WorldWideScience

Sample records for buildings sector analysis

  1. Lost Opportunities in the Buildings Sector: Energy-Efficiency Analysis and Results

    Energy Technology Data Exchange (ETDEWEB)

    Dirks, James A.; Anderson, David M.; Hostick, Donna J.; Belzer, David B.; Cort, Katherine A.

    2008-09-12

    This report summarizes the results and the assumptions used in an analysis of the potential “lost efficiency opportunities” in the buildings sector. These targets of opportunity are those end-uses, applications, practices, and portions of the buildings market which are not currently being addressed, or addressed fully, by the Building Technologies Program (BTP) due to lack of resources. The lost opportunities, while a significant increase in effort and impact in the buildings sector, still represent only a small portion of the full technical potential for energy efficiency in buildings.

  2. Tipping points for carbon dioxide and air pollution benefits: an energy systems analysis of natural gas verses electric technologies in the U.S. buildings sector

    Science.gov (United States)

    Our analysis examines emission trade-offs between electricity and natural gas use in the buildings sector at the system level, including upstream emissions from the electric sector and natural gas mining emissions.

  3. Overview and analysis of current BIPV products: new criteria for supporting the technological transfer in the building sector

    Directory of Open Access Journals (Sweden)

    Pierluigi Bonomo

    2015-12-01

    Full Text Available The growing demand for nearly-Zero Energy Buildings is rapidly contributing to change the building skin from being a passive barrier towards a sensitive and active interface. Building Integrated Photovoltaics (BIPV is a unique solution for delivering clean, safe, affordable and decentralized electricity to people transforming the building surfaces in active solar collectors. Despite photovoltaic (PV technology and their basic usage are today known to everybody, the particular requirements for building integration have brought to the surface some issues over the years so that BIPV is still a niche market. Starting from this observation, the paper presents the results of an investigation on the current market of BIPV products for roofs and façade. The analysis aimed to identify the relevant possibilities the products today offer and the level of information that the producers make available within the technical description of BIPV systems. After disclosing the actual lack of information in comparison to conventional building products, the authors propose to implement a new “building-based” approach that could support the BIPV market by including a more comprehensive description of the product’s quality (today mainly comprising electrical and basic physical features. Such a “building-technology” perspective, also considering the recent normative framework in BIPV field, is expected to encourage the technological transfer of PV in the building sector by facilitating the daily work of architects, installers and the whole value chain.

  4. [Evaluation of residual osteomuscular function using computerised movement analysis for building sector workers: specificity and technical problem].

    Science.gov (United States)

    D'Orso, M I; Centemeri, R; Latocca, R; Riva, M; Cesana, G

    2012-01-01

    Occupational Health Doctors active in building sector firms frequently have to evaluate residual workers' osteomuscular function in patients coming back to work after an accident happened during work time or free time. Definition of their specific individual work suitability is usually carried out utilizing semeiotic tests in which subjective evaluation of every single Medical Doctor is real important in definition of final results and this fact can cause legal controversies. In our research we describe the application of computerised movement analysis on 10 workers of building sector. In every patient examined this technical method has been able to study objectively the tridimensional ranges of motion of most important osteomuscular districts. The possibility to have an objective evaluation of residual osteomuscular function has a relevant importance both in definition of workers' work suitability at the moment in which they start again their activities and in possible future legal conflicts.

  5. Building regulatory enforcement regimes : Comparative analysis of private sector involvement in the enforcement of public building regulations

    NARCIS (Netherlands)

    Van der Heijden, J.J.

    2009-01-01

    It is often assumed that traditional regulatory regimes centered on governmental action will benefit from greater private sector involvement. And, under the catchy phrase "from government to governance" globally a wide variety of hybrid forms of governance has emerged. However, little empirical

  6. Using the organizational network analysis to build competitiveness on the example of enterprise energy sector

    Directory of Open Access Journals (Sweden)

    Wawrzynek Łukasz

    2016-12-01

    Full Text Available Contemporary organizations operate in dynamic, complex markets. One of the directions of their development is the increase of competitiveness level. This level must be based on factors for building competitive advantage, clear for the given organization, or, in a broader sense, based on general conditions for the increase of competitiveness. One of these directions could be innovation, which would lead to development and the gaining of new markets. Being innovative depends on the ideas and their implementation. This in turn depends on knowledge, primarily tacit knowledge, which is associated with the employees. To identify it, and next lead to its diffusion and application, the organization must learn the dependencies in which employees function, and match to them certain actions that would result in the increase of innovation potential. The learning of the actual relations is possible with the application of the organizational network analysis. This paper presents an example of applying organizational networks in an enterprise, on the basis of a conducted study. The results suggest that such tools are useful and that the organization, after the interventions it launched, achieves in the analyzed area a level of competitiveness higher than in other areas.

  7. Analysis of energy use in building services of the industrial sector in California: A literature review and a preliminary characterization

    Energy Technology Data Exchange (ETDEWEB)

    Akbari, H.; Borgers, T.; Gadgil, A.; Sezgen, O.

    1991-04-01

    Energy use patterns in many of California's fastest-growing industries are not typical of those in the mix of industries elsewhere in the US. Many California firms operate small and medium-sized facilities, often in buildings used simultaneously or interchangeably for commercial (office, retail, warehouse) and industrial activities. In these industrial subsectors, the energy required for building services'' to provide occupant comfort and necessities (lighting, HVAC, office equipment, computers, etc.) may be at least as important as the more familiar process energy requirements -- especially for electricity and on-peak demand. In this report, published or unpublished information on energy use for building services in the industrial sector have been compiled and analyzed. Seven different sources of information and data relevant to California have been identified. Most of these are studies and/or projects sponsored by the Department of Energy, the California Energy Commission, and local utilities. The objectives of these studies were diverse: most focused on industrial energy use in general, and, in one case, the objective was to analyze energy use in commercial buildings. Only one of these studies focused directly on non-process energy use in industrial buildings. Our analysis of Northern California data for five selected industries shows that the contribution of total electricity consumption for lighting ranges from 9.5% in frozen fruits to 29.1% in instruments; for air-conditioning, it ranges from nonexistent in frozen fruits to 35% in instrument manufacturing. None of the five industries selected had significant electrical space heating. Gas space heating ranges from 5% in motor vehicles facilities to more than 58% in the instrument manufacturing industry. 15 refs., 15 figs., 9 tabs.

  8. Public Interest Energy Research (PIER) Program. Final Project Report. California Energy Balance Update and Decomposition Analysis for the Industry and Building Sectors

    Energy Technology Data Exchange (ETDEWEB)

    de la Rue du Can, Stephane [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Hasanbeigi, Ali [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Sathaye, Jayant [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2010-12-01

    This report on the California Energy Balance version 2 (CALEB v2) database documents the latest update and improvements to CALEB version 1 (CALEB v1) and provides a complete picture of how energy is supplied and consumed in the State of California. The CALEB research team at Lawrence Berkeley National Laboratory (LBNL) performed the research and analysis described in this report. CALEB manages highly disaggregated data on energy supply, transformation, and end-use consumption for about 40 different energy commodities, from 1990 to 2008. This report describes in detail California's energy use from supply through end-use consumption as well as the data sources used. The report also analyzes trends in energy demand for the "Manufacturing" and "Building" sectors. Decomposition analysis of energy consumption combined with measures of the activity driving that consumption quantifies the effects of factors that shape energy consumption trends. The study finds that a decrease in energy intensity has had a very significant impact on reducing energy demand over the past 20 years. The largest impact can be observed in the industry sector where energy demand would have had increased by 358 trillion British thermal units (TBtu) if subsectoral energy intensities had remained at 1997 levels. Instead, energy demand actually decreased by 70 TBtu. In the "Building" sector, combined results from the "Service" and "Residential" subsectors suggest that energy demand would have increased by 264 TBtu (121 TBtu in the "Services" sector and 143 TBtu in the "Residential" sector) during the same period, 1997 to 2008. However, energy demand increased at a lesser rate, by only 162 TBtu (92 TBtu in the "Services" sector and 70 TBtu in the "Residential" sector). These energy intensity reductions can be indicative of energyefficiency improvements during the past 10 years. The research presented in this report provides a basis for developing an energy-efficiency performance index to measure

  9. End use technology choice in the National Energy Modeling System (NEMS): An analysis of the residential and commercial building sectors

    International Nuclear Information System (INIS)

    Wilkerson, Jordan T.; Cullenward, Danny; Davidian, Danielle; Weyant, John P.

    2013-01-01

    The National Energy Modeling System (NEMS) is arguably the most influential energy model in the United States. The U.S. Energy Information Administration uses NEMS to generate the federal government's annual long-term forecast of national energy consumption and to evaluate prospective federal energy policies. NEMS is considered such a standard tool that other models are calibrated to its forecasts, in both government and academic practice. As a result, NEMS has a significant influence over expert opinions of plausible energy futures. NEMS is a massively detailed model whose inner workings, despite its prominence, receive relatively scant critical attention. This paper analyzes how NEMS projects energy demand in the residential and commercial sectors. In particular, we focus on the role of consumers' preferences and financial constraints, investigating how consumers choose appliances and other end-use technologies. We identify conceptual issues in the approach the model takes to the same question across both sectors. Running the model with a range of consumer preferences, we estimate the extent to which this issue impacts projected consumption relative to the baseline model forecast for final energy demand in the year 2035. In the residential sector, the impact ranges from a decrease of 0.73 quads (− 6.0%) to an increase of 0.24 quads (+ 2.0%). In the commercial sector, the impact ranges from a decrease of 1.0 quads (− 9.0%) to an increase of 0.99 quads (+ 9.0%). - Highlights: • This paper examines the impact of consumer preferences on final energy in the Commercial and Residential sectors of the National Energy Modeling System (NEMS). • We describe the conceptual and empirical basis for modeling consumer technology choice in NEMS. • We offer a range of alternative parameters to show the energy demand sensitivity to technology choice. • We show there are significant potential savings available in both building sectors. • Because the model uses its own

  10. Sustainable innovation in the building sector. An analysis of chances and constraints; Duurzame innovatie in de bouwsector. Een analyse van kansen en belemmeringen

    Energy Technology Data Exchange (ETDEWEB)

    Suurs, R. [TNO, Delft (Netherlands); Van Niekerk, E.; Van Barreveld, C. [3D BluePrint, Amsterdam (Netherlands); Urlings, M. [LSWA architecten, Oirschot (Netherlands)

    2011-04-15

    Building Brains has been set up by TNO as a cooperative and started September 21, 2009. The aim of the project was to answer the question how the energy consumption in the Netherlands can be reduced by 50% up to 2030 or how the built environment can be made energy-neutral. This issue of the magazine is dedicated to Building Brains project. The building construction sector is in need for sustainable innovation. This transition process calls for new organisational forms, new regulations, shifting markets, etc. To establish this, firms and governments should join forces to set up a network that stimulates and fosters sustainable innovation, an Innovation System. This is the only way to successfully support sustainable innovations in the construction sector. An Innovation System Analysis of the development of 'Building Information Systems' provides insights in the actual opportunities and threats offered by innovation in current building practice. [Dutch] Building Brains is een door TNO opgezet samenwerkingsproject dat op 21 september 2009 van start ging. Het doel van het project is antwoord te geven op de vraag hoe tot 2030 het energiegebruik in Nederland kan worden gehalveerd of hoe de gebouwde omgeving energieneutraal kan worden gemaakt. Deze aflevering van het tijdschrift TVVL is vrijwel geheel gewijd aan het Building Brains project. Onder druk van een veranderende wereld en forse economische terugval, neemt de roep om duurzame innovatie in de bouwsector toe. Dit vraagt om nieuwe organisatiestructuren, aangepaste regelgeving, opkomende markten, etc. Bedrijven en overheden zullen samen een netwerk moeten opbouwen dat duurzame innovatie faciliteert en versnelt. Alleen zo krijgen opkomende innovaties de kans om de bouwsector ingrijpend te veranderen. Een 'lnnovatie Systeem Analyse' (lSA) van de Nederlandse ontwikkelingen op het gebied van Bouw Informatie Modellen (BIM) geeft inzicht in de kansen en belemmeringen.

  11. Energy savings in CSFR - building sector

    International Nuclear Information System (INIS)

    Jacobsen, F.R.

    1993-01-01

    The Czechoslovak/Danish project on energy savings in buildings proves that it is possible to save up to 30% of the energy in buildings. 10% can be saved at an investment of 27 bill KCS. The total investment that is needed to save 30% is 140 bill KCS. Further energy savings can be obtained through more energy efficient supply systems. Information dissemination is important for the energy saving programme as are economic incentives. Investments in energy savings should be profitable for the investor, but this is not the case in the Czech and Slovak republics today. Changes are needed. Energy prices are still to low, compared to investment costs. Financial possibilities are not satisfactory for private investors. Price systems are not favourable to investment in energy savings. Training is needed for boiler men and energy consultants. Legislation is essential for the support of the full range of activities in the energy sector. Research and Development activities must back up the development of the sector. Pilot projects can illuminate the savings potential. The production of technical equipment for control and metering and production of insulation materials must be promoted. (AB)

  12. Analysis of leading sector of Jambi City

    Directory of Open Access Journals (Sweden)

    Hardiani Hardiani

    2017-09-01

    Full Text Available This study aims to analyze the leading sectors in the city of Jambi. The main data used is GDP data of Jambi City series 2010 for the period of 2012-2014. Analysis tool that is used are Location Quotient, Shift Share, Klassen Typology and Overlay Analysis. The results of the analysis found that of the 14 basic sectors in Jambi City (based on LQ analysis, there are four priority sectors namely electricity and gas procurement, building, large and retail trade, car and motorcycle repairs, health service, and social activities. Keywords: Location Quotient, Shift Share, Klassen Tipology, Overlay Analysis

  13. Energy Sector Market Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Arent, D.; Benioff, R.; Mosey, G.; Bird, L.; Brown, J.; Brown, E.; Vimmerstedt, L.; Aabakken, J.; Parks, K.; Lapsa, M.; Davis, S.; Olszewski, M.; Cox, D.; McElhaney, K.; Hadley, S.; Hostick, D.; Nicholls, A.; McDonald, S.; Holloman, B.

    2006-10-01

    This paper presents the results of energy market analysis sponsored by the Department of Energy's (DOE) Weatherization and International Program (WIP) within the Office of Energy Efficiency and Renewable Energy (EERE). The analysis was conducted by a team of DOE laboratory experts from the National Renewable Energy Laboratory (NREL), Oak Ridge National Laboratory (ORNL), and Pacific Northwest National Laboratory (PNNL), with additional input from Lawrence Berkeley National Laboratory (LBNL). The analysis was structured to identify those markets and niches where government can create the biggest impact by informing management decisions in the private and public sectors. The analysis identifies those markets and niches where opportunities exist for increasing energy efficiency and renewable energy use.

  14. Building control in Australia; experiences with private sector involvement

    NARCIS (Netherlands)

    Van der Heijden, J.J.

    2008-01-01

    Facing issues with regulatory enforcement through municipal agencies, governments in Australia have reformed the enforcement of public building regulations. As a result, the private sector has been introduced in building regulatory enforcement regimes with differences amongst jurisdictions. In this

  15. Methodology for Modeling Building Energy Performance across the Commercial Sector

    Energy Technology Data Exchange (ETDEWEB)

    Griffith, B.; Long, N.; Torcellini, P.; Judkoff, R.; Crawley, D.; Ryan, J.

    2008-03-01

    This report uses EnergyPlus simulations of each building in the 2003 Commercial Buildings Energy Consumption Survey (CBECS) to document and demonstrate bottom-up methods of modeling the entire U.S. commercial buildings sector (EIA 2006). The ability to use a whole-building simulation tool to model the entire sector is of interest because the energy models enable us to answer subsequent 'what-if' questions that involve technologies and practices related to energy. This report documents how the whole-building models were generated from the building characteristics in 2003 CBECS and compares the simulation results to the survey data for energy use.

  16. Assessment of energy efficiency options in the building sector of Lebanon

    International Nuclear Information System (INIS)

    Chedid, R.B.; Ghajar, R.F.

    2004-01-01

    This paper examines the merits of implementing energy efficiency policies in the building sector in Lebanon following the approach normally adopted in Climate Change studies. The paper first examines the impact of the energy sector on the Lebanese economy, and then assesses the feasibility of implementing suitable energy efficiency options in the building sector. For this purpose, a detailed analysis of the building sector in Lebanon is presented with emphasis on the thermal characteristics of building envelopes and the energy consuming equipment. The long-term benefits of applying energy efficiency options in the building sector are then assessed using a scenario-type analysis that compares these benefits against those of a baseline scenario that assumes no significant implementation of energy efficiency policies. Finally, feasible options are highlighted and recommendations to remove the major barriers hindering the penetration of energy efficiency options in the Lebanese market are provided

  17. The scientific production of Italian agricultural engineers: a bibliometric network analysis concerning the scientific sector AGR/10 Rural buildings and agro-forestry territory

    Directory of Open Access Journals (Sweden)

    Andrea De Montis

    2017-03-01

    Full Text Available According to a worldwide well-known attitude, also in Italy, the assessment of scientific production in the last decades has been progressively based on the analysis of the impact through bibliometric variables. Various data sets, such as Scopus by Elsevier and Web of Science by Thomson Reuters, are designed and maintained to index a steadily increasing range of essays: mostly journal articles, book chapters, and conference proceedings. The indexing relays on the capacity to evaluate and update specific impact measures by keeping track of the citations representing the relations between the essays. The related opportunity to interpret bibliographic systems as research and development (R&D networks attracted the interest of scientists operating, beyond the field of bibliometric analysis, in the realm of social networking. Network analysis belongs to mechanical statistics and is able to make sense of interconnected systems including very large sets of nodes and links. In this paper, we present a network approach to the review of the scientific production in the time period January, 2003-June, 2016 of Italian agricultural engineers, namely scientists belonging to the Italian ministerial scientific disciplinary sector AGR/10 - rural buildings and agro-forestry territory. Starting from 238 articles indexed in the Web of Knowledge database and published by 87 AGR/10 scholars, we apply four network analysis approaches to the study of the citations among articles, the most influential journals and topics, the co-authorship, the most favourite keywords with their evolution in time, and the communities’ pattern. We discover that Italian agricultural engineers are interlaced in a sparse network with a still limited tendency toward citing each other and are inclined to team up in established research groups based on a single university. As for the dualism between rural buildings and territory, we document on a relevant expansion of the issues related to

  18. Building energy analysis tool

    Science.gov (United States)

    Brackney, Larry; Parker, Andrew; Long, Nicholas; Metzger, Ian; Dean, Jesse; Lisell, Lars

    2016-04-12

    A building energy analysis system includes a building component library configured to store a plurality of building components, a modeling tool configured to access the building component library and create a building model of a building under analysis using building spatial data and using selected building components of the plurality of building components stored in the building component library, a building analysis engine configured to operate the building model and generate a baseline energy model of the building under analysis and further configured to apply one or more energy conservation measures to the baseline energy model in order to generate one or more corresponding optimized energy models, and a recommendation tool configured to assess the one or more optimized energy models against the baseline energy model and generate recommendations for substitute building components or modifications.

  19. Energy Consumption Forecasting for University Sector Buildings

    Directory of Open Access Journals (Sweden)

    Khuram Pervez Amber

    2017-10-01

    Full Text Available Reliable energy forecasting helps managers to prepare future budgets for their buildings. Therefore, a simple, easier, less time consuming and reliable forecasting model which could be used for different types of buildings is desired. In this paper, we have presented a forecasting model based on five years of real data sets for one dependent variable (the daily electricity consumption and six explanatory variables (ambient temperature, solar radiation, relative humidity, wind speed, weekday index and building type. A single mathematical equation for forecasting daily electricity usage of university buildings has been developed using the Multiple Regression (MR technique. Data of two such buildings, located at the Southwark Campus of London South Bank University in London, have been used for this study. The predicted test results of MR model are examined and judged against real electricity consumption data of both buildings for year 2011. The results demonstrate that out of six explanatory variables, three variables; surrounding temperature, weekday index and building type have significant influence on buildings energy consumption. The results of this model are associated with a Normalized Root Mean Square Error (NRMSE of 12% for the administrative building and 13% for the academic building. Finally, some limitations of this study have also been discussed.

  20. Building Capacity in the Public Utility Sectors of Basra, Iraq

    National Research Council Canada - National Science Library

    Trainor, Tim; Henderson, Dale

    2007-01-01

    ... in provincial reconstruction efforts. Specifically, the mission was to assist in building the capacity of the public sector utility leadership in project prioritization, project planning and project management in order to enhance...

  1. Implementation of BIM in the Danish Building Sector

    DEFF Research Database (Denmark)

    Ussing, Lene Faber; Larsen, Jesper Kranker

    2014-01-01

    The Danish building sector has now for some years worked for implementation of BIM in the whole building process. In practice, it seems with the long way from the wish of using BIM in the whole building process to what really happens on the projects and building sites. To get an idea of how long...... the BIM implementation has come in the sector, a contractor company at present involved in one of the biggest public construction projects in Denmark was contacted to survey some employees at the project, because such a project ought to be one where BIM is best implemented. This survey shows the building...... sector is implementing BIM, but there are still big challenges to solve both internally in the company and externally both in the immediate environment and distant environment....

  2. Modelling energy demand in the buildings sector within the EU

    Energy Technology Data Exchange (ETDEWEB)

    O Broin, Eoin

    2012-11-01

    In the on-going effort within the EU to tackle greenhouse gas emissions and secure future energy supplies, the buildings sector is often referred to as offering a large potential for energy savings. The aim of this thesis is to produce scenarios that highlight the parameters that affect the energy demands and thus potentials for savings of the building sector. Top-down and bottom-up approaches to modelling energy demand in EU buildings are applied in this thesis. The top-down approach uses econometrics to establish the historical contribution of various parameters to energy demands for space and water heating in the residential sectors of four EU countries. The bottom-up approach models the explicit impact of trends in energy efficiency improvement on total energy demand in the EU buildings stock. The two approaches are implemented independently, i.e., the results from the top-down studies do not feed into those from the bottom-up studies or vice versa. The explanatory variables used in the top-down approach are: energy prices; heating degree days, as a proxy for outdoor climate; a linear time trend, as a proxy for technology development; and the lag of energy demand, as a proxy for inertia in the system. In this case, inertia refers to the time it takes to replace space and water heating systems in reaction to price changes. The analysis gives long-term price elasticities of demand as follows: for France, -0.17; for Italy, -0.35; for Sweden, -0.27; and for the UK, -0.35. These results reveal that the price elasticity of demand for space and water heating is inelastic in each of these cases. Nonetheless, scenarios created for the period up to 2050 using these elasticities and an annual price increase of 3 % show that demand can be reduced by more than 1 % per year in France and Sweden and by less than 1 % per year in Italy and the UK. In the bottom-up modelling, varying rates for conversion efficiencies, heating standards for new buildings, end-use efficiency, and

  3. Building Energy Monitoring and Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Tianzhen; Feng, Wei; Lu, Alison; Xia, Jianjun; Yang, Le; Shen, Qi; Im, Piljae; Bhandari, Mahabir

    2013-06-01

    U.S. and China are the world’s top two economics. Together they consumed one-third of the world’s primary energy. It is an unprecedented opportunity and challenge for governments, researchers and industries in both countries to join together to address energy issues and global climate change. Such joint collaboration has huge potential in creating new jobs in energy technologies and services. Buildings in the US and China consumed about 40% and 25% of the primary energy in both countries in 2010 respectively. Worldwide, the building sector is the largest contributor to the greenhouse gas emission. Better understanding and improving the energy performance of buildings is a critical step towards sustainable development and mitigation of global climate change. This project aimed to develop a standard methodology for building energy data definition, collection, presentation, and analysis; apply the developed methods to a standardized energy monitoring platform, including hardware and software, to collect and analyze building energy use data; and compile offline statistical data and online real-time data in both countries for fully understanding the current status of building energy use. This helps decode the driving forces behind the discrepancy of building energy use between the two countries; identify gaps and deficiencies of current building energy monitoring, data collection, and analysis; and create knowledge and tools to collect and analyze good building energy data to provide valuable and actionable information for key stakeholders.

  4. Building Resilience in Nigeria's Energy Sector for Sustainable ...

    African Journals Online (AJOL)

    Resilience is the capacity of a system to absorb disturbance and reorganize while undergoing change so as to still retain essentially the same function, structure, identity, and feedbacks. Incidentally, Nigeria's energy sector is the heart beat of the nation. This paper therefore analyses resilience building efforts in Nigeria's ...

  5. Radical programmes for developing the EU residential building sector

    NARCIS (Netherlands)

    Oostra, Mieke; Huovinen, Pekka

    2016-01-01

    The economic recession has hit especially hard the residential building sector in the EU region, e.g., the number of the housing completions has decreased -49% and the total residential output has been squeezed down by -24% between 2007 and 2014 (Euroconstruct, 2015). In turn, the aim of our paper

  6. Building and testing models with extended Higgs sectors

    Science.gov (United States)

    Ivanov, Igor P.

    2017-07-01

    Models with non-minimal Higgs sectors represent a mainstream direction in theoretical exploration of physics opportunities beyond the Standard Model. Extended scalar sectors help alleviate difficulties of the Standard Model and lead to a rich spectrum of characteristic collider signatures and astroparticle consequences. In this review, we introduce the reader to the world of extended Higgs sectors. Not pretending to exhaustively cover the entire body of literature, we walk through a selection of the most popular examples: the two- and multi-Higgs-doublet models, as well as singlet and triplet extensions. We will show how one typically builds models with extended Higgs sectors, describe the main goals and the challenges which arise on the way, and mention some methods to overcome them. We will also describe how such models can be tested, what are the key observables one focuses on, and illustrate the general strategy with a subjective selection of results.

  7. U.S. Building-Sector Energy Efficiency Potential

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Rich; Borgeson, Sam; Koomey, Jon; Biermayer, Peter

    2008-09-30

    This paper presents an estimate of the potential for energy efficiency improvements in the U.S. building sector by 2030. The analysis uses the Energy Information Administration's AEO 2007 Reference Case as a business-as-usual (BAU) scenario, and applies percentage savings estimates by end use drawn from several prior efficiency potential studies. These prior studies include the U.S. Department of Energy's Scenarios for a Clean Energy Future (CEF) study and a recent study of natural gas savings potential in New York state. For a few end uses for which savings estimates are not readily available, the LBNL study team compiled technical data to estimate savings percentages and costs of conserved energy. The analysis shows that for electricity use in buildings, approximately one-third of the BAU consumption can be saved at a cost of conserved energy of 2.7 cents/kWh (all values in 2007 dollars), while for natural gas approximately the same percentage savings is possible at a cost of between 2.5 and 6.9 $/million Btu. This cost-effective level of savings results in national annual energy bill savings in 2030 of nearly $170 billion. To achieve these savings, the cumulative capital investment needed between 2010 and 2030 is about $440 billion, which translates to a 2-1/2 year simple payback period, or savings over the life of the measures that are nearly 3.5 times larger than the investment required (i.e., a benefit-cost ratio of 3.5).

  8. Literature review on skills development frameworks for small and medium-sized contractors in the green building sector

    CSIR Research Space (South Africa)

    Dlungwana, Sihle

    2018-01-01

    Full Text Available on skills development frameworks for small and medium-sized contractors in the green building sector Sihle Dlungwana Senior Researcher, CSIR Built Environment Unit Introduction In 2011 the Department of Public Works adopted a Green Building... of their characteristics. Thematic analysis was used to analyse a number of articles in order to develop an appropriate framework for supporting future skills development programmes and tools for the green building sector. Defining a green contractor Generally...

  9. Green Buildings in Singapore; Analyzing a Frontrunner’s Sectoral Innovation System

    Directory of Open Access Journals (Sweden)

    Vidushini Siva

    2017-05-01

    Full Text Available The building sector in Singapore consumes up to half of the nation’s total energy. The government has therefore been urging the transformation of the industry by targeting 80% of all buildings to be green-certified by 2030. Thus far, Singapore has done relatively well, and is widely viewed as frontrunner in this respect. This paper addresses the question: what are the benefits and limitations of Singapore’s sectoral innovation system in spurring an energy transition in the building sector, in particular by up-scaling the use of green building technology? The Sectoral Innovation Systems (SIS theoretical framework was used to analyze the Singapore case. Four SIS components were assessed: technological regime, market demand, actor interactions and networks, and institutional framework. The benefits of Singapore’s sectoral innovation system identified in the analysis basically concern aspects of all of the four elements of SIS. Particular success factors concerned the launching of an integrated strategy to support green building innovations (i.e., the Green Mark policy scheme, implementing support policies, and setting up test beds. Furthermore, a masterplan to engage and educate end-users was implemented, knowledge exchange platforms were set up, regulations on the use of efficient equipment in buildings were issued, and standards and a certification system were adopted. The results also shed light on key barriers, namely, the reluctance of building users to change their habits, ineffective stakeholder collaboration, and green buildings innovation support coming from the government only. Measures in place have been moderately effective.

  10. Evaluating public policy instruments in the Greek building sector

    International Nuclear Information System (INIS)

    Spyridaki, Niki-Artemis; Banaka, Stefania; Flamos, Alexandros

    2016-01-01

    This paper applies a multi-criteria analysis (MCA) to evaluate public policy mechanisms that foster energy efficiency and renewable energy sources in the Greek building sector, based on stakeholders’ understanding and perceptions of the functionality of policy instruments. The objective is to shed light on the implementation of currently employed policy mechanisms that aim to achieve the 2020 energy savings targets and beyond, providing useful information to policy makers for future policy (re-) formulations. In this framework, policy instruments were evaluated against process-related criteria, such as implementation costs, distributional effects, and coherence of policy processes, so as to highlight successful policy practices during their implementation phase as well as to unveil cases of policy underperformance or unintended policy outcomes. To hedge uncertainties related to policy instrument selection, the method employs probabilistic evaluations of every alternative against each criterion. The MCA results showed that the country is still missing significant energy saving opportunities that could be reached through more streamlined implementation practices and political support. In times of fiscal crisis, the Greek government should also revitalize the implementation of alternative funding mechanisms and support policy alternatives such as green public procurement, voluntary agreements, and energy performance contracting. - Highlights: • We apply an MCA analysis to evaluate EE and RES policies instruments. • We focus on the implementation stage through qualitative criteria and ordinal scales. • We use the probabilistic evaluations of each alternative against each criterion. • We provide rankings of instruments according to process related criteria. • Greece should revitalize the implementation of funding mechanisms, GPP and VAs.

  11. China. Top Sector Energy. Sustainable Building. Opportunities for Dutch companies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-08-15

    For China, sustainable design is necessary for controlling energy usage in crowded and constantly expanding urban areas. It is well known that China is the world's biggest construction market. Nearly half of the new buildings annually constructed worldwide are located in China by 2015. However, only about 4% of these are built according to energy efficiency standards. China's construction market will by 2020 account for 40% of the country's total energy consumption. While it contributes 15% of the world's GDP, China consumes 30% of the earth's steel and half its concrete. On top of which, buildings in China consume a third of the country's increasingly endangered water supplies. Recent research showed that almost half of the national energy consumption has been used for construction related purposes. Of existing buildings, a huge amount needs sustainable redesign and retrofitting technologies.Chinese government has recognized the urgency of widely implementing sustainable buildings. As a result, a national 3-star China National Green Building rating system has been launched in 2006. Yet the Chinese green building revolution is still in its infancy. Main problems are, amongst others, low level of regulations and standards, problematic implementations at local level, lack of awareness and transparency in related public and private sector, lack of expertise of integrated sustainable building design and construction among engineers, designers and constructors. It is also to be expected that more aggressive energy saving and environmental protection targets will be set by the 12th Five Year Plan. Promote green buildings will be one of the top priorities in China's swift urbanization process with focus on saving land, energy, water and materials. Chinese government has recognized the urgency of widely implementing sustainable buildings. Yet the Chinese green building revolution is still in its infancy. Under this framework, the following areas will offer business

  12. China. Top Sector Energy. Sustainable Building. Opportunities for Dutch companies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-08-15

    For China, sustainable design is necessary for controlling energy usage in crowded and constantly expanding urban areas. It is well known that China is the world's biggest construction market. Nearly half of the new buildings annually constructed worldwide are located in China by 2015. However, only about 4% of these are built according to energy efficiency standards. China's construction market will by 2020 account for 40% of the country's total energy consumption. While it contributes 15% of the world's GDP, China consumes 30% of the earth's steel and half its concrete. On top of which, buildings in China consume a third of the country's increasingly endangered water supplies. Recent research showed that almost half of the national energy consumption has been used for construction related purposes. Of existing buildings, a huge amount needs sustainable redesign and retrofitting technologies.Chinese government has recognized the urgency of widely implementing sustainable buildings. As a result, a national 3-star China National Green Building rating system has been launched in 2006. Yet the Chinese green building revolution is still in its infancy. Main problems are, amongst others, low level of regulations and standards, problematic implementations at local level, lack of awareness and transparency in related public and private sector, lack of expertise of integrated sustainable building design and construction among engineers, designers and constructors. It is also to be expected that more aggressive energy saving and environmental protection targets will be set by the 12th Five Year Plan. Promote green buildings will be one of the top priorities in China's swift urbanization process with focus on saving land, energy, water and materials. Chinese government has recognized the urgency of widely implementing sustainable buildings. Yet the Chinese green building revolution is still in its infancy. Under this framework, the

  13. Introduction to the Buildings Sector Module of SEDS

    Energy Technology Data Exchange (ETDEWEB)

    DeForest, Nicholas; Bonnet, Florence; Stadler, Michael; Marnay, Chris

    2010-12-31

    SEDS is a stochastic engineering-economics model that forecasts economy-wide energy consumption in the U.S. to 2050. It is the product of multi-laboratory collaboration among the National Renewable Energy Laboratory (NREL), Pacific Northwest National Laboratory (PNNL), Argonne National Laboratory (ANL), Lawrence Berkeley National Laboratory (LBNL), and Lumina Decision Systems. Among national energy models, SEDS is unique, as it is the only model written to explicitly incorporate uncertainty in its inputs and outputs. The primary purpose of SEDS is to estimate the impact of various US Department of Energy (DOE)R&D and policy programs on the performance and subsequent adoption rates of technologies relating to every energy consuming sector of the economy (shown below). It has previously been used to assist DOE in complying with the Government Performance and Results Act of 1993 (GPRA). The focus of LBNL research has been exclusively on develop the buildings model (SBEAM), which is capable of running as a stand-alone forecasting model, or as a part of SEDS as a whole. The full version of SEDS, containing all sectors and interaction is also called the 'integrated' version and is managed by NREL. Forecasts from SEDS are often compared to those coming from National Energy Modeling System (NEMS). The intention of this document is to present new users and developers with a general description of the purpose, functionality and structure of the buildings module within the Stochastic Energy Deployment System (SEDS). The Buildings module, which is capable of running as a standalone model, is also called the Stochastic Buildings Energy and Adoption Model (SBEAM). This document will focus exclusively on SBEAM and its interaction with other major sector modules present within SEDS. The methodologies and major assumptions employed in SBEAM will also be discussed. The organization of this report will parallel the organization of the model itself, being divided into major

  14. Modeling climate change impact in hospitality sector, using building resources consumption signature

    Science.gov (United States)

    Pinto, Armando; Bernardino, Mariana; Silva Santos, António; Pimpão Silva, Álvaro; Espírito Santo, Fátima

    2016-04-01

    Hotels are one of building types that consumes more energy and water per person and are vulnerable to climate change because in the occurrence of extreme events (heat waves, water stress) same failures could compromise the hotel services (comfort) and increase energy cost or compromise the landscape and amenities due to water use restrictions. Climate impact assessments and the development of adaptation strategies require the knowledge about critical climatic variables and also the behaviour of building. To study the risk and vulnerability of buildings and hotels to climate change regarding resources consumption (energy and water), previous studies used building energy modelling simulation (BEMS) tools to study the variation in energy and water consumption. In general, the climate change impact in building is evaluated studying the energy and water demand of the building for future climate scenarios. But, hotels are complex buildings, quite different from each other and assumption done in simplified BEMS aren't calibrated and usually neglect some important hotel features leading to projected estimates that do not usually match hotel sector understanding and practice. Taking account all uncertainties, the use of building signature (statistical method) could be helpful to assess, in a more clear way, the impact of Climate Change in the hospitality sector and using a broad sample. Statistical analysis of the global energy consumption obtained from bills shows that the energy consumption may be predicted within 90% confidence interval only with the outdoor temperature. In this article a simplified methodology is presented and applied to identify the climate change impact in hospitality sector using the building energy and water signature. This methodology is applied to sixteen hotels (nine in Lisbon and seven in Algarve) with four and five stars rating. The results show that is expect an increase in water and electricity consumption (manly due to the increase in

  15. Assessment of Alternative Scenarios for CO2 Reduction Potential in the Residential Building Sector

    Directory of Open Access Journals (Sweden)

    Young-Sun Jeong

    2017-03-01

    Full Text Available The South Korean government announced its goals of reducing the country’s CO2 emissions by up to 30% below the business as usual (BAU projections by 2020 in 2009 and 37% below BAU projections by 2030 in 2015. This paper explores the potential energy savings and reduction in CO2 emissions offered by residential building energy efficiency policies and plans in South Korea. The current and future energy consumption and CO2 emissions in the residential building were estimated using an energy–environment model from 2010 to 2030. The business as usual scenario is based on the energy consumption characteristic of residential buildings using the trends related to socio-economic prospects and the number of dwellings. The alternative scenarios took into account energy efficiency for new residential buildings (scenario I, refurbishment of existing residential buildings (scenario II, use of highly efficient boilers (scenario III, and use of a solar thermal energy system (scenario IV. The results show that energy consumption in the residential building sector will increase by 33% between 2007 and 2030 in the BAU scenario. Maximum reduction in CO2 emissions in the residential building sector of South Korea was observed by 2030 in scenario I. In each alternative scenario analysis, CO2 emissions were 12.9% lower than in the business as usual scenario by the year 2030.

  16. Performance-based building codes: a call for injury prevention indicators that bridge health and building sectors.

    Science.gov (United States)

    Edwards, N

    2008-10-01

    The international introduction of performance-based building codes calls for a re-examination of indicators used to monitor their implementation. Indicators used in the building sector have a business orientation, target the life cycle of buildings, and guide asset management. In contrast, indicators used in the health sector focus on injury prevention, have a behavioural orientation, lack specificity with respect to features of the built environment, and do not take into account patterns of building use or building longevity. Suggestions for metrics that bridge the building and health sectors are discussed. The need for integrated surveillance systems in health and building sectors is outlined. It is time to reconsider commonly used epidemiological indicators in the field of injury prevention and determine their utility to address the accountability requirements of performance-based codes.

  17. Energy savings potential from improved building controls for the US commercial building sector

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez, Nick; Katipamula, Srinivas; Wang, Weimin; Xie, Yulong; Zhao, Mingjie

    2017-09-27

    The U.S. Department of Energy’s (DOE’s) Building Technologies Office (BTO) sponsored a study to determine the potential national savings achievable in the commercial building sector through widespread deployment of best practice controls, elimination of system and component faults, and use of better sensing. Detailed characterization of potential savings was one source of input to set research, development, and deployment (RD&D) goals in the field of building sensors and controls. DOE’s building energy simulation software, EnergyPlus, was employed to estimate the potential savings from 34 measures in 9 building types and across 16 climates representing almost 57% of commercial building sector energy consumption. In addition to estimating savings from individual measures, three packages of measures were created to estimate savings from the packages. These packages represented an 1) efficient building, 2) typical building, and 3) inefficient building. To scale the results from individual measures or a package to the national scale, building weights by building type and climate locations from the Energy Information Administration’s 2012 Commercial Building Energy Consumption Survey (CBECS) were used. The results showed significant potential for energy savings across all building types and climates. The total site potential savings from individual measures by building type and climate location ranged between 0% and 25%. The total site potential savings by building type aggregated across all climates (using the CBECS building weights) for each measure varied between 0% and 16%. The total site potential savings aggregated across all building types and climates for each measure varied between 0% and 11%. Some individual measures had negative savings because correcting underlying operational problems (e.g., inadequate ventilation) resulted in increased energy consumption. When combined into packages, the overall national savings potential is estimated to be 29

  18. How to Measure Carbon Emission Reduction in China’s Public Building Sector: Retrospective Decomposition Analysis Based on STIRPAT Model in 2000–2015

    Directory of Open Access Journals (Sweden)

    Minda Ma

    2017-09-01

    Full Text Available Productive building energy efficiency (BEE work is an approved factor in the progress of sustainable urbanization in China, with the assessment of carbon emission reduction in China’s public buildings (CERCPB being an essential element of this endeavor. Nevertheless, such evaluation has been hampered by inadequate and inefficient approaches; this is the first study to utilize the Logarithmic Mean Divisia Index Type I (LMDI-I to decompose the equation of China’s public building carbon emissions (CPBCE with the connected driving factors (population in China, floor areas of China’s existing public buildings, building service level index of China’s existing public buildings, and the comparable CPBCE intensity, and this equation was established by the Stochastic Impacts by Regression on Population, Affluence, and Technology (STIRPAT model. The LMDI and STIRPAT approaches subsequently assessed the CERCPB values from 2001 to 2015. The results indicated that: (1 Only the contribution of the comparable CPBCE intensity to CPBCE was negative during 2001–2015; this represents the CERCPB value for the period. (2 The assessment results indicated that CERCPB has accumulated considerably with the swift progress of BEE work in China in 2001–2015. The CERCPB values in 2001–2005, 2006–2010, and 2011–2015 were 69.29, 158.53, and 277.86 million tons of carbon dioxide, respectively. (3 This study demonstrated that the positive effect of implementing public BEE work in China had led to significant results in 2001–2015, which can be regarded as a prerequisite for producing the considerable accumulation of CERCPB over this period. Overall, this study illustrated the feasibility of employing the LMDI and STIRPAT approaches for assessing the CERCPB value. Accordingly, we believe the results of this study are a significant driving force in the next phase of the development of the carbon emission control strategy of public buildings and sustainable

  19. Social History as Socio-Analysis. Building a Theoretical Viewpoint to Study the Relationship Between the Public Sphere, Women and the Popular Sectors

    Directory of Open Access Journals (Sweden)

    Diana Gómez Navas

    2015-04-01

    Full Text Available DOI: http://dx.doi.org/10.17227/01234870.41folios169.185 This article shows the construction of a theoretical viewpoint in the development of research that focuses on the relationship between three categories: the public sphere, women and popular sectors. To do this, it first presents an overview of the trends found in studies focused on similar relationships. Thereafter, a theoretical view is proposed based on the main routes and epistemological and methodological assumptions of social history enlightened by the tenets of socio-analytic proposal from French sociologist Pierre Bourdieu. Thus, the main epistemological implications of Bourdieu’s perspective in light of a theoretical reflection interested in the way in which a public urban world is set in the time is presented. The urban public world is questioned particularly based on the positions held by women in the working class.

  20. Mergers & Acquisitions in India: A sectoral analysis

    Directory of Open Access Journals (Sweden)

    Priya Bhalla

    2014-07-01

    Full Text Available Globalization, deregulation and technological improvements have resulted in increase in M&A across the globe. There is enormous literature existing in the advanced economies. However, very little information is available regarding M&A in India. Various sectors have witnessed differential involvement in M&A activity indicating higher participation by some. Particularly, certain sectors such as financial services and pharmaceuticals demonstrate higher M&A activity. To emphasise differential importance of sectors in M&A activity, it is necessary to conduct a sector-wise analysis. Accordingly, this study attempts to investigate the differential representation of various sectors in M&A. Further, it explores the role played by India in the rising global M&A activity. In light of this, it specifies the factors driving consolidation in the financial sector globally.

  1. Energy demand analysis in the industrial sector

    International Nuclear Information System (INIS)

    Lapillone, B.

    1991-01-01

    This Chapter of the publication is dealing with Energy Demand Analysis in the Industrial Sector.Different estimates of energy consumption in Industry taking Thailand as an example is given. Major energy consuming industrial sectors in selected Asian countries are given. Suggestion for the analysis of the energy consumption trends in industry, whether at the overall level or at the sub-sector level (e.g. food) using the conventional approach , through energy/output ratio is given. 4 refs, 7 figs, 13 tabs

  2. Free Switzerland from fossil energy sources - Clear proposals for the building, transportation and electrical power sectors

    International Nuclear Information System (INIS)

    Nordmann, R.

    2010-10-01

    A comprehensive review of the current situation of energy resources and consumption and of the prevailing framework like climate change is given, with a focus on Switzerland. The author, a member of the Lower House of the Swiss Parliament, presents facts and figures in a simple language, illustrated by tables and diagrams, in a well structured, easy-to-read book, with detailed indications of his data sources. Starting from the limited character of fossil energy sources, 'peak-oil' and the necessary reduction of greenhouse gas emissions, the author states that nuclear energy is not the solution. Action is absolutely needed, but which policy should be adopted? A global strategy is required that includes the stabilization of the world population as a key factor. An international agreement signed by as many states as possible should create stringent commitments. The developed countries have to demonstrate that prosperity and high life standard are compatible with an economy based on renewable energy sources. This will give to the most ambitious countries a significant advantage on new markets created by renewable energy use and energy efficiency. The author goes on by describing the current status of the technologies needed. What regards the particular case of Switzerland, this country is strongly dependent on energy import - mainly fossil - and CO 2 emissions arise mainly from the building and transportation sectors. A 50% efficiency improvement until 2030 is needed in fossil energy use. Electricity use has to become more efficient as well. Electricity generation - today about 60% renewable - shall move towards 100% renewable. The next chapters discuss clear realistic proposals on how to achieve these goals in the transportation sector ('Intelligent mobility'), the building sector ('Retrofitting the buildings to get them up-to-date') and the electrical power sector ('Entirely renewable electricity'). The title of the conclusion chapter: 'Focus again on the general

  3. Performance analysis of a soil-based thermal energy storage system using solar-driven air-source heat pump for Danish buildings sector

    DEFF Research Database (Denmark)

    Jradi, M.; Veje, C.; Jørgensen, B. N.

    2017-01-01

    and the economic and environmental aspects. However, the intermittent nature of solar energy and the lack of high solar radiation intensities in various climates favour the use of various energy storage techniques to eliminate the discrepancy between energy supply and demand. The current work presents an analysis......, Denmark, in addition to charging the soil storage medium in summer months when excess electric power is generated. The stored heat is discharged in December and January to provide the space heating and domestic hot water demands of the residential project without the utilization of an external heating...... losses and the surrounding soil temperature variation throughout the year. It was found that the overall system heating coefficient of performance is around 4.76, where the reported energetic efficiency is 5.88% for the standalone PV system, 19.1% for the combined PV-ASHP system, and 22...

  4. Kyiv institutional buildings sector energy efficiency program: Technical assessment

    Energy Technology Data Exchange (ETDEWEB)

    Secrest, T.J.; Freeman, S.L. [Pacific Northwest National Lab., Richland, WA (United States); Popelka, A. [Tysak Engineering, Acton, MA (United States); Shestopal, P.A.; Gagurin, E.V. [Agency for Rational Energy Use and Ecology, Kyiv (Ukraine)

    1997-08-01

    The purpose of this assessment is to characterize the economic energy efficiency potential and investment requirements for space heating and hot water provided by district heat in the stock of state and municipal institutional buildings in the city of Kyiv. The assessment involves three activities. The first is a survey of state and municipal institutions to characterize the stock of institutional buildings. The second is to develop an estimate of the cost-effective efficiency potential. The third is to estimate the investment requirements to acquire the efficiency resource. Institutional buildings are defined as nonresidential buildings owned and occupied by state and municipal organizations. General categories of institutional buildings are education, healthcare, and cultural. The characterization activity provides information about the number of buildings, building floorspace, and consumption of space heating and hot water energy provided by the district system.

  5. Analysis of the Russian Market for Building Energy Efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Lychuk, Taras; Evans, Meredydd; Halverson, Mark A.; Roshchanka, Volha

    2012-12-01

    This report provides analysis of the Russian energy efficiency market for the building sector from the perspective of U.S. businesses interested in exporting relevant technologies, products and experience to Russia. We aim to help U.S. energy efficiency and environmental technologies businesses to better understand the Russian building market to plan their market strategy.

  6. Performance measurement in transport sector analysis

    Directory of Open Access Journals (Sweden)

    M. Išoraitė

    2004-06-01

    Full Text Available The article analyses the following issues: 1. Performance measurement in literature. The performance measurement has an important role to play in the efficient and effective management of organizations. Kaplan and Johnson highlighted the failure of the financial measures to reflect changes in the competitive circumstances and strategies of modern organizations. Many authors have focused attention on how organizations can design more appropriate measurement systems. Based on literature, consultancy experience and action research, numerous processes have been developed that organizations can follow in order to design and implement systems. Many frameworks have been proposed that support these processes. The objective of such frameworks is to help organizations define a set of measures that reflect their objectives and assess their performance appropriately. 2. Transport sector performance and its impacts measuring. The purpose of transport measurement is to identify opportunities enhancing transport performance. Successful transport sector management requires a system to analyze its efficiency and effectiveness as well as plan interventions if transport sector performance needs improvement. Transport impacts must be measurable and monitorable so that the person responsible for the project intervention can decide when and how to influence them. Performance indicators provide a means to measure and monitor impacts. These indicators essentially reflect quantitative and qualitative aspects of impacts at given time and places. 3. Transport sector output and input. Transport sector inputs are the resources required to deliver transport sector outputs. Transport sector inputs are typically: human resources, particularly skilled resources (including specialists consulting inputs; technology processes such as equipment and work; and finance, both public and private. 4. Transport sector policy and institutional framework; 5. Cause – effect linkages; 6

  7. Building Energy Monitoring and Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Tianzhen; Feng, Wei; Lu, Alison; Xia, Jianjun; Yang, Le; Shen, Qi; Im, Piljae; Bhandari, Mahabir

    2013-06-01

    This project aimed to develop a standard methodology for building energy data definition, collection, presentation, and analysis; apply the developed methods to a standardized energy monitoring platform, including hardware and software, to collect and analyze building energy use data; and compile offline statistical data and online real-time data in both countries for fully understanding the current status of building energy use. This helps decode the driving forces behind the discrepancy of building energy use between the two countries; identify gaps and deficiencies of current building energy monitoring, data collection, and analysis; and create knowledge and tools to collect and analyze good building energy data to provide valuable and actionable information for key stakeholders.

  8. Building a Sustainable Higher Education Sector in the UAE

    Science.gov (United States)

    Jose, Saju; Chacko, Jacob

    2017-01-01

    Purpose: The purpose of this paper is to examine the relevant economic aspects that could affect the sustainability of the HE sector in the UAE. Design/methodology/approach: Data are collected mainly through secondary sources and based on the relevant information. Two constructs, namely, market factors and educational governance are identified…

  9. Green Buildings in Singapore : Analyzing a Frontrunner’s Sectoral Innovation System

    NARCIS (Netherlands)

    Siva, Vidushini; Hoppe, Thomas; Jain, Mansi

    2017-01-01

    The building sector in Singapore consumes up to half of the nation’s total energy. The government has therefore been urging the transformation of the industry by targeting 80% of all buildings to be green-certified by 2030. Thus far, Singapore has done relatively well, and is widely viewed as

  10. Major models and data sources for residential and commercial sector energy conservation analysis. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1980-09-01

    Major models and data sources are reviewed that can be used for energy-conservation analysis in the residential and commercial sectors to provide an introduction to the information that can or is available to DOE in order to further its efforts in analyzing and quantifying their policy and program requirements. Models and data sources examined in the residential sector are: ORNL Residential Energy Model; BECOM; NEPOOL; MATH/CHRDS; NIECS; Energy Consumption Data Base: Household Sector; Patterns of Energy Use by Electrical Appliances Data Base; Annual Housing Survey; 1970 Census of Housing; AIA Research Corporation Data Base; RECS; Solar Market Development Model; and ORNL Buildings Energy Use Data Book. Models and data sources examined in the commercial sector are: ORNL Commercial Sector Model of Energy Demand; BECOM; NEPOOL; Energy Consumption Data Base: Commercial Sector; F.W. Dodge Data Base; NFIB Energy Report for Small Businesses; ADL Commercial Sector Energy Use Data Base; AIA Research Corporation Data Base; Nonresidential Buildings Surveys of Energy Consumption; General Electric Co: Commercial Sector Data Base; The BOMA Commercial Sector Data Base; The Tishman-Syska and Hennessy Data Base; The NEMA Commercial Sector Data Base; ORNL Buildings Energy Use Data Book; and Solar Market Development Model. Purpose; basis for model structure; policy variables and parameters; level of regional, sectoral, and fuels detail; outputs; input requirements; sources of data; computer accessibility and requirements; and a bibliography are provided for each model and data source.

  11. Assessment of the Technical Potential for Achieving Net Zero-Energy Buildings in the Commercial Sector

    Energy Technology Data Exchange (ETDEWEB)

    Griffith, B.; Long, N.; Torcellini, P.; Judkoff, R.; Crawley, D.; Ryan, J.

    2007-12-01

    This report summarizes the findings from research conducted at NREL to assess the technical potential for zero-energy building technologies and practices to reduce the impact of commercial buildings on the U.S. energy system. Commercial buildings currently account for 18% of annual U.S. energy consumption, and energy use is growing along with overall floor area. Reducing the energy use of this sector will require aggressive research goals and rapid implementation of the research results.

  12. Primary energy use for heating in the Swedish building sector-Current trends and proposed target

    International Nuclear Information System (INIS)

    Johansson, P.; Nylander, A.; Johnsson, F.

    2007-01-01

    One goal of the Swedish energy policy is to reduce the amount of electricity used for heating in the building sector. This means to reduce the primary energy used for heating which in this paper is analyzed in the context of various heating technologies and CO 2 emissions. The analysis is applied to a region in Sweden (southern Sweden) for which detailed information on the energy infrastructure (the capital stock of the buildings and heating systems together with geographical variations in heat intensity) is available from a previous work [Johansson, P., Nylander, A., Johnsson, F., 2005. Electricity dependency and CO 2 emissions from heating in the Swedish building sector-current trends in conflict with governmental policy? Energy policy] and which is large enough to be assumed representative for Sweden as a whole. The detailed mapping of the energy infrastructure allows a good estimate on the rate at which the energy system can be expected to be replaced with respect to economical lifetime of the capital stock (the year 2025 in this case). Two scenarios are investigated; a target scenario for which energy savings are employed (e.g. improving climate shell in buildings) and oil and most of the electricity used for heating purposes are phased out and a second for which the current trend in the heating market continues. In the target scenario it is shown that although only applying commercially competitive heating technologies, it is possible to achieve a 47% reduction in primary energy use for heating with a 34% decrease in heat demand together with significant reduction in CO 2 emissions. However, the scenario which continues the current trends on the heating market instead yields an increase (of about 10%) in primary energy use (reduction in conversion efficiency) of the heating system of the region over the period studied, in spite of a slight decrease in heat demand (9%, mainly due to energy efficiency measures) as well as in CO 2 emissions. In light of the

  13. The trigger matters: The decision-making process for heating systems in the residential building sector

    International Nuclear Information System (INIS)

    Hecher, Maria; Hatzl, Stefanie; Knoeri, Christof; Posch, Alfred

    2017-01-01

    As heat demand of buildings accounts for a significant amount of final energy use and related carbon emissions, it’s important to gain insights into the homeowners’ decision-making processes and to identify factors determining the choice of heating systems. In this study, data was collected in an online survey carried out in 2015, from private homeowners of existing and newly built single and double-family houses in Austria who had invested in a new heating system within the last ten years (N=484). In contrast to previous studies, this study specifically investigates the triggers behind homeowner decisions to invest in a new heating system (e.g. problem, opportunity, or new building situation). Results of binary logistic regression analysis show that subsidies for heating system tabinvestments and infrastructural adjustments reveal to be most effective for homeowners in problem situations to foster alternative heating systems. For homeowners in opportunity situations (e.g. building refurbishment), in addition operational convenience appears to be important. For new buildings, the main barriers for alternative heating system adoption were found in the positive perception of fuel supply security and feasibility of fossil systems. Thus, the use of trigger-specific policy measures is proposed to foster alternative heating systems in the residential building sector. - Highlights: • Homeowners’ triggers determine heating system adoption decisions. • It is crucial to reach homeowners early enough to avoid problem situations. • For problem-triggered homeowners, subsidies are most effective. • Opportunity-triggered homeowners prefer alternative heating systems. • Opportunity-triggered homeowners need solid decision basis for technology comparison.

  14. Energy consumptions in existing buildings; Les consommations d'energie des batiments existants

    Energy Technology Data Exchange (ETDEWEB)

    Nuss, St. [Ecole Nationale Superieure des Arts et Industries de Strasbourg, 78 - Saint-Remy-Les-Chevreuse (France)]|[Costic, 78 - Sainte Remy les Chevreuses (France)

    2002-05-01

    This document presents a sectoral analysis of the energy consumptions in existing French buildings: 1) - residential sector: social buildings, private dwellings; 2) - tertiary sector: office buildings, hotels, commercial buildings, school buildings, hospitals; 3) - industry; 4) - general status. (J.S.)

  15. Stagnating energy efficiency in the Swedish building sector-Economic and organisational explanations

    International Nuclear Information System (INIS)

    Naessen, Jonas; Sprei, Frances; Holmberg, John

    2008-01-01

    The development towards higher energy efficiency in the Swedish building sector stagnated in the late 1980s and 1990s. In new buildings the average specific energy use for heating is twice as high as in the best performing buildings 20 years ago. By combining econometric studies and interviews with actors in the building sector we analyse the underlying economic and organisational causes for this development. In the stock of buildings, specific energy use for heating (kWh/m 2 /yr) has a high correlation with increasing energy prices and price elasticities have not changed markedly over time. This implies that the stagnation to a large extent can be explained by energy price trends. On the contrary, in new buildings the correlation between energy prices and specific energy use is much weaker. One important cause of low sensitivity to price changes is that information about the life cycle cost (LCC) of different investment alternatives is often not available to the involved actors. The most common investment criterion is instead the requirements of the national building energy standard which has developed into a norm rather than a minimum for energy performance. In this paper we also discuss potential improvements in the learning processes within the sector

  16. Introduction of flexible monitoring equipment into the Greenlandic building sector

    DEFF Research Database (Denmark)

    Kotol, Martin; Heller, Alfred; Orthmann, Christian

    2014-01-01

    sensor network (WSN) technologies. The design of a prototype wireless monitoring and control system is demonstrated in the new dormitory Apisseq in Sisimiut, Greenland. The existing mechanical ventilation was running at a constant air volume even during unoccupied hours which resulted in a very high heat...... to be hardwired to the controller. In Greenland where price of the labor is very high and availability of experts limited the installation of such control system becomes unacceptably expensive, particularly in case of renovation of existing buildings. One possible solution to the above is to introduce wireless...... demand. It was estimated that installing the WSN system will bring annual savings of 1,600 € at the investment of 8,000 €. This paper describes the initial setup of the system and discusses its advantages and drawbacks....

  17. Building the Synergy between Public Sector and Research Data Infrastructures

    Science.gov (United States)

    Craglia, Massimo; Friis-Christensen, Anders; Ostländer, Nicole; Perego, Andrea

    2014-05-01

    INSPIRE is a European Directive aiming to establish a EU-wide spatial data infrastructure to give cross-border access to information that can be used to support EU environmental policies, as well as other policies and activities having an impact on the environment. In order to ensure cross-border interoperability of data infrastructures operated by EU Member States, INSPIRE sets out a framework based on common specifications for metadata, data, network services, data and service sharing, monitoring and reporting. The implementation of INSPIRE has reached important milestones: the INSPIRE Geoportal was launched in 2011 providing a single access point for the discovery of INSPIRE data and services across EU Member States (currently, about 300K), while all the technical specifications for the interoperability of data across the 34 INSPIRE themes were adopted at the end of 2013. During this period a number of EU and international initiatives has been launched, concerning cross-domain interoperability and (Linked) Open Data. In particular, the EU Open Data Portal, launched in December 2012, made provisions to access government and scientific data from EU institutions and bodies, and the EU ISA Programme (Interoperability Solutions for European Public Administrations) promotes cross-sector interoperability by sharing and re-using EU-wide and national standards and components. Moreover, the Research Data Alliance (RDA), an initiative jointly funded by the European Commission, the US National Science Foundation and the Australian Research Council, was launched in March 2013 to promote scientific data sharing and interoperability. The Joint Research Centre of the European Commission (JRC), besides being the technical coordinator of the implementation of INSPIRE, is also actively involved in the initiatives promoting cross-sector re-use in INSPIRE, and sustainable approaches to address the evolution of technologies - in particular, how to support Linked Data in INSPIRE and

  18. Research on statistical methodology to investigate energy consumption in public buildings sector in China

    International Nuclear Information System (INIS)

    Chen Shuqin; Li Nianping; Guan Jun

    2008-01-01

    The purpose of this research is to find a statistical methodology to investigate the national energy consumption in the public buildings sector in China, in order to look into the actuality of the national energy consumption of public buildings and to provide abundant data for building energy efficiency work. The frame of a national statistical system of energy consumption for public buildings is presented in this paper. The statistical index system of energy consumption is constituted, which refers to the general characteristics of public buildings, their possession and utilization of energy consumption equipment and their energy consumption quantities. Sequentially, a set of statistical report forms is designed to investigate the energy consumption of cities, provinces and the country, respectively. On this base, the above statistical methodology is used to gather statistics of a public building for annual energy consumption

  19. Energy efficiency outlook in China’s urban buildings sector through 2030

    International Nuclear Information System (INIS)

    McNeil, Michael A.; Feng, Wei; Rue du Can, Stephane de la; Khanna, Nina Zheng; Ke, Jing; Zhou, Nan

    2016-01-01

    This study uses bottom-up modeling framework in order to quantify potential energy savings and emission reduction impacts from the implementation of energy efficiency programs in the building sector in China. Policies considered include (1) accelerated building codes in residential and commercial buildings, (2) increased penetration of district heat metering and controls, (3) district heating efficiency improvement, (4) building energy efficiency labeling programs and (5) retrofits of existing commercial buildings. Among these programs, we found that the implementation of building codes provide by far the largest savings opportunity, leading to an overall 17% reduction in overall space heating and cooling demand relative to the baseline. Second are energy efficiency labels with 6%, followed by reductions of losses associated with district heating representing 4% reduction and finally, retrofits representing only about a 1% savings. - Highlights: • We use a bottom-up modeling approach to quantify emission reduction from efficiency programs. • Heating and cooling are the main focus of this study. • We find that building codes lead to 17% reduction compare to the baseline. • Other programs analyzed concern district heat, building labeling and retrofits of buildings.

  20. Energy efficiency in the Hellenic building sector: An assessment of the restrictions and perspectives of the market

    International Nuclear Information System (INIS)

    Karkanias, C.; Boemi, S.N.; Papadopoulos, A.M.; Tsoutsos, T.D.; Karagiannidis, A.

    2010-01-01

    The significance of bioclimatic architecture has become widely accepted since the 1970s and the implementation of its principles in practice is a key factor in order to achieve energy efficiency in the building sector. The way, however, from scientific acceptance to commercial utilization is not a straightforward one. This paper deals with the notion of bioclimatic architecture in buildings and investigates the aspects of this concept in Hellas. A sample of university researchers, building contractors and members of public organisations was interviewed using a standardised set of guidelines. The barriers to promoting bioclimatic design, role of the local government in the adoption process, level of environmental culture as well as perspectives of this concept in Hellas were the key areas of discussion in each of the interviews. The results from the data analysis reveal insufficient economic incentives, a lack in technical information as well as a lack in specific environmental policies that would foster the propagation of bioclimatic architecture.

  1. Building Technological Capabilities in Ghanaian SMEs through Private Sector Development Programmes

    DEFF Research Database (Denmark)

    Kragelund, Jens Peter

    2005-01-01

    Since the beginning of the 1990s an increasing number of donors have initiated pro-grammes to support the private sector in developing countries in order to enhance eco-nomic growth and thereby alleviate poverty. This paper uses case studies of a wide spec-trum of private enterprises in Ghana...... and related business entities to illustrate how the private sector programme of Danida has worked in Ghana. It looks into the direct effects of the programme, i.e. capability building and simultaneously shows how conventional evaluation procedures miss many of the derived effects of the programme....

  2. Project-Based Market Competition and Policy Implications for Sustainable Developments in Building and Construction Sectors

    Directory of Open Access Journals (Sweden)

    Min-Ren Yan

    2015-11-01

    Full Text Available Building and construction sectors are significant contributors to the global economy, but their energy consumption necessitates greater commitment to sustainable developments. There is therefore a growing demand for green innovation in the form of cleaner production and policies to meet the modern requirements of sustainability. However, the nature in which public work is undertaken is in an environment of project-based market competition, whereby contractors routinely bid for contracts under specific project awarding systems, and variations are accompanied with the unique scope of individual projects before the final goods or services are delivered. A comprehensive understanding of the characteristics and contractors’ behavior in systems could help to identify the leverage points of policies. This paper proposes a system dynamics model, with quantitative analysis and simulations, to demonstrate the problems of a system with different project awarding systems and ineffective market performance. The framework of market efficiency and performance measures has been proposed to evaluate the project-based competition mechanism. Managerial policy implications for market efficiency and sustainable developments can thus be systematically discussed and compared through iterative computer simulations and scenario analysis.

  3. TRANSPORTATION BOT SCHEMES FOR PUBLIC AND PRIVATE SECTOR FINANCING SCENARIO ANALYSIS

    OpenAIRE

    WEI, Chien-Hung; CHUNG, Ming-Chih

    2002-01-01

    Transportation Build-Operate-Transfer financing projects have larger payment risks and failure possibilities than other financing projects, and these factors are essential to financing scenarios. The changes of financing scenarios not only affect private sectors' financing process but the conflict between private sectors and banks. This study broadly reviews relevant factors affecting BOT financing strategies, interviews relevant experts and then uses scenario analysis to design a questionnai...

  4. Solar Heating and Cooling of Buildings: Activities of the Private Sector of the Building Community and Its Perceived Needs Relative to Increased Activity.

    Science.gov (United States)

    National Academy of Sciences - National Research Council, Washington, DC. Committee on Solar Energy in the Heating and Cooling of Buildings.

    This report is essentially a collection of information gathered from a broad cross-section of the building community that provides a description of the state of affairs existing mid-1974 through mid-1975 in the private sector of the building community with regard to solar heating and cooling of buildings. The report additionally contains…

  5. The potential for energy efficiency gains in the Canadian commercial building sector: A stochastic frontier study

    International Nuclear Information System (INIS)

    Buck, J.; Young, D.

    2007-01-01

    The achievement of energy efficiency in commercial buildings is a function of the activities undertaken, the technology in place, and the extent to which those technologies are used efficiently. We study the factors that affect efficient energy use in the Canadian commercial sector by applying a stochastic frontier approach to a cross-section of Canadian commercial buildings included in the Commercial and Institutional Building Energy Use Survey (CIBEUS). Structural and climate-control features of the buildings as well as climatic conditions are assumed to determine the location of the frontier, while management-related variables including such factors as ownership type and activities govern whether or not the maximally attainable efficiency along the frontier is achieved. Our results indicate that although, on average, buildings appear to be fairly efficient, certain types of operations are more likely than others to exhibit energy efficiencies that are significantly worse than average. These results, along with those related to the effects of physical characteristics on the stochastic efficiency frontier, suggest that there is scope for focused policy initiatives to increase energy efficiency in this sector

  6. Analysing policy interactions for promoting energy efficiency in the Hellenic sectors of buildings and transport

    OpenAIRE

    Dr. Popi KONIDARI; Mrs. Anna FLESSA; Ms. Aliki-Nefeli MAVRAKI; Ms. Eleni-Danai MAVRAKI

    2016-01-01

    Policy interactions are important parameters for the successful implementation of policies, measures and policy instruments. The parallel implementation of a number of policy instruments has the potential to create synergies or conflicts that maximize or prevent the achievement of their anticipated outcomes. This paper analyses three cases of policy interactions between two policy instruments for promoting even more the energy efficiency outcomes in Greece for two sectors, buildings and trans...

  7. An energy efficiency plan for the Iranian building sub-sector

    International Nuclear Information System (INIS)

    Sadegh Zadeh, S.M.

    2007-01-01

    The objective of this paper is to develop a 25-year least cost plan for energy management in the Iranian building sub-sector. For this purpose, an energy flow optimization from the point where the final energy is delivered to consumers, until the useful energy and energy services point is investigated. This will help to select the most economically feasible technologies as well as energy carriers considering all technical and social constraints. Based on the optimization results, absorption cooling for the regions where natural gas network is available, grades A and B evaporative coolers and air conditioners for those areas where there is no gas service, gas fired heating systems, wall insulation, double-glazed windows, equipments and appliances with highest energy labelling grade and compact and non-compact fluorescent lamps are among the selections. The results of the sensitivity analysis indicates that if the cost of natural gas network development to the regions where there is no gas will result in the tripling rate of the actual cost of the natural gas, in those areas, the priority should be still given to the consumption of gas. The proposed energy efficiency plan results in 27%, 54% and 10% saving in energy consumption, energy cost and investment cost, respectively

  8. Energy consumption in buildings within the services sector. 2008; Energibruk i bygninger for tjenesteytende virksomhet. 2008

    Energy Technology Data Exchange (ETDEWEB)

    Abrahamsen, Anne Sofie; Bergh, Marius

    2011-05-15

    The population and sample for this survey are based on data from The Ground Parcel, Address and Building Register (GAB) as of 1 January 2008. GAB is a computer register containing information about ground properties and addresses in Norway. Defined by type of building, around 130 000 buildings within the services sector are included in the register. Buildings with an unspecified owner, buildings smaller than 200 m2 and some special types of buildings (garages etc.) were excluded from the population, thus giving a total of just over 60 000 buildings. The gross sample was made up of 8 100 buildings, and questionnaires were sent to the landowners of these buildings. In addition to the Statistics Norway sample, data from Enova and Statsbygg, among others, was used. The net sample included about 5 000 buildings. The relatively low number of usable questionnaires in the Statistics Norway sample was related to both the quality of the data in GAB and in the reported data. The use of energy per square metre between the different types of buildings in the survey varies considerably. This is due to several factors, such as time of use of the buildings, the amount of technical equipment in the buildings, energy efficiency etc. The average for all the buildings in the survey for 2008 was 226 kWh/m2. Total energy consumption in the survey was slightly more than 5 TWh distributed over 22.5 million m2 of heated area. Electric power accounted for 83 per cent of the energy used and was by far the largest energy carrier. District heating was the second largest energy carrier with 11 per cent, while heating oil accounted for about 3 per cent. Wood and pellets made up slightly less than 2 per cent and other energy carriers totalled 0.4 per cent. Schools and kindergartens had by far the lowest use of energy, with an average of 159 kWh/m2. This is related to the relatively low time of use of the buildings and fewer technical installations using energy. On the other hand, hospitals are

  9. On the formation of energy policies towards 2020: Challenges in the Swedish industrial and building sectors

    International Nuclear Information System (INIS)

    Thollander, Patrik; Rohdin, Patrik; Moshfegh, Bahram

    2012-01-01

    The impact of global climate change due to increased emissions of greenhouse gases emissions which in turn is a consequence of in particular, the use of fossil fuels, has made EU decision makers to act decisively, e.g. the EU 2020 primary energy target of reducing primary energy use with 20% from 2005 to 2020. The aim of this paper is to present major challenges related to the development and formation of energy policies towards the Swedish industrial and building sector in order to fulfill the EU 2020 primary energy target. This paper is approaching the presented challenges by introducing the theory of Asymmetric Energy Policy Shocks (AEPSs), and addresses some key challenges which are of particular relevance for the fulfilment of the EU 2020 primary energy target for Member States like Sweden which from an energy end-use perspective substantially differs from the EU-25's energy end-use structure. In conclusion, overcoming AEPSs, and moving towards a more Long-Term Energy Policy Approach (LTEPA) will be of key importance for individual Member States, if the 2020 primary energy target is to be fulfilled. - Highlights: ► The paper presents major challenges in regard to the formation of Swedish energy policy for the industry and building sectors. ► The theory of Asymmetric Energy Policy Shocks is introduced. ► Regional differences are important to take into account when designing energy policies for the industry and building sectors.

  10. Commercial sector gas cooling technology frontier and market share analysis

    International Nuclear Information System (INIS)

    Pine, G.D.; Mac Donald, J.M.; McLain, H.A.

    1990-01-01

    This paper describes a method, developed for the Gas Research Institute of the United States, that can assist planning for commercial sector natural gas cooling systems R and D. These systems are higher in first cost than conventional electric chillers. Yet, engine-driven chiller designs exist which are currently competitive in U.S. markets typified by high electricity or demand charges. Section II describes a scenario analysis approach used to develop and test the method. Section III defines the technology frontier, a conceptual tool for identifying new designs with sales potential. Section IV describes a discrete choice method for predicting market shares of technologies with sales potential. Section V shows how the method predicts operating parameter, cost, and/or performance goals for technologies without current sales potential (or for enhancing a frontier technology's sales potential). Section VI concludes with an illustrative example for the Chicago office building retrofit market

  11. Analysis of Intra-Industry Trade in Turkish Automotive Sector

    Directory of Open Access Journals (Sweden)

    Füsun YENİLMEZ

    2018-01-01

    Full Text Available The automotive sector is one of the important sectors affecting the economy of a country. Considering the export and import size of the sector, any kind of work to be done for the sector is important. The analysis of Turkey's situation in the sector will contribute to R&D studies to develop the sector, strategic planning and determination of short, medium and long term targets. The aim of the paper is to determine the location of the Turkish automotive industry in world trade. For this purpose, firstly products in the automotive sector foreign trade were reduced to three sub-digit and included in the evaluation. Grubel-Lloyd index is used in the analysis. As a result of the analyzes, Turkey has been determined separately according to the product groups of the countries that have the most intensive trade in industry.

  12. A Specific Model for Assessing the Financial Performance:Case study on Building Sector Enterprises of Galati County - Romania

    Directory of Open Access Journals (Sweden)

    Nicoleta BARBUTA-MISU

    2011-11-01

    Full Text Available In this paper is designed a specific model for assessing the financial performance, based on models of bankruptcy risk, for enterprises acting in the building sector from Galati County - Romania. The main purpose of the paper is designing and development a model for evaluation financial performance that important for ranking enterprises. To choose model variables was used discriminate analysis on 22 variables proposed that separate objectively performant by non-performant enterprises. The proposed model with five variables was tested using the initial sample of enterprises obtaining an average success ratio of 81.82%.

  13. Ergonomics and design in the Brazilian agricultural sector: a proposal to build matrix of contradictions.

    Science.gov (United States)

    Tosetto, Thaís; Camarotto, João Alberto

    2012-01-01

    The paper presents a correlation between the parameters of classical TRIZ and variables of analysis of the EWA to construct a matrix of contradictions in ergonomics, with the objective of assisting the designing processes in the Brazilian agricultural sector. Given the representativeness of the sector in the economy, the boundary conditions in which the activities are developed and their impact on the health of workers, this proposal should contribute to the development of adaptable solutions and the promotion of Decent Work.

  14. Analysis of exports of the brazilian mineral sector

    Directory of Open Access Journals (Sweden)

    Alison Geovani Schwingel Franck

    2017-01-01

    Full Text Available This study sought to analyze the pattern of specialization of exports of brazilian mineral sector, identifying the most dynamic productive sectors in the period between 1999 and 2015. For this purpose, the Import Coverage Ratio was calculated, as well as the Intra-industry Trade rate (IIT, and the Sector Concentration of Exports. Data were collected from the Foreign Trade Information Analysis System (Alice Web. The results indicated that Brazil has a few competitive mineral groups in its export basket, and that it is concentrated in a few sectors. It was found that the most competitive sectors were Niobium ore, iron, manganese, gold, aluminum, other semimanufaturado and copper.

  15. Climate change and the UK house building sector: perceptions, impacts and adaptive capacity

    International Nuclear Information System (INIS)

    Hertin, J.; Berkhout, F.; Gann, D.; Barlow, J.

    2003-01-01

    This paper explores how climate change could affect the UK house-building sector, focusing on the question of how companies can adapt to changing climatic conditions. It presents the results of in-depth interviews in five house-building companies in the UK. We start from the assumption that climate change is only one driver among many, including technological innovation, shifting consumer expectations and changing regulation, that the industry faces. This approach draws on insights that are well established in the management and innovation literatures, but have often been neglected in studies of climate change. We report research about the perceptions of house builders about future impacts of climate change, potential adaptation measures that may be open to them and their ability to carry out these measures. The paper draws conclusions about the challenges that climate change presents to the UK house building industry. (author)

  16. Kyiv institutional buildings sector energy efficiency program: Lending and implementation assessment

    Energy Technology Data Exchange (ETDEWEB)

    Secrest, T.J.; Freeman, S.L. [Pacific Northwest National Lab., Richland, WA (United States); Popelka, A. [Tysak Engineering, Acton, MA (United States); Shestopal, P.A.; Gagurin, E.V. [Agency for Rational Energy Use and Ecology, Kyiv (Ukraine)

    1997-08-01

    The government of Ukraine, through the State Committee of Energy Conservation (State Committee), is considering the implementation of energy efficiency measures in state and municipal institutional buildings in the city of Kyiv. The State Committee entered into a Memorandum of Cooperation with the US Department of Energy (DOE) to conduct an assessment of the institutional buildings sector efficiency potential. This assessment will be used to support a potential loan by the World Bank for implementing a buildings efficiency improvement program in Kyiv. This report provides an assessment of the options for structuring the lending scenarios and the implementation of the program. Components to the lending structure are options for the disbursement of funds, options for the loan service, and other financial options and considerations. Program implementation includes management structures, reporting, installation activities, and post-installation activities such as training and verification.

  17. Energy policy instruments and technical change in the residential building sector

    International Nuclear Information System (INIS)

    Beerepoot, W.M.C.

    2007-01-01

    The passing by the European Parliament of the Energy Performance of Buildings Directive (EPBD) in 2003 obliges all European member states to implement energy regulations for buildings based on the concept of energy performance by the year 2009 ultimately. Given the importance of the development of innovations in energy technology, and a transition to a sustainable energy supply system, it is necessary that policy instruments for energy conservation in the building sector stimulate the development and diffusion of innovations. This thesis contributes to knowledge about the content of energy performance policy and concludes that the effect of Dutch energy performance policy in encouraging innovation is limited. Energy efficiency improvements, by energy performance policy, seem to have come from the overall optimisation of all the energy related features of residential buildings. Insulation levels improved, although not spectacular. Efficiencies of heating technology improved, although this seems partly to be a result of the ongoing development that started in the 1980s. The efficiency of fans used for ventilation improved, as did the efficiency of all sorts of auxiliary devices needed in heating technology, as well as the efficiency of heat recovery in balanced ventilation systems. Although energy performance policy seems to have contributed to the optimisation of all energy related features of residential buildings, it did not cause a breakthrough of innovative technology such as solar thermal systems or heat pumps. The study of the innovation system of the Dutch construction industry identifies how the project-based nature of the construction industry is an obstacle to 'learning-rich' collaboration between the various stakeholders. The study contributes to the discussion about the impact of government policy for energy conservation in the building sector, in the context of climate change policy.

  18. Towards a low-carbon future in China's building sector-A review of energy and climate models forecast

    International Nuclear Information System (INIS)

    Li Jun

    2008-01-01

    This article investigates the potentials of energy saving and greenhouse gases emission mitigation offered by implementation of building energy efficiency policies in China. An overview of existing literature regarding long-term energy-demand and carbon dioxide (CO 2 ) emission forecast scenarios is presented. Energy consumption in buildings could be reduced by 100-300 million tons of oil equivalent (mtoe) in 2030 compared with the business-as-usual (BAU) scenario, which means that 600-700 million metric tons of CO 2 emissions could be saved by implementing appropriate energy policies within an adapted institutional framework. The main energy-saving potentials in buildings can be achieved by improving a building's thermal performance and district heating system efficiency. The analyses also reveal that the energy interchange systems are effective especially in the early stage of penetration. Our analysis on the reviewed models suggests that more ambitious efficiency improvement policies in both supply- and demand-side as well as the carbon price should be taken into account in the policy scenarios to address drastic reduction of CO 2 emission in the building sector to ensure climate security over the next decades

  19. Comparative Analysis of Sectoral Innovation System and Diamond Model: The Case of Telecom Sector of Iran

    Directory of Open Access Journals (Sweden)

    Mohammad Hosein Rezazadeh Mehrizi

    2008-08-01

    Full Text Available Porter’s model of Competitive advantage of nations (named as Diamond Model has been widely used and criticized as well, over recent two decades. On the other hand, non-mainstream economists have tried to propose new frameworks for industrial analysis, that among them, Sectoral Innovation System (SIS is one of the most influential ones. After proposing an assessment framework, we use this framework to compare SIS and Porter’s models and apply them to the case of second mobile operator in Iran. Briefly, SIS model sheds light on the innovation process and competence building and focuses on system failures that are of special importance in the context of developing countries, while Diamond model has the advantage of brining the production process and the influential role of government into focus, but each one has its own shortcomings for analyzing industrial development in developing countries and both of them fail to pay enough attention to foreign relations and international linkages.

  20. Analysis of the Chinese Market for Building Energy Efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Sha [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Evans, Meredydd [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Shi, Qing [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2014-03-20

    China will account for about half of the new construction globally in the coming decade. Its floorspace doubled from 1996 to 2011, and Chinese rural buildings alone have as much floorspace as all of U.S. residential buildings. Building energy consumption has also grown, increasing by over 40% since 1990. To curb building energy demand, the Chinese government has launched a series of policies and programs. Combined, this growth in buildings and renovations, along with the policies to promote green buildings, are creating a large market for energy efficiency products and services. This report assesses the impact of China’s policies on building energy efficiency and on the market for energy efficiency in the future. The first chapter of this report introduces the trends in China, drawing on both historical analysis, and detailed modeling of the drivers behind changes in floorspace and building energy demand such as economic and population growth, urbanization, policy. The analysis describes the trends by region, building type and energy service. The second chapter discusses China’s policies to promote green buildings. China began developing building energy codes in the 1980s. Over time, the central government has increased the stringency of the code requirements and the extent of enforcement. The codes are mandatory in all new buildings and major renovations in China’s cities, and they have been a driving force behind the expansion of China’s markets for insulation, efficient windows, and other green building materials. China also has several other important policies to encourage efficient buildings, including the Three-Star Rating System (somewhat akin to LEED), financial incentives tied to efficiency, appliance standards, a phasing out of incandescent bulbs and promotion of efficient lighting, and several policies to encourage retrofits in existing buildings. In the third chapter, we take “deep dives” into the trends affecting key building components

  1. 2001 - 2010 Danish design reference year. Reference climate dataset for technical dimensioning in building, construction and other sectors

    Energy Technology Data Exchange (ETDEWEB)

    Grunnet Wang, P.; Scharling, M.; Pagh Nielsen, K.; Kern-Hansen, C. [Danish Meteorological Institute (DMI), Copenhagen (Denmark); Wittchen, K.B. [Aalborg Univ., Danish Building Research Institute (SBi), Copenhagen (Denmark)

    2013-09-15

    This report presents the Danish Design Reference Year based on observed data from 2001 - 2010. In various sectors - i.e. building and construction, energy, etc. - the climate and weather usually plays a part in a given project. The Danish Design Reference Year dataset is a collection of data series for eleven specific parameters, that each represents a typical year in Denmark. The uses of the dataset may vary from simulations to statistical analysis, graphical overviews etc. The Danish land areas have been sectionalised into five to six climatological zones depending on the parameter, each characterized by distinct diurnal and yearly variations. The dataset consists of observed data from one station located within and representing each zone. In addition to the complete Danish Design Reference Year dataset, a subset specifically selected to be used for energy performance calculations for obtaining a building permit is included. (Author)

  2. Commercial Building Energy Saver: An energy retrofit analysis toolkit

    International Nuclear Information System (INIS)

    Hong, Tianzhen; Piette, Mary Ann; Chen, Yixing; Lee, Sang Hoon; Taylor-Lange, Sarah C.; Zhang, Rongpeng; Sun, Kaiyu; Price, Phillip

    2015-01-01

    Highlights: • Commercial Building Energy Saver is a powerful toolkit for energy retrofit analysis. • CBES provides benchmarking, load shape analysis, and model-based retrofit assessment. • CBES covers 7 building types, 6 vintages, 16 climates, and 100 energy measures. • CBES includes a web app, API, and a database of energy efficiency performance. • CBES API can be extended and integrated with third party energy software tools. - Abstract: Small commercial buildings in the United States consume 47% of the total primary energy of the buildings sector. Retrofitting small and medium commercial buildings poses a huge challenge for owners because they usually lack the expertise and resources to identify and evaluate cost-effective energy retrofit strategies. This paper presents the Commercial Building Energy Saver (CBES), an energy retrofit analysis toolkit, which calculates the energy use of a building, identifies and evaluates retrofit measures in terms of energy savings, energy cost savings and payback. The CBES Toolkit includes a web app (APP) for end users and the CBES Application Programming Interface (API) for integrating CBES with other energy software tools. The toolkit provides a rich set of features including: (1) Energy Benchmarking providing an Energy Star score, (2) Load Shape Analysis to identify potential building operation improvements, (3) Preliminary Retrofit Analysis which uses a custom developed pre-simulated database and, (4) Detailed Retrofit Analysis which utilizes real-time EnergyPlus simulations. CBES includes 100 configurable energy conservation measures (ECMs) that encompass IAQ, technical performance and cost data, for assessing 7 different prototype buildings in 16 climate zones in California and 6 vintages. A case study of a small office building demonstrates the use of the toolkit for retrofit analysis. The development of CBES provides a new contribution to the field by providing a straightforward and uncomplicated decision

  3. The French nuclear sector. Situation and predictions 2018 - Sectoral and competitive analysis

    International Nuclear Information System (INIS)

    2017-01-01

    This document comprises two reports. A first one, published and updated three times a year, and a second one which is a yearly publication. The first one, based on an analysis of market perspectives and of actor strategies, proposes a synthesis on the consequences of the evolution of the economic environment, on major trends noticed for the nuclear sector, and on predictable evolutions. It proposes the most recent data regarding the activities of more than 100 firms belonging to the sector (notably in terms of electric power production, of turnover for firms specialised in nuclear maintenance or in the fuel cycle). It highlights recent events for companies of the sector: takeovers, investments, restructuring, introduction of new products, and so on. It proposes a sector-based dashboard which contains all the critical figures useful to analyse the sector situation (activity determining factors, key figures for the sector and its environment). The annual report proposes a general presentation of the sector (determining factors of the activity, operated nuclear plants in the world, nuclear power production in the world, uranium production and consumption in the world, maintenance and improvement expenses on nuclear plants, electric power consumption and shares in power generation by different sources in France), an analysis of the evolution of the sector activity (trends, indicators, financial performance of actors in the maintenance of nuclear plants), an overview of important issues for the profession (growth issue despite the maturity of the French market, implications of intensification of foreign competition, of higher safety requirements, and of a decrease of nuclear energy profitability), and an analysis of the sector economic structure (turnovers, personnel, position of France among world exporters, equipment export structure, key figures for nuclear maintenance). The last part proposes presentations of 20 French actors and data and information sheets for 10

  4. Application of Building Information Modeling (3D and 4D in Construction Sector in Iraq

    Directory of Open Access Journals (Sweden)

    Kadhim Raheem Erzaij

    2017-10-01

    Full Text Available Building Information Modeling (BIM is becoming a great known established collaboration process in Architecture, Engineering, and Construction (AEC industry. In various cases in many countries, potential benefits and competitive advantages have been reported. However, despite the potentials and benefits of BIM technologies, it is not applied in the construction sector in Iraq just like many other countries of the world. The purpose of this research is to understand the uses and benefits of BIM for construction projects in Iraq. This purpose has been done by establishing a framework to application of BIM and identifying the benefits of this technology that would convince stakeholders for adopting BIM in the construction sector in Iraq. Through this research, the use of this technology has been clarified by using the proposed framework (application Revit software and linking it with the MS Project and Navisworks Manage software on the case study to identify the important benefits to be the beginning to apply the Building Information Modeling technology in the construction sector in Iraq. The research results indicated that such proposed framework can greatly improve the performance of the current state of project management through improving the project quality, cost saving and time-saving.

  5. Why is Design-Build Commonly Used in the Public Sector? An Illustration from Hong Kong

    Directory of Open Access Journals (Sweden)

    Edmond Lam

    2012-11-01

    Full Text Available The Design and Build (D&B procurement method is one of the systems advocated to overcome inadequacies with the traditional procurement method. In recent years, this innovative procurement method has been put to practice in Hong Kong where a vast amount of infrastructure works is taking place. This paper aims to illustrate the applicability of design-build in the Hong Kong setting.As most D&B projects are undertaken by the public sector of Hong Kong, the main features of a public sector project and reasons for its wider use on D&B are fully examined in the paper. To further explore the benefits of D&B in actual practice, structured interviews have been conducted with clients, contractors and consultants running D&B projects in Hong Kong. Summary of major problems of running D&B projects from the previous study by the authors is also outlined. With the increasing use of D&B in the public sector of Hong Kong and worldwide, more research can be undertaken on the quantitative comparison of the traditional mode of procurement and how to carry out a D&B project successfully so as to develop a knowledge base for the D&B procurement method.

  6. Marginal abatement cost and carbon reduction potential outlook of key energy efficiency technologies in China's building sector to 2030

    International Nuclear Information System (INIS)

    Xiao, He; Wei, Qingpeng; Wang, Hailin

    2014-01-01

    China achieved an energy savings of 67.5 Mtce in the building sector at the end of the 11th Five-Year Plan and set a new target of 116 Mtce by the end of the 12th Five-Year Plan. In this paper, an improved bottom-up model is developed to assess the carbon abatement potential and marginal abatement cost (MAC) of 34 selected energy-saving technologies/measures for China's building sector. The total reduction potential is 499.8 million t-CO 2 by 2030. 4.8 Gt-CO 2 potential will be achieved cumulatively to 2030. By 2030, total primary energy consumption of Chinese building sector will rise continuously to 1343 Mtce in the reference scenario and 1114 Mtce in the carbon reduction scenario. Total carbon dioxide emission will rise to 2.39 Gt-CO 2 and 1.9 Gt-CO 2 in two scenarios separately. The average carbon abatement cost of the aforementioned technologies is 19.5 $/t-CO 2 . The analysis reveals that strengthening successfully energy-saving technologies is important, especially for the residential building sector. The central government's direct investments in such technologies should be reduced without imposing significant negative effects. - Highlights: • MAC of 34 energy-saving technologies of China's building sector is calculated. • Energy use and CO 2 emission of China's building sector by 2030 is forecasted. • The reference and the carbon reduction scenarios are compared

  7. Sector trends and driving forces of global energy use and greenhouse gas emissions: focus in industry and buildings

    Energy Technology Data Exchange (ETDEWEB)

    Price, Lynn; Worrell, Ernst; Khrushch, Marta

    1999-09-01

    Disaggregation of sectoral energy use and greenhouse gas emissions trends reveals striking differences between sectors and regions of the world. Understanding key driving forces in the energy end-use sectors provides insights for development of projections of future greenhouse gas emissions. This report examines global and regional historical trends in energy use and carbon emissions in the industrial, buildings, transport, and agriculture sectors, with a more detailed focus on industry and buildings. Activity and economic drivers as well as trends in energy and carbon intensity are evaluated. The authors show that macro-economic indicators, such as GDP, are insufficient for comprehending trends and driving forces at the sectoral level. These indicators need to be supplemented with sector-specific information for a more complete understanding of future energy use and greenhouse gas emissions.

  8. Sector trends and driving forces of global energy use and greenhouse gas emissions: focus in industry and buildings

    International Nuclear Information System (INIS)

    Price, Lynn; Worrell, Ernst; Khrushch, Marta

    1999-01-01

    Disaggregation of sectoral energy use and greenhouse gas emissions trends reveals striking differences between sectors and regions of the world. Understanding key driving forces in the energy end-use sectors provides insights for development of projections of future greenhouse gas emissions. This report examines global and regional historical trends in energy use and carbon emissions in the industrial, buildings, transport, and agriculture sectors, with a more detailed focus on industry and buildings. Activity and economic drivers as well as trends in energy and carbon intensity are evaluated. The authors show that macro-economic indicators, such as GDP, are insufficient for comprehending trends and driving forces at the sectoral level. These indicators need to be supplemented with sector-specific information for a more complete understanding of future energy use and greenhouse gas emissions

  9. The needs of having a paradigm shift from public sector to private sector on funding digitizing management work of historical buildings in Malaysia

    Science.gov (United States)

    Kamarudin, M. K.; Yahya, Z.; Harun, R.; Jaapar, A.

    2014-02-01

    In Malaysia, the government agencies that handle the management of historical buildings are finding themselves facing a shortage of funds to provide the necessary work on digitalising management works. Due to the rising cost of management, which also covers maintenance and infrastructure works, there is a need for a paradigm shift from public sector to private sector provision on infrastructure and management works. Therefore the government agencies need to find the suitable mechanism to encourage private sector especially the private property and developers to take part in it. This scenario has encouraged the authorities to look new ways of entering into partnership and collaboration with the private sector to secure the continuity of provision and funding. The paper first reviews the different approach to facilitate off-site local management system of historical buildings and then examines options for both private and public funding in digitalising the historical buildings management works by interviewing government officer, conservator and member of nongovernment agencies. It then explores how the current system of management may adopt the shift to avoid any vulnerability and threat to the existing historical buildings. This paper concludes with a short summary of key issues in management works of historical buildings and recommendations.

  10. The needs of having a paradigm shift from public sector to private sector on funding digitizing management work of historical buildings in Malaysia

    International Nuclear Information System (INIS)

    Kamarudin, M K; Yahya, Z; Jaapar, A; Harun, R

    2014-01-01

    In Malaysia, the government agencies that handle the management of historical buildings are finding themselves facing a shortage of funds to provide the necessary work on digitalising management works. Due to the rising cost of management, which also covers maintenance and infrastructure works, there is a need for a paradigm shift from public sector to private sector provision on infrastructure and management works. Therefore the government agencies need to find the suitable mechanism to encourage private sector especially the private property and developers to take part in it. This scenario has encouraged the authorities to look new ways of entering into partnership and collaboration with the private sector to secure the continuity of provision and funding. The paper first reviews the different approach to facilitate off-site local management system of historical buildings and then examines options for both private and public funding in digitalising the historical buildings management works by interviewing government officer, conservator and member of nongovernment agencies. It then explores how the current system of management may adopt the shift to avoid any vulnerability and threat to the existing historical buildings. This paper concludes with a short summary of key issues in management works of historical buildings and recommendations

  11. The gas market and sector in France. Situation and predictions 2018 - Sector and competitive analysis

    International Nuclear Information System (INIS)

    2017-01-01

    Through a detailed analysis of market determining factors, of evolutions of supply and demand, and of major events in firms life, this set of two reports proposes an analysis of the recent situation of the gas sector and of the evolutions of the competitive game. The first report on situation and predictions which is updated three times a year, proposes a synthesis on the consequences of the evolution of the economic environment, on major trends noticed for the sector, and on predictable evolutions. It proposes the most recent predictions regarding natural gas consumption in France and the turnover of the gas sector. It highlights recent events for companies of the sector: takeovers, investments, restructuring, introduction of new products, and so on. It proposes a sector-based dashboard which contains all the critical figures useful to analyse the sector situation (activity determining factors, key figures for the sector and its environment). The second report (the annual one) proposes an overview of trends and competition within the gas sector. It gives an overview of some basic aspects of the activity (sector organisation, gas categories, main customer markets, gas consumption in industry), and of its determining factors, analyses the sector environment (sites connected to the natural gas network, evolution of average temperatures in France, production by chemical industry, by the food industry, and by metallurgy and oil refining, thermal production of electricity, regulatory evolution regarding supports to energy efficiency, and new opportunities). The evolution of the sector activity is analysed through its trends and indicators (turnovers, gas consumption, butane-propane deliveries, wholesale prices, regulated tariffs). The economic structure is also analysed: aspects related to the upstream part (extraction, injection of biogas, natural gas main input and output points, transport and storage, natural gas distribution), and aspects related to gas provision

  12. Sectoral dynamics and technological convergence: an evolutionary analysis of eco-innovation in the automotive sector

    DEFF Research Database (Denmark)

    Faria, Lourenco; Andersen, Maj Munch

    2017-01-01

    We know from evolutionary theory that sectoral characteristics are important to innovation. This paper investigates if sectoral characteristics also are important to eco-innovation, a hitherto under-researched theme. We argue that research into possible sectoral patterns in eco-innovation is key...... 1965 to 2012, focusing on powertrain technologies. The empirical analysis is based on patent data amongst big car producers and focuses on identifying changes in two main aspects: (1) the convergence/divergence of firms’ green strategies and technologies within the automotive sector; and (2......) the contribution of alternative key green technological trajectories relative to the dominant design. Our findings indicate that the evolution of relative green patenting has followed a positive, linear growth over the last decades with increasing participation of alternative propulsion technologies and increasing...

  13. Financial Analysis of the Financial Institutions Sector in Kosovo

    Directory of Open Access Journals (Sweden)

    Vlora Prenaj

    2015-12-01

    Full Text Available Paper work “Financial analysis of the financial institutions sector in Kosovo” treats financial sector in Kosovo. Paper work contains the current position of the economy, economic prospects and macroeconomic projections for the financial sector in Kosovo, future potential and possibilities of financial sector in Kosovo. The main goal of this research is financial analysis of Kosovo financial institutions sector - overview of key indicators. This research evaluates the performances of commercial bank’s profitability, which have operated in the market during the period 2006-2012. This research is conducted through financial analysis coefficients: Return on Equity, Return on assets and Cost to Income. Test t-Student is used to analyze the profitability for the period 2006/2007 before the financial crisis and the period 2011/2012 after financial crisis.

  14. Evaluation and analysis of energy consumption in office buildings; Feldstudie zum Energieverbrauch von Buerogebaeuden

    Energy Technology Data Exchange (ETDEWEB)

    Maas, Stefan; Scholzen, Frank; Thewes, Andreas; Waldmann, Daniele [Universitaet Luxemburg, Campus Kirchberg, Fakultaet fuer Naturwissenschaften, Technologie und Kommunikation, Forschungseinheit Ingenieurswissenschaften, Luxemburg (Luxembourg); Zuerbes, Arno [Fachhochschule Bingen, Fachbereich Technik, Informatik und Wirtschaft, Bingen am Rhein (Germany)

    2011-06-15

    During the last years the national energy consumption of Luxembourg shifted noticeable towards the building sector. In 1990 71 % of the total domestic end energy consumption was ascribed to industrial sector and only 20 % to the building sector. The distribution changed significantly and in 2005 the energy consumption dedicated to industrial sector represented only 44 %, transport 25 % and the tertiary sector 31 % [1], which includes private and public households as well as non-residential buildings. The buildings account for 40 % of total energy consumption in the EU and there is an enormous energy saving potential. Therefore the EUdirective 2002/91/EG [2] requires from all EU Member States to save energy in this sector. Hence the energy saving of buildings present an essential part of climate protection. Furthermore the new directive 2010/31/EG [3] requires from the Member States to tighten national standards and to draw up national plans for increasing the number of nearly zero-energy buildings. But for a better understanding of energy flows in buildings and to develop energy saving concepts as well as to estimate possible energy savings of buildings a detailed analysis of energy consumption databases is an important precondition. The following field survey monitors 47 office buildings in Luxembourg. A separate gathering of electricity, heat and cooling energy consumptions allowed a detailed energetic analysis. A statistical analysis and interpretation of new buildings differentiated by energy sources as well as definition of energy relevant parameters like the window ratio, the construction method, the type of use or the kind of technical installations show the problems of typical existing office buildings. A final extrapolation to the population of all new office buildings in Luxembourg helps to estimate the energy saving potential.

  15. ANALYSIS OF INTER SECTORAL LINKAGES IN SEMARANG REGENCY

    Directory of Open Access Journals (Sweden)

    Fafurida

    2014-03-01

    Full Text Available This research aims to analyze inter economic sectoral linkages and to arrange the Klassen typology of economic sectors in Semarang Regency. The Klassen typology is composed from the result of the linkage analysis. To construct the analysis, this paper also utulizes the input-output analysis. It finds that service sector has the highest backward linkage while farming sector has the highest forward linkage. Based on the Klassen typology analysis, sectors with the highest backward and forward linkages and potential to be the leading sector are farming sector, dan trade, hotel and restaurant sector.Keywords: Backward linkage,forward linkage, Klassen typologyJEL classification number: R15, O21AbstrakPenelitian ini bertujuan untuk mengkaji seberapa besar keterkaitan antar sektor ekonomi di Kabupaten Semarang dan memetakan tipologi Klassennya. Tipologi Klasen disusun berdasarkan hasil perhitungan analisis keterkaitannya. Untuk menyusun analisis tersebut, paper ini juga menggunakan analisis input-output. Hasil penelitian menunjukkan bahwa sektor jasa memiliki keterkaitan ke belakang tertinggi dibandingkan dengan sektor lainnya. Sementara itu, sektor pertanian merupakan sektor yang memiliki keterkaitan ke depan tertinggi. Berdasarkan hasil analisis tipologi Klassen, sektor yang memiliki keterkaitan ke depan dan ke belakang yang tinggi dan dapat menjadi sektor unggulan adalah sektor perdagangan, hotel dan sektor restoran.Kata kunci: Keterkaitan ke belakang, keterkaitan ke depan, tipologi KlassenJEL classification numbers: R15, O21

  16. Energy demand analysis in the household, commercial and agriculture sector

    International Nuclear Information System (INIS)

    Lapillonne, B.

    1991-01-01

    This chapter of the publication is dealing with Energy Demand Analysis in the Household, Commercial and Agricultural Sector. Per Capita total energy consumption in the residential and commercial sector is given and variation among countries are discussed. 12 figs, 1 tab

  17. The effect of environmental regulation on firms' competitive performance: the case of the building & construction sector in some EU regions.

    Science.gov (United States)

    Testa, Francesco; Iraldo, Fabio; Frey, Marco

    2011-09-01

    There is a considerable debate on the effects of environmental regulation on competitive performance. Based on survey data, this paper analyzes the two main research questions, derived from literature, on the links between environmental regulation and competitiveness, by focusing on firms operating in the building and construction sector, i.e.: 1) whether environmental policy stringency affects the competitive performance of firms in the building and construction sector 2) and how a specific form of environmental regulation (direct regulation, economic instruments and soft instruments) affects this performance? By applying a regression analysis, we find that a more stringent environmental regulation, measured by inspection frequency, provides a positive impulse for increasing investments in advanced technological equipment and innovative products and on business performance. Moreover, a well-designed "direct regulation" appears to be the most effective policy instrument for prompting the positive impact of environmental policies on innovation and intangible performance while economic instruments do negatively affect business performance. Copyright © 2011 Elsevier Ltd. All rights reserved.

  18. The energy investment decision in the nonresidential building sector: Research into the areas of influence

    Energy Technology Data Exchange (ETDEWEB)

    Harkreader, S.A.; Ivey, D.L.

    1987-04-01

    The purpose of this report is to describe and to characterize the decision process in the nonresidential building sector as well as the variables influencing energy investment decisions, both of which impact the development of R and D agendas for the Office of Building and Community Systems (BCS). The report reviews the available information on the factors that influence energy investment decisions and identifies information gaps where additional research is needed. This report focuses on variables and combinations of these variables (descriptive states) that influence the non residential energy investment decision maker. Economic and demographic descriptors, energy investment decision maker characteristics, and variables affecting energy investments are identified. This response examines the physical characteristics of buildings, characteristics of the legal environment surrounding buildings, demographic factors, economic factors, and decision processes, all of which impact the nonresidential energy investment market. The emphasis of the report is on providing possible methodologies for projecting the future of the nonresidential energy investment market, as well as, collecting the data necessary for such projections. The use of alternate scenarios is suggested as a projection tool and suggestions for collecting the appropriate data are made in the recommendations.

  19. Analysis of sectoral energy conservation in Malaysia

    Energy Technology Data Exchange (ETDEWEB)

    Al-Mofleh, Anwar; Taib, Soib; Salah, Wael [School of Electrical and Electronics Engineering, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang (Malaysia); Mujeebu, M. Abdul [School of Mechanical Engineering, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang (Malaysia)

    2009-06-15

    The electrical energy consumption in Malaysia has increased sharply in the past few years, and modern energy efficient technologies are desperately needed for the national energy policy. This article presents a comprehensive picture of the current status of energy consumption and various energy conservation options viable for Malaysian environment. A detailed survey is made to assess the consumption pattern and the existing techniques for energy efficiency. Based on the survey, the feasibility of improving the available systems and adopting new programs in different sectors is investigated. The study reveals the fact that the energy conservation policy of the country has been fairly improved in the last ten years. However the country has to pay more attention to this area and make urgent measures to adopt more energy efficient technologies in various sectors. (author)

  20. Analysis of sectoral energy conservation in Malaysia

    International Nuclear Information System (INIS)

    Al-Mofleh, Anwar; Taib, Soib; Mujeebu, M. Abdul; Salah, Wael

    2009-01-01

    The electrical energy consumption in Malaysia has increased sharply in the past few years, and modern energy efficient technologies are desperately needed for the national energy policy. This article presents a comprehensive picture of the current status of energy consumption and various energy conservation options viable for Malaysian environment. A detailed survey is made to assess the consumption pattern and the existing techniques for energy efficiency. Based on the survey, the feasibility of improving the available systems and adopting new programs in different sectors is investigated. The study reveals the fact that the energy conservation policy of the country has been fairly improved in the last ten years. However the country has to pay more attention to this area and make urgent measures to adopt more energy efficient technologies in various sectors.

  1. Analysis of Health Sector Budget of Nepal.

    Science.gov (United States)

    Dulal, R K; Magar, A; Karki, S D; Khatiwada, D; Hamal, P K

    2014-01-01

    Primarily, health sector connects two segments - medicine and public health, where medicine deals with individual patients and public health with the population health. Budget enables both the disciplines to function effectively. The Interim Constitution of Nepal, 2007 has adapted the inspiration of federalism and declared the provision of basic health care services free of cost as a fundamental right, which needs strengthening under foreseen federalism. An observational retrospective cohort study, aiming at examining the health sector budget allocation and outcome, was done. Authors gathered health budget figures (2001 to 2013) and facts published from authentic sources. Googling was done for further information. The keywords for search used were: fiscal federalism, health care, public health, health budget, health financing, external development partner, bilateral and multilateral partners and healthcare accessibility. The search was limited to English and Nepali-language report, articles and news published. Budget required to meet the population's need is still limited in Nepal. The health sector budget could not achieve even gainful results due to mismatch in policy and policy implementation despite of political commitment. Since Nepal is transforming towards federalism, an increased complexity under federated system is foreseeable, particularly in the face of changed political scenario and its players. It should have clear goals, financing policy and strict implementation plans for budget execution, task performance and achieving results as per planning. Additionally, collection of revenue, risk pooling and purchasing of services should be better integrated between central government and federated states to horn effectiveness and efficiency.

  2. The Impact of Chinese FDI on Employment Generation in the Building and Construction Sector of Ghana

    Directory of Open Access Journals (Sweden)

    Kwasi Boakye – Gyasi

    2015-07-01

    Full Text Available One of the major concerns of governments in Africa in general and Ghana in particular is unemployment and underemployment. Most developing countries especially African countries compete to attract foreign direct investment (FDI into their economies with the desire of improving employment level and securing a sustainable development leading to economic growth. In view of this, the creation of jobs for the unemployed and technology transfer through Chinese investments has become complementary since Chinese FDI can be an important source for employment, economic growth and transformation processes. This study focuses on the contribution of China’s FDI on employment generation in the building and construction sector of Ghana. By using a robust regression model, the results show that, Chinese FDI flows on employment through direct effects on building and construction sector of Ghana have positive and significance on employment growth. This means that, Chinese FDI contributes to an efficient workforce which benefits an economy from high productivity and leads to growth in individual household incomes.

  3. Heath Sector Network Governance and State-building in South Kivu, Democratic Republic of Congo.

    Science.gov (United States)

    Bwimana, Aembe

    2017-12-01

    Longstanding patterns of interaction exist between state and non-state actors seeking to improve public health in Democratic Republic of Congo (DRC). DRC is a weak state, and, in many cases, private actors have stepped in to fill the void created by the lack of state health care provision. However, the role of these interactions in creating a governance network in the health sector has been underexplored. Using data from 18 months of qualitative field research, this study aimed to explore governance networks in DRC's health sector, examining how multiple stakeholders work to manage the health system and how the resulting governance network has been relevant for the state-building process. The findings demonstrate that the health sector in South Kivu is emerging as an arena of networked governance based on active partnerships between state institutions and non-state actors. Interactions between state and non-state actors account for the persistence of the health sector in a setting characterized by state weakness. However, networked governance does not function optimally, because, although non-state interventions fill the void where the state falls short, the DRC state has faced the challenge of interacting with partners with fragmented and horizontally competing agendas. Although weak, the shadow of state authority is present in the arena of stakeholders' interactions, as the state plays a determining role by providing a regulatory framework. Overall, the findings show that the interactive engagement of non-state actors contributes to improving institutional capacity through these actors' engagement with state institutions for health system management and institutional development. However, although networked health sector governance does contribute to state capacity, it is difficult to assess the real influence of these interactions on the state-building process in a context of critical fragility, where coordination and alignment have been problematic. © The

  4. Analysis of Public Sector Efficiency in Developed Countries

    Directory of Open Access Journals (Sweden)

    Ivan Lovre

    2017-06-01

    Full Text Available The public sector in developed countries went through various forms of transformation in the twentieth century. The expansion of the public sector resulted in high levels of public spending in developed countries. The financial crisis of 2008 led to recessions in the economies of developed countries, the public debt growth, and actualized the issue of the public sector optimal size and efficiency. This study analysed the public sector efficiency in 19 developed countries. The analysis focuses on the relationship between the size of public expenditure and economic growth in the global financial crisis and the measures implemented. The aim of the research in this paper is a comparison of total and partial efficiency of the public sector in developed countries, in order to determine the characteristics of the public sector operations. The comparison covers the areas of the public sector operations in order to identify sources of inefficiency. Partial and overall efficiency of countries are analysed with different size and concept of the public sector, to determine the relationship between the public sector size, efficiency and welfare of citizens. The research results clearly indicate (unjustified state intervention in developed countries.

  5. National Green Building Standard Analysis

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2012-07-01

    DOE's Building America Program is a research and development program to improve the energy performance of new and existing homes. The ultimate goal of the Building America Program is to achieve examples of cost-effective, energy efficient solutions for all U.S. climate zones. Periodic maintenance of an ANSI standard by review of the entire document and action to revise or reaffirm it on a schedule not to exceed five years is required by ANSI. In compliance, a consensus group has once again been formed and the National Green Building Standard is currently being reviewed to comply with the periodic maintenance requirement of an ANSI standard.

  6. Building a comprehensive mill-level database for the Industrial Sectors Integrated Solutions (ISIS) model of the U.S. pulp and paper sector.

    Science.gov (United States)

    Modak, Nabanita; Spence, Kelley; Sood, Saloni; Rosati, Jacky Ann

    2015-01-01

    Air emissions from the U.S. pulp and paper sector have been federally regulated since 1978; however, regulations are periodically reviewed and revised to improve efficiency and effectiveness of existing emission standards. The Industrial Sectors Integrated Solutions (ISIS) model for the pulp and paper sector is currently under development at the U.S. Environmental Protection Agency (EPA), and can be utilized to facilitate multi-pollutant, sector-based analyses that are performed in conjunction with regulatory development. The model utilizes a multi-sector, multi-product dynamic linear modeling framework that evaluates the economic impact of emission reduction strategies for multiple air pollutants. The ISIS model considers facility-level economic, environmental, and technical parameters, as well as sector-level market data, to estimate the impacts of environmental regulations on the pulp and paper industry. Specifically, the model can be used to estimate U.S. and global market impacts of new or more stringent air regulations, such as impacts on product price, exports and imports, market demands, capital investment, and mill closures. One major challenge to developing a representative model is the need for an extensive amount of data. This article discusses the collection and processing of data for use in the model, as well as the methods used for building the ISIS pulp and paper database that facilitates the required analyses to support the air quality management of the pulp and paper sector.

  7. Building a Comprehensive Mill-Level Database for the Industrial Sectors Integrated Solutions (ISIS) Model of the U.S. Pulp and Paper Sector

    Science.gov (United States)

    Modak, Nabanita; Spence, Kelley; Sood, Saloni; Rosati, Jacky Ann

    2015-01-01

    Air emissions from the U.S. pulp and paper sector have been federally regulated since 1978; however, regulations are periodically reviewed and revised to improve efficiency and effectiveness of existing emission standards. The Industrial Sectors Integrated Solutions (ISIS) model for the pulp and paper sector is currently under development at the U.S. Environmental Protection Agency (EPA), and can be utilized to facilitate multi-pollutant, sector-based analyses that are performed in conjunction with regulatory development. The model utilizes a multi-sector, multi-product dynamic linear modeling framework that evaluates the economic impact of emission reduction strategies for multiple air pollutants. The ISIS model considers facility-level economic, environmental, and technical parameters, as well as sector-level market data, to estimate the impacts of environmental regulations on the pulp and paper industry. Specifically, the model can be used to estimate U.S. and global market impacts of new or more stringent air regulations, such as impacts on product price, exports and imports, market demands, capital investment, and mill closures. One major challenge to developing a representative model is the need for an extensive amount of data. This article discusses the collection and processing of data for use in the model, as well as the methods used for building the ISIS pulp and paper database that facilitates the required analyses to support the air quality management of the pulp and paper sector. PMID:25806516

  8. ANALYSIS OF CHINESE GARMENT EXPORT SECTOR

    OpenAIRE

    Zhang, Mina

    2009-01-01

    This paper analyzes the Chinese garment export sector. The Chinese garment industry has been an economic pillar ever since the open-door policy and economic reforms of the country took effect in 1979. Earnings from apparel exports have been a major source of foreign revenue. The industry has thus developed and played a vital role in the growth of China?s foreign trade and economic development although some signs of slackened vigour have been revealed recently. To assess the threats and opport...

  9. Simulation of the GHG Abatement Potentials in the U.S. Building Sector by 2050

    Energy Technology Data Exchange (ETDEWEB)

    Stadler, Michael; DeForest, Nicholas; Marnay, Chris; Bonnet, Florence; Lai, Judy; Phan, Trucy

    2010-10-01

    Given the substantial contribution of the U.S. building sector to national carbon emissions, it is clear that to address properly the issue of climate change, one must first consider innovative approaches to understanding and encouraging the introduction of new, low-carbon technologies to both the commercial and residential building markets. This is the motivation behind the development of the Stochastic Lite Building Module (SLBM), a long range, open source model to forecast the impact of policy decisions and consumer behavior on the market penetration of both existing and emerging building technologies and the resulting carbon savings. The SLBM, developed at Lawrence Berkeley National Laboratory (LBNL), is part of the Stochastic Energy Deployment System (SEDS) project, a multi-laboratory effort undertaken in conjunction with the National Renewable Energy Laboratory (NREL), Pacific Northwest National Laboratory (PNNL), Argonne National Laboratory (ANL) and private companies. The primary purpose of SEDS is to track the performance of different U.S. Department of Energy (USDOE) Research and Development (R&D) activities on technology adoption, overall energy efficiency, and CO{sub 2} reductions throughout the whole of the U.S. economy. The tool is fundamentally an engineering-economic model with a number of characteristics to distinguish it from existing energy forecasting models. SEDS has been written explicitly to incorporate uncertainty in its inputs leading to uncertainty bounds on the subsequent forecasts. It considers also passive building systems and their interactions with other building service enduses, including the cost savings for heating, cooling, and lighting due to different building shell/window options. Such savings can be compared with investments costs in order to model real-world consumer behavior and forecast adoption rates. The core objective of this paper is to report on the new window and shell features of SLBM and to show the implications of

  10. SECTORAL ANALYSIS: GROWTH ACCOUNTING OF TERTIARY INDUSTRIES

    Directory of Open Access Journals (Sweden)

    Yahya Z. ALSHEHHI

    2017-08-01

    Full Text Available The tertiary sector is one of the modern styles of economic systems in view of the share it occupies in the field of production as well as employment occupied share. Hence, just like other lands, the UAE, witnessed an economic structural change similar to developed and developing nations, where the tertiary industries contributed 55.4% in 2015 to total country’s income. The empirical study aimed to analyze the contribution portion of growth in the tertiary industries through using the growth accounting framework in time-series from 1990 to 2015. The empirical study found that most of the industries contributed significantly to the growth of the tertiary sector. The contribution shares of growth due to labor and capital varied among industries. The main observed results show that there was a vice versa relationship between TFP performance and the size of labor, where the TFP positively corresponded with the decline in the size of labor specifically from 2010-2015.

  11. Convergence Among the Submarkets in Australian Regional Building and Construction Sector

    Directory of Open Access Journals (Sweden)

    Junxiao Liu

    2010-12-01

    Full Text Available Studies on market convergence are well considered in the literature. However, the majority of the previous research focused on housing markets and few studies have concentrated on construction markets. Owing to a simultaneously dramatic increase in the construction prices of the sub-markets in the building construction sector in Australia, this paper aims to identify the convergence among these markets, involving house construction market, other-residential building construction market, and non-residential building construction market. To achieve it the Granger causality test and generalized response function depending on the vector error correction model with the quarterly data of Australia’s eight states from 1998 to 2010 will be applied. Based upon the econometric tests, the price diffusion patterns among these construction markets have been identified. Research on the convergences of construction markets not only helps construction firms perform well in business operations and arbitrage activities, but also provides policy makers with useful information for enacting effective construction policies for national perspectives and approaches to infrastructure planning.

  12. Consistent economic cross-sectoral climate change impact scenario analysis: Method and application to Austria

    Directory of Open Access Journals (Sweden)

    Karl W. Steininger

    2016-03-01

    Full Text Available Climate change triggers manifold impacts at the national to local level, which in turn have various economy-wide implications (e.g. on welfare, employment, or tax revenues. In its response, society needs to prioritize which of these impacts to address and what share of resources to spend on each respective adaptation. A prerequisite to achieving that end is an economic impact analysis that is consistent across sectors and acknowledges intersectoral and economy-wide feedback effects. Traditional Integrated Assessment Models (IAMs are usually operating at a level too aggregated for this end, while bottom-up impact models most often are not fully comprehensive, focusing on only a subset of climate sensitive sectors and/or a subset of climate change impact chains. Thus, we develop here an approach which applies climate and socioeconomic scenario analysis, harmonized economic costing, and sector explicit bandwidth analysis in a coupled framework of eleven (biophysical impact assessment models and a uniform multi-sectoral computable general equilibrium model. In applying this approach to the alpine country of Austria, we find that macroeconomic feedbacks can magnify sectoral climate damages up to fourfold, or that by mid-century costs of climate change clearly outweigh benefits, with net costs rising two- to fourfold above current damage cost levels. The resulting specific impact information – differentiated by climate and economic drivers – can support sector-specific adaptation as well as adaptive capacity building. Keywords: climate impact, local impact, economic evaluation, adaptation

  13. Impact analysis of leading sub sector on basic sector to regional income in Siak Regency, Riau Province

    Science.gov (United States)

    Astuti, P.; Nugraha, I.; Abdillah, F.

    2018-02-01

    During this time Siak regency only known as oil producing regency in Riau province, but based on the vision of spatial planning Siak’s regency in 2031 there was a shift from petroleum towards to other sectors such as agribusiness, agroindustry and tourism. The purpose of this study was to identify the sector base, the leading subsectors and shift with their characteristics and to identify the leading subsectors development priority. The method used in this research consisted of the method of Location Quotient (LQ, Shift Share, and Overlay method). The research results were used Location Quotient (LQ) to identify sector’s base in Siak regency based on the document of PDRB. The sector’s refers to the constant prices year of 2000 were mining and quarrying sector (2.25). The sector’s base using document of PDRB at constant prices 2000 without oil and gas sector was the agricultural sector with a value of LQ was 2,45. The leading sub sector in the Siak regency with mining and quarrying sector was oil and gas (1.02) and leading sub sector without oil and gas sector was the plantation sector (1.48) and forestry sector (1.73). Overlay analysis results shown that agriculture sector as a sector base and plantation and forestry as a leading sub sector has positive value and categorize as progressive and competitiveness. Because of that, this leading sub sector gets high priority to developing.

  14. Stimulating energy-efficient innovations in the Dutch building sector: Empirical evidence from patent counts and policy lessons

    International Nuclear Information System (INIS)

    Noailly, Joelle; Batrakova, Svetlana

    2010-01-01

    In the Netherlands where the building sector accounts for 33% of carbon emissions, the government aims to halve the total energy use from buildings by 2030 compared to 1990 levels. To this end, the Dutch government has set specific goals in order to foster technological innovation related to energy efficiency in buildings. The objective of this paper is to explore the links between technological innovation and public policies in this sector over the last 30 years. The paper aims (1) to measure the evolution of innovations related to energy efficiency in buildings in the Netherlands using patent counts and (2) to provide a historical overview of the policy framework. Descriptive data on patenting activities show that the Netherlands have a clear comparative advantage in the field of energy-saving lighting technologies, mainly due to intensive patenting activities by Philips. High-efficiency boilers also represent a substantial share of Dutch innovation activities in this domain over the last decades. In many other fields (such as insulation, heat-pumps and cogeneration, solar boilers, etc.), however, Germany, Austria and Scandinavian countries rank much higher than the Netherlands. The descriptive analysis of Dutch energy policy shows an intensification of energy policy in the mid-1990s, followed by a slight decline after 2001. Overall, the simultaneous introduction of policy instruments makes it difficult to evaluate the effectiveness of policies. Also, the policy framework is characterized by the introduction of a large number of short-lived policy instruments and frequent policy changes. The lack of stability and continuity of energy policy may be damaging for innovation. - Research Highlights: →The Netherlands are a top innovative country in the field of energy-efficient innovations for buildings, mainly due to high patenting activities by Philips in energy-saving lighting technologies. →In many other fields (insulation, heat-pumps, etc) Germany, Austria and

  15. South Africa's electricity consumption: A sectoral decomposition analysis

    International Nuclear Information System (INIS)

    Inglesi-Lotz, Roula; Blignaut, James N.

    2011-01-01

    Highlights: → We conduct a decomposition exercise of the South African electricity consumption. → The increase in electricity consumption was due to output and structural changes. → The increasing at a low rate electricity intensity was a decreasing factor to consumption. → Increases in production were proven to be part of the rising trend for all sectors. → Only 5 sectors' consumption were negatively affected by efficiency improvements. -- Abstract: South Africa's electricity consumption has shown a sharp increase since the early 1990s. Here we conduct a sectoral decomposition analysis of the electricity consumption for the period 1993-2006 to determine the main drivers responsible for this increase. The results show that the increase was mainly due to output or production related factors, with structural changes playing a secondary role. While there is some evidence of efficiency improvements, indicated here as a slowdown in the rate of increase of electricity intensity, it was not nearly sufficient to offset the combined production and structural effects that propelled electricity consumption forward. This general economy-wide statement, however, can be misleading since the results, in essence, are very sector specific and the inter-sectoral differences are substantial. Increases in production were proven to be part of the rising trend for all sectors. However, only five out of fourteen sectors were affected by efficiency improvements, while the structural changes affected the sectors' electricity consumption in different ways. These differences concerning the production, structural and efficiency effects on the sectors indicate the need for a sectoral approach in the energy policy-making of the country rather than a blanket or unilateral economy-wide approach.

  16. Government regulation as an impetus for innovation: Evidence from energy performance regulation in the Dutch residential building sector

    International Nuclear Information System (INIS)

    Beerepoot, Milou; Beerepoot, Niels

    2007-01-01

    The recent implementation of energy performance policy as a way to tackle energy consumption in the building sector in Europe draws attention to the effect it has on the development and diffusion of energy-saving innovations. According to innovation system literature, government regulation through norms and standards is one of the factors stimulating innovation. This paper concentrates on the role of stricter government regulation as an incentive to innovation in the Dutch residential building sector. Innovation in this sector is predominantly a process of applying incremental modifications to comply with new and stricter government regulations and standards. Energy performance policy in its current shape will therefore not contribute to the diffusion of really new innovation in energy techniques for residential buildings in the Netherlands. If diffusion of really new innovation is an explicit aim of energy performance policy then the European wide introduction of this scheme needs reconsideration

  17. The Linkage between China’s Foreign Direct Investment and Ghana’s Building and Construction Sector Performance

    Directory of Open Access Journals (Sweden)

    Kwasi BOAKYE-GYASI

    2016-11-01

    Full Text Available Over the years, China has contributed immensely to the development process of Ghana through foreign direct investments; providing financial aids’ improved management training skills, and the transfer of innovation and technological techniques. This research examines the relationship between China’s foreign direct investment and Ghana’s building and construction sector performance. By using a robust regression model, the results show that China’s FDI in Ghana’s building and construction sector has significant positive effect on the economic growth of Ghana due to strong increase in investors’ confidence in the Ghanaian economy. Thus, FDI contributes to economic growth when there is an improvement of the infrastructure and operational skills of the local building and construction companies. This will lead to the increase of revenue for citizens who are employed in this sector and thus leading to the overall economic development of the country.

  18. Building state capacity in Russia: A case study of energy sector reform, 1992--1998

    Science.gov (United States)

    Kim, Younkyoo

    This study seeks an explanation for the neglect of state building in Russia. The major hypothesis is that dependence on external rent leads to the weakness of the state. Three intervening variables---transaction costs, bargaining power of the state, and discount rates---are posited to explain variance on the dependent variable, the weakness of the state. Based on the exploration of three dimensions of energy sector reform, the dissertation argues that in the short run resource rents may be the only reliable and adequate source of finance for the Russian government. The division of resource rents among the many claimants (state vs. business, state vs. society, Moscow vs. regions, and Russia vs. foreign companies), it submits, will pose a stringent test of the viability of democratic governance in Russia. The dissertation concludes that some evidence indicates that Russia has in fact met the characteristics of the rentier state. The greater reliance on a large resource sector for revenue has led to high transaction costs of tax collection, weak bargaining power of the state, and high discount rates of government officials in Russia.

  19. ANALYSIS OF AGRARIAN SECTOR RESOURCE PROVIDING IN UKRAINE

    Directory of Open Access Journals (Sweden)

    Iryna Bezpyata

    2016-11-01

    Full Text Available The aim of this article is an analysis of material well-being level in agrarian sector of economy by productive resources (by land, labour, hardware providing with that provides efficiency of economic activity and ground of basic directions of the rational bringing in and use of resource potential of agrarian sector of economy in Ukraine in market conditions. Research methodology consists in the use of statistical and economic research methods for analysis of productive resources using modern state of agriculture for period from 2010 to 2014 years. Research results show that the resource providing agrarian sector development can be defined as totality of certain types of resources (land, technological, labour, financial and sources of their forming, directly participating in the processes of agrarian sector economies development that can be mobilized with the purpose of providing the scale using of their potential possibilities and transition of agriculture to the qualitatively new state. Analysis of the modern state of material well-being of agrarian sector resources of economy in Ukraine is unsatisfactory and with every year gets worse. To overcome this problem agricultural commodity producers are unable only by themselves. For the improvement of the economic state of agrarian sector of economy in whole country and regional state support of home agricultural producer, stimulation of his activity is needed. And first of all the self-weighted investment policy of the state should become such measures in the agrarian sector of economy that will allow bringing in of greater amount of investment resources for the improvement of technical equipment at agricultural enterprises, development of production co-operation and products sale, introduction of personnel management modern methodology, increase in labour activity level in agrarian sector, realization of the permanent updating and increase in products quality control, etc. Practical value. Got

  20. Analysis and Optimization of Building Energy Consumption

    Science.gov (United States)

    Chuah, Jun Wei

    Energy is one of the most important resources required by modern human society. In 2010, energy expenditures represented 10% of global gross domestic product (GDP). By 2035, global energy consumption is expected to increase by more than 50% from current levels. The increased pace of global energy consumption leads to significant environmental and socioeconomic issues: (i) carbon emissions, from the burning of fossil fuels for energy, contribute to global warming, and (ii) increased energy expenditures lead to reduced standard of living. Efficient use of energy, through energy conservation measures, is an important step toward mitigating these effects. Residential and commercial buildings represent a prime target for energy conservation, comprising 21% of global energy consumption and 40% of the total energy consumption in the United States. This thesis describes techniques for the analysis and optimization of building energy consumption. The thesis focuses on building retrofits and building energy simulation as key areas in building energy optimization and analysis. The thesis first discusses and evaluates building-level renewable energy generation as a solution toward building energy optimization. The thesis next describes a novel heating system, called localized heating. Under localized heating, building occupants are heated individually by directed radiant heaters, resulting in a considerably reduced heated space and significant heating energy savings. To support localized heating, a minimally-intrusive indoor occupant positioning system is described. The thesis then discusses occupant-level sensing (OLS) as the next frontier in building energy optimization. OLS captures the exact environmental conditions faced by each building occupant, using sensors that are carried by all building occupants. The information provided by OLS enables fine-grained optimization for unprecedented levels of energy efficiency and occupant comfort. The thesis also describes a retrofit

  1. DSM Electricity Savings Potential in the Buildings Sector in APP Countries

    Energy Technology Data Exchange (ETDEWEB)

    McNeil, MIchael; Letschert, Virginie; Shen, Bo; Sathaye, Jayant; de la Ru du Can, Stephane

    2011-01-12

    The global economy has grown rapidly over the past decade with a commensurate growth in the demand for electricity services that has increased a country's vulnerability to energy supply disruptions. Increasing need of reliable and affordable electricity supply is a challenge which is before every Asia Pacific Partnership (APP) country. Collaboration between APP members has been extremely fruitful in identifying potential efficiency upgrades and implementing clean technology in the supply side of the power sector as well established the beginnings of collaboration. However, significantly more effort needs to be focused on demand side potential in each country. Demand side management or DSM in this case is a policy measure that promotes energy efficiency as an alternative to increasing electricity supply. It uses financial or other incentives to slow demand growth on condition that the incremental cost needed is less than the cost of increasing supply. Such DSM measures provide an alternative to building power supply capacity The type of financial incentives comprise of rebates (subsidies), tax exemptions, reduced interest loans, etc. Other approaches include the utilization of a cap and trade scheme to foster energy efficiency projects by creating a market where savings are valued. Under this scheme, greenhouse gas (GHG) emissions associated with the production of electricity are capped and electricity retailers are required to meet the target partially or entirely through energy efficiency activities. Implementation of DSM projects is very much in the early stages in several of the APP countries or localized to a regional part of the country. The purpose of this project is to review the different types of DSM programs experienced by APP countries and to estimate the overall future potential for cost-effective demand-side efficiency improvements in buildings sectors in the 7 APP countries through the year 2030. Overall, the savings potential is estimated to be

  2. Evaluation of the Contribution of the Building Sector to PM2.5 Emissions in China

    Energy Technology Data Exchange (ETDEWEB)

    Khanna, Nina [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Zhou, Nan [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Ke, Jing [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Fridley, David [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2014-11-01

    In this study, we quantify the current and potential contribution of China’s building sector to direct primary and indirect PM2.5 emissions and co-benefits of key pollution reduction strategies of energy efficiency, fuel switching and pollution control technologies on PM2.5 emissions reduction. We use a bottom-up end-use accounting model to model residential and commercial buildings’ coal demand for heating and electricity demand in China’s Northern and Transition climate zones from 2010 to 2030. The model is then used to characterize the current coal-based heating (e.g., district heating, combined heat and power generation, small-scale coal-fired boilers) and power generation technologies to estimate direct and indirect PM2.5 emissions. Model scenarios are developed to evaluate and compare the potential co-benefits of efficiency improvements, fuel switching and pollution control technologies in reducing building-related direct and indirect PM2.5 emissions. An alternative pathway of development in which district heating is introduced to China’s Transition zone to meet growing demand for heat is also modeled to evaluate and quantify the potential impact on PM2.5 emissions.

  3. Modelling energy savings in the Danish building sector combined with internalisation of health related externalities in a heat and power system optimisation model

    International Nuclear Information System (INIS)

    Zvingilaite, Erika

    2013-01-01

    A substantial untapped energy saving potential rests in the building sector and is expected to play an important role in achieving reduction of environmental impacts of energy. In order to utilise this potential, effective policy measures need to be adopted to remove the existing barriers and create incentives. For that purpose, the cost effective energy saving options together with an optimal level of savings and expected environmental benefits have to be identified. The paper reports on a study that analyses these questions by including heat-saving measures in buildings into an energy system optimisation model of the Danish heat and power sector. The achieved optimal level of heat savings reaches 11% of projected heat demand in 2025 under the model assumptions. Moreover, the analysis reveals the importance of considering energy conservation options in a system wide perspective. Furthermore, the results suggest that changes in the energy generation sector are the prime driver behind the reduction of environmental externalities of energy. Heat savings in buildings play only a small role under model assumptions. - Highlights: ► Heat savings in buildings are analysed together with a heat and power system. ► Heat savings compete with electricity to heat technologies, mainly heat pumps. ► Cost effective heat-savings bring small decrease in health impacts and CO 2 emissions. ► Cost-effectiveness of heat savings depends on the marginal heat generation technology

  4. Determinants of Egyptian Banking Sector Profitability: Time-Series Analysis from 2004-2014

    Directory of Open Access Journals (Sweden)

    Heba Youssef Hashem

    2016-06-01

    Full Text Available Purpose - The purpose of this paper is to examine the determinants of banking sector profitability in Egypt to shed light on the most influential variables that have a significant impact on the performance of this vital sector. Design/methodology/approach - The analysis includes a time series model of quarterly data from 2004 to 2014. The model utilizes Cointegration technique to investigate the long-run relationship between the return on equity as a proxy for bank profitability and several bank-specific variables including liquidity, capital adequacy, and percentage of non-performing loans. In addition, Vector Error Correction Model (VECM is utilized to explore the short-run dynamics of the model and the speed of adjustment to reach the long-run equilibrium. Findings - The main findings of this work show that banking sector profitability is inversely related to capital adequacy, the percentage of loan provisions and the ratio of deposits to total assets. On the other hand, it is positively related to the size of the banking sector which implies that the banking sector exhibits economies of scale. Research limitations/implications - The implications of this work is that it helps reveal the major factors affecting bank performance in the short-run and long-run, and hence provide bank managers and monetary policy makers with beneficial insights on how to enhance bank performance. Since the banking sector represents one of the main engines of financing investment, enhancing the efficiency of this sector would contribute to economic growth and prosperity Originality/value - The Vector error correction model showed that about 4% of the disequilibrium is corrected each quarter to reach the long run equilibrium. In addition, all bank specific variables were found to affect profitability in the long-run only. This study would serve as a base that further work on Egyptian banking sector profitability can build on by incorporating more variables in the

  5. Analysis of alternative strategies for energy conservation in new buildings

    Science.gov (United States)

    Fang, J. M.; Tawil, J.

    1980-12-01

    The policy instruments considered include: greater reliance on market forces; research and development; information, education and demonstration programs; tax incentives and sanctions; mortgage and finance programs; and regulations and standards. The analysis starts with an explanation of the barriers to energy conservation in the residential and commercial sectors. Individual policy instruments are described and evaluated with respect to energy conservation, economic efficiency, equity, political impacts, and implementation and other transitional impacts. Five possible strategies are identified: (1) increased reliance on the market place; (2) energy consumption tax and supply subsidies; (3) Building Energy Performance Standards (BEPS) with no sanctions and no incentives; (4) BEPS with sanctions and incentives (price control); and (5) BEPS with sanctions and incentives (no price controls). A comparative analysis is performed. Elements are proposed for inclusion in a comprehensive strategy for conservation in new buildings.

  6. Modal analysis of a stiffened toroidal shell sector

    International Nuclear Information System (INIS)

    Cerreta, R.; Di Pietro, E.; Pizzuto, A.

    1987-01-01

    This paper presents the results of the modal analysis of a sector of the toroidal vacuum vessel of a new experimental machine for research in the field of controlled thermonuclear fusion (FTU - Frascati Tokamak Upgrade). The vacuum vessel, one of the most critical components of the experimental device, consist of 12 stainless steel toroidal sectors, and it is designed to withstand pulsed electromagnetic loads during operation. Results of the modal analysis of the stiffened toroidal shell sector are compared and discussed with regard to the experimental data. Theoretical eigenvalues and eigenvectors have been predicted by means of ABAQUS finite element code. Experimental analysis has been carried out on a full scale model and natural frequencies have been measured. Satisfactory agreement between experimental and theoretical eigenvalues has been found

  7. TRANSPORTATION BOT SCHEMES FOR PUBLIC AND PRIVATE SECTOR FINANCING SCENARIO ANALYSIS

    Directory of Open Access Journals (Sweden)

    Chien-Hung WEI

    2002-01-01

    Full Text Available Transportation Build-Operate-Transfer financing projects have larger payment risks and failure possibilities than other financing projects, and these factors are essential to financing scenarios. The changes of financing scenarios not only affect private sectors' financing process but the conflict between private sectors and banks. This study broadly reviews relevant factors affecting BOT financing strategies, interviews relevant experts and then uses scenario analysis to design a questionnaire to find out the most important factors affecting BOT financing. The findings of this study are four major factors affecting public and private financing scenarios. In this paper, we also propose some suggestions as possible complements to public and private sector financing strategies.

  8. Decomposition analysis of gas consumption in the residential sector in Ireland

    International Nuclear Information System (INIS)

    Rogan, Fionn; Cahill, Caiman J.; Ó Gallachóir, Brian P.

    2012-01-01

    To-date, decomposition analysis has been widely used at the macro-economic level and for in-depth analyses of the industry and transport sectors; however, its application in the residential sector has been rare. This paper uses the Log-Mean Divisia Index I (LMDI-I) methodology to decompose gas consumption trends in the gas-connected residential sector in Ireland from 1990 to 2008, which despite an increasing number of energy efficiency policies, experienced total final consumption growth of 470%. The analysis decomposes this change in gas consumption into a number of effects, examining the impact over time of market factors such as a growing customer base, varying mix of dwelling types, changing share of vacant dwellings, changing size of new dwellings, the impact of building regulations policy and other factors such as the weather. The analysis finds the most significant effects are changing customer numbers and changing intensity; the analysis also quantifies the impact of building regulations and compares it with other effects such as changing size of new dwellings. By comparing the historical impact on gas consumption of policy factors and non-policy factors, this paper highlights the challenge for policy-makers in achieving overall energy consumption reduction. - Highlights: ► Contribution to a gap in the literature with a residential sector decomposition analysis of gas TFC. ► Activity effect had the largest impact and was cumulatively the best explainer of total TFC change. ► Intensity effect was the second biggest effect with a 19% share of total TFC change. ► In line with rising surface temperatures, the weather effect is declining over time. ► Building regulations are having a diminishing impact but are being negated by larger dwellings.

  9. 308 Building deactivation mission analysis report

    International Nuclear Information System (INIS)

    Lund, D.P.

    1995-01-01

    This report presents the results of the 308 Building (Fuels Development Laboratory) Deactivation Project mission analysis. Hanford systems engineering (SE) procedures call for a mission analysis. The mission analysis is an important first step in the SE process. The functions and requirements to successfully accomplish this mission, the selected alternatives and products will later be defined using the SE process

  10. 309 Building deactivation mission analysis report

    International Nuclear Information System (INIS)

    Lund, D.P.

    1995-01-01

    This report presents the results of the 309 Building (Plutonium Fuels Utilization Program) Deactivation Project mission analysis. Hanford systems engineering (SE) procedures call for a mission analysis. The mission analysis is an important first step in the SE process. The functions and requirements to successfully accomplish this mission, the selected alternatives and products will later be defined using the SE process

  11. Lessons learnt from a sectoral analysis of greenhouse gas mitigation potential in the Balkans

    International Nuclear Information System (INIS)

    Georgopoulou, E.; Mirasgedis, S.; Sarafidis, Y.; Gakis, N.; Hontou, V.; Lalas, D.P.; Steiner, D.; Tuerk, A.; Fruhmann, C.; Pucker, J.

    2015-01-01

    Balkan countries in the process of joining the European Union shall adopt greenhouse gas emissions reduction targets and implement appropriate mitigation policies and measures. This paper presents a simplified methodological framework based on marginal abatement cost curves for estimating the technical and economic mitigation potential at sectoral level (buildings and road transport) in selected Balkan countries. The results of the analysis provide to decision makers useful information regarding the availability of background data, the potential for setting ambitious mitigation targets, and detailed tools for assisting the selection of policies and measures to meet these targets. The analysis performed shows that a significant part of the greenhouse gas emissions abatement potential can be achieved through win–win measures. The incorporation of environmental externalities associated with these interventions, estimated through benefits transfer, further improves the economic performance of these measures, especially in the buildings sector. Moreover, the implementation of these measures is shown to result in positive macroeconomic effects through increases in GDP (gross domestic product) and creation of new jobs. Finally, the rebound effect may restrict the estimated greenhouse gas emission reductions in the buildings of the countries examined due to the low energy performance of the existing building stock. - Highlights: • Analysis of the technical and economic GHG mitigation potential in western Balkans. • Marginal abatement cost curves highlight several win–win interventions. • Incorporation of environmental benefits improves the performance of measures. • Mitigation measures result in significant positive macroeconomic effects. • The investment costs and the rebound effect may influence measures' effectiveness.

  12. Role of Manufacturing Sector and Trade, Hotel, Restaurant Sector In East Java’s Economy: Input Output Analysis

    Directory of Open Access Journals (Sweden)

    Anggari Marya Kresnowati

    2016-11-01

    Full Text Available This study aimed to (1 analyze the relationship the manufacturing sector and the trade, hotel, and restaurant sector with other sectors in East Java, (2 to analyze the economic impact caused the two sectors based on the multiplier effect, (3 and analyze the economic impact caused by these two sectors if there additional investment funds. This study uses data analysis input output 2010 East Java 19x19 aggregation sector.The results indicate that base metals subsector has the highest linkages to other sectors. Based on household income multiplier effect, trade subsector has the greatest multiplier. Employment multiplier in trade and industrial sectors are in medium rank. This is indicates that the labor has been absorbed well in both sectors. The output multiplier effect, subsector non-metal goods, except petroleum and coal has the highest multiplier. The last, according to the analysis of investment injection simulations Input-Output East Java in 2010, subsector other processing industries has a best value added. Overall, the manufacturing sector has a better influence to East Java's economy than trade, hotel, and restaurant sector.

  13. Canister storage building hazard analysis report

    International Nuclear Information System (INIS)

    Krahn, D.E.; Garvin, L.J.

    1997-01-01

    This report describes the methodology used in conducting the Canister Storage Building (CSB) hazard analysis to support the final CSB safety analysis report (SAR) and documents the results. The hazard analysis was performed in accordance with DOE-STD-3009-94, Preparation Guide for US Department of Energy Nonreactor Nuclear Facility Safety Analysis Report, and implements the requirements of DOE Order 5480.23, Nuclear Safety Analysis Report

  14. Customer churn analysis in telecommunication sector

    OpenAIRE

    Şimşek Gürsoy, Umman Tuğba

    2010-01-01

    Data mining is used to analyze mass databases for having meaningful output. One of the most common applications of the data mining, which is called as Churn Analysis is used to predict behavior of customers who are most likely to change provided service, and to create special marketing tools for them. The aim of this paper is to determine customers who want to churn, and to create specific campaigns to them by using a customer data of a major telecommunication firm in Turkey. To determine the...

  15. Innovation in the U.S. building sector: An assessment of patent citations in building energy control technology

    International Nuclear Information System (INIS)

    Altwies, Joy E.; Nemet, Gregory F.

    2013-01-01

    Buildings are crucial to addressing energy problems because they are large consumers of end-use energy, and potential exists to dramatically improve their efficiencies. However, the pace of innovation in buildings is generally characterized as inadequate, despite the implementation of an array of policy instruments aimed at promoting efficiency. The literature on innovation in the building industry provides several explanations including: fragmented decision-making, principal agent problems, inadequate information, and limited learning across heterogeneous projects. We investigate the innovation process for buildings in the U.S. with a case study of patenting in energy management control systems (EMCS) for commercial buildings and programmable thermostats (PT) for residential buildings. Using U.S. patent data, we find that: (1) patenting activity peaked around 1980, subsequently declined, and then increased considerably in the past decade; (2) commercial, rather than residential, buildings account for the recent increase; and (3) building control technologies have benefitted from inventions originating outside the industry, notably from electronics and computers, with a shift toward the latter in recent years. - Highlights: ► We investigate the innovation process for buildings in the U.S. using patents. ► We use commercial and residential building controls technology as a case study. ► Patenting peaked around 1980, declined, and then increased in the past decade. ► Commercial building control patents account for most of the recent increase. ► Inventions in electronics and computers have led to innovation in building controls.

  16. What drives the carbon mitigation in Chinese commercial building sector? Evidence from decomposing an extended Kaya identity.

    Science.gov (United States)

    Ma, Minda; Cai, Weiguang

    2018-09-01

    Energy efficiency in the building sector is expected to contribute >50% to the nationwide carbon mitigation efforts for achieving China's carbon emission peak in 2030, and carbon mitigation in Chinese commercial buildings (CMCCB) is an indicator of this effort. However, the CMCCB assessment has faced the challenge of ineffective and inadequate approaches; therefore, we have followed a different approach. Using the China Database of Building Energy Consumption and Carbon Emissions as our data source, our study is the first to employ the Logarithmic Mean Divisia Index (LMDI) to decompose five driving forces from the Kaya identity of Chinese commercial building carbon emissions (CCBCE) to assess the CMCCB values in 2001-2015. The results of our study indicated that: (1) Only two driving forces (i.e., the reciprocal of GDP per capita of Tertiary Industry in China and the CCBCE intensity) contributed negatively re m i to CCBCE during 2001-2015, and the quantified negative contributions denoted the CMCCB values. Specifically, the CMCCB values in 2001-2005, 2006-2010, and 2011-2015 were 123.96, 252.83, and 249.07 MtCO 2 , respectively. (2) The data quality control involving the CMCCB values proved the reliability of our CMCCB assessment model, and the universal applicability of this model was also confirmed. (3) The substantial achievements of the energy efficiency project in the Chinese commercial building sector were the root cause of the rapidly growing CMCCB. Overall, we believe that our model successfully bridges the research gap of the nationwide CMCCB assessment and that the proposed model is also suitable either at the provincial level or in different building climate zones in China. Meanwhile, a global-level assessment of the carbon mitigation in the commercial building sector is feasible through applying our model. Furthermore, we consider our contribution as constituting significant guidance for developing the building energy efficiency strategy in China in the

  17. Building America House Performance Analysis Procedures

    Energy Technology Data Exchange (ETDEWEB)

    Hendron, R.; Farrar-Nagy, S.; Anderson, R.; Judkoff, R.

    2001-10-29

    As the Building America Program has grown to include a large and diverse cross section of the home building industry, accurate and consistent analysis techniques have become more important to help all program partners as they perform design tradeoffs and calculate energy savings for prototype houses built as part of the program. This document illustrates some of the analysis concepts proven effective and reliable for analyzing the transient energy usage of advanced energy systems as well as entire houses. The analysis procedure described here provides a starting point for calculating energy savings of a prototype house relative to two base cases: builder standard practice and regional standard practice. Also provides building simulation analysis to calculate annual energy savings based on side-by-side short-term field testing of a prototype house.

  18. Statistical Compilation of the ICT Sector and Policy Analysis | CRDI ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Statistical Compilation of the ICT Sector and Policy Analysis. As the presence and influence of information and communication technologies (ICTs) continues to widen and deepen, so too does its impact on economic development. However, much work needs to be done before the linkages between economic development ...

  19. Statistical Compilation of the ICT Sector and Policy Analysis | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Statistical Compilation of the ICT Sector and Policy Analysis. As the presence and influence of information and communication technologies (ICTs) continues to widen and deepen, so too does its impact on economic development. However, much work needs to be done before the linkages between economic development ...

  20. Efficiency in the Community College Sector: Stochastic Frontier Analysis

    Science.gov (United States)

    Agasisti, Tommaso; Belfield, Clive

    2017-01-01

    This paper estimates technical efficiency scores across the community college sector in the United States. Using stochastic frontier analysis and data from the Integrated Postsecondary Education Data System for 2003-2010, we estimate efficiency scores for 950 community colleges and perform a series of sensitivity tests to check for robustness. We…

  1. Vibration Analysis of Annular Sector Plates under Different Boundary Conditions

    Directory of Open Access Journals (Sweden)

    Dongyan Shi

    2014-01-01

    Full Text Available An analytical framework is developed for the vibration analysis of annular sector plates with general elastic restraints along each edge of plates. Regardless of boundary conditions, the displacement solution is invariably expressed as a new form of trigonometric expansion with accelerated convergence. The expansion coefficients are treated as the generalized coordinates and determined using the Rayleigh-Ritz technique. This work allows a capability of modeling annular sector plates under a variety of boundary conditions and changing the boundary conditions as easily as modifying the material properties or dimensions of the plates. Of equal importance, the proposed approach is universally applicable to annular sector plates of any inclusion angles up to 2π. The reliability and accuracy of the current method are adequately validated through numerical examples.

  2. Mutational Analysis of the Rhodopsin Gene in Sector Retinitis Pigmentosa.

    Science.gov (United States)

    Napier, Maria L; Durga, Dash; Wolsley, Clive J; Chamney, Sarah; Alexander, Sharon; Brennan, Rosie; Simpson, David A; Silvestri, Giuliana; Willoughby, Colin E

    2015-01-01

    To determine the role of rhodopsin (RHO) gene mutations in patients with sector retinitis pigmentosa (RP) from Northern Ireland. A case series of sector RP in a tertiary ocular genetics clinic. Four patients with sector RP were recruited from the Royal Victoria Hospital (Belfast, Northern Ireland) and Altnagelvin Hospital (Londonderry, Northern Ireland) following informed consent. The diagnosis of sector RP was based on clinical examination, International Society for Clinical Electrophysiology of Vision (ISCEV) standard electrophysiology, and visual field analysis. DNA was extracted from peripheral blood leucocytes and the coding regions and adjacent flanking intronic sequences of the RHO gene were polymerase chain reaction (PCR) amplified and cycle sequenced. Rhodopsin mutational status. A heterozygous missense mutation in RHO (c.173C > T) resulting in a non-conservative substitution of threonine to methionine (p. Thr58Met) was identified in one patient and was absent from 360 control individuals. This non-conservative substitution (p.Thr58Met) replaces a highly evolutionary conserved polar hydrophilic threonine residue with a non-polar hydrophobic methionine residue at position 58 near the cytoplasmic border of helix A of RHO. The study identified a RHO gene mutation (p.Thr58Met) not previously reported in RP in a patient with sector RP. These findings outline the phenotypic variability associated with RHO mutations. It has been proposed that the regional effects of RHO mutations are likely to result from interplay between mutant alleles and other genetic, epigenetic and environmental factors.

  3. Performance Analysis of Indonesia’s Mining Sector Price Index

    Directory of Open Access Journals (Sweden)

    Hastra Reza Satyatama

    2017-07-01

    Full Text Available Subprime mortage’s crisis in United States 2008 giving effect to the global capital markets especially the stock price index of the mining sector Indonesia. This research analyzes the effect of BI Rate, exchange rate, world gold price, crude oil price, and Dow Jones Industrial Average on the stock price index of the mining sector. This research employs time series monthly data of 2009-2016 with Error Correction Model-Engle Granger (ECM-EG as the method. The analysis showed that the BI rate, exchange rate and world gold price, has a negative and significant effect. World oil prices affect positively but not significant meanwhile the Dow Jones Industrial Average has a positive and significant impact on the stock price index of the mining sector. For investors in the mining sector, should pay attention to the exchange rate of the rupiah and Dow Jones Index significantly in the mining sector of the stock price index.DOI: 10.15408/sjie.v6i2.5395 

  4. Improving building energy efficiency in India: State-level analysis of building energy efficiency policies

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Sha; Tan, Qing; Evans, Meredydd; Kyle, Page; Vu, Linh; Patel, Pralit L.

    2017-11-01

    India is expected to add 40 billion m2 of new buildings till 2050. Buildings are responsible for one third of India’s total energy consumption today and building energy use is expected to continue growing driven by rapid income and population growth. The implementation of the Energy Conservation Building Code (ECBC) is one of the measures to improve building energy efficiency. Using the Global Change Assessment Model, this study assesses growth in the buildings sector and impacts of building energy policies in Gujarat, which would help the state adopt ECBC and expand building energy efficiency programs. Without building energy policies, building energy use in Gujarat would grow by 15 times in commercial buildings and 4 times in urban residential buildings between 2010 and 2050. ECBC improves energy efficiency in commercial buildings and could reduce building electricity use in Gujarat by 20% in 2050, compared to the no policy scenario. Having energy codes for both commercial and residential buildings could result in additional 10% savings in electricity use. To achieve these intended savings, it is critical to build capacity and institution for robust code implementation.

  5. Canister storage building hazard analysis report

    International Nuclear Information System (INIS)

    POWERS, T.B.

    1999-01-01

    This report describes the methodology used in conducting the Canister Storage Building (CSB) hazard analysis to support the CSB final safety analysis report (FSAR) and documents the results. The hazard analysis was performed in accordance with the DOE-STD-3009-94, ''Preparation Guide for US. Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports'', and meets the intent of HNF-PRO-704, ''Hazard and Accident Analysis Process''. This hazard analysis implements the requirements of DOE Order 5480.23, ''Nuclear Safety Analysis Reports''

  6. Building an applied activation analysis centre

    International Nuclear Information System (INIS)

    Bartosek, J.; Kasparec, I.; Masek, J.

    1972-01-01

    Requirements are defined and all available background material is reported and discussed for the building up of a centre of applied activation analysis in Czechoslovakia. A detailed analysis of potential users and the centre's envisaged availability is also presented as part of the submitted study. A brief economic analysis is annexed. The study covers the situation up to the end of 1972. (J.K.)

  7. The Open Source Stochastic Building Simulation Tool SLBM and Its Capabilities to Capture Uncertainty of Policymaking in the U.S. Building Sector

    Energy Technology Data Exchange (ETDEWEB)

    Stadler, Michael; Marnay, Chris; Azevedo, Ines Lima; Komiyama, Ryoichi; Lai, Judy

    2009-05-14

    The increasing concern about climate change as well as the expected direct environmental economic impacts of global warming will put considerable constraints on the US building sector, which consumes roughly 48percent of the total primary energy, making it the biggest single source of CO2 emissions. It is obvious that the battle against climate change can only be won by considering innovative building approaches and consumer behaviors and bringing new, effective low carbon technologies to the building / consumer market. However, the limited time given to mitigate climate change is unforgiving to misled research and / or policy. This is the reason why Lawrence Berkeley National Lab is working on an open source long range Stochastic Lite Building Module (SLBM) to estimate the impact of different policies and consumer behavior on the market penetration of low carbon building technologies. SLBM is designed to be a fast running, user-friendly model that analysts can readily run and modify in its entirety through a visual interface. The tool is fundamentally an engineering-economic model with technology adoption decisions based on cost and energy performance characteristics of competing technologies. It also incorporates consumer preferences and passive building systems as well as interactions between technologies (such as internal heat gains). Furthermore, everything is based on service demand, e.g. a certain temperature or luminous intensity, instead of energy intensities. The core objectives of this paper are to demonstrate the practical approach used, to start a discussion process between relevant stakeholders and to build collaborations.

  8. Energy and Exergy Analysis of the Danish Industry Sector

    DEFF Research Database (Denmark)

    Bühler, Fabian; Nguyen, Tuong-Van; Elmegaard, Brian

    2015-01-01

    % to 56% in 2012. Industries with high-temperature processes, such as the cement and metal production sectors, present the highest exergy efficiencies but the lowest energy ones. The opposite conclusion is drawn for the food, paper and chemical industries. The exergy losses, which indicate the potential......A detailed analysis of the Danish industry is presented in this paper using the energy, exergy and embodied exergy methods. The 22 most energy-intensive process industries, which represent about 80% of the total primary energy use of the industry, were modelled and analysed in details for the years...... is not seen with the embodied exergy efficiency, which remains at around 29% for the Danish industry. This analysis shows that there are still large potentials to recover waste heat in most Danish industrial sectors and thus to increase their efficiencies....

  9. Analysis of the debt burden in Russian economy sectors

    Directory of Open Access Journals (Sweden)

    Svetlana Popova

    2017-12-01

    Full Text Available This paper provides an analysis of the debt burden of Russian companies and raises the issue of debt-level heterogeneity across economic sectors. To identify the causes of this heterogeneity, it estimates a regression model that includes both fundamental explanatory variables of companies and industry fixed effects. The results of the analysis demonstrate that standard variables, such as profitability, company size, asset turnover, and fixed-asset turnover ratio have a strong statistical significance. However, these do not fully explain the variation in the debt levels of companies in different sectors. According to model estimation, there are other industry specific factors that produce an imbalance between fundamental factors and companies’ debt levels. An understanding of the formation process and structure of debt burden in individual industries is extremely important for the financial stability of companies and for an effective monetary policy.

  10. Nordic Analysis of Climate Friendly Buildings

    DEFF Research Database (Denmark)

    Andresen, Inger; Thomsen, Kirsten Engelund; Wahlstrøm, Åsa

    This report summarizes the findings of the work conducted within the project “Nordic Analysis of Climate Friendly Buildings”, financed by the Nordic Council of Ministers. The main goal of the project was to establish a knowledge and decision base for a Nordic innovation program that will promote...... the development and demonstration of low energy and climate friendly buildings. The innovation program should support a development that brings the Nordic countries to an international forefront with respect to business strongholds and market penetration of low energy and climate friendly buildings....

  11. Building America Performance Analysis Procedures: Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Hendron, R.; Anderson, R.; Judkoff, R.; Christensen, C.; Eastment, M.; Norton, P.; Reeves, P.; Hancock, E.

    2004-06-01

    To measure progress toward multi-year Building America research goals, cost and performance trade-offs are evaluated through a series of controlled field and laboratory experiments supported by energy analysis techniques that use test data to''calibrate'' energy simulation models. This report summarizes the guidelines for reporting such analytical results using the Building America Research Benchmark (Version 3.1) in studies that also include consideration of current Regional and Builder Standard Practice. Version 3.1 of the Benchmark is generally consistent with the 1999 Home Energy Rating System (HERS) Reference Home, with additions that allow evaluation of all home energy uses.

  12. Women in development : issues for economic and sector analysis

    OpenAIRE

    Women in Development Division

    1989-01-01

    This paper highlights issues and action plans concerning women in economic and sector analysis and in project design. The paper focuses on the majority of women who are poor. It emphasizes measures to include women in development that contribute to economic performance, poverty reduction, slower population growth, and other broad development objectives. The paper concludes that women already contribute far more economically than is usually recognized. By expanding women's economic choices, ou...

  13. THE ANALYSIS OF THE BEER SECTOR IN ROMANIA

    Directory of Open Access Journals (Sweden)

    OANA DOBRE-BARON

    2012-12-01

    Full Text Available This study aims to analyse a sector of the Romanian economy which is currently among the most sustainable. It is about production and marketing of beer, a product with a long and rich history around the world but also in Romania. The analysis covers a period of seven years and takes into account the dynamic evolution of those market-specific indicators such as: production, consumption, imports, exports, workforce involved, the contribution to the state budget, etc.

  14. Photon activation analysis on building materials

    International Nuclear Information System (INIS)

    Schulze, D.; Heller, W.; Kupsch, H.

    1988-01-01

    With regard to the planned construction of a new microtron, first investigations on raw materials for the aerated concrete production have been done to clear up the possibilities of photon activation analysis (PAA). Irradiations have been partly carried out on linear accelerators with a self-developed moveable activation equipment. PAA results of qualitative and quantitative elemental analysis are described. The detection of chlorine is important for studying the oversalting processes in buildings. (author)

  15. DATA ENVELOPMENT ANALYSIS OF BANKING SECTOR IN BANGLADESH

    Directory of Open Access Journals (Sweden)

    Md. Rashedul Hoque

    2012-05-01

    Full Text Available Banking sector of Bangladesh is flourishing and contributing to its economy. In this aspect measuring efficiency is important. Data Envelopment Analysis technique is used for this purpose. The data are collected from the annual reports of twenty four different banks in Bangladesh. Data Envelopment Analysis is mainly of two types - constant returns to scale and variable returns to scale. Since this study attempts to maximize output, so the output oriented Data Envelopment Analysis is used. The most efficient bank is one that obtains the highest efficiency score.

  16. Need Analysis for Air Conditioners in Public Sector of Surabaya City Government

    Directory of Open Access Journals (Sweden)

    Dwiarti Larasputri

    2017-01-01

    Full Text Available In typical buildings, air conditioners have the biggest percentage in energy consumption among all sectors. It makes a good management for air conditioners is needed and important in order to use the energy efficiently. Having a very hot and humid weather, it gives impact that most of buildings in Surabaya installed air conditioners, including Surabaya City Government office buildings. However, there is no regulation nor guidance how to manage air conditioners in Surabaya City Government, while Surabaya itself has a goal to become a green-eco city. Then, the existing condition of air conditioners usage in Surabaya Government units (SKPDs is evaluated. The evaluation resulted that most of air conditioners were over capacity and not all of them were efficient in energy consumption. Therefore, a need analysis is required to help Surabaya City Government managing its air conditioners better. By applying two different concepts, one is based on the architectural view and another one is based on green building criteria, the existing condition is analyzed and two procedures of need analysis are produced. The procedures can be implemented for two different conditions of office building rooms in Surabaya City Government.

  17. Cost–benefit analysis method for building solutions

    International Nuclear Information System (INIS)

    Araújo, Catarina; Almeida, Manuela; Bragança, Luís; Barbosa, José Amarilio

    2016-01-01

    Highlights: • A new cost–benefit method was developed to compare building solutions. • The method considers energy performance, life cycle costs and investment willingness. • The graphical analysis helps stakeholders to easily compare building solutions. • The method was applied to a case study showing consistency and feasibility. - Abstract: The building sector is responsible for consuming approximately 40% of the final energy in Europe. However, more than 50% of this consumption can be reduced through energy-efficient measures. Our society is facing not only a severe and unprecedented environmental crisis but also an economic crisis of similar magnitude. In light of this, EU has developed legislation promoting the use of the Cost-Optimal (CO) method in order to improve building energy efficiency, in which selection criteria is based on life cycle costs. Nevertheless, studies show that the implementation of energy-efficient solutions is far from ideal. Therefore, it is very important to analyse the reasons for this gap between theory and implementation as well as improve selection methods. This study aims to develop a methodology based on a cost-effectiveness analysis, which can be seen as an improvement to the CO method as it considers the investment willingness of stakeholders in the selection process of energy-efficient solutions. The method uses a simple graphical display in which the stakeholders’ investment willingness is identified as the slope of a reference line, allowing easy selection between building solutions. This method will lead to the selection of more desired – from stakeholders’ point of view – and more energy-efficient solutions than those selected through the CO method.

  18. 327 Building fire hazards analysis implementation plan

    International Nuclear Information System (INIS)

    BARILO, N.F.

    1999-01-01

    In March 1998, the 327 Building Fire Hazards Analysis (FHA) (Reference 1) was approved by the U.S. Department of Energy, Richland Operations Office (DOE-E) for implementation by B and W Hanford Company (BWC). The purpose of the FHA was to identify gaps in compliance with DOE Order 5480.7A (Reference 2) and Richland Operations Office Implementation Directive (RLID) 5480.7 (Reference 3), especially in regard to loss limitation. The FHA identified compliance gaps in five areas and provided nine recommendations (11 items) to bring the 327 Building into compliance. A status is provided for each recommendation in this document. BWHC will use this Implementation Plan to bring the 327 Building and its operation into compliance with DOE Order 5480.7A and IUD 5480.7

  19. The Impact of Productivity Increasing in Indonesian Maritim Sector: General Equilibrium Analysis

    Directory of Open Access Journals (Sweden)

    Widyastutik Widyastutik

    2016-09-01

    Full Text Available The increase in productivity in the maritime sector will realize the maritime sector as a prime mover. This study aims to analyze the impact of the maritime sector productivity improvement on the performance of the economy. This research simulates increased productivity in the maritime sector (consisting of the fisheries, oil, gas sub-sector and marine transport services sector using the Global Trade Analysis Project (GTAP version 8. Simulation analysis showed an increase in productivity in the maritime sector has a positive impact on welfare, real GDP, and trade balance of Indonesia. However, the impact of the increase in productivity is not followed by an increase in output in all sectors. This indicates that if the increase in productivity occurs only in the maritime sector alone without being followed by an increase in productivity in other sectors, the sectoral performance is not optimal.DOI: 10.15408/sjie.v5i2.3403

  20. HR in the Canadian renewable energy sector: HRSDC situational analysis

    International Nuclear Information System (INIS)

    Martin, B.; Ferguson, T.

    2006-01-01

    This paper outlines the human resources needs in the Canadian renewable energy sector. Emerging energies sector has many skills needs, some of which need to be developed. Emerging energy sector includes wind, solar photovoltaic (PV) and bio energy

  1. Analysis of labour risks in the Spanish industrial aerospace sector

    Directory of Open Access Journals (Sweden)

    JUAN LAGUARDIA

    Full Text Available ABSTRACT Labour risk prevention is an activity integrated within Safety and Hygiene at Work in Spain. In 2003, the Electronic Declaration for Accidents at Work, Delt@ (DELTA was introduced. The industrial aerospace sector is subject to various risks. Our objective is to analyse the Spanish Industrial Aerospace Sector (SIAS using the ACSOM methodology to assess its labour risks and to prioritise preventive actions. The SIAS and the Services Subsector (SS were created and the relevant accident rate data were obtained. The ACSOM method was applied through double contrast (deviation and translocation of the SIAS or SS risk polygon with the considered pattern, accidents from all sectors (ACSOM G or the SIAS. A list of risks was obtained, ordered by action phases. In the SIAS vs. ACSOM G analysis, radiation risks were the worst, followed by overstrains. Accidents caused by living beings were also significant in the SS vs. SIAE, which will be able to be used to improve Risk Prevention. Radiation is the most significant risk in the SIAS and the SS. Preventive actions will be primary and secondary. ACSOM has shown itself to be a valid tool for the analysis of labour risks.

  2. Analysis of labour risks in the Spanish industrial aerospace sector.

    Science.gov (United States)

    Laguardia, Juan; Rubio, Emilio; Garcia, Ana; Garcia-Foncillas, Rafael

    2016-01-01

    Labour risk prevention is an activity integrated within Safety and Hygiene at Work in Spain. In 2003, the Electronic Declaration for Accidents at Work, Delt@ (DELTA) was introduced. The industrial aerospace sector is subject to various risks. Our objective is to analyse the Spanish Industrial Aerospace Sector (SIAS) using the ACSOM methodology to assess its labour risks and to prioritise preventive actions. The SIAS and the Services Subsector (SS) were created and the relevant accident rate data were obtained. The ACSOM method was applied through double contrast (deviation and translocation) of the SIAS or SS risk polygon with the considered pattern, accidents from all sectors (ACSOM G) or the SIAS. A list of risks was obtained, ordered by action phases. In the SIAS vs. ACSOM G analysis, radiation risks were the worst, followed by overstrains. Accidents caused by living beings were also significant in the SS vs. SIAE, which will be able to be used to improve Risk Prevention. Radiation is the most significant risk in the SIAS and the SS. Preventive actions will be primary and secondary. ACSOM has shown itself to be a valid tool for the analysis of labour risks.

  3. Climate change, insurance, and the buildings sector: Technological synergisms between adaptation and mitigation

    Energy Technology Data Exchange (ETDEWEB)

    Mills, Evan

    2002-11-01

    Examining the intersection of risk analysis and sustainable energy strategies reveals numerous examples of energy efficient and renewable energy technologies that offer insurance loss-prevention benefits. The growing threat of climate change provides an added motivation for the risk community to better understand this area of opportunity. While analyses of climate change mitigation typically focus on the emissions-reduction characteristics of sustainable energy technologies, less often recognized are a host of synergistic ways in which these technologies also offer adaptation benefits, e.g. making buildings more resilient to natural disasters. While there is already some relevant activity, there remain various barriers to significantly expanding these efforts. Achieving successful integration of sustainable energy considerations with risk-management objectives requires a more proactive orientation, and coordination among diverse actors and industry groups.

  4. Climate change, insurance and the building sector: technological synergisms between adaptation and mitigation

    International Nuclear Information System (INIS)

    Mills, E.

    2003-01-01

    Examining the intersection of risk analysis and sustainable energy strategies reveals numerous examples of energy-efficient and renewable energy technologies that offer insurance loss-prevention benefits. The growing threat of climate change provides an added motivation for the risk community to understand better this area of opportunity. While analyses of climate change mitigation typically focus on the emissions-reduction characteristics of sustainable energy technologies, less often recognised are a host of synergistic ways in which these technologies also offer adaptation benefits, e.g. making buildings more resilient to natural disasters. While there is already some relevant activity, there remain various barriers to expanding these efforts significantly. Achieving successful integration of sustainable energy considerations with risk-management objectives requires a more proactive orientation, and coordination among diverse actors and industry groups. (author)

  5. Methodology for Validating Building Energy Analysis Simulations

    Energy Technology Data Exchange (ETDEWEB)

    Judkoff, R.; Wortman, D.; O' Doherty, B.; Burch, J.

    2008-04-01

    The objective of this report was to develop a validation methodology for building energy analysis simulations, collect high-quality, unambiguous empirical data for validation, and apply the validation methodology to the DOE-2.1, BLAST-2MRT, BLAST-3.0, DEROB-3, DEROB-4, and SUNCAT 2.4 computer programs. This report covers background information, literature survey, validation methodology, comparative studies, analytical verification, empirical validation, comparative evaluation of codes, and conclusions.

  6. Hawaii demand-side management resource assessment. Final report, Reference Volume 1: Building prototype analysis

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-04-01

    This report provides a detailed description of, and the baseline assumptions and simulation results for, the building prototype simulations conducted for the building types designated in the Work Plan for Demand-side Management Assessment of Hawaii`s Demand-Side Resources (HES-4, Phase 2). This report represents the second revision to the initial building prototype description report provided to DBEDT early in the project. Modifications and revisions to the prototypes, based on further calibration efforts and on comments received from DBEDT Staff have been incorporated into this final version. These baseline prototypes form the basis upon which the DSM measure impact estimates and the DSM measure data base were developed for this project. This report presents detailed information for each of the 17 different building prototypes developed for use with the DOE-21E program (23 buildings in total, including resorts and hotels defined separately for each island) to estimate the impact of the building technologies and measures included in this project. The remainder of this section presents some nomenclature and terminology utilized in the reports, tables, and data bases developed from this project to denote building type and vintage. Section 2 contains a more detailed discussion of the data sources, the definition of the residential sector building prototypes, and results of the DOE-2 analysis. Section 3 provides a similar discussion for the commercial sector. The prototype and baseline simulation results are presented in a separate section for each building type. Where possible, comparison of the baseline simulation results with benchmark data from the ENERGY 2020 model or other demand forecasting models specific to Hawaii is included for each building. Appendix A contains a detailed listing of the commercial sector baseline indoor lighting technologies included in the existing and new prototypes by building type.

  7. 324 Building fire hazards analysis implementation plan

    International Nuclear Information System (INIS)

    BARILO, N.F.

    1999-01-01

    In March 1998, the 324 Building Fire Hazards Analysis (FHA) (Reference 1) was approved by the U S. Department of Energy, Richland Operations Office (DOE-RL) for implementation by B and W Hanford Company (BWHC). The purpose of the FHA was to identify gaps in compliance with DOE Order 5480.7A (Reference 2) and Richland Operations Office Implementation Directive (RLID) 5480.7 (Reference 3), especially in regard to loss limitation. The FHA identified compliance gaps in six areas and provided 20 recommendations to bring the 324 Building into compliance with DOE Order 5480 7A. Additionally, one observation was provided. A status is provided for each recommendation in this document. The actions for recommendations associated with the safety related part of the 324 Building and operation of the cells and support areas were evaluated using the Unreviewed Safety Question (USQ) process BWHC will use this Implementation Plan to bring the 324 Building and its operation into compliance with DOE Order 5480 7A and RLID 5480.7

  8. 324 Building fire hazards analysis implementation plan

    International Nuclear Information System (INIS)

    Eggen, C.D.

    1998-01-01

    In March 1998, the 324 Building Fire Hazards Analysis (FHA) (Reference 1) was approved by the US Department of Energy, Richland Operations Office (DOE-RL) for implementation by B and W Hanford Company (BWHC). The purpose of the FHA was to identify gaps in compliance with DOE Order 5480.7A (Reference 2) and Richland Operations Office Implementation Directive (RLID) 5480.7 (Reference 3), especially in regard to loss limitation. The FHA identified compliance gaps in six areas and provided 20 recommendations to bring the 324 Building into compliance with DOE Order 5480.7A. Additionally, one observation was provided. To date, four of the recommendations and the one observation have been completed. Actions identified for seven of the recommendations are currently in progress. Exemption requests will be transmitted to DOE-RL for three of the recommendations. Six of the recommendations are related to future shut down activities of the facility and the corrective actions are not being addressed as part of this plan. The actions for recommendations associated with the safety related part of the 324 Building and operation of the cells and support areas were evaluated using the Unreviewed Safety Question (USQ) process. Major Life Safety Code concerns have been corrected. The status of the recommendations and actions was confirmed during the July 1998 Fire Protection Assessment. BVMC will use this Implementation Plan to bring the 324 Building and its operation into compliance with DOE Order 5480.7A and RLID 5480.7

  9. Analysis of impact of daylight time savings on energy use of buildings in Kuwait

    Energy Technology Data Exchange (ETDEWEB)

    Krarti, Moncef, E-mail: moncef.krarti@colorado.ed [CEAE Department, CB 428, University of Colorado, Boulder, CO 80309 (United States); Hajiah, Ali [Kuwait Institute for Scientific Research, Safat (Kuwait)

    2011-05-15

    In this paper, a detailed simulation-based analysis is conducted to assess the impact of adopting Daylight Saving Time (DST) on the electrical energy use and peak demand in Kuwait. The analysis focused on the impact of DST in the building sector since it represents 90% of electrical energy usage of Kuwait. The simulation results indicate that the adoption of DST has mixed impacts for Kuwait. While the commercial and the governmental sectors may benefit from the DST, the private residences and apartment buildings can see both their annual energy use and peak demand increase slightly by adopting DST. The overall impact of the DST implementation is rather minimal with a slight increase energy use of about 0.07% and a slight reduction in peak demand of 0.14% or about 12 MW based on 2005 electrical peak demand for Kuwait. - Research highlights: {yields} A detailed simulation-based analysis is conducted to assess the impact of adopting Daylight Saving Time (DST) on the electrical energy use and peak demand in Kuwait. {yields} The analysis focused on the impact of DST in the building sector since it represents 90% of electrical energy usage of Kuwait. {yields} It is found that while the commercial and the governmental building sectors may benefit from DST, the private residences and apartment buildings can see both their annual energy use and peak demand increase slightly by adopting DST. {yields} Since the residential sector represents the majority of the electrical load in Kuwait, DST adoption was found to cause slight increase in annual electrical energy use by about 0.07% and a slight reduction in electrical peak electrical demand by about 0.14%.

  10. Analysis of impact of daylight time savings on energy use of buildings in Kuwait

    International Nuclear Information System (INIS)

    Krarti, Moncef; Hajiah, Ali

    2011-01-01

    In this paper, a detailed simulation-based analysis is conducted to assess the impact of adopting Daylight Saving Time (DST) on the electrical energy use and peak demand in Kuwait. The analysis focused on the impact of DST in the building sector since it represents 90% of electrical energy usage of Kuwait. The simulation results indicate that the adoption of DST has mixed impacts for Kuwait. While the commercial and the governmental sectors may benefit from the DST, the private residences and apartment buildings can see both their annual energy use and peak demand increase slightly by adopting DST. The overall impact of the DST implementation is rather minimal with a slight increase energy use of about 0.07% and a slight reduction in peak demand of 0.14% or about 12 MW based on 2005 electrical peak demand for Kuwait. - Research highlights: → A detailed simulation-based analysis is conducted to assess the impact of adopting Daylight Saving Time (DST) on the electrical energy use and peak demand in Kuwait. → The analysis focused on the impact of DST in the building sector since it represents 90% of electrical energy usage of Kuwait. → It is found that while the commercial and the governmental building sectors may benefit from DST, the private residences and apartment buildings can see both their annual energy use and peak demand increase slightly by adopting DST. → Since the residential sector represents the majority of the electrical load in Kuwait, DST adoption was found to cause slight increase in annual electrical energy use by about 0.07% and a slight reduction in electrical peak electrical demand by about 0.14%.

  11. PERFORMANCE ANALYSIS OF AN ENTITY FROM CONSTRUCTION SECTOR USING DASHBOARD

    Directory of Open Access Journals (Sweden)

    SORIN BRICIU

    2015-12-01

    Full Text Available This research paper deals with the analysis of performances of economic entities from the construction sector from Romania. The necessary data for preparation and analysis up through dashboard of the economic entity are provided by managerial accounting through Target Costing method. The way of implementing and observing of stages which are completed in managerial accounting through Target Costing method are also presented in the paper based on the existing literature. For data analysis it was used a questionnaire based on three questions whose results were analyzed and which formed the basis of our entire course of scientific approach. The paper ends with the authors' conclusions about the performance analysis of economic entities in a construction project using dashboard showing the benefits of its long-term decisions.

  12. Challenges for energy efficiency in the buildings sector in the Sao Paulo State, Brazil; Desafios para eficiencia energetica no setor de edificios no estado de Sao Paulo

    Energy Technology Data Exchange (ETDEWEB)

    Matos, Maria Ines; Parente, Virginia [Universidade de Sao Paulo (IEE/USP), SP (Brazil). Inst. de Eletrotecnica e Energia

    2010-07-01

    The consumption of energy in the building sector accounts for more than one third of the total final electricity consumption in Sao Paulo State. Considering that, the development of policy measures aiming at the promotion of energy efficiency in the sector should be encouraged. Analysed data reveals the continuing rise of energy consumption resulting form the high number of new buildings and the rising standards of the population in consequence of economic development. Besides this, the retrofit of old buildings presents a huge potential for energy savings. The article analyses and suggests the use of Building Codes as a suitable policy instrument for the Sao Paulo Sate reality. (author)

  13. Building the Foundations for a Large-Scale, Cross-Sector Collaboration for a Sustainable and Permanent Return to the Lunar Surface

    Science.gov (United States)

    Kapoglou, A.

    2017-10-01

    This presentation will describe how to build the foundations needed for a large scale, cross-industry collaboration to enable a sustainable and permanent return to the Moon based on system leadership, cross-sector partnership, and inclusive business.

  14. Determinants of Trade Credit: A Preliminary Analysis on Construction Sector

    Directory of Open Access Journals (Sweden)

    Nicoleta Barbuta-Misu

    2016-07-01

    Full Text Available This paper introduces a preliminary analysis of the correlations between trade credit and some selected measures of financial performance for a sample of 958 firms acting in the construction sector. The examined period covers 2004-2013. The sample derived from Amadeus database contains firms that have sold and bought on credit. Results showed that larger firms offered and used more credit than counterparties. Firms offered and used in same time credit, but not in same level. Firms with higher return on assets and profit margin used and offered less credit from suppliers, respectively to clients. Moreover, more liquid firms used less trade payables.

  15. Analysis of stock market anomalies: US cross-sectoral comparison

    OpenAIRE

    Jílek, Lukáš

    2012-01-01

    The purpose of this thesis is to analyze anomalies in the US stock market. Special attention is put on Day of the week effect, January effect, and Part of the month effect. We focus on comparison of companies with low and high capitalization. We perform an analysis across 6 major industrial sectors. Then, we discuss the findings with results of past projects and finally, we try to find a speculative investment strategy. We found out that neither Day of the week effect nor January effect do no...

  16. Socio-economic analysis in the transport sector

    DEFF Research Database (Denmark)

    an important element in the political decision process. The analysis provides information about how the society’s resources – from an economic viewpoint – are used in the best possible way, and how costs and benefits are distributed between e.g. the state, the users and the environment. The society does......This compendium is intended to be a tool for students in conducting socio-economic appraisals in the transport sector following the recommendations made by the Danish Manual for Socio-economic Appraisal (DMT, 2003). The appraisal process is in this compendium outlined as a step-by-step process...

  17. In-Depth Analysis of Energy Efficiency Related Factors in Commercial Buildings Using Data Cube and Association Rule Mining

    Directory of Open Access Journals (Sweden)

    Byeongjoon Noh

    2017-11-01

    Full Text Available Significant amounts of energy are consumed in the commercial building sector, resulting in various adverse environmental issues. To reduce energy consumption and improve energy efficiency in commercial buildings, it is necessary to develop effective methods for analyzing building energy use. In this study, we propose a data cube model combined with association rule mining for more flexible and detailed analysis of building energy consumption profiles using the Commercial Buildings Energy Consumption Survey (CBECS dataset, which has accumulated over 6700 existing commercial buildings across the U.S.A. Based on the data cube model, a multidimensional commercial sector building energy analysis was performed based upon on-line analytical processing (OLAP operations to assess the energy efficiency according to building factors with various levels of abstraction. Furthermore, the proposed analysis system provided useful information that represented a set of energy efficient combinations by applying the association rule mining method. We validated the feasibility and applicability of the proposed analysis model by structuring a building energy analysis system and applying it to different building types, weather conditions, composite materials, and heating/cooling systems of the multitude of commercial buildings classified in the CBECS dataset.

  18. Adopting the EU sustainable performance scheme Level(s) in the Danish building sector

    DEFF Research Database (Denmark)

    Kanafani, Kai; Rasmussen, Freja Nygaard; Zimmermann, Regitze Kjær

    2018-01-01

    to life cycle assessment (LCA) requirements within the Level(s) scheme. As a measure for the Danish building sector’s LCA practice, the specifications for LCAbyg, the official Danish building LCA tool, is used. In 2017, the European commission’s Joint Research Centre has launched Level(s) as a vo...

  19. Energy policy instruments and technical change in the residential building sector

    NARCIS (Netherlands)

    Beerepoot, W.M.C.

    2007-01-01

    The passing by the European Parliament of the Energy Performance of Buildings Directive (EPBD) in 2003 obliges all European member states to implement energy regulations for buildings based on the concept of energy performance by the year 2009 ultimately. Given the importance of the development of

  20. On the Effects of Variation of Thermal Conductivity in Buildings in the Italian Construction Sector

    NARCIS (Netherlands)

    Berardi, Umberto; Tronchin, Lamberto; Manfren, Massimiliano; Nastasi, B.

    2018-01-01

    Stationary and dynamic heat and mass transfer analyses of building components are an essential part of energy efficient design of new and retrofitted buildings. Generally, a single constant thermal conductivity value is assumed for each material layer in construction components. However, the

  1. Climate change policies analysis of sectoral changes in Europe

    International Nuclear Information System (INIS)

    Barbier, C.; Baron, R.; Colombier, M.; Boemare, C.

    2004-01-01

    This study addresses the following question, at the core of Europe's climate policy: Beyond the question of the European Union's ability to meet its emissions commitments under the Kyoto Protocol, are sectoral emissions trends displaying structural changes deemed necessary to reduce emissions, and to attain levels that are consistent with the UNFCCC greenhouse gas concentration stabilisation objectives? What lessons can we draw from emissions trends for the EU future climate policy? Greenhouse gas emissions have been stable for the last decade, but mostly due to events and policy developments unrelated to climate policy, and unlikely to be reproduced in other countries: Germany's reunification, substitution from coal to gas in the United Kingdom driven by power market reform. We should not expect changes of such magnitude in the near future. The issue of our future climate policy hence requires a closer look at underlying trends. Industry's direct emissions decreased thanks to constant improvements in energy efficiency and to the substitution of electricity to direct fossil fuel use. In spite of efficiency gains in the residential sector, increasing floor space and level of equipment entail growing energy consumption. Smaller-size households are now spreading to Southern European countries and should be expected in new Member states as well. Turning to the tertiary/services sector, we find that value added and floor space grew significantly over the decade - 35% and 32% respectively in the EU-15. There again, energy efficiency improvements do not compensate for growing floor spaces. Transport's growth, especially freight, has been significant in all countries. The highest rates of traffic growth per unit of gross domestic product are in Spain and Portugal, two countries where rail infrastructure is fairly limited. CO 2 emissions from transport grew by 18% in the EU between 1990 and 2000. Power generation's CO 2 emissions have decreased slightly in spite of strong

  2. Analysis of institutional mechanisms affecting residential and commercial buildings retrofit

    Energy Technology Data Exchange (ETDEWEB)

    1980-09-01

    Barriers to energy conservation in the residential and commercial sectors influence (1) the willingness of building occupants to modify their energy usage habits, and (2) the willingness of building owners/occupants to upgrade the thermal characteristics of the structures within which they live or work and the appliances which they use. The barriers that influence the willingness of building owners/occupants to modify the thermal efficiency characteristics of building structures and heating/cooling systems are discussed. This focus is further narrowed to include only those barriers that impede modifications to existing buildings, i.e., energy conservation retrofit activity. Eight barriers selected for their suitability for Federal action in the residential and commercial sectors and examined are: fuel pricing policies that in the short term do not provide enough incentive to invest in energy conservation; high finance cost; inability to evaluate contractor performance; inability to evaluate retrofit products; lack of well-integrated or one-stop marketing systems (referred to as lack of delivery systems); lack of precise or customized information; lack of sociological/psychological incentives; and use of the first-cost decision criterion (expanded to include short-term payback criterion for the commercial sector). The impacts of these barriers on energy conservation are separately assessed for the residential and commercial sectors.

  3. 327 Building fire hazards analysis implementation plan

    International Nuclear Information System (INIS)

    Eggen, C.D.

    1998-01-01

    In March 1998, the 327 Building Fire Hazards Analysis (FRA) (Reference 1) was approved by the US Department of Energy, Richland Operations Office (DOE-RL) for implementation by B and W Hanford Company (B and WHC). The purpose of the FHA was to identify gaps in compliance with DOE Order 5480.7A (Reference 2) and Richland Operations Office Implementation Directive (RLID) 5480.7 (Reference 3), especially in regard to loss limitation. The FHA identified compliance gaps in five areas and provided nine recommendations (11 items) to bring the 327 Building into compliance. To date, actions for five of the 11 items have been completed. Exemption requests will be transmitted to DOE-RL for two of the items. Corrective actions have been identified for the remaining four items. The completed actions address combustible loading requirements associated with the operation of the cells and support areas. The status of the recommendations and actions was confirmed during the July 1998 Fire Protection Assessment. B and WHC will use this Implementation Plan to bring the 327 Building and its operation into compliance with DOE Order 5480.7A and RLID 5480.7

  4. PRICING STRATEGY USED AS A TOOL FOR BUILDING CUSTOMER SATISFACTION IN THE RETAIL SECTOR

    Directory of Open Access Journals (Sweden)

    Toma Sorin

    2010-12-01

    Full Text Available The purpose of this article is to highlight the importance of pricing strategy in the retail sector and the power of their influence on consumer behavior. Merchants should consider the price generates perceptions and can influence consumer behavior and buying customers. They must also understand how to participate in the price of consumer satisfaction.

  5. Supporting analysis and assessments quality metrics: Utility market sector

    Energy Technology Data Exchange (ETDEWEB)

    Ohi, J. [National Renewable Energy Lab., Golden, CO (United States)

    1996-10-01

    In FY96, NREL was asked to coordinate all analysis tasks so that in FY97 these tasks will be part of an integrated analysis agenda that will begin to define a 5-15 year R&D roadmap and portfolio for the DOE Hydrogen Program. The purpose of the Supporting Analysis and Assessments task at NREL is to provide this coordination and conduct specific analysis tasks. One of these tasks is to prepare the Quality Metrics (QM) for the Program as part of the overall QM effort at DOE/EERE. The Hydrogen Program one of 39 program planning units conducting QM, a process begun in FY94 to assess benefits/costs of DOE/EERE programs. The purpose of QM is to inform decisionmaking during budget formulation process by describing the expected outcomes of programs during the budget request process. QM is expected to establish first step toward merit-based budget formulation and allow DOE/EERE to get {open_quotes}most bang for its (R&D) buck.{close_quotes} In FY96. NREL coordinated a QM team that prepared a preliminary QM for the utility market sector. In the electricity supply sector, the QM analysis shows hydrogen fuel cells capturing 5% (or 22 GW) of the total market of 390 GW of new capacity additions through 2020. Hydrogen consumption in the utility sector increases from 0.009 Quads in 2005 to 0.4 Quads in 2020. Hydrogen fuel cells are projected to displace over 0.6 Quads of primary energy in 2020. In future work, NREL will assess the market for decentralized, on-site generation, develop cost credits for distributed generation benefits (such as deferral of transmission and distribution investments, uninterruptible power service), cost credits for by-products such as heat and potable water, cost credits for environmental benefits (reduction of criteria air pollutants and greenhouse gas emissions), compete different fuel cell technologies against each other for market share, and begin to address economic benefits, especially employment.

  6. 324 building safety analysis report supplement

    International Nuclear Information System (INIS)

    Dodd, A.O.; Wittenbrock, N.G.

    1977-01-01

    Process engineering designs, major equipment and plant facilities to be utilized in commercial nuclear waste preparation and vitrification in the 324 Radiochemical Engineering Building are reviewed with regard to accident potential and consequences. This Safety Analysis Report Supplement compares calculated environmental doses anticipated from the Commercial Nuclear Waste Vitrification Project (CNWVP) routine operations with the average doses from past waste management operations conducted at the Hanford Project and finds them to be significantly less. The calculated CNWVP environmental doses are found to be far below presently applicable ERDA standards and standards proposed by the EPA for nuclear power operations

  7. WASTE HANDLING BUILDING SHIELD WALL ANALYSIS

    International Nuclear Information System (INIS)

    Padula, D.

    2000-01-01

    The scope of this analysis is to estimate the shielding wall, ceiling or equivalent door thicknesses that will be required in the Waste Handling Building to maintain the radiation doses to personnel within acceptable limits. The shielding thickness calculated is the minimum required to meet administrative limits, and not necessarily what will be recommended for the final design. The preliminary evaluations will identify the areas which have the greatest impact on mechanical and facility design concepts. The objective is to provide the design teams with the necessary information to assure an efficient and effective design

  8. Guidelines to perform Life Cycle Analysis of Buildings

    NARCIS (Netherlands)

    Blok, R.; Gervasio, H.; Braganca, L.; Koukkari, H.; Blok, R.

    2008-01-01

    This paper gives a short introduction and attempts to give guidelines on how to perform a life Cycle Analysis (LCA) of a Building. Because a building is a complex system with many subsystems with building elements out of different materials, each fulfilling different functions the LCA of a building

  9. Analysis of Building Envelope Construction in 2003 CBECS

    Energy Technology Data Exchange (ETDEWEB)

    Winiarski, David W.; Halverson, Mark A.; Jiang, Wei

    2007-06-01

    The purpose of this analysis is to determine "typical" building envelope characteristics for buildings built after 1980. We address three envelope components in this paper - roofs, walls, and window area. These typical building envelope characteristics were used in the development of DOE’s Reference Buildings .

  10. The renewable energy sector. A Flemish socio-economic analysis

    International Nuclear Information System (INIS)

    Hutsebaut, E.; De Decker, M.

    2010-10-01

    This study examines the most important characteristics of the renewable energy sector in Flanders, Belgium, based on interviews held with the sector. The addressed parameters include turnover, employment, Financial ratios, the characteristics of the sector such as Legal form, year of establishment, geographical location, and so on. [nl

  11. The Mauritius stock exchange: Sectoral analysis, risk and return ...

    African Journals Online (AJOL)

    Companies listed on the Mauritius Stock Exchange are classified into seven sectors of the economy, namely Banking & Insurance, Industry, Investments, Sugar, Commerce, Leisure & Hotels and Transport. Significant improvements in market capitalisation and turnover are noted in all sectors except the Transport sector.

  12. Vibration Analysis of a Residential Building

    Directory of Open Access Journals (Sweden)

    Sampaio Regina Augusta

    2015-01-01

    Full Text Available The aim of this paper is to present the results of a study regarding vibration problems in a 17 storey residential building during pile driving in its vicinity. The structural design of the building was checked according to the Brazilian standards NBR6118 and NBR6123, and using commercial finite element software. An experimental analysis was also carried out using low frequency piezo-accelerometers attached to the building structure. Structure vibrations were recorded under ambient conditions. Four monitoring tests were performed on different days. The objective of the first monitoring test was an experimental modal analysis. To obtain de modal parameters, data was processed in the commercial software ARTEMIS employing two methods: the Stochastic Subspace Identification and the Frequency Domain Decomposition. Human comfort was investigated considering the International Standard ISO 2631. The Portuguese standard, NP2074, was also used as a reference, since it aims to limit the adverse effects of vibrations in structures caused by pile driving in the vicinity of the structure. The carried out experimental tests have shown that, according to ISO2301, the measure vibration levels are above the acceptance limits. However, velocity peaks are below the limits established by NP2074. It was concluded that, although the structure has adequate capacity to resist internal forces according to normative criteria, it has low horizontal stiffness, which could be verified by observing the vibration frequencies and mode shapes obtained with the finite element models, and its similarity with the experimental results. Thus, the analyses indicate the occurrence of discomfort by the residents.

  13. Environmental management in sugar-energy sector: a comparative analysis

    Directory of Open Access Journals (Sweden)

    Andréia Marize Rodrigues

    2014-11-01

    Full Text Available With the rise of the environmental variable in the business environment, companies started to give greater attention to strategies and practices focused on the rational use of natural resources and minimize the environmental impacts of their business operations. Many productive sectors stood out in the reflections on production and the environment, as is the case of the sugar energy industry, which constitutes a sector with a highly demanding industrial activity of natural resources, whether as sources of inputs as depositories of waste production. Thus, the aim of this paper is a comparative analysis of environmental practices of two sugar energy plants, both from the point of view of their operational strategy and regarding the suitability of the disposal of waste generated by the industrial area. It was concluded that, although many practices adopted by businesses are analogous, one of the studied plants have distinctive environmental performance, because of the increased attention given to the implementation of environmental practices and especially the inclusion of the environmental variable in their strategies.

  14. A post-Kyoto analysis of the Greek electric sector

    International Nuclear Information System (INIS)

    Dagoumas, A.S.; Kalaitzakis, E.; Papagiannis, G.K.; Dokopoulos, P.S.

    2007-01-01

    The obligations resulting from the Kyoto Protocol (KP) are implemented by many participants, e.g. Greece, by a combination of two methods: (a) application of regional measures which restrict CO 2 emissions and (b) procurement of green certificates e.g. in a Climate Exchange Market (CEX). Therefore, the cost for compliance with the KP depends on the extent each method is used and also on the traded values in the CEX. The energy policy and planning to be considered are long-term items and now extension of the KP to a post-KP is discussed which reaches year 2020. In Greece, the electricity sector is with a weighted CO 2 contribution of 73%, the dominantly emission sector. The paper analyzes the cost and other merits of different scenarios for the expansion of electrical power system in Greece. For different scenarios, the total cost of the electrical power system expansion is calculated as a function of the price of emission certificates. It has been shown that there is a price of 27.5 Euro /tCO 2 , above which specific mitigation measures may lead to cost optimum solutions. A sensitivity analysis is also presented concerning the variation of key parameters like the participation in the system expansion of new supercritical coal units, the price evolution of natural gas, the RES usage rate and the discount rates of the expansion investments. Results may be of interest for a decision on the cost optimum electrical power system expansion

  15. Cost benefit analysis of policy measures in the transport sector

    Energy Technology Data Exchange (ETDEWEB)

    Buus Kristensen, N [COWI (Denmark)

    1996-12-01

    The Government has introduced a national target for the reduction of CO{sub 2} emissions from the transport sector, which aims to stabilize emissions at the 1988 level, by the year 2005. This target was first formalized in the Government`s 1990 transport action plan, and later repeated in `Traffic 2005`, published in December 1993. The latter document also makes reference to six strategies, which the Government proposed in order to attain the national target. The majority of the transport policy measures will impact on CO{sub 2} emissions from the sector, even if they are targeted at different objectives, e.g. road safety, air pollution, time savings, etc. A long-list of potential measures, which might be adopted with the primary purpose is to reduce CO{sub 2} emissions, has been identified from the six overall strategies. The measures identified have been subjected to detailed analyses, to ascertain all the potential impacts. The main emphasis has been on clarifying the potential efficacy of each of the measures in reducing CO{sub 2} emissions, and the social costs in a wide sense. The analysis assumes that each policy measure is implemented separately. A methodology is developed that presents the respective consequences in commensurate terms. Similar calculations are undertaken for two different combinations of policy measures. (EG)

  16. Analysis of the Portuguese building regulation system

    OpenAIRE

    Costa Branco De Oliveira Pedro, J.A.; Meijer, F.M.; Visscher, H.J.

    2008-01-01

    The Portuguese building regulation system has undergone significant changes in the last 20 years. Almost all building regulations presently in force were approved during that period. Some of those building regulations resulted from the transposition of European Directives. Other building regulations were changed due to improvements in the scientific knowledge. The changes in the building control system were mainly driven by an adaptation to more pressing circumstances of practice. The lack...

  17. Radiobiological assessment of usability of the fly ash from coal-fired power plants in building sector in Turkey

    International Nuclear Information System (INIS)

    2009-01-01

    In this study, the specific activities of 2 26Ra, 2 32Th and 4 0K radionuclide in the samples of cement and concrete added fly ash (FA) used building sector were measured by using gamma spectrometer with HPGe detector. In order to assess the usability of the samples of the cement and concrete added FA in building sector and the FA samples obtained as a by-product from coal-burning thermic power plants in Turkey in geotechnical applications from radiological point of view, the radium equivalent activity (Ra e q), the activity concentration index (Iγ), the alpha index (Iα), the absorbed gamma dose rates (D I O, D D O) and the corresponding effective dose rates (H I O, H D O) caused from the external exposure in indoor and outdoor were calculated and compared with the limit value or the criterion. The results showed that the mean values of the Ra e q, Iγ (except the mean value calculated for the concrete added with 30% Kangal FA), Iα (except the mean values calculated for the cement added with 30-35%) and the indoor effective dose rate (except the mean values calculated for the cement added with 30-35% and the concrete added with 30% Kangal FA) were lower than or close to the limit value or the criterion recommended for the safe use of construction materials. (Includes 12 figures and 12 tables)

  18. Building models of gauge-mediated supersymmetry breaking without a messenger sector

    International Nuclear Information System (INIS)

    Arkani-Hamed, N.; Murayama, H.; March-Russell, J.

    1998-01-01

    We propose a general scheme for constructing models in which the Standard Model (SM) gauge interactions are the mediators of supersymmetry breaking to the fields in the supersymmetric SM, but where the SM gauge groups couple directly to the sector which breaks supersymmetry dynamically. Despite the direct coupling, the models preserve perturbative unification of the SM gauge coupling constants. Furthermore, the supergravity contributions to the squark and slepton masses can be naturally small, typically being much less than 1% of the gauge-mediated (GM) contributions. Both of these goals can be achieved without need of a fine-tuning or a very small coupling constant. This scheme requires run-away directions at the renormalizable level which are only lifted by non-renormalizable terms in the superpotential. To study the proposed scheme in practice, we develop a modified class of models based on SU(N) x SU(N-1) which allows us to gauge an SU(N-2) global symmetry. However, we point out a new problem which can exist in models where the dynamical supersymmetry breaking sector and the ordinary sector are directly coupled - the two-loop renormalization group has contributions which can induce negative (mass) 2 for the squarks and sleptons. We clarify the origin of the problem and argue that it is likely to be surmountable. We give a recipe for a successful model. (orig.)

  19. Building and household X-factors and energy consumption at the residential sector

    International Nuclear Information System (INIS)

    Estiri, Hossein

    2014-01-01

    Energy use in residential buildings is one of the major sources of greenhouse gas emission production from cities. Using microdata from the 2009 Residential Energy Consumption Survey (RECS), this study applies structural equation modeling to analyze the direct, indirect, and total impacts of household and building characteristics on residential energy consumption. Results demonstrate that the direct impact of household characteristics on residential energy consumption is significantly smaller than the corresponding impact from the buildings. However, accounting for the indirect impact of household characteristics on energy consumption, through choice of the housing unit characteristics, the total impact of households on energy consumption is just slightly smaller than that of buildings. Outcomes of this paper call for smart policies to incorporate housing choice processes in managing residential energy consumption. - Highlights: • Households indirectly influence residential energy use through housing choice. • Households' total impact on energy use is comparable to that of buildings. • Understanding households' indirect impact will enhance residential energy policy. • Smart energy policies are needed to target both direct and indirect effects

  20. Models for residential- and commercial-sector energy-conservation analysis: applications, limitations, and future potential. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Cole, Henry E.; Fullen, Robert E.

    1980-09-01

    This report reviews four of the major models used by the Department of Energy (DOE) for energy conservation analyses in the residential- and commercial-building sectors. The objective is to provide a critical analysis of how these models can serve as tools for DOE and its Conservation Policy Office in evaluating and quantifying their policy and program requirements. For this, the study brings together information on the models' analytical structure and their strengths and limitations in policy applications these are then employed to assess the most-effective role for each model in addressing future issues of buildings energy-conservation policy and analysis. The four models covered are: Oak Ridge Residential Energy Model; Micro Analysis of Transfers to Households/Comprehensive Human Resources Data System (MATH/CHRDS) Model; Oak Ridge Commercial Energy Model; and Brookhaven Buildings Energy Conservation Optimization Model (BECOM).

  1. Greenhouse gases emission assessment in residential sector through buildings simulations and operation optimization

    International Nuclear Information System (INIS)

    Stojiljković, Mirko M.; Ignjatović, Marko G.; Vučković, Goran D.

    2015-01-01

    Buildings use a significant amount of primary energy and largely contribute to greenhouse gases emission. Cost optimality and cost effectiveness, including cost-optimal operation, are important for the adoption of energy efficient and environmentally friendly technologies. The long-term assessment of buildings-related greenhouse gases emission might take into account cost-optimal operation of their energy systems. This is often not the case in the literature. Long-term operation optimization problems are often of large scale and computationally intensive and time consuming. This paper formulates a bottom-up methodology relying on an efficient, but precise operation optimization approach, applicable to long-term problems and use with buildings simulations. We suggest moving-horizon short-term optimization to determine near-optimal operation modes and show that this approach, applied to flexible energy systems without seasonal storage, have satisfactory efficiency and accuracy compared with solving problem for an entire year. We also confirm it as a valuable pre-solve technique. Approach applicability and the importance of energy systems optimization are illustrated with a case study considering buildings envelope improvements and cogeneration and heat storage implementation in an urban residential settlement. EnergyPlus is used for buildings simulations while mixed integer linear programming optimization problems are constructed and solved using the custom-built software and the branch-and-cut solver Gurobi Optimizer. - Highlights: • Bottom-up approach for greenhouse gases emission assessment is presented. • Short-term moving-horizon optimization is used to define operation regimes. • Operation optimization and buildings simulations are connected with modeling tool. • Illustrated optimization method performed efficiently and gave accurate results.

  2. Neutron activation analysis of some building materials

    International Nuclear Information System (INIS)

    Salagean, M.; Pantelica, A.; Georgescu, I.I.; Muntean, M.I.

    1999-01-01

    Over the past decade, indoor air quality has become a growing environmental problem. A careful selection of building materials concerning the acceptance of chemical and radioactive emissions is one of the ways to ensure high indoor air quality. Nowadays, it is a tendency to obtain new building materials having good isolation properties and low density by using the cheap and practically inexhaustible solid waste products like furnace slag, fly coal ash and phosphogypsum, without combustion. The Romanian furnace slag containing generally, above 45 % CaO can be used alone or mixed with fly ash to obtain some binder materials with mechanical resistance comparable to the Portland cement. Different additives such as CaO+Na 2 SO 4 or CaCl 2 +Na 2 SO 4 are used as activating admixtures. Concentrations of As, Au, Ba, Br, Ca, Ce, Co, Cr, Cs, Eu, Fe, Hf, K, La, Lu, Mo, Na, Nd, Rb, Sb, Sc, Sr, Ta, Tb, Th, U, Yb, W and Zn in seven Romanian building materials were determined by Instrumental Neutron Activation Analysis (INAA) method at WWR-S Reactor of IFIN-HH, Bucharest. Raw material used in the cement production (∼75 % limestone, ∼25 % clay), cement samples from three different factories, furnace slag, phosphogypsum, and a type of brick compacted from furnace slag, fly coal ash, phosphogypsum, lime and cement have been analyzed. The fly coal ashes from five Romanian coal-fired power plants, resulting by the combustion of the xyloide brown coals, lignite and bituminous-subbituminous coals were previously analyzed. It was found that the content of the toxic microelements like As, Co, Cr, Th, U, Zn in the ceramic blocks is especially due to the slag and fly ash, the main components. This content depends on the particular sources of mineral raw materials. The presence of U, Th and K in slag is mainly correlated with the limestone and dolomite as used in the metallurgical process. (authors)

  3. 76 FR 64931 - Building Energy Codes Cost Analysis

    Science.gov (United States)

    2011-10-19

    ...-0046] Building Energy Codes Cost Analysis AGENCY: Office of Energy Efficiency and Renewable Energy... reopening of the time period for submitting comments on the request for information on Building Energy Codes... the request for information on Building Energy Code Cost Analysis and provide docket number EERE-2011...

  4. Canister storage building design basis accident analysis documentation

    International Nuclear Information System (INIS)

    KOPELIC, S.D.

    1999-01-01

    This document provides the detailed accident analysis to support HNF-3553, Spent Nuclear Fuel Project Final Safety Analysis Report, Annex A, ''Canister Storage Building Final Safety Analysis Report.'' All assumptions, parameters, and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the Canister Storage Building Final Safety Analysis Report

  5. Canister storage building design basis accident analysis documentation

    Energy Technology Data Exchange (ETDEWEB)

    KOPELIC, S.D.

    1999-02-25

    This document provides the detailed accident analysis to support HNF-3553, Spent Nuclear Fuel Project Final Safety Analysis Report, Annex A, ''Canister Storage Building Final Safety Analysis Report.'' All assumptions, parameters, and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the Canister Storage Building Final Safety Analysis Report.

  6. Canister Storage Building (CSB) Design Basis Accident Analysis Documentation

    International Nuclear Information System (INIS)

    CROWE, R.D.

    1999-01-01

    This document provides the detailed accident analysis to support ''HNF-3553, Spent Nuclear Fuel Project Final Safety, Analysis Report, Annex A,'' ''Canister Storage Building Final Safety Analysis Report.'' All assumptions, parameters, and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the Canister Storage Building Final Safety Analysis Report

  7. Canister Storage Building (CSB) Design Basis Accident Analysis Documentation

    International Nuclear Information System (INIS)

    CROWE, R.D.; PIEPHO, M.G.

    2000-01-01

    This document provided the detailed accident analysis to support HNF-3553, Spent Nuclear Fuel Project Final Safety Analysis Report, Annex A, ''Canister Storage Building Final Safety Analysis Report''. All assumptions, parameters, and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the Canister Storage Building Final Safety Analysis Report

  8. COMPARATIVE ANALYSIS OF ECONOMIC AND SOCIAL EFFICIENCY. CUSTOMIZE ON HEALTHCARE SECTOR

    OpenAIRE

    CLAUDIU CICEA

    2011-01-01

    Efficiency in health service sector is very important because the health sector is a major consumer of resources (especially financial). In this paper the author aims to analyze the efficiency in a social sector (healthcare system) based on cost-benefit analysis.

  9. The Effects of Domestic Macroeconomic Determinants on Stock Returns: A Sector Level Analysis

    Directory of Open Access Journals (Sweden)

    Şerife Özlen

    2014-08-01

    Full Text Available Investment analysis should be carefully performed in stock markets. Therefore, firms take necessary actions according to stock market behavior and macroeconomic variables. Therefore, the predictability of stock market determinants becomes important. This study aims to identify the effects of selected macroeconomic factors (interest rate, exchange rates, inflation-consumer price index, current account deficit, unemployment rates and sector indices on stock returns of selected 48 companies in 11 different sectors of Istanbul Stock Exchange including electric, food, communication, paper, chemistry, metal-main, metal-product, stone, textile, commerce and transportation sectors. The study employs ARDL approach on the period between the second month of 2005 and the second month of 2012 including 85 monthly observations. According to the results, Sector Indices are found to be quite influential through the selected sectors. Exchanges rate is also significantly influential on almost all the sectors except Communication and Textile sectors. The impacts of Interest Rate, Inflation Rate, Current Account Deficit, and Unemployment Rate are various through the selected sectors. Moreover, the influence of Istanbul Stock Exchange Market on the stock returns of considered companies is significantly clear through the sectors except six companies (two companies from Paper sector, one company from Metal-Main sector, two companies from Stone sector and one company from Textile sector out of 48 companies. Since it includes a wide range of companies and sectors, this study is expected to be useful for all policy makers and investment decisions.

  10. The effect of building regulations and energy conservation measures in domestic sector on national energy consumption

    International Nuclear Information System (INIS)

    Samo, S.R.; Akhund, M.A.; Brohi, K.M.

    2004-01-01

    In England, housing accounts for some 30% of total fuel consumption and a similar proportion of energy-related carbon dioxide (CO/sub 2/) emission. A study has been conducted to analyse the effect of the legislations and UK thermal building regulations on national energy consumption in housing. This research paper presents data on the percentage of dwelling stock, the energy consumption, energy cost and carbon dioxide (CO/sub 2/) emission in different types of dwellings, which comply different building regulations from 1965 to 1995. It was found that. 66% of the dwelling stock, which comply the building Regulations before 1965, consumes 73% of total energy used in housing. This dwelling stock is also responsible for 75% of carbon dioxide (CO/sub 2/) emission. Whereas currently only 4% of the dwelling stock complies the latest building regulations 1995 which consume 2 % of energy and produce a similar percentage of carbon dioxide (CO/sub 2/) emission in housing. Since the large portion of the dwelling stock is comprised of old dwellings, therefore the greatest potential for energy conservation measures can be found in improving these dwellings instead of constructing new dwellings. (author)

  11. On the Effects of Variation of Thermal Conductivity in Buildings in the Italian Construction Sector

    Directory of Open Access Journals (Sweden)

    Umberto Berardi

    2018-04-01

    Full Text Available Stationary and dynamic heat and mass transfer analyses of building components are an essential part of energy efficient design of new and retrofitted buildings. Generally, a single constant thermal conductivity value is assumed for each material layer in construction components. However, the variability of thermal conductivity may depend on many factors; temperature and moisture content are among the most relevant ones. A linear temperature dependence of thermal conductivity has been found experimentally for materials made of inorganic fibers such as rockwool or fiberglass, showing lower thermal conductivities at lower temperatures. On the contrary, a nonlinear temperature dependence has been found for foamed insulation materials like polyisocyanurate, with a significant deviation from linear behavior. For this reason, thermal conductivity assumptions used in thermal calculations of construction components and in whole-building performance simulations have to be critically questioned. This study aims to evaluate how temperature affects thermal conductivity of materials in building components such as exterior walls and flat roofs in different climate conditions. Therefore, experimental conductivities measured for four common insulation materials have been used as a basis to simulate the behavior of typical construction components in three different Italian climate conditions, corresponding to the cities of Turin, Rome, and Palermo.

  12. The Leading Economic Sectors Building Comparative and Competitive Advantages in Romania's Foreign Trade

    Directory of Open Access Journals (Sweden)

    Adriana Giurgiu

    2008-05-01

    Full Text Available For now on, as a member state of the EU, Romania and the Romanian commercial operators should maximize the foreign trade’s opportunities given by the rich portfolio of free trade agreements of the European Union and try to reorient our exports towards countries where the products of which the structure of our Romanian exports is consisted of hold a comparative and competitive advantage, in order to reduce the Romanian long-term trade balance deficit. Therefore, this paper focuses on finding out the leading sectors with high potential to maintain and consolidate the comparative and competitive advantages of the Romania’s foreign trade.

  13. Fire risk analysis in ITER tritium building

    International Nuclear Information System (INIS)

    Lignini, Franck; Uzan-Elbez, Joelle; Girard, Jean-Philippe; Porfiri, Maria Teresa; Rodriguez-Rodrigo, Lina

    2005-01-01

    Events, such as fire, have been considered in ITER documentation of low probability and a general approach has been defined in [Technical basis for the ITER final design, EDA Documentation Series I, No. 22, IAEA, Vienna, 2001] to be developed later for the ITER specific site. It was said that 'these hazards will be treated according to the industrial safety regulations and practices of the host country'. In the framework of studies for the European ITER site in Cadarache, an assessment of fire hazard has been done in order to ensure compliance with French safety requirements. In this report, a summary of existing laws is presented and an example of the deterministic approach to be followed for the preliminary safety report (PSR) is given on the analysis of tritium building design

  14. Lack of Energy Efficiency Legislation in the Malaysian Building Sector Contributes to Malaysia’s Growing GHG Emissions

    Directory of Open Access Journals (Sweden)

    Zaid Suzaini M.

    2014-01-01

    Full Text Available Malaysia’s carbon emissions grew by +235.6% from 1990 to 2005, largely due to an increase in national energy demand of 210.7% from 1990 to 2004. This unparalleled carbon emission growth, along with business-as-usual (BAU practices will put Malaysia at high risk for carbon lock-in and a very unsustainable path of development. Malaysia clearly needs to make significant and urgent changes in its policy, economy, industries and lifestyle in order to reduce its climate change impacts. In 2010 Malaysia announced a voluntary commitment to reduce 40% of its greenhouse gases (GHG emissions by 2020 (from 1990 levels. Without emissions mitigation and conservation policies, Malaysia is unlikely to meet its emissions reduction targets. Presently, Malaysia has no energy efficiency legislation in its growing building sector. This paper reviews existing building policies and energy efficiency measures in Malaysia and highlights the need to implement mandatory energy efficiency building codes in reducing the sector’s impact on climate change.

  15. Building Capacity to Use NASA Earth Observations in the Water Resource Sector

    Science.gov (United States)

    Childs-Gleason, L. M.; Ross, K. W.; Crepps, G.; Clayton, A.; Ruiz, M. L.; Rogers, L.; Allsbrook, K. N.

    2017-12-01

    The NASA DEVELOP National Program builds capacity to use and apply NASA Earth observations to address environmental concerns around the globe. The DEVELOP model builds capacity in both participants (students, recent graduates, and early and transitioning career professionals) who conduct the projects and partners (decision and policy makers) who are recipients of project methodologies and results. Projects focus on a spectrum of thematic topics, including water resource management which made up 30% of the DEVELOP FY2017 portfolio. During this period, DEVELOP conducted water-focused feasibility studies in collaboration with 22 partners across 13 U.S. states and five countries. This presentation will provide an overview of needs identified, DEVELOP's response, data sources, challenges, and lessons learned.

  16. Building Competitive Advantage Through Open Innovation : A case study in the financial technology sector

    OpenAIRE

    Jonsson Holm, Erik; Andersson, Felix

    2018-01-01

    The modern financial industry includes fast-changing technology, new regulations, and markets where companies at times find themselves at disadvantage. This study focuses on how organizations can build competitive advantage, particularly by drawing on the open innovation concept. We conceptualize its relationship to competitive advantage as a strategy of using and developing dynamic capabilities in business ecosystems. This view is empirically analysed through qualitative data from four organ...

  17. Security Sector Reform: A Case Study Approach to Transition and Capacity Building

    Science.gov (United States)

    2010-01-01

    the heart of the Serbian empire, under the Nemanjic dynasty. The period sees the building of many Serbian Orthodox churches and monasteries. 27...Serbia regains control of Kosovo from the Turks, recognized by the 1913 Treaty of London. 1918 . Kosovo becomes part of the Kingdom of Serbia. 1941...on the UNMIK and OSCE missions, approximately 499 Formed Police Units (FPU) from Pakistan, Romania , Poland, and the Ukraine were a part of the

  18. Cloud Computing and Internet of Things Concepts Applied on Buildings Data Analysis

    Directory of Open Access Journals (Sweden)

    Hebean Florin-Adrian

    2017-12-01

    Full Text Available Used and developed initially for the IT industry, the Cloud computing and Internet of Things concepts are found at this moment in a lot of sectors of activity, building industry being one of them. These are defined like a global computing, monitoring and analyze network, which is composed of hardware and software resources, with the feature of allocating and dynamically relocating the shared resources, in accordance with user requirements. Data analysis and process optimization techniques based on these new concepts are used increasingly more in the buildings industry area, especially for an optimal operations of the buildings installations and also for increasing occupants comfort. The multitude of building data taken from HVAC sensor, from automation and control systems and from the other systems connected to the network are optimally managed by these new analysis techniques. Through analysis techniques can be identified and manage the issues the arise in operation of building installations like critical alarms, nonfunctional equipment, issues regarding the occupants comfort, for example the upper and lower temperature deviation to the set point and other issues related to equipment maintenance. In this study, a new approach regarding building control is presented and also a generalized methodology for applying data analysis to building services data is described. This methodology is then demonstrated using two case studies.

  19. Private participation in infrastructure: A risk analysis of long-term contracts in power sector

    Science.gov (United States)

    Ceran, Nisangul

    The objective of this dissertation is to assess whether the private participation in energy sector through long term contracting, such as Build-Operate-Transfer (BOT) type investments, is an efficient way of promoting efficiency in the economy. To this end; the theoretical literature on the issue is discussed, the experience of several developing countries are examined, and a BOT project, which is undertaken by the Enron company in Turkey, has been studied in depth as a case study. Different risk analysis techniques, including sensitivity and probabilistic risk analysis with the Monte Carlo Simulation (MCS) method have been applied to assess the financial feasibility and risks of the case study project, and to shed light on the level of rent-seeking in the BOT agreements. Although data on rent seeking and corruption is difficult to obtain, the analysis of case study investment using the sensitivity and MCS method provided some information that can be used in assessing the level of rent-seeking in BOT projects. The risk analysis enabled to test the sustainability of the long-term BOT contracts through the analysis of projects financial feasibility with and without the government guarantees in the project. The approach of testing the sustainability of the project under different scenarios is helpful to understand the potential costs and contingent liabilities for the government and project's impact on a country's overall economy. The results of the risk analysis made by the MCS method for the BOT project used as the case study strongly suggest that, the BOT projects does not serve to the interest of the society and transfers substantial amount of public money to the private companies, implying severe governance problems. It is found that not only government but also private sector may be reluctant about full privatization of infrastructure due to several factors such as involvement of large sunk costs, very long time period for returns to be received, political and

  20. COMPARATIVE ANALYSIS OF INNOVATION ASPECT EVIDENCE IN CONSTRUCTION AND MULTI-SECTOR COMPANIES

    OpenAIRE

    Ricardo Floriani; Ilse Maria Beuren; Nelson Hein

    2010-01-01

    The goal of this study is to make a comparative analysis of innovation aspect evidence among construction and multi-sector companies. Descriptive research was done through a content analysis of administration reports from 2005 to 2007. From the researched material, 14 aspects of innovations were extracted, which offer the basis to the content analysis. Two non-probability samples were developed, the first consisting of 22 multi-sector businesses, within 18 economic sectors, which comprises th...

  1. Energy and exergy analysis at the utility and commercial sectors of Malaysia

    International Nuclear Information System (INIS)

    Saidur, R.; Sattar, M.A.; Masjuki, H.H.; Abdessalam, H.; Shahruan, B.S.

    2007-01-01

    In this paper, sectoral energy and exergy analysis model is applied to the utility and commercial sectors of Malaysia by considering the energy and exergy flows from 1990 to 2003. The energy and exergy efficiencies are determined for the sub-sectors and devices used in these two sectors. It has been found the hydroelectric power plant sub-sector is more energy and exergy efficient compared to the thermal power plant sub-sector. The energy and exergy efficiencies of utility and commercial sectors of Malaysia are compared with a few other countries around the world as well. The utility and commercial sectors of Malaysia are found to be more efficient than that of Thailand, Brunei, China, and Vietnam in 1999

  2. Futures Business Models for an IoT Enabled Healthcare Sector: A Causal Layered Analysis Perspective

    Directory of Open Access Journals (Sweden)

    Julius Francis Gomes

    2016-12-01

    Full Text Available Purpose: To facilitate futures business research by proposing a novel way to combine business models as a conceptual tool with futures research techniques. Design: A futures perspective is adopted to foresight business models of the Internet of Things (IoT enabled healthcare sector by using business models as a futures business research tool. In doing so, business models is coupled with one of the most prominent foresight methodologies, Causal Layered Analysis (CLA. Qualitative analysis provides deeper understanding of the phenomenon through the layers of CLA; litany, social causes, worldview and myth. Findings: It is di cult to predict the far future for a technology oriented sector like healthcare. This paper presents three scenarios for short-, medium- and long-term future. Based on these scenarios we also present a set of business model elements for different future time frames. This paper shows a way to combine business models with CLA, a foresight methodology; in order to apply business models in futures business research. Besides offering early results for futures business research, this study proposes a conceptual space to work with individual business models for managerial stakeholders. Originality / Value: Much research on business models has offered conceptualization of the phenomenon, innovation through business model and transformation of business models. However, existing literature does not o er much on using business model as a futures research tool. Enabled by futures thinking, we collected key business model elements and building blocks for the futures market and ana- lyzed them through the CLA framework.

  3. Vision-based building energy diagnostics and retrofit analysis using 3D thermography and building information modeling

    Science.gov (United States)

    Ham, Youngjib

    The emerging energy crisis in the building sector and the legislative measures on improving energy efficiency are steering the construction industry towards adopting new energy efficient design concepts and construction methods that decrease the overall energy loads. However, the problems of energy efficiency are not only limited to the design and construction of new buildings. Today, a significant amount of input energy in existing buildings is still being wasted during the operational phase. One primary source of the energy waste is attributed to unnecessary heat flows through building envelopes during hot and cold seasons. This inefficiency increases the operational frequency of heating and cooling systems to keep the desired thermal comfort of building occupants, and ultimately results in excessive energy use. Improving thermal performance of building envelopes can reduce the energy consumption required for space conditioning and in turn provide building occupants with an optimal thermal comfort at a lower energy cost. In this sense, energy diagnostics and retrofit analysis for existing building envelopes are key enablers for improving energy efficiency. Since proper retrofit decisions of existing buildings directly translate into energy cost saving in the future, building practitioners are increasingly interested in methods for reliable identification of potential performance problems so that they can take timely corrective actions. However, sensing what and where energy problems are emerging or are likely to emerge and then analyzing how the problems influence the energy consumption are not trivial tasks. The overarching goal of this dissertation focuses on understanding the gaps in knowledge in methods for building energy diagnostics and retrofit analysis, and filling these gaps by devising a new method for multi-modal visual sensing and analytics using thermography and Building Information Modeling (BIM). First, to address the challenges in scaling and

  4. An analysis of employment intensity of sectoral output growth in ...

    African Journals Online (AJOL)

    The study explores the employment intensity of sectoral output growth in Botswana with a view to identifying key sectors of the Botswana economy that are employment intensive. To achieve this objective, the study used both simple elasticities and econometric procedures to provide empirical evidence concerning the extent ...

  5. A preliminary design and structural analysis on the central column for supporting the full 40 .deg. Sectors at tokamak in pit

    International Nuclear Information System (INIS)

    Nam, Kyoungo; Park, Hyun Ki; Kim, Dong Jin; Moon, Jaeh Wan; Kim, Byung Seok; Watson, Emma; Shaw, Robert

    2012-01-01

    The ITER Tokamak machine is composed of nine 40 .deg. sectors shaped of torus. Each 40.deg. sector is made up of one 40 .deg. vacuum vessel (VV), two 20 .deg. toroidal filed coils and associated vacuum vessel thermal shield (VVTS) segments which consist of one inboard and two outboard VVTS. The VV/TFC/VVTS 40 .deg. sectors are sub assembled at assembly building respectively at sector sub assembly tool and then nine sub assembled 40 .deg. sectors are finally assembled at in-pit of Tokamak building. ITER sector assembly tools are the purpose built assembly tools to assemble nine 40 .deg. sectors into the complete ITER Tokamak machine at Tokamak in pit. Based on the design description document, final report prepared by the ITER organization (IO) and tooling requirements, Korea has carried out the conceptual and preliminary design of these assembly tools. Especially, the central column is the main tool, which is composed of some hollow cylinders, to support full nine 40 .deg. sectors at Tokamak in pit. Configuration and structural analysis of the central column are presented

  6. FINANCIAL PERFORMANCE ANALYSIS AND BANKRUPTCY PREDICTION IN HUNGARIAN DAIRY SECTOR

    Directory of Open Access Journals (Sweden)

    Rozsa Andrea

    2014-07-01

    The preliminary sample for the analysis is framed on the basis of three criteria: amount of the subscribed capital, sales revenues and product structure. Those companies are regarded as competitors that have subscribed capitals in excess of HUF 250 million, consistently high levels of sales revenues and diversified product structures. The preliminary sample consists of 7 companies. In 2012, their total sales revenues were as high as about 50% of the overall amount of sales revenues in the sector. Three of the 7 companies are possessed by foreign owners in full or part, whereas 4 of them belong to Hungarian owners. In 2012, Hungarian-owned companies covered more than one-third of the combined sales revenues of the 7 leading companies. Hence, the competitive positions of these 4 companies based on their financial positions are examined. These calculations have relied on the annual reports for the period of 2008–2012 (balance sheets, income statements, cash flow statements. The research has implemented a comprehensive and comparative financial analysis. The main question is what the key financial characteristics of the Hungarian-owned companies are. Financial indicators are calculated and their time-series analysis is accomplished to describe the sample companies’ capital structures, liquidity and profitability. Using comparative analysis of the applied financial ratios the study determines (1 which company has the most advantageous financial conditions for the successful operation; (2 which companies have disadvantageous financial situation; and (3 which companies are in potential financial distress situation. Potential bankruptcy positions are examined by the applications of Altman and Springate models.

  7. Energy retrofit analysis toolkits for commercial buildings: A review

    International Nuclear Information System (INIS)

    Lee, Sang Hoon; Hong, Tianzhen; Piette, Mary Ann; Taylor-Lange, Sarah C.

    2015-01-01

    Retrofit analysis toolkits can be used to optimize energy or cost savings from retrofit strategies, accelerating the adoption of ECMs (energy conservation measures) in buildings. This paper provides an up-to-date review of the features and capabilities of 18 energy retrofit toolkits, including ECMs and the calculation engines. The fidelity of the calculation techniques, a driving component of retrofit toolkits, were evaluated. An evaluation of the issues that hinder effective retrofit analysis in terms of accessibility, usability, data requirement, and the application of efficiency measures, provides valuable insights into advancing the field forward. Following this review the general concepts were determined: (1) toolkits developed primarily in the private sector use empirically data-driven methods or benchmarking to provide ease of use, (2) almost all of the toolkits which used EnergyPlus or DOE-2 were freely accessible, but suffered from complexity, longer data input and simulation run time, (3) in general, there appeared to be a fine line between having too much detail resulting in a long analysis time or too little detail which sacrificed modeling fidelity. These insights provide an opportunity to enhance the design and development of existing and new retrofit toolkits in the future. - Highlights: • Retrofit analysis toolkits can accelerate the adoption of energy efficiency measures. • A comprehensive review of 19 retrofit analysis toolkits was conducted. • Retrofit toolkits have diverse features, data requirement and computing methods. • Empirical data-driven, normative and detailed energy modeling methods are used. • Identified immediate areas for improvement for retrofit analysis toolkits

  8. Barriers to the adoption of energy-saving technologies in the building sector: A survey study of Jing-jin-tang, China

    International Nuclear Information System (INIS)

    Du, Ping; Zheng, Li-Qun; Xie, Bai-Chen; Mahalingam, Arjun

    2014-01-01

    The building sector of China currently consumes 20% of the total energy consumption. Studies on barriers to the adoption of building energy-saving technologies are of great significance on implementing policies related to achieving energy-saving goals. This paper studied 15 barriers with the aid of information collected through questionnaires and semi-structured interviews. The respondents were 135 employees working in the Jing-jin-tang area. Based on the results of the factor analysis, the barriers were categorized into five groups: attitudes of stakeholders, policies and regulations, auxiliary resources, profitability, and adaptability of the technologies. Analysis of the entire sample showed that the stakeholders’ reluctance to use was the largest barrier, followed by high initial investment and low profitability. Further analysis showed that the occupation and designation of the respondents and the size of the enterprises that they served influenced their perspectives on the barriers. It was found that architects attributed more importance to the adoption of energy-saving technologies than contractors; barriers confronted by employees of large enterprises and small enterprises were different; managers perceived weaker barriers than frontline employees and were more optimistic about the prospect of building energy-saving technologies. Finally, policy recommendations were proposed based on these in-depth and targeted analyses. - Highlights: • Fifteen barriers to the adoption of energy-saving technologies are discussed. • Surveys are conducted in one of China's most technologically developed area. • The barriers are divided into 5 groups according to the results of factor analysis. • Barriers related to profitability greatly hamper the adoption of the technologies. • Comparative analyses show the background of respondents influence their viewpoints

  9. Organizational Challenges in the Adoption of Building Applied Photovoltaics in the Swedish Tenant-Owner Housing Sector

    Directory of Open Access Journals (Sweden)

    Henry Muyingo

    2015-03-01

    Full Text Available Sweden has committed itself to comply with EU-directive 2009/28/EC on energy from renewable sources and 2012/27/EU on improvement in the efficiency of energy. Measures in the existing housing stock, such as installing photovoltaics (PV, provide a means of contributing to the goals above. The purpose of this paper is to study how the organization of property management and the decision-making structure in tenant-owner cooperatives (TOCs in Sweden facilitates or hampers the adoption of large-scale residential building applied photovoltaics (BAPV in this housing sector. Data collected through seven semi-structured interviews of executive board members in seven housing cooperatives were descriptively analyzed and the results indicate that the decision to adopt BAPV in TOCs does not follow the common frameworks of adoption of innovations. The choice by TOCs to adopt BAPV depends more on the wish to lower operating costs than on efforts to promote a sustainable environment and various principal-agency problems during the decision-making process, as well as during the implementation phase create challenges to the adoption of BAPV. There is a need to strengthen the quality and management of knowledge, as well as procurement proficiency in the TOCs in order to harness the potential for BAPV in the sector.

  10. Thermal analysis and design of passive solar buildings

    CERN Document Server

    Athienitis, AK

    2013-01-01

    Passive solar design techniques are becoming increasingly important in building design. This design reference book takes the building engineer or physicist step-by-step through the thermal analysis and design of passive solar buildings. In particular it emphasises two important topics: the maximum utilization of available solar energy and thermal storage, and the sizing of an appropriate auxiliary heating/cooling system in conjunction with good thermal control.Thermal Analysis and Design of Passive Solar Buildings is an important contribution towards the optimization of buildings as systems th

  11. Collective bargaining: An analysis of hurdles and applicability in the public sector

    Directory of Open Access Journals (Sweden)

    Daniel Chigudu

    2015-04-01

    Full Text Available This article discusses the arguments against adopting collective bargaining in the public sector and its benefits. Collective bargaining in the public sector is viewed primarily as undermining democratic governance in one way and paradoxically it is seen as an essential part of democratic governance. In the former view, collective bargaining in the public sector is seen as an interference with administrative law for personal benefit to the detriment of the taxpayer. Proponents of this view argue that unionising public sector employees encourages disloyalty to the government at the expense of public welfare. In the later view, public sector collective bargaining is viewed as a fundamental human right in a pluralistic society. Advocates of this view posit that, public sector unions provide a collective voice that stimulates improvement of government services as well as sound administration of law. They also argue that, public sector collective bargaining represents public policy interests and serves as a watchdog to government’s monopoly power in employment matters. Public sector unions raise employee salaries and perks to levels higher than they would have been in the absence of collective bargaining. These two opposite views are subjected to a critical analysis in this paper, with empirical evidence for both the benefits of public sector collective bargaining and arguments against public sector unions. The article found that public sector collective bargaining depends on the socio-economic background of states although international laws favour public sector unionism.

  12. Energy sector from 1990 to 2005 - analysis and consequences

    International Nuclear Information System (INIS)

    Granic, G.

    2005-01-01

    The paper analyzes the energy sector in the period from 1990 to 2005. What is shown here through an analysis of political, economic, energy, technological and institutional processes, and based on actual developments and non-developments, the consequences on energy situation to be evolved in the next 15 years, are analyzed. A crucial characteristic of this period is the fact that consumption growth is more distant from the trends in the developed countries and is increasingly approaching ones occurring in developing and undeveloped countries. The other such characteristic is lack of technological progress, which could generate desirable structural changes in energy production and demand. Taking in consideration what has been accomplished so far and what has not been accomplished, we cannot expect in the coming period the changes that could significantly modify the relations in the structure of energy production and demand. Keeping the balance between production and demand will be increasingly difficult, as well as keeping the influence on energy prices which will be growing. In this, it is more than ever indispensable that the state takes up its role.(author)

  13. Economic potential of energy-efficient retrofitting in the Swiss residential building sector: The effects of policy instruments and energy price expectations

    International Nuclear Information System (INIS)

    Amstalden, Roger W.; Kost, Michael; Nathani, Carsten; Imboden, Dieter M.

    2007-01-01

    The aim of this paper is to analyse the profitability of energy-efficient retrofit investments in the Swiss residential building sector from the house owner's perspective. Different energy price expectations, policy instruments such as subsidies, income tax deduction and a carbon tax, as well as potential future cost degression of energy efficiency measures were taken into account. The discounted cash flow method was used for the investment analysis of different retrofit packages applied to a model building scheduled for renovation, i.e. a single-family house constructed between 1948 and 1975. The results show that present Swiss policy instruments push investments for energy-efficient retrofitting to profitability. Cost degression has a minor significance for investment profitability. However, the most relevant factor for the investment analysis is the expected energy price. Expecting a future fuel oil price at the level of 2005, efficiency investments are close to profitability even without policy support. If higher energy prices were expected, energy-efficient retrofitting would be an attractive investment opportunity

  14. Detection and Analysis of Threats to the Energy Sector: DATES

    Energy Technology Data Exchange (ETDEWEB)

    Alfonso Valdes

    2010-03-31

    This report summarizes Detection and Analysis of Threats to the Energy Sector (DATES), a project sponsored by the United States Department of Energy and performed by a team led by SRI International, with collaboration from Sandia National Laboratories, ArcSight, Inc., and Invensys Process Systems. DATES sought to advance the state of the practice in intrusion detection and situational awareness with respect to cyber attacks in energy systems. This was achieved through adaptation of detection algorithms for process systems as well as development of novel anomaly detection techniques suited for such systems into a detection suite. These detection components, together with third-party commercial security systems, were interfaced with the commercial Security Information Event Management (SIEM) solution from ArcSight. The efficacy of the integrated solution was demonstrated on two testbeds, one based on a Distributed Control System (DCS) from Invensys, and the other based on the Virtual Control System Environment (VCSE) from Sandia. These achievements advance the DOE Cybersecurity Roadmap [DOE2006] goals in the area of security monitoring. The project ran from October 2007 until March 2010, with the final six months focused on experimentation. In the validation phase, team members from SRI and Sandia coupled the two test environments and carried out a number of distributed and cross-site attacks against various points in one or both testbeds. Alert messages from the distributed, heterogeneous detection components were correlated using the ArcSight SIEM platform, providing within-site and cross-site views of the attacks. In particular, the team demonstrated detection and visualization of network zone traversal and denial-of-service attacks. These capabilities were presented to the DistribuTech Conference and Exhibition in March 2010. The project was hampered by interruption of funding due to continuing resolution issues and agreement on cost share for four months in 2008

  15. Investigation Into Informational Compatibility Of Building Information Modelling And Building Performance Analysis Software Solutions

    OpenAIRE

    Hyun, S.; Marjanovic-Halburd, L.; Raslan, R.

    2015-01-01

    There are significant opportunities for Building Information Modelling (BIM) to address issues related to sustainable and energy efficient building design. While the potential benefits associated with the integration of BIM and BPA (Building Performance Analysis) have been recognised, its specifications and formats remain in their early infancy and often fail to live up to the promise of seamless interoperability at various stages of design process. This paper conducts a case study to investi...

  16. Foundation heat transfer analysis for buildings with thermal piles

    International Nuclear Information System (INIS)

    Almanza Huerta, Luis Enrique; Krarti, Moncef

    2015-01-01

    Highlights: • A numerical transient thermal model for thermo-active foundations is developed. • Thermal interactions between thermal piles and building foundations are evaluated. • A simplified analysis method of thermal interactions between thermal piles and building foundations is developed. - Abstract: Thermal piles or thermo-active foundations utilize heat exchangers embedded within foundation footings to heat and/or cool buildings. In this paper, the impact of thermal piles on building foundation heat transfer is investigated. In particular, a simplified analysis method is developed to estimate the annual ground-coupled foundation heat transfer when buildings are equipped with thermal piles. First, a numerical analysis of the thermal performance of thermo-active building foundations is developed and used to assess the interactions between thermal piles and slab-on-grade building foundations. The impact of various design parameters and operating conditions is evaluated including foundation pile depth, building slab width, foundation insulation configuration, and soil thermal properties. Based on the results of a series of parametric analyses, a simplified analysis method is presented to assess the impact of the thermal piles on the annual heat fluxes toward or from the building foundations. A comparative evaluation of the predictions of the simplified analysis method and those obtained from the detailed numerical analysis indicated good agreement with prediction accuracy lower than 5%. Moreover, it is found that thermal piles can affect annual building foundation heat loss/gain by up to 30% depending on foundation size and insulation level

  17. A scenario analysis of investment options for the Cuban power sector using the MARKAL model

    International Nuclear Information System (INIS)

    Wright, Evelyn L.; Belt, Juan A.B.; Chambers, Adam; Delaquil, Pat; Goldstein, Gary

    2010-01-01

    The Cuban power sector faces a need for extensive investment in new generating capacity, under a large number of uncertainties regarding future conditions, including: rate of demand growth, fluctuations in fuel prices, access to imported fuel, and access to investment capital for construction of new power plants and development of fuel import infrastructure. To identify cost effective investment strategies under these uncertainties, a supply and power sector MARKAL model was assembled, following an extensive review of available data on the Cuban power system and resource potentials. Two scenarios were assessed, a business-as-usual (BAU) scenario assuming continued moderate electricity load growth and domestic fuel production growth, and a high growth (HI) scenario assuming rapid electricity demand growth, rapid increase in domestic fuel production, and a transition to market pricing of electricity. Within these two scenarios sets, sensitivity analyses were conducted on a number of variables. The implications of least-cost investment strategies for new capacity builds, investment spending requirements, electricity prices, fuel expenditures, and carbon dioxide emissions for each scenario were assessed. Natural gas was found to be the cost effective fuel for new generation across both scenarios and most sensitivity cases, suggesting that access to natural gas, through increased domestic production and LNG import, is a clear priority for further analysis in the Cuban context.

  18. A scenario analysis of investment options for the Cuban power sector using the MARKAL model

    Energy Technology Data Exchange (ETDEWEB)

    Wright, Evelyn L.; Chambers, Adam; Delaquil, Pat; Goldstein, Gary [International Resources Group, 1211 Connecticut Avenue, NW, Suite 700, Washington, DC 20036 (United States); Belt, Juan A.B. [US Agency for International Development, 1300 Pennsylvania Avenue, NW, Washington, DC 20523-3800 (United States)

    2010-07-15

    The Cuban power sector faces a need for extensive investment in new generating capacity, under a large number of uncertainties regarding future conditions, including: rate of demand growth, fluctuations in fuel prices, access to imported fuel, and access to investment capital for construction of new power plants and development of fuel import infrastructure. To identify cost effective investment strategies under these uncertainties, a supply and power sector MARKAL model was assembled, following an extensive review of available data on the Cuban power system and resource potentials. Two scenarios were assessed, a business-as-usual (BAU) scenario assuming continued moderate electricity load growth and domestic fuel production growth, and a high growth (HI) scenario assuming rapid electricity demand growth, rapid increase in domestic fuel production, and a transition to market pricing of electricity. Within these two scenarios sets, sensitivity analyses were conducted on a number of variables. The implications of least-cost investment strategies for new capacity builds, investment spending requirements, electricity prices, fuel expenditures, and carbon dioxide emissions for each scenario were assessed. Natural gas was found to be the cost effective fuel for new generation across both scenarios and most sensitivity cases, suggesting that access to natural gas, through increased domestic production and LNG import, is a clear priority for further analysis in the Cuban context. (author)

  19. Comparative Analysis of Disabled Accessibility Needs of Heritage Building in Perak

    Directory of Open Access Journals (Sweden)

    Zahari Nurul Fadzila

    2016-01-01

    Full Text Available Tourism sector was the sixth highest national income provider to the Malaysian economy in 2014. In order to replenish Malaysian economy through tourism, the Malaysian government has to diversify the present tourism products and offers a wide variety of tourism packages. This has mentioned in the National Key Results Area (NKRA development platform highlighted in the 10th Malaysian Plan. Therefore, the tourism sector needs to continuously re-engineer and adapt its business model to suit every customer’s needs and demands, including disabled people. At the moment, one of the highest tourist attraction contributors in Malaysia is the heritage building sector. The heritage building sector in Malaysia becomes popular due to its diverse historical background and culture. It attracts local and international tourists to visit. However, the lack of facilities provided especially for the disable people has hindered its future prospects to become globally popular. The national heritage should be viewed, explored and enjoyed by everybody without discriminating anyone. Insufficient of provision for disable facilities in heritage act has caused barrier to the disable people to enjoy and visit the heritage sites. The objective of this research is to analyze the comparative data that been retrieved in the field of selected case study. It will be carried out by visiting the selected case study, observation and documentary analysis. This research aims to do a comparative analysis of Disabled Accessibility needs of Heritage Building in Perak. The findings of this research will alert the needs of disabled in visiting the heritage building and documented for future research.

  20. Future projections of insured losses in the German private building sector following the A1B climatic change scenario

    Science.gov (United States)

    Held, H.; Gerstengarbe, F.-W.; Hattermann, F.; Pinto, J. G.; Ulbrich, U.; Böhm, U.; Born, K.; Büchner, M.; Donat, M. G.; Kücken, M.; Leckebusch, G. C.; Nissen, K.; Nocke, T.; Österle, H.; Pardowitz, T.; Werner, P. C.; Burghoff, O.; Broecker, U.; Kubik, A.

    2012-04-01

    We present an overview of a complementary-approaches impact project dealing with the consequences of climate change for the natural hazard branch of the insurance industry in Germany. The project was conducted by four academic institutions together with the German Insurance Association (GDV) and finalized in autumn 2011. A causal chain is modeled that goes from global warming projections over regional meteorological impacts to regional economic losses for private buildings, hereby fully covering the area of Germany. This presentation will focus on wind storm related losses, although the method developed had also been applied in part to hail and flood impact losses. For the first time, the GDV supplied their collected set of insurance cases, dating back for decades, for such an impact study. These data were used to calibrate and validate event-based damage functions which in turn were driven by three different types of regional climate models to generate storm loss projections. The regional models were driven by a triplet of ECHAM5 experiments following the A1B scenario which were found representative in the recent ENSEMBLES intercomparison study. In our multi-modeling approach we used two types of regional climate models that conceptually differ at maximum: a dynamical model (CCLM) and a statistical model based on the idea of biased bootstrapping (STARS). As a third option we pursued a hybrid approach (statistical-dynamical downscaling). For the assessment of climate change impacts, the buildings' infrastructure and their economic value is kept at current values. For all three approaches, a significant increase of average storm losses and extreme event return levels in the German private building sector is found for future decades assuming an A1B-scenario. However, the three projections differ somewhat in terms of magnitude and regional differentiation. We have developed a formalism that allows us to express the combined effect of multi-source uncertainty on return

  1. PLACE-BASED GREEN BUILDING: INTEGRATING LOCAL ENVIRONMENTAL AND PLANNING ANALYSIS INTO GREEN BUILDING GUIDELINES

    Science.gov (United States)

    This project will develop a model for place-based green building guidelines based on an analysis of local environmental, social, and land use conditions. The ultimate goal of this project is to develop a methodology and model for placing green buildings within their local cont...

  2. Implementation of the ERM concept in Serbia: Comparative analysis: Real sector and financial sector

    Directory of Open Access Journals (Sweden)

    Barjaktarović Lidija

    2017-01-01

    Full Text Available The paper analyzes the level of development regarding risk management, with a special focus on ERM (Enterprise Risk Management implementation in the Serbian companies. The aim is to raise the awareness regarding the successful risk management implementation in the companies in Serbia, using the bank sector as the benchmark and the example of good practice. The research was conveyed in 2015 and it confirmed the general trend that the companies in Serbia were more inclined to use traditional methods regarding risk management, that the ownership structure influenced the level of ERM awareness in the companies and finally that the Serbian companies lacked the supporting organizational structures and adequate systems of internal controls which would contribute to the successful ERM implementation.

  3. Safety analysis report 231-Z Building

    Energy Technology Data Exchange (ETDEWEB)

    Powers, C.S.

    1989-03-01

    This report provides an intensive review of the nuclear safety of the operation of the 231-Z Building. For background information complete descriptions of the floor plan, building services, alarm systems, and glove box systems are included in this report. In addition, references are included to The Plutonium Laboratory Radiation Work Procedures, Safety Guides, 231-Z Operating Procedures Manual and Nuclear Materials accountability Procedures. Engineered and administrative features contribute to the overall safety of personnel, the building, and environs. The consequences of credible incidents were considered and are discussed.

  4. Canister Storage Building (CSB) Design Basis Accident Analysis Documentation

    Energy Technology Data Exchange (ETDEWEB)

    CROWE, R.D.

    1999-09-09

    This document provides the detailed accident analysis to support ''HNF-3553, Spent Nuclear Fuel Project Final Safety, Analysis Report, Annex A,'' ''Canister Storage Building Final Safety Analysis Report.'' All assumptions, parameters, and models used to provide the analysis of the design basis accidents are documented to support the conclusions in the Canister Storage Building Final Safety Analysis Report.

  5. 308 Building deactivation function analysis report

    International Nuclear Information System (INIS)

    Lund, D.P.

    1995-09-01

    The document contains the functions, function definitions, function interfaces, function interface definitions, Input Computer Automated Manufacturing Definition (IDEFO) diagrams, and a function hierarchy chart that describes what needs to be performed to deactivate the 308 Building

  6. 309 Building deactivation function analysis report

    International Nuclear Information System (INIS)

    Lund, D.P.

    1995-09-01

    The document contains the functions, function definitions, function interfaces, function interface definitions, Input Computer Automated Manufacturing Definition (IDEFO) diagrams, and a function hierarchy chart that describe what needs to be performed to deactivate the 309 Building

  7. Design-Build Partnership Attributes Survey Analysis

    National Research Council Canada - National Science Library

    Pyle, Raymond

    1998-01-01

    Two basic hypotheses were investigated: 1. Finding these attributes for success for a design-build partnership may be accomplished by transferring concepts and ideas from business research on partnership formation. 2...

  8. Concentration in the Greek private hospital sector: a descriptive analysis.

    Science.gov (United States)

    Boutsioli, Zoe

    2007-07-01

    Over the last 20 years, governments all around the world have attempted to boost the role of market and competition in health care industries in order to increase efficiency and reduce costs. The increased competition and the significant implications on costs and prices of health care services resulted in health care industries being transformed. Large firms are merging and acquiring other firms. If this trend continues, few firms will dominate the health care markets. In this study, I use the simple concentration ratio (CR) for the largest 4, 8 and 20 companies to measure the concentration of Greek private hospitals during the period 1997-2004. Also, the Gini coefficient for inequality is used. For the two different categories of hospitals used (a) general and neuropsychiatric and (b) obstetric/gynaecological it is evident that the top four firms of the first category accounted for 43% of sales in 1997, and 52% in 2004, while the four largest firms of the second category accounted for almost 83% in 1997, and 81% in 2004. Also, the Gini coefficient increases over the 8-year period examined from 0.69 in 1997 to 0.82 in 2004. It explains that the market of the private health care services becomes less equal in the sense that fewer private hospitals and clinics hold more and more of the share of the total sales. From a cross-industry analysis it is clear that the private hospital sector has the highest concentration rate. Finally, it appears that the market structure of the private hospitals in Greece resembles more closely to an oligopoly rather than a monopolistic competition, since very few firms dominate the market.

  9. Analysis of energy economic renovation for historic wooden apartment buildings in cold climates

    International Nuclear Information System (INIS)

    Arumägi, Endrik; Kalamees, Targo

    2014-01-01

    Highlights: • Energy saving potential in historic wooden apartment buildings is up to 63%. • In historic wooden apartment buildings an economically viable energy saving level is 50%. • The largest energy saving potential lies in heat source and building service systems. • Of the building structures, insulation of the external wall has the highest potential. • New heating and ventilation systems must be installed to fulfill regulations limits. - Abstract: Buildings represent the largest sector of primary energy consumption and play a major role in saving energy and reducing greenhouse gas emissions. Our analysis of energy consumption and potential energy savings is based on field measurements, computer simulations and economic calculations. The average primary energy consumption (PE) of wooden apartment buildings was 331 kW h/(m 2 a) 83% higher than the limit 180 kW h/(m 2 a) set in national regulations for apartment buildings subject to major renovation. The studied buildings represent a high potential for energy savings. The renovation packages were compiled using different insulation measures, HVAC solutions and energy sources to achieve a 20–65% reduction of primary energy. For historic buildings, the renovation solutions that concentrate on the building envelope can be problematic due to the need to preserve cultural and architectural values. Our calculation results indicate that the cost optimal PE level is around 250 kW h/(m 2 a) and the point at which renovation packages recover expenses is around a PE level of 170 kW h/(m 2 a). In terms of the architectural appearance the point at which renovation packages recover expenses is around a PE level of 210 kW h/(m 2 a). We propose to set a different PE limit for historic wooden apartment buildings with an architectural appearance worth preserving

  10. Analysis of Survivor Benefit Plan - Acceptance and Comparison with Private Sector

    Science.gov (United States)

    1989-01-01

    I COPY AIU WAR COLLEGE ,.SEARCH REPORT ,YSIS OF SURVIVOR BENEFIT PLAN-__CCEPTANCE ’-U AND COMPARISON WITH PRIVATE SECTOR LIEUENNT COLONEL JOHN R...AAA AIR WAR COLLEGE AIR UNIVERSITY ANALYSIS OF SURVIVOR BENEFIT PLAN--ACCEPTANCE AND COMPARISON WITH PRIVATE SECTOR by John R. Adams Lieutenant...Survivor Benefit Plan (SBP)--Acceptance and Comparison With Private Sector . AUTHORS: John R. Adams, Lieutenant Colonel, USAF; Daniel 3. Kohn

  11. A BRIEF ANALYSIS OF PUBLIC SECTOR CONSOLIDATED FINANCIAL STATEMENTS RESEARCHES

    Directory of Open Access Journals (Sweden)

    Andreea CÎRSTEA

    2015-12-01

    Full Text Available The purpose of the paper is to track the evolution of this specific topic of consolidated financial statements in the public sector, in order to be able to present a global picture of the actual knowledge stage of this issue at international level. The study conducted for reaching the proposed objective is a quantitative one. We tried to find out how this issue of public sector consolidated financial statements has sparked the interest of researchers around the world and when the issue was most debated. We concluded that the research of consolidated financial statements in the public sector is in its infancy and nowadays the topic starts to be more and more in the attention of the researchers in this field.

  12. Could baseline establishment be counterproductive for emissions reduction? Insights from Vietnam’s building sector

    DEFF Research Database (Denmark)

    Henrysson, Maryna; Lütken, Søren; Puig, Daniel

    2017-01-01

    Mitigation Actions (NAMAs) to illustrate institutional dynamics, nationally and transnationally, as well as to question whether demands for baseline setting achieve the ideal trade-off between actual GHG emissions reduction and institutionalized demands for accountability. The analysis reveals that......, it argues for the abolition of baselines in favour of adequate monitoring and evaluation, from the perspective that requirement for deviation from fictitious baselines is unproductive and only serves an international techno-managerial discourse....

  13. Analysis of risks and investments’ opportunities in water sector

    Directory of Open Access Journals (Sweden)

    Fjona Zeneli

    2016-01-01

    These opportunities result from the difference between water supply and water demand; an increasingly difference that requires capital investments in production and water treatment technologies. Investments need to be combined with the knowledge on the legislation, regulatory framework and technological developments. This article may serve to clarify type of investments in drinking water sector, known by literature, to identify opportunities of investment in this sector, indicating the theoretical framework of beta and alpha risk ratio coefficient calculation and to suggest how these types of investments can be allocated to the investment portfolios.

  14. Modelo de aprendizaje para la selección de un proyecto diseño-construcción (llave en mano en el sector público A learning model for design-build project selection in the public sector

    Directory of Open Access Journals (Sweden)

    Alfonso Bastias

    2010-04-01

    public sector has historically separated design and construction contracts. In the 1990s, the U.S. public sector began to experiment with design-build project delivery, which combines design and construction in one contract. In 1997, a decision support system was developed to provide a formal selection model for public sector design-build projects. The model supports public owners in determining which projects are appropriate for design-build delivery. This initial model was static in nature and was based on a regression analysis of 104 projects. The analysis resulted in a predictive model with five performance criteria: overall satisfaction; administrative burden; conformance to expectations; schedule variance; and budget variance. Since 1997, the number of design-build projects has increased dramatically and public sector design-build methods have evolved. The original model can be improved with new data and a new framework to provide for an adaptive model as the industry continues to evolve. This paper presents a formalized application and use of learning capabilities to supplement the original static model. This model adjusts parameters and functions using artificial intelligence as the main knowledge engine. This approach can be adapted to many applications of decision support in the design and construction industry.

  15. Building

    OpenAIRE

    Seavy, Ryan

    2014-01-01

    Building for concrete is temporary. The building of wood and steel stands against the concrete to give form and then gives way, leaving a trace of its existence behind. Concrete is not a building material. One does not build with concrete. One builds for concrete. MARCH

  16. The Indonesian seafood sector; a value chain analysis

    NARCIS (Netherlands)

    Duijn, van A.P.; Beukers, R.; Pijl, van der W.

    2012-01-01

    The Asian region is a major supplier of fish products to the EU market. Over the past five years in par-ticular, the aquaculture sector in some Asian countries has become an important producer as well as ex-porter of whitefish and shrimps. Within the Asian region, CBI is currently studying the

  17. Input-output analysis in fertilizers sector. A case study of Turkey

    International Nuclear Information System (INIS)

    Karkacier, O.; Guelse, H.S.; Sayili, M.; Akca, H.

    1999-01-01

    The types of structural analysis in the input-output model known are forward and backwards ties. Fertilizer sector is tied forwardly agriculture, agri-business, chemistry, petro-chemistry and glass sector. In addition, it tied backwardly mining, chemistry, petro-chemistry, electricity, gas, water and transportation. The effect of backward tie of fertilizer sector is more important than its effect of the forward ties. In this study, by means of the year of 1979, 1985 and 1990 input-output table of Turkey the own situation of fertilizer industry and the production relation with other sectors of the economy have been tired to explain with forward and backwards ties. According to the result of the research it was determined that in 1990, (u j ) input coefficient of fertilizer sector is 69 %. That is, 69 percent of the product of fertilizer sector was used as an intermediate goods by other sectors. Therefore, 31 percent of goods produced by fertilizer sector was consumed as a final good. In addition, in this year, (w i ) intermediate use coefficient of fertilizer sector is 52 %. (w i ) intermediate use coefficient of fertilizer sector decreased from 1973 to 1990, as a result of this final use coefficient (1-w i ) increased. Refs. 5 (author)

  18. Modelling energy savings in the Danish building sector combined with internalisation of health related externalities in a heat and power system optimisation model

    DEFF Research Database (Denmark)

    Zvingilaite, Erika

    2013-01-01

    . Furthermore, the results suggest that changes in the energy generation sector are the prime driver behind the reduction of environmental externalities of energy. Heat savings in buildings play only a small role under model assumptions. © 2012Elsevier Ltd. All rights reserved.......A substantial untapped energy saving potential rests in the building sector and is expected to play an important role in achieving reduction of environmental impacts of energy. In order to utilise this potential, effective policy measures need to be adopted to remove the existing barriers...... and create incentives. For that purpose, the cost effective energy saving options together with an optimal level of savings and expected environmental benefits have to be identified. The paper reports on a study that analyses these questions by including heat-saving measures in buildings into an energy...

  19. Study and constructive analysis of an office building

    OpenAIRE

    CORT AZCÁRRAGA, PAULA

    2015-01-01

    [EN] The development is based on the study and analysis of an office building located in Drongsesteenweg, Gent 9000. The building has 4 levels and basement. The structure is with prefabricated concrete, a very typical way to build in Belgium, only the basement was built in situ. Typology floor is hollow core slab, it is a prefabricated unidirectional floor. Stairs are prefabricated too, executed by a company specialized in this type works. To the facade they use two types of bricks, ceramic a...

  20. A decision Enhancement Service for Stakeholder Analysis to Achieve Transformations in the Public Sector

    NARCIS (Netherlands)

    Knol, Arjan; Janssen, Marijn; Sol, H G

    2015-01-01

    Sourcing has become a popular practice for public sector managers aiming for transformations to save costs and improve service delivery. Nevertheless, public sector sourcing often fails due to stakeholder resistance and power struggles, stressing the need for stakeholder analysis. This paper

  1. Statistical Compilation of the ICT Sector and Policy Analysis | Page 5 ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    The project is designed to expand the scope of conventional investigation beyond the telecommunications industry to include other vertically integrated components of the ICT sector such as manufacturing and services. ... Statistical Compilation of the ICT Sector and Policy Analysis project : country experiences; Malaysia.

  2. Industrial wastes from the boat-building sector in the Marche Region (Italy): a parametric and chemical-physical characterization.

    Science.gov (United States)

    Carchesio, M; Tatàno, F; Tosi, G; Trivellone, C H

    2013-01-01

    Using the renowned leisure boat-building sector in the Marche Region (Italy) as a case-study, this paper addresses the characterization of (1) the industrial waste generation from the building of composite material-based boats and (2) some chemical-physical properties of representative types of boat-building residues (plastic foam, hardened resin, fibre-reinforced composite residues, and sanding dust). A parametric evaluation based on the number of employees gave a representative unit generation rate per employee (UGRpE) of 1.47 tons(waste) employee(-1) year(-1) for the entire Marche regional boatbuilding district, whereas evaluations carried out separately for three case-study companies provided values of 1.56, 3.07, and 1.12 tons(waste) employee(-1) year(-1) as representative for a mass-produced motor boat builder (case-study company '1'), a customized sailing boat builder (case-study company '2'), and a mould and structural component builder (case-study company '3'), respectively. The original proposal and evaluation of two additional generation rates based on physical characteristics intrinsic to the manufactured product, i.e. the unit generation rate per boat area (UGRpA) and per boat weight (UGRpW), confirmed the higher waste generation for the sailing boat builder(representative UGRpA and UGRpW values of 0.35 tons(waste) m(-2)(boat) year(-1) and 2. 71 tons(waste) tons(-1)(boat) year(-1), respectively) compared with the motor boat builder (representative UGRpA and UGRpW values of 0.06 tons(waste) m(-2)(boat) year(-1) and 0.49 tons(waste) tons(-1)(boat) year(-1), respectively). The chemical-physical property characterization of the selected residues revealed the following aspects: a general condition of low moisture contents; significant ash contents in the glass- and carbon-fibre composite residues and the correlated sanding dust; and relatively high energy content values in the overall range 14,144-32,479 kJ kg(-1), expressed as the lower heating value.

  3. Analysis of the energy metabolism of urban socioeconomic sectors and the associated carbon footprints: Model development and a case study for Beijing

    International Nuclear Information System (INIS)

    Zhang, Yan; Zheng, Hongmei; Fath, Brian D.

    2014-01-01

    Cities consume 80% of the world's energy; therefore, analyzing urban energy metabolism and the resulting carbon footprint provides basic data for formulating target carbon emission reductions. While energy metabolism includes both direct and indirect consumptions among sectors, few researchers have studied indirect consumption due to a lack of data. In this study, we used input–output analysis to calculate the energy flows among directly linked sectors. Building on this, we used ecological network analysis to develop a model of urban energy flows and also account for energy consumption embodied by the flows among indirectly linked sectors (represented numerically as paths with a length of 2 or more). To illustrate the model, monetary input–output tables for Beijing from 2000 to 2010 were analyzed to determine the embodied energy consumption and associated carbon footprints of these sectors. This analysis reveals the environmental pressure based on the source (energy consumption) and sink (carbon footprint) values. Indirect consumption was Beijing's primary form, and the carbon footprint therefore resulted mainly from indirect consumption (both accounting for ca. 60% of the total, though with considerable variation among sectors). To reduce emissions, the utilization efficiency of indirect consumption must improve. - Highlights: • We quantified the embodied energy transfers among Beijing's socioeconomic sectors. • We calculated the sectors' intensity of energy consumption and carbon footprint. • The indirect energy consumption was higher than the direct for all sectors. • The high-indirect-consumption sectors are at the end of industrial supply chains. • High-indirect-consumption sectors can improve upstream products energy efficiency

  4. Building application of solar energy. Study no. 2: Representative buildings for solar energy performance analysis and market penetration

    Science.gov (United States)

    Hirshberg, A. S.

    1975-01-01

    The following topics are discussed: (1) Assignment of population to microclimatic zones; (2) specifications of the mix of buildings in the SCE territory; (3) specification of four typical buildings for thermal analysis and market penetration studies; (4) identification of the materials and energy conserving characteristics of these typical buildings; (5) specifications of the HVAC functions used in each typical building, and determination of the HVAC systems used in each building; and (6) identification of the type of fuel used in each building.

  5. Analysis on Investment Behavior of Agricultural Sector in China

    Institute of Scientific and Technical Information of China (English)

    Sun Zhuo

    2015-01-01

    In the process of industrialization, China has been a big agricultural country, and the agricultural sector's economic activities have been playing important role in economic growth. This paper established the investment behavior model of agricultural enterprises on the basis of Chinese practice. And then, the model presented the important factors impacting on investment, such as financing cost, wage, and policy factors,etc. Thirdly, this paper in particular usedR-studio to estimate the impact of financing cost and policy factor on investment and capital accumulation of primary industry sector by gathering the data from 2003 to 2013. The results showed that the official interest rate of loans of financial institutions could be the proxy variable as the financing cost of agricultural enterprises, and the employment level of agricultural enterprises had negative impact on investment. Finally, this paper provided some explanations and suggestions on the basis of above results.

  6. Optimizing Bus Passenger Complaint Service through Big Data Analysis: Systematized Analysis for Improved Public Sector Management

    Directory of Open Access Journals (Sweden)

    Weng-Kun Liu

    2016-12-01

    Full Text Available With the advances in industry and commerce, passengers have become more accepting of environmental sustainability issues; thus, more people now choose to travel by bus. Government administration constitutes an important part of bus transportation services as the government gives the right-of-way to transportation companies allowing them to provide services. When these services are of poor quality, passengers may lodge complaints. The increase in consumer awareness and developments in wireless communication technologies have made it possible for passengers to easily and immediately submit complaints about transportation companies to government institutions, which has brought drastic changes to the supply–demand chain comprised of the public sector, transportation companies, and passengers. This study proposed the use of big data analysis technology including systematized case assignment and data visualization to improve management processes in the public sector and optimize customer complaint services. Taichung City, Taiwan, was selected as the research area. There, the customer complaint management process in public sector was improved, effectively solving such issues as station-skipping, allowing the public sector to fully grasp the service level of transportation companies, improving the sustainability of bus operations, and supporting the sustainable development of the public sector–transportation company–passenger supply chain.

  7. The electricity market. Situation and predictions 2018 - Sectoral and competitive analysis

    International Nuclear Information System (INIS)

    2017-01-01

    This document comprises two reports. A first one, published and updated three times a year, and a second one which is a yearly publication. The first one, based on an analysis of market perspectives and of actor strategies, proposes a synthesis on the consequences of the evolution of the economic environment, on major trends noticed for the electric power sector, and on predictable evolutions. It proposes the most recent data regarding the activities of about 200 firms belonging to the power sector (notably in terms of turnover and of electric power consumption). It highlights recent events for companies of the sector: takeovers, investments, restructuring, introduction of new products, and so on. It proposes a sector-based dashboard which contains all the critical figures useful to analyse the sector situation (activity determining factors, key figures for the sector and its environment). The annual report proposes a presentation of the sector and of the determining factors of its activity, an analysis of the activity evolution (trends, indicators like turnover, electric power consumption and production, prices and regulated tariffs, power imports and exports), a presentation of financial performance of electricity producers, a description of the sector economic structure (evolution of the economic tissue, analysis of structural characteristics), and a presentation of actors and of the competitive landscape (ranking and positioning of electric power providers and producers, market shares, identity sheets of the main actors, highlights, and ranking of the main companies in terms of turnover and of financial performance)

  8. Aid effectiveness in the Education Sector: A Dynamic Panel Analysis

    OpenAIRE

    Michaelowa, Katharina; Weber, Anke

    2007-01-01

    Applying the general question of aid effectiveness to the sector of education, this paper provides some evidence for a positive effect of development assistance on primary enrolment and completion. However, even the most optimistic estimates clearly show that at any realistic rate of growth, aid will never be able to move the world markedly closer towards the internationally agreed objective of “Education For All”. Universal primary education requires increased efficiency of educational spend...

  9. FACTOR ANALYSIS OF MULTISTOREY RESIDENTIAL BUILDINGS ZONE

    Directory of Open Access Journals (Sweden)

    Петр Матвеевич Мазуркин

    2016-02-01

    Full Text Available According to the UN classification of 11 classes of soil cover, the first three are grass, trees and shrubs and forests. In the city they correspond to the three elements of vegetation: lawns, tree plantings (trees and shrubs. We have adopted zoning for city-building to identify statistical regularities. Map dimensions in GIS "Map 2011" Yoshkar-Ola was allocated to "residential zone" and "Area of construction of multi-storey residential buildings (cadastral 58 quart crystals". The parameters of the elements of the vegetation cover have been considered: the number of elements of different levels, area and perimeter, the absolute and relative form, and activity of vegetation. As the result, we have obtained equations of binomial rank distributions, conducted the ratings and selected the best of cadastral quarter on environmental conditions.

  10. Analysis of investment potential for enterprises of economic agrarian sector

    Directory of Open Access Journals (Sweden)

    A.E. Dankevych

    2017-12-01

    Full Text Available The article deals with and determines the peculiarities of the investment potential of lands of Ukrainian economic agrarian sector. The author studies the main positives contributing the development of investment for enterprises of agricultural purpose. The reasons that restrain the investment in agriculture are determined. It is emphasized that when using land resources, one should take into account the current specificity of environment in the economic agrarian sector. The article singles out the factors, which form the specificity of development of lease land relations. It is stressed that the important characteristic of lease land relations is their social and economic direction. It is proved that the obligatory condition of a lease agreement has to become the characteristic of a quality state for a land plot. More than a third part of all national income of the country was formed in economic agrarian sector. In particular, 70 % of total amount of retail goods turnover, a third part of main production facilities, a fourth part of population, employed in the Ukrainian economy, was busy working. According to the data of UNO, the potential of Ukrainian lands allows to provide about 100 mln. individuals with foods. To reach this and to renew the present level under current economic conditions one can due to the implementation of essentially new approaches to the organization of agricultural production.

  11. Analysis of Building 839: Carlisle Barracks, Pennsylvania

    Science.gov (United States)

    2013-09-01

    within prehistory or history is made clear.”101 A historic property is determined as either significant or not significant by applying standardized...yielded, or is likely to yield, information important in prehistory or history. 3.3 Significance Eligibility to the NRHP is based upon...given period in history or prehistory . The workmanship of Building 839 is evident in the mortar joints of the brick walls (Figure 53), the rake boards

  12. Liquidity Risk Management: An Empirical Analysis on Panel Data Analysis and ISE Banking Sector

    OpenAIRE

    Sibel ÇELİK; Yasemin Deniz AKARIM

    2012-01-01

    In this paper, we test the factors affecting liquidity risk management in banking sector in Turkey by using panel regression analysis. We use the data for 9 commercial banks traded in Istanbul Stock Exchange for the period 1998-2008. In conclusion, we find that risky liquid assets and return on equity variables are negatively related with liquidity risk. However, external financing and return on asset variables are positively related with liquidity risk. This finding is importance for banks s...

  13. Barriers' and policies' analysis of China's building energy efficiency

    International Nuclear Information System (INIS)

    Zhang, Yurong; Wang, Yuanfeng

    2013-01-01

    With the rapid economic growth and the improvement of people's living standards, China's building energy consumption has kept rising during the past 15 years. Under the effort of the Chinese government and the society, China's building energy efficiency has made certain achievements. However, the implementation of building energy efficiency in China is still far from its potential. Based on the analysis of the existing policies implemented in China, the article concluded that the most essential and the most effective ways to promote building energy efficiency is the government's involvement as well as economic and financial incentives. In addition, the main barriers in the process of promoting building energy efficiency in China are identified in six aspects. It has been found that the legal system and administrative issues constitute major barriers, and the lack of financial incentives and the mismatching of market mechanism also hamper the promotion of building energy efficiency. Finally, in view of the existing policies and barriers analysis, three corresponding policy proposals are presented. -- Highlights: •The existing policies implemented in China from three aspects are presented and analysed. •The Government's involvement is the most essential effective way to promote building-energy efficiency. •Six aspects of barriers in promoting building energy efficiency in China are identified. •The legal system and administrative issues constitute the major barriers. •Three policy proposals to further promote building energy efficiency in China are proposed

  14. A system approach to the environmental analysis of industrial buildings

    Energy Technology Data Exchange (ETDEWEB)

    San-Jose Lombera, Jose-Tomas [LABEIN-Tecnalia, C/Geldo, Parque Tecnologico de Bizkaia, Edificio 700, 48160 Derio (Vizcaya) (Spain); Department of Science of Materials, ESTSI Bilbao-University of Basque Country (UPV/EHU), Alda, Urquijo s/n, 48013 Bilbao (Spain); Garrucho Aprea, Isaac [SEDICAL S.A., Txorierri Etorbidea 46 - Pab, 12 F 48150 Sondica (Vizcaya) (Spain)

    2010-03-15

    The construction sector plays a major role in the development of society. It wields enormous influence over economic activity, employment and growth rates. However, it also has a substantial impact on the natural environment, the effects of which are evident across the world. Over recent decades, pioneering initiatives have proposed environmentally friendly buildings and sustainable construction has centred on residential and office buildings. Nevertheless, further consideration still needs to be given to sustainability in many areas of industrial construction. Accordingly, an Integrated Value Model for Sustainable Assessment (MIVES) is presented in this article that applies a set of six study scopes to define the sustainability criteria of industrial buildings. The system uses a requirements tree to quantify sustainability at various hierarchical levels, in order to assess the behaviour of industrial buildings and compliance with the criteria. Assignment of value functions to the sustainability criteria is then described in the context of a case study of a printing works, which demonstrates the effectiveness of this model at unifying both qualitative and quantitative indicators, in order to arrive at a specific ''environmental sustainability index'' for the industrial building. (author)

  15. The change of CO2 emission on manufacturing sectors in Indonesia: An input-output analysis

    Science.gov (United States)

    Putranti, Titi Muswati; Imansyah, Muhammad Handry

    2017-12-01

    The objective of this paper is to evaluate the change of CO2 emission on manufacturing sectors in Indonesia using input-output analysis. The method used supply perspective can measure the impact of an increase in the value added of different productive on manufacturing sectors on total CO2 emission and can identify the productive sectors responsible for the increase in CO2 emission when there is an increase in the value added of the economy. The data used are based on Input-Output Energy Table 1990, 1995 and 2010. The method applied the elasticity of CO2 emission to value added. Using the elasticity approach, one can identify the highest elasticity on manufacturing sector as the change of value added provides high response to CO2 emission. Therefore, policy maker can concentrate on manufacturing sectors with the high response of CO2 emission due to the increase of value added. The approach shows the contribution of the various sectors that deserve more consideration for mitigation policy. Five of highest elasticity of manufacturing sectors of CO2 emission are Spinning & Weaving, Other foods, Tobacco, Wearing apparel, and other fabricated textiles products in 1990. Meanwhile, the most sensitive sectors Petroleum refinery products, Other chemical products, Timber & Wooden Products, Iron & Steel Products and Other non-metallic mineral products in 1995. Two sectors of the 1990 were still in the big ten, i.e. Spinning & weaving and Other foods in 1995 for the most sensitive sectors. The six sectors of 1995 in the ten highest elasticity of CO2 emission on manufacturing which were Plastic products, Other chemical products,Other fabricated metal products, Cement, Iron & steel products, Iron & steel, still existed in 2010 condition. The result of this research shows that there is a change in the most elastic CO2 emission of manufacturing sectors which tends from simple and light manufacturing to be a more complex and heavier manufacturing. Consequently, CO2 emission jumped

  16. Final Safety Analysis Document for Building 693 Chemical Waste Storage Building at Lawrence Livermore National Laboratory

    International Nuclear Information System (INIS)

    Salazar, R.J.; Lane, S.

    1992-02-01

    This Safety Analysis Document (SAD) for the Lawrence Livermore National Laboratory (LLNL) Building 693, Chemical Waste Storage Building (desipated as Building 693 Container Storage Unit in the Laboratory's RCRA Part B permit application), provides the necessary information and analyses to conclude that Building 693 can be operated at low risk without unduly endangering the safety of the building operating personnel or adversely affecting the public or the environment. This Building 693 SAD consists of eight sections and supporting appendices. Section 1 presents a summary of the facility designs and operations and Section 2 summarizes the safety analysis method and results. Section 3 describes the site, the facility desip, operations and management structure. Sections 4 and 5 present the safety analysis and operational safety requirements (OSRs). Section 6 reviews Hazardous Waste Management's (HWM) Quality Assurance (QA) program. Section 7 lists the references and background material used in the preparation of this report Section 8 lists acronyms, abbreviations and symbols. Appendices contain supporting analyses, definitions, and descriptions that are referenced in the body of this report

  17. An analysis of present and future trends of the service sector

    International Nuclear Information System (INIS)

    Bechmann, G.; Brosi, G.; Japp, K.P.; Paschen, H.

    1976-07-01

    In this report problems of forecasting in the service sector are discussed. Main emphasis is placed on a critical analysis of attempts at measuring the 'productivity' of services and their 'contribution to the gross national product'. Quantitative forecasting methods are then compared with a social-science approach at assesssing structural trends, esp. in the public sector. Starting from an analysis of constraints and their impact on different goals and objectives in the public service sector restrictions on modernisation strategies are described and alternative policies for rationalisation discussed. (orig.) [de

  18. Study of vibration analysis for nuclear reactor building

    International Nuclear Information System (INIS)

    Hirashima, Shin-ichi

    1978-01-01

    The mutual interference between the contiguous buildings with separate foundations and also that between the outer wall under the ground and the foundation bottom of the building were taken into consideration for the vibration analysis with spring-mass system. For two contiguous foundations of buildings it was attempted to represent the static mutual interference by a spring-mass system model. The theoretical analysis formulas are shown for the combination of the vertical movement and rocking motion, and for the interfering forces between the foundation and the outer wall of a building. The method of extending the model to dynamic one is explained. Several spring constants utilized in the analysis were obtained, for example, for mutual interference springs regarding vertical motion, mutual interfering springs for the foundation and the outer wall of a building and the mutual interference springs concerning horizontal movement. These models and analysis were applied to the BWR-MARK II-1100 MW nuclear reactor building and the contiguous turbine building. The structures and level relations of two buildings are shown, and the spring-mass system model for these buildings is expressed. The masses of about 20, the weights, the rotating inertia, the sectional moment of inertia, the spring constant and the damping coefficient for each mass are tabulated. As the results, the peak displacements occur at 2.556 Hz, 6.918 Hz, 10.43 Hz and 13.85 Hz. The damping coefficient is large and about 10 - 30% at the lower order modes. The calculated and the measured vibration characteristics for the BWR plant buildings are not much different, and this spring-mass system model is verified to be adequate. (Nakai, Y.)

  19. Structural Identification And Seismic Analysis Of An Existing Masonry Building

    International Nuclear Information System (INIS)

    Del Monte, Emanuele; Galano, Luciano; Ortolani, Barbara; Vignoli, Andrea

    2008-01-01

    The paper presents the diagnostic investigation and the seismic analysis performed on an ancient masonry building in Florence. The building has historical interest and is subjected to conservative restrictions. The investigation involves a preliminary phase concerning the research of the historic documents and a second phase of execution of in situ and laboratory tests to detect the mechanical characteristics of the masonry. This investigation was conceived in order to obtain the 'LC2 Knowledge Level' and to perform the non-linear pushover analysis according to the new Italian Standards for seismic upgrading of existing masonry buildings

  20. Building energy analysis of Electrical Engineering Building from DesignBuilder tool: calibration and simulations

    Science.gov (United States)

    Cárdenas, J.; Osma, G.; Caicedo, C.; Torres, A.; Sánchez, S.; Ordóñez, G.

    2016-07-01

    This research shows the energy analysis of the Electrical Engineering Building, located on campus of the Industrial University of Santander in Bucaramanga - Colombia. This building is a green pilot for analysing energy saving strategies such as solar pipes, green roof, daylighting, and automation, among others. Energy analysis was performed by means of DesignBuilder software from virtual model of the building. Several variables were analysed such as air temperature, relative humidity, air velocity, daylighting, and energy consumption. According to two criteria, thermal load and energy consumption, critical areas were defined. The calibration and validation process of the virtual model was done obtaining error below 5% in comparison with measured values. The simulations show that the average indoor temperature in the critical areas of the building was 27°C, whilst relative humidity reached values near to 70% per year. The most critical discomfort conditions were found in the area of the greatest concentration of people, which has an average annual temperature of 30°C. Solar pipes can increase 33% daylight levels into the areas located on the upper floors of the building. In the case of the green roofs, the simulated results show that these reduces of nearly 31% of the internal heat gains through the roof, as well as a decrease in energy consumption related to air conditioning of 5% for some areas on the fourth and fifth floor. The estimated energy consumption of the building was 69 283 kWh per year.

  1. Guidelines for Using Building Information Modeling for Energy Analysis of Buildings

    Directory of Open Access Journals (Sweden)

    Thomas Reeves

    2015-12-01

    Full Text Available Building energy modeling (BEM, a subset of building information modeling (BIM, integrates energy analysis into the design, construction, and operation and maintenance of buildings. As there are various existing BEM tools available, there is a need to evaluate the utility of these tools in various phases of the building lifecycle. The goal of this research was to develop guidelines for evaluation and selection of BEM tools to be used in particular building lifecycle phases. The objectives of this research were to: (1 Evaluate existing BEM tools; (2 Illustrate the application of the three BEM tools; (3 Re-evaluate the three BEM tools; and (4 Develop guidelines for evaluation, selection and application of BEM tools in the design, construction and operation/maintenance phases of buildings. Twelve BEM tools were initially evaluated using four criteria: interoperability, usability, available inputs, and available outputs. Each of the top three BEM tools selected based on this initial evaluation was used in a case study to simulate and evaluate energy usage, daylighting performance, and natural ventilation for two academic buildings (LEED-certified and non-LEED-certified. The results of the case study were used to re-evaluate the three BEM tools using the initial criteria with addition of the two new criteria (speed and accuracy, and to develop guidelines for evaluating and selecting BEM tools to analyze building energy performance. The major contribution of this research is the development of these guidelines that can help potential BEM users to identify the most appropriate BEM tool for application in particular building lifecycle phases.

  2. An application of energy and exergy analysis in agricultural sector of Malaysia

    International Nuclear Information System (INIS)

    Ahamed, J.U.; Saidur, R.; Masjuki, H.H.; Mekhilef, S.; Ali, M.B.; Furqon, M.H.

    2011-01-01

    Thermodynamic losses usually take place in machineries used for agricultural activities. Therefore, it is important to identify and quantify the losses in order to devise strategies or policies to reduce them. An exergy analysis is a tool that can identify the losses occurred in any sector. In this study, an analysis has been carried out to estimate energy and exergy consumption of the agricultural sector in Malaysia. Energy and exergy efficiencies have been determined for the devices used in the agricultural sector of Malaysia, where petrol, diesel and fuel oil are used to run the machineries. Energy and exergy flow diagrams for the overall efficiencies of Malaysian agricultural sector are presented as well. The average overall energy and exergy efficiencies of this sector were found to be 22% and 20.728%, respectively, within the period from 1991 to 2009. These figures were found to be lower than those of Norway but higher than Turkey. - Highlights: ► Highest exergy efficiency was found about 20.7% for the year 2007. ► The exergy efficiency of the agro-sector in Malaysia was lower than that of energy efficiency. ► It was also found that this sector of Malaysia is less efficient than Saudi Arabia and Norway. ► Energy and exergy losses were identified through this analysis. ► Part of the losses can be reduced using appropriate technology, management and policy.

  3. An Application of Multiplier Analysis in Analyzing the Role of Mining Sectors on Indonesian National Economy

    Science.gov (United States)

    Subanti, S.; Hakim, A. R.; Hakim, I. M.

    2018-03-01

    This purpose of the current study aims is to analyze the multiplier analysis on mining sector in Indonesia. The mining sectors defined by coal and metal; crude oil, natural gas, and geothermal; and other mining and quarrying. The multiplier analysis based from input output analysis, this divided by income multiplier and output multiplier. This results show that (1) Indonesian mining sectors ranked 6th with contribute amount of 6.81% on national total output; (2) Based on total gross value added, this sector contribute amount of 12.13% or ranked 4th; (3) The value from income multiplier is 0.7062 and the value from output multiplier is 1.2426.

  4. Risk-based input-output analysis of influenza epidemic consequences on interdependent workforce sectors.

    Science.gov (United States)

    Santos, Joost R; May, Larissa; Haimar, Amine El

    2013-09-01

    Outbreaks of contagious diseases underscore the ever-looming threat of new epidemics. Compared to other disasters that inflict physical damage to infrastructure systems, epidemics can have more devastating and prolonged impacts on the population. This article investigates the interdependent economic and productivity risks resulting from epidemic-induced workforce absenteeism. In particular, we develop a dynamic input-output model capable of generating sector-disaggregated economic losses based on different magnitudes of workforce disruptions. An ex post analysis of the 2009 H1N1 pandemic in the national capital region (NCR) reveals the distribution of consequences across different economic sectors. Consequences are categorized into two metrics: (i) economic loss, which measures the magnitude of monetary losses incurred in each sector, and (ii) inoperability, which measures the normalized monetary losses incurred in each sector relative to the total economic output of that sector. For a simulated mild pandemic scenario in NCR, two distinct rankings are generated using the economic loss and inoperability metrics. Results indicate that the majority of the critical sectors ranked according to the economic loss metric comprise of sectors that contribute the most to the NCR's gross domestic product (e.g., federal government enterprises). In contrast, the majority of the critical sectors generated by the inoperability metric include sectors that are involved with epidemic management (e.g., hospitals). Hence, prioritizing sectors for recovery necessitates consideration of the balance between economic loss, inoperability, and other objectives. Although applied specifically to the NCR, the proposed methodology can be customized for other regions. © 2012 Society for Risk Analysis.

  5. Performance evaluation of existing building structure with pushover analysis

    Science.gov (United States)

    Handana, MAP; Karolina, R.; Steven

    2018-02-01

    In the management of the infrastructure of the building, during the period of buildings common building damage as a result of several reasons, earthquakes are common. The building is planned to work for a certain service life. But during the certain service life, the building vulnerable to damage due to various things. Any damage to cultivate can be detected as early as possible, because the damage could spread, triggering and exacerbating the latest. The newest concept to earthquake engineering is Performance Based Earthquake Engineering (PBEE). PBEE divided into two, namely Performance Based Seismic Design (PBSD) and Performance Based Seismic Evaluation (PBSE). Evaluation on PBSE one of which is the analysis of nonlinear pushover. Pushover analysis is a static analysis of nonlinear where the influence of the earthquake plan on building structure is considered as burdens static catch at the center of mass of each floor, which it was increased gradually until the loading causing the melting (plastic hinge) first within the building structure, then the load increases further changes the shapes of post-elastic large it reached the condition of elastic. Then followed melting (plastic hinge) in the location of the other structured.

  6. Multicriteria Analysis of Assembling Buildings from Steel Frame Structures

    Science.gov (United States)

    Miniotaite, Ruta

    2017-10-01

    Steel frame structures are often used in the construction of public and industrial buildings. They are used for: all types of slope roofs; walls of newly-built public and industrial buildings; load bearing structures; roofs of renovated buildings. The process of assembling buildings from steel frame structures should be analysed as an integrated process influenced by such factors as construction materials and machinery used, the qualification level of construction workers, complexity of work, available finance. It is necessary to find a rational technological design solution for assembling buildings from steel frame structures by conducting a multiple criteria analysis. The analysis provides a possibility to evaluate the engineering considerations and find unequivocal solutions. The rational alternative of a complex process of assembling buildings from steel frame structures was found through multiple criteria analysis and multiple criteria evaluation. In multiple criteria evaluation of technological solutions for assembling buildings from steel frame structures by pairwise comparison method the criteria by significance are distributed as follows: durability is the most important criterion in the evaluation of alternatives; the price (EUR/unit of measurement) of a part of assembly process; construction workers’ qualification level (category); mechanization level of a part of assembling process (%), and complexity of assembling work (in points) are less important criteria.

  7. Sector-specific issues and reporting methodologies supporting the General Guidelines for the voluntary reporting of greenhouse gases under Section 1605(b) of the Energy Policy Act of 1992. Volume 1: Part 1, Electricity supply sector; Part 2, Residential and commercial buildings sector; Part 3, Industrial sector

    International Nuclear Information System (INIS)

    1994-10-01

    DOE encourages you to report your achievements in reducing greenhouse gas emissions and sequestering carbon under this program. Global climate change is increasingly being recognized as a threat that individuals and organizations can take action against. If you are among those taking action, reporting your projects may lead to recognition for you, motivation for others, and synergistic learning for the global community. This report discusses the reporting process for the voluntary detailed guidance in the sectoral supporting documents for electricity supply, residential and commercial buildings, industry, transportation, forestry, and agriculture. You may have reportable projects in several sectors; you may report them separately or capture and report the total effects on an entity-wide report

  8. Pilot project for a commercial buildings Energy Analysis and Diagnostic Center (EADC) program. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Capehart, B.L.

    1996-02-01

    Commercial energy use costs businesses around $70 billion annually. Many of these businesses are small and medium sized organizations that do not have the resources to help themselves, or to pay for professional engineering services to help reduce their energy costs and improve their economic competitiveness. Energy cost reduction actions with payback times of around two years could save the commercial sector 15--20%, or $10--$15 billion per year. This project was initially intended to evaluate the feasibility of performing commercial energy audits as an adjunct to the industrial audit program run by the US Department of Energy Industrial Office. This program is housed in 30 universities throughout the United States. Formerly known as Energy Analysis and Diagnostic Centers (EADC`s), the university programs are now called Industrial Assessment Centers (IAC`s) to reflect their expansion from energy use analyses to include waste and productivity analyses. The success of the EADC/IAC program in helping the manufacturing sector provides an excellent model for a similar program in the commercial buildings sector. This project has investigated using the EADC/IAC approach to performing energy audits for the commercial sector, and has determined that such an approach is feasible and cost effective.

  9. Electricity generation sectors under purchase obligation: support arrangement analysis

    International Nuclear Information System (INIS)

    2013-04-01

    This report aims at assessing the operation of the support arrangement by which currently benefit some electricity production sectors in France (renewable energies, co-generation) with respect to the evolution of the energy mix within the frame of energy transition. Other support arrangements presently adopted in Europe are also addressed as lessons to be learned. Criteria are established for any support arrangement. The report presents the French and European context regarding such support arrangement with purchasing obligation, and addresses the future evolutions of the European Commission. It highlights challenges for the electric system and for the energy market (impact on investments, optimization of market operation), describes and assesses the French purchasing obligation arrangement, and describes and assesses other existing support arrangements

  10. Análisis del fracaso empresarial por sectores: factores diferenciadores = Cross-industry analysis of business failure: differential factors

    Directory of Open Access Journals (Sweden)

    María Jesús Mures Quintana

    2012-12-01

    Full Text Available El objetivo de este trabajo se centra en el análisis del fracaso empresarial por sectores, a fin de identificar los factores explicativos y predictivos de este fenómeno que son diferentes en tres de los principales sectores que se distinguen en toda economía: industria, construcción y servicios. Para cada uno de estos sectores, seguimos el mismo procedimiento. En primer lugar, aplicamos un análisis de componentes principales con el que identificamos los factores explicativos del fracaso empresarial en los tres sectores. A continuación, consideramos dichos factores como variables independientes en un análisis discriminante, que aplicamos para predecir el fracaso de una muestra de empresas, utilizando no sólo información financiera en forma de ratios, sino también otras variables no financieras relativas a las empresas, así como información externa a las mismas que refleja las condiciones macroeconómicas bajo las que desarrollan su actividad. This paper focuses on a cross-industry analysis of business failure, in order to identify the explanatory and predictor factors of this event that are different in three of the main industries in every economy: manufacturing, building and service. For each one of these industries, the same procedure is followed. First, a principal components analysis is applied in order to identify the explanatory factors of business failure in the three industries. Next, these factors are considered as independent variables in a discriminant analysis, so as to predict the firms’ failure, using not only financial information expressed by ratios, but also other non-financial variables related to the firms, as well as external information that reflects macroeconomic conditions under which they develop their activity.

  11. Physical analysis of some features of the gauge theories with Higgs sectors

    International Nuclear Information System (INIS)

    Beshtoev, Kh.M.

    1995-01-01

    A physical analysis of some features of the gauge theories with Higgs sectors is made. It is shown that we should assume gauge transformations in the fermion and Higgs sectors to be different (i.e., to have different charges) in order to remove contradictions arising in gauge theories with Higgs sectors. Then, the Higgs mechanism can be interpreted as some mechanism of gauge field shielding. In such a mechanism fermions remain without masses. The conclusion is made that in the standard theory of the development of the Universe, monopoles cannot survive at low temperatures. 15 refs

  12. The fabrication of steam generators. Situation and predictions 2017 and 2018 - Sectoral and competitive analysis

    International Nuclear Information System (INIS)

    2017-01-01

    This report proposes a situational analysis and a discussion of trends for the sector of fabrication of steam generators. It also proposes predictions for 2017 and 2018, and all important figures useful to analyse the sector and its market. It discusses positions of the different actors, and the competitive game between them. Key events in firms life are indicated, and key development axes are identified. The report also proposes a ranking, a presentation of financial performance, and synthetic sheets for 55 leader firms of the sector

  13. Evaluation on the efficiency of the construction sector companies in Malaysia with data envelopment analysis model

    Science.gov (United States)

    Weng Hoe, Lam; Jinn, Lim Shun; Weng Siew, Lam; Hai, Tey Kim

    2018-04-01

    In Malaysia, construction sector is essential parts in driving the development of the Malaysian economy. Construction industry is an economic investment and its relationship with economic development is well posited. However, the evaluation on the efficiency of the construction sectors companies listed in Kuala Lumpur Stock Exchange (KLSE) with Data Analysis Envelopment (DEA) model have not been actively studied by the past researchers. Hence the purpose of this study is to examine the financial performance the listed construction sectors companies in Malaysia in the year of 2015. The results of this study show that the efficiency of construction sectors companies can be obtained by using DEA model through ratio analysis which defined as the ratio of total outputs to total inputs. This study is significant because the inefficient companies are identified for potential improvement.

  14. INNOVATIVE ERP APPLICATIONS IN THE PUBLIC SECTOR: A COMPARATIVE ANALYSIS OF NEW ZEALAND EXPERIENCE

    Directory of Open Access Journals (Sweden)

    A. Sknar

    2015-10-01

    Full Text Available Contemporary economic science is looking for ways of research actualisation to resolve the challenges under the world financial crisis. Besides existing challenges in private de-regulated sector, one of the efficient innovations can be found in broadening ERP applications in the Public Sector. This paper approaches to the ERP applications mainly from the economical rather than from technical perspective. Comparative analysis of New Zealand public sector is supported by relevant international practical experience (implementations, and by core fundamental analysis of economical nature of business processes used by public entities. The key advantage (based on a historical timeline comes from a full integration of financial scope and operational activities. Using the example of ERP (as one of the drivers of productivity and performance improvement, the paper is aiming to underline how to bring the best practice and technology (data management and logical architecture from the private sector into the public sphere.

  15. ECONOMIC AND FINANCIAL ANALYSIS OF THE BUILDINGS REHABILITATION SOLUTIONS

    Directory of Open Access Journals (Sweden)

    STAN IVAN F.E.

    2016-07-01

    Full Text Available The paper includes a simplified economical and financial analysis of the buildings rehabilitation solutions, for heating and lighting. The most important economic and financial indicators analyzed and determined are: economic return on investment and payback period of investment in dynamic form, net present value, and internal rate of return economic residual value of the investment on thermal insulation, building maintenance costs, energy costs. In order to reduce the electricity consumption: the methods consisted in replacing inefficient lighting with some efficient energy and for heat consumption: the proposed solution was building rehabilitation (exterior wall insulation, floor insulation board. The analysis consists in determining the economical and financial indicators before and after the building rehabilitation. The 3 rooms apartment is located in Craiova town, (wind zone IV, 2nd floor, orientation is S.

  16. Building America Performance Analysis Procedures: Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    None

    2004-06-01

    To measure progress toward multi-year research goals, cost and performance trade-offs are evaluated through a series of controlled field and laboratory experiments supported by energy analysis techniques using test data to calibrate simulation models.

  17. Analysis of Thermal Comfort in an Intelligent Building

    Science.gov (United States)

    Majewski, Grzegorz; Telejko, Marek; Orman, Łukasz J.

    2017-06-01

    Analysis of thermal comfort in the ENERGIS Building, an intelligent building in the campus of the Kielce University of Technology, Poland is the focus of this paper. For this purpose, air temperature, air relative humidity, air flow rate and carbon dioxide concentration were measured and the mean radiant temperature was determined. Thermal sensations of the students occupying the rooms of the building were evaluated with the use of a questionnaire. The students used a seven-point scale of thermal comfort. The microclimate measurement results were used to determine the Predicted Mean Vote and the Predicted Percentage Dissatisfied indices.

  18. Changes in carbon intensity in China's industrial sector: Decomposition and attribution analysis

    International Nuclear Information System (INIS)

    Liu, Nan; Ma, Zujun; Kang, Jidong

    2015-01-01

    The industrial sector accounts for 70% of the total energy-related CO_2 emissions in China. To gain a better understanding of the changes in carbon intensity in China's industrial sector, this study first utilized logarithmic mean Divisia index (LMDI) decomposition analysis to disentangle the carbon intensity into three influencing factors, including the emission coefficient effect, the energy intensity effect, and the structure effect. Then, the analysis was furthered to explore the contributions of individual industrial sub-sectors to each factor by using an extension of the decomposition method proposed in Choi and Ang (2012). The results indicate that from 1996 to 2012, the energy intensity effect was the dominant factor in reducing carbon intensity, of which chemicals, iron and steel, metal and machinery, and cement and ceramics were the most representative sub-sectors. The structure effect did not show a strong impact on carbon intensity. The emission coefficient effect gradually increased the carbon intensity, mainly due to the expansion of electricity consumption, particularly in the metal and machinery and chemicals sub-sectors. The findings suggest that differentiated policies and measures should be considered for various industrial sub-sectors to maximize the energy efficiency potential. Moreover, readjusting the industrial structure and promoting clean and renewable energy is also urgently required to further reduce carbon intensity in China's industrial sector. - Highlights: • The study analyzed the changes in carbon intensity in China's industrial sector. • An extension of the Divisia index decomposition methodology was utilized. • Energy efficiency improvement was the dominant factor reducing carbon intensity. • The sub-sector contributions to the energy efficiency improvement varied markedly. • Emission coefficient growth can be mainly due to the expansion of electricity.

  19. Application of Sensitivity Analysis in Design of Sustainable Buildings

    DEFF Research Database (Denmark)

    Heiselberg, Per; Brohus, Henrik; Rasmussen, Henrik

    2009-01-01

    satisfies the design objectives and criteria. In the design of sustainable buildings, it is beneficial to identify the most important design parameters in order to more efficiently develop alternative design solutions or reach optimized design solutions. Sensitivity analyses make it possible to identify...... possible to influence the most important design parameters. A methodology of sensitivity analysis is presented and an application example is given for design of an office building in Denmark....

  20. Buildings Energy Efficiency: Interventions Analysis under a Smart Cities Approach

    Directory of Open Access Journals (Sweden)

    Gabriele Battista

    2014-07-01

    Full Text Available Most of the world’s population lives in urban areas and in inefficient buildings under the energy point of view. Starting from these assumptions, there is the need to identify methodologies and innovations able to improve social development and the quality of life of people living in cities. Smart cities can be a viable solution. The methodology traditionally adopted to evaluate building energy efficiency starts from the structure’s energy demands analysis and the demands reduction evaluation. Consequently, the energy savings is assessed through a cascade of interventions. Regarding the building envelope, the first intervention is usually related to the reduction of the thermal transmittance value, but there is also the need to emphasize the building energy savings through other parameters, such as the solar gain factor and dye solar absorbance coefficients. In this contribution, a standard building has been modeled by means of the well-known dynamic software, TRNSYS. This study shows a parametrical analysis through which it is possible to evaluate the effect of each single intervention and, consequently, its influence on the building energy demand. Through this analysis, an intervention chart has been carried out, aiming to assess the intervention efficiency starting from the percentage variation of energy demands.

  1. Intelligent analysis of energy consumption in school buildings

    International Nuclear Information System (INIS)

    Raatikainen, Mika; Skön, Jukka-Pekka; Leiviskä, Kauko; Kolehmainen, Mikko

    2016-01-01

    Highlights: • Electricity and heating energy consumptions of six school buildings were compared. • Complex multivariate data was analysed using modern computational methods. • Variation in electricity consumption cost is considerably low between study schools. • District heating variation is very slight in two new study schools. • District heating cost describes energy efficiency and state of building automation. - Abstract: Even though industry consumes nearly half of total energy production, the relative share of total energy consumption related to heating and operating buildings is growing constantly. The motivation for this study was to reveal the differences in electricity use and district heating consumption in school buildings of various ages during the working day and also during the night when human-based consumption is low. The overall aim of this study is to compare the energy (electricity and heating) consumption of six school buildings in Kuopio, Eastern Finland. The selected school buildings were built in different decades, and their ventilation and building automation systems are also inconsistent. The hourly energy consumption data was received from Kuopion Energia, the local energy supply company. In this paper, the results of data analysis on the energy consumption in these school buildings are presented. Preliminary results show that, generally speaking, new school buildings are more energy-efficient than older ones. However, concerning energy efficiency, two very new schools were exceptional because ventilation was on day and night in order to dry the building materials in the constructions. The novelty of this study is that it makes use of hourly smart metering consumption data on electricity and district heating, using modern computational methods to analyse complex multivariate data in order to increase knowledge of the buildings’ consumption profiles and energy efficiency.

  2. End-use energy analysis in the Malaysian industrial sector

    Energy Technology Data Exchange (ETDEWEB)

    Saidur, R.; Masjuki, H.H. [Department of Mechanical Engineering, University of Malaya, 50603 Kuala Lumpur (Malaysia); Rahim, N.A.; Mekhilef, S.; Ping, H.W. [Department of Electrical Engineering, University of Malaya, 50603 Kuala Lumpur (Malaysia); Jamaluddin, M.F. [Tenaga Nasional Berhad (TNB), Head Office, Bangsar, Kuala Lumpur (Malaysia)

    2009-02-15

    The industrial sector is the second largest consumer of energy in Malaysia. In this energy audit, the most important parameters that have been collected are as follows: power rating and operation time of energy-consuming equipments/machineries; fossil fuel and other sources of energy use; production figure; peak and off-peak tariff usage behavior and power factor. These data were then analyzed to investigate the breakdown of end-use equipments/machineries energy use, the peak and off-peak usage behavior, power factor trend and specific energy use. The results of the energy audit showed that the highest electrical energy-using equipment was an electric motor followed by pumps and air compressors. The specific energy use has been estimated and compared with four Indonesian industries and it was found that three Malaysian industries were more efficient than the Indonesian counterpart. The study also found that about 64% electrical energy was used in peak hours by the industries and the average power factor ranged from 0.88 to 0.92. The study also estimated energy and bill savings using highly efficient electrical motors along with the payback period. (author)

  3. Evaluating the need for economic support policies in promoting greenhouse gas emission reduction measures in the building sector: The case of Greece

    International Nuclear Information System (INIS)

    Georgopoulou, E.; Sarafidis, Y.; Mirasgedis, S.; Balaras, C.A.; Gaglia, A.; Lalas, D.P.

    2006-01-01

    During the last decade the CO 2 emissions from the residential and tertiary sectors have been rising continuously. This is cause for concern but also an area to be targeted for emission reduction measures in national action plans. This paper proposes a methodological framework, using the Greek building sector (characterized by an aging building stock constructed mostly in the period before 1980) as a case study for the examination of the economic attractiveness of possible measures, which incorporates crucial parameters such as local climate, use of buildings, age of building stock, etc. that affect the energy conservation potential and consequently the economic performance of available measures. Utilizing this framework, the approach is able to classify measures into three categories, namely 'win-win' cases (i.e. where the implementation of emission reduction measures presents a net economic benefit for end-users), measures that require the implementation of appropriate economic support policies in order to make them economically attractive for end-users, and measures that have excessive cost. The results indicate that the emissions reduction potential of 'win-win' cases is significant. They also demonstrate how individual measures can provide significant reductions if carefully targeted economic support policies are applied. Finally, sensitivity analyses performed with respect to the discount rate applied indicate that it has a substantial impact on the economic performance of some measures and consequently on the magnitude of the 'win-win' potential associated to emissions reduction

  4. ResStock Analysis Tool | Buildings | NREL

    Science.gov (United States)

    Energy and Cost Savings for U.S. Homes Contact Eric Wilson to learn how ResStock can benefit your approach to large-scale residential energy analysis by combining: Large public and private data sources uncovered $49 billion in potential annual utility bill savings through cost-effective energy efficiency

  5. ANALYSIS RESULTS FOR BUILDING 241 702-AZ A TRAIN

    Energy Technology Data Exchange (ETDEWEB)

    DUNCAN JB; FRYE JM; COOKE CA; LI SW; BROCKMAN FJ

    2006-12-13

    This report presents the analyses results for three samples obtained under RPP-PLAN-28509, Sampling and Analysis Plan for Building 241 702-AZ A Train. The sampling and analysis was done in response to problem evaluation request number PER-2004-6139, 702-AZ Filter Rooms Need Radiological Cleanup Efforts.

  6. Safety analysis of the nuclear chemistry Building 151

    International Nuclear Information System (INIS)

    Kvam, D.

    1984-01-01

    This report summarizes the results of a safety analysis that was done on Building 151. The report outlines the methodology, the analysis, and the findings that led to the low hazard classification. No further safety evaluation is indicated at this time. 5 tables

  7. ANALYSIS RESULTS FOR BUILDING 241 702-AZ A TRAIN

    International Nuclear Information System (INIS)

    DUNCAN JB; FRYE JM; COOKE CA; LI SW; BROCKMAN FJ

    2006-01-01

    This report presents the analyses results for three samples obtained under RPP-PLAN-28509, Sampling and Analysis Plan for Building 241 702-AZ A Train. The sampling and analysis was done in response to problem evaluation request number PER-2004-6139, 702-AZ Filter Rooms Need Radiological Cleanup Efforts

  8. A Comparative Study on Seismic Analysis of Bangladesh National Building Code (BNBC) with Other Building Codes

    Science.gov (United States)

    Bari, Md. S.; Das, T.

    2013-09-01

    Tectonic framework of Bangladesh and adjoining areas indicate that Bangladesh lies well within an active seismic zone. The after effect of earthquake is more severe in an underdeveloped and a densely populated country like ours than any other developed countries. Bangladesh National Building Code (BNBC) was first established in 1993 to provide guidelines for design and construction of new structure subject to earthquake ground motions in order to minimize the risk to life for all structures. A revision of BNBC 1993 is undergoing to make this up to date with other international building codes. This paper aims at the comparison of various provisions of seismic analysis as given in building codes of different countries. This comparison will give an idea regarding where our country stands when it comes to safety against earth quake. Primarily, various seismic parameters in BNBC 2010 (draft) have been studied and compared with that of BNBC 1993. Later, both 1993 and 2010 edition of BNBC codes have been compared graphically with building codes of other countries such as National Building Code of India 2005 (NBC-India 2005), American Society of Civil Engineering 7-05 (ASCE 7-05). The base shear/weight ratios have been plotted against the height of the building. The investigation in this paper reveals that BNBC 1993 has the least base shear among all the codes. Factored Base shear values of BNBC 2010 are found to have increased significantly than that of BNBC 1993 for low rise buildings (≤20 m) around the country than its predecessor. Despite revision of the code, BNBC 2010 (draft) still suggests less base shear values when compared to the Indian and American code. Therefore, this increase in factor of safety against the earthquake imposed by the proposed BNBC 2010 code by suggesting higher values of base shear is appreciable.

  9. Assessing National Employment Impacts of Investment in Residential and Commercial Sector Energy Efficiency: Review and Example Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, David M.; Belzer, David B.; Livingston, Olga V.; Scott, Michael J.

    2014-06-18

    Pacific Northwest National Laboratory (PNNL) modeled the employment impacts of a major national initiative to accelerate energy efficiency trends at one of two levels: • 15 percent savings by 2030. In this scenario, efficiency activities save about 15 percent of the Annual Energy Outlook (AEO) Reference Case electricity consumption by 2030. It is assumed that additional energy savings in both the residential and commercial sectors begin in 2015 at zero, and then increase in an S-shaped market penetration curve, with the level of savings equal to about 7.0 percent of the AEO 2014 U.S. national residential and commercial electricity consumption saved by 2020, 14.8 percent by 2025, and 15 percent by 2030. • 10 percent savings by 2030. In this scenario, additional savings begin at zero in 2015, increase to 3.8 percent in 2020, 9.8 percent by 2025, and 10 percent of the AEO reference case value by 2030. The analysis of the 15 percent case indicates that by 2030 more than 300,000 new jobs would likely result from such policies, including an annual average of more than 60,000 jobs directly supporting the installation and maintenance of energy efficiency measures and practices. These are new jobs resulting initially from the investment associated with the construction of more energy-efficient new buildings or the retrofit of existing buildings and would be sustained for as long as the investment continues. Based on what is known about the current level of building-sector energy efficiency jobs, this would represent an increase of more than 10 percent from the current estimated level of over 450,000 such jobs. The more significant and longer-lasting effect comes from the redirection of energy bill savings toward the purchase of other goods and services in the general economy, with its attendant influence on increasing the total number of jobs. This example analysis utilized PNNL’s ImSET model, a modeling framework that PNNL has used over the past two decades to assess

  10. Social firms: building cross-sectoral partnerships to create employment opportunity and supportive workplaces for people with mental illness.

    Science.gov (United States)

    Paluch, Tamar; Fossey, Ellie; Harvey, Carol

    2012-01-01

    A major barrier to employment for people with mental illness is limited access to supportive and non-discriminatory workplaces. Social firms are businesses committed to employing up to 50% of people with a disability or other disadvantage and to providing supportive work environments that benefit workers. Little research has been conducted to understand the features and social processes that support the vocational experiences of employees with mental health issues in social firms. This ethnographic study sought to explore the experiences of nine employees at one Australian social firm. Nine employees of a social firm, with and without mental illness. Study methods used included participant observation, interviewing and document analysis. The study highlights the complexity of running a socially-invested business, and the importance of cross-sectoral partnerships to support their operational success. Natural workplace supports, adequate training and support infrastructure and enabling participation in the business, were identified as important to creating a supportive workplace. Partnerships within the workplace and in support of the workplace are discussed. Future growth and development of partnerships are recommended to support the establishment of social firms.

  11. Nuclear Futures Analysis and Scenario Building

    International Nuclear Information System (INIS)

    Arthur, E.D.; Beller, D.; Canavan, G.H.; Krakowski, R.A.; Peterson, P.; Wagner, R.L.

    1999-01-01

    This LDRD project created and used advanced analysis capabilities to postulate scenarios and identify issues, externalities, and technologies associated with future ''things nuclear''. ''Things nuclear'' include areas pertaining to nuclear weapons, nuclear materials, and nuclear energy, examined in the context of future domestic and international environments. Analysis tools development included adaptation and expansion of energy, environmental, and economics (E3) models to incorporate a robust description of the nuclear fuel cycle (both current and future technology pathways), creation of a beginning proliferation risk model (coupled to the (E3) model), and extension of traditional first strike stability models to conditions expected to exist in the future (smaller force sizes, multipolar engagement environments, inclusion of actual and latent nuclear weapons (capability)). Accomplishments include scenario development for regional and global nuclear energy, the creation of a beginning nuclear architecture designed to improve the proliferation resistance and environmental performance of the nuclear fuel cycle, and numerous results for future nuclear weapons scenarios

  12. Energy consumption quota of public buildings based on statistical analysis

    International Nuclear Information System (INIS)

    Zhao Jing; Xin Yajuan; Tong Dingding

    2012-01-01

    The establishment of building energy consumption quota as a comprehensive indicator used to evaluate the actual energy consumption level is an important measure for promoting the development of building energy efficiency. This paper focused on the determination method of the quota, and firstly introduced the procedure of establishing energy consumption quota of public buildings including four important parts: collecting data, classifying and calculating EUIs, standardizing EUIs, determining the measure method of central tendency. The paper also illustrated the standardization process of EUI by actual calculation based on the samples of 10 commercial buildings and 19 hotel buildings. According to the analysis of the frequency distribution of standardized EUIs of sample buildings and combining the characteristics of each measure method of central tendency, comprehensive application of mode and percentage rank is selected to be the best method for determining the energy consumption quota of public buildings. Finally the paper gave some policy proposals on energy consumption quota to help achieve the goal of further energy conservation. - Highlights: ► We introduce the procedure of determining energy consumption quota (ECQ). ► We illustrate the standardization process of EUI by actual calculation of samples. ► Measures of central tendency are brought into determine the ECQ. ► Comprehensive application of mode and percentage rank is the best method for ECQ. ► Punitive or incentive measures for ECQ are proposed.

  13. Changes of energy-related GHG emissions in China: An empirical analysis from sectoral perspective

    International Nuclear Information System (INIS)

    Xu, Xianshuo; Zhao, Tao; Liu, Nan; Kang, Jidong

    2014-01-01

    Highlights: • We analyzed the factors impacting China’s emissions from a sectoral perspective. • Sector-specific policies and measures for emissions mitigation were evaluated. • Economic growth dominantly increased the emissions in the economic sectors. • Energy intensity decrease primarily reduced the emissions in the economic sectors. • Residential emissions growth was mainly driven by increase in per-capita energy use. - Abstract: In order to better understand sectoral greenhouse gas (GHG) emissions in China, this study utilized a logarithmic mean Divisia index (LMDI) decomposition analysis to study emission changes from a sectoral perspective. Based on the decomposition results, recently implemented policies and measures for emissions mitigation in China were evaluated. The results show that for the economic sectors, economic growth was the dominant factor in increasing emissions from 1996 to 2011, whereas the decline in energy intensity was primarily responsible for the emission decrease. As a result of the expansion of industrial development, economic structure change also contributed to growth in emissions. For the residential sector, increased emissions were primarily driven by an increase in per-capita energy use, which is partially confirmed by population migration. For all sectors, the shift in energy mix and variation in emission coefficient only contributed marginally to the emissions changes. The decomposition results imply that energy efficiency policy in China has been successful during the past decade, i.e., Top 1000 Priorities, Ten-Key Projects programs, the establishment of fuel consumption limits and vehicle emission standards, and encouragement of efficient appliances. Moreover, the results also indicate that readjusting economic structure and promoting clean and renewable energy is urgently required in order to further mitigate emissions in China

  14. Towards a Very Low Energy Building Stock: Modeling the U.S. Commercial Building Sector to Support Policy and Innovation Planning

    Energy Technology Data Exchange (ETDEWEB)

    Coffey, Brian; Borgeson, Sam; Selkowitz, Stephen; Apte, Josh; Mathew, Paul; Haves, Philip

    2009-07-01

    This paper describes the origin, structure and continuing development of a model of time varying energy consumption in the US commercial building stock. The model is based on a flexible structure that disaggregates the stock into various categories (e.g. by building type, climate, vintage and life-cycle stage) and assigns attributes to each of these (e.g. floor area and energy use intensity by fuel type and end use), based on historical data and user-defined scenarios for future projections. In addition to supporting the interactive exploration of building stock dynamics, the model has been used to study the likely outcomes of specific policy and innovation scenarios targeting very low future energy consumption in the building stock. Model use has highlighted the scale of the challenge of meeting targets stated by various government and professional bodies, and the importance of considering both new construction and existing buildings.

  15. Rings and sector : intrasite spatial analysis of stone age sites

    NARCIS (Netherlands)

    Stapert, Durk

    1992-01-01

    This thesis deals with intrasite spatial analysis: the analysis of spatial patterns on site level. My main concern has been to develop a simple method for analysing Stone Age sites of a special type: those characterised by the presence of a hearth closely associated in space with an artefact

  16. Comparative Analysis of Levels of Banking Sector Markets Concentration in CEE Region

    Directory of Open Access Journals (Sweden)

    Kaličanin Tijana

    2016-06-01

    Full Text Available Banking sector is an important development factor of the total financial and economic system. Number of banks and dispersion of their individual shares defines competitive structure of banking sector, manifested by its concentration. Market concentration may be presented as a function of a number of enterprises competing in a market and their individual comparative market shares. Concentration analysis is significant with regard to the fact that the level of concentration demonstrates relations among competitors in a market, as well as influence each competitor has on consumers, branch and economy as a whole. Starting from 2008 crisis, domino effect of which hit banking sector and has had a huge impact on it, authors of this paper aimed at establishing a level of market concentration of the banking sector in Serbia and countries in the region in 2015 by application of a large number of market concentration indicators.

  17. Input-output analysis of CO2 emissions embodied in trade. The effects of sector aggregation

    International Nuclear Information System (INIS)

    Su, Bin; Huang, H.C.; Ang, B.W.; Zhou, P.

    2010-01-01

    Energy-related CO 2 emissions embodied in international trade have been widely studied by researchers using the input-output analysis framework. These studies are often conducted at a specific level of sector aggregation and the choice made to a large extent is dictated by economic and energy data availability. We investigate analytically the possible effects of sector aggregation on the study results. We conduct empirical studies using the data of China and Singapore where energy-related CO 2 emissions embodied in their exports are estimated at different levels of sector aggregation. A finding from the studies is that levels around 40 sectors appear to be sufficient to capture the overall share of emissions embodied in a country's exports. Another finding is that in approximating the 'ideal' situation the hybrid data treatment approach produces better results than the uniformly distributed data treatment approach. Other findings and some recommendations are also presented. (author)

  18. THE ANALYSIS OF COMPETITIVENESS IN THE TOURISM SECTOR IN THE ACTUAL CONTEXT OF ECONOMIC CRISIS

    Directory of Open Access Journals (Sweden)

    Vasile ROBU

    2009-06-01

    Full Text Available The past few years have witnessed many storms in the Tourism sector. Under the influence of an extremely volatile world economy (financial crisis, commodity and oil price rises, sharp exchange rate fluctuations, increase terrorism acts in several region with tourism potential Tourism demand slowed significantly. Yet, despite the current difficulties, the Tourism sector remains a critical economic sector worldwide and one that provides significant potential for economic growth and development internationally. A growing national Tourism sector contributes to raises national income, employment, and can improve a country's balance of payments. The sector is thus an important driver of growth and prosperity and,  within developing countries, it can play a leading role in poverty reduction. Despite the overall importance of developing the Tourism sector, many obstacles at the national level continue to hinder its development. This analysis aims to serve two purposes. First, we intend to provide useful comparative information for making decisions related to business and tourism development. Second, and more importantly, we hope that the analysis provides an opportunity for the Tourism industry to highlight the obstacles to Tourism competitiveness.

  19. Critical analysis of procurement techniques in construction management sectors

    Science.gov (United States)

    Tiwari, Suman Tiwari Suresh; Chan, Shiau Wei; Faraz Mubarak, Muhammad

    2018-04-01

    Over the last three decades, numerous procurement techniques have been one of the highlights of the Construction Management (CM) for ventures, administration contracting, venture management as well as design and construct. Due to the development and utilization of those techniques, various researchers have explored the criteria for their choice and their execution in terms of time, cost and quality. Nevertheless, there is a lack of giving an account on the relationship between the procurement techniques and the progressed related issues, for example, supply chain, sustainability, innovation and technology development, lean construction, constructability, value management, Building Information Modelling (BIM) as well as e-procurement. Through chosen papers from the reputable CM-related academic journals, the specified scopes of these issues are methodically assessed with the objective to explore the status and trend in procurement related research. The result of this paper contributes theoretically as well as practically to the researchers and industrialist in order to be aware and appreciate the development of procurement techniques.

  20. From Principle to Action. An Analysis of the Financial Sector's Approach to Addressing Climate Change

    International Nuclear Information System (INIS)

    Mudde, P.; Abadie, A.

    2008-05-01

    The Ministry of the Housing, Spatial Planning and the Environment of the Netherlands (VROM), has taken the initiative to commission a study to determine best practice approaches within the financial sector regarding climate change. This study focuses on the indirect climate change footprint of the financial sector, i.e. the impact of the financial sector's clients on climate change. The study sets out to further the body of knowledge relating to the financial sector's approach to understanding and managing the effects of climate change on their clients' business. Specifically, it offers recommendations and potential next steps for both the financial sector and the Dutch government to enable a more focused and definitive approach to understanding, addressing and incorporating climate change considerations into decision-making procedures and policy development. The paper comprises the following analysis: Chapter 1 is an introduction describing why climate change is relevant to the financial sector, and introduces 18 financial institutions which were selected as the basis for the study. Chapter 2 elaborates on challenges for the financial sector regarding the incorporation of climate change considerations into enhanced risk analysis and decision making. Chapter 3 provides a comprehensive overview of the main international business initiatives regarding climate change and sustainability. It can be seen as a summary of Annex I to this report, which identifies which initiatives the 18 financial institutions are involved in. Chapter 4 highlights selected best practices amongst the 18 financial institutions assessed. Chapter 5 provides the main conclusions of the study and puts forward general and specific recommendations and potential next steps for the Dutch government and the financial sector. The Annexes contain fact sheets containing information about the climate change strategy and main activities of these organisations

  1. Benchmark Analysis of Institutional University Autonomy Higher Education Sectors in Denmark, Lithuania, Romania, Scotland and Sweden

    DEFF Research Database (Denmark)

    Turcan, Romeo V.; Bugaian, Larisa; Gulieva, Valeria

    2015-01-01

    This chapter consolidates the process and the findings from the four benchmark reports. It presents (i) the methodology and methods employed for data collection and data analysis; (ii) the comparative analysis of HE sectors and respective education systems in these countries; (iii) the executive ...

  2. Integration of the heat and refrigeration sector into the electricity market model PowerFlex for the analysis of sector encompasing effects on the climate protection goals and EE integration. Scientific final report - actualized version

    International Nuclear Information System (INIS)

    Koch, Matthias; Hesse, Tilman; Kenkmann, Tanja

    2017-01-01

    The report covers the following issues: (i) Detailed description of the heat sector and its coupling to the electricity sector within the electricity market model PowerFlex: provate heat demand, derivation of heat load profiles, development of a technology and energy carrier mix, data inputs for the electricity market regulation. (ii) Creation of an empirically based data basis for the air conditioning of building, its coupling to the electricity system and derivation of recommendations: preparation of a representative empirical determination of the status quo and the factors that provoke private households to install air conditions, effective parameters for the development of energy demand for air conditioning of residential homes, preparation of a data input for the electricity market model - methodology and results. (iii) Preparation of generic renewable energy supply time series with different levels of fluctuation: Methodology of the renewable energy profile calculation, calculation of the supply profile for photovoltaics, calculation of the supply profile for onshore wind and offshore wind. (iv) Extension of the electricity market model PowerFlex to PowerFlex-heat and cold for the sector encompassing scenario analysis: extension of the module to cogeneration power plants, power-to-heat and power-to-gas for the detailed description of the heat sector, extension of the module for load management, scenarios and interpretation of the results.

  3. Preparing a Safety Analysis Report using the building block approach

    International Nuclear Information System (INIS)

    Herrington, C.C.

    1990-01-01

    The credibility of the applicant in a licensing proceeding is severely impacted by the quality of the license application, particularly the Safety Analysis Report. To ensure the highest possible credibility, the building block approach was devised to support the development of a quality Safety Analysis Report. The approach incorporates a comprehensive planning scheme that logically ties together all levels of the investigation and provides the direction necessary to prepare a superior Safety Analysis Report

  4. An analysis of the Dutch service sector. Energy consumption and trends

    International Nuclear Information System (INIS)

    Ramirez, A.; Patel, M.; Blok, K.

    2002-09-01

    Energy efficiency and its implications for a decrease in carbon dioxide emissions have been a main force behind the current debate on energy issues. Until now, the attention of policy-makers and scientists has been mainly focused on the industrial and residential sectors, although the transport sector has gained relevance in the fast few years. The service sector, on the other hand, has remained at the bottom of the priority list. The main goal of this paper is to explore patterns of energy consumption and energy intensity in the Dutch service sector in the last 15 years. This paper is divided into two parts. The first part deals with developments for the whole sector, including a decomposition analysis, and the second part analyses sectoral developments for five sub-sectors: Wholesale and retail trade, hotels and restaurants; Financial institutes; Real estate renting and business activities; Education and Hospitals. At the aggregate level we have found a strong increase in energy consumption, especially in electricity. Furthermore, we found no evidence of significant decrease in energy intensity in the last decade. Furthermore, the decomposition analysis showed that (a) the activity effect (value added) has been the main driving force behind the increase of energy consumption of the service sector, (b) an increase in labour intensity has also boosted energy consumption and (c) energy intensity (in terms of energy per employee) did not have a significant role on decreasing energy use. At the subsectoral level the picture is blurred, especially due to the lack of good quality data. With exception of the sector Real estate renting and business activities which showed a decrease in energy intensity of about 20% between 1993 and 1999, the decrease in energy intensity is quite low. Hence, the results point towards a failure of actual energy policies to address the service sector. This is in contrast to the fact that, due to the high share of electricity consumption and

  5. Building-integrated renewable energy policy analysis in China

    Institute of Scientific and Technical Information of China (English)

    姚春妮; 郝斌

    2009-01-01

    With the dramatic development of renewable energy all over the world,and for purpose of adjusting energy structure,the Ministry of Construction of China plans to promote the large scale application of renewable energy in buildings. In order to ensure the validity of policy-making,this work firstly exerts a method to do cost-benefit analysis for three kinds of technologies such as building-integrated solar hot water (BISHW) system,building-integrated photovoltaic (BIPV) technology and ground water heat pump (GWHP). Through selecting a representative city of every climate region,the analysis comes into different results for different climate regions in China and respectively different suggestion for policy-making. On the analysis basis,the Ministry of Construction (MOC) and the Ministry of Finance of China (MOF) united to start-up Building-integrated Renewable Energy Demonstration Projects (BIREDP) in 2006. In the demonstration projects,renewable energy takes place of traditional energy to supply the domestic hot water,electricity,air-conditioning and heating. Through carrying out the demonstration projects,renewable energy related market has been expanded. More and more relative companies and local governments take the opportunity to promote the large scale application of renewable energy in buildings.

  6. Big data analysis framework for healthcare and social sectors in Korea.

    Science.gov (United States)

    Song, Tae-Min; Ryu, Seewon

    2015-01-01

    We reviewed applications of big data analysis of healthcare and social services in developed countries, and subsequently devised a framework for such an analysis in Korea. We reviewed the status of implementing big data analysis of health care and social services in developed countries, and strategies used by the Ministry of Health and Welfare of Korea (Government 3.0). We formulated a conceptual framework of big data in the healthcare and social service sectors at the national level. As a specific case, we designed a process and method of social big data analysis on suicide buzz. Developed countries (e.g., the United States, the UK, Singapore, Australia, and even OECD and EU) are emphasizing the potential of big data, and using it as a tool to solve their long-standing problems. Big data strategies for the healthcare and social service sectors were formulated based on an ICT-based policy of current government and the strategic goals of the Ministry of Health and Welfare. We suggest a framework of big data analysis in the healthcare and welfare service sectors separately and assigned them tentative names: 'health risk analysis center' and 'integrated social welfare service network'. A framework of social big data analysis is presented by applying it to the prevention and proactive detection of suicide in Korea. There are some concerns with the utilization of big data in the healthcare and social welfare sectors. Thus, research on these issues must be conducted so that sophisticated and practical solutions can be reached.

  7. Discriminant analysis in Polish manufacturing sector performance assessment

    Directory of Open Access Journals (Sweden)

    Józef Dziechciarz

    2004-01-01

    Full Text Available This is a presentation of the preliminary results of a larger project on the determination of the attractiveness of manufacturing branches. Results of the performance assessment of Polish manufacturing branches in 2000 (section D „Manufacturing” – based on NACE – Nomenclatures des Activites de Communite Europeene are shown. In the research, the classical (Fisher’s linear discriminant analysis technique was used for the analysis of the profit generation ability by the firms belonging to a certain production branch. For estimation, the data describing group level was used – for cross-validation, the classes data.

  8. Structural integrity analysis of an INPP building under external loading

    International Nuclear Information System (INIS)

    Dundulis, G.; Karalevicius, R.; Uspuras, E.; Kulak, R.F.; Marchertas, A.

    2005-01-01

    After the terrorist attacks in New York and Washington D. C. using civil airplanes, the evaluation of civil airplane crashes into civil and NPP structures has become very important. The interceptions of many terrorists' communications reveal that the use of commandeered commercial aircraft is still a major part of their plans for destruction. Aircraft crash or other flying objects in the territory of the Ignalina Nuclear Power Plant (INPP) represents a concern to the plant. Aircraft traveling at high velocity have a destructive potential. The aircraft crash may damage the roof and walls of buildings, pipelines, electric motors, cases of power supplies, power cables of electricity transmission and other elements and systems, which are important for safety. Therefore, the evaluation of the structural response to an of aircraft crash is important and was selected for analysis. The structural integrity analysis due to the effects of an aircraft crash on an NPP building structure is the subject of this paper. The finite element method was used for the structural analysis of a typical Ignalina NPP building. The structural integrity analysis was performed for a portion of the ALS using the dynamic loading of an aircraft crash impact model. The computer code NEPTUNE was used for this analysis. The local effects caused by impact of the aircraft's engine on the building wall were evaluated independently by using an empirical formula. (authors)

  9. Seismic analysis of a reactor building with eccentric layout

    International Nuclear Information System (INIS)

    Itoh, T.; Deng, D.Z.F.; Lui, K.

    1987-01-01

    Conventional design for a reactor building in a high seismic area has adopted an essentially concentric layout in response to fear of excessive torsional effect due to horizontal seismic load on an eccentric plant. This concentric layout requirement generally results in an inflexible arrangement of the plant facilities and thus increases the plant volume. This study is performed to investigate the effect of eccentricity on the overall seismic structural response and to provide technical information in this regard to substantiate the volume reduction of the overall power plant. The plant layout is evolved from the Bechtel standard plan of a PWR plant by integrating the reactor building and the auxiliary building into a combined building supported on a common basemat. This plant layout is optimized for volume utilization and to reduce the length of piping systems. The mass centers at various elevations of the combined building do not coincide with the rigidity center (RC) of the respective floor and the geometric center of the basemat, thus creating an eccentric response of the building in a seismic environment. Therefore, the torsional effects of the structure have to be taken into account in the seismic analysis

  10. Quantitative Analysis of Criteria in University Building Maintenance in Malaysia

    Directory of Open Access Journals (Sweden)

    Olanrewaju Ashola Abdul-Lateef

    2010-10-01

    Full Text Available University buildings are a significant part of university assets and considerable resources are committed to their design, construction and maintenance. The core of maintenance management is to optimize productivity and user satisfaction with optimum resources. An important segment in the maintenance management system is the analysis of criteria that influence building maintenance. Therefore, this paper aims to identify quantify, rank and discuss the criteria that influence maintenance costs, maintenance backlogs, productivity and user satisfaction in Malaysian university buildings. The paper reviews the related literature and presents the outcomes of a questionnaire survey. Questionnaires were administered on 50 university maintenance organizations. Thirty-one criteria were addressed to the university maintenance organizations to evaluate the degree to which each of the criteria influences building maintenance management. With a 66% response rate, it was concluded that the consideration of the criteria is critical to the university building maintenance management system. The quality of components and materials, budget constraints and the age of the building were found to be the most influential criteria but information on user performance satisfaction, problems associated with in-house workforce and shortage of materials and components were the least influential criteria. The paper also outlined that maintenance management is a strategic function in university administration.

  11. Dynamic analysis of auxiliary buildings in nuclear power plants

    International Nuclear Information System (INIS)

    Subramanian, K.V.; Madhava Rao, A.S.; Warudkar, A.S.

    1989-01-01

    All nuclear power plants have a large number of auxiliary buildings housing various services and control systems required for the operation of the plant. Illustrative examples are turbine building, control building, service building etc. These buildings are seismically qualified as Class I or Class II structures. Usually, these auxiliary buildings are of low rise type with two or three floors and floor heights varying from five to eight meters and of framed construction in steel or concrete or a combination of both the materials. The floors are usually staggered with large cutouts and may not extend over the full area in plan. Some of the bays are often of double story height with the columns continuous over a story in order to accommodate cranes and other equipment. The structural elements supporting the roof may consist of steel roof trusses instead of beams. The seismic analysis of these structures involves the formulation of the analytical model that can simulate the physical behavior of the structure as close as possible taking into consideration the practical aspects. The criteria adopted to formulate the mathematical model has an important bearing on the evaluated dynamic characteristics and seismic response

  12. Macroergonomic analysis of an assembly sector of a furniture company.

    Science.gov (United States)

    Cristiane, A A Z; Danielle, M D; Vanessa, C B

    2012-01-01

    From of Macroergonomic Analysis of Work were diagnosed the main ergonomics demands in a furniture company in the city of Cambé, Paraná. Through this method we could identify the most problematic points of the analyzed environment for posterior solutions of improvement with the objective of increasing the working and psychological quality of the employees, motivating their good performance and satisfaction.

  13. Engendering mobility: towards improved gender analysis in the transport sector

    CSIR Research Space (South Africa)

    Venter, C

    2006-01-01

    Full Text Available It is the purpose of this chapter to advance the discourse between gender analysis and transport, specifically within the urban development context, with a view to promoting an understanding of the strategic role of transport, access and mobility...

  14. Analysis of Market Concentration in Selected Sectors of Public Procurement

    Directory of Open Access Journals (Sweden)

    Petr Svoboda

    2016-01-01

    Full Text Available The goal of this article is the analysis of influence of market concentration in selected areas of public procurement on chosen parameters of public procurement in years 2007 and 2011. Five concentration ratios and five parameters of contracts are calculated for each of five chosen areas of public tenders in 2007 and 2011. After this task, the correlation analysis between concentration ratios and parameters of contracts is done for finding out mutual relation between these two variables. Correlation analysis is then compared with four created hypotheses about the relationship between market concentration and parameters of public procurement The results of the analysis are surprising, because in most cases, the stated hypotheses were rejected, meaning that the correlations between the parameters of public procurement and market concentration were different than this study predicted based on economic theory. The possible reasons for this result, discussed in the article, are corruption and also poor quality of data from Information system of public procurement administered by the Ministry for Regional Development of Czech Republic.

  15. A multifractal detrended fluctuation analysis of financial market efficiency: Comparison using Dow Jones sector ETF indices

    Science.gov (United States)

    Tiwari, Aviral Kumar; Albulescu, Claudiu Tiberiu; Yoon, Seong-Min

    2017-10-01

    This study challenges the efficient market hypothesis, relying on the Dow Jones sector Exchange-Traded Fund (ETF) indices. For this purpose, we use the generalized Hurst exponent and multifractal detrended fluctuation analysis (MF-DFA) methods, using daily data over the timespan from 2000 to 2015. We compare the sector ETF indices in terms of market efficiency between short- and long-run horizons, small and large fluctuations, and before and after the global financial crisis (GFC). Our findings can be summarized as follows. First, there is clear evidence that the sector ETF markets are multifractal in nature. We also find a crossover in the multifractality of sector ETF market dynamics. Second, the utilities and consumer goods sector ETF markets are more efficient compared with the financial and telecommunications sector ETF markets, in terms of price prediction. Third, there are noteworthy discrepancies in terms of market efficiency, between the short- and long-term horizons. Fourth, the ETF market efficiency is considerably diminished after the global financial crisis.

  16. The mineral sector and economic development in Ghana: A computable general equilibrium analysis

    Science.gov (United States)

    Addy, Samuel N.

    A computable general equilibrium model (CGE) model is formulated for conducting mineral policy analysis in the context of national economic development for Ghana. The model, called GHANAMIN, places strong emphasis on production, trade, and investment. It can be used to examine both micro and macro economic impacts of policies associated with mineral investment, taxation, and terms of trade changes, as well as mineral sector performance impacts due to technological change or the discovery of new deposits. Its economywide structure enables the study of broader development policy with a focus on individual or multiple sectors, simultaneously. After going through a period of contraction for about two decades, mining in Ghana has rebounded significantly and is currently the main foreign exchange earner. Gold alone contributed 44.7 percent of 1994 total export earnings. GHANAMIN is used to investigate the economywide impacts of mineral tax policies, world market mineral prices changes, mining investment, and increased mineral exports. It is also used for identifying key sectors for economic development. Various simulations were undertaken with the following results: Recently implemented mineral tax policies are welfare increasing, but have an accompanying decrease in the output of other export sectors. World mineral price rises stimulate an increase in real GDP; however, this increase is less than real GDP decreases associated with price declines. Investment in the non-gold mining sector increases real GDP more than investment in gold mining, because of the former's stronger linkages to the rest of the economy. Increased mineral exports are very beneficial to the overall economy. Foreign direct investment (FDI) in mining increases welfare more so than domestic capital, which is very limited. Mining investment and the increased mineral exports since 1986 have contributed significantly to the country's economic recovery, with gold mining accounting for 95 percent of the

  17. AN ANALYSIS OF THE INEQUALITIES BETWEEN THE PUBLIC AND PRIVATE SECTOR IN SOUTH AFRICA.

    Science.gov (United States)

    Dell, A J; Kahn, D; Klopper, J

    2017-06-01

    The full extent of the global burden of surgical disease is largely unknown; however, the scope of the problem is thought to be large. Despite the substantial burden of surgical disease, surgical services are inaccessible to many of those who need them most. There are disparities between public and private sectors in South Africa, which compounds inequitable access to surgical care. This study involved a descriptive analysis of surgical resources and included the total number of hospitals, hospital beds, surgical beds, general surgeons (specialist and nonspecialist), and the number of functional operating theatres in South Africa. A comparison was performed between the public sector resources per uninsured population and private sector resources per insured population. Hospitals were contacted during the period 01 October 2014 to 31 December 2014. Surgical resources were concentrated in metropolitan areas of urban provinces. There were striking differences between sectors when a comparison was made between patients with and without health insurance. Private resources were comparable to those available in high income countries (HICs) and were accessible to only 16% of South Africans. Improving access to surgical services in lower middle income countries (LMICs) requires addressing gaps between the public and private sector regarding infrastructure, personnel, as well as equipment. South Africa is unique in that although it is classified as an upper middle income country (UMIC), it comprises of two sectors; a public sector which has resources similar to other LMICs, and a private sector which has resources similar to HICs. These data identified disparities between geographic regions which may be contributing to ongoing inequity in South Africa, and by doing so allows for evidence-based planning towards improving surgical infrastructure and workforce.

  18. The liberalization of the European gas sector and the strategic positioning of firms: A dynamic approach for corporate competence building

    International Nuclear Information System (INIS)

    Avadikyan, A.; Amesse, F.; Cohendet, P.; Heraud, J-A.

    2002-01-01

    A framework to explain how competitive changes occurring in one sector can affect both the dynamics of required competencies and the frontiers with adjacent sectors is proposed. When applied to the natural gas sector, the results provide a better understanding of how competencies in the sector evolve according to the new market structure and the strategic movements engaged in by the different players. The proposed framework combines the two approaches -- evolution and strategy -- to show that a firm's competencies define both membership in a specific sector and its distinctiveness from its competitors. To define the strategic positioning process the concept of core competencies is introduced, i.e. competencies developed by firms through their specific history which, when combined in a specific manner with new competencies could give them sustainable competitive advantage. Finally, the authors explain the concept of dynamic capabilities, which rely on a set of organizational and strategic processes needed to integrate, develop and create new competencies in order to initiate, or to adapt to market changes. The final conclusion is that the recent liberalization of the European gas and power sectors weakened institutional entry barriers, a phenomenon which compelled operators traditionally protected by regional or national monopolies to compete with other potential actors. With specific reference to the gas, power and oil industries it is stated that if they had relatively clear frontiers in the past, these frontiers have now become increasingly permeable. However, this weakening of institutional barriers has a beneficial consequence: it allows companies to deploy strategies to take advantage of new growth and rent appropriation opportunities. Examples of adaptation by European oil companies, power companies and natural gas firms are used to illustrate the principles embodied in the proposed framework. 18 refs., 1 fig

  19. Sensitivity Analysis Applied in Design of Low Energy Office Building

    DEFF Research Database (Denmark)

    Heiselberg, Per; Brohus, Henrik

    2008-01-01

    satisfies the design requirements and objectives. In the design of sustainable Buildings it is beneficial to identify the most important design parameters in order to develop more efficiently alternative design solutions or reach optimized design solutions. A sensitivity analysis makes it possible...

  20. Application of Sensitivity Analysis in Design of Sustainable Buildings

    DEFF Research Database (Denmark)

    Heiselberg, Per; Brohus, Henrik; Hesselholt, Allan Tind

    2007-01-01

    satisfies the design requirements and objectives. In the design of sustainable Buildings it is beneficial to identify the most important design parameters in order to develop more efficiently alternative design solutions or reach optimized design solutions. A sensitivity analysis makes it possible...

  1. 76 FR 57982 - Building Energy Codes Cost Analysis

    Science.gov (United States)

    2011-09-19

    ... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy [Docket No. EERE-2011-BT-BC-0046] Building Energy Codes Cost Analysis Correction In notice document 2011-23236 beginning on page...-23236 Filed 9-16-11; 8:45 am] BILLING CODE 1505-01-P ...

  2. Building Capacity in Health Systems and Policy Analysis in sub ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Building Capacity in Health Systems and Policy Analysis in sub-Saharan Africa. Since 2005, the Bill and Melinda Gates Foundation has been financing the master's program in health and population at the Institut supérieure des sciences de la population (ISSP), Université de Ouagadougou, Burkina Faso. However, after ...

  3. Thermal analysis of building roof assisted with water heater and ...

    Indian Academy of Sciences (India)

    D Prakash

    2018-03-14

    Mar 14, 2018 ... Thermal analysis; building roof; solar water heating system; roof ... These solar collec- ... several benefits, such as its wide range of storage temper- ... rugated plate, rear plate and back insulation material [12]. ..... [7] Weiss W and Rommel M 2008 Process heat collectors. State of the art within Task 33/IV.

  4. The Use of Modelling for Theory Building in Qualitative Analysis

    Science.gov (United States)

    Briggs, Ann R. J.

    2007-01-01

    The purpose of this article is to exemplify and enhance the place of modelling as a qualitative process in educational research. Modelling is widely used in quantitative research as a tool for analysis, theory building and prediction. Statistical data lend themselves to graphical representation of values, interrelationships and operational…

  5. Decoupling Economic Growth and Energy Use. An Empirical Cross-Country Analysis for 10 Manufacturing Sectors

    Energy Technology Data Exchange (ETDEWEB)

    Mulder, P. [International Institute for Applied Systems Analysis, Laxenburg (Austria); De Groot, H.L.F. [Faculty of Economics and Business Administration, Vrije Universiteit, Amsterdam (Netherlands)

    2004-07-01

    This paper provides an empirical analysis of decoupling economic growth and energy use and its various determinants by exploring trends in energy- and labour productivity across 10 manufacturing sectors and 14 OECD countries for the period 1970-1997. We explicitly aim to trace back aggregate developments in the manufacturing sector to developments at the level of individual subsectors. A cross-country decomposition analysis reveals that in some countries structural changes contributed considerably to aggregate manufacturing energy-productivity growth and, hence, to decoupling, while in other countries they partly offset energy-efficiency improvements. In contrast, structural changes only play a minor role in explaining aggregate manufacturing labour-productivity developments. Furthermore, we find labour-productivity growth to be higher on average than energy-productivity growth. Over time, this bias towards labour-productivity growth is increasing in the aggregate manufacturing sector, while it is decreasing in most manufacturing subsectors.

  6. Analysis of the economic structure of the eating-out sector: The case of Spain.

    Science.gov (United States)

    Cabiedes-Miragaya, Laura

    2017-12-01

    The objective of this article is to analyse the structure of the Spanish eating-out sector from an economic point of view, and more specifically, from the supply perspective. This aspect has been studied less than the demand side, almost certainly due to the gaps which exist in available official statistics in Spain, and which have been filled basically with consumer surveys. For this reason, focus is also placed on the economic relevance of the sector and attention is drawn to the serious shortcomings regarding official statistics in this domain, in contrast to the priority that hotel industry statistics have traditionally received in Spain. Based on official statistics, a descriptive analysis was carried out, focused mainly, though not exclusively, on diverse structural aspects of the sector. Special emphasis was placed on issues such as business demography (for instance, number and types of enterprises, survival rates, size distribution, and age structure), market concentration and structure of costs. Among other conclusions, the analysis allowed us to conclude that: part of the sector is more concentrated than it may at first appear to be; the dual structure of the sector described by the literature in relation to other countries is also present in the Spanish case; and the impact of ICTs (Information and Communication Technologies) on the sector are, and will foreseeably continue to be, particularly relevant. The main conclusion of this study refers to the fact that consumers have gained prominence in their contribution to shaping the structure of the sector. Copyright © 2017 Elsevier Ltd. All rights reserved.

  7. Seismic analysis of the mirror fusion test facility building

    International Nuclear Information System (INIS)

    Coats, D.W.

    1978-01-01

    This report describes a seismic analysis of the present Mirror Fusion Test Facility (MFTF) building at the Lawrence Livermore Laboratory. The analysis was conducted to evaluate how the structure would withstand the postulated design-basis earthquake (DBE). We discuss the methods of analysis used and results obtained. Also presented are a detailed description of the building, brief discussions of site geology, seismicity, and soil conditions, the approach used to postulate the DBE, and two methods for incorporating the effects of ductility. Floor spectra for the 2nd, 3rd, and 4th floors developed for preliminary equipment design are also included. The results of the analysis, based on best-estimate equipment loadings, indicate additional bracing and upgrading of connection details are required for the structure to survive the postulated design-basis earthquake. Specific recommendations are made

  8. The role of the public sector's research programme in support of the authorities and in building confidence on the safety of spent fuel disposal

    International Nuclear Information System (INIS)

    Vuori, S.; Rasilainen, K.

    2002-01-01

    A multiphase research programme was launched in 1989 to support the Finnish authorities in their activities concerning spent fuel management. The Finnish programme for spent fuel management has so far managed to keep its original time schedule at least partly due to clearly defined responsibilities between the nuclear energy producing industry and the authorities. It appears that the public sector's research programme has been successful in its supporting role by providing research results both on technical/ natural science and social science issues. In addition, the research programme has contributed directly and indirectly in building confidence on the post-closure and operational safety of a spent fuel disposal facility. (authors)

  9. Modeling and analysis of long term energy demands in residential sector of pakistan

    International Nuclear Information System (INIS)

    Rashid, T.; Sahir, M.H.

    2015-01-01

    Residential sector is the core among the energy demand sectors in Pakistan. Currently, various techniques are being used worldwide to assess future energy demands including integrated system modeling (ISM). Therefore, the current study is focused on implementation of ISM approach for future energy demand analysis of Pakistan's residential sector in terms of increase in population, rapid urbanization, household size and type, and increase/decrease in GDP. A detailed business-as-usual (BAU) model is formulated in TIMES energy modeling framework using different factors like growth in future energy services, end-use technology characterization, and restricted fuel supplies. Additionally, the developed model is capable to compare the projected energy demand under different scenarios e.g. strong economy, weak economy and energy efficiency. The implementation of ISM proved a viable approach to predict the future energy demands of Pakistan's residential sector. Furthermore, the analysis shows that the energy consumption in the residential sector would be 46.5 Mtoe (Million Ton of Oil Equivalent) in 2040 compared to 23 Mtoe of the base year (2007) along with 600% increase in electricity demands. The study further maps the potential residential energy policies to congregate the future demands. (author)

  10. Earthquake response analysis of a base isolated building

    International Nuclear Information System (INIS)

    Mazda, T.; Shiojiri, H.; Sawada, Y.; Harada, O.; Kawai, N.; Ontsuka, S.

    1989-01-01

    Recently, the seismic isolation has become one of the popular methods in the design of important structures or equipments against the earthquakes. However, it is desired to accumulate the demonstration data on reliability of seismically isolated structures and to establish the analysis methods of those structures. Based on the above recognition, the vibration tests of a base isolated building were carried out in Tsukuba Science City. After that, many earthquake records have been obtained at the building. In order to examine the validity of numerical models, earthquake response analyses have been executed by using both lumped mass model, and finite element model

  11. Fort Carson Building 1860 Biomass Heating Analysis Report

    Energy Technology Data Exchange (ETDEWEB)

    Hunsberger, Randolph [National Renewable Energy Lab. (NREL), Golden, CO (United States); Tomberlin, Gregg [National Renewable Energy Lab. (NREL), Golden, CO (United States); Gaul, Chris [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-09-01

    As part of the Army Net-Zero Energy Installation program, the Fort Carson Army Base requested that NREL evaluate the feasibility of adding a biomass boiler to the district heating system served by Building 1860. We have also developed an Excel-spreadsheet-based decision support tool--specific to the historic loads served by Building 1860--with which users can perform what-if analysis on gas costs, biomass costs, and other parameters. For economic reasons, we do not recommend adding a biomass system at this time.

  12. Building Information Modeling (BIM) for Indoor Environmental Performance Analysis

    DEFF Research Database (Denmark)

    The report is a part of a research assignment carried out by students in the 5ETCS course “Project Byggeri – [entitled as: Building Information Modeling (BIM) – Modeling & Analysis]”, during the 3rd semester of master degree in Civil and Architectural Engineering, Department of Engineering, Aarhus...... University. This includes seven papers describing BIM for Sustainability, concentrating specifically on individual topics regarding to Indoor Environment Performance Analysis....

  13. FUNCTIONAL ANALYSIS OF THE HEALTH SECTOR IN ROMANIA

    Directory of Open Access Journals (Sweden)

    Bogdan Tatiana

    2015-07-01

    Full Text Available This paper comprises an assessment of the Romanian health financing policy and a detailed analysis of income and expenditure trends over the past seven years. The current situation of the health system is evaluated by reviewing the existing health legislation and documents on public health policies from Romania and from abroad, by analyzing the official statistics (the Romanian Yearbook of Health Statistics, Who database and by performing a healthcare system financial analysis. Although the financial efforts of the Romanian state to support the health system have increased, almost all the incomes and expenditures of the health care system having recorded significant increases, the population perception on health services worsened. Financing the health system continues to be inadequate and used in an ineffective way. Health is an essential component of well-being with major socio-economic implications. The organization and functioning of the health system depends on ensuring adequate funding. Romania must develop its health strategy in the context of European Union policies. These policies are based on values and principles such as promoting universal protection against financial risk, promoting a more equitable distribution of the financing burden, promoting equitable provision and use of services relative to need, improving the transparency and accountability of the system to the public, promoting quality and efficiency in service delivery, improving administrative efficiency, while ensuring the financial sustainability of the health system. In this context, in order to support a financially sustainable and high performing health system, the paper includes recommendations for increasing the public incomes in the health insurance system and options to streamline the healthcare services and expenses in the future.

  14. Malaysia and the Knowledge Economy: Building a World-Class Higher Education System. Human Development Sector Reports

    Science.gov (United States)

    Regel, Omporn; Salmi, Jamil; Watkins, Alfred; Tan, Hong; Dawkins, John; Saroyan, Alenoush; Vestergaard, Jakob

    2007-01-01

    This report was prepared at the request of the Government of Malaysia (GOM) as a contribution to the long term development objectives for the university sector under the Ninth Malaysia Plan. The GOM is considering new policy directions to make the country a more competitive player in the world economy. Such a strategy will require bold innovations…

  15. System dynamics analysis of strategies to reduce energy use in aluminum-intensive sectors

    Energy Technology Data Exchange (ETDEWEB)

    Hanes, Rebecca J.; Nicholson, Scott; 25-29 June 2017, Carpenter, Alberta

    2017-07-13

    Aluminum is one of the most widely used materials in industry, with applications in buildings, vehicles, aircraft, and consumer products. Its ubiquity is also on the rise: aluminum is beginning to supplant steel in lightweight vehicles and aircraft, and is used in many green or LEED-certified buildings. Although aluminum tends to be highly recycled, particularly by manufacturers of aluminum products, the sector as a whole is still far from a closed system. As a result, the increase in aluminum consumption also means an increase in primary aluminum production-an energy-intensive process-and an increase in consumption of the raw material bauxite, which in the U.S. is almost entirely imported. Our objectives for this study are to identify and analyze aluminum sector technologies and practices that reduce the energy required to manufacture aluminum products and reduce U.S. dependence on imported aluminum and bauxite. To accomplish these objectives, we will develop a system dynamics (SD) model of aluminum production, use and recycling in key application areas, including aerospace, ground vehicles and consumer products. The model will cover the entire aluminum supply chain as it exists in the U.S., from bauxite importing and refining, to the manufacture of products, to the product use phase and end-of-life processing steps. Aluminum flows throughout the model will be determined by the annual domestic demand for each application area as well as demand projections that extend to 2030. Energy consumption will be tracked based on the flows of aluminum through each step of the supply chain. Using the SD model, we will evaluate several technologies and practices that have the potential to reduce energy consumption and reliance on imported bauxite. These include implementation of advanced primary aluminum production technologies, increased recycling within and between application areas, increased material efficiency and increased product lifetimes. Each of these strategies

  16. Elastic-plastic dynamic analysis of a reactor building

    International Nuclear Information System (INIS)

    Umemura, Hajime; Tanaka, Hiroshi.

    1976-01-01

    The basic characteristics of the dynamic response of a reactor building to severe earthquake ground motion are very important for the evaluation of the safety of nuclear plant systems. A computer program for elastic-plastic dynamic analysis of reactor buildings using lumped mass models is developed. The box and cylindrical walls of boiling water reactor buildings are treated as vertical beams. The nonlinear moment-rotation and shear force-shear deformation relationships of walls are based in part upon the experiments of prototype structures. The geometrical non-linearity of the soil rocking spring due to foundation separation is also considered. The nonlinear equation of motion is expressed in incremental form using tangent stiffness matrices, following the algorithm developed by E.L. Wilson et al. The damping matrix in the equation is formulated as the combination of the energy evaluation method and Penzien-Wilson's approach to accomodate the different characteristics of soil and building damping. The analysis examples and the comparison of elastic and elastic-plastic analysis results are presented. (auth.)

  17. Multivariant design and multiple criteria analysis of building refurbishments

    Energy Technology Data Exchange (ETDEWEB)

    Kaklauskas, A.; Zavadskas, E. K.; Raslanas, S. [Faculty of Civil Engineering, Vilnius Gediminas Technical University, Vilnius (Lithuania)

    2005-07-01

    In order to design and realize an efficient building refurbishment, it is necessary to carry out an exhaustive investigation of all solutions that form it. The efficiency level of the considered building's refurbishment depends on a great many of factors, including: cost of refurbishment, annual fuel economy after refurbishment, tentative pay-back time, harmfulness to health of the materials used, aesthetics, maintenance properties, functionality, comfort, sound insulation and longevity, etc. Solutions of an alternative character allow for a more rational and realistic assessment of economic, ecological, legislative, climatic, social and political conditions, traditions and for better the satisfaction of customer requirements. They also enable one to cut down on refurbishment costs. In carrying out the multivariant design and multiple criteria analysis of a building refurbishment much data was processed and evaluated. Feasible alternatives could be as many as 100,000. How to perform a multivariant design and multiple criteria analysis of alternate alternatives based on the enormous amount of information became the problem. Method of multivariant design and multiple criteria of a building refurbishment's analysis were developed by the authors to solve the above problems. In order to demonstrate the developed method, a practical example is presented in this paper. (author)

  18. Life cycle primary energy analysis of residential buildings

    Energy Technology Data Exchange (ETDEWEB)

    Gustavsson, Leif; Joelsson, Anna [Ecotechnology, Department of Engineering and Sustainable Development, Mid Sweden University, SE-831 25 Oestersund (Sweden)

    2010-02-15

    The space heating demand of residential buildings can be decreased by improved insulation, reduced air leakage and by heat recovery from ventilation air. However, these measures result in an increased use of materials. As the energy for building operation decreases, the relative importance of the energy used in the production phase increases and influences optimization aimed at minimizing the life cycle energy use. The life cycle primary energy use of buildings also depends on the energy supply systems. In this work we analyse primary energy use and CO{sub 2} emission for the production and operation of conventional and low-energy residential buildings. Different types of energy supply systems are included in the analysis. We show that for a conventional and a low-energy building the primary energy use for production can be up to 45% and 60%, respectively, of the total, depending on the energy supply system, and with larger variations for conventional buildings. The primary energy used and the CO{sub 2} emission resulting from production are lower for wood-framed constructions than for concrete-framed constructions. The primary energy use and the CO{sub 2} emission depend strongly on the energy supply, for both conventional and low-energy buildings. For example, a single-family house from the 1970s heated with biomass-based district heating with cogeneration has 70% lower operational primary energy use than if heated with fuel-based electricity. The specific primary energy use with district heating was 40% lower than that of an electrically heated passive row house. (author)

  19. Dynamic analysis of a reactor building on alluvial soil

    International Nuclear Information System (INIS)

    Arya, A.S.; Chandrasekaran, A.R.; Paul, D.K.; Warudkar, A.S.

    1977-01-01

    The reactor building consists of reinforced concrete internal framed structure enclosed in double containment shells of prestressed and reinforced concrete all resting on a common massive raft. The external cylindrical shell is capped by a spherical dome while the internal shell carries a cellular gird slab. The building is partially buried under ground. The soil consists of alluvial going to 1000 m depth. The site lies in a moderate seismic zone. The paper presents the dynamic analysis of the building including soil-structure interaction. The mathematical model consists of four parallel, suitably interconnected struxtures, namely inner containment, outer containment, internal frame and the calandria vault. Each one of the parallel structures consists of lumped-mass beam elements. The soil below the raft and on the sides of outer containment shell is represented by elastic springs in both horizontal and vertical directions. The various assumpions required to be made in developing the mathematical model are briefly discussed in the paper. (Auth.)

  20. The Building sector commitment to promote the sustainability of construction products: a common European approach for the Environmental Product Performances

    Directory of Open Access Journals (Sweden)

    Caterina Gargari

    2013-05-01

    Full Text Available The industry of construction products plays an important role in Europe in promoting the sustainability of the built environment in a life cycle perspective. Within the framework of the European initiatives for a sustainable competitiveness, manufacturers are interested in promoting a life cycle approach along the building chain. However both, institutions and building operators, in general still have to go a long way on designing and applying a sustainable and competitive industrial policy. This paper aims to describe the European background, the regulatory framework, identifying gaps and the actions to be undertaken to promote a market for sustainable products and sustainable buildings. In particular this paper deals with the assessment and communication of the environmental performance of construction products between the operators in the building chain, as a prerequisite for the sustainability of the built environment, and outlines the strategies to implement a proper evaluation and communication process.

  1. Statistical Compilation of the ICT Sector and Policy Analysis | Page 2 ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    ... to widen and deepen, so too does its impact on economic development. ... The outcomes of such efforts will subsequently inform policy discourse and ... Studies. Statistical Compilation of the ICT Sector and Policy Analysis project : country experiences; Malaysia ... Asian outlook: New growth dependent on new productivity.

  2. Statistical Compilation of the ICT Sector and Policy Analysis | Page 4 ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Statistical Compilation of the ICT Sector and Policy Analysis. As the presence and influence of information and communication technologies (ICTs) continues to widen and deepen, so too does its impact on economic development. However, much work needs to be done before the linkages between economic development ...

  3. Statistical Compilation of the ICT Sector and Policy Analysis | Page 3 ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Statistical Compilation of the ICT Sector and Policy Analysis. As the presence and influence of information and communication technologies (ICTs) continues to widen and deepen, so too does its impact on economic development. However, much work needs to be done before the linkages between economic development ...

  4. Materials, used in historical buildings, analysis methods and solutions puroposals

    Science.gov (United States)

    Döndüren, M. Sami; Sişik, Ozlem

    2017-10-01

    Most of historical buildings are built with pressure principle and have the characteristics of masonry structures. Therefore, the structure components of buildings are constituted bearing walls, columns, buttresses, vaults and domes. Natural stone, cut stone, rubble stone brick or alternate materials were used in the bearing elements. Brick-dust and mortar with more binding feature were used as combination elements. In time, some problems were occurred in used materials and in structure as a result of various effects. Therefore, it is necessary to apply various applications in framework of repair and strengthening of buildings. In this study, restoration of historic buildings and the control of the adequacy of the bearing systems as one most important part of structure were examined. For this purpose, static analysis of Edirne-Merkez Demirtaş (Timurtaş) mosque located in Edirne was tested. Testes could give suggestions and be applied if buildings needed be revealed. The structure was modelled with finite element model of sap2000 package program and the forces generated under various loads and stresses, the occurred deformation due to that, overflow of allowable stress of this deformation and stresses were investigated. As the results of this study can be note that the maximum compressive stress at the construction is calculated as 1.1 MPa.

  5. Materials, used in historical buildings, analysis methods and solutions puroposals

    Directory of Open Access Journals (Sweden)

    Döndüren M.Sami

    2017-01-01

    Full Text Available Most of historical buildings are built with pressure principle and have the characteristics of masonry structures. Therefore, the structure components of buildings are constituted bearing walls, columns, buttresses, vaults and domes. Natural stone, cut stone, rubble stone brick or alternate materials were used in the bearing elements. Brick-dust and mortar with more binding feature were used as combination elements. In time, some problems were occurred in used materials and in structure as a result of various effects. Therefore, it is necessary to apply various applications in framework of repair and strengthening of buildings. In this study, restoration of historic buildings and the control of the adequacy of the bearing systems as one most important part of structure were examined. For this purpose, static analysis of Edirne-Merkez Demirtaş (Timurtaş mosque located in Edirne was tested. Testes could give suggestions and be applied if buildings needed be revealed. The structure was modelled with finite element model of sap2000 package program and the forces generated under various loads and stresses, the occurred deformation due to that, overflow of allowable stress of this deformation and stresses were investigated. As the results of this study can be note that the maximum compressive stress at the construction is calculated as 1.1 MPa.

  6. Evaluating the scope for energy-efficiency improvements in the public sector: Benchmarking NHSScotland's smaller health buildings

    International Nuclear Information System (INIS)

    Murray, Joe; Pahl, O.; Burek, S.

    2008-01-01

    The National Health Service in Scotland (NHSScotland) has, in recent years, done much to reduce energy consumption in its major healthcare buildings (hospitals). On average, a reduction of 2% per year has been achieved since 2000, based on hospital buildings. However, there had been little or no attention paid to smaller premises such as health centres, clinics, dentists, etc. Such smaller healthcare buildings in Scotland constitute 29% of the total treated floor area of all NHSScotland buildings and, therefore, may contribute a similar percentage of carbon and other emissions to the environment. By concentrating on a sample of local health centres in Scotland, this paper outlines the creation of an energy benchmark target, which is part of a wider research project to investigate the environmental impacts of small healthcare buildings in Scotland and the scope for improvements. It was found that energy consumption varied widely between different centres but this variation could not be linked to building style, floor area or volume. Overall, it was found that a benchmark of 0.2 GJ/m 3 would be challenging, but realistic

  7. An analysis on the short-term sectoral competitiveness impact of carbon tax in China

    International Nuclear Information System (INIS)

    Wang Xin; Li Ji Feng; Zhang Yaxiong

    2011-01-01

    Market-based instruments, particularly carbon tax, have recently drawn the attention of Chinese government by their cost-effective contribution to the achievement of China's climate targets. Most of the recent policy proposals have focused on its long-term impact. However, particularly for policy makers, both long term and short term effects of carbon tax would be necessary when determining tax rates. We provided a detailed analysis of short-term impacts of carbon tax on sectoral competitiveness in this paper. We divided China's economy into 36 sectors, based on its 2007 input-output table, in order to examine the ratio of carbon tax added costs to sector GDP. We were thus able to determine the impact level of a carbon tax on each sector. We then divided the sectoral trade impact into domestic competitiveness with regards to foreign imported products and international competitiveness external to the Chinese domestic market. We found that a high tax level (100 yuan/t CO 2 ) may necessitate compensatory measures to certain highly affected industries, and that a low tax rate (10 yuan/t CO 2 ) would generate few competitiveness problems for all industries and may therefore be considered as an appropriate starting point. - Highlights: → We study short-term sectoral competitiveness impact of carbon tax in China. → For each sector, we study its carbon cost, GDP share and trade intensity. → A high rate (100 yuan/t CO 2 ) may require compensatory measures to certain industries. → A low rate (10 yuan/t CO 2 ) would generate few competitiveness problems.

  8. Fire Risk Analysis and Optimization of Fire Prevention Management for Green Building Design and High Rise Buildings: Hong Kong Experience

    Directory of Open Access Journals (Sweden)

    Yau Albert

    2014-12-01

    Full Text Available There are many iconic high rise buildings in Hong Kong, for example, International Commercial Centre, International Financial Centre, etc. Fire safety issue in high rise buildings has been raised by local fire professionals in terms of occupant evacuation, means of fire-fighting by fire fighters, sprinkler systems to automatically put off fires in buildings, etc. Fire risk becomes an important issue in building fire safety because it relates to life safety of building occupants where they live and work in high rise buildings in Hong Kong. The aim of this research is to identify the fire risk for different types of high rise buildings in Hong Kong and to optimise the fire prevention management for those high rise buildings with higher level of fire risk and to validate the model and also to carry out the study of the conflict between the current fire safety building code and the current trend of green building design. Survey via the 7-point scale questionnaire was conducted through 50 participants and their responses were received and analysed via the statistical tool SPSS software computer program. A number of statistical methods of testing for significantly difference in samples were adopted to carry out the analysis of the data received. When the statistical analysis was completed, the results of the data analysis were validated by two Fire Safety Experts in this area of specialisation and also by quantitative fire risk analysis.

  9. Sectoral analysis of energy consumption and energy related CO2 emissions in Finland 1990-1999

    International Nuclear Information System (INIS)

    Kirjavainen, M.; Tamminen, E.

    2002-03-01

    This study describes the development of energy consumption and energy related CO 2 emissions in Finland between 1990-1999. For better understanding of the factors behind the development in main sectors, special indicators are calculated to evaluate how the overall development of the sector is affected by the general activity of the sector, changes in sectoral structure and changes in end-use intensities within the sector. The specific energy consumption of space heating reduced especially during the first half of the decade. Also the total CO 2 emissions caused by space heating reduced, in spite of the increase in the building stock. The main reason for this has been the reduction in specific CO 2 emissions in production of district heat. Regardless of the increased traffic and slightly increased use of passenger cars over public transport, the total energy consumption as well as total CO 2 emissions in passenger transport reduced during the decade. The main reason for this is that the specific fuel consumption of passenger cars has reduced significantly. Volumes in freight traffic increased rapidly after the recession, and as no significant changes have occurred in either specific consumptions or in shares of different transport modes, the total energy use as well as total CO 2 emissions of freight transport have increased. The major factors affecting the energy use and CO 2 emissions of the manufacturing sector have been changes in production volumes. After the recession, growth has been rapid and that has resulted in increased total energy use and CO 2 emissions. Anyway, the especially rapid growth of the less energy intensive electronics industry has resulted in downward overall energy intensity within manufacturing sector. Major factors affecting the specific CO 2 emissions in energy production have been changes in the primary energy supply mix. In electricity production, the major factors have been the increase in nuclear capacity and the variation in net

  10. Energy efficiency of China's industry sector: An adjusted network DEA (data envelopment analysis)-based decomposition analysis

    International Nuclear Information System (INIS)

    Liu, Yingnan; Wang, Ke

    2015-01-01

    The process of energy conservation and emission reduction in China requires the specific and accurate evaluation of the energy efficiency of the industry sector because this sector accounts for 70 percent of China's total energy consumption. Previous studies have used a “black box” DEA (data envelopment analysis) model to obtain the energy efficiency without considering the inner structure of the industry sector. However, differences in the properties of energy utilization (final consumption or intermediate conversion) in different industry departments may lead to bias in energy efficiency measures under such “black box” evaluation structures. Using the network DEA model and efficiency decomposition technique, this study proposes an adjusted energy efficiency evaluation model that can characterize the inner structure and associated energy utilization properties of the industry sector so as to avoid evaluation bias. By separating the energy-producing department and energy-consuming department, this adjusted evaluation model was then applied to evaluate the energy efficiency of China's provincial industry sector. - Highlights: • An adjusted network DEA (data envelopment analysis) model for energy efficiency evaluation is proposed. • The inner structure of industry sector is taken into account for energy efficiency evaluation. • Energy final consumption and energy intermediate conversion processes are separately modeled. • China's provincial industry energy efficiency is measured through the adjusted model.

  11. Electricity demand by the commercial sector in Kuwait: an econometric analysis

    International Nuclear Information System (INIS)

    Eltony, M.N.; Hajeeh, M.

    1999-01-01

    This paper models and estimates electricity demand by the Kuwaiti commercial sector, using an error correction model. It also simulates the estimated model under three scenarios and presents an analysis of the results. The empirical results indicate that short- and long-run electricity consumption and the level of economic activity are interrelated. The forecasts show that electricity consumption varies directly with economic growth. They also suggest that an increase of 100 per cent in nominal electricity prices will lead to a reduction in commercial sector electricity demand of 45 per cent by the year 2010. The simulation of the model under the different scenarios demonstrates that the potential for energy conservation exists in the commercial sector

  12. A conceptual analysis of the role of competitive intelligence in Zimbabwe’s banking sector

    Directory of Open Access Journals (Sweden)

    Alexander Maune

    2014-11-01

    Full Text Available This article aims to provide a conceptual framework and analysis of the role of competitive intelligence in Zimbabwe`s banking sector. The article used literature and conceptual research approach. Literature review has shown the concept of competitive intelligence to be multidimensional, with a multitude of varying definitions, as well as multifaceted and fuzzy. The concept of competitive intelligence has been presented variously as a process, a function, a product or a mix of all three. Literature review has also shown numerous intelligence concepts that are linked to the concept of competitive intelligence. This article will increase the academic understanding and state of the concept of competitive intelligence in Zimbabwe`s banking sector as well as assisting the entire banking sector.

  13. The Relative Importance of the Service Sector in the Mexican Economy: A Time Series Analysis

    Directory of Open Access Journals (Sweden)

    Carlos Alberto Flores

    2014-01-01

    Full Text Available We conduct a study of the secondary and tertiary sectors with the goal of highlighting the relative im-portance of services in the Mexican economy. We consider a time series analysis approach designed to identify the stochastic nature of the series, as well as to define their long-run and-short run relationships with Gross Domestic Product (GDP. The results of cointegration tests suggest that, for the most part, activities in the secondary and tertiary sectors share a common trend with GDP. Interestingly, the long-run elasticities of GDP with respect to services are on average larger than those with respect to secondary activities. Common cycle tests results identify the existence of common cycles between GDP and the disaggregated sectors, as well as with manufacturing, commerce, real estate and transportation. In this case, the short-run elasticities of secondary activities are on average larger than those corresponding to services.

  14. AN ANALYSIS OF THE ROMANIAN FISHERY SECTOR IN THE EUROPEAN COMMUNITY CONTEXT

    Directory of Open Access Journals (Sweden)

    Silvius STANCIU

    2015-12-01

    Full Text Available The development of the fishery sector represents one of the European Union’s priorities due to the positive impact it has on food security and to its potential to ensure nutritious and quality food at an affordable price as compared to other animal-origin resources. The Community policy in the fishery sector focuses on reducing the Community market dependence on imports and on the sustainable development of business in this domain. Romania aligned with the Community policies and, therefore, important funds were allocated to the national fishery sector. The diversified natural resources, the possibility to use friendly technologies, the qualified staff, the tradition in the domain, and the existence of a number of niche markets all represent motivations for the development of the Romanian fishery sector. The present paper proposes an analysis of the Romanian fishery production and of the European financing effects on the specialized companies. Despite the fact that there have been important resources allocated to the sector and there is a slight positive evolution, the absorption of funds was difficult. The results of the investment may be observed after a long period of time, this is why Romania is still dependent on fishery product imports. Aquaculture represents the main segment towards which the European funds were directed, including in our country, thus providing the greatest part of the income and employment in the domain.

  15. Concepts for the removal of legal barriers to climate protection in Germany's buildings sector; Konzepte fuer die Beseitigung rechtlicher Hemmnisse des Klimaschutzes im Gebaeudebereich

    Energy Technology Data Exchange (ETDEWEB)

    Buerger, Veit; Hermann, Andreas; Keimeyer, Friedhelm; Brunn, Christoph; Haus, David; Menge, Joanna [Oeko-Institut e.V. - Institut fuer Angewandte Oekologie, Berlin (Germany); Klinski, Stefan [Hochschule fuer Wirtschaft und Recht Berlin (Germany)

    2013-07-15

    This study examines ways to remove legal barriers to climate protection in the buildings sector with a special focus on the energy refurbishment of existing buildings. Part A is concerned with legal concepts for financing measures geared to the energy rehabilita-tion of buildings. In a first step possible regulatory instruments - both those being discussed by experts in specialist contexts and further feasible options - are identified, with which effective incentives for the implementation of ambitious energy refurbishments can be generated. The incentives should function as independently as possible from the incalculabilities of public budgets. The different options are then systematically analysed for their compatibility with the overarching requirements of Germany's national law and EU law as well as for their feasibility. Following an expert assessment of the functionality of those options categorised as legally positive, the report develops a well-coordinated set of different instruments which are partly based on public charges and partly on the commitments of private actors and allow for the introduction of a legal entitlement of building owners to support. Part B discusses the removal of (non-economic) legal barriers to the energy refurbishment of buildings. First of all an overview is provided of such barriers in different areas of the law (like tenancy law, residential property law, building law, among others). Then the focus is placed on specific legal barriers in the law on architectural and engineering fees as well as in public pro-curement law for construction contracts. Continuing along the same lines, concrete suggestions are developed for legal improvements.

  16. COMPARATIVE ANALYSIS OF INNOVATION ASPECT EVIDENCE IN CONSTRUCTION AND MULTI-SECTOR COMPANIES

    Directory of Open Access Journals (Sweden)

    Ricardo Floriani

    2010-12-01

    Full Text Available The goal of this study is to make a comparative analysis of innovation aspect evidence among construction and multi-sector companies. Descriptive research was done through a content analysis of administration reports from 2005 to 2007. From the researched material, 14 aspects of innovations were extracted, which offer the basis to the content analysis. Two non-probability samples were developed, the first consisting of 22 multi-sector businesses, within 18 economic sectors, which comprises the companies in the comparison. Aspects of innovation found in this group of companies were compared to those stated in the reports of the administration of the 34 construction companies with open capital, which comprise the second sample. The survey results show that the evidence of innovation aspects are different in construction companies when compared to the administration reports of multi-sector business of 2005, 2006 and 2007. The construction companies state fewer innovation aspects in the administration reports than multisector companies in the analyzed period. The conclusion is that while construction companies can be considered fairly innovative, multi-sectorial companies present more innovations on average.

  17. Development of Electronic Identification Measures in the Public Sector of Lithuania: Analysis of Alteration Possibilities

    Directory of Open Access Journals (Sweden)

    Rimantas Petrauskas

    2014-03-01

    Full Text Available Purpose – to analyze, assess and identify alteration possibilities of effective implementation of e-Identification technology solutions focusing on organization capabilities in the public sector of Lithuania.Design/methodology/approach – different methods were used in the research. Content analysis method was used for the issues related to application of e-Identification solutions, technology management and organizational capabilities. During the pilot research, information on specificities of organization capabilities to implement e-Identification solution in the public sector was gathered, analyzed and interlinked with content analysis via comparative and deductive methods.Findings – the research shows that the gap in the area of development of e-Identification solutions in the public sector in Lithuania is affected by the lack of organizational capabilities that need to be developed internally. The challenge is to foster organizational capabilities in the environment, influenced by rapidly emerging new technology solutions (use of smartphones and applications and limited legal regulation. Lifecycle of any technology solutions becomes shorter and jeopardizes its use and functionality in time; therefore, public sector institutions could benefit from holistic e-Identification solution diffusion strategy that incorporates aspects of organizational capabilities.Research limitations/implications – the research findings are limited by the nature of the pilot research (peer review, level of experience in their organizations and environment as well as the geographic scope of the research.Practical implications – the article portrays public sector environment of implementation of e-Identification solutions and particularities of organizational capabilities to manage its development.Originality/value – originality of the article is in the research and assessment of country specific future proof needs to alter and improve the existing

  18. The South African wildlife ranching sector: A Social Accounting Matrix Leontief multiplier analysis

    Directory of Open Access Journals (Sweden)

    Philippus C. Cloete

    2014-10-01

    Research purpose: The purpose of this article is to put into context the relative economic contribution of the wildlife ranching sector, as opposed to other land-use options in South Africa. Motivation for the study: Growth in the wildlife ranching sector at the cost of other traditional farming practices resulted in disagreements amongst various role players about the impact thereof on the national economy. The controversy can most probably be explained by different beliefs, coupled with the lack of a proper understanding and quantification of the wildlife ranching sector’s contribution toward the economy. Research methodology: The study employed a Social Accounting Matrix-based Leontief multiplier analysis for South Africa. Main findings: Results from the multiplier analysis revealed that developments within the wildlife ranching sector are likely to make a relatively more superior contribution towards the economy, especially when compared to similar land-use options such as extensive livestock production. Practical/managerial implications: It has been acknowledged by both academia and private sector that a major need exists for more research on the South African wildlife ranching industry, specifically looking at issues such as the industries, economic and social contributions, potentials and constraints. The research, therefore, contributes toward the depth of economic information and research regarding the South African wildlife sector. Contribution/value added: The research provides valuable information in dealing with the ‘popular belief’, especially amongst some of South Africa’s decision makers, namely, that growth in the wildlife ranching sector is not or does not have the ability to contribute significantly toward economic and socioeconomic factors.

  19. Project management in the public sector: a bibliometric analysis (1988-2014

    Directory of Open Access Journals (Sweden)

    Diego Honorato Clemente

    2017-06-01

    Full Text Available The importance of management of projects in the public sector has manifested itself as a governmental initiative which ensures and contributes to governance and focusses on transparency, accountability, the efficient and effective use of public resources, the implementation of policies and changes and, principally, on the maintenance of public trust. This being the case, the aim of this study is to present a bibliometric study about the management of projects in the public sector in order to identify publication trends and theoretical currents within this field. Data was gathered from the Web of Science Core Collection database and the software Sitkis and Ucinet were utilized to generate the networks. Descriptive and network analyses such as reference articles, co-citations and key words are presented. Findings suggest that management and execution methods of construction and infrastructure projects, such as Build-Operate-Transfer (BOT and Public-Private Partnerships, are relevant within the field of project management in the public sector.

  20. Seismic simulation analysis of nuclear reactor building by soil-building interaction model

    International Nuclear Information System (INIS)

    Muto, K.; Kobayashi, T.; Motohashi, S.; Kusano, N.; Mizuno, N.; Sugiyama, N.

    1981-01-01

    Seismic simulation analysis were performed for evaluating soil-structure interaction effects by an analytical approach using a 'Lattice Model' developed by the authors. The purpose of this paper is to check the adequacy of this procedure for analyzing soil-structure interaction by means of comparing computed results with recorded ones. The 'Lattice Model' approach employs a lumped mass interactive model, in which not only the structure but also the underlying and/or surrounding soil are modeled as descretized elements. The analytical model used for this study extends about 310 m in the horizontal direction and about 103 m in depth. The reactor building is modeled as three shearing-bending sticks (outer wall, inner wall and shield wall) and the underlying and surrounding soil are divided into four shearing sticks (column directly beneath the reactor building, adjacent, near and distant columns). A corresponding input base motion for the 'Lattice Model' was determined by a deconvolution analysis using a recorded motion at elevation -18.5 m in the free-field. The results of this simulation analysis were shown to be in reasonably good agreement with the recorded ones in the forms of the distribution of ground motions and structural responses, acceleration time histories and related response spectra. These results showed that the 'Lattice Model' approach was an appropriate one to estimate the soil-structure interaction effects. (orig./HP)

  1. Natural vibration experimental analysis of Novovoronezhskaya NPP main building

    International Nuclear Information System (INIS)

    Zoubkov, D.; Isaikin, A.; Shablinsky, G.; Lopanchuk, A.; Nefedov, S.

    2005-01-01

    1. Natural vibration frequencies are main characteristics of buildings and structures which allow to give integral estimation of their in-service state. Even relatively small changes of these frequencies as compared to the initially registered values point to serious defects of building structures. In this paper we analyzed natural vibration frequencies and natural modes of the main building (MB) of Novovoronezhskaya NPP operating nuclear unit with WWER-440 type reactor. The MB consists of a reactor compartment (RC), a machine room (MR) and an electric device (ED) unit positioned in between. 2. Natural vibration frequencies and natural modes of the MB were determined experimentally by analyzing its microvibrations caused by operation of basic equipment (turbines, pumps, etc.). Microvibrations of the main building were measured at 12 points. At each point measurements were carried out along two or three mutually perpendicular vibration directions. Spectral analysis of vibration records has been conducted. Identification of natural vibration frequencies was carried out on the basis of the spectral peaks and plotted vibration modes (taking into account operating frequencies of the basic equipment of the power generating unit). On the basis of the measurement results three transverse modes and corresponding natural vibration frequencies of the MB, one longitudinal mode and corresponding natural vibration frequency of the MB and two natural frequencies of vertical vibrations of RC and MR floor trusses (1st and 2nd symmetric forms) were determined. Dynamic characteristics of the main building of NV NPP resulting from full scale researches are supposed to be used as one of building structure stability criteria. (authors)

  2. Futures Business Models for an IoT Enabled Healthcare Sector: A Causal Layered Analysis Perspective

    OpenAIRE

    Julius Francis Gomes; Sara Moqaddemerad

    2016-01-01

    Purpose: To facilitate futures business research by proposing a novel way to combine business models as a conceptual tool with futures research techniques. Design: A futures perspective is adopted to foresight business models of the Internet of Things (IoT) enabled healthcare sector by using business models as a futures business research tool. In doing so, business models is coupled with one of the most prominent foresight methodologies, Causal Layered Analysis (CLA). Qualitative analysis...

  3. Sensitivity analysis of the energy demand of existing buildings based on the Danish Building and Dwelling Register (BBR)

    DEFF Research Database (Denmark)

    Nielsen, Anker; Wittchen, Kim Bjarne; Bertelsen, Niels Haldor

    2014-01-01

    performance certificate. The Danish Building Research Institute has described a method that can be applied for estimating the energy demand of dwellings. This is based on the information in the Danish Building and Dwelling Register and requirements in the Danish Building Regulations from the year......The EU Directive on the Energy Performance of Buildings requires that energy certification of buildings should be implemented in Denmark so that houses that are sold or let should have an energy performance certificate. The result is that only a small part of existing houses has an energy...... of construction of the house. The result is an estimate of the energy demand of each building with a variation. This makes it possible to make an automatic classification of all buildings. The paper discusses the uncertainties and makes a sensitivity analysis to find the important parameters. The variations...

  4. Sensitivity analysis of the energy demand of existing buildings based on the Danish Building and Dwelling Register

    DEFF Research Database (Denmark)

    Nielsen, Anker; Wittchen, Kim Bjarne; Bertelsen, Niels Haldor

    2014-01-01

    performance certificate. The Danish Building Research Institute has described a method that can be applied for estimating the energy demand of dwellings. This is based on the information in the Danish Building and Dwelling Register and requirements in the Danish Building Regulations from the year......The EU Directive on the Energy Performance of Buildings requires that energy certification of buildings should be implemented in Denmark so that houses that are sold or let should have an energy performance certificate. The result is that only a small part of existing houses has an energy...... of construction of the house. The result is an estimate of the energy demand of each building with a variation. This makes it possible to make an automatic classification of all buildings. The paper discusses the uncertainties and makes a sensitivity analysis to find the important parameters. The variations...

  5. Reducing Transaction Costs for Energy Efficiency Investments and Analysis of Economic Risk Associated With Building Performance Uncertainties: Small Buildings and Small Portfolios Program

    Energy Technology Data Exchange (ETDEWEB)

    Langner, R.; Hendron, B.; Bonnema, E.

    2014-08-01

    The small buildings and small portfolios (SBSP) sector face a number of barriers that inhibit SBSP owners from adopting energy efficiency solutions. This pilot project focused on overcoming two of the largest barriers to financing energy efficiency in small buildings: disproportionately high transaction costs and unknown or unacceptable risk. Solutions to these barriers can often be at odds, because inexpensive turnkey solutions are often not sufficiently tailored to the unique circumstances of each building, reducing confidence that the expected energy savings will be achieved. To address these barriers, NREL worked with two innovative, forward-thinking lead partners, Michigan Saves and Energi, to develop technical solutions that provide a quick and easy process to encourage energy efficiency investments while managing risk. The pilot project was broken into two stages: the first stage focused on reducing transaction costs, and the second stage focused on reducing performance risk. In the first stage, NREL worked with the non-profit organization, Michigan Saves, to analyze the effects of 8 energy efficiency measures (EEMs) on 81 different baseline small office building models in Holland, Michigan (climate zone 5A). The results of this analysis (totaling over 30,000 cases) are summarized in a simple spreadsheet tool that enables users to easily sort through the results and find appropriate small office EEM packages that meet a particular energy savings threshold and are likely to be cost-effective.

  6. Interactive Building Design Space Exploration Using Regionalized Sensitivity Analysis

    DEFF Research Database (Denmark)

    Østergård, Torben; Jensen, Rasmus Lund; Maagaard, Steffen

    2017-01-01

    simulation inputs are most important and which have negligible influence on the model output. Popular sensitivity methods include the Morris method, variance-based methods (e.g. Sobol’s), and regression methods (e.g. SRC). However, all these methods only address one output at a time, which makes it difficult...... in combination with the interactive parallel coordinate plot (PCP). The latter is an effective tool to explore stochastic simulations and to find high-performing building designs. The proposed methods help decision makers to focus their attention to the most important design parameters when exploring......Monte Carlo simulations combined with regionalized sensitivity analysis provide the means to explore a vast, multivariate design space in building design. Typically, sensitivity analysis shows how the variability of model output relates to the uncertainties in models inputs. This reveals which...

  7. Final Safety Analysis Report (FSAR) for Building 332, Increment III

    Energy Technology Data Exchange (ETDEWEB)

    Odell, B. N.; Toy, Jr., A. J.

    1977-08-31

    This Final Safety Analysis Report (FSAR) supplements the Preliminary Safety Analysis Report (PSAR), dated January 18, 1974, for Building 332, Increment III of the Plutonium Materials Engineering Facility located at the Lawrence Livermore Laboratory (LLL). The FSAR, in conjunction with the PSAR, shows that the completed increment provides facilities for safely conducting the operations as described. These documents satisfy the requirements of ERDA Manual Appendix 6101, Annex C, dated April 8, 1971. The format and content of this FSAR complies with the basic requirements of the letter of request from ERDA San to LLL, dated March 10, 1972. Included as appendices in support of th FSAR are the Building 332 Operational Safety Procedure and the LLL Disaster Control Plan.

  8. Reactor building seismic analysis of a PWR type - NPP

    International Nuclear Information System (INIS)

    Kakubo, Masao

    1983-01-01

    Earthquake engineering studies raised up in Brazil during design licensing and construction phases of Almirante Alvaro Alberto NPP, units 1 and 2. State of art of soil - structure interaction analysis with particular reference to the impedance function calculation analysis with particular reference to the impedance function calculation of a group of pile is presented in this M.Sc. Dissertation, as an example the reactor building dynamic response of a 1325 MWe NPP PWR type is calculated. The reactor building is supported by a pile foundation with 2002 end bearing piles. Upper and lower bound soil parameters are considered in order to observe their influence on dynamic response of structure. Dynamic response distribution on pile heads show pile-soil-pile interaction effects. (author)

  9. Comparative Analysis of Infrared Thermography and CFD Modelling for Assessing the Thermal Performance of Buildings

    Directory of Open Access Journals (Sweden)

    Carlos Morón

    2018-03-01

    Full Text Available Energy consumption in the building sector has increased significantly in the developed countries over the last decades. For this reason, the new European standards have become stricter in terms of energy saving. This paper establishes a comparison between using infrared thermography for technical building inspection and modelling with Computational Flow Dynamics (CFD tools for the study of thermal performance of the building. The results show that the use of this type of tools gives a reliable response with the difference in thermal changes lower than 0.5 °C with respect to the data taken in situ. Moreover, these simulators of flow dynamics allow to evaluate the efficiency of proposed measures for energy savings and to obtain a reliable approximation to thermal comfort applying the improvement, deepening in the surface analysis of infrared thermography before performing rehabilitation project. In this research, Predicted Mean Vote Index (PMV comfort index of 0.7 for a living room and 0.6 for a bedroom were obtained, that corresponds to C class that includes values in the range of −0.7 < PMV < 0.7 according to the standard UNE-EN 7730.

  10. On-Site Renewable Energy and Green Buildings: A System-Level Analysis.

    Science.gov (United States)

    Al-Ghamdi, Sami G; Bilec, Melissa M

    2016-05-03

    Adopting a green building rating system (GBRSs) that strongly considers use of renewable energy can have important environmental consequences, particularly in developing countries. In this paper, we studied on-site renewable energy and GBRSs at the system level to explore potential benefits and challenges. While we have focused on GBRSs, the findings can offer additional insight for renewable incentives across sectors. An energy model was built for 25 sites to compute the potential solar and wind power production on-site and available within the building footprint and regional climate. A life-cycle approach and cost analysis were then completed to analyze the environmental and economic impacts. Environmental impacts of renewable energy varied dramatically between sites, in some cases, the environmental benefits were limited despite the significant economic burden of those renewable systems on-site and vice versa. Our recommendation for GBRSs, and broader policies and regulations, is to require buildings with higher environmental impacts to achieve higher levels of energy performance and on-site renewable energy utilization, instead of fixed percentages.

  11. Ambient Response Analysis of the Heritage Court Tower Building Structure

    DEFF Research Database (Denmark)

    Brincker, Rune; Andersen, Palle

    2000-01-01

    In this paper an ambient response analysis of the Heritage Court Building structure is presented. The work is a part of a blind test organized by Professor Carlos Ventura, University of British Columbia. The response data were analyses using two different techniques: a non-parametric based on Fre...... modes, natural frequencies identified by the two techniques shoved good agreement, mode shape estimates were nearly identical, and damping ratios reasonably close and around 1-2% in the most cases....

  12. Ambient Response Analysis of the Heritage Court Tower Building Structure

    DEFF Research Database (Denmark)

    Brincker, Rune; Andersen, Palle

    2000-01-01

    In this paper an ambient response analysis of the Heritage Court Building structure is presented. The work is a part of a blind test organized by Professor Carlos Ventura, University of British Columbia. The response data were analyses using two different techniques: a non-parametric based...... modes, natural frequencies identified by the two techniques shoved good agreement, mode shape estimates were nearly identical, and damping ratios reasonably close and around 1-2% in the most cases....

  13. Climate cure 2020 measures and instruments to achieve Norwegian climate goals by 2020. Chapter 10 - the transport sector analysis

    Energy Technology Data Exchange (ETDEWEB)

    2010-11-15

    This document is a translation of Chapter 10, Sector analysis of transport, in the Norwegian report Climate Cure 2020, Measures and Instruments for Achieving Norwegian Climate Goals by 2020. The sector analysis has been prepared by an inter agency working group, conducted by the Norwegian Public Road Administration. (Author)

  14. Carbon dioxide emissions from the electricity sector in major countries: a decomposition analysis.

    Science.gov (United States)

    Li, Xiangzheng; Liao, Hua; Du, Yun-Fei; Wang, Ce; Wang, Jin-Wei; Liu, Yanan

    2018-03-01

    The electric power sector is one of the primary sources of CO 2 emissions. Analyzing the influential factors that result in CO 2 emissions from the power sector would provide valuable information to reduce the world's CO 2 emissions. Herein, we applied the Divisia decomposition method to analyze the influential factors for CO 2 emissions from the power sector from 11 countries, which account for 67% of the world's emissions from 1990 to 2013. We decompose the influential factors for CO 2 emissions into seven areas: the emission coefficient, energy intensity, the share of electricity generation, the share of thermal power generation, electricity intensity, economic activity, and population. The decomposition analysis results show that economic activity, population, and the emission coefficient have positive roles in increasing CO 2 emissions, and their contribution rates are 119, 23.9, and 0.5%, respectively. Energy intensity, electricity intensity, the share of electricity generation, and the share of thermal power generation curb CO 2 emissions and their contribution rates are 17.2, 15.7, 7.7, and 2.8%, respectively. Through decomposition analysis for each country, economic activity and population are the major factors responsible for increasing CO 2 emissions from the power sector. However, the other factors from developed countries can offset the growth in CO 2 emissions due to economic activities.

  15. Seismic Fragility Curves of Industrial Buildings by Using Nonlinear Analysis

    Directory of Open Access Journals (Sweden)

    Mohamed Nazri Fadzli

    2017-01-01

    Full Text Available This study presents the steel fragility curves and performance curves of industrial buildings of different geometries. The fragility curves were obtained for different building geometries, and the performance curves were developed based on lateral load, which is affected by the geometry of the building. Three records of far-field ground motion were used for incremental dynamic analysis (IDA, and the design lateral loads for pushover analysis (POA. All designs were based on British Standard (BS 5950; however, Eurocode 8 was preferred for seismic consideration in the analysis because BS 5950 does not specify any seismic provision. The five levels of performance stated by FEMA-273, namely, operational phase, immediate occupancy, damage control, life safety, and collapse prevention (CP were used as main guidelines for evaluating structural performance. For POA, Model 2 had highest base shear, followed by Model 1 and Model 3, even though Model 2 has a smaller structure compared with Model 3. Meanwhile, the fragility curves showed that the probability of reaching or exceeding the CP level of Model 2 is the highest, followed by that of Models 1 and 3.

  16. The public sector nursing workforce in Kenya: a county-level analysis.

    Science.gov (United States)

    Wakaba, Mabel; Mbindyo, Patrick; Ochieng, Jacob; Kiriinya, Rose; Todd, Jim; Waudo, Agnes; Noor, Abdisalan; Rakuom, Chris; Rogers, Martha; English, Mike

    2014-01-27

    Kenya's human resources for health shortage is well documented, yet in line with the new constitution, responsibility for health service delivery will be devolved to 47 new county administrations. This work describes the public sector nursing workforce likely to be inherited by the counties, and examines the relationships between nursing workforce density and key indicators. National nursing deployment data linked to nursing supply data were used and analyzed using statistical and geographical analysis software. Data on nurses deployed in national referral hospitals and on nurses deployed in non-public sector facilities were excluded from main analyses. The densities and characteristics of the public sector nurses across the counties were obtained and examined against an index of county remoteness, and the nursing densities were correlated with five key indicators. Of the 16,371 nurses in the public non-tertiary sector, 76% are women and 53% are registered nurses, with 35% of the nurses aged 40 to 49 years. The nursing densities across counties range from 1.2 to 0.08 per 1,000 population. There are statistically significant associations of the nursing densities with a measure of health spending per capita (P value = 0.0028) and immunization rates (P value = 0.0018). A higher county remoteness index is associated with explaining lower female to male ratio of public sector nurses across counties (P value public sector countrywide is complicated by mal-distribution and varying workforce characteristics (for example, age profile) across counties. All stakeholders should support improvements in human resources information systems and help address personnel shortages and mal-distribution if equitable, quality health-care delivery in the counties is to be achieved.

  17. Analysis of health sector gender equality and social inclusion strategy 2009 of Nepal.

    Science.gov (United States)

    Mahara, G B; Dhital, S R

    2014-01-01

    The policy on gender equality and social inclusion (GESI) in health sector of Nepal is formulated in 2009 targeting toward poor, vulnerable, marginalized social and ethnic groups. Gender inequality and social discrimination are a social problem that affect on individual health finally. The main objective of this paper is to critically analysis and evaluates the Government's strategy on health sector gender equality and social inclusion in Nepal. We collected published and unpublished information assessing the public health, policy analysis and research needs from different sources. A different policy approaches for the analysis and evaluation of GESI strategies is applied in this paper. Universal education, community participation, individual, group and mass communication approaches, and social capital are the key aspects of effective implementation of policy at target levels.

  18. Status and Outlook for Building Integrated Photovoltaics (BIPV) in Relation to Educational needs in the BIPV Sector

    NARCIS (Netherlands)

    Tabakovic, Momir; Fechner, Hubert; Van Sark, Wilfried; Louwen, Atse; Georghiou, George; Makrides, George; Loucaidou, Eliza; Ioannidou, Monica; Weiss, Ingrid; Arancon, Sofia; Betz, Stephanie

    2017-01-01

    This paper reviews the present status and outlook of the building integrated photovoltaics (BIPV) market on a global and European scale. In particular, it provides a comprehensive review of the market situation and the future trends for Austria, Cyprus, France, Germany, Italy and the Netherlands

  19. The consumption of electric power on the tertiary sector - an instrument for economical and social analysis and market studies

    International Nuclear Information System (INIS)

    Villela, L.E.

    1991-04-01

    The main subjective of this thesis is to analyse the effects of the growth of the tertiary sector on the electric power demand. In order to accomplish this goal an economical and social, analysis of the tertiary sector is made to identify its dynamic, its relations with the other sectors of the economy and to describe the methodologies for measuring the overall tertiary production. Afterwards it is made an analysis of the electric power consumption evolution in the tertiary sector, in order to identify the consumption per region of the country, per consumers and tertiary subsectors. It is also analysed the product power intensify and, finally its described the present tariff system. (author)

  20. Sensitivity analysis of water consumption in an office building

    Science.gov (United States)

    Suchacek, Tomas; Tuhovcak, Ladislav; Rucka, Jan

    2018-02-01

    This article deals with sensitivity analysis of real water consumption in an office building. During a long-term real study, reducing of pressure in its water connection was simulated. A sensitivity analysis of uneven water demand was conducted during working time at various provided pressures and at various time step duration. Correlations between maximal coefficients of water demand variation during working time and provided pressure were suggested. The influence of provided pressure in the water connection on mean coefficients of water demand variation was pointed out, altogether for working hours of all days and separately for days with identical working hours.

  1. Energy efficiency in the transport sector in the EU-27: A dynamic dematerialization analysis

    International Nuclear Information System (INIS)

    Ziolkowska, Jadwiga R.; Ziolkowski, Bozydar

    2015-01-01

    Energy use in the European Union's (EU) transport sector amounted to 340 Mtoe in 1999 with the following increasing trend up to 379 Mtoe in 2007 and a decrease from 2008 on, down to 365 Mtoe in 2010. This changing pattern posed several fundamental questions and uncertainties regarding the broader picture of energy efficiency and environmental protection. One of them refers to absolute changes in energy use efficiency in the transport sector over time and the ways of measuring efficiency. Traditional scientific approaches conceptualized to measure efficiency of energy use do not address annual dynamics of changes in the energy use in a given sector per capita. Thus, they are not precise enough for political and methodological purposes as they do not reflect the exact amount of energy consumed in the respective countries and societies. This paper shows a possible solution to this problem and a new perspective on measuring energy efficiency by using the product generational dematerialization (PGD) indicator. The PGD indicator allows for measuring energy efficiency as a dynamic change of consumption and population occurring simultaneously. Thus, it provides an extension to the traditional methodology commonly used for measuring efficiency. To visualize a practical application of this approach, the paper provides an example of evaluating energy efficiency in the transport sector in the EU-27 in 2000–2010. The results of the analysis show a clear materialization tendency in the transport sector (the energy consumption change exceeded the population growth) until 2007 and a reverse tendency (dematerialization) between 2008 and 2010. As energy consumption has a direct impact on environmental quality and exhaustion of natural resources, the paper points out the necessity of extending sustainable resource management policies by new methodologies and providing more efficient solutions for energy consumption in the transport sector. - Highlights: • PGD indicator proves a

  2. Organizational culture in the financial sector : evidence from a cross-industry analysis of employee personal values and career success

    NARCIS (Netherlands)

    van Hoorn, André

    2017-01-01

    We assess the organizational culture in the finance industry in relation to the global financial crisis (GFC) and consider the potential of cultural change to improve the financial sector. To avoid (response) biases, we build on the person-organization (P-O) fit literature and develop a novel,

  3. Ademe et Vous. International Newsletter No. 38, September 2016. Making the building sector part of the 2 deg. C strategy

    International Nuclear Information System (INIS)

    Martin, Valerie; Seguin-Jacques, Catherine; Tappero, Denis

    2016-09-01

    Launched in December 2015, during COP 21, the Global Alliance for Buildings and Construction, of which ADEME is a member, has properly grown and in 2016 is now operational. Its initial results are being put forward during COP 22 in November in Marrakech. Launched in December 2015, during COP 21, the Global Alliance for Buildings and Construction, of which ADEME is a member, has properly grown and in 2016 is now operational. Its initial results are being put forward during COP 22 in November in Marrakech. A new Franco-German energy platform has recently been set up as part of the cooperation memorandum signed by ADEME and their German counterpart, DENA. Its aim is to encourage industrial and technological partnerships between the two countries

  4. Civil-Society Organizations’ Capacity Building in the Local Governmental Sector: Is It Working? A Case Study

    Directory of Open Access Journals (Sweden)

    Máthé Réka Zsuzsánna

    2017-06-01

    Full Text Available The role that a strong civil society plays in socio-economic development is a subject of major scholarly attention today. Many benefits from having a strong civil society are reported in the literature. There is, however, no generally accepted view regarding how capacity-building efforts can help to develop a strong civil society, especially in the Central and Eastern European countries.

  5. Building and design defects observed in the residential sector and the types of damage observed in recent earthquakes in Turkey

    OpenAIRE

    M. Tolga Çöğürcü

    2015-01-01

    Turkey is situated in a very active earthquake region. In the last century, several earthquakes resulted in thousands of deaths and enormous economic losses. In 1999, the Marmara earthquake had an approximate death toll of more than 20 000, and in 2011, the Van earthquake killed 604 people. In general, Turkish residential buildings have reinforced concrete structural systems. These reinforced concrete structures have several deficiencies, such as low concret...

  6. Building and design defects observed in the residential sector and the types of damage observed in recent earthquakes in Turkey

    Science.gov (United States)

    Tolga Çöğürcü, M.

    2015-01-01

    Turkey is situated in a very active earthquake region. In the last century, several earthquakes resulted in thousands of deaths and enormous economic losses. In 1999, the Marmara earthquake had an approximate death toll of more than 20 000, and in 2011, the Van earthquake killed 604 people. In general, Turkish residential buildings have reinforced concrete structural systems. These reinforced concrete structures have several deficiencies, such as low concrete quality, non-seismic steel detailing, and inappropriate structural systems including several architectural irregularities. In this study, the general characteristics of Turkish building stock and the deficiencies observed in structural systems are explained, and illustrative figures are given with reference to Turkish Earthquake Code 2007 (TEC, 2007). The poor concrete quality, lack of lateral or transverse reinforcement in beam-column joints and column confinement zones, high stirrup spacings, under-reinforced columns and over-reinforced beams are the primary causes of failures. Other deficiencies include weak column-stronger beam formations, insufficient seismic joint separations, soft story or weak story irregularities and short columns. Similar construction and design mistakes are also observed in other countries situated on active earthquake belts. Existing buildings still have these undesirable characteristics, so to prepare for future earthquakes, they must be rehabilitated.

  7. Estimating size and scope economies in the Portuguese water sector using the Bayesian stochastic frontier analysis

    Energy Technology Data Exchange (ETDEWEB)

    Carvalho, Pedro, E-mail: pedrocarv@coc.ufrj.br [Computational Modelling in Engineering and Geophysics Laboratory (LAMEMO), Department of Civil Engineering, COPPE, Federal University of Rio de Janeiro, Av. Pedro Calmon - Ilha do Fundão, 21941-596 Rio de Janeiro (Brazil); Center for Urban and Regional Systems (CESUR), CERIS, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisbon (Portugal); Marques, Rui Cunha, E-mail: pedro.c.carvalho@tecnico.ulisboa.pt [Center for Urban and Regional Systems (CESUR), CERIS, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisbon (Portugal)

    2016-02-15

    This study aims to search for economies of size and scope in the Portuguese water sector applying Bayesian and classical statistics to make inference in stochastic frontier analysis (SFA). This study proves the usefulness and advantages of the application of Bayesian statistics for making inference in SFA over traditional SFA which just uses classical statistics. The resulting Bayesian methods allow overcoming some problems that arise in the application of the traditional SFA, such as the bias in small samples and skewness of residuals. In the present case study of the water sector in Portugal, these Bayesian methods provide more plausible and acceptable results. Based on the results obtained we found that there are important economies of output density, economies of size, economies of vertical integration and economies of scope in the Portuguese water sector, pointing out to the huge advantages in undertaking mergers by joining the retail and wholesale components and by joining the drinking water and wastewater services. - Highlights: • This study aims to search for economies of size and scope in the water sector; • The usefulness of the application of Bayesian methods is highlighted; • Important economies of output density, economies of size, economies of vertical integration and economies of scope are found.

  8. Determinants of energy demand in the French service sector: A decomposition analysis

    International Nuclear Information System (INIS)

    Mairet, Nicolas; Decellas, Fabrice

    2009-01-01

    This paper analyzes the changes in the energy consumption of the service sector in France over the period 1995-2006, using the logarithmic mean Divisia index I (LMDI I) decomposition method. The analysis is carried out at various disaggregation levels to highlight the specifics of each sub-sector and end-use according to their respective determinants. The results show that in this period the economic growth of the service sector was the main factor that led to the increase in total energy consumption. Structure, productivity, substitution and intensity effects restricted this growth, but with limited effect. By analyzing each end-use, this paper enables a more precise understanding of the impact of these factors. The activity effect was the main determinant of the increase in energy consumption for all end-uses except for air conditioning, for which the equipment rate effect was the main factor. Structural changes in the service sector primarily impacted energy consumption for space heating and cooking. Improvements in productivity limited the growth of energy consumption for all end-uses except for cooking. Finally, energy efficiency improvements mainly affected space-heating energy use.

  9. Analysis of hospital logistics and costs of the Clinical Engineering Sector in a Philanthropic Hospital

    Directory of Open Access Journals (Sweden)

    Antônio Artur de Souza

    2014-12-01

    Full Text Available Hospitals are considered complex organizations mainly due to the high cost of the health care structure employed for care. Reducing operating costs is a challenge for hospital managers. Particularly in the clinical engineering sector, adequate hospital logistics can reduce costs. In this context, the aim of the research was to analyze the activities of hospital logistics of the Clinical Engineering department at a charity hospital, focusing on cost reduction. The paper presents a case study in a large charity hospital located in the metropolitan region of Belo Horizonte, MG. The analysis focuses on the activities of hospital logistics at this hospital clinical engineering sector. The work in this sector is concentrated in the realization and implementation of equipment maintenance, to the detriment of efforts to reduce costs and increase safety for all streams managed by the sector. It was also found that there are risks of increased costs with inadequate routines: (i acquisition of new and large equipment; (ii maintenance and release schedule for use; and (iii the theft of equipment.

  10. Estimating size and scope economies in the Portuguese water sector using the Bayesian stochastic frontier analysis

    International Nuclear Information System (INIS)

    Carvalho, Pedro; Marques, Rui Cunha

    2016-01-01

    This study aims to search for economies of size and scope in the Portuguese water sector applying Bayesian and classical statistics to make inference in stochastic frontier analysis (SFA). This study proves the usefulness and advantages of the application of Bayesian statistics for making inference in SFA over traditional SFA which just uses classical statistics. The resulting Bayesian methods allow overcoming some problems that arise in the application of the traditional SFA, such as the bias in small samples and skewness of residuals. In the present case study of the water sector in Portugal, these Bayesian methods provide more plausible and acceptable results. Based on the results obtained we found that there are important economies of output density, economies of size, economies of vertical integration and economies of scope in the Portuguese water sector, pointing out to the huge advantages in undertaking mergers by joining the retail and wholesale components and by joining the drinking water and wastewater services. - Highlights: • This study aims to search for economies of size and scope in the water sector; • The usefulness of the application of Bayesian methods is highlighted; • Important economies of output density, economies of size, economies of vertical integration and economies of scope are found.

  11. Energy use efficiency in the Indian manufacturing sector: An interstate analysis

    International Nuclear Information System (INIS)

    Mukherjee, Kankana

    2008-01-01

    This paper approaches the measurement of energy efficiency from a production theoretic framework and uses Data Envelopment Analysis to measure energy efficiency in the Indian manufacturing sector. Using data from the Annual Survey of Industries for the years 1998-99 through 2003-04, the study compares the energy efficiency in manufacturing across states, based on several models. The results show considerable variation in energy efficiency across states. Comparing the results across our models, we find that the relative pricing of energy does not provide the appropriate incentives for energy conservation. A second-stage regression analysis reveals that states with a larger share of manufacturing output in energy-intensive industries have lower energy efficiency. Also, higher quality labor force associates with higher energy efficiency. Finally, the power sector reforms have not yet had any significant impact on achieving energy efficiency

  12. Applying a private sector capitation model to the management of type 2 diabetes in the South African public sector: a cost-effectiveness analysis.

    Science.gov (United States)

    Volmink, Heinrich C; Bertram, Melanie Y; Jina, Ruxana; Wade, Alisha N; Hofman, Karen J

    2014-09-30

    Diabetes mellitus contributes substantially to the non-communicable disease burden in South Africa. The proposed National Health Insurance system provides an opportunity to consider the development of a cost-effective capitation model of care for patients with type 2 diabetes. The objective of the study was to determine the potential cost-effectiveness of adapting a private sector diabetes management programme (DMP) to the South African public sector. Cost-effectiveness analysis was undertaken with a public sector model of the DMP as the intervention and a usual practice model as the comparator. Probabilistic modelling was utilized for incremental cost-effectiveness ratio analysis with life years gained selected as the outcome. Secondary data were used to design the model while cost information was obtained from various sources, taking into account public sector billing. Modelling found an incremental cost-effectiveness ratio (ICER) of ZAR 8 356 (USD 1018) per life year gained (LYG) for the DMP against the usual practice model. This fell substantially below the Willingness-to-Pay threshold with bootstrapping analysis. Furthermore, a national implementation of the intervention could potentially result in an estimated cumulative gain of 96 997 years of life (95% CI 71 073 years - 113 994 years). Probabilistic modelling found the capitation intervention to be cost-effective, with an ICER of ZAR 8 356 (USD 1018) per LYG. Piloting the service within the public sector is recommended as an initial step, as this would provide data for more accurate economic evaluation, and would also allow for qualitative analysis of the programme.

  13. Analysis of Embodied Environmental Impacts of Korean Apartment Buildings Considering Major Building Materials

    Directory of Open Access Journals (Sweden)

    Seungjun Roh

    2018-05-01

    Full Text Available Because the reduction in environmental impacts (EIs of buildings using life-cycle assessment (LCA has been emphasized as a practical strategy for the sustainable development of the construction industry, studies are required to analyze not only the operational environmental impacts (OEIs of buildings, but also the embodied environmental impacts (EEIs of building materials. This study aims to analyze the EEIs of Korean apartment buildings on the basis of major building materials as part of research with the goal of reducing the EIs of buildings. For this purpose, six types of building materials (ready-mixed concrete, reinforcement steel, concrete bricks, glass, insulation, and gypsum for apartment buildings were selected as major building materials, and their inputs per unit area according to the structure types and plans of apartment buildings were derived by analyzing the design and bills of materials of 443 apartment buildings constructed in South Korea. In addition, a life-cycle scenario including the production, construction, maintenance, and end-of-life stage was constructed for each major building material. The EEIs of the apartment buildings were quantitatively assessed by applying the life-cycle inventory database (LCI DB and the Korean life-cycle impact assessment (LCIA method based on damage-oriented modeling (KOLID, and the results were analyzed.

  14. Analysis of Final Energy Demand by Sector in Malaysia using MAED Model

    International Nuclear Information System (INIS)

    Kumar, M.; Muhammed Zulfakar Mohd Zolkaffly; Alawiah Musa

    2011-01-01

    Energy supply security is important in ensuring a long term supply to fulfill the growing energy demand. This paper presents the use of IAEA energy planning tool, Model for Analysis of Energy Demand (MAED) to analyze, simulate and compare final energy demand by five different sectors in Malaysia under some assumptions, bounds and restrictions and the outcome can be used for planning of energy supply in future. (author)

  15. Emotional Intelligence and Organisational Citizenship Behaviour of Manufacturing Sector Employees: An Analysis

    Directory of Open Access Journals (Sweden)

    Susan Tee Suan Chin

    2011-06-01

    Full Text Available As with diversity, collaboration, co-operation and teamwork havebecome increasingly important issues for management to handle.The purpose of this study is to analyse the level of Emotional Intelligenceand Organisational Citizenship Behaviour among middlemanagement employees in the Malaysian manufacturing sector.A total of 536 employees from different organisations and industriestook part in this survey. Based on the descriptive analysis,employees in some industries tended to have a lower level ofemotional intelligence and organisational citizenship behaviour.

  16. Comparative Analysis of Market Volatility in Indian Banking and IT Sectors by using Average Decline Model

    OpenAIRE

    Kirti AREKAR; Rinku JAIN

    2017-01-01

    The stock market volatility is depends on three major features, complete volatility, volatility fluctuations, and volatility attention and they are calculate by the statistical techniques. Comparative analysis of market volatility for two major index i.e. banking & IT sector in Bombay stock exchange (BSE) by using average decline model. The average degeneration process in volatility has being used after very high and low stock returns. The results of this study explain significant decline in...

  17. Technical efficiency of Spanish electrical sector: analysis of 1998-2001 period

    International Nuclear Information System (INIS)

    Gutierrez Moya, E.; Arevalo Quijada, M. T.

    2007-01-01

    The aim of this article is to analyse the technical efficiency of the energy Spanish sector in the course of the stage of liberalization (1998-2001). The study uses the non parametric approach of DEA (Data Envelopment Analysis) to derive Malaquist productivity indexes. In the study there is revealed the improvement of productivity of the mentioned companies, as well as the major differentiation between electrical considered companies. (Author) 23 refs

  18. Solar energy and Grenelle: to build a national sector and not to waste 62 billions Euros in uncontrolled subsidies

    International Nuclear Information System (INIS)

    Jourde, Patrick

    2008-01-01

    The author discusses the various financial supports and subsidies associated with renewable energies in France in 2007. He briefly discusses the benefit of solar energy in terms of carbon emission and in terms of housing architecture, and outlines the strong unbalance between these subsidies and R and D funding: this funding is only the tenth of the awarded subsidies. He shows that the various financial supports and subsidies have been misappropriated by importers, fitters and financiers, and also outlines that these supports are socially unfair. Then, the author proposes how to better distribute these supports and subsidies, and outlines the need for a stronger support awarded to R and D for a better development of this industrial sector

  19. ANALYSIS MODELS OF THE BANKRUPTCY RISK IN ROMANIA’S ENERGY SECTOR

    Directory of Open Access Journals (Sweden)

    MIRON VASILE CRISTIAN IOACHIM

    2015-12-01

    Full Text Available The risk, as a concept found in the economic sphere of business represents an analysis area often approached by researchers from the finance and accounting field. Although it is often seen, along with cost-effectiveness and value, as a fundamental element of finance (Stancu, I., 2007, the risk has often facets that make it useful also in analyzing other sides of the economic sphere of business, such as financial position and economic performance of it. From these meanings, we believe that the most suitable for this purpose is the one through which it is analyzed the ability of an entity to avoid bankruptcy. The present study has as main objectives the presentation of bankruptcy risk of an entity from a theoretical point of view and the analysis (from an empirical and comparative point of view through the scoring method of the implementation of various models for analyzing the risk of bankruptcy (Altman, Conan-holder, Taffler, Robertson in Romania’s energy sector, in order to issue an opinion regarding the optimal method for analyzing the bankruptcy risk in the energy sector. The results show that there are significant differences regarding the analysis of the bankruptcy risk through the appliction of different models, proposing the Conan-Holder model as the most appropriate for this sector.

  20. Industrial Disputes in the Construction Sector

    Directory of Open Access Journals (Sweden)

    L.J Perry

    2012-11-01

    Full Text Available The Cole Royal Commission enquiry into the building and construction (abbreviated to ‘construction’ sector recommended controversial workplace-relation reforms for that sector. The recommended changes are likely to be enshrined in legislation within the year. The Commission drew on analyses of industrial disputes that focused, in the main, on quite recent experience. This paper attempts to give a broader historical perspective on disputes in that sector by considering the pattern of disputes for the entire post-World War II period. Accordingly, data on disputes and employees during the entire period are gathered from Australian Bureau of Statistics current and archived sources. These data are classified according to sector (construction versus non-construction and analysed. It is found that the strike rate has, on average, been greater in the construction sector than in the non-construction sector. However, there have been periods during which disputes in the construction sector have been relatively low. The most recent period was during the period of the Accord (1983-96, during which the strike rate in the construction sector fell relatively strongly. The analysis of this relatively broad historical period draws attention, among other things, to the possibility that the sort of strategies employed during the Accord years – strategies of cooperation and consensus building – may provide a more effective means of bringing industrial peace to the workplace relations scene of the construction sector than policies that are relatively confrontational.

  1. Automatic generation and simulation of urban building energy models based on city datasets for city-scale building retrofit analysis

    International Nuclear Information System (INIS)

    Chen, Yixing; Hong, Tianzhen; Piette, Mary Ann

    2017-01-01

    Highlights: •Developed methods and used data models to integrate city’s public building records. •Shading from neighborhood buildings strongly influences urban building performance. •A case study demonstrated the workflow, simulation and analysis of building retrofits. •CityBES retrofit analysis feature provides actionable information for decision making. •Discussed significance and challenges of urban building energy modeling. -- Abstract: Buildings in cities consume 30–70% of total primary energy, and improving building energy efficiency is one of the key strategies towards sustainable urbanization. Urban building energy models (UBEM) can support city managers to evaluate and prioritize energy conservation measures (ECMs) for investment and the design of incentive and rebate programs. This paper presents the retrofit analysis feature of City Building Energy Saver (CityBES) to automatically generate and simulate UBEM using EnergyPlus based on cities’ building datasets and user-selected ECMs. CityBES is a new open web-based tool to support city-scale building energy efficiency strategic plans and programs. The technical details of using CityBES for UBEM generation and simulation are introduced, including the workflow, key assumptions, and major databases. Also presented is a case study that analyzes the potential retrofit energy use and energy cost savings of five individual ECMs and two measure packages for 940 office and retail buildings in six city districts in northeast San Francisco, United States. The results show that: (1) all five measures together can save 23–38% of site energy per building; (2) replacing lighting with light-emitting diode lamps and adding air economizers to existing heating, ventilation and air-conditioning (HVAC) systems are most cost-effective with an average payback of 2.0 and 4.3 years, respectively; and (3) it is not economical to upgrade HVAC systems or replace windows in San Francisco due to the city’s mild

  2. Regional Analysis of Building Distributed Energy Costs and CO2 Abatement: A U.S. - China Comparison

    Energy Technology Data Exchange (ETDEWEB)

    Mendes, Goncalo; Feng, Wei; Stadler, Michael; Steinbach, Jan; Lai, Judy; Zhou, Nan; Marnay, Chris; Ding, Yan; Zhao, Jing; Tian, Zhe; Zhu, Neng

    2014-04-09

    The following paper conducts a regional analysis of the U.S. and Chinese buildings? potential for adopting Distributed Energy Resources (DER). The expected economics of DER in 2020-2025 is modeled for a commercial and a multi-family residential building in different climate zones. The optimal building energy economic performance is calculated using the Distributed Energy Resources Customer Adoption Model (DER CAM) which minimizes building energy costs for a typical reference year of operation. Several DER such as combined heat and power (CHP) units, photovoltaics, and battery storage are considered. The results indicate DER have economic and environmental competitiveness potential, especially for commercial buildings in hot and cold climates of both countries. In the U.S., the average expected energy cost savings in commercial buildings from DER CAM?s suggested investments is 17percent, while in Chinese buildings is 12percent. The electricity tariffs structure and prices along with the cost of natural gas, represent important factors in determining adoption of DER, more so than climate. High energy pricing spark spreads lead to increased economic attractiveness of DER. The average emissions reduction in commercial buildings is 19percent in the U.S. as a result of significant investments in PV, whereas in China, it is 20percent and driven by investments in CHP. Keywords: Building Modeling and Simulation, Distributed Energy Resources (DER), Energy Efficiency, Combined Heat and Power (CHP), CO2 emissions 1. Introduction The transition from a centralized and fossil-based energy paradigm towards the decentralization of energy supply and distribution has been a major subject of research over the past two decades. Various concerns have brought the traditional model into question; namely its environmental footprint, its structural inflexibility and inefficiency, and more recently, its inability to maintain acceptable reliability of supply. Under such a troubled setting

  3. Factors Influencing the Organizational Stress among Teachers Working in Higher Education Sector in Kerala: An Empirical Analysis

    Science.gov (United States)

    Areekkuzhiyil, Santhosh

    2014-01-01

    The study aims to explore the various factors that influence the organizational stress of teachers working in higher education sector in the state of Kerala. The data required for the study has been conveniently collected from 200 teachers working in higher education sector. Exploratory factor analysis revealed nine factors, which significantly…

  4. Residential and commercial buildings

    Energy Technology Data Exchange (ETDEWEB)

    Svendsen, Svend; Furbo, S.

    2012-11-15

    Low-energy buildings can make a major contribution to general sustainable development by providing a solution to problems related to the use of fossil fuels. The EPBD (EU Directive on Energy Performance of Buildings) requirements that by 2020 new building shall be constructed to use nearly zero energy, and no fossil fuels, can be accomplished by combining low-energy buildings with renewable energy via low-temperature district heating in cities and suburbs, and via heat pumps for low-density settlements. Based on experience with passive houses, low-energy buildings meeting the energy performance requirements of 2020 are expected to cost only a few percent more than conventional buildings. The very large and rapid changes needed in the energy performance of buildings is a challenge for the building sector, but one that can be overcome by better methods of developing products and designing, constructing and operating buildings. Simulation-based analysis and optimisation, and considerations of durability, will be important here. Building may thus be transformed from an experience-based sector to one based on knowledge and research, with high-quality sustainable products and good business opportunities. (Author)

  5. Dynamic analysis of a reactor building on alluvial soil

    International Nuclear Information System (INIS)

    Arya, A.S.; Chandrasekaran, A.R.; Paul, D.K.

    1977-01-01

    The reactor building consists of reinforced concrete internal framed structure enclosed in double containment shells of prestressed and reinforced concrete all resting on a common massive raft. The external cylindrical shell is capped by a spherical dome while the internal shell carries a cellular grid slab. The building is partially buried under ground. The soil consists of alluvial going to 1000 m depth. The site lies in a moderate seismic zone. The paper presents the dynamic analysis of the building including soil-structure interaction. The mathematical model consists of four parallel, suitably interconnected structures, namely inner containment, outer containment, internal frame and the calandria vault. Each one of the parallel structures consists of lumped-mass beam elements. The soil below the raft and on the sides of outer containment shell is represented by elastic springs in both horizontal and vertical directions. The various assumptions required to be made in developing the mathematical model are briefly discussed in the paper. Transfer matrix technique has been used to determine the frequencies and mode shapes. The deformations due to bending, shear and effect of the rotary inertia have been included. Various alternatives of laterally interconnecting the internals and the shells have been examined and the best alternative from earthquake considerations has been obtained. In the study, the effect of internal structure flexibility and Calandria vault flexibility on the whole building have been studied. The resulting base raft motion and the structural timewise response of all floors have been determined for the design basis (safe shutdown) earthquake by mode superposition

  6. A factor analysis to detect factors influencing building national brand

    Directory of Open Access Journals (Sweden)

    Naser Azad

    Full Text Available Developing a national brand is one of the most important issues for development of a brand. In this study, we present factor analysis to detect the most important factors in building a national brand. The proposed study uses factor analysis to extract the most influencing factors and the sample size has been chosen from two major auto makers in Iran called Iran Khodro and Saipa. The questionnaire was designed in Likert scale and distributed among 235 experts. Cronbach alpha is calculated as 84%, which is well above the minimum desirable limit of 0.70. The implementation of factor analysis provides six factors including “cultural image of customers”, “exciting characteristics”, “competitive pricing strategies”, “perception image” and “previous perceptions”.

  7. Image Chunking: Defining Spatial Building Blocks for Scene Analysis.

    Science.gov (United States)

    1987-04-01

    mumgs0.USmusa 7.AUWOJO 4. CIUTAC Rm6ANT Wuugme*j James V/. Mlahoney DACA? 6-85-C-00 10 NOQ 1 4-85-K-O 124 Artificial Inteligence Laboratory US USS 545...0197 672 IMAGE CHUWING: DEINING SPATIAL UILDING PLOCKS FOR 142 SCENE ANRLYSIS(U) MASSACHUSETTS INST OF TECH CAIIAIDGE ARTIFICIAL INTELLIGENCE LAO J...Technical Report 980 F-Image Chunking: Defining Spatial Building Blocks for Scene DTm -Analysis S ELECTED James V. Mahoney’ MIT Artificial Intelligence

  8. Structural Analysis and Seismic Design for Cold Neutron Laboratory Building

    International Nuclear Information System (INIS)

    Wu, Sangik; Kim, Y. K.; Kim, H. R.

    2007-05-01

    This report describes all the major results of the dynamic structural analysis and seismic design for the Cold Neutron Laboratory Building which is classified in seismic class II. The results are summarized of the ground response spectrum as seismic input loads, mechanical properties of subsoil, the buoyancy stability due to ground water, the maximum displacement of the main frame under the seismic load and the member design. This report will be used as a basic design report to maintenance its structural integrity in future

  9. A BRIEF ANALYSIS OF THE TOURISM SECTOR - CURRENT TRENDS AND ISSUES IN THE BULGARIAN TOURIST BUSINESS

    Directory of Open Access Journals (Sweden)

    Kostadin Valkov

    2016-03-01

    Full Text Available Thе analysis presented in current article deepens and summarizes the results of an economic study focused on the management of human resources in the sector "Tourism". The expected changes in organizational and technological terms are taken into account. The law on tourism in the Republic of Bulgaria and the types of taxes that directly and indirectly affect those employed in tourism are considered. Leading accents are the current trends and issues that arise from the lack of skilled workers in this sector and their deficit caused by the seasonal nature of employment. Growing gray economy is concerned as a major obstacle to development of the tourism industry and its future.

  10. Competitive Strategies in the Luxury Sector: a Qualitative Comparative Analysis on the Fashion Industry

    Directory of Open Access Journals (Sweden)

    Margherita ANGIONI

    2017-07-01

    Full Text Available Despite the difficult economic period, companies in luxury sector are showing better results than those in the consumer products market. The objective of this paper is to analyse the competitive strategies in the luxury sector and in particular, in the personal luxury. To this end, we have chosen to study the case of an Italian company (Tod's Group, leader in the personal luxury according to consumers perception. Basing on a theoretical model of competitive strategy, this study shows a comparison with the strategic choices of three main competitors of Tod's, which offer products with similar values (Made in Italy, exclusivity and high craftsmanship; they are listed companies; they derive from a family business and the family still holds the company's control. The analysis highlights the ability of the Tod's Group in valorizing its capabilities and skills, and the ability of the management to exploit the available relational network.

  11. Geospatial Analysis Platform and tools: supporting planning and decision making across scales, borders, sectors and disciplines

    CSIR Research Space (South Africa)

    Naude, AH

    2008-04-01

    Full Text Available observation and geospatial analysis technologies, as well as the associated need for spatially explicit and sectorally integrated growth and development plans (including plans that deal with multi-scale or cross-border issues), the required statistical... planning. This requires planning and analysis that can (1) facilitate the sharing of spatial and other data, (2) deal with multi-scale or cross-border issues, as well as can (3) support the understanding of patterns and inter-regional dynamics at regional...

  12. Economic Drought Impact on Agriculture: analysis of all agricultural sectors affected

    Science.gov (United States)

    Gil, M.; Garrido, A.; Hernández-Mora, N.

    2012-04-01

    The analysis of drought impacts is essential to define efficient and sustainable management and mitigation. In this paper we present a detailed analysis of the impacts of the 2004-2008 drought in the agricultural sector in the Ebro river basin (Spain). An econometric model is applied in order to determine the magnitude of the economic loss attributable to water scarcity. Both the direct impacts of drought on agricultural productivity and the indirect impacts of drought on agricultural employment and agroindustry in the Ebro basin are evaluated. The econometric model measures losses in the economic value of irrigated and rainfed agricultural production, of agricultural employment and of Gross Value Added both from the agricultural sector and the agro-industrial sector. The explanatory variables include an index of water availability (reservoir storage levels for irrigated agriculture and accumulated rainfall for rainfed agriculture), a price index representative of the mix of crops grown in each region, and a time variable. The model allows for differentiating the impacts due to water scarcity from other sources of economic losses. Results show how the impacts diminish as we approach the macro-economic indicators from those directly dependent on water abstractions and precipitation. Sectors directly dependent on water are the most affected with identifiable economic losses resulting from the lack of water. From the management perspective implications of these findings are key to develop mitigation measures to reduce drought risk exposure. These results suggest that more open agricultural markets, and wider and more flexible procurement strategies of the agro-industry reduces the socio-economic exposure to drought cycles. This paper presents the results of research conducted under PREEMPT project (Policy relevant assessment of the socioeconomic effects of droughts and floods, ECHO - grant agreement # 070401/2010/579119/SUB/C4), which constitutes an effort to provide

  13. Build up of Radioactive Krypton and Xenon Analysis System

    International Nuclear Information System (INIS)

    Lee, D. K.; Choi, C. S.; Chung, K. H.; Lee, W.; Cho, Y. H.; Lee, C. W.

    2008-03-01

    The objective of this project is to build up an analysis system to measure the activity of the atmospheric radioactive krypton and xenon in Korea. The work scopes of the project include the purchase and the installation of the analysis system to measure the activity of the radioactive krypton and xenon in air, and the establishment of the operation capability of the system through the training of the operator. The system consists of two air sampling systems, and one radioactivity analysis system, which incorporates the enrichment system, the gas chromatography to purify a mixture gas, and the gas proportional counter to count the activity of pure krypton and xenon gas. As planned originally, the establishment of the analysis system has been completed. At present, one air sampler is successfully being operated at a specific site of the South Korea to measure the background radioactivities of Kr-85 and Xe-133 in air. The other air sampler is being reserved at the KAERI in the Daejeon for a emergency like the second nuclear test of the North Korea. During the normal time, the reserved air sampler will be used to collect the air sample for the performance test of the analysis system and the cross analysis for the calibration of the system. The radioactivity analysis system has been installed at the KAERI, and is being used to measure the activity of Kr-85 and Xe-133 in the air sample from a domestic site

  14. Lightning protection system analysis at Multipurpose Reactor G A. Siwabessy building

    International Nuclear Information System (INIS)

    Teguh-Sulistyo

    2003-01-01

    Analysis to the part of lightning protection system at Multi Purpose Reactor GA Siwabessy (RSG-GAS) have been done. Observation examined the damage of some part of the earthing system caused by human error of chemically system. The analysis performed some assumptions and simulations to the points of lightning stroke. From this analysis obtained that the reactor building do not have vertical finial which can protect effectively to the whole reactor building and auxiliary building. Installing some new finials at some places are needed to protect building therefore the reactor building and auxiliary building well safe from lighting stroke

  15. Scintiscanning of arthritis and analysis of build-up curves

    International Nuclear Information System (INIS)

    Yamagishi, Tsuneo; Omori, Shigeo; Miyawaki, Haruo; Maniwa, Masato; Yoshizaki, Kenichi

    1975-01-01

    In the present study 40 knee joints with rheumatoid arthritis, 23 knee joints with osteoarthrosis deformans, 3 knee joints with non-synovitis, one knee joint with pyogenic arthritis and 4 normal knee joints were scanned. By analysis of build-up curves obtained immediately after the intravenous injection of sup(99m)Tc-pertechnetate, the rate of accumulation of radioactivity (t 1/2) in the affected joints was simultaneously estimated in order to compare them with clinical findings. 1. Scintiscanning of arthritis, rheumatoid arthritis, osteoarthrosis deformans of the knee joint, non-specific synovitis, and pyogenic arthritis of the knee joint, yielded a positive scan for all of the joint diseases. 2. In the scintigram of healthy knee joints, there are no areas of RI accumulation or right to left difference. 3. In some instances abnormal uptake of RI was seen on scintigrams of arthritis even after normal clinical and laboratory findings had been achieved with therapy. 4. sup(99m)Tc-pertechnetate, a radionuclide with a short half-life, allows repeated scans and provides a useful radiologic means of evaluating therapeutic course and effectiveness. 5. Analysis of build-up curves revealed that the rate of accumulation of RI was faster in rheumatoid arthritis than in osteoarthrosis deformans. (auth.)

  16. Analysis of Production Funds Efficiency in the Country’s Crane Sector

    Directory of Open Access Journals (Sweden)

    Edita Valėnaitė

    2012-07-01

    Full Text Available The article deals with methodological aspects of the production funds analysis. In this work the study of literature which examines the basic and transferable funds is presented. Much attention is paid to the analysis of basic production funds in the crane sector. Analysis of the basic production funds in the country’s crane sector is presented. Special attention is paid to the structure of the cranes park and crane utilization efficiency. In the analysis of basic production funds, the factors that impede the efficiency of production funds were established as follows: the greatest negative impact on basic production funds efficiency of businesses was in small tower crane fleet; a small range of tower cranes in the park is reducing the technical possibilities of the lease. Basing on the analysis and observation of tower cranes installation and dismantling, the poor supply of the parts for the work place, lack of competence and motivation of the support staff have been ascertained. After elimination of these factors it is possible to raise the efficiency of the main production funds.Article in Lithuanian

  17. Gamification and Visualization of Sensor Data Analysis in Research Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Stone, Jackson A [ORNL; Sanyal, Jibonananda [ORNL; Castello, Charles C [ORNL; New, Joshua Ryan [ORNL

    2015-01-01

    The use of video game elements in non-gaming systems, or gamification , has potential value in transforming data analysis. Our study focused on creating a web-based videogame that models two physical test buildings, each of which contains hundreds of sensors. After the application renders the models, the player can walk through the environments and interact with the virtual representations of the sensors inside. Rather than trudging through a database with textual commands and screens full of data, the user can (virtually) walk up to a sensor and view its data graphically. But these features only scratch the surface of what is possible using our new gamification approach. We anticipate being able to show that recent progress in game design techniques and capacities can contribute to the field of analysis through gamification. The net result could be more stimulating, intuitive, user-friendly interfaces, as well as potentially more informative and insightful applications.

  18. Evaluating knowledge outsourcing performance Of public sectors with data envelopment Analysis

    Directory of Open Access Journals (Sweden)

    Liu, Hong-Cheng

    2014-11-01

    Full Text Available With the governmental sectors imitating the reformation of enterprises stressing on Knowledge, Contracting Out and Deregulation have become the core policies. Contracting Out is not based on the arbitrariness of an administrator, but the selective efficiency and competition. Connecting the resources between Public and Private Sectors is a concern of Contracting Out, while Knowledge Outsourcing is an innovation to enhance organizational knowledge and the reduction of organizational ignorance. Based on a Knowledge Outsourcing Investigation by the Kaohsiung City Government (Taiwan in the past few years, Data Envelopment Analysis (DEA and Sensitivity Analysis are integrated for measuring the total efficiency (TE, pure technical efficiency (PTE, and scale efficiency (SE of Knowledge Outsourcing of the sectors in the Kaohsiung City Government for the improvement reference of other counties and cities. From the message acquired from the efficiency and variables with the DEA, one DMU (Data Management Unit, or about 5% of all DMUs, appears to have strong Knowledge Outsourcing efficiency 1, showing favorable Knowledge Outsourcing efficiency. Two DMUs, comprising about 10% of all DMUs, reveal the marginal Knowledge Outsourcing inefficiency between 0.9 and 1. This implies that such sectors could better enhance the Knowledge Outsourcing efficiency. 17 DMUs, representing about 85% of all DMUs, exhibit an obvious Knowledge Outsourcing inefficiency of less than 0.9, so that the Finance and Transportation Bureaus present the lowest Knowledge Outsourcing efficiency.En la medida en que el sector público imita la reforma de aquellas empresas que ponen el acento en el conocimiento, la subcontratación y la desregulación se han convertido en las principales políticas. La subcontratación no se basa en la arbitrariedad de un gestor público, sino en la eficacia selectiva y la competencia. El interés de la subcontratación consiste en poner en contacto los recursos

  19. Job Satisfaction Analysis of Faculty Members in Public Sector Engineering Universities: An Empirical Investigation

    Directory of Open Access Journals (Sweden)

    AMEER ALI SHAHANI

    2017-07-01

    Full Text Available Most of the researchers have conducted study on the job satisfaction of the faculty members in Non? Engineering Universities only few have paid their attention in the Public Sector Engineering Universities. This study is the first attempt towards the research on faculty members? job satisfaction in public sector engineering universities of Sindh, Pakistan. The focus of this research is to assess the faculty members?job satisfaction on the perspectives of different factors i.e. compensation, research and technology, management style, recognition, working environment, in-service teaching training. The data was collected and analyzed using SPSS version 17.0 on five point likert scale. Regression, Correlation and ANOVAs (Analysis of Variance tests were conducted. Results showed that faculty members of the public sector engineering universities have lower job satisfaction. The finding suggested that, the study is useful for the management of universities in order to rectify the areas of dissatisfaction and to tackle the issues related to the faculty members regarding their job satisfaction.

  20. Estimating size and scope economies in the Portuguese water sector using the Bayesian stochastic frontier analysis.

    Science.gov (United States)

    Carvalho, Pedro; Marques, Rui Cunha

    2016-02-15

    This study aims to search for economies of size and scope in the Portuguese water sector applying Bayesian and classical statistics to make inference in stochastic frontier analysis (SFA). This study proves the usefulness and advantages of the application of Bayesian statistics for making inference in SFA over traditional SFA which just uses classical statistics. The resulting Bayesian methods allow overcoming some problems that arise in the application of the traditional SFA, such as the bias in small samples and skewness of residuals. In the present case study of the water sector in Portugal, these Bayesian methods provide more plausible and acceptable results. Based on the results obtained we found that there are important economies of output density, economies of size, economies of vertical integration and economies of scope in the Portuguese water sector, pointing out to the huge advantages in undertaking mergers by joining the retail and wholesale components and by joining the drinking water and wastewater services. Copyright © 2015 Elsevier B.V. All rights reserved.

  1. An analysis of Grenada's power sector and energy resources: a role for renewable energy technologies?

    International Nuclear Information System (INIS)

    Wiesser, D.

    2004-01-01

    Presently, Grenada's power sector is fully dependent on fossil fuel imports for meeting the country's electricity demand. Electric utilities in Small Island Developing States (SIDS), in general, face high cost of electricity generation due to diseconomies of scale in production, consumption and logistical aspects. Grenada's private power monopoly is no exception and the high cost of import dependent electricity generation places an increasing burden on economic development. In light of rapid technological and economic improvement of renewable energy technologies (RETs), the country's abundant sources of renewable energy should be harnessed. Benefits are envisaged to include lower electricity cost, better environmental performance and a safer and diversified supply of energy. However, barriers for shifting power production towards meaningful contributions from RETs exist, both in government and industry. This work analyses important economic interactions between the power sector and economic development, bringing to attention the importance of power sector reform. Further, present problems of integrating RETs into the grid, ranging from technical and regulatory issues to shareholder interest are investigated. A summary and analysis of past research into renewable sources of energy (RES) underscore the potential for power production from RETs in Grenada. (author)

  2. LMDI Decomposition Analysis of Energy Consumption in the Korean Manufacturing Sector

    Directory of Open Access Journals (Sweden)

    Suyi Kim

    2017-02-01

    Full Text Available The energy consumption of Korea’s manufacturing sector has sharply increased over the past 20 years. This paper decomposes the factors influencing energy consumption in this sector using the logarithmic mean Divisia index (LMDI method and analyzes the specific characteristics of energy consumption from 1991 to 2011. The analysis reveals that the activity effect played a major role in increasing energy consumption. While the structure and intensity effects contributed to the reduction in energy consumption, the structure effect was greater than the intensity effect. Over the periods, the effects moved in opposite directions; that is, the structure effect decreased when the intensity effect increased and vice versa. The energy consumption by each industry is decomposed into two factors, activity and intensity effects. The increase of energy consumption due to the activity effect is largest in the petroleum and chemical industry, followed by the primary metal and non-ferrous industry, and the fabricated metal industry. The decrease of energy consumption due to the intensity effect is largest in the fabricated metal industry, followed by the primary metal and non-ferrous industry, and the non-metallic industry. The energy consumption due to intensity effect in the petroleum and chemical industry has risen. To save energy consumption more efficiently for addressing climate change in this sector, industrial restructuring and industry-specific energy saving policies should be introduced.

  3. Reregulation of the Swedish pharmacy sector-A qualitative content analysis of the political rationale.

    Science.gov (United States)

    Wisell, Kristin; Winblad, Ulrika; Sporrong, Sofia Kälvemark

    2015-05-01

    In 2009, a reregulation of the Swedish pharmacy sector took place, and a fundamental change in ownership and structure followed. The reregulation provides an opportunity to reveal the politicians' views on pharmacies. The aim of this study was to explore and analyze the political arguments for the reregulation of the Swedish pharmacy sector in 2009. The method used was a qualitative content analysis of written political documents regarding the reregulation. The primary rationales for the reregulation were better availability, efficiency, price pressure, and safe usage of medicines. During the preparatory work, the rationales of diversity on the market and entrepreneurship were added, while the original rationales of efficiency, price pressure, and better usage of medicines were abandoned. The reform can be seen as a typical New Public Management reform influenced by the notion that private actors are better equipped to perform public activities. The results point to that the reform was done almost solely in order to introduce private ownership in the pharmacy sector, and was not initiated in order to solve any general problems, or to enhance patient outcomes of medicine use. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  4. Capacity building for the space sector: Microsatellite as a way forward. The example of the university of sains Malaysia

    Science.gov (United States)

    Faizal Allaudin, Mohd; Peter, Nicolas; Azlin Md Said, Md; Nor, Khalid

    2005-07-01

    Due to the large capital investment and high risk generally associated with space activities only a limited number of countries have been able to benefit from the use of space technology. Space technology is often seen as an important tool to allow the transition from a developing country to a developed country. As Malaysia's vision is to be a developed country by 2020, it need to enhance the capability and capacity of its space technology at an accelerated pace. At this stage, Malaysia can be considered as new in space activities, since the first satellite successfully launched into orbit was only in 1997. This paper describes a microsatellite project undertaken in a university environment in Malaysia by the School of Aerospace Engineering from the University of Sains Malaysia (USM) where the students will be participating in the development and operations. Such involvement aim at forming an integral part of the students education extending the traditional way of teaching with practical classes thus providing hands-on experience and offering skills and experience needed by the future Malaysian space workforce, and to expand Malaysian space capacity building.

  5. Essays in economics of energy efficiency in residential buildings - An empirical analysis[Dissertation 17157

    Energy Technology Data Exchange (ETDEWEB)

    Jakob, M.

    2007-07-01

    for policy priority setting and design, for inputs in energy models, and for building owners, developers and builders as decision support elements. Scope of the research was the sector of new and existing residential buildings in Switzerland. Based on price and technical data of additional insulation, improved window, ventilation and heating systems, and architectural concepts, it was found that the marginal and average costs of energy efficiency are to a large extent below or in the range of the marginal costs of energy (heat) generation, especially from a societal perspective. Many energy efficiency investments are economically viable also from a private perspective; particularly if best practice is applied and if long-term considerations are being made. The flat character of the curve of annualized capital and energy costs as a function of increasing energy efficiency levels implies that advanced energy efficiency levels are as cost-effective as low ones, having the advantage of a decreased energy price risk exposure. (...) The analysis of the total benefits of energy efficiency attributes from the building user perspective such as increased thermal comfort, constantly high indoor air quality, protection from external noise nuisance, property value and energy price risk hedging, revealed a considerable willingness-to-pay of a relevant proportion of home-purchasers and tenants for these benefits, making such investments also attractive for multi-family house owners due to potentially increased rental revenues. The willingness-to-pay, which was estimated by a choice experiment based on stated preferences, is generally higher than the costs of implementing these attributes. Particularly, this applies also to housing ventilation systems which makes them economically interesting although their costs cannot be covered by energy cost savings alone. The low-cost energy efficiency potentials and the considerable valuation of their benefits by a large proportion of the

  6. Job/Task Analysis: Enhancing the Commercial Building Workforce Through the Development of Foundational Materials; Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Studer, D.; Kemkar, S.

    2012-09-01

    For many commercial building operation job categories, industry consensus has not been reached on the knowledge, skills, and abilities that practitioners should possess. The goal of this guidance is to help streamline the minimum competencies taught or tested by organizations catering to building operations and maintenance personnel while providing a basis for developing and comparing new and existing training programs in the commercial building sector. The developed JTAs will help individuals identify opportunities to enhance their professional skills, enable industry to identify an appropriately skilled workforce, and allow training providers to ensure that they are providing the highest quality product possible.

  7. The Impact Analysis of Direct Public R&D and Innovation Investments in Turkish Space Sector

    Science.gov (United States)

    Kaya, Derya; Cakir, Serhat

    2016-07-01

    According to The Organisation for Economic Co-operation and Development (OECD), space sector plays a pivotal role in the functioning of modern societies and their economic development. It is in the scope of OECD's International Futures Programme. The global space economy, as defined by the OECD Space Forum, comprises the space industry's core activities in space manufacturing and in satellite operations, plus other consumer activities that have been derived over the years from governmental research and development. In 2013 commercial revenues generated by the space economy amounted to USD 256.2 billion globally that is huge amount of space investment in the world. Recently, Turkey has also entered to the sector and it has growing strategic interest in space. First satellite project was started with a technology transfer from UK by TUBITAK Space Technologies Research Institute in 2001 and it launched to its orbit in 2003. Then RASAT and GÖKTÜRK-2 satellites were developed and launched to their orbits respectively in 2011 and 2012. Today, we have other satellite projects that are going on, too. However, we do not have a mechanism or a model to assess the impacts of those projects. What kind of model can be used to measure the impact of direct public R&D and innovation investments in Turkish space sector? The aim of this study is to develop a model which would be useful for monitoring the performance of R&D and Innovation investments that are conducted through government policies and strategies and so on to give feedback for effective strategy making. When we look at the impact analysis studies in Turkey, we see a few such as TUBITAK (Özçelik and Taymaz, 2008; Erden, 2010; Tandoǧan, 2011), İşkur (World Bank Report, 2013), Ministry of Economy (TTGV, 2013), Development Agencies (İZKA, 2011; Elçi vd., 2011; Pınar, 2014; Meydan, 2014). There is need for a systematic approach to impact analysis. Since there is no data for this study, we would develop a model with

  8. From Product to System Approaches in European Sustainable Product Policies: Analysis of the Package Concept of Heating Systems in Buildings

    Directory of Open Access Journals (Sweden)

    Maria Calero-Pastor

    2017-09-01

    Full Text Available Different policies with the goal of reducing energy consumption and other environmental impacts in the building sector coexist in Europe. Sustainable product polices, such as the Ecodesign and Energy Labelling Directives, have recently broadened the scope of their target product groups from a strict product approach to extended product and system approaches. Indeed, there is a potential for greater savings when the focus is at a system level rather than on regulating individual products. Product policies for space and water heating systems have recently introduced and implemented the package label, which is a modular approach, standing between the extended product and the system approaches. This paper presents a systematic analysis of the different system approaches of various policies from an engineering perspective. It analyses in detail the package concept and its features through a practical application using a real case study. It focuses on how the package concept can support decisions made in the building design phase and, in particular, how can support the choice of appropriate components based on estimating system performances. This brings building engineers and regulators closer regarding the use of more consistent data on energy performance. Finally, this paper highlights the need to improve the alignment of the building-related product policies with the Energy Performance of Buildings Directive.

  9. The impact of niche green developments in transforming the building sector: The case study of Lochiel Park

    International Nuclear Information System (INIS)

    Berry, Stephen; Davidson, Kathryn; Saman, Wasim

    2013-01-01

    Energy use in residential buildings is a significant contributor to global carbon emissions. The South Australian Government responded to concern for anthropogenic greenhouse gas emissions by creating a model development of near zero energy homes in a near zero carbon impact estate. The creation of the Lochiel Park Green Village challenged a collective of industry experts and policy makers to set objectives, performance targets and regulatory guidelines outside existing institutional and professional norms. Literature suggests that the creation of niche events can help the transition away from dominant technologies, practices and beliefs, and lead to organisations embracing new tools, construction practices, technologies, standards and policies. By applying a multi-level socio-technical framework, and utilising evidence collected from a series of interviews with key government and industry leaders, this paper examines how, under the influence of landscape pressures, structural change at the regime level can come from the incubation of ideas and experiences at the niche level. The available evidence finds that the creation of the Lochiel Park Green Village has allowed many individuals and organisations to gain a more detailed and practical understanding of sustainable housing, and has given organisations the confidence to change industry practices, government policies, and regulatory standards. -- Highlights: •We examined the impact of creating a net zero carbon residential development. •Structural change can come from incubation of experiences at the niche level. •Significant barriers to sustainability can be overcome through leadership. •Performance targets were set outside existing institutional and professional norms. •Niche events help transition from dominant technologies, practices and beliefs

  10. Factors Affecting Green Residential Building Development: Social Network Analysis

    Directory of Open Access Journals (Sweden)

    Xiaodong Yang

    2018-05-01

    Full Text Available Green residential buildings (GRBs are one of the effective practices of energy saving and emission reduction in the construction industry. However, many real estate developers in China are less willing to develop GRBs, because of the factors affecting green residential building development (GRBD. In order to promote the sustainable development of GRBs in China, this paper, based on the perspective of real estate developers, identifies the influential and critical factors affecting GRBD, using the method of social network analysis (SNA. Firstly, 14 factors affecting GRBD are determined from 64 preliminary factors of three main elements, and the framework is established. Secondly, the relationships between the 14 factors are analyzed by SNA. Finally, four critical factors for GRBD, which are on the local economy development level, development strategy and innovation orientation, developer’s acknowledgement and positioning for GRBD, and experience and ability for GRBD, are identified by the social network centrality test. The findings illustrate the key issues that affect the development of GRBs, and provide references for policy making by the government and strategy formulation by real estate developers.

  11. Acquisition System Verification for Energy Efficiency Analysis of Building Materials

    Directory of Open Access Journals (Sweden)

    Natalia Cid

    2017-08-01

    Full Text Available Climate change and fossil fuel depletion foster interest in improving energy efficiency in buildings. There are different methods to achieve improved efficiency; one of them is the use of additives, such as phase change materials (PCMs. To prove this method’s effectiveness, a building’s behaviour should be monitored and analysed. This paper describes an acquisition system developed for monitoring buildings based on Supervisory Control and Data Acquisition (SCADA and with a 1-wire bus network as the communication system. The system is empirically tested to prove that it works properly. With this purpose, two experimental cubicles are made of self-compacting concrete panels, one of which has a PCM as an additive to improve its energy storage properties. Both cubicles have the same dimensions and orientation, and they are separated by six feet to avoid shadows. The behaviour of the PCM was observed with the acquisition system, achieving results that illustrate the differences between the cubicles directly related to the PCM’s characteristics. Data collection devices included in the system were temperature sensors, some of which were embedded in the walls, as well as humidity sensors, heat flux density sensors, a weather station and energy counters. The analysis of the results shows agreement with previous studies of PCM addition; therefore, the acquisition system is suitable for this application.

  12. Economic Crisis and SMEs’ Behavior: An Analysis on the Furniture Sector in Italy

    Directory of Open Access Journals (Sweden)

    Marco Cioppi

    2014-09-01

    Full Text Available This paper examines the results of a case study analysis carried out on five small and medium-sized enterprises (SMEs operating in the furnishing sector of an Italian province. The aim of the study was to analyze which kind of strategies SMEs are adopting in order to face the economic crisis started in 2008. The cases analyzed highlighted the ability of firms in reacting by the development a proactive strategy, which brought them to positive economic results over time. Discussion of results and managerial implications are suggested in order to properly address other enterprises acting in similar market condition

  13. The Relationship between Profit and Productivity in the IT Sector in Romania. Analysis by Panel Method

    Directory of Open Access Journals (Sweden)

    Raluca Andreea POPA

    2014-11-01

    Full Text Available Within the context of process of globalization and economic integration, the objective of economic politics of every country is strengthening of national competitiveness. To stay competitive in global markets, countries are forced to search for factors, new alternatives stimulating economic development. Productivity is among quantities reflecting the level of competitiveness. This paper has three parts. The first part consists of introduction and literature review. In the second part is found analyzing the relationship of dependence between net income and labor productivity and the last part is an analysis of the IT services sector.

  14. Cost analysis of Healthcare in a Private sector Neonatal Intensive Care Unit in India.

    Science.gov (United States)

    Karambelkar, Geeta; Malwade, Sudhir; Karambelkar, Rajendra

    2016-09-08

    To study the actual cost of care per patient in private-sector level IIIa Neonatal Intensive Care Unit (NICU). Prospective cost-analysis study. Cost incurred by the family on the treatment of baby, separately for every newborn for entire length of hospitalization, was calculated. 126 newborns were enrolled; High level of intervention was needed for 25.4% babies. The mean cost of care was US $ 90.7 per patient per day. Bulk of the cost of care was the hospital bill.

  15. Comparative Analysis of Market Volatility in Indian Banking and IT Sectors by using Average Decline Model

    Directory of Open Access Journals (Sweden)

    Kirti AREKAR

    2017-12-01

    Full Text Available The stock market volatility is depends on three major features, complete volatility, volatility fluctuations, and volatility attention and they are calculate by the statistical techniques. Comparative analysis of market volatility for two major index i.e. banking & IT sector in Bombay stock exchange (BSE by using average decline model. The average degeneration process in volatility has being used after very high and low stock returns. The results of this study explain significant decline in volatility fluctuations, attention, and level between epochs of pre and post particularly high stock returns.

  16. Sector model analysis of risk on cross-jurisdictional treatment of disaster waste related to the Great East Japan Earthquake

    International Nuclear Information System (INIS)

    Nagashima, Miori; Itokawa, Etsuko; Ozuka, Yohei

    2012-01-01

    This study addressed the controversial issue of disaster waste treatment in the reconstruction efforts following the Great East Japan Earthquake. Using the Sector Model (Matsumoto 2009), we categorized a range of actions taken in relation to the cross-jurisdictional treatment into the four sectors, government, industry, academia, and private. The analysis through this Sector Model made it possible to map the entire layout of waste treatment, inclusive of less-visible industry and academia sectors. Accordingly, we have argued that differences of risk awareness are not necessarily due to sector differences but rather depend on two aspects of the disaster waste treatment; the safety levels and the nationwide treatment of waste in Japan. We further suggest that the discrepancy in the arguments on safety levels emerged as a result of scientific under-determination and cross-jurisdictional treatment from social and/or political under-determination. (author)

  17. Nationwide Analysis of U.S. Commercial Building Solar Photovoltaic (PV) Breakeven Conditions

    Energy Technology Data Exchange (ETDEWEB)

    Davidson, Carolyn [National Renewable Energy Lab. (NREL), Golden, CO (United States); Gagnon, Pieter [National Renewable Energy Lab. (NREL), Golden, CO (United States); Denholm, Paul [National Renewable Energy Lab. (NREL), Golden, CO (United States); Margolis, Robert [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-10-01

    The commercial sector offers strong potential for solar photovoltaics (PV) owing to abundant available roof space suitable for PV and the opportunity to offset the sector's substantial retail electricity purchases. This report evaluated the breakeven price of PV for 15 different building types and various financing options by calculating electricity savings based on detailed rate structures for most U.S. utility territories (representing approximately two thirds of U.S. commercial customers). We find that at current capital costs, an estimated 1/3 of U.S. commercial customers break even in the cash scenario and approximately 2/3 break even in the loan scenario. Variation in retail rates is a stronger driver of breakeven prices than is variation in building load or solar generation profiles. At the building level, variation in the average breakeven price is largely driven by the ability for a PV system to reduce demand charges.

  18. Construction Sector (NAICS 23)

    Science.gov (United States)

    Find environmental regulatory information for the construction sector, including the construction of buildings or engineering projects. This includes RCRA information for hazardous waste, refrigeration compliance, asbestos, effluent guidelines & lead laws

  19. Seismic response analysis of an instrumented building structure

    Science.gov (United States)

    Li, H.-J.; Zhu, S.-Y.; Celebi, M.

    2003-01-01

    The Sheraton - Universal hotel, an instrumented building lying in North Hollywood, USA is selected for case study in this paper. The finite element method is used to produce a linear time - invariant structural model, and the SAP2000 program is employed for the time history analysis of the instrumented structure under the base excitation of strong motions recorded in the basement during the Northridge, California earthquake of 17 January 1994. The calculated structural responses are compared with the recorded data in both time domain and frequency domain, and the effects of structural parameters evaluation and indeterminate factors are discussed. Some features of structural response, such as the reason why the peak responses of acceleration in the ninth floor are larger than those in the sixteenth floor, are also explained.

  20. Integrated water assessment and modelling: A bibliometric analysis of trends in the water resource sector

    Science.gov (United States)

    Zare, Fateme; Elsawah, Sondoss; Iwanaga, Takuya; Jakeman, Anthony J.; Pierce, Suzanne A.

    2017-09-01

    There are substantial challenges facing humanity in the water and related sectors and purposeful integration of the disciplines, connected sectors and interest groups is now perceived as essential to address them. This article describes and uses bibliometric analysis techniques to provide quantitative insights into the general landscape of Integrated Water Resource Assessment and Modelling (IWAM) research over the last 45 years. Keywords, terms in titles, abstracts and the full texts are used to distinguish the 13,239 IWAM articles in journals and other non-grey literature. We identify the major journals publishing IWAM research, influential authors through citation counts, as well as the distribution and strength of source countries. Fruitfully, we find that the growth in numbers of such publications has continued to accelerate, and attention to both the biophysical and socioeconomic aspects has also been growing. On the other hand, our analysis strongly indicates that the former continue to dominate, partly by embracing integration with other biophysical sectors related to water - environment, groundwater, ecology, climate change and agriculture. In the social sciences the integration is occurring predominantly through economics, with the others, including law, policy and stakeholder participation, much diminished in comparison. We find there has been increasing attention to management and decision support systems, but a much weaker focus on uncertainty, a pervasive concern whose criticalities must be identified and managed for improving decision making. It would seem that interdisciplinary science still has a long way to go before crucial integration with the non-economic social sciences and uncertainty considerations are achieved more routinely.

  1. Development and Analysis of New Integrated Energy Systems for Sustainable Buildings

    Science.gov (United States)

    Khalid, Farrukh

    Excessive consumption of fossil fuels in the residential sector and their associated negative environmental impacts bring a significant challenge to engineers within research and industrial communities throughout the world to develop more environmentally benign methods of meeting energy needs of residential sector in particular. This thesis addresses potential solutions for the issue of fossils fuel consumption in residential buildings. Three novel renewable energy based multigeneration systems are proposed for different types of residential buildings, and a comprehensive assessment of energetic and exergetic performances is given on the basis of total occupancy, energy load, and climate conditions. System 1 is a multigeneration system based on two renewable energy sources. It uses biomass and solar resources. The outputs of System 1 are electricity, space heating, cooling, and hot water. The energy and exergy efficiencies of System 1 are 91.0% and 34.9%, respectively. The results of the optimisation analysis show that the net present cost of System 1 is 2,700,496 and that the levelised cost of electricity is 0.117/kWh. System 2 is a multigeneration system, integrating three renewable energy based subsystems; wind turbine, concentrated solar collector, and Organic Rankine Cycle supplied by a ground source heat exchanger. The outputs of the System 2 are electricity, hot water, heating and cooling. The optimisation analysis shows that net present cost is 35,502 and levelised cost of electricity is 0.186/kWh. The energy and exergy efficiencies of System 2 are found to be 34.6% and 16.2%, respectively. System 3 is a multigeneration system, comprising two renewable energy subsystems-- geothermal and solar to supply power, cooling, heating, and hot water. The optimisation analysis shows that the net present cost of System 3 is 598,474, and levelised cost of electricity of 0.111/kWh. The energy and exergy efficiencies of System 3 are 20.2% and 19.2%, respectively, with

  2. Organizational Culture in the Financial Sector: Evidence from a Cross-Industry Analysis of Employee Personal Values and Career

    OpenAIRE

    van Hoorn, Andre

    2015-01-01

    We assess the organizational culture in the finance industry in relation to the global financial crisis (GFC) and consider the potential of cultural change to improve the financial sector. To avoid (response) biases, we build on the person-organization (P-O) fit literature and develop a novel, indirect method for assessing organizational culture that revolves around relationships between employees’ personal traits and their career success in the industry or organization under study. We analyz...

  3. Energy efficiency in the industrial sector. Model based analysis of the efficient use of energy in the EU-27 with focus on the industrial sector

    International Nuclear Information System (INIS)

    Kuder, Ralf

    2014-01-01

    of the industry could be split up into energy intensive subsectors where single production processes dominate the energy consumption, and non-energy intensive subsectors. Ways to reduce the energy consumption in the industrial sector are the use of alternative or improved production or cross cutting technologies and the use of energy saving measures to reduce the demand for useable energy. Based on the analysis within this study, 21 % of the current energy consumption of the industrial sector of the EU and 17 % in Germany could be reduced. Based on the extended understanding of energy efficiency, the model based scenario analysis of the European energy system with the further developed energy system model TIMES PanEU shows that the efficient use of energy at an emission reduction level of 75 % is a slightly increasing primary energy consumption. The primary energy consumption is characterised by a diversified energy carrier and technology mix. Renewable energy sources, nuclear energy and CCS play a key role in the long term. In addition the electricity demand in combination with a strong decarbonisation of the electricity generation is increasing constantly. In the industrial sector the emission reduction is driven by the extended use of electricity, CCS and renewables as well as by the use of improved or alternative process and supply technologies with lower specific energy consumption. Thereby the final energy consumption stays almost on a constant level with increasing importance of electricity and biomass. Both regulatory interventions in the electricity sector and energy saving targets on the primary energy demand lead to higher energy system costs and therewith to a decrease of efficiency based on the extended understanding. The energy demand is reduced stronger than it is efficient and the saving targets lead to the extended use of other resources resulting in totally higher costs. The integrated system analysis in this study points out the interactions

  4. Complex analysis of energy efficiency in operated high-rise residential building: Case study

    Directory of Open Access Journals (Sweden)

    Korniyenko Sergey

    2018-01-01

    Full Text Available Energy conservation and human thermal comfort enhancement in buildings is a topical issue of modern architecture and construction. The innovative solution of this problem makes it possible to enhance building ecological and maintenance safety, to reduce hydrocarbon fuel consumption, and to improve life standard of people. The requirements to increase of energy efficiency in buildings should be provided at all the stages of building's life cycle that is at the stage of design, construction and maintenance of buildings. The research purpose is complex analysis of energy efficiency in operated high-rise residential building. Many actions for building energy efficiency are realized according to the project; mainly it is the effective building envelope and engineering systems. Based on results of measurements the energy indicators of the building during annual period have been calculated. The main reason of increase in heat losses consists in the raised infiltration of external air in the building through a building envelope owing to the increased air permeability of windows and balcony doors (construction defects. Thermorenovation of the building based on ventilating and infiltration heat losses reduction through a building envelope allows reducing annual energy consumption. Energy efficiency assessment based on the total annual energy consumption of building, including energy indices for heating and a ventilation, hot water supply and electricity supply, in comparison with heating is more complete. The account of various components in building energy balance completely corresponds to modern direction of researches on energy conservation and thermal comfort enhancement in buildings.

  5. Complex analysis of energy efficiency in operated high-rise residential building: Case study

    Science.gov (United States)

    Korniyenko, Sergey

    2018-03-01

    Energy conservation and human thermal comfort enhancement in buildings is a topical issue of modern architecture and construction. The innovative solution of this problem makes it possible to enhance building ecological and maintenance safety, to reduce hydrocarbon fuel consumption, and to improve life standard of people. The requirements to increase of energy efficiency in buildings should be provided at all the stages of building's life cycle that is at the stage of design, construction and maintenance of buildings. The research purpose is complex analysis of energy efficiency in operated high-rise residential building. Many actions for building energy efficiency are realized according to the project; mainly it is the effective building envelope and engineering systems. Based on results of measurements the energy indicators of the building during annual period have been calculated. The main reason of increase in heat losses consists in the raised infiltration of external air in the building through a building envelope owing to the increased air permeability of windows and balcony doors (construction defects). Thermorenovation of the building based on ventilating and infiltration heat losses reduction through a building envelope allows reducing annual energy consumption. Energy efficiency assessment based on the total annual energy consumption of building, including energy indices for heating and a ventilation, hot water supply and electricity supply, in comparison with heating is more complete. The account of various components in building energy balance completely corresponds to modern direction of researches on energy conservation and thermal comfort enhancement in buildings.

  6. Building-integrated PV -- Analysis and US market potential

    International Nuclear Information System (INIS)

    Frantzis, L.; Hill, S.; Teagan, P.; Friedman, D.

    1994-01-01

    Arthur D Little, Inc., in conjunction with Solar Design Associates, conducted a study for the US Department of Energy (DOE), Office of Building Technologies (OBT) to determine the market potential for building-integrated photovoltaics (BIPV). This study defines BIPV as two types of applications: (1) where the PV modules are an integral part of the building, often serving as the exterior weathering skin, and (2) the PV modules are mounted on the existing building exterior. Both of these systems are fully integrated with the energy usage of the building and have potential for significant market penetration in the US

  7. Priority economic sector and household income in Indonesia (an analysis of input output)

    Science.gov (United States)

    Subanti, S.; Mulyanto; Hakim, A. R.; Mafruhah, I.; Hakim, I. M.

    2018-03-01

    This purpose of study aims to identify the roles of priority economic sectors on household incomes in Indonesia. Analyse in this paper used nine economic sectors, that representing result of classification from input output table. This study found that (1) priority economic sector are manufacturing sector & trade hotel and restaurant; (2) sector that have looking forward orientation included agriculture, mining & quarrying, and financial ownership & business services; and (3) electricity, gas, and water supply sector give the biggest impact to household income in Indonesia. The suggestion that policies aimed at increasing productivity and raising skills while encouraging individual participation in the formal labour market are essential.

  8. Dominating clasp of the financial sector revealed by partial correlation analysis of the stock market.

    Science.gov (United States)

    Kenett, Dror Y; Tumminello, Michele; Madi, Asaf; Gur-Gershgoren, Gitit; Mantegna, Rosario N; Ben-Jacob, Eshel

    2010-12-20

    What are the dominant stocks which drive the correlations present among stocks traded in a stock market? Can a correlation analysis provide an answer to this question? In the past, correlation based networks have been proposed as a tool to uncover the underlying backbone of the market. Correlation based networks represent the stocks and their relationships, which are then investigated using different network theory methodologies. Here we introduce a new concept to tackle the above question--the partial correlation network. Partial correlation is a measure of how the correlation between two variables, e.g., stock returns, is affected by a third variable. By using it we define a proxy of stock influence, which is then used to construct partial correlation networks. The empirical part of this study is performed on a specific financial system, namely the set of 300 highly capitalized stocks traded at the New York Stock Exchange, in the time period 2001-2003. By constructing the partial correlation network, unlike the case of standard correlation based networks, we find that stocks belonging to the financial sector and, in particular, to the investment services sub-sector, are the most influential stocks affecting the correlation profile of the system. Using a moving window analysis, we find that the strong influence of the financial stocks is conserved across time for the investigated trading period. Our findings shed a new light on the underlying mechanisms and driving forces controlling the correlation profile observed in a financial market.

  9. Analysis of the quality of work life in the sewing sector of a clothing industry

    Directory of Open Access Journals (Sweden)

    Danielly Silva de Aquino

    2012-08-01

    Full Text Available The objective of this research was to analyze the quality of work life in the sewing sector of a clothing industry located in the Northwest of the Paraná. The research is characterized as an exploratory and descriptive case study. The instrument of data collection was an adaptation of the model considered for Walton. For data analysis descriptive statistics and the diagram of boxes were used (boxplot. The results had disclosed that the eight criterions of the quality of work life investigated had presented levels of satisfaction greater than 50%. A satisfactory general average can be evidenced (66.85% among the employees of the sewing sector in relation to the quality of work life. Although the presented levels of satisfaction, it would be interesting to take some measures aiming to improve them even more. These measures should be directed to the analysis of the criterion “proper and fair compensation”, which presented the worst average and greater dispersion among investigated criteria.

  10. A blocked takeover in the Polish power sector: A model-based analysis

    International Nuclear Information System (INIS)

    Kamiński, Jacek

    2014-01-01

    As the President of the Office of Competition and Consumer Protection refused to approve a government initiated takeover in the Polish power sector and the Court of Competition and Consumer Protection did not make a ruling on that case, the takeover was finally prohibited. In this context, the main aim of this paper is to carry out a quantitative analysis of the impact of the takeover in question on electricity prices and quantities, consumer and producer surpluses, dead weight loss and emissions. The scope of the study covers the Polish power generation sector and the analysis was carried out for 2009. A game theory-based electricity market equilibrium model developed for Poland was applied. The model includes several country-specific conditions, such as a coal-based power generation fuel-mix, a large share of biomass co-combustion, etc. For the sake of clarity, only four scenarios are assumed. The paper concludes that the declared synergy savings did not compensate for the increase in dead weight loss and the transfer of surplus from consumers to producers caused by increased market power. - Highlights: • A takeover blocked by the President of the Office of Competition and Consumer Protection was analysed. • A game theory-based model of the Polish wholesale electricity market was applied. • The impact of the takeover on electricity prices and generation levels, surplus transfers and dead weight loss was estimated. • The results were compared with the declared synergy savings

  11. 2015 wind energy observatory. Analysis of market, jobs and future of the wind energy sector in France

    International Nuclear Information System (INIS)

    Perot, Olivier; Autier, Emmanuel

    2015-11-01

    This Power Point presentation proposes graphs, figures, tables and comments on the status and evolution of jobs in the wind energy sector (a growing sector, analysis of job locations), of the wind energy market (assessment of a growing market, dynamic French regions, competitive context, evolution of technologies with higher machines, larger wind farms and a growing production), and on the future of wind energy (a growing number of training courses, an active R and D all over the country, a structuring sector). Sheets presenting actors per categories, and maps of regional activity location are provided in appendix

  12. Oil prices, stock markets and portfolio investment. Evidence from sector analysis in Europe over the last decade

    International Nuclear Information System (INIS)

    Hedi Arouri, Mohamed El; Khuong Nguyen, Duc

    2010-01-01

    This article extends the understanding of oil-stock market relationships over the last turbulent decade. Unlike previous empirical investigations, which have largely focused on broad-based market indices (national and/or regional indices), we examine short-term linkages in the aggregate as well as sector by sector levels in Europe using different econometric techniques. Our main findings suggest that the reactions of stock returns to oil price changes differ greatly depending on the activity sector. In the out-of-sample analysis we show that introducing oil asset into a diversified portfolio of stocks allows to significantly improve its risk-return characteristics. (author)

  13. An Urban-Spatial Analysis of the Women in the Informal Sectors of Greater Guwahati City of Assam, India

    Directory of Open Access Journals (Sweden)

    Zona Bhuyan

    2013-05-01

    Full Text Available This article reflects the use of urban space by women in urban informal sectors in the city of Guwahati located in North East India. The population influx from across the borders in the aftermath of the partition has huge implications both on polity and on economy of the northeastern states in general and Assam in particular.  Importantly, the urban informal sectors have a sizeable share in terms of its significant contributions towards Gross Domestic Product (GDP as well as generation of employment opportunities largely. Using a feminist perspective, the research is an attempt to investigate the engagement of women in the informal sector in greater Guwahati. Research findings reveal that the occupations of the women workers are location-specific, that is, the manufacturing sectors (textiles, food preparation, printing and skilled service are mainly home/shop based production (fixed locations whereas the service sectors (leisure, caring, elementary construction, elementary sales and cleaning occupation operate at variable locations (construction sites, street pavements, marketplaces and other various locations. Further analysis shows that the informal sector is highly demand dependent and such demands are in the central business areas of the city, therefore informal sector services (skilled services and elementary services are found to be located in and around the central areas of Guwahati city. Women operators in the informal sector are attracted to the central business district because of the many advantages that it enjoys relative to other parts of a city. The paper concludes by calling on policy makers and physical planning agencies to evolve more pragmatic strategies for urban development matters in order that urban informal sector activities can be integrated into urban development plans. Finally, further research is called for on how urban planners could redesign the urban space with appropriate consideration of the informal sector

  14. Logistic Regression Analysis of Operational Errors and Routine Operations Using Sector Characteristics

    National Research Council Canada - National Science Library

    Pfleiderer, Elaine M; Scroggins, Cheryl L; Manning, Carol A

    2009-01-01

    Two separate logistic regression analyses were conducted for low- and high-altitude sectors to determine whether a set of dynamic sector characteristics variables could reliably discriminate between operational error (OE...

  15. ANALYSIS OF THE DEVELOPMENT DIRECTIONS OF THE BANKING SECTOR THROUGH THE MANAGEMENT OF IT PROJECTS

    Directory of Open Access Journals (Sweden)

    Віктор Володимирович МОРОЗОВ

    2017-03-01

    Full Text Available In this article, the causes and consequences of IT projects’ budgets reformatting in banking organizations are investigated. Analysis and parallels in approaches of choosing IT projects to be implemented in foreign and Ukrainian financial institutions are being conducted. This significantly affects not only the results of investigation and selection of IT projects but also on the development of such organizations in general. The analysis shows that on the background of global GDP decrease, banks around the world are increasing their IT investments, but investments in IT projects are heavily redistributed towards digital transformation. Nevertheless, IT projects are a major driver of banking business development, so their number is rapidly growing every day in the fields of big data analytics, virtualization and cloud computing, mobility, scoring, target marketing, IT infrastructure etc. The authors draw conclusions about trends in implementation of IT projects and their impact on the development of the banking business sector.

  16. Policy Analysis of Poverty Alleviation in Semarang City Using Spatial and Sectoral Approach

    Science.gov (United States)

    Muktiali, M.

    2018-02-01

    Poverty is a multidimensional problem. Therefore, poverty reduction policy is not only related to the increase of income, but also various other dimensions such as improvement of education, health, quality of life, access to electricity, access to sanitation and water supply. Semarang City Government in 2012 initiated a policy of poverty reduction synergy program called “Gerdu Kempling”. Gerdu Kempling is an integrated policy which gives priority to addressing poverty in each village and sub-district in Semarang based on aspects of health, economy, education, infrastructure, and environment. Based on the results of Budget Allocation Analysis and Analysis of Geographic Information Systems (Poverty Mapping), it can be concluded that the program and budget allocation for poverty alleviation in Semarang City are not synchronized either spatially or sectorally.

  17. Ergonomic work analysis: A case study of bus drivers in the private collective transportation sector.

    Science.gov (United States)

    Araújo, Adolfo Vicente; Arcanjo, Gemima Santos; Fernandes, Haroldo; Arcanjo, Georgia Santos

    2018-05-03

    The collective transportation system is essential to reduce the number of automobiles in the roads. Concerns exist related to quality, comfort and safety of bus driver's workstations. The objective of this study was to improve the driver's workstation in the private collective transportation sector by analyzing ergonomic practices using the Ergonomic Work Analysis (EWA). The EWA was chosen because it seeks to evaluate the labor condition as it relates to the psychophysiological conditions of workers, it complies with regulatory standard 17 (NR17). To identify driver concerns, interviews and questionnaires were administered. The workstation and worker routines were observed. The analysis revealed that the largest number of complaints related to noise, display light and location of the passenger identifier device. Drivers reported discomfort in the knees and lower back. Recommendations were made to improve the workstation and change the routine to minimize the discomfort and ergonomic risk factors.

  18. Analysis for Building Envelopes and Mechanical Systems Using 2012 CBECS Data

    Energy Technology Data Exchange (ETDEWEB)

    Winiarski, David W.; Halverson, Mark A.; Butzbaugh, Joshua B.; Cooke, Alan L.; Bandyopadhyay, Gopal K.; Elliott, Douglas B.

    2018-03-14

    This report describes the aggregation and mapping of certain building characteristics data available in the most recent Commercial Building Energy Consumption Survey (CBECS) (DOE EIA 2012) to describe most typical building construction practices. This report provides summary data for potential use in the support of modifications to the Pacific Northwest National Laboratory’s commercial building prototypes used for building energy code analysis. Specifically, this report outlines findings and most typical design choices for certain building envelope and heating, ventilating, and air-conditioning (HVAC) system choices.

  19. Funding and financing mechanisms for infrastructure delivery: multi-sector analysis of benchmarking of South Africa against developed countries

    CSIR Research Space (South Africa)

    Matji, MP

    2015-05-01

    Full Text Available -1 AMPEAK Asset Management Conference 2015 Funding and financing mechanisms for infrastructure delivery: multi-sector analysis of benchmarking of South Africa against developed countries Matji, MP and Ruiters, C Abstract: For developing..., the researcher identifies financing opportunities for infrastructure delivery in South Africa and how such opportunities can be explored, taking into account political dynamics and legislative sector-based frameworks. Keywords: Asset Management, Financing...

  20. Analysis Income Business Food and Beverage Informal Sector in Kecamatan Tampan City Pekanbaru

    OpenAIRE

    Sari, Novi Ulya; Khaswarina, Shorea; Muwardi, Didi

    2014-01-01

    A development is an effort to gain the more and the better life. There are 4 indicators in gaining the development they are economic change, human resources, social inhibition and the high of life needed. A development in the development country likes Indonesia, generally more consider the development of economic sector in the hope of much progressed in production of job vacancy.There are two kinds of economic activities, they are from formal sector and informal one. Formal sector is a sector...

  1. Safety analysis report for the Neutron Multiplier Facility, 329 Building

    International Nuclear Information System (INIS)

    Rieck, H.G.

    1978-09-01

    Neutron multiplication is a process wherein the flux of a neutron source such as 252 Cf is enhanced by fission reactions that occur in a subcritical assemblage of fissile material. The multiplication factor of the device depends upon the consequences of neutron reactions with matter and is independent of the initial number of neutrons present. Safe utilization of such a device demands that the fissile material assemblage be maintained in a subcritical state throughout all normal and credibly abnormal conditions. Examples of things that can alter the multiplication factor (and degree of subcriticality) are temperature fluctuations, changes in moderator material such as voiding or composition, addition of fissile materials, and change in assembly configuration. The Neutron Multiplier Facility (NMF) utilizes a multiplier- 252 Cf assembly to produce neutrons for activation analysis of organic and inorganic environmental samples and for on-line mass spectrometry analysis of fission products which diffuse from a stationary fissile target (less than or equal to 4 g fissile material) located in the Neutron Multiplier. The NMF annex to the 329 Building provides close proximity to related counting equipment, and delay between sample irradiation and counting is minimized

  2. Vulnerability analysis in a pwr nuclear power plant containment building

    OpenAIRE

    Musolas Otaño, Antoni Maria

    2013-01-01

    When supervising a nuclear power plant, the containment building is crucial. Its functions are guaranteeing structural integrity and avoiding leaks in case of accident. Both events are considered of high risk. Once a given overpressure is registered inside the containment building, three possible outputs are considered: serviceability, breakdown, and collapse. The aim is the study of vulnerability. The vulnerability of the containment building under an overpressure is described by the conditi...

  3. Detecting failure events in buildings: a numerical and experimental analysis

    OpenAIRE

    Heckman, V. M.; Kohler, M. D.; Heaton, T. H.

    2010-01-01

    A numerical method is used to investigate an approach for detecting the brittle fracture of welds associated with beam -column connections in instrumented buildings in real time through the use of time-reversed Green’s functions and wave propagation reciprocity. The approach makes use of a prerecorded catalog of Green’s functions for an instrumented building to detect failure events in the building during a later seismic event by screening continuous data for the presence of wavef...

  4. Cost analysis of LEED certified United States navy buildings

    OpenAIRE

    Kirar, Carl V.

    2011-01-01

    CIVINS (Civilian Institutions) Thesis document A study was completed at UW-Madison in 2010 that reviewed the energy consumption of US Navy buildings which earned Leadership in Energy and Environmental Design (LEED) certification by the United States Green Building Council (USGBC). The research compared LEED certified buildings to a commercial counterpart within the US Navy inventory against Executive Order (EO) 13423. The EO mandated that all federal agencies meet a 30 percent reduction of...

  5. Sectoral analysis of the causal relationship between electricity consumption and real output in Pakistan

    International Nuclear Information System (INIS)

    Tang, Chor Foon; Shahbaz, Muhammad

    2013-01-01

    This study uses the annual data from 1972 to 2010 to assess the causal relationship between electricity consumption and real output at the aggregate and sectoral levels in Pakistan. This study covers three main economic sectors in Pakistan namely agricultural, manufacturing and services sectors. Our cointegration results reveal that the variables are cointegrated at the aggregate and sectoral levels. At the aggregate level, we find that there is uni-directional Granger causality running from electricity consumption to real output in Pakistan. At the sectoral level, we find that electricity consumption Granger-causes real output in the manufacturing and services sectors. However, there is no causal relationship between electricity consumption and real output in the agricultural sector. The policy implication of these results is that electricity conservation policies in general would deteriorate the process of economic growth as well as the real output in the manufacturing and services sectors in Pakistan. Nevertheless, we suggest the Pakistani government to implement the electricity conservation policies merely to the agricultural sector because such policies may have less or no adverse impact on its real output. - Highlights: • We assess the electricity-growth nexus in Pakistan at the aggregate and sectoral levels. • The variables are cointegrated at both levels. • We find causality from electricity to output at the aggregate level and services. • We find neutral causality in the agricultural sector. • We find bi-directional causality in the manufacturing sector

  6. A Study on the Development of Building Energy Analysis Program and the Establishment of BEPS

    Energy Technology Data Exchange (ETDEWEB)

    Kong, S.R.; Kwon, K.J.; Yoo, Y.H.; Cho, Y.K.; Kijm, Y.D.; Han, S.W. [Korea Electric Power Corp. (KEPCO), Taejon (Korea, Republic of). Research Center; Kim, M.H.; Kim, K.W.; Cho, K.H.; Lee, H.W.; Lee, Y.H.; Kim, S.J.; Song, K.S.; Heon, C.T.; Choi, J.M.; Kim, Y.I.; Suk, H.T.; Kang, J.S.; Kim, Y.D.; Kang, K.T.; Lee, J.E.; Kwark, H.S. [Seoul National Univ. (Korea, Republic of)

    1994-12-31

    The amount of energy consumption in building covers the 30% of the total energy consumption and that of electricity is much the same. Because of the improvement of the living quality, energy consumption in building part is increasing and the rate is much higher than that of other parts. So, KEPCO, one of the major domestic energy suppliers and consumers, needs to develop reliable computerized building energy analysis program and to establish building energy performance standards for the reasonable energy management and the efficient execution of energy budget and the improvement of working condition of the corp`s buildings. So the study aims to the development of computerized building energy analysis program, and the establishment energy budget level and building energy performance standards for the corp`s buildings.

  7. Analysis of Potential Benefits and Costs of Adopting a Commercial Building Energy Standard in South Dakota

    Energy Technology Data Exchange (ETDEWEB)

    Belzer, David B.; Cort, Katherine A.; Winiarski, David W.; Richman, Eric E.

    2005-03-04

    The state of South Dakota is considering adopting a commercial building energy standard. This report evaluates the potential costs and benefits to South Dakota residents from requiring compliance with the most recent edition of the ANSI/ASHRAE/IESNA 90.1-2001 Energy Standard for Buildings except Low-Rise Residential Buildings. These standards were developed in an effort to set minimum requirements for the energy efficient design and construction of new commercial buildings. The quantitative benefits and costs of adopting a commercial building energy code are modeled by comparing the characteristics of assumed current building practices with the most recent edition of the ASHRAE Standard, 90.1-2001. Both qualitative and quantitative benefits and costs are assessed in this analysis. Energy and economic impacts are estimated using results from a detailed building simulation tool (Building Loads Analysis and System Thermodynamics [BLAST] model) combined with a Life-Cycle Cost (LCC) approach to assess corresponding economic costs and benefits.

  8. Perspectives of energy efficient technologies penetration in the Greek domestic sector, through the analysis of Energy Performance Certificates

    International Nuclear Information System (INIS)

    Gelegenis, J.; Diakoulaki, D.; Lampropoulou, H.; Giannakidis, G.; Samarakou, M.; Plytas, N.

    2014-01-01

    The building sector in Greece presents a huge energy saving potential, the largest part of which is remaining unexploited. The recently enacted legislation for the energy performance of buildings, in combination with the financial support provided by funding programmes to low income families is expected to significantly boost the deployment of energy efficient technologies in the Greek domestic sector. The exploitation of these legal and financial instruments follows a formalised process of energy audits, resulting in buildings classification and in the submission of Energy Performance Certificates (EPCs) including suggestions to improve the dwellings' energy performance. The paper aims at an ex-ante evaluation of the market trends revealed by EPCs in Greece, in order to identify the perspectives of individual technologies and to assess the degree to which the certification procedure helps in improving the energy performance of buildings. The results indicate a strong trend towards less cost-effective technologies, revealing a sub-optimal allocation of financial resources and putting into risk the path towards the achievement of EU targets for 2020. - Highlights: • Energy Performance Certificates reveal market trends of energy efficient technologies. • SWH, replacement of windows and walls/roof insulation are most often recommended. • Other measures are controls, switch to NG; low cost measures are rarely recommended. • Cost-effectiveness is not the main factor explaining technology recommendations. • Amendment of EPC document and inspection process may enhance its effectiveness

  9. Analysis the Impact of Technology Spillovers on Total Factor Productivity of Agricultural Sector in Iran

    Directory of Open Access Journals (Sweden)

    Mostafa Baniasadi

    2016-09-01

    Group of Eight developed countries (D8 plus China. Technology spillover indexes are thus decomposed into two components: Imports of capital goods and foreign direct investment (FDI. Index of capital goods imports measures imports of capital goods from major commercial partners of Iran (D8 countries and china. Foreign direct investment (FDI represents the share of foreign capital in agricultural sectors. Therefore, the empirical analysis of the technology spillover on the productivity of agricultural sectors is based on theatrical framework and ARDL model. Results and Discussion: According to the results of the ARDL model, technological spillover effect on the TFP of agricultural sector, in long-term shows that technology spillover has a positive and significant effect on agricultural productivity from both channels of capital goods import and foreign direct investment (FDI. But in short-term spillover variable from a capital goods import channel is not significant. This indicates that absorption of the technology from imports of capital goods channel do not perform very well and probably low-tech and without affecting on TFP of agriculture sector is imported. But in long-term technology spillover from imports channels also had a positive impact on total factor productivity of the agricultural sector. In fact, high technologies in long-term can be absorbed through the imports and influenced on TFP. According to thesis study results, the estimated coefficient of error correction term is equal to 0.53.This means that in each period, 53 percent of imbalances of agricultural TFP will be resolved. The average speed of upward of adjustment reflects the fact that in Iran economy, deviations and imbalances have arisen in the agricultural sector TFP caused by technology spillovers shocks, move very fast towards long-run equilibrium. Conclusions: The purpose of this paper is to advance the knowledge for a key question with evident implications for economic policy: What is the

  10. Better Building Alliance, Plug and Process Loads in Commercial Buildings: Capacity and Power Requirement Analysis (Brochure)

    Energy Technology Data Exchange (ETDEWEB)

    2014-09-01

    This brochure addresses gaps in actionable knowledge that can help reduce the plug load capacities designed into buildings. Prospective building occupants and real estate brokers lack accurate references for plug and process load (PPL) capacity requirements, so they often request 5-10 W/ft2 in their lease agreements. This brochure should be used to make these decisions so systems can operate more energy efficiently; upfront capital costs will also decrease. This information can also be used to drive changes in negotiations about PPL energy demands. It should enable brokers and tenants to agree about lower PPL capacities. Owner-occupied buildings will also benefit. Overestimating PPL capacity leads designers to oversize electrical infrastructure and cooling systems.

  11. Sector-based political analysis of energy transition: Green shift in the forest policy regime in France

    International Nuclear Information System (INIS)

    Sergent, Arnaud

    2014-01-01

    This article examines energy transition political process from a sector-based approach, through the analysis of recent shift in the French forest policy regime. We demonstrate that, since 2007, energy transition policies have led to a harvesting turn within the French forest policy framework, meaning that priority is given to wood mobilisation, mainly for biomass uses. In addition, our findings suggest that the political authority wielded by the state over forest policy has shifted from forest administrative services to energy agencies and local authorities. Finally, we show that, although implementation of the harvesting turn is a cause of sectoral and inter-sectoral tensions, energy transition challenge also contributes to a process of (re)institutionalisation of mediation relationships among forestry stakeholders and wood-based industries representatives. The article concludes by arguing that sectors should retain relevant institutional frameworks for actors when choosing political arrangements required for implementing energy transition policy. - Highlights: • Implementing energy transition policy potentially challenges sector-based politics. • We propose a policy regime framework and socio-political investigations. • We analyse the political impact of energy transition policy on French forest sector. • Shifts occur in sectoral policy framework, authority, and mediation relationships

  12. Analysis of equatorial plasma bubble zonal drift velocities in the Pacific sector by imaging techniques

    Directory of Open Access Journals (Sweden)

    D. Yao

    2007-03-01

    Full Text Available Using 1024 nights of data from 2002–2005 taken by the Cornell Narrow Field Imager (CNFI, we examine equatorial plasma bubble (EPB zonal drift velocity characteristics. CNFI is located at the Maui Space Surveillance Site on the Haleakala Volcano (geographic: 20.71° N, 203.83° E; geomagnetic: 21.03° N, 271.84° E on the island of Maui, Hawaii. The imager is set up to view in a magnetic field-aligned geometry in order to maximize its resolution. We calculate the zonal drift velocities using two methods: a correlation routine and an EPB west-wall intensity gradient tracking routine. These two methods yield sizeable differences in the evenings, suggesting strong pre-local midnight EPB development. An analysis of the drift velocities is also performed based on the three influencing factors of season, geomagnetic activity, and solar activity. In general, our data match published trends and drift characteristics from past studies. However, we find that the drift magnitudes are much lower than results from other imagers at similar latitude sectors but at different longitude sectors, suggesting that zonal drift velocities have a longitudinal dependence.

  13. Comparative analysis of sustainable consumption and production in Visegrad region - conclusions for textile and clothing sector

    Science.gov (United States)

    Koszewska, M.; Militki, J.; Mizsey, P.; Benda-Prokeinova, R.

    2017-10-01

    Gradual environmental degradation, shrinking of non-renewable resources, and lower quality of life are directly or indirectly arising from snowballing consumption. These unfavorable processes concern increasingly textile and clothing sector and are increasingly being felt in Visegrad Region (V4). The objective of the article was to access current consumption patterns in V4 countries, identify the factors that influence those patterns and finally to draw the conclusions for more sustainable consumption and production models as well as to make a comparative analysis of the results across V4 countries. A consumer survey was conducted to examine V4 citizens’ attitudes and behaviors in the context of sustainable consumption. To ensure sample size and comparability across countries 2000 randomly-selected V4 citizens, aged 18 and over, were interviewed. To analyze the supply side of the market and legal framework, the desk research was used. The results allowed to give some guidelines for the joint V4 strategy for solving ecological and social problems of V4 countries as well as the conclusions for textile and clothing sector.

  14. Low-carbon building assessment and multi-scale input-output analysis

    Science.gov (United States)

    Chen, G. Q.; Chen, H.; Chen, Z. M.; Zhang, Bo; Shao, L.; Guo, S.; Zhou, S. Y.; Jiang, M. M.

    2011-01-01

    Presented as a low-carbon building evaluation framework in this paper are detailed carbon emission account procedures for the life cycle of buildings in terms of nine stages as building construction, fitment, outdoor facility construction, transportation, operation, waste treatment, property management, demolition, and disposal for buildings, supported by integrated carbon intensity databases based on multi-scale input-output analysis, essential for low-carbon planning, procurement and supply chain design, and logistics management.

  15. A multi-sectoral decomposition analysis of city-level greenhouse gas emissions: Case study of Tianjin, China

    International Nuclear Information System (INIS)

    Kang, Jidong; Zhao, Tao; Liu, Nan; Zhang, Xin; Xu, Xianshuo; Lin, Tao

    2014-01-01

    To better understand how city-level greenhouse gas (GHG) emissions have evolved, we performed a multi-sectoral decomposition analysis to disentangle the GHG emissions in Tianjin from 2001 to 2009. Five sectors were considered, including the agricultural, industrial, transportation, commercial and other sectors. An industrial sub-sector decomposition analysis was further performed in the six high-emission industrial branches. The results show that, for all five sectors in Tianjin, economic growth was the most important factor driving the increase in emissions, while energy efficiency improvements were primarily responsible for the decrease in emissions. In comparison, the influences from energy mix shift and emission coefficient changes were relatively marginal. The disaggregated decomposition in the industry further revealed that energy efficiency improvement has been widely achieved in the industrial branches, which was especially true for the Smelting and Pressing of Ferrous Metals and Chemical Raw Materials and Chemical Products sub-sectors. However, the energy efficiency declined in a few branches, e.g., Petroleum Processing and Coking Products. Moreover, the increased emissions related to industrial structure shift were primarily due to the expansion of Smelting and Pressing of Ferrous Metals; its share in the total industry output increased from 5.62% to 16.1% during the examined period. - Highlights: • We perform the LMDI analysis on the emissions in five sectors of Tianjin. • Economic growth was the most important factor for the emissions increase. • Energy efficiency improvements mainly contributed to the emission decrease. • Negative energy intensity effect was observed in most of the industrial sub-sectors. • Industrial structure change largely resulted in emission increase

  16. An analysis of the role of information and communication technology sectors on Japanese national economy from 1995 through 2005: An application of multiplier analysis

    International Nuclear Information System (INIS)

    Zuhdi, Ubaidillah

    2015-01-01

    The purpose of this study is to continue the previous studies which focused on Japanese Information and Communication Technology (ICT) sectors. More specifically, this study aims to analyze the role of ICT sectors on Japanese national economy using simple household income multiplier, one of the analysis instruments in Input-Output (IO) analysis. The analysis period of this study is from 1995-2005. The results show that the sectors did not have an important role on the national economy of Japan on the period. Besides, the results also show that, from the point of view of the multiplier, Japanese national economy tended to stable during the period

  17. Complete analysis of a nuclear building to nuclear safety standards

    Energy Technology Data Exchange (ETDEWEB)

    Jaeger, T A

    1975-01-01

    The nuclear standards impose on the designer the necessity of examining the loads, stresses, and strains in a nuclear building even under extreme loading conditions, both due to plant malfunctions and environmental accidents. It is necessary then to generate, combine, and examine a tremendous amount of data; really the lack of symmetry and general complication of the structures and the large number of loading combinations make an automatic analysis quite necessary. A largely automated procedure is presented in view of solving the problem by a series of computer programs linked together. After the seismic analysis has been performed by (SADE CODE) these data together with the data coming from thermal specifications, weight, accident descriptions etc. are fed into a finite element computer code (SAP4) for analysis. They are processed and combined by a computer code (COMBIN) according to the loading conditions (the usual list in Italy is given and briefly discussed), so that for each point (or each selected zone) under each loading condition the applied loads are listed. These data are fed to another computer code (DTP), which determines the amount of reinforcing bars necessary to accommodate the most severe of the loading conditions. The Aci 318/71 and Italian regulation procedures are followed; the characteristics of the program are briefly described and discussed. Some particular problems are discussed, e.g. the thermal stresses due to normal and accident conditions, the inelastic behavior of some frame elements (due to concrete cracking) is considered by means of an 'ad hoc' code. Typical examples are presented and the results are discussed showing a relatively large benefit in considering this inelastic effect.

  18. Building Energy Consumption Pattern Analysis of Detached Housing for the Policy Decision Simulator

    Science.gov (United States)

    Lim, Jiyoun; Lee, Seung-Eon

    2018-03-01

    The Korean government announced its plan to raise the previous reduction goal of greenhouse gas emission from buildings by 26.9% until 2020 on July 2015. Therefore, policies regarding efficiency in the building energy are implemented fast, but the level of building owners and market understanding is low in general, and the government service system which supports decision making for implementing low-energy buildings has not been provided yet. The purpose of this study is to present the design direction for establishing user customized building energy database to perform a role to provide autonomous ecosystem of low-energy buildings. In order to reduce energy consumption in buildings, it is necessary to carry out the energy performance analysis based on the characteristics of target building. By analysing about 20-thousand cases of the amount of housing energy consumption in Korea, this study suggested the real energy consumption pattern by building types. Also, the energy performance of a building could be determined by energy consumption, but previous building energy consumption analysis programs required expert knowledge and experience in program usage, so it was difficult for normal building users to use such programs. Therefore, a measure to provide proper default using the level of data which general users with no expert knowledge regarding building energy could enter easily was suggested in this study.

  19. Comparative Study and Critical Analysis of Sustainability Reporting in the Oil and Gas Sector

    OpenAIRE

    Thomas, Prakash M.

    2006-01-01

    Oil and Gas sector is one of the largest and major economic sectors globally. It is also one of the most critical in terms of being a basic driver for all other economic activities worldwide. In the recent times we have seen large scale volatility in Oil and Gas prices and a surge in huge profits for Oil and Gas sector companies. Oil and Gas sector is also one of the major sectors with tremendous impact on not just environmental factors but also on Social and Economic factors. All major Oil a...

  20. Expanding the Notion of Historical Text through Historic Building Analysis

    Science.gov (United States)

    Baron, Christine; Dobbs, Christina

    2015-01-01

    Among the disciplinary skills necessary for understanding in the social studies classroom is the ability to determine context and build meaning from past events. Historical buildings are an important component of historical study, and they serve as a type of nontraditional text that students can decode and use to construct meaning about multiple…