Geographic Names Information System (GNIS) Structures

Data.gov (United States)

Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

Cartography and Geographic Information Science in Current Contents

Directory of Open Access Journals (Sweden)

Nedjeljko Frančula

2009-12-01

Full Text Available The Cartography and Geographic Information Science (CaGIS journal was published as The American Cartographer from 1974 to 1989, after that as Cartography and Geographic Information System, and since then has been published with its current name. It is published by the Cartography and Geographic Information Society, a member of the American Congress on Surveying and Mapping.

The informed application of building-integrated wind power

Energy Technology Data Exchange (ETDEWEB)

Breshears, J.; Briscoe, C. [Zimmer Gunsal Frasca Architects, Portland, OR (United States)

2009-07-01

This paper reported on an exercise that was undertaken to integrate small-scale wind turbines into the design of an urban high-rise in Portland, Oregon. Wind behaviour in the urban environment is very complex, as the flow of wind over and around buildings often triggers multiple transitions of the air from laminar flow to turbulent. The study documented the process of moving beyond a simplistic approach to a truly informed application of building-integrated wind generation. The 4 key issues addressed in the study process were quantifying the geographical wind regime; predicting wind flow over the building; turbine selection; and pragmatics regarding the design of roof mounting to accommodate structural loads and mitigate vibration. The results suggested that the turbine array should produce in the range of only 1 per cent of the electrical load of the building. 13 refs., 11 figs.

Compressing interpreted satellite imagery for geographic information systems applications over extensive regions

Science.gov (United States)

Miller, Stephan W.

1981-01-01

Image processing systems (IPS) and techniques effectively transform satellite imagery into data for input into a spatial database. Geographic information systems (GIS), consisting of graphic input and spatial database management subsystems, are capable of processing digital map and map overlay data to build and manipulate a spatial database. These systems can be successfully integrated to create a successful spatial data handling capability provided certain obstacle are understood and overcome.

Developing geographic information infrastructure : The role of information policies

NARCIS (Netherlands)

Van Loenen, B.

2006-01-01

Within information societies, information availability is a key issue affecting societyâs well being. The infrastructure underlying the foundation of the information society may be referred to as the information infrastructure. A geographic information infrastructure (GII) supports the information

Geographic Names Information System (GNIS) for Lousiana, Geographic NAD83, USGS (2007) [GNIS_LA_USGS_2007

Data.gov (United States)

Louisiana Geographic Information Center — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

Surveying and Mapping Geographical Information from the Perspective of Geography

Directory of Open Access Journals (Sweden)

LÜ Guonian

2017-10-01

Full Text Available It briefly reviewed the history of geographic information content development since the existence of geographic information system. It pointed out that the current definition of geographic information is always the extension from the "spatial+ attributes" basic mapping framework of geographic information. It is increasingly difficult to adapt to the analysis and application of spatial-temporal big data. From the perspective of geography research subject and content, it summarized systematically that the content and extension of the "geographic information" that geography needs. It put forward that a six-element expression model of geographic information, including spatial location, semantic description, attribute characteristics, geometric form, evolution process, and objects relationship.Under the guidance of the laws of geography, for geographical phenomenon of spatial distribution, temporal pattern and evolution process, the interaction mechanism of the integrated expression, system analysis and efficient management, it designed that a unified GIS data model which is expressed by six basic elements, a new GIS data structure driven by geographical rules and interaction, and key technologies of unstructured spatio-temporal data organization and storage. It provided that a theoretical basis and technical support for the shift from the surveying and mapping geographic information to the scientific geographic information, and it can help improving the organization, management, analysis and expression ability of the GIS of the geographical laws such as geographical pattern, evolution process, and interaction between elements.

Geographical Information System Model for Potential Mines Data Management Presentation in Kabupaten Gorontalo

Science.gov (United States)

Roviana, D.; Tajuddin, A.; Edi, S.

2017-03-01

Mining potential in Indonesian is very abundant, ranging from Sabang to Marauke. Kabupaten Gorontalo is one of many places in Indonesia that have different types of minerals and natural resources that can be found in every district. The abundant of mining potential must be balanced with good management and ease of getting information by investors. The current issue is, (1) ways of presenting data/information about potential mines area is still manually (the maps that already capture from satellite image, then printed and attached to information board in the office) it caused the difficulties of getting information; (2) the high cost of maps printing; (3) the difficulties of regency leader (bupati) to obtain information for strategic decision making about mining potential. The goal of this research is to build a model of Geographical Information System that could provide data management of potential mines, so that the investors could easily get information according to their needs. To achieve that goal Research and Development method is used. The result of this research, is a model of Geographical Information System that implemented in an application to presenting data management of mines.

Generalisation of geographic information cartographic modelling and applications

CERN Document Server

Mackaness, William A; Sarjakoski, L Tiina

2011-01-01

Theoretical and Applied Solutions in Multi Scale MappingUsers have come to expect instant access to up-to-date geographical information, with global coverage--presented at widely varying levels of detail, as digital and paper products; customisable data that can readily combined with other geographic information. These requirements present an immense challenge to those supporting the delivery of such services (National Mapping Agencies (NMA), Government Departments, and private business. Generalisation of Geographic Information: Cartographic Modelling and Applications provides detailed review

OLYMPUS DISS - A Readily Implemented Geographic Data and Information Sharing System

Science.gov (United States)

Necsoiu, D. M.; Winfrey, B.; Murphy, K.; McKague, H. L.

2002-12-01

Electronic information technology has become a crucial component of business, government, and scientific organizations. In this technology era, many enterprises are moving away from the perception that information repositories are only a tool for decision-making. Instead, many organizations are learning that information systems, which are capable of organizing and following the interrelations between information and both the short-term and strategic organizational goals, are assets themselves, with inherent value. Olympus Data and Information Sharing System (DISS) is a system developed at the Center for Nuclear Waste Regulatory Analyses (CNWRA) to solve several difficult tasks associated with the management of geographical, geological and geophysical data. Three of the tasks were to (1) gather the large amount of heterogeneous information that has accumulated over the operational lifespan of CNWRA, (2) store the data in a central, knowledge-based, searchable database and (3) create quick, easy, convenient, and reliable access to that information. Faced with these difficult tasks CNWRA identified the requirements for designing such a system. Key design criteria were: (a) ability to ingest different data formats (i.e., raster, vector, and tabular data); (b) minimal expense using open-source and commercial off-the-shelf software; (c) seamless management of geospatial data, freeing up time for researchers to focus on analyses or algorithm development, rather than on time consuming format conversions; (d) controlled access; and (e) scalable architecture to meet new and continuing demands. Olympus DISS is a solution that can be easily adapted to small and mid-size enterprises dealing with heterogeneous geographic data. It uses established data standards, provides a flexible mechanism to build applications upon and output geographic data in multiple and clear ways. This abstract is an independent product of the CNWRA and does not necessarily reflect the views or

Geographic Names Information System (GNIS) Transportation Features

Data.gov (United States)

Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

Geographic Names Information System (GNIS) Historical Features

Data.gov (United States)

Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

Geographic Names Information System (GNIS) Admin Features

Data.gov (United States)

Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

Geographic Names Information System (GNIS) Hydrography Lines

Data.gov (United States)

Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

Geographic Names Information System (GNIS) Cultural Features

Data.gov (United States)

Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

Geographic Names Information System (GNIS) Landform Features

Data.gov (United States)

Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

Geographic Names Information System (GNIS) Hydrography Points

Data.gov (United States)

Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

Geographic Names Information System (GNIS) Community Features

Data.gov (United States)

Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

Geographic Names Information System (GNIS) Antarctica Features

Data.gov (United States)

Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

BIM. Building Information Model. Special issue; BIM. Building Information Model. Themanummer

Energy Technology Data Exchange (ETDEWEB)

Van Gelder, A.L.A. [Arta and Consultancy, Lage Zwaluwe (Netherlands); Van den Eijnden, P.A.A. [Stichting Marktwerking Installatietechniek, Zoetermeer (Netherlands); Veerman, J.; Mackaij, J.; Borst, E. [Royal Haskoning DHV, Nijmegen (Netherlands); Kruijsse, P.M.D. [Wolter en Dros, Amersfoort (Netherlands); Buma, W. [Merlijn Media, Waddinxveen (Netherlands); Bomhof, F.; Willems, P.H.; Boehms, M. [TNO, Delft (Netherlands); Hofman, M.; Verkerk, M. [ISSO, Rotterdam (Netherlands); Bodeving, M. [VIAC Installatie Adviseurs, Houten (Netherlands); Van Ravenswaaij, J.; Van Hoven, H. [BAM Techniek, Bunnik (Netherlands); Boeije, I.; Schalk, E. [Stabiplan, Bodegraven (Netherlands)

2012-11-15

A series of 14 articles illustrates the various aspects of the Building Information Model (BIM). The essence of BIM is to capture information about the building process and the building product. [Dutch] In 14 artikelen worden diverse aspecten m.b.t. het Building Information Model (BIM) belicht. De essentie van BIM is het vastleggen van informatie over het bouwproces en het bouwproduct.

Analysis Of Educational Services Distribution-Based Geographic Information System GIS

Directory of Open Access Journals (Sweden)

Waleed Lagrab

2015-03-01

Full Text Available Abstract This study analyzes the spatial distribution of kindergarten facilities in the study area based on the Geographic Information Systems GIS in order to test an efficiency of GIS technology to redistribute the existing kindergarten and choose the best location in the future and applying the standard criteria for selecting the suitable locations for kindergarten. To achieve this goal the data and information are collected via interviews and comprehensive statistics on the education facilities in Mukalla districts in YEMEN which contributed to building a geographic database for the study area. After that the Kindergarten spatial patterns are analyzed in terms of proximity to each other and used near some other land in the surrounding area such as streets highways factories etc. Also measures the concentration dispersion clustering and distribution direction for the kindergarten this study showed the effectiveness of the GIS for spatial data analysis. One of the most important finding that most of the Kindergarten was established in Mukalla city did not take into account the criteria that set by the authorities. Furthermore almost district suffers from a shortage in the number of kindergarten and pattern of distribution of those kindergartens dominated by spatial dispersed.

The Recognition of Overpass in Volunteered Geographic Information

Directory of Open Access Journals (Sweden)

MA Chao

2017-02-01

Full Text Available The paper presents an overpass recognition method in volunteered geographic information based on the geometry and attribute characteristics. The structure of the overpass is divided into the main bridge parts and the affiliated facilities. The main bridge parts with distinctive characters could be treated as a two-class classification problem. The characteristic vectors could build on the foundation of analysis and quantization the geometry and attribute characteristics. Then, the main bridge is recognized automatically through the support vector machine. The affiliated facilities of the overpass are recognized based on the main bridge with some relevant judgment rules. The OpenStreetMap(osm is selected for the experiment. The results show that the method could effectively recognize the overpass and could provide help for the road simplification and walking guidance.

Modelling Technology for Building Fire Scene with Virtual Geographic Environment

Science.gov (United States)

Song, Y.; Zhao, L.; Wei, M.; Zhang, H.; Liu, W.

2017-09-01

Building fire is a risky activity that can lead to disaster and massive destruction. The management and disposal of building fire has always attracted much interest from researchers. Integrated Virtual Geographic Environment (VGE) is a good choice for building fire safety management and emergency decisions, in which a more real and rich fire process can be computed and obtained dynamically, and the results of fire simulations and analyses can be much more accurate as well. To modelling building fire scene with VGE, the application requirements and modelling objective of building fire scene were analysed in this paper. Then, the four core elements of modelling building fire scene (the building space environment, the fire event, the indoor Fire Extinguishing System (FES) and the indoor crowd) were implemented, and the relationship between the elements was discussed also. Finally, with the theory and framework of VGE, the technology of building fire scene system with VGE was designed within the data environment, the model environment, the expression environment, and the collaborative environment as well. The functions and key techniques in each environment are also analysed, which may provide a reference for further development and other research on VGE.

Integration of Geographical Information Systems and Geophysical Applications with Distributed Computing Technologies.

Science.gov (United States)

Pierce, M. E.; Aktas, M. S.; Aydin, G.; Fox, G. C.; Gadgil, H.; Sayar, A.

2005-12-01

We examine the application of Web Service Architectures and Grid-based distributed computing technologies to geophysics and geo-informatics. We are particularly interested in the integration of Geographical Information System (GIS) services with distributed data mining applications. GIS services provide the general purpose framework for building archival data services, real time streaming data services, and map-based visualization services that may be integrated with data mining and other applications through the use of distributed messaging systems and Web Service orchestration tools. Building upon on our previous work in these areas, we present our current research efforts. These include fundamental investigations into increasing XML-based Web service performance, supporting real time data streams, and integrating GIS mapping tools with audio/video collaboration systems for shared display and annotation.

Research and implementation of geographic information service mode in digital home

Science.gov (United States)

Lei, B.; Liu, K.; Gan, Y.; Zhong, M.

2014-04-01

Accompanying infrastructure improvements and networking technology innovation, the development of digital home service industry has gotten more and more attention. However, the digital home service levels have not sufficiently met rising demand from users. Therefore, it is urgent to propose and develop new service modes for the digital home. Geographic information services can provide various spatial information services such as map search, spatial information query. It has become an inevitable trend to implement geographic information services in the digital home. This paper proposes three new geographic information services modes for the digital home after sufficient requirement analysis: pushed information service mode, interactive information service mode, personalized information service mode. The key technologies to implement geographic information services on digital televisions are studied, involving digital television middleware technology, network transmission technology and visualization technology. According to the service modes' characteristics mentioned above, a service system in the digital home is established to implement geographic information services on the basis of digital television. The implementation of geographic information services in the digital home not only enriches the digital home services content, but also promotes geographic information from specialization to public popularity.

Ontology for cell-based geographic information

Science.gov (United States)

Zheng, Bin; Huang, Lina; Lu, Xinhai

2009-10-01

Inter-operability is a key notion in geographic information science (GIS) for the sharing of geographic information (GI). That requires a seamless translation among different information sources. Ontology is enrolled in GI discovery to settle the semantic conflicts for its natural language appearance and logical hierarchy structure, which are considered to be able to provide better context for both human understanding and machine cognition in describing the location and relationships in the geographic world. However, for the current, most studies on field ontology are deduced from philosophical theme and not applicable for the raster expression in GIS-which is a kind of field-like phenomenon but does not physically coincide to the general concept of philosophical field (mostly comes from the physics concepts). That's why we specifically discuss the cell-based GI ontology in this paper. The discussion starts at the investigation of the physical characteristics of cell-based raster GI. Then, a unified cell-based GI ontology framework for the recognition of the raster objects is introduced, from which a conceptual interface for the connection of the human epistemology and the computer world so called "endurant-occurrant window" is developed for the better raster GI discovery and sharing.

Geographical information systems and computer cartography

CERN Document Server

Jones, Chris B

2014-01-01

A concise text presenting the fundamental concepts in Geographical Information Systems (GIS), emphasising an understanding of techniques in management, analysis and graphic display of spatial information. Divided into five parts - the first part reviews the development and application of GIS, followed by a summary of the characteristics and representation of geographical information. It concludes with an overview of the functions provided by typical GIS systems. Part Two introduces co-ordinate systems and map projections, describes methods for digitising map data and gives an overview of remote sensing. Part Three deals with data storage and database management, as well as specialised techniques for accessing spatial data. Spatial modelling and analytical techniques for decision making form the subject of Part Four, while the final part is concerned with graphical representation, emphasising issues of graphics technology, cartographic design and map generalisation.

GNIS: Geographic Names Information Systems - All features (2013)

Data.gov (United States)

Earth Data Analysis Center, University of New Mexico — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

Building information deduced

DEFF Research Database (Denmark)

Tamke, Martin; Myrup Jensen, Morten; Beetz, Jakob

2014-01-01

In recent years, Building Information Models have become commonplace in building profession. The extensive use and increasing experience with BIM models offers new perspectives and potentials for design and planning. A recent stakeholder study conducted by the authors of this paper show that in p......In recent years, Building Information Models have become commonplace in building profession. The extensive use and increasing experience with BIM models offers new perspectives and potentials for design and planning. A recent stakeholder study conducted by the authors of this paper show...... that in practice models are no longer solely observed as culmination of knowledge in a 3d representation of future built structures, but as a source of information in itself. Experienced users of BIM want to Find Information within a model or across a set of these and Compare models in order to evaluate states...... of a model, differences in separate models or models from different point of time. Current BIM tools support both modes only in a rudimentary form. This paper discusses current modes of information query within and across BIM models, shows beneficial scenarios for building and planning practice through...

Interoperability of Geographic Information: A Communication Process –Based Prototype

Directory of Open Access Journals (Sweden)

Jean Brodeur

2005-04-01

Full Text Available Since 1990, municipal, state/provincial, and federal governments have developed numerous geographic databases over the years to fulfill organizations' specific needs. As such, same real world topographic phenomena have been abstracted differently, for instance vegetation (surface, trees (surface, wooded area (line, wooded area (point and line, milieu boisé (surface, zone boisée (unknown geometry. Today, information about these geographic phenomena is accessible on the Internet from Web infrastructures specially developed to simplify their access. Early in the nineties, the development of interoperability of geographic information has been undertaken to solve syntactic, structural, and semantic heterogeneities as well as spatial and temporal heterogeneities to facilitate sharing and integration of such data. Recently, we have proposed a new conceptual framework for interoperability of geographic information based on the human communication process, cognitive science, and ontology, and introduced geosemantic proximity, a reasoning methodology to qualify dynamically the semantic similarity between geographic abstractions. This framework could be of interest to other disciplines. This paper presents the details of our framework for interoperability of geographic information as well as a prototype.

Review of Current Geographic Information Systems Technology for TxDOT Pavement Management Information System

Science.gov (United States)

1998-05-01

A geographic information system (GIS) is a tool for effectively managing and analyzing tremendous amounts of geographic information. It employs the essential principle of geography to organize in formation and express relationships between real-world...

Non-professional user`s understanding of Geographic Information

DEFF Research Database (Denmark)

Arleth, Mette

2003-01-01

of digital media, including online access to a variety of GI-based services; maps, online Geographic information systems, interactive 3D models etc. However, can we expect that a citizen, who has no relevant professional basis for understanding the concept geographic information, be able to use GI......-based online services and comprehend the information contents? Using the Gi-based online services qualitatively in the participatory process obviously requires knowledge of the non-professional user`s understanding and use of GI. This paper discusses the needs for research into this field as well as relevant...

application of geographic information system (gis) in industrial land ...

African Journals Online (AJOL)

DEPHILIHS

Land capability index mapping using Geographic Information System (GIS) principles was used for this study. The study was undertaken using Arc View ... Geographic Information Systems (GIS) is one of the best approaches for this type of ..... western segments and to a small extent the east. Some of the available lands are ...

Using geographical information systems in planning NLLP decommissioning and environmental restoration activities

International Nuclear Information System (INIS)

McGregor, R.; Turner, W.

2011-01-01

The Nuclear Legacy Liabilities Program (NLLP) manages Canada's nuclear legacy liabilities at Atomic Energy of Canada Limited (AECL) sites and is funded by the Government of Canada through Natural Resources Canada (NRCan). Through the first five years of the Program these two organizations have worked collaboratively to bring numerous projects to completion. In addition to the diversity of facilities and waste dealt with under the NLLP, the Program involves seven sites in three different provinces. The breadth of the Program encompasses over 20 different projects at AECL's Chalk River Laboratories (CRL) site alone, with new projects evolving as work continues. Nuclear legacy liabilities are the result of over 60 years of nuclear research and development conducted by the National Research Council of Canada (1944 to 1952) and AECL (1952 to 2006) on behalf of the Government of Canada. The liabilities consist of outdated and unused research facilities and buildings, a wide variety of buried and stored radioactive waste, and affected lands. Since 1952, AECL has safely and cost effectively managed Canada's nuclear research facilities and the waste generated by their operation. During this time AECL improved waste management technologies and developed expertise in best practices. All projects undertaken by the NLLP contain a spatial, or geographically referenced, component that can be captured in a geographic information system (GIS). From the decommissioning of a single building within the plant itself (e.g. the building location itself or spaces within the building) to the process of locating a new facility within the CRL site (e.g. location within the CRL property in three dimensions and adjacency to other communities) all these projects contain spatially referenced information. This spatial information can be captured, organized and used by the GIS software to analyze and model any number of questions. The paper will discuss projects that address a

Development of the OCRWM transportation geographic information system

International Nuclear Information System (INIS)

Peck, M. III; McGuinn, E.J.; Osborne, J.W.

1995-01-01

The U.S. Department of Energy's (DOE) Office of Civilian Radioactive Waste Management (OCRWM) is responsible for disposing of the nation's high-level radioactive waste. Current plans call for OCRWM to ship commercial spent nuclear fuel (SNF) from 77 individual reactor sites to a central facility for disposal. The Transportation Geographic Information System (TGIS) is a valuable tool in planning for the SNF shipments and communicating with the public regarding the shipments. The TGIS consists of a geographic information system (GIS) combined with a set of databases that provide data on specific geographic areas, transportation networks, and point locations. Planning activities may include analyzing possible routing options or criteria, highlighting route-specific attributes such as the location of culturally sensitive areas, providing route-specific data such as accident statistics, determining the affected population density along a route to support risk assessment activities, or providing emergency response information such as responder locations and hospitals along the proposed routes. The TGIS is a useful communication tool in helping to address the public's concern over how the shipments will be managed, particularly in the area of route selection by providing graphic portrayals of potential routes in their true geographic contexts

A Systems Perspective on Volunteered Geographic Information

Directory of Open Access Journals (Sweden)

Victoria Fast

2014-12-01

Full Text Available Volunteered geographic information (VGI is geographic information collected by way of crowdsourcing. However, the distinction between VGI as an information product and the processes that create VGI is blurred. Clearly, the environment that influences the creation of VGI is different than the information product itself, yet most literature treats them as one and the same. Thus, this research is motivated by the need to formalize and standardize the systems that support the creation of VGI. To this end, we propose a conceptual framework for VGI systems, the main components of which—project, participants, and technical infrastructure—form an environment conducive to the creation of VGI. Drawing on examples from OpenStreetMap, Ushahidi, and RinkWatch, we illustrate the pragmatic relevance of these components. Applying a system perspective to VGI allows us to better understand the components and functionality needed to effectively create VGI.

China's Mission in Surveying, Mapping and Geographic Information during Global Governance

Science.gov (United States)

Jia, D.; Xue, C.; Chen, X.

2018-04-01

In the new era, it is proposed that China should be transformed from a participant and a cooperator into a designer, an impeller and a leader, continue taking an effect of responsible great power, increase public product supply, perfect a global governance system and contribute to China's wisdom and China's schemes during global governance, thus surveying and mapping geographic information takes on great mission. On the one hand, we have to timely grasp global geographic information data resources to provide an important scientific data support for China's wisdom and China's schemes. On the other hand, we have to provide surveying and mapping geographic information infrastructure construction and public products for developing countries, support location services within a global territorial scope, and realize the smoothness of talent flow, material flow and information flow between China and countries in the world. Meanwhile, external assistance and international communication and cooperation of surveying and mapping geographic information are also enhanced, and popularization and application of a geographic information technology in underdeveloped countries and regions are promoted.

Model for Determining Geographical Distribution of Heat Saving Potentials in Danish Building Stock

Directory of Open Access Journals (Sweden)

Stefan Petrovic

2014-02-01

Full Text Available Since the global oil crisis in the 1970s, Denmark has followed a path towards energy independency by continuously improving its energy efficiency and energy conservation. Energy efficiency was mainly tackled by introducing a high number of combined heat and power plants in the system, while energy conservation was predominantly approached by implementing heat saving measures. Today, with the goal of 100% renewable energy within the power and heat sector by the year 2035, reductions in energy demand for space heating and the preparation of domestic hot water remain at the top of the agenda in Denmark. A highly detailed model for determining heat demand, possible heat savings and associated costs in the Danish building stock is presented. Both scheduled and energy-saving renovations until year 2030 have been analyzed. The highly detailed GIS-based heat atlas for Denmark is used as a container for storing data about physical properties for 2.5 million buildings in Denmark. Consequently, the results of the analysis can be represented on a single building level. Under the assumption that buildings with the most profitable heat savings are renovated first, the consequences of heat savings for the economy and energy system have been quantified and geographically referenced. The possibilities for further improvements of the model and the application to other geographical regions have been discussed.

Combining Land Capability Evaluation, Geographic Information ...

African Journals Online (AJOL)

Combining Land Capability Evaluation, Geographic Information Systems, AnD Indigenous Technologies for Soil Conservation in Northern Ethiopia. ... Land capability and land use status were established following the procedures of a modified treatment-oriented capability classification using GIS. The case study ...

Geographic information system for Long Island: An epidemiologic systems approach to identify environmental breast cancer risks on Long Island. Phase 1

Energy Technology Data Exchange (ETDEWEB)

Barancik, J.I.; Kramer, C.F.; Thode, H.C. Jr.

1995-12-01

BNL is developing and implementing the project ``Geographic Information System (GIS) for Long Island`` to address the potential relationship of environmental and occupational exposures to breast cancer etiology on Long Island. The project is divided into two major phases: The four month-feasibility project (Phase 1), and the major development and implementation project (Phase 2). This report summarizes the work completed in the four month Phase 1 Project, ``Feasibility of a Geographic Information System for Long Island.`` It provides the baseline information needed to further define and prioritize the scope of work for subsequent tasks. Phase 2 will build upon this foundation to develop an operational GIS for the Long Island Breast Cancer Study Project (LIBCSP).

Geographic information system for Long Island: An epidemiologic systems approach to identify environmental breast cancer risks on Long Island. Phase 1

International Nuclear Information System (INIS)

Barancik, J.I.; Kramer, C.F.; Thode, H.C. Jr.

1995-01-01

BNL is developing and implementing the project ''Geographic Information System (GIS) for Long Island'' to address the potential relationship of environmental and occupational exposures to breast cancer etiology on Long Island. The project is divided into two major phases: The four month-feasibility project (Phase 1), and the major development and implementation project (Phase 2). This report summarizes the work completed in the four month Phase 1 Project, ''Feasibility of a Geographic Information System for Long Island.'' It provides the baseline information needed to further define and prioritize the scope of work for subsequent tasks. Phase 2 will build upon this foundation to develop an operational GIS for the Long Island Breast Cancer Study Project (LIBCSP)

Using a 'value-added' approach for contextual design of geographic information.

Science.gov (United States)

May, Andrew J

2013-11-01

The aim of this article is to demonstrate how a 'value-added' approach can be used for user-centred design of geographic information. An information science perspective was used, with value being the difference in outcomes arising from alternative information sets. Sixteen drivers navigated a complex, unfamiliar urban route, using visual and verbal instructions representing the distance-to-turn and junction layout information presented by typical satellite navigation systems. Data measuring driving errors, navigation errors and driver confidence were collected throughout the trial. The results show how driver performance varied considerably according to the geographic context at specific locations, and that there are specific opportunities to add value with enhanced geographical information. The conclusions are that a value-added approach facilitates a more explicit focus on 'desired' (and feasible) levels of end user performance with different information sets, and is a potentially effective approach to user-centred design of geographic information. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Design and Establishment of Quality Model of Fundamental Geographic Information Database

Science.gov (United States)

Ma, W.; Zhang, J.; Zhao, Y.; Zhang, P.; Dang, Y.; Zhao, T.

2018-04-01

In order to make the quality evaluation for the Fundamental Geographic Information Databases(FGIDB) more comprehensive, objective and accurate, this paper studies and establishes a quality model of FGIDB, which formed by the standardization of database construction and quality control, the conformity of data set quality and the functionality of database management system, and also designs the overall principles, contents and methods of the quality evaluation for FGIDB, providing the basis and reference for carry out quality control and quality evaluation for FGIDB. This paper designs the quality elements, evaluation items and properties of the Fundamental Geographic Information Database gradually based on the quality model framework. Connected organically, these quality elements and evaluation items constitute the quality model of the Fundamental Geographic Information Database. This model is the foundation for the quality demand stipulation and quality evaluation of the Fundamental Geographic Information Database, and is of great significance on the quality assurance in the design and development stage, the demand formulation in the testing evaluation stage, and the standard system construction for quality evaluation technology of the Fundamental Geographic Information Database.

GNIS: Geographic Names Information Systems - All features

Data.gov (United States)

Earth Data Analysis Center, University of New Mexico — The Geographic Names Information System (GNIS) actively seeks data from and partnerships with Government agencies at all levels and other interested organizations....

Research on a Method of Geographical Information Service Load Balancing

Science.gov (United States)

Li, Heyuan; Li, Yongxing; Xue, Zhiyong; Feng, Tao

2018-05-01

With the development of geographical information service technologies, how to achieve the intelligent scheduling and high concurrent access of geographical information service resources based on load balancing is a focal point of current study. This paper presents an algorithm of dynamic load balancing. In the algorithm, types of geographical information service are matched with the corresponding server group, then the RED algorithm is combined with the method of double threshold effectively to judge the load state of serve node, finally the service is scheduled based on weighted probabilistic in a certain period. At the last, an experiment system is built based on cluster server, which proves the effectiveness of the method presented in this paper.

Exploring the potentials of volunteered geographic Information as a source for spatial data acquisition

International Nuclear Information System (INIS)

Ariffin, Izyana; Solemon, Badariah; Anwar, Rina Md; Din, Marina Md; Azmi, Nor Nashrah

2014-01-01

The advancement of technologies nowadays enables participation by nonprofessionals, known as volunteers to participate in producing, sharing and consuming geographic information. Such information, termed as volunteered geographic Information (VGI) has created a new approach of gathering geographic information. This paper discusses the traditional way of acquiring geographic information and potentials of VGI as an information source in GIS applications. We also review four commonly cited applications which rely on volunteers for their geographic information based on five criteria; the geometry type available in the applications, availability of user profile, average number of attributes used in the applications, data type of the information (raster or vector) and the domain the application belongs to. This review serves as a preliminarv study in designing a GIS application used for asset management which aims at exploiting volunteers to produce geographic information related to assets

Developing Trainee Teacher Practice with Geographical Information Systems (GIS)

Science.gov (United States)

Walshe, Nicola

2017-01-01

There is general agreement that geographical information systems (GIS) have a place within the geography classroom; they offer the potential to support geographical learning, exploring real-world problems through student-centred learning, and developing spatial thinking. Despite this, teachers often avoid engaging with GIS and research suggests…

U.S.-Mexico Border Geographic Information System

Science.gov (United States)

Parcher, Jean W.

2008-01-01

Geographic Information Systems (GIS) and the development of extensive geodatabases have become invaluable tools for addressing a variety of contemporary societal issues and for making predictions about the future. The United States-Mexico Geographic Information System (USMX-GIS) is based on fundamental datasets that are produced and/or approved by the national geography agencies of each country, the U.S. Geological Survey (USGS) and the Instituto Nacional de Estadistica Y Geografia (INEGI) of Mexico, and the International Boundary and Water Commission (IBWC). The data are available at various scales to allow both regional and local analysis. The USGS and the INEGI have an extensive history of collaboration for transboundary mapping including exchanging digital technology and developing methods for harmonizing seamless national level geospatial datasets for binational environmental monitoring, urban growth analysis, and other scientific applications.

Putting fossils on the map: Applying a geographical information system to heritage resources

Directory of Open Access Journals (Sweden)

Merrill van der Walt

2015-11-01

Full Text Available A geographical information system (GIS database was compiled of Permo-Triassic tetrapod fossils from the Karoo Supergoup in South African museum collections. This database is the first of its kind and has great time applicability for understanding tetrapod biodiversity change though time more than 200 million years ago. Because the museum catalogues all differed in recorded information and were not compliant with field capture requirements, this information had to be standardised to a format that could be utilised for archival and research application. Our paper focuses on the processes involved in building the GIS project, capturing metadata on fossil collections and formulating future best practices. The result is a multi-layered GIS database of the tetrapod fossil record of the Beaufort Group of South Africa for use as an accurate research tool in palaeo- and geoscience research with applications for ecology, ecosystems, stratigraphy and basin development.

A preliminary geodetic data model for geographic information systems

Science.gov (United States)

Kelly, K. M.

2009-12-01

Our ability to gather and assimilate integrated data collections from multiple disciplines is important for earth system studies. Moreover, geosciences data collection has increased dramatically, with pervasive networks of observational stations on the ground, in the oceans, in the atmosphere and in space. Contemporary geodetic observations from several space and terrestrial technologies contribute to our knowledge of earth system processes and thus are a valuable source of high accuracy information for many global change studies. Assimilation of these geodetic observations and numerical models into models of weather, climate, oceans, hydrology, ice, and solid Earth processes is an important contribution geodesists can make to the earth science community. Clearly, the geodetic observations and models are fundamental to these contributions. ESRI wishes to provide leadership in the geodetic community to collaboratively build an open, freely available content specification that can be used by anyone to structure and manage geodetic data. This Geodetic Data Model will provide important context for all geographic information. The production of a task-specific geodetic data model involves several steps. The goal of the data model is to provide useful data structures and best practices for each step, making it easier for geodesists to organize their data and metadata in a way that will be useful in their data analyses and to their customers. Built on concepts from the successful Arc Marine data model, we introduce common geodetic data types and summarize the main thematic layers of the Geodetic Data Model. These provide a general framework for envisioning the core feature classes required to represent geodetic data in a geographic information system. Like Arc Marine, the framework is generic to allow users to build workflow or product specific geodetic data models tailored to the specific task(s) at hand. This approach allows integration of the data with other existing

IL FENOMENO VOLUNTEERED GEOGRAPHIC INFORMATION

Directory of Open Access Journals (Sweden)

Flavio Lupia

2014-12-01

Full Text Available The contribution addresses the phenomenon of Voluntereed Geographic Informationexplaining these new and burgeoning sources of information offers multidisciplinary scientists an unprecedented opportunity to conduct research on a variety of topics at multiple spatial and temporal scales. In particular the contribution refers to two COST Actions which have been recently activated on the subject which areparticularly relevant for the growing of the European scientific community.

The Geographic Information Grid System Based on Mobile Agent

Institute of Scientific and Technical Information of China (English)

无

2006-01-01

We analyze the deficiencies of current application systems, and discuss the key requirements of distributed Geographic Information service (GIS). We construct the distributed GIS on grid platform. Considering the flexibility and efficiency, we integrate the mobile agent technology into the system. We propose a new prototype system, the Geographic Information Grid System (GIGS) based on mobile agent. This system has flexible services and high performance, and improves the sharing of distributed resources. The service strategy of the system and the examples are also presented.

Geographic information systems : challenges to effective data sharing : statement of Linda D. Koontz, Director, Information management issues

Science.gov (United States)

2003-06-10

Geographic information systems (GIS) manipulate, analyze, and graphically present an array of information associated with geographic locations, have been invaluable to all levels of government. The federal government has long been attempting to devel...

Usability of geographic information -- factors identified from qualitative analysis of task-focused user interviews.

Science.gov (United States)

Harding, Jenny

2013-11-01

Understanding user needs for geographic information and the factors which influence the usability of such information in diverse user contexts is an essential part of user centred development of information products. There is relatively little existing research focused on the design and usability of information products in general. This paper presents a research approach based on semi structured interviews with people working with geographic information on a day to day basis, to establish a reference base of qualitative data on user needs for geographic information with respect to context of use. From this reference data nine key categories of geographic information usability are identified and discussed in the context of limited existing research concerned with geographic information usability. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Geographic information system planning and monitoring best ...

African Journals Online (AJOL)

Poor urbanization policies, inefficient planning and monitoring technologies are evident. The consequences include some of the worst types of environmental hazards. Best urbanization practices require integrated planning approaches that result in environmental conservation. Geographic Information systems (GIS) provide ...

The Data Reliability of Volunteered Geographic Information with Using Traffic Accident Data

Science.gov (United States)

Sevinç, H. K.; Karaş, I. R.

2017-11-01

The development of mobile technologies is important in the lives of humans. Mobile devices constitute a great part of the daily lives of people. It has come to such a point that when people first wake up, they check their smart phones for the first thing. Users may share their positions with the GNSS sensors in mobile devices or they can add information about their positions in mobile applications. Users contribute to Geographical Information System with this sharing. These users consist of native (citizens) living in that geographical position not of the CBS specialists. Creating, collecting, sharing and disseminating the geographical data provided by voluntary individuals constitute the Volunteered Geographic Information System. The data in the Volunteered Geographic Information System are received from amateur users. "How reliable will the data received from amateur users instead of specialists of the field be in scientific terms?" In this study, the reliability between the data received from the voluntary users through Volunteered Geographic Information System and real data is investigated. The real data consist of the traffic accident coordinates. The data that will be received from users will be received through the speed values in the relevant coordinates and the marking of the users for possible accident points on the map.

Geographical information modelling for land resource survey

NARCIS (Netherlands)

Bruin, de S.

2000-01-01

The increasing popularity of geographical information systems (GIS) has at least three major implications for land resources survey. Firstly, GIS allows alternative and richer representation of spatial phenomena than is possible with the traditional paper map. Secondly, digital technology has

Development and evaluation of a geographic information retrieval system using fine grained toponyms

Directory of Open Access Journals (Sweden)

Damien Palacio

2015-12-01

Full Text Available Geographic information retrieval (GIR is concerned with returning information in response to an information need, typically expressed in terms of a thematic and spatial component linked by a spatial relationship. However, evaluation initiatives have often failed to show significant differences between simple text baselines and more complex spatially enabled GIR approaches. We explore the effectiveness of three systems (a text baseline, spatial query expansion, and a full GIR system utilizing both text and spatial indexes at retrieving documents from a corpus describing mountaineering expeditions, centred around fine grained toponyms. To allow evaluation, we use user generated content (UGC in the form of metadata associated with individual articles to build a test collection of queries and judgments. The test collection allowed us to demonstrate that a GIR-based method significantly outperformed a text baseline for all but very specific queries associated with very small query radii. We argue that such approaches to test collection development have much to offer in the evaluation of GIR.

Irregular Shaped Building Design Optimization with Building Information Modelling

Directory of Open Access Journals (Sweden)

Lee Xia Sheng

2016-01-01

Full Text Available This research is to recognise the function of Building Information Modelling (BIM in design optimization for irregular shaped buildings. The study focuses on a conceptual irregular shaped “twisted” building design similar to some existing sculpture-like architectures. Form and function are the two most important aspects of new buildings, which are becoming more sophisticated as parts of equally sophisticated “systems” that we are living in. Nowadays, it is common to have irregular shaped or sculpture-like buildings which are very different when compared to regular buildings. Construction industry stakeholders are facing stiff challenges in many aspects such as buildability, cost effectiveness, delivery time and facility management when dealing with irregular shaped building projects. Building Information Modelling (BIM is being utilized to enable architects, engineers and constructors to gain improved visualization for irregular shaped buildings; this has a purpose of identifying critical issues before initiating physical construction work. In this study, three variations of design options differing in rotating angle: 30 degrees, 60 degrees and 90 degrees are created to conduct quantifiable comparisons. Discussions are focused on three major aspects including structural planning, usable building space, and structural constructability. This research concludes that Building Information Modelling is instrumental in facilitating design optimization for irregular shaped building. In the process of comparing different design variations, instead of just giving “yes or no” type of response, stakeholders can now easily visualize, evaluate and decide to achieve the right balance based on their own criteria. Therefore, construction project stakeholders are empowered with superior evaluation and decision making capability.

Basic mapping principles for visualizing cancer data using Geographic Information Systems (GIS).

Science.gov (United States)

Brewer, Cynthia A

2006-02-01

Maps and other data graphics may play a role in generating ideas and hypotheses at the beginning of a project. They are useful as part of analyses for evaluating model results and then at the end of a project when researchers present their results and conclusions to varied audiences, such as their local research group, decision makers, or a concerned public. Cancer researchers are gaining skill with geographic information system (GIS) mapping as one of their many tools and are broadening the symbolization approaches they use for investigating and illustrating their data. A single map is one of many possible representations of the data, so making multiple maps is often part of a complete mapping effort. Symbol types, color choices, and data classing each affect the information revealed by a map and are best tailored to the specific characteristics of data. Related data can be examined in series with coordinated classing and can also be compared using multivariate symbols that build on the basic rules of symbol design. Informative legend wording and setting suitable map projections are also basic to skilled mapmaking.

Advancing Geographic Information Science—Proposal to NSF, with Addendum

OpenAIRE

National Center for Geographic Information and Analysis

1995-01-01

This document from 1995 and the addendum from 1996 represent NCGIA's proposal for Varenius—a program of research initiatives to advance geographic information science in the context of digitial worlds and the information society.

Geography and Geographical Information Science: Interdisciplinary Integrators

Science.gov (United States)

Ellul, Claire

2015-01-01

To understand how Geography and Geographical Information Science (GIS) can contribute to Interdisciplinary Research (IDR), it is relevant to articulate the differences between the different types of such research. "Multidisciplinary" researchers work in a "parallel play" mode, completing work in their disciplinary work streams…

Virtual building environments (VBE) - Applying information modeling to buildings

Energy Technology Data Exchange (ETDEWEB)

Bazjanac, Vladimir

2004-06-21

A Virtual Building Environment (VBE) is a ''place'' where building industry project staffs can get help in creating Building Information Models (BIM) and in the use of virtual buildings. It consists of a group of industry software that is operated by industry experts who are also experts in the use of that software. The purpose of a VBE is to facilitate expert use of appropriate software applications in conjunction with each other to efficiently support multidisciplinary work. This paper defines BIM and virtual buildings, and describes VBE objectives, set-up and characteristics of operation. It informs about the VBE Initiative and the benefits from a couple of early VBE projects.

Fuzzy modeling with spatial information for geographic problems

CERN Document Server

Petry, Frederick E; Cobb, Maria A

2005-01-01

The capabilities of modern technology are rapidly increasing, spurred on to a large extent by the tremendous advances in communications and computing. Automated vehicles and global wireless connections are some examples of these advances. In order to take advantage of such enhanced capabilities, our need to model and manipulate our knowledge of the geophysical world, using compatible representations, is also rapidly increasing. In response to this one fundamental issue of great concern in modern geographical research is how to most effectively capture the physical world around us in systems like geographical information systems (GIS). Making this task even more challenging is the fact that uncertainty plays a pervasive role in the representation, analysis and use of geospatial information. The types of uncertainty that appear in geospatial information systems are not the just simple randomness of observation, as in weather data, but are manifested in many other forms including imprecision, incompleteness and ...

Principles of logic and the use of digital geographic information systems

Science.gov (United States)

Robinove, Charles Joseph

1986-01-01

Digital geographic information systems allow many different types of data to be spatially and statistically analyzed. Logical operations can be performed on individual or multiple data planes by algorithms that can be implemented in computer systems. Users and creators of the systems should fully understand these operations. This paper describes the relationships of layers and features in geographic data bases and the principles of logic that can be applied by geographic information systems and suggests that a thorough knowledge of the data that are entered into a geographic data base and of the logical operations will produce results that are most satisfactory to the user. Methods of spatial analysis are reduced to their primitive logical operations and explained to further such understanding.

Geographic Knowledge Extraction and Semantic Similarity in OpenStreetMap

OpenAIRE

Ballatore, Andrea; Bertolotto, Michela; Wilson, David C.

2012-01-01

In recent years, a web phenomenon known as Volunteered Geographic Information (VGI) has produced large crowdsourced geographic data sets. OpenStreetMap (OSM), the leading VGI project, aims at building an open-content world map through user contributions. OSM semantics consists of a set of properties (called 'tags') describing geographic classes, whose usage is defined by project contributors on a dedicated Wiki website. Because of its simple and open semantic structure, the OSM approach often...

Key Techniques for Dynamic Updating of National Fundamental Geographic Information Database

Directory of Open Access Journals (Sweden)

WANG Donghua

2015-07-01

Full Text Available One of the most important missions of fundamental surveying and mapping work is to keep the fundamental geographic information fresh. In this respect, National Administration of Surveying, Mapping and Geoinformation has launched the project of dynamic updating of national fundamental geographic information database since 2012, which aims to update 1:50 000, 1:250 000 and 1:1 000 000 national fundamental geographic information database continuously and quickly, by updating and publishing once a year. This paper introduces the general technical thinking of dynamic updating, states main technical methods, such as dynamic updating of fundamental database, linkage updating of derived databases, and multi-tense database management and service and so on, and finally introduces main technical characteristics and engineering applications.

The New Trends for Librarians in Management of Geographic Information

OpenAIRE

Vardakosta, Ifigenia; Kapidakis, Sarantos

2013-01-01

The purpose of this study is to examine the tools (e.g. CSDGM – FGDC, Gazetteers) used for the subject description and organization, of materials (maps, aerial photos, geospatial data, remote sense images etc) related to the geographic information in today's hybrid library environment. Furthermore we aim to identify changes (e.g. RDA) and determine the new forms (e.g. Linked Data) that have arisen in the management and use of geographic information in order to further enrich access to digital...

Social Media-Related Geographic Information in the Context of Strategic Environmental Assessment of Municipal Masterplans: A Case Study Concerning Sardinia (Italy

Directory of Open Access Journals (Sweden)

Roberta Floris

2015-08-01

Full Text Available This paper proposes a discussion concerning the use of social media-related geographic information in the context of the strategic environmental assessment (SEA of Sardinian Municipal masterplans (MMPs. We show that this kind of information improves, substantially, the SEA process since it provides planners, evaluators, and the local communities with information retrieved from social media that would have not been available otherwise. This information integrates authoritative data collection, which comes from official sources, and enlightens tastes and preferences of the users of services and infrastructure, and their expectations concerning their spatial organization. A methodological approach related to the collection of social media-related geographic information is implemented and discussed with reference to the urban context of the city of Cagliari (Sardinia, Italy. The results are very effective in terms of provision of information, which may possibly increase the spatial knowledge available for planning policy definition and implementation. In this perspective, this kind of information discloses opportunities for building analytical scenarios related to urban and regional planning and it offers useful suggestions for sustainable development based on tourism strategies.

Conceptual Model of Dynamic Geographic Environment

Directory of Open Access Journals (Sweden)

Martínez-Rosales Miguel Alejandro

2014-04-01

Full Text Available In geographic environments, there are many and different types of geographic entities such as automobiles, trees, persons, buildings, storms, hurricanes, etc. These entities can be classified into two groups: geographic objects and geographic phenomena. By its nature, a geographic environment is dynamic, thus, it’s static modeling is not sufficient. Considering the dynamics of geographic environment, a new type of geographic entity called event is introduced. The primary target is a modeling of geographic environment as an event sequence, because in this case the semantic relations are much richer than in the case of static modeling. In this work, the conceptualization of this model is proposed. It is based on the idea to process each entity apart instead of processing the environment as a whole. After that, the so called history of each entity and its spatial relations to other entities are defined to describe the whole environment. The main goal is to model systems at a conceptual level that make use of spatial and temporal information, so that later it can serve as the semantic engine for such systems.

REMOTE SENSING IMAGE CLASSIFICATION APPLIED TO THE FIRST NATIONAL GEOGRAPHICAL INFORMATION CENSUS OF CHINA

Directory of Open Access Journals (Sweden)

X. Yu

2016-06-01

Full Text Available Image classification will still be a long way in the future, although it has gone almost half a century. In fact, researchers have gained many fruits in the image classification domain, but there is still a long distance between theory and practice. However, some new methods in the artificial intelligence domain will be absorbed into the image classification domain and draw on the strength of each to offset the weakness of the other, which will open up a new prospect. Usually, networks play the role of a high-level language, as is seen in Artificial Intelligence and statistics, because networks are used to build complex model from simple components. These years, Bayesian Networks, one of probabilistic networks, are a powerful data mining technique for handling uncertainty in complex domains. In this paper, we apply Tree Augmented Naive Bayesian Networks (TAN to texture classification of High-resolution remote sensing images and put up a new method to construct the network topology structure in terms of training accuracy based on the training samples. Since 2013, China government has started the first national geographical information census project, which mainly interprets geographical information based on high-resolution remote sensing images. Therefore, this paper tries to apply Bayesian network to remote sensing image classification, in order to improve image interpretation in the first national geographical information census project. In the experiment, we choose some remote sensing images in Beijing. Experimental results demonstrate TAN outperform than Naive Bayesian Classifier (NBC and Maximum Likelihood Classification Method (MLC in the overall classification accuracy. In addition, the proposed method can reduce the workload of field workers and improve the work efficiency. Although it is time consuming, it will be an attractive and effective method for assisting office operation of image interpretation.

Geographic Names Information System (GNIS) - USGS National Map Downloadable Data Collection

Data.gov (United States)

U.S. Geological Survey, Department of the Interior — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

The Potential of Volunteered Geographic Information (VGI in Future Transport Systems

Directory of Open Access Journals (Sweden)

Maria Attard

2016-11-01

Full Text Available As transport systems are pushed to the limits in many cities, governments have tried to resolve problems of traffic and congestion by increasing capacity. Miller (2013 contends the need to identify new capabilities (instead of capacity of the transport infrastructure in order to increase efficiency without extending the physical infrastructure. Kenyon and Lyons (2003 identified integrated traveller information as a facilitator for better transport decisions. Today, with further developments in the use of geographic information systems (GIS and a greater disposition by the public to provide volunteered geographic information (VGI, the potential of information is not only integrated across modes but also user-generated, real-time and available on smartphones anywhere. This geographic information plays today an important role in sectors such as politics, businesses and entertainment, and presumably this would extend to transport in revealing people’s preferences for mobility and therefore be useful for decision-making. The widespread availability of networks and smartphones offer new opportunities supported by apps and crowdsourcing through social media such as the successful traffic and navigation app Waze, car sharing programmes such as Zipcar, and ride sharing systems such as Uber. This study aims to develop insights into the potential of governments to use voluntary (crowdsourced geographic information effectively to achieve sustainable mobility. A review of the literature and existing technology informs this article. Further research into this area is identified and presented at the end of the paper.

Brand Coopetition with Geographical Indications: Which Information Does Lead to Brand Differentiation?

NARCIS (Netherlands)

Dentoni, D.; Tonsor, G.; Calantone, R.; Peterson, C.

2013-01-01

Farmers and managers marketing food products with Geographical Indications (GIs) have to play a brand coopetition game: they cooperate with each other to develop a collective GI equity, yet they compete to build their individual brand and to establish market channels. Based on an online experiment

Groundwater quality mapping using geographic information system ...

African Journals Online (AJOL)

Spatial variations in ground water quality in the corporation area of Gulbarga City located in the northern part of Karnataka State, India, have been studied using geographic information system (GIS) technique. GIS, a tool which is used for storing, analyzing and displaying spatial data is also used for investigating ground ...

VT Locations of State of Vermont Buildings

Data.gov (United States)

Vermont Center for Geographic Information — (Link to Metadata) This data layer contains the locations of buildings/facilities owned and/or leased by the State of Vermont. Data was obtained from Buildings and...

Towards mapping land use patterns from volunteered geographic information

NARCIS (Netherlands)

Jokar Arsanjani, J.; Helbich, M.|info:eu-repo/dai/nl/370530349; Bakillah, M.; Hagenauer, J.; Zipf, A.

2013-01-01

A large number of applications have been launched to gather geo-located information from the public. This article introduces an approach toward generating land-use patterns from volunteered geographic information (VGI) without applying remote-sensing techniques and/or engaging official data. Hence,

Community structure informs species geographic distributions

KAUST Repository

Montesinos-Navarro, Alicia

2018-05-23

Understanding what determines species\\' geographic distributions is crucial for assessing global change threats to biodiversity. Measuring limits on distributions is usually, and necessarily, done with data at large geographic extents and coarse spatial resolution. However, survival of individuals is determined by processes that happen at small spatial scales. The relative abundance of coexisting species (i.e. \\'community structure\\') reflects assembly processes occurring at small scales, and are often available for relatively extensive areas, so could be useful for explaining species distributions. We demonstrate that Bayesian Network Inference (BNI) can overcome several challenges to including community structure into studies of species distributions, despite having been little used to date. We hypothesized that the relative abundance of coexisting species can improve predictions of species distributions. In 1570 assemblages of 68 Mediterranean woody plant species we used BNI to incorporate community structure into Species Distribution Models (SDMs), alongside environmental information. Information on species associations improved SDM predictions of community structure and species distributions moderately, though for some habitat specialists the deviance explained increased by up to 15%. We demonstrate that most species associations (95%) were positive and occurred between species with ecologically similar traits. This suggests that SDM improvement could be because species co-occurrences are a proxy for local ecological processes. Our study shows that Bayesian Networks, when interpreted carefully, can be used to include local conditions into measurements of species\\' large-scale distributions, and this information can improve the predictions of species distributions.

Semi-automatic building extraction in informal settlements from high-resolution satellite imagery

Science.gov (United States)

Mayunga, Selassie David

The extraction of man-made features from digital remotely sensed images is considered as an important step underpinning management of human settlements in any country. Man-made features and buildings in particular are required for varieties of applications such as urban planning, creation of geographical information systems (GIS) databases and Urban City models. The traditional man-made feature extraction methods are very expensive in terms of equipment, labour intensive, need well-trained personnel and cannot cope with changing environments, particularly in dense urban settlement areas. This research presents an approach for extracting buildings in dense informal settlement areas using high-resolution satellite imagery. The proposed system uses a novel strategy of extracting building by measuring a single point at the approximate centre of the building. The fine measurement of the building outlines is then effected using a modified snake model. The original snake model on which this framework is based, incorporates an external constraint energy term which is tailored to preserving the convergence properties of the snake model; its use to unstructured objects will negatively affect their actual shapes. The external constrained energy term was removed from the original snake model formulation, thereby, giving ability to cope with high variability of building shapes in informal settlement areas. The proposed building extraction system was tested on two areas, which have different situations. The first area was Tungi in Dar Es Salaam, Tanzania where three sites were tested. This area is characterized by informal settlements, which are illegally formulated within the city boundaries. The second area was Oromocto in New Brunswick, Canada where two sites were tested. Oromocto area is mostly flat and the buildings are constructed using similar materials. Qualitative and quantitative measures were employed to evaluate the accuracy of the results as well as the performance

Geographic Information Systems: A Primer

Science.gov (United States)

1990-10-01

Albert Bargeski Page Building 1 2001 Wisconsin Ave., N.W. Washington, DC 20235 (202) 673-5594 DATA: Physical Biological Chemical National Technical...Information Systems Proceedings. ’an Francisco, CA, Oct. 26-30. ASPRS and ACSM. Vol. 1. pp. 1’ - 147. John, N. 1982. Megatrends - Ten New Directions

The research on data organization technology in the highway geographic information system

Science.gov (United States)

Tian, Zhihui; Wu, Fang; Zeng, Yuhuai

2008-10-01

Data are the basis of GIS. It has direct impact on the efficiency and function of a Highway Geographic Information System (HGIS), because of the characteristics of data model and data organization of the traffic geographic information system such as spatial property, multi-path network, linearity. This paper discussed the data property of HGIS, studied and presented the HGIS spatial data on multi-source and model. Also, it described and verified highway geographical feature of special subject data's linearity, dynamic and multiple-path network property in HGIS.

Crime Mapping and Geographical Information Systems in Crime Analysis

OpenAIRE

Dağlar, Murat; Argun, Uğur

2016-01-01

As essential apparatus in crime analysis, crime mapping and Geographical Information Systems (GIS) are being progressively more accepted by police agencies. Development in technology and the accessibility of geographic data sources make it feasible for police departments to use GIS and crime mapping. GIS and crime mapping can be utilized as devices to discover reasons contributing to crime, and hence let law enforcement agencies proactively take action against the crime problems before they b...

Design Research of TIANDITU (Map Worl)-Based Geographic Information System for Travelling Service

Science.gov (United States)

Zhang, J.; Zhang, H.; Wang, C.

2014-04-01

TIANDITU (Map World) is the public version of the National Platform for Common Geospatial Information Service, and the travelling channel is TIANDITU-based geographic information platform for travelling service. With the development of tourism, traditional ways for providing travelling information cannot meet the needs of travelers. As such, the travelling channel of TIANDITU focuses on providing travel information abundantly and precisely, which integrated the geographic information data of TIANDITU Version 2.0 and the authoritative information resources from China National Tourism Administration. Furthermore, spatial positioning, category and information query of various travelling information were offered for the public in the travelling channel. This research mainly involves three important parts: the system design, key technologies of the system design and application examples. Firstly, this paper introduced the design of TIANDITU-based geographic information system for travelling service, and the general and database design were described in detail. The designs for general, database and travelling service above should consider lots of factors which illustrated in the paper in order to guarantee the efficient service. The process of system construction, the content of geographic information for travelling and system functions of geographic information for travelling are also proposed via diagram in this part. Then several key technologies were discussed, including the travelling information integration for main node and among nodes, general architecture design and management system for travelling channel, web portals and system interface. From the perspective of main technologies, this part describes how TIANDITU travelling channel can realize various functions and reach the requirements from different users. Finally, three application examples about travelling information query were listed shortly. The functions and search results are shown clearly in this

Building information modelling (BIM)

CSIR Research Space (South Africa)

Conradie, Dirk CU

2009-02-01

Full Text Available The concept of a Building Information Model (BIM) also known as a Building Product Model (BPM) is nothing new. A short article on BIM will never cover the entire filed, because it is a particularly complex filed that is recently beginning to receive...

Using geographic information system (GIS) to determine waste ...

African Journals Online (AJOL)

lyndon

could be used as waste transfer stations in relation to location of landfill sites using Geographic. Information ... Coast, bounded to the east by the Ga East Municipal Assembly, to the west by the .... Solid Waste and the Hierarchy in Solid Waste.

The application of geographic information systems (GIS) in the ...

African Journals Online (AJOL)

A large amount of data is usually generated during environmental monitoring programmes. The data need to be transformed into useful information that can be used for interpretation and analysis of problems. This paper outlines the feasibility of using geographic information system (GIS) techniques in the analysis of ...

Preliminary Study on Secure Intranet Geographical Information System

International Nuclear Information System (INIS)

Kim, Hyun Tae; Park, Jee Won; Ko Han Suk

2005-01-01

A Geographical Information System (GIS) is usually defined as an information system for capturing, checking, storing, retrieving, manipulating, analyzing, and displaying spatial and relevant non-spatial data. Here 'spatial' means 'geo-referenced to the earth'. It is estimated that about 80% of the data used in business and government are of spatial type. The georeferenced information on sensitive location is usually protected as the highest level of confidentiality by the most information system. This paper discusses a commercial satellite imagery based secure Intranet GIS which runs the Microsoft .NET technology

77 FR 69899 - Public Conference on Geographic Information Systems (GIS) in Transportation Safety

Science.gov (United States)

2012-11-21

... NATIONAL TRANSPORTATION SAFETY BOARD Public Conference on Geographic Information Systems (GIS) in... Geographic Information Systems (GIS) in transportation safety on December 4-5, 2012. GIS is a rapidly... visualization of data. The meeting will bring researchers and practitioners in transportation safety and GIS...

Quality Inspection and Analysis of Three-Dimensional Geographic Information Model Based on Oblique Photogrammetry

Science.gov (United States)

Dong, S.; Yan, Q.; Xu, Y.; Bai, J.

2018-04-01

In order to promote the construction of digital geo-spatial framework in China and accelerate the construction of informatization mapping system, three-dimensional geographic information model emerged. The three-dimensional geographic information model based on oblique photogrammetry technology has higher accuracy, shorter period and lower cost than traditional methods, and can more directly reflect the elevation, position and appearance of the features. At this stage, the technology of producing three-dimensional geographic information models based on oblique photogrammetry technology is rapidly developing. The market demand and model results have been emerged in a large amount, and the related quality inspection needs are also getting larger and larger. Through the study of relevant literature, it is found that there are a lot of researches on the basic principles and technical characteristics of this technology, and relatively few studies on quality inspection and analysis. On the basis of summarizing the basic principle and technical characteristics of oblique photogrammetry technology, this paper introduces the inspection contents and inspection methods of three-dimensional geographic information model based on oblique photogrammetry technology. Combined with the actual inspection work, this paper summarizes the quality problems of three-dimensional geographic information model based on oblique photogrammetry technology, analyzes the causes of the problems and puts forward the quality control measures. It provides technical guidance for the quality inspection of three-dimensional geographic information model data products based on oblique photogrammetry technology in China and provides technical support for the vigorous development of three-dimensional geographic information model based on oblique photogrammetry technology.

QUALITY INSPECTION AND ANALYSIS OF THREE-DIMENSIONAL GEOGRAPHIC INFORMATION MODEL BASED ON OBLIQUE PHOTOGRAMMETRY

Directory of Open Access Journals (Sweden)

S. Dong

2018-04-01

Full Text Available In order to promote the construction of digital geo-spatial framework in China and accelerate the construction of informatization mapping system, three-dimensional geographic information model emerged. The three-dimensional geographic information model based on oblique photogrammetry technology has higher accuracy, shorter period and lower cost than traditional methods, and can more directly reflect the elevation, position and appearance of the features. At this stage, the technology of producing three-dimensional geographic information models based on oblique photogrammetry technology is rapidly developing. The market demand and model results have been emerged in a large amount, and the related quality inspection needs are also getting larger and larger. Through the study of relevant literature, it is found that there are a lot of researches on the basic principles and technical characteristics of this technology, and relatively few studies on quality inspection and analysis. On the basis of summarizing the basic principle and technical characteristics of oblique photogrammetry technology, this paper introduces the inspection contents and inspection methods of three-dimensional geographic information model based on oblique photogrammetry technology. Combined with the actual inspection work, this paper summarizes the quality problems of three-dimensional geographic information model based on oblique photogrammetry technology, analyzes the causes of the problems and puts forward the quality control measures. It provides technical guidance for the quality inspection of three-dimensional geographic information model data products based on oblique photogrammetry technology in China and provides technical support for the vigorous development of three-dimensional geographic information model based on oblique photogrammetry technology.

Land-use mapping for the State of Kuwait using the Geographical Information System (Gigs)

International Nuclear Information System (INIS)

Omar, S.A.S.; Misak, R.; Minkarah, H.; King, P.; Kwarting, A.; Abo-Rizq, H.; Roy, W.

2001-01-01

A land-use survey was undertaken at a scale 1:100000 for the State of Kuwait. Land use is classified into 19 map units based on field survey and interpretation of Landsat imagery. The latest topographic map coverage for the State of Kuwait was used as a base map. The Geographic Information System (GIS) was used for the storage, analysis and presentation of spatial data. Summary statistics of total areas of each map unit are presented in nine 1:100.000map sheets and percentage areas of different land uses were identified. Land use is dominated by rangeland (75.12%) which is used primarily for grazing activities, and also recreational activities such as spring camping and hunting. Oil fields (7%) include areas of existing development of wells and associated infrastructure. Water reservoir areas represent the surficial extent of aquifers and natural water fields. Military areas (4%) are scattered throughout the country. Other significant land uses include the build-up areas of Kuwait city (3.5%), quarries, borrow pits and dumps of building debris, communication facilities, cemeteries, parkland, encampments, power stations, race tracks and unused land (7%). Land use information can be used as the basis for future land use planning applications. (author)

Geographic information system for pigweed distribution in the US Southeast

Science.gov (United States)

In the southeastern United States, pigweeds have become troublesome weeds in agricultural systems. To implement management strategies to control them, agriculturalists need information on areas affected by pigweeds. Geographic information systems (GIS) afford users the ability to evaluate agricult...

GeoCREV: veterinary geographical information system and the development of a practical sub-national spatial data infrastructure

Directory of Open Access Journals (Sweden)

Nicola Ferrè

2011-05-01

Full Text Available This paper illustrates and discusses the key issues of the geographical information system (GIS developed by the Unit of Veterinary Epidemiology of the Veneto region (CREV, defined according to user needs, spatial data (availability, accessibility and applicability, development, technical aspects, inter-institutional relationships, constraints and policies. GeoCREV, the support system for decision-making, was designed to integrate geographic information and veterinary laboratory data with the main aim to develop a sub-national, spatial data infrastructure (SDI for the veterinary services of the Veneto region in north-eastern Italy. Its implementation required (i collection of data and information; (ii building a geodatabase; and (iii development of a WebGIS application. Tools for the management, collection, validation and dissemination of the results (public access and limited access were developed. The modular concept facilitates the updating and development of the system according to user needs and data availability. The GIS management practices that were followed to develop the system are outlined, followed by a detailed discussion of the key elements of the GIS implementation process (data model, technical aspects, inter-institutional relationship, user dimension and institutional framework. Problems encountered in organising the non-spatial data and the future work directions are also described.

GeoCREV: veterinary geographical information system and the development of a practical sub-national spatial data infrastructure.

Science.gov (United States)

Ferrè, Nicola; Mulatti, Paolo; Mazzucato, Matteo; Lorenzetto, Monica; Trolese, Matteo; Pandolfo, Dario; Vio, Piero; Sitta, Guido; Marangon, Stefano

2011-05-01

This paper illustrates and discusses the key issues of the geographical information system (GIS) developed by the Unit of Veterinary Epidemiology of the Veneto region (CREV), defined according to user needs, spatial data (availability, accessibility and applicability), development, technical aspects, inter-institutional relationships, constraints and policies. GeoCREV, the support system for decision-making, was designed to integrate geographic information and veterinary laboratory data with the main aim to develop a sub-national, spatial data infrastructure (SDI) for the veterinary services of the Veneto region in north-eastern Italy. Its implementation required (i) collection of data and information; (ii) building a geodatabase; and (iii) development of a WebGIS application. Tools for the management, collection, validation and dissemination of the results (public access and limited access) were developed. The modular concept facilitates the updating and development of the system according to user needs and data availability. The GIS management practices that were followed to develop the system are outlined, followed by a detailed discussion of the key elements of the GIS implementation process (data model, technical aspects, inter-institutional relationship, user dimension and institutional framework). Problems encountered in organising the non-spatial data and the future work directions are also described.

Social Media Geographic Information: Recent Findings and Opportunities for Smart Spatial Planning

Directory of Open Access Journals (Sweden)

Pierangelo Massa

2014-05-01

Full Text Available This paper deals with the opportunities of Social Media Geographic Information (SMGI as valuable support for analysis, design and decision-making in urban and regional planning. In the light of the recent advances in digital geographic information, such as Spatial Data Infrastructures (SDI and Volunteered Geographic Information (VGI which are fostering innovation in urban and regional planning, the authors focus on the potentialities of Social Media as source of knowledge for the planning practices. The authors argue SMGI may play an important role to inform 'smart city' strategies extending authoritative and sensor data infrastructure with experiential and pluralist citizens knowledge. To support this thesis, an innovative methodology for the advance of Social Media Geographic Information (SMGI Analytics is proposed. To this end, the authors present an original user-friendly tool able to extract information from popular Social Media such as Twitter.com and Youtube.com and to apply Spatial-Temporal Textual (STTx analysis . Some examples are provided at the regional and at the local scale in order to demonstrate the potential of SMGI analytics in regional and urban planning. The results show how SMGI analytics can support design, analysis and decision making in planning, and add the value of pluralism to inform smart city initiatives. The paper ends with some brief conclusions on the opportunities of SMGI analytics for possibly affecting decision-making dynamics and urban and regional planning processes, through citizens’ dialogue and integration of experiential and professional knowledge.

Case studies in geographic information systems for environmental streamlining

Science.gov (United States)

2012-05-31

This 2012 summary report addresses the current use of geographic information systems (GIS) and related technologies by State Departments of Transportation (DOTs) for environmental streamlining and stewardship, particularly in relation to the National...

Emerging Technologies in the Built Environment: Geographic Information Science (GIS), 3D Printing, and Additive Manufacturing

Energy Technology Data Exchange (ETDEWEB)

New, Joshua Ryan [ORNL

2014-01-01

Abstract 1: Geographic information systems emerged as a computer application in the late 1960s, led in part by projects at ORNL. The concept of a GIS has shifted through time in response to new applications and new technologies, and is now part of a much larger world of geospatial technology. This presentation discusses the relationship of GIS and estimating hourly and seasonal energy consumption profiles in the building sector at spatial scales down to the individual parcel. The method combines annual building energy simulations for city-specific prototypical buildings and commonly available geospatial data in a GIS framework. Abstract 2: This presentation focuses on 3D printing technologies and how they have rapidly evolved over the past couple of years. At a basic level, 3D printing produces physical models quickly and easily from 3D CAD, BIM (Building Information Models), and other digital data. Many AEC firms have adopted 3D printing as part of commercial building design development and project delivery. This presentation includes an overview of 3D printing, discusses its current use in building design, and talks about its future in relation to the HVAC industry. Abstract 3: This presentation discusses additive manufacturing and how it is revolutionizing the design of commercial and residential facilities. Additive manufacturing utilizes a broad range of direct manufacturing technologies, including electron beam melting, ultrasonic, extrusion, and laser metal deposition for rapid prototyping. While there is some overlap with the 3D printing talk, this presentation focuses on the materials aspect of additive manufacturing and also some of the more advanced technologies involved with rapid prototyping. These technologies include design of carbon fiber composites, lightweight metals processing, transient field processing, and more.

Rule-guided human classification of Volunteered Geographic Information

Science.gov (United States)

Ali, Ahmed Loai; Falomir, Zoe; Schmid, Falko; Freksa, Christian

2017-05-01

During the last decade, web technologies and location sensing devices have evolved generating a form of crowdsourcing known as Volunteered Geographic Information (VGI). VGI acted as a platform of spatial data collection, in particular, when a group of public participants are involved in collaborative mapping activities: they work together to collect, share, and use information about geographic features. VGI exploits participants' local knowledge to produce rich data sources. However, the resulting data inherits problematic data classification. In VGI projects, the challenges of data classification are due to the following: (i) data is likely prone to subjective classification, (ii) remote contributions and flexible contribution mechanisms in most projects, and (iii) the uncertainty of spatial data and non-strict definitions of geographic features. These factors lead to various forms of problematic classification: inconsistent, incomplete, and imprecise data classification. This research addresses classification appropriateness. Whether the classification of an entity is appropriate or inappropriate is related to quantitative and/or qualitative observations. Small differences between observations may be not recognizable particularly for non-expert participants. Hence, in this paper, the problem is tackled by developing a rule-guided classification approach. This approach exploits data mining techniques of Association Classification (AC) to extract descriptive (qualitative) rules of specific geographic features. The rules are extracted based on the investigation of qualitative topological relations between target features and their context. Afterwards, the extracted rules are used to develop a recommendation system able to guide participants to the most appropriate classification. The approach proposes two scenarios to guide participants towards enhancing the quality of data classification. An empirical study is conducted to investigate the classification of grass

Advancing Theory? Landscape Archaeology and Geographical Information Systems

Directory of Open Access Journals (Sweden)

Di Hu

2012-05-01

Full Text Available This paper will focus on how Geographical Information Systems (GIS have been applied in Landscape Archaeology from the late 1980s to the present. GIS, a tool for organising and analysing spatial information, has exploded in popularity, but we still lack a systematic overview of how it has contributed to archaeological theory, specifically Landscape Archaeology. This paper will examine whether and how GIS has advanced archaeological theory through a historical review of its application in archaeology.

Investigation Into Informational Compatibility Of Building Information Modelling And Building Performance Analysis Software Solutions

OpenAIRE

Hyun, S.; Marjanovic-Halburd, L.; Raslan, R.

2015-01-01

There are significant opportunities for Building Information Modelling (BIM) to address issues related to sustainable and energy efficient building design. While the potential benefits associated with the integration of BIM and BPA (Building Performance Analysis) have been recognised, its specifications and formats remain in their early infancy and often fail to live up to the promise of seamless interoperability at various stages of design process. This paper conducts a case study to investi...

GIS (Geographic Information Systems) based automatic tool for selection of gas pipeline corridors

Energy Technology Data Exchange (ETDEWEB)

Matos, Denise F.; Menezes, Paulo Cesar P.; Paz, Luciana R.L.; Garcia, Katia C.; Cruz, Cristiane B.; Pires, Silvia H.M.; Damazio, Jorge M.; Medeiros, Alexandre M.

2009-07-01

This paper describes a methodology developed to build total accumulated surfaces in order to better select gas pipelines corridor alternatives. The methodology is based on the minimization of negative impacts and the use of Geographic Information Systems (GIS), allowing an automatic method of construction, evaluation and selection of alternatives, that will contribute to the decision making process. It is important to emphasize that this paper follows the assumptions presented on the research reports of a project sponsored by the Ministry of Mines and Energy (MME) and elaborated at the Electric Power Research Center (CEPEL), called 'Development of a Geographic Information System to Oil and Gas Sectors in Brazil', and also the studies d GTW Project (Gas to Wire). Gas pipelines, as for their linear characteristic, may cross a variety of habitats and settlements, increasing the complexity of their environmental management. Considering this reality, this paper presents a methodology that takes into account different environmental criteria (layers), according to the area impacted. From the synthesis of the criteria it is presented the total accumulated surface. It is showed an example of a hypothetical gas pipeline connection between two points using the total accumulated surface. To select the 'impact scores' of the features, the gas pipeline was considered as a linear feature, but the result is a region, formed by pixels, each pixel with an accumulated impact score lower than some arbitrary measure. This region is called 'corridor', and it is the final result obtained using the proposed methodology. (author)

Exploitation of geographic information system at mapping and modelling of selected soil parameters

International Nuclear Information System (INIS)

Palka, B.; Makovnikova, J.; Siran, M.

2005-01-01

In this presentation authors describe using of computers and geographic information systems (GIS) at effective use of soil fund, rational exploitation and organization of agricultural soil fund on the territory of the Slovak Republic, its monitoring and modelling. Using and creating of some geographically oriented information systems and databases about soils as well as present trends are discussed

A cost-effective Geographic Information Systems for Transportation ...

African Journals Online (AJOL)

A cost-effective Geographic Information Systems for Transportation (GIS-T) application for traffic congestion analyses in the Developing World. ... The PDF file you selected should load here if your Web browser has a PDF reader plug-in installed (for example, a recent version of Adobe Acrobat Reader). If you would like ...

Using geographic information systems

International Nuclear Information System (INIS)

Winsor, R.W.

1997-01-01

A true Geographic Information System (GIS) is a computer mapping system with spatial analysis ability and cartographic accuracy that will offer many different projections. GIS has evolved to become an everyday tool for a wide range of users including oil companies, worldwide. Other systems are designed to allow oil and gas companies to keep their upstream data in the same format. Among these are the Public Petroleum Data Model developed by Gulf Canada, Digitech and Applied Terravision Systems of Calgary, the system developed and marketed by the Petrotechnical Open Software Corporation in the United States, and the Mercury projects by IBM. These have been developed in an effort to define an industry standard. The advantages and disadvantages of open and closed systems were discussed. Factors to consider when choosing a GIS system such as overall performance, area of use and query complexity, were reviewed. 3 figs

Solar energy in buildings solved by building information modeling

Science.gov (United States)

Chudikova, B.; Faltejsek, M.

2018-03-01

Building lead us to use renewable energy sources for all types of buildings. The use of solar energy is the alternatives that can be applied in a good ratio of space, price, and resultant benefits. Building Information Modelling is a modern and effective way of dealing with buildings with regard to all aspects of the life cycle. The basis is careful planning and simulation in the pre-investment phase, where it is possible to determine the effective result and influence the lifetime of the building and the cost of its operation. By simulating, analysing and insert a building model into its future environment where climate conditions and surrounding buildings play a role, it is possible to predict the usability of the solar energy and establish an ideal model. Solar systems also very affect the internal layout of buildings. Pre-investment phase analysis, with a view to future aspects, will ensure that the resulting building will be both low-energy and environmentally friendly.

Geographic Information/GIS Institutionalization in the 50 States: Users and Coordinators (95-11)

OpenAIRE

Warnecke, Lisa

1995-01-01

This report analyzes recent information about the use and institutionalization of geographic information and related technologies such as geographic information systems (GIS), satellite imagery and the global positioning system (GI/GIS) in the 50 state governments. The devolution of federal responsibilities and activism by state governments are increasing the role of states in GI/GIS, as well as in the nation's governance in general.  An organizational chart for each state was prepar...

How to use Building Information Systems for a transition towards Sustainable Building Operation

NARCIS (Netherlands)

Itard, L.C.M.; Joosstens, F; Heiselberg, Per Kvols

2016-01-01

BIM Building Information Model or Modelling connects many different information
systems from various actors during the building construction process with each
other in one easily accessible and understandable model. BIM assures an effective
and efficient building construction process by

Development of Geographic Information Systems and their use in National Libraries of Russia

Directory of Open Access Journals (Sweden)

Natalya Kotelnikova

2005-04-01

Full Text Available By the end of the 20th century cartography has amassed a vast array of information on major aspects of existence, interaction and the functioning of nature and society owing to vigorous automation and computerisation. These are applied for the purpose of creating geographic information systems (GIS. The main function of geographic information systems is the storage and use of computer (electronic maps and atlases. Geographic information systems differ from each other in their territorial levels (global, national, regional, municipal and others and by their subjects (land, cadastre, ecological, sea and other maps. The geographic information system, ‘Black Sea’ is cited as an example. This is an information-based project compiled with a view to taking decisions on the protection of the resources of the basin of the Black Sea. The Black Sea GIS was developed for use by governments, scientists, the general public, NGOs and the media for the following purposes: · planning for marine environment activities and impacts on a regional scale; · public awareness through training, education, workshops, lectures and media; · scientific analysis, modelling, ecological impact assessment, science planning. The main GIS components are designed to perform the following functions: · data input; · data storage and database management; · data analysis and processing; · interaction with the user (graphical/map editing; and · data output and presentation (plotting.

Optimizing Energy Consumption in Building Designs Using Building Information Model (BIM

Directory of Open Access Journals (Sweden)

Egwunatum Samuel

2016-09-01

Full Text Available Given the ability of a Building Information Model (BIM to serve as a multi-disciplinary data repository, this paper seeks to explore and exploit the sustainability value of Building Information Modelling/models in delivering buildings that require less energy for their operation, emit less CO2 and at the same time provide a comfortable living environment for their occupants. This objective was achieved by a critical and extensive review of the literature covering: (1 building energy consumption, (2 building energy performance and analysis, and (3 building information modeling and energy assessment. The literature cited in this paper showed that linking an energy analysis tool with a BIM model helped project design teams to predict and create optimized energy consumption. To validate this finding, an in-depth analysis was carried out on a completed BIM integrated construction project using the Arboleda Project in the Dominican Republic. The findings showed that the BIM-based energy analysis helped the design team achieve the world’s first 103% positive energy building. From the research findings, the paper concludes that linking an energy analysis tool with a BIM model helps to expedite the energy analysis process, provide more detailed and accurate results as well as deliver energy-efficient buildings. The study further recommends that the adoption of a level 2 BIM and the integration of BIM in energy optimization analyse should be made compulsory for all projects irrespective of the method of procurement (government-funded or otherwise or its size.

Geographical information system for radon gas from soil measurement

International Nuclear Information System (INIS)

Orlando, P.; Amici, M.; Altieri, A.; Massari, P.; Miccadei, E.; Onofri, A.; Orlando, C.; Paolelli, C.; Paron, P.; Perticaroli, P.; Piacentini, T.; Silvestri, C.; Minach, L.; Verdi, L.; Bertolo, A.; Trotti, F.

2000-03-01

The working program foresees the realization of an geographical information system for the check in field of the geological parameters and determination of uranium and radium contents in various type of rocks. It is here also pointed out a measuring method for radon concentration in soil [it

OGC Geographic Information Service Deductive Semantic Reasoning Based on Description Vocabularies Reduction

Directory of Open Access Journals (Sweden)

MIAO Lizhi

2015-09-01

Full Text Available As geographic information interoperability and sharing developing, more and more interoperable OGC (open geospatial consortium Web services (OWS are generated and published through the internet. These services can facilitate the integration of different scientific applications by searching, finding, and utilizing the large number of scientific data and Web services. However, these services are widely dispersed and hard to be found and utilized with executive semantic retrieval. This is especially true when considering the weak semantic description of geographic information service data. Focusing on semantic retrieval and reasoning of the distributed OWS resources, a deductive and semantic reasoning method is proposed to describe and search relevant OWS resources. Specifically, ①description words are extracted from OWS metadata file to generate GISe ontology-database and instance-database based on geographic ontology according to basic geographic elements category, ②a description words reduction model is put forward to implement knowledge reduction on GISe instance-database based on rough set theory and generate optimized instances database, ③utilizing GISe ontology-database and optimized instance-database to implement semantic inference and reasoning of geographic searching objects is used as an example to demonstrate the efficiency, feasibility and recall ration of the proposed description-word-based reduction model.

VT Building Density - from E911 ESITE

Data.gov (United States)

Vermont Center for Geographic Information — (Link to Metadata) The FacilitiesBuildings_DENSITY data set depicts density for defined types of structures in Vermont. The vector source used to generate the...

An application of Geographic Information System in mapping flood ...

African Journals Online (AJOL)

Roland

1Department of Geography, Benue State University, Makurdi, Benue State, Nigeria. 2National Agency for the Control of AIDS (NACA), Central Area, Abuja, Nigeria. Accepted 20 May, 2013. This study deals with the application of Geographic Information Systems (GIS) in mapping flood risk zones in Makurdi Town. This study ...

Not just pretty pictures: Geographical Information Systems in TB ...

African Journals Online (AJOL)

Geographical Information Systems (GIS) is becoming a useful tool in disease control by health planners. However little is known about its potential in tuberculosis (TB) control. In 2000 the National TB Programme (NTP) in Malawi assessed its usefulness. Routinely collected case-finding data from the 3 previous years (1997 ...

Geographic Information Systems In Strategic Decision Making In Logistics Companies

Directory of Open Access Journals (Sweden)

Dr. Filiz Gürder

2013-07-01

Geographic information systems can make important contributions to logistic companies in the following areas: Routing, Optimization and Scheduling, Asset Tracking, Dispatching/Mobile, Territory Optimization and Planning, Site Selection and Optimization, Supply Chain Management, and Selecting the Supplier.

Understanding the use of geographical information systems (GIS) in health informatics research: A review.

Science.gov (United States)

Shaw, Nicola; McGuire, Suzanne

2017-06-23

The purpose of this literature review is to understand geographical information systems (GIS) and how they can be applied to public health informatics, medical informatics, and epidemiology. Relevant papers that reflected the use of geographical information systems (GIS) in health research were identified from four academic databases: Academic Search Complete, BioMed Central, PubMed Central, and Scholars Portal, as well as Google Scholar. The search strategy used was to identify articles with "geographic information systems", "GIS", "public health", "medical informatics", "epidemiology", and "health geography" as main subject headings or text words in titles and abstracts. Papers published between 1997 and 2014 were considered and a total of 39 articles were included to inform the authors on the use of GIS technologies in health informatics research. The main applications of GIS in health informatics and epidemiology include disease surveillance, health risk analysis, health access and planning, and community health profiling. GIS technologies can significantly improve quality and efficiency in health research as substantial connections can be made between a population's health and their geographical location. Gains in health informatics can be made when GIS are applied through research, however, improvements need to occur in the quantity and quality of data input for these systems to ensure better geographical health maps are used so that proper conclusions between public health and environmental factors may be made.

The new geographic information system in ETVA VI.PE.

Science.gov (United States)

Xagoraris, Zafiris; Soulis, George

2016-08-01

ETVA VI.PE. S.A. is a member of the Piraeus Bank Group of Companies and its activities include designing, developing, exploiting and managing Industrial Areas throughout Greece. Inside ETVA VI.PE.'s thirty-one Industrial Parks there are currently 2,500 manufacturing companies established, with 40,000 employees and € 2.5 billion of invested funds. In each one of the industrial areas ETVA VI.PE guarantees the companies industrial lots of land (sites) with propitious building codes and complete infrastructure networks of water supply, sewerage, paved roads, power supply, communications, cleansing services, etc. The development of Geographical Information System for ETVA VI.PE.'s Industrial Parks started at the beginning of 1992 and consists of three subsystems: Cadastre, that manages the information for the land acquisition of Industrial Areas; Street Layout - Sites, that manages the sites sold to manufacturing companies; Networks, that manages the infrastructure networks (roads, water supply, sewerage etc). The mapping of each Industrial Park is made incorporating state-of-the-art photogrammetric, cartographic and surveying methods and techniques. Passing through the phases of initial design (hybrid GIS) and system upgrade (integrated Gis solution with spatial database), the system is currently operating on a new upgrade (integrated gIS solution with spatial database) that includes redesigning and merging the system's database schemas, along with the creation of central security policies, and the development of a new web GIS application for advanced data entry, highly customisable and standard reports, and dynamic interactive maps. The new GIS bring the company to advanced levels of productivity and introduce the new era for decision making and business management.

Towards Geographic Information Systems (GIS) Implementation: A Case Study

Science.gov (United States)

Meaney, Miriam

2006-01-01

"Despite its central role in real-world geography, the Geographic Information System (GIS) has had little uptake to date in School Geography." (Wiegand, 2001) This statement can be accurately applied to the author's current school setting and was the focus of her and her colleagues' case study, commenced in 2004 and continued into 2005.…

A RuleML Study on Integrating Geographical and Health Information

DEFF Research Database (Denmark)

Gao, Sheng; Mioc, Darka; Boley, Harold

2008-01-01

To facilitate health surveillance, flexible ways to represent, integrate, and deduce health information become increasingly important. In this paper, an ontology is used to support the semantic definition of spatial, temporal and thematic factors of health information. The ontology is realized...... as an interchangeable RuleML knowledge base, consisting of facts and rules. Rules are also used for integrating geographical and health information. The implemented eHealthGeo system uses the OO jDREW reasoning engine to deduce implicit information such as spatial relationships. The system combines this with spatial...

KBGIS-2: A knowledge-based geographic information system

Science.gov (United States)

Smith, T.; Peuquet, D.; Menon, S.; Agarwal, P.

1986-01-01

The architecture and working of a recently implemented knowledge-based geographic information system (KBGIS-2) that was designed to satisfy several general criteria for the geographic information system are described. The system has four major functions that include query-answering, learning, and editing. The main query finds constrained locations for spatial objects that are describable in a predicate-calculus based spatial objects language. The main search procedures include a family of constraint-satisfaction procedures that use a spatial object knowledge base to search efficiently for complex spatial objects in large, multilayered spatial data bases. These data bases are represented in quadtree form. The search strategy is designed to reduce the computational cost of search in the average case. The learning capabilities of the system include the addition of new locations of complex spatial objects to the knowledge base as queries are answered, and the ability to learn inductively definitions of new spatial objects from examples. The new definitions are added to the knowledge base by the system. The system is currently performing all its designated tasks successfully, although currently implemented on inadequate hardware. Future reports will detail the performance characteristics of the system, and various new extensions are planned in order to enhance the power of KBGIS-2.

Information delivery manuals to integrate building product information into design

DEFF Research Database (Denmark)

Berard, Ole Bengt; Karlshøj, Jan

2011-01-01

Despite continuing BIM progress, professionals in the AEC industry often lack the information they need to perform their work. Although this problem could be alleviated by information systems similar to those in other industries, companies struggle to model processes and information needs...... them in information systems. BIM implies that objects are bearers of information and logic. The present study has three main aims: (1) to explore IDMs capability to capture all four perspectives, (2) to determine whether an IDM’s collaborative methodology is valid for developing standardized processes......, and (3) to ascertain whether IDM’s business rules can support the development of information and logic-bearing BIM objects. The research is based on a case study of re-engineering the bidding process for a design-build project to integrate building product manufacturers, subcontractors...

Geographic Information Systems using CODES linked data (Crash outcome data evaluation system)

Science.gov (United States)

2001-04-01

This report presents information about geographic information systems (GIS) and CODES linked data. Section one provides an overview of a GIS and the benefits of linking to CODES. Section two outlines the basic issues relative to the types of map data...

A review of building information modelling

Science.gov (United States)

Wang, Wen; Han, Rui

2018-05-01

Building Information Modelling (BIM) is widely seen as a catalyst for innovation and productivity. It is becoming standard for new construction and is the most significant technology changing how we design, build, use and manage the building. It is a dominant technological trend in the software industry and although the theoretical groundwork was laid in the previous century, it is a popular topic in academic research. BIM is discussed in this study, which results can provide better and more comprehensive choices for building owners, designers, and developers in future.

The application of geographic information system (GIS) in forensics geoscience

OpenAIRE

McKinley, Jennifer

2017-01-01

Advances in technological developments in Geographic Information Systems (GIS) has enabled the application of GIS in landscape mapping, environmental management, natural hazard risk and disaster management. As geographi- cal information becomes more widely available through satel- lite and aerial imagery, the cost of software decreases and GIS expertise expands, it is most likely that the use of GIS will increase. The methodology has practical applications for police, crime scene investigator...

Geographic Media Literacy

Science.gov (United States)

Lukinbeal, Chris

2014-01-01

While the use of media permeates geographic research and pedagogic practice, the underlying literacies that link geography and media remain uncharted. This article argues that geographic media literacy incorporates visual literacy, information technology literacy, information literacy, and media literacy. Geographic media literacy is the ability…

a Conceptual Framework for Virtual Geographic Environments Knowledge Engineering

Science.gov (United States)

You, Lan; Lin, Hui

2016-06-01

VGE geographic knowledge refers to the abstract and repeatable geo-information which is related to the geo-science problem, geographical phenomena and geographical laws supported by VGE. That includes expert experiences, evolution rule, simulation processes and prediction results in VGE. This paper proposes a conceptual framework for VGE knowledge engineering in order to effectively manage and use geographic knowledge in VGE. Our approach relies on previous well established theories on knowledge engineering and VGE. The main contribution of this report is following: (1) The concepts of VGE knowledge and VGE knowledge engineering which are defined clearly; (2) features about VGE knowledge different with common knowledge; (3) geographic knowledge evolution process that help users rapidly acquire knowledge in VGE; and (4) a conceptual framework for VGE knowledge engineering providing the supporting methodologies system for building an intelligent VGE. This conceptual framework systematically describes the related VGE knowledge theories and key technologies. That will promote the rapid transformation from geodata to geographic knowledge, and furtherly reduce the gap between the data explosion and knowledge absence.

Building information modelling review with potential applications in tunnel engineering of China

Science.gov (United States)

Zhou, Weihong; Qin, Haiyang; Qiu, Junling; Fan, Haobo; Lai, Jinxing; Wang, Ke; Wang, Lixin

2017-08-01

Building information modelling (BIM) can be applied to tunnel engineering to address a number of problems, including complex structure, extensive design, long construction cycle and increased security risks. To promote the development of tunnel engineering in China, this paper combines actual cases, including the Xingu mountain tunnel and the Shigu Mountain tunnel, to systematically analyse BIM applications in tunnel engineering in China. The results indicate that BIM technology in tunnel engineering is currently mainly applied during the design stage rather than during construction and operation stages. The application of BIM technology in tunnel engineering covers many problems, such as a lack of standards, incompatibility of different software, disorganized management, complex combination with GIS (Geographic Information System), low utilization rate and poor awareness. In this study, through summary of related research results and engineering cases, suggestions are introduced and an outlook for the BIM application in tunnel engineering in China is presented, which provides guidance for design optimization, construction standards and later operation maintenance.

Geographic Information Technologies as an outreach activity in geo-scientific education

Science.gov (United States)

Maman, Shimrit; Isaacson, Sivan; Blumberg, Dan G.

2016-04-01

In recent years, a decline in the rates of examinees in the academic track that were entitled to an enhanced matriculation certificate in scientific-technological education was reported in Israel. To confront this problem the Earth and Planetary Image Facility (EPIF) at Ben-Gurion University of the Negev fosters interdisciplinary exploration through educational programs that make use of the facility and its equipment and enable the empowerment of the community by understanding and appreciating science and technology. This is achieved by using Geographic Information Technologies (GIT) such as remote sensing and Geographical Information Systems (GIS) for geo-physical sciences in activities that combine theoretical background with hands-on activities. Monitoring Earth from space by satellites, digital atlases and virtual-based positioning applications are examples for fusion of spatial information (geographic) and technology that the activity is based on. GIT opens a new chapter and a recent history of Cartography starting from the collection of spatial data to its presentation and analysis. GIS have replaced the use of classical atlas books and offer a variety of Web-based applications that provide maps and display up-to-date imagery. The purpose of this workshop is to expose teachers and students to GITs which are applicable in every classroom. The activity imparts free geographic information systems that exist in cyberspace and accessible to single users as the Israeli national GIS and Google earth, which are based on a spatial data and long term local and global satellite imagery coverage. In this paper, our "Think global-Map Local" activity is presented. The activity uses GIS and change detection technologies as means to encourage students to explore environmental issues both around the globe and close to their surroundings. The students detect changes by comparing multi temporal images of a chosen site and learn how to map the alterations and produce change

a Tool for Crowdsourced Building Information Modeling Through Low-Cost Range Camera: Preliminary Demonstration and Potential

Science.gov (United States)

Capocchiano, F.; Ravanelli, R.; Crespi, M.

2017-11-01

Within the construction sector, Building Information Models (BIMs) are more and more used thanks to the several benefits that they offer in the design of new buildings and the management of the existing ones. Frequently, however, BIMs are not available for already built constructions, but, at the same time, the range camera technology provides nowadays a cheap, intuitive and effective tool for automatically collecting the 3D geometry of indoor environments. It is thus essential to find new strategies, able to perform the first step of the scan to BIM process, by extracting the geometrical information contained in the 3D models that are so easily collected through the range cameras. In this work, a new algorithm to extract planimetries from the 3D models of rooms acquired by means of a range camera is therefore presented. The algorithm was tested on two rooms, characterized by different shapes and dimensions, whose 3D models were captured with the Occipital Structure SensorTM. The preliminary results are promising: the developed algorithm is able to model effectively the 2D shape of the investigated rooms, with an accuracy level comprised in the range of 5 - 10 cm. It can be potentially used by non-expert users in the first step of the BIM generation, when the building geometry is reconstructed, for collecting crowdsourced indoor information in the frame of BIMs Volunteered Geographic Information (VGI) generation.

Achieving informed decision-making for net zero energy buildings design using building performance simulation tools

NARCIS (Netherlands)

Attia, S.G.; Gratia, E.; De Herde, A.; Hensen, J.L.M.

2013-01-01

Building performance simulation (BPS) is the basis for informed decision-making of Net Zero Energy Buildings (NZEBs) design. This paper aims to investigate the use of building performance simulation tools as a method of informing the design decision of NZEBs. The aim of this study is to evaluate the

How much information disclosure of building energy performance is necessary?

International Nuclear Information System (INIS)

Hsu, David

2014-01-01

Many different governments have begun to require disclosure of building energy performance, in order to allow owners and prospective buyers to incorporate this information into their investment decisions. These policies, known as disclosure or information policies, require owners to benchmark their buildings and sometimes conduct engineering audits. However, given substantial variation in the cost to disclose different types of information, it is natural to ask: how much and what kind of information about building energy performance should be disclosed, and for what purposes? To answer this question, this paper assembles and cleans a comprehensive panel dataset of New York City multifamily buildings, and analyzes its predictive power using a Bayesian multilevel regression model. Analysis of variance (ANOVA) reveals that building-level variation is the most important factor in explaining building energy use, and that there are few, if any, relationships of building systems to observed energy use. This indicates that disclosure laws requiring benchmarking data may be relatively more useful than engineering audits in explaining the observed energy performance of existing buildings. These results should inform the further development of information disclosure laws. - Highlights: • A comprehensive panel dataset of energy performance and building characteristics was assembled and cleaned. • The effectiveness of the disclosed information to predict building energy performance was tested using a regression model. • Building-level variation has a greater effect than any building characteristic or systems. • Benchmarking data alone predicts energy performance equally as well as both benchmarking and engineering audit data together, and better than audit data alone

Analysis Of Educational Services Distribution-Based Geographic Information System GIS

OpenAIRE

Waleed Lagrab; Noura AKNIN

2015-01-01

Abstract This study analyzes the spatial distribution of kindergarten facilities in the study area based on the Geographic Information Systems GIS in order to test an efficiency of GIS technology to redistribute the existing kindergarten and choose the best location in the future and applying the standard criteria for selecting the suitable locations for kindergarten. To achieve this goal the data and information are collected via interviews and comprehensive statistics on the education facil...

Developing a workflow to identify inconsistencies in volunteered geographic information: a phenological case study

Science.gov (United States)

Mehdipoor, Hamed; Zurita-Milla, Raul; Rosemartin, Alyssa; Gerst, Katharine L.; Weltzin, Jake F.

2015-01-01

Recent improvements in online information communication and mobile location-aware technologies have led to the production of large volumes of volunteered geographic information. Widespread, large-scale efforts by volunteers to collect data can inform and drive scientific advances in diverse fields, including ecology and climatology. Traditional workflows to check the quality of such volunteered information can be costly and time consuming as they heavily rely on human interventions. However, identifying factors that can influence data quality, such as inconsistency, is crucial when these data are used in modeling and decision-making frameworks. Recently developed workflows use simple statistical approaches that assume that the majority of the information is consistent. However, this assumption is not generalizable, and ignores underlying geographic and environmental contextual variability that may explain apparent inconsistencies. Here we describe an automated workflow to check inconsistency based on the availability of contextual environmental information for sampling locations. The workflow consists of three steps: (1) dimensionality reduction to facilitate further analysis and interpretation of results, (2) model-based clustering to group observations according to their contextual conditions, and (3) identification of inconsistent observations within each cluster. The workflow was applied to volunteered observations of flowering in common and cloned lilac plants (Syringa vulgaris and Syringa x chinensis) in the United States for the period 1980 to 2013. About 97% of the observations for both common and cloned lilacs were flagged as consistent, indicating that volunteers provided reliable information for this case study. Relative to the original dataset, the exclusion of inconsistent observations changed the apparent rate of change in lilac bloom dates by two days per decade, indicating the importance of inconsistency checking as a key step in data quality

Developing a Workflow to Identify Inconsistencies in Volunteered Geographic Information: A Phenological Case Study.

Science.gov (United States)

Mehdipoor, Hamed; Zurita-Milla, Raul; Rosemartin, Alyssa; Gerst, Katharine L; Weltzin, Jake F

2015-01-01

Recent improvements in online information communication and mobile location-aware technologies have led to the production of large volumes of volunteered geographic information. Widespread, large-scale efforts by volunteers to collect data can inform and drive scientific advances in diverse fields, including ecology and climatology. Traditional workflows to check the quality of such volunteered information can be costly and time consuming as they heavily rely on human interventions. However, identifying factors that can influence data quality, such as inconsistency, is crucial when these data are used in modeling and decision-making frameworks. Recently developed workflows use simple statistical approaches that assume that the majority of the information is consistent. However, this assumption is not generalizable, and ignores underlying geographic and environmental contextual variability that may explain apparent inconsistencies. Here we describe an automated workflow to check inconsistency based on the availability of contextual environmental information for sampling locations. The workflow consists of three steps: (1) dimensionality reduction to facilitate further analysis and interpretation of results, (2) model-based clustering to group observations according to their contextual conditions, and (3) identification of inconsistent observations within each cluster. The workflow was applied to volunteered observations of flowering in common and cloned lilac plants (Syringa vulgaris and Syringa x chinensis) in the United States for the period 1980 to 2013. About 97% of the observations for both common and cloned lilacs were flagged as consistent, indicating that volunteers provided reliable information for this case study. Relative to the original dataset, the exclusion of inconsistent observations changed the apparent rate of change in lilac bloom dates by two days per decade, indicating the importance of inconsistency checking as a key step in data quality

Application of geographic information system for emergency management

International Nuclear Information System (INIS)

Best, R.G.; Guber, A.L.; Kliman, D.H.

1991-01-01

One of the responsibilities of the DOE Nevada Operations Office, under the Federal Radiological Emergency Response Plan (FRERP) and the Aerial Measuring System (AMS) program, is the acquisition and analysis of radiological and associated environmental data. Much of the data are in the form of maps, tabular summaries, and vertical imagery. It is critical that these data be rapidly compiled into a common format in order to make accurate observations and informed decisions. This data management task is both large and complex. Within the Federal Radiological Monitoring and Assessment Center (FRMAC) there is a continuing effort to improve the data management and communication process. The most recent addition to this essential function has been the development and testing of a deployable Digital Image Processing (IP) / Geographic Information System (GIS). To demonstrate the potential of GIS for emergency response, the system was utilized at an interagency post-emergency table top exercise. A geographic database, consisting of 27 coregistered ''layers'' of cultural, radiological, satellite image,and environmental data was developed for the area within a 50-mile radius of the River Bend Station in Louisiana. In support of the exercise, maps and real time displays of individual layers and combinations of layers were produced to determine the impact of a hypothetical radiological release and to develop mitigation plans. 3 refs., 2 figs

Building Construction Progress Monitoring Using Unmanned Aerial System (uas), Low-Cost Photogrammetry, and Geographic Information System (gis)

Science.gov (United States)

Bognot, J. R.; Candido, C. G.; Blanco, A. C.; Montelibano, J. R. Y.

2018-05-01

Monitoring the progress of building's construction is critical in construction management. However, measuring the building construction's progress are still manual, time consuming, error prone, and impose tedious process of analysis leading to delays, additional costings and effort. The main goal of this research is to develop a methodology for building construction progress monitoring based on 3D as-built model of the building from unmanned aerial system (UAS) images, 4D as-planned model (with construction schedule integrated) and, GIS analysis. Monitoring was done by capturing videos of the building with a camera-equipped UAS. Still images were extracted, filtered, bundle-adjusted, and 3D as-built model was generated using open source photogrammetric software. The as-planned model was generated from digitized CAD drawings using GIS. The 3D as-built model was aligned with the 4D as-planned model of building formed from extrusion of building elements, and integration of the construction's planned schedule. The construction progress is visualized via color-coding the building elements in the 3D model. The developed methodology was conducted and applied from the data obtained from an actual construction site. Accuracy in detecting `built' or `not built' building elements ranges from 82-84 % and precision of 50-72 %. Quantified progress in terms of the number of building elements are 21.31% (November 2016), 26.84 % (January 2017) and 44.19 % (March 2017). The results can be used as an input for progress monitoring performance of construction projects and improving related decision-making process.

A Geographical Information System for Malaria in Colombia (SIGMA)

International Nuclear Information System (INIS)

Poveda, German; Hernandez, Olver; Urquijo, Lenis; Padilla Julio Cesar

2005-01-01

A Geographical Information System for Malaria in Colombia (SIGMA) is introduced and its capabilities and modules are described. It allows the interactive visualization of the Colombian Ministry of Social Protection database at national, regional and municipal levels and the analysis of relationships with different environmental and climatic variables. SIGMA is a powerful decision support system for human health intervention and management programs in Colombia

Applications of Remote Sensing and Geographic Information System (GIS) in Archaeology

Digital Repository Service at National Institute of Oceanography (India)

ManiMurali, R.

The advancement of remote sensing technology and the analysing capability of Geographical Information System (GIS) can very well be used in the science of Archaeology. Though these subjects look apart, they can be studied in conjunction with each...

From access to re-use: a user’s perspective on public sector information availability

OpenAIRE

Frederika Welle Donker

2016-01-01

If data are the building blocks to generate information needed to acquire knowledge and understanding, then geodata, i.e. data with a geographic component (geodata), are the building blocks for information vital for decision-making at all levels of government, for companies and for citizens. Governments collect geodata and create, develop and use geo-information - also referred to as spatial information - to carry out public tasks as almost all decision-making involves a geographic component,...

The study of disaster situation awareness based on volunteered geographic information

Science.gov (United States)

Zhao, Qiansheng; Chen, Zi; Li, Shengming; Luo, Nianxue

2015-12-01

As the development of Web 2.0, the social media like microblog, blogs and social network have supplied a bunch of information with locations (Volunteered Geographical Information, VGI).Recent years many cases have shown that, if disaster happened, the cyber citizens will get together very quickly and share the disaster information, this results a bunch of volunteered geographical information about disaster situation which is very valuable for disaster response if this VGIs are used efficiently and properly. This project will take typhoon disaster as case study. In this paper, we study the relations between weibo messages and the real typhoon situation, we proposed an analysis framework for mine the relations between weibo messages distribution and physical space. We found that the number of the weibo messages, key words frequency and spatial temporary distribution of the messages have strong relations with the disaster spread in the real world, and this research results can improve our disaster situation awareness in the future. The achievement of the study will give a method for typhoon disaster situation awareness based on VGI from the bottom up, and will locate the disaster spot and evolution quickly which is very important for disaster response and recover.

HiGIS: An Open Framework for High Performance Geographic Information System

Directory of Open Access Journals (Sweden)

XIONG, W.

2015-08-01

Full Text Available Big data era expose many challenges to geospatial data management, geocomputation and cartography. There is no exception in geographic information systems (GIS community. Technologies and facilities of high performance computing (HPC become more and more feasible to researchers, while mobile computing, ubiquitous computing, and cloud computing are emerging. But traditional GIS need to be improved to take advantages of all these evolutions. We proposed and implemented a GIS married with high performance computing, which is called HiGIS. The goal of HiGIS is to promote the performance of geocomputation by leveraging the power of HPC, and to build an open framework for geospatial data storing, processing, displaying and sharing. In this paper the architecture, data model and modules of the HiGIS system are introduced. A geocomputation scheduling engine based on communicating sequential process was designed to exploit spatial analysis and processing. Parallel I/O strategy using file view was proposed to improve the performance of geospatial raster data access. In order to support web-based online mapping, an interactive cartographic script was provided to represent a map. A demostration of locating house was used to manifest the characteristics of HiGIS. Parallel and concurrency performance experiments show the feasibility of this system.

Socio-psychological technology of building entrepreneurial culture of the geographical region representatives in Russia

Directory of Open Access Journals (Sweden)

Tahir Yu. Bazarov

2016-12-01

Full Text Available The paper presents the concept of an interdisciplinary project on the development and implementation of socio-psychological technologies of building enterpriseculture of the geographical region representatives in Russia. The purpose of this technology is to encourage entrepreneurial activity of the working-age population of a certain Russian geographical region with its cultural, historical, economic and socio-psychological features of the project launches by Professor Takhir Yu. Bazarov «Stolypin reform: version 2.0» and is being implemented in the Saratov region which is historically associated with the name of the prominent Russian reformer Pyotr Stolypin. The project started in the Chernyshevsky Saratov National Research State University in the course of the 7th Scientific Practical Conference «Organizational psychology: people and risks» (October 19-20, 2016 devoted to the interdisciplinary analysis of the reforming practice of the Russian economy within «past – present – future» transspective, leadership in terms of reforms and capacity assessment (socio psychological, cultural, economic of the Saratov region in the context of more active development of entrepreneurship by establishing the entrepreneurial culture. The paper describes innovative communication technology organization and promotion of value and target-oriented discussions of scientists, managers and students (among the authors T. Yu. Bazarov and T. A. Nestik are among the authors. The results of socio-psychological research are presented and discussed: a the image of Saratov city and the image of Saratov entrepreneurs, b Saratov citizens’ idea about the (ideal and actual image of Saratov entrepreneurs and Saratov respect of the business selfassessment by entrepreneurs of their image in the eyes of citizens, c the analysis of the reformer personality and successful leadership in terms of reforms, d the results of the comparative analysis of the early twentieth and

Development of a Carbon Management Geographic Information System (GIS) for the United States

Energy Technology Data Exchange (ETDEWEB)

Howard Herzog; Holly Javedan

2009-12-31

In this project a Carbon Management Geographical Information System (GIS) for the US was developed. The GIS stored, integrated, and manipulated information relating to the components of carbon management systems. Additionally, the GIS was used to interpret and analyze the effect of developing these systems. This report documents the key deliverables from the project: (1) Carbon Management Geographical Information System (GIS) Documentation; (2) Stationary CO{sub 2} Source Database; (3) Regulatory Data for CCS in United States; (4) CO{sub 2} Capture Cost Estimation; (5) CO{sub 2} Storage Capacity Tools; (6) CO{sub 2} Injection Cost Modeling; (7) CO{sub 2} Pipeline Transport Cost Estimation; (8) CO{sub 2} Source-Sink Matching Algorithm; and (9) CO{sub 2} Pipeline Transport and Cost Model.

Translating building information modeling to building energy modeling using model view definition.

Science.gov (United States)

Jeong, WoonSeong; Kim, Jong Bum; Clayton, Mark J; Haberl, Jeff S; Yan, Wei

2014-01-01

This paper presents a new approach to translate between Building Information Modeling (BIM) and Building Energy Modeling (BEM) that uses Modelica, an object-oriented declarative, equation-based simulation environment. The approach (BIM2BEM) has been developed using a data modeling method to enable seamless model translations of building geometry, materials, and topology. Using data modeling, we created a Model View Definition (MVD) consisting of a process model and a class diagram. The process model demonstrates object-mapping between BIM and Modelica-based BEM (ModelicaBEM) and facilitates the definition of required information during model translations. The class diagram represents the information and object relationships to produce a class package intermediate between the BIM and BEM. The implementation of the intermediate class package enables system interface (Revit2Modelica) development for automatic BIM data translation into ModelicaBEM. In order to demonstrate and validate our approach, simulation result comparisons have been conducted via three test cases using (1) the BIM-based Modelica models generated from Revit2Modelica and (2) BEM models manually created using LBNL Modelica Buildings library. Our implementation shows that BIM2BEM (1) enables BIM models to be translated into ModelicaBEM models, (2) enables system interface development based on the MVD for thermal simulation, and (3) facilitates the reuse of original BIM data into building energy simulation without an import/export process.

Translating Building Information Modeling to Building Energy Modeling Using Model View Definition

Directory of Open Access Journals (Sweden)

WoonSeong Jeong

2014-01-01

Full Text Available This paper presents a new approach to translate between Building Information Modeling (BIM and Building Energy Modeling (BEM that uses Modelica, an object-oriented declarative, equation-based simulation environment. The approach (BIM2BEM has been developed using a data modeling method to enable seamless model translations of building geometry, materials, and topology. Using data modeling, we created a Model View Definition (MVD consisting of a process model and a class diagram. The process model demonstrates object-mapping between BIM and Modelica-based BEM (ModelicaBEM and facilitates the definition of required information during model translations. The class diagram represents the information and object relationships to produce a class package intermediate between the BIM and BEM. The implementation of the intermediate class package enables system interface (Revit2Modelica development for automatic BIM data translation into ModelicaBEM. In order to demonstrate and validate our approach, simulation result comparisons have been conducted via three test cases using (1 the BIM-based Modelica models generated from Revit2Modelica and (2 BEM models manually created using LBNL Modelica Buildings library. Our implementation shows that BIM2BEM (1 enables BIM models to be translated into ModelicaBEM models, (2 enables system interface development based on the MVD for thermal simulation, and (3 facilitates the reuse of original BIM data into building energy simulation without an import/export process.

Geographical dimensions of risk management : the contribution of spatial planning and Geo-ICT to risk reduction

NARCIS (Netherlands)

Neuvel, J.M.M.

2009-01-01

Geographical information systems can offer insights into the possibilities for emergency response and the possibilities for self help during a disaster, such as a flooding or explosions. Based on this information, proposed housing areas can be adapted. The building site can be elevated or ‘safe

Geographical Information Systems (GIS); Sistemas de Informacion Geografica

Energy Technology Data Exchange (ETDEWEB)

Garcia Santiago, P.A. [Inisel Espacio, Madrid (Spain)

1994-12-31

Geographical Information Systems (GIS) have converted in a computer`s tool that due of its great versatility, exceeds of its usage as Basic Cartography Manager. The best GIS to use (vector or raster) will depend on the type of data we work with, we should keep in mind that the use of a specific GIS does not mean total incompatibility with others GIS. Future tendencies in this field aim to Data Storage Optimization and to Shared Operating System between Workstations and Personal computers. (Author)

Multidisciplinary Energy Assessment of Tertiary Buildings: Automated Geomatic Inspection, Building Information Modeling Reconstruction and Building Performance Simulation

Directory of Open Access Journals (Sweden)

Faustino Patiño-Cambeiro

2017-07-01

Full Text Available There is an urgent need for energy efficiency in buildings within the European framework, considering its environmental implications, and Europe’s energy dependence. Furthermore, the need for enhancing and increasing productivity in the building industry turns new technologies and building energy performance simulation environments into extremely interesting solutions towards rigorous analysis and decision making in renovation within acceptable risk levels. The present work describes a multidisciplinary approach for the estimation of the energy performance of an educational building. The research involved data acquisition with advanced geomatic tools, the development of an optimized building information model, and energy assessment in Building Performance Simulation (BPS software. Interoperability issues were observed in the different steps of the process. The inspection and diagnostic phases were conducted in a timely, accurate manner thanks to automated data acquisition and subsequent analysis using Building Information Modeling based tools (BIM-based tools. Energy simulation was performed using Design Builder, and the results obtained were compared with those yielded by the official software tool established by Spanish regulations for energy certification. The discrepancies between the results of both programs have proven that the official software program is conservative in this sense. This may cause the depreciation of the assessed buildings.

Analysing commons to improve the design of volunteered geographic information repositories

CSIR Research Space (South Africa)

Van den Berg, H

2011-06-01

Full Text Available that everyone with Internet access can join the user community. Volunteered geographic information (VGI) is a special case of user generated content. Web 2.0 technologies have enabled user generated commons, such as open source projects and Wikipedia; the former...

Project Mapping to Build Capacity and Demonstrate Impact in the Earth Sciences

Science.gov (United States)

Hemmings, S. N.; Searby, N. D.; Murphy, K. J.; Mataya, C. J.; Crepps, G.; Clayton, A.; Stevens, C. L.

2017-12-01

Diverse organizations are increasingly using project mapping to communicate location-based information about their activities. NASA's Earth Science Division (ESD), through the Earth Science Data Systems and Applied Sciences' Capacity Building Program (CBP), has created a geographic information system of all ESD projects to support internal program management for the agency. The CBP's NASA DEVELOP program has built an interactive mapping tool to support capacity building for the program's varied constituents. This presentation will explore the types of programmatic opportunities provided by a geographic approach to management, communication, and strategic planning. We will also discuss the various external benefits that mapping supports and that build capacity in the Earth sciences. These include activities such as project matching (location-focused synergies), portfolio planning, inter- and intra-organizational collaboration, science diplomacy, and basic impact analysis.

Geographic information processing in the Integrated Measuring and Information System (IMIS). An overview; Geographische Informationsverarbeitung im integrierten Mess- und Informationssystem (IMIS). Ein Ueberblick

Energy Technology Data Exchange (ETDEWEB)

Burbeck, S. [Bundesamt fuer Strahlenschutz (BfS), Freiburg (Germany)

2014-01-20

As most public administrations the Federal Office for Radiation Protection faces various tasks and requirements with geographic information playing an important role. All the more this is true for the Department of Emergency Protection with its Integrated Measuring and Information System (IMIS) and the tasks of information provision for the public. Crucial part in geographic information extraction and provision is cartographic representation. In BfS the different requirements shall be met by a common software architecture, based on web services.

Managing environmental radioactivity monitoring data: a geographic information system approach

International Nuclear Information System (INIS)

Heywood, I.; Cornelius, S.

1993-01-01

An overview of the current British approach to environmental radiation monitoring is presented here, followed by a discussion of the major issues which would have to be considered in formulating a geographical information system (GIS) for the management of radiation monitoring data. Finally, examples illustrating the use of spatial data handling and automated cartographic techniques are provided from work undertaken by the authors. These examples are discussed in the context of developing a National Radiological Spatial Information System (NRSIS) demonstrator utilising GIS technology. (Author)

A Geographic Method for High Resolution Spatial Heat Planning

DEFF Research Database (Denmark)

Nielsen, Steffen

2014-01-01

more detailed modelling that takes the geographic placement of buildings and the differences among DH systems into account. In the present article, a method for assessing the costs of DH expansions has been developed. The method was applied in a geographic information system (GIS) model that consists...... are considering distribution costs based on the geographic properties of each area and assessing transmission costs based on an iterative process that examines expansion potentials gradually. The GIS model is only applicable to a Danish context, but the method itself can be applied to other countries....... of three parts and assesses the costs of heat production, distribution, and transmission. The model was also applied to an actual case in order to show how it can be used. The model shows many improvements in the method for the assessment of distribution costs and transmission costs. Most notable...

Integrating Building Information Modeling and Augmented Reality to Improve Investigation of Historical Buildings

Directory of Open Access Journals (Sweden)

Francesco Chionna

2015-12-01

Full Text Available This paper describes an experimental system to support investigation of historical buildings using Building Information Modeling (BIM and Augmented Reality (AR. The system requires the use of an off-line software to build the BIM representation and defines a method to integrate diagnostic data into BIM. The system offers access to such information during site investigation using AR glasses supported by marker and marker-less technologies. The main innovation is the possibility to contextualize through AR not only existing BIM properties but also results from non-invasive tools. User evaluations show how the use of the system may enhance the perception of engineers during the investigation process.

GEOTRANS: An interface program from GEOPROGRAM to a geographic information system

International Nuclear Information System (INIS)

Schilling, S.P.

1991-01-01

The US Geological Survey Plotter Lab, Denver, Colorado, has created a computer program to translate data from GEOPROGRAM recording files to a geographic information system (GIS) and a relational database. The program, GEOTRANS, takes files recorded on a Kern DSR 11 Analytical Plotter and translates the coordinate information into the KORK Geographic Information System (KGIS) and places the non-coordinate information into ORACLE, a relational database program. The advantage of linking the data collection capabilities of GEOPROGRAM with KGIS and ORACLE is to offer geologists a means of merging, editing, and querying coordinate and relational databases online. GEOTRANS is written in Pascal v.3.8 running under the DEC VMS operating system on a Microvax II computer. The program is structured in such a manner as to facilitate converting and restructuring of the program to translate 3D coordinate and attribute data collected with an analytical plotter to either 3D or other 2D GIS. This report describes how files from GEOPROGRAM are read, how 2D topology is created, and how GEOTRANS procedures and various calls to libraries transform and insert data to the proper place. A user's manual is included to run GEOTRANS. 7 refs., 6 figs

Geographic Names

Data.gov (United States)

Minnesota Department of Natural Resources — The Geographic Names Information System (GNIS), developed by the United States Geological Survey in cooperation with the U.S. Board of Geographic Names, provides...

Assessing Completeness and Spatial Error of Features in Volunteered Geographic Information

Directory of Open Access Journals (Sweden)

Anthony Stefanidis

2013-06-01

Full Text Available The assessment of the quality and accuracy of Volunteered Geographic Information (VGI contributions, and by extension the ultimate utility of VGI data has fostered much debate within the geographic community. The limited research to date has been focused on VGI data of linear features and has shown that the error in the data is heterogeneously distributed. Some have argued that data produced by numerous contributors will produce a more accurate product than an individual and some research on crowd-sourced initiatives has shown that to be true, although research on VGI is more infrequent. This paper proposes a method for quantifying the completeness and accuracy of a select subset of infrastructure-associated point datasets of volunteered geographic data within a major metropolitan area using a national geospatial dataset as the reference benchmark with two datasets from volunteers used as test datasets. The results of this study illustrate the benefits of including quality control in the collection process for volunteered data.

Cost recovery in geographic information systems and conflicts with copyright law

Science.gov (United States)

Roberts, Jon L.

1993-10-01

The ability to recover cost by the sale of geographic information is dependent upon the ownership of the copyright in and to that information. The ownership of the copyright turns upon whether one entity is an employee of the other or whether the copyrightable work falls within certain statutorily defined categories in the copyright law. Absent the specific requirements being fulfilled the ownership of the data may not be exactly as the parties expect.

Geographic information system (GIS) representation of coal-bearing areas in India and Bangladesh

Science.gov (United States)

Trippi, Michael H.; Tewalt, Susan J.

2011-01-01

Geographic information system (GIS) information may facilitate energy studies, which in turn provide input for energy policy decisions. Prior to this study, no GIS file representing the occurrence of coal-bearing units in India or Bangladesh was known to exist. This Open-File Report contains downloadable shapefiles representing the coalfields of India and Bangladesh and a limited number of chemical and petrographic analyses of India and Bangladesh coal samples. Also included are maps of India and Bangladesh showing the locations of the coalfields and coal samples in the shapefiles, figures summarizing the stratigraphic units in the coalfields of India and Bangladesh, and a brief report summarizing the stratigraphy and geographic locations of coal-bearing deposits in India and Bangladesh.

ASSESSING ACCIDENT HOTSPOTS BY USING VOLUNTEERED GEOGRAPHIC INFORMATION

Directory of Open Access Journals (Sweden)

Golnoosh

2017-11-01

Full Text Available Due to the ever-increasing number of vehicles, transportation issues, especially transportation safety have gained great importance. One of the social problems in the world, and particularly in developing countries, which each year imposes great casualties, and economic, social and cultural costs on society, is traffic accidents. Traffic accidents cause waste of time and assets and loss of human resources in society, therefore studies and measures to reduce accidents and damage caused by them, particularly in recent decades, has become important. One of the suggested ways to deal with the problem of car accidents is the modeling of accident-prone points, as by identifying these points, factors affecting accidents can be identified, and elimination of these factors leads to a reduction in accidents. Numerous studies have been conducted in this respect, using official police data to identify these points and performing necessary analysis on them. Official data has gaps and shortcomings. Using Volunteered Geographic Information to determine accident-prone venues can be a suitable answer to the problems of using official data. The aim of this study is the use of volunteered geographic information in relation to the accidents and their causes. By taking into account factors affecting traffic accidents in the study area, and determining the importance of each factor, as well as the severity-of-accidents parameter, and using the Expert Choice software, a decision-making software based on the hierarchical analysis, high-risk venues are determined, and the accident-prone points of the study area are specified.

Geographic Information System (GIS) Applications at a Multi-Site Community College.

Science.gov (United States)

Pottle, Laura

This report presents the Front Range Community College (FRCC) (Colorado) Office of Institutional Research's recent expansion of its data analysis and reporting capabilities to include a geographic information system (GIS). Utilizing ArcView GIS software, the college is better able to visualize institutional and environmental data. They have…

Building Land Information Policies

DEFF Research Database (Denmark)

Enemark, Stig

2004-01-01

The paper presents a conceptual understanding in the areas of Cadastre, Land Administration, and Land Management as a basis for building adequate land information policies. To develop this understanding the paper looks at each area as a system or an infrastructure designed for handling specific...... of measurement science, spatial information, management, and land management. (2) To establish national professional associations which accommodate a modern interdisciplinary profile. (3) To assess the capacity needs in land administration and to develop the capacity needed at societal, institutional...... and personal level.    (4) To establish appropriate institutional and organisational infrastructures to manage the integration of topographic mapping and cadastral information into a coherent land administration system for sustainable development. The paper aims to establish the basic understanding for dealing...

Application of geographical information system (GIS) for the preparedness for response to nuclear emergencies

International Nuclear Information System (INIS)

Chaudhury, Probal; Pradeepkumar, K.S.; Saindane, S.S.; Suri, M.M.K.; Sharma, D.N.

2005-01-01

As recommended by International Atomic Energy Agency (IAEA), preparedness for response to nuclear/radiological emergencies is essential for all nations including those not having nuclear facilities. Methodology and systems for quick assessment of radiological impact following any large scale radioactive release/contamination in the environment are already developed. Efforts are being made to provide Geographical Information System (GIS) support for enhancing the capability of quick decision making on the implementation of countermeasures and to strengthen the Emergency Preparedness Program. This requires development of the database of nuclear facilities, roads, buildings, agriculture land, population density and geolocating using geocoded addresses. GIS helps in the creation of custom maps that spatially show several data layers pertinent to the cities/area around the nuclear power plants. The GIS based software imports and spatially displays the predicted movement of radioactive plume and helps in the revision of emergency plans based on the periodic inputs from various systems and monitoring teams. These tools, allow the Emergency Response Centers to take decisions regarding the progress, success and future direction of response in large cities/complex sites. (author)

Developing Verification Systems for Building Information Models of Heritage Buildings with Heterogeneous Datasets

Science.gov (United States)

Chow, L.; Fai, S.

2017-08-01

The digitization and abstraction of existing buildings into building information models requires the translation of heterogeneous datasets that may include CAD, technical reports, historic texts, archival drawings, terrestrial laser scanning, and photogrammetry into model elements. In this paper, we discuss a project undertaken by the Carleton Immersive Media Studio (CIMS) that explored the synthesis of heterogeneous datasets for the development of a building information model (BIM) for one of Canada's most significant heritage assets - the Centre Block of the Parliament Hill National Historic Site. The scope of the project included the development of an as-found model of the century-old, six-story building in anticipation of specific model uses for an extensive rehabilitation program. The as-found Centre Block model was developed in Revit using primarily point cloud data from terrestrial laser scanning. The data was captured by CIMS in partnership with Heritage Conservation Services (HCS), Public Services and Procurement Canada (PSPC), using a Leica C10 and P40 (exterior and large interior spaces) and a Faro Focus (small to mid-sized interior spaces). Secondary sources such as archival drawings, photographs, and technical reports were referenced in cases where point cloud data was not available. As a result of working with heterogeneous data sets, a verification system was introduced in order to communicate to model users/viewers the source of information for each building element within the model.

Development of a Conceptual Mapping Standard to Link Building and Geospatial Information

Directory of Open Access Journals (Sweden)

Taewook Kang

2018-04-01

Full Text Available This study introduces the BIM (building information modeling-GIS (geographic information system conceptual mapping (B2GM standard ISO N19166 and proposes a mapping mechanism. In addition, the major issues concerning BIM-GIS integration, and the considerations that it requires, are discussed. The B2GM is currently being standardized by the spatial-information international standardization organization TC211. Previous studies on BIM-GIS integration seem to focus on the integration of different types of model schemas and on the implementation of service interfaces. B2GM concerns the clear definition of the conditions and methods for mapping the object information required from the user’s use-case viewpoint for city-scale mapping. The benefits of the B2GM approach are that the user is able directly control the BIM-GIS linkage and integration process in order to acquire the necessary objection information. This can reveal cases of possibly unclear BIM-GIS integration outside the black box in an explicit and standard way, so that the user can distinctively predict the final output obtainable from the BIM-GIS integration. This study examined B2GM in terms of its development background, components, and several utilization examples, as well as the levels and considerations of the integration of different BIM-GIS models.

Integrating Building Information Modeling and Green Building Certification: The BIM-LEED Application Model Development

Science.gov (United States)

Wu, Wei

2010-01-01

Building information modeling (BIM) and green building are currently two major trends in the architecture, engineering and construction (AEC) industry. This research recognizes the market demand for better solutions to achieve green building certification such as LEED in the United States. It proposes a new strategy based on the integration of BIM…

Integrating Geographic Information Systems in Business School Curriculum: An Initial Example

Science.gov (United States)

King, Michael A.; Arnette, Andrew N.

2011-01-01

Geographic information systems have experienced rapid growth and user adoption over the last four decades, due to an increasing value to the business community. However, business schools are not teaching geospatial concepts and the related location intelligence to their students. This curriculum decision seems completely at odds with business'…

iSERVO: Implementing the International Solid Earth Research Virtual Observatory by Integrating Computational Grid and Geographical Information Web Services

Science.gov (United States)

Aktas, Mehmet; Aydin, Galip; Donnellan, Andrea; Fox, Geoffrey; Granat, Robert; Grant, Lisa; Lyzenga, Greg; McLeod, Dennis; Pallickara, Shrideep; Parker, Jay; Pierce, Marlon; Rundle, John; Sayar, Ahmet; Tullis, Terry

2006-12-01

We describe the goals and initial implementation of the International Solid Earth Virtual Observatory (iSERVO). This system is built using a Web Services approach to Grid computing infrastructure and is accessed via a component-based Web portal user interface. We describe our implementations of services used by this system, including Geographical Information System (GIS)-based data grid services for accessing remote data repositories and job management services for controlling multiple execution steps. iSERVO is an example of a larger trend to build globally scalable scientific computing infrastructures using the Service Oriented Architecture approach. Adoption of this approach raises a number of research challenges in millisecond-latency message systems suitable for internet-enabled scientific applications. We review our research in these areas.

Objective Evaluation in an Online Geographic Information System Certificate Program

OpenAIRE

Scott L. WALKER

2005-01-01

Objective Evaluation in an Online Geographic Information System Certificate Program Asst. Professor. Dr. Scott L. WALKER Texas State University-San Marcos San Marcos, Texas, USA ABSTRACT Departmental decisions regarding distance education programs can be subject to subjective decision-making processes influenced by external factors such as strong faculty opinions or pressure to increase student enrolment. This paper outlines an evaluation of a departmental distance-education program....

The use of geographical information systems in socio-economic studies

OpenAIRE

Daplyn, P.; Cropley, J.; Treagust, S.; Gordon, A.

1994-01-01

Geographical information systems (GIS) have found wide and growing applications, as digital remote-sensing data and computer technology have become more sophisticated, more easily available and less expensive. NRI recently undertook preliminary research into potential socio-economic applications of GIS. The feasibility of utilizing spatial data, available in GIS, to model socio-economic relationships was examined. It included the following steps: (a) identification of hypothetical relationshi...

Construction Operations Building Information Exchange (COBIE)

Science.gov (United States)

2007-06-01

Swalley U.S. Department of State, Overseas Buildings Operations Toby Wilson U.S. Army, Corps of Engineers, Engineer R&D Center Jeff Wix AEC3 The...exchanged in COBIE. To map those information exchanges to the IFC model, the Information Delivery Manual (IDM) process [ Wix 2007] was also used. The...Folksonomy. Wikimedia Foundation. http://en.wikipedia.org/wiki/Folksonomy/, accessed 3 August 2007. Wix , Jeffrey. 2007. Information Delivery Manual

Recent Developments and Future Trends in Volunteered Geographic Information Research: The Case of OpenStreetMap

Directory of Open Access Journals (Sweden)

Pascal Neis

2014-01-01

Full Text Available User-generated content (UGC platforms on the Internet have experienced a steep increase in data contributions in recent years. The ubiquitous usage of location-enabled devices, such as smartphones, allows contributors to share their geographic information on a number of selected online portals. The collected information is oftentimes referred to as volunteered geographic information (VGI. One of the most utilized, analyzed and cited VGI-platforms, with an increasing popularity over the past few years, is OpenStreetMap (OSM, whose main goal it is to create a freely available geographic database of the world. This paper presents a comprehensive overview of the latest developments in VGI research, focusing on its collaboratively collected geodata and corresponding contributor patterns. Additionally, trends in the realm of OSM research are discussed, highlighting which aspects need to be investigated more closely in the near future.

A geographic information system applied to a malaria field study in western Kenya.

Science.gov (United States)

Hightower, A W; Ombok, M; Otieno, R; Odhiambo, R; Oloo, A J; Lal, A A; Nahlen, B L; Hawley, W A

1998-03-01

This paper describes use of the global positioning system (GPS) in differential mode (DGPS) to obtain highly accurate longitudes, latitudes, and altitudes of 1,169 houses, 15 schools, 40 churches, four health care centers, 48 major mosquito breeding sites, 10 borehole wells, seven shopping areas, major roads, streams, the shore of Lake Victoria, and other geographic features of interest associated with a longitudinal study of malaria in 15 villages in western Kenya. The area mapped encompassed approximately 70 km2 and included 42.0 km of roads, 54.3 km of streams, and 15.0 km of lake shore. Location data were entered into a geographic information system for map production and linkage with various databases for spatial analyses. Spatial analyses using parasitologic and entomologic data are presented as examples. Background information on DGPS is presented along with estimates of effort and expense to produce the map information.

Building Information Model: advantages, tools and adoption efficiency

Science.gov (United States)

Abakumov, R. G.; Naumov, A. E.

2018-03-01

The paper expands definition and essence of Building Information Modeling. It describes content and effects from application of Information Modeling at different stages of a real property item. Analysis of long-term and short-term advantages is given. The authors included an analytical review of Revit software package in comparison with Autodesk with respect to: features, advantages and disadvantages, cost and pay cutoff. A prognostic calculation is given for efficiency of adoption of the Building Information Modeling technology, with examples of its successful adoption in Russia and worldwide.

Geographic Information System (GIS) characterizations of benthic habitats near South Florida coast (NODC Accession 0000600)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data collection uses a Geographic Information System (GIS) to organize and characterize information about benthic communities and substrates, which are...

Structures data collection for The National Map using volunteered geographic information

Science.gov (United States)

Poore, Barbara S.; Wolf, Eric B.; Korris, Erin M.; Walter, Jennifer L.; Matthews, Greg D.

2012-01-01

The U.S. Geological Survey (USGS) has historically sponsored volunteered data collection projects to enhance its topographic paper and digital map products. This report describes one phase of an ongoing project to encourage volunteers to contribute data to The National Map using online editing tools. The USGS recruited students studying geographic information systems (GIS) at the University of Colorado Denver and the University of Denver in the spring of 2011 to add data on structures - manmade features such as schools, hospitals, and libraries - to four quadrangles covering metropolitan Denver. The USGS customized a version of the online Potlatch editor created by the OpenStreetMap project and populated it with 30 structure types drawn from the Geographic Names Information System (GNIS), a USGS database of geographic features. The students corrected the location and attributes of these points and added information on structures that were missing. There were two rounds of quality control. Student volunteers reviewed each point, and an in-house review of each point by the USGS followed. Nine-hundred and thirty-eight structure points were initially downloaded from the USGS database. Editing and quality control resulted in 1,214 structure points that were subsequently added to The National Map. A post-project analysis of the data shows that after student edit and peer review, 92 percent of the points contributed by volunteers met National Map Accuracy Standards for horizontal accuracy. Lessons from this project will be applied to later phases. These include: simplifying editing tasks and the user interfaces, stressing to volunteers the importance of adding structures that are missing, and emphasizing the importance of conforming to editorial guidelines for formatting names and addresses of structures. The next phase of the project will encompass the entire State of Colorado and will allow any citizen to contribute structures data. Volunteers will benefit from this

DEVELOPING VERIFICATION SYSTEMS FOR BUILDING INFORMATION MODELS OF HERITAGE BUILDINGS WITH HETEROGENEOUS DATASETS

Directory of Open Access Journals (Sweden)

L. Chow

2017-08-01

Full Text Available The digitization and abstraction of existing buildings into building information models requires the translation of heterogeneous datasets that may include CAD, technical reports, historic texts, archival drawings, terrestrial laser scanning, and photogrammetry into model elements. In this paper, we discuss a project undertaken by the Carleton Immersive Media Studio (CIMS that explored the synthesis of heterogeneous datasets for the development of a building information model (BIM for one of Canada’s most significant heritage assets – the Centre Block of the Parliament Hill National Historic Site. The scope of the project included the development of an as-found model of the century-old, six-story building in anticipation of specific model uses for an extensive rehabilitation program. The as-found Centre Block model was developed in Revit using primarily point cloud data from terrestrial laser scanning. The data was captured by CIMS in partnership with Heritage Conservation Services (HCS, Public Services and Procurement Canada (PSPC, using a Leica C10 and P40 (exterior and large interior spaces and a Faro Focus (small to mid-sized interior spaces. Secondary sources such as archival drawings, photographs, and technical reports were referenced in cases where point cloud data was not available. As a result of working with heterogeneous data sets, a verification system was introduced in order to communicate to model users/viewers the source of information for each building element within the model.

ENVIRONMENTAL PROBLEM SOLVING WITH GEOGRAPHIC INFORMATION SYSTEMS: 1994 AND 1999 CONFERENCE PROCEEDINGS

Science.gov (United States)

These two national conferences, held in Cincinnati, Ohio in 1994 and 1999, addressed the area of environmental problem solving with Geographic Information Systems. This CD-ROM is a compilation of the proceedings in PDF format. The emphasis of the conference presentations were on ...

SilvaCarbon: Volunteered Geographical Information and Effective Monitoring

Science.gov (United States)

Sun, M.

2011-12-01

Significant amounts of efforts have been taken into monitoring forest and terrestrial carbon by many countries in recent years. As the rapid increase of methodologies and resources, international collaboration is critical now for enhancing capacity of managing and sharing the ongoing research efficiently worldwide. Moreover, much broader citizen participants with or without expert training have been involved in. Fortunately, the emergence of Web2.0, social networking, and geopositioning technology make such wide-range collaboration and participation on geospatial science research possible. The concept of Volunteer Geographical Information (VGI) coined by Michael F. Goodchild enables the ability to contribute georeferenced and disseminated scientific resource and to exchange information over the web. With this in mind, SilvaCarbon, applying the above technologies, is a project conducted by U.S. federal agencies as a U.S. contribution to the Forest Carbon Tracking task of the intergovernmental Group on Earth Observation. Clearly, all research activities must rely on geographic data. And because of the observational objectives of Forest Carbon Tracking task, data sharing is a main objective of the project needed to be addressed. Data can be captured directly, contributed by secondary sources, or obtained from historical archive for the past period. Each VGI participant becomes a sensor with the ability to collect and share data. A given phenomenon can be always described more sufficient by data from multiple sources than captured individually. And data sharing can also satisfy the desire to avoid data duplication. Another purpose of Silvacarbon is to describe the activity states of involved countries, communities and individual participants and to help communicating. With the assistant of the other social networking like Facebook and Twitter, VGI participants are given an access to broadcast states of their research or activities. They also can plan travels and trades

Geographic information systems: introduction.

Science.gov (United States)

Calistri, Paolo; Conte, Annamaria; Freier, Jerome E; Ward, Michael P

2007-01-01

The recent exponential growth of the science and technology of geographic information systems (GIS) has made a tremendous contribution to epidemiological analysis and has led to the development of new powerful tools for the surveillance of animal diseases. GIS, spatial analysis and remote sensing provide valuable methods to collect and manage information for epidemiological surveys. Spatial patterns and trends of disease can be correlated with climatic and environmental information, thus contributing to a better understanding of the links between disease processes and explanatory spatial variables. Until recently, these tools were underexploited in the field of veterinary public health, due to the prohibitive cost of hardware and the complexity of GIS software that required a high level of expertise. The revolutionary developments in computer performance of the last decade have not only reduced the costs of equipment but have made available easy-to-use Web-based software which in turn have meant that GIS are more widely accessible by veterinary services at all levels. At the same time, the increased awareness of the possibilities offered by these tools has created new opportunities for decision-makers to enhance their planning, analysis and monitoring capabilities. These technologies offer a new way of sharing and accessing spatial and non-spatial data across groups and institutions. The series of papers included in this compilation aim to: - define the state of the art in the use of GIS in veterinary activities - identify priority needs in the development of new GIS tools at the international level for the surveillance of animal diseases and zoonoses - define practical proposals for their implementation. The topics addressed are presented in the following order in this book: - importance of GIS for the monitoring of animal diseases and zoonoses - GIS application in surveillance activities - spatial analysis in veterinary epidemiology - data collection and remote

Techniques for Representation of Regional Clusters in Geographical In-formation Systems

Directory of Open Access Journals (Sweden)

Adriana REVEIU

2011-01-01

Full Text Available This paper provides an overview of visualization techniques adapted for regional clusters presentation in Geographic Information Systems. Clusters are groups of companies and insti-tutions co-located in a specific geographic region and linked by interdependencies in providing a related group of products and services. The regional clusters can be visualized by projecting the data into two-dimensional space or using parallel coordinates. Cluster membership is usually represented by different colours or by dividing clusters into several panels of a grille display. Taking into consideration regional clusters requirements and the multilevel administrative division of the Romania’s territory, I used two cartograms: NUTS2- regions and NUTS3- counties, to illustrate the tools for regional clusters representation.

Geographic information systems, remote sensing, and spatial analysis activities in Texas, 2002-07

Science.gov (United States)

Pearson, D.K.; Gary, R.H.; Wilson, Z.D.

2007-01-01

Geographic information system (GIS) technology has become an important tool for scientific investigation, resource management, and environmental planning. A GIS is a computer-aided system capable of collecting, storing, analyzing, and displaying spatially referenced digital data. GIS technology is particularly useful when analyzing a wide variety of spatial data such as with remote sensing and spatial analysis. Remote sensing involves collecting remotely sensed data, such as satellite imagery, aerial photography, or radar images, and analyzing the data to gather information or investigate trends about the environment or the Earth's surface. Spatial analysis combines remotely sensed, thematic, statistical, quantitative, and geographical data through overlay, modeling, and other analytical techniques to investigate specific research questions. It is the combination of data formats and analysis techniques that has made GIS an essential tool in scientific investigations. This document presents information about the technical capabilities and project activities of the U.S. Geological Survey (USGS) Texas Water Science Center (TWSC) GIS Workgroup from 2002 through 2007.

A database paradigm for the management of DICOM-RT structure sets using a geographic information system

International Nuclear Information System (INIS)

Shao, Weber; Kupelian, Patrick A; Wang, Jason; Low, Daniel A; Ruan, Dan

2014-01-01

We devise a paradigm for representing the DICOM-RT structure sets in a database management system, in such way that secondary calculations of geometric information can be performed quickly from the existing contour definitions. The implementation of this paradigm is achieved using the PostgreSQL database system and the PostGIS extension, a geographic information system commonly used for encoding geographical map data. The proposed paradigm eliminates the overhead of retrieving large data records from the database, as well as the need to implement various numerical and data parsing routines, when additional information related to the geometry of the anatomy is desired.

A database paradigm for the management of DICOM-RT structure sets using a geographic information system

Science.gov (United States)

Shao, Weber; Kupelian, Patrick A.; Wang, Jason; Low, Daniel A.; Ruan, Dan

2014-03-01

We devise a paradigm for representing the DICOM-RT structure sets in a database management system, in such way that secondary calculations of geometric information can be performed quickly from the existing contour definitions. The implementation of this paradigm is achieved using the PostgreSQL database system and the PostGIS extension, a geographic information system commonly used for encoding geographical map data. The proposed paradigm eliminates the overhead of retrieving large data records from the database, as well as the need to implement various numerical and data parsing routines, when additional information related to the geometry of the anatomy is desired.

2010 VA Information Technologies Agency (VITA)/VA Geographic Information Network (VGIN) Lidar: Eastern Shore, VA (Accomack and Northampton Counties)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The Virginia Geographic Information Network (VGIN) contracted with Sanborn to provide LiDAR mapping services for Accomack and Northampton counties on the eastern...

Geographic Ontologies, Gazetteers and Multilingualism

Directory of Open Access Journals (Sweden)

Robert Laurini

2015-01-01

Full Text Available Different languages imply different visions of space, so that terminologies are different in geographic ontologies. In addition to their geometric shapes, geographic features have names, sometimes different in diverse languages. In addition, the role of gazetteers, as dictionaries of place names (toponyms, is to maintain relations between place names and location. The scope of geographic information retrieval is to search for geographic information not against a database, but against the whole Internet: but the Internet stores information in different languages, and it is of paramount importance not to remain stuck to a unique language. In this paper, our first step is to clarify the links between geographic objects as computer representations of geographic features, ontologies and gazetteers designed in various languages. Then, we propose some inference rules for matching not only types, but also relations in geographic ontologies with the assistance of gazetteers.

Guidelines for Using Building Information Modeling for Energy Analysis of Buildings

Directory of Open Access Journals (Sweden)

Thomas Reeves

2015-12-01

Full Text Available Building energy modeling (BEM, a subset of building information modeling (BIM, integrates energy analysis into the design, construction, and operation and maintenance of buildings. As there are various existing BEM tools available, there is a need to evaluate the utility of these tools in various phases of the building lifecycle. The goal of this research was to develop guidelines for evaluation and selection of BEM tools to be used in particular building lifecycle phases. The objectives of this research were to: (1 Evaluate existing BEM tools; (2 Illustrate the application of the three BEM tools; (3 Re-evaluate the three BEM tools; and (4 Develop guidelines for evaluation, selection and application of BEM tools in the design, construction and operation/maintenance phases of buildings. Twelve BEM tools were initially evaluated using four criteria: interoperability, usability, available inputs, and available outputs. Each of the top three BEM tools selected based on this initial evaluation was used in a case study to simulate and evaluate energy usage, daylighting performance, and natural ventilation for two academic buildings (LEED-certified and non-LEED-certified. The results of the case study were used to re-evaluate the three BEM tools using the initial criteria with addition of the two new criteria (speed and accuracy, and to develop guidelines for evaluating and selecting BEM tools to analyze building energy performance. The major contribution of this research is the development of these guidelines that can help potential BEM users to identify the most appropriate BEM tool for application in particular building lifecycle phases.

Use of Geographic Information Systems for Planning HIV Prevention Interventions for High-Risk Youths

Science.gov (United States)

Geanuracos, Catherine G.; Cunningham, Shayna D.; Weiss, George; Forte, Draco; Henry Reid, Lisa M.; Ellen, Jonathan M.

2007-01-01

Geographic information system (GIS) analysis is an emerging tool for public health intervention planning. Connect to Protect, a researcher–community collaboration working in 15 cities to reduce HIV infection among youths, developed GIS databases of local health, crime, and demographic data to evaluate the geographic epidemiology of sexually transmitted infections and HIV risk among adolescents. We describe the process and problems of data acquisition, analysis, and mapping in the development of structural interventions, demonstrating how program planners can use this technology to inform and improve planning decisions. The Connect to Protect project’s experience suggests strategies for incorporating public data and GIS technology into the next generation of public health interventions. PMID:17901452

A Volunteered Geographic Information Framework to Enable Bottom-Up Disaster Management Platforms

Directory of Open Access Journals (Sweden)

Mohammad Ebrahim Poorazizi

2015-08-01

Full Text Available Recent disasters, such as the 2010 Haiti earthquake, have drawn attention to the potential role of citizens as active information producers. By using location-aware devices such as smartphones to collect geographic information in the form of geo-tagged text, photos, or videos, and sharing this information through online social media, such as Twitter, citizens create Volunteered Geographic Information (VGI. To effectively use this information for disaster management, we developed a VGI framework for the discovery of VGI. This framework consists of four components: (i a VGI brokering module to provide a standard service interface to retrieve VGI from multiple resources based on spatial, temporal, and semantic parameters; (ii a VGI quality control component, which employs semantic filtering and cross-referencing techniques to evaluate VGI; (iii a VGI publisher module, which uses a service-based delivery mechanism to disseminate VGI, and (iv a VGI discovery component to locate, browse, and query metadata about available VGI datasets. In a case study we employed a FOSS (Free and Open Source Software strategy, open standards/specifications, and free/open data to show the utility of the framework. We demonstrate that the framework can facilitate data discovery for disaster management. The addition of quality metrics and a single aggregated source of relevant crisis VGI will allow users to make informed policy choices that could save lives, meet basic humanitarian needs earlier, and perhaps limit environmental and economic damage.

Joint Service Common Operating Environment (COE) Common Geographic Information System functional requirements

Energy Technology Data Exchange (ETDEWEB)

Meitzler, W.D.

1992-06-01

In the context of this document and COE, the Geographic Information Systems (GIS) are decision support systems involving the integration of spatially referenced data in a problem solving environment. They are digital computer systems for capturing, processing, managing, displaying, modeling, and analyzing geographically referenced spatial data which are described by attribute data and location. The ability to perform spatial analysis and the ability to combine two or more data sets to create new spatial information differentiates a GIS from other computer mapping systems. While the CCGIS allows for data editing and input, its primary purpose is not to prepare data, but rather to manipulate, analyte, and clarify it. The CCGIS defined herein provides GIS services and resources including the spatial and map related functionality common to all subsystems contained within the COE suite of C4I systems. The CCGIS, which is an integral component of the COE concept, relies on the other COE standard components to provide the definition for other support computing services required.

Development and implementation of an HIV/AIDS trials management system: a geographical information systems approach

CSIR Research Space (South Africa)

Busgeeth, K

2008-01-01

Full Text Available of randomised and clinically controlled trials of HIV/AIDS interventions can provide invaluable information to decision-making processes. Using the newly emerging geographical information systems (GIS) technology, researchers have developed a tool which assists...

The application of geographic information system to radiological and nuclear emergency monitoring

International Nuclear Information System (INIS)

Sadaniowski, I.V.; Rodriguez, M.; Rojas, C.A.; Jordan, O.D.

2010-01-01

The Geographic Information System (GIS) implementation for the preparation and response in case of to radiological and nuclear emergencies is being developed in the Emergency Control Center of the Argentina Nuclear Regulatory Authority, since many years ago. Additionals features have been incorporated such as integration with the results of radiological monitoring, improving and expanding its benefits both in the preparation stage and during the work of emergency response. This paper shows the specific application of GIS to radiological monitoring in case of emergency situations such as during the search of orphan sources and the characterization of geographic context around nuclear power plants and atomic centers. The GIS provides essential data cartographic for the monitoring with sophisticated detectors, to integrate with the information received with infrastructure, urban and rural population maps, physical features of the place, satellite images, etc. The monitoring results are analyzed and compared with relevant information for decision making during the response, like evacuation routes, affected population, security forces in the area, radiological characterization, application of protective actions, hospitals, schools, etc. These two integrated tools improve preparedness and response system in case of radiological or nuclear emergency. (authors) [es

Geographic information system in marine biology: Way for sustainable utilization of living resources

Digital Repository Service at National Institute of Oceanography (India)

Chavan, V.S.; Sreepada, R.A.

Sustainable utilization of aquatic living resources needs accurate assessment. This stress the need for use of Geographic Information System (GIS). In the recent past interest has been generated for use of GIS in various areas of biological...

Transportation Routing Analysis Geographic Information System -- TRAGIS, progress on improving a routing tool

International Nuclear Information System (INIS)

Johnson, P.E.; Lester, P.B.

1998-05-01

The Transportation Routing Analysis Geographic Information System (TRAGIS) model provides a useful tool to calculate and analyze transportation routes for radioactive materials within the continental US. This paper outlines some of the features available in this model

FOSS4G AS A KEY BUILDING BLOCK FOR CASE-BASED LEARNING IN GEOGRAPHIC INFORMATION EDUCATION

Directory of Open Access Journals (Sweden)

M. Minghini

2017-07-01

Full Text Available In the sector of Geographic Information (GI there is a gap between the education and training currently being offered by European universities and the knowledge and skills required by enterprises and public authorities. New forms of collaboration based on innovative methods are needed to cope with the challenges derived from the fast technological developments in the geospatial and ICT field. This paper presents the approach and the first findings of the EU Erasmus+ project giCASES – Creating a University-Enterprise Alliance for a Spatially Enabled Society (2016–2018 which addresses this challenge by introducing new methods for case-based and collaborative learning, and for the co-creation, management and sharing of knowledge between universities and enterprises. The aim of the project is to develop new training material and create innovative, multi-disciplinary learning processes based on real-world case studies (case-based learning. The paper focuses on the methodological approach developed during the first half of the project, and presents the 6 case studies where this approach will be tested during the second half. Despite the diversity of application domains (indoor mapping, environmental hazards, e-Government, utility networks, energy saving policies, and forestry, the case studies are all relevant to open source software and FOSS4G technologies will play a key role in their implementation, thus demonstrating their matureness and flexibility not only as GI teaching tools at the universities, but also as powerful means to develop innovative new services at the companies.

JEDDAH HISTORICAL BUILDING INFORMATION MODELING "JHBIM" OLD JEDDAH – SAUDI ARABIA

Directory of Open Access Journals (Sweden)

A. Baik

2013-07-01

Full Text Available The historic city of Jeddah faces serious issues in the conservation, documentation and recording of its valuable building stock. Terrestrial Laser Scanning and Architectural Photogrammetry have already been used in many Heritage sites in the world. The integration of heritage recording and Building Information Modelling (BIM has been introduced as HBIM and is now a method to document and manage these buildings. In the last decade many traditional surveying methods were used to record the buildings in Old Jeddah. However, these methods take a long time, can sometimes provide unreliable information and often lack completeness. This paper will look at another approach for heritage recording by using the Jeddah Historical Building Information Modelling (JHBIM.

Hospital distribution in a metropolitan city: assessment by a geographical information system grid modelling approach

Directory of Open Access Journals (Sweden)

Kwang-Soo Lee

2014-05-01

Full Text Available Grid models were used to assess urban hospital distribution in Seoul, the capital of South Korea. A geographical information system (GIS based analytical model was developed and applied to assess the situation in a metropolitan area with a population exceeding 10 million. Secondary data for this analysis were obtained from multiple sources: the Korean Statistical Information Service, the Korean Hospital Association and the Statistical Geographical Information System. A grid of cells measuring 1 × 1 km was superimposed on the city map and a set of variables related to population, economy, mobility and housing were identified and measured for each cell. Socio-demographic variables were included to reflect the characteristics of each area. Analytical models were then developed using GIS software with the number of hospitals as the dependent variable. Applying multiple linear regression and geographically weighted regression models, three factors (highway and major arterial road areas; number of subway entrances; and row house areas were statistically significant in explaining the variance of hospital distribution for each cell. The overall results show that GIS is a useful tool for analysing and understanding location strategies. This approach appears a useful source of information for decision-makers concerned with the distribution of hospitals and other health care centres in a city.

Role of satellite remote sensing in the geographic information economics in France

Science.gov (United States)

Denégre, Jean

In national and international economics, geographic information plays a role which is generally acknowledged to be important but which is however, difficult to assess quantitatively, its applications being rather miscellaneous and indirect. Computer graphics and telecommunications increae that importance still more and justify many investments and research into new cartographic forms. As part of its responsibility for participating in the promotion of those developments, by taking into account needs expressed by public or private users, the National Council for Geographic Information (C.N.I.G.) has undertaken a general evaluation of the economic and social utility of geographic information in France. The study involves an estimation of the cost of production and research activities, which are probably about 0.1% of the Cross National Product—similar to many other countries. It also devised a method of estimating "cost/advantage" ratios applicable to these "intangible" benefits. Within that framework, remote sensing emphasizes particular aspects related both to the increase of economic performances in cartographic production and to the advent of new products and new ways of utilization. A review of some significant sectors shows effective earnings of about 10-20%, or even 50% or 100% of the costs, and these are doubtless much greater for the efficacy in the exploitation of products. Finally, many applications, entirely new result from extensions in various fields which would have been impossible without remote sensing: here the "cost advantage" ratio cannot even be compared with previous processes. Studies were undertaken in parallel for defining different types of products derived from satellite imagery, as well as those domains where development effort is required in order to make new advances.

Application of a geographic information system for radiologic emergency response

International Nuclear Information System (INIS)

Best, R.G.; Doyle, J.F.

1995-01-01

A geographic information system (GIS) is a multifunctional analytical tool that can be used to compile available data and derive information. A GIS is a computerized database management system for the capture, storage, retrieval, analysis, and display of spatial data. Maps are the most common type of spatial data, but any type of data that can be referenced by an x-y location or geographic coordinate can be used in a GIS. In a radiological emergency, it is critical that data of all types be rapidly compiled into a common format in order to make accurate observations and informed decisions. Developing a baseline GIS for nuclear facilities would offer a significant incentive for all organizations to contribute to and utilize this powerful data management tool. The system being developed could integrate all elements of emergency planning, from the initial protective actions based on models through the emergency monitoring phase, and finally ending with the complex reentry and recovery phase. Within the Federal Radiological Monitoring and Assessment Center (FRMAC), there is a continuing effort to improve the data management and communication process. To demonstrate the potential of GIS for emergency response, the system has been utilized in interagency FRMAC exercises. An interactive GIS system has been deployed and used to analyze the available spatial data to help determine the impact of a hypothetical radiological release and to develop mitigation plans. For this application, both hardcopy and real-time spatial displays were generated with the GIS. Composite maps with different sizes, scales, and themes were produced to support the exercises

The Design of Data Disaster Recovery of National Fundamental Geographic Information System

Science.gov (United States)

Zhai, Y.; Chen, J.; Liu, L.; Liu, J.

2014-04-01

With the development of information technology, data security of information system is facing more and more challenges. The geographic information of surveying and mapping is fundamental and strategic resource, which is applied in all areas of national economic, defence and social development. It is especially vital to national and social interests when such classified geographic information is directly concerning Chinese sovereignty. Several urgent problems that needs to be resolved for surveying and mapping are how to do well in mass data storage and backup, establishing and improving the disaster backup system especially after sudden natural calamity accident, and ensuring all sectors rapidly restored on information system will operate correctly. For overcoming various disaster risks, protect the security of data and reduce the impact of the disaster, it's no doubt the effective way is to analysis and research on the features of storage and management and security requirements, as well as to ensure that the design of data disaster recovery system suitable for the surveying and mapping. This article analyses the features of fundamental geographic information data and the requirements of storage management, three site disaster recovery system of DBMS plan based on the popular network, storage and backup, data replication and remote switch of application technologies. In LAN that synchronous replication between database management servers and the local storage of backup management systems, simultaneously, remote asynchronous data replication between local storage backup management systems and remote database management servers. The core of the system is resolving local disaster in the remote site, ensuring data security and business continuity of local site. This article focuses on the following points: background, the necessity of disaster recovery system, the analysis of the data achievements and data disaster recovery plan. Features of this program is to use a

Handbook on advances in remote sensing and geographic information systems paradigms and applications in forest landscape modeling

CERN Document Server

Favorskaya, Margarita N

2017-01-01

This book presents the latest advances in remote-sensing and geographic information systems and applications. It is divided into four parts, focusing on Airborne Light Detection and Ranging (LiDAR) and Optical Measurements of Forests; Individual Tree Modelling; Landscape Scene Modelling; and Forest Eco-system Modelling. Given the scope of its coverage, the book offers a valuable resource for students, researchers, practitioners, and educators interested in remote sensing and geographic information systems and applications.

Regional Geographic Information Systems of Health and Environmental Monitoring

Directory of Open Access Journals (Sweden)

Kurolap Semen A.

2016-12-01

Full Text Available The article describes a new scientific and methodological approach to designing geographic information systems of health and environmental monitoring for urban areas. Geographic information systems (GIS are analytical tools of the regional health and environmental monitoring; they are used for an integrated assessment of the environmental status of a large industrial centre or a part of it. The authors analyse the environmental situation in Voronezh, a major industrial city, located in the Central Black Earth Region with a population of more than 1 million people. The proposed research methodology is based on modern approaches to the assessment of health risks caused by adverse environmental conditions. The research work was implemented using a GIS and multicriteria probabilistic and statistical evaluation to identify cause-and-effect links, a combination of action and reaction, in the dichotomy ‘environmental factors — public health’. The analysis of the obtained statistical data confirmed an increase in childhood diseases in some areas of the city. Environmentally induced diseases include congenital malformations, tumors, endocrine and urogenital pathologies. The main factors having an adverse impact on health are emissions of carcinogens into the atmosphere and the negative impact of transport on the environment. The authors identify and characterize environmentally vulnerable parts of the city and developed principles of creating an automated system of health monitoring and control of environmental risks. The article offers a number of measures aimed at the reduction of environmental risks, better protection of public health and a more efficient environmental monitoring.

Renewable Energy Assessment of Bureau of Reclamation Land and Facilities Using Geographic Information Systems

Energy Technology Data Exchange (ETDEWEB)

Heimiller, D.; Haase, S.; Melius, J.

2013-05-01

This report summarizes results of geographic information system screening for solar and wind potential at select Bureau of Reclamation lands in the western United States. The study included both utility-scale and facility-scale potential. This study supplements information in the report titled Renewable Energy Assessment for the Bureau of Reclamation: Final Report.

2009 Capacity Building For Library and Information Centre

African Journals Online (AJOL)

discussed the features of digitized/virtual library and information centre and the need for capacity building especially in .... electronic library, virtual reality, digital library, community library .... architecture of the existing information system and ...

Using Geographic Information Systems for Exposure Assessment in Environmental Epidemiology Studies

OpenAIRE

Nuckols, John R.; Ward, Mary H.; Jarup, Lars

2004-01-01

Geographic information systems (GIS) are being used with increasing frequency in environmental epidemiology studies. Reported applications include locating the study population by geocoding addresses (assigning mapping coordinates), using proximity analysis of contaminant source as a surrogate for exposure, and integrating environmental monitoring data into the analysis of the health outcomes. Although most of these studies have been ecologic in design, some have used GIS in estimating enviro...

The role of Volunteered Geographic Information in participatory planning

DEFF Research Database (Denmark)

Knudsen, Anne-Marie Sanvig; Kahila, Maarit

2012-01-01

Due to developments in pervasive computing and the diffusion of digital media technologies, the amount of Volunteered Geographic Information (VGI) is rising rapidly. This paper investi- gates the potential of applying VGI to a participatory planning context. What kind of VGI was considered useful...... in the planning process and what were the strengths and weaknesses of the type of data collected? The paper looks at the methods and contents associated with VGI before looking at the implementation side of VGI. This is done by highlighting two case stu- dies. One which was carried out in a Danish context...

IMPROVING TRADITIONAL BUILDING REPAIR CONSTRUCTION QUALITY USING HISTORIC BUILDING INFORMATION MODELING CONCEPT

Directory of Open Access Journals (Sweden)

T. C. Wu

2013-07-01

Full Text Available In addition to the repair construction project following the repair principles contemplated by heritage experts, the construction process should be recorded and measured at any time for monitoring to ensure the quality of repair. The conventional construction record methods mostly depend on the localized shooting of 2D digital images coupled with text and table for illustration to achieve the purpose of monitoring. Such methods cannot fully and comprehensively record the 3D spatial relationships in the real world. Therefore, the construction records of traditional buildings are very important but cannot function due to technical limitations. This study applied the 3D laser scanning technology to establish a 3D point cloud model for the repair construction of historical buildings. It also broke down the detailed components of the 3D point cloud model by using the concept of the historic building information modeling, and established the 3D models of various components and their attribute data in the 3DGIS platform database. In the construction process, according to the time of completion of each stage as developed on the construction project, this study conducted the 3D laser scanning and database establishment for each stage, also applied 3DGIS spatial information and attribute information comparison and analysis to propose the analysis of differences in completion of various stages for improving the traditional building repair construction quality. This method helps to improve the quality of repair construction work of tangible cultural assets of the world. The established 3DGIS platform can be used as a power tool for subsequent management and maintenance.

Information delivery manuals to integrate building product information into design

DEFF Research Database (Denmark)

Berard, Ole Bengt; Karlshøj, Jan

2013-01-01

Despite continuing BIM progress, professionals in the AEC industry often lack the information they need to perform their work. Although this problem could be alleviated by information systems similar to those in other industries, companies struggle to model processes and information needs....... Traditional business process modeling languages often fail to completely cover all four perspectives. BuildingSMART has proposed Information Delivery Manuals (IDMs) to model and re-engineer processes that address the four perspectives through a collaborative methodology in order to standardize and implement...... in the manner necessary to develop information systems that support digital collaboration, workflows, and information exchange. Processes for information systems can be described from four perspectives: task sequence, information need, organizational interaction, and required logic for the specific task...

Application of geographic information system for radiologic emergency response

International Nuclear Information System (INIS)

Best, R.G.; Doyle, J.F.; Mueller, P.G.

1998-01-01

Comprehensive and timely radiological, cultural, and environmental data are required in order to make informed decisions during a radiological emergency. Within the Federal Radiological Monitoring and Assessment Center (FRMAC), there is a continuing effort to improve the data management and communication process. The most recent addition to this essential function has been the development of the Field Analysis System for Emergency Response (FASER). It is an integrated system with compatible digital image processing and Geographic Information System (GIS) capabilities. FASER is configured with commercially available off-the-shelf hardware and software components. To demonstrate the potential of the FASER system for radiological emergency response, the system has been utilized in interagency FRMAC exercises to analyze the available spatial data to help determine the impact of a hypothetical radiological release and to develop mitigation plans. (R.P.)

Information architecture for building digital library | Obuh ...

African Journals Online (AJOL)

The paper provided an overview of constituent elements of a digital library and explained the underlying information architecture and building blocks for a digital library. It specifically proffered meaning to the various elements or constituents of a digital library system. The paper took a look at the structure of information as a ...

Representations built from a true geographic database

DEFF Research Database (Denmark)

Bodum, Lars

2005-01-01

the whole world in 3d and with a spatial reference given by geographic coordinates. Built on top of this is a customised viewer, based on the Xith(Java) scenegraph. The viewer reads the objects directly from the database and solves the question about Level-Of-Detail on buildings, orientation in relation...... a representation based on geographic and geospatial principles. The system GRIFINOR, developed at 3DGI, Aalborg University, DK, is capable of creating this object-orientation and furthermore does this on top of a true Geographic database. A true Geographic database can be characterized as a database that can cover...

A Curriculum Framework for Geographical Information Science (GISc) Training at South African Universities

Science.gov (United States)

du Plessis, H.; van Niekerk, A.

2012-01-01

Geographical information science (GISc) is one of the fastest growing industries worldwide. Being a relatively new discipline, universities often provide training as part of geography, surveying, town planning, environmental and computer science programmes. This complicates professional accreditation assessments as the content, outcomes, extent…

The challenges of teaching geographical information systems integrated into the management of environment and natural resources

International Nuclear Information System (INIS)

Escobar, John; Betancur, Teresita; Palacio, Carlos

2008-01-01

The Geographic Information Systems, GIS, have the potential to become tools and methodologies for the solution of practical problems that involve complex spatial analyses, like the associated with natural resources and environmental management areas. The university, with its postgraduate programs, can help with the social adaptation processes for this new technology and can contribute to achieve the success sooner and with more effectiveness. To do so, three main challenges must be reached in the users of this technology: first, a spatial thinking second, skills to design and to make use of this instrument as supporting in environmental and natural resources analyses and finally, the identification of strategies to use this technology in projects and corporative surroundings. The Antioquia University in its Engineering Faculty (at first, in agreement with the Education Faculty)developed a Specialization in Environment and Geoinformatic. In this, the curriculum is worked in three moments (one for each challenge): first, a moment to building a common language and to adopting conceptual and technical instruments? second, a moment to put together instruments and methods and finally, a moment to make the practical application of the environmental management supported in the geo information spatial systems. This article gives account of this institutional experience.

Multi criteria evaluation for universal soil loss equation based on geographic information system

Science.gov (United States)

Purwaamijaya, I. M.

2018-05-01

The purpose of this research were to produce(l) a conceptual, functional model designed and implementation for universal soil loss equation (usle), (2) standard operational procedure for multi criteria evaluation of universal soil loss equation (usle) using geographic information system, (3) overlay land cover, slope, soil and rain fall layers to gain universal soil loss equation (usle) using multi criteria evaluation, (4) thematic map of universal soil loss equation (usle) in watershed, (5) attribute table of universal soil loss equation (usle) in watershed. Descriptive and formal correlation methods are used for this research. Cikapundung Watershed, Bandung, West Java, Indonesia was study location. This research was conducted on January 2016 to May 2016. A spatial analysis is used to superimposed land cover, slope, soil and rain layers become universal soil loss equation (usle). Multi criteria evaluation for universal soil loss equation (usle) using geographic information system could be used for conservation program.

Geographic information modeling of Econet of Northwestern Federal District territory on graph theory basis

Science.gov (United States)

Kopylova, N. S.; Bykova, A. A.; Beregovoy, D. N.

2018-05-01

Based on the landscape-geographical approach, a structural and logical scheme for the Northwestern Federal District Econet has been developed, which can be integrated into the federal and world ecological network in order to improve the environmental infrastructure of the region. The method of Northwestern Federal District Econet organization on the basis of graph theory by means of the Quantum GIS geographic information system is proposed as an effective mean of preserving and recreating the unique biodiversity of landscapes, regulation of the sphere of environmental protection.

Nationwide Hybrid Change Detection of Buildings

Science.gov (United States)

Hron, V.; Halounova, L.

2016-06-01

The Fundamental Base of Geographic Data of the Czech Republic (hereinafter FBGD) is a national 2D geodatabase at a 1:10,000 scale with more than 100 geographic objects. This paper describes the design of the permanent updating mechanism of buildings in FBGD. The proposed procedure belongs to the category of hybrid change detection (HCD) techniques which combine pixel-based and object-based evaluation. The main sources of information for HCD are cadastral information and bi-temporal vertical digital aerial photographs. These photographs have great information potential because they contain multispectral, position and also elevation information. Elevation information represents a digital surface model (DSM) which can be obtained using the image matching technique. Pixel-based evaluation of bi-temporal DSMs enables fast localization of places with potential building changes. These coarse results are subsequently classified through the object-based image analysis (OBIA) using spectral, textural and contextual features and GIS tools. The advantage of the two-stage evaluation is the pre-selection of locations where image segmentation (a computationally demanding part of OBIA) is performed. It is not necessary to apply image segmentation to the entire scene, but only to the surroundings of detected changes, which contributes to significantly faster processing and lower hardware requirements. The created technology is based on open-source software solutions that allow easy portability on multiple computers and parallelization of processing. This leads to significant savings of financial resources which can be expended on the further development of FBGD.

Building Information Modeling Comprehensive Overview

Directory of Open Access Journals (Sweden)

Sergey Kalinichuk

2015-07-01

Full Text Available The article is addressed to provide a comprehensive review on recently accelerated development of the Information Technology within project market such as industrial, engineering, procurement and construction. Author’s aim is to cover the last decades of the growth of the Information and Communication Technology in construction industry in particular Building Information Modeling and testifies that the problem of a choice of the effective project realization method not only has not lost its urgency, but has also transformed into one of the major condition of the intensive technology development. All of it has created a great impulse on shortening the project duration and has led to the development of various schedule compression techniques what becomes a focus of modern construction.

A fuzzy approach to a multiple criteria and Geographical Information System for decision support on suitable locations for biogas plants

DEFF Research Database (Denmark)

Franco, Camilo; Bojesen, Mikkel; Hougaard, Jens Leth

2015-01-01

The purpose of this paper is to model the multi-criteria decision problem of identifying the most suitable facility locations for biogas plants under an integrated decision support methodology. Here the Geographical Information System (GIS) is used for measuring the attributes of the alternatives...... according to a given set of criteria. Measurements are taken in interval form, expressing the natural imprecision of common data, and the Fuzzy Weighted Overlap Dominance (FWOD) procedure is applied for aggregating and exploiting this kind of data, obtaining suitability degrees for every alternative...... suitable sites for building biogas plants. We show that the FWOD relevance-ranking procedure can also be successfully applied over the outcomes of different decision makers, in case a unique social solution is required to exist. The proposed methodology can be used under an integrated decision support...

Management of Information and Infrastructure of Indigenous Community at Royal Belum State Park Using Geographical Information System: A Conceptual Design

Directory of Open Access Journals (Sweden)

Othman Zainon

2015-06-01

Full Text Available Abstract. Nowadays, an integrated location, descriptive inventory data and geographical information are required for a better decision making in Indigenous community management activities. The management system can improve productivity and to save time, money and man power. Conventional maps and Indigenous inventories on papers or spread sheet are lack of meeting these requirements which are not static and subjected to change rapidly. The Geographic Information Systems (GIS and Database Management (DBM System are capabilities and confined in manipulation of location and descriptive data, respectively. A GIS system is chosen in Management Information and Infrastructure of Indigenous Communities because its meets all the requirements that can help the authorities to managed the community. GIS able to manipulate location and descriptive data as well as the relationships between them are dynamic. This paper will discussed briefly the conceptual design of GIS activities and Indigenous community in Royal Belum State Park, Malaysia, then terminology and theoretical concepts of GIS, Indigenous community management and the link between them are reviewed. Keywords: Management, information, infrastructure, conceptual design, Indigenous community

Management of Information and Infrastructure of Indigenous Community at Royal Belum State Park Using Geographical Information System: A Conceptual Design

Directory of Open Access Journals (Sweden)

Othman Zainon

2015-07-01

Full Text Available Abstract. Nowadays, an integrated location, descriptive inventory data and geographical information are required for a better decision making in Indigenous community management activities. The management system can improve productivity and to save time, money and man power. Conventional maps and Indigenous inventories on papers or spread sheet are lack of meeting these requirements which are not static and subjected to change rapidly. The Geographic Information Systems (GIS and Database Management (DBM System are capabilities and confined in manipulation of location and descriptive data, respectively. A GIS system is chosen in Management Information and Infrastructure of Indigenous Communities because its meets all the requirements that can help the authorities to managed the community. GIS able to manipulate location and descriptive data as well as the relationships between them are dynamic. This paper will discussed briefly the conceptual design of GIS activities and Indigenous community in Royal Belum State Park, Malaysia, then terminology and theoretical concepts of GIS, Indigenous community management and the link between them are reviewed.Keywords:  Management, information, infrastructure, conceptual design, Indigenous community 

Development of hardwood seed zones for Tennessee using a geographic information system

Science.gov (United States)

Post, L.S.; Schlarbaum, S.E.; Van Manen, F.; Cecich, R.A.; Saxton, A.M.; Schneider, J.F.

2003-01-01

For species that have no or limited information on genetic variation and adaptability to nonnative sites, there is a need for seed collection guidelines based on biological, climatological, and/or geographical criteria. Twenty-eight hardwood species are currently grown for reforestation purposes at the East Tennessee State Nursery. The majority of these species have had no genetic testing to define guidelines for seed collection location and can be distributed to sites that have a very different environment than that of seed origin(s). Poor survival and/or growth may result if seedlings are not adapted to environmental conditions at the planting location. To address this problem, 30 yr of Tennessee county precipitation and minimum temperature data were analyzed and grouped using a centroid hierarchical cluster analysis. The weather data and elevational data were entered into a Geographic Information System (GIS) and separately layered over Bailey's Ecoregions to develop a seed zone system for Tennessee. The seed zones can be used as a practical guideline for collecting seeds to ensure that the resulting seedlings will be adapted to planting environments.

Geospatial database for heritage building conservation

Science.gov (United States)

Basir, W. N. F. W. A.; Setan, H.; Majid, Z.; Chong, A.

2014-02-01

Heritage buildings are icons from the past that exist in present time. Through heritage architecture, we can learn about economic issues and social activities of the past. Nowadays, heritage buildings are under threat from natural disaster, uncertain weather, pollution and others. In order to preserve this heritage for the future generation, recording and documenting of heritage buildings are required. With the development of information system and data collection technique, it is possible to create a 3D digital model. This 3D information plays an important role in recording and documenting heritage buildings. 3D modeling and virtual reality techniques have demonstrated the ability to visualize the real world in 3D. It can provide a better platform for communication and understanding of heritage building. Combining 3D modelling with technology of Geographic Information System (GIS) will create a database that can make various analyses about spatial data in the form of a 3D model. Objectives of this research are to determine the reliability of Terrestrial Laser Scanning (TLS) technique for data acquisition of heritage building and to develop a geospatial database for heritage building conservation purposes. The result from data acquisition will become a guideline for 3D model development. This 3D model will be exported to the GIS format in order to develop a database for heritage building conservation. In this database, requirements for heritage building conservation process are included. Through this research, a proper database for storing and documenting of the heritage building conservation data will be developed.

Geospatial database for heritage building conservation

International Nuclear Information System (INIS)

Basir, W N F W A; Setan, H; Majid, Z; Chong, A

2014-01-01

Heritage buildings are icons from the past that exist in present time. Through heritage architecture, we can learn about economic issues and social activities of the past. Nowadays, heritage buildings are under threat from natural disaster, uncertain weather, pollution and others. In order to preserve this heritage for the future generation, recording and documenting of heritage buildings are required. With the development of information system and data collection technique, it is possible to create a 3D digital model. This 3D information plays an important role in recording and documenting heritage buildings. 3D modeling and virtual reality techniques have demonstrated the ability to visualize the real world in 3D. It can provide a better platform for communication and understanding of heritage building. Combining 3D modelling with technology of Geographic Information System (GIS) will create a database that can make various analyses about spatial data in the form of a 3D model. Objectives of this research are to determine the reliability of Terrestrial Laser Scanning (TLS) technique for data acquisition of heritage building and to develop a geospatial database for heritage building conservation purposes. The result from data acquisition will become a guideline for 3D model development. This 3D model will be exported to the GIS format in order to develop a database for heritage building conservation. In this database, requirements for heritage building conservation process are included. Through this research, a proper database for storing and documenting of the heritage building conservation data will be developed

Information manager-2011-Vol 11

African Journals Online (AJOL)

Library _info_Sc_ 1

Application of Geographic Information System in Assessing Land use Changes In ... scientific investigations, resource management, and ... maps, GIS uses the processing power of the computer ... studies, geography, geology, planning, business, ... building etc). .... The coordinates were used .... Ibadan University Press.

Measuring ICT usage quality for information society building

DEFF Research Database (Denmark)

Schlichter, Bjarne Rerup; Danylchenko, Lesya

2014-01-01

In 2003 the World Summit on Information Society made a call for measuring the state of Information Society (IS) building between countries. The purpose of the measuring was to assess and compare IS practices around the globe as well as share best practices. A number of measurement tools have sinc...... levels of ICT usage for the purpose of better policy-making, while establishing an information society, is accentuated....... these indicators on the actual levels of Information and Communication Technology (ICT) usage off the country’s stakeholders. This paper analyses the most currently used indices for measuring the state of Information Society building from the perspective of their constituent indicators. Based on the analysis......, an alternative framework for IS measurement, addressing the important aspects of ICT usage quality, is developed based on data from EU member states. By applying the framework on measuring of ICT usage quality at Romania, Cyprus and Estonia, the usefulness is tested positive, and the need to evaluate the actual...

Gulf-Wide Information System, Environmental Sensitivity Index Parishes, Geographic NAD83, LDWF (2001) [esi_parish_LDWF_2001

Data.gov (United States)

Louisiana Geographic Information Center — This data set contains boundaries for parishes in coastal Louisiana. Feature-specific contact, type, and source information are stored in relational data tables...

Geographic information systems, remote sensing, and spatial analysis activities in Texas, 2008-09

Science.gov (United States)

,

2009-01-01

Geographic information system (GIS) technology has become an important tool for scientific investigation, resource management, and environmental planning. A GIS is a computer-aided system capable of collecting, storing, analyzing, and displaying spatially referenced digital data. GIS technology is useful for analyzing a wide variety of spatial data. Remote sensing involves collecting remotely sensed data, such as satellite imagery, aerial photography, or radar images, and analyzing the data to gather information or investigate trends about the environment or the Earth's surface. Spatial analysis combines remotely sensed, thematic, statistical, quantitative, and geographical data through overlay, modeling, and other analytical techniques to investigate specific research questions. It is the combination of data formats and analysis techniques that has made GIS an essential tool in scientific investigations. This fact sheet presents information about the technical capabilities and project activities of the U.S. Geological Survey (USGS) Texas Water Science Center (TWSC) GIS Workgroup during 2008 and 2009. After a summary of GIS Workgroup capabilities, brief descriptions of activities by project at the local and national levels are presented. Projects are grouped by the fiscal year (October-September 2008 or 2009) the project ends and include overviews, project images, and Internet links to additional project information and related publications or articles.

Quality of service management framework for dynamic chaining of geographic information services

Science.gov (United States)

Onchaga, Richard

2006-06-01

Dynamic chaining of geographic information services (geo-services) is gaining popularity as a new paradigm for evolving flexible geo-information systems and for providing on-demand access to geo-information. In dynamic chaining, disparate geo-services are discovered and composed at run time to yield more elaborate functionality and create value-added geo-information. Common approaches to service chaining discover and compose disparate geo-services based on the functional capability of individual geo-services. The primary concern of common approaches is thus the emergent behavior of the resulting composite geo-service. However, as geo-services become mundane and take on a greater and more strategic role in mission critical processes, deliverable quality of service (QoS) becomes an important concern. QoS concerns operational characteristics of a service that determine its utility in an application context. To address pertinent QoS requirements, a new approach to service chaining becomes necessary. In this paper we propose a QoS-aware chaining approach in which geo-services are discovered, composed and executed considering both functional and QoS requirements. We prescribe a QoS management framework that defines fundamental principles, concepts and mechanisms which can be applied to evolve an effective distributed computing platform for QoS-aware chaining of geo-services - the so-called geo-service infrastructure. The paper also defines an extensible QoS model for services delivered by dynamic compositions of geo-services. The process of orthophoto generation is used to demonstrate the applicability of the prescribed framework to service-oriented geographic information processing.

Gulf-Wide Information System, Louisiana Highways, Geographic NAD83, LDWF (2001) [esi_primaryroads_LDWF_2001

Data.gov (United States)

Louisiana Geographic Information Center — This dataset represents the state maintained primary and secondary road network of Louisiana. The dataset includes Interstates, US highways, and Louisiana State...

The geographical information systems in the development of the municipal aqueducts

International Nuclear Information System (INIS)

Sanchez Rubiano, Maritza del Pilar; Sanchez Ipia, Alber Hamersson

2006-01-01

The geographic information systems can be used at the water/wastewater systems in order to systematize and optimize these public services. This task should be accomplished by applying an organized method and many other technologies, including GPS, ground penetrating radar topography, photogrametry, remote sensing and field inspection for collecting information. The project planning while applying such kind of method must be accordingly managed with the needs, which could have been previously obtained by direct evaluation at the business organization domain. In the same way, the geographic database design and implementation must take into account this needs in order to reflect the water system reality. The project achievements can be defined in terms of the GIS effectiveness, completeness, and users thrust on it and the support granted to the water enterprise managers. The stages of application development (including analysis, design, development and implementation), such as the map and report of the water network elements at any street intersection, must be oriented to the intranet and optionally the Internet. This document is the result of the experience of a cadastral and geodetic engineer teamwork, which wants to expose the importance and benefits at the operative, administrative and economic level that GIS implementation and maintenance offers, in the Colombian water/waste-water systems

Louisiana State Soil Geographic, General Soil Map, Geographic NAD83, NWRC (1998) [statsgo_soils_NWRC_1998

Data.gov (United States)

Louisiana Geographic Information Center — This data set contains vector line map information. The vector data contain selected base categories of geographic features, and characteristics of these features,...

URBAN TRAFFIC ACCIDENT ANALYSIS BY USING GEOGRAPHIC INFORMATION SYSTEM

Directory of Open Access Journals (Sweden)

Meltem SAPLIOĞLU

2006-03-01

Full Text Available In recent years, traffic accidents that cause more social and economic losses than that of natural disasters,have become a national problem in Turkey. To solve this problem and to reduce the casualties, road safety programs are tried to be developed. It is necessary to develop the most effective measures with low investment cost due to limited budgets allocated to such road safety programs. The most important program is to determine dangerous locations of traffic accidents and to improve these sections from the road safety view point. New Technologies are driving a cycle of continuous improvement that causes rapid changes in the traffic engineering and any engineering services within it. It is obvious that this developed services will be the potential for forward-thinking engineering studies to take a more influence role. In this study, Geographic Information System (GIS was used to identify the hazardous locations of traffic accidents in Isparta. Isparta city map was digitized by using Arcinfo 7.21. Traffic accident reports occurred between 1998-2002 were obtained from Directory of Isparta Traffic Region and had been used to form the database. Topology was set up by using Crash Diagrams and Geographic Position Reference Systems. Tables are formed according to the obtained results and interpreted.

About External Geographic Information and Knowledge in Smart Cities

Science.gov (United States)

Laurinia, R.; Favetta, F.

2017-09-01

Any territory can easily be considered as an open system in which external effects can greatly influence its evolution in addition to inner dynamics. However, in practically all local authorities, their so-called geographic information or knowledge systems are bounded by the jurisdiction's limit, and therefore are closed systems. In this paper, we advocate the necessity not only to consider but also to include external influences within any GIS or GKS. Therefore, among external influences, we will consider beyond intra muros knowledge, extra muros knowledge divided in two categories, nearby neighboring knowledge, for instance located in an outer crown around the jurisdiction territory, but also farther knowledge for instance from technology watch. After having analyzed the semantics of borderlines, we suggest some element for the design of the crown and we analyze how the various components of a geographic knowledge base (objects, relations, ontologies, gazetteers, rules, etc.) can be integrated. Then some aspects regarding updating external knowledge are rapidly sketched. As a conclusion, we evoke the necessity of designing administrative protocols so that administration can negotiate the exchange of external knowledge bunches. In other words, this is an attempt to fully integrate the so-called Tobler's first law of geography.

ABOUT EXTERNAL GEOGRAPHIC INFORMATION AND KNOWLEDGE IN SMART CITIES

Directory of Open Access Journals (Sweden)

R. Laurinia

2017-09-01

Full Text Available Any territory can easily be considered as an open system in which external effects can greatly influence its evolution in addition to inner dynamics. However, in practically all local authorities, their so-called geographic information or knowledge systems are bounded by the jurisdiction’s limit, and therefore are closed systems. In this paper, we advocate the necessity not only to consider but also to include external influences within any GIS or GKS. Therefore, among external influences, we will consider beyond intra muros knowledge, extra muros knowledge divided in two categories, nearby neighboring knowledge, for instance located in an outer crown around the jurisdiction territory, but also farther knowledge for instance from technology watch. After having analyzed the semantics of borderlines, we suggest some element for the design of the crown and we analyze how the various components of a geographic knowledge base (objects, relations, ontologies, gazetteers, rules, etc. can be integrated. Then some aspects regarding updating external knowledge are rapidly sketched. As a conclusion, we evoke the necessity of designing administrative protocols so that administration can negotiate the exchange of external knowledge bunches. In other words, this is an attempt to fully integrate the so-called Tobler’s first law of geography.

Real-time Geographic Information System (GIS) for Monitoring the Area of Potential Water Level Using Rule Based System

Science.gov (United States)

Anugrah, Wirdah; Suryono; Suseno, Jatmiko Endro

2018-02-01

Management of water resources based on Geographic Information System can provide substantial benefits to water availability settings. Monitoring the potential water level is needed in the development sector, agriculture, energy and others. In this research is developed water resource information system using real-time Geographic Information System concept for monitoring the potential water level of web based area by applying rule based system method. GIS consists of hardware, software, and database. Based on the web-based GIS architecture, this study uses a set of computer that are connected to the network, run on the Apache web server and PHP programming language using MySQL database. The Ultrasound Wireless Sensor System is used as a water level data input. It also includes time and geographic location information. This GIS maps the five sensor locations. GIS is processed through a rule based system to determine the level of potential water level of the area. Water level monitoring information result can be displayed on thematic maps by overlaying more than one layer, and also generating information in the form of tables from the database, as well as graphs are based on the timing of events and the water level values.

Transportation Routing Analysis Geographic Information System (TRAGIS) User's Manual

Energy Technology Data Exchange (ETDEWEB)

Johnson, PE

2003-09-18

The Transportation Routing Analysis Geographic Information System (TRAGIS) model is used to calculate highway, rail, or waterway routes within the United States. TRAGIS is a client-server application with the user interface and map data files residing on the user's personal computer and the routing engine and network data files on a network server. The user's manual provides documentation on installation and the use of the many features of the model.

[Multicriteria evaluation of environmental risk exposure using a geographic information system in Argentina].

Science.gov (United States)

Pietri, Diana De; Dietrich, Patricia; Mayo, Patricia; Carcagno, Alejandro

2011-10-01

Develop a spatial model that includes environmental factors posing a health hazard, for application in the Matanza-Riachuelo River Basin (MRB) in Argentina. Multicriteria evaluation procedures were used with geographic information systems to obtain territorial zoning based on the degree of suitability for residence. Variables that characterize the habitability of housing and potential sources of basin pollution were geographically referenced. Health information was taken from the Risk Factor Survey (RFS) to measure the relative risk of living in unsuitable areas (exposed population) compared with suitable areas (unexposed population). Sixty percent of the MRB area is in suitable condition, a situation that affects 40% of residents. The rest of the population lives in unsuitable territory, and 6% live in the basin's most unsuitable conditions. Environmental conditions that are detrimental to health in the unsuitable areas became evident during the interviews through three of the pathologies considered: diarrheal diseases, respiratory diseases, and cancer. A regional analysis that provides valid information to support decisionmaking was obtained. Considering the basin as a unit of analysis allowed the use of a single protocol to undertake comprehensive measurement of the magnitude of risk and, thus, set priorities.

Application of remote sensing and Geographic Information Systems to ecosystem-based urban natural resource management

Science.gov (United States)

Xiaohui Zhang; George Ball; Eve Halper

2000-01-01

This paper presents an integrated system to support urban natural resource management. With the application of remote sensing (RS) and geographic information systems (GIS), the paper emphasizes the methodology of integrating information technology and a scientific basis to support ecosystem-based management. First, a systematic integration framework is developed and...

READY: a web-based geographical information system for enhanced flood resilience through raising awareness in citizens

Science.gov (United States)

Albano, R.; Sole, A.; Adamowski, J.

2015-07-01

As evidenced by the EU Floods Directive (2007/60/EC), flood management strategies in Europe have undergone a shift in focus in recent years. The goal of flood prevention using structural measures has been replaced by an emphasis on the management of flood risks using non-structural measures. One implication of this is that public authorities alone not only take responsibility for flood management. A broader range of stakeholders, who may personally experience the negative effects of flooding, also take on responsibility for protecting themselves. Therefore, it is vital that information concerning flood risks is conveyed to those who may be affected in order to facilitate the self-protection of citizens. Experience shows that problems persist even where efforts have been made to communicate flood risks. There is a need for the development of new tools that are able to rapidly disseminate flood-risk information to the general public. To be useful these tools must be able to present information relevant to the location of the user. Moreover, the content and design of the tool need to be adjusted to laypeople's needs. Dissemination and communication influence both people's access to and understanding of natural risk information. Such a tool could be a useful aid to effective management of flood risks. To address this gap, a web-based geographical information system (WebGIS) has been developed through the collaborative efforts of a group of scientists, hazard and risk analysts and managers, GIS analysts, system developers and communication designers. This tool, called "READY: Risk, Extreme Events, Adaptation, Defend Yourself", aims to enhance the general public knowledge of flood risk, making citizens more capable of responding appropriately during a flood event. The READY WebGIS has allowed for the visualization and easy querying of a complex hazard and risk database thanks to a high degree of interactivity and easily read maps. In this way, READY has enabled fast

Introduction of Building Information Modeling (BIM) Technologies in Construction

Science.gov (United States)

Milyutina, M. A.

2018-05-01

The issues of introduction of building information modeling (BIM) in construction industry are considered in this work. The advantages of this approach and perspectives of the transition to new design technologies, construction process management, and operation in the near future are stated. The importance of development of pilot projects that should identify the ways and means of verification of the regulatory and technical base, as well as economic indicators in the transition to Building Information Technologies in the construction, is noted.

Probabilistic Flood Mapping using Volunteered Geographical Information

Science.gov (United States)

Rivera, S. J.; Girons Lopez, M.; Seibert, J.; Minsker, B. S.

2016-12-01

Flood extent maps are widely used by decision makers and first responders to provide critical information that prevents economic impacts and the loss of human lives. These maps are usually obtained from sensory data and/or hydrologic models, which often have limited coverage in space and time. Recent developments in social media and communication technology have created a wealth of near-real-time, user-generated content during flood events in many urban areas, such as flooded locations, pictures of flooding extent and height, etc. These data could improve decision-making and response operations as events unfold. However, the integration of these data sources has been limited due to the need for methods that can extract and translate the data into useful information for decision-making. This study presents an approach that uses volunteer geographic information (VGI) and non-traditional data sources (i.e., Twitter, Flicker, YouTube, and 911 and 311 calls) to generate/update the flood extent maps in areas where no models and/or gauge data are operational. The approach combines Web-crawling and computer vision techniques to gather information about the location, extent, and water height of the flood from unstructured textual data, images, and videos. These estimates are then used to provide an updated flood extent map for areas surrounding the geo-coordinate of the VGI through the application of a Hydro Growing Region Algorithm (HGRA). HGRA combines hydrologic and image segmentation concepts to estimate a probabilistic flooding extent along the corresponding creeks. Results obtained for a case study in Austin, TX (i.e., 2015 Memorial Day flood) were comparable to those obtained by a calibrated hydrologic model and had good spatial correlation with flooding extents estimated by the Federal Emergency Management Agency (FEMA).

Automation technology using Geographic Information System (GIS)

Science.gov (United States)

Brooks, Cynthia L.

1994-01-01

Airport Surface Movement Area is but one of the actions taken to increase the capacity and safety of existing airport facilities. The System Integration Branch (SIB) has designed an integrated system consisting of an electronic moving display in the cockpit, and includes display of taxi routes which will warn controllers and pilots of the position of other traffic and warning information automatically. Although, this system has in test simulation proven to be accurate and helpful; the initial process of obtaining an airport layout of the taxi-routes and designing each of them is a very tedious and time-consuming process. Other methods of preparing the display maps are being researched. One such method is the use of the Geographical Information System (GIS). GIS is an integrated system of computer hardware and software linking topographical, demographic and other resource data that is being referenced. The software can support many areas of work with virtually unlimited information compatibility due to the system's open architecture. GIS will allow us to work faster with increased efficiency and accuracy while providing decision making capabilities. GIS is currently being used at the Langley Research Center with other applications and has been validated as an accurate system for that task. GIS usage for our task will involve digitizing aerial photographs of the topology for each taxi-runway and identifying each position according to its specific spatial coordinates. The information currently being used can be integrated with the GIS system, due to its ability to provide a wide variety of user interfaces. Much more research and data analysis will be needed before this technique will be used, however we are hopeful this will lead to better usage of man-power and technological capabilities for the future.

Frequency of damage by external hazards based on geographical information

Energy Technology Data Exchange (ETDEWEB)

Becker, G. [RISA Sicherheitsanalysen GmbH, Berlin (Germany); Camarinopoulos, A.; Karali, T. [ERRA, Athens (Greece); Camarinopoulos, L. [Piraeus Univ. (Greece); Schubert, B. [VENE, Hamburg (Germany)

2013-07-01

External explosions can significantly contribute to risk of damage for industrial plants. External explosions may origin from other plants in the neighborhood, which store and operate with explosive substances, or from transport of such substances on road, rail, or water. In all cases, some accident is a necessary condition for a hazard. Another probabilistic element is the probability of ignition. If transport causes the explosion, the location of the accident will influence the consequences. If deflagration is involved, ignition will not necessarily occur at the place of the accident, but a cloud of a combustible gas-air mixture may develop, which will ignite at some distance depending on wind velocity. In order to avoid unnecessarily pessimistic approaches, geographical information can be used in addition to local weather statistics. Geographical information systems provide map material for sites, roads, rail and rivers on a computer. This information can be used to find frequencies of damage based on numerical integration or on Monte Carlo simulation. A probabilistic model has been developed. It is based on: - A joint probability density function for wind direction and wind speed, which has been estimated from local weather statistics, - Frequency of hazards for neighboring plants and various types of traffic, - Statistics on the amounts and types of explosive materials, - The model has been implemented using one numerical integrations method and two variants of Monte Carlo method. Data has been collected and applied for a nuclear power plant in Northern Germany as an example. The method, however, can be used for any type of plant subject to external explosion hazards. In its present form, it makes use of design criteria specific for nuclear power plants, but these could be replaced by different criteria. (orig.)

Frequency of damage by external hazards based on geographical information

International Nuclear Information System (INIS)

Becker, G.; Camarinopoulos, A.; Karali, T.; Camarinopoulos, L.; Schubert, B.

2013-01-01

External explosions can significantly contribute to risk of damage for industrial plants. External explosions may origin from other plants in the neighborhood, which store and operate with explosive substances, or from transport of such substances on road, rail, or water. In all cases, some accident is a necessary condition for a hazard. Another probabilistic element is the probability of ignition. If transport causes the explosion, the location of the accident will influence the consequences. If deflagration is involved, ignition will not necessarily occur at the place of the accident, but a cloud of a combustible gas-air mixture may develop, which will ignite at some distance depending on wind velocity. In order to avoid unnecessarily pessimistic approaches, geographical information can be used in addition to local weather statistics. Geographical information systems provide map material for sites, roads, rail and rivers on a computer. This information can be used to find frequencies of damage based on numerical integration or on Monte Carlo simulation. A probabilistic model has been developed. It is based on: - A joint probability density function for wind direction and wind speed, which has been estimated from local weather statistics, - Frequency of hazards for neighboring plants and various types of traffic, - Statistics on the amounts and types of explosive materials, - The model has been implemented using one numerical integrations method and two variants of Monte Carlo method. Data has been collected and applied for a nuclear power plant in Northern Germany as an example. The method, however, can be used for any type of plant subject to external explosion hazards. In its present form, it makes use of design criteria specific for nuclear power plants, but these could be replaced by different criteria. (orig.)

Application of geographical information systems for the optimal location of a commercial network

Directory of Open Access Journals (Sweden)

Vicente Rodríguez

2017-07-01

Full Text Available Purpose - The purpose of this paper is to study the optimization of the geographical location of a network of points of sale, so that each retailer can have access to a potential geographic market. In addition, the authors study the importance of the distance variable in the commercial viability of a point of sale and a network of points of sale, analysing if the best location for each point (local optimum is always the best location for the whole (global optimum. Design/methodology/approach - Location-allocation models are applied using p-median algorithms and spatial competition maximization to analyse the actual journeys of 64,740 car buyers in 1240 postal codes using a geographic information system (GIS and geomarketing techniques. Findings - The models show that the pursuit of individual objectives by each concessionaire over the collective provides poorer results for the whole network of points of sale when compared to coordinated competition. The solutions provided by the models considering geographic and marketing criteria permit a reduction in the length of journeys made by the buyers. GIS allows the optimal control of market demand coverage through the collaborative strategies of the supplying retailers, in this case, car dealerships. Originality/value - The paper contributes to the joint research of geography and marketing from a theoretical and practical point of view. The main contribution is the use of information on actual buyer journeys for the optimal location of a network of points of sale. This research also contributes to the analysis of the correlation between the optimum local and optimum global locations of a commercial network and is a pioneering work in the application of these models to the automotive sector in the territorial area of the study.

Integrating geographical information and augmented reality techniques for mobile escape guidelines on nuclear accident sites

International Nuclear Information System (INIS)

Tsai, Ming-Kuan; Lee, Yung-Ching; Lu, Chung-Hsin; Chen, Mei-Hsin; Chou, Tien-Yin; Yau, Nie-Jia

2012-01-01

During nuclear accidents, when radioactive materials spread into the environment, the people in the affected areas should evacuate immediately. However, few information systems are available regarding escape guidelines for nuclear accidents. Therefore, this study constructs escape guidelines on mobile phones. This application is called Mobile Escape Guidelines (MEG) and adopts two techniques. One technique is the geographical information that offers multiple representations; the other is the augmented reality that provides semi-realistic information services. When this study tested the mobile escape guidelines, the results showed that this application was capable of identifying the correct locations of users, showing the escape routes, filtering geographical layers, and rapidly generating the relief reports. Users could evacuate from nuclear accident sites easily, even without relief personnel, since using slim devices to access the mobile escape guidelines is convenient. Overall, this study is a useful reference for a nuclear accident emergency response.

Gulf-Wide Information System, Environmental Sensitivity Index Database, Geographic NAD83, LDWF (2001) [esi_index_LDWF_2001

Data.gov (United States)

Louisiana Geographic Information Center — This data set contains polygons representing the boundaries of the USGS 1:100,000 topographic maps in the study area of the Louisiana Gulf-Wide Information System...

Knowledge management and information tools for building maintenance and facility management

CERN Document Server

Talamo, Cinzia

2015-01-01

This book describes the latest methods and tools for the management of information within facility management services and explains how it is possible to collect, organize, and use information over the life cycle of a building in order to optimize the integration of these services and improve the efficiency of processes. The coverage includes presentation and analysis of basic concepts, procedures, and international standards in the development and management of real estate inventories, building registries, and information systems for facility management. Models of strategic management are discussed and the functions and roles of the strategic management center, explained.  Detailed attention is also devoted to building information modeling (BIM) for facility management and potential interactions between information systems and BIM applications. Criteria for evaluating information system performance are identified, and guidelines of value in developing technical specifications for facility management service...

Standalone Mobile Application for Shipping Services Based on Geographic Information System and A-Star Algorithm

Science.gov (United States)

Gunawan, D.; Marzuki, I.; Candra, A.

2018-03-01

Geographic Information Systems (GIS) plays an essential role in shipping service related application. By utilizing GIS, the courier can find the route to deliver goods for its customer. This research proposes a standalone mobile application to provide the shortest route to the destinations by utilizing geographic information systems with A-Star algorithm. This application is intended to be used although the area has no Internet network available. The developed application can handle several drop off points then calculates the shortest route that passes through all the drop off points. According to the conducted testing, the number of drop off points that can be calculated is influenced by the specification of the smartphone. More destinations require more smartphone resources and time to process.

Building information models for astronomy projects

Science.gov (United States)

Ariño, Javier; Murga, Gaizka; Campo, Ramón; Eletxigerra, Iñigo; Ampuero, Pedro

2012-09-01

A Building Information Model is a digital representation of physical and functional characteristics of a building. BIMs represent the geometrical characteristics of the Building, but also properties like bills of quantities, definition of COTS components, status of material in the different stages of the project, project economic data, etc. The BIM methodology, which is well established in the Architecture Engineering and Construction (AEC) domain for conventional buildings, has been brought one step forward in its application for Astronomical/Scientific facilities. In these facilities steel/concrete structures have high dynamic and seismic requirements, M&E installations are complex and there is a large amount of special equipment and mechanisms involved as a fundamental part of the facility. The detail design definition is typically implemented by different design teams in specialized design software packages. In order to allow the coordinated work of different engineering teams, the overall model, and its associated engineering database, is progressively integrated using a coordination and roaming software which can be used before starting construction phase for checking interferences, planning the construction sequence, studying maintenance operation, reporting to the project office, etc. This integrated design & construction approach will allow to efficiently plan construction sequence (4D). This is a powerful tool to study and analyze in detail alternative construction sequences and ideally coordinate the work of different construction teams. In addition engineering, construction and operational database can be linked to the virtual model (6D), what gives to the end users a invaluable tool for the lifecycle management, as all the facility information can be easily accessed, added or replaced. This paper presents the BIM methodology as implemented by IDOM with the E-ELT and ATST Enclosures as application examples.

What Influences Geography Teachers' Usage of Geographic Information Systems? A Structural Equation Analysis

Science.gov (United States)

Lay, Jinn-Guey; Chi, Yu-Lin; Hsieh, Yeu-Sheng; Chen, Yu-Wen

2013-01-01

Understanding the usage of the geographic information system (GIS) among geography teachers is a crucial step in evaluating the current dissemination of GIS knowledge and skills in Taiwan's educational system. The primary contribution of this research is to further our understanding of the factors that affect teachers' GIS usage. The structural…

Key Technologies and Applications of Satellite and Sensor Web-coupled Real-time Dynamic Web Geographic Information System

Directory of Open Access Journals (Sweden)

CHEN Nengcheng

2017-10-01

Full Text Available The geo-spatial information service has failed to reflect the live status of spot and meet the needs of integrated monitoring and real-time information for a long time. To tackle the problems in observation sharing and integrated management of space-borne, air-borne, and ground-based platforms and efficient service of spatio-temporal information, an observation sharing model was proposed. The key technologies in real-time dynamic geographical information system (GIS including maximum spatio-temporal coverage-based optimal layout of earth-observation sensor Web, task-driven and feedback-based control, real-time access of streaming observations, dynamic simulation, warning and decision support were detailed. An real-time dynamic Web geographical information system (WebGIS named GeoSensor and its applications in sensing and management of spatio-temporal information of Yangtze River basin including navigation, flood prevention, and power generation were also introduced.

The Geographic Climate Information System Project (GEOCLIMA): Overview and preliminary results

Science.gov (United States)

Feidas, H.; Zanis, P.; Melas, D.; Vaitis, M.; Anadranistakis, E.; Symeonidis, P.; Pantelopoulos, S.

2012-04-01

The project GEOCLIMA aims at developing an integrated Geographic Information System (GIS) allowing the user to manage, analyze and visualize the information which is directly or indirectly related to climate and its future projections in Greece. The main components of the project are: a) collection and homogenization of climate and environmental related information, b) estimation of future climate change based on existing regional climate model (RCM) simulations as well as a supplementary high resolution (10 km x 10 km) simulation over the period 1961-2100 using RegCM3, c) compilation of an integrated uniform geographic database, and d) mapping of climate data, creation of digital thematic maps, and development of the integrated web GIS application. This paper provides an overview of the ongoing research efforts and preliminary results of the project. First, the trends in the annual and seasonal time series of precipitation and air temperature observations for all available stations in Greece are assessed. Then the set-up of the high resolution RCM simulation (10 km x 10 km) is discussed with respect to the selected convective scheme. Finally, the relationship of climatic variables with geophysical features over Greece such as altitude, location, distance from the sea, slope, aspect, distance from climatic barriers, land cover etc) is investigated, to support climate mapping. The research has been co-financed by the European Union (European Regional Development Fund) and Greek national funds through the Operational Program "Competitiveness and Entrepreneurship" of the National Strategic Reference Framework (NSRF) - Research Funding Program COOPERATION 2009.

A fuzzy approach to a multiple criteria and geographical information system for decision support on suitable locations for biogas plants

DEFF Research Database (Denmark)

Franco de los Rios, Camilo Andres; Bojesen, Mikkel; Hougaard, Jens Leth

The purpose of this paper is to model the multi-criteria decision problem of identifying the most suitable facility locations for biogas plants under an integrated decision support methodology. Here the Geographical Information System (GIS) is used for measuring the attributes of the alternatives...... according to a given set of criteria. Measurements are taken in interval form, expressing the natural imprecision of common data, and the Fuzzy Weighted Overlap Dominance (FWOD) procedure is applied for aggregating and exploiting this kind of data, obtaining suitability degrees for every alternative....... The estimation of criteria weights, which is necessary for applying the FWOD procedure, is done by means of the Analytical Hierarchy Process (AHP), such that a combined AHP-FWOD methodology allows identifying the more suitable sites for building biogas plants. We show that the FWOD relevance-ranking procedure...

Open-Source web-based geographical information system for health exposure assessment

Directory of Open Access Journals (Sweden)

Evans Barry

2012-01-01

Full Text Available Abstract This paper presents the design and development of an open source web-based Geographical Information System allowing users to visualise, customise and interact with spatial data within their web browser. The developed application shows that by using solely Open Source software it was possible to develop a customisable web based GIS application that provides functions necessary to convey health and environmental data to experts and non-experts alike without the requirement of proprietary software.

Open-Source web-based geographical information system for health exposure assessment

DEFF Research Database (Denmark)

Evans, Barry; Sabel, Clive E

2012-01-01

This paper presents the design and development of an open source web-based Geographical Information System allowing users to visualise, customise and interact with spatial data within their web browser. The developed application shows that by using solely Open Source software it was possible to d...... to develop a customisable web based GIS application that provides functions necessary to convey health and environmental data to experts and non-experts alike without the requirement of proprietary software....

Protocol to Manage Heritage-Building Interventions Using Heritage Building Information Modelling (HBIM

Directory of Open Access Journals (Sweden)

Isabel Jordan-Palomar

2018-03-01

Full Text Available The workflow in historic architecture projects presents problems related to the lack of clarity of processes, dispersion of information and the use of outdated tools. Different heritage organisations have showed interest in innovative methods to resolve those problems and improve cultural tourism for sustainable economic development. Building Information Modelling (BIM has emerged as a suitable computerised system for improving heritage management. Its application to historic buildings is named Historic BIM (HBIM. HBIM literature highlights the need for further research in terms of the overall processes of heritage projects, its practical implementation and a need for better cultural documentation. This work uses Design Science Research to develop a protocol to improve the workflow in heritage interdisciplinary projects. Research techniques used include documentary analysis, semi-structured interviews and focus groups. HBIM is proposed as a virtual model that will hold heritage data and will articulate processes. As a result, a simple and visual HBIM protocol was developed and applied in a real case study. The protocol was named BIMlegacy and it is divided into eight phases: building registration, determine intervention options, develop design for intervention, planning the physical intervention, physical intervention, handover, maintenance and culture dissemination. It contemplates all the stakeholders involved.

NATIONWIDE HYBRID CHANGE DETECTION OF BUILDINGS

Directory of Open Access Journals (Sweden)

V. Hron

2016-06-01

Full Text Available The Fundamental Base of Geographic Data of the Czech Republic (hereinafter FBGD is a national 2D geodatabase at a 1:10,000 scale with more than 100 geographic objects. This paper describes the design of the permanent updating mechanism of buildings in FBGD. The proposed procedure belongs to the category of hybrid change detection (HCD techniques which combine pixel-based and object-based evaluation. The main sources of information for HCD are cadastral information and bi-temporal vertical digital aerial photographs. These photographs have great information potential because they contain multispectral, position and also elevation information. Elevation information represents a digital surface model (DSM which can be obtained using the image matching technique. Pixel-based evaluation of bi-temporal DSMs enables fast localization of places with potential building changes. These coarse results are subsequently classified through the object-based image analysis (OBIA using spectral, textural and contextual features and GIS tools. The advantage of the two-stage evaluation is the pre-selection of locations where image segmentation (a computationally demanding part of OBIA is performed. It is not necessary to apply image segmentation to the entire scene, but only to the surroundings of detected changes, which contributes to significantly faster processing and lower hardware requirements. The created technology is based on open-source software solutions that allow easy portability on multiple computers and parallelization of processing. This leads to significant savings of financial resources which can be expended on the further development of FBGD.

Student Perspectives on the Teaching of Geographical Information Systems (GIS) in Geography Degrees

Science.gov (United States)

Seremet, Mehmet; Chalkley, Brian

2015-01-01

In an era when graduate employability is a key concern, the teaching of geographical information systems (GIS) has become a subject of considerable interest. This paper reports on a study of the GIS student learning experience using student survey data from six UK geography undergraduate programmes. The findings show that although students'…

Impacts of building information modeling on facility maintenance management

Energy Technology Data Exchange (ETDEWEB)

Ahamed, Shafee; Neelamkavil, Joseph; Canas, Roberto [Centre for Computer-assisted Construction Technologies, National Research Council of Canada, London, Ontario (Canada)

2010-07-01

Building information modeling (BIM) is a digital representation of the physical and functional properties of a building; it has been used by construction professionals for a long time and stakeholders are now using it in different aspects of the building lifecycle. This paper intends to present how BIM impacts the construction industry and how it can be used for facility maintenance management. The maintenance and operations of buildings are in most cases still managed through the use of drawings and spreadsheets although life cycle costs of a building are significantly higher than initial investment costs; thus, the use of BIM could help in achieving a higher efficiency and so important benefits. This study is part of an ongoing research project, the nD modeling project, which aims at predicting building energy consumption with better accuracy.

Intelligent use of buildings' energy information

Energy Technology Data Exchange (ETDEWEB)

Ala-Juusela, M., Email: mia.ala-juusela@vtt.fi

2012-06-15

The IntUBE project will increase the possibility of reaching the European Commission's energy efficiency goals by facilitating more efficient use of the existing building stock. IntUBE stands for Intelligent Use of Buildings' Energy Information. The results of the IntUBE-project are expected not only to enhance the comfort levels of building users, but also to reduce overall energy costs through better energy efficiency. The IntUBE project was a European cooperation between twelve partners from nine European countries and received funding from the European Commission. The project was implemented between May 2009 and April 2011. The IntUBE consortium spans key research partners from northern to southern Europe including SMEs committed to exploiting the results of the project. The project was coordinated by VTT. (orig.)

Determining the Effectiveness of Incorporating Geographic Information Into Vehicle Performance Algorithms

Energy Technology Data Exchange (ETDEWEB)

Sera White

2012-04-01

This thesis presents a research study using one year of driving data obtained from plug-in hybrid electric vehicles (PHEV) located in Sacramento and San Francisco, California to determine the effectiveness of incorporating geographic information into vehicle performance algorithms. Sacramento and San Francisco were chosen because of the availability of high resolution (1/9 arc second) digital elevation data. First, I present a method for obtaining instantaneous road slope, given a latitude and longitude, and introduce its use into common driving intensity algorithms. I show that for trips characterized by >40m of net elevation change (from key on to key off), the use of instantaneous road slope significantly changes the results of driving intensity calculations. For trips exhibiting elevation loss, algorithms ignoring road slope overestimated driving intensity by as much as 211 Wh/mile, while for trips exhibiting elevation gain these algorithms underestimated driving intensity by as much as 333 Wh/mile. Second, I describe and test an algorithm that incorporates vehicle route type into computations of city and highway fuel economy. Route type was determined by intersecting trip GPS points with ESRI StreetMap road types and assigning each trip as either city or highway route type according to whichever road type comprised the largest distance traveled. The fuel economy results produced by the geographic classification were compared to the fuel economy results produced by algorithms that assign route type based on average speed or driving style. Most results were within 1 mile per gallon ({approx}3%) of one another; the largest difference was 1.4 miles per gallon for charge depleting highway trips. The methods for acquiring and using geographic data introduced in this thesis will enable other vehicle technology researchers to incorporate geographic data into their research problems.

Integrating geographical information and augmented reality techniques for mobile escape guidelines on nuclear accident sites.

Science.gov (United States)

Tsai, Ming-Kuan; Lee, Yung-Ching; Lu, Chung-Hsin; Chen, Mei-Hsin; Chou, Tien-Yin; Yau, Nie-Jia

2012-07-01

During nuclear accidents, when radioactive materials spread into the environment, the people in the affected areas should evacuate immediately. However, few information systems are available regarding escape guidelines for nuclear accidents. Therefore, this study constructs escape guidelines on mobile phones. This application is called Mobile Escape Guidelines (MEG) and adopts two techniques. One technique is the geographical information that offers multiple representations; the other is the augmented reality that provides semi-realistic information services. When this study tested the mobile escape guidelines, the results showed that this application was capable of identifying the correct locations of users, showing the escape routes, filtering geographical layers, and rapidly generating the relief reports. Users could evacuate from nuclear accident sites easily, even without relief personnel, since using slim devices to access the mobile escape guidelines is convenient. Overall, this study is a useful reference for a nuclear accident emergency response. Copyright © 2012 Elsevier Ltd. All rights reserved.

The use of information systems to transform utilities and regulatory commissions: The application of geographic information systems

Energy Technology Data Exchange (ETDEWEB)

Wirick, D.W.; Montgomery, G.E.; Wagman, D.C.; Spiers, J.

1995-09-01

One technology that can assist utilities remain financially viable in competitive markets and help utilities and regulators to better serve the public is information technology. Because geography is an important part of an electric, natural gas, telecommunications, or water utility, computer-based Geographic Information Systems (GIS) and related Automated Mapping/Facilities Management systems are emerging as core technologies for managing an ever-expanding variety of formerly manual or paper-based tasks. This report focuses on GIS as an example of the types of information systems that can be used by utilities and regulatory commissions. Chapter 2 provides general information about information systems and effects of information on organizations; Chapter 3 explores the conversion of an organization to an information-based one; Chapters 4 and 5 set out GIS as an example of the use of information technologies to transform the operations of utilities and commissions; Chapter 6 describes the use of GIS and other information systems for organizational reengineering efforts; and Chapter 7 examines the regulatory treatment of information systems.

Towards democracy in spatial planning through spatial information built by communities: The investigation of spatial information built by citizens from participatory mapping to volunteered geographic information in Indonesia

Science.gov (United States)

Yudono, Adipandang

2017-06-01

Recently, crowd-sourced information is used to produce and improve collective knowledge and community capacity building. Triggered by broadening and expanding access to the Internet and cellular telephones, the utilisation of crowd-sourcing for policy advocacy, e-government and e-participation has increased globally [1]. Crowd-sourced information can conceivably support government’s or general social initiatives to inform, counsel, and cooperate, by engaging subjects and empowering decentralisation and democratization [2]. Crowd-sourcing has turned into a major technique for interactive mapping initiatives by urban or rural community because of its capability to incorporate a wide range of data. Continuously accumulated spatial data can be sorted, layered, and envisioned in ways that even beginners can comprehend with ease. Interactive spatial visualization has the possibility to be a useful democratic planning tool to empower citizens participating in spatial data provision and sharing in government programmes. Since the global emergence of World Wide Web (WWW) technology, the interaction between information providers and users has increased. Local communities are able to produce and share spatial data to produce web interfaces with territorial information in mapping application programming interfaces (APIs) public, such as Google maps, OSM and Wikimapia [3][4][5]. In terms of the democratic spatial planning action, Volunteered Geographic Information (VGI) is considered an effective voluntary method of helping people feel comfortable with the technology and other co-participants in order to shape coalitions of local knowledge. This paper has aim to investigate ‘How is spatial data created by citizens used in Indonesia?’ by discussing the characteristics of spatial data usage by citizens to support spatial policy formulation, starting with the history of participatory mapping to current VGI development in Indonesia.

Gulf-Wide Information System, Environmental Sensitivity Index Cities Database, Geographic NAD83, LDWF (2001) [esi_cities_LDWF_2001

Data.gov (United States)

Louisiana Geographic Information Center — This data set contains boundaries for municipal areas in coastal Louisiana. Feature-specific contact, type, and source information are stored in relational data...

GEOGRAPHIC INFORMATION SYSTEM AND REMOTE SENSING BASED DISASTER MANAGEMENT AND DECISION SUPPORT PLATFORM: AYDES

OpenAIRE

Keskin, İ.; Akbaba, N.; Tosun, M.; Tüfekçi, M. K.; Bulut, D.; Avcı, F.; Gökçe, O.

2018-01-01

The accelerated developments in information technology in recent years, increased the amount of usage of Geographic Information Systems (GIS) and Remote Sensing (RS) in disaster management considerably and the access from mobile and web-based platforms to continuous, accurate and sufficient data needed for decision-making became easier accordingly. The Disaster Management and Decision Support System (AYDES) has been developed with the purpose of managing the disaster and emergency manageme...

Russian and Foreign Experience of Integration of Agent-Based Models and Geographic Information Systems

Directory of Open Access Journals (Sweden)

Konstantin Anatol’evich Gulin

2016-11-01

Full Text Available The article provides an overview of the mechanisms of integration of agent-based models and GIS technology developed by Russian and foreign researchers. The basic framework of the article is based on critical analysis of domestic and foreign literature (monographs, scientific articles. The study is based on the application of universal scientific research methods: system approach, analysis and synthesis, classification, systematization and grouping, generalization and comparison. The article presents theoretical and methodological bases of integration of agent-based models and geographic information systems. The concept and essence of agent-based models are explained; their main advantages (compared to other modeling methods are identified. The paper characterizes the operating environment of agents as a key concept in the theory of agent-based modeling. It is shown that geographic information systems have a wide range of information resources for calculations, searching, modeling of the real world in various aspects, acting as an effective tool for displaying the agents’ operating environment and allowing to bring the model as close as possible to the real conditions. The authors also focus on a wide range of possibilities for various researches in different spatial and temporal contexts. Comparative analysis of platforms supporting the integration of agent-based models and geographic information systems has been carried out. The authors give examples of complex socio-economic models: the model of a creative city, humanitarian assistance model. In the absence of standards for research results description, the authors focus on the models’ elements such as the characteristics of the agents and their operation environment, agents’ behavior, rules of interaction between the agents and the external environment. The paper describes the possibilities and prospects of implementing these models

From Point Clouds to Building Information Models: 3D Semi-Automatic Reconstruction of Indoors of Existing Buildings

Directory of Open Access Journals (Sweden)

Hélène Macher

2017-10-01

Full Text Available The creation of as-built Building Information Models requires the acquisition of the as-is state of existing buildings. Laser scanners are widely used to achieve this goal since they permit to collect information about object geometry in form of point clouds and provide a large amount of accurate data in a very fast way and with a high level of details. Unfortunately, the scan-to-BIM (Building Information Model process remains currently largely a manual process which is time consuming and error-prone. In this paper, a semi-automatic approach is presented for the 3D reconstruction of indoors of existing buildings from point clouds. Several segmentations are performed so that point clouds corresponding to grounds, ceilings and walls are extracted. Based on these point clouds, walls and slabs of buildings are reconstructed and described in the IFC format in order to be integrated into BIM software. The assessment of the approach is proposed thanks to two datasets. The evaluation items are the degree of automation, the transferability of the approach and the geometric quality of results of the 3D reconstruction. Additionally, quality indexes are introduced to inspect the results in order to be able to detect potential errors of reconstruction.

77 FR 54889 - Proposed Information Collection; Comment Request; Report of Building or Zoning Permits Issued for...

Science.gov (United States)

2012-09-06

... (b) Housing Starts. Both are based on data from samples of permit-issuing places. These statistics... geographic data to monitor growth and plan for local services and to develop production and marketing plans..., Building Permits Survey. The Census Bureau produces statistics used to monitor activity in the large and...

Gulf-Wide Information System, Environmental Sensitivity Index Hydrography Database, Geographic NAD83, LDWF (2001) [esi_hydro_LDWF_2001

Data.gov (United States)

Louisiana Geographic Information Center — This data set contains arcs and polygons representing hydrography for coastal Louisiana. This data set comprises a portion of the Gulf-Wide Information System...

Gulf-Wide Information System, Environmental Sensitivity Index Managed Lands, Geographic NAD83, LDWF (2001) [esi_mgt_LDWF_2001

Data.gov (United States)

Louisiana Geographic Information Center — This data set contains boundaries for managed lands in coastal Louisiana. Feature-specific contact, type, and source information are stored in relational data tables...

Geographic Information System (GIS) capabilities in traffic accident information management: a qualitative approach.

Science.gov (United States)

Ahmadi, Maryam; Valinejadi, Ali; Goodarzi, Afshin; Safari, Ameneh; Hemmat, Morteza; Majdabadi, Hesamedin Askari; Mohammadi, Ali

2017-06-01

Traffic accidents are one of the more important national and international issues, and their consequences are important for the political, economical, and social level in a country. Management of traffic accident information requires information systems with analytical and accessibility capabilities to spatial and descriptive data. The aim of this study was to determine the capabilities of a Geographic Information System (GIS) in management of traffic accident information. This qualitative cross-sectional study was performed in 2016. In the first step, GIS capabilities were identified via literature retrieved from the Internet and based on the included criteria. Review of the literature was performed until data saturation was reached; a form was used to extract the capabilities. In the second step, study population were hospital managers, police, emergency, statisticians, and IT experts in trauma, emergency and police centers. Sampling was purposive. Data was collected using a questionnaire based on the first step data; validity and reliability were determined by content validity and Cronbach's alpha of 75%. Data was analyzed using the decision Delphi technique. GIS capabilities were identified in ten categories and 64 sub-categories. Import and process of spatial and descriptive data and so, analysis of this data were the most important capabilities of GIS in traffic accident information management. Storing and retrieving of descriptive and spatial data, providing statistical analysis in table, chart and zoning format, management of bad structure issues, determining the cost effectiveness of the decisions and prioritizing their implementation were the most important capabilities of GIS which can be efficient in the management of traffic accident information.

a Statistical Texture Feature for Building Collapse Information Extraction of SAR Image

Science.gov (United States)

Li, L.; Yang, H.; Chen, Q.; Liu, X.

2018-04-01

Synthetic Aperture Radar (SAR) has become one of the most important ways to extract post-disaster collapsed building information, due to its extreme versatility and almost all-weather, day-and-night working capability, etc. In view of the fact that the inherent statistical distribution of speckle in SAR images is not used to extract collapsed building information, this paper proposed a novel texture feature of statistical models of SAR images to extract the collapsed buildings. In the proposed feature, the texture parameter of G0 distribution from SAR images is used to reflect the uniformity of the target to extract the collapsed building. This feature not only considers the statistical distribution of SAR images, providing more accurate description of the object texture, but also is applied to extract collapsed building information of single-, dual- or full-polarization SAR data. The RADARSAT-2 data of Yushu earthquake which acquired on April 21, 2010 is used to present and analyze the performance of the proposed method. In addition, the applicability of this feature to SAR data with different polarizations is also analysed, which provides decision support for the data selection of collapsed building information extraction.

Utilizing Geographic Information Systems (GIS) to analyze geographic and demographic patterns related to forensic case recovery locations in Florida.

Science.gov (United States)

Kolpan, Katharine E; Warren, Michael

2017-12-01

This paper highlights how Geographic Information Systems (GIS) can be utilized to analyze biases and patterns related to physical and cultural geography in Florida. Using case recovery locations from the C. Addison Pound Human Identification Laboratory (CAPHIL), results indicate that the majority of CAPHIL cases are recovered from urban areas with medium to low population density and low rates of crime. The results also suggest that more accurate record keeping methods would enhance the data. Copyright © 2017 Elsevier B.V. All rights reserved.

Site-characterization information using LANDSAT satellite and other remote-sensing data: integration of remote-sensing data with geographic information systems. A case study in Pennsylvania

International Nuclear Information System (INIS)

Campbell, W.J.; Imhoff, M.L.; Robinson, J.; Gunther, F.; Boyd, R.; Anuta, M.

1983-06-01

The utility and cost effectiveness of incorporating digitized aircraft and satellite remote sensing data into a geographic information system for facility siting and environmental impact assessments was evaluated. This research focused on the evaluation of several types of multisource remotely sensed data representing a variety of spectral band widths and spatial resolution. High resolution aircraft photography, Landsat MSS, and 7 band Thematic Mapper Simulator (TMS) data were acquired, analyzed, and evaluated for their suitability as input to an operational geographic information system (GIS). 78 references, 59 figures, 74 tables

Gulf-Wide Information System, Environmental Sensitivity Index Polygons, Geographic NAD83, LDWF (2001) [esip_LDWF_2001

Data.gov (United States)

Louisiana Geographic Information Center — This data set contains polygons representing the Environmental Sensitivity Index (ESI) classification of coastal Louisiana. The ESI is a classification and ranking...

Composing Models of Geographic Physical Processes

Science.gov (United States)

Hofer, Barbara; Frank, Andrew U.

Processes are central for geographic information science; yet geographic information systems (GIS) lack capabilities to represent process related information. A prerequisite to including processes in GIS software is a general method to describe geographic processes independently of application disciplines. This paper presents such a method, namely a process description language. The vocabulary of the process description language is derived formally from mathematical models. Physical processes in geography can be described in two equivalent languages: partial differential equations or partial difference equations, where the latter can be shown graphically and used as a method for application specialists to enter their process models. The vocabulary of the process description language comprises components for describing the general behavior of prototypical geographic physical processes. These process components can be composed by basic models of geographic physical processes, which is shown by means of an example.

Application of 6D Building Information Model (6D BIM) for Business-storage Building in Slovenia

Science.gov (United States)

Pučko, Zoran; Vincek, Dražen; Štrukelj, Andrej; Šuman, Nataša

2017-10-01

The aim of this paper is to present an application of 6D building information modelling (6D BIM) on a real business-storage building in Slovenia. First, features of building maintenance in general are described according to the current Slovenian legislation, and also a general principle of BIM is given. After that, step-by-step activities for modelling 6D BIM are exposed, namely from Element list for maintenance, determination of their lifetime and service measures, cost analysing and time analysing to 6D BIM modelling. The presented 6D BIM model is designed in a unique way in which cost analysis is performed as 5D BIM model with linked data to use BIM Construction Project Management Software (Vico Office), integrated with 3D BIM model, whereas time analysis as 4D BIM model is carried out as non-linked data with the help of Excel (without connection to 3D BIM model). The paper is intended to serve as a guide to the building owners to prepare 6D BIM and to provide an insight into the relevant dynamic information about intervals and costs for execution of maintenance works in the whole building lifecycle.

The U.S. Geological Survey cartographic and geographic information science research activities 2006-2010

Science.gov (United States)

Usery, E. Lynn

2011-01-01

The U.S. Geological Survey (USGS) produces geospatial databases and topographic maps for the United States of America. A part of that mission includes conducting research in geographic information science (GIScience) and cartography to support mapping and improve the design, quality, delivery, and use of geospatial data and topographic maps. The Center of Excellence for Geospatial Information Science (CEGIS) was established by the USGS in January 2006 as a part of the National Geospatial Program Office. CEGIS (http://cegis.usgs.gov) evolved from a team of cartographic researchers at the Mid-Continent Mapping Center. The team became known as the Cartographic Research group and was supported by the Cooperative Topographic Mapping, Geographic Analysis and Monitoring, and Land Remote Sensing programs of the Geography Discipline of the USGS from 1999-2005. In 2006, the Cartographic Research group and its projects (http://carto-research.er.usgs.gov/) became the core of CEGIS staff and research. In 2006, CEGIS research became focused on The National Map (http://nationalmap.gov).

Advanced techniques for the storage and use of very large, heterogeneous spatial databases. The representation of geographic knowledge: Toward a universal framework. [relations (mathematics)

Science.gov (United States)

Peuquet, Donna J.

1987-01-01

A new approach to building geographic data models that is based on the fundamental characteristics of the data is presented. An overall theoretical framework for representing geographic data is proposed. An example of utilizing this framework in a Geographic Information System (GIS) context by combining artificial intelligence techniques with recent developments in spatial data processing techniques is given. Elements of data representation discussed include hierarchical structure, separation of locational and conceptual views, and the ability to store knowledge at variable levels of completeness and precision.

Finding food: Issues and challenges in using Geographic Information Systems to measure food access

OpenAIRE

Forsyth, Ann; Lytle, Leslie; Riper, David Van

2010-01-01

A significant amount of travel is undertaken to find food. This paper examines challenges in measuring access to food using Geographic Information Systems (GIS), important in studies of both travel and eating behavior. It compares different sources of data available including fieldwork, land use and parcel data, licensing information, commercial listings, taxation data, and online street-level photographs. It proposes methods to classify different kinds of food sales places in a way that says...

Forest management applications of Landsat data in a geographic information system

Science.gov (United States)

Maw, K. D.; Brass, J. A.

1982-01-01

The utility of land-cover data resulting from Landsat MSS classification can be greatly enhanced by use in combination with ancillary data. A demonstration forest management applications data base was constructed for Santa Cruz County, California, to demonstrate geographic information system applications of classified Landsat data. The data base contained detailed soils, digital terrain, land ownership, jurisdictional boundaries, fire events, and generalized land-use data, all registered to a UTM grid base. Applications models were developed from problems typical of fire management and reforestation planning.

An overview of game-based learning in building services engineering education

Science.gov (United States)

Alanne, Kari

2016-03-01

To ensure proper competence development and short graduation times for engineering students, it is essential that the study motivation is encouraged by new learning methods. In game-based learning, the learner's engagement is increased and learning is made meaningful by applying game-like features such as competition and rewarding through virtual promotions or achievement badges. In this paper, the state of the art of game-based learning in building services engineering education at university level is reviewed and discussed. A systematic literature review indicates that educational games have been reported in the field of related disciplines, such as mechanical and civil engineering. The development of system-level educational games that realistically simulate work life in building services engineering is still in its infancy. Novel rewarding practices and more comprehensive approaches entailing the state-of-the-art information tools such as building information modelling, geographic information systems, building management systems and augmented reality are needed in the future.

Using Geographic Information Systems in Knowledge Management Processes

Directory of Open Access Journals (Sweden)

Dr. Filiz Gürder

2013-07-01

Full Text Available Nowadays, organizations are required to develop quick and accurate responses to internal and external changes that gain momentum. In this context, knowledge management activities become more important to all organizations. On the other hand, Geographic Information Systems (GIS become common more and more. GIS which address a broad spectrum of users such as public agencies, local communities, civil society organizations, the private sector, academic environment, and personal users have been aiming to solve problems which occurred in location-based areas. GIS are important to get, combine, analyze and transfer the spatial data. Common use of PCs for personal needs, digital geography and improvements of software technologies, also the need to make socially acceptable business decisions facilitated development and widespread use of GIS applications. The main purpose of this paper is to discuss using areas and contribution potentials of GIS in enterprise-wide knowledge management processes.

Building National Health Research Information Systems (COHRED ...

International Development Research Centre (IDRC) Digital Library (Canada)

Building National Health Research Information Systems (COHRED). This grant will allow the Council on Health Research for Development (COHRED) to create, host and maintain a web-based resource on national health research in low- and middle-income countries in partnership with institutions in the South. Called ...

Possibility of Preparing Thematic Maps Through Developing of the Geographic Information System (GIS

Directory of Open Access Journals (Sweden)

Stjepan Husnjak

2013-04-01

Full Text Available It is a well known fact that nowadays planning of sustainable development and land use requires a lot of reliable and good quality information, which serves as the basis for timely and adequate decision-making. One of the most important forms of information is presented in various maps. Until recently, preparing of such data was, no doubt, a rather complex and time-consuming task. However, at present, thanks to, first of all, the GIS technology it is possible to develop corresponding geographic information systems with databases which then allow comparatively simple and quick preparing of necessary thematic maps. The paper first presents the method of developing the Geographic and Land Information System (GLIS of the Karlovac County which, although developed for the purpose of agricultural development, may also be used in the development of forestry, environment protection, physical planning, water management and for soil conservation and regulation. Several examples illustrate the possibilities of preparing of specialised maps based on this GLIS. The basic data for developing of the geographic and land information system were the data of the Basic Soil Maps and topographic maps of the Republic of Croatia at the scale of 1:50 000 or 1:25 000, and the data from other studies made for the purpose of agricultural development in the area. These data, together with the results of processing and analysing of this data, by digitalisation, generalisation and interpolation, were incorporated into an integrated database of the geographic and land information system by using Microstation, AutoCad, ArcInfo, ArcWiew and Access software and the corresponding hardware. GLIS database consists of two parts. The first part includes the data referring to polygons - pedological contours, and the other part the data on pedological profiles. The base is organised in a way that enable the preparation of different thematic maps, but it can be also used in digital form

GIS in Evaluation: Utilizing the Power of Geographic Information Systems to Represent Evaluation Data

Science.gov (United States)

Azzam, Tarek; Robinson, David

2013-01-01

This article provides an introduction to geographic information systems (GIS) and how the technology can be used to enhance evaluation practice. As a tool, GIS enables evaluators to incorporate contextual features (such as accessibility of program sites or community health needs) into evaluation designs and highlights the interactions between…

Transportation Routing Analysis Geographic Information System (WebTRAGIS) User's Manual

International Nuclear Information System (INIS)

Michelhaugh, R.D.

2000-01-01

In the early 1980s, Oak Ridge National Laboratory (ORNL) developed two transportation routing models: HIGHWAY, which predicts truck transportation routes, and INTERLINE, which predicts rail transportation routes. Both of these models have been used by the U.S. Department of Energy (DOE) community for a variety of routing needs over the years. One of the primary uses of the models has been to determine population-density information, which is used as input for risk assessment with the RADTRAN model, which is available on the TRANSNET computer system. During the recent years, advances in the development of geographic information systems (GISs) have resulted in increased demands from the user community for a GIS version of the ORNL routing models. In April 1994, the DOE Transportation Management Division (EM-261) held a Baseline Requirements Assessment Session with transportation routing experts and users of the HIGHWAY and INTERLINE models. As a result of the session, the development of a new GIS routing model, Transportation Routing Analysis GIS (TRAGIS), was initiated. TRAGIS is a user-friendly, GIS-based transportation and analysis computer model. The older HIGHWAY and INTERLINE models are useful to calculate routes, but they cannot display a graphic of the calculated route. Consequently, many users have experienced difficulty determining the proper node for facilities and have been confused by or have misinterpreted the text-based listing from the older routing models. Some of the primary reasons for the development of TRAGIS are (a) to improve the ease of selecting locations for routing, (b) to graphically display the calculated route, and (c) to provide for additional geographic analysis of the route

Integrating Geographical Information Systems (GIS) with Hydrological Modelling – Applicability and Limitations

OpenAIRE

Rajesh VijayKumar Kherde; Dr. Priyadarshi. H. Sawant

2013-01-01

The evolution of Geographic information systems (GIS) facilitated the use digital terrain data for topography based hydrological modelling. The use of spatial data for hydrological modelling emerged from the great capability of GIS tools to store and handle the data associated hydro-morphology of the basin. These models utilize the spatially variable terrain data for converting rainfall into surface runoff.Manual map manipulation has always posed difficulty in analysing and designing large sc...

The prediction of engineering cost for green buildings based on information entropy

Science.gov (United States)

Liang, Guoqiang; Huang, Jinglian

2018-03-01

Green building is the developing trend in the world building industry. Additionally, construction costs are an essential consideration in building constructions. Therefore, it is necessary to investigate the problems of cost prediction in green building. On the basis of analyzing the cost of green building, this paper proposes the forecasting method of actual cost in green building based on information entropy and provides the forecasting working procedure. Using the probability density obtained from statistical data, such as labor costs, material costs, machinery costs, administration costs, profits, risk costs a unit project quotation and etc., situations can be predicted which lead to cost variations between budgeted cost and actual cost in constructions, through estimating the information entropy of budgeted cost and actual cost. The research results of this article have a practical significance in cost control of green building. Additionally, the method proposed in this article can be generalized and applied to a variety of other aspects in building management.

Informed consent -- Building consensus

International Nuclear Information System (INIS)

Lovenheim, R.

1990-01-01

The author shares his observations and offers an approach to 'building consensus' for what he believes is the only environmentally sound option, i.e., safe, permanent disposal of low-level radioactive waste (LLRW). Consensus does not mean unanimity, acceptance, or harmony. The low-level radioactive waste disposal issue is fraught with fear and hysteria. The paper discusses major emotions that fracture public opinion regarding this issue. The author defines consensus as the informed consent of LLRW disposal strategies by a majority of citizens whose cooperation is required to achieve the goals of environmentally sound solution. The political aspects are reviewed. The need for US Department of Energy to fulfill its importance technical assistance role is discussed

A geographic information system-based 3D city estate modeling and simulation system

Science.gov (United States)

Chong, Xiaoli; Li, Sha

2015-12-01

This paper introduces a 3D city simulation system which is based on geographic information system (GIS), covering all commercial housings of the city. A regional- scale, GIS-based approach is used to capture, describe, and track the geographical attributes of each house in the city. A sorting algorithm of "Benchmark + Parity Rate" is developed to cluster houses with similar spatial and construction attributes. This system is applicable for digital city modeling, city planning, housing evaluation, housing monitoring, and visualizing housing transaction. Finally, taking Jingtian area of Shenzhen as an example, the each unit of 35,997 houses in the area could be displayed, tagged, and easily tracked by the GIS-based city modeling and simulation system. The match market real conditions well and can be provided to house buyers as reference.

Geographic Information System (GIS) capabilities in traffic accident information management: a qualitative approach

Science.gov (United States)

Ahmadi, Maryam; Valinejadi, Ali; Goodarzi, Afshin; Safari, Ameneh; Hemmat, Morteza; Majdabadi, Hesamedin Askari; Mohammadi, Ali

2017-01-01

Background Traffic accidents are one of the more important national and international issues, and their consequences are important for the political, economical, and social level in a country. Management of traffic accident information requires information systems with analytical and accessibility capabilities to spatial and descriptive data. Objective The aim of this study was to determine the capabilities of a Geographic Information System (GIS) in management of traffic accident information. Methods This qualitative cross-sectional study was performed in 2016. In the first step, GIS capabilities were identified via literature retrieved from the Internet and based on the included criteria. Review of the literature was performed until data saturation was reached; a form was used to extract the capabilities. In the second step, study population were hospital managers, police, emergency, statisticians, and IT experts in trauma, emergency and police centers. Sampling was purposive. Data was collected using a questionnaire based on the first step data; validity and reliability were determined by content validity and Cronbach’s alpha of 75%. Data was analyzed using the decision Delphi technique. Results GIS capabilities were identified in ten categories and 64 sub-categories. Import and process of spatial and descriptive data and so, analysis of this data were the most important capabilities of GIS in traffic accident information management. Conclusion Storing and retrieving of descriptive and spatial data, providing statistical analysis in table, chart and zoning format, management of bad structure issues, determining the cost effectiveness of the decisions and prioritizing their implementation were the most important capabilities of GIS which can be efficient in the management of traffic accident information. PMID:28848627

Geographic Information for Analysis of Highway Runoff-Quality Data on a National or Regional Scale in the Conterminous United States

Science.gov (United States)

Smieszek, Tomas W.; Granato, Gregory E.

2000-01-01

Spatial data are important for interpretation of water-quality information on a regional or national scale. Geographic information systems (GIS) facilitate interpretation and integration of spatial data. The geographic information and data compiled for the conterminous United States during the National Highway Runoff Water-Quality Data and Methodology Synthesis project is described in this document, which also includes information on the structure, file types, and the geographic information in the data files. This 'geodata' directory contains two subdirectories, labeled 'gisdata' and 'gisimage.' The 'gisdata' directory contains ArcInfo coverages, ArcInfo export files, shapefiles (used in ArcView), Spatial Data Transfer Standard Topological Vector Profile format files, and meta files in subdirectories organized by file type. The 'gisimage' directory contains the GIS data in common image-file formats. The spatial geodata includes two rain-zone region maps and a map of national ecosystems originally published by the U.S. Environmental Protection Agency; regional estimates of mean annual streamflow, and water hardness published by the Federal Highway Administration; and mean monthly temperature, mean annual precipitation, and mean monthly snowfall modified from data published by the National Climatic Data Center and made available to the public by the Oregon Climate Service at Oregon State University. These GIS files were compiled for qualitative spatial analysis of available data on a national and(or) regional scale and therefore should be considered as qualitative representations, not precise geographic location information.

76 FR 56780 - Notice of Proposed Information Collection: Comment Request; Capacity Building for Sustainable...

Science.gov (United States)

2011-09-14

... Information Collection: Comment Request; Capacity Building for Sustainable Communities Program: Notice of... public comments on the subject proposal. The Capacity Building for Sustainable Communities Program... also lists the following information: Title of Proposal: Capacity Building for Sustainable Communities...

Application of geographic information system as a tool for environmental monitoring in support of a nuclear installation

International Nuclear Information System (INIS)

Ribeiro, Glaucielen F.; Silva, Nivaldo C.; Oliveira, Alexandre P.; Ferrari, Talita N.; Dias, Danila C.; Alberti, Heber Luiz C.

2013-01-01

The increasing advance of technologies of geographic information systems (GIS), computer processing techniques, and the growing volume of spatial data available and demand for automated systems to aid decision making are motivating enterprises and research institutions to make use of GIS technologies and Intelligent Computing. In this context, the Laboratory of Pocos de Caldas (LAPOC) has a large collection of data that are generated from environmental monitoring of a nuclear installation. These data can be organized through a georeferenced database in order to improve the quality of information, in addition to generating new interpretations from data and existing products. Therefore, this study aims to generate a database that is capable of gathering existing data into a Geographic Information System (GIS) platform using ArcGIS 9.3.1 software which has a model of relational database that stores geographic data in Geodatabase format. The steps of this process start with the organization of spatial and descriptive data, moving through logic and conceptual modeling and finally, implementation of the database into the GIS environment. The data modeling through the Geodatabase was adequate since its structure enabled the data work to be done in an efficient manner in addition to allowing centralized management of such data. This demonstrates the great potential of the tool and improvement of the quality and availability of information. (author)

Reducing the operational energy demand in buildings using building information modeling tools and sustainability approaches

Directory of Open Access Journals (Sweden)

Mojtaba Valinejad Shoubi

2015-03-01

Full Text Available A sustainable building is constructed of materials that could decrease environmental impacts, such as energy usage, during the lifecycle of the building. Building Information Modeling (BIM has been identified as an effective tool for building performance analysis virtually in the design stage. The main aims of this study were to assess various combinations of materials using BIM and identify alternative, sustainable solutions to reduce operational energy consumption. The amount of energy consumed by a double story bungalow house in Johor, Malaysia, and assessments of alternative material configurations to determine the best energy performance were evaluated by using Revit Architecture 2012 and Autodesk Ecotect Analysis software to show which of the materials helped in reducing the operational energy use of the building to the greatest extent throughout its annual life cycle. At the end, some alternative, sustainable designs in terms of energy savings have been suggested.

Gulf-Wide Information System, Environmental Sensitivity Index Socio-Economic Features, Geographic NAD83, LDWF (2001) [esi_socecon_LDWF_2001

Data.gov (United States)

Louisiana Geographic Information Center — This data set contains socio-economic features in coastal Louisiana. Feature-specific contact, type, and source information are stored in relational data tables...

Quality of web-based family-building information for LGBTQ individuals.

Science.gov (United States)

Kreines, Fabiana M; Farr, Alex; Chervenak, Frank A; Grünebaum, Amos

2018-02-01

The number of patients who seek health information on the internet is increasing. Rates are particularly high among lesbian, gay, bisexual, transgender and queer (LGBTQ) individuals, due to health care barriers. The aim of this study was to evaluate the quality and inclusivity of web-based information pertaining to LGBTQ family building. The first 100 US-based websites pertaining to LGBTQ family building were identified through a terminology-based internet search. After eliminating 45 websites, 55 websites were found to be eligible. The 2016 Website Information Reliability Evaluation Instrument (of the Office of Disease Prevention and Health Promotion, US Department of Health and Human Services) was used to analyse the quality of information on each website. Websites were analysed for inclusivity of important topics surrounding LGBTQ family building. A total of 46 websites (83.6%) belonged or were related to reproductive services and served as advertisements for their respective owners; nine websites (16.4%) belonged to third parties. No website met more than four of the six major reliability criteria, and 42 websites (76.4%) met only one or two of the six major reliability criteria. When inclusivity was considered, 29 websites (52.7%) mentioned options for transgender individuals and nine websites (16.4%) mentioned adoption. There is a lack of reliable web-based information for LGBTQ family building and a need for improvement in quality and scope. Improvements could lead to a shift in reproductive health care towards better inclusion of and catering to LGBTQ individuals.

Application of geographic information systems to waste minimization efforts at the national laboratories

International Nuclear Information System (INIS)

Lyttle, T.W.; Smith, D.M.; Burns, M.; Weinrach, J.B.

1993-01-01

At Los Alamos National Laboratory (LANL), facility waste streams tend to be small but highly diverse. Initial characterization of such waste streams is often difficult in part due to a lack of tools to assist the generators themselves in completing such assessments. A methodology has been developed at LANL to allow process knowledgeable field personnel to develop baseline waste generation assessments and to evaluate potential waste minimization technology. This Process Waste Assessment (PWA) system is an application constructed within the Process Modeling System and currently being integrated with the InFoCAD Geographic Information System (GIS). The Process Modeling System (PMS) is an object-oriented, mass balance-based, discrete-event simulation framework written using the Common Lisp Object System (CLOS). Analytical capabilities supported within the PWA system include: complete mass balance specifications, historical characterization of selected waste stream and generation of facility profiles for materials consumption, resource utilization and worker exposure. Development activities include integration with the LANL facilities management Geographic Information System (GIS) and provisions for a Best Available Technologies (BAT) database. The environments used to develop these assessment tools will be discussed in addition to a review of initial implementation results

Geographic information systems - transportation ISTEA management systems server net prototype pooled fund study : phase B - summary

Science.gov (United States)

1997-06-01

The Geographic Information System-Transportation (GIS-T) ISTEA Management Systems Server Net Prototype Pooled Fund Study represents the first national cooperative effort in the transportation industry to address the management and monitoring systems ...

User-centred design of neogeography: the impact of volunteered geographic information on users' perceptions of online map 'mashups'.

Science.gov (United States)

Parker, Christopher J; May, Andrew; Mitchell, Val

2014-01-01

This paper investigates the influence of presenting volunteered and professionally created geographic information to 101 wheelchair users through an interactive website that included information collected by wheelchair-using volunteers. The aim of this experiment was to understand the influence that (1) knowing a map-based website contains volunteered information and (2) actually including volunteered information within an online interactive map (a mashup) have on the perceived trust of the user, described in terms of quality and authority. Analysis using Kruskal-Wallis showed that judgements of currency were influenced by including geo-information from untrained volunteers (volunteered geographic information) within the mashup, but not influenced by the participant being told that the online map contained volunteered information. The participants appeared to make judgements based on what information they saw, rather than what they were told about the source of the information. Since 2004, information services have combined crowdsourced (volunteered) alongside professional information within online interactive maps. An online experiment presented both of these information types to wheelchair users within a travel context. Including volunteered information was shown to increase the perceptions of how up-to-date the maps were.

National Carbon Sequestration Database and Geographic Information System (NatCarb)

Energy Technology Data Exchange (ETDEWEB)

Kenneth Nelson; Timothy Carr

2009-03-31

This annual and final report describes the results of the multi-year project entitled 'NATional CARBon Sequestration Database and Geographic Information System (NatCarb)' (http://www.natcarb.org). The original project assembled a consortium of five states (Indiana, Illinois, Kansas, Kentucky and Ohio) in the midcontinent of the United States (MIDCARB) to construct an online distributed Relational Database Management System (RDBMS) and Geographic Information System (GIS) covering aspects of carbon dioxide (CO{sub 2}) geologic sequestration. The NatCarb system built on the technology developed in the initial MIDCARB effort. The NatCarb project linked the GIS information of the Regional Carbon Sequestration Partnerships (RCSPs) into a coordinated regional database system consisting of datasets useful to industry, regulators and the public. The project includes access to national databases and GIS layers maintained by the NatCarb group (e.g., brine geochemistry) and publicly accessible servers (e.g., USGS, and Geography Network) into a single system where data are maintained and enhanced at the local level, but are accessed and assembled through a single Web portal to facilitate query, assembly, analysis and display. This project improves the flow of data across servers and increases the amount and quality of available digital data. The purpose of NatCarb is to provide a national view of the carbon capture and storage potential in the U.S. and Canada. The digital spatial database allows users to estimate the amount of CO{sub 2} emitted by sources (such as power plants, refineries and other fossil-fuel-consuming industries) in relation to geologic formations that can provide safe, secure storage sites over long periods of time. The NatCarb project worked to provide all stakeholders with improved online tools for the display and analysis of CO{sub 2} carbon capture and storage data through a single website portal (http://www.natcarb.org/). While the external

Objective Evaluation in an Online Geographic Information System Certificate Program

Directory of Open Access Journals (Sweden)

Scott L. WALKER

2005-01-01

Full Text Available Objective Evaluation in an Online Geographic Information System Certificate Program Asst. Professor. Dr. Scott L. WALKER Texas State University-San Marcos San Marcos, Texas, USA ABSTRACT Departmental decisions regarding distance education programs can be subject to subjective decision-making processes influenced by external factors such as strong faculty opinions or pressure to increase student enrolment. This paper outlines an evaluation of a departmental distance-education program. The evaluation utilized several methods that strived to inject objectivity in evaluation and subsequent decision-making. A rapid multi-modal approach included evaluation methods of (1 considering the online psychosocial learning environment, (2 content analyses comparing the online version of classes to face-to-face versions, (3 cost comparisons in online vs. face-to-face classes, (4 student outcomes, (5 student retention, and (6 benchmarking. These approaches offer opportunities for departmental administrators and decision-making committees to make judgments informed by facts rather than being influenced by the emotions, beliefs, or opinions of organizational dynamics.

5D Building Information Modelling – A Practicability Review

Directory of Open Access Journals (Sweden)

Lee Xia Sheng

2016-01-01

Full Text Available Quality, time and cost are the three most important elements in any construction project. Building information that comes timely and accurately in multiple dimensions will facilitate a refined decision making process which can improve the construction quality, time and cost. 5 dimensional Building Information Modelling or 5D BIM is an emerging trend in the construction industry that integrates all the major information starting from the initial design to the final construction stage. After that, the integrated information is arranged and communicated through Virtual Design and Construction (VDC. This research is to gauge the practicability of 5D BIM with an action research type pilot study by the means of hands-on modelling of a conceptual bungalow design based on one of the most popular BIM tools. A bungalow is selected as a study subject to simulate the major stages of 5D BIM digital workflow. The whole process starts with developing drawings (2D into digital model (3D, and is followed by the incorporation of time (4D and cost (5D. Observations are focused on the major factors that will affect the practicability of 5D BIM, including the modelling effort, inter-operability, information output and limitations. This research concludes that 5D BIM certainly has high level practicability which further differentiates BIM from Computer Aided Design (CAD. The integration of information not only enhanced the efficiency and accuracy of process in all stages, but also enabled decision makers to have a sophisticated interpretation of information which is almost impossible with the conventional 2D CAD workflow. Although it is possible to incorporate more than 5 dimensions of information, it is foreseeable that excessive information may escalate the complexity unfavourably for BIM implementation. 5D BIM has achieved a significant level of practicability; further research should be conducted to streamline implementation. Once 5D BIM is matured and widely

Gulf-Wide Information System, Environmental Sensitivity Index Swamps, Geographic NAD83, LDWF (2001) [esi_swamp_LDWF_2001

Data.gov (United States)

Louisiana Geographic Information Center — This data set contains Environmental Sensitivity Index (ESI) swamps data of coastal Louisiana. The ESI is a classification and ranking system, which characterizes...

Gulf-Wide Information System, Environmental Sensitivity Index Salinity, Geographic NAD83, LDWF (2001) [esi_salinity_LDWF_2001

Data.gov (United States)

Louisiana Geographic Information Center — This data set contains Environmental Sensitivity Index (ESI) salinity data of coastal Louisiana. The ESI is a classification and ranking system, which characterizes...

Gulf-Wide Information System, Environmental Sensitivity Index Seagrass, Geographic NAD83, LDWF (2001) [esi_seagrass_LDWF_2001

Data.gov (United States)

Louisiana Geographic Information Center — This data set contains Environmental Sensitivity Index (ESI) seagrass data of coastal Louisiana. The ESI is a classification and ranking system, which characterizes...

Energetic planning in isolated Amazonian communities using geographical information system; Planejamento energetico em regioes isoladas da Amazonia utilizando sistemas de informacoes geograficas

Energy Technology Data Exchange (ETDEWEB)

Almeida, Arthur [Universidade Federal do Para (UFPA), Belem, PA (Brazil). Programa de Pos-Graduacao de Engenharia Eletrica; Rocha, Brigida R.P.; Monteiro, Jose H.A.; Gaspar, Gabriella C.M. [Universidade Federal do Para (UFPA), Belem, PA (Brazil). Dept. de Engenharia Eletrica e de Computacao; Aarao Junior, Raimundo N.N. [Universidade Federal do Para (UFPA), Belem, PA (Brazil). Dept. de Engenharia Mecanica

2004-07-01

This paper proposes a system of electric planning in isolated Amazonian communities. For those communities, we propose the use of decentralized systems of electric energy with biomass as fuel. We also propose a computer system of electric planning with geographical information systems for its facilities of integrating geographical information, so useful in an Amazonian context. (author)

Public health component in building information modeling

Science.gov (United States)

Trufanov, A. I.; Rossodivita, A.; Tikhomirov, A. A.; Berestneva, O. G.; Marukhina, O. V.

2018-05-01

A building information modelling (BIM) conception has established itself as an effective and practical approach to plan, design, construct, and manage buildings and infrastructure. Analysis of the governance literature has shown that the BIM-developed tools do not take fully into account the growing demands from ecology and health fields. In this connection, it is possible to offer an optimal way of adapting such tools to the necessary consideration of the sanitary and hygienic specifications of materials used in construction industry. It is proposed to do it through the introduction of assessments that meet the requirements of national sanitary standards. This approach was demonstrated in the case study of Revit® program.

Expression and Organization of Geographic Spatial Relations Based on Topic Maps

Science.gov (United States)

Liang, H. J.; Wang, H.; Cui, T. J.; Guo, J. F.

2017-09-01

Spatial Relation is one of the important components of Geographical Information Science and Spatial Database. There have been lots of researches on Spatial Relation and many different spatial relations have been proposed. The relationships among these spatial relations such as hierarchy and so on are complex and this brings some difficulties to the applications and teaching of these spatial relations. This paper summaries some common spatial relations, extracts the topic types, association types, resource types of these spatial relations using the technology of Topic Maps, and builds many different relationships among these spatial relations. Finally, this paper utilizes Java and Ontopia to build a topic map among these common spatial relations, forms a complex knowledge network of spatial relations, and realizes the effective management and retrieval of spatial relations.

Soil erosion fragility assessment using an impact model and geographic information system

OpenAIRE

Jorge,Luiz Alberto Blanco

2009-01-01

A study was taken in a 1566 ha watershed situated in the Capivara River basin, municipality of Botucatu, São Paulo State, Brazil. This environment is fragile and can be subjected to different forms of negative impacts, among them soil erosion by water. The main objective of the research was to develop a methodology for the assessment of soil erosion fragility at the various different watershed positions, using the geographic information system ILWIS version 3.3 for Windows. An impact model wa...

On the relevance of Gibson's affordance concept for geographical information science (GISc).

Science.gov (United States)

Jonietz, David; Timpf, Sabine

2015-09-01

J. J. Gibson's concept of affordances has provided a theoretical basis for various studies in geographical information science (GISc). This paper sets out to explain its popularity from a GISc perspective. Based on a short review of previous work, it will be argued that its main contributions to GISc are twofold, including an action-centered view of spatial entities and the notion of agent-environment mutuality. Using the practical example of pedestrian behavior simulation, new potentials for using and extending affordances are discussed.

THE EXTRACTION OF INDOOR BUILDING INFORMATION FROM BIM TO OGC INDOORGML

Directory of Open Access Journals (Sweden)

T.-A. Teo

2017-07-01

Full Text Available Indoor Spatial Data Infrastructure (indoor-SDI is an important SDI for geosptial analysis and location-based services. Building Information Model (BIM has high degree of details in geometric and semantic information for building. This study proposed direct conversion schemes to extract indoor building information from BIM to OGC IndoorGML. The major steps of the research include (1 topological conversion from building model into indoor network model; and (2 generation of IndoorGML. The topological conversion is a major process of generating and mapping nodes and edges from IFC to indoorGML. Node represents every space (e.g. IfcSpace and objects (e.g. IfcDoor in the building while edge shows the relationships between nodes. According to the definition of IndoorGML, the topological model in the dual space is also represented as a set of nodes and edges. These definitions of IndoorGML are the same as in the indoor network. Therefore, we can extract the necessary data in the indoor network and easily convert them into IndoorGML based on IndoorGML Schema. The experiment utilized a real BIM model to examine the proposed method. The experimental results indicated that the 3D indoor model (i.e. IndoorGML model can be automatically imported from IFC model by the proposed procedure. In addition, the geometric and attribute of building elements are completely and correctly converted from BIM to indoor-SDI.

Building Information Modeling for Managing Design and Construction

DEFF Research Database (Denmark)

Berard, Ole Bengt

outcome of construction work. Even though contractors regularly encounter design information problems, these issues are accepted as a condition of doing business and better design information has yet to be defined. Building information modeling has the inherent promise of improving the quality of design...... information for work tasks. * Amount of Information – the number of documents and files, and other media, should be appropriate for the scope. The criteria were identified by empirical studies and theory on information quality in the architectural, engineering and construction (AEC) industry and other fields......Contractors planning and executing construction work encounter many kinds of problems with design information, such as uncoordinated drawings and specification, missing relevant information, and late delivery of design information. Research has shown that missing design information and unintended...

Nation-wide, web-based, geographic information system for the integrated surveillance and control of dengue fever in Mexico.

Science.gov (United States)

Hernández-Ávila, Juan Eugenio; Rodríguez, Mario-Henry; Santos-Luna, René; Sánchez-Castañeda, Veronica; Román-Pérez, Susana; Ríos-Salgado, Víctor Hugo; Salas-Sarmiento, Jesús Alberto

2013-01-01

Dengue fever incidence and its geographical distribution are increasing throughout the world. Quality and timely information is essential for its prevention and control. A web based, geographically enabled, dengue integral surveillance system (Dengue-GIS) was developed for the nation-wide collection, integration, analysis and reporting of geo-referenced epidemiologic, entomologic, and control interventions data. Consensus in the design and practical operation of the system was a key factor for its acceptance. Working with information systems already implemented as a starting point facilitated its acceptance by officials and operative personnel. Dengue-GIS provides the geographical detail needed to plan, asses and evaluate the impact of control activities. The system is beginning to be adopted as a knowledge base by vector control programs. It is used to generate evidence on impact and cost-effectiveness of control activities, promoting the use of information for decision making at all levels of the vector control program. Dengue-GIS has also been used as a hypothesis generator for the academic community. This GIS-based model system for dengue surveillance and the experience gathered during its development and implementation could be useful in other dengue endemic countries and extended to other infectious or chronic diseases.

Quantifying forest fragmentation using Geographic Information Systems and Forest Inventory and Analysis plot data

Science.gov (United States)

Dacia M. Meneguzzo; Mark H. Hansen

2009-01-01

Fragmentation metrics provide a means of quantifying and describing forest fragmentation. The most common method of calculating these metrics is through the use of Geographic Information System software to analyze raster data, such as a satellite or aerial image of the study area; however, the spatial resolution of the imagery has a significant impact on the results....

A Geographic Information System approach to modeling nutrient and sediment transport

Energy Technology Data Exchange (ETDEWEB)

Levine, D.A. [Automated Sciences Group, Inc., Oak Ridge, TN (United States); Hunsaker, C.T.; Beauchamp, J.J. [Oak Ridge National Lab., TN (United States); Timmins, S.P. [Analysas Corp., Oak Ridge, TN (United States)

1993-02-01

The objective of this study was to develop a water quality model to quantify nonpoint-source (NPS) pollution that uses a geographic information system (GIS) to link statistical modeling of nutrient and sediment delivery with the spatial arrangement of the parameters that drive the model. The model predicts annual nutrient and sediment loading and was developed, calibrated, and tested on 12 watersheds within the Lake Ray Roberts drainage basin in north Texas. Three physiographic regions are represented by these watersheds, and model success, as measured by the accuracy of load estimates, was compared within and across these regions.

Nitrate Measurment in Water Source of Karaj City and Zonning it Geographic Information Systems (GIS)

OpenAIRE

A.R. Shakib; J. Rahimi; M. Noori Sepehr; M. Zarrabi

2015-01-01

Background & Objectives: Nitrate is one of drinking water pollutant which is introduced to water body from municipal wastewater. Information on nitrate concentration and its distribution in water resource is necessary in safe drinking water supply. For that reason, the present work was done for investigation of nitrate in Karaj water supply resource and its zonning with Geographic Information Systems (GIS). Materials and Methods: In this work, the nitrate concentration in 200 wells of Karaj w...

Use of geographical information systems for delimiting health service areas in China

Directory of Open Access Journals (Sweden)

Xuechen Xiong

2017-05-01

Full Text Available With the objective of choosing a practical and valid method to delimit health service areas of regional health service centres to build a regional basic health service network, we first drew lessons from traditional geographic methods of delimiting trade areas and then applied two methods to delimit health service areas, i.e. the proximal method and the gravity method. We verified the effectiveness of these methods by an index of similarity with the aid of real in-patient data. Calculation of the similarity indices shows that health service areas delimited by the proximal method has an 87.3% similarity to the real health service area, while the gravity method gives 88.6%. Our conclusion is that both methods are suitable for delimiting health service areas at regional health service centres, but find that the proximal method is more practicable in operational terms for delimiting health service areas in region health planning.

Vision-based building energy diagnostics and retrofit analysis using 3D thermography and building information modeling

Science.gov (United States)

Ham, Youngjib

The emerging energy crisis in the building sector and the legislative measures on improving energy efficiency are steering the construction industry towards adopting new energy efficient design concepts and construction methods that decrease the overall energy loads. However, the problems of energy efficiency are not only limited to the design and construction of new buildings. Today, a significant amount of input energy in existing buildings is still being wasted during the operational phase. One primary source of the energy waste is attributed to unnecessary heat flows through building envelopes during hot and cold seasons. This inefficiency increases the operational frequency of heating and cooling systems to keep the desired thermal comfort of building occupants, and ultimately results in excessive energy use. Improving thermal performance of building envelopes can reduce the energy consumption required for space conditioning and in turn provide building occupants with an optimal thermal comfort at a lower energy cost. In this sense, energy diagnostics and retrofit analysis for existing building envelopes are key enablers for improving energy efficiency. Since proper retrofit decisions of existing buildings directly translate into energy cost saving in the future, building practitioners are increasingly interested in methods for reliable identification of potential performance problems so that they can take timely corrective actions. However, sensing what and where energy problems are emerging or are likely to emerge and then analyzing how the problems influence the energy consumption are not trivial tasks. The overarching goal of this dissertation focuses on understanding the gaps in knowledge in methods for building energy diagnostics and retrofit analysis, and filling these gaps by devising a new method for multi-modal visual sensing and analytics using thermography and Building Information Modeling (BIM). First, to address the challenges in scaling and

An Ambient Intelligence Framework for the Provision of Geographically Distributed Multimedia Content to Mobility Impaired Users

Science.gov (United States)

Kehagias, Dionysios D.; Giakoumis, Dimitris; Tzovaras, Dimitrios; Bekiaris, Evangelos; Wiethoff, Marion

This chapter presents an ambient intelligence framework whose goal is to facilitate the information needs of mobility impaired users on the move. This framework couples users with geographically distributed services and the corresponding multimedia content, enabling access to context-sensitive information based on user geographic location and the use case under consideration. It provides a multi-modal facility that is realized through a set of mobile devices and user interfaces that address the needs of ten different types of user impairments. The overall ambient intelligence framework enables users who are equipped with mobile devices to access multimedia content in order to undertake activities relevant to one or more of the following domains: transportation, tourism and leisure, personal support services, work, business, education, social relations and community building. User experience is being explored against those activities through a specific usage scenario.

CERN building numbers: no rhyme and little reason

CERN Multimedia

Katarina Anthony

2012-01-01

Over the years, people at CERN have been trying to develop a single theory to explain CERN’s building numbers. Behind these seemingly random numbers there must surely be an ultimate solution: CERN’s second Standard Model, if you will. The CERN Bulletin finds out more…   Still trying to understand CERN's building numbers? Give up... There’s no denying it: the CERN site cannot be navigated without professional help. You can walk down a single corridor and pass through Buildings 33, 4, 5 and 53… in that order. Surely there must be a method behind this madness? “Well, if there is one, we’ve yet to find it,” says Youri Robert, who is in charge of geographic information and patrimony data in the GS Department’s Site Engineering group, which is responsible for the classification of CERN’s buildings. “We do have some naming conventions in place, especially for buildings related to...

[What potential do geographic information systems have for population-wide health monitoring in Germany? : Perspectives and challenges for the health monitoring of the Robert Koch Institute].

Science.gov (United States)

Thißen, Martin; Niemann, Hildegard; Varnaccia, Gianni; Rommel, Alexander; Teti, Andrea; Butschalowsky, Hans; Manz, Kristin; Finger, Jonas David; Kroll, Lars Eric; Ziese, Thomas

2017-12-01

Geographic information systems (GISs) are computer-based systems with which geographical data can be recorded, stored, managed, analyzed, visualized and provided. In recent years, they have become an integral part of public health research. They offer a broad range of analysis tools, which enable innovative solutions for health-related research questions. An analysis of nationwide studies that applied geographic information systems underlines the potential this instrument bears for health monitoring in Germany. Geographic information systems provide up-to-date mapping and visualization options to be used for national health monitoring at the Robert Koch Institute (RKI). Furthermore, objective information on the residential environment as an influencing factor on population health and on health behavior can be gathered and linked to RKI survey data at different geographic scales. Besides using physical information, such as climate, vegetation or land use, as well as information on the built environment, the instrument can link socioeconomic and sociodemographic data as well as information on health care and environmental stress to the survey data and integrate them into concepts for analyses. Therefore, geographic information systems expand the potential of the RKI to present nationwide, representative and meaningful health-monitoring results. In doing so, data protection regulations must always be followed. To conclude, the development of a national spatial data infrastructure and the identification of important data sources can prospectively improve access to high quality data sets that are relevant for the health monitoring.

Rates and patterns of deforestation in the Philippines: application of geographic information system analysis

Science.gov (United States)

Dawning S. Lui; Louis R. Iverson; Sandra Brown

1993-01-01

Land-use maps for 1934 and 1988, and a 1941 road map of the Philippines were digitized into a geographic information system. These maps were then analyzed to determine the rates of deforestation and their relationship with factors such as the distance of forests to roads and forest fragmentation (measured by perimeter-to-area ratio (P/A ratio) of forest patches) for...

Geographic Information System and Geoportal «River basins of the European Russia»

Science.gov (United States)

Yermolaev, O. P.; Mukharamova, S. S.; Maltsev, K. A.; Ivanov, M. A.; Ermolaeva, P. O.; Gayazov, A. I.; Mozzherin, V. V.; Kharchenko, S. V.; Marinina, O. A.; Lisetskii, F. N.

2018-01-01

Geographic Information System (GIS) and Geoportal with open access «River basins of the European Russia» were implemented. GIS and Geoportal are based on the map of basins of small rivers of the European Russia with information about natural and anthropogenic characteristics, namely geomorphometry of basins relief; climatic parameters, representing averages, variation, seasonal variation, extreme values of temperature and precipitation; land cover types; soil characteristics; type and subtype of landscape; population density. The GIS includes results of spatial analysis and modelling, in particular, assessment of anthropogenic impact on river basins; evaluation of water runoff and sediment runoff; climatic, geomorphological and landscape zoning for the European part of Russia.

A methodology for landfill location using geographic information systems: a Colombian regional case

OpenAIRE

Carlos Alfonso Zafra Mejía; Franklin Andrés Mendoza Castañeda; Paula Alejandra Montoya Varela

2012-01-01

The regions’ economic growth and accelerated development have created high solid waste production rates; such waste is disposed of in many localities in places without any technical and/or environmental measures having been taken. This paper presents guidelines for locating landfills by combining geographic information systems (GIS) with analytic hierarchy process (AHP) and simple additive weighting (SAW). The methodology so developed was applied to the regional case of Tame in the Arauca dep...

A methodology for landfill location using geographic information systems: a Colombian regional case

OpenAIRE

Zafra Mejía, Carlos Alfonso; Mendoza Castañeda, Franklin Andrés; Montoya Varela, Paula Alejandra

2012-01-01

The regions' economic growth and accelerated development have created high solid waste production rates; such waste is dis-posed of in many localities in places without any technical and/or environmental measures having been taken. This paper presents guidelines for locating landfills by combining geographic information systems (GIS) with analytic hierarchy process (AHP) and simple additive weighting (SAW). The methodology so developed was applied to the regional case of Tame in the Arauca de...

Multidimensional building objects in a Danish geo-information infrastructure perspective

DEFF Research Database (Denmark)

Schrøder, Lise

2002-01-01

The emerging multidimensional GI- and VR-technologies within the professional disciplines dealing with design, planning and management processes is leading to a demand for four-dimensional building objects as part of the public geo-information infrastructure. The other way around the recognition...... of the building as a four-dimensional geo-phenomenon will provide a reference between different data sets whether representing buildings in two, three or four dimensions. Finally a central issue is the potential in using frameworks of multidimensional representations as interfaces to the available data sets...

Geographic information system development in the CARETS project

Science.gov (United States)

Mitchell, William B.; Fegeas, Robin G.; Fitzpatrick, Katherine A.; Hallam, Cheryl A.

1977-01-01

Experience in the development of a geographic information system to support the CARETS project has confirmed the considerable advantages that may accrue by paralleling the system development with a rational and balanced system production effort which permits the integration of the education and training of users with interim deliverable products to them. Those advantages include support for a long-term staff plan that recognizes substantial staff changes through system development and implementation, a fiscal plan that provides continuity in resources necessary for total system development, and a feedback system which allows the user to communicate his experiences in using the system. Thus far balance between system development and system production has not been achieved because of continuing large-scale spatial data processing requirements coupled with strong and insistent demands from users for immediately deliverable products from the system. That imbalance has refocussed staffing and fiscal plans from long-term system development to short- and near-term production requirements, continuously extends total system development time, and increases the possibility that later system development may reduce the usefulness of current interim products.

Exposure and vulnerability assessment of buildings extracted from lidar derived datasets in Bucao River floodplains, Zambales, Philippines

Science.gov (United States)

Paz-Alberto, Annie Melinda; Ramos, Gloria N.; Espiritu, Jo Adrianne; Mapanao, Kathrina M.; Lao, Ranilo B.

2017-09-01

The Philippines has a geographic and geological setting that make it prone to various hazards including weather and climate-related. It is usually strongly affected by monsoon and typhoon occurrences that cause floods due to torrential rains that causes great risks in man's life and properties, resulting in a significant national loss. Strategies for disaster prevention to protect human lives, properties and social infrastructure is therefore necessary. Different important parameters in disaster risk management such as earth observations, Light Detection and Ranging and Geographic Information System were integrated and utilized in this study. This study dealt with mapping and assessment of buildings that might possibly be exposed and vulnerable to flooding based on the simulated flood maps at different rainfall scenarios in Bucao River Basin. The assessment was done through GIS overlay analysis of the CLSU PHIL-LiDAR 1 Project outputs, the 3D building GIS database and flood hazard maps. Results of this study were series of maps with statistics at different rainfall scenarios. From 23,097 building features extracted, 10,118 buildings, 4,258 buildings and 7,433 buildings were the identified highest number of buildings exposed to flooding and a total of 2,427 buildings, 3,914 buildings and 7,204 buildings from the exposed were identified that had high vulnerabilities in terms of height at low, medium and high hazards of 100 year return period, respectively. Through these maps, it is easier to disseminate information that is more realistic to the residents about the hazardous areas and to help them act on warning and evacuating measures.

Multi-agent control system with information fusion based comfort model for smart buildings

International Nuclear Information System (INIS)

Wang, Zhu; Wang, Lingfeng; Dounis, Anastasios I.; Yang, Rui

2012-01-01

Highlights: ► Proposed a model to manage indoor energy and comfort for smart buildings. ► Developed a control system to maximize comfort with minimum energy consumption. ► Information fusion with ordered weighted averaging aggregation is used. ► Multi-agent technology and heuristic intelligent optimization are deployed in developing the control system. -- Abstract: From the perspective of system control, a smart and green building is a large-scale dynamic system with high complexity and a huge amount of information. Proper combination of the available information and effective control of the overall building system turns out to be a big challenge. In this study, we proposed a building indoor energy and comfort management model based on information fusion using ordered weighted averaging (OWA) aggregation. A multi-agent control system with heuristic intelligent optimization is developed to achieve a high level of comfort with the minimum power consumption. Case studies and simulation results are presented and discussed in this paper.

Gulf-Wide Information System, Environmental Sensitivity Index Shorebird Database, Geographic NAD83, LDWF (2001) [esi_shorebird_LDWF_2001

Data.gov (United States)

Louisiana Geographic Information Center — This data set contains sensitive biological resource data for shorebird species in coastal Louisiana. Vector polygons represent concentration areas and "hotspots"...

Report of the FAO Asian Region Workshop on Geographical Information Systems Applications in Aquaculture: Bangkok, Thailand, 5-23 December 1988

National Research Council Canada - National Science Library

1989-01-01

The objective of the Workshop was to train aquaculturists in the use of geographical information systems as a means to provide comprehensive information for policy and planning for aquaculture development...

Crowd-sourced data collection to support automatic classification of building footprint data

Science.gov (United States)

Hecht, Robert; Kalla, Matthias; Krüger, Tobias

2018-05-01

Human settlements are mainly formed by buildings with their different characteristics and usage. Despite the importance of buildings for the economy and society, complete regional or even national figures of the entire building stock and its spatial distribution are still hardly available. Available digital topographic data sets created by National Mapping Agencies or mapped voluntarily through a crowd via Volunteered Geographic Information (VGI) platforms (e.g. OpenStreetMap) contain building footprint information but often lack additional information on building type, usage, age or number of floors. For this reason, predictive modeling is becoming increasingly important in this context. The capabilities of machine learning allow for the prediction of building types and other building characteristics and thus, the efficient classification and description of the entire building stock of cities and regions. However, such data-driven approaches always require a sufficient amount of ground truth (reference) information for training and validation. The collection of reference data is usually cost-intensive and time-consuming. Experiences from other disciplines have shown that crowdsourcing offers the possibility to support the process of obtaining ground truth data. Therefore, this paper presents the results of an experimental study aiming at assessing the accuracy of non-expert annotations on street view images collected from an internet crowd. The findings provide the basis for a future integration of a crowdsourcing component into the process of land use mapping, particularly the automatic building classification.

Geographical information System - Tool for the administration of the services of basic sanitation and drinkable water

International Nuclear Information System (INIS)

Villegas A, Claudia; Figueroa V, Claudia; Betancur V, Teresita

2000-01-01

The utility a Geographic Information System (GIS), is to develop urbane zone in this case, in the Jardin Municipality many elements and tools are supporting the management of service of potable water and basic sanitation, which constitute components of Territorial Ordering Plane (TOP)

Energy Facility Siting by Means of Environmental Modelling with LANDSAT, Thematic Mapper and Geographic Information System (GIS) Data

Science.gov (United States)

1982-01-01

Currently based on ground and aerial surveys, the land cover data base of the Pennsylvania Power and Light Company is routinely used for modelling the effects of alternative generating plant and transmission line sites on the local and regional environment. The development of a satellite-based geographic information system would facilitate both the preparation of environmental impact statements by power companies and assessment of the data by the Nuclear Regulatory Commission. A cooperative project is planned to demonstrate the methodology for integrating satellite data into an existing geographic information system, d to further evaluate the ability of satellite data in modeling environmental conditions that would be applied in the preparation and assessment of environmental impact statements.

Extraction Method for Earthquake-Collapsed Building Information Based on High-Resolution Remote Sensing

International Nuclear Information System (INIS)

Chen, Peng; Wu, Jian; Liu, Yaolin; Wang, Jing

2014-01-01

At present, the extraction of earthquake disaster information from remote sensing data relies on visual interpretation. However, this technique cannot effectively and quickly obtain precise and efficient information for earthquake relief and emergency management. Collapsed buildings in the town of Zipingpu after the Wenchuan earthquake were used as a case study to validate two kinds of rapid extraction methods for earthquake-collapsed building information based on pixel-oriented and object-oriented theories. The pixel-oriented method is based on multi-layer regional segments that embody the core layers and segments of the object-oriented method. The key idea is to mask layer by layer all image information, including that on the collapsed buildings. Compared with traditional techniques, the pixel-oriented method is innovative because it allows considerably rapid computer processing. As for the object-oriented method, a multi-scale segment algorithm was applied to build a three-layer hierarchy. By analyzing the spectrum, texture, shape, location, and context of individual object classes in different layers, the fuzzy determined rule system was established for the extraction of earthquake-collapsed building information. We compared the two sets of results using three variables: precision assessment, visual effect, and principle. Both methods can extract earthquake-collapsed building information quickly and accurately. The object-oriented method successfully overcomes the pepper salt noise caused by the spectral diversity of high-resolution remote sensing data and solves the problem of same object, different spectrums and that of same spectrum, different objects. With an overall accuracy of 90.38%, the method achieves more scientific and accurate results compared with the pixel-oriented method (76.84%). The object-oriented image analysis method can be extensively applied in the extraction of earthquake disaster information based on high-resolution remote sensing

An Information-Theoretic Approach for Indirect Train Traffic Monitoring Using Building Vibration

Directory of Open Access Journals (Sweden)

Susu Xu

2017-05-01

Full Text Available This paper introduces an indirect train traffic monitoring method to detect and infer real-time train events based on the vibration response of a nearby building. Monitoring and characterizing traffic events are important for cities to improve the efficiency of transportation systems (e.g., train passing, heavy trucks, and traffic. Most prior work falls into two categories: (1 methods that require intensive labor to manually record events or (2 systems that require deployment of dedicated sensors. These approaches are difficult and costly to execute and maintain. In addition, most prior work uses dedicated sensors designed for a single purpose, resulting in deployment of multiple sensor systems. This further increases costs. Meanwhile, with the increasing demands of structural health monitoring, many vibration sensors are being deployed in commercial buildings. Traffic events create ground vibration that propagates to nearby building structures inducing noisy vibration responses. We present an information-theoretic method for train event monitoring using commonly existing vibration sensors deployed for building health monitoring. The key idea is to represent the wave propagation in a building induced by train traffic as information conveyed in noisy measurement signals. Our technique first uses wavelet analysis to detect train events. Then, by analyzing information exchange patterns of building vibration signals, we infer the category of the events (i.e., southbound or northbound train. Our algorithm is evaluated with an 11-story building where trains pass by frequently. The results show that the method can robustly achieve a train event detection accuracy of up to a 93% true positive rate and an 80% true negative rate. For direction categorization, compared with the traditional signal processing method, our information-theoretic approach reduces categorization error from 32.1 to 12.1%, which is a 2.5× improvement.

Application of geographic information systems to waste minimization efforts at Los Alamos National Laboratory

International Nuclear Information System (INIS)

Lyttle, T.W.; Smith, D.M.; Burns, M.; Weinrach, J.B.

1993-01-01

At Los Alamos National Laboratory (LANL), facility waste streams tend to be small but highly diverse. Initial characterization of such waste streams is often difficult in part due to a lack of tools to assist the generators themselves in completing such assessments. A methodology has been developed at LANL to allow process knowledgeable field personnel to develop baseline waste generation assessments and to evaluate potential waste minimization technology. This Process Waste Assessment (PWA) system is an application constructed within the Process Modeling System and currently being integrated with the InFoCAD Geographic Information System (GIS) . The Process Modeling System (PMS) is an object-oriented, mass balance-based, discrete-event simulation framework written using the Common Lisp Object System (CLOS) . Analytical capabilities supported within the PWA system include: complete mass balance specifications, historical characterization of selected waste streams and generation of facility profiles for materials consumption, resource utilization and worker exposure. Development activities include integration with the LANL facilities management Geographic Information System (GIS) and provisions for a Best Available Technologies (BAT) database. The environments used to develop these assessment tools will be discussed in addition to a review of initial implementation results

Gulf-Wide Information System, Environmental Sensitivity Index Alligator Database, Geographic NAD83, LDWF (2001) [esi_gator_LDWF_2001

Data.gov (United States)

Louisiana Geographic Information Center — This data set contains sensitive biological resource data for American alligator in coastal Louisiana. Vector polygons represent alligator habitats with nest density...

Gulf-Wide Information System, Environmental Sensitivity Index Habitats Database, Geographic NAD83, LDWF (2001) [esi_habitats_LDWF_2001

Data.gov (United States)

Louisiana Geographic Information Center — This data set contains sensitive biological resource data for coastal habitats in Louisiana. Vector polygons represent various habitats, including marsh types, other...

Gulf-Wide Information System, Environmental Sensitivity Index Crawfish Database, Geographic NAD83, LDWF (2001) [esi_crawfish_LDWF_2001

Data.gov (United States)

Louisiana Geographic Information Center — This data set contains sensitive biological resource data representing major concentration areas for harvested or potentially harvested crawfish and river shrimp in...

Web-Based Geographic Information Systems: Experience and Perspectives of Planners and the Implications for Extension

Science.gov (United States)

Göçmen, Z. Asligül

2016-01-01

Web-based geographic information system (GIS) technology, or web-based GIS, offers many opportunities for public planners and Extension educators who have limited GIS backgrounds or resources. However, investigation of its use in planning has been limited. The study described here examined the use of web-based GIS by public planning agencies. A…

Nation-wide, web-based, geographic information system for the integrated surveillance and control of dengue fever in Mexico.

Directory of Open Access Journals (Sweden)

Juan Eugenio Hernández-Ávila

Full Text Available Dengue fever incidence and its geographical distribution are increasing throughout the world. Quality and timely information is essential for its prevention and control. A web based, geographically enabled, dengue integral surveillance system (Dengue-GIS was developed for the nation-wide collection, integration, analysis and reporting of geo-referenced epidemiologic, entomologic, and control interventions data. Consensus in the design and practical operation of the system was a key factor for its acceptance. Working with information systems already implemented as a starting point facilitated its acceptance by officials and operative personnel. Dengue-GIS provides the geographical detail needed to plan, asses and evaluate the impact of control activities. The system is beginning to be adopted as a knowledge base by vector control programs. It is used to generate evidence on impact and cost-effectiveness of control activities, promoting the use of information for decision making at all levels of the vector control program. Dengue-GIS has also been used as a hypothesis generator for the academic community. This GIS-based model system for dengue surveillance and the experience gathered during its development and implementation could be useful in other dengue endemic countries and extended to other infectious or chronic diseases.

Animation as a Visual Indicator of Positional Uncertainty in Geographic Information

DEFF Research Database (Denmark)

Kessler, Carsten; Lotstein, Enid

2018-01-01

Effectively communicating the uncertainty that is inherent in any kind of geographic information remains a challenge. This paper investigates the efficacy of animation as a visual variable to represent positional uncertainty in a web mapping context. More specifically, two different kinds...... of animation (a ‘bouncing’ and a ‘rubberband’ effect) have been compared to two static visual variables (symbol size and transparency), as well as different combinations of those variables in an online experiment with 163 participants. The participants’ task was to identify the most and least uncertain point...... visualizations using symbol size and transparency. Somewhat contradictory to those results, the participants showed a clear preference for those static visualizations....

GI+100: Long Term Preservation of Digital Geographic Information - 16 Fundamental Principles Agreed by National Mapping Agencies and State Archives

Directory of Open Access Journals (Sweden)

Carsten Carsten Rönsdorf

2017-05-01

There are many reasons why people wish to retain access to information, though the main drivers for archiving digital geographic information include meeting legislative requirements; the short and long term exploitation of archived data for analyzing social, environmental (e.g. global climate changes and economic changes over time; as well as efficiency savings in managing superseded datasets. This paper sets out the path and describes what needs to be done now to future-proof the investment government agencies around the world have made in creating digital geographic data.

Geographical information systems (GIS), a great tool for urban silviculture

International Nuclear Information System (INIS)

Otaya Burbano, Leodan Andres; Sanchez Zapata, Robinson de Jesus; Morales Soto, Leon; Botero Fernandez, Veronica

2006-01-01

As a pilot phase, to acquire experience, define methodologies and determine the advantages of Geographical Information Systems (GIS) for applying to urban silviculture and inventory, diagnosis, management plan and economic appraisal were made for the urban forest in the Magnolia neighborhood of the Envigado municipality, department of Antioquia, Colombia. for the management and analysis of the data collected in field, a database was designed using the software microsoft Access. The species inventoried were mapped digitally and the conditions there were analyzed using some tools and extensions of technological architecture ArcGIS 8.3 such as: characteristics, silviculture practices required, and environmental conflicts. It was determined that the GIS analysis of the urban forest conducted for a specific neighborhood can be a tool that permits environmental authorities and interested researchers to have agile and easy access to the information stored in it; it permits programming of required silviculture activities; it also permits having a general vision of the urban forest according to the infrastructure of the neighborhood, complemented by photographs of the area for improved illustration; it permits the inclusion or elimination of information in a rapid and simple manner, thus facilitating decision making with relation to management of the urban woodland and for comparison with other similar studies

Geographic Information Systems-Transportation ISTEA management systems server-net prototype pooled fund study: Phase B summary

Energy Technology Data Exchange (ETDEWEB)

Espinoza, J. Jr.; Dean, C.D.; Armstrong, H.M. [and others

1997-06-01

The Geographic Information System-Transportation (GIS-T) ISTEA Management Systems Server Net Prototype Pooled Fund Study represents the first national cooperative effort in the transportation industry to address the management and monitoring systems as well as the statewide and metropolitan transportation planning requirements of the Intermodal Surface Transportation Efficiency Act of 1991 (ISTEA). The Study was initiated in November 1993 through the Alliance for Transportation Research and under the leadership of the New Mexico State Highway and Transportation Department. Sandia National Laboratories, an Alliance partner, and Geographic Paradigm Computing. Inc. provided technical leadership for the project. In 1992, the Alliance for Transportation Research, the New Mexico State Highway and Transportation Department, Sandia National Laboratories, and Geographic Paradigm Computing, Inc., proposed a comprehensive research agenda for GIS-T. That program outlined a national effort to synthesize new transportation policy initiatives (e.g., management systems and Intelligent Transportation Systems) with the GIS-T server net ideas contained in the NCHRP project {open_quotes}Adaptation of GIS to Transportation{close_quotes}. After much consultation with state, federal, and private interests, a project proposal based on this agenda was prepared and resulted in this Study. The general objective of the Study was to develop GIS-T server net prototypes supporting the ISTEA requirements for transportation planning and management and monitoring systems. This objective can be further qualified to: (1) Create integrated information system architectures and design requirements encompassing transportation planning activities and data. (2) Encourage the development of functional GIS-T server net prototypes. (3) Demonstrate multiple information systems implemented in a server net environment.

Use of geographic information systems for applications on gas pipeline rights-of-way

Energy Technology Data Exchange (ETDEWEB)

Sydelko, P.J.; Wilkey, P.L.

1992-12-01

Geographic information system (GIS) applications for the siting and monitoring of gas pipeline rights-of-way (ROWS) were developed for areas near Rio Vista, California. The data layers developed for this project represent geographic features, such as landcover, elevation, aspect, slope, soils, hydrography, transportation, endangered species, wetlands, and public line surveys. A GIS was used to develop and store spatial data from several sources; to manipulate spatial data to evaluate environmental and engineering issues associated with the siting, permitting, construction, maintenance, and monitoring of gas pipeline ROWS; and to graphically display analysis results. Examples of these applications include (1) determination of environmentally sensitive areas, such as endangered species habitat, wetlands, and areas of highly erosive soils; (2) evaluation of engineering constraints, including shallow depth to bedrock, major hydrographic features, and shallow water table; (3) classification of satellite imagery for landuse/landcover that will affect ROWS; and (4) identification of alternative ROW corridors that avoid environmentally sensitive areas or areas with severe engineering constraints.

Gulf-Wide Information System, Environmental Sensitivity Index Marsh, Geographic NAD83, LDWF (2001) [esi_fresh_marsh_LDWF_2001

Data.gov (United States)

Louisiana Geographic Information Center — This data set contains Environmental Sensitivity Index (ESI) fresh marsh data of coastal Louisiana. The ESI is a classification and ranking system, which...

Gulf-Wide Information System, Environmental Sensitivity Index Bear Database, Geographic NAD83, LDWF (2001) [esi_bear_LDWF_2001

Data.gov (United States)

Louisiana Geographic Information Center — This data set contains sensitive biological resource data for the Louisiana black bear in coastal Louisiana. Vector polygons represent occupied habitat for this...

Gulf-Wide Information System, Environmental Sensitivity Index Waterfowl Database, Geographic NAD83, LDWF (2001) [esi_waterfowl_LDWF_2001

Data.gov (United States)

Louisiana Geographic Information Center — This data set contains sensitive biological resource data for waterfowl species in coastal Louisiana. Vector polygons in this data represent waterfowl habitats with...

[Spatial distribution of occupational disease prevalence in Guangzhou and Foshan city by geographic information system].

Science.gov (United States)

Tan, Q; Tu, H W; Gu, C H; Li, X D; Li, R Z; Wang, M; Chen, S G; Cheng, Y J; Liu, Y M

2017-11-20

Objective: To explore the occupational disease spatial distribution characteristics in Guangzhou and Foshan city in 2006-2013 with Geographic Information System and to provide evidence for making control strategy. Methods: The data on occupational disease diagnosis in Guangzhou and Foshan city from 2006 through 2013 were collected and linked to the digital map at administrative county level with Arc GIS12.0 software for spatial analysis. Results: The maps of occupational disease and Moran's spatial autocor-relation analysis showed that the spatial aggregation existed in Shunde and Nanhai region with Moran's index 1.727, -0.003. Local Moran's I spatial autocorrelation analysis pointed out the "positive high incidence re-gion" and the "negative high incidence region" during 2006~2013. Trend analysis showed that the diagnosis case increased slightly then declined from west to east, increase obviously from north to south, declined from? southwest to northeast, high in the middle and low on both sides in northwest-southeast direction. Conclusions: The occupational disease is obviously geographical distribution in Guangzhou and Foshan city. The corresponding prevention measures should be made according to the geographical distribution.

Dynamic management of geographic data in a virtual environment

NARCIS (Netherlands)

Jense, G.J.; Donkers, K.

1996-01-01

In order to achieve true 3D user interaction with geographic information, an interface between a virtual environment system and a geographic information system has been designed and implemented. This VE/GIS interface is based on a loose coupling of the underlying geographic database and the virtual

BUILDING A GEOGRAPHIC DATA REPOSITORY FOR URBAN RESEARCH WITH FREE SOFTWARE – LEARNING FROM Observatorio.CEDEUS.cl

Directory of Open Access Journals (Sweden)

S. Steiniger

2017-07-01

Full Text Available The recent trend towards open data and open science as well as a demand for holistic and interdisciplinary research requires platforms that allow the distribution and exchange of research data, including geographic information. While the requirements and benefits of data exchange are widely discussed, there are few proposals on how to implement data platforms that not only permit the exchange of research data among researchers, but also permit to distribute research results and data to the interest public. We elaborate what points are important for implementing a (geographic data repository and propose then to adopt the concept of Spatial Data Infrastructures (SDI as a solution for the implementation of research data repositories. We present as a case study the geographic data and document repository of the Chilean research Centre on Sustainable Urban Development (CEDEUS, the CEDEUS Observatory. Besides the infrastructure to host and distribute data, communication tools are an important component of such a data repository service. For this case study we analyse which things have worked well and which things have not worked well based on the experiences collected during three years of operation. We close with some recommendations for the implementation of data repositories for research.

Geographical information system analysis for oceanographic parameters in the coastal waters of Goa, India - A case study

Digital Repository Service at National Institute of Oceanography (India)

Suryanarayana, A.; Joglekar, V.V.

A geographical information system (GIS) is used to create oceanography database and to do the spatial analysis of physical, chemical and biological characteristics of the coastal waters of Goa, India. Vector maps depicting distributions of currents...

Simple Rules for an Efficient Use of Geographic Information Systems in Molecular Ecology

Directory of Open Access Journals (Sweden)

Kevin Leempoel

2017-04-01

Full Text Available Geographic Information Systems (GIS are becoming increasingly popular in the context of molecular ecology and conservation biology thanks to their display options efficiency, flexibility and management of geodata. Indeed, spatial data for wildlife and livestock species is becoming a trend with many researchers publishing genomic data that is specifically suitable for landscape studies. GIS uniquely reveal the possibility to overlay genetic information with environmental data and, as such, allow us to locate and analyze genetic boundaries of various plant and animal species or to study gene-environment associations (GEA. This means that, using GIS, we can potentially identify the genetic bases of species adaptation to particular geographic conditions or to climate change. However, many biologists are not familiar with the use of GIS and underlying concepts and thus experience difficulties in finding relevant information and instructions on how to use them. In this paper, we illustrate the power of free and open source GIS approaches and provide essential information for their successful application in molecular ecology. First, we introduce key concepts related to GIS that are too often overlooked in the literature, for example coordinate systems, GPS accuracy and scale. We then provide an overview of the most employed open-source GIS-related software, file formats and refer to major environmental databases. We also reconsider sampling strategies as high costs of Next Generation Sequencing (NGS data currently diminish the number of samples that can be sequenced per location. Thereafter, we detail methods of data exploration and spatial statistics suited for the analysis of large genetic datasets. Finally, we provide suggestions to properly edit maps and to make them as comprehensive as possible, either manually or trough programming languages.

Research of building information extraction and evaluation based on high-resolution remote-sensing imagery

Science.gov (United States)

Cao, Qiong; Gu, Lingjia; Ren, Ruizhi; Wang, Lang

2016-09-01

Building extraction currently is important in the application of high-resolution remote sensing imagery. At present, quite a few algorithms are available for detecting building information, however, most of them still have some obvious disadvantages, such as the ignorance of spectral information, the contradiction between extraction rate and extraction accuracy. The purpose of this research is to develop an effective method to detect building information for Chinese GF-1 data. Firstly, the image preprocessing technique is used to normalize the image and image enhancement is used to highlight the useful information in the image. Secondly, multi-spectral information is analyzed. Subsequently, an improved morphological building index (IMBI) based on remote sensing imagery is proposed to get the candidate building objects. Furthermore, in order to refine building objects and further remove false objects, the post-processing (e.g., the shape features, the vegetation index and the water index) is employed. To validate the effectiveness of the proposed algorithm, the omission errors (OE), commission errors (CE), the overall accuracy (OA) and Kappa are used at final. The proposed method can not only effectively use spectral information and other basic features, but also avoid extracting excessive interference details from high-resolution remote sensing images. Compared to the original MBI algorithm, the proposed method reduces the OE by 33.14% .At the same time, the Kappa increase by 16.09%. In experiments, IMBI achieved satisfactory results and outperformed other algorithms in terms of both accuracies and visual inspection

Building Materials, Ionizing Radiation and HBIM: A Case Study from Pompei (Italy

Directory of Open Access Journals (Sweden)

Pasquale Argenziano

2018-01-01

Full Text Available This paper presents a different point of view on the conservation of the built heritage, adding ionizing radiation to the most well-known digital documentation dataset. Igneous building materials characterize most of the built heritage in the Campania region, and in a large part of southern Italy. The ionizing radiations proceeding from these materials can produce stochastic biological effects on the exposed living beings. The research team designed and tested a technical-scientific protocol to survey and analyse this natural phenomenon in association with the use of geological material for building purposes. Geographical Information Systems (GISs, City Information Modelling (CIM, and Building Information Modelling (BIM are the digital tools used to manage the construction entities and their characteristics, and then to represent the thematic data as false-colour images. The emission spectra of fair-faced or plastered materials as a fingerprint of their nature is proposed as a non-invasive method. Due to both the huge presence of historical buildings and an intense touristic flow, the main square of Pompei has been selected as a study area.

The Contribution of Geographic Information Systems (GIS) to Geography Education and Secondary School Students' Attitudes Related to GIS

Science.gov (United States)

Artvinli, Eyup

2010-01-01

The purpose of this study is to determine the place of Geographic Information Systems (GIS) in teaching geography, the general level of secondary school students' attitudes towards Geography Information Systems and whether this changes according to different variables. The population of the research consists of the students studying in Istanbul,…

On the Use of Geographic Information in Humanities Research Infrastructure: A Case Study on Cultural Heritage

Directory of Open Access Journals (Sweden)

Albina Mościcka

2018-03-01

Full Text Available As an invaluable source of knowledge about the past, cultural heritage may be an important element of the humanities research infrastructure, along with other elements, such as spatial references. Therefore, this paper attempts to provide an answer to the questions concerning the ways in which spatial information can contribute to the development of this infrastructure and the aspects of storytelling based on cultural resources that can be supported by such infrastructure. The objective of the methodology that was used was to combine the aspects that refer to spatial information and cultural items into a single, common issue, and to describe them in a formalized way with use of Unified Modeling Language (UML. As a result, the study presents a proposal of the Humanities Infrastructure Architecture based on spatially-oriented movable cultural items, taking into account their use in the context of interoperability, along with the concept of creating spatial databases that would include movable monuments. The authors also demonstrate that the ISO 19100 series of geographical information standards may be a source of interesting conceptual solutions that may be used in the process of the standardization of geographical information that was recorded in the descriptions of cultural heritage items in form of metadata and data structure descriptions.

The National Geographic Names Data Base: Phase II instructions

Science.gov (United States)

Orth, Donald J.; Payne, Roger L.

1987-01-01

The Geographic Names Information System is a computer-based information system developed to meet major national needs by providing information for named entities in the United States, its territories, and outlying areas. The National Geographic Names Data Base, a component of the Geographic Names Information System, currently contains most names and associated information recorded on the 1:24,000-scale (or largest scale available) topographic maps of the U.S. Geological Survey. The work involved in this initial compilation of names shown on the topographic-map series, and the development and editing of the National Geographic Names Data Base, is referred to as Phase I. Optimal use and effectiveness of an automated names system require that the names of features

Gulf-Wide Information System, Environmental Sensitivity Index Survey Boundaries, Geographic NAD83, LDWF (2001) [esi_survey_LDWF_2001

Data.gov (United States)

Louisiana Geographic Information Center — This data set contains vector polygons representing survey boundaries for the various data collection efforts used as sources in the larger Louisiana G-WIS database....

Public Perception on Disaster Management Using Volunteered Geographic Information (vgi): Case of Uae

Science.gov (United States)

Yagoub, M. M.

2015-10-01

The number of smart phones that are supported by location facility like Global Positioning System (GPS), Camera and connected to the internet has increased sharply in UAE during the last five years. This increase offers a chance to capitalize on using these devices as resources for data collection, therefore reducing cost. In many cases specific events may happen in areas or at time where there may be no governmental departments to collect such unrepeated events. The current research will showcase various studies that had been conducted on Volunteered Geographic Information (VGI) debating various aspects such as accuracy, legal issues, and privacy. This research will also integrate Geographic Information System (GIS), VGI, social media tools, data mining, and mobile technology to design a conceptual framework for promoting public participation in UAE. The data gathered through survey will be helpful in correlating various aspects of VGI. Since there are diverse views about these aspects, policy makers are left undecided in many countries about how to deal with VGI. The assessment of the UAE case will contribute to the age-long debate by examining the willingness of the public to participate. The result will show the public perception to be as sensors for data collection. Additionally, the potential of citizen involvement in the risk and disaster management process by providing voluntary data collected for VGI applications will also be explored in the paper.

Air pollution simulation and geographical information systems (GIS) applied to Athens International Airport.

Science.gov (United States)

Theophanides, Mike; Anastassopoulou, Jane

2009-07-01

This study presents an improved methodology for analysing atmospheric pollution around airports using Gaussian-plume numerical simulation integrated with Geographical Information Systems (GIS). The new methodology focuses on streamlining the lengthy analysis process for Airport Environmental Impact Assessments by integrating the definition of emission sources, simulating and displaying the results in a GIS environment. One of the objectives of the research is to validate the methodology applied to the Athens International Airport, "Eleftherios Venizelos", to produce a realistic estimate of emission inventories, dispersion simulations and comparison to measured data. The methodology used a combination of the Emission Dispersion and Modelling System (EDMS) and the Atmospheric Dispersion and Modelling system (ADMS) to improve the analysis process. The second objective is to conduct numerical simulations under various adverse conditions (e.g. scenarios) and assess the dispersion in the surrounding areas. The study concludes that the use of GIS in environmental assessments provides a valuable advantage for organizing data and entering accurate geographical/topological information for the simulation engine. Emissions simulation produced estimates within 10% of published values. Dispersion simulations indicate that airport pollution will affect neighbouring cities such as Rafina and Loutsa. Presently, there are no measured controls in these areas. In some cases, airport pollution can contribute to as much as 40% of permissible EU levels in VOCs.

Gulf-Wide Information System, Environmental Sensitivity Index Dispersant Preapproval Zone, Geographic NAD83, LDWF (2001) [esi_dispersant_preapproval_zone_LDWF_2001

Data.gov (United States)

Louisiana Geographic Information Center — This data set contains dispersant preapproval zones in coastal Louisiana. Feature-specific contact, type, and source information are stored in relational data tables...

Gulf-Wide Information System, Environmental Sensitivity Index In-Situ Burning Database, Geographic NAD83, LDWF (2001) [esi_in_situ_LDWF_2001

Data.gov (United States)

Louisiana Geographic Information Center — This data set contains boundaries for in-situ burning preapproval and exclusion areas in coastal Louisiana. Feature-specific contact, type, and source information...

Using geographic information systems to identify prospective marketing areas for a special library.

Science.gov (United States)

McConnaughy, Rozalynd P; Wilson, Steven P

2006-05-04

The Center for Disability Resources (CDR) Library is the largest collection of its kind in the Southeastern United States, consisting of over 5,200 books, videos/DVDs, brochures, and audiotapes covering a variety of disability-related topics, from autism to transition resources. The purpose of the library is to support the information needs of families, faculty, students, staff, and other professionals in South Carolina working with individuals with disabilities. The CDR Library is funded on a yearly basis; therefore, maintaining high usage is crucial. A variety of promotional efforts have been used to attract new patrons to the library. Anyone in South Carolina can check out materials from the library, and most of the patrons use the library remotely by requesting materials, which are then mailed to them. The goal of this project was to identify areas of low geographic usage as a means of identifying locations for future library marketing efforts. Nearly four years worth of library statistics were compiled in a spreadsheet that provided information per county on the number of checkouts, the number of renewals, and the population. Five maps were created using ArcView GIS software to create visual representations of patron checkout and renewal behavior per county. Out of the 46 counties in South Carolina, eight counties never checked out materials from the library. As expected urban areas and counties near the library's physical location have high usage totals. The visual representation of the data made identification of low usage regions easier than using a standalone database with no visual-spatial component. The low usage counties will be the focus of future Center for Disability Resources Library marketing efforts. Due to the impressive visual-spatial representations created with Geographic Information Systems, which more efficiently communicate information than stand-alone database information can, librarians may benefit from the software's use as a

Applications of geographic information systems (GIS) for highway traffic noise analysis : case studies of select transportation agencies

Science.gov (United States)

2012-11-30

Noise from highway traffic can be pervasive in areas near roadways. How and to what extent noise travels is strongly influenced by geospatial features such as terrain and elevation. Thus geographic information systems (GIS), which enable users to mor...

Integrating remote sensing, geographic information system and modeling for estimating crop yield

Science.gov (United States)

Salazar, Luis Alonso

This thesis explores various aspects of the use of remote sensing, geographic information system and digital signal processing technologies for broad-scale estimation of crop yield in Kansas. Recent dry and drought years in the Great Plains have emphasized the need for new sources of timely, objective and quantitative information on crop conditions. Crop growth monitoring and yield estimation can provide important information for government agencies, commodity traders and producers in planning harvest, storage, transportation and marketing activities. The sooner this information is available the lower the economic risk translating into greater efficiency and increased return on investments. Weather data is normally used when crop yield is forecasted. Such information, to provide adequate detail for effective predictions, is typically feasible only on small research sites due to expensive and time-consuming collections. In order for crop assessment systems to be economical, more efficient methods for data collection and analysis are necessary. The purpose of this research is to use satellite data which provides 50 times more spatial information about the environment than the weather station network in a short amount of time at a relatively low cost. Specifically, we are going to use Advanced Very High Resolution Radiometer (AVHRR) based vegetation health (VH) indices as proxies for characterization of weather conditions.

Energy use in office buildings

Energy Technology Data Exchange (ETDEWEB)

None

1980-10-01

This is the report on Task IB, Familiarization with Additional Data Collection Plans of Annual Survey of BOMA Member and Non-Member Buildings in 20 Cities, of the Energy Use in Office Buildings project. The purpose of the work was to monitor and understand the efforts of the Building Owners and Managers Association International (BOMA) in gathering an energy-use-oriented data base. In order to obtain an improved data base encompassing a broad spectrum of office space and with information suitable for energy analysis in greater detail than is currently available, BOMA undertook a major data-collection effort. Based on a consideration of geographic area, climate, population, and availability of data, BOMA selected twenty cities for data collection. BOMA listed all of the major office space - buildings in excess of 40,000 square feet - in each of the cities. Tax-assessment records, local maps, Chamber of Commerce data, recent industrial-development programs, results of related studies, and local-realtor input were used in an effort to assemble a comprehensive office-building inventory. In order to verify the accuracy and completeness of the building lists, BOMA assembled an Ad-Hoc Review Committee in each city to review the assembled inventory of space. A questionnaire on office-building energy use and building characteristics was developed. In each city BOMA assembled a data collection team operating under the supervision of its regional affiliate to gather the data. For each city a random sample of buildings was selected, and data were gathered. Responses for over 1000 buildings were obtained.

Information-representation methods and tools or the Smart Swap Building strategic project

Directory of Open Access Journals (Sweden)

Marco Medici

2016-06-01

Full Text Available  Within the Smart Swap Building project for the housing renewal, the representative tool is an integrated part of the building design process and becomes an element to support complex decision-making processes, integrating different skills in different stages of the building life cycle. The use of Building Information Modeling (BIM tools not only allow a transparent design phase but covers the whole building process, relating technological and structural elements with construction scheduling (4D, cost estimation (5D, certification (6D and management of the life cycle (7D + CAFM, allowing more sustainable and aware choices.

The Tasks of the Crowd: A Typology of Tasks in Geographic Information Crowdsourcing and a Case Study in Humanitarian Mapping

Directory of Open Access Journals (Sweden)

João Porto de Albuquerque

2016-10-01

Full Text Available In the past few years, volunteers have produced geographic information of different kinds, using a variety of different crowdsourcing platforms, within a broad range of contexts. However, there is still a lack of clarity about the specific types of tasks that volunteers can perform for deriving geographic information from remotely sensed imagery, and how the quality of the produced information can be assessed for particular task types. To fill this gap, we analyse the existing literature and propose a typology of tasks in geographic information crowdsourcing, which distinguishes between classification, digitisation and conflation tasks. We then present a case study related to the “Missing Maps” project aimed at crowdsourced classification to support humanitarian aid. We use our typology to distinguish between the different types of crowdsourced tasks in the project and choose classification tasks related to identifying roads and settlements for an evaluation of the crowdsourced classification. This evaluation shows that the volunteers achieved a satisfactory overall performance (accuracy: 89%; sensitivity: 73%; and precision: 89%. We also analyse different factors that could influence the performance, concluding that volunteers were more likely to incorrectly classify tasks with small objects. Furthermore, agreement among volunteers was shown to be a very good predictor of the reliability of crowdsourced classification: tasks with the highest agreement level were 41 times more probable to be correctly classified by volunteers. The results thus show that the crowdsourced classification of remotely sensed imagery is able to generate geographic information about human settlements with a high level of quality. This study also makes clear the different sophistication levels of tasks that can be performed by volunteers and reveals some factors that may have an impact on their performance.

Hackathons as A Capacity Building Tool for Environmental Applications

Science.gov (United States)

Bye, B. L.; Mildorf, T.; Charvat, K.; Berre, A. J.

2017-12-01

Today's society requires easy, reliable and quick access to environmental information published by various organizations and initiatives. The environment questions require many activities that produce various sorts of data; by authorities through operation of instruments such as satellites, and through informal local and community activities producing videos, photos or oral stories. The collected information can contribute to up-to-date data. Volunteered geographic information (VGI) is the harnessing of tools to create, assemble, and disseminate geographic data provided voluntarily by individuals. Under the INSPIRE (Infrastructure for spatial information in Europe) umbrella, a number of EU projects co-organize hackathons - the INSPIRE Hack. The INSPIRE Hack focuses on methods where citizens are able to contribute to different environmental and societal issues through smart phones and other sensors. The INSPIRE Hack supports creativity, innovation, technical capabilities and knowledge sharing by combining open data, VGI, and data from citizens observatories or other citizen science activities. This presentation offer a capacity building perspective on the INSPIRE hackathons, the co-design aspects and the argility with respect to the accelerating technological and social innovations, and effective up-take in societal use. Starting in Europe, the concept can be broadened to encompass all continents.

Land use changes in Pak Phanang Basin using satellite images and geographic information system

Directory of Open Access Journals (Sweden)

Yongchalermchai, C.

2004-01-01

Full Text Available This study defined major changes in land use in Pak Phanang Basin, Nakhon Si Thammarat Province by using remote sensing and geographic information system techniques. The land use map conducted by Department of Land Development in 1988 was compared with the land use map interpreted from satelliteimages of Landsat-5 TM acquired in 1995 and 1999. The results revealed that between 1988 to 1999, forest area in the basin decreased by a total of 98.08 km2, a drastic decline of 60% that was changed to rubber plantation area. The rubber area increased about 181.7 km2 or 41%. Shrimp farm area increased by 184.87 km2, equivalent to a high increase of 886% while paddy field area decreased by 248.7 km2, or 16% that was converted to shrimp farm and rubber land. A decline in forest area caused soil erosion. The severe expansion of shrimp farm area caused the salinity and affected nearby paddy field and water source areas, that resulted in degradation of the environment. Application of remote sensing and geographic information system was utilized as a tool for monitoring the land use change and planning proper resource utilization for sustainable development in Pak Phanang Basin.

Intelligent tools for building a scientific information platform from research to implementation

CERN Document Server

Skonieczny, Łukasz; Rybiński, Henryk; Kryszkiewicz, Marzena; Niezgódka, Marek

2014-01-01

This book is a selection of results obtained within three years of research performed under SYNAT—a nation-wide scientific project aiming at creating an infrastructure for scientific content storage and sharing for academia, education and open knowledge society in Poland. The book is intended to be the last of the series related to the SYNAT project. The previous books, titled “Intelligent Tools for Building a Scientific Information Platform” and “Intelligent Tools for Building a Scientific Information Platform: Advanced Architectures and Solutions”, were published as volumes 390 and 467 in Springer's Studies in Computational Intelligence. Its contents is based on the SYNAT 2013 Workshop held in Warsaw. The papers included in this volume present an overview and insight into information retrieval, repository systems, text processing, ontology-based systems, text mining, multimedia data processing and advanced software engineering, addressing the problems of implementing intelligent tools for building...

Technology Use in Rwandan Secondary Schools: An Assessment of Teachers' Attitudes towards Geographic Information Systems (GIS)

Science.gov (United States)

Akinyemi, Felicia O.

2016-01-01

Technology use is evident in all spheres of human endeavour. Focusing on technology use in education, this paper examines teachers' attitudes towards geographic information system (GIS). An assessment was made of GIS teachers in Rwandan secondary schools. Key areas covered include how GIS is implemented in schools, teachers' attitudes and…

An Assessment of the Use of Geographical Information Systems (GIS) in Teaching Geography in Singapore Schools

Science.gov (United States)

Yap, Lee Yong; Tan, Geok Chin Ivy; Zhu, Xuan; Wettasinghe, Marissa C.

2008-01-01

In 1998, geographical information systems (GIS) were introduced to secondary schools in Singapore as a tool for teaching geography at the secondary and junior college levels. However, general observations and feedback from school teachers suggested that only a small number of secondary schools and junior colleges in Singapore were actually using…

U Plant Geographic Zone Cleanup Prototype

International Nuclear Information System (INIS)

Romine, L.D.; Leary, K.D.; Lackey, M.B.; Robertson, J.R.

2006-01-01

The U Plant geographic zone (UPZ) occupies 0.83 square kilometers on the Hanford Site Central Plateau (200 Area). It encompasses the U Plant canyon (221-U Facility), ancillary facilities that supported the canyon, soil waste sites, and underground pipelines. The UPZ cleanup initiative coordinates the cleanup of the major facilities, ancillary facilities, waste sites, and contaminated pipelines (collectively identified as 'cleanup items') within the geographic zone. The UPZ was selected as a geographic cleanup zone prototype for resolving regulatory, technical, and stakeholder issues and demonstrating cleanup methods for several reasons: most of the area is inactive, sufficient characterization information is available to support decisions, cleanup of the high-risk waste sites will help protect the groundwater, and the zone contains a representative cross-section of the types of cleanup actions that will be required in other geographic zones. The UPZ cleanup demonstrates the first of 22 integrated zone cleanup actions on the Hanford Site Central Plateau to address threats to groundwater, the environment, and human health. The UPZ contains more than 100 individual cleanup items. Cleanup actions in the zone will be undertaken using multiple regulatory processes and decision documents. Cleanup actions will include building demolition, waste site and pipeline excavation, and the construction of multiple, large engineered barriers. In some cases, different cleanup actions may be taken at item locations that are immediately adjacent to each other. The cleanup planning and field activities for each cleanup item must be undertaken in a coordinated and cohesive manner to ensure effective execution of the UPZ cleanup initiative. The UPZ zone cleanup implementation plan (ZCIP) [1] was developed to address the need for a fundamental integration tool for UPZ cleanup. As UPZ cleanup planning and implementation moves forward, the ZCIP is intended to be a living document that will

The Use of Geographic Information Systems in Public Services

Directory of Open Access Journals (Sweden)

Vladimir Senic

2017-12-01

Full Text Available With the further development of information and communication technology and a growing use of smart phones, the significance of Geographic Information System - GIS will indisputably continue to grow. This is supported by the fact that in the last decade geotechnology has been identified as one of the fastest growing technologies, along with biotechnology and nanotechnology. Even though GIS is increasingly being utilized in the Republic of Serbia, it appears that its use with some providers of public services is mainly deduced to showing spatial data with quite limited possibilities for a further analysis - which represents the essence of the use of GIS. The scope of this paper is to stress the outstanding analytical potential that GIS has in the domain of offering and improving various public services in the Republic of Serbia. The paper uses the examples of good practice in the sphere of the health system, public safety, rescue services and local government. The covered examples show that the use of the analytical component of GIS in everyday activities of the mentioned public services can make their work not only more transparent to the public, but considerably more efficient as well. This way, the analytical component of GIS enables decision-makers to improve the management of frequently limited available resources, while proving a higher level of the service quality to citizens as the final users.

Volunteered Geographic Information: Interpretation, Visualisation and Social Computing (VGIscience)

Science.gov (United States)

Burghardt, Dirk; Nejdl, Wolfgang; Schiewe, Jochen; Sester, Monika

2018-05-01

In the past years Volunteered Geographic Information (VGI) has emerged as a novel form of user-generated content, which involves active generation of geo-data for example in citizen science projects or during crisis mapping as well as the passive collection of data via the user's location-enabled mobile devices. In addition there are more and more sensors available that detect our environment with ever greater detail and dynamics. These data can be used for a variety of applications, not only for the solution of societal tasks such as in environment, health or transport fields, but also for the development of commercial products and services. The interpretation, visualisation and usage of such multi-source data is challenging because of the large heterogeneity, the differences in quality, the high update frequencies, the varying spatial-temporal resolution, subjective characteristics and low semantic structuring. Therefore the German Research Foundation has launched a priority programme for the next 3-6 years which will support interdisciplinary research projects. This priority programme aims to provide a scientific basis for raising the potential of VGI- and sensor data. Research questions described more in detail in this short paper span from the extraction of spatial information, to the visual analysis and knowledge presentation, taking into account the social context while collecting and using VGI.

Implementation of a geographical information system in nuclear emergencies

International Nuclear Information System (INIS)

Sadaniowski, I.; Telleria, D.; Jordan, O.; Bruno, H.; Boutet, L.; Hernandez, D.

2006-01-01

From 2003, the Nuclear Regulatory Authority (RNA) has worked in the implementation of a Geographical Information System (SIG) for the planning and the intervention in emergencies, with special emphasis in the nuclear emergencies. The main objective of the SIG developed in the ARN is to give the necessary support for the planning, training and application of the actions of radiological protection necessary in front of a nuclear emergency, offering the geo referenced cartographic base, the readiness of logistical resources in the whole country, incorporating results of models of forecast of consequences and environmental measurements during the emergency, facilitating the analysis of this information in real time and facilitating the presentation of results for the decision making. The cartographic base is constituted of demographic, social, economic data identification of main actors interveners in the emergency, vial infrastructure and natural characteristics of the area in question. In this work the main characteristics of the implemented SIG are presented including the conceptual standards of design that contemplate the international requirements for the planning and answer in the event of nuclear emergencies, the current state of the system and the foreseen evolution. A description of the opposing problems during its implementation that can be common to many countries of the region is also presented, as well as the obtained experience of its use in preparation tasks for emergencies and in mocks. (Author)

An introduction to geographic information systems as applied to a groundwater remediation program

International Nuclear Information System (INIS)

Hammock, J.K.; Lorenz, R.

1989-01-01

While the attention to environmental issues has grown over the past several years, so has the focus on groundwater protection. Addressing the task of groundwater remediation often involves a large-scale program with numerous wells and enormous amounts of data. This data must be manipulated and analyzed in an efficient manner for the remediation program to be truly effective. Geographic Information System's (GIS) have proven to be an extremely effective tool in handling and interpreting this type of groundwater information. The purpose of this paper is to introduce the audience to GIS technology, describe how it is being used at the Savannah River Site (SRS) to handle groundwater data and demonstrate how it may be used in the corporate Westinghouse environment

DEVELOPMENT OF A CARBON MANAGEMENT GEOGRAPHIC INFORMATION SYSTEM (GIS) FOR THE UNITED STATES

Energy Technology Data Exchange (ETDEWEB)

Howard J. Herzog

2004-03-01

The Lab for Energy and Environment (LFEE) at MIT is developing a Geographic Information System (GIS) for carbon management. The GIS will store, integrate, and manipulate information relating to the components of carbon management systems. Additionally, the GIS can be used to interpret and analyze the effect of developing these systems. In the first year of this three year project, we focused on two tasks: (1) specifying the system design--defining in detail the GIS data requirements, the types of analyses that can be conducted, and the forms of output we will produce, as well as designing the computer architecture of the GIS and (2) creating the ''core'' datasets--identifying data sources and converting them into a form accessible by the GIS.

Integrated management of information inside maintenance processes. From the building registry to BIM systems

Directory of Open Access Journals (Sweden)

Cinzia Talamo

2014-10-01

Full Text Available The paper presents objec- tives, methods and results of two researches dealing with the improvement of integrated information management within maintenance processes. Focusing on information needs regarding the last phases of the building process, the two researches draft approaches characterizing a path of progressive improve- ment of strategies for integration: from a building registry, unique for the whole construction process, to an integrated management of the building process with the support of BIM systems.

Modelling Participatory Geographic Information System for Customary Land Conflict Resolution

Science.gov (United States)

Gyamera, E. A.; Arko-Adjei, A.; Duncan, E. E.; Kuma, J. S. Y.

2017-11-01

Since land contributes to about 73 % of most countries Gross Domestic Product (GDP), attention on land rights have tremendously increased globally. Conflicts over land have therefore become part of the major problems associated with land administration. However, the conventional mechanisms for land conflict resolution do not provide satisfactory result to disputants due to various factors. This study sought to develop a Framework of using Participatory Geographic Information System (PGIS) for customary land conflict resolution. The framework was modelled using Unified Modelling Language (UML). The PGIS framework, called butterfly model, consists of three units namely, Social Unit (SU), Technical Unit (TU) and Decision Making Unit (DMU). The name butterfly model for land conflict resolution was adopted for the framework based on its features and properties. The framework has therefore been recommended to be adopted for land conflict resolution in customary areas.

The Application of Typology Method in Historical Building Information Modelling (hbim) Taking the Information Surveying and Mapping of Jiayuguan Fortress Town as AN Example

Science.gov (United States)

Li, D. Y.; Li, K.; Wu, C.

2017-08-01

With the promotion of fine degree of the heritage building surveying and mapping, building information modelling technology(BIM) begins to be used in surveying and mapping, renovation, recording and research of heritage building, called historical building information modelling(HBIM). The hierarchical frameworks of parametric component library of BIM, belonging to the same type with the same parameters, has the same internal logic with archaeological typology which is more and more popular in the age identification of ancient buildings. Compared with the common materials, 2D drawings and photos, typology with HBIM has two advantages — (1) comprehensive building information both in collection and representation and (2) uniform and reasonable classification criteria This paper will take the information surveying and mapping of Jiayuguan Fortress Town as an example to introduce the field work method of information surveying and mapping based on HBIM technology and the construction of Revit family library.And then in order to prove the feasibility and advantage of HBIM technology used in typology method, this paper will identify the age of Guanghua gate tower, Rouyuan gate tower, Wenchang pavilion and the theater building of Jiayuguan Fortress Town with HBIM technology and typology method.

THE APPLICATION OF TYPOLOGY METHOD IN HISTORICAL BUILDING INFORMATION MODELLING (HBIM TAKING THE INFORMATION SURVEYING AND MAPPING OF JIAYUGUAN FORTRESS TOWN AS AN EXAMPLE

Directory of Open Access Journals (Sweden)

D. Y. Li

2017-08-01

Full Text Available With the promotion of fine degree of the heritage building surveying and mapping, building information modelling technology(BIM begins to be used in surveying and mapping, renovation, recording and research of heritage building, called historical building information modelling(HBIM. The hierarchical frameworks of parametric component library of BIM, belonging to the same type with the same parameters, has the same internal logic with archaeological typology which is more and more popular in the age identification of ancient buildings. Compared with the common materials, 2D drawings and photos, typology with HBIM has two advantages — (1 comprehensive building information both in collection and representation and (2 uniform and reasonable classification criteria This paper will take the information surveying and mapping of Jiayuguan Fortress Town as an example to introduce the field work method of information surveying and mapping based on HBIM technology and the construction of Revit family library.And then in order to prove the feasibility and advantage of HBIM technology used in typology method, this paper will identify the age of Guanghua gate tower, Rouyuan gate tower, Wenchang pavilion and the theater building of Jiayuguan Fortress Town with HBIM technology and typology method.

Gulf-Wide Information System, Environmental Sensitivity Index Brackish Marsh, Geographic NAD83, LDWF (2001) [esi_brackish_marsh_LDWF_2001

Data.gov (United States)

Louisiana Geographic Information Center — This data set contains Environmental Sensitivity Index (ESI) brackish marshes data of coastal Louisiana. The ESI is a classification and ranking system, which...

Gulf-Wide Information System, Environmental Sensitivity Index Intermediate Marsh, Geographic NAD83, LDWF (2001) [esi_intermediate_marsh_LDWF_2001

Data.gov (United States)

Louisiana Geographic Information Center — This data set contains Environmental Sensitivity Index (ESI) intermediate marshes data of coastal Louisiana. The ESI is a classification and ranking system, which...

Gulf-Wide Information System, Environmental Sensitivity Index Oyster Leases, Geographic NAD83, LDWF (2001) [esi_oyster_lease_LDWF_2001

Data.gov (United States)

Louisiana Geographic Information Center — This data set contains Environmental Sensitivity Index (ESI) oyster leases data of coastal Louisiana. The ESI is a classification and ranking system, which...

Knowledge-based geographic information systems on the Macintosh computer: a component of the GypsES project

Science.gov (United States)

Gregory Elmes; Thomas Millette; Charles B. Yuill

1991-01-01

GypsES, a decision-support and expert system for the management of Gypsy Moth addresses five related research problems in a modular, computer-based project. The modules are hazard rating, monitoring, prediction, treatment decision and treatment implementation. One common component is a geographic information system designed to function intelligently. We refer to this...

Epidemiologic Investigation of Dysentery in North of Iran: Use of Geographic Information System (GIS)

Science.gov (United States)

Nadi, Aliasghar; Abedi, Ghassem; Isazadeh, Khatoon; Rostami, Farideh; Siamian, Hasan; Hosseini, Mahbobeh; Asadi-Aliabadi, Mehran

2016-01-01

Introduction: Dysentery is an intestinal inflammation which is created by the microorganisms attacking intestine mucus. Knowing the prevalence of this disease in different societies paves the way for programming and providing treatment and preventive measures. The main purpose of this study is to investigate the epidemiologic pattern and geographical distribution of dysentery based on GIS. Method: This was a cross-sectional and analytical study. The dysentery cases were gathered from the section of contagious diseases in health chancellery of Mazandaran University of medical sciences through a checklist during the years 2008 to 2013. In order to analyze the data, we made use of chi-square test. Then, the GIS software was used to recognize the geographical distribution of the disease. Findings: There was reported about 653 cases affected by dysentery and the disease proportion was equal for both men and women. Most of the persons with dysentery was city dwellers. The highest rate of incidents was reported to be in Fereidunkenar in 2011, and the disease was mostly found among farmers, students, and college students. Conclusion: Since dysentery is a disease transmitted from water and food, and in this study, it was found out that the disease sources included using polluted water, vegetables, and lack of appropriate personal hygiene. Therefore, it is essential to take into consideration the health issues. Moreover, the suitable conditions of the geographical area which has the highest rate of incident have paved the way for dysentery occurrence. In addition, using geographic information system (GIS) as a visual instrument can help the stakeholders and officials to elaborate on the death trend and recognize the areas for optimal use of the available resources. PMID:28144197

Preliminary Findings from an Analysis of Building Energy Information System Technologies

Energy Technology Data Exchange (ETDEWEB)

Granderson, Jessica; Piette, Mary Ann; Ghatikar, Girish; Price, Philip

2009-06-01

Energy information systems comprise software, data acquisition hardware, and communication systems that are intended to provide energy information to building energy and facilities managers, financial managers, and utilities. This technology has been commercially available for over a decade, however recent advances in Internet and other information technology, and analytical features have expanded the number of product options that are available. For example, features such as green house gas tracking, configurable energy analyses and enhanced interoperability are becoming increasingly common. Energy information systems are used in a variety of commercial buildings operations and environments, and can be characterized in a number of ways. Basic elements of these systems include web-based energy monitoring, web-based energy management linked to controls, demand response, and enterprise energy management applications. However the sheer number and variety of available systems complicate the selection of products to match the needs of a given user. In response, a framework was developed to define the capabilities of different types of energy information systems, and was applied to characterize approximately 30 technologies. Measurement is a critical component in managing energy consumption and energy information must be shared at all organizational levels to maintain persistent, efficient operations. Energy information systems are important to understand because they offer the analytical support to process measured data into information, and they provide the informational link between the primary actors who impact building energy efficiency - operators, facilities and energy managers, owners and corporate decision makers. In this paper, preliminary findings are presented, with a focus on overall trends and the general state of the technology. Key conclusions include the need to further pursue standardization and usability, x-y plotting as an under-supported feature, and

BUILDING INFORMATION MODELS FOR MONITORING AND SIMULATION DATA IN HERITAGE BUILDINGS

Directory of Open Access Journals (Sweden)

D. P. Pocobelli

2018-05-01

Full Text Available This paper analyses the use of BIM in heritage buildings, assessing the state-of-the-art and finding paths for further development. Specifically, this work is part of a broader project, which final aim is to support stakeholders through BIM. Given that humidity is one of the major causes of weathering, being able to detect, depict and forecast it, is a key task. A BIM model of a heritage building – enhanced with the integration of a weathering forecasting model – will be able to give detailed information on possible degradation patterns, and when they will happen. This information can be effectively used to plan both ordinary and extraordinary maintenance. The Jewel Tower in London, our case study, is digitised using combined laser scanning and photogrammetry, and a virtual model is produced. The point cloud derived from combined laser scanning & photogrammetry is traced out in with Autodesk Revit, where the main volumetry (gross walls and floors is created with parametric objects. Surface characterisation of the façade is given through renderings. Specifically, new rendering materials have been created for this purpose, based on rectified photos of the Tower. The model is then integrated with moisture data, organised in spreadsheets and linked to it via parametric objects representing the points where measurements had been previously taken. The spatial distribution of moisture is then depicted using Dynamo. This simple exercise demonstrates the potential Dynamo has for condition reporting, and future work will concentrate on the creation of a complex forecasting model to be linked through it.

Land-use planning of Volyn region (Ukraine) using Geographic Information Systems (GIS) technologies

Science.gov (United States)

Strielko, Irina; Pereira, Paulo

2014-05-01

Land-use development planning is carried out in order to create a favourable environment for human life, sustainable socioeconomic and spatial development. Landscape planning is an important part of land-use development that aims to meet the fundamental principles of sustainable development. Geographic Information Systems (GIS) is a fundamental tool to make a better landscape planning at different territorial levels, providing data and maps to support decision making. The objective of this work is to create spatio-temporal, territorial and ecological model of development of Volyn region (Ukraine). It is based on existing spatial raster and vector data and includes the analysis of territory dynamics as the aspects responsible for it. A spatial analyst tool was used to zone the areas according to their environmental components and economic activity. This analysis is fundamental to define the basic parameters of sustainability of Volyn region. To carry out this analysis, we determined the demographic capacity of districts and the analysis of spatial parameters of land use. On the basis of the existing natural resources, we observed that there is a need of landscape protection and integration of more are natural areas in the Pan-European Ecological Network. Using GIS technologies to landscape planning in Volyn region, allowed us to identify, natural areas of interest, contribute to a better resource management and conflict resolution. Geographic Information Systems will help to formulate and implement landscape policies, reform the existing administrative system of Volyn region and contribute to a better sustainable development.

PUBLIC PERCEPTION ON DISASTER MANAGEMENT USING VOLUNTEERED GEOGRAPHIC INFORMATION (VGI: CASE OF UAE

Directory of Open Access Journals (Sweden)

M. M. Yagoub

2015-10-01

Full Text Available The number of smart phones that are supported by location facility like Global Positioning System (GPS, Camera and connected to the internet has increased sharply in UAE during the last five years. This increase offers a chance to capitalize on using these devices as resources for data collection, therefore reducing cost. In many cases specific events may happen in areas or at time where there may be no governmental departments to collect such unrepeated events. The current research will showcase various studies that had been conducted on Volunteered Geographic Information (VGI debating various aspects such as accuracy, legal issues, and privacy. This research will also integrate Geographic Information System (GIS, VGI, social media tools, data mining, and mobile technology to design a conceptual framework for promoting public participation in UAE. The data gathered through survey will be helpful in correlating various aspects of VGI. Since there are diverse views about these aspects, policy makers are left undecided in many countries about how to deal with VGI. The assessment of the UAE case will contribute to the age-long debate by examining the willingness of the public to participate. The result will show the public perception to be as sensors for data collection. Additionally, the potential of citizen involvement in the risk and disaster management process by providing voluntary data collected for VGI applications will also be explored in the paper.

American Association for the Surgery of Trauma Prevention Committee topical overview: National Trauma Data Bank, geographic information systems, and teaching injury prevention.

Science.gov (United States)

Crandall, Marie; Zarzaur, Ben; Tinkoff, Glen

2013-11-01

Injury is the leading cause of death for all Americans aged 1 to 35 years, and injury-related costs exceed $100 billion per year in the United States. Trauma centers can be important resources for risk identification and prevention strategies. The authors review 3 important resources for injury prevention education and research: the National Trauma Data Bank, geographic information systems, and an overview of injury prevention education. The National Trauma Data Bank and the Trauma Quality Improvement Program are available through the Web site of the American College of Surgeons. Links to research examples using geographic information systems software and the National Trauma Data Bank are provided in the text. Finally, resources for surgical educators in the area of injury prevention are summarized and examples provided. Database research, geographic information systems, and injury prevention education are important tools in the field of injury prevention. This article provides an overview of current research and education strategies and resources. Copyright © 2013 Elsevier Inc. All rights reserved.

Geographic information system for the study of coastal erosion in the Department of Cordoba, Colombia: design tools, and use

International Nuclear Information System (INIS)

Hoyos, Natalia; Acosta, Susana; Correa, Ivan D

2006-01-01

The study and monitoring of factors that cause shoreline erosion processes require the use of geographic information systems (GIS) to integrate and analyze data on different topics and with various formats. The scope of this project was to design and build a GIS for the study of erosion processes along the coastline of Cordoba Department, Colombia. In this article, we present some of the tools used for the SIG design and implementation, as well as a specific application for shoreline erosion analysis. The Geo database diagrammed tool (ArcGISa) was used to document the geo database structure. The process is semiautomatic and delivers a comprehensive and friendly format for the end users. Linear referencing and dynamic segmentation tools (ArcGISa) were used to characterize the coastline according to several criteria, without subdividing or duplicating it. Shoreline retreat between 1938 and 2004 was analyzed with OSAS (Digital shoreline analysis system, USGS). Maximum distance between both shorelines was recorded by a Punta Arboletes transect (972 m). Real (on the ground) maximum distance however, was larger (around 1.5 km). Nevertheless it was not recorded by any of the OSAS generated transect

Aligning building information model tools and construction management methods

NARCIS (Netherlands)

Hartmann, Timo; van Meerveld, H.J.; Vossebeld, N.; Adriaanse, Adriaan Maria

2012-01-01

Few empirical studies exist that can explain how different Building Information Model (BIM) based tool implementation strategies work in practical contexts. To help overcoming this gap, this paper describes the implementation of two BIM based tools, the first, to support the activities at an

BARRIERS AND CHALLENGES OF BUILDING INFORMATION MODELLING IMPLEMENTATION IN JORDANIAN CONSTRUCTION INDUSTRY

OpenAIRE

Mohammed A.KA. AL-Btoush*, Ahmad Tarmizi Haron

2017-01-01

Construction companies are faced with the need to innovatively integrate the construction process and address project development challenges. One way of doing that is the integration of building information modelling (BIM) in the building design and development cycles. However, due to the lack of clear understanding and the absence of a holistic implementation guideline, many companies are unable to fully achieve BIM potentials or implement BIM in their project and building lifecycle. BIM imp...

Semi-Automatic Modelling of Building FAÇADES with Shape Grammars Using Historic Building Information Modelling

Science.gov (United States)

Dore, C.; Murphy, M.

2013-02-01

This paper outlines a new approach for generating digital heritage models from laser scan or photogrammetric data using Historic Building Information Modelling (HBIM). HBIM is a plug-in for Building Information Modelling (BIM) software that uses parametric library objects and procedural modelling techniques to automate the modelling stage. The HBIM process involves a reverse engineering solution whereby parametric interactive objects representing architectural elements are mapped onto laser scan or photogrammetric survey data. A library of parametric architectural objects has been designed from historic manuscripts and architectural pattern books. These parametric objects were built using an embedded programming language within the ArchiCAD BIM software called Geometric Description Language (GDL). Procedural modelling techniques have been implemented with the same language to create a parametric building façade which automatically combines library objects based on architectural rules and proportions. Different configurations of the façade are controlled by user parameter adjustment. The automatically positioned elements of the façade can be subsequently refined using graphical editing while overlaying the model with orthographic imagery. Along with this semi-automatic method for generating façade models, manual plotting of library objects can also be used to generate a BIM model from survey data. After the 3D model has been completed conservation documents such as plans, sections, elevations and 3D views can be automatically generated for conservation projects.

Using Openstreetmap Data to Generate Building Models with Their Inner Structures for 3d Maps

Science.gov (United States)

Wang, Z.; Zipf, A.

2017-09-01

With the development of Web 2.0, more and more data related to indoor environments has been collected within the volunteered geographic information (VGI) framework, which creates a need for construction of indoor environments from VGI. In this study, we focus on generating 3D building models from OpenStreetMap (OSM) data, and provide an approach to support construction and visualization of indoor environments on 3D maps. In this paper, we present an algorithm which can extract building information from OSM data, and can construct building structures as well as inner building components (e.g., doors, rooms, and windows). A web application is built to support the processing and visualization of the building models on a 3D map. We test our approach with an indoor dataset collected from the field. The results show the feasibility of our approach and its potentials to provide support for a wide range of applications, such as indoor and outdoor navigation, urban planning, and incident management.

USING OPENSTREETMAP DATA TO GENERATE BUILDING MODELS WITH THEIR INNER STRUCTURES FOR 3D MAPS

Directory of Open Access Journals (Sweden)

Z. Wang

2017-09-01

Full Text Available With the development of Web 2.0, more and more data related to indoor environments has been collected within the volunteered geographic information (VGI framework, which creates a need for construction of indoor environments from VGI. In this study, we focus on generating 3D building models from OpenStreetMap (OSM data, and provide an approach to support construction and visualization of indoor environments on 3D maps. In this paper, we present an algorithm which can extract building information from OSM data, and can construct building structures as well as inner building components (e.g., doors, rooms, and windows. A web application is built to support the processing and visualization of the building models on a 3D map. We test our approach with an indoor dataset collected from the field. The results show the feasibility of our approach and its potentials to provide support for a wide range of applications, such as indoor and outdoor navigation, urban planning, and incident management.

[Extraction of buildings three-dimensional information from high-resolution satellite imagery based on Barista software].

Science.gov (United States)

Zhang, Pei-feng; Hu, Yuan-man; He, Hong-shi

2010-05-01

The demand for accurate and up-to-date spatial information of urban buildings is becoming more and more important for urban planning, environmental protection, and other vocations. Today's commercial high-resolution satellite imagery offers the potential to extract the three-dimensional information of urban buildings. This paper extracted the three-dimensional information of urban buildings from QuickBird imagery, and validated the precision of the extraction based on Barista software. It was shown that the extraction of three-dimensional information of the buildings from high-resolution satellite imagery based on Barista software had the advantages of low professional level demand, powerful universality, simple operation, and high precision. One pixel level of point positioning and height determination accuracy could be achieved if the digital elevation model (DEM) and sensor orientation model had higher precision and the off-Nadir View Angle was relatively perfect.

Integrationof Remote Sensing and Geographic information system in Ground Water Quality Assessment and Management

Science.gov (United States)

Shakak, N.

2015-04-01

Spatial variations in ground water quality in the Khartoum state, Sudan, have been studied using geographic information system (GIS) and remote sensing technique. Gegraphical informtion system a tool which is used for storing, analyzing and displaying spatial data is also used for investigating ground water quality information. Khartoum landsat mosac image aquired in 2013was used, Arc/Gis software applied to extract the boundary of the study area, the image was classified to create land use/land cover map. The land use map,geological and soil map are used for correlation between land use , geological formations, and soil types to understand the source of natural pollution that can lower the ground water quality. For this study, the global positioning system (GPS), used in the field to identify the borehole location in a three dimentional coordinate (Latitude, longitude, and altitude), water samples were collected from 156 borehole wells, and analyzed for physico-chemical parameters like electrical conductivity, Total dissolved solid,Chloride, Nitrate, Sodium, Magnisium, Calcium,and Flouride, using standard techniques in the laboratory and compared with the standards.The ground water quality maps of the entire study area have been prepared using spatial interpolation technique for all the above parameters.then the created maps used to visualize, analyze, and understand the relationship among the measured points. Mapping was coded for potable zones, non-potable zones in the study area, in terms of water quality sutability for drinking water and sutability for irrigation. In general satellite remote sensing in conjunction with geographical information system (GIS) offers great potential for water resource development and management.

The effects of the Health Insurance Portability and Accountability Act privacy rule on influenza research using geographical information systems

Directory of Open Access Journals (Sweden)

Norisse Tellman

2010-11-01

Full Text Available The Health Insurance Portability and Accountability Act (HIPAA privacy rule was enacted to protect patients’ personal health information from undue disclosure. Despite its intention to protect patients, recent reports suggest that HIPAA restrictions may be negatively impacting health research. Quantitative, visual geographical and statistical analysis of zip code geographical information systems (GIS mapping, comparing 3-digit HIPAA-compliant and 5-digit HIPAA-non-compliant simulated data, was chosen to identify and describe the type of distortion that may result. It was found that unmitigated HIPAA compliance with HIPAA mapping rules distorted the GIS zip code data by 28% leading to erroneous results. Thus, compliance with HIPAA privacy rule when mapping may lead investigators to publish erroneous GIS maps.

GEOGRAPHIC INFORMATION SYSTEMS AND APPLIED ECONOMICS: AN INITIAL DISCUSSION OF POTENTIAL APPLICATIONS AND CONTRIBUTIONS

OpenAIRE

Taupier, Richard; Willis, Cleve E.

1994-01-01

Geographic Information Systems (GIS) are becoming increasingly important to virtually all of the natural and social sciences. Applied economists will find that GIS can make valuable contributions to many of the problems with which they are concerned. Moreover, a great deal of the science behind GIS technology would benefit from the contributions of applied economists. This paper presents some initial suggestions for the ways in which GIS may be important to economics and the GIS related issue...

A three-dimensional natural resource damage assessment and coupled geographical information system

International Nuclear Information System (INIS)

Reed, M.; French, D.; Feng, S.S.; Knauss, W.

1991-01-01

In this paper a numerical model for natural resource damage assessments is discussed. The model addresses a wide range of spatial and temporal scales. The transport equations for both pollutant and biota are solved with a three-dimensional Lagrangian particle methodology. The model can simulate continuous releases of a contaminant, with representation of complex coastal boundaries, variable bathymetry, multiple shoreline types, and spatially variable ecosystem habitats. A graphic interface gives the user complete and facile control of the dynamic transport and biological submodels, as ell as the ability to display elements of the underlying geographical information system (GIS) data base. The model is being implemented on a 386 PC

Using Geographic Information Systems (GIS) to understand a community's primary care needs.

Science.gov (United States)

Dulin, Michael F; Ludden, Thomas M; Tapp, Hazel; Blackwell, Joshua; de Hernandez, Brisa Urquieta; Smith, Heather A; Furuseth, Owen J

2010-01-01

A key element for reducing health care costs and improving community health is increased access to primary care and preventative health services. Geographic information systems (GIS) have the potential to assess patterns of health care utilization and community-level attributes to identify geographic regions most in need of primary care access. GIS, analytical hierarchy process, and multiattribute assessment and evaluation techniques were used to examine attributes describing primary care need and identify areas that would benefit from increased access to primary care services. Attributes were identified by a collaborative partnership working within a practice-based research network using tenets of community-based participatory research. Maps were created based on socioeconomic status, population density, insurance status, and emergency department and primary care safety-net utilization. Individual and composite maps identified areas in our community with the greatest need for increased access to primary care services. Applying GIS to commonly available community- and patient-level data can rapidly identify areas most in need of increased access to primary care services. We have termed this a Multiple Attribute Primary Care Targeting Strategy. This model can be used to plan health services delivery as well as to target and evaluate interventions designed to improve health care access.

Food Delivery System with the Utilization of Vehicle Using Geographical Information System (GIS) and A Star Algorithm

Science.gov (United States)

Siregar, B.; Gunawan, D.; Andayani, U.; Sari Lubis, Elita; Fahmi, F.

2017-01-01

Food delivery system is one kind of geographical information systems (GIS) that can be applied through digitation process. The main case in food delivery system is the way to determine the shortest path and food delivery vehicle movement tracking. Therefore, to make sure that the digitation process of food delivery system can be applied efficiently, it is needed to add shortest path determination facility and food delivery vehicle tracking. This research uses A Star (A*) algorithm for determining shortest path and location-based system (LBS) programming for moving food delivery vehicle object tracking. According to this research, it is generated the integrated system that can be used by food delivery driver, customer, and administrator in terms of simplifying the food delivery system. Through the application of shortest path and the tracking of moving vehicle, thus the application of food delivery system in the scope of geographical information system (GIS) can be executed.

Pygrass: An Object Oriented Python Application Programming Interface (API for Geographic Resources Analysis Support System (GRASS Geographic Information System (GIS

Directory of Open Access Journals (Sweden)

Marco Ciolli

2013-03-01

Full Text Available PyGRASS is an object-oriented Python Application Programming Interface (API for Geographic Resources Analysis Support System (GRASS Geographic Information System (GIS, a powerful open source GIS widely used in academia, commercial settings and governmental agencies. We present the architecture of the PyGRASS library, covering interfaces to GRASS modules, vector and raster data, with a focus on the new capabilities that it provides to GRASS users and developers. Our design concept of the module interface allows the direct linking of inputs and outputs of GRASS modules to create process chains, including compatibility checks, process control and error handling. The module interface was designed to be easily extended to work with remote processing services (Web Processing Service (WPS, Web Service Definition Language (WSDL/Simple Object Access Protocol (SOAP. The new object-oriented Python programming API introduces an abstract layer that opens the possibility to use and access transparently the efficient raster and vector functions of GRASS that are implemented in C. The design goal was to provide an easy to use, but powerful, Python interface for users and developers who are not familiar with the programming language C and with the GRASS C-API. We demonstrate the capabilities, scalability and performance of PyGRASS with several dedicated tests and benchmarks. We compare and discuss the results of the benchmarks with dedicated C implementations.

Accurate facade feature extraction method for buildings from three-dimensional point cloud data considering structural information

Science.gov (United States)

Wang, Yongzhi; Ma, Yuqing; Zhu, A.-xing; Zhao, Hui; Liao, Lixia

2018-05-01

Facade features represent segmentations of building surfaces and can serve as a building framework. Extracting facade features from three-dimensional (3D) point cloud data (3D PCD) is an efficient method for 3D building modeling. By combining the advantages of 3D PCD and two-dimensional optical images, this study describes the creation of a highly accurate building facade feature extraction method from 3D PCD with a focus on structural information. The new extraction method involves three major steps: image feature extraction, exploration of the mapping method between the image features and 3D PCD, and optimization of the initial 3D PCD facade features considering structural information. Results show that the new method can extract the 3D PCD facade features of buildings more accurately and continuously. The new method is validated using a case study. In addition, the effectiveness of the new method is demonstrated by comparing it with the range image-extraction method and the optical image-extraction method in the absence of structural information. The 3D PCD facade features extracted by the new method can be applied in many fields, such as 3D building modeling and building information modeling.

Mobile geonet: Anywhere, global and secure access to your geographic oriented information

International Nuclear Information System (INIS)

Denizot, Laurent

2001-01-01

Today, the mobile technology has set up devices and communication architectures which change the way to work and improve efficiency and interactivity. EADS Matra Systems and Information is involved into these changes and develops a generic technology, mobile geonet, which brings these new means to improve the link between people who works together. Mobile geonet is a framework to develop mobile applications with a high security level and geographic capabilities. It is based on fully networked technologies (intranet/extranet/internet). It uses common mobile devices, enhanced by localisation and communication add-ons, like GPS, GSM or satellite phones modules. All the information processed and produced by upstream activities is stored in the DB GEO database system. These can be reports, maps, satellite images, structured information, points of interest and anything else with an potential geographic component. The role of the ASP (Application Service Provider) is to integrate existing applications or provide new ones. These applications are activated whether server-side, to mine, prepare and encode data or client-side to decode, present or interact in particular means with the user. The applications and data are disseminated through an extranet server. A particular interest of distributing the client applications by the ASP is the deployment cost on all mobile and fixed terminals, which is very small, because it is automatically downloaded for each upgrade. The communication layer aims at delivering applications up to the mobile device and permits the data exchange between the mobile device and the central data repository. Different means can be used: GSM network, internet or satellite communications. The applications are adapted to the available bandwidth, especially when image parts are downloaded. The mobile device is chosen on the shelf, depending of the requirements of the application. The computer can be a very small Pocket PC or a typical portable PC. For