WorldWideScience

Sample records for broodstock technologies annual

  1. Research on Captive Broodstock Programs for Pacific Salmon; Assessment of Captive Broodstock Technologies, Annual Report 2002-2003.

    Energy Technology Data Exchange (ETDEWEB)

    Berejikian, Barry

    2004-01-01

    The success of captive broodstock programs depends on high in-culture survival, appropriate development of the reproductive system, and the behavior and survival of cultured salmon after release, either as adults or juveniles. Continuing captive broodstock research designed to improve technology is being conducted to cover all major life history stages of Pacific salmon. Current velocity in rearing vessels had little if any effect on reproductive behavior of captively reared steelhead. However, males and females reared in high velocity vessels participated a greater number of spawning events than siblings reared in low velocity tanks. Observations of nesting females and associated males in a natural stream (Hamma Hamma River) were consistent with those observed in a controlled spawning channel. DNA pedigree analyses did not reveal significant differences in the numbers of fry produced by steelhead reared in high and low velocity vessels. To determine the critical period(s) for imprinting for sockeye salmon, juvenile salmon are being exposed to known odorants at key developmental stages. Subsequently they will be tested for development of long-term memories of these odorants. In 2002-2003, the efficacy of EOG analysis for assessing imprinting was demonstrated and will be applied in these and other behavioral and molecular tools in the current work plan. Results of these experiments will be important to determine the critical periods for imprinting for the offspring of captively-reared fish destined for release into natal rivers or lakes. By early August, the oocytes of all of Rapid River Hatchery chinook salmon females returning from the ocean had advanced to the tertiary yolk globule stage; whereas, only some of the captively reared Lemhi River females sampled had advanced to this stage, and the degree of advancement was not dependent on rearing temperature. The mean spawning time of captive Lemhi River females was 3-4 weeks after that of the Rapid River fish

  2. Research on Captive Broodstock Technology for Pacific Salmon, 1995 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Swanson, Penny; Pascho, Ronald; Hershberger, William K. (Northwest and Alaska Fisheries Center, Coastal Zone and Estuarine Studies Division, Seattle, WA)

    1996-01-01

    This report summarizes research on captive broodstock technologies conducted during 1995 under Bonneville Power Administration Project 93-56. Investigations were conducted by the National Marine Fisheries Service (NMFS) in cooperation with the US Fish and Wildlife Service, University of Washington, and Northwest Biological Science Center (US Geological Survey). Studies encompassed several categories of research, including fish husbandry, reproductive physiology, immunology, pathology, nutrition, and genetics. Captive broodstock programs are being developed and implemented to aid recovery of endangered Pacific salmon stocks. Like salmon hatchery programs, however, captive broodstock programs are not without problems and risks to natural salmon populations. The research projects described in this report were developed in part based on a literature review, Assessment of the Status of Captive Broodstock Technology for Pacific Salmon. The work was divided into three major research areas: (1) research on sockeye salmon; (2) research on spring chinook salmon; and (3) research on quantitative genetic problems associated with captive broodstock programs. Investigations of nutrition, reproductive physiology, fish husbandry, and fish health were integrated into the research on sockeye and spring chinook salmon. A description of each investigation and its major findings and conclusions is presented.

  3. Snake River Sockeye Salmon Captive Broodstock Program; Hatchery Element, 1997 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Kline, Paul A.; Heindel, Jeff A.; Willard, Catherine (Idaho Department of Fish and Game, Boise, ID)

    2003-08-01

    On November 20, 1991, the National Marine Fisheries Service listed Snake River sockeye salmon Oncorhynchus nerka as endangered under the Endangered Species Act of 1973. In 1991, the Idaho Department of Fish and Game, the Shoshone-Bannock Tribes, and the National Marine Fisheries Service initiated efforts to conserve and rebuild populations in Idaho. Initial steps to recover sockeye salmon included the establishment of a captive broodstock program at the Idaho Department of Fish and Game Eagle Fish Hatchery. Sockeye salmon broodstock and culture responsibilities are shared with the National Marine Fisheries Service at two locations adjacent to Puget Sound in Washington State. Activities conducted by the Shoshone-Bannock Tribes and the National Marine Fisheries Service are reported under separate cover. Idaho Department of Fish and Game monitoring and evaluation activities of captive broodstock program fish releases (annual report to the Bonneville Power Administration for the research element of the program) are also reported under separate cover. Captive broodstock program activities conducted between January 1, 1997 and December 31, 1997 are presented in this report. One hundred twenty-six female sockeye salmon from one captive broodstock group were spawned at the Eagle Fish Hatchery in 1997. Successful spawn pairings produced approximately 148,781 eyed-eggs with a cumulative mean survival to eyed-egg rate of 57.3%. Approximately 361,600 sockeye salmon were released to Sawtooth basin waters in 1997. Reintroduction strategies included eyed-eggs (brood year 1997), presmolts (brood year 1996), and prespawn adults for volitional spawning (brood year 1994). Release locations included Redfish Lake, Alturas Lake, and Pettit Lake. During this reporting period, four broodstocks and two unique production groups were in culture at the Eagle Fish Hatchery. Two of the four broodstocks were incorporated into the 1997 spawning design, and one broodstock was terminated following

  4. Snake River Sockeye Salmon Captive Broodstock Program; Hatchery Element, 2001 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Kline, Paul A.; Willard, Catherine; Baker, Dan J. (Idaho Department of Fish and Game, Boise, ID)

    2003-08-01

    On November 20, 1991, the National Marine Fisheries Service listed Snake River sockeye salmon Oncorhynchus nerka as endangered under the Endangered Species Act of 1973. In 1991, the Idaho Department of Fish and Game, the Shoshone-Bannock Tribes, and the National Marine Fisheries Service initiated efforts to conserve and rebuild populations in Idaho. Initial steps to recover sockeye salmon included the establishment of a captive broodstock program at the Idaho Department of Fish and Game Eagle Fish Hatchery. Sockeye salmon broodstock and culture responsibilities are shared with the National Marine Fisheries Service at two locations adjacent to Puget Sound in Washington State. Activities conducted by the Shoshone-Bannock Tribes and the National Marine Fisheries Service are reported under separate cover. Idaho Department of Fish and Game monitoring and evaluation activities of captive broodstock program fish releases (annual report to the Bonneville Power Administration for the research element of the program) are also reported separately. Captive broodstock program activities conducted between January 1, 2001 and December 31, 2001 for the hatchery element of the program are presented in this report. In 2001, 26 anadromous sockeye salmon returned to the Sawtooth Basin. Twenty-three of these adults were captured at adult weirs located on the upper Salmon River and on Redfish Lake Creek. Three of the anadromous sockeye salmon that returned were observed below the Sawtooth Fish Hatchery weir and allowed to migrate upstream volitionally (following the dismantling of the weir on October 12, 2001). Nine anadromous adults were incorporated into the captive broodstock program spawning design in 2001. The remaining adults were released to Redfish Lake for natural spawning. Based on their marks, returning adult sockeye salmon originated from a variety of release options. Two sockeye salmon females from the anadromous group and 152 females from the brood year 1998 captive

  5. Snake River Sockeye Salmon Captive Broodstock Program; Research Element, 2002 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Willard, Catherine; Hebdon, J. Lance; Castillo, Jason (Idaho Department of Fish and Game, Boise, ID)

    2004-06-01

    . The immediate project goal is to maintain this unique sockeye salmon population through captive broodstock technology and avoid species extinction. The project objectives are: (1) Develop captive broodstocks from Redfish Lake anadromous sockeye salmon. (2) Determine the contribution hatchery-produced sockeye salmon make toward avoiding population extinction and increasing population abundance. (3) Describe O. nerka population characteristics for Sawtooth Valley lakes in relation to carrying capacity and broodstock program supplementation efforts. (4) Refine our ability to discern the origin of wild and broodstock sockeye salmon to provide maximum effectiveness in their utilization within the broodstock program. (5) Transfer technology through participation in the technical oversight committee process, providing written activity reports and participation in essential program management and planning activities.

  6. Snake River Sockeye Salmon Captive Broodstock Program; Hatchery Element, 2002 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Willard, Catherine; Baker, Dan J.; Heindel, Jeff A. (Idaho Department of Fish and Game, Boise, ID)

    2003-12-01

    On November 20, 1991, the National Marine Fisheries Service listed Snake River sockeye salmon Oncorhynchus nerka as endangered under the Endangered Species Act of 1973. In 1991, the Idaho Department of Fish and Game, the Shoshone-Bannock Tribes, and the National Marine Fisheries Service initiated efforts to conserve and rebuild populations in Idaho. Initial steps to recover sockeye salmon included the establishment of a captive broodstock program at the Idaho Department of Fish and Game Eagle Fish Hatchery. Sockeye salmon broodstock and culture responsibilities are shared with the National Oceanic and Atmospheric Administration at two locations adjacent to Puget Sound in Washington State. Activities conducted by the Shoshone-Bannock Tribes and the National Oceanic and Atmospheric Administration are reported under separate cover. Idaho Department of Fish and Game monitoring and evaluation activities of captive broodstock program fish releases (annual report to the Bonneville Power Administration for the research element of the program) are also reported separately. Captive broodstock program activities conducted between January 1, 2002 and December 31, 2002 for the hatchery element of the program are presented in this report. n 2002, 22 anadromous sockeye salmon returned to the Sawtooth Valley. Fifteen of these adults were captured at adult weirs located on the upper Salmon River and on Redfish Lake Creek. Seven of the anadromous sockeye salmon that returned were observed below the Sawtooth Fish Hatchery weir and allowed to migrate upstream volitionally (following the dismantling of the weir on September 30, 2002). All adult returns were released to Redfish Lake for natural spawning. Based on their marks, returning adult sockeye salmon originated from a variety of release options. Sixty-six females from brood year 1999 and 28 females from brood year 2000 captive broodstock groups were spawned at the Eagle Hatchery in 2002. Spawn pairings produced approximately 65

  7. Snake River Sockeye Salmon Captive Broodstock Program Hatchery Element : Project Progress Report 2007 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Baker, Dan J.; Heindel, Jeff A.; Green, Daniel G.; Kline, Paul A.

    2008-12-17

    Johnson 1997; Pravecek and Kline 1998; Kline and Heindel 1999; Hebdon et al. 2000; Flagg et al. 2001; Kline and Willard 2001; Frost et al. 2002; Hebdon et al. 2002; Hebdon et al. 2003; Kline et al. 2003a; Kline et al. 2003b; Willard et al. 2003a; Willard et al. 2003b; Baker et al. 2004; Baker et al. 2005; Willard et al. 2005; Baker et al. 2006; Plaster et al. 2006; Baker et al. 2007). The immediate goal of the program is to utilize captive broodstock technology to conserve the population's unique genetics. Long-term goals include increasing the number of individuals in the population to address delisting criteria and to provide sport and treaty harvest opportunity. (1) Develop captive broodstocks from Redfish Lake sockeye salmon, culture broodstocks and produce progeny for reintroduction. (2) Determine the contribution hatchery-produced sockeye salmon make toward avoiding population extinction and increasing population abundance. (3) Describe O. nerka population characteristics for Sawtooth Valley lakes in relation to carrying capacity and broodstock program reintroduction efforts. (4) Utilize genetic analysis to discern the origin of wild and broodstock sockeye salmon to provide maximum effectiveness in their utilization within the broodstock program. (5) Transfer technology through participation in the technical oversight committee process, provide written activity reports, and participate in essential program management and planning activities. Idaho Department of Fish and Game's participation in the Snake River Sockeye Salmon Captive Broodstock Program includes two areas of effort: (1) sockeye salmon captive broodstock culture, and (2) sockeye salmon research and evaluations. Although objectives and tasks from both components overlap and contribute to achieving the same goals, work directly related to sockeye salmon captive broodstock research and enhancement will appear under a separate cover. Research and enhancement activities associated with Snake River

  8. Snake River Sockeye Salmon Captive Broodstock Program Hatchery Element : Project Progress Report 2007 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Baker, Dan J.; Heindel, Jeff A.; Green, Daniel G.; Kline, Paul A.

    2008-12-17

    Johnson 1997; Pravecek and Kline 1998; Kline and Heindel 1999; Hebdon et al. 2000; Flagg et al. 2001; Kline and Willard 2001; Frost et al. 2002; Hebdon et al. 2002; Hebdon et al. 2003; Kline et al. 2003a; Kline et al. 2003b; Willard et al. 2003a; Willard et al. 2003b; Baker et al. 2004; Baker et al. 2005; Willard et al. 2005; Baker et al. 2006; Plaster et al. 2006; Baker et al. 2007). The immediate goal of the program is to utilize captive broodstock technology to conserve the population's unique genetics. Long-term goals include increasing the number of individuals in the population to address delisting criteria and to provide sport and treaty harvest opportunity. (1) Develop captive broodstocks from Redfish Lake sockeye salmon, culture broodstocks and produce progeny for reintroduction. (2) Determine the contribution hatchery-produced sockeye salmon make toward avoiding population extinction and increasing population abundance. (3) Describe O. nerka population characteristics for Sawtooth Valley lakes in relation to carrying capacity and broodstock program reintroduction efforts. (4) Utilize genetic analysis to discern the origin of wild and broodstock sockeye salmon to provide maximum effectiveness in their utilization within the broodstock program. (5) Transfer technology through participation in the technical oversight committee process, provide written activity reports, and participate in essential program management and planning activities. Idaho Department of Fish and Game's participation in the Snake River Sockeye Salmon Captive Broodstock Program includes two areas of effort: (1) sockeye salmon captive broodstock culture, and (2) sockeye salmon research and evaluations. Although objectives and tasks from both components overlap and contribute to achieving the same goals, work directly related to sockeye salmon captive broodstock research and enhancement will appear under a separate cover. Research and enhancement activities associated with Snake River

  9. Tucannon River Spring Chinook Salmon Captive Broodstock Program, Annual Report 2001.

    Energy Technology Data Exchange (ETDEWEB)

    Gallinat, Michael P.; Bumgarner, Joseph D.

    2002-05-01

    This report summarizes the objectives, tasks, and accomplishments of the Tucannon River spring chinook captive brood during 2001. The WDFW initiated a captive broodstock program in 1997. The overall goal of the Tucannon River captive broodstock program is for the short-term, and eventually long-term, rebuilding of the Tucannon River spring chinook salmon run, with the hope that natural production will sustain itself. The project goal is to rear captive salmon selected from the supplementation program to adults, spawn them, rear their progeny, and release approximately 150,000 smolts annually into the Tucannon River between 2003-2007. These smolt releases, in combination with the current hatchery supplementation program (132,000 smolts) and wild production, are expected to produce 600-700 returning adult spring chinook to the Tucannon River each year from 2005-2010. The captive broodstock program will collect fish from five (1997-2001) brood years (BY). The captive broodstock program was initiated with 1997 BY juveniles, and the 2001 BY fish have been selected. As of Jan 1, 2002, WDFW has 17 BY 1997, 159 BY 1998, 316 BY 1999, 448 BY 2000, and approximately 1,200 BY 2001 fish on hand at LFH. The 2001 eggtake from the 1997 brood year (Age 4) was 233,894 eggs from 125 ripe females. Egg survival was 69%. Mean fecundity based on the 105 fully spawned females was 1,990 eggs/female. The 2001 eggtake from the 1998 brood year (Age 3) was 47,409 eggs from 41 ripe females. Egg survival was 81%. Mean fecundity based on the 39 fully spawned females was 1,160 eggs/female. The total 2001 eggtake from the captive brood program was 281,303 eggs. As of May 1, 2002 we have 171,495 BY 2001 captive brood progeny on hand. A total of 20,592 excess fish were marked as parr (AD/CWT) and will be released during early May, 2002 into the Tucannon River (rkm 40-45). This will allow us to stay within our maximum allowed number (150,000) of smolts released. During April 2002, WDFW volitionally

  10. Research on Captive Broodstock Programs for Pacific Salmon, 2004-2005 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Berejikian, Barry A. (National Marine Fisheries Service)

    2005-11-01

    The success of captive broodstock programs depends on high in-culture survival, appropriate development of the reproductive system, and the behavior and survival of cultured salmon after release, either as adults or juveniles. Continuing captive broodstock research designed to improve technology is being conducted to cover all major life history stages of Pacific salmon. Accomplishments detailed in this report and those since the last project review period (FY 2003) are listed below by major objective. Objective 1: (i) Developed tools for monitoring the spawning success of captively reared Chinook salmon that can now be used for evaluating the reintroduction success of ESA-listed captive broodstocks in their natal habitats. (ii) Developed an automated temperature controlled rearing system to test the effects of seawater rearing temperature on reproductive success of Chinook salmon. Objective 2: (i) Determined that Columbia River sockeye salmon imprint at multiple developmental stages and the length of exposure to home water is important for successful imprinting. These results can be utilized for developing successful reintroduction strategies to minimize straying by ESA-listed sockeye salmon. (ii) Developed behavioral and physiological assays for imprinting in sockeye salmon. Objective 3: (i) Developed growth regime to reduce age-two male maturation in spring Chinook salmon, (ii) described reproductive cycle of returning hatchery Snake River spring Chinook salmon relative to captive broodstock, and (iii) found delays in egg development in captive broodstock prior to entry to fresh water. (iv) Determined that loss of Redfish Lake sockeye embryos prior to hatch is largely due to lack of egg fertilization rather than embryonic mortality. Objective 4 : (i) Demonstrated safety and efficacy limits against bacterial kidney disease (BKD) in fall Chinook of attenuated R. salmoninarum vaccine and commercial vaccine Renogen, (ii) improved prophylactic and therapeutic

  11. Tucannon River Spring Chinook Salmon Captive Broodstock Program, Annual Report 2002.

    Energy Technology Data Exchange (ETDEWEB)

    Gallinat, Michael; Varney, Michelle

    2003-05-01

    This report summarizes the objectives, tasks, and accomplishments of the Tucannon River Spring Chinook Captive Broodstock Program during 2002. The WDFW initiated a captive broodstock program in 1997. The overall goal of the Tucannon River captive broodstock program is for the short-term, and eventually long-term, rebuilding of the Tucannon River spring chinook salmon run, with the hope that natural production will sustain itself. The project goal is to rear captive salmon selected from the supplementation program to adults, spawn them, rear their progeny, and release approximately 150,000 smolts annually into the Tucannon River between 2003-2007. These smolt releases, in combination with the current hatchery supplementation program (132,000 smolts) and wild production, are expected to produce 600-700 returning adult spring chinook to the Tucannon River each year from 2005-2010. The captive broodstock program collected fish from five (1997-2001) brood years (BY). As of January 1, 2003, WDFW has approximately 11 BY 1998, 194 BY 1999, 314 BY 2000, 447 BY 2001, and 300 BY 2002 (for extra males) fish on hand at LFH. The 2002 eggtake from the 1997 brood year (Age 5) was 13,176 eggs from 10 ripe females. Egg survival was 22%. Mean fecundity based on the 5 fully spawned females was 1,803 eggs/female. The 2002 eggtake from the 1998 brood year (Age 4) was 143,709 eggs from 93 ripe females. Egg survival was 29%. Mean fecundity based on the 81 fully spawned females was 1,650 eggs/female. The 2002 eggtake from the 1999 brood year (Age 3) was 19,659 eggs from 18 ripe females. Egg survival was 55%. Mean fecundity based on the 18 fully spawned fish was 1,092 eggs/female. The total 2002 eggtake from the captive brood program was 176,544 eggs. A total of 120,833 dead eggs (68%) were removed with 55,711 live eggs remaining for the program. As of May 1, 2003 we had 46,417 BY 2002 captive brood progeny on hand A total of 20,592 excess BY 01 fish were marked as parr (AD/CWT) and

  12. Snake River Sockeye Salmon Captive Broodstock Program; Hatchery Element, 2004 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Baker, Dan J.; Heindel, Jeff A.; Redding, Jeremy (Idaho Department of Fish and Game, Boise, ID)

    2006-05-01

    On November 20, 1991, the National Marine Fisheries Service listed Snake River sockeye salmon Oncorhynchus nerka as endangered under the Endangered Species Act of 1973. In 1991, the Idaho Department of Fish and Game, the Shoshone-Bannock Tribes, and the National Marine Fisheries Service initiated efforts to conserve and rebuild populations in Idaho. Initial steps to recover sockeye salmon included the establishment of a captive broodstock program at the Idaho Department of Fish and Game Eagle Fish Hatchery. Sockeye salmon broodstock and culture responsibilities are shared with the National Oceanic and Atmospheric Administration at two locations adjacent to Puget Sound in Washington State. Activities conducted by the Shoshone-Bannock Tribes and the National Oceanic and Atmospheric Administration are reported under separate cover. Idaho Department of Fish and Game monitoring and evaluation activities of captive broodstock program fish releases (annual report to the Bonneville Power Administration for the research element of the program) are also reported separately. Captive broodstock program activities conducted between January 1, 2004 and December 31, 2004 for the hatchery element of the program are presented in this report. In 2004, twenty-seven anadromous sockeye salmon returned to the Sawtooth Valley. Traps on Redfish Lake Creek and the upper Salmon River at the Sawtooth Fish Hatchery intercepted one and four adults, respectively. Additionally, one adult sockeye salmon was collected at the East Fork Salmon River weir, 18 were seined from below the Sawtooth Fish Hatchery weir, one adult sockeye salmon was observed below the Sawtooth Fish Hatchery weir but not captured, and two adult sockeye salmon were observed in Little Redfish Lake but not captured. Fish were captured/collected between July 24 and September 14, 2004. The captured/collected adult sockeye salmon (12 females and 12 males) originated from a variety of release strategies and were transferred to

  13. Research on Captive Broodstock Programs for Pacific Salmon, 2003-2004 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Berejikian, Barry A.; Athos, Jaime I.; Dittman, Andrew H. (National Marine Fisheries Service)

    2004-07-01

    The success of captive broodstock programs depends on high in-culture survival, appropriate development of the reproductive system, and the behavior and survival of cultured salmon after release, either as adults or juveniles. Continuing captive broodstock research designed to improve technology is being conducted to cover all major life history stages of Pacific salmon. We were able to develop an analytical method for optimizing the detection of spawning events in Chinook salmon using EMG signals. The method developed essentially captured the consistently greater frequency of higher EMG values associated with females cover digging immediately following spawning. However, females implanted with EMG tags retained the majority of their eggs, which significantly reduced their reproductive success compared to non-tagged females. Future work will include increased sample sizes, and modified tagging methods to reduce negative effects on reproductive success. Upper Columbia River sockeye salmon exposed to the odorants PEA, L-threonine, Larginine and L-glutamate were able to learn and remember these odorants as maturing adults up to 2.5 years after exposure. These results suggest that the alevin and smolt stages are both important developmental periods for successful olfactory imprinting. Furthermore, the period of time that fish are exposed to imprinting odors may be important for successful imprinting. Experimental fish exposed to imprinting odors as smolts for six or one weeks successfully imprinted to these odors but imprinting could not be demonstrated in smolts exposed to odors for only one day. A 2-3 C reduction in seawater rearing temperature during the fall and winter prior to final maturation had little effect on reproductive development of spring Chinook salmon. Body size at spawning and total ovary mass were similar between temperature treatments. The percentage of fertilized eggs was significantly higher for females exposed to the ambient temperature compared

  14. An Assessment of the Status of Captive Broodstock Technology of Pacific Salmon, 1995 Final Report.

    Energy Technology Data Exchange (ETDEWEB)

    Flagg, Thomas A.; Mahnaken, Conrad V.W.; Hard, Jeffrey J.

    1995-06-01

    This report provides guidance for the refinement and use of captive broodstock technology for Pacific salmon (Oncorhynchus spp.) by bringing together information on the husbandry techniques, genetic risks, physiology, nutrition, and pathology affecting captive broodstocks. Captive broodstock rearing of Pacific salmon is an evolving technology, as yet without well defined standards. At present, we regard captive rearing of Pacific salmon as problematic: high mortality rates and low egg viability were common in the programs we reviewed for this report. One of the most important elements in fish husbandry is the culture environment itself. Many captive broodstock programs for Pacific salmon have reared fish from smolt-to-adult in seawater net-pens, and most have shown success in providing gametes for recovery efforts. However, some programs have lost entire brood years to diseases that transmitted rapidly in this medium. Current programs for endangered species of Pacific salmon rear most fish full-term to maturity in fresh well-water, since ground water is low in pathogens and thus helps ensure survival to adulthood. Our review suggested that captive rearing of fish in either freshwater, well-water, or filtered and sterilized seawater supplied to land-based tanks should produce higher survival than culture in seawater net-pens.

  15. Research on Captive Broodstock Programs for Pacific Salmon, 2001-2002 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Berejikian, Barry; Tezak, E.; Endicott, Rick

    2002-08-01

    The efficacy of captive broodstock programs depends on high in-culture survival and the fitness of cultured salmon after release, either as adults or juveniles. Continuing captive broodstock research designed to improve technology is being conducted to cover all major life history stages of Pacific salmon. The following summarizes some of the work performed and results from the FY 2001 performance period: (1) The incidence of male maturation of age-1 chinook salmon was significantly reduced by reducing growth in the first year of rearing. (2) Experimentally manipulated growth rates of captively-reared coho salmon had significant effects on female maturation rate, egg size, and fecundity, and the effects were stage-specific (i.e., pre-smolt vs. post-smolt). (3) A combination of Renogen and MT239 vaccination of yearling chinook salmon given an acute R. salmoninarum challenge had a significantly longer survival time than the mock-vaccinated group. The survival time was marginally higher than was seen in acutely challenged fish vaccinated with either Renogen or MT239 alone and suggests that a combination vaccine of Renogen and MT239 may be useful as both a prophylactic and therapeutic agent against BKD. (4) Full-sib (inbred) groups of chinook salmon have thus far exhibited lower ocean survival than half-sib and non-related groups. Effects of inbreeding on fluctuating asymmetry did not follow expected patterns. (5) Sockeye salmon were exposed to specific odorants at either the alevin/emergent fry stage or the smolt stage to determine the relative importance of odorant exposure during key developmental periods and the importance of exposure duration. (6) Experimental studies to determine the effects of exercise conditioning on steelhead reproductive behavior and the effects of male body size on chinook salmon fertilization success during natural spawning were completed.

  16. Grande Ronde Basin Spring Chinook Salmon Captive Broodstock Program, 2008 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Hoffnagle, Timothy L.; Hair, Donald; Gee, Sally

    2009-03-31

    wherever possible. We continue to have difficulty with prevention and treatment of BKD outbreaks and continue to use erythromycin and azithromycin to treat this disease. We are also continuing to investigate other possible treatments and prophylactic measures. To reduce the incidence of BKD in offspring of the Captive Broodstock Program, we continue to allow culling of eyed eggs from females with high BKD ELISA values (generally >0.800 OD units but the cull level varies annually, depending on the distribution of ELISA values, number of eggs collected, and management considerations). We are also using ultrasound to determine maturity and sex of fish early in the maturation process and are now able to determine maturity and sex of most maturing fish in early April. This allows us to transfer maturing fish from saltwater to freshwater at a more natural time, which should improve fecundity and egg quality of saltwater-reared fish.

  17. Research on Captive Broodstock Programs for Pacific Salmon, 2002-2003 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Berejikian, Barry A. (National Marine Fisheries Service)

    2004-01-01

    The success of captive broodstock programs depends on high in-culture survival, appropriate development of the reproductive system, and the behavior and survival of cultured salmon after release, either as adults or juveniles. Continuing captive broodstock research designed to improve technology is being conducted to cover all major life history stages of Pacific salmon. Current velocity in rearing vessels had little if any effect on reproductive behavior of captively reared steelhead. However, males and females reared in high velocity vessels participated a greater number of spawning events than siblings reared in low velocity tanks. Observations of nesting females and associated males in a natural stream (Hamma Hamma River) were consistent with those observed in a controlled spawning channel. DNA pedigree analyses did not reveal significant differences in the numbers of fry produced by steelhead reared in high and low velocity vessels. To determine the critical period(s) for imprinting for sockeye salmon, juvenile salmon are being exposed to known odorants at key developmental stages. Subsequently they will be tested for development of long-term memories of these odorants. In 2002-2003, the efficacy of EOG analysis for assessing imprinting was demonstrated and will be applied in these and other behavioral and molecular tools in the current work plan. Results of these experiments will be important to determine the critical periods for imprinting for the offspring of captively-reared fish destined for release into natal rivers or lakes. By early August, the oocytes of all of Rapid River Hatchery chinook salmon females returning from the ocean had advanced to the tertiary yolk globule stage; whereas, only some of the captively reared Lemhi River females sampled had advanced to this stage, and the degree of advancement was not dependent on rearing temperature. The mean spawning time of captive Lemhi River females was 3-4 weeks after that of the Rapid River fish

  18. Redfish Lake Sockeye Salmon Captive Broodstock Rearing and Research, 1994 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Flagg, Thomas A.

    1996-03-01

    The National Marine Fisheries Service (NMFS) Northwest Fisheries Science Center, in cooperation with the Idaho Department of Fish and Game (IDFG) and the Bonneville Power Administration, has established captive broodstocks to aid recovery of Snake River sockeye salmon (Oncorhynchus nerka) listed as endangered under the US Endangered Species Act (ESA). Captive broodstock programs are emerging as an important component of restoration efforts for ESA-listed salmon populations. Captive broodstock programs are a form of artificial propagation. However, they differ from standard hatchery techniques in one important respect: fish are cultured in captivity for the entire life cycle. The high fecundity of Pacific salmon, coupled with their potentially high survival in protective culture, affords an opportunity for captive broodstocks to produce large numbers of juveniles in a single generation for supplementation of natural populations. The captive broodstocks discussed in this report were intended to protect the last known remnants of this stock: sockeye salmon that return to Redfish Lake in the Sawtooth Basin of Idaho at the headwaters of the Salmon River. This report addresses NMFS research from January to December 1994 on the Redfish Lake sockeye salmon captive broodstock program and summarizes results since the beginning of the study in 1991. Spawn from NMFS Redfish Lake sockeye salmon captive broodstocks is being returned to Idaho to aid recovery efforts for the species.

  19. Redfish Lake Sockeye Salmon Captive Broodstock Rearing and Research, 2001 : Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Frost, Deborah A.; McAuley, W. Carlin; Maynard, Desmond J.

    2002-04-01

    The National Marine Fisheries Service (NMFS) Northwest Fisheries Science Center, in cooperation with the Idaho Department of Fish and Game and the Bonneville Power Administration, has established captive broodstock and captive rearing programs to aid recovery of Snake River sockeye salmon (Oncorhynchus nerka) listed as endangered under the U.S. Endangered Species Act (ESA). Captive broodstock and captive rearing programs are a form of artificial propagation that are emerging as an important component of restoration efforts for ESA-listed salmon populations that are at critically low numbers. Captive broodstocks, reared in captivity for the entire life cycle, couple the salmon's high fecundity with potentially high survival in protective culture to produce large numbers of juveniles in a single generation for supplementation of natural populations. The captive broodstocks discussed in this report were intended to protect the last known remnants of sockeye salmon that return to Redfish Lake in the Sawtooth Basin of Idaho at the headwaters of the Salmon River. This report addresses NMFS research from 1 September 2000 to 31 August 2001 on the Redfish Lake sockeye salmon captive broodstock and captive rearing program. NMFS currently has broodstock in culture from year classes 1997, 1998, 1999, and 2000 in both the captive broodstock and captive rearing programs. Offspring from these programs are being returned to Idaho to aid recovery efforts for the species.

  20. Snake River Sockeye Salmon Captive Broodstock Program : Hatchery Element : Annual Progress Report, 2000.

    Energy Technology Data Exchange (ETDEWEB)

    Kline, Paul A.; Willard, Catherine

    2001-04-01

    On November 20, 1991, the National Marine Fisheries Service listed Snake River sockeye salmon Oncorhynchus nerka as endangered under the Endangered Species Act of 1973. In 1991, the Idaho Department of Fish and Game, the Shoshone-Bannock Tribes, and the National Marine Fisheries Service initiated efforts to conserve and rebuild populations in Idaho. Initial steps to recover sockeye salmon included the establishment of a captive broodstock program at the Idaho Department of Fish and Game Eagle Fish Hatchery. Sockeye salmon broodstock and culture responsibilities are shared with the National Marine Fisheries Service at two locations adjacent to Puget Sound in Washington State. Activities conducted by the Shoshone-Bannock Tribes and the National Marine Fisheries Service are reported under separate cover. Idaho Department of Fish and Game monitoring and evaluation activities of captive broodstock program fish releases are also reported under separate cover. Captive broodstock program activities conducted between January 1, 2000 and December 31, 2000 are presented in this report.

  1. Redfish Lake Sockeye Salmon Captive Broodstock Rearing and Research, 1995-2000 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Flagg, Thomas A.

    2001-01-01

    The National Marine Fisheries Service (NMFS) Northwest Fisheries Science Center, in cooperation with the Idaho Department of Fish and Game and the Bonneville Power Administration, has established captive broodstocks to aid recovery of Snake River sockeye salmon (Oncorhynchus nerka) listed as endangered under the US Endangered Species Act (ESA). Captive broodstock programs are a form of artificial propagation and are emerging as an important component of restoration efforts for ESA-listed salmon populations. However, they differ from standard hatchery techniques in one important respect: fish are cultured in captivity for the entire life cycle. The high fecundity of Pacific salmon, coupled with their potentially high survival in protective culture, affords an opportunity for captive broodstocks to produce large numbers of juveniles in a single generation for supplementation of natural populations. The captive broodstocks discussed in this report were intended to protect the last known remnants of this stock: sockeye salmon that return to Redfish Lake in the Sawtooth Basin of Idaho at the headwaters of the Salmon River. This report addresses NMFS research from January 1995 to August 2000 on the Redfish Lake sockeye salmon captive broodstock program and summarizes results since the beginning of the study in 1991. Since initiating captive brood culture in 1991, NMFS has returned 742,000 eyed eggs, 181 pre-spawning adults, and over 90,000 smolts to Idaho for recovery efforts. The first adult returns to the Stanley Basin from the captive brood program began with 7 in 1999, and increased to about 250 in 2000. NMFS currently has broodstock in culture from year classes 1996, 1997, 1998, and 1999 in both the captive broodstock program, and an adult release program. Spawn from NMFS Redfish Lake sockeye salmon captive broodstocks is being returned to Idaho to aid recovery efforts for the species.

  2. Biofloc technology applied to rear shrimp Litopenaeus Stylirostris broodstock: An integrated and development research project in New Caledonia and French Polynesia

    OpenAIRE

    Chim, Liet; Cardona, Emilie; Lorgeoux, Benedicte; Gueguen, Yannick; Saulnier, Denis; Goguenheim, Jean; Wantiez, Laurent; Cahu, Chantal

    2014-01-01

    Shrimp farming in New-Caledonia faces up to difficulties. A fluctuating quality of broodstock prevents sustainable production of larvae in quantity and quality. The traditional extensive rearing method of broodstock in outdoor earthen ponds used in New Caledonia raises several issues: poor water quality control and biosecurity. Therefore it is fundamental to modify the broodstock culture strategy in order to achieve an easier water quality management and maximal biosecurity. Biofloc technolog...

  3. Redfish Lake Sockeye Salmon Captive Broodstock Rearing and Research, Annual Report 2001-2002.

    Energy Technology Data Exchange (ETDEWEB)

    Frost, Deborah; McAuley, W.; Maynard, Desmond

    2003-04-01

    The National Marine Fisheries Service (NMFS) Northwest Fisheries Science Center, in cooperation with the Idaho Department of Fish and Game and the Bonneville Power Administration, has established captive broodstock programs to aid recovery of Snake River sockeye salmon (Oncorhynchus nerka) listed as endangered under the U.S. Endangered Species Act (ESA). Captive broodstock and captive rearing programs are a form of artificial propagation that are emerging as an important component of restoration efforts for ESA-listed salmon populations that are at critically low numbers. Captive broodstocks, reared in captivity for the entire life cycle, couple the salmon's high fecundity with potentially high survival in protective culture to produce large numbers of juveniles in a single generation for supplementation of natural populations. The captive broodstocks discussed in this report were intended to protect the last known remnants of sockeye salmon that return to Redfish Lake in the Sawtooth Basin of Idaho at the headwaters of the Salmon River. This report addresses NMFS activities from 1 September 2001 to 31 August 2002 on the Redfish Lake sockeye salmon captive broodstock and captive rearing program. NMFS currently has broodstocks in culture from year classes 1997, 1998, 1999, 2000, and 2001 in both the captive breeding and captive rearing programs. Offspring from these programs are being returned to Idaho to aid recovery efforts for the species.

  4. Snake River Sockeye Salmon Captive Broodstock Program; Hatchery Element, 1999 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Baker, Dan J,; Heindel, Jeff A.; Kline, Paul A. (Idaho Department of Fish and Game, Boise, ID)

    2005-08-01

    On November 20, 1991, the National Marine Fisheries Service listed Snake River sockeye salmon Oncorhynchus nerka as endangered under the Endangered Species Act of 1973. In 1991, the Idaho Department of Fish and Game, the Shoshone-Bannock Tribes, and the National Marine Fisheries Service initiated efforts to conserve and rebuild populations in Idaho. Initial steps to recover sockeye salmon included the establishment of a captive broodstock program at the Idaho Department of Fish and Game Eagle Fish Hatchery. Sockeye salmon broodstock and culture responsibilities are shared with the National Marine Fisheries Service at two locations adjacent to Puget Sound in Washington State. Activities conducted by the Shoshone-Bannock Tribes and the National Marine Fisheries Service are reported under separate cover. Idaho Department of Fish and Game monitoring and evaluation activities of captive broodstock program fish releases are also reported under separate cover. Captive broodstock program activities conducted between January 1, 1999 and December 31, 1999 are presented in this report. In 1999, seven anadromous sockeye salmon returned to the Sawtooth Valley and were captured at the adult weir located on the upper Salmon River. Four anadromous adults were incorporated in the captive broodstock program spawning design for year 1999. The remaining three adults were released to Redfish Lake for natural spawning. All seven adults were adipose and left ventral fin-clipped, indicating hatchery origin. One sockeye salmon female from the anadromous group and 81 females from the captive broodstock group were spawned at the Eagle Fish Hatchery in 1999. Spawn pairings produced approximately 63,147 eyed-eggs with egg survival to eyed-stage of development averaging 38.97%. Eyed-eggs (20,311), presmolts (40,271), smolts (9,718), and adults (21) were planted or released into Sawtooth Valley waters in 1999. Supplementation strategies involved releases to Redfish Lake, Redfish Lake Creek

  5. Redfish Lake Sockeye Salmon Captive Broodstock Rearing and Research, 1993 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Flagg, Thomas A.

    1994-11-01

    The National Marine Fisheries Service (NMFS), in cooperation with Idaho and BPA, has established captive broodstocks to aid recovery of endangered Snake River sockeye salmon. NMFS is currently maintaining four separate Redfish Lake sockeye Salmon captive broodstocks; all these broodstocks are being reared full-term to maturity in fresh (well) water. Experiments are also being conducted on nonendangered 1990 and 1991-brood Lake Wenatchee (WA) sockeye salmon to compare effects on survival and reproduction to maturity in fresh water and seawater; for both brood-years, fish reared in fresh water were larger than those reared in seawater. Data from captive rearing experiments suggest a ranking priority of circular tanks supplied with pathogen-free fresh water, circular tanks supplied with pumped/filtered/uv-sterilized seawater, and seawater net-pens for rearing sockeye salmon to maturity.

  6. Snake River Sockeye Salmon Captive Broodstock Program; Hatchery Element, 1998 Annual Progress Report.

    Energy Technology Data Exchange (ETDEWEB)

    Kline, Paul A.; Heindel, Jeff A.

    1999-12-01

    On November 20, 1991, the National Marine Fisheries Service listed Snake River sockeye salmon as endangered under the Endangered Species Act of 1973. In 1991, the Idaho Department of Fish and Game, the Shoshone-Bannock Tribes, and NMFS initiated efforts to conserve and rebuild populations in Idaho. Captive broodstock program activities conducted between January 1, 1998 and December 31, 1998, are presented in this report.

  7. Snake River Sockeye Salmon Captive Broodstock; Research Element, 1993 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Keith A.

    1995-12-01

    In 1991, the National Marine Fisheries Service listed Snake River sockeye salmon Oncorhynchus nerka as endangered under the Endangered Species Act of 1973. Initial steps to recover the species include the establishment of captive broodstocks at the Eagle Fish Hatchery in Eagle, Idaho. Research and recovery activities for sockeye conducted by the Idaho Department of Fish and Game during the period of April 1993 to April 1994 are covered by this report. Eight anadromous adults (two female and six male) returned to the Redfish Lake Creek trap this year and were spawned at the Sawtooth Hatchery near Stanley, Idaho. Fecundity was 3160 for each female. The mean fertilization rate was 52% for female {open_quotes}A{close_quotes} and 65% for female {open_quotes}B.{close_quotes} Captive broodstock also spawned as well as residual sockeye captured in a Merwin trap in Redfish Lake. Spawning data from 72 fish spawned during this period is included in this report. Captive broodstock also matured later than normal (winter and spring 1994). Fish were spawned and samples were taken to investigate reasons for poor fertilization rates. Twenty-four out migrants of 1991 were selected for return to Redfish Lake for volitional spawning. Releases were made in August of 1993. All fish were implanted with sonic tags and tracking of this group began soon after the release to identify spawning-related activities. A research project is being conducted on captive broodstock diets. The project will investigate the effect of diet modification on spawn timing, gamete quality, and fertilization rates. A second project used ultrasound to examine fish for sexual maturity. The goal was to obtain a group a fish to be released f or volitional spawning. A total of 44 fish were found to be mature. The performance of all captive groups held at Eagle are included in this report.

  8. Grande Ronde Basin Spring Chinook Salmon Captive Broodstock Program, 2008 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Hoffnagle, Timothy L.; Hair, Donald; Gee, Sally

    2009-03-31

    The Grande Ronde Basin Spring Chinook Salmon Captive Broodstock Program is designed to rapidly increase numbers of Chinook salmon in stocks that are in imminent danger of extirpation in Catherine Creek (CC), Lostine River (LR) and upper Grande Ronde River (GR). Natural parr are captured and reared to adulthood in captivity, spawned (within stocks) and their progeny reared to smoltification before being released into the natal stream of their parents. This program is co-managed by ODFW, National Marine Fisheries Service, Nez Perce Tribe and Confederated Tribes of the Umatilla Indian Reservation. Presmolt rearing was initially conducted at Lookingglass Fish Hatchery (LFH) but parr collected in 2003 and later were reared at Wallowa Fish Hatchery (WFH). Post-smolt rearing is conducted at Bonneville Fish Hatchery (BOH - freshwater) and at Manchester Research Station (MRS - saltwater). The CC and LR programs are being terminated, as these populations have achieved the goal of a consistent return of 150 naturally spawning adults, so the 2005 brood year was the last brood year collected for theses populations. The Grande Ronde River program continued with 300 fish collected each year. Currently, we are attempting to collect 150 natural parr and incorporate 150 parr collected as eggs from females with low ELISA levels from the upper Grande Ronde River Conventional Hatchery Program. This is part of a comparison of two methods of obtaining fish for a captive broodstock program: natural fish vs. those spawned in captivity. In August 2007, we collected 152 parr (BY 2006) from the upper Grande Ronde River and also have 155 Grande Ronde River parr (BY 2006) that were hatched from eyed eggs at LFH. During 2008, we were unable to collect natural parr from the upper Grande Ronde River. Therefore, we obtained 300 fish from low ELISA females from the upper Grande Ronde River Conventional Program. In October 2008 we obtained 170 eyed eggs from the upper Grande Ronde river Conventional

  9. Snake River Sockeye Salmon Captive Broodstock Program; Research Element, 2003 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Willard, Catherine; Plaster, Kurtis; Castillo, Jason (Idaho Department of Fish and Game, Boise, ID)

    2005-01-01

    On November 20, 1991, the National Oceanic Atmospheric Administration listed Snake River sockeye salmon Oncorhynchus nerka as endangered under the Endangered Species Act of 1973. In 1991, the Shoshone-Bannock Tribes (SBT) and Idaho Department of Fish and Game (IDFG) initiated the Snake River Sockeye Salmon Captive Broodstock Program to conserve and rebuild populations in Idaho. Restoration efforts are focused on Redfish, Pettit, and Alturas lakes within the Sawtooth Valley. The first release of hatchery-produced adults occurred in 1993. The first release of juvenile sockeye salmon from the captive broodstock program occurred in 1994. In 1999, the first anadromous adult returns from the captive broodstock program were recorded when six jacks and one jill were captured at the IDFG Sawtooth Fish Hatchery. In 2003, progeny from the captive broodstock program were released using three strategies: eyed-eggs were planted in Pettit and Alturas lakes in November and December, age-0 presmolts were released to Alturas, Pettit, and Redfish lakes in October, and hatchery-produced adult sockeye salmon were released to Redfish Lake for volitional spawning in September. Oncorhynchus nerka population monitoring was conducted on Redfish, Alturas, and Pettit lakes using a midwater trawl in September 2003. Age-0 through age-4 O. nerka were captured in Redfish Lake, and population abundance was estimated at 81,727 fish. Age-0 through age-3 O. nerka were captured in Alturas Lake, and population abundance was estimated at 46,234 fish. Age-0 through age-3 O. nerka were captured in Pettit Lake, and population abundance was estimated at 11,961 fish. Angler surveys were conducted from May 25 through August 7, 2003 on Redfish Lake to estimate kokanee harvest. On Redfish Lake, we interviewed 179 anglers and estimated that 424 kokanee were harvested. The calculated kokanee catch rate was 0.09 fish/hour. The juvenile out-migrant trap on Redfish Lake Creek was operated from April 15 to May 29

  10. Snake River Fall Chinook Salmon Broodstock Program, 1983. Annual progress report

    Energy Technology Data Exchange (ETDEWEB)

    Harrell, L.W.

    1984-03-01

    The objective of the Snake River Fall Chinook Salmon Broodstock Program is to hatch eggs from upriver stocks, rear the fish to maturity and spawning, and use the eggs for restoration purposes in the Snake River. Approximately 15,000 eyed eggs for 1980- and 1981-brood Snake River fall chinook salmon were obtined each winter in 1980 and 1981. Approximately 13,000 ''button-up'' fry from the 1982 brood were received in March 1983. Since August 1983, the mortality in the 1980-brood fish in marine net-pens has been unusually high. These losses are related to a systematic infection with a previously unreported fungal pathogen. Also responsible for considerable mortality are the approximately 25% maturing males in the population. As of 16 December 1983, 1917 1980-brood Snake River fall chinook salmon, averaging 1050 g, are being maintained in marine net-pens at the Manchester Marine Experimental Station, Manchester, Washington. Currently, 4090 1981-brood chinook salmon with an average weight of 200 g are in net-pens at Manchester. The new fungal disease has also been observed in these fish, but it is causing minimal mortality. Approximately 6000 1982-brood fish (15 g average weight) are currently at the Big Beef Creek Research Station, Seabeck, Washington, or have been acclimated to seawater. All the fish will be in marine net-pens at Manchester by May 1984. 2 figs.

  11. Snake River Sockeye Salmon Captive Broodstock Program; Research Element, 2003 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Willard, Catherine; Plaster, Kurtis; Castillo, Jason (Idaho Department of Fish and Game, Boise, ID)

    2005-01-01

    On November 20, 1991, the National Oceanic Atmospheric Administration listed Snake River sockeye salmon Oncorhynchus nerka as endangered under the Endangered Species Act of 1973. In 1991, the Shoshone-Bannock Tribes (SBT) and Idaho Department of Fish and Game (IDFG) initiated the Snake River Sockeye Salmon Captive Broodstock Program to conserve and rebuild populations in Idaho. Restoration efforts are focused on Redfish, Pettit, and Alturas lakes within the Sawtooth Valley. The first release of hatchery-produced adults occurred in 1993. The first release of juvenile sockeye salmon from the captive broodstock program occurred in 1994. In 1999, the first anadromous adult returns from the captive broodstock program were recorded when six jacks and one jill were captured at the IDFG Sawtooth Fish Hatchery. In 2003, progeny from the captive broodstock program were released using three strategies: eyed-eggs were planted in Pettit and Alturas lakes in November and December, age-0 presmolts were released to Alturas, Pettit, and Redfish lakes in October, and hatchery-produced adult sockeye salmon were released to Redfish Lake for volitional spawning in September. Oncorhynchus nerka population monitoring was conducted on Redfish, Alturas, and Pettit lakes using a midwater trawl in September 2003. Age-0 through age-4 O. nerka were captured in Redfish Lake, and population abundance was estimated at 81,727 fish. Age-0 through age-3 O. nerka were captured in Alturas Lake, and population abundance was estimated at 46,234 fish. Age-0 through age-3 O. nerka were captured in Pettit Lake, and population abundance was estimated at 11,961 fish. Angler surveys were conducted from May 25 through August 7, 2003 on Redfish Lake to estimate kokanee harvest. On Redfish Lake, we interviewed 179 anglers and estimated that 424 kokanee were harvested. The calculated kokanee catch rate was 0.09 fish/hour. The juvenile out-migrant trap on Redfish Lake Creek was operated from April 15 to May 29

  12. Snake River Sockeye Salmon Captive Broodstock Program; Research Element, 2001 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Hebdon, J. Lance; Castillo, Jason; Willard, Catherine (Idaho Department of Fish and Game, Boise, ID)

    2003-12-01

    On November 20, 1991, the National Marine Fisheries Service listed Snake River sockeye salmon Oncorhynchus nerka as endangered under the Endangered Species Act of 1973. In 1991, the Shoshone-Bannock Tribes and Idaho Department of Fish and Game initiated the Snake River Sockeye Salmon Sawtooth Valley Project to conserve and rebuild populations in Idaho. Restoration efforts are focusing on Redfish, Pettit, and Alturas lakes within the Sawtooth Valley. The first release of hatchery-produced juvenile sockeye salmon from the captive broodstock program occurred in 1994. The first anadromous adult returns from the captive broodstock program were recorded in 1999, when six jacks and one jill were captured at Idaho Department of Fish and Game's Sawtooth Fish Hatchery. In 2001, progeny from the captive broodstock program were released using four strategies: age-0 presmolts were released to all three lakes in October and to Pettit and Alturas lakes in July; age-1 smolts were released to Redfish Lake Creek, and hatchery-produced adult sockeye salmon were released to Redfish Lake for volitional spawning in September along with anadromous adult sockeye salmon that returned to the Sawtooth basin and were not incorporated into the captive broodstock program. Kokanee population monitoring was conducted on Redfish, Alturas, and Pettit lakes using a midwater trawl in September. Only age-0 and age-1 kokanee were captured on Redfish Lake, resulting in a population estimate of 12,980 kokanee. This was the second lowest kokanee abundance estimated since 1990. On Alturas Lake age-0, age-1, and age-2 kokanee were captured, and the kokanee population was estimated at 70,159. This is a mid range kokanee population estimate for Alturas Lake, which has been sampled yearly since 1990. On Pettit Lake only age-1 kokanee were captured, and the kokanee population estimate was 16,931. This estimate is in the midrange of estimates of the kokanee population in Pettit Lake, which has been sampled

  13. Research on Captive Broodstock Programs for Pacific Salmon, 2001-2002 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Berejikian, Barry A.; Tezak, E.P. (National Marine Fisheries Service); Endicott, Rick (Long Live the Kings, Seattle, WA)

    2002-08-01

    In the 2000 Federal Columbia River Power System (FCRPS) Biological Opinion, NMFS identified six populations of steelhead and several salmon populations that had dropped to critically low levels and continue to decline. Following thorough risk-benefit analyses, captive propagation programs for some or all of the steelhead (Oncorhynchus mykiss) populations may be required to reduce the risk of extinction, and more programs may be required in the future. Thus, captive propagation programs designed to maintain or rebuild steelhead populations require intensive and rigorous scientific evaluation, much like the other objectives of BPA Project 1993-056-00 currently underway for chinook (O. tshawytscha) and sockeye salmon (O. nerka). Pacific salmon reared to the adult stage in captivity exhibit poor reproductive performance when released to spawn naturally. Poor fin quality and swimming performance, incomplete development of secondary sex characteristics, changes in maturation timing, and other factors may contribute to reduced spawning success. Improving natural reproductive performance is critical for the success of captive broodstock programs in which adult-release is a primary reintroduction strategy for maintaining ESA-listed populations.

  14. Snake River Sockeye Salmon Captive Broodstock Program Research Elements : 2007 Annual Project Progess Report.

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, Mike; Plaster, Kurtis; Redfield, Laura; Heindel, Jeff; Kline, Paul

    2008-12-17

    On November 20, 1991, the National Oceanic Atmospheric Administration listed Snake River sockeye salmon Oncorhynchus nerka as endangered under the Endangered Species Act of 1973. In 1991, the Shoshone-Bannock Tribes (SBT) and Idaho Department of Fish and Game (IDFG) initiated the Snake River Sockeye Salmon Captive Broodstock Program to conserve and rebuild populations in Idaho. Restoration efforts are focused on Redfish, Pettit, and Alturas lakes within the Sawtooth Valley. The first release of hatchery-produced adults occurred in 1993. The first release of juvenile sockeye salmon from the captive broodstock program occurred in 1994. In 1999, the first anadromous adult returns from the captive broodstock program were recorded when six jacks and one jill were captured at the IDFG Sawtooth Fish Hatchery. In 2007, progeny from the captive broodstock program were released using four strategies: (1) eyed-eggs were planted in Pettit Lake in November; (2) age-0 presmolts were released to Alturas, Pettit, and Redfish lakes in October; (3) age-1 smolts were released into Redfish Lake Creek and the upper Salmon River in May; and (4) hatchery-produced adult sockeye salmon were released to Redfish Lake for volitional spawning in September. Oncorhynchus nerka population monitoring was conducted on Redfish, Alturas, and Pettit lakes using a midwater trawl in September 2007. Population abundances were estimated at 73,702 fish for Redfish Lake, 124,073 fish for Alturas Lake, and 14,746 fish for Pettit Lake. Angler surveys were conducted from May 26 through August 7, 2007 on Redfish Lake to estimate kokanee harvest. On Redfish Lake, we interviewed 102 anglers and estimated that 56 kokanee were harvested. The calculated kokanee catch rate was 0.03 fish/hour for each kokanee kept. The juvenile out-migrant trap on Redfish Lake Creek was operated from April 14 to June 13, 2007. We estimated that 5,280 natural origin and 14,256 hatchery origin sockeye salmon smolts out-migrated from

  15. Snake River Spring/Summer Chinook Captive Broodstock Rearing and Research, 2002 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    McAuley, W. Carlin; Maynard, Desmond J. (National Marine Fishereis Service, Northwest Fisheries Science Center, Seattle, WA)

    2003-03-01

    In 1995, the National Marine Fisheries Service (NMFS), in cooperation with the Idaho Department of Fish and Game (IDFG), the Oregon Department of Fish and Wildlife (ODFW), and the Bonneville Power Administration (BPA) established captive broodstock programs to aid in the recovery of Snake River spring/summer chinook salmon (Oncorhynchus tshawytscha) listed as endangered under the U.S. Endangered Species Act (ESA). These programs were intended to provide safety nets for Salmon and Grande Ronde River Basins spring/summer chinook salmon stocks. They also provide a basis of examining the efficacy of captive rearing and captive breeding programs as tools for recovering listed salmonid populations. In years when no or few naturally produced fish return from the sea, captive fish and their progeny can be used to maintain populations in these two Snake River Basin tributaries. The NMFS facility at Manchester, WA, provides the crucial seawater environment needed to culture anadromous salmonids during the marine phase of their life cycle. At the Manchester Research Station, the fish are cultured in 6.1m diameter circular tanks housed in a fully enclosed and secure building. The tanks are supplied with seawater that has been processed to eliminate most marine pathogens. The fish are fed a commercially prepared diet and held at densities and loading rates designed to maximize fish quality. When fish begin to mature, they are transferred to ODFW or IDFG freshwater facilities in Oregon and Idaho for final maturation. The states then release the mature fish (Idaho) or their progeny (Oregon) back into their native Snake River tributary waters in restoration efforts. In FY 2002, NMFS cultured 1996, 1997, 1998, 1999, and 2000 broodyear fish at its Manchester Facility. This report addresses program activities from September 1, 2001 to August 31, 2002.

  16. Snake River Spring/Summer Chinook Captive Broodstock Rearing and Research, 2001 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    McAuley, W. Carlin; Flagg, Thomas N. (National Marine Fisheries Service, Northwest Fisheries Science Center, Seattle, WA)

    2003-03-01

    In 1995, the National Marine Fisheries Service (NMFS), in cooperation with the Idaho Department of Fish and Game (IDFG), the Oregon Department of Fish and Wildlife (ODFW), and the Bonneville Power Administration (BPA) established captive broodstock programs to aid in the recovery of Snake River spring/summer chinook salmon (Oncorhynchus tshawytscha) listed as endangered under the U.S. Endangered Species Act (ESA). These programs were intended to provide safety nets for Salmon and Grande Ronde River Basins spring/summer chinook salmon stocks. They also provide a basis of examining the efficacy of captive rearing and captive breeding programs as tools for recovering listed salmonid populations. In years when no or few naturally produced fish return from the sea, captive fish and their progeny can be used to maintain populations in these two Snake River Basin tributaries. The NMFS facility at Manchester, WA, provides the crucial seawater environment needed to culture anadromous salmonids during the marine phase of their life cycle. At the Manchester Research Station, the fish are cultured in 6.1m diameter circular tanks housed in a fully enclosed and secure building. The tanks are supplied with seawater that has been processed to eliminate most marine pathogens. The fish are fed a commercially prepared diet and held at densities and loading rates designed to maximize fish quality. When fish begin to mature, they are transferred to ODFW or IDFG freshwater facilities in Oregon and Idaho for final maturation. The states then release the mature fish (Idaho) or their progeny (Oregon) back into their native Snake River tributary waters in restoration efforts. In FY 2001, NMFS cultured 1996, 1997, 1998, and 1999 broodyear fish at its Manchester Facility. This report addresses program activities from September 1, 2000 to August 31, 2001.

  17. Snake River Spring/Summer Chinook Captive Broodstock Rearing and Research, 2003 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Maynard, Desmond J.; McAuley, W. Carlin (National Marine Fisheries Service, Northwest Fisheries Science Center, Resource Enhancement and Utilization, Seattle, WA)

    2004-08-01

    In 1995, the National Marine Fisheries Service (NMFS), in cooperation with the Idaho Department of Fish and Game (IDFG), the Oregon Department of Fish and Wildlife (ODFW), and the Bonneville Power Administration (BPA) established captive broodstock programs to aid in the recovery of Snake River spring/summer chinook salmon (Oncorhynchus tshawytscha) listed as endangered under the U.S. Endangered Species Act (ESA). These programs are intended to provide safety nets for Salmon and Grande Ronde River Basins spring/summer chinook salmon stocks. They also provide a basis of examining the efficacy of captive rearing and captive breeding programs as tools for recovering listed salmonid populations. In years when no or few naturally produced fish return from the sea, captive fish and their progeny can be used to maintain populations in these two Snake River Basin tributaries. The NMFS facility at Manchester, WA provides the crucial seawater environment needed to culture anadromous salmonids during the marine phase of their life cycle. At the Manchester Research Station, the fish are cultured in 6.1m diameter circular tanks housed in a fully enclosed and secure building. The tanks are supplied with seawater that has been processed to eliminate most marine pathogens. The fish are fed a commercially prepared diet and held at densities and loading rates intended to maximize fish quality. When fish begin to mature, they are transferred to ODFW or IDFG freshwater facilities in Oregon and Idaho for final maturation. The states then release the mature fish (Idaho) or their progeny (Oregon) back into their native Snake River tributary waters in restoration efforts. In FY 2003, NMFS cultured 1998, 1999, 2000, and 2001 broodyear fish at its Manchester Facility. This report addresses program activities from September 1, 2002 to August 31, 2003.

  18. "Research to Improve the Efficacy of Captive Broodstock Programs and Advance Hatchery Reform Throughout the Columbia River Basin." [from the Abstract], 2007-2008 Annual Progress Report.

    Energy Technology Data Exchange (ETDEWEB)

    Berejikian, Barry A. [National Marine Fisheries Service

    2009-04-08

    This project was developed to conduct research to improve the efficacy of captive broodstock programs and advance hatchery reform throughout the Columbia river basin. The project has three objectives: (1) maintain adaptive life history characteristics in Chinook salmon, (2) improve imprinting in juvenile sockeye salmon, and (3) match wild phenotypes in Chinook and sockeye salmon reared in hatcheries. A summary of the results are as follows: Objective 1: Adult and jack Chinook salmon males were stocked into four replicate spawning channels at a constant density (N = 16 per breeding group), but different ratios, and were left to spawn naturally with a fixed number of females (N = 6 per breeding group). Adult males obtained primary access to females and were first to enter the nest at the time of spawning. Jack male spawning occurred primarily by establishing satellite positions downstream of the courting pair, and 'sneaking' into the nest at the time of spawning. Male dominance hierarchies were fairly stable and strongly correlated with the order of nest entry at the time of spawning. Spawning participation by jack and adult males is consistent with a negative frequency dependent selection model, which means that selection during spawning favors the rarer life history form. Results of DNA parentage assignments will be analyzed to estimate adult-to-fry fitness of each male. Objective 2: To determine the critical period(s) for imprinting for sockeye salmon, juvenile salmon were exposed to known odorants at key developmental stages. Molecular assessments of imprinting-induced changes in odorant receptor gene expression indicated that regulation of odorant expression is influenced by developmental status and odor exposure history. The results suggest that sockeye salmon are capable of imprinting to homing cues during the developmental periods that correspond to several of current release strategies employed as part of the Captive Broodstock program

  19. 2016 Annual Technology Baseline (ATB)

    Energy Technology Data Exchange (ETDEWEB)

    Cole, Wesley; Kurup, Parthiv; Hand, Maureen; Feldman, David; Sigrin, Benjamin; Lantz, Eric; Stehly, Tyler; Augustine, Chad; Turchi, Craig; O' Connor, Patrick; Waldoch, Connor

    2016-09-01

    Consistent cost and performance data for various electricity generation technologies can be difficult to find and may change frequently for certain technologies. With the Annual Technology Baseline (ATB), National Renewable Energy Laboratory provides an organized and centralized dataset that was reviewed by internal and external experts. It uses the best information from the Department of Energy laboratory's renewable energy analysts and Energy Information Administration information for conventional technologies. The ATB will be updated annually in order to provide an up-to-date repository of current and future cost and performance data. Going forward, we plan to revise and refine the values using best available information. The ATB includes both a presentation with notes (PDF) and an associated Excel Workbook. The ATB includes the following electricity generation technologies: land-based wind; offshore wind; utility-scale solar PV; concentrating solar power; geothermal power; hydropower plants (upgrades to existing facilities, powering non-powered dams, and new stream-reach development); conventional coal; coal with carbon capture and sequestration; integrated gasification combined cycle coal; natural gas combustion turbines; natural gas combined cycle; conventional biopower. Nuclear laboratory's renewable energy analysts and Energy Information Administration information for conventional technologies. The ATB will be updated annually in order to provide an up-to-date repository of current and future cost and performance data. Going forward, we plan to revise and refine the values using best available information.

  20. Institute for Energy Technology, Annual Report 1981

    International Nuclear Information System (INIS)

    The annual report gives a brief account of the activities of Institute for Energy Technology and presents a fairly comprehensive anasis of the budgetary dispositions in 1981 and, for comparison, 1980. (RF)

  1. Technology Deployment Annual Report 2009

    Energy Technology Data Exchange (ETDEWEB)

    Keith Arterburn

    2009-12-01

    Idaho National Laboratory (INL) is a Department of Energy (DOE) multi-program national laboratory that conducts research and development in all DOE mission areas. Like all other federal laboratories, INL has a statutory, technology transfer mission to make its capabilities and technologies available to all federal agencies, to state and local governments, and to universities and industry. To fulfill this mission, INL encourages its scientific, engineering, and technical staff to disclose new inventions and creations to ensure the resulting intellectual property is captured, protected, and made available to others who might benefit from it. As part of the mission, intellectual property is licensed to industrial partners for commercialization, creating jobs and delivering the benefits of federally funded technology to consumers. In other cases, unique capabilities are made available to other federal agencies or to regional small businesses to solve specific technical challenges. In other interactions, INL employees work cooperatively with researchers and other technical staff of our partners to further develop emerging technologies. This report is a catalog of selected INL technology transfer and commercialization transactions during this past year. The size and diversity of INL technical resources, coupled with the large number of relationships with other organizations, virtually ensures that a report of this nature will fail to capture all interactions. Recognizing this limitation, this report focuses on transactions that are specifically authorized by technology transfer legislation (and corresponding contractual provisions) or involve the transfer of legal rights to technology to other parties.

  2. Characterizing the Genetic Diversity of Rainbow Trout in Support of Broodstock Development

    Science.gov (United States)

    The use of molecular genetic technologies for broodstock management and selective breeding of aquaculture species is becoming increasingly more common with the continued development of species-specific genome tools and reagents. Rainbow trout are the most widely produced salmonid in the US, attract...

  3. Hazards Control Department annual technology review, 1984

    International Nuclear Information System (INIS)

    The Annual Technology Review covers the period from October 1983 to September 1984. Topics reviewed include Nuclear Criticality Information System, nuclear dosimetry, personnel dosimetry, laser chemistry, electric filters and neutron spectrometry. Individual papers are indexed and abstracted for the data base. (DT)

  4. Laser Science & Technology Program Annual Report - 2000

    Energy Technology Data Exchange (ETDEWEB)

    Chen, H-L

    2001-03-20

    The Laser Science and Technology (LS&T) Program Annual Report 2001 provides documentation of the achievements of the LLNL LS&T Program during the April 2001 to March 2002 period using three formats: (1) an Overview that is a narrative summary of important results for the year; (2) brief summaries of research and development activity highlights within the four Program elements: Advanced Lasers and Components (AL&C), Laser Optics and Materials (LO&M), Short Pulse Laser Applications and Technologies (SPLAT), and High-Energy Laser System and Tests (HELST); and (3) a compilation of selected articles and technical reports published in reputable scientific or technology journals in this period. All three elements (Annual Overview, Activity Highlights, and Technical Reports) are also on the Web: http://laser.llnl.gov/lasers/pubs/icfq.html. The underlying mission for the LS&T Program is to develop advanced lasers, optics, and materials technologies and applications to solve problems and create new capabilities of importance to the Laboratory and the nation. This mission statement has been our guide for defining work appropriate for our Program. A major new focus of LS&T beginning this past year has been the development of high peak power short-pulse capability for the National Ignition Facility (NIF). LS&T is committed to this activity.

  5. Annual meeting on nuclear technology 2011. Documentation

    International Nuclear Information System (INIS)

    The program of annual meeting on nuclear technology 2011 included plenary sessions, topical sessions, a workshop and technical sessions. The topical sessions covered the following topics: the final waste disposal, from scientific basis to application; nuclear competence in Germany and Europe; sodium cooled fast reactors; characteristics of a high reliability organization (HRO) considering experience gained from events at nuclear power stations; CFD simulations for safety related tasks. The workshop concerned the issue preserving competence in nuclear technology. The technical sessions covered the following issues: reactor physics and methods of calculations; Thermo- and fluid dynamics; radioactive waste management - storage; fusion technology; safety of nuclear installations - methods, analyses, results; operation of nuclear installations; decommissioning of nuclear installations; education, expert knowledge, know-how transfer; new build and innovations; front end of the fuel cycle, fuel elements and core components, radiation protection; energy industry and economics.

  6. Second annual clean coal technology conference: Proceedings

    International Nuclear Information System (INIS)

    The Second Annual Clean Coal Technology Conference was held at Atlanta, Georgia, September 7--9, 1993. The Conference, cosponsored by the US Department of Energy (USDOE) and the Southern States Energy Board (SSEB), seeks to examine the status and role of the Clean Coal Technology Demonstration Program (CCTDP) and its projects. The Program is reviewed within the larger context of environmental needs, sustained economic growth, world markets, user performance requirements and supplier commercialization activities. This will be accomplished through in-depth review and discussion of factors affecting domestic and international markets for clean coal technology, the environmental considerations in commercial deployment, the current status of projects, and the timing and effectiveness of transfer of data from these projects to potential users, suppliers, financing entities, regulators, the interested environmental community and the public. Individual papers have been entered separately

  7. Chemical Technology Division Annual Report 2000

    International Nuclear Information System (INIS)

    The Chemical Technology Division (CMT) is one of eight engineering research divisions within Argonne National Laboratory (ANL), one of the U.S. government's oldest and largest research laboratories. The University of Chicago oversees the laboratory on behalf of the U.S. Department of Energy (DOE). Argonne's mission is to conduct basic scientific research, to operate national scientific facilities, to enhance the nation's energy resources, and to develop better ways to manage environmental problems. Argonne has the further responsibility of strengthening the nation's technology base through developing industrial technology and transferring that technology to industry. The Chemical Technology Division is a diverse early-stage engineering organization, specializing in the treatment of spent nuclear fuel, development of advanced power sources, and management of both high- and low-level nuclear wastes. Although this work is often indistinguishable from basic research, our efforts are directed toward the practical devices and processes that are covered by ANL's mission. Additionally, the Division operates the Analytical Chemistry Laboratory, which provides a broad range of analytical services to ANL and other organizations. The Division is multi-disciplinary. Its people have formal training as ceramists; physicists; material scientists; electrical, mechanical, chemical, and nuclear engineers; and chemists. They have experience working in academia, urban planning, and the petroleum, aluminum, and automotive industries. Their skills include catalysis, ceramics, electrochemistry, metallurgy, nuclear magnetic resonance spectroscopy, and petroleum refining, as well as the development of nuclear waste forms, batteries, and high-temperature superconductors. In this annual report we present an overview of the technical programs together with representative highlights. The report is not intended to be comprehensive or encyclopedic, but to serve as an indication of the condition

  8. 2006 annual nuclear technology conference Aachen

    International Nuclear Information System (INIS)

    This year's ANNUAL NUCLEAR TECHNOLOGY CONFERENCE (JK) was organized in Aachen by the Deutsches Atomforum e.V. (DAtF) and the Kerntechnische Gesellschaft e.V. (KTG). The attendance by more than 1,200 participants from 17 nations underlines the role of this specialized congress as one of the leading events in the field of nuclear power use. For several years in a row, the number of participants has been increasing steadily. The first conference day offered plenary presentations traditionally dealing mainly with political and economic issues of the use of nuclear power, including a presentation by the President of the DAtF. The lead countries of JK 2006 were Belgium and Finland with contributions to the plenary day and special meetings on selected topics. The traditional proven scheme of the three-day meeting offered plenary sessions on the first day, and technical sessions, topical sessions, poster sessions, and special events on the following days. The 'Nuclear Power Campus' was run most successfully for the fourth time, presenting to high school students and university freshmen the world of nuclear power in a transparent way. The special commitment to the young generation was stressed at JK 2006 also by the 'Competence Preservation in Nuclear Technology' workshop. Nearly 2 dozen young scientists used the forum to present results of their work. The meeting was accompanied by a technical exhibition with meeting points established by vendors, suppliers, and service providers. (orig.)

  9. Physics and Advanced Technologies 2001 Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    Jacobs, R

    2002-05-09

    The Physics and Advanced Technologies (PAT) Directorate was created in July 2000 by Bruce Tarter, Director of Lawrence Livermore National Laboratory (LLNL). The Director called for the new organization to execute and support programs that apply cutting-edge physics and advanced technology to develop integrated solutions to problems in national security, fusion energy, information science, health care, and other national grand challenges. When I was appointed a year later as the PAT Directorate's first Associate Director, I initiated a strategic planning project to develop a vision, mission, and long-term goals for the Directorate. We adopted the goal of becoming a leader in frontier physics and technology for twenty-first-century national security missions: Stockpile Stewardship, homeland security, energy independence, and the exploration of space. Our mission is to: (1) Help ensure the scientific excellence and vitality of the major LLNL programs through its leadership role in performing basic and applied multidisciplinary research and development with programmatic impact, and by recruiting and retaining science and technology leaders; (2) Create future opportunities and directions for LLNL and its major programs by growing new program areas and cutting-edge capabilities that are synergistic with, and supportive of, its national security mission; (3) Provide a direct conduit to the academic and high-tech industrial sectors for LLNL and its national security programs, through which the Laboratory gains access to frontier science and technology, and can impact the science and technology communities; (4) Leverage unique Laboratory capabilities, to advance the state universe. This inaugural PAT Annual Report begins a series that will chronicle our progress towards fulfilling this mission. I believe the report demonstrates that the PAT Directorate has a strong base of capabilities and accomplishments on which to build in meeting its goals. Some of the highlights

  10. Physics and Advanced Technologies 2001 Annual Report

    International Nuclear Information System (INIS)

    The Physics and Advanced Technologies (PAT) Directorate was created in July 2000 by Bruce Tarter, Director of Lawrence Livermore National Laboratory (LLNL). The Director called for the new organization to execute and support programs that apply cutting-edge physics and advanced technology to develop integrated solutions to problems in national security, fusion energy, information science, health care, and other national grand challenges. When I was appointed a year later as the PAT Directorate's first Associate Director, I initiated a strategic planning project to develop a vision, mission, and long-term goals for the Directorate. We adopted the goal of becoming a leader in frontier physics and technology for twenty-first-century national security missions: Stockpile Stewardship, homeland security, energy independence, and the exploration of space. Our mission is to: (1) Help ensure the scientific excellence and vitality of the major LLNL programs through its leadership role in performing basic and applied multidisciplinary research and development with programmatic impact, and by recruiting and retaining science and technology leaders; (2) Create future opportunities and directions for LLNL and its major programs by growing new program areas and cutting-edge capabilities that are synergistic with, and supportive of, its national security mission; (3) Provide a direct conduit to the academic and high-tech industrial sectors for LLNL and its national security programs, through which the Laboratory gains access to frontier science and technology, and can impact the science and technology communities; (4) Leverage unique Laboratory capabilities, to advance the state universe. This inaugural PAT Annual Report begins a series that will chronicle our progress towards fulfilling this mission. I believe the report demonstrates that the PAT Directorate has a strong base of capabilities and accomplishments on which to build in meeting its goals. Some of the highlights

  11. Sustainable Energy Technologies annual report 2003

    International Nuclear Information System (INIS)

    Calgary based Sustainable Energy Technologies is a public company that develops and manufactures alternative energy products that enable distributed renewable energy resources to be integrated with the existing electrical infrastructure. The company has moved from a development stage company to one that manufactures power electronic products that can compete globally and which will play an important role in the transition to a cleaner world. Achievements in the past year have included a joint effort with RWE Piller GmbH to develop a power electronics platform for a fuel cell inverter. Ten inverters were delivered to Nuvera Fuel Cells and were reported to have performed very well in the Avanti distributed generation fuel cell. The universality of the inverter was demonstrated when the same power electronics platform was used to support a 5 kW grid interactive converter for the solar power market. During the 18-month period ending on March 31, 2003, the company invested $1.5 million to create their first two commercial product lines, without net investment of shareholder equity. The objective for the future is to generate cash flow and earnings from sales into the solar power market and to build a leadership role in the stationary fuel cell industry. The major challenge will lie in product support and customer service. As the customer base expands, the company will invest in product-tracking software. This annual report includes an auditor's report, consolidated financial statements including balance sheets, statements of income and deficit, statements of cash flows, and notes to the consolidated financial statements. tabs

  12. Physics of the Cosmos Program Annual Technology Report

    Science.gov (United States)

    Pham, Bruce Thai; Cardiff, Ann H.

    2015-01-01

    What's in this Report? What's New? This fifth Program Annual Technology Report (PATR) summarizes the Programs technology development activities for fiscal year (FY) 2015. The PATR serves four purposes.1. Summarize the technology gaps identified by the astrophysics community;2. Present the results of this years technology gap prioritization by the PCOS Technology Management Board (TMB);3. Report on newly funded PCOS Strategic Astrophysics Technology (SAT) projects; and4. Detail progress, current status, and activities planned for the coming year for all technologies supported by PCOS Supporting Research and Technology (SRT) funding in FY 2015. .

  13. Annual Report of Institute of Nuclear Chemistry and Technology 2002

    International Nuclear Information System (INIS)

    The INCT 2002 Annual Report is the review of scientific activities in all branches being developed in the Institute of Nuclear Chemistry and Technology, Warsaw. The studies are connected in general with the following fields: radiation chemistry and physics, radiation technologies, radiochemistry, stable isotopes, nuclear analytical methods, chemistry in general, radiobiology, process engineering, material engineering, structural studies and diagnostics, nucleonic control systems and accelerators

  14. FY2014 Fuel & Lubricant Technologies Annual Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Stork, Kevin [Office of Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States)

    2016-02-01

    Annual progress report for Fuel & Lubricant Technologies. The Fuel & Lubricant Technologies Program supports fuels and lubricants research and development (R&D) to provide vehicle manufacturers and users with cost-competitive options that enable high fuel economy with low emissions, and contribute to petroleum displacement.

  15. 1997 Annual report. Technological Research Direction

    International Nuclear Information System (INIS)

    This document describes the results for one year of work. Here is presented the goals of the Technological Research Direction of the National Institute of Nuclear Research in Mexico, which is promoting and developing the production of high technologies in the nuclear sciences and related disciplines as well as to generate the technologies, products, quality insume for academic organizations, health, industrial and commercial that are required. (Author)

  16. International Technology Exchange Division: 1993 Annual report

    International Nuclear Information System (INIS)

    The Office of Technology Development (OTD) was established to ensure that reliable and acceptable technologies are available for implementation at DOE sites and that a technically trained work force is available to complete the EM mission by 2019. OTD established the International Technology Exchange Staff (ITES) to identify, evaluate, and acquire international technologies which can accelerate US DOE cleanup operations. ITES's goal is to pursue international collaboration among government organizations, educational institutions, and private industry to identify world-wide needs and available technologies that will meet US environmental needs in general, and EM cleanup needs in particular; and establish mechanisms by which US government ER/WM technologies will be transferred to the US private sector for commercialization and export to international markets. ITES has developed the following strategic objectives to implement its international goals: develop and implement EM's policy for international programs in accordance with DOE and US Government policies and regulations; establish efficient and predictable international technology transfer mechanisms; assist the US private sector in the commercialization and deployment of federally funded EM technologies and related knowledge in international markets; leverage US and non-US resources to accelerate international development and regulatory acceptance of EM technologies; contribute to the improvement of EM's training of US students, scientists, and managers on international environmental issues. A summary and descriptions of program activities and accomplishments are given for 17 programs which comprise the four main areas of the ITES program: Activities with the Former Soviet Union, International Technology Transfer, International Cooperation, and Information Systems and Publications. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database

  17. Accelerator Technology Division annual report, FY 1989

    Energy Technology Data Exchange (ETDEWEB)

    1990-06-01

    This paper discusses: accelerator physics and special projects; experiments and injectors; magnetic optics and beam diagnostics; accelerator design and engineering; radio-frequency technology; accelerator theory and simulation; free-electron laser technology; accelerator controls and automation; and high power microwave sources and effects.

  18. Accelerator Technology Division annual report, FY 1989

    International Nuclear Information System (INIS)

    This paper discusses: accelerator physics and special projects; experiments and injectors; magnetic optics and beam diagnostics; accelerator design and engineering; radio-frequency technology; accelerator theory and simulation; free-electron laser technology; accelerator controls and automation; and high power microwave sources and effects

  19. Hazards Control Department annual technology review, 1987

    Energy Technology Data Exchange (ETDEWEB)

    Griffith, R.V.; Anderson, K.J. (eds.)

    1988-07-01

    This document describes some of the research performed in the LLNL Hazards Control Department from October 1986 to September 1987. The sections in the Annual report cover scientific concerns in the areas of Health Physics, Industrial Hygiene, Industrial Safety, Aerosol Science, Resource Management, Dosimetry and Radiation Physics, Criticality Safety, and Fire Science. For a broader overview of the types of work performed in the Hazards Control Department, we have also compiled a selection of abstracts of recent publications by Hazards Control employees. Individual reports are processed separately for the data base.

  20. 2012 DOE Vehicle Technologies Program Annual Merit Review

    Energy Technology Data Exchange (ETDEWEB)

    None

    2012-10-26

    The 2012 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting was held May 14-18, 2012 in Crystal City, Virginia. The review encompassed all of the work done by the Hydrogen Program and the Vehicle Technologies Program: a total of 309 individual activities were reviewed for Vehicle Technologies, by a total of 189 reviewers. A total of 1,473 individual review responses were received for the technical reviews.

  1. 2013 Geothermal Technologies Office Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2014-02-01

    For the Geothermal Technologies Office (GTO), 2013 was a year of major achievements and repositioning to introduce major initiatives. Read all about our progress and successes this year, and as we look ahead, our new opportunities and initiatives.

  2. Technology Transfer Annual Report Fiscal Year 2015

    Energy Technology Data Exchange (ETDEWEB)

    Skinner, Wendy Lee [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-12-01

    Idaho National Laboratory (INL) is a Department of Energy (DOE) multi-program national laboratory that conducts research and development in all DOE mission areas. Like all other federal laboratories, INL has a statutory, technology transfer mission to make its capabilities and technologies available to federal agencies, state and local governments, universities, and industry. To fulfill this mission, INL encourages its scientific, engineering, and technical staff to disclose new inventions and creations to ensure the resulting intellectual property is captured, protected, and available to others who might benefit from it. As part of the mission, intellectual property is licensed to industrial partners for commercialization, job creation, and delivering the benefits of federally funded technology to consumers. In some cases, unique capabilities are made available to other federal agencies, international organizations, domestic and foreign commercial entities, or small businesses to solve specific technical challenges. INL employees work cooperatively with researchers and technical staff from the university and industrial sectors to further development of emerging technologies. In this multinational global economy, INL is contributing to the development of the next generation of engineers and scientists by licensing software to educational institutions throughout the world. This report is a catalog of select INL technology transfer and commercialization transactions and research agreements that were executed during this past year. The size and diversity of INL technical resources, coupled with the large number of relationships with other organizations, virtually ensures that a report of this nature will fail to capture all interactions. Recognizing this limitation, this report focuses on transactions that are specifically authorized by technology transfer legislation (and corresponding contractual provisions) or involve the transfer of legal rights to technology to

  3. Technology Deployment Annual Report 2013 December

    Energy Technology Data Exchange (ETDEWEB)

    N/A

    2014-01-01

    Idaho National Laboratory (INL) is a Department of Energy (DOE) multi-program national laboratory that conducts research and development in all DOE mission areas. Like all other federal laboratories, INL has a statutory technology transfer mission to make its capabilities and technologies available to all federal agencies, to state and local governments, and to universities and industry. To fulfill this mission, INL encourages its scientific, engineering, and technical staff to disclose new inventions and creations to ensure the resulting intellectual property is captured, protected, and made available to others who might benefit from it. As part of the mission, intellectual property is licensed to industrial partners for commercialization, creating jobs and delivering the benefits of federally funded technology to consumers. In other cases, unique capabilities are made available to other federal agencies or to regional small businesses to solve specific technical challenges. INL employees also work cooperatively with researchers and technical staff from the university and industrial sectors to further develop emerging technologies. In a multinational global economy, INL is contributing to the development of the next generation of engineers and scientists by licensing software to educational institutions throughout the world. This report is a catalog of selected INL technology transfer and commercialization transactions during this past year. The size and diversity of INL technical resources, coupled with the large number of relationships with other organizations, virtually ensures that a report of this nature will fail to capture all interactions. Recognizing this limitation, this report focuses on transactions that are specifically authorized by technology transfer legislation (and corresponding contractual provisions) or involve the transfer of legal rights to technology to other parties. This report was compiled from primary records, which were readily

  4. 2014 Annual Report, Geothermal Technologies Office

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2015-03-01

    In 2014, the Geothermal Technologies Office (GTO) made significant gains—increased budgets, new projects, key technology successes, and new staff. The Fiscal Year (FY) 2015 budget is at $55 million—roughly a 20% increase over FY 2014, and a strong vote of confidence in what the sector is doing to advance economically competitive renewable energy. GTO also remains committed to a balanced portfolio, which includes new hydrothermal development, EGS, and targeted opportunities in the low-temperature sector.

  5. Technology Transfer and Commercialization Annual Report 2008

    Energy Technology Data Exchange (ETDEWEB)

    Michelle R. Blacker

    2008-12-01

    The Idaho National Laboratory (INL) is a Department of Energy (DOE) multi-program national laboratory that conducts research and development in all DOE mission areas. Like all other federal laboratories, INL has a statutory, technology transfer mission to make its capabilities and technologies available to all federal agencies, to state and local governments, and to universities and industry. To fulfill this mission, INL encourages its scientific, engineering, and technical staff to disclose new inventions and creations to ensure the resulting intellectual property is captured, protected, and made available to others who might benefit from it. As part of the mission, intellectual property is licensed to industrial partners for commercialization, creating jobs and delivering the benefits of federally funded technology to consumers. In other cases, unique capabilities are made available to other federal agencies or to regional small businesses to solve specific technical challenges. In other interactions, INL employees work cooperatively with researchers and other technical staff of our partners to further develop emerging technologies. This report is a catalog of selected INL technology transfer and commercialization transactions during this past year. The size and diversity of INL technical resources, coupled with the large number of relationships with other organizations, virtually ensures that a report of this nature will fail to capture all interactions. Recognizing this limitation, this report focuses on transactions that are specifically authorized by technology transfer legislation (and corresponding contractual provisions) or involve the transfer of legal rights to technology to other parties. This report was compiled from primary records, which were readily available to the INL’s Office of Technology Transfer & Commercialization. The accomplishments cataloged in the report, however, reflect the achievements and creativity of the highly skilled researchers

  6. Technology Deployment Annual Report 2014 December

    Energy Technology Data Exchange (ETDEWEB)

    Arterburn, George K. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-12-01

    This report is a summary of key Technology Deployment activities and achievements for 2014, including intellectual property, granted copyrights, royalties, license agreements, CRADAs, WFOs and Technology-Based Economic Development. Idaho National Laboratory (INL) is a Department of Energy (DOE) multi-program national laboratory that conducts research and development in all DOE mission areas. Like all other federal laboratories, INL has a statutory, technology transfer mission to make its capabilities and technologies available to all federal agencies, to state and local governments, and to universities and industry. To fulfill this mission, INL encourages its scientific, engineering, and technical staff to disclose new inventions and creations to ensure the resulting intellectual property is captured, protected, and made available to others who might benefit from it. As part of the mission, intellectual property is licensed to industrial partners for commercialization, creating jobs and delivering the benefits of federally funded technology to consumers. In other cases, unique capabilities are made available to other federal agencies or to regional small businesses to solve specific technical challenges. INL employees also work cooperatively with researchers and technical staff from the university and industrial sectors to further develop emerging technologies. In our multinational global economy, INL is contributing to the development of the next generation of engineers and scientists by licensing software to educational instiutitons throughout the world. This report is a catalog of selected INL technology transfer and commercialization transactions during this past year. The size and diversity of INL technical resources, coupled with the large number of relationships with other organizations, virtually ensures that a report of this nature will fail to capture all interactions. Recognizing this limitation, this report focuses on transactions that are specifically

  7. Chemical Technology Division annual technical report 1989

    International Nuclear Information System (INIS)

    Highlights of the Chemical Technology (CMT) Division's activities during 1989 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including high-performance batteries (mainly lithium/iron sulfide and sodium/metal chloride), aqueous batteries (lead-acid and nickel/iron), and advanced fuel cells with molten carbonate and solid oxide electrolytes: (2) coal utilization, including the heat and seed recovery technology for coal-fired magnetohydrodynamics plants and the technology for fluidized-bed combustion; (3) methods for recovery of energy from municipal waste and techniques for treatment of hazardous organic waste; (4) nuclear technology related to a process for separating and recovering transuranic elements from nuclear waste and for producing 99Mo from low-enriched uranium targets, the recovery processes for discharged fuel and the uranium blanket in a sodium-cooled fast reactor (the Integral Fast Reactor), and waste management; and (5) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of fluid catalysis for converting small molecules to desired products; materials chemistry for superconducting oxides and associated and ordered solutions at high temperatures; interfacial processes of importance to corrosion science, high-temperature superconductivity, and catalysis; and the geochemical processes responsible for trace-element migration within the earth's crust. The Division continued to be administratively responsible for and the major user of the Analytical Chemistry Laboratory at Argonne National Laboratory (ANL)

  8. Chemical Technology Division. Annual technical report, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Laidler, J.J.; Myles, K.M.; Green, D.W.; McPheeters, C.C.

    1996-06-01

    Highlights of the Chemical Technology (CMT) Division`s activities during 1995 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) methods for treatment of hazardous waste and mixed hazardous/radioactive waste; (3) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (4) processes for separating and recovering selected elements from waste streams, concentrating low-level radioactive waste streams with advanced evaporator technology, and producing {sup 99}Mo from low-enriched uranium; (5) electrometallurgical treatment of different types of spent nuclear fuel in storage at Department of Energy sites; and (6) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems.

  9. Chemical Technology Division. Annual technical report, 1995

    International Nuclear Information System (INIS)

    Highlights of the Chemical Technology (CMT) Division's activities during 1995 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) methods for treatment of hazardous waste and mixed hazardous/radioactive waste; (3) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (4) processes for separating and recovering selected elements from waste streams, concentrating low-level radioactive waste streams with advanced evaporator technology, and producing 99Mo from low-enriched uranium; (5) electrometallurgical treatment of different types of spent nuclear fuel in storage at Department of Energy sites; and (6) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems

  10. Biological and chemical technologies research. FY 1995 annual summary report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1996-03-01

    The annual summary report presents the fiscal year (FY) 1995 research activities and accomplishments for the United States Department of Energy (DOE) Biological and Chemical Technologies Research (BCTR) Program. This BCTR program resides within the Office of Industrial Technologies (OIT) of the Office of Energy Efficiency and Renewable Energy (EE). The annual summary report for 1995 (ASR 95) contains the following: program description (including BCTR program mission statement, historical background, relevance, goals and objectives); program structure and organization, selected technical and programmatic highlights for 1995; detailed descriptions of individual projects; a listing of program output, including a bibliography of published work; patents; and awards arising from work supported by the BCTR.

  11. 2015 Annual Report - Geothermal Technologies Office

    Energy Technology Data Exchange (ETDEWEB)

    None

    2016-04-01

    Over the past year, the U.S. Department of Energy’s (DOE’s) Geothermal Technologies Office (GTO) supported a number of exciting initiatives and research and development (R&D)activities! The GTO budget was increased in Fiscal Years (FY) 2015-2016, providing the opportunity to invest in new technologies and initiatives, such as the DOE-wide Subsurface Crosscut Initiative, and the Small Business Vouchers (SBV)Program, which is focused on growing our small business and national laboratory partnerships. These efforts will continue to advance geothermal as an economically competitive renewable energy.

  12. Accelerator Technology Division annual report, FY 1991

    International Nuclear Information System (INIS)

    This report discusses the following programs: The Ground Test Accelerator Program; APLE Free-Electron Laser Program; Accelerator Transmutation of Waste; JAERI, OMEGA Project, and Intense Neutron Source for Materials Testing; Advanced Free-Electron Laser Initiative; Superconducting Super Collider; The High-Power Microwave Program; Φ Factory Collaboration; Neutral Particle Beam Power System Highlights; Accelerator Physics and Special Projects; Magnetic Optics and Beam Diagnostics; Accelerator Design and Engineering; Radio-Frequency Technology; Free-Electron Laser Technology; Accelerator Controls and Automation; Very High-Power Microwave Sources and Effects; and GTA Installation, Commissioning, and Operations

  13. Second annual clean coal technology conference: Proceedings

    International Nuclear Information System (INIS)

    This report contains paper on the following topics: coal combustion/coal processing; advanced electric power generation systems; combined nitrogen oxide/sulfur dioxide control technologies; and emerging clean coal issues and environmental concerns. These paper have been cataloged separately elsewhere

  14. Chemical Technology Division annual technical report, 1994

    International Nuclear Information System (INIS)

    Highlights of the Chemical Technology (CMT) Division's activities during 1994 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for fluidized-bed combustion; (3) methods for treatment of hazardous waste and mixed hazardous/radioactive waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (5) processes for separating and recovering transuranic elements from waste streams, concentrating radioactive waste streams with advanced evaporator technology, and producing 99Mo from low-enriched uranium for medical applications; (6) electrometallurgical treatment of the many different types of spent nuclear fuel in storage at Department of Energy sites; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources and novel ceramic precursors; materials chemistry of superconducting oxides, electrified metal/solution interfaces, molecular sieve structures, and impurities in scrap copper and steel; and the geochemical processes involved in mineral/fluid interfaces and water-rock interactions occurring in active hydrothermal systems. In addition, the Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the technical programs at Argonne National Laboratory (ANL)

  15. Chemical Technology Division, Annual technical report, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1991 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for fluidized-bed combustion and coal-fired magnetohydrodynamics; (3) methods for treatment of hazardous and mixed hazardous/radioactive waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (5) processes for separating and recovering transuranic elements from nuclear waste streams; (6) recovery processes for discharged fuel and the uranium blanket in the Integral Fast Reactor (IFR); (7) processes for removal of actinides in spent fuel from commercial water-cooled nuclear reactors and burnup in IFRs; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources; chemistry of superconducting oxides and other materials of interest with technological application; interfacial processes of importance to corrosion science, catalysis, and high-temperature superconductivity; and the geochemical processes involved in water-rock interactions occurring in active hydrothermal systems. In addition, the Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the technical programs at Argonne National Laboratory (ANL).

  16. Chemical Technology Division, Annual technical report, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    Highlights of the Chemical Technology (CMT) Division`s activities during 1991 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for fluidized-bed combustion and coal-fired magnetohydrodynamics; (3) methods for treatment of hazardous and mixed hazardous/radioactive waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (5) processes for separating and recovering transuranic elements from nuclear waste streams; (6) recovery processes for discharged fuel and the uranium blanket in the Integral Fast Reactor (IFR); (7) processes for removal of actinides in spent fuel from commercial water-cooled nuclear reactors and burnup in IFRs; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources; chemistry of superconducting oxides and other materials of interest with technological application; interfacial processes of importance to corrosion science, catalysis, and high-temperature superconductivity; and the geochemical processes involved in water-rock interactions occurring in active hydrothermal systems. In addition, the Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the technical programs at Argonne National Laboratory (ANL).

  17. Chemical Technology Division annual technical report, 1985

    International Nuclear Information System (INIS)

    Highlights of the Chemical Technology (CMT) Division's activities during 1985 are presented. In this period, CMT conducted research and development in areas that include the following: (1) advanced batteries - mainly lithium-alloy/metal sulfide and sodium/sulfur; (2) advanced fuel cells with molten carbonate or solid oxide electrolytes; (3) corrosion-protective coatings for high-strength steel; (4) coal utilization, including the heat and seed recovery technology for coal-fired magnetohydrodynamics plants and the technology for fluidized-bed combustion; (5) methodologies for recovery of energy from municipal waste; (6) nuclear technology related to waste management, the recovery processes for discharged fuel and the uranium blanket in a sodium-cooled fast reactor, and proof of breeding in a light water breeder reactor; and (7) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of catalytic hydrogenation and catalytic oxidation; materials chemistry for associated and ordered solutions at high temperatures; interfacial processes of importance to corrosion science, surface science, and catalysis; the thermochemistry of zeolites and related silicates; and the geochemical processes responsible for trace-element migration within the earth's crust. The Division continued to be the major user of the technical support provided by the Analytical Chemistry Laboratory at ANL

  18. Chemical Technology Division, Annual technical report, 1991

    International Nuclear Information System (INIS)

    Highlights of the Chemical Technology (CMT) Division's activities during 1991 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for fluidized-bed combustion and coal-fired magnetohydrodynamics; (3) methods for treatment of hazardous and mixed hazardous/radioactive waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (5) processes for separating and recovering transuranic elements from nuclear waste streams; (6) recovery processes for discharged fuel and the uranium blanket in the Integral Fast Reactor (IFR); (7) processes for removal of actinides in spent fuel from commercial water-cooled nuclear reactors and burnup in IFRs; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources; chemistry of superconducting oxides and other materials of interest with technological application; interfacial processes of importance to corrosion science, catalysis, and high-temperature superconductivity; and the geochemical processes involved in water-rock interactions occurring in active hydrothermal systems. In addition, the Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the technical programs at Argonne National Laboratory (ANL)

  19. Chemical Technology Division annual technical report, 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    Highlights of the Chemical Technology (CMT) Division`s activities during 1994 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for fluidized-bed combustion; (3) methods for treatment of hazardous waste and mixed hazardous/radioactive waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (5) processes for separating and recovering transuranic elements from waste streams, concentrating radioactive waste streams with advanced evaporator technology, and producing {sup 99}Mo from low-enriched uranium for medical applications; (6) electrometallurgical treatment of the many different types of spent nuclear fuel in storage at Department of Energy sites; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources and novel ceramic precursors; materials chemistry of superconducting oxides, electrified metal/solution interfaces, molecular sieve structures, and impurities in scrap copper and steel; and the geochemical processes involved in mineral/fluid interfaces and water-rock interactions occurring in active hydrothermal systems. In addition, the Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the technical programs at Argonne National Laboratory (ANL).

  20. Chemical Technology Division annual technical report 1989

    Energy Technology Data Exchange (ETDEWEB)

    1990-03-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1989 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including high-performance batteries (mainly lithium/iron sulfide and sodium/metal chloride), aqueous batteries (lead-acid and nickel/iron), and advanced fuel cells with molten carbonate and solid oxide electrolytes: (2) coal utilization, including the heat and seed recovery technology for coal-fired magnetohydrodynamics plants and the technology for fluidized-bed combustion; (3) methods for recovery of energy from municipal waste and techniques for treatment of hazardous organic waste; (4) nuclear technology related to a process for separating and recovering transuranic elements from nuclear waste and for producing {sup 99}Mo from low-enriched uranium targets, the recovery processes for discharged fuel and the uranium blanket in a sodium-cooled fast reactor (the Integral Fast Reactor), and waste management; and (5) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of fluid catalysis for converting small molecules to desired products; materials chemistry for superconducting oxides and associated and ordered solutions at high temperatures; interfacial processes of importance to corrosion science, high-temperature superconductivity, and catalysis; and the geochemical processes responsible for trace-element migration within the earth's crust. The Division continued to be administratively responsible for and the major user of the Analytical Chemistry Laboratory at Argonne National Laboratory (ANL).

  1. Chemical Technology Division annual technical report 1997

    International Nuclear Information System (INIS)

    The Chemical Technology (CMT) Division is a diverse technical organization with principal emphases in environmental management and development of advanced energy sources. The Division conducts research and development in three general areas: (1) development of advanced power sources for stationary and transportation applications and for consumer electronics, (2) management of high-level and low-level nuclear wastes and hazardous wastes, and (3) electrometallurgical treatment of spent nuclear fuel. The Division also performs basic research in catalytic chemistry involving molecular energy resources, mechanisms of ion transport in lithium battery electrolytes, and the chemistry of technology-relevant materials and electrified interfaces. In addition, the Division operates the Analytical Chemistry Laboratory, which conducts research in analytical chemistry and provides analytical services for programs at Argonne National Laboratory (ANL) and other organizations. Technical highlights of the Division's activities during 1997 are presented

  2. Chemical Technology Division annual technical report 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-06-01

    The Chemical Technology (CMT) Division is a diverse technical organization with principal emphases in environmental management and development of advanced energy sources. The Division conducts research and development in three general areas: (1) development of advanced power sources for stationary and transportation applications and for consumer electronics, (2) management of high-level and low-level nuclear wastes and hazardous wastes, and (3) electrometallurgical treatment of spent nuclear fuel. The Division also performs basic research in catalytic chemistry involving molecular energy resources, mechanisms of ion transport in lithium battery electrolytes, and the chemistry of technology-relevant materials and electrified interfaces. In addition, the Division operates the Analytical Chemistry Laboratory, which conducts research in analytical chemistry and provides analytical services for programs at Argonne National Laboratory (ANL) and other organizations. Technical highlights of the Division`s activities during 1997 are presented.

  3. 1998 Chemical Technology Division Annual Technical Report.

    Energy Technology Data Exchange (ETDEWEB)

    Ackerman, J.P.; Einziger, R.E.; Gay, E.C.; Green, D.W.; Miller, J.F.

    1999-08-06

    The Chemical Technology (CMT) Division is a diverse technical organization with principal emphases in environmental management and development of advanced energy sources. The Division conducts research and development in three general areas: (1) development of advanced power sources for stationary and transportation applications and for consumer electronics, (2) management of high-level and low-level nuclear wastes and hazardous wastes, and (3) electrometallurgical treatment of spent nuclear fuel. The Division also performs basic research in catalytic chemistry involving molecular energy resources, mechanisms of ion transport in lithium battery electrolytes, and the chemistry of technology-relevant materials. In addition, the Division operates the Analytical Chemistry Laboratory, which conducts research in analytical chemistry and provides analytical services for programs at Argonne National Laboratory (ANL) and other organizations. Technical highlights of the Division's activities during 1998 are presented.

  4. Chemical technology division: Annual technical report 1987

    Energy Technology Data Exchange (ETDEWEB)

    1988-05-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1987 are presented. In this period, CMT conducted research and development in the following areas: (1) high-performance batteries--mainly lithium-alloy/metal sulfide and sodium/sulfur; (2) aqueous batteries (lead-acid, nickel/iron, etc.); (3) advanced fuel cells with molten carbonate or solid oxide electrolytes; (4) coal utilization, including the heat and seed recovery technology for coal-fired magnetohydrodynamics plants and the technology for fluidized-bed combustion; (5) methods for the electromagnetic continuous casting of steel sheet and for the purification of ferrous scrap; (6) methods for recovery of energy from municipal waste and techniques for treatment of hazardous organic waste; (7) nuclear technology related to a process for separating and recovering transuranic elements from nuclear waste, the recovery processes for discharged fuel and the uranium blanket in a sodium-cooled fast reactor, and waste management; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of fluid catalysis for converting small molecules to desired products; materials chemistry for liquids and vapors at high temperatures; interfacial processes of importance to corrosion science, high-temperature superconductivity, and catalysis; the thermochemistry of various minerals; and the geochemical processes responsible for trace-element migration within the earth's crust. The Division continued to be the major user of the technical support provided by the Analytical Chemistry Laboratory at ANL. 54 figs., 9 tabs.

  5. Chemical Technology Division annual technical report, 1988

    International Nuclear Information System (INIS)

    Highlights of the Chemical Technology (CMT) Divisions's activities during 1988 are presented. In this period, CMT conducted research and development in the following areas: (1) high-performance batteries (mainly lithium-alloy/metal sulfide, sodium/metal chloride, and sodium/sulfur); (2) aqueous batteries (lead-acid, nickel/iron, etc.); (3) advanced fuel cells with molten carbonate or solid oxide electrolytes; (4) coal utilization, including the heat and seed recovery technology for coal-fired magnetohydrodynamics plants and the technology for fluidized-bed combustion; (5) methods for recovery of energy from municipal waste and techniques for treatment of hazardous chemical water; (6) nuclear technology related to a process for separating and recovering transuranic elements from nuclear waste and for producing /sup 99/Mo from low-enriched uranium targets, the recovery processes for discharged fuel and the uranium blanket in a sodium-cooled fast reactor, and waste management; and (7) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of fluid catalysis for converting small molecules to desired products; materials chemistry for superconducting oxides and associated and ordered solutions at high temperatures; interfacial processes of importance to corrosion science, high-temperature superconductivity, and catalysis; and the geochemical processes responsible for trace-element migration within the earth's crust. The Division continued to be the major user of the technical support provided by the Analytical Chemistry Laboratory at ANL. 53 figs., 16 tabs

  6. Chemical Technology Division annual technical report, 1986

    Energy Technology Data Exchange (ETDEWEB)

    1987-06-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1986 are presented. In this period, CMT conducted research and development in areas that include the following: (1) high-performance batteries - mainly lithium-alloy/metal sulfide and sodium/sulfur; (2) aqueous batteries (lead-acid, nickel/iron, etc.); (3) advanced fuel cells with molten carbonate or solid oxide electrolytes; (4) coal utilization, including the heat and seed recovery technology for coal-fired magnetohydrodynamics plants, the technology for fluidized-bed combustion, and a novel concept for CO/sub 2/ recovery from fossil fuel combustion; (5) methods for recovery of energy from municipal waste; (6) methods for the electromagnetic continuous casting of steel sheet; (7) techniques for treatment of hazardous waste such as reactive metals and trichloroethylenes; (8) nuclear technology related to waste management, a process for separating and recovering transuranic elements from nuclear waste, and the recovery processes for discharged fuel and the uranium blanket in a sodium-cooled fast reactor; and (9) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of catalytic hydrogenation and catalytic oxidation; materials chemistry for associated and ordered solutions at high temperatures; interfacial processes of importance to corrosion science, surface science, and catalysis; the thermochemistry of zeolites and related silicates; and the geochemical processes responsible for trace-element migration within the earth's crust. The Division continued to be the major user of the technical support provided by the Analytical Chemistry Laboratory at ANL. 127 refs., 71 figs., 8 tabs.

  7. Chemical technology division: Annual technical report 1987

    International Nuclear Information System (INIS)

    Highlights of the Chemical Technology (CMT) Division's activities during 1987 are presented. In this period, CMT conducted research and development in the following areas: (1) high-performance batteries--mainly lithium-alloy/metal sulfide and sodium/sulfur; (2) aqueous batteries (lead-acid, nickel/iron, etc.); (3) advanced fuel cells with molten carbonate or solid oxide electrolytes; (4) coal utilization, including the heat and seed recovery technology for coal-fired magnetohydrodynamics plants and the technology for fluidized-bed combustion; (5) methods for the electromagnetic continuous casting of steel sheet and for the purification of ferrous scrap; (6) methods for recovery of energy from municipal waste and techniques for treatment of hazardous organic waste; (7) nuclear technology related to a process for separating and recovering transuranic elements from nuclear waste, the recovery processes for discharged fuel and the uranium blanket in a sodium-cooled fast reactor, and waste management; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of fluid catalysis for converting small molecules to desired products; materials chemistry for liquids and vapors at high temperatures; interfacial processes of importance to corrosion science, high-temperature superconductivity, and catalysis; the thermochemistry of various minerals; and the geochemical processes responsible for trace-element migration within the earth's crust. The Division continued to be the major user of the technical support provided by the Analytical Chemistry Laboratory at ANL. 54 figs., 9 tabs

  8. Chemical Technology Division annual technical report, 1986

    International Nuclear Information System (INIS)

    Highlights of the Chemical Technology (CMT) Division's activities during 1986 are presented. In this period, CMT conducted research and development in areas that include the following: (1) high-performance batteries - mainly lithium-alloy/metal sulfide and sodium/sulfur; (2) aqueous batteries (lead-acid, nickel/iron, etc.); (3) advanced fuel cells with molten carbonate or solid oxide electrolytes; (4) coal utilization, including the heat and seed recovery technology for coal-fired magnetohydrodynamics plants, the technology for fluidized-bed combustion, and a novel concept for CO2 recovery from fossil fuel combustion; (5) methods for recovery of energy from municipal waste; (6) methods for the electromagnetic continuous casting of steel sheet; (7) techniques for treatment of hazardous waste such as reactive metals and trichloroethylenes; (8) nuclear technology related to waste management, a process for separating and recovering transuranic elements from nuclear waste, and the recovery processes for discharged fuel and the uranium blanket in a sodium-cooled fast reactor; and (9) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of catalytic hydrogenation and catalytic oxidation; materials chemistry for associated and ordered solutions at high temperatures; interfacial processes of importance to corrosion science, surface science, and catalysis; the thermochemistry of zeolites and related silicates; and the geochemical processes responsible for trace-element migration within the earth's crust. The Division continued to be the major user of the technical support provided by the Analytical Chemistry Laboratory at ANL. 127 refs., 71 figs., 8 tabs

  9. Chemical Technology Division annual technical report, 2001

    International Nuclear Information System (INIS)

    The Chemical Technology Division (CMT) is one of eight engineering research divisions within Argonne National Laboratory, one of the U.S. government's oldest and largest research laboratories. The University of Chicago oversees the laboratory on behalf of the U.S. Department of Energy (DOE). Argonne's mission is to conduct basic scientific research, to operate national scientific facilities, to enhance the nation's energy resources, and to develop better ways to manage environmental problems. Argonne has the further responsibility of strengthening the nation's technology base by developing innovative technology and transferring it to industry. CMT is a diverse early-stage engineering organization, specializing in the treatment of spent nuclear fuel, development of advanced electrochemical power sources, and management of both high- and low-level nuclear wastes. Although this work is often indistinguishable from basic research, our efforts are directed toward the practical devices and processes that are covered by Argonne's mission. Additionally, the Division operates the Analytical Chemistry Laboratory and Environment, Safety, and Health Analytical Chemistry services, which provide a broad range of analytical services to Argonne and other organizations. The Division is multidisciplinary. Its people have formal training as ceramists; physicists; material scientists; electrical, mechanical, chemical, and nuclear engineers; and chemists. They have experience working in academia; urban planning; and the petroleum, aluminum, and automotive industries. Their skills include catalysis, ceramics, electrochemistry, metallurgy, nuclear magnetic resonance spectroscopy, and petroleum refining, as well as the development of nuclear waste forms, batteries, and high-temperature superconductors

  10. Chemical Technology Division annual technical report 1984

    International Nuclear Information System (INIS)

    In this period, CMT conducted research and development in the following areas: (1) advanced batteries - mainly lithium alloy/metal sulfide and sodium/sulfur for electric vehicles; (2) aqueous batteries - mainly improved lead-acid and nickel/iron for electric vehicles; (3) advanced fuel cells with molten carbonate or solid oxide electrolytes; (4) coal utilization, including the heat and seed recovery technology for coal-fired magnetohydrodynamic plants and the technology for pressurized fluidized-bed combustors; (5) methodologies for recovery of energy from municipal waste; (6) solid and liquid desiccants that allow moisture to be removed with a minium of energy; (7) nuclear technology related to waste management, proof of breeding for a light water reactor, and the recovery processes for discharged fuel and the uranium blanket in a sodium-cooled fast reactor; and (8) physical chemistry of selected materials in environments simulating those of fission, fusion, and other energy systems. The Division also has a program in basic chemistry research in the areas of fluid catalysis for converting abundant raw materials to desired products; materials chemistry of liquids and vapors at high temperatures; interfacial processes of importance to corrosion science, surface science, and catalysis; atmospheric chemistry, most notably SO2 oxidation mechanisms; and the thermochemistry of zeolites, related silicates, and inorganic compounds

  11. CSIR: Mining Technology annual review 1996/97

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    CSIR: Mining Technology works in close collaboration and strategic partnership with the mining industry, government institutions and employee organizations by acquiring, developing and transferring technologies to improve the safety and health of their employees, and to improve the profitability of the mining industry. The annual report describes achievements over the year in the areas of: rock engineering (including rockburst control, mine layout, stope and gully support, coal mining); environmental safety and health on topics such as occupational hygiene services, methane explosions, blasting techniques; and mining systems (orebody information, hydraulic transport mine mechanization, engineering design and automation, mine services). A list of Mining Technology`s 1996/97 publications is given.

  12. Chemical Technology Division annual technical report, 1990

    Energy Technology Data Exchange (ETDEWEB)

    1991-05-01

    Highlights of the Chemical Technology (CMT) Division's activities during 1990 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for coal- fired magnetohydrodynamics and fluidized-bed combustion; (3) methods for recovery of energy from municipal waste and techniques for treatment of hazardous organic waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for a high-level waste repository; (5) processes for separating and recovering transuranic elements from nuclear waste streams, concentrating plutonium solids in pyrochemical residues by aqueous biphase extraction, and treating natural and process waters contaminated by volatile organic compounds; (6) recovery processes for discharged fuel and the uranium blanket in the Integral Fast Reactor (IFR); (7) processes for removal of actinides in spent fuel from commercial water-cooled nuclear reactors and burnup in IFRs; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of fluid catalysis for converting small molecules to desired products; materials chemistry for superconducting oxides and associated and ordered solutions at high temperatures; interfacial processes of importance to corrosion science, high-temperature superconductivity, and catalysis; and the geochemical processes responsible for trace-element migration within the earth's crust. The Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the scientific and engineering programs at Argonne National Laboratory (ANL). 66 refs., 69 figs., 6 tabs.

  13. Chemical Technology Division annual technical report, 1990

    International Nuclear Information System (INIS)

    Highlights of the Chemical Technology (CMT) Division's activities during 1990 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for coal- fired magnetohydrodynamics and fluidized-bed combustion; (3) methods for recovery of energy from municipal waste and techniques for treatment of hazardous organic waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for a high-level waste repository; (5) processes for separating and recovering transuranic elements from nuclear waste streams, concentrating plutonium solids in pyrochemical residues by aqueous biphase extraction, and treating natural and process waters contaminated by volatile organic compounds; (6) recovery processes for discharged fuel and the uranium blanket in the Integral Fast Reactor (IFR); (7) processes for removal of actinides in spent fuel from commercial water-cooled nuclear reactors and burnup in IFRs; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of fluid catalysis for converting small molecules to desired products; materials chemistry for superconducting oxides and associated and ordered solutions at high temperatures; interfacial processes of importance to corrosion science, high-temperature superconductivity, and catalysis; and the geochemical processes responsible for trace-element migration within the earth's crust. The Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the scientific and engineering programs at Argonne National Laboratory (ANL). 66 refs., 69 figs., 6 tabs

  14. DOE Solar Energy Technologies Program: FY 2004 Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    2005-10-01

    The DOE Solar Energy Technologies Program FY 2004 Annual Report chronicles the R&D results of the U.S. Department of Energy Solar Energy Technologies Program for Fiscal Year 2004. In particular, the report describes R&D performed by the Program's national laboratories (National Renewable Energy Laboratory, Sandia National Laboratories, Oak Ridge National Laboratory, and Brookhaven National Laboratory) and university and industry partners.

  15. DOE Solar Energy Technologies Program FY 2006 Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    2007-07-01

    The DOE Solar Energy Technologies Program FY 2006 Annual Report chronicles the R&D results of the U.S. Department of Energy Solar Energy Technologies Program for Fiscal Year 2005. In particular, the report describes R&D performed by the Program's national laboratories (National Renewable Energy Laboratory, Sandia National Laboratories, Oak Ridge National Laboratory, and Brookhaven National Laboratory) and university and industry partners.

  16. Annual Report of Institute of Nuclear Chemistry and Technology 2001

    International Nuclear Information System (INIS)

    The INCT 2001 Annual Report is the review of scientific activities in all branches being developed in the Institute of Nuclear Chemistry and Technology in Warsaw. The studies are connected in general with the following fields: radiation chemistry and physics, radiation technologies, radiochemistry, stable isotopes, nuclear analytical methods, chemistry in general, radiobiology, process engineering, material engineering, structural studies and diagnostics, nucleonic control systems and accelerators and nuclear analytical methods

  17. Annual Report of Institute of Nuclear Chemistry and Technology 1999

    International Nuclear Information System (INIS)

    The INCT 1999 Annual Report is the review of scientific activities in all branches being developed in the Institute of Nuclear Chemistry and Technology, Warsaw. The studies are connected in general with the following fields: radiation chemistry and physics, radiation technologies, radiochemistry, stable isotopes, nuclear analytical methods, chemistry in general, radiobiology, process engineering, material engineering, structural studies and diagnostics and nucleonic control systems and accelerators

  18. Annual Report of Institute of Nuclear Chemistry and Technology 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-10-01

    The report is the collection of short communications being the review of the scientific activity of Institute of Nuclear Chemistry and Technology - Warsaw in 1997. The papers are gathered in several branches as follows: radiation chemistry and physics; radiochemistry, stable isotopes, nuclear analytical methods, chemistry in general; radiobiology; nuclear technologies and methods. The annual report of INCT-1997 contains also the general information about INCT as well as the full list of scientific papers being published by the staff in 1997

  19. DOE Solar Energy Technologies Program 2007 Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    2008-07-01

    The DOE Solar Energy Technologies Program FY 2007 Annual Report chronicles the R&D results of the U.S. Department of Energy Solar Energy Technologies Program from October 2006 to September 2007. In particular, the report describes R&D performed by the Program's national laboratories (National Renewable Energy Laboratory, Sandia National Laboratories, Oak Ridge National Laboratory, and Brookhaven National Laboratory) and university and industry partners.

  20. DOE Solar Energy Technologies Program FY 2005 Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    2006-03-01

    The DOE Solar Energy Technologies Program FY 2005 Annual Report chronicles the R&D results of the U.S. Department of Energy Solar Energy Technologies Program for Fiscal Year 2005. In particular, the report describes R&D performed by the Program?s national laboratories (National Renewable Energy Laboratory, Sandia National Laboratories, Oak Ridge National Laboratory, and Brookhaven National Laboratory) and university and industry partners.

  1. Annual Report 2004 of Institute of Nuclear Chemistry and Technology

    International Nuclear Information System (INIS)

    The INCT 2004 Annual Report is the review of scientific activities in all branches being developed in the Institute of Nuclear Chemistry and Technology Warsaw. The studies are connected in general with the following fields: radiation chemistry and physics, radiation technologies, radiochemistry, stable isotopes, nuclear analytical methods, chemistry in general, radiobiology, process engineering, material engineering, structural studies and diagnostics, nucleonic control systems and accelerators, radiobiology and nuclear analytical methods

  2. Annual Report of Institute of Nuclear Chemistry and Technology 1997

    International Nuclear Information System (INIS)

    The report is the collection of short communications being the review of the scientific activity of Institute of Nuclear Chemistry and Technology - Warsaw in 1997. The papers are gathered in several branches as follows: radiation chemistry and physics; radiochemistry, stable isotopes, nuclear analytical methods, chemistry in general; radiobiology; nuclear technologies and methods. The annual report of INCT-1997 contains also the general information about INCT as well as the full list of scientific papers being published by the staff in 1997

  3. Chemical Technology Division annual technical report, 2001

    International Nuclear Information System (INIS)

    The Chemical Technology Division (CMT) is one of eight engineering research divisions within Argonne National Laboratory, one of the U.S. government's oldest and largest research laboratories. The University of Chicago oversees the laboratory on behalf of the U.S. Department of Energy (DOE). Argonne's mission is to conduct basic scientific research, to operate national scientific facilities, to enhance the nation's energy resources, and to develop better ways to manage environmental problems. Argonne has the further responsibility of strengthening the nation's technology base by developing innovative technology and transferring it to industry. CMT is a diverse early-stage engineering organization, specializing in the treatment of spent nuclear fuel, development of advanced electrochemical power sources, and management of both high- and low-level nuclear wastes. Although this work is often indistinguishable from basic research, our efforts are directed toward the practical devices and processes that are covered by Argonne's mission. Additionally, the Division operates the Analytical Chemistry Laboratory and Environment, Safety, and Health Analytical Chemistry services, which provide a broad range of analytical services to Argonne and other organizations. The Division is multidisciplinary. Its people have formal training as ceramists; physicists; material scientists; electrical, mechanical, chemical, and nuclear engineers; and chemists. They have experience working in academia; urban planning; and the petroleum, aluminum, and automotive industries. Their skills include catalysis, ceramics, electrochemistry, metallurgy, nuclear magnetic resonance spectroscopy, and petroleum refining, as well as the development of nuclear waste forms, batteries, and high-temperature super-conductors. The Division's wide-ranging expertise finds ready application in solving energy and environmental problems. Division personnel are frequently called on by governmental and industrial

  4. 2009 DOE Vehicle Technologies Program Annual Merit Review

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2009-10-01

    Annual Merit Review and Peer Evaluation Meeting to review the FY2008 accomplishments and FY2009 plans for the Vehicle Technologies Program, and provide an opportunity for industry, government, and academic to give inputs to DOE on the Program with a structured and formal methodology.

  5. DOE Solar Energy Technologies Program FY 2005 Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    Sutula, Raymond A. [DOE Solar Energy Technologies Program, Washington, D.C. (United States)

    2006-03-01

    The DOE Solar Energy Technologies Program FY 2005 Annual Report chronicles the R&D results of the program for fiscal year 2005. In particular, the report describes R&D performed by the Program’s national laboratories and university and industry partners.

  6. Laser technologies for laser accelerators. Annual report

    International Nuclear Information System (INIS)

    The primary result of the work reported is the determination of laser system architectures that satsify the requirements of high luminosity, high energy (about 1 TeV), electron accelerators. It has been found that high laser efficiency is a very hard driver for these accelerators as the total average laser output optical power is likely to fall above 10 MW. The luminosity requires rep rates in the kHz range, and individual pulse lengths in the 1-10 psec range are required to satisfy acceleration gradient goals. CO2 and KrF lasers were chosen for study because of their potential to simultaneously satisfy the given requirements. Accelerator luminosity is reviewed, and requirements on laser system average power and rep rate are determined as a function of electron beam bunch parameters. Laser technologies are reviewed, including CO2, excimers, solid state, and free electron lasers. The proposed accelerator mechanisms are summarized briefly. Work on optical transport geometries for near and far field accelerators are presented. Possible exploitation of the CO2 and DrF laser technology to generate the required pulse lengths, rep rates, and projected efficiencies is illustrated and needed development work is suggested. Initial efforts at developing a 50 GeV benchmark conceptual design and a 100 MeV demonstration experiment conceptual design are presented

  7. Chemical Technology Division annual technical report, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Battles, J.E.; Myles, K.M.; Laidler, J.J.; Green, D.W.

    1993-06-01

    In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for fluidized-bed combustion and coal-fired magnetohydrodynamics; (3) methods for treatment of hazardous waste, mixed hazardous/radioactive waste, and municipal solid waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (5) processes for separating and recovering transuranic elements from nuclear waste streams, treating water contaminated with volatile organics, and concentrating radioactive waste streams; (6) recovery processes for discharged fuel and the uranium blanket in the Integral Fast Reactor (EFR); (7) processes for removal of actinides in spent fuel from commercial water-cooled nuclear reactors and burnup in IFRs; and (8) physical chemistry of selected materials (corium; Fe-U-Zr, tritium in LiAlO{sub 2} in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources and novel` ceramic precursors; materials chemistry of superconducting oxides, electrified metal/solution interfaces, and molecular sieve structures; and the geochemical processes involved in water-rock interactions occurring in active hydrothermal systems. In addition, the Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the technical programs at Argonne National Laboratory (ANL).

  8. Chemical Technology Division annual technical report, 1992

    International Nuclear Information System (INIS)

    In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for fluidized-bed combustion and coal-fired magnetohydrodynamics; (3) methods for treatment of hazardous waste, mixed hazardous/radioactive waste, and municipal solid waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (5) processes for separating and recovering transuranic elements from nuclear waste streams, treating water contaminated with volatile organics, and concentrating radioactive waste streams; (6) recovery processes for discharged fuel and the uranium blanket in the Integral Fast Reactor (EFR); (7) processes for removal of actinides in spent fuel from commercial water-cooled nuclear reactors and burnup in IFRs; and (8) physical chemistry of selected materials (corium; Fe-U-Zr, tritium in LiAlO2 in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources and novel' ceramic precursors; materials chemistry of superconducting oxides, electrified metal/solution interfaces, and molecular sieve structures; and the geochemical processes involved in water-rock interactions occurring in active hydrothermal systems. In addition, the Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the technical programs at Argonne National Laboratory (ANL)

  9. 1982 annual status report: thermonuclear fusion technology

    International Nuclear Information System (INIS)

    The objective of this programme is to study the technological problems related to ''Post Jet'' experimental machines and, in a longer range, to assess the engineering aspects of Fusion Power Reactor Plants. According to the decision taken by the Council of Ministers on the JRC multiannual programme (1980-1983), the work performed on 1982 concerns four projects, namely: The Project 1: ''Fusion Reactor Studies''concerns mainly the NET (Next European Torus) studies which have been continued in the framework of the European participation to INTOR (INternational TOkamak Reactor). This represents a collaborative effort to design a major fusion experiment beyond the-upcoming generation of large tokamaks. The Project 2: ''Blanket Technology'' has the aim to investigate the behaviour of blanket materials in fusion conditions. The Project 3: ''Materials Sorting and Development'' has the aim to assess the mechanical properties and radiation damage of standard and advanced materials suited for structures, in particular for application as first wall of the fusion reactors. The Project 4: ''Cyclotron Operation and Experiments''has the task to exploit a cyclotron to simulate radiation damages to materials in a fusion ambient

  10. Superconducting technology program Sandia 1996 annual report

    International Nuclear Information System (INIS)

    Sandia's Superconductivity Technology Program is a thallium-based high-temperature superconductor (HTS) research and development program consisting of efforts in powder synthesis and process development, open-system thick film conductor development, wire and tape fabrication, and HTS motor design. The objective of this work is to develop high-temperature superconducting conductors (wire and tape) capable of meeting requirements for high-power electrical devices of interest to industry. The research efforts currently underway are: (1) Process development and characterization of thallium-based high-temperature superconducting closed system wire and tape, (2) Investigation of the synthesis and processing of thallium-based thick films using two-zone processing, and (3) Cryogenic design of a 30K superconducting motor. This report outlines the research that has been performed during FY96 in each of these areas

  11. Physics and Advanced Technologies 2003 Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    Hazi, A; Sketchley, J

    2005-01-20

    The Physics and Advanced Technologies (PAT) Directorate overcame significant challenges in 2003 to deliver a wealth of scientific and programmatic milestones, and move toward closer alignment with programs at Lawrence Livermore National Laboratory. We acted aggressively in enabling the PAT Directorate to contribute to future, growing Lawrence Livermore missions in homeland security and at the National Ignition Facility (NIF). We made heavy investments to bring new capabilities to the Laboratory, to initiate collaborations with major Laboratory programs, and to align with future Laboratory directions. Consistent with our mission, we sought to ensure that Livermore programs have access to the best science and technology, today and tomorrow. For example, in a move aimed at revitalizing the Laboratory's expertise in nuclear and radiation detection, we brought the talented Measurement Sciences Group to Livermore from Lawrence Berkeley National Laboratory, after its mission there had diminished. The transfer to our I Division entailed significant investment by PAT in equipment and infrastructure required by the group. In addition, the move occurred at a time when homeland security funding was expected, but not yet available. By the end of the year, though, the group was making crucial contributions to the radiation detection program at Livermore, and nearly every member was fully engaged in programmatic activities. Our V Division made a move of a different sort, relocating en masse from Building 121 to the NIF complex. This move was designed to enhance interaction and collaboration among high-energy-density experimental scientists at the Laboratory, a goal that is essential to the effective use of NIF in the future. Since then, V Division has become increasingly integrated with NIF activities. Division scientists are heavily involved in diagnostic development and fielding and are poised to perform equation-of-state and high-temperature hohlraum experiments in 2004

  12. Manchester Spring Chinook Broodstock Project : Progress Report, 2000.

    Energy Technology Data Exchange (ETDEWEB)

    McAuley, W. Carlin; Wastel, Michael R.; Flagg, Thomas A. (Thomas Alvin)

    2000-11-01

    In spring 1995 the Idaho Department of Fish and Game (IDFG) and the Oregon Department of Fish and Wildlife (ODFW) initiated captive broodstocks as part of conservation efforts for ESA-listed stocks of Snake River spring/summer chinook salmon (Oncorhynchus tshawytscha). The need for this captive broodstock strategy was identified as critical in the National Marine Fisheries Service (NMFS) Proposed Recovery Plan for Snake River Salmon. These captive broodstock programs are being coordinated by the Bonneville Power Administration (BPA) through the Chinook Salmon Captive Propagation Technical Oversight Committee (CSCPTOC). Oregon's Snake River spring/summer chinook salmon captive broodstock program currently focuses on three stocks captured as juveniles from the Grande Ronde River Basin: the upper Grande Ronde River, Catherine Creek, and the Lostine River. Idaho's Snake River program includes three stocks captured as eggs and juveniles from the Salmon River Basin: the Lemhi River, East Fork Salmon River, and West Fork Yankee Fork. The majority of captive fish from each stock of the Grande Ronde Basin will be grown to maturity in freshwater at the ODFW Bonneville Hatchery. A minority of the Salmon River Basin stocks will be grown to maturity in freshwater at the IDFG Eagle Hatchery. However, the IDFG and ODFW requested that a portion of each group also be reared in protective culture in seawater. In August 1996, NMFS began a BPA funded project (Project 96-067-00) to rear Snake River spring/summer chinook salmon captive broodstocks in seawater at the NMFS Manchester Research Station. During 1997-1999, facilities modifications were undertaken at Manchester to provide secure facilities for rearing of these ESA-listed fish. This included construction of a building housing a total of twenty 6.1-m diameter fiberglass rearing tanks, upgrade of the Manchester salt water pumping and filtration/sterilization systems to a total capacity of 5,670 L/min (1,500 gpm), and

  13. Institute for Energy Technology -Annual report 1996

    International Nuclear Information System (INIS)

    Research at Institutt for energiteknikk (IFE) comprises both nuclear and non-nuclear activities. The main nuclear program is centered on the OECD Halden Reactor Project. 19 participating countries and about 100 organisations is involved in the project. The Project is operated by a staff of 280 persons. In the autumn of 1996 the participating organizations reached agreement to continue their research collaboration for a further 3-year period (1997 to 1999). An extensive experimental program was carried out in 1996 using the Halden reactor (HBWR), partly for the joint international program, and partly for contract work for member countries. The main aim of this work is to improve the safety and reliability of existing nuclear power plants. The experimental equipment in the Halden reactor makes it ideal for simulating various operating conditions in different types of rectors. Processes such as corrosion in fuel cladding materials and fracture propagation in irradiated materials under the influence of additives in the coolant water can be studied. In an on-going study, fuel of Russian origin is being compared with modern western fuel. The results, being the first of their kind that are openly available, form an important bases for safety assessments of Russian VVER reactors. The man-machine laboratory is used to study how new technologies influence the operator and to develop computer based systems for improving the safety and accessibility of complex processes

  14. Chemical Technology Division annual technical report, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Battles, J.E.; Myles, K.M.; Laidler, J.J.; Green, D.W.

    1994-04-01

    Chemical Technology (CMT) Division this period, conducted research and development in the following areas: advanced batteries and fuel cells; fluidized-bed combustion and coal-fired magnetohydrodynamics; treatment of hazardous waste and mixed hazardous/radioactive waste; reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; separating and recovering transuranic elements, concentrating radioactive waste streams with advanced evaporators, and producing {sup 99}Mo from low-enriched uranium; recovering actinide from IFR core and blanket fuel in removing fission products from recycled fuel, and disposing removal of actinides in spent fuel from commercial water-cooled nuclear reactors; and physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources and novel ceramic precursors; materials chemistry of superconducting oxides, electrified metal/solution interfaces, molecular sieve structures, thin-film diamond surfaces, effluents from wood combustion, and molten silicates; and the geochemical processes involved in water-rock interactions. The Analytical Chemistry Laboratory in CMT also provides a broad range of analytical chemistry support.

  15. Institute for Energy Technology -Annual report 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    Research at Institutt for energiteknikk (IFE) comprises both nuclear and non-nuclear activities. The main nuclear program is centered on the OECD Halden Reactor Project. 19 participating countries and about 100 organisations is involved in the project. The Project is operated by a staff of 280 persons. In the autumn of 1996 the participating organizations reached agreement to continue their research collaboration for a further 3-year period (1997 to 1999). An extensive experimental program was carried out in 1996 using the Halden reactor (HBWR), partly for the joint international program, and partly for contract work for member countries. The main aim of this work is to improve the safety and reliability of existing nuclear power plants. The experimental equipment in the Halden reactor makes it ideal for simulating various operating conditions in different types of rectors. Processes such as corrosion in fuel cladding materials and fracture propagation in irradiated materials under the influence of additives in the coolant water can be studied. In an on-going study, fuel of Russian origin is being compared with modern western fuel. The results, being the first of their kind that are openly available, form an important bases for safety assessments of Russian VVER reactors. The man-machine laboratory is used to study how new technologies influence the operator and to develop computer based systems for improving the safety and accessibility of complex processes.

  16. Chemical Technology Division annual technical report, 1993

    International Nuclear Information System (INIS)

    Chemical Technology (CMT) Division this period, conducted research and development in the following areas: advanced batteries and fuel cells; fluidized-bed combustion and coal-fired magnetohydrodynamics; treatment of hazardous waste and mixed hazardous/radioactive waste; reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; separating and recovering transuranic elements, concentrating radioactive waste streams with advanced evaporators, and producing 99Mo from low-enriched uranium; recovering actinide from IFR core and blanket fuel in removing fission products from recycled fuel, and disposing removal of actinides in spent fuel from commercial water-cooled nuclear reactors; and physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources and novel ceramic precursors; materials chemistry of superconducting oxides, electrified metal/solution interfaces, molecular sieve structures, thin-film diamond surfaces, effluents from wood combustion, and molten silicates; and the geochemical processes involved in water-rock interactions. The Analytical Chemistry Laboratory in CMT also provides a broad range of analytical chemistry support

  17. Centre for Low Emission Technology 05-06 annual report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    Since its inception, the Centre for Low Emission Technology (cLET) has been joined by Australian Coal Research Program, Stanwell Corporation, Tarong Energy Corporation Ltd. and the University of Queensland. The Centre's third annual report records key achievements, has a message from the Chairman and the CEO, Dr Thambimuthu and gives details of Board members. An outline is given of projects in the 4 programs: gasification core facility; gas cleaning; gas processing; gas separation; and social and economic integration. The annual accounts to 30 June 2006, and the budget and forecast for 2005-2006 are included.

  18. Annual meeting on nuclear technology 2013 workshop. Preserving competence in nuclear technology

    Energy Technology Data Exchange (ETDEWEB)

    Steinwarz, Wolfgang [Siempelkamp Nukleartechnik GmbH, Krefeld (Germany)

    2013-10-15

    Main topics of the actual energy and nuclear energy discussion are presented and discussed during the Plenary Session at the first day of the Annual Meeting on Nuclear Technology. The Topical Sessions and the Technical Session are the outstanding expert panels of the Annual Meeting on Nuclear Technology. Young scientists present results of their work on the Workshop Preserving Competence in Nuclear Technology. The Nuclear Energy Campus leads young people through the world of radioactivity, nuclear technology and radiation protection with informational stands and an interactive exhibition. The event is oriented towards upper high school (Gymnasium) classes and engineering classes from technical colleges, as well as students undergoing careers guidance. The main results of the technical part of the Annual Meeting on Nuclear Technology 2013, Berlin 14 to 16 May 2013, are summarised by the chairs for atw. The following report summarises the presentations of the Workshop Preserving Competence in Nuclear Technology. (orig.)

  19. Annual Report of Institute of Nuclear Chemistry and Technology 1998

    International Nuclear Information System (INIS)

    Actual edition of Annual Report is a full review of scientific activities of the Institute of Nuclear Chemistry and Technology (INCT), Warsaw, in 1998. The abstracts are presented in the following group of subjects: radiation chemistry and physics, radiation technologies (26); radiochemistry, stable isotopes, nuclear analytical methods, chemistry in general (25); radiobiology (11); nuclear technologies and methods - process engineering (5); material engineering, structural studies and diagnostics (9); nucleonic control systems (7). The edition also included the list of INCT scientific publications and patents as well as information on conferences organized or co-organized by the INCT in 1998

  20. Nutrient effects of broodstocks on the larvae in Patinopecten yessoensis

    Science.gov (United States)

    Bai, Yucen; Zhang, Tao; Qiu, Tianlong; Gao, Yan; Zhang, Xiaofang

    2015-07-01

    Patinopecten yessoensis is a commercial valuable species. This study deals with the effect of nutrient effects of the broodstock (mainly ovaries) on the larvae. Concentrations of total carbohydrate, total protein and total lipid in the gonads of P. yessoensis from three Hatcheries (Hatchery 1, Hatchery 2, and Hatchery 3) were determined before and after spawning. The relationship between the nutrient concentration in ovaries before spawning (BC) and that of larvae (LC) was assessed as well as the change in nutrient levels in ovaries after spawning (DC). Results indicate that the BC of total carbohydrate (7.66%) and total lipid (14.48%) in ovaries were significantly higher than in testes (5.20%, 5.20% respectively), whereas the BC of total protein in the ovaries was lower (61.76%) than in the testes (81.67%). The different gonadal composition suggests the different nutrient demands between male and female broodstocks in breeding season. Patinopecten yessoensis gonads contained a higher proportion of lipids, in comparison to other bivalves, which might be a response to the low ambient water temperatures. Further analysis of fatty acids showed that the concentrations of n-3PUFA, EPA and DHA in larvae (LC) were positively correlated with BC and DC, indicating the significant nutrient influence of broodstocks on the larvae. As these fatty acids are important in metabolism, and have been demonstrated to be influential to the viability of the larvae, larval growth and the settlement, spat growth, and juvenile survival in many bivalves, they could possibly be used as indexes to evaluate, and predict condition of broodstocks and larvae.

  1. Advanced Turbine Technology Applications Project (ATTAP). Annual report 1992

    Energy Technology Data Exchange (ETDEWEB)

    1993-03-01

    This report summarizes work performed by Garrett Auxiliary Power Division (GAPD), a unit of Allied-Signal Aerospace Company, during calendar year 1992, toward development and demonstration of structural ceramic technology for automotive gas turbine engines. This work was performed for the US Department of Energy (DOE) under National Aeronautics and Space Administration (NASA) Contract DEN3-335, Advanced Turbine Technology Applications Project (ATTAP). GAPD utilized the AGT101 regenerated gas turbine engine developed under the previous DOE/NASA Advanced Gas Turbine (AGT) program as the ATTAP test bed for ceramic engine technology demonstration. ATTAP focussed on improving AGT101 test bed reliability, development of ceramic design methodologies, and improvement of fabrication and materials processing technology by domestic US ceramics fabricators. A series of durability tests was conducted to verify technology advancements. This is the fifth in a series of technical summary reports published annually over the course of the five-year contract.

  2. CSIR: Mining Technology annual review 1995/96

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-05-01

    CSIR: Mining Technology works in close collaboration and strategic partnership with the mining industry, government institutions and employee organizations by acquiring, developing and transferring technologies to improve the safety and health of their employees, and to improve the profitability of the mining industry. The annual report describes achievements over the year in the areas of: rock engineering (including rockburst control, mine layout, coal pillar design, shallow bord and pillar workings); environmental safety and health (on topics such as mine rescue, ventilation systems, radiation protection, control of diesel exhaust emissions, reduction of underground mining hazards, and water quality); and mining systems, (rock breaking, backfill and hydraulic technology etc.). A list of Mining Technology`s 1995/96 publications is given.

  3. Institute of Nuclear Chemistry and Technology annual report 1994

    International Nuclear Information System (INIS)

    This annual report is a collection of short communications being a review of scientific activity of the Institute of Nuclear Chemistry and Technology, Warsaw, Poland in 1994. The papers are gathered into several branches as follows: radiation chemistry and physics (16 papers); radiochemistry, stable isotopes, nuclear analytical methods, chemistry in general (17 papers); radiobiology (6 papers); nuclear technologies and methods (30 papers). The annual report of INCT-1994 contains also a general information about the Institute, the full list of papers published in 1994, information about Nukleonika - the International Journal of Nuclear Research being edited in INCT, the list of patent granted and patent applications in 1994, information about conferences organized by the Institute, the list of Ph.D. and D.Sc. finished in 1994 as well as the list of research projects and contracts being realized in INCT during 1994

  4. BCTR: Biological and Chemical Technologies Research 1994 annual summary report

    Energy Technology Data Exchange (ETDEWEB)

    Petersen, G.

    1995-02-01

    The annual summary report presents the fiscal year (FY) 1994 research activities and accomplishments for the United States Department of Energy (DOE) Biological and Chemical Technologies Research (BCTR) Program of the Advanced Industrial Concepts Division (AICD). This AICD program resides within the Office of Industrial Technologies (OIT) of the Office of Energy Efficiency and Renewable Energy (EE). Although the OIT was reorganized in 1991 and AICD no longer exists, this document reports on efforts conducted under the former structure. The annual summary report for 1994 (ASR 94) contains the following: program description (including BCTR program mission statement, historical background, relevance, goals and objectives); program structure and organization, selected technical and programmatic highlights for 1994; detailed descriptions of individual projects; a listing of program output, including a bibliography of published work; patents, and awards arising from work supported by BCTR.

  5. Institute of Nuclear Chemistry and Technology annual report 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    This annual report is a collection of short communications being a review of scientific activity of the Institute of Nuclear Chemistry and Technology, Warsaw, Poland in 1994. The papers are gathered into several branches as follows: radiation chemistry and physics (16 papers); radiochemistry, stable isotopes, nuclear analytical methods, chemistry in general (17 papers); radiobiology (6 papers); nuclear technologies and methods (30 papers). The annual report of INCT-1994 contains also a general information about the Institute, the full list of papers published in 1994, information about Nukleonika - the International Journal of Nuclear Research being edited in INCT, the list of patent granted and patent applications in 1994, information about conferences organized by the Institute, the list of Ph.D. and D.Sc. finished in 1994 as well as the list of research projects and contracts being realized in INCT during 1994.

  6. Institute of Nuclear Chemistry and Technology annual report 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    The report is a collection of short communications being a review of scientific activity of the Institute of Nuclear Chemistry and Technology (INCT), Warsaw, in 1995. The papers are gathered in several branches as follows: radiation chemistry and physics (15); radiochemistry, stable isotopes, nuclear analytical methods, chemistry in general (23); radiobiology (7); nuclear technologies and methods (21); nucleonic control systems (5). The Annual Report of INCT - 1995 contains also a general information about the staff and organization of the Institute, the full list of scientific publications and patents, conferences organized by INCT, thesis and list of projects granted by Polish and international organizations.

  7. Institute of Nuclear Chemistry and Technology annual report 1995

    International Nuclear Information System (INIS)

    The report is a collection of short communications being a review of scientific activity of the Institute of Nuclear Chemistry and Technology (INCT), Warsaw, in 1995. The papers are gathered in several branches as follows: radiation chemistry and physics (15); radiochemistry, stable isotopes, nuclear analytical methods, chemistry in general (23); radiobiology (7); nuclear technologies and methods (21); nucleonic control systems (5). The Annual Report of INCT - 1995 contains also a general information about the staff and organization of the Institute, the full list of scientific publications and patents, conferences organized by INCT, thesis and list of projects granted by Polish and international organizations

  8. CSIR Division of Mining Technology annual review 1993/94

    Energy Technology Data Exchange (ETDEWEB)

    1994-01-01

    The Division of Mining Technology of the CSIR (Council for Scientific and Industrial Research) works in partnership with the mining industry to solve problems threatening the health, safety and well-being of the workforce, and the productivity of mining operations through the development and implementation of knowledge and technology. The annual review describes the Division's research projects in the following field: rock engineering (for gold, platinum and coal mining); mining environment; occupational hygiene; surface environment; and mining equipment and systems (systems and equipment, orebody information, coal mining and causes of accidents). Details are also given of the Division's publications, research and consultancy services and information centre.

  9. Proceedings of the first annual Nuclear Criticality Safety Technology Project

    International Nuclear Information System (INIS)

    This document represents the published proceedings of the first annual Nuclear Criticality Safety Technology Project (NCSTP) Workshop, which took place May 12--14, 1992, in Gaithersburg, Md. The conference consisted of four sessions, each dealing with a specific aspect of nuclear criticality safety issues. The session titles were ''Criticality Code Development, Usage, and Validation,'' ''Experimental Needs, Facilities, and Measurements,'' ''Regulation, Compliance, and Their Effects on Nuclear Criticality Technology and Safety,'' and ''The Nuclear Criticality Community Response to the USDOE Regulations and Compliance Directives.'' The conference also sponsored a Working Group session, a report of the NCSTP Working Group is also presented. Individual papers have been cataloged separately

  10. INL Control System Situational Awareness Technology Annual Report 2012

    Energy Technology Data Exchange (ETDEWEB)

    Gordon Rueff; Bryce Wheeler; Todd Vollmer; Tim McJunkin; Robert Erbes

    2012-10-01

    The overall goal of this project is to develop an interoperable set of tools to provide a comprehensive, consistent implementation of cyber security and overall situational awareness of control and sensor network implementations. The operation and interoperability of these tools will fill voids in current technological offerings and address issues that remain an impediment to the security of control systems. This report provides an FY 2012 update on the Sophia, Mesh Mapper, Intelligent Cyber Sensor, and Data Fusion projects with respect to the year-two tasks and annual reporting requirements of the INL Control System Situational Awareness Technology report (July 2010).

  11. Genetic management of broodstock populations with DNA markers in rainbow trout

    Science.gov (United States)

    DNA markers are very useful for aquaculture and fisheries broodstock management. They have been used for parentage assignment when spawning families share common environments, and to evaluate genetic parameters in broodstock populations. The selective breeding program at the National Center for Cool...

  12. Water Science and Technology Board Annual Report 2001-2002

    Energy Technology Data Exchange (ETDEWEB)

    None

    2002-10-01

    This annual report marks the twentieth anniversary of the Water Science and Technology Board (WSTB) (1982-2002). The WSTB oversees studies of water issues. The principal products of studies are written reports. These reports cover a wide range of water resources issues of national concern. The following three recently issued reports illustrate the scope of the WSTB's studies: Envisioning the Agenda for Water Resources Research in the Twenty-first Century. The Missouri River Ecosystem: Exploring the Prospects for Recovery, and Assessing the TMDL Approach to Water Quality Management. The WSTB generally meets three times each year where discussions are held on ongoing projects, strategic planning, and developing new initiatives. The meetings also foster communication within the water resources community. The annual report includes a discussion on current studies, completed studies 2001-2002, and future plans, as well as a listing of published reports (1983-2002).

  13. Annual report of Institute of Nuclear Chemistry and Technology 1996

    International Nuclear Information System (INIS)

    The report is a collection of short communications being a review of the scientific activities of the Institute of Nuclear Chemistry and Technology, Warsaw in 1996. The papers are gathered in several branches as follows: radiation chemistry and physics (17); Radiochemistry, stable isotopes, nuclear analytical methods,chemistry in general (20); radiobiology (9); nuclear technologies and methods (28).The last and biggest chapter has been divided in four smaller groups; process engineering; material engineering,structural studies,diagnostics; radiation technologies; nucleonic control systems. The annual report of INCT-1996 contains also a general information of Institute, the full list of scientific publications and patents, conferences organized by INCT, Ph.D. and D.Sc. thesis, a list of projects granted by Polish Committee of Scientific Research and other organizations

  14. 2014 DOE Vehicle Technologies Office Annual Merit Review

    Energy Technology Data Exchange (ETDEWEB)

    None

    2014-11-01

    The 2014 U.S. Department of Energy (DOE) Fuel Cell Technologies Office (FCTO) and Vehicle Technologies Office (VTO) Annual Merit Review and Peer Evaluation Meeting (AMR) was held June 16-20, 2014, in Washington, DC. The review encompassed all of the work done by the FCTO and the VTO: a total of 295 individual activities were reviewed for VTO, by a total of 179 reviewers. A total of 1,354 individual review responses were received for the VTO technical reviews. The objective of the meeting was to review the accomplishments and plans for VTO over the previous 12 months, and provide an opportunity for industry, government, and academia to give inputs to DOE on the Office with a structured and formal methodology. The meeting also provided attendees with a forum for interaction and technology information transfer.

  15. 2015 DOE Vehicle Technologies Office Annual Merit Review

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2015-11-01

    The 2015 U.S. Department of Energy (DOE) Fuel Cell Technologies Office (FCTO) and Vehicle Technologies Office (VTO) Annual Merit Review and Peer Evaluation Meeting (AMR) was held June 8-12, 2015, in Arlington, Virginia. The review encompassed all of the work done by the FCTO and the VTO: 258 individual activities were reviewed for VTO, by 170 reviewers. A total of 1,095 individual review responses were received for the VTO technical reviews. The objective of the meeting was to review the accomplishments and plans for VTO over the previous 12 months, and provide an opportunity for industry, government, and academia to give inputs to DOE on the Office with a structured and formal methodology. The meeting also provided attendees with a forum for interaction and technology information transfer.

  16. 2013 DOE Vehicle Technologies Office Annual Merit Review

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-10-01

    The 2013 U.S. Department of Energy (DOE) Fuel Cell Technologies Office (FCTO) and Vehicle Technologies Office (VTO) Annual Merit Review and Peer Evaluation Meeting (AMR) was held May 13-17, 2013, in Crystal City, Virginia. The review encompassed all of the work done by the FCTO and the VTO: a total of 287 individual activities were reviewed for VTO, by a total of 187 reviewers. A total of 1,382 individual review responses were received for the VTO technical reviews. The objective of the meeting was to review the accomplishments and plans for VTO over the previous 12 months, and provide an opportunity for industry, government, and academia to give inputs to DOE on the Office with a structured and formal methodology. The meeting also provided attendees with a forum for interaction and technology information transfer.

  17. Second annual clean coal technology conference: Proceedings. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-09

    The Second Annual Clean Coal Technology Conference was held at Atlanta, Georgia, September 7--9, 1993. The Conference, cosponsored by the US Department of Energy (USDOE) and the Southern States Energy Board (SSEB), seeks to examine the status and role of the Clean Coal Technology Demonstration Program (CCTDP) and its projects. The Program is reviewed within the larger context of environmental needs, sustained economic growth, world markets, user performance requirements and supplier commercialization activities. This will be accomplished through in-depth review and discussion of factors affecting domestic and international markets for clean coal technology, the environmental considerations in commercial deployment, the current status of projects, and the timing and effectiveness of transfer of data from these projects to potential users, suppliers, financing entities, regulators, the interested environmental community and the public. Individual papers have been entered separately.

  18. Annual report of Institute of Nuclear Chemistry and Technology 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    The report is a collection of short communications being a review of the scientific activities of the Institute of Nuclear Chemistry and Technology, Warsaw in 1996. The papers are gathered in several branches as follows: radiation chemistry and physics (17); Radiochemistry, stable isotopes, nuclear analytical methods,chemistry in general (20); radiobiology (9); nuclear technologies and methods (28).The last and biggest chapter has been divided in four smaller groups; process engineering; material engineering,structural studies,diagnostics; radiation technologies; nucleonic control systems. The annual report of INCT-1996 contains also a general information of Institute, the full list of scientific publications and patents, conferences organized by INCT, Ph.D. and D.Sc. thesis, a list of projects granted by Polish Committee of Scientific Research and other organizations.

  19. Flavobacterium psychrophilum Infections in Salmonid Broodstock and Hatchery-Propagated Stocks of the Great Lakes Basin.

    Science.gov (United States)

    Van Vliet, Danielle; Loch, Thomas P; Faisal, Mohamed

    2015-12-01

    Bacterial coldwater disease (BCWD), caused by Flavobacterium psychrophilum, threatens wild and propagated salmonids worldwide and leads to substantial economic losses. In addition to being horizontally transmitted, F. psychrophilum can be passed from infected parents to their progeny, furthering the negative impacts of this pathogen. In Michigan, both feral and captive salmonid broodstocks are the gamete sources used in fishery propagation efforts. A 5-year study was initiated to follow the prevalence of systemic F. psychrophilum infections in feral broodstocks of four species (steelhead Oncorhynchus mykiss [potadromous Rainbow Trout]; Coho Salmon O. kisutch; Chinook Salmon O. tshawytscha; and Atlantic Salmon Salmo salar) residing in three Great Lakes watersheds. Additionally, captive broodstocks of four species (Rainbow Trout, Brown Trout Salmo trutta, Lake Trout Salvelinus namaycush, and Brook Trout Salvelinus fontinalis) maintained at two facilities were assessed for the presence of F. psychrophilum. The resultant offspring from each broodstock population were sampled for F. psychrophilum infections multiple times throughout hatchery residency. Using selective flavobacterial culture and PCR confirmation, F. psychrophilum was detected in all broodstocks except the captive Lake Trout and Brook Trout. Logistic regression analysis demonstrated that among the infected feral broodstocks, Chinook Salmon from the Lake Michigan watershed had the highest prevalence of systemic F. psychrophilum infection (mean = 63.2%). Among the captive broodstocks, the Gilchrist Creek strain of Brown Trout had the highest infection prevalence (mean = 5%). Collectively, the captive broodstocks were found to have significantly lower infection prevalence than the feral broodstocks. Despite the high prevalence of systemic F. psychrophilum infections in many broodstock populations, the bacterium was rarely detected in their progeny during hatchery rearing. However, heavy losses associated

  20. Flavobacterium psychrophilum Infections in Salmonid Broodstock and Hatchery-Propagated Stocks of the Great Lakes Basin.

    Science.gov (United States)

    Van Vliet, Danielle; Loch, Thomas P; Faisal, Mohamed

    2015-12-01

    Bacterial coldwater disease (BCWD), caused by Flavobacterium psychrophilum, threatens wild and propagated salmonids worldwide and leads to substantial economic losses. In addition to being horizontally transmitted, F. psychrophilum can be passed from infected parents to their progeny, furthering the negative impacts of this pathogen. In Michigan, both feral and captive salmonid broodstocks are the gamete sources used in fishery propagation efforts. A 5-year study was initiated to follow the prevalence of systemic F. psychrophilum infections in feral broodstocks of four species (steelhead Oncorhynchus mykiss [potadromous Rainbow Trout]; Coho Salmon O. kisutch; Chinook Salmon O. tshawytscha; and Atlantic Salmon Salmo salar) residing in three Great Lakes watersheds. Additionally, captive broodstocks of four species (Rainbow Trout, Brown Trout Salmo trutta, Lake Trout Salvelinus namaycush, and Brook Trout Salvelinus fontinalis) maintained at two facilities were assessed for the presence of F. psychrophilum. The resultant offspring from each broodstock population were sampled for F. psychrophilum infections multiple times throughout hatchery residency. Using selective flavobacterial culture and PCR confirmation, F. psychrophilum was detected in all broodstocks except the captive Lake Trout and Brook Trout. Logistic regression analysis demonstrated that among the infected feral broodstocks, Chinook Salmon from the Lake Michigan watershed had the highest prevalence of systemic F. psychrophilum infection (mean = 63.2%). Among the captive broodstocks, the Gilchrist Creek strain of Brown Trout had the highest infection prevalence (mean = 5%). Collectively, the captive broodstocks were found to have significantly lower infection prevalence than the feral broodstocks. Despite the high prevalence of systemic F. psychrophilum infections in many broodstock populations, the bacterium was rarely detected in their progeny during hatchery rearing. However, heavy losses associated

  1. Environmental Science and Technology Department annual report 1994

    International Nuclear Information System (INIS)

    The Environmental Science and Technology Department engage in research to improve the scientific basis for new methods in industrial and agricultural production. Through basic and applied research in chemistry, biology and ecology the department aspires to develop methods and technology for the future industrial and agricultural production exerting less stress and strain on the environment. The research approach in the department is predominantly experimental. The research activities are organized in five research programmes and supported by three special facility units. In this annual report the main research activities during 1993 are introduced and reviewed in eight chapters. Chapter 1. Introduction. The five research programmes are covered in chapter 2-7: 2. Atmospheric Chemistry and Air Pollution, 3. Gene Technology and Population Biology, 4. Plant Nutrition and Mineral Cycling, 5. Trace Analysis and reduction of Pollution in the Geosphere, 6. Ecology, 7. Other Research Activities. The three special activity units in chapter 8. Special Facilities. The department's contribution to national and international collaborative research projects and programmes is presented in addition to information about large research and development facilities used and managed by the department. The department's educational and training activites are included in the annual report along with lists of publications, publications in press, lectures and poster presentations at international meetings. Names of the scientific and technical staff members, visiting scientists, post. doctoral fellows, Ph.D. students and M.Sc. students are also listed. (au) (9 tabs., 43 ills., 167 refs.)

  2. 2011 annual meeting on nuclear technology fully on line

    International Nuclear Information System (INIS)

    The 2010 ANNUAL MEETING ON NUCLEAR TECHNOLOGY, in its familiar structure of 3 days of conferencing about topics from politics, economy, and technology, was the forum for presentations and discussions in the field of nuclear power. Participants accepted the new concept. This was borne out in particular by the great interest shown in the pre-conference evening with its keynote address, but also by the success of the plenary day, which included a press forum and a panel discussion as components of active communication making the plenary day much more attractive. The 2011 Annual Meeting on Nuclear Technology will be held again at the Berlin Congress Center (bcc) in Alexanderplatz on May 17-19. From September 1, some first important information is available under www.kerntechnik.info, for instance, the call for Papers. All other information about the program will be published in due course. All steps of importance to participants, from registration for the meeting to booking hotel accommodation, can be handled online. (orig.)

  3. Environmental Science and Technology Department annual report 1994

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, A.; Gissel Nielsen, G.; Gundersen, V.; Nielsen, O.J.; Oestergaard, H.; Aarkrog, A. [eds.

    1995-02-01

    The Environmental Science and Technology Department engage in research to improve the scientific basis for new methods in industrial and agricultural production. Through basic and applied research in chemistry, biology and ecology the department aspires to develop methods and technology for the future industrial and agricultural production exerting less stress and strain on the environment. The research approach in the department is predominantly experimental. The research activities are organized in five research programmes and supported by three special facility units. In this annual report the main research activities during 1993 are introduced and reviewed in eight chapters. Chapter 1. Introduction. The five research programmes are covered in chapter 2-7: 2. Atmospheric Chemistry and Air Pollution, 3. Gene Technology and Population Biology, 4. Plant Nutrition and Mineral Cycling, 5. Trace Analysis and reduction of Pollution in the Geosphere, 6. Ecology, 7. Other Research Activities. The three special activity units in chapter 8. Special Facilities. The department`s contribution to national and international collaborative research projects and programmes is presented in addition to information about large research and development facilities used and managed by the department. The department`s educational and training activites are included in the annual report along with lists of publications, publications in press, lectures and poster presentations at international meetings. Names of the scientific and technical staff members, visiting scientists, post. doctoral fellows, Ph.D. students and M.Sc. students are also listed. (au) (9 tabs., 43 ills., 167 refs.).

  4. 2012 annual meeting on nuclear technology. Pt. 2. Section reports

    International Nuclear Information System (INIS)

    Summary report on 2 out of 12 sessions of the Annual Conference on Nuclear Technology held in Stuttgart, 22 to 24 May 2012: - Fusion technology (Section 9), and - Radiation protection (Section 11). The sessions of the sections: - Reactor physics and methods of calculation (Section 1), - Thermodynamics and fluid dynamics (Section 2), - Safety of nuclear installations - methods, analysis, results (Section 3), - Front end of the fuel cycle, fuel elements and core components (Section 4), - Radioactive waste management, storage (Section 5), - Operation of nuclear installations (Section 6), - New build and innovations (Section 7), - Decommissioning of nuclear installations (Section 8), and - Energy economics (Section 10) will be covered in further issues of atw. The report on the session: - Education, expert knowledge, know-how-transfer (Section 12) has been covered in atw 8/9 (2012). (orig.)

  5. 2010 ANNUAL MEETING ON NUCLEAR TECHNOLOGY. Pt. 3. Section reports

    International Nuclear Information System (INIS)

    Summary report on these 6 - out of 12 - Sessions of the Annual Conference on Nuclear Technology held in Berlin on May 3 to 6, 2010: - Decommissioning of Nuclear Installations (Session 7), - Fusion Technology (Session 8), - Energy Industry and Economics (Session 10), - Radiation Protection (Session 11), - New Build and Innovations (Session 12), and - Education, Expert Knowledge, Know-how-Transfer (Session 13). The other Sessions: - Reactor Physics and Methods of Calculation (Session 1), - Thermodynamics and Fluid Dynamics (Session 2), - Safety of Nuclear Installations - Methods, Analysis, Results (Session 3), - Front End and Back End of the Fuel Cycle, Radioactive Waste, Storage (Session 4), - Front End of the Fuel Cycle, Fuel Elements and Core Components (Session 5), - Operation of Nuclear Installations (Session 6) have been covered in atw issues 10 and 11 (2010). (orig.)

  6. Genetic variability of broodstocks of restocking programs in Brazil

    Directory of Open Access Journals (Sweden)

    Nelson Lopera-Barrero

    2015-09-01

    Full Text Available Objective. The aim of this study was evaluate the genetic diversity of the following broodstocks: piapara (Leporinus elongatus, dourado (Salminus brasiliensis, jundiá (Rhamdia quelen and cachara (Pseudoplatystoma fasciatum already useful for restocking programs in the Paranapanema, Iguaçu and Paraná Brazilian Rivers. Materials and methods. Samples from the caudal fin of 122 fish were analyzed. DNA was extracted by NaCl protocol. PCR products were separated by a horizontal agarose gel electrophoresis. The fragments were visualized by staining with ethidium bromide. Results. The amplification of 25 primers generated different fragments in studied species that allowed characterizing 440 fragments of 100-2900 bp. High percentage of polymorphic fragments (66.67 to 86.29, Shannon index (0.365 to 0.486 and genetic diversity of Nei (0.248 to 0.331 were detected. Conclusions. The level of genetic variability in the broodstocks was adequate for allowing their use in restocking programs in the studied Rivers. However, periodical monitoring studies of genetic variability in these stocks, the mating system, reproductive system and general management must be made to guarantee the preservation of wild populations.

  7. Effects of immobilization by electricity and MS-222 on brown trout broodstock and their progeny

    Science.gov (United States)

    Redman, S.D.; Meinertz, J.R.; Gaikowski, M.P.

    1998-01-01

    To determine the effects of electrically and chemically induced immobilization on postspawn broodstock and their progeny, age-2 and age-3 female broodstock and age-2 male broodstock of brown trout Salmo trutta were immobilized with electricity or tricaine methanesulfonate (MS-222), stripped of their eggs or milt, and weighed. Eggs taken from electrically immobilized females were fertilized with milt taken from age-2 males that were immobilized with electricity, and eggs taken from females immobilized with MS-222 were fertilized with milt taken from age-2 males that were immobilized with MS-222. After spawning, the mortality and weight of broodstock were compared twice over a 6-month period. Egg viability and growth of offspring fry from each treatment group were also compared. Electricity induced complete and consistent immobilization in brown trout broodstock. Electrically immobilized fish were more easily handled than fish immobilized with MS-222; however, electrically immobilized fish survival (70%) was significantly less than fish immobilized with MS-222 (83%). Broodstock growth differences were only noted at 6 months postexposure, when the mean weight of electrically immobilized fish was slightly less than the weight of fish immobilized with MS-222. Broodstock immobilization by electricity did not reduce egg viability or fry growth.

  8. Environmental Science and Technology Department annual report 1992

    International Nuclear Information System (INIS)

    Through basic and strategic research, the Environmental Science and Technology Department aspires to develop new ideas for industrial and agricultural production thus exerting less stress and strain on the environment. The department endeavours to develop a competent scientific basis for future production technology and management methods in industrial and agricultural production. The research approach in the department in predominantly experimental. Selected department research activities during 1992 are introduced and reviewed in seven chapters: 1. Introduction. 2. The Atmospheric Environment. 3. Plant Genetics and Resistance Biology. 4. Plant Nutrition and Mineral Cycling. 5. Chemistry of the Geosphere. 6. Ecology and Mineral Cycling. 7. Other Activities. The department's contribution to national and international collaborative research programmes in presented in addition in formation about large research and development facilities used and management by the department. The department's educational and training activities are included in the annual report along with lists of publications, publications in press, lectures and poster presentations at international meetings. The names of the scientific and technological staff members, visiting scientists, Post. doctoral fellows, Ph.D. students and M.Sc. students are also listed. (au)

  9. Eleventh Annual Conference on Alcohol and Biomass Energy Technologies

    Science.gov (United States)

    1991-10-01

    NEDO is undertaking a number of alcohol and biomass energy technology projects aiming at developing technology for bacterial production of fuel alcohol directly from currently unutilized resources such as agricultural and forestry wastes. This book reports the eleventh annual conference and consists of two parts. Part one describes outlines of these projects classified into three groups. In part two, achievements of these projects are reported in detail. For the development of fuel alcohol production technology using bacteria, searching for and breeding superior bacteria were achieved, and the optimum design of a total production system including a fermenter and peripheral processes was studied. Next, for the development of a high-efficiency membrane complex methane production unit from sewage and industrial waste water, membrane modules, a new type bioreactor, and an instrumentation and control system were investigated, leading to test production with pilot plants. Finally, for demonstration tests for converting oil-fired power stations to methanol, developmental studies on stationary diesel power generation and others were carried out.

  10. Environmental Science and Technology department. Annual report 1991

    International Nuclear Information System (INIS)

    Selected activities in the Environmental Science and Technology Department during 1991 are presented. The research approach in the department is predominantly experimental. The research topics emphasized are introduced and reviewed in chapters one to seven: 1. Introduction, 2. The Atmosphere, 3. Plant Genetics and Resistance Biology, 4. Plant Nutrition, 5. Geochemistry, 6. Ecology, 7. Other activities. The Department's contribution to national and international collaborative research programmes is presented together with information about large facilities managed and used by the department. Information about the department's education and training activities are included in the annual report along with lists of publications, publications in press, lectures and poster presentations. Further, names of the scientific and technical staff members, Ph.D. students and visiting scientists are listed. (au) (23 ills., 58 refs.)

  11. Advanced Automotive Technologies annual report to Congress, fiscal year 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This annual report serves to inform the United States Congress on the progress for fiscal year 1996 of programs under the Department of Energy`s Office of Advanced Automotive Technologies (OAAT). This document complies with the legislative requirement to report on the implementation of Title III of the Automotive Propulsion Research and Development Act of 1978. Also reported are related activities performed under subsequent relevant legislation without specific reporting requirements. Furthermore, this report serves as a vital means of communication from the Department to all public and private sector participants. Specific requirements that are addressed in this report are: Discussion of how each research and development contract, grant, or project funded under the authority of this Act satisfies the requirements of each subsection; Current comprehensive program definition for implementing Title III; Evaluation of the state of automotive propulsion system research and development in the United States; Number and amount of contracts and grants awarded under Title III; Analysis of the progress made in developing advanced automotive propulsion system technology; and Suggestions for improvements in automotive propulsion system research and development, including recommendations for legislation.

  12. Advanced Automotive Technologies annual report to Congress, fiscal year 1996

    International Nuclear Information System (INIS)

    This annual report serves to inform the United States Congress on the progress for fiscal year 1996 of programs under the Department of Energy's Office of Advanced Automotive Technologies (OAAT). This document complies with the legislative requirement to report on the implementation of Title III of the Automotive Propulsion Research and Development Act of 1978. Also reported are related activities performed under subsequent relevant legislation without specific reporting requirements. Furthermore, this report serves as a vital means of communication from the Department to all public and private sector participants. Specific requirements that are addressed in this report are: Discussion of how each research and development contract, grant, or project funded under the authority of this Act satisfies the requirements of each subsection; Current comprehensive program definition for implementing Title III; Evaluation of the state of automotive propulsion system research and development in the United States; Number and amount of contracts and grants awarded under Title III; Analysis of the progress made in developing advanced automotive propulsion system technology; and Suggestions for improvements in automotive propulsion system research and development, including recommendations for legislation

  13. Genetic characterization of broodstock brown trout from Bled fish-farm, Slovenia

    OpenAIRE

    Marić, Saša; Simonović, Predrag; Razpet, Andrej

    2010-01-01

    Background and Purpose: Due to environmental and economic concerns, Bled fish-farm is interested in establishing broodstocks of native brown trout (Salmo trutta L.). Progeny would be reared and released into rivers managed by the Fishing Club Bled. In this study was performed genetic characterization of broodstock from Bled fish-farm in order to assess hybridization of native brown trout of Danubian phylogeographic lineage with trout of the allochtonous Atlantic lineage. Material and Meth...

  14. Annual meeting on nuclear technology 2014 workshop. Preserving competence in nuclear technology

    Energy Technology Data Exchange (ETDEWEB)

    Steinwarz, Wolfgang [Siempelkamp Nucleartechnik GmbH, Krefeld (Germany)

    2014-11-15

    Main topics of the actual energy and nuclear energy discussion are presented and discussed during the Plenary Session at the first day of the Annual Meeting on Nuclear Technology (AMNT). The Topical Sessions and the Technical Session are the outstanding expert panels of the AMNT. 31 young scientists presented results of their work on the ''Workshop Preserving Competence in Nuclear Technology''. The report summarises the presentations. The Siempelkamp Competence Price 2014 was awarded to Rosmarie Hengstler-Eger for her presentation ''The effect of tensile stress on irradiation defect formation in Zircaloy-4''.

  15. Annual meeting on nuclear technology 2014 workshop. Preserving competence in nuclear technology

    International Nuclear Information System (INIS)

    Main topics of the actual energy and nuclear energy discussion are presented and discussed during the Plenary Session at the first day of the Annual Meeting on Nuclear Technology (AMNT). The Topical Sessions and the Technical Session are the outstanding expert panels of the AMNT. 31 young scientists presented results of their work on the ''Workshop Preserving Competence in Nuclear Technology''. The report summarises the presentations. The Siempelkamp Competence Price 2014 was awarded to Rosmarie Hengstler-Eger for her presentation ''The effect of tensile stress on irradiation defect formation in Zircaloy-4''.

  16. Has Information Technology Competence Ever Increased? Evidences from the Annual User Satisfaction Survey of Information Technology Services

    OpenAIRE

    Hun Myoung Park

    2015-01-01

    This study challenges a common myth on information technology competence and examins whether information technology competence has increased as the technology develops. An analytic framework considers if an inforation technology service is technologically sophisticated and if it is developed for general purpose for all users. The annual user satisfaction survey data from 1998 through 2014 are analyzed to present historical patterns of use of information technology services, satisfaction, and ...

  17. Has Information Technology Competence Ever Increased? Evidences from the Annual User Satisfaction Survey of Information Technology Services

    OpenAIRE

    Park, Hun Myoung

    2015-01-01

    This study challenges a common myth on information technology competence and examins whether information technology competence has increased as the technology develops. An analytic framework considers if an inforation technology service is technologically sophisticated and if it is developed for general purpose for allusers. The annual user satisfaction survey data from 1998 through 2014 are analyzed to present historical patterns of use of information technology services, satisfaction, and u...

  18. Annual Report 2013 of the Institute for Nuclear and Energy Technologies (KIT Scientific Reports ; 7678)

    OpenAIRE

    Schulenberg, Thomas

    2014-01-01

    The annual report of the Institute for Nuclear and Energy Technologies of KIT summarizes its research activities and provides some highlights of each working group, like thermal-hydraulic analyses for nuclear fusion reactors, accident analyses for light water reactors, and research on innovative energy technologies: liquid metal technologies for energy conversion, hydrogen technologies and geothermal power plants. The institute has been engaged in education and training in energy technologies.

  19. Annual Report 2014 of the Institute for Nuclear and Energy Technologies (KIT Scientific Reports ; 7702)

    OpenAIRE

    Schulenberg, Thomas

    2015-01-01

    The annual report of the Institute for Nuclear and Energy Technologies of KIT summarizes its research activities and provides some highlights of each working group, like thermal-hydraulic analyses for nuclear fusion reactors, accident analyses for light water reactors, and research on innovative energy technologies: liquid metal technologies for energy conversion, hydrogen technologies and geothermal power plants. The institute has been engaged in education and training in energy technologies.

  20. 75 FR 56651 - ITS Joint Program Office; Trucking Industry Mobility & Technology Coalition Annual Meeting

    Science.gov (United States)

    2010-09-16

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF TRANSPORTATION ITS Joint Program Office; Trucking Industry Mobility & Technology Coalition Annual Meeting AGENCY... the 9th day of September 2010. John Augustine, Managing Director, ITS Joint Program Office....

  1. Summary of the FY 2005 Batteries for Advanced Transportation Technologies (BATT) research program annual review

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2005-08-01

    This document presents a summary of the evaluation and comments provided by the review panel for the FY 2005 Department of Energy (DOE) Batteries for Advanced Transportation Technologies (BATT) program annual review.

  2. FY13 Annual Progress Report for SECA Core Technology Program

    Energy Technology Data Exchange (ETDEWEB)

    Stevenson, Jeffry W.; Koeppel, Brian J.

    2014-01-31

    components • Thermo-mechanical modeling and validation experiments were performed to understand/mitigate degradation of interconnects and seals during long-term stack operation. Electrochemical modeling 4 • Modeling tools were developed to improve understanding of electrochemical performance degradation of SOFCs related to changes in electrode microstructure and chemical interactions with contaminants. During FY13, PNNL continued to work with NETL to increase the extent of interaction between the SECA Core Technology Program and the SECA Industry Teams. In addition to using established mechanisms of communication, such as the annual SECA Workshop, representatives from PNNL and NETL participated in telecons and/or face-to-face meetings with all three industry teams during FY13. During these meetings, PNNL’s Core Technology Program work was presented in detail, after which feedback was solicited regarding current and future research topics. Results of PNNL’s SECA CTP work were also distributed via topical reports for the industry teams, DOE reports, technical society presentations, and papers in peer-reviewed technical journals. 5

  3. Annual Report 2003 of the Institute of Nuclear Chemistry and Technology

    International Nuclear Information System (INIS)

    The INCT 2003 Annual Report is the review of scientific activities in all branches being developed in the Institute of Nuclear Chemistry and Technology Warsaw. The studies are connected in general with the following fields: radiation chemistry and physics, radiation technologies, radiochemistry, stable isotopes, nuclear analytical methods, chemistry in general, radiobiology, process engineering, material engineering, structural studies, nucleonic control systems and accelerators

  4. FY2014 Electric Drive Technologies Annual Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    None

    2014-12-01

    The Electric Drive Technologies research and development (R&D) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies under development. Research is focused on developing power electronics (PE), electric motor, and traction drive system (TDS) technologies that will reduce system cost and improve their efficiency in transforming battery energy to useful work. The R&D is also aimed at better understanding and improving how various components of tomorrow’s automobiles will function as a unified system to improve fuel efficiency.

  5. FY2015 Electric Drive Technologies Annual Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2016-02-29

    The Electric Drive Technologies research and development (R&D) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies under development. Research is focused on developing power electronics (PE), electric motor, and traction drive system (TDS) technologies that will reduce system cost and improve their efficiency in transforming battery energy to useful work. The R&D is also aimed at better understanding and improving how various components of tomorrow’s automobiles will function as a unified system to improve fuel efficiency.

  6. Third annual women in science and technology conference

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-31

    This report presents discussions presented at the conference for women in science and technology. Topics include balancing careers with the family, choices concerning graduate schools, and sexual harassment.

  7. Third annual women in science and technology conference

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    This report presents discussions presented at the conference for women in science and technology. Topics include balancing careers with the family, choices concerning graduate schools, and sexual harassment.

  8. Development of Genetically-defined Yellow Perch (Perca flavescens) Broodstocks for Selective Breeding

    Science.gov (United States)

    We have initiated development of genetically defined yellow perch (Perca flavescens) broodstocks. For this, sixteen wild perch populations throughout the U.S. were sampled and analyzed using published (Leclerc et al. Molecular Ecology 2000, 9: 993-1011) and newly developed microsatellite loci. Gen...

  9. Hatchery manual for broodstock management and larval production of tubrot (Psetta maxima)

    NARCIS (Netherlands)

    Rurangwa, E.; Poelman, M.

    2011-01-01

    This hatchery manual is intended to provide detailed information from available published work and grey literature on turbot broodstock management and larval production. In reviewing larviculture techniques for turbot, it is notable that the major initial zoo technical advances were made in the 1980

  10. A tool for tracking genetic contributions of wild Penaeus (Melicertus) plebejus broodstock to hatchery populations.

    Science.gov (United States)

    Chan, Jackie T; Sherwin, William B; Taylor, Matthew D

    2014-12-01

    Stock enhancement, restocking and sea ranching are being increasingly applied in both fisheries and conservation. The contribution of hatchery stock to fishery harvest and the maintenance of the genetic structure of stocked populations are both important considerations when releasing captive-bred organisms into natural systems. Use of wild-caught broodstock generally overcomes some of the genetic problems associated with domesticated hatchery populations, but there is still a need to ensure that a sufficient proportion of the natural population contribute to production of the stocked cohort to realise the genetic benefits of using wild-caught broodstock. Releases of Penaeus (Melicertus) plebejus are under investigation as a means of increasing prawn production in recruitment-limited areas. We used the highly variable mitochondrial control region (mtCR) to assign post-larvae to maternal lineages in the hatchery and also to investigate the reproductive performance of female broodstock in terms of contribution to the production of the cohorts of post-larvae in the hatchery. Our data showed that mtCR can be a useful tool for tracking lineages and provided genetic evidence that unequal contribution and underproducing females can occur even in wild-caught broodstock. This work therefore highlights the importance of monitoring the genetic composition of pre-release hatchery stocks.

  11. RECRUITMENT OF GROUPER BROODSTOCK ON THE BASIS OF SINGLE LOCUS DNA MARKERS

    OpenAIRE

    Rodrigues Kenneth Francis; Zaidi Ahmad Tani; Syarul Nataqain Baharum

    2016-01-01

    The manuscript describes the development and application of molecular markers for the selection of broodstock of two species of Groupers Epinephelus fuscoguttatus and E. corallicola using single locus DNA markers. The article presents a database of verified DNA markers which can be applied for fish breeding and genetic selection.

  12. Streptococcal Arthritis, Osteolysis, Myositis, and Spinal Meningitis in Channel Catfish Ictalurus punctatus Broodstock

    Science.gov (United States)

    This report details findings of an investigation into complaints by commercial fingerling producers of low-grade mortalities, poor reproductive success, emaciation, skin lesions, and severely arched backs among broodstock of channel catfish Ictalurus punctatus. Gross lesions involved the jaw, fin ba...

  13. Broodstock management and hormonal manipulations of fish reproduction.

    Science.gov (United States)

    Mylonas, Constantinos C; Fostier, Alexis; Zanuy, Silvia

    2010-02-01

    Control of reproductive function in captivity is essential for the sustainability of commercial aquaculture production, and in many fishes it can be achieved by manipulating photoperiod, water temperature or spawning substrate. The fish reproductive cycle is separated in the growth (gametogenesis) and maturation phase (oocyte maturation and spermiation), both controlled by the reproductive hormones of the brain, pituitary and gonad. Although the growth phase of reproductive development is concluded in captivity in most fishes-the major exemption being the freshwater eel (Anguilla spp.), oocyte maturation (OM) and ovulation in females, and spermiation in males may require exogenous hormonal therapies. In some fishes, these hormonal manipulations are used only as a management tool to enhance the efficiency of egg production and facilitate hatchery operations, but in others exogenous hormones are the only way to produce fertilized eggs reliably. Hormonal manipulations of reproductive function in cultured fishes have focused on the use of either exogenous luteinizing hormone (LH) preparations that act directly at the level of the gonad, or synthetic agonists of gonadotropin-releasing hormone (GnRHa) that act at the level of the pituitary to induce release of the endogenous LH stores, which, in turn act at the level of the gonad to induce steroidogenesis and the process of OM and spermiation. After hormonal induction of maturation, broodstock should spawn spontaneously in their rearing enclosures, however, the natural breeding behavior followed by spontaneous spawning may be lost in aquaculture conditions. Therefore, for many species it is also necessary to employ artificial gamete collection and fertilization. Finally, a common question in regards to hormonal therapies is their effect on gamete quality, compared to naturally maturing or spawning broodfish. The main factors that may have significant consequences on gamete quality-mainly on eggs-and should be considered

  14. Technology and Risk Sciences Program. FY99 Annual Report

    International Nuclear Information System (INIS)

    In making the transition from weapons production to environmental restoration, DOE has found that it needs to develop reliable means of defining and understanding health and environmental risks and of selecting cost-efficient environmental management technologies so that cleanup activities can be appropriately directed. Through the Technology and Risk Sciences Project, the Entergy Spatial Analysis Research Laboratory attempts to provide DOE with products that incorporate spatial analysis techniques in the risk assessment, communication, and management processes; design and evaluate methods for evaluating innovative environmental technologies; and collaborate and access technical information on risk assessment methodologies, including multimedia modeling and environmental technologies in Russia and the Ukraine, while in addition training and developing the skills of the next generation of scientists and environmental professionals

  15. Water Science and Technology Board. Annual report 1991

    Energy Technology Data Exchange (ETDEWEB)

    1995-01-01

    This report summarizes the activities of the Water Science and Technology Board during 1991. The WSTB is intended to be a dynamic forum, a mechanism by which the broad community of water science, technology, and policy professionals can help assure high-quality national water programs. The principal products of WSTB studies are written reports which cover a wide range of water resources issues of current national concern. A few recent examples are: Restoration of aquatic ecosystems - science, technologies and public policy; Water transfers in the West - efficiency, equity and the environment; Opportunities in the hydrologic sciences; and Ground water models - scientific and regulatory applications. Projects completed, ongoing studies and published reports are described in detail in their respective sections of this report.

  16. Laser and Plasma Technology Division annual report 1995

    International Nuclear Information System (INIS)

    This report describes the activity of the Laser and Plasma Technology Division of Bhabha Atomic Research Centre, Mumbai during the period 1995. This division is engaged in the research and development of high power beams namely lasers, plasma and electron beams which are characterized by high power density. This division has strived to establish indigenous capability to cater to the requirements of the Department of Atomic Energy. The broad program objectives of the division are (1) development and technology readiness studies of laser, plasma and electron beam devices; (2) studies on related physical phenomena with a view to gain better understanding of the devices and (3) improvements in technology and exploration of new areas. This report has been compiled from individual reports of various groups/sections with marginal editing. At the end of each section; a list of publications by the staff members in the field indicated by the title of the section is given. refs., figs., tabs

  17. Laser and Plasma Technology Division, Annual Reports 1996 and 1997

    International Nuclear Information System (INIS)

    This report describes the activity of the Laser and Plasma Technology Division of Bhabha Atomic Research Centre during the two year period 1996- 1997. This division is engaged in the research and development of high power beams mainly laser, plasma and electron beams. Laser and Plasma Technology Division has strived to establish indigenous capability to cater to the requirements of Department of Atomic Energy. This involves development and technology readiness study of laser, plasma and electron beam devices. In addition, studies are also carried out on related physical phenomenon with a view to gain better understanding of the devices. This report has been compiled from individual reports of various groups/sections working in the division. A list of publications by the several members of the division is also included. (author)

  18. Bioremediation Education Science and Technology (BEST) Program Annual Report 1999

    Energy Technology Data Exchange (ETDEWEB)

    Hazen, Terry C.

    2000-07-01

    The Bioremediation, Education, Science and Technology (BEST) partnership provides a sustainable and contemporary approach to developing new bioremedial technologies for US Department of Defense (DoD) priority contaminants while increasing the representation of underrepresented minorities and women in an exciting new biotechnical field. This comprehensive and innovative bioremediation education program provides under-represented groups with a cross-disciplinary bioremediation cirruculum and financial support, coupled with relevant training experiences at advanced research laboratories and field sites. These programs are designed to provide a stream of highly trained minority and women professionals to meet national environmental needs.

  19. Laser and Plasma Technology Division annual report 1993

    International Nuclear Information System (INIS)

    This report describes the activities of the Laser and Plasma Technology Division during the year 1993. This Division is engaged in the research and development of high power beams namely laser, plasma and electron beams, which are characterized by high power density, normally in excess of 1 kW/mm2. Laser and Plasma Technology Division has strived to establish indigenous capability to cater to the requirements of the Department of Atomic Energy. The broad programme objectives of the Division are : (1) Development and technology readiness studies of laser, plasma and electron beam devices, (2) Studies on related physical phenomena with a view to gain better understanding of the devices, and (3) Improvements in technology and exploration of new areas. This report covers the activities of the Division during 1993 and describes how successfully the objectives have been met. The activities described in the report are diverse in nature. The report has been compiled from individual reports of various groups/sections with marginal editing. (author). refs., tabs., figs

  20. Fusion technology. Annual report of the. Association Cea/EURATOM

    International Nuclear Information System (INIS)

    In 1996, the French EURATOM-CEA Association made significant contributions to the European technology programme. This work is compiled in this report as follows: the ITER CEA activities and related developments are described in the first section; blankets and material developments for DEMO, long term safety studies are summarised in the second part; the Underlying Technology activities are compiled in the third part of this report. In each section, the tasks are sorted out to respect the European presentation. For an easy reading, appendix 4 gives the list of tasks in alphabetical order with a page reference list. The CEA is in charge of the French Technology programme. Three specific organizational directions of the CEA, located on four sites (see appendix 5) are involves in this programme: Advanced Technologies Direction (DTA), for Material task; Nuclear Reactors Direction (DRN), for Blanket design, Neutronic problems, Safety tasks; Physical Sciences Direction (DSM) uses the competence of the Tore Supra team in the Magnet design and plasma Facing Component field. The CEA programme is completed by collaborations with Technicatome, COMEX-Nucleaire and Ecole Polytechnique. The breakdown of the programme by Directions is presented in figure 1. The allocation of tasks is given in appendix 2 and in appendix 3, the related publications. (author)

  1. Water Science and Technology Board. Annual report 1993-1994

    Energy Technology Data Exchange (ETDEWEB)

    1995-01-01

    This report summarizes the activities of the Water Science and Technology Board during 1993-1994. The WSTB is intended to be a dynamic forum, a mechanism by which the broad community of water science, technology, and policy professionals can help assure high-quality national water programs. The principal products of WSTB studies are written reports which cover a wide range of water resources issues of current national concern. A few recent examples are: Alternatives for ground water cleanup; Managing wastewater in coastal urban areas; and, Water transfers in the West - efficiency, equity and the environment. Projects completed, ongoing studies and published reports are described in detail in their respective sections of this report.

  2. Water Science and Technology Board. Annual report 1992-1993

    Energy Technology Data Exchange (ETDEWEB)

    1995-01-01

    This report summarizes the activities of the Water Science and Technology Board during 1992. The WSTB is intended to be a dynamic forum, a mechanism by which the broad community of water science, technology, and policy professionals can help assure high-quality national water programs. The principal products of WSTB studies are written reports which cover a wide range of water resources issues of current national concern. A few recent examples are: Managing wastewater in coastal urban areas; Ground water vulnerability assessment; Water transfers in the West - efficiency, equity and the environment; and Opportunities in the hydrologic sciences. Projects completed, ongoing studies and published reports are described in detail in their respective sections of this report.

  3. US Department of Energy first annual clean coal technology conference

    International Nuclear Information System (INIS)

    The first public review of the US DOE/Industry co-funded program to demonstrate the commercial readiness of Clean Coal Technologies (CCT) was held at Cleveland, Ohio Sept. 22--24, 1992. The objectives were to provide electric utilities, independent power producers, and potential foreign users information on the DOE-supported CCT projects including status, results, and technology performance potential; to further understanding of the institutional, financial, and technical considerations in applying CCTs to Clean Air Act compliance strategies; to discuss to export market, financial and institutional assistance, and the roles of government and industry in pursuing exports of CCTs; and to facilitate meetings between domestic and international attendees to maximize export opportunities

  4. Laser and Plasma Technology Division annual report 1994

    International Nuclear Information System (INIS)

    A brief account of the research and development (R and D) activities carried out by Laser and Plasma Technology Division of Bhabha Atomic Research Centre, Bombay during the period 1994 is presented. The activities are reported under the headings: 1) laser activities, 2) thermal plasma activities, 3) electron beam activity. At the end of each section, a list of publications by the staff members in the field indicated by the title of the section is given. (author). refs., tabs., figs

  5. Laser and Plasma Technology Division : annual report (1990-91)

    International Nuclear Information System (INIS)

    A brief account of the research and development (R and D) activities carried out by Laser and Plasma Technology Division, Bhabha Atomic Research Centre, Bombay during the period 1990-91 is presented. The R and D activities are reported under the headings: 1) Laser Activities, 2) Thermal Plasma Activities, and 3) Electron Beam Activities. List of publications including journal articles, papers published in symposia, conferences etc. is given at the end. (original). figs

  6. Laser and Plasma Technology Division : annual report 1991

    International Nuclear Information System (INIS)

    A brief account of the research and development (R and D) activities carried out by Laser and Plasma Technology Division, Bhabha Atomic Research Centre, Bombay during 1991 is presented. The R and D activities are reported under the headings (1) Laser Activities, (2) Thermal Plasma Activities, (3) Electron Beam Activities and (4) Divisional Workshop Activities. List of publications is given at the end of each activity heading

  7. Environmental Science and Technology Department annual report 1995

    International Nuclear Information System (INIS)

    The Environmental Science and Technology Department aspires to develop new ideas and methods for industrial and agricultural production through basic and applied research thus exerting less stress and strain on the environment. The department endeavours to develop a competent scientific basis for future production technology and management methods in industrial and agricultural production. The research approach in the department is mainly experimental. Selected departmental research activities during 1995 are introduced and reviewed in seven chapters: 1. Introduction, 2. Atmospheric Chemistry and Air Pollution, 3. Gene Technology and Population biology, 4. Plant Nutrition and Nutrient Cycling, 5. Trace analysis and Reduction of Pollution in the Geosphere, 6. Ecology, and 7. Other Activities. The department's contribution to national and international collaborative research programmes are presented together with information about large experimental facilities used in the department. Information about the department's contribution to education and training are included in the report along with lists of publications, publications in press, lectures and poster presentations at international meetings. The names of the scientific and technical staff members, visiting scientists, Postdoctoral fellows, Ph.D students and M.Sc. students are also listed. (au) 15 tabs., 40 ills., 163 refs

  8. Laser and Plasma Technology Division annual report 1992

    International Nuclear Information System (INIS)

    The report describes the research and development (R and D) activities of Laser and Plasma technology Division, Bhabha Atomic Research Centre, Bombay during 1992. The broad programme objectives of the Division are: (1) development and technology readiness studies of laser, plasma and electron beam devices, (2) studies on related physical phenomena with a view to gain better understanding of the devices, and (3) improvements in technology and exploration of new areas. The R and D activities are reported under the sections entitled: (1) Laser Activities, (2) Thermal Plasma Activities, and (3) Electron Beam Activities. At the end of each section, a list of publications by the staff members in the field indicated by the title of the section is given. Some of the highlights of R and D work during 1992 are:(1) fabrication of an electron beam sustained CO2 laser, (2) commissioning of a 6.5 m high LMMHD (Liquid Metal Magneto-hydrodynamic) generator loaded with 1.5 tons of mercury, (3) fabrication of electron beam processing equipment, and (4) study of the magnetic properties of vanadium nitride films produced by reactive sputtering in an indigenously developed DC magnetron sputtering equipment. (author). 56 figs., 6 tabs

  9. Environmental Science and Technology Department annual report 1996

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, A.; Gissel Nielsen, G.; Gundersen, V.; Nielsen, O.J.; Oestergaard, H.; Aarkrog, A. [eds.

    1997-02-01

    The Environmental Science and Technology Department aspires to develop new ideas and methods for industrial and agricultural production through basic and applied research thus exerting less stress and strain on the environment. The Department endeavours to develop a competent scientific basis for future production technology and management methods in industrial and agricultural production. The research approach in the Department is mainly experimental. Selected departmental research activities during 1996 are introduced and reviewed in seven chapters: 1. Introduction, 2. Atmospheric Chemistry and Air Pollution, 3. Gene Technology and Population Biology, 4. Plant Nutrition and Nutrient Cycling, 5. Trace Analysis and Reduction of Pollution in the Geosphere, 6. Ecology, and 7. Other Activities. The Department`s contribution to national and international collaborative research programmes are presented together with information about the use of its large experimental facilities. Information about the Department`s contribution to education and training are included in the report along with lists of publications, publications in press, lectures and poster presentations at international meetings. The names of the scientific and technical staff members, visiting scientists, Postdoctoral fellows, Ph.D students and M.Sc. students are also listed. (au) 15 tabs., 63 ills., 207 refs.

  10. Environmental Science and Technology Department annual report 1996

    International Nuclear Information System (INIS)

    The Environmental Science and Technology Department aspires to develop new ideas and methods for industrial and agricultural production through basic and applied research thus exerting less stress and strain on the environment. The Department endeavours to develop a competent scientific basis for future production technology and management methods in industrial and agricultural production. The research approach in the Department is mainly experimental. Selected departmental research activities during 1996 are introduced and reviewed in seven chapters: 1. Introduction, 2. Atmospheric Chemistry and Air Pollution, 3. Gene Technology and Population Biology, 4. Plant Nutrition and Nutrient Cycling, 5. Trace Analysis and Reduction of Pollution in the Geosphere, 6. Ecology, and 7. Other Activities. The Department's contribution to national and international collaborative research programmes are presented together with information about the use of its large experimental facilities. Information about the Department's contribution to education and training are included in the report along with lists of publications, publications in press, lectures and poster presentations at international meetings. The names of the scientific and technical staff members, visiting scientists, Postdoctoral fellows, Ph.D students and M.Sc. students are also listed. (au) 15 tabs., 63 ills., 207 refs

  11. Annual Report of the Institute of Nuclear Chemistry and Technology 2000

    International Nuclear Information System (INIS)

    The INCT 2000 Annual Report is the review of scientific activities in all branches being developed in the Institute of Nuclear Chemistry and Technology Warsaw. The studies are connected in general with the following fields: radiation chemistry and physics, radiation technologies, radiochemistry, stable isotopes, nuclear analytical methods, chemistry in general, radiobiology, process engineering, material engineering, structural studies and diagnostics and nucleonic control systems and accelerators

  12. 2006 Annual Conference of Chinese Society of Particuology cum Symposium on Particle Technology across Taiwan Straits

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ The 2006 Annual Conference of Chinese Society of Particuology cum Symposium on Particle Technology across Taiwan Straits, held in Beijing from August 18 to 21, 2006, was hosted by Chinese Society of Particuology and organized jointly by Institute of Process Engineering, CAS, and State Key Laboratory of Heavy Oil Processing,China University of Petroleum.

  13. XXXVIII Annual meeting of the Argentine Association of Nuclear Technology (AATN 2011)

    International Nuclear Information System (INIS)

    The 38th Annual meeting of the Argentine Association of Nuclear Technology was organized by the AATN (Asociacion Argentina de Tecnologia Nuclear) in Buenos Aires, Argentine, between the 14 and 18 November of 2011. In this event 146 papers in 16 Sessions, with 13 Plenary Conferences and 3 Roundtables were presented.

  14. Environmental Science and Technology Department annual report 1993

    International Nuclear Information System (INIS)

    The Environmental Science and Technology Department aspires to develop new ideas and methods for industrial and agricultural production through basic and applied research thus exerting less stress and strain on the environment. The department endeavours to develop a competent scientific basis for future production technology and management methods in industrial and agricultural production. The research approach in the department is mainly experimental. Selected departmental research activities during 1993 are presented and reviewed in seven chapters: 1. Introduction, 2. The Atmospheric Environment, 3. Plant Genetics and Resistance Biology, 4. Plant Nutrition and Nutrient Cycling, 5. Applied Geochemistry, 6. Ecology and Mineral Cycling, 7. Other Activities. The Department's contribution to national and international collaborative research programmes are presented together with information about large experimental facilities used in the department. Information about the department's contribution to education and training are included in the report along with lists of publications, publications in press, lectures and poster presentations at international meetings. The names of the scientific and technical staff members, visiting scientists, Postdoctoral fellows, Ph.D students and M.Sc students are also listed. (au)

  15. Technology Center for Nuclear Control 2004 Annual Report

    International Nuclear Information System (INIS)

    This research describe the activities of TCNC in KAERI, given the authority from the Government. TCNC is carrying out technical assistance to the Government after reviewing the safeguards and physical protection at the nuclear facilities, while developing the divers technologies related to the export control and nuclear material accountancy. Relating to the safeguards implementation, activities for national safeguards inspection and supporting activities for IAEA safeguards inspection are described. For this, Results of national safeguards inspection and facility status are analyzed. Besides, implementation of the Additional Protocol and IAEA's complementary access supporting activities due to the effectuation of the Additional Protocol are introduced. With regards to the nuclear control planning, technical support for the government about the North Korea nuclear issues and export control, international cooperation are delineated. Holding a non-proliferation workshop, web-site operation of TCNC and Yaksan and work for the publication of TCNC newsletter are also described as a part of nuclear control planning related work. For the safeguards technology area, operation of remote monitoring system using VPN, works for tracing nuclear activities through swipe analysis and the development and improvement of verification equipment such as OFS are presented. Businesses related to the physical protection such as supporting for establishing a plan to implement the effectuated law such as approval examination of physical protection regulations and inspection on facilities and transport protection and development of design basis threat and emergency manual for physical protection etc. are mentioned

  16. Direct conversion technology: Annual summary report CY 1988

    Energy Technology Data Exchange (ETDEWEB)

    Massier, P.F.; Bankston, C.P.; Fabris, G.; Kirol, L.D.

    1988-12-01

    The overall objective of the Direct Conversion Technology task is to develop an experimentally verified technology base for promising direct thermal-to-electric energy conversion systems that have potential application for energy conservation in the end-use sectors. This report contains progress of research on the Alkali Metal Thermal-to-Electric Converter (AMTEC), and on the Two-Phase Liquid-Metal MHD Electrical Generator (LMMHD) for the period January 1988 through December 1988. Research on these concepts was initiated during October 1987. In addition, status reviews and assessments are presented for thermomagnetic converter concepts and for thermoelastic converters (Nitinol heat engines). Reports prepared on previous occasions contain discussions on the following other direct conversion concepts: thermoelectric, pyroelectric, thermionic thermophotovoltaic and thermoacoustic; and also, more complete discussions of AMTEC and LMMHD systems. A tabulated summary of the various systems which have been reviewed thus far has been prepared. Some of the important technical research needs are listed and a schematic of each system is shown. These tabulations are included herein as figures. 43 refs., 26 figs., 1 tab.

  17. Annual Technology Baseline (Including Supporting Data); NREL (National Renewable Energy Laboratory)

    Energy Technology Data Exchange (ETDEWEB)

    Blair, Nate; Cory, Karlynn; Hand, Maureen; Parkhill, Linda; Speer, Bethany; Stehly, Tyler; Feldman, David; Lantz, Eric; Augusting, Chad; Turchi, Craig; O' Connor, Patrick

    2015-07-08

    Consistent cost and performance data for various electricity generation technologies can be difficult to find and may change frequently for certain technologies. With the Annual Technology Baseline (ATB), National Renewable Energy Laboratory provides an organized and centralized dataset that was reviewed by internal and external experts. It uses the best information from the Department of Energy laboratory's renewable energy analysts and Energy Information Administration information for conventional technologies. The ATB will be updated annually in order to provide an up-to-date repository of current and future cost and performance data. Going forward, we plan to revise and refine the values using best available information. The ATB includes both a presentation with notes (PDF) and an associated Excel Workbook. The ATB includes the following electricity generation technologies: land-based wind; offshore wind; utility-scale solar PV; concentrating solar power; geothermal power; hydropower plants (upgrades to existing facilities, powering non-powered dams, and new stream-reach development); conventional coal; coal with carbon capture and sequestration; integrated gasification combined cycle coal; natural gas combustion turbines; natural gas combined cycle; conventional biopower. Nuclear laboratory's renewable energy analysts and Energy Information Administration information for conventional technologies. The ATB will be updated annually in order to provide an up-to-date repository of current and future cost and performance data. Going forward, we plan to revise and refine the values using best available information.

  18. 5. annual clean coal technology conference: powering the next millennium. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    The Fifth Annual Clean Coal Technology Conference focuses on presenting strategies and approaches that will enable clean coal technologies to resolve the competing, interrelated demands for power, economic viability, and environmental constraints associated with the use of coal in the post-2000 era. The program addresses the dynamic changes that will result from utility competition and industry restructuring, and to the evolution of markets abroad. Current projections for electricity highlight the preferential role that electric power will have in accomplishing the long-range goals of most nations. Increase demands can be met by utilizing coal in technologies that achieve environmental goals while keeping the cost- per-unit of energy competitive. Results from projects in the DOE Clean Coal Technology Demonstration Program confirm that technology is the pathway to achieving these goals. The industry/government partnership, cemented over the past 10 years, is focused on moving the clean coal technologies into the domestic and international marketplaces. The Fifth Annual Clean Coal Technology Conference provides a forum to discuss these benchmark issues and the essential role and need for these technologies in the post-2000 era. This volume contains technical papers on: advanced coal process systems; advanced industrial systems; advanced cleanup systems; and advanced power generation systems. In addition, there are poster session abstracts. Selected papers from this proceedings have been processed for inclusion in the Energy Science and Technology database.

  19. Heavy oil reservoirs recoverable by thermal technology. Annual report

    Energy Technology Data Exchange (ETDEWEB)

    Kujawa, P.

    1981-02-01

    This volume contains reservoir, production, and project data for target reservoirs which contain heavy oil in the 8 to 25/sup 0/ API gravity range and are susceptible to recovery by in situ combustion and steam drive. The reservoirs for steam recovery are less than 2500 feet deep to comply with state-of-the-art technology. In cases where one reservoir would be a target for in situ combustion or steam drive, that reservoir is reported in both sections. Data were collectd from three source types: hands-on (A), once-removed (B), and twice-removed (C). In all cases, data were sought depicting and characterizing individual reservoirs as opposed to data covering an entire field with more than one producing interval or reservoir. The data sources are listed at the end of each case. This volume also contains a complete listing of operators and projects, as well as a bibliography of source material.

  20. Enviromental Science and Technology Department. Annual report 1990

    International Nuclear Information System (INIS)

    Selected activities of the Environmental Science and Technology Department during 1990 are presented. The research in the department is predominantly experimental, and the research topics emphaized are introduced and reviewed in eight chapters: 1. Introduction, 2. The Atmospheric Environment, 3. Plant Genetics and Biology, 4. Nutrient Efficiency in Plant Production, 5. Chemistry of the Geosphere, 6. Ecology and Mineral Cycling, 7. Other Acitvities, 8. Large Facilities. The department's contribution to national and international collaborative research programmes is presented together with information about large facilities managed and used by the department as well as activities within education and training. Lists of scientific and technical staff members, visiting scientists, Ph.D. students, publications, lectures and poster presentations are included in the report. (author)

  1. Compressed air energy storage technology program. Annual report for 1979

    Energy Technology Data Exchange (ETDEWEB)

    Loscutoff, W.V.

    1980-06-01

    The objectives of the Compressed Air Energy Storage (CAES) program are to establish stability criteria for large underground reservoirs in salt domes, hard rock, and porous rock used for air storage in utility applications, and to develop second-generation CAES technologies that have minimal or no dependence on petroleum fuels. During the year reported reports have been issued on field studies on CAES on aquifers and in salt, stability, and design criteria for CAES and for pumped hydro-storage caverns, laboratory studies of CAES in porous rock reservoris have continued. Research has continued on combined CAES/Thermal Energy Storage, CAES/Solar systems, coal-fired fluidized bed combustors for CAES, and two-reservoir advanced CAES concepts. (LCL)

  2. Conditioning of broodstock of tiger grouper, Epinephelus fuscoguttatus, in a recirculating aquaculture system

    OpenAIRE

    Saleem Mustafa; Mohd. Hafizzie Hajini; Shigeharu Senoo; Annita Yong Seok Kian

    2015-01-01

    Closing the cycle of commercial species of fish in a recirculating aquaculture system is gaining importance for a number of practical advantages. Founder broodstock originating from the wild population is conditioned to live in hatchery tanks under suitable environmental and feeding conditions and is induced to breed. The juveniles are grown to maturity and facilitated to spawn in captivity to close the life cycle in the hatchery. This experiment was carried out on tiger grouper (Epinephelus ...

  3. Fusion reactors: physics and technology. Annual progress report

    International Nuclear Information System (INIS)

    Fusion reactors are designed to operate at full power and generally at steady state. Yet experience shows the load variations, licensing constraints, and frequent sub-system failures often require a plant to operate at fractions of rated power. The aim of this study has been to assess the technology problems and design implications of startup and fractional power operation on fusion reactors. The focus of attention has been tandem mirror reactors (TMR) and we have concentrated on the plasma and blanket engineering for startup and fractional power operation. In this report, we first discuss overall problems of startup, shutdown and staged power operation and their influence on TMR design. We then present a detailed discussion of the plasma physics associated with TMR startup and various means of achieving staged power operation. We then turn to the issue of instrumentation and safety controls for fusion reactors. Finally we discuss the limits on transient power variations during startup and shutdown of Li17Pb83 cooled blankets

  4. 2003 annual meeting on nuclear technology 'Acceptance - key to success'

    International Nuclear Information System (INIS)

    For the first time, this year's Nuclear Technology Conference was held under a general headline: Acceptance - Key to Success. The organizers, Deutsches Atomforum e.V. (DAtF) and Kerntechnische Gesellschaft e.V. (KTG), welcomed roughly 1 000 participants from some twenty countries at the Berlin ESTREL Congress Center. In view of the importance of acceptance in the support, and the associated chances of success, of projects in the sociopolitical environment, national and international contributions to the plenary sessions focused on this topic. Also other technical sessions of the conference dealt with acceptance issues. In its traditional, proven structure, the program of the three-day event was arranged in plenary sessions on the first day, and technical sessions, specialized sessions, poster sessions, and special events on the following days. The partner country at JK 2003 was the United Kingdom, with contributions to the plenary day and to the specialized sessions. The meeting was accompanied by a technical exhibition and industrial meeting points of vendor, supplier, and service industries. This year's Karl Winnacker Prize was awarded to the renowned journalist, Gero von Randow. (orig.)

  5. 2006 annual nuclear technology conference on energy policy

    International Nuclear Information System (INIS)

    Liberals have clear ideas about the relations between the economy and the environment. Good ecology is also long-term economy, and there is no contradiction between the economy and the environment. New technologies, more investments into research, cooperation with industry and the public are required to bring about a new environmental policy in Germany. Energy policy needs a new beginning free from ideology. This is elaborated in 7 theses: - The key to successful economic development, more growth and employment is to be found in sustainable energy supply. - The 3 guiding principles of sustainable energy supply are (1) economic soundness, (2) continuity of supply, (3) environmental compatibility. - The supply situation is the more secure, the richer the energy mix, and the more sources from all over the world are used. - Taxes, levies, and costs due to shifting are a burden on energy prices and endanger the economic viability of energy supply. - We need a sensible energy mix composed of fossil energy resources, nuclear power, and renewable energies. - A rich energy mix combined with a powerful expansion of renewables, more measures to improve efficiency and save energy make Germany less dependent on international raw material purchases. - Climate change is a reality. Enhancing research and development efforts is our response. (orig.)

  6. Conditioning of broodstock of tiger grouper, Epinephelus fuscoguttatus, in a recirculating aquaculture system

    Directory of Open Access Journals (Sweden)

    Saleem Mustafa

    2015-11-01

    Full Text Available Closing the cycle of commercial species of fish in a recirculating aquaculture system is gaining importance for a number of practical advantages. Founder broodstock originating from the wild population is conditioned to live in hatchery tanks under suitable environmental and feeding conditions and is induced to breed. The juveniles are grown to maturity and facilitated to spawn in captivity to close the life cycle in the hatchery. This experiment was carried out on tiger grouper (Epinephelus fuscoguttatus. After preliminary observations, it was possible to identify appropriate environmental conditions in terms of water quality parameters, volume of broodstock tanks and ration. Growth was nearly isometric (growth exponent = 2.9185 and the condition factor = 1.86. This reflected good management conditions. Cues that trigger sex reversal in this protogynous fish in the hatchery were different from those that operate in nature. It appears that the differentiation of some individuals of a cohort into male sex is linked to socio-demographic cues as well as internal condition of the fish because it related to age and physiological condition. This view was reinforced by a lack of response in young fish to similar cues. The information generated through this study defines what is required for optimum conditioning of tiger grouper broodstock and explains the cues involved in sex differentiation.

  7. Heavy oil reservoirs recoverable by thermal technology. Annual report

    Energy Technology Data Exchange (ETDEWEB)

    Kujawa, P.

    1981-02-01

    The purpose of this study was to compile data on reservoirs that contain heavy oil in the 8 to 25/sup 0/ API gravity range, contain at least ten million barrels of oil currently in place, and are non-carbonate in lithology. The reservoirs within these constraints were then analyzed in light of applicable recovery technology, either steam-drive or in situ combustion, and then ranked hierarchically as candidate reservoirs. The study is presented in three volumes. Volume I presents the project background and approach, the screening analysis, ranking criteria, and listing of candidate reservoirs. The economic and environmental aspects of heavy oil recovery are included in appendices to this volume. This study provides an extensive basis for heavy oil development, but should be extended to include carbonate reservoirs and tar sands. It is imperative to look at heavy oil reservoirs and projects on an individual basis; it was discovered that operators, and industrial and government analysts will lump heavy oil reservoirs as poor producers, however, it was found that upon detailed analysis, a large number, so categorized, were producing very well. A study also should be conducted on abandoned reservoirs. To utilize heavy oil, refiners will have to add various unit operations to their processes, such as hydrotreaters and hydrodesulfurizers and will require, in most cases, a lighter blending stock. A big problem in producing heavy oil is that of regulation; specifically, it was found that the regulatory constraints are so fluid and changing that one cannot settle on a favorable recovery and production plan with enough confidence in the regulatory requirements to commit capital to the project.

  8. ADVANCED FUSION TECHNOLOGY RESEARCH AND DEVELOPMENT. ANNUAL REPORT TO THE US DEPARTMENT OF ENERGY

    International Nuclear Information System (INIS)

    OAK A271 ADVANCED FUSION TECHNOLOGY RESEARCH AND DEVELOPMENT ANNUAL REPORT TO THE US DEPARTMENT OF ENERGY. The General Atomics (GA) Advanced Fusion Technology Program seeks to advance the knowledge base needed for next-generation fusion experiments, and ultimately for an economical and environmentally attractive fusion energy source. To achieve this objective, they carry out fusion systems design studies to evaluate the technologies needed for next-step experiments and power plants, and they conduct research to develop basic and applied knowledge about these technologies. GA's Advanced Fusion Technology program derives from, and draws on, the physics and engineering expertise built up by many years of experience in designing, building, and operating plasma physics experiments. The technology development activities take full advantage of the GA DIII-D program, the DIII-D facility and the Inertial Confinement Fusion (ICF) program and the ICF Target Fabrication facility

  9. Proceedings of the Annual Solar Thermal Technology Research and Development Conference

    Science.gov (United States)

    Couch, W. A.

    1989-02-01

    The Annual Solar Thermal Technology Research and Development Conference is being held at the Holiday Inn Crowne Plaza in Arlington, Virgina, March 8 and 9, 1989. This year the conference is meeting in conjunction with SOLTECH '89. SOLTECH '89 is a jointly sponsored meeting of the Solar Energy Industries Association, Interstate Solar Coordination Council, Sandia National Laboratories and the Solar Energy Research Institute. This report contains the agenda, extended abstracts and most significant visual aids used by the speakers during the Solar Thermal Technology research and development sessions. The program is divided into three sessions: Solar Electric Technology, Non-Electric Research and Development and Applications, and Concentrators.

  10. The influence of different microalgal diets on Crassostrea angulata (Lamarck, 1819 broodstock conditioning

    Directory of Open Access Journals (Sweden)

    Catarina Anjos

    2014-06-01

    Full Text Available The Portuguese oyster Crassostrea angulata shows great potential in oyster farming. In Europe, pure populations of this species were observed only in the southern coasts of Portugal and Spain, namely in Rio Sado, Rio Mira and Guadalquivir. The conservation of C. angulata populations is important in the context of production diversification and biodiversity preservation. In this way the zootechnological development for seed hatchery production is extremely important. Broodstock conditioning is a key step in the process of rearing bivalve in hatchery. Many factors regulate the reproductive cycle, being food the most important. However the influence of the nutritional quality of different phytoplankton on sexual maturation has been poorly explored. To evaluate the effects of different diets on C. angulata sexual maturity, broodstock were conditioned with different food regimes: Diet 1: bi-specific combination of Pavlova lutheri and Isochrysis galbana clone T-ISO (1:1; Diet 2: tri-specific combination of P. lutheri, I galbana clone T-ISO and Skeletonema constatum (1:1:1; Diet 3: bi-specific combination of S. constatum and Chaetoceros calcitrans (1:1 and Diet 4: tri-specific combination of P. lutheri, S. constatum and C. calcitrans (1:1:1. During conditioning, condition index and gonad histological analysis were performed. Results showed heterogeneity between diets. At the beginning of conditioning 60% of individuals were in resting (stage 0, 30% were males in early gametogenesis (stage I and 10% were females in mature stage (stage III. At the end of the conditioning, the most effective diet was the Diet 3 (60 % of mature oysters with a mean condition index value of 2.83±0.95. Whereas those fed with Diet 1 have an unsuccessfully gonadic development, with 80% of individuals in resting stage. Indeed, the condition index, in Diet 1 decreased during the conditioning period. The results obtained in this study reinforce the idea that the diatom microalgae

  11. Independent Assessment of Technology Characterizations to Support the Biomass Program Annual State-of-Technology Assessments

    Energy Technology Data Exchange (ETDEWEB)

    Yeh, B.

    2011-03-01

    This report discusses an investigation that addressed two thermochemical conversion pathways for the production of liquid fuels and addressed the steps to the process, the technology providers, a method for determining the state of technology and a tool to continuously assess the state of technology. This report summarizes the findings of the investigation as well as recommendations for improvements for future studies.

  12. AICD -- Advanced Industrial Concepts Division Biological and Chemical Technologies Research Program. 1993 Annual summary report

    Energy Technology Data Exchange (ETDEWEB)

    Petersen, G.; Bair, K.; Ross, J. [eds.

    1994-03-01

    The annual summary report presents the fiscal year (FY) 1993 research activities and accomplishments for the United States Department of Energy (DOE) Biological and Chemical Technologies Research (BCTR) Program of the Advanced Industrial Concepts Division (AICD). This AICD program resides within the Office of Industrial Technologies (OIT) of the Office of Energy Efficiency and Renewable Energy (EE). The annual summary report for 1993 (ASR 93) contains the following: A program description (including BCTR program mission statement, historical background, relevance, goals and objectives), program structure and organization, selected technical and programmatic highlights for 1993, detailed descriptions of individual projects, a listing of program output, including a bibliography of published work, patents, and awards arising from work supported by BCTR.

  13. Biological and Chemical Technologies Research at OIT: Annual Summary Report, FY 1997

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, G.

    1998-03-01

    The annual summary report presents the fiscal year (FY) 1 997 research activities and accomplishments for the United States Department of Energy (DOE) Biological and Chemical Technologies Research (BCTR) Program. This BCTR program resides within the Office of Industrial Technologies (OIT) of the Office of Energy Efficiency and Renewable Energy (EE). The annual summary report for 1997 (ASR 97) contains the following: program description (including BCTR program mission statement, historical background, relevance, goals and objectives); program structure and organization; selected technical and programmatic highlights for 1 997; detailed descriptions of individual projects; and a listing of program output, including a bibliography of published work, patents, and awards arising from work supported by the program.

  14. 46th annual meeting on nuclear technology (AMNT 2015). Key topic / Enhanced safety and operation excellence

    International Nuclear Information System (INIS)

    Summary report on the Technical Session ''Operation and Safety of Nuclear Installations, Fuel - Special Issues'' of the 46th Annual Conference on Nuclear Technology (AMNT 2015) held in Berlin, 5 to 7 May 2015. Other Sessions of AMNT 2015 have been covered in atw 7 to 12 (2015), 1 (2016) and will be covered in further issues of atw.

  15. The Use of Fresh Cogongrass as Transportation Media with Level Dry System for Broodstock of Crayfish on Various Old Time

    Directory of Open Access Journals (Sweden)

    Ferdinand Hukama Taqwa

    2015-01-01

    Full Text Available The research was to determine the effect of the use of fresh cogongrass as media packaging filler on survival rate of broodstock of crayfish that transported with level dry system for 24, 48, dan 72 hours which randomized completely design experiment. The research preparation were media preparation of pond water, preparation of filler material and preparation of experimental animal (3 days adaptation after arrived from producer and starvation for 24 hours. The major research were anestetion of broodstock of crayfish with direct sock of low temperature at 12oC for ±5 minutes, transportation experiment of broodstock with fresh cogongrass as material filler. The result showed that the use of fresh cogongrass on various old time of dry level system has a significantly different to time of recovery and survival rate of broodstock of crayfish after tranforted. The fastest time of recovery was 89.55 seconds for 24 hours transportation and significantly different with time of transportation for 48 hours and 72 hours. The survival rate after tranported the highest was 98.89% for 24 hours transportation and significantly different with time of transportation for 48 hours and 72 hours. This research showed that the use of fresh cogongrass as material packaging filler of dry level system was still effective until 48 hours.Keywords: afresh cogongrass, broodstock of crayfish, various old time transportation, level dry system

  16. Annual meeting on nuclear technology 1995. Technical session: Why nuclear energy?

    International Nuclear Information System (INIS)

    The publication contains the full texts of papers presented at this technical session of the 1995 Annual Nuclear Congress held in Nuernberg. The key questions relating to the justification, the risks and the benefits of nuclear technology are discussed in the context of issues such as the global climate change and CO2 emissions. Various scenarios and models of ensured energy supply in the future are presented and explained, with a basic aspect recurring in all papers, addressing the pros and cons of the peaceful uses of nuclear energy as discussed at the onset of nuclear technology, and their validity in the light of current developments. (UA)

  17. 47{sup th} Annual meeting on nuclear technology (AMNT 2016). Opening address

    Energy Technology Data Exchange (ETDEWEB)

    Gueldner, Ralf [Deutsches Atomforum e.V. (DAtF), Berlin (Germany)

    2016-06-15

    The 47{sup th} Annual Meeting on Nuclear Technology (AMNT 2016) was an excellent opportunity for a comprehensive outlook on nuclear technology, fostering international exchange in industry, research, politics and administration. Ralf Gueldner, President of the German Atomic Forum (DAtF) talked about important decisions in nuclear energy in Germany in 2016. Finally, Gueldner noticed that even with a phase out, Germany needs nuclear expertise and competent people for the upcoming challenges and international cooperation. In this context, also publicly-financed education and research are indispensable.

  18. A comparison of fatty acid composition and quality aspects of eggs and larvae from cultured and wild broodstock of common sole ( Solea solea L . )

    DEFF Research Database (Denmark)

    Lund, Ivar; Steenfeldt, Svend Jørgen; Suhr, Karin;

    2008-01-01

    Eggs from a F-1 cultured broodstock of sole were compared with eggs from wild-caught breeders throughout one spawning season, to evaluate if egg quality may be affected by culture-related conditions. Fourteen batches of eggs from cultured broodstock and 17 batches from wild-caught sole were compa...

  19. Snake River Fall Chinook Salmon Brood-Stock Program, 1984 Annual Report of Research.

    Energy Technology Data Exchange (ETDEWEB)

    Harrell, Lee W.

    1985-02-01

    The objective is the enhancement of upriver stocks through research and development of an eggbank source. Viable gametes, produced from fish held to maturity in sea pens, will be made available for restoration purposes on the Snake River. Seawater entry trials with 0+-age and 1+-age fish have shown that 0+-age Snake River fall chinook salmon are not amenable to seawater entry and will either die or require up to 6 months to fully adapt to seawater. However, 1+-age smolts experience little problem at seawater entry; it is therefore suggested that Snake River fall chinook salmon be released as 1+ smolting fish in hatchery situations. Important marine mortalities occurring from osmoregulatory dysfunction, Bacterial Kidney Disease, and precocity at various life stages have been documented. Also, a previously unreported marine fungal pathogen has been identified. Mortality from this pathogen occurs from 3-years of age to maturity and can exceed 0.5% per day (resulting in losses to 90+%). At the end of December 1984, Snake River fall chinook salmon from 1980 (n = 67), 1981 (n = 876), 1982 (n = 4809), and 1983 (n = 7100) broods were under production. Because of the extensive mortality due to the marine fungal pathogen, only seven spawners were obtained from the 1980 stock in fall 1984. The 1980-brood spawners produced only minimal eggs and these will be used to investigate possible vertical transmission of the fungal pathogen. 4 figs.

  20. Research on Captive Broodstock Programs for Pacific Salmon, 2000-2001 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Berejikian, Barry A.; Dittman, Andrew H. (National Marine Fisheries Service, Manchester, WA); Hardy, Ronald W. (University of Idaho, Hagerman Fish Culture Experiment Station, Hagerman, ID)

    2001-06-01

    It is not yet possible to define a feeding regimen for captively-reared stocks similar to their natural regimen that enhances the post-release fitness of juveniles and improves the reproductive performance of adults. In the natural environment, seasonal differences in food quality and quantity have profound effects on growth and 'wild' attributes, such as external coloration and fin quality. Formulating the right feeds for conservation fish held for long periods in captivity before release is more complicated than formulating diets for farm fish. Recent research in salmonid nutrition shows it is necessary to consider daily dietary protein intake and protein intake relative to total dietary energy level, rather than simply the levels of total dietary lipid.

  1. Grande Ronde Basin Chinook Salmon Captive Brood and Conventional Supplementation Programs, 2001 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Carmichael, Richard W. (Oregon Department of Fish and Wildlife, La Grande, OR)

    2003-03-01

    Endangered Species Permit Number 1011 (formerly Permit No. 973) authorizes ODFW to take listed spring chinook salmon juveniles from Catherine Creek (CC), Lostine River (LR) and Grande Ronde River (GR) for research and enhancement purposes. Modification 2 of this permit authorizes ODFW to take adults for spawning and the production and release of smolts for the Captive and Conventional broodstock programs. This report satisfies the requirement that an annual report be submitted. Herein we report on activities conducted and provide cursory data analyses for the Grande Ronde spring chinook salmon Captive and Conventional broodstock projects from 1 January-31 December 2001.

  2. Grande Ronde Basin Chinook Salmon Captive Brood and Conventional Supplementation Program, 2000 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Carmichael, Richard W. (Oregon Department of Fish and Wildlife, La Grande, OR)

    2003-03-01

    Endangered Species Permit Number 1011 (formerly Permit No. 973) authorizes ODFW to take listed spring chinook salmon juveniles from Catherine Creek (CC), Lostine River (LR) and Grande Ronde River (GR) for research and enhancement purposes. Modification 2 of this permit authorizes ODFW to take adults for spawning and the production and release of smolts for the Captive and Conventional broodstock programs. This report satisfies the requirement that an annual report be submitted. Herein we report on activities conducted and provide cursory data analyses for the Grande Ronde spring chinook salmon Captive and Conventional broodstock projects from 1 January-31 December 2000.

  3. ADVANCED TECHNOLOGIES THRUST AREA, OFFICE OF SCIENCE AND TECHNOLOGY AND INTERNATIONAL: ANNUAL REPORT 2005

    International Nuclear Information System (INIS)

    The purpose of the Advanced Technologies Thrust (ATT) is to: (1) identify/develop technologies and processes; (2) reduce the cost of proposed repository development, construction, and operation with the application of these new technologies and processes; and (3) provide the data necessary to demonstrate feasibility of new technologies and processes. Fiscal Year 2005 was the inaugural year for this thrust. Several of the projects were already under way when this thrust team was formed; however, it was not until this year that a focused approach to managing these projects was established. The nine projects supporting the initiatives listed below are described: (1) The Evaluation of Improved Waste Package Materials and Fabrication Processes; (2) Advanced Approaches for Improved Waste Package Closure Welds; (3) Advanced Tunneling Technology; and (4) Improved Understanding of Extreme Ground Motions Predicted Using Probabilistic Seismic Hazard Analysis

  4. DOE FreedomCAR and vehicle technologies program advanced power electronic and electrical machines annual review report

    Energy Technology Data Exchange (ETDEWEB)

    Olszewski, Mitch [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2006-10-11

    This report is a summary of the Review Panel at the FY06 DOE FreedomCAR and Vehicle Technologies (FCVT) Annual Review of Advanced Power Electronics and Electric Machine (APEEM) research activities held on August 15-17, 2006.

  5. Annual conference on nuclear technology. Nuclear power 2001: option for the future

    International Nuclear Information System (INIS)

    The Dresden Palace for Culture was the venue of the ANNUAL MEETING ON NUCLEAR TECHNOLOGY on May 15-17, 2001, the first to be held in Dresden and the first also to be held in one of the new German federal states. Although no nuclear plant is in operation in East Germany after the Greifswald Nuclear Power Station was decommissioned, nuclear technology continues to play an important role especially in research and university teaching in this part of Germany. The organizers of the conference, Deutsches Atomforum e.V. (DAtF) and Kerntechnische Gesellschaft e.V. (KTG), welcomed more than 1000 participants from nineteen countries. The three-day program, with its traditional, proven structure, featured plenary sessions on the first day, and specialized sessions, technical sessions, poster sessions, and other events on the following days. The partner country at the Annual Meeting on Nuclear Technology was Russia, with a session specially devoted to selected topics of the country. The conference was accompanied by a technical exhibition with company meeting points of vendors, suppliers, and service industries. A video film forum was arranged for the interested public which featured contributions about nuclear research, nuclear power plant operation, transport and storage as well as decommissioning. Another major event was a workshop on 'Preserving Competence in Nuclear Technology'. The plenary day is described in this summary report, while the results of the technical sessions as seen by the rapporteurs are printed elsewhere in this issue of atw 8/9, 2001. (orig.)

  6. A review on broodstock nutrition of marine pelagic spawners: the curious case of the freshwater eels (Anguilla spp.)

    DEFF Research Database (Denmark)

    Heinsbroek, L.T.N.; Støttrup, J.G.; Jacobsen, C.;

    2013-01-01

    To sustain eel aquaculture, development of reproduction in captivity is vital. The aim of this review is to assess our current knowledge on the nutrition of broodstock eels in order to improve the quality of broodstock under farming conditions, drawing information from wild adult eels and other...... in the eggs of farmed eels were not detrimental. The total free amino acid amount and profile of eel eggs appears much different from other marine pelagic spawners. Nutritional intervention to influence egg composition seems feasible, but responsiveness of farmed eels to induced maturation might also require...

  7. Space Technology Mission Directorate Game Changing Development Program FY2015 Annual Program Review: Advanced Manufacturing Technology

    Science.gov (United States)

    Vickers, John; Fikes, John

    2015-01-01

    The Advance Manufacturing Technology (AMT) Project supports multiple activities within the Administration's National Manufacturing Initiative. A key component of the Initiative is the Advanced Manufacturing National Program Office (AMNPO), which includes participation from all federal agencies involved in U.S. manufacturing. In support of the AMNPO the AMT Project supports building and Growing the National Network for Manufacturing Innovation through a public-private partnership designed to help the industrial community accelerate manufacturing innovation. Integration with other projects/programs and partnerships: STMD (Space Technology Mission Directorate), HEOMD, other Centers; Industry, Academia; OGA's (e.g., DOD, DOE, DOC, USDA, NASA, NSF); Office of Science and Technology Policy, NIST Advanced Manufacturing Program Office; Generate insight within NASA and cross-agency for technology development priorities and investments. Technology Infusion Plan: PC; Potential customer infusion (TDM, HEOMD, SMD, OGA, Industry); Leverage; Collaborate with other Agencies, Industry and Academia; NASA roadmap. Initiatives include: Advanced Near Net Shape Technology Integrally Stiffened Cylinder Process Development (launch vehicles, sounding rockets); Materials Genome; Low Cost Upper Stage-Class Propulsion; Additive Construction with Mobile Emplacement (ACME); National Center for Advanced Manufacturing.

  8. 46th Annual meeting on nuclear technology (AMNT) 2015. Opening address

    International Nuclear Information System (INIS)

    The Annual Meeting on Nuclear Technology (ANMT) is the only one in Germany and also in Europe which is dedicated so holistically to nuclear technology and at the same time specifically promotes the international exchange of expertise. Main topics, which have been addressed in the Opening Adress by Ralf Gueldner, President of the DAtF (German Atomic Forum), are ''Final Repository Commission - Contribution and participation of the nuclear industry'', ''New attempt at alternative interim storage'', ''Future of the electricity market and the electricity supply'', ''Nuclear energy in the world - between departure and economic challenges'', ''Nuclear expertise in Germany'', ''The challenge of preserving skills'' and ''Nuclear technology in top-level research''.

  9. Annual Proceedings of Selected Research and Development Papers Presented at the Annual Convention of the Association for Educational Communications and Technology (36th, Anaheim, California, 2013). Volume 2

    Science.gov (United States)

    Simonson, Michael, Ed.

    2013-01-01

    For the thirty-sixth year, the Research and Theory Division of the Association for Educational Communications and Technology (AECT) is sponsoring the publication of these Proceedings. Papers published in this volume were presented at the annual AECT Convention in Anaheim, California. The Proceedings of AECT's Convention are published in two…

  10. Annual Proceedings of Selected Research and Development Papers Presented at the Annual Convention of the Association for Educational Communications and Technology (36th, Anaheim, California, 2013). Volume 1

    Science.gov (United States)

    Simonson, Michael, Ed.

    2013-01-01

    For the thirty-sixth year, the Research and Theory Division of the Association for Educational Communications and Technology (AECT) is sponsoring the publication of these Proceedings. Papers published in this volume were presented at the annual AECT Convention in Anaheim, California. The Proceedings of AECT's Convention are published in two…

  11. The Third Annual Deep Brain Stimulation Think Tank: A Review of Emerging Issues and Technologies

    Directory of Open Access Journals (Sweden)

    P. Justin eRossi

    2016-04-01

    Full Text Available This review summarizes the most contemporary clinical, electrophysiological, imaging, and computational work on DBS for the treatment of neurological and neuropsychiatric disease. Significant innovations of the past year are emphasized; these advances were presented at the 3rd Annual Deep Brain Stimulation Think Tank. The Think Tank’s contributors represent a unique multidisciplinary ensemble of expert neurologists, neurosurgeons, neuropsychologists, psychiatrists, scientists, engineers, and members of industry. Presentations and discussions covered a broad range of topics, including policy and advocacy considerations for the future of DBS, connectomic approaches to DBS targeting, developments in electrophysiology and related strides toward responsive DBS systems, and recent developments in sensor and device technologies.

  12. Clean Ferrous Casting Technology Research. Annual report, September 29, 1993--September 28, 1994

    Energy Technology Data Exchange (ETDEWEB)

    Stefanescu, D.M.; Lane, A.M.; Giese, S.R.; Pattabhi, R.; El-Kaddah, N.H.; Griffin, J.; Bates, C.E.; Piwonka, T.S.

    1994-10-01

    This annual report covers work performed in the first year of research on Clean Ferrous Casting Technology Research. During this year the causes of penetration of cast iron in sand molds were defined and a program which predicts the occurrence of penetration was written and verified in commercial foundries. Calculations were made to size a reaction chamber to remove inclusions from liquid steel using electromagnetic force and the chamber was built. Finally, significant progress was made in establishing pouring practices which avoid re-oxidation of steel during pouring application of revised pouring practices have led to reduced inclusion levels in commercially poured steel castings.

  13. 2003 East Tennessee Technology Park Annual Illness and Injury Surveillance Report

    Energy Technology Data Exchange (ETDEWEB)

    U.S. Department of Energy, Office of Health, Safety and Security, Office of Illness and Injury Prevention Programs

    2007-05-23

    Annual Illness and Injury Surveillance Program report for 2003 for the East Tennessee Technology Park (K-25).The U.S. Department of Energy’s (DOE) commitment to assuring the health and safety of its workers includes the conduct of epidemiologic surveillance activities that provide an early warning system for health problems among workers. The Illness and Injury Surveillance Program monitors illnesses and health conditions that result in an absence of workdays, occupational injuries and illnesses, and disabilities and deaths among current workers.

  14. 46th Annual meeting on nuclear technology. Key topic / outstanding know-how and sustainable innovations

    International Nuclear Information System (INIS)

    Summary report on the following Focus Session of the 46th Annual Conference on Nuclear Technology held in Berlin, 5 to 7 May 2015: Implementing New Safety Requirements in Europe (Christian Raetzke) The other Sessions of the Key Topics ''Outstanding Know-How and Sustainable Innovations'', ''Enhanced Safety and Operation Excellence'' and ''Decommissioning Experience and Waste Management Solutions'' and will be covered in further issues of atw.

  15. Australian Nuclear Science and Technology Organisation (ANSTO) Annual Report 1997-1998

    International Nuclear Information System (INIS)

    This is the 46th Annual Report of ANSTO or its predecessor, AAEC outlining the quality services being delivered and the development of knowledge in areas where ANSTO's nuclear science and technology and related capabilities are of strategic and technical benefit. ANSTO is reporting against established performance indicators within the the five core scientific business areas: International strategic relevance of Nuclear Science; Core nuclear facilities operation and development; Applications of Nuclear Science and Technology to the understanding of natural processes; Treatment and management of man-made and naturally occurring radioactive substances; and Competitiveness and ecological sustainability of industry. Also presented are the objectives, outcomes and activities which supports the core scientific areas by providing best practice corporate support, safety management, information and human resource management for ANSTO staff

  16. Australian Nuclear Science and Technology Organisation (ANSTO) Annual Report 1997-1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-09-01

    This is the 46th Annual Report of ANSTO or its predecessor, AAEC outlining the quality services being delivered and the development of knowledge in areas where ANSTO`s nuclear science and technology and related capabilities are of strategic and technical benefit. ANSTO is reporting against established performance indicators within the the five core scientific business areas: International strategic relevance of Nuclear Science; Core nuclear facilities operation and development; Applications of Nuclear Science and Technology to the understanding of natural processes; Treatment and management of man-made and naturally occurring radioactive substances; and Competitiveness and ecological sustainability of industry. Also presented are the objectives, outcomes and activities which supports the core scientific areas by providing best practice corporate support, safety management, information and human resource management for ANSTO staff

  17. Market for new coal powerplant technologies in the US: 1997 annual energy outlook results

    Energy Technology Data Exchange (ETDEWEB)

    Hutzler, M.J. [Dept. of Energy, Washington, DC (United States). Energy Information Administration

    1997-12-31

    Over the next 20 years, the combination of slow growth in the demand for electricity, even slower growth in the need for new capacity, especially baseload capacity, and the competitiveness of new gas-fired technologies limits the market for new coal technologies in the US. In the later years of the 1997 Annual Energy Outlook projections, post-2005, when a significant amount of new capacity is needed to replace retiring plants and meet growing demand, some new coal-fired plants are expected to be built, but new gas-fired plants are expected to remain the most economical choice for most needs. The largest market for clean coal technologies in the United States may be in retrofitting or repowering existing plants to meet stricter environmental standards, especially over the next 10 years. Key uncertainties include the rate of growth in the demand for electricity and the level of competing fuel prices, particularly natural gas. Higher than expected growth in the demand for electricity and/or relatively higher natural gas prices would increase the market for new coal technologies.

  18. Annual report of Nuclear Technology and Education Center. April 1, 2007-March 31, 2008

    International Nuclear Information System (INIS)

    This annual report summarizes the activities of Nuclear Technology and Education Center (NuTEC) of Japan Atomic Energy Agency (JAEA) in the fiscal year 2007. This is the third year since the inauguration of JAEA, and NuTEC now flexibly designs and carries out training courses upon request while carrying out the annually scheduled training programs. During this period, the number of trainees completing the domestic training courses was 466, and that for staff technical training was 694. Three prep-examination training courses for '1st class radiation protection supervisor', 'Nuclear fuel protection supervisor' and 'Professional engineer on nuclear and radiation' which were opened only for staff members were newly opened to the public. JAEA continued its cooperative activities with universities; cooperation with graduate school of University of Tokyo, cooperative graduate school program with 14 graduate schools and 1 under-graduate school, and Nuclear HRD Program initiated by MEXT and METI implemented since 2007. Joint course has started networking 3 universities utilizing the Japan Nuclear Education Network, and trial experimental courses for students from newly participating universities were offered. International cooperation was also conducted as scheduled. Joint training course and Instructor training program were carried out bilaterally with Indonesia, Thailand and Vietnam. Human Resources Development Workshop under the Forum for Nuclear Cooperation in Asia was arranged, and Asian Nuclear Training and Education Program to enhance the matching of the needs and available training program of the participating countries were discussed. (author)

  19. Broodstock management of the fine flounder Paralichthys adspersus (Steindachner, 1867) using recirculating aquaculture systems

    OpenAIRE

    Lili Carrera; Noemí Cota; Melissa Montes; Enrique Mateo; Verónica Sierralta; Teresa Castro; Angel Perea; Cristian Santos; Christian Catcoparco; Carlos Espinoza

    2013-01-01

    The present study describes the methodology used at IMARPE for the capture, acclimation and management of P. adspersus broodstock using recirculating aquaculture systems (RAS). RAS improved the water quality and maintained the environmental parameters during the acclimation period, temperature (17.2±1°C), oxygen (8.1±0.7 mg L-1), pH (7.3±0.2), ammonia (0.004±0.003 mg L-1), nitrite (0.52±0.2 mg L-1) and nitrate (3.45±2.6 mg L-1). Fish began to be fed normally from day 15 post-capture, once or ...

  20. Tucannon River Spring Chinook Captive Broodstock Program Final Environmental Assessment and Finding of No Significant Impact

    Energy Technology Data Exchange (ETDEWEB)

    N/A

    2000-05-24

    Bonneville Power Administration (BPA) is proposing to fund the Tucannon River Spring Chinook Captive Broodstock Program, a small-scale production initiative designed to increase numbers of a weak but potentially recoverable population of spring chinook salmon in the Tucannon River in the State of Washington. BPA has prepared an Environmental Assessment (EA) (DOE/EA-l326) evaluating the proposed project. Based on the analysis in the EA, BPA has determined that the proposed action is not a major Federal action significantly affecting the quality of the human environment, within the meaning of the National Environmental Policy Act (NEPA) of 1969. Therefore, the preparation of an Environmental Impact Statement (EIS) is not required, and BPA is issuing this Finding of No Significant Impact (FONSI).

  1. ORNL superconducting technology program for electric power systems. Annual report for FY 1993

    Energy Technology Data Exchange (ETDEWEB)

    Hawsey, R.A. [comp.

    1994-04-01

    The Oak Ridge National Laboratory (ORNL) Superconducting Technology Program is conducted as part of a national effort by the US Department of Energy`s Office of Energy Efficiency and Renewable Energy to develop the technology base needed by US industry for commercial development of electric power applications of high-temperature superconductivity. The two major elements of this program are conductor development and applications development. This document describes the major research and development activities for this program together with related accomplishments. The technical progress reported was summarized from information prepared for the FY 1993 Annual Program Review held July 28--29, 1993. This ORNL program is highly leveraged by the staff and other resources of US industry and universities. In fact, nearly three-fourths of the ORNL effort is devoted to industrial competitiveness projects with private companies. Interlaboratory teams are also in place on a number of industry-driven projects. Patent disclosures, working group meetings, staff exchanges, and joint publications and presentations ensure that there is technology transfer to US industry. Working together, the collaborative teams are making rapid progress in solving the scientific and technical issues necessary for the commercialization of long lengths of practical high-temperature superconductor wire and wire products.

  2. ORNL Superconducting Technology Program for Electric Power Systems--Annual Report for FY 2001

    Energy Technology Data Exchange (ETDEWEB)

    Hawsey, RA

    2002-02-18

    The Oak Ridge National Laboratory (ORNL) Superconducting Technology Program is conducted as part of a national effort by the US Department of Energy's Office of Energy Efficiency and Renewable Energy to develop the science and technology base needed by US industry for development of electric power applications of high-temperature superconductivity. The two major elements of this program are wire development and applications development. A new part of the wire research effort was the Accelerated Coated Conductor Initiative. This document describes the major research and development activities for this program together with related accomplishments. The technical progress reported was summarized from recent open literature publications, presentations, and information prepared for the FY 2001 Annual Program Review held August 1-3, 2001. Aspects of ORNL's work that were presented at the International Cryogenic Materials Conference/Cryogenic Engineering Conference (July 2001) are included in this report as well. This ORNL program is highly leveraged by the staff and other resources of US industry and universities. Interlaboratory teams are also in place on a number of industry-driven projects. Working group meetings, staff exchanges, and joint publications and presentations ensure that there is technology transfer with US industry. Working together, the collaborative teams are making rapid progress in solving the scientific and technical issues necessary for the commercialization of long lengths of practical high-temperature superconductor wire and wire-using systems.

  3. ORNL Superconducting Technology Program for electric power systems. Annual report for FY 1995

    Energy Technology Data Exchange (ETDEWEB)

    Hawsey, R.A. [comp.; Turner, J.W. [ed.

    1996-05-01

    The Oak Ridge National Laboratory (ORNL) Superconducting Technology Program is conducted as part of a national effort by the U.S. Department of Energy`s Office of Energy Efficiency and Renewable Energy to develop the science and technology base needed by U.S. industry for commercial development of electric power applications of high-temperature superconductivity. The two major elements of this program are wire development and systems development. This document describes the major research and development activities for this program together with related accomplishments. The technical progress reported was summarized from information prepared for the FY 1995 Annual Program Review held August 1-2, 1995. This ORNL program is highly leveraged by the staff and other resources of U.S. industry and universities. In fact, nearly three-fourths of the ORNL effort is devoted to cooperative projects with private companies. Interlaboratory teams are also in place on a number of industry-driven projects. Patent disclosures, working group meetings, staff exchanges, and joint publications and presentations ensure that there is technology transfer with U.S. industry. Working together, the collaborative teams are making rapid progress in solving the scientific and technical issues necessary for the commercialization of long lengths of practical high-temperature superconductor wire and wire-using systems.

  4. RNAi technologies in agricultural biotechnology: The Toxicology Forum 40th Annual Summer Meeting.

    Science.gov (United States)

    Sherman, James H; Munyikwa, Tichafa; Chan, Stephen Y; Petrick, Jay S; Witwer, Kenneth W; Choudhuri, Supratim

    2015-11-01

    During the 40th Annual Meeting of The Toxicology Forum, the current and potential future science, regulations, and politics of agricultural biotechnology were presented and discussed. The meeting session described herein focused on the technology of RNA interference (RNAi) in agriculture. The general process by which RNAi works, currently registered RNAi-based plant traits, example RNAi-based traits in development, potential use of double stranded RNA (dsRNA) as topically applied pesticide active ingredients, research related to the safety of RNAi, biological barriers to ingested dsRNA, recent regulatory RNAi science reviews, and regulatory considerations related to the use of RNAi in agriculture were discussed. Participants generally agreed that the current regulatory framework is robust and appropriate for evaluating the safety of RNAi employed in agricultural biotechnology and were also supportive of the use of RNAi to develop improved crop traits. However, as with any emerging technology, the potential range of future products, potential future regulatory frameworks, and public acceptance of the technology will continue to evolve. As such, continuing dialogue was encouraged to promote education of consumers and science-based regulations.

  5. ORNL Superconducting Technology Program for Electric Power Systems: Annual Report for FY 1999

    Energy Technology Data Exchange (ETDEWEB)

    Hawsey, R.A.

    2000-06-13

    The Oak Ridge National Laboratory (ORNL) Superconducting Technology Program is conducted as part of a national effort by the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy to develop the science and technology base needed by U.S. industry for development of electric power applications of high-temperature superconductivity. The two major elements of this program are wire development and applications development. This document describes the major research and development activities for this program together with related accomplishments. The technical progress reported was summarized from recent open literature publications, presentations, and information prepared for the FY 1999 Annual Program Review held July 26-28, 1999. Aspects of ORNL's work that were presented at the International Cryogenic Materials Conference and the Cryogenic Engineering Conference (July 1999) are included in this report, as well. This ORNL program is highly leveraged by the staff and other resources of U.S. industry and universities. In fact, nearly three-fourths of the ORNL effort is devoted to cooperative projects with private companies. Interlaboratory teams are also in place on a number of industry-driven projects. Working group meetings, staff exchanges, and joint publications and presentations ensure that there is technology transfer with U.S. industry. Working together, the collaborative teams are making rapid progress in solving the scientific and technical issues necessary for the commercialization of long lengths of practical high-temperature superconductor wire and wire-using systems.

  6. ORNL Superconducting Technology Program for electric power systems. Annual report for FY 1995

    International Nuclear Information System (INIS)

    The Oak Ridge National Laboratory (ORNL) Superconducting Technology Program is conducted as part of a national effort by the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy to develop the science and technology base needed by U.S. industry for commercial development of electric power applications of high-temperature superconductivity. The two major elements of this program are wire development and systems development. This document describes the major research and development activities for this program together with related accomplishments. The technical progress reported was summarized from information prepared for the FY 1995 Annual Program Review held August 1-2, 1995. This ORNL program is highly leveraged by the staff and other resources of U.S. industry and universities. In fact, nearly three-fourths of the ORNL effort is devoted to cooperative projects with private companies. Interlaboratory teams are also in place on a number of industry-driven projects. Patent disclosures, working group meetings, staff exchanges, and joint publications and presentations ensure that there is technology transfer with U.S. industry. Working together, the collaborative teams are making rapid progress in solving the scientific and technical issues necessary for the commercialization of long lengths of practical high-temperature superconductor wire and wire-using systems

  7. ORNL Superconducting Technology Program for electric power systems. Annual report for FY 1996

    Energy Technology Data Exchange (ETDEWEB)

    Koncinski, W.S. [ed.; Hawsey, R.A. [comp.

    1997-05-01

    The Oak Ridge National Laboratory (ORNL) Superconducting Technology Program is conducted as part of a national effort by the US Department of Energy`s Office of Energy Efficiency and Renewable Energy to develop the science and technology base needed by US industry for commercial development of electric power applications of high temperature superconductivity. The two major elements of this program are wire development and applications development. This document describes the major research and development activities for this program together with related accomplishments. The technical progress reported was summarized from recent open literature publications, presentations, and information prepared for the FY 1996 Annual Program Review held July 31 and August 1, 1996. This ORNL program is highly leveraged by the staff and other resources of US industry and universities. In fact, nearly three-fourths of the ORNL effort is devoted to cooperative projects with private companies. Interlaboratory teams are also in place on a number of industry-driven projects. Patent disclosures, working group meetings, staff exchanges, and joint publications and presentations ensure that there is technology transfer with US industry. Working together, the collaborative teams are making rapid progress in solving the scientific and technical issues necessary for the commercialization of long lengths of practical high temperature superconductor wire and wire-using systems.

  8. ORNL Superconducting Technology Program for Electric Power Systems, Annual Report for FY 1998

    Energy Technology Data Exchange (ETDEWEB)

    Hawsey, R.A.; Murphy, A.W.

    1999-04-01

    The Oak Ridge National Laboratory (ORNL) Superconducting Technology Program is conducted as part of a national effort by the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy to develop the science and technology base needed by U.S. industry for commercial development of electric power applications of high temperature superconductivity. The two major elements of this program are wire development and applications development. This document describes the major research and development activities for this program together with related accomplishments. The technical progress reported was summarized from recent open literature publications, presentations, and information prepared for the FY 1998 Annual Program Review held July 20-22, 1998. Aspects of ORNL's work that were presented at the Applied Superconductivity Conference (September 1998) are included in this report, as well. This ORNL program is highly leveraged by the staff and other resources of U.S. industry and universities. In fact, nearly three-fourths of the ORNL effort is devoted to cooperative projects. Patent disclosures, working group meetings, staff exchanges, and joint publications and presentations ensure that there is technology transfer with U.S. industry. Working together, the collaborative teams are making rapid progress in solving the scientific and technical issues necessary for the commercialization of long lengths of practical high temperature superconductor wire and wire-using systems.

  9. ORNL Superconducting Technology Program for Electric Power Systems, Annual Report for FY 1999

    Energy Technology Data Exchange (ETDEWEB)

    Hawsey, R.A.; Murphy, A.W

    2000-04-01

    The Oak Ridge National Laboratory (ORNL) Superconducting Technology Program is conducted as part of a national effort by the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy to develop the science and technology base needed by U.S. industry for development of electric power applications of high-temperature superconductivity. The two major elements of this program are wire development and applications development. This document describes the major research and development activities for this program together with related accomplishments. The technical progress reported was summarized from recent open literature publications, presentations, and information prepared for the FY 1999 Annual Program Review held July 26--28, 1999. Aspects of ORNL's work that were presented at the International Cryogenic Materials Conference and the Cryogenic Engineering Conference (July 1999) are included in this report, as well. This ORNL program is highly leveraged by the staff and other resources of U.S. industry and universities. In fact, nearly three-fourths of the ORNL effort is devoted to cooperative projects with private companies. Interlaboratory teams are also in place on a number of industry-driven projects. Working group meetings, staff exchanges, and joint publications and presentations ensure that there is technology transfer with U.S. industry. Working together, the collaborative teams are making rapid progress in solving the scientific and technical issues necessary for the commercialization of long lengths of practical high-temperature superconductor wire and wire-using systems.

  10. RNAi technologies in agricultural biotechnology: The Toxicology Forum 40th Annual Summer Meeting.

    Science.gov (United States)

    Sherman, James H; Munyikwa, Tichafa; Chan, Stephen Y; Petrick, Jay S; Witwer, Kenneth W; Choudhuri, Supratim

    2015-11-01

    During the 40th Annual Meeting of The Toxicology Forum, the current and potential future science, regulations, and politics of agricultural biotechnology were presented and discussed. The meeting session described herein focused on the technology of RNA interference (RNAi) in agriculture. The general process by which RNAi works, currently registered RNAi-based plant traits, example RNAi-based traits in development, potential use of double stranded RNA (dsRNA) as topically applied pesticide active ingredients, research related to the safety of RNAi, biological barriers to ingested dsRNA, recent regulatory RNAi science reviews, and regulatory considerations related to the use of RNAi in agriculture were discussed. Participants generally agreed that the current regulatory framework is robust and appropriate for evaluating the safety of RNAi employed in agricultural biotechnology and were also supportive of the use of RNAi to develop improved crop traits. However, as with any emerging technology, the potential range of future products, potential future regulatory frameworks, and public acceptance of the technology will continue to evolve. As such, continuing dialogue was encouraged to promote education of consumers and science-based regulations. PMID:26361858

  11. ORNL Superconducting Technology Program for electric power systems: Annual report for FY 1997

    Energy Technology Data Exchange (ETDEWEB)

    Koncinski, W.S.; O`Hara, L.M. [eds.; Hawsey, R.A.; Murphy, A.W. [comps.

    1998-03-01

    The Oak Ridge National Laboratory (ORNL) Superconducting Technology Program is conducted as part of a national effort by the US Department of Energy`s Office of Energy Efficiency and Renewable Energy to develop the science and technology base needed by US industry for commercial development of electric power applications of high temperature superconductivity. The two major elements of this program are wire development and applications development. This document describes the major research and developments activities for this program together with related accomplishments. The technical progress reported was summarized from recent open literature publications, presentations, and information prepared for the FY 1997 Annual Program Review held July 21--23, 1997. This ORNL program is highly leveraged by the staff and other resources of US industry and universities. In fact, nearly three-fourths of the ORNL effort is devoted to cooperative projects with private companies. Interlaboratory teams are also in place on a number of industry-driven projects. Patent disclosures, working group meetings, staff exchanges, and joint publications and presentations ensure that there is technology transfer with US industry. Working together, the collaborative teams are making rapid progress in solving the scientific and technical issues necessary for the commercialization of long lengths of practical high temperature superconductor wire and wire-using systems.

  12. 47{sup th} Annual meeting on nuclear technology (AMNT 2016). Key topic / Outstanding know-how and sustainable innovations

    Energy Technology Data Exchange (ETDEWEB)

    Schaffrath, Andreas [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH, Garching (Germany). Bereich Reaktorsicherheitsforschung

    2016-07-15

    Summary report on the Technical Session: ''Reactor Physics, Thermo- and Fluid-Dynamics'' of the 47th Annual Conference on Nuclear Technology (AMNT 2016) held in Hamburg, 10 to 12 May 2016. Other Sessions of AMNT 2016 will be covered in further issues of atw.

  13. 46th Annual meeting on nuclear technology (AMNT 2015). Key Topic / Enhanced safety and operation excellence / Radiation protection

    International Nuclear Information System (INIS)

    Summary report on the Focus Session 'Radiation Protection' of the 46th Annual Conference on Nuclear Technology (AMNT 2015) held in Berlin, 5 to 7 May 2015. Other Sessions of AMNT 2015 have been covered in atw 7 and 8 (2015) and will be covered in further issues of atw.

  14. Dietary effects of African walnut (Tetracarpidium conophorum) on the reproductive indices in male African catifsh (Clarias gariepinus) broodstock

    Institute of Scientific and Technical Information of China (English)

    Adekunle Dada; Oluwafunmilayo Aguda

    2015-01-01

    Objective:To investigate the effect of Tetracarpidium conophorum (T. conophorum) seed powder as dietary supplementation on the reproductive indices in male Clarias gariepinus (C. gariepinus) broodstocks. Methods:Fifteen outdoor concrete tanks consisting of triplicates for each treatment group were used. Triplicate groups of male C. gariepinus [(303.22 ± 1.89) g body weight] were fed with four diets supplemented T. conophorum seed powder respectively, a control diet without T. conophorum seed powder 2 times a day at 3%of body weight for 70 days. Male C. gariepinus broodstocks [average individual weight, (303.22 ± 1.89) g] were randomly distributed with density of 10 fish into 15 outdoor concrete tanks. At the end of the 70-day experiment, gonado-somatic index and reproductive indices were determined. Results:Fish fed experimental diets showed significantly improved gonado-somatic index and reproductive indices over the control treatment. Higher gonado-somatic index and reproductive indices were recorded for the fish fed diet of 200 mg/kg T. conophorum seed powder compared to other experimental diets. The results indicated that supplement diets with medicinal plant (T. conophorum) enhanced growth and improved gonadosomatic index, and reproductive indices of male C. gariepinus broodstocks. Conclusions:T. conophorum have a potential pro-fertility property which can be exploited in fish seed production by hatchery operators.

  15. Growth of Nile tilapia post-larvae from broodstock fed diet with different levels of digestible protein and digestible energy

    Directory of Open Access Journals (Sweden)

    Silia Maria de Negreiros Sousa

    2013-08-01

    Full Text Available This study was carried out to evaluate the influence of different levels of digestible energy and digestible protein in diets of Nile tilapia (Oreochromis niloticus broodstock on offspring growth during sex reversal stage. A total of 2,700 post-larvae (8.2±0.001 mg derived from breeders fed nine diets with distinct levels of digestible protein (28, 34 and 40% DP and digestible energy (2,800; 3,400; and 4,000 kcal DE.kg-1 were stored in twenty-seven 70 L tanks. After 30 days of growth, their average final weight (AFW, g, average weight gain (AWG, g, final standard length (SL, cm, condition factor (CF, specific growth rate (SGR, %/day, stock uniformity (UNI, %, survival (SUR, % and sex reversal rate (SRR, % were measured. Although female nutrition is thought to influence the performance or quality of progeny during early life stages, no influence of diets supplied to broodstock was detected on any parameter. Nonetheless, the offspring presented commercially satisfactory growth rates. Thus, diets containing 28% of digestible protein and 2,800 kcal of digestible energy.kg of diet-1 can be used to feed Nile tilapia broodstock without jeopardizing offspring performance during the sex reversal phase.

  16. Hydrothermal processing of Hanford tank waste. Organic destruction technology development task annual report -- FY 1993

    Energy Technology Data Exchange (ETDEWEB)

    Orth, R.J.; Schmidt, A.J.; Zacher, A.H. [and others

    1993-09-01

    Low-temperature hydrothermal processing (HTP) is a thermal-chemical autogenous processing method that can be used to destroy organics and ferrocyanide in Hanford tank waste at temperatures from 250 C to 400 C. With HTP, organics react with oxidants, such as nitrite and nitrate, already present in the waste. Ferrocyanides and free cyanide will hydrolyze at similar temperatures and may also react with nitrates or other oxidants in the waste. No air or oxygen or additional chemicals need to be added to the autogenous HTP system. However, enhanced kinetics may be realized by air addition, and, if desired, chemical reductants can be added to the system to facilitate complete nitrate/nitrate destruction. Tank waste can be processed in a plug-flow, tubular reactor, or a continuous-stirred tank reactor system designed to accommodate the temperature, pressure, gas generation, and heat release associated with decomposition of the reactive species. The work described in this annual report was conducted in FY 1993 for the Organic Destruction Technology Development Task of Hanford`s Tank Waste Remediation System (TWRS). This task is part of an overall program to develop organic destruction technologies originally funded by TWRS to meet tank safety and waste form disposal criteria and condition the feed for further pretreatment. During FY 1993 the project completed seven experimental test plans, a 30-hr pilot-scale continuous run, over 200 hr of continuous bench-scale HTP testing, and 20 batch HTP tests; two contracts were established with commercial vendors, and a commercial laboratory reactor was procured and installed in a glovebox for HTP testing with actual Hanford tank waste.

  17. Australian Nuclear Science and Technology Organisation (ANSTO). Annual Report 1998-1999

    International Nuclear Information System (INIS)

    The 1998/1999 Annual Report summarises ANSTO's performance and progress made on several major infrastructure projects and its research and development program. On 3 May 1999, the Government announced its support for a Replacement Research Reactor at Lucas Heights; the site licence has been granted by ARPANSA and the request for tender distributed to four pre qualified vendors. A significant effort during the year under review was directed towards the Replacement Research Reactor Project. Main objectives and achievements are also reported against established performance indicators within the the five core scientific business areas: International strategic relevance of Nuclear Science; Core nuclear facilities operation and development; Applications of Nuclear Science and Technology to the understanding of natural processes; Treatment and management of man-made and naturally occurring radioactive substances; and Competitiveness and ecological sustainability of industry. Also presented are the objectives and activities which supports the core scientific areas by providing best practice corporate support, safety management, information and human resource management for ANSTO staff. The organization has developed its 1999/2000 Operational Plan predominantly on a project-based approach

  18. Annual report of Nuclear Technology and Education Center. April 1, 2006 - March 31, 2007

    International Nuclear Information System (INIS)

    This annual report summarizes the activities of Nuclear Technology and Education Center (NuTEC) of Japan Atomic Energy Agency (JAEA) in the fiscal year 2006, which has started half a year after the unification of the training sections of JAERI and JNC. During this period, NuTEC has conducted its training activities as planned. The number of trainees completing the domestic training courses was 518, and that for staff technical training was 545. A 'Qualification course for the 3rd class radiation protection supervisor' has been newly implemented, and a trial 'Preparatory course for qualifying examination for professional engineer in the nuclear and radiation fields' has been held for the staff members. In addition, preparative work has been performed for opening some of the staff training courses to the public. International cooperation was also conducted as scheduled, and setting up new training sites at Ongkharak, Thailand and Dalat, Vietnam has been supported. Cooperation for Nuclear Professional School, School of Engineering, the University of Tokyo which opened in 2005, has been duly continued. (author)

  19. Snake River Fall Chinook Salmon Brood-Stock Program, 1981-1986 Final Report of Research.

    Energy Technology Data Exchange (ETDEWEB)

    Harrell, Lee W.

    1987-03-01

    The objective of the Snake River Fall Chinook Salmon Brood-stock Program was to hatch eggs from upriver stocks, rear the fish to spawning maturity, and use the resulting eggs for stock restoration in the Snake River. Approximately 15,000 eyed Snake River fall chinook salmon eggs were obtained each winter in 1981, 1982, 1983, and 1984 from various Columbia River hatcheries. Fish from these eggs were reared in dechlorinated City of Seattle water at the Northwest and Alaska Fisheries Center or in constant 10.5/degree/C groundwater at the University of Washington's Big Beef Creek Research Station. Seawater tolerance trials of 0+ age (3--5 months) juveniles in all four brood stocks were strongly suggestive of the 1+ age smoltification pattern of spring chinook salmon. Attempts to transfer 0+ age fish to marine net-pens at the Manchester Marine Experimental Station were unsuccessful during the four brood years. The only Snake River fall chinook salmon that demonstrated acceptable survival after 4 months residence in seawater were fish that were transferred as 1+ age smolts. After smolts were successfully transferred to seawater, losses were minimal for several months. However, in all Snake River chinook salmon stocks, mortality due to bacterial kidney disease (BKD) and a previously undescribed ''rosette disease'' resulted in very few maturing fish at 4 or 5 years of age. 5 refs., 7 figs.

  20. Broodstock management of the fine flounder Paralichthys adspersus (Steindachner, 1867 using recirculating aquaculture systems

    Directory of Open Access Journals (Sweden)

    Lili Carrera

    2013-03-01

    Full Text Available The present study describes the methodology used at IMARPE for the capture, acclimation and management of P. adspersus broodstock using recirculating aquaculture systems (RAS. RAS improved the water quality and maintained the environmental parameters during the acclimation period, temperature (17.2±1°C, oxygen (8.1±0.7 mg L-1, pH (7.3±0.2, ammonia (0.004±0.003 mg L-1, nitrite (0.52±0.2 mg L-1 and nitrate (3.45±2.6 mg L-1. Fish began to be fed normally from day 15 post-capture, once or twice a day using live fish (Odonthestes regia regia, Mugil cephalus, crustacean (Emerita analoga, fresh food (Engraulis ringens and Dosidicus gigas and artificial feed. A significant loss in the weight of the fish was registered during the first days of captivity, followed by a continuous increase in both sexes. The specific growth rate was positive from the third month of captivity, being the relative growth rate 24.5% and 16.2% in August 2010 in males and females, respectively. Different internal and external parasites were detected in the fish, being Entobdella sp. and Philometra sp. the prevailing parasites observed during samplings.

  1. Effect of broodstock density on reproduction and juvenile culture of green buffalo leech, Hirudinea manillensis

    Directory of Open Access Journals (Sweden)

    Zulhisyam Abdul Kari

    2015-10-01

    Full Text Available In this study, the effect of the broodstock density on reproduction and juvenile culture of green buffalo leech, Hirudinea manillensis was examined with six different densities (5, 10, 15, 20, 25, and 30 ind tank-1. The number of cocoons produced was significantly different among the different densities (p = 0.00 after three months of culture. Although hatching rate was not (p = 0.354, the average number of hatchings per cocoon was also significantly different (p<0.05 with 5 ind tank-1 gave the highest number (6.61±1. The 25 ind tank-1 produced the highest mortality of parent leeches (67±13.16%. According to their length and diameter, the sizes of the cocoons were not significantly different among the treatments, with the 5 ind tank-1 having the largest cocoon of 22.19±0.92 mm and 13.25±0.07 mm, respectively. The wet weight of cocoons was significantly different at p<0.05 with the 5 ind tank-1 producing the heaviest cocoons of 1.26±0.11g compared to the 25 ind tank-1producing the lightest cocoons of 0.22±0.38 g.

  2. Annual energy yield of different photovoltaic technologies at different climatic conditions; Jahresenergieertraege unterschiedlicher Photovoltaik-Technologien bei verschiedenen klimatischen Bedingungen

    Energy Technology Data Exchange (ETDEWEB)

    Zinsser, Bastian

    2010-10-04

    It is very important for engineers as well as for investors to know which amount of energy E [kWh] a photovoltaic (PV) system produces under real operating conditions. In most cases the costs [Euroct/kWh] for the solar electricity are the main question. Most data sheets contain the efficiency of the PV modules only for standard test conditions (STC) in the laboratory. In reality higher module temperatures, lower irradiation G and a modified spectrum of the irradiation G change the standard test conditions efficiency. However, standard test conditions never appear at real live in Germany. In southern countries, which have more sun, the operation conditions differ much more from standard test conditions. Therefore, the effects on the annual energy yield are even bigger. To answer the question which PV technology gives the highest energy yield at specific climate conditions, this thesis set up thirteen PV systems using different technologies in Stuttgart, Nicosia, and Cairo. An extensive data acquisition is added to monitor weather and system data. Mono- and multicrystalline silicon (Si) as well as several thin film technologies like amorphous silicon, Cu(InGa)Se{sub 2} (CIGS), and CdTe are investigated. First the thesis extracts the temperature and low light behavior from the measured field data. At the end it models the PV systems to forecast the annual energy yield EJahr and compares with the measured values. The analysis of the field data reconfirms the better temperature behavior of the thin film technologies reported in literature. The HIT technology exhibits a better low light behavior, than the crystalline Si technologies, which all show a similar low light behavior. In the field the CIGS technology shows a contrary low light behavior compared to the laboratory. Field data show, that amorphous Si and CdTe technologies have a much better low light behavior than the crystalline Si technologies. The tolerances of the nominal power PSTC have the biggest influence

  3. 46{sup th} Annual meeting on nuclear technology (AMNT 2015). Key topic / Decommissioning experience and waste management solutions

    Energy Technology Data Exchange (ETDEWEB)

    Buettner, Klaus [NUKEM Technologies Engineering Systems GmbH, Alzenau (Germany). Process Engineering; Klute, Stefan [BKW Energie AG, Bern (Switzerland). Decommissioning Project KKM

    2015-12-15

    Summary report on the Topical Sessions ''Radioactive Waste Management, Storage and Disposal'' and ''Decommissioning of Nuclear Facilities - Challenges and Solutions'' of the 46{sup th} Annual Conference on Nuclear Technology (AMNT 2015) held in Berlin, 5 to 7 May 2015. Other Sessions of AMNT 2015 have been covered in atw 7 to 11 (2015) and will be covered in further issues of atw.

  4. MHD Technology Transfer, Integration and Review Committee. Fifth semi-annual status report, April 1990--September 1990

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    This fifth semi-annual status report of the MHD Technology Transfer, Integration, and Review Committee (TTIRC) summarizes activities of the TTIRC during the period April 1990 through September 1990. It includes summaries and minutes of committee meetings, progress summaries of ongoing Proof-of-Concept (POC) contracts, discussions pertaining to technical integration issues in the POC program, and planned activities for the next six months.

  5. 46{sup th} annual meeting on nuclear technology (AMNT 2015). Key topic / Enhanced safety and operation excellence

    Energy Technology Data Exchange (ETDEWEB)

    Traichel, Anke [NUKEM Technologies, Alzenau (Germany). Department of Safety Engineering and Assessment/Proposals Engineering

    2016-02-15

    Summary report on the Technical Session ''Operation and Safety of Nuclear Installations, Fuel - Special Issues'' of the 46{sup th} Annual Conference on Nuclear Technology (AMNT 2015) held in Berlin, 5 to 7 May 2015. Other Sessions of AMNT 2015 have been covered in atw 7 to 12 (2015), 1 (2016) and will be covered in further issues of atw.

  6. 46th Annual meeting on nuclear technology (AMNT 2015). Key topic / Decommissioning experience and waste management solutions

    International Nuclear Information System (INIS)

    Summary report on the Topical Sessions ''Radioactive Waste Management, Storage and Disposal'' and ''Decommissioning of Nuclear Facilities - Challenges and Solutions'' of the 46th Annual Conference on Nuclear Technology (AMNT 2015) held in Berlin, 5 to 7 May 2015. Other Sessions of AMNT 2015 have been covered in atw 7 to 11 (2015) and will be covered in further issues of atw.

  7. "Research to Improve the Efficacy of Captive Broodstock Programs and Advance Hatchery Reform Throughout the Columbia River Basin." [from the Abstract], 2008-2009 Progress Report.

    Energy Technology Data Exchange (ETDEWEB)

    Berejikian, Barry A. [National Oceanic and Atmospheric Administration, National Marine Fisheries Service

    2009-08-18

    This project was developed to conduct research to improve the efficacy of captive broodstock programs and advance hatchery reform throughout the Columbia River Basin. The project has three objectives: (1) maintain adaptive life history characteristics in Chinook salmon, (2) improve imprinting in juvenile sockeye salmon, and (3) match wild phenotypes in Chinook and sockeye salmon reared in hatcheries. A summary of the results are as follows: Objective 1: The ratio of jack to adult male Chinook salmon were varied in experimental breeding populations to test the hypothesis that reproductive success of the two male phenotypes would vary with their relative frequency in the population. Adult Chinook salmon males nearly always obtained primary access to nesting females and were first to enter the nest at the time of spawning. Jack male spawning occurred primarily by establishing satellite positions downstream of the courting pair, and 'sneaking' into the nest at the time of spawning. Male dominance hierarchies were fairly stable and strongly correlated with the order of nest entry at the time of spawning. Observed participation in spawning events and adult-to-fry reproductive success of jack and adult males was consistent with a negative frequency-dependent selection model. Overall, jack males sired an average of 21% of the offspring produced across a range of jack male frequencies. Implications of these and additional findings on Chinook salmon hatchery broodstock management will be presented in the FY 2009 Annual Report. Objective 2: To determine the critical period(s) for imprinting for sockeye salmon, juvenile salmon were exposed to known odorants at key developmental stages. Molecular assessments of imprinting-induced changes in odorant receptor gene expression indicated that regulation of odorant expression is influenced by developmental status and odor exposure history. Expression levels of basic amino acid receptor (BAAR) mRNA in the olfactory

  8. MHD Technology Transfer, Integration and Review Committee. Seventh semi-annual status report, April 1991--September 1991

    Energy Technology Data Exchange (ETDEWEB)

    1993-02-01

    This seventh semi-annual status report of the MHD Technology Transfer, Integration and Review Committee (TTIRC) summarizes activities of the TTIRC during the period April 1991 through September 1991. It includes a summary and minutes of the General Committee meeting, progress summaries of ongoing POC contracts, discussions pertaining to technical integration issues in the POC program, and planned activities for the next six months. The meeting included test plan with Western coal, seed regeneration economics, power management for the integrated topping cycle and status of the Clean Coal Technology Proposal activities. Appendices cover CDIF operations HRSR development, CFFF operations etc.

  9. Tucannon River Spring Chinook Salmon Captive Brood Program, FY 2000 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Bumgarner, Joseph D.; Gallinat, Michael P.

    2001-06-01

    This report summarizes the objectives, tasks, and accomplishments of the Tucannon River spring chinook captive brood program from program inception (1997) through April 2001. The WDFW initiated a captive broodstock program in 1997. The overall goal of the Tucannon River captive broodstock program is for the short-term, and eventually long-term, rebuilding of the Tucannon River spring chinook salmon run, with the hope that natural production will eventually sustain itself. The project goal is to rear captive salmon to adults, spawn them, rear their progeny, and release approximately 150,000 smolts annually into the Tucannon River between 2003-2007. These smolt releases, in combination with the current hatchery supplementation program (132,000 smolts), and wild production, is expected to produce 600-700 returning adult spring chinook to the Tucannon River each year from 2005-2010. The Master Plan, Environmental Assessment, and most facility modifications at LFH were completed for the Tucannon River spring chinook captive broodstock program during FY2000 and FY2001. DNA samples collected since 1997 have been sent to the WDFW genetics lab in Olympia for baseline DNA analysis. Results from the genetic analysis are not available at this time. The captive broodstock program is planned to collect fish from five (1997-2001) brood years (BY). The captive broodstock program was initiated with 1997 BY juveniles, and the 2000 BY fish have been selected. As of April 30, 2001, WDFW has 172 BY 1997, 262 BY 1998, 407 BY 1999, and approximately 1,190 BY 2000 fish on hand at LFH. Twelve of 13 mature 97 BY females were spawned in 2000. Total eggtake was 14,813. Mean fecundity was 1,298 eggs/female based on 11 fully spawned females. Egg survival to eye-up was 47.3%. This low survival was expected for three year old captive broodstock females. As of April 30, 2001, WDFW has 4,211 captive broodstock progeny on hand. These fish will be tagged with blank wire tag without fin clips and

  10. Opening speech annual meeting on nuclear technology 2013, 14 to 16 May 2013, Berlin, Germany

    Energy Technology Data Exchange (ETDEWEB)

    Gueldner, Ralf [Deutsches Atomforum e.V. (DAtF), Berlin (Germany)

    2013-07-15

    Germany is an important location for nuclear technology also in the face of the 'Energiewende'. Our industry is not merely the object of political decisions, but it also continues to make its reliable and safe contribution to supplying energy and to this country's prosperity. The 9 nuclear power plants connected to the grid are a pillar of the energy supply especially for baseload generation, with an installed power of 12,700 MW at an average availability of over 90 %. With almost 100 billion kilowatt hours generated annually, they contributed 1/6 of the electricity generated in Germany in 2012 and made Germany the second largest nuclear power producer in the European Union. The nuclear power plants ensure, as do the other large power plants, the regional voltage and frequency stability and with their good controllability and the large standard service volume make an important contribution to integrating the production of electricity from renewables which is very high by international comparison. Nuclear technology in Germany is not restricted to the dismantling, final storage and remaining operations of plants, but rather it is made up of a vigorous, competitive nuclear industry that is among the best in the world. That does not merely show in the ranking of the nuclear power plants with the highest output rates, which placed 4 German plants in the top ten in the world also in 2012. It also becomes apparent when nuclear technology Made in Germany is sought after all over the world, in particular where the level of safety is concerned, e.g. worldwide in improving the safety of plants after the accident at Fukushima. Quite a number of safety components that are just being ordered elsewhere have been tried and tested for years already in Germany, and are supplied, installed and serviced by German suppliers and service providers. The broad range of the nuclear industry in Germany and its backing in a diverse research landscape means that the products

  11. Proceedings of the 2011 hydrocarbon annual days - Innovation, technological and human challenges

    International Nuclear Information System (INIS)

    This document gathers the available presentations (slides) given at the 2011 issue of the annual hydrocarbon days. The conference comprises 14 workshops and 5 plenary sessions dealing with: - Plenary 1 - oil and gas and the evolution of the world energy landscape: The new geopolitical energy landscape (Lesourne, J.); Macondo and Fukushima: what challenges for the industry and for Total? (Mosconi, J.J.); Natural gas: energy of the 21. century? (Bensasson, B.); - Workshop 1 - innovation in modeling, computer science and calculations: Tools at the engineering service - 3D visualisation mock-ups (Hoffert, J.L.; Bouget, F.); Basins modelling (Facon, J.); 'OCEAN' computer platform and calculation modules development (Dury, V.); - Workshop 2 - source rock hydrocarbons: Exploration-production (B. Courme); Aquifers monitoring technology (Lallier, S.); Hydraulic fracturing of schists (Faucompret, N.); - Workshop 3 - research, universities and industries, the innovating process: presentation of ANCRE actions - situation of research (Goffe, B.); Artificial photosynthesis - using solar energy for hydrogen and fuels production (Artero, V.); Partnership and competitiveness (Valadier, L.); - workshop 4 - marine innovations, new ships: new building ships for ultra-deep offshore and big pipelines (Ardavanis, K.); The Seven Borealis, a World-Class Strategic Enabler (Bost, F.); Application of innovation utilizing the Skandi Arctic through the use of the Pipeline Repair System (PRS) and the Personal Diving Equipment (PDE) (Grosjean, P.); - Workshop 5 - innovative Subsea equipments: Subsea: Way to Future - Fully Autonomous Plant (Riviere, L.); The 2. Generation DC All-Electric Subsea Production Control System (Van der Akker, J.); The power distribution module: an essential component in the submarine production chain (Eschbach, J.L.); Reeled installation of EHTF - Electrically Heat Traced Pipe-in-Pipe (Mair, J.); - Workshop 6 - seismic imaging: Towed streamer seismic strategies for sub

  12. Grande Ronde Basin Chinook Salmon Captive Brood and Conventional Supplementation Programs, 2003 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Hoffnagle, Timothy L.; Hair, Don; Carmichael, Richard W. (Oregon Department of Fish and Wildlife, La Grande, OR)

    2004-07-01

    BPA Fish and Wildlife Program Project Number 1998-01-001 provides funding for the Grande Ronde Basin Spring Chinook Salmon Captive Broodstock Program. This report satisfies the requirement that an annual report be submitted for FY 2003. The Grande Ronde Basin Spring Chinook Salmon Captive Broodstock Project is designed to rapidly increase numbers of salmon in stocks that are in imminent danger of extirpation. Parr are captured in Catherine Creek, upper Grande Ronde River and Lostine River and reared to adulthood in captivity. Upon maturation, these fish are spawned (within stocks) and their progeny reared to smoltification before being released into the natal stream of their parents. This program is co-managed by ODFW, National Marine Fisheries Service, Nez Perce Tribe and Confederated Tribes of the Umatilla Indian Reservation. This report covers activities conducted and provides data analyses for the Grande Ronde Spring Chinook Salmon Captive broodstock Program from 1 January--31 December 2003. Since the fiscal year ends in the middle of the spawning period, an annual report based on calendar year is more logical. This document is the FY 2003 annual report. Detailed information on historic and present population status, project background, goals and objectives, significance to regional programs and relationships to other programs, methods and previous results are available in the 1995-2002 Project Status Report (Hoffnagle et al 2003).

  13. Grande Ronde Basin Spring Chinook Salmon Captive Broodstock Program, 1995-2002 Summary Report.

    Energy Technology Data Exchange (ETDEWEB)

    Hoffnagle, Timothy; Carmichael, Richard; Noll, William

    2003-12-01

    survey areas in 1995 from as high as 1,205 redds in the same area in 1969 (Table 1). All streams reached low points (0-6 redds in the index areas) in the 1990's, except those in which no redds were found for several years and surveys were discontinued, such as Spring, Sheep and Indian creeks which had a total of 109 redds in 1969. The Minam and Wenaha rivers are tributaries of the Grande Ronde River located primarily in wilderness areas. Chinook salmon numbers in these two streams (based on redd counts) also decreased dramatically beginning in the early 1970's (Table 1). Since then there have been a few years of increasing numbers of redds but counts have generally been 25-40% of the number seen in the 1960's. No hatchery fish have been released into either of these streams and we monitor them during spawning ground surveys for the presence of hatchery strays. These populations will be used as a type of control for evaluating our supplementation efforts in Catherine Creek, upper Grande Ronde River and Lostine River. In this way, we can attempt to filter out the effects of downstream variables, over which we have no control, when we interpret the results of the captive broodstock program as the F1 and F2 generations spawn and complete their life cycles in the wild. The Grande Ronde Basin Captive Broodstock Program was initiated because these chinook salmon populations had reached critical levels where dramatic and unprecedented efforts were needed to prevent extinction and preserve any future options for use of endemic fish for artificial propagation programs for recovery and mitigation. This program was designed to quickly increase numbers of returning adults, while maintaining the genetic integrity of each endemic population.

  14. Implications of Technology for Teaching and Learning. Annual Professional Education Seminar of Central States Colleges and Universities (3rd, November, 1967).

    Science.gov (United States)

    Woodruff, Asahel; Froyen, Len

    This report of the proceedings of the 3rd Annual Professional Education Seminar of the Central States Colleges and Universities centers upon the implications of technology for teaching and learning and contains addresses delivered, including "Some Concerns Related to Technology in Education," by Len Froyen; and "Implications of Technology for…

  15. Geothermal technology development program. Annual progress report, October 1980-September 1981

    Energy Technology Data Exchange (ETDEWEB)

    Kelsey, J.R. (ed.)

    1982-09-01

    The status of ongoing Research and Development (R and D) within the Geothermal Technology Development Program is described. The program emphasizes research in rock penetration mechanics, fluid technology, borehole mechanics, and diagnostics technology.

  16. Development of Pedigree Classification Using Microsatellite and Mitochondrial Markers for Giant Grouper Broodstock (Epinephelus lanceolatus Management in Taiwan

    Directory of Open Access Journals (Sweden)

    Hsiao-Che Kuo

    2014-04-01

    Full Text Available Most giant groupers in the market are derived from inbred stock. Inbreeding can cause trait depression, compromising the animals’ fitness and disease resistance, obligating farmers to apply increased amounts of drugs. In order to solve this problem, a pedigree classification method is needed. Here, microsatellite and mitochondrial DNA were used as genetic markers to analyze the genetic relationships among giant grouper broodstocks. The 776-bp fragment of high polymorphic mitochondrial D-loop sequence was selected for measuring sibling relatedness. In a sample of 118 giant groupers, 42 haplotypes were categorized, with nucleotide diversity (π of 0.00773 and haplotype diversity (HD of 0.983. Furthermore, microsatellites were used for investigation of parentage. Six out of 33 microsatellite loci were selected as markers based on having a high number of alleles and compliance with Hardy-Weinberg equilibrium. Microsatellite profiles based on these loci provide high variability with low combined non-exclusion probability, permitting practical use in aquaculture. The method described here could be used to improve grouper broodstock management and lower the chances of inbreeding. This approach is expected to lead to production of higher quality groupers with higher disease resistance, thereby reducing the need for drug application.

  17. Development of pedigree classification using microsatellite and mitochondrial markers for Giant grouper broodstock (Epinephelus lanceolatus) management in Taiwan.

    Science.gov (United States)

    Kuo, Hsiao-Che; Hsu, Hao-Hsuan; Chua, Chee Shin; Wang, Ting-Yu; Chen, Young-Mao; Chen, Tzong-Yueh

    2014-04-30

    Most giant groupers in the market are derived from inbred stock. Inbreeding can cause trait depression, compromising the animals' fitness and disease resistance, obligating farmers to apply increased amounts of drugs. In order to solve this problem, a pedigree classification method is needed. Here, microsatellite and mitochondrial DNA were used as genetic markers to analyze the genetic relationships among giant grouper broodstocks. The 776-bp fragment of high polymorphic mitochondrial D-loop sequence was selected for measuring sibling relatedness. In a sample of 118 giant groupers, 42 haplotypes were categorized, with nucleotide diversity (π) of 0.00773 and haplotype diversity (HD) of 0.983. Furthermore, microsatellites were used for investigation of parentage. Six out of 33 microsatellite loci were selected as markers based on having a high number of alleles and compliance with Hardy-Weinberg equilibrium. Microsatellite profiles based on these loci provide high variability with low combined non-exclusion probability, permitting practical use in aquaculture. The method described here could be used to improve grouper broodstock management and lower the chances of inbreeding. This approach is expected to lead to production of higher quality groupers with higher disease resistance, thereby reducing the need for drug application.

  18. Improving restoration of exotic annual grass-invaded rangelands through activated carbon seed enhancement technologies

    Science.gov (United States)

    Cost-efficient strategies for revegetating annual grass-infested rangelands are limited. Restoration efforts typically comprise a combination of pre-emergent herbicide treatments and seeding to restore desired plant materials. However, practitioners struggle with applying herbicide at rates sufficie...

  19. The Third Annual Deep Brain Stimulation Think Tank: A Review of Emerging Issues and Technologies

    OpenAIRE

    P. Justin eRossi; Aysegul eGunduz; Jack eJudy; Linda eWilson; Andre eMachado; James J Giordano; W. Jeff eElias; Alterman, Ron L.; Rossi, Marvin A.; Butson, Christopher L.; Fox, Michael D.; McIntyre, Cameron C.; Nader ePouratian; Swann, Nicole C.; Coralie ede Hemptinne

    2016-01-01

    This review summarizes the most contemporary clinical, electrophysiological, imaging, and computational work on DBS for the treatment of neurological and neuropsychiatric disease. Significant innovations of the past year are emphasized; these advances were presented at the 3rd Annual Deep Brain Stimulation Think Tank. The Think Tank’s contributors represent a unique multidisciplinary ensemble of expert neurologists, neurosurgeons, neuropsychologists, psychiatrists, scientists, engineers, and ...

  20. Compilation of contract research for the Materials Engineering Branch, Division of Engineering Technology. Annual report for FY 1984. Volume 3

    International Nuclear Information System (INIS)

    This compilation of annual reports by contractors to the Materials Engineering Branch of the NRC Office of Research, concentrates on achievments in safety research for the primary system of commercial light water power reactors, particularly with regard to reactor vessels, primary system piping, steam generators and for non-destructive examination of primary system components. This report, covering research conducted during Fiscal Year 1984, is the third volume of the series of NUREG-0975, compilation of Contractor Research for the Materials Engineering Branch, Division of Engineering Technology

  1. Compilation of contract research for the Materials Engineering Branch, Division of Engineering Technology. Annual report for FY 1985. Volume 4

    International Nuclear Information System (INIS)

    The compilation of annual reports by contractors to the Materials Engineering Branch of the NRC Office of Research, concentrates on achievements in safety research for the primary system of commercial light water power reactors, particularly with regard to reactor vessels, primary system piping, steam generators and for non-destructive examination of primary system components. This report, covering research conducted during Fiscal Year 1985, is the fourth volume of the series of NUREG-0975, Compilation of Contractor Research for the Materials Engineering Branch, Division of Engineering Technology

  2. Proceedings of the Third Annual Deep Brain Stimulation Think Tank: A Review of Emerging Issues and Technologies.

    Science.gov (United States)

    Rossi, P Justin; Gunduz, Aysegul; Judy, Jack; Wilson, Linda; Machado, Andre; Giordano, James J; Elias, W Jeff; Rossi, Marvin A; Butson, Christopher L; Fox, Michael D; McIntyre, Cameron C; Pouratian, Nader; Swann, Nicole C; de Hemptinne, Coralie; Gross, Robert E; Chizeck, Howard J; Tagliati, Michele; Lozano, Andres M; Goodman, Wayne; Langevin, Jean-Philippe; Alterman, Ron L; Akbar, Umer; Gerhardt, Greg A; Grill, Warren M; Hallett, Mark; Herrington, Todd; Herron, Jeffrey; van Horne, Craig; Kopell, Brian H; Lang, Anthony E; Lungu, Codrin; Martinez-Ramirez, Daniel; Mogilner, Alon Y; Molina, Rene; Opri, Enrico; Otto, Kevin J; Oweiss, Karim G; Pathak, Yagna; Shukla, Aparna; Shute, Jonathan; Sheth, Sameer A; Shih, Ludy C; Steinke, G Karl; Tröster, Alexander I; Vanegas, Nora; Zaghloul, Kareem A; Cendejas-Zaragoza, Leopoldo; Verhagen, Leonard; Foote, Kelly D; Okun, Michael S

    2016-01-01

    The proceedings of the 3rd Annual Deep Brain Stimulation Think Tank summarize the most contemporary clinical, electrophysiological, imaging, and computational work on DBS for the treatment of neurological and neuropsychiatric disease. Significant innovations of the past year are emphasized. The Think Tank's contributors represent a unique multidisciplinary ensemble of expert neurologists, neurosurgeons, neuropsychologists, psychiatrists, scientists, engineers, and members of industry. Presentations and discussions covered a broad range of topics, including policy and advocacy considerations for the future of DBS, connectomic approaches to DBS targeting, developments in electrophysiology and related strides toward responsive DBS systems, and recent developments in sensor and device technologies. PMID:27092042

  3. The National Energy Technology Laboratory Annual Site Environmental Report for Calendar Year 2001

    International Nuclear Information System (INIS)

    No significant environmental problems were identified at the National Energy Technology Laboratory (NETL) sites in Morgantown (MGN), Pittsburgh (PGH), Tulsa (NPTO) and Fairbanks (AEO) during 2001. No radionuclides were released from the sites during 2001. The sites maintain two major environmental programs: waste management, and environmental media and release management. These two programs encompass waste handling, storage, and disposal, waste minimization and pollution prevention, air quality emissions, surface-water discharges, groundwater impacts, industrial wastewater discharges, and spill control procedures. The Morgantown and Pittsburgh sites currently maintain complete monitoring programs for groundwater, stormwater discharge, laboratory wastewater discharge, and meteorological data. In addition, an annual air emissions inventory is prepared. A comprehensive Directives Program aimed at managing environmental, safety, health requirements, and risks was initiated in 1997, continued through subsequent years, and will be completed in 2003. The primary objective of the program is to identify and implement standards that will protect the health and safety of workers, public, and the environment. This program started with a careful and thorough analysis of risks confronting workers and the communities surrounding NETL sites. Following this analysis, requirements and best management practices were evaluated to determine how requirements could best be used to advance the mission of NETL. Teams of subject-matter experts analyzed the work assigned to determine potential hazards and identify ways to remove or control those hazards. In 2001, NETL developed or revised a series of directives in two major areas: safety analysis and review (SAR) processes, and integrated safety management (ISM) directives. SAR directives were issued for research and development (R andD) operations, support operations, and facilities. ISM directives were released on management processes

  4. The National Energy Technology Laboratory Annual Site Environmental Report for Calendar Year 2001

    Energy Technology Data Exchange (ETDEWEB)

    National Energy Technology Laboratory

    2002-10-01

    No significant environmental problems were identified at the National Energy Technology Laboratory (NETL) sites in Morgantown (MGN), Pittsburgh (PGH), Tulsa (NPTO) and Fairbanks (AEO) during 2001. No radionuclides were released from the sites during 2001. The sites maintain two major environmental programs: waste management, and environmental media and release management. These two programs encompass waste handling, storage, and disposal, waste minimization and pollution prevention, air quality emissions, surface-water discharges, groundwater impacts, industrial wastewater discharges, and spill control procedures. The Morgantown and Pittsburgh sites currently maintain complete monitoring programs for groundwater, stormwater discharge, laboratory wastewater discharge, and meteorological data. In addition, an annual air emissions inventory is prepared. A comprehensive Directives Program aimed at managing environmental, safety, health requirements, and risks was initiated in 1997, continued through subsequent years, and will be completed in 2003. The primary objective of the program is to identify and implement standards that will protect the health and safety of workers, public, and the environment. This program started with a careful and thorough analysis of risks confronting workers and the communities surrounding NETL sites. Following this analysis, requirements and best management practices were evaluated to determine how requirements could best be used to advance the mission of NETL. Teams of subject-matter experts analyzed the work assigned to determine potential hazards and identify ways to remove or control those hazards. In 2001, NETL developed or revised a series of directives in two major areas: safety analysis and review (SAR) processes, and integrated safety management (ISM) directives. SAR directives were issued for research and development (R&D) operations, support operations, and facilities. ISM directives were released on management processes, such

  5. 7. Annual seminar of the scientific initiation of the Center for Development of Nuclear Technology. Abstracts

    International Nuclear Information System (INIS)

    This seminar presents the Scientific Initiation Program developed at the CDTN - Brazilian Center for the Development of Nuclear Technology and focuses on activities of the sectors of: radiopharmaceutical production; radiation applied to health; waste management; structural integrity; environment; nanotechnology and nuclear materials; reactor technology; mineral technology; reactor and analytical techniques

  6. 76 FR 71048 - Sixth Annual Philip S. Chen, Jr. Distinguished Lecture on Innovation and Technology Transfer

    Science.gov (United States)

    2011-11-16

    ... Innovation and Technology Transfer AGENCY: National Institutes of Health, Public Health Service, HHS. ACTION....D. Distinguished Lecture on Innovation and Technology Transfer. DATES: Friday, December 9, 2011, at... Recombinant Immunotoxins: From Technology Transfer to the Patient.'' Dr. Pastan is an NIH...

  7. Research Advances in Functions of Vitamins on Broodstock Nutrition%维生素在亲鱼营养中的研究进展

    Institute of Scientific and Technical Information of China (English)

    肖登元; 梁萌青

    2012-01-01

    As essential micronutrients for fish, vitamins play a very important role in broodstock nutrition. This article summarized the research results of vitamin nutrition in broodstock in recent several decades, and elabora-ted on the physiological role of fat-soluble vitamins and water-soluble vitamins in terms of the broodstock' s go-nad development, fecundity, quality of sperm and ovum, embryo developments and larval survival rate. The article also explained the physiological function of vitamins A, C and E in detail on the broodstock nutrition.%维生素作为鱼类必不可少的微量营养素,其在亲鱼营养中占有非常重要的地位.本文总结了近几十年亲鱼的维生素营养研究成果,阐述了脂溶性维生素和水溶性维生素在亲鱼性腺发育、繁殖力、精卵质量、胚胎发育和仔鱼成活率等方面的生理作用,其中对维生素A、维生素C、维生素E的生理作用进行了较为详尽的阐明.

  8. The Historically Black Colleges and Universities/Minority Institutions Environmental Technology Consortium annual report draft, 1995--1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-07-01

    The HBCU/MI ET Consortium was established in January 1990, through a memorandum of Understanding (MOU) among its member institutions. This group of research-oriented Historically Black Colleges and Universities and Minority Institutions (HBCUs/MIs) agreed to work together to initiate or revise educational programs, develop research partnerships with public and private sector organizations, and promote technology development and transfer to address the nation`s critical environmental problems. While the Consortium`s Research, Education and Technology Transfer (RETT) Plan is the cornerstone of its overall program efforts, the initial programmatic activities of the Consortium focused on environmental education at all levels with the objective of addressing the underrepresentation of minorities in the environmental professions. This 1996 Annual Report provides an update on the activities of the Consortium with a focus on environmental curriculum development for the Technical Qualifications Program (TQP) and Education for Sustainability.

  9. Effects of aqueous effluents from in situ fossil fuel processing technologies on aquatic systems. Annual progress report

    Energy Technology Data Exchange (ETDEWEB)

    Bergman, H.L.; Anderson, A.D.

    1977-12-01

    This is the first annual report issued under a project to evaluate the effects of aqueous effluents from in-situ fossil fuel processing technologies on aquatic biota. Briefly, the goals of the project are to: evaluate the toxicity of process water effluents on aquatic biota; recommend maximum exposure concentrations for process water constituents; and assist DOE in using project data and recommendations to design control technologies and to assess environmental impacts. The project objectives for Year 1 were pursued through the following five tasks: a literature review on process water constituents; toxicity studies on the effect of process waters and six process water constituents on aquatic biota; degradation rate studies on four to six process water constituents; bioaccumulation studies on four to six process water constituents; and recommendations on maximum exposure concentrations for process water constituents based on data from the project and from the literature. Progress toward completion of these goals is presented.

  10. Geothermal drilling ad completion technology development program. Semi-annual progress report, April-September 1979

    Energy Technology Data Exchange (ETDEWEB)

    Varnado, S.G. (ed.)

    1980-05-01

    The progress, status, and results of ongoing Research and Development (R and D) within the Geothermal Drilling and Completion Technology Development Program are described. The program emphasizes the development of geothermal drilling hardware, drilling fluids, and completion technology. Advanced drilling systems are also under development. The goals of the program are to develop the technology required to reduce well costs by 25% by 1982 and by 50% by 1986.

  11. Geothermal drilling and completion technology development program. Annual progress report, October 1979-September 1980

    Energy Technology Data Exchange (ETDEWEB)

    Varnado, S.G. (ed.)

    1980-11-01

    The progress, status, and results of ongoing research and development (R and D) within the Geothermal Drilling and Completion Technology Development Program are described. The program emphasizes the development of geothermal drilling hardware, drilling fluids, completion technology, and lost circulation control methods. Advanced drilling systems are also under development. The goals of the program are to develop the technology required to reduce well costs by 25% by 1983 and by 50% by 1987.

  12. 1997 Annual report. Technological Research Direction; Informe Anual 1997. Direccion de Investigacion Tecnologica

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    This document describes the results for one year of work. Here is presented the goals of the Technological Research Direction of the National Institute of Nuclear Research in Mexico, which is promoting and developing the production of high technologies in the nuclear sciences and related disciplines as well as to generate the technologies, products, quality insume for academic organizations, health, industrial and commercial that are required. (Author)

  13. "The Success of Captive Broodstock Programs Depends on High In-Culture Survival, ..." [from the Abstract], 2006-2007 Progress Report.

    Energy Technology Data Exchange (ETDEWEB)

    Berejikian, Barry A. [National Marine Fisheries Service

    2009-04-08

    The success of captive broodstock programs depends on high in-culture survival, appropriate development of the reproductive system, and the behavior and survival of cultured salmon after release, either as adults or juveniles. Continuing captive broodstock research designed to improve technology is being conducted to cover all major life history stages of Pacific salmon. Accomplishments detailed in this report are listed below by major objective. Objective 1: This study documented that captively reared Chinook exhibited spawn timing similar to their founder anadromous population. An analysis of spawn timing data of captively reared Chinook salmon that had received different levels of antibiotic treatment did not suggest that antibiotic treatments during the freshwater or seawater phase of the life cycle affects final maturation timing. No effect of rearing density was found with respect to spawn timing or other reproductive behaviors. Objective 2: This study investigated the critical period(s) for imprinting for sockeye salmon by exposing juvenile salmon to known odorants at key developmental stages. Molecular assessments of imprinting-induced changes in odorant receptor gene expression indicated that regulation of odorant expression differs between coho and sockeye salmon. While temporal patterns differ between these species, exposure to arginine elicited increases in odorant receptor mRNA expression in sockeye salmon. Objective 3: This study: (i) identified the critical period when maturation is initiated in male spring Chinook salmon and when body growth affects onset of puberty, (ii) described changes in the reproductive endocrine system during onset of puberty and throughout spermatogenesis in male spring Chinook salmon, (iii) found that the rate of oocyte development prior to vitellogenesis is related to body growth in female spring Chinook, and (iv) demonstrated that growth regimes which reduce early (age 2) male maturation slow the rate of primary and early

  14. Fusion technology development annual report, October 1, 1995--September 30, 1996

    International Nuclear Information System (INIS)

    In FY96, the General Atomics (GA) Fusion Group made significant contributions to the technology needs of the magnetic fusion program. The work is reported in the following sections on Fusion Power Plant Design Studies (Section 2), Plasma Interactive Materials (Section 3), SiC/SiC Composite Material Development (Section 4), Magnetic Diagnostic Probes (Section 5) and RF Technology (Section 6). Meetings attended and publications are listed in their respective sections. The overall objective of GA's fusion technology research is to develop the technologies necessary for fusion to move successfully from present-day physics experiments to ITER and other next-generation fusion experiments, and ultimately to fusion power plants. To achieve this overall objective, the authors carry out fusion systems design studies to evaluate the technologies needed for next-step experiments and power plants, and they conduct research to develop basic knowledge about these technologies, including plasma technologies, fusion nuclear technologies, and fusion materials. They continue to be committed to the development of fusion power and its commercialization by US industry

  15. Instructional Technology. Symposium 18. [Concurrent Symposium Session at AHRD Annual Conference, 2000.

    Science.gov (United States)

    2000

    Three presentations are provided from Symposium 18, Instructional Technology, of the Academy of Human Resource Development (HRD) 2000 Conference Proceedings. "Strategies for Facilitating Interaction When Using Technology-Mediated Training Methods [TMTM]" (Jeffrey S. Lewis, Gary D. Geroy, Orlando Griego) focuses on differences between face-to-face…

  16. UNITED STATES DEPARTMENT OF ENERGY OFFICE OF ENVIRONMENTAL MANAGEMENT WASTE PROCESSING ANNUAL TECHNOLOGY DEVELOPMENT REPORT 2008

    Energy Technology Data Exchange (ETDEWEB)

    Bush, S.

    2009-11-05

    The Office of Waste Processing identifies and reduces engineering and technical risks and uncertainties of the waste processing programs and projects of the Department of Energy's Environmental Management (EM) mission through the timely development of solutions to technical issues. The risks, and actions taken to mitigate those risks, are determined through technology readiness assessments, program reviews, technology information exchanges, external technical reviews, technical assistance, and targeted technology development and deployment. The Office of Waste Processing works with other DOE Headquarters offices and project and field organizations to proactively evaluate technical needs, identify multi-site solutions, and improve the technology and engineering associated with project and contract management. Participants in this program are empowered with the authority, resources, and training to implement their defined priorities, roles, and responsibilities. The Office of Waste Processing Multi-Year Program Plan (MYPP) supports the goals and objectives of the U.S. Department of Energy (DOE) - Office of Environmental Management Engineering and Technology Roadmap by providing direction for technology enhancement, development, and demonstration that will lead to a reduction of technical risks and uncertainties in EM waste processing activities. The MYPP summarizes the program areas and the scope of activities within each program area proposed for the next five years to improve safety and reduce costs and environmental impacts associated with waste processing; authorized budget levels will impact how much of the scope of activities can be executed, on a year-to-year basis. Waste Processing Program activities within the Roadmap and the MYPP are described in these seven program areas: (1) Improved Waste Storage Technology; (2) Reliable and Efficient Waste Retrieval Technologies; (3) Enhanced Tank Closure Processes; (4) Next-Generation Pretreatment Solutions; (5

  17. Task 10 - technology development integration. Semi-annual report, April 1--September 30, 1996

    International Nuclear Information System (INIS)

    The Energy and Environmental Research Center (EERC), in conjunction with the Waste Policy Institute (WPI), will identify and integrate new technologies to meet site-specific environmental management (EM) requirements at contaminated sites appropriate to U.S. Department of Energy (DOE) interests. This paper briefly reports overall progress for three activities: technology management, project management, and technology integration. Work performed over the reporting period has focused on providing logistical and administrative support. In addition, six monthly WPI reports to the EERC are included as appendices. The WPI reports contained detailed information for progress in each activity

  18. Semi-annual report of Nuclear Technology and Development Center (CDTN) - July to December 1988

    International Nuclear Information System (INIS)

    The main activities developed by the several divisions of Nuclear Technology Development Center (CDTN) are described, including areas of reactor tecnologies, fuel cycle, materials and component, nuclear safety and tecnical substructure. (C.G.C.)

  19. Department of Energy Technology annual progress report 1 January - 31 December 1985

    International Nuclear Information System (INIS)

    The general development of the Department of Energy Technology at Risoe during 1985 is presented, and the activities within the major subject fields are described in some detail. Lists of staff and publications are included. (author)

  20. Chemical Technology Division annual progress report for period ending March 31, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Ferguson, D.E.

    1978-08-01

    Separate abstracts were prepared for the various sections on fission energy, coal conversion and utilization, waste management, basic science and technology, biotechnology and environmental studies, special isotope production and separations, Nuclear Regulatory Commission programs, and miscellaneous programs.

  1. Semi-annual report of the Mineral Technology Department from CDTN - July to December 1988

    International Nuclear Information System (INIS)

    The activities developed by the Mineral Technology Department of CDTN during 1988, in the area of chemical analysis, mineralogy, petrography and studies about mineral characterization are described. (E.G.)

  2. Department of Energy Technology. Annual Progress Report 1 January - 31 December 1982

    DEFF Research Database (Denmark)

    Risø National Laboratory, Roskilde

    The general development of the Department of Energy Technology at Risø during 1982 is presented, and the activities within the major subject fields are described in some detail. Lists of staff, publications, and computer programs are included.......The general development of the Department of Energy Technology at Risø during 1982 is presented, and the activities within the major subject fields are described in some detail. Lists of staff, publications, and computer programs are included....

  3. Chemical Technology Division annual progress report for period ending March 31, 1976

    Energy Technology Data Exchange (ETDEWEB)

    1976-09-01

    The status is reported for various research programs including waste management, transuranium-element processing, isotopic separations, preparation of /sup 233/UO/sub 2/, separations chemistry, biomedical technology, environmental studies, coal technology program, actinide oxides and nitrides and carbides, chemical engineering, controlled thermonuclear program, iodine studies, reactor safety, NRC programs, and diffusion of adsorbed species in porous media. Details of these programs are given in topical reports and journal articles. (JSR)

  4. Oak Ridge National Laboratory Annual Progress Report for the Electric Drive Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    Ozpineci, Burak [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-10-01

    The US Department of Energy (DOE) announced in May 2011 a new cooperative research effort comprising DOE, the US Council for Automotive Research (composed of automakers Ford Motor Company, General Motors Company, and Chrysler Group), Tesla Motors, and representatives of the electric utility and petroleum industries. Known as U.S. DRIVE (Driving Research and Innovation for Vehicle efficiency and Energy sustainability), it represents DOE’s commitment to developing public–private partnerships to fund high-risk–high-reward research into advanced automotive technologies. The new partnership replaces and builds upon the partnership known as FreedomCAR (derived from “Freedom” and “Cooperative Automotive Research”) that ran from 2002 through 2010 and the Partnership for a New Generation of Vehicles initiative that ran from 1993 through 2001. Oak Ridge National Laboratory’s (ORNL’s) Electric Drive Technologies (EDT) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies now under development. Research is focused on developing revolutionary new power electronics (PE), electric motor (EM), and traction drive system (TDS) technologies that will leapfrog current on-the-road technologies, leading to lower cost and better efficiency in transforming battery energy to useful work. The research and development (R&D) is also aimed at achieving a greater understanding of and improvements in the way the various new components of tomorrow’s automobiles will function as a unified system to improve fuel efficiency through research in more efficient TDSs. In supporting the development of advanced vehicle propulsion systems, the EDT subprogram fosters the development of technologies that will significantly improve efficiency, costs, and fuel economy

  5. Progress report on nuclear science and technology in China (Vol.2). Proceedings of academic annual meeting of China Nuclear Society in 2011, No.10--nuclear technology economy and management modernization sub-volume

    International Nuclear Information System (INIS)

    Progress report on nuclear science and technology in China (Vol. 2) includes 698 articles which are communicated on the second national academic annual meeting of China Nuclear Society. There are 10 books totally. This is the tenth one, the content is about nuclear technology economy and management modernization

  6. Task 10 -- Technology development integration. Semi-annual report, April 1--September 30, 1997

    Energy Technology Data Exchange (ETDEWEB)

    Erickson, T.A.; Daly, D.J.; Jones, M.L.

    1997-12-31

    Task 10 activities by the Energy and Environmental Research Center (EERC) have focused on the identification and integration of new cleanup technologies for use in the US Department of Energy (DOE) Environmental Management Program to address environmental issues within the nuclear defense complex. Under Subtask 10A, activities focused on a review of technology needs compiled by the Site Technology Coordination Groups as part of an ongoing assessment of the relevance of the EM Cooperative Agreement Program activities to EM site needs. Work under this subtask was completed August 31. Work under Task 10B had as its goal assisting in the definition and development of specific models to demonstrate several approaches to be used by DOE to encourage the commercialization of environmental technologies. This activity included identification and analysis of economic and regulatory factors affecting feasibility of commercial development of two specific projects and two general models to serve as a mechanism for the transfer of federally supported or developed environmental technologies to the private sector or for rapid utilization in the federal government`s efforts to clean up the weapons complex.

  7. Third annual report to Congress on the automotive technology development program

    Energy Technology Data Exchange (ETDEWEB)

    1982-03-01

    The Automotive Propulsion Research and Development Act of 1978 focused on advancing the technology of automotive propulsion systems. In formulating the Act, Congress found that: (1) existing automobiles do not meet the Nation's long-term environmental and energy goals; (2) insufficient resources are being devoted to research and development (R and D) on advanced automobile propulsion systems; (3) with sufficient R and D, alternatives to existing systems could meet long-term goals at reasonable cost; and (4) expanded R and D would complement and stimulate corresponding private sector efforts. Because of the Nation's energy problems, Congress felt that advanced automobile propulsion system technology should be developed quickly. Through the Act, Congress expressed its intent for the Department of Energy (DOE) to: (1) make R and D contracts and grants for development of advanced automobile propulsion systems within five years, or within the shortest practicable time consistent with appropriate R and D techniques; (2) evaluate and disseminate information about advanced automobile propulsion system technology; (3) preserve, enhance, and facilitate competition in R and D of existing and alternative automotive propulsion systems; and (4) supplement, but neither supplant nor duplicate, private industry R and D efforts. Summaries of the status of conventional powertrain technology, automotive technology development program, and the management plan and policy transition are given. Tables on contracts and grant procurement for advanced gas turbine engine systems, advanced Stirling engine systems, and the vehicle systems project are given. (WHK)

  8. Fractured reservoir discrete feature network technologies. Annual report, March 7, 1996--February 28, 1997

    Energy Technology Data Exchange (ETDEWEB)

    Dershowitz, W.S.; La Pointe, P.R.; Einstein, H.H.; Ivanova, V.

    1998-01-01

    This report describes progress on the project, {open_quotes}Fractured Reservoir Discrete Feature Network Technologies{close_quotes} during the period March 7, 1996 to February 28, 1997. The report presents summaries of technology development for the following research areas: (1) development of hierarchical fracture models, (2) fractured reservoir compartmentalization and tributary volume, (3) fractured reservoir data analysis, and (4) integration of fractured reservoir data and production technologies. In addition, the report provides information on project status, publications submitted, data collection activities, and technology transfer through the world wide web (WWW). Research on hierarchical fracture models included geological, mathematical, and computer code development. The project built a foundation of quantitative, geological and geometrical information about the regional geology of the Permian Basin, including detailed information on the lithology, stratigraphy, and fracturing of Permian rocks in the project study area (Tracts 17 and 49 in the Yates field). Based on the accumulated knowledge of regional and local geology, project team members started the interpretation of fracture genesis mechanisms and the conceptual modeling of the fracture system in the study area. Research on fractured reservoir compartmentalization included basic research, technology development, and application of compartmentalized reservoir analyses for the project study site. Procedures were developed to analyze compartmentalization, tributary drainage volume, and reservoir matrix block size. These algorithms were implemented as a Windows 95 compartmentalization code, FraCluster.

  9. Oak Ridge National Laboratory (ORNL) Superconducting Technology Program for electric power systems. Annual report for FY 1994

    Energy Technology Data Exchange (ETDEWEB)

    Koncinski, W.S. [ed.; Hawsey, R.A. [comp.

    1994-12-01

    The Oak Ridge National Laboratory (ORNL) Superconducting Technology Program is conducted as part of a national effort by the US Department of Energy`s Office of Energy Efficiency and Renewable Energy to develop the technology base needed by US industry for commercial development of electric power applications of high-temperature superconductivity. The three major elements of this program are conductor development, applications development, and the Superconductivity Partnership Initiative. This document describes the major research and development activities for this program together with related accomplishments. The technical progress reported was summarized from information prepared for the FY 1994 Annual Program Review held July 19--20, 2994. This ORNL program is highly leveraged by the staff and other resources of US industry and universities. In fact, nearly three-fourths of the ORNL effort is devoted to industrial competitiveness projects with private companies. Interlaboratory teams are also in place on a number of industry-driven projects. Patent disclosures, working group meetings, staff exchanges, and joint publications and presentations ensure that there is technology transfer with US industry. Working together, the collaborative teams are making rapid progress in solving the scientific and technical issues necessary for the commercialization of long lengths of practical high-temperature superconductor wire and wire products.

  10. Ceramic technology report. Semi-annual progress report, April 1994--September 1994

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, D.R.

    1995-06-01

    The Ceramic Technology Project was originally developed by the Department of Energy`s Office of Transportation Systems (OTS) in Energy Efficiency and Renewable Energy. This project, part of the OTS`s Materials Development Program, was developed to meet the ceramic technology requirements of the OTS`s automotive technology programs. Significant accomplishments in fabricating ceramic components for the Department of Energy (DOE), National Aeronautics and Space Administration (NASA), and Department of Defense (DoD) advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. However, these programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. In response to extensive input from industry, the plan is to extend the engine types which were previously supported (advanced gas turbine and low-heat-rejection diesel engines) to include near-term (5-10 years) applications in conventional automobile and diesel truck engines. To facilitate the rapid transfer of this technology to U.S. industry, the major portion of the work is being done in the ceramic industry, with technological support from government laboratories, other industrial laboratories, and universities. A systematic approach to reducing the cost of components is envisioned. The work elements are as follows: economic cost modeling, ceramic machining, powder synthesis, alternative forming and densification processes, yield improvement, system design studies, standards development, low-expansion ceramics, and testing and data base development.

  11. Advanced energy systems and technologies research in Finland. NEMO-2 Programme Annual Report 1996-1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-10-01

    Advanced energy technologies were linked to the national energy research in the beginning of 1988 when energy research was reorganised in Finland. The Ministry of Trade and Industry established several energy research programmes and NEMO was one of them. Major objectives of the programme were to assess the potential of new energy systems for the national energy supply system and to promote industrial activities. Within the NEMO 2 programme for the years 1993-1998, research was focused on a few promising technological solutions. In the beginning of 1995, the national energy research activities were passed on to the Technology Development Centre TEKES. The NEMO 2 programme is directed towards those areas that have particular potential for commercial exploitation or development. Emphasis is placed particularly on solar and wind energy, as well as supporting technologies, such as energy storage and hydrogen technology. Resources have been focused on three specific areas: arctic wind technology, wind turbine components, and the integration of solar energy into applications (including thin film solar cells). In Finland, the growth of the new energy technology industry is concentrated on these areas. The turnover of the Finnish industry has been growing considerably due to the national research activities and support of technology development. The sales have increased more than 10 times compared with the year 1987 and is now over 300 million FIM. The support to industries and their involvement in the program has grown considerably. In this report, the essential research projects of the programme during 1996-1997 are described. The total funding for these projects was about 30 million FIM per year, of which the TEKES`s share was about 40 per cent. The programme consists of 10 research projects, some 15 joint development projects, and 9 EU projects. In case the research projects and joint development projects are acting very closely, the description of the project is

  12. Bioremediation Education Science and Technology (BEST) Program Annual Report 1999; TOPICAL

    International Nuclear Information System (INIS)

    The Bioremediation, Education, Science and Technology (BEST) partnership provides a sustainable and contemporary approach to developing new bioremedial technologies for US Department of Defense (DoD) priority contaminants while increasing the representation of underrepresented minorities and women in an exciting new biotechnical field. This comprehensive and innovative bioremediation education program provides under-represented groups with a cross-disciplinary bioremediation cirruculum and financial support, coupled with relevant training experiences at advanced research laboratories and field sites. These programs are designed to provide a stream of highly trained minority and women professionals to meet national environmental needs

  13. Advanced energy systems and technologies research in Finland. NEMO-2 Programme Annual Report 1996-1997

    International Nuclear Information System (INIS)

    Advanced energy technologies were linked to the national energy research in the beginning of 1988 when energy research was reorganised in Finland. The Ministry of Trade and Industry established several energy research programmes and NEMO was one of them. Major objectives of the programme were to assess the potential of new energy systems for the national energy supply system and to promote industrial activities. Within the NEMO 2 programme for the years 1993-1998, research was focused on a few promising technological solutions. In the beginning of 1995, the national energy research activities were passed on to the Technology Development Centre TEKES. The NEMO 2 programme is directed towards those areas that have particular potential for commercial exploitation or development. Emphasis is placed particularly on solar and wind energy, as well as supporting technologies, such as energy storage and hydrogen technology. Resources have been focused on three specific areas: arctic wind technology, wind turbine components, and the integration of solar energy into applications (including thin film solar cells). In Finland, the growth of the new energy technology industry is concentrated on these areas. The turnover of the Finnish industry has been growing considerably due to the national research activities and support of technology development. The sales have increased more than 10 times compared with the year 1987 and is now over 300 million FIM. The support to industries and their involvement in the program has grown considerably. In this report, the essential research projects of the programme during 1996-1997 are described. The total funding for these projects was about 30 million FIM per year, of which the TEKES's share was about 40 per cent. The programme consists of 10 research projects, some 15 joint development projects, and 9 EU projects. In case the research projects and joint development projects are acting very closely, the description of the project is

  14. Heat pipe technology: a bibliography with abstracts. Annual supplement, 1973. [323 citations

    Energy Technology Data Exchange (ETDEWEB)

    1973-01-01

    A bibliography is given listing 229 references with abstracts and 94 patents dealing with applications of heat pipe technology. Topics covered include: heat exchangers for heating and air conditioning; electronics cooling; temperature control of spacecraft; heat transfer in thermoelectric power generators; heat transfer in nuclear reactors; measurement of thermophysical properties; solar collectors; cooling engines; electrohydrodynamic phenomena; and vapor laser ovens. (GRA)

  15. Laser Science and Technology Program Annual Report-2002 NIF Programs Directorate

    International Nuclear Information System (INIS)

    The Laser Science and Technology (LSandT) Program's mission is to develop advanced lasers, optics, materials technologies, and applications to solve problems and create new capabilities of importance to the nation and the Laboratory. A top, near-term priority is to provide technical support in the deployment and upgrade of the National Ignition Facility (NIF). Our other program activities synergistically develop technologies that are consistent with the goals of the NIF Directorate and develop state-of-the-art capabilities. The primary objectives of LSandT activities in 2002 have been fourfold--(a) to support deployment of hardware and to enhance laser and optics performance for NIF, (b) to develop high-energy petawatt laser science and technology for the Department of Energy (DOE), (c) to develop advanced solid-state laser systems and optical components for the Department of Defense (DoD), and (d) to invent, develop, and deliver improved concepts and hardware for other government agencies and industry. LSandT activities during 2002 focused on seven major areas: (1) NIF Project-LSandT led major advances in the deployment of NIF Final Optics Assembly (FOA) and the development of 30.1 optics processing and treatment technologies to enhance NIF's operations and performance capabilities. (2) Stockpile Stewardship Program (SSP)-LSandT personnel continued development of ultrashort-pulse lasers and high-power, large-aperture optics for applications in SSP, extreme-field science and national defense. To enhance the high-energy petawatt (HEPW) capability in NIF, LSandT continued development of advanced compressor-grating and front-end laser technologies utilizing optical-parametric chirped-pulse amplification (OPCPA). (3) High-energy-density physics and inertial fusion energy-LSandT continued development of kW- to MW-class, diode-pumped, solid-state laser (DPSSL). (4) Department of Defense (DoD)-LSandT continued development of a 100 kw-class solid-state heat-capacity laser

  16. Exploratory technology research program for electrochemical energy storage. Annual report for 1995

    Energy Technology Data Exchange (ETDEWEB)

    Kinoshita, Kim [ed.

    1996-06-01

    The US DOE Office of Transportation Technologies provides support for an Electrochemical Energy Storage Program, that includes research and development (R&D) on advanced rechargeable batteries and fuel cells. A major goal of this program is to develop electrochemical power sources suitable for application in electric vehicles (EV`s)and hybrid systems. The program centers on advanced electrochemical systems that offer the potential for high performance and low life- cycle costs, both of which are necessary to permit significant penetration into commercial markets. The DOE Electric Vehicle Technology Program is divided into two project areas: the US Advanced Battery Consortium (USABC) and Advanced battery R&D which includes the Exploratory Technology Research (ETR) program managed by the Lawrence Berkeley National Laboratory. The role of the ETR program is to perform supporting research on the advanced battery systems under development by the USABC and the Sandia Laboratories (SNL) Electric Vehicle Advanced Battery Systems (EVABS) program, and to evaluate new systems with potentially superior performance, durability and/of cost characteristics. The specific goal of the ETR program is to identify the most promising electrochemical technologies and development and scale-up. This report summarizes the research, financial and management activities relevant to the ETR program in CY 1995. This is a continuing program, and reports for prior years have been published; they are listed in this report.The general R&D areas addressed by the program include identification of new electrochemical couples for advanced batteries, determination of technical feasibility of the new couples, improvements in battery components and materials, establishment of engineering principles applicable to electrochemical energy storage and conversion, and the development of fuel cell technology for transportation applications.

  17. Grande Ronde Basin Chinook Salmon Captive Brood and Conventional Supplementation Programs, 2002 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Carmichael, Richard W. (Oregon Department of Fish and Wildlife, La Grande, OR)

    2003-07-01

    Endangered Species Permit Number 1011 (formerly Permit No. 973) authorizes ODFW to take listed spring chinook salmon juveniles from Catherine Creek (CC), Lostine River (LR) and Grande Ronde River (GR) for research and enhancement purposes. Modification 2 of this permit authorizes ODFW to take adults for spawning and the production and release of smolts for the Captive and Conventional broodstock programs. This report satisfies the requirement that an annual report be submitted. Herein we report on activities conducted and provide cursory data analyses for the Grande Ronde spring chinook salmon Captive and Conventional broodstock projects from 1 January-31 December 2002. The Grande Ronde Basin Spring Chinook Salmon Captive Broodstock Project is designed to rapidly increase numbers of salmon in stocks that are in imminent danger of extirpation. Parr are captured in Catherine Creek, upper Grande Ronde River and Lostine River and reared to adulthood in captivity. Upon maturation, they are spawned (within stocks) and their progeny reared to smoltification before being released into the natal stream of their parents. This program is co-managed by ODFW, National Marine Fisheries Service, the Nez Perce Tribe and Confederated Tribes of the Umatilla Indian Reservation.

  18. UNITED STATES DEPARTMENT OF ENERGY WASTE PROCESSING ANNUAL TECHNOLOGY DEVELOPMENT REPORT 2007

    Energy Technology Data Exchange (ETDEWEB)

    Bush, S

    2008-08-12

    The Office of Environmental Management's (EM) Roadmap, U.S. Department of Energy--Office of Environmental Management Engineering & Technology Roadmap (Roadmap), defines the Department's intent to reduce the technical risk and uncertainty in its cleanup programs. The unique nature of many of the remaining facilities will require a strong and responsive engineering and technology program to improve worker and public safety, and reduce costs and environmental impacts while completing the cleanup program. The technical risks and uncertainties associated with cleanup program were identified through: (1) project risk assessments, (2) programmatic external technical reviews and technology readiness assessments, and (3) direct site input. In order to address these needs, the technical risks and uncertainties were compiled and divided into the program areas of: Waste Processing, Groundwater and Soil Remediation, and Deactivation and Decommissioning (D&D). Strategic initiatives were then developed within each program area to address the technical risks and uncertainties in that program area. These strategic initiatives were subsequently incorporated into the Roadmap, where they form the strategic framework of the EM Engineering & Technology Program. The EM-21 Multi-Year Program Plan (MYPP) supports the goals and objectives of the Roadmap by providing direction for technology enhancement, development, and demonstrations that will lead to a reduction of technical uncertainties in EM waste processing activities. The current MYPP summarizes the strategic initiatives and the scope of the activities within each initiative that are proposed for the next five years (FY2008-2012) to improve safety and reduce costs and environmental impacts associated with waste processing; authorized budget levels will impact how much of the scope of activities can be executed, on a year-to-year basis. As a result of the importance of reducing technical risk and uncertainty in the EM Waste

  19. Production of ethanol from refinery waste gases. Phase 2, technology development, annual report

    Energy Technology Data Exchange (ETDEWEB)

    Arora, D.; Basu, R.; Phillips, J.R.; Wikstrom, C.V.; Clausen, E.C.; Gaddy, J.L.

    1995-07-01

    Oil refineries discharge large volumes of H{sub 2}, CO, and CO{sub 2} from cracking, coking, and hydrotreating operations. This program seeks to develop a biological process for converting these waste gases into ethanol, which can be blended with gasoline to reduce emissions. Production of ethanol from all 194 US refineries would save 450 billion BTU annually, would reduce crude oil imports by 110 million barrels/year and emissions by 19 million tons/year. Phase II efforts has yielded at least 3 cultures (Clostridium ljungdahlii, Isolate O-52, Isolate C-01) which are able to produce commercially viable concentrations of ethanol from CO, CO{sub 2}, and H{sub 2} in petroleum waste gas. Single continuous stirred tank reactor studies have shown that 15-20 g/L of ethanol can be produced, with less than 5 g/L acetic acid byproduct. Culture and reactor optimization in Phase III should yield even higher ethanol concentrations and minimal acetic acid. Product recovery studies showed that ethanol is best recovered in a multi-step process involving solvent extraction/distillation to azeotrope/azeotropic distillation or pervaporation, or direct distillation to the azeotrope/azeotropic distillation or pervaporation. Projections show that the ethanol facility for a typical refinery would require an investment of about $30 million, which would be returned in less than 2 years.

  20. Fusion technology. Annual report of the Association CEA/EURATOM 1997

    International Nuclear Information System (INIS)

    The research and development work performed by the French EURATOM-CEA Association for fusion technology is part of the Fusion Programme of the European Community. This report compiles the work carried out during the year 1997 as follows: The ITER CEA activities and related developments are described in the first section (plasma facing components, vacuum vessel and shield, magnets, remote handling, safety); The second part is dedicated to the Long Term activities as Blankets and material developments, long term safety, socio-economic problem; The Underlying Technology activities are compiled in the third part of this report (plasma facing components, vacuum vessel and shield, magnets, remote handling, safety); And the fourth part describes the inertial confinement studies. (K.A.)

  1. MHD air heater technology development. Annual technical progress report, January 1, 1980-December 31, 1980

    Energy Technology Data Exchange (ETDEWEB)

    None

    1981-03-01

    Progress on the technology development of the directly-fired high temperature air heater (HTAH) for MHD power plants is described in detail. The objective of task 1 is to continue development of ceramic materials technology for the directly-fired HTAH. The objectives of task 2 are to demonstrate the technical feasibility of operating a directly-fired HTAH (including both the heater matrix and valves), to continue obtaining information on life and corrosion resistance of HTAH materials, and to obtain design information for full-scale studies and future design work. The objectives of task 3 are to begin the identification of HTAH control requirements and control system needs, and to continue full-scale study efforts incorporating updated materials and design information in order to identify development needs for the HTAH development program. (WHK)

  2. 1998 Chemical Technology Division Annual Technical Report. Applying chemical innovation to environmental problems

    International Nuclear Information System (INIS)

    The Chemical Technology (CMT) Division is a diverse technical organization with principal emphases in environmental management and development of advanced energy sources. The Division conducts research and development in three general areas: (1) development of advanced power sources for stationary and transportation applications and for consumer electronics, (2) management of high-level and low-level nuclear wastes and hazardous wastes, and (3) electrometallurgical treatment of spent nuclear fuel. The Division also performs basic research in catalytic chemistry involving molecular energy resources, mechanisms of ion transport in lithium battery electrolytes, and the chemistry of technology-relevant materials. In addition, the Division operates the Analytical Chemistry Laboratory, which conducts research in analytical chemistry and provides analytical services for programs at Argonne National Laboratory (ANL) and other organizations. Technical highlights of the Division's activities during 1998 are presented

  3. Fusion technology. Annual report of the Association CEA/EURATOM 1997

    Energy Technology Data Exchange (ETDEWEB)

    Magaud, P.; Le Vagueres, F

    1998-12-31

    The research and development work performed by the French EURATOM-CEA Association for fusion technology is part of the Fusion Programme of the European Community. This report compiles the work carried out during the year 1997 as follows: The ITER CEA activities and related developments are described in the first section (plasma facing components, vacuum vessel and shield, magnets, remote handling, safety); The second part is dedicated to the Long Term activities as Blankets and material developments, long term safety, socio-economic problem; The Underlying Technology activities are compiled in the third part of this report (plasma facing components, vacuum vessel and shield, magnets, remote handling, safety); And the fourth part describes the inertial confinement studies. (K.A.)

  4. Exploratory technology research program for electrochemical energy storage, annual report for 1997

    Energy Technology Data Exchange (ETDEWEB)

    Kinoshita, K. [ed.

    1998-06-01

    The US Department of Energy`s (DOE) Office of Transportation Technologies provides support for an Electrochemical Energy Storage Program, that includes research and development on advanced rechargeable batteries. A major goal of this program is to develop electrochemical power sources suitable for application in electric vehicles (EVs) and hybrid systems. The program centers on advanced electrochemical systems that offer the potential for high performance and low life-cycle costs, both of which are necessary to permit significant penetration into commercial markets. The DOE Electric Vehicle Technology Program is divided into two project areas: the US Advanced Battery Consortium (USABC) and Advanced Battery R and D which includes the Exploratory Technology Research (ETR) Program managed by the Lawrence Berkeley National Laboratory (LBNL). The specific goal of the ETR Program is to identify the most promising electrochemical technologies and transfer them to the USABC, the battery industry and/or other Government agencies for further development and scale-up. This report summarizes the research, financial and management activities relevant to the ETR Program in CY 1997. This is a continuing program, and reports for prior years have been published; they are listed at the end of this Executive Summary. The general R and D areas addressed by the program include identification of new electrochemical couples for advanced batteries, determination of technical feasibility of the new couples, improvements in battery components and materials, and establishment of engineering principles applicable to electrochemical energy storage. Major emphasis is given to applied research which will lead to superior performance and lower life-cycle costs.

  5. Department of Reactor Technology annual progress report 1 January -31 December 1977

    International Nuclear Information System (INIS)

    The work of the Department of Reactor Technology within the following fields is described: reactor engineering, reactor operation, structural reliability, system reliability, reactor physics, fuel management, reactor accident analysis for LOCA and ECC, containment analysis, experimental heat transfer, reactor core dynamics and power plant simulators, experimental activation measurements and neutron radiography at the DR 1 reactor, underground storage of gas, solar heating and underground heat storage, wind power. (author)

  6. Annual meeting on nuclear technology 2010. Documentation; Jahrestagung Kerntechnik 2010. Dokumentation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-05-15

    The conference proceedings include contributions on the following topics: reactor physics and methods of calculations; thermodynamics and fluid dynamics; safety of nuclear installations - methods, analysis, results; front end of the fuel cycle, fuel elements and core components; radioactive waste management, storage; operation of nuclear installations; decommissioning of nuclear installations; fusion technology; energy industry and economics; radiation protection; new build and innovation; education, expert knowledge, know-how transfer.

  7. Department of Energy Technology. Annual progress report 1 January - 31 December 1989

    International Nuclear Information System (INIS)

    The general development of the Department of Energy Technology at Risoe during 1989 is presented. This year was the last one for the department, as organizational changes at the beginning of 1990 caused a split-up of the sections of the department. The activities within the major fields are described in some detail and lists of staff and publicaltions are included. (author) 10 ills., 29 refs

  8. The 17th Annual Magnet Technology Conference Hosted By CERN Is Proving That Opposites Attract...

    CERN Multimedia

    2001-01-01

    Hundreds were drawn together by the 17th Magnet Technology Conference, the largest conference devoted to magnets in the world. Thirty-six years ago about 50 physicists and engineers came together at SLAC, Stanford, to have a symposium on magnet technology. Simple as it seemed at the moment, it was the first time that anyone seriously considered building superconducting magnets and was the birth of the Magnet Technology (MT) conference. The conference has occurred every two years since that time and had its most recent incarnation, MT-17, hosted by CERN just last week at the International Conference Centre here in Geneva. With so much innovative work being done with magnets in the LHC and its experiments (ATLAS, CMS, Alice and LHCb), having an MT conference hosted by CERN in Geneva was expected. However, what was not expected was the level of interest with which MT-17 was met. 'We are victims of our own success', says Romeo Perin who was one of the 50 physicists/engineers who attended the Stanford symposium a...

  9. SETEC/Semiconductor Manufacturing Technologies Program: 1999 Annual and Final Report

    Energy Technology Data Exchange (ETDEWEB)

    MCBRAYER,JOHN D.

    2000-12-01

    This report summarizes the results of work conducted by the Semiconductor Manufacturing Technologies Program at Sandia National Laboratories (Sandia) during 1999. This work was performed by one working group: the Semiconductor Equipment Technology Center (SETEC). The group's projects included Numerical/Experimental Characterization of the Growth of Single-Crystal Calcium Fluoride (CaF{sub 2}); The Use of High-Resolution Transmission Electron Microscopy (HRTEM) Imaging for Certifying Critical-Dimension Reference Materials Fabricated with Silicon Micromachining; Assembly Test Chip for Flip Chip on Board; Plasma Mechanism Validation: Modeling and Experimentation; and Model-Based Reduction of Contamination in Gate-Quality Nitride Reactor. During 1999, all projects focused on meeting customer needs in a timely manner and ensuring that projects were aligned with the goals of the National Technology Roadmap for Semiconductors sponsored by the Semiconductor Industry Association and with Sandia's defense mission. This report also provides a short history of the Sandia/SEMATECH relationship and a brief on all projects completed during the seven years of the program.

  10. Exploratory Technology Research Program for Electrochemical Energy Storage. Annual report, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Kinoshita, K. [ed.

    1993-10-01

    This report summarizes the progress made by the Exploratory Technology Research (ETR) Program for Electrochemical Energy Storage during calendar year 1992. The primary objective of the ETR Program, which is sponsored by the US Department of Energy (DOE) and managed by Lawrence Berkeley Laboratory (LBL), is to identify electrochemical technologies that can satisfy stringent performance, durability and economic requirements for electric vehicles (EVs). The ultimate goal is to transfer the most-promising electrochemical technologies to the private sector or to another DOE program (e.g., SNL`s Electric Vehicle Advanced Battery Systems Development Program, EVABS) for further development and scale-up. Besides LBL, which has overall responsibility for the ETR Program, LANL and BNL have participated in the ETR Program by providing key research support in several of the program elements. The ETR Program consists of three major elements: Exploratory Research; Applied Science Research; and Air Systems Research. The objectives and the specific battery and electrochemical systems addressed by each program element are discussed in the following sections, which also include technical summaries that relate to the individual programs. Financial information that relates to the various programs and a description of the management activities for the ETR Program are described in the Executive Summary.

  11. ORNL Superconducting Technology Program for Electric Energy Systems. Annual report for FY 1992

    Energy Technology Data Exchange (ETDEWEB)

    Hawsey, R.A. [comp.

    1993-02-01

    The Oak Ridge National Laboratory (ORNL) Superconducting Technology Program is conducted as part of a national effort by the US Department of Energy`s (DOE`s) Office of Conservation and Renewable Energy to develop the technology base needed by US industry for commercial development of electric power applications of high-temperature superconductivity. The two major elements of this program are wire development and systems development. This document describes the major research and development activities for this program together with related accomplishments. The technical progress reported was summarized from information prepared for the FY 1992 Peer Review of Projects, conducted by DOE`s Office of Program Analysis, Office of Energy Research. This ORNL program is highly leveraged by the staff and other resources of US industry and universities. Interlaboratory teams are also in place on a number of industry-driven projects. Patent disclosures, working group meetings, staff exchanges, and joint publications and presentations ensure that there is technology transfer to US industry. Working together, the collaborative teams are making tremendous progress in solving the scientific and technical issues necessary for the commercialization of long lengths of practical high-temperature superconductor wire and wire products.

  12. Exploratory Technology Research Program for Electrochemical Energy Storage - Annual Report for 1998

    Energy Technology Data Exchange (ETDEWEB)

    Kinoshita, K. (editor)

    1999-06-01

    The US Department of Energy's (DOE) Office of Advanced Automotive Technologies conducts research and development on advanced rechargeable batteries for application in electric vehicles (EVs) and hybrid systems. Efforts are focused on advanced batteries that offer the potential for high performance and low life-cycle costs, both of which are necessary to permit significant penetration into commercial markets. DOE battery R and D supports two major programs: the US Advanced Battery Consortium (USABC), which develops advanced batteries for EVS, and the Partnership for a New Generation of Vehicles (PNGV), which seeks to develop passenger vehicles with a fuel economy equivalent to 80 mpg of gasoline. This report describes the activities of the Exploratory Technology Research (ETR) Program, managed by the Lawrence Berkeley National Laboratory (LBNL). The role of the ETR Program is to perform supporting research on the advanced battery systems under development by the USABC and PNGV Programs, and to evaluate new systems with potentially superior performance, durability and/or cost characteristics. The specific goal of the ETR Program is to identify the most promising electrochemical technologies and transfer them to the USABC, the battery industry and/or other Government agencies for further development and scale-up. This report summarizes the research, financial and management activities relevant to the ETR Program in CY 1998. This is a continuing program, and reports for prior years have been published; they are listed at the end of this Program Summary.

  13. Research and development for treatment and disposal technologies of TRU waste. JFY 2010 annual report

    International Nuclear Information System (INIS)

    Based on Japanese governmental policy and general scheme, research and development of geological disposal technology for TRU waste has been proceeding to improve reliability of the safety assessment of the co-locational disposal of TRU waste and of HLW, to expand the basement of generic safety assessment, and to develop the alternative technology to cope with the broad geologic environment of Japan. Japan Atomic Energy Agency is dealing with the assignments in the governmental generic scheme. We report here the progress of the studies at the end of H22 (2010) Japanese fiscal year and their products during the last 5 years. These include (1) evaluation of long-term mechanical stability in the near-field including development of a creep mode of rock and analyses of mechanical behavior of TRU waste repository, (2) performance assessment of the disposal system including data acquisition and preparation on radionuclides migration, cementitious material alteration, bentonite and hostrock alteration with alkaline solution and nitrate effect, and (3) alternative technology development including decomposition of nitrate. (author)

  14. Annual report to the Working Group on Technology, Growth, and Employment

    International Nuclear Information System (INIS)

    A meeting of the Working Group on High Energy Physics was convened in Brussels, Belgium, in July 1984, and impaneled new groups of technical experts to report on long-term planning, technical collaborations, and the identification of administrative obstacles experienced within the Summit countries that impede international collaboration. The charges to these three new groups are contained in this report under the section on the Brussels meeting. The reports prepared by the technical experts were then reviewed at the January 1985 meeting at Cadarache, France, and the results are contained in this report under the section on the Cadarache meeting. The Summit Working Group on High Energy Physics believes progress is being made toward cooperation among the Summit countries in the exploration of scientific and technological development upon which the Summit Heads of State and Government declared at Versailles revitalization and growth of the world economy will depend - to a large extent. At Cadarache, the Group found that, since its establishment, international collaboration has increased in the use of present accelerators and in the planning for future accelerators. The Group also found that there are specific areas of technology in which near-term research cooperation is possible. Finally, the Group identified administrative regulations that hamper effective international collaboration in science and technology and that could be revised or eliminated through coordinated, high level Summit action. The major accomplishment of the Working Group thus far has been the creation of a forum for discussions on collaboration in a major field of science by seven industrialized countries. The Group recommends the continuation of its review of long-term plans for major facilities on an intergovernmental basis

  15. Emerging technologies for reef fisheries research and management [held during the 56th annual Gulf and Caribbean Fisheries Institute meeting in Tortola, British Virgin Islands, November 2003

    OpenAIRE

    2006-01-01

    This publication of the NOAA Professional Paper NMFS Series is the product of a special symposium on “Emerging Technologies for Reef Fisheries Research and Management” held during the 56th annual Gulf and Caribbean Fisheries Institute meeting in Tortola, British Virgin Islands, November 2003. The purpose of this collection is to highlight the diversity of questions and issues in reef fisheries management that are benefiting from applications of technology. Topics cover a wide variety of...

  16. 47{sup th} Annual meeting on nuclear technology (AMNT 2016). About cores, coal and cash

    Energy Technology Data Exchange (ETDEWEB)

    Podivinsky, Tomas Jan

    2016-07-15

    Rationality and - especially with regard to reducing emissions - technological neutrality are two commitments for nuclear fission. The Czech Republic, where conditions are not suitable for economical large-scale operation of facilities based on renewables, there is no alternative in environmental or business policy to the reasonable use of nuclear energy. The aim of the updated Czech energy strategy is to increase the proportion of nuclear energy from 35 % to approx. 50 % of power generation and to cover the rest - together with ultra-high efficiency coal fired power plants - with energy from renewable sources and gas fired power plants.

  17. Fusion technology annual report of the association EURATOM/CEA 1998

    International Nuclear Information System (INIS)

    In this book are found technical and scientific papers on the main works carried out in the frame of the european program of fusion technology, during 1998. The presented activities are: plasma facing components, vacuum vessel and shield, magnets, remote handling, safety (short and long term), european blanket project (long term) with water cooled lithium lead and helium cooled pebble bed blanket, materials for fusion power plant, socio-economic research on fusion, plasma facing components, fuel cycle, inertial confinement. (A.L.B.)

  18. AGH University of Science and Technology, Faculty of Physics and Applied Computer Science, Annual Report 2008

    International Nuclear Information System (INIS)

    The most important research activities of the Faculty are condensed matter physics and physics of elementary particles. Advanced fundamental as well as applied studies are also carried out in the fields of nuclear physics and technology, electronics, environmental physics and medicinal physics. Report presents short descriptions of the results obtained in 2009. It contains also list of 198 papers published in the national and international scientific journals and of 6 book chapters published in 2009. Report contains full list of grants (national and international) realized in 2009

  19. Exploratory Technology Research Program for electrochemical energy storage. Annual report fr 1994

    Energy Technology Data Exchange (ETDEWEB)

    Kinoshita, K. [ed.

    1995-09-01

    The US Department of Energy`s Office of Propulsion Systems provides support for an Electrochemical Energy Storage Program, that includes research and development (R&D) on advanced rechargeable batteries and fuel cells. A major goal of this program is to develop electrochemical power sources suitable for application in electric vehicles (EVs). The program centers on advanced systems that offer the potential for high performance and low life-cycle costs, both of which are necessary to permit significant penetration into commercial markets. The DOE Electrochemical Energy Storage Program is divided into two projects: the Electric Vehicle Advanced Battery Systems (EVABS) Development Program and the Exploratory Technology Research (ETR) Program. The general R&D areas addressed by the program include identification of new electrochemical couples for advanced batteries, determination of technical feasibility of the new couples, improvements in battery components and materials, establishment of engineering principles applicable to electrochemical energy storage and conversion, and the development of air-system (fuel cell, metal/air) technology for transportation applications. Major emphasis is given to applied research which will lead to superior performance and lower life-cycle costs. The ETR Program is divided into three major program elements: Exploratory Research, Applied Science Research, and Air Systems Research. Highlights of each program element are summarized according to the appropriate battery system or electrochemical research area.

  20. The Terascale Simulation Tools and Technologies Center Annual Report August 15, 2001-September 30, 2002

    Energy Technology Data Exchange (ETDEWEB)

    Glimm, J; Brown, D L; Freitag, L

    2002-09-30

    The overall goal of the TSTT Center is to enable the scientific community to more easily use modern high-order, adaptive, parallel mesh and discretization tools. To achieve this goal, we are following three distinct but related paths. The first is to work directly with a number of lead application teams (for the most part SciDAC-funded) to use such technologies in their application domains. The second is to create new technology that eases the use of such tools, not only for our designated application partners, but across a broad range of application areas that require mesh and discretization tools for scientific simulation. The main technology thrust is not to create new tools (although some of this will occur), but to create new capabilities that will allow the use of these tools interoperably. This very profound step can be compared to the shift from hand craftmanship to manufactured products with interchangable components which revolutionized the world economy one to two centuries ago. The third component of our efforts is to embed this work in a larger framework of related activities, each seeking a similar, and profound, change in the practice of computational science. To ensure the relevance of our work to the SciDAC program goals, we originally selected six application areas, and in each, one or more application projects and teams with which to work directly. One application collaboration which targeted the development of an adaptive mesh refinement capability for the oceanographic code POP was postponed and may be dropped due to unanticipated technical obstacles in the specific goal selected. One new application involving jet breakup for spray combustion was added. The initial job of establishing good working relations, agreement on a plan of action, and obtaining initial results was accomplished in all cases. In general, our work with the applications has been more difficult than anticipated, in spite of the experience of the TSTT team members in similar

  1. The Terascale Simulation Tools and Technologies Center Annual Report August 15, 2001-September 30, 2002

    Energy Technology Data Exchange (ETDEWEB)

    Glimm, J; Brown, D L; Freitag, L

    2002-09-30

    The overall goal of the TSTT Center is to enable the scientific community to more easily use modern high-order, adaptive, parallel mesh and discretization tools. To achieve this goal, we are following three distinct but related paths. The first is to work directly with a number of lead application teams (for the most part SciDAC-funded) to use such technologies in their application domains. The second is to create new technology that eases the use of such tools, not only for our designated application partners, but across a broad range of application areas that require mesh and discretization tools for scientific simulation. The main technology thrust is not to create new tools (although some of this will occur), but to create new capabilities that will allow the use of these tools interoperably. This very profound step can be compared to the shift from hand craftmanship to manufactured products with interchangable components which revolutionized the world economy one to two centuries ago. The third component of our efforts is to embed this work in a larger framework of related activities, each seeking a similar, and profound, change in the practice of computational science. To ensure the relevance of our work to the SciDAC program goals, we originally selected six application areas, and in each, one or more application projects and teams with which to work directly. One application collaboration which targeted the development of an adaptive mesh refinement capability for the oceanographic code POP was postponed and may be dropped due to unanticipated technical obstacles in the specific goal selected. One new application involving jet breakup for spray combustion was added. The initial job of establishing good working relations, agreement on a plan of action, and obtaining initial results was accomplished in all cases. In general, our work with the applications has been more difficult than anticipated, in spite of the experience of the TSTT team members in similar

  2. The National Energy Technology Laboratory Annual Site Environmental Report for Calendar Year 2000

    Energy Technology Data Exchange (ETDEWEB)

    National Energy Technology Laboratory

    2001-11-27

    This Site Environmental Report was prepared by the Environment, Safety, and Health Division at the National Energy Technology Laboratory (NETL) for the U.S. Department of Energy. The purpose of this report is to inform the public and Department of Energy stakeholders of the environmental conditions at the NETL sites in Morgantown, West Virginia, and Pittsburgh, Pennsylvania. This report contains the most accurate information that could be collected during the period between January 1, 2000, through December 31, 2000. As stated in DOE Orders 5400.1 and 231.1, the purpose of the report is to: Characterize site environmental management performance; Confirm compliance with environmental standards and requirements and Highlight significant facility programs and efforts.

  3. Australian Nuclear Science and Technology Organization. Annual Report 1995-1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-09-01

    The report provides an overview of the outcomes achieved and the current activities of ANSTO related to its core business activities. The core business of ANSTO were identified as follows: international strategic relevance of nuclear science; core facilities operation and development; applications of nuclear science and technology to the understanding of natural processes; treatment and management of man-made and naturally occurring radioactive substances; competitiveness and ecological sustainability of industry and organizational development and support. The report also include specific reporting against those performance indicators that were negotiated with the Government as part of the Triennium Funding Agreement and are regarded as appropriate for science agencies or for ANSTO specifically. Contains a glossary and an detailed index. tables., figures.

  4. The National Energy Technology Laboratory Annual Site Environmental Report for Calendar Year 2000

    International Nuclear Information System (INIS)

    This Site Environmental Report was prepared by the Environment, Safety, and Health Division at the National Energy Technology Laboratory (NETL) for the U.S. Department of Energy. The purpose of this report is to inform the public and Department of Energy stakeholders of the environmental conditions at the NETL sites in Morgantown, West Virginia, and Pittsburgh, Pennsylvania. This report contains the most accurate information that could be collected during the period between January 1, 2000, through December 31, 2000. As stated in DOE Orders 5400.1 and 231.1, the purpose of the report is to: Characterize site environmental management performance; Confirm compliance with environmental standards and requirements and Highlight significant facility programs and efforts

  5. The National Energy Technology Laboratory Annual Site Environmental Report for Calendar Year 2002

    International Nuclear Information System (INIS)

    This Site Environmental Report was prepared by the Environmental, Safety, and Health Division at the National Energy Technology Laboratory (NETL) for the U.S. Department of Energy. The purpose of this report is to inform the public and Department of Energy stakeholders of the environmental conditions at NETL sites in Morgantown (MGN), West Virginia, Pittsburgh (PGH), Pennsylvania, Tulsa, Oklahoma, and Fairbanks, Alaska. This report contains the most accurate information that could be collected during the period between January 1, 2002, and December 31, 2002. As stated in DOE Orders 450.1 and 231.1, the purpose of the report is to: (1) Characterize site environmental management performance. (2) Confirm compliance with environmental standards and requirements. (3) Highlight significant facility programs and efforts

  6. Australian Nuclear Science and Technology Organization. Annual Report 1995-1996

    International Nuclear Information System (INIS)

    The report provides an overview of the outcomes achieved and the current activities of ANSTO related to its core business activities. The core business of ANSTO were identified as follows: international strategic relevance of nuclear science; core facilities operation and development; applications of nuclear science and technology to the understanding of natural processes; treatment and management of man-made and naturally occurring radioactive substances; competitiveness and ecological sustainability of industry and organizational development and support. The report also include specific reporting against those performance indicators that were negotiated with the Government as part of the Triennium Funding Agreement and are regarded as appropriate for science agencies or for ANSTO specifically. Contains a glossary and an detailed index. tables., figures

  7. Rocky Flats Environmental Technology Site Ecological Monitoring Program 1995 annual report

    International Nuclear Information System (INIS)

    The Ecological Monitoring Program (ECMP) was established at the Rocky Flats Environmental Technology Site (Site) in September 1992. At that time, EcMP staff developed a Program Plan that was peer-reviewed by scientists from western universities before submittal to DOE RFFO in January 1993. The intent of the program is to measure several quantitative variables at different ecological scales in order to characterize the Rocky Flats ecosystem. This information is necessary to document ecological conditions at the Site in impacted and nonimpacted areas to determine if Site practices have had ecological impacts, either positive or negative. This information can be used by managers interested in future use scenarios and CERCLA activities. Others interested in impact analysis may also find the information useful. In addition, these measurements are entered into a database which will serve as a long-term information repository that will document long-term trends and potential future changes to the Site, both natural and anthropogenic

  8. Photovoltaic manufacturing technology (PVMaT). Annual subcontract report, March 31, 1994--June 30, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Holley, W A [Springborn Labs., Inc., Enfield, CT (United States)

    1996-01-01

    This report describes work performed under a subcontract to the National Renewable Energy Laboratory under the Photovoltaic Manufacturing Technology Project. The objectives of this subcontract are to (1) define the problem of yellowing/browning of EVA-based encapsulants; (2) determine probable mechanisms and the role of various parameters such as heat, UV exposure, module construction, EVA interfaces, and EVA thickness, in the browning of EVA-based encapsulants; (3) develop stabilization strategies for various module constructions to protect the encapsulant from degradative failure; (4) conduct laboratory, accelerated outdoor, and field testing of encapsulant, laminated test coupons, and full modules to demonstrate the functional adequacy of the stabilization strategies; and (5) implement these strategies. This report summarizes the accomplishments related to the above goals for the reporting period.

  9. The National Energy Technology Laboratory Annual Site Environmental Report for Calendar Year 2002

    Energy Technology Data Exchange (ETDEWEB)

    National Energy Technology Laboratory

    2003-10-30

    This Site Environmental Report was prepared by the Environmental, Safety, and Health Division at the National Energy Technology Laboratory (NETL) for the U.S. Department of Energy. The purpose of this report is to inform the public and Department of Energy stakeholders of the environmental conditions at NETL sites in Morgantown (MGN), West Virginia, Pittsburgh (PGH), Pennsylvania, Tulsa, Oklahoma, and Fairbanks, Alaska. This report contains the most accurate information that could be collected during the period between January 1, 2002, and December 31, 2002. As stated in DOE Orders 450.1 and 231.1, the purpose of the report is to: (1) Characterize site environmental management performance. (2) Confirm compliance with environmental standards and requirements. (3) Highlight significant facility programs and efforts.

  10. Rocky Flats Environmental Technology Site Ecological Monitoring Program 1995 annual report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-05-31

    The Ecological Monitoring Program (ECMP) was established at the Rocky Flats Environmental Technology Site (Site) in September 1992. At that time, EcMP staff developed a Program Plan that was peer-reviewed by scientists from western universities before submittal to DOE RFFO in January 1993. The intent of the program is to measure several quantitative variables at different ecological scales in order to characterize the Rocky Flats ecosystem. This information is necessary to document ecological conditions at the Site in impacted and nonimpacted areas to determine if Site practices have had ecological impacts, either positive or negative. This information can be used by managers interested in future use scenarios and CERCLA activities. Others interested in impact analysis may also find the information useful. In addition, these measurements are entered into a database which will serve as a long-term information repository that will document long-term trends and potential future changes to the Site, both natural and anthropogenic.

  11. Exploratory Technology Research Program for electrochemical energy storage: Annual report for 1993

    International Nuclear Information System (INIS)

    The U.S. Department of Energy's Office of Propulsion Systems provides support for an Electrochemical Energy Storage Program, that includes research and development (R ampersand D) on advanced rechargeable batteries and fuel cells. A major goal of this program is to develop electrochemical power sources suitable for application in electric vehicles (EVs). The program centers on advanced systems that offer the potential for high performance and low life-cycle costs, both of which are necessary to permit significant penetration into commercial markets. The DOE Electrochemical Energy Storage Program is divided into two projects: the Electric Vehicle Advanced Battery Systems (EVABS) Development Program and the Exploratory Technology Research (ETR) Program. The EVABS Program management responsibility has been assigned to Sandia National Laboratories (SNL); Lawrence Berkeley Laboratory (LBL) is responsible for management of the ETR Program. The EVABS and ETR Programs include an integrated matrix of R ampersand D efforts designed to advance progress on selected candidate electrochemical systems. The United States Advanced Battery Consortium (USABC), a tripartite undertaking between DOE, the U.S. automobile manufacturers and the Electric Power Research Institute (EPRI), was formed in 1991 to accelerate the development of advanced batteries for consumer EVs. The role of the FIR Program is to perform supporting research on the advanced battery systems under development by the USABC and EVABS Program, and to evaluate new systems with potentially superior performance, durability and/or cost characteristics. The specific goal of the ETR Program is to identify the most promising electrochemical technologies and transfer them to the USABC, the battery industry and/or the EVABS Program for further development and scale-up. This report summarizes the research, financial and management activities relevant to the ETR Program in CY 1993

  12. Exploratory Technology Research Program for electrochemical energy storage: Annual report for 1993

    Energy Technology Data Exchange (ETDEWEB)

    Kinoshita, K. [ed.

    1994-09-01

    The U.S. Department of Energy`s Office of Propulsion Systems provides support for an Electrochemical Energy Storage Program, that includes research and development (R&D) on advanced rechargeable batteries and fuel cells. A major goal of this program is to develop electrochemical power sources suitable for application in electric vehicles (EVs). The program centers on advanced systems that offer the potential for high performance and low life-cycle costs, both of which are necessary to permit significant penetration into commercial markets. The DOE Electrochemical Energy Storage Program is divided into two projects: the Electric Vehicle Advanced Battery Systems (EVABS) Development Program and the Exploratory Technology Research (ETR) Program. The EVABS Program management responsibility has been assigned to Sandia National Laboratories (SNL); Lawrence Berkeley Laboratory (LBL) is responsible for management of the ETR Program. The EVABS and ETR Programs include an integrated matrix of R&D efforts designed to advance progress on selected candidate electrochemical systems. The United States Advanced Battery Consortium (USABC), a tripartite undertaking between DOE, the U.S. automobile manufacturers and the Electric Power Research Institute (EPRI), was formed in 1991 to accelerate the development of advanced batteries for consumer EVs. The role of the FIR Program is to perform supporting research on the advanced battery systems under development by the USABC and EVABS Program, and to evaluate new systems with potentially superior performance, durability and/or cost characteristics. The specific goal of the ETR Program is to identify the most promising electrochemical technologies and transfer them to the USABC, the battery industry and/or the EVABS Program for further development and scale-up. This report summarizes the research, financial and management activities relevant to the ETR Program in CY 1993.

  13. Exploratory Technology Research Program for electrochemical energy storage. Annual report for 1991

    Energy Technology Data Exchange (ETDEWEB)

    Kinoshita, K. [ed.

    1992-06-01

    The US Department of Energy`s Office of Propulsion Systems provides support for an electrochemical energy storage program, that includes research and development (R&D) on advanced rechargeable batteries and fuel cells. A major goal of this program is to develop electrochemical power sources suitable for application in electric vehicles. The program centers on advanced systems that offer the potential for high performance and low life-cycle costs. The DOE Electrochemical Energy Storage Program is divided into two projects: the Electric Vehicle Advanced Battery Systems Development (EVABS) Program and the Exploratory Technology Research (ETR) Program. The EVABS Program management responsibility has been assigned to Sandia National Laboratory, and the Lawrence Berkeley Laboratory is responsible for management of the ETR Program. The EVABS and ETR Programs include an integrated matrix of R&D efforts designed to advance progress on several candidate electrochemical systems. The United States Advanced Battery Consortium (USABC), a tripartite undertaking between DOE, the US automobile manufacturers and the Electric Power Research Institute (EPRI), was formed in 1991 to accelerate the development of advanced batteries for consumer EVs. The role of the ETR Program is to perform supporting research on the advanced battery systems under development by the USABC and EVABS Program, and to evaluate new systems with potentially superior performance, durability and/or cost characteristics. The specific goal of the ETR Program is to identify the most promising electrochemical technologies and transfer them to the USABC, the battery industry and/or the EVABS Program for further development and scaleup. This report summarizes the research, financial and management activities relevant to the ETR Program in CY 1991.

  14. Annual report of nuclear technology and education center. April 1, 2003 - March 31, 2004

    International Nuclear Information System (INIS)

    This report summarizes the activities of Nuclear Technology and Education Center (NuTEC) is Japan Atomic Energy Research Institute in FY 2003. It includes the domestic educational activities and the international training activities mainly for Asia-Pacific region as well as the activities of the research and the development for training courses and administrative aspects. The courses yet carried out in Tokyo Education Center were begun to operate in the facilities of the Tokai Research Establishment. Aiming at carrying out training activities more effectively and efficiently, the training division system related to the training fields have started together with that. Most of the scheduled training courses for the FY2003 have been carried out as planned and the total number of the trainees completing the courses was 1,311. The building of the Tokyo Education Center was demolished and removed after the decontamination, decommissioning procedures. The land was returned to the land owner by the end of FY 2003. In addition to these activities, research and development for the improvement of education and training were carried out. (author)

  15. Neutron data for accelerator-driven transmutation technologies. Annual Report 2003/2004

    International Nuclear Information System (INIS)

    The project NATT, Neutron data for Accelerator-driven Transmutation Technology, is performed within the nuclear reactions group of the Dept. of Neutron Research, Uppsala univ. The activities of the group are directed towards experimental studies of nuclear reaction probabilities of importance for various applications, like transmutation of nuclear waste, biomedical effects and electronics reliability. The experimental work is primarily undertaken at the The Svedberg Laboratory (TSL) in Uppsala, where the group has previously developed two world-unique instruments, MEDLEY and SCANDAL. Highlights from the past year: Analysis and documentation has been finalized of previously performed measurements of elastic neutron scattering from hydrogen at 96 MeV. The results corroborate the normalization of previously obtained data at TSL, which have been under debate. This is of importance since this reaction serves as reference for many other measurements. Compelling evidence of the existence of three-body forces in nuclei has been obtained. Within the project, one PhD exam and one licentiate exam has been awarded. One PhD exam and one licentiate exam has been awarded for work closely related to the project. A new neutron beam facility with significantly improved performance has been built and commissioned at TSL

  16. Second annual report to Congress on the Automotive Technology Development Program

    Energy Technology Data Exchange (ETDEWEB)

    1980-09-30

    Progress in the Automotive Technology Development Program for the year ending September 30, 1980 is reported. This program is aimed at developing for commercialization advanced gas turbine (AGT) engines, advanced Stirling engines (ASE), and innovative, more efficient vehicles and vehicle components to use with advanced, energy-conserving automotive propulsion systems. For the AGT, the major accomplishments for this period included: awarded contracts for AGT development; completed reference powertrain design; initiated design and fabrication of testing facilities; and testing of components. For the ASE, design review is on schedule, and components have been tested up to 4000 h. A turbocompound diesel engine completed 54,000 miles of road testing and showed a 5% fuel economy improvement. Ten thousand miles of road testing a prototype Diesel Organic Rankine Bottoming Cycle in a heavy truck engine showed a 10% fuel economy gain. Three hundred standard GSA vehicles, operated with a Controlled Speed Accessory Drive showed, a 6 to 8% fuel economy gain. Four gas turbines have been installed in intercity buses, and five more are being installed in intracity buses in Baltimore. (LCL)

  17. Neutron data for accelerator-driven transmutation technologies. Annual Report 2003/2004

    Energy Technology Data Exchange (ETDEWEB)

    Blomgren, J.; Hildebrand, A.; Nilsson, L.; Mermod, P.; Olsson, N.; Pomp, S.; Oesterlund, M. [Uppsala Univ. (Sweden). Dept. for Neutron Research

    2004-08-01

    The project NATT, Neutron data for Accelerator-driven Transmutation Technology, is performed within the nuclear reactions group of the Dept. of Neutron Research, Uppsala univ. The activities of the group are directed towards experimental studies of nuclear reaction probabilities of importance for various applications, like transmutation of nuclear waste, biomedical effects and electronics reliability. The experimental work is primarily undertaken at the The Svedberg Laboratory (TSL) in Uppsala, where the group has previously developed two world-unique instruments, MEDLEY and SCANDAL. Highlights from the past year: Analysis and documentation has been finalized of previously performed measurements of elastic neutron scattering from hydrogen at 96 MeV. The results corroborate the normalization of previously obtained data at TSL, which have been under debate. This is of importance since this reaction serves as reference for many other measurements. Compelling evidence of the existence of three-body forces in nuclei has been obtained. Within the project, one PhD exam and one licentiate exam has been awarded. One PhD exam and one licentiate exam has been awarded for work closely related to the project. A new neutron beam facility with significantly improved performance has been built and commissioned at TSL.

  18. Neutron data for accelerator-driven transmutation technologies. Annual Report 2002/2003

    Energy Technology Data Exchange (ETDEWEB)

    Blomgren, J.; Hildebrand, A.; Mermod, P.; Olsson, N.; Pomp, S.; Oesterlund, M. [Uppsala Univ. (Sweden). Dept. for Neutron Research

    2003-08-01

    The project NATT, Neutron data for Accelerator-driven Transmutation Technology, is performed within the nuclear reactions group of the Department for neutron research, Uppsala university. The activities of the group is directed towards experimental studies of nuclear reaction probabilities of importance for various applications, like transmutation of nuclear waste, biomedical effects and electronics reliability. The experimental work is primarily undertaken at the The Svedberg Laboratory (TSL) in Uppsala, where the group has previously developed two world-unique instruments, MEDLEY and SCANDAL. Highlights from the past year: Analysis and documentation has been finalized of previously performed measurements of elastic neutron scattering from carbon and lead at 96 MeV. The precision in the results surpasses all previous data by at least an order of magnitude. These measurements represent the highest energy in neutron scattering where the ground state has been resolved. The results show that all previous theory work has underestimated the probability for neutron scattering at the present energy by 0-30 %. A new method for measurements of absolute probabilities for neutron-induced nuclear reactions with experimental techniques only has been developed. Previously, only two such methods have been known. One student has reached his PhD exam. Two PhD students have been accepted. TSL has decided to build a new neutron beam facility with significantly improved performance for these, and similar, activities. A new instrument for measurements of inelastic neutron scattering has been built, tested and found to meet the specifications. This work has been performed in collaboration with two French research groups from Caen and Nantes. The instrument is intended to be used for a series of experiments during the coming years. Previous work by the group on nuclear data for assessment of electronics reliability has lead to a new industry standard in the USA.

  19. Introductory speech of 2003 annual meeting on nuclear technology 'Acceptance - key to success'

    International Nuclear Information System (INIS)

    Acceptance and support are two basic preconditions for a successful implementation of projects. As a necessary prerequisite, the decisions to be taken must be based on established facts which are both transparent and understandable. Especially in technical projects, confidence in technology and in all parties involved is imperative. Nuclear power has lost acceptance when a small group of opponents, deliberately focusing on the improbable, but existing, risk gained support for this attitude in the public, and political circles began to share the same opinion. This makes it indispensable to regain broad-based acceptance by combining the dissemination of facts with instilling confidence. This includes the positive contribution of safe plant operation with a maximum of safety as the top priority, as an acknowledged and practiced approach. It also includes the dissemination of facts and the promotion of confidence on the part of all those engaged in nuclear power. Also energy policy in Germany should make decisions in a transparent, understandable fashion on the basis of proven facts. Opting out of the use of nuclear power, as well as the massive support granted to the expansion of renewable energies, are no adequate response to the challenges we are facing in energy policy. Irrespective of fundamental political opinions, nuclear competence in Germany must be preserved and supported. Moreover, the problems ahead, especially with respect to the management of nuclear waste, need to be addressed. International trends indicate a realistic assessment of nuclear power and interpretation of facts. Nuclear power is seen as an option for the future and either included as such in planning, or else is preserved as a building block in energy supply. (orig.)

  20. Australian Nuclear Science and Technology Organisation (ANSTO) Annual Report 2001-2002

    International Nuclear Information System (INIS)

    This report details outcomes, achievements and work underway. It has been a year of significant advancement with the awarding by ARPANSA in April of the Licence to Construct the Replacement Research Reactor at Lucas Heights after almost 10 years of substantiation and approval processes. Other operational highlights during the year included: the award of several facility licences by ARPANSA under their new procedures, including a licence for the ongoing operation of the HIFAR reactor and radiopharmaceutical production; the launch by the ANSTO business unit ARI in April 2002 of LeukoScan, a technetium-99m labelled diagnostic radiopharmaceutical for imaging infection; maintenance of Australia's leading role in the development of new nuclear safeguards procedures by cooperating with the International Atomic Energy Agency (IAEA) to become the first country to adopt integrated safeguards; formal accreditation of ANSTO as a member of the IAEA's Network of Analytical Laboratories, the network that supports the international nuclear safeguards program; construction of a purpose-built waste treatment and packaging facility to enable state-of-the-art processing for ANSTO's low level radioactive waste in preparation for removal to the national low-level radioactive waste repository. Scientific highlights included: ANSTO's development of two new technologies that will lead to cleaner and more environmentally sustainable operations for uranium processors; new methods for depositing ceramics coatings at low temperatures for applications ranging from fibre optic communications to corrosion and scratch resistance; ANSTO sustaining its position as a world leader in carbon dating samples following the introduction of new sample preparation procedures that dramatically reduce the influence of background levels on the result and studies that provided information relating to the management and sustainable development of fishing and mining in the marine environment. ANSTO scientists, in

  1. Feeding broodstocks different starfish diets affect growth and survival of larvae of trumpet shell ( Charonia lampas sauliae Reeve 1844)

    Science.gov (United States)

    Kang, Kyoungho; Kim, Malhee; Hong, Hyeran; Cha, Guyong; Sui, Zhenghong

    2016-10-01

    Trumpet shell ( Charonia lampas sauliae) (Mollusca, Heterogastropoda, Cymatidae) has extensive economic value. Studies on the artificial larval development of C. lampas sauliae for aquaculture utilization have become especially important due to the finite natural resources. In the present study, the growth and survival rate of the larvae of C. lampas sauliae broodstocks fed three types of starfish diets, Asterina pectinifera Müller & Troschel 1842, A. amurensis Lütken 1871 and their mixture were compared. The larval size increased gradually between day 10 and day 20 after hatching at 15°C and 20°C. No difference was found in body size and specific growth rate (SGR) (two-way ANOVA; P > 0.05). However, during transition from trochophore to veliger stage 20 days after hatching, significant increases in larval survival and growth rates were observed. The maximum survival rate was observed on day 10. The mean survival rate was 0.463, 0.730 and 0.515 at 15°C, and 0.369, 0.713 and 0.444 at 20°C when A. pectinifera, A. amurensis and their mixture were fed, respectively. The SGR and survival rate of the larvae were definitely influenced by the diets ( P < 0.05), and the effect of A. amurensis alone was higher than that of A. pectinifera alone and their mixture.

  2. 46{sup th} annual meeting on nuclear technology (AMNT 2015). Key topics / Outstanding know-how and sustainable innovations enhanced safety and operation excellence

    Energy Technology Data Exchange (ETDEWEB)

    Lamm, Matthias [AREVA GmbH, Erlangen (Germany). R and D; Hollands, Thorsten [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH, Garching (Germany). Reactor Safety Research Div.

    2016-01-15

    Summary report on the Technical Sessions ''Know-how, New Build and Innovations'' and ''Operation and Safety of Nuclear Installations, Fuel SA: WASA-BOSS + CESAM'' of the 46{sup th} Annual Conference on Nuclear Technology (AMNT 2015) held in Berlin, 5 to 7 May 2015. Other Sessions of AMNT 2015 have been covered in atw 7 to 12 (2015) and will be covered in further issues of atw.

  3. 46th Annual meeting on nuclear technology (AMNT 2015). Key topics / Outstanding know-how and sustainable innovations / Enhanced safety and operation excellence

    International Nuclear Information System (INIS)

    Summary report on the Topical Sessions ''CFD Simulations for Reactor Safety Relevant Objectives '' and ''Fuel Management During the Last Cycles and Beyond'' of the 46th Annual Conference on Nuclear Technology (AMNT 2015) held in Berlin, 5 to 7 May 2015. Other Sessions of AMNT 2015 have been covered in atw 7 to 10 (2015) and will be covered in further issues of atw.

  4. 46{sup th} Annual meeting on nuclear technology (AMNT 2015). Key topics / Outstanding know-how and sustainable innovations / Enhanced safety and operation excellence

    Energy Technology Data Exchange (ETDEWEB)

    Schaffrath, Andreas; Scheuerer, Martina [Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH (GRS), Garching (Germany); Oenneby Carina; Benjaminsson, Ulf [Westinghouse Electric Sweden AB, Vaesteraes (Sweden). Europe, Middle East and Africa (EMEA)

    2015-11-15

    Summary report on the Topical Sessions ''CFD Simulations for Reactor Safety Relevant Objectives '' and ''Fuel Management During the Last Cycles and Beyond'' of the 46th Annual Conference on Nuclear Technology (AMNT 2015) held in Berlin, 5 to 7 May 2015. Other Sessions of AMNT 2015 have been covered in atw 7 to 10 (2015) and will be covered in further issues of atw.

  5. 46th annual meeting on nuclear technology (AMNT 2015). Key topics / Outstanding know-how and sustainable innovations enhanced safety and operation excellence

    International Nuclear Information System (INIS)

    Summary report on the Technical Sessions ''Know-how, New Build and Innovations'' and ''Operation and Safety of Nuclear Installations, Fuel SA: WASA-BOSS + CESAM'' of the 46th Annual Conference on Nuclear Technology (AMNT 2015) held in Berlin, 5 to 7 May 2015. Other Sessions of AMNT 2015 have been covered in atw 7 to 12 (2015) and will be covered in further issues of atw.

  6. PTAC 2002 annual report : creating value through innovation : facilitating innovation, technology transfer, and collaborative research and development in the upstream oil and gas industry

    International Nuclear Information System (INIS)

    Petroleum Technology Alliance Canada (PTAC) is Canada's leading organization that helps in the development and transfer of petroleum technology. This annual report listed the key accomplishments of PTAC in 2002. These include a record participation in PTAC workshops and conferences, the co-hosting of the world's largest unconventional gas and coalbed methane conference with the Canadian Society for Unconventional Gas, and the co-hosting of a conference on climate change and greenhouse gas technology with Climate Change Central. In 2002 PTAC launched an Industrial Energy Audit Incentive with Natural Resources Canada. It also proposed an extension to its mandate to help energy efficiency and greenhouse gas technologies for the hydrocarbon energy industry. In addition, PTAC helped launch 32 research and development projects in 2002. PTAC expects that 2003 will see a shift in focus to sustainable, eco-efficiency and greenhouse gas-reducing technologies for the hydrocarbon energy industry. This annual report includes an auditor's report of PTAC's financial statements. The report includes summarized balance sheet of assets, liabilities/surplus and net assets. It also includes summarized statements of revenues, expenses and surplus for the year ended December 31, 2002 with comparative figures for 2001. 1 tab., 2 figs

  7. Monitoring and Evaluation of Supplemented Spring Chinook Salmon and Life Histories of Wild Summer Steelhead in the Grande Ronde Basin, 2007 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Boe, Stephen J.; Crump, Carrie A.; Weldert, Rey L. [Confederated Tribes of the Umatilla Indian Reservation

    2009-04-10

    This is the ninth annual report for a multi-year project designed to monitor and evaluate supplementation of endemic spring Chinook salmon in Catherine Creek and the upper Grande Ronde River. These two streams historically supported anadromous fish populations that provided significant tribal and non-tribal fisheries, but in recent years, have experienced severe declines in abundance. Conventional and captive broodstock supplementation methods are being used to restore these spring Chinook salmon populations. Spring Chinook salmon populations in Catherine Creek and the upper Grande Ronde River, and other streams in the Snake River Basin have experienced severe declines in abundance over the past two decades (Nehlsen et al. 1991). A supplementation program was initiated in Catherine Creek and the upper Grande Ronde River, incorporating the use of both captive and conventional broodstock methods, in order to prevent extinction in the short term and eventually rebuild populations. The captive broodstock component of the program (BPA Project 199801001) uses natural-origin parr collected by seining and reared to maturity at facilities near Seattle, Washington (Manchester Marine Laboratory) and Hood River, Oregon (Bonneville Hatchery). Spawning occurs at Bonneville Hatchery, and resulting progeny are reared in hatcheries. Shortly before outmigration in the spring, juveniles are transferred to acclimation facilities. After an acclimation period of about 2-4 weeks, volitional release begins. Any juveniles remaining after the volitional release period are forced out. The conventional broodstock component uses returning adults collected at traps near the spawning areas, transported to Lookingglass Hatchery near Elgin, Oregon, held, and later spawned. The resulting progeny are reared, acclimated, and released similar to the captive broodstock component. All progeny released receive one or more marks including a fin (adipose) clip, codedwire tag, PIT tag, or visual implant

  8. Annual Proceedings of Selected Research and Development Papers Presented at the Annual Convention of the Association for Educational Communications and Technology (35th, Louisville, Kentucky, 2012). Volume 1

    Science.gov (United States)

    Simonson, Michael, Ed.

    2012-01-01

    For the thirty-fifth year, the Research and Theory Division of the Association for Educational Communications and Technology (AECT) is sponsoring the publication of these Proceedings. Papers published in this volume were presented at the national AECT Convention in Louisville, Kentucky. The Proceedings of AECT's Convention are published in…

  9. Annual Proceedings of Selected Research and Development Papers Presented at the Annual Convention of the Association for Educational Communications and Technology (35th, Louisville, Kentucky, 2012). Volume 2

    Science.gov (United States)

    Simonson, Michael, Ed.

    2012-01-01

    For the thirty-fifth year, the Research and Theory Division of the Association for Educational Communications and Technology (AECT) is sponsoring the publication of these Proceedings. Papers published in this volume were presented at the national AECT Convention in Louisville, Kentucky. The Proceedings of AECT's Convention are published in…

  10. TECHNOLOGY IN WORK AND NON-WORK LIFE: TWO SIDES OF A COIN? : 72. Academy of Management Annual Meeting 2012

    NARCIS (Netherlands)

    Raeth, Philip; Mueller, Benjamin

    2012-01-01

    Today‘s omnipresence of technology leads to individuals using similar technology inside and outside of organizations. We suggest that the aspects of this technological copresence might affect technology-induced organizational change processes. We argue that the implications for organizations will re

  11. The effect of sea bream (Sparus aurata) broodstock and larval vaccination on the susceptibility by Photobacterium damsela subsp. piscicida and on the humoral immune parameters.

    Science.gov (United States)

    Hanif, A; Bakopoulos, V; Leonardos, I; Dimitriadis, G J

    2005-10-01

    Sea bream broodstock were immunised 1 or 2 months before spawning with a novel photobacteriosis vaccine. Sixty-seven-day-old larvae (mean weight 22.3 mg) originating from immunised and non-immunised parents were experimentally infected with the Photobacterium damsela subsp. piscicida (Phdp). Larvae from immunised fish showed delayed onset and lower mortality (66.67%) compared with larvae from control fish (80%). Eighty-nine-day-old larvae (mean weight 162.2 mg) from both groups were bath vaccinated with Phdp and Escherichia coli lipopolysaccharides (LPS) and larval samples were collected for measurement of humoral parameters. Larvae vaccinated with Phdp and LPS showed significantly higher anti-protease activity, lysozyme activity and total immunoglobulin compared to the controls. One-hundred-and-twenty-day-old larvae (mean weight 297.85 mg) from both parental groups were challenged with (LD70) virulent Phdp bacterial cells. Vaccinated larvae from both groups showed significantly less mortality compared to the respective controls. The RPS values of larvae from immunised parents vaccinated with Phdp and LPS was 95.83% and 72.22%, respectively. The RPS values of larvae from non-immunised parents vaccinated with Phdp and LPS was 62.5% and 70.83%, respectively. Results are discussed with respect to the beneficial effect of broodstock immunisation prior to spawning and the immunisation of larvae on their survival against photobacteriosis.

  12. MaTech - the BMFT ''new materials'' materials research program - 1994 annual report about new materials for innovative information technology, energy technology, traffic engineering, medical engineering and production engineering applications, and about general materials research and new fields

    International Nuclear Information System (INIS)

    This annual report gives a survey of projects supported within the framework of the Matfo and Ma-Tech programs. These projects focus on research into materials for innovative: 1. information technology, 2. energy technology, 3. traffic engineering, 4. medical engineering, and 5. production engineering applications and on 6. general materials research and new fields. The descriptions of individual projects indicate project goals and work schedules, names of important sub-contractors, and total costs and the funds contributed by BMFT. Information added in an annex includes inter alia a list of publications, lectures, contracts, or patents resulting from project activities in the year 1994. (MM)

  13. MaTech - the BMBF 'New materials' research program - 1995/96 annual report about new materials for innovative information technology, energy technology, traffic engineering, medical engineering and production engineering applications, and about general materials research and new fields

    International Nuclear Information System (INIS)

    This annual report gives a survey of projects supported within the framework of the MaTech program. These projects focus on research into materials for innovative: 1. information technology, 2. energy technology, 3. traffic engineering, 4. medical engineering, and 5. production engineering applications and on 6. general materials research and new fields. The descriptions of individual projects indicate project goals and work schedules, names of important sub-contractors, and total costs and the funds contributed by BMFT. Information added in an annex includes inter alia a list of publications, lectures, contracts, or patents resulting from project activities. (MM)

  14. Annual report on the research and development of silicon-photovoltaics technology, 1 July 1980-30 June 1981

    Energy Technology Data Exchange (ETDEWEB)

    Jao, S.S.; Cheng, C.; Kuo, C.T.; Juen, C.Y.; Tseng, H.H.; Tzeng, Y.C.; Chou, S.M.; Chang, H.H.

    1981-01-01

    The major results and achievements obtained on Research and Development of Silicon Photovoltaics Technology during the year from July 1, 1980 to June 30, 1981 by the solar energy group of Nuclear Instrumentation Division are reported. The important activities are: (1) overview of photovoltaics technology, (2) production of silicon photovoltaic modules, (3) solar cell fabrication technology, (4) module encapsulation technology, (5) photovoltaic power system, and (6) chemical vapor deposition technology.

  15. PTAC 2003 annual report : creating value through innovation : facilitating innovation, technology transfer, and collaborative research and development in the upstream oil and gas industry

    International Nuclear Information System (INIS)

    Petroleum Technology Alliance Canada (PTAC) is Canada's leading organization that helps in the development and transfer of petroleum technology. This annual report listed the key achievements in 2003, and presented an outlook for 2004. PTAC hosted 16 forums, workshops and conferences in 2003 which focused on specific needs or technical areas. The organization also facilitated 18 Technology Information Sessions in 2003 for members to promote interest, feedback and participation or funding for new research and development projects and to find industry partners. The projects launched in 2003 focused on the following issues: driving safety, e-business, emission reduction, eco-efficiency, environment, heavy oil, and innovation. In 2003, PTAC conducted a web survey and sent out two questionnaires to gain industry feedback on various topics. This annual report includes an auditor's report of PTAC's financial statements. The report includes summarized balance sheet of assets, liabilities/surplus and net assets. It also includes summarized statements of revenues, expenses and surplus for the year ended December 31, 2003 with comparative figures for 2002. 1 tab

  16. Relationship of Broodstock Weight and Hatching Yield of III. Generation (F3 Black Sea Trout (Salmo trutta labrax Pallas, 1814

    Directory of Open Access Journals (Sweden)

    Hakan Baki

    2015-07-01

    Full Text Available In this study, this was the aimed to determine the reproduction and hatching yields in different weight groups in hatchery origin rootstocks (F3 Black Sea trout (Salmo trutta labrax Pallas, 1814. In this study, the female fishes which produced from natural rootstock were used average weight 1437±134.6 g (Group I 2737±210.2 g (Group II and 3785±162.3 g (Group III. After the stripping process; according to the groups, were determined respectively eggs absolute fecundity (number of eggs/broodfish is average 2353±205, 5361±506, 6603±491, relative fecundity (number of eggs/kg is average1687±166, 1968±194, 1744±114. The egg diameter (mm 4.89±0.16, 5.28±0.07, 5.31±0.06 egg weight (mg 77±6, 90±4, 96±3 groups I., II. and III. respectively was calculated. The fertilization ratio (% 95.49±1.23, 96.49±1.14, 98.39±0.52, browse rate (% 79.97±5.36, 84.20±5.23, 94.70±1.50, has been identified. The output rate (% 60.57±7.86, 67.66±6.42, 84.83±3.09, the hatchery efficiency (% 58.14±7.95, 69.77±6.25, 83.51±3.29 was found. relative fecundity average value 168±160, 1968±194, 1744±114.The existence of relationship among the weight of the brood-stock, absolute fecundity (0.0198, 0.0012, 0.3499, and relative egg fecundity (0.3415, 0.0494, 0.00 was tested by regression analysis and consequently the difference between groups were significant. This was determined that between fish weight and absolute fecundity relationship is weak directly proportional for each group, between fish weight and relative fecundity is weak inversely proportional in Group I and II, the Group III is weak for directly proportional.

  17. Proceedings of the Third Annual Deep Brain Stimulation Think Tank: A Review of Emerging Issues and Technologies

    OpenAIRE

    Rossi, P. Justin; Gunduz, Aysegul; Judy, Jack; Wilson, Linda; Machado, Andre; James J Giordano; Elias, W. Jeff; Rossi, Marvin A.; Butson, Christopher L.; Fox, Michael D.; McIntyre, Cameron C.; Pouratian, Nader; Swann, Nicole C.; de Hemptinne, Coralie; Gross, Robert E.

    2016-01-01

    The proceedings of the 3rd Annual Deep Brain Stimulation Think Tank summarize the most contemporary clinical, electrophysiological, imaging, and computational work on DBS for the treatment of neurological and neuropsychiatric disease. Significant innovations of the past year are emphasized. The Think Tank's contributors represent a unique multidisciplinary ensemble of expert neurologists, neurosurgeons, neuropsychologists, psychiatrists, scientists, engineers, and members of industry. Present...

  18. Annual meeting on nuclear technology '88. Technical session on focal points of the atomic energy law and the radiation protection law in 1988

    International Nuclear Information System (INIS)

    This issue of Annual Meeting on Nuclear Technology reports presents the papers of the technical session on 'Focal points of the atomic energy law and the radiation protection law in 1988'. The titles are: Is there a binding link between decisions of the atomic energy authority and criminal law? Conclusions to be drawn from the Alkem case court decision. - Recent developments in atomic energy law. - Current radiation protection law. - Codetermination at plant level in a nuclear installation. - The legal position of foreigners from neigbour countries in the field of atomic energy law. The licensing of nuclear installations near the border. (RST)

  19. 46th Annual meeting on nuclear technology (AMNT 2015). Key topic / Enhanced safety and operation excellence / Sustainable reactor operation management - safe, efficient, valuable

    International Nuclear Information System (INIS)

    Summary report on the following Topical Session of the 46th Annual Conference on Nuclear Technology (AMNT 2015) held in Berlin, 5 to 7 May 2015: - Sustainable Reactor Operation Management - Safe, Efficient, Valuable (Erwin Fischer) The other Sessions of the Key Topics - ''Outstanding Know-How and Sustainable Innovations'', - ''Enhanced Safety and Operation Excellence'' and - ''Decommissioning Experience and Waste Management Solutions'' have been covered in atw 7 (2015) and will be covered in further issues of atw.

  20. Annual meeting on nuclear technology '90. Technical session 'Approaches to a solution of the CO2 problem - the contribution of nuclear energy'

    International Nuclear Information System (INIS)

    The report of the annual conference 'Nuclear Technology '90' contains six papers from the specialist session, which were all treated separately. The papers analyze the following subjects: CO2 and the consequences for energy policies; a tax on CO2 in a national context; climate change and the role of nuclear power as a contribution to a global solution (in English); the contribution of nuclear power in reducing the CO2 problem; problems of security with the extension of nuclear power; fuel supply and disposal with the extension of nuclear power. (HSCH)

  1. ASIST 2002 annual meeting

    CERN Multimedia

    Peek, R

    2003-01-01

    Review of discussions and presentations at the American Society for Information Science and Technology 2002 annual meeting. Topics covered included new models of scholarly publishing and the development of the semantic web (1 page).

  2. Annual report on reactor safety research projects sponsored by the Minister for Research and Technology of the Federal Republic of Germany 1989

    International Nuclear Information System (INIS)

    Investigations on the safety of light water reactors (LWR) being performed in the framework of his research program on reactor safety are sponsored by the Bundesminister fuer Forschung und Technologie (BMFT) (Federal Minister for Research and Technology). Objective of this program is to investigate in greater detail the safety margins of nuclear power plants and their systems and the further development of safety technology. Besides the investigations of LWR tasks also projects on the safety of advanced reactors are sponsored by the BMFT. The Gesellschaft fuer Reaktorsicherheit (GRS), (Society for Reactor Safety), by order of the BMFT, informs continuously of the status of such investigations by means of semi-annual and annual publication of progress reports within the series GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about objectives, the work performed, the results, the next steps of the work etc. The individual reports are prepared in a standard form by the contractors themselves as a documentation of their progress in work and published by the Forschungsbetreuung at the GRS, (FB) (Research Coordination Department), within the framework of general informations of progress in reactor safety research. The individual reports are classified according to the same classification system as applied in the nuclear index of the CEC (Commission of the European Communities) and the OECD (Organization for Economic Cooperation and Development). The reports are arranged in sequence of their project numbers. (orig./HP)

  3. Fusion technology development. Annual report to the US Department of Energy, October 1, 1996--September 30, 1997

    International Nuclear Information System (INIS)

    In FY97, the General Atomics (GA) Fusion Group made significant contributions to the technology needs of the magnetic fusion program. The work was supported by the Office of Fusion Energy Sciences, International and Technology Division, of the US Department of Energy. The work is reported in the following sections on Fusion Power Plant Studies (Section 2), Plasma Interactive Materials (Section 3), Magnetic Diagnostic Probes (Section 4) and RF Technology (Section 5). Meetings attended and publications are listed in their respective sections. The overall objective of GA's fusion technology research is to develop the technologies necessary for fusion to move successfully from present-day physics experiments to ITER and other next-generation fusion experiments, and ultimately to fusion power plants. To achieve this overall objective, we carry out fusion systems design studies to evaluate the technologies needed for next-step experiments and power plants, and we conduct research to develop basic knowledge about these technologies, including plasma technologies, fusion nuclear technologies, and fusion materials. We continue to be committed to the development of fusion power and its commercialization by US industry

  4. Compilation of contract research for the Chemical Engineering Branch, Division of Engineering Technology. Annual report for FY 1985

    International Nuclear Information System (INIS)

    This compilation of annual research reports by the contractors to the Chemical Engineering Branch, DET, is published to disseminate information from ongoing programs and covers research conducted during fiscal year 1985. The programs covered in this document include research on: (1) engineered safety feature (ESF) system effectiveness in terms of fission product retention under severe accident conditions; (2) effectiveness and safety aspects of selected decontamination methods; (3) decontamination impacts on solidification and waste disposal; (4) evaluation of nuclear facility decommissioning projects and concepts, and (5) operational schemes to prevent or mitigate the effects of hydrogen combustion during LWR accidents

  5. Reproductive broodstock performance and egg quality of wild-caught and first-generation domesticated Seriola rivoliana reared under same culture conditions

    Directory of Open Access Journals (Sweden)

    Marcos F Quiñones-Arreola

    2015-11-01

    Full Text Available Almaco jack, Seriola rivoliana as well as some related species is of great interest in marine fish aquaculture. However, there are few studies about their reproduction in captivity. In this research work, reproductive performance and egg quality in two groups of adult Seriola rivoliana, caught in the wild and domesticated-F1 analyzed and compared, reared under optimal maturation conditions in a commercial private Laboratory. A total of 28 wild adult (>5 kg were caught at La Paz Bay, Baja California Sur, Mexico, and 30 adult domesticated-F1 broodstock (>5 kg, were obtained from an original stock of 1,000 juveniles (3.5 g body weight produced at Kona Blue (Hawaii, USA sea farm. Fishes were transported to the Rancheros del Mar commercial private hatchery, where they were grown to adult size. Both groups were evaluated during eight months (May to December 2012 and compared in terms of reproduction performance (total number of spawning events, monthly spawning frequency, total number of eggs, total number of eggs per mL, and fertilization rate, egg biochemical composition (total proteins, total lipids, total carbohydrates, and triacylglycerides and egg diameter. Results indicated that wild caught broostock showed a better reproductive performance in terms of fertilization rate, total number of spawning, monthly spawning frequency and total number of eggs produced. However, biochemical composition and egg diameter did not show statistical differences (P < 0.05 between two groups. The reproductive performance of broodstock and quality of eggs analyzed in this study are important traits to improve the aquaculture management of this species.

  6. Does broodstock nutritional history affect the response of progeny to different first-feeding diets? A whole-body transcriptomic study of rainbow trout alevins.

    Science.gov (United States)

    Lazzarotto, Viviana; Corraze, Geneviève; Larroquet, Laurence; Mazurais, David; Médale, Françoise

    2016-06-01

    The whole-body transcriptome of trout alevins was characterised to investigate the effects of long-term feeding of rainbow trout broodstock females a diet free of fishmeal and fish oil on the metabolic capacities of progeny. Effects were studied before first feeding and after 3 weeks of feeding diets containing different proportions of marine and plant ingredients. Feeding alevins plant-based diets resulted in lower fish body weight, irrespective of maternal nutritional history. No differences in whole-body lipids were found between treatments, and the tissue fatty acid profile strongly reflected that of the respective broodstock or first-feeding diets. We showed that the maternal diet history did not significantly affect expressions of any genes before the first feeding. Interestingly, we found an effect of maternal nutritional history on gene expression in alevins after 3 weeks of feeding. The major differences in the transcriptome of alevins from plant-based diet-fed females compared with those from commercial-fed females were as follows: (i) down-regulation of genes involved in muscle growth/contraction and (ii) up-regulation of genes involved in carbohydrate and energy metabolism related to the delay in growth/development observed with plant-based diets. Our findings also showed an effect of the first-feeding diets, irrespective of maternal nutritional history. Specifically, the introduction of plant ingredients resulted in the up-regulation of genes involved in amino acid/protein and cholesterol metabolism and in differences in the expressions of genes related to carbohydrate metabolism. Information gained through this study opens up avenues for further reduction of marine ingredients in trout diets, including the whole rearing cycle. PMID:27112276

  7. Reservoir technology - geothermal reservoir engineering research at Stanford. Fifth annual report, October 1, 1984-September 30, 1985

    Energy Technology Data Exchange (ETDEWEB)

    Ramey, H.J. Jr.; Kruger, P.; Horne, R.N.; Miller, F.G.; Brigham, W.E.

    1985-09-01

    The objective is to carry out research on geothermal reservoir engineering techniques useful to the geothermal industry. A parallel objective is the training of geothermal engineers and scientists. The research is focused toward accelerated development of hydrothermal resources through the evaluation of fluid reserves, and the forecasting of field behavior with time. Injection technology is a research area receiving special attention. The program is divided into reservoir definition research, modeling of heat extraction from fractured reservoirs, application and testing of new and proven reservoir engineering technology, and technology transfer. (ACR)

  8. The Historically Black Colleges and Universities/Minority Institutions Environmental Technology Consortium annual report, 1991--1992

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1992-12-31

    The member institutions of the Consortium continue to play a significant role in increasing the number of African Americans who enter the environmental professions through the implementation of the Consortium`s RETT Plan for Research, Education, and Technology Transfer. The four major program areas identified in the RETT Plan are as follows: (1) minority outreach and precollege education; (2) undergraduate education and postsecondary training; (3) graduate and postgraduate education and research; and (4) technology transfer.

  9. Compilation of contract research for the Materials Engineering Branch, Division of Engineering Technology. Annual report for FY 1983. Vol.2

    International Nuclear Information System (INIS)

    This report presents summaries of the research work performed during Fiscal Year 1983 by laboratories and organizations under contracts administered by the NRC's Materials Engineering Branch, Office of Nuclear Regulatory Research. Each contractor has written a more complete and detailed annual report of their work which can be obtained by writing to NRC. The contractor reports are organized into the major areas of concern to Primary System Integrity, which is the main focus for the branch's research. These areas are: Vessel and Piping Fracture Mechanics; Pressure Vesel Surveillance Dosimetry; Steam Generators, Aging, and Environmental Cracking; and Non-Destructive Examination. The research programs reported provide information on the overall program objectives, a more limited scope of work for FY 1983, a technical description of the year's work, and a brief forecast of the plans for continuing work

  10. The Historically Black Colleges and Universities/Minority Institutions Environmental Technology and Waste Management Consortium annual report, 1990--1991

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-12-31

    The HBCU/MI Environmental Technology and Waste Management Consortium was established in January 1990, through a Memorandum of Understanding (MOU) among the member institutions. This group of research-oriented Historically Black Colleges and Universities and Minority Institutions (HBCU/MI) agreed to work together to initiate research, technology development and education programs to address the nation`s critical environmental problems. As a group the HBCU/MI Consortium is uniquely positioned to reach women and the minority populations of African Americans, Hispanics and American Indians. As part of their initial work, they developed the Research, Education, and Technology Transfer (RETT) Plan to actualize the Consortium`s guiding principles. In addition to developing a comprehensive research agenda, four major programs were begun to meet these goals. This report summarizes the 1990--1991 progress.

  11. Ghana Space Science and Technology Institute (GSSTI),Ghana Atomic Energy Commission: Annual Report 2013/2014

    International Nuclear Information System (INIS)

    The report presents the structure as well as the research projects of the newly established Ghana Space Science and Technology Institute of the Ghana Atomic Energy Commission from January to December 2014. Research projects listed are in the areas of Astronomy and Astrophysics; Remote Sensing; Electronics and Instrumentation; and Satellite Communication.

  12. The Transformation of Institutional Research as a Result of Improving Information Technology. AIR Annual 1984 Forum Paper.

    Science.gov (United States)

    Stevenson, Michael R.; Walleri, R. Dan

    The changing nature of institutional research due to the expanded use and capabilities of information technology was explored through a regional survey of institutional researchers, who indicated their involvement in information systems development. Results were analyzed for all respondents, by type of institution (four-year versus two-year), and…

  13. The Upside of an Annual Survey in Light of Involvement and Use: Evaluating the Advanced Technological Education Program

    Science.gov (United States)

    Toal, Stacie A.; Gullickson, Arlen R.

    2011-01-01

    In 1999, the National Science Foundation (NSF) awarded funds to the Evaluation Center at Western Michigan University to conduct an external evaluation of the Advanced Technological Education (ATE) program. ATE, a federally mandated program designed to increase the number and quality of skilled technicians in the U.S. workforce, has funded over 346…

  14. Utility advanced turbine systems (ATS) technology readiness testing -- Phase 3. Annual report, October 1, 1996--September 30, 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the US Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown.

  15. High-Temperature Gas-Cooled Reactor Technology Development Program: Annual progress report for period ending December 31, 1987

    Energy Technology Data Exchange (ETDEWEB)

    Jones, J.E.,Jr.; Kasten, P.R.; Rittenhouse, P.L.; Sanders, J.P.

    1989-03-01

    The High-Temperature Gas-Cooled Reactor (HTGR) Program being carried out under the US Department of Energy (DOE) continues to emphasize the development of modular high-temperature gas-cooled reactors (MHTGRs) possessing a high degree of inherent safety. The emphasis at this time is to develop the preliminary design of the reference MHTGR and to develop the associated technology base and licensing infrastructure in support of future reactor deployment. A longer-term objective is to realize the full high-temperature potential of HTGRs in gas turbine and high-temperature, process-heat applications. This document summarizes the activities of the HTGR Technology Development Program for the period ending December 31, 1987.

  16. High-temperature gas-cooled reactor technology development program. Annual progress report for period ending December 31, 1982

    Energy Technology Data Exchange (ETDEWEB)

    Kasten, P.R.; Rittenhouse, P.L.; Bartine, D.E.; Sanders, J.P.

    1983-06-01

    During 1982 the High-Temperature Gas-Cooled Reactor (HTGR) Technology Program at Oak Ridge National Laboratory (ORNL) continued to develop experimental data required for the design and licensing of cogeneration HTGRs. The program involves fuels and materials development (including metals, graphite, ceramic, and concrete materials), HTGR chemistry studies, structural component development and testing, reactor physics and shielding studies, performance testing of the reactor core support structure, and HTGR application and evaluation studies.

  17. Ames Infusion Stories for NASA Annual Technology Report: Nano Entry System for CubeSat-Class Payloads

    Science.gov (United States)

    Smith, Brandon; Jan, Darrell Leslie; Venkatapathy, Etiraj

    2015-01-01

    The Nano Entry System for CubeSat-Class Payloads led to the development of the Nano-Adaptable Deployable Entry and Placement Technology ("Nano-ADEPT"). Nano-ADEPT is a mechanically deployed entry, descent, and landing (EDL) system that stows during launch and cruise (like an umbrella) and serves as both heat shield and primary structure during EDL. It is especially designed for small spacecraft where volume is a limiting constraint.

  18. High-temperature gas-cooled reactor technology development program. Annual progress report for period ending December 31, 1982

    International Nuclear Information System (INIS)

    During 1982 the High-Temperature Gas-Cooled Reactor (HTGR) Technology Program at Oak Ridge National Laboratory (ORNL) continued to develop experimental data required for the design and licensing of cogeneration HTGRs. The program involves fuels and materials development (including metals, graphite, ceramic, and concrete materials), HTGR chemistry studies, structural component development and testing, reactor physics and shielding studies, performance testing of the reactor core support structure, and HTGR application and evaluation studies

  19. The Historically Black Colleges and Universities/Minority Institutions Environmental Technology Consortium annual report 1994--1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-07-01

    The HBCU/MI ET Consortium was established in January 1990, through a Memorandum of Understanding (MOU) among its member institutions. This group of research oriented Historically Black Colleges and Universities and Minority Institutions (HBCU/MIs) agreed to work together to initiate or revise education programs, develop research partnerships with public and private sector organizations, and promote technology development to address the nation`s critical environmental contamination problems. The Consortium`s Research, Education and Technology Transfer (RETT) Plan became the working agenda. The Consortium is a resource for collaboration among the member institutions and with federal an state agencies, national and federal laboratories, industries, (including small businesses), majority universities, and two and four-year technical colleges. As a group of 17 institutions geographically located in the southern US, the Consortium is well positioned to reach a diverse group of women and minority populations of African Americans, Hispanics and American Indians. This Report provides a status update on activities and achievements in environmental curriculum development, outreach at the K--12 level, undergraduate and graduate education, research and development, and technology transfer.

  20. SP-100 thermionic technology program annual integrated technical progress report for the period ending September 30, 1984

    Energy Technology Data Exchange (ETDEWEB)

    Holland, J.W. (ed.)

    1984-11-01

    The thermionic technology program addresses the feasibility issues of a seven-year-life thermionic fuel element (TFE) for the SP-100 Thermionic Reactor Space Power System. These issues relate to the extension of TFE lifetime from three to seven years, one of the SP-100 requirements. The technology to support three-year lifetimes was demonstrated in the earlier TFE development program conducted in the late-1960s and 1970s. Primary life-limiting factors were recognized to be thermionic emitter dimensional increases due to swelling of the nuclear fuel and electrical structural damage from fast neutrons. The 1984-85 technology program is investigating the fueled emitter and insulator lifetime issues, both experimentally and analytically. The goal is to analytically project the lifetime of the fueled emitter and insulator and to experimentally verify these projection methods. In 1984, the efforts were largely devoted to the design and building of fueled emitters for irradiation in 1985, validation of fuel-emitter models, development of irradiation-resistant metal-ceramic seal and sheath insulator, modeling of insulator lifetime, and development of wide-spread, high-performance thermionic converters.

  1. Annual Report 2005

    International Nuclear Information System (INIS)

    The Annual Report of the Institute of Nuclear Chemistry and Technology (Warsaw, Poland) describes the activities of the Institute in 2005. The document consist of four parts: (1) Radiation chemistry and physics, radiation technologies; (2) Radiochemistry, stable isotopes, nuclear analytical methods, general chemistry; (3) Radiobiology; (4) Nuclear technologies and methods. In total - 73 detailed papers prepared by the Institute workers and collaborating scientists are presented. General information on the Institute status, personnel activity and the international cooperation is also listed

  2. Federal Coordinating Council on Science, Engineering and Technology, Committee on Computer Research and Applications, Subcommittee on Science and Engineering Computing: Annual report, 1987

    Energy Technology Data Exchange (ETDEWEB)

    1988-03-01

    In the past year the committee initiated efforts that resulted in the report ''A Research and Development Strategy for High Performance Computing'' and will presently provide a government-wide implementation plan to address the technological opportunities possible with the achievement of significantly enhanced supercomputer capability. The committee met on a regular basis to review government supported programs in research, development and application of new supercomputer technology. The Committee annually visits supercomputer manufacturers to be briefed on their plans for future generation machines. Cray Research and ETA Systems continue to make progress toward developing more advanced supercomputers. The US supercomputer manufacturers remain dependent upon their emerging Japanese competitors for high performance IC'S although progress has been made toward achieving more adequate domestic sourcing. Reports by the Defense Science Board and the National Security Council/Economic Policy Council, which addressed semiconductor issues, were completed during the year with advice and input from the Committee. IBM has re-entered the supercomputer marketplace. The current 3090 series with expandable vector processing capability has achieved a low end position in the supercomputer performance spectrum. Subsequent development and marketing by IBM of more powerful machines would have important and far reaching impact on the domestic and world supercomputer market. Computers with massively parallel architecture--thousands of processors--are entering the market place and are beginning to become more of a factor in the computational productivity scale.

  3. The Historically Black Colleges and Universities/Minority Institutions Environmental Technology Consortium annual report, 1992--1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-12-31

    The HBCU/MI Consortium was formed (1) to respond to national R and D, policy formulation and minority manpower needs in environmental technology, hazardous, solid and mixed waste materials management, environmental restoration, and environmental health; and (2) to address limited minority participation in the public, private and non-profit environmental industries; limited environmental awareness among minorities; minimal interaction between HBCUs/MIs and majority universities, industry and interest groups; limited institutional development in environmental education and research; and lack of minority technical businesses in the environmental industry. This report gives progress made for the 92--93 period.

  4. The Internet Time Lag: Anticipating the Long-Term Consequences of the Information Revolution. A Report of the Annual Aspen Institute Roundtable on Information Technology (10th, Aspen, Colorado, August 2-5, 2001).

    Science.gov (United States)

    Schwartz, Evan I.

    This is a report of the 10th annual Aspen Institute Roundtable on Information Technology (Aspen, Colorado, August 2-5, 2001). Participants were also polled after the events of September 11, and these comments have been integrated into the report. The mission of this report is to take a wide-ranging look at the trends that are defining the next new…

  5. Progress report on nuclear science and technology in China (Vol.2). Proceedings of academic annual meeting of China Nuclear Society in 2011, No.10--nuclear Information sub-volume

    International Nuclear Information System (INIS)

    Progress report on nuclear science and technology in China (Vol. 2) includes 698 articles which are communicated on the second national academic annual meeting of China Nuclear Society. There are 10 books totally. This is the tenth one, the content is about nuclear Information and computer applications

  6. Science, Technology, and American Diplomacy 1985. Sixth Annual Report Submitted to the Congress by the President Pursuant to Section 503(b) of Title V of Public Law 95-426. Serial E.

    Science.gov (United States)

    Department of State, Washington, DC.

    The Reagan administration's annual report to the Congress on international activities in the fields of science and technology (S&T) for fiscal year 1984 consists of three parts. The two chapters in part I (S&T in American diplomacy) examine S&T in American foreign policy and resources necessary for successful diplomacy. The two chapters in part II…

  7. Progress report on nuclear science and technology in China (Vol.2). Proceedings of academic annual meeting of China Nuclear Society in 2011, No.4--nuclear material sub-volume

    International Nuclear Information System (INIS)

    Progress report on nuclear science and technology in China (Vol. 2) includes 698 articles which are communicated on the second national academic annual meeting of China Nuclear Society. There are 10 books totally. This is the fourth one, the content is about nuclear material.

  8. Progress report on nuclear science and technology in China (Vol.2). Proceedings of academic annual meeting of China Nuclear Society in 2011, No.6--computational physics sub-volume

    International Nuclear Information System (INIS)

    Progress report on nuclear science and technology in China (Vol. 2) includes 698 articles which are communicated on the second national academic annual meeting of China Nuclear Society. There are 10 books totally. This is the sixth one, the content is about computational physics

  9. Annual Report 2007

    International Nuclear Information System (INIS)

    The Annual Report of the Institute of Nuclear Chemistry and Technology (Warsaw, Poland) describes achievements of the Institute in 2007 obtained in seven fields: (1) radiation chemistry and physics, radiation technologies; (2) radiochemistry, stable isotopes, nuclear analytical methods, general chemistry; (3) radiobiology; (4) nuclear technologies and methods: process engineering; (5) nuclear technologies and methods: material engineering, structural studies, diagnostics; (6) nuclear technologies and methods: nucleonic control systems and accelerators. In total - 76 detailed papers prepared by the Institute workers and collaborating scientists are presented. General information on the Institute status, personnel activity, international cooperation and publications are also given

  10. Inertial confinement fusion target component fabrication and technology development support: Annual report, October 1, 1995--September 30, 1996

    International Nuclear Information System (INIS)

    On December 30, 1990, the U.S. Department of Energy entered into a contract with General Atomics (GA) to be the Inertial Confinement Fusion (ICF) Target Component Fabrication and Technology Development Support contractor. In September 1995 this contract ended and a second contract was issued for us to continue this ICF target support work. This report documents the technical activities of the period October 1, 1995 through September 30, 1996. During this period, GA and our partners WJ Schafer Associates (WJSA) and Soane Technologies, Inc. (STI) were assigned 14 formal tasks in support of the Inertial Confinement Fusion program and its five laboratories. A portion of the effort on these tasks included providing direct open-quotes Onsite Supportclose quotes at Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratory (LANL), and Sandia National Laboratory Albuquerque (SNLA). We fabricated and delivered over 800 gold-plated hohlraum mandrels to LLNL, LANL and SNLA. We produced nearly 1,200 glass and plastic target capsules for LLNL, LANL, SNLA and University of Rochester/Laboratory for Laser Energetics (UR/LLE). We also delivered over 100 flat foil targets for Naval Research Lab (NRL) and SNLA in FY96. This report describes these target fabrication activities and the target fabrication and characterization development activities that made the deliveries possible. The ICF program is anticipating experiments at the OMEGA laser and the National Ignition Facility (NIF) which will require capsules containing cryogenic layered D2 or deuterium-tritium (DT) fuel. We are part of the National Cryogenic Target Program to create and demonstrate viable ways to generate and characterize cryogenic layers. Substantial progress has been made on ways to both create and characterize viable layers. During FY96, significant progress was made in the design of the OMEGA Cryogenic Target System that will field cryogenic targets on OMEGA

  11. 南海区驯养条石鲷亲鱼的初次性成熟和产卵%First maturation and spawning of cultured Oplegnathus fasciatus broodstock in the South China Sea

    Institute of Scientific and Technical Information of China (English)

    区又君; 李加儿; 林锋

    2014-01-01

    2008年4月初在广东省饶平县对2006年5月人工孵化和培育的2龄条石鲷( Oplegnathus fasciatus)成熟亲鱼进行激素诱导,研究和观察条石鲷亲鱼初次性成熟的繁殖生物学。结果显示,在南海区全人工养殖的条石鲷亲鱼初次性成熟年龄为2龄,成熟亲鱼的最小型为全长245 mm、体质量610 g,最大个体为全长300 mm、体质量1450 g;产卵季节为4月10日~7月15日,产卵盛期为4月中旬至6月下旬;为升温产卵型鱼类,产卵温度为20.0~28.8℃,适宜的产卵温度为20.7~27.6℃;雌、雄亲鱼发育同步,个体大小和成熟年龄差别不大;雌鱼属于一年一次分批产卵类型,产卵期超过3个月;24尾初次性成熟雌性亲鱼的总产卵量为3180.0×104粒,日最高产卵量为341.5×104粒;其产卵量和受精卵质量与水温的变化关系密切,受精卵的浮卵率随温度的变化而变化,在水温相对衡定时,浮卵率相对稳定并维持在80%~95%的较高水平;受精卵平均卵径为(0.860±0.023)mm,油球径为(0.191±0.009)mm。%In early April of 2008,we carried out hormone inducement in 2-year-old Oplegnathus fasciatus broodstocks hatched in May of 2006 in Raoping of Guangdong Province,so as to investgate their reproductive biology for first maturation. Results show that in the South China Sea,it took 2 years for the first maturation with biological minimum size of 245 mm in total length and 610 g in weight, maximum size being 300 mm and 1 450 g for the O. fasciatus broodstocks by complete artificial breeding. Spawning season was from A-pril 10 to July 15 with the peak period from middle April to late June. Being a thermo-dependent spawning type,the breeding tempera-ture of the fish ranged from 20. 0~28. 8 ℃ with suitable temperature of 20. 7~27. 6 ℃. Development was synchronous for both sexes and no significant difference was found in size and mature age. Being an annual spawning multiplicity

  12. Annual report to the working group on technology, growth and employment. Summit Working Group on Controlled Thermonuclear Fusion

    International Nuclear Information System (INIS)

    The Summit Working Group in Controlled Thermonuclear Fusion was established in 1983 in response to the Declaration of the Heads of State and Government at the Versailles Economic Summit meeting of 1982 (Appendix A), and in response to the subsequent report of the Working Group in Technology, Growth and Employment (TGE) as endorsed at the Williamsburg Summit meeting, 1983. Representatives appointed by the governments of the seven Economic Summit countries (Canada, France, the Federal Republic of Germany, Italy, Japan, the United Kingdom and the United States) and a representative of the Commission of the European Communities met in Washington, DC on September 29 and 30, 1983 under the co-leadership of the United States and the European Communities. A report of the conclusions of this meeting has been published and a progress report was included in the TGE Working Group report to the 1984 London Summit (Appendix B). Following the London Summit, the fusion Working Group met in Brussels July 5 and 6 to consider the implementation of collaborative projects taking into account the conclusions issued in the Communique from London (Appendix C) and the recommendations of the TGE report

  13. Cast polycrystalline silicon photovoltaic module manufacturing technology improvements. Annual subcontract report, 1 January 1996--31 December 1996

    Energy Technology Data Exchange (ETDEWEB)

    Wohlgemuth, J. [Solarex Corp., Frederick, MD (United States)

    1997-10-01

    This report describes Solarex`s accomplishments during this phase of the Photovoltaic Manufacturing Technology (PVMaT) program. During this reporting period, Solarex researchers converted 79% of production casting stations to increase ingot size and operated them at equivalent yields and cell efficiencies; doubled the casting capacity at 20% the cost of buying new equipment to achieve the same capacity increase; operated the wire saws in a production mode with higher yields and lower costs than achieved on the ID saws; purchased additional wire saws; developed and qualified a new wire-guide coating material that doubles the wire-guide lifetime and produces significantly less scatter in wafer thickness; ran an Al paste back-surface-field process on 25% of all cells in manufacturing; completed environmental qualification of modules using cells produced by an all-print metallization process; qualified a vendor-supplied Tedlar/ethylene vinyl acetate (EVA) laminate to replace the combination of separate sheets of EVA and Tedlar backsheet; substituted RTV adhesive for the 3M Very High Bond tape after several field problems with the tape; demonstrated the operation of a prototype unit to trim/lead attach/test modules; demonstrated the use of light soldering for solar cells; demonstrated the operation of a wafer pull-down system for cassetting wet wafers; and presented three PVMaT-related papers at the 25th IEEE Photovoltaic Specialists Conference.

  14. PVMaT improvements in the Solarex photovoltaic module manufacturing technology: Annual subcontract report: May 5, 1998 -- April 30, 1999

    Energy Technology Data Exchange (ETDEWEB)

    Wohlgemuth, J.

    2000-01-10

    This report describes work done by Solarex during the first year of this subcontract. The objective of this three-year PVMaT program is to continue the advancement of Solarex PV manufacturing technologies to design and implement a process that produces polycrystalline silicon PV modules that can be sold profitably for $2.00 per peak watt or less and that will increase the production capacity of the Frederick plant to at least 25 megawatts per year. Accomplishments during the first year of the program include: (1) Verification of the process to produce SiF{sub 4}, the precursor to silicon feedstock. (2) Design of a silicon feedstock pilot facility using the SiNaF process. (3) Development of and transfer to manufacturing of a process to use thinner wire in the wire saw. (4) Completion of a production trial with recycled SiC. (5) Laboratory development of a selective emitter process using rapid thermal processing. (6) Fabrication of high-efficiency polycrystalline cells using silicon nitride from three different sources. (7) Development of a new encapsulation formulation and laboratory demonstration of a 6-minute lamination cycle. (8) Implementation of an automated laminator. (9) Laboratory demonstration of automated handling of ceramics.

  15. Inertial confinement fusion target component fabrication and technology development support. Annual report, October 1, 1994--September 30, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Hoppe, M. [ed.

    1996-05-01

    On December 30, 1990, the US Department of Energy entered into a contract with General Atomics (GA) to be the Inertial Confinement Fusion (ICF) Target Component Fabrication and Technology Development Support contractor. This report documents the technical activities of the period October 1, 1994 through September 30, 1995. During this period, GA was assigned 15 tasks in support of the Inertial Confinement Fusion program and its laboratories. A portion of the effort on these tasks included providing direct ``Onsite Support`` at Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratory (LANL), and Sandia National Laboratory Albuquerque (SNLA). The ICF program is anticipating experiments at the National Ignition Facility (NIF) and the OMEGA Upgrade. Both facilities will require capsules containing layered D{sub 2} or deuterium-tritium (D-T) fuel. The authors are part of the National Cryogenic Target Program to create and demonstrate viable ways to generate and characterize cryogenic layers. Progress has been made on ways to both create viable layers and to characterize them. They continued engineering, assembly and testing of equipment for a cryogenic target handling system for University of Rochester`s Laboratory for Laser Energetics (UR/LLE) that will fill, transport, layer, and characterize targets filled with cryogenic fuel, and insert these cryogenic targets into the OMEGA Upgrade target chamber for laser implosion experiments. This report summarizes and documents the technical progress made on these tasks.

  16. Inertial confinement fusion target component fabrication and technology development support. Annual report, October 1, 1994--September 30, 1995

    International Nuclear Information System (INIS)

    On December 30, 1990, the US Department of Energy entered into a contract with General Atomics (GA) to be the Inertial Confinement Fusion (ICF) Target Component Fabrication and Technology Development Support contractor. This report documents the technical activities of the period October 1, 1994 through September 30, 1995. During this period, GA was assigned 15 tasks in support of the Inertial Confinement Fusion program and its laboratories. A portion of the effort on these tasks included providing direct ''Onsite Support'' at Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratory (LANL), and Sandia National Laboratory Albuquerque (SNLA). The ICF program is anticipating experiments at the National Ignition Facility (NIF) and the OMEGA Upgrade. Both facilities will require capsules containing layered D2 or deuterium-tritium (D-T) fuel. The authors are part of the National Cryogenic Target Program to create and demonstrate viable ways to generate and characterize cryogenic layers. Progress has been made on ways to both create viable layers and to characterize them. They continued engineering, assembly and testing of equipment for a cryogenic target handling system for University of Rochester's Laboratory for Laser Energetics (UR/LLE) that will fill, transport, layer, and characterize targets filled with cryogenic fuel, and insert these cryogenic targets into the OMEGA Upgrade target chamber for laser implosion experiments. This report summarizes and documents the technical progress made on these tasks

  17. Japanese Journal of Paper Technology. `98 Technology Annual (machinery, equipment, engineering, maintenance, laboratory utilities, chemical); Kami pulp gikyo times. 1998 nendo gijutsu manual (kikai shizai yakuhin soran)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-08-11

    The general survey of the 1998 technology manual on machinery/materials/chemicals was made public. In the part of machinery/materials, the following are included: pulp manufacturing machine/equipment, used paper treatment/stuff preparation machine/equipment, dedusting/cleaning/concentrating equipment, stuff pump/chemicals pump, paper machine and related equipment, paper machine related tools/machinery/materials, finishing machine/handling equipment, processing facility/processing finishing facilities, equipment for secondary processing/paper product making, measuring control/test analysis equipment/facility, utility/environment related equipment/facility, safety equipment/other related equipment/machinery/materials, etc. In the part of chemicals, assistants for cooking/decoloration/used paper treatment, sizing agent, paper strength reinforcing/paper quality improving agents, filler/pigment, dye/color pigment, inorganic/synthetic fiber, work improving agent, antiseptics/antifungal agent, felt cleaner, antiforming agent, freeness/yield improving agents, flocculant, various assistants, utility use chemicals, functionalizer, processing agent, coating/laminate/chemicals for paper product making, etc. 630 figs, 76 tabs.

  18. Captura y mantención de Dissostichus eleginoides para conformar un plantel de reproductores Capture and maintenance of Dissostichus eleginoides to establish a broodstock group

    Directory of Open Access Journals (Sweden)

    Alberto Reyes

    2012-11-01

    Full Text Available Se reportan resultados en la captura, transporte y mantención de ejemplares vivos de bacalao de profundidad (Dissostichus eleginoides Smitt, 1898, para conformar un plantel de reproductores, destinados a emprender el cultivo experimental de este importante pez marino. Se enfatiza las causas de mortalidad y tasas de sobrevivencia post-captura en el mar. En tres años de experiencia se obtuvo una sobrevivencia general de 13% en promedio, de tres campanas de captura, y un período de tres años de mantención de los peces en estanques de 30 m³ en tierra, en un sistema de agua de mar circulante con control de factores ambientales. La mortalidad en los tanques ocurrió principalmente en el periodo inicial hasta lograr la adaptación en el hábitat artificial.We report results in the capture, transport and maintenance of live toothfish (Dissostichus eleginoides Smitt, 1898, to form a broodstock, for undertaking the experimental cultivation of this valuable marine fish. Emphasis is made in the causes of mortality and survival rates post capture at sea. In three years of experience was obtained an overall survival of 13% on the average, in three campaigns of capture, and a three-year maintenance of fish in 30 m³ ponds on land, in an environmental factors controlled circulating seawater system. The tanks mortality occurred mainly in the initial period to achieve adaptation in artificial habitats.

  19. Inertial confinement fusion target component fabrication and technology development support: Annual report, October 1, 1993--September 30, 1994

    Energy Technology Data Exchange (ETDEWEB)

    Hoppe, M. [ed.

    1995-04-01

    On December 30, 1990, the US Department of Energy entered into a contract with General Atomics (GA) to be the Inertial Confinement Fusion (ICF) Target Component Fabrication and Technology Development Support contractor. During the period, GA was assigned 17 tasks in support of the Inertial Confinement Fusion program and its laboratories. This year they achieved full production capabilities for the micromachining, dimensional characterization and gold plating of hohlraums. They fabricated and delivered 726 gold-plated mandrels of 27 different types to LLNL and 48 gold-plated mandrels of two different types to LANL. They achieved full production capabilities in composite capsule production ad delivered in excess of 240 composite capsules. They continuously work to improve performance and capabilities. They were also directed to dismantle, remove, and disposition all equipment at the previous contractor (KMSF) that had radioactive contamination levels low enough that they could be exposed to the general public without radiological constraints. GA was also directed to receive and store the tritium fill equipment. They assisted LANL in the development of techniques for characterization of opaque targets. They developed deuterated and UV-opaque polymers for use by the University of Rochester`s Laboratory for Laser Energetics (UR/LLE) and devised a triple-orifice droplet generator to demonstrate the controlled-mass nature of the microencapsulation process. The ICF program is anticipating experiments at NIF and the Omega Upgrade. Both facilities will require capsules containing layered D{sub 2} or D-T fuel. They continued engineering and assembly of equipment for a cryogenic target handling system for UR/LLE that will fill, transport, layer, and characterize targets filled with cryogenic deuterium or deuterium-tritium fuel, and insert these cryogenic targets into the OMEGA Upgrade target chamber for laser implosion experiments.

  20. Inertial Confinement Fusion Target Component Fabrication and Technology Development report. Annual report, October 1, 1992--September 30, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Steinman, D. [ed.

    1994-03-01

    On December 30, 1990, the US Department of Energy entered into a contract with General Atomics (GA) to be the Inertial Confinement Fusion Target Component Fabrication and Technology Development Support contractor. This report documents the technical activities which took place under this contract during the period of October 1, 1992 through September 30, 1993. During this period, GA was assigned 18 tasks in support of the Inertial Confinement Fusion program and its laboratories. These tasks included ``Capabilities Activation`` and ``Capabilities Demonstration`` to enable us to begin production of glass and composite polymer capsules. Capsule delivery tasks included ``Small Glass Shell Deliveries`` and ``Composite Polymer Capsules`` for Lawrence Livermore National Laboratory (LLNL) and Los Alamos National Laboratory (LANL). We also were asked to provide direct ``Onsite Support`` at LLNL and LANL. We continued planning for the transfer of ``Micromachining Equipment from Rocky Flats`` and established ``Target Component Micromachining and Electroplating Facilities`` at GA. We fabricated over 1100 films and filters of 11 types for Sandia National Laboratory and provided full-time onsite engineering support for target fabrication and characterization. We initiated development of methods to make targets for the Naval Research Laboratory. We investigated spherical interferometry, built an automated capsule sorter, and developed an apparatus for calorimetric measurement of fuel fill for LLNL. We assisted LANL in the ``Characterization of Opaque b-Layered Targets.`` We developed deuterated and UV-opaque polymers for use by the University of Rochester`s Laboratory for Laser Energetics (UR/LLE) and devised a triple-orifice droplet generator to demonstrate the controlled-mass nature of the microencapsulation process.

  1. Inertial Confinement Fusion Target Component Fabrication and Technology Development Support. Annual report, January 1, 1991--September 30, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Steinman, D. [ed.

    1993-03-01

    On December 31, 1990, the US Department of Energy entered into a contract with General Atomics (GA) to be the Inertial Confinement Fusion (ICF) Target Component Fabrication and Technology Development Support contractor. This report documents the technical activities of the period January 1, 1991 through September 30, 1992. During this period, GA was assigned 15 tasks in support of the Inertial Confinement Fusion program and its laboratories. These tasks included Facilities Activation, Staff Development, and Capabilities Validation to establish facilities and equipment, and demonstrate capability to perform ICF target fabrication research, development and production activities. The capabilities developed and demonstrated are those needed for fabrication and precise characterization of polymer shells and polymer coatings. We made progress toward production capability for glass shells, barrier layer coatings, and gas idling of shells. We fabricated over 1000 beam diagnostic foil targets for Sandia National Laboratory Albuquerque and provided full-time on-site engineering support for target fabrication and characterization. We initiated development of methods to fabricate polymer shells by a controlled mass microencapsulation technique, and performed chemical syntheses of several chlorine- and silicon-doped polymer materials for the University of Rochester`s Laboratory for Laser Energetics (UR/LLE). We performed the conceptual design of a cryogenic target handling system for UR/LLE that will fill, transport, layer, and characterize targets filled with cryogenic deuterium or deuterium-tritium fuel, and insert these cryogenic targets into the OMEGA-Upgrade target chamber for laser implosion experiments. This report summarizes and documents the technical progress made on these tasks.

  2. Inertial confinement fusion target component fabrication and technology development support: Annual report, October 1, 1993--September 30, 1994

    International Nuclear Information System (INIS)

    On December 30, 1990, the US Department of Energy entered into a contract with General Atomics (GA) to be the Inertial Confinement Fusion (ICF) Target Component Fabrication and Technology Development Support contractor. During the period, GA was assigned 17 tasks in support of the Inertial Confinement Fusion program and its laboratories. This year they achieved full production capabilities for the micromachining, dimensional characterization and gold plating of hohlraums. They fabricated and delivered 726 gold-plated mandrels of 27 different types to LLNL and 48 gold-plated mandrels of two different types to LANL. They achieved full production capabilities in composite capsule production ad delivered in excess of 240 composite capsules. They continuously work to improve performance and capabilities. They were also directed to dismantle, remove, and disposition all equipment at the previous contractor (KMSF) that had radioactive contamination levels low enough that they could be exposed to the general public without radiological constraints. GA was also directed to receive and store the tritium fill equipment. They assisted LANL in the development of techniques for characterization of opaque targets. They developed deuterated and UV-opaque polymers for use by the University of Rochester's Laboratory for Laser Energetics (UR/LLE) and devised a triple-orifice droplet generator to demonstrate the controlled-mass nature of the microencapsulation process. The ICF program is anticipating experiments at NIF and the Omega Upgrade. Both facilities will require capsules containing layered D2 or D-T fuel. They continued engineering and assembly of equipment for a cryogenic target handling system for UR/LLE that will fill, transport, layer, and characterize targets filled with cryogenic deuterium or deuterium-tritium fuel, and insert these cryogenic targets into the OMEGA Upgrade target chamber for laser implosion experiments

  3. Thin-Film CIGS Photovoltaic Technology: Annual Technical Report-Phase II, 16 April 1999-15 April 2000

    Energy Technology Data Exchange (ETDEWEB)

    Delahoy, A.E.; Bruns, J.; Ruppert, A.; Akhtar, M.; Chen, L.; Kiss, Z.J.

    2000-08-24

    A summary of Energy Photovoltaics' Phase II work includes the following: (1) EPV has demonstrated that it can sputter a Mo back-contact capable of supporting very high efficiency cell processing. Using EPV Mo, NREL has deposited a 17.1% CIGS cell (no AR coating). EPV believes it can identify the signature of ``good'' Mo. The Mo was produced on EPV's 0.43 m{sup 2} pilot-line equipment; (2) EPV has performed compound synthesis for several classes of materials, namely non-Cu precursor materials, Cu-containing materials, and ternary buffer materials. Using a ternary compound synthesized at EPV (ZIS) as an evaporation source material for the buffer layer, a Cd-free CIGS device has been produced having an efficiency of 11.5% (560 mV, 32.1 mA/cm{sup 2}, FF 64.3%). The ZIS films are photoconductive, and the devices exhibit no dark-light crossover or light soaking effects; (3) EPV initiated the interest of the University of Oregon in capacitance spectroscopy of CIGS devices. An Urbach tail with characteristic energy E0 < 20meV was identified by transient photocapacitance spectroscopy; (4) Small-area CIGS devices were produced in the pilot-line system with an efficiency of 12.0% (581 mV, 30.1 mA/cm{sup 2}, FF 68.7%), and in an R and D-scale system with 13.3% efficiency (569 mV, 34.1 mA/cm{sup 2}, FF 68.1%); (5) An improved linear evaporation source for Cu delivery has been developed and was used for CIGS formation in the pilot-line system. The deposition width is 45 cm. This technological ``tour de force'' allows EPV to build large-area CIGS systems possessing considerable flexibility. In particular, both EPV's FORNAX process and NREL's 3-stage process have been implemented on the pilot line. A CIGS thickness uniformity of 7% over a 40 cm width has been achieved; (6) A 4-head linear source assembly was designed, constructed, and is in use. Flux monitoring is practiced; (7) Large-area CIGS modules were produced with Voc's up to 36

  4. Steel and Aluminum Energy Conservation and Technology Competitiveness Act of 1988: Annual report of the metals initiative for fiscal year 1996

    International Nuclear Information System (INIS)

    This annual report has been prepared for the President and Congress describing the activities carried out under the Steel and Aluminum Energy Conservation and Technology Competitiveness Act of 1988, commonly referred to as the Metals Initiative. The Act has the following purposes: (1) increase energy efficiency and enhance the competitiveness of the American steel, aluminum, and copper industries; and (2) continue research and development efforts begun under the U.S. Department of Energy (DOE) program known as the Steel Initiative. These activities are detailed in a subsequent section. Other sections describe the appropriation history, the distribution of funds through fiscal year 1996, and the estimated funds necessary to continue projects through fiscal year 1997. The Metals Initiative supported four research and development projects with the U.S. Steel industry: (1) steel plant waste oxide recycling and resource recovery by smelting, (2) electrochemical dezincing of steel scrap, (3) rapid analysis of molten metals using laser-produced plasmas, and (4) advanced process control. There are three Metals Initiative projects with the aluminum industry: (1) evaluation of TiB2-G cathode components, (2) energy efficient pressure calciner, and (3) spray forming of aluminum. 1 tab

  5. Steel and Aluminum Energy Conservation and Technology Competitiveness Act of 1988: Annual report of the metals initiative for fiscal year 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-01-01

    This annual report has been prepared for the President and Congress describing the activities carried out under the Steel and Aluminum Energy Conservation and Technology Competitiveness Act of 1988, commonly referred to as the Metals Initiative. The Act has the following purposes: (1) increase energy efficiency and enhance the competitiveness of the American steel, aluminum, and copper industries; and (2) continue research and development efforts begun under the U.S. Department of Energy (DOE) program known as the Steel Initiative. These activities are detailed in a subsequent section. Other sections describe the appropriation history, the distribution of funds through fiscal year 1996, and the estimated funds necessary to continue projects through fiscal year 1997. The Metals Initiative supported four research and development projects with the U.S. Steel industry: (1) steel plant waste oxide recycling and resource recovery by smelting, (2) electrochemical dezincing of steel scrap, (3) rapid analysis of molten metals using laser-produced plasmas, and (4) advanced process control. There are three Metals Initiative projects with the aluminum industry: (1) evaluation of TiB2-G cathode components, (2) energy efficient pressure calciner, and (3) spray forming of aluminum. 1 tab.

  6. Annual Report 2008

    International Nuclear Information System (INIS)

    The Annual Report of the Institute of Nuclear Chemistry and Technology (Warsaw, Poland) describes achievements of the Institute in 2008 obtained in six fields: (1) radiation chemistry and physics, radiation technologies, (2) radiochemistry, stable isotopes, nuclear analytical methods, general chemistry, (3) radiobiology, (4) nuclear technologies and methods: process engineering, (5) nuclear technologies and methods: material engineering, structural studies, diagnostics, (6) nucleonic control systems and accelerators. In total - 76 detailed papers prepared by the Institute workers and collaborating scientists are presented. General information on the Institute status, personnel activity, international cooperation and publications are also given

  7. Annual report 2000

    International Nuclear Information System (INIS)

    This year 2000 annual report of the CEA (atomic energy commissariat) gives a general overview of the CEA activities and organization in the domains of the defence, the nuclear energy the technological research and the fundamental research. It is presented in seven main parts: contribution to national defence, civil nuclear research, technological research for the industry, pushing back the frontiers of scientific knowledge in physics and life science, mastery of installations; institute for protection and nuclear safety, research resources. (A.L.B.)

  8. 2008 annual merit review

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2009-01-18

    The 2008 DOE Vehicle Technologies Program Annual Merit Review was held February 25-28, 2008 in Bethesda, Maryland. The review encompassed all of the work done by the Vehicle Technologies Program: a total of 280 individual activities were reviewed, by a total of just over 100 reviewers. A total of 1,908 individual review responses were received for the technical reviews, and an additional 29 individual review responses were received for the plenary session review.

  9. ELETRONUCLEAR - Annual report - 1997

    International Nuclear Information System (INIS)

    The annual activities report of 1997 of ELETRONUCLEAR - Brazilian company responsible by the electric power generation from the nuclear technology - introduces the next main topics: company vision and mission; energy production and commercialization; investments in the electric power generation; economic and financial situation; social balancing; and patrimonial balancing

  10. Annual report 1987

    OpenAIRE

    Machena, C.

    1987-01-01

    The 1987 Annual Report of the Lake Kariba Fisheries Research Institute details the various research projects conducted during the year, which covered the following topics: ecology of the submerged vascular vegetation; biology and population dynamics of the butter catfish; post-harvest fish technology and management; sardine population structure; and analysis of the inshore fish.

  11. Scientific annual report 1980 DESY

    International Nuclear Information System (INIS)

    This annual report contains a survey about the organization of DESY, a description of the different experiments performed at DESY and the developments in accelerator technology and data processing, as well as a list of publications and speeches. (HSI)

  12. NOAA Average Annual Salinity (3-Zone)

    Data.gov (United States)

    California Department of Resources — The 3-Zone Average Annual Salinity Digital Geography is a digital spatial framework developed using geographic information system (GIS) technology. These salinity...

  13. Vegetable agroforestry - technology: Annual report

    OpenAIRE

    Palada, Manuel C.

    2008-01-01

    In Taiwan, field evaluation of vegetable species and varieties under Agroforestry system continued at AVRDC Organic Farm. Six vegetables (cauliflower, cucumber, eggplant, lettuce, sweet corn and yard long bean) were grown during the fall-winter season (October to December 2007) and winter-spring (January to March 2008) season. Vegetables were grown between tree hedgerows (alleys) and in control plots (no trees). Organic fertilizers (compost) were superimposed as sub-treatments. Varieties with...

  14. Genetic variation in the mitochondrial genome of the giant grouper Epinephelus lanceolatus (Bloch, 1790 and its application for the identification of broodstock

    Directory of Open Access Journals (Sweden)

    Seng S. Cheng

    2015-11-01

    Full Text Available Mitochondrial DNA (mtDNA markers are ideal for the validation of maternal inheritance and the identification of brood-stock in aquaculture breeding programs. The complete mitochondrial genomes of 11 species of grouper are currently available at the GenBank. This study was directed towards the characterization of mtDNA loci which can be applied for identification of interspecific F1 hybrids developed from Epinephelus fuscoguttatus and Epinephelus lanceolatus in aquaculture breeding programs. DNA was extracted from the fin clip of one specimen of E. lanceolatus which the source of sperm for the artificial spawning of the interspecific F1 hybrid E. fuscoguttatus × E. lanceolatus. Specific primers were designed to amplify the DNA after comparative analysis of the mtDNA genomes available at the GenBank. The primers were applied to test for cross-amplification in F1 hybrids as well as in the maternal parent E. fuscoguttatus (Forsskål, 1775 and the genetically related species Epinephelus coioides and Epinephelus corallicola (Valenciennes, 1828. DNA sequence analysis revealed that the Malaysian variety of E. lanceolatus exhibited variation at 11 of the 13 ORFs when compared to the variety from Taiwan. A distinct segmented duplication was observed in the D-loop region which was determined to be unique to the E. lanceolatus specimen obtained from Sabah, Malaysia. Cross amplification of mtDNA loci in the groupers E. fuscoguttatus, E. coioides, E. corallicola and the F1 hybrid of E. fuscoguttatus × E. lanceolatus revealed distinct profiles for each of the species with a clear indication that mtDNA were inherited from the maternal parent of the F1 hybrid.. mtDNA loci can be applied by fish breeders to determine interspecific hybridization events.

  15. CEA - Annual report 2006

    International Nuclear Information System (INIS)

    The CEA, a prominent player in research development and innovation, is active in 3 main areas: energy, health care and information technology and defense and security. This annual report presents the CEA activity for the year 2006 in these three main areas: Science and technology working for nuclear deterrence and global security (the simulation programs, the nuclear warheads, the nuclear propulsion, the decommissioning, the fighting against nuclear proliferation and monitoring international treaties, the global security); health and information technology (micro and nano technologies and systems); energy from nuclear fission and fusion and other technologies that do not emit greenhouse gases (progress for the nuclear industry, sustainable management of radioactive materials and waste, nuclear systems of the future, new energy technologies). (A.L.B.)

  16. CEA Annual report 2007

    International Nuclear Information System (INIS)

    The CEA, a prominent player in research development and innovation, is active in three main domains: energy, health care and information technology, defense and security. This annual report presents the CEA activities for the year 2007 in these three main areas: science and technology working for nuclear deterrence and global security, the energies without greenhouse effect gases emission against the climatic change, researches in the information sciences and technologies for a better communication and health. The CEA safety, organization, communication and international relations are also presented. (A.L.B.)

  17. Book of Program and Abstracts of the 45th Annual Meeting of the Israel Physical Society and the Second Conference of the Israel Plasma Science and Technology Association

    International Nuclear Information System (INIS)

    This is the book of abstracts of the 45th annual meeting of the Israel Physical Society. Some of the subjects are: condensed matter; atomic and nuclear physics; quantum mechanics; particles and fields; quantum optics and plasma physics

  18. SciDAC's Earth System Grid Center for Enabling Technologies Semi-Annual Progress Report for the Period April 1, 2009 through September 30, 2009

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Dean N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Foster, I. T. [Argonne National Lab. (ANL), Argonne, IL (United States); Middleton, D. E. [National Center for Atmospheric Research (NCAR), Boulder, CO (United States)

    2009-10-15

    This report summarizes work carried out by the ESG-CET during the period April 1, 2009 through September 30, 2009. It includes discussion of highlights, overall progress, period goals, collaborations, papers, and presentations. To learn more about our project, and to find previous reports, please visit the Earth System Grid Center for Enabling Technologies (ESG-CET) website. This report will be forwarded to the DOE SciDAC program management, the Office of Biological and Environmental Research (OBER) program management, national and international collaborators and stakeholders (e.g., the Community Climate System Model (CCSM), the Intergovernmental Panel on Climate Change (IPCC) 5th Assessment Report (AR5), the Climate Science Computational End Station (CCES), the SciDAC II: A Scalable and Extensible Earth System Model for Climate Change Science, the North American Regional Climate Change Assessment Program (NARCCAP), and other wide-ranging climate model evaluation activities). During this semi-annual reporting period, the ESG-CET team continued its efforts to complete software components needed for the ESG Gateway and Data Node. These components include: Data Versioning, Data Replication, DataMover-Lite (DML) and Bulk Data Mover (BDM), Metrics, Product Services, and Security, all joining together to form ESG-CET's first beta release. The launch of the beta release is scheduled for late October with the installation of ESG Gateways at NCAR and LLNL/PCMDI. Using the developed ESG Data Publisher, the ESG II CMIP3 (IPCC AR4) data holdings - approximately 35 TB - will be among the first datasets to be published into the new ESG enterprise system. In addition, the NCAR's ESG II data holdings will also be published into the new system - approximately 200 TB. This period also saw the testing of the ESG Data Node at various collaboration sites, including: the British Atmospheric Data Center (BADC), the Max-Planck-Institute for Meteorology, the University of Tokyo

  19. Renewable energy annual 1995

    International Nuclear Information System (INIS)

    The Renewable Energy Annual 1995 is the first in an expected series of annual reports the Energy Information Administration (EIA) intends to publish to provide a comprehensive assessment of renewable energy. This report presents the following information on the history, status, and prospects of renewable energy data: estimates of renewable resources; characterizations of renewable energy technologies; descriptions of industry infrastructures for individual technologies; evaluations of current market status; and assessments of near-term prospects for market growth. An international section is included, as well as two feature articles that discuss issues of importance for renewable energy as a whole. The report also contains a number of technical appendices and a glossary. The renewable energy sources included are biomass (wood), municipal solid waste, biomass-derived liquid fuels, geothermal, wind, and solar and photovoltaic

  20. Renewable energy annual 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    The Renewable Energy Annual 1995 is the first in an expected series of annual reports the Energy Information Administration (EIA) intends to publish to provide a comprehensive assessment of renewable energy. This report presents the following information on the history, status, and prospects of renewable energy data: estimates of renewable resources; characterizations of renewable energy technologies; descriptions of industry infrastructures for individual technologies; evaluations of current market status; and assessments of near-term prospects for market growth. An international section is included, as well as two feature articles that discuss issues of importance for renewable energy as a whole. The report also contains a number of technical appendices and a glossary. The renewable energy sources included are biomass (wood), municipal solid waste, biomass-derived liquid fuels, geothermal, wind, and solar and photovoltaic.

  1. Annual Report 2005

    International Nuclear Information System (INIS)

    The Annual Report of the Institute of Atomic Energy describes the results of the research activities carried out in 2005. The document consist of seven parts: General Information; Operation and safety of MARIA reactor; Radiological protection and dosimetry; Nuclear Technology in Energy Generation; Solid State Physics; Nuclear techniques in Health and Environment Protection management of Hazards and in last section the list of published in 2004 papers, conferences, seminars, workshops, research projects and educational activities are presented

  2. Risoe annual report 1987

    International Nuclear Information System (INIS)

    An explanation of Risoe National Laboratory's function within the Danish research system is followed by brief accounts of research activities at Risoe during 1987. Energy resources, technology and policy are discussed, the annual accounts are presented, a guide to the National Laboratory and a list of its publications are given. Some of the research activities that took place in 1987 described in more detail are within the fields of chemistry and the environment, superconductivity, new aspects of powdery mildew, polymers and robotics. (AB)

  3. Annual report 2005

    International Nuclear Information System (INIS)

    Areva is a world energy expert on technological solutions for nuclear power generation and electricity transmission and distribution. This 2005 annual report provides information on the Group results in the following domains: information pertaining to the transaction, general information on the company and share capital, information on company operations, new developments and future prospects, assets, financial position, financial performance, corporate governance, recent developments and outlook. (A.L.B.)

  4. Annual Report 2007

    International Nuclear Information System (INIS)

    The Annual Report of the Institute of Atomic Energy describes the results of the research activities carried out in 2007. The document consist of eight parts: General Information; Operation and safety of MARIA reactor; Radiation protection and dosimetry; Nuclear technology in energy generation; Condensed matter physics; Nuclear techniques in health and environment protection management of hazards; Radioisotope center POLATOM and in last section in which the lists of published in 2007 papers, conferences, seminars, workshops, research projects and educational activities are presented

  5. Annual Report 2006

    International Nuclear Information System (INIS)

    The Annual Report of the Institute of Atomic Energy describes the results of the research activities carried out in 2006. The document consist of seven parts: General Information; Operation and safety of MARIA reactor; Radiation protection and dosimetry; Nuclear Technology in Energy Generation; Solid State Physics; Nuclear techniques in Health and Environment Protection management of Hazards and in last section the list of published in 2006 papers, conferences, seminars, workshops, research projects and educational activities are presented

  6. Annual report 2002

    International Nuclear Information System (INIS)

    This annual report presents the CEA (Atomic Energy Research Center) activities and research programs during the year 2002. the first part is devoted to the scientific development in the defense, nuclear energy, technology, fundamental research and valuation domains. The second and third parts present respectively the development conditions with the environment safety and the means of development with the human resources, the information technology, the training and the public relations. The fourth part situates the Cea enterprise in the economy and the fifth part the Cea development in the Europe and the world. The last part is the financial accounting. (A.L.B.)

  7. 1997 annual report

    International Nuclear Information System (INIS)

    This 1997 issue of the annual report of the French Commissariat a l'Energie Atomique (CEA) gives a general overview of the CEA organization, activities, human resources, international relations and communication with some budgetary information. The main activities described concern the national defence, the fuel cycle, the nuclear reactors, the nuclear protection and safety, the advanced technologies, the quasi-particles, the effects of ionizing radiations on humans, the medical imagery, the transfer of technology, the protection and valorization of knowledge, the radioactive wastes and spent fuels management, the training and teaching, the scientific prizes, the committees, councils and commissions. (O.M.)

  8. 1996 annual report

    International Nuclear Information System (INIS)

    This 1996 issue of the annual report of the French Commissariat a l'Energie Atomique (CEA) gives a general overview of CEA organization, activities, human resources, international relations and external communication with some budgetary informations. The main activities described concern the national defence, the fuel cycle, the nuclear reactors, the condensed matter and life sciences, the advanced technologies, the protection and transfer of knowledge and technologies, the environmental activities, the management and processing of nuclear wastes, the nuclear protection and safety, the technical and scientific information, the teaching and training, the scientific prizes, the committees, councils and commissions. (J.S.)

  9. Annual Report 2011

    International Nuclear Information System (INIS)

    The PNRI Annual Report summarizes the institute's yearly progress in nuclear research and development projects, services, regulations, technology transfers and information dissemination on the peaceful applications of nuclear science and technology. The establishment and future operation of the Technetium 99m Generator Facility and the Electron Beam Facility will enhance the institute's capabilities. The PNRI has made great strides in agricultural and environmental research, helping to improve crop growth and water resource management. It served more clients availing of irradiation and other services, and was vigilant in monitoring incidents in the Southeast Asian region to preserve national nuclear safety and security

  10. Annual Report 2006

    International Nuclear Information System (INIS)

    The Annual Report of the Institute of Nuclear Chemistry and Technology (Warsaw, Poland) describes achievements of the Institute in 2006 obtained in seven fields: (1) radiation chemistry and technology, (2) radiochemistry and coordination chemistry, (3) radiobiology, (4) application of nuclear methods in material and process engineering, (5) design of instruments based on nuclear techniques, (6) trace analysis and radioanalytical techniques, (7) environmental research. In total - 83 detailed papers prepared by the Institute workers and collaborating scientists are presented. General information on the Institute status, personnel activity, international cooperation and publications are presented

  11. GKSS annual report 1987

    International Nuclear Information System (INIS)

    GKSS-Forschungszentrum Geesthacht GmbH, one of the national research centers, carries out R and D work on conservation of resources and environment, improvement of working conditions and on increase of economic competitiveness. The activities fall into the fields energy research and technology, basic technologies, marine research and techniques, health-environment-biotechnology. The annual report contains selected research work in summaries, the report on R and D work in reactor safety, materials research, environmental and climate research as well as environmental, and underwater techniques, describes the research institutes, cooperation with external partners, the organization, the budget, personnel, publications, including patent applications, and lectures. (HK)

  12. CEA 2009 annual report

    International Nuclear Information System (INIS)

    After an indication of several key figures about the activity of the CEA (Centre d'Etudes Atomiques) and its relationship with the academic as well as the industrial field, in France and worldwide, this 2009 annual report presents its various research programs in the field of defence and of global security: basic research (nuclear weapons and propulsion, struggle against proliferation and terrorism) and applied research (nuclear deterrence, national and international security). Then, it presents the programs in the field of de-carbonated energy: basic research (in material science and in life sciences) and applied research (fission energy, fusion energy, new energy technologies). A last group of research programs deals with information and health technologies and concerns life and material sciences, micro- and nano-technologies, software technologies. Interaction with other research institutions and bodies is also evoked. A brief scientific assessment is proposed. Finally, the different structures building the CEA are presented

  13. Annual Report 2010

    International Nuclear Information System (INIS)

    The Annual Report of the Institute of Nuclear Chemistry and Technology (Warsaw, Poland) describes achievements of the Institute in 2010 obtained by three Centres and eight Laboratories, namely: (1) Centre for Radiation Research and Technology, (2) Centre of Radiochemistry and Nuclear Chemistry, (3) Centre of Radiobiology and Biological Dosimetry, (4) Laboratory of Nuclear Analytical Methods, (5) Laboratory of Material Research, (6) Pollution Control Technologies Laboratory, (7) Laboratory of Stable and Environmental Isotopes, (8) Laboratory for Measurements of Technological Doses, (9) Laboratory for Detection of Irradiated Food and (10) Laboratory of Nuclear Control Systems and Methods. In total - 32 detailed papers prepared by the Institute workers and collaborating scientists are presented. General information on the Institute status, personnel activity, international cooperation and publications are presented.

  14. Annual Report 2009

    International Nuclear Information System (INIS)

    The Annual Report of the Institute of Nuclear Chemistry and Technology (Warsaw, Poland) describes achievements of the Institute in 2009 obtained in ten laboratories: (1) Centre for Radiation Research and Technology, (2) Centre of Radiochemistry and Nuclear Chemistry, (3) Centre of Radiobiology and Biological Dosimetry, (4) Laboratory of Nuclear Analytical Methods, (5) Laboratory of Material Research, (6) Pollution Control Technologies Laboratory, (7) Laboratory of Stable and Environmental Isotopes, (8) Laboratory for Measurements of Technological Doses, (9) Laboratory for Detection of Irradiated Food, (10) Laboratory of Nuclear Control Systems and Methods. In total - 49 detailed papers prepared by the Institute staff and collaborating scientists are presented. General information on the Institute status, personnel activity, international cooperation and publications are also given.

  15. Technology

    Directory of Open Access Journals (Sweden)

    Xu Jing

    2016-01-01

    Full Text Available The traditional answer card reading method using OMR (Optical Mark Reader, most commonly, OMR special card special use, less versatile, high cost, aiming at the existing problems proposed a method based on pattern recognition of the answer card identification method. Using the method based on Line Segment Detector to detect the tilt of the image, the existence of tilt image rotation correction, and eventually achieve positioning and detection of answers to the answer sheet .Pattern recognition technology for automatic reading, high accuracy, detect faster

  16. Annual report on reactor safety research projects sponsored by the Ministry for Research and Technology of the Federal Republic of Germany. Reporting period 1993. Progress report

    International Nuclear Information System (INIS)

    The Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, by order of the BMFT, informs continuously of the status of such investigations by means of semi-annual and annual publication of progress reports within the series GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about objectives, the work performed, the results, the next steps of the work etc. The individual reports are prepared in a standard form by the contractors themselves as a documentation of their progress in work and published by the Forschungsbetreuung at the GRS, (FB) (Research Coordination Department), within the framework of general information of progress in reactor safety research. The individual reports are classified according to the same classification system as applied in the nuclear index of the CEC (Commission of the European Communities) and the OECD (Organization for Economic Cooperation and Development). The reports are arranged in sequence of their project numbers. (orig./HP)

  17. New materials for key technologies of the 21st century. Programme of the Federal Minister of Education, Science, Research and Technology (BMBF). Annual report 1996/'97 on new materials for innovative applications in informaton engineering, energy engineering, traffic engineering, medical engineering, production engineering and interdisciplinary and new tasks of materials research

    International Nuclear Information System (INIS)

    This annual report gives a survey of projects supported within the framework of the MaTech program. These projects focus on research into materials for innovative: 1. information technology, 2. energy technology, 3. traffic engineering, 4. medical engineering, and 5. production engineering applications and on 6. general materials research and new fields. The descriptions of individual projects indicate project goals and work schedules, names of important sub-contractors, and total costs and the funds contributed by BMFT. Information added in an annex includes inter alia a list of publications, lectures, contracts, or patents resulting from project activities. (MM)

  18. Increasing Heavy Oil in the Wilmington Oil Field Through Advanced Reservoir Characterization and Thermal Production Technologies. Annual Report, March 30, 1995--March 31, 1996

    International Nuclear Information System (INIS)

    The objective of this project is to increase heavy oil reserves in a portion of the Wilmington Oil Field, near Long Beach, California, by implementing advanced reservoir characterization and thermal production technologies. Based on the knowledge and experience gained with this project, these technologies are intended to be extended to other sections of the Wilmington Oil Field, and, through technology transfer, will be available to increase heavy oil reserves in other slope and basin clastic (SBC) reservoirs

  19. Annual report 1992

    International Nuclear Information System (INIS)

    The book is a collection of short communications being a review of the scientific activity of the Institute of Nuclear Chemistry and Technology, Warsaw in 1992. The papers are gathered in several branches as follows: radiation chemistry and physics (17), radiochemistry, stable isotopes and nuclear analytical methods (20), radiobiology (7). The last biggest chapter on nuclear technologies and methods has been diluted into four smaller groups concerning: process engineering (5), material engineering, structural studies, diagnostics (17); radiation technologies (7) and nuclear control systems (6). The annual report contains also a general information about the Institute, the full list of scientific papers published, patents granted and their applications, conferences organized by INCT, Ph.D. and D.Sc. thesis as well as list of projects granted by Committee of Scientific Research

  20. Annual report 1993

    International Nuclear Information System (INIS)

    The book is a collection of short communications being a review of the scientific activity of Institute of Nuclear Chemistry and Technology, Warsaw in 1993. The papers are gathered in several branches as follows: radiation chemistry and physics (9); radiochemistry, stable isotopes, nuclear analytical methods, general chemistry (22); radiobiology (6). The last biggest chapter devoted to nuclear technologies and methods is divided into four smaller groups concerning: process engineering (2); material engineering, structural studies, diagnostics (14); radiation technologies (8) and nuclear control systems (4). The annual report of INCT 1993 contains also a general information about the staff and organizations of the Institute, the full list of scientific publications and patents, conferences organized by INCT, Ph.D. and Sc.D. thesis and a list of projects granted by Committee of Scientific Research and other organizations in Poland and elsewhere

  1. GKSS annual report 1989

    International Nuclear Information System (INIS)

    GKSS-Forschungszentrum Geesthacht GmbH, as a national research center, carries out development work on behalf of the Federal Government's research and technology policy in order to deepen scientific knowledge, conserve resources and environment, improve living and working conditions, and increase economic efficiency and competitiveness. The center carries out work on energy research and energy technology, basic technologies, marine research and techniques, health-environment-biotechnology. The annual report contains in summary selected research work, the report on R and D activities in reactor safety, materials, environment and climate, underwater and environmental techniques. The research institutes, cooperation with external partners, the organization, budget, personnel, publications, including patent applications, and lectures are described. (HK)

  2. GKSS annual report 1990

    International Nuclear Information System (INIS)

    The GKSS-Forschungszentrum at Geesthacht, as one of the larger research institutions in the Federal Republic of Germany, contributes through its R and D studies to the objectives of the Federal Government's research and technology policies. The program for 1990 was divided according to the following main research topics: Materials research; environmental research, climate research; environmental technology; under-water technology; reactor safety research. The first three topics are areas of study suitable for long-term work and for extension if possible. All studies on reactor safety research have been concluded in the last few years, except for one project. The annual report contains a summary of the R and D studies carried out in the reporting year, as well as a survey of the company's organization and situation. These sections are preceded by articles on selected research studies. (BBR)

  3. Annual report on reactor safety research projects sponsored by the Ministry for Research and Technology of the Federal Republic of Germany 1988

    International Nuclear Information System (INIS)

    The GRS (Society for Reactor Safety), Gesellschaft fuer Reaktorsicherheit mbH, by order of the BMFT, informs continuously of the status of such investigations by means of semi-annual and annual publication of progress reports within the series GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about objectives, the work performed, the results, the next steps of the work etc. The individual reports are prepared in a standard form by the contractors themselves as a documentation of their progress in work and published by the FB (Research Coordination Department) Forschungsbetreuung at the GRS, within the framework of general information of progress in the reactor safety research. The individual reports are classified according to the same classification system as applied in the nuclear index of the CEC (Commission of the European Communities) and the OECD (Organization for Economic Cooperation and Development). The reports are arranged in sequence of their project numbers. Besides the progress reports, lists of reports exchanged under international exchange agreements by the BMFT are published within this series. (orig./HP)

  4. Annual report on reactor safety research projects sponsored by the Ministry for Research and Technology of the Federal Republic of Germany 1987

    International Nuclear Information System (INIS)

    The GRS (Reactor Safety Association), Gesellschaft fuer Reaktorsicherheit mbH, by order of the BMFT, informs continuously of the status of such investigations by means of semi-annual and annual publication of progress reports within the series GRS-F-Fortschrittsberichte (GRS-F-Progress-Reports). Each progress report represents a compilation of individual reports about objectives, the work performed, the results, the next steps of the work etc. The individual reports are prepared in a standard form by the contractors themselves as a documentation of their progress in work and published by the FB (Research Coordination Department), Forschungsbetreuung at the GRS, within the framework of general information of progress in reactor safety research. The individual reports are classified according to the Research Program on the Safety of LWRs of the BMFT. Another table of contents uses the same classification system as applied in the Nuclear Safety Index of the CEC (Commission of the European Communities) and the OECD (Organization for Economic Cooperation and Development). The report are arranged in the sequence of their project numbers. (orig./HP)

  5. GKSS 1978 annual report

    International Nuclear Information System (INIS)

    In its annual reports, the GKSS gives a detailed survey of its R+D activities in the year under report as well as of its organisation and social situation. These sections are supplemented by some detailed reports on selected research activities. In the year under report, techniques for the irradiation of pressure vessel steels in research reactors, the determination of the critical heat flux on LWR fuel rods, a GKSS contribution to the production of manganese modules in the Pacific Ocean, the corrosion behaviour of structural steels under seawater conditions, and remote aerosol monitoring by means of laser technology are dealt with. (orig.)

  6. Renewable energy annual 1996

    International Nuclear Information System (INIS)

    This report presents summary data on renewable energy consumption, the status of each of the primary renewable technologies, a profile of each of the associated industries, an analysis of topical issues related to renewable energy, and information on renewable energy projects worldwide. It is the second in a series of annual reports on renewable energy. The renewable energy resources included in the report are biomass (wood and ethanol); municipal solid waste, including waste-to-energy and landfill gas; geothermal; wind; and solar energy, including solar thermal and photovoltaic. The report also includes various appendices and a glossary

  7. 1992 Annual report

    International Nuclear Information System (INIS)

    Annual report of the Institut de Physique Nucleaire at Orsay (France). The main themes are presented. Concerning experimental research: nuclear structure, ground states and low energy excited states, high excitation energy nuclear states, nuclear matter and nucleus-nucleus collision, intermediate energy nuclear physics, radiochemistry, inter-disciplinary research, scientific information and communication; concerning theoretical physics: particles and fields (formal aspects and hadronic physics), chaotic systems and semi-classical methods, few body problems, nucleus-nucleus scattering, nucleus spectroscopy and clusters, statistical physics and condensed matter; concerning general activities and technological research: accelerators, detectors, applications in cryogenics, data processing, Isolde and Orion equipment

  8. Renewable energy annual 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This report presents summary data on renewable energy consumption, the status of each of the primary renewable technologies, a profile of each of the associated industries, an analysis of topical issues related to renewable energy, and information on renewable energy projects worldwide. It is the second in a series of annual reports on renewable energy. The renewable energy resources included in the report are biomass (wood and ethanol); municipal solid waste, including waste-to-energy and landfill gas; geothermal; wind; and solar energy, including solar thermal and photovoltaic. The report also includes various appendices and a glossary.

  9. Gas-Cooled Reactor Programs. High-Temperature Gas-Cooled Reactor Base-Technology Program. Annual progress report for period ending December 31, 1977

    International Nuclear Information System (INIS)

    Progress in HTGR studies is reported in the following areas: fission product technology and coolant impurity effects, fueled graphite development, PCRV development, structural materials, characterization and standardization of graphite, and evaluation of the pebble-bed type HTR

  10. Gas-Cooled Reactor Programs. High-Temperature Gas-Cooled Reactor Base-Technology Program. Annual progress report for period ending December 31, 1977

    Energy Technology Data Exchange (ETDEWEB)

    Homan, F.J.; Kasten, P.R.

    1978-07-01

    Progress in HTGR studies is reported in the following areas: fission product technology and coolant impurity effects, fueled graphite development, PCRV development, structural materials, characterization and standardization of graphite, and evaluation of the pebble-bed type HTR.

  11. Attracting students and professionals into math, science, and technology education at the elementary and middle grades: Annual report, September 1, 1992--August 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Flick, L.B.

    1995-12-31

    This report describes the progress of a project to encourage students and professionals to participate in math, science, and technology education at the elementary and middle grades. The topics of the report include developing a model laboratory/classroom for teacher education, providing financial incentives for students with technical majors to complete the program, and emphasizing issues of equity and minority participation in mathematics, science and technology education through recruitment procedures and in course content.

  12. Fusion technology (FT)

    International Nuclear Information System (INIS)

    The annual report of tha fusion technology (FT) working group discusses the projects carried out by the participating institutes in the fields of 1) fuel injection and plasma heating, 2) magnetic field technology, and 3) systems investigations. (HK)

  13. 海水鱼类亲体必需脂肪酸营养的研究进展%Research progress of essential fatty acids nutrition in marine fish broodstock

    Institute of Scientific and Technical Information of China (English)

    彭士明; 李云莉; 施兆鸿; 高权新; 张晨捷; 王建钢

    2016-01-01

    Fatty acids,especially essential fatty acids,play an important role in the regulation of reproductive performance in marine fish.The importance of long-chain polyunsaturated fatty acids (LC-PUFA),especially 22:6n-3 (DHA),20:5n-3 (EPA)and 20:4n-6 (ARA),in broodstock nutrition has attracted attention in the last two decades.It has been well documented that dietary essential fatty acid is a nutritional factor that greatly affects spawning performance,egg and larval quality of fish.Lipids are utilized as energy sources throughout embryogenesis,and particularly in the later stages of development prior to hatching.EPA and DHA are the major fatty acids in the total lipid of eggs of most fish and these fatty acids markedly influence the reproductive parameters.DHA,especially abundant in retina and brain,has a particularly important role in maintaining the structure and function of the cell membranes of these tissues.In addition,as a major fatty acid in phosphatidylinositol and precursor of prostaglandin, ARA stimulates ovarian and testicular steroidogenesis and is assumed to be involved in embryonic development of the immune system,hatching and early larval performance.Reported studies on essential fatty acids in marine fish broodstock mainly cover four fields:(1 )Requirements.Fat provides energy and essential fatty acids for the growth of marine fishes and play critical roles in marine fish nutrition.n-3 LC-PUFA are essential fatty acids.It is typically recognized that marine fishes have a limited ability to convert shorter chain and less unsaturated fatty acids into n-3 LC-PUFA.Therefore,adequate amounts of n-3 LC-PUFA must be supplied through the diet to ensure normal growth and development.Studies on some marine fish species have shown that different fishes require different levels of n-3 LC-PUFA,and also extremely high or low levels of dietary n-3 LC-PUFA are not conducive to the normal growth and development.Hence,the provision of appropriate amounts of dietary n-3

  14. Research progress of essential fatty acids nutrition in marine fish broodstock%海水鱼类亲体必需脂肪酸营养的研究进展

    Institute of Scientific and Technical Information of China (English)

    彭士明; 李云莉; 施兆鸿; 高权新; 张晨捷; 王建钢

    2016-01-01

    Fatty acids,especially essential fatty acids,play an important role in the regulation of reproductive performance in marine fish.The importance of long-chain polyunsaturated fatty acids (LC-PUFA),especially 22:6n-3 (DHA),20:5n-3 (EPA)and 20:4n-6 (ARA),in broodstock nutrition has attracted attention in the last two decades.It has been well documented that dietary essential fatty acid is a nutritional factor that greatly affects spawning performance,egg and larval quality of fish.Lipids are utilized as energy sources throughout embryogenesis,and particularly in the later stages of development prior to hatching.EPA and DHA are the major fatty acids in the total lipid of eggs of most fish and these fatty acids markedly influence the reproductive parameters.DHA,especially abundant in retina and brain,has a particularly important role in maintaining the structure and function of the cell membranes of these tissues.In addition,as a major fatty acid in phosphatidylinositol and precursor of prostaglandin, ARA stimulates ovarian and testicular steroidogenesis and is assumed to be involved in embryonic development of the immune system,hatching and early larval performance.Reported studies on essential fatty acids in marine fish broodstock mainly cover four fields:(1 )Requirements.Fat provides energy and essential fatty acids for the growth of marine fishes and play critical roles in marine fish nutrition.n-3 LC-PUFA are essential fatty acids.It is typically recognized that marine fishes have a limited ability to convert shorter chain and less unsaturated fatty acids into n-3 LC-PUFA.Therefore,adequate amounts of n-3 LC-PUFA must be supplied through the diet to ensure normal growth and development.Studies on some marine fish species have shown that different fishes require different levels of n-3 LC-PUFA,and also extremely high or low levels of dietary n-3 LC-PUFA are not conducive to the normal growth and development.Hence,the provision of appropriate amounts of dietary n-3

  15. Annual report

    International Nuclear Information System (INIS)

    This is the thirty-ninth annual report of the Atomic Energy Control Board. The period covered by this report is the year ending March 31, 1986. The Atomic Energy Control Board (AECB) was established in 1946, by the Atomic Energy Control Act (AEC Act), (Revised Statues of Canada (R.S.C.) 1970 cA19). It is a departmental corporation (Schedule B) within the meaning and purpose of the Financial Administration Act. The AECB controls the development, application and use of atomic energy in Canada, and participates on behalf of Canada in international measures of control. The AECB is also repsonsible for the administration of the Nuclear Liability Act, (R.S.C. 1970 c29 1st Supp) as amended, including the designation of nuclear installations and the prescription of basic insurance to be carried by the operators of such nuclear installations. The AECB reports to Parliament through a designated Minister, currently the Minister of Energy, Mines and Resources

  16. Fusion technology. Annual report of the. Association Cea/EURATOM; Technologie de fusion.Rapport annuel de l`association CEA/Euratom

    Energy Technology Data Exchange (ETDEWEB)

    Magaud, P.; Le Vagueres, F.

    1996-12-31

    In 1996, the French EURATOM-CEA Association made significant contributions to the European technology programme. This work is compiled in this report as follows: the ITER CEA activities and related developments are described in the first section; blankets and material developments for DEMO, long term safety studies are summarised in the second part; the Underlying Technology activities are compiled in the third part of this report. In each section, the tasks are sorted out to respect the European presentation. For an easy reading, appendix 4 gives the list of tasks in alphabetical order with a page reference list. The CEA is in charge of the French Technology programme. Three specific organizational directions of the CEA, located on four sites (see appendix 5) are involves in this programme: Advanced Technologies Direction (DTA), for Material task; Nuclear Reactors Direction (DRN), for Blanket design, Neutronic problems, Safety tasks; Physical Sciences Direction (DSM) uses the competence of the Tore Supra team in the Magnet design and plasma Facing Component field. The CEA programme is completed by collaborations with Technicatome, COMEX-Nucleaire and Ecole Polytechnique. The breakdown of the programme by Directions is presented in figure 1. The allocation of tasks is given in appendix 2 and in appendix 3, the related publications. (author).

  17. Annual Site Environmental Report, Department of Energy Operations at the Energy Technology Engineering Center – Area IV, Santa Susana Field Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Frazee, Brad [North Wind, Inc., Idaho Falls, ID (United States); Hay, Scott [North Wind, Inc., Idaho Falls, ID (United States); Wondolleck, John [North Wind, Inc., Idaho Falls, ID (United States); Sorrels, Earl [North Wind, Inc., Idaho Falls, ID (United States); Rutherford, Phil [North Wind, Inc., Idaho Falls, ID (United States); Dassler, David [North Wind, Inc., Idaho Falls, ID (United States); Jones, John [North Wind, Inc., Idaho Falls, ID (United States)

    2015-05-01

    This Annual Site Environmental Report (ASER) for 2014 describes the environmental conditions related to work performed for the DOE at Area IV of the Santa Susana Field Laboratory (SSFL). The ETEC, a government-owned, company-operated test facility, was located in Area IV. The operations in Area IV included development, fabrication, operation and disassembly of nuclear reactors, reactor fuel, and other radioactive materials. Other activities in the area involved the operation of large-scale liquid metal facilities that were used for testing non-nuclear liquid metal fast breeder reactor components. All nuclear work was terminated in 1988, and all subsequent radiological work has been directed toward environmental restoration and decontamination and decommissioning (D&D) of the former nuclear facilities and their associated sites. Liquid metal research and development ended in 2002. Since May 2007, the D&D operations in Area IV have been suspended by the DOE, but the environmental monitoring and characterization programs have continued. Results of the radiological monitoring program continue to indicate that there are no significant releases of radioactive material from Area IV of SSFL. All potential exposure pathways are sampled and/or monitored, including air, soil, surface water, groundwater, direct radiation, transfer of property (land, structures, waste), and recycling.

  18. Task 3.14 - demonstration of technologies for remote power generation in Alaska. Semi-annual report, July 1, 1996--December 31, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Jones, M.L.

    1998-12-31

    This paper very briefly summarizes progress in the demonstration of a small (up to 6 MWe), environmentally acceptable electric generating system fueled by indigenous fuels and waste materials to serve power distribution systems typical of Alaskan Native communities. Two detailed appendices supplement the report. The project is focused on two primary technologies: (1) atmospheric fluidized bed combustion (AFBC), and (2) coalbed methane and coal-fired diesel technologies. Two sites have been selected as possible locations for an AFBC demonstration, and bid proposals are under review. The transfer of a coal-fired diesel clean coal demonstration project from Maryland to Fairbanks, Alaska was approved, and the environmental assessment has been initiated. Federal support for a fuel cell using coalbed methane is also being pursued. The appendices included in the report provide: (1) the status of the conceptual design study for a 600-kWe coal-fired cogeneration plant in McGrath, Alaska; and (2) a global market assessment of coalbed methane, fluidized-bed combustion, and coal-fired diesel technologies in remote applications.

  19. Innovative fossil fuel fired vitrification technology for soil remediation. Volume 1, Phase 1: Annual report, September 28, 1992--August 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-08-01

    Vortex has successfully completed Phase 1 of the ``Innovative Fossil Fuel Fired Vitrification Technology for Soil Remediation`` program with the Department of Energy (DOE) Morgantown Energy Technology Center (METC). The Combustion and Melting System (CMS) has processed 7000 pounds of material representative of contaminated soil that is found at DOE sites. The soil was spiked with Resource Conversation and Recovery Act (RCRA) metals surrogates, an organic contaminant, and a surrogate radionuclide. The samples taken during the tests confirmed that virtually all of the radionuclide was retained in the glass and that it did not leach to the environment. The organic contaminant, anthracene, was destroyed during the test with a Destruction and Removal Efficiency (DRE) of at least 99.99%. RCRA metal surrogates, that were in the vitrified product, were retained and will not leach to the environment--as confirmed by the TCLP testing. Semi-volatile RCRA metal surrogates were captured by the Air Pollution Control (APC) system, and data on the amount of metal oxide particulate and the chemical composition of the particulate were established for use in the Phase 2 APC system design. This topical report will present a summary of the activities conducted during Phase 1 of the ``Innovative Fossil Fuel Fired Vitrification Technology for Soil Remediation`` program. The report includes the detail technical data generated during the experimental program and the design and cost data for the preliminary Phase 2 plant.

  20. Semi-Annual Technical Progress Report of the Radioisotope Power System Materials Production and Technology Program Tasks for September 2000 through March 2001

    Energy Technology Data Exchange (ETDEWEB)

    Moore, J.P.

    2001-05-22

    The Office of Space and Defense Power Systems of the Department of Energy (DOE) provides Radioisotope Power Systems (RPS) for applications where conventional power systems are not feasible. For example, radioisotope thermoelectric generators were supplied by the DOE to the National Aeronautics and Space Administration for deep space missions including the Cassini Mission launched in October of 1997 to study the planet Saturn. The Oak Ridge National Laboratory (ORNL) has been involved in developing materials and technology and producing components for the DOE for more than three decades. For the Cassini Mission, for example, ORNL was involved in the production of carbon-bonded carbon fiber (CBCF) insulator sets, iridium alloy blanks and foil, and clad vent sets (CVS) and weld shields (WS). This report has been divided into three sections to reflect program guidance from the Office of Space and Defense Power Systems for fiscal year (FY) 2001. The first section deals primarily with maintenance of the capability to produce flight quality (FQ) CBCF insulator sets, iridium alloy blanks and foil, CVS, and WS. In all three cases, production maintenance is assured by the manufacture of limited quantities of FQ components. The second section deals with several technology activities to improve the manufacturing processes, characterize materials. or to develop technologies for new radioisotope power systems. The last section is dedicated to studies related to the production of {sup 238}Pu.

  1. Annual Technical Progress Report of Radioisotope Power System Materials Production and Technology Program Tasks for October 1, 2002 Through September 30, 2003

    Energy Technology Data Exchange (ETDEWEB)

    King, J.F.

    2004-05-18

    The Office of Space and Defense Power Systems of the Department of Energy (DOE) provides Radioisotope Power Systems (RPS) for applications where conventional power systems are not feasible. For example, radioisotope thermoelectric generators were supplied by the DOE to the National Aeronautics and Space Administration for deep space missions including the Cassini Mission launched in October of 1997 to study the planet Saturn. The Oak Ridge National Laboratory (ORNL) has been involved in developing materials and technology and producing components for the DOE for more than three decades. For the Cassini Mission, for example, ORNL was involved in the production of carbon-bonded carbon fiber (CBCF) insulator sets, iridium alloy blanks and foil, and clad vent sets (CVS). This report has been divided into three sections to reflect program guidance from the Office of Space and Defense Power Systems for fiscal year (FY) 2003. The first section deals primarily with maintenance of the capability to produce flight quality (FQ) CBCF insulator sets, iridium alloy blanks and foil, and CVS. In all three cases, production maintenance is assured by the manufacture of limited quantities of FQ components. The second section deals with several technology activities to improve the manufacturing processes, characterize materials, or to develop technologies for new radioisotope power systems. The last section is dedicated to studies related to the production of {sup 238}Pu.

  2. 2015: 24th Annual John K. Friesen Conference "Harnessing Technology for Aging-in-Place" May 14-15, 2015: SESSION 5 - Panel 3 – Technologies for Managing Your Home and Making it/you Safer

    OpenAIRE

    Payandeh, Shahram; Kearns, William; Mitchell, Ian; O’Hearn, Emily

    2015-01-01

    Panel 3 – Technologies for Managing Your Home and Making it/you Safer Shahram Payandeh, Experimental Robotics & Imaging Laboratory, School of Enginerring Science, SFU - “Smart Living Environments and Assistive Robotics” William Kearns, Department of Rehabilitation and Mental Health Counselling, University of South Florida - “Extending Smart Home Technology for Persons with Cognitive Impairment” Ian Mitchell, Department of Computer Science, UBC - “The People and Planet Friendly H...

  3. 饲料营养对亲鱼生殖性能的影响研究进展%Effects of Broodstock Nutrition on Reproductive Performance of Fish:A Review

    Institute of Scientific and Technical Information of China (English)

    谭青松; 吴凡; 杜浩; 梁旭方; 危起伟

    2016-01-01

    Broodstock nutrition is an important regulator for reproduction performance of fish,affecting not only the gonad maturation,gametogenesis,fecundity,fertilization of the broodstocks,but also the hatching of fertilized eggs, embryonic development and the survival of larval fish.Optimal nutrient would benefit the reproduction performance of fish,whereas deficient or excessive nutrient supply would depress the reproduction.In this paper the sources of dietary protein,lipid,carbohydrate,vitamins and minerals and their effects on the reproductive performance of fish in the past three decades were reviewed.Some suggestions were given for the key nutrients in the diets of brood-stocks.Combining with the research results on the terrestrial animal,the mechanism of how the energy,lipid and essential fatty acids regulate the reproduction performance of fish were discussed.%营养对鱼类生殖具有重要的调节作用。亲鱼阶段的营养不仅影响亲鱼的性成熟、配子产生、繁殖力、受精率、受精卵的孵化率和胚胎发育,而且还影响仔稚鱼的质量和存活率;适当的营养可促进鱼类的繁殖性能,而营养缺乏或者过量将降低其繁殖性能。本文总结了饲料中的蛋白质、脂肪、糖、维生素和钙磷等矿物元素的含量和来源等因素对亲鱼生殖活动各个环节的影响,对饲料中一些关键营养素的供应提出了建议,并结合陆生动物的研究结果,对能量、脂肪及必需脂肪酸等调节鱼类繁殖性能的作用机制进行概括和推断。

  4. 1981 inertial fusion research annual technical report

    International Nuclear Information System (INIS)

    This annual report consists of the following two topics: (1) target fabrication technology, and (2) fusion experiments. The first section is reported by the following seven areas: (1) characterization, (2) fuel shell technology, (3) polymer technology, (4) lithium foil development, (5) precision etch technology, (6) analytical instrumentation, and (7) target fabrication. The second area is reported by the following topics: (1) experiments, (2) plasma theory, (3) code development and simulation, and (4) lasers and optics

  5. Continuous roll-to-roll a-Si photovoltaic manufacturing technology. Annual subcontractor report, 1 April 1992--31 March 1993

    Energy Technology Data Exchange (ETDEWEB)

    Izu, M. [Energy Conversion Devices, Inc., Troy, MI (United States)

    1993-12-01

    This report describes work done under a 3-year program to advance ECD`s roll-to-roll, triple-junction photovoltaic manufacturing technologies, to reduce the module production costs, to increase the stabilized module performance, and to expand commercial capacity utilizing ECD technology. The specific 3-year goal is to develop advanced large-scale manufacturing technology incorporating ECD`s earlier research advances with the capability of producing modules with stable 11% efficiency at a cost of approximately $1.00 per peak watt. Accomplishments during Phase 1 included: (1) ECD successfully incorporated a high-performance Ag/metal-oxide back-reflector system into its continuous roll-to-roll commercial production operation. (2) High-quality a-Si-Ge narrow-band-gap solar cells were incorporated into the manufacturing. (3) ECD demonstrated the continuous roll-to-roll production of high-efficiency, triple-junction, two-band-gap solar cells consistently and uniformly throughout a 762-m (2500-ft) run with high yield. (4) ECD achieved 11.1% initial sub-cell efficiency of triple-junction, two-band-gap a-Si alloy solar cells in the production line. (5) The world`s first 0.37-m{sup 2} (4-ft{sup 2}) PV modules were produced utilizing triple-junction spectrum-splitting solar cells manufactured in the production line. (6) As a result of process optimization to reduce the layer thickness and to improve the gas utilization, ECD achieved a 77% material cost reduction for germane and 58% reduction for disilane. Additionally, ECD developed a new low-cost module that saves approximately 30% in assembly material costs.

  6. Fusion technology annual report of the association EURATOM/CEA 1998; Technologie de la fusion Rapport annuel 1998 Association EURATOM/CEA 1998

    Energy Technology Data Exchange (ETDEWEB)

    Magaud, P.; Le vagueres, F

    1998-07-01

    In this book are found technical and scientific papers on the main works carried out in the frame of the european program of fusion technology, during 1998. The presented activities are: plasma facing components, vacuum vessel and shield, magnets, remote handling, safety (short and long term), european blanket project (long term) with water cooled lithium lead and helium cooled pebble bed blanket, materials for fusion power plant, socio-economic research on fusion, plasma facing components, fuel cycle, inertial confinement. (A.L.B.)

  7. Annual Technical Progress Report of Radioisotope Power Systems Materials Production and Technology Program Tasks for October 1, 2007 Through September 30,2008

    Energy Technology Data Exchange (ETDEWEB)

    King, James F [ORNL

    2009-04-01

    The Office of Radioisotope Power Systems (RPS) of the Department of Energy (DOE) provides RPS for applications where conventional power systems are not feasible. For example, radioisotope thermoelectric generators were supplied by the DOE to the National Aeronautics and Space Administration (NASA) for deep space missions including the Cassini Mission launched in October of 1997 to study the planet Saturn. For the Cassini Mission, ORNL produced carbon-bonded carbon fiber (CBCF) insulator sets, iridium alloy blanks and foil, and clad vent sets (CVS) used in the generators. The Oak Ridge National Laboratory (ORNL) has been involved in developing materials and technology and producing components for the DOE for more than three decades. This report reflects program guidance from the Office of RPS for fiscal year (FY) 2008. Production activities for prime quality (prime) CBCF insulator sets, iridium alloy blanks and foil, and CVS are summarized in this report. Technology activities are also reported that were conducted to improve the manufacturing processes, characterize materials, or to develop information for new RPS.

  8. ANNUAL TECHNICAL PROGRESS REPORT OF RADIOISOTOPE POWER SYSTEM MATERIALS PRODUCTION AND TECHNOLOGY PROGRAM TASKS FOR OCTOBER 1, 2004, THROUGH SEPTEMBER 30, 2005

    Energy Technology Data Exchange (ETDEWEB)

    None

    2005-09-30

    The Office of Space and Defense Power Systems of the Department of Energy (DOE) provides Radioisotope Power Systems (RPS) for applications where conventional power systems are not feasible. For example, radioisotope thermoelectric generators were supplied by the DOE to the National Aeronautics and Space Administration for deep space missions including the Cassini Mission launched in October of 1997 to study the planet Saturn. For the Cassini Mission, ORNL produced carbon-bonded carbon fiber (CBCF) insulator sets, iridium alloy blanks and foil, and clad vent sets (CVS) used in the generators. The Oak Ridge National Laboratory (ORNL) has been involved in developing materials and technology and producing components for the DOE for more than three decades. This report reflects program guidance from the Office of Space and Defense Power Systems for fiscal year (FY) 2005. Production activities for prime quality (prime) CBCF insulator sets, iridium alloy blanks and foil, and CVS are summarized in this report. Technology activities are also reported that were conducted to improve the manufacturing processes, characterize materials, or to develop information for new radioisotope power systems.

  9. Annual Technical Progress Report of Radioisotope Power System Materials Production and Technology Tasks for October 1, 2004 through September 30, 2005

    Energy Technology Data Exchange (ETDEWEB)

    None listed

    2006-08-03

    The Office of Space and Defense Power Systems of the Department of Energy (DOE) provides Radioisotope Power Systems (RPS) for applications where conventional power systems are not feasible. For example, radioisotope thermoelectric generators were supplied by the DOE to the National Aeronautics and Space Administration for deep space missions including the Cassini Mission launched in October of 1997 to study the planet Saturn. For the Cassini Mission, ORNL produced carbon-bonded carbon fiber (CBCF) insulator sets, iridium alloy blanks and foil, and clad vent sets (CVS) used in the generators. The Oak Ridge National Laboratory (ORNL) has been involved in developing materials and technology and producing components for the DOE for more than three decades. This report reflects program guidance from the Office of Space and Defense Power Systems for fiscal year (FY) 2005. Production activities for prime quality (prime) CBCF insulator sets, iridium alloy blanks and foil, and CVS are summarized in this report. Technology activities are also reported that were conducted to improve the manufacturing processes, characterize materials, or to develop information for new radioisotope power systems.

  10. Annual Technical Progress Report of Radioisotope Power System Materials Production and Technology Program Tasks for October 1, 2004 Through September 30, 2005

    Energy Technology Data Exchange (ETDEWEB)

    King, James F [ORNL

    2006-06-01

    The Office of Space and Defense Power Systems of the Department of Energy (DOE) provides Radioisotope Power Systems (RPS) for applications where conventional power systems are not feasible. For example, radioisotope thermoelectric generators were supplied by the DOE to the National Aeronautics and Space Administration for deep space missions including the Cassini Mission launched in October of 1997 to study the planet Saturn. For the Cassini Mission, ORNL produced carbon-bonded carbon fiber (CBCF) insulator sets, iridium alloy blanks and foil, and clad vent sets (CVS) used in the generators. The Oak Ridge National Laboratory (ORNL) has been involved in developing materials and technology and producing components for the DOE for more than three decades. This report reflects program guidance from the Office of Space and Defense Power Systems for fiscal year (FY) 2005. Production activities for prime quality (prime) CBCF insulator sets, iridium alloy blanks and foil, and CVS are summarized in this report. Technology activities are also reported that were conducted to improve the manufacturing processes, characterize materials, or to develop information for new radioisotope power systems.

  11. ANNUAL TECHNICAL PROGRESS REPORT OF RADIOISOTOPE POWER SYSTEMS MATERIALS PRODUCTION AND TECHNOLOGY PROGRAM TASKS FOR OCTOBER 1, 2010 THROUGH SEPTEMBER 30, 2011

    Energy Technology Data Exchange (ETDEWEB)

    King, James F [ORNL

    2012-05-01

    The Office of Space and Defense Power Systems of the Department of Energy (DOE) provides Radioisotope Power Systems (RPS) for applications where conventional power systems are not feasible. For example, radioisotope thermoelectric generators were supplied by the DOE to the National Aeronautics and Space Administration (NASA) for deep space missions including the Cassini Mission launched in October of 1997 to study the planet Saturn. For the Cassini Mission, the Oak Ridge National Laboratory (ORNL) produced carbon-bonded carbon fiber (CBCF) insulator sets, iridium alloy blanks and foil, and clad vent sets (CVS) used in the generators. These components were also produced for the Pluto New Horizons and Mars Science Lab missions launched in January 2006 and November 2011respectively. The ORNL has been involved in developing materials and technology and producing components for the DOE for nearly four decades. This report reflects program guidance from the Office of RPS for fiscal year (FY) 2011. Production activities for prime quality (prime) CBCF insulator sets, iridium alloy blanks and foil, and CVS are summarized in this report. Technology activities are also reported that were conducted to improve the manufacturing processes, characterize materials, or to develop information for new RPS. Work has also been initiated to establish fabrication capabilities for the Light Weight Radioisotope Heater Units.

  12. The development of coal-based technologies for Department of Defense facilities. Semi-annual report, March 28, 1996--September 27, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Miller, B.G.; Pisupati, S.V.; Scarone, A.W. [and others

    1996-12-13

    The U.S. Department of Defense (DOD), through an Interagency Agreement with the U.S. Department of Energy (DOE), has initiated a three-phase program with the Consortium for Coal-Water Fuel Technology, with the aim of decreasing DOD`s reliance on imported oil by increasing its use of coal. The program is being conducted as a cooperative agreement between the Consortium and DOE. Activities this reporting period are summarized by phase. Phase I was completed on November 1, 1995. Work on Phase II focused on emissions reductions, coal beneficiation/preparation studies, and economic analyses of coal use. Emissions reductions investigations included continuing bench-scale tests to identify an NO{sub x} reduction catalyst which is appropriate for industrial boiler applications. In addition, installation of a ceramic filtering device on the demonstration boiler started. Also, a sodium bicarbonate duct injection system was procured for installation on the demonstration boiler. Work related to coal preparation and utilization, and the economic analysis was primarily focused on preparing the final report. Work in Phase III focused on coal preparation studies and economic analyses of coal use. Coal preparation studies were focused on continuing activities on particle size control, physical separations,surface-based separation processes, and dry processing. The economic study focused on community sensitivity to coal usage, regional/national economic impacts of new coal utilization technologies, and constructing a national energy portfolio.

  13. Annual Technical Progress Report of the Radioisotope Power Systems Materials Production and Technology Program Tasks for October 1, 2008 through September 30, 2009

    Energy Technology Data Exchange (ETDEWEB)

    King, James F [ORNL

    2010-05-01

    The Office of Space and Defense Power Systems of the U. S. Department of Energy (DOE) provides Radioisotope Power Systems (RPS) for applications where conventional power systems are not feasible. For example, radioisotope thermoelectric generators (RTG) were supplied by the DOE to the National Aeronautics and Space Administration (NASA) for deep space missions including the Cassini Mission launched in October of 1997 to study the planet Saturn. For the Cassini Mission, the Oak Ridge National Laboratory (ORNL) produced carbon-bonded carbon fiber (CBCF) insulator sets, iridium alloy blanks and foil, and clad vent sets (CVS) used in the generators. ORNL has been involved in developing materials and technology and producing components for the DOE for more than three decades. This report reflects program guidance from the Office of Space and Defense Power Systems for fiscal year (FY) 2009. Production activities for prime quality (prime) CBCF insulator sets, iridium alloy blanks and foil, and CVS are summarized in this report. Technology activities are also reported that were conducted to improve the manufacturing processes, characterize materials, or to develop information for new RPS.

  14. Annual Technical Progress Report of Radioisotope Power Systems Materials Production and Technology Program Tasks for October 1, 2006 Through September 30, 2007

    Energy Technology Data Exchange (ETDEWEB)

    King, James F [ORNL

    2008-04-01

    The Office of Radioisotope Power Systems of the Department of Energy (DOE) provides Radioisotope Power Systems (RPS) for applications where conventional power systems are not feasible. For example, radioisotope thermoelectric generators were supplied by the DOE to the National Aeronautics and Space Administration for deep space missions including the Cassini Mission launched in October of 1997 to study the planet Saturn. For the Cassini Mission, ORNL produced carbon-bonded carbon fiber (CBCF) insulator sets, iridium alloy blanks and foil, and clad vent sets (CVS) used in the generators. The Oak Ridge National Laboratory (ORNL) has been involved in developing materials and technology and producing components for the DOE for more than three decades. This report reflects program guidance from the Office of Radioisotope Power Systems for fiscal year (FY) 2007. Production activities for prime quality (prime) CBCF insulator sets, iridium alloy blanks and foil, and CVS are summarized in this report. Technology activities are also reported that were conducted to improve the manufacturing processes, characterize materials, or to develop information for new radioisotope power systems.

  15. ANNUAL TECHNICAL PROGRESS REPORT OF RADIOISOTOPE POWER SYSTEM MATERIALS PRODUCTION AND TECHNOLOGY PROGRAM TASKS FOR OCTOBER 1, 2005 THROUGH SEPTEMBER 30, 2006

    Energy Technology Data Exchange (ETDEWEB)

    King, James F [ORNL

    2007-04-01

    The Office of Space and Defense Power Systems of the Department of Energy (DOE) provides Radioisotope Power Systems (RPS) for applications where conventional power systems are not feasible. For example, radioisotope thermoelectric generators were supplied by the DOE to the National Aeronautics and Space Administration for deep space missions including the Cassini Mission launched in October of 1997 to study the planet Saturn. For the Cassini Mission, ORNL produced carbon-bonded carbon fiber (CBCF) insulator sets, iridium alloy blanks and foil, and clad vent sets (CVS) used in the generators. The Oak Ridge National Laboratory (ORNL) has been involved in developing materials and technology and producing components for the DOE for more than three decades. This report reflects program guidance from the Office of Space and Defense Power Systems for fiscal year (FY) 2006. Production activities for prime quality (prime) CBCF insulator sets, iridium alloy blanks and foil, and CVS are summarized in this report. Technology activities are also reported that were conducted to improve the manufacturing processes, characterize materials, or to develop information for new radioisotope power systems.

  16. Annual Technical Progress Report of Radioisotope Power System Materials Production and Technology Programs Tasks for October 1, 2005, through September 30, 2006

    Energy Technology Data Exchange (ETDEWEB)

    None

    2006-09-30

    The Office of Space and Defense Power Systems of the Department of Energy (DOE) provides Radioisotope Power Systems (RPS) for applications where conventional power systems are not feasible. For example, radioisotope thermoelectric generators were supplied by the DOE to the National Aeronautics and Space Administration for deep space missions including the Cassini Mission launched in October of 1997 to study the planet Saturn. For the Cassini Mission, ORNL produced carbon-bonded carbon fiber (CBCF) insulator sets, iridium alloy blanks and foil, and clad vent sets (CVS) used in the generators. The Oak Ridge National Laboratory (ORNL) has been involved in developing materials and technology and producing components for the DOE for more than three decades. This report reflects program guidance from the Office of Space and Defense Power Systems for fiscal year (FY) 2006. Production activities for prime quality (prime) CBCF insulator sets, iridium alloy blanks and foil, and CVS are summarized in this report. Technology activities are also reported that were conducted to improve the manufacturing processes, characterize materials, or to develop information for new radioisotope power systems.

  17. Annual Technical Progress Report of Radioisotope Power System Materials Production and Technology Tasks for October 1, 2003 through September 30, 2004

    Energy Technology Data Exchange (ETDEWEB)

    None listed

    2005-06-01

    The Office of Space and Defense Power Systems of the Department of Energy (DOE) provides Radioisotope Power Systems (RPS) for applications where conventional power systems are not feasible. For example, radioisotope thermoelectric generators were supplied by the DOE to the National Aeronautics and Space Administration for deep space missions including the Cassini Mission launched in October of 1997 to study the planet Saturn. For the Cassini Mission, ORNL produced carbon-bonded carbon fiber (CBCF) insulator sets, iridium alloy blanks and foil, and clad vent sets (CVS) used in the generators. The Oak Ridge National Laboratory (ORNL) has been involved in developing materials and technology and producing components for the DOE for more than three decades. This report reflects program guidance from the Office of Space and Defense Power Systems for fiscal year (FY) 2004. Production and production maintenance activities for flight quality (FQ) CBCF insulator sets, iridium alloy blanks and foil, and CVS are summarized in this report. In all three cases, production maintenance is assured by the manufacture of limited quantities of FQ components. Technology activities are also reported that were conducted to improve the manufacturing processes, characterize materials, or to develop information for new radioisotope power systems.

  18. UNIVERSITY RESEARCH PROGRAMS IN ROBOTICS, TECHNOLOGIES FOR MICROELECTROMECHANICAL SYSTEMS IN DIRECTED STOCKPILE WORK RADIATION AND ENGINEERING CAMPAIGNS - 2005-06 FINAL ANNUAL REPORT

    Energy Technology Data Exchange (ETDEWEB)

    James S. Tulenko; Dean Schoenfeld; David Hintenlang; Carl Crane; Shannon Ridgeway; Jose Santiago; Charles Scheer

    2006-11-30

    The research performed by the University of Florida (UF) is directed to the development of technologies that can be utilized at a micro-scale in varied environments. Work is focused on micro-scale energy systems, visualization, and mechanical devices. This work will impact the NNSA need related to micro-assembly operations. The URPR activities are executed in a University environment, yet many applications of the resulting technologies may be classified or highly restrictive in nature. The NNSA robotics technologists apply an NNSA needs focus to the URPR research, and actively work to transition relevant research into the deployment projects in which they are involved. This provides a “Research to Development to Application” structure within which innovative research has maximum opportunity for impact without requiring URPR researchers to be involved in specific NNSA projects. URPR researchers need to be aware of the NNSA applications in order to ensure the research being conducted has relevance, the URPR shall rely upon the NNSA sites for direction.

  19. SET Careers Program: An interactive science, engineering, and technology career education exhibit. Annual progress report, September 1, 1992--October 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Cole, P.R.

    1993-03-31

    The New York Hall of Science, in response to the national crisis in education and employment in science and engineering, is developing and pilot testing a unique, interactive, video-based, hypermedia series on energy-related and other science and engineering careers for middle and junior high school students. Working in collaboration with the Consortium for Mathematics and its Applications (COMAP) and the Educational Film Center (EFC), this pilot-demonstration phase will last 14 months, during which time the basic design, production, and testing of eight science and engineering career modules (video and software) will be completed and installed as an interactive educational exhibit at the New York Hall of Science. This career education package will then be distributed to other science technology centers nationwide.

  20. SciDAC's Earth System Grid Center for Enabling Technologies Semi-Annual Progress Report for the Period October 1, 2009 through March 31, 2010

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Dean N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Foster, I. T. [Argonne National Lab. (ANL), Argonne, IL (United States); Middleton, D. E. [National Center for Atmospheric Research (NCAR), Boulder, CO (United States); Ananthakrishnan, R. [Argonne National Lab. (ANL), Argonne, IL (United States); Siebenlist, F. [Argonne National Lab. (ANL), Argonne, IL (United States); Shoshani, A. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Sim, A. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Bell, G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Drach, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Ahrens, J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Jones, P. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Brown, D. [National Center for Atmospheric Research (NCAR), Boulder, CO (United States); Chastang, J. [National Center for Atmospheric Research (NCAR), Boulder, CO (United States); Cinquini, L. [National Center for Atmospheric Research (NCAR), Boulder, CO (United States); Fox, P. [National Center for Atmospheric Research (NCAR), Boulder, CO (United States); Harper, D. [National Center for Atmospheric Research (NCAR), Boulder, CO (United States); Hook, N. [National Center for Atmospheric Research (NCAR), Boulder, CO (United States); Nienhouse, E. [National Center for Atmospheric Research (NCAR), Boulder, CO (United States); Strand, G. [National Center for Atmospheric Research (NCAR), Boulder, CO (United States); West, P. [National Center for Atmospheric Research (NCAR), Boulder, CO (United States); Wilcox, H. [National Center for Atmospheric Research (NCAR), Boulder, CO (United States); Wilhelmi, N. [National Center for Atmospheric Research (NCAR), Boulder, CO (United States); Zednik, S. [National Center for Atmospheric Research (NCAR), Boulder, CO (United States); Hankin, S. [National Oceanic and Atmospheric Administration (NOAA), Washington, DC (United States); Schweitzer, R. [National Oceanic and Atmospheric Administration (NOAA), Washington, DC (United States); Bernholdt, D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Chen, M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Miller, R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Shipman, G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Wang, F. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Bharathi, S. [Univ. of Southern California, Marina Del Rey, CA (United States). Information Sciences Institute; Chervenak, A. [Univ. of Southern California, Marina Del Rey, CA (United States). Information Sciences Institute; Schuler, R. [Univ. of Southern California, Marina Del Rey, CA (United States). Information Sciences Institute; Su, M. [Univ. of Southern California, Marina Del Rey, CA (United States). Information Sciences Institute

    2010-04-21

    This report summarizes work carried out by the ESG-CET during the period October 1, 2009 through March 31, 2009. It includes discussion of highlights, overall progress, period goals, collaborations, papers, and presentations. To learn more about our project, and to find previous reports, please visit the Earth System Grid Center for Enabling Technologies (ESG-CET) website. This report will be forwarded to the DOE SciDAC program management, the Office of Biological and Environmental Research (OBER) program management, national and international collaborators and stakeholders (e.g., the Community Climate System Model (CCSM), the Intergovernmental Panel on Climate Change (IPCC) 5th Assessment Report (AR5), the Climate Science Computational End Station (CCES), the SciDAC II: A Scalable and Extensible Earth System Model for Climate Change Science, the North American Regional Climate Change Assessment Program (NARCCAP), and other wide-ranging climate model evaluation activities).