WorldWideScience

Sample records for buildings einsatz transparenter

  1. Transparent thermal insulation for prefabricated school buildings; Einsatz transparenter Waermedaemmung an Schulgebaeuden in praefabrizierter Bauweise

    Energy Technology Data Exchange (ETDEWEB)

    Russ, C. [Fraunhofer-Institut fuer Solare Energiesysteme (ISE), Freiburg im Breisgau (Germany). Gruppe Solares Bauen; Buchmann, R. [Leipzigprojekt GmbH, Leipzig (Germany); Duesterhoeft, A. [Holz- und Leichtmetallbau GmbH, Leipzig (Germany)

    1997-12-31

    The existing schools in the new federal states built from prefabricated elements need to be modernized in order to reduce their energy demand. Fitting some 300 square metres of transparent thermal insulation to the south side of a house front may lead to a cut in its thermal energy demand by 74 per cent. This energy consumption is by 12 kWh per square metre lower than the one obtained with opaque thermal insulation. The results of the first demonstration project are described. (MSK) [Deutsch] Die in den neuen Bundeslaendern vorhandenen Schulen in vorgefertigter Bauweise sind energetisch sanierungsbeduerftig. Werden im Rahmen einer Sanierung ca. 300qm transparente Waermedaemmung an der suedorientierten Fassade eingesetzt, so kann der Heizwaermebedarf um 74% herabgesetzt werden. Das sind 12 kWh/qm weniger als bei dem vergleichsweisen Einsatz einer opaken Waermedaemmung. Im Folgenden werden die Ergebnisse des ersten Demonstrationsprojekts beschrieben.

  2. Transparent thermal insulation - new developments in the field of building technology?; Transparente Waermedaemmung - neue Trends in der Gebaeudetechnik?

    Energy Technology Data Exchange (ETDEWEB)

    Bieler, P.

    1995-12-31

    In chapter 10 of the anthology about building control transparent thermal insulation is described as a possible new trend in the field of building technology. An answer is given to the question to which extent facades can be applied as technical building equipment. Furthermore the passive use of solar energy is discussed and the measuring results of a test cell building are presented. (BWI) [Deutsch] Kapitel 10 des Sammelbandes ueber Building Control stellt die transparente Waermedaemmung als moeglichen neuen Trend der Gebaeudetechnik vor. In diesem Zusammenhang wird die Frage aufgeworfen, inwieweit Fassaden als Technische Gebaeudeausruestung eingesetzt und angesehen werden koennen. Ferner werden die passive Solarenergienutzungen angesprochen und Messergebnisse eines Testzellengebaeudes vorgestellt. (BWI)

  3. Efficient use of energy in buildings - New optical coatings for transparent building elements; Rationelle Energienutzung in Gebaeuden. Neue optische Beschichtungen fuer transparente Gebaeudeteile im Hinblick auf einen verbesserten sommerlichen Waermeschutz - Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Oelhafen, P.; Mack, I.; Reber, G.; Romanyuk, A.; Steiner, R.

    2008-07-01

    This final report for the Swiss Federal Office of Energy (SFOE) reports on optical coatings for transparent building elements with respect to improving protection against overheating in summer. Newly developed multi-layer coating systems using standard materials and methods are reported on. With these multi-layer coatings, the solar radiation is said to be reduced by between 17% and 29% compared to commercially available sun-protection windows. The report reviews the new materials being looked at and describes the measurement methods used and the results obtained. The optical characteristics of the coatings are discussed in detail and the results of measurements made are presented in detail. Also, the effect of varying angles of incidence is discussed.

  4. Sistemas transparentes para gobiernos electrónicos eficientes

    Directory of Open Access Journals (Sweden)

    Andrade Castro, Jesús Alberto

    2007-05-01

    Full Text Available Este trabajo hace una reflexión crítica del papel que desempeñan los sistemas transparentes en el gobiernoelectrónico. La misión de los sistemas transparentes computarizados es desarrollar aplicaciones confiables y robustas,con el propósito de sustituir la fiscalización y los controles jurídicos y contables del comportamiento administrativo,por verdaderas evaluaciones que incluyan la participación del ciudadano, en el ejercicio transparente de la accióngubernamental. Teniendo como base la necesidad de tener aplicaciones para gobierno electrónico, el Laboratorio deInvestigación de Tecnologías y Sistemas de Información (LITSI de la Facultad de Ciencias de la Universidad del Zuliadesarrolla aplicaciones de minería de texto, para obtener datos que están envueltos en el metalenguaje de etiquetas(HTML contenido en las páginas WEB. Con el prototipo que hemos desarrollado, se ha hecho un intento por convertirinformación desde documentos tipos texto no estructurados que están en la WEB, en información factible de ser analizaday contrastada con las acciones y políticas públicas. Se pretende así, desarrollar sistemas transparentes eficientescon aplicaciones computarizadas que permitan al ciudadano ejercer el control social de la gestión gubernamental.

  5. Monitoring 'renewables'. Use of renewable raw materials in house building. Fourth progress report; Monitoring 'Nachwachsender Rohstoffe'. Einsatz nachwachsender Rohstoffe im Wohnungsbau. Vierter Sachstandsbericht

    Energy Technology Data Exchange (ETDEWEB)

    Roesch, C.

    1999-07-01

    Erecting or acquiring a house or residential unit is one of the most lasting and incisive investments that a man makes in his lifetime. It is, so to speak, the realization of one's dream of independence and security in old age. Appropriately high are expectations on the construction, design, and materials used. Technically fabricated building materials meet these demands: They stand out by high functionality and effectivenesss, ease of handling and long-term stability as well as a long service-life and low prices. As a result, the formerly wide use of natural raw materials in construction has suffered a great setback. The generally positive basic attitude towards modern products has changed somewhat in recent years, however. Today's builders or redevelopers expect not only precise cost information but also information on energy, ecological aspects and health aspects. In contrast to the formerly often one-sided orientation to the investment phase, it is more and more the complete lifecycle of the building that is taken into account. In this way builders react to topical demands for safeguarding sustainable development also in the building sector. (orig.) [German] Die Errichtung bzw. der Erwerb von Haeusern und Wohnungen ist eine der langfristigsten und einschneidensten Investitionen, die der Mensch in seinem Leben taetig. Es ist gleichermassen die Erfuellung des Traumes von der Unabhaengigkeit und Absicherung fuer das Lebensalter. Dementsprechend hohe Erwartungen werden an die Bauweise, die Konstruktionen und eingesetzten Materialien gestellt. Technisch hergestellte Baustoffe erfuellen diese Erwartungen: Sie zeichnen sich durch eine hohe Funktionalitaet und Leistungsfaehigkeit, eine gute Handhabbarkeit und Dauerbestaendigkeit sowie eine lange Lebensdauer und niedrige Preise aus. Dies fuehrte dazu, dass der im Wohnungsbau frueher sehr verbreitete Einsatz natuerlicher Rohstoffe stark zurueckgedraengt wurde. Die allgemeine positive Grundeinstellung gegenueber

  6. An electricity bill of zero Euros. Energy-autonomous high-tech building; Stromrechnung Null Euro. Energieautarkes Wohnen: Hightech im Einsatz

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2008-12-15

    Energy autonomy means comfortable living without being connected to the public electricity grid. In a joint project of TU Darmstadt university and Bosch Thermotechnik, an autonomous model building was constructed. However, for a wider application of this know-how new technologies will be required. (orig.)

  7. Use of error-detection and diagnosis methods in existing buildings - Final report; Einsatz von Fehlerdetektions- und Diagnosemethoden in realen Gebaeuden (IEA Annex 34) - Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Gruber, P.

    2000-10-15

    This report for the Swiss Federal Office of Energy (SFOE) discusses the results of tests made with two expert systems used for error-detection and diagnosis in existing buildings. These expert systems were developed within the framework of the International Energy Agency's (IEA) Annex 25 Project entitled 'Real Time Simulation of Heating, Ventilation and Air-conditioning (HVAC) Systems for Building Optimisation, Fault Detection and Diagnosis'. The aim of using these tools was to help detect planning, installation and commissioning errors. These cannot only affect system performance but also can cause increased energy consumption and a reduction of the working life of the system's components. The tests of the tools took place within the framework of the IEA's Annex 34 'Computer-aided Evaluation of HVAC System Performance: the Practical Application of Fault Detection and Diagnosis Techniques in Real Buildings'. Experience gained with the two tools is presented and discussed. The quality of the results and the use of the systems in practice are discussed and commented on. They strongly differ from one tool to the other.

  8. Systeme im Einsatz. Lernmanagement, Kompetenzmanagement und PLE

    NARCIS (Netherlands)

    Kalz, Marco; Schön, Sandra; Lindner, Martin; Roth, Detlev; Baumgartner, Peter

    2011-01-01

    Kalz, M., Schön, S., Lindner, M., Roth, D., & Baumgartner, P. (2011). Systeme im Einsatz. Lernmanagement, Kompetenzmanagement und PLE. In M. Ebner, & S. Schön (Eds.), L3T - Lerhbuch für Lernen und Lehren mit Technologie (pp. 111-118). Graz, Austria: Uni Graz. Available at

  9. Evolución conceptual de los protocolos de puentes transparentes

    OpenAIRE

    Ibáñez Fernández, Guillermo Agustín; García-Martínez, Alberto; Carral Pelayo, Juan Antonio; Arco Rodríguez, José Manuel; Azcorra, Arturo

    2009-01-01

    Los puentes Ethernet transparentes son un elemento cada vez más importante en las redes de telecomunicaciones. Este artículo ofrece una visión panorámica de la evolución conceptual de los paradigmas de puentes durante las últimas décadas, desde los puentes transparentes con árbol de expansión hasta las propuestas actualmente en estandarización: por una parte Shortest Path Bridges, Provider Bridges y Provider Backbone Bridges en el IEEE 802.1; por otra parte Routing Bridges en el ...

  10. Transparent thermal insulation systems in industrial buildings. Rational energy use and low-energy buildings. Measured variables (g value, k value, long-term measurements), influence of building design and weather on the function of thermal insulation systems, behaviour in fire, exemplary applications (industrial buildings, school buildings, indoor swimming pools, etc.); Transparente Waermedaemmung im Industriebau. Rationelle Energieverwendung und Niedrigenergie-Gebaeude. Messdaten (g-Wert, k-Wert, Langzeitbeobachtung), Einfluss von Bauweise und Witterung auf die Funktion der TWD, Brandverhalten. Anwendungsbeispiele (Gewerbliche Bauten, Industriehallen, Schulen, Schwimmbaeder, etc.)

    Energy Technology Data Exchange (ETDEWEB)

    Bucher, W. [DLR Deutsches Zentrum fuer Luft- und Raumfahrt e.V., Koeln (Germany); Bertram, H.G. [eds.] [Forschungszentrum Juelich GmbH (DE). Projekttraeger Biologie, Energie, Oekologie (BEO)

    1998-07-01

    The increasing concern about an early depletion of available energy resources have led to world-wide considerations about possible energy conservation. Based on this aspect it seemed to be interesting to evaluate the possibilities and limits for the use of transparent thermal insulation in the field of industrial construction at a workshop and to question them in a detailed discussion. The workshop was held at the ''Crew Trainings Center'' (CTC) at the DLR in Cologne, which is an example of a successful application of transparent thermal insulation. The validity of different criteria for individual decisions in terms of construction and the necessity to consider advantages and disadvantages can be explained with this example. Furthermore a proof is given that a successful architectural design can very well be accomplished taking into account the facts in terms of construction physics. (orig.) [German] Zunehmende Besorgnis gegenueber einer vorzeitigen Erschoepfung der verfuegbaren Energieressourcen fuehrt weltweit zu Ueberlegungen hinsichtlich moeglicher Energieeinsparung. Unter diesem Aspekt schien es attraktiv, Moeglichkeiten und Grenzen fuer den Einsatz der Transparenten Waermedaemmung (TWD) im Industriebau im Rahmen eines Workshops auszuloten und in einer eingehenden Diskussion zu hinterfragen. Den aeusseren Rahmen fuer diese Veranstaltung gab das 'Crew Trainings Center' (CTC) beim DLR in Koeln ab, ein fruehes Beispiel einer gelungenen Anwendung der TWD. Die Gueltigkeit unterschiedlicher Kriterien fuer einzelne bauliche Entscheidungen und die Notwendigkeit einer Abwaegung von Vor- und Nachteilen lassen sich an diesem Einzelfall exemplarisch verdeutlichen. Darueber hinaus aber wird hier ein Beleg dafuer geboten, dass ein architektonisch gelungener Wurf die Beruecksichtigung bauphysikalischer Gegebenheiten keineswegs ausschliesst. (orig.)

  11. System engineering for energy management in buildings. Report on the hospital of psychiatry, neurology and rehabilitation at Heiligenhafen; Gebaeude-Systemtechnik fuer Energiemanagement. Einsatz in der Fachklinik fuer Psychiatrie, Neurologie und Rehabilitation in Heiligenhafen

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1994-12-31

    Electrical installations of the conventional type so far have offered the possibility to switch, control, monitor, signal, etc. In modern buildings, however, more and more functions are in demand, resulting in an increasing number of conventional functional grids installed in parallel. Therefore, an installation concept was needed which, instead of a one-by-one approach, permits rather to interlink different functions, responds quickly, and can be easily extended. System engineering for buildings can do all that. (orig.) [Deutsch] Bisher war es mit konventioneller Installationstechnik moeglich, zu schalten, zu steuern, zu ueberwachen, zu signalisieren usw. In modernen Gebaeuden werden jedoch immer mehr Funktionen benoetigt, die auf konventioneller Basis zu immer mehr nebeneinander installierten Funktionsnetzen fuehren. Gefordert ist also eine Technik, die Inselloesungen vermeidet und stattdessen Verknuepfungen unterschiedlicher Funktionen ermoeglicht, die flexibel ist und bei Erweiterungen eine problemlose Ergaenzung zulaesst. Das alles kann die Gebaeude-Systemtechnik. (orig.)

  12. Arquitectura en territorios informados y transparentes Una wiki en la escuela de arquitectura

    Directory of Open Access Journals (Sweden)

    Javier Fernández García

    2010-01-01

    Full Text Available El marco general de nuestra investigación en la universidad son los espacios de convivencia, información y formación que configuran los habitantes en un territorio online. La Web 2.0 nos ha dotado de nuevas herramientas con la que construir espacios. Desde la fundación en agosto de 2006 de CityWiki, indagamos en la arquitectura de estos lugares que se articulan en un espacio común en el que, a falta de jerarquía y policía, la acción en él la define el empoderamiento y la libertad del ciudadano responsable. A modo de laboratorio, desde entonces, embarcamos la actividad investigadora y docente en la actitud 2.0 incluida en la WWW. En la primera parte de este artículo se expone el pensamiento actualizado que empíricamente evoluciona emparejado a la actualidad de nuestras investigaciones. El objetivo es hacer entender el territorio wiki como informado y transparente llamado a añadir capas de información a la realidad para de esta forma no sustituirla sino ampliarla. Seguidamente, en la segunda parte, se describe y analiza la experiencia de innovación llevada a cabo durante el curso 2007/2008 en la que se ensayó un modelo docente instrumentados en los modos y paisajes previamente descritos.

  13. Einsatz von Skype im Unternehmen: Chancen und Risiken

    OpenAIRE

    Messerer, Thomas

    2016-01-01

    Gegenstand dieser Studie ist der Internet-Telefoniedienst Skype, der sich grundsätzlich an Endanwender richtet. Im Mittelpunkt steht dabei die Frage, ob und unter welchen Umständen sich dieses Skype-Angebot auch für den Einsatz in Unternehmen eignet. Microsoft bietet darüber hinaus eine Skype-Lösung (ehemals Lync) an, die sich ausdrücklich an Unternehmen wendet. Deren Markenname ist „Skype for Business“. Dieser Dienst wird in der vorliegenden Studie nicht untersucht; dazu hat das Autorenteam ...

  14. Avaliação do filme transparente de poliuretano em queimaduras e áreas doadoras de pele

    Directory of Open Access Journals (Sweden)

    Maria José da Silva

    1990-12-01

    Full Text Available Foram avaliadas pelas autoras a aplicação clínica e técnica de utilização do curativo transparente de poliuretano, num total de cinquenta e cinco pacientes: trinta e três com queimaduras de segundo grau superficiais e vinte e dois submetidos a enxertia de pele. O tempo de permanência dos filmes variou de um a quatorze dias nos dois grupos de pacientes. A utilização do curativo transparente de poliuretano, nestes casos, demonstrou ser uma excelente alternativa, atendendo às necessidades dos pacientes e da equipe médica no que se refere a: ausência de dor, facilidade de aplicação e manuseio, permanência do filme até a completa epitelização dos ferimentos, proteção contra a contaminação, além de proporcionar menor tempo gasto pelo pessoal de enfermagem e redução de custo.

  15. Der Einsatz von Online-Datenbanken für Objektinnovationen im Systemgeschäft

    OpenAIRE

    Noch, Rainer

    1990-01-01

    Der Einsatz von Online-Datenbanken für Objektinnovationen im Systemgeschäft. - Augsburg : FGM-Verl., 1990. - 62, LVII S. - Zugl.: Augsburg, Univ., Diplomarb. - (Arbeitspapiere zur Schriftenreihe Schwerpunkt Marketing ; 31)

  16. Building

    OpenAIRE

    Seavy, Ryan

    2014-01-01

    Building for concrete is temporary. The building of wood and steel stands against the concrete to give form and then gives way, leaving a trace of its existence behind. Concrete is not a building material. One does not build with concrete. One builds for concrete. MARCH

  17. Einsatz von E-Portfolios bei der Qualifizierung pädagogischer Professionals in restriktiven Settings

    Directory of Open Access Journals (Sweden)

    Dirk Jahn

    2010-05-01

    Full Text Available Der Beitrag zeigt den Einsatz von E-Portfolios bei der Qualifizierung pädagogischer Professionals in der beruflichen Bildung auf. Dabei werden als Referenz die Theorie der Selbstreflexion, des kritischen Denkens sowie des Konzeptwandels zugrunde gelegt. Es werden Möglichkeiten aufgezeigt, wie E-Portfolios auch in restriktiven Settings eingesetzt werden können. Bislang dominiert in der Literatur der Einsatz von E-Portfolios in der Schule bzw. in der Bildung von Lehrkräften. Restriktive Settings sind Settings, die für das formale Lernen nur kurze Zeiträume eröffnen, mit heterogenen Zielgruppen verbunden sind und die zum Teil ungünstige motivationale und kognitive Ausgangsvoraussetzungen mitbringen. Die dargestellten Ergebnisse fussen auf der Entwicklung, Erprobung und Erforschung eines solchen Settings, nämlich der Erprobung eines Qualifizierungskonzepts für pädagogische Professionals im Einzelhandel.

  18. Soft Power und Militär : eine Untersuchung zum Afghanistan-Einsatz der Bundeswehr

    OpenAIRE

    Kersten, Jan

    2013-01-01

    Soft Power ist zu einem einflussreichen Konzept avanciert – in der Politikwissenschaft, aber auch in der Politik selbst. Dabei bleibt es sowohl theoretisch als auch praktisch umstritten. In der Praxis wird das Konzept instrumentalisiert, um außenpolitisches Handeln von militärischem und wirtschaftlichem Druck positiv abzugrenzen. Unklar ist, wie Soft Power in militärischen Kontexten, in denen Hard Power im Vordergrund steht, funktionieren kann. Anhand des Afghanistan-Einsatzes der Bundeswehr ...

  19. Refrigeration compressor for the mobile application; Kaeltemittelverdichter fuer den mobilen Einsatz

    Energy Technology Data Exchange (ETDEWEB)

    Hagenlocher, T. [Bock GmbH und Co. Kaeltemaschinenfabrik, Frickenhausen (Germany)

    2000-06-01

    The mobile use of cooling air conditioning systems is increasingly important. Main component of this system is the refrigeration compressor. The special requirement for the compressor as well for the resulting boundary conditions are discussed. (orig.) [German] Der mobile Einsatz von Kaelte- und Klimaanlagen gewinnt zunehmend an Bedeutung. Wichtigste Komponente dieser Anlage ist der Kaeltemittelverdichter. Die speziellen Anforderungen an den Verdichter sowie an die daraus resultierenden Randbedingungen werden dargestellt. (orig.)

  20. Handlungsmuster von Lehrerinnen und Lehrern beim Einsatz neuer Medien. Grundlagen eines Projekts zur empirischen Unterrichtsforschung

    Directory of Open Access Journals (Sweden)

    Sigrid Blömeke

    2017-08-01

    Full Text Available Ziel des vorzustellenden Projekts ist es in einem ersten Schritt, Handlungsmuster von Lehrpersonen beim Einsatz von neuen Medien im Unterricht der Fächer Deutsch, Mathematik und Informatik der Sekundarstufe II zu identifizieren. Zu diesem Zweck werden Videoaufnahmen von 30 Unterrichtsstunden im Hinblick auf zugrunde liegende ‚Unterrichtsscripts’ (i.e. didaktische Routinen analysiert und die subjektiven Theorien der Lehrkräfte zum Lehren und Lernen erhoben. Bei der Zusammensetzung der Stichprobe findet neben der Variation der Fachzugehörigkeit der Expertisegrad der Lehrpersonen bezogen auf den Einsatz neuer Medien Berücksichtigung, und zwar in zwei Abstufungen (hoch – niedrig. Auf diese Weise wird ermöglicht, in einem zweiten Schritt begründet Hypothesen zu Zusammenhängen zwischen Handlungsmustern sowie Fach und Expertise als Kontextfaktoren zu generieren und mögliche Geltungsbereiche zu beschreiben. Über diese Grundlagenforschung hinausgehend sollen in einem dritten Schritt anhand der gewonnenen Erkenntnisse Interventionen entwickelt werden, die eine Weiterentwicklung von Lehrerhandeln beim Einsatz neuer Medien im Unterricht ermöglichen. Hier stellt sich allerdings die Frage, wie sich Handeln grundsätzlich verändern lässt.

  1. Der Einsatz von E-Portfolios in der Berufsausbildung - Konzeption und Potenziale

    Directory of Open Access Journals (Sweden)

    Uwe Elsholz

    2010-02-01

    Full Text Available In der beruflichen Bildung sind (E-Portfolios zur Reflexion des Gelernten – anders als etwa an Hochschulen oder in allgemeinbildenden Schulen – in Theorie und Praxis gegenwärtig kaum existent. Konzepte und Studien zum Einsatz von E-Portfolios in der Berufsausbildung und der Weiterbildung fehlen weitgehend, so dass die Potenziale von Portfolioarbeit für eine selbstbewusstere und selbstbestimmtere Gestaltung beruflichen Lernens bisher ungenutzt bleiben. Hier setzt dieser Beitrag an. Es wird ein Konzept vorgestellt, wie der Einsatz eines E-Portfolios die Berufsausbildung im dualen System unterstützen kann. Anhand des dargestellten Beispiels werden Möglichkeiten und Grenzen des Einsatzes von E-Portfolios in der beruflichen Bildung aufgezeigt. Die Umsetzung des E-Portfolios findet im Rahmen des berufswissenschaftlich begründeten E- Learning-Konzepts der Kompetenzwerkst@tt statt (vgl. Howe/Knutzen 2007. Die Kompetenzwerkst@tt ist ein softwaregestütztes Ausbildungskonzept, das sich an realen beruflichen Arbeitsprozessen und Ansätzen des Situierten Lernens orientiert. Im Mittelpunkt des E-Portfolios als Teil der Kompetenzwerkst@tt steht die lernortübergreifende Dokumentation und Reflexion der Ausbildungsinhalte der Dualen Berufsausbildung. Im Beitrag wird gezeigt, wie die konzeptionellen Überlegungen zur Portfolioarbeit in der beruflichen Bildung vom Portfolio-Diskurs in anderen Bildungsbereichen beeinflusst sind, sich aber in der Umsetzung und in den konkreten Zielsetzungen deutlich unterscheiden. Es werden darüber hinaus weitere Möglichkeiten und Optionen von Portfolioarbeit in der beruflichen Bildung aufgezeigt.

  2. Erfahrbares Programmieren durch den zielgerichten Einsatz von Flugdrohnen im Informatikunterricht

    Directory of Open Access Journals (Sweden)

    Raphael Zender

    2015-11-01

    Full Text Available Today, teaching on fundamental programming skills is one of the essential IT-related topics in schools. This trend is brought forward by simple development environments like Scratch. Those abstract from detailed programming concepts in terms of graphical building blocks. Exotic runtime platforms like robots further increase the attractiveness. The solution “ScratchDrone” provides quadrocopters as an innovative new platform to run Scratch programs. The modular system architecture of ScratchDrone allows children to program on multiple layers of abstraction depending on their individual learning progress. The combination of a multi-layer didactical model, the movement in 3D space, as well as the natural human fascination for flying results in a high learning motivation for young programmers.

  3. Einsatz eines "Audience Response Systems" in der Hochschullehre - Fragekategorien, didaktische Strukturierungen und Praxisreflexionen zur Partizipation im Hörsaal

    Directory of Open Access Journals (Sweden)

    Ahmet Camuka

    2014-06-01

    Full Text Available Im Hörsaal viele Studierende aktivieren? Hierfür kommt ein elektronisches Feedbacksystem auf der Grundlage von "Bring your own device" (BYOD zum Einsatz. Der Beitrag stellt Partizipationsformen anhand exemplarischer Fragekategorien vor und diskutiert diese aufgrund von Aussagen aus einer evaluativen Gruppendiskussion.

  4. Interacción institucional, participación democrática y transparencia. La iniciativa del Voto Transparente en el Ecuador (2013 - 2014

    Directory of Open Access Journals (Sweden)

    Daniel Barredo Ibáñez

    2014-12-01

    Full Text Available Internet, como una prolongación del espacio público contemporáneo, permite la habilitación de instrumentos que profundizan el sentido de la democracia. Los ciudadanos, mediante el aprovechamiento de las TIC, tienden a transformarse paulatinamente de los sujetos pasivos de las democracias representativas, en los sujetos activos que ejercen sus derechos políticos en el paradigma de la democracia participativa. En el siguiente artículo presentamos un análisis de Voto Transparente, una plataforma que estrenó en 2013 el Consejo Nacional Electoral del Ecuador con el fin de al involucrar a la ciudadanía en el control social y en la evaluación de las tareas de los legisladores. Mediante la observación de los posibles incumplimientos de los elegidos, del cotejo de las promesas electorales con su posterior cumplimiento, los electores ecuatorianos pueden contrarrestar la escasa participación democrática que ha habido históricamente en esta república andina.

  5. Light and energy - solar cells in transparent facades. Final report; Lys og energi - solceller i transparente facader. Slutrapport

    Energy Technology Data Exchange (ETDEWEB)

    2008-07-01

    The overall purpose with the project 'LIGHT AND ENERGY - solar cells in transparent facades' is to demonstrate and disseminate the potentials for the application of light-filtering solar cells as multi-functional components, which meets the architectural objectives while contributing to a good indoor climate, a suitable quality of lighting indoor and at the same time produces electricity. The project was divided into six activities. The first activity 'zooms in' on the light-filtering solar cells on the market today. The following activities gradually 'zoom out' from the solar cell itself to the building component and ends up in the facade and the room behind. This order - which largely reflects the chronological development of the project - is repeated in the final project report to ensure the best possible overview. The characterisation in the different activities has been a combination of technical measurements, simulations, calculations and a thorough architectural evaluation of solar cell component, facade and room for attain an overall, interprofessional evaluation of the solar cell panels. It is important to stress that the basis of the project is the solar cell products available on the market today and In the near future. The possibilities and ideas have been evaluated and documented using mock-ups in 1:1 scale since the individual components have completely other qualities when they are integrated in a facade - the platform of this project. These models in full scale are a possibility to register and experience the character of the light inside out and under different light settings. It has been important to think of the solar cell filter as a part of the architecture instead of a replacement for windows and actively use the light-filtering features as a possibility in new facade designs - a filter which in combination with the completely transparent glass and completely light-blocking materials opens up for new possibilities

  6. Influência do ângulo de incidência nos ganhos de calor solar através de materiais transparentes

    Directory of Open Access Journals (Sweden)

    Joaquim Pizzutti dos Santos

    Full Text Available Este trabalho apresenta uma equação genérica que relaciona a variação do Fator Solar com o ângulo de incidência. As curvas resultantes desta variação, para vidros e outros materiais transparentes, foram obtidas a partir de experimentos de espectrofotometria para reflexão e transmissão, realizados para diferentes ângulos de incidência. Desta forma, foram identificados grupos de materiais com comportamento semelhante de variação do Fator Solar em função do ângulo. Para cada um dos grupos foi definido um material de referência, com valores de Fator Solar representando o comportamento médio do grupo. Para estes materiais foram obtidas equações gerais da curva de variação do Fator Solar, que permite calcular o ganho de calor solar total considerando a variação do ângulo de incidência da radiação ao longo de um período de tempo. O valor desses ganhos para qualquer material do mesmo grupo pode ser obtido aplicando um coeficiente de correção, que é o valor do Fator Solar para a incidência normal do material considerado. Os valores para esse coeficiente são propostos neste trabalho para um grande número de materiais ou podem ser obtidos a partir de catálogos.

  7. Development of energy-efficient comfortable ventilation systems with air quality guided volume flow control and continuous monitoring of the window opening status. Part 1. Use of the LuQaS triple sensor for air quality guided volume flow control of mechanical ventilation systems in domestic buildings. Research project; Entwicklung energieeffizienter Komfortlueftungsanlagen mit luftqualitaetsgefuehrter Volumenstromregelung und kontinuierlicher Erfassung des Fensteroeffnungszustandes. Teilbericht 1. Einsatz des LuQaS-Triple-Sensors zur luftqualitaetsgefuehrten Volumenstromregelung von mechanischen Lueftungsanlagen in Wohngebaeuden. Forschungsprojekt

    Energy Technology Data Exchange (ETDEWEB)

    Grossklos, Marc; Ebel, Witta; Knissel, Jens

    2011-05-15

    The report presents the preparatory work on the research project of the above title. The first chapter presents a status report on air quality monitoring inside rooms and evaluates the projects so far in which the LuQaS air quality sensor was used. The second chapter is a documentation of preliminary measurements using the LuQaS sensor in two passive residential buildings and several individual measurements for sensor calibration. It was found that in apartments with mechanical ventilation, the sensor reflects the user activities; further, the measured values indicate signal changes also in the off-air of the building, so that control via central sensors in the ventilation and off-air systems appears feasible. The third chapter discusses control strategies for air quality control. Apart from a discussion of control unit types, operating regimes, methods to determine rated values, and additional control functions, the effects of threshold value control with different threshold limit values and volume flow changes on the air quality of a model building was simulated. The results prove the expectation that the air quality inside a building will be influenced positively by air quality control. Theoretical investigations of the DrD method will be presented in another part-report of the project.

  8. Sucralfate for the treatment of radiation induced mucositis; Einsatz von Sucralfat in der Radioonkologie

    Energy Technology Data Exchange (ETDEWEB)

    Belka, C. [Univ. Tuebingen (Germany). Abt. fuer Strahlentherapie; Hoffmann, W. [Univ. Tuebingen (Germany). Abt. fuer Strahlentherapie; Paulsen, F. [Univ. Tuebingen (Germany). Abt. fuer Strahlentherapie; Bamberg, M. [Univ. Tuebingen (Germany). Abt. fuer Strahlentherapie

    1997-05-01

    Analgetika, Antibiotika, Antimykotika, Antidiarrhoika und antiinflammatorisch wirksame Substanzen zum Einsatz. Zunehmend werden aber auch Substanzen angewendet, deren Wirkungsmechanismus eine direkte Modulation der Mukositispathogenese erwarten laesst. Sucralfat, ein basischer Polyaluminiumhydroxid-Sucrose-Komplex, wird neuerdings zur Prophylaxe und Therapie der radiogenen Mukositis vorgeschlagen. Sucralfat bildet eine zaeh haftende Schutzschicht auf Epitheldefekten, verbessert die lokale Verfuegbarkeit von Wundheilungsfaktoren und foerdert die Bildung von schleimhautprotektiven Prostaglandinen. Patienten und Methode: Die Ergebnisse der verfuegbaren Studien, die sich mit dem Einsatz von Sucralfat als Schleimhautprotektivum befassen, werden analysiert und diskutiert. Ergebnisse: Bislang sind zahlreiche Studien durchgefuehrt worden, die eine signifikante Verbesserung der klinischen Symptomatik und der morphologischen Befunde radiogener Schleimhautreaktionen, insbesondere bei Bestrahlungen im Beckenbereich, nachweisen. Demgegenueber konnte bei Bestrahlungen von HNO-Tumoren nur in wenigen Studien die Wirksamkeit von Sucralfat signifikant belegt werden. Schlussfolgerung: Zusammenfassend kann man festhalten, dass Sucralfat bei niedriger Nebenwirkungsrate und geringem Preis zur Behandlung von radiogenen Schleimhautschaeden besonders im Beckenbereich beitraegt. (orig.)

  9. Extracción de cristalino transparente en pacientes hipermétropes Extraction of transparent crystalline lens in hypermetrope patients

    Directory of Open Access Journals (Sweden)

    Eduardo Rojas Alvarez

    2011-06-01

    Full Text Available OBJETIVOS: Describir los resultados obtenidos en la extracción de cristalino transparente de pacientes hipermétropes. MÉTODOS: Se efectuó un estudio descriptivo, prospectivo y longitudinal, en el período de septiembre de 2009 a febrero de 2010. Fueron estudiados 60 ojos de 30 pacientes con hipermetropía, quienes acudieron al Instituto Cubano de Oftalmología "Ramón Pando Ferrer" y no cumplieron los criterios establecidos para cirugía refractiva corneal. Se aplicó la fórmula Hoffer Q por IOL máster para el cálculo del lente intraocular, técnica quirúrgica estándar, facoemulsificación (facoaspiración, poder ultrasónico: 10 % (pulsado, vacío: 350 mmHg, flujo: 25 cc/min; túnel corneal, capsulorrexis amplia e implante de lente intraocular monofocal en saco capsular. Se realizó el análisis estadístico por promedio asociado a prueba T para datos pareados. RESULTADOS: La edad promedio fue de 39 ± 2,6 años. La longitud axil promedio fue de 21 ± 2 mm. La mejor agudeza visual sin corrección ascendió de 0,08 en el preoperatorio a 0,72 en el posoperatorio. La mejor agudeza visual con corrección varió de 0,92 a 0,98. El valor de la esfera se redujo de 5,25 a - 0,50 y el cilindro de 0,75 a - 0,25 dioptrías; en consecuencia, el equivalente esférico disminuyó de 4,75 en el preoperatorio a -1,00 dioptrías en el período posoperatorio, específicamente en el ojo dominante a 0,46 y en el no dominante a -0,97 dioptrÍas. CONCLUSIONES: La monovisión resulta efectiva en los pacientes. La extracción de cristalino transparente en pacientes hipermétropes es una opción útil cuando estos no son candidatos a cirugía refractiva corneal.OBJECTIVES: To describe the results obtained in the extraction of the transparent crystalline lens in hypermetrope patients. METHODS: A longitudinal, prospective and descriptive study was conducted from September, 2009 to February, 2010. Sixty eyes was studied from 30 patients presenting with

  10. Do operation management systems pay off?; Lohnt der Einsatz von Betriebsmanagementsystemen?

    Energy Technology Data Exchange (ETDEWEB)

    Brumme, M.; Fricke, J.

    1997-12-31

    Operation management systems are an indispensable tool for making those quick decisions so essential to our present level of technical and economic development. The utility of such an investment is evident in the quality of the analyses it permits and the efficiency with which it procures and distributes information. Process analyses require high-performance, practice-oriented systems in order to be delivered quickly, complete, and error-free. The present paper relates examples of projects where plant operators have profited from the procurement of an operation management system. The amortisation periods for these systems ranged between 16 and 29 months. Thus, operation management systems are an attractive option not only for new but also for old plants approaching the end of the lifetime. [Deutsch] Betriebsmanagementsysteme sind in der heutigen Zeit, wo es aus wirtschaftlicher und technischer Sicht auf schnelle Entscheidungen ankommt, ein unverzichtbares Hilfsmittel. Der Nutzen einer derartigen Investition zeigt sich in der Qualitaet der Analysen und in der effektiven Informationsbeschaffung und -verteilung. Die lueckenlose, fehlerfreie und schnelle Analyse von Prozessverlaeufen ist nur mit leistungsstarken und praxisgerechten Systemen moeglich. Die Anschaffung eines Betriebsmanagementsystems hat sich in den beispielhaft beschriebenen Projekten fuer den Anlagenbetreiber gelohnt. Die Amortisationszeiten liegen im Bereich von einem Jahr und 4 Monaten bis 2 Jahren und 5 Monaten. Das macht ein Betriebsmanagementsystem sowohl fuer den Einsatz in Neuanlagen als auch in Altanlagen mit begrenzter Restlebensdauer interessant. (orig./RHM)

  11. Clinical use of MR imaging-guided interventions; Klinischer Einsatz der interventionellen MRT (iMRT)

    Energy Technology Data Exchange (ETDEWEB)

    Kahn, T.; Schulz, T.; Moche, M.; Prothmann, S.; Schneider, J.P. [Klinik und Poliklinik fuer Diagnostische Radiologie, Univ. Leipzig (Germany)

    2003-07-01

    The integration of diagnostic and therapeutic procedures by MRI is based on the combination of excellent morphologic and functional imaging. The spectrum of MR-guided interventions includes biopsies, thermal ablation procedures, vascular applications, and intraoperative MRI. In all these applications, different scientific groups have obtained convincing results in basic developments as well as in clinical use. Interventional MRI (iMRI) is expected to attain an important role in interventional radiology, minimal invasive therapy, and monitoring of surgical procedures. (orig.) [German] Die Integration diagnostischer und therapeutischer Massnahmen durch die MRT basiert auf der Kombination von exzellenter morphologischer und funktioneller Bildgebung. Das Spektrum MR-gefuehrter Eingriffe reicht von Biopsien, thermischen Therapieverfahren, vaskulaeren Applikationen bis hin zum intraoperativen Einsatz der MRT. Auf allen Gebieten konnten von verschiedenen Arbeitsgruppen ueberzeugende Ergebnisse sowohl im Bereich der Grundlagenentwicklung als auch bei klinischen Anwendungen vorgelegt werden. Es ist davon auszugehen, dass die interventionelle MRT einen hohen Stellenwert im Bereich der interventionellen Radiologie, der minimal-invasiven Therapie und der Ueberwachung von operativen Eingriffen erlangen wird. (orig.)

  12. The application of plant tests for sediment evaluation; Der Einsatz von Pflanzentests bei der Sedimentbewertung

    Energy Technology Data Exchange (ETDEWEB)

    Feiler, U. [Bundesanstalt fuer Gewaesserkunde, Koblenz (Germany); Claus, E. [Bundesanstalt fuer Gewaesserkunde, Berlin (Germany); Heininger, P. [Bundesanstalt fuer Gewaesserkunde, Koblenz (Germany); Bundesanstalt fuer Gewaesserkunde, Berlin (Germany)

    2002-07-01

    The aim of the present study is to demonstrate that the use of higher plants in biotests for analyses of anthropogenically contaminated sediments yields valuable results, which may be included in a concept for the integrated assessment of waters. The results of this study prove that the selected aquatic plant, Lemna minor, is basically able to indicate contamination. In the aquatic test of the sediment extracts, it showed weak, but very selective, responses to certain classes of contaminants. Fractionating of the sample and subsequent chemical analysis combined with toxicity tests allow to narrow down the groups of substances causing toxic effects. This toxicity was confirmed by analyses of the pore waters and whole sediment samples. Together with other toxicity tests (e.g. standardized bioassays) and combined with biological benthos examinations, an overall judgment can be given for the integrated assessment of waters. (orig.) [German] Ziel der hier vorgestellten Untersuchungen war es zu zeigen, dass der Einsatz von hoeheren Pflanzen in Biotests zur Untersuchung anthropogenen belasteter Sedimente wertvolle Ergebnisse liefert, die in einem Konzept zur integrierten Gewaesserbewertung verwendet werden koennen. Die Ergebnisse dieser Arbeit machen deutlich, dass die ausgewaehlte Wasserpflanze Lemna minor Schadstoffbelastungen grundsaetzlich anzeigt. Im aquatischen Test der Sedimentextrakte weist sie eine zwar schwache, aber sehr selektive Reaktion auf bestimmte Schadstoffklassen auf. Die Fraktionierung der Probe mit anschliessender Stoffanlayse kombiniert mit Toxizitaetstests erlaubt die Eingrenzung der toxisch wirksamen Stoffgruppen. Diese toxische Belastung wurde durch die Porenwasser- und Gesamtsedimentuntersuchung bestaetigt. Zusammen mit weiteren Toxizitaetstests (z.B. standardisierte Biotests) und in Kombination mit benthosbiologischen Untersuchngen ergibt sich eine Gesamtaussage zur integrierten Gewaesserbewertung. (orig.)

  13. DeposiÃÃo de DiÃxido de Estanho-FlÃor (SnO2:F) em Substrato Transparente para Uso em CÃlulas FotoeletroquÃmicas

    OpenAIRE

    Francisco Marcone Lima

    2013-01-01

    Vidros condutores tÃm sido usados como Ãxidos condutores transparentes (OCTâs). Por causa da transmitÃncia na regiÃo visÃvel e baixa resistÃncia de filme os OCTâs tÃm sido usados como componente de cÃlulas fotoeletroquÃmicas ativadas por corante. Neste trabalho à feito vidros condutores, em escala de laboratÃrio, de dimensÃes 2,6 cm x 7,6 cm pela tÃcnica âspray pyrolysisâ, os vidros condutores sÃo aplicados na construÃÃo da cÃlula fotoeletroquÃmica com eletrodos imersos e da cÃlula de G...

  14. Use of secondary fuels in rotary kilns of the cement industry; Einsatz von Sekundaerstoffen in Drehofenanlagen der Zementindustrie

    Energy Technology Data Exchange (ETDEWEB)

    Hoenig, V. [Forschungsinstitut der Zementindustrie, Duesseldorf (Germany)

    1998-09-01

    Most cement works in Germany use secondary materials for cement production or are planning to do so. Many of the materials in question, such as used tyres, have been recycled in an environmentally acceptable way for decades, and a large body of experience has accumulated on their use in the cement industry. In the cement industry secondary materials are understood to comprise secondary fuels as well as secondary raw materials. The latter have for some part replaced the natural raw materials used for burning cement clinker, the preliminary product of cement. By using used tyres, used oil and other waste materials as secondary fuels the cement industry has for decades contributed to an environmentally acceptable form of waste disposal. The use of secondary materials has also enabled the cement industry to improve its economic situation. In response to the enactment of the Materials Recycling Law the cement industry has during the past few years turned its attention to the utilisation of other waste materials. The criteria relevant to the cement industry`s choice of a waste material as secondary material lastly depends on the process-related side constraints attending the clinker burning process and the requirements on the burning process with regard to product quality and environmental acceptability. [Deutsch] Die meisten Zementwerke in Deutschland setzen bei der Zementherstellung Sekundaerstoffe ein oder planen ihren Einsatz. Fuer einige dieser Stoffe, wie z.B. Altreifen gilt, dass sie bereits seit Jahrzehnten umweltvertraeglich verwertet werden, so dass viele Erfahrungen ueber deren Einsatz in der Zementindustrie vorliegen. Unter Sekundaerstoffen werden in der Zementindustrie sowohl Sekundaerbrennstoffe wie auch Sekundaerrohstoffe verstanden. Letztere ersetzen teilweise die natuerlichen Rohstoffe, aus denen der Zementklinker, das Vorprodukt des Zements, gebrannt wird. Bezueglich der Sekundaerbrennstoffe traegt die Zementindustrie schon seit Jahrzehnten zu einer

  15. Ecological aspects to the use of pretreated waste in thermal plants; Oekologische Aspekte beim Einsatz aufbereiteter Abfaelle in thermischen Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Friedel, M.; Urban, A.I. [Kassel Univ. (Gesamthochschule) (Germany). Fachgebiet Abfalltechnik

    1998-09-01

    The present contribution focuses on the input side of individual process techniques. It shows on the basis of example calculations how two parameters describing the incinerable (residual) waste that are of particular importance for unconventional thermal treatment methods, namely ``pollutant load`` and ``calorific value``, can be influenced by a recycling stage and then further by mechanical-biological pretreatment. [Deutsch] Im folgenden soll das Hauptaugenmerk auf die Inputseite zu den einzelnen thermischen Verfahren gelegt werden und anhand einer Beispielrechnung aufgezeigt werden, wie sich die fuer einen Einsatz in nichtkonventionellen thermischen Verfahren besonders wichtigen Parameter des aufbereiteten (Rest)Abfalls `Schadstoffbelastung` und `Heizwert` zunaechst durch eine Verwertung und weiter durch eine mechanisch-biologische Vorbehandlung veraendern. (orig./SR)

  16. Use of modeling and simulation in the planning, analysis and interpretation of ultrasonic testing; Einsatz von Modellierung und Simulation bei der Planung, Analyse und Interpretation von Ultraschallpruefungen

    Energy Technology Data Exchange (ETDEWEB)

    Algernon, Daniel [SVTI Schweizerischer Verein fuer technische Inspektionen, Wallisellen (Switzerland). ZfP-Labor; Grosse, Christian U. [Technische Univ. Muenchen (Germany). Lehrstuhl fuer Zerstoerungsfreie Pruefung

    2016-05-01

    Acoustic testing methods such as ultrasound and impact echo are an important tool in building diagnostics. The range includes thickness measurements, the representation of the internal component geometry as well as the detection of voids (gravel pockets), delaminations or possibly locating grouting faults in the interior of metallic cladding tubes of tendon ducts. Basically acoustic method for non-destructive testing (NDT) is based on the excitation of elastic waves that interact with the target object (e.g. to detect discontinuity in the component) at the acoustic interface. From the signal received at the component surface this interaction shall be detected and interpreted to draw conclusions about the presence of the target object, and optionally to determine its size and position (approximately). Although the basic underlying physical principles of the application of elastic waves in NDT are known, it can be complicated by complex relationships in the form of restricted access, component geometries, or the type and form of reflectors. To estimate the chances of success of a test is already often not trivial. These circumstances highlight the importance of using simulations that allow a theoretically sound basis for testing and allow easy optimizing test systems. The deployable simulation methods are varied. Common are in particular the finite element method, the Elasto Finite Integration Technique and semi-analytical calculation methods. [German] Akustische Pruefverfahren wie Ultraschall und Impact-Echo sind ein wichtiges Werkzeug der Bauwerksdiagnose. Das Einsatzspektrum beinhaltet Dickenmessungen, die Darstellung der inneren Bauteilgeometrie ebenso wie die Ortung von Kiesnestern, Delaminationen oder u.U. die Ortung von Verpressfehlern im Innern metallischer Huellrohre von Spannkanaelen. Grundsaetzlich beruhen akustische Verfahren zur Zerstoerungsfreien Pruefung (ZfP) auf der Anregung elastischer Wellen, die mit dem Zielobjekt (z. B. zu detektierende Ungaenze

  17. Technical and economic aspects of fuel cell applications in space HVAC systems; Technische und wirtschaftliche Aspekte zum Einsatz von Brennstoffzellen in der Gebaeudeversorgung

    Energy Technology Data Exchange (ETDEWEB)

    Handke, J; Handschin, E

    1999-12-31

    There are two different types of fuel cells for small-scale applications, li.e. polymer electrolyte membrane fuel cells (PEMFC) and high-termperature fuel cells with ceramic solid electrolytes (SOFC). Both types of fuel cells have different advantages and shortcomings. One of the main problems, however, is the fact that research is still going on and that commercial fuel cell systems for space HVAC applications are still not available. (orig.) [Deutsch] Nach dem heutigen Stand werden zwei unterschiedliche Brennstoffzellen-Typen zum Einsatz in Kleinanlagen entwickelt. Neben der zu Klasse der Niedertemperatur-Brennstoffzellen gehoerenden Polymer-Elektrolyt-Membran-Brennstoffzelle (PEMFC) ist dies die Hochtemperatur-Brennstoffzelle auf der Basis eines keramischen Festelektrolyten (SOFC). Beide Brennstoffzellen-Typen haben unterschiedliche Vor- und Nachteile fuer den Einsatz zur Gebaeudeversorgung. Eines der Hauptprobleme, das allerdings beide Zellentypen gemeinsam haben, besteht in der noch nicht abgeschlossenen Entwicklung und - daraus resultierend - der fehlenden kommerziellen Verfuegbarkeit im Bereich der Gebaeudeversorgung. (orig./MM)

  18. Marcos GRADE de la evidencia a la decisión (EtD: un enfoque sistemático y transparente para tomar decisiones sanitarias bien informadas. 1: Introducción

    Directory of Open Access Journals (Sweden)

    Pablo Alonso-Coello

    2018-03-01

    Full Text Available Los médicos y quienes elaboran guías y políticas a veces pasan por alto criterios importantes, les dan un peso indebido o no usan la mejor evidencia disponible para informar sus juicios. Los sistemas explícitos y transparentes para la toma de decisiones pueden ayudar a garantizar que se consideren todos los criterios importantes, y que las decisiones estén basadas en la mejor evidencia disponible. El grupo de trabajo GRADE ha desarrollado marcos «de la evidencia a la decisión» (EtD para los diferentes tipos de recomendaciones o decisiones. El objetivo de los marcos EtD es ayudar a los paneles a usar la evidencia de una manera estructurada y transparente para informar las decisiones respecto de las recomendaciones clínicas, decisiones de cobertura sanitaria y recomendaciones o decisiones sobre el sistema sanitario o sobre salud pública. Los marcos EtD tienen una estructura común: formulación de una pregunta, evaluación de la evidencia y conclusiones. No obstante, existen diferencias entre los marcos para cada tipo de decisión. Los marcos EtD informan a los usuarios sobre los juicios que se han hecho y la evidencia que los apoya dotando de transparencia la base para las decisiones de los que tienen que tomarlas. Los marcos EtD también facilitan la diseminación de las recomendaciones y permiten a los decisores de otros ámbitos adoptar recomendaciones o decisiones, o adaptarlas a su contexto. El siguiente artículo es una traducción del artículo original publicado en British Medical Journal. Los marcos EtD se utilizan actualmente en el marco del Programa de Guías de Práctica Clínica en el Sistema Nacional de Salud, coordinado por GuíaSalud.

  19. Anforderungen an ein System zur Evaluierung potentieller Langzeitschäden durch den Einsatz gentechnischer Methoden in der Nahrungsmittelherstellung und -verarbeitung

    OpenAIRE

    Katzek, Jens

    2000-01-01

    Der Einsatz der gentechnischer Methoden bei der Synthese und Veränderung von Lebensmittelbestandteilen unterliegt strengen gesetzlichen Regeln, die eine umfangreiche Risikoabschätzung vor dem Inverkehrbringen gewährleisten sollen. Erfahrungen aus anderen Technikbereichen – insbesondere der Pharmazie – zeigen jedoch, daß Risikoabschätzungen vor dem Inverkehrbringen eines Produktes nicht in der Lage sind, alle möglichen Rahmenbedingungen für die Evaluierung des Gefährdungspotentials bereits im ...

  20. High-performance vacuum tubes for more energy efficiency. Building-integrated CPC vacuum tube collectors unite several functions.; Hochleistungs-Vakuumroehren fuer mehr Energieeffizienz. Gebaeudeintegrierte CPC-Vakuumroehren-Kollektoren vereinen mehrere Funktionen

    Energy Technology Data Exchange (ETDEWEB)

    Theiss, Eric

    2013-10-15

    The performance of solar collectors primarily contributes to increased efficiency and reduced operating costs of solar thermal systems. With the use of building-integrated CPC vacuum tube collectors an extremely high energy yield is achieved on a smaller collector gross area. As a building-integrated system solution the CPC facade provide panels in addition to its use as spandrel panels within the glazed buildings not only an architectural design element, but unite as a multifunctional component for several functions. [German] Die Leistungsfaehigkeit der Solarkollektoren traegt primaer zur Effizienzsteigerung und Reduzierung der Betriebskosten einer Solarthermieanlagen bei. Mit dem Einsatz gebaeudeintegrierter CPC-Vakuumroehrenkollektoren wird auf einer kleineren Kollektorbruttoflaeche ein extrem hoher Energieertrag erreicht. Als gebaeudeintegrierte Systemloesung bieten die CPC-Fassadenkollektoren neben dem Einsatz als Bruestungselemente auch innerhalb der verglasten Gebaeuden nicht nur ein architektonisches Gestaltungselement, sondern vereinen als multifunktionaler Bestandteil noch mehrere Funktionen.

  1. Jeopardy alarm system - a building technology like any other technology?; Gefahrenmeldetechnik - eine Gebaeudetechnik wie jede andere?

    Energy Technology Data Exchange (ETDEWEB)

    Hegewald, B. [ZVEI, Fachkreis Ueberfall- und Einbruchmeldeanlagen, Frankfurt am Main (Germany)]|[Siemens AG, Muenchen

    1995-12-31

    In chapter 15 of the anthology about building control the jeopardy alarm system technology is described. The following aspects are discussed: importance of the safety, definition of jeopardy alarm systems, application of safety technique, instructions, guidelines and regulations, advantages of safety systems, integration or combination. (BWI) [Deutsch] Kapitel 15 des Sammelbandes ueber Buidling Control ist der Gefahrenmeldetechnik gewidmet. In diesem Zusammenhang wird auf folgende Themenbereiche eingegangen: Stellenwert der Sicherheit; Definition der Gefahrenmeldeanlagen; Einsatz der Sicherungstechnik; Vorschriften, Richtlinien und Bestimmung; Vorteile von Sicherungssystemen; Integration oder Kombination. (BWI)

  2. Einsatz und Wirksamkeit von Systemtherapien bei Erwachsenen mit schwerer Neurodermitis: Erste Ergebnisse des deutschen Neurodermitis-Registers TREATgermany.

    Science.gov (United States)

    Schmitt, Jochen; Abraham, Susanne; Trautmann, Freya; Stephan, Victoria; Fölster-Holst, Regina; Homey, Bernhard; Bieber, Thomas; Novak, Natalija; Sticherling, Michael; Augustin, Matthias; Kleinheinz, Andreas; Elsner, Peter; Weidinger, Stephan; Werfel, Thomas

    2017-01-01

    Versorgungsregister dienen der Erfassung des Einsatzes und der Wirksamkeit von Therapien unter realen Versorgungsbedingungen und sind als Basis einer evidenzbasierten Gesundheitsversorgung unverzichtbar. Das deutsche Neurodermitis-Register TREATgermany wurde als weltweit erstes Register für Patienten mit schwerer Neurodermitis 2011 initiiert. Erwachsene mit schwerer Neurodermitis (aktuelle/frühere antientzündliche Systemtherapie und/oder objektiver SCORAD ≥ 40) werden über einen Zeitraum von 24 Monaten prospektiv beobachtet. Anhand validierter Erhebungsinstrumente werden die klinische Erkrankungsschwere (EASI, SCORAD), Lebensqualität (DLQI), Symptome, globale Erkrankungsschwere sowie die Patientenzufriedenheit erfasst und die durchgeführten Therapien dokumentiert. Die vorliegende Analyse beschreibt die Charakteristika, Therapiewahl und Wirksamkeit der eingesetzten antiinflammatorischen Systemtherapien der bis Oktober 2014 eingeschlossenen Patienten. An fünf Zentren wurden insgesamt 78 Patienten (Durchschnittsalter 39 Jahre, 61 % männlich) eingeschlossen. Bei den Patienten besteht eine hohe Inanspruchnahme ambulanter und stationärer Leistungen. Ciclosporin war das am häufigsten eingesetzte Systemtherapeutikum und zeigte die höchste klinische Effektivität (EASI-50-Ansprechrate 51 %; EASI-75-Ansprechrate 34 % nach zwölfwöchiger Therapie). Azathioprin, Methotrexat (MTX), Prednisolon oral, Mycophenolat, Alitretinoin und Leflunomid wurden ebenfalls bei einzelnen Patienten eingesetzt. Die vorliegende Registerauswertung gibt wichtige Hinweise zur derzeitigen Versorgung von Erwachsenen mit schwerer Neurodermitis in Deutschland, dokumentiert die hohe Erkrankungslast, den Nutzen vorhandener Therapien und den Bedarf an weiteren, effektiven und in der Langzeitanwendung sicheren Therapieoptionen. © 2017 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

  3. Application of latent heat storage devices and thermal solar collectors; Einsatz von Latentwaermespeichern und Solarthermie

    Energy Technology Data Exchange (ETDEWEB)

    Leonhardt, Corinna; Mueller, Dirk [RWTH Aachen, E.ON Energieforschungszentrum, Lehrstuhl fuer Gebaeude- und Raumklimatechnik (Germany)

    2010-12-15

    Modern heating systems for buildings need a supply temperature of approximately 35 C. In this temperature range it is possible to use low temperature storage systems. Therefore the heat losses over the envelope can be reduced because of the smaller temperature difference between the ambient air and the storage. In order to use the existing technique of the buffer storages more efficiently, latent heat storage devices are put into the storage volume. For the operating temperature range of 30 to 40 C paraffins or salt hydrates can be used. Because of the low operating temperature it is possible to integrate solar thermal systems in the heating system (especially in spring and autumn). The overall system performance will be analysed. (Copyright copyright 2010 Ernst and Sohn Verlag fuer Architektur und technische Wissenschaften GmbH and Co. KG, Berlin)

  4. Improved product planning by problem-oriented use of preventive quality management methods; Verbesserte Produktplanung durch den problemorientierten Einsatz praeventiver Qualitaetsmanagementmethoden

    Energy Technology Data Exchange (ETDEWEB)

    Lesmeister, F.

    2001-07-01

    The development of innovative products meeting the customer's needs is getting increasingly complex. The production cost and the time to market must be reduced constantly. Modern methods of preventive quality management like QFD, FMEA and Target Costing offer help but they tend to be complex and costly. The author attempted a modularisation of the methods, with the possibility of linking modules as desired using a commercially available software. [German] Die Entwicklung innovativer, den Kundenbeduerfnissen entsprechender Produkte wird zunehmend komplexer. Die Unternehmen sind gezwungen, die Kosten der Produkterstellung stetig zu reduzieren und den Time-to-Market zu verkuerzen. Moderne Methoden des praeventiven Qualitaetsmanagements wie das QFD, die FMEA und das Target Costing bieten Unterstuetzungsmoeglichkeiten zur Loesung der damit zusammenhaengenden Probleme. Doch ist der Einsatz der oft komplizierten Methoden sehr aufwendig. Gruende hierfuer sind die oft starren Anwendungsschemata, die einem situationsspezifischen Einsatz der Methoden entgegenstehen, und die fehlende Verknuepfung der Methoden. Ergebnis der Arbeit ist eine Modularisierung der Methoden und eine Verknuepfung der einzelnen Methodenmodule. Hierdurch koennen die Methoden an die jeweilige Problemsituation angepasst eingesetzt und dadurch der gesamte Produktentwicklungsprozess durchgaengig unterstuetzt werden. Die Anwendung der Methoden wird mittels einer auf dem Markt erhaeltlichen Software unterstuetzt. (orig.)

  5. Resultados refractivos obtenidos mediante la cirugía del cristalino transparente en altas miopías Refractive outcomes in the transparent crystalline surgery to treat high myopia

    Directory of Open Access Journals (Sweden)

    Patricia Andújar Coba

    2010-06-01

    Full Text Available INTRODUCCIÓN: Se realizó un estudio descriptivo, retrospectivo, de corte longitudinal donde se incluyeron 212 pacientes (ojos con diagnóstico de altas miopías que fueron sometidos a cirugía facorrefractiva en el Servicio de Microcirugía del Instituto Cubano de Oftalmología "Ramón Pando Ferrer" en el período de tiempo comprendido entre abril del 2001 y abril del 2006. OBJETIVOS: Valorar los resultados refractivos obtenidos mediante la cirugía del cristalino transparente en altas miopías, analizando los índices de seguridad y eficacia del procedimiento. MÉTODOS: Se utilizaron métodos de estadística descriptiva como el cálculo de frecuencias absolutas, relativas (%, y desviación estándar para presentar resultados evolutivos y la incidencia de complicaciones. La información se obtuvo de las evaluaciones preoperatorias y posoperatorias (3 meses,todo fue procesado en el sistema SPSS para Windows y se presentó en forma de tablas y gráficos para su mejor entendimiento. RESULTADOS: En nuestro trabajo encontramos en el preoperatorio que la agudeza visual promedio sin corrección mejoraba de un valor de 0,2 a 0,7 en el posoperatorio, la seguridad del proceder quirúrgico fue calculada en un índice de 2 , con una eficacia de tres líneas de ganancia promedio en la cartilla de Snellen y un astigmatismo promedio inducido de 0,74 dioptrías. CONCLUSIONES: Se halló mejoría indudable de la agudeza visual con corrección y sin ella después de la cirugía. La eficacia y seguridad del proceder quirúrgico fue más que demostrada con el alto porcentaje de pacientes que quedaron con una AVsc satisfactoria posquirúrgica. Identificamos la opacidad de cápsula posterior como la complicación más frecuente en afáquicos. En los pacientes a los cuales no se les implantó lente intraocular encontramos el mayor número de complicaciones posquirúrgicas.INTRODUCTION: A retrospective, cross-sectional and descriptive study was conducted in 212

  6. Ranking of CT in persistent vertigo after implantation of stapes prostheses; Stellenwert der Computertomographie bei persistierenden Gleichgewichtsstoerungen nach dem Einsatz von Stapesplastiken

    Energy Technology Data Exchange (ETDEWEB)

    Koesling, S. [Leipzig Univ. (Germany). Klinik fuer Diagnostische Radiologie; Woldag, K. [Leipzig Univ. (Germany). Klinik und Poliklinik fuer Hals-Nasen-Ohren-Krankheiten; Meister, E.F. [Leipzig Univ. (Germany). Klinik und Poliklinik fuer Hals-Nasen-Ohren-Krankheiten; Reschke, I. [Leipzig Univ. (Germany). Klinik fuer Diagnostische Radiologie; Schulz, H.G. [Leipzig Univ. (Germany). Klinik fuer Diagnostische Radiologie

    1995-01-01

    10 of 150 patients had persistent vertigo after implanation of stapes prostheses. These patients were evaluated by high resolution CT in the axial and coronal plane. Scans showed in all cases findings which related to the symptoms. The CT findings were proved intraoperatively in 9 cases. A new indirect sign of a perilymphatic fistula is described in form of an air bulla at the end of the prosthesis. Retympanotomy could be planned better with the help of HR-CT. (orig.) [Deutsch] Von 150 Patienten zeigten 10 nach dem Einsatz einer Stapesprothese eine persistierende vestibulaere Symptomatik. Mittels der hochaufloesenden Felsenbein-CT in axialer und koronarer Schnittfuehrung konnten in allen Faellen in Symptomatik erklaerende Befunde erhoben werden. Eine operative Bestaetigung erfolgte in 9 Faellen. Als bisher in der Literatur in diesem Zusammenhang nicht beschriebenes, indirektes Zeichen einer Perilymphfistel wurde eine kleine Luftblase am Prothesenende nachgewiesen. Die HR-CT hat sich als wesentliche Erleichterung bei der Planung einer Retympanotomie erwiesen. (orig.)

  7. Dimensioning of activation systems using submerged membranes at municipal sewage treatment plants; Bemessung von Membranbelebungsanlagen beim Einsatz zur Reinigung kommunaler Abwaesser

    Energy Technology Data Exchange (ETDEWEB)

    Ohle, P.; Dorgeloh, E. [Technische Hochschule Aachen (DE). Inst. fuer Siedlungswasserwirtschaft (ISA)

    1999-07-01

    Dimensioning of conventional activation systems in Germany as a rule relies on instruction sheet A131 of the Abwassertechnische Vereinigung or follows the Hochschulgruppen approach (HSG). They contain recommendations as to the size of the nitrification and denitrification zones, the amount of oxygen supplied and sludge production, and the size of the final sedimentation tank. For the use of sludge activation techniques by means of submerged membranes at municipal sewage treatment plant there so far do not exist any clues to dimensioning that make allowance for the modified boundary conditions. The present paper analyses instruction sheet A131 for its suitability as a basis in the dimensioning of sludge activation systems with submerged membranes at municipal sewage treatment plant. Then the dimensioning instructions are modified to suit the changed boundary conditions, and recommendations for the dimensioning of activation systems with submerged membranes on the basis of extensive studies carried out at the Institut fuer Siedlungswasserwirtschaft ISA of Aachen Technical University RWTH are given. (orig.) [German] Die Bemessung konventioneller Belebungsverfahren erfolgt in Deutschland i.d.R. auf der Grundlage des Arbeitsblatts A 131 der Abwassertechnischen Vereinigung bzw. nach dem Hochschulgruppenansatz (HSG). Sie enthalten Empfehlungen bezueglich der Dimensionierung von Nitrifikations- und Denitrifikationszone, Sauerstoffversorgung, Schlammproduktion und Nachklaerbecken. Fuer den Einsatz von Membranbelebungsanlagen in kommunalen Klaeranlagen existieren bislang keine Bemessungshinweise, die den veraenderten Randbedingungen Rechnung tragen. Der vorliegende Beitrag analysiert das Arbeitsblatt A 131 in Hinsicht auf die Moeglichkeit zur Anwendung fuer die Bemessung von Membranbelebungsanlagen beim Einsatz zur kommunalen Abwasserreinigung. Im Weiteren erfolgt die Modifikation der Bemessungshinweise hinsichtlich der geaenderten Randbedingungen und die Angabe von

  8. Recommendations for the use of bioindicators in the frame of Environmetnal Impact Assessment (EIA); Empfehlungen zum Einsatz von Bioindikationsverfahren im Rahmen des Umweltvertraeglichkeitspruefungsgesetzes (UVPG)

    Energy Technology Data Exchange (ETDEWEB)

    Zimmermann, R.D. [Gesellschaft Deutscher Chemiker (GDCh) (Germany). Arbeitskreis Bioindikation]|[Fachhochschule Bingen (Germany). Fachbereich Umweltschutz; Debus, R. [Fachhochschule Wiesbaden (Germany). Fachbereich MND - Umwelttechnik; Franzaring, J. [AB-DLO Wageningen (Netherlands); Hoepker, K.A. [Landesanstalt fuer Umweltschutz, Karlsruhe (Germany); Maier, W. [TUEV Ecoplan Umwelt GmbH, Filderstadt (Germany); Reiml, D. [TUEV Ecoplan Umwelt GmbH, Muenchen (Germany); Finck, M. [Verein Deutscher Ingenieure (VDI) - Kommission Reinhaltung der Luft (RdL), Duesseldorf (Germany)

    1998-11-01

    The paragraph 2 of the German law on Environmental Impact Assessment (law on EIA) requires to determine, to record and to assess the effects which proposed major projects in the areas of industry, local government and transport have on man, animals, plants, soil, water, air, climate, landspace, assets and cultural heritage including the interactions between different media. For this purpose, bioindication is an effective tool. Up to now, the different methods of bioindication were not applied sufficiently although some of the methods have already been standardised in guidelines (VDI, DIN). Users and authorities might feel insecure which bioindication method should be applied when assessing the impacts of a given project. This paper gives recommendations which bioindication method should be applied for the different major projects listed in the law on EIA. A widespread set of data obtained by the use of bioindicators is necessary to meet the demands of paragraph 2. (orig.) [Deutsch] Das Umweltvertraeglichkeitspruefungsgesetz (UVPG) verlangt in Paragraph 2 die Ermittlung, Beschreibung und Bewertung der Auswirkungen eines Vorhabens auf Menschen, Tiere und Pflanzen, Boden, Wasser, Luft, Klima und Landschaft einschliesslich der jeweiligen Wechselwirkungen sowie auf Kultur- und sonstige Sachgueter. Die Bioindikation kann hier wesentliche Dienste leisten. Bislang kamen die verschiedenen, z.T. in Richtlinien (VDI, DIN) vereinheitlichten Verfahren noch zu selten zum Einsatz. Ein Grund hierfuer duerfte in der Unsicherheit der Anwender sowie der Genehmigungsbehoerden liegen, welches Bioindikationsverfahren fuer welches UVPG-Vorhaben eine geeignete Erfassungs- und Bewertungsmethode erlaubt. Zu diesem Zweck werden fuer ausgewaehlte, gemaess UVPG genehmigungsbeduerftige Vorhaben Empfehlungen zum Einsatz von Bioindikationsverfahren erteilt. Erst durch zahlreiche Untersuchungsergebnisse aus diesen Verfahren koennen die Forderungen nach Paragraph 2 UVPG aussagekraeftig erfuellt

  9. Use of pyrolysis gas from coal as reburn fuel. Final report; Einsatz von kohlestaemmigem Pyrolysegas als Reduktionsbrennstoff. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Greul, U.; Magel, C.; Moersch, O.; Ruediger, H.; Storm, C.; Schnell, U.; Spliethoff, H.; Hein, K.R.G.

    1996-12-31

    koennen. Die Brennstoffstufung unter Verwendung von kohlestaemmigen Gasen wurde experimentell im Hinblick auf die wichtigsten Verfahrensparameter, wie z.B. die Kohleart, Entgasungsrate, Temperatur, Verweilzeit und Stoechiometrie untersucht. In einem Flugstrom- und einem Wirbelschichtreaktor wurde der Einfluss der Entgasungstemperatur auf Restkohle und Pyrolyseprodukte, die Verteilung des Brennstoffstickstoffs, die Gas- und Teerqualitaet und deren Auswirkungen auf die NO{sub x}-Bildung und Reduktion bei der gestuften Verbrennung bestimmt. Die Validierung des mathematischen Simulationsmodells erfolgte mit den experimentell gewonnenen Daten. Als wesentliche Kriterien fuer die erreichbare NO{sub x}-Minderung werden Temperatur, Luftzahl und Verweilzeit in der Reduktionszone des Verbrennungsreaktors angesehen. Die Pyrolyseversuche zeigten den starken Einfluss der Kohleart und der Entgasungsbedingungen auf die Zusammensetzung der Gase und auf die erreichbare NO{sub x}-Minderung. Die in den Pyrolysegasen enthaltenen Teere mit ihren Stickstoffverbindungen verbessern die Reduktionswirkung vorhandener Stickstoffoxide. Durch den Einsatz der Pyrolysegase als Reduktionsbrennstoff koennen NO{sub x}-Emissionen unter 200 mg/m{sup 3} bei Luftzahlen um 0,95 erreicht und unterschritten werden. (orig./SR)

  10. Geschlechterstereotype im Einsatz

    Directory of Open Access Journals (Sweden)

    Erika Kegyes

    2007-11-01

    Full Text Available Die umfangreiche Monographie gehört zum Forschungsbereich der kritischen angewandten Linguistik (Critical Applied Linguistics und liegt sowohl theoretisch als auch praktisch im Schnittpunkt der gender- und werbesprachlichen Untersuchungen.

  11. Full service; Voller Einsatz

    Energy Technology Data Exchange (ETDEWEB)

    Weber, Tilman

    2013-07-15

    Maintenance of wind turbines is a core business for the manufacturers. With long-term contracts they retain customers. Are now all carefree? [German] Instandhaltung von Windturbinen wird fuer die Hersteller ein Kerngeschaeft. Mit Langzeitvertraegen binden sie Kunden an sich. Sind nun alle rundum sorgenfrei?.

  12. Einsatz von Lamellenabscheidern

    Directory of Open Access Journals (Sweden)

    Augustínová Edita

    2001-09-01

    Full Text Available V súvislosti s požiadavkou efektívnejšieho èistenia komunálnych odpadových vôd vyplývajú pre mnohé èistiarne odpadových vôd urèité povinnosti, súvisiace s prevádzkou. Pritom aktivaèné a dosadzovacie nádrže musia by spravidla približne zdvojnásobené. Výstavba dodatoèných nádrží so zodpovedajúcim strojným vybavením je najmä kvôli vyšším investíciam a používanej prevádzke nie vždy doporu-èovaná. Jedno z východísk riešenia tohoto problému predstavuje aplikácia lamelových odluèovaèov, ktoré sú montovanh do aktivácie. Týmto môžeme za využitia existujúceho objemu aktivácie a bez zväèšovania dosadzovania dosiahnu požadované hodnoty pre odstraòovanie živín.

  13. Building Languages

    Science.gov (United States)

    ... Glossary Contact Information Information For… Media Policy Makers Building Languages Recommend on Facebook Tweet Share Compartir Communicating ... any speech and only very loud sounds. Close × “Building Blocks” “Building Blocks” refers to the different skills ...

  14. L E E guide on electric power supply in high rise buildings. tot. rev. ed.; L E E. Leitfaden Elektrische Energie im Hochbau

    Energy Technology Data Exchange (ETDEWEB)

    Hennings, D.; Hinz, E.; Steinmueller, B.; Grossklos, M.

    2000-07-01

    Energy policy aiming at sustainability must take account of the noxious effects of fossil fuels. This guide will help to solve this problem. It is an easy to handle tool for integral planning and optimisation of electric power supply in administrative and office buildings, with a standard projecting procedure, a method for improving electric systems in buildings on the basis of characteristic values, and hints for planning and optimisation. It addresses builder owners and investors as well as architects, planners, engineers and energy consultants all of whom may be concerned in the planning of a building and its technical facilities. [German] Eine am Ziel der Nachhaltigkeit orientierte Energiepolitik muss Konsequenzen draus ziehen, dass der Einsatz der fossilen Energietraeger, auf denen unsere Energieversorgung bisher basiert, mit schaedlichen Umweltauswirkungen verbunden ist. Kohlendioxid und andere klimarelevante Spurengase heizen die Erdatmosphaere auf und drohen zur Klimakatastrophe zu fuehren; Stickoxid und Schwefeldioxid belasten mit dem sauren Regen Boden, Gewaesser und ganze Oekosysteme. Der vorliegende Leitfaden 'Elektrische Energie im Hochbau' will hier Abhilfe schaffen. Er stellt ein gut zu handhabendes Werkzeug dar, mit dessen Hilfe eine integrale Planung und Optimierung des rationellen Einsatzes elektrischer Energie in Dienstleistungsgebaeuden moeglich ist. Inhalte des Leitfadens sind die Darstellung des Planungsablaufs, ein Kennwertverfahren zur Verwertung und Verbesserung von elektrischen Anwendungen im Gebaeudebereich als Massnahme zur Investitions- und Betriebskostenreduzierung sowie Hinweise fuer Planung und Optimierung. Der Leitfaden richtet sich sowohl an die Bauherren bzw. Investoren als auch die an der Gebaeude- und Technikplanung Beteiligten, also die Architekten, Planer, Ingenieure und Energieberater. (orig.)

  15. Combined use of solar heat and cogeneration - a perspective for district heating?; Kombinierter Einsatz von solarer Waerme und Kraft-Waerme-Kopplung - eine Perspektive fuer die Nahwaerme?

    Energy Technology Data Exchange (ETDEWEB)

    Entress, J. [Deutsches Zentrum fuer Luft- und Raumfahrt (DLR), Stuttgart (Germany). Abt. Systemanalyse und Technikbewertung; Steinborn, F. [Zentrum fuer Sonnenenergie- und Wasserstoff-Forschung Baden-Wuerttemberg (ZSW), Stuttgart (Germany). Fachgebiet Systemanalyse

    1998-02-01

    With Cogeneration of Heat and Power (CHP), climate-endangering CO{sub 2}-emissions can be reduced singificantly. The heat produced can be delivered at prices comparable to those of conventionally produced heat. With solar district heating, yet higher CO{sub 2}-savings are possible but at higher cost. Promising is a combination of CHP and solar district heating: The heat storage of the solar system can be used to level out heat demand, leading to smooth CHP operation, while heat generated by CHP can be used to substitute for low irradiation during the winter period. However, calculations together with simulation and optimization indicate that combining CHP and solar district heating is not the optimal solution in all cases. (orig.) [Deutsch] Der Einsatz von Blockheizkraftwerken (BHKW) kann zu einer deutlichen Reduzierung der klimagefaehrdenden CO{sub 2}-Emissionen beitragen. Dabei kann die ausgekoppelte Waerme etwa zum gleichen Preis wie konventionell erzeugte Waerme abgegeben werden. Hoehere CO{sub 2}-Einsparungen lassen sich hingegen mit solarer Nahwaerme erzielen, allerdings zu hoeheren Kosten. Eine Kombination dieser beiden Waermetechniken verspricht Vorteile: Einerseits kann der Waermespeicher des Solarsystems auch zum Ausgleich von Lastspitzen beim Betrieb des BHKW`s genutzt werden. Andererseits kann die waehrend der einstrahlungsarmen Wintermonate fehlende solare Waerme durch das BHKW erzeugt werden. Detaillierte Simulations- und Optimierungsrechnungen zeigen jedoch, dass eine Kombination dieser Waermetechniken nicht immer empfehlenswert ist. (orig.)

  16. Investigations into the use of bacteria for enhanced recovery of petroleum; Untersuchungen zum Einsatz von Bakterien zur Erhoehung des Entoelungsgrades in Erdoellagerstaetten

    Energy Technology Data Exchange (ETDEWEB)

    Amro, M.

    1995-06-01

    Strains of bacteria were investigated with a view to their applicability and efficiency in enhanced recovery of petroleum. The mechanisms of enhanced recovery with bacteria were to be clarified as well. The experiments were carried out as static autoclave experiments without bedrock and as dynamic flooding experiments in a model pore space (Bentheim sandstone and carbonate rock) under the conditions of North German petroleum deposits. The static experiments carried out preliminary to the more time-consuming dynamic flooding experiments were to help with an optimized design of the injection experiments. (orig.) [Deutsch] Die vorliegende Arbeit hat zum Ziel, entoelungswirksame Bakterienstaemme zu untersuchen und hinsichtlich der durch sie bewirkten Erhoehung des Entoelungsgrades zu bewerten. Gleichzeitig sollen die Mechanismen aufgeklaert werden, die der Entoelungsverbesserung durch Einsatz von Bakterien zugrunde liegen. Die Experimente wurden als statische Autoklavenversuche ohne Lagerstaettengestein sowie als dynamische Flutversuche im Modellporenraum (Bentheimer Sandstein und karbonatisches Gesteinsmaterial) unter Bedingungen norddeutscher Lagerstaetten durchgefuehrt. Die statischen Versuche, die als Auswahltests den aufwendigeren dynamischen Flutversuchen vorgeschaltet waren, sollten dazu beitragen, die Flutversuche gezielt konzipieren zu koennen. (orig./EF)

  17. Building America

    Energy Technology Data Exchange (ETDEWEB)

    Brad Oberg

    2010-12-31

    IBACOS researched the constructability and viability issues of using high performance windows as one component of a larger approach to building houses that achieve the Building America 70% energy savings target.

  18. Building calculations

    DEFF Research Database (Denmark)

    Jensen, Bjarne Christian; Hansen, Svend Ole

    Textbook on design of large panel building including rules on robustness and a method for producing the Statical documentattion......Textbook on design of large panel building including rules on robustness and a method for producing the Statical documentattion...

  19. Herstellung und Charakterisierung von ZnO1-xSx-Dünnschichten : Dotierung mit Wasserstoff und Einsatz in ZnO1-xSx/GaN-Heterostruktur-Leuchtdioden

    OpenAIRE

    Kronenberger, Achim

    2013-01-01

    Das ternäre Materialsystem ZnO1-xSx ist für den Einsatz als Cd-freie Pufferschicht in Solarzellen, für Halbleiter-Heterostrukturen (z.B. Leuchtdioden) oder als Bandkanten-Filter interessant, da sich die energetische Lage von Valenzband-Maximum und Leitungsband-Minimum und somit ebenfalls die Energie der Bandlücke durch die Komposition beeinflussen lassen. Zusätzlich eignet es sich aufgrund der damit einhergehenden Veränderung der elektrischen und phononischen Eigenschaften als Modelsystem für...

  20. Solar building

    OpenAIRE

    Zhang, Luxin

    2014-01-01

    In my thesis I describe the utilization of solar energy and solar energy with building integration. In introduction it is also mentioned how the solar building works, trying to make more people understand and accept the solar building. The thesis introduces different types of solar heat collectors. I compared the difference two operation modes of solar water heating system and created examples of solar water system selection. I also introduced other solar building applications. It is conv...

  1. Building envelope

    CSIR Research Space (South Africa)

    Gibberd, Jeremy T

    2009-01-01

    Full Text Available for use in the building. This is done through photovoltaic and solar water heating panels and wind turbines. Ideally these are integrated in the design of the building envelope to improve the aesthetic quality of the building and minimise material... are naturally ventilated. Renewable energy The building envelope includes renewable energy generation such as photovoltaics, wind turbines and solar water heaters and 10% of the building’s energy requirements are generated from these sources. Views All...

  2. Auxiliary buildings

    International Nuclear Information System (INIS)

    Lakner, I.; Lestyan, E.

    1979-01-01

    The nuclear power station represents a complicated and a particular industrial project. Consequently, the design of the auxiliary buildings serving the power station (offices, kitchen, refreshment room, workshops, depots, water treatment plant building, boiler houses, etc.) requires more attention than usual. This chapter gives a short survey of the auxiliary buildings already completed and discusses the problems of their design, location and structure. (author)

  3. Building 2000

    International Nuclear Information System (INIS)

    Den Ouden, C.; Steemers, T.C.

    1992-01-01

    This is the first volume of Building 2000, a pilot project of the Commission's R and D-programme 'Solar Energy Applications to Buildings' with the purpose of encouraging the adoption of solar architecture in large buildings. In this first rich illustrated volume the results of the design studies illustrating passive solar architecture in buildings in the European Community are presented in particular for the building categories as mentioned in the subtitle. In a second volume, a similar series of studies is presented for the building categories: office buildings, public buildings and hotels and holiday complexes. Several Design Support Workshops were organized during the Building 2000 programme during which Building 2000 design teams could directly exchange ideas with the various design advice experts represented at these workshops. In the second part of the Building 2000 final report a summary of a selection of many reports is presented (15 papers), as produced by Design Support experts. Most of the design support activities resulted in changes of the various designs, as have been reported by the design teams in the brochures presented in the first part of this book. It is to be expected that design aids and simulation tools for passive solar options, daylighting concepts, comfort criteria etc., will be utilized more frequently in the future. This will result in a better exchange of information between the actual design practitioners and the European R and D community. This technology transfer will result in buildings with a higher quality with respect to energy and environmental issues

  4. Building 2000

    Energy Technology Data Exchange (ETDEWEB)

    Den Ouden, C [EGM Engineering BV, Dordrecht (Netherlands); Steemers, T C [Commission of the European Communities, Brussels (Belgium)

    1992-01-01

    This is the first volume of Building 2000, a pilot project of the Commission's R and D-programme 'Solar Energy Applications to Buildings' with the purpose of encouraging the adoption of solar architecture in large buildings. In this first rich illustrated volume the results of the design studies illustrating passive solar architecture in buildings in the European Community are presented in particular for the building categories as mentioned in the subtitle. In a second volume, a similar series of studies is presented for the building categories: office buildings, public buildings and hotels and holiday complexes. Several Design Support Workshops were organized during the Building 2000 programme during which Building 2000 design teams could directly exchange ideas with the various design advice experts represented at these workshops. In the second part of the Building 2000 final report a summary of a selection of many reports is presented (15 papers), as produced by Design Support experts. Most of the design support activities resulted in changes of the various designs, as have been reported by the design teams in the brochures presented in the first part of this book. It is to be expected that design aids and simulation tools for passive solar options, daylighting concepts, comfort criteria etc., will be utilized more frequently in the future. This will result in a better exchange of information between the actual design practitioners and the European R and D community. This technology transfer will result in buildings with a higher quality with respect to energy and environmental issues.

  5. Building 2000

    International Nuclear Information System (INIS)

    Den Ouden, C.; Steemers, T.C.

    1992-01-01

    This is the second volume of Building 2000, a pilot project of the Commission's R and D-programme 'Solar Energy Applications to Buildings' with the purpose of encouraging the adoption of solar architecture in large buildings. In this second rich illustrated volume the results of the design studies illustrating passive solar architecture in buildings in the European Community are presented in particular for the building categories as mentioned in the subtitle. In the first volume, a similar series of studies is presented for the building categories: schools, laboratories and universities, and sports and educational centres. Several Design Support Workshops were organized during the Building 2000 programme during which Building 2000 design teams could directly exchange ideas with the various design advice experts represented at these workshops. In the second part of the Building 2000 final report a summary of a selection of many reports is presented (11 papers), as produced by Design Support experts. Most of the design support activities resulted in changes of the various designs, as have been reported by the design teams in the brochures presented in the first part of this book. It is to be expected that design aids and simulation tools for passive solar options, daylighting concepts, comfort criteria etc., will be utilized more frequently in the future. This will result in a better exchange of information between the actual design practitioners and the European R and D community. This technology transfer will result in buildings with a higher quality with respect to energy and environmental issues

  6. Building 2000

    Energy Technology Data Exchange (ETDEWEB)

    Den Ouden, C [EGM Engineering BV, Dordrecht (Netherlands); Steemers, T C [Commission of the European Communities, Brussels (Belgium)

    1992-01-01

    This is the second volume of Building 2000, a pilot project of the Commission's R and D-programme 'Solar Energy Applications to Buildings' with the purpose of encouraging the adoption of solar architecture in large buildings. In this second rich illustrated volume the results of the design studies illustrating passive solar architecture in buildings in the European Community are presented in particular for the building categories as mentioned in the subtitle. In the first volume, a similar series of studies is presented for the building categories: schools, laboratories and universities, and sports and educational centres. Several Design Support Workshops were organized during the Building 2000 programme during which Building 2000 design teams could directly exchange ideas with the various design advice experts represented at these workshops. In the second part of the Building 2000 final report a summary of a selection of many reports is presented (11 papers), as produced by Design Support experts. Most of the design support activities resulted in changes of the various designs, as have been reported by the design teams in the brochures presented in the first part of this book. It is to be expected that design aids and simulation tools for passive solar options, daylighting concepts, comfort criteria etc., will be utilized more frequently in the future. This will result in a better exchange of information between the actual design practitioners and the European R and D community. This technology transfer will result in buildings with a higher quality with respect to energy and environmental issues.

  7. Biodegradable plastics in composting. Results of a practical experiment in the Bad Duerkheim district; Einsatz von biologisch abbaubaren Kunststoffen in der Kompostwirtschaft. Erkenntnisse und Erfahrungen aus dem Praxisversuch im Landkreis Bad Duerkheim

    Energy Technology Data Exchange (ETDEWEB)

    Pabst, Klaus [Abfallwirtschaftsbetrieb Landkreis Bad Duerkheim, Bad Duerkheim (Germany)

    2012-11-01

    For collecting biomass waste, about 65,000 households in the Bad Duerkheim district were given ten bags each of the compostable BASF plastic material Ecovio {sup registered} FS. The biomass waste collected in the Ecovio {sup registered} bags were composted in a composting plant. After the compost process, no residues of the Ecovio {sup registered} bags were found in the rotting, i.e. they are completely degradable. Neither the compost quality nor the working processes in the composting plant were affected, and there was no bigger volume of sorting residues. 90% of the users stated that they were satisfied with the new biomass waste bags. (orig.) [German] Fuer die Entsorgung des Bioabfalls erhielten rund 65.000 Haushalte aus dem Landkreis Bad Duerkheim je zehn Biomuelltuten aus dem kompostierbaren BASF-Kunststoff Ecovio {sup registered} FS. Die in diesen Ecovio {sup registered} -Tueten gesammelten Bioabfaelle wurden im Biokompostwerk zu Kompost verarbeitet. Nach dem Kompostierungsprozess konnten keine Reste der Ecovio {sup registered} -Folien mehr in der Rotte gefunden werden, und sie wurden vollstaendig biologisch abgebaut. Durch den Einsatz dieser Tueten wurden weder die Kompostqualitaet noch die Arbeitsablaeufe im Biokompostwerk beeintraechtigt. Eine Erhoehung der Sortierreste war nicht festzustellen. Im Rahmen einer Kundenbefragung aeusserten sich rund 90% zufrieden mit dem Einsatz dieser Biomuelltueten. (orig.)

  8. Laboratory Building

    Energy Technology Data Exchange (ETDEWEB)

    Herrera, Joshua M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-03-01

    This report is an analysis of the means of egress and life safety requirements for the laboratory building. The building is located at Sandia National Laboratories (SNL) in Albuquerque, NM. The report includes a prescriptive-based analysis as well as a performance-based analysis. Following the analysis are appendices which contain maps of the laboratory building used throughout the analysis. The top of all the maps is assumed to be north.

  9. Building a capacity building manual

    CSIR Research Space (South Africa)

    Clinton, DD

    2010-02-01

    Full Text Available Organizations 2010 Building a capacity building manual Daniel D. Clinton, Jr., P.E., F.NSPE Chair, WFEO Capacity Building Committee Dr Andrew Cleland, FIPENZ, Chief Executive, IPENZ, NZ Eng David Botha, FSAICE, Executive Director, SAICE, SA Dawit... 2010 Tertiary level University curricula Coaches and mentors Facilities EXCeeD Remuneration of Academics Experiential training Outreach to Students Students chapters Young members forum World Federation of Engineering Organizations 2010 Post...

  10. Reactor building

    International Nuclear Information System (INIS)

    Ebata, Sakae.

    1990-01-01

    At least one valve rack is disposed in a reactor building, on which pipeways to a main closure valve, valves and bypasses of turbines are placed and contained. The valve rack is fixed to the main body of the building or to a base mat. Since the reactor building is designed as class A earthquake-proofness and for maintaining the S 1 function, the valve rack can be fixed to the building main body or to the base mat. With such a constitution, the portions for maintaining the S 1 function are concentrated to the reactor building. As a result, the dispersion of structures of earthquake-proof portion corresponding to the reference earthquake vibration S 1 can be prevented. Accordingly, the conditions for the earthquake-proof design of the turbine building and the turbine/electric generator supporting rack are defined as only the class B earthquake-proof design conditions. In view of the above, the amount of building materials can be saved and the time for construction can be shortened. (I.S.)

  11. Building sustainability

    CSIR Research Space (South Africa)

    Mass Media

    2007-11-01

    Full Text Available particu- lar social environment also being awarded. If a building can be used by the community after hours, it should be awarded extra points.” School sports facilities or meeting halls in corporate buildings, are some example. Multi-purpose use..., architect and senior researcher for the CSIR’s Built Environment Unit, the integra- tion of sustainability in building design cannot begin soon enough before it is too late. He says: “Unfortunately nothing is in place in South Africa. For a start...

  12. Building Acoustics

    Science.gov (United States)

    Cowan, James

    This chapter summarizes and explains key concepts of building acoustics. These issues include the behavior of sound waves in rooms, the most commonly used rating systems for sound and sound control in buildings, the most common noise sources found in buildings, practical noise control methods for these sources, and the specific topic of office acoustics. Common noise issues for multi-dwelling units can be derived from most of the sections of this chapter. Books can be and have been written on each of these topics, so the purpose of this chapter is to summarize this information and provide appropriate resources for further exploration of each topic.

  13. Building Data

    Data.gov (United States)

    Town of Cary, North Carolina — Explore real estate information about buildings in the Town of Cary.This file is created by the Town of Cary GIS Group. It contains data from both the Wake, Chatham...

  14. Use of riser tube rotation equipment in the Emlichheim and Landau petroleum mines of Wintershall AG Erdoelwerke; Einsatz von Steigrohrdrehvorrichtungen in den Erdoelfoerderbetrieben Emlichheim und Landau der Wintershall AG Erdoelwerke

    Energy Technology Data Exchange (ETDEWEB)

    Caspari, R. [Wintershall AG Erdoelwerke, Emlichheim (Germany)

    1998-12-31

    Riser tube rotation equipment has been in use in the Emlichheim and Landau petroleum wells since 1994 in order to ensure longer life of the riser tubes. (orig.) [Deutsch] In den von Wintershall operierten Erdoelfoerderbetrieben Emlichheim und Landau werden ca. 90% der Bohrungen mit Gestaengetiefpumpen gefoerdert. Aufgrund der lagerstaettentechnischen Gegebenheiten, der Thermalmassnahmen in Emlichheim und der Infrastruktur der Betriebe koennen andere Foerderhilfsmittel wie Tauchkreiselpumpe, Excenterschneckenpumpe oder Gasliften nur bedingt zum Einsatz kommen. Ein wesentlicher Faktor fuer den wirtschaftlichen Betrieb dieser Bohrungen sind die Aufwaeltigungen zur Beseitigung von Schaeden an der Tiefpumpe, dem Pumpgestaenge und den Steigrohren. Waehrend die Einsatzdauer der Tiefpumpen und des Pumpgestaenges durch hoeherwertige Materialguete und geeignete Optimierungsmassnahmen erhoeht werden konnten, sind die Standzeiten der Steigrohre nahezu unveraendert geblieben. Um diese zu erhoehen, werden in den Erdoelfoerderbetrieben Emlichheim und Landau seit April 1994 Steigrohrdrehvorrichtungen eingesetzt. (orig.)

  15. Modern control systems in the combined-cycle power plant `Salinenstrasse` of Stadtwerke Schwaebisch Hall GmbH; Einsatz moderner Kraftwerksleittechnik im GuD-Kraftwerk Salinenstrasse der Stadtwerke Schwaebisch Hall GmbH

    Energy Technology Data Exchange (ETDEWEB)

    Breuning, P [Stadtwerke Schwaebisch Hall GmbH (Germany); Menschel, M [Stadtwerke Schwaebisch Hall GmbH (Germany); Friedrich, G [IDS Gesellschaft fuer Informations-, Datenuebertragungs- und Steuerungssysteme mbH, Karlsruhe (Germany); Radtke, W [IDS Gesellschaft fuer Informations-, Datenuebertragungs- und Steuerungssysteme mbH, Karlsruhe (Germany)

    1994-11-14

    Run-of-river power plants, CHP systems and heating power stations produce much of the heat and power consumed in the supply area of the Stadtwerke Schwaebisch Hall. The most recent component is a modern combined-cycle power station based on a reconstructed steam power plant commissioned in 1935. Modern control systems supplied by IDS Karlsruhe ensure optimal grid and power plant operation. (orig.) [Deutsch] Laufwasser-Kraftwerke, BHKW und Heizkraftwerke decken einen grossen Teil des Bedarfs an Waerme und Energie im Versorgungsgebiet der Stadtwerke Schwaebisch Hall. Vor kurzem ist hier als weitere Komponente ein modernes GuD-Kraftwerk in Betrieb genommen worden. Um ein bestehendes, bereits 1935 erbautes Dampfkraftwerk wirtschaftlicher nutzen zu koennen, haben die Stadtwerke Schwaebisch Hall den Umbau zum GuD-Kraftwerk vorgenommen. Durch den Einsatz der von IDS Karlsruhe gelieferten Kraftwerksleittechnik, verbunden mit einem modernen Netzleitsystem wird eine optimale Netz- und Kraftwerksfuehrung ermoeglicht. (orig.)

  16. Use of TVO sensors for level monitoring in mixed liquid helium container; Einsatz von TVO-Sensoren zur Fuellstandsueberwachung im durchmischten Fluessigheliumbehaelter

    Energy Technology Data Exchange (ETDEWEB)

    Richter, T.; Hollik, M.; Lietzow, R. [Karlsruher Institut fuer Technologie (KIT), Eggenstein-Leopoldshafen (Germany). Inst. fuer Technische Physik

    2015-07-01

    befindet sich eine Rohrwendel durch welche der Heliumvorlauf (4 bar und 5,5 K) zur Kuehlung der kalten Kontakte auf Badtemperatur (4,5 K) abgekuehlt wird. Waehrend des normalen Betriebs findet in diesen Behaelter eine kontinuierliche Verfluessigung statt. Der Fuellstand wird mittels einer supraleitenden Fuellstandssonde gemessen und durch einen Heizer ueber eine entsprechende Heizlast geregelt. Diese Vorgaenge fuehren zu einer staendigen Durchmischung und damit homogenen Temperaturverteilung im gesamten Behaelter. Zur Absicherung einer Stoerung der Fuellstandsonde oder des Heizers wurden ein unterer (Behaelter leer) und ein oberer (Behaelter ueberfuellt) Abschaltpunkt vorgesehen. Dafuer finden TVO-Sensoren Verwendung, die als Endschalter fuer den Automatikbetrieb des Heliumunterkuehlers fungieren. Das vorliegende Papier stellt den detaillierten Aufbau sowie die aufgetretenen Huerden bei der Verwendung dieses Ansatzes in der Anlage CuLTKa dar. Es werden die Gruende dafuer beleuchtet und die gefolgten Modifikationen erlaeutert, wodurch ein Einsatz von TVO-Sensoren zu dem genannten Zweck in CuLTKa moeglich gemacht wurde. Dabei werden ganzheitlich sowohl die mechanischen als auch messtechnischen Aspekte beschrieben.

  17. Competence Building

    DEFF Research Database (Denmark)

    Borrás, Susana; Edquist, Charles

    The main question that guides this paper is how governments are focusing (and must focus) on competence building (education and training) when designing and implementing innovation policies. With this approach, the paper aims at filling the gap between the existing literature on competences...... on the one hand, and the real world of innovation policy-making on the other, typically not speaking to each other. With this purpose in mind, this paper discusses the role of competences and competence-building in the innovation process from a perspective of innovation systems; it examines how governments...... and public agencies in different countries and different times have actually approached the issue of building, maintaining and using competences in their innovation systems; it examines what are the critical and most important issues at stake from the point of view of innovation policy, looking particularly...

  18. Building Procurement

    DEFF Research Database (Denmark)

    Andersson, Niclas

    2007-01-01

    evolves from a simple establishment of a contractual relationship to a central and strategic part of construction. The authors relate to cultural, ethical and social and behavioural sciences as the fundamental basis for analysis and understanding of the complexity and dynamics of the procurement system......‘The procurement of construction work is complex, and a successful outcome frequently elusive’. With this opening phrase of the book, the authors take on the challenging job of explaining the complexity of building procurement. Even though building procurement systems are, and will remain, complex...... despite this excellent book, the knowledge, expertise, well-articulated argument and collection of recent research efforts that are provided by the three authors will help to make project success less elusive. The book constitutes a thorough and comprehensive investigation of building procurement, which...

  19. Nanocomposites transparentes multifuncionales de hidróxido doble laminares

    OpenAIRE

    Fernández Vilaber, Antonio

    2017-01-01

    Este trabajo trata sobre obtener una serie de materiales nanocompuestos en forma de película para usarlos como plásticos de invernadero. Para ello se sintetizarán hidróxidos dobles laminares modificados con un agente blanqueante óptico que mejorará las propiedades ópticas del material Escuela Técnica Superior de Ingeniería Industrial Universidad Politécnica de Cartagena

  20. Existing buildings

    DEFF Research Database (Denmark)

    Gram-Hanssen, Kirsten

    2014-01-01

    their homes. These policy measures include building regulations, energy tax and different types of incentives and information dissemination. The conclusion calls for new and innovative policy measures to cope with the realities of renovations of owner-occupied houses and how energy efficiency improvement...

  1. Building Sandcastles

    DEFF Research Database (Denmark)

    Jensen, Steffen Moltrup Ernø; Korsgaard, Steffen; Shumar, Wes

    of entrepreneurship education. Our theoretical and methodological approach builds on Actor-Network Theory. The empirical settings of our study consist of two entrepreneurship courses which differ in terms of temporal extension and physical setting. Data is collected using observation and interview techniques. Our...

  2. Sustainable Buildings

    DEFF Research Database (Denmark)

    Tommerup, Henrik M.; Elle, Morten

    The scientific community agrees that: all countries must drastically and rapidly reduce their CO2 emissions and that energy efficient houses play a decisive role in this. The general attitude at the workshop on Sustainable Buildings was that we face large and serious climate change problems...

  3. Building Bridges

    DEFF Research Database (Denmark)

    The report Building Bridges adresses the questions why, how and for whom academic audience research has public value, from the different points of view of the four working groups in the COST Action IS0906 Transforming Audiences, Transforming Societies – “New Media Genres, Media Literacy and Trust...... in the Media”, “Audience Interactivity and Participation”, “The Role of Media and ICT Use for Evolving Social Relationships” and “Audience Transformations and Social Integration”. Building Bridges is the result of an ongoing dialogue between the Action and non-academic stakeholders in the field of audience......, Brian O’Neill, Andra Siibak, Sascha Trültzsch-Wijnen, Nicoletta Vittadini, Igor Vobič and Frauke Zeller. Stakeholder feedback from: Michelle Arlotta (DeAgostini), Andreea M. Costache (Association of Consumers of Audiovisual Media in Catalonia/TAC), Francesco Diasio (AMARC Europe), Marius Dragomir (Open...

  4. Building economics

    DEFF Research Database (Denmark)

    Pedersen, D.O.(red.)

    Publikationen er på engelsk. Den omfatter alle indlæg på det fjerde internationale symposium om byggeøkonomi, der blev arrangeret af SBI for det internationale byggeforskningsråd CIB. De fem bind omhandler: Methods of Economic Evaluation, Design Optimization, Ressource Utilization, The Building...... Market og Economics and Technological Forecasting in Construction. Et indledende bind bringer statusrapporter for de fem forskningsområder, og det sidste bind sammenfatter debatten på symposiet....

  5. Use of an air collector plant for a municipal water house in South Africa; Einsatz einer Luftkollektoranlage fuer ein kommunales Wasserhaus in Suedafrika

    Energy Technology Data Exchange (ETDEWEB)

    Schroepf, Siegfried; Ettl, Rudolf [Grammer Solar GmbH, Amberg (Germany)

    2010-07-01

    A very interesting example of application for solar heating of industrial water and drinking water is the 'Water building project' in Jansenville (South Africa). There, the solarly heated water not only serves for having a shower, but also for washing clothes. The washing performance is increased by warm water. Thus less water is consumed. A major task of the project was to develop a completely self-sufficient and low-maintenance solar air-conditioning which easily and effectively covers the hot water requirement of a building with a high solar fraction. Additionally, the solar heating system supports the building with heat and air during the winter months.

  6. Sustainable building versus ecological building

    CSIR Research Space (South Africa)

    Van Wyk, Llewellyn V

    2010-04-01

    Full Text Available and sensitivity to a site that are required to efficiently meet the energy needs of a building and occupants with renewable energy (solar, wind, geothermal, etc), designers must apply holistic design principles and take advantage of the free, naturally... monumental waste: the product which they deliver requires resources such as energy and water to operate over its entire life-cycle, a period measured in decades, and often in centuries. Throughout this process, construction activities often result...

  7. Model building

    International Nuclear Information System (INIS)

    Frampton, Paul H.

    1998-01-01

    In this talk I begin with some general discussion of model building in particle theory, emphasizing the need for motivation and testability. Three illustrative examples are then described. The first is the Left-Right model which provides an explanation for the chirality of quarks and leptons. The second is the 331-model which offers a first step to understanding the three generations of quarks and leptons. Third and last is the SU(15) model which can accommodate the light leptoquarks possibly seen at HERA

  8. Model building

    International Nuclear Information System (INIS)

    Frampton, P.H.

    1998-01-01

    In this talk I begin with some general discussion of model building in particle theory, emphasizing the need for motivation and testability. Three illustrative examples are then described. The first is the Left-Right model which provides an explanation for the chirality of quarks and leptons. The second is the 331-model which offers a first step to understanding the three generations of quarks and leptons. Third and last is the SU(15) model which can accommodate the light leptoquarks possibly seen at HERA. copyright 1998 American Institute of Physics

  9. Energy management through building automation. Fundamentals - Technologies - Applications; Energiemanagement durch Gebaeudeautomation. Grundlagen - Technologien - Anwendungen

    Energy Technology Data Exchange (ETDEWEB)

    Aschendorf, Bernd [Fachhochschule Dortmund (Germany). Fachbereich Informations- und Elektrotechnik

    2014-02-01

    The books available in the market consider only the use of individual buildings bus systems, but not to compare with each other with respect to cost-benefit and applicability. In this book, a total of 40 different systems, such as radio bus systems, PEHA-PHC, EIB, LCN, LON, PLC systems, investigated for their possible use in the various categories of buildings. The comparison refers to all levels of the automation pyramid from fieldbus, to automation to the control level and considers in particular the usability for SmartMetering-based energy management. [German] Die am Markt vorhandenen Buecher betrachten lediglich den Einsatz einzelner Gebaeudebussysteme, nicht jedoch den Vergleich untereinander mit Bezug auf Kosten/Nutzen und Anwendbarkeit. In diesem Buch werden insgesamt 40 verschiedene Systeme, wie z.B. Funkbussysteme, PEHA-PHC, EIB-, LCN-, LON-, SPS-Systeme, auf deren Einsatzmoeglichkeit in den verschiedenen Gebaeudekategorien untersucht. Der Vergleich bezieht sich auf alle Ebenen der Automatisierungspyramide vom Feldbus ueber die Automatisierung bis zur Leitebene und betrachtet insbesondere auch die Verwendbarkeit fuer smartMetering-basiertes Energiemanagement.

  10. E-Portfolios, ‹eine Möglichkeit, viel für sich selbst zu lernen›. Der Einsatz von E-Portfolios als Reflexionsinstrument am Beispiel der Viadrina PeerTutoring-Ausbildung

    Directory of Open Access Journals (Sweden)

    Stefanie Vogler-Lipp

    2017-03-01

    Full Text Available Das Reflektieren und Verstehen des eigenen Lernprozesses gehört zu den studienrelevanten Fertigkeiten, die erlernt und während eines erfolgreichen Studiums vertieft werden sollten. Seit 2012 wird im Rahmen der Viadrina PeerTutoring-Ausbildung an der Europa-Universität Viadrina auf den Ausbau und die Weiterentwicklung der Reflexionskompetenzen sehr viel Wert gelegt. Im Folgenden werden die theoretischen Grundlagen zusammengefasst und erläutert, wie gutes Reflektieren angeleitet wird. Die Studierenden reflektieren ihre Lernprozesse in E-Portfolios. Um das komplexe Zusammenspiel einer guten Anleitung zum Reflektieren, den tatsächlichen Ergebnissen in den E-Portfolios und den Eindrücken der Mitarbeiter/innen am Zentrum für Schlüsselkompetenzen und Forschendes Lernen nachvollziehen zu können, werden am Ende einzelne Auszüge aus den E-Portfolios vorgestellt und für den Einsatz von E-Portfolio als Reflexionsinstrument plädiert.

  11. Reactor building

    International Nuclear Information System (INIS)

    Maruyama, Toru; Murata, Ritsuko.

    1996-01-01

    In the present invention, a spent fuel storage pool of a BWR type reactor is formed at an upper portion and enlarged in the size to effectively utilize the space of the building. Namely, a reactor chamber enhouses reactor facilities including a reactor pressure vessel and a reactor container, and further, a spent fuel storage pool is formed thereabove. A second spent fuel storage pool is formed above the auxiliary reactor chamber at the periphery of the reactor chamber. The spent fuel storage pool and the second spent fuel storage pool are disposed in adjacent with each other. A wall between both of them is formed vertically movable. With such a constitution, the storage amount for spent fuels is increased thereby enabling to store the entire spent fuels generated during operation period of the plant. Further, since requirement of the storage for the spent fuels is increased stepwisely during periodical exchange operation, it can be used for other usage during the period when the enlarged portion is not used. (I.S.)

  12. Building America

    Energy Technology Data Exchange (ETDEWEB)

    Brad Oberg

    2010-12-31

    Builders generally use a 'spec and purchase' business management system (BMS) when implementing energy efficiency. A BMS is the overall operational and organizational systems and strategies that a builder uses to set up and run its company. This type of BMS treats building performance as a simple technology swap (e.g. a tank water heater to a tankless water heater) and typically compartmentalizes energy efficiency within one or two groups in the organization (e.g. purchasing and construction). While certain tools, such as details, checklists, and scopes of work, can assist builders in managing the quality of the construction of higher performance homes, they do nothing to address the underlying operational strategies and issues related to change management that builders face when they make high performance homes a core part of their mission. To achieve the systems integration necessary for attaining 40% + levels of energy efficiency, while capturing the cost tradeoffs, builders must use a 'systems approach' BMS, rather than a 'spec and purchase' BMS. The following attributes are inherent in a systems approach BMS; they are also generally seen in quality management systems (QMS), such as the National Housing Quality Certification program: Cultural and corporate alignment, Clear intent for quality and performance, Increased collaboration across internal and external teams, Better communication practices and systems, Disciplined approach to quality control, Measurement and verification of performance, Continuous feedback and improvement, and Whole house integrated design and specification.

  13. Building energy analysis tool

    Science.gov (United States)

    Brackney, Larry; Parker, Andrew; Long, Nicholas; Metzger, Ian; Dean, Jesse; Lisell, Lars

    2016-04-12

    A building energy analysis system includes a building component library configured to store a plurality of building components, a modeling tool configured to access the building component library and create a building model of a building under analysis using building spatial data and using selected building components of the plurality of building components stored in the building component library, a building analysis engine configured to operate the building model and generate a baseline energy model of the building under analysis and further configured to apply one or more energy conservation measures to the baseline energy model in order to generate one or more corresponding optimized energy models, and a recommendation tool configured to assess the one or more optimized energy models against the baseline energy model and generate recommendations for substitute building components or modifications.

  14. Building trust

    International Nuclear Information System (INIS)

    Lewis, Meriel

    1995-01-01

    'Activate' is the energy magazine for secondary schools and is part of the Education Programme which is managed on behalf of the British Nuclear Industry Forum by AEA Technology. activate is the flagship communication device between the British Nuclear Industry Forum's Education Programme and secondary schools in the UK. It was developed from a previous publication, Nuclear Bulletin. There is a need for the nuclear industry to build trust with teachers and students in the UK, where for a long time, everything that the industry has said, written or printed has been disregarded by school teachers as propaganda. Over the last few years the industry has put in a great deal of effort to position itself as a provider of educationally sound and socially acceptable information. 'Activate' was an evolution of this idea and there was a hole in the market for a lively, activity and article based magazine that could be used in the classroom. The target audience is principally teachers of science, mathematics and geography, but also includes teachers of art,, English and history with students of between 11 and 18. The results were very positive in that teachers appreciated the colourful and lively nature of activate and they felt that it provided information and opinions in an un biased and non-propagandist way. Their comments about layout, number of activities style of presentation were taken into account and during the summer of 1994 activate was remodelled ready for re launch in September. The feedback so far is good with more teachers signing up every week to receive their own free copy

  15. Building integrated photovoltaics

    NARCIS (Netherlands)

    Ritzen, M.J.; Vroon, Z.A.E.P.; Geurts, C.P.W.; Reinders, Angèle; Verlinden, Pierre; Sark, Wilfried; Freundlich, Alexandre

    2017-01-01

    Photovoltaic (PV) installations can be realized in different situations and on different scales, such as at a building level. PV installations at the building level can either be added to the building envelope, which is called building added PV (BAPV), or they can be integrated into the building

  16. Building performance simulation for sustainable buildings

    NARCIS (Netherlands)

    Hensen, J.L.M.

    2010-01-01

    This paper aims to provide a general view of the background and current state of building performance simulation, which has the potential to deliver, directly or indirectly, substantial benefits to building stakeholders and to the environment. However the building simulation community faces many

  17. Tribal Green Building Toolkit

    Science.gov (United States)

    This Tribal Green Building Toolkit (Toolkit) is designed to help tribal officials, community members, planners, developers, and architects develop and adopt building codes to support green building practices. Anyone can use this toolkit!

  18. BUILDING 341 Seismic Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Halle, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-06-15

    The Seismic Evaluation of Building 341 located at Lawrence Livermore National Laboratory in Livermore, California has been completed. The subject building consists of a main building, Increment 1, and two smaller additions; Increments 2 and 3.

  19. Danish building typologies and building stock analyses

    DEFF Research Database (Denmark)

    Wittchen, Kim Bjarne; Kragh, Jesper

    energy savings in residential buildings. The intension with this analysis was to investigate the possible energy reduction in Denmark if the same approach had been taken for the entire Danish building stock. The report concludes that the ZeroHome initiative clearly results in energy savings, but far from...... enough to meet the government’s plan to make Danish buildings free from use of fossil fuels by 2035. This will probably require around 50 % energy savings in the Danish building stock as a whole. However, the project has proven that dedicated engagement of locals can speed up market penetration...... for energy savings in the existing Building stock....

  20. Danish building typologies

    DEFF Research Database (Denmark)

    Wittchen, Kim Bjarne; Kragh, Jesper

    The objective of TABULA is to develop a harmonised building typology for European countries. Each national building typology will consist of a set of residential model buildings with characteristic energy-related properties (element areas of the thermal building envelope, U-values, supply system...... efficiencies). The model buildings will each represent a specific construction period of the country in question and a specific building size. Furthermore the number of buildings, flats and the overall floor areas will be given, which are represented by the different building types of the national typologies....

  1. Experiences with the use of conservative tracers as an aid in transferring lysimeter results to the open field; Erfahrungen beim Einsatz von konservativen Tracern als Hilfsmittel zur Uebertragung von Lysimeterergebnissen auf Freilandflaechen

    Energy Technology Data Exchange (ETDEWEB)

    Seeger, J.; Meissner, R.; Rupp, H. [UFZ - Umweltforschungszentrum Leipzig-Halle GmbH, Falkenberg (Germany). Lysimeterstation; Mueller, L.; Eulenstein, F. [Zentrum fuer Agrarlandschafts- und Landnutzungsforschung e.V. (ZALF), Muencheberg (Germany)

    1999-02-01

    Four lysimeter trials performed on an IS-type soil yielded an almost constant range of displacement of a tracer front (NO{sub 3} front) of 4.0 to 4.5 mm / l of seepage water (referred to a surface area of 1 m-2 and a depth of 1 m). This was experimental confirmation of a tentatively formulated simplified relationship between seepage water volume, vertical tracer displacement, and field capacity. The results were also in very good agreement with those of a control study in the open field carried out under similar hydrological, pedological, and agrotechnical conditions using lysimeters and Cl tracers for determining quantities of seepage water formation. As the present lysimeter trials mirror soil hydrological processes in the open field with sufficient accuracy, they appear well suited to take the place of the so often lacking territorial data as a means of validating mathematical models describing seepage-water-bound material export. [Deutsch] Auf der Basis von 4 Lysimeterversuchen konnte fuer die Bodenart IS ein nahezu konstanter Wertebereich fuer die Verlagerung einer Tracerfront (NO{sub 3}-Front) in Hoehe von 4,0 bis 4,5 mm/l Sickerwasser (bezogen auf eine Oberflaeche von 1 m{sup 2} und eine Tiefe von 1 m) ermittelt werden. Damit konnte die vereinfachte Beziehung zwischen Sickerwassermenge, Tracerverlagerungstiefe und Feldkapazitaet experimentell bestaetigt werden. Ein Vergleich zur Bestimmung der Sickerwassermengenbildung mit Hilfe von Lysimetern und durch Einsatz von Cl-Tracern unter aehnlich hydrologischen, pedologischen und agrotechnischen Bedingungen im Freiland wies eine hohe Uebereinstimmung auf. Da die hier durchgefuehrten Lysimeteruntersuchungen bodenhydrologische Prozesse von Freilandflaechen mit ausreichender Genauigkeit widerspieglen, erscheinen sie anstelle oft fehlender Gebietskenndaten zur Validierung von mathematischen Modellen zur Beschreibung sickerwassergebundener Stoffaustraege gut geeignet. (orig.)

  2. Application of laser-optical diagnostics for the support of direct-injection gasoline combustion process development; Einsatz laseroptischer Messverfahren zur Unterstuetzung der Entwicklung von Brennverfahren mit Benzin-Direkteinspritzung

    Energy Technology Data Exchange (ETDEWEB)

    Hentschel, W.; Meyer, H.; Stiebels, B. [Volkswagenwerk AG, Wolfsburg (Germany). Abt. Forschung und Entwicklung

    2000-07-01

    The development of direct-injection gasoline engines at Volkswagen was supported strictly from the beginning by the means of optical diagnostics and CFD-simulations. Basic phenomena, such as the formation of the in-cylinder flow field, the penetration of the spray formed by a hollow-cone swirl-type injector at high fuel pressure, the interaction of spray and flow and the formation of an ignitable mixture were analysed in details. The paper describes the laser-optical techniques-particle-image-velocimetry, laser-Doppler-anemometry, videostroboscopy, high-speed cinematography and laser-induced fluorescence - which were used during the development of the DI gasoline combustion process. Examples taken from engines with optical access to the combustion chamber demonstrate the capability of the techniques and pinpoint where the design of the combustion process benefits from experimental and simulation investigations. (orig.) [German] Die Entwicklung von Ottomotoren mit Benzin-Direkteinspritzung wurde bei Volkswagen von Beginn an konsequent durch den Einsatz optischer Messverfahren und CFD-Simulationen unterstuetzt. Damit konnten grundlegende Phaenomene, wie die Ausbildung des Stroemungsfeldes im Motorbrennraum, die Ausbreitung des durch einen Hohlkegel-Drallinjektor unter hohem Druck eingespritzten Kraftstoffs sowie die Wechselwirkung der Luftstroemung im Zylinder mit den Einspritzstrahlen und die Bildung einer zuendfaehigen Ladungswolke detailliert untersucht werden. Das Paper beschreibt die laseroptischen Messverfahren - Particle-Image-Velocimetry, Laser-Doppler-Anemometry, Video-Stroboskopie, Hochgeschwindikgkeits-Kinematographie und Laserinduzierte Fluoreszenz - die bei der Brennverfahrensentwicklung eingesetzt werden und zeigt anhand einer Reihe von konkreten Beispielen, wo Antworten auf Grundsatzfragen zur Auslegung des Brennverfahrens durch Messergebnisse an optisch zugaenglichen Motoren und durch CFD-Simulationen erarbeitet werden koennen. (orig.)

  3. Modern frame structure buildings

    Directory of Open Access Journals (Sweden)

    В. М. Першаков

    2013-07-01

    Full Text Available The article deals with the design, construction and implementation of reinforced concrete frame structures with span 18, 21 m for agricultural production buildings, hall-premises of public buildings and buildings of agricultural aviation. Structures are prefabricated frame buildings and have such advantages as large space inside the structure and lower cost compared with other facilities with same purpose

  4. Retrofitting Listed Buildings

    DEFF Research Database (Denmark)

    Rasmussen, Torben Valdbjørn

    2011-01-01

    The paper presents a case study where the energy demand for a listed building constructed in 1900 is reduced. Many older buildings are listed and have restrictions that include the entire building or that include only its exterior. For the building presented, only its exterior facade is listed. T...

  5. Measurement in Sustainable Building

    DEFF Research Database (Denmark)

    Hale, Lara

    2018-01-01

    Measurement is a necessary aspect of planning and constructing buildings. However, recent attempts to integrate the social dimension of sustainable building into building design and specifications demand measurement of non-technical qualities, such as well-being. The Active House Alliance, in lieu...... and continued provision of sustainable buildings to market demand....

  6. ICT Enhanced Buildings Potentials

    DEFF Research Database (Denmark)

    Christiansson, Per

    2007-01-01

    component systems that are accessed and integrated in the real world of building use in different contexts. The ICT systems may be physically or virtually embedded in the building. Already in 1982 AT&T established the 'intelligent buildings', IB, concept due to marketing reasons and the Informart building...... with focus on virtual building models support, new services and user environment definitions and development, virtual spaces and augmented reality, intelligent building components, application ontologies, and ICT systems integration to illustrate ICT enhanced buildings potentials and R&D needs.  ...

  7. Global building physics

    DEFF Research Database (Denmark)

    Rode, Carsten

    2013-01-01

    High ambitions are set for the building physics performance of buildings today. No single technology can achieve fulfilment of these ambitions alone. Integrated, multi-facetted solutions and optimization are necessary. A holistic, or ‘global’, technological perspective is needed, which includes all...... aspects of the building as defined in building engineering. We live in an international society and building solutions are developed across country borders. Building physics is a global theme. The International Association of Building Physics has global appeal. This brief article reports the keynote...

  8. Global Building Physics

    DEFF Research Database (Denmark)

    Rode, Carsten

    2012-01-01

    High ambitions are set for the building physics performance of buildings today. No single technology can achieve fulfilment of these ambitions alone. Integrated, multi-facetted solutions and optimization are necessary. A holistic, or “global”, technological perspective is needed, which includes all...... aspects of the building as defined in building engineering. We live in an international society and building solutions are developed across country borders. Building physics is a global theme. The International Association of Building Physics has global appeal. The keynote lecture and this brief paper...

  9. Sustainable Buildings in Interaction

    DEFF Research Database (Denmark)

    Elle, Morten

    2007-01-01

    The first attempts to build sustainable buildings in Denmark were typically located on the countryside. The basic idea was to create buildings that were independent of the technical infrastructure. District heating has, however, been the dominating solution to heating in buildings in Denmark......, and the focus on sustainable building have gradually turned from special houses on the countryside to normally looking houses in the urban fabric, integrated in the technical infrastructure. Some new built urban areas in Denmark will, however, not have to be supplied with district heating – these developments...... are going to consist of passive houses. The first sustainable buildings were built by their users, and the user – building interaction still play a decisive role for the performance of the present sustainable buildings. The users have to understand how the building functions. Urban design is essential...

  10. Integrating Responsive Building Elements in Buildings

    DEFF Research Database (Denmark)

    Haase, Matthias; Amato, Alex; Heiselberg, Per

    2006-01-01

    energy strategies to develop guidelines and procedures for estimation of environmental performance of responsive building elements and integrated building concepts This paper introduces the ideas of this collaborative work and discusses its usefulness for Hong Kong and China. Special focus was put...

  11. Challenges in Commercial Buildings | Buildings | NREL

    Science.gov (United States)

    systems Assessing the energy and economic impacts of various technologies, giving priority to those that standardized language for commercial building energy audit data that can be used by software developers to exchange data between audit tools, and can be required by building owners and audit program managers to

  12. Bellanca building, Yellowknife : building envelope retrofit project

    Energy Technology Data Exchange (ETDEWEB)

    Rajewski, G. [A.D. Williams Engineering Inc., Edmonton, AB (Canada)

    2008-07-01

    The Bellanca building is a ten-story, commercial office building, located in Yellowknife, Northwest Territories. The owner was concerned about annual fuel consumption, relative to other buildings of similar size. Tenants reported cold drafts and some ice build-up had been reported in the past, on the exterior of the cladding. In addition, some water penetration had occurred during rainfall. This presentation provided background information on the Bellanca building and discussed a building envelope retrofit project. A.D. Williams was hired in late 2006 in order to provide an opinion on the present condition of the building envelope. This presentation described the site investigation and presented an interior and exterior review of the building. It also presented a thermographic survey in order to map thermal anomalies and establish trends. Following acceptance of the report on findings, one of five options was selected for further development. This included removal of existing cladding, exterior gypsum wallboard, fiberglass insulation and application of BASF Walltite CT foam, sheathing, rigid insulation, drainage plane and new cladding. The preliminary design was then presented. This paper also described the tender and award of the contract; construction phase; and substantial completion of the project. tabs, figs.

  13. Applied building physics

    CERN Document Server

    Hens, Hugo S L C

    2012-01-01

    The energy crises of the 1970s, persisting moisture problems, complaints about sick buildings, thermal, visual and olfactory discomfort, and the move towards more sustainability in building construction have pushed Building Physics to the forefront of building innovation. The societal pressure to diminish energy consumption in buildings without impairing usability acted as a trigger to activate the whole notion of performance based design and construction. As with all engineering sciences, Building Physics is oriented towards application, which is why, after a first book on fundamentals this s

  14. Vergleich vom Einsatz Standardisierter Patienten mit Computerfällen in der Psychiatrie und Psychotherapie [Training with standardized patients versus computerized case simulations in psychiatry and psychotherapy: a comparison

    Directory of Open Access Journals (Sweden)

    Mathiak, Klaus

    2010-02-01

    Full Text Available [english] Aims: In this randomized comparative study, we obtained student evaluations for training with standardized patients as well as for computerized case simulations and correlated them with the student’s learning type. Training with standardized patients was also reviewed regarding acceptance.Methods: Medical students in the 5th clinical semester (N = 222 participated in a course with standardized patients (n = 99 or in computerized case simulations (n = 123. Following the course, the students completed a questionnaire including items concerning the methodology and didactics of both courses.Results: Training with standardized patients was evaluated as superior by the students. There was no correlation with the student’s learning type. Conclusions: The results show that it is possible to compare different methods of instruction in a controlled study. Both teaching methods provide the opportunity to practice clinical skills. Particularly in a neuropsychiatric setting, training with standardized patients can complement other methods as a means of developing communication skills.[german] Zielsetzung: Im Rahmen der vorliegenden Studie wurde der Einsatz von Standardisierten Patienten mit computerbasierten Falldemonstrationen in der psychiatrischen Lehre verglichen und die Bewertungen in Relation zu den Lernstilen der Studierenden gestellt. Darüber hinaus sollte die Akzeptanz von Standardisierten Patienten als innovative Lehrform überprüft werden.Methodik: Studierende des Regelstudiengangs Medizin im 5. klinischen Semester (N=222 nahmen entweder an einem Seminar mit Standardisierten Patienten (N=99 oder an einem Seminar mit computerbasierten Falldemonstrationen (N=123 teil. Im Anschluss an den Unterricht füllten die Studierenden einen Evaluationsbogen aus, welcher Fragen zur Bewertung der Methodik und der Didaktik beider Unterrichtsformen enthielt.Ergebnisse: Die Studenten gaben dem Fallunterricht mit Standardisierten Patienten in

  15. Oil as a design parameter in screw-type engines - use of non-newtonian oils. Pt. 1; Oel als Konstruktionselement in Schraubenmaschinen - Einsatz nicht newtonscher Oele. T. 1

    Energy Technology Data Exchange (ETDEWEB)

    Kauder, K.; Deipenwisch, R. [Dortmund Univ. (Germany). FG Fluidenergiemaschinen

    1998-12-31

    The model of the calculation of the friction losses caused by oil described in this report delivers a starting point for the integration of the design parameter `oil` for oil injected screw-type engines. The use of non newtonian oils with a shear thinning behaviour lead to a decrease of energy consumption over a broad speed range of screw-type compressors. The decrease is mainly caused by the shear indicated lower viscosity in the clearances of the compressor. A difficulty through the use of this oils is the estimation of the conditions in the clearances. The rate of shear in the single clearance is influenced by the relative speed of the boundaries and by the height of the clearance during operation. Up to now only cold heights were used in the model. To improve the quality of the model the clearances of a running screw compressor were measured. The losses which were determined at the screw compressor test plant are the summation of all losses including the losses caused by the power transmission and in the bearings. Experiments at a model rotor test stand make the determination of the friction losses and the losses by the acceleration of the oil in the clearances possible. A better calculation model shall deliver the conditions to describe the influence of the oil on the energy efficiency and to define the optimal oil for every screw compressor. (orig.) [Deutsch] Das beschriebene Modell zur Berechnung der hydraulischen Verluste in der nasslaufenden Schraubenmaschine liefert Ansaetze, um das Oel schon bei der Auslegung der Schraubenkompressoren als Konstruktionselement mit einzubeziehen. Sinnvoll ist die Nutzung eines nicht-newtonschen Oeles immer dann, wenn eine deutliche scherindizierte Viskositaetserniedrigung in dem Schergeschwindigkeitsbereich, der in den Spalten des Schraubenkompressors vorliegt, erreicht werden kann. Beim Einsatz dieser Oele besteht die Schwierigkeit darin, den Schergeschwindigkeitsbereich vorherzubestimmen, der waehrend des Betriebs in dem

  16. Requirements for existing buildings

    DEFF Research Database (Denmark)

    Thomsen, Kirsten Engelund; Wittchen, Kim Bjarne

    This report collects energy performance requirements for existing buildings in European member states by June 2012.......This report collects energy performance requirements for existing buildings in European member states by June 2012....

  17. Green Building Standards

    Science.gov (United States)

    Many organizations have developed model codes or rating systems that communities may use to develop green building programs or revise building ordinances. Some of the major options are listed on this page.

  18. Introduction: Green Building Handbook

    CSIR Research Space (South Africa)

    Van Wyk, Llewellyn V

    2010-08-01

    Full Text Available By recognising the specific environmental challenges facing South Africa, mindful of the government‘s commitment to reducing South Africa‘s Greenhouse gas emissions, and acknowledging the need to build social cohesion, the Green Building Handbook...

  19. Integrated Building Health Management

    Data.gov (United States)

    National Aeronautics and Space Administration — Abstract: Building health management is an important part in running an efficient and cost-effective building. Many problems in a building’s system can go undetected...

  20. Building the Korogwe Laboratory

    DEFF Research Database (Denmark)

    Knudsen, Jakob; von Seidlein, Lorenz; Richard, Jean Pierre

    2011-01-01

    An illustrated description of the building of a biomedical research laboratory in Korogwe, Tanzania.......An illustrated description of the building of a biomedical research laboratory in Korogwe, Tanzania....

  1. Sustainable Building Operation

    DEFF Research Database (Denmark)

    Jensen, Jesper Ole

    2009-01-01

    of sustainable building operation and a survey amongst building administrators from the private and the social housing sector. Our results show that there are many good examples on sustainable building operation in Danish housing estates, where local building managers, residents etc. have gained impressive......Energy-savings in the existing building stock have becomes a main goal in national and international policies. Often focus is on building-renovations, whereas the potential of sustainable building operation to a large extent has been neglected. Nevertheless, international research as well...... as practical experiences from Danish housing estates indicates that there are large potentials for energy savings by focusing on the operation of the buildings. We suggest that in order to achieve sustainability in the existing housing, renovation and operations should be seen as integrated parts...

  2. Robotic buildings(s)

    NARCIS (Netherlands)

    Bier, H.H.

    2014-01-01

    Technological and conceptual advances in fields such as artificial intelligence, robotics, and material science have enabled robotic building to be in the last decade prototypically implemented. In this context, robotic building implies both physically built robotic environments and robotically

  3. Environmental indicators for buildings

    DEFF Research Database (Denmark)

    Dammann, Sven

    Environmental Indicators for Buildings are studied using two different perspectives: with a technological, environmental scientific departing point and with a social scientific departing point. Different relevant groups in the building sector are identified and analysed, using the Social...

  4. Building Design & Construction - Sustainability

    Energy Technology Data Exchange (ETDEWEB)

    None

    2003-11-01

    Offers a brief history of green building; presents the results of a specially commissioned survey; and analyzes the chief trends, issues, and published research, based on interviews with dozens of experts and participants in green building.

  5. Buildings interoperability landscape - Draft

    Energy Technology Data Exchange (ETDEWEB)

    Hardin, Dave B. [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); Stephan, Eric G. [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); Wang, Weimin [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); Corbin, Charles D. [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States); Widergren, Steven E. [Pacific Northwest National Laboratory (PNNL), Richland, WA (United States)

    2015-02-01

    Buildings are an integral part of our nation’s energy economy. The advancement in information and communications technology (ICT) has revolutionized energy management in industrial facilities and large commercial buildings. As ICT costs decrease and capabilities increase, buildings automation and energy management features are transforming the small-medium commercial and residential buildings sectors. A vision of a connected world in which equipment and systems within buildings coordinate with each other to efficiently meet their owners’ and occupants’ needs, and where buildings regularly transact business with other buildings and service providers (such as gas and electric service providers) is emerging. However, while the technology to support this collaboration has been demonstrated at various degrees of maturity, the integration frameworks and ecosystems of products that support the ability to easily install, maintain, and evolve building systems and their equipment components are struggling to nurture the fledging business propositions of their proponents.

  6. Building 431 fire tests

    International Nuclear Information System (INIS)

    Alvares, N.J.; Beason, D.G.; Ford, H.W.; Magee, M.W.

    1977-01-01

    An extensive discussion of considerations for fire protection in the LLL mirror fusion test facility (MFTF) is presented. Because of the large volume and high bays of the building, sufficient data on fire detection is unavailable. Results of fire detection tests using controlled fire sources in the building are presented. Extensive data concerning the behavior of the building atmosphere are included. Candidate fire detection instrumentation and extinguishing systems for use in the building are briefly reviewed

  7. Dutch Building Decree

    NARCIS (Netherlands)

    Scholten, N.P.M.

    2000-01-01

    On the 1 October 1992 a change in the Dutch building legislation took effect: the revised Housing Act, the Building Decree and the technical documents related to this legislation came into force. This publication contains an English translation of the Building Decree. In order to give an idea of the

  8. Building founding method

    International Nuclear Information System (INIS)

    Tateno, Seiya; Hirako, Shizuka.

    1996-01-01

    The lower portion of a reactor building is buried at a level of a base rock. In the step of building construction, the base rock around the building is dug of keeping a construction space. The base rock present between the digging line and the building is replaced with an artificial base rock comprising aggregates and cement having a building constraining force substantially equal with that of the lower supporting base rock to obtain constraining force for the side portion of the building. The building itself is made of concrete steels. As the material for replacing the base rock between the digging line and the building, non-reinforced concrete having no steels may provide sufficient function. The burying depth is determined so as to align the surface of the base rock with the level of the base floor of the building. With such procedures, since it is not necessary to increase the area of the lower portion of the building, the amount of the materials for the building can be reduced. In addition, the earthquakes stability can be ensured without changing the shape of the building. (I.N.)

  9. Management Of Building Projects

    OpenAIRE

    Niko Majdandzic; Tadija Lovric; Vido Peric

    2006-01-01

    In this work we have shown the concept of logistic support in management in building production and in building of objects, which is realised in Enterprise resource Planning – ERP system ERPINSG, developed in Informatic firm Informatic engineering – ININ in Slavonski Brod, and in cooperation with scientists of catedra for informatics of Faculty of Mechanical Engineering and users from building firms.

  10. Concepts in Building Firesafety.

    Science.gov (United States)

    Egan, M. David

    The goal of this book is to present in a graphical format the principles of design for building firesafety. The book's more than 270 illustrations represent the core of its coverage of factors affecting fire ignition and spread in buildings, building site planning for fire suppression and occupant rescue operations, protection by building…

  11. Green Building Research Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Sailor, David Jean [Portland State Univ., Portland, OR (United States)

    2013-12-29

    This project provided support to the Green Building Research Laboratory at Portland State University (PSU) so it could work with researchers and industry to solve technical problems for the benefit of the green building industry. It also helped to facilitate the development of PSU’s undergraduate and graduate-level training in building science across the curriculum.

  12. Courthouse Prototype Building

    Energy Technology Data Exchange (ETDEWEB)

    Malhotra, Mini [ORNL; New, Joshua Ryan [ORNL; Im, Piljae [ORNL

    2018-02-01

    As part of DOE's support of ANSI/ASHRAE/IES Standard 90.1 and IECC, researchers at Pacific Northwest National Laboratory (PNNL) apply a suite of prototype buildings covering 80% of the commercial building floor area in the U.S. for new construction. Efforts have started on expanding the prototype building suite to cover 90% of the commercial building floor area in the U.S., by developing prototype models for additional building types including place of worship, public order and safety, public assembly. Courthouse is courthouse is a sub-category under the “Public Order and Safety" building type category; other sub-categories include police station, fire station, and jail, reformatory or penitentiary.ORNL used building design guides, databases, and documented courthouse projects, supplemented by personal communication with courthouse facility planning and design experts, to systematically conduct research on the courthouse building and system characteristics. This report documents the research conducted for the courthouse building type and proposes building and system characteristics for developing a prototype building energy model to be included in the Commercial Building Prototype Model suite. According to the 2012 CBECS, courthouses occupy a total of 436 million sqft of floor space or 0.5% of the total floor space in all commercial buildings in the US, next to fast food (0.35%), grocery store or food market (0.88%), and restaurant or cafeteria (1.2%) building types currently included in the Commercial Prototype Building Model suite. Considering aggregated average, courthouse falls among the larger with a mean floor area of 69,400 sqft smaller fuel consumption intensity building types and an average of 94.7 kBtu/sqft compared to 77.8 kBtu/sqft for office and 80 kBtu/sqft for all commercial buildings.Courthouses range in size from 1000 sqft to over a million square foot building gross square feet and 1 courtroom to over 100 courtrooms. Small courthouses

  13. Applications of passive remote surface acoustic wave sensors in high-voltage systems; Einsatz von passiven funkabfragbaren Oberflaechenwellensensoren in der elektrischen Energietechnik

    Energy Technology Data Exchange (ETDEWEB)

    Teminova, R

    2007-06-29

    Passive remote Surface Acoustic Wave (SAW) sensors have been applied e.g. as temperature, pressure or torque sensors. Their important advantages over standard methods are their passive operating principle, which allows operation without any power supply, as well as the wireless high-frequency signal transmission over distances up to about 10..15 m even through (non metallic) housings. These properties of SAW sensors particularly qualify them for applications in high voltage operational equipment. First experience was gained in a long time field test of surge arrester monitoring based on SAW temperature sensors in a German high-voltage substation. Now, this system has been further developed at Darmstadt University of Technology for other applications, the first of them being an overhead line (OHL) conductor temperature measurement, the second one a temperature monitoring system for of high-voltage disconnectors. After designing and building the sensors, extensive laboratory tests were carried out applying high-voltage, high-current and thermal stress in order to approve the suitability for the intended application. All these tests confirmed the assumption that SAW sensors, due to their passive working principle, are not affected at all by any kind of electrical, magnetic or thermal stress that may occur during service. The complete temperature sensor consists of three parts: a sensor chip, an antenna which receives and transmits the signal from and to the radar unit and a body for installation and for protection against environmental impact. One must find a good compromise between optimizing of thermal, dielectric and high-frequency characteristics and at the same time taking into consideration a simple installation. These requirements on the SAW sensors turned out to be difficult to coordinate. To achieve a high measuring precision is especially difficult. First, a new sensor for OHL application was developed. The OHL conductor temperature sensor had been optimized

  14. Green Buildings and Health.

    Science.gov (United States)

    Allen, Joseph G; MacNaughton, Piers; Laurent, Jose Guillermo Cedeno; Flanigan, Skye S; Eitland, Erika Sita; Spengler, John D

    2015-09-01

    Green building design is becoming broadly adopted, with one green building standard reporting over 3.5 billion square feet certified to date. By definition, green buildings focus on minimizing impacts to the environment through reductions in energy usage, water usage, and minimizing environmental disturbances from the building site. Also by definition, but perhaps less widely recognized, green buildings aim to improve human health through design of healthy indoor environments. The benefits related to reduced energy and water consumption are well-documented, but the potential human health benefits of green buildings are only recently being investigated. The objective of our review was to examine the state of evidence on green building design as it specifically relates to indoor environmental quality and human health. Overall, the initial scientific evidence indicates better indoor environmental quality in green buildings versus non-green buildings, with direct benefits to human health for occupants of those buildings. A limitation of much of the research to date is the reliance on indirect, lagging and subjective measures of health. To address this, we propose a framework for identifying direct, objective and leading "Health Performance Indicators" for use in future studies of buildings and health.

  15. Commercial Buildings Characteristics, 1992

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-29

    Commercial Buildings Characteristics 1992 presents statistics about the number, type, and size of commercial buildings in the United States as well as their energy-related characteristics. These data are collected in the Commercial Buildings Energy Consumption Survey (CBECS), a national survey of buildings in the commercial sector. The 1992 CBECS is the fifth in a series conducted since 1979 by the Energy Information Administration. Approximately 6,600 commercial buildings were surveyed, representing the characteristics and energy consumption of 4.8 million commercial buildings and 67.9 billion square feet of commercial floorspace nationwide. Overall, the amount of commercial floorspace in the United States increased an average of 2.4 percent annually between 1989 and 1992, while the number of commercial buildings increased an average of 2.0 percent annually.

  16. Smart buildings: Energy efficient conditioning of building occupants

    NARCIS (Netherlands)

    Zeiler, W.; Houten, van M.A.; Boxem, G.; Vehler, R.; Verhoeven, M.; Fremouw, M.

    2009-01-01

    To further optimize energy performance of buildings, intelligent building control offers new possibilities. Intelligent Software Agents (ISA) can be implemented at different levels of building automation. Individual agents for individual climate control for each user of the building in combination

  17. Rational use of energy at the University of Stuttgart building environment. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, F.; Freihofer, H. [Forschungsinst. fuer Kerntechnik und Energiewandlung e.V., Stuttgart (Germany). Abt. Wissensverarbeitung und Numerik; Stergiaropoulos, K.; Claus, G. [Forschungsgesellschaft Heizung-Lueftung-Klimatechnik Stuttgart mbH (Germany); Harter, J.; Ast, H. [IFB, Dr. R. Braschel GmbH, Stuttgart (Germany); Will, M.; Haerther, H.; Franke, H. [Sulzer-Infra Deutschland GmbH, Stuttgart (Germany)

    1999-07-01

    We have demonstrated with the project REUSE that it is possible to optimise complex building ensembles (properties) energetically by applying the contracting model. However, there are some basic requirements which have to be fullfilled to reach such a goal. They include 1. basic consense among those dealing with specific aspects concerning energy use of the buildings considered, 2. transparent and most actual measured data of energy consumption, 3. unified and reliable system for evaluation of measures taken to save energy (base line), 4. partners who are able to define measures which have to be undertaken to save energy in a specific building and who are able to implement these measures effectively and user friendly. This report describes how we have fullfilled these requirements at the campus 'Pfaffenwald' of the University of Stuttgart. Numerous daily life difficulties had to be overcome before the project became a success and we were able to derive valuable consequences. These consequences went far beyond the original goal to save energy worth about 3 to 4 Million Deutsche Marks and finally resulted in a new thinking about energy use at the campus. Therefore, we see the project REUSE as extremely successful and hope it will encourage similar projects and provide valuable hints to them. (orig.) [German] Im Vorhaben REUSE wurde gezeigt, dass und wie es moeglich ist, komplexe Liegenschaften nach dem Contracting Modell energetisch zu optimieren. Voraussetzungen dafuer sind: 1. ein gemeinsames Basisverstaendnis all derer mit Energiefragen befassten, 2. eine transparente und zeitnahe Erfassung der Verbraeuche, 3. ein einheitliches und verlaessliches System zur Bewertung der Massnahmen zur Energieeinsparung (Baseline) und 4. Partner, die Massnahmen an Einzelobjekten effektiv und kundenfreundlich umsetzen koennen. Dieser Bericht zeigt auf, wie wir an der Liegenschaft CAMPUS Pfaffenwald der Universitaet Stuttgart diese Voraussetzungen geschaffen haben, wie die

  18. Residential and commercial buildings

    Energy Technology Data Exchange (ETDEWEB)

    Svendsen, Svend; Furbo, S.

    2012-11-15

    Low-energy buildings can make a major contribution to general sustainable development by providing a solution to problems related to the use of fossil fuels. The EPBD (EU Directive on Energy Performance of Buildings) requirements that by 2020 new building shall be constructed to use nearly zero energy, and no fossil fuels, can be accomplished by combining low-energy buildings with renewable energy via low-temperature district heating in cities and suburbs, and via heat pumps for low-density settlements. Based on experience with passive houses, low-energy buildings meeting the energy performance requirements of 2020 are expected to cost only a few percent more than conventional buildings. The very large and rapid changes needed in the energy performance of buildings is a challenge for the building sector, but one that can be overcome by better methods of developing products and designing, constructing and operating buildings. Simulation-based analysis and optimisation, and considerations of durability, will be important here. Building may thus be transformed from an experience-based sector to one based on knowledge and research, with high-quality sustainable products and good business opportunities. (Author)

  19. Green Building Tools for Tribes

    Science.gov (United States)

    Tribal green building tools and funding information to support tribal building code adoption, healthy building, siting, energy efficiency, renewable energy, water conservation, green building materials, recycling and adaptation and resilience.

  20. Net positive energy buildings

    International Nuclear Information System (INIS)

    Romero, A.; Barreiro, E.; Sanchez Zabala, V.

    2010-01-01

    Buildings are great consumers of energy, being responsible for almost 36% of CO2 emissions in Europe. Though there are many initiatives towards the reduction of energy consumption and CO2 emissions in buildings, many of the alternatives are diminished due to a lack of a unique and holistic approach to the problem. This paper reports a new innovative concept of Positive Energy Buildings (EB+), as well as an integral methodology that covers the overall design process for achieving them. The methodology evaluates energy efficiency solutions at different scales, from building site to generation systems. An educational building design in Navarra serves as a case study to check the feasibility of the proposed methodology. The study concludes that the key to achieve a Positive Energy Building is a minimized energy demand, complemented by efficient facilities and enhanced by distributed power generation from renewable sources. (Author).

  1. Green buildings pay

    DEFF Research Database (Denmark)

    Naboni, Emanuele; Edwards, Brian

    The new edition of ‘Green Buildings Pay’ authored by Brian Edwards and Emanuele Naboni explores the business and professional benefits which derive from architectural design driven by sustainability. With a new sub-title ‘Green Buildings Pay: design, productivity and ecology’ the book argues...... that environmental design has altered how we design, construct and manage buildings. The book has relevance to those who not only design and engineer buildings but to those who commission architecture and those who occupy the products of this process. Hence, the user is a key consideration. The book examines via...... a number of LEED and BREEAM cases the buildings which flow from corporate environmental responsibility. A number of office and university buildings are examined from three main perspectives- the architect, client and user. One key finding is that architectural innovation has been driven by ecological...

  2. Building materials. Stichwort Baustoff

    Energy Technology Data Exchange (ETDEWEB)

    Rohwer, W

    1981-01-01

    To handle building materials properly, one must know about their characteristics. This pocket book will be of help: structured like a glossary, it gives brief descriptions of the most common building materials. It is small and handy enough to be a constant companion to resident engineers, foremen, gangers, building tradesmen, and construction workers and an aid in their training. The following groups of building materials are discussed: Natural stone; units for brick walls, floors, and roofs; mortar and concrete (definitions, binders, aggregates, additives, admixtures, mixing water); special types of plaster and rendering; light-weight building boards and wood wool basis; multilayer light-weight building boards; gypsum plasterboards; chimney construction; sewers; thermal insulation and sound section; structural steels; plastics.

  3. Use of waste fuels in cement works. Application of the 17th Ordinance for the Protection against Nuisances (BImSchV) to plants for baking cement clinkers; Einsatz von Sonderbrennstoffen in Zementwerken. Anwendung der 17. BlmSchV auf Anlagen zum Brennen von Zementklinker

    Energy Technology Data Exchange (ETDEWEB)

    Mair, K. [Bayerisches Landesamt fuer Umweltschutz, Muenchen (Germany)

    1995-06-01

    In cement works, other fuels besides the regular ones - coal, heavy fuel and natural gas - are used. Burning these materials requires proper handling and must correspond to state-of-the-art practices, especially as regards clean air measures. The ordinance on fire-places for wastes and other fuel materials (17th ordinance for the protection against nuisances) contains not only relevant emission limits but makes also stipulations as to the design of fire-places, emission monitoring, and general rules. (orig.) [Deutsch] In der Zementindustrie werden neben den sogenannten Regelbrennstoffen wie Kohle, Heizoel S und Erdgas auch Sonderbrennstoffe eingesetzt. Der Einsatz dieser Stoffe setzt jedoch eine ordnungsgemaesse Handhabung bei gleichzeitiger Einhaltung der dem Stand der Technik entsprechenden Massnahmen, besonders zur Luftreinhaltung, voraus. In der Verordnung ueber Verbrennungsanlagen fuer Abfaelle und aehnliche brennbare Stoffe (17. BlmSchV) werden hierzu neben den Emissionsbegrenzungen auch Anforderungen an die Beschaffenheit der Feuerungen, die Emissionsueberwachung sowie allgemeine Regelungen vorgegeben. (orig.)

  4. Trends in building materials

    CSIR Research Space (South Africa)

    Mapiravana, Joseph

    2012-07-01

    Full Text Available , steel and composites research. Analysis of the building materials market situation in South Africa identified the major building material cost drivers as cement and concrete and steel. For South Africa, research and development focus has been... in South Africa be cement and concrete, light-weight steel construction, smart tiles and composite materials. Nanotechnology materials should be used for property enhancement. The building materials developed should be modularised and/or panelised...

  5. Radon in buildings

    International Nuclear Information System (INIS)

    Connell, J.J.

    1991-01-01

    This guide is intended to inform designers, householders and other building owners about the radon problem and to help in deciding if there is need to take any action to reduce radon levels in their homes or other buildings.It explains what radon is, how it enters buildings and what effect it may have on health. Reference is made to some of the usual ways of reducing the level of radon and guidance is given on some sources of assistance

  6. Radon in buildings

    International Nuclear Information System (INIS)

    Ryan, N.M.; Finn, M.

    1995-01-01

    This guide is intended to inform designers, contractors, householders and other building owners about radon in buildings and to provide guidance where it has been decided to take action to reduce radon levels. It gives some pointers to good practice insofar as it relates to non complex buildings of normal design and construction. Reference is made to the usual ways of reducing l;levels of radon and guidance is given on sources of further information. I

  7. Development of Ecological Buildings

    Directory of Open Access Journals (Sweden)

    Andrius Keizikas

    2011-04-01

    Full Text Available The article presents research on ecological buildings and their influence on the constructional sphere. The aim of the paper is to reveal the essence of ecological architecture showing substantial progress and its potential to stimulate architectural and technological growth. The article also describes relations between the ideas of ecological buildings and the ‘passive house’ concepts and aspects of development as well as describes the possibilities of improving building sustainability and energy efficiency. Article in Lithuanian

  8. Healthy Buildings '88

    International Nuclear Information System (INIS)

    Berglund, B.; Lindvall, T.; Maansson, L.G.

    1988-06-01

    The Healthy Buildings '88 Conference focuses on the technical solutions and functional requirements contributing to Healthy Buildings for people to live and work in. The main object of the Conference is to give architects, consultants, real-estate owners and manufacturers of building materials recommendations on choice of materials and choice of systems and on how to combine materials and systems. The program includes overview lectures, plenary symposia with invited speakers, workshops, poster presentations and an exhibition of scientific, educational and technical material. One part of the conference is devoted to the problem of radon in residential buildings

  9. Radon in large buildings

    International Nuclear Information System (INIS)

    Wilson, D.L.; Dudney, C.S.; Gammage, R.B.

    1993-01-01

    Over the past several years, considerable research has been devoted by the U.S. Environmental Protection Agency (USEPA) and others to develop radon sampling protocols for single family residences and schools. However, very little research has been performed on measuring radon in the work place. To evaluate possible sampling protocols, 833 buildings throughout the United States were selected for extensive radon testing. The buildings tested (warehouses, production plants and office buildings) were representative of commercial buildings across the country both in design, size and use. Based on the results, preliminary radon sampling protocols for the work place have been developed. (orig.). (5 refs., 3 figs.)

  10. Net Zero Energy Buildings

    DEFF Research Database (Denmark)

    Marszal, Anna Joanna; Bourrelle, Julien S.; Gustavsen, Arild

    2010-01-01

    and identify possible renewable energy supply options which may be considered in calculations. Finally, the gap between the methodology proposed by each organisation and their respective national building code is assessed; providing an overview of the possible changes building codes will need to undergo......The international cooperation project IEA SHC Task 40 / ECBCS Annex 52 “Towards Net Zero Energy Solar Buildings”, attempts to develop a common understanding and to set up the basis for an international definition framework of Net Zero Energy Buildings (Net ZEBs). The understanding of such buildings...

  11. Sick building syndrome

    Directory of Open Access Journals (Sweden)

    Tjandra Y. Aditama

    2002-06-01

    Full Text Available Sick building syndrome describes a number of mostly unspesific complaints of some occupants of the building. The exact pathophysiological mechanism remains elusive. It is a multi factorial event which may include physical, chemical, biological as well as psycological factors. In many cases it is due to insufficient maintenance of the HVAC (heating, ventilation, air conditioning system in the building. Sign and symptoms can be uncomfortable and even disabling, which may include mucus membrane irritation, neurotoxic symptoms, asthma like symptoms, skin complaints, gastrointestinal symptoms and other related symptoms. There are various investigation methods to diagnose sick building syndrome, and on site assessment of the building is extremely useful. Prevention through a proactive air quality monitoring program is far more desirable than dealing with an actual sick building. Indoor air and the sick building symdrome serves as a paradigm of modern occupational and environmental medicine. (Med J Indones 2002; 11:124-31Keywords: indoor air pollution, sick building syndrome, building related illness

  12. Building valve amplifiers

    CERN Document Server

    Jones, Morgan

    2013-01-01

    Building Valve Amplifiers is a unique hands-on guide for anyone working with tube audio equipment--as an electronics hobbyist, audiophile or audio engineer. This 2nd Edition builds on the success of the first with technology and technique revisions throughout and, significantly, a major new self-build project, worked through step-by-step, which puts into practice the principles and techniques introduced throughout the book. Particular attention has been paid to answering questions commonly asked by newcomers to the world of the valve, whether audio enthusiasts tackling their first build or

  13. Manufacture and qualification of hot roll-clad composites with nickel base cladding material for use in flue gas desulphurization plants. Final report; Herstellung und Qualifizierung warmwalzplattierter Verbundwerkstoffe mit Nickelbasisauflagen fuer den Einsatz in Rauchgasentschwefelungsanlagen. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Kirchheiner, R.; Stenner, F.

    1992-03-16

    . organisch basierte Korrosionsschutzsysteme erleiden schon nach wenigen Betriebsjahren massive Schaeden. NiCrMo-Legierungen haben sich unter vergleichbaren Bedingungen in der chemischen Industrie seit Jahrzehnten bewaehrt. Unter wirtschaftlichen Gesichtspunkten kann beim Neubau dieser grossvolumigen Komponenten in REA die Verwendung dieser NiCrMo-Werkstoffe nur in plattierter Form erfolgen. Im Rahmen dieses Projektes wurde die Herstellung von warmwalzplattierten Verbundwerkstoffen, bestehend aus den Auflagewerkstoffen vom Typ NiMo16Cr15W (2.4819) und NiCr21No14W (2.4602) auf dem Traegerwerkstoff Stahl RSt 37-2 erprobt. Das Verhalten der Auflagewerkstoffe bei gleichfoermiger und lokaler Korrosionsbeanspruchung wurde u.a. in Standard-Laborpruefungen untersucht. Eine erhoehte IK-Anfaelligkeit hat sich in Uebereinstimmung mit den ausgezeichneten Gefuegebildern nicht ergeben. In weiteren Laborpruefungen unter REA-Simulat-Bedingungen sowie durch Auslagerungsversuche in laufenden REA konnten diese positiven Befunde auch auf die Praxis uebertragen werden. Das gilt uneingeschraenkt auch fuer den verbindungsgeschweissten Zustand mit artgleichem Schweisszusatz. Die neuen warmwalzplattierten Verbundwerkstoffe entsprechen in ihrem technologischen Verhalten denen der massiven Ausgangsbleche und sind damit fuer den Einsatz in Rauchgasreinigungsanlagen qualifiziert. (orig./BBR) With 32 refs., 13 tabs., 29 figs.

  14. Einsatz hydrogeochemischer Modelle in der Wasseraufbereitung

    Science.gov (United States)

    Wisotzky, Frank

    2012-09-01

    As part of a model-data investigation project, results of several water treatment studies were compared with hydrochemical models. The models used comparable hydrogeological reaction types that occur within aquifers and water treatment processes. They were tested on 3 different examples of water softening, de-nitrification and iron removal. Comparison of simulated and measured water chemical dynamics showed good agreement. In addition to mixing and formation of complexes, de-acidification and de-carbonisation processes were reproduced in the first example. The second example investigated de-nitrification in a straw filter and in a water plant filter with subsequent aeration. The third example showed iron removal where reactions with partially combusted dolomite were simulated with a computer model. All simulations showed good agreement with the observed data. The models have the advantage of yielding parameter results that are difficult to measure. This includes nitrogen gas release and the content of reacted and degradable organic substances. These tools may help to provide better insights into water treatment reactions.

  15. Electromagnetically shielded building

    International Nuclear Information System (INIS)

    Takahashi, T.; Nakamura, M.; Yabana, Y.; Ishikawa, T.; Nagata, K.

    1992-01-01

    This invention relates to a building having an electromagnetic shield structure well-suited for application to an information network system utilizing electromagnetic waves, and more particularly to an electromagnetically shielded building for enhancing the electromagnetic shielding performance of an external wall. 6 figs

  16. Reusing Old Manufacturing Buildings

    Science.gov (United States)

    Roman, Harry T.

    2014-01-01

    This article presents an interesting design challenge for students, one that will certainly let them integrate subject matter and get a sense of pride for doing something useful in their own community. The author would be willing to bet that the average town or city has some old red brick manufacturing building(s) that have seen much better days.…

  17. Building a Data Warehouse.

    Science.gov (United States)

    Levine, Elliott

    2002-01-01

    Describes how to build a data warehouse, using the Schools Interoperability Framework (www.sifinfo.org), that supports data-driven decision making and complies with the Freedom of Information Act. Provides several suggestions for building and maintaining a data warehouse. (PKP)

  18. Electromagnetically shielded building

    Energy Technology Data Exchange (ETDEWEB)

    Takahashi, T; Nakamura, M; Yabana, Y; Ishikawa, T; Nagata, K

    1992-04-21

    This invention relates to a building having an electromagnetic shield structure well-suited for application to an information network system utilizing electromagnetic waves, and more particularly to an electromagnetically shielded building for enhancing the electromagnetic shielding performance of an external wall. 6 figs.

  19. Building a Better Robot

    Science.gov (United States)

    Navah, Jan

    2012-01-01

    Kids love to build robots, letting their imaginations run wild with thoughts of what they might look like and what they could be programmed to do. Yet when students use cereal boxes and found objects to make robots, often the projects look too similar and tend to fall apart. This alternative allows students to "build" robots in a different way,…

  20. Building Numbers from Primes

    Science.gov (United States)

    Burkhart, Jerry

    2009-01-01

    Prime numbers are often described as the "building blocks" of natural numbers. This article shows how the author and his students took this idea literally by using prime factorizations to build numbers with blocks. In this activity, students explore many concepts of number theory, including the relationship between greatest common factors and…

  1. Building information modelling (BIM)

    CSIR Research Space (South Africa)

    Conradie, Dirk CU

    2009-02-01

    Full Text Available The concept of a Building Information Model (BIM) also known as a Building Product Model (BPM) is nothing new. A short article on BIM will never cover the entire filed, because it is a particularly complex filed that is recently beginning to receive...

  2. Heat loss from Buildings

    DEFF Research Database (Denmark)

    Karlsson, Kenneth; Næraa, Rikke

    1997-01-01

    Determination of heat loss coefficients for buildings in Denmark. The coefficient are determined for 15 building groups and 3 year intervals. They are based on the BBR-registre and assumptions of U-values(W/K*m2)and computed in a simple spreed sheet model.The results are used in the REVEILLE...

  3. SUSY GUT Model Building

    International Nuclear Information System (INIS)

    Raby, Stuart

    2008-01-01

    In this talk I discuss the evolution of SUSY GUT model building as I see it. Starting with 4 dimensional model building, I then consider orbifold GUTs in 5 dimensions and finally orbifold GUTs embedded into the E 8 xE 8 heterotic string.

  4. Building Maintenance Syllabus.

    Science.gov (United States)

    Fischer, Joseph; Messier, Joseph

    Building maintenance is a basic two-year trade education course requiring 2 1/2 hours of study on each of 160 teaching days per year. Student abilities should range from those capable of the simplest custodial work to those who may eventually be superintendents of building complexes. The syllabus is organized in sections by traditional skills…

  5. Building Global Learning Communities

    Science.gov (United States)

    Cochrane, Thomas; Buchem, Ilona; Camacho, Mar; Cronin, Catherine; Gordon, Averill; Keegan, Helen

    2013-01-01

    Within the background where education is increasingly driven by the economies of scale and research funding, we propose an alternative online open and connected framework (OOC) for building global learning communities using mobile social media. We critique a three year action research case study involving building collaborative global learning…

  6. Future Green Buildings

    DEFF Research Database (Denmark)

    Mathiesen, Brian Vad; Drysdale, David; Lund, Henrik

    an energy system integration perspective, heat savings, electricity savings, and user behavioural aspects as well as energy storage and household level flexibility. Many reports on green or sustainable buildings focus only on savings levels and disregard the cost of renewable energy production. Some reports......Efficient buildings are essential for an affordable Danish energy supply in 2050. The purpose of this report is to describe the contribution and role of the building sector in a 100% renewable energy future, as well as the transitions that are necessary in the building sector to support this change....... The report builds on a literature review encompassing more than 50 reports and research papers over the last 10 years and more than a two decades knowledge about the interactions between different components of the energy sector. The review has been focused on aspects such as cost-effective solutions from...

  7. Building perservation practice

    DEFF Research Database (Denmark)

    Pilegaard, Marie Kirstine

    , and they indicate the importance of this story to be preserved. The professionals, who cooperate on the preservation efforts for the cultural environments today, all emphasizes the communication of the story, but using different approaches towards the processes of reading, interpreting and communicating. The role...... planning? In this paper I will focus on the communication of the architects working with building preservation and planning, how they communicate the building, the interventions and the storytelling in practice. The methods used by the architects are based on a practice, where some skills are learned...... through education, such as documentation of buildings and the restoration as a way of communicating the architect's intervention on the building, meanwhile the communication of the buildings history is seen as a "natural" skill and the methods are not questioned in the practice. The storytelling has today...

  8. CERN's newest building

    CERN Multimedia

    Anaïs Vernède

    2011-01-01

    With a growing number of users looking for offices, the shortage of space has become acute, particularly for physicists. Building 42, inaugurated on Friday 11 February, offers almost 300 new work-spaces and a particularly pleasant working environment.   Mauro Dell’Ambrogio, the Swiss State Secretary for Education and Research (left), Rolf Heuer , CERN Director-General (centre), and Mark Muller, President of the Government of the Republic and Canton of Geneva and Head of the Department of Construction and Information Technology (right) at the opening of Building 42 on 11 February, 2011.   Construction work for the new Building 42 began in January 2009, thanks to support from the Swiss foundation FIPOI (Fondation des immeubles pour les organisations internationales). After two years of work, the building, an extension of Building 40, is ready to accommodate physicists from around the world who have come to work on the LHC. "We had more than 25 external contractors working...

  9. Building the green way.

    Science.gov (United States)

    Lockwood, Charles

    2006-06-01

    Just five or six years ago, the term "green building" evoked visions of barefoot, tie-dyed, granola-munching denizens. There's been a large shift in perception. Of course, green buildings are still known for conserving natural resources by, for example, minimizing on-site grading, using alternative materials, and recycling construction waste. But people now see the financial advantages as well. Well-designed green buildings yield lower utility costs, greater employee productivity, less absenteeism, and stronger attraction and retention of workers than standard buildings do. Green materials, mechanical systems, and furnishings have become more widely available and considerably less expensive than they used to be-often cheaper than their standard counterparts. So building green is no longer a pricey experiment; just about any company can do it on a standard budget by following the ten rules outlined by the author. Reliable building-rating systems like the U.S. Green Building Council's rigorous Leadership in Energy and Environmental Design (LEED) program have done much to underscore the benefits of green construction. LEED evaluates buildings and awards points in several areas, such as water efficiency and indoor environmental quality. Other rating programs include the UK's BREEAM (Building Research Establishment's Environmental Assessment Method) and Australia's Green Star. Green construction is not simply getting more respect; it is rapidly becoming a necessity as corporations push it fully into the mainstream over the next five to ten years. In fact, the author says, the owners of standard buildings face massive obsolescence. To avoid this problem, they should carry out green renovations. Corporations no longer have an excuse for eschewing environmental and economic sustainability. They have at their disposal tools proven to lower overhead costs, improve productivity, and strengthen the bottom line.

  10. Building Software with Gradle

    CERN Multimedia

    CERN. Geneva; Studer, Etienne

    2014-01-01

    In this presentation, we will give an overview of the key concepts and main features of Gradle, the innovative build system that has become the de-facto standard in the enterprise. We will cover task declaration and task graph execution, incremental builds, multi-project builds, dependency management, applying plugins, extracting reusable build logic, bootstrapping a build, and using the Gradle daemon. By the end of this talk, you will have a good understanding of what makes Gradle so powerful yet easy to use. You will also understand why companies like Pivotal, LinkedIn, Google, and other giants with complex builds count on Gradle. About the speakers Etienne is leading the Tooling Team at Gradleware. He has been working as a developer, architect, project manager, and CTO over the past 15 years. He has spent most of his time building software products from the ground up and successfully shipping them to happy customers. He had ...

  11. Buildings Interoperability Landscape

    Energy Technology Data Exchange (ETDEWEB)

    Hardin, Dave [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Stephan, Eric G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wang, Weimin [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Corbin, Charles D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Widergren, Steven E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-12-31

    Through its Building Technologies Office (BTO), the United States Department of Energy’s Office of Energy Efficiency and Renewable Energy (DOE-EERE) is sponsoring an effort to advance interoperability for the integration of intelligent buildings equipment and automation systems, understanding the importance of integration frameworks and product ecosystems to this cause. This is important to BTO’s mission to enhance energy efficiency and save energy for economic and environmental purposes. For connected buildings ecosystems of products and services from various manufacturers to flourish, the ICT aspects of the equipment need to integrate and operate simply and reliably. Within the concepts of interoperability lie the specification, development, and certification of equipment with standards-based interfaces that connect and work. Beyond this, a healthy community of stakeholders that contribute to and use interoperability work products must be developed. On May 1, 2014, the DOE convened a technical meeting to take stock of the current state of interoperability of connected equipment and systems in buildings. Several insights from that meeting helped facilitate a draft description of the landscape of interoperability for connected buildings, which focuses mainly on small and medium commercial buildings. This document revises the February 2015 landscape document to address reviewer comments, incorporate important insights from the Buildings Interoperability Vision technical meeting, and capture thoughts from that meeting about the topics to be addressed in a buildings interoperability vision. In particular, greater attention is paid to the state of information modeling in buildings and the great potential for near-term benefits in this area from progress and community alignment.

  12. Energy management systems in buildings

    Energy Technology Data Exchange (ETDEWEB)

    Lush, D. M.

    1979-07-01

    An investigation is made of the range of possibilities available from three types of systems (automatic control devices, building envelope, and the occupants) in buildings. The following subjects are discussed: general (buildings, design and personnel); new buildings (envelope, designers, energy and load calculations, plant design, general design parameters); existing buildings (conservation measures, general energy management, air conditioned buildings, industrial buildings); man and motivation (general, energy management and documentation, maintenance, motivation); automatic energy management systems (thermostatic controls, optimized plant start up, air conditioned and industrial buildings, building automatic systems). (MCW)

  13. Zero Energy Building

    DEFF Research Database (Denmark)

    Marszal, Anna Joanna; Heiselberg, Per; Bourrelle, J.S.

    2011-01-01

    The concept of Zero Energy Building (ZEB) has gained wide international attention during last few years and is now seen as the future target for the design of buildings. However, before being fully implemented in the national building codes and international standards, the ZEB concept requires......, (4) the type of energy balance, (5) the accepted renewable energy supply options, (6) the connection to the energy infrastructure and (7) the requirements for the energy efficiency, the indoor climate and in case of gird connected ZEB for the building–grid interaction. This paper focuses...

  14. Integrated Building Design

    DEFF Research Database (Denmark)

    Heiselberg, Per

    In the first half of the 20th century, HVAC systems and artificial lighting were developed to meet indoor comfort needs. Before the introduction of mechanical systems, climate - not building style or appearance - was the major determinant of building form. Comfort was achieved through passive means...... and architectural features built into the design. However, with the advent of new technologies, architects were no longer constrained by the need to ensure that buildings had ample daylighting, remained airy and cool in the summer and warm in the winter. Since HVAC systems and artificial lighting could satisfy...

  15. Building Social Web Applications

    CERN Document Server

    Bell, Gavin

    2009-01-01

    Building a web application that attracts and retains regular visitors is tricky enough, but creating a social application that encourages visitors to interact with one another requires careful planning. This book provides practical solutions to the tough questions you'll face when building an effective community site -- one that makes visitors feel like they've found a new home on the Web. If your company is ready to take part in the social web, this book will help you get started. Whether you're creating a new site from scratch or reworking an existing site, Building Social Web Applications

  16. Commissioning for Humidified Buildings

    National Research Council Canada - National Science Library

    Deal, Brian

    1998-01-01

    .... Although proper commissioning procedures have been noted to reduce the potential for approximately 70 percent of these claims, no standards exist for the control of moisture migration in building...

  17. Greening Existing Tribal Buildings

    Science.gov (United States)

    Guidance about improving sustainability in existing tribal casinos and manufactured homes. Many steps can be taken to make existing buildings greener and healthier. They may also reduce utility and medical costs.

  18. Net-zero building

    CSIR Research Space (South Africa)

    Van Wyk, Llewellyn V

    2013-01-01

    Full Text Available In its experimental work on research and development of innovative technologies for low income housing on the Innovation Site on the CSIR campus in Pretoria, the Building Science and Technology (BST) competence area identified a number...

  19. Building and Contents Insurance.

    Science.gov (United States)

    Freese, William C.

    Insurance coverage of school buildings and contents is becoming increasingly difficult to obtain, and increases of 50 percent or more in the premium are not uncommon. Methods of reducing premium increases are outlined in this speech. (MLF)

  20. Research Staff | Buildings | NREL

    Science.gov (United States)

    Research Staff Research Staff Photo of Roderick Jackson Roderick Jackson Laboratory Program Manager -related research at NREL. He works closely with senior laboratory management to set the strategic agenda for NREL's buildings portfolio, including all research, development, and market implementation

  1. Environmental indicators for buildings

    DEFF Research Database (Denmark)

    Dammann, S.

    Whenever we shop, the products we consider buying are labelled with the economical price we have to pay if we want to purchase them - an important parameter in our decisions as purchasers. The increrasing awareness for environmental limits and backlashes of human activities also in the building...... sector have fostered the wish to define 'the ecological price' of a building as a help for environmental conscious decision-making. In a social constructivist approach this Ph.D. thesis looks across and beyond the manifold existing approaches for environmental indicators for buildings. It acknowledges...... in the Netherlands. It identifies lines of conflict and areas of consent betweeen the relevant actors and elaborates scenarios for a possible closure of ongoing debate about environmental indicators for buildings....

  2. Building a Circular Future

    DEFF Research Database (Denmark)

    Merrild, Heidi

    2016-01-01

    Natural resources are scarce and construction accounts for 40 percent of the material and energy consumption in Europe. This means that a switch to a circular future is necessary. ’Building a Circular Future’ maps out where we are, where we are going, and what is needed for this conversion to take...... on the project’s strategies. The financial result is a profit of DKK 35 million on the structure alone in the demolition of a building built for the cost of DKK 860 million. The total potential for the whole building, calculated in projected material prices, is estimated to be up to 16% of the total construction...... of the circular strategies is not only in the future. Increased flexibility, optimized operation and maintenance, as well as a healthier building, is low-hanging fruit that can be harvested today. The project’s principles can be implemented in industrialized construction in a large scale today. That is proven...

  3. Buildings exposed to fire

    International Nuclear Information System (INIS)

    1987-01-01

    The 24 lectures presented to the colloquium cover the following subject fields: (1) Behaviour of structural components exposed to fire; (2) Behaviour of building materials exposed to fire; (3) Thermal processes; (4) Safety related, theoretical studies. (PW) [de

  4. Municipal Building Energy Usage

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — This data set contains energy use data from 2009-2014 for 139 municipally operated buildings. Metrics include: Site & Source EUI, annual electricity, natural...

  5. Radioactivity of building materials

    International Nuclear Information System (INIS)

    Terpakova, E.

    2000-01-01

    In this paper the gamma-spectrometric determination of natural radioactivity in the different building materials and wares applied in Slovakia was performed. The specific activities for potassium-40, thorium, radium as well as the equivalent specific activities are presented

  6. Plataforma smart building

    OpenAIRE

    Cidrera Lopez, Alain

    2013-01-01

    The overall project is a system (hardware + software) that allows monitoring and control in a building / office different security systems, energy, communications, home automation, PKI's overall business that will increase all the efficiency of the building and the business and ensure the continuity of it. My participation in this Project will mainly focus on the development of hardware components, monitoring and control system (home automation, energy, safety control elements ...) and softwa...

  7. BUILDING MECHATRONICS SIMULATION SYSTEM

    OpenAIRE

    HUSI Géza; SZÁSZ Csaba; HASHIMOTO Hideki; NIITSUMA Mihoko

    2014-01-01

    In international references a net zero-energy building (NZEB) is defined as a residential or commercial building with greatly reduced energy needs through efficiency gains such that the balance of energy needs can be supplied with renewable technologies. According to this general term definition, the essence of the concept is that by using low-cost and locally available nonpolluting sources, they generate energy onsite, in a quantity equal or greater than the total amo...

  8. National Tribal Building Codes Summit

    Science.gov (United States)

    National Tribal Building Codes summit statement developed to support tribes interested in adopting green and culturally-appropriate building systems to ensure safe, sustainable, affordable, and culturally-appropriate buildings on tribal lands.

  9. Diffusion in building wakes

    International Nuclear Information System (INIS)

    Ramsdell, J.V.

    1988-03-01

    Straight-line Gaussian models adequately describe atmospheric diffusion for many applications. They have been modified for use in estimating diffusion in building wakes by adding terms that include projected building area and by redefining the diffusion coefficients so that the coefficients have minimum values that are related to building dimensions. In a recent study, Ramsdell reviewed the building-wake dispersion models used by the Nuclear Regulatory Commission (NRC) in its control room habitability assessments. The review included comparison of model estimates of centerline concentrations with concentrations observed in experiments at seven nuclear reactors. In general, the models are conservative in that they tend to predict concentrations that are greater than those actually observed. However, the models show little skill in accounting for variations in the observed concentrations. Subsequently, the experimental data and multiples linear regression techniques have been used to develop a new building wake diffusion model. This paper describes the new building wake model and compares it with other models. 8 refs., 2 figs

  10. Building Canada: Phase One

    Energy Technology Data Exchange (ETDEWEB)

    Anon

    2004-04-15

    The 'Building Canada' program modelled after the 'Building America' program, aims at increasing energy efficiency and affordability, primarily for single family homes. The program takes a holistic and whole house view, employing a systems approach and is committed to continuous improvement through testing, evaluation, retesting and novel construction practices. The program's objective is to re-engineer house designs so that builders can take advantage of advanced products and achieve maximum efficiency. Building Canada aims to achieve its objectives through partnership with the housing industry, focusing on increasing energy efficiency while reducing construction time, using and wasting fewer materials, forestalling call backs, and reducing overall costs. The Building Canada procedures encompass marketing, research of builder's operations, re-engineering mechanical systems, framing components and techniques, moisture control and thermal performance, construction, resolution of problems in re-engineered homes, and discussion of results in demonstration homes. The program as a whole is built on the feasibility study of a Building Canada program carried out in Nova Scotia and Ontario. Some of the results of this pilot study summarized in this report indicate that the Building Canada is not suitable for use by small builders. Benefits are most likely to be realized by only by builders constructing more than 100 homes annually.

  11. Building Services Requests Subsystem (BSRS) -

    Data.gov (United States)

    Department of Transportation — Lotus Notes workflow application used for the submission, processing, tracking and reporting of building service related requiests. Enables regional office building...

  12. DEGAM-Leitlinien als App für Mobiltelefone – Einsatz, Anregungen und Nutzen für den Lernprozess von Studierenden im Fach Allgemeinmedizin [Smartphone Application of Primary Care Guidelines used in Education of Medical Students

    Directory of Open Access Journals (Sweden)

    Waldmann, Uta-Maria

    2013-02-01

    durch die App gefördert, insgesamt ist die Anwendung für die Bedürfnisse dieser Usergruppe gut geeignet.Diskussion: Die Leitlinien-App wurde von Studierenden sehr positiv bewertet: Als moderne Form, ihnen die Leitlinien näher zu bringen und ihre Kenntnisse zu erweitern, gerade auch durch den flexiblen Einsatz in Nischenzeiten und das attraktive Medium Smartphone. Letzteres verhindert aber auch eine verbindliche Curriculare Implementierung in der Pflichtlehre, da nicht alle Studierenden Smartphones nutzen. Sie ist eine sinnvolle Ergänzung mit Mehrwert zu den bereits bestehenden Lernangeboten und unterstützt die Evidenz basierte Lehre im Fach Allgemeinmedizin – die nicht nur für die universitären Kurse, sondern auch für Famulaturen geeignet ist.

  13. Building Better Buildings: Sustainable Building Activities in California Higher Education Systems.

    Science.gov (United States)

    Sowell, Arnold; Eichel, Amanda; Alevantis, Leon; Lovegreen, Maureen

    2003-01-01

    This article outlines the activities and recommendations of California's sustainable building task force, discusses sustainable building activities in California's higher education systems, and highlights key issues that California is grappling with in its implementation of sustainable building practices. (EV)

  14. Building air exhaustion device

    International Nuclear Information System (INIS)

    Suzuki, Seijiro.

    1995-01-01

    An opening is formed on the side wall of a building such as of a nuclear power plant, and a blow out panel is held (supported) by a clip for closing the opening. A large-diameter pipeline is connected at one end to the opening so as to cover the blow out panel, and immersed at the other end in a pool water. When a pipeline such as of main steam pipelines is ruptured in the building, high temperature and high pressure coolants are flown out from the ruptured port, and the pressure in the building is elevated. The blow out panel falls off from the side of the building by the elevation of the pressure in the building. Steams or compressed air discharged from the opening is introduced to the pool through the large diameter pipeline, then the steams are condensed by the pool water and radioactive materials contained in the condensed steams are kept in the pool water. Radioactive materials contained in the released compression air are also removed into the pool water. (I.N.)

  15. Nuclear reactor buildings

    International Nuclear Information System (INIS)

    Nagashima, Shoji; Kato, Ryoichi.

    1985-01-01

    Purpose: To reduce the cost of reactor buildings and satisfy the severe seismic demands in tank type FBR type reactors. Constitution: In usual nuclear reactor buildings of a flat bottom embedding structure, the flat bottom is entirely embedded into the rock below the soils down to the deck level of the nuclear reactor. As a result, although the weight of the seismic structure can be decreased, the amount of excavating the cavity is significantly increased to inevitably increase the plant construction cost. Cross-like intersecting foundation mats are embedded to the building rock into a thickness capable withstanding to earthquakes while maintaining the arrangement of equipments around the reactor core in the nuclear buildings required by the system design, such as vertical relationship between the equipments, fuel exchange systems and sponteneous drainings. Since the rock is hard and less deformable, the rigidity of the walls and the support structures of the reactor buildings can be increased by the embedding into the rock substrate and floor responsivity can be reduced. This enables to reduce the cost and increasing the seismic proofness. (Kamimura, M.)

  16. Noise, buildings and people

    Energy Technology Data Exchange (ETDEWEB)

    Croome, D J

    1977-01-01

    This book covers the physics of acoustics necessary to understand the analytical aspects of acoustical design and noise control in buildings. The major part is devoted to the problems of noise and man, and other chapters cover features of noise control in and around buildings. In an introduction, building environmental engineering is dealth with in general terms of architecture, creativity, systms design, etc. Aspects of the acoustical environment, noise sources in buildings, control of airborne and structure-borne noise and acoustical design techniques are covered in Part II. Items include: comfort, physiological response to noise and vibrations, noise criteria, human performance, speech communication, landscaped offices, sound generation by air-conditioning and heating equipment, building structure and noise attenuation, acoustical design. Part III gives some fundamentals of acoustics; mechanical vibration, wave motion, propagation of sound, structure-borne sound, behavior of sound in rooms, transmission of sound through structure. References include lists of British standards and booklets on health and safety at work.

  17. Building information deduced

    DEFF Research Database (Denmark)

    Tamke, Martin; Myrup Jensen, Morten; Beetz, Jakob

    2014-01-01

    In recent years, Building Information Models have become commonplace in building profession. The extensive use and increasing experience with BIM models offers new perspectives and potentials for design and planning. A recent stakeholder study conducted by the authors of this paper show that in p......In recent years, Building Information Models have become commonplace in building profession. The extensive use and increasing experience with BIM models offers new perspectives and potentials for design and planning. A recent stakeholder study conducted by the authors of this paper show...... that in practice models are no longer solely observed as culmination of knowledge in a 3d representation of future built structures, but as a source of information in itself. Experienced users of BIM want to Find Information within a model or across a set of these and Compare models in order to evaluate states...... of a model, differences in separate models or models from different point of time. Current BIM tools support both modes only in a rudimentary form. This paper discusses current modes of information query within and across BIM models, shows beneficial scenarios for building and planning practice through...

  18. Automated model building

    CERN Document Server

    Caferra, Ricardo; Peltier, Nicholas

    2004-01-01

    This is the first book on automated model building, a discipline of automated deduction that is of growing importance Although models and their construction are important per se, automated model building has appeared as a natural enrichment of automated deduction, especially in the attempt to capture the human way of reasoning The book provides an historical overview of the field of automated deduction, and presents the foundations of different existing approaches to model construction, in particular those developed by the authors Finite and infinite model building techniques are presented The main emphasis is on calculi-based methods, and relevant practical results are provided The book is of interest to researchers and graduate students in computer science, computational logic and artificial intelligence It can also be used as a textbook in advanced undergraduate courses

  19. Buildings for advanced technology

    CERN Document Server

    Teague, E; Murday, James

    2015-01-01

    This book deals with the design and construction of buildings for nanoscale science and engineering research. The information provided in this book is useful for designing and constructing buildings for such advanced technologies as nanotechnology, nanoelectronics and biotechnology. The book outlines the technology challenges unique to each of the building environmental challenges outlined below and provides best practices and examples of engineering approaches to address them: • Establishing and maintaining critical environments: temperature, humidity, and pressure • Structural vibration isolation • Airborne vibration isolation (acoustic noise) • Isolation of mechanical equipment-generated vibration/acoustic noise • Cost-effective power conditioning • Grounding facilities for low electrical interference • Electromagnetic interference (EMI)/Radio frequency interference (RFI) isolation • Airborne particulate contamination • Airborne organic and chemical contamination • Environment, safety a...

  20. Intermittent heating of buildings

    Energy Technology Data Exchange (ETDEWEB)

    Kohonen, K

    1983-02-01

    Conditions for intermittent heating of buildings are considered both theoretically and experimentally. Thermal behaviour of buildings adn rooms in intermittent heating is simulated by a program based on the convective heat balance equation and by simplified RC-models. The preheat times and the heating energy savings compared with continuous heating are presented for typical lightweight, mediumweight and heavyweight classroom and office modules. Formulaes for estimating the oversizing of the radiator network, the maximum heat output of heat exchangers in district heating and the efficiency of heating boilers in intermittent heating are presented. The preheat times and heating energy savings with different heating control systems are determined also experimentally in eight existing buildings. In addition some principles for the planning and application of intermittent heating systems are suggested.

  1. RESRAD-BUILD verification

    International Nuclear Information System (INIS)

    Kamboj, S.; Yu, C.; Biwer, B. M.; Klett, T.

    2002-01-01

    The results generated by the RESRAD-BUILD code (version 3.0) were verified with hand or spreadsheet calculations using equations given in the RESRAD-BUILD manual for different pathways. For verification purposes, different radionuclides--H-3, C-14, Na-22, Al-26, Cl-36, Mn-54, Co-60, Au-195, Ra-226, Ra-228, Th-228, and U-238--were chosen to test all pathways and models. Tritium, Ra-226, and Th-228 were chosen because of the special tritium and radon models in the RESRAD-BUILD code. Other radionuclides were selected to represent a spectrum of radiation types and energies. Verification of the RESRAD-BUILD code was conducted with an initial check of all the input parameters for correctness against their original source documents. Verification of the calculations was performed external to the RESRAD-BUILD code with Microsoft Excel to verify all the major portions of the code. In some cases, RESRAD-BUILD results were compared with those of external codes, such as MCNP (Monte Carlo N-particle) and RESRAD. The verification was conducted on a step-by-step basis and used different test cases as templates. The following types of calculations were investigated: (1) source injection rate, (2) air concentration in the room, (3) air particulate deposition, (4) radon pathway model, (5) tritium model for volume source, (6) external exposure model, (7) different pathway doses, and (8) time dependence of dose. Some minor errors were identified in version 3.0; these errors have been corrected in later versions of the code. Some possible improvements in the code were also identified

  2. Carbon Efficient Building Solutions

    Directory of Open Access Journals (Sweden)

    Pellervo Matilainen

    2010-03-01

    Full Text Available Traditionally, the Finnish legislation have focused on energy use and especially on energy used for heating space in buildings. However, in many cases this does not lead to the optimal concept in respect to minimizing green house gases. This paper studies how CO2 emission levels are affected by different measures to reduce energy use in buildings. This paper presents two real apartment buildings with different options of energy efficiency and power sources. The calculations clearly show that in the future electricity and domestic hot water use will have high importance in respect to energy efficiency, and therefore also CO2 equivalent (eq emissions. The importance increases when the energy efficiency of the building increases. There are big differences between average Finnish production and individual power plants; CO2 eq emissions might nearly double depending on the energy source and the power plant type. Both a building with an efficient district heating as a power source, and a building with ground heat in addition to nuclear power electricity as a complimentary electricity source performed very similarly to each other in respect to CO2 eq emissions. However, it is dangerous to conclude that it is not important which energy source is chosen. If hypothetically, the use of district heating would dramatically drop, the primary energy factor and CO2 eq emissions from electricity would rise, which in turn would lead to the increase of the ground heat systems emissions. A problem in the yearly calculations is that the fact that it is very important, sometimes even crucial, when energy is needed, is always excluded.

  3. Building UIs with Wijmo

    CERN Document Server

    Zhang, Yuguang

    2013-01-01

    Written with an example-based approach, Building UIs with Wijmo leads you step by step through the implementation and customization of each library component and its associated resources. Reference tables of each configuration option, method, and event for each component are provided, alongside detailed explanations of how each widget is used.Building UIs with Wijmo is targeted at readers who are familiar with HTML, CSS, JavaScript, and jQuery, and have a basic understanding of web development. Although knowledge of jQuery UI is not mandatory, it would be a bonus as it is quite similar to Wijm

  4. Moisture conditions in buildings

    DEFF Research Database (Denmark)

    Rode, Carsten

    2012-01-01

    Growth of mould requires the presence of moisture at a certain high level. In a heated indoor environment such moisture levels occur only if there is a reason for the moisture supply. Such moisture can come from the use of the building, because of malfunctioning constructions, or it can be the re......Growth of mould requires the presence of moisture at a certain high level. In a heated indoor environment such moisture levels occur only if there is a reason for the moisture supply. Such moisture can come from the use of the building, because of malfunctioning constructions, or it can...

  5. Building global learning communities

    Directory of Open Access Journals (Sweden)

    Averill Gordon

    2013-09-01

    Full Text Available Within the background where education is increasingly driven by the economies of scale and research funding, we propose an alternative online open and connected framework (OOC for building global learning communities using mobile social media. We critique a three year action research case study involving building collaborative global learning communities around a community of practice of learning researchers and practitioners. The results include the development of a framework for utilising mobile social media to support collaborative curriculum development across international boundaries. We conclude that this framework is potentially transferrable to a range of educational contexts where the focus is upon student-generated mobile social media projects.

  6. PV cool-build

    Energy Technology Data Exchange (ETDEWEB)

    Cross, B.; Nuh, D.

    2004-07-01

    This report summarises the findings of a project to develop a method for calculating the operating temperature of building integrated photovoltaic (BIPV) modules/laminates which are estimated to operate above ambient temperature. The aim of the study was to minimise the temperature of the BIPV in order to increase the production of clean electricity. Details are given of a series of indoor experiments, computer modelling, and outdoor measurements. The production of a readily available, user-friendly design guide for architects and building designers is discussed.

  7. Vedr.: Military capacity building

    DEFF Research Database (Denmark)

    Larsen, Josefine Kühnel; Struwe, Lars Bangert

    2013-01-01

    Military capacity building has increasingly become an integral part of Danish defence. Military capacity is a new way of thinking Danish defence and poses a new set of challenges and opportunities for the Danish military and the Political leadership. On the 12th of december, PhD. Candidate Josefine...... Kühnel Larsen and researcher Lars Bangert Struwe of CMS had organized a seminar in collaboration with Royal Danish Defense Colleg and the East African Security Governance Network. The seminar focused on some of the risks involved in Military capacity building and how these risks are dealt with from...

  8. Ecology Beyond Building

    DEFF Research Database (Denmark)

    Peters, Terri

    2011-01-01

    As the designers of the WWf building in Zeist, The Netherslands a CO2-neutral, self-sufficient office complex, RAU has set the bar for sustainable research and design. Guesteditor Terri Peters visited the firm's studio in Amsterdam to talk to principal Thomas Rau. As Peters relates, Rau prefers t...... to put on the dwindling supply of raw materials rather than the immidiate problems of energy consumption for which there are solutions within reach. With the emphasis on a more far-reaching approach, he places buildings in a wider context of ecological thinking and systems....

  9. Building the perfect PC

    CERN Document Server

    Thompson, Robert Bruce

    2006-01-01

    This popular Build-It-Yourself (BIY) PC book covers everything you want to know about building your own system: Planning and picking out the right components, step-by-step instructions for assembling your perfect PC, and an insightful discussion of why you'd want to do it in the first place. Most big brand computers from HP, Dell and others use lower-quality components so they can meet their aggressive pricing targets. But component manufacturers also make high-quality parts that you can either purchase directly, or obtain through distributors and resellers. Consumers and corporations

  10. LHCb Dockerized Build Environment

    Science.gov (United States)

    Clemencic, M.; Belin, M.; Closier, J.; Couturier, B.

    2017-10-01

    Used as lightweight virtual machines or as enhanced chroot environments, Linux containers, and in particular the Docker abstraction over them, are more and more popular in the virtualization communities. The LHCb Core Software team decided to investigate how to use Docker containers to provide stable and reliable build environments for the different supported platforms, including the obsolete ones which cannot be installed on modern hardware, to be used in integration builds, releases and by any developer. We present here the techniques and procedures set up to define and maintain the Docker images and how these images can be used to develop on modern Linux distributions for platforms otherwise not accessible.

  11. Sustainable building organisation

    NARCIS (Netherlands)

    Schmid, P.

    1998-01-01

    Sustainable Development and Sustainable Building is mainly a question of (human) environmentally-conscious Organisation and Management Criteria are needed in order to capture the best practices in the field. Therefore we developed modells and methods, which help to choose the most adequate

  12. Building Project Competence

    DEFF Research Database (Denmark)

    Pemsel, Sofia; Wiewiora, Anna

    This research investigates the development of project competence, and particularly, three related dynamic capabilities (shifting, adapting, leveraging) that contribute to project competence development. In doing so, we make use of the emerging literature on knowledge governance and theorize how...... of dynamic capability building promoting project competence development....

  13. Building Codes and Regulations.

    Science.gov (United States)

    Fisher, John L.

    The hazard of fire is of great concern to libraries due to combustible books and new plastics used in construction and interiors. Building codes and standards can offer architects and planners guidelines to follow but these standards should be closely monitored, updated, and researched for fire prevention. (DS)

  14. Sick building syndrome

    International Nuclear Information System (INIS)

    Baechler, M.C.; Hadley, D.L.; Marseille, T.J.; Stenner, R.D.; Peterson, M.R.; Naugle, D.F.; Berry, M.A.

    1991-01-01

    This book discusses the aspect of indoor air pollution referred to as sick building syndrome. Covered are sources and health effects of various indoor air pollutants, and methods for mitigation of the problem, plus suggested analytical methods for environmental carcinogens found in indoor air

  15. Building Open in Engineering

    OpenAIRE

    Berg, Devin

    2018-01-01

    A description of ongoing efforts to build a culture for open in engineering. I will overview some of the tools that have been developed to promote open practices in engineering and discuss some of the barriers to adoption within the field.Presented 27 March 2018 at the "E"ffordabilitiy Summit, Menomonie, WI.

  16. Radioactivity in building materials

    International Nuclear Information System (INIS)

    1985-01-01

    The present report, drawn up at the request of the former Minister of Public Health and Environmental Affairs of the Netherlands, discusses the potential radiological consequences for the population of the Netherlands of using waste materials as building materials in housing construction. (Auth.)

  17. Gaze Interactive Building Instructions

    DEFF Research Database (Denmark)

    Hansen, John Paulin; Ahmed, Zaheer; Mardanbeigi, Diako

    We combine eye tracking technology and mobile tablets to support hands-free interaction with digital building instructions. As a proof-of-concept we have developed a small interactive 3D environment where one can interact with digital blocks by gaze, keystroke and head gestures. Blocks may be moved...

  18. Building the quantum network

    International Nuclear Information System (INIS)

    Elliott, Chip

    2002-01-01

    We show how quantum key distribution (QKD) techniques can be employed within realistic, highly secure communications systems, using the internet architecture for a specific example. We also discuss how certain drawbacks in existing QKD point-to-point links can be mitigated by building QKD networks, where such networks can be composed of trusted relays or untrusted photonic switches. (author)

  19. Building a Straw Bridge

    Science.gov (United States)

    Teaching Science, 2015

    2015-01-01

    This project is for a team of students (groups of two or three are ideal) to design and construct a model of a single-span bridge, using plastic drinking straws as the building material. All steps of the design, construction, testing and critiquing stages should be recorded by students in a journal. Students may like to include labelled diagrams,…

  20. Building Automation Systems.

    Science.gov (United States)

    Honeywell, Inc., Minneapolis, Minn.

    A number of different automation systems for use in monitoring and controlling building equipment are described in this brochure. The system functions include--(1) collection of information, (2) processing and display of data at a central panel, and (3) taking corrective action by sounding alarms, making adjustments, or automatically starting and…

  1. Building with History

    DEFF Research Database (Denmark)

    Douglas-Jones, Rachel; Adams, Charlotte; Green, Adrian

    2014-01-01

    Drawing on interdisciplinary research focusing on Durham University estate, we describe how buildings constructed as part of an eighteenth century transition to a high carbon coal-based economy, are used and understood by their current inhabitants. Applied heritage research has tended to focus on...

  2. Buildings behaving badly

    NARCIS (Netherlands)

    Student, Jillian; Papyrakis, Elissaios; Beukering, van Pieter

    2017-01-01

    Heating buildings contributes to approximately 36 % of Europe’s energy demand and several EU member states have adopted mandatory energy labels to improve energy efficiency by promoting home weatherization investments. This paper focuses on the perception of the energy label for residential

  3. Early Building Design

    DEFF Research Database (Denmark)

    Østergård, Torben; Jensen, Rasmus Lund; Maagaard, Steffen

    2017-01-01

    Highlights •Development of a design methodology that can handle the vast design space in early building design. •A global design space is modelled from extensive Monte Carlo simulations. •Sensitivity analysis methods applied to guide decision-makers. •Interactive visualizations help the multi-act...

  4. Tall Buildings Initiative

    Science.gov (United States)

    Initiative 2017 TBI Guidelines Version 2.03 Now Available Screen Shot 2017-10-10 at 3.05.10 PM PEER has just initiative to develop design criteria that will ensure safe and usable tall buildings following future earthquakes. Download the primary product of this initiative: Guidelines for Performance-Based Seismic Design

  5. LARGE BUILDING HVAC SIMULATION

    Science.gov (United States)

    The report discusses the monitoring and collection of data relating to indoor pressures and radon concentrations under several test conditions in a large school building in Bartow, Florida. The Florida Solar Energy Center (FSEC) used an integrated computational software, FSEC 3.0...

  6. Radon in public buildings

    International Nuclear Information System (INIS)

    Schulz, H.; Flesch, K.; Hermann, E.; Loebner, W.; Leissring, B.

    2009-01-01

    From the Free State of Saxony, a study was commissioned to survey how reliable measurements to characterize the radon situation in public buildings at a reasonable financial and human effort can be carried out to reduce radiation exposure in public buildings. The study approach was for 6 objects. To characterize the radon situation the time evolution measurement of radon concentrations of more than 1 to 2 weeks turned out to be sufficient. A novel data analysis enables the identification of a ''typical daily alteration of the radon concentration'' depending on the ventilation conditions and the daily use of the offices or class rooms. The identification of typical diurnal radon variations for the working time and weekends or holidays is of fundamental importance for assessing the exposure situation in public buildings. It was shown that the radon concentration during working time are in general much lower than in the times when the buildings (offices) are unused. It turned out that the long-term radon measurements with nuclear track detectors within distinct time regimes (day / night, working hours / leisure time) by utilizing switch modules are very efficient to estimate the actual exposure. (orig.)

  7. Building a Twig Phylogeny

    Science.gov (United States)

    Flinn, Kathryn M.

    2015-01-01

    In this classroom activity, students build a phylogeny for woody plant species based on the morphology of their twigs. Using any available twigs, students can practice the process of cladistics to test evolutionary hypotheses for real organisms. They identify homologous characters, determine polarity through outgroup comparison, and construct a…

  8. Financing medical office buildings.

    Science.gov (United States)

    Blake, J W

    1995-01-01

    This article discusses financing medical office buildings. In particular, financing and ownership options from a not-for-profit health care system perspective are reviewed, including use of tax-exempt debt, taxable debt, limited partnerships, sale, and real estate investment trusts (REITs).

  9. Deactivation of Building 7602

    International Nuclear Information System (INIS)

    Yook, H.R.; Barnett, J.R.; Collins, T.L.

    1995-10-01

    The Department of Energy (DOE) has sponsored research and development programs in Building 7602 at Oak Ridge National Laboratory (ORNL) since 1984. This work focused on development of advanced technology for processing nuclear fuels. Building 7602 was used for engineering-scale tests using depleted and natural uranium to simulate the nuclear fuel. In April 1994 the DOE Office of Nuclear Energy (NE) sent supplemental FY 1994 guidance to ORNL stating that in FY 1995 and beyond, Building 7602 is considered surplus to NE programs and missions and shall be shut down (deactivated) and maintained in a radiologically and industrially safe condition with minimal surveillance and maintenance (S ampersand M). DOE-NE subsequently provided FY 1995 funding to support the deactivation activities. Deactivation of Building 7602 was initiated on October 1, 1994. The principal activity during the first quarter of FY 1995 was removal of process materials (chemicals and uranium) from the systems. The process systems were operated to achieve chemical solution concentrations needed for reuse or disposal of the solutions prior to removal of the materials from the systems. During this phase of deactivation the process materials processed and removed were: (1) Uranyl nitrate solution 30,178 L containing 4490 kg of uranium; (2) Nitric acid (neutralized) 9850 L containing less than 0.013 kg of uranium; (3) Organic solution 3346 L containing 265 kg of uranium; (4) Uranium oxide powder 95 kg; and (5) Miscellaneous chemicals. At the end of December 1994, the process systems and control systems were shut down and deactivated. Disposition of the process materials removed from the process systems in Building 7602 proved to be the most difficult part of the deactivation. An operational stand down and funding reductions at Y-12 prevented planned conversion of the uranyl nitrate solution to depleted uranium oxide powder. This led to disposal of the uranyl nitrate solution as waste

  10. Switchable insulation for using solar energy in buildings. Final report; Schaltbare Waermedaemmung (SWD) zur Nutzung der Sonnenenergie in Gebaeuden. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Stark, C.; Horn, R.; Hetfleisch, J.; Fricke, J.

    2003-02-25

    Solar energy can be used in buildings via use of transparent insulations. But thereby problems occur, like overheating of building walls in summer and heat losses in the cold season. To solve these problems ZAE Bayern has designed and optimized the switchable insulation SWD, the thermal conductivity of which can be changed from highly insulating to conducting. A computer routine was developed to calculate and to optimize the heat gains. The SWD is switched by desorbing/adsorbing as small amount of hydrogen gas. Desorption is facilitated with an electric heating element. The thermal conductivity of the filling can be varied by about a factor of 40. Several SWD-modules were produced and installed in an outside measuring facility. The heat gains and the durability were investigated for three years. The results of the simulation could be verified and ageing did not occur. For an optimal system the heat gains are in the range of 150 kWh/(m{sup 2}a). The mounting of these panels at south facades is simple, especially for post bolt systems. Contrary to transparent systems the loss of heat in winter is very small and the overheating of the walls behind the SWD in summer can be avoided. (orig.) [German] Zur Nutzung der Sonnenenergie in Gebaeuden werden bisher transparente Waermedaemmsysteme eingebaut, die jedoch oft mit Problemen wie Wandueberhitzung im Sommer und Waermeverlusten in der kalten Jahreszeit behaftet sind. Zur Loesung dieser Probleme wurde am ZAE Bayern eine schaltbare Waermedaemmung entwickelt und optimiert, deren Daemmeigenschaft je nach Sonneneinstrahlung und Waermebedarf variiert werden kann. Es wurde ein Programm entwickelt, mit dem die Waermegewinne berechnet und optimiert werden koennen. Die Schaltbarkeit wird durch einen Getter ermoeglicht, der eine ungefaehrliche Menge Wasserstoffgas reversibel aufnehmen und abgeben kann. Die Wasserstoff-Austreibung erfolgt mittels elektrischer Heizung und veraendert die Waermeleitfaehigkeit der Fuellung um einen

  11. DGNB Building Certification Companion

    DEFF Research Database (Denmark)

    Møller, Renate Skovgaard; Rhodes, Michael K.; Larsen, Tine Steen

    2017-01-01

    for sustainable buildings. The literature describes several barriers of entry preventing actors in the industry from seeking sustainability certifications and prioritizing design methods, supporting sustainability in greater numbers. In the newly developed tool, “DGNB building certification companion: Sustainable......-language, easily digestible summaries of various topics regarding sustainability and the DGNB certification scheme. The identified barriers are described in the tool followed by a solution to overcome them. The tool, tested at multiple stages of development and moulded by many individuals both within and outside...... was that this is a desired product on the market. This new approach is expected to dramatically reduce misunderstandings, conflicts, and mistakes during a sustainable design process, helping the design team plan a project to possibly obtain the highest DGNB score if desired and properly documented....

  12. DGNB BUILDING CERTIFICATION COMPANION

    DEFF Research Database (Denmark)

    Møller, Renate Skovgaard; Rhodes, Michael K.; Larsen, Tine Steen

    2018-01-01

    for sustainable buildings. The literature describes several barriers of entry preventing actors in the industry from seeking sustainability certifications and prioritizing design methods, supporting sustainability in greater numbers. In the newly developed tool, “DGNB building certification companion: Sustainable......-language, easily digestible summaries of various topics regarding sustainability and the DGNB certification scheme. The identified barriers are described in the tool followed by a solution to overcome them. The tool, tested at multiple stages of development and moulded by many individuals both within and outside...... was that this is a desired product on the market. This new approach is expected to dramatically reduce misunderstandings, conflicts, and mistakes during a sustainable design process, helping the design team plan a project to possibly obtain the highest DGNB score if desired and properly documented....

  13. Building and using binoscopes

    CERN Document Server

    Butler, Norman

    2015-01-01

    Focusing on both homemade and commercial products, this book provides the reader with simple and straightforward information about the modelling and building of binoscopes. Binoscopes can be thought of as binoculars enlarged to the size of telescopes: essentially, a combination of the two. Constructing a binoscope is easier than most people think, but it still demands attention to detail and proper background knowledge. The author goes on to provide additional information about how to understand the products currently on the market, should the reader choose to purchase a binoscope instead of building one. Lastly, the book also compares binoscopes with telescopes in great detail, outlining the differences the reader can expect to see in the night sky from using both. The celestial views obtained with a binoscope, compared to a single telescope of the same aperture, are a very different experience and well worth the effort.

  14. Can we build inclusion?

    DEFF Research Database (Denmark)

    Kirkeby, Inge Mette; Grangaard, Sidse

    2016-01-01

    of some children with special needs. Hence the title – can we build inclusion? In the literature of Universal Design, accommodation and design features seldom reflect the less visible disabilities. The paper is based on a research project initiated to investigate how more or less space influences daily......Inclusion of children with special needs in kindergartens and preschools may be approached from different angles. This paper raises the question of whether the physical framework of kindergartens makes any difference for daily life at the kindergarten at all, and whether it can support inclusion...... on the answers in the interviews, we found support for answering the question in the title in the affirmative; we can build inclusion! This is because the teachers' experience indicated that, if there was sufficient space per child, there were fewer conflicts and the children managed to stay in the same activity...

  15. License to build

    International Nuclear Information System (INIS)

    Huntelaar, Mark; Vos, Renate de; Roobol, Lars

    2007-01-01

    Full text: A new license under the nuclear power act is applied for at the Dutch Government for the building of a High Active Repackaging Unit (HAVA-VU in Dutch) at NRG in Petten, The Netherlands. This new building is necessary to comply with our nuclear license to dispose of high active nuclear waste at Petten to the intermediate storage facility (COVRA). In the first part of this paper attention is given to the formal procedure followed by the Government, what type of documents are to be submitted, what time frames are followed, how citizen participation is organized, and as final result a new license. In the second part more detailed information is given about the present license renewal needed for the High Active Repackaging Unit

  16. Building Company Loyalty System

    OpenAIRE

    Haniková, Alžběta

    2010-01-01

    The thesis discusses the importance of loyal customers, and loyalty system as a tool for building loyalty. It defines loyalty and customer satisfaction, it deals with the issue of customer retention. It describes the history and types of loyalty programs, important factors for deciding on their implementation and problems associated with them. The practical part is concerned with the clothing market, Orsay company and its Orsay Club loyalty systeme. The work also includes a survey of the loya...

  17. Mycotoxins in building materials

    DEFF Research Database (Denmark)

    Nielsen, Kristian Fog; Frisvad, Jens Christian

    2011-01-01

    as in future energy efficient buildings. It brings together different disciplinary points of view on indoor mold, ranging from physics and material science to microbiology and health sciences. The contents have been outlined according to three main issues: Fundamentals, particularly addressing the crucial...... roles of water and materials, Health, including a state-of-the-art description of the health-related effects of indoor molds, and Strategies, integrating remediation, prevention and policies....

  18. BALKANS: Building bridges

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    At a time when upheaval and political unrest in some Balkan countries gives cause for concern, it is good to know that physics, once again, is building bridges between nations. The new international mobility in the region was marked by a major activity of the Balkan Physical Union - the first Balkan School of Physics, held on the banks of the Bosphorus during the first two weeks of September

  19. Life between buildings

    DEFF Research Database (Denmark)

    Gehl, Jan

    2001-01-01

    A classic is republished. Life between Buildings was first published in 1971. This book - frequently revised over the years - is still the best source for understanding how people use public spaces in our cities. Published in many languages, it is a standard textbook in Architecture and Planning...... Schools around the world, and continues to be the undisputed basic introduction to the interplay between public space design and social life. This book is now available in its third English language version....

  20. Surfaces of Building Practice

    OpenAIRE

    Surynková, Petra

    2009-01-01

    My diploma thesis Surfaces of Building Practice deals with the basic properties of surfaces, their mathematical description, categorization, and application in technical practice. Each studied surface is defined and its process of construction and parametrical description is listed. The thesis studies selected types of surfaces in details - these surfaces include surfaces of revolution, ruled surfaces, screw surfaces, and translational surfaces. An application of each studied surfaces is show...

  1. Building our stories

    DEFF Research Database (Denmark)

    Tourism transforms people and places. New stakeholders are emerging, landscapes of power are shifting, and lines of responsibilities are being redrawn. Everyday stories of coping, success, empowerment, nurturing, relationship building and activism are important tools for reflection and learning...... for our first TEFI regional conference. Storytelling is a powerful way of exploring, linking and crafting values, articulating them is such a way as to instil action. This conference proceedings assembles 31research stories of sustainable, caring and ethical worldmaking in tourism....

  2. Work at Building 513

    CERN Document Server

    IT Department

    2006-01-01

    As part of IT's preparations to meet the challenge of LHC computing, a new chilled water production unit is being constructed for the Computer Centre. The air conditioning work will start in mid-January and last until June 2006. During this period access to the car park of Building 513 will be restricted. Please consult the plan for details of the area affected by the work. With apologies for the inconvenience, IT Department

  3. Work at Building 513

    CERN Document Server

    IT Department

    2006-01-01

    As part of IT's preparations to meet the challenge of LHC computing, a new chilled water production unit is being constructed for the Computer Centre. The air conditioning work will start in mid-January and last until June 2006. During this period, access to the car park of Building 513 will be restricted. Please consult the plan for details of the area affected by the work. With apologies for the inconvenience. IT Department

  4. BUILDING e-CLUSTERS

    OpenAIRE

    Milan Davidovic

    2013-01-01

    E-clusters are strategic alliance in TIMES technology sector (Telecommunication, Information technology, Multimedia, Entertainment, Security) where products and processes are digitalized. They enable horizontal and vertical integration of small and medium companies and establish new added value e-chains. E-clusters also build supply chains based on cooperation relationship, innovation, organizational knowledge and compliance of intellectual properties. As an innovative approach for economic p...

  5. BUILD UP Skills Danmark

    DEFF Research Database (Denmark)

    Forsingdal, Charlotte Vartou; Lauridsen, Vagn Holk; Hougaard, Karsten Frøhlich

    opfyldelsen af 2020-målene, skal de rette kompetencer inden for energief-fektivitet og brug af vedvarende energi være til stede blandt de udførende i bygge- og an-lægsbranchen. Det er på denne baggrund, at Europa-Kommissionen har igangsat Build Up Skills projektet på tværs af Europa. Formålet med denne...

  6. NRC new sustainable building

    International Nuclear Information System (INIS)

    Semczyszyn, D.

    2004-01-01

    'Full text:' The National Research Council Institute For Fuel Cell Innovation is relocating to a purpose-built 71,343 sq. Ft. (6598 sq. M) Research, Testing, Evaluation, and Industry Incubation Facility in the spring of 2006. The new facility will contain Hydrogen-ready laboratories, the existing relocated Hydrogen Safe Environmental Test Chamber, a hydrogen vehicle maintenance bay, a hydrogen vehicle refuelling station, and the following demonstration projects and features: 1. A Ground Source Heat Pump: This long-proven natural-source heating and cooling technology to provide climate control for the new IFCI's atrium and galleria. It is being designed by Keen Engineering of North Vancouver, BC. 2. 5 KW Solid Oxide Fuel Cell System: Fuelled by natural gas and in the future, from biomass, the fuel cell will also produce approximately 15 kW of waste heat, which will be captured and used to supply heat for the building. The Solid Oxide Fuel Cell will be supplied by Fuel Cell Technologies in Kingston, ON. 3. LEED Building certification: Attaining LEED 'green building' certification is considered an important complement to the plans for the new NRC-IFCI, because it will provide respected third-party verification of government's commitment to efficient building design and construction. Project architects Bunting Coady of Vancouver, BC believe the IFCI has strong potential to earn gold LEED certification. 4. Photovoltaic hydrogen source for back-up power fuel cell system: A photovoltaic array will capture energy from sunlight to power an electrolyzer that will produce and store hydrogen for a PEM fuel cell emergency backup power system. The electrolyzer will be provided by Hydrogenics of Mississauga, ON. Photovoltaics are being designed and installed by the British Columbia Institute of Technology. (author)

  7. Public building retrofit

    Energy Technology Data Exchange (ETDEWEB)

    1982-01-01

    This report demonstrates the economic viability of cost effective, energy efficient retrofitting of a public building. The Whitehorse Chamber of Commerce in conjunction with the Canada/Yukon Conservation and Renewable Energy Demonstration Project undertook the demonstration project. The energy conservation features included increasing the insulation in the walls and ceiling, providing a 6 mm polyethylene air-vapour barrier and installing triple glazed windows on the north side. Also, an air-to-air heat exchanger and a combination wood/oil furnace were installed. However, neither of these latter features have been used since the completion of the renovations. In total, the features cost approximately $26,300. The energy conservation measures yielded less energy savings than expected. Although the T.C. Richard building is now consuming less heating oil (33% less); the amount of electricity used has increased by 146.6%. Overall the building achieved a 23% reduction in heating consumption (this figure takes into account the heat energy generated from the lighting system). Reasons for the low yield in energy savings can be attributed to the improper installation of the air-vapour barrier and not using the existing wood boiler. 1 fig. 5 tabs.

  8. Sick building syndrome

    Energy Technology Data Exchange (ETDEWEB)

    Eyre, S

    1990-10-01

    Recently, there has been an upsurge in public awareness about the hazards of indoor air pollution. It is documented that respiratory tract infections, a common result of poor air quality, account for approximately 150 million lost work days, $15-billion of direct medical costs, and at least $59-billion of indirect costs of absenteeism per year. Indoor air pollutants result from a number of different sources including common office supplies and equipment, cleaning supplies, pesticides, clothing, furnishings, draperies and carpets. A recent summary of findings by Healthy Buildings International has found the three most common problems to be: poor ventilation, inadequate filtration and lack of hygiene. Only 25% of the buildings studied were well ventilated and 75% of the problems with contaminated air were due to ignorance of correct operating practices. Currently, there are no uniformly accepted regulations for environmental quality in buildings in Canada. Some approaches to this problem are discussed and it is noted that the solution to indoor air quality problems is prevention or proactive monitoring. The key to a successful monitoring program is that improvements made by implementing remedial actions can be quantified, and to place the focus of the program on the ventilation system. 1 fig.

  9. Nuclear reactor building

    International Nuclear Information System (INIS)

    Oshima, Nobuaki.

    1991-01-01

    The secondary container in a nuclear reactor building is made of a transparent structure having a shielding performance such as lead glass, by which the inside of the secondary container can be seen without undergoing radiation exposure. In addition, an operator transportation facility capable of carrying about 5 to 10 operators at one time is disposed, and the side of the facility on the secondary container is constituted with a transparent material such as glass, to provide a structure capable of observing the inside of the secondary container. The ventilation and air conditioning in the operator's transportation facility is in communication with the atmosphere of a not-controlled area. Accordingly, operators at the outside of the reactor building can reach the operator's transportation facility without taking and procedures for entering the controlled area and without undergoing radiation exposure. The inside of the secondary container in the reactor building can be seen from various directions through the transparent structure having the shielding performance. (N.H.)

  10. Building Performance Simulation for Sustainable Energy Use in Buildings

    NARCIS (Netherlands)

    Hensen, J.L.M.

    2010-01-01

    This paper aims to provide a general view of the background and current state of building performance simulation, which has the potential to deliver, directly or indirectly, substantial benefits to building stakeholders and to the environment. However the building simulation community faces many

  11. Building performance simulation for sustainable building design and operation

    NARCIS (Netherlands)

    Hensen, J.L.M.

    2011-01-01

    This paper aims to provide a general view of the background and current state of building performance simulation, which has the potential to deliver, directly or indirectly, substantial benefits to building stakeholders and to the environment. However the building simulation community faces many

  12. Energy pole system in the new building of the PAGO AG, Grabs (CH); Energiepfahlsystem im Neubau der PAGO AG, Grabs (CH)

    Energy Technology Data Exchange (ETDEWEB)

    Scheuss, U [NDS-HTL, Ingenieurbuero Lippuner und Partner AG, Grabs (Switzerland)

    1997-12-01

    With 570 concrete poles and 80 km of tubes, 100,000 m{sup 3} of ground serve as a cold and heat storage resservoir for a building. The building houses a printing shop, which needs cooling in summer and heating in winter. The energy pole system can be used as a dual system for heating and cooling in both seasons. The project is a pilot project of the BWE (Swiss General Office for Utilities and Power Supply), who also started an extensive accompanying measurig campaign. The results during the first year of operation were very positive, and the performance of the energy pole system was up to expectations. (orig.) [Deutsch] Mittelpunkt der PAGO-Energietechnik ist das Energiepfahlsystem. Mittels 570 Betonpfaehlen und 80 km Rohrschlangen wird das Erdreich unter dem Gebaeude als ueber 100.000 m{sup 3} grosser Waerme- und Kaeltespeicher genutzt. Ueber dieses Energiepfahlsystem wird dieser Druckereibetrieb mit hohen Anforderungen an das Raumklima und viel Maschinenabwaerme sehr umweltschonend im Winter behizt und im Sommer gekuehlt. Das Besondere an diesem System ist diese ganzjaehrige Doppelnutzung zu Heiz- und Kuehlzwecken. Aus diesem Grunde wurde dieses Projekt vom Bundesamt fuer Energiewirtschaft (BEW) als Pilot- und Demonstrationsprojekt anerkannt. Zur Ueberpruefung von dessen Ausbeute und der Wirksamkeit der gesamten Energietechnik wurde vom BEW ein umfangreiches Messprojekt gestartet. Der Innovationswert der PAGO -Energietechnik liegt allerdings nicht allein im Einsatz der alternativen Komponenten. Mindestens so wichtig ist die Konzeption und die Feinabstimmung der gesamten Energietechnik. Der Betrieb lief im ersten Betriebsjahr sehr positiv und von Anfang an ohne groessere Probleme. Das Energiepfahlsystem konnte im wesentlichen die Erwartungen erfuellen. (orig.)

  13. BUILDING "BRIDGES" WITH QUALITY ASSURANCE

    Science.gov (United States)

    The papr describes how, rather than building "bridges" across centuries, quality assurance (QA) personnel have the opportunity to build bridges across technical disciplines, between public and private organizations, and between different QA groups. As reviewers and auditors of a...

  14. Allegheny County Building Footprint Locations

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — This dataset contains photogrammetrically compiled roof outlines of buildings. All near orthogonal corners are square. Buildings that are less than 400 square feet...

  15. Field test measurements and system optimisation at a solar operated DEC ventilation system at industrial use; Feldtest-Messungen und Systemoptimierung an einer solarbetriebenen DEC-Klimatisierungsanlage im industriellen Einsatz

    Energy Technology Data Exchange (ETDEWEB)

    Bader, Tobias; Finkenzeller, Michael; Trinkl, Christoph; Zoerner, Wilfried [Hochschule Ingolstadt (Germany). Kompetenzfeld Erneuerbare Energien

    2010-07-01

    The field of competence for renewable energy at the Ingolstadt University (Federal Republic of Germany) examines and optimizes an innovative, solar powered air conditioning system with DEC technology (DEC = Desiccant and Evaporative Cooling) in a multi-functional industrial buildings. In addition to a geothermal heat pump system for basic energy supply of heating and cooling, the building is fitted with two solar thermal solar collector panels and a sorption supported air conditioning system. This air conditioner consists of two units, each with a nominal air flow of 8,000 m{sup 3} per hour. The two solar collector panels provide the heat necessary for the regeneration of the sorption rotors and support the domestic preparation of hot water.

  16. Radon: the building industry view

    International Nuclear Information System (INIS)

    Farnham, K.G.R.

    1992-01-01

    Guidance on radon preventive measures in new dwellings is covered by the Building Regulations, and adequate guidance has been published by the Building Research Establishment. This is a satisfactory state of affairs which, unfortunately, is not the case for remedial work in existing buildings. Work in existing buildings should be incorporated in Regulations and adequate funding should be provided by government for the training of builders. (Author)

  17. Hawaii-Okinawa Building Evaluations

    Energy Technology Data Exchange (ETDEWEB)

    Metzger, I.; Salasovich, J.

    2013-05-01

    NREL conducted energy evaluations at the Itoman City Hall building in Itoman, Okinawa Prefecture, Japan, and the Hawaii State Capitol building in Honolulu, Hawaii. This report summarizes the findings from the evaluations, including the best practices identified at each site and opportunities for improving energy efficiency and renewable energy. The findings from this evaluation are intended to inform energy efficient building design, energy efficiency technology, and management protocols for buildings in subtropical climates.

  18. Heat loads of transparent construction elements and sun shading systems; Waermelasten transparenter Bauteile und Sonnenschutzsysteme

    Energy Technology Data Exchange (ETDEWEB)

    Simmler, H; Binder, B; Vonbank, R

    2000-07-01

    This report for the Swiss Federal Office of Energy (SFOE) describes a test system installed at the Swiss Federal Laboratories for Materials Testing and Research (EMPA) in Duebendorf, Switzerland, for the investigation of heat gain by glazing elements often used in modern architecture and the efficiency of shading elements. The two climatically controlled test cells for the measurement of the thermal characteristics of facade elements and shading systems are described and the results of measurements made using various types of glazing and shading systems - including external and internal lamellas, blinds and extendible fabric sunshades - are presented. The results are analysed and interpreted in a comprehensive appendix.

  19. Building Materials in Arctic Climate

    DEFF Research Database (Denmark)

    Jensen, Ole Mejlhede

    2005-01-01

    Building in the artic requires special attention on the appropriateness of building materials. The harsh climate makes execution difficult and sets unusual requirements for the pure material properties. In addition, there is a lack of choice of good, natural building materials in the arctic...

  20. Green Building Adoption Index 2017

    NARCIS (Netherlands)

    Kok, Nils

    2017-01-01

    In the early 2000s, energy efficiency was for the committed few, and “green” building was a niche concept. But with the advent of strong tenant and investor interest in constructing, operating, and occupying better buildings, the concept of energy efficiency and sustainability in buildings has taken

  1. Educational Dimensions of School Buildings

    Science.gov (United States)

    Bengtsson, Jan, Ed.

    2011-01-01

    In all modern societies almost everyone of their citizens have spent many years in school buildings, and the largest professional group in modern societies, teachers, is working every day during the working year in school buildings. In spite of this, we know surprisingly little about the influence of school buildings on the people who use them and…

  2. Compliance with building energy regulations for new-build dwellings

    International Nuclear Information System (INIS)

    Pan, Wei; Garmston, Helen

    2012-01-01

    Despite increasingly stringent building energy regulations worldwide, non-compliance exists in practice. This paper examines the profile of compliance with building energy regulations for new-build dwellings. In total 404 new-build dwellings completed in the UK from 2006 to 2009 were investigated. Only a third of these dwellings were evidenced as being compliant with Building Regulations Part L (England and Wales). Such low compliance casts a serious concern over the achievability of the UK Government's target for all new-build homes to be ‘zero carbon’ from 2016. Clearly evidenced was a lack of knowledge of Part L and its compliance requirements among the supply and building control sides of new-build dwellings. The results also indicate that the compliance profile was influenced by factors including Standard Assessment Procedure (UK Government's methodology for energy efficiency) calculation submissions, learning and experience of builders and building controls with Part L, use of Part L1A checklist, the introduction of energy performance certificate (EPC), build method, dwelling type, and project size. Better compliance was associated with flats over houses and timber frame over masonry. The use of EPC and Part L1A checklist should be encouraged. Key to addressing the lack of compliance with building energy regulations is training. -- Highlights: ► There exists a lack of compliance, worldwide, with building energy regulations. ► The implementation of England and Wales building energy regulations is problematic. ► Training, learning and experience of builders and building control are critical. ► Energy performance certificate and Part L 2006 checklist helped achieve compliance. ► Flats achieved better compliance over houses; and timber frame over masonry.

  3. Building a leadership brand.

    Science.gov (United States)

    Ulrich, Dave; Smallwood, Norm

    2007-01-01

    How do some firms produce a pipeline of consistently excellent managers? Instead of concentrating merely on strengthening the skills of individuals, these companies focus on building a broad organizational leadership capability. It's what Ulrich and Smallwood--cofounders of the RBL Group, a leadership development consultancy--call a leadership brand. Organizations with leadership brands take an "outside-in" approach to executive development. They begin with a clear statement of what they want to be known for by customers and then link it with a required set of management skills. The Lexus division of Toyota, for instance, translates its tagline--"The pursuit of perfection"--into an expectation that its leaders excel at managing quality processes. The slogan of Bon Secours Health System is "Good help to those in need." It demands that its managers balance business skills with compassion and caring. The outside-in approach helps firms build a reputation for high-quality leaders whom customers trust to deliver on the company's promises. In examining 150 companies with strong leadership capabilities, the authors found that the organizations follow five strategies. First, make sure managers master the basics of leadership--for example, setting strategy and grooming talent. Second, ensure that leaders internalize customers' high expectations. Third, incorporate customer feedback into evaluations of executives. Fourth, invest in programs that help managers hone the right skills, by tapping customers to participate in such programs. Finally, track the success of efforts to build leadership bench strength over the long-term. The result is outstanding management that persists even when individual executives leave. In fact, companies with the strongest leadership brands often become "leader feeders"--firms that regularly graduate leaders who go on to head other companies.

  4. Refurbishment of industrial buildings

    International Nuclear Information System (INIS)

    Gustafsson, Stig-Inge

    2006-01-01

    When a building is subject for refurbishment, there is a golden opportunity to change its behavior as an energy system. This paper shows the importance of careful investigations of the processes, the climate shield and the heating systems already present in the building before measures are implemented in reality. A case study is presented dealing with a carpentry factory. The building is poorly insulated according to standards today, and initially it was assumed that a better thermal shield would be of vital importance in order to reach optimal conditions. Instead, it is shown that the main problem is the ordinary heating system. This uses steam from a wood chips boiler and the wood chips come from the manufacturing processes. These wood chips are, therefore, a very cheap fuel. The boiler had, during decades of use, slowly degraded into a poor state. Hence, aero-tempers using expensive electricity have been installed to remedy the situation. These use not only expensive kWh but also very expensive kW due to the electricity tariff. It is shown that electricity for heating purposes must be abandoned and further, that this could be achieved at a surprisingly small cost. By stopping a large waste of steam, it was possible to find resources, in the form of unspent money, for further mending the existing heating system. Not only economy but also environmental hazards in the form of CO 2 emissions urges us to abandon electricity and instead use heat from cheap biomass fired boilers. Such equipment saves environment at the same time it saves money

  5. Foundation helps refurbish buildings

    International Nuclear Information System (INIS)

    Camenzind, B.

    2006-01-01

    This article looks at the activities of the Swiss 'Climate-Cent' foundation, which is helping support the energetic refurbishment of building envelopes. The conditions which have to be fulfilled to receive grants are explained. Work supported includes the replacement of windows and the insulation of roofs and attics as well as outside walls. Details on the financial support provided and examples of projects supported are given. The source of the finance needed to provide such support - a voluntary levy on petrol - and further support provided in certain Swiss cantons is commented on

  6. Building perservation practice

    DEFF Research Database (Denmark)

    Pilegaard, Marie Kirstine

    Cultural Heritage sites are in the current practice, defined as everything you find on a site within a delimited selected area. Written sources and guidelines for the preservation of the cultural heritage, written by the public authorities or professionals describe them as places that tell a story...... of architects and planners is primarily to reconcile the conservation prospects with the future use of buildings and sites. They intermediary the site through selections of the narratives, and in practice the restoration or transformation projects becomes a communication of the selected story, utilized...

  7. Sustainable building; Duurzaam bouwen

    Energy Technology Data Exchange (ETDEWEB)

    Hendriks, Ch.F. [ed.] [Interfacultair Onderzoek Centrum ' De Ecologische Stad' DIOC, Delft (Netherlands)

    1999-07-01

    A complete overview is given of starting points and targets for the sustainable construction of buildings. The notion of sustainable indicates the necessity of managing specific flows: materials, energy, water and transport (traffic). Also, the monitoring and calculation of environmental effects must be clarified by the generally accepted method of life cycle analysis. This book is for the larger part the result of research carried out at the Interdepartmental Research Centre 'The Ecological City' at the Delft University of Technology in Delft, Netherlands. refs.

  8. Building Regional Competencies

    DEFF Research Database (Denmark)

    Norus, Jesper

    2004-01-01

    This paper analyzes the foundations of regional knowledge and its long-term impact onthe region's companies' and how a particular knowledge has developed an ability tostay competitive within a specific technological field. The case illustrates how theCopenhagen region has been able to develop...... a dominating position in the global marketfor industrial enzymes from 1870-2004. The case of industrial enzymes shows how aregion has been able to build sustainable competitive advantages from its distinctivecompetencies. This is done through a mixture of outsourcing and in sourcing ofcompetencies, knowledge...

  9. Building Brands Together

    DEFF Research Database (Denmark)

    Ind, Nicholas; Iglesias, Oriol; Schultz, Majken

    2013-01-01

    created an online brand community. Our findings show that people participate in a community because it offers them the chance to find fulfillment, to express their creativity, and to socialize. The findings have significant implications for marketing, branding, and research professionals because......Co-creation is a rapidly emerging area of research. However, there is a lack of understanding as to how organizations use co-creation to build relationships and generate value. How does participation emerge and what outcomes does it deliver? To generate insight into the co-creation process, we...

  10. Building Transdisciplinary Environmental Studies

    DEFF Research Database (Denmark)

    Holm, Jesper

    We will in this paper approach the challenge of building integrated environmental studies by presenting a crude frame of analysis which take into account both the physical aspects and the social-discursive articulations of environmental problems. This framework partly mirrors the approach of our...... department (Dept. of Environment, Technology and Social Studies, Roskilde University), and has originally in another version been presented in the book “Miljøregulering - tværvidenskabelige studier (Environmental Regulation. Interdisciplinary Studies)” (Holm, Kjærgård & Pedersen eds. 1997, in Danish) written...

  11. Building the universe

    International Nuclear Information System (INIS)

    Sutton, Christine

    1985-01-01

    The book 'In Building the Universe' contains a collection of articles from the magazine 'New Scientist', compiled and edited to provide an overview of the field of particle physics. A picture of the basic constituents of matter (quarks and leptons) is given, together with the four fundamental forces that hold them together. The operation of these forces in the first instance of the hot young Universe is described. Also, the development of the accelerators and detectors used in elementary particle physics, is discussed. (UK)

  12. Building doctoral ecologies

    DEFF Research Database (Denmark)

    Bengtsen, Søren Smedegaard

    2018-01-01

    heavily from the support from informal and extra-curricular researcher communities and non-formal support systems even beyond the institution in the private and societal lifeworlds. The chapter describes and analyses such forms of organizational and existential darkness within doctoral education...... and professionalization of doctoral education, with Graduate schools increasing in size and organizational complexity. Paradoxically, we see in contemporary research into doctoral students’ learning experiences that the students do not favour the formalized support systems and supervision, but on the contrary draw most......, and discusses how institutions and doctoral programmes could use such sprawling spaces for learning to build doctoral ecologies and to strengthening existentially based pedagogies within doctoral education....

  13. Radioactivity in building materials

    International Nuclear Information System (INIS)

    Stranden, E.

    1979-01-01

    The object of this brief report is to make the pollution inspectorate aware of the radiation hazards involved in new building materials, such as gypsum boards and alum slate based concrete blocks whose radium content is high. Experience in Swedish housebuilding has shown that a significant increase in the radiation dose to the occupants can occur. Improved insulation and elimination of draughts in fuel conservation accentuate the problem. Norwegian investigations are referred to and OECD and Scandinavian discussions aiming at recommendations and standards are mentioned. Suggested measures by the Norwegian authorities are given. (JIW)

  14. Building Web Reputation Systems

    CERN Document Server

    Farmer, Randy

    2010-01-01

    What do Amazon's product reviews, eBay's feedback score system, Slashdot's Karma System, and Xbox Live's Achievements have in common? They're all examples of successful reputation systems that enable consumer websites to manage and present user contributions most effectively. This book shows you how to design and develop reputation systems for your own sites or web applications, written by experts who have designed web communities for Yahoo! and other prominent sites. Building Web Reputation Systems helps you ask the hard questions about these underlying mechanisms, and why they're critical

  15. The Structure of Affine Buildings

    CERN Document Server

    Weiss, Richard M

    2009-01-01

    In The Structure of Affine Buildings, Richard Weiss gives a detailed presentation of the complete proof of the classification of Bruhat-Tits buildings first completed by Jacques Tits in 1986. The book includes numerous results about automorphisms, completions, and residues of these buildings. It also includes tables correlating the results in the locally finite case with the results of Tits's classification of absolutely simple algebraic groups defined over a local field. A companion to Weiss's The Structure of Spherical Buildings, The Structure of Affine Buildings is organized around the clas

  16. Geomatics applied to building management

    International Nuclear Information System (INIS)

    Gascon, M.

    1998-01-01

    An integrated information system at an educational facility which has the capacity to monitor relative data pertaining to the spatial characteristics of a building was demonstrated. The system was instrumental in optimizing building management by making use of geomatics technology. Geomatics establishes relations between geo-reference data (plans) and an actual data base. Such a system has the capability to integrate and assess all data relative to building management. The information allows building managers to rationalize exploitation costs and to coordinate energy use with the activities in the building

  17. Building and using binoscopes

    CERN Document Server

    Butler, Norman

    2017-01-01

    Covering both homemade and commercial products, this book provides the reader with simple and straightforward information about the modeling, building, and use of binoscopes. Binoscopes can be thought of as binoculars enlarged to the size of telescopes - essentially, a combination of the two.  Constructing a binoscope is easier than most people think, but it still demands attention to detail and proper background knowledge. The author goes on to provide additional information about the products currently on the market, should the reader choose to purchase one instead of building it. Lastly, the book also compares binoscopes with telescopes in great detail, outlining the differences the reader can expect to see in the night sky from using both. The celestial views obtained with a binoscope, compared to a single telescope of the same aperture, are a very different experience. The new edition emphasizes the obvious advantages of viewing celestial objects through a binoscope. There are also many new photo...

  18. Building safeguards infrastructure

    International Nuclear Information System (INIS)

    Stevens, Rebecca S.; McClelland-Kerr, John

    2009-01-01

    Much has been written in recent years about the nuclear renaissance - the rebirth of nuclear power as a clean and safe source of electricity around the world. Those who question the nuclear renaissance often cite the risk of proliferation, accidents or an attack on a facility as concerns, all of which merit serious consideration. The integration of these three areas - sometimes referred to as 3S, for safety, security and safeguards - is essential to supporting the growth of nuclear power, and the infrastructure that supports them should be strengthened. The focus of this paper will be on the role safeguards plays in the 3S concept and how to support the development of the infrastructure necessary to support safeguards. The objective of this paper has been to provide a working definition of safeguards infrastructure, and to discuss xamples of how building safeguards infrastructure is presented in several models. The guidelines outlined in the milestones document provide a clear path for establishing both the safeguards and the related infrastructures needed to support the development of nuclear power. The model employed by the INSEP program of engaging with partner states on safeguards-related topics that are of current interest to the level of nuclear development in that state provides another way of approaching the concept of building safeguards infrastructure. The Next Generation Safeguards Initiative is yet another approach that underscored five principal areas for growth, and the United States commitment to working with partners to promote this growth both at home and abroad.

  19. Building GUTs from strings

    International Nuclear Information System (INIS)

    Aldazabal, G.; Ibanez, L.E.; Uranga, A.M.

    1996-01-01

    We study in detail the structure of Grand Unified Theories derived as the low-energy limit of orbifold four-dimensional strings. To this aim, new techniques for building level-two symmetric orbifold theories are presented. New classes of GUTs in the context of symmetric orbifolds are then constructed. The method of permutation modding is further explored and SO(10) GUTs with both 45- or 54-plets are obtained. SU(5) models are also found through this method. It is shown that, in the context of symmetric orbifold SO(10) GUTs, only a single GUT Higgs, either a 54 or a 45, can be present and it always resides in an order-two untwisted sector. Very restrictive results also hold in the case of SU(5). General properties and selection rules for string GUTs are described. Some of these selection rules forbid the presence of some particular GUT-Higgs couplings which are sometimes used in SUSY-GUT model building. Some semi-realistic string GUT examples are presented and their properties briefly discussed. (orig.)

  20. ORGANIZATIONAL STRUCTURE FOR RECONSTRUCTION OF BUILDINGS HISTORICAL BUILDING OF ODESSA

    Directory of Open Access Journals (Sweden)

    POSTERNAK I. М.

    2017-05-01

    Full Text Available Summary. Raising of problem. As one of perspective forms of integration various complexes act in town- planning structure. In the course of formation of plans of social and economic development of large cities even more often there is a situation when for increase of efficiency of used resources concentration of efforts is necessary not simply, but also new progressive forms of the organization of building manufacture. Purpose. To offer the organizational structure using in practice the saved up scientific and technical potential for reconstruction of buildings of historical building of Odessa 1820 … 1920 years under standards power efficiency and to execute researches engineering architectonics residential buildings of historical building of a city of Odessa. Conclusion. It is offered to create in the city of Odessa "the Corporate scientific and technical complex town-planning power reconstruction "CSTC T-PPR", as innovative organizational structure which uses in practice the saved up scientific and technical potential for reconstruction of buildings of historical building of Odessa under standards power efficiency. It is considered engineering architectonics residential buildings of historical building of a city of Odessa, in particular, not looking on diverse buildings of inhabited appointment of Odessa, for them there are defining factors on which probably to make their grouping and at the same time to allocate the general lines inherent to a housing estate as a whole. It is resulted a general characteristic and classification of residential buildings of historical building of a city of Odessa ХІХ beginnings ХХ centuries It is allocated and expanded classification of such buildings of inhabited appointment by duration of residing at them.

  1. ORGANIZATIONAL STRUCTURE FOR BUILDINGS RECONSTRUCTION OF HISTORICAL BUILDING OF ODESSA

    Directory of Open Access Journals (Sweden)

    POSTERNAK I. М.

    2016-12-01

    Full Text Available Formulation of the problem. As one of perspective forms of integration various complexes act in town-planning structure. In the course of formation of plans of social and economic development of large cities even more often there is a situation when for increase of efficiency of used resources concentration of efforts is necessary not simply, but also new progressive forms of the organization of building manufacture. Purpose. To offer the organizational structure using in practice the saved up scientific and technical potential for reconstruction of buildings of historical building of Odessa 1820 … 1920 years under standards power efficiency and to execute researches engineering architectonics residential buildings of historical building of a city of Odessa. Conclusion. It is offered to create in the city of Odessa "the Corporate scientific and technical complex town-planning power reconstruction "CSTC T-PPR", as innovative organizational structure which uses in practice the saved up scientific and technical potential for reconstruction of buildings of historical building of Odessa under standards power efficiency. It is considered engineering architectonics residential buildings of historical building of a city of Odessa, in particular, not looking on diverse buildings of inhabited appointment of Odessa, for them there are defining factors on which probably to make their grouping and at the same time to allocate the general lines inherent to a housing estate as a whole. It is resulted a general characteristic and classification of residential buildings of historical building of a city of Odessa ХІХ … beginnings ХХ centuries It is allocated and expanded classification of such buildings of inhabited appointment by duration of residing at them.

  2. Structural building screening and evaluation

    Science.gov (United States)

    Kurniawandy, Alex; Nakazawa, Shoji; Hendry, Andy; Ridwan, Firdaus, Rahmatul

    2017-10-01

    An earthquake is a disaster that can be harmful to the community, such as financial loss and also dead injuries. Pekanbaru is a city that located in the middle of Sumatera Island. Even though the city of Pekanbaru is a city that rarely occurs earthquake, but Pekanbaru has ever felt the impact of the big earthquake that occurred in West Sumatera on September 2009. As we know, Indonesia located between Eurasia plate, Pacific plate, and Indo-Australian plate. Particularly the Sumatera Island, It has the Semangko fault or the great Sumatra fault along the island from north to south due to the shift of Eurasia and Indo-Australian Plates. An earthquake is not killing people but the building around the people that could be killing them. The failure of the building can be early prevented by doing an evaluation. In this research, the methods of evaluation have used a guideline for the Federal Emergency Management Agency (FEMA) P-154 and Applied Technology Council (ATC) 40. FEMA P-154 is a rapid visual screening of buildings for potential seismic hazards and ATC-40 is seismic evaluation and retrofit of Concrete Buildings. ATC-40 is a more complex evaluation rather than FEMA P-154. The samples to be evaluated are taken in the surroundings of Universitas Riau facility in Pekanbaru. There are four buildings as case study such as the rent student building, the building of mathematics and natural science faculty, the building teacher training and education faculty and the buildings in the faculty of Social political sciences. Vulnerability for every building facing an earthquake is different, this is depending on structural and non-structural components of the building. Among all of the samples, only the building of mathematics and the natural science faculty is in critical condition according to the FEMA P-154 evaluation. Furthermore, the results of evaluation using ATC-40 for the teacher training building are in damage control conditions, despite the other three buildings are

  3. Building energy governance in Shanghai

    Science.gov (United States)

    Kung, YiHsiu Michelle

    With Asia's surging economies and urbanization, the region is adding to its built environment at an unprecedented rate, especially those population centers in China and India. With numerous existing buildings, plus a new building boom, construction in these major Asian cities has caused momentous sustainability challenges. This dissertation focuses on China's leading city, Shanghai, to explore and assess its existing commercial building energy policies and practices. Research estimates that Shanghai's commercial buildings might become a key challenge with regard to energy use and CO2 emissions as compared to other major Asian cities. Relevant building energy policy instruments at national and local levels for commercial buildings are reviewed. In addition, two benchmarks are established to further assess building energy policies in Shanghai. The first benchmark is based on the synthesis of relevant criteria and policy instruments as recommended by professional organizations, while the second practical benchmark is drawn from an analysis of three global cities: New York, London and Tokyo. Moreover, two large-scale commercial building sites - Shanghai IKEA and Plaza 66 - are selected for investigation and assessment of their efforts on building energy saving measures. Detailed building energy savings, CO2 reductions, and management cost reductions based on data availability and calculations are presented with the co-benefits approach. The research additionally analyzes different interventions and factors that facilitate or constrain the implementation process of building energy saving measures in each case. Furthermore, a multi-scale analytical framework is employed to investigate relevant stakeholders that shape Shanghai's commercial building energy governance. Research findings and policy recommendations are offered at the close of this dissertation. Findings and policy recommendations are intended to facilitate commercial building energy governance in Shanghai and

  4. Building Brand Power

    Science.gov (United States)

    Lakshmi, S.; Muthumani, S., Dr.

    2017-05-01

    Brand power is established through brand awareness. It’s all about making consumers familiar about their products and services. Marketing strategies should make the customers extend the positive approach towards brand and continue through repeated purchases. There is a triple perspective approach to investigate the brand awareness in this research. The brand awareness and brand equity are studied and the relationship between those are analyzed. This also drills down about the brand performance and knowledge with awareness which tries to find out the brands value and utility among the public. Continuous improvement on package design, quality and buying experience will lead to customer loyalty and preference. Branding should happen though creative ads, eye catchers and special campaigns. Brand awareness is the extent to which consumers are familiar with their product or services. Power of a brand is resides in the minds of the customers. To build a strong brand, it is one of the great challenge for the marketers to ensure that customers have the right experiences with products and services and various marketing programs. So that tenderness, beliefs, perspective, perception and so on linked to the brand. If we are presenting the brand with no enthusiasm or spunk, people are going to forget about our brand. Even though that may seem harsh, it’s the naked truth in today’s marketing world. Brand must reach out to the community by special events, creating campaigns to keep the brand relevant also offer customer a unique experience. Here we study about the brand consciousness and to identify the cohesion between brand awareness with knowledge and performance and also to assess the effect of brand awareness on consumer purchase. In this study we necessary statistical tools like chi-square test ad t-test has been used to analyse the collected data. It is highly recommend to increase brand awareness, the marketers are constantly required to build brand awareness both

  5. Irregular Shaped Building Design Optimization with Building Information Modelling

    Directory of Open Access Journals (Sweden)

    Lee Xia Sheng

    2016-01-01

    Full Text Available This research is to recognise the function of Building Information Modelling (BIM in design optimization for irregular shaped buildings. The study focuses on a conceptual irregular shaped “twisted” building design similar to some existing sculpture-like architectures. Form and function are the two most important aspects of new buildings, which are becoming more sophisticated as parts of equally sophisticated “systems” that we are living in. Nowadays, it is common to have irregular shaped or sculpture-like buildings which are very different when compared to regular buildings. Construction industry stakeholders are facing stiff challenges in many aspects such as buildability, cost effectiveness, delivery time and facility management when dealing with irregular shaped building projects. Building Information Modelling (BIM is being utilized to enable architects, engineers and constructors to gain improved visualization for irregular shaped buildings; this has a purpose of identifying critical issues before initiating physical construction work. In this study, three variations of design options differing in rotating angle: 30 degrees, 60 degrees and 90 degrees are created to conduct quantifiable comparisons. Discussions are focused on three major aspects including structural planning, usable building space, and structural constructability. This research concludes that Building Information Modelling is instrumental in facilitating design optimization for irregular shaped building. In the process of comparing different design variations, instead of just giving “yes or no” type of response, stakeholders can now easily visualize, evaluate and decide to achieve the right balance based on their own criteria. Therefore, construction project stakeholders are empowered with superior evaluation and decision making capability.

  6. Solar energy in buildings solved by building information modeling

    Science.gov (United States)

    Chudikova, B.; Faltejsek, M.

    2018-03-01

    Building lead us to use renewable energy sources for all types of buildings. The use of solar energy is the alternatives that can be applied in a good ratio of space, price, and resultant benefits. Building Information Modelling is a modern and effective way of dealing with buildings with regard to all aspects of the life cycle. The basis is careful planning and simulation in the pre-investment phase, where it is possible to determine the effective result and influence the lifetime of the building and the cost of its operation. By simulating, analysing and insert a building model into its future environment where climate conditions and surrounding buildings play a role, it is possible to predict the usability of the solar energy and establish an ideal model. Solar systems also very affect the internal layout of buildings. Pre-investment phase analysis, with a view to future aspects, will ensure that the resulting building will be both low-energy and environmentally friendly.

  7. Energy Efficiency, Building Productivity and the Commercial Buildings Market

    Energy Technology Data Exchange (ETDEWEB)

    Jones, D.W.

    2002-05-16

    The energy-efficiency gap literature suggests that building buyers are often short-sighted in their failure to apply life-cycle costing principles to energy efficient building technologies, with the result that under investment in these advanced technology occurs. This study examines the reasons this behavior may occur, by analyzing the pressures that market forces place on purchasers of buildings. Our basic conclusion is that the fundamental manner in which the buildings sector does business creates pressures to reduce initial capital outlays and to hedge against a variety of risks, including the ability of building owners to capture benefits from energy efficiency. Starting from the position that building buyers' willingness to pay drives choices over building attributes, we examine basic market principles, the structure of the buildings market, including the role of lenders, and policies that promote penetration of energy efficient technologies. We conclude that greater attention to buyers, and to the incentives and constraints they face, would promote a better understanding of building investment choices and contribute to better policies to promote the penetration of these technologies into markets.

  8. Photovoltaic building blocks

    DEFF Research Database (Denmark)

    Hanberg, Peter Jesper; Jørgensen, Anders Michael

    2014-01-01

    efficiency of about 15% for commercial Silicon solar cells there is still much to gain. DTU Danchip provides research facilities, equipment and expertise for the building blocks that comprises fabricating the efficient solar cell. In order to get more of the sun light into the device we provide thin film......Photovoltaics (PV), better known as solar cells, are now a common day sight on many rooftops in Denmark.The installed capacity of PV systems worldwide is growing exponentially1 and is the third most importantrenewable energy source today. The cost of PV is decreasing fast with ~10%/year but to make...... it directcompetitive with fossil energy sources a further reduction is needed. By increasing the efficiency of the solar cells one gain an advantage through the whole chain of cost. So that per produced Watt of power less material is spent, installation costs are lower, less area is used etc. With an average...

  9. Renovating the Main Building

    CERN Multimedia

    CERN Bulletin

    2010-01-01

    CERN's "Main Building" is exactly that. The Organization's central hub, with hundreds of staff and visitors passing through its doors every day, will soon be getting a well-earned facelift. Refurbishment work will proceed in phases, starting with the Salle des Pas Perdus, the concourse between the Council Chamber and the Main Auditorium. By the end of August, informal seating areas will be installed, electronic display panels will provide practical information and improved sound insulation will enhance conditions in the auditoria and surrounding meeting rooms.   In light green the area that will undergo the facelift. Work will start in July. The ground floor is home to the entrance to Restaurant No. 1, the bank, the post office, the travel agent, the Users Office, the Staff Association, the notice boards etc. Step up to the first floor to access CERN's largest lecture theatre, the Council Chamber and its "Pas Perdus" lobby. Everyone who works at or visits CERN i...

  10. Building perservation practice

    DEFF Research Database (Denmark)

    Pilegaard, Marie Kirstine

    Cultural Heritage sites are in the current practice, defined as everything you find on a site within a delimited selected area. Written sources and guidelines for the preservation of the cultural heritage, written by the public authorities or professionals describe them as places that tell a story......, and they indicate the importance of this story to be preserved. The professionals, who cooperate on the preservation efforts for the cultural environments today, all emphasizes the communication of the story, but using different approaches towards the processes of reading, interpreting and communicating. The role...... of architects and planners is primarily to reconcile the conservation prospects with the future use of buildings and sites. They intermediary the site through selections of the narratives, and in practice the restoration or transformation projects becomes a communication of the selected story, utilized...

  11. Building theory through design

    DEFF Research Database (Denmark)

    Markussen, Thomas

    2017-01-01

    This chapter deals with a fundamental matter of concern in research through design: how can design work lead to the building of new theory? Controversy exists about the balance between theory and design work in research through design. While some researchers see theory production as the scientific...... hallmark of this type of research, others argue for design work being the primary achievement, with theory serving the auxiliary function of inspiring new designs. This paper demonstrates how design work and theory can be appreciated as two equally important outcomes of research through design. To set...... the scene, it starts out by briefly examining ideas on this issue presented in existing research literature. Hereafter, it introduces three basic forms in which design work can lead to theory that is referred to as extending theories, scaffolding theories and blending theories. Finally, it is discussed how...

  12. Open string model building

    International Nuclear Information System (INIS)

    Ishibashi, Nobuyuki; Onogi, Tetsuya

    1989-01-01

    Consistency conditions of open string theories, which can be a powerful tool in open string model building, are proposed. By making use of these conditions and assuming a simple prescription for the Chan-Paton factors, open string theories in several backgrounds are studied. We show that 1. there exist a large number of consistent bosonic open string theories on Z 2 orbifolds, 2. SO(32) type I superstring is the unique consistent model among fermionic string theories on the ten-dimensional flat Minkowski space, and 3. with our prescription for the Chan-Paton factors, there exist no consistent open superstring theories on (six-dimensional Minkowski space-time) x (Z 2 orbifold). (orig.)

  13. Combining in Theory Building

    Directory of Open Access Journals (Sweden)

    Uolevi Lehtinen

    2013-07-01

    Full Text Available The objectives of this article strive to describe the idea and rationale of combining i.e. why, when and how to develop theoretically new combined approaches. Then business administration, especially marketing is used as a theoretical and empirical illustrative area. Methodology is inductive and deductive logic and in the empirical examples surveys, case analysis and utilization of secondary data. This article introduce a new promising way, in the long run, to develop new comprehensive approaches and even paradigms for different disciplines, subdisciplines and branches of subdiciplines. Therefore, the ultimate message of the article is to challenge the researchers to put the idea and rationale for combing to the test in their own research field and to build new combined and comprehensive approaches if possible in the field. This message is rather multidisciplinary concerning for example economics, social sciences and political sciences in addition to business administration.

  14. Building Land Information Policies

    DEFF Research Database (Denmark)

    Enemark, Stig

    2004-01-01

    The paper presents a conceptual understanding in the areas of Cadastre, Land Administration, and Land Management as a basis for building adequate land information policies. To develop this understanding the paper looks at each area as a system or an infrastructure designed for handling specific...... of measurement science, spatial information, management, and land management. (2) To establish national professional associations which accommodate a modern interdisciplinary profile. (3) To assess the capacity needs in land administration and to develop the capacity needed at societal, institutional...... and personal level.    (4) To establish appropriate institutional and organisational infrastructures to manage the integration of topographic mapping and cadastral information into a coherent land administration system for sustainable development. The paper aims to establish the basic understanding for dealing...

  15. Informed consent -- Building consensus

    International Nuclear Information System (INIS)

    Lovenheim, R.

    1990-01-01

    The author shares his observations and offers an approach to 'building consensus' for what he believes is the only environmentally sound option, i.e., safe, permanent disposal of low-level radioactive waste (LLRW). Consensus does not mean unanimity, acceptance, or harmony. The low-level radioactive waste disposal issue is fraught with fear and hysteria. The paper discusses major emotions that fracture public opinion regarding this issue. The author defines consensus as the informed consent of LLRW disposal strategies by a majority of citizens whose cooperation is required to achieve the goals of environmentally sound solution. The political aspects are reviewed. The need for US Department of Energy to fulfill its importance technical assistance role is discussed

  16. Can We Build Inclusion?

    Science.gov (United States)

    Kirkeby, Inge Mette; Grangaard, Sidse

    2016-01-01

    Inclusion of children with special needs in kindergartens and preschools may be approached from different angles. This paper raises the question of whether the physical framework of kindergartens makes any difference for daily life at the kindergarten at all, and whether it can support inclusion of some children with special needs. Hence the title - can we build inclusion? In the literature of Universal Design, accommodation and design features seldom reflect the less visible disabilities. The paper is based on a research project initiated to investigate how more or less space influences daily pedagogical practice in general. Twelve interviews were conducted with experienced teachers from twelve different kindergartens with different amounts of space, varying from a ratio of 2.1 m2 play area per child to 5.5 m2. The results indicated that, for a group of children with special needs in particular, the amount of space is crucial. This group consisted of children who were socially very extrovert, and who maybe were noisy, easily provoked, and quick to get involved in arguments with other children. Alternatively, children in the group were very restrained and withdrawn in social interaction. Based on the answers in the interviews, we found support for answering the question in the title in the affirmative; we can build inclusion! This is because the teachers' experience indicated that, if there was sufficient space per child, there were fewer conflicts and the children managed to stay in the same activity for a much longer period. Sufficient space made it possible to divide the children into smaller groups, and use any secluded space. Therefore, it was much easier for other children to include some children with special needs. Accordingly, we can say that, sufficient space per child and an adequate layout and furnishing of the kindergarten is an advantage for all children. This is a clear example of Universal Design in which architectural solutions that are good for

  17. Guidelines for Building Science Education

    Energy Technology Data Exchange (ETDEWEB)

    Metzger, Cheryn E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Rashkin, Samuel [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Huelman, Pat [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-11-01

    The U.S. Department of Energy’s (DOE) residential research and demonstration program, Building America, has triumphed through 20 years of innovation. Partnering with researchers, builders, remodelers, and manufacturers to develop innovative processes like advanced framing and ventilation standards, Building America has proven an energy efficient design can be more cost effective, healthy, and durable than a standard house. As Building America partners continue to achieve their stretch goals, they have found that the barrier to true market transformation for high performance homes is the limited knowledge-base of the professionals working in the building industry. With dozens of professionals taking part in the design and execution of building and selling homes, each person should have basic building science knowledge relevant to their role, and an understanding of how various home components interface with each other. Instead, our industry typically experiences a fragmented approach to home building and design. After obtaining important input from stakeholders at the Building Science Education Kick-Off Meeting, DOE created a building science education strategy addressing education issues preventing the widespread adoption of high performance homes. This strategy targets the next generation and provides valuable guidance for the current workforce. The initiative includes: • Race to Zero Student Design Competition: Engages universities and provides students who will be the next generation of architects, engineers, construction managers and entrepreneurs with the necessary skills and experience they need to begin careers in clean energy and generate creative solutions to real world problems. • Building Science to Sales Translator: Simplifies building science into compelling sales language and tools to sell high performance homes to their customers. • Building Science Education Guidance: Brings together industry and academia to solve problems related to

  18. Integrating Environmentally Responsive Elements in Buildings

    DEFF Research Database (Denmark)

    Heiselberg, Per

    2006-01-01

    Significant improvement have been achieved on efficiency improvements of specific building elements like the building envelope and building equipment and services and whilst most building elements still offer opportunities for efficiency improvements, the greatest future potential lie with techno......Significant improvement have been achieved on efficiency improvements of specific building elements like the building envelope and building equipment and services and whilst most building elements still offer opportunities for efficiency improvements, the greatest future potential lie...

  19. Tropical Zero Energy Office Building

    DEFF Research Database (Denmark)

    Reimann, Gregers Peter; Kristensen, Poul Erik

    2006-01-01

    The new headquarter for Pusat Tenaga Malaysia is designed to be a Zero Emission Office Building (ZEO). A full range of passive and active energy efficiency measures are implemented such that the building will need no more electricity than what can be produced via its own Building Integrated PV...... lighting. These measures include the use of high efficient lighting controlled according to demand, high efficiency pumps and fans, a high efficiency chiller, and use of energy efficient office equipment. The buildings PV system is connected to the grid. Solar electricity is exported to the grid during...... of 24 – 26 oC can be maintained throughout the office hours. The PV roof of the building serves multiple purposes. During daytime, the roof becomes the powerplant of the building, and during nighttime, the PV roof becomes the “cooling tower” for the chiller. The roof will be covered by a thin water film...

  20. Building Energy Monitoring and Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Tianzhen; Feng, Wei; Lu, Alison; Xia, Jianjun; Yang, Le; Shen, Qi; Im, Piljae; Bhandari, Mahabir

    2013-06-01

    This project aimed to develop a standard methodology for building energy data definition, collection, presentation, and analysis; apply the developed methods to a standardized energy monitoring platform, including hardware and software, to collect and analyze building energy use data; and compile offline statistical data and online real-time data in both countries for fully understanding the current status of building energy use. This helps decode the driving forces behind the discrepancy of building energy use between the two countries; identify gaps and deficiencies of current building energy monitoring, data collection, and analysis; and create knowledge and tools to collect and analyze good building energy data to provide valuable and actionable information for key stakeholders.

  1. Buildings Lean Maintenance Implementation Model

    Science.gov (United States)

    Abreu, Antonio; Calado, João; Requeijo, José

    2016-11-01

    Nowadays, companies in global markets have to achieve high levels of performance and competitiveness to stay "alive".Within this assumption, the building maintenance cannot be done in a casual and improvised way due to the costs related. Starting with some discussion about lean management and building maintenance, this paper introduces a model to support the Lean Building Maintenance (LBM) approach. Finally based on a real case study from a Portuguese company, the benefits, challenges and difficulties are presented and discussed.

  2. Building Evacuation with Mobile Devices

    OpenAIRE

    Merkel, Sabrina

    2014-01-01

    The rapidly growing world population and increasingly dense settlements demand ever-larger and more complex buildings from today's engineers. In comparison to this technological progress, a building's equipment for emergency evacuation has been hardly developed further. This work presents a concept for a building evacuation system based on mobile devices. Furthermore, various algorithms for route planning with mobile devices and for indoor localization of mobile devices are addressed.

  3. Radon risk in residential buildings

    International Nuclear Information System (INIS)

    Niewiadomski, T.

    1996-01-01

    The author discusses the risk related to the inhalation of radon decay products. This products are the cause of almost the half of the doses absorbed by the people. The concentration of radon in buildings is much higher than in the open areas and its country average in Poland is 50 Bq/m 3 . It is difficult to predict the concentration of radon in the building without measurement. Author concludes that there are technical means to decrease radon concentration in buildings

  4. User Driven Innovative Building Design

    DEFF Research Database (Denmark)

    Christiansson, Per; Sørensen, Kristian Birch; Steffensen, K. G.

    2009-01-01

    During recent years there has been an ever-increasing focus on the possibilities to change the building process to raise quality on the final building products as well as on the activities of actors involved in the building process. One reason for this interest is the new opportunities evolving due...... Space. In addition to these spaces there are supporting artifacts like Idea Bank and Good Story/Best Practice bank as well as Ontology containers and access to Communities of Practice and Interest. The project has so far validated the need for enhanced methods to involve end-users of buildings...

  5. Descent in buildings (AM-190)

    CERN Document Server

    Mühlherr, Bernhard; Weiss, Richard M

    2015-01-01

    Descent in Buildings begins with the resolution of a major open question about the local structure of Bruhat-Tits buildings. The authors then put their algebraic solution into a geometric context by developing a general fixed point theory for groups acting on buildings of arbitrary type, giving necessary and sufficient conditions for the residues fixed by a group to form a kind of subbuilding or "form" of the original building. At the center of this theory is the notion of a Tits index, a combinatorial version of the notion of an index in the relative theory of algebraic groups. These results

  6. Building Energy Monitoring and Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Tianzhen; Feng, Wei; Lu, Alison; Xia, Jianjun; Yang, Le; Shen, Qi; Im, Piljae; Bhandari, Mahabir

    2013-06-01

    U.S. and China are the world’s top two economics. Together they consumed one-third of the world’s primary energy. It is an unprecedented opportunity and challenge for governments, researchers and industries in both countries to join together to address energy issues and global climate change. Such joint collaboration has huge potential in creating new jobs in energy technologies and services. Buildings in the US and China consumed about 40% and 25% of the primary energy in both countries in 2010 respectively. Worldwide, the building sector is the largest contributor to the greenhouse gas emission. Better understanding and improving the energy performance of buildings is a critical step towards sustainable development and mitigation of global climate change. This project aimed to develop a standard methodology for building energy data definition, collection, presentation, and analysis; apply the developed methods to a standardized energy monitoring platform, including hardware and software, to collect and analyze building energy use data; and compile offline statistical data and online real-time data in both countries for fully understanding the current status of building energy use. This helps decode the driving forces behind the discrepancy of building energy use between the two countries; identify gaps and deficiencies of current building energy monitoring, data collection, and analysis; and create knowledge and tools to collect and analyze good building energy data to provide valuable and actionable information for key stakeholders.

  7. Energy Flexibility in Retail Buildings

    DEFF Research Database (Denmark)

    Ma, Zheng; Billanes, Joy Dalmacio; Kjærgaard, Mikkel Baun

    2017-01-01

    Retail buildings has an important role for demand side energy flexibility because of their high energy consumption, variety of energy flexibility resources, and centralized control via building control systems. Energy flexibility requires agreements and collaborations among different actors......), with the discussion of the stakeholders’ roles and their interrelation in delivering energy flexibility with the influential factors to the actual implementation of energy flexible operation of their buildings. Based on a literature analysis, the results cover stakeholders’ types and roles, perceptions (drivers......, barriers, and benefits), energy management activities and technology adoptions, and the stakeholders’ interaction for the energy flexibility in retail buildings....

  8. Metrics for building performance assurance

    Energy Technology Data Exchange (ETDEWEB)

    Koles, G.; Hitchcock, R.; Sherman, M.

    1996-07-01

    This report documents part of the work performed in phase I of a Laboratory Directors Research and Development (LDRD) funded project entitled Building Performance Assurances (BPA). The focus of the BPA effort is to transform the way buildings are built and operated in order to improve building performance by facilitating or providing tools, infrastructure, and information. The efforts described herein focus on the development of metrics with which to evaluate building performance and for which information and optimization tools need to be developed. The classes of building performance metrics reviewed are (1) Building Services (2) First Costs, (3) Operating Costs, (4) Maintenance Costs, and (5) Energy and Environmental Factors. The first category defines the direct benefits associated with buildings; the next three are different kinds of costs associated with providing those benefits; the last category includes concerns that are broader than direct costs and benefits to the building owner and building occupants. The level of detail of the various issues reflect the current state of knowledge in those scientific areas and the ability of the to determine that state of knowledge, rather than directly reflecting the importance of these issues; it intentionally does not specifically focus on energy issues. The report describes work in progress and is intended as a resource and can be used to indicate the areas needing more investigation. Other reports on BPA activities are also available.

  9. Electric Propulsion Research Building (EPRB)

    Data.gov (United States)

    Federal Laboratory Consortium — The Electric Propulsion Research Building (EPRB) capability centers on its suite of vacuum chambers, which are configured to meet the unique requirements related to...

  10. Lifetime environmental impact of buildings

    CERN Document Server

    Mequignon, Marc

    2014-01-01

    This work discusses the impact of the life of buildings on? sustainable development methods.?The study of the lifespan of the building is used to assess and?manage the environmental impacts associated?with all the stages of a product's life, from raw material extraction?through to repair, maintenance and?? 'end of life' scenarios. While several papers have discussed thegreenhouse gas emissions of buildings,?less research has been done on how these are affected by the lifespan?of the building. This book serves to?highlight the pertinence of this factor and contributes to providing?new ideas on

  11. Perencanaan Dengan Konsep Sustainable Building

    OpenAIRE

    Putra, Yulesta

    2004-01-01

    Di beberapa Negara maju pada tahun 2000 telah mengeluarkan peraturan tentang penerapan konsep sustainable building yang merupakan bagian dari program management lingkungan kota, oleh Yulesta Putra 04015309

  12. Diverse interpretations of confidence building

    International Nuclear Information System (INIS)

    Macintosh, J.

    1998-01-01

    This paper explores the variety of operational understandings associated with the term 'confidence building'. Collectively, these understandings constitute what should be thought of as a 'family' of confidence building approaches. This unacknowledged and generally unappreciated proliferation of operational understandings that function under the rubric of confidence building appears to be an impediment to effective policy. The paper's objective is to analyze these different understandings, stressing the important differences in their underlying assumptions. In the process, the paper underlines the need for the international community to clarify its collective thinking about what it means when it speaks of 'confidence building'. Without enhanced clarity, it will be unnecessarily difficult to employ the confidence building approach effectively due to the lack of consistent objectives and common operating assumptions. Although it is not the intention of this paper to promote a particular account of confidence building, dissecting existing operational understandings should help to identify whether there are fundamental elements that define what might be termed 'authentic' confidence building. Implicit here is the view that some operational understandings of confidence building may diverge too far from consensus models to count as meaningful members of the confidence building family. (author)

  13. Energy Innovations for Healthy Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Bogucz, Edward A. [Syracuse Univ., NY (United States)

    2016-09-23

    Healthy buildings provide high indoor environmental quality for occupants while simultaneously reducing energy consumption. This project advanced the development and marketability of envisioned healthy, energy-efficient buildings through studies that evaluated the use of emerging technologies in commercial and residential buildings. The project also provided resources required for homebuilders to participate in DOE’s Builders Challenge, concomitant with the goal to reduce energy consumption in homes by at least 30% as a first step toward achieving envisioned widespread availability of net-zero energy homes by 2030. In addition, the project included outreach and education concerning energy efficiency in buildings.

  14. Better Buildings NW Ohio

    Energy Technology Data Exchange (ETDEWEB)

    Moyer, Kevin [Toledo-Lucas County Port Authority, Toledo, OH (United States)

    2015-03-04

    When the Toledo Lucas County Port Authority (TLCPA) filed for the Department of Energy EECBG grant in late 2009, it was part of a strategic and Board backed objective to expand the organization’s economic development and financing programs into alternative energy and energy efficiency. This plan was filed with the knowledge and support of the areas key economic development agencies. The City of Toledo was also a key partner with the Mayor designating a committee to develop a Strategic Energy Policy for the City. This would later give rise to a Community Sustainability Strategic Plan for Toledo, Lucas County and the surrounding region with energy efficiency as a key pillar. When the TLCPA signed the grant documents with the DOE in June of 2010, the geographic area was severely distressed economically, in the early stages of a recovery from over a 30% drop in business activity and high unemployment. The TLCPA and its partners began identifying potential project areas well before the filing of the application, continuing to work diligently before the formal award and signing of the grant documents. Strong implementation and actions plans and business and financing models were developed and revised throughout the 3 year grant period with the long term goal of creating a sustainable program. The TLCPA and the City of Toledo demonstrated early leadership by forming the energy improvement district and evaluating buildings under their control including transportation infrastructure and logistics, government services buildings and buildings which housed several for profit and not for profit tenants while completing significant energy efficiency projects that created public awareness and confidence and solid examples of various technologies and energy savings. As was stated in the DOE Award Summary, the undertaking was focused as a commercial program delving into Alternative Energy Utility Districts; what are referred to in Ohio Statute as Energy Special Improvement

  15. Building guide : how to build Xyce from source code.

    Energy Technology Data Exchange (ETDEWEB)

    Keiter, Eric Richard; Russo, Thomas V.; Schiek, Richard Louis; Sholander, Peter E.; Thornquist, Heidi K.; Mei, Ting; Verley, Jason C.

    2013-08-01

    While Xyce uses the Autoconf and Automake system to configure builds, it is often necessary to perform more than the customary %E2%80%9C./configure%E2%80%9D builds many open source users have come to expect. This document describes the steps needed to get Xyce built on a number of common platforms.

  16. Bore pile foundation tall buildings closed in the heritage building

    Science.gov (United States)

    Triastuti, Nusa Setiani

    2017-11-01

    Bore pile foundation for high building surroundings heritage building should be not damage. Construction proses must good, no necking, no mixed deep water, no sliding soil, nonporous concrete. Objective the execution of bore pile so that heritage buildings and neighboring buildings that are old do not experience cracks, damage and tilting. The survey methodology was observe the process of the implementation of the dominant silt, clay soil, in addition a limited space and to analyze the results of loading tests, investigations of soil and daily reports. Construction process determines the success of the structure bore pile in high building structure bearing, without damaging a heritage building. Attainment the hard soil depth, density concrete, observable clean reinforcement in the implementation. Monitoring the implementation of, among others, the face of the ground water little reduce in the area and outside the footprint of the building, no impact of vibration drilling equipment, watching the mud content on the water coming out at the time of drilling, concrete volume was monitored each 2 m bore depth of pile, The result researched heritage building was not damage. The test results bore pile axial, lateral analyzed the results have the appropriate force design required.

  17. Capacity building for HIA

    Directory of Open Access Journals (Sweden)

    Gabriel Gulis PhD

    2007-09-01

    Full Text Available

    Background: To integrate health impact assessment (HIA into existing decision-making processes requires not only methods and procedures but also well-trained experts, aware policy makers and appropriate institutions. Capacity building is the assistance which is provided to entities, which have a need to develop a certain skill or competence, or for general upgrading of performance ability. If a new technique is planned to be introduced there is a need for capacity building with no respect to levels (local, regional, national, international or sectors (health, environment, finance, social care, education, etc.. As such, HIA is a new technique for most of the new Member States and accession countries of the European Union.

    Methods: To equip individuals with the understanding and skills needed to launch a HIA or be aware of the availability of this methodology and to access information, knowledge and training, we focused on the organization of workshops in participating countries. The workshops served also as pilot events to test a “curriculum” for HIA; a set of basic topics and presentations had been developed to be tested during workshops. In spite of classical in-class workshops we aimed to organize e-learning events as a way to over come the “busyness” problem of decision makers.

    Results: Throughout March – October 2006 we organized and ran 7 workshops in Denmark, Turkey, Lithuania, Poland, Bulgaria, Slovak Republic and Hungary. Participants came from the public health sector (141, non-public health decision makers (113 and public health students (100. A concise curriculum was developed and tested during these workshops. Participants developed a basic understanding of HIA, skills to develop and use their own screening tools as well as scoping.Within the workshop in Denmark we tested an online, real-time Internet based training method; participants highly welcomed this

  18. Virtual building environments (VBE) - Applying information modeling to buildings

    Energy Technology Data Exchange (ETDEWEB)

    Bazjanac, Vladimir

    2004-06-21

    A Virtual Building Environment (VBE) is a ''place'' where building industry project staffs can get help in creating Building Information Models (BIM) and in the use of virtual buildings. It consists of a group of industry software that is operated by industry experts who are also experts in the use of that software. The purpose of a VBE is to facilitate expert use of appropriate software applications in conjunction with each other to efficiently support multidisciplinary work. This paper defines BIM and virtual buildings, and describes VBE objectives, set-up and characteristics of operation. It informs about the VBE Initiative and the benefits from a couple of early VBE projects.

  19. INL High Performance Building Strategy

    Energy Technology Data Exchange (ETDEWEB)

    Jennifer D. Morton

    2010-02-01

    High performance buildings, also known as sustainable buildings and green buildings, are resource efficient structures that minimize the impact on the environment by using less energy and water, reduce solid waste and pollutants, and limit the depletion of natural resources while also providing a thermally and visually comfortable working environment that increases productivity for building occupants. As Idaho National Laboratory (INL) becomes the nation’s premier nuclear energy research laboratory, the physical infrastructure will be established to help accomplish this mission. This infrastructure, particularly the buildings, should incorporate high performance sustainable design features in order to be environmentally responsible and reflect an image of progressiveness and innovation to the public and prospective employees. Additionally, INL is a large consumer of energy that contributes to both carbon emissions and resource inefficiency. In the current climate of rising energy prices and political pressure for carbon reduction, this guide will help new construction project teams to design facilities that are sustainable and reduce energy costs, thereby reducing carbon emissions. With these concerns in mind, the recommendations described in the INL High Performance Building Strategy (previously called the INL Green Building Strategy) are intended to form the INL foundation for high performance building standards. This revised strategy incorporates the latest federal and DOE orders (Executive Order [EO] 13514, “Federal Leadership in Environmental, Energy, and Economic Performance” [2009], EO 13423, “Strengthening Federal Environmental, Energy, and Transportation Management” [2007], and DOE Order 430.2B, “Departmental Energy, Renewable Energy, and Transportation Management” [2008]), the latest guidelines, trends, and observations in high performance building construction, and the latest changes to the Leadership in Energy and Environmental Design

  20. Adaptive building skin structures

    International Nuclear Information System (INIS)

    Del Grosso, A E; Basso, P

    2010-01-01

    The concept of adaptive and morphing structures has gained considerable attention in the recent years in many fields of engineering. In civil engineering very few practical applications are reported to date however. Non-conventional structural concepts like deployable, inflatable and morphing structures may indeed provide innovative solutions to some of the problems that the construction industry is being called to face. To give some examples, searches for low-energy consumption or even energy-harvesting green buildings are amongst such problems. This paper first presents a review of the above problems and technologies, which shows how the solution to these problems requires a multidisciplinary approach, involving the integration of architectural and engineering disciplines. The discussion continues with the presentation of a possible application of two adaptive and dynamically morphing structures which are proposed for the realization of an acoustic envelope. The core of the two applications is the use of a novel optimization process which leads the search for optimal solutions by means of an evolutionary technique while the compatibility of the resulting configurations of the adaptive envelope is ensured by the virtual force density method

  1. Energy Performance of Buildings

    DEFF Research Database (Denmark)

    Heiselberg, Per

    2007-01-01

    "Sustainable development" has been defined best by the Brundtland Commission as "development that meets the needs of the present without compromising the ability of future generations to meet their own needs". Adequate and affordable energy supplies have been key to economic development and are c......"Sustainable development" has been defined best by the Brundtland Commission as "development that meets the needs of the present without compromising the ability of future generations to meet their own needs". Adequate and affordable energy supplies have been key to economic development...... and are central to improving social and economic well- being, and human welfare and raising living standards. Even if energy is essential for development, it is only a means to an end. The end is good health, high living standards, a sustainable economy and a clean environment. The European Climate change...... programme (ECCP) was established in June 2000 to help identify the most environmentally cost-effective measures enabling the EU to meet its target under the Kyoto Protocol, namely an 8% reduction in greenhouse gas emissions from 1990 levels by 2012. Energy use in buildings accounts for almost half of all CO...

  2. Building a crystal palace

    CERN Multimedia

    2007-01-01

    The end-caps of the CMS electromagnetic calorimeter (ECAL) take shape as the first quadrant was completed on Wednesday 3 October. 1831 crystals, organised into five by five blocks named ‘supercrystals’, make up the first quadrant of Dee 1.With the 61,200-crystal barrel of its electromagnetic calorimeter (ECAL) complete, CMS is now building the endcaps, on the tenth anniversary of their initial design. Crystals for the endcaps were the last to be made, so the race is now on to have them all in place and ready for the turn-on of the LHC next year. Assembly of the first of eight quadrants began in June and crystal mounting was completed on Wednesday 3 October. Each crystal is transparent, has a volume just larger than a CERN coffee cup yet weighs a huge 1.5kg. 1831 of these lead tungstate crystals went into the first quadrant from a total 14,648 in the endcaps. The lead and tungsten account for 86% of each crystal’s weight, but as project leader Dave Cockerill expl...

  3. Building an innovation factory.

    Science.gov (United States)

    Hargadon, A; Sutton, R I

    2000-01-01

    New ideas are the precious currency of the new economy, but generating them doesn't have to be a mysterious process. The image of the lone genius inventing from scratch is a romantic fiction. Businesses that constantly innovate have systematized the production and testing of new ideas, and the system can be replicated by practically any organization. The best innovators use old ideas as the raw materials for new ideas, a strategy the authors call knowledge brokering. The system for sustaining innovation is the knowledge brokering cycle, and the authors discuss its four parts. The first is capturing good ideas from a wide variety of sources. The second is keeping those ideas alive by playing with them, discussing them, and using them. Imagining new uses for old ideas is the third part--some knowledge brokers encourage cross-pollination by creating physical layouts that allow, or even force, people to interact with one another. The fourth is turning promising concepts into real services, products, processes, or business models. Companies can use all or part of the cycle. Large companies in particular desperately need to move ideas from one place to another. Some will want to build full-fledged consulting groups dedicated to internal knowledge brokering. Others can hire people who have faced problems similar to the companies' current problems. The most important lesson is that business leaders must change how they think about innovation, and they must change how their company cultures reflect that thinking.

  4. 309 Building transition plan

    International Nuclear Information System (INIS)

    Graves, C.E.

    1994-01-01

    The preparation for decontamination and decommissioning (transition) of the 309 Building is projected to be completed by the end of the fiscal year (FY) 1998. The major stabilization and decontamination efforts include the Plutonium Recycle Test Reactor (PRTR), fuel storage and transfer pits, Transfer Waste (TW) tanks and the Ion Exchange Vaults. In addition to stabilizing contaminated areas, equipment, components, records, waste products, etc., will be dispositioned. All nonessential systems, i.e., heating, ventilation, and air conditioning (HVAC), electrical, monitoring, fluids, etc., will be shut down and drained/de-energized. This will allow securing of the process, laboratory, and office areas of the facility. After that, the facility will be operated at a level commensurate with its surveillance needs while awaiting D ampersand D. The implementation costs for FY 1995 through FY 1998 for the transition activities are estimated to be $1,070K, $2,115K, $2,939K, and $4,762K, respectively. Costs include an assumed company overhead of 20% and a 30% out year contingency

  5. Drying of building lumber

    Energy Technology Data Exchange (ETDEWEB)

    Washimi, Hiroshi

    1988-08-20

    Dried lumber is classified into air dried and kiln-dried lumber. The water content of kiln-dried lumber is specified by the Japan Agricultural Standards. However, since building lumber varies in such factors as the location where it was growing, species and shape, the standards, though relaxed, are not being observed. In fact, lumbered products which are not ''Kiln-dried'' frequently bear ''kiln-dried lumber'' marks. In an attempt to correct the situation, the Forestry Agency has set up voluntary standards, but problems still remain. The conventional drying method consists of first subjecting the lumber to optimum drying, then letting bending and deformations to freely and fully appear, and follow this with corrective sawing to produce planks straight from end to end. Compared with air dried lumber in terms of moisture content, kiln-dried lumber remains much with same with minimal shrinkage and expansion. For oil-containing resin, such normal treatments as drying by heating, steaming and boiling seem to be quite effective. Kiln drying, which is becoming more and more important with changes in the circulation system, consists of the steaming-drying-heating method and the dehumidizing type drying method. The major factor which determines the drying cost is the number of days required for drying, which depends largely on the kind of lumber and moisture content. The Forestry Angency is promoting production of defoiled lumber. (2 figs, 2 tables)

  6. Building brighter PV business

    International Nuclear Information System (INIS)

    Hacker, R.

    2002-01-01

    The current status and future prospects of the UK market for solar photovoltaic (PV) electricity are briefly discussed. Through the Department of Trade and Industry (DTI), the UK Government has supported research and development (R and D) into PV for a number of years. This programme has now been extended to demonstrating PV systems on houses. Phase 2 - the domestic field trial programme - aims to monitor the performance of individual systems and the impact on a cluster of systems on the electricity network. New funding had allowed a trebling of the size of this programme, which involves both private developers and housing associations. The DTI is also working to promote PV on commercial buildings, eg the installation of BP Solar PV systems at BP petrol stations. The PV industry in the UK is technically strong and is working to overcome the barriers in the UK to greater uptake of the technology (including cost, conservatism, legal requirements and metering practices). Improvements are expected in a number of recent initiatives in the electricity industry to boost PV use and the PV industry is lobbying for PV to be included in the Enhanced Capital Allowances (ECA) scheme

  7. Strengthening Building Retrofit Markets

    Energy Technology Data Exchange (ETDEWEB)

    Templeton, Mary [Michigan Saves; Jackson, Robert [Michigan Energy Office

    2014-04-15

    The Business Energy Financing (BEF) program offered commercial businesses in Michigan affordable financing options and other incentives designed to support energy efficiency improvements. We worked through partnerships with Michigan utilities, lenders, building contractors, trade associations, and other community organizations to offer competitive interest rates and flexible financing terms to support energy efficiency projects that otherwise would not have happened. The BEF program targeted the retail food market, including restaurants, grocery stores, convenience stores, and wholesale food vendors, with the goal of achieving energy efficiency retrofits for 2 percent of the target market. We offered low interest rates, flexible payments, easy applications and approval processes, and access to other incentives and rebates. Through these efforts, we sought to help customers strive for energy savings retrofits that would save 20 percent or more on their energy use. This program helped Michigan businesses reduce costs by financing energy efficient lighting, heating and cooling systems, insulation, refrigeration, equipment upgrades, and more. Businesses completed the upgrades with the help of our authorized contractors, and, through our lending partners, we provided affordable financing options.

  8. The sick-building syndrome; Das Sick-Building-Syndrom

    Energy Technology Data Exchange (ETDEWEB)

    Henne, A.; Neumann, H.F.; Winneke, G.

    1992-12-31

    The sick-building syndrome is characterized by the presence of general, non-specific symptoms (e.g., headache, tiredness, respiratory problems, eye trouble, vertigo, nausea, unspecific hypersensitivity) in association with a particular indoor ambience. It is clearly distinguishable from `building-related illness`, referring to a well-defined clinical syndrome due to staying in a building and for which a cause can, in general, be established. Disorders in the case of the sick-building syndrome are manifold and confirmed objectifiable results are hardly available so far. Yet there are some organ-related methods for the confirmation of findings concerning, for instance, the eyes, the skin and the area of the nose. The causes of the incidence of sick-building syndrome are more or less unclear. It is a multifactorial phenomenon involving physical, biological, chemical, individual-specific and psychological factors. Buildings where sick-building syndrome occurs typically exhibit certain properties. The European Community has already made proposals for the investigation of incriminated buildings. A systematic survey by questionnaire together with individual interviews plays an import part towards clarifying the syndrome. (orig./UWA) [Deutsch] Das Sick-Building-Syndrom beschreibt das Vorhandensein von allgemeinen, nicht spezifischen Symptomen (z.B. Kopfschmerzen, Muedigkeit, Atembeschwerden, Augenreizungen, Schwindelgefuehl, Uebelkeit, unspezifische Ueberempfindlichkeit), assoziiert mit einer besonderen Innenraumumgebung. Deutlich hiervon abzugrenzen ist die ``Building related illness``, bei der ein klinisch definiertes Krankheitsbild vorliegt, das durch den Aufenthalt im Gebaeude verursacht wird und fuer das im allgemeinen eine Ursache ermittelt werden kann. Das Beschwerdebild beim Sick-Building-Syndrom ist vielfaeltig, und gesicherte, objektivierbare Befunde liegen hierzu bisher kaum vor. Dennoch gibt es einige organbezogenen Methoden zur Befundabsicherung, z.B. fuer das

  9. Building codes : obstacle or opportunity?

    Science.gov (United States)

    Alberto Goetzl; David B. McKeever

    1999-01-01

    Building codes are critically important in the use of wood products for construction. The codes contain regulations that are prescriptive or performance related for various kinds of buildings and construction types. A prescriptive standard might dictate that a particular type of material be used in a given application. A performance standard requires that a particular...

  10. What is a green building?

    NARCIS (Netherlands)

    Vreenegoor, R.C.P.; Krikke, T.; Mierlo, van B.P.; Pluijm, van der W.M.P.; Poortvliet, R.; Hensen, J.L.M.; Loomans, M.G.L.C.

    2009-01-01

    What is a green building? A large amount of definitions and green rating tools prove that an exact definition is still a point of discussion. To research the differences between green rating tools, four different buildings are assessed with: EPN, BREEAM, LEED, GreenCalc+ and EcoQuantum. These tools

  11. Building on piles in floodplains

    NARCIS (Netherlands)

    Harke, J.; van der Maarel, A.J.G.; Schielen, Ralph Mathias Johannes; Ribberink, Jan S.; Augustijn, Dionysius C.M.; van Os, A.G.

    2007-01-01

    Last year in the Netherlands 15 locations were allocated along the Rhine branches where – under strong restrictions - it was allowed to build in floodplains. Building in floodplains may lead to a water level rise during floods and moreover, the river bed morphology may be disturbed

  12. Summary of Green Building Programs

    Energy Technology Data Exchange (ETDEWEB)

    2002-08-01

    In early 2002, the National Association of Home Builders completed a census of residential green building programs across the United States to assess differences and similarities among programs. This report catalogs different ways that builders participate in residential green building programs.

  13. Energy simulation in building design

    NARCIS (Netherlands)

    Hensen, J.L.M.

    1992-01-01

    Design decision support related to building energy consumption and / or indoor climate, should be based on an integral approach of environment, building, heating, ventilating and airconditioning (HVAC) system and occupants. The tools to achieve this are now available in the form of computer

  14. Building Huys Hengelo in VRML

    NARCIS (Netherlands)

    Bearman, D.; Reidsma, Dennis; Kragtwijk, M.; Garzotto, F.; Nijholt, Antinus

    2001-01-01

    In this paper we report about our attempts to rebuild a historical building, ‘Huys Hengelo’, its interior, a farm built next to it and other parts of its environment (including a draw-bridge and a gate) using the Virtual Reality Modeling Language (VRML). This castle building played an important role

  15. Building Blocks for Personal Brands

    Science.gov (United States)

    Thomas, Lisa Carlucci

    2011-01-01

    In this article, the author discusses the four essential building blocks for personal brands: (1) name; (2) message; (3) channels; and (4) bridges. However, outstanding building materials can only take a person so far. The author emphasizes that vision, determination, faith, a sense of humor, and humility are also required.

  16. The Areopagus Oval Building Reconsidered

    NARCIS (Netherlands)

    van den Eijnde, F.; Laughy, Michael H.

    2017-01-01

    The Areopagus Oval Building (AOB) provides a rare insight into Athenian architecture during the Geometric period, a time in which the archaeological record is mostly confined to graves. Dorothy Burr’s original 1933 publication of the building remains an exemplary and exhaustive presentation of the

  17. School Building Organisation in Greece.

    Science.gov (United States)

    PEB Exchange, 2001

    2001-01-01

    Discusses the past and current organizational structure of Greece's School Building Organisation, a body established to work with government agencies in the design and construction of new buildings and the provisioning of educational equipment. Future planning to incorporate culture and creativity, sports, and laboratory learning in modern school…

  18. Maintenance Planning for Historic Buildings

    Directory of Open Access Journals (Sweden)

    Diana Plian

    2008-01-01

    Full Text Available The key to good maintenance of historic buildings is a long-range maintenance plan. Long-range planning recognizes a responsibility to the future to prolong the useful life of a building by preserving it in its present condition and preventing or slowing deterioration and damage from natural or other causes.

  19. Building Bounce-Back Kids

    Science.gov (United States)

    Lloyd-Zannini, Lou

    2011-01-01

    In this article, the author talks about building resilience--that ability to push through hardship to success, to rebound from failure, and to "keep on keepin' on" when things seem impossible. The author assert that lots of gifted and talented kids need help building their resilience. In today's world, when striving for mediocrity can seem like…

  20. Energy conservation in rented buildings

    Energy Technology Data Exchange (ETDEWEB)

    Klingberg, T.; Broechner, J.; Forsman, J.; Gaunt, L.; Holgersson, M.

    1984-08-01

    The bulletin is an anthology of nine essays by different authors addressing the issue of energy conservation in buildings, where there exists a landlord/tenant relationship. After an overview of the rental market and the stock of rental buildings different types of rental contracts and energy charges are described.

  1. Federal Buildings Supplemental Survey 1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-11-01

    The Energy Information Administration (EIA) of the US Department of Energy (DOE) is mandated by Congress to be the agency that collects, analyzes, and disseminates impartial, comprehensive data about energy including the volume consumed, its customers, and the purposes for which it is used. The Federal Buildings Supplemental Survey (FBSS) was conducted by EIA in conjunction with DOE`s Office of Federal Energy Management Programs (OFEMP) to gain a better understanding of how Federal buildings use energy. This report presents the data from 881 completed telephone interviews with Federal buildings in three Federal regions. These buildings were systematically selected using OFEMP`s specifications; therefore, these data do not statistically represent all Federal buildings in the country. The purpose of the FBSS was threefold: (1) to understand the characteristics of Federal buildings and their energy use; (2) to provide a baseline in these three Federal regions to measure future energy use in Federal buildings as required in EPACT; and (3) to compare building characteristics and energy use with the data collected in the CBECS.

  2. Mould growth on building materials

    DEFF Research Database (Denmark)

    Fog Nielsen, K.

    Mould growth in buildings is associated with adverse health effects among the occupants of the building. However actual growth only occurs in damp and water-damaged materials, and is an increasing problem in Denmark, due to less robust constructions, inadequate maintenance, and too little...

  3. California commercial building energy benchmarking

    Energy Technology Data Exchange (ETDEWEB)

    Kinney, Satkartar; Piette, Mary Ann

    2003-07-01

    Building energy benchmarking is the comparison of whole-building energy use relative to a set of similar buildings. It provides a useful starting point for individual energy audits and for targeting buildings for energy-saving measures in multiple-site audits. Benchmarking is of interest and practical use to a number of groups. Energy service companies and performance contractors communicate energy savings potential with ''typical'' and ''best-practice'' benchmarks while control companies and utilities can provide direct tracking of energy use and combine data from multiple buildings. Benchmarking is also useful in the design stage of a new building or retrofit to determine if a design is relatively efficient. Energy managers and building owners have an ongoing interest in comparing energy performance to others. Large corporations, schools, and government agencies with numerous facilities also use benchmarking methods to compare their buildings to each other. The primary goal of Task 2.1.1 Web-based Benchmarking was the development of a web-based benchmarking tool, dubbed Cal-Arch, for benchmarking energy use in California commercial buildings. While there were several other benchmarking tools available to California consumers prior to the development of Cal-Arch, there were none that were based solely on California data. Most available benchmarking information, including the Energy Star performance rating, were developed using DOE's Commercial Building Energy Consumption Survey (CBECS), which does not provide state-level data. Each database and tool has advantages as well as limitations, such as the number of buildings and the coverage by type, climate regions and end uses. There is considerable commercial interest in benchmarking because it provides an inexpensive method of screening buildings for tune-ups and retrofits. However, private companies who collect and manage consumption data are concerned that the

  4. Augmented reality building operations tool

    Science.gov (United States)

    Brackney, Larry J.

    2014-09-09

    A method (700) for providing an augmented reality operations tool to a mobile client (642) positioned in a building (604). The method (700) includes, with a server (660), receiving (720) from the client (642) an augmented reality request for building system equipment (612) managed by an energy management system (EMS) (620). The method (700) includes transmitting (740) a data request for the equipment (612) to the EMS (620) and receiving (750) building management data (634) for the equipment (612). The method (700) includes generating (760) an overlay (656) with an object created based on the building management data (634), which may be sensor data, diagnostic procedures, or the like. The overlay (656) is configured for concurrent display on a display screen (652) of the client (642) with a real-time image of the building equipment (612). The method (700) includes transmitting (770) the overlay (656) to the client (642).

  5. Capacity Building in Land Administration

    DEFF Research Database (Denmark)

    Enemark, Stig; Williamson, I

    2004-01-01

    Capacity building increasingly seen as a key component of land administration projects in developing and countries in transition undertaken by the international development banks and individual country development assistance agencies. However, the capacity building concept is often used within...... infrastructures for implementing land policies in a sustainable way. Where a project is established to create land administration infrastructures in developing or transition countries, it is critical that capacity building is a mainstream component, not as an add-on, which is often the case. In fact such projects...... should be dealt with as capacity building projects in themselves.    The article introduces a conceptual analytical framework that provides some guidance when dealing with capacity building for land administration in support of a broader land policy agenda....

  6. Data management for biofied building

    Science.gov (United States)

    Matsuura, Kohta; Mita, Akira

    2015-03-01

    Recently, Smart houses have been studied by many researchers to satisfy individual demands of residents. However, they are not feasible yet as they are very costly and require many sensors to be embedded into houses. Therefore, we suggest "Biofied Building". In Biofied Building, sensor agent robots conduct sensing, actuation, and control in their house. The robots monitor many parameters of human lives such as walking postures and emotion continuously. In this paper, a prototype network system and a data model for practical application for Biofied Building is pro-posed. In the system, functions of robots and servers are divided according to service flows in Biofield Buildings. The data model is designed to accumulate both the building data and the residents' data. Data sent from the robots and data analyzed in the servers are automatically registered into the database. Lastly, feasibility of this system is verified through lighting control simulation performed in an office space.

  7. Refurbishment and school buildings management in a smart building environment

    Science.gov (United States)

    Di Giuda, Giuseppe Martino; Villa, Valentina; Tagliabue, Lavinia Chiara; Giana, Paolo Ettore; Rinaldi, Stefano; Ciribini, Angelo Luigi Camillo

    2018-05-01

    Building Information Modelling is a methodology, which is able to take into account many data, both geometrical and non-geometrical, in order to evaluate at the actual condition of the asset. The project has the scope of evaluating the conditions of different school buildings, in order to develop a way to choose the best-tailored management solution to the owner. A further step is the management and planning of design solutions during the life cycle customized on monitored buildings' conditions. The research work focuses on providing a support decisions concerning the gap between the present building state laws and the current state of the existing buildings. The process will be developed in an expanded BIM environment, using sensors, which will give back the state of the consistency of the actual conditions to enable the buildings to adapt themselves in the best way into their specific constraints and boundaries. The results of the study are (i) a complete workflow to make decision and the possibility to shape the decision process on an objective through a scientific approach, (ii) evaluate the current state of the asset and (iii) manage maintenance in the lifespan. Further development will take in consideration all the aspects related to management of big data environment generated by a smart buildings system.

  8. Energy use in office buildings

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-10-01

    This is the report on Task IB, Familiarization with Additional Data Collection Plans of Annual Survey of BOMA Member and Non-Member Buildings in 20 Cities, of the Energy Use in Office Buildings project. The purpose of the work was to monitor and understand the efforts of the Building Owners and Managers Association International (BOMA) in gathering an energy-use-oriented data base. In order to obtain an improved data base encompassing a broad spectrum of office space and with information suitable for energy analysis in greater detail than is currently available, BOMA undertook a major data-collection effort. Based on a consideration of geographic area, climate, population, and availability of data, BOMA selected twenty cities for data collection. BOMA listed all of the major office space - buildings in excess of 40,000 square feet - in each of the cities. Tax-assessment records, local maps, Chamber of Commerce data, recent industrial-development programs, results of related studies, and local-realtor input were used in an effort to assemble a comprehensive office-building inventory. In order to verify the accuracy and completeness of the building lists, BOMA assembled an Ad-Hoc Review Committee in each city to review the assembled inventory of space. A questionnaire on office-building energy use and building characteristics was developed. In each city BOMA assembled a data collection team operating under the supervision of its regional affiliate to gather the data. For each city a random sample of buildings was selected, and data were gathered. Responses for over 1000 buildings were obtained.

  9. NASA, Building Tomorrow's Future

    Science.gov (United States)

    Mango, Edward

    2011-01-01

    We, as NASA, continue to Dare Mighty Things. Here we are in October. In my country, the United States of America, we celebrate the anniversary of Christopher Columbus's arrival in the Americas, which occurred on October 12, 1492. His story, although happening over 500 years ago, is still very valid today. It is a part of the American spirit; part of the international human spirit. Columbus is famous for discovering the new world we now call America, but he probably never envisioned what great discoveries would be revealed many generations later. But in order for Columbus to begin his great adventure, he needed a business plan. Ho would he go about obtaining the funds and support necessary to build, supply, and man the ships required for his travels? He had a lot of obstacles and distractions. He needed a strong, internal drive to achieve his plans and recruit a willing crew of explorers also ready to risk their all for the unknown journey ahead. As Columbus set sail, he said "By prevailing over all obstacles and distractions, one may unfailingly arrive at his chosen goal or destination." Columbus may not have known he was on a journey for all human exploration. Recently, Charlie Bolden, the NASA Administrator, said, "Human exploration is and has always been about making life better for humans on Earth." Today, NASA and the U.S. human spaceflight program hold many of the same attributes as did Columbus and his contemporaries - a willing, can-do spirit. We are on the threshold of exciting new times in space exploration. Like Columbus, we need a business plan to take us into the future. We need to design the best ships and utilize the best designers, with their past knowledge and experience, to build those ships. We need funding and support from governments to achieve these goals of space exploration into the unknown. NASA does have that business plan, and it is an ambitious plan for human spaceflight and exploration. Today, we have a magnificent spaceflight

  10. BUILDING MATERIALS RECLAMATION PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    David C. Weggel; Shen-En Chen; Helene Hilger; Fabien Besnard; Tara Cavalline; Brett Tempest; Adam Alvey; Madeleine Grimmer; Rebecca Turner

    2010-08-31

    This report describes work conducted on the Building Materials Reclamation Program for the period of September 2008 to August 2010. The goals of the project included selecting materials from the local construction and demolition (C&D) waste stream and developing economically viable reprocessing, reuse or recycling schemes to divert them from landfill storage. Educational resources as well as conceptual designs and engineering feasibility demonstrations were provided for various aspects of the work. The project was divided into two distinct phases: Research and Engineering Feasibility and Dissemination. In the Research Phase, a literature review was initiated and data collection commenced, an advisory panel was organized, and research was conducted to evaluate high volume C&D materials for nontraditional use; five materials were selected for more detailed investigations. In the Engineering Feasibility and Dissemination Phase, a conceptual study for a regional (Mecklenburg and surrounding counties) collection and sorting facility was performed, an engineering feasibility project to demonstrate the viability of recycling or reuse schemes was created, the literature review was extended and completed, and pedagogical materials were developed. Over the two-year duration of the project, all of the tasks and subtasks outlined in the original project proposal have been completed. The Final Progress Report, which briefly describes actual project accomplishments versus the tasks/subtasks of the original project proposal, is included in Appendix A of this report. This report describes the scientific/technical aspects (hypotheses, research/testing, and findings) of six subprojects that investigated five common C&D materials. Table 1 summarizes the six subprojects, including the C&D material studied and the graduate student and the faculty advisor on each subproject.

  11. Building Materials Reclamation Program

    International Nuclear Information System (INIS)

    Weggel, David C.; Chen, Shen-En; Hilger, Helene; Besnard, Fabien; Cavalline, Tara; Tempest, Brett; Alvey, Adam; Grimmer, Madeleine; Turner, Rebecca

    2011-01-01

    This report describes work conducted on the Building Materials Reclamation Program for the period of September 2008 to August 2010. The goals of the project included selecting materials from the local construction and demolition (C and D) waste stream and developing economically viable reprocessing, reuse or recycling schemes to divert them from landfill storage. Educational resources as well as conceptual designs and engineering feasibility demonstrations were provided for various aspects of the work. The project was divided into two distinct phases: Research and Engineering Feasibility and Dissemination. In the Research Phase, a literature review was initiated and data collection commenced, an advisory panel was organized, and research was conducted to evaluate high volume C and D materials for nontraditional use; five materials were selected for more detailed investigations. In the Engineering Feasibility and Dissemination Phase, a conceptual study for a regional (Mecklenburg and surrounding counties) collection and sorting facility was performed, an engineering feasibility project to demonstrate the viability of recycling or reuse schemes was created, the literature review was extended and completed, and pedagogical materials were developed. Over the two-year duration of the project, all of the tasks and subtasks outlined in the original project proposal have been completed. The Final Progress Report, which briefly describes actual project accomplishments versus the tasks/subtasks of the original project proposal, is included in Appendix A of this report. This report describes the scientific/technical aspects (hypotheses, research/testing, and findings) of six subprojects that investigated five common C and D materials. Table 1 summarizes the six subprojects, including the C and D material studied and the graduate student and the faculty advisor on each subproject.

  12. Intelligent and efficient use of renewable energy sources in Saxonia and Czech Republic. Technical, economic and legal aspects; Intelligenter und effizienter Einsatz von (er)neu(erbar)en Energien in Sachsen und Tschechien. Technische, wirtschaftliche und rechtliche Aspekte

    Energy Technology Data Exchange (ETDEWEB)

    Gramlich, Ludwig; Orantek, Kerstin (eds.)

    2011-07-01

    Within the meeting in Oberwiesenthal (Federal Republic of Germany) between 30th September and 02nd October, 2011, the following lectures were held: (a) Utilization of renewable energy sources in Czech Republic (Martin Neruda); (b) Scenarios of energy and ecology development in the next 20 years (Behumir Stedron); (c) Climatic protection and emission trading (Rainer Wolf); (d) Nuclear energy - suicide mission or glimmer of hope (Michael Hietschold); (e) Energetic questions in areas near to the area (Martin Maslaton); (f) Climatic protection and renewable energy sources in the Vogtland district - State of the art and problems (Tobias Pohl); (g) Complex reconstruction of plate buildings - economic and energetic potential (Jan Antonin); (h) Ecologic forms of traffic and their preferential treatment in metropolises (Jana Halirova); (i) Utilization of renewable energy sources in air traffic (Rosina Kasica); (j) Smart Metering - on the way to an economical technology? (Uwe Goetze); (k) Integration of an enhanced number of electric vehicles in the low voltage network (Jens Teuscher); (l) Intelligent electric cars and the concept of green energy (Zdenek Votruba); (m) Smart grids under the conditions of Czech Republic (Petr Marecek); (n) Possibilities of utilization of nuclear power plants as a source for a central heat supply of neighbouring agglomerations - with focus on Czech Republic (Tomas Kralik).

  13. Energy Efficiency Building Code for Commercial Buildings in Sri Lanka

    Energy Technology Data Exchange (ETDEWEB)

    Busch, John; Greenberg, Steve; Rubinstein, Francis; Denver, Andrea; Rawner, Esther; Franconi, Ellen; Huang, Joe; Neils, Danielle

    2000-09-30

    1.1.1 To encourage energy efficient design or retrofit of commercial buildings so that they may be constructed, operated, and maintained in a manner that reduces the use of energy without constraining the building function, the comfort, health, or the productivity of the occupants and with appropriate regard for economic considerations. 1.1.2 To provide criterion and minimum standards for energy efficiency in the design or retrofit of commercial buildings and provide methods for determining compliance with them. 1.1.3 To encourage energy efficient designs that exceed these criterion and minimum standards.

  14. Energy Efficiency Building Code for Commercial Buildings in Sri Lanka

    International Nuclear Information System (INIS)

    Busch, John; Greenberg, Steve; Rubinstein, Francis; Denver, Andrea; Rawner, Esther; Franconi, Ellen; Huang, Joe; Neils, Danielle

    2000-01-01

    1.1.1 To encourage energy efficient design or retrofit of commercial buildings so that they may be constructed, operated, and maintained in a manner that reduces the use of energy without constraining the building function, the comfort, health, or the productivity of the occupants and with appropriate regard for economic considerations. 1.1.2 To provide criterion and minimum standards for energy efficiency in the design or retrofit of commercial buildings and provide methods for determining compliance with them. 1.1.3 To encourage energy efficient designs that exceed these criterion and minimum standards

  15. PHYSICAL AND MECHANICAL CHARACTERISTICS OF BUILDING MATERIALS OF HISTORIC BUILDINGS

    Directory of Open Access Journals (Sweden)

    Jiří Witzany

    2017-12-01

    Full Text Available The article presents partial results of laboratory research into physical and mechanical characteristics of materials most commonly used as walling units in masonry structures of historic and heritage buildings. Core boreholes and specimens for the laboratory research of selected characteristics were sampled from accessible places of historic buildings, which had not been restored or reconstructed. The results of the research brought new knowledge about the unreliability (variance of the properties of historical, mainly natural building materials, and, at the same time, pointed out the need for further research and extension of knowledge necessary for the assessment of residual physical and mechanical characteristics of historic masonry structures.

  16. Better Buildings Neighborhood Program: BetterBuildings Lowell Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Heslin, Thomas

    2014-01-31

    The City of Lowell set four goals at the beginning of the Better Buildings Neighborhood Program: 1. Improve the Downtown Historic Park District’s Carbon Footprint 2. Develop a sustainable and replicable model for energy efficiency in historic buildings 3. Create and retain jobs 4. Promote multi-stakeholder partnerships The City of Lowell, MA was awarded $5 million in May 2010 to conduct energy efficiency retrofits within the downtown National Historical Park (NHP). The City’s target was to complete retrofits in 200,000 square feet of commercial space and create 280 jobs, while adhering to the strict historical preservation regulations that govern the NHP. The development of a model for energy efficiency in historic buildings was successfully accomplished. BetterBuildings Lowell’s success in energy efficiency in historic buildings was due to the simplicity of the program. We relied strongly on the replacement of antiquated HVAC systems and air sealing and a handful of talented energy auditors and contractors. BetterBuildings Lowell was unique for the Better Buildings Neighborhood Program because it was the only program that focused solely on commercial properties. BetterBuildings Lowell did target multi-family properties, which were reported as commercial, but the majority of the building types and uses were commercial. Property types targeted were restaurants, office buildings, museums, sections of larger buildings, mixed use buildings, and multifamily buildings. This unique fabric of building type and use allows for a deeper understanding to how different properties use energy. Because of the National Historical Park designation of downtown Lowell, being able to implement energy efficiency projects within a highly regulated historical district also provided valuable research and precedent proving energy efficiency projects can be successfully completed in historical districts and historical buildings. Our program was very successful in working with the local

  17. Building control. Technical building systems: Automation and management; Building Control. Technische Gebaeudesysteme: Automation und Bewirtschaftung

    Energy Technology Data Exchange (ETDEWEB)

    Kranz, H.R.; Baenninger, M.; Bieler, P.; Brettschneider, J.P.; Damnig, A.; Fassbender, H.W.; Friedrichs, K.; Gauchel, J.; Hegewald, B.; Kaelin, W.; Lezius, A.; Markert, H.; Oehler, A.; Otto, J.; Puettmer, M. Jr.; Rohrbacher, H.; Schuerdt, K.; Vogt, D.; Wittling, J.

    1995-12-31

    Cost-optimised management and maintenance of buildings can no longer be carried out without electronic data processing. The present anthology gives a comprehensive overview of the planning and operation of building automation systems. The following topics are discussed: ecological cooling and facade concepts, facility management, jeopardy alarm technology, building automation, communication technology, open communication and networks, building system technology, norms and directives, building right and law. A special abstract has been prepared for each of the 23 chapters. (BWI). 260 figs., 161 refs. [Deutsch] Kostenoptimiertes Management, Bewirtschaftung und Instandhaltung von Gebaeuden sind ohne EDV nicht mehr denkbar. Das vorliegende Buch gibt einen umfassenden Ueberblick ueber Planung und Betrieb von Gebaeudeautomationssystemen. Es wird dabei auf folgende Themenkomplexe eingegangen: Oekologische Kuehl- und Fassadenkonzepte; Facility Management, Gefahrenmeldetechnik, Gebaeudeautomation; Kommunikationstechnik, offenen Kommunikation und Netzwerke; Gebaeudesystemtechnik und Installationsbus; Energiemanagement; Betreibererfahrungen; Normen und Richtlinien; Baurecht und Gesetz. Fuer alle 23 Einzelkapitel wurde eine gesonderte inhaltliche Erschliessung durchgefuehrt. (BWI)

  18. Green buildings need good ergonomics.

    Science.gov (United States)

    Hedge, A; Dorsey, J A

    2013-01-01

    A retrospective post-occupancy evaluation survey of 44 occupants in two Leadership in Energy and Environmental Design (LEED) Platinum buildings on a US college campus is reported. The Internet survey covered a range of indoor environment and ergonomics issues. Results show that working in these buildings were a generally positive experience for their health, performance and satisfaction. However, in one building there were persistent issues of variability in air temperature, air freshness, air quality and noise that affected the perceived health and performance of the occupants. Although the buildings were energy-efficient and sustainable structures, ergonomics design issues were identified. Implications for the role of ergonomics in green buildings and in the US LEED rating system are discussed. This survey identified a number of ergonomics design issues present in the LEED Platinum energy-efficient and sustainable buildings that were studied. These results highlight the importance of integrating ergonomics design into green buildings as a component in the US LEED rating system.

  19. Building 774: open for business

    CERN Multimedia

    CERN Bulletin

    2015-01-01

    In July 2012, the demolition of Building 936 on the Prévessin site marked the start of the Building 774 project. On 23 February, less than three years later, the new 3900 m2 building was handed over to the BE department.   The brand new Building 774. (Credits: Francesco Soppelsa) Located near to the CERN Control Centre, Building 774 contains offices, laboratories and meeting rooms, as well as a huge public area consisting of a 104-seat auditorium, a changing room/shower area in the basement and a pleasant cafeteria open from 8 a.m. to 5 p.m., offering a wide range of refreshments including hot meals at lunchtime. “There were a few twists and turns during the construction of this building, but it all turned out well in the end!" says Michael Poehler, a member of the GS-SE group and the technical coordinator of the project. (Credits: Francesco Soppelsa) The 120 occupants of the building have just moved into their brand new home, bringing all the members of the...

  20. Sustainable Building Life Cycle Design

    Directory of Open Access Journals (Sweden)

    Ginzburg Alexander

    2016-01-01

    Full Text Available The current building life cycle management system in the Russian Federation is a family of discrete subsystems that exist independently for different building life cycle stages. In this situation building reliability and sustainable functioning are out of the question. The implementation of a united information model (BIM-model intended to describe building entire life cycle will allow to raise the sustainability, but this will happen only if goals and concerns of all participants of the project process are properly coordinated. An important figure of process sustainability is the organizational and technological reliability (OTR that describes the possibility of a system to reach a goal. In case of building life cycle design, the economical efficiency of a building can be considered as the goal. The required technical, ecological, organizational, and other parameters form a complex of constraints that determine the area of allowable values for building functioning. In its broad meaning, OTR may be understood as the probability of receiving an economical effect based on the value of organizational and economical reliability (OER.

  1. Buildings-to-Grid Technical Opportunities: From the Buildings Perspective

    Energy Technology Data Exchange (ETDEWEB)

    Kiliccote, Sila [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Piette, Mary Ann [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2014-03-28

    This paper describes technologies and systems needed to transform buildings from the current state of siloed resources into transparent, reliable resources that participate in and benefit from an integrated "transactive energy" system.

  2. Environmental Evaluation of Building Materials of 5 Slovak Buildings

    Science.gov (United States)

    Porhincak, Milan; Estokova, Adriana

    2013-11-01

    Building activity has recently led to the deterioration of environment and has become unsustainable. Several strategies have been introduced in order to minimize consumption of energy and resulting CO2 emissions having their origin in the operational phase. But also other stages of Life Cycle should are important to identify the overall environmental impact of construction sector. In this paper 5 similar Slovak buildings (family houses) were analyzed in terms of environmental performance of building materials used for their structures. Evaluation included the weight of used materials, embodied energy and embodied CO2 and SO2 emissions. Analysis has proven that the selection of building materials is an important factor which influences the environmental profile. Findings of the case study indicated that materials like concrete, ceramic or thermal insulation materials based on polystyrene and mineral wool are ones with the most negative environmental impact.

  3. Digital Handover of Data from Building Projects to Building Operation

    DEFF Research Database (Denmark)

    Jensen, Per Anker

    2006-01-01

    pro-jects to building operation. This project started in 2004 with research and analyses fol-lowed by development of a proposal for client requirements and in 2005 a first test on a real construction project has been carried out. After revision of the requirements a second test will be started early...... and construction and on the other side in building opera-tion and facilities management. In Denmark the government has launched a development program called Digital Construction and one of the projects concerns specifying require-ments for building clients in relation to digital handover of data from construction...... by a consortium called DACaPo consisting of a building client/facilities manager, a consulting company, a contractor and a university institute. This paper presents some of the results from the project with the main focus on the initial research....

  4. Build and Execute Environment

    Energy Technology Data Exchange (ETDEWEB)

    2017-04-21

    At exascale, the challenge becomes to develop applications that run at scale and use exascale platforms reliably, efficiently, and flexibly. Workflows become much more complex because they must seamlessly integrate simulation and data analytics. They must include down-sampling, post-processing, feature extraction, and visualization. Power and data transfer limitations require these analysis tasks to be run in-situ or in-transit. We expect successful workflows will comprise multiple linked simulations along with tens of analysis routines. Users will have limited development time at scale and, therefore, must have rich tools to develop, debug, test, and deploy applications. At this scale, successful workflows will compose linked computations from an assortment of reliable, well-defined computation elements, ones that can come and go as required, based on the needs of the workflow over time. We propose a novel framework that utilizes both virtual machines (VMs) and software containers to create a workflow system that establishes a uniform build and execution environment (BEE) beyond the capabilities of current systems. In this environment, applications will run reliably and repeatably across heterogeneous hardware and software. Containers, both commercial (Docker and Rocket) and open-source (LXC and LXD), define a runtime that isolates all software dependencies from the machine operating system. Workflows may contain multiple containers that run different operating systems, different software, and even different versions of the same software. We will run containers in open-source virtual machines (KVM) and emulators (QEMU) so that workflows run on any machine entirely in user-space. On this platform of containers and virtual machines, we will deliver workflow software that provides services, including repeatable execution, provenance, checkpointing, and future proofing. We will capture provenance about how containers were launched and how they interact to annotate

  5. Competence building capacity shortage

    International Nuclear Information System (INIS)

    Doorman, Gerard; Wangensteen, Ivar; Bakken, Bjoern

    2005-02-01

    The objective of the project 'Competence Building Capacity Shortage' has been 'to increase knowledge about central approaches aimed at solving the peaking capacity problem in restructured power systems'. With respect to reserve markets, a model was developed in the project to analyze the relations between reserve requirements and prices in the spot and reserve markets respectively. A mathematical model was also developed and implemented, which also includes the balance market, and has a good ability to predict the relations between these markets under various assumptions. With some further development, this model can be used fore realistic analyses of these markets in a Nordic context. It was also concluded that certain system requirements with respect to frequency and time deviation can be relaxed without adverse effects. However, the requirements to system bias, Frequency Activated Operating Reserves and Frequency Activated Contingency Reserves cannot be relaxed, the latter because they must cover the dimensioning fault in the system. On the other hand, Fast Contingency Reserves can be reduced by removing requirements to national balances. Costs can furthermore be reduced by increasingly adapting a Nordic as opposed to national approach. A model for stepwise power flow was developed in the project, which is especially useful to analyze slow power system dynamics. This is relevant when analysing the effects of reserve requirements. A model for the analysis of the capacity balance in Norway and Sweden was also developed. This model is useful for looking at the future balance under various assumptions regarding e.g. weather conditions, demand growth and the development of the generation system. With respect to the present situation, if there is some price flexibility on the demand side and system operators are able to use reserves from the demand side, the probability for load shedding during the peak load hour is close to zero under the weather conditions after

  6. Toward a virtual building laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Klems, J.H.; Finlayson, E.U.; Olsen, T.H.; Banks, D.W.; Pallis, J.M.

    1999-03-01

    In order to achieve in a timely manner the large energy and dollar savings technically possible through improvements in building energy efficiency, it will be necessary to solve the problem of design failure risk. The most economical method of doing this would be to learn to calculate building performance with sufficient detail, accuracy and reliability to avoid design failure. Existing building simulation models (BSM) are a large step in this direction, but are still not capable of this level of modeling. Developments in computational fluid dynamics (CFD) techniques now allow one to construct a road map from present BSM's to a complete building physical model. The most useful first step is a building interior model (BIM) that would allow prediction of local conditions affecting occupant health and comfort. To provide reliable prediction a BIM must incorporate the correct physical boundary conditions on a building interior. Doing so raises a number of specific technical problems and research questions. The solution of these within a context useful for building research and design is not likely to result from other research on CFD, which is directed toward the solution of different types of problems. A six-step plan for incorporating the correct boundary conditions within the context of the model problem of a large atrium has been outlined. A promising strategy for constructing a BIM is the overset grid technique for representing a building space in a CFD calculation. This technique promises to adapt well to building design and allows a step-by-step approach. A state-of-the-art CFD computer code using this technique has been adapted to the problem and can form the departure point for this research.

  7. Consumer Central Energy Flexibility in Office Buildings

    DEFF Research Database (Denmark)

    Billanes, Joy Dalmacio; Ma, Zheng; Jørgensen, Bo Nørregaard

    2017-01-01

    Energy flexibility in buildings will play an important role in the smart energy system. Office buildings have more potentials to provide energy flexibility to the grid compared to other types of buildings, due to the existing building management, control systems and large energy consumption....... Consumers in office buildings (building owners/managers and occupants) take a main role for adopting and engaging in building energy flexibility. In this paper provides a systematic review of consumer central energy flexibility in office buildings with the discussion of social, technical and business...... can boost energy flexibility in the office buildings....

  8. Extension and validation of ARTM (atmospheric radionuclide transportation model) for the application as dispersion calculation model in AVV (general administrative provision) and SBG (incident calculation bases); Erweiterung und Validierung von ARTM fuer den Einsatz als Ausbreitungsmodell in AVV und SBG

    Energy Technology Data Exchange (ETDEWEB)

    Martens, Reinhard; Bruecher, Wenzel; Richter, Cornelia; Sentuc, Florence; Sogalla, Martin; Thielen, Harald

    2012-02-15

    In the medium-term time scale the Gaussian plume model used so far for atmospheric dispersion calculations in the General Administrative Provision (AVV) relating to Section 47 of the Radiation Protection Ordinance (StrISchV) as well as in the Incident Calculation Bases (SGB) relating to Section 49 StrISchV is to be replaced by a Lagrangian particle model. Meanwhile the Atmospheric Radionuclide Transportation Model (ARTM) is available, which allows the simulation of the atmospheric dispersion of operational releases from nuclear installations. ARTM is based on the program package AUSTAL2000 which is designed for the simulation of atmospheric dispersion of nonradioactive operational releases from industrial plants and was adapted to the application of airborne radioactive releases. In the context of the research project 3608S05005 possibilities for an upgrade of ARTM were investigated and implemented as far as possible to the program system. The work program comprises the validation and evaluation of ARTM, the implementation of technical-scientific extensions of the model system and the continuation of experience exchange between developers and users. In particular, the suitability of the model approach for simulations of radiological consequences according to the German SBG and the representation of the influence of buildings typical for nuclear power stations have been validated and further evaluated. Moreover, post-processing modules for calculation of dose-relevant decay products and for dose calculations have been developed and implemented. In order to continue the experience feedback and exchange, a web page has been established and maintained. Questions by users and other feedback have been dealt with and a common workshop has been held. The continued development and validation of ARTM has strengthened the basis for applications of this model system in line with the German regulations AVV and SBG. Further activity in this field can contribute to maintain and

  9. ImBuild: Impact of building energy efficiency programs

    Energy Technology Data Exchange (ETDEWEB)

    Scott, M.J.; Hostick, D.J.; Belzer, D.B.

    1998-04-01

    As part of measuring the impact of government programs on improving the energy efficiency of the Nation`s building stock, the Department of Energy Office of Building Technology, State and Community Programs (BTS) is interested in assessing the economic impacts of its portfolio of programs, specifically the potential impact on national employment and income. The special-purpose version of the IMPLAN model used in this study is called ImBuild. In comparison with simple economic multiplier approaches, such as Department of Commerce RIMS 2 system, ImBuild allows for more complete and automated analysis of the economic impacts of energy efficiency investments in buildings. ImBuild is also easier to use than existing macroeconomic simulation models. The authors conducted an analysis of three sample BTS energy programs: the residential generator-absorber heat exchange gas heat pump (GAX heat pump), the low power sulfur lamp (LPSL) in residential and commercial applications, and the Building America program. The GAX heat pump would address the market for the high-efficiency residential combined heating and cooling systems. The LPSL would replace some highly efficient fluorescent commercial lighting. Building America seeks to improve the energy efficiency of new factory-built, modular, manufactured, and small-volume, site-built homes through use of systems engineering concepts and early incorporation of new products and processes, and by increasing the demand for more energy-efficient homes. The authors analyze a scenario for market penetration of each of these technologies devised for BTS programs reported in the BTS GPRA Metrics Estimates, FY99 Budget Request, December 19, 1997. 46 figs., 4 tabs.

  10. Straw insulated buildings. Nature building materials; Strohgedaemmte Gebaeude. Naturbaustoffe

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-06-01

    Straw is one of the major agricultural by-products and is mainly used as litter in animal husbandry and to compensate the balance of humus. A relatively recent development is the use of straw bales for the construction of buildings. The brochure under consideration documents the technical development of straw construction in Germany. Possibilities of the use of straw in single family homes up to commercial buildings are described.

  11. National Green Building Standard Analysis

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2012-07-01

    DOE's Building America Program is a research and development program to improve the energy performance of new and existing homes. The ultimate goal of the Building America Program is to achieve examples of cost-effective, energy efficient solutions for all U.S. climate zones. Periodic maintenance of an ANSI standard by review of the entire document and action to revise or reaffirm it on a schedule not to exceed five years is required by ANSI. In compliance, a consensus group has once again been formed and the National Green Building Standard is currently being reviewed to comply with the periodic maintenance requirement of an ANSI standard.

  12. Energy - efficient buildings in pakistan

    International Nuclear Information System (INIS)

    Sohail, M.; Qureshi, M.U.D.

    2011-01-01

    Pakistan is one of the countries with the highest energy consumption for domestic use. Annual energy consumption by the domestic sector is 45.9 % of the total, while the industrial sector, consumes about 27.5%. About half of the total energy consumed is used in buildings and/or heating, ventilation and air-conditioning (HVAC) and lighting appliances. The energy consumed for the same purposes in China and UK is 25 to 30 % and 40 %, respectively, even in extreme weather conditions. Energy deficiency in Pakistan is approximately 5,000 MWe, which results in worst load-shedding in summers and, lately, even in winters. Building new energy sources like dams, coal power plants and renewable energy power projects are some possible solutions, but these are time taking and need at least 2 to 6 years to complete, depending upon the nature of the project. Fast development of energy-efficient buildings is, therefore, necessary to deal with exacerbating energy-crisis and related environmental impact in Pakistan. Innovations in the prevailing building-design will help the country in reducing the energy burden. These innovations may include improved architectural designs, energy-efficient building materials, electrical appliances and implementation of building energy-efficiency codes. In 1987, the National Energy Conservation Centre (ENERCON), was established under Ministry of Environment, Government of Pakistan, with the aim to build awareness among the masses for energy conservation, and to make policies regarding energy-conservation structures in the country. But no policy regarding building energy codes has been introduced by ENERCON till now. In collaboration with Pakistan Engineering Council (PEC), ENERCON has recently finalized the Building Energy Code of Pakistan Energy Provisions 2011 for which statutory notification is under process for necessary amendment in the building by-laws. The implementation of this Energy Code will result in 25 to 30 % of energy savings in the

  13. Understanding Net Zero Energy Buildings

    DEFF Research Database (Denmark)

    Salom, Jaume; Widén, Joakim; Candanedo, José

    2011-01-01

    Although several alternative definitions exist, a Net-Zero Energy Building (Net ZEB) can be succinctly described as a grid-connected building that generates as much energy as it uses over a year. The “net-zero” balance is attained by applying energy conservation and efficiency measures...... and by incorporating renewable energy systems. While based on annual balances, a complete description of a Net ZEB requires examining the system at smaller time-scales. This assessment should address: (a) the relationship between power generation and building loads and (b) the resulting interaction with the power grid...

  14. Building and Testing with Gradle

    CERN Document Server

    Berglund, Tim

    2011-01-01

    Build and test software written in Java and many other languages with Gradle, the open source project automation tool that's getting a lot of attention. This concise introduction provides numerous code examples to help you explore Gradle, both as a build tool and as a complete solution for automating the compilation, test, and release process of simple and enterprise-level applications. Discover how Gradle improves on the best ideas of Ant, Maven, and other build tools, with standards for developers who want them and lots of flexibility for those who prefer less structure. Use Gradle with Gr

  15. 10 CFR 434.520 - Speculative buildings.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Speculative buildings. 434.520 Section 434.520 Energy... RESIDENTIAL BUILDINGS Building Energy Cost Compliance Alternative § 434.520 Speculative buildings. 520... for the lighting power provided for the common areas of the building. 520.4Documentation for future...

  16. 7 CFR 1726.150 - Headquarters buildings.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false Headquarters buildings. 1726.150 Section 1726.150... AGRICULTURE ELECTRIC SYSTEM CONSTRUCTION POLICIES AND PROCEDURES Buildings § 1726.150 Headquarters buildings. This section includes headquarters buildings such as warehouses and equipment service type buildings...

  17. Energy efficiency buildings program, FY 1980

    Energy Technology Data Exchange (ETDEWEB)

    1981-05-01

    A separate abstract was prepared on research progress in each group at LBL in the energy efficient buildings program. Two separate abstracts were prepared for the Windows and Lighting Program. Abstracts prepared on other programs are: Energy Performance of Buildings; Building Ventilation and Indoor Air Quality Program; DOE-21 Building Energy Analysis; and Building Energy Data Compilation, Analysis, and Demonstration. (MCW)

  18. Development of a prototype fresh-air window to be used in combination with off-air systems, especially for modernisation of multistorey apartment buildings; Entwicklung des Prototypes eines Zuluftfensters fuer den Einsatz in Verbindung mit Abluftanlagen, insbesondere bei der Sanierung von mehrgeschossigen Mietwohngebaeuden

    Energy Technology Data Exchange (ETDEWEB)

    Gronau, H.J.; Helbig, S. [Weimar Univ. (Germany). Materialforschungs- und Pruefanstalt

    1997-12-31

    Off-air systems depend on whether there is a sufficient supply of fresh air. This research project aims to develop a prototype of a fresh-air element in the form of a three-pane composite window. The state of progress, results of the numerical studies, and problems encountered are reported. (MSK) [Deutsch] Da Abluftanlagen von einer hinreichend gesicherten Zuluftversorgung abhaengig sind, ist es das Ziel dieses Forschungsvorhabens, den Prototyp eines Zuluftelements in Form eines 3-Scheiben-Verbundfensters zu entwickeln. Im Folgenden werden der Stand der Arbeiten, die Ergebnisse der numerischen Untersuchungen sowie auftretende Probleme erlaeutert.

  19. BREEAM [Building Research Establishment Environmental Assessment Method] BRE [Building Research Establishment] assessment method for buildings

    International Nuclear Information System (INIS)

    Baldwin, R.

    1994-01-01

    Buildings account for a large share of environmental impacts in their construction, use, and demolition. In western Europe, buildings account for ca 50% of primary energy use (hence CO 2 output), far outweighing the contribution of the transport and industrial sectors. Other impacts from building energy use include the use of chemicals such as chlorofluorocarbons for cooling. In the United Kingdom, the Building Research Establishment (BRE) has developed a certificate system for environmental labelling of buildings so that the performance of the building against a set of defined environmental criteria can be made visible to clients. This system thus rewards positive actions to improve the environmental performance of buildings and assists in marketing to an environmentally aware clientele. Issues included in assessments for awarding the certificate are addressed under three main headings: global issues and use of resources, local issues, and indoor issues. Global issues include ozone depletion and CO 2 emissions; local issues include public health and water conservation; and indoor issues include air quality and lighting. 8 refs., 1 tab

  20. Green Building and School Construction.

    Science.gov (United States)

    DiNola, Ralph; Guerra, Jerry

    2002-01-01

    Discusses the benefits of green, or high-performance, buildings, such as health and comfort, cost effectiveness, and sustainability. Explores the barriers to their use by schools--most notably cost. Offers suggestions on overcoming these barriers. (EV)

  1. Building 107 for surface treatment

    CERN Multimedia

    Brice, Maximilien

    2018-01-01

    A brand new state-of-the-art building hosting laboratories for the surface treatment of vacuum equipment and workshops for the manufacturing and treatment of printed circuit boards was completed in 2017.

  2. Rise of the build infrastructure

    International Nuclear Information System (INIS)

    Eulisse, Giulio; Muzaffar, Shahzad; Abdurachmanov, David; Mendez, David

    2014-01-01

    CMS Offline Software, CMSSW, is an extremely large software project, with roughly 3 millions lines of code, two hundreds of active developers and two to three active development branches. Given the scale of the problem, both from a technical and a human point of view, being able to keep on track such a large project, bug free, and to deliver builds for different architectures is a challenge in itself. Moreover the challenges posed by the future migration of CMSSW to multithreading also require adapting and improving our QA tools. We present the work done in the last two years in our build and integration infrastructure, particularly in the form of improvements to our build tools, in the simplification and extensibility of our build infrastructure and the new features added to our QA and profiling tools. Finally we present our plans for the future directions for code management and how this reflects on our workflows and the underlying software infrastructure.

  3. LCG/AA build infrastructure

    International Nuclear Information System (INIS)

    Hodgkins, Alex Liam; Diez, Victor; Hegner, Benedikt

    2012-01-01

    The Software Process and Infrastructure (SPI) project provides a build infrastructure for regular integration testing and release of the LCG Applications Area software stack. In the past, regular builds have been provided using a system which has been constantly growing to include more features like server-client communication, long-term build history and a summary web interface using present-day web technologies. However, the ad-hoc style of software development resulted in a setup that is hard to monitor, inflexible and difficult to expand. The new version of the infrastructure is based on the Django Python framework, which allows for a structured and modular design, facilitating later additions. Transparency in the workflows and ease of monitoring has been one of the priorities in the design. Formerly missing functionality like on-demand builds or release triggering will support the transition to a more agile development process.

  4. Guidelines on Building Regulations 2008

    DEFF Research Database (Denmark)

    Thse guidelines clarify and intepret the provisions of the Building Regulations of 2008 (BR08). The Guidelines, which match BR08 in terms of organisation into Parts, are accompanied by the full text of the regulations and the explanatory notes issued by the Danish Enterprise and Construction...... Authority. The Guidelines refer the reader to sources such as relevant standards, instructions and other background material which provides more detailed information. The Guidelines cover the same ground as BR08, including building control regulations, layout, fitting out, structures, fire safety, indoor...... climate, energy consumotion and services. The Guidelines are aimed at all professionals involved in building projects, particularly building design consultants, contractors and municipal application officers....

  5. Model building and new particles

    International Nuclear Information System (INIS)

    Frampton, P.H.

    1992-01-01

    After an outline of the Standard Model, indications of new physics beyond it are discussed. The nature of model building is illustrated by three examples which predict, respectively, new particles called the axigluon, sarks and the aspon. (author). 11 refs

  6. Classification of Building Object Types

    DEFF Research Database (Denmark)

    Jørgensen, Kaj Asbjørn

    2011-01-01

    made. This is certainly the case in the Danish development. Based on the theories about these abstraction mechanisms, the basic principles for classification systems are presented and the observed misconceptions are analyses and explained. Furthermore, it is argued that the purpose of classification...... systems has changed and that new opportunities should be explored. Some proposals for new applications are presented and carefully aligned with IT opportunities. Especially, the use of building modelling will give new benefits and many of the traditional uses of classification systems will instead...... be managed by software applications and on the basis of building models. Classification systems with taxonomies of building object types have many application opportunities but can still be beneficial in data exchange between building construction partners. However, this will be performed by new methods...

  7. Armstrong's Building 703 in Palmdale

    Data.gov (United States)

    Federal Laboratory Consortium — NASA Armstrong Flight Research Center's (AFRC) Building 703 is located in Palmdale, Calif., 70 miles northeast of downtown Los Angeles. NASA has leased the facility,...

  8. Women and Nation-Building

    National Research Council Canada - National Science Library

    Benard, Cheryl; Jones, Seth G; Oliker, Olga; Thurston, Cathryn Q; Stearns, Brooke K; Cordell, Kristen

    2008-01-01

    .... The RAND Corporation has contributed to the emerging knowledge base in this domain through a series of studies that have looked at nation-building enterprises led by the United States and others...

  9. Defining net zero energy buildings

    CSIR Research Space (South Africa)

    Jonker Klunne, W

    2013-01-01

    Full Text Available Worldwide increasing attention to energy consumption and associated environmental impacts thereof has resulted in a critical attitude towards energy usage of building. Increasing costs of energy and dependence on energy service providers add...

  10. 324 Building Baseline Radiological Characterization

    Energy Technology Data Exchange (ETDEWEB)

    R.J. Reeder, J.C. Cooper

    2010-06-24

    This report documents the analysis of radiological data collected as part of the characterization study performed in 1998. The study was performed to create a baseline of the radiological conditions in the 324 Building.

  11. Building the Encyclopedia of Life

    Science.gov (United States)

    Mangiafico, P. A.; Patterson, D. J.

    2010-04-01

    The Encyclopedia of Life (EOL) is a collaborative project that indexes information about species, and makes it freely accessible to anyone. In order to accomplish this, EOL is building collaborative tools and infrastructure to unify the information.

  12. Natural radioactivity of building materials

    International Nuclear Information System (INIS)

    Mrnustik, J.

    1988-01-01

    Within a study of the natural radioactivity of building materials, coefficients were determined of the emanation from selected materials and raw materials, such as porous concrete, bricks, marlite, quartzite, etc. Measurements were made of ground samples using Lucas scintillation chambers which give an accuracy of determination of the coefficient of about 10%. Specific radium activity was also determined for the samples. Tabulated is a comparison of the average specific activity of radium in concrete, power plant ash and porous concrete in Czechoslovakia and abroad. It is stated that monitoring the content of natural radionuclides in building materials is an indispensable part of the production process in the building industry, this with regard to the radiation protection of the population. This will be enhanced by the new Czechoslovak standard determining methods of measuring the content of natural radionuclides and the coefficient of radon emanation, and the subsequent evaluation of the properties of building materials. (Z.M.) 3 figs., 3 tabs

  13. 77 FR 2296 - Office of Federal High-Performance Green Buildings; the Green Building Advisory Committee...

    Science.gov (United States)

    2012-01-17

    ... Federal High-Performance Green Buildings; the Green Building Advisory Committee; Notification of Upcoming... teleconference meetings of the Green Building Advisory Committee (the Committee). The teleconference meetings are... Federal High Performance Green Buildings, Office of Governmentwide Policy, General Services Administration...

  14. Better building of valley fills

    Energy Technology Data Exchange (ETDEWEB)

    Chironis, N.P.

    1980-03-01

    Current US regulations for building valley fills or head of hollow fills to hold excess spoil resulting from contour mining are meeting with considerable opposition, particularly from operators in steep-slope areas. An alternative method has been submitted to the Office of Surface Mining by Virgina. Known as the zoned concept method, it has already been used successfully in building water-holding dams and coal refuse embankments on sloping terrain. The ways in which drainage and seepage are managed are described.

  15. Building a Brand for Finna

    OpenAIRE

    Maar, Vivika

    2014-01-01

    This thesis deals with building a brand for Finna, a new digital library service with joint interfaces. The Public Interface of Finna is a new service in the brand architecture of the National Library of Finland and provides access to the digital information and services of libraries, archives, museums, serving those who seek information or experiences. The thesis is based on structural interviews that were conducted for the purpose of gathering information for the brand building process...

  16. Daylight utilisation in office buildings

    DEFF Research Database (Denmark)

    Christoffersen, Jens

    This Ph.D. thesis presents the qualitative and quantitative consequences of full-scale measurements on two daylighting systems, light shelf and Venetian blinds. The systems were investigated to assess their ability to increase daylight penetration and improve daylight distribution in the interior...... the benefits and difficulties regarding use of daylight in office buildings, but it is hoped that the report will provide daylight conscious building design in forthcoming non-domestic buil dings....

  17. Building America House Simulation Protocols

    Energy Technology Data Exchange (ETDEWEB)

    Hendron, Robert [National Renewable Energy Lab. (NREL), Golden, CO (United States); Engebrecht, Cheryn [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2010-09-01

    The House Simulation Protocol document was developed to track and manage progress toward Building America's multi-year, average whole-building energy reduction research goals for new construction and existing homes, using a consistent analytical reference point. This report summarizes the guidelines for developing and reporting these analytical results in a consistent and meaningful manner for all home energy uses using standard operating conditions.

  18. A Novel Tetrathiafulvalene Building Block

    DEFF Research Database (Denmark)

    Jeppesen, Jan Oskar; Takimiya, Kazuo; Thorup, Niels

    1999-01-01

    Efficient synthesis of a novel tetrathiafulvalene building block. 2,3-bis(2-cyanoethylthio)-6,7-bis(thiocyanato-methyl)tetrathiafulv alene (7) useful for stepwise and asymmetrical bis-function-alization is reported.......Efficient synthesis of a novel tetrathiafulvalene building block. 2,3-bis(2-cyanoethylthio)-6,7-bis(thiocyanato-methyl)tetrathiafulv alene (7) useful for stepwise and asymmetrical bis-function-alization is reported....

  19. A Guide to Building Commissioning

    Energy Technology Data Exchange (ETDEWEB)

    Baechler, Michael C.

    2011-09-01

    Commissioning is the process of verifying that a building's heating, ventilation, and air conditioning (HVAC) and lighting systems perform correctly and efficiently. Without commissioning, system and equipment problems can result in higher than necessary utility bills and unexpected and costly equipment repairs. This report reviews the benefits of commissioning, why it is a requirement for Leadership in Energy and Environmental Design (LEED) certification, and why building codes are gradually adopting commissioning activities into code.

  20. Studies on the use of SIR-C and X-SAR data for identification, demarcation, and assessment of forest ecosystems. Final report; Untersuchungen zum Einsatz von SIR-C und X-SAR Daten fuer die Identifizierung, Abgrenzung und Beurteilung von Waldoekosystemen. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Johlige, A.; Foerster, B.; Ammer, U.

    1997-12-31

    detailierte Signaturanalyse. Die Auswertungen im Supertestgebiet `Oberpfaffenhofen` fuehrten zu unbefriedigenden Ergebnissen bei der Unterscheidung verschiedener Waldoekosysteme. Als Gruende hierfuer werden die sehr heterogenen und kleinraeumigen Strukturen des Gebietes und das Fehlen von gelaendegeokodierten X, C- und L-Banddaten angesehen. Im zweiten Untersuchungsgebiet `Nationalpark Bayerischer Wald` standen in Form von Kombiprodukten geokodierte Daten aller drei Baender zur Verfuegung. Dadurch war eine Verminderung des Reliefeinflusses unter Einsatz der Maske der lokalen Einfallswinkel moeglich. Auch zeigte sich in diesem Fall eine erhoehte Unterscheidbarkeit innerhalb der bewaldeten Gebiete. Generell bleibt jedoch festzustellen, dass die tatsaechliche Bodenaufloesung fuer den Nutzer deutlich hinter der nominellen Aufloesung zurueckbleibt. Am meisten beeindruckt hat uns die hohe Wetterunabhaengigkeit der Radardaten. Alle hier bearbeiteten Daten entstanden unter Wetterbedingungen, bei denen optische Aufnahmen unmoeglich waren. (orig.)

  1. Combined use of contrast media containing iodine and gadolinium for imaging and intervention. A hitherto widely ignored topic in radiological practice; Kombinierter zeitnaher Einsatz jod- und gadoliniumhaltiger Kontrastmittel in der diagnostischen und interventionellen Radiologie. Ein bisher vernachlaessigtes Kapitel der radiologischen Praxis

    Energy Technology Data Exchange (ETDEWEB)

    Golder, W.

    2012-02-15

    The synchronous use of chemically different contrast media in the same body compartment is a challenge for the radiologist, whether it is scheduled or unexpected. However, to inject contrast media containing iodine and gadolinium at the same time can be a prerequisite for the examination of several organs or organ systems. Unlike other topics of contrast-enhanced imaging procedures, the difficulties encountered with double contrast injections have been widely ignored in the literature. In the absence of reliable data from experimental and clinical studies the radiologist is dependent on case reports, information provided by the contrast media manufacturers, personal communications, mostly scanty personal experiences and a skilful time management, in order to overcome the situation. Only the combination of X-ray, computed tomography and magnetic resonance arthrography can be performed without another thought. However, the more or less synchronous vascular application of contrast media containing iodine and gadolinium requires vigilance. The more seriously ill the patient is, the more caution is advised even if the decision on the combined administration has to be reached urgently. The following overview gives a description of the properties of contrast media containing iodine and gadolinium as far as interactions following simultaneous administration are concerned. Subsequently, the clinically relevant situations and constellations are outlined and analyzed. (orig.) [German] Die kombinierte Gabe zweier chemisch verschiedener Kontrastmittel stellt fuer den Radiologen eine Herausforderung dar. Der mehr oder weniger zeitgleiche Einsatz jod- und gadoliniumhaltiger Kontrastmittel kann sowohl geplant sein als auch bei der Untersuchung einer Reihe von Organen/Organsystemen unvorhergesehen notwendig werden. Im Gegensatz zu anderen Themen der kontrastverstaerkten Diagnostik ist dem Problem der Doppelinjektion in der Literatur bisher wenig Aufmerksamkeit geschenkt worden

  2. Studies on the use of SIR-C and X-SAR data for identification, demarcation, and assessment of forest ecosystems. Final report; Untersuchungen zum Einsatz von SIR-C und X-SAR Daten fuer die Identifizierung, Abgrenzung und Beurteilung von Waldoekosystemen. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Johlige, A; Foerster, B; Ammer, U

    1998-12-31

    detailierte Signaturanalyse. Die Auswertungen im Supertestgebiet `Oberpfaffenhofen` fuehrten zu unbefriedigenden Ergebnissen bei der Unterscheidung verschiedener Waldoekosysteme. Als Gruende hierfuer werden die sehr heterogenen und kleinraeumigen Strukturen des Gebietes und das Fehlen von gelaendegeokodierten X, C- und L-Banddaten angesehen. Im zweiten Untersuchungsgebiet `Nationalpark Bayerischer Wald` standen in Form von Kombiprodukten geokodierte Daten aller drei Baender zur Verfuegung. Dadurch war eine Verminderung des Reliefeinflusses unter Einsatz der Maske der lokalen Einfallswinkel moeglich. Auch zeigte sich in diesem Fall eine erhoehte Unterscheidbarkeit innerhalb der bewaldeten Gebiete. Generell bleibt jedoch festzustellen, dass die tatsaechliche Bodenaufloesung fuer den Nutzer deutlich hinter der nominellen Aufloesung zurueckbleibt. Am meisten beeindruckt hat uns die hohe Wetterunabhaengigkeit der Radardaten. Alle hier bearbeiteten Daten entstanden unter Wetterbedingungen, bei denen optische Aufnahmen unmoeglich waren. (orig.)

  3. Tribal Green Building Administrative Code Example

    Science.gov (United States)

    This Tribal Green Building Administrative Code Example can be used as a template for technical code selection (i.e., building, electrical, plumbing, etc.) to be adopted as a comprehensive building code.

  4. Green Buildings in Use: Post Occupancy Evaluations

    Science.gov (United States)

    Watson, Chris

    2007-01-01

    This article briefly describes users' experiences of two "green" education buildings. It goes on to conclude that stakeholders' negotiation of building performance is necessary to minimise environmental impact, just as it is necessary to achieve other aspects of building performance.

  5. Green buildings: A Mauritian built environment stakeholders ...

    African Journals Online (AJOL)

    The literature reviewed and results of a survey among professionals and contractors from the ... green building materials are more durable than traditional materials, resulting in ..... Building-construction methods for residential buildings include.

  6. IMCOM LONWORKS Building Automation Systems Implementation Strategy

    National Research Council Canada - National Science Library

    Schwenk, David M; Bush, Joseph; Hughes, Lucie M; Briggs, Stephen; White, Will

    2007-01-01

    Army Installations often expand their use of digital control systems for heating, ventilating, and air conditioning and other mechanical and electrical building systems on a building-by-building basis...

  7. Wood: a construction material for tall buildings

    Science.gov (United States)

    Wimmers, Guido

    2017-12-01

    Wood has great potential as a building material, because it is strong and lightweight, environmentally friendly and can be used in prefabricated buildings. However, only changes in building codes will make wood competitive with steel and concrete.

  8. 49 CFR 41.110 - New DOT owned buildings and additions to buildings.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false New DOT owned buildings and additions to buildings....110 New DOT owned buildings and additions to buildings. (a) DOT Operating Administrations responsible for the design and construction of new DOT Federally owned buildings will ensure that each building is...

  9. Building integration of PCM for natural cooling of buildings

    International Nuclear Information System (INIS)

    Álvarez, Servando; Cabeza, Luisa F.; Ruiz-Pardo, Alvaro; Castell, Albert; Tenorio, José Antonio

    2013-01-01

    Highlights: ► A brief overview of PCM solutions for buildings is provided. ► Some weaknesses of existing PCM solutions for buildings were identified. ► New solutions for PCM integration in buildings are proposed. ► Proposed solutions overcome identified weaknesses of existing solutions. - Abstract: The use of night cooling ventilation in addition of phase change materials (PCMs) is a very powerful strategy for reducing the cooling demand of buildings. Nevertheless, there are inherent drawbacks in the way things have been doing so far: (a) The limited area of contact between PCM and the air; (b) the very low convective heat transfer coefficients which prevents the use of significant amounts of PCM and (c) the very low utilization factor of the cool stored due to the large phase shift between the time when cool is stored and time when it is required by the building. In this paper, we present innovative solutions using PCM to overcome the above situation. Compared with existing solutions, innovative solutions proposed, increase the contact area between PCM and air by a factor of approximately 3.6, increase the convective heat transfer coefficient significantly, and improve the utilization factor due to the inclusion of active control systems which allow the cold stored be actually used when required

  10. Variation of radon exhalation on building materials

    International Nuclear Information System (INIS)

    Liu Fudong; Liu Senlin; Wang Chunhong; Pan Ziqiang; Zhang Yonggui; Ji Dong

    2009-01-01

    The 19 samples from different building material factories were collected for four kinds of building materials. The activity concentration and radon exhalation of building materials were measured. The radon exhalations of building materials are not obviously different if the component is same and the processes of building materials are similar. However, the radon exhalations of same kind of building material are greatly different if the components are different and the processes of building material are varied even if the activity concentrations of building material are similar. (authors)

  11. Brief Discussion on Green Building Materials

    International Nuclear Information System (INIS)

    Cai, Jia-wei; Sun, Jian

    2014-01-01

    With more and more emphasizes on the environment and resources, the concept of green buildings has been widely accepted. Building materials are vectors of architectures, only if green building materials and related technical means are used, can we construct green buildings to achieve the purpose of energy conservation and environmental protection. This paper introduces the relationship between green building materials and green buildings, the current situation of green building materials in China, as well as the measures to accelerate the development of green building materials

  12. Green commercial building insurance in Malaysia

    Science.gov (United States)

    Yang, Yu Xin Ou; Chew, Boon Cheong; Loo, Heoy Shin; Tan, Lay Hong

    2017-03-01

    Green building construction is growing tremendously globally even in Malaysia. Currently, there are approximate 636 buildings have registered and to be certified with Green Building Index. Among these buildings, 45 buildings have already fulfilled the requirements and fully certified. The other buildings still under provisional certification stage. Malaysia had adopted Green Building Index in 2009 to support a move to promote green building concept. Malaysia starts to move towards green building because Malaysian construction and building industry realizes that both energy consumed and waste produced are reduced without irreversible impacts to ecosystems. Consequently, insurance companies such as Fireman's Fund from America has started the green building insurance policies for their green building in the year of 2006, while Malaysia still remain the coverage for green buildings using conventional property insurance. There are lacks of efforts to be seen from insurance companies to propose green building insurance for these green buildings. There are a few factors which can take into consideration for insurance companies to start the very first green building insurance in Malaysia. Although there are challenges, some efficient strategies have been identified to overcome the problems. The methods used in this research topic is qualitative research. The results obtained shows that green commercial building insurance has a huge business opportunity in Malaysia because the number of green commercial buildings are increasing tremendously in Malaysia. It is a favor to implement green building insurance in Malaysia. Furthermore, insurance companies can consider to add in extra coverage in standard building policy to provide extra protection for non-certified green buildings which have the intention to rebuilt in green when damage happens. Generally, it is very important to introduce green commercial buildings insurance into Malaysia so that all of the green commercial

  13. Buildings and Health. Educational campaign for healthy buildings. Educational material

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    In recent years health and comfort problems associated with the indoor climate have come to constitute a problem in Sweden. To come to grips with this a nationwide educational campaign on Buildings and Health is being run. It is directed to those involved in planning, project design, construction and management of buildings. The objective is to convey a body of knowledge to the many occupational and professional groups in the construction sector on how to avoid indoor climate problems in homes, schools, offices and other workplaces. The campaign is being run by the Swedish National Board of Housing and Planning and the Swedish Council for Building Research, in co-operation with various organizations and companies in the construction industry, and with municipalities and authorities. The knowledge which is being disseminated through the campaign is summarized in this compendium. figs., tabs.

  14. Water sustainable management for buildings Water sustainable management for buildings

    Directory of Open Access Journals (Sweden)

    Juan Arturo Ocaña Ponce

    2013-01-01

    Full Text Available This paper presents a literature review article that deals with how to manage water in build­ings, specifically in facility projects, in ways to save water during the use, maintenance and operation of the building. This work is aimed at architects, builders and developers, and may be helpful for decision-making in the planning and management of efficient water use in buildings.Este trabajo es un artículo de revisión relacionado con el manejo y gestión del recurso agua, particularmente en proyectos de edificaciones, con el fin de propiciar ahorro de agua durante el uso, mantenimiento y operación del inmueble. Este documento está dirigido a arquitectos, constructores y desarrolladores inmobiliarios y puede ser de gran utilidad para la toma de decisiones en la fase de planeación y de gestión del uso eficiente del agua en los edificios.

  15. Building products for sustainable buildings; Bauprodukte fuer nachhaltige Gebaeude

    Energy Technology Data Exchange (ETDEWEB)

    Blumberg, Martin; Urbanek, Anja [brands und values GmbH, Bremen (Germany)

    2013-04-15

    In the light of the energy efficiency, sustainability and the increasing distribution of buildings certifications environmental product declarations have grown in significance. The environmental product declaration program for building products was organized by the Institute Construction and Environment e.V. (Koenigswinter, Federal Republic of Germany). Beside the definition of the product group specific requirements and certifications as well as an independent review process of the completed environmental product declarations, the Advisory Council guarantees that the program rules of the Institute Construction and Environment e.V. continue to develop in conformity to international standards.

  16. Smart Buildings and Demand Response

    Science.gov (United States)

    Kiliccote, Sila; Piette, Mary Ann; Ghatikar, Girish

    2011-11-01

    Advances in communications and control technology, the strengthening of the Internet, and the growing appreciation of the urgency to reduce demand side energy use are motivating the development of improvements in both energy efficiency and demand response (DR) systems in buildings. This paper provides a framework linking continuous energy management and continuous communications for automated demand response (Auto-DR) in various times scales. We provide a set of concepts for monitoring and controls linked to standards and procedures such as Open Automation Demand Response Communication Standards (OpenADR). Basic building energy science and control issues in this approach begin with key building components, systems, end-uses and whole building energy performance metrics. The paper presents a framework about when energy is used, levels of services by energy using systems, granularity of control, and speed of telemetry. DR, when defined as a discrete event, requires a different set of building service levels than daily operations. We provide examples of lessons from DR case studies and links to energy efficiency.

  17. Pharmacia Building Q, Skokie, Illinois

    Energy Technology Data Exchange (ETDEWEB)

    2002-12-01

    This case study was prepared as one in a series for the Laboratories for the 21st Century program, a joint endeavor of the U.S. Environmental Protection Agency and the U.S. Department of Energy's Federal Energy Management Program. The goal of this program is to foster greater energy efficiency in new and retrofit laboratory buildings in both the public and the private sectors. The energy-efficient elements of the laboratory featured in this case study-Pharmacia Corporation's new Building Q in Skokie, Illinois-include sustainable design, light-filled interior spaces for daylighting, energy-efficient fume hoods and other equipment, occupancy sensors to reduce lighting loads, and spectrally selective glazing to allow more light and less heat into the building. Water-saving fixtures are used, as well. Building Q has been certified Gold (the second highest rating) through the U.S. Green Building Council's Leadership in Energy and Environmental Design (LEED) system.

  18. Tight or sick building syndrome

    Energy Technology Data Exchange (ETDEWEB)

    Thirumalaikolundusubramanian, P; Shanmuganadan, S [Madurai Kamaraj Univ. (India). Dept. of Geography; Uma, A [Madurai Medical Coll. (India). Dept. of Medicine and Microbiology

    1991-01-01

    Modern buildings are designed with the usual heating, air-conditioning and ventilation equipment. In most of these buildings, air is continuously recirculated and, as a result, workers suffer from tight or sick building syndrome. This syndrome is discussed with reference to symptoms of air contamination, ventilation system standards and research needs. The most common symptoms of tight building syndrome are eye, nose and throat irritation, headache, fatigue, sneezing, difficulty in wearing contact lenses, chest tightness, nausea, dizziness and dermatitis. Symptoms experienced by 50 doctors and 50 paramedical personnel working in an air-conditioned intensive care unit and operating theatres of the Government Rajaji Hospital, Madurai in India were studied by means of a questionnaire survey. In the present study, respiratory and ocular symptoms were observed more in those working in operating theatres and were believed to be due to excessive use of formaldehyde used for sterilization. Various suggestions were made to prevent sick building syndrome. Moreover, the physicians treating sick individuals should be aware of the symptoms caused by indoor air pollutants as sufferers invariably require a change of environment rather than drugs. (orig.).

  19. Modeling of shear wall buildings

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, A K [North Carolina State Univ., Raleigh (USA). Dept. of Civil Engineering

    1984-05-01

    Many nuclear power plant buildings, for example, the auxiliary building, have reinforced concrete shear walls as the primary lateral load resisting system. Typically, these walls have low height to length ratio, often less than unity. Such walls exhibit marked shear lag phenomenon which would affect their bending stiffness and the overall stress distribution in the building. The deformation and the stress distribution in walls have been studied which is applicable to both the short and the tall buildings. The behavior of the wall is divided into two parts: the symmetric flange action and the antisymmetry web action. The latter has two parts: the web shear and the web bending. Appropriate stiffness equations have been derived for all the three actions. These actions can be synthesized to solve any nonlinear cross-section. Two specific problems, that of lateral and torsional loadings of a rectangular box, have been studied. It is found that in short buildings shear lag plays a very important role. Any beam type formulation which either ignores shear lag or includes it in an idealized form is likely to lead to erroneous results. On the other hand a rigidity type approach with some modifications to the standard procedures would yield nearly accurate answers.

  20. Modernising ATLAS Software Build Infrastructure

    CERN Document Server

    Ritsch, Elmar; The ATLAS collaboration

    2017-01-01

    In the last year ATLAS has radically updated its software development infrastructure hugely reducing the complexity of building releases and greatly improving build speed, flexibility and code testing. The first step in this transition was the adoption of CMake as the software build system over the older CMT. This required the development of an automated translation from the old system to the new, followed by extensive testing and improvements. This resulted in a far more standard build process that was married to the method of building ATLAS software as a series of $12$ separate projects from Subversion. We then proceeded with a migration of the code base from Subversion to Git. As the Subversion repository had been structured to manage each package more or less independently there was no simple mapping that could be used to manage the migration into Git. Instead a specialist set of scripts that captured the software changes across official software releases was developed. With some clean up of the repositor...

  1. Modernising ATLAS Software Build Infrastructure

    CERN Document Server

    Gaycken, Goetz; The ATLAS collaboration

    2017-01-01

    In the last year ATLAS has radically updated its software development infrastructure hugely reducing the complexity of building releases and greatly improving build speed, flexibility and code testing. The first step in this transition was the adoption of CMake as the software build system over the older CMT. This required the development of an automated translation from the old system to the new, followed by extensive testing and improvements. This resulted in a far more standard build process that was married to the method of building ATLAS software as a series of 12 separate projects from SVN. We then proceeded with a migration of its code base from SVN to git. As the SVN repository had been structured to manage each package more or less independently there was no simple mapping that could be used to manage the migration into git. Instead a specialist set of scripts that captured the software changes across official software releases was developed. With some clean up of the repository and the policy of onl...

  2. Building in a Market Economy

    DEFF Research Database (Denmark)

    Bonke, Sten; Levring, Peter

    This book offers a "state of the art" introduction to the "Danish way" of building. It presents a source of information and inspiration to the complex transitional process of rearranging the construction sectors in Central and Eastern European countries. The text gives a historical presentation o...... and functions of the main actors in the building process. During these passages and in a final section important future developments are highlighted, and characteristic research and development projects are presented....... of the development in the built environment since the second world war. Subsequently the different current regulative systems on state and on building industry level are revised. The more practical managerial methods are then elaborated and associated with the common organisational frameworks, indicating the roles...

  3. Extensive Renovation of Heritage Buildings

    DEFF Research Database (Denmark)

    Rasmussen, Torben Valdbjørn; Møller, Eva B.; Buch-Hansen, Thomas Cornelius

    2015-01-01

    In the debate on whether or not heritage buildings should be included in work to mitigate climate change impacts, it is important to assess the impact of these buildings. Therefore the results of an extensive energy upgrading of a listed complex was studied. Climate change and measures to mitigate...... its effects have been a global priority for more than a decade. Efforts to mitigate climate change have focused on reducing greenhouse gas emissions, especially CO2. As a consequence, there is an increased interest in reducing the energy consumption and increase the indoor climate standard of many...... feasible energy-upgrading measures for implementation including measures to provide an acceptable indoor climate. The energy savings as well as the reduction of CO2 emissions are calculated. Furthermore, it is discussed how measures can affect the durability of a heritage building, as measures may create...

  4. Capacity Building in Land Management

    DEFF Research Database (Denmark)

    Enemark, Stig; Ahene, Rexford

    2003-01-01

    There is a significant need for capacity building in the interdisciplinary area of land management especially in developing countries and countries in transition, to deal with the complex issues of building efficient land information systems and sustainable institutional infrastructures. Capacity...... building in land management is not only a question of establishing a sufficient technological level or sufficient economic resources. It is mainly a question of understanding the interdisciplinary and cross-sectoral nature of land administration systems, and understanding the need for human resource...... and professionals for implementing the new land policy. The curriculum combines the diploma and the bachelor level and it combines the key areas of land surveying, land management and physical planning....

  5. Intelligent Buildings and pervasive computing

    DEFF Research Database (Denmark)

    Grønbæk, Kaj; Kyng, Morten; Krogh, Peter Gall

    2001-01-01

    computers are everywhere, for everyone, at all times. Where IT becomes a still more integrated part of our environments with processors, sensors, and actuators connected via high-speed networks and combined with new visualiza-tion devices ranging from projections directly in the eye to large panorama......Intelligent Buildings have been the subject of research and commercial interest for more than two decades. The different perspectives range from monitoring and controlling energy consumption over interactive rooms supporting work in offices and leisure in the home, to buildings providing...... information to by-passers in plazas and urban environments. This paper puts forward the hypothesis that the coming decade will witness a dramatic increase in both quality and quantity of intelligent buildings due to the emerging field of pervasive computing: the next generation computing environments where...

  6. Building relationships for better maintenance.

    Science.gov (United States)

    Lee, Hackman Hon Yin; Scott, David

    2009-02-01

    Effective management of building maintenance is a vital ingredient in ensuring a high quality built environment for any building's occupiers. However, maintenance is not high on the list of priorities for most organisations. Communication between top management personnel looking at maintenance issues from a strategic standpoint and maintenance staff considering them at an operational level is often not as good as it should be. When planning maintenance activities maintenance personnel often draw too heavily on their technical experience and expertise without taking sufficient account of wider organisational objectives or consulting effectively with top management. Senior managers also regularly complain about lack of managerial input from maintenance departments. Such barriers contribute to communication difficulties between top management at a strategic level and maintenance personnel at an operational level. Identifying where the key differences lie in senior managers' and maintenance personnel's viewpoints on maintenance strategy can prove invaluable in achieving some convergence of opinions and optimising the efficiency of the overall building maintenance process.

  7. Small Buildings in Earthquake Areas. Educational Building Digest 2.

    Science.gov (United States)

    Mooij, D.

    This booklet is intended for builders and others who actually construct small buildings in earthquake areas and not for professionally qualified architects or engineers. In outline form with sketches the following topics are discussed: general construction and design principles; foundations; earth walls; brick, block, and stone walls; timber frame…

  8. Building a Better Campus: An Update on Building Codes.

    Science.gov (United States)

    Madden, Michael J.

    2002-01-01

    Discusses the implications for higher education institutions in terms of facility planning, design, construction, and renovation of the move from regionally-developed model-building codes to two international sets of codes. Also addresses the new performance-based design option within the codes. (EV)

  9. Performance Based Building and its application to Healthy Buildings

    NARCIS (Netherlands)

    Loomans, M.G.L.C.; Bluyssen, P.M.

    2005-01-01

    The European funded Project PeBBu, Performance Based Building, is a Thematic network under the Competitive and Sustainable Growth program, which started September 1st, 2001 andwill run for 4 years. In one of the domains of PeBBu, the domain Indoor Environment, a stateof-the-art on the Performance

  10. Synthetic building materials for transport buildings and structures

    Science.gov (United States)

    Gerasimova, Vera

    2017-10-01

    The most effective building materials account for the highest growth not only in construction of residential and public buildings, but also other capital projects including roadways, bridges, drainage, communications and other engineering projects. Advancement in the technology of more efficient and ecologically responsible insulation materials have been a priority for safety, minimal maintenance and longevity of finished construction projects. The practical use of modern building materials such as insulation, sound reduction and low energy consumption are a benefit in cost and application compared to the use of outdated heavier and labor-intensive materials. The most efficient way for maximizing insolation and sound proofing should be done during the design stages of the project according to existing codes and regulations that are required by Western Government. All methods and materials that are used need to be optimized in order to reach a high durability and low operational and maintenance cost exceeding more than 50 years of the life of the building, whether it is for public, industrial or residential use. Western construction techniques and technologies need to be applied and adapted by the Russian Federation to insure the most productive successful methods are being implemented. The issues of efficient insulation materials are outlined in this article.

  11. Sick building syndrome: in public buildings and workplaces

    National Research Council Canada - National Science Library

    Abdul-Wahab, Sabah A

    2011-01-01

    ... are health and pleasant to live in. The chapters of this book have elaborated in a clear style, yet scientifically solid, the causes, diagnostic tools, health impacts and mitigation approaches that may be applied to existing and planned buildings. I would like to congratulate the authors and the editor for this excellent effort. We at SQU are proud ...

  12. Building Mainteance Module I: Orientation to Building Maintenance. Instructor's Guide.

    Science.gov (United States)

    Eck, Francis

    This document contains teacher's materials for a seven-lesson Missouri secondary education course on building maintenance fundamentals. The document begins with an explanation of its components and how to use them. Next is a table that associates individual instructional materials in the lessons with the competencies they teach. The lessons are:…

  13. Measuring building change : a method to capture building knowledge

    NARCIS (Netherlands)

    Choukry, M.

    1993-01-01

    Buildings are subject to change of requirements during their periods of use. In the last decades it has been mostly assumed that the rate of change is increasing. Exact description of the type of change or the amount of change is not always investigated. Requirements change knowledge in currently

  14. 21 CFR 226.20 - Buildings.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Buildings. 226.20 Section 226.20 Food and Drugs... Facilities and Equipment § 226.20 Buildings. Buildings in which Type A medicated article(s) are manufactured... operation for their intended purpose. The building shall: (a) Provide adequate space for the orderly...

  15. 9 CFR 354.220 - Buildings.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Buildings. 354.220 Section 354.220... CERTIFICATION VOLUNTARY INSPECTION OF RABBITS AND EDIBLE PRODUCTS THEREOF Buildings and Plant Facilities § 354.220 Buildings. The buildings shall be of sound construction and kept in good repair, and shall be of...

  16. 49 CFR 622.301 - Buildings.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Buildings. 622.301 Section 622.301 Transportation... Buildings. (a) FTA assistance for the construction, reconstruction, or modification of buildings for which... a building, within the scope of the proposed construction activity and at a level of detail...

  17. 75 FR 20833 - Building Energy Codes

    Science.gov (United States)

    2010-04-21

    ...-0012] Building Energy Codes AGENCY: Office of Energy Efficiency and Renewable Energy, Department of... the current model building energy codes or their equivalent. DOE is interested in better understanding... codes, Standard 90.1-2007, Energy Standard for Buildings Except Low-Rise Residential Buildings (or...

  18. Smoke control in buildings: An overview

    NARCIS (Netherlands)

    Twilt, L.; Oerle, N.J. van; Leur, P.H.E. van de

    1996-01-01

    Smoke poses a major hazard to people in a building involved in fire, being directly responsible for the majority of all deaths in building fires. Whereas the fire itself generally spreads through the building at a relatively slow rate, smoke takes only minutes to fill the building, if no actions are

  19. Recent changes in the Building Topology Ontology

    DEFF Research Database (Denmark)

    Rasmussen, Mads Holten; Pauwels, Pieter; Lefrancois, Maxime

    The Building Topology Ontology (BOT) was in early 2017 suggested to the W3C community group for Linked Building Data as a simple ontology covering the core concepts of a building. Since it was first announced it has been extended to cover a building site, elements hosted by other elements, zones...

  20. Control buildings for blast resistance

    Energy Technology Data Exchange (ETDEWEB)

    Brown, G.A.

    1982-08-01

    Offers advice on interior design for blast-resistant control buildings. Suggests that for the comfort and safety of occupants, special attention must be paid to internal finishes and color schemes. Considers external treatment (e.g. panels, cladding fixings, thermal insulation), air intakes and exhausts, internal finishes (e.g. stud lining method), and internal walls and partitions. Presents diagrams showing construction method for a control building; elimination of ''cold bridge'' at eaves level; staggering door openings to minimize blast effects; and flexure of concrete walls without affecting the inner lining.

  1. Moisture dynamics in building envelopes

    Energy Technology Data Exchange (ETDEWEB)

    Peuhkuri, R.

    2003-07-01

    The overall scope of this Thesis 'Moisture dynamics in building envelopes' has been to characterise how the various porous insulation materials investigated performed hygro thermally under conditions similar to those in a typical building envelope. As a result of the changing temperature and moisture conditions in the exterior weather and indoor climate the materials dynamically absorb and release moisture. The complexity of the impact of these conditions on the resulting moisture transport and content of the materials has been studied in this Thesis with controlled laboratory tests. (au)

  2. BOA: Framework for Automated Builds

    CERN Document Server

    Ratnikova, N

    2003-01-01

    Managing large-scale software products is a complex software engineering task. The automation of the software development, release and distribution process is most beneficial in the large collaborations, where the big number of developers, multiple platforms and distributed environment are typical factors. This paper describes Build and Output Analyzer framework and its components that have been developed in CMS to facilitate software maintenance and improve software quality. The system allows to generate, control and analyze various types of automated software builds and tests, such as regular rebuilds of the development code, software integration for releases and installation of the existing versions.

  3. Moisture Dynamics in Building Envelopes

    DEFF Research Database (Denmark)

    Peuhkuri, Ruut Hannele

    2003-01-01

    The overall scope of this Thesis "Moisture dynamics in building envelopes" has been to characterise how the various porous insulation materials investigated performed hygrothermally under conditions similar to those in a typical building envelope. As a result of the changing temperature...... part of the Thesis consists of a theory and literature review on the moisture storage and transport processes (Chapter 2), on the non-Fickian moisture transport (Chapter 3)and on the methods for determining the moisture properties (Chapter 4). In the second part, the conducted experimental work...

  4. BOA: Framework for automated builds

    International Nuclear Information System (INIS)

    Ratnikova, N.

    2003-01-01

    Managing large-scale software products is a complex software engineering task. The automation of the software development, release and distribution process is most beneficial in the large collaborations, where the big number of developers, multiple platforms and distributed environment are typical factors. This paper describes Build and Output Analyzer framework and its components that have been developed in CMS to facilitate software maintenance and improve software quality. The system allows to generate, control and analyze various types of automated software builds and tests, such as regular rebuilds of the development code, software integration for releases and installation of the existing versions

  5. Building constructions: architecture and nature

    Directory of Open Access Journals (Sweden)

    Mayatskaya Irina

    2017-01-01

    Full Text Available The problem of optimization of building structures is considered in architectural bionic modeling on the bionic principle basis. It is possible to get a reliable and durable constructions by studying the structure and the laws of organization of natural objects. Modern architects have created unique buildings using the bionic approach. There are such properties as symmetry, asymmetry, self-similarity and fractality used in the modern architecture. Using the methods of fractal geometry in the design of architectural forms allows finding a variety of constructive solutions.

  6. Towards Building Cloud Education Networks

    Directory of Open Access Journals (Sweden)

    Stanka Hadzhikoleva

    2018-02-01

    Full Text Available The article outlines the trends and prospects in higher education happening as a result of internationalization, as well as the possible risks and challenges. The training capabilities of cloud computing are examined. A review has been done of specific cloud services suitable for organizing and conducting educational and administrative activities. Some trends have been outlined, such as the probable consequences of building institutional education clouds and the opportunities for interoperability between them. The opportunities for building cloud education networks and their main characteristics are explored.

  7. Radio Propagation into Modern Buildings

    DEFF Research Database (Denmark)

    Rodriguez Larrad, Ignacio; Nguyen, Huan Cong; Jørgensen, Niels T.K.

    2014-01-01

    Energy-efficient buildings are gaining momentum in order to comply with the new energy regulations. Especially in northern cold countries, thick reinforced walls and energy-efficient windows composed of several layers of glass plus metal coating are becoming the de facto elements in modern building...... constructions. These materials are used in favor of achieving a proper level of thermal isolation, but it has been noticed that they can impact heavily on radio signal propagation. This paper presents a measurement-based analysis of the outdoor-to-indoor attenuation experienced in several modern constructions...

  8. Building Blocks of the Universe

    CERN Document Server

    The ATLAS collaboration

    2015-01-01

    This article presents possibilities to impart knowledge of and enthusiasm for particle physics to essentially all non-expert target audiences by the use of LEGO bricks and models of particle physics experiments built from these. Methods of using LEGO models, both as a passive exhibit and as part of interactive outreach events, are presented, along with a historical review of the “Build Your Own Particle Detector” programme and the corresponding idea of hosting competitions in building detector models in LEGO pieces as a perfect setting to grasp people’s attention, get them involved and ultimately convey knowledge in particle physics to them.

  9. INTEGRATING HEALTH INTO BUILDINGS OF THE FUTURE.

    Science.gov (United States)

    Heidari, Leila; Younger, Margalit; Chandler, George; Gooch, James; Schramm, Paul

    2016-01-01

    The health and wellbeing of building occupants should be a key priority in the design, building, and operation of new and existing buildings. Buildings can be designed, renovated, and constructed to promote healthy environments and behaviors and mitigate adverse health outcomes. This paper highlights health in terms of the relationship between occupants and buildings, as well as the relationship of buildings to the community. In the context of larger systems, smart buildings and green infrastructure strategies serve to support public health goals. At the level of the individual building, interventions that promote health can also enhance indoor environmental quality and provide opportunities for physical activity. Navigating the various programs that use metrics to measure a building's health impacts reveals that there are multiple co-benefits of a "healthy building," including those related to the economy, environment, society, transportation, planning, and energy efficiency.

  10. Photovoltaics for Buildings Cutting-Edge PV

    International Nuclear Information System (INIS)

    Hayter, S. J.; Martin, R. L.

    1998-01-01

    Photovoltaic (PV) technology development for building-integrated applications (commonly called PV for Buildings) is one of the fastest growing areas in the PV industry. Buildings represent a huge potential market for photovoltaics because they consume approximately two-thirds of the electricity consumed in the US. The PV and buildings industries are beginning to work together to address issues including building codes and standards, integration, after-market servicing, education, and building energy efficiency. One of the most notable programs to encourage development of new PV-for-buildings products is the PV:BONUS program, supported by the US Department of Energy. Demand for these products from building designers has escalated since the program was initiated in 1993. This paper presents a range of PV-for-buildings issues and products that are currently influencing today's PV and buildings markets

  11. Analysis of the Portuguese building regulation system

    OpenAIRE

    Costa Branco De Oliveira Pedro, J.A.; Meijer, F.M.; Visscher, H.J.

    2008-01-01

    The Portuguese building regulation system has undergone significant changes in the last 20 years. Almost all building regulations presently in force were approved during that period. Some of those building regulations resulted from the transposition of European Directives. Other building regulations were changed due to improvements in the scientific knowledge. The changes in the building control system were mainly driven by an adaptation to more pressing circumstances of practice. The lack...

  12. Current perception of wooden building in Slovenia

    OpenAIRE

    Kitek Kuzman , Manja; Hrovatin, Jasna

    2007-01-01

    In residential buildings, prefabricated wooden houses constitute minor part ofall buildings in Slovenia. The reasons pertaining to the relatively low occurrence of prefabricated wooden buildings today are assessed in the presentstudy. The Slovenian public opinion survey on wooden building 2006 examined, among other issues, public attitude towards wooden buildings and itsadvantages. Data collection was performed by CATI method. Results of publicresearch clearly indicate the users' lack of know...

  13. Studies on the production of building material grade slag from hazardous-waste incineration plants; Untersuchungen zur Herstellung einer Schlacke mit Baustoffqualitaet aus Sondermuellverbrennungsanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Reich, J.; Herbel, J.D.; Pasel, C. [Duisburg Univ. (Gesamthochschule) (Germany). Fachgebiet Abfalltechnik

    1998-09-01

    In an attempt to restore the competitive power of hazardous-waste incineration within the present legal framework, plant operators have in some cases lowered disposal prices below the break-even point; in this respect there is no further room for improvement. One approach towards a new marketable solution could be to use rotary kilns not only for disposal but also as production plants. This could be achieved by means of input control and loading materials. If, for example, the slag remaining after combustion could be made to meet building material specifications, thus providing a marketable product, then rotary kilns would be able to serve as production plants for a secondary raw material. If it should prove possible in the course of manufacturing campaigns to develop slags from hazardous-waste incineration plants to a marketable product, then operators will thus have complied to the demand of the Law on Recycling and Waste Management for waste avoidance and that of the Emission Control Law for residue recycling. Targeted use of suitable loading materials for quality improvement could enable operators of hazardous-waste incineration plants to secure a new strategic position on the market as building material manufacturers and utilise existing plant capacities. [Deutsch] Um die Sonderabfallverbrennung im Rahmen der rechtlichen Vorgaben wieder konkurrenzfaehig zu machen, haben die Anlagenbetreiber die Entsorgungspreise teilweise unter die Grenze der Kostendeckung zurueckgenommen; hier besteht kein Spielraum mehr. Ein neuer, marktgerechter Ansatz koennte sich dann ergeben, wenn die Drehrohroefen statt als Beseitigungsaggregate durch Inputsteuerung und Zuschlaege eventuell auch als Produktionsanlagen einzusetzen waeren. Wenn z.B. die Schlacke, als Rueckstand aus der Verbrennung, als ein im Baustoffmarkt absetzbares Produkt nach Qualitaetskriterien gezielt hergestellt wuerde, koennte der Drehrohrofen als Produktionsanlage fuer einen Sekundaerrohstoff betrieben werden

  14. Critical Community Building: Beyond Belonging

    Science.gov (United States)

    Bettez, Silvia Cristina

    2011-01-01

    In this paper, the author talks about community building and the power of active listening. Active listening is a particular kind of listening that requires conscious effort; it is a type of listening that some rarely practice and sometimes is virtually absent from classroom interactions. Thus active listening itself may be deceptively simple…

  15. Building brands without mass media.

    Science.gov (United States)

    Joachimsthaler, E; Aaker, D A

    1997-01-01

    Costs, market fragmentation, and new media channels that let customers bypass advertisements seem to be in league against the old ways of marketing. Relying on mass media campaigns to build strong brands may be a thing of the past. Several companies in Europe, making a virtue of necessity, have come up with alternative brand-building approaches and are blazing a trail in the post-mass-media age. In England, Nestlé's Buitoni brand grew through programs that taught the English how to cook Italian food. The Body Shop garnered loyalty with its support of environmental and social causes. Cadbury funded a theme park tied to its history in the chocolate business. Häagen-Dazs opened posh ice-cream parlors and got itself featured by name on the menus of fine restaurants. Hugo Boss and Swatch backed athletic or cultural events that became associated with their brands. The various campaigns shared characteristics that could serve as guidelines for any company hoping to build a successful brand: senior managers were closely involved with brand-building efforts; the companies recognized the importance of clarifying their core brand identity; and they made sure that all their efforts to gain visibility were tied to that core identity. Studying the methods of companies outside one's own industry and country can be instructive for managers. Pilot testing and the use of a single and continuous measure of brand equity also help managers get the most out of novel approaches in their ever more competitive world.

  16. Green buildings: Implications for acousticians

    Science.gov (United States)

    Noble, Michael R.

    2005-04-01

    This presentation will deal with the practical implications of green design protocols of the US Green Building Council on interior acoustics of buildings. Three areas of particular consequence to acousticians will be discussed. Ventilation Systems: reduced energy consumption goals dictate reliance on natural cooling and ventilation using ambient air when possible. The consequent large openings in the building envelope to bring fresh air into rooms, and similar sized openings to transfer the mixed air out, can severely compromise the noise isolation of the rooms concerned. Radiant Cooling: the heavy concrete floors of buildings can be used as a thermal flywheel to lessen the cooling load, which forces the concrete ceilings to be exposed to the occupied rooms for heat transfer, and strictly limits the application of acoustical absorption on the ceilings. This challenges the room acoustics design. Green Materials: the LEED protocols require the elimination of potentially harmful finishes, including fibrous materials which may impact air quality or contribute to health problems. Since the backbone of sound absorption is glass and mineral fibres, this further challenges provision of superior room acoustics. Examples and commentary will be provided based on current and recent projects.

  17. Teaching Building Science with Simulations

    Science.gov (United States)

    Hatherly, Amanda

    2017-01-01

    Teaching building science to community college students can be challenging given both the macro (houses change subject to varying seasons) and the micro (heat transfer, moisture movement) level of the topics taught. Simulations and games can provide a way of learning material that can otherwise be difficult for students to understand. In this…

  18. International building code for bamboo

    NARCIS (Netherlands)

    Janssen, J.J.A.; Kumar, Arun; Ramanuja Rao, I.V.; Sastry, Cherla

    2002-01-01

    One of the recommendations in the International Bamboo Congress and Workshop, held at Bali in 1995, requested the International Network for Bamboo and Rattan (INBAR), "to organize a task force to discuss and finalize a building code for bamboo". Consequently a draft was prepared under the title, "An

  19. Building server capabilities in China

    DEFF Research Database (Denmark)

    Adeyemi, Oluseyi; Slepniov, Dmitrij; Wæhrens, Brian Vejrum

    2012-01-01

    The purpose of this paper is to further our understanding of multinational companies building server capabilities in China. The paper is based on the cases of two western companies with operations in China. The findings highlight a number of common patterns in the 1) managerial challenges related...

  20. Resilient mounting systems in buildings

    NARCIS (Netherlands)

    Breeuwer, R.; Tukker, J.C.

    1976-01-01

    The basic elements of resilient mounting systems are described and various measures for quantifying the effect of such systems defined. Using electrical analogue circuits, the calculation of these measures is illustrated. With special reference to resilient mounting systems in buildings, under

  1. Building consensus in the community

    International Nuclear Information System (INIS)

    Bishop, J.

    1994-01-01

    The importance for the development of UK renewable energy projects of building consensus in the community is discussed. After outlining the benefits of such an approach, some of the likely concerns and questions from a developer's viewpoint are explored. The key principles of good practice are considered and an example from a wind project examined. (UK)

  2. It's Not Easy Building Green.

    Science.gov (United States)

    Higgins, Joseph

    2003-01-01

    Discusses green buildings, facilities designed, constructed, and operated in an environmentally friendly and resource-efficient way. Discusses reasons for campuses to "go green," the "shades of green" or variations in environmental-friendliness, certification through the Leadership in Energy and Environmental Design (LEED) rating system, financial…

  3. Durability of building joint sealants

    Science.gov (United States)

    Christopher C. White; Kar Tean Tan; Donald L. Hunston; R. Sam Williams

    2009-01-01

    Predicting the service life of building joint sealants exposed to service environments in less than real time has been a need of the sealant community for many decades. Despite extensive research efforts to design laboratory accelerated tests to duplicate the failure modes occurring in field exposures, little success has been achieved using conventional durability...

  4. Building Curriculum during Block Play

    Science.gov (United States)

    Andrews, Nicole

    2015-01-01

    Blocks are not just for play! In this article, Nicole Andrews describes observing the interactions of three young boys enthusiastically engaged in the kindergarten block center of their classroom, using blocks in a building project that displayed their ability to use critical thinking skills, physics exploration, and the development of language…

  5. Building with Earthquakes in Mind

    Science.gov (United States)

    Mangieri, Nicholas

    2016-04-01

    Earthquakes are some of the most elusive and destructive disasters humans interact with on this planet. Engineering structures to withstand earthquake shaking is critical to ensure minimal loss of life and property. However, the majority of buildings today in non-traditional earthquake prone areas are not built to withstand this devastating force. Understanding basic earthquake engineering principles and the effect of limited resources helps students grasp the challenge that lies ahead. The solution can be found in retrofitting existing buildings with proper reinforcements and designs to deal with this deadly disaster. The students were challenged in this project to construct a basic structure, using limited resources, that could withstand a simulated tremor through the use of an earthquake shake table. Groups of students had to work together to creatively manage their resources and ideas to design the most feasible and realistic type of building. This activity provided a wealth of opportunities for the students to learn more about a type of disaster they do not experience in this part of the country. Due to the fact that most buildings in New York City were not designed to withstand earthquake shaking, the students were able to gain an appreciation for how difficult it would be to prepare every structure in the city for this type of event.

  6. Research projects and capacity building

    CSIR Research Space (South Africa)

    Breen, CM

    2004-10-01

    Full Text Available A World Bank long-term perspective study on Sub-Saharan Africa highlighted the need to build human and institutional capacity in virtually all sectors and countries. In South Africa, establishment of a democratic government in 1994 saw increased...

  7. Automation in building and construction

    NARCIS (Netherlands)

    Gassel, van F.J.M.

    2010-01-01

    De komende 30 jaar zal naar verwachting de werkkracht in Nederland van 11 miljoen naar 10 miljoen mensen afnemen (van Bronswijk, 2010). Willen we dezelfde hoeveelheid taken blijven uitvoeren dan zuIlen we extra hulpmiddelen moeten inzetten. Automation in Building and Construction is het

  8. Acoustic building infiltration measurement system

    Science.gov (United States)

    Muehleisen, Ralph T.; Raman, Ganesh

    2018-04-10

    Systems and methods of detecting and identifying a leak from a container or building. Acoustic pressure and velocity are measured. Acoustic properties are acquired from the measured values. The acoustic properties are converted to infiltration/leakage information. Nearfield Acoustic Holography (NAH) may be one method to detect the leakages from a container by locating the noise sources.

  9. Building a Culinary Arts Academy

    Science.gov (United States)

    Brown, Robert L.

    2005-01-01

    When Judy Karen Brown (the 2004 Alabama Family and Consumer Sciences Teacher of the Year) arrived at Bob Jones High School (BJHS) in Madison, Alabama, in the summer of 1999, she immediately identified a need to build both student and community interests in family and consumer sciences (FACS). She noticed the student and faculty interest in the…

  10. Biocide Runoff from Building Facades

    DEFF Research Database (Denmark)

    Bollmann, Ulla E.; Fernández-Calviño, David; Brandt, Kristian K.

    2017-01-01

    Biocides are common additives in building materials. In-can and film preservatives in polymer-resin render and paint, as well as wood preservatives are used to protect facade materials from microbial spoilage. Biocides leach from the facade material with driving rain, leading to highly polluted...

  11. Dampness in buildings and health

    DEFF Research Database (Denmark)

    Bornehag, Carl-Gustaf; Blomquist, G.; Gyntelberg, F.

    2001-01-01

    Several epidemiological investigations concerning indoor environments have indicated that "dampness" in buildings is associated to health effects such as respiratory symptoms, asthma and allergy The aim of the present interdisciplinary review is to evaluate this association as shown in the epidem...

  12. The building is the program

    CSIR Research Space (South Africa)

    Smith, Andrew C

    2013-09-01

    Full Text Available -1 Peripheral Interaction: Embedding HQ in Everyday Life. Proceedings of the Interact 2013 - 14th IFIP TC13 Conference on Human-Computer Interaction, Cape Town, South Africa, 2-6 September 2013 The building is the program Andrew Cyrus Smith1, 2...

  13. Building Community through Arts Experiences.

    Science.gov (United States)

    Arnold, Alice

    1994-01-01

    Asserts that society is fragmented and there is a need for strong support networks. Describes a cooperative community building program in North Carolina involving East Carolina University's art education program, Greenville (NC) public schools, and the McDonalds corporation. (CFR)

  14. Environmentally-sound building technologies

    NARCIS (Netherlands)

    Schmid, P.

    1998-01-01

    Referring to numbers of international scientific reports it arises that Sustainable Building Constructions are the only acceptable possibilities yet. The Sustainability of a construction deals with responsible choices of materials and energies as well as similar choices of production and execution.

  15. Can Youth Sport Build Character?

    Science.gov (United States)

    Shields, David Light; Bredemeier, Brenda Light; Power, F. Clark

    2001-01-01

    Participation and competition in some sports are associated with lower stages of moral reasoning. Coaches can foster moral development by starting with the right mental model, holding benchmark meetings about team values, setting goals for physical and character skills, making time for guided discussion sessions, building community, modeling…

  16. Structural rehabilitation of old buildings

    CERN Document Server

    Guedes, João; Varum, Humberto

    2014-01-01

    The present book describes the different construction systems and structural materials and solutions within the main old buildings typologies, and it analyses the particularities of each of them, including mechanical properties, structural behaviour, typical damage patterns and collapse mechanisms. Common or pioneering intervention measures to repair and/or strengthen some of these structural elements are also reviewed.

  17. Diagnosing in building main pipelines

    Energy Technology Data Exchange (ETDEWEB)

    Telegin, L.G.; Gorelov, A.S.; Kurepin, B.N.; Orekhov, V.I.; Vasil' yev, G.G.; Yakovlev, Ye. I.

    1984-01-01

    General principles are examined for technical diagnosis in building main pipelines. A technique is presented for diagnosis during construction, as well as diagnosis of the technical state of the pipeline-construction machines and mechanisms. The survey materials could be used to set up construction of main pipelines.

  18. Collapse simulation of building constructions

    Directory of Open Access Journals (Sweden)

    Nekrest'yanov Viktor Nikolaevich

    Full Text Available The physical reasons for building structures destruction are both the forces arising at stress-strain state of construction elements and external influences arising at emergency situations, as well as their moments, impulses and periodic impulses with the frequencies close to of fluctuations frequencies of construction elements. We shall call the mathematical calculation models for the parameters-reasons of destructions the basic models. The basic models of destruction of building structures elements allow not only providing necessary level of reliability and survivability of the elements and the construction as a whole already at the stage of their design, but also giving the chance, at their corresponding completion, to provide rational decisions on the general need of recovery works and their volume depending on destruction level. Especially important for rational design decisions development, which ensure the demanded constructional safety of building structures, is library creation of the basic mathematical models of standard processes of bearing elements destructions for standard construction designs for the purpose of the further forecast (assessment of the level and probabilities of standard destructions. Some basic mathematical models of destructions processes of the standard elements of building structures are presented in the present article. A model of accounting for construction defects and a model of obtaining requirements to probabilities of partial destructions of a construction are given. Both of these models are probabilistic.

  19. How to build a Caredroid

    NARCIS (Netherlands)

    Hoorn, J.F.

    2013-01-01

    There is a world to be gained with the establishment of a new industrial sector for robotic assistance in the care domain. How to Build a Caredroid is a signpost to its opportunities. Caredroids are humanoid systems that assist patients and caregivers in their duties and needs, simulating emotions,

  20. Building Maintenance. Student Learning Guide.

    Science.gov (United States)

    Palm Beach County Board of Public Instruction, West Palm Beach, FL.

    This student learning guide contains one module for completing a course in building maintenance. It is designed especially for use in secondary schools in Palm Beach County, Florida. The module covers one task, and consists of a purpose, performance objective, enabling objectives, learning activities keyed to resources, information sheets, student…

  1. Urban heritage, building maintenance : Foundations

    NARCIS (Netherlands)

    Verhoef, L.G.W.

    1999-01-01

    What do we understand by the term 'foundations'? This general idea may embody the literal ' groundwork' that provides support for a building and may possibly include the entire structural works that serve to pre vent subsidence. Remarkably, in this definition the word 'groundwork' incorporates both

  2. Building Maintenance, Management, and Budgeting.

    Science.gov (United States)

    Pawsey, M. R.

    1982-01-01

    Australian methods and formulas for funding building maintenance and management are outlined and found to be haphazard. Discussed are: ultimate costs of deferred maintenance, major plant replacements, life cycle costing, types of maintenance programs (including full preventive maintenance), use of computer programs for planning, and organization…

  3. Computational Design for Sport Building

    NARCIS (Netherlands)

    Turrin, M.; Yang, D.; D'Aquilio, A.; Šileryte, R.; Sun, Y

    2016-01-01

    The design of sport buildings has great impact on top-sport as well as on recreational sport-activities. It implies challenging tasks in meeting the performance-requirements. This includes the control of factors like daylight/lighting, air flow, thermal conditions, just to name a few. Such factors

  4. Daylight as a building material

    DEFF Research Database (Denmark)

    Thule Kristensen, Peter; Madsen, Merete

    2005-01-01

    The article draws on examples to chronologically trace the use of daylight as building material in architecture of the 20th and early 21st century. The essay covers works of Mies van der Rohe, Le Corbusier, Erik Bryggman, Rudolf Schwarz, Alvar Aalto, Aldo Rossi, Jørn Utzon, Daniel Libeskind, Peter...

  5. Software Build and Delivery Systems

    Energy Technology Data Exchange (ETDEWEB)

    Robey, Robert W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-07-10

    This presentation deals with the hierarchy of software build and delivery systems. One of the goals is to maximize the success rate of new users and developers when first trying your software. First impressions are important. Early successes are important. This also reduces critical documentation costs. This is a presentation focused on computer science and goes into detail about code documentation.

  6. Building an Authentic Leadership Image

    Science.gov (United States)

    Criswell, Corey; Campbell, David

    2008-01-01

    Your image can be either an asset or a liability for you as a leader. Image building is neither superficial nor unimportant. It's not about creating a false image, but recognizing genuine aspects of yourself that should be coming across to other people--but aren't. Crafting your image requires you to gain a clear picture of the image people are…

  7. Design and development of Building energy simulation Software for prefabricated cabin type of industrial building (PCES)

    Science.gov (United States)

    Zhang, Jun; Li, Ri Yi

    2018-06-01

    Building energy simulation is an important supporting tool for green building design and building energy consumption assessment, At present, Building energy simulation software can't meet the needs of energy consumption analysis and cabinet level micro environment control design of prefabricated building. thermal physical model of prefabricated building is proposed in this paper, based on the physical model, the energy consumption calculation software of prefabricated cabin building(PCES) is developed. we can achieve building parameter setting, energy consumption simulation and building thermal process and energy consumption analysis by PCES.

  8. Comparison of Building Energy Modeling Programs: Building Loads

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Dandan [Tsinghua Univ., Beijing (China); Hong, Tianzhen [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Yan, Da [Tsinghua Univ., Beijing (China); Wang, Chuang [Tsinghua Univ., Beijing (China)

    2012-06-01

    This technical report presented the methodologies, processes, and results of comparing three Building Energy Modeling Programs (BEMPs) for load calculations: EnergyPlus, DeST and DOE-2.1E. This joint effort, between Lawrence Berkeley National Laboratory, USA and Tsinghua University, China, was part of research projects under the US-China Clean Energy Research Center on Building Energy Efficiency (CERC-BEE). Energy Foundation, an industrial partner of CERC-BEE, was the co-sponsor of this study work. It is widely known that large discrepancies in simulation results can exist between different BEMPs. The result is a lack of confidence in building simulation amongst many users and stakeholders. In the fields of building energy code development and energy labeling programs where building simulation plays a key role, there are also confusing and misleading claims that some BEMPs are better than others. In order to address these problems, it is essential to identify and understand differences between widely-used BEMPs, and the impact of these differences on load simulation results, by detailed comparisons of these BEMPs from source code to results. The primary goal of this work was to research methods and processes that would allow a thorough scientific comparison of the BEMPs. The secondary goal was to provide a list of strengths and weaknesses for each BEMP, based on in-depth understandings of their modeling capabilities, mathematical algorithms, advantages and limitations. This is to guide the use of BEMPs in the design and retrofit of buildings, especially to support China’s building energy standard development and energy labeling program. The research findings could also serve as a good reference to improve the modeling capabilities and applications of the three BEMPs. The methodologies, processes, and analyses employed in the comparison work could also be used to compare other programs. The load calculation method of each program was analyzed and compared to

  9. Building Energy Management Open Source Software

    Energy Technology Data Exchange (ETDEWEB)

    Rahman, Saifur [Virginia Polytechnic Inst. and State Univ. (Virginia Tech), Blacksburg, VA (United States)

    2017-08-25

    Funded by the U.S. Department of Energy in November 2013, a Building Energy Management Open Source Software (BEMOSS) platform was engineered to improve sensing and control of equipment in small- and medium-sized commercial buildings. According to the Energy Information Administration (EIA), small- (5,000 square feet or smaller) and medium-sized (between 5,001 to 50,000 square feet) commercial buildings constitute about 95% of all commercial buildings in the U.S. These buildings typically do not have Building Automation Systems (BAS) to monitor and control building operation. While commercial BAS solutions exist, including those from Siemens, Honeywell, Johnsons Controls and many more, they are not cost effective in the context of small- and medium-sized commercial buildings, and typically work with specific controller products from the same company. BEMOSS targets small and medium-sized commercial buildings to address this gap.

  10. Team Building e a enfermagem Team Building e enfermería Team Building and nursing

    Directory of Open Access Journals (Sweden)

    Filipa Homem

    2012-07-01

    Full Text Available Num ambiente de insatisfação crescente e de imprevisibilidade como é o da enfermagem, cada vez mais é fundamental motivar as equipas, conferindo-lhes competências pessoais, relacionais, comunicacionais e, acima de tudo, fomentar o trabalho em equipa e consequentemente a produtividade. O Team Building, surge assim como uma estratégia eficaz para obter resultados positivos. Por ser uma estratégia ainda pouco utilizada em Portugal, decidimos realizar este artigo teórico sobre o assunto e refletir sobre a sua pertinência e potencialidades nas equipas de enfermagem, tendo definido como objetivos: aprofundar conhecimentos sobre Team Building, contextualizar o Team Building no âmbito das teorias organizacionais, descrever diferentes modelos de Team Building e refletir sobre a utilidade do Team Building na qualidade da prestação de cuidados de enfermagem. Deste modo, foram pesquisados artigos na plataforma eletrónica de bases de dados EBSCO, assim como consultada literatura relacionada com a psicologia organizacional. Com a presente pesquisa conclui-se que esta estratégia de dinamização de equipas é útil no âmbito da enfermagem, podendo melhorar a comunicação e relações interpessoais, identificar pontos fortes e fracos das equipas, proporcionar maior satisfação no trabalho e, deste modo, aumentar a qualidade dos cuidados de saúde prestados.En un ambiente de creciente descontento y de imprevisibilidad como el de la enfermería, es cada vez más primordial motivar a los equipos, dándoles competencias personales, relacionales, y, sobre todo, fomentar el trabajo en equipo y consecuentemente la productividad. El Team Building surge así como una estrategia eficaz para lograr resultados positivos. Al ser una estrategia aún poco utilizada en Portugal, se decidió realizar este artículo teórico sobre el asunto y reflexionar sobre la pertinencia y el potencial de los equipos de enfermería, para lo que se definieron los objetivos

  11. The role of F-18 FDG-PET for 3-D radiation treatment planning of non-small cell lung cancer - first results of a prospective study; Einsatz der F-18-FDG-PET in der 3-D-Bestrahlungsplanung des nichtkleinzelligen Bronchialkarzinoms: erste Ergebnisse einer prospektiven Studie

    Energy Technology Data Exchange (ETDEWEB)

    Schmuecking, M.; Baum, R.P.; Przetak, C.; Niesen, A. [Zentralklinik Bad Berka (Germany). Klinik fuer Nuklearmedizin/PET-Zentrum; Lopatta, E.C.; Wendt, T.G. [Jena Univ. (Germany). Klinik fuer Radiologie, Abt. Strahlentherapie; Plichta, K.; Leonhardi, J. [Zentralklinik Bad Berka (Germany). Inst. fuer Bildgebende Diagnostik

    2001-04-01

    Spiral-CT- und eine F-18-FDG-PET-Untersuchung innerhalb von 10 Tagen. Die PET-Daten wurden iterativ rekonstruiert, anschliessend erfolgte die Bildfusion mit den CT-Daten. Zunaechst wurden Zielvolumina und die Volumina der Risikoorgane (Lunge, Herz, Rueckenmark) basierend auf CT-Daten generiert. Anschliessend wurden erneut die Zielvolumina, basierend auf den PET-Daten errechnet. Fuer jedes Zielvolumen wurden Bestrahlungsplaene erstellt und Dosis-Volumen-Histogramme (DVH) berechnet. Durch die Integration der metabolischen PET-Zusatzinformation in die 3-D-Bestrahlungsplanung, konnten kleinere Zielvolumina bei 25 von 27 Patienten generiert werden (im Mittel um 12%, Spannbreite von 3% bis 21%). Die auf PET-Daten basierenden DVH zeigten eine Dosisreduktion an den Risikoorganen, V{sub Lunge} (20 Gy) konnte im Mittel um 10% (Spannbreite 5% bis 17%) reduziert werden. Bei 2 Patienten war das auf der PET basierende Zielvolumen groesser, als das auf der CT basierende Volumen, da im PET Lymphknotenmetastasen detektiert wurden, die im CT morphologisch unauffaellig erschienen (Groesse<10 mm). Die F-18-FDG-PET liefert nuetzliche Zusatzinformationen zu den morphologisch-anatomisch orientierten bildgeben Verfahren und ermoeglicht eine exaktere Lokalisation von Lymphknotenmetastasen und eine genauere Bestimmung der Primaertumorausdehnung. Bedingt durch kleinere Zielvolumina, konnte bei 93% der Patienten die Strahlentherapie mit kleineren, toxizitaetsaermeren Volumina durchgefuehrt werden. Andererseits ist eine komplette Tumorerfassung mit hoeherer Genauigkeit moeglich, sodass wahrscheinlich eine bessere Tumorkontrolle resultiert. Durch den Einsatz der FDG-PET in der 3-D-Bestrahlungsplanung koennte moeglicherweise die therapeutische Breite der Radiotherapie erhoeht werden. Um dies zu sichern, sind weitere Untersuchungen notwendig. (orig.)

  12. Experimental data for insulin-like growth factor-1 (IGF-1) and basic fibroblast growth factor (bFGF) in prevention of radiation myelopathy; Experimentelle Daten zum Einsatz von Insulin-Like Growth Factor-1 (IGF-1) und Basic Fibroblast Growth Factor (bFGF) zur Praevention einer Strahlenmyelopathie

    Energy Technology Data Exchange (ETDEWEB)

    Nieder, C. [Technische Univ. Muenchen (Germany). Klinik und Poliklinik fuer Strahlentherapie und Radiologische Onkologie; Price, R.E.; Rivera, B. [The Univ. of Texas, M. D. Anderson Cancer Center, Houston, TX (United States). Dept. of Veterinary Medicine and Surgery; Andratschke, N.; Kian Ang, K. [The Univ. of Texas, M. D. Anderson Cancer Center, Houston, TX (United States). Dept. of Experimental Radiation Oncology

    2002-03-01

    Background: Current models of radiation myelopathy provide a rationale for growth factor-based prevention strategies. Thus, we tested whether insulin-like growth factor-1 (IGF-1) and basic fibroblast growth factor (bFGF) alone or in combination modulate radiation tolerance of the rat cervical spinal cord. Materials and Methods: The cervical spinal cord of 68 adult Fisher F344 rats received a total dose of 30-36 Gy, given as a single fraction of 16 Gy followed by a second radiation dose of 14-20 Gy. Continuous intrathecal infusion of bFGF (44 rats) or saline (24 rats) into the cisterna magna was given concomitantly. A further experiment included 14 additional rats which were treated with subcutaneous injection of IGF-1 parallel to irradiation with a total dose of 34 Gy or 36 Gy. 20 rats received combined treatment, i.e. intrathecal infusion of bFGF plus subcutaneous injection of IGF-1, starting 24 hours before irradiation (total dose 33 Gy or 36 Gy) for a total of 4 days. Animals were followed until myelopathy developed or for a maximum of 12 months. Histopathologic examinations were performed post mortem. Results: Treatment with bFGF alone or IGF-1 alone increased the median time to myelopathy significantly. In the 36-Gy group, after combination treatment a comparable prolongation of latency was seen. Moreover, rats treated with 33 Gy and combined bFGF plus IGF-1 showed a significantly reduced risk of myelopathy, too (p = 0.0015). (orig.) [German] Hintergrund: Aktuelle Modelle zur Pathogenese der Strahlenmyelopathie lassen den praeventiven Einsatz von Wachstumsfaktoren sinnvoll erscheinen. Daher sollte ueberprueft werden, ob Insulin-Like Growth Factor-1 (IGF-1) und Basic Fibroblast Growth Factor (bFGF) als Einzelsubstanzen oder in Kombination die Strahlentoleranz des zervikalen Rueckenmarks von Ratten beeinflussen. Material und Methoden: Das Zervikalmark von 68 erwachsenen Fisher-F344-Ratten wurde mit zwei Einzelfraktionen bis insgesamt 30-36 Gy bestrahlt (16 Gy

  13. Local lysis with Alteplase for the treatment of acute embolic leg ischemia following the use of the Duett {sup trademark} closure device: preliminary results; Lokale Alteplase-Lyse zur Therapie der akuten embolischen Beinischaemie nach Einsatz des Duett {sup trademark} -Verschluss-Systems: vorlaeufige Ergebnisse

    Energy Technology Data Exchange (ETDEWEB)

    Schuermann, K.; Buecker, A.; Wingen, M.; Tacke, J.; Wein, B.; Guenther, R.W. [Klinik fuer Radiologische Diagnostik des Universitaetsklinikums der RWTH Aachen (Germany); Janssens, U. [Medizinische Klinik I (Kardiologie) des Universitaetsklinikums der RWTH Aachen (Germany)

    2004-04-01

    Purpose: To analyze retrospectively the result of the alteplase lysis therapy of embolic complications following the use of the Duett closure device. Methods and Materials: For 3.5 years, the Duett closure device was used in 1,398 angiographies to close the femoral puncture site. The Duett device consists of a balloon and a liquid procoagulant containing collagen and thrombin, which is injected into the puncture tract under endovascular balloon protection of the arterial puncture site. In 9 patients (0.64%), the procoagulant was incidentally injected into the femoral artery causing acute leg ischemia. Eight patients received local lysis therapy with alteplase via a contralateral femoral access. One patient underwent surgery. On average, 21 mg alteplase (4-35 mg) were administered within 14 h (4-21 h). The course of the lysis was followed angiographyically and clinically. All patients were inteerviewed by telephone 23 months (4-35 months) later.Results: In 3 patients, lysis was complete. In 5 patients, only little thrombotic material remained. In all patients, symptoms of ischemia resolved completely within the first hours after initiation of lysis. In 5 cases, bleeding occurred at the puncture site closed with the Duett device during lysis, including development of a false aneurysm in 2 cases. Complications led to premature termination (n=2) or interruption of the lysis (n=3). All complications were treated conservatively. Clinically, long-term sequelae were paresthesia and hypoesthesia in the lower leg and foot in 2 patients treated with lysis, and in the patient who underwent surgery. (orig.) [German] Ziel: Das Ergebnis der Alteplase-Lysetherapie von Embolien nach Einsatz des Duett-Verschluss-Systems wurde retrospektiv untersucht. Methoden: Innerhalb von 3,5 Jahren wurde nach 1398 Angiographien das Duett-System zum Verschluss der femoralen Punktionsstelle eingesetzt. Das System besteht aus einem Ballon und einem fluessigen Prokoagulans (Kollagen, Thrombin), das

  14. Kayenta Township Building & Safety Department, Tribal Green Building Code Summit Presentation

    Science.gov (United States)

    Tribal Green Building Code Summit Presentation by Kayenta Township Building & Safety Department showing how they established the building department, developed a code adoption and enforcement process, and hired staff to carry out the work.

  15. 78 FR 56703 - Office of Federal High-Performance Green Buildings; Green Building Advisory Committee...

    Science.gov (United States)

    2013-09-13

    ... Federal High-Performance Green Buildings; Green Building Advisory Committee; Notification of Upcoming... Green Building Advisory Committee Meeting (the Committee) and the schedule for a series of conference..., Designated Federal Officer, [[Page 56704

  16. Selecting Energy Efficient Building Envelope Retrofits to Existing Department of Defense Building Using Value Focused Thinking

    National Research Council Canada - National Science Library

    Pratt, David M

    2006-01-01

    ... these facilities that have the greatest potential for energy efficient building envelope retrofits. There are hundreds of various new building envelope technologies available to retrofit an existing building envelope, including window, roof, and wall technologies...

  17. Building Maintenance in Old Buildings Conservation Approach: An Overview of Related Problems

    Directory of Open Access Journals (Sweden)

    Brit Kayan

    2006-12-01

    Full Text Available Building maintenance in conservation of old buildings is one of the approaches applied within the built environment of Malaysia. For instance, it is realised that these old buildings contribute an important significance to our nation's priceless heritage and unique historical development. However, most of these buildings' maintenance is influenced by related problems that affect the overall building conservation approach. Therefore, these old buildings face problems which greatly affect their overall condition and performance: building structure; building appearance and aesthetic; building materials and building character. In most critical situations, there is a greater possibility that we could lose the cultural significance and heritage values of these old buildings through ignoring the related problems. This paper tries to identify the related problems, reveal the findings and discuss suitable approaches to conserving these old buildings.

  18. Comparison between Dutch and German buildings

    Energy Technology Data Exchange (ETDEWEB)

    Lony, R.J.M.; Molenaar, D.J.; Rietkerk, J.; Schuiling, D.J.B.W.; Zeiler, W. [TU/e, Univ. of Technology Eindhoven (Netherlands); Brunk, M. [RWTH Aachen (Germany)

    2006-07-01

    German buildings are often seen as an example to Dutch architects and Dutch building services consultants. Goal of this article is to examine and to understand differences between the Dutch and German top office buildings. Objective is to examine to which extent these buildings were designed intelligently. An Intelligent Building is one that provides a productive cost effective environment through the optimisation of six basic elements; site, skin, systems, structures, services, space plan and staff and the interrelationship between them. Based on these six aspects the comparison is made between Dutch and German buildings. (orig.)

  19. Energy audit role in building planning

    Science.gov (United States)

    Sipahutar, Riman; Bizzy, Irwin

    2017-11-01

    An energy audit is one way to overcome the excessive use of energy in buildings. The increasing growth of population, economy, and industry will have an impact on energy demand and the formation of greenhouse gas emissions. Indonesian National Standard (SNI) concerning the building has not been implemented optimally due to the socialization process by a government not yet been conducted. An energy audit of buildings has been carried out at offices and public services. Most electrical energy in buildings used for air refresher equipment or air conditioning. Calculation of OTTV has demonstrated the importance of performing since the beginning of the planning of a building to get energy-efficient buildings.

  20. Ecological modernization of sustainable buildings

    DEFF Research Database (Denmark)

    Jensen, Jesper Ole; Gram-Hanssen, Kirsten

    2008-01-01

    This article will examine how the contemporary development of sustainable buildings has been influenced by the concept of ecological modernisation. Ecological modernisation is a policy concept describing how environmental considerations are increasingly being integrated into modern society...... driven by enthusiasts and grassroots to being a more widespread, generally obtainable and integrated product. We will discuss to what degree this can be understood within the ideas of ecological modernisation, and then discuss the benefits and drawbacks of this development. Based on the concepts...... of governance, standardisation and visibility, the conclusion is that in many ways ecological modernisation has penetrated in Danish sustainable buildings and has contributed to a positive development. However, there are aspects of sustainable consumption that this development does not relate to, including...