WorldWideScience

Sample records for building generic anatomical

  1. Building generic anatomical models using virtual model cutting and iterative registration

    Directory of Open Access Journals (Sweden)

    Hallgrímsson Benedikt

    2010-02-01

    retrieve a sub-region from it at their ease. Java-based implementation allows our method to be used on various visualization systems including personal computers, workstations, computers equipped with stereo displays, and even virtual reality rooms such as the CAVE Automated Virtual Environment. The technique allows biologists to build generic 3D models of their interest quickly and accurately.

  2. Origami building blocks: Generic and special four-vertices

    Science.gov (United States)

    Waitukaitis, Scott; van Hecke, Martin

    2016-02-01

    Four rigid panels connected by hinges that meet at a point form a four-vertex, the fundamental building block of origami metamaterials. Most materials designed so far are based on the same four-vertex geometry, and little is known regarding how different geometries affect folding behavior. Here we systematically categorize and analyze the geometries and resulting folding motions of Euclidean four-vertices. Comparing the relative sizes of sector angles, we identify three types of generic vertices and two accompanying subtypes. We determine which folds can fully close and the possible mountain-valley assignments. Next, we consider what occurs when sector angles or sums thereof are set equal, which results in 16 special vertex types. One of these, flat-foldable vertices, has been studied extensively, but we show that a wide variety of qualitatively different folding motions exist for the other 15 special and 3 generic types. Our work establishes a straightforward set of rules for understanding the folding motion of both generic and special four-vertices and serves as a roadmap for designing origami metamaterials.

  3. A generic component model for building systems software

    OpenAIRE

    Coulson, Geoffrey; Blair, Gordon; Grace, Paul; Taiani, Francois; Joolia, Ackbar; Lee, Kevin; Ueyama, Jo; Sivaharan, Thirunavukkarasu

    2008-01-01

    Component-based software structuring principles are now commonplace at the application level; but componentization is far less established when it comes to building low-level systems software. Although there have been pioneering efforts in applying componentization to systems-building, these efforts have tended to target specific application domains (e.g., embedded systems, operating systems, communications systems, programmable networking environments, or middleware platforms). They also ten...

  4. Automatic Segmentation Framework of Building Anatomical Mouse Model for Bioluminescence Tomography

    OpenAIRE

    Abdullah Alali

    2013-01-01

    Bioluminescence tomography is known as a highly ill-posed inverse problem. To improve the reconstruction performance by introducing anatomical structures as a priori knowledge, an automatic segmentation framework has been proposed in this paper to extract the mouse whole-body organs and tissues, which enables to build up a heterogeneous mouse model for reconstruction of bioluminescence tomography. Finally, an in vivo mouse experiment has been conducted to evaluate this framework by using an X...

  5. Categorizing threat : building and using a generic threat matrix.

    Energy Technology Data Exchange (ETDEWEB)

    Woodard, Laura; Veitch, Cynthia K.; Thomas, Sherry Reede; Duggan, David Patrick

    2007-09-01

    The key piece of knowledge necessary for building defenses capable of withstanding or surviving cyber and kinetic attacks is an understanding of the capabilities posed by threats to a government, function, or system. With the number of threats continuing to increase, it is no longer feasible to enumerate the capabilities of all known threats and then build defenses based on those threats that are considered, at the time, to be the most relevant. Exacerbating the problem for critical infrastructure entities is the fact that the majority of detailed threat information for higher-level threats is held in classified status and is not available for general use, such as the design of defenses and the development of mitigation strategies. To reduce the complexity of analyzing threat, the threat space must first be reduced. This is achieved by taking the continuous nature of the threat space and creating an abstraction that allows the entire space to be grouped, based on measurable attributes, into a small number of distinctly different levels. The work documented in this report is an effort to create such an abstraction.

  6. Integration of distributed generation systems into generic types of commercial buildings in California

    Energy Technology Data Exchange (ETDEWEB)

    Medrano, M. [Departament d' Informatica i Eng. Industrial, Universitat de Lleida, Jaume II 69, 25001 Lleida (Spain); Brouwer, J.; McDonell, V.; Mauzey, J.; Samuelsen, S. [Advanced Power and Energy Program, University of California, Irvine, U.S., CA 92697-3550 (United States)

    2008-07-01

    Distributed generation (DG) of combined cooling, heat, and power (CCHP) has been gaining momentum in recent years as an efficient, secure alternative for meeting increasing power demands in the world. One of the most critical and emerging markets for DG-CCHP systems is commercial and institutional buildings. The present study focuses analysis on the main economic, energy-efficiency, and environmental impacts of the integration of three types of advanced DG technologies (high-temperature fuel cells, micro-turbines, and photovoltaic solar panels) into four types of representative generic commercial building templates (small office building, medium office building, hospital, and college/school) in southern California (e.g., mild climate), using eQUEST as energy simulation tool. Detailed load profiles for the four commercial building types during times of peak electric and peak gas consumption were analyzed and complementary strategies to further increase overall building energy efficiencies such as energy efficiency measures (e.g., day lighting, exterior shading, improved HVAC performance) and thermally activated absorption cooling were also investigated. Results show that the high-temperature fuel cell (HTFC) performance is best matched with the hospital energy loads, resulting in a 98% DG capacity factor, 85% DG heat recovery factor, and $860,000 in energy savings (6 years payback). The introduction of thermally driven double-effect absorption cooling (AC) in the college building with HTFC reduces significantly the building electricity-to-thermal load ratio and boosts the heat recovery factor from 37% to 97%. (author)

  7. Enhancement of Generic Building Models by Recognition and Enforcement of Geometric Constraints

    Science.gov (United States)

    Meidow, J.; Hammer, H.; Pohl, M.; Bulatov, D.

    2016-06-01

    Many buildings in 3D city models can be represented by generic models, e.g. boundary representations or polyhedrons, without expressing building-specific knowledge explicitly. Without additional constraints, the bounding faces of these building reconstructions do not feature expected structures such as orthogonality or parallelism. The recognition and enforcement of man-made structures within model instances is one way to enhance 3D city models. Since the reconstructions are derived from uncertain and imprecise data, crisp relations such as orthogonality or parallelism are rarely satisfied exactly. Furthermore, the uncertainty of geometric entities is usually not specified in 3D city models. Therefore, we propose a point sampling which simulates the initial point cloud acquisition by airborne laser scanning and provides estimates for the uncertainties. We present a complete workflow for recognition and enforcement of man-made structures in a given boundary representation. The recognition is performed by hypothesis testing and the enforcement of the detected constraints by a global adjustment of all bounding faces. Since the adjustment changes not only the geometry but also the topology of faces, we obtain improved building models which feature regular structures and a potentially reduced complexity. The feasibility and the usability of the approach are demonstrated with a real data set.

  8. Analysis and Development of the Generic Maintenance Management Process Modeling for the Preservation of Heritage School Buildings

    OpenAIRE

    A Z. A. Akasah; B. M. Alias

    2009-01-01

    Preservation of heritage school buildings requires special maintenance management practices. A thorough understanding of the maintenance management process is essential in ensuring effective maintenance practices can be instituted. The aim of this paper was to develop a generic process model that will promote the understanding of an effective management of maintenance process for heritage school buildings. A process model for the Maintenance Management of Heritage School Buildings (MMHSB) was...

  9. Building a functional neurocognitive theory of the multiple intelligences anatomical framework

    Directory of Open Access Journals (Sweden)

    CarloCerruti

    2013-12-01

    Full Text Available A key goal of educational neuroscience is to conduct constrained experimental research that is theory-driven and yet also clearly related to educators’ complex set of questions and concerns. However, the fields of education, cognitive psychology and neuroscience use different levels of description to characterize human ability. An important advance in research in educational neuroscience would be the identification of a cognitive and neurocognitive framework at a level of description relatively intuitive to educators. I argue that the theory of multiple intelligences (Gardner, 1983, a conception of the mind that motivated a past generation of teachers, may provide such an opportunity. I criticize MI for doing little to clarify for teachers a core misunderstanding, specifically that MI was only an anatomical map of the mind but not a functional theory that detailed how the mind actually processes information. In an attempt to build a “functional MI” theory, I integrate into MI basic principles of cognitive and neural functioning, namely interregional neural facilitation and inhibition. In so doing I hope to forge a path towards constrained experimental research that bears upon teachers’ concerns about teaching and learning.

  10. Building Spatiotemporal Anatomical Models using Joint 4-D Segmentation, Registration, and Subject-Specific Atlas Estimation

    OpenAIRE

    Prastawa, Marcel; Awate, Suyash P.; Gerig, Guido

    2012-01-01

    Longitudinal analysis of anatomical changes is a vital component in many personalized-medicine applications for predicting disease onset, determining growth/atrophy patterns, evaluating disease progression, and monitoring recovery. Estimating anatomical changes in longitudinal studies, especially through magnetic resonance (MR) images, is challenging because of temporal variability in shape (e.g. from growth/atrophy) and appearance (e.g. due to imaging parameters and tissue properties affecti...

  11. On the performance of base-isolated buildings: a generic model

    OpenAIRE

    Talbot, James P.

    2002-01-01

    Ground-borne vibration has existed ever since the development of urban road and rail networks. Vibration generated by the moving traffic propagates through the ground and into buildings, resulting in unacceptable levels of internal noise and vibration. A common solution to this increasingly significant problem is the base-isolation of buildings by incorporating vibration isolation bearings between the buildings and their foundations. This technique has been employed for over forty years bu...

  12. Analysis and Development of the Generic Maintenance Management Process Modeling for the Preservation of Heritage School Buildings

    Directory of Open Access Journals (Sweden)

    A Z. A. Akasah

    2009-12-01

    Full Text Available Preservation of heritage school buildings requires special maintenance management practices. A thorough understanding of the maintenance management process is essential in ensuring effective maintenance practices can be instituted. The aim of this paper was to develop a generic process model that will promote the understanding of an effective management of maintenance process for heritage school buildings. A process model for the Maintenance Management of Heritage School Buildings (MMHSB was developed using the Integration Definition for Function Modeling (IDEF0 system through an iterative process. The initial MMHSB process model was submitted to a team of management experts from the Malaysian Ministry of Arts and Heritage and the Ministry of Education Malaysia for verifications. Based on their feedbacks the initial model was refined and a proposed model was developed. From the second verification, the feed back received formed the basis for the final model. The final model elucidates the items for the input, mechanism, control and output elements that are critical in the maintenance management of heritage school buildings. The model also redefines the existing scope of responsibilities of the Headmasters’ and Senior Assistants’ in the management of maintenance. The perceived effectiveness of the model by potential users was surveyed using a selected number of administrators from potentially recognized heritage schools. The results indicated that the process model is perceived as being helpful in clarifying the maintenance management process of heritage school buildings and is useful in changing the current reactive management practices to that of a more proactive practice. In conclusion, it is believed that the MMHSB Process Model is helpful in promoting the understanding of the maintenance management process which would lead to improve preservation practices of heritage school buildings.

  13. Generic bottom-up building-energy models for developing regional energy transition scenarios

    OpenAIRE

    Knoeri, Christof; Goetz, Alessandra; Binder, Claudia R.

    2014-01-01

    Energy demand from buildings has the largest single share of the global final energy demand, but offers massive energy saving potentials through state-of-the-art technologies and behavioural changes. However, the required speed of technology adoption and behavioural changes to achieve such savings are largely uncertain and embedded in complex socio-technical system. Successful examples of achieving such systemic transition in the energy system are mostly found on the regional scale. Therefore...

  14. The Required Level of Design of Waste Plants for New Build Reactors in the Generic Design Assessment

    International Nuclear Information System (INIS)

    The generic design assessment (GDA) process allows a rigorous and structured assessment of detailed Safety, Security and Environmental aspects of the design of new build reactors. For GDA the design of the fuel pond within the reactor building and the ILW processing facilities needs to be in sufficient detail to allow a fully detailed assessment. This paper clarifies the minimum position for GDA so that the output is meaningful and without exclusions. A separate paper will be developed for phase 2. For the other storage facilities, we need confidence through the GDA process that the spent fuel and waste can be retrieved, transported, and disposed of at the end of storage. Therefore the emphasis is less on the specific design details and more on the evidence to show that the chosen route is suitable. For the waste facilities, we need the Requesting Parties to demonstrate that they can safely handle, store and dispose of the wastes they generate. This will require sufficient levels of design to justify credibility of the storage options proposed; understanding how waste streams and their packaging evolve over the storage period; data and records management; knowledge of the constraints placed on the wastes by the disposal facilities; identification of knowledge gaps and the resulting R&D programme; and robust estimates of the required capacity. This paper proposes that for these other storage facilities the details discussed above are incorporated into a strategy that includes key milestones. This detailed strategy would satisfy the needs of GDA. The detailed review of the storage requirements will underpin the plans. This will include: i) the types of facility that could be used; ii) when facilities will be developed and constructed; and iii) the research needs that are required to ensure the waste and spent fuel can be safely managed on sites, transported and disposed of. These planning requirements are similar to those that both the Regulators and the Nuclear

  15. Generic Network Location Service

    OpenAIRE

    Laban Mwansa; Jan Janeček

    2010-01-01

    This work presents the Generic Network Location Service based on the Chord implementation utilizing data structures called distributed hash tables (DHT) or structured overlay networks, which are used to build scalable self-managing distributed systems. The provided algorithms guarantee resilience in the presence of dynamism: they guarantee consistent lookup results in the presence of nodes failing and leaving. Generic Network Location Service provides a Location Service system based on DHT te...

  16. CoCoTools: open-source software for building connectomes using the CoCoMac anatomical database.

    Science.gov (United States)

    Blumenfeld, Robert S; Bliss, Daniel P; Perez, Fernando; D'Esposito, Mark

    2014-04-01

    Neuroanatomical tracer studies in the nonhuman primate macaque monkey are a valuable resource for cognitive neuroscience research. These data ground theories of cognitive function in anatomy, and with the emergence of graph theoretical analyses in neuroscience, there is high demand for these data to be consolidated into large-scale connection matrices ("macroconnectomes"). Because manual review of the anatomical literature is time consuming and error prone, computational solutions are needed to accomplish this task. Here we describe the "CoCoTools" open-source Python library, which automates collection and integration of macaque connectivity data for visualization and graph theory analysis. CoCoTools both interfaces with the CoCoMac database, which houses a vast amount of annotated tracer results from 100 years (1905-2005) of neuroanatomical research, and implements coordinate-free registration algorithms, which allow studies that use different parcellations of the brain to be translated into a single graph. We show that using CoCoTools to translate all of the data stored in CoCoMac produces graphs with properties consistent with what is known about global brain organization. Moreover, in addition to describing CoCoTools' processing pipeline, we provide worked examples, tutorials, links to on-line documentation, and detailed appendices to aid scientists interested in using CoCoTools to gather and analyze CoCoMac data. PMID:24116839

  17. NET 40 Generics Beginner's Guide

    CERN Document Server

    Mukherjee, Sudipta

    2012-01-01

    This is a concise, practical guide that will help you learn Generics in .NET, with lots of real world and fun-to-build examples and clear explanations. It is packed with screenshots to aid your understanding of the process. This book is aimed at beginners in Generics. It assumes some working knowledge of C# , but it isn't mandatory. The following would get the most use out of the book: Newbie C# developers struggling with Generics. Experienced C++ and Java Programmers who are migrating to C# and looking for an alternative to other generic frameworks like STL and JCF would find this book handy.

  18. Generic variation?

    DEFF Research Database (Denmark)

    Jensen, Torben Juel

    2009-01-01

    Abstract In modern Danish, a handful of pronouns may be used to refer to a generic referent. In recent decades, the second person singular pronoun du has gained ground, apparently in parallel to similar recent developments in other languages. Even though generic du may not be as old as the...... traditional generic pronoun man, it is not a new variant in Danish if we by “new” mean that it has come into existence within the last 30-40 years. To all appearances, it has been used before the influence from English became significant in the last part of the 20th century, and the generic du as such need...... therefore not be explained by contact with English, as often assumed. In order to study the spread of the generic use of du we analysed the use of pronouns with generic reference in a large sample of speakers, most of whom were recorded during sociolinguistic interviews twice – the first time in the period...

  19. Generic robot architecture

    Science.gov (United States)

    Bruemmer, David J [Idaho Falls, ID; Few, Douglas A [Idaho Falls, ID

    2010-09-21

    The present invention provides methods, computer readable media, and apparatuses for a generic robot architecture providing a framework that is easily portable to a variety of robot platforms and is configured to provide hardware abstractions, abstractions for generic robot attributes, environment abstractions, and robot behaviors. The generic robot architecture includes a hardware abstraction level and a robot abstraction level. The hardware abstraction level is configured for developing hardware abstractions that define, monitor, and control hardware modules available on a robot platform. The robot abstraction level is configured for defining robot attributes and provides a software framework for building robot behaviors from the robot attributes. Each of the robot attributes includes hardware information from at least one hardware abstraction. In addition, each robot attribute is configured to substantially isolate the robot behaviors from the at least one hardware abstraction.

  20. Need for generic, innovative and geometric deliveries in developing self-sustaining capacity building in remote sensing

    Science.gov (United States)

    Gupta, R. K.; Balamanikavelu, P. M.; Vijayan, D.; Prasad, T. S.

    Everybody uses a bulb to illustrate an idea but nobody shows where the current comes from. Majority of remote sensing user community comes from natural and social sciences domain while remote sensing technology evolves from physical and engineering sciences. To ensure inculcation and internalization of remote sensing technology by application/resource scientists, trainer needs to transfer physical and engineering concepts in geometric manner. Here, the steering for the transfer of knowledge (facts, procedures, concepts and principles) and skills (thinking, acting, reacting and interacting) needs to take the trainees from Known to Unknown, Concrete to Abstract, Observation to Theory and Simple to Complex. In the initial stage of training/education, experiential learning by instructor led exploring of thematic details in false colour composite (FCC) as well as in individual black and white spectral band(s) imagery by trainees not only creates interest, confidence build-up and orientation towards purposeful learning but also helps them to overcome their inhibitions towards the physical and engineering basal. The methodology to be adopted has to inculcate productive learning, emphasizing more on thinking and trial and error aspects as opposed to reproductive learning based dominantly on being told and imitation. The delivery by trainer needs to ensure dynamic, stimulating and effective discussions through deluging questions pertaining to analysis, synthesis and evaluation nature. This would ensure proactive participation from trainees. Hands-on module leads to creative concretization of concepts. To keep the trainees inspired to learn in an auto mode during post-training period, they need to consciously swim in the current and emerging knowledge pool during training programme. This is achieved through assignment of seminar delivery task to the trainees. During the delivery of seminar, peers and co-trainees drive the trainee to communicate the seminar content not only

  1. Family Genericity

    DEFF Research Database (Denmark)

    Ernst, Erik

    2006-01-01

    Type abstraction in object-oriented languages embody two techniques, each with its own strenghts and weaknesses. The first technique is extension, yielding abstraction mechanisms with good support for gradual specification. The prime example is inheritance. The second technique is functional abst...... designate the result as family genericity. The presented language design has been implemented....

  2. A review of the Generic Design Assessment (GDA) Public Dialogue Pilot (2015) for new nuclear build in the UK: lessons for engagement theory and practice.

    Science.gov (United States)

    Whitton, John; Parry, Ioan; Grundy, Colette; Lillycrop, Annabelle; Ross, David

    2016-06-01

    We have discussed previously that a community-based, asset-based approach is required to achieve any sense of how social sustainability can be defined in a community setting within the context of energy developments. Our approach aims to initiate a lasting change within 'energy' communities through building social capital; focusing on community assets not deficits to define their social priorities. Through deliberation, we develop an understanding of social sustainability so that a community is well placed to enter discussions with government and industry regarding large energy developments that will directly affect them. We review the 2015 Generic Design Assessment (GDA) Public Dialogue Pilot process for potential new nuclear reactors in the UK. We examine the aims of the dialogue, giving particular attention to a comparison between the national sampling of citizens for the GDA and the local community-based, deliberative approach we have proposed previously. We find an ongoing tension between 'national' engagement processes (such as the GDA Public Dialogue Pilot process) and the specific requirements of those energy communities that live adjacent or close to energy infrastructure, manifested here by a conflict between the requirements of the convenor and those of participants regarding priority issues for discussion. We also reveal a paradox; despite participant preference for a remote, internet-based engagement process, they agreed that face to face contact is a priority to encourage trust building between participants and the convenor of the process-a desired outcome of the process. The GDA Public Dialogue Pilot process has demonstrated that stakeholders are willing to engage with and be more directly involved in local energy-related decisions that affect them directly, provided there is opportunity to discuss locally-relevant and site-specific issues in addition to those of a broader nature. There exists a disparity and conflict between 'national' engagement

  3. Anatomic Total Shoulder System

    Medline Plus

    Full Text Available GLOBAL AP ANATOMIC TOTAL SHOULDER SYSTEM METHODIST HOSPITAL PHILADELPHIA, PA April 17, 2008 00:00:10 ANNOUNCER: ... you'll be able to watch a live global AP anatomic total shoulder surgery from Methodist Hospital ...

  4. Building

    OpenAIRE

    Seavy, Ryan

    2014-01-01

    Building for concrete is temporary. The building of wood and steel stands against the concrete to give form and then gives way, leaving a trace of its existence behind. Concrete is not a building material. One does not build with concrete. One builds for concrete.

  5. Generic Software Architecture for Launchers

    Science.gov (United States)

    Carre, Emilien; Gast, Philippe; Hiron, Emmanuel; Leblanc, Alain; Lesens, David; Mescam, Emmanuelle; Moro, Pierre

    2015-09-01

    The definition and reuse of generic software architecture for launchers is not so usual for several reasons: the number of European launcher families is very small (Ariane 5 and Vega for these last decades); the real time constraints (reactivity and determinism needs) are very hard; low levels of versatility are required (implying often an ad hoc development of the launcher mission). In comparison, satellites are often built on a generic platform made up of reusable hardware building blocks (processors, star-trackers, gyroscopes, etc.) and reusable software building blocks (middleware, TM/TC, On Board Control Procedure, etc.). If some of these reasons are still valid (e.g. the limited number of development), the increase of the available CPU power makes today an approach based on a generic time triggered middleware (ensuring the full determinism of the system) and a centralised mission and vehicle management (offering more flexibility in the design and facilitating the long term maintenance) achievable. This paper presents an example of generic software architecture which could be envisaged for future launchers, based on the previously described principles and supported by model driven engineering and automatic code generation.

  6. Anatomic Total Shoulder System

    Medline Plus

    Full Text Available GLOBAL AP ANATOMIC TOTAL SHOULDER SYSTEM METHODIST HOSPITAL PHILADELPHIA, PA April 17, 2008 00:00:10 ANNOUNCER: DePuy Orthopedics is continually advancing the standard of orthopedic patient care. In a few ...

  7. Anatomic Total Shoulder System

    Medline Plus

    Full Text Available ... Orthopedics is continually advancing the standard of orthopedic patient care. In a few moments, you'll be ... and version variability which allows adaptability to a patient's unique anatomical makeup. Dr. Gerald R. Williams, Jr., ...

  8. Anatomic Total Shoulder System

    Medline Plus

    Full Text Available ... to a patient's unique anatomical makeup. Dr. Gerald R. Williams, Jr., a shoulder specialist from the Rothman ... That might help. Could you raise the O.R. table, please? 00:28:35 WOMAN: Can you ...

  9. Anatomic Total Shoulder System

    Medline Plus

    Full Text Available GLOBAL AP ANATOMIC TOTAL SHOULDER SYSTEM METHODIST HOSPITAL PHILADELPHIA, PA April 17, 2008 00:00:10 ANNOUNCER: DePuy Orthopedics is continually advancing the standard of orthopedic patient ...

  10. Sensitivity of predicted muscle forces during gait to anatomical variability in musculotendon geometry.

    Science.gov (United States)

    Bosmans, Lode; Valente, Giordano; Wesseling, Mariska; Van Campen, Anke; De Groote, Friedl; De Schutter, Joris; Jonkers, Ilse

    2015-07-16

    Scaled generic musculoskeletal models are commonly used to drive dynamic simulations of motions. It is however, acknowledged that not accounting for variability in musculoskeletal geometry and musculotendon parameters may confound the simulation results, even when analysing control subjects. This study documents the three-dimensional anatomical variability of musculotendon origins and insertions of 33 lower limb muscles determined based on magnetic resonance imaging in six subjects. This anatomical variability was compared to the musculotendon point location in a generic musculoskeletal model. Furthermore, the sensitivity of muscle forces during gait, calculated using static optimization, to perturbations of the musculotendon point location was analyzed with a generic model. More specific, a probabilistic approach was used: for each analyzed musculotendon point, the three-dimensional location was re-sampled with a uniform Latin hypercube method within the anatomical variability and the static optimization problem was then re-solved for all perturbations. We found that musculotendon point locations in the generic model showed only variable correspondences with the anatomical variability. The anatomical variability of musculotendon point location did affect the calculated muscle forces: muscles most sensitive to perturbations within the anatomical variability are iliacus and psoas. Perturbation of the gluteus medius anterior, iliacus and psoas induces the largest concomitant changes in muscle forces of the unperturbed muscles. Therefore, when creating subject-specific musculoskeletal models, these attachment points should be defined accurately. In addition, the size of the anatomical variability of the musculotendon point location was not related to the sensitivity of the calculated muscle forces. PMID:25979383

  11. Anatomic Total Shoulder System

    Medline Plus

    Full Text Available ... AP ANATOMIC TOTAL SHOULDER SYSTEM METHODIST HOSPITAL PHILADELPHIA, PA April 17, 2008 00:00:10 ANNOUNCER: DePuy ... you don't make a bunch of small passes at the lesser tuberosity and make it a ...

  12. Anatomic Total Shoulder System

    Medline Plus

    Full Text Available ... Anatomic Total Shoulder surgery, which featured the latest innovation in shoulder surgery from DePuy Orthopedics. OR-Live makes it easy for you to learn more. Just click on the "Request Information" button on your webcast screen and open the door to informed medical care. 01:21: ...

  13. Anatomic Total Shoulder System

    Medline Plus

    Full Text Available ... advancing the standard of orthopedic patient care. In a few moments, you'll be able to watch a live global AP anatomic total shoulder surgery from Methodist Hospital in Philadelphia. A revolution in shoulder orthopedics, the Global AP gives ...

  14. Anatomic Total Shoulder System

    Medline Plus

    Full Text Available ... by almost ten years, is shoulders. So by definition, the average shoulder-replacement patient is almost ten ... Anatomic Total Shoulder surgery, which featured the latest innovation in shoulder surgery from DePuy Orthopedics. OR-Live ...

  15. Early fetal anatomical sonography.

    LENUS (Irish Health Repository)

    Donnelly, Jennifer C

    2012-10-01

    Over the past decade, prenatal screening and diagnosis has moved from the second into the first trimester, with aneuploidy screening becoming both feasible and effective. With vast improvements in ultrasound technology, sonologists can now image the fetus in greater detail at all gestational ages. In the hands of experienced sonographers, anatomic surveys between 11 and 14 weeks can be carried out with good visualisation rates of many structures. It is important to be familiar with the normal development of the embryo and fetus, and to be aware of the major anatomical landmarks whose absence or presence may be deemed normal or abnormal depending on the gestational age. Some structural abnormalities will nearly always be detected, some will never be and some are potentially detectable depending on a number of factors.

  16. What makes a generic medication generic?

    Science.gov (United States)

    Howland, Robert H

    2009-12-01

    By law, the U.S. Food and Drug Administration (FDA) can approve generic versions of brand-name drugs without requiring that research be conducted to prove them safe and effective. However, compared with a brand-name drug, a generic drug must demonstrate that it (a) contains the same active ingredients; (b) is identical in strength, dosage form, and route of administration; (c) is bioequivalent; (d) has the same clinical use indications; (e) meets the same batch requirements for identity, strength, purity, and quality; and (f) is manufactured according to the same FDA regulations. The most important aspect of generic drug development are the concepts of bioavailability and bioequivalence. According to the concept of bioequivalence, if a drug product contains an active ingredient that is chemically identical and is delivered to the site of action at the same rate and extent as another drug product, then it is considered to be clinically equivalent and can be substituted for that drug product. PMID:20000278

  17. Quantifying anatomical shape variations in neurological disorders.

    Science.gov (United States)

    Singh, Nikhil; Fletcher, P Thomas; Preston, J Samuel; King, Richard D; Marron, J S; Weiner, Michael W; Joshi, Sarang

    2014-04-01

    We develop a multivariate analysis of brain anatomy to identify the relevant shape deformation patterns and quantify the shape changes that explain corresponding variations in clinical neuropsychological measures. We use kernel Partial Least Squares (PLS) and formulate a regression model in the tangent space of the manifold of diffeomorphisms characterized by deformation momenta. The scalar deformation momenta completely encode the diffeomorphic changes in anatomical shape. In this model, the clinical measures are the response variables, while the anatomical variability is treated as the independent variable. To better understand the "shape-clinical response" relationship, we also control for demographic confounders, such as age, gender, and years of education in our regression model. We evaluate the proposed methodology on the Alzheimer's Disease Neuroimaging Initiative (ADNI) database using baseline structural MR imaging data and neuropsychological evaluation test scores. We demonstrate the ability of our model to quantify the anatomical deformations in units of clinical response. Our results also demonstrate that the proposed method is generic and generates reliable shape deformations both in terms of the extracted patterns and the amount of shape changes. We found that while the hippocampus and amygdala emerge as mainly responsible for changes in test scores for global measures of dementia and memory function, they are not a determinant factor for executive function. Another critical finding was the appearance of thalamus and putamen as most important regions that relate to executive function. These resulting anatomical regions were consistent with very high confidence irrespective of the size of the population used in the study. This data-driven global analysis of brain anatomy was able to reach similar conclusions as other studies in Alzheimer's disease based on predefined ROIs, together with the identification of other new patterns of deformation. The

  18. Reference Man anatomical model

    Energy Technology Data Exchange (ETDEWEB)

    Cristy, M.

    1994-10-01

    The 70-kg Standard Man or Reference Man has been used in physiological models since at least the 1920s to represent adult males. It came into use in radiation protection in the late 1940s and was developed extensively during the 1950s and used by the International Commission on Radiological Protection (ICRP) in its Publication 2 in 1959. The current Reference Man for Purposes of Radiation Protection is a monumental book published in 1975 by the ICRP as ICRP Publication 23. It has a wealth of information useful for radiation dosimetry, including anatomical and physiological data, gross and elemental composition of the body and organs and tissues of the body. The anatomical data includes specified reference values for an adult male and an adult female. Other reference values are primarily for the adult male. The anatomical data include much data on fetuses and children, although reference values are not established. There is an ICRP task group currently working on revising selected parts of the Reference Man document.

  19. Generic Reed Solomon Encorder

    OpenAIRE

    Petrus Mursanto

    2006-01-01

    Reed Solomon (RS) codes is a mechanism to detect and correct burst of errors in data transmission and storage systems. It provides a solid introduction to foundation mathematical concept of Galois Field algebra and its application. With the development of digital hardware technology, the RS concepts were brought into reality, i.e. the implementation of RS codec chips. This paper presents the development steps of a generic RS encoder using VHDL. The encoder is able to handle generic width of d...

  20. Anatomical imaging for radiotherapy

    Energy Technology Data Exchange (ETDEWEB)

    Evans, Philip M [Joint Physics Department, Institute of Cancer Research and Royal Marsden NHS Foundation Trust, Downs Road, Sutton, Surrey SM2 5PT (United Kingdom)], E-mail: phil.evans@icr.ac.uk

    2008-06-21

    The goal of radiation therapy is to achieve maximal therapeutic benefit expressed in terms of a high probability of local control of disease with minimal side effects. Physically this often equates to the delivery of a high dose of radiation to the tumour or target region whilst maintaining an acceptably low dose to other tissues, particularly those adjacent to the target. Techniques such as intensity modulated radiotherapy (IMRT), stereotactic radiosurgery and computer planned brachytherapy provide the means to calculate the radiation dose delivery to achieve the desired dose distribution. Imaging is an essential tool in all state of the art planning and delivery techniques: (i) to enable planning of the desired treatment, (ii) to verify the treatment is delivered as planned and (iii) to follow-up treatment outcome to monitor that the treatment has had the desired effect. Clinical imaging techniques can be loosely classified into anatomic methods which measure the basic physical characteristics of tissue such as their density and biological imaging techniques which measure functional characteristics such as metabolism. In this review we consider anatomical imaging techniques. Biological imaging is considered in another article. Anatomical imaging is generally used for goals (i) and (ii) above. Computed tomography (CT) has been the mainstay of anatomical treatment planning for many years, enabling some delineation of soft tissue as well as radiation attenuation estimation for dose prediction. Magnetic resonance imaging is fast becoming widespread alongside CT, enabling superior soft-tissue visualization. Traditionally scanning for treatment planning has relied on the use of a single snapshot scan. Recent years have seen the development of techniques such as 4D CT and adaptive radiotherapy (ART). In 4D CT raw data are encoded with phase information and reconstructed to yield a set of scans detailing motion through the breathing, or cardiac, cycle. In ART a set of

  1. Anatomical imaging for radiotherapy

    International Nuclear Information System (INIS)

    The goal of radiation therapy is to achieve maximal therapeutic benefit expressed in terms of a high probability of local control of disease with minimal side effects. Physically this often equates to the delivery of a high dose of radiation to the tumour or target region whilst maintaining an acceptably low dose to other tissues, particularly those adjacent to the target. Techniques such as intensity modulated radiotherapy (IMRT), stereotactic radiosurgery and computer planned brachytherapy provide the means to calculate the radiation dose delivery to achieve the desired dose distribution. Imaging is an essential tool in all state of the art planning and delivery techniques: (i) to enable planning of the desired treatment, (ii) to verify the treatment is delivered as planned and (iii) to follow-up treatment outcome to monitor that the treatment has had the desired effect. Clinical imaging techniques can be loosely classified into anatomic methods which measure the basic physical characteristics of tissue such as their density and biological imaging techniques which measure functional characteristics such as metabolism. In this review we consider anatomical imaging techniques. Biological imaging is considered in another article. Anatomical imaging is generally used for goals (i) and (ii) above. Computed tomography (CT) has been the mainstay of anatomical treatment planning for many years, enabling some delineation of soft tissue as well as radiation attenuation estimation for dose prediction. Magnetic resonance imaging is fast becoming widespread alongside CT, enabling superior soft-tissue visualization. Traditionally scanning for treatment planning has relied on the use of a single snapshot scan. Recent years have seen the development of techniques such as 4D CT and adaptive radiotherapy (ART). In 4D CT raw data are encoded with phase information and reconstructed to yield a set of scans detailing motion through the breathing, or cardiac, cycle. In ART a set of

  2. What use is generic prescribing?

    OpenAIRE

    Archer, Michael

    1985-01-01

    The dispensing of generic preparations at four dispensing chemist shops was investigated by means of a questionnaire. Certain generic prescriptions result in the dispensing of proprietary products despite the existence of generic preparations, and the pharmacist may be reimbursed for the cost of the proprietary drug which has been dispensed. Not all generic prescriptions result in the dispensing of cheaper drugs because of the methods of payment to chemists. If doctors write more generic pres...

  3. Generic phytosanitary irradiation treatments

    International Nuclear Information System (INIS)

    The history of the development of generic phytosanitary irradiation (PI) treatments is discussed beginning with its initial proposal in 1986. Generic PI treatments in use today are 150 Gy for all hosts of Tephritidae, 250 Gy for all arthropods on mango and papaya shipped from Australia to New Zealand, 300 Gy for all arthropods on mango shipped from Australia to Malaysia, 350 Gy for all arthropods on lychee shipped from Australia to New Zealand and 400 Gy for all hosts of insects other than pupae and adult Lepidoptera shipped to the United States. Efforts to develop additional generic PI treatments and reduce the dose for the 400 Gy treatment are ongoing with a broad based 5-year, 12-nation cooperative research project coordinated by the joint Food and Agricultural Organization/International Atomic Energy Agency Program on Nuclear Techniques in Food and Agriculture. Key groups identified for further development of generic PI treatments are Lepidoptera (eggs and larvae), mealybugs and scale insects. A dose of 250 Gy may suffice for these three groups plus others, such as thrips, weevils and whiteflies. - Highlights: ► The history of phytosanitary irradiation (PI) treatments is given. ► Generic PI treatments in use today are discussed. ► Suggestions for future research are presented. ► A dose of 250 Gy for most insects may suffice.

  4. Generic Airspace Survey

    Science.gov (United States)

    Mogford, Richard H.; Bridges, Wayne; Gujarl, Vimmy; Lee, Paul U.; Preston, William

    2013-01-01

    This paper reports on an extension of generic airspace research to explore the amount of memorization and specialized skills required to manage sectors with specific characteristics or factors. Fifty-five retired controllers were given an electronic survey where they rated the amount of memorization or specialized skills needed for sixteen generic airspace factors. The results suggested similarities in the pattern of ratings between different areas of the US (East, Central, and West). The average of the ratings for each area also showed some differences between regions, with ratings being generally higher in the East area. All sixteen factors were rated as moderately to highly important and may be useful for future research on generic airspace, air traffic controller workload, etc.

  5. Generic Kalman Filter Software

    Science.gov (United States)

    Lisano, Michael E., II; Crues, Edwin Z.

    2005-01-01

    The Generic Kalman Filter (GKF) software provides a standard basis for the development of application-specific Kalman-filter programs. Historically, Kalman filters have been implemented by customized programs that must be written, coded, and debugged anew for each unique application, then tested and tuned with simulated or actual measurement data. Total development times for typical Kalman-filter application programs have ranged from months to weeks. The GKF software can simplify the development process and reduce the development time by eliminating the need to re-create the fundamental implementation of the Kalman filter for each new application. The GKF software is written in the ANSI C programming language. It contains a generic Kalman-filter-development directory that, in turn, contains a code for a generic Kalman filter function; more specifically, it contains a generically designed and generically coded implementation of linear, linearized, and extended Kalman filtering algorithms, including algorithms for state- and covariance-update and -propagation functions. The mathematical theory that underlies the algorithms is well known and has been reported extensively in the open technical literature. Also contained in the directory are a header file that defines generic Kalman-filter data structures and prototype functions and template versions of application-specific subfunction and calling navigation/estimation routine code and headers. Once the user has provided a calling routine and the required application-specific subfunctions, the application-specific Kalman-filter software can be compiled and executed immediately. During execution, the generic Kalman-filter function is called from a higher-level navigation or estimation routine that preprocesses measurement data and post-processes output data. The generic Kalman-filter function uses the aforementioned data structures and five implementation- specific subfunctions, which have been developed by the user on

  6. Integration of generic issues

    International Nuclear Information System (INIS)

    The NRC has recognized the need to integrate generic issues (GIs). The GI process includes a number of phases, all of which should recognize the potential for overlap and conflict among related issues. In addition to the issues themselves, other related NRC and industry programs and activities need to be factored into the GI process. Integration has taken place, or is taking place, for a number of GIs. Each case of integration involves a specific set of circumstances and, as a result, the way in which integration proceeds can vary. This paper discusses the integration of issues in the generic issue process and provides a number of examples

  7. Transoral Surgery: An Anatomic Study

    OpenAIRE

    Rock, Jack P.; Tomecek, Frank J.; Ross, Lawrence

    1993-01-01

    The transoral approaches have become commonplace in modern neurosurgical practice for treatment of ventral midline lesions of the clivus and upper cervical spine. Although the standard technique of transoral surgery is conceptually simple, anatomic relationships are not so readily appreciated. The present study was undertaken in an effort to define more clearly the midline anatomic relationships as they pertain to the standard transoral and transpalatine operations. The anatomic relationships...

  8. Generic Clearance Values

    International Nuclear Information System (INIS)

    This paper analyzes the Generic Clearance Values established for natural and artificial radionuclides with the objective of evaluating their degree of conservatism in views of adopting them into the regulatory body. Generic clearance values for natural radionuclides have been chosen by experts judgments as the optimum boundary between, on the one hand, the ubiquitous unmodified soil concentrations and, on the other hand, activity concentrations in ores, mineral sands, industrial residues and wastes. For artificial radionuclides the clearance levels have been derived from the scenarios postulated in the document Safety Reports Series 44 of the IAEA considering quantitative exemption criteria. A set of 8 scenarios were postulated covering external, ingestion and inhalation exposure pathways. For each radionuclide, the generic clearance level was derived as the more restrictive value obtained from the scenarios, that is the lowest ratio between the applicable individual dose and the dose per unit activity concentration (Bq/g). The individual dose was calculated by a formula depending on each scenario and pathway, with different parameters, such as exposure time, dosimetric factors, dilution factor, density of the material, geometric factors, etc. It was concluded that the basis and parameters used for the derivation of the generic clearance levels are quite conservative and therefore its the adoption in Argentina has been recommended. It is expected that their implementation will contribute to optimize the regulatory management system. (authors)

  9. Generic clearance values

    International Nuclear Information System (INIS)

    This paper analyzes the Generic Clearance Values established for natural and artificial radionuclides with the objective of evaluating their degree of conservatism in views of adopting them into the regulatory body. Generic clearance values for natural radionuclides have been chosen by experts judgments as the optimum boundary between, on one hand, the ubiquitous unmodified soil concentrations and, on the other hand, activity concentrations in ores, mineral sands, industrial residues and wastes. For artificial radionuclides the clearance levels have been derived from the scenarios postulated in the document 'Safety Reports Series Nr 44' of the IAEA considering quantitative exemption criteria. A set of 8 scenarios were postulated covering external, ingestion and inhalation exposure pathways. For each radionuclide, the generic clearance level was derived as the more restrictive value obtained from the scenarios, that is the lowest ratio between the applicable individual dose and the dose per unit activity concentration (Bq/g). The individual dose was calculated by a formula depending on each scenario and pathway, with different parameters, such as exposure time, dosimetric factors, dilution factor, density of the material, geometric factors, etc. It was concluded that the basis and parameters used for the derivation of the generic clearance levels are quite conservative and therefore its the adoption in Argentina has been recommended. It is expected that their implementation will contribute to optimize the regulatory management system. (author)

  10. Generic phytosanitary irradiation treatments

    International Nuclear Information System (INIS)

    The history of the development of generic phytosanitary irradiation (PI) treatments is discussed beginning with its initial proposal in 1986. Generic PI treatments in use today are 150 Gy for all hosts of Tephritidae, 250 Gy for all arthropods on mango and papaya shipped from Australia to New Zealand, 300 Gy for all arthropods on mango shipped from Australia to Malaysia, 350 Gy for all arthropods on lychee shipped from Australia to New Zealand and 400 Gy for all hosts of insects other than pupae and adult Lepidoptera shipped to the United States. Efforts to develop additional generic PI treatments and reduce the dose for the 400 Gy treatment are ongoing with a broad based 5-year, 12-nation cooperative research project coordinated by the joint Food and Agricultural Organization/International Atomic Energy Agency Program on Nuclear Techniques in Food and Agriculture. Key groups identified for further development of generic PI treatments are Lepidoptera (eggs and larvae), mealybugs and scale insects. A dose of 250 Gy may suffice for these three groups plus others, such as thrips, weevils and whiteflies. (author)

  11. Practicing the Generic (City)

    DEFF Research Database (Denmark)

    Hansen, Lone Koefoed

    2010-01-01

    Flanagan proposes that most locative media artworks neglect the particularities of spaces, their historical and political layers. Koolhaas, on the other hand, states that all urban areas are alike, that we are facing a global Generic City. The paper analyses digital media artist Esther Polak’s No...

  12. Tracking in anatomic pathology.

    Science.gov (United States)

    Pantanowitz, Liron; Mackinnon, Alexander C; Sinard, John H

    2013-12-01

    Bar code-based tracking solutions, long present in clinical pathology laboratories, have recently made an appearance in anatomic pathology (AP) laboratories. Tracking of AP "assets" (specimens, blocks, slides) can enhance laboratory efficiency, promote patient safety, and improve patient care. Routing of excess clinical material into research laboratories and biorepositories are other avenues that can benefit from tracking of AP assets. Implementing tracking is not as simple as installing software and turning it on. Not all tracking solutions are alike. Careful analysis of laboratory workflow is needed before implementing tracking to assure that this solution will meet the needs of the laboratory. Such analysis will likely uncover practices that may need to be modified before a tracking system can be deployed. Costs that go beyond simply that of purchasing software will be incurred and need to be considered in the budgeting process. Finally, people, not technology, are the key to assuring quality. Tracking will require significant changes in workflow and an overall change in the culture of the laboratory. Preparation, training, buy-in, and accountability of the people involved are crucial to the success of this process. This article reviews the benefits, available technology, underlying principles, and implementation of tracking solutions for the AP and research laboratory. PMID:23634908

  13. Generic wormhole throats

    CERN Document Server

    Visser, M; Visser, Matt; Hochberg, David

    1997-01-01

    Wormholes and black holes have traditionally been treated a quite separate objects with relatively little overlap. The possibility of a connection arises in that wormholes, if they exist, might have profound influence on black holes, their event horizons, and their internal structure. After discussing some connections, we embark on an overview of what can generally be said about traversable wormhole throats. We discuss the violations of the energy conditions that typically occur at and near the throat of any traversable wormhole and emphasize the generic nature of this result. We discuss the original Morris-Thorne wormhole and its generalization to a spherically symmetric time-dependent wormhole, and also discuss spherically symmetric Brans-Dicke wormholes. We also discuss the relationship with the topological censorship theorem. Finally we turn to a rather general class of wormholes that permit explicit analysis: generic static traversable wormholes (without any symmetry). We define the wormhole throat in te...

  14. Generic Reed Solomon Encorder

    Directory of Open Access Journals (Sweden)

    Petrus Mursanto

    2006-11-01

    Full Text Available Reed Solomon (RS codes is a mechanism to detect and correct burst of errors in data transmission and storage systems. It provides a solid introduction to foundation mathematical concept of Galois Field algebra and its application. With the development of digital hardware technology, the RS concepts were brought into reality, i.e. the implementation of RS codec chips. This paper presents the development steps of a generic RS encoder using VHDL. The encoder is able to handle generic width of data, variable length of information, number of error as well as variable form of primitive polynomial and generator polynomial used in the system. The design has been implemented for FPGA chip Xilinx XC3S200-5FT256 and has a better performance than commercially available equivalent encoder.

  15. Bioavailability and generic prescribing.

    Science.gov (United States)

    Mindel, J S

    1976-01-01

    Although oral drug bioinequivalence has been attributed to a number of causes (excipients, dosage form, variation in dissolution time, and aging) less is known about bioavailability problems of topical medications in ophthalmology. Factors that can alter drug absorption from solutions (pH, partition coefficient, container impurities, contact time, etc.) are noted, and cases in which bioavailability problems should be considered as causes of therapeutic failure are discussed. Various attitudes representing pharmaceutical companies, the federal government, pharmacists, consumers and physicians toward the related problems of bioinequivalence and generic prescribing are examined. Techniques for in vivo and in vitro drug testing and for establishing uniform conditions of drug manufacture and storage can contribute to identification and minimization of bioavailability problems. A rational program based on a combination of such techniques could, ultimately, lead to establishment of the terms "generic equivalency" and "therapeutic equivalency" as synonymous. PMID:13505

  16. Generic Distributed Simulation Architecture

    Energy Technology Data Exchange (ETDEWEB)

    Booker, C.P.

    1999-05-14

    A Generic Distributed Simulation Architecture is described that allows a simulation to be automatically distributed over a heterogeneous network of computers and executed with very little human direction. A prototype Framework is presented that implements the elements of the Architecture and demonstrates the feasibility of the concepts. It provides a basis for a future, improved Framework that will support legacy models. Because the Framework is implemented in Java, it may be installed on almost any modern computer system.

  17. Generic safety documentation model

    Energy Technology Data Exchange (ETDEWEB)

    Mahn, J.A.

    1994-04-01

    This document is intended to be a resource for preparers of safety documentation for Sandia National Laboratories, New Mexico facilities. It provides standardized discussions of some topics that are generic to most, if not all, Sandia/NM facilities safety documents. The material provides a ``core`` upon which to develop facility-specific safety documentation. The use of the information in this document will reduce the cost of safety document preparation and improve consistency of information.

  18. Generic safety documentation model

    International Nuclear Information System (INIS)

    This document is intended to be a resource for preparers of safety documentation for Sandia National Laboratories, New Mexico facilities. It provides standardized discussions of some topics that are generic to most, if not all, Sandia/NM facilities safety documents. The material provides a ''core'' upon which to develop facility-specific safety documentation. The use of the information in this document will reduce the cost of safety document preparation and improve consistency of information

  19. Generic Face Animation

    OpenAIRE

    Cerda, Mauricio; Valenzuela, Renato; Hitschfeld-Kahler, Nancy; Terissi, Lucas; Gomez, Juan C.

    2010-01-01

    International audience In computer vision, the animation of objects has attracted a lot attention, specially the animations of 3D face models. The animation of face models requires in general to manually adapt each generic movement (open/close mouth) to each specific head geometry. In this work we propose a technique for the animation of any face model avoiding most of the manual intervention. In order to achieve this we assume that: (1) faces, despite obvious differences are quite similar...

  20. The wood anatomical range in Ilex (Aquifoliaceae) and its ecological and phylogenetic significance

    NARCIS (Netherlands)

    Baas, P.

    1973-01-01

    The wood anatomy of 81 species of Ilex is described in detail. The wood anatomical range encountered is presented in a generic description (p. 196). Data on ontogenetic changes in vessel member length and number of bars per perforation are given for three species. The great amount of variation in ma

  1. ANATOMICAL PROPERTIES OF PLANTAGO ARENARIA

    OpenAIRE

    Nicoleta IANOVICI; SINITEAN, Adrian; Aurel FAUR

    2011-01-01

    Psammophytes are marked by a number of adaptations that enable them to exist in the hard environmental conditions of the sand habitats. In this study, the anatomical characteristics of Plantago arenaria were examined. Studies were conducted to assess the diversity of anatomical adaptations of vegetative organs in this taxa. Results are presented with original photographs. The analysis of leaf anatomy in P. arenaria showed that the leaves contained a contained xeromorphic traits. Arbuscular my...

  2. Generic patch inference

    DEFF Research Database (Denmark)

    Andersen, Jesper; Lawall, Julia

    2010-01-01

    A key issue in maintaining Linux device drivers is the need to keep them up to date with respect to evolutions in Linux internal libraries. Currently, there is little tool support for performing and documenting such changes. In this paper we present a tool, spdiff, that identifies common changes...... developers can use it to extract an abstract representation of the set of changes that others have made. Our experiments on recent changes in Linux show that the inferred generic patches are more concise than the corresponding patches found in commits to the Linux source tree while being safe with respect to...

  3. An anatomically oriented breast model for MRI

    Science.gov (United States)

    Kutra, Dominik; Bergtholdt, Martin; Sabczynski, Jörg; Dössel, Olaf; Buelow, Thomas

    2015-03-01

    Breast cancer is the most common cancer in women in the western world. In the breast cancer care-cycle, MRIis e.g. employed in lesion characterization and therapy assessment. Reading of a single three dimensional image or comparing a multitude of such images in a time series is a time consuming task. Radiological reporting is done manually by translating the spatial position of a finding in an image to a generic representation in the form of a breast diagram, outlining quadrants or clock positions. Currently, registration algorithms are employed to aid with the reading and interpretation of longitudinal studies by providing positional correspondence. To aid with the reporting of findings, knowledge about the breast anatomy has to be introduced to translate from patient specific positions to a generic representation. In our approach we fit a geometric primitive, the semi-super-ellipsoid to patient data. Anatomical knowledge is incorporated by fixing the tip of the super-ellipsoid to the mammilla position and constraining its center-point to a reference plane defined by landmarks on the sternum. A coordinate system is then constructed by linearly scaling the fitted super-ellipsoid, defining a unique set of parameters to each point in the image volume. By fitting such a coordinate system to a different image of the same patient, positional correspondence can be generated. We have validated our method on eight pairs of baseline and follow-up scans (16 breasts) that were acquired for the assessment of neo-adjuvant chemotherapy. On average, the location predicted and the actual location of manually set landmarks are within a distance of 5.6 mm. Our proposed method allows for automatic reporting simply by uniformly dividing the super-ellipsoid around its main axis.

  4. Generic image matching system

    Science.gov (United States)

    Liang, Zhongjie T.

    1992-05-01

    The generic imaging matching system (GIMS) provides an optimal systematic solution to any problem of color image processing in printing and publishing that can be classified as or modeled to the generic image matching problem defined. Typical GIMS systems/processes include color matching from different output devices, color conversion, color correction, device calibration, colorimetric scanner, colorimetric printer, colorimetric color reproduction, and image interpolation from scattered data. GIMS makes color matching easy for the user and maximizes operational flexibility allowing the user to obtain the degree of match wanted while providing the capability to achieve the best balance with respect to the human perception of color, color fidelity, and preservation of image information and color contrast. Instead of controlling coefficients in a transformation formula, GIMS controls the mapping directly in a standard device-independent color space, so that color can be matched, conceptually, to the highest possible accuracy. An optimization algorithm called modified vector shading was developed to minimize the matching error and to perform a 'near-neighborhood' gamut compression. An automatic error correction algorithm with a multidirection searching procedure using correlated re-initialization was developed to avoid local minimum failures. Once the mapping for color matching is generated, it can be utilized by a multidimensional linear interpolator with a small look-up-table (LUT) implemented by either software, a hardware interpolator or a digital-signal-processor.

  5. Dimensional regularization is generic

    CERN Document Server

    Fujikawa, Kazuo

    2016-01-01

    The absence of the quadratic divergence in the Higgs sector of the Standard Model in the dimensional regularization is usually regarded to be an exceptional property of a specific regularization. To understand what is going on in the dimensional regularization, we illustrate how to reproduce the results of the dimensional regularization for the $\\lambda\\phi^{4}$ theory in the more conventional regularization such as the higher derivative regularization; the basic postulate involved is that the quadratically divergent induced mass, which is independent of the scale change of the physical mass, is kinematical and unphysical. This is consistent with the derivation of the Callan-Symanzik equation, which is a comparison of two theories with slightly different masses, for the $\\lambda\\phi^{4}$ theory without encountering the quadratic divergence. We thus suggest that the dimensional regularization is generic in a bottom-up approach starting with a successful low-energy theory. We also define a modified version of t...

  6. Article choice in plural generics

    NARCIS (Netherlands)

    Farkas, D.F.; Swart, Henriëtte de

    2007-01-01

    We discuss two groups of languages where article use contrasts in generic plural sentences but is otherwise essentially similar. The languages in the first group (English and Dutch) use bare plurals in the expression of kind reference (‘Dinosaurs are extinct’) and in generic generalizations (‘Dogs a

  7. ANATOMICAL PROPERTIES OF PLANTAGO ARENARIA

    Directory of Open Access Journals (Sweden)

    Nicoleta IANOVICI

    2011-01-01

    Full Text Available Psammophytes are marked by a number of adaptations that enable them to exist in the hard environmental conditions of the sand habitats. In this study, the anatomical characteristics of Plantago arenaria were examined. Studies were conducted to assess the diversity of anatomical adaptations of vegetative organs in this taxa. Results are presented with original photographs. The analysis of leaf anatomy in P. arenaria showed that the leaves contained a contained xeromorphic traits. Arbuscular mycorrhizal symbiosis seems to be critical for their survival.

  8. Generic Proxies - Supporting Data Integration Inside the Database

    OpenAIRE

    Vancea, Andrei; Grossniklaus, Michael; Norrie, Moira C.

    2007-01-01

    Existing approaches to data integration generally propose building a layer on top of database systems to perform the necessary data transformations and manage data consistency. We show how support for the integration of heterogeneous data sources can instead be built into a database system through the introduction of a generic proxy concept.

  9. A Generic Dynamic Emulator

    CERN Document Server

    Albert, Carlo

    2011-01-01

    In applied sciences, we often deal with deterministic simulation models that are too slow for simulation-intensive tasks such as calibration or real-time control. In this paper, an emulator for a generic dynamic model, given by a system of ordinary non-linear differential equations, is developed. The non-linear differential equations are linearized and Gaussian white noise is added to account for the non-linearities. The resulting linear stochastic system is conditioned on a set of solutions of the non-linear equations that have been calculated prior to the emulation. A path-integral approach is used to derive the Gaussian distribution of the emulated solution. The solution reveals that most of the computational burden can be shifted to the conditioning phase of the emulator and the complexity of the actual emulation step only scales like $\\mathcal O(Nnm^2)$, where $N$ is the number of time-points at which the solution is to be emulated, $n$ the number of solutions the emulator is conditioned on and $m$ the n...

  10. Quality of generic medicines in South Africa

    DEFF Research Database (Denmark)

    Patel, Aarti; Gauld, Robin; Norris, Pauline;

    2012-01-01

    Generic Medicines are an important policy option allowing for access to affordable, essential medicines. Quality of generic medicines must be guaranteed through the activities of national medicines regulatory authorities. Existing negative perceptions surrounding the quality of generic medicines ...

  11. KIDs are non-generic

    CERN Document Server

    Beig, R; Schön, R

    2004-01-01

    We prove that generic solutions of the vacuum constraint Einstein equations do not possess any global or local space-time Killing vectors, on an asymptotically flat Cauchy surface, or on a compact Cauchy surface with mean curvature close to a constant, or for CMC asymptotically hyperbolic initial data sets. More generally, we show that non-existence of global symmetries implies, generically, non-existence of local ones. As part of the argument, we prove that generic metrics do not possess any local or global conformal Killing vectors.

  12. Generic ISIS Transport Module Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The purpose of the Generic ISIS Transport Module is to provide a means to bring living specimens to and from orbit. In addition to living specimens, the module can...

  13. Hanford Generic Interim Safety Basis

    Energy Technology Data Exchange (ETDEWEB)

    Lavender, J.C.

    1994-09-09

    The purpose of this document is to identify WHC programs and requirements that are an integral part of the authorization basis for nuclear facilities that are generic to all WHC-managed facilities. The purpose of these programs is to implement the DOE Orders, as WHC becomes contractually obligated to implement them. The Hanford Generic ISB focuses on the institutional controls and safety requirements identified in DOE Order 5480.23, Nuclear Safety Analysis Reports.

  14. Quasi-Stability versus Genericity

    CERN Document Server

    Hashemi, Amir; Seiler, Werner M

    2012-01-01

    Quasi-stable ideals appear as leading ideals in the theory of Pommaret bases. We show that quasi-stable leading ideals share many of the properties of the generic initial ideal. In contrast to genericity, quasi-stability is a characteristic independent property that can be effectively verified. We also relate Pommaret bases to some invariants associated with local cohomology, exhibit the existence of linear quotients in Pommaret bases and prove some results on componentwise linear ideals.

  15. Article choice in plural generics

    OpenAIRE

    Farkas, D. F.; Swart, Henriëtte de

    2007-01-01

    We discuss two groups of languages where article use contrasts in generic plural sentences but is otherwise essentially similar. The languages in the first group (English and Dutch) use bare plurals in the expression of kind reference (‘Dinosaurs are extinct’) and in generic generalizations (‘Dogs are intelligent’). The languages in the second group (French, Italian, Hungarian) use definite plurals in both cases (‘Les dinosaures ont disparu’, ‘Les chiens sont intelligents’ in French). We acco...

  16. Hanford Generic Interim Safety Basis

    International Nuclear Information System (INIS)

    The purpose of this document is to identify WHC programs and requirements that are an integral part of the authorization basis for nuclear facilities that are generic to all WHC-managed facilities. The purpose of these programs is to implement the DOE Orders, as WHC becomes contractually obligated to implement them. The Hanford Generic ISB focuses on the institutional controls and safety requirements identified in DOE Order 5480.23, Nuclear Safety Analysis Reports

  17. Digital photography in anatomical pathology

    OpenAIRE

    Leong F; Leong A

    2004-01-01

    Digital imaging has made major inroads into the routine practice of anatomical pathology and replaces photographic prints and Kodachromes for reporting and conference purposes. More advanced systems coupled to computers allow greater versatility and speed of turnaround as well as lower costs of incorporating macroscopic and microscopic pictures into pathology reports and publications. Digital images allow transmission to remote sites via the Internet for consultation, quality assurance and ed...

  18. Generic Graph Grammar: A Simple Grammar for Generic Procedural Modelling

    DEFF Research Database (Denmark)

    Christiansen, Asger Nyman; Bærentzen, Jakob Andreas

    2012-01-01

    greater complexity. Consequently, there is a need for a simple, general method which is capable of generating both types of objects. Generic Graph Grammar has been developed to address this need. The production rules consist of a small set of basic productions which are applied directly onto primitives in...... a directed cyclic graph. Furthermore, the basic productions are chosen such that Generic Graph Grammar seamlessly combines the capabilities of L-systems to imitate biological growth (to model trees, animals, etc.) and those of split grammars to design structured objects (chairs, houses, etc.). This...... results in a highly expressive grammar capable of generating a wide range of types of models. Models which consist of skeletal structures or surfaces or any combination of these. Besides generic modelling capabilities, the focus has also been on usability, especially userfriendliness and efficiency...

  19. Pericarp anatomical study of some lamiaceae nutlets in saudi arabia and its taxonomic significance

    International Nuclear Information System (INIS)

    The nutlets transverse sections of 23 selected taxa belonging to 12 genera of Saudi Arabia Lamiaceae were examined using light microscope and detailed description of the pericarp anatomical characteristics were provided. Nutlets have shown obvious differences in the presence or absence of hairs, papillae, mucilage, endosperm and crystals, also, in thickness of pericarp layers, parenchymatous and sclerenchymataus layers. The relationships between the studied taxa were presented as phenogram. This study confirms the usefulness of the nutlet anatomical features as additional characters in taxonomical studies of the Lamiaceae especially mucilage production (myxocarpy) and the sclerenchymatous layer (shape, pigment, and cavity) of the endocarp. They are diagnostic at the generic and subfamily levels. The anatomical studies indicate the family is polymorphic in pericarp characters. (author)

  20. Anatomical Lecture on a Dishwasher

    Science.gov (United States)

    van de Giesen, Nick

    2016-04-01

    The dishwasher died after faithfully serving the household for over seventeen years. One would expect a MacGyver treasure trove of parts to be found inside. Here, we will present what could be salvaged from a dishwasher that could be of use to hydrological research. The dishwasher's demise was too close to the submission deadline to promise anything in detail but there will be pumps, valves, level sensors, temperature sensors and, perhaps, a turbidity sensor. In addition, there may be more generic parts of interest such as timers, transformers and heaters. What will be presented is a hydrology oriented anatomy lesson of a dishwasher that would make Dr. Nicolaes Tulp proud.

  1. Software synthesis using generic architectures

    Science.gov (United States)

    Bhansali, Sanjay

    1993-01-01

    A framework for synthesizing software systems based on abstracting software system designs and the design process is described. The result of such an abstraction process is a generic architecture and the process knowledge for customizing the architecture. The customization process knowledge is used to assist a designer in customizing the architecture as opposed to completely automating the design of systems. Our approach using an implemented example of a generic tracking architecture which was customized in two different domains is illustrated. How the designs produced using KASE compare to the original designs of the two systems, and current work and plans for extending KASE to other application areas are described.

  2. Exponentially generic subsets of groups

    CERN Document Server

    Gilman, Robert; Osin, Denis

    2010-01-01

    In this paper we study the generic, i.e., typical, behavior of finitely generated subgroups of hyperbolic groups and also the generic behavior of the word problem for amenable groups. We show that a random set of elements of a nonelementary word hyperbolic group is very likely to be a set of free generators for a nicely embedded free subgroup. We also exhibit some finitely presented amenable groups for which the restriction of the word problem is unsolvable on every sufficiently large subset of words.

  3. Digital imaging in anatomic pathology.

    Science.gov (United States)

    O'Brien, M J; Sotnikov, A V

    1996-10-01

    Advances in computer technology continue to bring new innovations to departments of anatomic pathology. This article briefly reviews the present status of digital optical imaging, and explores the directions that this technology may lead over the next several years. Technical requirements for digital microscopic and gross imaging, and the available options for image archival and retrieval are summarized. The advantages of digital images over conventional photography in the conference room, and the usefulness of digital imaging in the frozen section suite and gross room, as an adjunct to surgical signout and as a resource for training and education, are discussed. An approach to the future construction of digital histologic sections and the computer as microscope is described. The digital technologic applications that are now available as components of the surgical pathologist's workstation are enumerated. These include laboratory information systems, computerized voice recognition, and on-line or CD-based literature searching, texts and atlases and, in some departments, on-line image databases. The authors suggest that, in addition to these resources that are already available, tomorrow's surgical pathology workstation will include network-linked digital histologic databases, on-line software for image analysis and 3-D image enhancement, expert systems, and ultimately, advanced pattern recognition capabilities. In conclusion, the authors submit that digital optical imaging is likely to have a significant and positive impact on the future development of anatomic pathology. PMID:8853053

  4. Using Generic Summarization to Improve Music Information Retrieval Tasks

    OpenAIRE

    Raposo, Francisco; Ribeiro, Ricardo; de Matos, David Martins

    2015-01-01

    In order to satisfy processing time constraints, many MIR tasks process only a segment of the whole music signal. This practice may lead to decreasing performance, since the most important information for the tasks may not be in those processed segments. In this paper, we leverage generic summarization algorithms, previously applied to text and speech summarization, to summarize items in music datasets. These algorithms build summaries, that are both concise and diverse, by selecting appropri...

  5. An object oriented approach to generic branch and bound

    OpenAIRE

    Bruin, Arie; Kindervater, Gerard; Trienekens, H.W.J.M.; Goot, R.A.

    1996-01-01

    textabstractBranch and bound algorithms can be characterized by a small set of basic rules that are applied in a divide-and-conquer-like framework. The framework is about the same in all applications, whereas the specification of the rules is problem dependent. Building a framework is a rather simple task in sequential implementations, but must not be underestimated in the parallel case, especially if an efficient branch and bound algorithm is required. In generic branch and bound models, the...

  6. GENERIC model for multiphase systems

    NARCIS (Netherlands)

    Sagis, L.M.C.

    2010-01-01

    GENERIC is a nonequilibrium thermodynamic formalism in which the dynamic behavior of a system is described by a single compact equation involving two types of brackets: a Poisson bracket and a dissipative bracket. This formalism has proved to be a very powerful instrument to model the dynamic behavi

  7. The Generic Model of Computation

    OpenAIRE

    Nachum Dershowitz

    2012-01-01

    Over the past two decades, Yuri Gurevich and his colleagues have formulated axiomatic foundations for the notion of algorithm, be it classical, interactive, or parallel, and formalized them in the new generic framework of abstract state machines. This approach has recently been extended to suggest a formalization of the notion of effective computation over arbitrary countable domains. The central notions are summarized herein.

  8. Anatomic consideration for preventive implantation.

    Science.gov (United States)

    Denissen, H W; Kalk, W; Veldhuis, H A; van Waas, M A

    1993-01-01

    The aim of preventive implant therapy is to prevent or delay loss of alveolar ridge bone mass. For use in an anatomic study of 60 mandibles, resorption of the alveolar ridge was classified into four preventive stages: (1) after extraction of teeth; (2) after initial resorption; (3) when the ridge has atrophied to a knife-edge shape; and (4) when only basal bone remains. Implantation in stage 3 necessitates removal of the knife-edge ridge to create space for cylindrical implants. Therefore, implantation in stage 2 is advocated to prevent the development of stage 3. The aim of implantation in stage 4 is to prevent total loss of function of the atrophic mandible. PMID:8359876

  9. Building and assessing anatomically relevant phantoms for neonatal transcranial ultrasound

    Energy Technology Data Exchange (ETDEWEB)

    Memoli, G; Sadhoo, N; Gelat, P; Shaw, A [Acoustics and Ionising Radiation Division, National Physical Laboratory, Teddington (United Kingdom); Gatto, M; Harris, R A, E-mail: gianluca.memoli@npl.co.uk [Wolfson School of Mechanical and Manufacturing Engineering, Loughborough University, Loughborough (United Kingdom)

    2011-02-01

    This study describes the design and construction of a clinically relevant phantom to survey the temperature increase caused by ultrasound equipment, as currently used in neonatal head-scanning in the UK. The phantom is an ellipsoid of bone-mimic material, filled with brain-mimic; a circular hole in the external surface mimicks the fontanel, through which most clinically relevant scans are made. Finite-element simulations were used to identify possible hot spots and decide the most effective thermocouple positions within the phantom to investigate temperature rise during a typical scan. Novel materials were purposively designed to simulate key acoustic and thermal properties. Three Dimensional Printing (3DP) was employed for the fabrication of the skull phantom, and a specific strategy was successfully pursued to embed a thermocouple within the 3DP skull phantom during the manufacturing process. An in-process Non-Destructive Analysis (NDA) was used to assess the correct position of the deposited thermocouple inside the fabricated skull phantom. The temperature increase in the phantom for a typical trans-fontanellar scan is also presented here. The current phantom will be used in a hospital survey in the UK and, in its final design, will allow for a more reliable evaluation of ultrasound heating than is currently possible.

  10. Pharmaceutical Policy regarding Generic Drugs in Belgium

    OpenAIRE

    Steven Simoens; Kristien De Bruyn; Marc Bogaert; Gert Laekeman

    2005-01-01

    Pressure to control pharmaceutical expenditure and price competition among pharmaceutical companies are fuelling the development of generic drug markets in EU countries. However, in Belgium, the market for generic drugs is underdeveloped compared with other countries. To promote the use of generic drugs, the government introduced a reference pricing (RP) scheme in 2001. The aim of this paper is to discuss Belgian pharmaceutical policy regarding generic drugs and to analyse how the Belgian dru...

  11. Enhancing Safety through Generic Competencies

    Directory of Open Access Journals (Sweden)

    S. Mockel

    2014-03-01

    Full Text Available This article provides insights into proactive safety management and mitigation. An analysis of accident reports reveals categories of supervening causes of accidents which can be directly linked to the concept of generic competencies (information management, communication and coordination, problem solving, and effect control. These findings strongly suggest adding the human element as another safety-constituting pillar to the concept of ship safety next to technology and regulation. We argue that the human element has unique abilities in dealing with critical and highly dynamic situations which can contribute to the system's recovery from non-routine or critical situations. By educating seafarers in generic competencies we claim to enable the people onboard to successfully deal with critical situations.

  12. 77 FR 30560 - Proposed Generic Communication; Generic Letter on Seismic Risk Evaluations for Operating Reactors

    Science.gov (United States)

    2012-05-23

    ... Operating Reactors'' published on September 1, 2011 (76 FR 54507). The draft Generic Letter, ``Seismic Risk... COMMISSION Proposed Generic Communication; Generic Letter on Seismic Risk Evaluations for Operating Reactors...: On September 1, 2011 (76 FR 54507), the NRC published for public comment Draft Generic Letter...

  13. Brain Morphometry Using Anatomical Magnetic Resonance Imaging

    Science.gov (United States)

    Bansal, Ravi; Gerber, Andrew J.; Peterson, Bradley S.

    2008-01-01

    The efficacy of anatomical magnetic resonance imaging (MRI) in studying the morphological features of various regions of the brain is described, also providing the steps used in the processing and studying of the images. The ability to correlate these features with several clinical and psychological measures can help in using anatomical MRI to…

  14. Enhancing Safety through Generic Competencies

    OpenAIRE

    S. Mockel; M. Brenker; S. Strohschneider

    2014-01-01

    This article provides insights into proactive safety management and mitigation. An analysis of accident reports reveals categories of supervening causes of accidents which can be directly linked to the concept of generic competencies (information management, communication and coordination, problem solving, and effect control). These findings strongly suggest adding the human element as another safety-constituting pillar to the concept of ship safety next to technology and regulation. We argue...

  15. Biofabrication of multi-material anatomically shaped tissue constructs

    International Nuclear Information System (INIS)

    Additive manufacturing in the field of regenerative medicine aims to fabricate organized tissue-equivalents. However, the control over shape and composition of biofabricated constructs is still a challenge and needs to be improved. The current research aims to improve shape, by converging a number of biocompatible, quality construction materials into a single three-dimensional fiber deposition process. To demonstrate this, several models of complex anatomically shaped constructs were fabricated by combined deposition of poly(vinyl alcohol), poly(ε-caprolactone), gelatin methacrylamide/gellan gum and alginate hydrogel. Sacrificial components were co-deposited as temporary support for overhang geometries and were removed after fabrication by immersion in aqueous solutions. Embedding of chondrocytes in the gelatin methacrylamide/gellan component demonstrated that the fabrication and the sacrificing procedure did not affect cell viability. Further, it was shown that anatomically shaped constructs can be successfully fabricated, yielding advanced porous thermoplastic polymer scaffolds, layered porous hydrogel constructs, as well as reinforced cell-laden hydrogel structures. In conclusion, anatomically shaped tissue constructs of clinically relevant sizes can be generated when employing multiple building and sacrificial materials in a single biofabrication session. The current techniques offer improved control over both internal and external construct architecture underscoring its potential to generate customized implants for human tissue regeneration. (paper)

  16. Testing anatomically specified hypotheses in functional imaging using cytoarchitectonic maps.

    Science.gov (United States)

    Eickhoff, Simon B; Heim, Stefan; Zilles, Karl; Amunts, Katrin

    2006-08-15

    The statistical inference on functional imaging data is severely complicated by the embedded multiple testing problem. Defining a region of interest (ROI) where the activation is hypothesized a priori helps to circumvent this problem, since in this case the inference is restricted to fewer simultaneous tests, rendering it more sensitive. Cytoarchitectonic maps obtained from postmortem brains provide objective, a priori ROIs that can be used to test anatomically specified hypotheses about the localization of functional activations. We here analyzed three methods for the definition of ROIs based on probabilistic cytoarchitectonic maps. (1) ROIs defined by the volume assigned to a cytoarchitectonic area in the summary map of all areas (maximum probability map, MPM), (2) ROIs based on thresholding the individual probabilistic maps and (3) spherical ROIs build around the cytoarchitectonic center of gravity. The quality with which the thus defined ROIs represented the respective cytoarchitectonic areas as well as their sensitivity for detecting functional activations was subsequently statistically evaluated. Our data showed that the MPM method yields ROIs, which reflect most adequately the underlying anatomical hypotheses. These maps also show a high degree of sensitivity in the statistical analysis. We thus propose the use of MPMs for the definition of ROIs. In combination with thresholding based on the Gaussian random field theory, these ROIs can then be applied to test anatomically specified hypotheses in functional neuroimaging studies. PMID:16781166

  17. Pharmaceutical regulation, mandatory substitution, and generic competition

    OpenAIRE

    Birg, Laura

    2015-01-01

    This paper studies the effect of two regulatory instruments - a price cap and a reference price system - a mandatory substitution rule, and the combination of both on generic competition in a Salop-type model with an off-patent brand-name drug and n differentiated generic versions. The price cap reduces only the brand-name price, the reference price system reduces the brand-name price and generic prices. Both regulatory instruments reduce the generic market share and the number of generic com...

  18. Generic maximum likely scale selection

    DEFF Research Database (Denmark)

    Pedersen, Kim Steenstrup; Loog, Marco; Markussen, Bo

    2007-01-01

    this work is on applying this selection principle under a Brownian image model. This image model provides a simple scale invariant prior for natural images and we provide illustrative examples of the behavior of our scale estimation on such images. In these illustrative examples, estimation is based on......The fundamental problem of local scale selection is addressed by means of a novel principle, which is based on maximum likelihood estimation. The principle is generally applicable to a broad variety of image models and descriptors, and provides a generic scale estimation methodology. The focus in...

  19. Generic communications index: User's manual

    International Nuclear Information System (INIS)

    This report is a manual for providing information required to use a special computer program developed by the NRC for indexing generic communications. The program is written in a user-friendly menu driven form using dBASE III programming language. It facilitates use of the required dBASE III search and sort capabilities to access records in a database called Generic Communications Index. This index is made up of one record each for all bulletins, circulars, and information notices, including revisions and supplements, from 1971, when such documentation started, through 1986 (or to the latest update). The program is designed for use by anyone modestly acquainted with the general use of IBM-compatible personal computers. The manual contains both a brief overview and a detailed description of the program, as well as detailed instructions for getting started using the program on a personal computer with either a two-floppy disk or a hard disk system. Included at the end are a brief description of how to handle problems which might occur, and notes on the makeup of the program and database files for help in adding records of communications for future years

  20. Generic Performance Measures. Chapter 8

    International Nuclear Information System (INIS)

    The generic nuclear medicine imager, whether a gamma camera, single photon emission computed tomography (SPECT) system or positron emission tomography (PET) scanner, comprises several main components: a detection system, a form of collimation to select γ rays at specific angles, electronics and a computing system to create the map of the radiotracer distribution. This section discusses these components in more detail. The first stage of a generic nuclear medicine imager is the detection of the γ rays emitted by the radionuclide. In the case of PET, the radiation of interest are the 511 keV annihilation photons that result from the interaction of the positron emitted by the radionuclide with an electron in the tissue. For general nuclear medicine and SPECT, there is one or sometimes more than one γ ray of interest, with energies in the range of 400 keV. The γ rays are detected when they interact and deposit energy in the crystal(s) of the imaging system. There are two main types of detector: crystals that give off light that can be converted to an electrical signal when the γ ray interacts (‘scintillators’) and semiconductors, crystals that generate an electrical signal directly when the γ ray deposits energy in the crystal. Scintillation detectors include NaI(Tl), bismuth germanate (BGO) and lutetium oxyorthosilicate (LSO); semiconductor detectors used in nuclear medicine imagers include cadmium zinc telluride (CZT). Radiation detectors are described in more detail in Chapter 6

  1. Ultrasound Anatomical Visualization of the rabbit liver

    OpenAIRE

    Kamelia Dimcheva Stamatova-Yovcheva; Rosen Dimitrov; David Yovchev; Krassimira Uzunova; Rumen Binev

    2014-01-01

    The topic was to investigate the anatomical features of the rabbit liver by two- and three-dimensional ultrasonography. Eighteen sexually mature healthy clinically New Zealand rabbits aged eight months were studied. Two-dimensional ultarsonographic anatomical image of the rabbit liver presented it in the cranial abdominal region as a relatively hypoechoic finding. Its contours were regular and in close contact with the hyperechoic diaphragm. Liver parenchyma was heterogeneous. The gall bladde...

  2. Development of generic soil profiles and soil data development for SSI analyses

    International Nuclear Information System (INIS)

    This paper presents the approach to developing generic soil profiles for the design of reactor building for small modular reactor (SMR) nuclear power plant developed by NuScale Power. The reactor building is a deeply embedded structure. In order to perform soil structure interaction (SSI) analyses, generic soil profiles are required to be defined for the standardized Nuclear Power Plant (NPP) designs for the United States Nuclear Regulatory Commission (NRC) in a design control document (DCD). The development of generic soil profiles is based on utilization of information on generic soil profiles from the new standardized nuclear power plant designs already submitted to the NRC for license certification. Eleven generic soil profiles have been recommended, and those profiles cover a wide range of parameters such as soil depth, shear wave velocity, unit weight, Poisson's ratio, water table, and depth to rock strata. The soil profiles are developed for a range of shear wave velocities between bounds of 1000 fps and 8000 fps as inferred from NRC Standard Review Plan (NUREG 0800) Sections 3.7.1 and 3.7.2. To account for the soil degradation due to seismic events, the strain compatible soil properties are based on the EPRI generic soil degradation curves. In addition, one dimensional soil dynamic response analyses were performed to study the soil layer input motions for performing the SSI analyses

  3. Skin rash during treatment with generic itraconazole

    Directory of Open Access Journals (Sweden)

    Antonio De Vuono

    2014-01-01

    Full Text Available Generic drugs have the same active substance, the same pharmaceutical form, the same therapeutic indications and a similar bioequivalence with the reference medicinal product (branded. Although a similar efficacy is postulated, some cases of clinical inefficacy during treatment with generic formulations have been reported. In this case, we describe a woman with onychomycosis that developed a skin rash during treatment with a generic formulation of itraconazole. Drug administration and its re-challenge confirmed the association between itraconazole and skin rash. Both Naranjo probability scale and World Health Organization causality assessment scale documented a probable association between generic-itraconazole and skin rash. The switch from generic formulation to brand one induced an improvement of symptoms. Since we are unable to evaluate the role of each excipient in the development of skin rash, we cannot rule out their involvement. However, more data are necessary to better define the similarities or differences between branded and generic formulations.

  4. Developing a generic environmental safety case

    International Nuclear Information System (INIS)

    The Nuclear Decommissioning Authority (NDA) has been charged with implementing the United Kingdom government's policy for the long-term management of higher activity radioactive waste by planning, building and operating a geological disposal facility (GDF). Within the NDA, we - the Radioactive Waste Management Directorate (RWMD) - are tasked with the development of a GDF. The UK government has also decided that a process of voluntarism and partnership will be followed to identify a suitable site for the GDF. To date there is no volunteer community and the site selection process to find a volunteer host community is under review. RWMD has an ongoing role to provide advice to UK radioactive waste producers on the conditioning and packaging of wastes and to undertake disposability assessments of waste packaging proposals to determine their suitability for eventual disposal in a GDF. We also need to demonstrate our confidence that a GDF would be safe. Therefore RWMD has published a generic Environmental Safety Case (ESC) (NDA, 2010) to demonstrate that we are confident that a GDF could be developed to meet the guidelines set down by the environmental regulators (EA/NIEA, 2009) in a range of geological settings. The ESC includes reference case calculations that are used as a benchmark for disposability assessments. (author)

  5. Modeling generic aspects of ideal fibril formation

    Energy Technology Data Exchange (ETDEWEB)

    Michel, D., E-mail: denis.michel@live.fr [Universite de Rennes1-IRSET, Campus de Beaulieu Bat. 13, 35042 Rennes (France)

    2016-01-21

    Many different proteins self-aggregate into insoluble fibrils growing apically by reversible addition of elementary building blocks. But beyond this common principle, the modalities of fibril formation are very disparate, with various intermediate forms which can be reshuffled by minor modifications of physico-chemical conditions or amino-acid sequences. To bypass this complexity, the multifaceted phenomenon of fibril formation is reduced here to its most elementary principles defined for a linear prototype of fibril. Selected generic features, including nucleation, elongation, and conformational recruitment, are modeled using minimalist hypotheses and tools, by separating equilibrium from kinetic aspects and in vitro from in vivo conditions. These reductionist approaches allow to bring out known and new rudiments, including the kinetic and equilibrium effects of nucleation, the dual influence of elongation on nucleation, the kinetic limitations on nucleation and fibril numbers, and the accumulation of complexes in vivo by rescue from degradation. Overlooked aspects of these processes are also pointed: the exponential distribution of fibril lengths can be recovered using various models because it is attributable to randomness only. It is also suggested that the same term “critical concentration” is used for different things, involved in either nucleation or elongation.

  6. [Establishment of anatomical terminology in Japan].

    Science.gov (United States)

    Shimada, Kazuyuki

    2008-12-01

    The history of anatomical terminology in Japan began with the publication of Waran Naikei Ihan-teimŏ in 1805 and Chŏtei Kaitai Shinsho in 1826. Although the establishment of Japanese anatomical terminology became necessary during the Meiji era when many western anatomy books imported into Janan were translated, such terminology was not unified during this period and varied among translators. In 1871, Tsukumo Ono's Kaibŏgaku Gosen was published by the Ministry of Education. Although this book is considered to be the first anatomical glossary terms in Japan, its contents were incomplete. Overseas, the German Anatomical Society established a unified anatomical terminology in 1895 called the Basle Nomina Anatomica (B.N.A.). Based on this development, Kaibŏgaku Meishŭ which follows the BNA, by Buntarŏ Suzuki was published in 1905. With the subsequent establishment in 1935 of Jena Nomina Anatomica (J.N.A.), the unification of anatomical terminology was also accelerated in Japan, leading to the further development of terminology. PMID:19108488

  7. GENERIC COMMODITY PROMOTION AND PRODUCT DIFFERENTIATION

    OpenAIRE

    John M Crespi

    1999-01-01

    This paper considers whether generic promotion lowers the differentiation among competing brands as claimed in the 1997 Supreme Court case (Wileman et al. v. Glickman). Commodity promotion is modeled as a multi-stage game where products are vertically differentiated. Analytical results show that if the benefits of generic advertising from increased demand are outweighed by the costs from lower product differentiation then high-quality producers will not benefit from generic promotion but prod...

  8. Specifying Generic Java Programs: two case studies

    OpenAIRE

    Giorgetti, Alain; Marché, Claude; Tushkanova, Elena; Kouchnarenko, Olga

    2010-01-01

    This work investigates the question of modular specification of generic Java classes and methods. We propose extensions to the Krakatoa Modeling Language, a part of the Why platform for proving that a Java or C program is a correct implementation of some specification. The new constructs we propose for the specification of generic Java programs are presented through two significant examples: the specification of the generic method for sorting arrays which comes from the java.util.Arrays class...

  9. PROBLEM OF GENERIC REPLACEMENT: ADVANTAGES AND DISADVANTAGES

    Directory of Open Access Journals (Sweden)

    S. N. Tolpygina

    2016-01-01

    Full Text Available The main differences between original and generic drugs as well as registration criteria for generics are described. Possible reasons of discrepancy in bioequivalence and therapeutic equivalence of original and generic drugs are reviewed. The examples of such a discrepancy as a result of comparative clinical trails (enalapril maleate are discussed. Approaches to planning of comparative trails on drug therapeutic equivalence are presented. 

  10. DOES GENERIC ADVERTISING WRAP DEMAND CURVATURE?

    OpenAIRE

    Weaver, Robert D.; Chin, Ming-Chin

    2002-01-01

    This paper reconsiders the impacts of generic advertising on commodity prices that may be induced through demand effects. Rather than considering a simple demand shift, we consider the possibility that advertising leads to a change in the curvature of the demand curve. In this case, generic advertising is shown to affect both the level of market prices as well as their volatility. Based on parametric tests, we find that the demand elasticity appears to be affected by the intensity of generic ...

  11. Reference pricing with endogenous generic entry

    OpenAIRE

    Brekke, Kurt R.; Canta, Chiara; Straume, Odd Rune

    2015-01-01

    In this paper we study the effect of reference pricing on pharmaceutical prices and ex-penditures when generic entry is endogenously determined. We develop a Salop-type model where a brand-name producer competes with generic producers in terms of prices. In the market there are two types of consumers: (i) brand biased consumers who choose between brand-name and generic drugs, and (ii) brand neutral consumers who choose between the different generic drugs. We find that, for a given number of ...

  12. Analysis of French generic medicines retail market: why the use of generic medicines is limited.

    Science.gov (United States)

    Dylst, Pieter; Vulto, Arnold; Simoens, Steven

    2014-12-01

    The market share of generic medicines in France is low compared to other European countries. This perspective paper provides an overview of the generic medicines retail market in France and how the current policy environment may affect the long-term sustainability. Looking at the French generic medicines retail market and the surrounding regulatory framework, all conditions seem to be in place to create a healthy generic medicines market: the country has well-respected regulatory authorities, generic medicines enter the market in a timely manner and prices of generic medicines are competitive compared with other European countries. Despite the success of the demand-side policies targeted at pharmacists and patients, those targeted at physicians were less successful due to a lack of enforcement and a lack of trust in generic medicines by French physicians. Recommendations to increase the use of generic medicines in France round off this perspective paper. PMID:25095903

  13. Generic approach for synthesizing asymmetric nanoparticles and nanoassemblies

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Yugang; Hu, Yongxing

    2015-05-26

    A generic route for synthesis of asymmetric nanostructures. This approach utilizes submicron magnetic particles (Fe.sub.3O.sub.4--SiO.sub.2) as recyclable solid substrates for the assembly of asymmetric nanostructures and purification of the final product. Importantly, an additional SiO.sub.2 layer is employed as a mediation layer to allow for selective modification of target nanoparticles. The partially patched nanoparticles are used as building blocks for different kinds of complex asymmetric nanostructures that cannot be fabricated by conventional approaches. The potential applications such as ultra-sensitive substrates for surface enhanced Raman scattering (SERS) have been included.

  14. Children's generic interpretation of pretense.

    Science.gov (United States)

    Baer, Carolyn; Friedman, Ori

    2016-10-01

    We report two experiments investigating how 3- to 5-year-olds learn general knowledge from pretend play-how they learn about kinds of things (e.g., information about dogs) from information about particular individuals in pretend play (a certain dog in a pretend scenario). Children watched pretend-play enactments in which animals showed certain behaviors or heard utterances conveying the same information. When children were subsequently asked about who shows the behavior, children who watched pretend play were more likely to give generic responses than were children who heard the utterances. These findings show that children generalize information from pretend play to kinds even without being prompted to think about kinds, that pretend play can be informative about familiar kinds, and also that pretend play is a more potent source for general knowledge than are utterances about individuals. PMID:27268159

  15. Pharmaceutical policy regarding generic drugs in Belgium.

    Science.gov (United States)

    Simoens, Steven; De Bruyn, Kristien; Bogaert, Marc; Laekeman, Gert

    2005-01-01

    Pressure to control pharmaceutical expenditure and price competition among pharmaceutical companies are fuelling the development of generic drug markets in EU countries. However, in Belgium, the market for generic drugs is underdeveloped compared with other countries. To promote the use of generic drugs, the government introduced a reference pricing (RP) scheme in 2001. The aim of this paper is to discuss Belgian pharmaceutical policy regarding generic drugs and to analyse how the Belgian drug market has evolved following initiation of the RP scheme. The market share held by generic drugs increased following implementation of the RP scheme. Focusing on volume, average market share (by semester) for generic drugs amounted to 2.05% of the total pharmaceutical market from January 1998 to June 2001, compared with 6.11% from July 2001 to December 2003. As new generic drugs are introduced, their market share tends to increase in the first couple of months, after which it levels off. Faced with increasing generic competition, some manufacturers have launched new variants of their original drug, thereby effectively extending the period of patent protection. Strategies consisting of price reductions in return for the abolition of prescribing conditions and the launch of new dosages or formulations appear to have been successful in maintaining the market share of original drugs. Nevertheless, the introduction of the RP scheme was associated with savings amounting to 1.8% of pharmaceutical expenditure by the third-party payer in 2001 and 2.1% in 2002. The findings of this paper indicate that the RP scheme has stimulated the Belgian generic drug market. However, existing policy has largely failed to take into account the role that physicians and pharmacists can play in stimulating generic drug use. Therefore, further development of the Belgian generic drug market seems to hinge on the creation of appropriate incentives for physicians to prescribe, and for pharmacists to

  16. 76 FR 54507 - Proposed Generic Communication; Draft NRC Generic Letter 2011-XX: Seismic Risk Evaluations for...

    Science.gov (United States)

    2011-09-01

    ... COMMISSION Proposed Generic Communication; Draft NRC Generic Letter 2011-XX: Seismic Risk Evaluations for... risk and to submit the requested information to facilitate the NRC's determination if there is a need...- mail: Kamal.Manoly@nrc.gov . SUPPLEMENTARY INFORMATION: NRC Generic Letter 2011-XX Seismic...

  17. Lateral laryngopharyngeal diverticulum: anatomical and videofluoroscopic study

    Energy Technology Data Exchange (ETDEWEB)

    Costa, Milton Melciades Barbosa [Universidade Federal do Rio de Janeiro ICB/CCS/UFRJ, Laboratorio de Motilidade Digestiva e Imagem, S. F1-008, Departamento de Anatomia, Rio de Janeiro (Brazil); Koch, Hilton Augusto [Universidade Federal do Rio de Janeiro ICB/CCS/UFRJ, Departamento de Radiologia, Rio de Janeiro (Brazil)

    2005-07-01

    The aims were to characterize the anatomical region where the lateral laryngopharyngeal protrusion occurs and to define if this protrusion is a normal or a pathological entity. This protrusion was observed on frontal contrasted radiographs as an addition image on the upper portion of the laryngopharynx. We carried out a plane-by-plane qualitative anatomical study through macroscopic and mesoscopic surgical dissection on 12 pieces and analyzed through a videofluoroscopic method on frontal incidence the pharyngeal phase of the swallowing process of 33 patients who had a lateral laryngopharyngeal protrusion. The anatomical study allowed us to identify the morphological characteristics that configure the high portion of the piriform recess as a weak anatomical point. The videofluoroscopic study allowed us to observe the laryngopharyngeal protrusion and its relation to pharyngeal repletion of the contrast medium. All kinds of the observed protrusions could be classified as ''lateral laryngopharyngeal diverticula.'' The lateral diverticula were more frequent in older people. These lateral protrusions can be found on one or both sides, usually with a small volume, without sex or side prevalence. This formation is probably a sign of a pharyngeal transference difficulty associated with a deficient tissue resistance in the weak anatomical point of the high portion of the piriform recess. (orig.)

  18. GENERIC DRUG USER FEE: AN OVERVIEW

    Directory of Open Access Journals (Sweden)

    Darshit S. Patel*, Abhishek R. Patel and Narendra A. Patel

    2012-09-01

    Full Text Available The globalization of generic drug manufacturing, supply and testing, and a growing workload that has far outpaced USFDA’s resources has created new challenges. USFDA & Industry propose generic drug user fee to address the need for globalization of the inspection process, and to speed the timely review of generic product applications. The Generic Drug User Fee (GDUF proposal is agreed by generic industry & USFDA and is focused on three key aims: safety, access, and transparency. Under the program, USFDA will receive nearly $1.5 billion over five years in supplemental funding through generic industry user fees in order to help the agency expedite access to generic drugs, enhance drug quality and safety and ensure inspection parity of both foreign and domestic manufacturing sites. GDUF also will help accelerate the market entry of additional manufacturers of drugs currently in short supply and improve quality, consistency, and availability within the supply chain, further helping to mitigate drug shortages. The GDUF new legislation is a milestone for the generic giants and a major win for American health care consumers.

  19. Standardized anatomic space for abdominal fat quantification

    Science.gov (United States)

    Tong, Yubing; Udupa, Jayaram K.; Torigian, Drew A.

    2014-03-01

    The ability to accurately measure subcutaneous adipose tissue (SAT) and visceral adipose tissue (VAT) from images is important for improved assessment and management of patients with various conditions such as obesity, diabetes mellitus, obstructive sleep apnea, cardiovascular disease, kidney disease, and degenerative disease. Although imaging and analysis methods to measure the volume of these tissue components have been developed [1, 2], in clinical practice, an estimate of the amount of fat is obtained from just one transverse abdominal CT slice typically acquired at the level of the L4-L5 vertebrae for various reasons including decreased radiation exposure and cost [3-5]. It is generally assumed that such an estimate reliably depicts the burden of fat in the body. This paper sets out to answer two questions related to this issue which have not been addressed in the literature. How does one ensure that the slices used for correlation calculation from different subjects are at the same anatomic location? At what anatomic location do the volumes of SAT and VAT correlate maximally with the corresponding single-slice area measures? To answer these questions, we propose two approaches for slice localization: linear mapping and non-linear mapping which is a novel learning based strategy for mapping slice locations to a standardized anatomic space so that same anatomic slice locations are identified in different subjects. We then study the volume-to-area correlations and determine where they become maximal. We demonstrate on 50 abdominal CT data sets that this mapping achieves significantly improved consistency of anatomic localization compared to current practice. Our results also indicate that maximum correlations are achieved at different anatomic locations for SAT and VAT which are both different from the L4-L5 junction commonly utilized.

  20. An anatomical and functional model of the human tracheobronchial tree.

    Science.gov (United States)

    Florens, M; Sapoval, B; Filoche, M

    2011-03-01

    The human tracheobronchial tree is a complex branched distribution system in charge of renewing the air inside the acini, which are the gas exchange units. We present here a systematic geometrical model of this system described as a self-similar assembly of rigid pipes. It includes the specific geometry of the upper bronchial tree and a self-similar intermediary tree with a systematic branching asymmetry. It ends by the terminal bronchioles whose generations range from 8 to 22. Unlike classical models, it does not rely on a simple scaling law. With a limited number of parameters, this model reproduces the morphometric data from various sources (Horsfield K, Dart G, Olson DE, Filley GF, Cumming G. J Appl Physiol 31: 207-217, 1971; Weibel ER. Morphometry of the Human Lung. New York: Academic Press, 1963) and the main characteristics of the ventilation. Studying various types of random variations of the airway sizes, we show that strong correlations are needed to reproduce the measured distributions. Moreover, the ventilation performances are observed to be robust against anatomical variability. The same methodology applied to the rat also permits building a geometrical model that reproduces the anatomical and ventilation characteristics of this animal. This simple model can be directly used as a common description of the entire tree in analytical or numerical studies such as the computation of air flow distribution or aerosol transport. PMID:21183626

  1. Congenital neck masses: embryological and anatomical perspectives

    Directory of Open Access Journals (Sweden)

    Zahida Rasool

    2013-08-01

    Full Text Available Neck masses are a common problem in paediatric age group. They tend to occur frequently and pose a diagnostic dilemma to the ENT surgeons. Although the midline and lateral neck masses differ considerably in their texture and presentation but the embryological perspective of these masses is not mostly understood along with the fundamental anatomical knowledge. The article tries to correlate the embryological, anatomical and clinical perspectives for the same. [Int J Res Med Sci 2013; 1(4.000: 329-332

  2. Generic physical protection logic trees

    International Nuclear Information System (INIS)

    Generic physical protection logic trees, designed for application to nuclear facilities and materials, are presented together with a method of qualitative evaluation of the trees for design and analysis of physical protection systems. One or more defense zones are defined where adversaries interact with the physical protection system. Logic trees that are needed to describe the possible scenarios within a defense zone are selected. Elements of a postulated or existing physical protection system are tagged to the primary events of the logic tree. The likelihood of adversary success in overcoming these elements is evaluated on a binary, yes/no basis. The effect of these evaluations is propagated through the logic of each tree to determine whether the adversary is likely to accomplish the end event of the tree. The physical protection system must be highly likely to overcome the adversary before he accomplishes his objective. The evaluation must be conducted for all significant states of the site. Deficiencies uncovered become inputs to redesign and further analysis, closing the loop on the design/analysis cycle

  3. Generic OPC UA Server Framework

    Science.gov (United States)

    Nikiel, Piotr P.; Farnham, Benjamin; Filimonov, Viatcheslav; Schlenker, Stefan

    2015-12-01

    This paper describes a new approach for generic design and efficient development of OPC UA servers. Development starts with creation of a design file, in XML format, describing an object-oriented information model of the target system or device. Using this model, the framework generates an executable OPC UA server application, which exposes the per-design OPC UA address space, without the developer writing a single line of code. Furthermore, the framework generates skeleton code into which the developer adds the necessary logic for integration to the target system or device. This approach allows both developers unfamiliar with the OPC UA standard, and advanced OPC UA developers, to create servers for the systems they are experts in while greatly reducing design and development effort as compared to developments based purely on COTS OPC UA toolkits. Higher level software may further benefit from the explicit OPC UA server model by using the XML design description as the basis for generating client connectivity configuration and server data representation. Moreover, having the XML design description at hand facilitates automatic generation of validation tools. In this contribution, the concept and implementation of this framework is detailed along with examples of actual production-level usage in the detector control system of the ATLAS experiment at CERN and beyond.

  4. Generic physical protection logic trees

    Energy Technology Data Exchange (ETDEWEB)

    Paulus, W.K.

    1981-10-01

    Generic physical protection logic trees, designed for application to nuclear facilities and materials, are presented together with a method of qualitative evaluation of the trees for design and analysis of physical protection systems. One or more defense zones are defined where adversaries interact with the physical protection system. Logic trees that are needed to describe the possible scenarios within a defense zone are selected. Elements of a postulated or existing physical protection system are tagged to the primary events of the logic tree. The likelihood of adversary success in overcoming these elements is evaluated on a binary, yes/no basis. The effect of these evaluations is propagated through the logic of each tree to determine whether the adversary is likely to accomplish the end event of the tree. The physical protection system must be highly likely to overcome the adversary before he accomplishes his objective. The evaluation must be conducted for all significant states of the site. Deficiencies uncovered become inputs to redesign and further analysis, closing the loop on the design/analysis cycle.

  5. Generic adversary characteristics: summary report

    International Nuclear Information System (INIS)

    The adversaries studied were found to be complex, often unpredictable, and dynamic. The adversary typically goes through a complex decision-making process between the time a potential target is identified and the moment the decision to act is made. This study analyzes the adversary characteristics, and the following conclusions are made: one of the least likely methods of attack is an overt armed assault. Terrorists and psychotics depend upon a high degree of personal dedication. No single generic adversary group or individual exhibits strength in every characteristic. Physical danger appears to have some deterrent effect on all adversaries except the psychotics. Organized and professional criminals often try to recruit insiders. Disoriented persons, white-collar criminals, and disgruntled employees tend to operate as insiders. Professional criminals, many terrorist groups, some extremist protest groups, and certain disoriented persons plan carefully before initiating a criminal mission. Organized crime and miscellaneous criminal adversaries rely on deception and ruse to bypass security. After the decision to commit a crime, the resources deployed by terrorists or organized criminals will be a function of their perception of the operational requirements of the crime. The nature of ''threat'' is dynamic; adversary behavior and capability appear to be related to prevailing political, economic, and social conditions

  6. Generic Magnetic Fusion Reactor Revisited

    Science.gov (United States)

    Sheffield, John; Milora, Stanley

    2015-11-01

    The original Generic Magnetic Fusion Reactor paper was published in 1986. This update describes what has changed in 30 years. Notably, the construction of ITER is providing important benchmark numbers for technologies and costs. In addition, we use a more conservative neutron wall flux and fluence. But these cost-increasing factors are offset by greater optimism on the thermal-electric conversion efficiency and potential availability. The main examples show the cost of electricity (COE) as a function of aspect ratio and neutron flux to the first wall. The dependence of the COE on availability, thermo-electric efficiency, electrical power output, and the present day's low interest rates is also discussed. Interestingly, at fixed aspect ratio there is a shallow minimum in the COE at neutron flux around 2.5 MW/m2. The possibility of operating with only a small COE penalty at even lower wall loadings (to 1.0 MW/m2 at larger plant size) and the use of niobium-titanium coils are also investigated. J. Sheffield was supported by ORNL subcontract 4000088999 with the University of Tennessee.

  7. Generic Penetration of the SSRI Market

    OpenAIRE

    Cascade, Elisa F.; Kalali, Amir H.

    2008-01-01

    In this article, we investigate the penetration of generic selective serotonin reuptake inhibitors (SSRIs) in the US market and the implications for patient out-of-pocket expense. The data suggest that generic penetration into the SSRI market has grown from approximately nine percent in 2000, the year that the patent for Prozac® expired, to 72 percent in 2007. For December, 2007, the difference in patient out-of-pocket expense for branded vs. generic agents was, on average, $55.42 for patient...

  8. Report of a rare anatomic variant

    DEFF Research Database (Denmark)

    De Brucker, Y; Ilsen, B; Muylaert, C;

    2015-01-01

    We report the CT findings in a case of partial anomalous pulmonary venous return (PAPVR) from the left upper lobe in an adult. PAPVR is an anatomic variant in which one to three pulmonary veins drain into the right atrium or its tributaries, rather than into the left atrium. This results in a lef...

  9. Evolution of the Anatomical Theatre in Padova

    Science.gov (United States)

    Macchi, Veronica; Porzionato, Andrea; Stecco, Carla; Caro, Raffaele

    2014-01-01

    The anatomical theatre played a pivotal role in the evolution of medical education, allowing students to directly observe and participate in the process of dissection. Due to the increase of training programs in clinical anatomy, the Institute of Human Anatomy at the University of Padova has renovated its dissecting room. The main guidelines in…

  10. Magnetic resonance angiography: infrequent anatomic variants

    International Nuclear Information System (INIS)

    We studied through RM angiography (3D TOF) with high magnetic field equipment (1.5 T) different infrequent intracerebral vascular anatomic variants. For their detection we emphasise the value of post-processed images obtained after conventional angiographic sequences. These post-processed images should be included in routine protocols for evaluation of the intracerebral vascular structures. (author)

  11. HPV Vaccine Effective at Multiple Anatomic Sites

    Science.gov (United States)

    A new study from NCI researchers finds that the HPV vaccine protects young women from infection with high-risk HPV types at the three primary anatomic sites where persistent HPV infections can cause cancer. The multi-site protection also was observed at l

  12. Handbook of anatomical models for radiation dosimetry

    CERN Document Server

    Eckerman, Keith F

    2010-01-01

    Covering the history of human model development, this title presents the major anatomical and physical models that have been developed for human body radiation protection, diagnostic imaging, and nuclear medicine therapy. It explores how these models have evolved and the role that modern technologies have played in this development.

  13. Discrete element analysis methods of generic differential quadratures

    CERN Document Server

    Chen, Chang-New

    2008-01-01

    Presents generic differential quadrature, the extended differential quadrature and the related discrete element analysis methods. This book demonstrated their ability for solving generic scientific and engineering problems.

  14. Impacts of Generic Competition and Benefit Management...

    Data.gov (United States)

    U.S. Department of Health & Human Services — According to findings reported in Impacts of Generic Competition and Benefit Management Practices on Spending for Prescription Drugs - Evidence from Medicares Part...

  15. Physician Agency and Adoption of Generic Pharmaceuticals

    OpenAIRE

    Toshiaki Iizuka

    2012-01-01

    I examine physician agency in health care services in the context of the choice between brand-name and generic pharmaceuticals. I examine micro-panel data from Japan, where physicians can legally make profits by prescribing and dispensing drugs. The results indicate that physicians often fail to internalize patient costs, explaining why cheaper generics are infrequently adopted. Doctors respond to markup differentials between the two versions, indicating another agency problem. However, gener...

  16. On generic representation of implicit induction procedures

    OpenAIRE

    Naidich, D.

    1996-01-01

    We develop a generic representation of implicit induction proof procedures within the cover set induction framework. Our work further develops the approach of cover set induction on propositional orderings. We show that in order to represent a substantially wide range of implicit induction procedures it is necessary to generalize the induction on formulas (propositions) to the induction on formula instances. We present a generic induction procedure which captures virtually all the existing im...

  17. Brand and generic medications: Are they interchangeable

    International Nuclear Information System (INIS)

    Generic substitution has become a common practice since the late 1970s in the United States. At that time, many of these generics caused bioavailability problems, which fueled suspicions about their efficacy and safety and the Food and Drug Administration (FDA) standards for bioequivalence. In Saudi Arabia, the increasing number of local products raised several concerns with regard to switching from brands to generics. Our objective was to review and examine the basis of the controversy surrounding brand and generic interchangeability and to explore a practical approach in pursuing a switch. Articles indexed initially under terms such as generic medications, generic substitution, bioequivalence and bioinequivalence were identified. These terms were used to search the indexing service, MEDLINE (1966-2006). References from the extracted articles and additional data sources, including the Code of Federal Regulations and Regulatory Guidelines from the FDA Center for Drug Evaluation and research were also reviewed. Foe most drugs, bioequivalence testing generally should enable clinicians to routinely substitute generic for innovator products. However, for narrow therapeutic, critical dose drugs, or for highly variable drugs, safe switching between products can not be assured. These drugs need special precautions and blood level monitoring upon switching. FDA firmly believes that approved generic and brand drugs can be dispensed with the full expectation that the consumer will receive the same clinical benefit. Performing the switch process is an advisable practice to reduce health care costs in countries with strong post-marketing surveillance program, but caution is to be exercised when narrow therapeutic index drugs or highly variable drugs are prescribed. (author)

  18. Integrating Generic Competences into Engineering Curricula

    OpenAIRE

    Pérez Martínez, Jorge Enrique; García Martín, Javier; Lías Quintero, Ana Isabel

    2014-01-01

    The new degrees in Spanish universities generated as a result of the Bologna process, stress a new dimension: the generic competencies to be acquired by university students (leadership, problem solving, respect for the environment, etc.). At Universidad Polite¿cnica de Madrid a teaching model was defined for two degrees: Graduate in Computer Engineering and Graduate in Software Engineering. Such model incorporates the training, development and assessment of generic competencies planned in the...

  19. On the genericity of spacetime singularities

    Indian Academy of Sciences (India)

    Pankaj S Joshi

    2007-07-01

    We consider here the genericity aspects of spacetime singularities that occur in cosmology and in gravitational collapse. The singularity theorems (that predict the occurrence of singularities in general relativity) allow the singularities of gravitational collapse to be either visible to external observers or covered by an event horizon of gravity. It is shown that the visible singularities that develop as final states of spherical collapse are generic. Some consequences of this fact are discussed.

  20. Historical evolution of anatomical terminology from ancient to modern.

    Science.gov (United States)

    Sakai, Tatsuo

    2007-06-01

    The historical development of anatomical terminology from the ancient to the modern can be divided into five stages. The initial stage is represented by the oldest extant anatomical treatises by Galen of Pergamon in the Roman Empire. The anatomical descriptions by Galen utilized only a limited number of anatomical terms, which were essentially colloquial words in the Greek of this period. In the second stage, Vesalius in the early 16th century described the anatomical structures in his Fabrica with the help of detailed magnificent illustrations. He coined substantially no anatomical terms, but devised a system that distinguished anatomical structures with ordinal numbers. The third stage of development in the late 16th century was marked by innovation of a large number of specific anatomical terms especially for the muscles, vessels and nerves. The main figures at this stage were Sylvius in Paris and Bauhin in Basel. In the fourth stage between Bauhin and the international anatomical terminology, many anatomical textbooks were written mainly in Latin in the 17th century, and in modern languages in the 18th and 19th centuries. Anatomical terms for the same structure were differently expressed by different authors. The last stage began at the end of the 19th century, when the first international anatomical terminology in Latin was published as Nomina anatomica. The anatomical terminology was revised repeatedly until the current Terminologia anatomica both in Latin and English. PMID:17585563

  1. Generic hypersonic vehicle performance model

    Science.gov (United States)

    Chavez, Frank R.; Schmidt, David K.

    1993-01-01

    An integrated computational model of a generic hypersonic vehicle was developed for the purpose of determining the vehicle's performance characteristics, which include the lift, drag, thrust, and moment acting on the vehicle at specified altitude, flight condition, and vehicular configuration. The lift, drag, thrust, and moment are developed for the body fixed coordinate system. These forces and moments arise from both aerodynamic and propulsive sources. SCRAMjet engine performance characteristics, such as fuel flow rate, can also be determined. The vehicle is assumed to be a lifting body with a single aerodynamic control surface. The body shape and control surface location are arbitrary and must be defined. The aerodynamics are calculated using either 2-dimensional Newtonian or modified Newtonian theory and approximate high-Mach-number Prandtl-Meyer expansion theory. Skin-friction drag was also accounted for. The skin-friction drag coefficient is a function of the freestream Mach number. The data for the skin-friction drag coefficient values were taken from NASA Technical Memorandum 102610. The modeling of the vehicle's SCRAMjet engine is based on quasi 1-dimensional gas dynamics for the engine diffuser, nozzle, and the combustor with heat addition. The engine has three variable inputs for control: the engine inlet diffuser area ratio, the total temperature rise through the combustor due to combustion of the fuel, and the engine internal expansion nozzle area ratio. The pressure distribution over the vehicle's lower aft body surface, which acts as an external nozzle, is calculated using a combination of quasi 1-dimensional gas dynamic theory and Newtonian or modified Newtonian theory. The exhaust plume shape is determined by matching the pressure inside the plume, calculated from the gas dynamic equations, with the freestream pressure, calculated from Newtonian or Modified Newtonian theory. In this manner, the pressure distribution along the vehicle after body

  2. Integrating anatomical pathology to the healthcare enterprise.

    Science.gov (United States)

    Daniel-Le Bozec, Christel; Henin, Dominique; Fabiani, Bettina; Bourquard, Karima; Ouagne, David; Degoulet, Patrice; Jaulent, Marie-Christine

    2006-01-01

    For medical decisions, healthcare professionals need that all required information is both correct and easily available. We address the issue of integrating anatomical pathology department to the healthcare enterprise. The pathology workflow from order to report, including specimen process and image acquisition was modeled. Corresponding integration profiles were addressed by expansion of the IHE (Integrating the Healthcare Enterprise) initiative. Implementation using respectively DICOM Structured Report (SR) and DICOM Slide-Coordinate Microscopy (SM) was tested. The two main integration profiles--pathology general workflow and pathology image workflow--rely on 13 transactions based on HL7 or DICOM standard. We propose a model of the case in anatomical pathology and of other information entities (orders, image folders and reports) and real-world objects (specimen, tissue samples, slides, etc). Cases representation in XML schemas, based on DICOM specification, allows producing DICOM image files and reports to be stored into a PACS (Picture Archiving and Communication System. PMID:17108550

  3. ANATOMIC RESEARCH OF SUPERIOR CLUNIAL NERVE TRAUMA

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    In order to find the mechanism of superior clunial nerve (SCN) trauma, we dissected and revealed SCN from 12 corpses (24 sides). Combining 100 sides of SCN trauma, we inspected the course of SCN, the relation between SCN and it's neighbour tissues with the situation of SCN when being subjected to force. We found that the following special anatomic characteristics and mechanical elements such as the course of SCN, it's turning angles, the bony fibrous tube at the iliac crest, the posterior layer of the lumbodorsal fascia and SCN neighbour adipose tissue, are the causes of external force inducing SCN trauma. The anatomic revealment is the guidance of SCN trauma treatment with edged needle.

  4. Anatomical basis for impotence following haemorrhoid sclerotherapy.

    OpenAIRE

    Pilkington, S. A.; Bateman, A C; Wombwell, S.; Miller, R

    2000-01-01

    Impotence has been reported as a rare but important complication of sclerotherapy for haemorrhoids. The relationship between the anterior wall of the rectum and the periprostatic parasympathetic nerves responsible for penile erection was studied to investigate a potential anatomical explanation for this therapeutic complication. A tissue block containing the anal canal, rectum and prostate was removed from each of six male cadaveric subjects. The dimensions of the components of the rectal wal...

  5. Identification of anatomical terminology in medical text.

    OpenAIRE

    Sneiderman, C. A.; Rindflesch, T. C.; Bean, C. A.

    1998-01-01

    We report on an experiment to use the natural language processing tools being developed in the SPECIALIST system to accurately identify terminology associated with the coronary arteries as expressed in coronary catheterization reports. The ultimate goal is to map from any anatomically-oriented medical text to online images, using the UMLS as an intermediate knowledge source. We describe some of the problems encountered when processing coronary artery terminology and report on the results of a...

  6. Anatomically Plausible Surface Alignment and Reconstruction

    DEFF Research Database (Denmark)

    Paulsen, Rasmus R.; Larsen, Rasmus

    2010-01-01

    With the increasing clinical use of 3D surface scanners, there is a need for accurate and reliable algorithms that can produce anatomically plausible surfaces. In this paper, a combined method for surface alignment and reconstruction is proposed. It is based on an implicit surface representation...... energy that has earlier proved to be particularly well suited for human surface scans. The method has been tested on full cranial scans of ten test subjects and on several scans of the outer human ear....

  7. Anatomic Landmarks for the First Dorsal Compartment

    OpenAIRE

    Hazani, Ron; Engineer, Nitin J.; Cooney, Damon; Wilhelmi, Bradon J.

    2009-01-01

    Objective: Knowledge of anatomic landmarks for the first dorsal compartment can assist clinicians with management of de Quervain's disease. The radial styloid, the scaphoid tubercle, and Lister's tubercle can be used as superficial landmarks for the first dorsal compartment. Methods: Thirty-two cadaveric wrists were dissected, and measurements were taken from the predetermined landmarks to the extensor retinaculum. The compartments were also inspected for variability of the abductor pollicis ...

  8. Microstructure and Anatomical Characteristics of Daemonorops margaritae

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Daemonorops margaritae is among the most important commercial rattan in South China. Its microstructure and basic anatomical characteristics as well as variation were investigated. Results show that: 1)The variation along the height is small, while the variation along the radial direction is significant; 2) The fibre length, fibre ratio and distribution density of the vascular bundles in the cross section decrease from cortex to core, while the fibre width, vessel element length and width, parenchyma ratio,...

  9. Pure endoscopic endonasal odontoidectomy: anatomical study

    OpenAIRE

    Messina, Andrea; Bruno, Maria Carmela; Decq, Philippe; Coste, Andre; Cavallo, Luigi Maria; de Divittis, Enrico; Cappabianca, Paolo; Tschabitscher, Manfred

    2007-01-01

    Different disorders may produce irreducible atlanto-axial dislocation with compression of the ventral spinal cord. Among the surgical approaches available for a such condition, the transoral resection of the odontoid process is the most often used. The aim of this anatomical study is to demonstrate the possibility of an anterior cervico-medullary decompression through an endoscopic endonasal approach. Three fresh cadaver heads were used. A modified endonasal endoscopic approach was made in al...

  10. ACCESSORY SPLEEN: A CLINICALLY RELEVANT ANATOMIC ANOMALY

    OpenAIRE

    Prachi Saffar; Amit Kumar; Ankur

    2016-01-01

    The purpose of our study is to emphasize on the clinical relevance of the presence of accessory spleen. It is not only a well-documented anatomic anomaly, it holds special significance in the differential diagnosis of intra-abdominal tumours and lymphadenopathy. MATERIALS AND METHODS Thirty male cadavers from North Indian population above the age of 60 yrs. were dissected in the Anatomy Department of FMHS, SGT University, Gurgaon, over a period of 5 yrs. (Sep 2010-Aug 2015) and presence...

  11. 42 CFR 447.506 - Authorized generic drugs.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Authorized generic drugs. 447.506 Section 447.506... (CONTINUED) MEDICAL ASSISTANCE PROGRAMS PAYMENTS FOR SERVICES Payment for Drugs § 447.506 Authorized generic drugs. (a) Authorized generic drug defined. For the purposes of this subpart, an authorized generic...

  12. Exploring brain function from anatomical connectivity

    Directory of Open Access Journals (Sweden)

    Gorka Zamora-López

    2011-06-01

    Full Text Available The intrinsic relationship between the architecture of the brain and the range of sensory and behavioral phenomena it produces is a relevant question in neuroscience. Here, we review recent knowledge gained on the architecture of the anatomical connectivity by means of complex network analysis. It has been found that corticocortical networks display a few prominent characteristics: (i modular organization, (ii abundant alternative processing paths and (iii the presence of highly connected hubs. Additionally, we present a novel classification of cortical areas of the cat according to the role they play in multisensory connectivity. All these properties represent an ideal anatomical substrate supporting rich dynamical behaviors, as-well-as facilitating the capacity of the brain to process sensory information of different modalities segregated and to integrate them towards a comprehensive perception of the real world. The result here exposed are mainly based in anatomical data of cats’ brain, but we show how further observations suggest that, from worms to humans, the nervous system of all animals might share fundamental principles of organization.

  13. Anatomical MRI with an atomic magnetometer

    CERN Document Server

    Savukov, I

    2012-01-01

    Ultra-low field (ULF) MRI is a promising method for inexpensive medical imaging with various additional advantages over conventional instruments such as low weight, low power, portability, absence of artifacts from metals, and high contrast. Anatomical ULF MRI has been successfully implemented with SQUIDs, but SQUIDs have the drawback of cryogen requirement. Atomic magnetometers have sensitivity comparable to SQUIDs and can be in principle used for ULF MRI to replace SQUIDs. Unfortunately some problems exist due to the sensitivity of atomic magnetometers to magnetic field and gradients. At low frequency, noise is also substantial and a shielded room is needed for improving sensitivity. In this paper, we show that at 85 kHz, the atomic magnetometer can be used to obtain anatomical images. This is the first demonstration of any use of atomic magnetometers for anatomical MRI. The demonstrated resolution is 1.1x1.4 mm2 in about six minutes of acquisition with SNR of 10. Some applications of the method are discuss...

  14. Anatomic variation of cranial parasympathetic ganglia

    Directory of Open Access Journals (Sweden)

    Selma Siéssere

    2008-06-01

    Full Text Available Having broad knowledge of anatomy is essential for practicing dentistry. Certain anatomical structures call for detailed studies due to their anatomical and functional importance. Nevertheless, some structures are difficult to visualize and identify due to their small volume and complicated access. Such is the case of the parasympathetic ganglia located in the cranial part of the autonomic nervous system, which include: the ciliary ganglion (located deeply in the orbit, laterally to the optic nerve, the pterygopalatine ganglion (located in the pterygopalatine fossa, the submandibular ganglion (located laterally to the hyoglossus muscle, below the lingual nerve, and the otic ganglion (located medially to the mandibular nerve, right beneath the oval foramen. The aim of this study was to present these structures in dissected anatomic specimens and perform a comparative analysis regarding location and morphology. The proximity of the ganglia and associated nerves were also analyzed, as well as the number and volume of fibers connected to them. Human heads were dissected by planes, partially removing the adjacent structures to the point we could reach the parasympathetic ganglia. With this study, we concluded that there was no significant variation regarding the location of the studied ganglia. Morphologically, our observations concur with previous classical descriptions of the parasympathetic ganglia, but we observed variations regarding the proximity of the otic ganglion to the mandibular nerve. We also observed that there were variations regarding the number and volume of fiber bundles connected to the submandibular, otic, and pterygopalatine ganglia.

  15. Combining engineering and data-driven approaches: Development of a generic fire risk model facilitating calibration

    DEFF Research Database (Denmark)

    De Sanctis, G.; Fischer, K.; Kohler, J.;

    2014-01-01

    Fire risk models support decision making for engineering problems under the consistent consideration of the associated uncertainties. Empirical approaches can be used for cost-benefit studies when enough data about the decision problem are available. But often the empirical approaches are not...... detailed enough. Engineering risk models, on the other hand, may be detailed but typically involve assumptions that may result in a biased risk assessment and make a cost-benefit study problematic. In two related papers it is shown how engineering and data-driven modeling can be combined by developing a...... generic risk model that is calibrated to observed fire loss data. Generic risk models assess the risk of buildings based on specific risk indicators and support risk assessment at a portfolio level. After an introduction to the principles of generic risk assessment, the focus of the present paper is on...

  16. Piriformis Fossa – An Anatomical and Orthopedics Consideration

    OpenAIRE

    Lakhwani, O. P.; Mittal, P.S.; D. C. Naik

    2014-01-01

    Introduction: Piriformis fossa is an important anatomical landmark having significant clinical value in orthopedic surgery; but its location and anatomical relationship with surrounding structures are not clearly defined. Hence it is necessary to clearly describe it in respect to anatomical and orthopedic aspect.

  17. Generic medicines: issues and relevance for global health.

    Science.gov (United States)

    Rana, Proteesh; Roy, Vandana

    2015-12-01

    Generic medicine is a pharmaceutical product which is bioequivalent to the innovator product in terms of dosage form, strength, route of administration, quality, safety, performance characteristics, and intended use. Generic medicines are a cornerstone for providing affordable medicines to patients. The major generic markets in the world include United States of America followed by European Union, Canada, Japan, and Australia. The major suppliers of generic medicines China and India are showing tremendous growth in the generic medicine sector. There are many legal and regulatory issues along with quality concerns associated with the use of the generic products. Lately, bilateral international agreements called free trade agreements, delaying tactics by originator companies like strategic patenting and litigations on generic manufacturers, have been a major setback for the generic medicine industry. These issues need to be addressed to optimize the use of generic medicines. The sustainability of generic medicine sector is crucial for improving access to essential medicines for the worldwide. PMID:26405851

  18. 76 FR 57767 - Proposed Generic Communication; Draft NRC Generic Letter 2011-XX: Seismic Risk Evaluations for...

    Science.gov (United States)

    2011-09-16

    ... COMMISSION Proposed Generic Communication; Draft NRC Generic Letter 2011-XX: Seismic Risk Evaluations for... appearing in the Federal Register on September 1, 2011 (76 FR 54507), that requested public comment on Draft... Register document 2011-22422, published September 1, 2011 (76 FR 54507), in the second column, under...

  19. 76 FR 69294 - Proposed Generic Communication Draft Generic Letter on Seismic Risk Evaluations for Operating...

    Science.gov (United States)

    2011-11-08

    ... COMMISSION Proposed Generic Communication Draft Generic Letter on Seismic Risk Evaluations for Operating.... SUMMARY: On September 1, 2011 (76 FR 54507), the U.S. Nuclear Regulatory Commission (NRC) published for... comment period was scheduled to expire on October, 31, 2011; however, on September 16, 2011 (76 FR...

  20. Anatomical versus Non-Anatomical Single Bundle Anterior Cruciate Ligament Reconstruction: A Cadaveric Study of Comparison of Knee Stability

    OpenAIRE

    Lim, Hong-Chul; Yoon, Yong-Cheol; Wang, Joon-Ho; Bae, Ji-Hoon

    2012-01-01

    Background The purpose of this study was to compare the initial stability of anatomical and non-anatomical single bundle anterior cruciate ligament (ACL) reconstruction and to determine which would better restore intact knee kinematics. Our hypothesis was that the initial stability of anatomical single bundle ACL reconstruction would be superior to that of non-anatomical single bundle ACL reconstruction. Methods Anterior tibial translation (ATT) and internal rotation of the tibia were measure...

  1. Design and use of numerical anatomical atlases for radiotherapy

    International Nuclear Information System (INIS)

    The main objective of this thesis is to provide radio-oncology specialists with automatic tools for delineating organs at risk of a patient undergoing a radiotherapy treatment of cerebral or head and neck tumors. To achieve this goal, we use an anatomical atlas, i.e. a representative anatomy associated to a clinical image representing it. The registration of this atlas allows us to segment automatically the patient structures and to accelerate this process. Contributions in this method are presented on three axes. First, we want to obtain a registration method which is as independent as possible from the setting of its parameters. This setting, done by the clinician, indeed needs to be minimal while guaranteeing a robust result. We therefore propose registration methods allowing a better control of the obtained transformation, using rejection techniques of inadequate matching or locally affine transformations. The second axis is dedicated to the consideration of structures associated with the presence of the tumor. These structures, not present in the atlas, indeed lead to local errors in the atlas-based segmentation. We therefore propose methods to delineate these structures and take them into account in the registration. Finally, we present the construction of an anatomical atlas of the head and neck region and its evaluation on a database of patients. We show in this part the feasibility of the use of an atlas for this region, as well as a simple method to evaluate the registration methods used to build an atlas. All this research work has been implemented in a commercial software (Imago from DOSIsoft), allowing us to validate our results in clinical conditions. (author)

  2. Towards a generic operational amplifier with dynamic reconfiguration capability

    Directory of Open Access Journals (Sweden)

    S. K. Lakshmanan

    2006-01-01

    Full Text Available Analog and analog-digital mixed signal electronics needed for sensor systems are indispensable components which tend to drifts from the normal phase of operation due to the impact of manufacturing conditions and environmental influences like etching, aging etc. Precise design methodology, trimming / calibration are essential to restore functionality of the system. Recent block level granular approaches using Field Programmable Analog Array and the more recent approaches from evolutionary electronics providing transistor level granularity using Field Programmable Transistor Arrays offers considerable extensions. In our work, we started on a new medium granular level approach called Field Programmable medium-granular Mixed-signal Array (FPMA providing basic building blocks of heterogeneous array of active and passive devices to configure established circuit structures which are adaptive, biologically inspired and dynamically re-configurable. Our design objective is to create components of clear compatibility to that of the industrial standards having predictable behavior along with the incorporation of existing design knowledge. The cells can be used in as a single instance or multiple instances. Further, we will focus on a generic dynamic reconfigurable amplifier cell with flexible topology and dimension called Generic Operational Amplifier (GOPA. The incentive of our work comes from recent development in the field of measurement and instrumentation. The digital programming of analog devices is carried out using range of algorithms from simple to evolutionary. Physical realization of the basic cells is carried out in 0.35 μm CMOS technology.

  3. A deformable generic 3D model of haptoral anchor of Monogenean.

    Directory of Open Access Journals (Sweden)

    Bee Guan Teo

    Full Text Available In this paper, a digital 3D model which allows for visualisation in three dimensions and interactive manipulation is explored as a tool to help us understand the structural morphology and elucidate the functions of morphological structures of fragile microorganisms which defy live studies. We developed a deformable generic 3D model of haptoral anchor of dactylogyridean monogeneans that can subsequently be deformed into different desired anchor shapes by using direct manipulation deformation technique. We used point primitives to construct the rectangular building blocks to develop our deformable 3D model. Point primitives are manually marked on a 2D illustration of an anchor on a Cartesian graph paper and a set of Cartesian coordinates for each point primitive is manually extracted from the graph paper. A Python script is then written in Blender to construct 3D rectangular building blocks based on the Cartesian coordinates. The rectangular building blocks are stacked on top or by the side of each other following their respective Cartesian coordinates of point primitive. More point primitives are added at the sites in the 3D model where more structural variations are likely to occur, in order to generate complex anchor structures. We used Catmull-Clark subdivision surface modifier to smoothen the surface and edge of the generic 3D model to obtain a smoother and more natural 3D shape and antialiasing option to reduce the jagged edges of the 3D model. This deformable generic 3D model can be deformed into different desired 3D anchor shapes through direct manipulation deformation technique by aligning the vertices (pilot points of the newly developed deformable generic 3D model onto the 2D illustrations of the desired shapes and moving the vertices until the desire 3D shapes are formed. In this generic 3D model all the vertices present are deployed for displacement during deformation.

  4. Generic Rigidity for Circle Diffeomorphisms with Breaks

    Science.gov (United States)

    Kocić, Saša

    2016-06-01

    We prove that {C^r}-smooth ({r > 2}) circle diffeomorphisms with a break, i.e., circle diffeomorphisms with a single singular point where the derivative has a jump discontinuity, are generically, i.e., for almost all irrational rotation numbers, not {C^{1+\\varepsilon}}-rigid, for any {\\varepsilon > 0}. This result complements our recent proof, joint with Khanin (Geom Funct Anal 24:2002-2028, 2014), that such maps are generically {C^1}-rigid. It stands in remarkable contrast to the result of Yoccoz (Ann Sci Ec Norm Sup 17:333-361, 1984) that {C^r}-smooth circle diffeomorphisms are generically {C^{r-1-κ}}-rigid, for any {κ > 0}.

  5. Generic quantum walks with memory on regular graphs

    Science.gov (United States)

    Li, Dan; Mc Gettrick, Michael; Gao, Fei; Xu, Jie; Wen, Qiao-Yan

    2016-04-01

    Quantum walks with memory (QWM) are a type of modified quantum walks that record the walker's latest path. As we know, only two kinds of QWM have been presented up to now. It is desired to design more QWM for research, so that we can explore the potential of QWM. In this work, by presenting the one-to-one correspondence between QWM on a regular graph and quantum walks without memory (QWoM) on a line digraph of the regular graph, we construct a generic model of QWM on regular graphs. This construction gives a general scheme for building all possible standard QWM on regular graphs and makes it possible to study properties of different kinds of QWM. Here, by taking the simplest example, which is QWM with one memory on the line, we analyze some properties of QWM, such as variance, occupancy rate, and localization.

  6. Knowledge Base Grid: A Generic Grid Architecture for Semantic Web

    Institute of Scientific and Technical Information of China (English)

    WU ZhaoHui(吴朝晖); CHEN HuaJun(陈华钧); XU JieFeng(徐杰锋)

    2003-01-01

    The emergence of semantic web will result in an enormous amount of knowledge base resources on the web. In this paper, a generic Knowledge Base Grid Architecture (KB-Grid)for building large-scale knowledge systems on the semantic web is presented. KB-Grid suggests a paradigm that emphasizes how to organize, discover, utilize, and manage web knowledge base resources. Four principal components are under development: a semantic browser for retrieving and browsing semantically enriched information, a knowledge server acting as the web container for knowledge, an ontology server for managing web ontologies, and a knowledge base directory server acting as the registry and catalog of KBs. Also a referential model of knowledge service and the mechanisms required for semantic communication within KB-Grid are defined. To verify the design rationale underlying the KB-Grid, an implementation of Traditional Chinese Medicine(TCM) is described.

  7. Objective evaluation of generic drug information.

    Science.gov (United States)

    Iijima, Hisashi; Kamei, Miwako; Koshimizu, Toshimasa; Shiragami, Makoto

    2004-06-01

    Pharmacists active in health care venues need to be able to evaluate generic drugs in terms of effectiveness, safety, and economy to ensure that they are used appropriately. As part of the ongoing study of these factors, we carried out an objective evaluation of information provided for generics. A minimum of 20 commercially available products was considered for each pharmaceutical ingredient. The information subjected to evaluation consisted of the text of drug package inserts and information noted on interview forms. Using our own criteria for evaluating drug information, we attempted to quantify the amounts of information provided. Then, based on the numerical values obtained, we calculated information quantities with reference to drug prices to study the relationship between prices and available information for original drugs and their later-developed, generic equivalents. A total of 14 different pharmaceutical ingredients (327 product items) were considered, with the information quantity for generics amounting to 27.9+/-17.8-46.3+/-21.4% (Mean+/-S.D.) that for the original drugs. Examined on the basis of individual pharmaceutical companies, the corresponding ratio came to 15.1+/-7.8-62.4+/-6.4% (Mean+/-S.D.). For generics, the relationship between drug price (expressed against a value of 1.0 for original drugs) and information quantity (Qua(i)) came to 0.79+/-0.46-1.90+/-0.79% (Mean+/-S.D.). These results clearly point to the importance of evaluating information quantity for generic drugs on a maker-by-maker basis. PMID:15170069

  8. Probabilistic anatomical labeling of brain structures using statistical probabilistic anatomical maps

    International Nuclear Information System (INIS)

    The use of statistical parametric mapping (SPM) program has increased for the analysis of brain PET and SPECT images. Montreal neurological institute (MNI) coordinate is used in SPM program as a standard anatomical framework. While the most researchers look up Talairach atlas to report the localization of the activations detected in SPM program, there is significant disparity between MNI templates and Talairach atlas. That disparity between Talairach and MNI coordinates makes the interpretation of SPM result time consuming, subjective and inaccurate. The purpose of this study was to develop a program to provide objective anatomical information of each x-y-z position in ICBM coordinate. Program was designed to provide the anatomical information for the given x-y-z position in MNI coordinate based on the statistical probabilistic anatomical map (SPAM) images of ICBM. When x-y-z position was given to the program, names of the anatomical structures with non-zero probability and the probabilities that the given position belongs to the structures were tabulated. The program was coded using IDL and JAVA language for the easy transplantation to any operating system or platform. Utility of this program was shown by comparing the results of this program to those of SPM program. Preliminary validation study was performed by applying this program to the analysis of PET brain activation study of human memory in which the anatomical information on the activated areas are previously known. Real time retrieval of probabilistic information with 1 mm spatial resolution was archived using the programs. Validation study showed the relevance of this program: probability that the activated area for memory belonged to hippocampal formation was more than 80%. These programs will be useful for the result interpretation of the image analysis performed on MNI coordinate, as done in SPM program

  9. TOGGLE : toolbox for generic NGS analyses

    OpenAIRE

    Monat, Cécile; Tranchant-Dubreuil, Christine; Kougbeadjo, Ayité; Farcy, Cédric; Ortega-Abboud, Enrique; Amanzougarene, Souhila; Ravel, Sébastien; Agbessi, Mawussé; Orjuela-Bouniol, Julie; Summo, Maryline; Sabot, François

    2015-01-01

    Background The explosion of NGS (Next Generation Sequencing) sequence data requires a huge effort in Bioinformatics methods and analyses. The creation of dedicated, robust and reliable pipelines able to handle dozens of samples from raw FASTQ data to relevant biological data is a time-consuming task in all projects relying on NGS. To address this, we created a generic and modular toolbox for developing such pipelines. Results TOGGLE (TOolbox for Generic nGs anaLysEs) is a suite of tools able ...

  10. TOGGLE: toolbox for generic NGS analyses

    OpenAIRE

    Monat, Cécile; Tranchant-Dubreuil, Christine; Kougbeadjo, Ayité; Farcy , Cédric; Ortega-Abboud, Enrique; Amanzougarene, Souhila; Ravel, Sébastien; Agbessi, Mawusse; Orjuela-Bouniol, Julie; Summo, Marilyne; Sabot, François

    2015-01-01

    Background: The explosion of NGS (Next Generation Sequencing) sequence data requires a huge effort in Bioinformatics methods and analyses. The creation of dedicated, robust and reliable pipelines able to handle dozens of samples from raw FASTQ data to relevant biological data is a time-consuming task in all projects relying on NGS. To address this, we created a generic and modular toolbox for developing such pipelines. Results: TOGGLE (TOolbox for Generic nGs anaLysEs) is a suite of tools abl...

  11. TOGGLE: toolbox for generic NGS analyses

    OpenAIRE

    Monat, Cécile; Tranchant-Dubreuil, Christine; Kougbeadjo, Ayité; Farcy, Cédric; Ortega-Abboud, Enrique; Amanzougarene, Souhila; Ravel, Sébastien; Agbessi, Mawusse; Orjuela-Bouniol , Julie; Summo, Marilyne; Sabot, François

    2015-01-01

    Background The explosion of NGS (Next Generation Sequencing) sequence data requires a huge effort in Bioinformatics methods and analyses. The creation of dedicated, robust and reliable pipelines able to handle dozens of samples from raw FASTQ data to relevant biological data is a time-consuming task in all projects relying on NGS. To address this, we created a generic and modular toolbox for developing such pipelines. Results TOGGLE (TOolbox for Generic nGs anaLysEs) is a suite of tools able ...

  12. A Note on Generic Fiedler Matrices

    Institute of Scientific and Technical Information of China (English)

    Liquan Zhao

    2007-01-01

    In this paper, we first show that a generic m × n Fiedler matrix may have 2 m-n-1-1 kinds of factorizations which are very complicated when m is much larger than n. In this work, two special cases are examined, one is an m × n Fiedler matrix being factored as a product of (m - n) Fiedler matrices, the other is an m × (m - 2) Fiedler matrix's factorization. Then we discuss the relation among the numbers of parameters of three generic m × n, n × p and m × p Fiedler matrices, and obtain some useful results.

  13. Generic magnetic fusion reactor cost assessment

    International Nuclear Information System (INIS)

    The Fusion Energy Division of the Oak Ridge National Laboratory discusses ''generic'' magnetic fusion reactors. The author comments on DT burning magnetic fusion reactor models being possibly operational in the 21st century. Representative parameters from D-T reactor studies are given, as well as a shematic diagram of a generic fusion reactor. Values are given for winding pack current density for existing and future superconducting coils. Topics included are the variation of the cost of electricity (COE), the dependence of the COE on the net electric power of the reactor, and COE formula definitions

  14. Ceteris Paribus Laws: Generics & Natural Kinds

    OpenAIRE

    Nickel, Bernhard

    2010-01-01

    Ceteris Paribus (cp-)laws may be said to hold only “other things equal,” signaling that their truth is compatible with a range of exceptions. This paper provides a new semantic account for some of the sentences used to state cp-laws. Its core approach is to relate these laws to natural language on the one hand — by arguing that cp-laws are most naturally expressed with generics — and to natural kinds on the other — by arguing that the semantics of generics in the context of the special scienc...

  15. Generic tacrolimus in solid organ transplantation

    DEFF Research Database (Denmark)

    Taube, D; Jones, G; O'Beirne, J;

    2014-01-01

    The availability of a wide range of immunosuppressive therapies has revolutionized the management of patients who have undergone solid organ transplantation (SOT). However, the cost of immunosuppressive drugs remains high. This situation has led to the development of generic equivalents, which are...... innovator tacrolimus drug (Prograf) in both healthy volunteers and kidney transplant patients. Clinical experience with this generic tacrolimus formulation has also been established in both de novo and conversion patients who have undergone kidney and liver transplantation, as well as in conversion of other...... SOT patients, including lung and heart recipients....

  16. TOPICAL REVIEW: Anatomical imaging for radiotherapy

    Science.gov (United States)

    Evans, Philip M.

    2008-06-01

    The goal of radiation therapy is to achieve maximal therapeutic benefit expressed in terms of a high probability of local control of disease with minimal side effects. Physically this often equates to the delivery of a high dose of radiation to the tumour or target region whilst maintaining an acceptably low dose to other tissues, particularly those adjacent to the target. Techniques such as intensity modulated radiotherapy (IMRT), stereotactic radiosurgery and computer planned brachytherapy provide the means to calculate the radiation dose delivery to achieve the desired dose distribution. Imaging is an essential tool in all state of the art planning and delivery techniques: (i) to enable planning of the desired treatment, (ii) to verify the treatment is delivered as planned and (iii) to follow-up treatment outcome to monitor that the treatment has had the desired effect. Clinical imaging techniques can be loosely classified into anatomic methods which measure the basic physical characteristics of tissue such as their density and biological imaging techniques which measure functional characteristics such as metabolism. In this review we consider anatomical imaging techniques. Biological imaging is considered in another article. Anatomical imaging is generally used for goals (i) and (ii) above. Computed tomography (CT) has been the mainstay of anatomical treatment planning for many years, enabling some delineation of soft tissue as well as radiation attenuation estimation for dose prediction. Magnetic resonance imaging is fast becoming widespread alongside CT, enabling superior soft-tissue visualization. Traditionally scanning for treatment planning has relied on the use of a single snapshot scan. Recent years have seen the development of techniques such as 4D CT and adaptive radiotherapy (ART). In 4D CT raw data are encoded with phase information and reconstructed to yield a set of scans detailing motion through the breathing, or cardiac, cycle. In ART a set of

  17. Applications of ASTEC integral code on a generic CANDU 6

    Energy Technology Data Exchange (ETDEWEB)

    Radu, Gabriela, E-mail: gabriela.radu@nuclear.ro [Institute for Nuclear Research, Campului 1, 115400 Mioveni, Arges (Romania); Prisecaru, Ilie [Power Engineering Department, University “Politehnica” of Bucharest, 313 Splaiul Independentei, Bucharest (Romania)

    2015-05-15

    Highlights: • Short overview of the models included in the ASTEC MCCI module. • MEDICIS/CPA coupled calculations for a generic CANDU6 reactor. • Two cases taking into account different pool/concrete interface models. - Abstract: In case of a hypothetical severe accident in a nuclear power plant, the corium consisting of the molten reactor core and internal structures may flow onto the concrete floor of containment building. This would cause an interaction between the molten corium and the concrete (MCCI), in which the heat transfer from the hot melt to the concrete would cause the decomposition and the ablation of the concrete. The potential hazard of this interaction is the loss of integrity of the containment building and the release of fission products into the environment due to the possibility of a concrete foundation melt-through or containment over-pressurization by the gases produced from the decomposition of the concrete or by the inflammation of combustible gases. In the safety assessment of nuclear power plants, it is necessary to know the consequences of such a phenomenon. The paper presents an example of application of the ASTECv2 code to a generic CANDU6 reactor. This concerns the thermal-hydraulic behaviour of the containment during molten core–concrete interaction in the reactor vault. The calculations were carried out with the help of the MEDICIS MCCI module and the CPA containment module of ASTEC code coupled through a specific prediction–correction method, which consists in describing the heat exchanges with the vault walls and partially absorbent gases. Moreover, the heat conduction inside the vault walls is described. Two cases are presented in this paper taking into account two different heat transfer models at the pool/concrete interface and siliceous concrete. The corium pool configuration corresponds to a homogeneous configuration with a detailed description of the upper crust.

  18. Applications of ASTEC integral code on a generic CANDU 6

    International Nuclear Information System (INIS)

    Highlights: • Short overview of the models included in the ASTEC MCCI module. • MEDICIS/CPA coupled calculations for a generic CANDU6 reactor. • Two cases taking into account different pool/concrete interface models. - Abstract: In case of a hypothetical severe accident in a nuclear power plant, the corium consisting of the molten reactor core and internal structures may flow onto the concrete floor of containment building. This would cause an interaction between the molten corium and the concrete (MCCI), in which the heat transfer from the hot melt to the concrete would cause the decomposition and the ablation of the concrete. The potential hazard of this interaction is the loss of integrity of the containment building and the release of fission products into the environment due to the possibility of a concrete foundation melt-through or containment over-pressurization by the gases produced from the decomposition of the concrete or by the inflammation of combustible gases. In the safety assessment of nuclear power plants, it is necessary to know the consequences of such a phenomenon. The paper presents an example of application of the ASTECv2 code to a generic CANDU6 reactor. This concerns the thermal-hydraulic behaviour of the containment during molten core–concrete interaction in the reactor vault. The calculations were carried out with the help of the MEDICIS MCCI module and the CPA containment module of ASTEC code coupled through a specific prediction–correction method, which consists in describing the heat exchanges with the vault walls and partially absorbent gases. Moreover, the heat conduction inside the vault walls is described. Two cases are presented in this paper taking into account two different heat transfer models at the pool/concrete interface and siliceous concrete. The corium pool configuration corresponds to a homogeneous configuration with a detailed description of the upper crust

  19. [Sigismund Laskowski and his anatomical preparations technique].

    Science.gov (United States)

    Gryglewski, Ryszard W

    2015-01-01

    Fixation of the entire bodies or individual organs, and later as well tissues and cellular structures, was and still is often a challenge for anatomists and histologists. Technique that combines extensive knowledge of natural sciences, as well as technical skills, was by those best researchers as Frederik Ruysch, brought to perfection. Preparations, if done with care and talent, are really propelling progress in anatomical studies and determining the quality of education for medical students and young physicians. And as it is true for many of today's medical disciplines and natural sciences, the nineteenth century was in many ways a breaking point for preparatory techniques in the realm of anatomy and histology. Among those who have achieved success, earning notoriety during their lifetime and often going into the annals of European most distinguished scholars were some Polish names: Louis Maurice Hirschfeld, whose preparations of the nervous system earned him well-deserved, international fame, Louis Charles Teichmann, who was the very first so precisely describing the lymphatic system and a creator of unique injection mass, Henry Kadyi, known for his outstanding preparations, especially of vascular system. Henry Frederick Hoyer sen., who was one of the first to use formalin regularly for accurate microscopic preparations, is seen by many as the founder of the Polish histology. In this group of innovators and precursors of modern preparation techniques place should be reserved for Zygmunt (Sigismund) Laskowski, Polish patriot, fighting in January Uprising, later an immigrant, a professor at the university sequentially Paris and Geneva. Acclaimed author of anatomical tables and certainly creator of one of the groundbreaking techniques in anatomical preparations. Based after many years of research on the simple glycerine-phenol mixture achieved excellent results both in fixation of entire bodies and organs or tissues. Quality of those preparations was as high and

  20. Constitutional and Anatomical Characteristics of Mature Women

    Institute of Scientific and Technical Information of China (English)

    Vladimir NNikolenko; DmitryBNikityuk; SvetlanaVKlochkova; AnastasiaABahmet

    2015-01-01

    Objective To identify the constitutional and anatomical peculiarities of constitution of women of mature age.Methods There was completed comprehensive anthropometric and bio-electrical survey of 651 mature women ( relative norm) living in the Moscow region .Results The quantitative distribution of women by somatotypological affiliation was revealed;anthropometric and body component composition in representatives of different somatotypes were defined .Conclusion Thus, the performed study revealed and quantiely character-ised the distribution of women according to their constitutional types in the studied population of mature age women living in Moscow region under the relative norm conditions .

  1. A Generic Framework for the Engineering of Self-Adaptive and Self-Organising Systems

    OpenAIRE

    Di Marzo Serugendo, Giovanna; FitzGerald, John; Romanovsky, Alexander; Guelfi, Nicolas

    2008-01-01

    This paper provides a unifying view for the engineering of self-adaptive (SA) and self-organising (SO) systems. We first identify requirements for designing and building trustworthy self-adaptive and self-organising systems. Second, we propose a generic framework combining design-time and run-time features, which permit the definition and analysis at design-time of mechanisms that both ensure and constrain the run-time behaviour of an SA or SO system,...

  2. Modeling multi-clocked data-flow programs using the Generic Modeling Environment

    OpenAIRE

    Brunette, Christian; Talpin, Jean-Pierre; Besnard, Loïc; Gautier, Thierry

    2006-01-01

    This paper presents Signal-Meta, the metamodel designed for the synchronous data-flow language Signal. It relies on the Generic Modeling Environment (GME), a configurable object-oriented toolkit that supports the creation of domain-specific modeling and program synthesis environments. The graphical description constitutes the base to build multi-clock environments, and a good front-end for the Polychrony platform. To complete this frontend, we develop a tool that transforms the graphical Sign...

  3. Anatomic Optical Coherence Tomography of Upper Airways

    Science.gov (United States)

    Chin Loy, Anthony; Jing, Joseph; Zhang, Jun; Wang, Yong; Elghobashi, Said; Chen, Zhongping; Wong, Brian J. F.

    The upper airway is a complex and intricate system responsible for respiration, phonation, and deglutition. Obstruction of the upper airways afflicts an estimated 12-18 million Americans. Pharyngeal size and shape are important factors in the pathogenesis of airway obstructions. In addition, nocturnal loss in pharyngeal muscular tone combined with high pharyngeal resistance can lead to collapse of the airway and periodic partial or complete upper airway obstruction. Anatomical optical coherence tomography (OCT) has the potential to provide high-speed three-dimensional tomographic images of the airway lumen without the use of ionizing radiation. In this chapter we describe the methods behind endoscopic OCT imaging and processing to generate full three dimensional anatomical models of the human airway which can be used in conjunction with numerical simulation methods to assess areas of airway obstruction. Combining this structural information with flow dynamic simulations, we can better estimate the site and causes of airway obstruction and better select and design surgery for patients with obstructive sleep apnea.

  4. [Generic drugs in psychopharmacology: pros and cons].

    Science.gov (United States)

    Cuenca, E; Zaragozá, F

    1999-01-01

    Legislation to facilitate process for generic products has been enacted and generic drugs have entered the market soon after the patent for the brand-name agent have expired. In every instance, the rationale has been economic since it is generally assumed that the copies are not only therapeutically equivalent but also a great deal less expensive than the original. Sometimes this may be so. In this short review several comments are made in order to establish the variables that may influence bioequivalence between the brand-name drug and its generics. Among them emphasis is given to the particle sizes, pharmaceutical supply, choice of the right excipient, in order to avoid possible interactions with the drug, ingredient quality and purity, etc. All these variables must be carefully controlled. Even so a patient who is changed from a trade name product to a generic drug (or vice versa) may respond a little differently, which is important in Psychopharmacology. Two or more products should be considered biologically equivalent only when it can demonstrated that they fulfil three conditions: that they have the same pharmaceutical properties; that they are equally effective in therapeutic use and that they are tolerated equally by patients being treated for the indicated uses. Regulatory agencies could require subsequent versions of an original therapeutic product the type of data regarding pharmacology, toxicology and chemical assessment that was mandatory for the introduction of the original. PMID:10611558

  5. Towards One Generic Name for Monophyletic Lineages

    Science.gov (United States)

    With the integration of asexually reproducing fungi into meaningful phylogenies, the need to use the same generic name for a monophyletic lineage has become urgent. At present Article 59 of the International Code of Botanical Nomenclature (ICBN) requires the use of a sexual state name for sexually r...

  6. Towards Generic Interaction Styles for Product Design

    DEFF Research Database (Denmark)

    Buur, Jacob; Stienstra, Marcelle

    2008-01-01

    a wider range of interactive products. In this paper we report on five years of continued research into interaction styles for telephones, kitchen equipment, HiFi products and medical devices, and we show how it is indeed possible and beneficial to formulate a set of generic interaction styles....

  7. Generic Large Cardinals and Systems of Filters

    OpenAIRE

    Audrito, Giorgio; Steila, Silvia

    2015-01-01

    We introduce the notion of $\\mathcal{C}$-system of filters, generalizing the standard definitions of both extenders and towers of normal ideals. This provides a framework to develop the theory of extenders and towers in a more general and concise way. In this framework we investigate the topic of definability of generic large cardinals properties.

  8. Crystallization Kinetics within a Generic Modeling Framework

    DEFF Research Database (Denmark)

    Meisler, Kresten Troelstrup; von Solms, Nicolas; Gernaey, Krist V.;

    2014-01-01

    A new and extended version of a generic modeling framework for analysis and design of crystallization operations is presented. The new features of this framework are described, with focus on development, implementation, identification, and analysis of crystallization kinetic models. Issues relate...

  9. Crystallization Kinetics within a Generic Modelling Framework

    DEFF Research Database (Denmark)

    Meisler, Kresten Troelstrup; von Solms, Nicolas; Gernaey, Krist; Gani, Rafiqul

    An existing generic modelling framework has been expanded with tools for kinetic model analysis. The analysis of kinetics is carried out within the framework where kinetic constitutive models are collected, analysed and utilized for the simulation of crystallization operations. A modelling...... procedure is proposed to gain the information of crystallization operation kinetic model analysis and utilize this for faster evaluation of crystallization operations....

  10. Cerebral functional connectivity periodically (de)synchronizes with anatomical constraints.

    Science.gov (United States)

    Liégeois, Raphaël; Ziegler, Erik; Phillips, Christophe; Geurts, Pierre; Gómez, Francisco; Bahri, Mohamed Ali; Yeo, B T Thomas; Soddu, Andrea; Vanhaudenhuyse, Audrey; Laureys, Steven; Sepulchre, Rodolphe

    2016-07-01

    This paper studies the link between resting-state functional connectivity (FC), measured by the correlations of fMRI BOLD time courses, and structural connectivity (SC), estimated through fiber tractography. Instead of a static analysis based on the correlation between SC and FC averaged over the entire fMRI time series, we propose a dynamic analysis, based on the time evolution of the correlation between SC and a suitably windowed FC. Assessing the statistical significance of the time series against random phase permutations, our data show a pronounced peak of significance for time window widths around 20-30 TR (40-60 s). Using the appropriate window width, we show that FC patterns oscillate between phases of high modularity, primarily shaped by anatomy, and phases of low modularity, primarily shaped by inter-network connectivity. Building upon recent results in dynamic FC, this emphasizes the potential role of SC as a transitory architecture between different highly connected resting-state FC patterns. Finally, we show that the regions contributing the most to these whole-brain level fluctuations of FC on the supporting anatomical architecture belong to the default mode and the executive control networks suggesting that they could be capturing consciousness-related processes such as mind wandering. PMID:26197763

  11. 76 FR 76738 - Generic Drug User Fee; Public Meeting

    Science.gov (United States)

    2011-12-08

    ... generic active pharmaceutical ingredient (API) and generic finished dosage form (FDF) manufacturers with... drug user fee revenue, 80 percent would be provided by the FDF manufacturers and 20 percent by API... test your connection by going to:...

  12. Nomina anatomica. Anatomic terminology and the old French terminology.

    Science.gov (United States)

    Chiapas-Gasca, Karla; Passos, Luiz Fernando De Souza; Euzébio Ribeiro, Sandra Lúcia; Villaseñor-Ovies, Pablo

    A surprising finding in our seminars in Latin America and Spain was that approximately half of the participants continued to use the old French anatomical nomenclature. The substance of this paper is a table in which we compare the anatomical names for the items reviewed in our seminar, in a Spanish version of the old French nomenclature and in the Spanish, Portuguese, and English versions of the currently employed anatomical terms. PMID:23228528

  13. Building low-cost music controllers

    OpenAIRE

    2006-01-01

    This paper presents our work on building low-cost music controllers intended for educational and creative use. The main idea was to build an electronic music controller, including sensors and a sensor interface, on a "10 euro" budget. We have experimented with turning commercially available USB game controllers into generic sensor interfaces, and making sensors from cheap conductive materials such as latex, ink, porous materials, and video tape. Our prototype controller, the CheapStick, is co...

  14. Normal anatomical measurements in cervical computerized tomography

    International Nuclear Information System (INIS)

    Radiodiagnostically relevant normal values and variations for measurements of the cervical region, the arithmetical average and the standard deviation were determined from adequate computer tomograms on 60 healthy women and men, aged 20 to 83 years. The sagittal diameter of the prevertebral soft tissue and the lumina of the upper respiratory tract were evaluated at exactly defined levels between the hyoid bone and the incisura jugularis sterni. - The thickness of the aryepiglottic folds, the maximal sagittal and transverse diameters of the thyroid gland and the calibre of the great cervical vessels were defined. - To assess information about laryngeal function in computerized tomography, measurements of distances between the cervical spine and anatomical fixed points of the larynx and hypopharynx were made as well as of the degree of vocal cord movement during normal respiration and phonation. (orig.)

  15. [Antique anatomical collections for contemporary museums].

    Science.gov (United States)

    Nesi, Gabriella; Santi, Raffaella

    2013-01-01

    Anatomy and Pathology Museum collections display a great biological value and offer unique samples for research purposes. Pathological specimens may be investigated by means of modern radiological and molecular biology techniques in order to provide the etiological background of disease, with relevance to present-day knowledge. Meanwhile, historical resources provide epidemiologic data regarding the socio-economic conditions of the resident populations, the more frequently encountered illnesses and dietary habits. These multidisciplinary approaches lead to more accurate diagnoses also allowing new strategies in cataloguing and musealization of anatomical specimens. Further, once these data are gathered, they may constitute the basis of riedited Museum catalogues feasible to be digitalized and displayed via the Web. PMID:25807710

  16. Normal anatomical measurements in cervical computerized tomography

    Energy Technology Data Exchange (ETDEWEB)

    Zaunbauer, W.; Daepp, S.; Haertel, M.

    1985-11-01

    Radiodiagnostically relevant normal values and variations for measurements of the cervical region, the arithmetical average and the standard deviation were determined from adequate computer tomograms on 60 healthy women and men, aged 20 to 83 years. The sagittal diameter of the prevertebral soft tissue and the lumina of the upper respiratory tract were evaluated at exactly defined levels between the hyoid bone and the incisura jugularis sterni. - The thickness of the aryepiglottic folds, the maximal sagittal and transverse diameters of the thyroid gland and the calibre of the great cervical vessels were defined. - To assess information about laryngeal function in computerized tomography, measurements of distances between the cervical spine and anatomical fixed points of the larynx and hypopharynx were made as well as of the degree of vocal cord movement during normal respiration and phonation.

  17. Anatomic correlations in radiogallium imaging of the peritoneum and retroperitoneum

    International Nuclear Information System (INIS)

    Radiogallium (67Ga) imaging of the abdomen and pelvis has been useful not only in detecting inflammations in these regions, but in pointing out their precise anatomic localization. Once the anatomic site is determined, it is often possible to infer the source of origin of the problem (such as ruptured viscus or pancreatitis). Interpretation of the images depends on recognition of patterns that define known anatomic boundaries such as the transverse mesocolon, root of the small mesentery, perirenal space, and pararenal space, or else show diffuse peritoneal uptake. The anatomic patterns may have continued usefulness in future studies, such as when radiolabeled leukocytes are employed to localize inflammations

  18. Using Service Oriented Architecture in a Generic Virtual Power Plant

    DEFF Research Database (Denmark)

    Andersen, Peter Bach; Poulsen, Bjarne; Træholt, Chresten;

    2009-01-01

    The purpose of this paper is to find and describe a suitable software framework that can be used to help implement the concept of a Generic Virtual Power Plant in the future power system. The Generic Virtual Power Plant concept, along with the utilization of distributed energy resources, has many...... the Generic Virtual Power Plant, an array of different software design principles, patterns and architectures must be applied. Especially Service Oriented Architecture (SOA) can aid in implementing the Generic Virtual Power Plant....

  19. State generic substitution laws can lower drug outlays under medicaid

    OpenAIRE

    Shrank, William H.; Choudhry, Niteesh K.; Agnew-Blais, Jessica; Federman, Alex D.; Liberman, Joshua N.; LIU Jun; Aaron S Kesselheim; Brookhart, M. Alan; Fischer, Michael A

    2010-01-01

    To stem the rising costs of medications, states have implemented varying generic substitution policies. These policies differ in the extent to which pharmacists or patients can influence medication choice. Using national Medicaid data, we evaluated the relationship between different generic substitution policies and generic simvastatin use after patent expiration of branded Zocor. States implementing policies that require patient consent prior to generic substitution experienced 25% lower rat...

  20. What does a generic Markov operator look like

    OpenAIRE

    Vershik, A.

    2005-01-01

    We consider generic i.e., forming an everywhere dense massive subset classes of Markov operators in the space $L^2(X,\\mu)$ with a finite continuous measure. Since there is a canonical correspondence that associates with each Markov operator a multivalued measure-preserving transformation (i.e., a polymorphism), as well as a stationary Markov chain, we can also speak about generic polymorphisms and generic Markov chains. The most important and inexpected generic properties of Markov operators ...

  1. MRI anatomical variants of mammillary bodies.

    Science.gov (United States)

    Tagliamonte, Micaela; Sestieri, Carlo; Romani, Gian Luca; Gallucci, Massimo; Caulo, Massimo

    2015-01-01

    The mammillary bodies (MBs) are classically defined as a pair of small round structures located on the undersurface of the diencephalon. The systematic observation of MR brain images of patients with neurological diseases, but also of healthy subjects enrolled in research protocols, reveals, however, a greater anatomical variability. The aim of the present study was to define the spectrum of such variability using spatial normalized 3D TFE T1-weighted MR images in a group of 151 healthy right-handed young subjects (78 females, age range 16-39 years). The MBs were identified on reformatted coronal and axial images and classified according to morphological, positional and numerical criteria. On the basis of coronal images, MBs were first divided into symmetrical (86.1 %) and asymmetrical (13.9 %), depending on their respective height. Symmetrical MBs were further subdivided into three variants [type A (2.7 %), B (76.2 %), C (7.3 %)] according to the depth of the intermammillary sulcus. Two morphological variants were defined on axial images, depending on whether the MBs were circular (63.6 %) or elliptic (36.4 %). This latter group was further divided in two subgroups, depending on whether the MBs were parallel (21.9 %) or convergent (14.6 %). Finally, two subjects (1.3 %) presented a supernumeral MB. The transverse size of the third ventricle was greater in the type A compared to the type B and C groups. Gender did not significantly affect the frequency of MBs variants, except for the three symmetrical subgroups in which the variants A and C were more frequent in males than in females. These findings suggest the presence of an anatomical variability of the MBs, in contrast to their classical definition. Therefore, atypical presentation of MBs can be the expression of this variability rather than a marker of neurological disorders (i.e. cerebral malformation, mesial temporal sclerosis, Wernicke-Korsakoff syndrome). PMID:24072163

  2. 40 CFR 721.10053 - Alkyl silane methacrylate (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkyl silane methacrylate (generic... Specific Chemical Substances § 721.10053 Alkyl silane methacrylate (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as alkyl...

  3. 40 CFR 721.10163 - Chloro fluoro alkane (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Chloro fluoro alkane (generic). 721... Substances § 721.10163 Chloro fluoro alkane (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as chloro fluoro alkane (PMN...

  4. Professional Teaching Standards: Generic, Subject-Specific or Third Wave?

    Science.gov (United States)

    Chadbourne, Rod

    2001-01-01

    Explores the issue of generic versus subject-specific standards in terms of their role in teachers' professional development. Suggests generic and subject-specific standards share a symbiotic relationship. Outlines a basis for a "third wave": some teachers may find at a particular stage in their career that generic standards are more useful than…

  5. 40 CFR 721.5905 - Modified phenolic resin (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Modified phenolic resin (generic). 721... Substances § 721.5905 Modified phenolic resin (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as a modified phenolic resin...

  6. 40 CFR 721.5908 - Modified phenolic resin (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Modified phenolic resin (generic). 721... Substances § 721.5908 Modified phenolic resin (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as modified phenolic resin (PMN...

  7. Defining and Comparing Generic Competences in Higher Education

    Science.gov (United States)

    Kallioinen, Outi

    2010-01-01

    In this article the author discusses the importance of defining generic competences in alignment with the European definitions. As a case study the generic competences defined by Laurea University of Applied Sciences are compared with European definitions of generic competences. The purpose is to open up the various perspectives within this…

  8. 40 CFR 721.9719 - Tris carbamoyl triazine (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Tris carbamoyl triazine (generic). 721... Substances § 721.9719 Tris carbamoyl triazine (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as tris carbamoyl triazine (PMN...

  9. 40 CFR 721.9959 - Polyurethane polymer (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Polyurethane polymer (generic). 721... Substances § 721.9959 Polyurethane polymer (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as a polyurethane polymer (PMN...

  10. 40 CFR 721.324 - Alkoxylated acrylate polymer (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkoxylated acrylate polymer (generic... Substances § 721.324 Alkoxylated acrylate polymer (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as alkoxylated acrylate...

  11. 40 CFR 721.6005 - Rare earth phosphate (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Rare earth phosphate (generic). 721... Substances § 721.6005 Rare earth phosphate (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substances identified generically as rare earth phophate (PMNs...

  12. 40 CFR 721.10128 - Modified imidazole (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Modified imidazole (generic). 721... Substances § 721.10128 Modified imidazole (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as modified imidazole (PMN...

  13. 40 CFR 721.5546 - Halogen substituted oxetanes (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Halogen substituted oxetanes (generic... Substances § 721.5546 Halogen substituted oxetanes (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substances identified generically as halogen substituted...

  14. 40 CFR 721.2673 - Aromatic epoxide resin (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Aromatic epoxide resin (generic). 721... Substances § 721.2673 Aromatic epoxide resin (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as aromatic epoxide resin (PMN...

  15. 40 CFR 721.2685 - Polyisobutene epoxide (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Polyisobutene epoxide (generic). 721... Substances § 721.2685 Polyisobutene epoxide (generic). (a) Chemical substances and significant new uses subject to reporting. (1) The chemical substances identified generically as polyisobutene epoxide (PMNs...

  16. 40 CFR 721.2675 - Perfluoroalkyl epoxide (generic name).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Perfluoroalkyl epoxide (generic name... Substances § 721.2675 Perfluoroalkyl epoxide (generic name). (a) Chemical substances and significant new uses subject to reporting. (1) The chemical substance identified generically as perfluoroalkyl epoxide (PMN...

  17. 40 CFR 721.5917 - Phenyl azo dye (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Phenyl azo dye (generic). 721.5917... Substances § 721.5917 Phenyl azo dye (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as a phenyl azo dye (PMN P-02-17) is subject...

  18. The Doppler peaks from a generic defect

    CERN Document Server

    Magueijo, J

    1996-01-01

    We investigate which of the exotic Doppler peak features found for textures and cosmic strings are generic novelties pertaining to defects. We find that the ``out of phase'' texture signature is an accident. Generic defects, when they generate a secondary peak structure similar to inflation, apply to it an additive shift. It is not necessary for this shift to be ``out of phase''. We also show which factors are responsible for the absence of secondary oscillations found for cosmic strings. Within this general analysis we finally consider the conditions under which topological defects and inflation can be confused. It is argued that only \\Omega=1 inflation and a defect with a horizon size coherence length have a chance to be confused. Any other inflationary or defect model always differ distinctly. (To appear in the proceedings of the XXXIth Moriond meeting, ``Microwave Background Anisotropies'')

  19. Generic Stellarator-like Magnetic Fusion Reactor

    Science.gov (United States)

    Sheffield, John; Spong, Donald

    2015-11-01

    The Generic Magnetic Fusion Reactor paper, published in 1985, has been updated, reflecting the improved science and technology base in the magnetic fusion program. Key changes beyond inflation are driven by important benchmark numbers for technologies and costs from ITER construction, and the use of a more conservative neutron wall flux and fluence in modern fusion reactor designs. In this paper the generic approach is applied to a catalyzed D-D stellarator-like reactor. It is shown that an interesting power plant might be possible if the following parameters could be achieved for a reference reactor: R/ ~ 4 , confinement factor, fren = 0.9-1.15, ~ 8 . 0 -11.5 %, Zeff ~ 1.45 plus a relativistic temperature correction, fraction of fast ions lost ~ 0.07, Bm ~ 14-16 T, and R ~ 18-24 m. J. Sheffield was supported under ORNL subcontract 4000088999 with the University of Tennessee.

  20. An Internet of Things Generic Reference Architecture

    DEFF Research Database (Denmark)

    Bhalerao, Dipashree M.; Riaz, Tahir; Madsen, Ole Brun;

    2013-01-01

    , and keeping track of all these things for monitoring and controlling some information. IoT architecture is studied from software architecture, overall system architecture and network architecture point of view. Paper puts forward the requirements of software architecture along with, its component...... and deployment diagram, process and interface diagram at abstract level. Paper proposes the abstract generic IoT reference and concrete abstract generic IoT reference architectures. Network architecture is also put up as a state of the art. Paper shortly gives overviews of protocols used for IoT. Some......Internet of things Network is a future application of Internet. This network has three major basic blocks as business process or Application, core network or internetwork and peripheral network as Things or objects. The assembly has the basic intention of connecting all physical and virtual things...

  1. [The patents game. Generic and biosimilar drugs].

    Science.gov (United States)

    Villamañán, E; González, D; Armada, E; Ruano, M; Álvarez-Sala, R; Herrero, A

    2016-01-01

    The protection provided by patents on medicines has a limited duration. The expiry of patents expiration allows copies of the drugs to be released, competing with original. At first, they were identical to the original, known as generic drugs, but in recent years, due to the marketing of biological therapies and the expiry of many of their patents, biosimilar drugs have also emerged. These are not exact copies of the original, but, like generic drugs, biosimilar drugs have to demonstrate equivalence to the reference drugs in quality, safety and efficacy. Nevertheless, despite their importance and contribution to sustainability of health system, doctors are sometimes unaware of differences between them, and their impact in terms of clinical and economic effects. An attempt is made to review and clarify certain aspects often unknown by physicians, despite their involvement in their use. PMID:26542789

  2. Savannah River Site generic data base development

    International Nuclear Information System (INIS)

    This report describes the results of a project to improve the generic component failure database for the Savannah River Site (SRS). Additionally, guidelines were developed further for more advanced applications of database values. A representative list of components and failure modes for SRS risk models was generated by reviewing existing safety analyses and component failure data bases and from suggestions from SRS safety analysts. Then sources of data or failure rate estimates were identified and reviewed for applicability. A major source of information was the Nuclear Computerized Library for Assessing Reactor Reliability, or NUCLARR. This source includes an extensive collection of failure data and failure rate estimates for commercial nuclear power plants. A recent Idaho National Engineering Laboratory report on failure data from the Idaho Chemical Processing Plant was also reviewed. From these and other recent sources, failure data and failure rate estimates were collected for the components and failure modes of interest. For each component failure mode, this information was aggregated to obtain a recommended generic failure rate distribution (mean and error factor based on a lognormal distribution). Results are presented in a table in this report. A major difference between generic database and previous efforts is that this effort estimates failure rates based on actual data (failure events) rather than on existing failure rate estimates. This effort was successful in that over 75% of the results are now based on actual data. Also included is a section on guidelines for more advanced applications of failure rate data. This report describes the results of a project to improve the generic component failure database for the Savannah River site (SRS). Additionally, guidelines were developed further for more advanced applications of database values

  3. Generic Skills from Qur'anic Perspective

    OpenAIRE

    Siddig Ahmad

    2012-01-01

    Generic skills are defined as a set of skills that are directly related and needed for the working environment. Employers prefer to recruit officials who are competent in interpersonal communication, leadership skill, team work, oral and written skills. They are reluctant to employ graduates lacking certain necessary skills. This reveals the fact that there is a serious gap between the skills that are required by the employers and the skills that the graduates possess. Therefore, this researc...

  4. Superstrings in a generic supersymmetric curved space

    International Nuclear Information System (INIS)

    Supersymmetry (off-shell) is necessary and sufficient for the preservation of the value of the critical dimension and the cancellation of anomalies when the superstring is embedded in a generic curved space. This is achieved by embedding the doubly-covered general linear (spinorial curved space) group anti GL(10,R) in anti GQ(10,R), a non-simple real form derived from the exponentiation of the hyperexceptional superalgebra q(10)

  5. Energy in Generic Higher Curvature Gravity Theories

    OpenAIRE

    Deser, S.; Tekin, Bayram

    2002-01-01

    We define and compute the energy of higher curvature gravity theories in arbitrary dimensions. Generically, these theories admit constant curvature vacua (even in the absence of an explicit cosmological constant), and asymptotically constant curvature solutions with non-trivial energy properties. For concreteness, we study quadratic curvature models in detail. Among them, the one whose action is the square of the traceless Ricci tensor always has zero energy, unlike conformal (Weyl) gravity. ...

  6. A Generic Multivariate Distribution for Counting Data

    OpenAIRE

    Capistrán, Marcos; Christen, J. Andrés

    2011-01-01

    Motivated by the need, in some Bayesian likelihood free inference problems, of imputing a multivariate counting distribution based on its vector of means and variance-covariance matrix, we define a generic multivariate discrete distribution. Based on blending the Binomial, Poisson and Negative-Binomial distributions, and using a normal multivariate copula, the required distribution is defined. This distribution tends to the Multivariate Normal for large counts and has an approximate pmf versi...

  7. Generic Sandpile Models Have Directed Percolation Exponents

    OpenAIRE

    P. K. Mohanty; Dhar, Deepak

    2002-01-01

    We study sandpile models with stochastic toppling rules and having sticky grains so that with a non-zero probability no toppling occurs, even if the local height of pile exceeds the threshold value. Dissipation is introduced by adding a small probability of particle loss at each toppling. Generically, for models with a preferred direction, the avalanche exponents are those of critical directed percolation clusters. For undirected models, avalanche exponents are those of directed percolation c...

  8. Generic Superweak Chaos Induced by Hall Effect

    OpenAIRE

    Ben-Harush, Moti; Dana, Itzhack

    2016-01-01

    We introduce and study the "kicked Hall system" (KHS), i.e., charged particles periodically kicked in the presence of uniform magnetic ($\\mathbf{B}$) and electric ($\\mathbf{E}$) fields that are perpendicular to each other and to the kicking direction. We show that for resonant values of $B$ and $E$ and in the weak-chaos regime of sufficiently small nonintegrability parameter $\\kappa$ (the kicking strength), there exists a \\emph{generic} family of periodic kicking potentials for which the Hall...

  9. Savannah River Site generic data base development

    Energy Technology Data Exchange (ETDEWEB)

    Blanchard , A.

    2000-01-04

    This report describes the results of a project to improve the generic component failure database for the Savannah River Site (SRS). Additionally, guidelines were developed further for more advanced applications of database values. A representative list of components and failure modes for SRS risk models was generated by reviewing existing safety analyses and component failure data bases and from suggestions from SRS safety analysts. Then sources of data or failure rate estimates were identified and reviewed for applicability. A major source of information was the Nuclear Computerized Library for Assessing Reactor Reliability, or NUCLARR. This source includes an extensive collection of failure data and failure rate estimates for commercial nuclear power plants. A recent Idaho National Engineering Laboratory report on failure data from the Idaho Chemical Processing Plant was also reviewed. From these and other recent sources, failure data and failure rate estimates were collected for the components and failure modes of interest. For each component failure mode, this information was aggregated to obtain a recommended generic failure rate distribution (mean and error factor based on a lognormal distribution). Results are presented in a table in this report. A major difference between generic database and previous efforts is that this effort estimates failure rates based on actual data (failure events) rather than on existing failure rate estimates. This effort was successful in that over 75% of the results are now based on actual data. Also included is a section on guidelines for more advanced applications of failure rate data. This report describes the results of a project to improve the generic component failure database for the Savannah River site (SRS). Additionally, guidelines were developed further for more advanced applications of database values.

  10. Generic design of Chinese remaindering schemes

    OpenAIRE

    Dumas, Jean-Guillaume; Gautier, Thierry; Roch, Jean-Louis

    2010-01-01

    We propose a generic design for Chinese remainder algorithms. A Chinese remainder computation consists in reconstructing an integer value from its residues modulo non coprime integers. We also propose an efficient linear data structure, a radix ladder, for the intermediate storage and computations. Our design is structured into three main modules: a black box residue computation in charge of computing each residue; a Chinese remaindering controller in charge of launching the computation and o...

  11. The generic applications and monitors environment.

    Science.gov (United States)

    Teuber, D.

    Astrophysics from large, heterogeneous and distributed databases encounters the problems of homogenizing the input data and storing the results in a well defined way using a database system. The evaluation of millions of objects contained in the database requires the introduction of an expert system. To meet the requirements arising from both premises a support system named Generic Applications and Monitors Environment (GAME) was created. Its properties are parametrized and GAME itself is organized like a database system.

  12. Radionuclide sorption on generic rock types

    International Nuclear Information System (INIS)

    A study has been carried out of the sorption of the elements chlorine, nickel, selenium, iodine, lead, uranium and neptunium onto generic rock types. These elements all have isotopes that might be of radiological significance in the disposal of low and intermediate level wastes. The investigation has included preliminary work on the effects on sorption of near-field derived materials such as organic degradation products and high calcium and hydroxyl ion concentrations. (author)

  13. Generic drugs: myths, facts, and limitations

    OpenAIRE

    Antonio Marzo; Elisabetta Porro; Anna Barassi

    2012-01-01

    Bioequivalence (BE) has always been an important pharmaceutical area, particularly (but not solely) in Mediterranean region, where the use of generic drugs is a relatively recent development. The lack of new therapeutic molecules has concentrated primary research in the hands of a few large pharmaceutical companies. For smaller companies, this has created opportunities for the development of new formulations of existing drugs (orodispersible tablets that dissolve in the mouth, extended-releas...

  14. Generic control of material handling systems

    OpenAIRE

    Haneyah, S.W.A.

    2013-01-01

    Material handling systems (MHSs) are in general complex installations that raise challenging design and control problems. In the literature, design and control problems have received a lot of attention within distinct business sectors or systems, but primarily from a system’s user perspective. Much less attention is paid to generic (i.e., sector independent) control architectures and modeling approaches across these various sectors, which is in the first place interesting for MHS suppliers. I...

  15. Sweep as a Generic Pruning Technique

    OpenAIRE

    Beldiceanu, Nicolas

    2000-01-01

    This report presents a generic pruning technique that aggregates several constraints sharing some variables. The method is derived from an idea called sweep that is extensively used in computational geometry. A first benefit of this technique comes from the fact that it can be applied on several families of global constraints. A second main advantage is that it does not lead to any memory consumption problem since it only requires temporary memory that can be reclaimed after each invocation o...

  16. Generic process algebra : a programming challenge

    OpenAIRE

    Barbosa, L. S.; Barbosa, Marco António; Ribeiro, Paula R.

    2006-01-01

    Emerging interaction paradigms, such as service-oriented computing, and new technological challenges, such as exogenous component coordination, suggest new roles and application areas for process algebras. This, however, entails the need for more generic and adaptable approaches to their design. For example, some applications may require similar programming constructs coexisting with different interaction disciplines. In such a context, this paper pursues a research programme on a coinductive...

  17. Generic Architecture for Mobile Check System

    OpenAIRE

    KARIMA MAAZOUZ; HABIB.BENLAHMER; NACEUR.ACHTAICH

    2013-01-01

    the explosion of the market of Smartphone has rapidly changed the way of m-commerce transactions, especially the m-payment systems which are knowing a wide acceptance due to their diversity and the new mobile technologies. In this work we have introduced the system m-check as a mobile payment system, we have presented a generic architecture of the system and the different protocols for the implementation of the system m-check

  18. Generic Architecture for Mobile Check System

    Directory of Open Access Journals (Sweden)

    KARIMA MAAZOUZ

    2013-11-01

    Full Text Available the explosion of the market of Smartphone has rapidly changed the way of m-commerce transactions, especially the m-payment systems which are knowing a wide acceptance due to their diversity and the new mobile technologies. In this work we have introduced the system m-check as a mobile payment system, we have presented a generic architecture of the system and the different protocols for the implementation of the system m-check

  19. Generic strange duality for $K3$ surfaces

    OpenAIRE

    Marian, Alina; Oprea, Dragos

    2013-01-01

    Strange duality is shown to hold over generic $K3$ surfaces in a large number of cases. The isomorphism for elliptic $K3$ surfaces is established first via Fourier–Mukai techniques. Applications to Brill–Noether theory for sheaves on $K3$ surfaces are also obtained. The appendix, written by Kota Yoshioka, discusses the behavior of the moduli spaces under change of polarization, as needed in the argument.

  20. Parametric Anatomical Modeling: A method for modeling the anatomical layout of neurons and their projections

    Directory of Open Access Journals (Sweden)

    Martin ePyka

    2014-09-01

    Full Text Available Computational models of neural networks can be based on a variety of different parameters. These parameters include, for example, the 3d shape of neuron layers, the neurons' spatial projection patterns, spiking dynamics and neurotransmitter systems. While many well-developed approaches are available to model, for example, the spiking dynamics, there is a lack of approaches for modeling the anatomical layout of neurons and their projections. We present a new method, called Parametric Anatomical Modeling (PAM, to fill this gap. PAM can be used to derive network connectivities and conduction delays from anatomical data, such as the position and shape of the neuronal layers and the dendritic and axonal projection patterns. Within the PAM framework, several mapping techniques between layers can account for a large variety of connection properties between pre- and post-synaptic neuron layers. PAM is implemented as a Python tool and integrated in the 3d modeling software Blender. We demonstrate on a 3d model of the hippocampal formation how PAM can help reveal complex properties of the synaptic connectivity and conduction delays, properties that might be relevant to uncover the function of the hippocampus. Based on these analyses, two experimentally testable predictions arose: i the number of neurons and the spread of connections is heterogeneously distributed across the main anatomical axes, ii the distribution of connection lengths in CA3-CA1 differ qualitatively from those between DG-CA3 and CA3-CA3. Models created by PAM can also serve as an educational tool to visualize the 3d connectivity of brain regions. The low-dimensional, but yet biologically plausible, parameter space renders PAM suitable to analyse allometric and evolutionary factors in networks and to model the complexity of real networks with comparatively little effort.

  1. Developing a sustainable bioprocessing strategy based on a generic feedstock.

    Science.gov (United States)

    Webb, C; Koutinas, Wang R; Wang, R

    2004-01-01

    Based on current average yields of wheat per hectare and the saccharide content of wheat grain, it is feasible to produce wheat-based alternatives to many petrochemicals. However, the requirements in terms of wheat utilization would be equivalent to 82% of current production if intermediates and primary building blocks such as ethylene, propylene, and butadiene were to be produced in addition to conventional bioproducts. If only intermediates and bioproducts were produced this requirement would fall to just 11%, while bioproducts alone would require only 7%. These requirements would be easily met if the global wheat yield per hectare of cultivated land was increased from the current average of 2.7 to 5.5 tonnes ha(-1) (well below the current maximum). Preliminary economic evaluation taking into account only raw material costs demonstrated that the use of wheat as a generic feedstock could be advantageous in the case of bioproducts and specific intermediate petrochemicals. Gluten plays a significant role considering the revenue occurring when it is sold as a by-product. A process leading to the production of a generic fermentation feedstock from wheat has been devised and evaluated in terms of efficiency and economics. This feedstock aims at providing a replacement for conventional fermentation media and petrochemical feedstocks. The process can be divided into four major stages--wheat milling; fermentation of whole wheat flour by A. awamori leading to the production of enzymes and fungal cells; glucose enhancement via enzymatic hydrolysis of flour suspensions; and nitrogen/micronutrient enhancement via fungal cell autolysis. Preliminary costings show that the operating cost of the process depends on plant capacity, cereal market price, presence and market value of added-value by-products, labour costs, and mode of processing (batch or continuous). PMID:15217108

  2. Generic superweak chaos induced by Hall effect

    Science.gov (United States)

    Ben-Harush, Moti; Dana, Itzhack

    2016-05-01

    We introduce and study the "kicked Hall system" (KHS), i.e., charged particles periodically kicked in the presence of uniform magnetic (B ) and electric (E ) fields that are perpendicular to each other and to the kicking direction. We show that for resonant values of B and E and in the weak-chaos regime of sufficiently small nonintegrability parameter κ (the kicking strength), there exists a generic family of periodic kicking potentials for which the Hall effect from B and E significantly suppresses the weak chaos, replacing it by "superweak" chaos (SWC). This means that the system behaves as if the kicking strength were κ2 rather than κ . For E =0 , SWC is known to be a classical fingerprint of quantum antiresonance, but it occurs under much less generic conditions, in particular only for very special kicking potentials. Manifestations of SWC are a decrease in the instability of periodic orbits and a narrowing of the chaotic layers, relative to the ordinary weak-chaos case. Also, for global SWC, taking place on an infinite "stochastic web" in phase space, the chaotic diffusion on the web is much slower than the weak-chaos one. Thus, the Hall effect can be relatively stabilizing for small κ . In some special cases, the effect is shown to cause ballistic motion for almost all parameter values. The generic global SWC on stochastic webs in the KHS appears to be the two-dimensional closest analog to the Arnol'd web in higher dimensional systems.

  3. Generic programming for deterministic neutron transport codes

    International Nuclear Information System (INIS)

    This paper discusses the implementation of neutron transport codes via generic programming techniques. Two different Boltzmann equation approximations have been implemented, namely the Sn and SPn methods. This implementation experiment shows that generic programming allows us to improve maintainability and readability of source codes with no performance penalties compared to classical approaches. In the present implementation, matrices and vectors as well as linear algebra algorithms are treated separately from the rest of source code and gathered in a tool library called 'Generic Linear Algebra Solver System' (GLASS). Such a code architecture, based on a linear algebra library, allows us to separate the three different scientific fields involved in transport codes design: numerical analysis, reactor physics and computer science. Our library handles matrices with optional storage policies and thus applies both to Sn code, where the matrix elements are computed on the fly, and to SPn code where stored matrices are used. Thus, using GLASS allows us to share a large fraction of source code between Sn and SPn implementations. Moreover, the GLASS high level of abstraction allows the writing of numerical algorithms in a form which is very close to their textbook descriptions. Hence the GLASS algorithms collection, disconnected from computer science considerations (e.g. storage policy), is very easy to read, to maintain and to extend. (authors)

  4. Generic waiting lists for routine spinal surgery.

    Science.gov (United States)

    Leach, P; Rutherford, S A; King, A T; Leggate, J R S

    2004-03-01

    National Health Service Hospitals are under pressure to reduce waiting lists within the constraints of a limited infrastructure. We implemented two systems to reduce waiting times for elective non-complex spinal surgery. The first of these was the introduction of managed generic waiting lists for both initial outpatient appointments and subsequent surgery. Thereafter, the MRI booking system was integrated with outpatient review appointments. Times from referral to first outpatient appointment and from scan to outpatient review and time on waiting list for surgery were analysed before and after implementation of these changes. Despite constant unit capacity there was a global decrease in waiting times. Before introduction of the generic waiting list, 37% of listed patients waited for more than 9 months; this figure fell to zero. Time from scan to outpatient review was 185 days before integration, 30 days after. Changes of this sort demand a quorum of consultants who will accept each others' recommendations. The generic waiting list will have impact only when there are large disparities in waiting times for different consultants. Targets are met at the expense of continuity of care. PMID:14996957

  5. Associations between generic substitution and patient-related factors

    DEFF Research Database (Denmark)

    Østergaard Rathe, Jette

    generically substitutable drug. Data were linked with a prescription database. Results We found no associations between generic substitution and, respectively, gender, age, drug group and polypharmacy. Earlier switches of the index drug are statistically significant associated with acceptance of generic...... more likely to switch again despite skepticism towards generic substitution. Points for discussion at EGPRN Discussion of the results,-that no difference in gender, age, drug group or polypharmacy exists, irrespective of switching generics or not. Discussion of the reason why one earlier index ATC...

  6. Generic tsunami scenarios for disasters and early warning preparedness

    Science.gov (United States)

    Guillande, Richard; Gardi, Annalisa; Valencia, Nathalia; Salaün, Tugdual

    2010-05-01

    The implementation of the tsunami early warning systems in the NE Atlantic and Mediterranean regions will occur in countries with no preparedness and very little knowledge of potentially affected coastal zones by the various tsunami sources. The final link to coastal communities will be sirens to distribute in the concerned areas. The SCHEMA project aims at elaboration of a generic method to consider various parameters of a particular tsunami scenario. A scenario corresponds to a specific source with a given magnitude or intensity. Since we do not consider only the remote sources with possibilities of warning, local earthquake and submarine landslides are also translated in scenarios to allow the civil protections, municipalities and local stakeholders to assess cases with no real warning possibility, where life will be saved by self evacuation in nearby shelter areas or buildings. The specific temporal dimension of tsunami phenomenon is considered. Oceanic propagation time, expected duration of dangerous waves and wavelength are taken into account with their level of uncertainties. Scenarios are presented by maps and layouts with various information: inundation extension, submersion depth, receding sea limit, currents velocity or modulus of flow, modeled damage level to buildings, affected networks and lifelines. Variable dimensions such as residing or working population, by hour of the day and by season are also considered. Secondary vulnerability factors which may increase damage level to buildings are added (potentially floating objects which may turn into projectiles). The potential evacuation routes and obstacles are represented to support installation of warning networks and definition of shelters as well as evacuation routes. The scenarios are calculated using accurate digital bathymetric and topographic model with less than 10 m ground resolution allowing a very detailed mapping. This accuracy is especially important for scenarios with moderate waves for

  7. An Investigation of Anatomical Competence in Junior Medical Doctors

    Science.gov (United States)

    Vorstenbosch, Marc A. T. M.; Kooloos, Jan G. M.; Bolhuis, Sanneke M.; Laan, Roland F. J. M.

    2016-01-01

    Because of a decrease of the time available for anatomy education, decisions need to be made to reduce the relevant content of the anatomy curriculum. Several expert consensus initiatives resulted in lists of structures, lacking analysis of anatomical competence. This study aims to explore the use of anatomical knowledge by medical doctors in an…

  8. PC Assisted Anatomical Measurements in 3D Using CT Data

    DEFF Research Database (Denmark)

    Hvidtfeldt, Mogens; Pedersen, Steen

    1999-01-01

    To assess facilities and applications of a programme for a PC based CT measurements in 3D of anatomical angelse in the skeleton.......To assess facilities and applications of a programme for a PC based CT measurements in 3D of anatomical angelse in the skeleton....

  9. Review of the Historical Evolution of Anatomical Terms

    Directory of Open Access Journals (Sweden)

    Algieri, Rubén D.

    2011-12-01

    Full Text Available Most of the medical terms of Greek origin are traditionally attributed to Hippocrates (460-370 BC. Claudius Galen of Pergamum (130-200 BC developed a classification of bones and joints and described different brain areas. His teachings have remained unchanged for over a thousand years. Andreas Vesalius of Brussels (1514-1564, through the systematic study of human body structure, changed many concepts. He published his work in his production "De humani corporis fabrica libri septem", where a special attention is evident to the discovery and description of new anatomical facts. From here there is a revolution in the morphological sciences, where the same anatomical structure passed to receive different names. In the nineteenth century, the different anatomists in the world decide to meet in order to unify criteria regarding the anatomical structures and determine a only one universal language in the anatomical sciences. In 1895, in Basel (Switzerland it’s approved a list of 5.573 terms, called Basle Nomina Anatomica (BNA and was written in Latin. Eponyms were deleted. In 1903, he founded the International Federation of Associations of anatomists (IFAA. In 1935, in Jena (Germany, approving the Jena Nomina Anatomica (JNA. In 1950, in Oxford, formed the Committee of the International Anatomical Nomenclature (IANC. In 1955, in Paris (France it is agreed to adopt a Latin nomenclature based on the BNA, the Paris Nomina Anatomica (PNA. In 1980, for the first time in Latin America, takes place on the 11th International Congress of Anatomists, Mexico. In 1989, the International Committee of Anatomical Nomenclature, published the sixth edition of the Nomina Anatomica, without review by the IFAA. The same year, the latter established a Federative International Committee of Anatomical Terminology (FICAT. In 1998, he published a new list FICAT: International Anatomical Terminology (TAI, with the structures named in Latin language and their equivalence in

  10. A generic coordinate system and a set of generic variables for MFE database

    International Nuclear Information System (INIS)

    Over the last several years, profile data from nine different tokamaks have been stored in the magnetic fusion energy database (MFEDB). These data sets have come from a variety of sources and most are given in different coordinate systems. In order to attempt any intermachine analysis, it is convenient to transform these data sets into one generic coordinate system and to choose a uniform set of variable names. The authors describe the data sets from each tokamak indicating the source of the data and the coordinate system in which it is given. Next, they discuss the generic coordinate that has been adopted and show how it is implemented for each tokamak. Finally, the generic naming convention that has been adopted is discussed. It follows closely that which was used by Christiansen et al. for the ITER Global Energy Confinement H-Mode Database. For further clarification, they discuss the characteristics of the magnetic geometry given a Fourier representation of the magnetic equilibria

  11. Advances on generic exemption levels and generic clearance levels in the argentinean regulatory field

    International Nuclear Information System (INIS)

    With the aim of optimizing the regulatory effort in Argentina, the Nuclear Regulatory Authority (ARN) evaluated two worldwide concepts used in the radioactive waste management field: “Generic Exemption Levels” and “Generic Clearance Levels”. The objective of this paper is to present the progress made in the past two years in relation to these topics and to present the results of the specific requests received from users of radioactive material. Since the approval of both Generic Levels, the ARN received two exemption requests. The first one, regarding the practice of dismantling lighting rods with 241Am. The other case regards the international trade, distribution, usage and final disposal of lighting products with radioactive material (85Kr and 232Th). Concerning clearance, there has not been any request yet. However, in the future the ARN expects to receive this kind of requests from nuclear power plants and other facilities related to the nuclear fuel cycle. (authors)

  12. Anatomical imbalance between cortical networks in autism

    Science.gov (United States)

    Watanabe, Takamitsu; Rees, Geraint

    2016-01-01

    Influential psychological models of autism spectrum disorder (ASD) have proposed that this prevalent developmental disorder results from impairment of global (integrative) information processing and overload of local (sensory) information. However, little neuroanatomical evidence consistent with this account has been reported. Here, we examined relative grey matter volumes (rGMVs) between three cortical networks, how they changed with age, and their relationship with core symptomatology. Using public neuroimaging data of high-functioning ASD males and age-/sex-/IQ-matched controls, we first identified age-associated atypical increases in rGMVs of the regions of two sensory systems (auditory and visual networks), and an age-related aberrant decrease in rGMV of a task-control system (fronto-parietal network, FPN) in ASD children. While the enlarged rGMV of the auditory network in ASD adults was associated with the severity of autistic socio-communicational core symptom, that of the visual network was instead correlated with the severity of restricted and repetitive behaviours in ASD. Notably, the atypically decreased rGMV of FPN predicted both of the two core symptoms. These findings suggest that disproportionate undergrowth of a task-control system (FPN) may be a common anatomical basis for the two ASD core symptoms, and relative overgrowth of the two different sensory systems selectively compounds the distinct symptoms. PMID:27484308

  13. Anatomical imbalance between cortical networks in autism.

    Science.gov (United States)

    Watanabe, Takamitsu; Rees, Geraint

    2016-01-01

    Influential psychological models of autism spectrum disorder (ASD) have proposed that this prevalent developmental disorder results from impairment of global (integrative) information processing and overload of local (sensory) information. However, little neuroanatomical evidence consistent with this account has been reported. Here, we examined relative grey matter volumes (rGMVs) between three cortical networks, how they changed with age, and their relationship with core symptomatology. Using public neuroimaging data of high-functioning ASD males and age-/sex-/IQ-matched controls, we first identified age-associated atypical increases in rGMVs of the regions of two sensory systems (auditory and visual networks), and an age-related aberrant decrease in rGMV of a task-control system (fronto-parietal network, FPN) in ASD children. While the enlarged rGMV of the auditory network in ASD adults was associated with the severity of autistic socio-communicational core symptom, that of the visual network was instead correlated with the severity of restricted and repetitive behaviours in ASD. Notably, the atypically decreased rGMV of FPN predicted both of the two core symptoms. These findings suggest that disproportionate undergrowth of a task-control system (FPN) may be a common anatomical basis for the two ASD core symptoms, and relative overgrowth of the two different sensory systems selectively compounds the distinct symptoms. PMID:27484308

  14. Lateral femoral cutaneous neuralgia: an anatomical insight.

    Science.gov (United States)

    Dias Filho, L C; Valença, M M; Guimarães Filho, F A V; Medeiros, R C; Silva, R A M; Morais, M G V; Valente, F P; França, S M L

    2003-07-01

    A detailed anatomic study was carried out on the lateral femoral cutaneous nerve to better understand the etiology and treatment of lateral femoral cutaneous neuralgia. As it passed from the pelvis into the thigh, the lateral femoral cutaneous nerve ran through an "aponeuroticofascial tunnel," beginning at the iliopubic tract and ending at the inguinal ligament; as it passed through the tunnel, an enlargement in its side-to-side diameter was observed, suggesting that the fascial structures proximal to the inguinal ligament may be implicated in the genesis of lateral femoral cutaneous neuralgia. The finding of pseudoneuromas at this location, distant from the inguinal ligament, supports this hypothesis. The anterior superior iliac spine is located approximately 0.7 cm from the lateral femoral cutaneous nerve and serves as the bony landmark for nerve localization. Within the first 3 cm of leaving the pelvis, the lateral femoral cutaneous nerve was observed deep to the fascia lata; therefore, surgical dissection within the subcutaneous fascia may be conducted with relative impunity near the anterior superior iliac spine just inferior to the inguinal ligament. In 36% of cases there was no posterior branch of the nerve, which is correlated to lateral femoral cutaneous neuralgia symptoms often being limited to the anterior branch region. An accessory nerve was found in 30% of cases. PMID:12794914

  15. Anatomical challenges for transcatheter mitral valve intervention.

    Science.gov (United States)

    DE Backer, Ole; Luk, Ngai H; Søndergaard, Lars

    2016-06-01

    Following the success of transcatheter aortic and pulmonary valve implantation, there is a large interest in transcatheter mitral valve interventions to treat severe mitral regurgitation (MR). With the exception for the MitraClipTM (Abbott, Abbott Park, IL, USA) edge-to-edge leaflet plication system, most of these transcatheter mitral valve interventions are still in their early clinical or preclinical development phase. Challenges arising from the complex anatomy of the mitral valve and the interplay of the mitral apparatus with the left ventricle (LV) have contributed to a more difficult development process and mixed clinical results with these novel technologies. This review aims to discuss the several anatomical aspects and challenges related to transcatheter mitral valve intervention - the relevant anatomy will be reviewed in relation to specific requirements for device design and procedural aspects of transcatheter mitral valve interventions. To date, experience with these novel therapeutic modalities are still limited and resolution of many challenges are pending. Future studies have to evaluate for whom the transcatheter approach is a feasible and preferred treatment and which patients will benefit from either transcatheter mitral valve repair or replacement. Nevertheless, technological developments are anticipated to drive the transcatheter approach forward into a clinically feasible alternative to surgery for selected patients with severe MR. PMID:27028333

  16. Prescribing generic drugs using a generic name: Are we teaching it right?

    Science.gov (United States)

    Kamath, Ashwin

    2016-01-01

    The Indian Medical Council (Professional conduct, Etiquette and Ethics) Regulations, 2002, state that "Every physician should, as far as possible, prescribe drugs with generic names and he/she shall ensure that there is a rational prescription and use of drugs.". Undergraduate medical students are introduced to drug nomenclature early on during their pharmacology course. They are told that generic name or, more appropriately, non-proprietary name (usually international non-proprietary name INN), is to be used while writing prescriptions. PMID:27474700

  17. Anatomical analysis of human masseter using MRI

    International Nuclear Information System (INIS)

    To quantitatively elucidate individual variation in human masseter muscle, the cross sectional area of this muscle was measured in situ with MRI apparatus. The results were analyzed against age, body build and laterality in habitual mastication by bivariate correlation analysis. Materials included 52 healthy volunteers (26 males, 26 females). Right and left masseter areas and total cross sectional area of the face were measured in the same horizontal plane, and directly displayed on the console of the MRI apparatus. The areas of masseter muscles were not correlated with age or body build, but were positively correlated with the total cross sectional area of the face in the same horizontal plane. Because the left masseters tended to be larger than right, a method for evaluation of the relative size of each side of the messeters was established. This analysis revealed that the corrected dominance of the masseter corresponded, with high probability, to the habitual laterality in mastication. (author)

  18. Reactor building

    International Nuclear Information System (INIS)

    The whole reactor building is accommodated in a shaft and is sealed level with the earth's surface by a building ceiling, which provides protection against penetration due to external effects. The building ceiling is supported on walls of the reactor building, which line the shaft and transfer the vertical components of forces to the foundations. The thickness of the walls is designed to withstand horizontal pressure waves in the floor. The building ceiling has an opening above the reactor, which must be closed by cover plates. Operating equipment for the reactor can be situated above the building ceiling. (orig./HP)

  19. A Generic Approach to Searching for Jacobians

    OpenAIRE

    Sutherland, Andrew V.

    2007-01-01

    We consider the problem of finding cryptographically suitable Jacobians. By applying a probabilistic generic algorithm to compute the zeta functions of low genus curves drawn from an arbitrary family, we can search for Jacobians containing a large subgroup of prime order. For a suitable distribution of curves, the complexity is subexponential in genus 2, and O(N^{1/12}) in genus 3. We give examples of genus 2 and genus 3 hyperelliptic curves over prime fields with group orders over 180 bits i...

  20. $F$-singularities under generic linkage

    OpenAIRE

    Ma, Linquan; Page, Janet; G, Rebecca R.; Taylor, William; Zhang, Wenliang

    2016-01-01

    Let $R=k[x_1,\\dots,x_n]$ be a polynomial ring over a prefect field of positive characteristic. Let $I$ be an unmixed ideal in $R$ and let $J$ be a generic link of $I$ in $S=R[u_{ij}]_{c \\times r}$. We describe the parameter test submodule of $S/J$ in terms of the test ideal of the pair $(R, I)$ when a reduction of $I$ is a complete intersection or almost complete intersection. As an application, we deduce a criterion for when $S/J$ has $F$-rational singularities in these cases. We also compar...

  1. Generic Patch Inference

    DEFF Research Database (Denmark)

    Andersen, Jesper; Lawall, Julia Laetitia

    2008-01-01

    A key issue in maintaining Linux device drivers is the need to update drivers in response to evolutions in Linux internal libraries. Currently, there is little tool support for performing and documenting such changes. In this paper we present a tool, spfind, that identifies common changes made in a...... developers can use it to extract an abstract representation of the set of changes that others have made. Our experiments on recent changes in Linux show that the inferred generic patches are more concise than the corresponding patches found in commits to the Linux source tree while being safe with respect to...

  2. Making sense of a generic label

    DEFF Research Database (Denmark)

    Lassen, Inger

    2016-01-01

    2003: 72; Swales 1990). In such studies, analysis of generic structure (moves/ stages) has been predominant and highly relevant for understanding institutionalized motives and the rhetorical objectives carried by each move (Lassen 2006). In a similar vein, Bhatia (2004: 22) has suggested that “genre...... discourse analysis as part of a course in Management and Communication. In the exam question, students were introduced to two apparently different genres. These included a genre that was so far unfamiliar to the students, viz. a ‘Suppliers Code of Conduct’, and a second genre (a job advertisement) that the...

  3. The generic Gröbner walk

    DEFF Research Database (Denmark)

    Jensen, Anders Nedergaard; Lauritzen, Niels; Fukuda, Komei;

    2005-01-01

    The Gröbner walk is an algorithm for conversion between Gröbner bases for different term orders. It is based on the polyhedral geometry of the Gröbner fan and involves tracking a line between cones representing the initial and target term order. An important parameter is explicit numerical...... perturbation of this line. This usually involves both time and space demanding arithmetic of integers much larger than the input numbers. In this paper we show how the explicit line may be replaced by a formal line using Robbiano's characterization of group orders on . This gives rise to the generic Gröbner...

  4. Generic device driver for serial communication

    OpenAIRE

    Juvan, Vid

    2014-01-01

    The goal of the thesis is first to provide a clear explanation of how serial communication works and to review the latest work and progress in the field of serial communication. The second goal of this thesis is to create a generic driver for the purposes of communicating with a device using a serial communication. Since it is required for every type of a device that communicates using a serial port, to implement a dedicated driver, it is logical to simplify this implementation and shor...

  5. Generic attack approaches for industrial control systems.

    Energy Technology Data Exchange (ETDEWEB)

    Duggan, David P.

    2006-01-01

    This report suggests a generic set of attack approaches that are expected to be used against Industrial Control Systems that have been built according to a specific reference model for control systems. The posed attack approaches are ordered by the most desirable, based upon the goal of an attacker. Each attack approach is then graded by the category of adversary that would be capable of utilizing that attack approach. The goal of this report is to identify necessary levels of security required to prevent certain types of attacks against Industrial Control Systems.

  6. The Portuguese generic medicines market: A policy analysis.

    Directory of Open Access Journals (Sweden)

    Simoens S

    2009-06-01

    Full Text Available Objectives: This study aims to conduct a descriptive analysis of the policy environment surrounding the generic medicines retail market in Portugal. The policy analysis focuses on supply-side measures (i.e. market access, pricing, reference-pricing and reimbursement of generic medicines and demand-side measures (i.e. incentives for physicians to prescribe, for pharmacists to dispense and for patients to use generic medicines.Methods: The policy analysis was based on an international literature review. Also, a simulation exercise was carried out to compute potential savings from substituting generic for originator medicines in Portugal using IMS Health data.Results: Portugal has developed a successful generic medicines market by increasing reimbursement of generic medicines (until October 2005, by introducing a reference-pricing system, by encouraging physicians to prescribe by international non-proprietary name (INN, and by allowing generic substitution by pharmacists. However, the development of the generic medicines market has been hindered by the existence of copies, pricing regulation, certain features of the reference-pricing system, weak incentives for physicians to prescribe generic medicines and a financial disincentive for pharmacists to dispense generic medicines. Increased generic substitution would be expected to reduce public expenditure on originator medicines by 45%.Conclusions: The development of the Portuguese generic medicines market has mainly been fuelled by supply-side measures. To support the further expansion of the market, policy makers need to strengthen demand-side measures inciting physicians to prescribe, pharmacists to dispense and patients to use generic medicines.

  7. Embryologic and anatomic basis of duodenal surgery.

    Science.gov (United States)

    Androulakis, J; Colborn, G L; Skandalakis, P N; Skandalakis, L J; Skandalakis, J E

    2000-02-01

    The following points should be remembered by surgeons (Table 1). In writing about the head of the pancreas, the common bile duct, and the duodenum in 1979, the authors stated that Embryologically, anatomically and surgically these three entities form an inseparable unit. Their relations and blood supply make it impossible for the surgeon to remove completely the head of the pancreas without removing the duodenum and the distal part of the common bile duct. Here embryology and anatomy conspire to produce some of the most difficult surgery of the abdominal cavity. The only alternative procedure, the so-called 95% pancreatectomy, leaves a rim of pancreas along the medial border of the duodenum to preserve the duodenal blood supply. The authors had several conversations with Child, one of the pioneers of this procedure, whose constant message was to always be careful with the blood supply of the duodenum (personal communication, 1970). Beger et al popularized duodenum-preserving resection of the pancreatic head, emphasizing preservation of endocrine pancreatic function. They reported that ampullectomy (removal of the papilla and ampulla of Vater) carries a mortality rate of less than 0.4% and a morbidity rate of less than 10.0%. Surgeons should not ligate the superior and inferior pancreaticoduodenal arteries because such ligation may cause necrosis of the head of the pancreas and of much of the duodenum. The accessory pancreatic duct of Santorini passes under the gastrointestinal artery. For safety, surgeons should ligate the artery away from the anterior medial duodenal wall, where the papilla is located, thereby avoiding injury to or ligation of the duct. "Water under the bridge" applies not only to the relationship of the uterine artery and ureter but also to the gastroduodenal artery and the accessory pancreatic duct. In 10% of cases, the duct of Santorini is the only duct draining the pancreas, so ligation of the gastroduodenal artery with accidental inclusion of

  8. ACCESSORY SPLEEN: A CLINICALLY RELEVANT ANATOMIC ANOMALY

    Directory of Open Access Journals (Sweden)

    Prachi Saffar

    2016-02-01

    Full Text Available The purpose of our study is to emphasize on the clinical relevance of the presence of accessory spleen. It is not only a well-documented anatomic anomaly, it holds special significance in the differential diagnosis of intra-abdominal tumours and lymphadenopathy. MATERIALS AND METHODS Thirty male cadavers from North Indian population above the age of 60 yrs. were dissected in the Anatomy Department of FMHS, SGT University, Gurgaon, over a period of 5 yrs. (Sep 2010-Aug 2015 and presence of accessory spleen recorded. Tissue from the accessory spleen was also subjected to routine histological processing and slide prepared by haematoxylin and eosin staining. RESULTS Accessory spleen was present in two cadavers near the splenic hilum. One was 3.9 cm in the long axis and weighed about 48.4 grams, while the other was 1.2 cm in long axis and weighed about 12.5 grams. One had a separate arterial branch from the main splenic artery; that it was splenic tissue was confirmed histologically. DISCUSSION The presence of accessory spleen is considered to be due to embryonic non-fusion of the splenic aggregate with the main mass. CONCLUSION Though accessory spleen in itself pose no clinical problems, its significance cannot be undermined. Surgeons and radiologists are advised to look for and rule out the presence of accessory spleen, especially while evaluating a case of abdominal and perineal pathology, else it may be wrongly diagnosed as malignant tumour or enlarged lymph node leading to grave consequences.

  9. Collaborative regression-based anatomical landmark detection

    Science.gov (United States)

    Gao, Yaozong; Shen, Dinggang

    2015-12-01

    Anatomical landmark detection plays an important role in medical image analysis, e.g. for registration, segmentation and quantitative analysis. Among the various existing methods for landmark detection, regression-based methods have recently attracted much attention due to their robustness and efficiency. In these methods, landmarks are localised through voting from all image voxels, which is completely different from the classification-based methods that use voxel-wise classification to detect landmarks. Despite their robustness, the accuracy of regression-based landmark detection methods is often limited due to (1) the inclusion of uninformative image voxels in the voting procedure, and (2) the lack of effective ways to incorporate inter-landmark spatial dependency into the detection step. In this paper, we propose a collaborative landmark detection framework to address these limitations. The concept of collaboration is reflected in two aspects. (1) Multi-resolution collaboration. A multi-resolution strategy is proposed to hierarchically localise landmarks by gradually excluding uninformative votes from faraway voxels. Moreover, for informative voxels near the landmark, a spherical sampling strategy is also designed at the training stage to improve their prediction accuracy. (2) Inter-landmark collaboration. A confidence-based landmark detection strategy is proposed to improve the detection accuracy of ‘difficult-to-detect’ landmarks by using spatial guidance from ‘easy-to-detect’ landmarks. To evaluate our method, we conducted experiments extensively on three datasets for detecting prostate landmarks and head & neck landmarks in computed tomography images, and also dental landmarks in cone beam computed tomography images. The results show the effectiveness of our collaborative landmark detection framework in improving landmark detection accuracy, compared to other state-of-the-art methods.

  10. The Blooming Anatomy Tool (BAT): A Discipline-Specific Rubric for Utilizing Bloom's Taxonomy in the Design and Evaluation of Assessments in the Anatomical Sciences

    Science.gov (United States)

    Thompson, Andrew R.; O'Loughlin, Valerie D.

    2015-01-01

    Bloom's taxonomy is a resource commonly used to assess the cognitive level associated with course assignments and examination questions. Although widely utilized in educational research, Bloom's taxonomy has received limited attention as an analytical tool in the anatomical sciences. Building on previous research, the Blooming Anatomy Tool (BAT)…

  11. ANATOMICAL LANDMARKS FOR ROBOTIC NERVE SPARING RADICAL PROSTATECTOMY

    Directory of Open Access Journals (Sweden)

    T. N. Moiseenko

    2013-01-01

    Full Text Available A detailed anatomical study of the prostate and pelvic organs has been recently relevant. Their anatomical knowledge is directly associated with the improved procedure of nerve-sparing robot-assisted radical prostatectomy, which contributes to the preservation of the anatomical structures responsible for postsurgical erection and urinary continence. The main tasks of radical prostatectomy are effective cancer control, early recovery of urinary continence, and recovery of erectile function.The literature on the anatomy of the prostate and its adjacent structures is analyzed in the context of nerve-sparing robot-assisted radical prostatectomy.

  12. Anatomic Double-Bundle Posterior Cruciate Ligament Reconstruction.

    Science.gov (United States)

    Chahla, Jorge; Nitri, Marco; Civitarese, David; Dean, Chase S; Moulton, Samuel G; LaPrade, Robert F

    2016-02-01

    The posterior cruciate ligament (PCL) is known to be the main posterior stabilizer of the knee. Anatomic single-bundle PCL reconstruction, focusing on reconstruction of the larger anterolateral bundle, is the most commonly performed procedure. Because of the residual posterior and rotational tibial instability after the single-bundle procedure and the inability to restore the normal knee kinematics, an anatomic double-bundle PCL reconstruction has been proposed in an effort to re-create the native PCL footprint more closely and to restore normal knee kinematics. We detail our technique for an anatomic double-bundle PCL reconstruction using Achilles and anterior tibialis tendon allografts. PMID:27284530

  13. On searching generic properties of non generic phenomena: an approach to bioinformatic theory formation

    NARCIS (Netherlands)

    Hogeweg, P.

    2001-01-01

    In this paper we first shortly review the current view of the evolution of complexity and novelty in biotic evo- lution. Next we show that the basic processes thereof do happen automatically and are generic properties of systems including the basic mechanisms of Darwini- an evolution plus local as o

  14. Building America

    Energy Technology Data Exchange (ETDEWEB)

    Brad Oberg

    2010-12-31

    IBACOS researched the constructability and viability issues of using high performance windows as one component of a larger approach to building houses that achieve the Building America 70% energy savings target.

  15. Generic rigidity percolation in two dimensions

    Science.gov (United States)

    Jacobs, D. J.; Thorpe, M. F.

    1996-04-01

    We study rigidity percolation for random central-force networks on the bondand site-diluted generic triangular lattice. Here, each site location is randomly displaced from the perfect lattice, removing any special symmetries. Using the pebble game algorithm, the total number of floppy modes are counted exactly, and exhibit a cusp singularity in the second derivative at the transition from a rigid to a floppy structure. The critical thresholds for bond and site dilution are found to be 0.66020+/-0.0003 and 0.69755+/-0.0003, respectively. The network is decomposed into unique rigid clusters, and we apply the usual percolation scaling theory. From finite size scaling, we find that the generic rigidity percolation transition is second order, but in a different universality class from connectivity percolation, with the exponents α=-0.48+/-0.05, β=0.175+/-0.02, and ν=1.21+/-0.06. The fractal dimension of the spanning rigid clusters and the spanning stressed regions at the critical threshold are found to be df=1.86+/-0.02 and dBB=1.80+/-0.03, respectively.

  16. MULTITASKS-GENERIC PLATFORM VIA WSN

    Directory of Open Access Journals (Sweden)

    Mahmoud Mezghani

    2011-08-01

    Full Text Available In recent years, the use of wireless sensor network invade various areas (domotic/home automationfields, medical, industrial …, which sets up several applications such as control of energy consumptionin the habitat, home entertainment system, security system of the intelligent home, health care, … Eachapplication employed its own platform what restore the system very complex. For thus and in this paper,we proposed only one platform for all applications, that’s qualified to generate endless tasks. It coversmany commands developed with a generic remote control interface created by C# language. This genericinterface is very adaptable & adjusts oneself to TinyOS operating system requirements and able to beaccessed via Internet using 6LoWPAN protocol. Validate the proper operation of this generic platformmulti-tasking is approved on several levels:at the implementation of a proposed solution to control energy consumption in the smart home which thesuggested solution is based on the techniques of scheduling under constraints of resources; at theautomation of habitat and in the overall context of the intelligent home and the other to improve thequality of life and make it more comfortable ;across of the practical assistance and to set monitoring ofthe patient and to keep track of his statement by the doctor and that, whether at home or in the route tothe hospital or in the hospital.

  17. The generic danger and the idiosyncratic support

    Science.gov (United States)

    Temme, Arnaud; Nijp, Jelmer; van der Meij, Marijn; Samia, Jalal; Masselink, Rens

    2016-04-01

    This contribution argues two main points. First, that generic landscapes used in some modelling studies sometimes have properties or cause simulation results that are unrealistic. Such initially flat or straight-sloped landscapes, sometimes with minor random perturbations, e.g. form the backdrop for ecological simulations of vegetation growth and competition that predict catastrophic shifts. Exploratory results for semi-arid systems suggest that the results based on these generic landscapes are end-members from a distribution of results, rather than an unbiased, typical outcome. Apparently, the desire to avoid idiosyncrasy has unintended consequences. Second, we argue and illustrate that in fact new insights often come from close inspection of idiosyncratic case studies. Our examples from landslide systems, connectivity and soil formation show how a central role for the case study - either in empirical work or to provide model targets - has advanced our understanding. Both points contribute to the conclusion that it is dangerous to forget about annoying, small-scale, idiosyncratic and, indeed, perhaps bad-ass case studies in Earth Sciences.

  18. A prioritization of generic safety issues

    International Nuclear Information System (INIS)

    This report presents the priority rankings for generic safety issues and related to nuclear power plants. The purpose of these rankings is to assist in the timely and efficient allocation of NRC resources for the resolution of those safety issues that have a significant potential for reducing risk. The report focuses on the prioritization of generic safety issues. Issues primarily concerned with the licensing process or environmental protection and not directly related to safety have been excluded from prioritization. The prioritized issues include: TMI Action Plan items under development; previously proposed issues covered by Task Action Plans, except issues designated as Un-resolved Safety Issues (USIs) which had already been assigned high priority; and newly-proposed issues. Future supplements to this report will include the prioritization of additional issues. The safety priority rankings are High, Medium, Low, and Drop and have been assigned on the basis of risk significance estimates, the ratio of risk to costs and other impacts estimated to result if resolutions of the safety issues were implemented, and the consideration of uncertainties and other quantitative or qualitative factors. To the extent practical, estimates are quantitative. 1310 refs

  19. Solar building

    OpenAIRE

    Zhang, Luxin

    2014-01-01

    In my thesis I describe the utilization of solar energy and solar energy with building integration. In introduction it is also mentioned how the solar building works, trying to make more people understand and accept the solar building. The thesis introduces different types of solar heat collectors. I compared the difference two operation modes of solar water heating system and created examples of solar water system selection. I also introduced other solar building applications. It is conv...

  20. A generic expert system for materials processing in space

    Science.gov (United States)

    Andersen, Kristinn; Cook, George E.; Strauss, Alvin M.

    1988-01-01

    A generic expert system is described for inspecting materials processed in space (MPS). The system may be applied, with the appropriate knowledge base, to any of the nondestructive testing methods (NDT) which are appropriate to MPS. Regardless of the method being used, the inspection process consists of three tasks: (1) signal or image processing of the NDT output and feature extraction, (2) interpretation of features in terms of MPS discontinuities, and (3) evaluation of the quality of the MPS based upon industry standards. In contrast to rule based systems, this system represents its knowledge as multidimensional vectors and appropriate functions on them. Currently, the expert system accepts manual input of observed features. Once the expert system has been tested and compared to human expert inspectors, a vision front-end will be developed to complete automation of the expert MPS inspection system, based on visual discontuities. Then the data base will be extended to include a variety of other NDT methods. In addition to functional performance, ease of use was established through menu window driven input as well as flexibility in building, using and modifying data bases for different applications.

  1. ARCHITECTURAL FRAMEWORK FOR GENERIC MODELING AND DIAGRAMMING IN THE CLOUD

    Directory of Open Access Journals (Sweden)

    Laszlo Juracz

    2011-01-01

    Full Text Available This paper is aimed at presenting a concept of a flexible diagramming framework for building engineering and educational applications. The framework was designed to serve as a platform for online services and collaborative environments where users typically work on remotely stored, shared data through a browser-based user interface. The paper summarizes the common requirements towards such services, overviews related approaches and gives insights into some design challenges through the analysis of two use-cases. The design problem is examined from a user-centered view: the key motivation of our research is to find innovative, possibly device- independent solutions that enable seamless user experiences. A generic framework based on JavaScript and HTML5 on the client-side, using novel, high-performance JavaScript technologies on the server-side is proposed. This framework could be employed for implementing a wide spectrum of software solutions from diagramming- related e-learning to cloud-based modeling environments.

  2. Generic XML-based framework for metadata portals

    Science.gov (United States)

    Schindler, Uwe; Diepenbroek, Michael

    2008-12-01

    We present a generic and flexible framework for building geoscientific metadata portals independent of content standards for metadata and protocols. Data can be harvested with commonly used protocols (e.g., Open Archives Initiative Protocol for Metadata Harvesting) and metadata standards like DIF or ISO 19115. The new Java-based portal software supports any XML encoding and makes metadata searchable through Apache Lucene. Software administrators are free to define searchable fields independent of their type using XPath. In addition, by extending the full-text search engine (FTS) Apache Lucene, we have significantly improved queries for numerical and date/time ranges by supplying a new trie-based algorithm, thus, enabling high-performance space/time retrievals in FTS-based geo portals. The harvested metadata are stored in separate indexes, which makes it possible to combine these into different portals. The portal-specific Java API and web service interface is highly flexible and supports custom front-ends for users, provides automatic query completion (AJAX), and dynamic visualization with conventional mapping tools. The software has been made freely available through the open source concept.

  3. Building 2000

    International Nuclear Information System (INIS)

    This is the first volume of Building 2000, a pilot project of the Commission's R and D-programme 'Solar Energy Applications to Buildings' with the purpose of encouraging the adoption of solar architecture in large buildings. In this first rich illustrated volume the results of the design studies illustrating passive solar architecture in buildings in the European Community are presented in particular for the building categories as mentioned in the subtitle. In a second volume, a similar series of studies is presented for the building categories: office buildings, public buildings and hotels and holiday complexes. Several Design Support Workshops were organized during the Building 2000 programme during which Building 2000 design teams could directly exchange ideas with the various design advice experts represented at these workshops. In the second part of the Building 2000 final report a summary of a selection of many reports is presented (15 papers), as produced by Design Support experts. Most of the design support activities resulted in changes of the various designs, as have been reported by the design teams in the brochures presented in the first part of this book. It is to be expected that design aids and simulation tools for passive solar options, daylighting concepts, comfort criteria etc., will be utilized more frequently in the future. This will result in a better exchange of information between the actual design practitioners and the European R and D community. This technology transfer will result in buildings with a higher quality with respect to energy and environmental issues

  4. Usability of Generic Software in e-Research Infrastructures

    OpenAIRE

    2011-01-01

    In e-Research Infrastructures (eRIs), software is used in diverse application contexts. To support this software is often implemented generically. The usability of software is strongly context dependent. Therefore, the use of generic software in different application contexts results in varying degress of usability depending on the concrete usage scenario. This paper focuses on the challenges of implementing usability-oriented generic software. First, we provide an introduction to...

  5. Generic Advertising in Concentrated and Differentiated Agricultural Markets

    OpenAIRE

    Han, Sungill; Chung, Chanjin; Suh, Daeseok

    2011-01-01

    This study develops an analytical framework to examine the impact of generic advertising on brand advertising with alternative assumptions on demand changes (shift-up and rotation), product differentiation, market concentration, and relationship between commodity and brand advertising programs. The newly developed model allows one to determine the relationship between generic and brand advertising, which has not been clearly shown in previous studies. Analytical results show that when generic...

  6. Guide for generic application of Reliability Centered Maintenance (RCM) recommendations

    International Nuclear Information System (INIS)

    Previously completed reliability centered maintenance (RCM) studies form the basis for developing or refining a preventive maintenance program. This report describes a generic methodology that will help utilities optimize nuclear plant maintenance programs using RCM techniques. This guide addresses the following areas: history of the generic methodology development process, and use of the generic methodology for conducting system-to-system and component-to-component evaluations. 2 refs., 2 figs., 5 tabs

  7. Generic personality and emotion simulation for conversational agents

    OpenAIRE

    Egges, A.; Kshirsagar, S.; Magnenat-Thalmann, N.

    2008-01-01

    This paper describes a generic model for personality, mood and emotion simulation for conversational virtual humans. We present a generic model for updating the parameters related to emotional behaviour, as well as a linear implementation of the generic update mechanisms. We explore how existing theories for appraisal can be integrated into the framework. Then we describe a prototype system that uses the described models in combination with a dialogue system and a talking head with synchroniz...

  8. Pharmaceutical Use Following Generic Entry: Paying Less and Buying Less

    OpenAIRE

    Huckfeldt, Peter J; Christopher R. Knittel

    2011-01-01

    We study the effects of generic entry on prices and utilization using both event study models that exploit the differential timing of generic entry across drug molecules and cast studies. Our analysis examines drugs treating hypertension, high blood pressure, type 2 diabetes, and depression using price and utilization data from the Medical Expenditure Panel Survey. We find that utilization of drug molecules starts decreasing in the two years prior to generic entry and continues to decrease in...

  9. Encouraging the use of generic medicines: implications for transition economies.

    Science.gov (United States)

    King, Derek R; Kanavos, Panos

    2002-08-01

    Generic drugs have a key role to play in the efficient allocation of financial resources for pharmaceutical medicines. Policies implemented in the countries with a high rate of generic drug use, such as Canada, Denmark, Germany, the Netherlands, the United Kingdom, and the United States, are reviewed, with consideration of the market structures that facilitate strong competition. Savings in these countries are realized through increases in the volume of generic drugs used and the frequently significant differences in the price between generic medicines and branded originator medicines. Their policy tools include the mix of supply-side measures and demand-side measures that are relevant for generic promotion and higher generic use. On the supply-side, key policy measures include generic drug marketing regulation that facilitates market entry soon after patent expiration, reference pricing, the pricing of branded originator products, and the degree of price competition in pharmaceutical markets. On the demand-side, measures typically encompass influencing prescribing and dispensing patterns as well as introducing a co-payment structure for consumers/patients that takes into consideration the difference in cost between branded and generic medicines. Quality of generic medicines is a pre-condition for all other measures discussed to take effect. The paper concludes by offering a list of policy options for decision-makers in Central and Eastern European economies in transition. PMID:12187525

  10. A generic process template for continuous pharmaceutical production

    DEFF Research Database (Denmark)

    Singh, Ravendra; Rozada-Sanches, Raquel; Dean, William;

    2012-01-01

    In the work reported here, a conceptual generic continuous process template for pharmaceutical production is presented. The template is demonstrated on a nitro reduction case study that should in principle be generic such that it can handle a series of substrates with similar molecular functional......In the work reported here, a conceptual generic continuous process template for pharmaceutical production is presented. The template is demonstrated on a nitro reduction case study that should in principle be generic such that it can handle a series of substrates with similar molecular...

  11. Patients' attitude about generics –Bulgarian perspective

    Directory of Open Access Journals (Sweden)

    Hristina Lebanova

    2012-01-01

    Full Text Available OBJECTIVE: The aim of the present study is to investigate (1 what is the patients' attitude towards and (2 preferences to use generic medicines in Bulgaria and (3 which are the main factors influencing their opinion.METHODS: Using pseudo-randomization we select a sample of 225 participants, men and women from general population, patients in community pharmacies. For our survey we used a standardized self-questionnaire of ten points. The influence of sex, age, education, medical history, knowledge of generic drugs and experience with generic substitution and medicines was examined through Chi-square tests.RESULTS: The results show that 74% of the participants seemed not to be informed on generic drugs and 26% received valuable and relevant information from their general practitioner or pharmacist. 94% believed that generic medicines are inferior to brand medicines on quality, safety and efficacy.CONCLUSIONS: The main reason for almost all the participants (94% to prefer original medicines, over generics is the insufficient information, they have. The core factors forming patients' opinion and expectations for generic drugs are medical professionals' recommendation and previous experience. The main advantages of the generics according to the participants in the study are the lower price and better accessibility. The results raise the issue of the awareness and level knowledge about generic medicines and the rational drug use in the general population.

  12. Brand loyalty, patients and limited generic medicines uptake.

    Science.gov (United States)

    Costa-Font, Joan; Rudisill, Caroline; Tan, Stefanie

    2014-06-01

    The sluggish development of European generic drug markets depends heavily on demand side factors, and more specifically, patients' and doctors' loyalty to branded products. Loyalty to originator drugs, to the point where originator prices rise upon generic entry has been described as the 'generics paradox'. Originator loyalty can emerge for a plethora of reasons; including costs, perceptions about quality and physician advice. We know very little about the behavioural underpinnings of brand loyalty from the consumer or patient standpoint. This paper attempts to test the extent to which patients are brand loyal by drawing upon Spain's 2002 Health Barometer survey as it includes questions about consumer acceptance of generics in a country with exceptionally low generic uptake and substitution at the time of the study. Our findings suggest that at least 13% of the population would not accept generics as substitutes to the originator. These results confirm evidence of brand loyalty for a minority. Alongside high levels of awareness of generics, we find that low cost-sharing levels explain consumer brand loyalty but their impact on acceptance of generic substitution is very small. Higher cost-sharing and exempting fewer patients from cost-sharing have the potential to encourage generic acceptance. PMID:24573104

  13. Towards using a generic robot as training partner

    DEFF Research Database (Denmark)

    Sørensen, Anders Stengaard; Savarimuthu, Thiusius Rajeeth; Nielsen, Jacob;

    2014-01-01

    In this paper, we demonstrate how a generic industrial robot can be used as a training partner, for upper limb training. The motion path and human/robot interaction of a non-generic upper-arm training robot is transferred to a generic industrial robot arm, and we demonstrate that the robot arm can...... implement the same type of interaction, but can expand the training regime to include both upper arm and shoulder training. We compare the generic robot to two affordable but custom-built training robots, and outline interesting directions for future work based on these training robots....

  14. Generic medicine pricing in Europe: current issues and future perspective.

    Science.gov (United States)

    Simoens, Steven

    2008-01-01

    This editorial discusses a number of trends affecting the pricing of generic medicines in Europe. With respect to pricing, recent evidence has emerged that European generic medicine manufacturers face competition from Indian manufacturers; that the price level of generic medicines varies substantially between European countries; and that generic medicine manufacturers engage in competition by discount rather than price competition in France, The Netherlands and the UK. These trends suggest that there may be scope for further reducing the prices of generic medicines in several countries. In relation to reference pricing, most European countries have incorporated market incentives within reference pricing systems with a view to promoting price competition. The European experience indicates that the generic medicines industry delivers competitive prices under a reference pricing system if demand-side policies are in place that stimulate physicians, pharmacists and patients to use generic medicines. Finally, caution needs to be exercised when focusing on the drivers of generic medicine pricing as these drivers not only vary between countries, but may also vary within a country. Manufacturers of originator and generic medicines do not take a single pricing approach following patent expiry, but vary their pricing strategy from molecule to molecule. PMID:19450118

  15. Anatomical features and clinical relevance of a persistent trigeminal artery

    Science.gov (United States)

    Alcalá-Cerra, Gabriel; Tubbs, R S; Niño-Hernández, Lucía M

    2012-01-01

    Background: Although persistent trigeminal artery (PTA) is uncommonly identified, knowledge of this structure is essential for clinicians who interpret cranial imaging, perform invasive studies of the cerebral vasculature, and operate this region. Methods: A review of the medical literature using standard search engines was performed to locate articles regarding the PTA, with special attention with anatomical descriptions. Results: Although anatomical reports of PTA anatomy are very scarce, those were analyzed to describe in detail the current knowledge about its anatomical relationships and variants. Additionally, the embryology, classification, clinical implications, and imaging modalities of this vessel are extensively discussed. Conclusions: Through a comprehensive review of isolated reports of the PTA, the clinician can better understand and treat patients with such an anatomical derailment. PMID:23087827

  16. Anatomical terminology and nomenclature: past, present and highlights.

    Science.gov (United States)

    Kachlik, David; Baca, Vaclav; Bozdechova, Ivana; Cech, Pavel; Musil, Vladimir

    2008-08-01

    The anatomical terminology is a base for medical communication. It is elaborated into a nomenclature in Latin. Its history goes back to 1895, when the first Latin anatomical nomenclature was published as Basiliensia Nomina Anatomica. It was followed by seven revisions (Jenaiensia Nomina Anatomica 1935, Parisiensia Nomina Anatomica 1955, Nomina Anatomica 2nd to 6th edition 1960-1989). The last revision, Terminologia Anatomica, (TA) created by the Federative Committee on Anatomical Terminology and approved by the International Federation of Associations of Anatomists, was published in 1998. Apart from the official Latin anatomical terminology, it includes a list of recommended English equivalents. In this article, major changes and pitfalls of the nomenclature are discussed, as well as the clinical anatomy terms. The last revision (TA) is highly recommended to the attention of not only teachers, students and researchers, but also to clinicians, doctors, translators, editors and publishers to be followed in their activities. PMID:18488135

  17. Dissimilarity-based classification of anatomical tree structures

    DEFF Research Database (Denmark)

    Sørensen, Lauge Emil Borch Laurs; Lo, Pechin Chien Pau; Dirksen, Asger; Petersen, Jens; de Bruijne, Marleen

    between the branch feature vectors representing those trees. Hereby, localized information in the branches is collectively used in classification and variations in feature values across the tree are taken into account. An approximate anatomical correspondence between matched branches can be achieved by......, as well as anatomical features to characterize each branch, an area under the receiver operating characteristic curve of 0.912 is achieved. This is significantly better than computing the average WA%....

  18. Dissimilarity-based classification of anatomical tree structures

    DEFF Research Database (Denmark)

    Sørensen, Lauge Emil Borch Laurs; Lo, Pechin Chien Pau; Dirksen, Asger; Petersen, Jens; de Bruijne, Marleen

    2011-01-01

    between the branch feature vectors representing those trees. Hereby, localized information in the branches is collectively used in classification and variations in feature values across the tree are taken into account. An approximate anatomical correspondence between matched branches can be achieved by......, as well as anatomical features to characterize each branch, an area under the receiver operating characteristic curveof 0.912 is achieved. This is significantly better than computing the average WA%....

  19. Ultrasound of the rotator cuff with MRI and anatomic correlation

    International Nuclear Information System (INIS)

    Magnetic resonance imaging and high-resolution ultrasound (US) are frequently used for the detection of rotator cuff tears. The diagnostic yield of US is influenced by several factors as technique, knowledge of the imaging characteristics of anatomic and pathologic findings and of pitfalls. The purpose of this article is to illustrates that the standardized high-resolution US examination of the shoulder covers the entire rotator cuff and correlates with MR imaging and anatomic sections

  20. Identification of Salicornia population: Anatomical characterization and RAPD fingerprinting

    OpenAIRE

    Milić Dubravka; Luković Jadranka; Đan Mihajla; Zorić Lana; Obreht Dragana; Veselić Sanja; Anačkov G.; Petanidou Theodora

    2011-01-01

    Anatomical and Random Amplified Polymorphic DNA (RAPD) analysis of two typical populations of Salicornia europaea from Montenegro and Greece (Lesvos), one typical population of S. ramosissima from Spain and one population that belongs to the Salicornia genus from Serbia, was undertaken to develop a new strategy for identifying Salicornia plants. Anatomical variability and differentiation were examined using Principal Component Analysis (PCA) and Multivariate Discriminant Function Analys...

  1. Anatomic Dead Space Cannot Be Predicted by Body Weight

    OpenAIRE

    Brewer, Lara M.; Orr, Joseph A.

    2007-01-01

    Anatomic, airway, or tracheal, dead space is the part of the tidal volume that does not participate in gas exchange. Knowledge of the size of the dead space is important for proper mechanical ventilation, especially if small tidal volumes are used. Respiratory and medical textbooks state that anatomic dead space can be estimated from the patient’s body weight. Specifically, these references suggest dead space can be predicted using a relationship of one milliliter per pound of body weight. Us...

  2. Anatomic Double-Bundle Posterior Cruciate Ligament Reconstruction

    OpenAIRE

    Chahla, Jorge; Nitri, Marco; Civitarese, David; Dean, Chase S.; Moulton, Samuel G.; LaPrade, Robert F.

    2016-01-01

    The posterior cruciate ligament (PCL) is known to be the main posterior stabilizer of the knee. Anatomic single-bundle PCL reconstruction, focusing on reconstruction of the larger anterolateral bundle, is the most commonly performed procedure. Because of the residual posterior and rotational tibial instability after the single-bundle procedure and the inability to restore the normal knee kinematics, an anatomic double-bundle PCL reconstruction has been proposed in an effort to re-create the n...

  3. Detection and Analysis of Statistical Differences in Anatomical Shape

    OpenAIRE

    Golland, Polina; Grimson, W. Eric L.; Martha E. Shenton; Kikinis, Ron

    2005-01-01

    We present a computational framework for image-based analysis and interpretation of statistical differences in anatomical shape between populations. Applications of such analysis include understanding developmental and anatomical aspects of disorders when comparing patients vs. normal controls, studying morphological changes caused by aging, or even differences in normal anatomy, for example, differences between genders. Once a quantitative description of organ shape is extracted from input i...

  4. Anatomic anterior cruciate ligament reconstruction using an individualized approach

    Directory of Open Access Journals (Sweden)

    Carola F. van Eck

    2014-01-01

    Full Text Available Anterior cruciate ligament (ACL reconstruction is one of the most commonly performed orthopaedic procedures. Recently, there has been a shift in interest towards reconstruction techniques that more closely restore the native anatomy of the ACL. This review paper discusses our approach to individualized anatomic ACL reconstruction, including the anatomy of the ACL, the physical exam, imaging modalities, the surgical technique for anatomic reconstruction including pre- and intraoperative considerations and our postoperative rehabilitation protocol.

  5. The linguistic roots of Modern English anatomical terminology.

    Science.gov (United States)

    Turmezei, Tom D

    2012-11-01

    Previous research focusing on Classical Latin and Greek roots has shown that understanding the etymology of English anatomical terms may be beneficial for students of human anatomy. However, not all anatomical terms are derived from Classical origins. This study aims to explore the linguistic roots of the Modern English terminology used in human gross anatomy. By reference to the Oxford English Dictionary, etymologies were determined for a lexicon of 798 Modern English gross anatomical terms from the 40(th) edition of Gray's Anatomy. Earliest traceable language of origin was determined for all 798 terms; language of acquisition was determined for 747 terms. Earliest traceable languages of origin were: Classical Latin (62%), Classical Greek (24%), Old English (7%), Post-Classical Latin (3%), and other (4%). Languages of acquisition were: Classical Latin (42%), Post-Classical Latin (29%), Old English (8%), Modern French (6%), Classical Greek (5%), Middle English (3%), and other (7%). While the roots of Modern English anatomical terminology mostly lie in Classical languages (accounting for the origin of 86% of terms), the anatomical lexicon of Modern English is actually much more diverse. Interesting and perhaps less familiar examples from these languages and the methods by which such terms have been created and absorbed are discussed. The author suggests that awareness of anatomical etymologies may enhance the enjoyment and understanding of human anatomy for students and teachers alike. PMID:22461143

  6. Alternatives to quintessence model building

    International Nuclear Information System (INIS)

    We discuss the issue of toy model building for the dark energy component of the universe. Specifically, we consider two generic toy models recently proposed as alternatives to quintessence models, respectively known as Cardassian expansion and the Chaplygin gas. We show that the former is entirely equivalent to a class of quintessence models. We determine the observational constraints on the latter, coming from recent supernovae results and from the shape of the matter power spectrum. As expected, these restrict the model to a behavior that closely matches that of a standard cosmological constant Λ

  7. [The nerves of the face: anatomical sample in wax in the Delmas-Orfila-Rouvière Museum in Paris].

    Science.gov (United States)

    Drifi, F; Le Floch-Prigent, P

    2009-01-01

    The aim of the study was to check the anatomical veracity of the model of wax no. 262, from the Delmas, Orfila and Rouvière museums, 45, rue des Saints Pères, Paris 6th, made by Tramond M.D., entitled "nerves of the face". We successively took several numerical photographs with several view angles; anatomically described the nerves of the face as they were represented on this model; correlated the anatomical veracity of this representation with the classical, textbooks' data; approached the technical bases of fabrication; and collected successive photographs of the model every 5 degrees , all along 180 degrees , thus allowing an animated rotation on computer, using the QuickTime Virtual Reality program. The oversize of the model excluded a set on a real human skeleton. The building technique of the model was deduced from known data but could not be completely reported. The anatomical veracity of the sample was excellent. The difficulties of realization in wax of an oversized model of the nerves of the human face were solved in the late 19th century, in Paris by Tramond's factory. They remained unequalled. PMID:19819177

  8. Generic small modular reactor plant design.

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, Tom Goslee,; Cipiti, Benjamin B.; Jordan, Sabina Erteza; Baum, Gregory A.

    2012-12-01

    This report gives an overview of expected design characteristics, concepts, and procedures for small modular reactors. The purpose of this report is to provide those who are interested in reducing the cost and improving the safety of advanced nuclear power plants with a generic design that possesses enough detail in a non-sensitive manner to give merit to their conclusions. The report is focused on light water reactor technology, but does add details on what could be different in a more advanced design (see Appendix). Numerous reactor and facility concepts were used for inspiration (documented in the bibliography). The final design described here is conceptual and does not reflect any proposed concept or sub-systems, thus any details given here are only relevant within this report. This report does not include any design or engineering calculations.

  9. A Generic Solution Approach to Nurse Rostering

    DEFF Research Database (Denmark)

    Hansen, Anders Dohn; Mason, Andrew; Ryan, David

    , which is solved in a branch-and-price framework. Columns of the set partitioning problem are generated dynamically and branch-and-bound is used to enforce integrality. The column generating subproblem is modeled in three stages that utilize the inherent structure of roster-lines. Some important features......In this report, we present a solution approach to the nurse rostering problem. The problem is defined by a generic model that is able to capture close to all of the problem characteristics that we have seen in the literature and in the realistic problems at hand. The model is used directly in the...... solution algorithm which gives a very versatile solution method. The method at the same time is constructed to exploit a number of problem specific features and thereby we have a both versatile and efficient solution method. The approach presented uses a set partitioning model of the rostering problem...

  10. Laminated wave turbulence: Generic algorithms iii

    Science.gov (United States)

    Kartashova, Elena; Kartashov, Alexey

    2007-07-01

    Model of laminated wave turbulence allows to study statistical and discrete layers of turbulence in the frame of the same model. Statistical layer is described by Zakharov-Kolmogorov energy spectra in the case of irrational enough dispersion function. Discrete layer is covered by some system(s) of Diophantine equations while their form is determined by wave dispersion function. This presents a very special computational challenge to solve Diophantine equations in many variables, usually 6 to 8, in high degrees, say 16, in integers of order 1016 and more. Generic algorithms for solving this problem in the case of irrational dispersion function have been presented in our previous papers (corresponds to many types of water waves). In this paper, we present a new algorithm for the case of rational dispersion functions (atmospheric planetary waves, drift waves, etc.)

  11. A generic hydroeconomic model to assess future water scarcity

    Science.gov (United States)

    Neverre, Noémie; Dumas, Patrice

    2015-04-01

    We developed a generic hydroeconomic model able to confront future water supply and demand on a large scale, taking into account man-made reservoirs. The assessment is done at the scale of river basins, using only globally available data; the methodology can thus be generalized. On the supply side, we evaluate the impacts of climate change on water resources. The available quantity of water at each site is computed using the following information: runoff is taken from the outputs of CNRM climate model (Dubois et al., 2010), reservoirs are located using Aquastat, and the sub-basin flow-accumulation area of each reservoir is determined based on a Digital Elevation Model (HYDRO1k). On the demand side, agricultural and domestic demands are projected in terms of both quantity and economic value. For the agricultural sector, globally available data on irrigated areas and crops are combined in order to determine irrigated crops localization. Then, crops irrigation requirements are computed for the different stages of the growing season using Allen (1998) method with Hargreaves potential evapotranspiration. Irrigation water economic value is based on a yield comparison approach between rainfed and irrigated crops. Potential irrigated and rainfed yields are taken from LPJmL (Blondeau et al., 2007), or from FAOSTAT by making simple assumptions on yield ratios. For the domestic sector, we project the combined effects of demographic growth, economic development and water cost evolution on future demands. The method consists in building three-blocks inverse demand functions where volume limits of the blocks evolve with the level of GDP per capita. The value of water along the demand curve is determined from price-elasticity, price and demand data from the literature, using the point-expansion method, and from water costs data. Then projected demands are confronted to future water availability. Operating rules of the reservoirs and water allocation between demands are based on

  12. Design Buildings Optimally: A Lifecycle Assessment Approach

    KAUST Repository

    Hosny, Ossama

    2013-01-01

    This paper structures a generic framework to support optimum design for multi-buildings in desert environment. The framework is targeting an environmental friendly design with minimum lifecycle cost, using Genetic Algorithms (Gas). GAs function through a set of success measures which evaluates the design, formulates a proper objective, and reflects possible tangible/intangible constraints. The framework optimizes the design and categorizes it under a certain environmental category at minimum Life Cycle Cost (LCC). It consists of three main modules: (1) a custom Building InformationModel (BIM) for desert buildings with a compatibility checker as a central interactive database; (2) a system evaluator module to evaluate the proposed success measures for the design; and (3) a GAs optimization module to ensure optimum design. The framework functions through three levels: the building components, integrated building, and multi-building levels. At the component level the design team should be able to select components in a designed sequence to ensure compatibility among various components, while at the building level; the team can relatively locate and orient each individual building. Finally, at the multi-building (compound) level the whole design can be evaluated using success measures of natural light, site capacity, shading impact on natural lighting, thermal change, visual access and energy saving. The framework through genetic algorithms optimizes the design by determining proper types of building components and relative buildings locations and orientations which ensure categorizing the design under a specific category or meet certain preferences at minimum lifecycle cost.

  13. Generic Skills from Qur'anic Perspective

    Directory of Open Access Journals (Sweden)

    Siddig Ahmad

    2012-06-01

    Full Text Available Generic skills are defined as a set of skills that are directly related and needed for the working environment. Employers prefer to recruit officials who are competent in interpersonal communication, leadership skill, team work, oral and written skills. They are reluctant to employ graduates lacking certain necessary skills. This reveals the fact that there is a serious gap between the skills that are required by the employers and the skills that the graduates possess. Therefore, this research is focused on five aspects of generic skills namely; communication, team work, problem solving, lifelong learning and self-esteem. From Qur’anic perspective, the same terms have been used except minor differences in using various terms. The thematic approach is used when discussing these aspects from the Qur’an. The findings showed that the ways of effective communication are represented by terms of qawl sadid, qawl ma`ruf, qawl baligh, qawl maysur, qawl karim and qawl layyin. For collective work, ta`aruf and tafahum, as the pre-requisites, should be practiced via ta`awun and takaful. For problem solving, four methods are adapted from the Qur’an such as reflection of the past, observation, demonstration and asking questions. For lifelong learning, the establishment of learning institutions and the self-motivation of learners are two pre-requisites that should be undertaken for its accomplishment. They could be practiced through open learning system, consultation and hands-on learning. Last but not least, for personality development could be built up through physical training, spiritual training and mental training.

  14. Building 2000

    International Nuclear Information System (INIS)

    This is the second volume of Building 2000, a pilot project of the Commission's R and D-programme 'Solar Energy Applications to Buildings' with the purpose of encouraging the adoption of solar architecture in large buildings. In this second rich illustrated volume the results of the design studies illustrating passive solar architecture in buildings in the European Community are presented in particular for the building categories as mentioned in the subtitle. In the first volume, a similar series of studies is presented for the building categories: schools, laboratories and universities, and sports and educational centres. Several Design Support Workshops were organized during the Building 2000 programme during which Building 2000 design teams could directly exchange ideas with the various design advice experts represented at these workshops. In the second part of the Building 2000 final report a summary of a selection of many reports is presented (11 papers), as produced by Design Support experts. Most of the design support activities resulted in changes of the various designs, as have been reported by the design teams in the brochures presented in the first part of this book. It is to be expected that design aids and simulation tools for passive solar options, daylighting concepts, comfort criteria etc., will be utilized more frequently in the future. This will result in a better exchange of information between the actual design practitioners and the European R and D community. This technology transfer will result in buildings with a higher quality with respect to energy and environmental issues

  15. Scientific considerations in the review and approval of generic enoxaparin in the United States.

    Science.gov (United States)

    Lee, Sau; Raw, Andre; Yu, Lawrence; Lionberger, Robert; Ya, Naiqi; Verthelyi, Daniela; Rosenberg, Amy; Kozlowski, Steve; Webber, Keith; Woodcock, Janet

    2013-03-01

    In 2010, the US Food and Drug Administration (FDA) approved a generic low-molecular-weight heparin without clinical safety or efficacy data under the Abbreviated New Drug Application (ANDA) pathway. To enable a determination of active ingredient sameness of generic and innovator enoxaparin products, the FDA developed a scientifically rigorous approach based on five criteria: first, equivalence of physicochemical properties; second, equivalence of heparin source material and mode of depolymerization; third, equivalence in disaccharide building blocks, fragment mapping and sequence of oligosaccharide species; fourth, equivalence in biological and biochemical assays; and finally, equivalence of in vivo pharmacodynamic profile. In addition to fulfillment of these criteria, FDA also used in vitro, ex vivo and model animal data to ensure there was no increased immunogenicity risk of the generic enoxaparin product relative to the brand name product. The approval of the highly complex enoxaparin product using this framework under the ANDA pathway represents a major development. It also suggests that analytical and scientific advancements may in certain cases allow the elimination of unnecessary in vivo testing in animals and humans. PMID:23471071

  16. Generic Attributes as Espoused Theory: The Importance of Context

    Science.gov (United States)

    Jones, Anna

    2009-01-01

    There has been considerable interest in generic attributes in higher education for over a decade and yet while generic skills or attributes are an important aspect of policy, there is often a lack of consistency between beliefs about the importance of these skills and attributes and the degree to which exist in teaching practice. There has been an…

  17. Systematic identification of crystallization kinetics within a generic modelling framework

    DEFF Research Database (Denmark)

    Abdul Samad, Noor Asma Fazli Bin; Meisler, Kresten Troelstrup; Gernaey, Krist; von Solms, Nicolas; Gani, Rafiqul

    A systematic development of constitutive models within a generic modelling framework has been developed for use in design, analysis and simulation of crystallization operations. The framework contains a tool for model identification connected with a generic crystallizer modelling tool-box, a tool...

  18. 40 CFR 721.10015 - Halogenated benzimidazole (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Halogenated benzimidazole (generic... Specific Chemical Substances § 721.10015 Halogenated benzimidazole (generic). (a) Chemical substance and... benzimidazole (PMN P-01-110) is subject to reporting under this section for the significant new uses...

  19. Generic simplicity of certain families of almost commutative algebras

    CERN Document Server

    Tikaradze, Akaki

    2011-01-01

    We discuss generic simplicity and Bernstein's inequality for families of almost commutative algebras. We also relate completions of infinitesimal Hecke algebras of sl_2 to noncommutative deformations of Kleinian singularities of type D of Crawley-Boevey and Holland. As a consequence, we show an analogue of Bernstein's inequality and simplicity of generic maximal primitive quotients of these algebras.

  20. Defining and Assessing Generic Competencies in Australian Universities: Ongoing Challenges

    Science.gov (United States)

    Chapman, Elaine; O'Neill, Marnie

    2010-01-01

    In this paper, we discuss ongoing challenges in defining and assessing generic competencies in Australian universities. The paper begins with a discussion of factors that led to, and later fuelled, the focus on generic competencies in Australian higher education. Broad constructs that have underpinned research and practice in the field are then…

  1. 78 FR 22553 - Generic Drug Facilities, Sites, and Organizations

    Science.gov (United States)

    2013-04-16

    ... Web site at the following addresses: eSubmitter tool: http://www.fda.gov/ForIndustry/FDAeSubmitter... provided through self-identification enables quick, accurate, and reliable surveillance of generic drugs... HUMAN SERVICES Food and Drug Administration Generic Drug Facilities, Sites, and Organizations...

  2. Generic ICT Skills Profiles: Future Skills for Tomorrow's World.

    Science.gov (United States)

    International Co-operation Europe Ltd. (ICEL), Brussels, Belgium.

    This document describes generic skills profiles relevant to key jobs in information and communications technology (ICT). The profiles cover the main job areas for which the ICT industry is experiencing skills shortages. These types of information are provided for 18 generic job profiles: job description (vision, role, lifestyle); examples of job…

  3. 40 CFR 721.10036 - Acetaldehyde based polymer (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Acetaldehyde based polymer (generic... Specific Chemical Substances § 721.10036 Acetaldehyde based polymer (generic). (a) Chemical substance and... based polymer (PMN P-02-406) is subject to reporting under this section for the significant new...

  4. Generic medicines: Perceptions of Physicians in Basrah, Iraq

    Directory of Open Access Journals (Sweden)

    Adheed Khalid Sharrad

    2009-08-01

    Full Text Available BackgroundThe use of cheaper generic medicines is a strategy promotedin many countries to reduce rising health care costs. The aimof this study was to explore factors affecting generic medicineprescribing by physicians in Basrah, Iraq.MethodologyA purposive sample of ten physicians practicing in Basrahwas interviewed using a semi-structured interview guide.ResultsAnalysis of the interviews identified seven major themes:medicine prescribing practice, knowledge of therapeuticequivalency of generic medicine, patients’ acceptance ofgeneric medicine, counterfeit medicine, drug informationsource and effect of drug advertising on medicines choice,brand substitution practice by community pharmacists, and,finally strategies to improve generic medicine usefulness.Participants identified helpful strategies to increase genericprescribing including; physician and patient education ongeneric medicine; persuading physicians about the safety andefficacy of generic medicines; and finally educating seniormedical students on generic prescribing.ConclusionThe data suggest that participants were enthusiasticabout prescribing generic medicines. However physiciansinsist that pharmacists should not be allowed tosubstitute generic drugs without prior approval ofdoctors.

  5. 40 CFR 721.10046 - Polyaromatic amine phosphate (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Polyaromatic amine phosphate (generic... Specific Chemical Substances § 721.10046 Polyaromatic amine phosphate (generic). (a) Chemical substance and... amine phosphate (PMN P-02-747) is subject to reporting under this section for the significant new...

  6. Generic medicines: solutions for a sustainable drug market?

    Science.gov (United States)

    Dylst, Pieter; Vulto, Arnold; Godman, Brian; Simoens, Steven

    2013-10-01

    Generic medicines offer equally high-quality treatment as originator medicines do at much lower prices. As such, they represent a considerable opportunity for authorities to obtain substantial savings. At the moment, the pharmaceutical landscape is changing and many pharmaceutical companies have altered their development and commercial strategies, combining both originator and generic divisions. In spite of this, the generic medicines industry is currently facing a number of challenges: delayed market access; the limited price differential with originator medicines; the continuous downwards pressure on prices; and the negative perception regarding generic medicines held by some key stakeholder groups. This could jeopardize the long-term sustainability of the generic manufacturing industry. Therefore, governments must focus on demand-side policies, alongside policies to accelerate market access, as the generic medicines industry will only be able to deliver competitive and sustainable prices if they are ensured a high volume. In the future, the generic medicines industry will increasingly look to biosimilars and generic versions of orphan drugs to expand their business. PMID:23846572

  7. 17 CFR 230.135a - Generic advertising.

    Science.gov (United States)

    2010-04-01

    ... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Generic advertising. 230.135a Section 230.135a Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION GENERAL RULES AND REGULATIONS, SECURITIES ACT OF 1933 General § 230.135a Generic advertising. (a) For the purposes only...

  8. Need for multicriteria evaluation of generic drug policies.

    Science.gov (United States)

    Kaló, Zoltán; Holtorf, Anke-Peggy; Alfonso-Cristancho, Rafael; Shen, Jie; Ágh, Tamás; Inotai, András; Brixner, Diana

    2015-03-01

    Policymakers tend to focus on improving patented drug policies because they are under pressure from patients, physicians, and manufacturers to increase access to novel therapies. The success of pharmaceutical innovation over the last few decades has led to the availability of many off-patent drugs to treat disease areas with the greatest public health need. Therefore, the success of public health programs in improving the health status of the total population is highly dependent on the efficiency of generic drug policies. The objective of this article was to explore factors influencing the true efficiency of generic prescription drug policies in supporting public health initiatives in the developed world. Health care decision makers often assess the efficiency of generic drug policies by the level of price erosion and market share of generics. Drug quality, bioequivalence, in some cases drug formulations, supply reliability, medical adherence and persistence, health outcomes, and nondrug costs, however, are also attributes of success for generic drug policies. Further methodological research is needed to measure and improve the efficiency of generic drug policies. This also requires extension of the evidence base of the impact of generic drugs, partly based on real-world evidence. Multicriteria decision analysis may assist policymakers and researchers to evaluate the true value of generic drugs. PMID:25773570

  9. Laboratory Building.

    Energy Technology Data Exchange (ETDEWEB)

    Herrera, Joshua M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-03-01

    This report is an analysis of the means of egress and life safety requirements for the laboratory building. The building is located at Sandia National Laboratories (SNL) in Albuquerque, NM. The report includes a prescriptive-based analysis as well as a performance-based analysis. Following the analysis are appendices which contain maps of the laboratory building used throughout the analysis. The top of all the maps is assumed to be north.

  10. Generic substitution: micro evidence from register data in Norway.

    Science.gov (United States)

    Dalen, Dag Morten; Furu, Kari; Locatelli, Marilena; Strøm, Steinar

    2011-02-01

    The importance of prices, doctor and patient characteristics, and market institutions for the likelihood of choosing generic drugs instead of the more expensive original brand-name version are examined. Using an extensive dataset extracted from The Norwegian Prescription Database containing all prescriptions dispensed to individuals in February 2004 and 2006 on 23 different drugs (chemical substances) in Norway, we find strong evidence for the importance of both doctor and patient characteristics for the choice probabilities. The price difference between brand and generic versions and insurance coverage both affect generic substitution. Moreover, controlling for the retail chain affiliation of the dispensing pharmacy, we find that pharmacies play an important role in promoting generic substitution. In markets with more recent entry of generic drugs, brand-name loyalty proves to be much stronger, giving less explanatory power to our demand model. PMID:20213182

  11. Patients' concern about their medicine after a generic switch

    DEFF Research Database (Denmark)

    Østergaard Rathe, Jette; Søndergaard, Jens; Jarbøl, Dorte E; Hallas, Jesper; Andersen, Morten

    2014-01-01

    treatment. We also included general beliefs about medicine (BMQ), views on generic medicine and confidence in the health-care system. The information about the patients' generic switch was obtained from a prescription database and not provided by the patients. Data were analysed using linear regression......PURPOSE: This study aims to investigate the possible association between patients' concerns about their medicine and generic switch. METHODS: Cross-sectional survey was carried out comprising responses from 2217 randomly selected persons aged 20 years or older and living in the Region of Southern...... Denmark, who had redeemed generically substitutable drugs in September 2008. For each patient, we focused on the purchase of one generically substitutable drug (index drug). We applied the specific concerns subscale from the Beliefs about Medicine Questionnaire (BMQ) to analyse lack of confidence in...

  12. An audit of generic prescribing in a general surgical department.

    LENUS (Irish Health Repository)

    Gleeson, M

    2013-01-17

    BACKGROUND: The Health Service Executive introduced a generic prescription policy to reduce costs. Despite this, generic prescription rates remain low. AIM: To audit in-patient prescription practice in a single surgical department and identify potential savings which could be realised by adherence to the generic prescribing policy. METHODS: Surgical in-patient charts were obtained at the point of discharge and their drug prescription information was recorded. RESULTS: 51 % of prescriptions involved a trade-name prescription where an appropriate generic equivalent existed. The cost implications for hospital and community patients were found to be greatly affected by substitution policies that exist at hospital pharmacy level. CONCLUSION: There is a need to promote greater adherence to generic prescribing amongst hospital doctors in line with international best practice. It can have a positive impact in terms of safe prescribing and can have cost implications at both hospital and community level.

  13. Generic Argillite/Shale Disposal Reference Case

    Energy Technology Data Exchange (ETDEWEB)

    Zheng, Liange; Colon, Carlos Jové; Bianchi, Marco; Birkholzer, Jens

    2014-08-08

    properties (parameters) used in these models are different, which not only make inter-model comparisons difficult, but also compromise the applicability of the lessons learned from one model to another model. The establishment of a reference case would therefore be helpful to set up a baseline for model development. A generic salt repository reference case was developed in Freeze et al. (2013) and the generic argillite repository reference case is presented in this report. The definition of a reference case requires the characterization of the waste inventory, waste form, waste package, repository layout, EBS backfill, host rock, and biosphere. This report mainly documents the processes in EBS bentonite and host rock that are potentially important for performance assessment and properties that are needed to describe these processes, with brief description other components such as waste inventory, waste form, waste package, repository layout, aquifer, and biosphere. A thorough description of the generic argillite repository reference case will be given in Jové Colon et al. (2014).

  14. Anatomical Disregard as a Risk Factor in Thoracic Surgery.

    Directory of Open Access Journals (Sweden)

    Arribalzaga, Eduardo B.

    2012-06-01

    Full Text Available The anatomy plays a significant role in medical education, allowing a progressive appropriate professional development. Because of different factors adverse events (AE occur, where patient’s safety is achieved by surgical knowledge, prevention and elimination of risk factors. Absence or incorrect knowledge of the anatomical basis at the beginning of the graduate studies specialization are factors that alter the surgical patient’s safety, risking his life. The safety checklist in surgery is used to reduce avoidable risks for the patient in the operating room.Objectives: 1. Analyze the anatomic disregard as a risk factor in surgical anatomical processes of the thorax. 2. Evaluate actions to provide greater safety for the patient with thoracic surgical pathology. 3. Evaluate the importance of implementing register systems to improve the quality of care and patient’s safety with thoracic surgical pathology.Retrospective statistical analysis of anatomic disregard as a risk factor contributing to adverse events (AEs in anatomical and surgical procedures of the thorax was performed in the General Surgery Service of the Hospital Aeronáutico Central of Buenos Aires Air (HAC, from October 2009 to April 2011; and a case of anatomical disregard and its clinical-surgical implications was reported, in General Surgery Service of Hospital de Clínicas of Buenos Aires.In the General Surgery Service of HAC, 21 patients (17.64% had AE all (100% preventable. 100% were due to human factors, corresponding to 12 (57.14%, because of ignorance of anatomical region and the rest by other factors: absence of checklist in 7 (58.33% of which 5 (71.43% correspond to the first 9 months of the studied period and 2 (28.57% in the next 9 months. A case of anatomical disregard was reported in the surgical practice of General Surgery Service of Hospital de Clínicas, Buenos Aires where it was because of complications that endangered the patient’s life.The registration

  15. CT following US for possible appendicitis: anatomic coverage

    Energy Technology Data Exchange (ETDEWEB)

    O' Malley, Martin E. [University of Toronto, Princess Margaret Hospital, 3-920, Joint Department of Medical Imaging, Toronto, Ontario (Canada); Alharbi, Fawaz [University of Toronto, Toronto General Hospital, NCSB 1C572, Joint Department of Medical Imaging, Toronto, Ontario (Canada); Qassim University, Department of Medical Imaging, Buraydah, Qassim (Saudi Arabia); Chawla, Tanya P. [University of Toronto, Mount Sinai Hospital, Room 567, Joint Department of Medical Imaging, Toronto, Ontario (Canada); Moshonov, Hadas [University of Toronto, Joint Department of Medical Imaging, Toronto, Ontario (Canada)

    2016-02-15

    To determine superior-inferior anatomic borders for CT following inconclusive/nondiagnostic US for possible appendicitis. Ninety-nine patients with possible appendicitis and inconclusive/nondiagnostic US followed by CT were included in this retrospective study. Two radiologists reviewed CT images and determined superior-inferior anatomic borders required to diagnose or exclude appendicitis and diagnose alternative causes. This ''targeted'' coverage was used to estimate potential reduction in anatomic coverage compared to standard abdominal/pelvic CT. The study group included 83 women and 16 men; mean age 32 (median, 29; range 18-73) years. Final diagnoses were: nonspecific abdominal pain 50/99 (51 %), appendicitis 26/99 (26 %), gynaecological 12/99 (12 %), gastrointestinal 9/99 (10 %), and musculoskeletal 2/99 (2 %). Median dose-length product for standard CT was 890.0 (range, 306.3 - 2493.9) mGy.cm. To confidently diagnose/exclude appendicitis or identify alternative diagnoses, maximum superior-inferior anatomic CT coverage was the superior border of L2-superior border of pubic symphysis, for both reviewers. Targeted CT would reduce anatomic coverage by 30-55 % (mean 39 %, median 40 %) compared to standard CT. When CT is performed for appendicitis following inconclusive/nondiagnostic US, targeted CT from the superior border of L2-superior border of pubic symphysis can be used resulting in significant reduction in exposure to ionizing radiation compared to standard CT. (orig.)

  16. CT following US for possible appendicitis: anatomic coverage

    International Nuclear Information System (INIS)

    To determine superior-inferior anatomic borders for CT following inconclusive/nondiagnostic US for possible appendicitis. Ninety-nine patients with possible appendicitis and inconclusive/nondiagnostic US followed by CT were included in this retrospective study. Two radiologists reviewed CT images and determined superior-inferior anatomic borders required to diagnose or exclude appendicitis and diagnose alternative causes. This ''targeted'' coverage was used to estimate potential reduction in anatomic coverage compared to standard abdominal/pelvic CT. The study group included 83 women and 16 men; mean age 32 (median, 29; range 18-73) years. Final diagnoses were: nonspecific abdominal pain 50/99 (51 %), appendicitis 26/99 (26 %), gynaecological 12/99 (12 %), gastrointestinal 9/99 (10 %), and musculoskeletal 2/99 (2 %). Median dose-length product for standard CT was 890.0 (range, 306.3 - 2493.9) mGy.cm. To confidently diagnose/exclude appendicitis or identify alternative diagnoses, maximum superior-inferior anatomic CT coverage was the superior border of L2-superior border of pubic symphysis, for both reviewers. Targeted CT would reduce anatomic coverage by 30-55 % (mean 39 %, median 40 %) compared to standard CT. When CT is performed for appendicitis following inconclusive/nondiagnostic US, targeted CT from the superior border of L2-superior border of pubic symphysis can be used resulting in significant reduction in exposure to ionizing radiation compared to standard CT. (orig.)

  17. Generic and profile specific feeder stress analysis

    International Nuclear Information System (INIS)

    Flow assisted corrosion (FAC) caused wall thinning has been observed on CANDU feeder pipes. Thinning in general occurs in the first two bends near the Grayloc fitting. In a fitness for service analysis of thinned feeders, the inspected or predicted minimum thicknesses are often used in the stress analysis. The determination of the exact location of the thin spot, axially and circumferentially, is dose intensive during inspection. In view of urgency during an outage to disposition measured thicknesses, two types of stress analysis approaches are developed. Type A analysis, also named here as the 'Average-Minimum-Average' or generic approach provides requirements on minimum wall thickness as well as average wall thickness. The required minimum wall thickness is not location specific and can reside anywhere within the first two bends. It provides great flexibility to disposition feeders with either general or local thinning. On the other hand, Type B analysis is conducted with the exact thickness profile. Type B analysis is performed on feeders which do not pass Type A analysis. The two approaches have been demonstrated in Darlington feeders, where the majority (413 out of 480) of feeders has Type A requirements, while 67 out of 480 have Type B requirements. Type A requirements provide a greater flexibility to disposition local thinning on feeder pipes. (author)

  18. A generic program for multistate protein design.

    Directory of Open Access Journals (Sweden)

    Andrew Leaver-Fay

    Full Text Available Some protein design tasks cannot be modeled by the traditional single state design strategy of finding a sequence that is optimal for a single fixed backbone. Such cases require multistate design, where a single sequence is threaded onto multiple backbones (states and evaluated for its strengths and weaknesses on each backbone. For example, to design a protein that can switch between two specific conformations, it is necessary to to find a sequence that is compatible with both backbone conformations. We present in this paper a generic implementation of multistate design that is suited for a wide range of protein design tasks and demonstrate in silico its capabilities at two design tasks: one of redesigning an obligate homodimer into an obligate heterodimer such that the new monomers would not homodimerize, and one of redesigning a promiscuous interface to bind to only a single partner and to no longer bind the rest of its partners. Both tasks contained negative design in that multistate design was asked to find sequences that would produce high energies for several of the states being modeled. Success at negative design was assessed by computationally redocking the undesired protein-pair interactions; we found that multistate design's accuracy improved as the diversity of conformations for the undesired protein-pair interactions increased. The paper concludes with a discussion of the pitfalls of negative design, which has proven considerably more challenging than positive design.

  19. A generic program for multistate protein design.

    Science.gov (United States)

    Leaver-Fay, Andrew; Jacak, Ron; Stranges, P Benjamin; Kuhlman, Brian

    2011-01-01

    Some protein design tasks cannot be modeled by the traditional single state design strategy of finding a sequence that is optimal for a single fixed backbone. Such cases require multistate design, where a single sequence is threaded onto multiple backbones (states) and evaluated for its strengths and weaknesses on each backbone. For example, to design a protein that can switch between two specific conformations, it is necessary to to find a sequence that is compatible with both backbone conformations. We present in this paper a generic implementation of multistate design that is suited for a wide range of protein design tasks and demonstrate in silico its capabilities at two design tasks: one of redesigning an obligate homodimer into an obligate heterodimer such that the new monomers would not homodimerize, and one of redesigning a promiscuous interface to bind to only a single partner and to no longer bind the rest of its partners. Both tasks contained negative design in that multistate design was asked to find sequences that would produce high energies for several of the states being modeled. Success at negative design was assessed by computationally redocking the undesired protein-pair interactions; we found that multistate design's accuracy improved as the diversity of conformations for the undesired protein-pair interactions increased. The paper concludes with a discussion of the pitfalls of negative design, which has proven considerably more challenging than positive design. PMID:21754981

  20. Retinal image quality assessment using generic features

    Science.gov (United States)

    Fasih, Mahnaz; Langlois, J. M. Pierre; Ben Tahar, Houssem; Cheriet, Farida

    2014-03-01

    Retinal image quality assessment is an important step in automated eye disease diagnosis. Diagnosis accuracy is highly dependent on the quality of retinal images, because poor image quality might prevent the observation of significant eye features and disease manifestations. A robust algorithm is therefore required in order to evaluate the quality of images in a large database. We developed an algorithm for retinal image quality assessment based on generic features that is independent from segmentation methods. It exploits the local sharpness and texture features by applying the cumulative probability of blur detection metric and run-length encoding algorithm, respectively. The quality features are combined to evaluate the image's suitability for diagnosis purposes. Based on the recommendations of medical experts and our experience, we compared a global and a local approach. A support vector machine with radial basis functions was used as a nonlinear classifier in order to classify images to gradable and ungradable groups. We applied our methodology to 65 images of size 2592×1944 pixels that had been graded by a medical expert. The expert evaluated 38 images as gradable and 27 as ungradable. The results indicate very good agreement between the proposed algorithm's predictions and the medical expert's judgment: the sensitivity and specificity for the local approach are respectively 92% and 94%. The algorithm demonstrates sufficient robustness to identify relevant images for automated diagnosis.

  1. Identification of Salicornia population: Anatomical characterization and RAPD fingerprinting

    Directory of Open Access Journals (Sweden)

    Milić Dubravka

    2011-01-01

    Full Text Available Anatomical and Random Amplified Polymorphic DNA (RAPD analysis of two typical populations of Salicornia europaea from Montenegro and Greece (Lesvos, one typical population of S. ramosissima from Spain and one population that belongs to the Salicornia genus from Serbia, was undertaken to develop a new strategy for identifying Salicornia plants. Anatomical variability and differentiation were examined using Principal Component Analysis (PCA and Multivariate Discriminant Function Analysis (MDA. On the basis of the anatomical measurements, the four populations were classified into three groups: one joining the plants from Serbia and Spain, one comprising the Montenegrin group and one comprising the Lesvos group. RAPD analysis indicated that populations from Spain and Serbia were closely related to each other and the Lesvos group was quite different from all the other investigated populations. These results opened up the possibility that the specimens from Serbia belonged to S. ramosissima and not to S. europaea, as reported previously.

  2. Analytical and statistical comparability of generic enoxaparins from the US market with the originator product.

    Science.gov (United States)

    Mourier, Pierre A J; Agut, Christophe; Souaifi-Amara, Hajer; Herman, Fréderic; Viskov, Christian

    2015-11-10

    Low-molecular-weight heparins (LMWHs) are complex anticoagulant drugs, made from heparin porcine mucosa starting material. Enoxaparin sodium manufactured by Sanofi is one of the most widely prescribed LMWHs and has been used since 1993 in the USA. In 2010, US Food and Drug Administration approval for supplying generic enoxaparin was granted to Sandoz and subsequently to Amphastar. Little is known, however, of the differences in composition of these preparations. In this study, samples from several batches of generic enoxaparins were purchased on the US market and analyzed with state of the art methodologies, including disaccharide building blocks quantification, nuclear magnetic resonance (NMR), and a combination of orthogonal separation techniques. Direct high-performance liquid chromatography analysis of the different enoxaparin batches revealed distinct process fingerprints associated with each manufacturer. Disaccharide building block analysis showed differences in the degree of sulfation, the presence of glycoserine derivatives, as well as in proportions of disaccharides. Results were compared by statistical approaches using multivariate analysis with a partial least squares discriminant analysis methodology. The variations were statistically significant and allowed a clear distinction to be made between the enoxaparin batches according to their manufacturer. These results were further confirmed by orthogonal analytical techniques, including NMR, which revealed compositional differences of oligosaccharides both in low- and high-affinity antithrombin fractions of enoxaparin. PMID:26280926

  3. Innovation strategies for generic drug companies: moving into supergenerics.

    Science.gov (United States)

    Ross, Malcolm S F

    2010-04-01

    Pharmaceutical companies that market generic products generally are not regarded as innovators, but rather as companies that produce copies of originator products to be launched at patent expiration. However, many generics companies have developed excellent scientific innovative skills in an effort to circumvent the defense patents of originator companies. More patents per product, in terms of both drug substances (process patents and polymorph patents) and formulations, are issued to generics companies than to companies that are traditionally considered to be 'innovators'. This quantity of issued patents highlights the technical knowledge and skill sets that are available in generics companies. In order to adopt a completely innovative model (ie, the development of NCEs), a generics company would require a completely new set of skills in several fields, including a sufficient knowledge base, project and risk management experience, and capability for clinical data evaluation. However, with relatively little investment, generics companies should be able to progress into the so-called 'supergeneric' drug space - an area of innovation that reflects the existing competencies of both innovative and generics companies. PMID:20373253

  4. Anatomic landmarks for localization of the spinal accessory nerve.

    Science.gov (United States)

    Durazzo, Marcelo D; Furlan, Julio C; Teixeira, Gilberto V; Friguglietti, Celso U M; Kulcsar, Marco A V; Magalhães, Roberto P; Ferraz, Alberto R; Brandão, Lenine G

    2009-05-01

    This anatomical study examines the anatomic topography and landmarks for localization of the spinal accessory nerve (SAN) during surgical dissections in 40 fresh human cadavers (2 females and 38 males; ages from 22 to 89 years with a mean of 60 years). In the submandibular region, the SAN was found anteriorly to the transverse process of the atlas in 77.5% of the dissections. When the SAN crossed the posterior belly of the digastric muscle, the mean distance from the point of crossing to the tendon of the muscle was 1.75 +/- 0.54 cm. Distally, the SAN crossed between the two heads of the SCM muscle in 45% of the dissections and deep to the muscle in 55%. The SAN exited the posterior border of the sternocleidomastoid muscle in a point superior to the nerve point with a mean distance between these two anatomic parameters of 0.97 +/- 0.46 cm. The mean overall extracranial length of the SAN was 12.02 +/- 2.32 cm, whereas the mean length of the SAN in the posterior triangle was 5.27 +/- 1.52 cm. There were 2-10 lymph nodes in the SAN chain. In conclusion, the nerve point is one of the most reliable anatomic landmarks for localization of the SAN in surgical neck dissections. Although other anatomic parameters including the transverse process of the atlas and the digastric muscle can also be used to localize the SAN, the surgeon should be aware of the possibility of anatomic variations of those parameters. Similar to previous investigations, our results suggest that the number of lymph nodes of the SAN chain greatly varies. PMID:19373901

  5. Congenital prosopagnosia: multistage anatomical and functional deficits in face processing circuitry.

    Science.gov (United States)

    Dinkelacker, V; Grüter, M; Klaver, P; Grüter, T; Specht, K; Weis, S; Kennerknecht, I; Elger, C E; Fernandez, G

    2011-05-01

    Face recognition is a primary social skill which depends on a distributed neural network. A pronounced face recognition deficit in the absence of any lesion is seen in congenital prosopagnosia. This study investigating 24 congenital prosopagnosic subjects and 25 control subjects aims at elucidating its neural basis with fMRI and voxel-based morphometry. We found a comprehensive behavioral pattern, an impairment in visual recognition for faces and buildings that spared long-term memory for faces with negative valence. Anatomical analysis revealed diminished gray matter density in the bilateral lingual gyrus, the right middle temporal gyrus, and the dorsolateral prefrontal cortex. In most of these areas, gray matter density correlated with memory success. Decreased functional activation was found in the left fusiform gyrus, a crucial area for face processing, and in the dorsolateral prefrontal cortex, whereas activation of the medial prefrontal cortex was enhanced. Hence, our data lend strength to the hypothesis that congenital prosopagnosia is explained by network dysfunction and suggest that anatomic curtailing of visual processing in the lingual gyrus plays a substantial role. The dysfunctional circuitry further encompasses the fusiform gyrus and the dorsolateral prefrontal cortex, which may contribute to their difficulties in long-term memory for complex visual information. Despite their deficits in face identity recognition, processing of emotion related information is preserved and possibly mediated by the medial prefrontal cortex. Congenital prosopagnosia may, therefore, be a blueprint of differential curtailing in networks of visual cognition. PMID:21120515

  6. Automatic parcellation of human cortical gyri and sulci using standard anatomical nomenclature.

    Science.gov (United States)

    Destrieux, Christophe; Fischl, Bruce; Dale, Anders; Halgren, Eric

    2010-10-15

    Precise localization of sulco-gyral structures of the human cerebral cortex is important for the interpretation of morpho-functional data, but requires anatomical expertise and is time consuming because of the brain's geometric complexity. Software developed to automatically identify sulco-gyral structures has improved substantially as a result of techniques providing topologically correct reconstructions permitting inflated views of the human brain. Here we describe a complete parcellation of the cortical surface using standard internationally accepted nomenclature and criteria. This parcellation is available in the FreeSurfer package. First, a computer-assisted hand parcellation classified each vertex as sulcal or gyral, and these were then subparcellated into 74 labels per hemisphere. Twelve datasets were used to develop rules and algorithms (reported here) that produced labels consistent with anatomical rules as well as automated computational parcellation. The final parcellation was used to build an atlas for automatically labeling the whole cerebral cortex. This atlas was used to label an additional 12 datasets, which were found to have good concordance with manual labels. This paper presents a precisely defined method for automatically labeling the cortical surface in standard terminology. PMID:20547229

  7. Reply to “Introducing International Journal of Anatomical Variations”

    Directory of Open Access Journals (Sweden)

    Potu BK

    2009-07-01

    Full Text Available To the Editor, International Journal of Anatomical Variations:Please accept my heartiest congratulations on your recent opening of International Journal of Anatomical Variations Journal. I have already gone through the articles of first volume. It was surprised to read some of the unique variations published in it. Reading of these variations by vascular surgeons and angiologist will certainly boost their knowledge for better diagnosis and I hope you will continue publishing these types of rare variations. It would be great, if you encourage authors to submit research related articles. It is obvious that you have a wide-open future ahead of you.

  8. Double auricles of the right atrium: a unique anatomic deformity

    Directory of Open Access Journals (Sweden)

    Lampoura Stefania S

    2011-04-01

    Full Text Available Abstract Background Anatomic deviations, especially those detected during the course of an operation, are medically intriguing, as they raise concerns about their clinical significance and putative complications. Case presentation We present, to our knowledge, for the first time a case of an anatomic deviation in the form of a second right atrial auricle in a 70 year-old, coronary bypass-operated male Caucasian patient of Greek origin. No complications were noted intra-or postoperatively. Conclusions A second right atrial auricle was found intraoperatively, without causing any clinical complications, or obstructing the normal course of a surgical procedure.

  9. Anatomical eponyms, Part 2: The other side of the coin.

    Science.gov (United States)

    Olry, Regis

    2014-11-01

    Over a century after they were removed, at least officially, from anatomical terminology, eponyms remain an obviously controversial topic. In the first part of this paper we acted as their defense counsel, aiming to demonstrate that the 1895 first edition of the Nomina Anatomica and subsequently the Federative Committee on Anatomical Terminology (FCAT) probably put the cart before the horse. However, their authors advanced arguments supporting their decision, and it is now time to develop these arguments. Let us now become the public prosecutor of eponyms. PMID:25067796

  10. Building Procurement

    DEFF Research Database (Denmark)

    Andersson, Niclas

    2007-01-01

    ‘The procurement of construction work is complex, and a successful outcome frequently elusive’. With this opening phrase of the book, the authors take on the challenging job of explaining the complexity of building procurement. Even though building procurement systems are, and will remain, complex...... despite this excellent book, the knowledge, expertise, well-articulated argument and collection of recent research efforts that are provided by the three authors will help to make project success less elusive. The book constitutes a thorough and comprehensive investigation of building procurement, which......, which gives the book a challenging contribution to the existing body of knowledge....

  11. ON STAUDE' S NEW GENERIC NAMES FOR AGARICS

    Directory of Open Access Journals (Sweden)

    M. A. DONK

    2015-11-01

    Full Text Available The author concludes that the generic names for agarics first introduced by Staude (1857 have been validly published.When I drew attention to Staude's forgotten "Die Schwamme Mittel-deutschlands" (1857, I felt obliged to conclude that the new generic names for agarics appearing in that work were validly published (Donk, 1949: 319-320, and I still am fully convinced that this conclusion must be upheld. Rogers (1950: 22 submitted that Staude, although referring to Collybia and other genera as G [attungen], did not definitely accept them as genera, since he continued to refer species under them to Agaricus, thereby implying that they were only subgenera or sections; and that Staude, therefore, dit not validly publish these generic names. Rogers's conclusion is untenable for several reasons. If his argumentbecame generally accepted, quite a lot of generic names might be murdered by it: the number of generic names established without simultaneously published new combinations with the new generic name, like those without any mention of species, is considerable. Such an attitude would not only be undesirable from a practical point of view, but would also disregard the declared object of the Code to promote stability of nomenclature. The Code has deliberately and carefully avoided the stipulation that a new generic name requires simultaneously published new combinations; it has even refused to rule that new generic names ought to be associated with binomials, as was stipulated by the former American code! Certainlythis was not done solely to accomodate such special cases as, for example, Tournefortian generic names published after 1753 as an overflow from the pre-binomial period: the decision was for general application. Staude emphatically marked the names in question as generic ones; not only in the introductory pages, but also throughout his more detailed treatment of the agarics he preceded these generic names with "G[attung]" and added generic

  12. Cost assessment of a generic magnetic fusion reactor

    International Nuclear Information System (INIS)

    A generic magnetic fusion reactor model is used to determine the conditions under which electricity generation from fusion would be economically viable. The use of a generic model helps to circumvent problems associated with present perceptions of magnetic configurations. It helps also to decouple those limitations set by generic constraints such as nuclear cross sections from those set by the state of development today. The model shows that only moderate advances are required in reactor characteristics over current designs to make an economically attractive magnetic fusion reactor

  13. Business engineering. Generic Software Architecture in an Object Oriented View

    Directory of Open Access Journals (Sweden)

    Mihaela MURESAN

    2006-01-01

    Full Text Available The generic software architecture offers a solution for the the information system's development and implementation. A generic software/non-software model could be developed by integrating the enterprise blueprint concept (Zachman and the object oriented paradigm (Coad's archetype concept. The standardization of the generic software architecture for various specific software components could be a direction of crucial importance, offering the guarantee of the quality of the model and increasing the efficiency of the design, development and implementation of the software. This approach is also useful for the implementation of the ERP systems designed to fit the user’s particular requirements.

  14. Modeling zero energy building: technical and economical optimization

    OpenAIRE

    Ferrara, Maria; Virgone, Joseph; Fabrizio, Enrico; Kuznik, Frédéric; Filippi, Marco

    2013-01-01

    International audience This study was born in the context of new challenges imposed by the recast of Energy Performance of Buildings. The aim of this work is to provide a useful method to deal with a huge number of simulations corresponding to a large number of single-family house configurations in order to optimize a constructive solution from both technical and economical point of view. The method combines the use of TRNSYS, building energy simulation program, with GenOpt, Generic Optimi...

  15. Construction of a computational anatomical model of the peripheral cardiac conduction system.

    Science.gov (United States)

    Sebastian, Rafael; Zimmerman, Viviana; Romero, Daniel; Frangi, Alejandro F

    2011-12-01

    A methodology is presented here for automatic construction of a ventricular model of the cardiac conduction system (CCS), which is currently a missing block in many multiscale cardiac electromechanic models. It includes the His bundle, left bundle branches, and the peripheral CCS. The algorithm is fundamentally an enhancement of a rule-based method known as the Lindenmayer systems (L-systems). The generative procedure has been divided into three consecutive independent stages, which subsequently build the CCS from proximal to distal sections. Each stage is governed by a set of user parameters together with anatomical and physiological constrains to direct the generation process and adhere to the structural observations derived from histology studies. Several parameters are defined using statistical distributions to introduce stochastic variability in the models. The CCS built with this approach can generate electrical activation sequences with physiological characteristics. PMID:21896384

  16. Reactor building

    International Nuclear Information System (INIS)

    The present invention concerns a structure of ABWR-type reactor buildings, which can increase the capacity of a spent fuel storage area at a low cost and improved earthquake proofness. In the reactor building, the floor of a spent fuel pool is made flat, and a depth of the pool water satisfying requirement for shielding is ensured. In addition, a depth of pool water is also maintained for a equipment provisionally storing pool for storing spent fuels, and a capacity for a spent fuel storage area is increased by utilizing surplus space of the equipment provisionally storing pool. Since the flattened floor of the spent fuel pool is flushed with the floor of the equipment provisionally storing pool, transfer of horizontal loads applied to the building upon occurrence of earthquakes is made smooth, to improve earthquake proofness of the building. (T.M.)

  17. Building Languages

    Science.gov (United States)

    ... family's native language) is taught as the child's second language through reading, writing, speech, and use of residual ... that parents can use to help their child learn language. There are many types of building blocks, and ...

  18. Geometric analysis characterizes molecular rigidity in generic and non-generic protein configurations

    Science.gov (United States)

    Budday, Dominik; Leyendecker, Sigrid; van den Bedem, Henry

    2015-10-01

    Proteins operate and interact with partners by dynamically exchanging between functional substates of a conformational ensemble on a rugged free energy landscape. Understanding how these substates are linked by coordinated, collective motions requires exploring a high-dimensional space, which remains a tremendous challenge. While molecular dynamics simulations can provide atomically detailed insight into the dynamics, computational demands to adequately sample conformational ensembles of large biomolecules and their complexes often require tremendous resources. Kinematic models can provide high-level insights into conformational ensembles and molecular rigidity beyond the reach of molecular dynamics by reducing the dimensionality of the search space. Here, we model a protein as a kinematic linkage and present a new geometric method to characterize molecular rigidity from the constraint manifold Q and its tangent space Tq Q at the current configuration q. In contrast to methods based on combinatorial constraint counting, our method is valid for both generic and non-generic, e.g., singular configurations. Importantly, our geometric approach provides an explicit basis for collective motions along floppy modes, resulting in an efficient procedure to probe conformational space. An atomically detailed structural characterization of coordinated, collective motions would allow us to engineer or allosterically modulate biomolecules by selectively stabilizing conformations that enhance or inhibit function with broad implications for human health.

  19. Platinum derivatives: generic brands vs. original, in vitro tests

    Directory of Open Access Journals (Sweden)

    Cetean Sînziana

    2015-12-01

    Full Text Available The entry of the generic drugs on the market was an impressive development of the pharmaceutical industry and due to their lower prices also a decrease in the cost price for the treatment of patients. The difference in price (sometimes even 50% between generics and original and different response to therapy sometimes raised serious questions related to their therapeutic equivalence. The scientific community is increasingly interested in this aspect, with studies (in vitro and on patients demonstrated statistically significant differences in terms of differences generic / original drug. In this context, the aim of our study was to assess the in vitro cytotoxic activity of oxaliplatin (original and generic drug on DLD-1 cell lines, HT-29, and carboplatin cytotoxic activity (and the reference molecule from Santa Cruz Biotechnology on cell line A2780. Cell viability was evaluated using the MTT assay.

  20. Generic communications index. Listings of communications 1971-1989

    International Nuclear Information System (INIS)

    As part of its program to feed back information on operating experience to industry, the U.S. Nuclear Regulatory Commission (NRC) issues generic communications called bulletins (about 5/yr), circulars (now discontinued), generic letters (about 20/yr), and information notices (about 100/yr). The report presents an updated Generic Communications Index (GCI; previously published in NUREG/CR-4690, Vol. 1, December 1987) of all such communications from 1971, when such documentation started, to 1989. The GCI consists of records, one for each communication, containing fields for identification number, title, NRC technical contact, general system or topic, specific component or topic, cause or defect, potential effect, remarks, and vendors involved. To facilitate information retrieval, the report also contains topical listings of generic communications numbers. (author)

  1. 77 FR 60125 - Generic Drug Facilities, Sites and Organizations

    Science.gov (United States)

    2012-10-02

    ...) included in the Food and Drug Administration Safety and Innovation Act (FDASIA). This notice is intended to... generic drug submission that is pending or approved to produce a finished dosage form (FDF) of a...

  2. A Generic Methodology for Superstructure Optimization of Different Processing Networks

    DEFF Research Database (Denmark)

    Bertran, Maria-Ona; Frauzem, Rebecca; Zhang, Lei;

    2016-01-01

    In this paper, we propose a generic computer-aided methodology for synthesis of different processing networks using superstructure optimization. The methodology can handle different network optimization problems of various application fields. It integrates databases with a common data architecture...

  3. Generic vanishing and classification of irregular surfaces in positive characteristics

    OpenAIRE

    Wang, Yuan

    2015-01-01

    We establish a generic vanishing theorem for surfaces in characteristic $p$ that lift to $W_2(k)$ and use it for surface classification of surfaces of general type with Euler characteristic 1 and large Albanese dimension.

  4. Anatomical, neurophysiological and perceptual issues of tactile perception

    NARCIS (Netherlands)

    Cheung, B.; Erp, J.B.F. van; Cholewiak, R.W.

    2008-01-01

    In this chapter, we are concerned with what our touch receptors and the associated central nervous structures do. Our description begins with the anatomical and physiological characteristics of the touch receptors followed by a comprehensive psychophysical overview of touch sensation and perception.

  5. ANATOMICAL PRINCIPLES BEHIND PRESERVATION OF LARYNGEAL NERVES DURING THYROIDECTOMY

    Directory of Open Access Journals (Sweden)

    O. Fabian

    2011-08-01

    Full Text Available This paper presents the anatomical principles behind preservation of inferior laryngeal nerve and of the external branch of superior laryngeal nerve during thyroidectomy. The embryological development of thyroid and recurrent laryngeal nerves explains the constant relationship between Zuckerkandl’s tuberculum and the recurrent laryngeal nerve, while anomalies in development of the aortic arches explain the presence of rare anatomical variants, with a high risk of nerve injury, of non-recurrent course of the inferior laryngeal nerve. Good knowledge of the relationship between the external branch of superior laryngeal nerve and the superior thyroid artery makes possible to avoid transection of this branch during ligature around superior thyroid artery and vein. Anatomical landmarks used to identify the recurrent laryngeal nerve (tracheo-oesophageal sulcus, the cross-over with the inferior thyroid artery, Berry’s ligament, Zuckerkandl’s tuberculum and variations in the extra-laryngeal branching of the nerve are discussed based on data from the literature. The anatomical variants when the inferior laryngeal nerve doesn’t have a recurrent course are also discussed

  6. An anatomical and functional topography of human auditory cortical areas

    Directory of Open Access Journals (Sweden)

    Michelle eMoerel

    2014-07-01

    Full Text Available While advances in magnetic resonance imaging (MRI throughout the last decades have enabled the detailed anatomical and functional inspection of the human brain non-invasively, to date there is no consensus regarding the precise subdivision and topography of the areas forming the human auditory cortex. Here, we propose a topography of the human auditory areas based on insights on the anatomical and functional properties of human auditory areas as revealed by studies of cyto- and myelo-architecture and fMRI investigations at ultra-high magnetic field (7 Tesla. Importantly, we illustrate that - whereas a group-based approach to analyze functional (tonotopic maps is appropriate to highlight the main tonotopic axis - the examination of tonotopic maps at single subject level is required to detail the topography of primary and non-primary areas that may be more variable across subjects. Furthermore, we show that considering multiple maps indicative of anatomical (i.e. myelination as well as of functional properties (e.g. broadness of frequency tuning is helpful in identifying auditory cortical areas in individual human brains. We propose and discuss a topography of areas that is consistent with old and recent anatomical post mortem characterizations of the human auditory cortex and that may serve as a working model for neuroscience studies of auditory functions.

  7. Pattern recognition of anatomical shapes in CT scans

    International Nuclear Information System (INIS)

    In medical image processing pattern recognition has become of major value in anatomical analysis and in computer aided information processing. Specifically, pattern recognition techniques simplify software development by means of which clinicians can manipulate anatomical relationships. As part of an overall CT pattern recognition system, a sequential edge tracking routine was devised together with a normalized Fourier descriptor analysis of identified shapes. A collection of shapes were extracted from CT scans of two patients and entered into an anatomic shape dictionary. This dictionary was employed in pattern matching experiments and in three-dimensional anatomical reconstruction. A sequential-edge tracking algorithm of high reliability, consistency, and image invariance, capable of utilizing heuristic and statistical rules, was demonstrated. Tests of pattern matching algorithms based on Fourier descriptors provided rapid and accurate body organ recognition of shapes extracted from de novo images using the shape dictionary. Results indicate that automated contour extraction and object recognition from cross-sectional images of human anatomy can be performed effectively, reliably, and rapidly. This abstract discusses an image processing environment that circumvents manual and subjective shape extraction, by substituting automatic and quantitative shape extraction, pattern matching and object recognition

  8. Ankle Joint Fusion With an Anatomically Preshaped Anterior Locking Plate.

    Science.gov (United States)

    Wiewiorski, Martin; Barg, Alexej; Schlemmer, Thomas; Valderrabano, Victor

    2016-01-01

    We present a novel fixation plate for primary ankle joint fusion. A single anatomically preshaped angular stable plate was used with an anterior approach. An excellent result with good bone consolidation was present at the 1-year follow-up examination. PMID:25998475

  9. The Contribution of Dynamic Exploration to Virtual Anatomical Learning

    Directory of Open Access Journals (Sweden)

    Jan-Maarten Luursema

    2011-01-01

    Full Text Available Virtual Learning Environments are increasingly becoming part of the medical curriculum. In a previous study we (luursema et al., 2006 found that a combination of computer-implemented stereopsis (visual depth through seeing with both eyes and dynamic exploration (being able to continuously change one's viewpoint relative to the studied objects in real time is beneficial to anatomical learning, especially for subjects of low visuo spatial ability (the ability to form, retrieve, and manipulate mental representations of a visuo-spatial nature. A follow-up study (luursema et al., 2008 found the contribution of computer-implemented stereopsis to this effect to be small but significant. The present experiment investigated the contribution of dynamic exploration to anatomical learning by means of a virtual learning environment. Seventy participants were tested for visuo-spatial ability and were grouped in pairs matched for this ability. One individual of the pair actively manipulated a 3D reconstruction of the human abdomen; the other individual passively watched the interactions of the first individual on a separate screen. Learning was assessed by two anatomical learning tests. Dynamic exploration provided a small but significant benefit to anatomical learning.

  10. Optimizing conditions for computer-assisted anatomical learning

    NARCIS (Netherlands)

    Luursema, Jan-Maarten; Verwey, Willem B.; Kommers, Piet A.M.; Geelkerken, Robert H.; Vos, Hans J.

    2006-01-01

    An experiment evaluated the impact of two typical features of virtual learning environments on anatomical learning for users of differing visuo-spatial ability. The two features studied are computer-implemented stereopsis (the spatial information that is based on differences in visual patterns proje

  11. The role of stereopsis in virtual anatomical learning

    NARCIS (Netherlands)

    Luursema, Jan-Maarten; Verwey, Willem B.; Kommers, Piet A.M.; Annema, Jan-Henk

    2008-01-01

    The use of virtual learning environments in the medical field is on the rise. An earlier experiment [Luursema, J.-M., Verwey, W.B., Kommers, P.A.M., Geelkerken, R.H., Vos, H.J., 2006. Optimizing conditions for computer-assisted anatomical learning. Interacting with Computers, 18, 1123–1138.] found t

  12. Surface anatomy and anatomical planes in the adult turkish population.

    Science.gov (United States)

    Uzun, C; Atman, E D; Ustuner, E; Mirjalili, S A; Oztuna, D; Esmer, T S

    2016-03-01

    Surface anatomy and anatomical planes are widely used in education and clinical practice. The planes are largely derived from cadaveric studies and their projections on the skin show discrepancies between and within anatomical reference textbooks. In this study, we reassessed the accuracy of common thoracic and abdominopelvic anatomical planes using computed tomography (CT) imaging in the live adult Turkish population. After patients with distorting pathologies had been excluded, CT images of 150 supine patients at the end tidal inspiration were analyzed. Sternal angle, transpyloric, subcostal, supracristal and pubic crest planes and their relationships to anatomical structures were established by dual consensus. The tracheal bifurcation, azygos vein/superior vena cava (SVC) junction and pulmonary bifurcation were usually below the sternal angle while the concavity of the aortic arch was generally within the plane. The tip of the tenth rib, the superior mesenteric artery and the portal vein were usually within the transpyloric plane while the renal hila and the fundus of the gallbladder were below it. The inferior mesenteric artery was below the subcostal plane and the aortic bifurcation was below the supracristal plane in most adults. Projectional surface anatomy is fundamental to medical education and clinical practice. Modern cross-sectional imaging techniques allow large groups of live patients to be examined. Classic textbook information regarding anatomy needs to be reviewed and updated using the data gathered from these recent studies, taking ethnic differences into consideration. Clin. Anat. 29:183-190, 2016. © 2015 Wiley Periodicals, Inc. PMID:26403267

  13. Anatomical Modifications in two Juncus Species under Salt Stress Conditions

    Directory of Open Access Journals (Sweden)

    Mohamad Al HASSAN

    2015-12-01

    Full Text Available The anatomic structure of roots and culms of two Juncus species with different degrees of salt tolerance was analysed in plants grown for two months under salt stress (NaCl treatments and in control, non-treated plants. The aim of the study was not only to compare the anatomical structures of a halophyte (J. acutus and a related glycophyte (J. articulatus, but mostly to assess whether salt stress induced anatomical modifications, by identifying differences between control and treated plants. Several slight differences have been indeed detected, in terms of endodermis type, development of aerenchyma and extent of sclerenchyma in perivascular sheaths. The role of Casparian endodermis was here discussed in relation to its complex implications in controlling salt influx at the root level that is an efficient mechanism involved in halophytes. Aerenchyma is a common feature found in marshy halophytes, allowing them to survive naturally under flooding conditions; however, when occurring in non-waterlogged plants, as is the case of this study, it should be regarded as a genetically, constitutive adaptation rather than an inducible one. Nevertheless, such anatomic modifications should be regarded as mere alterations due to stress – that is, as stress responses – and not as truly adaptations to salinity. In this context, the nature of these modifications – either considered as adaptations or damage indicators of salt stress – should be further reconsidered.

  14. Multiple variations of the tendons of the anatomical snuffbox

    Science.gov (United States)

    Thwin, San San; Zaini, Fazlin; Than, Myo

    2014-01-01

    INTRODUCTION Multiple tendons of the abductor pollicis longus (APL) in the anatomical snuffbox of the wrist can lead to the development of de Quervain's syndrome, which is caused by stenosing tenosynovitis. A cadaveric study was performed to establish the variations present in the tendons of the anatomical snuffbox in a Malaysian population, in the hope that this knowledge would aid clinical investigation and surgical treatment of de Quervain's tenosynovitis. METHODS Routine dissection of ten upper limbs was performed to determine the variations in the tendons of the anatomical snuffbox of the wrist. RESULTS In all the dissected upper limbs, the APL tendon of the first extensor compartment was found to have several (3–14) tendon slips. The insertion of the APL tendon slips in all upper limbs were at the base of the first metacarpal bone, trapezium and fascia of the opponens pollicis muscle; however, in seven specimens, they were also found to be attached to the fleshy belly of the abductor pollicis brevis muscle. In two specimens, double tendons of the extensor pollicis longus located in the third extensor compartment were inserted into the capsule of the proximal interphalangeal joints before being joined to the extensor expansion. In two other specimens, the first extensor compartment had two osseofibrous tunnels divided by a septum that separated the APL tendon from the extensor pollicis brevis tendon. CONCLUSION Multiple variations were found in the anatomical snuffbox region of the dissected upper limbs. Knowledge of these variations would be useful in interventional radiology and orthopaedic surgery. PMID:24452976

  15. The generics in transplantation and the rules on their use.

    Science.gov (United States)

    Masri, Marwan

    2003-06-01

    By definition a product identified by its official chemical name rather than an advertised brand name is called a generic. If a drug exert its pharmacological effects at the same site, have the same potency, same dosage form and same bioavailability as a brand name, reference listed drug (RLD), is considered as a generic. However inactive ingredients can differ between brand name and generic. It is through the regulations of the FDA that the generics gained many ground in the drug market, they currently account to more than 42% of the total prescription in the USA. These regulations include the abbreviated new drug application (ANDA) for the registration process and drug substitution at the pharmacy level without patient or physician consent. This coupled with a keen interest of third party payers and the health authorities to reduce the high transplant health budget (over 2 Billion US $) made it a necessity to introduce the generics into the field of transplantation. Using the above mentioned definition we can theoretically say that all anti-lymphocytes, produced in the same animal species, are generic of each. Moreover, monoclonal antibodies that are directed against the same target and have the same bioavailability are also consider generics to each other. Of all the immunosuppressive drugs that have been introduced into the field of transplantation none has been as dominant as Cyclosporine. Cyclosporine became and still is the backbone for any immunosuppressive protocol. In the year 1992, Consupren, the first, non-FDA approved, generic to Sandimmun was introduced. Although Consupren was not bioequivalent to Neoral, however, long-term results in kidney transplantation have been similar for both drugs. The introduction of Consupren resulted in a near 40% reduction in the total cost of immunosuppressive therapy. Interestingly the cost of the brand name drug Neoral was also reduced by 20%. The cost reduction allowed the introduction of the new immunosuppressive

  16. Generic and Brand Advertising Strategies in a Dynamic Duopoly

    OpenAIRE

    Frank M. Bass; Anand Krishnamoorthy; Ashutosh Prasad; Sethi, Suresh P.

    2005-01-01

    To increase the sales of their products through advertising, firms must integrate their brand-advertising strategy for capturing market share from competitors and their generic-advertising strategy for increasing primary demand for the category. This paper examines whether, when, and how much brand advertising versus generic advertising should be done. Using differential game theory, optimal advertising decisions are obtained for a dynamic duopoly with symmetric or asymmetric competitors. We ...

  17. Analyses of Generic Dairy Advertising, 1984-97

    OpenAIRE

    Blisard, Noel; Blayney, Donald P.; Chandran, Ram; Allshouse, Jane E.

    1999-01-01

    Generic advertising raised fluid milk sales about 6.0 percent, or 18.1 billion pounds, between September 1984 and September 1997. Sales of cheese rose by about 6.8 billion pounds (milk equivalent) in the same period because of increased generic advertising. An assessment of 15 cents per hundredweight of milk sold commercially, mandated by the Dairy and Tobacco Adjustment Act of 1983, funded the advertising. Activities of the National Fluid Milk Processor Promotion Board also contributed to in...

  18. Generic Methodology for Verification and Validation for Training Simulations

    OpenAIRE

    Roza, Z.C.; Emmerik, M.L. van; de Voogd, J. M.; van Lier, A

    2010-01-01

    Modelling and simulation (M&S) is increasingly being exploited as an enabling technology to support tactical, operational and strategic training objectives within the military domain. Verification and Validation of M&S assets are intended to ensure that only correct and suitable training results are obtained thereby facilitating risk management with regards to M&S use for military training purposes. The Generic Methodology (GM) for Verification and Validation (VV&A) is a generic and comprehen...

  19. Promoting and regulating generic medicines: Brazil in comparative perspective

    OpenAIRE

    Massard da Fonseca, Elize; Shadlen, Kenneth C.

    2016-01-01

    Generic drug substitution may constitute a core instrument of countries’ National Pharmaceutical Policies, a way to reduce the price of drugs while expanding access to health care. Despite the potential importance of policy in this area and observed differences in national practices, scholars embarking on comparative analysis lack a roadmap of which dimensions of generic drug policy to assess and compare. We consider countries’ rules and regulations across four dimensions: (1) the demonstrati...

  20. Scientific Considerations for Generic Synthetic Salmon Calcitonin Nasal Spray Products

    OpenAIRE

    Lee, Sau L.; Yu, Lawrence X.; Cai, Bing; Johnsons, Gibbes R.; Rosenberg, Amy S.; Cherney, Barry W.; Guo, Wei; Raw, Andre S.

    2010-01-01

    Under the Abbreviated New Drug Application pathway, a proposed generic salmon calcitonin nasal spray is required to demonstrate pharmaceutical equivalence and bioequivalence to the brand-name counterpart or the reference listed drug. This review discusses two important aspects of pharmaceutical equivalence for this synthetic peptide nasal spray product. The first aspect is drug substance sameness, in which a proposed generic salmon calcitonin product is required to demonstrate that it contain...

  1. Financial Benefits of Florida Generic Orange Juice Marketing

    OpenAIRE

    Thomas, Arthur M.; Canter, Neil

    2009-01-01

    The benefits to Florida orange growers of generic orange juice advertising are assessed using additive, nonlinear, regional econometric models, measuring the impact of category and brand marketing efforts on category demand while controlling for pricing and various other factors. The study shows that generic marketing efforts increased orange juice category demand by 8.3 percent, resulting in increased orange prices and a benefit-to-cost ratio to Florida growers of 3.5 to 1. Branded promotion...

  2. Does Generic Advertising Help or Hurt Brand Advertising?

    OpenAIRE

    Suh, Daeseok; Chung, Chanjin

    2009-01-01

    The purpose of this study is to investigate whether the generic advertising helps or hurts the brand advertising within the differentiated product environments. We develop an analytical model that includes both generic and brand advertising expenditures considering vertical product differentiation. Then the analysis is devoted to examine how marginal effects of expenditure affect each other under product differentiation. To help examine the relationship, we also include a new variable, the de...

  3. Generic Ada code in the NASA space station command, control and communications environment

    Science.gov (United States)

    Mcdougall, D. P.; Vollman, T. E.

    1986-01-01

    The results of efforts to apply powerful Ada constructs to the formatted message handling process are described. The goal of these efforts was to extend the state-of-technology in message handling while at the same time producing production-quality, reusable code. The first effort was initiated in September, 1984 and delivered in April, 1985. That product, the Generic Message Handling Facility, met initial goals, was reused, and is available in the Ada Repository on ARPANET. However, it became apparent during its development that the initial approach to building a message handler template was not optimal. As a result of this initial effort, several alternate approaches were identified, and research is now on-going to identify an improved product. The ultimate goal is to be able to instantly build a message handling system for any message format given a specification of that message format. The problem lies in how to specify the message format, and one that is done, how to use that information to build the message handler. Message handling systems and message types are described. The initial efforts, its results and its shortcomings are detailed. The approach now being taken to build a system which will be significantly easier to implement, and once implemented, easier to use, is described. Finally, conclusions are offered.

  4. Toward better quality of anticancer generics in India

    Directory of Open Access Journals (Sweden)

    V S Gota

    2014-01-01

    Full Text Available Treatment of cancer is limited by affordability of patients in the many developing countries including India. Generic drug manufacturers have responded to this scenario by making drugs available at affordable costs, often at less than 10% the cost of the original brand. In our practice, it is found that there is a three-fold higher prescription of generic brands compared to innovator, accompanied by cost savings of up to 80% per prescription. Unfortunately, the regulatory environment prevailing in India is not geared to ensure satisfactory quality of generic products. The standards set by the regulatory agencies for establishing equivalence of generics vis-ΰ-vis the innovator product allow anticancer generics to enter markets without undergoing clinical evaluation. Many drug manufacturing units in India flout good manufacturing practice norms, which was evident during the center for drug evaluation and research classifications inspection in the year 2006. Inferior drugs have therefore, made their way into the Indian markets, compromising the quality of care. The system of drug manufacturing and marketing approval needs a major overhaul, including regular inspection of manufacturing facilities. Bioequivalence should be made mandatory for all oral formulations. Unless these measures are rigidly implemented, the benefits of generic substitution would be seriously undermined.

  5. Definition and Classification of Generic Drugs Across the World.

    Science.gov (United States)

    Alfonso-Cristancho, Rafael; Andia, Tatiana; Barbosa, Tatiana; Watanabe, Jonathan H

    2015-08-01

    Our aim was to systematically identify and compare how generic medications, as defined by the US Food and Drug Administration (FDA), World Health Organization (WHO), and European Medicines Agency (EMA), are classified and defined by regulatory agencies around the world. We focused on emerging markets and selected the most populated countries in each of the WHO regions: Africa, the Americas, Eastern Mediterranean, Europe, Southeast Asia, and Western Pacific. A structured review of published literature was performed through December 2013. Direct information from regulatory agencies and Ministries of Health for each country was extracted. Additionally, key informant interviews were performed for validation. Of the 21 countries selected, approximately half provided an official country-level definition for generic pharmaceuticals. The others did not have any definition or referred to the WHO. Only two-thirds of the countries had specific requirements for generic pharmaceuticals, often associated with clinical interchangeability. Most countries with requirements mention bioequivalence, but few required bioavailability studies explicitly. Over 30% of the countries had other terms associated with generics in their definitions and processes. In countries with generic drug policies, there is reference to patent and/or data protection during the drug registration process. Several countries do not mention good manufacturing practices as part of the evaluation process. Countries in Africa and Eastern Mediterranean regions appear to have a less developed regulatory framework. In summary, there is significant variability in the definition and classification of generic drugs in emerging markets. Standardization of the definitions is necessary to make international comparisons viable. PMID:26091708

  6. Analysis of pharmacists' opinions, attitudes and experiences with generic drugs and generic substitution in the Czech Republic.

    Science.gov (United States)

    Maly, Josef; Dosedel, Martin; Kubena, Ales; Vlcek, Jiri

    2013-01-01

    Generic substitution (GS) is an integral part of drug policy in many countries. Similarly to other countries its introduction in the Czech Republic gave rise to a vibrant discussion. The aim of the study was to map and analyze pharmacists' opinions of, attitudes towards and experiences with generic drugs and GS after the first year from its legislative embodiment in the Czech Republic. All 7,665 members of the Czech Chamber of Pharmacists were addressed to participate in a questionnaire survey between November 2008 and March 2009. The questionnaire consisted of 28 questions concerning the issue of generic drugs and GS and was divided into five sections. All collected data were analyzed using descriptive statistics and correlations were tested by selected parametric and non-parametric tests. A total of 615 completed questionnaire forms were returned (a questionnaire return rate of 8.0%). The demographic characteristics of the respondents were as follows: 470 (76.4%) females, mean age of 37.5 years (SD = 10.4) and 429 (69.6%) pharmacists with a practice specialization. Altogether 345 (56.1%) respondents became aware of the issue of brand name and generic drugs during their undergraduate studies. 378 (61.5%) respondents considered generic drugs as bioequivalent and 455 (74.0%) respondents as therapeutically equivalent to the respective brand name drugs. 99 (16.1%) pharmacists believed that generic products are of lower quality than branded drugs and 69 (11.2%) respondents expected generics to cause more adverse drug reactions. GS was perceived as a positive tool by 476 (77.4%) respondents. Only 71 (11.5%) respondents showed acquaintance with all the legal rules for GS. Legislation awareness and attitude towards GS was correlated with age (p awareness can minimize adverse drug events caused by generic drugs and at the same time enhance the professional status of pharmacists. PMID:24147373

  7. Building Procurement

    DEFF Research Database (Denmark)

    Andersson, Niclas

    2007-01-01

    ‘The procurement of construction work is complex, and a successful outcome frequently elusive’. With this opening phrase of the book, the authors take on the challenging job of explaining the complexity of building procurement. Even though building procurement systems are, and will remain, complex...... despite this excellent book, the knowledge, expertise, well-articulated argument and collection of recent research efforts that are provided by the three authors will help to make project success less elusive. The book constitutes a thorough and comprehensive investigation of building procurement, which...... evolves from a simple establishment of a contractual relationship to a central and strategic part of construction. The authors relate to cultural, ethical and social and behavioural sciences as the fundamental basis for analysis and understanding of the complexity and dynamics of the procurement system...

  8. Competence Building

    DEFF Research Database (Denmark)

    Borrás, Susana; Edquist, Charles

    The main question that guides this paper is how governments are focusing (and must focus) on competence building (education and training) when designing and implementing innovation policies. With this approach, the paper aims at filling the gap between the existing literature on competences on the...... one hand, and the real world of innovation policy-making on the other, typically not speaking to each other. With this purpose in mind, this paper discusses the role of competences and competence-building in the innovation process from a perspective of innovation systems; it examines how governments...... and public agencies in different countries and different times have actually approached the issue of building, maintaining and using competences in their innovation systems; it examines what are the critical and most important issues at stake from the point of view of innovation policy, looking...

  9. Building Bridges

    DEFF Research Database (Denmark)

    The report Building Bridges adresses the questions why, how and for whom academic audience research has public value, from the different points of view of the four working groups in the COST Action IS0906 Transforming Audiences, Transforming Societies – “New Media Genres, Media Literacy and Trust...... in the Media”, “Audience Interactivity and Participation”, “The Role of Media and ICT Use for Evolving Social Relationships” and “Audience Transformations and Social Integration”. Building Bridges is the result of an ongoing dialogue between the Action and non-academic stakeholders in the field of audience...

  10. 77 FR 17493 - Agency Information Collection Activities: Proposed Collection; Comment Request; DOI Generic...

    Science.gov (United States)

    2012-03-26

    ... December 22, 2010 (75 FR 80542). We again request public comments on this proposed information collection...; DOI Generic Clearance for the Collection of Qualitative Feedback on Agency Service Delivery AGENCY... Interior has submitted a Generic Information Collection Request (Generic ICR): ``DOI Generic Clearance...

  11. Investigation into the interchangeability of generic formulations using immunosuppressants and a broad selection of medicines

    NARCIS (Netherlands)

    Yu, Y.; Teerenstra, S.; Neef, C.; Burger, D.M.; Maliepaard, M.

    2015-01-01

    PURPOSE: To date, the interchangeability of generic drugs has only been investigated for a limited number of medicines. The objective of this study was to investigate generic-generic drug interchangeability in a large subset of generic formulations in order to cover a broad spectrum of drugs. METHOD

  12. Generic host state incentive report. Draft

    International Nuclear Information System (INIS)

    Even the most carefully designed and operated low-level radioactive waste management facility will present potential risks and costs to nearby residents. Individuals who live near these facilities may receive some benefits, but they also bear the brunt of any adverse impacts. It is with this in mind that various siting techniques have been developed. Before any ''extra'' compensation or incentive can be discussed, however, it must first be clearly demonstrated that these facilities protect public health and the environment. This report addresses five distinct areas as follows: mitigation measure to prevent or reduce the impact of the facility; incentives and compensation techniques that might make a facility more acceptable; the use of agreement building in order to develop an arrangement between the host community and a facility proponent; the importance of economics resulting from a typical regional low-level radioactive waste facility; and the role of state government in promoting and legitimizing the use of incentives. 6 tabs

  13. SPEECH RECOGNITION USING GENERIC SHORTEST DISTANCE ALGORITHM

    Directory of Open Access Journals (Sweden)

    Mahak Dureja

    2016-06-01

    Full Text Available The first major contribution of this paper may well be a dialog model support propositional content and intentions. Two distinct components of the model square measure mentioned in depth: (a associate approach to the modeling and trailing of propositional content that support description logics and default unification. (b Associate approach to the modeling and trailing of intentions that is supported dialogue acts, dialogue moves and dialog games alongside dialogue phases. These building blocks could also be organized in a way the best that the complete dialogue is delineate on five utterly completely different levels terribly very languageindependent way. A replacement characterization referred to as dialogue moves is introduced that cover several dialogue acts. The system supports zero verbal communications with foreign interlocutors in mobile things. It acknowledges spoken input, analyses and interprets it, and ultimately utters the interpretation. This polyglot system handles dialog in three business-oriented domains, with duplex translation between two languages (English, and Hindi.

  14. Health Informatics Can Avoid Committing Symbolic Violence by Recognizing and Supporting Generic Decision-making Competencies.

    Science.gov (United States)

    Kaltoft, Mette Kjer; Nielsen, Jesper Bo; Salkeld, Glenn; Dowie, Jack

    2015-01-01

    'Symbolic violence' is committed, however well-intentionally, by the imposition of particular conceptualizations of what information, in what form and quality, is needed in order to make an 'informed choice' and hence - by questionable segue - a high quality decision. The social and cultural forms of relevant cognitive capital possessed by those who fail, because of their low general literacy, professionally-set knowledge tests of functional health literacy, are being ignored. Failing to recognise and exploit a particular form of functional decision literacy, in fact leads to symbolic violence being experienced by individuals at any and all levels of general literacy. It leads many to adopt the same range of avoidant and other undesirable strategies within healthcare situations observed in those of low basic literacy. The alternative response we propose exploits the alternative generic decision literacy which comes in the form of the ability to access and use the decision-relevant resources provided for many consumer services and products on comparison websites and magazines. The methodology is the simple form of multi-criteria analysis in which the products' ratings on multiple criteria are combined with criterion weights (supplied by the site) to produce scores and 'best buys' and 'good value for money' verdicts. Our alternative approach extends this approach to healthcare options and permits the incorporation of personal criterion weights in furtherance of person-centred care. Health informaticians, especially those in the decision support field, should build on this widespread generic competence. The fact that it is generic, far from implying context insensitivity, can be seen as a necessary basis for achieving context-sensitivity and sensitivisation at the level of the individual person as they experience a lifelong sequence of healthcare decisions. PMID:26262547

  15. Sustainable Buildings

    DEFF Research Database (Denmark)

    Tommerup, Henrik M.; Elle, Morten

    The scientific community agrees that: all countries must drastically and rapidly reduce their CO2 emissions and that energy efficient houses play a decisive role in this. The general attitude at the workshop on Sustainable Buildings was that we face large and serious climate change problems that...

  16. Computational investigation of nonlinear microwave tomography on anatomically realistic breast phantoms

    DEFF Research Database (Denmark)

    Jensen, P. D.; Rubæk, Tonny; Mohr, J. J.

    2013-01-01

    The performance of a nonlinear microwave tomography algorithm is tested using simulated data from anatomically realistic breast phantoms. These tests include several different anatomically correct breast models from the University of Wisconsin-Madison repository with and without tumors inserted....

  17. An anatomical evaluation of the serratus anterior plane block.

    Science.gov (United States)

    Mayes, J; Davison, E; Panahi, P; Patten, D; Eljelani, F; Womack, J; Varma, M

    2016-09-01

    The serratus anterior plane block has been described for analgesia of the hemithorax. This study was conducted to determine the spread of injectate and investigate the anatomical basis of the block. Ultrasound-guided serratus anterior plane block was performed on six soft-fix embalmed cadavers. All cadavers received bilateral injections, on one side performed with 20 ml latex and on the other with 20 ml methylene blue. Subsequent dissection explored the extent of spread and nerve involvement. Photographs were taken throughout dissection. The intercostal nerves were involved on three occasions with dye, but not with latex. The lateral cutaneous branches of the intercostal nerve contained dye and latex on all occasions. The serratus plane block appears to be mediated through blockade of the lateral cutaneous branches of the intercostal nerves. Anatomically, serratus plane block does not appear to be equivalent to paravertebral block for rib fracture analgesia. PMID:27440171

  18. A time dependent anatomically detailed model of cardiac conduction

    Science.gov (United States)

    Saxberg, B. E.; Grumbach, M. P.; Cohen, R. J.

    1985-01-01

    In order to understand the determinants of transitions in cardiac electrical activity from normal patterns to dysrhythmias such as ventricular fibrillation, we are constructing an anatomically and physiologically detailed finite element simulation of myocardial electrical propagation. A healthy human heart embedded in paraffin was sectioned to provide a detailed anatomical substrate for model calculations. The simulation of propagation includes anisotropy in conduction velocity due to fiber orientation as well as gradients in conduction velocities, absolute and relative refractory periods, action potential duration and electrotonic influence of nearest neighbors. The model also includes changes in the behaviour of myocardial tissue as a function of the past local activity. With this model, we can examine the significance of fiber orientation and time dependence of local propagation parameters on dysrhythmogenesis.

  19. Anatomical variations of paranasal sinuses: what to inform the otolaryngologist?

    International Nuclear Information System (INIS)

    Anatomic variations of paranasal sinuses are common findings in daily practice. For a radiologist, to know these variations is necessary because of the pathological conditions related to them, and also because they are import for planning a functional endoscopic endonasal surgery, the procedure of choice for diagnosis, biopsy and treatment of various sinonasal diseases. To assure that this surgery is done safely, preventing iatrogenic injuries, it is essential that the surgeon has the mapping of these structures. Thus, a CT is indispensable for preoperative evaluation of paranasal sinuses. Since a general radiologist is expected to know these changes and their relationship to pathological conditions, a literature review and a iconographic essay were conducted with the aim of discussing the importance of major anatomic variations of paranasal sinuses. (author)

  20. Analysis of anatomic variability in children with low mathematical skills

    Science.gov (United States)

    Han, Zhaoying; Fuchs, Lynn; Davis, Nikki; Cannistraci, Christopher J.; Anderson, Adam W.; Gore, John C.; Dawant, Benoit M.

    2008-03-01

    Mathematical difficulty affects approximately 5-9% of the population. Studies on individuals with dyscalculia, a neurologically based math disorder, provide important insight into the neural correlates of mathematical ability. For example, cognitive theories, neuropsychological studies, and functional neuroimaging studies in individuals with dyscalculia suggest that the bilateral parietal lobes and intraparietal sulcus are central to mathematical performance. The purpose of the present study was to investigate morphological differences in a group of third grade children with poor math skills. We compare population averages of children with low math skill (MD) to gender and age matched controls with average math ability. Anatomical data were gathered with high resolution MRI and four different population averaging methods were used to study the effect of the normalization technique on the results. Statistical results based on the deformation fields between the two groups show anatomical differences in the bilateral parietal lobes, right frontal lobe, and left occipital/parietal lobe.

  1. Generalized metrics induced anatomical prior for MAP PET image reconstruction

    International Nuclear Information System (INIS)

    Information theoretic metrics, including mutual information (MI) and joint entropy (JE), have been investigated as priors to incorporate anatomical information in ill-posed positron emission tomography (PET) image reconstruction. These metrics are generally based on the Shannon entropy. Meanwhile, in this paper, we proposed a generalized metrics induced anatomical prior for maximum a posteriori (MAP) PET reconstruction based on the generalized Shannon entropy metrics or Tsallis entropy. For the presented prior computation, a non-parametric method was used to estimate the joint probability density of the PET and MR image. Furthermore, we also developed an one-step-advance (OSA) MAP algorithm for PET image reconstruction with the presented prior regularization. Simulation results show that the presented novel prior has significantly improved the reconstructed PET image quality. (orig.)

  2. Characterization of Capsicum species using anatomical and molecular data.

    Science.gov (United States)

    Dias, G B; Gomes, V M; Moraes, T M S; Zottich, U P; Rabelo, G R; Carvalho, A O; Moulin, M; Gonçalves, L S A; Rodrigues, R; Da Cunha, M

    2013-01-01

    Capsicum species are frequently described in terms of genetic divergence, considering morphological, agronomic, and molecular databases. However, descriptions of genetic differences based on anatomical characters are rare. We examined the anatomy and the micromorphology of vegetative and reproductive organs of several Capsicum species. Four Capsicum accessions representing the species C. annuum var. annuum, C. baccatum var. pendulum, C. chinense, and C. frutescens were cultivated in a greenhouse; leaves, fruits and seeds were sampled and their organ structure analyzed by light and scanning electronic microscopy. Molecular accession characterization was made using ISSR markers. Polymorphism was observed among tector trichomes and also in fruit color and shape. High variability among accessions was detected by ISSR markers. Despite the species studied present a wide morphological and molecular variability that was not reflected by anatomical features. PMID:23479174

  3. Anatomical structure of moss leaves and their photosynthetic activity

    Directory of Open Access Journals (Sweden)

    Jan Krupa

    2014-02-01

    Full Text Available The photosynthetic activity of the leaf area unit increases depending on the degree of differentiation of the anatomical structure of the leaves of six chosen moss species. There is a correlation between the leaf area and the degree of differentiation of the anatomical structure resulting in enlargement of the area of contact of the assimilating cells with air. The leaves of Catharinea undulata having a one-layer blade and provided with several lamellae show a higher photosynthesis per 1 cm2 of their surface than the one-layer leaves of Mniurnm or Funaria. Aloina leaves are the smallest in area among those of the moss species discussed, however, their photosynthetic rate is almost 4.5 times higher than in Funaria leaves. By analogy to the structure of leaves and their function in vascular, plants, these changes and correlations may be considered as attempts of primeval adaptation of mosses to terrestrial conditions of living.

  4. [Anatomical rationale for lingual nerve injury prevention during mandibular block].

    Science.gov (United States)

    Semkin, V A; Dydikin, S S; Kuzin, A V; Sogacheva, V V

    2015-01-01

    The topographic and anatomical study of lingual nerve structural features was done. It was revealed that during mandibular anesthesia possible lingual nerve injury can occur if puncture needle is lower than 1 cm. of molars occlusal surface level. The position of the lingual nerve varies withmandible movements. At the maximum open mouth lingual nerve is not mobile and is pressed against the inner surface of the mandibular ramus by the medial pterygoid muscle and the temporal muscle tendon. When closing the mouth to 1.25±0.2 cmfrom the physiological maximum, lingual nerve is displaced posteriorly from the internal oblique line of the mandible and gets mobile. On the basis of topographic and anatomic features of the lingual nervestructure the authors recommend the re-do of inferior alveolar nerve block, a semi-closed mouth position or the use the "high block techniques" (Torus anesthesia, Gow-Gates, Vazirani-Akinozi). PMID:26271698

  5. Anatomic double-bundle anterior cruciate ligament recon-struction

    OpenAIRE

    Dai, Xue-Song

    2012-01-01

    【Abstract】Objective: To retrospectively evaluate the early results of anatomic double-bundle anterior cruci-ate ligament (ACL) reconstruction and compare with the results of native ACL of the contralateral knee. Methods: The results of a consecutive series of 118 patients receiving arthroscopic ACL reconstruction were evaluated. Eight patients were lost to the latest follow-up, leaving a total of 110 patients available for study within at least 3 years’ clinical fol...

  6. MAPPING BRAIN ANATOMICAL CONNECTIVITY USING WHITE MATTER TRACTOGRAPHY

    OpenAIRE

    Lazar, Mariana

    2010-01-01

    Integration of the neural processes in the human brain is realized through interconnections that exist between different neural centers. These interconnections take place through white matter pathways. White matter tractography is currently the only available technique for reconstructing the anatomical connectivity in the human brain non-invasively and in-vivo. The trajectory and terminations of white matter pathways are estimated from local orientations of nerve bundles. These orientations a...

  7. Anatomical and biochemical investigation of primary brain tumours

    International Nuclear Information System (INIS)

    Cancerous transformation entails major biochemical changes including modifications of the energy metabolism of the cell, e.g. utilisation of glucose and other substrates, protein synthesis, and expression of receptors and antigens. Tumour growth also leads to heterogeneity in blood flow owing to focal necrosis, angiogenesis and metabolic demands, as well as disruption of transport mechanisms of substrates across cell membranes and other physiological boundaries such as the blood-brain barrier. All these biochemical, histological and anatomical changes can be assessed with emission tomography, X-ray computed tomography (CT), magnetic resonance imaging (MRI) and magnetic resonance spectroscopy (MRS). Whereas anatomical imaging is aimed at the diagnosis of brain tumours, biochemical imaging is better suited for tissue characterisation. The identification of a tumoural mass and the assessment of its size and vascularisation are best achieved with X-ray CT and MRI, while biochemical imaging can provide additional information that is crucial for tumour classification, differential diagnosis and follow-up. As the assessment of variables such as water content, appearance of cystic lesions and location of the tumour are largely irrelevant for tissue characterisation, a number of probes have been employed for the assessment of the biochemical features of tumours. Since biochemical changes may be related to the growth rate of cancer cells, they can be thought of as markers of tumour cell proliferation. Biochemical imaging with radionuclides of processes that occur at a cellular level provides information that complements findings obtained by anatomical imaging aimed at depicting structural, vascular and histological changes. This review focusses on the clinical application of anatomical brain imaging and biochemical assessment with positron emission tomography, single-photon emission tomography and MRS in the diagnosis of primary brain tumours, as well as in follow-up. (orig.)

  8. Anatomical and Physiological Considerations in Vestibular Dysfunction and Compensation

    OpenAIRE

    Jones, Sherri M.; Jones, Timothy A.; Mills, Kristal N.; Gaines, G. Christopher

    2009-01-01

    Sensory information from the vestibular, visual, and somatosensory/proprioceptive systems are integrated in the brain in complex ways to produce a final motor output to muscle groups for maintaining gaze, head and body posture, and controlling static and dynamic balance. The balance system is complex, which can make differential diagnosis of dizziness quite challenging. On the other hand, this complex system is organized anatomically in a variety of pathways and some of these pathways have be...

  9. Anatomic Variation of the Common Palmar Digital Nerves and Arteries

    OpenAIRE

    Tian, Dong; Fu, Maoyong

    2015-01-01

    Variations in the course and distribution of common palmar digital nerves and arteries are rare. A classic common palmar digital nerves and arteries are defined as concomitant. During routine dissection classes to undergraduate medical students we observed formation of each common palmar digital nerve divided into 2 or 3 branches and formed a ring enclosing the corresponding common palmar digital artery. Knowledge of the anatomical variations of the common palmar digital nerves and arteries i...

  10. Anatomical basis for sciatic nerve block at the knee level

    OpenAIRE

    Fabiano Timbó Barbosa; Tatiana Rosa Bezerra Wanderley Barbosa; Rafael Martins da Cunha; Amanda Karine Barros Rodrigues; Fernando Wagner da Silva Ramos; Célio Fernando de Sousa-Rodrigues

    2015-01-01

    BACKGROUND AND OBJECTIVES: Recently, administration of sciatic nerve block has been revised due to the potential benefit for postoperative analgesia and patient satisfaction after the advent of ultrasound. The aim of this study was to describe the anatomical relations of the sciatic nerve in the popliteal fossa to determine the optimal distance the needle must be positioned in order to realize the sciatic nerve block anterior to its bifurcation into the tibial and common fibular nerve. METHOD...

  11. Anatomical Atlas-Guided Diffuse Optical Tomography of Brain Activation

    OpenAIRE

    Custo, Anna; Boas, David A.; Tsuzuki, Daisuke; Dan, Ippeita; Mesquita, Rickson; Fischl, Bruce; Grimson, W. Eric L.; Wells, Williams

    2009-01-01

    We describe a neuro imaging protocol that utilizes an anatomical atlas of the human head to guide Diffuse optical tomography of human brain activation. The protocol is demonstrated by imaging the hemodynamic response to median nerve stimulation in three healthy subjects, and comparing the images obtained using a head atlas with the images obtained using the subject-specific head anatomy. The results indicate that using the head atlas anatomy it is possible to reconstruct the location of the b...

  12. A hierarchical scheme for geodesic anatomical labeling of airway trees

    DEFF Research Database (Denmark)

    Feragen, Aasa; Petersen, Jens; Owen, Megan; Lo, Pechin Chien Pau; Thomsen, Laura; Wille, Mathilde; Dirksen, Asger; de Bruijne, Marleen

    We present a fast and robust supervised algorithm for label- ing anatomical airway trees, based on geodesic distances in a geometric tree-space. Possible branch label configurations for a given unlabeled air- way tree are evaluated based on the distances to a training set of labeled airway trees....... Disease (COPD). Performance is statis- tically similar to the inter- and intra-expert agreement, and we found no significant correlation between COPD stage and labeling accuracy....

  13. The anatomical, surgical and orthopedic importance of gastrocnemius

    OpenAIRE

    Ashfaq U. Hassan; Zahida Rasool; Nasir Muzzaffar

    2013-01-01

    Gastrocnemius is one of the most important muscles of lower limb. It belongs to the superficial compartment of calf muscles. They belong to group of superficial flexors. Gastrocnemius, plantaris and soleus form the bulk of the calf. Gastrocnemius forms the belly of the calf. It arises by two distinct heads, connected to the condyles of the femur by strong, flat tendons. It has an immense anatomic, medical, orthopedic and physiological importance and is attributed in a variety of medical and s...

  14. A review of 155 extra-anatomic bypass grafts.

    OpenAIRE

    Foster, M.C.; Mikulin, T; Hopkinson, B R; Makin, G. S.

    1986-01-01

    Extra-anatomic bypass grafting has been used as treatment for patients with aorto-iliac disease who were considered unfit for aortic surgery. Eighty five percent of the patients had ischaemic pain at rest or skin necrosis. One hundred and three femorofemoral (FF) grafts, 40 axillounifemoral and 12 axillobifemoral grafts were performed. Femoropopliteal extension grafts were performed in 39 cases. The three year cumulative graft patency rate was 69% for FF grafts and 48% for both types of axill...

  15. MORPHOLOGICAL ANATOMICAL AND PHITOCHEMICAL CHARACTERISTICS OF SOME ALGAE

    OpenAIRE

    N. S. Kaysheva; M. N. Arkhipova; A. S. Kayshev

    2014-01-01

    Morphological and anatomical features of thalluses of brown (Laminaria saccharina, Fucus vesiculosus) and red (Ahnfeltia plicata) algae, procured at a coastal strip of the Northern basin in gulfs of Ura-Guba and Palkina-Guba at different depths. Compliance of Fucus and Ahnfeltia with pharmacopoeial norms and merchandising indices for Laminaria was established, except for high concentration of sand in Ahnfeltia thalluses. The identity of algae between each other was shown based on the results ...

  16. The aspects regarding Chrysanthemum vitro- and exvitroplantlets anatomical structure

    Directory of Open Access Journals (Sweden)

    Adriana PETRUS-VANCEA

    2007-05-01

    Full Text Available This study was consecrate to observe the histoanatomical structure of roots stems and leafs of Chrysanthemum vitroplantlets, in their vitroculture period and of exvitroplantlets, at 30 days from their septic medium transfer. The registered observations were compared with those realized at similar organs level of greenhouse plants (control lot. The noted differences between vitroplantlets anatomical structure and that greenhouse plants had, in special, ontogenetic bases.

  17. Agreement between anatomic and ultrasound measurements of femoral trochlear depth

    DEFF Research Database (Denmark)

    Miles, James Edward; Westrup, Ulrik; Eriksen, Thomas

    Assessments of trochlear depth for patients with medial patellar luxation have traditionally been estimated from skyline radiographs or visually during surgery. Ultrasound offers a non-invasive evaluation method which could avoid the need for arthrotomy. We compared anatomic, radiographic and ult...... respective DICOM files which restricts ultrasonographic landmark resolution. Further work on quantifying interobserver variation and repeat measurement variation is required to ensure confidence in this technique....

  18. Agreement between anatomic and ultrasound measurements of femoral trochlear depth

    OpenAIRE

    Miles, James Edward; Westrup, Ulrik; Eriksen, Thomas

    2013-01-01

    Assessments of trochlear depth for patients with medial patellar luxation have traditionally been estimated from skyline radiographs or visually during surgery. Ultrasound offers a non-invasive evaluation method which could avoid the need for arthrotomy. We compared anatomic, radiographic and ultrasonographic measurements of trochlear depth using the red fox hind limb as a canine surrogate, dividing the trochlea into five regions from the origin of the caudal cruciate ligament to the proximal...

  19. Plastinated nasal model: a new concept of anatomically realistic cast.

    OpenAIRE

    Durand, Marc; Pourchez, Jérémie; Louis, Bruno; Pouget, Jean-François; Isabey, Daniel; Coste, André; Prades, Jean-Michel; Rusch, Philippe; Cottier, Michèle

    2011-01-01

    BACKGROUND: For many years, researchers have been interested in investigating airflow and aerosol deposition in the nasal cavities. The nasal airways appear to be a complex geometrical system. Thus, in vitro experimental studies are frequently conducted with a more or less biomimetic nasal replica. AIM: This study is devoted to the development of an anatomically realistic nose model with bilateral nasal cavities, i.e. nasal anatomy, airway geometry and aerodynamic properties as close as possi...

  20. Anatomical and functional assemblies of brain BOLD oscillations

    OpenAIRE

    Baria, Alexis T.; Baliki, Marwan N; Parrish, Todd; Apkarian, A. Vania

    2011-01-01

    Brain oscillatory activity has long been thought to have spatial properties, the details of which are unresolved. Here we examine spatial organizational rules for the human brain oscillatory activity as measured by blood oxygen level-dependent (BOLD). Resting state BOLD signal was transformed into frequency space (Welch’s method), averaged across subjects, and its spatial distribution studied as a function of four frequency bands, spanning the full bandwidth of BOLD. The brain showed anatomic...

  1. An anatomic gene expression atlas of the adult mouse brain

    OpenAIRE

    Ng, Lydia; Bernard, Amy; Lau, Chris; Overly, Caroline C.; Dong, Hong-Wei; Kuan, Chihchau; Pathak, Sayan; Sunkin, Susan M.; Dang, Chinh; Bohland, Jason W.; Bokil, Hemant; Mitra, Partha P.; Puelles, Luis; Hohmann, John; Anderson, David J.

    2009-01-01

    Studying gene expression provides a powerful means of understanding structure-function relationships in the nervous system. The availability of genome-scale in situ hybridization datasets enables new possibilities for understanding brain organization based on gene expression patterns. The Anatomic Gene Expression Atlas (AGEA) is a new relational atlas revealing the genetic architecture of the adult C57Bl/6J mouse brain based on spatial correlations across expression data for thousands of gene...

  2. Variability of acorn anatomical characteristics in Quercus robur L. genotypes

    OpenAIRE

    Nikolić Nataša P.; Merkulov Ljiljana S.; Krstić Borivoj Đ.; Pajević Slobodanka P.; Borišev Milan K.; Orlović Saša S.

    2010-01-01

    The aim of this study was to examine variability of acorn anatomical characteristics in seventeen Quercus robur L. genotypes. Acorns were collected in clonal seed orchard Banov Brod (Srem, Vojvodina, Serbia). Microscopic measurements were done for pericarp (total thickness, thickness of exocarp and mesocarp), seed coat (total thickness, thickness of outer epidermis, parenchyma, and inner epidermis), and embryo axis (diameter, thickness of cortical region, and diameter of stellar zone). Obtain...

  3. Avoidance of generic competition by Abbott Laboratories' fenofibrate franchise.

    Science.gov (United States)

    Downing, Nicholas S; Ross, Joseph S; Jackevicius, Cynthia A; Krumholz, Harlan M

    2012-05-14

    The ongoing debate concerning the efficacy of fenofibrate has overshadowed an important aspect of the drug's history: Abbott Laboratories, the maker of branded fenofibrate, has produced several bioequivalent reformulations that dominate the market, although generic fenofibrate has been available for almost a decade. This continued use of branded formulations, which cost twice as much as generic versions of fenofibrate, imposes an annual cost of approximately $700 million on the US health care system. Abbott Laboratories maintained its dominance of the fenofibrate market in part through a complex switching strategy involving the sequential launch of branded reformulations that had not been shown to be superior to the first-generation product and patent litigation that delayed the approval of generic formulations. The small differences in dose of the newer branded formulations prevented their substitution with generics of older-generation products. As soon as direct generic competition seemed likely at the new dose level, where substitution would be allowed, Abbott would launch another reformulation, and the cycle would repeat. Based on the fenofibrate example, our objective is to describe how current policy can allow pharmaceutical companies to maintain market share using reformulations of branded medications, without demonstrating the superiority of next-generation products. PMID:22493409

  4. Is generic rifaximin still a poorly absorbed antibiotic? A comparison of branded and generic formulations in healthy volunteers.

    Science.gov (United States)

    Blandizzi, Corrado; Viscomi, Giuseppe Claudio; Marzo, Antonio; Scarpignato, Carmelo

    2014-07-01

    Rifaximin is an antibiotic, locally acting in the gastrointestinal tract, which may exist in different crystal as well as amorphous forms. The branded rifaximin formulation contains the polymorph rifaximin-α, whose systemic bioavailability is very limited. This study was performed to compare the pharmacokinetics of this formulation with that of a generic product, whose composition in terms of solid state forms of the active pharmaceutical ingredient was found to be different. Two tablets (2×200mg) of branded and generic formulations were given to 24 healthy volunteers of either sex, according to a single-blind, randomized, two-treatment, single-dose, two-period, cross-over design. Plasma and urinary samples were collected at preset times (for 24h or 48h, respectively) after dosing, and assayed for rifaximin concentrations by high-performance liquid chromatography-mass spectrometry. Rifaximin plasma and urine concentration-time profiles showed relevant differences when generic and branded rifaximin were compared. Most pharmacokinetic parameters were significantly higher after administration of generic rifaximin than after rifaximin-α. In particular, the differences for Cmax, AUC and cumulative urinary excretion between the generic formulation and the branded product ranged from 165% to 345%. The few adverse events recorded were not serious and not related to study medications. The results of the present investigation demonstrate different systemic bioavailability of generic and branded formulations of rifaximin. As a consequence, the therapeutic results obtained with rifaximin-α should not be translated sic et simpliciter to the generic formulations of rifaximin, which do not claim containing only rifaximin-α and will display significantly higher systemic absorption in both health and disease. PMID:24836868

  5. The Essential Anatomical Subunit Approximation Unilateral Cleft Lip Repair.

    Science.gov (United States)

    Chong, David K; Swanson, Jordan W

    2016-07-01

    The anatomical subunit approximation cleft lip repair advantageously achieves a balanced lip contour, with the line of repair hidden along seams of aesthetic subunits. Dr. David Fisher's original description of the repair reflects the considerable thought that went into the evolution of his design. As his technique has gained acceptance in the intervening 10 years, the authors note several key principles embodied in it that represent a shift in the cleft lip repair paradigm. The authors believe understanding these principles is important to mastery of the anatomical subunit technique, and facilitate its teaching. First, design a plan that adheres to anatomical subunits and perform measurements precisely. Second, identify and adequately release each cleft tissue layer from the lip and nose to enable restoration of balance. Third, drive surgical approximation through inset of the lateral muscle into the superiorly backcut medial orbicularis muscle, followed by skin closure with inferior triangle interposition above the white roll. In this article, the authors present essential components of the technique, and identify several principles that enable its successful execution. PMID:27348690

  6. A Comparative Study of Radiographic Images on Normal Anatomical Structures

    International Nuclear Information System (INIS)

    To compare radiographic images of Digora system and Ektaspeed Plus film obtained from normal adults. Storage phosphor plate (SPP) was placed in a film holder behind Ektaspeed Plus film package without lead foil. The effect of film on SPP was studied in a separate in vitro experiment. Forty-seven sets of images were prepared for the evaluation. The regions of interest (ROI) for evaluation were designated at seven sites including normal anatomical structures. The image quality for each ROI was evaluated on enhanced and unenhanced storage phosphor (SP) images and Ektaspeed Plus film. Two film-SPP configurations showed significantly different grey levels at each step of the aluminum step wedge (p<0.05). The contrasts were comparable. Enhanced SP images were significantly superior to unenhanced images and film in all anatomical structures (p<0.01). The differences between unenhanced SP images and film were significant (p<0.05) except root canal and cortical bone on alveolar crest. For anatomical items, there were statistically significant difference among five observers (p<0.05). The image quality of enhanced SP images were superior to Ektaspeed Plus film, and Digora system is potentially applicable to clinical diagnosis.

  7. Anatomic variations of anterior cerebral artery cortical branches.

    Science.gov (United States)

    Stefani, M A; Schneider, F L; Marrone, A C; Severino, A G; Jackowski, A P; Wallace, M C

    2000-01-01

    The anterior cerebral artery (ACA) is a major vessel responsible for the blood supply to the interhemispheric region. The ACA segment after the anterior communicating artery (AComA) origin is called the distal ACA and has central and cortical branches. The cortical branches are distributed in the different regions of the orbital and medial part of the brain. The objects of this study are the anatomical variations found in the distal ACA. In 76 hemispheres the ACA distal branches were injected with latex and dissected under microscope magnification. Vessel diameters and distances between vessel origins and anterior communicating artery were recorded and analyzed. Microsurgical dissection was carried out to demonstrate anatomic variations of these vessels. Average diameter of ACA at origin was 2.61 +/- 0.34 mm and average diameter of cortical branches diameter ranged from 0.79 +/- 0.27 mm to 1.84 +/- 0.3 mm. Distances between vessel origin and AComA ranged from 7.68 +/- 3.91 mm (orbitofrontal) to 112.6 +/- 11.63 mm (inferior internal parietal). This study found anatomical variations: a single (azygos) ACA was present in one case and three in three cases. Crossing branches of the distal ACA to the contralateral hemisphere were present in 26% of the cases. In some cases a single ACA may supply the posterior hemispheric region through crossing branches. This calls attention to potential bilateral brain infarcts due to a single unilateral ACA occlusion. PMID:10873213

  8. Detection and analysis of statistical differences in anatomical shape.

    Science.gov (United States)

    Golland, Polina; Grimson, W Eric L; Shenton, Martha E; Kikinis, Ron

    2005-02-01

    We present a computational framework for image-based analysis and interpretation of statistical differences in anatomical shape between populations. Applications of such analysis include understanding developmental and anatomical aspects of disorders when comparing patients versus normal controls, studying morphological changes caused by aging, or even differences in normal anatomy, for example, differences between genders. Once a quantitative description of organ shape is extracted from input images, the problem of identifying differences between the two groups can be reduced to one of the classical questions in machine learning of constructing a classifier function for assigning new examples to one of the two groups while making as few misclassifications as possible. The resulting classifier must be interpreted in terms of shape differences between the two groups back in the image domain. We demonstrate a novel approach to such interpretation that allows us to argue about the identified shape differences in anatomically meaningful terms of organ deformation. Given a classifier function in the feature space, we derive a deformation that corresponds to the differences between the two classes while ignoring shape variability within each class. Based on this approach, we present a system for statistical shape analysis using distance transforms for shape representation and the support vector machines learning algorithm for the optimal classifier estimation and demonstrate it on artificially generated data sets, as well as real medical studies. PMID:15581813

  9. The Intermingled History of Occupational Therapy and Anatomical Education: A Retrospective Exploration

    Science.gov (United States)

    Carroll, Melissa A.; Lawson, Katherine

    2014-01-01

    Few research articles have addressed the anatomical needs of entry-level occupational therapy students. Given this paucity of empirical evidence, there is a lack of knowledge regarding anatomical education in occupational therapy. This article will primarily serve as a retrospective look at the inclusion of anatomical education in the occupational…

  10. A proof of Connelly's conjecture on 3-connected generic cycles

    DEFF Research Database (Denmark)

    Berg, Alex Rune; Jordán, Tibor

    2001-01-01

    A graph G = (V , E) is called a generic circuit if |E| = 2|V| - 2 and every X ⊂ V with 2 ≥ |X| ≥ |V| - 1 satisfies i(X) ≤ 2|X| - 3. Here i(X) denotes the number of edges induced by X. The operation extension subdivides an edge uw of a graph by a new vertex v and adds a new edge vz for some vertex z...... ≠ u, w. Connelly conjectured that every 3-connected generic circuit can be obtained from K4 by a sequence of extensions. We prove this conjecture. As a corollary, we also obtain a special case of a conjecture of Hendrickson on generically globally rigid graphs....

  11. Towards emotion modeling based on gaze dynamics in generic interfaces

    DEFF Research Database (Denmark)

    Vester-Christensen, Martin; Leimberg, Denis; Ersbøll, Bjarne Kjær;

    2005-01-01

    Gaze detection can be a useful ingredient in generic human computer interfaces if current technical barriers are overcome. We discuss the feasibility of concurrent posture and eye-tracking in the context of single (low cost) camera imagery. The ingredients in the approach are posture and eye regi...... extraction based on active appearance modeling and eye tracking using a new fast and robust heuristic. The eye tracker is shown to perform well for low resolution image segments, hence, making it feasible to estimate gaze using a single generic camera.......Gaze detection can be a useful ingredient in generic human computer interfaces if current technical barriers are overcome. We discuss the feasibility of concurrent posture and eye-tracking in the context of single (low cost) camera imagery. The ingredients in the approach are posture and eye region...

  12. Light-front holographic QCD with generic dilaton profile

    CERN Document Server

    Guo, Zhaoheng; Ma, Bo-Qiang

    2016-01-01

    We generalize the soft-wall and hard-wall models to a light-front holographic QCD model with a generic dilaton profile. The effective potential induced by a higher power dilaton profile is interpreted as a stronger color confinement at long distance, and it gradually evolves to the hard-wall model when the power increases to infinity. As an application, we investigate the exotic meson states recently discovered in experiments in the generic soft-wall model with a higher power dilaton profile, and the results are in agreement with the spectra of the exotic mesons. Our calculation indicates a weaker interaction at short distance and a stronger interaction at large distance for the components in the exotic mesons. The generic dilaton profile deserves further scrutiny for understanding the strong interaction and for applications.

  13. Light-front holographic QCD with generic dilaton profile

    Science.gov (United States)

    Guo, Zhaoheng; Liu, Tianbo; Ma, Bo-Qiang

    2016-04-01

    We generalize the soft-wall and hard-wall models to a light-front holographic QCD model with a generic dilaton profile. The effective potential induced by a higher power dilaton profile is interpreted as a stronger color confinement at long distance, and it gradually evolves to the hard-wall model when the power increases to infinity. As an application, we investigate the exotic meson states recently discovered in experiments in the generic soft-wall model with a higher power dilaton profile, and the results are in agreement with the spectra of the exotic mesons. Our calculation indicates a weaker interaction at short distance and a stronger interaction at large distance for the components in the exotic mesons. The generic dilaton profile deserves further scrutiny for understanding the strong interaction and for applications.

  14. Administrative building

    OpenAIRE

    Vokatá, Kateřina

    2015-01-01

    The task of my master´s thesis was to work up a project and a check of a bearing steel construction the multi-storey office building with a garage in Brno. The building is composed of five storey office section and two storey of garage. Ground dimension of administrative part is 38,8m x 35m with distance of pillars 7m,6m and 6,4m. The structural height of floor is 3,5m.Garage is designed with dimensions 36m x 24,8m with structural height of floor 3,5m. Distance of pillars is 5,6m, 6,4m and 7,...

  15. Building economics

    DEFF Research Database (Denmark)

    Pedersen, D.O.(red.)

    Publikationen er på engelsk. Den omfatter alle indlæg på det fjerde internationale symposium om byggeøkonomi, der blev arrangeret af SBI for det internationale byggeforskningsråd CIB. De fem bind omhandler: Methods of Economic Evaluation, Design Optimization, Ressource Utilization, The Building...... Market og Economics and Technological Forecasting in Construction. Et indledende bind bringer statusrapporter for de fem forskningsområder, og det sidste bind sammenfatter debatten på symposiet....

  16. Model Building

    OpenAIRE

    Frampton, Paul H.

    1997-01-01

    In this talk I begin with some general discussion of model building in particle theory, emphasizing the need for motivation and testability. Three illustrative examples are then described. The first is the Left-Right model which provides an explanation for the chirality of quarks and leptons. The second is the 331-model which offers a first step to understanding the three generations of quarks and leptons. Third and last is the SU(15) model which can accommodate the light leptoquarks possibly...

  17. Building Inclusion

    OpenAIRE

    Jeanet Kullberg; Isik Kulu-Glasgow

    2009-01-01

    The social inclusion of immigrants and ethnic minorities is a central issue in many European countries. Governments face challenges in ensuring housing for immigrants, delivering public services, promoting neighbourhood coexistence and addressing residential segregation. The Building Inclusion project, sponsored by the European Commission, enables EU member states to exchange experiences relating to the social inclusion of vulnerable groups. Its special focus is on housing access and housing ...

  18. UAF: a generic OPC unified architecture framework

    Science.gov (United States)

    Pessemier, Wim; Deconinck, Geert; Raskin, Gert; Saey, Philippe; Van Winckel, Hans

    2012-09-01

    As an emerging Service Oriented Architecture (SOA) specically designed for industrial automation and process control, the OPC Unied Architecture specication should be regarded as an attractive candidate for controlling scientic instrumentation. Even though an industry-backed standard such as OPC UA can oer substantial added value to these projects, its inherent complexity poses an important obstacle for adopting the technology. Building OPC UA applications requires considerable eort, even when taking advantage of a COTS Software Development Kit (SDK). The OPC Unied Architecture Framework (UAF) attempts to reduce this burden by introducing an abstraction layer between the SDK and the application code in order to achieve a better separation of the technical and the functional concerns. True to its industrial origin, the primary requirement of the framework is to maintain interoperability by staying close to the standard specications, and by expecting the minimum compliance from other OPC UA servers and clients. UAF can therefore be regarded as a software framework to quickly and comfortably develop and deploy OPC UA-based applications, while remaining compatible to third party OPC UA-compliant toolkits, servers (such as PLCs) and clients (such as SCADA software). In the rst phase, as covered by this paper, only the client-side of UAF has been tackled in order to transparently handle discovery, session management, subscriptions, monitored items etc. We describe the design principles and internal architecture of our open-source software project, the rst results of the framework running at the Mercator Telescope, and we give a preview of the planned server-side implementation.

  19. Highly Damped Quasinormal Modes of Generic Single Horizon Black Holes

    CERN Document Server

    Daghigh, R G; Daghigh, Ramin G.; Kunstatter, Gabor

    2005-01-01

    We calculate analytically the highly damped quasinormal mode spectra of generic single-horizon black holes using the rigorous WKB techniques of Andersson and Howls\\cite{Andersson}. We thereby provide a firm foundation for previous analysis, and point out some of their possible limitations. The numerical coefficient in the real part of the highly damped frequency is generically determined by the behavior of coupling of the perturbation to the gravitational field near the origin, as expressed in tortoise coordinates. This fact makes it difficult to understand how the famous $ln(3)$ could be related to the quantum gravitational microstates near the horizon.

  20. HTGR generic technology program. Semiannual report ending March 31, 1980

    Energy Technology Data Exchange (ETDEWEB)

    1980-05-01

    This document reports the technical accomplishments on the HTGR Generic Technology Program at General Atomic during the first half of FY-80. It covers a period when the design direction of the National HTGR Program is in the process of an overall review. The HTGR Generic Technology Program activities have continued so as to provide the basic technology required for all HTGR applications. The activities include the need to develop an MEU fuel and the need to qualify materials and components for the higher temperatures of the gas turbine and process heat plants.

  1. Generic data acquisition system for robotic waste characterization

    International Nuclear Information System (INIS)

    This paper describes a generic data acquisition system for robotic characterization of DOE production facilities and waste sites. While the specific suite of characterization sensors on the end of a robotic arm or vehicle will depend on site needs, many of the data acquisition, display, archival and interpretation requirements of the sites are common. Therefore, the objective is to create a generic, reusable computing and data acquisition system which can accept a multitude of sensors. This paper discusses the progress to date and future plans for the system

  2. Diagonal representation for a generic matrix valued quantum Hamiltonian

    International Nuclear Information System (INIS)

    A general method to derive the diagonal representation for a generic matrix valued quantum Hamiltonian is proposed. In this approach new mathematical objects like non-commuting operators evolving with the Planck constant promoted as a running variable are introduced. This method leads to a formal compact expression for the diagonal Hamiltonian which can be expanded in a power series of the Planck constant. In particular, we provide an explicit expression for the diagonal representation of a generic Hamiltonian to the second order in the Planck constant. This result is applied, as a physical illustration, to Dirac electrons and neutrinos in external fields. (orig.)

  3. HTGR generic technology program. Semiannual report ending March 31, 1980

    International Nuclear Information System (INIS)

    This document reports the technical accomplishments on the HTGR Generic Technology Program at General Atomic during the first half of FY-80. It covers a period when the design direction of the National HTGR Program is in the process of an overall review. The HTGR Generic Technology Program activities have continued so as to provide the basic technology required for all HTGR applications. The activities include the need to develop an MEU fuel and the need to qualify materials and components for the higher temperatures of the gas turbine and process heat plants

  4. Increasing generic engineering competences using coaching and personal feedback

    DEFF Research Database (Denmark)

    Jørgensen, Ivan Harald Holger; Marker-Villumsen, Niels

    2014-01-01

    problem solving methodology. In order to create an environment for the students to practice their generic engineering competences they are throughout the course provided personal feedback by the teacher using a four step feedback model. The course was evaluated using the Course Evaluation Questionnaire...... objective, teaching activities and the assessment are presented and it is demonstrated how coaching and personal feedback – often used in the industry – is used to improve the generic engineering competences of the students in alignment with CDIO. The course is conducted as if it was a project in a company...

  5. Generic experiments at the sump model 'Zittauer Stroemungswanne' (ZSW) for the behaviour of mineral wool in the sump and the reactor core

    International Nuclear Information System (INIS)

    The investigation of insulation debris transport, sedimentation, penetration into the reactor core and head loss build up becomes important to reactor safety research for PWR and BWR, when considering the long-term behaviour of emergency core cooling systems during loss of coolant accidents. Research projects are being performed in cooperation between the University of Applied Sciences Zittau/Goerlitz and the Helmholtz-Zentrum Dresden-Rossendorf. The projects include experimental investigations of different processes and phenomena of insulation debris in coolant flow and the development of CFD models. Generic complex experiments serve for building up a data base for the validation of models for single effects and their coupling in CFD codes. This paper includes the description of the experimental facility for complex generic experiments (ZSW), an overview about experimental boundary conditions and results for upstream and down-stream phenomena as well as for the long-time behaviour due to corrosive processes. (orig.)

  6. Anatomical Studies on Several Species of Heliotropium L. in Iran

    Directory of Open Access Journals (Sweden)

    Maryam ABBASI

    2011-11-01

    Full Text Available Heliotropium spp. is distributed worldwide mainly in tropical and subtropical regions, with dry and warm temperate to semi-arid regions so that Southwest and center of Asia have considered as the main centre of origin and diversity of Heliotropium genus. Iran, with 32 species and 14 (sub endemic species, has the highest diversity in the world followed by Pakistan and Turkey with 15 species and only one endemic species and the Arabian Peninsula with 15 species and three endemic species are in the next ranks. In order to anatomical studies on Heliotropium, twelve species of this genus were selected from different regions of Iran. The selected species included: H. bacciferum Forssk., H. ramossisimum BGE., H. brevilimb Boiss., H. transoxanum BGE., H. dasycarpum Ledeb, H. dyginum Forssk., H. aucheri Dc., H. carmanicum BGE. As perennial group and H. ellipticum Ledeb., H. lasiocarpum Fisch., H. suaveolens M.B. as annual group. In order to add more data to leaf anatomy characters, evaluating of systematic relevance and/or adaptive value of the morphological and anatomical diversity we have studied 24 anatomical characters in theses 12 species. For example shape and vascular bundles of main midrib, type of parenchyma cells located under lower epidermis of midrib, distance between vascular bundles and lower or upper epidermis, angle of between two parts of blade, number of cellular layers in lower or upper mesophylla, length of upper and lower mesophylla, type of cell wall in lower and upper mesophylla and thickness of lamina were investigated in this study. In order to this present obtained H. aucheri can be separated from H. carmanicum in H. aucheri subsp. carmanicum. It can be conclude that two species H. aucheri and H. carmanicum are independent species and can accept H. transoxanum as a sub group of H. dasycarpum.

  7. A generic converter for experimentation based power electronics learning

    OpenAIRE

    Leite, V; Barbosa, José; Teixeira, H.; Araújo, R.

    2005-01-01

    This paper presents a low cost, modular, configurable and fully protected education tool based on a generic electronic converter to be used by students, providing them with skills regarding power electronics and converters, and enabling them to learn from experience the most important issues concerning DC and AC electric drives.

  8. Effective field theories on solitons of generic shapes

    Energy Technology Data Exchange (ETDEWEB)

    Gudnason, Sven Bjarke, E-mail: bjarke@impcas.ac.cn [Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); Nordita, KTH Royal Institute of Technology and Stockholm University, Roslagstullsbacken 23, SE-106 91 Stockholm (Sweden); Nitta, Muneto, E-mail: nitta@phys-h.keio.ac.jp [Department of Physics, and Research and Education Center for Natural Sciences, Keio University, Hiyoshi 4-1-1, Yokohama, Kanagawa 223-8521 (Japan)

    2015-07-30

    A class of effective field theories for moduli or collective coordinates on solitons of generic shapes is constructed. As an illustration, we consider effective field theories living on solitons in the O(4) non-linear sigma model with higher-derivative terms.

  9. Spiraling elliptic solitons in generic nonlocal nonlinear media

    OpenAIRE

    Liang, Guo; Shou, Qian; Guo, Qi

    2011-01-01

    We have introduced a class of spiraling elliptic solitons in generic nonlocal nonlinear media. The spiraling elliptic solitons carry the orbital angular momentum. This class solitons are stable for any degree of nonlocality except for the local case when the response function of the material is Gaussian function.

  10. Toward a generic model of trust for electronic commerce

    NARCIS (Netherlands)

    Tan, YH; Thoen, W

    2000-01-01

    The authors present a generic model of trust for electronic commerce consisting of two basic components, party trust and control trust, based on the concept that trust in a transaction with another party combines trust in the other parry and trust in the control mechanisms that ensure the successful

  11. Optimal, Generic Planning of Maintenance and Inspection of Steel Bridges

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Faber, M.H.

    2002-01-01

    Fatigue damage is an important deterioration mechanism for steel bridges. This paper describes a simplified and generic approach for reliability and risk based inspection planning of fatigue sensitive structural details. Fatigue sensitive details are categorized according to their loading...... welded connections in steel bridges....

  12. An approach towards generic coastal geomorphological moedelling with applications

    NARCIS (Netherlands)

    Ye, Q.

    2012-01-01

    This thesis presents the development a generic morphological model for both structured and unstructured grid and the extension to a biogeomorphological model. For the morphological model, numerical algorithms are adjusted to adapt unstructured grid and are validated against analytical solutions and

  13. A Generic Solution to Realize Public Verifiability of Signcryption

    Institute of Scientific and Technical Information of China (English)

    LEI Feiyu; CHEN Wen; CHEN Kefei

    2006-01-01

    Signcryption has been a rapidly emerging efficient approach to achieve authenticity and confidentiality within a logic single step. However, it is still a difficult problem to realize public verifiability of signcryption in an efficient and secure way. Here, we present a generic solution to realize public verifiability based on quadratic residue.

  14. Performance Analysis of GAME: A Generic Automated Marking Environment

    Science.gov (United States)

    Blumenstein, Michael; Green, Steve; Fogelman, Shoshana; Nguyen, Ann; Muthukkumarasamy, Vallipuram

    2008-01-01

    This paper describes the Generic Automated Marking Environment (GAME) and provides a detailed analysis of its performance in assessing student programming projects and exercises. GAME has been designed to automatically assess programming assignments written in a variety of languages based on the "structure" of the source code and the correctness…

  15. A Narrative Review of Generic Intervention Fidelity Measures

    Science.gov (United States)

    Di Rezze, Briano; Law, Mary; Gorter, Jan Willem; Eva, Kevin; Pollock, Nancy

    2012-01-01

    To increase the rigor of pediatric rehabilitation research, there is a need to evaluate the degree to which an intervention is conducted as planned (i.e., fidelity). Generic fidelity measures evaluate more than one intervention and often include nonspecific attributes of the therapy process common to both interventions. The objective of this study…

  16. 40 CFR 721.5762 - Aromatic aldehyde phenolic resin (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Aromatic aldehyde phenolic resin... Specific Chemical Substances § 721.5762 Aromatic aldehyde phenolic resin (generic). (a) Chemical substance... aromatic aldehyde phenolic resin (PMN P-01-573) is subject to reporting under this section for...

  17. 40 CFR 721.10099 - Dialkyl dimethyl ammonium carbonate (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Dialkyl dimethyl ammonium carbonate... Specific Chemical Substances § 721.10099 Dialkyl dimethyl ammonium carbonate (generic). (a) Chemical... as dialkyl dimethyl ammonium carbonate (1:1) (PMN P-03-715) is subject to reporting under...

  18. Effective field theories on solitons of generic shapes

    Directory of Open Access Journals (Sweden)

    Sven Bjarke Gudnason

    2015-07-01

    Full Text Available A class of effective field theories for moduli or collective coordinates on solitons of generic shapes is constructed. As an illustration, we consider effective field theories living on solitons in the O(4 non-linear sigma model with higher-derivative terms.

  19. Switching to generic anti-epileptic medicines : A regulatory perspective

    NARCIS (Netherlands)

    Maliepaard, Marc; Hekster, Yechiel A.; Kappelle, Arnoud; Van Puijenbroek, Eugène P.; Elferink, André J.; Welink, Jan; Gispen-de Wied, Christine C.; Lekkerkerker, Frits J.F.

    2010-01-01

    Introduction: Currently, there is a lot of discussion about whether generic substitution of anti-epileptic drugs (AEDs) with the same active moiety but from different manufacturers can take place safely. Many AEDs are considered to have a narrow therapeutic index, and the consequences of an epilepti

  20. The use of generic medications for hepatitis C.

    Science.gov (United States)

    Freeman, James A D; Hill, Andrew

    2016-07-01

    Hepatitis C, hepatitis B, HIV, TB and malaria are the five major causes of infectious disease death worldwide. In a breakthrough that rivals the invention of penicillin, drugs that cure hepatitis C, with minimal side effects and high success rates, have reached the market, but, in what must be one of the greatest tragedies of modern times, these life-saving medications are not being deployed on a mass scale. Pharmaceutical patents are gifted to private corporations by governments for the dual purposes of protecting R&D expenditure and encouraging innovation. Unfortunately the monopoly pricing power these patents provision currently lacks adequate checks and balances, is open to abuse, and is quite clearly being abused. The sort of legislative changes required to deliver on the original goals of pharmaceutical patents will take years or even decades to eventuate. Parallel importation of generic medication offers hope to the millions of patients with HCV unable to afford access to vastly overpriced originator medications. Doctors prescribing and monitoring patients taking generics can take comfort from the fact that the REDEMPTION trial results show, like the HIV generics that came before them, that HCV generics deliver robust clinical results. PMID:27306303

  1. Analogical reasoning for reliability analysis based on generic data

    Energy Technology Data Exchange (ETDEWEB)

    Kozin, Igor O

    1996-10-01

    The paper suggests using the systemic concept 'analogy' for the foundation of an approach to analyze system reliability on the basis of generic data, describing the method of structuring the set that defines analogical models, an approach of transition from the analogical model to a reliability model and a way of obtaining reliability intervals of analogous objects.

  2. A psychoanalytic child psychotherapy contribution to generic assessments.

    Science.gov (United States)

    Mees, Peta

    2016-01-01

    Psychoanalytically trained child and adolescent psychotherapists have applied psychodynamic thinking to family work, consultations and brief work for some time. Findings from a research project in which the author investigated the processes involved in generic assessments undertaken by herself and what actually takes place are presented. A description of some skills and techniques used by the author are also described. PMID:25604706

  3. 40 CFR 721.9490 - Coco alklydimethyl amine salts (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Coco alklydimethyl amine salts... Specific Chemical Substances § 721.9490 Coco alklydimethyl amine salts (generic). (a) Chemical substances... coco alkyldimethyl amine salts (PMNs P-98-412/414/415/416/417) are subject to reporting under...

  4. 40 CFR 721.4365 - Substituted ethoxylated hydrocarbon (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Substituted ethoxylated hydrocarbon... Specific Chemical Substances § 721.4365 Substituted ethoxylated hydrocarbon (generic). (a) Chemical... as Substituted ethoxylated hydrocarbon (PMN P-99-0313) is subject to reporting under this section...

  5. 40 CFR 721.10043 - Dineopentyl-4-substituted phthalate (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Dineopentyl-4-substituted phthalate... Specific Chemical Substances § 721.10043 Dineopentyl-4-substituted phthalate (generic). (a) Chemical... as dineopentyl-4-substituted phthalate (PMN P-02-697) is subject to reporting under this section...

  6. Some advances on generic properties of the Oseledets splitting

    CERN Document Server

    Hertz, J Rodriguez

    2010-01-01

    In his foundational paper [ICM 1983, Warzaw], Ma\\~n\\'e suggested that some aspects of the Oseledets splitting could be improved if one worked under C1-generic conditions. He announced some powerful theorems, and suggested some lines to follow. Here we survey the state of the art and some recent advances in these directions.

  7. Generic and energy-efficient context-aware mobile sensing

    CERN Document Server

    Yurur, Ozgur

    2015-01-01

    This book proposes novel context-inferring algorithms and generic framework designs to enhance the existing tradeoffs in mobile sensing, especially between accuracy and power consumption. It integrates the significant topics of energy efficient, inhomogeneous, adaptive, optimal context-aware inferring algorithm and framework design. In addition, it includes plenty of examples to help readers understand the theory, best practices, and strategies.

  8. A generic optimization algorithm for the allocation of DP actuators

    NARCIS (Netherlands)

    E.F.G. van Daalen; J.L. Cozijn; C. Loussouarn; P.W. Hemker

    2011-01-01

    In this paper we present a generic optimization algorithm for the allocation of dynamic positioning actuators, such as azimuthing thrusters and fixed thrusters. The algorithm is based on the well-known Lagrange multipliers method. In the present approach the Lagrangian functional represents not only

  9. 40 CFR 721.9513 - Modified magnesium silicate polymer (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Modified magnesium silicate polymer... Specific Chemical Substances § 721.9513 Modified magnesium silicate polymer (generic). (a) Chemical... as modified magnesium silicate polymer (PMN P-98-604) is subject to reporting under this section...

  10. Ear-EEG from generic earpieces: A feasibility study

    DEFF Research Database (Denmark)

    Kidmose, Preben; Looney, D; Jochumsen, Lars;

    2013-01-01

    The use of brain monitoring based on EEG, in natural environments and over long time periods, is hindered by the limited portability of current wearable systems, and the invasiveness of implanted systems. To that end, we introduce an ear-EEG recording device based on generic earpieces which meets...

  11. Implementation of IEC Generic Model Type 1A using RTDS

    DEFF Research Database (Denmark)

    Cha, Seung-Tae; Wu, Qiuwei; Zhao, Haoran;

    2012-01-01

    This paper presents the implementation of the IEC generic model of Type 1 wind turbine generator (WTG) in the real time digital simulator (RTDS) environment. The model is based on the IEC 61400 TC88 under wind turbine working group’s standardization efforts are implemented. Several case studies...

  12. How generic scale invariance influences quantum and classical phase transitions

    International Nuclear Information System (INIS)

    This review discusses a paradigm that has become of increasing importance in the theory of quantum phase transitions, namely, the coupling of the order-parameter fluctuations to other soft modes and the resulting impossibility of constructing a simple Landau-Ginzburg-Wilson theory in terms of the order parameter only. The soft modes in question are manifestations of generic scale invariance, i.e., the appearance of long-range order in whole regions in the phase diagram. The concept of generic scale invariance and its influence on critical behavior is explained using various examples, both classical and quantum mechanical. The peculiarities of quantum phase transitions are discussed, with emphasis on the fact that they are more susceptible to the effects of generic scale invariance than their classical counterparts. Explicit examples include the quantum ferromagnetic transition in metals, with or without quenched disorder; the metal-superconductor transition at zero temperature; and the quantum antiferromagnetic transition. Analogies with classical phase transitions in liquid crystals and classical fluids are pointed out, and a unifying conceptual framework is developed for all transitions that are influenced by generic scale invariance

  13. Generic Engineering Competencies: A Review and Modelling Approach

    Science.gov (United States)

    Male, Sally A.

    2010-01-01

    This paper puts forward the view that engineering educators have a responsibility to prepare graduates for engineering work and careers. The current literature reveals gaps between the competencies required for engineering work and those developed in engineering education. Generic competencies feature in these competency gaps. Literature suggests…

  14. A proposal for generic competence assessment in a serious game

    Directory of Open Access Journals (Sweden)

    María José Bezanilla

    2014-01-01

    Full Text Available This paper focuses on the design of a serious game for the teaching and assessment of generic competences, placing particular emphasis on the competences assessment aspect. Taking into account important aspects of competence assessment such as context, feedback and transparency, among other aspects, and using the University of Deusto's Generic Competences Assessment Model based on the defining of levels, indicators and descriptors as a reference point, a serious game has been designed for the development and evaluation of two Generic Competences: Problem Solving and Entrepreneurship, aimed at final-year undergraduate and first-year postgraduate students. The design process shows that having a Competence Assessment Model based on levels, indicators and descriptors is of great help in defining the game's scenarios and learning and assessment activities. Serious games can also be excellent resources to help in the development and assessment of generic competences, but not as a unique tool, since the concept of competence in itself is highly complex (integrating knowledge, skills, attitudes and values and some elements might require other methods and techniques for its development. It also reveals the difficulties of evaluating competences in general and through serious games in particular.

  15. 40 CFR 721.10120 - Siloxane modified alumina nanoparticles (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Siloxane modified alumina... Specific Chemical Substances § 721.10120 Siloxane modified alumina nanoparticles (generic). (a) Chemical... as siloxane modified alumina nanoparticles (PMN P-05-687) is subject to reporting under this...

  16. 40 CFR 721.10003 - Manganese heterocyclic tetraamine complex (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Manganese heterocyclic tetraamine... Specific Chemical Substances § 721.10003 Manganese heterocyclic tetraamine complex (generic). (a) Chemical... as manganese heterocyclic tetraamine complex (PMNs P-98-625/626/627/628/629 and P-00-614/617)...

  17. The Politics of Grammar Handbooks: Generic "He" and Singular "They."

    Science.gov (United States)

    Zuber, Sharon; Reed, Ann M.

    1993-01-01

    Traces the historical development of the authority of grammar handbooks and their current status as monitors of language. Focuses on the evidence that English speakers use the "singular they" and the "generic he." Interprets current handbooks in terms of their social roles and political constructions. (HB)

  18. Integrating Sustainability in Higher Education: A Generic Matrix

    Science.gov (United States)

    Rusinko, Cathy A.

    2010-01-01

    Purpose: The purpose of this paper is to develop a framework in the form of a generic matrix of options for integrating sustainability in higher education (SHE) so that university faculty and administrators can make more appropriate and strategic choices with respect to SHE. Design/methodology/approach: This original matrix draws from and extends…

  19. Like strangers we trust: identity and generic affiliation networks.

    Science.gov (United States)

    Light, Ryan

    2015-05-01

    Sociological research on collective behavior provides strong evidence for the sources of collective action and shared attitudes based on overlapping experience. We know, for example, that members of social movement organizations are likely to share similar beliefs. However, a significant portion of the prior research on shared behaviors or attitudes analyzes individuals who do not know one another. This research using large surveys often infers overlapping experience based on generic connections: People in unions generally or church groups generally are likely to hold similar beliefs or engage in similar behaviors as if they were in the same unions or church groups. In this paper, I challenge this simple inference by arguing that the generic affiliations we hold contribute to our identity. Specifically, our identities can, in part, be seen as a network of overlapping roles based on generic affiliations. Findings indicate the importance of considering generic affiliation networks when modeling trust and political partisanship. Individuals who share multiple affiliations often appear to be similar to one another along a number of socio-demographic dimensions and report similar attitudes. Conclusions highlight the promise and challenge of relational approaches to social life. PMID:25769857

  20. Anatomical reconstruction of the anterior cruciate ligament: a logical approach

    Directory of Open Access Journals (Sweden)

    Julio Cesar Gali

    2015-08-01

    Full Text Available ABSTRACT We describe the surgical approach that we have used over the last years for anterior cruciate ligament (ACL reconstruction, highlighting the importance of arthroscopic viewing through the anteromedial portal (AMP and femoral tunnel drilling through an accessory anteromedial portal (AMP. The AMP allows direct view of the ACL femoral insertion site on the medial aspect of the lateral femoral condyle, does not require guides for anatomic femoral tunnel reaming, prevents an additional lateral incision in the distal third of the thigh (as would be unavoidable when the outside-intechnique is used and also can be used for double-bundle ACL reconstruction.

  1. The investigate of ultrasonography integration into anatomical curriculum

    Institute of Scientific and Technical Information of China (English)

    Li Wenyuan; Wang Ying; Liu Xing; Liu Yaoguang; Teng Chenyi; Ma Yanwen; Wang Yu

    2015-01-01

    As a complementary teaching way, ultrasonography is considered an important teaching tools and methods to improving medical students’ skills and understanding the real time human anatomy . We success-fully integrated ultrasound into anatomy teaching by using portable ultrasound and interactive panel discussion ses-sions. The integrated curriculum not only allows medical students to see the complexity real-time three-dimension-al human anatomy, but also can improve medical students’ interest in anatomy teaching. Integrated ultrasound into anatomy teaching established close ties between basic medical science and its clinical application, and overcome the phase difficulties of anatomical knowledge application from preclinical to clinical.

  2. Correlative CT and anatomic study of the sciatic nerve

    International Nuclear Information System (INIS)

    Sciatica can be caused by numerous processes affecting the sciatic nerve or its components within the pelvis including tumors, infectious diseases, aneurysms, fractures, and endometriosis. The CT diagnosis of these causes of sciatica has not been emphasized. This study identified the course and appearance of the normal sciatic nerve in the pelvis by correlating CT and anatomic slices in cadavers. For purposes of discussion, the sciatic nerve complex is conveniently divided into three parts: presacral, muscular, and ischial. Each part is illustrated here by two cryosections with corresponding CT images

  3. Etymology of homeric anatomical terms for the head and neck

    Directory of Open Access Journals (Sweden)

    Eleni KONSOLAKI, Panagiotis AGGOURIDAKIS, Georgia FRAGAKI, Georgios ROMANOS,

    2011-08-01

    Full Text Available SUMMARY: The search for the origin of medical terms used in every day practice has started since the distant past. Words that refer to the head and the neck can be found as early as in the Homeric epics; many of these have survived in some form in modern languages. Both doctors and philosophers have been concerned with the etymology of medical terminology in studies and dictionaries. This paper presents etymological suggestions for the anatomical terminology of the head and the neck as a useful aid to the oral and maxillofacial surgeon.

  4. Pneumomediastinum: Elucidation of the anatomic pathway by liquid ventilation

    Energy Technology Data Exchange (ETDEWEB)

    Jamadar, D.A.; Kazerooni, E.A.; Hirschl, R.B. [Univ. of Michigan Hospitals, Ann Arbor, MI (United States)

    1996-03-01

    Partial liquid ventilation is a new technique to improve oxygenation in patients with severe acute respiratory distress syndrome. In a patient with status asthmaticus and tension pneumothorax treated with subsequent liquid ventilation, radiopaque perfluorocarbon was identified along bronchovascular structures, in the mediastinum, and in the retroperitoneum. Perfluorocarbon outlined on CT and chest radiography the anatomic pathway by which spontaneous pneumomediastinum develops following alveolar rupture, as described earlier by histopathologic study in animals. This represents the radiopaque equivalent of radiolucent pneumomediastinum. Perfluorocarbon remained in the pulmonary interstitium on radiography 30 days after beginning liquid ventilation, without sequelae. 9 refs., 3 figs.

  5. Sparse decomposition and modeling of anatomical shape variation

    DEFF Research Database (Denmark)

    Sjöstrand, Karl; Rostrup, Egill; Ryberg, Charlotte;

    2007-01-01

    counterparts if constructed carefully. In most medical applications, models are required to have both good statistical performance and a relevant clinical interpretation to be of value. Morphometry of the corpus callosum is one illustrative example. This paper presents a method for relating spatial features to...... anatomical variation related to clinical outcome. In the present application, landmark-based shape data of the corpus callosum is analyzed in relation to age, gender, and clinical tests of walking speed and verbal fluency. To put the data-driven sparse principal component method into perspective, we consider...

  6. Sparse Decomposition and Modeling of Anatomical Shape Variation

    DEFF Research Database (Denmark)

    Sjöstrand, Karl; Rostrup, Egill; Ryberg, Charlotte;

    2007-01-01

    counterparts if constructed carefully. In most medical applications, models are required to have both good statistical performance and a relevant clinical interpretation to be of value. Morphometry of the corpus callosum is one illustrative example. This paper presents a method for relating spatial features to...... anatomical variation related to clinical outcome. In the present application, landmark-based shape data of the corpus callosum is analyzed in relation to age, gender, and clinical tests of walking speed and verbal fluency. To put the data-driven sparse principal component method into perspective, we consider...

  7. Anatomical and Histological Factors Affecting Intranasal Drug and Vaccine Delivery

    OpenAIRE

    Gizurarson, Sveinbjörn

    2012-01-01

    The aim of this review is to provide an understanding of the anatomical and histological structure of the nasal cavity, which is important for nasal drug and vaccine delivery as well as the development of new devices. The surface area of the nasal cavity is about 160 cm2, or 96 m2 if the microvilli are included. The olfactory region, however, is only about 5 cm2 (0.3 m2 including the microvilli). There are 6 arterial branches that serve the nasal cavity, making this region a very attractive r...

  8. MORPHOLOGICAL AND ANATOMICAL RESEARCH OF LEAVES OF FEIJOA SELLOWIANA BERG

    Directory of Open Access Journals (Sweden)

    N. N. Vdovenko-Martynova

    2015-01-01

    Full Text Available Feijoa leaves gathered from Feijoa sellowiana Berg. of Myrtaceae family on the Black Sea coast of the Caucasus were the object of this research. Establishment of morphological and anatomical features for diagnosis of feijoa leaves was the purpose of this work. Using macro- and microscopic analysis methods we have determined external and microdiagnostic features which can be used for development of authenticity of the feijoa leaves active parts.

  9. MR anatomic and flow imaging in peripheral vascular disease

    International Nuclear Information System (INIS)

    MR imaging has been used to identify atherosclerotic plaques and assess their effect on flow in a phantom, in six normal subjects, and in 13 patients with documented peripheral vascular disease. Spin-echo images were acquired in transaxial and oblique planes through the abdominal aorta and iliac arteries, and the findings were compared with those of angiography. MR phase mapping was used to produce velocity profiles and to measure blood flow. Plaques were consistently detected on anatomic images, and luminal narrowing could be assessed by changes in the velocity profiles, MR imaging is a nonivasive method that is of potential importance in the study of atheroma

  10. Tracheal Atresia with Segmental Esophageal Duplication: An Unusual Anatomic Arrangement.

    Science.gov (United States)

    Gaerty, Kirsten; Thomas, Joseph T; Petersen, Scott; Tan, Edwin; Kumar, Sailesh; Gardener, Glenn; Armes, Jane

    2016-01-01

    An unusual anatomic configuration of segmental tracheal agenesis/atresia with esophageal duplication on autopsy in a fetus that demised in utero at 29 weeks is reported. The mother was scanned initially for a cardiac anomaly at 20 weeks and on follow-up scan at 27 weeks had polyhydramnios and underwent amnioreduction. The final autopsy diagnosis was vertebral, ano-rectal, cardiac, tracheoesophageal, renal, and limb malformations (VACTERL). We discuss the autopsy findings along with the embryological mechanisms and compare the configuration with Floyd's classification for tracheal agenesis. The difficulties in prenatal diagnosis are discussed. PMID:26367770

  11. Anatomical eponyms, part 1: to look on the bright side.

    Science.gov (United States)

    Olry, Regis

    2014-11-01

    The use of eponyms in medical sciences generally, and in anatomy specifically, remains controversial. In principle, this discussion should have been concluded as far back as 1895 (publication of the first Nomina anatomica): all eponyms should have been removed from the anatomical vocabulary then. In practice, what was believed to be a mere formality proved much more difficult to apply. Most eponyms remain in current use; moreover, their number goes on increasing. Assuming that there's no smoke without fire, we wondered why it seems impossible to get rid of a specific kind of term. The aim of this article and its successor is to weigh up the pros and cons. PMID:24953603

  12. Geodesic atlas-based labeling of anatomical trees

    DEFF Research Database (Denmark)

    Feragen, Aasa; Petersen, Jens; Owen, Megan; Lo, Pechin; Thomsen, Laura Hohwu; Wille, Mathilde Marie Winkler; Dirksen, Asger; de Bruijne, Marleen

    2015-01-01

    We present a fast and robust atlas-based algorithm for labeling airway trees, using geodesic distances in a geometric tree-space. Possible branch label configurations for an unlabeled airway tree are evaluated using distances to a training set of labeled airway trees. In tree-space, airway tree...... topology and geometry change continuously, giving a natural automatic handling of anatomical differences and noise. A hierarchical approach makes the algorithm efficient, assigning labels from the trachea and downwards. Only the airway centerline tree is used, which is relatively unaffected by pathology...

  13. Nervous Plexopathies in oncologic patients: Anatomical, clinical and radiological Considerations

    International Nuclear Information System (INIS)

    Lumbosacral or brachial plexopathies are lesions of two or more roots of the same plexus. They are very frequent in cancer patients and are usually due to extra spinal involvement of these roots, by a primary or secondary neoplasm. The CT scan is very useful in the evaluation of patients with this disease. In the article anatomic al aspects, the main clinical symptoms and signs, and the performance of CT scan are reviewed with all these elements it is possible to make a diagnosis

  14. Alternatives to Quintessence Model-building

    CERN Document Server

    Pina-Avelino, P; De Carvalho, J P M; Martins, C J; Pinto, P

    2003-01-01

    We discuss the issue of toy model building for the dark energy component of the universe. Specifically, we consider two generic toy models recently proposed as alternatives to quintessence models, known as Cardassian expansion and the Chaplygin gas. We show that the former is enteriely equivalent to a class of quintessence models. We determine the observational constraints on the latter, coming from recent supernovae results and from the shape of the matter power spectrum. As expected, these restrict the model to a behaviour that closely matches that of a standard cosmological constant $\\Lambda$.

  15. Evaluation of Physical Properties of Generic and Branded Travoprost Formulations

    Science.gov (United States)

    Wadhwani, Meenakshi; Mishra, Sanjay K; Velpandian, Thirumurthy; Sihota, Ramanjit; Kotnala, Ankita; Bhartiya, Shibal; Dada, Tanuj

    2016-01-01

    ABSTRACT Purpose: Comparative evaluation of pharmaceutical characteristics of three marketed generic vs branded travoprost formulations. Materials and methods: Three generic travoprost formulations and one branded (Travatan without benzalkonium chloride) formulation (10 vials each), obtained from authorized agents from the respective companies and having the same batch number, were used. These formulations were coded and labels were removed. At a standardized room temperature of 25°C, the drop size, pH, relative viscosity, and total drops per vial were determined for Travatan (Alcon, Fort Worth, TX, USA) and all the generic formulations. Travoprost concentration in all four brands was estimated by using liquid chromatography-coupled tandem mass spectrometry LCMS. Results: Out of the four formulations, two drugs (TP 1 and TP 4) were found to follow the United States Pharmacopoeia (USP) limits for ophthalmic formulation regarding drug concentration, while the remaining two drugs failed due to the limits being either above 110% (TP 2) or below 90% (TP 3). Two of them (TP 1 and TP 2) had osmolality of 313 and 262 mOsm respectively, which did not comply with the osmolality limits within 300 mOsm (+ 10%). The pH of all the formulations ranged between 4.7 and 5.9, and the mean drop size was 30.23 ± 6.03 uL. The total amount of drug volume in the bottles varied from 2.58 ± 0.15 to 3.38 ± 0.06 mL/bottle. Conclusion: There are wide variations in the physical properties of generic formulations available in India. Although some generic drugs are compliant with the pharmacopeia standards, this study underscores the need for a better quality control in the production of generic travoprost formulations. How to cite this article: Wadhwani M, Mishra SK, Angmo D, Velpandian T, Sihota R, Kotnala A, Bhartiya S, Dada T. Evaluation of Physical Properties of Generic and Branded Travoprost Formulations. J Curr Glaucoma Pract. 2016;10(2):49-55. PMID:27536047

  16. Actor-critic models of the basal ganglia: new anatomical and computational perspectives.

    Science.gov (United States)

    Joel, Daphna; Niv, Yael; Ruppin, Eytan

    2002-01-01

    A large number of computational models of information processing in the basal ganglia have been developed in recent years. Prominent in these are actor-critic models of basal ganglia functioning, which build on the strong resemblance between dopamine neuron activity and the temporal difference prediction error signal in the critic, and between dopamine-dependent long-term synaptic plasticity in the striatum and learning guided by a prediction error signal in the actor. We selectively review several actor-critic models of the basal ganglia with an emphasis on two important aspects: the way in which models of the critic reproduce the temporal dynamics of dopamine firing, and the extent to which models of the actor take into account known basal ganglia anatomy and physiology. To complement the efforts to relate basal ganglia mechanisms to reinforcement learning (RL), we introduce an alternative approach to modeling a critic network, which uses Evolutionary Computation techniques to 'evolve' an optimal RL mechanism, and relate the evolved mechanism to the basic model of the critic. We conclude our discussion of models of the critic by a critical discussion of the anatomical plausibility of implementations of a critic in basal ganglia circuitry, and conclude that such implementations build on assumptions that are inconsistent with the known anatomy of the basal ganglia. We return to the actor component of the actor-critic model, which is usually modeled at the striatal level with very little detail. We describe an alternative model of the basal ganglia which takes into account several important, and previously neglected, anatomical and physiological characteristics of basal ganglia-thalamocortical connectivity and suggests that the basal ganglia performs reinforcement-biased dimensionality reduction of cortical inputs. We further suggest that since such selective encoding may bias the representation at the level of the frontal cortex towards the selection of rewarded

  17. Symmetries of a generic utricular projection: neural connectivity and the distribution of utricular information.

    Science.gov (United States)

    Chartrand, Thomas; McCollum, Gin; Hanes, Douglas A; Boyle, Richard D

    2016-02-01

    Sensory contribution to perception and action depends on both sensory receptors and the organization of pathways (or projections) reaching the central nervous system. Unlike the semicircular canals that are divided into three discrete sensitivity directions, the utricle has a relatively complicated anatomical structure, including sensitivity directions over essentially 360° of a curved, two-dimensional disk. The utricle is not flat, and we do not assume it to be. Directional sensitivity of individual utricular afferents decreases in a cosine-like fashion from peak excitation for movement in one direction to a null or near null response for a movement in an orthogonal direction. Directional sensitivity varies slowly between neighboring cells except within the striolar region that separates the medial from the lateral zone, where the directional selectivity abruptly reverses along the reversal line. Utricular primary afferent pathways reach the vestibular nuclei and cerebellum and, in many cases, converge on target cells with semicircular canal primary afferents and afference from other sources. Mathematically, some canal pathways are known to be characterized by symmetry groups related to physical space. These groups structure rotational information and movement. They divide the target neural center into distinct populations according to the innervation patterns they receive. Like canal pathways, utricular pathways combine symmetries from the utricle with those from target neural centers. This study presents a generic set of transformations drawn from the known structure of the utricle and therefore likely to be found in utricular pathways, but not exhaustive of utricular pathway symmetries. This generic set of transformations forms a 32-element group that is a semi-direct product of two simple abelian groups. Subgroups of the group include order-four elements corresponding to discrete rotations. Evaluation of subgroups allows us to functionally identify the

  18. Assessment of industrial attitudes toward generic research needs in tribology

    Energy Technology Data Exchange (ETDEWEB)

    Sibley, L.B.; Zlotnick, M.; Levinson, T.M.

    1985-09-01

    Based on extended discussions during visits with 27 companies representing 13 different parts of the tribology industry (such as bearings, lubricants, coatings, powerplants), it is apparent that only a tiny fraction of the large sums publicly reported as R and D expenditures by industry are used to fund generic tribology research. For example, of the greater than $2 B expenditures reported for R and D in the lubricants sector for 1982, the estimated total for generic tribology research was $12 M. This was the largest expenditure in any sector of the tribology industry and one-third of the total of $36 M. In the automotive industry out of a reported expenditure of $4 B, the estimated generic tribology research was $3 M. In some segments of the tribology industry, for example coatings and filters, there were no expenditures on generic research. There was little tendency to improve the state of the art of the tribology industry through long-term investment in generic R and D in ways that would foster innovation and productivity of energy conservation technology. Expenditures were oriented to development of specific commercial and military products, or to basic research focused on unspecified far term results, although useful spin-off of military developments into commercial fields sometimes occurs. There was a broad consensus in the companies visited that existing research results were not always made easily accessible to potential users in industry. The implication was that industry might benefit more if a larger fraction of the funds were devoted to putting the research results into a form design and development engineers could more readily apply. The need for a more effective presentation of research results was expressed with greater urgency at the smaller companies, but there seemed to be a broad consensus on the need for improvement. Recommendations are given.

  19. Benefits Assessment of Algorithmically Combining Generic High Altitude Airspace Sectors

    Science.gov (United States)

    Bloem, Michael; Gupta, Pramod; Lai, Chok Fung; Kopardekar, Parimal

    2009-01-01

    In today's air traffic control operations, sectors that have traffic demand below capacity are combined so that fewer controller teams are required to manage air traffic. Controllers in current operations are certified to control a group of six to eight sectors, known as an area of specialization. Sector combinations are restricted to occur within areas of specialization. Since there are few sector combination possibilities in each area of specialization, human supervisors can effectively make sector combination decisions. In the future, automation and procedures will allow any appropriately trained controller to control any of a large set of generic sectors. The primary benefit of this will be increased controller staffing flexibility. Generic sectors will also allow more options for combining sectors, making sector combination decisions difficult for human supervisors. A sector-combining algorithm can assist supervisors as they make generic sector combination decisions. A heuristic algorithm for combining under-utilized air space sectors to conserve air traffic control resources has been described and analyzed. Analysis of the algorithm and comparisons with operational sector combinations indicate that this algorithm could more efficiently utilize air traffic control resources than current sector combinations. This paper investigates the benefits of using the sector-combining algorithm proposed in previous research to combine high altitude generic airspace sectors. Simulations are conducted in which all the high altitude sectors in a center are allowed to combine, as will be possible in generic high altitude airspace. Furthermore, the algorithm is adjusted to use a version of the simplified dynamic density (SDD) workload metric that has been modified to account for workload reductions due to automatic handoffs and Automatic Dependent Surveillance Broadcast (ADS-B). This modified metric is referred to here as future simplified dynamic density (FSDD). Finally

  20. Anatomical, Clinical and Electrical Observations in Piriformis Syndrome

    Directory of Open Access Journals (Sweden)

    Assoum Hani A

    2010-01-01

    Full Text Available Abstract Background We provided clinical and electrical descriptions of the piriformis syndrome, contributing to better understanding of the pathogenesis and further diagnostic criteria. Methods Between 3550 patients complaining of sciatica, we concluded 26 cases of piriformis syndrome, 15 females, 11 males, mean age 35.37 year-old. We operated 9 patients, 2 to 19 years after the onset of symptoms, 5 had piriformis steroids injection. A dorsolumbar MRI were performed in all cases and a pelvic MRI in 7 patients. The electro-diagnostic test was performed in 13 cases, between them the H reflex of the peroneal nerve was tested 7 times. Results After a followup 1 to 11 years, for the 17 non operated patients, 3 patients responded to conservative treatment. 6 of the operated had an excellent result, 2 residual minor pain and one failed. 3 new anatomical observations were described with atypical compression of the sciatic nerve by the piriformis muscle. Conclusion While the H reflex test of the tibial nerve did not give common satisfaction in the literature for diagnosis, the H reflex of the peroneal nerve should be given more importance, because it demonstrated in our study more specific sign, with six clinical criteria it contributed to improve the method of diagnosis. The cause of this particular syndrome does not only depend on the relation sciatic nerve-piriformis muscle, but the environmental conditions should be considered with the series of the anatomical anomalies to explain the real cause of this pain.