    DEFF Research Database (Denmark)

    Hansen, Morten Tranberg; Arroyo-Valles, Rocio; Cid-Sueiro, Jesus

    2010-01-01

    Selective transmission policies allow nodes in a sensor network to autonomously decide between transmitting or discarding packets depending on the importance of the information content and the energetic cost of communications. The potential benefits of these policies depend on the capability...... of nodes to estimate its current energy consumption patterns. As a case study, this paper tests the performance of a particular selective transmission algorithm over a simple network using a low power listening MAC protocol on real sensor node hardware....

  13. Wind power, distrubted generation and transmission

    DEFF Research Database (Denmark)

    Østergaard, Poul Alberg

    Denmark has the World?s highest penetration of wind power in electricity generation with a share of 15.0% of total domestic demand in 2002 (DEA, 2004). This is unevenly distributed in the two electricity systems of Denmark giving a share as high as 20.7% in Western Denmark in 2003 up from 18...... relying on import or export for power balancing. The impacts on the transmission system are furthermore analysed demonstrating that new strategies for balancing power generation and power demand (power balancing strategies) also influence grid losses and the requirements of the transmission grid. If new.......3% in 2002 (Eltra, 2004). At the same time, Denmark has other forms of distributed generation e.g. extensive CHP plants for district heating or for covering industrial heat demands. This results in a relatively high fuel efficiency as well as a technically complex energy system. This article deliberates...

  14. Transmission Characteristics Simulation on Power Line Communications

    Science.gov (United States)

    Kitayama, Masashi; Nakabayashi, Miyuki; Abe, Junichi; Tanabe, Shinji

    In Power Line Communication (PLC) systems, medium and low voltage power distribution lines are used as a communication network. However, since no consideration is given to signal transmission characteristics in the high frequency used for PLC systems, reflections caused by impedance mismatches deteriorate transmission characteristics. If channel characteristics of power lines can be estimated by simulation, it will be efficient for the design and the operation of PLC networks. This paper proposes a method to estimate transmission characteristics of a channel model between a transmitter and a receiver installed on a distribution network. Propagation characteristics of PLC signals at each distribution facility is described using two port networks. A channel model is automatically generated from the combination of component models along the topology of distribution network and the locations of a transmitter and a receiver. The proposed method was validated using measurement data of a test distribution network and was proved to be effective.

  15. Low Power Low Voltage Bulk Driven Balanced OTA

    Directory of Open Access Journals (Sweden)

    Neha Gupta

    2012-01-01

    Full Text Available The last few decades, a great deal of attention has been paid to low-voltage (LV low-power (LP integrated circuits design since the power consumption has become a critical issue. Among many techniques used for the design of LV LP analog circuits, the Bulk-driven principle offers a promising route towards this design for many aspects mainly the simplicity and using the conventional MOS technology to implement these designs. This paper is devoted to the Bulk-driven (BD principle and utilizing this principle to design LV LP building block of Operational Transconductance Amplifier (OTA in standard CMOS processes and supply voltage 0.9V. The simulation results have been carried out by the Spice simulatorusing the 130nm CMOS technology from TSMC.

  16. Low Power Low Voltage Bulk Driven Balanced OTA

    Directory of Open Access Journals (Sweden)

    Neha Gupta

    2011-12-01

    Full Text Available The last few decades, a great deal of attention has been paid to low-voltage (LV low-power (LP integrated circuits design since the power consumption has become a critical issue. Among many techniques used for the design of LV LP analog circuits, the Bulk-driven principle offers a promising route towards this design for many aspects mainly the simplicity and using the conventional MOS technology to implement these designs. This paper is devoted to the Bulk-driven (BD principle and utilizing this principle to design LV LP building block of Operational Trans conductance Amplifier (OTA in standard CMOS processes and supply voltage 0.9 V. The simulation results have been carried out by the Spice simulator using the 130 nm CMOS technology from TSMC.

  17. Low Power Low Voltage Bulk Driven Balanced OTA

    CERN Document Server

    Gupta, Neha; Suthar, Meenakshi; Soni, Priyanka

    2012-01-01

    The last few decades, a great deal of attention has been paid to low-voltage (LV) low-power (LP) integrated circuits design since the power consumption has become a critical issue. Among many techniques used for the design of LV LP analog circuits, the Bulk-driven principle offers a promising route towards this design for many aspects mainly the simplicity and using the conventional MOS technology to implement these designs. This paper is devoted to the Bulk-driven (BD) principle and utilizing this principle to design LV LP building block of Operational Transconductance Amplifier (OTA) in standard CMOS processes and supply voltage 0.9V. The simulation results have been carried out by the Spice simulator using the 130nm CMOS technology from TSMC.

  18. Power Transmission from Large Offshore Wind Farms

    DEFF Research Database (Denmark)

    Pedersen, Jørgen Kaas

    1999-01-01

    for transmitting the power can be by DC. At the moment it is possible to build self-commutating DC/AC-inverters up to about 150 kV. This paper will show a concept to a solution for a wind farm and a transmission system based on synchronous generators or a powerformer® with a rated voltage of 50 kV. The AC power...

  19. Facts controllers in power transmission and distribution

    CERN Document Server

    Padiyar, KR

    2007-01-01

    About the Book: The emerging technology of Flexible AC Transmission System (FACTS) enables planning and operation of power systems at minimum costs, without compromising security. This is based on modern high power electronic systems that provide fast controllability to ensure ''flexible'' operation under changing system conditions. This book presents a comprehensive treatment of the subject by discussing the operating principles, mathematical models, control design and issues that affect the applications. The concepts are explained often with illustrative examples and case studies. In partic

  20. Hydraulic fluid used for power transmission

    Energy Technology Data Exchange (ETDEWEB)

    Heikkilae, M.; Pikulinsky, K.; Leisio, C.

    1996-11-01

    In early October another 50-kilowatt wind turbine was provided with new power transmission technology at the Kopparnaes Energy Park in Inkoo, Finland, west of Helsinki. The new technology is thought to make this wind turbine located on the south coast of Finland more efficient, lighter, and cheaper. Certain aspects of this new technology can be applied to older wind turbines. (orig.)

  1. Hydraulic fluid used for power transmission

    Energy Technology Data Exchange (ETDEWEB)

    Heikkilae, M.; Pikulinsky, K.; Leisio, C.

    1996-11-01

    In early October another 50-kilowatt wind turbine was provided with new power transmission technology at the Kopparnaes Energy Park in Inkoo, Finland, west of Helsinki. The new technology is thought to make this wind turbine located on the south coast of Finland more efficient, lighter, and cheaper. Certain aspects of this new technology can be applied to older wind turbines. (orig.)

  2. Asymmetric operation of AC power transmission systems : the key to optimizing power system reliability and economics

    Energy Technology Data Exchange (ETDEWEB)

    Marceau, R.J. [University of Ontario Inst. of Technology, Oshawa, ON (Canada); McGillis, D.T. [McGill Univ., Montreal, PQ (Canada). Dept. of Electrical and Computer Engineering]|[Concordia Univ., Montreal, PQ (Canada). Dept. of Electrical and Computer Engineering; Sana, A.R.

    2006-07-01

    This book provides an invaluable tool for professionals working in the field of electrical engineering and applied science. It presents a simple and cost-effective strategy to operate alternating current (AC) power transmission systems more reliably and economically. Typically, bulk power transmission systems are operated symmetrically. When a problem such as a short-circuit occurs on a 3-phase line on an individual phase, all 3 phases are taken out of service. Such a strategy is fundamentally inefficient, given that most faults are single-line-to-ground faults. The more effective operating strategy presented in this book is based on the concept of asymmetric operation, which defines the operation of a 3-phase AC transmission line as 3 independently operated entities. As such, a 3-phase line can be operated with 1 or 2 phases out of service for single-line transmission corridors or with 1 , 2 or 3 phases out of service in the case of multiple-line corridors. This approach also maintains 3-phase symmetrical operation at its extremities, thereby protecting loads and power plants from undesirable voltages and currents. The overall integrity of 3-phase transmission is maintained in terms of power delivery, balanced voltages and currents even in the event of failures in part of the transmission system. The result is improved security. 67 refs., 42 tabs., 73 figs., 2 appendices.

  3. Organization of bulk power markets: A concept paper

    Energy Technology Data Exchange (ETDEWEB)

    Kahn, E.; Stoft, S. [Lawrence Berkeley Lab., CA (United States). Energy and Environment Div.

    1995-12-01

    The electricity industry in the US today is at a crossroads. The restructuring debate going on in most regions has made it clear that the traditional model of vertically integrated firms serving defined franchise areas and regulated by state commissions may not be the pattern for the future. The demands of large customers seeking direct access to power markets, the entry of new participants, and proposed reforms of the regulatory process all signify a momentum for fundamental change in the organization of the industry. This paper addresses electricity restructuring from the perspective of bulk power markets. The authors focus attention on the organization of electricity trade and the various ways it has been and might be conducted. Their approach concentrates on conceptual models and empirical case studies, not on specific proposals made by particular utilities or commissions. They review literature in economics and power system engineering that is relevant to the major questions. The objective is to provide conceptual background to industry participants, e.g. utility staff, regulatory staff, new entrants, who are working on specific proposals. While they formulate many questions, they do not provide definitive answers on most issues. They attempt to put the industry restructuring dialogue in a neutral setting, translating the language of economists for engineers and vice versa. Towards this end they begin with a review of the basic economic institutions in the US bulk power markets and a summary of the engineering practices that dominate trade today.

  4. Modeling and simulation of bulk gallium nitride power semiconductor devices

    Directory of Open Access Journals (Sweden)

    G. Sabui

    2016-05-01

    Full Text Available Bulk gallium nitride (GaN power semiconductor devices are gaining significant interest in recent years, creating the need for technology computer aided design (TCAD simulation to accurately model and optimize these devices. This paper comprehensively reviews and compares different GaN physical models and model parameters in the literature, and discusses the appropriate selection of these models and parameters for TCAD simulation. 2-D drift-diffusion semi-classical simulation is carried out for 2.6 kV and 3.7 kV bulk GaN vertical PN diodes. The simulated forward current-voltage and reverse breakdown characteristics are in good agreement with the measurement data even over a wide temperature range.

  5. Effect of bulk modulus on performance of a hydrostatic transmission control system

    Indian Academy of Sciences (India)

    Ali Volkan Akkaya

    2006-10-01

    In this paper, we examine the performance of PID (proportional integral derivative) and fuzzy controllers on the angular velocity of a hydrostatic transmission system by means of Matlab-Simulink. A very novel aspect is that it includes the analysis of the effect of bulk modulus on system control. Simulation results demonstrates that bulk modulus should be considered as a variable parameter to obtain a more realistic model. Additionally, a PID controller is insufficient in presence of variable bulk modulus, whereas a fuzzy controller provides robust angular velocity control.

  6. Acoustic Power Transmission Through a Ducted Fan

    Science.gov (United States)

    Envia, Ed

    2016-01-01

    For high-speed ducted fans, when the rotor flowfield is shock-free, the main contribution to the inlet radiated acoustic power comes from the portion of the rotor stator interaction sound field that is transmitted upstream through the rotor. As such, inclusion of the acoustic transmission is an essential ingredient in the prediction of the fan inlet noise when the fan tip relative speed is subsonic. This paper describes a linearized Euler based approach to computing the acoustic transmission of fan tones through the rotor. The approach is embodied in a code called LINFLUX was applied to a candidate subsonic fan called the Advanced Ducted Propulsor (ADP). The results from this study suggest that it is possible to make such prediction with sufficient fidelity to provide an indication of the acoustic transmission trends with the fan tip speed.

  7. Transmission of Power to the Island Using HVDC

    Directory of Open Access Journals (Sweden)

    B. Vijayalakshmi

    2012-09-01

    Full Text Available HVDC transmission is more effective andeconomically cheaper where bulk power is to betransmitted over long distance. Hence the surpluspower from a remote place can be exported to theneedy place at cheaper rate. The HVDC systemrequire only one transmission wire and the groundreturn or seawater can be used as an another line.The Lakshadweep Island is located at faraway placefrom the northeast part of India where the surpluspower is available. The seawater for return path isavailable. The diesel for D.G set is transported fromIndian mainland through ship where lot of economyis lost only for transportation. In this paper thetransmission of HVDC from Indian mainland toLakshadweep is analyzed at economically cheaperrate.

  8. Geotechnical assessments of upgrading power transmission lines

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Andrew [Coffey Geotechnics Ltd., Harrogate (United Kingdom)

    2012-11-01

    One of the consequences of increasing demand for energy is a corresponding requirement for increased energy distribution. This trend is likely to be magnified by the current tendency to generate power in locations remote from centres of population. New power transmission routes are expensive and awkward to develop, and there are therefore benefits to be gained by upgrading existing routes. However, this in turn raises problems of a different nature. The re-use of any structure must necessarily imply the acceptance of unknowns. The upgrading of transmission lines is no exception to this, particularly when assessing foundations, which in their nature are not visible. A risk-based approach is therefore used. This paper describes some of the geotechnical aspects of the assessment of electric power transmission lines for upgrading. It briefly describes the background, then discusses some of the problems encountered and the methods used to address them. These methods are based mainly on information obtained from desk studies and walkover surveys, with a limited amount of intrusive investigation. (orig.)

  9. 77 FR 22312 - Geomagnetic Disturbances to the Bulk-Power System; Notice of Technical Conference

    Science.gov (United States)

    2012-04-13

    ... Energy Regulatory Commission Geomagnetic Disturbances to the Bulk-Power System; Notice of Technical... Conference on Geomagnetic Disturbances to the Bulk-Power System on Monday, April 30, 2012, from 11 a.m. to 4... issues related to reliability of the Bulk-Power System as affected by geomagnetic disturbances....

  10. High output power electric motors with bulk HTS elements

    Science.gov (United States)

    Kovalev, L. K.; Ilushin, K. V.; Kovalev, K. L.; Penkin, V. T.; Poltavets, V. N.; Koneev, S. M.-A.; Akimov, I. I.; Gawalek, W.; Oswald, B.; Krabbes, G.

    2003-04-01

    New types of electric machines with the rotors containing bulk HTS (YBCO and Bi-Ag) elements are presented. Different schematics of hysteresis, reluctance, “trapped field” and composed synchronous HTS machines are discussed. The two-dimensional mathematical models describing the processes in such types of HTS machines were developed on the basis of the theoretical analysis of the electrodynamic and hysteresis processes in the single-domain and polycrystal YBCO ceramic samples and plate shape Bi-Ag elements. The test results of the series of hysteresis, reluctance, “trapped field” and composed with permanent magnets HTS motors with output power rating 0.1-18 kW and current frequency 50 and 400 Hz are given. These results show that in the media of liquid nitrogen the specific output power per one weight unit of HTS motors is 4-7 times better than for conventional electric machines. Comparison of the theoretical and experimental characteristics of the developed HTS motors show that they are in good agreement. The test results for liquid nitrogen cryogenic pump system with hysteresis 500 W HTS motor are discussed. The designs and first test results of HTS motor operating in the media of liquid nitrogen with output power 100 kW and power factor more than 0.8 are given. Future development and applications of new types of HTS motors for aerospace technology, on-land industry and transport systems are discussed.

  11. Water-hydraulic power transmission for offshore wind farms

    NARCIS (Netherlands)

    Diepeveen, N.F.B.; Jarquin Laguna, A.; Kempenaar, A.S.

    2012-01-01

    The current state of the art of offshore wind turbine power transmission technology is expensive, heavy and maintenance intensive. The Delft Offshore Turbine project considers a radically new concept for power transmission in an offshore wind farm: using seawater as power transmission medium. For th

  12. Water-hydraulic power transmission for offshore wind farms

    NARCIS (Netherlands)

    Diepeveen, N.F.B.; Jarquin Laguna, A.; Kempenaar, A.S.

    2012-01-01

    The current state of the art of offshore wind turbine power transmission technology is expensive, heavy and maintenance intensive. The Delft Offshore Turbine project considers a radically new concept for power transmission in an offshore wind farm: using seawater as power transmission medium. For

  13. 29 CFR 1910.219 - Mechanical power-transmission apparatus.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 5 2010-07-01 2010-07-01 false Mechanical power-transmission apparatus. 1910.219 Section... Mechanical power-transmission apparatus. (a) General requirements. (1) This section covers all types and... apparatus located in basements. All mechanical power transmission apparatus located in basements,...

  14. 29 CFR 1926.307 - Mechanical power-transmission apparatus.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 8 2010-07-01 2010-07-01 false Mechanical power-transmission apparatus. 1926.307 Section....307 Mechanical power-transmission apparatus. (a) General requirements. (1) This section covers all... mechanical power transmission apparatus located in basements, towers, and rooms used exclusively for...

  15. Parameters optimization for magnetic resonance coupling wireless power transmission.

    Science.gov (United States)

    Li, Changsheng; Zhang, He; Jiang, Xiaohua

    2014-01-01

    Taking maximum power transmission and power stable transmission as research objectives, optimal design for the wireless power transmission system based on magnetic resonance coupling is carried out in this paper. Firstly, based on the mutual coupling model, mathematical expressions of optimal coupling coefficients for the maximum power transmission target are deduced. Whereafter, methods of enhancing power transmission stability based on parameters optimal design are investigated. It is found that the sensitivity of the load power to the transmission parameters can be reduced and the power transmission stability can be enhanced by improving the system resonance frequency or coupling coefficient between the driving/pick-up coil and the transmission/receiving coil. Experiment results are well conformed to the theoretical analysis conclusions.

  16. Parameters Optimization for Magnetic Resonance Coupling Wireless Power Transmission

    Directory of Open Access Journals (Sweden)

    Changsheng Li

    2014-01-01

    Full Text Available Taking maximum power transmission and power stable transmission as research objectives, optimal design for the wireless power transmission system based on magnetic resonance coupling is carried out in this paper. Firstly, based on the mutual coupling model, mathematical expressions of optimal coupling coefficients for the maximum power transmission target are deduced. Whereafter, methods of enhancing power transmission stability based on parameters optimal design are investigated. It is found that the sensitivity of the load power to the transmission parameters can be reduced and the power transmission stability can be enhanced by improving the system resonance frequency or coupling coefficient between the driving/pick-up coil and the transmission/receiving coil. Experiment results are well conformed to the theoretical analysis conclusions.

  17. Transmission Of Power Via Combined Laser Beams

    Science.gov (United States)

    Kwon, Jin H.; Lee, Ja H.

    1992-01-01

    Laser Diode Array (LDA) appears to be most efficient means of transferring power from Earth to satellites and between satellites, in terms of mass and size, of various laser configurations. To form large-scale-array amplifier (LSAA), element LDA's must generate well-defined diffraction-limited beams. Coherent matching of phases among LDA's enables system to generate good beam pattern in far field over thousands of kilometers. By passing beam from master laser through number of LDA amplifiers simultaneously, one realizes coherence among amplified output beams. LSAA used for transmission of power with efficiency of approximately 80 percent into receiver of moderate size at 5,000 km. Also transmits data at high rates by line-of-sight rather than fiber optics.

  18. Wireless Power Transmission Options for Space Solar Power

    Science.gov (United States)

    Potter, Seth; Davis, Dean; Born, Martin; Bayer, Martin; Howell, Joe; Mankins, John

    2008-01-01

    Space Solar Power (SSP), combined with Wireless Power Transmission (WPT), offers the far-term potential to solve major energy problems on Earth. In the long term, we aspire to beam energy to Earth from geostationary Earth orbit (GEO), or even further distances in space. In the near term, we can beam power over more moderate distances, but still stretch the limits of today s technology. In recent studies, a 100 kWe-class "Power Plug" Satellite and a 10 kWe-class Lunar Polar Solar Power outpost have been considered as the first steps in using these WPT options for SSP. Our current assessments include consideration of orbits, wavelengths, and structural designs to meet commercial, civilian government, and military needs. Notional transmitter and receiver sizes are considered for use in supplying 5 to 40 MW of power. In the longer term, lunar or asteroidal material can be used. By using SSP and WPT technology for near-term missions, we gain experience needed for sound decisions in designing and developing larger systems to send power from space to Earth.

  19. CAPITAL INVESTMENT CRITERION FOR BULK ELECTRICITY TRANSMISSION INFRASTRUCTURE: A CONSUMPTION APPROACH

    Directory of Open Access Journals (Sweden)

    R.D. Smith

    2012-01-01

    Full Text Available The primary technical function of an electric utility company is to supply electrical energy to its customers economically and at acceptable levels of reliability. The aspects of economics and reliability are however, competing constraints, since increased reliability of supply generally requires increased capital investment, which leads to higher prices for electricity.
    Traditional capital budgeting criteria, such as positive net present value, have been found to inhibit sound economic capital investment decision-making within the bulk electricity transmission environment. It is submitted that the results of this investigation will enable the operators of bulk electricity transmission systems to match the level of investment in reliability related infrastructure, with customers’ reliability preferences. To do this it is necessary to incorporate the economic valueof- service reliability to customers into the economic evaluation used by utility planners.

  20. Study of a conceptual nuclear energy center at Green River, Utah. Power demand, load center assessment and transmission

    Energy Technology Data Exchange (ETDEWEB)

    Smith, D.R.; Thaik, A.; Pingel, P.

    1982-02-01

    This document constitutes a segment of a feasibility study investigating the ramification of constructing a nuclear energy center in an arid western region. In this phase of the study. The projected power demands and load center locations were reviewed and assessed. Alternative transmission systems were analysed and a conceptual transmission for bulk power transportation is proposed with potential line routes. Environmental impacts of the proposed transmission were also identified.

  1. Line Capacity Expansion and Transmission Switching in Power Systems With Large-Scale Wind Power

    DEFF Research Database (Denmark)

    Villumsen, Jonas Christoffer; Bronmo, Geir; Philpott, Andy B.

    2013-01-01

    of power generation. We allow for active switching of transmission elements to reduce congestion effects caused by Kirchhoff's voltage law. Results show that actively switching transmission lines may yield a better utilization of transmission networks with large-scale wind power and increase wind power...... penetration. Furthermore, it is shown that transmission switching is likely to affect the optimal line capacity expansion plan....

  2. A Tandem Communication Network with Dynamic Bandwidth Allocation and Modified Phase Type Transmission having Bulk Arrivals

    Directory of Open Access Journals (Sweden)

    Kuda Nageswara Rao

    2010-07-01

    Full Text Available This paper deals with the performance evaluation of a two node communication network with dynamic bandwidth allocation and modified phase type transmission having bulk arrivals. The performance of the statistical multiplexing is measured by approximating with the compound Poisson process and the transmission completions with Poisson processes. It is further assumed that the transmission rate at each node are adjusted depending upon the content of the buffer which is connected to it. The packets transmitted through the first node may be forwarded to the buffer connected to the second node or get terminated with certain probabilities. The performance measures of the network like, mean content of the buffers, mean delays, throughput, transmitter utilization etc. are derived explicitly under transient conditions. Sensitivity analysis with respect to the parameters is also carried through numerical illustration. It is observed that the dynamic bandwidth allocation and batch size distribution of arrivals has a tremendous influence on the performance measures.

  3. Robot Vibrations Caused by Torque Ripples in Power Transmission Mechanisms

    OpenAIRE

    小島, 宏行; 田口, 和哉; 辻, 浩明

    1989-01-01

    When an industrial robot with a power transmission mechanism such as a harmonic drive gear is operated, vibrations resulting from the torque ripple of the power transmission mechanism are frequently generated. However, few studies on robot vibration characteristics owing to torque ripples have been reported. In this paper, the vibrations of a horizontal two-link robot are investigated with consideration given to the torque ripple and the nonlinearity of the power transmission mechanism. In th...

  4. 76 FR 64082 - Mandatory Reliability Standards for the Bulk-Power System; Notice of Staff Meeting

    Science.gov (United States)

    2011-10-17

    ... Energy Regulatory Commission Mandatory Reliability Standards for the Bulk-Power System; Notice of Staff...\\ Mandatory Reliability Standards for the Bulk-Power System, Order No. 693, FERC Stats. & Regs. ] 31,242... Discussion on the reliability issues relating to ``Single Point of Failure on Protection Systems,'' on...

  5. 75 FR 52528 - Mandatory Reliability Standards for the Bulk-Power System; Notice of Technical Conference

    Science.gov (United States)

    2010-08-26

    ... Energy Regulatory Commission Mandatory Reliability Standards for the Bulk-Power System; Notice of... ] 61,053 (2007). \\2\\ Mandatory Reliability Standards for the Bulk Power System, 130 FERC ] 61,218... a frequency response requirement.'' \\3\\ \\1\\ Mandatory Reliability Standards for the...

  6. 77 FR 24952 - Staff Technical Conference on Geomagnetic Disturbances to the Bulk-Power System; Technical...

    Science.gov (United States)

    2012-04-26

    .... to 4:00 p.m. to discuss issues related to the reliability of the Bulk-Power System as affected by... currents to transformers and other equipment on the Bulk-Power System, as well as, options for addressing... Energy Regulatory Commission Staff Technical Conference on Geomagnetic Disturbances to the...

  7. 32 CFR 644.431 - Power transmission lines.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 4 2010-07-01 2010-07-01 true Power transmission lines. 644.431 Section 644.431... ESTATE HANDBOOK Disposal Disposal of Fee-Owned Real Property and Easement Interests § 644.431 Power transmission lines. (a) Authority. Pursuant to the provisions of section 13(d) of the Surplus Property Act...

  8. Stabilizing control for power converters connected to transmission lines

    NARCIS (Netherlands)

    Zainea, Marius; Schaft, Arjan van der; Buisson, Jean

    2007-01-01

    This paper proposes a switching control strategy for the set-point stabilization of a power converter connected via a transmission line to a resistive load. The strategy employs a Lyapunov function that is directly based on energy considerations of the power converter, as well as of the transmission

  9. Characteristics on Hydro-mechanical Transmission in Power Shift Process

    Institute of Scientific and Technical Information of China (English)

    HU Jibin; WEI Chao; YUAN Shihua; JING Chongbo

    2009-01-01

    To improve the vehicular power and acceleration performance and reduce the shift impact, the study of the characteristics on power shift is necessary. Based on the flexible hydraulic unit of hydro-mechanical transmission, this paper explores the feasibility of shift without power interruption. With the four models concerning displacement ratio, rotational speed, rotational torque and power at ideal shift point, the characteristics on power shift in different running conditions are analyzed, and the rules of power shift are revealed.The theoretical analysis and test results show that the hydro-mechanical transmission can shift without power interruption in different running conditions. Furthermore, there exists an ideal shift point in theory, at which point the cycle power in hydro-mechanical transmission can't be generated, and the impact on the system can be reduced to the minimum. However, if before or after this ideal shift point, a cycle power can be generated.

  10. Study for wireless power transmission of nuclear robot system

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jongseog [Central Research Institute of Korea Hydro and Nuclear Power Co., Daejeon (Korea, Republic of)

    2013-05-15

    Gasoline engine or electric motor is generally used for driving power of working. Gasoline tank is uncomfortable to carry. Battery capacity does not sustain long time working. Frequent moving back of robot to power charger or refueling tank is inconvenient. Long power cable connection occur winding problem if there are complex structures in walking way. We need some solution for continuous supply of robot energy at the free moving condition of robot. 'Wireless power transmission' is one of the solutions. Some experiment result to transmit wireless power to moving robot is described herein. To find possible wireless power transmission method for nuclear robot, wireless power transmission tests were performed. As result of these tests, it was confirmed that wireless power transmission by using dipole and mat type magnetic induction were possible. As result of flying robot experiment, it was realized that development of light weight core for receiver and wave reflection device for high directional transmitter are necessary for practical use of the dipole type wireless power transmission. Small size core and high directional transmitter will be next target. Mat type wireless power transmission is regarded as useful for robot power charging station in the inside containment.

  11. Study on Capability of Power Transmission from West to East in China Southern Power Grid

    Institute of Scientific and Technical Information of China (English)

    Li Wei; Tong Mingdong; Zhang Lin; Xu Dongjie; Lin Feng; Li Xin; Zuo Zhengmin

    2007-01-01

    @@ The uneven distribution of economic development and energy resources in the Southern Power Grid, yet with stronger complementary superiority has determined the necessity to actively push forward power transmission from west to east in the Southern Power Grid and realize optimal disposition in even greater scope. To further promote transmission capability and operational security from west to east, measures including power sources disposition, unit starting schemes, power grid configuration, DC modulation and application of new transmission technologies are analyzed in this paper.

  12. Nanostructured Bulk Thermoelectric Generator for Efficient Power Harvesting for Self-powered Sensor Networks

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Yanliang [Idaho National Lab. (INL), Idaho Falls, ID (United States); Butt, Darryl [Idaho National Lab. (INL), Idaho Falls, ID (United States); Agarwal, Vivek [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-07-01

    The objective of this Nuclear Energy Enabling Technology research project is to develop high-efficiency and reliable thermoelectric generators for self-powered wireless sensors nodes utilizing thermal energy from nuclear plant or fuel cycle. The power harvesting technology has crosscutting significance to address critical technology gaps in monitoring nuclear plants and fuel cycle. The outcomes of the project will lead to significant advancement in sensors and instrumentation technology, reducing cost, improving monitoring reliability and therefore enhancing safety. The self-powered wireless sensor networks could support the long-term safe and economical operation of all the reactor designs and fuel cycle concepts, as well as spent fuel storage and many other nuclear science and engineering applications. The research is based on recent breakthroughs in high-performance nanostructured bulk (nanobulk) thermoelectric materials that enable high-efficiency direct heat-to-electricity conversion over a wide temperature range. The nanobulk thermoelectric materials that the research team at Boise State University and University of Houston has developed yield up to a 50% increase in the thermoelectric figure of merit, ZT, compared with state-of-the-art bulk counterparts. This report focuses on the selection of optimal thermoelectric materials for this project. The team has performed extensive study on two thermoelectric materials systems, i.e. the half-Heusler materials, and the Bismuth-Telluride materials. The report contains our recent research results on the fabrication, characterization and thermoelectric property measurements of these two materials.

  13. ORCED: A model to simulate the operations and costs of bulk-power markets

    Energy Technology Data Exchange (ETDEWEB)

    Hadley, S.; Hirst, E.

    1998-06-01

    Dramatic changes in the structure and operation of US bulk-power markets require new analytical tools. The authors developed the Oak Ridge Competitive Electricity Dispatch (ORCED) model to analyze a variety of public-policy issues related to the many changes underway in the US electricity industry. Such issues include: policy and technology options to reduce carbon emissions from electricity production; the effects of electricity trading between high- and low-cost regions on consumers and producers in both regions; the ability of the owners of certain generating units to exercise market power as functions of the transmission link between two regions and the characteristics of the generating units and loads in each region; and the market penetration of new energy-production and energy-use technologies and the effects of their adoption on fuel use, electricity use and costs, and carbon emissions. ORCED treats two electrical systems connected by a single transmission link ORCED uses two load-duration curves to represent the time-varying electricity consumption in each region. The two curves represent peak and offpeak seasons. User specification of demand elasticities permits ORCED to estimate the effects of changes in electricity price, both overall and hour by hour, on overall electricity use and load shapes. ORCED represents the electricity supply in each region with 26 generating units. The two regions are connected by a single transmission link. This link is characterized by its capacity (MW), cost ({cents}/kWh), and losses (%). This report explains the inputs to, outputs from, and operation of ORCED. It also presents four examples showing applications of the model to various public-policy issues related to restructuring of the US electricity industry.

  14. Transmission of Power to the Island Using HVDC (From Indian continent to Lakshadweep island

    Directory of Open Access Journals (Sweden)

    B. Vijayalakshmi

    2012-09-01

    Full Text Available HVDC transmission is more effective and economically cheaper where bulk power is to be transmitted over long distance. Hence the surplus power from a remote place can be exported to the needy place at cheaper rate. The HVDC system require only one transmission wire and the ground return or seawater can be used as an another line. The Lakshadweep Island is located at faraway place from the northeast part of India where the surplus power is available. The seawater for return path is available. The diesel for D.G set is transported from Indian mainland through ship where lot of economy is lost only for transportation. In this paper the transmission of HVDC from Indian mainland to Lakshadweep is analyzed at economically cheaper rate.

  15. Power Transmission by Optical Fibers for Component Inherent Communication

    Directory of Open Access Journals (Sweden)

    Michael Dumke

    2010-02-01

    Full Text Available The use of optical fibers for power transmission has been investigated intensely. An optically powered device combined with optical data transfer offers several advantages compared to systems using electrical connections. Optical transmission systems consist of a light source, a transmission medium and a light receiver. The overall system performance depends on the efficiency of opto-electronic converter devices, temperature and illumination dependent losses, attenuation of the transmission medium and coupling between transmitter and fiber. This paper will summarize the state of the art for optically powered systems and will discuss reasons for negative influences on efficiency. Furthermore, an outlook on power transmission by the use of a new technology for creating polymer optical fibers (POF via micro dispensing will be given. This technology is capable to decrease coupling losses by direct contacting of opto-electronic devices.

  16. Independent transmission system operators and their role in maintaining reliability in a restructured electric power industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-01-01

    This report summarizes the current status of proposals to form Independent System Operators (ISOs) to operate high-voltage transmission systems in the United States and reviews their potential role in maintaining bulk power system reliability. As background information, the likely new industry structure, nature of deregulated markets, and institutional framework for bulk power system reliability are reviewed. The report identifies issues related to the formation of ISOs and their roles in markets and in reliability, and describes potential policy directions for encouraging the formation of effective ISOs and ensuring bulk system reliability. Two appendices are provided, which address: (1) system operation arrangements in other countries, and (2) summaries of regional U.S. ISO proposals.

  17. Independent transmission system operators and their role in maintaining reliability in a restructured electric power industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-01-01

    This report summarizes the current status of proposals to form Independent System Operators (ISOs) to operate high-voltage transmission systems in the United States and reviews their potential role in maintaining bulk power system reliability. As background information, the likely new industry structure, nature of deregulated markets, and institutional framework for bulk power system reliability are reviewed. The report identifies issues related to the formation of ISOs and their roles in markets and in reliability, and describes potential policy directions for encouraging the formation of effective ISOs and ensuring bulk system reliability. Two appendices are provided, which address: (1) system operation arrangements in other countries, and (2) summaries of regional U.S. ISO proposals.

  18. Demonstration of microwave power transmission in space

    Science.gov (United States)

    Chang, K.; Patton, A. D.; Kennedy, M. O.; Little, F. E.; Pollock, M. A.; Hummer, K. A.; Mccleary, J. C.; Wei, B. S.; Brown, A. M.; Mcspadden, J.O.

    1991-01-01

    Three experiments are proposed to demonstrate the feasibility of converting dc power into microwave or millimeter-wave beam and transmitting it to users through free space. The generator could be located on earth or on a utility power satellite. The received power would be converted back into dc or ac power. The success of the experiments could lead to the commercial use of this technology.

  19. Transmission electron microscopy of bulk specimens over 10µm in thickness.

    Science.gov (United States)

    Sadamatsu, Sunao; Tanaka, Masaki; Higashida, Kenji; Matsumura, Syo

    2016-03-01

    We succeeded the observation of microstructures in bulk-sized specimens of over 10µm in thickness by employing a technique that combines transmission electron microscopy (TEM) with energy-filtered imaging based on electron energy-loss spectroscopy (EELS). This method is unique in that it incorporates the inelastically scattered electrons into the imaging process. Using this technique, bright and sharp images of dislocations in crystalline silicon specimens as thick as 10µm were obtained. A calibration curve to determine foil thickness of such a thick specimen was also derived. This method simply extends the observable thickness range in TEM. If combined with tilt series of observation over a significant range of angle, it will disclose three dimensional nanostructures in a µm-order block of a specimen, promoting our understanding of the controlling mechanisms behind various bulky material properties. Copyright © 2015 The Authors. Published by Elsevier B.V. All rights reserved.

  20. Enabling lunar and space missions by laser power transmission

    Science.gov (United States)

    Deyoung, R. J.; Nealy, J. E.; Humes, D. H.; Meador, W. E.

    1992-01-01

    Applications are proposed for laser power transmission on the Moon. A solar-pumped laser in lunar orbit would beam power to the lunar surface for conversion into either electricity or propulsion needs. For example, lunar rovers could be much more flexible and lighter than rovers using other primary power sources. Also, laser power could be absorbed by lunar soil to create a hard glassy surface for dust-free roadways and launch pads. Laser power could also be used to power small lunar rockets or orbital transfer vehicles, and finally, photovoltaic laser converters could power remote excavation vehicles and human habitats. Laser power transmission is shown to be a highly flexible, enabling primary power source for lunar missions.

  1. Enabling lunar and space missions by laser power transmission

    Science.gov (United States)

    De Young, R. J.; Nealy, J. E.; Humes, D. H.; Meador, W. E.

    1992-09-01

    Applications are proposed for laser power transmission on the Moon. A solar-pumped laser in lunar orbit would beam power to the lunar surface for conversion into either electricity or propulsion needs. For example, lunar rovers could be much more flexible and lighter than rovers using other primary power sources. Also, laser power could be absorbed by lunar soil to create a hard glassy surface for dust-free roadways and launch pads. Laser power could also be used to power small lunar rockets or orbital transfer vehicles, and finally, photovoltaic laser converters could power remote excavation vehicles and human habitats. Laser power transmission is shown to be a highly flexible, enabling primary power source for lunar missions.

  2. 75 FR 57764 - Mandatory Reliability Standards for the Bulk Power System; Supplemental Notice of Technical...

    Science.gov (United States)

    2010-09-22

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Mandatory Reliability Standards for the Bulk Power System; Supplemental Notice of Technical Conference September 14, 2010. On August 19, 2010 the Federal Energy...

  3. 75 FR 59261 - Mandatory Reliability Standards for the Bulk Power System; Supplemental Notice of Technical...

    Science.gov (United States)

    2010-09-27

    ... From the Federal Register Online via the Government Publishing Office ] DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Mandatory Reliability Standards for the Bulk Power System; Supplemental Notice of Technical Conference September 17, 2010. On August 19, 2010 the Federal...

  4. Reinforcing Power Grid Transmission with FACTS Devices

    CERN Document Server

    Frolov, Vladimir; Chertkov, Misha

    2013-01-01

    We explore optimization methods for planning the placement, sizing and operations of Flexible Alternating Current Transmission System (FACTS) devices installed into the grid to relieve congestion created by load growth or fluctuations of intermittent renewable generation. We limit our selection of FACTS devices to those that can be represented by modification of the inductance of the transmission lines. Our master optimization problem minimizes the $l_1$ norm of the FACTS-associated inductance correction subject to constraints enforcing that no line of the system exceeds its thermal limit. We develop off-line heuristics that reduce this non-convex optimization to a succession of Linear Programs (LP) where at each step the constraints are linearized analytically around the current operating point. The algorithm is accelerated further with a version of the cutting plane method greatly reducing the number of active constraints during the optimization, while checking feasibility of the non-active constraints post...

  5. Transmission Cost Allocation Methodologies for Regional Transmission Organizations

    Energy Technology Data Exchange (ETDEWEB)

    Fink, S.; Rogers, J.; Porter, K.

    2010-07-01

    This report describes transmission cost allocation methodologies for transmission projects developed to maintain or enhance reliability, to interconnect new generators, or to access new resources and enhance competitive bulk power markets, otherwise known as economic transmission projects.

  6. Optimal Operation of Energy Storage in Power Transmission and Distribution

    OpenAIRE

    2015-01-01

    In this thesis, we investigate optimal operation of energy storage units in power transmission and distribution grids. At transmission level, we investigate the problem where an investor-owned independently-operated energy storage system seeks to offer energy and ancillary services in the day-ahead and real-time markets. We specifically consider the case where a significant portion of the power generated in the grid is from renewable energy resources and there exists significant uncertainty i...

  7. 76 FR 10583 - Priorities for Addressing Risks to the Reliability of the Bulk-Power System; Notice Establishing...

    Science.gov (United States)

    2011-02-25

    ... Energy Regulatory Commission Priorities for Addressing Risks to the Reliability of the Bulk- Power System... reliability of the Bulk-Power System, as previously announced.\\1\\ Any entity or person wishing to submit... Priorities for Addressing Risks to the Reliability of the Bulk-Power System, 76 FR 2369 (January 13,...

  8. Fast Decoupled Power Flow for Power System with High Voltage Direct Current Transmission Line System

    Directory of Open Access Journals (Sweden)

    Prechanon Kumkratug

    2010-01-01

    Full Text Available Problem statement: High voltage direct current transmission line system has been widely applied for control power flow in power system. The power flow analysis was the one of powerful tools by which the power system equipped was analyzed both for planning and operation strategies. Approach: This study presented the method to analyze power flow of power system consisted of HVDC system. HVDC was modeled as the complex power injections. The presented complex power injected was incorporated into the existing power flow program based on fast decoupled method. The presented method was tested on the multimachine power system. Results: The transmission line loss of the system with and without HVDC was compared. Conclusion: From the simulation results, the HVDC can reduce transmission line loss of power system.

  9. Energy losses of superconducting power transmission cables in the grid

    DEFF Research Database (Denmark)

    Østergaard, Jacob; Okholm, Jan; Lomholt, Karin

    2001-01-01

    One of the obvious motives for development of superconducting power transmission cables is reduction of transmission losses. Loss components in superconducting cables as well as in conventional cables have been examined. These losses are used for calculating the total energy losses of conventional...... as well as superconducting cables when they are placed in the electric power transmission network. It is concluded that high load connections are necessary to obtain energy saving by the use of HTSC cables. For selected high load connections, an energy saving of 40% is expected. It is shown...... that the thermal insulation and cooling machine efficiency are the most important loss element in a superconducting cable system...

  10. Diode laser power module for beamed power transmission

    Science.gov (United States)

    Choi, S. H.; Williams, M. D.; Lee, J. H.; Conway, E. J.

    1991-01-01

    Recent progress with powerful, efficient, and coherent monolithic diode master-oscillator/power-amplifier (M-MOPA) systems is promising for the development of a space-based diode laser power station. A conceptual design of a 50-kW diode laser power module was made for space-based power stations capable of beaming coherent power to the moon, Martian rovers, or other satellites. The laser diode power module consists of a solar photovoltaic array or nuclear power source, diode laser arrays (LDAs), a phase controller, beam-steering optics, a thermal management unit, and a radiator. Thermal load management and other relevant aspects of the system (such as power requirements and system mass) are considered. The 50-kW power module described includes the highest available efficiency of LD M-MOPA system to date. However, the overall efficiency of three amplifier stages, including the coupling efficiency, turns out to be 55.5 percent. Though a chain of PA stages generates a high-power coherent beam, there is a penalty due to the coupling loss between stages. The specific power of the 50-kW module using solar power is 6.58 W/kg.

  11. 78 FR 65641 - Recommendation From the Western Area Power Administration To Pursue Regional Transmission...

    Science.gov (United States)

    2013-11-01

    ... Transmission Organization Membership AGENCY: Western Area Power Administration, DOE. ACTION: Notice of Western Area Power Administration Recommendation to Pursue Regional Transmission Organization Membership... formal negotiations with the Southwest Power Pool (SPP), a Regional Transmission Organization...

  12. Optimisation of VSC-HVDC Transmission for Wind Power Plants

    DEFF Research Database (Denmark)

    Silva, Rodrigo Da

    Connection of Wind Power Plants (WPP), typically oshore, using VSCHVDC transmission is an emerging solution with many benefits compared to the traditional AC solution, especially concerning the impact on control architecture of the wind farms and the grid. The VSC-HVDC solution is likely to meet...... more stringent grid codes than a conventional AC transmission connection. The purpose of this project is to analyse how HVDC solution, considering the voltage-source converter based technology, for grid connection of large wind power plants can be designed and optimised. By optimisation, the project...... the requirements established by the operators in the multiterminal VSC-HVDC transmission system. Moreover, the possibility in minimising the overall transmission losses can be a solution for small grids and the minimisation in the dispatch error is a new solution for power deliver maximisation. The second study...

  13. Five Mass Power Transmission Line of a Ship Computer Modelling

    Directory of Open Access Journals (Sweden)

    Kazakoff Alexander Borisoff

    2016-03-01

    Full Text Available The work, presented in this paper, appears to be a natural continuation of the work presented and reported before, on the design of power transmission line of a ship, but with different multi-mass model. Some data from the previous investigations are used as a reference data, mainly from the analytical investigations, for the developed in the previ- ous study, frequency and modal analysis of a five mass model of a power transmission line of a ship. In the paper, a profound dynamic analysis of a concrete five mass dynamic model of the power transmission line of a ship is performed using Finite Element Analysis (FEA, based on the previously recommended model, investigated in the previous research and reported before. Thus, the partially validated by frequency analysis five mass model of a power transmission line of a ship is subjected to dynamic analysis. The objective of the work presented in this paper is dynamic modelling of a five mass transmission line of a ship, partial validation of the model and von Mises stress analysis calculation with the help of Finite Element Analysis (FEA and comparison of the derived results with the analytically calculated values. The partially validated five mass power transmission line of a ship can be used for definition of many dy- namic parameters, particularly amplitude of displacement, velocity and acceleration, respectively in time and frequency domain. The frequency behaviour of the model parameters is investigated in frequency domain and it corresponds to the predicted one.

  14. A Novel Oscillating Rectenna for Wireless Microwave Power Transmission

    Science.gov (United States)

    McSpadden, J. O.; Dickinson, R. M.; Fan, L.; Chang, K.

    1998-01-01

    A new concept for solid state wireless microwave power transmission is presented. A 2.45 GHz rectenna element that was designed for over 85% RF to dc power conversion efficiency has been used to oscillate at 3.3 GHz with an approximate 1% dc to RF conversion efficiency.

  15. Power transmission and reception. An overview and perspective

    Science.gov (United States)

    Dietz, R. H.

    1980-07-01

    Systems definition and assessment of the microwave power transmission and reception (PTAR) system for the solar power satellite are surveyed. Five different options are discussed and the separate antenna concept using the linear beam klystron to convert from dc to RF energy is described in detail.

  16. Dynamic modeling of fluid power transmissions for wind turbines

    NARCIS (Netherlands)

    Diepeveen, N.F.B.; Jarquin Laguna, A.

    2011-01-01

    Fluid power transmission for wind turbines is quietly gaining more ground/interest. The principle of the various concepts presented so far is to convert aerodynamic torque of the rotor blades into a pressurized fluid flow by means of a positive displacement pump. At the other end of the fluid power

  17. Dynamic modeling of fluid power transmissions for wind turbines

    NARCIS (Netherlands)

    Diepeveen, N.F.B.; Jarquin Laguna, A.

    2011-01-01

    Fluid power transmission for wind turbines is quietly gaining more ground/interest. The principle of the various concepts presented so far is to convert aerodynamic torque of the rotor blades into a pressurized fluid flow by means of a positive displacement pump. At the other end of the fluid power

  18. Analysis of Interline Power Flow Controller (IPFC Location in Power Transmission Systems

    Directory of Open Access Journals (Sweden)

    Amir Kahyaei

    2011-07-01

    Full Text Available The Interline Power Flow Controller (IPFC is one of the latest generation Flexible AC Transmission Systems (FACTS controller used to control power flows of multiple transmission lines. The aim of this paper is investigation of the effect of location of IPFC on profile of voltage and real and reactive power flow in transmission lines in power system. This model is incorporated in Newton- Raphson (NR power flow algorithm to study the power flow control in transmission lines in which IPFC is placed. A program in MATLAB/SIMULINK has been written in order to extend conventional NR algorithm based on this model. Numerical results are carried out on a standard power system. The results without and with IPFC for various locations are compared in terms of voltages, active and reactive power flows to demonstrate the performance of the IPFC model.

  19. Sliding seal for mining machine power transmission

    Energy Technology Data Exchange (ETDEWEB)

    Levenstein, V.M.

    1993-07-06

    A generally tubular sealing mechanism is described for use in the power train of a mining machine to seal between an annular seal face on one of two spaced apart units in the power train and a sealing ring surface on the other of said units for sealed protection of a drive shaft connected between said two units, said sealing mechanism including a tubular seal carrier with a first end portion having a cylindrical sealing surface for being telescoped with said sealing ring surface, an annular seal element mountable on said cylindrical sealing surface for sealing engagement between said sealing ring surface and said cylindrical sealing surface, said carrier further having a second end portion with a radially extending face, a clamp connectable between said one unit and said carrier for urging said radially extending face toward said annular seal face, and a sealing member mountable in sealing engagement between said annular seal face and said radially extending face.

  20. Understanding Bulk Power Reliability: The Importance of Good Data and A Critical Review of Existing Sources

    Energy Technology Data Exchange (ETDEWEB)

    Fisher, Emily; Eto, Joseph H.; LaCommare, Kristina Hamachi

    2011-10-19

    Bulk power system reliability is of critical importance to the electricity sector. Complete and accurate information on events affecting the bulk power system is essential for assessing trends and efforts to maintain or improve reliability. Yet, current sources of this information were not designed with these uses in mind. They were designed, instead, to support real-time emergency notification to industry and government first-responders. This paper reviews information currently collected by both industry and government sources for this purpose and assesses factors that might affect their usefulness in supporting the academic literature that has relied upon them to draw conclusions about the reliability of the US electric power system.

  1. Transmission electron microscopy of bulk specimens over 10 µm in thickness

    Energy Technology Data Exchange (ETDEWEB)

    Sadamatsu, Sunao, E-mail: sadamatsu@mech.kagoshima-u.ac.jp [Department of Mechanical Engineering, Kagoshima University, Korimoto, Kagoshima 890-0065 (Japan); Tanaka, Masaki; Higashida, Kenji [Department of Materials Science and Engineering, Kyushu University, Nishi-ku, Fukuoka 819-0395 (Japan); Matsumura, Syo [Department of Applied Quantum Physics and Nuclear Engineering, Kyushu University, Nishi-ku, Fukuoka 819-0395 (Japan); Ultramicroscopy Research Center, Kyushu University, Nishi-ku, Fukuoka 819-0395 (Japan)

    2016-03-15

    We succeeded the observation of microstructures in bulk-sized specimens of over 10 µm in thickness by employing a technique that combines transmission electron microscopy (TEM) with energy-filtered imaging based on electron energy-loss spectroscopy (EELS). This method is unique in that it incorporates the inelastically scattered electrons into the imaging process. Using this technique, bright and sharp images of dislocations in crystalline silicon specimens as thick as 10 µm were obtained. A calibration curve to determine foil thickness of such a thick specimen was also derived. This method simply extends the observable thickness range in TEM. If combined with tilt series of observation over a significant range of angle, it will disclose three dimensional nanostructures in a µm-order block of a specimen, promoting our understanding of the controlling mechanisms behind various bulky material properties. - Highlights: • We developed a method which enables thick specimens to be observed using EF-TEM. • The effects of energy filter width and position on images were determined. • We suggested a method to determine the thickness of a thick film sample. • We achieved observation of microstructures in specimens with a thickness of 10 µm.

  2. Remote actuation by optical power transmission in fibres

    Science.gov (United States)

    Avis, S. E.; Byron, K. C.

    1987-04-01

    Some preliminary experiments on the remote actuation of a servo-valve are described in which the power transmission medium is an optical fibre. Using a semiconductor laser or a Nd:YAG laser as the power source and silicon cells as the opto-electrical transducer, switching of the servo-valve has been observed at power levels of a few milliwatts over 800 m of fibre.

  3. EHV/HV Underground Cable Systems for Power Transmission

    DEFF Research Database (Denmark)

    Bak, Claus Leth

    are to be found. One very good example of this is offshore wind power plants. The current transmission system is laid out in a traditional manner, which is based on the idea of not transporting power over longer distances as the power plants have been located near centres of consumption. It has merely played....... Many interesting research topics are still open, especially with regards to asset management tools....

  4. Allocation of Transmission Cost Using Power Flow Tracing Methods

    Directory of Open Access Journals (Sweden)

    CH Vishnu Vardhan Reddy

    2016-10-01

    Full Text Available In the open access restructured power system market, it is necessary to develop an appropriate pricing scheme that can provide the useful economic information to market participants, such as generation, transmission companies and customers. Though many methods have already been proposed, but accurately estimating and allocating the transmission cost in the transmission pricing scheme is still a challenging task. This work addresses the problem of allocating the cost of the transmission network to generators and demands. In this work four methods using DC Power flow and AC power flow have been attempted. They are MW-Mile Method, MVA-Mile Method, GGDF method and Bialek Tracing method.MVA-Mile method and Bialek Tracing method applies AC power flow and considers apparent power flows. The purpose of the present work is to allocate the cost pertaining to the transmission lines of the network to all the generators and demands. A load flow solution is run and, the proposed method determines how line flows depend on nodal currents. This result is then used to allocate network costs to generators and demands. The technique presented in this work is related to the allocation of the cost to GENCO‘s TRANSCO‘s and DISCO‘s. A technique for tracing the flow of electricity of lines among generators with GGDF and Bialek upstream looking algorithm is proposed. With these methods correct economic signals are generated for all players. All these methods are tested on IEEE 14 bus system

  5. An empirical analysis of freight rate and vessel price volatility transmission in global dry bulk shipping market

    Directory of Open Access Journals (Sweden)

    Lei Dai

    2015-10-01

    Full Text Available Global dry bulk shipping market is an important element of global economy and trade. Since newbuilding and secondhand vessels are often traded as assets and the freight rate is the key determinant of vessel price, it is important for shipping market participants to understand the market dynamics and price transmission mechanism over time to make suitable strategic decisions. To address this issue, a multi-variate GARCH model was applied in this paper to explore the volatility spillover effects across the vessel markets (including newbuilding and secondhand vessel markets and freight market. Specifically, the BEKK parameterization of the multi-variate GARCH model (BEKK GARCH was proposed to capture the volatility transmission effect from the freight market, newbuilding and secondhand vessel markets in the global dry bulk shipping industry. Empirical results reveal that significant volatility transmission effects exist in each market sector, i.e. capesize, panamax, handymax and handysize. Besides, the market volatility transmission mechanism varies among different vessel types. Moreover, some bilateral effects are found in the dry bulk shipping market, showing that lagged variances could affect the current variance in a counterpart market, regardless of the volatility transmission. A simple ratio is proposed to guide investors optimizing their portfolio allocations. The findings in this paper could provide unique insights for investors to understand the market and hedge their portfolios well.

  6. HVDC transmission power conversion applications in power systems

    CERN Document Server

    Kim, Chan-Ki; Jang, Gil-Soo; Lim, Seong-Joo; Lee, Seok-Jin

    2009-01-01

    HVDC is a critical solution to several major problems encountered when trying to maintain systemic links and quality in large-scale renewable energy environments. HDVC can resolve a number of issues, including voltage stability of AC power networks, reducing fault current, and optimal management of electric power, ensuring the technology will play an increasingly important role in the electric power industry. To address the pressing need for an up-to-date and comprehensive treatment of the subject, Kim, Sood, Jang, Lim and Lee have collaborated to produce this key text and reference.  Combin

  7. Flex-gear electrical power transmission

    Science.gov (United States)

    Vranish, John; Peritt, Jonathan

    1993-01-01

    This study was conducted to develop an alternative way of transferring electricity across a continuously rotating joint, with little wear and the potential for low electrical noise. The problems with wires, slip rings, electromagnetic couplings, and recently invented roll-rings are discussed. Flex-gears, an improvement of roll-rings, are described. An entire class of flexgear devices is developed. Finally, the preferred flex-gear device is optimized for maximum electrical contact and analyzed for average mechanical power loss and maximum stress. For a device diameter of six inches, the preferred device is predicted to have a total electrical contact area of 0.066 square inches. In the preferred device, a small amount of internal sliding produces a 0.003 inch-pound torque that resists the motion of the device.

  8. HVDC power transmission electrode siting and design

    Energy Technology Data Exchange (ETDEWEB)

    Holt, R.J. [NDT Engineering, Inc., Shrewbury, MA (United States); Dabkowski, J. [Electro-Sciences, Inc., Crystal Lake, IL (United States); Hauth, R.L. [New England Power Service Co., Westborough, MA (United States)

    1997-04-01

    This research strives to shed light on the feasibility and practicality of using deep earth electrodes to permit their use for extended periods without adverse consequences. This report begins with a review of the fundamentals associated with current conduction in earth, including the various techniques available for measuring the earth`s electrical properties. The sources of existing data are discussed and some specific data for selected regions of the U.S. and Canada are reviewed as examples. Electrode technology and design issues are reviewed and recent experience gained by New England Power and Hydro-Quebec is discussed. The issues associated with direct current flowing in underground pipelines (and other facilities) are described and the present-day mitigation measures are evaluated. Suggestions are made for further R&D in the coordination of cathodic protection systems, an area that has evolved as an empirical, trial- and-error art more than a science.

  9. Transmission grating stretcher for contrast enhancement of high power lasers.

    Science.gov (United States)

    Tang, Yunxin; Hooker, Chris; Chekhlov, Oleg; Hawkes, Steve; Collier, John; Rajeev, P P

    2014-12-01

    We propose, for the first time, a transmission grating stretcher for high power lasers and demonstrate its superiority over conventional, reflective gold grating stretchers in terms of pulse temporal quality. We show that, compared to a conventional stretcher with the same stretching factor, the transmission-grating based stretcher yields more than an order of magnitude improvement in the contrast pedestal. We have also quantitatively characterized the roughness of the grating surfaces and estimated its impact on the contrast pedestal.

  10. Addressing Impacts of Geomagnetic Disturbances on the North American Bulk Power System

    Science.gov (United States)

    Rollison, Eric; Moura, John; Lauby, Mark

    2011-08-01

    In a joint report issued in June 2010, the North American Electric Reliability Corporation (NERC) and the U.S. Department of Energy (DOE) identified geomagnetic disturbances as a high-impact, low-frequency (HILF) event risk to bulk power system reliability. The potential impact of geomagnetic disturbance events has gained renewed attention as recent studies have suggested that solar storms may be more severe and reach lower geographic latitudes than formerly expected and can affect bulk power system reliability. The most well known power system experience with geomagnetic disturbances in North America was the 13-14 March 1989 storm, which led to the collapse of the Hydro-Québec system in the early morning hours of 13 March 1989, lasting approximately 9 hours. NERC is actively addressing a range of HILF event risks to bulk power system reliability through the efforts of four of its task forces: Geomagnetic Disturbance, Spare Equipment Database, Cyber and Physical Attack, and Severe Impact Resilience. These task forces operate under the direction of three NERC committees: Planning, Operating, and Critical Infrastructure Protection. The NERC Geomagnetic Disturbance Task Force (GMDTF), which was established in September 2010, is charged with investigating the implications of geomagnetic disturbances to the reliability of bulk power systems and developing solutions to help mitigate these risks. The objective of these efforts is to develop models to better understand the nature and effects of coronal mass ejections (CMEs), the vulnerabilities of equipment, bulk power system design considerations, our ability to reduce the operational and real-time impacts of geomagnetic disturbances on the bulk power system, and restoration methods, as well as to inventory long-lead-time equipment. For more information on the current activities of the GMDTF, please visit: www.nerc.com/filez/gmdtf.html

  11. Power Transmission System Vulnerability Assessment Using Genetic Algorithm

    Directory of Open Access Journals (Sweden)

    E. Karimi

    2012-11-01

    Full Text Available Recent blackouts in power systems have shown the necessity of vulnerability assessment. Among all factors, transmission system components have a more important role. Power system vulnerability assessment could capture cascading outages which result in large blackouts and is an effective tool for power system engineers for defining power system bottlenecks and weak points. In this paper a new method based on fault chains concept is developed which uses new measures. Genetic algorithm with an effective structure is used for finding vulnerable branches in a practical power transmission system. Analytic hierarchy process is a technique used to determine the weighting factors in fitness function of genetic algorithm. Finally, the numerical results for Isfahan Regional Electric Company are presented which verifies the effectiveness and precision of the proposed method according to the practical expriments.

  12. Safety Message Power Transmission Control for Vehicular Ad hoc Networks

    CERN Document Server

    Samara, Ghassan; Al-Salihy, Wafaa A H

    2010-01-01

    Vehicular Ad hoc Networks (VANET) is one of the most challenging research area in the field of Mobile Ad Hoc Networks. In this research we proposed a dynamic power adjustment protocol that will be used for sending the periodical safety message. (Beacon)based on the analysis of the channel status depending on the channel congestion and the power used for transmission. The Beacon Power Control (BPC) protocol first sensed and examined the percentage of the channel congestion, the result obtained was used to adjust the transmission power for the safety message to reach the optimal power. This will lead to decrease the congestion in the channel and achieve good channel performance and beacon dissemination.

  13. Impact of Improved Solar Forecasts on Bulk Power System Operations in ISO-NE (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Brancucci Martinez-Anido, C.; Florita, A.; Hodge, B.M.

    2014-11-01

    The diurnal nature of solar power is made uncertain by variable cloud cover and the influence of atmospheric conditions on irradiance scattering processes. Its forecasting has become increasingly important to the unit commitment and dispatch process for efficient scheduling of generators in power system operations. This presentation is an overview of a study that examines the value of improved solar forecasts on Bulk Power System Operations.

  14. The electric power engineering handbook electric power generation, transmission, and distribution

    CERN Document Server

    Grigsby, Leonard L

    2012-01-01

    Featuring contributions from worldwide leaders in the field, the carefully crafted Electric Power Generation, Transmission, and Distribution, Third Edition (part of the five-volume set, The Electric Power Engineering Handbook) provides convenient access to detailed information on a diverse array of power engineering topics. Updates to nearly every chapter keep this book at the forefront of developments in modern power systems, reflecting international standards, practices, and technologies. Topics covered include: * Electric Power Generation: Nonconventional Methods * Electric Power Generation

  15. Power transmission project: progress through fiscal year 1976

    Energy Technology Data Exchange (ETDEWEB)

    1976-12-27

    One year's work on the development of helium-cooled niobium-tin superconducting cables for 550 kV or higher power transmission lines is summarized. Information is included on: conductor research involving the fabrication, materials testing, and performance testing of Nb/sub 3/Sn tapes; design, materials testing and performance testing of cable insulation; mechanical and cryogenic engineering of transmission line components and of test facilities; and accumulated data on the design and testing of existing helium-cooled transmission lines in the Pennsylvania, study, Philadelphia Electric study, and LILCO (Long Island) study. (LCL)

  16. High Voltage AC underground cable systems for power transmission

    DEFF Research Database (Denmark)

    Bak, Claus Leth; Silva, Filipe Miguel Faria da

    2016-01-01

    This paper is a second of two presenting a review of research results in underground cable transmission obtained by the Department of Energy Technology, Aalborg University ET/AAU and Danish TSO Energinet.dk within the last six years. The main core of the results are obtained by PhD students...... researching electrical engineering topics related to using underground cables for power transmission at EHV level and including the 420 kV level. The research topics were laid down by ET/AAU and Energinet.dk in the DANPAC (DANish Power systems with Ac Cables) research project. The main topics are discussed...

  17. Power Transmission of UHF Passive Embedded RFID in Tires

    OpenAIRE

    Shengbo Hu; Bing Si; Heng Shu; Jinrong Mo

    2014-01-01

    UHF passive RFID tags embedded in tires have a deep impact on tire life cycle management and tire monitoring. In this work, we present the power transmission of UHF passive embedded RFID in tires. In UHF passive embedded RFID systems in tires, the bidirectional radio link between reader and tags goes through air and tires. The total path loss contains reflection loss at tire-air boundaries and attenuation loss in the tires. The power transmission is based on the permittivity of tires and tire...

  18. Bulk damage and absorption in fused silica due to high-power laser applications

    Science.gov (United States)

    Nürnberg, F.; Kühn, B.; Langner, A.; Altwein, M.; Schötz, G.; Takke, R.; Thomas, S.; Vydra, J.

    2015-11-01

    Laser fusion projects are heading for IR optics with high broadband transmission, high shock and temperature resistance, long laser durability, and best purity. For this application, fused silica is an excellent choice. The energy density threshold on IR laser optics is mainly influenced by the purity and homogeneity of the fused silica. The absorption behavior regarding the hydroxyl content was studied for various synthetic fused silica grades. The main absorption influenced by OH vibrational excitation leads to different IR attenuations for OH-rich and low-OH fused silica. Industrial laser systems aim for the maximum energy extraction possible. Heraeus Quarzglas developed an Yb-doped fused silica fiber to support this growing market. But the performance of laser welding and cutting systems is fundamentally limited by beam quality and stability of focus. Since absorption in the optical components of optical systems has a detrimental effect on the laser focus shift, the beam energy loss and the resulting heating has to be minimized both in the bulk materials and at the coated surfaces. In collaboration with a laser research institute, an optical finisher and end users, photo thermal absorption measurements on coated samples of different fused silica grades were performed to investigate the influence of basic material properties on the absorption level. High purity, synthetic fused silica is as well the material of choice for optical components designed for DUV applications (wavelength range 160 nm - 260 nm). For higher light intensities, e.g. provided by Excimer lasers, UV photons may generate defect centers that effect the optical properties during usage, resulting in an aging of the optical components (UV radiation damage). Powerful Excimer lasers require optical materials that can withstand photon energy close to the band gap and the high intensity of the short pulse length. The UV transmission loss is restricted to the DUV wavelength range below 300 nm and

  19. Microwave beam power transmission at an arbitrary range

    Science.gov (United States)

    Pinero, L. R.; Christian, J. L., Jr.; Acosta, R. J.

    1992-01-01

    The power transfer efficiency between two circular apertures at an arbitrary range is obtained numerically. The apertures can have generally different sizes and arbitrary taper illuminations. The effects of distance and taper illumination on the transmission efficiency are investigated for equal size apertures. The result shows that microwave beam power is more effective at close ranges, namely distances less than 2D(exp 2)/lambda. Also shown was the power transfer efficiency increase with taper illumination for close range distances. A computer program was developed for calculating the power transfer efficiency at an arbitrary range.

  20. Applications of high-temperature superconductors in power technology[8470 High-current and high-voltage technology: power systems; power transmission lines and cables;

    Energy Technology Data Exchange (ETDEWEB)

    Hull, John R [Energy Technology Division, Argonne National Laboratory, Argonne, IL 60439 (United States)

    2003-11-01

    Since the discovery of the first high-temperature superconductors (HTSs) in the late 1980s, many materials and families of materials have been discovered that exhibit superconductivity at temperatures well above 20 K. Of these, several families of HTSs have been developed for use in electrical power applications. Demonstration of devices such as motors, generators, transmission lines, transformers, fault-current limiters, and flywheels in which HTSs and bulk HTSs have been used has proceeded to ever larger scales. First-generation wire, made from bismuth-based copper oxides, was used in many demonstrations. The rapid development of second-generation wire, made by depositing thin films of yttrium-based copper oxide on metallic substrates, is expected to further accelerate commercial applications. Bulk HTSs, in which large single-grain crystals are used as basic magnetic components, have also been developed and have potential for electrical power applications.

  1. EHV/HV Underground Cable Systems for Power Transmission

    DEFF Research Database (Denmark)

    Bak, Claus Leth

    Power transmission is facing its largest challenges ever with regards to handling a transition from today’s fossil‐based power production into renewable sources of generation. We can no longer place power plants close to centres of consumption; they must be located where the natural resources...... the role of interconnecting these generation/load centres, ensuring fair reliability and redundancy of supply. Nowadays, the power transmission system must be able to handle the various sources of renewable generation in a flexible electricity market. This has the consequence that the original layout...... cables is given, and secondly, the modelling approach and validation of this is discussed. Thirdly, making up the main core of the work presented, dynamics of underground cable systems are discussed and important cases to study are highlighted, and next, protection and fault location are discussed...

  2. Enhanced Wireless Power Transmission Using Strong Paramagnetic Response.

    Science.gov (United States)

    Ahn, Dukju; Kiani, Mehdi; Ghovanloo, Maysam

    2014-03-01

    A method of quasi-static magnetic resonant coupling has been presented for improving the power transmission efficiency (PTE) in near-field wireless power transmission, which improves upon the state of the art. The traditional source resonator on the transmitter side is equipped with an additional resonator with a resonance frequency that is tuned substantially higher than the magnetic field excitation frequency. This additional resonator enhances the magnetic dipole moment and the effective permeability of the power transmitter, owing to a phenomenon known as the strong paramagnetic response. Both theoretical calculations and experimental results show increased PTE due to amplification of the effective permeability. In measurements, the PTE was improved from 57.8% to 64.2% at the nominal distance of 15 cm when the effective permeability was 2.6. The power delivered to load was also improved significantly, with the same 10 V excitation voltage, from 0.38 to 5.26 W.

  3. Portable wireless power transmission system for video capsule endoscopy.

    Science.gov (United States)

    Zhiwei, Jia; Guozheng, Yan; Bingquan, Zhu

    2014-10-01

    Wireless power transmission is considered a practical way of overcoming the power shortage of wireless capsule endoscopy (VCE). However, most patients cannot tolerate the long hours of lying in a fixed transmitting coil during diagnosis. To develop a portable wireless power transmission system for VCE, a compact transmitting coil and a portable inverter circuit driven by rechargeable batteries are proposed. The couple coils, optimized considering the stability and safety conditions, are 28 turns of transmitting coil and six strands of receiving coil. The driven circuit is designed according to the portable principle. Experiments show that the integrated system could continuously supply power to a dual-head VCE for more than 8 h at a frame rate of 30 frames per second with resolution of 320 × 240. The portable VCE exhibits potential for clinical applications, but requires further improvement and tests.

  4. Beamed microwave power transmission and its application to space

    Science.gov (United States)

    Brown, William C.; Eves, E. E.

    1992-01-01

    The general principles and special components of beamed microwave power transmission systems are outlined and their application to the space program are discussed. The beamed system is defined as starting with a dc source of power at the transmitting end, converting it to a microwave beam for transmission through space, and ending with the dc power output at the receiving end. An experimentally measured and certified dc-to-dc efficiency of 54 percent has been achieved, using this definition. The application discussed is that of a LEO to GEO transportation system that depends upon vehicles propelled by electric thrusters whose power is supplied by a microwave beam originating at the earth's surface. The advantages of the all-electronic system over a chemically propelled system are enumerated. The principles of space propulsion, particularly as they relate to electric propulsion, are outlined. Key components of the system and environmental considerations are discussed.

  5. TRANSMISSION OF DATA USING POWER LINE CARRIER COMMUNICATION SYSTEM

    Directory of Open Access Journals (Sweden)

    Jovita Serrao

    2012-11-01

    Full Text Available This paper serves as a general and technical reference to transmission of data using a power line carrier communication system which is a preferred choice over Wireless or other Home Networking technologies due to the ease of installation, availability of AC outlets, higher throughput, low cost, reliability and security. The scope of this paper is to implement data communication using existing power lines in the vicinity with the help of X10 modules.

  6. Influence of increment thickness on light transmission, degree of conversion and micro hardness of bulk fill composites.

    Science.gov (United States)

    Garoushi, Sufyan; Vallittu, Pekka; Shinya, Akikazu; Lassila, Lippo

    2016-09-01

    This study evaluated characteristics of light transmission, degree of monomer conversion and surface microhardness of bulk fill, conventional and fiber-reinforced resin based composites (RBCs) through different incremental thicknesses of resin composite. Working hypotheses was that there are differences in transmission of blue light through RBCs of different kinds and that the thickness of the increments influence the degree of monomer conversion of RBCs. Six bulk fill, three conventional nanohybrid, one short fiber reinforced and one flowable RBCs were evaluated. For each material, four different incremental thicknesses (1, 2, 3 and 4 mm) were considered (n = 5). The specimens were prepared in cylindrical Teflon molds that are open at the top and the bottom sides and cured for 40 s by applying the curing unit. After curing process, the specimens were ground with a silicon carbide paper with a grit size of 1200 and 4000, and then stored dry at 37 °C for 24 h. Light transmission, degree of monomer conversion, surface microhardness were measured and data were analyzed using ANOVA (p = 0.05). There were differences in light transmission of resin composites of various types and brands. Low-viscous bulk fill and short fiber-reinforced RBCs presented higher light transmission compared to resin composites of higher viscosity. Reduced light transmission and lower surface microhardness and DC % at bottom side of the specimen suggests that more attention needs to be paid to ensure proper curing of the resin composite in deep cavities.

  7. An Examination of AC/HVDC Power Circuits for Interconnecting Bulk Wind Generation with the Electric Grid

    Directory of Open Access Journals (Sweden)

    Daniel Ludois

    2010-06-01

    Full Text Available The application of high voltage dc (HVDC transmission for integrating large scale and/or off-shore wind generation systems with the electric grid is attractive in comparison to extra high voltage (EHV ac transmission due to a variety of reasons. While the technology of classical current sourced converters (CSC using thyristors is well established for realization of large HVDC systems, the technology of voltage sourced converters (VSC is emerging to be an alternative approach, particularly suitable for multi-terminal interconnections. More recently, a more modular scheme that may be termed ‘bridge of bridge’ converters (BoBC has been introduced to realize HVDC systems. While all these three approaches are functionally capable of realizing HVDC systems, the converter power circuit design trade-offs between these alternatives are not readily apparent. This paper presents an examination of these topologies from the point of view of power semiconductor requirements, reactive component requirements, operating losses, fault tolerance, multi-terminal operation, modularity, complexity, etc. Detailed analytical models will be used along with a benchmark application to develop a comparative evaluation of the alternatives that maybe used by wind energy/bulk transmission developers for performing engineering trade-off studies.

  8. An examination of AC/HVDC power circuits for interconnecting bulk wind generation with the electric grid

    Energy Technology Data Exchange (ETDEWEB)

    Ludois, D.; Venkataramanan, G. [Department of Electrical and Computer Engineering, University of Wisconsin-Madison 1415 Engineering Dr. Madison WI 53706 (United States)

    2010-06-15

    The application of high voltage DC (HVDC) transmission for integrating large scale and/or off-shore wind generation systems with the electric grid is attractive in comparison to extra high voltage (EHV) AC transmission due to a variety of reasons. While the technology of classical current sourced converters (CSC) using thyristors is well established for realization of large HVDC systems, the technology of voltage sourced converters (VSC) is emerging to be an alternative approach, particularly suitable for multi-terminal interconnections. More recently, a more modular scheme that may be termed 'bridge of bridge' converters (BoBC) has been introduced to realize HVDC systems. While all these three approaches are functionally capable of realizing HVDC systems, the converter power circuit design trade-offs between these alternatives are not readily apparent. This paper presents an examination of these topologies from the point of view of power semiconductor requirements, reactive component requirements, operating losses, fault tolerance, multi-terminal operation, modularity, complexity, etc. Detailed analytical models will be used along with a benchmark application to develop a comparative evaluation of the alternatives that may be used by wind energy/bulk transmission developers for performing engineering trade-off studies. (author)

  9. Case study on the US superconducting power transmission program

    Energy Technology Data Exchange (ETDEWEB)

    Hammel, E.F.

    1996-02-01

    After the 1911 discovery of superconductivity (the abrupt loss of electrical resistance in certain materials at very low temperatures), attempts were made to make practical use of this phenomenon. Initially these attempts failed, but in the early 1960s (after 50 years of research) they succeeded. By then, the projected growth in the production and consumption of electrical energy required much higher capacity power transmission capabilities than were available or likely to become available from incremental improvements in existing transmission technology. Since superconductors were capable in principle of transmitting huge amounts of power, research programs to develop and demonstrate superconducting transmission lines were initiated in the US and abroad. The history of the US program, including the participants, their objectives, funding and progress made, is outlined. Since the R&D program was terminated before the technology was completely demonstrated, the reasons for and consequences of this action are discussed in a final section.

  10. Optical fiber transmission of high power excimer laser radiation.

    Science.gov (United States)

    Pini, R; Salimbeni, R; Vannini, M

    1987-10-01

    An experimental investigation of optical fiber transmission of high power excimer laser radiation is presented. Different types of commercially available UV fiber have been tested, measuring energy handling capabilities and transmission losses of short samples at the XeCl (308-nm) and KrF (249-nm) wavelengths by using a standard excimer laser. A power density dependent damage process has been observed over 1 GW/cm(2). Fiber losses due to different radii of curvature are also reported. Experimental results have been examined to evaluate the effectiveness of excimer laser transmission through optical fibers for such medical uses as laser angioplasty, including also a comparison between the use of KrF or XeCl emission lines for this purpose. Finally, optimum excimer laser characteristics to increase the energy coupling in fibers are discussed.

  11. High Voltage AC underground cable systems for power transmission

    DEFF Research Database (Denmark)

    Bak, Claus Leth; Silva, Filipe Miguel Faria da

    2016-01-01

    This paper is a first of two presenting a review of research results in underground cable transmission obtained by the Department of Energy Technology, Aalborg University ET/AAU and Danish TSO Energinet.dk within the last 6 years. The main core of the results are obtained by PhD students research......This paper is a first of two presenting a review of research results in underground cable transmission obtained by the Department of Energy Technology, Aalborg University ET/AAU and Danish TSO Energinet.dk within the last 6 years. The main core of the results are obtained by PhD students...... researching electrical engineering topics related to using underground cables for power transmission at EHV level and including the 420 kV level. The research topics were laid down by ET/AAU and Energinet.dk in the DANPAC (DANish Power systems with AC Cables) research project. The main topics are discussed...

  12. Optimal Transmission Power in a Nonlinear VLC System

    Institute of Scientific and Technical Information of China (English)

    ZHAO Shuang; CAI Sunzeng; KANG Kai; QIAN Hua

    2016-01-01

    In a visible light communication (VLC) system, the light emitting diode (LED) is nonlinear for large signals, which limits the trans⁃mission power or equivalently the coverage of the VLC system. When the input signal amplitude is large, the nonlinear distortion creates harmonic and intermodulation distortion, which degrades the transmission error vector magnitude (EVM). To evaluate the impact of nonlinearity on system performance, the signal to noise and distortion ratio (SNDR) is applied, defined as the linear sig⁃nal power over the thermal noise plus the front end nonlinear distortion. At a given noise level, the optimal system performance can be achieved by maximizing the SNDR, which results in high transmission rate or long transmission range for the VLC system. In this paper, we provide theoretical analysis on the optimization of SNDR with a nonlinear Hammerstein model of LED. Simula⁃tion results and lab experiments validate the theoretical analysis.

  13. Transmission Reinforcements in the Central American Regional Power System

    Energy Technology Data Exchange (ETDEWEB)

    Elizondo, Marcelo A.; Vallem, Mallikarjuna R.; Samaan, Nader A.; Makarov, Yuri V.; Vyakaranam, Bharat; Nguyen, Tony B.; Munoz, Christian; Herrera, Ricardo; Midence, Diego; Shpitsberg, Anna

    2016-07-25

    The Central American regional interconnected power system (SER) connects the countries members of the Central American regional electricity market (MER): Guatemala, El Salvador, Honduras, Nicaragua, Costa Rica, and Panama. The SER was a result of a long term regional effort, and was initially conceived to transfer 300 MW between countries. However, the current transfer limits between countries range from 70 MW to 300 MW. Regional entities, like CRIE (Regional Commission of Electrical Interconnection), EOR (Central American Regional System Operator), and CDMER (Board of Directors of the Central American Market) are working on coordinating the national transmission expansion plans with regional transmission planning efforts. This paper presents experience in Central America region to recommend transmission reinforcements to achieve 300 MW transfer capacity between any pair of member countries of the Central American regional electricity market (MER). This paper also provides a methodology for technical analysis and for coordination among the regional and national entities. This methodology is unique for transmission systems of these characteristics.

  14. Load flow computations in hybrid transmission - distributed power systems

    NARCIS (Netherlands)

    Wobbes, E.D.; Lahaye, D.J.P.

    2013-01-01

    We interconnect transmission and distribution power systems and perform load flow computations in the hybrid network. In the largest example we managed to build, fifty copies of a distribution network consisting of fifteen nodes is connected to the UCTE study model, resulting in a system consisting

  15. Lightning location system supervising Swedish power transmission network

    Science.gov (United States)

    Melin, Stefan A.

    1991-01-01

    For electric utilities, the ability to prevent or minimize lightning damage on personnel and power systems is of great importance. Therefore, the Swedish State Power Board, has been using data since 1983 from a nationwide lightning location system (LLS) for accurately locating lightning ground strikes. Lightning data is distributed and presented on color graphic displays at regional power network control centers as well as at the national power system control center for optimal data use. The main objectives for use of LLS data are: supervising the power system for optimal and safe use of the transmission and generating capacity during periods of thunderstorms; warning service to maintenance and service crews at power line and substations to end operations hazardous when lightning; rapid positioning of emergency crews to locate network damage at areas of detected lightning; and post analysis of power outages and transmission faults in relation to lightning, using archived lightning data for determination of appropriate design and insulation levels of equipment. Staff have found LLS data useful and economically justified since the availability of power system has increased as well as level of personnel safety.

  16. Design of Low-Power CMOS OTA Using Bulk-Drive Technique

    OpenAIRE

    2015-01-01

    This paper presents the design of low power CMOS- OTA (operational transconductance amplifier) using bulk drive (BD) technique with broad band. This technique is used for design of low power circuits with broad band for high frequency users, for example communication systems, mobile communication and communication forming of medical electronics. OTA is the base of amplifier .It is a fundamental building part of analog systems. Recently analog designer has been paid to low voltage (LV),low pow...

  17. 75 FR 61478 - Mandatory Reliability Standards for the Bulk Power System; Notice Allowing Post-Technical...

    Science.gov (United States)

    2010-10-05

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Mandatory Reliability Standards for the Bulk Power System; Notice Allowing Post-Technical Conference Comments September 24, 2010. On September 23, 2010, the Federal...

  18. High-Power Microwave Transmission and Mode Conversion Program

    Energy Technology Data Exchange (ETDEWEB)

    Vernon, Ronald J. [Univ. of Wisconsin, Madison, WI (United States)

    2015-08-14

    This is a final technical report for a long term project to develop improved designs and design tools for the microwave hardware and components associated with the DOE Plasma Fusion Program. We have developed basic theory, software, fabrication techniques, and low-power measurement techniques for the design of microwave hardware associated gyrotrons, microwave mode converters and high-power microwave transmission lines. Specifically, in this report we discuss our work on designing quasi-optical mode converters for single and multiple frequencies, a new method for the analysis of perturbed-wall waveguide mode converters, perturbed-wall launcher design for TE0n mode gyrotrons, quasi-optical traveling-wave resonator design for high-power testing of microwave components, and possible improvements to the HSX microwave transmission line.

  19. Impact of Distributed Wind on Bulk Power System Operations in ISO-NE (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Brancucci Martinez-Anido, C.; Hodge, B. M.; Palchak, D.; Miettinen, J.

    2014-11-01

    The work presented in the paper corresponding to this presentation aims to study the impact of a range of penetration levels of distributed wind on the operation of the electric power system at the transmission level. This presentation is an overview of a case study on the power system in Independent System Operator New England. It is analyzed using PLEXOS, a commercial power system simulation tool

  20. Wide-Area Emergency Control in Power Transmission

    DEFF Research Database (Denmark)

    Pedersen, Andreas Søndergaard

    This thesis concerns the development of new emergency control algorithms for electric power transmission systems. Diminishing global resources and climate concerns forces operators to change production away from fossil fuels and towards distributed renewable energy sources. Along with the change...... on production side measures must be taken on the demand side to maintain power balance. Due to these changes, the operating point of the power system will be less predictable. Traditionally, emergency controls are designed off-line by extensive simulations. The future power system is expected to fluctuate more......, thus making the behaviour less predictable, suggesting the need for new intelligent wide-area emergency control algorithms. The fluctuating nature of the future power system calls for new methods of calculating remedial actions that are able to adapt to changing conditions. As part of this thesis...

  1. Impedance matching wireless power transmission system for biomedical devices.

    Science.gov (United States)

    Lum, Kin Yun; Lindén, Maria; Tan, Tian Swee

    2015-01-01

    For medical application, the efficiency and transmission distance of the wireless power transfer (WPT) are always the main concern. Research has been showing that the impedance matching is one of the critical factors for dealing with the problem. However, there is not much work performed taking both the source and load sides into consideration. Both sides matching is crucial in achieving an optimum overall performance, and the present work proposes a circuit model analysis for design and implementation. The proposed technique was validated against experiment and software simulation. Result was showing an improvement in transmission distance up to 6 times, and efficiency at this transmission distance had been improved up to 7 times as compared to the impedance mismatch system. The system had demonstrated a near-constant transfer efficiency for an operating range of 2cm-12cm.

  2. A Q-Modulation Technique for Efficient Inductive Power Transmission.

    Science.gov (United States)

    Kiani, Mehdi; Lee, Byunghun; Yeon, Pyungwoo; Ghovanloo, Maysam

    2015-12-01

    A fully-integrated power management ASIC for efficient inductive power transmission has been presented capable of automatic load transformation using a method, called Q-modulation. Q-modulation is an adaptive scheme that offers load matching against a wide range of loading (RL ) and coupling distance (d23 ) variations in inductive links to maintain high power transfer efficiency (PTE). It is suitable for inductive powering implantable microelectronic devices (IMDs), recharging mobile electronics, and electric vehicles. In Q-modulation, the zero-crossings of the induced current in the receiver (Rx) LC-tank are detected and a low-loss switch chops the Rx LC-tank for part of the power carrier cycle to form a high-Q LC-tank and store the maximum energy, which is then transferred to RL by opening the switch. By adjusting the duty cycle (D), the loaded-Q of the Rx LC-tank can be dynamically modulated to compensate for variations in RL . A Q-modulation power management (QMPM) prototype chip was fabricated in a 0.35-μm standard CMOS process, occupying 4.8 mm(2). In a 1.45 W wireless power transfer setup, using a class-E power amplifier (PA) operating at 2 MHz, the QMPM successfully increased the inductive link PTE and the overall power efficiency by 98.5% and 120.7% at d23 = 8 cm, respectively, by compensating for 150 Ω variation in RL at D = 45%.

  3. Transmission rights and market power on electric power networks. 2. Physical rights

    Energy Technology Data Exchange (ETDEWEB)

    Joskow, Paul; Tirole, Jean

    1999-02-01

    This discussion paper examines physical transmission rights where the capacity of each potentially congested interface is defined and the rights to use the congested interfaces are created and allocated in some way for suppliers and consumers. The way in which the allocation of physical rights affects competition or increases the buyers or sellers market power in the power generation market when a transmission interface is congested, and how rights markets with different microstructures allocate physical rights and determine rights prices are explored. An electricity market with physical transmission rights in the absence of capacity release rules, and physical transmission rights and market power are addressed. Loop flows, and capacity release rules are discussed. (UK)

  4. Power Improvement of Transmission Line Using High Voltage Direct Current (Hvdc Transmission System

    Directory of Open Access Journals (Sweden)

    Lasisi, H

    2016-08-01

    Full Text Available The use of long EHV (Extremely High Voltage ac lines for the transmission of electrical energy increases the line reactance and susceptance which limits the thermal loadings on the line in order to keep sufficient margin against transient instability. With the scheme proposed in this paper, it is possible to load the lines very close to their limit with zero reactance and susceptance. The conductors are allowed to carry usual ac along with dc superimposed on it. The added dc power flow does not cause any transient instability. The scheme comprises a twelve-pulse bridge rectifier, dc-links, pulse width modulated (PSW-voltage sourced inverter (VSI and converter transformers. The master current controller is used to implement the scheme which senses ac current and regulates the dc current orders for converters online such that conductor current never exceeds its thermal limit. This paper gives the feasibility of converting a double circuit ac line into composite ac–dc power transmission line given the advantage of stability improvement, damping oscillations, voltage stabilization and reactive power compensation for ac weak buses. Simulation and experimental studies using MATLAB (Matrix Laboratory are carried out for the coordinated control as well as independent control of ac and dc power transmissions.

  5. Wireless power transmission applied the mutual coupling between coils

    Science.gov (United States)

    Furuta, Kenta; Baba, Ryouichi; Shun, Endo; Nunokawa, Kazuki; Takahashi, Wataru; Maruyama, Tamami

    2017-07-01

    Recently, the studies of wireless power transfer (WPT) to electric vehicles in motion on the snow-piled road have been reported. In WPT by magnetic field resonance method, transmission coefficient S21, which is one of the scattering parameters, from transmission coil to received coil are degraded because of misalignment of transmitting and receiving coil, the distance between these coils, and the effects of the ice and snow. This paper adopts parasitic coil as a solution to improve the reception power in which the parasitic coil is inserted between transmitting and receiving coils. Analysis and experimental results show that parasitic coil could improve the value of S21 by 15 dB using mutual coupling. LED could be light by this solution when the distance between transmitting and receiving coils are 150 mm.

  6. Transmission needs across a fully renewable European power system

    CERN Document Server

    Rodriguez, Rolando A; Andresen, Gorm B; Heide, Dominik; Greiner, Martin

    2013-01-01

    The residual load and excess power generation of 27 European countries with a 100% penetration of variable renewable energy sources are explored in order to quantify the benefit of power transmission between countries. Estimates are based on extensive weather data, which allows for modelling of hourly mismatches between the demand and renewable generation from wind and solar photovoltaics. For separated countries, balancing is required to cover around 24% of the total annual energy consumption. This number can be reduced down to 15% once all countries are networked together with uncon- strained interconnectors. The reduction represents the maximum possible benefit of transmission for the countries. The total Net Transfer Capacity of the unconstrained interconnectors is roughly twelve times larger than current values. However, constrained interconnector capacities six times larger than the current values are found to provide 97% of the maximum possible benefit of cooperation. This motivates a detailed investig...

  7. Cryogenic System for a High Temperature Superconducting Power Transmission Cable

    Energy Technology Data Exchange (ETDEWEB)

    Demko, J.A.; Gouge, M.J.; Hughey, R.L.; Lue, J.W.; Martin, R.; Sinha, U.; Stovall, J.P.

    1999-07-12

    High-temperature superconducting (HTS) cable systems for power transmission are under development that will use pressurized liquid nitrogen to provide cooling of the cable and termination hardware. Southwire Company and Oak Ridge National Laboratory have been operating a prototype HTS cable system that contains many of the typical components needed for a commercial power transmission application. It is being used to conduct research in the development of components and systems for eventual commercial deployment. The cryogenic system was built by Air Products and Chemicals, Allentown, Pennsylvania, and can circulate up to 0.35 kg/s of liquid nitrogen at temperatures as low as 67 K at pressures of 1 to 10 bars. Sufficient cooling is provided for testing a 5-m-long HTS transmission cable system that includes the terminations required for room temperature electrical connections. Testing of the 5-m HTS transmission cable has been conducted at the design ac conditions of 1250 A and 7.5 kV line to ground. This paper contains a description of the essential features of the HTS cable cryogenic system and performance results obtained during operation of the system. The salient features of the operation that are important in large commercial HTS cable applications will be discussed.

  8. American lifelines alliance efforts to improve electric power transmission reliability

    Science.gov (United States)

    Nishenko, S.P.; Savage, W.U.; Honegger, D.G.; McLane, T.R.; ,

    2002-01-01

    A study was performed on American Lifelines Alliance (ALA) efforts to improve electric power transmission reliability. ALA is a public-private partnership project, with the goal of reducing risks to lifelines from natural hazards and human threat events. The mechanism used by ALA for developing national guidelines for lifeline systems is dependent upon using existing Standards Developing Organizations (SDO) accredited by the American National Standards Institute (ANSI) as means to achieve national consensus.

  9. A GIS-based Power Transmission Management Information System

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    <正>Based on analyzing the shortcomings of electric power enterprise in traditional operation pattern,this paper combines components GIS with the application of management information system,and uses the structure which unifies three layers C/S and B/S.Also,proposed using the GPS intellectualization patrol.This may be useful to guarantees the transmission line’s operation to be safe and stable.

  10. Power transmission line operating modes calculation with controllable phase shifters

    Science.gov (United States)

    Astashev, M. G.; Novikov, M. A.; Panfilov, D. I.; Rashitov, P. A.; Remizevich, T. V.; Fedorova, M. I.

    2016-12-01

    The article contains the analysis of the influence of the phase shifter (PS) on the energy processes in the power transmission line in terms of the two-unit model of the electric network. The approach to synthesis of the models regulated by the phase shifter providing for both calculation of the steady operation modes of the electric networks with the phase shifters and research of the electromagnetic processes and designing of the device itself is offered.

  11. Analysis of DC Power Transmission Using High Tc Superconducting Cables

    Institute of Scientific and Technical Information of China (English)

    Jun-Lian Zhang; Jian-Xun Jin

    2008-01-01

    A conceptual superconducting DC cable model is designed and its magnetic fields distribution is analyzed with Ansoft/Maxwell soft. A DC Power transmission system is also studied by using the Matlab/Simulink. With the DC Line and AC Ground Fault, the system losses analysis is introduced.The analysis results mainly include the magnetic fields distribution of the HTS cable model with Ansoft/Maxwell, the system loss, the DC Line and AC Ground Fault with Matlab/Simulation.

  12. Solar/Electromagnetic Energy Harvesting and Wireless Power Transmission

    OpenAIRE

    2014-01-01

    This paper presents a review of existing works and solutions in the field of solar/electromagnetic energy harvesting and wireless power transmission. More specifically, the paper covers: solar/electromagnetic harvesters where solar antenna structures are used to obtain a compact implementation, direct current (dc) combining circuits necessary to combine the outputs of the solar and the electromagnetic harvesters, and efficient solar-to-electromagnetic (EM) converters that can be used to synth...

  13. WIRELESS POWER TRANSMISSION USING INDUCTIVE RESONANCE COUPLING IN MOBILE CHARGERING

    OpenAIRE

    Valarmathi Krishnan*, N. Suyambu, Vijayaragavan. M, Rajalakshmi. S

    2016-01-01

    The objective of this technical report is to provide electrical energy to remote objects without wires.   Wireless energy transfer also known as wireless energy transmission is the process that takes place in any system where electromagnetic energy is transmitted from a power source to an electrical load, without interconnecting wires. The principle of wireless electricity works on the principle of using coupled resonant objects for the transfer of electricity to objects without the use of an...

  14. Design of Low-Power CMOS OTA Using Bulk-Drive Technique

    Directory of Open Access Journals (Sweden)

    Maryam Ghadiri Modarres

    2015-10-01

    Full Text Available This paper presents the design of low power CMOS- OTA (operational transconductance amplifier using bulk drive (BD technique with broad band. This technique is used for design of low power circuits with broad band for high frequency users, for example communication systems, mobile communication and communication forming of medical electronics. OTA is the base of amplifier .It is a fundamental building part of analog systems. Recently analog designer has been paid to low voltage (LV,low power (LP integrated circuits. Many techniques are used for the design of LV LP circuits, the bulk driven offers principle this designs. This paper suggests a bulk driven OTA in standard CMOS processes and supply voltage 0.8 volt DC. It used of improved wilson current mirror. The simulation results have been carried out by the HSPICE simulator in 180 nm CMOS technology. The open loop gain is enhanced to 17.4dB at unity gain band with (UGB of 26.1 MHZ with sufficient output swing. Power consumption of the OTA is in range of few hundreds of nanowatts (6%.

  15. Power and signal transmission for mobile teleoperated systems

    Energy Technology Data Exchange (ETDEWEB)

    Morris, A.C. Jr.; Hamel, W.R.

    1985-01-01

    Appropriate means must be furnished for supplying power and for sending controlling commands to mobile teleoperated systems. Because a sizable number of possibilities are available for such applications, methods used in designing both the power and communications systems built into mobile vehicles that serve in radiological emergencies must be carefully selected. This paper describes a number of umbilical, on-board, and wireless systems used in tranmitting power that are available for mobile teleoperator services. The pros and cons of selecting appropriate methods from a list of possible communication systems (wired, fiber optic, and radio frequency) are also examined. Moreover, hybrid systems combining wireless power transmissions with command-information signals are also possible.

  16. Low-Power Design of Ethernet Data Transmission

    Institute of Scientific and Technical Information of China (English)

    Wen-Ming Pan; Qin Zhang; Jia-Feng Chen; Hao-Yuan Wang; Jia-Chong Kan

    2014-01-01

    For the reliability and power consumption issues of Ethernet data transmission based on the field programmable gate array (FPGA), a low-power consumption design method is proposed, which is suitable for FPGA implementation. To reduce the dynamic power consumption of integrated circuit (IC) design, the proposed method adopts the dynamic control of the clock frequency. For most of the time, when the port is in the idle state or lower-rate state, users can reduce or even turn off the reading clock frequency and reduce the clock flip frequency in order to reduce the dynamic power consumption. When the receiving rate is high, the reading clock frequency will be improved timely to ensure that no data will lost. Simulated and verified by Modelsim, the proposed method can dynamically control the clock frequency, including the dynamic switching of high-speed and low-speed clock flip rates, or stop of the clock flip.

  17. Power transmission coefficients for multi-step index optical fibres.

    Science.gov (United States)

    Aldabaldetreku, Gotzon; Zubia, Joseba; Durana, Gaizka; Arrue, Jon

    2006-02-20

    The aim of the present paper is to provide a single analytical expression of the power transmission coefficient for leaky rays in multi-step index (MSI) fibres. This expression is valid for all tunnelling and refracting rays and allows us to evaluate numerically the power attenuation along an MSI fibre of an arbitrary number of layers. We validate our analysis by comparing the results obtained for limit cases of MSI fibres with those corresponding to step-index (SI) and graded-index (GI) fibres. We also make a similar comparison between this theoretical expression and the use of the WKB solutions of the scalar wave equation.

  18. Power Delivery in Multiterminal VSC-HVDC Transmission System for Offshore Wind Power Applications

    DEFF Research Database (Denmark)

    Silva, Rodrigo Da; Teodorescu, Remus; Rodriguez, Pedro

    2010-01-01

    This paper deals with one of the challenges in the field of offshore wind power systems: power transmission among the wind farms and the land when there is more than one AC grid to be considered. This case is known in the literature as multiterminal connection. The proposed studies are going to p...

  19. Power Transmission of UHF Passive Embedded RFID in Tires

    Directory of Open Access Journals (Sweden)

    Shengbo Hu

    2014-01-01

    Full Text Available UHF passive RFID tags embedded in tires have a deep impact on tire life cycle management and tire monitoring. In this work, we present the power transmission of UHF passive embedded RFID in tires. In UHF passive embedded RFID systems in tires, the bidirectional radio link between reader and tags goes through air and tires. The total path loss contains reflection loss at tire-air boundaries and attenuation loss in the tires. The power transmission is based on the permittivity of tires and tire-air boundary conditions. We give an OCP method for measuring the permittivity of tires. By analyzing the radio link for UHF passive RFID, we establish a model of wave propagation of UHF embedded RFID in tires and make numerical analyses. Numerical analyses show that the error of the OCP methods for measuring the permittivity of tires is small, the parallel polarization and normal incidence of wave are chosen for improving the performance of the UHF embedded RFID in tires, and distance is chosen to keep power transmission function from locating valley.

  20. 18 CFR 2.22 - Pricing policy for transmission services provided under the Federal Power Act.

    Science.gov (United States)

    2010-04-01

    ... transmission services provided under the Federal Power Act. 2.22 Section 2.22 Conservation of Power and Water... for transmission services provided under the Federal Power Act. (a) The Commission has adopted a Policy Statement on its pricing policy for transmission services provided under the Federal Power...

  1. 76 FR 7187 - Priorities for Addressing Risks to the Reliability of the Bulk-Power System; Reliability...

    Science.gov (United States)

    2011-02-09

    ... Energy Regulatory Commission Priorities for Addressing Risks to the Reliability of the Bulk- Power System; Reliability Technical Conference Panel February 2, 2011. As announced in the Notice of Technical Conference..., to discuss policy issues related to reliability of the Bulk-Power System, including priorities...

  2. 76 FR 2369 - Priorities for Addressing Risks to the Reliability of the Bulk-Power System; Notice of Technical...

    Science.gov (United States)

    2011-01-13

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Priorities for Addressing Risks to the Reliability of the Bulk- Power System... related to reliability of the Bulk-Power System, including priorities for addressing risks to...

  3. Harmonics in Offshore Wind Power Plants Employing Power Electronic Devices in the Transmission System

    DEFF Research Database (Denmark)

    Glasdam, Jakob Bærholm

    of wind power. The onshore as well as offshore wind power plants (OWPPs) therefore have to meet the same stringent requirement as the conventional power plants. This can be accommodated by employment of flexible alternating current transmission system (FACTS) devices, such as the static compensator...... gives rise to a number of challenges to the wind power industry with regard to construction, installation as well as transmission of the generated energy. The STATCOM and the voltage-sourced converter high-voltage direct current (VSC-HVDC) are attractive solutions for grid connection of remotely located...... OWPPs. The new system configuration requires in-depth knowledge of all relevant technical aspects, including e.g. the involved control systems performance and robustness for all possible operating conditions. The transmission system operator might impose new control requirements when the VSC...

  4. Active Power Flow Optimization of Industrial Power Supply with Regard to the Transmission Line Conductor Heating

    Directory of Open Access Journals (Sweden)

    Leyzgold D.Yu.

    2015-04-01

    Full Text Available This article studies the problem of the transmission line conductor heating effect on the active power flows optimization in the local segment of industrial power supply. The purpose is to determine the optimal generation rating of the distributed power sources, in which the power flow values will correspond to the minimum active power losses in the power supply. The timeliness is the need to define the most appropriate rated power values of distributed sources which will be connected to current industrial power supply. Basing on the model of active power flow optimization, authors formulate the description of the nonlinear transportation problem considering the active power losses depending on the transmission line conductor heating. Authors proposed a new approach to the heating model parameters definition based on allowable current loads and nominal parameters of conductors as part of the optimization problem. Analysis of study results showed that, despite the relatively small active power losses reduction to the tune 0,45% due to accounting of the conductors heating effect for the present configuration of power supply, there are significant fluctuations in the required generation rating in nodes of the network to 9,32% within seasonal changes in the outer air temperature. This fact should be taken into account when selecting the optimum power of distributed generation systems, as exemplified by an arbitrary network configuration.

  5. A Distributed Autonomous Approach for Bulk Power System Restoration by Means of Multi-Agent System

    Science.gov (United States)

    Nagata, Takeshi; Tahara, Yoshiki; Kunisa, Daisuke; Fujita, Hideki

    In recent years, the electric utility industry worldwide has been facing pressure to be deregulated. Along with it, risk of blackout in large area will also increase. Actually, it is still vivid in our memory that the northeastern US and southern Canada suffered the worst blackout in history. Consequently, a method to find the optimal solution rapidly is needed all the more. In this paper, we propose a new multi-agent method for a bulk power system restoration. In order to demonstrate the capability of the proposed multi-agent system, it has been applied to a model bulk power system, which consists of three local areas including twelve generating units and twelve loads, and three remote areas with twelve loads. A large number of simulations are carried out on this model network with changing conditions. The simulation results show that the proposed multi-agent approach is effective and promising.

  6. Investigation of a stripline transmission line structure for gyromagnetic nonlinear transmission line high power microwave sources.

    Science.gov (United States)

    Reale, D V; Parson, J M; Neuber, A A; Dickens, J C; Mankowski, J J

    2016-03-01

    A stripline gyromagnetic nonlinear transmission line (NLTL) was constructed out of yttrium iron garnet ferrite and tested at charge voltages of 35 kV-55 kV with bias fields ranging from 10 kA/m to 20 kA/m. Typically, high power gyromagnetic NLTLs are constructed in a coaxial geometry. While this approach has many advantages, including a uniform transverse electromagnetic (TEM) mode, simple interconnection between components, and the ability to use oil or pressurized gas as an insulator, the coaxial implementation suffers from complexity of construction, especially when using a solid insulator. By moving to a simpler transmission line geometry, NLTLs can be constructed more easily and arrayed on a single substrate. This work represents a first step in exploring the suitability of various transmission line structures, such as microstrips and coplanar waveguides. The resulting high power microwave (HPM) source operates in ultra high frequency (UHF) band with an average bandwidth of 40.1% and peak rf power from 2 MW to 12.7 MW.

  7. A Model for Prediction of Propulsion Power and Emissions – Tankers and Bulk Carriers

    DEFF Research Database (Denmark)

    Lützen, Marie; Kristensen, Hans Otto Holmegaard

    To get an idea of the reduction in propulsion power and associated emissions by varying the speed and other ship design main parameters, a generic model for parameter studies of tankers and bulk carriers has been developed. With only a few input parameters of which the maximum deadweight capacity...... is the primary input a proposal for the main dimensions is made. Based on these dimensions and other ship particulars which are determined by the program the necessary installed propulsion power can be calculated. By adjusting the vessel design, i.e. the suggested main dimensions, and varying the speed...

  8. A portable wireless power transmission system for video capsule endoscopes.

    Science.gov (United States)

    Shi, Yu; Yan, Guozheng; Zhu, Bingquan; Liu, Gang

    2015-01-01

    Wireless power transmission (WPT) technology can solve the energy shortage problem of the video capsule endoscope (VCE) powered by button batteries, but the fixed platform limited its clinical application. This paper presents a portable WPT system for VCE. Besides portability, power transfer efficiency and stability are considered as the main indexes of optimization design of the system, which consists of the transmitting coil structure, portable control box, operating frequency, magnetic core and winding of receiving coil. Upon the above principles, the correlation parameters are measured, compared and chosen. Finally, through experiments on the platform, the methods are tested and evaluated. In the gastrointestinal tract of small pig, the VCE is supplied with sufficient energy by the WPT system, and the energy conversion efficiency is 2.8%. The video obtained is clear with a resolution of 320×240 and a frame rate of 30 frames per second. The experiments verify the feasibility of design scheme, and further improvement direction is discussed.

  9. Dynamic security risk assessment and optimization of power transmission system

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The paper presents a practical dynamic security region (PDSR) based dynamic security risk assessment and optimization model for power transmission system. The cost of comprehensive security control and the influence of uncertainties of power injections are considered in the model of dynamic security risk assessment. The transient stability constraints and uncertainties of power injections can be considered easily by PDSR in form of hyper-box. A method to define and classify contingency set is presented, and a risk control optimization model is given which takes total dynamic insecurity risk as the objective function for a dominant con-tingency set. An optimal solution of dynamic insecurity risk is obtained by opti-mizing preventive and emergency control cost and contingency set decomposition. The effectiveness of this model has been proved by test results on the New Eng-land 10-genarator 39-bus system.

  10. Normalized power transmission between ABP and ICP in TBI.

    Science.gov (United States)

    Shahsavari, S; Hallen, T; McKelvey, T; Ritzen, C; Rydenhag, B

    2009-01-01

    A new approach to study the pulse transmission between the cerebrovascular bed and the intracranial space is presented. In the proposed approach, the normalized power transmission between ABP and ICP has got the main attention rather than the actual power transmission. Evaluating the gain of the proposed transfer function at any single frequency can reveal how the percentage of contribution of that specific frequency component has been changed through the cerebrospinal system. The gain of the new transfer function at the fundamental cardiac frequency was utilized to evaluate the state of the brain in three TBI patients. Results were assessed using the reference evaluations achieved by a novel CT scan-based scoring scheme. In all three study cases, the gain of the transfer function showed a good capability to follow the trend of the CT scores and describe the brain state. Comparing the new transfer function with the traditional one and also the index of compensatory reserve, the proposed transfer function was found more informative about the state of the brain in the patients under study.

  11. Simulation of Reactive Power Imbalances in the Transmission Power Grid Threatened by the Problem of Voltage Instability

    OpenAIRE

    Robert Lis; Mirosław Łabuzek

    2013-01-01

    The reactive power balance in the transmission power grid depends on the reactive power produced by the power stations and the value generated by the capacitive power lines and static compensators. Reactive transmission losses become greater than shunt capacitive generation at the turning-point of voltage stability. Then lowering bus voltages drive EPS into voltage collapse point. The paper presents the balance of reactive power depending on the power demand growth, which is then used to esti...

  12. 76 FR 4103 - Central Minnesota Municipal Power Agency, Midwest Municipal Transmission Group; Notice of Filing

    Science.gov (United States)

    2011-01-24

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Central Minnesota Municipal Power Agency, Midwest Municipal Transmission... Municipal Power Agency and Midwest Municipal Transmission Group submitted an amendment to a petition for...

  13. Multi-Objective Transmission Network Planning with Consideration of Power Grid Vulnerability and Wind Power Accommodation

    Directory of Open Access Journals (Sweden)

    Chun-guang Tian

    2013-12-01

    Full Text Available This paper proposes an efficient approach for transmission network expansion planning. Three indicators are proposed to evaluate the planning, which is the power grid vulnerability, wind power accommodation and operation cost. Vulnerability is evaluated based on the complex network theory, and wind power accommodation analysis is performed by the rate of abandoned wind power. The optimization of transmission network expansion planning is translated into constraints multi-objective optimization problem. A novel QS-MOWE algorithm based on the improvement quick sort and NSGA-II algorithm has been proposed. The method can be used effectively to study the effect of increasing wind power integration and vulnerability with high wind generation uncertainties. The model and algorithms are applied to calculate a case of 6 units. The results show that the proposed modeling method can provide a useful guidance for planning problems.

  14. Modeling and Power Flow Analysis for Herringbone Gears Power Dual-Branching Transmission System

    Science.gov (United States)

    Yang, Xiaofang; Zhu, Yanxiang; Fang, Zongde; Gu, Jiangong

    Based on power dual-branching transmission system of herringbone gears, the mechanical structural model was established. This study represented the simplified algorithm to obtain its power flow situations through formulating the deformation compatibility condition for the linear relationship between the torque and transverse deformation of tooth surface and the torque equilibrium condition. Besides, the effects on the power flow of system were calculated under all kinds of the installation error and processing error of gear pairs. Finally, the power flow situations of dual branches were solved via Programming. A numerical example that illustrated the developed theory was provided. The research results can be applied to analyze the actual application of herringbone gears power split-path transmission system.

  15. Optimal Operation of Energy Storage in Power Transmission and Distribution

    Science.gov (United States)

    Akhavan Hejazi, Seyed Hossein

    In this thesis, we investigate optimal operation of energy storage units in power transmission and distribution grids. At transmission level, we investigate the problem where an investor-owned independently-operated energy storage system seeks to offer energy and ancillary services in the day-ahead and real-time markets. We specifically consider the case where a significant portion of the power generated in the grid is from renewable energy resources and there exists significant uncertainty in system operation. In this regard, we formulate a stochastic programming framework to choose optimal energy and reserve bids for the storage units that takes into account the fluctuating nature of the market prices due to the randomness in the renewable power generation availability. At distribution level, we develop a comprehensive data set to model various stochastic factors on power distribution networks, with focus on networks that have high penetration of electric vehicle charging load and distributed renewable generation. Furthermore, we develop a data-driven stochastic model for energy storage operation at distribution level, where the distribution of nodal voltage and line power flow are modelled as stochastic functions of the energy storage unit's charge and discharge schedules. In particular, we develop new closed-form stochastic models for such key operational parameters in the system. Our approach is analytical and allows formulating tractable optimization problems. Yet, it does not involve any restricting assumption on the distribution of random parameters, hence, it results in accurate modeling of uncertainties. By considering the specific characteristics of random variables, such as their statistical dependencies and often irregularly-shaped probability distributions, we propose a non-parametric chance-constrained optimization approach to operate and plan energy storage units in power distribution girds. In the proposed stochastic optimization, we consider

  16. Critical Assessment of the Foundations of Power Transmission and Distribution Reliability Metrics and Standards.

    Science.gov (United States)

    Nateghi, Roshanak; Guikema, Seth D; Wu, Yue Grace; Bruss, C Bayan

    2016-01-01

    The U.S. federal government regulates the reliability of bulk power systems, while the reliability of power distribution systems is regulated at a state level. In this article, we review the history of regulating electric service reliability and study the existing reliability metrics, indices, and standards for power transmission and distribution networks. We assess the foundations of the reliability standards and metrics, discuss how they are applied to outages caused by large exogenous disturbances such as natural disasters, and investigate whether the standards adequately internalize the impacts of these events. Our reflections shed light on how existing standards conceptualize reliability, question the basis for treating large-scale hazard-induced outages differently from normal daily outages, and discuss whether this conceptualization maps well onto customer expectations. We show that the risk indices for transmission systems used in regulating power system reliability do not adequately capture the risks that transmission systems are prone to, particularly when it comes to low-probability high-impact events. We also point out several shortcomings associated with the way in which regulators require utilities to calculate and report distribution system reliability indices. We offer several recommendations for improving the conceptualization of reliability metrics and standards. We conclude that while the approaches taken in reliability standards have made considerable advances in enhancing the reliability of power systems and may be logical from a utility perspective during normal operation, existing standards do not provide a sufficient incentive structure for the utilities to adequately ensure high levels of reliability for end-users, particularly during large-scale events.

  17. Magnetic shielding structure optimization design for wireless power transmission coil

    Science.gov (United States)

    Dai, Zhongyu; Wang, Junhua; Long, Mengjiao; Huang, Hong; Sun, Mingui

    2017-09-01

    In order to improve the performance of the wireless power transmission (WPT) system, a novel design scheme with magnetic shielding structure on the WPT coil is presented in this paper. This new type of shielding structure has great advantages on magnetic flux leakage reduction and magnetic field concentration. On the basis of theoretical calculation of coil magnetic flux linkage and characteristic analysis as well as practical application feasibility consideration, a complete magnetic shielding structure was designed and the whole design procedure was represented in detail. The simulation results show that the coil with the designed shielding structure has the maximum energy transmission efficiency. Compared with the traditional shielding structure, the weight of the new design is significantly decreased by about 41%. Finally, according to the designed shielding structure, the corresponding experiment platform is built to verify the correctness and superiority of the proposed scheme.

  18. Impact of Distributed Wind on Bulk Power System Operations in ISO-NE: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Brancucci Martinez-Anido, C.; Hodge, B. M.; Palchak, D.; Miettinen, J.

    2014-09-01

    The work presented in this paper aims to study the impact of a range of penetration levels of distributed wind on the operation of the electric power system at the transmission level. This paper presents a case study on the power system in Independent System Operator New England. It is analyzed using PLEXOS, a commercial power system simulation tool. The results show that increasing the integration of distributed wind reduces total variable electricity generation costs, coal- and gas-fired electricity generation, electricity imports, and CO2 emissions, and increases wind curtailment. The variability and uncertainty of wind power also increases the start-up and shutdown costs and ramping of most conventional power plants.

  19. Impact of Distributed Wind on Bulk Power System Operations in ISO-NE

    Energy Technology Data Exchange (ETDEWEB)

    Brancucci Martinez-Anido, Carlo; Hodge, Bri-Mathias; Palchak, David; Miettinen, Jari

    2014-11-13

    The work presented in this paper aims to study the impact of a range of penetration levels of distributed wind on the operation of the electric power system at the transmission level. This paper presents a case study on the power system in Independent System Operator New England. It is analyzed using PLEXOS, a commercial power system simulation tool. The results show that increasing the integration of distributed wind reduces total variable electricity generation costs, coal- and gas-fired electricity generation, electricity imports, and CO2 emissions, and increases wind curtailment. The variability and uncertainty of wind power also increases the start-up and shutdown costs and ramping of most conventional power plants.

  20. 78 FR 4873 - Electrical Protective Equipment Standard and the Electric Power Generation, Transmission, and...

    Science.gov (United States)

    2013-01-23

    ... on Electrical Protective Equipment (29 CFR 1910.137) and Electric Power Generation, Transmission, and... Equipment Standard (29 CFR 1910.137) and the Electric Power Generation, Transmission, and Distribution... the equipment-testing requirements of the Standard. Electric Power Generation, Transmission,...

  1. 50 CFR 29.21-8 - Electric power transmission line rights-of-way.

    Science.gov (United States)

    2010-10-01

    ... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false Electric power transmission line rights-of... General Regulations § 29.21-8 Electric power transmission line rights-of-way. By accepting a right-of-way for a power transmission line, the applicant thereby agrees and consents to comply with and be...

  2. 77 FR 26275 - Bonneville Power Administration; Montana-to-Washington Transmission System Upgrade Project EIS

    Science.gov (United States)

    2012-05-03

    ... Bonneville Power Administration; Montana-to-Washington Transmission System Upgrade Project EIS AGENCY...``''sts for long-term transmission service. During the NOS process, utilities and power generators (including wind generators and power marketers) requested the use of BPA's transmission system to...

  3. Study of novel concepts of power transmission gears

    Science.gov (United States)

    Rivin, Eugene I.

    1991-01-01

    Two concepts in power transmission gear design are proposed which provide a potential for large noise reduction and for improving weight to payload ratio due to use of advanced fiber reinforced and ceramic materials. These concepts are briefly discussed. Since both concepts use ultrathin layered rubber-metal laminates for accommodating limited travel displacements, properties of the laminates, such as their compressive strength, compressive and shear moduli were studied. Extensive testing and computational analysis were performed on the first concept gears (laminate coated conformal gears). Design and testing of the second conceptual design (composite gear with separation of sliding and rolling motions) are specifically described.

  4. Recent Accomplishments in Laser-Photovoltaic Wireless Power Transmission

    Science.gov (United States)

    Fikes, John C.; Henley, Mark W.; Mankins, John C.; Howell, Joe T.; Fork, Richard L.; Cole, Spencer T.; Skinner, Mark

    2003-01-01

    Wireless power transmission can be accomplished over long distances using laser power sources and photovoltaic receivers. Recent research at AMOS has improved our understanding of the use of this technology for practical applications. Research by NASA, Boeing, the University of Alabama-Huntsville, the University of Colorado, Harvey Mudd College, and the Naval Postgraduate School has tested various commercial lasers and photovoltaic receiver configurations. Lasers used in testing have included gaseous argon and krypton, solid-state diodes, and fiber optic sources, at wavelengths ranging from the visible to the near infra-red. A variety of Silicon and Gallium Arsenide photovoltaic have been tested with these sources. Safe operating procedures have been established, and initial tests have been conducted in the open air at AMOS facilities. This research is progressing toward longer distance ground demonstrations of the technology and practical near-term space demonstrations.

  5. Precision power generator system for a single-wire electric power transmission

    OpenAIRE

    2014-01-01

    The article contains an example of the construction of precision oscillator operating frequency based of the chip AD 9832 company Аnalog Devices that implements the method of direct digital synthesis (DDS) and high-frequency power circuit for a system of single-wire electric power transmission which supports functions digital installations of the operating frequency.The use of DDS frequency synthesizer allows you to build a precision oscillator with a unique digital certainty: the signal gene...

  6. Risk measures for power failures in transmission systems

    Science.gov (United States)

    Cassidy, Alex; Feinstein, Zachary; Nehorai, Arye

    2016-11-01

    We present a novel framework for evaluating the risk of failures in power transmission systems. We use the concept of systemic risk measures from the financial mathematics literature with models of power system failures in order to quantify the risk of the entire power system for design and comparative purposes. The proposed risk measures provide the collection of capacity vectors for the components in the system that lead to acceptable outcomes. Keys to the formulation of our measures of risk are two elements: a model of system behavior that provides the (distribution of) outcomes based on component capacities and an acceptability criterion that determines whether a (random) outcome is acceptable from an aggregated point of view. We examine the effects of altering the line capacities on energy not served under a variety of networks, flow manipulation methods, load shedding schemes, and load profiles using Monte Carlo simulations. Our results provide a quantitative comparison of the performance of these schemes, measured by the required line capacity. These results provide more complete descriptions of the risks of power failures than the previous, one-dimensional metrics.

  7. Unified active and reactive power modulation of HVDC transmission systems

    Science.gov (United States)

    Grund, C. E.; Pohl, R. V.

    1981-11-01

    The power modulation of a high voltage direct current (HVDC) system for stabilization of an ac/dc network was investigated. It was found that simultaneous modulation of both dc current and voltage was more effective than just current modulation by itself, since the dc voltage modulation could be used to minimize the reactive power changes resulting from a change of the dc current. This helps stabilize the ac busbar voltages at the converters, which reduces undesirable load flow changes to voltage dependent ac loads, thus improving the effectiveness of the dc power modulation. This unified modulation control concept was evaluated by means of digital computer studies as well as a special purpose HVDC simulator. Several combined ac/dc power transmission systems were synthesized for testing of different modulation controller concepts. An optimum controller design incorporating a linear quadratic control algorithm with full state feedback was first studied. This provided a basis for comparison of suboptimal controller designs utilizing reduced state feedback and a Kalman filter state reconstruction technique.

  8. Risk measures for power failures in transmission systems.

    Science.gov (United States)

    Cassidy, Alex; Feinstein, Zachary; Nehorai, Arye

    2016-11-01

    We present a novel framework for evaluating the risk of failures in power transmission systems. We use the concept of systemic risk measures from the financial mathematics literature with models of power system failures in order to quantify the risk of the entire power system for design and comparative purposes. The proposed risk measures provide the collection of capacity vectors for the components in the system that lead to acceptable outcomes. Keys to the formulation of our measures of risk are two elements: a model of system behavior that provides the (distribution of) outcomes based on component capacities and an acceptability criterion that determines whether a (random) outcome is acceptable from an aggregated point of view. We examine the effects of altering the line capacities on energy not served under a variety of networks, flow manipulation methods, load shedding schemes, and load profiles using Monte Carlo simulations. Our results provide a quantitative comparison of the performance of these schemes, measured by the required line capacity. These results provide more complete descriptions of the risks of power failures than the previous, one-dimensional metrics.

  9. Performance evaluation of power transmission coils for powering endoscopic wireless capsules.

    Science.gov (United States)

    Basar, Md Rubel; Ahmad, Mohd Yazed; Cho, Jongman; Ibrahim, Fatimah

    2015-01-01

    This paper presents an analysis of H-field generated by a simple solenoid, pair of solenoids, pair of double-layer solenoids, segmented-solenoid, and Helmholtz power transmission coils (PTCs) to power an endoscopic wireless capsule (WC). The H-fields were computed using finite element analysis based on partial differential equations. Three parameters were considered in the analysis: i) the maximum level of H-field (Hmax) to which the patient's body would be exposed, ii) the minimum level of H-field (Hmin) effective for power transmission, and iii) uniformity of H-field. We validated our analysis by comparing the computed data with data measured from a fabricated Helmholtz PTC. This analysis disclosed that at the same excitation power, all the PTCs are able to transfer same amount of minimum usable power since they generated almost equal value of Hmin. The level of electromagnetic exposure and power transfer stability across all the PTCs would vary significantly which is mainly due to the different level of Hmax and H-field uniformity. The segmented solenoid PTC would cause the lowest exposure and this PTC can transfer the maximum amount of power. The Helmholtz PTC would be able to transfer the most stable power with a moderate level of exposure.

  10. Melt-processed bulk superconductors: Fabrication and characterization for power and space applications

    Science.gov (United States)

    Hojaji, Hamid; Barkatt, Aaron; Hu, Shouxiang; Thorpe, Arthur N.; Ware, Matthew F.; Davis, David; Alterescu, Sidney

    1991-01-01

    Melt-process bulk superconducting materials based on variations on the base YBa2Cu3O(x) were produced in a variety of shapes and forms. Very high values of both zero-field and high-field magnetization were observed. These are useful for levitation and power applications. Magnetic measurements show that the effects of field direction and intensity, temperature and time are consistent with an aligned grain structure with multiple pinning sites and with models of thermally activated flux motion.

  11. Space Solar Power Technology Demonstration for Lunar Polar Applications: Laser-Photovoltaic Wireless Power Transmission

    Science.gov (United States)

    Henley, M. W.; Fikes, J. C.; Howell, J.; Mankins, J. C.; Howell, Joe T. (Technical Monitor)

    2002-01-01

    Space Solar Power technology offers unique benefits for near-term NASA space science missions, which can mature this technology for other future applications. "Laser-Photo-Voltaic Wireless Power Transmission" (Laser-PV WPT) is a technology that uses a laser to beam power to a photovoltaic receiver, which converts the laser's light into electricity. Future Laser-PV WPT systems may beam power from Earth to satellites or large Space Solar Power satellites may beam power to Earth, perhaps supplementing terrestrial solar photo-voltaic receivers. In a near-term scientific mission to the moon, Laser-PV WPT can enable robotic operations in permanently shadowed lunar polar craters, which may contain ice. Ground-based technology demonstrations are proceeding, to mature the technology for this initial application, in the moon's polar regions.

  12. ZF cPower – Hydrostatic-Mechanical Powersplit Transmission for Construction and Forest Machinery

    OpenAIRE

    Legner, Jürgen; Rebholz, Wolfgang; Morrison, Robert

    2016-01-01

    Until recently, hydrostatic-mechanical power split CVT drivelines have not found a place in construction machinery. The majority of these vehicles still use hydrodynamic powershift transmissions, full-hydrostatic transmissions or mechanical direct-shift transmissions. Hydrostatic drive lines are widely used in construction machinery possessing lower engine power. The upper power range is dominated by hydrodynamic powershift transmissions. Decisions made by vehicle manufacturers about which dr...

  13. Power transmission cable development for the Space Station Freedom electrical power system

    Science.gov (United States)

    Schmitz, Gregory V.; Biess, John J.

    1989-01-01

    Power transmission cable is presently being evaluated under a NASA Lewis Research Center advanced development contract for application in the Space Station Freedom (SSF) electrical power system (EPS). Evaluation testing has been performed by TRW and NASA Lewis Research Center. The results of this development contract are presented. The primary cable design goals are to provide (1) a low characteristic inductance to minimize line voltage drop at 20 kHz, (2) electromagnetic compatibility control of the 20-kHz ac power current, (3) a physical configuration that minimizes ac resistance and (4) release of trapped air for corona-free operation.

  14. Use of FACTS for enhanced flexibility and efficiency in power transmission and distribution grids

    Energy Technology Data Exchange (ETDEWEB)

    Grunbaum, Rolf; Wahlberg, Conny; Sannino, Ambra

    2010-09-15

    The paper shows how the use of FACTS increases flexibility in power transmission and distribution, improving capacity of transmission corridors to integrate renewable power production. Examples included are 69 kV directly connected SVCs for grid stabilization in conjunction with a high degree of wind power penetration; series compensation to evacuate power from the largest wind power installation in USA; SVC to increase the reliability and reduce congestion over a heavily loaded power corridor; thyristor controlled series compensation to increase the dynamic stability and power transmission capability of a power inter-connector. Finally, some applications of Dynamic energy storage are highlighted.

  15. Self-powered system with wireless data transmission.

    Science.gov (United States)

    Hu, Youfan; Zhang, Yan; Xu, Chen; Lin, Long; Snyder, Robert L; Wang, Zhong Lin

    2011-06-08

    We demonstrate the first self-powered system driven by a nanogenerator (NG) that works wirelessly and independently for long-distance data transmission. The NG was made of a free cantilever beam that consisted of a five-layer structure: a flexible polymer substrate, ZnO nanowire textured films on its top and bottom surfaces, and electrodes on the surfaces. When it was strained to 0.12% at a strain rate of 3.56% S(-1), the measured output voltage reached 10 V, and the output current exceeded 0.6 μA (corresponding power density 10 mW/cm(3)). A system was built up by integrating a NG, rectification circuit, capacitor for energy storage, sensor, and RF data transmitter. Wireless signals sent out by the system were detected by a commercial radio at a distance of 5-10 m. This study proves the feasibility of using ZnO nanowire NGs for building self-powered systems, and its potential application in wireless biosensing, environmental/infrastructure monitoring, sensor networks, personal electronics, and even national security.

  16. Initial assessment: electromagnetic compatibility aspects of proposed SPS Microwave Power Transmission System (MPTS) operations

    Energy Technology Data Exchange (ETDEWEB)

    1978-02-01

    An analysis of major concerns with regard to the effects on radio and electronic systems by the proposed Microwave Power Transmission System for transmitting power from a satellite solar power station to earth is presented. (LCL)

  17. Development of Live-working Robot for Power Transmission Lines

    Science.gov (United States)

    Yan, Yu; Liu, Xiaqing; Ren, Chengxian; Li, Jinliang; Li, Hui

    2017-07-01

    Dream-I, the first reconfigurable live-working robot for power transmission lines successfully developed in China, has the functions of autonomous walking on lines and accurately positioning. This paper firstly described operation task and object of the robot; then designed a general platform, an insulator replacement end and a drainage plate bolt fastening end of the robot, presented a control system of the robot, and performed simulation analysis on operation plan of the robot; and finally completed electrical field withstand voltage tests in a high voltage hall as well as online test and trial on actual lines. Experimental results show that by replacing ends of manipulators, the robot can fulfill operation tasks of live replacement of suspension insulators and live drainage plate bolt fastening.

  18. Pulsed Power for a Dynamic Transmission Electron Microscope

    Energy Technology Data Exchange (ETDEWEB)

    dehope, w j; browning, n; campbell, g; cook, e; king, w; lagrange, t; reed, b; stuart, b; Shuttlesworth, R; Pyke, B

    2009-06-25

    Lawrence Livermore National Laboratory (LLNL) has converted a commercial 200kV transmission electron microscope (TEM) into an ultrafast, nanoscale diagnostic tool for material science studies. The resulting Dynamic Transmission Electron Microscope (DTEM) has provided a unique tool for the study of material phase transitions, reaction front analyses, and other studies in the fields of chemistry, materials science, and biology. The TEM's thermionic electron emission source was replaced with a fast photocathode and a laser beam path was provided for ultraviolet surface illumination. The resulting photoelectron beam gives downstream images of 2 and 20 ns exposure times at 100 and 10 nm spatial resolution. A separate laser, used as a pump pulse, is used to heat, ignite, or shock samples while the photocathode electron pulses, carefully time-synchronized with the pump, function as probe in fast transient studies. The device functions in both imaging and diffraction modes. A laser upgrade is underway to make arbitrary cathode pulse trains of variable pulse width of 10-1000 ns. Along with a fast e-beam deflection scheme, a 'movie mode' capability will be added to this unique diagnostic tool. This talk will review conventional electron microscopy and its limitations, discuss the development and capabilities of DTEM, in particularly addressing the prime and pulsed power considerations in the design and fabrication of the DTEM, and conclude with the presentation of a deflector and solid-state pulser design for Movie-Mode DTEM.

  19. Power-Voltage Characteristics of Power System with the Long Transmission Line

    Directory of Open Access Journals (Sweden)

    Prechanon Kumkratug

    2012-01-01

    Full Text Available Problem statement: Power- Voltage curve provides very important information for voltage stability analysis. The exact long transmission line model consists of the resistance and the reactance. The resistance causes in the active line loss. It is not easy task to achieve the power-voltage curve characteristics of power system with the exact long line model. Approach: This study applies the concept of the Newton-Raphson method to iteratively solve the nonlinear power flow equations. The Power-Voltage (P-V curve characteristic of the system without line loss and with line loss are plotted and compared on various cases. Results: It is found from the study that the resistance of the line obviously provides the negative effects on the voltage stability. The line loss causes in the decrement of the critical point. In addition, it is found that the leading power factor can increase the critical point of P-V curve. Conclusion: The exact long line model should be considered for voltage stability analysis of the system with the long transmission line.

  20. High output power reluctance electric motors with bulk high-temperature superconductor elements

    Science.gov (United States)

    Kovalev, L. K.; Ilushin, K. V.; Penkin, V. T.; Kovalev, K. L.; Larionoff, A. E.; M-A Koneev, S.; Modestov, K. A.; Larionoff, S. A.; Poltavets, V. N.; Akimov, I. I.; Alexandrov, V. V.; Gawalek, W.; Oswald, B.; Krabbes, G.

    2002-05-01

    We present new types of electric machines with the rotors containing bulk high-temperature superconductor (HTS) - YBCO and Bi-Ag - elements. We discuss different schematics of hysteresis, reluctance, 'trapped field' and composed synchronous HTS machines. The two-dimensional mathematical models describing the processes in such types of HTS machines were developed on the basis of the theoretical analysis of the electrodynamic and hysteresis processes in the single-domain and polycrystal YBCO ceramic samples and plate shape Bi-Ag elements. We give the test results of the series of hysteresis, reluctance, 'trapped field' and composed with permanent magnets HTS motors with an output power rating of 0.1-18 kW and current frequencies 50 Hz and 400 Hz. These results show that in the media of liquid nitrogen the specific output power per one unit weight of the HTS motor is four to seven times better than for conventional electric machines. A comparison of the theoretical and experimental characteristics of the developed HTS motors show that they are in good agreement. We discuss the test results for a liquid nitrogen cryogenic pump system with a hysteresis 500 W HTS motor. We describe several designs of new HTS motors operating in the media of liquid nitrogen with an output power 125 kW (and more) and a power factor of more than 0.8. We discuss future applications of new types of HTS motors for aerospace technology, on-land industry and transport systems.

  1. In-situ estimation of structural power transmission from machinery source installations

    DEFF Research Database (Denmark)

    Ohlrich, Mogens

    1999-01-01

    There is continued work on developing methods for characterising structureborne sound sources and for predicting the transmission of structural power into source foundations and receiving structures. However, at present there is no agreed measurement method by which such transmission predictions ...

  2. Review of the Structure of Bulk Power Markets Grid of the Future White Paper

    Energy Technology Data Exchange (ETDEWEB)

    Kirby, B.J.

    2000-05-02

    This paper is intended to provide an understanding of the needs of a restructured electricity market and some of the market methods and systems that have developed to address those needs. Chapter 2 discusses the historic market framework of vertically integrated utilities. Chapter 3 introduces the changes to the vertically integrated utility brought about by restructuring. It discusses generation and transmission planning, control and the regulatory process. It also summarizes reliability, security and adequacy. Chapter 4 discusses the basic structures of generation and transmission markets along with transmission-congestion contracts (TCCs) and transmission pricing principles. A discussion is given of the 12 ancillary services needed to reliably operate the power system. Chapter 4 also deals with the role of transmission in opening up markets to competition. In California increments (incs) and decrements (decs) are bid to overcome price differences in different zones caused by congestion. In PJM, any member can purchase Fixed Transmission Rights (FTRs) which allows the member to ''collect rent'' on congested lines and essentially obtain a hedge against congestion. There has been a worrisome slowdown in the growth of the transmission system in the United States since about the mid 70's. However, there are methods for providing incentives for construction of new transmission using tariffs. The California and PJM transmission planning processes are outlined. The Federal Energy Regulatory Commission (FERC) has recently issued a proposed rulemaking on Regional Transmission Organizations (RTOs) which stated that the traditional methods of grid management are showing signs of strain and may be inadequate to support efficient and reliable transmission operations. Chapter 5 provides examples of market implementations and a discussion of the price spikes seen in the Midwest in the summers of 1998 and 1999. An examination of six restructured market

  3. Choice of antenna geometry for microwave power transmission from solar power satellites

    Science.gov (United States)

    Potter, Seth D.

    1992-01-01

    A comparison is made between square and circular transmitting antennas for solar power satellite microwave power transmission. It is seen that the exclusion zone around the rectenna needed to protect populations from microwaves is smaller for a circular antenna operating at 2.45 GHz than it is for a square antenna at that frequency. If the frequency is increased, the exclusion zone size remains the same for a square antenna, but becomes even smaller for a circular antenna. Peak beam intensity is the same for both antennas if the frequency and antenna area are equal. The circular antenna puts a somewhat greater amount of power in the main lobe and somewhat less in the side lobes. Since rain attenuation and atmospheric heating remain problems above 10 GHz, it is recommended that future solar power satellite work concentrate on circular transmitting antennas at frequencies of roughly 10 GHz.

  4. Status of the microwave power transmission components for the solar power satellite

    Science.gov (United States)

    Brown, W. C.

    1981-01-01

    During the 1970-1980 time period a substantial advance has been made in developing all portions of a microwave power transmission system for the solar power satellite (SPS). The most recent advances pertain to the transmitting portion of the system in the satellite and are based upon experimental observations of the use of the magnetron combined with a passive directional device to convert it into a highly efficient directional amplifier with excellent low-noise properties and potentially very long life. The ability of its microwave output to track a phase reference makes it possible to combine it with many other radiating units to provide a highly coherent microwave beam. The ability of its output to track an amplitude reference while operating from a dc power source with varying voltage makes it possible to eliminate most of the power conditioning equipment that would otherwise be necessary.

  5. The Effect Analysis of Strain Rate on Power Transmission Tower-Line System under Seismic Excitation

    OpenAIRE

    Li Tian; Wenming Wang; Hui Qian

    2014-01-01

    The effect analysis of strain rate on power transmission tower-line system under seismic excitation is studied in this paper. A three-dimensional finite element model of a transmission tower-line system is created based on a real project. Using theoretical analysis and numerical simulation, incremental dynamic analysis of the power transmission tower-line system is conducted to investigate the effect of strain rate on the nonlinear responses of the transmission tower and line. The results sho...

  6. Modular VSC converter based HVDC power transmission from offshore wind power plant: Compared to the conventional HVAC system

    DEFF Research Database (Denmark)

    Sharma, Ranjan; Rasmussen, Tonny Wederberg; Jensen, Kim Høj;

    2010-01-01

    power transmission options with HVDC systems are under consideration. In this paper, a comparison between a conventional HVAC transmission system and a HVDC system equipped with modular voltage source converters is provided. The comparison is based on the total energy transmission capability...

  7. Bulk Electrical Cable Non-Destructive Examination Methods for Nuclear Power Plant Cable Aging Management Programs

    Energy Technology Data Exchange (ETDEWEB)

    Glass, Samuel W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Jones, Anthony M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Fifield, Leonard S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hartman, Trenton S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-09-01

    This Pacific Northwest National Laboratory milestone report describes progress to date on the investigation of nondestructive test methods focusing particularly on bulk electrical test methods that provide key indicators of cable aging and damage. The work includes a review of relevant literature as well as hands-on experimental verification of inspection capabilities. As nuclear power plants consider applying for second, or subsequent, license renewal to extend their operating period from 60 years to 80 years, it is important to understand how the materials installed in plant systems and components will age during that time and develop aging management programs to assure continued safe operation under normal and design basis events (DBE). Normal component and system tests typically confirm the cables can perform their normal operational function. The focus of the cable test program, however, is directed toward the more demanding challenge of assuring the cable function under accident or DBE. The industry has adopted 50% elongation at break (EAB) relative to the un-aged cable condition as the acceptability standard. All tests are benchmarked against the cable EAB test. EAB, however, is a destructive test so the test programs must apply an array of other nondestructive examination (NDE) tests to assure or infer the overall set of cable’s system integrity. Assessment of cable integrity is further complicated in many cases by vendor’s use of dissimilar material for jacket and insulation. Frequently the jacket will degrade more rapidly than the underlying insulation. Although this can serve as an early alert to cable damage, direct test of the cable insulation without violating the protective jacket becomes problematic. This report addresses the range of bulk electrical NDE cable tests that are or could be practically implemented in a field-test situation with a particular focus on frequency domain reflectometry (FDR). The FDR test method offers numerous advantages

  8. 78 FR 76140 - Extension of Public Comment Period for the Champlain Hudson Power Express Transmission Line...

    Science.gov (United States)

    2013-12-16

    ... Extension of Public Comment Period for the Champlain Hudson Power Express Transmission Line Project Draft... Hudson Power Express Transmission Line Project Draft Environmental Impact Statement (DOE/EIS-0447). The... permit to the Applicant, Champlain Hudson Power Express, Inc. (CHPEI), to construct, operate,...

  9. 75 FR 81264 - Critical Path Transmission, LLC; Clear Power, LLC; v. California Independent System Operator, Inc...

    Science.gov (United States)

    2010-12-27

    ... Energy Regulatory Commission Critical Path Transmission, LLC; Clear Power, LLC; v. California Independent... (Commission), 18 CFR 385.206 (2010) and sections 206 and 306 of the Federal Power Act, 16 U.S.C. 824e and 825e (2006), Critical Path Transmission, LLC and Clear Power LLC (Complainants) filed a complaint...

  10. 76 FR 56428 - Southern Cross Transmission LLC; Pattern Power Marketing LLC; Notice of Filing

    Science.gov (United States)

    2011-09-13

    ... Energy Regulatory Commission Southern Cross Transmission LLC; Pattern Power Marketing LLC; Notice of Filing Take notice that on September 6, 2011, pursuant to sections 210, 211, and 212 of the Federal Power..., Southern Cross Transmission, LLC (SCT) and Pattern Power Marketing LLC (PPM) jointly filed an...

  11. Stability Enhancement of Power System by Controlling Hvdc Power Flow through the Same Ac Transmission Line

    Directory of Open Access Journals (Sweden)

    P. Upendra Kumar

    2014-04-01

    Full Text Available Long extra high voltage (EHV ac lines cannot be loaded to their thermal limits in order to keep sufficient margin against transient instability. With the scheme proposed in this paper, it is possible to load these lines very close to their thermal limits. The conductors are allowed to carry usual ac along with dc superimposed on it. The added dc power flow does not cause any transient instability. This paper presents the feasibility of converting a double circuit ac line into composite ac–dc power transmission line to get the advantages of parallel ac–dc transmission to improve stability and damping out oscillations. Simulation and experimental studies are carried out for the coordinated control as well as independent control of ac and dc power transmissions. No alterations of conductors, insulator strings, and towers of the original line are needed. Substantial gain in the loadability of the line is obtained. Master current controller senses ac current and regulates the dc current orders for converters online such that conductor current never exceeds its thermal limit. The present paper is implemented by using MATLAB/SIMULINK.

  12. Enhancement of Power Quality in Transmission Line Using Flexible Ac Transmission System Device U.P.F.C (Unified Power Flow Controller

    Directory of Open Access Journals (Sweden)

    B. Divya Lakshmi

    2014-04-01

    Full Text Available Present scenario states that power demand has been increased in a rapid and random manner. Hence power generated is unable to meet the power demand so power scarcity exists. There is an approximate loss of (20 - 40 % of power generated during its transmission. Hence there is a need for enhancing the power quality in transmission lines. In order to improve the power quality our paper make use of FACTS DEVICES. FACTS devices can be added to power transmission and distribution systems at appropriate locations to improve system performance. The real and reactive powers can be easily controlled in a power system with FACTS devices. Flexible AC Transmission System creates a tremendous quality impact on power system stability. This paper describes the basic principle of operation of UPFC, its advantages and to compare its performance with the various FACTS equipment available. The objective of this paper is to keep the power system to remain in voltage stable condition when it experiences a load change and contingency, also deals with the simulation of various FACTS controllers using simulation program with MATLAB/SIMULINK

  13. A Follow-up Study on Wireless Power Transmission for Unmanned Air Vehicles

    Science.gov (United States)

    2007-12-01

    Popovic, “Wireless Powering for Low-Power Distributed Sensors,” Sixth International Symposium Nikola Tesla , 18-20 October 2006. [32] Avago...1 I. INTRODUCTION A. MICROWAVE WIRELESS POWER TRANSMISSION The concept of power transmission dates back to Heinrich Hertz [1] and Nikola ... Tesla [2]. Tesla aimed to develop a high power transmitter to ascertain the law of propagation of current through the earth and the atmosphere. Although

  14. Face Gear Technology for Aerospace Power Transmission Progresses

    Science.gov (United States)

    2005-01-01

    The use of face gears in an advanced rotorcraft transmission design was first proposed by the McDonnell Douglas Helicopter Company during their contracted effort with the U.S. Army under the Advanced Rotorcraft Transmission (ART) program. Face gears would be used to turn the corner between the horizontal gas turbine engine and the vertical output rotor shaft--a function currently done by spiral bevel gears. This novel gearing arrangement would substantially lower the drive system weight partly because a face gear mesh would be used to split the input power between two output gears. However, the use of face gears and their ability to operate successfully at the speeds and loads required for an aerospace environment was unknown. Therefore a proof-of-concept phase with an existing test stand at the NASA Lewis Research Center was pursued. Hardware was designed that could be tested in Lewis' Spiral Bevel Gear Test Rig. The initial testing indicated that the face gear mesh was a feasible design that could be used at high speeds and load. Surface pitting fatigue was the typical failure mode, and that could lead to tooth fracture. An interim project was conducted to see if slight modifications to the gear tooth geometry or an alternative heat treating process could overcome the surface fatigue problems. From the initial and interim tests, it was apparent that for the surface fatigue problems to be overcome the manufacturing process used for this component would have to be developed to the level used for spiral bevel gears. The current state of the art for face gear manufacturing required using less than optimal gear materials and manufacturing techniques because the surface of the tooth form does not receive final finishing after heat treatment as it does for spiral bevel gears. This resulted in less than desirable surface hardness and manufacturing tolerances. An Advanced Research and Projects Agency (ARPA) Technology Reinvestment Project has been funded to investigate

  15. [Design and optimization of wireless power and data transmission for visual prosthesis].

    Science.gov (United States)

    Lei, Xuping; Wu, Kaijie; Zhao, Lei; Chai, Xinyu

    2013-11-01

    Boosting spatial resolution of visual prostheses is an effective method to improve implant subjects' visual perception. However, power consumption of visual implants greatly rises with the increasing number of implanted electrodes. In respond to this trend, visual prostheses need to develop high-efficiency wireless power transmission and high-speed data transmission. This paper presents a review of current research progress on wireless power and data transmission for visual prostheses, analyzes relative principles and requirement, and introduces design methods of power and data transmission.

  16. A Novel Design of Radio Frequency Energy Relays on Power Transmission Lines

    Directory of Open Access Journals (Sweden)

    Jin Tong

    2016-06-01

    Full Text Available In this paper, we investigate the energy problem of monitoring sensors on high-voltage power transmission lines and propose a wireless charging scheme for a Radio Frequency IDentification (RFID sensor tag to solve a commercial efficiency problem: the maintenance-caused power outage. Considering the environmental influences on power transmission lines, a self-powered wireless energy relay is designed to meet the energy requirement of the passive RFID sensor tag. The relay can obtain the electric field energy from the transmission lines and wirelessly power the RFID sensor tags around for longer operating distance. A prototype of the energy relay is built and tested on a 110 kv line. The measurement results show that the energy relay can provide stable energy even with the influences of wind, noise and power outage. To our knowledge, it is the first work to power the RFID sensor tags on power transmission lines.

  17. Design and Development of Wireless Power Transmission for Unmanned Air Vehicles

    Science.gov (United States)

    2012-09-01

    and microstrip transmission lines. .................................... 36 Table 6. Average power at different circuit nodes in the transient...GHz. Efficiencies of 55 to 66 percent were predicted for various circuit designs. However, with microstrip lines, the maximum output power can be...

  18. Structural Properties of Bulk and Aqueous Systems of PEO-PIB-PEO Triblock Copolymers as Studied by Small-Angle Neutron Scattering and Cryo-Transmission Electron Microscopy

    DEFF Research Database (Denmark)

    Mortensen, Kell; Talmon, Yeshayahu; Gao, Bo

    1997-01-01

    The phase behavior of a low molecular weight (M-w = 6000) symmetric triblock copolymer of poly(ethylene oxide) and poly(isobutylene), PEO-PIB-PEO, in the bulk as well in aqueous, D2O, solutions has been studied using small-angle neutron scattering and cryo-transmission electron microscopy...

  19. [Research progress on key technology of power and signal transmission in neuroprosthetic].

    Science.gov (United States)

    Wang, Xing; Peng, Chenglin; Liu, Tao; Wang, Rui; Hou, Wensheng; Zheng, Xiaolin; Zheng, Erxin

    2011-10-01

    The power and signal transmission technology is one of the key technologies in neuroprosthetic research. This paper proposes firstly the related theory of power and signal transmission technology in neuroprosthetic, then summarizes the three key aspects of the power and signal transmission technology in neuroprosthetic. After analyzed the development of the inductive wireless power harvesting technology, the wireless telemetry technology and the wireless power harvesting telemetry technology, the emphasis on research contents will be proposed and discussed, which will help accelerate the further research of prosthetic.

  20. Through-Metal-Wall Power Delivery and Data Transmission for Enclosed Sensors: A Review

    OpenAIRE

    2015-01-01

    The aim of this review was to assess the current viable technologies for wireless power delivery and data transmission through metal barriers. Using such technologies sensors enclosed in hermetical metal containers can be powered and communicate through exterior power sources without penetration of the metal wall for wire feed-throughs. In this review, we first discuss the significant and essential requirements for through-metal-wall power delivery and data transmission and then we: (1) descr...

  1. Bulk Electrical Cable Non-Destructive Examination Methods for Nuclear Power Plant Cable Aging Management Programs

    Energy Technology Data Exchange (ETDEWEB)

    Glass, Samuel W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Jones, Anthony M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Fifield, Leonard S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hartman, Trenton S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-09-01

    This Pacific Northwest National Laboratory milestone report describes progress to date on the investigation of nondestructive test methods focusing particularly on bulk electrical test methods that provide key indicators of cable aging and damage. The work includes a review of relevant literature as well as hands-on experimental verification of inspection capabilities. As nuclear power plants consider applying for second, or subsequent, license renewal to extend their operating period from 60 years to 80 years, it is important to understand how the materials installed in plant systems and components will age during that time and develop aging management programs to assure continued safe operation under normal and design basis events (DBE). Normal component and system tests typically confirm the cables can perform their normal operational function. The focus of the cable test program, however, is directed toward the more demanding challenge of assuring the cable function under accident or DBE. The industry has adopted 50% elongation at break (EAB) relative to the un-aged cable condition as the acceptability standard. All tests are benchmarked against the cable EAB test. EAB, however, is a destructive test so the test programs must apply an array of other nondestructive examination (NDE) tests to assure or infer the overall set of cable’s system integrity. Assessment of cable integrity is further complicated in many cases by vendor’s use of dissimilar material for jacket and insulation. Frequently the jacket will degrade more rapidly than the underlying insulation. Although this can serve as an early alert to cable damage, direct test of the cable insulation without violating the protective jacket becomes problematic. This report addresses the range of bulk electrical NDE cable tests that are or could be practically implemented in a field-test situation with a particular focus on frequency domain reflectometry (FDR). The FDR test method offers numerous advantages

  2. An Insight on Right of Way and its Cost for Power Transmission Cable and Conventional Overhead Transmission Lines

    Science.gov (United States)

    Khandelwal, P.; Pachori, A.; Khandelwal, T.

    2013-12-01

    This paper provides the complete information related to Right of Way (RoW) for the construction of new power transmission line (TL) in terms of present cost for overhead transmission line and underground XLPE transmission cable. The former part of the paper describes the general procedure and rules for acquisition of land for RoW by transmission asset owner (TAO) while in the later part the cost associated to acquire RoW and its impact on the cost of adjacent land have been detailed. It also discusses the actual dismantling cost including the cost of waste metal what TAO get after completion of lifecycle of TL due to increase in metal prices. In this paper cost of RoW after completion of lifecycle of TL is also highlighted. This paper compares the cost of RoW for overhead transmission line and underground XLPE transmission cable for construction of new TL. Also for old transmission infrastructure cost of RoW for change from overhead transmission line to underground XLPE transmission cable is detailed by application of replacement model.

  3. Magnetic properties and power losses in Fe-Co-based bulk metallic glasses

    Energy Technology Data Exchange (ETDEWEB)

    Piccin, R. [Dip. Chim. IFM and NIS, Universita di Torino, Via P. Giuria 9, Torino 10125 (Italy)], E-mail: rafael.piccin@unito.it; Tiberto, P. [Electromagnetism Division, INRIM, Strade delle Cacce 91, Torino 10135 (Italy); Chiriac, H. [National Institute of Research and Development for Technical Physics, 47 Mangeron Blvd., Iasi 700050 (Romania); Baricco, M. [Dip. Chim. IFM and NIS, Universita di Torino, Via P. Giuria 9, Torino 10125 (Italy)

    2008-10-15

    Magnetic properties of Fe-Co-based bulk metallic glasses have been experimentally investigated. Samples were prepared by water-cooled Cu-mold injection casting technique. The samples have cylindrical shapes with 0.8 mm diameter and 30 mm length. Amorphous structures were confirmed by the presence of a main halo in X-ray diffraction patterns and by the detection of crystallization signal around 650 deg. C using differential scanning calorimetry. Owing to their amorphous structure, these materials present good soft magnetic properties with coercivity below 100 A/m and magnetic induction around 1.0 T in quasi-static conditions. Hysteresis loops were measured using a digital wattmeter with controlled induction waveform. Power losses were analyzed for the following compositions: [(Fe{sub 1-x}Co{sub x}){sub 75}B{sub 20}Si{sub 5}]{sub 93}Nb{sub 4}Y{sub 3} (x=0, 0.2, 0.4, 0.5 and 0.6) over a range of frequencies from 1 to 400 Hz at selected fixed peak inductions. Co addition has shown to improve the soft magnetic properties when x=0.2, 0.4 and 0.5, decreasing coercive fields and power losses, while the magnetic induction is slightly increased (except for x=0.5). Further Co addition (x=0.6) is detrimental for the soft magnetic properties due to the presence of crystalline {alpha}-Fe-(Co) and boride phases. The frequency dependence of power losses was described using a separation theory. It has been observed that an f{sup 1/2} rule is in good agreement with the experimental data.

  4. Cost and Benefit Analysis of VSC-HVDC Schemes for Offshore Wind Power Transmission

    Institute of Scientific and Technical Information of China (English)

    Sheng WANG; Chunmei FENG; An WEN; Jun LIANG

    2013-01-01

    Due to low load factors of wind power generation,it is possible to reduce transmission capacity to minimize the cost of transmission system construction.Two VSC-HVDC schemes for offshore wind farm,called the point to point (PTP) and DC mesh connections are compared in terms of the utilization of transmission system and its cost.A Weibull distribution is used for estimating offshore wind power generation,besides,the cross correlation between wind farms is considered.The wind energy curtailment is analyzed using the capacity output possibility table (COPT).The system power losses,costs of transmission investment and wind energy curtailment are also computed.A statistic model for the wind generation and transmission is built and simulated in MATLAB to validate the study.It is concluded that a DC mesh transmission can reduce the energy curtailment and power losses.Further benefit is achievable as the wind cross correlation between wind farms decreases.

  5. 47 CFR 74.795 - Digital low power TV and TV translator transmission system facilities.

    Science.gov (United States)

    2010-10-01

    ... translator transmission system facilities. (a) A digital low power TV or TV translator station shall operate... 47 Telecommunication 4 2010-10-01 2010-10-01 false Digital low power TV and TV translator transmission system facilities. 74.795 Section 74.795 Telecommunication FEDERAL COMMUNICATIONS...

  6. Electrical Power Transmission and Distribution Safety. Module SH-40. Safety and Health.

    Science.gov (United States)

    Center for Occupational Research and Development, Inc., Waco, TX.

    This student module on electrical power transmission and distribution safety is one of 50 modules concerned with job safety and health. This module focuses on some of the general safety rules, techniques, and procedures that are essential in establishing a safe environment for the electrical power transmission worker. Following the introduction,…

  7. 75 FR 6199 - Central Minnesota Municipal Power Agency and Midwest Municipal Transmission Group, Inc.; Notice...

    Science.gov (United States)

    2010-02-08

    ... Federal Energy Regulatory Commission Central Minnesota Municipal Power Agency and Midwest Municipal Transmission Group, Inc.; Notice of Filing February 1, 2010. Take notice that on January 25, 2010, Central Minnesota Municipal Power Agency and Midwest Municipal Transmission Group, Inc. (CMMPA/ MMTG) filed with...

  8. An asymmetric resonant coupling wireless power transmission link for Micro-Ball Endoscopy.

    Science.gov (United States)

    Sun, Tianjia; Xie, Xiang; Li, Guolin; Gu, Yingke; Deng, Yangdong; Wang, Ziqiang; Wang, Zhihua

    2010-01-01

    This paper investigates the design and optimization of a wireless power transmission link targeting Micro-Ball Endoscopy applications. A novel asymmetric resonant coupling structure is proposed to deliver power to an endoscopic Micro-Ball system for image read-out after it is excreted. Such a technology enables many key medical applications with stringent requirements for small system volume and high power delivery efficiency. A prototyping power transmission sub-system of the Micro-Ball system was implemented. It consists of primary coil, middle resonant coil, and cube-like full-direction secondary receiving coils. Our experimental results proved that 200mW of power can be successfully delivered. Such a wireless power transmission capability could satisfy the requirements of the Micro-Ball based endoscopy application. The transmission efficiency is in the range of 41% (worst working condition) to 53% (best working condition). Comparing to conventional structures, Asymmetric Resonant Coupling Structure improves power efficiency by 13%.

  9. Optimisation of power transmission systems using a discrete Tabu Search method

    OpenAIRE

    Connor, Andy M.; Tilley, Derek G.

    2016-01-01

    This paper presents a brief description of the Tabu Search method and shows how it can be applied to two different power transmission systems. Examples are presented from two transmission systems. In the first example a mechanical transmission system is considered. A four bar mechanism is synthesised in order to produce a desired output motion. The second example is a hydrostatic transmission operating under closed loop control in order to maintain a constant operating speed as the loading co...

  10. Mathematical model for the power supply system of an autonomous object with an AC power transmission over a cable rope

    Science.gov (United States)

    Rulevskiy, V. M.; Bukreev, V. G.; Shandarova, E. B.; Kuleshova, E. O.; Shandarov, S. M.; Vasilyeva, Yu Z.

    2017-02-01

    A modeling problem of the power system, which provides an AC power transmission to a submersible device over the conducting rope, was considered. The power supply system units and their parameters are described. The system multi-dimensional mathematical model in the variables state space with regard to the nonlinear characteristic of system elements is proposed.

  11. Design And Structural Analysis Of A Powered Wheelchair Transmission

    Science.gov (United States)

    Geonea, Ionut Daniel; Dumitru, Nicolae; Margine, Alexandru

    2015-09-01

    In this paper are presented the author's researches on designing, dynamical and structural evaluation of a transmission for a wheelchair, intended to persons with locomotors disabilities. The kinematics of proposed transmission is analyzed in order to realize a proper synthesis and design of gears. A 3D model of the transmission and wheelchair are designed in Solid Works, and they will be used for the dynamic simulation of the wheelchair robotic system in Adams software. In Adams is analyzed wheelchair trajectory and dynamics for a combined trajectory: linear motion and steering. Dynamic parameters obtained from simulation are used to perform a finite element analysis of bevel and worm gears. Simulation results reveal the transmission dynamics parameters, emphasize the efficiency of the transmission and enable implementation of this design to a wheelchair model.

  12. Investigation of a matrix converter for contactless power transmission systems; Untersuchung eines Matrixumrichters fuer kontaktlose Energieuebertragungssysteme

    Energy Technology Data Exchange (ETDEWEB)

    Ecklebe, Andreas

    2009-05-22

    The publication discusses a three- to two-phase matrix converter for contactless power transmission systems. Based on relevant publications, possible resonance setups for contactless power transmission systems are investigated to begin with. An analysis of relevant parameters shows the differences between the various setups, but it also shows that for an investigation focusing on the feeding converter, simple modelling of the three investigated resonance setups is possible with the aid of a serial oscillating circuit. In consequence, it should be possible to apply the results also to the matrix converter with other serially resonant loads. The second part of the investigation focuses on the matrix converter. After a theoretical description, a combination von high-frequency control - e.g. bulk pulsing - and low-frequency pulsing patterns for setting the harmonics level of the grid currents is presented. The similarity to a conventional H bridge circuit enables an assessment of commutation and the identification of the necessary inverter states. These are characterized in that a bidirectional connection between the input system and each output phase is available at any time. The functioning of the commutation and of the inverter as a whole is proved by simulation in a first step, in which also the dynamic switching characteristics of the power semiconductors is taken into account. Finally, the results of laboratory measurements are presented and compared with the theoretical results. The laboratory setup consists of the power section of the matrix converter with input filters and modular gate drivers, a DSP/FPGA control system, and a contactless power transmission system with a current inverter and load on the secondary side. The investigation thus provides information on the use of the three-to-two phase matrix converter as an interesting alternative for feeding of contactless power transmission systems and other serially resonant loads. (orig.) [German] Diese

  13. Investigation of a matrix converter for contactless power transmission systems; Untersuchung eines Matrixumrichters fuer kontaktlose Energieuebertragungssysteme

    Energy Technology Data Exchange (ETDEWEB)

    Ecklebe, Andreas

    2009-05-22

    The publication discusses a three- to two-phase matrix converter for contactless power transmission systems. Based on relevant publications, possible resonance setups for contactless power transmission systems are investigated to begin with. An analysis of relevant parameters shows the differences between the various setups, but it also shows that for an investigation focusing on the feeding converter, simple modelling of the three investigated resonance setups is possible with the aid of a serial oscillating circuit. In consequence, it should be possible to apply the results also to the matrix converter with other serially resonant loads. The second part of the investigation focuses on the matrix converter. After a theoretical description, a combination von high-frequency control - e.g. bulk pulsing - and low-frequency pulsing patterns for setting the harmonics level of the grid currents is presented. The similarity to a conventional H bridge circuit enables an assessment of commutation and the identification of the necessary inverter states. These are characterized in that a bidirectional connection between the input system and each output phase is available at any time. The functioning of the commutation and of the inverter as a whole is proved by simulation in a first step, in which also the dynamic switching characteristics of the power semiconductors is taken into account. Finally, the results of laboratory measurements are presented and compared with the theoretical results. The laboratory setup consists of the power section of the matrix converter with input filters and modular gate drivers, a DSP/FPGA control system, and a contactless power transmission system with a current inverter and load on the secondary side. The investigation thus provides information on the use of the three-to-two phase matrix converter as an interesting alternative for feeding of contactless power transmission systems and other serially resonant loads. (orig.) [German] Diese

  14. Power Split Based Dual Hemispherical Continuously Variable Transmission

    Directory of Open Access Journals (Sweden)

    Douwe Dresscher

    2017-04-01

    Full Text Available In this work, we present a new continuously variable transmission concept: the Dual-Hemi Continuously Variable Transmission (CVT. It is designed to have properties we believe are required to apply continuously variable transmissions in robotics to their full potential. These properties are a transformation range that includes both positive and negative ratios, back-drivability under all conditions, kinematically decoupled reconfiguration, high efficiency of the transmission, and a reconfiguration mechanism requiring little work for changing the transmission ratio. The design of the Dual-Hemi CVT and a prototype realisation are discussed in detail. We show that the Dual-Hemi CVT has the aforementioned desired properties. Experiments show that the efficiency of the CVT is above 90% for a large part of the range of operation of the CVT. Significant stiction in the transmission, combined with a relatively low bandwidth for changing the transmission ratio, may cause problems when applying the DH-CVT as part of an actuator in a control loop.

  15. Low-power system-on-chip implementation for respiratory rate detection and transmission.

    Science.gov (United States)

    Padasdao, Bryson; Yee, Roxanne; Boric-Lubecke, Olga

    2012-01-01

    Recent biosensors can measure respiratory rate non-invasively, but limits patient mobility or requires regular battery replacement. Respiratory effort, which can scavenge mW, may power the sensor, but requires minimal sensor power usage. This paper demonstrates feasibility of respiratory rate measurement by using a comparator instead of ADC. A low-power system-on-chip can implement respiratory rate detection and wireless data transmission with a total power consumption under 82 µW. This approach produces significant power savings, and transmission uses under 30% of total power consumption.

  16. Power Transmission Through Timing Belt In Two Wheeler Motors

    Directory of Open Access Journals (Sweden)

    Gurumurthy Veerapathiran

    2015-03-01

    Full Text Available This paper studies the effect of noise and friction on performance of the chain drive system for motor bikes. Experiment shows that chain transmission in chain drive system leads to poor overall performance, due to its noise and chain gets loose due to aging and sprockets wear due to chain friction etc., the proposed system consists of drive and driven pulley with timing belt transmission. Compared to conventional method, proposed method give improved tension in pulleys and belt by the additional arrangement called belt tensioner. This gives good overall performance of the system, and reduces noise, vibration and gives high transmission speed.

  17. Power-Controlled Data Transmission in Wireless Ad-Hoc Networks: Challenges and Solutions

    Directory of Open Access Journals (Sweden)

    Bilgehan Berberoglu

    2016-01-01

    Full Text Available Energy scarcity and interference are two important factors determining the performance of wireless ad-hoc networks that should be considered in depth. A promising method of achieving energy conservation is the transmission power control. Transmission power control also contributes to the mitigation of interference thereby promotes throughput by means of rendering multiple hosts to communicate in the same neighborhood simultaneously without impairing each other’s transmissions. However, as identified previously in the literature, traditional hidden terminal problem gets deteriorated when transmission power control mechanism is intended to be applied. In this article, we discuss the primary details about the power usage and throughput deficiency of the traditional 802.11 RTS/CTS mechanism. Improvements by means of power control are introduced as well as the solutions to the challenges likely to emerge because of the usage of diverse power levels throughout the network.

  18. Millimeter-Gap Magnetically Insulated Transmission Line Power Flow Experiments

    Energy Technology Data Exchange (ETDEWEB)

    Hutsel, Brian Thomas [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Stoltzfus, Brian S. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Fowler, William E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); LeChien, Keith R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Mazarakis, Michael G. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Moore, James K. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Mulville, Thomas D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Savage, Mark E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Stygar, William A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); McKenney, John L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Jones, Peter A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); MacRunnels, Diego J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Long, Finis W. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Porter, John L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-09-01

    An experiment platform has been designed to study vacuum power flow in magnetically insulated transmission lines (MITLs). The platform was driven by the 400-GW Mykonos-V accelerator. The experiments conducted quantify the current loss in a millimeter-gap MITL with respect to vacuum conditions in the MITL for two different gap distances, 1.0 and 1.3 mm. The current loss for each gap was measured for three different vacuum pump down times. As a ride along experiment, multiple shots were conducted with each set of hardware to determine if there was a conditioning effect to increase current delivery on subsequent shots. The experiment results revealed large differences in performance for the 1.0 and 1.3 mm gaps. The 1.0 mm gap resulted in current loss of 40%-60% of peak current. The 1.3 mm gap resulted in current losses of less than 5% of peak current. Classical MITL models that neglect plasma expansion predict that there should be zero current loss, after magnetic insulation is established, for both of these gaps. The experiments result s indicate that the vacuum pressure or pump down time did not have a significant effect on the measured current loss at vacuum pressures between 1e-4 and 1e-5 Torr. Additionally, there was not repeatable evidence of a conditioning effect that reduced current loss for subsequent full-energy shots on a given set of hardware. It should be noted that the experiments conducted likely did not have large loss contributions due to ion emission from the anode due to the relatively small current densi-ties (25-40 kA/cm) in the MITL that limited the anode temperature rise due to ohmic heating. The results and conclusions from these experiments may have limited applicability to MITLs of high current density (>400 kA/cm) used in the convolute and load region of the Z which experience temperature increases of >400° C and generate ion emission from anode surfaces.

  19. Underwater Acoustic Networks: Channel Models and Network Coding based Lower Bound to Transmission Power for Multicast

    CERN Document Server

    Lucani, Daniel E; Stojanovic, Milica

    2008-01-01

    The goal of this paper is two-fold. First, to establish a tractable model for the underwater acoustic channel useful for network optimization in terms of convexity. Second, to propose a network coding based lower bound for transmission power in underwater acoustic networks, and compare this bound to the performance of several network layer schemes. The underwater acoustic channel is characterized by a path loss that depends strongly on transmission distance and signal frequency. The exact relationship among power, transmission band, distance and capacity for the Gaussian noise scenario is a complicated one. We provide a closed-form approximate model for 1) transmission power and 2) optimal frequency band to use, as functions of distance and capacity. The model is obtained through numerical evaluation of analytical results that take into account physical models of acoustic propagation loss and ambient noise. Network coding is applied to determine a lower bound to transmission power for a multicast scenario, fo...

  20. Review and Latest Trends in Mobile Robots Used on Power Transmission Lines

    Directory of Open Access Journals (Sweden)

    Rogério Sales Gonçalves

    2013-12-01

    Full Text Available This paper presents the current state of the art in mobile robots used on power transmission lines. Many theoretical and experimental studies have been conducted in order to develop autonomous machines to travel along transmission lines to perform inspection and/or repair work. These machines can improve efficiency, reduce labour costs and are expected to reduce the risk of injury to maintenance personnel. Despite there already being a number of pieces of theoretical research and technological developments in this area, problems related to stability, ability and autonomy still exist. As such, first this paper presents the main studies already carried out and the devices generally used on power transmission lines. After the latest trends have been presented, a new idea for module robots carrying out inspections/maintenance of power transmission lines is presented. Finally, the future of mobile robots applied to power transmission lines is discussed.

  1. Renewable Electricity Futures Study. Volume 4: Bulk Electric Power Systems. Operations and Transmission Planning

    Energy Technology Data Exchange (ETDEWEB)

    Milligan, Michael [National Renewable Energy Lab. (NREL), Golden, CO (United States); Ela, Erik [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hein, Jeff [National Renewable Energy Lab. (NREL), Golden, CO (United States); Schneider, Thomas [National Renewable Energy Lab. (NREL), Golden, CO (United States); Brinkman, Gregory [National Renewable Energy Lab. (NREL), Golden, CO (United States); Denholm, Paul [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2012-06-15

    The Renewable Electricity Futures (RE Futures) Study investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050. The analysis focused on the sufficiency of the geographically diverse U.S. renewable resources to meet electricity demand over future decades, the hourly operational characteristics of the U.S. grid with high levels of variable wind and solar generation, and the potential implications of deploying high levels of renewables in the future. RE Futures focused on technical aspects of high penetration of renewable electricity; it did not focus on how to achieve such a future through policy or other measures. Given the inherent uncertainties involved with analyzing alternative long-term energy futures as well as the multiple pathways that might be taken to achieve higher levels of renewable electricity supply, RE Futures explored a range of scenarios to investigate and compare the impacts of renewable electricity penetration levels (30%–90%), future technology performance improvements, potential constraints to renewable electricity development, and future electricity demand growth assumptions. RE Futures was led by the National Renewable Energy Laboratory (NREL) and the Massachusetts Institute of Technology (MIT). Learn more at the RE Futures website. http://www.nrel.gov/analysis/re_futures/

  2. Renewable Electricity Futures Study. Volume 4: Bulk Electric Power Systems: Operations and Transmission Planning

    Energy Technology Data Exchange (ETDEWEB)

    Milligan, M.; Ela, E.; Hein, J.; Schneider, T.; Brinkman, G.; Denholm, P.

    2012-06-01

    The Renewable Electricity Futures (RE Futures) Study investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050. The analysis focused on the sufficiency of the geographically diverse U.S. renewable resources to meet electricity demand over future decades, the hourly operational characteristics of the U.S. grid with high levels of variable wind and solar generation, and the potential implications of deploying high levels of renewables in the future. RE Futures focused on technical aspects of high penetration of renewable electricity; it did not focus on how to achieve such a future through policy or other measures. Given the inherent uncertainties involved with analyzing alternative long-term energy futures as well as the multiple pathways that might be taken to achieve higher levels of renewable electricity supply, RE Futures explored a range of scenarios to investigate and compare the impacts of renewable electricity penetration levels (30%-90%), future technology performance improvements, potential constraints to renewable electricity development, and future electricity demand growth assumptions. RE Futures was led by the National Renewable Energy Laboratory (NREL) and the Massachusetts Institute of Technology (MIT).

  3. Network Parameters Impact on Dynamic Transmission Power Control in Vehicular Ad hoc Networks

    Directory of Open Access Journals (Sweden)

    Khan Muhammad Imran

    2013-09-01

    Full Text Available In vehicular ad hoc networks, the dynamic change in transmission power is very effective to increase the throughput of the wireless vehicular network and decrease the delay of the message communicationbetween vehicular nodes on the highway. Whenever an event occurs on the highway, the reliability of the communication in the vehicular network becomes so vital so that event created messages shouldreach to all the moving network nodes. It becomes necessary that there should be no interference fromoutside of the network and all the neighbor nodes should lie in the transmission range of thereference vehicular node. Transmission range is directly proportional to the transmission power the moving node. If the transmission power will be high, the interference increases that can cause higherdelay in message reception at receiver end, hence the performance of the network decreased. In this paper, it is analyzed that how transmission power can be controlled by considering other differentparameter of the network such as; density, distance between moving nodes, different types of messages dissemination with their priority, selection of an antenna also affects on the transmission power. Thedynamic control of transmission power in VANET serves also for the optimization of the resources where it needs, can be decreased and increased depending on the circumstances of the network.Different applications and events of different types also cause changes in transmission power to enhance the reachability. The analysis in this paper is comprised of density, distance with single hop and multihop message broadcasting based dynamic transmission power control as well as antenna selection and applications based. Some summarized tables are produced according to the respective parameters of the vehicular network. At the end some valuable observations are made and discussed in detail. This paper concludes with a grand summary of all the protocols discussed in it.

  4. Modelling the geographic distribution of wind power and the impact on transmission needs

    DEFF Research Database (Denmark)

    Østergaard, Poul Alberg

    2003-01-01

    Through energy systems modelling, transmission systems modelling and geographical modelling, the article examines the sensitivity of the response of the transmission system to the geographic distributions of wind power and in particular the sensitivity of the results to the accuracy...... of the distributed modelled. The results show that accuracy of the geographic modelling while important for the analysis of specific single transmission lines is not important for the analysis of the general response of the transmission system. The analyses thus corroborate previous analyses that demonstrated...... that scattered laod balancing reduce transmission capacity requirements....

  5. The integration of renewable energy sources into electric power transmission systems

    Energy Technology Data Exchange (ETDEWEB)

    Barnes, P.R.; Dykas, W.P.; Kirby, B.J.; Purucker, S.L. [Oak Ridge National Lab., TN (United States); Lawler, J.S. [Univ. of Tennessee, Knoxville, TN (United States)

    1995-07-01

    Renewable energy technologies such as photovoltaics, solar thermal power plants, and wind turbines are nonconventional, environmentally attractive sources of energy that can be considered for electric power generation. Many of the areas with abundant renewable energy resources (very sunny or windy areas) are far removed from major load centers. Although electrical power can be transmitted over long distances of many hundreds of miles through high-voltage transmission lines, power transmission systems often operate near their limits with little excess capacity for new generation sources. This study assesses the available capacity of transmission systems in designated abundant renewable energy resource regions and identifies the requirements for high-capacity plant integration in selected cases. In general, about 50 MW of power from renewable sources can be integrated into existing transmission systems to supply local loads without transmission upgrades beyond the construction of a substation to connect to the grid. Except in the Southwest, significant investment to strengthen transmission systems will be required to support the development of high-capacity renewable sources of 1000 MW or greater in areas remote from major load centers. Cost estimates for new transmission facilities to integrate and dispatch some of these high-capacity renewable sources ranged from several million dollars to approximately one billion dollars, with the latter figure an increase in total investment of 35%, assuming that the renewable source is the only user of the transmission facility.

  6. A development of ITV system for power transmission line monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Hong Keun; Kim, Seok Ku; Lee, Kwang Joong; Lee, Won Bin [Korea Electric Power Corp. (KEPCO), Taejon (Korea, Republic of). Research Center

    1995-12-31

    Transmission lines which are important to supply the electricity installed on the terrestrially severe site such as mountains needed to be monitored to prevent electric fault by snow accelerating, icing, tree contact, fire etc. Inspections by human patrol has been done but it seems not so efficient and satisfiable. To cope with this a transmission line monitoring system using industrial television and OPGW was developed and field trilled at the site. This paper describes about the optical video transceiver, video distributor and control devices (author).

  7. 76 FR 44320 - Buckeye Power, Inc. v. American Transmission Systems, Incorporated; Notice of Complaint

    Science.gov (United States)

    2011-07-25

    ... Energy Regulatory Commission Buckeye Power, Inc. v. American Transmission Systems, Incorporated; Notice of Complaint Take notice that on July 18, 2011, pursuant to sections 206 and 306 of the Federal Power... (Commission), Buckeye Power, Inc. (Buckeye or Complainant) filed a formal complaint against...

  8. Power transmission by laser beam from lunar-synchronous satellite

    Science.gov (United States)

    Williams, M. D.; Deyoung, R. J.; Schuster, G. L.; Choi, S. H.; Dagle, J. E.; Coomes, E. P.; Antoniak, Z. I.; Bamberger, J. A.; Bates, J. M.; Chiu, M. A.

    1993-01-01

    The possibility of beaming power from synchronous lunar orbits (the L1 and L2 Lagrange points) to a manned long-range lunar rover is addressed. The rover and two versions of a satellite system (one powered by a nuclear reactor, the other by photovoltaics) are described in terms of their masses, geometries, power needs, missions, and technological capabilities. Laser beam power is generated by a laser diode array in the satellite and converted to 30 kW of electrical power at the rover. Present technological capabilities, with some extrapolation to near future capabilities, are used in the descriptions. The advantages of the two satellite/rover systems over other such systems and over rovers with onboard power are discussed along with the possibility of enabling other missions.

  9. Control approach for comfortable power shifting in hybrid transmissions - ML 450 hybrid

    Energy Technology Data Exchange (ETDEWEB)

    Saenger Zetina, Siegfried; Neiss, Konstantin [Daimler AG, Hybrid Development Center, Troy, MI (United States)

    2008-07-01

    The comfortable shifting control in a luxury class vehicle is extremely important, due to competitive automatic transmissions with torque converters; clutch automated manual transmissions and dual clutch transmissions. Hybrid transmissions play a key role in comfort and performance enhancement while at the same time being fuel efficient with the aid of electric machines and battery packs. Here, the alternative to conventional add-on hybrid power head transmissions: the power split hybrid transmission is studied. As a practical example, the Two Mode of the Hybrid Development Center is used within the ML450 Hybrid. For achieving a smooth shifting, there are model based algorithms needed. As objective measure to evaluate the shifting the VDV (Vibration Dose Value) is used. (orig.)

  10. Review on Commissioning Test of Three Gorges Power Transmission & Substation Project

    Institute of Scientific and Technical Information of China (English)

    Yang Wankai; Yin Yonghua; Zeng Nanchao; Wang Minxin; Chong Zhiyi; Ma Weimin; Kang Jian; Yang Xiaoli

    2009-01-01

    @@ Holding the greatest power transmission capacity in China,Three Gorges power transmission and substation (T&S) project is an important landmark in the history of Chinese power transmission construction.Based on the technological achievements[1-5]and operational experience[6-8]in the field of AC/DC power T&S projects,the commissioning test of the Three Gorges power T&S project made scientific calculation and simulation tests according to the features of power T&S projects,carefully formulated the test scheme and plan,and fulfilled all the test items with high efficiency and quality,which provides a technological basis for project acceptance and the assurance for timely putting into operation.

  11. A Study on the Application for Enhancing the Transmission Capability of the KEPCO Power System

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Han; Kwon, Tea Won; Whang, Jong Young; Lee, Gun Joon; Kim, Tae Hoon; Chang, Byung Hoon; Min, Wan Ki [Korea Electric Power Research Institute, Taejon (Korea, Republic of); Park, Young Moon; Park, Jong Gun [Seoul National University, Seoul (Korea, Republic of); Kim, Gun Joong [Chungnam National University, Taejon (Korea, Republic of); Oh, Tae Kwu; Choi, Kwu Hyung [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1996-12-31

    Investigation of stability for power system in 2000 year and 2006 year by using the analysis of real power system. Comparative investigation of the conventional transmission line upgrading methods such as HVDC, HOP, new conductor scheme. Investigation of FACTS, the recent transmission line upgrading method, with respect to the aspect of technique and cost and effect analysis when this method is applied to real power system. Development of the evaluation method of transmission type that should be considered when above method is applied to real power system with respect to aspect of technique and cost. Development of a long-range plan for the transmission capacity upgrading and the evaluation method of reliability. (author).

  12. RSSI/LQI-based transmission power control for body area networks in healthcare environment.

    Science.gov (United States)

    Kim, Seungku; Kim, Seokhwan; Eom, Doo-Seop

    2013-05-01

    This paper presents a novel transmission power control protocol for body area networks. Conventional transmission power control protocols adjust the transmission power on the basis of the received signal strength indication (RSSI). However, in case of the presence of interference, the RSSI is not a correct indicator to determine the link state. We first present the empirical evidence for this and then propose a practical protocol to discriminate between the signal attenuation and interference using the RSSI and link quality indication (LQI). This protocol controls the transmission power and avoids interference based on the link state. Finally, we discuss the implementation of the proposed protocol on Tmote Sky and evaluate the performance in the presence and absence of interference. The experimental results showed that the proposed protocol has high energy-efficiency and reliability, even in the presence of interference.

  13. Laser Power Transmission Employing a Dual-Use Photovoltaic Concentrator at the Receiving End Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed innovation is a wireless laser power transmission system employing a dual-use photovoltaic concentrator at the receiving end. Specifically, the laser...

  14. Laser Power Transmission Employing a Dual-Use Photovoltaic Concentrator at the Receiving End Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed innovation is a wireless laser power transmission system employing a dual-use photovoltaic concentrator at the receiving end. Specifically, the laser...

  15. The Issues of Reactive Power Compensation in High-voltage Transmission Lines

    Directory of Open Access Journals (Sweden)

    Zbigniew Lubośny

    2015-06-01

    Full Text Available This paper discusses the selection of compensation shunt reactors for a double-circuit 400 kV transmission line using the example of the newly built Elk Bis – Alytus transmission line. The analysis takes into account various conditions of the power system. The published results relate to voltage levels in steady states and during switching processes and short circuits.

  16. 75 FR 41895 - Emerson Power Transmission, a Division of Emerson Electric Co., Including On-Site Leased From...

    Science.gov (United States)

    2010-07-19

    ... Employment and Training Administration Emerson Power Transmission, a Division of Emerson Electric Co..., 2010, applicable to workers of Emerson Power Transmission, a Division of Emerson Electric Co... were employed on-site at the Ithaca, New York, location of Emerson Power Transmission, a Division...

  17. 75 FR 9573 - Minnkota Power Cooperative, Inc: Bemidji-Grand Rapids 230kV Transmission Project

    Science.gov (United States)

    2010-03-03

    ... Rural Utilities Service Minnkota Power Cooperative, Inc: Bemidji-Grand Rapids 230kV Transmission Project... Minnkota Power Cooperative, Inc (Minnkota) for the construction of a 230 kilovolt (kV) kV transmission line... Minnesota Power, proposes to construct and operate a 230 kV transmission line between the Wilton...

  18. A study of electric power transmission lines for use on the lunar surface

    Science.gov (United States)

    Gordon, Lloyd B.; Gaustad, Krista L.

    1991-01-01

    Analytical models have been developed to study the operating characteristics of electrical transmission lines for use on the lunar surface. Important design considerations for a transmission line operating on the lunar surface are mass, temperature, and efficiency. Transmission line parameters which impact these considerations include voltage, power loss, and waveform. The electrical and thermal models developed are used to calculate transmission line mass, size, and temperature as a function of voltage, geometry, waveform, location, and efficiency. The analyses include ac and dc for above and below ground operation. Geometries studied include a vacuum-insulated, two-wire transmission line and a solid-dielectric insulated, coaxial transmission line. A brief discussion of design considerations and the models developed is followed by results for parameter studies for both dc and ac transmission lines.

  19. Stillbirth and residential proximity to extremely low frequency power transmission lines: a retrospective cohort study.

    Science.gov (United States)

    Auger, Nathalie; Park, Alison L; Yacouba, Soumana; Goneau, Marc; Zayed, Joseph

    2012-02-01

    The relationship between electromagnetic field exposure and stillbirth has not been evaluated. We assessed associations between residential proximity to extremely low frequency power transmission lines and stillbirth across gestational age. Data included singleton live births (N=514,826) and stillbirths (N=2033) for 1998-2007 in metropolitan areas of Québec, Canada. Using power transmission line maps, the distances between lines and residential six-digit postal codes (rule out a possible link.

  20. Evaluation of power system security and development of transmission pricing method

    Science.gov (United States)

    Kim, Hyungchul

    The electric power utility industry is presently undergoing a change towards the deregulated environment. This has resulted in unbundling of generation, transmission and distribution services. The introduction of competition into unbundled electricity services may lead system operation closer to its security boundaries resulting in smaller operating safety margins. The competitive environment is expected to lead to lower price rates for customers and higher efficiency for power suppliers in the long run. Under this deregulated environment, security assessment and pricing of transmission services have become important issues in power systems. This dissertation provides new methods for power system security assessment and transmission pricing. In power system security assessment, the following issues are discussed (1) The description of probabilistic methods for power system security assessment; (2) The computation time of simulation methods; (3) on-line security assessment for operation. A probabilistic method using Monte-Carlo simulation is proposed for power system security assessment. This method takes into account dynamic and static effects corresponding to contingencies. Two different Kohonen networks, Self-Organizing Maps and Learning Vector Quantization, are employed to speed up the probabilistic method. The combination of Kohonen networks and Monte-Carlo simulation can reduce computation time in comparison with straight Monte-Carlo simulation. A technique for security assessment employing Bayes classifier is also proposed. This method can be useful for system operators to make security decisions during on-line power system operation. This dissertation also suggests an approach for allocating transmission transaction costs based on reliability benefits in transmission services. The proposed method shows the transmission transaction cost of reliability benefits when transmission line capacities are considered. The ratio between allocation by transmission line

  1. An Improved Rectenna for Wireless Power Transmission for Unmanned Air Vehicles

    Science.gov (United States)

    2011-09-01

    A. Background The concept of wireless power transmission (WPT) dates back to the days of Heinrich Hertz and Nikola Tesla [1], who discovered that...energy could be transported by electromagnetic waves in free space. Tesla considered the use of wireless power transmission employing low-frequency...his article, Brown wrote a description of the development of WPT and the milestones along the way. Previously, Tesla carried out numerous

  2. Transmission of High-Power Electron Beams Through Small Apertures

    CERN Document Server

    Tschalär, C; Balascuta, S.; Benson, S.V.; Bertozzi, W.; Boyce, J.R.; Cowan, R.; Douglas, D.; Evtushenko, P.; Fisher, P.; Ihloff, E.; Kalantarians, N.; Kelleher, A.; Legg, R.; Milner, R.G.; Neil, G.R.; Ou, L.; Schmookler, B.; Tennant, C.; Williams, G.P.; Zhang, S.

    2013-01-01

    Tests were performed to pass a 100 MeV, 430 kWatt c.w. electron beam from the energy-recovery linac at the Jefferson Laboratory's FEL facility through a set of small apertures in a 127 mm long aluminum block. Beam transmission losses of 3 p.p.m. through a 2 mm diameter aperture were maintained during a 7 hour continuous run.

  3. Test Results from a Simulated High Voltage Lunar Power Transmission Line

    Science.gov (United States)

    Birchenough, Arthur; Hervol, David

    2008-01-01

    The Alternator Test Unit (ATU) in the Lunar Power System Facility (LPSF) located at the NASA Glenn Research Center (GRC) in Cleveland, OH was modified to simulate high voltage transmission capability. The testbed simulated a 1 km transmission cable length from the ATU to the LPSF using resistors and inductors installed between the distribution transformers. Power factor correction circuitry was used to compensate for the reactance of the distribution system to improve the overall power factor. This test demonstrated that a permanent magnet alternator can successfully provide high frequency AC power to a lunar facility located at a distance.

  4. Test Results From a Simulated High-Voltage Lunar Power Transmission Line

    Science.gov (United States)

    Birchenough, Arthur; Hervol, David

    2008-01-01

    The Alternator Test Unit (ATU) in the Lunar Power System Facility (LPSF) located at the NASA Glenn Research Center (GRC) in Cleveland, Ohio was modified to simulate high-voltage transmission capability. The testbed simulated a 1 km transmission cable length from the ATU to the LPSF using resistors and inductors installed between the distribution transformers. Power factor correction circuitry was used to compensate for the reactance of the distribution system to improve the overall power factor. This test demonstrated that a permanent magnet alternator can successfully provide high-frequency ac power to a lunar facility located at a distance.

  5. Large scale renewable power generation advances in technologies for generation, transmission and storage

    CERN Document Server

    Hossain, Jahangir

    2014-01-01

    This book focuses on the issues of integrating large-scale renewable power generation into existing grids. The issues covered in this book include different types of renewable power generation along with their transmission and distribution, storage and protection. It also contains the development of medium voltage converters for step-up-transformer-less direct grid integration of renewable generation units, grid codes and resiliency analysis for large-scale renewable power generation, active power and frequency control and HVDC transmission. The emerging SMES technology for controlling and int

  6. The power supply system model of the process submersible device with AC power transmission over the cable-rope

    Science.gov (United States)

    Rulevskiy, V. M.; Bukreev, V. G.; Kuleshova, E. O.; Shandarova, E. B.; Shandarov, S. M.; Vasilyeva, Yu Z.

    2017-02-01

    A practical problem of power supply system modeling for the process submersible device with AC power transmission over the cable-rope was considered. The problem is highly relevant in developing and operation of submersible centrifugal pumps and submersibles. The results of modeling a symmetrical three-phase power supply system and their compliance with the real data are given at the paper. The obtained results in the mathematical and simulation models were similar.

  7. A novel power efficient location-based cooperative routing with transmission power-upper-limit for wireless sensor networks.

    Science.gov (United States)

    Shi, Juanfei; Calveras, Anna; Cheng, Ye; Liu, Kai

    2013-05-15

    The extensive usage of wireless sensor networks (WSNs) has led to the development of many power- and energy-efficient routing protocols. Cooperative routing in WSNs can improve performance in these types of networks. In this paper we discuss the existing proposals and we propose a routing algorithm for wireless sensor networks called Power Efficient Location-based Cooperative Routing with Transmission Power-upper-limit (PELCR-TP). The algorithm is based on the principle of minimum link power and aims to take advantage of nodes cooperation to make the link work well in WSNs with a low transmission power. In the proposed scheme, with a determined transmission power upper limit, nodes find the most appropriate next nodes and single-relay nodes with the proposed algorithm. Moreover, this proposal subtly avoids non-working nodes, because we add a Bad nodes Avoidance Strategy (BAS). Simulation results show that the proposed algorithm with BAS can significantly improve the performance in reducing the overall link power, enhancing the transmission success rate and decreasing the retransmission rate.

  8. Transmission Power Control using Small-Capacity UPFC under Output Voltage Saturation

    Science.gov (United States)

    Kuroda, Takeshi; Takeshita, Takaharu; Fujita, Hideki

    This paper presents a fast transmission power control scheme using a UPFC (Unified Power Flow Controller) under the output voltage saturation. For practical use of the UPFC, the fast and stable power response and the reduced power converter capacity are desired. The authors propose the fast and stable control scheme under the output voltage saturation of the reduced capacity UPFC. The effectiveness of the proposed control algorithm of the UPFC has been verified by experiments.

  9. Microwave power transmission system workshop, session on solid state

    Science.gov (United States)

    Finnell, W.

    1980-01-01

    The development of solid state technology for solar power satellite systems is briefly addressed. The economic advantages of solid state based systems are listed along with some conclusions and issues regarding specific design concepts.

  10. Environmental Assessment: Gulf Power Company Military Point Transmission Line Project

    Science.gov (United States)

    2014-05-12

    medium-sized mammals , a variety of reptilian and amphibian species, and a large diversity of water and terrestrial bird species (Tyndall AFB 1999...John Dingwall Project Manager 325th Civil Engineer Squadron 119 Alabama Avenue People Serving Peopfeu Re: Gulf Power Company Military Point...Force 3251h Civil Engineer Squadron 119 Alabama Avenue Tyndall AFB, FL 32403-5014 Dear Mr. Dingwall: I have revieweKI the proposal for Gulf Power

  11. Shortage management in power transmission networks; Engpassmanagement im Uebertragungsnetz

    Energy Technology Data Exchange (ETDEWEB)

    Brauner, G. [VDE, Inst. fuer Elektrische Anlagen und Energiewirtschaft an der Technischen Univ. Wien (Austria)

    2002-08-01

    Deregulation of the electricity market has raised co-ordination problems of power plant and network operation, which may lead to short-term power shortage. This danger is made even more acute by large-area power trading and a reluctance to make investments. Regionally balancing of power generation and sufficient 380 kW networks will make power supply more reliable. Measures to ensure short-term power shortage management by network operators are presented. [German] Die Deregulierung der Elektrizitaetswirtschaft hat zu einer Aufspaltung in die Geschaeftsbereiche Erzeugung, Uebertragung, Verteilung und Handel gefuehrt. Die Koordinierung des Kraftwerks- und Netzbetriebs ist hierdurch erschwert worden, was sich im Besonderen bei kurzfristigen Engpaessen bemerkbar macht. Der weitraeumigere Stromhandel und die deutliche Zurueckhaltung bei den Investitionen erhoeht zukuenftig die Gefahr von Engpaessen. Durch eine regional ausgeglichene Erzeugungsbilanz und ausreichend verstaerkte 380-kV-Netze ist auch zukuenftig eine sichere Versorgung moeglich. Insbesondere fuer das kurzfristige Engpassmanagement sollten die Netzbetreiber mit verbesserten Massnahmepaketen ausgestattet werden. (orig.)

  12. Grassroots Technological Resistance: The People's Power Project and the Impossible Dream of Wireless Transmission of Energy.

    Science.gov (United States)

    Schmidt, Pete

    2017-09-01

    In 1972, the Minnesota United Power Association (UPA) teamed up with the Minnesota Cooperative Power Association (CPA) to initiate an electrification project designed to bring power from North Dakota to the Twin Cities area. A significant backlash and protest began once farmers across the state became aware of the plan and the potential impending land seizure. In the midst of these actions, one group sought to create an alternative to the power line transmission system by designing a system of wireless energy transmission based on the plans of Nikola Tesla. This self-funded conglomeration of farmers and amateur researchers formed the People's Power Project (PPP) and set about building Tesla's system for the wireless transmission of energy. Using archival documents, this paper recounts this episode and argues that, in this case, the potential for successful grassroots action was derailed by the influence of longstanding myths about Tesla and his devices. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. POWER REFLECTION AND TRANSMISSION IN BEAM STRUCTURES CONTAINING A SEMI-INFINITE CRACK

    Institute of Scientific and Technical Information of China (English)

    Li Zhou; Wanchun Yuan

    2008-01-01

    Wave reflection and transmission in a beam containing a semi-infinite crack are studied analytically based on Timoshenko beam theory. Two kinds of crack surface conditions: non-contact (open) and fully contact (closed) cracks, are considered respectively for an isotropic beam. The analytical solution of reflection and transmission coefficients for a semi-infinite crack is obtained. The power reflection and transmission ratios depend on both the frequency and the position of the crack. Numerical results show the conservation of power transport. The transmitted energy among various wave modes is also investigated. A finite element method is used to verify the validity of the analytical results.

  14. Voith power transmission systems in diesel multiple units and railcars. A review on recent developments

    Energy Technology Data Exchange (ETDEWEB)

    Paetzold, W. [Voith Turbo GmbH und Co. KG, Heidenheim (Germany). Rail Div.

    1999-04-01

    Voith today offers complete transmission systems consisting of hydrodynamic and hydromechanical transmissions with integrated retarders, cardan shafts, final drives and cooling units. For DMUs with underfloor powerpacks, the hydrodynamic power transmission system currently is the pre-eminent drive system worldwide and meets the established standards for rail service, i.e. high availability, low operating costs and a reasonable purchasing price. In this article, the author describes Voith`s contribution to the further development of these transmission systems in several modern dieselhydraulic railcars and DMUs for regional and main-line operations. (orig.)

  15. Modelling the geographic distribution of wind power and the impact on transmission needs

    DEFF Research Database (Denmark)

    Østergaard, Poul Alberg

    2003-01-01

    Through energy systems modelling, transmission systems modelling and geographical modelling, the article examines the sensitivity of the response of the transmission system to the geographic distributions of wind power and in particular the sensitivity of the results to the accuracy...... of the distributed modelled. The results show that accuracy of the geographic modelling while important for the analysis of specific single transmission lines is not important for the analysis of the general response of the transmission system. The analyses thus corroborate previous analyses that demonstrated...

  16. Simulation Study on Coil Design of Wireless Power Transfer System for Optimal Transmission Efficiency

    Directory of Open Access Journals (Sweden)

    Hao Qiang

    2013-05-01

    Full Text Available As an emerging research field, Wireless Power Transfer (WPT has attracted wide spread attention recently. In this study, the coil design of WPT system for optimal transmission efficiency is investigated. We deduce Tthe design criteria are deduced to meet various conditions of transmission distance and load. The results of simulation and experiment show the transmission efficiency from transmitting coil to receiving coil can keep high when the corresponding optimal condition is achieved. Thusen it can improve the overall transmission efficiency of the WPT system and it makes it suitable for the practical application of WPT system.

  17. Wireless Power Transmission Technology State-Of-The-Art

    Science.gov (United States)

    Dickinson, R. M. T.

    2002-01-01

    This first Bill Brown SSP La Crescenta, CA 91214 technology , including microwave and laser systems for the transfer of electric , as related to eventually developing Space Solar Power (SSP) systems. Current and past technology accomplishments in ground based and air and space applied energy conversion devices, systems and modeling performance and cost information is presented, where such data are known to the author. The purpose of the presentation is to discuss and present data to encourage documenting and breaking the current technology records, so as to advance the SOA in WPT for SSP . For example, regarding DC to RF and laser converters, 83% efficient 2.45 GHz cooker-tube magnetrons with 800W CW output have been jointly developed by Russia and US. Over 50% wa11-plug efficient 1.5 kW/cm2 CW, water cooled, multibeam, solid state laser diode bar-arrays have been developed by LLNL at 808 nm wavelength. The Gennans have developed a 36% efficient, kW level, sing1e coherent beam, lateral pumped semiconductor laser. The record for end-to-end DC input to DC output power overall WPT link conversion efficiency is 54% during the Raytheon-JPL experiments in 1975 for 495.6 W recovered at 1.7-mrange at 2.4469 GAz. The record for usefully recovered electric power output ( as contrasted with thennally induced power in structures) is 34 kW OC output at a range of 1.55 km, using 2.388 GHz microwaves, during the JPL- Raytheon experiments by Bill Brown and the author at Goldstone, CA in 1975. The GaAs-diode rectenna array had an average collection-conversion efficiency of 82.5%. A single rectenna element operating a 6W RF input, developed by Bill Brown demonstrated 91.4% efficiency. The comparable record for laser light to OC output power conversion efficiency of photovoltaics is 590/0. for AlGaAs at 1.7 Wand 826nm wavelength. Russian cyclotron-wave converters have demonstrated 80% rectification efficiency at S-band. Concerning WPT technology equipment costs, magnetron conversion

  18. Smart Grid Network Transmission Line RLC Modelling Using Random Power Line Synthesis Scheme

    Directory of Open Access Journals (Sweden)

    Ezennaya S.O

    2013-07-01

    Full Text Available This work proposes Random Power line Synthesis (RPLS as a quicker computational approach to solving RLC parameters of a modern smart grid transmission network. Since modern grid systems provide a holistic perspective of modern grid development, it is obvious that a transmission network that is ageing cannot serve the expanded load demand. The need to revoltionalize the traditional transmission model while exploiting basic electrical theories and principles in Smart Grid (SG architecture necessitated this paper. This work seeks to address the RLC parameter modelling for SG template to provision dynamic power in Nigerian context. Other schemes of transmission RLC modelling were studied as well as outlining their limitations. Consequently, we then proposed a fuzzy smart grid framework for RLC computation and developed a proposed SG overhead transmission line from its conductor characteristics and tower geometry considering the RLC parameters of the conductor while applying RPLS to generate the parameter metrics.

  19. Power Supply Reliability Assessment in UPFC-installed Transmission System for ATC Enhancement Considering Transient Stability

    Science.gov (United States)

    Masuta, Taisuke; Yokoyama, Akihiko

    With recent development of power electronics technology, power system stability enhancement and optimal power flow control by using Flexible AC Transmission System (FACTS) devices have so far been studied. The FACTS devices to relieve multiple constraints can also make it possible to enhance Available Transfer Capability (ATC) without construction of new transmission lines. The previous research revealed that ATC is expanded by avoiding multiple constraints in OPF using Unified Power Flow Controller (UPFC). For long-term operation of such ATC-expanded power system, it is necessary to evaluate power system reliability. In this paper, the evaluation method of supply reliability for UPFC-installed power system is proposed. Both thermal capacity and transient stability constraints are considered. The effectiveness of the proposed method is shown by numerical examples for IEEJ East10-machine test system.

  20. Advanced Receiver/Converter Experiments for Laser Wireless Power Transmission

    Science.gov (United States)

    Howell, Joe T.; ONeill, Mark; Fork, Richard

    2004-01-01

    For several years NASA Marshall Space Flight Center, UAH and ENTECH have been working on various aspects of space solar power systems. The current activity was just begun in January 2004 to further develop this new photovoltaic concentrator laser receiver/converter technology. During the next few months, an improved prototype will be designed, fabricated, and thoroughly tested under laser illumination. The final paper will describe the new concept, present its advantages over other laser receiver/converter approaches (including planar photovoltaic arrays), and provide the latest experiment results on prototype hardware (including the effects of laser irradiance level and cell temperature). With NASA's new human exploration plans to first return to the Moon, and then to proceed to Mars, the new photovoltaic concentrator laser receiver/converter technology could prove to be extremely useful in providing power to the landing sites and other phases of the missions. For example, to explore the scientifically interesting and likely resource-rich poles of the Moon (which may contain water) or the poles of Mars (which definitely contain water and carbon dioxide), laser power beaming could represent the simplest means of providing power to these regions, which receive little or no sunlight, making solar arrays useless there. In summary, the authors propose a paper on definition and experimental results of a novel photovoltaic concentrator approach for collecting and converting laser radiation to electrical power. The new advanced photovoltaic concentrator laser receiver/converter offers higher performance, lighter weight, and lower cost than competing concepts, and early experimental results are confirming the expected excellent Performance levels. After the small prototypes are successfully demonstrated, a larger array with even better performance is planned for the next phase experiments and demonstrations. Thereafter, a near-term flight experiment of the new technology

  1. Diagnostics of power transmissions system with tooth gear

    Directory of Open Access Journals (Sweden)

    Grzegorz WOJNAR

    2008-01-01

    Full Text Available This paper presents results of laboratory tests that were aimed at detecting early stages of various faults in toothed wheels by measurement and analysis of transverse vibration speed of the transmission gear shafts. In experimental investigation, cracking of the root tooth and chipping of the tooth were detected. The laser vibrometer Ometron VH300+ was used for non-contact measurement of shaft transversal vibration speed. Gear vibrations were recorded in selected points of gear housing and gear shafts at different speeds and gear loads. Results were analyzed and compared but in this paper is presented only selected examples. This paper shows that on the basis of the transverse vibration speed of transmission gear shafts, it is possible to detect defects at an earlier stage than on the basis of the housing vibration accelerations. In the case of measuring gear shaft vibration velocity, the way of the signal generated by the defect of a gear wheel (or bearing is shortened as well as the influence of composed transmittance of the bearing-gear housing system is eliminated. WV time-frequency analysis and complex continuous wavelet transformations were used for detection. The authors introduced a measure of local tooth damage, which was proportional to the size of damage. The results of research presented in this paperconfirmed that the defect's measure is very sensitive to the development of teeth faults.

  2. Adaptive low-power listening MAC protocol based on transmission rates.

    Science.gov (United States)

    Hwang, Kwang-il; Yi, Gangman

    2014-01-01

    Even though existing low-power listening (LPL) protocols have enabled ultra-low-power operation in wireless sensor networks (WSN), they do not address trade-off between energy and delay, since they focused only on energy aspect. However, in recent years, a growing interest in various WSN applications is requiring new design factors, such as minimum delay and higher reliability, as well as energy efficiency. Therefore, in this paper we propose a novel sensor multiple access control (MAC) protocol, transmission rate based adaptive low-power listening MAC protocol (TRA-MAC), which is a kind of preamble-based LPL but is capable of controlling preamble sensing cycle adaptively to transmission rates. Through experiments, it is demonstrated that TRA-MAC enables LPL cycle (LC) and preamble transmission length to adapt dynamically to varying transmission rates, compensating trade-off between energy and response time.

  3. In-situ estimation of structural power transmission from machinery source installations

    DEFF Research Database (Denmark)

    Ohlrich, Mogens

    1999-01-01

    There is continued work on developing methods for characterising structureborne sound sources and for predicting the transmission of structural power into source foundations and receiving structures. However, at present there is no agreed measurement method by which such transmission predictions...... are assessed and validated. This fundamental problem is addressed herein and a reference method is proposed for measuring power transmission ‘in-situ'. The method is founded on a relatively simple structural power calibration of the source environment (receiving structure), which is done before the source...... is installed. Moreover, it is shown that an approximate transmission estimate can be obtained with the source presence, provided that either the source or receiver mobility is known a priori for a single mounting terminal. This is tested for a number of complex source-receiver arrangements and the frequency...

  4. Multilink DC Transmission for Offshore Wind Power Integration

    DEFF Research Database (Denmark)

    Craciun, Bogdan-Ionut; Silva, Rodrigo Da; Teodorescu, Remus;

    2012-01-01

    The High Voltage Direct Current (HVDC) system gains much more flexibility on a basis of multi terminal operation. Having extra converters brings also new ideas in sharing the active power and one of the solutions is the use of virtual impedance correlated with a droop controller. This paper analy...

  5. Electrical Collection and Transmission Systems for Offshore Wind Power: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Green, J.; Bowen, A.; Fingersh, L.J.; Wan, Y.

    2007-03-01

    The electrical systems needed for offshore wind farms to collect power from wind turbines--and transmit it to shore--will be a significant cost element of these systems. This paper describes the development of a simplified model of the cost and performance of such systems.

  6. The effect of the transmission grid on market power

    Energy Technology Data Exchange (ETDEWEB)

    Stoft, S.

    1997-05-01

    If competition could extend without hindrance through the entire extent of an electrically connected power grid, the US would have just two electricity markets, each with a uniform price. These markets would be competitive indeed. Unfortunately, losses and congestion present barriers to competition and thereby provide the likelihood of significantly increased market power. This paper begins the analysis of congestion as it affects the physical extent of markets and thereby affects the degree of market power. This is new territory; very little has previously been written in this area. Although the theoretical developments reported here rely on complex economic analysis, and although the market behaviors described are extremely subtle, several broad generalizations relevant to policy analysis can be made. From these generalizations one major policy conclusion can be drawn: In an unregulated market it will be socially beneficial to build a grid that is more robust than what is optimal in a regulated environment. Unused capacity may be needed. For a line to support full competition it may need to have a capacity that is much greater than the flow that will take place on it under full competition. Markets do not have sharp boundaries. Even with only one line the two busses may be in different regions, the same region, or partially in each other`s region. Increasing capacity is more effective on a small line. If connecting two busses with a very strong line will reduce market power, then the first MW of connecting capacity will have the most impact and each additional MW will have less. A congested line will cut a market into two non-competing regions. In each region the generators will markup according to the elasticity of the demand in only their region. A generator may reduce output in order to congest a line and increase its market power.

  7. 77 FR 10489 - Xcel Energy Services Inc., Northern States Power Company v. American Transmission Company, LLC...

    Science.gov (United States)

    2012-02-22

    ... Energy Regulatory Commission Xcel Energy Services Inc., Northern States Power Company v. American Transmission Company, LLC; Notice of Complaint Take notice that on February 14, 2012, pursuant to section 206 of the Federal Power Act and Rule 206 of the Rules of Practice and Procedure of the Federal...

  8. 78 FR 35017 - Prairie Power, Inc. v. Ameren Services Company, Ameren Illinois Company, Ameren Transmission...

    Science.gov (United States)

    2013-06-11

    ... Energy Regulatory Commission Prairie Power, Inc. v. Ameren Services Company, Ameren Illinois Company, Ameren Transmission Company of Illinois; Notice of Complaint Take notice that on May 31, 2013, pursuant to section 206 of the Federal Power Act (FPA), 16 USC 825(e) and Rule 206 of the Federal...

  9. Autonomous transmission power adaptation for multi-radio multi-channel wireless mesh networks

    CSIR Research Space (South Africa)

    Olwal, TO

    2008-09-01

    Full Text Available Multi-Radio Multi-Channel (MRMC) systems are key to power control problems in WMNs. Previous studies have emphasized throughput maximization in such systems as the main design challenge and transmission power control treated as a secondary issue...

  10. Autonomous transmission power adaptation for multi-radio multi-channel wireless mesh networks

    CSIR Research Space (South Africa)

    Olwal, TO

    2009-09-01

    Full Text Available Multi-Radio Multi-Channel (MRMC) systems are key to power control problems in WMNs. Previous studies have emphasized through- put maximization in such systems as the main design challenge and transmission power control treated as a secondary issue...

  11. Vegetation clearance distances to prevent wildland fire caused damage to telecommunication and power transmission infrastructure (2)

    Science.gov (United States)

    B. W. Butler; T. Wallace; J. Hogge

    2015-01-01

    Towers and poles supporting power transmission and telecommunication lines have collapsed due to heating from wildland fires. Such occurrences have led to interruptions in power or communication in large municipal areas with associated social and political implications as well as increased immediate danger to humans. Vegetation clearance standards for overhead...

  12. Vegetation clearance distances to prevent wildland fire caused damage to telecommunication and power transmission infrastructure

    Science.gov (United States)

    B. W. Butler; J. Webb; J. Hogge; T. Wallace

    2015-01-01

    Towers and poles supporting power transmission and telecommunication lines have collapsed due to heating from wildland fires. Such occurrences have led to interruptions in power or communication in large municipal areas with associated social and political implications as well as increased immediate danger to humans. Unfortunately, no studies address the question of...

  13. Transmission Power Measurements for Wireless Sensor Nodes and their Relationship to the Battery Level

    NARCIS (Netherlands)

    Blom, S.; Bellettini, C.; Sinigalliesi, A.; Stabellini, L.; Rossi, M.; Mazzini, G.

    2005-01-01

    In this work we focus on the new generation EYESIFXv2 [1] wireless sensor nodes by carrying out experimental measurements on power related quantities. In particular, our aim is to characterize the relationship between the level of the battery and the transmission power radiated by the node. The pres

  14. Offshore grid transmission planning using approximated HVDC power flows

    Energy Technology Data Exchange (ETDEWEB)

    Torbaghan, Shahab Shariat; Rawn, Barry G.; Gibescu, Madeleine; Meijden, Mart van der [Delft Univ. of Technology (Netherlands). Dept. of Electrical Sustainable Energy

    2012-07-01

    In this paper we introduce an optimization framework which determines a socially optimum design of a HVDC offshore grid, under the assumption of a centralized network expansion planning scheme. This gives the optimum grid topology and interconnections capacity. In addition, the analytical solution to the optimization problem yields a market structure that expresses the relationship between the different regions' electricity prices and congestion charges associated with the interconnections. The optimization model sets the transmission capacities in a way that congestion shadow prices to be collected by the end of the economic lifetime of the project pay off the initial investment capital. We use this framework to study the impact of exercising different dispatching policies on the optimum design of the grid. The framework is applied to a multi-bus test system that functions under 8 different time periods. (orig.)

  15. A modular restoration tower for electric power line transmission

    Energy Technology Data Exchange (ETDEWEB)

    Nicolazzi, L.C.; Pereira, J.C.; Leonel, C.E.L.; Rocha, G.B.; Bianchezzi, V.; Mendes, F. [Universidade Federal Santa Catarina (UFSC), Florianopolis, SC (Brazil). Dept. de Engenharia Mecanica], Emails: lauro@grante.ufsc.br, jcarlos@grante.ufsc.br; Luz, R.L. [ELETROSUL Centrais Eletricas S.A., Florianopolis, SC (Brazil)], Email: rluz@eletrosul.gov.br

    2009-07-01

    The main target of this R and D project is to develop an restoration tower for electric energy lines transmission. Whereas these towers should present the main features like transport facility, easiest assembling associated with a low cost of manufacture, it was applied the single-column tower concepts supported by stays, modularized, framed and articulated at the base. The concepts used for this development was a design methodology. From the different definition situations of load, numerical models have been developed focusing the design to the best of structural element arrangements of its modules. Then, tests were performed in laboratory to determine the module structural performance for different work load situations. These tests served to identify inconsistencies in the numerical models and proposed adjustments in its design to improve its performance on the strength and stability. (author)

  16. Transmission Power Level Selection Method Based On Binary Search Algorithm for HiLOW

    Directory of Open Access Journals (Sweden)

    Lingeswari V Chandra

    2011-05-01

    Full Text Available Recently the sensor communication research has introduced an IP-based communication known as 6LoWPAN to sensor network. 6LoWPAN was introduced to give a new perspective to sensor network by enabling IPv6 to be applied to wireless sensors as well as wired sensor. Dedicated routing protocols based on 6LoWPAN was soon introduced and Hierarchical Routing Protocol for 6LoWPAN (HiLOW is one of them. HiLOW clearly defines the routing tree setup process, address allocation technique and the data routing process but there is some shortcomings in terms of transmission power selection. HiLOW does not highlight how the suitable transmission power is being selected for sensor communication purpose and this leads to the assumption that at all time and all scenarios the sensors are using maximum transmission power. In the case the sensors are using maximum transmission power for communication even when it is not necessary then power depletion for sensors will be amplified and the network lifetime will be significantly reduced. In this paper we present a brief introduction to 6LoWPAN, a concise review on HiLOW, a highlight on issues revolving each process in HiLOW and propose a new idea on transmission power selection method for HiLOW.

  17. Overview of FACTS devices for wind power plants directly connected to the transmission network

    DEFF Research Database (Denmark)

    Adamczyk, Andrzej Grzegorz; Teodorescu, Remus; Rodriguez, Pedro;

    2010-01-01

    of the electrical network with high wind energy penetration might be compromised. For this reason transmission system operators (TSO) impose more stringent connection requirements on the wind power plant (WPP) owners. On the other hand flexible AC transmission systems (FACTS) devices offer enhancement of grid......Growing number of wind turbines is changing electricity generation profile all over the world. This brings challenges for power system operation, which was designed and developed around conventional power plants with directly coupled synchronous generators. In result, safety and stability...... research in FACTS applicability for WPPs is summarized. Examples of few existing FACTS applications for wind farms are given....

  18. Optimal Placement of Unified Power Flow Controllers : An Approach to Maximize the Loadability of Transmission Lines

    Directory of Open Access Journals (Sweden)

    S. T. Jaya Christa

    2006-06-01

    Full Text Available This paper deals with the optimal location and parameters of Unified Power Flow Controllers (UPFCs in electrical power systems, using particle swarm optimization (PSO. The objective is to maximize the transmission system loadability subject to the transmission line capacity limits and specified bus voltage levels. Using the proposed method, the location of UPFCs and their parameters are optimized simultaneously. PSO is used to solve the above non-linear programming problem for better accuracy. The proposed approach is examined and tested on IEEE 30-bus system and IEEE 118-bus system. The results obtained are quite promising for the power system operation environment

  19. Impact of Improved Solar Forecasts on Bulk Power System Operations in ISO-NE: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Brancucci Martinez-Anido, C.; Florita, A.; Hodge, B. M.

    2014-09-01

    The diurnal nature of solar power is made uncertain by variable cloud cover and the influence of atmospheric conditions on irradiance scattering processes. Its forecasting has become increasingly important to the unit commitment and dispatch process for efficient scheduling of generators in power system operations. This study examines the value of improved solar power forecasting for the Independent System Operator-New England system. The results show how 25% solar power penetration reduces net electricity generation costs by 22.9%.

  20. An efficient transmission power control scheme for temperature variation in wireless sensor networks.

    Science.gov (United States)

    Lee, Jungwook; Chung, Kwangsue

    2011-01-01

    Wireless sensor networks collect data from several nodes dispersed at remote sites. Sensor nodes can be installed in harsh environments such as deserts, cities, and indoors, where the link quality changes considerably over time. Particularly, changes in transmission power may be caused by temperature, humidity, and other factors. In order to compensate for link quality changes, existing schemes detect the link quality changes between nodes and control transmission power through a series of feedback processes, but these approaches can cause heavy overhead with the additional control packets needed. In this paper, the change of the link quality according to temperature is examined through empirical experimentation. A new power control scheme combining both temperature-aware link quality compensation and a closed-loop feedback process to adapt to link quality changes is proposed. We prove that the proposed scheme effectively adapts the transmission power to the changing link quality with less control overhead and energy consumption.

  1. An Efficient Transmission Power Control Scheme for Temperature Variation in Wireless Sensor Networks

    Science.gov (United States)

    Lee, Jungwook; Chung, Kwangsue

    2011-01-01

    Wireless sensor networks collect data from several nodes dispersed at remote sites. Sensor nodes can be installed in harsh environments such as deserts, cities, and indoors, where the link quality changes considerably over time. Particularly, changes in transmission power may be caused by temperature, humidity, and other factors. In order to compensate for link quality changes, existing schemes detect the link quality changes between nodes and control transmission power through a series of feedback processes, but these approaches can cause heavy overhead with the additional control packets needed. In this paper, the change of the link quality according to temperature is examined through empirical experimentation. A new power control scheme combining both temperature-aware link quality compensation and a closed-loop feedback process to adapt to link quality changes is proposed. We prove that the proposed scheme effectively adapts the transmission power to the changing link quality with less control overhead and energy consumption. PMID:22163787

  2. Adaptive discrete rate and power transmission for spectrum sharing systems

    KAUST Repository

    Abdallah, Mohamed M.

    2012-04-01

    In this paper we develop a framework for optimizing the performance of the secondary link in terms of the average spectral efficiency assuming quantized channel state information (CSI) of the secondary and the secondary-to-primary interference channels available at the secondary transmitter. We consider the problem under the constraints of maximum average interference power levels at the primary receiver. We develop a sub-optimal computationally efficient iterative algorithm for finding the optimal CSI quantizers as well as the discrete power and rate employed at the cognitive transmitter for each quantized CSI level so as to maximize the average spectral efficiency. We show via analysis and simulations that the proposed algorithm converges for Rayleigh fading channels. Our numerical results give the number of bits required to sufficiently represent the CSI to achieve almost the maximum average spectral efficiency attained using full knowledge of the CSI. © 2012 IEEE.

  3. Architecture Analysis of Wireless Power Transmission for Lunar Outposts

    Science.gov (United States)

    2015-09-01

    long history of both theoretical and material origin, as Max Plank formulated the underlying idea that light was just another form of electromagnetic...understand their impact on the solar power satellite architecture. The laser has a long history of both theoretical and material origin, when Max Plank ...NY: Lawrence Livermore National Laboratory. 98 Kare, Jordin T., and Kevin LG Parkin. 2006. “A Comparison of Laser and Microwave Approaches to

  4. Progress in Acoustic Transmission of Power through Walls

    Science.gov (United States)

    Sherrit,Stewart; Coty, Benjamin; Bao, Xiaoqi; Bar-Cohen, Yoseph; Badescu, Mircea; Chang, Zensheu

    2008-01-01

    A document presents updated information on implementation of the wireless acoustic-electric feed-through (WAEF) concept, which was reported in Using Piezoelectric Devices To Transmit Power Through Walls (NPO-41157), NASA Tech Briefs, Vol. 32, No. 6 (June 2008), page 70. To recapitulate: In a basic WAEF setup, a transmitting piezoelectric transducer on one side of a wall is driven at resonance to excite ultrasonic vibrations in the wall. A receiving piezoelectric transducer on the opposite side of the wall converts the vibrations back to an ultrasonic AC electric signal, which is then detected and otherwise processed in a manner that depends on the modulation (if any) applied to the signal and whether the signal is used to transmit power, data, or both. The present document expands upon the previous information concerning underlying physical principles, advantages, and potential applications of WAEF. It discusses the design and construction of breadboard prototype piezoelectric transducers for WAEF. It goes on to present results of computational simulations of performance and results of laboratory tests of the prototypes. In one notable test, a 100-W light bulb was lit by WAEF to demonstrate the feasibility of powering a realistic load.

  5. A new physical insight of RESURF effects based on gradual charge appointment concept for bulk silicon lateral power devices

    Science.gov (United States)

    Zhang, Jun; Guo, Yu-Feng; Sun, Yabin; Yang, Kemeng; Lin, Hong; Xia, Xiaojuan; Zhang, Changchun

    2016-04-01

    A novel gradual charge appointment concept is proposed to provide a clear physical insight of RESURF effects in bulk silicon lateral power devices. Due to the expandable substrate depletion region in silicon power device, the Linearly Graded Approximation is unable to fully describe the 2-D coupling effects between vertical and lateral junction. In this paper, by defining a charge appointment line, the lateral abrupt junction behaves as an effective gradual junction, thus resulting in the wider depletion layer, lower field peak and higher breakdown voltage. Based on the hypothesis, a simple 1-D model is proposed to quantify the breakdown voltage of the bulk silicon RESURF device and formulize the surface electric field. To our knowledge, the proposed model is the first 1-D model for bulk silicon RESURF device which can accurately describe the surface field profiles under various applied voltages and structure parameters. Furthermore, we provide a new RESURF criterion to explore the sensitivity of the breakdown voltage to structure parameters. Fair agreements among the analytical, numerical and experimental results verify the availability of the proposed concept and model.

  6. Effect of Tooth Profile Modification on Vibration of Power Split Gear Transmission System

    Institute of Scientific and Technical Information of China (English)

    He Lin

    2016-01-01

    Based on Newton's second law, the bend⁃torsion⁃shaft coupling nonlinear dynamic model and equations of power split gear transmission system are established. According to the principle of tooth profile modification, the tooth profile modification is considered as time⁃varying gear backlash function acting along the line of action. Then the dynamic functions are solved by using Runge⁃Kutta numerical method. After analyzing the effect of tooth profile modification quantity( TPMQ) and relative tooth profile modification length( TPML) to the nonlinear dynamic characteristics of power split gear transmission, the following conclusions are drawn:①The TPMQ of a certain stage transmission affects the vibration of its own stage more significantly than the other stage, and the coupling effect between two stages can be ignored usually in the modification design;②If the first stage TPMLs are less than 0.3, the influence of the first stage TPMLs to the first stage transmission vibration is much more greatly than the influence of the second stage TPMLs to the first stage transmission vibration, or else both the first and second stage TPMLs affect the first stage transmission vibration largely. The same is true for the second stage TPMLs, and the cutoff value is 0. 2; ③The TPMQ affects the vibration of power split gear transmission system more principally than the TPML, and should be top⁃priority in the modification design.

  7. Performance evaluation of MAC transmission power control in wireless sensor networks.

    OpenAIRE

    Egea López, Estebán

    2007-01-01

    In this paper we provide a method to analytically compute the energy saving provided by the use of Transmission Power Control (TPC) at the MAC layer in Wireless Sensor Networks (WSN). We consider a classical TPC mechanism: data packets are transmitted with the minimum required power to achieve a given packet error probability, whereas the additional MAC control packets are transmitted with the nominal (maximum) power. This scheme has been chosen because it does not modify the network to...

  8. Optical fiber cable for transmission of high power laser energy over great distances

    Science.gov (United States)

    Zediker, Mark S.; Rinzler, Charles C.; Faircloth, Brian O.; Moxley, Joel F.; Koblick, Yeshaya

    2016-05-24

    There is provided a system and apparatus for the transmission of high power laser energy over great distances without substantial power loss and without the presence of stimulated Raman scattering. There is further provided systems and optical fiber cable configurations and optical fiber structures for the delivering high power laser energy over great distances to a tool or surface to perform an operation or work with the tool or upon the surface.

  9. Optical fiber cable for transmission of high power laser energy over great distances

    Energy Technology Data Exchange (ETDEWEB)

    Zediker, Mark S.; Rinzler, Charles C.; Faircloth, Brian O.; Moxley, Joel F.; Koblick, Yeshaya

    2016-05-24

    There is provided a system and apparatus for the transmission of high power laser energy over great distances without substantial power loss and without the presence of stimulated Raman scattering. There is further provided systems and optical fiber cable configurations and optical fiber structures for the delivering high power laser energy over great distances to a tool or surface to perform an operation or work with the tool or upon the surface.

  10. Through-Metal-Wall Power Delivery and Data Transmission for Enclosed Sensors: A Review.

    Science.gov (United States)

    Yang, Ding-Xin; Hu, Zheng; Zhao, Hong; Hu, Hai-Feng; Sun, Yun-Zhe; Hou, Bao-Jian

    2015-12-15

    The aim of this review was to assess the current viable technologies for wireless power delivery and data transmission through metal barriers. Using such technologies sensors enclosed in hermetical metal containers can be powered and communicate through exterior power sources without penetration of the metal wall for wire feed-throughs. In this review, we first discuss the significant and essential requirements for through-metal-wall power delivery and data transmission and then we: (1) describe three electromagnetic coupling based techniques reported in the literature, which include inductive coupling, capacitive coupling, and magnetic resonance coupling; (2) present a detailed review of wireless ultrasonic through-metal-wall power delivery and/or data transmission methods; (3) compare various ultrasonic through-metal-wall systems in modeling, transducer configuration and communication mode with sensors; (4) summarize the characteristics of electromagnetic-based and ultrasound-based systems, evaluate the challenges and development trends. We conclude that electromagnetic coupling methods are suitable for through thin non-ferromagnetic metal wall power delivery and data transmission at a relatively low data rate; piezoelectric transducer-based ultrasonic systems are particularly advantageous in achieving high power transfer efficiency and high data rates; the combination of more than one single technique may provide a more practical and reliable solution for long term operation.

  11. Through-Metal-Wall Power Delivery and Data Transmission for Enclosed Sensors: A Review

    Directory of Open Access Journals (Sweden)

    Ding-Xin Yang

    2015-12-01

    Full Text Available The aim of this review was to assess the current viable technologies for wireless power delivery and data transmission through metal barriers. Using such technologies sensors enclosed in hermetical metal containers can be powered and communicate through exterior power sources without penetration of the metal wall for wire feed-throughs. In this review, we first discuss the significant and essential requirements for through-metal-wall power delivery and data transmission and then we: (1 describe three electromagnetic coupling based techniques reported in the literature, which include inductive coupling, capacitive coupling, and magnetic resonance coupling; (2 present a detailed review of wireless ultrasonic through-metal-wall power delivery and/or data transmission methods; (3 compare various ultrasonic through-metal-wall systems in modeling, transducer configuration and communication mode with sensors; (4 summarize the characteristics of electromagnetic-based and ultrasound-based systems, evaluate the challenges and development trends. We conclude that electromagnetic coupling methods are suitable for through thin non-ferromagnetic metal wall power delivery and data transmission at a relatively low data rate; piezoelectric transducer-based ultrasonic systems are particularly advantageous in achieving high power transfer efficiency and high data rates; the combination of more than one single technique may provide a more practical and reliable solution for long term operation.

  12. 3D Power Line Reconstruction from Airborne LiDAR Point Cloud of Overhead Electric Power Transmission Corridors

    Directory of Open Access Journals (Sweden)

    LIN Xiangguo

    2016-03-01

    Full Text Available 3D power line reconstruction is one of the main tasks in power line patrols using LiDAR systems mounted on helicopters. A 3D reconstruction method is proposed to reconstruct the power lines from the airborne LiDAR point clouds of the overhead electric power transmission corridors. Firstly, the pylons' LiDAR points and the initial routine trajectory of the transmission lines are employed to derive the precise information such as the locations and number of the pylons, the real routine trajectory, and the total number of spans. Secondly, the power line corridor is divided into a number of spans, the scope of each span in the XOY plane is determined, and the powerline LiDAR points are allocated into the corresponding spans where they are located. Thirdly, the powerline points of each span are clustered by the k-means algorithm in a normalized projection space, and each cluster corresponds to one power line. Finally, each power line is reconstructed based on a combination of a line model and a parabola model. Two experiments suggest that the proposed method is capable of automatically and correctly reconstructing 3D models of the long power lines with high accuracy. Moreover, it is robust to many factors such as the changing number, types, arrangements, blunders of the power lines, the changing length of the spans, and the irregular breakage of the LiDAR point clouds.

  13. Low-power chip-level optical interconnects based on bulk-silicon single-chip photonic transceivers

    Science.gov (United States)

    Kim, Gyungock; Park, Hyundai; Joo, Jiho; Jang, Ki-Seok; Kwack, Myung-Joon; Kim, Sanghoon; Kim, In Gyoo; Kim, Sun Ae; Oh, Jin Hyuk; Park, Jaegyu; Kim, Sanggi

    2016-03-01

    We present new scheme for chip-level photonic I/Os, based on monolithically integrated vertical photonic devices on bulk silicon, which increases the integration level of PICs to a complete photonic transceiver (TRx) including chip-level light source. A prototype of the single-chip photonic TRx based on a bulk silicon substrate demonstrated 20 Gb/s low power chip-level optical interconnects between fabricated chips, proving that this scheme can offer compact low-cost chip-level I/O solutions and have a significant impact on practical electronic-photonic integration in high performance computers (HPC), cpu-memory interface, 3D-IC, and LAN/SAN/data-center and network applications.

  14. Electrical power transmission and distribution aging and life extension techniques

    CERN Document Server

    Chudnovsky, Bella H

    2012-01-01

    ""The focus of this unique reference book is four critical areas in the manufacturing of power distribution components. These areas are plating, lubrication, insulator failure, and maintenance. ... The many SEM images, x-ray studies, photos, and tabular data make for a very convenient reference source for diagnosing plating problems. ... Examples often help to drive home a point, and many case studies illustrating the various failure modes described throughout the book are included. These could prove to be an invaluable source of information when trying to diagnose unknown field failures. ...

  15. Wireless power transmission for biomedical implants: The role of near-zero threshold CMOS rectifiers.

    Science.gov (United States)

    Mohammadi, Ali; Redoute, Jean-Michel; Yuce, Mehmet R

    2015-01-01

    Biomedical implants require an electronic power conditioning circuitry to provide a stable electrical power supply. The efficiency of wireless power transmission is strongly dependent on the power conditioning circuitry specifically the rectifier. A cross-connected CMOS bridge rectifier is implemented to demonstrate the impact of thresholds of rectifiers on wireless power transfer. The performance of the proposed rectifier is experimentally compared with a conventional Schottky diode full wave rectifier over 9 cm distance of air and tissue medium between the transmitter and receiver. The output voltage generated by the CMOS rectifier across a 1 KΩ resistive load is around twice as much as the Schottky rectifier.

  16. Power consumption analysis of constant bit rate video transmission over 3G networks

    DEFF Research Database (Denmark)

    Ukhanova, Ann; Belyaev, Evgeny; Wang, Le

    2012-01-01

    for the 3GPP transition state machine that allows to decrease power consumption on a mobile device taking signaling traffic, buffer size and latency restrictions into account. Furthermore, we discuss the gain in power consumption vs. PSNR for transmitted video and show the possibility of performing power......This paper presents an analysis of the power consumption of video data transmission with constant bit rate over 3G mobile wireless networks. The work includes the description of the radio resource control transition state machine in 3G networks, followed by a detailed power consumption analysis...... consumption management based on the requirements for the video quality....

  17. 77 FR 24950 - Meeting Related to the Transmission Planning Activities of the Southwest Power Pool, Inc.; Notice...

    Science.gov (United States)

    2012-04-26

    ... transmission planning activities of the Southwest Power Pool, Inc. (SPP): Strategic Planning Committee Task... Independent Transmission System Operator, Inc. Docket No. ER11-3967-002, Southwest Power Pool, Inc. Docket No... Energy Regulatory Commission Meeting Related to the Transmission Planning Activities of the...

  18. Power Transmission Scheduling for Generators in a Deregulated Environment Based on a Game-Theoretic Approach

    Directory of Open Access Journals (Sweden)

    Bingtuan Gao

    2015-12-01

    Full Text Available In a deregulated environment of the power market, in order to lower their energy price and guarantee the stability of the power network, appropriate transmission lines have to be considered for electricity generators to sell their energy to the end users. This paper proposes a game-theoretic power transmission scheduling for multiple generators to lower their wheeling cost. Based on the embedded cost method, a wheeling cost model consisting of congestion cost, cost of losses and cost of transmission capacity is presented. By assuming each generator behaves in a selfish and rational way, the competition among the multiple generators is formulated as a non-cooperative game, where the players are the generators and the strategies are their daily schedules of power transmission. We will prove that there exists at least one pure-strategy Nash equilibrium of the formulated power transmission game. Moreover, a distributed algorithm will be provided to realize the optimization in terms of minimizing the wheeling cost. Finally, simulations were performed and discussed to verify the feasibility and effectiveness of the proposed non-cooperative game approach for the generators in a deregulated environment.

  19. High-resolution transmission electron microscopy and bulk magnetometry study of LaFe_(11.5)Si_(1.5) compound

    Institute of Scientific and Technical Information of China (English)

    Zou Jun-Ding; Li Wei; Shen Bao-Gen

    2009-01-01

    This paper studies the microstructural and magnetic properties of LaFe_(11.5)Si_(1.5) compound by means of high-resolution transmission electron microscope and bulk magnetometry measurements. The crystalline structure is accompanied with the noncrystalline and nanocrystalline structures. This characteristic is the reflection of the crystalline process held by quenching. The inverse susceptibilities diverge and deviate from Curie-Weiss law under low applied magnetic fields. This paper proposes the possible mechanism between the anomalous susceptibilities and microstructtire, and offers a perspective on the magnetic properties of metastable intermetallic compounds.

  20. Ultra-Low-Voltage Low-Power Bulk-Driven Quasi-Floating-Gate Operational Transconductance Amplifier

    Directory of Open Access Journals (Sweden)

    Ziad Alsibai

    2014-01-01

    Full Text Available A new ultra-low-voltage (LV low-power (LP bulk-driven quasi-floating-gate (BD-QFG operational transconductance amplifier (OTA is presented in this paper. The proposed circuit is designed using 0.18 μm CMOS technology. A supply voltage of ±0.3 V and a quiescent bias current of 5 μA are used. The PSpice simulation result shows that the power consumption of the proposed BD-QFG OTA is 13.4 μW. Thus, the circuit is suitable for low-power applications. In order to confirm that the proposed BD-QFG OTA can be used in analog signal processing, a BD-QFG OTA-based diodeless precision rectifier is designed as an example application. This rectifier employs only two BD-QFG OTAs and consumes only 26.8 μW.

  1. Transmission Benefits of Co-Locating Concentrating Solar Power and Wind

    Energy Technology Data Exchange (ETDEWEB)

    Sioshansi, R.; Denholm, P.

    2012-03-01

    In some areas of the U.S. transmission constraints are a limiting factor in deploying new wind and concentrating solar power (CSP) plants. Texas is an example of one such location, where the best wind and solar resources are in the western part of the state, while major demand centers are in the east. The low capacity factor of wind is a compounding factor, increasing the relative cost of new transmission per unit of energy actually delivered. A possible method of increasing the utilization of new transmission is to co-locate both wind and concentrating solar power with thermal energy storage. In this work we examine the benefits and limits of using the dispatachability of thermal storage to increase the capacity factor of new transmission developed to access high quality solar and wind resources in remote locations.

  2. On the Relationship between Transmission Power and Capacity of an Underwater Acoustic Communication Channel

    CERN Document Server

    Lucani, Daniel E; Médard, Muriel

    2008-01-01

    The underwater acoustic channel is characterized by a path loss that depends not only on the transmission distance, but also on the signal frequency. As a consequence, transmission bandwidth depends on the transmission distance, a feature that distinguishes an underwater acoustic system from a terrestrial radio system. The exact relationship between power, transmission band, distance and capacity for the Gaussian noise scenario is a complicated one. This work provides a closed-form approximate model for 1) power consumption, 2) band-edge frequency and 3) bandwidth as functions of distance and capacity required for a data link. This approximate model is obtained by numerical evaluation of analytical results which takes into account physical models of acoustic propagation loss and ambient noise. The closed-form approximations may become useful tools in the design and analysis of underwater acoustic networks.

  3. Decorative power generating panels creating angle insensitive transmissive colors.

    Science.gov (United States)

    Lee, Jae Yong; Lee, Kyu-Tae; Seo, Sungyong; Guo, L Jay

    2014-02-28

    We present ultra-thin (6 to 31 nm) undoped amorphous silicon/organic hybrid solar cell structure, which can transmit desired color of light. The transmitted colors show great angular tolerance due to the negligible optical phase associated with light propagating in ultra-thin amorphous silicon (a-Si) layers. We achieved the power conversion efficiency of the hybrid cells up to 2 %; and demonstrated that most of the absorbed photons in the undoped a-Si layer contributed to the extracted electric charges due to the suppressed electron-hole recombination in the ultra-thin a-Si layer. We also show the resonance is invariant with respect to the angle of incidence up to ± 70° regardless of the polarization of the incident light. Our exploration provides a design to realize energy harvesting colored photovoltaic panels for innovative applications.

  4. Rocket experiment on microwave power transmission with Furoshiki deployment

    Science.gov (United States)

    Kaya, Nobuyuki; Iwashita, Masashi; Tanaka, Kohei; Nakasuka, Shinichi; Summerer, Leopold

    2009-07-01

    Huge antennas has many useful applications in space as well as on the ground, for example, Solar Power Satellite to provide electricity to the ground, telecommunication for cellular phones, radars for remote sensing, navigation and observation, and so on. The S-310-36 sounding rocket was successfully launched on 22 January 2006 to verify our newly proposed scheme to construct huge antennas under microgravity condition in space. The rocket experiment has three main objectives, the first objective of which is to verify the Furoshiki deployment system [S. Nakasuka, R. Funase, K. Nakada, N. Kaya, J. Mankins, Large membrane "FUROSHIKI Satellite" applied to phased array antenna and its sounding rocket experiment, in: Proceedings of the 54th International Astronautical Congress, 2003. [1

  5. Decorative power generating panels creating angle insensitive transmissive colors

    Science.gov (United States)

    Lee, Jae Yong; Lee, Kyu-Tae; Seo, Sungyong; Guo, L. Jay

    2014-02-01

    We present ultra-thin (6 to 31 nm) undoped amorphous silicon/organic hybrid solar cell structure, which can transmit desired color of light. The transmitted colors show great angular tolerance due to the negligible optical phase associated with light propagating in ultra-thin amorphous silicon (a-Si) layers. We achieved the power conversion efficiency of the hybrid cells up to 2 %; and demonstrated that most of the absorbed photons in the undoped a-Si layer contributed to the extracted electric charges due to the suppressed electron-hole recombination in the ultra-thin a-Si layer. We also show the resonance is invariant with respect to the angle of incidence up to +/-70° regardless of the polarization of the incident light. Our exploration provides a design to realize energy harvesting colored photovoltaic panels for innovative applications.

  6. LQR Feedback Control Development for Wind Turbines Featuring a Digital Fluid Power Transmission System

    DEFF Research Database (Denmark)

    Pedersen, Niels Henrik; Johansen, Per; Andersen, Torben O.

    2016-01-01

    Research within digital fluid power (DFP) transmissions is receiving an increased attention as an alternative to conventional transmission technologies. The use of DFP displacement machines entail a need for applicable control algorithms. However, the design and analysis of controllers...... for such digital systems are complicated by its non-smooth behavior. In this paper a control design approach for a digital displacement machine® is proposed and a performance analysis of a wind turbine using a DFP transmission is presented. The performance evaluation is based on a dynamic model of the transmission...... invariant model. Using full-field flow wind profiles as input, the design approach and control performance is verified by simulation in the dynamic model of the wind turbine featuring the DFP transmission. Additionally, the performance is compared to that of the conventional NREL reference turbine...

  7. An Optimal Joint User Association and Power Allocation Algorithm for Secrecy Information Transmission in Heterogeneous Networks

    Directory of Open Access Journals (Sweden)

    Rong Chai

    2017-01-01

    Full Text Available In recent years, heterogeneous radio access technologies have experienced rapid development and gradually achieved effective coordination and integration, resulting in heterogeneous networks (HetNets. In this paper, we consider the downlink secure transmission of HetNets where the information transmission from base stations (BSs to legitimate users is subject to the interception of eavesdroppers. In particular, we stress the problem of joint user association and power allocation of the BSs. To achieve data transmission in a secure and energy efficient manner, we introduce the concept of secrecy energy efficiency which is defined as the ratio of the secrecy transmission rate and power consumption of the BSs and formulate the problem of joint user association and power allocation as an optimization problem which maximizes the joint secrecy energy efficiency of all the BSs under the power constraint of the BSs and the minimum data rate constraint of user equipment (UE. By equivalently transforming the optimization problem into two subproblems, that is, power allocation subproblem and user association subproblem of the BSs, and applying iterative method and Kuhn-Munkres (K-M algorithm to solve the two subproblems, respectively, the optimal user association and power allocation strategies can be obtained. Numerical results demonstrate that the proposed algorithm outperforms previously proposed algorithms.

  8. Comprehensive evaluation of power grid projects' investment benefits under the reform of transmission and distribution price

    Science.gov (United States)

    Wang, Yongli; Wang, Gang; Zuo, Yi; Fan, Lisha; Ling, Yunpeng

    2017-03-01

    On March 15, 2015, the Central Office issued the "Opinions on Further Deepening the Reform of Electric Power System" (Zhong Fa No. 9). This policy marks the central government officially opened a new round of electricity reform. As a programmatic document under the new situation to comprehensively promote the reform of the power system, No. 9 document will be approved as a separate transmission and distribution of electricity prices, which is the first task of promoting the reform of the power system. Grid tariff reform is not only the transmission and distribution price of a separate approval, more of the grid company input-output relationship and many other aspects of deep-level adjustments. Under the background of the reform of the transmission and distribution price, the main factors affecting the input-output relationship, such as the main business, electricity pricing, and investment approval, financial accounting and so on, have changed significantly. The paper designed the comprehensive evaluation index system of power grid projects' investment benefits under the reform of transmission and distribution price to improve the investment efficiency of power grid projects after the power reform in China.

  9. Power Flow Analysis of HVAC and HVDC Transmission Systems for Offshore WindParks

    DEFF Research Database (Denmark)

    da Silva, Filipe Miguel Faria; Castro, Rui

    2009-01-01

    , the two options are analysed from a power flow point of view. The influence in the voltage regulation of the onshore connection busbar is investigated in a 57 bus test power system. The simulation results obtained for each one of the above mentioned transmission system configurations allow the conclusion......As the onshore wind resource is running shorter, wind power promoters are paying attention to the offshore resources. As in most cases there is no load offshore, wind power must be transmitted to the main land. To do so, two options are available: HVAC and HVDC transmission systems. In this paper...... that HVAC solution is limited by the distance to shore and by the wind transmitted power. HVDC options do not show these limitations, but are more expensive and more delicate to deal with, because there is a lack of operational experience, so far....

  10. REACTIVE POWER CONTROL AND TRANSMISSION LOSS REDUCTION WITH REALIZATION OF SVC AND TCSC

    Directory of Open Access Journals (Sweden)

    J. V. Parate

    2012-07-01

    Full Text Available In general the problem of reactive power control is viewed from two aspects: load compensation and voltage support. This is utilized to reduce the total system real power loss or voltage deviation as an objective to compute optimal settings of reactive power output or terminal voltages of generating plants, transformer tap settings and output of other compensating devices such as capacitor banks and synchronous condensers. This paper has considered the setting of flexible AC transmission system (FACTS devices as additional controlparameters for transmission loss reduction in power system and the impact on system loss reduction in power system. Static models of two FACTS devices consisting of static var compensator (SVC, thyristor controlled series compensator (TCSC have been included in the problem formulation. The proposed algorithm has been applied to 9-bus test system and IEEE 14-bus system.

  11. MILP Approach for Bilevel Transmission and Reactive Power Planning Considering Wind Curtailment

    DEFF Research Database (Denmark)

    Ugranli, Faruk; Karatepe, Engin; Nielsen, Arne Hejde

    2017-01-01

    In this study, two important planning problems in power systems that are transmission expansion and reactive power are formulated as a mixed-integer linear programming taking into account the bilevel structure due to the consideration of market clearing under several load-wind scenarios....... The objective of the proposed method is to minimize the installation cost of transmission lines, reactive power sources, and the annual operation costs of conventional generators corresponding to the curtailed wind energy while maintaining the reliable system operation. Lower level problems of the bilevel...... structure are designated for the market clearing which is formulated by using the linearized optimal power flow equations. In order to obtain mixed-integer linear programming formulation, the so-called lower level problems are represented by using primal-dual formulation. By using the proposed method, power...

  12. Efficient utilization of wind power: Long-distance transmission or local consumption?

    Science.gov (United States)

    Sun, Yuanzhang; Ma, Xiyuan; Xu, Jian; Bao, Yi; Liao, Siyang

    2017-09-01

    Excess wind power produced in wind-intensive areas is normally delivered to remote load centers via long-distance transmission lines. This paper presents a comparison between long-distance transmission, which has gained popularity, and local energy consumption, in which a fraction of the generated wind power can be locally consumed by energy-intensive industries. First, the challenges and solutions to the long-distance transmission and local consumption of wind power are presented. Then, the two approaches to the utilization of wind power are compared in terms of system security, reliability, cost, and capability to utilize wind energy. Finally, the economic feasibility and technical feasibility of the local consumption of wind power are demonstrated by a large and isolated industrial power system, or supermicrogrid, in China. The coal-fired generators together with the short-term interruptible electrolytic aluminum load in the supermicrogrid are able to compensate for the intermittency of wind power. In the long term, the transfer of high-energy-consumption industries to wind-rich areas and their local consumption of the available wind power are beneficial.

  13. Modeling the Impacts of Geomagnetic Disturbances on the New York State Power Transmission System

    Science.gov (United States)

    Ouedraogo, D.; Castillo, O. L.; Mohamed, A.; Damas, M. C.; Ngwira, C. M.

    2015-12-01

    Our society today relies heavily on electricity in order to meet its essential basic needs. However, to meet the rising demands for this energy, all power companies require smooth and efficient delivery of services to the consumers. The US power grid is a complex electrical apparatus that has well known sensitivities to space weather disturbances. Events produced by space weather includes solar storms or geomagnetic disturbances [GMD]. The propagation of such events in the direction of Earth perturbs the electric currents in the magnetosphere and the ionosphere, causing a unique effect known as a Geomagnetically Induced Current [GIC]. GICs are known to saturate and overheat transformers in the power grid, threatening the safe operation of the power system. A GMD induces a geoelectric field in high-voltage and extra high-voltage transmission circuits. This geoelectric field represents electromotive force, and causes GICs to circulate through transmission circuits and transformers. Power models are being developed using MATLAB/Simulink® software to simulate the propagation of GIC flows in a power system, while using New York State (NYS) power transmission network as an example. We will present results of the models used to assess the impacts of possible GMD strikes on the various parts of the power network.

  14. Toward space solar power: Wireless energy transmission experiments past, present and future

    Science.gov (United States)

    Little, Frank E.; McSpadden, James O.; Chang, Kai; Kaya, Nobuyuki

    1998-01-01

    Solar power is a reality. Today, increasing numbers of photovoltaic and other solar-powered installations are in service around the world and in space. These uses range from the primary electric power source for satellites, remote site scientific experiments and villages in developing countries to augmenting the commercial electric grid and providing partial power for individual businesses and homeowners in developed countries. In space, electricity generated by photovoltaic conversion of solar energy is the mainstay of power for low Earth and geostationary satellite constellations. Still, for all its acceptance as a benign and environmentally friendly energy source, terrestrial solar power has yet to be seriously considered a viable technology for providing base electrical generating capacity. The obvious reason is sunshine on Earth is too unreliable. In addition to the diurnal and seasonal cycles, inclement weather reduces the average daily period and intensity of insolation. However, the Sun shines constantly in space. The challenge is to harvest and transmit the energy from space to Earth. The concept of space solar power based on microwave wireless energy transmission was first put forth more than 25 years ago by Dr. Peter Glaser. We review historical experiments in wireless energy transmission which have brought the technology from a laboratory curiosity to its present status. Results from recent experiments and their implications for wireless energy transmission as an enabling technology for space solar power are reviewed. Current developments are discussed along with proposed terrestrial and space experiments.

  15. Applying a New Parallelized Version of PSO Algorithm for Electrical Power Transmission

    Science.gov (United States)

    Zemzami, M.; Makhloufi, A.; Elhami, N.; Elhami, A.; Itmi, M.; Hmina, N.

    2017-06-01

    In this paper, the optimization of an electric power transmission material is presented giving specific consideration on material configuration and characteristics. The nature of electric power transmission networks makes it hard to manage. Thus, giving need for optimization. So the problem of optimization of electric power transmission as considered in this paper is improving the performance and reliability of the electricity pylon; the objective is to maximize resistance to load while reducing material usage and cost. For this purpose, we suggest a new version of PSO algorithm that allows the amelioration of its performance by introducing its parallelization associated to the concept of evolutionary neighborhoods. According to the experimental results, the proposed method is effective and outperforms basic PSO in terms of solution quality, accuracy, constraint handling, and time consuming.

  16. A Comprehensive Review of Embedded Transmission Pricing Methods Based on Power Flow Tracing Techniques

    Directory of Open Access Journals (Sweden)

    Baseem Khan

    2013-01-01

    Full Text Available Restructuring of electricity supply industry introduced the concept of deregulation. After deregulation transmission cost allocation is a vital issue. In the available literature, various authors have presented different methods for allocation of transmission cost. This paper presents the review of a variety of methods and algorithm based on the principle of power-flow tracing. For a fair and equitable transmission charge allocation it is necessary to know the quantum of power flowing by each generator and load in line flows. Power flow tracing techniques are mainly based on the concepts of proportional sharing principle, graph theory, circuit theory (Z-bus tracing, optimization approach, relative electrical distance concept, Equilateral bilateral exchange (EBE, and game theory. This paper presents a comprehensive review of all the available literature on the above.

  17. Proactive and reactive transmission power control for energy-efficient on-body communications.

    Science.gov (United States)

    Vallejo, Mónica; Recas, Joaquín; Ayala, José L

    2015-03-11

    In wireless body sensor network (WBSNs), the human body has an important effect on the performance of the communication due to the temporal variations caused and the attenuation and fluctuation of the path loss. This fact suggests that the transmission power must adapt to the current state of the link in a way that it ensures a balance between energy consumption and packet loss. In this paper, we validate our two transmission power level policies (reactive and predictive approaches) using the Castalia simulator. The integration of our experimental measurements in the simulator allows us to easily evaluate complex scenarios, avoiding the difficulties associated with a practical realization. Our results show that both schemes perform satisfactorily, providing overall energy savings of 24% and 22% for a case of study, as compared to the maximum transmission power mode.

  18. Proactive and Reactive Transmission Power Control for Energy-Efficient On-Body Communications

    Science.gov (United States)

    Vallejo, Mónica; Recas, Joaquín.; Ayala, José L.

    2015-01-01

    In wireless body sensor network (WBSNs), the human body has an important effect on the performance of the communication due to the temporal variations caused and the attenuation and fluctuation of the path loss. This fact suggests that the transmission power must adapt to the current state of the link in a way that it ensures a balance between energy consumption and packet loss. In this paper, we validate our two transmission power level policies (reactive and predictive approaches) using the Castalia simulator. The integration of our experimental measurements in the simulator allows us to easily evaluate complex scenarios, avoiding the difficulties associated with a practical realization. Our results show that both schemes perform satisfactorily, providing overall energy savings of 24% and 22% for a case of study, as compared to the maximum transmission power mode. PMID:25769049

  19. Transmission Congestion and Voltage Profile Management Using TCSC and TCPAR in Deregulated Power System

    Directory of Open Access Journals (Sweden)

    K.Ragini

    2014-10-01

    Full Text Available In present days all our basic needs are relates with electricity. As the population increases, the demand for electricity is also tremendously increases. In the past, the entire electricity industry is under the control of government and also monopolized. But now, the power industry in many countries is moving rapidly from regulated conventional setup to deregulated environment. The transmission congestion is one of the technical problems that particularly appear in the deregulated power system. If congestion is not managed we face the problems of electricity price improvement and security and stability problems. Congestion relief can be handled using FACTS device such as TCSC, TCPAR where transmission capability will be improved. These FACTS devices are optimally placed on transmission system using Sensitivity approach method. The proposed method is carried out on Modified IEEE-14 bus system and IEEE-24 bus system Using Power World Simulator17 software.

  20. The effect analysis of strain rate on power transmission tower-line system under seismic excitation.

    Science.gov (United States)

    Tian, Li; Wang, Wenming; Qian, Hui

    2014-01-01

    The effect analysis of strain rate on power transmission tower-line system under seismic excitation is studied in this paper. A three-dimensional finite element model of a transmission tower-line system is created based on a real project. Using theoretical analysis and numerical simulation, incremental dynamic analysis of the power transmission tower-line system is conducted to investigate the effect of strain rate on the nonlinear responses of the transmission tower and line. The results show that the effect of strain rate on the transmission tower generally decreases the maximum top displacements, but it would increase the maximum base shear forces, and thus it is necessary to consider the effect of strain rate on the seismic analysis of the transmission tower. The effect of strain rate could be ignored for the seismic analysis of the conductors and ground lines, but the responses of the ground lines considering strain rate effect are larger than those of the conductors. The results could provide a reference for the seismic design of the transmission tower-line system.

  1. Markets to Facilitate Wind and Solar Energy Integration in the Bulk Power Supply: An IEA Task 25 Collaboration; Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Milligan, M.; Holttinen, H.; Soder, L.; Clark, C.; Pineda, I.

    2012-09-01

    Wind and solar power will give rise to challenges in electricity markets regarding flexibility, capacity adequacy, and the participation of wind and solar generators to markets. Large amounts of wind power will have impacts on bulk power system markets and electricity prices. If the markets respond to increased wind power by increasing investments in low-capital, high-cost or marginal-cost power, the average price may remain in the same range. However, experiences so far from Denmark, Germany, Spain, and Ireland are such that the average market prices have decreased because of wind power. This reduction may result in additional revenue insufficiency, which may be corrected with a capacity market, yet capacity markets are difficult to design. However, the flexibility attributes of the capacity also need to be considered. Markets facilitating wind and solar integration will include possibilities for trading close to delivery (either by shorter gate closure times or intraday markets). Time steps chosen for markets can enable more flexibility to be assessed. Experience from 5- and 10-minute markets has been encouraging.

  2. [An implantable micro-device using wireless power transmission for measuring aortic aneurysm sac pressure].

    Science.gov (United States)

    Guo, Xudong; Ge, Bin; Wang, Wenxing

    2013-08-01

    In order to detect endoleaks after endovascular aneurysm repair (EVAR), we developed an implantable micro-device based on wireless power transmission to measure aortic aneurysm sac pressure. The implantable micro-device is composed of a miniature wireless pressure sensor, an energy transmitting coil, a data recorder and a data processing platform. Power transmission without interconnecting wires is performed by a transmitting coil and a receiving coil. The coupling efficiency of wireless power transmission depends on the coupling coefficient between the transmitting coil and the receiving coil. With theoretical analysis and experimental study, we optimized the geometry of the receiving coil to increase the coupling coefficient. In order to keep efficiency balance and satisfy the maximizing conditions, we designed a closed loop power transmission circuit, including a receiving voltage feedback module based on wireless communication. The closed loop improved the stability and reliability of transmission energy. The prototype of the micro-device has been developed and the experiment has been performed. The experiments showed that the micro-device was feasible and valid. For normal operation, the distance between the transmitting coil and the receiving coil is smaller than 8cm. Besides, the distance between the micro-device and the data recorder is within 50cm.

  3. Strong ground movement induced by mining activities and its effect on power transmission structures

    Institute of Scientific and Technical Information of China (English)

    DAI Kao-shan; CHEN Shen-en

    2009-01-01

    Surface mining activities may introduce damages to nearby infrastructure. Concerns are put forward by the power company about structural integrity of electric power transmission structures in areas where coal mining activities cause strong ground vibrations. Common practice in the power industry is to limit ground motion by specifying maximum Peak Particle Velocity. So far, there is a lack of industry-wide recognized guidelines on how ground vibration limits should be set for the transmission structures. In order to develop a defense strategy to protect power transmission lines against strong ground motions in mining areas, a systematic research work was conducted to establish strong ground vibration characteristics and to study impacts of ground excitations on transmission pole structures. Ground movements were recorded using geophones and wireless tri-axial sensing units. The process of generating ground motion response spectra via analyzing actual ground motion measurements is described in the paper. These spectra developed based on peak particle velocities were used as a basis for spectral analysis performed using validated Finite Element models to obtain structural displacements, reactions and stress states of the transmission pole structures in the mining sites. A quantitative ground motion limit was established by comparing structural responses with the corresponding design requirements.

  4. Characteristic of wireless power transmission S-Parameter for a superconductor coil

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, In Sung; Jung, Byung Ik; Choi, Hyo Sang [Chosun University, Gwangju (Korea, Republic of)

    2015-03-15

    Many studies are being conducted to implement wireless charging, for example, for cellular phones or electronic tooth brushes, via wireless power transmission technique. However, the magnetic induction method had a very short transmission distance. To solve this problem, the team of Professor Marin Soljacic proposed a magnetic resonance system that used two resonance coils with the same resonance frequency. It had an approximately 40% efficiency at a 2m distance. The system improved the low efficiency and short distance problems of the existing systems. So it could also widen the application range of wireless power transmission. Many studies on the subject are underway. In this paper, the superconductor coil was used to improve the efficiency of magnetic resonance wireless power transmission. The resonance wireless power transmission system had a source coil, a load coil, and resonance coils (a transmitter and a receiver). The efficiency and distance depended on the characteristics of the transmitter and receiver coils that had the same resonance frequency. Therefore, two resonance coils were fabricated by superconductors. The current density of the superconductor was higher than that of the normal conductor coil. Accordingly, it had a high quality-factor and improved efficiency.

  5. Improvement of wireless power transmission efficiency of implantable subcutaneous devices by closed magnetic circuit mechanism.

    Science.gov (United States)

    Jo, Sung-Eun; Joung, Sanghoon; Suh, Jun-Kyo Francis; Kim, Yong-Jun

    2012-09-01

    Induction coils were fabricated based on flexible printed circuit board for inductive transcutaneous power transmission. The coil had closed magnetic circuit (CMC) structure consisting of inner and outer magnetic core. The power transmission efficiency of the fabricated device was measured in the air and in vivo condition. It was confirmed that the CMC coil had higher transmission efficiency than typical air-core coil. The power transmission efficiency during a misalignment between primary coil and implanted secondary coil was also evaluated. The decrease of mutual inductance between the two coils caused by the misalignment led to a low efficiency of the inductive link. Therefore, it is important to properly align the primary coil and implanted secondary coil for effective power transmission. To align the coils, a feedback coil was proposed. This was integrated on the backside of the primary coil and enabled the detection of a misalignment of the primary and secondary coils. As a result of using the feedback coil, the primary and secondary coils could be aligned without knowledge of the position of the implanted secondary coil.

  6. Electrical Structure of Future Off-shore Wind Power Plant with a High Voltage Direct Current Power Transmission

    DEFF Research Database (Denmark)

    Sharma, Ranjan

    to control and as such a high current capacity of the WPP side VSC might be required. Detailed simulation results are included in the report. The other option is to use a DC chopper, the results of which are also presented in detail in the report. It is observed that a DC chopper can provide a simple...... are related to surplus reactive power and added losses. On the other hand, HVDC transmission system can be arbitrarily long and for long distance power transmission requirement it provides much better efficiency compared to a corresponding HVAC system. HVDC may provide a viable solution for high power...... to trip off during temporary grid side faults, commonly described as low voltage fault-ride-through requirement. There are four different fault-ride-through options discussed in the report. The first option includes controlling of collector network frequency. This provides a very good opportunity to use...

  7. Rate-aware optimal transmission power analysis in wireless ad hoc networks

    Institute of Scientific and Technical Information of China (English)

    Chen Lin; Li Minglu; Yu Jiadi

    2008-01-01

    The problem of transmission power control in a rate-aware way is investigated to improve the through put of wireless ad hoe network.The behavior of basic IEEE 802.11 DCF is approximated by the p-persistent CSMA through a Markov chain model.The throughput model takes hidden terminals, multi-hop flow and concurrent interference into account.Numerical results show that the optimal transmission power derived from this model could balance the tradeoff between spatial reuse and data rate and hence yield maximum throughput.

  8. Transmission Technologies and Operational Characteristic Analysis of Hybrid UHV AC/DC Power Grids in China

    Science.gov (United States)

    Tian, Zhang; Yanfeng, Gong

    2017-05-01

    In order to solve the contradiction between demand and distribution range of primary energy resource, Ultra High Voltage (UHV) power grids should be developed rapidly to meet development of energy bases and accessing of large-scale renewable energy. This paper reviewed the latest research processes of AC/DC transmission technologies, summarized the characteristics of AC/DC power grids, concluded that China’s power grids certainly enter a new period of large -scale hybrid UHV AC/DC power grids and characteristics of “strong DC and weak AC” becomes increasingly pro minent; possible problems in operation of AC/DC power grids was discussed, and interaction or effect between AC/DC power grids was made an intensive study of; according to above problems in operation of power grids, preliminary scheme is summarized as fo llows: strengthening backbone structures, enhancing AC/DC transmission technologies, promoting protection measures of clean energ y accessing grids, and taking actions to solve stability problems of voltage and frequency etc. It’s valuable for making hybrid UHV AC/DC power grids adapt to operating mode of large power grids, thus guaranteeing security and stability of power system.

  9. Marine High Voltage Power Conditioning and Transmission System with Integrated Storage DE-EE0003640 Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Frank Hoffmann, PhD; Aspinall, Rik

    2012-12-10

    Design, Development, and test of the three-port power converter for marine hydrokinetic power transmission. Converter provides ports for AC/DC conversion of hydrokinetic power, battery storage, and a low voltage to high voltage DC port for HVDC transmission to shore. The report covers the design, development, implementation, and testing of a prototype built by PPS.

  10. Distributed coordination of power flow controlling devices in transmission systems; Verteilte koordinierte Lastflusssteuerung in elektrischen Energieuebertragungsnetzen

    Energy Technology Data Exchange (ETDEWEB)

    Haeger, Ulf; Rehtanz, Christian [Technische Univ. Dortmund (Germany); Lehnhoff, Sebastian [OFFIS - Institut fuer Informatik, Oldenburg (Germany)

    2011-07-01

    Energy market activities together with an increasing integration of high capacity unpredictable renewable resources (e. g. wind power) pose an increased utilization of electrical transmission networks. In order to eliminate consequential congestions it is necessary to upgrade the grid. Constructing new lines is difficult due to environmental specifications. An alternative is the integration of power flow controllers in order to dynamically redirect power flows. In this paper we present a multi-agent based algorithm that allows for an autonomous distributed coordination of power flow controllers. (orig.)

  11. Enhancing power transfer capability through flexible AC transmission system devices:a review

    Institute of Scientific and Technical Information of China (English)

    Fadi M ALBATSH; Saad MEKHILEF; Shameem AHMAD; H MOKHLIS; M A HASSAN

    2015-01-01

    Global demand for power has significantly increased, but power generation and transmission capacities have not increased proportionally with this demand. As a result, power consumers suffer from various problems, such as voltage and frequency instability and power quality issues. To overcome these problems, the capacity for available power transfer of a transmission network should be enhanced. Researchers worldwide have addressed this issue by using flexible AC transmission system (FACTS) devices. We have conducted a comprehensive review of how FACTS controllers are used to enhance the avail-able transfer capability (ATC) and power transfer capability (PTC) of power system networks. This review includes a discussion of the classification of different FACTS devices according to different factors. The popularity and applications of these devices are discussed together with relevant statistics. The operating principles of six major FACTS devices and their application in increasing ATC and PTC are also presented. Finally, we evaluate the performance of FACTS devices in ATC and PTC im-provement with respect to different control algorithms.

  12. Micro-size antenna structure with vertical nanowires for wireless power transmission and communication.

    Science.gov (United States)

    Kang, Jong-Gu; Jeong, Yeri; Shin, Jeong Hee; Choi, Ji-Woong; Sohn, Jung Inn; Cha, Seung Nam; Jang, Jae Eun

    2014-11-01

    For biomedical implanted devices, a wireless power or a signal transmission is essential to protect an infection and to enhance durability. In this study, we present a magnetic induction technique for a power transmission without any wire connection between transmitter (Tx) and receiver (Rx) in a micro scale. Due to a micro size effect of a flat spiral coil, a magnetic inductance is not high. To enhance the magnetic inductance, a three dimensional magnetic core is added to an antenna structure, which is consisted of ZnO nano wires coated by a nickel (Ni) layer. ZnO nano wires easily supply a large effective surface area with a vertical structural effect to the magnetic core structure, which induces a higher magnetic inductance with a ferro-magnetic material Ni. The magnetic induction antenna with the magnetic core shows a high inductance value, a low reflection power and a strong power transmission. The power transmission efficiencies are tested under the air and the water medium are almost the same values, so that the magnetic induction technique is quite proper to body implanted systems.

  13. GPS-Like Phasing Control of the Space Solar Power System Transmission Array

    Science.gov (United States)

    Psiaki, Mark L.

    2003-01-01

    The problem of phasing of the Space Solar Power System's transmission array has been addressed by developing a GPS-like radio navigation system. The goal of this system is to provide power transmission phasing control for each node of the array that causes the power signals to add constructively at the ground reception station. The phasing control system operates in a distributed manner, which makes it practical to implement. A leader node and two radio navigation beacons are used to control the power transmission phasing of multiple follower nodes. The necessary one-way communications to the follower nodes are implemented using the RF beacon signals. The phasing control system uses differential carrier phase relative navigation/timing techniques. A special feature of the system is an integer ambiguity resolution procedure that periodically resolves carrier phase cycle count ambiguities via encoding of pseudo-random number codes on the power transmission signals. The system is capable of achieving phasing accuracies on the order of 3 mm down to 0.4 mm depending on whether the radio navigation beacons operate in the L or C bands.

  14. Risk Evaluation on UHV Power Transmission Construction Project Based on AHP and FCE Method

    Directory of Open Access Journals (Sweden)

    Huiru Zhao

    2014-01-01

    Full Text Available Ultra high voltage (UHV power transmission construction project is a high-tech power grid construction project which faces many risks and uncertainty. Identifying the risk of UHV power transmission construction project can help mitigate the risk loss and promote the smooth construction. The risk evaluation on “Zhejiang-Fuzhou” UHV power transmission construction project was performed based on analytic hierarchy process (AHP and fuzzy comprehensive evaluation (FCE method in this paper. After the risk evaluation index system was built, the AHP was used to determine the weights of risk indicators, and the FCE method was to perform the risk evaluation. The evaluation result shows that (1 “Zhejiang-Fuzhou” UHV power transmission construction project has moderate risk, which indicates the occurrence probability of project risk is medium and the risk occurrence will cause general loss for project, (2 “society risk” has the highest level, and the next is “policy and law risk,” “technique risk,” “natural environmental risk,” and “Management risk,” respectively, and it should keep main eye on the social risk, policy and law risk, and technique risk. Finally, according to the risk evaluation result, the specific risk control recommendations were proposed for the smooth construction of this project.

  15. Understanding the power reflection and transmission coefficients of a plane wave at a planar interface

    Science.gov (United States)

    Ye, Qian; Jiang, Yikun; Lin, Haoze

    2017-03-01

    In most textbooks, after discussing the partial transmission and reflection of a plane wave at a planar interface, the power (energy) reflection and transmission coefficients are introduced by calculating the normal-to-interface components of the Poynting vectors for the incident, reflected and transmitted waves, separately. Ambiguity arises among students since, for the Poynting vector to be interpreted as the energy flux density, on the incident (reflected) side, the electric and magnetic fields involved must be the total fields, namely, the sum of incident and reflected fields, instead of the partial fields which are just the incident (reflected) fields. The interpretation of the cross product of partial fields as energy flux has not been obviously justified in most textbooks. Besides, the plane wave is actually an idealisation that is only ever found in textbooks, then what do the reflection and transmission coefficients evaluated for a plane wave really mean for a real beam of limited extent? To provide a clearer physical picture, we exemplify a light beam of finite transverse extent by a fundamental Gaussian beam and simulate its reflection and transmission at a planar interface. Due to its finite transverse extent, we can then insert the incident fields or reflected fields as total fields into the expression of the Poynting vector to evaluate the energy flux and then power reflection and transmission coefficients. We demonstrate that the power reflection and transmission coefficients of a beam of finite extent turn out to be the weighted sum of the corresponding coefficients for all constituent plane wave components that form the beam. The power reflection and transmission coefficients of a single plane wave serve, in turn, as the asymptotes for the corresponding coefficients of a light beam as its width expands infinitely.

  16. In-Containment Signal Acquisition and Data Transmission via Power Lines within High Dose Areas of Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Mueller Steffen; Wibbing Sascha; Weigel Robert; Koelpin Alexander [Institute for Electronics Engineering, University of Erlangen-Nuremberg (Germany); Dennerlein, Juergen; Janke, Iryna; Weber, Johannes [AREVA GmbH, Paul-Gossen-Str. 100, 91052 Erlangen (Germany)

    2015-07-01

    Signal acquisition and data transmission for innovative sensor systems and networks inside the containment of nuclear power plants (NPPs) is still a challenge with respect to safety, performance, reliability, availability, and costs. This especially applies to equipment upgrades for existing plants, special measurements, but also for new builds. This paper presents a novel method for efficient and cost-effective sensor signal acquisition and data transmission via power lines, in order to cope with the disadvantages of common system architectures that often suffer from poor signal integrity due to raw data transmissions via long cables, huge efforts and costs for installation, and low flexibility with respect to maintenance and upgrades. A transmitter-receiver architecture is proposed that allows multiplexing of multiple sensor inputs for unidirectional point-to-point transmission by superimposing information signals on existing AC or DC supply lines, but also on active and inactive sensor wires, or spare cables, using power line communication (PLC) technology. Based on commercial off-the-shelf (COTS) electronic parts, a radiation hard transmitter hardware is designed to operate in harsh environment within the containment during full plant operation. The system's modular approach allows application specific trade-offs between redundancy and throughput regarding data transmission, as well as various sensor input front-ends which are compatible with state of the art systems. PLC technology eliminates the need for costly installation of additional cables and wall penetrations, while providing a complementary and diverse communication technology for upgrades of existing systems. At the receiver side in low dose areas, signals are extracted from the power line, demodulated, and de-multiplexed, in order to regain the original sensor signal information and provide it either in analog or digital output format. Successful laboratory qualification tests, field trails

  17. A Flexible Approach for Smart Management of Transmissions in Power Line Communications

    Directory of Open Access Journals (Sweden)

    Mario Collotta

    2014-01-01

    Full Text Available Power line communications (PLCs refer to a technology based on the existing electrical wiring to transmit data among the devices connected to the network. The PLC technology is an excellent solution widely studied and analysed by researchers, even in those areas characterized by strict requirements, such as industries. In this paper, a technique based on fuzzy logic, for the dynamic management of the amplitude of the signal emitted by the devices of a power line network, is proposed. The main aim is to manage the amplitude of the transmission signal in order to reduce the noise introduced into the network, and, as a consequence, the power consumption, increasing data transmission quality of network in terms of Quality of Service (QoS. This solution has been implemented into embedded systems based on the ADD1010, a power line System on Chip (SoC, and tested through a real scenario realized in laboratory.

  18. Mechanical Implementation and Simulation of MoboLab, A Mobile Robot for Inspection of Power Transmission Lines

    OpenAIRE

    Mahmud Saadat Foumani; Mostafa Nayyerloo; Seyyed Mohammad Mehdi Yeganehparast; Alireza Barati

    2008-01-01

    This paper describes the first phase in development of a mobile robot that can navigate aerial power transmission lines completely unattended by human operator. Its ultimate purpose is to automate inspection of power transmission lines and their equipments. The authors have developed a scaled functional model of such a mobile robot with a preliminary simple computer based on-off controller. MoboLab (Mobile Laboratory) navigates a power transmission line between two strain towers. It can maneu...

  19. Guiding Principles in Selecting AC To DC Converters For Power Factor Corrections in AC Transmission System

    Directory of Open Access Journals (Sweden)

    Ibekwe B.E

    2014-10-01

    Full Text Available The ac to dc converters’ power factors correction in ac transmission system were investigated. The studies include: phase-controlled converter; pulse width modulated (PWM converter and ac input current shaped converter. Using Fourier series, power factors of these converters were calculated and simulated using MATLAB. The resulting curves are displayed in the hard copies for practical guides in the choice of converters; and comparatively, current shaped type is the best.

  20. Power flow transmission in a coupled flexible system with active executive elements

    Institute of Scientific and Technical Information of China (English)

    HUO Rui; SHI Yin; SONG Kongjie

    2002-01-01

    Based on its prototype of machine-isolator-foundation systems, a theoretical model for dynamic coupled linear system is established, in which both the passive and active control factors are considered. Power flow is used as the cost function to evaluate the isolation effectiveness. And the transmission of vibratory power flow from a vibrating rigid body into a simply supported thin panel through passive isolators and actuators is investigated numerically. The active control strategy is summarized in the conclusion.

  1. High precision ultrasonic guided wave technique for inspection of power transmission line

    Science.gov (United States)

    Cheng, Jun; Qiu, Jinhao; Ji, Hongli; Wang, Enrong; Takagi, Toshiyuki; Uchimoto, Tetsuya

    2017-01-01

    Due to the merits of high inspection speed and long detecting distance, Ultrasonic Guided Wave(UGW) method has been commonly applied to the on-line maintenance of power transmission line. However, the guided wave propagation in this structure is very complicated, leading to the unfavorable defect localization accuracy. Aiming at this situation, a high precision UGW technique for inspection of local surface defect in power transmission line is proposed. The technique is realized by adopting a novel segmental piezoelectric ring transducer and transducer mounting scheme, combining with the comprehensive characterization of wave propagation and circumferential defect positioning with multiple piezoelectric elements. Firstly, the propagation path of guided waves in the multi-wires of transmission line under the proposed technique condition is investigated experimentally. Next, the wave velocities are calculated by dispersion curves and experiment test respectively, and from comparing of the two results, the guided wave mode propagated in transmission line is confirmed to be F(1,1) mode. Finally, the axial and circumferential positioning of local defective wires in transmission line are both achieved, by using multiple piezoelectric elements to surround the stands and send elastic waves into every single wire. The proposed research can play a role of guiding the development of highly effective UGW method and detecting system for multi-wire transmission line.

  2. A Beacon Transmission Power Control Algorithm Based on Wireless Channel Load Forecasting in VANETs.

    Science.gov (United States)

    Mo, Yuanfu; Yu, Dexin; Song, Jun; Zheng, Kun; Guo, Yajuan

    2015-01-01

    In a vehicular ad hoc network (VANET), the periodic exchange of single-hop status information broadcasts (beacon frames) produces channel loading, which causes channel congestion and induces information conflict problems. To guarantee fairness in beacon transmissions from each node and maximum network connectivity, adjustment of the beacon transmission power is an effective method for reducing and preventing channel congestion. In this study, the primary factors that influence wireless channel loading are selected to construct the KF-BCLF, which is a channel load forecasting algorithm based on a recursive Kalman filter and employs multiple regression equation. By pre-adjusting the transmission power based on the forecasted channel load, the channel load was kept within a predefined range; therefore, channel congestion was prevented. Based on this method, the CLF-BTPC, which is a transmission power control algorithm, is proposed. To verify KF-BCLF algorithm, a traffic survey method that involved the collection of floating car data along a major traffic road in Changchun City is employed. By comparing this forecast with the measured channel loads, the proposed KF-BCLF algorithm was proven to be effective. In addition, the CLF-BTPC algorithm is verified by simulating a section of eight-lane highway and a signal-controlled urban intersection. The results of the two verification process indicate that this distributed CLF-BTPC algorithm can effectively control channel load, prevent channel congestion, and enhance the stability and robustness of wireless beacon transmission in a vehicular network.

  3. A Beacon Transmission Power Control Algorithm Based on Wireless Channel Load Forecasting in VANETs

    Science.gov (United States)

    Mo, Yuanfu; Yu, Dexin; Song, Jun; Zheng, Kun; Guo, Yajuan

    2015-01-01

    In a vehicular ad hoc network (VANET), the periodic exchange of single-hop status information broadcasts (beacon frames) produces channel loading, which causes channel congestion and induces information conflict problems. To guarantee fairness in beacon transmissions from each node and maximum network connectivity, adjustment of the beacon transmission power is an effective method for reducing and preventing channel congestion. In this study, the primary factors that influence wireless channel loading are selected to construct the KF-BCLF, which is a channel load forecasting algorithm based on a recursive Kalman filter and employs multiple regression equation. By pre-adjusting the transmission power based on the forecasted channel load, the channel load was kept within a predefined range; therefore, channel congestion was prevented. Based on this method, the CLF-BTPC, which is a transmission power control algorithm, is proposed. To verify KF-BCLF algorithm, a traffic survey method that involved the collection of floating car data along a major traffic road in Changchun City is employed. By comparing this forecast with the measured channel loads, the proposed KF-BCLF algorithm was proven to be effective. In addition, the CLF-BTPC algorithm is verified by simulating a section of eight-lane highway and a signal-controlled urban intersection. The results of the two verification process indicate that this distributed CLF-BTPC algorithm can effectively control channel load, prevent channel congestion, and enhance the stability and robustness of wireless beacon transmission in a vehicular network. PMID:26571042

  4. A Beacon Transmission Power Control Algorithm Based on Wireless Channel Load Forecasting in VANETs.

    Directory of Open Access Journals (Sweden)

    Yuanfu Mo

    Full Text Available In a vehicular ad hoc network (VANET, the periodic exchange of single-hop status information broadcasts (beacon frames produces channel loading, which causes channel congestion and induces information conflict problems. To guarantee fairness in beacon transmissions from each node and maximum network connectivity, adjustment of the beacon transmission power is an effective method for reducing and preventing channel congestion. In this study, the primary factors that influence wireless channel loading are selected to construct the KF-BCLF, which is a channel load forecasting algorithm based on a recursive Kalman filter and employs multiple regression equation. By pre-adjusting the transmission power based on the forecasted channel load, the channel load was kept within a predefined range; therefore, channel congestion was prevented. Based on this method, the CLF-BTPC, which is a transmission power control algorithm, is proposed. To verify KF-BCLF algorithm, a traffic survey method that involved the collection of floating car data along a major traffic road in Changchun City is employed. By comparing this forecast with the measured channel loads, the proposed KF-BCLF algorithm was proven to be effective. In addition, the CLF-BTPC algorithm is verified by simulating a section of eight-lane highway and a signal-controlled urban intersection. The results of the two verification process indicate that this distributed CLF-BTPC algorithm can effectively control channel load, prevent channel congestion, and enhance the stability and robustness of wireless beacon transmission in a vehicular network.

  5. POSSIBILITY RESEARCH FOR SILICON CARBIDE BULK CRYSTALS GROWTH OF 3C POLYTYPE FOR POWER DEVICES

    Directory of Open Access Journals (Sweden)

    P. V. Bulat

    2014-05-01

    Full Text Available The paper deals with creation of heteropolytypes instrument structures on silicon carbide for power devices not subjected to degradation of electrical properties. The phenomenon of polytypism is considered. Characteristics of different SiC polytypes are given. Information is cited about the causes and effects for degradation of p-n -structures of power devices based on SiC at large density direct current passing. It is shown that hetero-transitions between SiC polytypes may have more structural perfection than hetero-transitions between semiconductors with different chemical nature. Conclusion is made about application prospects for heterostructures based on 3C-SiC polytype in devices of modern power electronics. A brief overview of the possible methods for 3C-SiC single crystals growth is done. A basic scheme for creation of heteropolytype 3C-SiC structures based on substrates of 6H-SiC polytype is suggested.

  6. Bias-field controlled phasing and power combination of gyromagnetic nonlinear transmission lines.

    Science.gov (United States)

    Reale, D V; Bragg, J-W B; Gonsalves, N R; Johnson, J M; Neuber, A A; Dickens, J C; Mankowski, J J

    2014-05-01

    Gyromagnetic Nonlinear Transmission Lines (NLTLs) generate microwaves through the damped gyromagnetic precession of the magnetic moments in ferrimagnetic material, and are thus utilized as compact, solid-state, frequency agile, high power microwave (HPM) sources. The output frequency of a NLTL can be adjusted by control of the externally applied bias field and incident voltage pulse without physical alteration to the structure of the device. This property provides a frequency tuning capability not seen in many conventional e-beam based HPM sources. The NLTLs developed and tested are mesoband sources capable of generating MW power levels in the L, S, and C bands of the microwave spectrum. For an individual NLTL the output power at a given frequency is determined by several factors including the intrinsic properties of the ferrimagnetic material and the transmission line structure. Hence, if higher power levels are to be achieved, it is necessary to combine the outputs of multiple NLTLs. This can be accomplished in free space using antennas or in a transmission line via a power combiner. Using a bias-field controlled delay, a transient, high voltage, coaxial, three port, power combiner was designed and tested. Experimental results are compared with the results of a transient COMSOL simulation to evaluate combiner performance.

  7. Power transfer capability assessment of transmission interfaces with SVC and load shedding systems

    Energy Technology Data Exchange (ETDEWEB)

    Pavlovsky, V. [DMCC-Engineering, Kiev (Ukraine). Inst. of Electrodynamics; Dolzhenitsa, Y. [DMCC Engineering, Kiev (Ukraine); Ushapovskiy, K. [National Power Co. Ukrenergo, Kiev (Ukraine)

    2009-07-01

    As a result of deregulation in the power industry, energy trade and markets are pushing transmission system operators to operate their systems closer to the edge of the power transfer capability. Voltage instability and inadequate reactive power support of generators is a key factor in most major outages around the world. The ideal way to control power systems is to avoid emergencies by reliable planning and secure operation of power systems. Therefore, the accurate calculation of the power transfer capability of transmission interfaces is an important task on the planning and operation stages. This paper discussed the issue of transfer capability assessment and monitoring for interfaces with static var compensator (SVC) and load shedding schemes. It also proposed a special measure, a distance to voltage instability point, to monitor transfer capability on-line. The distance may be observed by measurement of SVC output. The paper considered the problem of optimal SVC size selection and a new approach was proposed based on P-V curves analysis. The paper discussed the problem formulation and proposed approach. A case was also presented in order to demonstrate the proposed approach on the IPS Ukraine-Crimea interface. It was concluded that the proposed approach allows the optimal rating of SVC for increasing transfers capability of transmission corridors. 12 refs., 9 figs.

  8. Safety awareness educational topics for the construction of power transmission systems with smart grid technologies

    Directory of Open Access Journals (Sweden)

    Bryan Hubbard

    2013-09-01

    Full Text Available Power transmission facilities in the U.S. are undergoing a transformation due to the increased use of distributed generation sources such as wind and solar power.  The current power grid system is also antiquated and in need of substantial retrofits to make it more efficient and reliable.  The new energy transmission system being designed and built to optimize power delivery is known as “Smart Grid”.  The increased activity in the construction of power transmission facilities and installation of new technologies into the current power system raises potential safety concerns.  Existing construction management curriculum may include general information about safety training, but does not typically include information about this specialized sector.  The objective of this study was to work with industry to identify key safety topics appropriate for inclusion in an introductory industrial construction course.  Results of interviews with industry identified numerous hazards that are not typically covered in typical construction curricula.  A joint undergraduate and graduate course in industrial construction was created to address these and additional concepts. A survey of the students was performed to determine the effectiveness of the course and also to determine their thoughts about the smart grid technologies and safety training. Information on electrical system hazards is presented along with results of the student surveys.

  9. POWER FLOW ANALYSIS AND APPLICATION SIMULATION OF ELECTROMAGNETIC CONTINUOUSLY VARIABLE TRANSMISSION

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    With the structure of two air gaps and two rotors, the electromagnetic continuously variable transmission(EMCVT) is a novel power-split continuously variable transmission(CVT). There are two kinds of power flowing through the EMCVT, one is mechanical power and the other is electric power. In the mean time, there are three power ports in the EMCVT, one is the outer rotor named mechanical power port and the other two are the inner rotor and the stator named electric power ports. The mechanical power port is connected to the driving wheels through the final gear and the electric ports are connected to the batteries through the transducers. The two kinds of power are coupled on the outer rotor of the EMCVT. The EMCVT can be equipped on the conventional vehicle being regarded as the CVT and it also can be equipped on the hybrid electric vehicle(HEV) as the multi-energy sources assembly. The power flows of these two kinds of applications are analysed. The back electromotive force(EMF) equations are illatively studied and so the dynamic mathematic model is theorized. In order to certify the feasibility of the above theories, three simulations are carried out in allusion to the above two kinds of mentioned applications of the EMCVT and a five speed automatic transmission(AT) vehicle. The simulation results illustrate that the efficiency of the EMCVT vehicles is higher than that of the AT vehicle owed to the optimized operation area of the engine. Hence the fuel consumption of the EMCVT vehicles is knock-down.

  10. Effects of Scandinavian hydro power on storage needs in a fully renewable European power system for various transmission capacity scenarios

    Science.gov (United States)

    Kies, Alexander; Nag, Kabitri; von Bremen, Lueder; Lorenz, Elke; Heinemann, Detlev

    2015-04-01

    The penetration of renewable energies in the European power system has increased in the last decades (23.5% share of renewables in the gross electricity consumption of the EU-28 in 2012) and is expected to increase further up to very high shares close to 100%. Planning and organizing this European energy transition towards sustainable power sources will be one of the major challenges of the 21st century. It is very likely that in a fully renewable European power system wind and photovoltaics (pv) will contribute the largest shares to the generation mix followed by hydro power. However, feed-in from wind and pv is due to the weather dependant nature of their resources fluctuating and non-controllable. To match generation and consumption several solutions and their combinations were proposed like very high backup-capacities of conventional power generation (e.g. fossile or nuclear), storages or the extension of the transmission grid. Apart from those options hydro power can be used to counterbalance fluctuating wind and pv generation to some extent. In this work we investigate the effects of hydro power from Norway and Sweden on residual storage needs in Europe depending on the overlaying grid scenario. High temporally and spatially resolved weather data with a spatial resolution of 7 x 7 km and a temporal resolution of 1 hour was used to model the feed-in from wind and pv for 34 investigated European countries for the years 2003-2012. Inflow into hydro storages and generation by run-of-river power plants were computed from ERA-Interim reanalysis runoff data at a spatial resolution of 0.75° x 0.75° and a daily temporal resolution. Power flows in a simplified transmission grid connecting the 34 European countries were modelled minimizing dissipation using a DC-flow approximation. Previous work has shown that hydro power, namely in Norway and Sweden, can reduce storage needs in a renewable European power system by a large extent. A 15% share of hydro power in Europe

  11. Power line maintenance information system using low-power radio data transmission. Shodenryoku musen denso wo riyoshita sodensen hoshu joho system

    Energy Technology Data Exchange (ETDEWEB)

    Kanemaru, K.; Matsubara, R.; Kaito, J.; Toyota, S. (Hitachi Cable, Ltd., Tokyo (Japan))

    1994-05-20

    Currently in the major power transmission line, a composite fiber optic overhead ground wire (OPGW) is installed, and it is being made the best use as an information transmission line. When the various maintenance informations on the transmission lines can be collected and transmitted by utilizing this OPGW, there will be the benefits that an effective system for the maintenance work of the transmission lines can be constructed, the informations, which could not be obtained by a conventional patrol and tour inspection so far, could be all the time acquired highly accurately and more rapidly. In this report by considering a use of the radio transmission together with OPGW transmission, in order to solve the constraints on an information transmission in a power transmission line maintenance system by utilizing OPGW, the concrete radio transmission systems were proposed about each of interpolation method of the sensor signal transmission method and the OPGW data transmission system. Especially as for the sensor signal system, it was shown that, as a result of the quantitative investigation of a transmission efficiency taking account of the hidden terminal problems, an interpolating data transmission system through a low-power radio combined the slotted transmission timing with the carrier sensed multiple access (CSMA) system was superior. 8 refs., 7 figs., 6 tabs.

  12. Development of Wireless Techniques in Data and Power Transmission - Application for Particle Physics Detectors

    CERN Document Server

    Brenner, R; Dehos, C; De Lurgio, P; Djurcic, Z; Drake, G; Gimenez, J L Gonzalez; Gustafsson, L; Kim, D W; Locci, E; Roehrich, D; Schoening, A; Siligaris, A; Soltveit, H K; Ullaland, K; Vincent, P; Wiednert, D; Yang, S

    2015-01-01

    Wireless techniques have developed extremely fast over the last decade and using them for data and power transmission in particle physics detectors is not science- fiction any more. During the last years several research groups have independently thought of making it a reality. Wireless techniques became a mature field for research and new developments might have impact on future particle physics experiments. The Instrumentation Frontier was set up as a part of the SnowMass 2013 Community Summer Study [1] to examine the instrumentation R&D for the particle physics research over the coming decades: {\\guillemotleft} To succeed we need to make technical and scientific innovation a priority in the field {\\guillemotright}. Wireless data transmission was identified as one of the innovations that could revolutionize the transmission of data out of the detector. Power delivery was another challenge mentioned in the same report. We propose a collaboration to identify the specific needs of different projects that m...

  13. Coal Transportation and Power Transmission%浅议输煤与输电问题

    Institute of Scientific and Technical Information of China (English)

    潘家铮

    2011-01-01

    paper looks into details of China's uneven geographical distribution of the primary energy, and the disparity of economic development among different regions, and deals with comparative advantages between coal transportation and power transmission. Both coal transportation and power transmission issues should be studied at a high level according to the country's basic conditions; and power grids should be regarded as an integral part of the comprehensive transportation system of the country; and the relationship between coal transportation and power transmission should be complementary rather than zero sum. The tension of coal transportation will remain in China in a long time, therefore it takes long distance power transmission to alleviate it. The environment capacity in the developed regions makes it impossible to add more coalfired power plants, and utilization of large-scaled hydropower and wind power calls for long -distance power transmission.Considering all these conditions, the state should balance and coordinate all the players in the energy sector, and make policies based on the actual situations, and make full use of high technologies, and lay balanced stresses on coal transportation and power transmission in the hope to realize the overall optimization of the transportation system in the country.%全面深入阐述了在我国一次能源资源地理分布很不均匀,与全国各地区的经济发展情况不匹配的国情下,输煤与输电何者更优的问题:输煤输电问题应根据国情在高层次上加以综合研究,电网已是综合运输体系中的组成部分,输煤输电不是零和关系而是相辅相成的,我国煤运紧张局面将长期存在,需发展远距离输电协助缓解,发达地区的环境容量不允许无限制增建煤电厂.大水电、大风电等能源的利用有赖于远距离输电.要通过建设坑口煤电基地扶植资源输出地区的发展.因此,国家应统筹协调,因地制宜,利用高新科

  14. Power consumption analysis of constant bit rate data transmission over 3G mobile wireless networks

    DEFF Research Database (Denmark)

    Wang, Le; Ukhanova, Ann; Belyaev, Evgeny

    2011-01-01

    This paper presents the analysis of the power consumption of data transmission with constant bit rate over 3G mobile wireless networks. Our work includes the description of the transition state machine in 3G networks, followed by the detailed energy consumption analysis and measurement results...

  15. Analysis of Multipath MANET Routing Protocols under Variable Range Transmission Power

    Directory of Open Access Journals (Sweden)

    V.Lalitha

    2013-03-01

    Full Text Available A Mobile Ad Hoc Network is a collection of mobile wireless nodes connected together to form a dynamic network without the need for any fixed infrastructure. This dynamic and unpredictable nature of MANETs requires multi-path routing. In multipath routing multiple paths are established between a source and destination pair of nodes. Multi-path routing provides several benefits such as fault-tolerance, load balancing etc. Transmission power of nodes plays an important role in MANET communication. Now, let us assume that each node can dynamically control the transmission power it uses independently of other nodes. The objective of this work is to study the behavior and performance of the two multi-path MANET routing protocols with respect to different transmission range/power of individual nodes of the network. We have selected Ad Hoc On-Demand Multi-path Distance Vector (AOMDV Routing Protocol and Multi-path Dynamic Address Routing (MDART Protocol for this study. We will analyze the impact of increase in transmission range/power of individual nodes on the performance of these multi-path MANET routing protocols.

  16. Non-Orthogonal Random Access in MIMO Cognitive Radio Networks: Beamforming, Power Allocation, and Opportunistic Transmission.

    Science.gov (United States)

    Lin, Huifa; Shin, Won-Yong

    2017-01-01

    We study secondary random access in multi-input multi-output cognitive radio networks, where a slotted ALOHA-type protocol and successive interference cancellation are used. We first introduce three types of transmit beamforming performed by secondary users, where multiple antennas are used to suppress the interference at the primary base station and/or to increase the received signal power at the secondary base station. Then, we show a simple decentralized power allocation along with the equivalent single-antenna conversion. To exploit the multiuser diversity gain, an opportunistic transmission protocol is proposed, where the secondary users generating less interference are opportunistically selected, resulting in a further reduction of the interference temperature. The proposed methods are validated via computer simulations. Numerical results show that increasing the number of transmit antennas can greatly reduce the interference temperature, while increasing the number of receive antennas leads to a reduction of the total transmit power. Optimal parameter values of the opportunistic transmission protocol are examined according to three types of beamforming and different antenna configurations, in terms of maximizing the cognitive transmission capacity. All the beamforming, decentralized power allocation, and opportunistic transmission protocol are performed by the secondary users in a decentralized manner, thus resulting in an easy implementation in practice.

  17. Link-state-estimation-based transmission power control in wireless body area networks.

    Science.gov (United States)

    Kim, Seungku; Eom, Doo-Seop

    2014-07-01

    This paper presents a novel transmission power control protocol to extend the lifetime of sensor nodes and to increase the link reliability in wireless body area networks (WBANs). We first experimentally investigate the properties of the link states using the received signal strength indicator (RSSI). We then propose a practical transmission power control protocol based on both short- and long-term link-state estimations. Both the short- and long-term link-state estimations enable the transceiver to adapt the transmission power level and target the RSSI threshold range, respectively, to simultaneously satisfy the requirements of energy efficiency and link reliability. Finally, the performance of the proposed protocol is experimentally evaluated in two experimental scenarios-body posture change and dynamic body motion-and compared with the typical WBAN transmission power control protocols, a real-time reactive scheme, and a dynamic postural position inference mechanism. From the experimental results, it is found that the proposed protocol increases the lifetime of the sensor nodes by a maximum of 9.86% and enhances the link reliability by reducing the packet loss by a maximum of 3.02%.

  18. Re-Configurable Antenna & Transmission Power for Location Aware MANET Routing with Multiple Objective Optimization

    Directory of Open Access Journals (Sweden)

    Sanjaya Gajurel

    2008-03-01

    Full Text Available In this paper we develop a Directional Antenna Multi-path Location Aided Routing (DA-MLAR scheme with On Demand Transmission Power (ODTP support. The routing approach is based on multiple objectives. DAMLAR is a reactive routing protocol that minimizes the protocol overhead of other reactive routing protocols. DAMLAR also improves the packet delivery ratio and end-toend delay. The targeted application contexts include MANET with energy awareness, and communications in space networks, where efficient and reliable packet delivery is very challenging due to the high bit error rate, intermittent connectivity, limited bandwidth, and energy. By using different transmission power based on the calculated distance from the current sender node to the destination node or the next hop node, DA-MLAR-ODTP gets the best of the directional and omni-directional modes. Compared to DA-MLAR, on demand transmission power mode further improves the packet delivery ratio by up to 37% and dwindles end-to-end delay by up to 57% with approximately the same amount of energy consumption. The multiple objective optimization is based on using a Normalized Weighted Additive Utility Function (NWAUF approach that shows comparison of different objective performances with and without on demand transmission power capability. Simulation experiments were conducted. They show that is the developed technique strengthens the reliability of communication systems for given targeted objectives.

  19. United Kingdom's experience. [Power system transmission open access

    Energy Technology Data Exchange (ETDEWEB)

    Drummond, S.M.

    1994-12-01

    This is a presentation of the United Kingdom's experience with power transmission open access. The topics of the presentation include the objectives of changing, commercial arrangements and economic drivers, long term effects, the effects of moving to a more competitive environment, and factors affecting open access such as political climate and market regulation.

  20. Price and Volatility Transmission and Market Power in the German Fresh Pork Supply Chain

    NARCIS (Netherlands)

    Assefa, Tsion Taye; Meuwissen, Miranda P.M.; Gardebroek, Koos; Oude Lansink, Alfons G.J.M.

    2017-01-01

    We investigate the relationship between the transmission of price volatility and market power in the German fresh pork supply chain. We use a theoretical model underpinning this relationship followed by an empirical application that uses monthly farm, slaughterhouse and retail pork price data for

  1. Microwave Power Transmission Using Electromagnetic Coupling of Open-Ring Resonators

    Science.gov (United States)

    2012-11-01

    Ao, I. Awai and Y. Ohno, “Wireless Inter-Chip Signal Transmission by Electromagnetic Coupling of Open-Ring Resonators,” Japanese Journal of Applied Physics , vol...Y Hu, H. Kawai, N. Shinohara, N. Niwa, and Y. Ohno, : GaN Schottky Diodes for Microwave Power Rectification, Japanese Journal of Applied Physics , Vol

  2. Comprehensive evaluation of power grid enterprises' credit rating under the reform of transmission and distribution price

    Science.gov (United States)

    Wang, Yongli; Wang, Gang; Zuo, Yi; Fan, Lisha; Wei, Jiaxiang

    2017-03-01

    On March 15, 2015, the central office issued the "Opinions on Further Deepening the Reform of Electric Power System" (in the 2015 No. 9). This policy marks the central government officially opened a new round of electricity reform. As a programmatic document under the new situation to comprehensively promote the reform of the power system, No. 9 document will be approved as a separate transmission and distribution of electricity prices, which is the first task of promoting the reform of the power system. Grid tariff reform is not only the transmission and distribution price of a separate approval, more of the grid company input-output relationship and many other aspects of deep-level adjustments. Under the background of the reform of the transmission and distribution price, the main factors affecting the input-output relationship, such as the main business, electricity pricing, and investment approval, financial accounting and so on, have changed significantly. The paper designed the comprehensive evaluation index system of power grid enterprises' credit rating under the reform of transmission and distribution price to reduce the impact of the reform on the company's international rating results and the ability to raise funds.

  3. Impact of power allocation strategies in long-haul few-mode fiber transmission systems.

    Science.gov (United States)

    Rafique, Danish; Sygletos, Stylianos; Ellis, Andrew D

    2013-05-06

    We report for the first time on the limitations in the operational power range of few-mode fiber based transmission systems, employing 28 Gbaud quadrature phase shift keying transponders, over 1,600 km. It is demonstrated that if an additional mode is used on a preexisting few-mode transmission link, and allowed to optimize its performance, it will have a significant impact on the pre-existing mode. In particular, we show that for low mode coupling strengths (weak coupling regime), the newly added variable power mode does not considerably impact the fixed power existing mode, with performance penalties less than 2dB (in Q-factor). On the other hand, as mode coupling strength is increased (strong coupling regime), the individual launch power optimization significantly degrades the system performance, with penalties up to ~6 dB. Our results further suggest that mutual power optimization, of both fixed power and variable power modes, reduces power allocation related penalties to less than 3 dB, for any given coupling strength, for both high and low differential mode delays.

  4. Transmission Lines or Poles, Electric, Major power transmission lines. Extracted from 1992 U.S. Census Bureau TIGER/Line files., Published in 1992, Arizona State Land Department.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Transmission Lines or Poles, Electric dataset, was produced all or in part from Road Centerline Files information as of 1992. It is described as 'Major power...

  5. Influence of the drawbar pull over the power flux within the automotive transmissions

    Science.gov (United States)

    Truţă, M.; Marinescu, M.; Vînturiş, V.

    2016-08-01

    This paper performs an analysis of the drawbar pull influence over the power flow within the automotive transmissions. First part of the work presents a serial of theoretical approaches with respect to the analyzed elements. Second part of the paper reveals the vehicle's instrumentation to achieve the experimental data and some of the research results as well. The final part of the paper draws a series of conclusions with respect to mode the power loop's magnitude is influenced by the general drawbar pull. Last, but not least, technical solutions are introduced to decrease the power loops and contribute to the fuel savings.

  6. Ice and snow effect on wireless power transmission by magnetic resonant coupling

    Science.gov (United States)

    Shun, Endo; Baba, Ryouichi; Furuta, Kenta; Nunokawa, Kazuki; Takahashi, Wataru; Maruyama, Tamami

    2017-07-01

    In areas where snow has accumulated, it is necessary to consider the effect of snow on the wireless power transmission (WPT) system. This study focused on the variation in power flow through the WPT system due to thickness variation of ice and the dielectric constant of snow. A measurement system was created and power flow measured as S-parameters to study snow and ice influence. It was found that ice cover caused the WPT coils to detune, which when asymmetric caused high losses. However, completely filling the space between the coils with ice caused equal frequency shifts in both coils allowing the WPT system to operate at the shifted frequency.

  7. Effect of side transmission of power ultrasonic on structure of AZ81 magnesium alloy

    Institute of Scientific and Technical Information of China (English)

    张海波; 翟启杰; 戚飞鹏; 龚永勇

    2004-01-01

    In order to promote the application of power ultrasonic in metallurgic industry, ultrasonic vibration is introduced from the side of AZ81 ingot by adopting the automatic-attracting amplitude transformer horn which has independently been designed and produced, and the effect of the side transmission of ultrasonic on the solidification structure of metal is investigated. The results show that under this experimental condition, power ultrasonic can greatly improve the solidification structure of AZ81 magnesium alloy. Compared with the traditional modification methods in which inoculants are added into melt, power ultrasonic has a better performance. The present research gives us a new way for the application of ultrasonic refinement technique.

  8. Power Flow Analysis of HVAC and HVDC Transmission Systems for Offshore WindParks

    DEFF Research Database (Denmark)

    da Silva, Filipe Miguel Faria; Castro, Rui

    2009-01-01

    As the onshore wind resource is running shorter, wind power promoters are paying attention to the offshore resources. As in most cases there is no load offshore, wind power must be transmitted to the main land. To do so, two options are available: HVAC and HVDC transmission systems. In this paper...... that HVAC solution is limited by the distance to shore and by the wind transmitted power. HVDC options do not show these limitations, but are more expensive and more delicate to deal with, because there is a lack of operational experience, so far....

  9. Optical sensing in high voltage transmission lines using power over fiber and free space optics

    Science.gov (United States)

    Rosolem, João Batista; Bassan, Fabio Renato; Penze, Rivael Strobel; Leonardi, Ariovaldo Antonio; Fracarolli, João Paulo Vicentini; Floridia, Claudio

    2015-12-01

    In this work we propose the use of power over fiber (PoF) and free space optics (FSO) techniques to powering and receive signals from an electrical current sensor placed at high voltage potential using a pair of optical collimators. The technique evaluation was performed in a laboratorial prototype using 62.5/125 μm multimode fiber to study the sensitivity of the optical alignment and the influence of the collimation process in the sensing system wavelengths: data communication (1310 nm) and powering (830 nm). The collimators were installed in a rigid electric insulator in order to maintain the stability of transmission.

  10. Multiobjective Transmission Network Planning considering the Uncertainty and Correlation of Wind Power

    Directory of Open Access Journals (Sweden)

    Yuan Hu

    2014-01-01

    Full Text Available In order to consider the uncertainty and correlation of wind power in multiobjective transmission network expansion planning (TNEP, this paper presents an extended point-estimation method to calculate the probabilistic power flow, based on which the correlative power outputs of wind farm are sampled and the uncertain multiobjective transmission network planning model is transformed into a solvable deterministic model. A modified epsilon multiobjective evolutionary algorithm is used to solve the above model and a well-distributed Pareto front is achieved, and then the final planning scheme can be obtained from the set of nondominated solutions by a fuzzy satisfied method. The proposed method only needs the first four statistical moments and correlation coefficients of the output power of wind farms as input information; the modeling of wind power is more precise by considering the correlation between wind farms, and it can be easily combined with the multiobjective transmission network planning model. Besides, as the self-adaptive probabilities of crossover and mutation are adopted, the global search capabilities of the proposed algorithm can be significantly improved while the probability of being stuck in the local optimum is effectively reduced. The accuracy and efficiency of the proposed method are validated by IEEE 24 as well as a real system.

  11. Power cables and transmission lines. A special issue; Kabels en lijnen. Special

    Energy Technology Data Exchange (ETDEWEB)

    Franken, B. [Vakgroep Electrische Energiesystemen, Technische Universiteit Eindhoven, Eindhoven (Netherlands); Hendriks Boers, M.H.A.J.; Bloemhof, G.A.; Pultrum, E.; Van der Wey, A.H.; Cremers, R. [KEMA Transport en Distributie, Arnhem (Netherlands); Rogier, J. [Dienst Methoden - Technische Assistentie, Departement Netten, Tractebel, Brussels (Belgium); Wiersma, J.A. [Regionale Energiemaatschappij Utrecht REMU, Utrecht (Netherlands); Birkhoelzer, W.A.; Lommen, P.P.C. [MEGA Limburg, Maastricht (Netherlands); Van Oirsouw, P. [KEMA Procesautomatisering en Informatietechnologie, Arnhem (Netherlands); Emous, K. [ed.

    1996-10-01

    In 8 articles several aspects with regard to cables and lines, applied in the electric power industry, are discussed. In the first article attention is paid to a new detection method for weak spots in cables. In the second article it is discussed that loading cables in a power distribution network more heavily has an impact on the reliability of the power supply. In article three the reliability of systems to protect the network against power failures is dealt with. The concept of a KEMA-developed computer program (PRORANK or Protection Reliability Analysis KEMA) is described and illustrated by two case studies. In article four the activities of CIGRE to realize a standard format for a database to maintaine and manage above-ground transmission lines are outlined. In article five the most important results and conclusions of a CIGRE working group on high-voltage cables and high-voltage lines are summarized. In the sixth article the developments with regard to discharge measurements for the diagnosis of cables are discussed, as well as the option of distributed optical measurement in high-voltage transmission cables. In article seven the so-called Power-Donut{sup TM} system is described by which the conductor temperature in high-voltage transmission lines can be determined. In the last article a KEMA-developed computer program (GAIA) for safety grounding analysis is discussed

  12. Development of high-power and high-energy 2 µm bulk solid-state lasers and amplifiers

    CSIR Research Space (South Africa)

    Koen, W

    2016-04-01

    Full Text Available with the proliferation of both neodymium solid-state lasers as well as diode lasers. Mid-infrared laser sources in the 2-5 µm region, however, lagged behind in both power and availability. Even though they were demonstrated soon after the first laser was developed... for aircraft from anti-aircraft missiles. Mid-infrared lasers may also be used as target designators and for range finding. Free space communication is also possible, provided the laser wavelength coincides with an atmospheric transmission window, as shown...

  13. A low-power high-speed ultra-wideband pulse radio transmission system.

    Science.gov (United States)

    Wei Tang; Culurciello, E

    2009-10-01

    We present a low-power high-speed ultra-wideband (UWB) transmitter with a wireless transmission test platform. The system is specifically designed for low-power high-speed wireless implantable biosensors. The integrated transmitter consists of a compact pulse generator and a modulator. The circuit is fabricated in the 0.5-mum silicon-on-sapphire process and occupies 420 mum times 420 mum silicon area. The transmitter is capable of generating pulses with 1-ns width and the pulse rate can be controlled between 90 MHz and 270 MHz. We built a demonstration/testing system for the transmitter. The transmitter achieves a 14-Mb/s data rate. With 50% duty cycle data, the power consumption of the chip is between 10 mW and 21 mW when the transmission distance is from 3.2 to 4 m. The core circuit size is 70 mum times 130 mum.

  14. Accurate one-end fault location for overhead transmission lines in interconnected power systems

    Energy Technology Data Exchange (ETDEWEB)

    Eisa, Amir A.A.; Ramar, K. [Faculty of Engineering, Multimedia University, 63100 Cyberjaya (Malaysia)

    2010-06-15

    This paper presents a new one-end fault location method for overhead transmission lines embedded in a general n-bus interconnected power system. High accuracy in fault location is achieved by using both an accurate distributed parameters model for the faulted transmission line, and a two-bus Thevenin equivalent network model for the power system that accurately accounts for its interconnectivity. The method has been tested using transient fault data obtained from PSCAD/EMTDC simulations of an 11-bus interconnected power system. The results obtained indicate that the method is capable of estimating the fault distance with high accuracy for various fault conditions. They also indicate that method is sensitive to errors in the value of the local bus impedance, but is insensitive to errors in the value of the remote bus impedance. (author)

  15. Development of a PLC modem for data transmission over a PWM power supply

    Science.gov (United States)

    Batard, Christophe; Ginot, Nicolas; Mannah, Marc Anthony; Millet, Christophe; Poitiers, Frédéric

    2014-04-01

    In variable-speed electrical drive and online conditioning monitoring, a feedback loop is required in order to transmit the sensor information from the motor to the controller close to the inverter. Additional cabling is used for signalling. This extra cabling has a significant cost and data transmission may not be reliable. Thus, the use of power line communication (PLC) technology to transmit data in motor drive application is quite interesting. The use of a PLC modem dedicated to the home network in a three-phase inverter-fed motor power cable does not work. Therefore, specific coupling interfaces are developed to transmit data through a pulse-width modulated power supply. Laboratory tests have shown that the couplers are operating properly. They ensure reliable data transmission in a motor drive application.

  16. QoE-based transmission strategies for multi-user wireless information and power transfer

    Directory of Open Access Journals (Sweden)

    Taehun Jung

    2015-12-01

    Full Text Available One solution to the problem of supplying energy to wireless networks is wireless power transfer. One such technology–electromagnetic radiation enabled wireless power transfer–will change traditional wireless networks. In this paper, we investigate a transmission strategy for multi-user wireless information and power transfer. We consider a multi-user multiple-input multiple-output (MIMO channel that includes one base station (BS and two user terminals (UT consisting of one energy harvesting (EH receiver and one information decoding (ID receiver. Our system provides transmission strategies that can be executed and implemented in practical scenarios. The paper then analyzes the rate–energy (R–E pair of our strategies and compares them to those of the theoretical optimal strategy. We furthermore propose a QoE-based mode selection algorithm by mapping the R–E pair to the utility functions.

  17. Optimal Power Control for Concurrent Transmissions of Location-aware Mobile Cognitive Radio Ad Hoc Networks

    CERN Document Server

    Song, Yi

    2011-01-01

    In a cognitive radio (CR) network, CR users intend to operate over the same spectrum band licensed to legacy networks. A tradeoff exists between protecting the communications in legacy networks and maximizing the throughput of CR transmissions, especially when CR links are unstable due to the mobility of CR users. Because of the non-zero probability of false detection and implementation complexity of spectrum sensing, in this paper, we investigate a sensing-free spectrum sharing scenario for mobile CR ad hoc networks to improve the frequency reuse by incorporating the location awareness capability in CR networks. We propose an optimal power control algorithm for the CR transmitter to maximize the concurrent transmission region of CR users especially in mobile scenarios. Under the proposed power control algorithm, the mobile CR network achieves maximized throughput without causing harmful interference to primary users in the legacy network. Simulation results show that the proposed optimal power control algori...

  18. Systems definition space-based power conversion systems. [for satellite power transmission to earth

    Science.gov (United States)

    1976-01-01

    Potential space-located systems for the generation of electrical power for use on Earth are discussed and include: (1) systems producing electrical power from solar energy; (2) systems producing electrical power from nuclear reactors; and (3) systems for augmenting ground-based solar power plants by orbital sunlight reflectors. Systems (1) and (2) would utilize a microwave beam system to transmit their output to Earth. Configurations implementing these concepts were developed through an optimization process intended to yield the lowest cost for each. A complete program was developed for each concept, identifying required production rates, quantities of launches, required facilities, etc. Each program was costed in order to provide the electric power cost appropriate to each concept.

  19. Transmission Power and Antenna Allocation for Energy-Efficient RF Energy Harvesting Networks with Massive MIMO

    Directory of Open Access Journals (Sweden)

    Yu Min Hwang

    2017-06-01

    Full Text Available The optimum transmission strategy for maximizing energy efficiency (EE of a multi-user massive multiple-input multiple-output (MIMO system in radio frequency energy harvesting networks is investigated. We focus on dynamic time-switching (TS antennas, to avoid the practical problems of power-splitting antennas, such as complex architectures, power loss and signal distortion when splitting the power of the received signal into power for information decoding (ID and energy harvesting (EH. However, since a single TS antenna cannot serve ID and EH simultaneously, the MIMO system is considered in this paper. We thus formulate an EE optimization problem and propose an iterative algorithm as a tractable solution, including an antenna selection strategy to optimally switch each TS antenna between ID mode and EH mode using nonlinear fractional programming and the Lagrange dual method. Further, the problem is solved under practical constraints of maximum transmission power and outage probabilities for a minimum amount of harvested power and rate capacity for each user. Simulation results show that the proposed algorithm is more energy-efficient than that of baseline schemes, and demonstrates the trade-off between the required amount of harvested power and energy efficiency.

  20. Optimal Allocation of Wind Turbines by Considering Transmission Security Constraints and Power System Stability

    Directory of Open Access Journals (Sweden)

    Rodrigo Palma-Behnke

    2013-01-01

    Full Text Available A novel optimization methodology consisting of finding the near optimal location of wind turbines (WTs on a planned transmission network in a secure and cost-effective way is presented on this paper. While minimizing the investment costs of WTs, the algorithm allocates the turbines so that a desired wind power energy-penetration level is reached. The optimization considers both transmission security and power system stability constraints. The results of the optimization provide regulators with a support instrument to give proper signals to WT investors, in order to achieve secure and cost effective wind power network integration. The proposal is especially aimed at countries in the initial stage of wind power development, where the WT network integration process can still be influenced by policy-makers. The proposed methodology is validated with a real power system. Obtained results are compared with those generated from a business-as-usual (BAU scenario, in which the WT network allocation is made according to existing WT projects. The proposed WT network allocation scheme not only reduces the total investment costs associated with a determined wind power energy target, but also improves power system stability.

  1. Optimization of Passive and Active Non-Linear Vibration Mounting Systems Based on Vibratory Power Transmission

    Science.gov (United States)

    Royston, T. J.; Singh, R.

    1996-07-01

    While significant non-linear behavior has been observed in many vibration mounting applications, most design studies are typically based on the concept of linear system theory in terms of force or motion transmissibility. In this paper, an improved analytical strategy is presented for the design optimization of complex, active of passive, non-linear mounting systems. This strategy is built upon the computational Galerkin method of weighted residuals, and incorporates order reduction and numerical continuation in an iterative optimization scheme. The overall dynamic characteristics of the mounting system are considered and vibratory power transmission is minimized via adjustment of mount parameters by using both passive and active means. The method is first applied through a computational example case to the optimization of basic passive and active, non-linear isolation configurations. It is found that either active control or intentionally introduced non-linearity can improve the mount's performance; but a combination of both produces the greatest benefit. Next, a novel experimental, active, non-linear isolation system is studied. The effect of non-linearity on vibratory power transmission and active control are assessed via experimental measurements and the enhanced Galerkin method. Results show how harmonic excitation can result in multiharmonic vibratory power transmission. The proposed optimization strategy offers designers some flexibility in utilizing both passive and active means in combination with linear and non-linear components for improved vibration mounts.

  2. Outage Analysis of Cooperative Transmission with Energy Harvesting Relay: Time Switching versus Power Splitting

    Directory of Open Access Journals (Sweden)

    Guanyao Du

    2015-01-01

    Full Text Available This paper investigates the multiuser transmission network with an energy harvesting (EH cooperative relay, where a source transmits independent information to multiple destinations with the help of an energy constrained relay. The relay can harvest energy from the radio frequency (RF signals transmitted from the source, and it helps the multiuser transmission only by consuming the harvested energy. By adopting the time switching and the power splitting relay receiver architectures, we firstly propose two protocols, the time switching cooperative multiuser transmission (TSCMT protocol and the power splitting cooperative multiuser transmission (PSCMT protocol, to enable the simultaneous information processing and EH at the relay for the system. To evaluate the system performance, we theoretically analyze the system outage probability for the two proposed protocols and then derive explicit expressions for each of them, respectively. Numerical results are provided to demonstrate the accuracy of our analytical results and reveal that compared with traditional noncooperative scheme our proposed protocols are green solutions to offer reliable communication and lower system outage probability without consuming additional energy. In particular, for the same transmit power at the source, the PSCMT protocol is superior to the TSCMT protocol to obtain lower system outage probability.

  3. Design and fabrication of the high-power RF transmission line into the PEFP linac tunnel

    Science.gov (United States)

    Seol, Kyung-Tae; Kwon, Hyeok-Jung; Kim, Han-Sung; Cho, Yong-Sub

    2012-07-01

    The 100-MeV proton linear accelerator (linac) for the Proton Engineering Frontier Project (PEFP) has been developed and will be installed at the Gyeong-ju site. For the linac, a total of 11 sets of RF systems are required, and the waveguide layout was fixed to install high-power RF (HPRF) systems. One of the important interfaces with the building construction is the high-power radio-frequency (HPRF) transmission line embedded in the tunnel, which is used to transmit 1-MW RF power to each cavity in the tunnel. The waveguide section penetrating into the linac tunnel was designed with a bending structure for radiation shielding, and the dependence of its voltage standing-wave ratio (VSWR) on the chamfer length of the bending was calculated. The HPRF transmission line was fabricated into a piece of waveguide to prevent moisture and any foreign debris inside the 2.5-m thick concrete block. Air leakage was checked with a pressure of 0.25 psig of nitrogen gas, and a maximum VSWR of 1.196 was obtained by measuring the vector reflection coefficients with the quarter-wave transmission section. In this paper, the design and the fabrication of the HPRF transmission line into the PEFP linac tunnel are presented.

  4. AC Loss of Ripple Current in Superconducting DC Power Transmission Cable

    Science.gov (United States)

    Yoshitomi, K.; Otabe, E. S.; Vyatkin, V. S.; Kiuchi, M.; Matsushita, T.; Hamabe, M.; Yamaguchi, S.; Inada, R.

    As a method of largely reducing the transmission loss in the electric power grid, superconducting direct current (DC) power transmission cable has been investigated. Using superconducting DC power transmission cables, large amounts of current and energy can be transferred compared to conventional copper cables. In this case, an alternating current (AC) is converted to DC and superposed AC which is known as ripple current, and the energy loss by the ripple current is generated. Therefore it is desired to estimate the energy loss density for the case of DC current and superposed AC current for a design of DC transmission cable system. In this study, the hysteresis loss for DC current of 2 kA rectified from 60 Hz alternating current is calculated using the Bean model, and coupling loss was also estimated. The diameter of the cable was 40 mm. The ripple currents generated by multi-pulse rectifiers, 6-pulse, 12-pulse, and 24-pulse were considered. It is found that the total AC loss including the hysteresis loss and the coupling loss is considerably smaller than the supposed heat loss of 0.5 W/m which is obtained with a newly developed cable.

  5. High voltage bulk GaN-based photoconductive switches for pulsed power applications

    Science.gov (United States)

    Leach, J. H.; Metzger, R.; Preble, E. A.; Evans, K. R.

    2013-03-01

    Switches are at the heart of all pulsed power and directed energy systems, which find utility in a number of applications. At present, those applications requiring the highest power levels tend to employ spark-gap switches, but these suffer from relatively high delay-times (~10-8 sec), significant jitter (variation in delay time), and large size. That said, optically-triggered GaN-based photoconductive semiconductor switches (PCSS) offer a suitably small form factor and are a cost-effective, versatile solution in which delay times and jitter can be extremely short. Furthermore, the optical control of the switch means that they are electrically isolated from the environment and from any other system circuitry, making them immune from electrical noise, eliminating the potential for inadvertent switch triggering. Our recent work shows great promise to extend high-voltage GaN-based extrinsic PCSS state-of-the-art performance in terms of subnanosecond response times, low on-resistance, high current carrying capacity and high blocking voltages. We discuss our recent results in this work.

  6. Using technique vibration diagnostics for assessing the quality of power transmission line supports repairs

    Directory of Open Access Journals (Sweden)

    Cherpakov Aleksander

    2017-01-01

    Full Text Available The considered method for assessing the quality of the repair work to restore the rack supports of transmission lines is based on the method of vibration diagnostics. Power transmission line supports with a symmetrical destruction of the protective layer of concrete in the ground in violation of the construction section were chosen as an object. Finite element modelling package Ansys was used in assessing the quality of repair work. The example of evaluating the quality of repair using the relative adhesion defective area design criteria in the analysis of natural vibration frequencies is given.

  7. Power flow tracing based method for allocation of transmission service cost to transactions

    Institute of Scientific and Technical Information of China (English)

    李卫东; 刘娆; 魏立明

    2004-01-01

    Based on the concepts of objective fact and subjeetive desire proposed in this paper, the problens that exist in the nodal injections-based and transaction-based transmission service allocation scheme are pointed out. To get around the problems above, a novel transmission service allocation scheme is proposed which considers the power flow distribution and the transaetion impact on the system simultaneously so that the issues of "Cross-subsidies" and "Counter flow" can be avoided. The principle of the scheme is illustrated using two simple networks with 7 cases. The results show that the proposed scheme can satisfy the properties necessary for the development and growth of the electricity market.

  8. Present and future techniques for automated power facility maintenance. Maintenance techniques for power transmission facilities

    Energy Technology Data Exchange (ETDEWEB)

    Taneichi, Takeshi; Takada, Nobuyuki

    1988-09-15

    Present automated information acquisition system of the maintenance services for overhead transmission lines is outlined, and in addition, the fault localization system with optical fiber composite overhead ground wires (OPGW) and fault locators, automated ice or snow coating monitoring system, and transmission tower site monitoring system are presented. As maintenance equipment, the automatic fitting equipment of low-snow coating rings, and remote measuring with a helicopter are presented. More applications of OPGW and more uses of robots for the maintenance services are pointed out as future trends. Present automated maintenance services for underground transmission lines are outlined, and in addition, the communication system of the oil leakage information of OF cables or failure information of cooling facilities, the automatic operation and monitoring system for cooling facilities, and the duct monitoring system to collect and montor operation, failure and control imformation are presented. The use of inspection robots and a computerized total facility management system are pointed out as future trends. (7 figs, 3 tabs, 3 refs)

  9. Study on Wireless Power Transmission for Gastrointestinal Microsystems Based on Inductive Coupling

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Wireless power transmission based on inductive coupling for remotely implanted micro devices has been considered in this paper. The receiving coil, integrated in microsystems and the external transmitting coil compose a loosely coupled transformer. The coupling coefficient was calculated and measured on spacing misalignments. The geometric size of transmitting coil was analyzed for the target of remotely delivering power. The received power was maximized by choosing appropriate value of frequency, tuning capacitance and the load resistance. A conventional full bridge rectifier circuit was employed to convert ac to dc voltage. The Received dc power was up to 160 mW with a transmitting voltage of 5 Vrms when the receiving coil was placed at the center of the transmitting coil.This may meet the requirement of some microsystems for high power over a long time.

  10. Optimal design of lattice metal constructions of overhead power transmission lines

    Directory of Open Access Journals (Sweden)

    Pustovgar Andrey

    2016-01-01

    Full Text Available The article presents a new concept of design of power lines which allowed us to develop new unified power transmission supports, efficient and reliable ones. For the first time, a method of optimum design of overhead power lines has been developed which considered the power line as a united structural system, the relief, the atmospheric and climatic conditions, the environment pollution, the efficiency requirements, the technological and operational expenditures. The article describes the changes introduced into the requirements for the dimensions and parameters of grid metal works with the minimum mass. The optimum design, the computer-aided assembly process and the use of advanced technologies guarantee the reduction of the construction period and the increase in the maintenance period of power lines.

  11. Wireless Power Transmission Technology Introduction%无线能量传输技术概述

    Institute of Scientific and Technical Information of China (English)

    肖桂良

    2014-01-01

    本文主要介绍无线能量传输技术,无线能量传输技术大致分为三类:感应式无线能量传输、耦合谐振式无线能量传输、电波辐射式无线能量传输,分别讲述了各技术的特点,并对各技术的研究发展与应用进行了详细的讲述。%This paper describes the wireless power transmission technology, wireless power transfer technology is broadly divided into three categories: inductive wireless power transfer, coupled resonant wireless power transfer, wireless power transfer radiation waves , which is about the characteristics of each technology, and development and application of each technique are described in detail in.

  12. 77 FR 41369 - Dairyland Power Cooperative: CapX 2020 Hampton-Rochester-La Crosse Transmission Line Project

    Science.gov (United States)

    2012-07-13

    ... Rural Utilities Service Dairyland Power Cooperative: CapX 2020 Hampton-Rochester-La Crosse Transmission... requirements related to providing financial assistance to Dairyland Power Cooperative (Dairyland) for its share in the construction of a proposed 345-kilovolt (kV) transmission line and associated...

  13. 77 FR 2268 - Dairyland Power Cooperative: CapX 2020 Hampton-Rochester-La Crosse Transmission Line Project

    Science.gov (United States)

    2012-01-17

    ... Rural Utilities Service Dairyland Power Cooperative: CapX 2020 Hampton-Rochester-La Crosse Transmission... related to providing financial assistance to Dairyland Power Cooperative (Dairyland) for its share in the construction of a proposed 345-kilovolt (kV) transmission line and associated infrastructure between...

  14. 75 FR 75170 - Minnkota Power Cooperative, Inc.: Bemidji to Grand Rapids 230 kV Transmission Line Project

    Science.gov (United States)

    2010-12-02

    ... Rural Utilities Service Minnkota Power Cooperative, Inc.: Bemidji to Grand Rapids 230 kV Transmission... to Grand Rapids 230 kV Transmission Line Project (Project) in Beltrami, Hubbard, Itasca, and Cass... alternatives to the Project proposed by Minnkota Power Cooperative, Inc. (Minnkota) for RUS financing...

  15. 76 FR 78235 - Dairyland Power Cooperative: CapX 2020 Hampton-Rochester-La Crosse Transmission Line Project

    Science.gov (United States)

    2011-12-16

    ... Rural Utilities Service Dairyland Power Cooperative: CapX 2020 Hampton-Rochester-La Crosse Transmission... assistance to Dairyland Power Cooperative (Dairyland) for its share in the construction of a proposed 345-kilovolt (kV) transmission line and associated infrastructure between Hampton, Minnesota and the La...

  16. In-Containment Signal Conditioning and Transmission via Power Lines within High Dose Rate Areas of Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, Steffen; Weigel, Robert; Koelpin, Alexander [Institute for Electronics Engineering, University of Erlangen-Nuremberg, Cauerstr. 9, 91058 Erlangen (Germany); Dennerlein, Juergen; Janke, Iryna; Weber, Johannes [AREVA GmbH, Paul-Gossen-Str. 100, 91052 Erlangen (Germany)

    2015-07-01

    Signal conditioning and transmission for sensor systems and networks within the containment of nuclear power plants (NPPs) still poses a challenge to engineers, particularly in the case of equipment upgrades for existing plants, temporary measurements, decommissioning of plants, but also for new builds. This paper presents an innovative method for efficient and cost-effective instrumentation within high dose rate areas inside the containment. A transmitter-receiver topology is proposed that allows simultaneous, unidirectional point-to-point transmission of multiple sensor signals by superimposing them on existing AC or DC power supply cables using power line communication (PLC) technology. Thereby the need for costly installation of additional cables and containment penetrations is eliminated. Based on commercial off-the-shelf (COTS) electronic parts, a radiation hard transmitter is designed to operate in harsh environment within the containment during full plant operation. Hardware modularity of the transmitter allows application specific tradeoffs between redundancy and channel bandwidth. At receiver side in non-radiated areas, signals are extracted from the power line, demodulated, and provided either in analog or digital output format. Laboratory qualification tests and field test results within a boiling water reactor (BWR) are validating the proof of concept of the proposed system. (authors)

  17. Space Weather Impact on the European Interconnected Power Transmission System at High Latitudes

    Science.gov (United States)

    Piccinelli, Roberta; Krausmann, Elisabeth

    2016-04-01

    High voltage power transmission grids can suffer outages or blackouts during geomagnetic storms (GMS). More specifically, GMS can inject geomagnetically induced currents (GICs) into the power network. Transformers were identified as the most vulnerable components of the power networks: GICs cause transformers to work in saturation regions generating voltage instabilities and eventually driving the system to collapse. Since GMS are expected to cause more pronounced disturbances at high latitudes, we addressed the effects of extreme GMS on the Scandinavian 400 kV interconnected power transmission grid, including Finland, Sweden and Norway. By applying extreme 100-year-benchmark scenarios, we analyzed potential space-weather triggered voltage instabilities in the power grid considering mono-phase transformers, which are known to be more vulnerable to GIC injection, and three-phase transformers, which are more resistant. We assumed that every node of the grid included either transformers of the mono-phase type, or three-phase transformers.Our simulations indicate that the three-phase configuration of the network is significantly more robust than the mono-phase one. Our study indicates that for a system with only three-phase transformers the likelihood of grid collapse is very low, and collapse only occurs for the worst-case scenario with extremely high geoelectric field intensities. In such a case, the increase in reactive power demand caused by transformer saturation is too high for the system to continue to provide power. Our results indicate that lines that experience higher reactive power losses during normal operation are more likely to increase losses during a GMS event. According to our study, the portion of the Scandinavian interconnected power transmission grid most vulnerable to extreme space weather is the part where the highest reactive losses in transmission lines and in voltage magnitudes are observed. This corresponds to the southern parts of Sweden and

  18. Power Electronics for Distributed Energy Systems and Transmission and Distribution Applications: Assessing the Technical Needs for Utility Applications

    Energy Technology Data Exchange (ETDEWEB)

    Tolbert, L.M.

    2005-12-21

    Power electronics can provide utilities the ability to more effectively deliver power to their customers while providing increased reliability to the bulk power system. In general, power electronics is the process of using semiconductor switching devices to control and convert electrical power flow from one form to another to meet a specific need. These conversion techniques have revolutionized modern life by streamlining manufacturing processes, increasing product efficiencies, and increasing the quality of life by enhancing many modern conveniences such as computers, and they can help to improve the delivery of reliable power from utilities. This report summarizes the technical challenges associated with utilizing power electronics devices across the entire spectrum from applications to manufacturing and materials development, and it provides recommendations for research and development (R&D) needs for power electronics systems in which the U.S. Department of Energy (DOE) could make a substantial impact toward improving the reliability of the bulk power system.

  19. Subwavelength elastic joints connecting torsional waveguides to maximize the power transmission coefficient

    Science.gov (United States)

    Lee, Joong Seok; Lee, Il Kyu; Seung, Hong Min; Lee, Jun Kyu; Kim, Yoon Young

    2017-03-01

    Joints with slowly varying tapered shapes, such as linear or exponential profiles, are known to transmit incident wave power efficiently between two waveguides with dissimilar impedances. This statement is valid only when the considered joint length is longer than the wavelengths of the incident waves. When the joint length is shorter than the wavelengths, however, appropriate shapes of such subwavelength joints for efficient power transmission have not been explored much. In this work, considering one-dimensional torsional wave motion in a cylindrical elastic waveguide system, optimal shapes or radial profiles of a subwavelength joint maximizing the power transmission coefficient are designed by a gradient-based optimization formulation. The joint is divided into a number of thin disk elements using the transfer matrix approach and optimal radii of the disks are determined by iterative shape optimization processes for several single or bands of wavenumbers. Due to the subwavelength constraint, the optimized joint profiles were found to be considerably different from the slowly varying tapered shapes. Specifically, for bands of wavenumbers, peculiar gourd-like shapes were obtained as optimal shapes to maximize the power transmission coefficient. Numerical results from the proposed optimization formulation were also experimentally realized to verify the validity of the present designs.

  20. Allocation of fixed transmission cost based on power flow tracing algorithm

    Institute of Scientific and Technical Information of China (English)

    ZHANG Qian; YU Ji-hui

    2005-01-01

    In the electricity market, charging based on the traditional spot electricity price often results in the payment imbalance of electric network, and goes against the development of the power system. So, it is necessary to modify the spot price. The key of the modification lies in how to calculate the fixed unit transmission cost of each node, that is how to allocate the fixed transmission cost to users.To solve this problem, we develop a power flow tracing algrithm to modify the spot price. We put forward a path searching method based on the graph theory after studying the fundamental principle of power flow tracing and apply the method to the downstream tracing algorithm and upstream tracing algorithm according to the proportional distribution principle. Furthermore, to improve the computational efficiency of the algorithm, we introduce the branch expunction method to optimize the node order. By using the result of power flow tracing to get fixed node transmission cost and introducing it to modify the spot price, we obtain the synthetical price.The application to a 5-bus system prove the algorithm feasible.

  1. Design of a telemetry system based on wireless power transmission for physiological parameter monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Jia, Zhiwei, E-mail: jiayege@hotmail.com [College of Electrical and Information Engineering, Changsha University of Science and Technology, Changsha (China); Yan, Guozheng; Zhu, Bingquan [820 Institute, School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai (China)

    2015-04-15

    An implanted telemetry system for experimental animals with or without anaesthesia can be used to continuously monitor physiological parameters. This system is significant not only in the study of organisms but also in the evaluation of drug efficacy, artificial organs, and auxiliary devices. The system is composed of a miniature electronic capsule, a wireless power transmission module, a data-recording device, and a processing module. An electrocardiograph, a temperature sensor, and a pressure sensor are integrated in the miniature electronic capsule, in which the signals are transmitted in vitro by wireless communication after filtering, amplification, and A/D sampling. To overcome the power shortage of batteries, a wireless power transmission module based on electromagnetic induction was designed. The transmitting coil of a rectangular-section solenoid and a 3D receiving coil are proposed according to stability and safety constraints. Experiments show that at least 150 mW of power could pick up on the load in a volume of Φ10.5 mm × 11 mm, with a transmission efficiency of 2.56%. Vivisection experiments verified the feasibility of the integrated radio-telemetry system.

  2. ELECTRODYNAMICS OF TRANSMISSION AND LOSSES OF POWER IN THE DEVICES OF ELECTRIC TRACTION SYSTEMS

    Directory of Open Access Journals (Sweden)

    M. O. Kostin

    2014-01-01

    Full Text Available Purpose. Theoretical justification of the "field" approach (based on electromagnetic field to the transmission and losses of power in the devices of traction power supply systems and electric rolling stock. Methodology. The methods of electromagnetic field theory and, in particular, the theory and practice of electromagnetic energy transmission based on the concept of the Poynting vector and elements of the theory of propagation, reflection and refraction of plane electromagnetic waves were used. Findings. Theoretical studies of electromagnetic energy transmission from the traction substation to the electric rolling stock through dielectric (air surrounding traction network: between the contact wire and the rail were carried out. It is proposed strategic designing "squat" (low types of electric rolling stock. The components of electric energy flow through the roof of electric rolling stock and its frontal part of the body were estimated. This allows reliable etimating active power losses in electric traction system. To compensate the reactive power consumed by electric rolling stock, which is conditioned by standing waves, it is proposed (for extinction of the the last to develop and put in front of electric rolling stock the layer of particular environment with the necessary parameters. Originality. The "field" principle of the power transmission analysis and its losses arising in electric traction system was first proposed. The laws of motion of electromagnetic energy flows through the roof and the frontal part of the body of electric rolling stock were established. Practical value. An expression of the absolute value of the Poynting vector in the points of dielectric (air between the contact wire and the rail was obtained. This allows assessing the highest density of energy, which is transferred to the time unit and predicting the main dimensions of the unit of electric rolling stock. The energy indices of the roof of electric rolling stock

  3. Wireless power and data transmission strategies for next-generation capsule endoscopes

    Science.gov (United States)

    Puers, R.; Carta, R.; Thoné, J.

    2011-05-01

    Capsular endoscopy is becoming increasingly popular as an alternative to traditional gastro-intestinal (GI) examination techniques. However, the breakthrough of these devices is hindered by the limited amount of power that can be stored in a tiny pill. Most commercial devices use two watch batteries that can only provide an average power of 25 mW for about 6 h, certainly not sufficient for advanced robotic features. A dedicated inductive powering system, operating at 1 MHz to limit the human body absorption, has been developed which was proven to support the transfer of over 300 mW. The system relies on a condensed set of orthogonal ferrite coils, embedded in the capsule, and an external unit based on a Helmholtz coil driven by a class E amplifier. Control data can be sent through the inductive link by modulating the power carrier, whereas a dedicated high data rate RF link is used to transfer the images from the capsule to the base station. Besides evaluating the compatibility with radio transmission, several demonstrators were assembled combining the wireless powering system with various locomotion strategies and LED illumination. This paper describes the design and implementation of the inductive powering system, its combination with data transmission techniques and the testing activity with other capsule-dedicated modules.

  4. Game Changing Usage of High-Voltage Power Transmission Systems as Extremely Large Antennas for Space Physical and Geophysical Remote Imaging Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Geomagnetic storms drive geomagnetically induced currents (GIC) in high-voltage power transmission systems worldwide. GIC distribution in the transmission system is...

  5. An Implementation of Low Cost and Low-power Network Broadcast Data Transmission and Storage System

    Science.gov (United States)

    Yi, Qing-Ming; Shi, Min; He, Yi-Hua

    A connectivity and realization method for the one-to-many remote network data transmission and storage was introduced in this paper. 3D LED display array needs large size data to display a stereo picture. This method was used in 3D LED display array to resolve data secure transmission problem. Combining the Intel 28FJ3A series Flash and Ethernet control chip DM9000A,it applied the Field-Programmable Gate Array (FPGA) and Verilog HDL programming technology to the system, implemented synchronic display and storage of stereograph, and reached 100 Mbps in the network transmission .Testing shows that the system is of low-cost,low-power and high-speed.

  6. Characterization of high performance silicon-based VMJ PV cells for laser power transmission applications

    Science.gov (United States)

    Perales, Mico; Yang, Mei-huan; Wu, Cheng-liang; Hsu, Chin-wei; Chao, Wei-sheng; Chen, Kun-hsien; Zahuranec, Terry

    2016-03-01

    Continuing improvements in the cost and power of laser diodes have been critical in launching the emerging fields of power over fiber (PoF), and laser power beaming. Laser power is transmitted either over fiber (for PoF), or through free space (power beaming), and is converted to electricity by photovoltaic cells designed to efficiently convert the laser light. MH GoPower's vertical multi-junction (VMJ) PV cell, designed for high intensity photovoltaic applications, is fueling the emergence of this market, by enabling unparalleled photovoltaic receiver flexibility in voltage, cell size, and power output. Our research examined the use of the VMJ PV cell for laser power transmission applications. We fully characterized the performance of the VMJ PV cell under various laser conditions, including multiple near IR wavelengths and light intensities up to tens of watts per cm2. Results indicated VMJ PV cell efficiency over 40% for 9xx nm wavelengths, at laser power densities near 30 W/cm2. We also investigated the impact of the physical dimensions (length, width, and height) of the VMJ PV cell on its performance, showing similarly high performance across a wide range of cell dimensions. We then evaluated the VMJ PV cell performance within the power over fiber application, examining the cell's effectiveness in receiver packages that deliver target voltage, intensity, and power levels. By designing and characterizing multiple receivers, we illustrated techniques for packaging the VMJ PV cell for achieving high performance (> 30%), high power (> 185 W), and target voltages for power over fiber applications.

  7. Analysis and Experimental Evaluation of Power Line Transmission Parameters for Power Line Communication

    Science.gov (United States)

    Mlynek, P.; Misurec, J.; Koutny, M.; Fujdiak, R.; Jedlicka, T.

    2015-04-01

    The article describes a way of evaluating the power line channel frequency response and input impedance by means of the linear time-invariant (LTI) power line generator. Two possible methods are introduced for the calculation of primary parameters: the first method depends on the physical realization and physical dimension of the cable, and the second method is derived from the data provided by typical electrical cable manufacturers. Based on these methods, a comparison of transfer functions was made. This is followed by measurement evaluation and numerical verification on a simple topology

  8. Diversity of life. Effects of power generation and transmission on biodiversity difficult to assess

    Energy Technology Data Exchange (ETDEWEB)

    Hongisto, M.; Nikula, A.

    1996-11-01

    Scientific theories do not necessarily enable us to forecast the consequences of our actions on wildlife. Presumably, nature is able to adapt to environmental changes through variations on the genetic, species and ecosystem level; i.e. by means of biodiversity. The first studies conducted within the electricity sector show that the effects of emissions form an individual power plant on biodiversity are extremely difficult to assess because of long-range dispersion of the emission and many other factors simultaneously acting on the environment. Some concrete information about the impact of power transmission lines on biodiversity was obtained. These effects were primarily reversible. Some transmission line zones may even have favourable effects on biodiversity and on the living conditions of certain endangered species. (orig.)

  9. Fault detection and classification in electrical power transmission system using artificial neural network.

    Science.gov (United States)

    Jamil, Majid; Sharma, Sanjeev Kumar; Singh, Rajveer

    2015-01-01

    This paper focuses on the detection and classification of the faults on electrical power transmission line using artificial neural networks. The three phase currents and voltages of one end are taken as inputs in the proposed scheme. The feed forward neural network along with back propagation algorithm has been employed for detection and classification of the fault for analysis of each of the three phases involved in the process. A detailed analysis with varying number of hidden layers has been performed to validate the choice of the neural network. The simulation results concluded that the present method based on the neural network is efficient in detecting and classifying the faults on transmission lines with satisfactory performances. The different faults are simulated with different parameters to check the versatility of the method. The proposed method can be extended to the Distribution network of the Power System. The various simulations and analysis of signals is done in the MATLAB(®) environment.

  10. High power testing of water-cooled waveguide for ITER-like ECH transmission lines

    Science.gov (United States)

    Anderson, J. P.; Doane, J. L.; Grunloh, H. J.; O'Neill, R. C.; Ikeda, R.; Oda, Y.; Takahashi, K.; Sakamoto, K.

    2017-05-01

    The results of high power testing of new water-cooled ECH waveguide components for ITER are presented. The components are a precision-coupled 4.2 m waveguide assembly, a short expansion joint, and water-cooled waveguide for gyrotron commissioning. The testing was conducted at the QST Naka Fusion Institute using gyrotron pulses of 450 kW at 170 GHz for 300 s. Analysis shows that the power absorbed per unit length for the various waveguide components are dependent on location in the transmission line with respect to high order mode generators, such as miter bends. Additionally, larger-than-expected reflections from the load led to high absorption levels in the transmission line.

  11. DESIGN OF TWO-PHASE SINUSOIDAL POWER CLOCK AND CLOCKED TRANSMISSION GATE ADIABATIC LOGIC CIRCUIT

    Institute of Scientific and Technical Information of China (English)

    Wang Pengjun; Yu Junjun

    2007-01-01

    First the research is conducted on the design of the two-phase sinusoidal power clock generator in this paper. Then the design of the new adiabatic logic circuit adopting the two-phase sinusoidal power clocks-Clocked Transmission Gate Adiabatic Logic (CTGAL) circuit is presented. This circuit makes use of the clocked transmission gates to sample the input signals, then the output loads are charged and discharged in a fully adiabatic manner by using bootstrapped N-Channel Metal Oxide Semiconductor (NMOS) and Complementary Metal Oxide Semiconductor (CMOS) latch structure.Finally, with the parameters of Taiwan Semiconductor Manufacturing Company (TSMC) 0.25 μm CMOS device, the transient energy consumption of CTGAL, Bootstrap Charge-Recovery Logic (BCRL)and Pass-transistor Adiabatic Logic (PAL) including their clock generators is simulated. The simulation result indicates that CTGAL circuit has the characteristic of remarkably low energy consumption.

  12. Diversity of life. Effects of power generation and transmission on biodiversity difficult to assess

    Energy Technology Data Exchange (ETDEWEB)

    Hongisto, M.; Nikula, A.

    1996-11-01

    Scientific theories do not necessarily enable us to forecast the consequences of our actions on wildlife. Presumably, nature is able to adapt to environmental changes through variations on the genetic, species and ecosystem level; i.e. by means of biodiversity. The first studies conducted within the electricity sector show that the effects of emissions form an individual power plant on biodiversity are extremely difficult to assess because of long-range dispersion of the emission and many other factors simultaneously acting on the environment. Some concrete information about the impact of power transmission lines on biodiversity was obtained. These effects were primarily reversible. Some transmission line zones may even have favourable effects on biodiversity and on the living conditions of certain endangered species. (orig.)

  13. An improved IEEE 802.11 protocol for reliable data transmission in power distribution fault diagnosis

    Energy Technology Data Exchange (ETDEWEB)

    Campoccia, F.; Di Silvestre, M.L.; Sanseverino, E.R.; Zizzo, G. [Palermo Univ., Palermo (Italy)

    2010-10-15

    In power systems, on-line transmission between local units and the central unit can be done by means of power line communications or wireless technology. During an electrical fault, the reliability of the distribution system depends on the security of the timely protective and restorative actions on the network. This paper focused on the WiFi system because of its economy and ease of installation. However, WiFi systems are typically managed by the IEEE 802.11 protocol, which is not reliable in terms of security in data communication. In WiFi networks, data is divided into packets and sent in succession to reduce errors within the radio channel. The IEEE 802.11 protocol has high probability for loss of packets or delay in their transmission. In order to ensure the reliability of data transmission times between two terminal units connected by WiFi stations, a new protocol was derived by modifying the IEEE 802.11. The improvements of the new protocol were highlighted and its capability for the diagnostic service was verified. The modified protocol eliminates the danger of collisions between packets and optimizes the transmission time for sending information. 6 refs., 7 tabs., 8 figs.

  14. Force transmissibility and vibration power flow behaviour of inerter-based vibration isolators

    Science.gov (United States)

    Yang, Jian

    2016-09-01

    This paper investigates the dynamics and performance of inerter-based vibration isolators. Force / displacement transmissibility and vibration power flow are obtained to evaluate the isolation performance. Both force and motion excitations are considered. It is demonstrated that the use of inerters can enhance vibration isolation performance by enlarging the frequency band of effective vibration isolation. It is found that adding inerters can introduce anti-resonances in the frequency-response curves and in the curves of the force and displacement transmissibility such that vibration transmission can be suppressed at interested excitation frequencies. It is found that the introduction of inerters enhances inertial coupling and thus have a large influence on the dynamic behaviour at high frequencies. It is shown that force and displacement transmissibility increases with the excitation frequency and tends to an asymptotic value as the excitation frequency increases. In the high-frequency range, it was shown that adding inerters can result in a lower level of input power. These findings provide a better understanding of the effects of introducing inerters to vibration isolation and demonstrate the performance benefits of inerter-based vibration isolators.

  15. The Mathematical Model of Power System with Thyristor Controlled Series Capacitor in Long Transmission Line

    Directory of Open Access Journals (Sweden)

    Prechanon Kumkratug

    2012-01-01

    Full Text Available Problem statement: It is becoming increasingly important to fully utilize the existing transmission system assets due to environmental legislation, rights-of-way issues and costs of construction and deregulation policies that introduced in recent years. The Thyristor Controlled Series Capacitor (TCSC has been proposed for the better control power flow and dynamic performance. The exact long transmission line model consists of the resistance and reactance. Most of previous researches studies transient stability performance of the TCSC in SMIB System with neglecting the resistance of the line. Thus the fully capability of the TCSC on transient stability improvement of power system may not be applied. The consideration of the resistance causes in the difficulty of deriving the mathematical model. Approach: This study investigates the effect of the TCSC on transient stability of the power system with consideration the exact long transmission line mode. The concept of two-port network is applied to simplify the mathematical model of the power system. The proposed method is tested on sample system and compared on various cases. Results: The first swing of rotor angle curve of the faulted system without resistance is obviously higher than that of with resistance whereas the second swing of the faulted system without resistance is slightly less than that of with resistance. The system with a TCSC can improve transient stability of power system. Conclusion: It was found from this study that the TCSC and resistance of the line can improve first swing of rotor angle. However, the resistance of the line provides the negative effect on second swing of rotor angle. The simulation results indicate that for practical long line, the resistance is very import parameters for evaluating transient stability of power system.

  16. Analysis of electromagnetic interference from power system processing and transmission components for Space Station Freedom

    Science.gov (United States)

    Barber, Peter W.; Demerdash, Nabeel A. O.; Hurysz, B.; Luo, Z.; Denny, Hugh W.; Millard, David P.; Herkert, R.; Wang, R.

    1992-01-01

    The goal of this research project was to analyze the potential effects of electromagnetic interference (EMI) originating from power system processing and transmission components for Space Station Freedom. The approach consists of four steps: (1) developing analytical tools (models and computer programs); (2) conducting parameterization (what if?) studies; (3) predicting the global space station EMI environment; and (4) providing a basis for modification of EMI standards.

  17. Transmission power requirements for novel ZigBee implants in the gastrointestinal tract.

    Science.gov (United States)

    Valdastri, Pietro; Menciassi, Arianna; Dario, Paolo

    2008-06-01

    In this paper, a novel multinode wireless monitoring platform, based on ZigBee communication standard, is presented and tested in vivo. The transmission power levels needed to establish a reliable connection from the different gastrointestinal districts are reported and compared with safety levels from international guidelines. These findings can be useful to evaluate the effectiveness of a commercial and standardized approach to implantable and miniaturized monitoring of physiological parameters.

  18. Adaptive Neurofuzzy Inference System-Based Pollution Severity Prediction of Polymeric Insulators in Power Transmission Lines

    OpenAIRE

    C. Muniraj; Chandrasekar, S

    2011-01-01

    This paper presents the prediction of pollution severity of the polymeric insulators used in power transmission lines using adaptive neurofuzzy inference system (ANFIS) model. In this work, laboratory-based pollution performance tests were carried out on 11 kV silicone rubber polymeric insulator under AC voltage at different pollution levels with sodium chloride as a contaminant. Leakage current was measured during the laboratory tests. Time domain and frequency domain characteristics of leak...

  19. Physical Basis of Power Transmission Wire’s Deicing by Electrodynamic Method

    Directory of Open Access Journals (Sweden)

    Lyapunov Danil Yu.

    2014-01-01

    Full Text Available In this paper a new method of power transmission wire’’s deicing is described. Deicing process is divided into three independent sub-processes, namely the process of melting the thin inner layer of ice cover, the process of ice cylinder fracturing into components due to bending deformations; the process of shaking off the fractured ice cylinder elements by inertial forces. Mathematical description of each sub-process is shown.

  20. The behaviour of the power transmission tower subjected to horizontal support’s movements

    OpenAIRE

    Shu, Q.; Yuan, G.; Z. Huang; Ye, S.

    2016-01-01

    In this paper, two half-scaled test tower models for a typical 110 kV single-circuit power transmission tower were designed and fabricated. The scaled test tower models were tested under the horizontal support’s stretching (tensile) and compressive movements with the normal working loading conditions. The deformations of the tested tower models and stresses within the different bracing members were fully measured. A large amount of comprehensive test data was generated. Also a finite element ...

  1. Factors that affect the fatigue strength of power transmission shafting and their impact on design

    Science.gov (United States)

    Leowenthal, S. H.

    1986-01-01

    A long standing objective in the design of power transmission shafting is to eliminate excess shaft material without compromising operational reliability. A shaft design method is presented which accounts for variable amplitude loading histories and their influence on limited life designs. The effects of combined bending and torsional loading are considered along with a number of application factors known to influence the fatigue strength of shafting materials. Among the factors examined are surface condition, size, stress concentration, residual stress and corrosion fatigue.

  2. Expansion of the power transmission network - are the incentives sufficient?; Ausbau des Stromtransportnetzes - reichen die Anreize?

    Energy Technology Data Exchange (ETDEWEB)

    Weber, Michael; Dross, Miriam [The German Advisory Council on the Environment (SRU), Berlin (Germany); Holm-Mueller, Karin [The German Advisory Council on the Environment (SRU), Berlin (Germany); Bonn Univ. (Germany). Professur fuer Ressourcen- und Umweltoekonomik

    2011-03-15

    Germany is faced with the challenge of having to dramatically expand its power transmission networks. But are the right framework conditions in place, in other words: can the existing Incentive Regulation Ordinance stimulate investment to the required degree, or are further instruments needed? A detailed analysis of the existing regulatory regime shows that incentive regulation alone will not be enough to master the tremendous task at hand. Coordinated tendering may be a promising approach, at least for point-to-point connections.

  3. Application of Lead Viscoelastic Dampers to Wind Vibration Control on Big-Span Power Transmission Tower

    Institute of Scientific and Technical Information of China (English)

    LIANG Zheng-ping; LI Li; YIN Peng; DUAN Song-tao

    2008-01-01

    To study the wind vibration response of power transmission tower, the lead viscoelastic dampers (LVDs) were applied to a cup tower. With time history analysis method, the displacement, velocity, acceleration and force response of the tower was calculated and analyzed. The results show that the control effect of lead viscoelastic dampers is very good, and the damping ratio can reach 20% or more when they are applied to the tower head.

  4. Power Adaptation Based on Truncated Channel Inversion for Hybrid FSO/RF Transmission With Adaptive Combining

    KAUST Repository

    Rakia, Tamer

    2015-07-23

    Hybrid free-space optical (FSO)/radio-frequency (RF) systems have emerged as a promising solution for high-data-rate wireless communications. In this paper, we consider power adaptation strategies based on truncated channel inversion for the hybrid FSO/RF system employing adaptive combining. Specifically, we adaptively set the RF link transmission power when FSO link quality is unacceptable to ensure constant combined signal-to-noise ratio (SNR) at the receiver. Two adaptation strategies are proposed. One strategy depends on the received RF SNR, whereas the other one depends on the combined SNR of both links. Analytical expressions for the outage probability of the hybrid system with and without power adaptation are obtained. Numerical examples show that the hybrid FSO/RF system with power adaptation achieves a considerable outage performance improvement over the conventional system.

  5. On variable hydrostatic transmission for road vehicles, powered by supply of fluid at constant pressure

    Science.gov (United States)

    Magi, M.; Freivald, A.; Andersson, I.; Ericsson, U.

    1981-05-01

    Various hydrostatic power transmission systems for automotive applications with power supply at constant pressure and unrestricted flow and with a Volvo Flygmotor variable displacement motor as the principal unit were investigated. Two most promising concepts were analyzed in detail and their main components optimized for minimum power loss at the EPA Urban Driving Cycle. The best fuel consumption is less than 10 lit. per 100 kM for a 1542 kG vehicle with a hydrostatic motor and a two speed gear box in series (braking power not recovered). Realistic system pressure affects the fuel consumption just slightly, but the package volume/weight drastically. Back pressure increases losses significantly. Special attention was paid to description of the behavior and modeling of the losses of variable displacement hydrostatic machines.

  6. Design of Transmission Gate VCO and Dynamic PFD for Low Power CMOS PLL

    Science.gov (United States)

    Yuan, S. C.

    2008-11-01

    To realize the high speed and low power CMOS PLL(Phase Locked Loop), the new circuits of VCO and PFD is designed in transistor level. In the VCO, the high speed and low power is realized using transmission-gate(TG) with an adaptive delay cell and low supply sensitivity. This delay cell has a built-in compensation circuit that senses and corrects the delay variation caused by supply fluctuation. And in the PFD, low power and small chip area is realized with the dynamic inverter. A fully CMOS PLL using these components has been designed based 0.6μm CMOS technology and its SPICE model. SPICE simulation results show that at 2.5V supply voltage, the designed PLL can operate over 1000MHz and dissipate power less than 50mW.

  7. Operation reliability analysis of independent power plants of gas-transmission system distant production facilities

    Directory of Open Access Journals (Sweden)

    Piskunov Maksim V.

    2015-01-01

    Full Text Available The new approach was developed to analyze the failure causes in operation of linear facilities independent power supply sources (mini-CHP-plants of gas-transmission system in Eastern part of Russia. Triggering conditions of ceiling operation substance temperature at condenser output were determined with mathematical simulation use of unsteady heat and mass transfer processes in condenser of mini-CHP-plants. Under these conditions the failure probability in operation of independent power supply sources is increased. Influence of environmental factors (in particular, ambient temperature as well as output electric capability values of power plant on mini-CHP-plant operation reliability was analyzed. Values of mean time to failure and power plant failure density during operation in different regions of Eastern Siberia and Far East of Russia were received with use of numerical simulation results of heat and mass transfer processes at operation substance condensation.

  8. Parametric analysis of hollow conductor parallel and coaxial transmission lines for high frequency space power distribution

    Science.gov (United States)

    Jeffries, K. S.; Renz, D. D.

    1984-01-01

    A parametric analysis was performed of transmission cables for transmitting electrical power at high voltage (up to 1000 V) and high frequency (10 to 30 kHz) for high power (100 kW or more) space missions. Large diameter (5 to 30 mm) hollow conductors were considered in closely spaced coaxial configurations and in parallel lines. Formulas were derived to calculate inductance and resistance for these conductors. Curves of cable conductance, mass, inductance, capacitance, resistance, power loss, and temperature were plotted for various conductor diameters, conductor thickness, and alternating current frequencies. An example 5 mm diameter coaxial cable with 0.5 mm conductor thickness was calculated to transmit 100 kW at 1000 Vac, 50 m with a power loss of 1900 W, an inductance of 1.45 micron and a capacitance of 0.07 micron-F. The computer programs written for this analysis are listed in the appendix.

  9. Solid-state retrodirective phased array concepts for microwave power transmission from Solar Power Satellite

    Science.gov (United States)

    Schroeder, K. G.; Petroff, I. K.

    1980-01-01

    Two prototype solid-state phased array systems concepts for potential use in the Solar Power Satellite are described. In both concepts, the beam is centered on the rectenna by means of phase conjugation of a pilot signal emanating from the ground. Also discussed is on-going solid-state amplifier development.

  10. A Horn-to-Horn Power Transmission System at Terahertz Frequencies

    Science.gov (United States)

    Gonzalez, A.; Uzawa, Y.; Fujii, Y.; Kaneko, K.; Kuroiwa, K.

    2011-11-01

    A horn-to-horn power transmission system at Terahertz frequencies has been designed and tested. Power is generated at microwave frequencies and then frequency multiplied to the band 799-938 GHz. The resultant signal is radiated by a diagonal horn and redirected by two identical elliptical mirrors to another diagonal horn located far away. Useful design equations have been derived for the proposed system. The concept has been proven by careful measurements and utilized for the local oscillator injection in the Atacama Large Millimeter Array (ALMA) Band-10 receiver.

  11. The European Legislation Applicable to Medium-Range Inductive Wireless Power Transmission Systems

    Directory of Open Access Journals (Sweden)

    Frédéric Broydé

    2014-01-01

    Full Text Available Medium-range inductive wireless power transmission systems allow a sufficient power transfer without requiring close proximity between a primary coil and a secondary coil. We briefly investigate the range of a typical system and its radiated emission, from the perspectives of electromagnetic compatibility (EMC and human exposure requirements. We then discuss the applicable legislation in the European Union, the main question being the applicability of the R&TTE or radio equipment directives. Our conclusion is that this applicability depends on multiple parameters, among which is the presence of a self-tuning capability or of a transmitter control based on telemetry.

  12. Power-efficient method for IM-DD optical transmission of multiple OFDM signals.

    Science.gov (United States)

    Effenberger, Frank; Liu, Xiang

    2015-05-18

    We propose a power-efficient method for transmitting multiple frequency-division multiplexed (FDM) orthogonal frequency-division multiplexing (OFDM) signals in intensity-modulation direct-detection (IM-DD) optical systems. This method is based on quadratic soft clipping in combination with odd-only channel mapping. We show, both analytically and experimentally, that the proposed approach is capable of improving the power efficiency by about 3 dB as compared to conventional FDM OFDM signals under practical bias conditions, making it a viable solution in applications such as optical fiber-wireless integrated systems where both IM-DD optical transmission and OFDM signaling are important.

  13. Application of wireless power transmission systems in wireless capsule endoscopy: an overview.

    Science.gov (United States)

    Basar, Md Rubel; Ahmad, Mohd Yazed; Cho, Jongman; Ibrahim, Fatimah

    2014-06-19

    Wireless capsule endoscopy (WCE) is a promising technology for direct diagnosis of the entire small bowel to detect lethal diseases, including cancer and obscure gastrointestinal bleeding (OGIB). To improve the quality of diagnosis, some vital specifications of WCE such as image resolution, frame rate and working time need to be improved. Additionally, future multi-functioning robotic capsule endoscopy (RCE) units may utilize advanced features such as active system control over capsule motion, drug delivery systems, semi-surgical tools and biopsy. However, the inclusion of the above advanced features demands additional power that make conventional power source methods impractical. In this regards, wireless power transmission (WPT) system has received attention among researchers to overcome this problem. Systematic reviews on techniques of using WPT for WCE are limited, especially when involving the recent technological advancements. This paper aims to fill that gap by providing a systematic review with emphasis on the aspects related to the amount of transmitted power, the power transmission efficiency, the system stability and patient safety. It is noted that, thus far the development of WPT system for this WCE application is still in initial stage and there is room for improvements, especially involving system efficiency, stability, and the patient safety aspects.

  14. Inductive power transmission to millimeter-sized biomedical implants using printed spiral coils.

    Science.gov (United States)

    Ibrahim, Ahmed; Kiani, Mehdi

    2016-08-01

    The operation frequency (f) has been a key parameter in optimizing wireless power transmission links for biomedical implants with millimeter (mm) dimensions. This paper studies the feasibility of using printed spiral coils (PSCs) for powering mm-sized implants with high power transmission efficiency (PTE) at different fps. Compared to wire-wound coils (WWCs), using a PSC in the implant side allows batch fabrication on rigid or flexible substrates, which can also be used as a platform for integrating implant components. For powering an implant with 1 mm diameter, located 10 mm inside the tissue, the geometries of transmitter (Tx) and receiver (Rx) PSCs were optimized at different fPs of 50 MHz, 200 MHz, and 500 MHz using a commercial field solver (HFSS). In simulations, PSC- and WWC-based links achieved maximum PTE of 0.13% and 3.3%, and delivered power of 65.7 μW and 720 μW under specific absorption rate (SAR) constraints at the optimal fp of 50 MHz and 100 MHz, respectively, suggesting that the performance of the PSC-based link is significantly inferior to that of the WWC-based link.

  15. Broad band Transmission Performance over Residential Power Lines Employing VDSL2

    Directory of Open Access Journals (Sweden)

    Usha Rani K R

    2013-01-01

    Full Text Available Bridging and Transmission of VDSL2 broadband over power lines has received considerable attention recently to cater to broadband distribution within the premises of a residence. Power lines are fundamentally different from telephone lines both in topology and load impedance. Power lines have a thicker gauge and shorter straight lengths, apart from a large number of bridge taps (BT with inductive load terminations, which are not matched to line impedances. In this paper ABCD parameters of the individual sections are used to analyze the power line channel of upto 10 bridge taps over a 600 meter length. The noise profiles considered include periodic impulse noise which is predominant over power line sections, apart from AWGN. Tone loading profiles have been obtained using Discrete Multitone Transmission (DMT as in VDSL2 over a bandwidth of 30 MHz. This analysis points to the fact that lower Transmit PSD would suffice to match the rates achievable by traditional VDSL2 when bridge taps are open. However with inductive loads typical in residences, we recommend a two step approach of (a equipping existing VDSL2 modem front end hybrids with settable impedances that would approach a conjugate match of the loaded line along with (b capability to nominally increase the Transmit PSD and added subbands to achieve the desired rates in a seamless manner as in VDSL2.

  16. Application of Wireless Power Transmission Systems in Wireless Capsule Endoscopy: An Overview

    Directory of Open Access Journals (Sweden)

    Md Rubel Basar

    2014-06-01

    Full Text Available Wireless capsule endoscopy (WCE is a promising technology for direct diagnosis of the entire small bowel to detect lethal diseases, including cancer and obscure gastrointestinal bleeding (OGIB. To improve the quality of diagnosis, some vital specifications of WCE such as image resolution, frame rate and working time need to be improved. Additionally, future multi-functioning robotic capsule endoscopy (RCE units may utilize advanced features such as active system control over capsule motion, drug delivery systems, semi-surgical tools and biopsy. However, the inclusion of the above advanced features demands additional power that make conventional power source methods impractical. In this regards, wireless power transmission (WPT system has received attention among researchers to overcome this problem. Systematic reviews on techniques of using WPT for WCE are limited, especially when involving the recent technological advancements. This paper aims to fill that gap by providing a systematic review with emphasis on the aspects related to the amount of transmitted power, the power transmission efficiency, the system stability and patient safety. It is noted that, thus far the development of WPT system for this WCE application is still in initial stage and there is room for improvements, especially involving system efficiency, stability, and the patient safety aspects.

  17. Experimental studies of using wireless energy transmission for powering embedded sensor nodes

    Science.gov (United States)

    Mascarenas, David L.; Flynn, Eric B.; Todd, Michael D.; Overly, Timothy G.; Farinholt, Kevin M.; Park, Gyuhae; Farrar, Charles R.

    2010-06-01

    A major challenge impeding the deployment of wireless sensor networks for structural health monitoring (SHM) is developing a means to supply power to the sensor nodes in an efficient manner. In this paper, we explore possible solutions to this challenge by using a mobile-host based wireless energy transmission system to provide both power and data interrogation commands to sensor nodes. The mobile host features the capability of wirelessly transmitting energy to sensor nodes on an as-needed basis. In addition, it serves as a central data repository and processing center for the data collected from the sensing network. The wirelessly transmitted microwave energy is captured by a receiving antenna, transformed into DC power by a rectifying circuit, and stored in a storage medium to provide the required energy to the sensor node. The application of wireless energy transmission is targeted toward SHM sensor nodes that have been recently developed by the authors, which can be used to collect peak mechanical displacements or piezoelectric impedance measurements. This paper will describe considerations needed to design such energy transmission systems, experimental procedure and results, method of increasing the efficiency, energy conditioning circuits and storage medium, and target applications. Experimental results from a field test on the Alamosa Canyon Bridge in southern New Mexico will also be presented.

  18. Islanding the power grid on the transmission level: less connections for more security.

    Science.gov (United States)

    Mureddu, Mario; Caldarelli, Guido; Damiano, Alfonso; Scala, Antonio; Meyer-Ortmanns, Hildegard

    2016-10-07

    Islanding is known as a management procedure of the power system that is implemented at the distribution level to preserve sensible loads from outages and to guarantee the continuity in electricity supply, when a high amount of distributed generation occurs. In this paper we study islanding on the level of the transmission grid and shall show that it is a suitable measure to enhance energy security and grid resilience. We consider the German and Italian transmission grids. We remove links either randomly to mimic random failure events, or according to a topological characteristic, their so-called betweenness centrality, to mimic an intentional attack and test whether the resulting fragments are self-sustainable. We test this option via the tool of optimized DC power flow equations. When transmission lines are removed according to their betweenness centrality, the resulting islands have a higher chance of being dynamically self-sustainable than for a random removal. Less connections may even increase the grid's stability. These facts should be taken into account in the design of future power grids.

  19. Islanding the power grid on the transmission level: less connections for more security

    Science.gov (United States)

    Mureddu, Mario; Caldarelli, Guido; Damiano, Alfonso; Scala, Antonio; Meyer-Ortmanns, Hildegard

    2016-10-01

    Islanding is known as a management procedure of the power system that is implemented at the distribution level to preserve sensible loads from outages and to guarantee the continuity in electricity supply, when a high amount of distributed generation occurs. In this paper we study islanding on the level of the transmission grid and shall show that it is a suitable measure to enhance energy security and grid resilience. We consider the German and Italian transmission grids. We remove links either randomly to mimic random failure events, or according to a topological characteristic, their so-called betweenness centrality, to mimic an intentional attack and test whether the resulting fragments are self-sustainable. We test this option via the tool of optimized DC power flow equations. When transmission lines are removed according to their betweenness centrality, the resulting islands have a higher chance of being dynamically self-sustainable than for a random removal. Less connections may even increase the grid’s stability. These facts should be taken into account in the design of future power grids.

  20. An Empirical Study of the Transmission Power Setting for Bluetooth-Based Indoor Localization Mechanisms.

    Science.gov (United States)

    Castillo-Cara, Manuel; Lovón-Melgarejo, Jesús; Bravo-Rocca, Gusseppe; Orozco-Barbosa, Luis; García-Varea, Ismael

    2017-06-07

    Nowadays, there is a great interest in developing accurate wireless indoor localization mechanisms enabling the implementation of many consumer-oriented services. Among the many proposals, wireless indoor localization mechanisms based on the Received Signal Strength Indication (RSSI) are being widely explored. Most studies have focused on the evaluation of the capabilities of different mobile device brands and wireless network technologies. Furthermore, different parameters and algorithms have been proposed as a means of improving the accuracy of wireless-based localization mechanisms. In this paper, we focus on the tuning of the RSSI fingerprint to be used in the implementation of a Bluetooth Low Energy 4.0 (BLE4.0) Bluetooth localization mechanism. Following a holistic approach, we start by assessing the capabilities of two Bluetooth sensor/receiver devices. We then evaluate the relevance of the RSSI fingerprint reported by each BLE4.0 beacon operating at various transmission power levels using feature selection techniques. Based on our findings, we use two classification algorithms in order to improve the setting of the transmission power levels of each of the BLE4.0 beacons. Our main findings show that our proposal can greatly improve the localization accuracy by setting a custom transmission power level for each BLE4.0 beacon.

  1. Power transmission through double-walled laminated composite panels considering porous layer-air gap insulation

    Institute of Scientific and Technical Information of China (English)

    M H SHOJAEIFARD; R TALEBITOOTI; B RANJBAR; R AHMADI

    2014-01-01

    The acoustic behavior of double-walled laminated composite panels consisting of two porous and air gap middle layers is studied within the classical laminated plate theory (CLPT). Thus, viscous and inertia coupling in a dynamic equation, as well as stress transfer, thermal and elastic coupling of porous material are based on the Biot theory. In addition, the wave equations are extracted according to the vibration equation of composite layers. The transmission loss (TL) of the structure is then calculated by solving these equations simultaneously. Statistical energy analysis (SEA) is developed to divide the structure into specific subsystems, and power transmission is extracted with balancing power flow equations of the subsystems. Comparison between the present work and the results reported elsewhere shows excellent agreement. The results also indicate that, although favorable enhancement is seen in noise control particularly at high frequencies, the corresponding parameters associated with fluid phase and solid phase of the porous layer are important on TL according to the boundary condition interfaces. Finally, the influence of composite material and stacking sequence on power transmission is discussed.

  2. A Novel Power-Saving Transmission Scheme for Multiple-Component-Carrier Cellular Systems

    Directory of Open Access Journals (Sweden)

    Yao-Liang Chung

    2016-04-01

    Full Text Available As mobile data traffic levels have increased exponentially, resulting in rising energy costs in recent years, the demand for and development of green communication technologies has resulted in various energy-saving designs for cellular systems. At the same time, recent technological advances have allowed multiple component carriers (CCs to be simultaneously utilized in a base station (BS, a development that has made the energy consumption of BSs a matter of increasing concern. To help address this concern, herein we propose a novel scheme aimed at efficiently minimizing the power consumption of BS transceivers during transmission, while still ensuring good service quality and fairness for users. Specifically, the scheme utilizes the dynamic activation/deactivation of CCs during data transmission to increase power usage efficiency. To test its effectiveness, the proposed scheme was applied to a model consisting of a BS with orthogonal frequency division multiple access-based CCs in a downlink transmission environment. The results indicated that, given periods of relatively light traffic loads, the total power consumption of the proposed scheme is significantly lower than that of schemes in which all the CCs of a BS are constantly activated, suggesting the scheme’s potential for reducing both energy costs and carbon dioxide emissions.

  3. Alleviation SSR and Low Frequency Power Oscillations in Series Compensated Transmission Line using SVC Supplementary Controllers

    Science.gov (United States)

    Kumar, Sanjiv; Kumar, Narendra

    2016-07-01

    In this work, supplementary sub-synchronous damping controllers (SSDC) are proposed for damping sub-synchronous oscillations in power systems with series compensated transmission lines. Series compensation have extensively been used as effective means of increasing the power transfer capability of a transmission lines and improving transient stability limits of power systems. Series compensation with transmission lines may cause sub-synchronous resonance (SSR). The eigenvalue investigation tool is used to ascertain the existence of SSR. It is shown that the addition of supplementary controller is able to stabilize all unstable modes for T-network model. Eigenvalue investigation and time domain transient simulation of detailed nonlinear system are considered to investigate the performance of the controllers. The efficacies of the suggested supplementary controllers are compared on the IEEE first benchmark model for computer simulations of SSR by means of time domain simulation in Matlab/Simulink environment. Supplementary SSDC are considered in order to compare effectiveness of SSDC during higher loading in alleviating the small signal stability problem.

  4. An Empirical Study of the Transmission Power Setting for Bluetooth-Based Indoor Localization Mechanisms

    Directory of Open Access Journals (Sweden)

    Manuel Castillo-Cara

    2017-06-01

    Full Text Available Nowadays, there is a great interest in developing accurate wireless indoor localization mechanisms enabling the implementation of many consumer-oriented services. Among the many proposals, wireless indoor localization mechanisms based on the Received Signal Strength Indication (RSSI are being widely explored. Most studies have focused on the evaluation of the capabilities of different mobile device brands and wireless network technologies. Furthermore, different parameters and algorithms have been proposed as a means of improving the accuracy of wireless-based localization mechanisms. In this paper, we focus on the tuning of the RSSI fingerprint to be used in the implementation of a Bluetooth Low Energy 4.0 (BLE4.0 Bluetooth localization mechanism. Following a holistic approach, we start by assessing the capabilities of two Bluetooth sensor/receiver devices. We then evaluate the relevance of the RSSI fingerprint reported by each BLE4.0 beacon operating at various transmission power levels using feature selection techniques. Based on our findings, we use two classification algorithms in order to improve the setting of the transmission power levels of each of the BLE4.0 beacons. Our main findings show that our proposal can greatly improve the localization accuracy by setting a custom transmission power level for each BLE4.0 beacon.

  5. Alleviation SSR and Low Frequency Power Oscillations in Series Compensated Transmission Line using SVC Supplementary Controllers

    Science.gov (United States)

    Kumar, Sanjiv; Kumar, Narendra

    2017-06-01

    In this work, supplementary sub-synchronous damping controllers (SSDC) are proposed for damping sub-synchronous oscillations in power systems with series compensated transmission lines. Series compensation have extensively been used as effective means of increasing the power transfer capability of a transmission lines and improving transient stability limits of power systems. Series compensation with transmission lines may cause sub-synchronous resonance (SSR). The eigenvalue investigation tool is used to ascertain the existence of SSR. It is shown that the addition of supplementary controller is able to stabilize all unstable modes for T-network model. Eigenvalue investigation and time domain transient simulation of detailed nonlinear system are considered to investigate the performance of the controllers. The efficacies of the suggested supplementary controllers are compared on the IEEE first benchmark model for computer simulations of SSR by means of time domain simulation in Matlab/Simulink environment. Supplementary SSDC are considered in order to compare effectiveness of SSDC during higher loading in alleviating the small signal stability problem.

  6. Islanding the power grid on the transmission level: less connections for more security

    Science.gov (United States)

    Mureddu, Mario; Caldarelli, Guido; Damiano, Alfonso; Scala, Antonio; Meyer-Ortmanns, Hildegard

    2016-01-01

    Islanding is known as a management procedure of the power system that is implemented at the distribution level to preserve sensible loads from outages and to guarantee the continuity in electricity supply, when a high amount of distributed generation occurs. In this paper we study islanding on the level of the transmission grid and shall show that it is a suitable measure to enhance energy security and grid resilience. We consider the German and Italian transmission grids. We remove links either randomly to mimic random failure events, or according to a topological characteristic, their so-called betweenness centrality, to mimic an intentional attack and test whether the resulting fragments are self-sustainable. We test this option via the tool of optimized DC power flow equations. When transmission lines are removed according to their betweenness centrality, the resulting islands have a higher chance of being dynamically self-sustainable than for a random removal. Less connections may even increase the grid’s stability. These facts should be taken into account in the design of future power grids. PMID:27713509

  7. An Empirical Study of the Transmission Power Setting for Bluetooth-Based Indoor Localization Mechanisms

    Science.gov (United States)

    Castillo-Cara, Manuel; Lovón-Melgarejo, Jesús; Bravo-Rocca, Gusseppe; Orozco-Barbosa, Luis; García-Varea, Ismael

    2017-01-01

    Nowadays, there is a great interest in developing accurate wireless indoor localization mechanisms enabling the implementation of many consumer-oriented services. Among the many proposals, wireless indoor localization mechanisms based on the Received Signal Strength Indication (RSSI) are being widely explored. Most studies have focused on the evaluation of the capabilities of different mobile device brands and wireless network technologies. Furthermore, different parameters and algorithms have been proposed as a means of improving the accuracy of wireless-based localization mechanisms. In this paper, we focus on the tuning of the RSSI fingerprint to be used in the implementation of a Bluetooth Low Energy 4.0 (BLE4.0) Bluetooth localization mechanism. Following a holistic approach, we start by assessing the capabilities of two Bluetooth sensor/receiver devices. We then evaluate the relevance of the RSSI fingerprint reported by each BLE4.0 beacon operating at various transmission power levels using feature selection techniques. Based on our findings, we use two classification algorithms in order to improve the setting of the transmission power levels of each of the BLE4.0 beacons. Our main findings show that our proposal can greatly improve the localization accuracy by setting a custom transmission power level for each BLE4.0 beacon. PMID:28590413

  8. Relay selection in underlay cognitive networks with fixed transmission power nodes

    KAUST Repository

    Hussain, Syed Imtiaz

    2013-07-31

    Underlay cognitive networks operate simultaneously with primary networks satisfying stringent interference constraints, which reduces their transmission power and coverage area. To reach remote destinations, secondary sources use relaying techniques. Selecting the best relay among the available ones is a well known technique. Recently, selective cooperation is investigated in cognitive networks where the secondary nodes can adapt their transmission power to always satisfy the interference threshold. In this paper, we investigate a situation where the secondary nodes have a fixed transmission power and may violate the interference threshold. We present two relay selection schemes; the first one excludes the relays not satisfying the interference constraint and then picks up a relay from the remaining ones that can provide the maximum signal-to-noise ratio (SNR). The other scheme uses a quotient of the relay link SNR and the interference from the relay to the primary user and optimizes it to maximise the relay link SNR. We derive closed form expressions for outage probability, bit error rate, channel capacity and diversity of the system for both schemes by using tight approximations. We also study mutual effects of interference. Simulation results confirm the analytical results and reveal that the relay selection is feasible at low SNRs. Copyright © 2013 John Wiley & Sons, Ltd.

  9. Visualization of Available Power Transfer Capability in a Transmission System Using Morphological Techniques

    Directory of Open Access Journals (Sweden)

    S. U. Prabha

    2009-01-01

    Full Text Available A morphological decimation technique has been proposed and implemented to analyze the available power transfer capability in a transmission power network. The method creates a graphical image of the power network with thickness of the lines proportional to their respective rated megavolt ampere (MVA capacity. Based on ac load flow solution, another image was created to represent the power flow in Megawatt (MW between the buses. Proper scaling procedure has been discussed for the construction of graphical images. The novelty of this research lies in the application of mathematical morphological techniques for decimating the created images. The image created for the MW capacities of the power lines were decimated into categories and grouped into different colors for better visualization. The multi-color image is superimposed on the input image which is created for the MVA capacity of the network. The proposed method has been tested on an IEEE test system. The results from the present approach can help the planner and operator in a power station, to get a better visualization of the power network. This is the first time this kind of multi-color visualization is presented and it can be used to find the optimal path for power transfer from one bus to another.

  10. Complex Dynamics of the Power Transmission Grid (and other Critical Infrastructures)

    Science.gov (United States)

    Newman, David

    2015-03-01

    Our modern societies depend crucially on a web of complex critical infrastructures such as power transmission networks, communication systems, transportation networks and many others. These infrastructure systems display a great number of the characteristic properties of complex systems. Important among these characteristics, they exhibit infrequent large cascading failures that often obey a power law distribution in their probability versus size. This power law behavior suggests that conventional risk analysis does not apply to these systems. It is thought that much of this behavior comes from the dynamical evolution of the system as it ages, is repaired, upgraded, and as the operational rules evolve with human decision making playing an important role in the dynamics. In this talk, infrastructure systems as complex dynamical systems will be introduced and some of their properties explored. The majority of the talk will then be focused on the electric power transmission grid though many of the results can be easily applied to other infrastructures. General properties of the grid will be discussed and results from a dynamical complex systems power transmission model will be compared with real world data. Then we will look at a variety of uses of this type of model. As examples, we will discuss the impact of size and network homogeneity on the grid robustness, the change in risk of failure as generation mix (more distributed vs centralized for example) changes, as well as the effect of operational changes such as the changing the operational risk aversion or grid upgrade strategies. One of the important outcomes from this work is the realization that ``improvements'' in the system components and operational efficiency do not always improve the system robustness, and can in fact greatly increase the risk, when measured as a risk of large failure.

  11. Wind power development in the United States: Effects of policies and electricity transmission congestion

    Science.gov (United States)

    Hitaj, Claudia

    In this dissertation, I analyze the drivers of wind power development in the United States as well as the relationship between renewable power plant location and transmission congestion and emissions levels. I first examine the role of government renewable energy incentives and access to the electricity grid on investment in wind power plants across counties from 1998-2007. The results indicate that the federal production tax credit, state-level sales tax credit and production incentives play an important role in promoting wind power. In addition, higher wind power penetration levels can be achieved by bringing more parts of the electricity transmission grid under independent system operator regulation. I conclude that state and federal government policies play a significant role in wind power development both by providing financial support and by improving physical and procedural access to the electricity grid. Second, I examine the effect of renewable power plant location on electricity transmission congestion levels and system-wide emissions levels in a theoretical model and a simulation study. A new renewable plant takes the effect of congestion on its own output into account, but ignores the effect of its marginal contribution to congestion on output from existing plants, which results in curtailment of renewable power. Though pricing congestion removes the externality and reduces curtailment, I find that in the absence of a price on emissions, pricing congestion may in some cases actually increase system-wide emissions. The final part of my dissertation deals with an econometric issue that emerged from the empirical analysis of the drivers of wind power. I study the effect of the degree of censoring on random-effects Tobit estimates in finite sample with a particular focus on severe censoring, when the percentage of uncensored observations reaches 1 to 5 percent. The results show that the Tobit model performs well even at 5 percent uncensored observations

  12. Adapting AC Lines to DC Grids for Large-Scale Renewable Power Transmission

    Directory of Open Access Journals (Sweden)

    D. Marene Larruskain

    2014-10-01

    Full Text Available All over the world, governments of different countries are nowadays promoting the use of clean energies in order to achieve sustainable energy systems. In this scenario, since the installed capacity is continuously increasing, renewable sources can play an important role. Notwithstanding that, some important problems may appear when connecting these sources to the grid, being the overload of distribution lines one of the most relevant. In fact, renewable generation is usually connected to the nearest AC grid, although this HV system may not have been designed considering distributed generation. In the particular case of large wind farms, the electrical grid has to transmit all the power generated by wind energy and, as a consequence, the AC system may get overloaded. It is therefore necessary to determine the impact of wind power transmission so that appropriate measures can be taken. Not only are these measures influenced by the amount of power transmitted, but also by the quality of the transmitted power, due to the output voltage fluctuation caused by the highly variable nature of wind. When designing a power grid, although AC systems are usually the most economical solution because of its highly proven technology, HVDC may arise in some cases (e.g. offshore wind farms as an interesting alternative, offering some added values such as lower losses and better controllability. This way, HVDC technology can solve most of the aforementioned problems and has a good potential for future use. Additionally, the fast development of power electronics based on new and powerful semiconductor devices allow the spread of innovative technologies, such as VSC-HVDC, which can be applied to create DC grids. This paper focuses on the main aspects involved in adapting the existing overhead AC lines to DC grids, with the objective of improving the transmission of distributed renewable energy to the centers of consumption.

  13. Optimal wireless receiver structure for omnidirectional inductive power transmission to biomedical implants.

    Science.gov (United States)

    Gougheri, Hesam Sadeghi; Kiani, Mehdi

    2016-08-01

    In order to achieve omnidirectional inductive power transmission to biomedical implants, the use of several orthogonal coils in the receiver side (Rx) has been proposed in the past. In this paper, the optimal Rx structure for connecting three orthogonal Rx coils and the power management is found to achieve the maximum power delivered to the load (PDL) in the presence of any Rx coil tilting. Unlike previous works, in which a separate power management has been used for each coil to deliver power to the load, different resonant Rx structures for connecting three Rx coils to a single power management are studied. In simulations, connecting three Rx coils with the diameters of 3 mm, 3.3 mm, and 3.6 mm in series and resonating them with a single capacitor at the operation frequency of 100 MHz led to the maximum PDL for large loads when the implant was tilted for 45o. This optimal Rx structure achieves higher PDL in worst-case scenarios as well as reduces the number of power managements to only one.

  14. SIGNED GRAPH APPROACH IN ADAPTIVE TRANSMISSION POWER TO ENHANCE THE LIFETIME OF WIRELESS SENSOR NETWORKS

    Directory of Open Access Journals (Sweden)

    A. Babu Karuppiah

    2014-01-01

    Full Text Available A Wireless Sensor Network (WSN comprises a collection of sensor nodes networked for applications like surveillance, battlefield, monitoring of habitat. Nodes in a WSN are usually highly energy-constrained and expected to operate for long periods from limited on-board energy reserves. When a node transmits data to a destination node the data is overheard by the nodes that are in the coverage range of the transmitting node or the forwarding node. Due to this, the individual nodes might waste their energy in sensing data that are not destined to it and as a result the drain in the energy of the node is more resulting in much reduced network life time. As power is a limiting factor in a WSN, the major challenge in deploying a WSN is to enhance the network life time. So, it becomes inevitable to devise an efficient method of conserving the power. In this study, a novel algorithm, Signed Graph based Adaptive Transmission Power (SGATP is developed to avoid redundancy in sensing the data thereby enhancing the life time of the network. The concept of adapting the transmission power based on the distance of the next neighbor is proposed while a node communicates with the Cluster Head during Intrusion Detection. The simulation results show that the average network life time is greatly improvised by 96.8% when the proposed method is adopted.

  15. Design of an effective energy receiving adapter for microwave wireless power transmission application

    Directory of Open Access Journals (Sweden)

    Peng Xu

    2016-10-01

    Full Text Available In this paper, we demonstrate the viability of an energy receiving adapter in a 8×8 array form with high power reception efficiency with the resonator of artificial electromagnetic absorber being used as the element. Unlike the conventional reported rectifying antenna resonators, both the size of the element and the separations between the elements are electrically small in our design. The energy collecting process is explained with an equivalent circuit model, and a RF combining network is designed to combine the captured AC power from each element to one main terminal for AC-to-DC conversion. The energy receiving adapter yields a total reception efficiency of 67% (including the wave capture efficiency of 86% and the AC-to-DC conversion efficiency of 78%, which is quite promising for microwave wireless power transmission.

  16. Design of an effective energy receiving adapter for microwave wireless power transmission application

    Science.gov (United States)

    Xu, Peng; Wang, Shen-Yun; Geyi, Wen

    2016-10-01

    In this paper, we demonstrate the viability of an energy receiving adapter in a 8×8 array form with high power reception efficiency with the resonator of artificial electromagnetic absorber being used as the element. Unlike the conventional reported rectifying antenna resonators, both the size of the element and the separations between the elements are electrically small in our design. The energy collecting process is explained with an equivalent circuit model, and a RF combining network is designed to combine the captured AC power from each element to one main terminal for AC-to-DC conversion. The energy receiving adapter yields a total reception efficiency of 67% (including the wave capture efficiency of 86% and the AC-to-DC conversion efficiency of 78%), which is quite promising for microwave wireless power transmission.

  17. Modeling and Simulation Analysis of Power Frequency Electric Field of UHV AC Transmission Line

    Directory of Open Access Journals (Sweden)

    Chen Han

    2015-02-01

    Full Text Available In order to study the power frequency electric field of UHV AC transmission lines, this paper which models and calculates using boundary element method simulates various factors influencing the distribution of the power frequency electric field, such as the conductor arrangement, the over-ground height, the split spacing and the sub conductor radius. Different influence of various factors on the electric field distribution will be presented. In a single loop, using VVV triangular arrangement is the most secure way; in a dual loop, the electric field intensity using reverse phase sequence is weaker than that using positive phase sequence. Elevating the over-ground height and reducing the conductor split spacing will both weaken the electric field intensity, while the change of sub conductor radius can hardly cause any difference. These conclusions are important for electric power company to detect circuit.

  18. Transmission properties of all-silica fibres for high-power Nd:YAG lasers

    Science.gov (United States)

    Reng, N.; Beck, T.

    1993-04-01

    The transmission properties of two different types of all-silica fibres, step index and graded-index fibres, are investigated using a multimode high-power cw Nd:YAG rod laser. The reflections from the fibre surface back into the laser cavity affect the laser power and the beam parameters, waist diameter and divergence. A set-up for simultaneously measuring these values in front of and behind a fibre is presented. The maximum laser power transmitted by fibres is dependent upon the beam parameters, the fibre design and the surface conditions. An upper limit for the maximum divergence which can be coupled into a fibre with a certain numerical aperture without loss is given. The beam parameters behind the fibre, related to the input parameters, are presented.

  19. Power Distortion Optimization for Uncoded Linear Transformed Transmission of Images and Videos.

    Science.gov (United States)

    Xiong, Ruiqin; Zhang, Jian; Wu, Feng; Xu, Jizheng; Gao, Wen

    2017-01-01

    Recently, there is a resurgence of interest in uncoded transmission for wireless visual communication. While conventional coded systems suffer from cliff effect as the channel condition varies dynamically, uncoded linear-transformed transmission (ULT) provides elegant quality degradation for wide channel SNR range. ULT skips non-linear operations, such as quantization and entropy coding. Instead, it utilizes linear decorrelation transform and linear scaling power allocation to achieve optimized transmission. This paper presents a theoretical analysis for power-distortion optimization of ULT. In addition to the observation in our previous work that a decorrelation transform can bring significant performance gain, this paper reveals that exploiting the energy diversity in transformed signal is the key to achieve the full potential of decorrelation transform. In particular, we investigated the efficiency of ULT with exact or inexact signal statistics, highlighting the impact of signal energy modeling accuracy. Based on that, we further proposed two practical energy modeling schemes for ULT of visual signals. Experimental results show that the proposed schemes improve the quality of reconstructed images by 3~5 dB, while reducing the signal modeling overhead from hundreds or thousands of meta data to only a few meta data. The perceptual quality of reconstruction is significantly improved.

  20. Power-Distortion Optimization for Uncoded Linear-Transformed Transmission of Images and Videos.

    Science.gov (United States)

    Xiong, Ruiqin; Zhang, Jian; Wu, Feng; Xu, Jizheng; Gao, Wen

    2016-10-26

    Recently there is a resurgence of interest in uncoded transmission for wireless visual communication. While conventional coded systems suffer from cliff effect as the channel condition varies dynamically, uncoded linear-transformed transmission (ULT) provides elegant quality degradation for wide channel SNR range. ULT skips non-linear operations such as quantization and entropy coding. Instead, it utilizes linear decorrelation transform and linear scaling power allocation to achieve optimized transmission. This paper presents a theoretical analysis for power-distortion optimization of ULT. In addition to the observation in our previous work that a decorrelation transform can bring significant performance gain, this work reveals that exploiting the energy diversity in transformed signal is the key to achieve the full potential of decorrelation transform. In particular, we investigated the efficiency of ULT with exact or inexact signal statistics, highlighting the impact of signal energy modeling accuracy. Based on that, we further proposed two practical energy modeling schemes for ULT of visual signals. Experimental results show that the proposed schemes improve the quality of reconstructed images by 3 5dB, while reducing the signal modeling overhead from hundreds or thousands of meta data to only a few meta data. The perceptual quality of reconstruction is significantly improved.

  1. Multivariable time series prediction for the icing process on overhead power transmission line.

    Science.gov (United States)

    Li, Peng; Zhao, Na; Zhou, Donghua; Cao, Min; Li, Jingjie; Shi, Xinling

    2014-01-01

    The design of monitoring and predictive alarm systems is necessary for successful overhead power transmission line icing. Given the characteristics of complexity, nonlinearity, and fitfulness in the line icing process, a model based on a multivariable time series is presented here to predict the icing load of a transmission line. In this model, the time effects of micrometeorology parameters for the icing process have been analyzed. The phase-space reconstruction theory and machine learning method were then applied to establish the prediction model, which fully utilized the history of multivariable time series data in local monitoring systems to represent the mapping relationship between icing load and micrometeorology factors. Relevant to the characteristic of fitfulness in line icing, the simulations were carried out during the same icing process or different process to test the model's prediction precision and robustness. According to the simulation results for the Tao-Luo-Xiong Transmission Line, this model demonstrates a good accuracy of prediction in different process, if the prediction length is less than two hours, and would be helpful for power grid departments when deciding to take action in advance to address potential icing disasters.

  2. Transient Stability of the Power System with the Exact Long Transmission Line Model

    Directory of Open Access Journals (Sweden)

    Prechanon Kumkratug

    2012-01-01

    Full Text Available Problem statement: The exact long transmission line model consists of the lump of the series resistance, reactance and shunt capacitance. With the consideration the actual long transmission line model, it causes in the difficulty of deriving the mathematical model. Approach: This study investigates the transient stability of power system with consideration the exact long transmission line model. The concept of two-port network is applied in this study. The generator, transformer and short transmission line are represented by two-port networks. With the combination principles of the series and shunt connection, the mathematical model is achieved in a much simpler way. The proposed method is tested on the sample system and compared on various cases. Results: The first swing of rotor angle curve of the faulted system without the resistance is obviously higher than that of with the resistance whereas the second swing of the faulted system without the resistance is slightly less than that of with the resistance. The critical clearing time of the system with the resistance is better than that of with resistance. Conclusion: It was found from the simulation results that the resistance of the line provides the improvement of the first swing but not for the second swing. It was found from this study that for practical long line, the resistance is very import parameters to determine the critical clearing time of the single machine infinite system whereas shunt capacitance insignificantly affects on the critical clearing time of the single machine infinite bus system.

  3. Self-tuning wireless power transmission scheme based on on-line scattering parameters measurement and two-side power matching.

    Science.gov (United States)

    Luo, Yanting; Yang, Yongmin; Chen, Zhongsheng

    2014-04-10

    Sub-resonances often happen in wireless power transmission (WPT) systems using coupled magnetic resonances (CMR) due to environmental changes, coil movements or component degradations, which is a serious challenge for high efficiency power transmission. Thus self-tuning is very significant to keep WPT systems following strongly magnetic resonant conditions in practice. Traditional coupled-mode ways is difficult to solve this problem. In this paper a two-port power wave model is presented, where power matching and the overall systemic power transmission efficiency are firstly defined by scattering (S) parameters. Then we propose a novel self-tuning scheme based on on-line S parameters measurements and two-side power matching. Experimental results testify the feasibility of the proposed method. These findings suggest that the proposed method is much potential to develop strongly self-adaptive WPT systems with CMR.

  4. Three-Phase Time-Multiplexed Planar Power Transmission to Distributed Implants.

    Science.gov (United States)

    Lee, Byunghun; Ahn, Dukju; Ghovanloo, Maysam

    2016-03-01

    A platform has been presented for wireless powering of receivers (Rx's) that are arbitrarily distributed over a large area. A potential application could be powering of small Rx implants, distributed over large areas of the brain. The transmitter (Tx) consists of three overlapping layers of hexagonal planar spiral coils (hex-PSC) that are horizontally shifted to provide the strongest and most homogeneous electromagnetic flux coverage. The three-layer hex-PSC array is driven by a three-phase time-division-multiplexed power Tx that takes the advantage of the carrier phase shift, coil geometries, and Rx time constant to homogeneously power the arbitrarily distributed Rx's regardless of their misalignments. The functionality of the proposed three-phase power transmission concept has been verified in a detailed scaled-up high-frequency structure simulator Advanced Design System simulation model and measurement setup, and compared with a conventional Tx. The new Tx delivers 5.4 mW to each Rx and achieves, on average, 5.8% power transfer efficiency to the Rx at the worst case 90° angular misalignment, compared with 1.4% by the conventional Tx.

  5. A wearable wireless ECG monitoring system with dynamic transmission power control for long-term homecare.

    Science.gov (United States)

    Wang, Yishan; Doleschel, Sammy; Wunderlich, Ralf; Heinen, Stefan

    2015-03-01

    This paper presents a wearable wireless ECG monitoring system based on novel 3-Lead electrode placements for long-term homecare. The experiment for novel 3-Lead electrode placements is carried out, and the results show that the distance between limb electrodes can be significantly reduced. Based on the new electrode position, a small size sensor node, which is powered by a rechargeable battery, is designed to detect, amplify, filter and transmit the ECG signals. The coordinator receives the data and sends it to PC. Finally the signals are displayed on the GUI. In order to control the power consumption of sensor node, a dynamic power adjustment method is applied to automatically adjust the transmission power of the sensor node according to the received signal strength indicator (RSSI), which is related to the distance and obstacle between sensor node and coordinator. The system is evaluated when the user, who wears the sensor, is walking and running. A promising performance is achieved even under body motion. The power consumption can be significantly reduced with this dynamic power adjustment method.

  6. Resilience of electricity grids against transmission line overloads under wind power injection at different nodes.

    Science.gov (United States)

    Schiel, Christoph; Lind, Pedro G; Maass, Philipp

    2017-09-14

    A steadily increasing fraction of renewable energy sources for electricity production requires a better understanding of how stochastic power generation affects the stability of electricity grids. Here, we assess the resilience of an IEEE test grid against single transmission line overloads under wind power injection based on the dc power flow equations and a quasi-static grid response to wind fluctuations. Thereby we focus on the mutual influence of wind power generation at different nodes. We find that overload probabilities vary strongly between different pairs of nodes and become highly affected by spatial correlations of wind fluctuations. An unexpected behaviour is uncovered: for a large number of node pairs, increasing wind power injection at one node can increase the power threshold at the other node with respect to line overloads in the grid. We find that this seemingly paradoxical behaviour is related to the topological distance of the overloaded line from the shortest path connecting the wind nodes. In the considered test grid, it occurs for all node pairs, where the overloaded line belongs to the shortest path.

  7. Optimizing real power loss and voltage stability limit of a large transmission network using firefly algorithm

    Directory of Open Access Journals (Sweden)

    P. Balachennaiah

    2016-06-01

    Full Text Available This paper proposes a Firefly algorithm based technique to optimize the control variables for simultaneous optimization of real power loss and voltage stability limit of the transmission system. Mathematically, this issue can be formulated as nonlinear equality and inequality constrained optimization problem with an objective function integrating both real power loss and voltage stability limit. Transformers taps, unified power flow controller and its parameters have been included as control variables in the problem formulation. The effectiveness of the proposed algorithm has been tested on New England 39-bus system. Simulation results obtained with the proposed algorithm are compared with the real coded genetic algorithm for single objective of real power loss minimization and multi-objective of real power loss minimization and voltage stability limit maximization. Also, a classical optimization method known as interior point successive linear programming technique is considered here to compare the results of firefly algorithm for single objective of real power loss minimization. Simulation results confirm the potentiality of the proposed algorithm in solving optimization problems.

  8. Towards risk-based management of critical infrastructures : enabling insights and analysis methodologies from a focused study of the bulk power grid.

    Energy Technology Data Exchange (ETDEWEB)

    Richardson, Bryan T.; LaViolette, Randall A.; Cook, Benjamin Koger

    2008-02-01

    This report summarizes research on a holistic analysis framework to assess and manage risks in complex infrastructures, with a specific focus on the bulk electric power grid (grid). A comprehensive model of the grid is described that can approximate the coupled dynamics of its physical, control, and market components. New realism is achieved in a power simulator extended to include relevant control features such as relays. The simulator was applied to understand failure mechanisms in the grid. Results suggest that the implementation of simple controls might significantly alter the distribution of cascade failures in power systems. The absence of cascade failures in our results raises questions about the underlying failure mechanisms responsible for widespread outages, and specifically whether these outages are due to a system effect or large-scale component degradation. Finally, a new agent-based market model for bilateral trades in the short-term bulk power market is presented and compared against industry observations.

  9. 1KW Power Transmission Using Wireless Acoustic-Electric Feed-Through (WAEF)

    Science.gov (United States)

    Sherrit, S.; Bao, X.; Badescu, M.; Aldrich, J.; Bar-Cohen, Y.; Biederman, W.

    2008-01-01

    A variety of space applications require the delivery of power into sealed structures. Since the structural integrity can be degraded by holes for cabling we present an alternative method of delivering power and information using stress waves to the internal space of a sealed structure. One particular application of this technology is in sample return missions where it is critical to preserve the sample integrity and to prevent earth contamination. Therefore, the container has to be hermetically sealed and the integrity of the seal must be monitored in order to insure to a high degree of reliability the integrity of the sample return vessel. In this study we investigated the use of piezoelectric acoustic-electric power feed-through devices to transfer electric power wirelessly through a solid wall by using elastic or acoustic waves. The technology is applicable to a range of space and terrestrial applications where power is required by electronic equipment inside sealed containers, vacuum or pressure vessels, etc., where holes in the wall are prohibitive or may result in significant structural performance degradation or unnecessarily complex designs. To meet requirements of higher power applications, the feasibility to transfer kilowatts level power was investigated. Pre-stressed longitudinal piezoelectric feed-through devices were analyzed by finite element models and an equivalent circuit model was developed to predict the power transfer characteristics to different electric loads. Based on the results of the analysis a prototype device was designed, fabricated and a demonstration of the transmission of electric power up to 1.068-kW was successfully conducted. Efficiencies in the 80-90% range were also demonstrated and methods to increase the efficiency further are currently being considered.

  10. ABOUT SOME FEATURES OF TRANSMISSION MODE FOR ACTIVE POWER OF ELECTRICAL LINE

    Directory of Open Access Journals (Sweden)

    Paţiuc V.

    2013-12-01

    Full Text Available This paperwork examines the problem of maximum power transfer to the load of a long line mode change from idle line (XX to short-circuit ( SC. Load line changes from idle mode (IM to its short-circuit (SC . The line length varies from zero up to a length equal to the physical length of the electromagnetic wave. As a method of research it is used the method of the complex amplitudes (MCA. As independent variables were examined her load line length and that the system per unit change in the band plus minus unit to unit , so . It enteritis that for the active character load of the active power input and power output of the line, so functions , and functions that characterize developments efficiency , power factor at the input line and the load power factor when the variable z. For these points to the notion of critical value of the load . It founds the effect of " recession " critical resistance values and functions şi , which is not found for the other functions considered - efficiency and power factor. Load reactive power compensation can help to increase power output only for lines with length smaller than ¼ wave length electromagnitice wave. In non-distortional lines, such effect is not observed. The paper work represents the general data transmission mode the maximum power lines of different lengths to the load, which varies from idle mode (IM to short-circuit (SC regime. These data can be used for preliminary analysis of the efficiency of the electrical lines at variable load.

  11. Reduction of PAPR and Efficient detection ordering scheme for MIMO Transmission Systems Using Power Control

    Directory of Open Access Journals (Sweden)

    V.Sreevani

    2015-12-01

    Full Text Available The technical challenges for communication engineers is the development of best performance wireless networks with negligible amount of distortions. We have to consider multipath propagation attenuation and radio spectrum inefficiency. Now a days, In MIMO (Multi Input Multi Output systems there is a huge demand for the networks with the high transmission rates and better quality of service which are having low PAPR ratio. Instead of OFDMA, filter banks are used in massive MIMO to reduce the complexity. But they are error prone to noise. This base paper discusses about PAPR reduction in MIMO systems using different precoding based OFDM systems. Mainly, minimization of multi-antenna systems by controlling the transmission power and reduction of PAPR using ZC (Zadoff-Chu matrix transform.

  12. Energy harvesting and wireless energy transmission for powering SHM sensor nodes

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, Stuart G [Los Alamos National Laboratory; Farinholt, Kevin M [Los Alamos National Laboratory; Park, Gyuhae [Los Alamos National Laboratory; Farrar, Charles R [Los Alamos National Laboratory

    2009-01-01

    In this paper, we present a feasibility study of using energy harvesting and wireless energy transmission systems to operate SHM sensor nodes. The energy harvesting approach examines the use of kinetic energy harvesters to scavenge energy from the ambient sources. Acceleration measurements were made on a bridge, and serve as the basis for a series of laboratory experiments that replicate these sources using an electromagnetic shaker. We also investigated the use of wireless energy transmission systems to operate SHM sensor nodes. The goal of this investigation is to develop SHM sensing systems which can be permanently embedded in the host structure and do not require on-board power sources. This paper summarizes considerations needed to design such systems, experimental procedures and results, and additional issues that can be used as guidelines for future investigations.

  13. Transmission line design for a power distribution system at 20 kHz for aircraft

    Science.gov (United States)

    Zelby, L. W.; Mathes, J. B.; Shawver, J. W.

    1986-01-01

    A low inductance, low characteristic impedance transmission line was designed for a 20 kHz power distribution system. Several different conductor configurations were considered: strip lines, interdigitated metal ribbons, and standard insulated wires in multiwire configurations (circular and rectangular cylindrical arrangements). The final design was a rectangular arrangement of multiple wires of the same gauge with alternating polarities from wire to wire. This offered the lowest inductance per unit length (on the order of several nanohenries/meter) and the lowest characteristic impedance (on the order of one Ohm). Standard multipin connectors with gold-plated elements were recommended with this transmission line, the junction boxes to be internally connected with flat metal ribbons for low inductance, and the line to be constructed in sections of suitable length. Computer programs for the calculation of inductance of multiwire lines and of capacitances of strip lines were developed.

  14. Effects of Un-transposed UHV Transmission Line on Fault Analysis of Power Systems

    Institute of Scientific and Technical Information of China (English)

    WANG Anning; CHEN Qing; ZHOU Zhanping

    2008-01-01

    The conventional fault analysis method based on symmetrical components supposes that the three-phase parameters of un-transposed transmission line are symmetrical in case of fault. The errors caused by the method with the symmetrical distributed parameter circuit model as the equivalent circuit of the un-transposed ultra high voltage (UHV) transmission line were studied under both normal operation and fault, and the corresponding problems arising were pointed out. By contrast with electromagnetic transient and power electronics (EMTPE) simulation results with the asymmetrical distributed parameter circuit model of un-transposed line, it is shown that the conventional method cannot show the existence of negative and zero sequences before fault happening and there are many errors on voltage and current after fault happening which are different with fault types. The error ranges of voltage and current are 2.13%-81.13% and -7.82%-86.15%, respectively.

  15. Study on Seismic Control of Power Transmission Tower-Line Coupled System under Multicomponent Excitations

    Directory of Open Access Journals (Sweden)

    Li Tian

    2013-01-01

    Full Text Available The seismic control of power transmission tower-line coupled system subjected to multicomponent excitations is studied in this paper. The schematic of tuned mass damper is introduced, and equations of motion of a system with tuned mass damper under multi-component excitations are proposed. Three-dimensional finite tower-line system models are created based on practical engineering in studying the response of this system without and with control. The time domain analysis takes into account geometric nonlinearity due to finite deformation. The optimal design of the transmission tower-line system with tuned mass damper is obtained according to different mass ratio. The effects of wave travel, coherency loss, and different site conditions on the system without and with control are investigated, respectively.

  16. Analysis of power distribution grids and transmission distances. Baseline data for definition of transmission paths segments for power transmission pricing under open access; Analyse von Versorgungsflaechen. Ausgangsdaten fuer Durchleitungs-Grenzentfernungen

    Energy Technology Data Exchange (ETDEWEB)

    Haubrich, H.J.; Fritz, W.; Stobrawe, M. [RWTH Aachen (Germany). Inst. fuer Elektrische Anlagen und Energiewirtschaft

    1998-09-01

    The expert opinion for `Determination of practicable transmission paths segments for billing of power transfer operations under TPA`, commissioned by the Vereinigung Deutscher Elektrizitaetswerke (VDEW), was presented in February 1998. The study was to define on the basis of a map of existing distribution systems and system ownerships, practicable transmission distances or path segments for the billing of transfer operations. Information acquisition for the study encompassed selective documentation of geographic data and electrical characteristics of high voltage as well as medium and low voltage grids owned by companies members of VDEW. (orig./CB) [Deutsch] Im Februar 1998 wurde das im Auftrag der Vereinigung Deutscher Elektrizitaetswerke (VDEW) erstellte Gutachten `Bestimmung von praxisorientierten Grenzentfernungen fuer Durchleitungen` in Frankfurt/Main vorgestellt. Dessen Aufgabe war es, Grenzentfernungen fuer Durchleitungen im Rahmen der Verbaendevereinbarung aus der tatsaechlichen Ausdehnung realer Netze abzuleiten. Dazu wurden bei einer repraesentativen Auswahl von VDEW-Mitgliedsunternehmen charakteristische geografische und elektrische Kenngroessen von Hoch-, Mittel- und Niederspannungsnetzen erfasst. (orig.)

  17. Development of (RE)BCO cables for HTS power transmission lines

    Science.gov (United States)

    Mukoyama, S.; Yagi, M.; Masuda, T.; Amemiya, N.; Ishiyama, A.; Kashima, N.; Nagaya, S.; Aoki, Y.; Yoshizumi, M.; Yamada, Y.; Izumi, T.; Shiohara, Y.

    2009-10-01

    High-temperature superconducting (HTS) power cables transmit bulk power with lower loss than conventional cables. Moreover, HTS cables are expected to be constructed as a new underground cable in urban areas at lower cost compared to a high voltage XLPE cable. To put promising HTS cables to practical use, we need (RE)BCO tapes with long length, high critical current, and low cost. Recently many organizations have improved the performance of the (RE)BCO tapes, such as YBCO tapes, or other coated conductor tapes that are made with a variety of different processes. We have fabricated the conductors for the HTS power cable that was constructed of different kinds of (RE)BCO tapes and measured the I c and AC losses. We achieved significantly low AC loss of 0.1 W/m at 1 kA in the HTS conductor using narrow slit tapes that were cut by laser. Moreover, a 20 m long HTS power cable model and a cable intermediate joint were developed. Short circuit current tests were conducted on the cable system that consisted of two 10 m cables, a cable joint, and two terminations. The cables and the joint withstood the short circuit current of 31.5 kA for 2 s without damage.

  18. Development of (RE)BCO cables for HTS power transmission lines

    Energy Technology Data Exchange (ETDEWEB)

    Mukoyama, S., E-mail: mukoyama@ch.furukawa.co.j [Furukawa Electric Co. Ltd., Ichihara 290-8555 (Japan); Yagi, M. [Furukawa Electric Co. Ltd., Ichihara 290-8555 (Japan); Masuda, T. [Sumitomo Electric Industries, Ltd., Osaka 554-0024 (Japan); Amemiya, N. [Kyoto University, Kyoto 615-8510 (Japan); Ishiyama, A. [Waseda University, Tokyo 169-8555 (Japan); Kashima, N.; Nagaya, S. [Chubu Electric Power Co. Inc., Nagoya 459-8522 (Japan); Aoki, Y. [Showa Cable System Co. Ltd., Sagamihara 229-1133 (Japan); Yoshizumi, M.; Yamada, Y.; Izumi, T.; Shiohara, Y. [Superconductivity Research Laboratory, Tokyo 135-0062 (Japan)

    2009-10-15

    High-temperature superconducting (HTS) power cables transmit bulk power with lower loss than conventional cables. Moreover, HTS cables are expected to be constructed as a new underground cable in urban areas at lower cost compared to a high voltage XLPE cable. To put promising HTS cables to practical use, we need (RE)BCO tapes with long length, high critical current, and low cost. Recently many organizations have improved the performance of the (RE)BCO tapes, such as YBCO tapes, or other coated conductor tapes that are made with a variety of different processes. We have fabricated the conductors for the HTS power cable that was constructed of different kinds of (RE)BCO tapes and measured the I{sub c} and AC losses. We achieved significantly low AC loss of 0.1 W/m at 1 kA in the HTS conductor using narrow slit tapes that were cut by laser. Moreover, a 20 m long HTS power cable model and a cable intermediate joint were developed. Short circuit current tests were conducted on the cable system that consisted of two 10 m cables, a cable joint, and two terminations. The cables and the joint withstood the short circuit current of 31.5 kA for 2 s without damage.

  19. A novel synthetic test system for thyristor level in the converter valve of HVDC power transmission

    Directory of Open Access Journals (Sweden)

    Liu Longchen

    2016-01-01

    Full Text Available The converter valve is the core equipment in the HVDC power transmission system, a+-nd its performance has a direct effect on the reliability, stability and efficiency of the whole power system. As the basic unit of HVDC converter valve, the thyristor level needs to be test routinely in order to grasp the state of the converter valve equipment. Therefore, it is urgent to develop a novel synthetic test system for the thyristor level with thyristor control unit (TCU. However, currently there is no specific test scheme for the thyristor level of HVDC converter valve. In this paper, the synthetic test principle, content and methods for the thyristor level with TCU are presented based on the analysis of the thyristor reverse recovery characteristic and the IEC technology standard. And a transient high-voltage pulse is applied to the thyristor level during its reverse recovery period in order to test the characteristics of thyristor level. Then, the synthetic test system for the thyristor level is applied to the converter valve test of ±800 kV HVDC power transmission project, and the practical test result verifies the reasonability and validity of the proposed synthetic test system.

  20. Cryogenic Fiber Optic Sensors for Superconducting Magnets and Power Transmission Lines in High Energy Physics Applications

    CERN Document Server

    AUTHOR|(CDS)2081689; Bajko, Marta

    In the framework of the Luminosity upgrade of the Large Hadron Collider (HL - LHC), a remarkable R&D effort is now ongoing at the European Organization for Nuclear Research (CERN) in order to develop a new generation of accelerator magnets and superconducting power transmission lines. The magnet technology will be based on Nb3Sn enabling to operate in the 11 - 13 T range. In parallel, in order to preserve the power converters from the increasing radiation level, high power transmission lines are foreseen to feed the magnets from free - radiation zones. These will be based on high temperature superconductors cooled down with helium gas in the range 5 - 30 K. The new technologies will require advanced design and fabrication approaches as well as adapted instrumentation for monitoring both the R&D phase and operation. Resistive sensors have been used so far for voltage, temperature and strain monitoring but their integration still suffers from the number of electrical wires and the complex compensation o...