Characterisation of Late Bronze Age large size shield nails by EDXRF, micro-EDXRF and X-ray digital radiography

International Nuclear Information System (INIS)

Figueiredo, E.; Araujo, M.F.; Silva, R.J.C.; Senna-Martinez, J.C.; Ines Vaz, J.L.

2011-01-01

In the present study six exceptional large size metallic nails, a dagger and a sickle from the Late Bronze Age archaeological site of Figueiredo das Donas (Central Portugal) have been analysed by EDXRF, micro-EDXRF and X-ray digital radiography for the study of material composition and technology of fabrication. The combination of these analytical and examination techniques showed that all artefacts are made of bronze with As, Sb and Pb impurities, and that the nails were most likely manufactured using the casting-on technique. These results reinforce the use of binary bronze by Late Bronze Age in the region, and the incorporation of new fabrication technologies that resulted from ancient spheres of interaction. - Highlights: → EDXRF, micro-EDXRF and X-ray digital radiography in cultural heritage studies. → Archaeometallurgical study of a Late Bronze Age artefact collection from Portugal. → Practise of a specific and traditional bronze metallurgy. → Appearance of technological innovations as the casting-on technique.

Bioarchaeology of adaptation to a marginal environment in bronze age Western China.

Science.gov (United States)

Berger, Elizabeth; Wang, Hui

2017-07-08

This study examines human adaptation to the 4000 BP climate change event, which is said to have increased the marginality of Inner Asian environments. We propose to define "marginal" environments not in relation to a specific economic activity (e.g., agriculture), but in relation to whether humans living there are physiologically stressed. Three sites in the Hexi Corridor of Gansu were studied, one from the early and two from the late Bronze Age (N = 125). The study includes three indicators of physiological stress: linear enamel hypoplasias (LEH); tibial periosteal lesions; and fertility. The early and late Bronze Age groups were compared to examine whether human physiological stress increased. The percent of individuals with LEH declined dramatically, indicating fewer growth disruptions. Tibial periosteal reactions also changed, from mostly active to mostly healing at the time of death, indicating that frailty declined. Fertility, which is sensitive to changes in population health and resource availability, did not change significantly. Counter to the dominant narrative of environmental deterioration and subsistence system collapse, the Bronze Age residents of the Hexi Corridor show no skeletal evidence that they suffered from resource shortages or struggled to adapt in the fluctuating climate that pertained after the 4000 BP climate event. In fact, this study found that people suffered from less frailty and fewer growth disruptions after the unstable climate had persisted for some time. Therefore, in human biological terms, the Hexi Corridor did not become more marginal for human habitation during the Bronze Age. © 2017 Wiley Periodicals, Inc.

Casting Simulation of an Austrian Bronze Age Sword Hilt

Science.gov (United States)

Pola, Annalisa; Mödlinger, Marianne; Piccardo, Paolo; Montesano, Lorenzo

2015-07-01

Bronze Age swords with a metal hilt can be considered the peak of Bronze Age casting technologies. To reconstruct the casting techniques used more than 3000 years ago, a metal hilted sword of the Schalenknauf type from Lower Austria was studied with the aid of macroscopic analyses and simulation of mold filling and casting solidification. A three-dimensional model of the hilt was created based on optical scanner measurements performed on a hilt recently discovered during archaeological excavations. Three different configurations of the gating system were considered, two on the pommel disk and one on the knob, and the effect of its location on the formation of casting defects was investigated. Three-dimensional computed tomography was used to detect internal defects, such as gas and shrinkage porosity, which were then compared with those calculated by simulation. The best match between actual and predicted hilt quality demonstrated the location of the gating system, which turned out to be on the pommel disk.

Nordic and Celtic: religion in southern Scandinavia during the late bronze age and early iron age

Directory of Open Access Journals (Sweden)

Marianne Görman

1990-01-01

Full Text Available By means of modern archeological research it is today possible to gain much information even from non-written material, This paper covers the late bronze age and early iron age, ca. 1000 B.C. —O. It is based on material from Denmark, the Southwest of Sweden, and the Southeast of Norway. This region formed a cultural unity since the sea bound the area together. Our main sources of knowledge of Nordic religion during this time span are votive offerings and rock-carvings. During the bronze age and early iron age the Nordic peasant population had intensive contacts with the Southeastern and Centralparts of Europe. A great quantity of imported objects bear evidence of widespread connections. The inhabitants of the Nordic area not only brought home objects, but also ideas and religious conceptions. This is clearly reflected in the iconography. The cultures with which connections were upheld and from which ideas were introduced were those of Hallstatt and La Tène. They were both Celtic iron age cultures prospering in Central Europe at the same time as the late bronze age and early iron age in the Nordic area. This means that the new symbols in the Nordic area come from a Celtic environment. Consequently, Celtic religion such as it may be found in the pre-Roman period, can clarify the meaning of the conceptions, linked with these symbols.

Environmental roots of the late bronze age crisis.

Directory of Open Access Journals (Sweden)

David Kaniewski

Full Text Available The Late Bronze Age world of the Eastern Mediterranean, a rich linkage of Aegean, Egyptian, Syro-Palestinian, and Hittite civilizations, collapsed famously 3200 years ago and has remained one of the mysteries of the ancient world since the event's retrieval began in the late 19(th century AD/CE. Iconic Egyptian bas-reliefs and graphic hieroglyphic and cuneiform texts portray the proximate cause of the collapse as the invasions of the "Peoples-of-the-Sea" at the Nile Delta, the Turkish coast, and down into the heartlands of Syria and Palestine where armies clashed, famine-ravaged cities abandoned, and countrysides depopulated. Here we report palaeoclimate data from Cyprus for the Late Bronze Age crisis, alongside a radiocarbon-based chronology integrating both archaeological and palaeoclimate proxies, which reveal the effects of abrupt climate change-driven famine and causal linkage with the Sea People invasions in Cyprus and Syria. The statistical analysis of proximate and ultimate features of the sequential collapse reveals the relationships of climate-driven famine, sea-borne-invasion, region-wide warfare, and politico-economic collapse, in whose wake new societies and new ideologies were created.

14C dating of the Early to Late Bronze Age stratigraphic sequence of Aegina Kolonna, Greece

International Nuclear Information System (INIS)

Wild, E.M.; Gauss, W.; Forstenpointner, G.; Lindblom, M.; Smetana, R.; Steier, P.; Thanheiser, U.; Weninger, F.

2010-01-01

Aegina Kolonna, located in the center of the Saronic Gulf in the Aegean Mediterranean (Greece), is one of the major archaeological sites of the Aegean Bronze Age with a continuous stratigraphic settlement sequence from the Late Neolithic to the Late Bronze Age. Due to its position next to the maritime cross roads between central mainland Greece, the northeast Peloponnese, the Cyclades and Crete, the island played an important role in the trade between these regions. In the course of new excavations, which focused on the exploration of the Early, Middle and Late Bronze Age at Kolonna, several short lived samples from different settlement phases have been 14 C-dated with the AMS method at the VERA laboratory. Bayesian sequencing of the 14 C data according to the stratigraphic position of the samples in the profile was performed to enable estimates of the transition time between the cultural phases. The Aegina Kolonna 14 C sequence is one of the longest existing so far for the Aegean Bronze Age, and therefore of major importance for the absolute Bronze Age chronology in this region. Preliminary results indicate that the Middle Helladic period seems to have started earlier and lasted longer than traditionally assumed. Further, at the present stage of our investigation we can give also a very tentative time frame for the Santorini volcanic eruption which seems to be in agreement with the science derived VDL date.

Armorican arrowhead biographies: Production and function of an Early Bronze Age prestige good from Brittany (France

Directory of Open Access Journals (Sweden)

Clément Nicolas

2014-09-01

Full Text Available Brittany can pride itself on the Armorican arrowheads found in Early Bronze Age graves (2150-1700 BC. In the present state of knowledge, these are the only specialized craft products in knapped flint produced in this region at the western edge of continental Europe. Admired since the 19th century, these flint arrowheads have never really been studied. Due to the wealth of graves and grave-goods, a relatively precise study can be undertaken of the development of these craft products, despite the low number of reliable radiocarbon dates.These arrowheads are characterized by a well-defined type (pointed tang and oblique barbs most often combined with ogival form. Raw materials show the selection of a high quality yellow translucent flint, of which the origin has to be sought at more than 400 kilometers (Lower Turonian flint from Cher Valley. From a technical point of view, Armorican arrowheads reveal a great mastery of retouch by pressure-flaking. This skill is written in stone by the perfection of forms, the extreme thinness (until 2,5 mm thick and very long barbs (until 25 mm long. Such work could not have been done without the use of copper, even bronze, awls. Moreover, some marks may testify to the implication of these tools. On 549 arrowheads that have reached to us, none of them presents diagnostical impact features. However, use-wear analysis indicates that most of them were hafted (adhesive traces, bright spots, blunt edges. These facts suggest that they are less functional arrowheads than objects for the show. In the graves, Armorican arrowheads are frequently set down carefully in wooden boxes taking the shaft off.The Armorican arrowheads with their exotic raw materials, their high-degree of technicality, and their absence of use, have all features of a prestige good. They have been discovered by dozens in few graves under barrows with very rich funeral items (bronze daggers decorated with golden pins, precious bracers, silver beakers

Capital Cities in Late Bronze Age Greater Mesopotamia

OpenAIRE

Carlson, Evan

2017-01-01

This dissertation explores the relationships among founding capital cities, defining state territories, and creating and propagating national identities. In the modern period and deep into history, nascent nations struggling to define themselves and unify diverse states have founded capital cities to embody a national ethos, reveal a shared history, direct the relationship among subjects and government, and differentiate a society from its international peers. In the Late Bronze Age (LBA) (15...

Palaeoethnobotanical Data from the High Mountainous Early Bronze Age Settlement of Tsaghkasar-1 (Mt. Aragats, Armenia

Directory of Open Access Journals (Sweden)

Roman Hovsepyan

2011-09-01

Full Text Available Palaeoethnobotanical investigations suggest that at least part of the Early Bronze Age population of Tsaghkasar was settled and practiced agriculture in the high mountainous zone. People there appear to have cultivated hexa‐ and tetraploid wheats (probably bread wheat and emmer and barley (possibly hulled. Bronze Age agriculture in the Southern Caucasus differs from earlier and later period when cultivation of pulses, oil‐producing plants, and other plants was common. This emphasis on the cultivation and use of certain cereal grains at Early Bronze sites such as Tsaghkasar can tentatively be added to a constellation of practices associated with the Kura‐Araxes culture in the South Caucasus.

Building the Bronze Age : Architectural and social change on the Greek mainland during Early Helladic III, Middle Helladic and Late Helladic I

NARCIS (Netherlands)

Wiersma, Corien

2014-01-01

Communities living on the Greek Mainland during the end of the Early Bronze Age (EBA. ca. 2200-2000 BC) and the earlier Middle Bronze Age (MBA, ca. 2000-1800 BC) were thought to be relatively simple and egalitarian, while during the later MBA and early Late Bronze Age (LBA, ca. 1700-1600 BC),

Non-invasive PGAA, PIXE and ToF-ND analyses on Hungarian Bronze Age defensive armour

International Nuclear Information System (INIS)

Marianne Moedlinger; Imre Kovacs; Zoltan Szoekefalvi-Nagy; Ziad El Morr

2014-01-01

Non-invasive, archaeometric analyses on selected Hungarian Bronze Age defensive armour is presented here: three greaves, three helmets two shields as well as one vessel fragment were analysed with PIXE, PGAA and TOF-ND. The detected alloy elemental and phase composition as well as its intergranular or spatial concentration distribution reveals important insights into the alloys used and the manufacturing techniques applied c. 1200-950 BC, and allows to reconstruct the production techniques used during the Late Bronze Age. (author)

Breakthrough of the Nordic Bronze Age: Transcultural warriorhood and a Carpathian crossroad in the 16th century BC

DEFF Research Database (Denmark)

Vandkilde, Helle

2014-01-01

The breakthrough of the Nordic Bronze Age (NBA) c. 1600 bc as a koiné within Bronze Age Europe can be historically linked to the Carpathian Basin. Nordic distinctiveness entailed an entanglement of cosmology and warriorhood, albeit represented through different media in the hotspot zone (bronze) ...... momentous creativity that drew upon Carpathian originals, contacts and a pool of Carpathian ideas, but ultimately drawing on emergent Mycenaean hegemonies in the Aegean. This provided the incentive for a cosmology-rooted resource from which the NBA could take its starting point....

Palaeoethnobotanical Data from the High Mountainous Early Bronze Age Settlement of Tsaghkasar-1 (Mt. Aragats, Armenia)

OpenAIRE

Roman Hovsepyan

2011-01-01

Palaeoethnobotanical investigations suggest that at least part of the Early Bronze Age population of Tsaghkasar was settled and practiced agriculture in the high mountainous zone. People there appear to have cultivated hexa‐ and tetraploid wheats (probably bread wheat and emmer) and barley (possibly hulled). Bronze Age agriculture in the Southern Caucasus differs from earlier and later period when cultivation of pulses, oil‐producing plants, and other plants was common. This emphasis on the c...

The Agricultural Landscape of Tel Burna: Ecology and Economy of a Bronze Age/Iron Age Settlement in the Southern Levant

Directory of Open Access Journals (Sweden)

Orendi Andrea

2017-12-01

Full Text Available The Shephelah, known as the breadbasket of the southern Levant, is one of the more extensively investigated regions of the southern Levant in terms of archaeobotanical research. However, studies dealing with agriculture are scarce in comparison to the archaeobotanical data available. The analysis of the archaeobotanical assemblage in combination with the archaeological remains from Tel Burna will contribute to the investigation of the agriculture of the Shephelah. Several seasons of excavation revealed a cultic complex dating to the Late Bronze Age and an Iron Age II settlement with various agricultural installations such as silos and wine or olive presses. In this paper, we present the agricultural features in conjunction with the systematical archaeobotanical sampling, which enables us to reconstruct the types of crop plants cultivated at the site. Grass pea seeds dominate the assemblage collected from the Late Bronze Age complex, which may point to a connection to the Aegean. The Iron Age assemblage is distinguished by a significantly broad range of crop plants which were cultivated in vicinity of the tell. The archaeological Iron Age remains indicate that the processing of secondary products such as olive oil, wine, or textiles took place within the Iron Age settlement of Tel Burna. This first comprehensive overview describes the character of agricultural production in the Late Bronze Age to Iron Age environmental and geopolitical transformations.

Metalworking fluid-associated hypersensitivity pneumonitis: a workshop summary.

Science.gov (United States)

Kreiss, K; Cox-Ganser, J

1997-10-01

A workshop discussing eight clusters of hypersensitivity pneumonitis in the automotive industry among metalworking fluid-exposed workers concluded that a risk exists for this granulomatous lung disease where water-based fluids are used and unusual microbial contaminants predominate. Strong candidates for microbial etiology are nontuberculous mycobacteria and fungi. Cases of hypersensitivity pneumonitis occur among cases with other work-related respiratory symptoms and chest diseases. Reversibility of disease has occurred in many cases with exposure cessation, allowing return to work to jobs without metalworking fluid exposures or, in some situations, to jobs without the same metalworking fluid exposures. Cases have been recognized with metalworking fluid exposures generally less than 0.5 mg/m3. The workshop participants identified knowledge gaps regarding risk factors, exposure-response relationships, intervention efficacy, and natural history, as well as surveillance needs to define the extent of the problem in this industry. In the absence of answers to these questions, guidance for prevention is necessarily limited.

Use your eyes - metallographic versus superficial traces of the crafting of Bronze Age ornaments

DEFF Research Database (Denmark)

Nørgaard, Heide Wrobel

and superficial archaeological examinations can be used to understand prehistoric craft. Furthermore, it will show that with an intensive knowledge about previous scientific investigations the superficial traces preserved can reveal a great amount of information and could talk for themselves. Taking as an example...... the early and middle Bronze Age bronze ornaments from North Germany, superficial traces of the metal crafting process, visible with the naked eye, will be compared with metallographic images. The aim of this presentation is to give an overview over the crafting traces everybody could see (with a bit...

Metal Adornments of Clothing and Headwear in the Bronze Age of Western Siberia (issues of research and reconstruction ..

Directory of Open Access Journals (Sweden)

Umerenkova Olga V.

2017-09-01

Full Text Available The article considers issues related to the principals of scientific approach, methods and procedure of costume reconstruction on the basis of archaeological materials dating back to the Bronze Age discovered in the territory of Western Siberia. The costume is considered by researchers as one of the brightest manifestations of material culture. Its decoration provides multidisciplinary information containing elements of ideology and aesthetic norms together with traditions and social relationships. Reconstruction of clothing and headwear adornments in archaeological literature related to the Bronze Age is one of the understudied topics. Researchers use various sources for its recreation: archaeological materials, written historical, literature and folklore sources, and fine art items. A significant amount of source items has accumulated over the last decades, although the analysis and principles of processing thereof have not been sufficiently covered in special literature. In order to increase the informative capabilities of adornments as sources for the reconstruction of the Bronze Age costume, the author suggested a scheme of accounting for the location of adornments with respect to the remains of the buried when the excavations are documented. The article features the results of the author's reconstruction of women's headwear decoration with metal articles executed on the basis of Bronze Age materials.

Exceptionally high levels of lead pollution in the Balkans from the Early Bronze Age to the Industrial Revolution.

Science.gov (United States)

Longman, Jack; Veres, Daniel; Finsinger, Walter; Ersek, Vasile

2018-05-29

The Balkans are considered the birthplace of mineral resource exploitation and metalworking in Europe. However, since knowledge of the timing and extent of metallurgy in southeastern Europe is largely constrained by discontinuous archaeological findings, the long-term environmental impact of past mineral resource exploitation is not fully understood. Here, we present a high-resolution and continuous geochemical record from a peat bog in western Serbia, providing a clear indication of the extent and magnitude of environmental pollution in this region, and a context in which to place archaeological findings. We observe initial evidence of anthropogenic lead (Pb) pollution during the earliest part of the Bronze Age [∼3,600 years before Common Era (BCE)], the earliest such evidence documented in European environmental records. A steady, almost linear increase in Pb concentration after 600 BCE, until ∼1,600 CE is observed, documenting the development in both sophistication and extent of southeastern European metallurgical activity throughout Antiquity and the medieval period. This provides an alternative view on the history of mineral exploitation in Europe, with metal-related pollution not ceasing at the fall of the western Roman Empire, as was the case in western Europe. Further comparison with other Pb pollution records indicates the amount of Pb deposited in the Balkans during the medieval period was, if not greater, at least similar to records located close to western European mining regions, suggestive of the key role the Balkans have played in mineral resource exploitation in Europe over the last 5,600 years. Copyright © 2018 the Author(s). Published by PNAS.

HANDICRAFT IN LATE BRONZE-EARLY IRON AGE IN NAKHCHIVAN

OpenAIRE

Toğrul HALİLOV

2012-01-01

The article handicraft have been learnt in the Nakhchivan late bronze-early iron age. It was defined that pottery wasone of the ancient craftsmanship areas in Nakhichivan. At that time Nakhichivan, as well as the other regions of Azerbaijan, was an important centre of craftsmanship. The pottery products differed from one another in their size, shape, ornaments on them, the material the were made of and the technology. The pottery products made by Nakhichivan potters were divided into two grou...

Human paleodiet and animal utilization strategies during the Bronze Age in northwest Yunnan Province, southwest China.

Directory of Open Access Journals (Sweden)

Lele Ren

Full Text Available Reconstructing ancient diets and the use of animals and plants augment our understanding of how humans adapted to different environments. Yunnan Province in southwest China is ecologically and environmentally diverse. During the Neolithic and Bronze Age periods, this region was occupied by a variety of local culture groups with diverse subsistence systems and material culture. In this paper, we obtained carbon (δ13C and nitrogen (δ15N isotopic ratios from human and faunal remains in order to reconstruct human paleodiets and strategies for animal exploitation at the Bronze Age site of Shilinggang (ca. 2500 Cal BP in northwest Yunnan Province. The δ13C results for human samples from Shilinggang demonstrate that people's diets were mainly dominated by C3-based foodstuffs, probably due to both direct consumption of C3 food and as a result of C3 foddering of consumed animals. Auxiliary C4 food signals can also be detected. High δ15N values indicate that meat was an important component of the diet. Analysis of faunal samples indicates that people primarily fed pigs and dogs with human food waste, while sheep/goats and cattle were foddered with other food sources. We compare stable isotope and archaeobotanical data from Shilinggang with data from other Bronze Age sites in Yunnan to explore potential regional variation in subsistence strategies. Our work suggests that people adopted different animal utilization and subsistence strategies in different parts of Yunnan during the Bronze Age period, probably as local adaptations to the highly diversified and isolated environments in the region.

Chisels in the italian Bronze Age: technological and typological aspects

Directory of Open Access Journals (Sweden)

Speciale, Claudia

2010-12-01

Full Text Available Bronze chisels are tools used “à percussion posée”; this means they need a minimum length and some functional parts (tang, body, blade; they could have a handle of perishable material and they were used with a hammer to work wood, bronze and other materials. Chisels can be classified following their functional parts; the first element is the shape (rod or socketed chisel; the second one is body section; the third one is tang section. Chronology and distribution of every type were identified to obtain a general view of this class of tools during the Italian Bronze Age.

Los cinceles de bronce son herramientas que se utilizan en percusión apoyada (à percussion posée, por consiguiente, necesitan una longitud mínima y algunas partes funcionales (empuñadura, cuerpo, hoja; podrían tener un mango de material perecedero. Se utilizan con un martillo en el labrado de la madera, del bronce y de otros materiales. Los cinceles se pueden clasificar de acuerdo con los siguientes elementos funcionales: el primero es la forma (cincel de varilla o de cubo; el segundo es la sección del cuerpo; el tercero es la sección de la empuñadura. La cronología y la distribución de cada tipo se identificaron para obtener una visión general de esta clase de instrumentos durante la Edad del Bronce en Italia.

Computed Tomography and Computed Radiography of late Bronze Age Cremation Urns from Denmark

DEFF Research Database (Denmark)

Harvig, Lise Lock; Lynnerup, Niels; Amsgaard Ebsen, Jannie

2012-01-01

To improve methods used to study prehistoric cremation rituals, cremation urns from the Danish late Bronze Age were examined using Computed Tomography and Computed Radiography (Digital X-ray). During microexcavation, the digital images were used as registration tool. Our results suggest...

Female exogamy and gene pool diversification at the transition from the Final Neolithic to the Early Bronze Age in central Europe.

Science.gov (United States)

Knipper, Corina; Mittnik, Alissa; Massy, Ken; Kociumaka, Catharina; Kucukkalipci, Isil; Maus, Michael; Wittenborn, Fabian; Metz, Stephanie E; Staskiewicz, Anja; Krause, Johannes; Stockhammer, Philipp W

2017-09-19

Human mobility has been vigorously debated as a key factor for the spread of bronze technology and profound changes in burial practices as well as material culture in central Europe at the transition from the Neolithic to the Bronze Age. However, the relevance of individual residential changes and their importance among specific age and sex groups are still poorly understood. Here, we present ancient DNA analysis, stable isotope data of oxygen, and radiogenic isotope ratios of strontium for 84 radiocarbon-dated skeletons from seven archaeological sites of the Late Neolithic Bell Beaker Complex and the Early Bronze Age from the Lech River valley in southern Bavaria, Germany. Complete mitochondrial genomes documented a diversification of maternal lineages over time. The isotope ratios disclosed the majority of the females to be nonlocal, while this is the case for only a few males and subadults. Most nonlocal females arrived in the study area as adults, but we do not detect their offspring among the sampled individuals. The striking patterns of patrilocality and female exogamy prevailed over at least 800 y between about 2500 and 1700 BC. The persisting residential rules and even a direct kinship relation across the transition from the Neolithic to the Bronze Age add to the archaeological evidence of continuing traditions from the Bell Beaker Complex to the Early Bronze Age. The results also attest to female mobility as a driving force for regional and supraregional communication and exchange at the dawn of the European metal ages.

Chipped Stone Industry of the Moravian Early Bronze Age – Typological Considerations

Czech Academy of Sciences Publication Activity Database

Kopacz, J.; Matějka, František; Matějková, Jiřina; Přichystal, A.; Škrdla, Petr; Šebela, Lubomír

2006-01-01

Roč. 2, - (2006), s. 95-117. ISBN 80-7248-395-1. ISSN N R&D Projects: GA AV ČR(CZ) IAA8001202 Institutional research plan: CEZ:AV0Z80010507; CEZ:AV0Z20650511 Keywords : Early Bronze Age * Moravia * stone chipped industry, segment Subject RIV: AC - Archeology, Anthropology, Ethnology

System of performance indicators for SMEs, metalworking sector

Directory of Open Access Journals (Sweden)

Cristina Viteri Sánchez

2014-03-01

Full Text Available (Received: 2013/03/05 - Accepted: 2013/03/25This paper focused on the design and proposal of management indicators for small and medium metalworking enterprises (SMEs in Quito. Metalworking number was established for the study. It was met and determined which areas deserve to be constantly monitored, by analyzing the performance of the companies, for this purpose, it was used a SWOT analysis, interviews and meetings with company managers , the results demanded the approach of a generic strategy, which included the formulation of the mission , vision and corporate values. Objectives and goals were established, they were classified according to the four perspectives of the Balanced Scorecard. Then it was possible to identify indicators to measure the proper functioning of the strategy proposed. 10 indicators of management were developed, according to the analysis of the reality of metalworking enterprises. So it was determined 3 financial indicators, 2 indicators focused on customers, 3 indicators for monitor internal business processes and 2 addressed the prospect of learning and growth. The use of these indicators is the key of performance and process control in each metalworking company.

Synchrotron radiation-based x-ray analysis of bronze artifacts from an Iron Age site in the Judean hills

International Nuclear Information System (INIS)

Friedman, E. S.; Brody, A. J.; Young, M. L.; Almer, J. D.; Serge, C. U.; Mini, S. M.

2008-01-01

Seven bronze bangles from Tell en-Nasbeh, northern Judah, were investigated to understand the phase composition and manufacturing process of the artifacts, and possibly suggest a provenance for their origin. Synchrotron x-ray radiation diffraction (XRD) and fluorescence (XRF) were used in the analysis to avoid any destructive sampling and at the same time penetrate through the surface into the core metal. These techniques enabled us to determine that the bangles were not just tin bronze, but leaded tin bronze. Based on excavation reports, it is unlikely that the metal objects were manufactured locally at Tell en-Nasbeh; rather, preliminary XRD and XRF data point towards the neighboring region of Edom as their origin. Despite their political enmity during the Iron Age II, the data suggest that Judahite social demands for bronze may have fostered a strong economic relationship between these two polities

The irritancy of metalworking fluids: a laser Doppler flowmetry study

NARCIS (Netherlands)

de Boer, E. M.; Scholten, R. J.; van Ketel, W. G.; Bruynzeel, D. P.

1990-01-01

Irritant contact dermatitis is common in metalworkers exposed to metalworking fluids (MWF). The irritancy of 3 commercially available water-based cutting fluids in maximal user's concentration and 2 neat oils was investigated in 23 healthy volunteers. Additionally, the irritancy of some groups of

Laser beam diagnostics for metalworking applications

International Nuclear Information System (INIS)

Ramos, T.J.; Lingenfelter, A.C.

1984-01-01

The Materials Fabrication Division of Lawrence Livermore National Laboratory (LLNL) has three pulsed Nd-YAG lasers dedicated to metalworking. The units are used in a job shop primarily for welding. They also have a number of applications requiring cutting and drilling capability. Each of these metalworking operations requires somewhat different laser beam characteristics. As most investigators have found, the mode of the laser beam and the mode stability are the key variables which must be controlled if optimum results are to be achieved. The authors use several techniques to observe and measure these variables, i.e. Charge Couple Device (CCD) Camera, Thermal Image Plate and thermal-sensitive paper

Infant/child burials and social reproduction in the Bronze Age and Early Iron Age (c. 2100-800 BC) of Central Italy

NARCIS (Netherlands)

Rossenberg, E.A.; Bacvarov, K

2008-01-01

Abstract: Special treatment of the remains of children is a well-known feature in Central Italy from the Neolithic onwards. Here I will focus on the evidence for the Bronze Age and Early Iron Age in two adjacent Central Italian regions (Abruzzo and Lazio). It will be argued that mortuary practice

Strangers in a strange land: Egyptians in southern Palestine during the Bronze Age

Directory of Open Access Journals (Sweden)

Rachael Sparks

2002-10-01

Full Text Available When the Institute of Archaeology was formally established in 1937, it became responsible for housing Sir Flinders Petrie’s collection of archaeological material from Palestine. This unique inheritance has great value as a research collection, as its curator demonstrates here in her discussion of interaction between Egypt and Palestine in the Bronze Age.

A lead isotope ratio data base of ancient Chinese bronzes

International Nuclear Information System (INIS)

Jin Zhengyao

2005-01-01

A data base of lead isotope ratio of ancient Chinese bronzes is set up. There are 2888 members, including bronze objects, casting remains, and related ores, etc. in the file. The file contents of data base are made from analysis work on Chinese bronze previously carried out in several laboratories in China, Japan and USA. The main body of the file contents is formed from records, analysis data, reference documents, and images. The data base is designed for sharing information in provenance study on raw metal material for bronze production in China Bronze Age. (author)

Palaeodemographic and palaeopathological characteristics of individuals buried in three Bronze Age sites from southern Croatia

Directory of Open Access Journals (Sweden)

M. Novak

2011-12-01

Full Text Available The purpose of this study is to reconstruct paleodemographic and paleopathological characteristics of sixteen individuals (three subadults, seven males and six females buried in three Bronze Age sites (Crip, Matkovići, and Veliki Vanik located in southern Croatia. The analysed sample is characterised by the presence of pathological changes which are often associated with stressful episodes such as anaemia, inadequate nutrition, infectious diseases and the occurrence of parasites. Cribra orbitalia, dental enamel hypoplasia, porotic hyperostosis and periostitis were observed in seven out of sixteen analysed skeletons. One ulnar “parry” fracture and three fractures of the frontal bone strongly suggest the presence of deliberate interpersonal violence within the studied communities. The average life span of the adults, as well as the number and character of the observed pathologies, suggest a relatively poor life quality and harsh living conditions in the studied region during the Bronze Age.

Mobility in Central European Late Eneolithic and Early Bronze Age: femoral cross-sectional geometry

Czech Academy of Sciences Publication Activity Database

Sládek, Vladimír; Berner, M.; Sailer, R.

2006-01-01

Roč. 130, č. 3 (2006), s. 320-332 ISSN 0002-9483 R&D Projects: GA ČR GP206/01/D018 Institutional research plan: CEZ:AV0Z60930519 Keywords : biomechanics * mobility * bone strength * Late Eneolithic * Early Bronze Age Subject RIV: AC - Archeology, Anthropology, Ethnology Impact factor: 2.136, year: 2006

A New Chronology for the Bronze Age of Northeastern Thailand and Its Implications for Southeast Asian Prehistory.

Science.gov (United States)

Higham, Charles F W; Douka, Katerina; Higham, Thomas F G

2015-01-01

There are two models for the origins and timing of the Bronze Age in Southeast Asia. The first centres on the sites of Ban Chiang and Non Nok Tha in Northeast Thailand. It places the first evidence for bronze technology in about 2000 B.C., and identifies the origin by means of direct contact with specialists of the Seima Turbino metallurgical tradition of Central Eurasia. The second is based on the site of Ban Non Wat, 280 km southwest of Ban Chiang, where extensive radiocarbon dating places the transition into the Bronze Age in the 11th century B.C. with likely origins in a southward expansion of technological expertise rooted in the early states of the Yellow and Yangtze valleys, China. We have redated Ban Chiang and Non Nok Tha, as well as the sites of Ban Na Di and Ban Lum Khao, and here present 105 radiocarbon determinations that strongly support the latter model. The statistical analysis of the results using a Bayesian approach allows us to examine the data at a regional level, elucidate the timing of arrival of copper base technology in Southeast Asia and consider its social impact.

Solar Orientations of Bronze Age Shrines in Gournia, Crete

Science.gov (United States)

Henriksson, G.; Blomberg, M.

2009-08-01

The measurements of orientations at Gournia are part of the Uppsala University project to investigate the nature of Minoan astronomy. The town is typical of Minoan settlements and therefore was chosen for the selection of representative buildings from different kinds of Minoan sites. We use classical archaeoastronomical methods and our own computer programs for calculation of the positions of the sun, moon and stars in the Aegean Bronze Age. We discovered that Gournia is the fourth Minoan site with shrines that are oriented to sunrise at lunar month intervals with respect to the equinoxes. There is also a Mycenaean shrine in the town and we compared its orientation to Mycenaean buildings of the same type in Crete.

Archaeometric study of a bronze age sword discovered at Giurgiu, Romania

International Nuclear Information System (INIS)

Olariu, Agata; Badica, Teodor; Alexandrescu, Emilian; Avram, Alexandru

2008-01-01

The compositional scheme of a Bronze Age sword, found near the town of Giurgiu in Romania has been determined by the method of particle-induced X-ray emission (PIXE). The elemental composition of the sword was compared with the composition of other swords from the same geographic area, the Danubian plain from Bulgaria, and Transylvania regions. Both the physical analyzes and the archaeological considerations show that the sword from Giurgiu could be associated with the swords from Bulgaria, having compositional, stylistic, temporal and geographical similitudes. (authors)

Horse-mounted invaders from the Russo-Kazakh steppe or agricultural colonists from western Central Asia? A craniometric investigation of the Bronze Age settlement of Xinjiang.

Science.gov (United States)

Hemphill, Brian E; Mallory, J P

2004-07-01

Numerous Bronze Age cemeteries in the oases surrounding the Täklamakan Desert of the Tarim Basin in the Xinjiang Uyghur Autonomous Region, western China, have yielded both mummified and skeletal human remains. A dearth of local antecedents, coupled with woolen textiles and the apparent Western physical appearance of the population, raised questions as to where these people came from. Two hypotheses have been offered by archaeologists to account for the origins of Bronze Age populations of the Tarim Basin. These are the "steppe hypothesis" and the "Bactrian oasis hypothesis." Eight craniometric variables from 25 Aeneolithic and Bronze Age samples, comprising 1,353 adults from the Tarim Basin, the Russo-Kazakh steppe, southern China, Central Asia, Iran, and the Indus Valley, are compared to test which, if either, of these hypotheses are supported by the pattern of phenetic affinities possessed by Bronze Age inhabitants of the Tarim Basin. Craniometric differences between samples are compared with Mahalanobis generalized distance (d2), and patterns of phenetic affinity are assessed with two types of cluster analysis (the weighted pair average linkage method and the neighbor-joining method), multidimensional scaling, and principal coordinates analysis. Results obtained by this analysis provide little support for either the steppe hypothesis or the Bactrian oasis hypothesis. Rather, the pattern of phenetic affinities manifested by Bronze Age inhabitants of the Tarim Basin suggests the presence of a population of unknown origin within the Tarim Basin during the early Bronze Age. After 1200 B.C., this population experienced significant gene flow from highland populations of the Pamirs and Ferghana Valley. These highland populations may include those who later became known as the Saka and who may have served as "middlemen" facilitating contacts between East (Tarim Basin, China) and West (Bactria, Uzbekistan) along what later became known as the Great Silk Road. Copyright

Archaeointensity study of five Late Bronze Age fireplaces from Corent (Auvergne, France)

OpenAIRE

Hervé , Gwenaël; Chauvin , Annick; Milcent , Pierre-Yves; Tramon , Arthur

2016-01-01

International audience; Recent excavations at Corent (France) unearthed a vast Late Bronze Age settlement. The high density of fireplaces especially highlights it. The present study focuses on the archaeomagnetic study of five fireplaces. These ones were dated between 950 and 800 BCE by cross-dating of metallic and ceramic artefacts and by radiocarbon. The main objective of our study is to increase the archaeointensity database in Western Europe at the beginning of the first millennium BCE. T...

Community-acquired Pseudomonas aeruginosa-pneumonia in a previously healthy man occupationally exposed to metalworking fluids

Directory of Open Access Journals (Sweden)

Fernando Peixoto Ferraz de Campos

2014-09-01

Full Text Available Although the Pseudomonas aeruginosa infection is well known and frequently found in hospitals and nursing care facilities, many cases are also reported outside these boundaries. In general, this pathogen infects debilitated patients either by comorbidities or by any form of immunodeficiency. In cases of respiratory infection, tobacco abuse seems to play an important role as a risk factor. In previously healthy patients, community-acquired pneumonia (CAP with P. aeruginosa as the etiological agent is extremely rare, and unlike the cases involving immunocompromised or hospitalized patients, the outcome is severe, and is fatal in up to 61.1% of cases. Aerosolized contaminated water or solutions are closely linked to the development of respiratory tract infection. In this setting, metalworking fluids used in factories may be implicated in CAP involving previously healthy people. The authors report the case of a middle-aged man who worked in a metalworking factory and presented a right upper lobar pneumonia with a rapid fatal outcome. P. aeruginosa was cultured from blood and tracheal aspirates. The autopsy findings confirmed a hemorrhagic necrotizing pneumonia with bacteria-invading vasculitis and thrombosis. A culture of the metalworking fluid of the factory was also positive for P. aeruginosa. The pulsed-field gel electrophoresis showed that both strains (blood culture and metalworking fluid were genetically indistinguishable. The authors highlight the occupational risk for the development of this P. aeruginosa-infection in healthy people.

A Living Landscape : Bronze Age settlement sites in the Dutch river area (c. 2000-800 BC)

NARCIS (Netherlands)

Arnoldussen, Stijn

2008-01-01

"A Living Landscape. Bronze Age settlements in the Dutch river area (c. 2000-800 BC)" Academisch proefschrift over de aard en dynamiek van bronstijdnederzettingen in het rivierengebied. Het bevat een introductie op de geologische processen en de paleogeografie van de Nederlandse rivierdelta als

Ancient DNA reveals traces of Iberian Neolithic and Bronze Age lineages in modern Iberian horses

DEFF Research Database (Denmark)

Lira, Jaime; Linderholm, Anna; Olaria, Carmen

2010-01-01

Iberian horses supports this suggestion. To test this hypothesis, we analysed mitochondrial DNA from 22 ancient Iberian horse remains belonging to the Neolithic, the Bronze Age and the Middle Ages, against previously published sequences. Only the medieval Iberian sequence appeared in the D1 group...... wild mares during an early Iberian domestication or restocking event, whereas the D1 group probably was introduced into Iberia in later historical times....

Variety in cereal cultivation in the Late Bronze and Early Iron Ages in relation to environmental conditions

Czech Academy of Sciences Publication Activity Database

Dreslerová, Dagmar; Kočár, Petr; Chuman, T.; Šefrna, L.; Poništiak, Š.

2013-01-01

Roč. 40, č. 4 (2013), s. 1988-2000 ISSN 0305-4403 Institutional research plan: CEZ:AV0Z80020508 Institutional support: RVO:67985912 Keywords : crop husbandry * charred cereal grains * environment * weather * soil s * Late Bronze Age/Early Iron Age Subject RIV: AC - Archeology, Anthropology, Ethnology Impact factor: 2.139, year: 2013

[The early bronze age graveyards of Franzhausen I, lower Austria. 2. Demographic analysis].

Science.gov (United States)

Berner, M

1992-04-01

In a recent study of 714 graves of the Early Bronze Age cemetery, Franzhausen I, 658 individuals were demographically analysed. The masculinity rate and the mortality rate in the age groups were of similar order compared with estimates derived from other series of this period. On the base of a stationary population model, life tables were calculated showing life expectancy at birth to be 25.8 years and at the age of 20, 17.7 years. Also computed were: the crude death rate (Z = 38.8); and the population size (P = 31 or 65). The lack of infants were estimated by regressions (5q0 = 58%) and the results are discussed.

Diet Reconstructed From an Analysis of Plant Microfossils in Human Dental Calculus From the Bronze Age Site of Shilinggang, Southwestern China

Science.gov (United States)

Zhang, N.; Dong, G.; Yang, X.; Zuo, X.; Kang, L.; Ren, L.; Liu, H.; Li, H.; Min, R.; Liu, X.; Zhang, D.; Chen, F.

2017-12-01

The extracted microfossils from the dental calculus of ancient teeth are a new form of archaeological evidence which can provide direct information on the plant diet of a population. Here, we present the results of analyses of starch grains and phytoliths trapped in the dental calculus of humans who occupied the Bronze Age site of Shilinggang ( 2500 cal yr BP) in Yunnan Province, southwestern China. The results demonstrate that the inhabitants consumed a wide range of plants, including rice, millet, and palms, together with other food plants which have not previously been detected in Yunnan. The discovery of various underground storage organs (USOs; tubers, roots, bulbs, and rhizomes) and acorns complements the application of conventional macrofossil and isotope studies to understand the diet of the Bronze Age human population of Yunnan. The wide variety of plant foods consumed suggests that the inhabitants adopted a broad-spectrum strategy of gathering food and cultivating crops in northwest Yunnan Province in the late Bronze Age at a time when agricultural societies were developed in the central plains of China.

Absolute dating of the Aegean Late Bronze Age

International Nuclear Information System (INIS)

Warren, P.M.

1987-01-01

A recent argument for raising the absolute date of the beginning of the Aegean Late Bronze (LB) Age to about 1700 B.C. is critically examined. It is argued here that: (1) the alabaster lid from Knossos did have the stratigraphical context assigned to it by Evans, in all probability Middle Minoan IIIA, c. 1650 B.C.; (2) the attempt to date the alabastron found in an early Eighteenth Dynasty context at Aniba to Late Minoan IIIA:1 is open to objections; (3) radiocarbon dates from Aegean LB I contexts are too wide in their calibrated ranges and too inconsistent both within and between site sets to offer any reliable grounds at present for raising Aegean LB I absolute chronology to 1700 B.C. Other evidence, however, suggests this period began about 1600 B.C., i.e. some fifty years earlier than the conventional date of 1550 B.C. (author)

Social change in ‘Phoenicia’ in the late Bronze/early Iron Age transition

OpenAIRE

Boyes, Philip

2013-01-01

This dissertation explores social, cultural and political changes in the region later known as ‘Phoenicia’ during the period of approximately 1300-900 BC. By applying modern approaches to theoretical questions such as the nature of social change, identity, migration and how such phenomena are represented in the archaeological record, this dissertation aims to provide a discussion of Late Bronze/Early Iron Age Phoenicia based on a more solid methodological foundation than has of...

15 CFR 700.31 - Metalworking machines.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Metalworking machines. 700.31 Section 700.31 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE NATIONAL SECURITY INDUSTRIAL BASE REGULATIONS...

Rectal cancer and exposure to metalworking fluids in the automobile manufacturing industry.

Science.gov (United States)

Malloy, Elizabeth J; Miller, Katie L; Eisen, Ellen A

2007-04-01

Rectal cancer has been previously associated with exposure to metalworking fluids in a cohort mortality study of autoworkers. To better specify the exposure-response relationship with straight metalworking fluids (mineral oils) by applying non-parametric regression methods that avoid linearity constraints and arbitrary exposure cut points and by lagging exposure to account for cancer latency, in a nested case-control analysis. In addition to the classical Poisson regression with categorical exposure, survival models with penalised splines were used to estimate the exposure-response relationship between cumulative exposure to straight metalworking fluid and mortality from rectal cancer. Exposures to water-based metalworking fluids were treated as potential confounders, and all exposures were lagged by 5, 10, 15 and 20 years to account for cancer latency. The influence of the highest exposures was dealt with by a log transformation and outlier removal. The sensitivity of the penalised splines to alternative criteria for model selection and to the placement of knots was also examined. The hazard ratio for mortality from rectal cancer increased essentially linearly with cumulative exposure to straight metalworking fluid (with narrow confidence bands) up to a maximum of 2.2 at the 99th centile of exposure and then decreased (with wide confidence bands). Lagging exposure up to 15 years increased the initial steepness of the curve and raised the maximum hazard ratio to 3.2. Non-parametric smoothing of lagged exposures has shown stronger evidence for a causal association between straight metalworking fluid and rectal cancer than was previously described using standard analytical methods. This analysis suggests an exposure-response trend that is close to linear and statistically significant over most of the exposure range and that increases further with lagged exposures. Smoothing should be regularly applied to environmental studies with quantitative exposure estimates to

Monumental megalithic burial and rock art tell a new story about the Levant Intermediate Bronze "Dark Ages".

Science.gov (United States)

Sharon, Gonen; Barash, Alon; Eisenberg-Degen, Davida; Grosman, Leore; Oron, Maya; Berger, Uri

2017-01-01

The Intermediate Bronze Age (IB) in the Southern Levant (ca. 2350-2000 BCE) is known as the "Dark Ages," following the collapse of Early Bronze urban society and predating the establishment of the Middle Bronze cities. The absence of significant settlements and monumental building has led to the reconstruction of IB social organization as that of nomadic, tribal society inhabiting rural villages with no central governmental system. Excavation in the Shamir Dolmen Field (comprising over 400 dolmens) on the western foothills of the Golan Heights was carried out following the discovery of rock art engravings on the ceiling of the central chamber inside one of the largest dolmens ever recorded in the Levant. Excavation of this multi-chambered dolmen, covered by a basalt capstone weighing some 50 tons, revealed a secondary multi-burial (of both adults and children) rarely described in a dolmen context in the Golan. Engraved into the rock ceiling above the multi-burial is a panel of 14 forms composed of a vertical line and downturned arc motif. 3D-scanning by structured-light technology was used to sharpen the forms and revealed the technique employed to create them. Building of the Shamir dolmens required a tremendous amount of labor, architectural mastery, and complex socio-economic organization well beyond the capacity of small, rural nomadic groups. The monumental megalithic burial of the Shamir dolmens indicates a hierarchical, complex, non-urban governmental system. This new evidence supports a growing body of recent criticism stemming from new discoveries and approaches that calls for rethinking our views of the Levantine IB "Dark Ages."

Metalworking and machining fluids

Science.gov (United States)

Erdemir, Ali; Sykora, Frank; Dorbeck, Mark

2010-10-12

Improved boron-based metal working and machining fluids. Boric acid and boron-based additives that, when mixed with certain carrier fluids, such as water, cellulose and/or cellulose derivatives, polyhydric alcohol, polyalkylene glycol, polyvinyl alcohol, starch, dextrin, in solid and/or solvated forms result in improved metalworking and machining of metallic work pieces. Fluids manufactured with boric acid or boron-based additives effectively reduce friction, prevent galling and severe wear problems on cutting and forming tools.

Portable XRF on Prehistoric Bronze Artefacts: Limitations and Use for the Detection of Bronze Age Metal Workshops

DEFF Research Database (Denmark)

Nørgaard, Heide Wrobel

2017-01-01

sections were analysed using a scanning electron microscope (SEM). Results from the corrosion crust of copper-tin alloys, and the change measured within the elemental composition from the bulk metal to the surface, greatly influenced the interpretation of the second data set, which was measured using......Two different scientific analyses—one destructive and one non destructive—were conducted on two separate groups of bronze ornaments dating from 1500–1100 BC to investigate, amongst other traits, the metal composition of their copper-tin alloys. One group of artefacts was sampled, and polished thin...... a handheld X-ray fluorescence (XRF) device. The surface of corroded bronze ornaments consists mostly of copper carbonates, oxides, and chlorides. Chemical processes, such as decuprification, change the element composition in such a manner that the original alloy cannot be traced with a non-destructive method...

OSL Age Determination of the Hearths in a Bronze Age Dwelling Site by using Bayesian Statistics

International Nuclear Information System (INIS)

Kim, Myung Jin; Yang, Hye Jin; Hong, Duk Geun

2011-01-01

OSL dating for three hearths having the sequence of use and discard in No. 29 and 29-1 dwelling sites at Sogol cultural site was carried out. Resulting from the deconvolution of natural CW-OSL decay curve and thermal zeroing test, it was turned out that OSL signal was entirely composed of the heat- and light-sensitive fast component with high photoionization cross-section and all quartz OSL signals were thermally bleached under 300 .deg. C which is the minimum temperature related to heating and cooking in Bronze age. After dose recovery test and plateau test, paleodose of each hearth sample was evaluated by using SAR method, and OSL age was determined from the ratio of paleodose to annual dose rate. For the purpose of the precision improvement of OSL age, Bayesian statistics was applied to each hearth's age and the archaeological sequence information. Finally, it could be concluded to the accurate use period of each hearth from the resultant OSL ages

OSL Age Determination of the Hearths in a Bronze Age Dwelling Site by using Bayesian Statistics

Energy Technology Data Exchange (ETDEWEB)

Kim, Myung Jin [Neosiskorea Co. Ltd., Seoul (Korea, Republic of); Yang, Hye Jin [Baekje Cultural Properties Research Institute, Gongju (Korea, Republic of); Hong, Duk Geun [Kangwon National University, Chuncheon (Korea, Republic of)

2011-06-15

OSL dating for three hearths having the sequence of use and discard in No. 29 and 29-1 dwelling sites at Sogol cultural site was carried out. Resulting from the deconvolution of natural CW-OSL decay curve and thermal zeroing test, it was turned out that OSL signal was entirely composed of the heat- and light-sensitive fast component with high photoionization cross-section and all quartz OSL signals were thermally bleached under 300 .deg. C which is the minimum temperature related to heating and cooking in Bronze age. After dose recovery test and plateau test, paleodose of each hearth sample was evaluated by using SAR method, and OSL age was determined from the ratio of paleodose to annual dose rate. For the purpose of the precision improvement of OSL age, Bayesian statistics was applied to each hearth's age and the archaeological sequence information. Finally, it could be concluded to the accurate use period of each hearth from the resultant OSL ages.

Human manipulative behavior in the Central European Late Eneolithic and Early Bronze Age: humeral bilateral asymmetry

Czech Academy of Sciences Publication Activity Database

Sládek, Vladimír; Berner, M.; Sosna, D.; Sailer, R.

2007-01-01

Roč. 133, č. 1 (2007), s. 669-681 ISSN 0002-9483 R&D Projects: GA ČR GP206/01/D018 Institutional research plan: CEZ:AV0Z60930519 Keywords : cross-sectional geometry * biomechanics * humerus * handedness * Eneolithic * Bronze Age Subject RIV: AC - Archeology, Anthropology, Ethnology Impact factor: 2.273, year: 2007

[Construction and deconstruction of masculine identities among metalworkers with RSI/WRMD].

Science.gov (United States)

Saldanha, Jorge Henrique Santos; Lima, Mônica Angelim Gomes de; Neves, Robson da Fonseca; Iriart, Jorge Alberto Bernstein

2018-05-10

This study aimed to reveal how metalworkers experience prolonged incapacity for work due to repetitive strain injury/work-related musculoskeletal disorder (RSI/WRMD) and the impact of chronic illness on the construction/deconstruction of masculinity. A qualitative study was performed, based on narrative interviews with male metalworkers in an automotive factory in the State of Bahia, Brazil. The results showed how the conflict in the experience of illness, the maintenance of male identity, and expectations of meeting the rules dictated by hegemonic masculinity are experienced and signified in daily life. Metalworkers' experience of illness with RSI/WRMD is expressed in their incapacity for work, deconstruction of self-esteem, loss of collective identity, and interruption of future prospects. In conclusion, hegemonic masculinity exposes men to more health risks, plays a mediating role in work-related illness, alters trajectories of care, and explains men's unwillingness to seek help.

First Paleoparasitological Report on the Animal Feces of Bronze Age Excavated from Shahr-e Sukhteh, Iran.

Science.gov (United States)

Makki, Mahsasadat; Dupouy-Camet, Jean; Sajjadi, Seyed Mansour Seyed; Naddaf, Saied Reza; Mobedi, Iraj; Rezaeian, Mostafa; Mohebali, Mehdi; Mowlavi, Gholamreza

2017-04-01

Shahr-e Sukhteh (meaning burnt city in Persian) in Iran is an archeological site dated back to around 3,200-1,800 BC. It is located in Sistan and Baluchistan Province of Iran and known as the junction of Bronze Age trade routes crossing the Iranian plateau. It was appointed as current study area for paleoparasitological investigations. Excavations at this site have revealed various archeological materials since 1967. In the present study, sheep and carnivore coprolites excavated from this site were analyzed by means of rehydration technique using TSP solution for finding helminth eggs. Dicrocoelium dendriticum, Capillaria sp., and Taenia sp. eggs were identified, while some other objects similar to Anoplocephalidae and Toxocara spp. eggs were also retrieved from the samples but their measured parameters did not match those of these species. The present paper illustrates the first paleoparasitological findings of Bronze Age in eastern Iran supporting the economic activities, peopling, and communication as well as the appropriate condition for zoonotic helminthiasis life cycle in Shahr-e Sukhteh archeological site.

Metallography and microstructure interpretation of some archaeological tin bronze vessels from Iran

Energy Technology Data Exchange (ETDEWEB)

Oudbashi, Omid, E-mail: o.oudbashi@aui.ac.ir [Department of Conservation of Historic Properties, Faculty of Conservation, Art University of Isfahan, Hakim Nezami Street, Sangtarashha Alley, P.O. Box 1744, Isfahan (Iran, Islamic Republic of); Davami, Parviz, E-mail: pdavami@razi-foundation.com [Faculty of Material Science and Engineering, Sharif University of Technology/Razi Applied Science Foundation, No. 27, Fernan St., Shahid Ghasem Asghari Blvd., km 21 of Karadj Makhsous Road, Tehran (Iran, Islamic Republic of)

2014-11-15

Archaeological excavations in western Iran have recently revealed a significant Luristan Bronzes collection from Sangtarashan archaeological site. The site and its bronze collection are dated to Iron Age II/III of western Iran (10th–7th century BC) according to archaeological research. Alloy composition, microstructure and manufacturing technique of some sheet metal vessels are determined to reveal metallurgical processes in western Iran in the first millennium BC. Experimental analyses were carried out using Scanning Electron Microscopy–Energy Dispersive X-ray Spectroscopy and Optical Microscopy/Metallography methods. The results allowed reconstructing the manufacturing process of bronze vessels in Luristan. It proved that the samples have been manufactured with a binary copper–tin alloy with a variable tin content that may relates to the application of an uncontrolled procedure to make bronze alloy (e.g. co-smelting or cementation). The presence of elongated copper sulphide inclusions showed probable use of copper sulphide ores for metal production and smelting. Based on metallographic studies, a cycle of cold working and annealing was used to shape the bronze vessels. - Highlights: • Sangtarashan vessels are made by variable Cu-Sn alloys with some impurities. • Various compositions occurred due to applying uncontrolled smelting methods. • The microstructure represents thermo-mechanical process to shape bronze vessels. • In one case, the annealing didn’t remove the eutectoid remaining from casting. • The characteristics of the bronzes are similar to other Iron Age Luristan Bronzes.

Piety, Practice, and Politics: Agency and Ritual in the Late Bronze Age Southern Levant

OpenAIRE

DePietro, Dana Douglas

2012-01-01

Striking changes in the archaeological record of the southern Levant during the final years of the Late Bronze Age have long fascinated scholars interested in the region and period. Attempts to explain the emergence of new forms of Canaanite material culture have typically cited external factors such as Egyptian political domination as the driving force behind culture change, relying on theoretical models of acculturation, elite-emulation and center-periphery theory. While these approaches ca...

Bronze age cosmology and rock art images. Solar ships, deer and charts

Science.gov (United States)

Dimitriadis, G.

Bronze Age societies were technologically complex. The impressive production of metal artefacts embodies clearly their astronomical culture and cosmological viewpoint. Same ascertainment is valid also for rock art. In fact, around the European landscape were discovered several cliffs engraved with solar ships, deer and charts. How one could be interpret them? Which is the hidden mentality? From the end of 3rd millennium-early 2nd millennium B. C. deep technological transformations are made by metals. New inventions such metal extraction for weapon production, horse pulling chariot used for war and the bull pulling one used for trade may shorten the culture and material distances between Central Europe and South Mediterranean area. Indeed, taphonomic studies indicate a specific modification of the human body mortuary traditional disposition (orientated to significant astronomical targets) below a substantial transformation of mortuary apparatus with spot evidence of weapons (halberds, swords, knifes) and ornaments (double spiral, lunar shape pectorals). The famous Trundhold Solar chart, the 2nd millennium terracotta chart form Dupljaja, the solar boats petroglyph in Bohusland and the horse rider carved on Philippi's cliffs were conceived by the same mentality: communion with the divinity. Culture expressions as communicate manifestation attested in rock art were produced by the same mentality presented in Bronze Age art-crafts such as, 1. Culture epidemiologic patterns dispersion took place through out iconographic motives, and, 2. Animals can play a double face function inside an analogical-mythological system: a. animal-reflex; b. animal-agent. The question is: Could such petroglyphs help us to "read" archaeoastronomical properly in an archaeological site?

Monumental megalithic burial and rock art tell a new story about the Levant Intermediate Bronze "Dark Ages".

Directory of Open Access Journals (Sweden)

Gonen Sharon

Full Text Available The Intermediate Bronze Age (IB in the Southern Levant (ca. 2350-2000 BCE is known as the "Dark Ages," following the collapse of Early Bronze urban society and predating the establishment of the Middle Bronze cities. The absence of significant settlements and monumental building has led to the reconstruction of IB social organization as that of nomadic, tribal society inhabiting rural villages with no central governmental system. Excavation in the Shamir Dolmen Field (comprising over 400 dolmens on the western foothills of the Golan Heights was carried out following the discovery of rock art engravings on the ceiling of the central chamber inside one of the largest dolmens ever recorded in the Levant. Excavation of this multi-chambered dolmen, covered by a basalt capstone weighing some 50 tons, revealed a secondary multi-burial (of both adults and children rarely described in a dolmen context in the Golan. Engraved into the rock ceiling above the multi-burial is a panel of 14 forms composed of a vertical line and downturned arc motif. 3D-scanning by structured-light technology was used to sharpen the forms and revealed the technique employed to create them. Building of the Shamir dolmens required a tremendous amount of labor, architectural mastery, and complex socio-economic organization well beyond the capacity of small, rural nomadic groups. The monumental megalithic burial of the Shamir dolmens indicates a hierarchical, complex, non-urban governmental system. This new evidence supports a growing body of recent criticism stemming from new discoveries and approaches that calls for rethinking our views of the Levantine IB "Dark Ages."

Endogenous Retroviral Insertions Indicate a Secondary Introduction of Domestic Sheep Lineages to the Caucasus and Central Asia between the Bronze and Iron Age

Science.gov (United States)

Schroeder, Oskar; Benecke, Norbert; Frölich, Kai; Peng, Zuogang; Kaniuth, Kai; Sverchkov, Leonid; Reinhold, Sabine; Belinskiy, Andrey; Ludwig, Arne

2017-01-01

Sheep were one of the first livestock species domesticated by humans. After initial domestication in the Middle East they were spread across Eurasia. The modern distribution of endogenous Jaagsiekte sheep retrovirus insertions in domestic sheep breeds suggests that over the course of millennia, successive introductions of improved lineages and selection for wool quality occurred in the Mediterranean region and most of Asia. Here we present a novel ancient DNA approach using data of endogenous retroviral insertions in Bronze and Iron Age domestic sheep from the Caucasus and Pamir mountain areas. Our findings support a secondary introduction of wool sheep from the Middle East between the Late Bronze Age and Iron Age into most areas of Eurasia. PMID:28632161

Endogenous Retroviral Insertions Indicate a Secondary Introduction of Domestic Sheep Lineages to the Caucasus and Central Asia between the Bronze and Iron Age

Directory of Open Access Journals (Sweden)

Oskar Schroeder

2017-06-01

Full Text Available Sheep were one of the first livestock species domesticated by humans. After initial domestication in the Middle East they were spread across Eurasia. The modern distribution of endogenous Jaagsiekte sheep retrovirus insertions in domestic sheep breeds suggests that over the course of millennia, successive introductions of improved lineages and selection for wool quality occurred in the Mediterranean region and most of Asia. Here we present a novel ancient DNA approach using data of endogenous retroviral insertions in Bronze and Iron Age domestic sheep from the Caucasus and Pamir mountain areas. Our findings support a secondary introduction of wool sheep from the Middle East between the Late Bronze Age and Iron Age into most areas of Eurasia.

Characterisation of a Proto-historic bronze collection by micro-EDXRF

International Nuclear Information System (INIS)

Figueiredo, Elin; Araújo, M. Fátima; Silva, Rui J.C.; Vilaça, Raquel

2013-01-01

Highlights: ► A collection of Proto-historic metal artefacts was analysed by micro-EDXRF. ► Composition of major and minor elements has been determined. ► Artefacts were manufactured in a bronze alloy with a low impurity pattern. ► The alloy shows parallels with indigenous Late Bronze Age Iberian productions. -- Abstract: Studies concerning European Proto-historic metallic artefacts can provide important clues about technological transfers during a period of time characterised by diverse cultural interactions. A collection of Proto-historic metallic artefacts from Medronhal (western Iberian Peninsula) composed by rings, bracelets and a fibula related to different cultural affiliations were investigated by micro-EDXRF to provide a major and a minor elemental characterisation. Results show that the Medronhal collection was manufactured in a Cu–Sn alloy (binary bronze) with similar Sn contents among the various types of artefacts and a low impurity pattern. Results of the type and quality of metal were compared to other artefact collections to infer about metallurgical parallels. Strong parallels with indigenous Late Bronze Age Iberian metallurgical productions were found

Characterisation of a Proto-historic bronze collection by micro-EDXRF

Energy Technology Data Exchange (ETDEWEB)

Figueiredo, Elin, E-mail: elin@itn.pt [IST/ITN, Instituto Superior Técnico, Universidade Técnica de Lisboa, Estrada Nacional 10, 2686-953 Sacavém (Portugal); CENIMAT/I3N, Departamento de Ciência dos Materiais, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, 2829-516 Caparica (Portugal); Araújo, M. Fátima [IST/ITN, Instituto Superior Técnico, Universidade Técnica de Lisboa, Estrada Nacional 10, 2686-953 Sacavém (Portugal); Silva, Rui J.C. [CENIMAT/I3N, Departamento de Ciência dos Materiais, Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, 2829-516 Caparica (Portugal); Vilaça, Raquel [CEAUCP-FCT, Instituto de Arqueologia, Departamento de História, Arqueologia e Artes, Faculdade de Letras, Universidade de Coimbra, Palácio de Sub-Ripas, 3000-395 Coimbra (Portugal)

2013-02-01

Highlights: ► A collection of Proto-historic metal artefacts was analysed by micro-EDXRF. ► Composition of major and minor elements has been determined. ► Artefacts were manufactured in a bronze alloy with a low impurity pattern. ► The alloy shows parallels with indigenous Late Bronze Age Iberian productions. -- Abstract: Studies concerning European Proto-historic metallic artefacts can provide important clues about technological transfers during a period of time characterised by diverse cultural interactions. A collection of Proto-historic metallic artefacts from Medronhal (western Iberian Peninsula) composed by rings, bracelets and a fibula related to different cultural affiliations were investigated by micro-EDXRF to provide a major and a minor elemental characterisation. Results show that the Medronhal collection was manufactured in a Cu–Sn alloy (binary bronze) with similar Sn contents among the various types of artefacts and a low impurity pattern. Results of the type and quality of metal were compared to other artefact collections to infer about metallurgical parallels. Strong parallels with indigenous Late Bronze Age Iberian metallurgical productions were found.

Early atmospheric metal pollution provides evidence for Chalcolithic/Bronze Age mining and metallurgy in Southwestern Europe.

Science.gov (United States)

Martínez Cortizas, Antonio; López-Merino, Lourdes; Bindler, Richard; Mighall, Tim; Kylander, Malin E

2016-03-01

Although archaeological research suggests that mining/metallurgy already started in the Chalcolithic (3rd millennium BC), the earliest atmospheric metal pollution in SW Europe has thus far been dated to ~3500-3200 cal.yr. BP in paleo-environmental archives. A low intensity, non-extensive mining/metallurgy and the lack of appropriately located archives may be responsible for this mismatch. We have analysed the older section (>2100 cal.yr. BP) of a peat record from La Molina (Asturias, Spain), a mire located in the proximity (35-100 km) of mines which were exploited in the Chalcolithic/Bronze Age, with the aim of assessing evidence of this early mining/metallurgy. Analyses included the determination of C as a proxy for organic matter content, lithogenic elements (Si, Al, Ti) as markers of mineral matter, and trace metals (Cr, Cu, Zn, Pb) and stable Pb isotopes as tracers of atmospheric metal pollution. From ~8000 to ~4980 cal.yr. BP the Pb composition is similar to that of the underlying sediments (Pb 15 ± 4 μg g(-1); (206)Pb/(207)Pb 1.204 ± 0.002). A sustained period of low (206)Pb/(207)Pb ratios occurred from ~4980 to ~2470 cal.yr. BP, which can be divided into four phases: Chalcolithic (~4980-3700 cal.yr. BP), (206)Pb/(207)Pb ratios decline to 1.175 and Pb/Al ratios increase; Early Bronze Age (~3700-3500 cal.yr. BP), (206)Pb/(207)Pb increase to 1.192 and metal/Al ratios remain stable; Late Bronze Age (~3500-2800 cal.yr. BP), (206)Pb/(207)Pb decline to their lowest values (1.167) while Pb/Al and Zn/Al increase; and Early Iron Age (~2800-2470 cal.yr. BP), (206)Pb/(207)Pb increase to 1.186, most metal/Al ratios decrease but Zn/Al shows a peak. At the beginning of the Late Iron Age, (206)Pb/(207)Pb ratios and metal enrichments show a rapid return to pre-anthropogenic values. These results provide evidence of regional/local atmospheric metal pollution triggered by the earliest phases of mining/metallurgy in the area, and reconcile paleo-environmental and

Upper limit for magnetoresistance in silicon bronze and phosphor bronze wire

Science.gov (United States)

Feldman, R.; Talley, L.; Rojeski, M.; Vold, T.; Woollam, J. A.

1977-01-01

The electrical resistivity of silicon bronze and phosphor bronze was measured in magnetic fields from 0 to 14 T and at temperatures between 2 and 300 K. At any fixed temperature, the change in resistivity to 14 T was less than a few parts in 100,000. Thus, these bronzes are excellent for use in high magnetic fields where constant resistance is required. Welding leads to the sample was found to be superior to soldering. The soldered contacts were subject to spurious resistivity changes that resulted from superconducting transitions in the solder.

Neutron activation analysis of Lerna ceramics (Greece) at Early Bronze Age: local production and trade exchanges

International Nuclear Information System (INIS)

Attas, M.

1980-01-01

Neutron activation analysis is a powerful tool for determining the provenance of ancient ceramics. A sophisticated analytical system for gamma-ray spectrometry, designed specifically for the chemical analysis of ceramics by thermal neutron activation, was used to determine the concentrations of twenty elements in samples of ancient pottery. The measurements were made relative to the standard pottery of Perlman and Asaro. The purpose of the work was to study the production of fine pottery at the settlement of Lerna, in the Argolid of Greece, during the Early Bronze Age (third millennium BC). About half of the 50 samples analysed formed the major compositional group, which was attributed to Lerna. It included, besides the majority of the samples from the second phase of the Early Bronze Age (Lerna III), several samples from the third phase (Lerna IV); that is, from levels immediately succeeding the great destruction which marks the end of the Lerna III settlement. A small number of objects forms a second group of local origin and includes 4 of the 5 clay sealings sampled. Among the archaeologically unusual objects, several could be attributed to Lerna, while others were characterized as imports [fr

Provenance Studies on Metal Artefacts of the Early Danish Bronze Age: Comparing lead isotope data with the archaeological evidence

DEFF Research Database (Denmark)

Nørgaard, Heide Wrobel; Vandkilde, Helle; Pernicka, Ernst

2017-01-01

As early as 2100 BCE, societies in the hotspot zone of Denmark and Scania began to use metal. However, this region has not exploited metal ores of their own; therefore the origin of the metal used is of key significance to understanding and modelling the cross-European interconnectivities that were...... established through the necessity of trading. The Nordic region was for the very first time fully dependent on one crucial exogenous resource. The related change within the political economy surely resulted in the establishment of the Nordic Bronze Age. However, little is known about the significance......, the extent and the direction of this metal trade. For the Bronze Age in northern Europe (NBA) two possible transport routes stand opposite each other; on the one hand a continental route that connected the Alps, Central Europe and the NBA; and on the other hand, a maritime route linking Mediterranean...

Late Bronze Age in Alcáçova de Santarém (Portugal

Directory of Open Access Journals (Sweden)

Arruda, Ana Margarida

2015-06-01

Full Text Available The field work that took place in the restaurant area in Jardim das Portas do Sol (Alcáçova de Santarém recovered well-preserved archaeological layers dated to the Late Bronze Age, lying directly underneath the Iron Age phase. The excavation made it possible to collect an important set of ceramics that incorporate printed and incised decoration, which can be easily decoration related to the Cogotas 1 cultural background. Burnished decorations, with grooves on the inner surface and outer strips, are less common. The formal repertoire does not deviate from what is known about the Late Bronze Age in central and southern Iberian Peninsula. The data allow us to propose a chronology centered in the early 1st millennium BCE for this occupation.Durante los trabajos de campo, realizados en el área del restaurante del Jardim das Portas do Sol, se documentaron, por primera vez en Alcáçova de Santarém, niveles conservados del final de la Edad del Bronce, inmediatamente infrapuestos a los de la Edad del Hierro. Su excavación permitió recoger un conjunto de materiales cerámicos que incorpora varios fragmentos decorados por impresión e incisión, que pueden ser fácilmente relacionados con el universo cultural de Cogotas 1. Las decoraciones bruñidas con surcos en la superficie interna y con franjas al exterior son mucho menos frecuentes. El repertorio formal no difiere del conocido para el Bronce Final del centro y sur de la Península Ibérica. Los datos permiten proponer una cronologia del inicio del 1 milenio a.n.e. (siglo IX para esta ocupación.

Agricultural production and stability of settlement systems in Upper Mesopotamia during the Early Bronze Age (third millennium BCE)

Science.gov (United States)

Kalayci, Tuna

This study investigates the relationship between rainfall variation and rain-fed agricultural production in Upper Mesopotamia with a specific focus on Early Bronze Age urban settlements. In return, the variation in production is used to explore stability of urban settlement systems. The organization of the flow of agricultural goods is the key to sustaining the total settlement system. The vulnerability of a settlement system increases due to the increased demand for more output from agricultural lands. This demand is the key for the success of urbanization project. However, without estimating how many foodstuffs were available at the end of a production cycle, further discussions on the forces that shaped and sustained urban settlement systems will be lacking. While large scale fluctuations in the flow of agricultural products between settlements are not the only determinants of hierarchical structures, the total available agricultural yield for each urban settlement in a hierarchy must have influenced settlement relations. As for the methodology, first, Early Bronze Age precipitation levels are estimated by using modern day associations between the eastern Mediterranean coastal areas and the inner regions of Upper Mesopotamia. Next, these levels are integrated into a remote-sensing based biological growth model. Also, a CORONA satellite imagery based archaeological survey is conducted in order to map the Early Bronze Age settlement system in its entirety as well as the ancient markers of agricultural intensification. Finally, ancient agricultural production landscapes are modeled in a GIS. The study takes a critical position towards the traditionally held assumption that large urban settlements (cities) in Upper Mesopotamia were in a state of constant demand for food. The results from this study also suggest that when variations in ancient precipitation levels are translated into the variations in production levels, the impact of climatic aridification on ancient

Early atmospheric metal pollution provides evidence for Chalcolithic/Bronze Age mining and metallurgy in Southwestern Europe

Energy Technology Data Exchange (ETDEWEB)

Martínez Cortizas, Antonio, E-mail: antonio.martinez.cortizas@usc.es [Departamento de Edafoloxía e Química Agrícola, Facultade de Bioloxía, Universidade de Santiago de Compostela, Campus Sur s/n, Santiago de Compostela (Spain); López-Merino, Lourdes, E-mail: lourdes.lopez-merino@brunel.ac.uk [Institute of Environment, Health and Societies, Brunel University London, UB8 3PH Uxbridge (United Kingdom); Bindler, Richard, E-mail: richard.bindler@umu.se [Department of Ecology and Environmental Science, Umeå University, Umeå (Sweden); Mighall, Tim, E-mail: t.mighall@abdn.ac.uk [Department of Geography & Environment, School of Geosciences, University of Aberdeen, Elphinstone Road, Aberdeen AB24 3UF (United Kingdom); Kylander, Malin E., E-mail: malin.kylander@geo.su.se [Department of Geological Sciences and the Bolin Centre for Climate Research, Stockholm University, SE-10691, Stockholm (Sweden)

2016-03-01

Although archaeological research suggests that mining/metallurgy already started in the Chalcolithic (3rd millennium BC), the earliest atmospheric metal pollution in SW Europe has thus far been dated to ~ 3500–3200 cal. yr. BP in paleo-environmental archives. A low intensity, non-extensive mining/metallurgy and the lack of appropriately located archives may be responsible for this mismatch. We have analysed the older section (> 2100 cal. yr. BP) of a peat record from La Molina (Asturias, Spain), a mire located in the proximity (35–100 km) of mines which were exploited in the Chalcolithic/Bronze Age, with the aim of assessing evidence of this early mining/metallurgy. Analyses included the determination of C as a proxy for organic matter content, lithogenic elements (Si, Al, Ti) as markers of mineral matter, and trace metals (Cr, Cu, Zn, Pb) and stable Pb isotopes as tracers of atmospheric metal pollution. From ~ 8000 to ~ 4980 cal. yr. BP the Pb composition is similar to that of the underlying sediments (Pb 15 ± 4 μg g{sup −1}; {sup 206}Pb/{sup 207}Pb 1.204 ± 0.002). A sustained period of low {sup 206}Pb/{sup 207}Pb ratios occurred from ~ 4980 to ~ 2470 cal. yr. BP, which can be divided into four phases: Chalcolithic (~ 4980–3700 cal. yr. BP), {sup 206}Pb/{sup 207}Pb ratios decline to 1.175 and Pb/Al ratios increase; Early Bronze Age (~ 3700–3500 cal. yr. BP), {sup 206}Pb/{sup 207}Pb increase to 1.192 and metal/Al ratios remain stable; Late Bronze Age (~ 3500–2800 cal. yr. BP), {sup 206}Pb/{sup 207}Pb decline to their lowest values (1.167) while Pb/Al and Zn/Al increase; and Early Iron Age (~ 2800–2470 cal. yr. BP), {sup 206}Pb/{sup 207}Pb increase to 1.186, most metal/Al ratios decrease but Zn/Al shows a peak. At the beginning of the Late Iron Age, {sup 206}Pb/{sup 207}Pb ratios and metal enrichments show a rapid return to pre-anthropogenic values. These results provide evidence of regional/local atmospheric metal pollution triggered by the

Las Lunas (Yuncler, Toledo. A Bronze Age hoard with metallic materials from the southern Iberian Meseta

Directory of Open Access Journals (Sweden)

Urbina Martínez, Dionisio

2010-06-01

Full Text Available Here we present the results of the preliminary study carried out on a new group of metallic materials of the Final Bronze Age, recovered at the end of 2008 in the archaeological excavations at the settlement of Las Lunas (Yuncler, Toledo, Spain. Its geographical situation far away from the main zones of distribution of this type of finds, the singularity of the materials, and the evidence of Atlantic and Mediterranean relations make these materials a remarkable sample for the study of the Final Bronze Age in the centre of the Iberian Peninsula.

Se exponen los resultados del primer estudio realizado sobre un nuevo conjunto de materiales metálicos del Bronce Final recuperado a finales de 2008 en las excavaciones arqueológicas del yacimiento de Las Lunas (Yuncler, Toledo, España. La localización geográfica del hallazgo, lejos de las principales zonas de dispersión conocidas para este tipo de conjuntos, la singularidad de los objetos que integra, y las relaciones atlánticas y mediterráneas que evidencian sus materiales, lo convierten en un ejemplo destacado para el estudio de este período en el centro de la Península Ibérica.

75 FR 14257 - Pricing for Bronze Medals

Science.gov (United States)

2010-03-24

... DEPARTMENT OF THE TREASURY United States Mint Pricing for Bronze Medals AGENCY: United States Mint, Department of the Treasury. ACTION: Notice. SUMMARY: The United States Mint is announcing the price of the 1\\5/16\\- inch bronze medals, 1\\1/2\\-inch bronze medals and three-inch bronze medals. Beginning March...

Evaluation of Anti-Wear Properties of Metalworking Fluids Enhanced with Halloysite Nanotubes

Directory of Open Access Journals (Sweden)

Laura Peña-Parás

2017-10-01

Full Text Available The study of nanoparticles as additives for metalworking fluids (MWFs with applications in the metal removal processes, or machining, has received increasing attention due to the possible enhancements on tribological properties. In this study, low-cost and environmentally friendly nanoparticle additives of halloysite clay nanotubes (HNTs were dispersed in metalworking fluids utilized for milling processes. Concentrations of 0.01, 0.05, 0.10 wt. % were incorporated into a mineral oil (MO and a semi-synthetic fluid (SF by ultrasonication. The anti-wear properties of metalworking nanofluids were characterized with a T-05 block-on-ring tribotester at a contact pressure of 0.5 GPa. Surface roughness of worn block materials was obtained with an optical 3D surface measurement system. Results showed that at a concentration of 0.10 wt. % HNTs block mass loss was lowered by 24% for the MO + HNTs nanofluids. For the SF + HNTs, a reduction of 63% and 32% in wear mass loss and coefficient of friction (COF, respectively, were found at the same concentration. The tribological enhancing mechanism for the applied contact pressure was proposed to be due to a reduction of the area of contact and nanoparticle sliding between surfaces with no HNT deposition, evidenced by energy dispersive spectrometry (EDS. Furthermore, surface roughness studies of worn blocks showed smoother surfaces with lower groove density with the addition of nanoparticle additives. The results of this study demonstrate that HNTs can improve the lubricity of metalworking cutting fluids used for machining processes, enhancing tool life and providing better surface finish of products.

Clay Corner: Recreating Chinese Bronze Vessels.

Science.gov (United States)

Gamble, Harriet

1998-01-01

Presents a lesson where students make faux Chinese bronze vessels through slab or coil clay construction after they learn about the history, function, and design of these vessels. Utilizes a variety of glaze finishes in order to give the vessels an aged look. Gives detailed guidelines for creating the vessels. (CMK)

Prehistoric contacts over the Straits of Gibraltar indicated by genetic analysis of Iberian Bronze Age cattle.

Science.gov (United States)

Anderung, Cecilia; Bouwman, Abigail; Persson, Per; Carretero, José Miguel; Ortega, Ana Isabel; Elburg, Rengert; Smith, Colin; Arsuaga, Juan Luis; Ellegren, Hans; Götherström, Anders

2005-06-14

The geographic situation of the Iberian Peninsula makes it a natural link between Europe and North Africa. However, it is a matter of debate to what extent African influences via the Straits Gibraltar have affected Iberia's prehistoric development. Because early African pastoralist communities were dedicated to cattle breeding, a possible means to detect prehistoric African-Iberian contacts might be to analyze the origin of cattle breeds on the Iberian Peninsula. Some contemporary Iberian cattle breeds show a mtDNA haplotype, T1, that is characteristic to African breeds, generally explained as being the result of the Muslim expansion of the 8th century A.D., and of modern imports. To test a possible earlier African influence, we analyzed mtDNA of Bronze Age cattle from the Portalón cave at the Atapuerca site in northern Spain. Although the majority of samples showed the haplotype T3 that dominates among European breeds of today, the T1 haplotype was found in one specimen radiocarbon dated 1800 calibrated years B.C. Accepting T1 as being of African origin, this result indicates prehistoric African-Iberian contacts and lends support to archaeological finds linking early African and Iberian cultures. We also found a wild ox haplotype in the Iberian Bronze Age sample, reflecting local hybridization or backcrossing or that aurochs were hunted by these farming cultures.

Life in the fast lane: Settled pastoralism in the Central Eurasian Steppe during the Middle Bronze Age.

Science.gov (United States)

Judd, Margaret A; Walker, Jessica L; Ventresca Miller, Alicia; Razhev, Dmitry; Epimakhov, Andrey V; Hanks, Bryan K

2018-04-19

We tested the hypothesis that the purported unstable climate in the South Urals region during the Middle Bronze Age (MBA) resulted in health instability and social stress as evidenced by skeletal response. The skeletal sample (n = 99) derived from Kamennyi Ambar 5 (KA-5), a MBA kurgan cemetery (2040-1730 cal. BCE, 2 sigma) associated with the Sintashta culture. Skeletal stress indicators assessed included cribra orbitalia, porotic hyperostosis, dental enamel hypoplasia, and tibia periosteal new bone growth. Dental disease (caries, abscess, calculus, and periodontitis) and trauma were scored. Results were compared to regional data from the nearby Samara Valley, spanning the Early to Late Bronze Age (EBA, LBA). Lesions were minimal for the KA-5 and MBA-LBA groups except for periodontitis and dental calculus. No unambiguous weapon injuries or injuries associated with violence were observed for the KA-5 group; few injuries occurred at other sites. Subadults (age. Skeletal stress markers and injuries were uncommon among the KA-5 and regional groups, but a MBA-LBA high subadult mortality indicates elevated frailty levels and inability to survive acute illnesses. Following an optimal weaning program, subadults were at risk for physiological insult and many succumbed. Only a small number of individuals attained biological maturity during the MBA, suggesting that a fast life history was an adaptive regional response to a less hospitable and perhaps unstable environment. © 2018 Wiley Periodicals, Inc.

Bronze rainbow hologram mirrors

Science.gov (United States)

Dawson, P.

2006-02-01

This project draws on holographic embossing techniques, ancient artistic conventions of bronze mirror design and modelling and casting processes to accomplish portraiture of reflection. Laser scanning, 3D computer graphics and holographic imaging are employed to enable a permanent 3D static holographic image to appear integrated with the real-time moving reflection of a viewer's face in a polished bronze disc. The disc and the figure which holds it (caryatid) are cast in bronze from a lost wax model, a technique which has been used for millennia to make personal mirrors. The Caryatid form of bronze mirror which went through many permutations in ancient Egyptian, Greece and Rome shows a plethora of expressive figure poses ranging from sleek nudes to highly embellished multifigure arrangements. The prototype of this series was made for Australian choreographer Graeme Murphy, Artistic Director of the Sydney Dance Company. Each subsequent mirror will be unique in figure and holographic imagery as arranged between artist and subject. Conceptually this project references both the modern experience of viewing mirrors retrieved from ancient tombs, which due to deterioration of the surface no longer reflect, and the functioning of Chinese Magic mirrors, which have the ability to project a predetermined image. Inspired by the metaphorical potential of these mirrors, which do not reflect the immediate reality of the viewer, this bronze hologram mirror series enables each viewer to reflect upon himself or herself observing simultaneously the holographic image and their own partially obliterated reflection.

Two new hoards and several solitary finds of metal items of the Bronze Age - Early Hallstatt periods in the territory of Republic of Moldova

Directory of Open Access Journals (Sweden)

Stanislav Ţerna

2013-12-01

Full Text Available The article publishes two new hoards and several solitary finds of bronze items from the Prut-Dniester interfluve. These finds can be dated the late Bronze Age and Early Hallstatt periods and relate to the Sabatinovka and Noua cultures, as well as to different early Hallstatt groups. Of special interest is the hoard from Brăneşti containing some types of items which until now were not known on the territories to the west from the Dniester. Also, remarkable is the structure of these two hoards, which may indicate a votive character of their deposition.

Bronzes and relative compounds

International Nuclear Information System (INIS)

Uehlls, A.

1987-01-01

Preparation and the crystal structure of bronzes based on complex oxides of transition (Ti, V, Nb, Ta, Mo, W, Re, Ru and etc.) and alkali metals, as well as oxides of some other elements (Sr, In, La and etc.) are described. Peculiarities of formation of the structure of tetragonal, tungsten, molybdenum, vanadium bronzes and their analogs depending on the chemical composition of these compounds are considered

Textile production in the Bronze Age: an assemblage of splindes or bobbins of yarn from the site of Terlinques (Villena, Alicante

Directory of Open Access Journals (Sweden)

Jover Maestre, Francisco Javier

2001-06-01

Full Text Available The archeological field work on the Bronze Age site of Terlinques (Villena, Alicante has given an exceptional sample of spindles or bobbins of rush fibre of yarn in a room destroyed by a violent fire. A meticulous study of these special objects and their process of analysis and restoration yields new perspectives on knowledge in first stages of textile production during Bronze Age in Eastern Spain.

Los trabajos arqueológicos que se llevan a cabo en el yacimiento de la Edad del Bronce de Terlinques (Villena, Alicante han proporcionado un excepcional conjunto de husos o bobinas de hilo de junco. Éstos se hallaban almacenados en el interior de una habitación destruida por un violento incendio. El detenido estudio de estos singulares objetos y su proceso de análisis y restauración nos permite aproximamos, desde nuevas perspectivas, al conocimiento de la producción textil en las etapas iniciales de la Edad del Bronce en el Levante de la Península Ibérica.

Necropolis on Bor lake: New reports on Bronze age burial

Directory of Open Access Journals (Sweden)

Kapuran Aleksandar

2011-01-01

Full Text Available This article deals with the social and anthropological aspects of burial rituals during the Middle Bronze Age in Timočka Krajina. Decades of systematic research of necropolises and reconnaissance in the basin of the Crni Timok proved an increase in number of sites around ore - rich areas of the east Kučaj mountains as well as around Romuliana site and the fertile valleys of Džanovo polje (Map. 1. The quantitative increase in settlements was reflected by the emergence of large necropolises, only three of which have been systematically explored; those in Trnjani, Magura and Bor Lake (Fig. 1; Plan 1. Analysis of geographical features of many settlements and their position in relation to natural resources helped define two communities, one of which carried out mining and metallurgical activities, while the other group engaged in the production of food. Both groups lived in the immediate vicinity and mutual dependence, functioning within a developed market for copper production. During the exploration of the necropolis near Bor Lake in 1997, the remains of burnt skeletons were collected from burial structures 2/97 and 13/97 (Fig. 2; Plans 2 and 3. Anthropological analysis of the cremated remains of the deceased showed that high temperatures were used during the cremation process, which we assume could have only been achieved in metallurgical furnaces. This is confirmed by the fact that the skeletal fragments contain traces of melted metal, as well as finds of bronze slag inside urns and grave structures in the necropolis in Trnjani (Figs. 3 and 4; Tables 1-4. Burial ritual of this kind was not proved by systematic archaeological research of necropolises in the basin of Crni Timok, although anthropological data collected from necropolises linked to metallurgical settlements may indicate some guidelines in the ritual cremation of prominent members of these communities. [Projekat Ministarstva nauke Republike Srbije, br. 177020: Arheologija Srbije

Mongolian “Neolithic” and Early Bronze Age ground stone tools from the northern edge of the Gobi Desert

Directory of Open Access Journals (Sweden)

Joan S. Schneider

2016-10-01

Full Text Available The transition from the Mongolian Neolithic to the Bronze Age is not well understood. Within Ikh Nart Nature Reserve, over a period of five years, we identified a number of sites with dense surface artefact scatters and features that seem to represent this transition period. Evident in those concentrations are characteristic microblade cores, microblades, “thumbnail" flake scrapers, projectile points, ground stone tools, and stone features of unknown function. Between 2012 and 2014 we collected ground stone artefacts from four sites and sediment samples from three sites. With permission of Mongolian authorities, the artefacts from one site and sediment samples from three sites were sent for botanical analyses to the University of Texas, Austin, Environmental Archaeology Laboratory. Preliminary results indicate that plant remains are present on the ground stone artefacts: dendritic long-cells from a deep pore of one artefact and starch grains from the pores of six of the seven artefacts. These data present the first opportunity to understand what resources “Neolithic” people were processing with ground stone tools in this area and further our opportunity to better understand the little-known “Neolithic”-Early Bronze Age transition period in Central Asia. This paper describes the ground stone artefacts and further explores the results of data retrieved from some of these artefacts.

Positron lifetime in vanadium oxide bronzes

International Nuclear Information System (INIS)

Dryzek, J.; Dryzek, E.

2003-01-01

The positron lifetime (PL) and Doppler broadening (DB) of annihilation line measurements have been performed in vanadium oxide bronzes M x V 2 O 5 . The dependence of these annihilation characteristics on the kind and concentration of the metal M donor has been observed. In the PL spectrum only one lifetime component has been detected in all studied bronzes. The results indicate the positron localization in the structural tunnels present in the crystalline lattice of the vanadium oxide bronzes. (copyright 2003 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

Agro-pastoral diets in southern Italy from the Neolithic to the Bronze Age

DEFF Research Database (Denmark)

Arena, Fabiola; Mannino, Marcello; Philippsen, Bente

. In particular, this method of palaeodietary reconstruction allows us to establish the ecosystem of origin of foods (terrestrial, freshwater and/or marine) and the type of diet (vegetarian, omnivorous or carnivorous). Our analyses on 33 human and 12 faunal bone collagen extracts attest that the diets......The period from the Neolithic to the Bronze Age was a time of considerable socio-cultural and economic change, which affected human diets. To improve our understanding of dietary change in communities living in the south of Italy during this period, we have undertaken stable carbon and nitrogen......), Basilicata (Murgia Timone, Grotta Funeraria and Toppo d’Aguzzo) and Apulia (Ipogeo dei Bronzi). Carbon and nitrogen isotope analyses inform us mainly on the intake of dietary protein, although, in diets characterized by limited meat consumption, they also provide us with information on plant consumption...

The Study Of Metalworking Fluids Biodegradability By Indirect Measurement Of Bacterial Inoculum Respiration

Directory of Open Access Journals (Sweden)

Gerulová Kristína

2015-06-01

Full Text Available An apparatus for measuring biodegradability of metalworking fluids (MWFs was constructed according to (1, based on the Zahn-Wellens test which enables a continuous determination of CO2 production by the change in conductivity of absorption solution. Results obtained from the testing of 8 different MWFs by this modified method were compared to those obtained in standardized OECD 302 B. The comparison showed better description of bacterial inoculum activity in tested solution; lag phase was easy to indicate. Tested emulsion achieved the level of primary degradability 39.7 – 40.8 %, and semi-synthetics 19.1 – 43.5%. The samples of synthetics where the degradation level reached 43.9 - 58.6 % were identified as the most degradable metalworking fluids.

Thermochemical investigation of lithium-vanadium bronzes

International Nuclear Information System (INIS)

Filippova, S.E.; Kesler, Ya.A.; Tret'yakov, Yu.D.; Gordeev, I.V.

1979-01-01

A thermochemical investigation was carried out of lithium-vanadium bronzes. The enthalpies of solution and the standard enthalpies of formation of the bronzes β-Lisub(x)Vsub(2)Osub(5) were determined. Investigated was the dependence of the enthalpy of mixing bronzes on the composition; a linear character of the dependence evidences of negligibly small, as compared to the experimental error, energy variations of the matrix V 2 O 5 on introduction of lithium. The variation was calculated of the partial molar enthalpy of lithium in the formation of β-Lisub(x)Vsub(2)Osub(5)

The transmissional and functional context of the lexical lists from Ḫattuša and from the contemporaneous traditions in Late-Bronze-Age Syria

NARCIS (Netherlands)

Scheucher, Tobias Simon

2012-01-01

The study attempts to reconstruct aspects of the culture and knowledge transfer as involved in the import of cuneiform writing from Mesopotamia to Anatolia and Syria in the Late Bronze Age. It therefore analyzes the manuscripts called 'lexical lists' that were excavated at the Anatolian and Syrian

Granulation of Cu-Al-Fe-Ni Bronze

Directory of Open Access Journals (Sweden)

Pisarek B.P.

2014-08-01

Full Text Available With the increase in wall thickness of the casting of iron-nickel-aluminium-bronze, by the reduction of the cooling rate the size of κII phase precipitates increases. This process, in the case of complex aluminium bronzes with additions of Cr, Mo and W is increased. Crystallization of big κII phase, during slow cooling of the casting, reduces the concentration of additives introduced to the bronze matrix and hardness. Undertaken research to develop technology of thick-walled products (g> 6 mm of complex aluminium bronzes. Particular attention was paid to the metallurgy of granules. As a result, a large cooling speed of the alloy, and also high-speed solidification casting a light weight of the granules allows: to avoid micro-and macrosegregation, decreasing the particle size, increase the dispersion of phases in multiphase alloys. Depending on the size granules as possible is to provide finished products with a wall thickness greater than 6 mm by infiltration of liquid alloy of granules (composites. Preliminary studies was conducted using drip method granulate of CuAl10Fe5Ni5 bronze melted in a INDUTHERM-VC 500 D Vacuum Pressure Casting Machine. This bronze is a starting alloy for the preparation of the complex aluminium bronzes with additions of Cr, Mo, W and C or Si. Optimizations of granulation process was carried out. As the process control parameters taken a casting temperature t (°C and the path h (mm of free-fall of the metal droplets in the surrounding atmosphere before it is intensively cooled in a container of water. The granulate was subjected to a sieve analysis. For the objective function was assume maximize of the product of Um*n, the percentage weight “Um” and the quantity of granules ‘n’ in the mesh fraction. The maximum value of the ratio obtained for mesh fraction a sieve with a mesh aperture of 6.3 mm. In the intensively cooled granule of bronze was identified microstructure composed of phases: β and fine bainite

Chromaticity and Glossiness of Gold, Silver, and Bronze Colors

Directory of Open Access Journals (Sweden)

Tomohisa Matsumoto

2011-05-01

Full Text Available Appearance of metallic colors, such as gold, silver and bronze, depends on chromaticity and glossiness of a surface. We aim to obtain the chromaticity region of gold, silver, and bronze by using CG simulated surfaces with various glossiness. The physical glossiness was defined by the intensity ratio of specular reflectance of the surface stimulus. The observer estimated degree of perceived glossiness, and also degree of gold, silver, or bronze appearance of the stimulus with a physical glossiness and a chromaticity. The results showed that the stimulus began to appear gold, silver or bronze at a certain chromaticity point only when the stimulus had glossiness. The chromaticity range, where gold, silver and bronze colors were observed, expanded as the degree of glossiness increased. Furthermore the ratio of the degree of gold, silver or bronze colors to that of glossiness of the stimulus was found to be different among the chromaticity points of the stimulus. This ratio was highest with highly saturated stimuli for gold and bronze colors, and with achromatic stimuli for silver color.

Aproximación al Bronce Antiguo y Pleno en el sureste de la campiña cordobesa: los yacimientos del Cerro del Castillo de Aguilar y de Zoñar

OpenAIRE

Murillo Redondo, Juan Francisco; Ruiz Lara, María Dolores

1992-01-01

This paper analyses the Middle Bronze Age in lhe Middle Valle of Guadalquivir river by means of two archaelogical settlements in the province of Córdoba. They offer a distinctive material cullure -pottery, metalwork- and also an increasing influence from two of me most important cultural areas of Iberia. En este trabajo se presentan dos yacimientos arqueológicos que con una ocupación del Bronce Pleno, documentan una etapa que hasta el momento se había mostrado poco clara en el contexto gen...

A catastrophic event in Lake Geneva region during the Early Bronze Age?

Science.gov (United States)

Kremer, Katrina; Yrro, Blé; Marillier, François; Hilbe, Michael; Corboud, Pierre; Rachoud-Schneider, Anne-Marie; Girardclos, Stéphanie

2013-04-01

Similarly to steep oceanic continental margins, lake slopes can collapse, producing large sublacustrine landslides and tsunamis. Lake sediments are excellent natural archives of such mass movements and their study allows the reconstructions of these prehistoric events, such as the 563 AD large tsunami over Lake Geneva (Kremer et al, 2012). In Lake Geneva, more than 100 km of high-resolution seismic reflection profiles reveal the late Holocene sedimentation history. The seismic record shows a succession of five large lens-shaped seismic units (A to I), characterized by transparent/chaotic seismic facies with irregular lower boundaries, and interpreted as mass-movement deposits. These units are interbedded with parallel, continuous and strong amplitude reflections, interpreted as the 'background' lake sediments. The oldest dated mass movement (Unit D) covers a surface of 22 km2 in the deep basin, near the city of Lausanne. This deposit has an estimated minimum volume of 0.18 km3 and thus was very likely tsunamigenic (Kremer et al, 2012). A 12-m-long sediment core confirms the seismic interpretation of the mass movement unit and shows that the uppermost 3 m of Unit D are characterized by deformed hemipelagic sediments topped by a 5 cm thick turbidite. This deposit can be classified as a slump whose scar can be interpreted in the seismic data and visualized by multibeam bathymetry. This slump of Lausanne was likely triggered by an earthquake but a spontaneous slope collapse cannot be excluded (Girardclos et al, 2007). Radiocarbon dating of plant macro-remains reveals that the unit D happened during Early Bronze Age. Three other mass wasting deposits occurred during the same time period and may have been triggered during the same event, either by a single earthquake or by a tsunami generated by the slump of Lausanne. Although the exact trigger mechanism of the all these mass-wasting deposits remains unknown, a tsunami likely generated by this event may have affected the

Gold and gold working in Late Bronze Age Northern Greece

Science.gov (United States)

Vavelidis, M.; Andreou, S.

2008-04-01

Numerous objects of gold displaying an impressive variety of types and manufacturing techniques are known from the Late Bronze Age (LBA) contexts of Mycenaean Greece, but very little is known about the origin and processing of gold during the second millennium b.c. Ancient literature and recent research indicate that northern Greece is probably the richest gold-bearing region in Greece, and yet, very little evidence exists regarding the exploitation of its deposits and the production as well as use of gold in the area during prehistory. The unusual find of a group of small stone crucibles at the prehistoric settlement of Thessaloniki Toumba, one with visible traces of gold melting, proves local production and offers a rare opportunity to examine the process of on-site gold working. Furthermore, the comparison of the chemical composition of prehistoric artefacts from two settlements with those of gold deposits in their immediate areas supports the local extraction of gold and opens up the prospect for some of the Mycenaean gold to have originated in northern Greece. The scarcity of gold items in northern Greek LBA contexts may not represent the actual amount of gold produced and consumed, but could be a result of the local social attitudes towards the circulation and deposition of artefacts from precious metals.

Aarne Michaël Tallgren and the International Discussion on the Bronze Age of Russia

Directory of Open Access Journals (Sweden)

Timo Salminen

2017-04-01

Full Text Available This paper is on international scholarly discussion on the Bronze Age of Russia from 1908 until 1939, and in particular on the related role of the internationally renowned Finnish archaeologist Aarne Michaël Tallgren (1885–1945. How did a social network of researchers produce new interpretations and what were the key factors that distinguished the participants in the discussion? Was it a continuous process or a series of sudden changes? How did different ideological backgrounds influence the interpretations? In Western Europe, Tallgren’s most important interlocutors were Gero von Merhart, V Gordon Childe and Ellis H Minns, and in Russia V A Gorodcov and A A Spicyn. The paper is mainly based on correspondence between Tallgren and his colleagues.

The Bronze Age in the Northwestern of Iberian Peninsula: an analysis from funerary practices

Directory of Open Access Journals (Sweden)

Bettencourt, Ana M. S.

2010-06-01

Full Text Available From the analysis of the funerary practices and of their integration in the different chronological-cultural contexts where they develop, the author works out a new interpretation of the mechanism of negotiation of power and the promotion of social identity through the Bronze Age of the NW Iberian Peninsula. When studying an area so wide she distinguishes two great trends in the type and distribution of the funerary architectures throughout the Bronze Age that she associates with different ways of interaction with, and perception of, the world. Thus, she argues that the necropolises of “cloudy” tombs (cists without tumuli, plain graves and pits, located in areas of great agricultural potential and close to the settlements, may have been constructed by sedentary communities, very involved in agricultural activities, with a great sense of territoriality and a great control over, and deep knowledge of, the territory. On the other hand the communities involved with mountain landscapes, eventually more related to cattle and with ways of life that would imply greater mobility, were responsible for the construction of more visible funerary structures, such as small tumuli of megalithic tradition, located away from the settlements. In relation to the social role of the corpse, the author argues for the Early Bronze Age, that, the occupation of new territories, the emergence of a new form of community interaction with the environment and the emergence of new mechanisms of power and legitimacy of the territory were materialized in burial practices and in the social role of some corpses, in copper and gold grave goods. This social role was represented in old and new places. From the Middle Bronze Age she assumes that the corpse loses importance in collective terms and that death becomes more familiar. The new settings of power negotiation and social identity are transferred to other contexts of action more connected with the sphere of the living

Barrow of the Copper and Bronze Ages near the Village of Suvorovo, Odessa County

Directory of Open Access Journals (Sweden)

Nicolae Russev

2013-12-01

Full Text Available The article considers materials from a barrow excavated in 1995-1997 in the vicinity of the village of Suvorovo in the tract of Kale (Izmail District, Odessa County. Five graves and some stone and earth structures were uncovered in the barrow. The most ancient grave 5 and perhaps also grave 4 are related to the local variant of the Cernavodă I culture which is dated to the Late Copper Age (the first half of the 4th mill. BC. A ditch with two passages, remains of a cromlech and separately deposited painted vessel of the Cucuteni culture have been connected with grave 5. Grave 3 with bone hook-shaped pendant, paste beads and flint arrow head occupies in stratigraphic sequence later position and according to its features can be attributed to the Early Bronze Age I period or Usatovo culture time (the second half of the 4th mill. BC. Two other graves 1 and 2 with clay vessels belong to the Pit-Grave culture of the 3rd mill. BC.

Geoarchaeological research on Bronze Age settlement mounds in the Kolkheti lowlands at the Black Sea coast of Georgia

Science.gov (United States)

Laermanns, Hannes; Heisterkamp, Arne; Kirkitadze, Giorgi; Elashvili, Mikheil; Verheul, Jan; Kelterbaum, Daniel; Helmut, Brückner

2016-04-01

0.0.1 Situated between the Rivers Enguri in the north and Khobistsqali in the south, more than 20 settlement mounds (local name Dikhagudzuba), identified by field survey and remote sensing techniques, give evidence of a densely populated landscape in the coastal lowlands of eastern Georgia during the Bronze Age. While the existing chronology of these mounds is based on ceramic evidence obtained during a previous archaeological research, only limited information is available on their internal architecture and their palaeoenvironmental context, and the chronology of the different layers is as yet lacking. 0.0.2 Within the framework of a geoarchaeological research project, we carried out eleven vibracores on and in direct vicinity of three of the most prominent mounds, situated close to the villages of Orulu and Ergeta. Based on these sediment cores, our study aims at (i) establishing a chronostratigraphical framework for the settlements based on radiocarbon dating; (ii) reconstructing possible phases and gaps of occupation; and (iii) identifying the environmental conditions during the time of their existence. Geochemical and sedimentological analyses were carried out to decipher element contents (XRF), granulometry, and organic contents (LOI, C/N) of sediment samples, supporting the interpretation of the mounds' stratigraphical evolution and related human occupation. The three investigated settlement mounds are similar in dimension and stratigraphy, and different settlement layers could be identified in each of them. The 14C age estimates indicate that their formation occurred during the second half of the 3rd and the first half of the 2nd millennium BC, thus confirming the archaeological interpretation of their Bronze Age origin. Based on the granulometric and geochemical data, palaeoenvironmental conditions in the vicinity of the settlements were dominated by fluvial processes.

Corrosion investigation of fire-gilded bronze involving high surface resolution spectroscopic imaging

International Nuclear Information System (INIS)

Masi, G.; Chiavari, C.; Avila, J.; Esvan, J.; Raffo, S.; Bignozzi, M.C.; Asensio, M.C.; Robbiola, L.

2016-01-01

Graphical abstract: - Highlights: • Fire-gilded bronze prepared by ancient methods (Au–Hg layer on Cu–Sn–Zn–Pb–Sb). • Heating during gilding induces Sn and Znenrichment in the top part of the gilded layer. • SR-HRPES mapping of corrosion craters (cross-section) after accelerated ageing. • Selective dissolution of Cu and Zn in the craters induces Sn species enrichment. • The main species in the craters are related to hydroxi-oxide compounds. - Abstract: Gilded bronzes are often affected by severe corrosion, due to defects in the Au layer and Au/Cu alloy galvanic coupling, stimulated by large cathodic area of the gilded layer. Galvanic corrosion, triggered by gilding defects, leads to products growth at the Au/bronze interface, inducing blistering or break-up of the Au layer. In this context, fire-gilded bronze replicas prepared by ancient methods (use of spreadable Au–Hg paste) was specifically characterised by compiling complementary spectroscopic and imaging information before/after accelerated ageing with synthetic rain. Fire-gilded bronze samples were chemically imaged in cross-section at nano-metric scale (<200 nm) using high energy and lateral resolution synchrotron radiation photoemission (HR-SRPES) of core levels and valence band after conventional characterisation of the samples by Glow Discharge optical Emission Spectroscopy (GD-OES) and conventional X-ray photoelectron spectroscopy (XPS). We have found a net surface enrichment in Zn and Sn after fire-gilding and presence of metallic Hg, Pb and Cu within the Au layer. Moreover, the composition distribution of the elements together with their oxidation has been determined. It was also revealed that metallic phases including Hg and Pb remain in the gilding after corrosion. Moreover, selective dissolution of Zn and Cu occurs in the crater due to galvanic coupling, which locally induces relative Sn species enrichment (decuprification). The feasibility advantages and disadvantages of

Corrosion investigation of fire-gilded bronze involving high surface resolution spectroscopic imaging

Energy Technology Data Exchange (ETDEWEB)

Masi, G., E-mail: giulia.masi5@unibo.it [Dipartimento di Ingegneria Civile, Chimica, Ambientale e dei Materiali, Università di Bologna, via Terracini 28, 40131 Bologna (Italy); Chiavari, C., E-mail: cristina.chiavari@unibo.it [Dipartimento di Ingegneria Civile, Chimica, Ambientale e dei Materiali, Università di Bologna, via Terracini 28, 40131 Bologna (Italy); C.I.R.I. (Centro Interdipartimentale Ricerca Industriale) Meccanica Avanzata e Materiali, Università di Bologna, Bologna, via Terracini 28, 40131 Bologna (Italy); Avila, J., E-mail: jose.avila@synchrotron-soleil.fr [Synchrotron SOLEIL, L’Orme des Merisiers, 91190 Saint-Aubin (France); Esvan, J., E-mail: jerome.esvan@ensiacet.fr [Centre Interuniversitaire de Recherche et d’Ingénierie des Matériaux, Université de Toulouse, 4 allée Emile Monso, 31030 Toulouse (France); Raffo, S., E-mail: simona.raffo2@unibo.it [Dipartimento di Chimica Industriale “Toso Montanari”, Università di Bologna, viale Risorgimento 4, 40136 Bologna (Italy); Bignozzi, M.C., E-mail: maria.bignozzi@unibo.it [Dipartimento di Ingegneria Civile, Chimica, Ambientale e dei Materiali, Università di Bologna, via Terracini 28, 40131 Bologna (Italy); Asensio, M.C., E-mail: maria-carmen.asensio@synchrotron-soleil.fr [Synchrotron SOLEIL, L’Orme des Merisiers, 91190 Saint-Aubin (France); Robbiola, L., E-mail: robbiola@univ-tlse2.fr [TRACES Lab (CNRS UMR5608), Université Toulouse Jean-Jaurès, 5, allées Antonio-Machado, 31058 Toulouse (France); and others

2016-03-15

Graphical abstract: - Highlights: • Fire-gilded bronze prepared by ancient methods (Au–Hg layer on Cu–Sn–Zn–Pb–Sb). • Heating during gilding induces Sn and Znenrichment in the top part of the gilded layer. • SR-HRPES mapping of corrosion craters (cross-section) after accelerated ageing. • Selective dissolution of Cu and Zn in the craters induces Sn species enrichment. • The main species in the craters are related to hydroxi-oxide compounds. - Abstract: Gilded bronzes are often affected by severe corrosion, due to defects in the Au layer and Au/Cu alloy galvanic coupling, stimulated by large cathodic area of the gilded layer. Galvanic corrosion, triggered by gilding defects, leads to products growth at the Au/bronze interface, inducing blistering or break-up of the Au layer. In this context, fire-gilded bronze replicas prepared by ancient methods (use of spreadable Au–Hg paste) was specifically characterised by compiling complementary spectroscopic and imaging information before/after accelerated ageing with synthetic rain. Fire-gilded bronze samples were chemically imaged in cross-section at nano-metric scale (<200 nm) using high energy and lateral resolution synchrotron radiation photoemission (HR-SRPES) of core levels and valence band after conventional characterisation of the samples by Glow Discharge optical Emission Spectroscopy (GD-OES) and conventional X-ray photoelectron spectroscopy (XPS). We have found a net surface enrichment in Zn and Sn after fire-gilding and presence of metallic Hg, Pb and Cu within the Au layer. Moreover, the composition distribution of the elements together with their oxidation has been determined. It was also revealed that metallic phases including Hg and Pb remain in the gilding after corrosion. Moreover, selective dissolution of Zn and Cu occurs in the crater due to galvanic coupling, which locally induces relative Sn species enrichment (decuprification). The feasibility advantages and disadvantages of

Corrosion evaluation of traditional and new bronzes for artistic castings

International Nuclear Information System (INIS)

Chiavari, C.; Colledan, A.; Frignani, A.; Brunoro, G.

2006-01-01

By electrochemical and accelerated weathering tests, the corrosion behaviour of a new type of tin-bronze, containing about 3 wt.% silicon (SI3 bronze) was compared to a traditional 5% Sn, 5% Zn, 5% Pb bronze used for artistic castings (G85 bronze) under conditions simulating urban-industrial and marine environments. The aggressive media were: a synthetic pH 3.1 acid rain (AR) solution; a typical moist SO 2 -NO x for a climatic chamber and AR or 3.5% NaCl aqueous solution for salt spray cabinet. In all the environments the corrosion product layers formed on SI3 bronze were more uniform and protective than those formed on the traditional G85 bronze. The nature and morphology of the corrosion products were investigated by X-ray diffraction (XRD), optical and scanning electron microscopy with microprobe (SEM-EDS), atomic force microscopy (AFM)

Discrepancies in 14C dating as illustrated from the Egyptian new and middle kingdoms and from the Aegean bronze age and neolithic

International Nuclear Information System (INIS)

Hood, S.

1978-01-01

14 C dates available for the Middle and New Kingdoms in Egypt and for the Bronze Age and Neolithic in the Aegean are examined. The possibility is explored that calibrated dates vary from tree-ring dates by different margins in Egypt and the Aegean during the second millenium B.C. Apparent inconsistencies between 14 C dates from different Neolithic sites in the Aegean area are also noted. (author)

77 FR 14600 - Pricing for 2012 Kennedy Half-Dollar Bags and Rolls, Bronze Medals, the First Spouse Bronze Medal...

Science.gov (United States)

2012-03-12

... DEPARTMENT OF THE TREASURY United States Mint Pricing for 2012 Kennedy Half-Dollar Bags and Rolls, Bronze Medals, the First Spouse Bronze Medal Set and the Birth Set AGENCY: United States Mint, Department of the Treasury. ACTION: Notice. SUMMARY: The United States Mint is announcing 2012 pricing for...

Artefact biography 2.0 : the information value of corroded archaeological bronzes

NARCIS (Netherlands)

Nienhuis, J.

2017-01-01

The different phases in the life of archaeological objects can be described by artefact biography. This dissertation defines an updated version: artefact biography 2.0, and the life phases of Early Iron Age bronze studs from Oss-Zevenbergen, the Netherlands, are elaborated. Throughout the thesis,

Thermal and Electrical Conductivity Measurements of CDA 510 Phosphor Bronze

Science.gov (United States)

Tuttle, James E.; Canavan, Edgar; DiPirro, Michael

2009-01-01

Many cryogenic systems use electrical cables containing phosphor bronze wire. While phosphor bronze's electrical and thermal conductivity values have been published, there is significant variation among different phosphor bronze formulations. The James Webb Space Telescope (JWST) will use several phosphor bronze wire harnesses containing a specific formulation (CDA 510, annealed temper). The heat conducted into the JWST instrument stage is dominated by these harnesses, and approximately half of the harness conductance is due to the phosphor bronze wires. Since the JWST radiators are expected to just keep the instruments at their operating temperature with limited cooling margin, it is important to know the thermal conductivity of the actual alloy being used. We describe an experiment which measured the electrical and thermal conductivity of this material between 4 and 295 Kelvin.

Effect of tempering on corrosion resistance of cast aluminium bronzes

International Nuclear Information System (INIS)

Aaltonen, P.; Klemetti, K.; Haenninen, H.

1985-01-01

The subject of this study is corrosion resistance of aluminium bronzes, which are copper base alloys containing aluminium up to 12% with additions of nickel, iron and manganese. The main conclutions that can be drawn are: (1) The dealloying corrosion resistance of nickel-aluminium bronze is much better than that of aluminium bronze with iron and manganese additions, but it is not immune; (2) The dealloying corrosion resistance of aluminium bronzes can be improved by appropiate heat treatments. The best properties were obtained by temperering between 600 and 800 deg C, depending on the initial microstructure; (3) In crevice conditions, where local acidification can occur, dealloying of aluminium bronzes is a consequence of the preferential attack of aluminium-rich phases. By appropriate tempering, a uniform distribution of aluminium-rich phases is obtained and the continous path for selective corrosion is not formed

Proposal for the award of an industrial support contract for minor metalwork, metal fittings, cladding and roofing at CERN

CERN Document Server

2006-01-01

This document concerns the award of a contract for minor metalwork, metal fittings, cladding and roofing at CERN. The Finance Committee is invited to agree to the negotiation of a contract with the firm INIZIATIVE INDUSTRIALI SRL (IT), the lowest bidder, for the provision of minor metalwork, metal fittings, cladding and roofing at CERN for three years for a total amount not exceeding 1 467 895 euros (2 258 301 Swiss francs), not subject to revision for two years. The contract will include options for two one-year extensions beyond the initial three-year period.

Origin of the mysterious Yin-Shang bronzes in China indicated by lead isotopes.

Science.gov (United States)

Sun, Wei-dong; Zhang, Li-peng; Guo, Jia; Li, Cong-ying; Jiang, Yu-hang; Zartman, Robert E; Zhang, Zhao-feng

2016-03-18

Fine Yin-Shang bronzes containing lead with puzzlingly highly radiogenic isotopic compositions appeared suddenly in the alluvial plain of the Yellow River around 1400 BC. The Tongkuangyu copper deposit in central China is known to have lead isotopic compositions even more radiogenic and scattered than those of the Yin-Shang bronzes. Most of the Yin-Shang bronzes are tin-copper alloys with high lead contents. The low lead and tin concentrations, together with the less radiogenic lead isotopes of bronzes in an ancient smelting site nearby, however, exclude Tongkuangyu as the sole supplier of the Yin-Shang bronzes. Interestingly, tin ingots/prills and bronzes found in Africa also have highly radiogenic lead isotopes, but it remains mysterious as to how such African bronzes may have been transported to China. Nevertheless, these African bronzes are the only bronzes outside China so far reported that have lead isotopes similar to those of the Yin-Shang bronzes. All these radiogenic lead isotopes plot along ~2.0-2.5 Ga isochron lines, implying that deposits around Archean cratons are the most likely candidates for the sources. African cratons along the Nile and even micro-cratons in the Sahara desert may have similar lead signatures. These places were probably accessible by ancient civilizations, and thus are the most favorable suppliers of the bronzes.

X-ray Photoelectron Spectroscopy as a tool to investigate silane-based coatings for the protection of outdoor bronze: The role of alloying elements

Science.gov (United States)

Masi, G.; Balbo, A.; Esvan, J.; Monticelli, C.; Avila, J.; Robbiola, L.; Bernardi, E.; Bignozzi, M. C.; Asensio, M. C.; Martini, C.; Chiavari, C.

2018-03-01

Application of a protective coating is the most widely used conservation treatment for outdoor bronzes (cast Cu-Sn-Zn-Pb-Sb alloys). However, improving coating protectiveness requires detailed knowledge of the coating/substrate chemical bonding. This is particularly the case for 3-mercapto-propyl-trimethoxy-silane (PropS-SH) applied on bronze, exhibiting a good protective behaviour in outdoor simulated conditions. The present work deals with X-Ray Photoelectron Spectroscopy (XPS) and Electron Microscopy (FEG-SEM + FIB (Focused Ion Beam)) characterization of a thin PropS-SH film on bronze. In particular, in order to better understand the influence of alloying elements on coating performance, PropS-SH was studied first on pure Cu and Sn substrates then on bronzes with increasing alloy additions: Cu8Sn as well as a quinary Cu-Sn-Zn-Pb-Sb bronze. Moreover, considering the real application of this coating on historical bronze substrates, previously artificially aged ("patinated") bronze samples were prepared and a comparison between bare and "patinated" quinary bronzes was performed. In the case of coated quinary bronze, the free surface of samples was analysed by High Resolution Photoelectron Spectroscopy using Synchrotron Radiation (HR-SRPES) at ANTARES (Synchrotron SOLEIL), which offers a higher energy and lateral resolution. By compiling complementary spectroscopic and imaging information, a deeper insight into the interactions between the protective coating and the bronze substrate was achieved.

Development of Cu-Be bronzes through powder metallurgy

International Nuclear Information System (INIS)

Abbas, M.

2012-01-01

Copper and copper alloys are the major group of commercial alloy. One of the important copper bronzes is Copper beryllium. This is unique among all engineering alloys. Copper beryllium alloy possesses the highest strength in all the copper base alloys. Development of copper beryllium alloy with powder metallurgy is challenging problem due to toxicity of beryllium dust. Purpose of this project to find out parameters by which copper beryllium with all unique properties should obtained. For this purpose efforts are put on development of alternative to copper beryllium system like copper-tin and copper-aluminum by powder metallurgy route. Different time of milling with uniaxial pressure of about 200 MPa and different sintering temperature according to phase diagram of alloy, with different soaking time is tried. Problems may occur like decrease in density after sintering, breaking of samples by Rockwell A, B and C indenters arid by hammering. Cold iso-static pressing at 300 MPa and sintering at above 900 degree C is used to develop copper beryllium alloy. As quenched samples are heat treated at 260 degree C, 315 degree C and 370 degree C with different soaking time of 30, 90 and 180 minutes to find out optimum time and temperature parameters. . It is observed that at aging at 260 degree C for 180 minutes, aging at 315 degree C for 180 minutes and aging at 370 degree C for 30 minutes produce optimum result. By observing these pellets by SEM, precipitates appeared in peak-aged alloy and bigger precipitates in over-aged alloy. Copper beryllium alloy developed through powder metallurgy has better prospects than other copper bronzes. (author)

Relative sea-level change in the central Cyclades (Greece) since the Early Bronze Age

Science.gov (United States)

Draganits, E.

2012-04-01

The Aegean is a focus of important cultural achievements in Europe since the Neolithic period. The resulting abundance of archaeological remains, many of them below sea-level represent an advantageous area for the study of local relative sea-level change. We have carried out detailed mapping of Despotiko Island (SW of Antiparos) and its surrounding. Despotiko is situated almost exactly in the center of the Cyclades (as defined nowadays), more so than Delos, and therefore is very well suited for sea-level studies of the Cyclades. This beneficial location, combined with a spacious and protected bay, additionally may explain its former importance as stepping-stone in the Aegean Sea. The island is uninhabited at present, but Early Bronze Age settlement sites and graveyards as well as a large Archaic sanctuary proof its former importance. The sanctuary is situated on a gently northeast dipping slope in the northeast part of Despotiko, in range of sight of the Órmos Despotiko. Since 1997 large parts of this important sanctuary have been excavated during several excavation campaigns. Tectonically, Despotiko, Antiparos and Paros, belong to the Attic-Cycladic Crystalline of the Central Hellenides, a stack of metamorphic tectonic nappes, mainly comprising variable types of gneiss, schist, marble and amphibolite, and tectonic slices of unmetamorphosed sediments on top, separated by low-angle normal faults from the metamorphic units below. Submerged archaeological structures at the sea bottom of the Órmos Despotiko, a Classical marble inscription from the sanctuary and partly submerged agriculture trenches at the east coast Despotiko, indicate that the relative sea-level in this area was some 3 m lower during the Early Bronze Age and still more than 1 m lower during Classical time. These values of relative sea-level rise indicate a subsidence component additional to the global sea-level rise in the investigated time period. Neglecting possible vertical tectonic movements and

Setup of Galvanic Sensors for the Monitoring of Gilded Bronzes

Directory of Open Access Journals (Sweden)

Sara Goidanich

2014-04-01

Full Text Available Traditional electrochemical techniques, such as linear polarization resistance (Rp, and electrochemical impedance spectroscopy (EIS, cannot be applied to gilded bronzes, as it may not be possible to interpret the results obtained due to the bimetallic nature of the studied material. The measurement of the macrocouple current generated by the gold/bronze galvanic couple can be used as an indicator of degradation processes. Nevertheless, this measurement cannot be performed directly on the original artifacts due to the systematic presence of short-circuits between the two metals. In the present work the use of galvanic sensors is proposed as a possible solution for the monitoring of gilded bronze artefacts. The sensors have been designed to simulate real gilded bronze surfaces in terms of composition and stratigraphy and have proved to be a reliable diagnostic tool for the in situ monitoring of the rates of deterioration of gilded bronze surfaces and to test new conservation treatments. Their set-up and application is reported and their performances discussed.

Like a pig out of water: seaborne spread of domestic pigs in Southern Italy and Sardinia during the Bronze and Iron Ages.

Science.gov (United States)

Lega, C; Fulgione, D; Genovese, A; Rook, L; Masseti, M; Meiri, M; Cinzia Marra, A; Carotenuto, F; Raia, P

2017-02-01

Southern Italy has a long history of human occupation and passage of different cultures since the Early Holocene. Repeated, ancient introductions of pigs in several geographic areas in Europe make it difficult to understand pig translocation and domestication in Italy. The archeozoological record may provide fundamental information on this, hence shedding light on peopling and on trading among different ancient cultures in the Mediterranean. Yet, because of the scanty nature of the fossil record, ancient remains from human-associated animals are somewhat rare. Fortunately, ancient DNA analysis as applied to domestic species proved to be a powerful tool in revealing human migrations. Herein, we analyzed 80-bp fragment of mitochondrial DNA control region from 27 Sus scrofa ancient samples retrieved from Southern Italian and Sardinian archeological sites, spanning in age from the Mesolithic to the Roman period. Our results surprisingly indicate the presence of the Near Eastern haplotype Y1 on both Italy's major islands (Sardinia and Sicily) during the Bronze Age, suggesting the seaborne transportation of domestic pigs by humans at least during 1600-1300 BC. The presence of the Italian E2 clade in domestic contexts shows that the indigenous wild boar was effectively domesticated or incorporated into domestic stocks in Southern Italy during the Bronze Age, although the E2 haplotype has never been found in modern domestic breeds. Pigs belonging to the endemic E2 clade were thus traded between the Peninsula and Sardinia by the end of the second millennium BC and this genetic signature is still detected in Sardinian feral pigs.

High-resolution angle-resolved photoemission investigation of potassium and phosphate tungsten bronzes

International Nuclear Information System (INIS)

Paul, Sanhita; Kumari, Spriha; Raj, Satyabrata

2016-01-01

Highlights: • Electronic structure of potassium and phosphate tungsten bronzes. • Origin of transport anomalies in bronzes. • Flat segments of Fermi surfaces are connected by a nesting vector, q. • Nesting driven charge-density wave is responsible for the anomalies. - Abstract: We have performed high-resolution angle-resolved photoemission spectroscopy (ARPES) and density functional ab initio theoretical calculation to study the electronic structure of potassium (K_0_._2_5WO_3) and phosphate (P_4W_1_2O_4_4) tungsten bronzes. We have experimentally determined the band dispersions and Fermi surface topology of these bronzes and compared with our theoretical calculations and a fair agreement has been seen between them. Our experimental as well as theoretical investigation elucidates the origin of transport anomalies in these bronzes. The Fermi surfaces of these bronzes consist of flat patches, which can be connected with each other by a constant nesting wave vector, q. The scattering wave vectors found from diffraction measurements match with these nesting vectors and the anomalies in the transport properties of these bronzes can be well explained by the evolution of charge-density wave with a partial nesting between the flat segments of the Fermi surfaces.

Particular ceramic forms in the central Balkan and northern shores of the Aegean sea in the late bronze age

Directory of Open Access Journals (Sweden)

Bulatović Aleksandar

2011-01-01

Full Text Available This paper deals with the appearance and development of particular ceramic forms that were prevalent on the wider territory from the lower Danube to the northern shores of the Aegean sea during the middle and Late Bronze Age. These forms relate to globular beakers, pear shaped vessels with everted rims with arch shaped handles, cups with handles with plastic applications on their upper surface, etc. Particular attention is devoted to the phenomenon of globular beakers of the LBA in the valleys of Varder, Mesta and Struma rivers. All information collected primarily through analysis of stylistic-typological characteristics of ceramics of the middle and Late Bronze Age - that took into account ritual burials, layout of settlements, trade routes and climactic conditions during that period - points to population movements from the north to the south already by the LBA, i.e. in 15th century BC. These movements contributed to the creation of particular cultural groups in the LBA in the central Balkans, such as the Brnjica cultural group. However, these movements cannot be clearly linked to the so-called Aegean Migration, and for this reason their character and chronology are subject to debate. Ultimately it can be concluded that beakers of the Zimnicea -Cherkovna-Plovdiv type appeared in the late Bronze Age in the Vlasine depression and the Danube valley through the evolution of beaker forms of cultural groups of earlier periods. Almost contemporaneously, during LBA, a variant of this ceramic form, richly ornamented (mostly with spirals and similar in manner to the cultural group Dubovac-Žuto Brdo-Grla Mare- Krna, appeared in the LBA culture in northern Greece. Clearly this stylistic mannerism, with spirals as characteristic elements, spread relatively quickly through successive migrations in the period of 15th-14th century BC, toward the south of the Balkan Peninsula, thus covering the wider territory from the southern tip of the Carpathian mountains

Manufacturing method of the bronze metallic filters

International Nuclear Information System (INIS)

Krivij, N.; Suwardjo, W.; Garcia, L.; Cores, A.; Formoso, A.

1997-01-01

Granulated (spherical) powders of bronze have been produced by spraying molten metal with gas at high pressure in the experimental industrial installation belonging to the Metallurgical Research Centre (CIME) in Havana City. A physical-chemical and technological characterisation of the spherical bronze powder has been carried out and the optimum parameters have been determined from these powders. The mechanical properties of these filters can satisfactorily rival in applications such as in motor transport goods, in industry and agriculture. (AUthor)

Rapid climate change did not cause population collapse at the end of the European Bronze Age.

Science.gov (United States)

Armit, Ian; Swindles, Graeme T; Becker, Katharina; Plunkett, Gill; Blaauw, Maarten

2014-12-02

The impact of rapid climate change on contemporary human populations is of global concern. To contextualize our understanding of human responses to rapid climate change it is necessary to examine the archeological record during past climate transitions. One episode of abrupt climate change has been correlated with societal collapse at the end of the northwestern European Bronze Age. We apply new methods to interrogate archeological and paleoclimate data for this transition in Ireland at a higher level of precision than has previously been possible. We analyze archeological (14)C dates to demonstrate dramatic population collapse and present high-precision proxy climate data, analyzed through Bayesian methods, to provide evidence for a rapid climatic transition at ca. 750 calibrated years B.C. Our results demonstrate that this climatic downturn did not initiate population collapse and highlight the nondeterministic nature of human responses to past climate change.

Weaning practices among pastoralists: New evidence of infant feeding patterns from Bronze Age Eurasia.

Science.gov (United States)

Ventresca Miller, Alicia; Hanks, Bryan K; Judd, Margaret; Epimakhov, Andrey; Razhev, Dmitry

2017-03-01

This paper investigates infant feeding practices through stable carbon (δ 13 C) and nitrogen (δ 15 N) isotopic analyses of human bone collagen from Kamennyi Ambar 5, a Middle Bronze Age cemetery located in central Eurasia. The results presented are unique for the time period and region, as few cemeteries have been excavated to reveal a demographic cross-section of the population. Studies of weaning among pastoral societies are infrequent and this research adds to our knowledge of the timing, potential supplementary foods, and cessation of breastfeeding practices. Samples were collected from 41 subadults (Eurasia that were dependent on milk products as a supplementary food. Our discussion centers on supporting this hypothesis with modern information on central and east Eurasian herding societies including the age at which complementary foods are introduced, the types of complementary foods, and the timing of the cessation of breastfeeding. Integral to this work is the nature of pastoral economies and their dependence on animal products, the impact of complementary foods on nutrition and health, and how milk processing may have affected nutrition content and digestibility of foods. This research on Eurasian pastoralists provides insights into the complexities of weaning among prehistoric pastoral societies as well as the potential for different complementary foods to be incorporated into infant diets in the past. © 2016 Wiley Periodicals, Inc.

Assessment of the impulse noise attenuation by earplugs in metalworking processes

Directory of Open Access Journals (Sweden)

Rafał Młyński

2014-04-01

Full Text Available Background: The aim of the study was to answer the question of whether earplugs provide sufficient protection in the exposure to impulse noise generated during metalworking processes. Material and Methods: The noise generated by die forging hammer and punching machine was characterized. Using an acoustic test fixture, noise parameters (LCpeak, LAmax under 24 earplugs, foam, winged and no-roll, were measured. Octave band method was used to calculate values of LAeq under earplugs. Results: It was found that in the case of punching machine the exposure limit value of A-weighted noise exposure level, normalized to an 8-h working day (LEX,8h = 94.8 dB of noise present at the workstation, was exceeded, while in the case of die forging hammer both the exposure limit value of this parameter (LEX,8h = 108.3 dB and the exposure limit value of peak sound pressure level (LCpeak = 148.9 dB were exceeded. The assessment of noise parameters (LCpeak, LAmax, LAeq under earplugs revealed that the noise attenuation can be insufficient, sufficient, or too high. Conclusions: Earplugs can be suitable hearing protection devices in metalworking processes. Of the 24 earplugs included in this study, 9 provided appropriate noise attenuation in the case of tested die forging hammer and 10 in the case of tested punching machine. Med Pr 2014;65(2:197–207

Synchrotron X-ray diffraction and imaging of ancient Chinese bronzes

International Nuclear Information System (INIS)

Young, M.L.; Dunand, D.C.; Casadio, F.; Schnepp, S.; Almer, J.; Haeffner, D.R.

2006-01-01

High-energy synchrotron X-ray diffraction and imaging experiments were performed at the Advanced Photon Source on two ancient Chinese bronzes from the Art Institute of Chicago with the goal to nondestructively study their microstructure. The first object, a bronze fragment from an early Western Zhou dynasty vessel (Hu, 11th/10th century B.C.), was investigated with spatially-resolved diffraction to reveal the depth and composition of the surface corrosion layer as well as the composition and grain size of the underlying bronze core. The second object, a bronze dagger-axe (Ge, 3rd/2nd century B.C.) with a silver-inlaid sheath, was studied under both diffraction and imaging conditions. It was found to have been cast as a single object, answering longstanding scholars' questions on whether the ceremonial object concealed an interior blade. (orig.)

Prompt gamma-ray analysis of archaeological bronze

International Nuclear Information System (INIS)

Oura, Y.; Saito, A.; Sueki, K.; Nakahara, H.; Tomizawa, T.; Nishikawa, T.; Yonezawa, C.; Matsue, H.; Sawahata, H.

1999-01-01

Prompt γ-ray analysis using the internal monostandard method was applied to voluminous archaeological bronze mirrors produced in ancient China. Sn/Cu content ratios were determined nondestructively by this method. Furthermore, Au/Cu, As/Cu, and Sb/Cu content ratios were determined by means of measuring decay γ-rays emitted from radioactive nuclides produced within samples via (n,γ) reactions. It is clear that the Sn/Cu content ratios in bronze mirrors produced in the Sung era is smaller than in ones produced in between the Han and the Tung era. (author)

An important harvest by applying Pb-isotope analysis to ancient Chinese bronzes

International Nuclear Information System (INIS)

Jin Zhengyao

2003-01-01

Analysing numerous ancient Chinese bronze objects unearthed at the archaeological sites by lead isotopic method, we found that a major portion Shang (1600 B. C.-1100 B. C.) bronzes contained a kind of high-radiogenic lead, The results suggested that there is a 'bronze road' linking the Shang sites in both of the Yellow River valley and the Yangtze River valley in Shang dynasty. (authors)

Use of portable X-ray fluorescence instrument for bulk alloy analysis on low corroded indoor bronzes

International Nuclear Information System (INIS)

Šatović, D.; Desnica, V.; Fazinić, S.

2013-01-01

One of the most often used non-destructive methods for elemental analysis when performing field measurements on bronze sculptures is X-ray fluorescence (XRF) analysis based on portable instrumentation. However, when performing routine in-situ XRF analysis on corroded objects obtained results are sometimes considerably influenced by the corrosion surface products. In this work the suitability of portable XRF for bulk analysis of low corroded bronzes, which were initially precisely characterized using sophisticated and reliable laboratory methods, was investigated and some improvements in measuring technique and data processing were given. Artificially corroded bronze samples were analyzed by a portable XRF instrument using the same methodology and procedures as when performing in-situ analysis on real objects. The samples were first investigated using sophisticated complementary laboratory techniques: Scanning Electron Microscopy, Proton-Induced X-ray Emission Spectroscopy and Rutherford Backscattering Spectrometry, in order to gain precise information on the formation of the corrosion product layers and in-depth elemental profile of corrosion layers for different aging parameters. It has been shown that for corrosion layers of up to ca. 25 μm a portable XRF can yield very accurate quantification results. - Highlights: • XRF quantification is very accurate for bronze corrosion layers of up to ca. 25 μm. • Corrosion layer formation on bronze described in two phases. • Corrosion layers precisely characterized using PIXE, RBS and SEM. • Corrosion approximated as CuO for layer thickness calculations via X-ray attenuations • Increasingly lighter corrosion matrix may cause SnLα radiation intensity inversion

Use of portable X-ray fluorescence instrument for bulk alloy analysis on low corroded indoor bronzes

Energy Technology Data Exchange (ETDEWEB)

Šatović, D., E-mail: dsatovic@alu.hr [Department of Conservation and Restoration, Academy of Fine Arts, Ilica 85, 10000 Zagreb (Croatia); Desnica, V. [Department of Conservation and Restoration, Academy of Fine Arts, Ilica 85, 10000 Zagreb (Croatia); Fazinić, S. [Laboratory for Ion Beam Interactions, Ruđer Bošković Institute, Bijenička 54, 10000 Zagreb (Croatia)

2013-11-01

One of the most often used non-destructive methods for elemental analysis when performing field measurements on bronze sculptures is X-ray fluorescence (XRF) analysis based on portable instrumentation. However, when performing routine in-situ XRF analysis on corroded objects obtained results are sometimes considerably influenced by the corrosion surface products. In this work the suitability of portable XRF for bulk analysis of low corroded bronzes, which were initially precisely characterized using sophisticated and reliable laboratory methods, was investigated and some improvements in measuring technique and data processing were given. Artificially corroded bronze samples were analyzed by a portable XRF instrument using the same methodology and procedures as when performing in-situ analysis on real objects. The samples were first investigated using sophisticated complementary laboratory techniques: Scanning Electron Microscopy, Proton-Induced X-ray Emission Spectroscopy and Rutherford Backscattering Spectrometry, in order to gain precise information on the formation of the corrosion product layers and in-depth elemental profile of corrosion layers for different aging parameters. It has been shown that for corrosion layers of up to ca. 25 μm a portable XRF can yield very accurate quantification results. - Highlights: • XRF quantification is very accurate for bronze corrosion layers of up to ca. 25 μm. • Corrosion layer formation on bronze described in two phases. • Corrosion layers precisely characterized using PIXE, RBS and SEM. • Corrosion approximated as CuO for layer thickness calculations via X-ray attenuations • Increasingly lighter corrosion matrix may cause SnLα radiation intensity inversion.

Micro-EDXRF surface analyses of a bronze spear head: Lead content in metal and corrosion layers

International Nuclear Information System (INIS)

Figueiredo, E.; Valerio, P.; Araujo, M.F.; Senna-Martinez, J.C.

2007-01-01

A bronze spear head from Central Portugal dated to Late Bronze Age has been analyzed by non-destructive micro-EDXRF in the metal surface and corrosion layers. The artifact had previously been analyzed using a conventional EDXRF spectrometer having a larger incident beam. The quantification of the micro-EDXRF analyses showed that lead content in corrosion layers can reach values up to four times higher than the content determined in the metal surface. Results obtained with the higher energy incident beam from the EDXRF equipment, although referring mainly to the corrosion layers, seem to suffer some influence from the surface composition of the metallic alloy

Holes in teeth - Dental caries in Neolithic and Early Bronze Age populations in Central Germany.

Science.gov (United States)

Nicklisch, Nicole; Ganslmeier, Robert; Siebert, Angelina; Friederich, Susanne; Meller, Harald; Alt, Kurt W

2016-01-01

This study provides diachronic insight into the epidemiology of carious defects in teeth of Neolithic and Early Bronze Age populations in Central Germany over a period of 4000 years. The data were retrieved from skeletal remains uncovered at 21 sites throughout the Middle Elbe-Saale region (MES), comprising a total of 494 individuals with preserved teeth. The data generated were examined for age- and sex-related differences in order to gain information about the dietary habits and socio-economic structures of the period with the goal of identifying potential diachronic changes. The results indicated that dietary habits changed over the course of the Neolithic period: the prevalence of caries significantly decreased between the Early and Late Neolithic. The adults from the Early Neolithic sample, particularly those from the LBK bore the highest rate of caries. This highlights the essential importance of cereals in the diet of the early farmers in the Middle Elbe-Saale region. As time went on, meat and dairy products became more and more important, which had a positive impact on dental health. The data also show sex-specific differences: women were more often affected by caries than men and female jaws also generally exhibited greater numbers of carious teeth than their male counterparts. Dental health is a reflection of both biological factors and of economic and sociocultural structures. Copyright © 2015 Elsevier GmbH. All rights reserved.

Abrasive wear of BA1055 bronze with additives of Si, Cr, Mo and/or W

Directory of Open Access Journals (Sweden)

B. P. Pisarek

2008-10-01

Full Text Available Aluminium bronzes belong to the high-grade constructional materials applied on the put under strongly load pieces of machines, aboutgood sliding, resistant properties on corrosion both in the cast state how and after the thermal processing. It moves to them Cr and Si in the aim of the improvement of their usable proprieties. The additions Mo and/or W were not applied so far. It was worked out therefore the new kind of bronzes casting including these elements. Make additions to the Cu-Al-Fe-Ni bronze of Si, Cr, Mo and/or W in the rise of these properties makes possible. The investigations of the surface distribution of the concentration of elements in the microstructure of the studied bronze on X-ray microanalyzer were conducted. It results from conducted investigations, that in the aluminium bronze BA1055 after makes additions Si, Cr, Mo and/or W the phases of the type κFe, κNi crystallize, probably as complex silicides. Elements such as: Fe and Si dissolve first of all in phases κ, in smaller stage in the matrix of the bronze; Mn, Ni and W they dissolve in matrix and phases κ. It dissolves Cr and Mo in the larger stage in phases κ than in the matrix. The sizes of the abrasive wear were compared in the state cast multicomponentnew casting Cu-Al-Fe-Ni bronzes with the additives Cr, Mo or W with the wear of the bronze CuAl10Fe5Ni5Si. The investigations of thewear were conducted on the standard device. It results from conducted investigations, that make additions to bronze BA1055 of the additives of Si, Cr, Mo, and/or W it influences the rise of the hardness (HB of the bronze in the cast state, in the result of the enlarged quantity separates of hard phases κ, and in the consequence the decrease of the abrasive wear. The addition of molybdenum made possible obtainment of the microhardness of the phase α and γ 2 on the comparable level. From the microstructure of the bronze CuAl10Fe5Ni5MoSi is characterizes the smallest abrasive wear among

Evaluation of some phenothiazine derivatives as corrosion inhibitors for bronze in weakly acidic solution

International Nuclear Information System (INIS)

Bostan, Roxana; Varvara, Simona; Găină, Luiza; Mureşan, Liana Maria

2012-01-01

Highlights: ► Phenothiazine derivatives are efficient inhibitors for bronze corrosion. ► Potentiodynamic polarization and EIS were used to elucidate inhibition mechanism. ► Adsorption of phenothiazine derivatives on bronze surface obeys Langmuir isotherm. ► A correlation between energy gaps and inhibition efficiencies values was obtained. - Abstract: Four phenothiazine derivatives have been tested as inhibitors for bronze corrosion in a solution containing Na 2 SO 4 and NaHCO 3 (pH 5). Electrochemical investigations (potentiodynamic polarisation and impedance measurements) revealed that all phenothiazine derivatives exert a protective effect against bronze corrosion and, in some cases their inhibition efficiency exceeds 90% at concentration level as low as 75 μM. An adherent layer of organic molecules chemisorbed on bronze surface is responsible for the protective effect of the investigated compounds. Adsorption of phenothiazine derivatives on bronze obeys Langmuir isotherm. Correlation between quantum chemical calculations and inhibition efficiency of the investigated compounds was discussed using DFT method.

Non-destructive analysis of archaeological bronzes by nuclear techniques

International Nuclear Information System (INIS)

Respaldiza, M.A.; Gomez-Tubio, B.M.; Sanchez del Junco, A.; Barranco, F.; Saiz-Jimenez, C.

1994-01-01

This paper studies a method for overcoming the difficulty of corroded surfaces by means of nondestructive nuclear methods in the determination of the composition of archaeological bronzes. It consists of the combination of PIXE or XRF information with Gamma Ray Transmission (GRT) data. A wide range applicability of this combined method is established by comparison with profiles of concentrations along the bronzes' patina obtained by SEM-EDAX. (orig.)

The role of plants in the economy of Tell Arbid, north-east Syria, in the Post-Akkadian Period and Middle Bronze Age

Directory of Open Access Journals (Sweden)

Wasylikowa Krystyna

2013-12-01

Full Text Available Archaeological fieldwork carried out at the Tell Arbid site in north-eastern Syria exposed settlement remains dating from the early 3rd millennium BC to the mid 2nd millennium BC. Recent excavations in Sector P, on the eastern slope of the site, revealed the existence of a significant occupation of the Post-Akkadian/ Early Jazirah V period and of levels dated to the Early and Classic Khabur Ware/Old Jazirah/Middle Bronze Age I-II periods. Cereal remains were dominated by grains and ear fragments of hulled two-rowed barley Hordeum distichon. Less numerous were wheats represented by emmer Triticum dicoccon, einkorn T. monococcum, and macaroni wheat T. durum. The presence of bread wheat T. aestivum and six-rowed barley Hordeum vulgare could not be excluded. The two periods contained similar sets of cereals, but in the Post-Akkadian Period the percentage of hulled wheat remains was higher, while in the Middle Bronze Age (particularly in its younger phase naked wheat slightly exceeded hulled wheats. Legumes were represented by only very few seeds of lentil Lens culinaris and bitter vetch Vicia ervilia. Diaspores of wild plants were very abundant, particularly those from the families of grasses and legumes. The considerable number of ear and culm fragments probably belonging to cereals as well as numerous seeds/fruits of wild plants suggests that the plant remains originated from fodder or animal dung or belonged to threshing waste. The presence of grass stems with nodes indicated that cereals were reaped low on the straw; occasional use of uprooting was suggested by the occurrence of basal culm fragments with traces of rootlets.

Characterization of corroded bronze Ding from the Yin Ruins of China

International Nuclear Information System (INIS)

Ling, He; Qingrong, Zhao; Min, Gao

2007-01-01

This paper presents the result of scientific examinations carried out on the soil-buried archaeological bronzes Ding from Yin Ruins of China. Eight of typical fragments from different bronze Ding were selected as researched samples according to their deterioration characteristics. Optical microscopy (OM), scanning electron microscopy coupled with energy (SEM-EDX), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) were used to understand the corrosive morphological characteristics, to clear the nature of patina and to analyze the elementary composition of bronze Ding. The results indicated that it is not possible to distinguish the original lustrous metallic surface in most samples because of the corrosive crust. The substrate of bronze Ding contains74-86% Cu, 1.1-4.6% Pb, and 10-18% Sn, which is in agreement with the historical investigation in the ritual vessels of Shang time. Copper-containing compounds were the main constituents of natural patina: Cu 2 (OH) 3 Cl existed as corrosion product in all the powdery or crack surface; Cu 2 (OH) 2 CO 3 was the main corrosive product in a compact and hard corrosive surface. This study provides useful information for the restoration and protection of bronze Ding in Yin Ruins

Characterization of metallic surfaces in phosphorous-bronze ordered packings

International Nuclear Information System (INIS)

Sandru, Claudia; Titescu, Gh.

1997-01-01

Copper and its alloys, particularly the phosphorous bronze, are characterized by a high water wettability as compared with other materials. This feature led to utilization of phosphorous bronze in fabrication of contact elements, a packing type equipping the distillation columns. For heavy water separation by isotopic distillation under vacuum, ordered packings of phosphorous bronze networks were fabricated. The superior performances of these packings are determined by the material and also by the geometrical form and the state of the metallic surface. Thus, a procedure of evaluating the wettability has been developed, based on tests of the network material. The results of the tests constitute a criterion of rating the functional performances of packings, particularly of their efficiencies. Also, investigation techniques of the chemical composition and of the thickness of superficial layer on the packing were developed. It was found that the packing surface presents a layer of about 5-20 μm formed mainly by oxides of copper, tin, and, depending on the packing treatment, of oxides of other elements coming from the treatment agent. The paper presents characterization of phosphorous bronze treated with potassium permanganate, a specific treatment for improving the functional performances of the packings used in the heavy water concentration and re-concentration installations

Presentation of Andronovsky Costume in Museum Exposition (on materials from Lisakovsk burial mound of the Bronze Age

Directory of Open Access Journals (Sweden)

Usmanova Emma R.

2017-09-01

Full Text Available The article features an analysis of ancient weaving technologies and women's costume of the Andronovo culture dating back to the Bronze Age. It features a reconstruction of this costume executed by the author on the basis of the discovered remains of woven textile and headwear decoration discovered in burial grounds of Lisakovsk area in the first half of 2nd Millennium B.C. (Kazakhstan, Kostanay Region, Kisakovsk. The preservation of textile base allowed the author to experimentally produce copies of two women's headwear pieces and a vest. As a result, two types of braid adornments were discovrered among grave artifacts. The author substantiates several ideas related to the meaning of the signs and symbols on costume details. As a result of research, the author presents the semantics of headwear corresponding to Andronovo culture in the context of the symbolism of costumes belonging to the traditional peoples of Middle Eurasia.

A new find of macrofossils of feather grass (Stipa) in an Early Bronze Age storage pit at Vliněves, Czech Republic: local implications and possible interpretation in a Central European context

Czech Academy of Sciences Publication Activity Database

Bieniek, A.; Pokorný, Petr

2005-01-01

Roč. 14, č. 4 (2005), s. 295-302 ISSN 0939-6314 R&D Projects: GA ČR(CZ) GA206/00/D073 Institutional research plan: CEZ:AV0Z80020508 Keywords : Stipa * gathering * Neolithic * Bronze Age * Czech Republic * Poland Subject RIV: AC - Archeology, Anthropology, Ethnology Impact factor: 0.739, year: 2005

The employee satisfaction in metalworking manufacturing: How do organizational culture and organizational learning capacity jointly affect it?

Directory of Open Access Journals (Sweden)

Bulent Aydin

2008-12-01

Full Text Available It is a known fact that the organizations, which give more attention to the satisfaction of their employees, produce more successful outcomes than others do. In this sense, we have constructed an original model and carried out a research analysis in metalworking manufacturing, which the main subject is about to investigate the employee satisfaction depending on the factors of organizational culture and organizational learning capacity. The aim of the research is to contribute to academic researchers as well as managerial level and human resource department employees of metalworking organizations, in maximizing the employee satisfaction. The research was applied on 578 employees of the related industry. By the results, we have determined that the constructed model is significant and there is positive significant correlation both between -organizational culture and employee satisfaction- and -organizational learning capacity and employee satisfaction. Additionally, the total explained variance of employee satisfaction depending on these two variables has come out as the value of 0.56.

Electrochemical Multi-Coloration of Molybdenum Oxide Bronzes

International Nuclear Information System (INIS)

Lee, Sangmin; Saji, Viswanathan S.; Lee, Chiwoo

2013-01-01

We report a simple electrochemical approach in fabricating multiple colored molybdenum (Mo) oxide bronzes on the surface of a Mo-quartz electrode. A three step electrochemical batch process consisting of linear sweep voltammetry and anodic oxidation followed by cathodic reduction in neutral K 2 SO 4 electrolyte at different end potentials, viz. -0.62, -0.80 and -1.60 V (vs. Hg/HgSO 4 ) yielded red, blue and yellow colored bronzes. The samples produced were analyzed by XRD, EDS, and SIMS. The color variation was suggested to be associated with the cations intercalation into the oxide formed and the simultaneous structural changes that occurred during the cathodic reduction in neutral aqueous medium

Electrochemical Multi-Coloration of Molybdenum Oxide Bronzes

Energy Technology Data Exchange (ETDEWEB)

Lee, Sangmin; Saji, Viswanathan S.; Lee, Chiwoo [Korea Univ., Seoul (Korea, Republic of)

2013-08-15

We report a simple electrochemical approach in fabricating multiple colored molybdenum (Mo) oxide bronzes on the surface of a Mo-quartz electrode. A three step electrochemical batch process consisting of linear sweep voltammetry and anodic oxidation followed by cathodic reduction in neutral K{sub 2}SO{sub 4} electrolyte at different end potentials, viz. -0.62, -0.80 and -1.60 V (vs. Hg/HgSO{sub 4}) yielded red, blue and yellow colored bronzes. The samples produced were analyzed by XRD, EDS, and SIMS. The color variation was suggested to be associated with the cations intercalation into the oxide formed and the simultaneous structural changes that occurred during the cathodic reduction in neutral aqueous medium.

The bronze signum from Timacum Maius and its cultic attribution

Directory of Open Access Journals (Sweden)

Petrović Vladimir

2016-01-01

Full Text Available The bronze signum discussed in this paper was discovered by archaeological ex­cavation on the site of Timacum Maius in 2010. Found in the area of a luxurious Roman-period building, the artefact shows a tapering body with a central conical socket similar to a spearhead socket. It is one of the twenty-three known signa of the so-called classical-type. Most of them were found in the context of the cult of Jupiter Dolichenus, and we also presume the cultic purpose of the bronze signum from Timacum Maius. A similar find comes from Jupiter Dolichenus’ shrine in Egeta on the Danube limes with an inscription that connects it directly with the Dolichenian cult, and with the First Cohort of Cretans (Cohors I Cretum, the unit which had previously been stationed at Timacus Maius. The signum from Timacum Maius is most likely also connected with the cult of Jupiter Dolichenus and chronologically belongs to a period which is much earlier than the Severan age. [Projekat Ministarstva nauke Republike Srbije, 177012: Society, spiritual and material culture and communications in prehistory and early history of the Balkans

Propolis as a green corrosion inhibitor for bronze in weakly acidic solution

Science.gov (United States)

Varvara, Simona; Bostan, Roxana; Bobis, Otilia; Găină, Luiza; Popa, Florin; Mena, Vicente; Souto, Ricardo M.

2017-12-01

In the present work, the inhibitive action of natural propolis on bronze corrosion in a weakly acidic solution containing Na2SO4 and NaHCO3 at pH 5 was evaluated using multiscale electrochemical techniques, namely potentiodynamic polarization, electrochemical impedance spectroscopy and scanning vibrating electrode technique measurements. The major constituents of propolis were identified by HPLC. Surface characterization was performed by SEM-EDX and AFM analysis. Experiments were performed as a function of the propolis concentration and immersion time in the corrosive electrolyte. The obtained results showed that propolis presents good anticorrosive properties on bronze, acting as a mixed-type inhibitor, but its protective effectiveness is time-dependent. The highest inhibiting efficiency of 98.9% was obtained in the presence of 100 ppm propolis, after about 12 h of exposure to inhibitor-containing electrolyte through the stabilization of Cu2O on the bronze surface. The inhibitive properties of propolis on bronze corrosion are likely due to the adsorption of its main constituents (flavonoids and phenolic compounds), through the oxygen atoms in their functional groups and aromatic rings, which have been evidenced by FT-IR spectra. The adsorption of propolis on bronze was found to follow Langmuir adsorption isotherm.

Multielement analysis of archaic Chinese bronze and antique coins by fast neutron activation analysis

Energy Technology Data Exchange (ETDEWEB)

Tian, Y.H. (Academia Sinica, Lanzhou, Gansu (China). Inst. of Modern Physics); Pepelnik, R.; Fanger, H.U. (GKSS-Forschungszentrum Geesthacht GmbH, Geesthacht-Tesperhude (Germany, F.R.). Inst. fuer Physik)

1990-01-01

Samples of archaic bronze have been investigated by fast neutron activation analysis using both the absolute and relative method. The components Cu, Zn, Sn and Pb have been determined quantitatively. For the detection of lead via the short-lived isomeric state {sup 207m}Pb, cyclic activation and measurement technique was used with pneumatic sample transfer between detector and central irradiation position of the neutron tube. For non-destructive analysis of antique Chinese coins the samples had to be irradiated outside the neutron generator KORONA. The activation reactions, the evaluation of the elemental concentrations and the accuracy of the results are discussed. The data were corrected for {gamma}-ray self-absorption in the samples and summing of coincident {gamma}-rays in the detector. According to reported typical compositions of Chinese bronze from different dynasties, the age of the samples has been derived from the results obtained. (orig.).

Microstructure investigation of bronze/steel brazed joints proposed for HHF components of ITER manufacturing

Energy Technology Data Exchange (ETDEWEB)

Kalinin, G.M. [Research and Development Institute of Power Engineering, P.O. Box 788, Moscow 101000 (Russian Federation)], E-mail: gmk@nikiet.ru; Krestnikov, N.S. [Research and Development Institute of Power Engineering, P.O. Box 788, Moscow 101000 (Russian Federation); Jarovinskiy, Yu.L.; Makhin, I.D.; Nikolaev, V.V. [Rocket and Space Corporation ' Energia' , Korolev, Lenina Street 4-a, Moscow 141070 (Russian Federation); Skladnov, K.S.; Strebkov, Yu.S.; Zolotarev, V.B. [Research and Development Institute of Power Engineering, P.O. Box 788, Moscow 101000 (Russian Federation)

2008-12-15

Brazing is considered as one of the perspective option of high heat flux components of ITER manufacturing. CuCrZr bronze, austenitic steel AISI 321-type and PM-17-type (Ni-Mn-Fe-Si-Sn-B alloy) brazed material were used for the development of brazing technology. Two type of brazing have been studied within the framework of recent investigation: - Hot isostatic pressing (HIP)-assisted brazing. - Furnace-assisted brazing (with uniaxial compression loading). For the hydrostatic pressing (HIP) the brazed components were pressed out for about 175 MPa during 2.5 h at the temperature 1035-1040 deg. C. For the furnace-assisted brazing all components were inserted into the sealed can, vacuumed and heated up to brazing temperature {approx}950 deg. C. Fast cooling and ageing heat treatment (500 deg. C and 4 h) were applied to provide high strength of CuCrZr bronze. Microsections of specimens cut from the joints were studied by optical microscopy and by scanning electron microscopy (SEM). The microstructure, distribution of alloying elements of base metals and of brazed material components were studied in the joints. Results of these studies are discussed in this paper. The data shows that there is a potential for using more simple and cheap (in comparison with common HIP) technologies of bronze to steel joining with satisfactory quality.

Corrosion of Bronzes by Extended Wetting with Single versus Mixed Acidic Pollutants

Directory of Open Access Journals (Sweden)

Liliana Gianni

2014-04-01

Full Text Available The corrosion of bronzes was examined in the context of single-acid versus mixed-acid (as in urban acid rain solutions. Two bi-component bronzes (copper with either 3% Sn or 7% Sn that closely represent those of historic artifacts were immersed for five weeks in conditions designed to replicate those experienced by statues and ornaments in cities where rainfall and humidity constantly produce an electrolyte layer on the surfaces of bronzes. Ions, acids, and particles of pollutants can dissolve in this layer, resulting in a variety of harsh corrosion processes. The kinetics of corrosion and the properties of the resulting patinas were monitored weekly by electrochemical impedance spectroscopy and open-circuit potential measurements. The sizes and appearances of the corrosion products were monitored and used to estimate the progress of the corrosion, whose crystalline structures were visualized using scanning electron microscopy with energy dispersive spectroscopy, identified by X-ray diffraction, and characterized by spectrocolorimetry. The electrochemical measurements demonstrated that greater damage (in terms of color change and corrosion product formation did not correspond to deficiencies in protection. The mixed-acid solution did not corrode the bronzes, as would be expected from the additive effects of the single acids. The postulated mechanisms of metal dissolution appear to be specific to a particular bronze alloy, with the tin component playing an important role.

Late Bronze Age climate change and the destruction of the Mycenaean Palace of Nestor at Pylos.

Science.gov (United States)

Finné, Martin; Holmgren, Karin; Shen, Chuan-Chou; Hu, Hsun-Ming; Boyd, Meighan; Stocker, Sharon

2017-01-01

This paper offers new high-resolution oxygen and carbon isotope data from Stalagmite S1 from Mavri Trypa Cave, SW Peloponnese. Our data provide the climate background to the destruction of the nearby Mycenaean Palace of Nestor at Pylos at the transition from Late Helladic (LH) IIIB to LH IIIC, ~3150-3130 years before present (before AD 1950, hereafter yrs BP) and the subsequent period. S1 is dated by 24 U-Th dates with an averaged precision of ±26 yrs (2σ), providing one of the most robust paleoclimate records from the eastern Mediterranean for the end of the Late Bronze Age (LBA). The δ18O record shows generally wetter conditions at the time when the Palace of Nestor at Pylos was destroyed, but a brief period of drier conditions around 3200 yrs BP may have disrupted the Mycenaean agricultural system that at the time was likely operating close to its limit. Gradually developing aridity after 3150 yrs BP, i.e. subsequent to the destruction, probably reduced crop yields and helped to erode the basis for the reinstitution of a central authority and the Palace itself.

Late Bronze Age climate change and the destruction of the Mycenaean Palace of Nestor at Pylos.

Directory of Open Access Journals (Sweden)

Martin Finné

Full Text Available This paper offers new high-resolution oxygen and carbon isotope data from Stalagmite S1 from Mavri Trypa Cave, SW Peloponnese. Our data provide the climate background to the destruction of the nearby Mycenaean Palace of Nestor at Pylos at the transition from Late Helladic (LH IIIB to LH IIIC, ~3150-3130 years before present (before AD 1950, hereafter yrs BP and the subsequent period. S1 is dated by 24 U-Th dates with an averaged precision of ±26 yrs (2σ, providing one of the most robust paleoclimate records from the eastern Mediterranean for the end of the Late Bronze Age (LBA. The δ18O record shows generally wetter conditions at the time when the Palace of Nestor at Pylos was destroyed, but a brief period of drier conditions around 3200 yrs BP may have disrupted the Mycenaean agricultural system that at the time was likely operating close to its limit. Gradually developing aridity after 3150 yrs BP, i.e. subsequent to the destruction, probably reduced crop yields and helped to erode the basis for the reinstitution of a central authority and the Palace itself.

The occupational exposure limit for fluid aerosol generated in metalworking operations: limitations and recommendations.

Science.gov (United States)

Park, Donguk

2012-03-01

The aim of this review was to assess current knowledge related to the occupational exposure limit (OEL) for fluid aerosols including either mineral or chemical oil that are generated in metalworking operations, and to discuss whether their OEL can be appropriately used to prevent several health risks that may vary among metalworking fluid (MWF) types. The OEL (time-weighted average; 5 mg/m(3), short-term exposure limit ; 15 mg/m(3)) has been applied to MWF aerosols without consideration of different fluid aerosol-size fractions. The OEL, is also based on the assumption that there are no significant differences in risk among fluid types, which may be contentious. Particularly, the health risks from exposure to water-soluble fluids may not have been sufficiently considered. Although adoption of The National Institute for Occupational Safety and Health's recommended exposure limit for MWF aerosol (0.5 mg/m(3)) would be an effective step towards minimizing and evaluating the upper respiratory irritation that may be caused by neat or diluted MWF, this would fail to address the hazards (e.g., asthma and hypersensitivity pneumonitis) caused by microbial contaminants generated only by the use of water-soluble fluids. The absence of an OEL for the water-soluble fluids used in approximately 80-90 % of all applicants may result in limitations of the protection from health risks caused by exposure to those fluids.

Genetic characteristics and migration history of a bronze culture population in the West Liao-River valley revealed by ancient DNA.

Science.gov (United States)

Li, Hongjie; Zhao, Xin; Zhao, Yongbin; Li, Chunxiang; Si, Dayong; Zhou, Hui; Cui, Yinqiu

2011-12-01

In order to study the genetic characteristics of the Lower Xiajiadian culture (LXC) population, a main bronze culture branch in northern China dated 4500-3500 years ago, two uniparentally inherited markers, mitochondrial DNA and Y-chromosome single-nucleotide polymorphisms (Y-SNPs), were analyzed on 14 human remains excavated from the Dadianzi site. The 14 sequences, which contained 13 haplotypes, were assigned to 9 haplogroups, and Y-SNP typing of 5 male individuals assigned them to haplogroups N (M231) and O3 (M122). The results indicate that the LXC population mainly included people carrying haplogroups from northern Asia who had lived in this region since the Neolithic period, as well as genetic evidence of immigration from the Central Plain. Later in the Bronze Age, part of the population migrated to the south away from a cooler climate, which ultimately influenced the gene pool in the Central Plain. Thus, climate change is an important factor, which drove the population migration during the Bronze Age in northern China. Based on these results, the local genetic continuity did not seem to be affected by outward migration, although more data are needed especially from other ancient populations to determine the influence of return migration on genetic continuity.

Production and properties of bronze based cellular materials

International Nuclear Information System (INIS)

Strobl, S.; Danninger, H.

2001-01-01

For production of lightweight components, cellular materials offer attractive potential. Here, manufacturing of sintered bodies from bronze hollow spheres is described. The process starts with fabrication of hollow copper particles by cementation of Cu on iron particles. The still fragile Cu shells are consolidated by coating with Sn and subsequent gravity sintering. The resulting specimens exhibit a closed cell bronze structure with rather consistent morphology and cell wall thickness. The apparent density may range between 1.5 and 3.0 gcm -3 and can be controlled by variation of particle size and wall thickness. The mechanical behavior of the structures esp. during compressive loading is described and related to the microstructural parameters. (author)

Ferroelectric properties of tungsten bronze morphotropic phase boundary systems

International Nuclear Information System (INIS)

Oliver, J.R.; Neurgaonkar, R.R.; Cross, L.E.; Pennsylvania State Univ., University Park, PA

1989-01-01

Tungsten bronze ferroelectrics which have a morphotropic phase boundary (MPB) can have a number or enhanced dielectric, piezoelectric, and electrooptic properties compared to more conventional ferroelectric materials. The structural and ferroelectric properties of several MPB bronze systems are presented, including data from sintered and hot-pressed ceramics, epitaxial thin films, and bulk single crystals. Included among these are three systems which had not been previously identified as morphotropic. The potential advantages and limitations of these MPB systems are discussed, along with considerations of the appropriate growth methods for their possible utilization in optical, piezoelectric, or pyroelectric device applications

Ancient road transport devices: Developments from the Bronze Age to the Roman Empire

Science.gov (United States)

Rossi, Cesare; Chondros, Thomas G.; Milidonis, Kypros F.; Savino, Sergio; Russo, Flavio

2016-03-01

The development of transportation systems has significantly enhanced the welfare and modernization of society. Wooden vehicles pulled by animals have been used for land transportation since the early Bronze Age. Whole-body gharries with rigid wheels pulled by oxen appeared in Crete by 2000 BC or earlier. Horses originating from the East were depicted in early Cretan seal-rings of the same period. The two-wheeled horsedrawn chariot was one of the most important inventions in history. This vehicle provided humanity its first concept of personal transport and was the key technology of war for 2000 years. Chariots of Mycenaean and Archaic Greece with light and flexible four-spoked wheels acting as spring suspensions were depicted in vase paintings. The development of this vehicle incorporated the seeds of a primitive design activity and was important for engineering. The Trojan horse since 1194 BC and the helepolis since 700 BC were the first known machines on a wheeled base transported by horses or self-powered. Ancient engineers invented bearings lubricated with fat, and Romans introduced the ancestors of ball bearings for their wagons and carts. The historic evolution of wheeled transportation systems, along with early traction, suspension, and braking systems, is presented in this paper. Analytical and numerical methods are incorporated to analyze the most conceivable loading situations of typically reconstructed wheeled transportation systems in ancient times. Traction requirements both for horse-driven machines and the power for internal motors are also analyzed. This study can serve as a basis for further development of detailed reconstruction of transportation systems in antiquity.

The significance of the Sun, Moon and celestial bodies to societies in the Carpathian basin during the Bronze Age

Science.gov (United States)

Pásztor, Emília

2011-06-01

Celestial events often exerted a great or even decisive influence on the life of ancient communities. They may provide some of the foundations on which an understanding of the deeper meaning of mythologies, religious systems and even folk tales can be based. These influences are reflected and may be detected in the archaeological material as well. There is good evidence that celestial (especially solar and perhaps lunar) phenomena played a particularly important rôle in the worldview of prehistoric Europe. To reveal the social and ideational significance of concepts relating to the celestial bodies in the prehistory of the Carpathian Basin, complex investigations on orientations of houses and graves, prestige archaeological finds and iconography have been accomplished. The results indicate ideological and/or social changes, which developed into a likely organized ideological system in large part of Central Europe including the Carpathian Basin by the Late Bronze Age. It might also be the first period in prehistory when people became really interested in celestial phenomena.

Antibacterial drugs as corrosion inhibitors for bronze surfaces in acidic solutions

Energy Technology Data Exchange (ETDEWEB)

Rotaru, Ileana [Department of Chemical Engineering, “Babes-Bolyai” University, 11 Arany-Janos St., 400028 Cluj-Napoca (Romania); Varvara, Simona, E-mail: svarvara@uab.ro [Department of Exact Sciences and Engineering, “1 Decembrie 1918” University, 11-13 Nicolae Iorga St., 510009 Alba Iulia (Romania); Gaina, Luiza [Department of Chemical Engineering, “Babes-Bolyai” University, 11 Arany-Janos St., 400028 Cluj-Napoca (Romania); Muresan, Liana Maria, E-mail: limur@chem.ubbcluj.ro [Department of Chemical Engineering, “Babes-Bolyai” University, 11 Arany-Janos St., 400028 Cluj-Napoca (Romania)

2014-12-01

Graphical abstract: - Highlights: • All four investigated antibacterial drugs act as corrosion inhibitors for bronze surface. • In the presence of antibiotics, a 3RC electric circuit simulates the corrosion system. • The electrochemical results indicate as best inhibitors Doxy, followed by Strepto. • HOMO–LUMO energy gap increases in the order: Doxy > Strepto > Cipro > Amoxi. • The thin protective film on bronze is reinforced by the presence of the antibiotics. - Abstract: The present study is aiming to investigate the effect of four antibiotics (amoxicillin, ciprofloxacin, doxycycline and streptomycin,) belonging to different classes of antibacterial drugs on bronze corrosion in a solution simulating an acid rain (pH 4). Due to their ability to form protective films on the metal surface, the tested antibiotics act as corrosion inhibitors for bronze. The antibiotics were tested at various concentrations in order to determine the optimal concentration range for the best corrosion inhibiting effect. In evaluating the inhibition efficiency, polarization curves, electrochemical impedance spectroscopy, SEM and XPS measurements were used. Moreover, a correlation between the inhibition efficiency of some antibacterial drugs and certain molecular parameters was determined by quantum chemical computations. Parameters like energies E{sub HOMO} and E{sub LUMO} and HOMO–LUMO energy gap were used for correlation with the corrosion data.

Antibacterial drugs as corrosion inhibitors for bronze surfaces in acidic solutions

International Nuclear Information System (INIS)

Rotaru, Ileana; Varvara, Simona; Gaina, Luiza; Muresan, Liana Maria

2014-01-01

Graphical abstract: - Highlights: • All four investigated antibacterial drugs act as corrosion inhibitors for bronze surface. • In the presence of antibiotics, a 3RC electric circuit simulates the corrosion system. • The electrochemical results indicate as best inhibitors Doxy, followed by Strepto. • HOMO–LUMO energy gap increases in the order: Doxy > Strepto > Cipro > Amoxi. • The thin protective film on bronze is reinforced by the presence of the antibiotics. - Abstract: The present study is aiming to investigate the effect of four antibiotics (amoxicillin, ciprofloxacin, doxycycline and streptomycin,) belonging to different classes of antibacterial drugs on bronze corrosion in a solution simulating an acid rain (pH 4). Due to their ability to form protective films on the metal surface, the tested antibiotics act as corrosion inhibitors for bronze. The antibiotics were tested at various concentrations in order to determine the optimal concentration range for the best corrosion inhibiting effect. In evaluating the inhibition efficiency, polarization curves, electrochemical impedance spectroscopy, SEM and XPS measurements were used. Moreover, a correlation between the inhibition efficiency of some antibacterial drugs and certain molecular parameters was determined by quantum chemical computations. Parameters like energies E HOMO and E LUMO and HOMO–LUMO energy gap were used for correlation with the corrosion data

Mortality studies of metalworking fluid exposure in the automobile industry: VI. A case-control study of esophageal cancer.

Science.gov (United States)

Sullivan, P A; Eisen, E A; Woskie, S R; Kriebel, D; Wegman, D H; Hallock, M F; Hammond, S K; Tolbert, P E; Smith, T J; Monson, R R

1998-07-01

Results are reported from a nested case-control study of 60 esophageal cancer deaths among 46,384 automobile manufacturing workers potentially exposed to metalworking fluids (MWF) in machining and grinding operations. By using incidence-density sampling, controls were selected with a sampling ratio of 20:1 from among co-workers who remained at risk by the age of death of the case, matched on race, gender, plant, and year of birth. Conditional logistic regression was used to evaluate the risk associated with cumulative exposure (mg/m3-years) to each of three types of metalworking fluid (straight, soluble, and synthetic MWF), as well as with years of exposure to selected components of MWF, including nitrosamines, sulfur, biocides, and several metals. Esophageal cancer was found to be significantly associated with exposure to both soluble and synthetic MWF in grinding operations. The odds ratios (ORs) for grinding with soluble MWF were elevated at 2.5 or greater in all categories of cumulative exposure, although the exposure-response trend was statistically significant only when exposure was measured as duration. Those with 12 or more years exposure to soluble MWF in grinding operations experienced a 9.3-fold relative risk of esophageal cancer mortality (95% CI = 2.1-42.1). The OR for ever grinding with synthetic MWF was 4.1 (95% CI = 1.1-15.0). Elevated risk was also associated with two agents found in both synthetic and soluble fluids, nitrosamines, and biocides. For exposure to nitrosamines, the OR was 5.4 (95% CI = 1.5-19.9); for biocides the OR was 3.8 (95% CI = 0.8-18.9). However, because the same workers were exposed to grinding with synthetics, nitrosamines and biocides, it was not possible to separate the specific risks associated with these components.

21 CFR 73.1646 - Bronze powder.

Science.gov (United States)

2010-04-01

... percent. Maximum particle size 45µ (95 percent minimum). Aluminum, zinc, tin, and copper content shall be based on the weight of the dried powder after being thoroughly washed with ether. (c) Uses and restrictions. Bronze powder may be safely used in color externally applied drugs, including those intended for...

Lead isotope approach to the understanding of early Japanese bronze culture

International Nuclear Information System (INIS)

Mabuchi, H.; Hirao, Y.

1985-01-01

For several years, the authors have used lead isotope analysis to investigate extensively the provenance of ancient bronze or copper artifacts which had been excavated mainly from Japanese archaeological sites. The results have been published item by item in several relevant Japanese journals. This review is intended to give an account which will review the whole work relating early Japanese bronze culture to Chinese and Korean cultures through lead isotope study. (author)

75 FR 57825 - Culturally Significant Objects Imported for Exhibition Determinations: “Ancient Chinese Bronzes...

Science.gov (United States)

2010-09-22

... DEPARTMENT OF STATE [Public Notice 7181] Culturally Significant Objects Imported for Exhibition Determinations: ``Ancient Chinese Bronzes From the Shouyang Studio: The Katherine and George Fan Collection... ``Ancient Chinese Bronzes from the Shouyang Studio: The Katherine and George Fan Collection,'' imported from...

Monumental megalithic burial and rock art tell a new story about the Levant Intermediate Bronze “Dark Ages”

Science.gov (United States)

Barash, Alon; Eisenberg-Degen, Davida; Grosman, Leore; Oron, Maya; Berger, Uri

2017-01-01

The Intermediate Bronze Age (IB) in the Southern Levant (ca. 2350–2000 BCE) is known as the “Dark Ages,” following the collapse of Early Bronze urban society and predating the establishment of the Middle Bronze cities. The absence of significant settlements and monumental building has led to the reconstruction of IB social organization as that of nomadic, tribal society inhabiting rural villages with no central governmental system. Excavation in the Shamir Dolmen Field (comprising over 400 dolmens) on the western foothills of the Golan Heights was carried out following the discovery of rock art engravings on the ceiling of the central chamber inside one of the largest dolmens ever recorded in the Levant. Excavation of this multi-chambered dolmen, covered by a basalt capstone weighing some 50 tons, revealed a secondary multi-burial (of both adults and children) rarely described in a dolmen context in the Golan. Engraved into the rock ceiling above the multi-burial is a panel of 14 forms composed of a vertical line and downturned arc motif. 3D-scanning by structured-light technology was used to sharpen the forms and revealed the technique employed to create them. Building of the Shamir dolmens required a tremendous amount of labor, architectural mastery, and complex socio-economic organization well beyond the capacity of small, rural nomadic groups. The monumental megalithic burial of the Shamir dolmens indicates a hierarchical, complex, non-urban governmental system. This new evidence supports a growing body of recent criticism stemming from new discoveries and approaches that calls for rethinking our views of the Levantine IB “Dark Ages.” PMID:28253312

Investigations on dry sliding of laser cladded aluminum bronze

Directory of Open Access Journals (Sweden)

Freiße Hannes

2016-01-01

Full Text Available The aim of this study was to investigate the tribological behaviour of laser cladded aluminum bronze tool surfaces for dry metal forming. In a first part of this work a process window for cladding aluminum bronze on steel substrate was investigated to ensure a low dilution. Therefore, the cladding speed, the powder feed rate, the laser power and the distance between the process head and the substrate were varied. The target of the second part was to investigate the influence of different process parameters on the tribological behaviour of the cladded tracks. The laser claddings were carried out on both aluminum bronze and cold work tool steel as substrate materials. Two different particle sizes of the cladding powder material were used. The cladding speed was varied and a post-processing laser remelting treatment was applied. It is shown that the tribological behaviour of the surface in a dry oscillating ball-on-plate test is highly dependent on the substrate material. In the third part a deep drawing tool was additively manufactured by direct laser deposition. Furthermore, the tool was applied to form circular cups with and without lubrication.

The Influence of Heat Treatment and Quencing Media at Bronze 80% Cu–20% Sn toward Fatique Life

Directory of Open Access Journals (Sweden)

Anak Agung Istri Agung Sri Komaladewi

2012-11-01

Full Text Available Production of the Balinese gamelan product rest on molding process which then continued with forging process, adjustment,and finally the finishing process. But still often to make the failure from this material like. The material become brokebecause heavy thing with the user processing (playing gambelan with continuity in the long time. The broke that happenfrom the heavy thing by the continuety that is called fatigue. At this examination the things that will be up is how much theheat treatment influence and the cooler thing with the fatigue life through the Reversed Bending process. By to variated theheat treatment and cooler thing to Bronze mixture 80%Cu and 20%Sn. This examination to aim at knowing the heattreatment influence and cooler thing at the composition of Bronze 80%Cu and 20%Sn about the fatigue life.The makingprocess of this things made by copper solution and the white Tin with the composition are 80%Cu and 20%Sn by variatedheat treatment and cooler media. The produce of this solution will print with the Reversed Bending speciment. Then thespeciment gift the heat treatment about 6500 C, 7000 C till 7500 C, and then the speciment keep cold by the water, oil and theair. The thing will be analize from the breach counture, Macro Structure and Micro Structure.The examination produceshowing the growing up at the fatigue life in the Bronze mixture 80%Cu - 20%Sn, From the heat treatment 6500 C, 7000 Cand 7500 C and become the drop age fatigue with the water cooler media with the age fatigue abaut 36621 cycle, and thefatigue by oil about 44975 cycle and the air cooler age fatigue about 55191 cycle. The inspection makro structure thebreach face colouring litle bit dark and the inspection mikro structure, the metal structure lool more bright.

The Occupational Exposure Limit for Fluid Aerosol Generated in Metalworking Operations: Limitations and Recommendations

Directory of Open Access Journals (Sweden)

Donguk Park

2012-03-01

Full Text Available The aim of this review was to assess current knowledge related to the occupational exposure limit (OEL for fluid aerosols including either mineral or chemical oil that are generated in metalworking operations, and to discuss whether their OEL can be appropriately used to prevent several health risks that may vary among metalworking fluid (MWF types. The OEL (time-weighted average; 5 mg/m3, short-term exposure limit ; 15 mg/m3 has been applied to MWF aerosols without consideration of different fluid aerosol-size fractions. The OEL, is also based on the assumption that there are no significant differences in risk among fluid types, which may be contentious. Particularly, the health risks from exposure to water-soluble fluids may not have been sufficiently considered. Although adoption of The National Institute for Occupational Safety and Health's recommended exposure limit for MWF aerosol (0.5 mg/m3 would be an effective step towards minimizing and evaluating the upper respiratory irritation that may be caused by neat or diluted MWF, this would fail to address the hazards (e.g., asthma and hypersensitivity pneumonitis caused by microbial contaminants generated only by the use of water-soluble fluids. The absence of an OEL for the water-soluble fluids used in approximately 80-90 % of all applicants may result in limitations of the protection from health risks caused by exposure to those fluids.

The botanical macroremains from the prehistoric settlement Kalnik-Igrišče (NW Croatia in the context of current knowledge about cultivation and plant consumption in Croatia and neighboring countries during the Bronze Age

Directory of Open Access Journals (Sweden)

Sara Mareković

2015-07-01

Full Text Available This paper presents the results of the first extensive archaeobotanical research into a Bronze Age site in Croatia. The aim of the study was to reveal what plants were consumed (grown at Kalnik-Igrišče (NW Croatia in the Bronze Age and to realize if the plant diet of the local population differed from that of the inhabitants in neighboring countries. The results show that all plant macrofossils found at Kalnik-Igrišče can be classified into one of four functional groups: cereals, cultivated legumes, useful trees and weeds. As much as 98% of the findings are of cereals and legumes. The most abundant species found are Panicum miliaceum (millet, Hordeum vulgare (barley, Vicia faba (faba bean, Triticum aestivum ssp. aestivum (bread wheat, Triticum turgidum ssp. dicoccon (emmer wheat and Lens culinaris (lentils. The findings from Kalnik-Igrišče do not differ from the findings of neighboring countries, indicating that there were similar diets and agricultural/plant-collecting activities throughout the whole of the studied area (Bosnia and Herzegovina, Slovenia, Serbia, Italy, Austria and Hungary.

Portable EDXRF investigation of the patinas on the Riace Bronzes

Energy Technology Data Exchange (ETDEWEB)

Buccolieri, Giovanni, E-mail: giovanni.buccolieri@unisalento.it [Università del Salento, Dipartimento di Matematica e Fisica, via Arnesano, 73100 Lecce (Italy); Buccolieri, Alessandro, E-mail: alessandro.buccolieri@unisalento.it [Università del Salento, Dipartimento di Scienze e Tecnologie Biologiche e Ambientali, via Monteroni, 73100 Lecce (Italy); Donati, Paola, E-mail: paola.donati@beniculturali.it [Istituto Superiore per la Conservazione e il Restauro, via di San Michele n. 23, 00153 Roma (Italy); Marabelli, Maurizio, E-mail: maurizio.marabelli@libero.it [Istituto Superiore per la Conservazione e il Restauro, via di San Michele n. 23, 00153 Roma (Italy); Castellano, Alfredo, E-mail: alfredo.castellano@unisalento.it [Università del Salento, Dipartimento di Matematica e Fisica, via Arnesano, 73100 Lecce (Italy)

2015-01-15

This paper summarizes the experimental results concerning the Energy Dispersive X-ray Fluorescence (EDXRF) analysis of patinas on two Riace Bronzes, kept in the National Archaeological Museum of Reggio Calabria (Calabria, Southern Italy). The two large Greek sculptures, famous nude bearded warriors both dated in the fifth century BC, are without a doubt, two masterpieces of inestimable historic and artistic value. EDXRF survey had the aim to determinate the chemical composition of the surface of these two bronze statues and to discriminate their different patinas. In particular, the concentration of sulphur, chlorine, tin, manganese, iron, copper, zinc and lead was determined by using a portable apparatus. Multivariate statistical analysis was carried out in order to identify possible correlations and/or differences of elemental composition among the patinas of these two statues. The information obtained made it possible to improve knowledge about the patinas of the Riace Bronzes, and this may help further studies and subsequent methods of restoration and/or of preservation of the two celebrated Greek sculptures.

Izumo and the East Asian Bronze Culture%出云与东亚的青铜文化

Institute of Scientific and Technical Information of China (English)

王巍

2003-01-01

The origin of bronzes in Yayoi Japan can be traced to their counterparts in Xia-Shang-Zhou China. It must have happened that ancient Chinese bronze weapons and small bells used aspractical implements were first spread into Japan through northeastern China and the Korean Peninsulaand then developed gradually into bronzes exclusively for sacrificial use. Among the bronzes unearthed inbatches from hoards in the Izumo area within the coastland of the Sea of Japan, the spearheads may havebeen made in the north of Kyushu, the small bells must have come from the Kinai region, and the over300 swords were probably local products. The repeated discovery of Yayoi bronze hoards in the Izumoarea suggests that this region was absolutely not an unpopulated land. On the contrary, as a very im-portant district, it should be fully affirmed to have played a considerable role in the development of an-cient Japanese history.

Tribaloy alloy reinforced tin-bronze composite coating for journal bearing applications

International Nuclear Information System (INIS)

Gao, F.; Liu, R.; Wu, X.J.

2011-01-01

This article presents an experimental study of the tribological behavior of a tin/bronze-based composite coating. The improved-ductility Tribaloy alloy (T-401) particles are selected as the reinforcement. This coating is made on the bushing of planet journals used in aerospace engines, deposited with the high velocity oxygen fuel (HVOF) thermal spray technique. The tribological properties such as friction and wear resistance of the coated bushing are investigated under the WAMsc3 Sliding Contact Test, along with the leaded tin/bronze bushing tested for comparison. The testing results show that the bushing coated with the composite exhibits superior tribological properties to the leaded tin/bronze bushing in that the former runs longer before the friction coefficient reaches 0.5 and also leads a to lower wear rate than the latter. The experimental results and wear mechanisms of these two bushings are discussed with the assistance of worn surface analyses using scanning electron microscopy (SEM).

Boiling heat transfer on single phosphor bronze and copper mesh microstructures

Directory of Open Access Journals (Sweden)

Orman Łukasz J.

2014-03-01

Full Text Available The paper presents experimental results of boiling heat transfer of distilled water and ethyl alcohol on surfaces covered with single layers of wire mesh structures made of phosphor bronze and copper. For each material two kinds of structures have been considered (higher and lower in order to determine the impact of the height of the structure on boiling heat transfer. The wire diameter of the copper meshes was 0,25 mm and 0,32 mm, while of the bronze meshes: 0,20 mm and 0,25 mm. The structures had the same mesh aperture (distance between the wires – 0,50 mm for copper and 0,40 for bronze but different wire diameter and, consequently, different height of the layers. The tests have been performed under ambient pressure in the pool boiling mode. The obtained results indicate a visible impact of the layer height on the boiling heat transfer performance of the analysed microstructures.

Influence of Metal-Coated Graphite Powders on Microstructure and Properties of the Bronze-Matrix/Graphite Composites

Science.gov (United States)

Zhao, Jian-hua; Li, Pu; Tang, Qi; Zhang, Yan-qing; He, Jian-sheng; He, Ke

2017-02-01

In this study, the bronze-matrix/x-graphite (x = 0, 1, 3 and 5%) composites were fabricated by powder metallurgy route by using Cu-coated graphite, Ni-coated graphite and pure graphite, respectively. The microstructure, mechanical properties and corrosive behaviors of bronze/Cu-coated-graphite (BCG), bronze/Ni-coated-graphite (BNG) and bronze/pure-graphite (BPG) were characterized and investigated. Results show that the Cu-coated and Ni-coated graphite could definitely increase the bonding quality between the bronze matrix and graphite. In general, with the increase in graphite content in bronze-matrix/graphite composites, the friction coefficients, ultimate density and wear rates of BPG, BCG and BNG composites all went down. However, the Vickers microhardness of the BNG composite would increase as the graphite content increased, which was contrary to the BPG and BCG composites. When the graphite content was 3%, the friction coefficient of BNG composite was more stable than that of BCG and BPG composites, indicating that BNG composite had a better tribological performance than the others. Under all the values of applied loads (10, 20, 40 and 60N), the BCG and BNG composites exhibited a lower wear rate than BPG composite. What is more, the existence of nickel in graphite powders could effectively improve the corrosion resistance of the BNG composite.

METHODOLOGICAL DEVELOPMENTS IN 3D SCANNING AND MODELLING OF ARCHAEOLOGICAL FRENCH HERITAGE SITE : THE BRONZE AGE PAINTED CAVE OF "LES FRAUX", DORDOGNE (FRANCE

Directory of Open Access Journals (Sweden)

A. Burens

2013-07-01

Full Text Available For six years, an interdisciplinary team of archaeologists, surveyors, environmentalists and archaeometrists have jointly carried out the study of a Bronze Age painted cave, registrered in the French Historical Monuments. The archaeological cave of Les Fraux (Saint-Martin-de-Fressengeas, Dordogne forms a wide network of galleries, characterized by the exceptional richness of its archaeological remains such as ceramic and metal deposits, parietal representation and about domestic fireplaces. This cave is the only protohistorical site in Europe wherein are gathered testimonies of domestic, spiritual and artistic activities. Fortunately, the cave was closed at the end of the Bronze Age, following to the collapse of its entrance. The site was re-discovered in 1989 and its study started in 2007. The study in progress takes place in a new kind of tool founded by the CNRS's Institute of Ecology and Environment. The purpose of this observatory is the promotion of new methodologies and experimental studies in Global Ecology. In that framework, 3D models of the cave constitute the common work support and the best way for scientific communication for the various studies conducted on the site by nearly forty researchers. In this specific context, a partnership among archaeologists and surveyors from INSA Strasbourg allows the team to develop, in an interdisciplinary way, new methods of data acquiring based on contact-free measurements techniques in order to acquire a full 3D-documentation. This work is conducted in compliance with the integrity of the site. Different techniques based on Terrestrial Laser Scanning, Digital Photogrammetry and Spatial Imaging System have been used in order to generate a geometric and photorealistic 3D model from the combination of point clouds and photogrammetric images, for both visualization and accurate documentation purposes. Various scales of acquiring and diverse resolutions have been applied according to the subject

Study on surface properties of gilt-bronze artifacts, after Nd:YAG laser cleaning

Energy Technology Data Exchange (ETDEWEB)

Lee, Hyeyoun [Division of Restoration Technology, National Research Institute of Cultural Heritage, Daejeon (Korea, Republic of); Cho, Namchul, E-mail: nam1611@hanmail.net [Department of Cultural Heritage Conservation Science, Kongju National University, Gongju, 314-701 (Korea, Republic of); Lee, Jongmyoung [Laser Engineering Group, IMT Co. Ltd, Gyeonggi (Korea, Republic of)

2013-11-01

As numerous pores are formed at plating gilt-bronze artifacts, the metal underlying the gold is corroded and corrosion products are formed on layer of gold. Through this study, the surfaces of gilt-bronze are being investigated before and after the laser irradiation to remove corrosion products of copper by using Nd:YAG laser. For gilt-bronze specimens, laser and chemical cleaning were performed, and thereafter, surface analysis with SEM-EDS, AFM, and XPS were used to determine the surface characteristics. Experimental results show that chemical cleaning removes corrosion products of copper through dissolution but it was not removed uniformly and separated the metal substrate and the gold layer. Nevertheless, through laser cleaning, some of the corrosions were removed with some damaged areas due to certain conditions and brown residues remained. Brown residues were copper corrosion products mixed with soil left within the gilt layer. It was due to surface morphology of uneven and rough gilt layer. Hence, they did not react effectively to laser beams, and thus, remained as residues. The surface properties of gilt-bronze should be thoroughly investigated with various surface analyses to succeed in laser cleaning without damages or residues.

Root canal morphology of Chalcolithic and early bronze age human populations of El Mirador Cave (Sierra de Atapuerca, Spain).

Science.gov (United States)

Ceperuelo, Dolors; Lozano, Marina; Duran-Sindreu, Fernando; Mercadé, Montse

2014-12-01

This study provides a morphological characterization of the inner anatomy of the root canals of permanent first and second molars in Chalcolithic and early Bronze Age human fossils using cone-beam computed tomography. The general evolutionary trend in present-day human dentition is related to morphological simplification. As little is known about when this trend appeared in Homo sapiens populations, the aim of this work is to test the presence of modern radicular morphology 4,400 years ago. Fifty-four permanent first and second maxillary and mandibular molars of 17 individuals were included in the study. All maxillary first and second molars showed three separate roots. Almost all the lower molars analyzed (100% of first molars and 75% of second molars) had two separate roots. More differences in the canal system configuration were documented in the maxillary mesiobuccal roots than in the palatal or distobuccal roots. The most variable tooth in root and canal configuration is the maxillary second molar. It should be pointed out that 12.5% of the teeth analyzed showed a C-shaped root configuration. © 2014 Wiley Periodicals, Inc.

Degradation measurement of bronzes, a recent application of the TLA techniques in the field of cultural heritage

International Nuclear Information System (INIS)

Danesi, P.R.; Laguzzi, G.; Luvidi, L

2001-01-01

The thin layer technique is normally applied in wear and corrosion monitoring of mechanical and plant components. A recent applications refers to the field of Cultural Heritage. In particular thought national and international research programmes TLA is used as a sensitivity toll in determining the properties towards corrosion of new bronze alloys to be used for artistic purposes, as in manufacturing of outdoor artworks. One activated and exposed to natural or artificial corrosive environments the bronze surface is treated with pick ling solutions to remove the corrosion products, The corresponding thickness loss is determined by the relevant γ-activity loss. The method sensitivity allows of the thickness loss evaluation in the order micrometers of lower. Besides comparative analyses of the behaviour of different bronze alloys, this method is also applied in determining the effectiveness of corrosion inhibitor or protective films, normally used on outdoor bronze sculptures. The metal activation is carried out by using a cyclotron accelerated proton beam (11.5 MeV) which products on the bronze surface and along a defined depth γemitting radionuclide 65 Zn (t 1/2 = 244 days). In the present paper, bronze corrosion results obtained in different environmental conditions as outdoor exposures and artificial weathering experiments are reported

Glycerol oxidehydration into acrolein and acrylic acid over W/V/Nb bronzes with hexagonal structure

Energy Technology Data Exchange (ETDEWEB)

Basile, F.; Cavani, F.; Chieregato, A. [Bologna Univ. (Italy). Dipt. di Chimica Industriale e dei Materiali; CIRI Energia e Ambiente, Bologna (Italy); Concepcion, P.; Lopez Nieto, J.M.; Soriano, M.D. [Univ. Politecnica de Valencia (Spain). Inst. de Tecnologia Quimica; Liosi, G.; Trevisanut, C. [Bologna Univ. (Italy). Dipt. di Chimica Industriale e dei Materiali

2012-07-01

This paper deals with an investigation of hexagonal W-V-Nb-O and W-V-Mo-O bronzes as catalysts for the one-pot oxidehydration of glycerol into acrylic acid. In a previous work, we reported a study on a bi-component bronze W-V-O that allowed us to obtain a 25% acrylic acid selectivity; in the current work, the incorporation of either Nb or Mo in a tri-component bronze structure allowed us to tune the acid and redox properties of the catalyst, so as to study their influence on the overall reaction scheme. (orig.)

Bronze railing from Mediana

Directory of Open Access Journals (Sweden)

Vasić Miloje R.

2003-01-01

Full Text Available The hoard containing components of bronze railing was discovered in trench 7 during excavations at Mediana in 2000. Railing consists of cancelli and herms with busts of deities between them. Railing was constructed in such a way that it was possible to disassemble and reassemble it. Three cancelli one fragmented semicancellus cast together with herm and herms, one with bust of Aesculapius and other with bust of Luna. It could be concluded that railing consisted of two segments with passage between them. Male deities were represented on the left segment of the railing and female deities on the right segment. Detailed analysis revealed that Aesculapius as well as Luna bear strong mark of classical Greek and Hellenistic art, which experienced some kind of renaissance in the time of Constantine I. It is very probable that we can recognize the portrait of Faustina, Constantine’s wife in the portrait of Luna. According to the historical events the railing could have been produced before 325 AD when Constantine definitively accepted Christianity at Council of Nicaea. It is difficult to say where the railing had been produced. It had been most probably brought to Mediana during the stay of emperor Julian in Niš in 361. The sculptures found in one room of the villa with peristyle had probably been brought at the same time. The apse of triclinium of this villa had most likely been arranged as small shrine with bronze railing at its entrance. The railing was buried in 378 after battle of Adrianople and invasion of Goths in diocese Dacia.

Electrodeposited nanocrystalline bronze alloys as replacement for Ni

NARCIS (Netherlands)

Hovestad, A.; Tacken, R.A.; Mannetje, H.H.'t

2008-01-01

Nanocrystalline white-bronze, CuSn, electroplating was investigated as alternative to Ni plating as undercoat for noble metals in jewellery applications. A strongly acidic plating bath was developed with an organic additive to suppress hydrogen evolution and obtain bright coatings. Polarization

Genetic History of Xinjiang's Uyghurs Suggests Bronze Age Multiple-Way Contacts in Eurasia.

Science.gov (United States)

Feng, Qidi; Lu, Yan; Ni, Xumin; Yuan, Kai; Yang, Yajun; Yang, Xiong; Liu, Chang; Lou, Haiyi; Ning, Zhilin; Wang, Yuchen; Lu, Dongsheng; Zhang, Chao; Zhou, Ying; Shi, Meng; Tian, Lei; Wang, Xiaoji; Zhang, Xi; Li, Jing; Khan, Asifullah; Guan, Yaqun; Tang, Kun; Wang, Sijia; Xu, Shuhua

2017-10-01

The Uyghur people residing in Xinjiang, a territory located in the far west of China and crossed by the Silk Road, are a key ethnic group for understanding the history of human dispersion in Eurasia. Here we assessed the genetic structure and ancestry of 951 Xinjiang's Uyghurs (XJU) representing 14 geographical subpopulations. We observed a southwest and northeast differentiation within XJU, which was likely shaped jointly by the Tianshan Mountains, which traverses from east to west as a natural barrier, and gene flow from both east and west directions. In XJU, we identified four major ancestral components that were potentially derived from two earlier admixed groups: one from the West, harboring European (25-37%) and South Asian ancestries (12-20%), and the other from the East, with Siberian (15-17%) and East Asian (29-47%) ancestries. By using a newly developed method, MultiWaver, the complex admixture history of XJU was modeled as a two-wave admixture. An ancient wave was dated back to ∼3,750 years ago (ya), which is much earlier than that estimated by previous studies, but fits within the range of dating of mummies that exhibited European features that were discovered in the Tarim basin, which is situated in southern Xinjiang (4,000-2,000 ya); a more recent wave occurred around 750 ya, which is in agreement with the estimate from a recent study using other methods. We unveiled a more complex scenario of ancestral origins and admixture history in XJU than previously reported, which further suggests Bronze Age massive migrations in Eurasia and East-West contacts across the Silk Road. © The Author 2017. Published by Oxford University Press on behalf of the Society for Molecular Biology and Evolution. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Bayesian phylogenetic analysis of Semitic languages identifies an Early Bronze Age origin of Semitic in the Near East.

Science.gov (United States)

Kitchen, Andrew; Ehret, Christopher; Assefa, Shiferaw; Mulligan, Connie J

2009-08-07

The evolution of languages provides a unique opportunity to study human population history. The origin of Semitic and the nature of dispersals by Semitic-speaking populations are of great importance to our understanding of the ancient history of the Middle East and Horn of Africa. Semitic populations are associated with the oldest written languages and urban civilizations in the region, which gave rise to some of the world's first major religious and literary traditions. In this study, we employ Bayesian computational phylogenetic techniques recently developed in evolutionary biology to analyse Semitic lexical data by modelling language evolution and explicitly testing alternative hypotheses of Semitic history. We implement a relaxed linguistic clock to date language divergences and use epigraphic evidence for the sampling dates of extinct Semitic languages to calibrate the rate of language evolution. Our statistical tests of alternative Semitic histories support an initial divergence of Akkadian from ancestral Semitic over competing hypotheses (e.g. an African origin of Semitic). We estimate an Early Bronze Age origin for Semitic approximately 5750 years ago in the Levant, and further propose that contemporary Ethiosemitic languages of Africa reflect a single introduction of early Ethiosemitic from southern Arabia approximately 2800 years ago.

Study of wear mechanism of chopped fiber reinforced epoxy composite filled with graphite and bronze

Science.gov (United States)

Patil, Nitinchand; Prasad, Krishna

2018-04-01

The combined effect of graphite and sintered bronze with a short glass fiber reinforced epoxy composites was investigated in this work. A pin on disc wear test was carried out to study the wear behaviour and mechanism of the composites. The objective of this work is to develop an alternate friction resistance material for the application of sliding bearing. It was observed that the addition of sintered bronze improved mechanical and thermal stability of the composites as bronze has low contact resistance with graphite and has high thermal conductivity. It was observed from the test results that increased volume percentage of graphite and presence of bronze are play significant role in wear mechanism of the composites. It was observed from the scanning electronic microscopes (SEM) that the abrasive and adhesive wear mechanism was prominent in this study. It was also evident from the result that the frictional force remains stable irrespective of the applied normal load.

A small Bronze Age mining camp: La Loma de la Tejería (Albarracín, Teruel

Directory of Open Access Journals (Sweden)

Montero Ruiz, Ignacio

2008-06-01

Full Text Available This paper shows the research done at Loma de la Tejería (Albarracín, Teruel where a seasonal camp site linked to a mining-metallurgical works has been discovered. Studies on materials show the use of different geological resources: copper minerals, Keuper clays with “Jacintos de Compostela” and volcanic rocks. Pottery residual analysis has documented dairy milky products and alcoholic drinks. Chronologically the site is classified amongst Chalcolithic and Early Bronze Age, on the presence of Bell Beaker pottery.

Se presentan los datos de las excavaciones realizadas en la Loma de la Tejería (Albarracín, Teruel en la que se documenta un campamento estacional vinculado a tareas minero-metalúrgicas de pequeña escala. Los estudios realizados sobre el material indican el aprovechamiento de los recursos geológicos locales tanto de mineral de cobre, como de arcillas del Keuper con Jacintos de Compostela y rocas volcánicas. Los análisis de residuos han documentado en la cerámica productos lácteos y bebidas alcohólicas. Cronológicamente el yacimiento se encuadra en el Calcolítico y Bronce Antiguo, con presencia de cerámica campaniforme.

75 FR 15764 - Culturally Significant Objects Imported for Exhibition Determinations: “Gods of Angkor: Bronzes...

Science.gov (United States)

2010-03-30

... Determinations: ``Gods of Angkor: Bronzes From the National Museum of Cambodia'' SUMMARY: Notice is hereby given... objects to be included in the exhibition ``Gods of Angkor: Bronzes from the National Museum of Cambodia,'' imported from abroad for temporary exhibition within the United States, are of cultural significance. The...

Understanding metal–insulator transition in sodium tungsten bronze

Indian Academy of Sciences (India)

2015-05-20

May 20, 2015 ... We have carried out angle-resolved photoemission spectroscopy (ARPES) and spectromicroscopy studies to understand the metal–insulator transition (MIT) observed in sodium tungsten bronzes, NaWO3. The experimentally determined band structure is compared with the theoretical calculation based ...

Comparative Investigations on the Stress Corrosion Behavior of α -Al Bronze and α Brass in Sodium Nitrite

International Nuclear Information System (INIS)

Ashour, E.A.

1995-01-01

The stress corrosion behavior of α- Aluminum bronze (copper [Cu] -7% Al) (UNS C 61400) has been investigated as compared to α- brass under slow strain in sodium nitrite solutions under open - circuit and different anodic potentials. While α- brass was quite susceptible to SCC, α- Al bronze was found to be resistant to SCC. The ratios of time to failure in solution to that in air and of maximum stress in solution to that in air decreased sharply with increase of anodic potential for α-brass but remained virtually constant for α- Al bronze. The mode of failure was predominantly ductile for α- Al bronze under various conditions. The stress corrosion cracking of α - brass has been shown to be promoted by relatively concentrated Na N O 2 and high anodic potentials. Previous explanations for the change of the mode of failure from intergranular at open circuit potential (OCP) to transgranular cracking under anodic potential were confirmed. The bronzes resistance to SCC was attributed to the presence of Al 2 O 3 on the alloy surface. 10 Figs

Paleoecological crisis in the steppes of the Lower Volga region in the Middle of the Bronze Age (III-II centuries BC)

Science.gov (United States)

Demkina, T. S.; Borisov, A. V.; Demkin, V. A.; Khomutova, T. E.; Kuznetsova, T. V.; El'tsov, M. V.; Udal'tsov, S. N.

2017-07-01

Diagnostic features of a catastrophic aridization of climate, desertification, and paleoecological crisis in steppes of the Lower Volga region have been identified on the basis of data on the morphological, chemical, and microbiological properties of paleosols under archeological monuments (burial mounds) of the Middle Bronze Age. These processes resulted in a certain convergence of the soil cover with transformation of zonal chestnut (Kastanozems) paleosols and paleosolonetzes (Solonetz Humic) into specific chestnut-like eroded saline calcareous paleosols analogous to the modern brown desert-steppe soils (Calcisols Haplic) that predominated in this region 4300-3800 years ago.1 In the second millennium BC, humidization of the climate led to the divergence of the soil cover with secondary formation of the complexes of chestnut soils and solonetzes. This paleoecological crisis had a significant effect on the economy of the tribes in the Late Catacomb and Post-Catacomb time stipulating their higher mobility and transition to the nomadic cattle breeding.

The hydrogeological and paleoclimatic factors in the Bronze Age Motillas Culture of La Mancha (Spain): the first hydraulic culture in Europe

Science.gov (United States)

Benítez de Lugo Enrich, Luis; Mejías, Miguel

2017-11-01

Recent studies indicate that the motillas (Chalcolithic and Bronze Age settlements in La Mancha, Spain) could have constituted the most ancient groundwater collection system at regional scale in Europe. This paper presents the first hydrogeoarchaeological study at the regional level in La Mancha. The research includes borehole drilling and hydrogeological analysis of the territory on which the motillas are settled. The resulting data confirm a relationship between the geological substrate and the spatial distribution of the motillas, sited where groundwater was accessible by means of prehistoric technology. The motillas were built during the climatic event known as 4.2 ka cal BP, in a time of environmental stress after a period of severe and prolonged drought. In these environmental conditions, the construction of these wells was a successful solution that lived on for nearly a millennium and played a major part in the processes of change towards a more complex, hierarchical society.

Production of multifilamentary Nb3Sn composites incorporating a high tin bronze

International Nuclear Information System (INIS)

Petrovich, A.; Zeithlin, B.A.; Walker, M.S.

1977-01-01

The economics and processing methods have been examined for the fabrication of multifilamentary Nb 3 Sn using a high tin bronze reactive matrix. Four conductor configurations utilizing the high tin bronze were compared with a conventional Cu-13 wt % Sn bronze. The most promising of these designs is potentially 40% lower in cost per ampere meter than the conventional composite. Large hydrostatic extrusion facilities, which are required for the high tin processing, are not presently available in this country but can be made by conversion of conventional presses. They exist in Europe. Experiments were conducted to investigate the applicability of hydrostatic extrusion, and billet components were successfully prepared using the hydrostatic extrusion technique. We have concluded that the economics, availability of facilities and initial fabrication results are favorable for this type of conductor and that the next stage in this program of scale up to extrusion and drawing of 2'' to 3'' diameter composite billets should be undertaken

Determination of concentrations of minor and micro elements in ancient bronze drums artifacts samples by KO-standardization method of neutron activation analysis

International Nuclear Information System (INIS)

Nguyen Tac Anh; Ho Manh Dung; Diep Dinh Hoa; Cao Dong Vu

2000-01-01

The study aims to get a lot information about manufacturers of ancient bronze artifacts and ancient civilization. By KO-standardization method of neutron activation analysis developed in the Nuclear Research Institute, the concentrations of Au, Ag, As, Zn, Sb, Sn elements in ancient bronze alloy samples of 99 bronze artifacts from many excavated archaeological sites at the provinces in Vietnam were determined with uncertainties about ±10%. These elemental concentrations have been utilized in a statistical analysis procedure in order to determine similarities and correlation between the various samples. Th abnormal high of concentrations of noble metals as Au, Ag in ancient bronze indicates that the ancient metallurgists had been interested in role of these metals on sound quality of bronze artifacts. Especially, the concentrations of As in many samples are very high even at about 10%. This gives an evidence that in ancient time the humankind could use bronze As alloy in order to improve quality when they had produced bronze artifacts. (author)

DEGRADATION WORKS OF MONUMENTAL ART CAST BRONZE UNDER THE INFLUENCE OF ENVIRONMENTAL FACTORS

Directory of Open Access Journals (Sweden)

Delia NICA-BADEA

2012-11-01

Full Text Available Intensive pollution, combined with the lack of conservation of monuments exposed to these environments make the main cause of deterioration of cultural objects to atmospheric corrosion metal. This paper proposes a study of the main factors leading to degradation Bronze alloy, cast bronze monuments exposed to open atmosphere: corrosive environmental factors, stability and products of corrosion of bronze. In general, all corrosion products present on a metal surface are indicated as 'skate', can be composed of single-layer or multilayer products. The paper also includes a case study on the influence of environmental factors on degradation Matthias monument statue in Cluj-Napoca, Romania. Visual inspection of the monument informs us that have white spots, gray, reddish not consistent with the base color green patina, surfaces showing depigmentation, the rain washed areas, crystallization, deposition of air-borne particles.

Elemental analysis of ancient Chinese bronze artifacts with external-beam PIXE

International Nuclear Information System (INIS)

Lin, E.K.; Yu, Y.C.; Wang, C.W.; Shen, C.T.; Huang, Y.M.; Wu, S.C.; Hsieh, C.H.

1992-01-01

External-beam PIXE has been applied for the determination of the elemental composition of ancient Chinese bronze artifacts. Characteristic x-ray spectra from the samples bombarded with protons of 3 MeV have been measured with a HPGe detector. At each sample three spots were irradiated per run. Results of measurements on three fragments of bronze drinking vessels and helmet of Chinese ancient Chou and Shang dynasties (17th-8th century B.C.) are presented. To check the analytical method, we have also made measurements on the elemental composition of some modern coins. The results are discussed. (author)

Elemental analysis of ancient Chinese bronze artifacts with external-beam PIXE

Energy Technology Data Exchange (ETDEWEB)

Lin, E.K.; Yu, Y.C.; Wang, C.W.; Shen, C.T.; Huang, Y.M.; Wu, S.C.; Hsieh, C.H. [Academia Sinica, Taipei, TW (China). Inst. of Physics

1992-12-31

External-beam PIXE has been applied for the determination of the elemental composition of ancient Chinese bronze artifacts. Characteristic x-ray spectra from the samples bombarded with protons of 3 MeV have been measured with a HPGe detector. At each sample three spots were irradiated per run. Results of measurements on three fragments of bronze drinking vessels and helmet of Chinese ancient Chou and Shang dynasties (17th-8th century B.C.) are presented. To check the analytical method, we have also made measurements on the elemental composition of some modern coins. The results are discussed. (author).

Quantitative multiphase analysis of archaeological bronzes by neutron diffraction

CERN Document Server

Siano, S; Celli, M; Pini, R; Salimbeni, R; Zoppi, M; Kockelmann, W A; Iozzo, M; Miccio, M; Moze, O

2002-01-01

In this paper, we report the first investigation on the potentials of neutron diffraction to characterize archaeological bronze artifacts. The preliminary feasibility of phase and structural analysis was demonstrated on standardised specimens with a typical bronze alloy composition. These were realised through different hardening and annealing cycles, simulating possible ancient working techniques. The Bragg peak widths that resulted were strictly dependent on the working treatment, thus providing an important analytical element to investigate ancient making techniques. The diagnostic criteria developed on the standardised specimens were then applied to study two Etruscan museum pieces. Quantitative multiphase analysis by Rietveld refinement of the diffraction patterns was successfully demonstrated. Furthermore, the analysis of patterns associated with different artifact elements also yielded evidence for some peculiar perspective of the neutron diffraction diagnostics in archeometric applications. (orig.)

Positron annihilation in sodium and copper β-vanadium oxide bronzes

International Nuclear Information System (INIS)

Dryzek, J.; Rogowska, E.

1990-01-01

Studies of copper and sodium β-vanadium oxide bronzes are performed using positron annihilation measured with a long slit angular correlation apparatus. The dependences of peak coincidence rate on temperature (40 to 310deg C) are obtained for different concentrations of donor atoms in the case of copper vanadium oxide bronzes. A three-states model corresponding to the annihilation of positrons in donor atom sublattice is applied for the description of the experimental data. The creation enthalpy of vacancies for that sublattice is equal to (0.60 ± 0.01) eV for Na 0.33 V 2 O 5 and equal to (0.64 ± 0.01) eV for Cu x V 2 O 5 . (author)

Highly Stable Aqueous Zinc-ion Storage Using Layered Calcium Vanadium Oxide Bronze Cathode

KAUST Repository

Xia, Chuan; Guo, Jing; Li, Peng; Zhang, Xixiang; Alshareef, Husam N.

2018-01-01

Cost-effective aqueous rechargeable batteries are attractive alternatives to non-aqueous cells for stationary grid energy storage. Among different aqueous cells, zinc-ion batteries (ZIBs), based on Zn2+ intercalation chemistry, stand out as they can employ high-capacity Zn metal as anode material. Herein, we report a layered calcium vanadium oxide bronze as cathode material for aqueous Zn batteries. For the storage of Zn2+ ions in aqueous electrolyte, we demonstrate that calcium based bronze structure can deliver a high capacity of 340 mAh g-1 at 0.2 C, good rate capability and very long cycling life (96% retention after 3000 cycles at 80 C). Further, we investigate the Zn2+ storage mechanism, and the corresponding electrochemical kinetics in this bronze cathode. Finally, we show that our Zn cell delivers an energy density of 267 Wh kg-1 at a power density of 53.4 W kg-1.

Highly Stable Aqueous Zinc-ion Storage Using Layered Calcium Vanadium Oxide Bronze Cathode

KAUST Repository

Xia, Chuan

2018-02-12

Cost-effective aqueous rechargeable batteries are attractive alternatives to non-aqueous cells for stationary grid energy storage. Among different aqueous cells, zinc-ion batteries (ZIBs), based on Zn2+ intercalation chemistry, stand out as they can employ high-capacity Zn metal as anode material. Herein, we report a layered calcium vanadium oxide bronze as cathode material for aqueous Zn batteries. For the storage of Zn2+ ions in aqueous electrolyte, we demonstrate that calcium based bronze structure can deliver a high capacity of 340 mAh g-1 at 0.2 C, good rate capability and very long cycling life (96% retention after 3000 cycles at 80 C). Further, we investigate the Zn2+ storage mechanism, and the corresponding electrochemical kinetics in this bronze cathode. Finally, we show that our Zn cell delivers an energy density of 267 Wh kg-1 at a power density of 53.4 W kg-1.

The Study Into Potential Enhacement Of Metalworking Fluids Biodegradability By The Application Of O3/UV

Directory of Open Access Journals (Sweden)

Gerulová Kristína

2015-06-01

Full Text Available The increase in mineralization and biodegradability of MWFs by ozone/ultraviolet in comparison with ozone were investigated. Studied were two similar synthetic fluids pre-treated by the combination of the O3/UV advanced oxidative method. Expectations that the pre-treatment could enhance biodegradability of the metalworking fluid were not confirmed. The combined oxidation process at the defined conditions resulted in 1-35 % decrease of the achieved primary degradation level. Samples were prepared from real concentrates and diluted to approximately 350 mg/L of TOC.

A distinct section of the Early Bronze Age society? Stable isotope investigations of burials in settlement pits and multiple inhumations of the Únětice culture in central Germany.

Science.gov (United States)

Knipper, Corina; Fragata, Matthias; Nicklisch, Nicole; Siebert, Angelina; Szécsényi-Nagy, Anna; Hubensack, Vera; Metzner-Nebelsick, Carola; Meller, Harald; Alt, Kurt W

2016-03-01

Inhumations in so-called settlement pits and multiple interments are subordinate burial practices of the Early Bronze Age Únětice culture in central Germany (2200-1700/1650 BC). The majority of the Únětice population was entombed as single inhumations in rectangular grave pits with a normative position of the body. The goal of the study was to test archaeological hypotheses that the deviant burials may represent socially distinct or nonlocal individuals. The study comprised up to two teeth and one bone each of 74 human individuals from eight sites and faunal comparative samples. The inhumations included regular, deviant burials in so-called settlement or storage pits, and multiple burials. We investigated radiogenic strontium isotope compositions of tooth enamel ((87) Sr/(86) Sr) and light stable isotope ratios of carbon and nitrogen of bone collagen (δ(13) C, δ(15) N) aiming at the disclosure of residential changes and dietary patterns. Site-specific strontium isotope data ranges mirror different geological properties including calcareous bedrock, loess, and glacial till. Independent from burial types, they disclose low portions of nonlocal individuals of up to some 20% at the individual sites. The light stable isotope ratios of burials in settlement pits and rectangular graves overlap widely and indicate highly similar dietary habits. The analytical results let to conclude that inhumations in settlement pits and multiple burials were two of the manifold burial practices of the Early Bronze Age. The selection criteria of the individuals for the different forms of inhumation remained undisclosed. © 2015 Wiley Periodicals, Inc.

Technological and stylistic evaluation of the Early Bronze Age pottery at Tarsus-Gozlukule, Turkey: Pottery production and its interaction with economic, social, and cultural spheres

Science.gov (United States)

Unlu, Elif

This dissertation presents a technological and stylistic assessment of Early Bronze Age pottery production at Tarsus-Gozlukule, a multi-period mound settlement located in the Cilician Plain in southern Turkey. Pottery production, like all other man-made objects, is firstly a technological act. This dissertation maintains that material style (involving formal, technical, and decorative choices expressed by the artisan) of an artifact should be investigated as a whole as such an integrative study would be the most adequate way of understanding economic circumstances, social representation, and cultural boundaries. To facilitate this integrative investigation, seventy-two samples of Early Bronze Age pottery excavated from Tarsus-Gozlukule in the 1930s and 1940s.were selected for mineralogical, morphological, and chemical analyses. Petrographic and powder X-Ray Diffraction analyses were performed to determine the mineralogical makeup, Environmental Scanning Electron Microscope imagery was used to determine the morphology of these samples, and semi-quantitave Energy Dispersive X-Ray Spectroscopy analysis was performed on some samples to determine chemical properties of the clays. As a result of these scientific analyses various fabric groups were established. Afterwards formal shape and stylistic analysis was performed where shapes and surface treatments of the samples were analyzed and compared to the known local and non-local examples. Such an integrative approach to pottery production facilitates a better definition of the local pottery production process and enables an assessment of the technological know-how of the local pottery producers, their labor organization and its role within the operating markets, their function within the sociopolitical structure, and how such issues relate to the cultural boundaries within the community. Defining the paradigm of the local pottery production process leads to a broader investigation of issues related to the technological

Pressure Effects on Solid State Phase Transformation of Aluminium Bronze in Cooling Process

International Nuclear Information System (INIS)

Hai-Yan, Wang; Jian-Hua, Liu; Gui-Rong, Peng; Yan, Chen; Yu-Wen, Liu; Fei, Li; Wen-Kui, Wang

2009-01-01

Effects of high pressure (6 GPa) on the solid state phase transformation kinetic parameters of aluminum bronze during the cooling process are investigated, based on the measurement and calculation of its solid state phase transformation temperature, duration and activation energy and the observation of its microstructures. The results show that high pressure treatment can reduce the solid phase transformation temperature and activation energy in the cooling process and can shorten the phase transformation duration, which is favorable when forming fine-grained aluminum bronze

The use of fan scrapers: Microwear evidence from Late Pottery Neolithic and Early Bronze Age, Ein Zippori, Israel

Directory of Open Access Journals (Sweden)

Richard W. Yerkes

2016-09-01

Full Text Available The results of a microwear analysis of samples of fan scrapers and fan scrapers spalls from late Pottery Neolithic (PN and Early Bronze Age (EBA occupation layers at Ein Zippori, Lower Galilee, Israel are presented. The goal of the microwear analysis was to determine the function of the fan scrapers and compare the visible usewear on the scrapers found in late PN and EBA lithic assemblages. The results indicate that during both periods most of the fan scrapers were used to skin and butcher animals, while some were also used for hide processing and bone working. The working edges of the fan scrapers had sharp, moderate, or steep edge-angles, and different edges were used for different tasks. Edges with microwear from scraping meat, bone, and hides (including some hides that may have been treated with abrasives had steep edge-angles, while there were moderate or sharp edge-angles on the edges of fan scrapers used for cutting. Two sub-types of fan scrapers were identified, flat cortex fan scrapers (FCFS, and cortical fan scrapers (CFS with convex dorsal faces. The CFS were abundant in PN contexts, while the FCFS were more common in EBA layers. However both of the sub-types had similar microwear traces.

Cultural Changes and Chronology from the Transition Late Bronze to Iron Age in Palestine: New Evidence from Tell Abu al-Kharaz, Jordan Valley

International Nuclear Information System (INIS)

Fischer, P. M.

2012-01-01

The 12th century BCE was a period of turmoil in the Southern Levant. The Canaanite Late Bronze Age culture - during several hundred years dominated by Egypt - received quite abruptly strong influences from the Eastern Mediterranean. The bearer of these new cultural elements, the so called Sea Peoples who included the Philistines, settled in Palestine after attacking Egypt. The changes that took place in Palestine are best reflected in the material culture which demonstrates Aegean and Cypriote elements. The exact date of their arrival in Palestine is a matter of recurrent discussion but the majority of scholars agree that it happened in the 12th century BCE. Philistine culture is usually associated with the area around today's Gaza. Nevertheless, the current excavations at Tell Abu al- Kharaz in the Transjordanian Jordan Valley provide evidence of Eastern Mediterranean/Philistine culture and a number of radiocarbon dates from first class find contexts. (author)

New evidence on the health hazards and control of metalworking fluids since completion of the OSHA advisory committee report.

Science.gov (United States)

Mirer, Franklin E

2010-08-01

Metalworking fluids (MWF) are used in the manufacture of engines, transmissions, chassis parts and other products. In 2003, OSHA denied a union petition to promulgate a standard for MWF. The 3rd Circuit Court of Appeals rejected a union lawsuit to compel OSHA to regulate MWF. OSHA relied exclusively on the 1999 Metal Working Fluids Standards Advisory Committee report, therefore, only evidence available before 1999 was quoted supporting the denial. This review was conducted to identify studies published since 1998. Electronic reference sources were queried for the terms for metalworking fluids, machining fluids, cutting fluids, cutting oils, coolants, machining, and machinist. All items returned were reviewed for relevance to MWF regulation. The review noted 227 reports in the peer reviewed literature directly relevant to regulation of MWF exposures. Of these, 26 addressed cancer; 58 respiratory effects; 32 skin effects or absorption; 45 microbial contaminants; and 76 exposure measurements and controls. Three major studies identified excess cancer including lung, liver, pancreatic, laryngeal, and leukemia associated with MWF exposures. Reports strengthened associations of asthma and hypersensitivity pneumonitis with recent exposure to MWF. Material new evidence demonstrates significant risks to material impairment of health at prevailing exposure levels and feasibility of lower exposure limits. Copyright 2010 Wiley-Liss, Inc.

The origin of Scythian caldrons in the context of the late Bronze − Early Iron Age of Eurasia

Directory of Open Access Journals (Sweden)

Romashko, O. V.

2017-09-01

Full Text Available A detailed analysis of the historiography of the issue is presented, which takes into account works devoted to the antiquities of the early Iron Age. The authors come to the conclusion about the local production of Scythian metal boilers, seeing in this a very high level of development of metalworking of Scythian masters. With regard to the issue associated with the origin of the tradition of manufacturing these products, then in the historiography there were two theories: the Asian (L. N. Chlenova, S. V. Demidenko, V. S. Bochkarev, etc. and native (O. A. Krivtsova-Grakova and others. In our opinion, the question of the origin of boilers should be considered taking into account the specific features of their morphology. Thus, open-shell boilers that dominate the archaic times (VII−VI centuries BC are made taking into account the clearly formulated traditions and requirements for products of this category brought from the East to the Northern Black Sea Coast. Regarding the boilers with closed housing, which begin to appear in the VI century BC, we can say the following. Their production originates in the local traditions of the production of boilers, which were formed back in Cimmerian times (riveted boilers. But these traditions do not receive a direct line of development in Scythian time. We see rather complicated processes of formation of the Scythian center for the production of archaic cast caldrons in the Kuban region, where this tradition spreads throughout the Northern Black Sea Coast. In the course of this complex and multifaceted process, new syncretic traditions of the production of boilers are formed, combining the innovative method of production (casting and the local traditions of perception of the shape of the caldron.

Elemental analysis of bronze artifacts by muonic X-ray spectroscopy

International Nuclear Information System (INIS)

Ninomiya, Kazuhiko; Shinohara, Atsushi; Kubo, Michael K.; Strasser, Patrick; Nagatomo, Takashi; Kawamura, Naritoshi; Shimomura, Koichiro; Miyake, Yasuhiro; Kobayashi, Yoshio; Ishida, Katsuhiko; Higemoto, Wataru; Suzuki, Takao; Saito, Tsutomu

2015-01-01

A quantitative and multi-elemental analysis method for bulk samples based on muonic X-ray spectroscopy was applied to bronze artifacts (Tempo-Tsuho coins and a Seiun-kyo mirror). This method is based on the measurement of the characteristic high-energy muonic X-rays emitted in a sample after muon irradiation. The elemental compositions of these bronze artifacts were determined from muonic X-ray intensities in a non-destructive manner, using the relation between the muonic X-ray intensity and the elemental composition of the Cu–Sn–Pb alloy system. The analyzed values agreed well with those determined by X-ray fluorescence spectroscopy. We also estimated the detection limit of this method in the present experimental setup as 0.81 wt% of the background signal of the muonic X-ray spectra. (author)

Application of microjet in heat treatment of aluminium bronzes

Directory of Open Access Journals (Sweden)

Z. Górny

2011-04-01

Full Text Available Mechanical properties of a CuAl10Fe4Ni4 bronze subjected to solution heat treatment and toughening were examined. In solution heattreatment, a microjet was used to raise the cooling rate. A slight increase of mechanical properties was observed.

青铜乐器自名研究%A Study of the Names Inscribed on Bronze Musical Instruments

Institute of Scientific and Technical Information of China (English)

陈双新

2001-01-01

Based on his studies of the bronze musical instruments, the author analyses the inscriptions referring the self-named modifiers and tries to give them new explanations. The study is important to understand the function and values of the bronze musical instruments.

Non-invasive chemical and phase analysis of Roman bronze artefacts from Thamusida (Morocco)

Energy Technology Data Exchange (ETDEWEB)

Gliozzo, Elisabetta, E-mail: gliozzo@unisi.i [Dipartimento di Scienze della Terra, Universita di Siena, via Laterina 8, 53100 Siena (Italy); Arletti, Rossella, E-mail: rarletti@unimore.i [Dipartimento di Scienze della Terra, Universita di Modena e Reggio Emilia, Largo S. Eufemia 19, 41100 Modena (Italy); Cartechini, Laura, E-mail: laura@thch.unipg.i [Istituto di Scienze e Tecnologie Molecolari del CNR (CNR-ISTM), c/o Dipartimento di Chimica, Universita di Perugia, via Elce di Sotto 8, 06123 Perugia (Italy); Dipartimento di Chimica, Universita di Perugia, via Elce di Sotto 8, 06123 Perugia (Italy); Imberti, Silvia, E-mail: Silvia.Imberti@stfc.ac.u [Science and Technology Facilities Council, Rutherford Appleton Laboratory, Harwell Science and Innovation Campus, Didcot, OX11 0QX (United Kingdom); Kockelmann, Winfried A., E-mail: Winfried.Kockelmann@stfc.ac.u [Science and Technology Facilities Council, Rutherford Appleton Laboratory, Harwell Science and Innovation Campus, Didcot, OX11 0QX (United Kingdom); Memmi, Isabella, E-mail: memmi@unisi.i [Dipartimento di Scienze della Terra, Universita di Siena, via Laterina 8, 53100 Siena (Italy); Rinaldi, Romano, E-mail: rrinaldi@unipg.i [Dipartimento di Chimica, Universita di Perugia, via Elce di Sotto 8, 06123 Perugia (Italy); Tykot, Robert H., E-mail: rtykot@cas.usf.ed [Department of Anthropology, University of South Florida, Tampa, FL 33620 (United States)

2010-12-15

A repertory of Roman military bronze equipment (1st- 3rd century AD) found at the archaeological site of Thamusida (Rabat, Morocco) was analysed by non-destructive X-ray fluorescence and time of flight neutron diffraction (TOF-ND). Most objects are made of leaded alloys, where copper is combined with tin and/or zinc and, in six cases, to arsenic as well. A mixed technology was employed, making a limited use of 'pure' semi-finished materials if compared with the large utilization of recycled materials (brass and bronze).

Surface characterization of a corroded bronze-leaded alloy in a salt spray cabinet

International Nuclear Information System (INIS)

Cura D'Ars de Figueiredo Junior, Joao; Freitas Cunha Lins, Vanessa de; Bellis, Vito Modesto de

2007-01-01

The corrosion products of a TM 23 bronze-leaded alloy (Cu 72%, Pb 15%, Zn 8% and Sn 5%) were obtained in a salt spray cabinet after exposition during 120 h and 1000 h. The products obtained were studied using scanning electron microscopy, energy dispersive spectroscopy, and X-ray diffraction. The major products of bronze-leaded corrosion were oxides and basic salts of Cu, CuCl 2 .3Cu(OH) 2 , and Pb, Pb(OH)Cl. The results can be attributed to a kinetic control of the corrosion reactions

Examination of Ife Bronze Casting Culture and Its Decline in ...

African Journals Online (AJOL)

DrNneka

civilization and culture, education, science and technology. ... to set up bronze casting industry to promote the commercial culture in the history of. Ife. ..... the development of science and technological advancement, while to others; it is the.

Aromatic quinoxaline as corrosion inhibitor for bronze in aqueous ...

Indian Academy of Sciences (India)

Administrator

These compounds act through the formation of a protective film on the surface of the ... Bronze; inhibitors; quinoxalin compounds; chloride solution; electrochemical studies. 1. ... elements such as aluminum, nickel and iron offer a good ... cations such as pump casting, valves and heat exchanger. ..... to investigate this layer.

Standard formation enthalpies of Nasub(2+x)Vsub(6)Osub(16-y) bronze of kappa type

International Nuclear Information System (INIS)

Khodos, M.Ya.; Slobodin, B.V.; Surat, L.L.; Fotiev, A.A.

1980-01-01

Standard formation enthalpies of sodium oxide vanadium bronze of kappa Nasub(2+x)Vsub(6)Osub(16-y) type of different composition have been determined by the method of solution calorimetry. It has been ascertained that within the limits of homogeneity a standard formation enthalpy decreases insignificantly with the increase of bronze oxygen defectiveness and is a linear function of sodium content

Aging Well

DEFF Research Database (Denmark)

Frieman, Catherine J.; Bruck, Joanna; Rebay-Salisbury, Katharina

2017-01-01

This article consist of several short individual articles which were solicited as responses to and reflections on Paul Treherne’s seminal meditation on Bronze Age male identity and warriorhood. Authors were asked to build on Treherne’s work and to reflect on how it had impacted their own research...

Tamil Chola Bronzes and Swamimalai Legacy: Metal Sources and Archaeotechnology

Science.gov (United States)

Srinivasan, Sharada

2016-08-01

This review explores the great copper alloy image casting traditions of southern India from archaeometallurgical and ethnometallurgical perspectives. The usefulness of lead isotope ratio and compositional analysis in the finger-printing and art historical study of more than 130 early historic, Pallava, Chola, later Chola, and Vijayanagara sculptures (fifth-eighteenth centuries) is highlighted, including Nataraja, Buddha, Parvati, and Rama images made of copper, leaded bronze, brass, and gilt copper. Image casting traditions at Swamimalai in Tamil Nadu are compared with artistic treatises and with the technical examination of medieval bronzes, throwing light on continuities and changes in foundry practices. Western Indian sources could be pinpointed for a couple of medieval images from lead isotope analysis. Slag and archaeometallurgical investigations suggest the exploitation of some copper and lead-silver sources in the Andhra and Karnataka regions in the early historic Satavahana period and point to probable copper sources for the medieval images in Karnataka, Tamil Nadu, and Andhra Pradesh. The general lower iron content in southern Indian bronzes perhaps renders the proximal copper-magnetite reserves of Seruvila in Sri Lanka as a less likely source. Given the lack of lead deposits in Sri Lanka, however, the match of the lead isotope signatures of a well-known Ceylonese Buddhist Tara in British Museum with a Buddha image from Nagapattinam in Tamil Nadu may underscore ties between the island nation and the southern Indian Tamil regions.

Earliest evidence for equid bit wear in the ancient Near East: The "ass" from Early Bronze Age Tell eṣ-Ṣâfi/Gath, Israel.

Science.gov (United States)

Greenfield, Haskel J; Shai, Itzhaq; Greenfield, Tina L; Arnold, Elizabeth R; Brown, Annie; Eliyahu, Adi; Maeir, Aren M

2018-01-01

Analysis of a sacrificed and interred domestic donkey from an Early Bronze Age (EB) IIIB (c. 2800-2600 BCE) domestic residential neighborhood at Tell eṣ-Ṣâfi/Gath, Israel, indicate the presence of bit wear on the Lower Premolar 2 (LPM2). This is the earliest evidence for the use of a bit among early domestic equids, and in particular donkeys, in the Near East. The mesial enamel surfaces on both the right and left LPM2 of the particular donkey in question are slightly worn in a fashion that suggests that a dental bit (metal, bone, wood, etc.) was used to control the animal. Given the secure chronological context of the burial (beneath the floor of an EB IIIB house), it is suggested that this animal provides the earliest evidence for the use of a bit on an early domestic equid from the Near East.

48 CFR 252.216-7000 - Economic price adjustment-basic steel, aluminum, brass, bronze, or copper mill products.

Science.gov (United States)

2010-10-01

...-basic steel, aluminum, brass, bronze, or copper mill products. 252.216-7000 Section 252.216-7000 Federal... adjustment—basic steel, aluminum, brass, bronze, or copper mill products. As prescribed in 216.203-4-70(a... Mill Products (JUL 1997) (a) Definitions. As used in this clause— Established price means a price which...

Effect of bronze on the compression of Nb3Sn in multifilamentary conductors

International Nuclear Information System (INIS)

Rupp, G.

1978-01-01

Nb 3 Sn in multifilamentary conductors is subject to compressive strain as a result of the relatively small thermal contraction of the filaments as compared to bronze. The critical current Isub(c) is consequently degraded. The critical current increases, when an external tensile stress is applied, and passes through a maximum. The ratio of the maximum critical current to the initial critical current increases with the flux density and reaches a value of two at a flux density of 16 T for technical conductors. The strain epsilonsub(m), at which Isub(c) maximum is reached, lies between 0.4% and 0.7% for the conductors investigated and depends on the material parameters. For a constant ratio of bronze to filament cross section this strain epsilonsub(m) is reduced as the Nb 3 Sn layer thickness is increased and can be determined approximately by a graphical method from the stress-strain diagram. Epsilonsub(m) is to a large extent dependent on the metallurgical properties of bronze, which vary to a considerable extent depending upon the heat treatment. (author)

Integrated analytical methodologies for the study of corrosion processes in archaeological bronzes

Energy Technology Data Exchange (ETDEWEB)

Alberghina, Maria Francesca; Barraco, Rosita; Brai, Maria; Schillaci, Tiziano, E-mail: tschillaci@unipa.it; Tranchina, Luigi

2011-02-15

The investigations on structure and micro-chemical composition of archaeological metal alloys are needed in archaeometry. The aim of this study is devoted both to acquire information about their provenance and production technology, and to improve our understanding about the corrosion processes. In this paper we present the study of the corrosion phenomena of bronze samples, laboratory-made according to binary, ternary and quaternary alloys typical of Roman archaeometallurgical production through an integrated methodology based on the use of non or micro invasive physical techniques. Among the analysed samples, two were artificially aged through burial in the archaeological site of Tharros, along the west coast of Sardinia (Italy). The corrosion products, typical of the bronzes in archaeological sites near the sea, have been characterized by non invasive and micro-destructive measurements. In particular, the corrosion patinas were examined through optical microscopy, scanning electron microscopy and microanalysis, X-ray fluorescence and laser ablation spectroscopy. The use of integrated technologies allowed us to determine both the elemental composition and surface morphology of the patina, highlighting the correlation between patina nature and chemical composition of the burial context. Moreover, data obtained by the laser-induced breakdown spectroscopy along the depth profile on the samples, have yielded information about the stratigraphic layers of corrosion products and their growth. Finally, the depth profiles allowed us to verify both the chemical elements constituting the patina, the metal ions constituting the alloy and the occurrence of migration phenomena from bulk to the surface.

Integrated analytical methodologies for the study of corrosion processes in archaeological bronzes

International Nuclear Information System (INIS)

Alberghina, Maria Francesca; Barraco, Rosita; Brai, Maria; Schillaci, Tiziano; Tranchina, Luigi

2011-01-01

The investigations on structure and micro-chemical composition of archaeological metal alloys are needed in archaeometry. The aim of this study is devoted both to acquire information about their provenance and production technology, and to improve our understanding about the corrosion processes. In this paper we present the study of the corrosion phenomena of bronze samples, laboratory-made according to binary, ternary and quaternary alloys typical of Roman archaeometallurgical production through an integrated methodology based on the use of non or micro invasive physical techniques. Among the analysed samples, two were artificially aged through burial in the archaeological site of Tharros, along the west coast of Sardinia (Italy). The corrosion products, typical of the bronzes in archaeological sites near the sea, have been characterized by non invasive and micro-destructive measurements. In particular, the corrosion patinas were examined through optical microscopy, scanning electron microscopy and microanalysis, X-ray fluorescence and laser ablation spectroscopy. The use of integrated technologies allowed us to determine both the elemental composition and surface morphology of the patina, highlighting the correlation between patina nature and chemical composition of the burial context. Moreover, data obtained by the laser-induced breakdown spectroscopy along the depth profile on the samples, have yielded information about the stratigraphic layers of corrosion products and their growth. Finally, the depth profiles allowed us to verify both the chemical elements constituting the patina, the metal ions constituting the alloy and the occurrence of migration phenomena from bulk to the surface.

Foraging behaviour in tadpoles of the bronze frog Rana temporalis ...

Indian Academy of Sciences (India)

Unknown

The ability of bronze frog Rana temporalis tadpoles (pure or mixed parental lines) to ... less of whether they are siblings or non-siblings in a group, which correlates well with ..... Sutherland W J and Parker G A 1992 The relationship between.

Microbial biofilms in water-mixed metalworking fluids; Mikrobielle Biofilme in wassergemischten Kuehlschmierstoffen

Energy Technology Data Exchange (ETDEWEB)

Koch, Thomas [Wisura GmbH, Bremen (Germany)

2013-05-15

The microbial load of water-miscible metalworking fluids (MWF) as well as the hygienic aspects and the cost-related impact on the production process due to the activity of microbes is in the focus of many scientific investigations and documented in the related publications. The majority of this research work is focused on the microbiology of the water body, i.e. with the microbial life in the liquid coolant. The habitat biofilm, i.e. the three-dimensional growth of bacteria and fungi on surfaces of the coolant systems has been scarcely considered. Based on the scientific findings made in the recent years studying biofilms it can be concluded, that the relevant microbial processes for the depletion of the MWF and its recontamination takes predominantly places in biofilms. This paper gives an overview of the structure, the formation and the life in biofilms and represents their relevance in MWF systems. (orig.)

Community Geothermal Technology Program: Silica bronze project. Final report

Energy Technology Data Exchange (ETDEWEB)

Bianchini, H.

1989-10-01

Objective was to incorporate waste silica from the HGP-A geothermal well in Pohoiki with other refractory materials for investment casting of bronze sculpture. The best composition for casting is about 50% silica, 25% red cinders, and 25% brick dust; remaining ingredient is a binder, such as plaster and water.

Acute respiratory effects on workers exposed to metalworking fluid aerosols in an automotive transmission plant.

Science.gov (United States)

Robins, T; Seixas, N; Franzblau, A; Abrams, L; Minick, S; Burge, H; Schork, M A

1997-05-01

Exposure to metalworking fluids has been linked to modest cross-shift reductions in FEV1 and occupational asthma. To identify responsible agents, we measured personal exposures to thoracic particulate (TP), viable plus nonviable thoracic bacteria (BAC), and vapor phase nicotine (VPN) (as a surrogate for tobacco particulate) among 83 machinists exposed to soluble oils and 46 dry assemblers working in an automotive transmission machining plant using biocides infrequently. The participants completed interviews and performed pre- and postshift spirometry on Monday and Thursday of the same week in each of three rounds of data collection (June 1992, January 1993, June 1993). Generalized estimating equations were used to combine information across rounds in multiple regression models of cross-shift and cross-week changes in forced expiratory volume, I second (FEV1) and forced vital capacity (FVC). Mean seniority was 19 years among machinists. Mean personal TP levels were 0.41 mg/m3 in machinists and 0.13 mg/m3 in assemblers. Six of the 83 machinists and none of the 46 assemblers experienced a greater than 19% cross-shift decrement in FEV1 or FVC at least once (p = .07). In regression models using either TP or BAC, among subjects with lower baseline (Monday preshift) FEV1/FVC ratios, increasing exposure was significantly associated with increasing cross-shift decrements in FEV1 and FVC in linear models, and with increased likelihood of a 10% or greater cross-shift decrement in FEV1 or FVC in logistic models. Adjustment of TP for VPN did not affect models significantly. We conclude that clinically important cross-shift decrements in pulmonary function are associated with exposure to metalworking fluid aerosols within a high-seniority population.

Friction Stir Processing Parameters and Property Distributions in Cast Nickel Aluminum Bronze

National Research Council Canada - National Science Library

Rosemark, Brian P

2006-01-01

Cast nickel-aluminum bronze (NAB) alloy is specified for many marine applications, including ship propellers, due to its excellent corrosion-resistance combined with acceptable mechanical properties...

QUALITY OF LIFE AT WORK: A STUDY OF WORKERS IN THE METALWORKING INDUSTRY IN THE MIDWEST OF SANTA CATARINA

OpenAIRE

G. Lunardelli; E. F. Souza; T. M. S. N. Nodari

2017-01-01

This study aimed to evaluate the quality of life of workers in the metalworking industry in the middle west of Santa Catarina. Therefore, we opted for a qualitative approach to know the aspects that guide and characterize female employment in the labor market, and was carried out a survey to know the reality faced by this group. It is important to emphasize the importance of companies adopt different methods and practices to adapt the working environment and conditions provide rights similar ...

The inhibition effect and mechanism of L-cysteine on the corrosion of bronze covered with a CuCl patina

International Nuclear Information System (INIS)

Wang, Tianran; Wang, Julin; Wu, Yuqing

2015-01-01

Highlights: • CuCl patina was synthesized on bronze electrodes with electrochemical method. • L-cysteine was used as a green inhibitor for bronze covered with CuCl patina. • The inhibition efficiency reached above 90%. • The inhibition mechanism of L-cysteine on CuCl patina was investigated. - Abstract: CuCl patina was synthesized on bronze electrodes with electrochemical method. The inhibition effect and mechanism of L-cysteine (Cys) on bronze covered with CuCl patina have been studied with electrochemical impedance spectroscopy (EIS) and X-ray photoelectron spectroscopy (XPS) techniques. The EIS results show that Cys stabilized the CuCl patina to a great extent. The hydrolysis reaction of CuCl was inhibited effectively and an inhibition efficiency of over 90% was achieved. The XPS analyses indicate that the chemisorption of Cys molecules on CuCl surface occurred through sulfur atom in thiol and nitrogen atom in amino group

Determination of the elemental composition of copper and bronze objects by neutron activation analysis

International Nuclear Information System (INIS)

Hoelttae, P.; Rosenberg, R.J.

1986-01-01

A method for the elemental analysis of copper and bronze objects is described. Na, Co, Ni, Cu, Zn, As, Ag, Sn, Sb, W, Ir and Au are determined through instrumental neutron activation analysis. Mg, Al, V, Ti and Mn are determined after chemical separation using anionic exchange. The detection limits for a number of other elements are also given. Results for NBS standard reference materials are presented and the results compared with the recommended values. The agreement is good. The results of the analysis of five ancient bronze and two copper objects are presented. (author)

High-pressure synthesis of fully occupied tetragonal and cubic tungsten bronze oxides

Energy Technology Data Exchange (ETDEWEB)

Ikeuchi, Yuya; Takatsu, Hiroshi; Tassel, Cedric; Goto, Yoshihiro; Murakami, Taito; Kageyama, Hiroshi [Graduate School of Engineering, Kyoto University (Japan)

2017-05-15

A high-pressure reaction yielded the fully occupied tetragonal tungsten bronze K{sub 3}W{sub 5}O{sub 15} (K{sub 0.6}WO{sub 3}). The terminal phase shows an unusual transport property featuring slightly negative temperature-dependence in resistivity (dρ/dT<0) and a large Wilson ratio of R{sub W}=3.2. Such anomalous metallic behavior possibly arises from the low-dimensional electronic structure with a van Hove singularity at the Fermi level and/or from enhanced magnetic fluctuations by geometrical frustration of the tungsten sublattice. The asymmetric nature of the tetragonal tungsten bronze K{sub x}WO{sub 3}-K{sub 0.6-y}Ba{sub y}WO{sub 3} phase diagram implies that superconductivity for x≤0.45 originates from the lattice instability because of potassium deficiency. A cubic perovskite KWO{sub 3} phase was also identified as a line phase - in marked contrast to Na{sub x}WO{sub 3} and Li{sub x}WO{sub 3} with varying quantities of x (<1). This study presents a versatile method by which the solubility limit of tungsten bronze oxides can be extended. (copyright 2017 Wiley-VCH Verlag GmbH and Co. KGaA, Weinheim)

The Metallurgy of the Sicilian Final Bronze Age/Early Iron Age necropolis of Madonna del Piano (Catania, Sicily

Directory of Open Access Journals (Sweden)

Giumlia-Mair, Alessandra

2010-12-01

Full Text Available This paper presents the analysis results of the copper- based finds, from the important Sicilian necropolis of Madonna del Piano, near Grammichele (Catania, dated between the local Final Bronze Age 2 and the Early Iron Age IA. 122 copper-based finds from the 273 graves (1970-71 of the large cemetery have been analysed. The sampled objects belong to different classes, there are for instance weapons of offence and defence, such as swords and greaves, small decorative objects for personal use, such as rings, fibulae, belt hooks, belt decorations, and small tools, such as the knives used by women, reels, needles and razors, but also small functional parts, such as rivets and nails, repairs and even a kind of musical instrument, such as the tintinnabula. The methods employed were AAS and SEM, where possible, and XRF in all cases. The aim of the research was that of evaluating the skill of the local artisans, of determining the most common copper-based alloys in use in Sicily in this period and comparing the data with the analysis results of contemporary groups of finds from other areas of the Italian peninsula and from other European regions.

El artículo presenta el resultado de los análisis realizados a los metales de base cobre de la importante necrópolis siciliana de Madonna del Piano, próxima a Grammichele (Catania, fechada entre el Bronce Final 2 y la Primera Edad del Hierro IA. Se han estudiado un total de 122 objetos de base cobre procedentes de 273 tumbas excavadas entre 1970 y 1971. Los objetos muestreados pertenecen a diferentes tipos, armas ofensivas y defensivas tales como espadas y grebas, pequeños objetos de uso personal como anillos, fíbulas, broches de cinturón y pequeñas herramientas como cuchillos usados por las mujeres, carretes, agujas, navajas, pero también elementos funcionales como remaches, clavos y un tipo de instrumento como el tintinábulo. Los métodos de análisis utilizados fueron AAS y SEM, cuando fue

Release of copper from sintered tungsten-bronze shot under different pH conditions and its potential toxicity to aquatic organisms

International Nuclear Information System (INIS)

Thomas, Vernon G.; Santore, Robert C.; McGill, Ian

2007-01-01

Sintered tungsten-bronze is a new substitute for lead shot, and is about to be deposited in and around the wetlands of North America. This material contains copper in the alloyed form of bronze. This in vitro study was performed according to U.S. Fish and Wildlife Service criteria to determine the dissolution rate of copper from the shot, and to assess the toxic risk that it may present to aquatic organisms. The dissolution of copper from tungsten-bronze shot, pure copper shot, and glass beads was measured in a buffered, moderately hard, synthetic water of pH 5.5, 6.6, and 7.8 over a 28-day period. The dissolution of copper from both the control copper shot and the tungsten-bronze shot was affected significantly by the pH of the water and the duration of dissolution (all p values < 0.000). The rate of copper release from tungsten bronze shot was 30 to 50 times lower than that from the copper shot, depending on pH (p < 0.0000). The observed expected environmental concentration of copper released from tungsten-bronze shot after 28 days was 0.02 μg/L at pH 7.8, and 0.4 μg/L at pH 5.6, using a loading and exposure scenario specific in a U.S. Fish and Wildlife Service protocol. Ratio Quotient values derived from the highest EEC observed in this study (0.4 μg/L), and the copper toxic effect levels for all aquatic species listed in the U.S. Environmental Protection Agency ambient water quality criteria database, were all far less than the 0.1 criterion value. Given the conditions stipulated by the U.S. Fish and Wildlife Service and the U.S. Environmental Protection Agency, heavy loading from discharged tungsten-bronze shot would not pose a toxic risk to potable water, or to soil. Consequently, it would appear that no toxic risks to aquatic organisms will attend the use of tungsten-bronze shot of the approved composition. Given the likelihood that sintered tungsten-bronze of the same formula will be used for fishing weights, bullets, and wheel balance weights, it is

7 CFR 51.1145 - U.S. No. 1 Bronze.

Science.gov (United States)

2010-01-01

...) Internal quality: Lots meeting the internal requirements for “U.S. Grade AA Juice (Double A)” or “U.S... 7 Agriculture 2 2010-01-01 2010-01-01 false U.S. No. 1 Bronze. 51.1145 Section 51.1145 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing...

Study on acoustical properties of sintered bronze porous material for transient exhaust noise of pneumatic system

Science.gov (United States)

Li, Jingxiang; Zhao, Shengdun; Ishihara, Kunihiko

2013-05-01

A novel approach is presented to study the acoustical properties of sintered bronze material, especially used to suppress the transient noise generated by the pneumatic exhaust of pneumatic friction clutch and brake (PFC/B) systems. The transient exhaust noise is impulsive and harmful due to the large sound pressure level (SPL) that has high-frequency. In this paper, the exhaust noise is related to the transient impulsive exhaust, which is described by a one-dimensional aerodynamic model combining with a pressure drop expression of the Ergun equation. A relation of flow parameters and sound source is set up. Additionally, the piston acoustic source approximation of sintered bronze silencer with cylindrical geometry is presented to predict SPL spectrum at a far-field observation point. A semi-phenomenological model is introduced to analyze the sound propagation and reduction in the sintered bronze materials assumed as an equivalent fluid with rigid frame. Experiment results under different initial cylinder pressures are shown to corroborate the validity of the proposed aerodynamic model. In addition, the calculated sound pressures according to the equivalent sound source are compared with the measured noise signals both in time-domain and frequency-domain. Influences of porosity of the sintered bronze material are also discussed.

Medical image registration algorithms assesment Bronze Standard application enactment on grids using the MOTEUR workflow engine

CERN Document Server

Glatard, T; Pennec, X

2006-01-01

Medical image registration is pre-processing needed for many medical image analysis procedures. A very large number of registration algorithms are available today, but their performance is often not known and very difficult to assess due to the lack of gold standard. The Bronze Standard algorithm is a very data and compute intensive statistical approach for quantifying registration algorithms accuracy. In this paper, we describe the Bronze Standard application and we discuss the need for grids to tackle such computations on medical image databases. We demonstrate MOTEUR, a service-based workflow engine optimized for dealing with data intensive applications. MOTEUR eases the enactment of the Bronze Standard and similar applications on the EGEE production grid infrastructure. It is a generic workflow engine, based on current standards and freely available, that can be used to instrument legacy application code at low cost.

Fish remnants from the excavations of the Bronze Age barrow near Maryanskoe village (Dnepropetrovsk region, Ukraine

Directory of Open Access Journals (Sweden)

O. M. Kovalchuk

2014-10-01

Full Text Available The Bronze Age mound (2.5–2.3 kya BC is located near the Maryanskoe village (Apostolovskyi district, Dnepropetrovsk region and was excavated in 1953. The results of determination of the fish remnants, which were found during the excavation, are presented in the paper. Eleven species belonging to 9 genera, 5 families and 5 orders (Acipenseriformes, Cypriniformes, Siluriformes, Esociformes, Perciformes were identified: russian sturgeon Acipenser gueldenstaedtii Brandt et Ratzeburg, 1833, stellate sturgeon A. stellatus Pallas, 1771, common ide Idus idus (Linnaeus, 1758, common roach Rutilus rutilus (Linnaeus, 1758, pontic roach R. frisii (Nordmann, 1840, common bream Abramis brama (Linnaeus, 1758, common carp Cyprinus carpio Linnaeus, 1758, tench Tinca tinca (Linnaeus, 1758, european catfish Silurus glanis Linnaeus, 1758, northern pike Esox lucius (Linnaeus, 1758, and zander Sander lucioperca (Linnaeus, 1758. Most of them are quite common in the Dnieper river basin. It was found that carp fishes predominate in the number of species. Most of the bone remnants in the collection belong to zander, catfish and pike, while common roach, pontic roach and common bream are identified by the few bones. This may indicate a different role of these species in the diet of the local population. The ratio of skeletal elements in the collection is the evidence of the fish cutting on the site. Body length and weight was reconstructed for 64 fish specimens. It was found that they were mature and small-sized, except for catfish, pike and perch. Taking into account the characteristics of the funeral rituals of the Yamna culture population, fish bones from the mound near Maryanskoe can be remnants of the parting meal.

Correlation of mechanical properties with nondestructive evaluation of babbitt metal/bronze composite interface

Science.gov (United States)

Ijiri, Y.; Liaw, P. K.; Taszarek, B. J.; Frohlich, S.; Gungor, M. N.

1988-09-01

Interfaces of the babbitt metal-bronze composite were examined ultrasonically and were fractured using the Chalmers test method. It was found that the ultrasonic results correlated with the bond strength, the ductility, and the degree of bonding at the tested interface. Specifically, high ultrasonic reflection percentages were associated with low bond strength, low ductility, and low percentages of bonded regions. The fracture mechanism in the bonded area of the babbitt-bronze interface is related to the presence of the intermetallic compound, Cu6Sn5, at the interface. It is suggested that the non-destructive ultrasonic technique can detect the bond integrity of babbitted metals.

Highly stable aqueous zinc-ion storage using a layered calcium vanadium oxide bronze cathode

Energy Technology Data Exchange (ETDEWEB)

Xia, Chuan; Guo, Jing; Li, Peng; Zhang, Xixiang; Alshareef, Husam N. [Materials Science and Engineering, King Abdullah University of Science and Technology (KAUST), Thuwal (Saudi Arabia)

2018-04-03

Cost-effective aqueous rechargeable batteries are attractive alternatives to non-aqueous cells for stationary grid energy storage. Among different aqueous cells, zinc-ion batteries (ZIBs), based on Zn{sup 2+} intercalation chemistry, stand out as they can employ high-capacity Zn metal as the anode material. Herein, we report a layered calcium vanadium oxide bronze as the cathode material for aqueous Zn batteries. For the storage of the Zn{sup 2+} ions in the aqueous electrolyte, we demonstrate that the calcium-based bronze structure can deliver a high capacity of 340 mA h g{sup -1} at 0.2 C, good rate capability, and very long cycling life (96 % retention after 3000 cycles at 80 C). Further, we investigate the Zn{sup 2+} storage mechanism, and the corresponding electrochemical kinetics in this bronze cathode. Finally, we show that our Zn cell delivers an energy density of 267 W h kg{sup -1} at a power density of 53.4 W kg{sup -1}. (copyright 2018 Wiley-VCH Verlag GmbH and Co. KGaA, Weinheim)

Performance and Carcass characteristics of broad breasted bronze toms fed radappertized Diet

International Nuclear Information System (INIS)

Farag, El-Din.M.H.; Mohamed, F.A.

1999-01-01

The effect of irradiated complete diets at dose level of 25 KGy was studied in broad breasted bronze tome evaluating their growing performances as well as characteristics of the carcasses. Two experimental groups received irradiated and non irradiated diets for 18 weeks (from the 5 t h to the 23 r d week of age). Four toms per treatment at the age of 23 weeks were slaughtered and the carcass was dissected. Radappertized diets improved body weight gain, feed consumption and feed conversion and reduced mortality rate. No significant differences were observed between toms fed processed and non processed diets on carcasses components, while the gizzard weight was greater for those fed the processed diets. Dressing and drawn weights in toms fed processed diets were 3% higher than in those fed non processed diets. The results suggest that sterilization of turkeys feed may have a beneficial effect on the body weight and deed conversion of turkeys consuming these diets without harmful effect on the bird

Synthesis of new perovskite and ''tetragonal bronze'' materials with thorium

International Nuclear Information System (INIS)

Launay, Suzanne; Erb, Alfred; Freundlich, William

1982-01-01

Disclosure and crystal chemistry study of the solid solutions Th(NbO 3 ) 4 , NaNbO 3 or AgNbO 3 with perovskite structure and Th(Nb, TaO 3 ) 4 , K(Nb,Ta)O 3 with ''tetragonal tungstene bronze'' structure, ''Banana'' type [fr

Determination of the elemental composition of copper and bronze objects by neutron activation analysis

International Nuclear Information System (INIS)

Hoelttae, P.; Rosenberg, R.J.

1987-01-01

A method for the elemental analysis of copper and bronze objects is described. Na, Co, Ni, Cu, Zn, As, Ag, Sn, Sb, W, Ir and Au are determined through instrumental neutron activation analysis. Mg, Al, V, Ti and Mn are determined after chemical separation using anionic exchange. The detection limits for a number of other elements are also given. Results for NBS standard reference materials are presented and the results are compared with the recommended values. The agreement is good. The results of the analysis of five ancient bronze and two copper objects are also presented. (author) 3 refs.; 4 tabs

Linked Climatic, Environmental, and Societal Changes in the Lower Yellow River Area during the Neolithic-Bronze Age Transition

Science.gov (United States)

Yu, S. Y.

2017-12-01

Understanding human-environment interactions during times of large and rapid climatic changes in the second half of the Holocene may deepen our insight into human adaptation and resilience against potential climate anomalies in the future. However, the drivers and societal responses tend to be different from area to area, and the degree and nature of this link are still a matter of debate. Flooding sediments preserved within the cultural stratigraphical context at archaeological sites in the lower Yellow River area may offer an ideal framework for evaluating the association between evolution of Neolithic cultures and climate fluctuations. Here, we present evidence from a mound site for the prevalence of extreme overbank floods during the Neolithic-Bronze Age transition most likely triggered by excessive summer precipitation in the Yellow River valley when prolonged weak El Niño condition prevailed. Repeated flooding during around 4000-3500 cal yr BP substantially modified the floodplain landscape, thereby driving people to disperse to areas dominated by the Erlitou culture and eventually giving rise to a state-level society in central China historiographically identified as the Xia Dynasty. Changes in the drainage network due to repeated flooding also exerted a profound impact on the rice farming-based communities centered in the region of the floods. Our results provide a precise past analogue of the linked climatic, environmental, and societal changes at a time when human societies were evolving into a hierarchy similar to those of today.

Development and manufacturing of bronze-processed Ta-added Nb3Sn wires for the ITER

International Nuclear Information System (INIS)

Kikuchi, Kenichi; Seidou, Masahiro; Iwaki, Genzou; Sakai, Syuuji; Moriai, Hidezumi; Nishi, Masataka; Yoshida, Kiyoshi; Isono, Takaaki; Tsuji, Hiroshi.

1997-01-01

Development work to produce a high-performance Nb 3 Sn superconducting wire for the center solenoid coil of the ITER was carried out. The effects of concurrently adding Ti and Ta to bronze-processed Nb 3 Sn wires were examined. In addition, a high-Sn-concentration bronze matrix was applied. Then, the relation between hysteresis loss and filament diameter was examined. Moreover, the cause of wire breakage during processing was elucidated. As a result, a reliable manufacturing process for high-performance Nb 3 Sn superconducting wire was established. (author)

Charge-density-wave instabilities expected in monophosphate tungsten bronzes

International Nuclear Information System (INIS)

Canadell, E.; Whangbo, M.

1991-01-01

On the basis of tight-binding band calculations, we examined the electronic structures of the tungsten oxide layers found in the monophosphate tungsten bronze (MPTB) phases. The Fermi surfaces of these MPTB phases consist of five well-nested one- and two-dimensional pieces. We calculated the nesting vectors of these Fermi surfaces and discussed the expected charge-density-wave instabilities

Electrodeposition and corrosion resistance of nanocrystalline white bronze (CuSn) coatings

NARCIS (Netherlands)

Hovestad, A.; Lekka, M.; Willemsen, R.M.R.; Tacken, R.A.; Bonora, P.L.

2008-01-01

For jewellery applications electroplated white bronze (CuSn) was investigated as undercoating for noble metal finishes as alternative to nickel. A strongly acidic plating bath was developed with an organic additive to suppress hydrogen evolution and obtain bright coatings. An electrochemical study

Une fosse du Bronze final IIb dans le Val d’Orléans à Sandillon (Loiret : données archéologiques et contexte environnemental A Late Bronze Age pit IIb in the Val d’Orléans at Sandillon (Loiret: archaeological data and environmental context

Directory of Open Access Journals (Sweden)

Hélène Froquet

2008-06-01

Full Text Available Un diagnostic archéologique réalisé en 2004 à Sandillon (Loiret a permis la découverte d’une occupation du Bronze final IIb dans la plaine alluviale de la Loire. Les structures sont peu nombreuses, mais une fosse se distingue par un ensemble céramique exceptionnel par sa richesse, sa conservation et la présence de formes encore inconnues en région Centre. Ce corpus céramique, corrélé par une datation par radiocarbone, offre désormais un jalon fiable pour la région. Par ailleurs, ces vestiges ont pu être replacés dans leur environnement immédiat grâce à une étude géomorphologique et à l’analyse des restes carpologiques contenus dans la fosse. Ainsi, le croisement des données permet de tenter une approche paléo environnementale sur une occupation en contexte fluviatile et de préciser les relations entre l’homme et son milieu durant cette période chronologique.An archaeological diagnostic carried out in 2004 at Sandillon (Loiret enabled the discovery of a final Bronze Age IIb occupation in the alluvial Loire valley. There are few structures but one pit is noteworthy for a ceramic collection, exceptional in its abundance, its preservation and the presence of previously unknown forms in the Centre region. This ceramic corpus, dated by radiocarbon, henceforth provides a reliable standard for the region. Moreover, these relics could be set in their immediate environment thanks to a geomorphological study and to the analysis of carpological remains contained in the pit. So, the crossing of data allows us to attempt an environmental paleolithic approach to an occupation in a freshwater context and to clarify the relationship between man and his environment in this chronological period.

Synthesis of new perovskite and ''tetragonal bronze'' materials with thorium

Energy Technology Data Exchange (ETDEWEB)

Launay, S; Erb, A; Freundlich, W [Universite Paris-VI (France)

1982-03-22

Disclosure and crystal chemistry study of the solid solutions Th(NbO/sub 3/)/sub 4/, NaNbO/sub 3/ or AgNbO/sub 3/ with perovskite structure and Th(Nb, TaO/sub 3/)/sub 4/, K(Nb,Ta)O/sub 3/ with ''tetragonal tungstene bronze'' structure, ''Banana'' type.

Micromorphological investigation on ring road sediments of the Early Bronze Age site Tell Chuera, Syria

Science.gov (United States)

Fritzsch, Dagmar; Thiemeyer, Heinrich

2010-05-01

Tell Chuera is an Early Bronze Age settlement mount in NE-Syria close to the Turkish border. With a diameter of almost 1 km and a height of 18 m it is one of the biggest tells in the region between the rivers Balikh and Khabur. In 1958 the structures of the city wall was known first by Orthmann (1990). This city wall was built of air-dried mud bricks. The age of the founding of this construction is not yet clear. The earliest pottery from the place is dated around 2500 BC to 2350 BC. Inside the fortification a road was detected, which was first excavated by Novak (1995). We took sediment monoliths in 2004 from a new trench, which shows the same situation of the road. A geomagnetic prospection, that included the whole site, suggests that the road was part of the planned extension of the lower town and serves as a circular road (Meyer, in prep.). The micromorphological investigation focussed on the question, how the road was used. Did animals have had access to the town? The thin sections show different indications of the anthropogenic influence. In all samples pseudomorphs after straw are visible. In many parts ash, charred wood fragments, bone fragments, melted material and fragments of basalt and flint were observable, too. These materials are typical for sediments in streets (cf. Goldberg & Macphail, 2006). In some parts of the thin sections faecal spherulites and dung remains with faecal spherulites give an idea that ruminants used the road as well as men. Trampling structures support this assumption. Moreover, leaching of calcite, its redeposition in mottles, pseudomycels and concretions, hydromorphic stains and the translocation of silt indicate postdepositional pedogenic processes. Literature Goldberg, P., & Macphail, R. I. (2006). Practical and theoretical geoarchaeology: UK Blackwell Publishing. Meyer, J.-W. (in prep.). Überlegungen zur Siedlungsstruktur - eine erste Analyse der Ergebnisse der geomagnetischen Prospektion. In J.-W. Meyer (Ed.), Ausgrabungen

An electron microscopy study of the effect of Ce on plasma sprayed bronze coatings

Science.gov (United States)

Wensheng, Li; Wang, S. C.; Ma, Chao; Zhiping, Wang

2012-07-01

The Cu-Al eutectoid alloy is an excellent material for mould due to its superior low friction. The conventional sand casting technique, however, is not feasible to fabricate high Al bronze because of high hardness and brittleness. Plasma arc spray has been used to produce high Al/Fe bronze coatings for mould. The inherent impurities such as H, O, N, S during the spray, however, may affect the coating's mechanical strength. One approach is to utilise the active rare earth Ce to clean up these impurities. The study is to investigate the effect of Ce on the microstructure, which has few reported in the literature.

Pithouses or ritual dumps? On Late Bronze and Early Iron Age’s material context type in the South of the Iberian Peninsula. The dump of Cortijo Riquelme (Almería

Directory of Open Access Journals (Sweden)

José Luis LÓPEZ CASTRO

2017-12-01

Full Text Available Cortijo Riquelme is a Late Bronze and Early Iron Age’s archaeological dump in the South East of the Iberian Peninsula which belongs to the so called pithouses. This traditional interpretation has been rejected by recent critical studies. Following this positions, the paper analyzes the mentioned dump, which mainly contained Late Bronze and very ancient Phoenician imported pottery, showing the introduction of Phoenician wine and the service for its consumption. A comparison is done with other similar dumps distributed in the South of the Iberian peninsula from Late Bronze Age, though the majority are dated during the early centuries if the 1st millennium bc, coinciding with the Phoenician colonization. Another Mediterranean dumps from Crete, Cyprus, Sicily and North Africa related with feasts help to propose an interpretation for the dump of Cortijo Riquelme and others of the same type, in which the ritual deposit of the containers used in feasts should contribute to the formation of dumps, in a context of increasing competition of local elites in processes of social differentiation.

Reconstructing diet by stable isotope analysis: Two case studies from Bronze Age and Early Medieval Lower Austria

International Nuclear Information System (INIS)

Rumpelmayr, K.

2012-01-01

Carbon and nitrogen stable isotope analysis is nowadays a method frequently applied for the reconstruction of past human diets. The principles of this technique were developed in the late 1970s and 1980s, when it was shown that the isotopic composition of an animal's body reflected that of its diet. Given that the investigated material (often bone collagen) is well enough preserved, several aspects of diet can be investigated by carbon and nitrogen isotopic signatures - expressed as δ13C- und δ15N-values - as e.g. whether nutrition was based on C3 or C4 plants. Furthermore, these signatures can be used for the detection of a marine component in the diet and they contain information about the trophic level of an individual. The goal of the work presented in this talk was to investigate certain aspects of diet using carbon and nitrogen stable isotope analysis of human and animal skeletal remains from Austrian archaeological sites. Two sites (both in Lower Austria) were selected for this study, the Bronze Age Cemetery of Gemeinlebarn and the Early Medieval settlement of Thunau/Gars am Kamp. Previous archaeological and anthropological examinations suggested that both sites were inhabited by socially differentiated populations. Hence, during the stable isotope analysis special attention was paid to the detection of variation in nutritional habits due to sociogenic or gender-related differences. δ13C- und δ15N-values were measured in collagen, extracted from bone samples, by means of elemental analyzer-isotope ratio mass spectrometry (EA-IRMS). The obtained stable isotope data were examined for significant differences between social groups and the sexes using statistical hypothesis testing (MANOVA and ANOVA). (author)

Corrosion characteristics of copper and leaded bronze in palm biodiesel

Energy Technology Data Exchange (ETDEWEB)

Haseeb, A.S.M.A.; Masjuki, H.H.; Ann, L.J.; Fazal, M.A. [Department of Mechanical Engineering, University of Malaya, 50603 Kuala Lumpur (Malaysia)

2010-03-15

Biodiesel has become more attractive as alternative fuel for automobiles because of its environmental benefits and the fact that it is made from renewable sources. However, corrosion of metals in biodiesel is one of the concerns related to biodiesel compatibility issues. This study aims to characterize the corrosion behavior of commercial pure copper and leaded bronze commonly encountered in the automotive fuel system in diesel engine. Static immersion tests in B0, B50 and B100 fuels were carried out at room temperature for 2640 h. Similar immersion tests in B0, B100 and B100 (oxidized) fuels were also conducted at 60 C for 840 h. At the end of the test, corrosion behavior was investigated by weight loss measurements and changes in surface morphology. Fuels were analyzed by using TAN analyzer, FTIR, MOA (multi-element oil analyzer) to investigate acid concentration, oxidation level with water content and corrosive impurities respectively. Results showed that under the experimental conditions, pure copper was more susceptible to corrosion in biodiesel as compared to leaded bronze. (author)

Plastic limit analysis with non linear kinematic strain hardening for metalworking processes applications

International Nuclear Information System (INIS)

Chaaba, Ali; Aboussaleh, Mohamed; Bousshine, Lahbib; Boudaia, El Hassan

2011-01-01

Limit analysis approaches are widely used to deal with metalworking processes analysis; however, they are applied only for perfectly plastic materials and recently for isotropic hardening ones excluding any kind of kinematic hardening. In the present work, using Implicit Standard Materials concept, sequential limit analysis approach and the finite element method, our objective consists in extending the limit analysis application for including linear and non linear kinematic strain hardenings. Because this plastic flow rule is non associative, the Implicit Standard Materials concept is adopted as a framework of non standard plasticity modeling. The sequential limit analysis procedure which considers the plastic behavior with non linear kinematic strain hardening as a succession of perfectly plastic behavior with yielding surfaces updated after each sequence of limit analysis and geometry updating is applied. Standard kinematic finite element method together with a regularization approach is used for performing two large compression cases (cold forging) in plane strain and axisymmetric conditions

Radiocarbon dating of ancient bronze statues: Preliminary results from the Riace statues

International Nuclear Information System (INIS)

Calcagnile, L.; D'Elia, M.; Quarta, G.; Vidale, M.

2010-01-01

The low amount of material needed for the measurements makes AMS radiocarbon a technique suitable for the dating of ancient bronze artefacts through the analysis of the organic residues contained into the casting cores. We present the results of the AMS radiocarbon dating analyses carried out on the organic remains extracted from the casting cores of the Riace bronzes, among the most famous and well preserved sculptures of the Greek-Classical period. Although different dating hypotheses have been suggested on the base of stylistic considerations, no conclusive answers are, so far, available. The sample selection and preparation protocols of the different kind of organic materials (charred wood, vegetal remains and animal hairs) are described as well as the interpretation of the results in the frame of the current dating hypotheses and available analytical information about the casting technology.

The influence of wall thickness on the microstructure of bronze BA1055 with the additions of Si, Cr, Mo and/or W

Directory of Open Access Journals (Sweden)

B.P. Pisarek

2008-12-01

Full Text Available Aluminium bronzes belong to the high-grade constructional materials applied on the put under strongly load pieces of machines, about good sliding, resistant properties on corrosion both in the cast state how and after the thermal processing. It moves to them Cr and Si in the aim of the improvement of their usable proprieties. Additions Mo and/or W were not applied so far in the larger concentration, these elements were introduced to the melts of the copper as the components of modifiers. It was worked out therefore the new kind of bronzes casting including these elements. Make additions to the Cu-Al-Fe-Ni bronze of Si, Cr, Mo and/or W in the rise of these properties makes possible. The investigations of the influence of the wall thickness of the cast on size of crystallites were conducted: the primary phase β and intermetallic phase κ and the width separates of the secondary phase α precipitate at phase boundary. It results from conducted investigations, that in the aluminium bronze BA1055 after simultaneous makes additions Si, Cr, Mo and in the primary phase β it undergoes considerable reducing size. The addition W reduce size of the grain phase β in the thin walls of the cast 3-6 mm, and addition Cr in the range of the thickness of the wall of the cast 3-6 mm it favors to reducing size the phase β, in walls 12-25 mm the growth causes it. The addition Mo does not influence the change of the size of the grain of the β phase significantly. The make addition singly or simultaneously of the Cr, Mo and W to the bronze CuAl10Fe5Ni5Si it influences the decrease of the quantity separates of the phase α on the interface boundary and of width it separates independently from the thickness of the wall of the cast. The simultaneous make addition of the Si, Cr, Mo and W it enlarges the surface of the phase κFe, κMo. The make addition to the bronze CuAl10Fe5Ni5Si of the Cr, Mo or W the quantity of crystallizing hard phase κ enlarges and the

Evaluation of some non-toxic thiadiazole derivatives as bronze corrosion inhibitors in aqueous solution

International Nuclear Information System (INIS)

Varvara, Simona; Muresan, Liana Maria; Rahmouni, Kamal; Takenouti, Hisasi

2008-01-01

The inhibiting effect of four innoxious thiadiazole derivatives (2-mercapto-5-amino-1,3,4-thiadiazole (MAT), 2-mercapto-5-acetylamino-1,3,4-thiadiazole (MAcAT), 2-mercapto-5-methyl-1,3,4-thiadiazole (MMeT) and 2-mercapto-5-phenylamino-1,3,4-thiadiazole (MPhAT)) on bronze corrosion in an aerated solution of 0.2 g L -1 Na 2 SO 4 + 0.2 g L -1 NaHCO 3 at pH 5 was studied by potentiodynamic voltammetry and electrochemical impedance spectroscopy. The corrosion parameters determined from the polarisation curves indicate that the addition of the investigated thiadiazole derivatives decreases both cathodic and anodic current densities, due to an inhibition of the corrosion process, through the adsorption of thiadiazoles on the bronze surface. The inhibiting effect of the investigated organic compounds appears to be more pronounced on the anodic process than on the cathodic one and, except for the case MPhAT, it is enhanced by the increases of the inhibitors' concentration. The adsorption of the thiadiazole derivatives on bronze was confirmed by the presence of the nitrogen atoms in the EDX spectra of the bronze exposed to inhibitor-containing solutions. The magnitude of polarisation resistance values and, consequently, the inhibition efficiencies are influenced by the molecular structure of thiadiazole derivatives. The strongest inhibition was noticed in the presence of compounds with phenyl amino- or amino-functionalities in their molecules. The maximum protection efficiencies were obtained by addition of: 5 mM MAT (95.9%), 1 mM MAcAT (95.7%), 5 mM MMeT (92.6%) and 0.1 mM MPhAT (97%). EIS measurements also revealed that the inhibitor effectiveness of the optimal concentrations of thiadiazole is time-dependent

Evaluation of some non-toxic thiadiazole derivatives as bronze corrosion inhibitors in aqueous solution

Energy Technology Data Exchange (ETDEWEB)

Varvara, Simona [Department of Topography, ' 1 Decembrie 1918' University, 11-13 Nicolae Iorga Street, 510009 Alba Iulia (Romania); Muresan, Liana Maria [Department of Physical Chemistry, ' Babes-Bolyai' University, 11 Arany-Janos Street, 400028 Cluj-Napoca (Romania)], E-mail: limur@chem.ubbcluj.ro; Rahmouni, Kamal; Takenouti, Hisasi [UPMC LISE - UPR 15 of the CNRS, ' Pierre and Marie Curie' University, Paris (France)

2008-09-15

The inhibiting effect of four innoxious thiadiazole derivatives (2-mercapto-5-amino-1,3,4-thiadiazole (MAT), 2-mercapto-5-acetylamino-1,3,4-thiadiazole (MAcAT), 2-mercapto-5-methyl-1,3,4-thiadiazole (MMeT) and 2-mercapto-5-phenylamino-1,3,4-thiadiazole (MPhAT)) on bronze corrosion in an aerated solution of 0.2 g L{sup -1} Na{sub 2}SO{sub 4} + 0.2 g L{sup -1} NaHCO{sub 3} at pH 5 was studied by potentiodynamic voltammetry and electrochemical impedance spectroscopy. The corrosion parameters determined from the polarisation curves indicate that the addition of the investigated thiadiazole derivatives decreases both cathodic and anodic current densities, due to an inhibition of the corrosion process, through the adsorption of thiadiazoles on the bronze surface. The inhibiting effect of the investigated organic compounds appears to be more pronounced on the anodic process than on the cathodic one and, except for the case MPhAT, it is enhanced by the increases of the inhibitors' concentration. The adsorption of the thiadiazole derivatives on bronze was confirmed by the presence of the nitrogen atoms in the EDX spectra of the bronze exposed to inhibitor-containing solutions. The magnitude of polarisation resistance values and, consequently, the inhibition efficiencies are influenced by the molecular structure of thiadiazole derivatives. The strongest inhibition was noticed in the presence of compounds with phenyl amino- or amino-functionalities in their molecules. The maximum protection efficiencies were obtained by addition of: 5 mM MAT (95.9%), 1 mM MAcAT (95.7%), 5 mM MMeT (92.6%) and 0.1 mM MPhAT (97%). EIS measurements also revealed that the inhibitor effectiveness of the optimal concentrations of thiadiazole is time-dependent.

Investigation of vanadium oxide bronzes of phase β by means of annihilation of positrons

International Nuclear Information System (INIS)

Dryzek, E.

1992-01-01

The vanadium bronzes with general composition M x V 2 O 5 (where M means the donor element Li, Na, K, Cu, Na) have been the object of the investigation. The positron annihilation method as well as the broadening of the annihilation line in Doppler spectra have been the basing methods for the study of material structure. The donor lattice vacancies have been investigated as a positron traps being responsible for the shape of annihilation spectra. The model of clustering of donor ions has been constructed. On that base and temperature dependence of the positron annihilation spectra the thermodynamical parameters of donor ion vacancies in vanadium bronzes have been calculated. 112 refs, 33 figs, 11 tabs

Cold spraying of aluminum bronze on profiled submillimeter cermet structures formed by laser cladding

Science.gov (United States)

Ryashin, N. S.; Malikov, A. G.; Shikalov, V. S.; Gulyaev, I. P.; Kuchumov, B. M.; Klinkov, S. V.; Kosarev, V. F.; Orishich, A. M.

2017-10-01

The paper presents results of the cold spraying of aluminum bronze coatings on substrates profiled with WC/Ni tracks obtained by laser cladding. Reinforcing cermet frames shaped as grids with varied mesh sizes were clad on stainless steel substrates using a CO2 laser machine "Siberia" (ITAM SB RAS, Russia). As a result, surfaces/substrates with heterogeneous shape, composition, and mechanical properties were obtained. Aluminum bronze coatings were deposited from 5lF-NS powder (Oerlikon Metco, Switzerland) on those substrates using cold spraying equipment (ITAM SB RAS). Data of profiling, microstructure diagnostics, EDS analysis, and mechanical tests of obtained composites is reported. Surface relief of the sprayed coatings dependence on substrate structure has been demonstrated.

NUMERICAL MODELING OF HARDENING OF UNINTERRUPTEDLY-CASTED BRONZE CASTING

Directory of Open Access Journals (Sweden)

E. I. Marukovich

2009-01-01

Full Text Available The three-dimensional numerical model for calculation of thermal fields during solidification of continuously casted bronze casting is developed. Coefficients of heat transfer on borders of calculation areas on the basis of the solution of inverse heat transfer conduction problem are determined. The analysis of thermal fields, depending on loop variables of drawing and the sizes of not cooled zone of crystallizer is curried out.

Bronze-mean hexagonal quasicrystal

Science.gov (United States)

Dotera, Tomonari; Bekku, Shinichi; Ziherl, Primož

2017-10-01

The most striking feature of conventional quasicrystals is their non-traditional symmetry characterized by icosahedral, dodecagonal, decagonal or octagonal axes. The symmetry and the aperiodicity of these materials stem from an irrational ratio of two or more length scales controlling their structure, the best-known examples being the Penrose and the Ammann-Beenker tiling as two-dimensional models related to the golden and the silver mean, respectively. Surprisingly, no other metallic-mean tilings have been discovered so far. Here we propose a self-similar bronze-mean hexagonal pattern, which may be viewed as a projection of a higher-dimensional periodic lattice with a Koch-like snowflake projection window. We use numerical simulations to demonstrate that a disordered variant of this quasicrystal can be materialized in soft polymeric colloidal particles with a core-shell architecture. Moreover, by varying the geometry of the pattern we generate a continuous sequence of structures, which provide an alternative interpretation of quasicrystalline approximants observed in several metal-silicon alloys.

Influence of heating rates on in situ resistance measurements of a bronze route Nb-Sn-Cu-Ta multifilamentary conductor

International Nuclear Information System (INIS)

Tan, K.S.; Hopkins, S.C.; Glowacki, B.A.

2004-01-01

The superconducting properties of a bronze process multifilamentary conductor are controlled by the structure, dimensions and composition of the intermetallic layers, which are strongly influenced by the details of the heat treatments applied to the conductor. It has previously been reported that the electrical resistivity of a Vacuumschmelze bronze process conductor varies during heat treatment, and that analysis of the conductor as a set of parallel resistors allows the features of the resistivity variation to be assigned to the progress of Nb 3 Sn intermetallic phase formation. The behaviour of NSP2 Nb-Sn-Cu-Ta bronze process multifilamentary conductors (Imperial Metal Industries) is now reported as a function of the heating rate, in preparation for more complex non-isothermal heat treatment procedures. It is shown that the resistance of the wire measured in situ by an alternating current (AC) technique can be used to observe the progress of the formation of Nb 3 Sn, and that the comparison of resistometric measurements at different heating rates can give an indication of other processes (such as recovery and recrystallisation) occurring at lower temperatures during the heating up process prior to isothermal annealing. In addition, this wire containing only about 1% of copper was carefully chosen because of the broken tantalum barriers around individual copper filaments. Therefore, the resistometric measurements were used to attempt to detect the diffusion of tin from the bronze matrix into the copper filaments at lower temperatures without noticeable influence on Nb 3 Sn phase formation. Treating the NSP2 wire as a set of parallel resistors also permits estimates to be made of the intermetallic layer thicknesses from resistometric measurements, and these are shown to be in good agreement with estimates from scanning electron microscopy. The difference in critical temperature, T c , between wires heated at different rates, with the presence of the bronze matrix

Copper and tin isotopic analysis of ancient bronzes for archaeological investigation: development and validation of a suitable analytical methodology.

Science.gov (United States)

Balliana, Eleonora; Aramendía, Maite; Resano, Martin; Barbante, Carlo; Vanhaecke, Frank

2013-03-01

Although in many cases Pb isotopic analysis can be relied on for provenance determination of ancient bronzes, sometimes the use of "non-traditional" isotopic systems, such as those of Cu and Sn, is required. The work reported on in this paper aimed at revising the methodology for Cu and Sn isotope ratio measurements in archaeological bronzes via optimization of the analytical procedures in terms of sample pre-treatment, measurement protocol, precision, and analytical uncertainty. For Cu isotopic analysis, both Zn and Ni were investigated for their merit as internal standard (IS) relied on for mass bias correction. The use of Ni as IS seems to be the most robust approach as Ni is less prone to contamination, has a lower abundance in bronzes and an ionization potential similar to that of Cu, and provides slightly better reproducibility values when applied to NIST SRM 976 Cu isotopic reference material. The possibility of carrying out direct isotopic analysis without prior Cu isolation (with AG-MP-1 anion exchange resin) was investigated by analysis of CRM IARM 91D bronze reference material, synthetic solutions, and archaeological bronzes. Both procedures (Cu isolation/no Cu isolation) provide similar δ (65)Cu results with similar uncertainty budgets in all cases (±0.02-0.04 per mil in delta units, k = 2, n = 4). Direct isotopic analysis of Cu therefore seems feasible, without evidence of spectral interference or matrix-induced effect on the extent of mass bias. For Sn, a separation protocol relying on TRU-Spec anion exchange resin was optimized, providing a recovery close to 100 % without on-column fractionation. Cu was recovered quantitatively together with the bronze matrix with this isolation protocol. Isotopic analysis of this Cu fraction provides δ (65)Cu results similar to those obtained upon isolation using AG-MP-1 resin. This means that Cu and Sn isotopic analysis of bronze alloys can therefore be carried out after a single chromatographic

Dynamic tensile behaviour and deformational mechanism of C5191 phosphor bronze under high strain rates deformation

Energy Technology Data Exchange (ETDEWEB)

Hu, Dao-chun [College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016 (China); College of Mechanical and Electrical Engineering, Taizhou Vocational & Technical College, Taizhou 318000 (China); Chen, Ming-he, E-mail: meemhchen@nuaa.edu.cn [College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016 (China); Wang, Lei; Cheng, Hu [College of Mechanical Engineering, Taizhou University, Taizhou 318000 (China)

2016-01-01

High speed stamping process is used to high strength and high electrical conductivity phosphor bronze with extremely high strain rates more than 10{sup 3} s{sup −1}. This study on the dynamic tensile behaviour and deformational mechanism is to optimise the high speed stamping processes and improve geometrical precision in finished products. Thus, the tensile properties and deformation behaviour of C5191 phosphor bronze under quasi-static tensile condition at a strain rate of 0.001 s{sup −1} by electronic universal testing machine, and dynamic tensile condition at strain rate of 500, 1000 and 1500 s{sup −1} by split Hopkinson tensile bar (SHTB) apparatus were studied. The effects of strain rate and the deformation mechanism were investigated by means of SEM and TEM. The results showed that the yield strength and tensile strength of C5191 phosphor bronze under high strain rates deformation increased by 32.77% and 11.07% respectively compared with quasi-static condition, the strain hardening index increases from 0.075 to 0.251, and the strength of the material strain rates sensitivity index change from 0.005 to 0.022, which presented a clear sensitive to strain rates. Therefore, it is claimed that the dominant deformation mechanism was changed by the dislocation motion under different strain rates, and the ability of plastic deformation of C5191 phosphor bronze increased due to the number of movable dislocations increased significantly, started multi-line slip, and the soft effect of adiabatic temperature rise at the strain rate ranging from 500 to 1500 s{sup −1}.

Dynamic secondary ion mass spectrometry and X-ray photoelectron spectroscopy on artistic bronze and copper artificial patinas

International Nuclear Information System (INIS)

Balta, I.Z.; Pederzoli, S.; Iacob, E.; Bersani, M.

2009-01-01

To prevent the natural processes of decay and to develop and improve the treatments of conservation and restoration of artistic bronzes meaning statues and sculptures, it is important understanding the patination processes and the knowledge of artificially corroded surfaces. Chemical and physical characterization of artificial patinas obtained on artistic bronzes and coppers by using the 19th century Western traditional patination techniques and recipes by means of SEM-EDS, light microscopy and ATR/FT-IR has been done in previous studies [I.Z. Balta, L. Robbiola, Characterization of artificial black patinas on artistic cast bronze and pure copper by using SEM-EDS and light microscopy, in: Proceedings of the 13th European Microscopy Congress, 22-27 August 2004, Antwerp, Belgium, EMC 2004 CD-Rom Conference Preprints; I.Z. Balta, L. Robbiola, Traditional artificial artistic bronze and copper patinas-an investigation by SEM-EDS and ATR/FT-IR, in: Proceedings of the 8th International Conference on Non Destructive Investigations and Microanalysis for the Diagnostics and Conservation of the Cultural and Environmental Heritage, 15-19 May 2005, Lecce, Italy, ART'05 CD-Rom Conference Preprints]. Differences in morphology (structure, thickness, porosity, adherence, compactity, uniformity, homogeneity) and also in composition, on both artistic cast bronze and pure copper patinas, were clearly evidenced. Further in-depth investigation is required to be carried out in order to better understand the patinas mechanisms of formation and the layers kinetics of growth. The elemental and chemical analysis, either on a surface monolayer or in a depth profile, by using the Secondary Ion Mass Spectrometry (SIMS) and X-ray Photoelectron Spectroscopy (XPS) techniques, can provide this kind of information, unique at trace-level sensitivity. SIMS has proved to be a suitable analytical technique for analyzing small amounts of material with high atomic sensitivity (ppm or even ppb) and high

Dynamic secondary ion mass spectrometry and X-ray photoelectron spectroscopy on artistic bronze and copper artificial patinas

Energy Technology Data Exchange (ETDEWEB)

Balta, I.Z., E-mail: balta_z_i@yahoo.com [National Research Institute for Conservation and Restoration, Calea Victoriei 12, Sector 3, 030026 Bucharest (Romania); Pederzoli, S.; Iacob, E.; Bersani, M. [Fondazione Bruno Kessler - IRST, Centro per la Ricerca Scientifica e Tecnologica, Trento (Italy)

2009-04-01

To prevent the natural processes of decay and to develop and improve the treatments of conservation and restoration of artistic bronzes meaning statues and sculptures, it is important understanding the patination processes and the knowledge of artificially corroded surfaces. Chemical and physical characterization of artificial patinas obtained on artistic bronzes and coppers by using the 19th century Western traditional patination techniques and recipes by means of SEM-EDS, light microscopy and ATR/FT-IR has been done in previous studies [I.Z. Balta, L. Robbiola, Characterization of artificial black patinas on artistic cast bronze and pure copper by using SEM-EDS and light microscopy, in: Proceedings of the 13th European Microscopy Congress, 22-27 August 2004, Antwerp, Belgium, EMC 2004 CD-Rom Conference Preprints; I.Z. Balta, L. Robbiola, Traditional artificial artistic bronze and copper patinas-an investigation by SEM-EDS and ATR/FT-IR, in: Proceedings of the 8th International Conference on Non Destructive Investigations and Microanalysis for the Diagnostics and Conservation of the Cultural and Environmental Heritage, 15-19 May 2005, Lecce, Italy, ART'05 CD-Rom Conference Preprints]. Differences in morphology (structure, thickness, porosity, adherence, compactity, uniformity, homogeneity) and also in composition, on both artistic cast bronze and pure copper patinas, were clearly evidenced. Further in-depth investigation is required to be carried out in order to better understand the patinas mechanisms of formation and the layers kinetics of growth. The elemental and chemical analysis, either on a surface monolayer or in a depth profile, by using the Secondary Ion Mass Spectrometry (SIMS) and X-ray Photoelectron Spectroscopy (XPS) techniques, can provide this kind of information, unique at trace-level sensitivity. SIMS has proved to be a suitable analytical technique for analyzing small amounts of material with high atomic sensitivity (ppm or even ppb) and

Hydrothermal preparation of blue molybdenum bronze nanoribbons: structural changes in mother crystals, related to solid-state conversion and crystallite splitting to nanomorphology

Science.gov (United States)

Nishida, Takamasa; Eda, Kazuo

2018-02-01

Hydrothermal syntheses of alkali-metal blue molybdenum bronze nanoribbons, which are expected to exhibit unique properties induced by a combined effect of extrinsic and intrinsic low-dimensionalities, from hydrated-alkali-metal molybdenum bronzes were investigated. Nanoribbons grown along the quasi-one-dimensional (1D) conductive direction of Cs0.3MoO3, which is difficult to prepare by the conventional methods, were first synthesized. The nanomorphology formation is achieved by a solid-state conversion (or crystallite splitting) and subsequent crystallite growth, and the structural changes of the starting material related to the conversion were first observed by powder X-ray diffraction and scanning transmission electron microscopy as a result of finely tuned reaction system and preparation conditions. The structural changes were analyzed by model simulations and were attributed to the structural modulations that were concerned with the intralayer packing disorder and with two-dimensional long-range ordered structure, formed in MoO3 sheets of the hydrated molybdenum bronze. Moreover, the modulations were related to displacement defects of the Mo-O framework units generated along the [100] direction in the hydrated molybdenum bronze. Then, it was suggested that the solid-state conversion into blue molybdenum bronze and the crystallite splitting to nanomorphology were initiated by the breaking of the Mo-O-Mo bonds at the defects. [Figure not available: see fulltext.

Ra and the average effective strain of surface asperities deformed in metal-working processes

DEFF Research Database (Denmark)

Bay, Niels; Wanheim, Tarras; Petersen, A. S

1975-01-01

Based upon a slip-line analysis of the plastic deformation of surface asperities, a theory is developed determining the Ra-value (c.l.a.) and the average effective strain in the surface layer when deforming asperities in metal-working processes. The ratio between Ra and Ra0, the Ra-value after...... and before deformation, is a function of the nominal normal pressure and the initial slope γ0 of the surface asperities. The last parameter does not influence Ra significantly. The average effective strain View the MathML sourcege in the deformed surface layer is a function of the nominal normal pressure...... and γ0. View the MathML sourcege is highly dependent on γ0, View the MathML sourcege increasing with increasing γ0. It is shown that the Ra-value and the strain are hardly affected by the normal pressure until interacting deformation of the asperities begins, that is until the limit of Amonton's law...

Iron and silicon effect on the phase composition of nickel-beryllium bronzes

International Nuclear Information System (INIS)

Zakharov, A.M.; Zakharov, M.V.; Ajvaz'yan, N.G.

1977-01-01

In order to specify phase composition and strengthening heat treatment conditions for nickel beryllium bronzes that are promising electrode materials for welding of high strength steels and nickel-base superalloys, the primary section of the quinternary Cu-Ni-Be-Fe-S system was studied at constant nickel and beryllium concentration and varying silicon and iron concentration (max. 4% of every element). The study was made using the metallographic and x-ray phase techniques, determination of alloy solidus temperature, and exessphase microhardness testing. Silicon additions are shown to decrease abruptly and those of iron, in contrast, somewhat to raise the solidus temperature of ternary Cu + 2% Ni + 0.3% Be alloy. When added concurrently, iron compensates for the damaging silicon effect on the solidus temperature of Cu-Ni-Be alloys. The excess phases formed can be used as strengthening agents of Cu-Ni-Be-Si-Fe alloys during quenching and subsequent aging

Paleopathological description and diagnosis of metastatic carcinoma in an Early Bronze Age (4588+34 Cal. BP forager from the Cis-Baikal region of Eastern Siberia.

Directory of Open Access Journals (Sweden)

Angela R Lieverse

Full Text Available Extensive osteolytic and osteoblastic lesions were observed on the skeletal remains of an adult male excavated from an Early Bronze Age cemetery dated to 4556+32 years BP, located in the Cis-Baikal region of Siberia (Russian Federation. Lytic lesions ranged in size from several mm to over 60 mm in diameter and had irregular, moth-eaten borders. Many of these lesions destroyed trabecular bone, though a hollowed shell of cortical bone often remained observable. Radiographic analysis revealed numerous lytic lesions within trabecular bone that had not yet affected the cortex. Blastic lesions were identified as spiculated lines, bands, or nodules of mostly immature (woven bone formed at irregular intervals. Anatomical elements with the greatest involvement included those of the axial skeleton (skull, vertebrae, sacrum, ribs, and sternum as well as proximal appendicular elements (ossa coxae, proximal femora, clavicles, scapulae, and proximal humeri. Osteocoalescence of destructive foci was observed on the ilium and frontal bone, with the largest lesion found on the right ilium. Differential diagnoses include metastatic carcinoma, mycotic infections, tuberculosis, Langerhan's cell histiocytosis, and multiple myeloma. Based on lesion appearance and distribution, age and sex of the individual, as well as pathogen endemism, the most likely diagnostic option for this set of lesions is metastatic carcinoma. The age and sex of this individual and appearance of the lesions may reflect carcinoma of the lung or, possibly, prostate. This represents one of the earliest cases of metastatic carcinoma worldwide and the oldest case documented thus far from Northeast Asia.

Joining of rubber substrate with bronze surface by the method of molecular adhesion

International Nuclear Information System (INIS)

Oravec, J.; Preto, J.; Hronkovic, J.; Melus, P.; Hirahara, H.; Sang, J.

2017-01-01

During the adhesion process using the adhesives there are many risks of defects caused by boundary stress, strength and to resolve these traditional adhesive problems a method called molecule adhesion technology, was used. This method can successfully adhere different materials and has the advantages such as material independence and strong adhesion strength without any adhesive agent. The impact of selected coupling agents on the green and final adhesion on the boundary bronze surface - natural rubber based coating blend was studied in the presented work. Wires of bronze (Cu/Sn 96:4) coated steel bead wire were submerged in solutions of coupling agents in ethanol for 30 s at various temperature and dried. The effect of the surface modification was evaluated by measuring of XPS, FT-IR, the morphology of the brass plate surfaces after the treatment was studied by the atomic force microscopy (AFM). (authors)

Neutron and X-ray characterisation of the metallurgical properties of a 7th century BC Corinthian-type bronze helmet

Science.gov (United States)

Pantos, E.; Kockelmann, W.; Chapon, L. C.; Lutterotti, L.; Bennet, S. L.; Tobin, M. J.; Mosselmans, J. F. W.; Pradell, T.; Salvado, N.; Butí, S.; Garner, R.; Prag, A. J. N. W.

2005-09-01

Neutron and synchrotron X-ray diffraction, X-ray fluorescence and FTIR were used to examine a Corinthian-type bronze helmet which is now on display at The Manchester Museum, UK. This type of helmet was manufactured out of a single piece of bronze, probably on a rod-anvil, and like all body-armour it was made to measure. Neutron diffraction sampling of the bronze volume in different areas was used to study the composition, microstructure and crystallographic texture of the alloy in order to draw conclusions about the manufacturing processes. The neutron data revealed the presence of microstrains and non-random distributions of bronze grains hinting at annealing-hammering working cycles in order to harden and shape the alloy. X-ray fluorescence showed that the main body of the helmet is a copper-tin alloy, while the noseguard contains zinc in high abundance. This key compositional difference confirms that the noseguard is not the original but is a modern substitute fabricated for restoration purposes. SR XRD and FTIR from several spots on the head and noseguard identified several surface corrosion products and showed a variation of the Cu-Sn or Cu-Zn percentage compositions, and of the mineral phases. Small samples of corrosion flakes extracted from the outside and inside of the helmet were used to obtain powder XRD patterns.

Specific corrosion product on interior surface of a bronze wine vessel with loop-handle and its growth mechanism, Shang Dynasty, China

International Nuclear Information System (INIS)

Li Yang; Bao Zhirong; Wu Taotao; Jiang, Junchun; Chen Guantao; Pan Chunxu

2012-01-01

In this paper, a kind of specific stalactitic product was found on the interior surface of a covered bronze wine vessel with loop-handle (Chinese name is you), which was fabricated in Shang Dynasty (1700 B.C.–1100 B.C.) and now is collected in Xiaogan Museum, Hubei province of China. The microstructures of the product were characterized systematically by using optical microscopy, scanning electron microscope, transmission electron microscope, X-ray diffraction, and Raman microscopy. The experimental results revealed that the product belonged to a kind of malachite with high purity and high crystallinity. The growth of the product was considered to be a possible reason that the vessel was overly airtight within a museum display cabinet besides a lid of the vessel, which made the excess of H 2 O and CO 2 gas concentrations inside the vessel during long-term storage. This corrosion product is very harmful to bronze cultural relics, because of a large amount of copper consumption from the matrix which will reduce its life. The growth mechanism of the specific stalactitic product and the suggestions for preservation of the similar bronze relics in museum were proposed. - Highlights: ► The stalactitic product was the high purity and good crystallinity malachite. ► Its growth was related to the excess of H 2 O and CO 2 gas concentrations in museum. ► It is harmful to the bronzes, because copper will be consumed from the matrix. ► The suggestions for preservation of the similar bronzes in museum were proposed.

Ancient bronze coins from Mediterranean basin: LAMQS potentiality for lead isotopes comparative analysis with former mineral

Energy Technology Data Exchange (ETDEWEB)

Torrisi, L., E-mail: Lorenzo.Torrisi@unime.it [Department of Physics Science - MIFT, Messina University, V.le F.S. d’Alcontres 31, 98166 S. Agata, Messina (Italy); Italiano, A. [INFN, Sezione di Catania, Gruppo collegato di Messina (Italy); Torrisi, A. [Institute of Optoelectronics, Military University of Technology, 2 Kaliskiego Str., 00-908 Warsaw (Poland)

2016-11-30

Highlights: • Surface and bulk compositional elements in ancient bronze coins were investigated using XRF analysis. • Lead stable isotope {sup 204}Pb, {sup 206}Pb, {sup 207}Pb and {sup 208}Pb were measured in ancient coins with LAMQS analysis. • Lead ratios {sup 208}Pb/{sup 206}Pb and {sup 207}Pb/{sup 206}Pb, measured by LAMQS, were compared with Brettscaife.net geological database relative to the minerals in different mines of Mediterranean basin. • Bronze coins were correlated to possible ancient mining sites of minerals from which lead was extracted. - Abstract: Bronze coins coming from the area of the Mediterranean basin, dated back the II–X Cent. A.D., were analyzed using different physical analytical techniques. Characteristic X-ray fluorescence was used with electrons and photons, in order to investigate the elemental composition of both the surface layers and bulk. Moreover, the quadrupole mass spectrometry coupled to laser ablation (LAMQS technique) in high vacuum was used to analyse typical material compounds from surface contamination. Mass spectrometry, at high resolution and sensitivity, extended up to 300 amu, allowed measuring the {sup 208}Pb/{sup 206}Pb and {sup 207}Pb/{sup 206}Pb isotopic ratios into the coins. Quantitative relative analyses of these isotopic ratios identify the coin composition such as a “fingerprint” depending on the mineral used to extract the lead. Isotopic ratios in coins can be compared to those of the possible minerals used to produce the bronze alloy. A comparison between the measured isotope ratios in the analyzed coins and the literature database, related to the mineral containing Pb as a function of its geological and geophysical extraction mine, is presented. The analysis, restricted to old coins and the mines of the Mediterranean basin, indicates a possible correlation between the coin compositions and the possible geological sites of the extracted mineral.

Investigation of laser cleaning on bronze cultural relics

International Nuclear Information System (INIS)

Ling, Xiulan; Wang, Gao; Zhang, Chen

2016-01-01

The effects of laser cleaning on the corrosion layers of bronze cultural relics were studied using a pulsed fiber laser. The laser cleaning threshold value of the corrosion layers was obtained. It was found that the corrosion layer was removed successfully by employing a laser fluence value of 0.32 J cm −2 and scanning for three times. To obtain experimental evidence, laser con-focal scanning microscopy, scanning electron microscopy (SEM), energy dispersive x-ray spectroscopy (EDS), laser induced breakdown spectroscopy (LIBS) and laser Raman spectroscopy were employed to investigate the cleaning efficiency of corrosion layers on specimens. (paper)

Клад эпохи поздней бронзы с клепаным сосудом из Восточного Казахстана / A Late Bronze Age hoard with a riveted vessel from East Kazakhstan

Directory of Open Access Journals (Sweden)

Galina Kushch

2016-10-01

Full Text Available This article presents a hoard of the Bronze Age metal objects found in the East Kazakhstan region. Parallels to the items from the hoard are found among antiquities of the Andronovo culture of the Altai, the Tien Shan area, Jetysu, Xinjiang. The assemblage from Zaisan published here enlarged the group of hoards typical for the Late Bronze Age. The most interesting objects among the ones included in the hoard are the riveted cauldron and the axe with curved butt and grid decoration. Archaeological studies revealed the wide distribution of axes with curved butts that allow us to consider them as characteristic instruments of the Late Bronze Age period in the areas of East Kazakhstan, the Altai, Jetysu, Central Asia, and the northern part of Central Asia. Researchers came to the conclusion that this type of axes can be dated to the 12th - 9th (poss. 8th centuries BC. Metal vessels of the Late Bronze Age (especially, the copper ones are rarely found in the eastern part of the Eurasian steppes. Besides the cauldron described in the article, some metal vessels were discovered in Central Kazakhstan at the cemeteries of Ashchisu and Nurataldy-1 (20th - 19th centuries BC. Also, similar objects are known among the materials of the Izmailov cemetery in East Kazakhstan, and metal items of the Andreevka hoard from south-eastern Kazakhstan dated to the 12th - 9th (poss. 8th centuries BC. Meanwhile, the closest parallels to the cauldron from the Zaisan hoard can be seen in the western part of Eurasia. Taking into account V.S. Bochkarev’s classifi cation that consists of three main groups of metal cauldrons, the vessel from East Kazakhstan may occupy an intermediate position between the groups IIB and IIIB. This allows us to date the cauldron to the end of the 13th - 12th centuries BC, while the more probable date for the Zaisan hoard as a whole lays within the range of the 12th - 9th centuries BC.

Specific corrosion product on interior surface of a bronze wine vessel with loop-handle and its growth mechanism, Shang Dynasty, China

Energy Technology Data Exchange (ETDEWEB)

Li Yang; Bao Zhirong; Wu Taotao [School of Physics and Technology, Center for Electron Microscopy and MOE Key Laboratory of Artificial Micro- and Nano-structures, Wuhan University, Wuhan 430072 (China); Jiang, Junchun [Xiaogan Museum, Xiaogan 432000 (China); Chen Guantao [Center for Archaeometry, Wuhan University, Wuhan 430072 (China); Pan Chunxu, E-mail: cxpan@whu.edu.cn [School of Physics and Technology, Center for Electron Microscopy and MOE Key Laboratory of Artificial Micro- and Nano-structures, Wuhan University, Wuhan 430072 (China); Center for Archaeometry, Wuhan University, Wuhan 430072 (China)

2012-06-15

In this paper, a kind of specific stalactitic product was found on the interior surface of a covered bronze wine vessel with loop-handle (Chinese name is you), which was fabricated in Shang Dynasty (1700 B.C.-1100 B.C.) and now is collected in Xiaogan Museum, Hubei province of China. The microstructures of the product were characterized systematically by using optical microscopy, scanning electron microscope, transmission electron microscope, X-ray diffraction, and Raman microscopy. The experimental results revealed that the product belonged to a kind of malachite with high purity and high crystallinity. The growth of the product was considered to be a possible reason that the vessel was overly airtight within a museum display cabinet besides a lid of the vessel, which made the excess of H{sub 2}O and CO{sub 2} gas concentrations inside the vessel during long-term storage. This corrosion product is very harmful to bronze cultural relics, because of a large amount of copper consumption from the matrix which will reduce its life. The growth mechanism of the specific stalactitic product and the suggestions for preservation of the similar bronze relics in museum were proposed. - Highlights: Black-Right-Pointing-Pointer The stalactitic product was the high purity and good crystallinity malachite. Black-Right-Pointing-Pointer Its growth was related to the excess of H{sub 2}O and CO{sub 2} gas concentrations in museum. Black-Right-Pointing-Pointer It is harmful to the bronzes, because copper will be consumed from the matrix. Black-Right-Pointing-Pointer The suggestions for preservation of the similar bronzes in museum were proposed.

Influence of the technology of melting and inoculation preliminary alloy AlBe5 on change of concentration of Al and micro-structure of the bronze CuAl10Ni5Fe4

Directory of Open Access Journals (Sweden)

B. Pisarek

2010-04-01

Full Text Available Examining was the aim of the work: influence of the permanent temperature 1300°C ± 15°C and changing time of isothermal holding in the range 0÷50 minutes on the melting loss of aluminum in the bronze CuAl10Ni5Fe4; the quantity the slag rafining - covering Unitop BA-1 (0÷1,5% on the effectiveness of the protection of liquid bronze before the oxygenation, the quantity of the preliminary alloy - in-oculant AlBe5 (0÷1,0% on the effective compensation melting loss of aluminum and time of isothermal holding on the effect of the in-oculation of the bronze and the comparison of the effectiveness of the inoculation of the bronze in furnace and in the form. Introduced investigations resulted from the study of the new grades of the Cu-Al-Fe-Ni bronze with additions singly or simultaneously Si, Cr, Mo and/or W, to melting which necessary it is for high temperature and comparatively long time isothermal holding indispensable to the occur of the process of diffusive dissolving the high-melting of the bronze components. High temperature and lengthening the time of isothermal holding the liquid bronze in casting furnace the melting loss of Al influences the growth. Addition the slag of covering-refining Unitop BA-1 in the quantity 1,5% the bronze protects before the melting loss of aluminum by the time of isothermal holding in the temperature 1300°C about 15 minutes. Addition of the preliminary alloy AlBe5 in the quantity 0,6% it assures the effective compensation of the aluminum which melting loss undergoes for the studied parameters of the melting. The effect of the inoculation of the bronze together with diminishes the preliminary alloy AlBe5 with lengthening the time of isothermal hold-ing. Because of this, use of the method of introducing the preliminary alloy it is seems good solution on the inoculation of aluminum bronzes directly to form, unsensitive on the time of isothermal holding the bronze.

Combining X-ray based methods to study the protohistoric bronze technology in Western Iberia

International Nuclear Information System (INIS)

Valério, P.; Silva, R.J.C.; Soares, A.M.M.; Araújo, M.F.; Gonçalves, A.P.; Soares, R.M.

2015-01-01

The Phoenician arrival at Iberian coastal regions had an actual influence on indigenous technology. A collection of coeval metallurgical remains and artefacts was studied by EDXRF, micro-EDXRF, SEM–EDS and XRD, to identify certain features of the production and utilisation of metal in protohistoric Western Iberia. The composition of artefacts indicates a prevalence of Cu–Sn alloys with low content of impurities (Pb, As, Sb and Fe) during Late Bronze and Early Iron Ages, while the composition of slags points to a smaller loss of copper in Phoenician smelting operations. Moreover, the amount of iron impurities in metal proved to be a helpful discriminator between indigenous and Phoenician-based metallurgies, showing that later alloys have higher amounts of iron. Besides, the indigenous alloys have higher tin contents that can probably be explained by the easier access to metal sources of local communities

Combining X-ray based methods to study the protohistoric bronze technology in Western Iberia

Energy Technology Data Exchange (ETDEWEB)

Valério, P., E-mail: pvalerio@ctn.ist.utl.pt [Centro de Ciências e Tecnologias Nucleares (C2TN), Instituto Superior Técnico, Universidade de Lisboa, Campus Tecnológico e Nuclear, Estrada Nacional 10 (km 139,7), 2695-066 Bobadela LRS (Portugal); Silva, R.J.C., E-mail: rjcs@fct.unl.pt [CENIMAT/I3N, Departamento de Ciência dos Materiais, Faculdade de Ciências e Tecnologia, FCT, Universidade Nova de Lisboa, 2829-516 Monte de Caparica (Portugal); Soares, A.M.M., E-mail: amsoares@ctn.ist.utl.pt [Centro de Ciências e Tecnologias Nucleares (C2TN), Instituto Superior Técnico, Universidade de Lisboa, Campus Tecnológico e Nuclear, Estrada Nacional 10 (km 139,7), 2695-066 Bobadela LRS (Portugal); Araújo, M.F., E-mail: faraujo@ctn.ist.utl.pt [Centro de Ciências e Tecnologias Nucleares (C2TN), Instituto Superior Técnico, Universidade de Lisboa, Campus Tecnológico e Nuclear, Estrada Nacional 10 (km 139,7), 2695-066 Bobadela LRS (Portugal); Gonçalves, A.P., E-mail: apg@ctn.ist.utl.pt [Centro de Ciências e Tecnologias Nucleares (C2TN), Instituto Superior Técnico, Universidade de Lisboa, Campus Tecnológico e Nuclear, Estrada Nacional 10 (km 139,7), 2695-066 Bobadela LRS (Portugal); Soares, R.M., E-mail: ruigusmao@hotmail.com [UNIARQ, Centro de Arqueologia da Universidade de Lisboa, Faculdade de Letras, Alameda da Universidade, 1600-214 Lisboa (Portugal)

2015-09-01

The Phoenician arrival at Iberian coastal regions had an actual influence on indigenous technology. A collection of coeval metallurgical remains and artefacts was studied by EDXRF, micro-EDXRF, SEM–EDS and XRD, to identify certain features of the production and utilisation of metal in protohistoric Western Iberia. The composition of artefacts indicates a prevalence of Cu–Sn alloys with low content of impurities (Pb, As, Sb and Fe) during Late Bronze and Early Iron Ages, while the composition of slags points to a smaller loss of copper in Phoenician smelting operations. Moreover, the amount of iron impurities in metal proved to be a helpful discriminator between indigenous and Phoenician-based metallurgies, showing that later alloys have higher amounts of iron. Besides, the indigenous alloys have higher tin contents that can probably be explained by the easier access to metal sources of local communities.

Alloy characterization of a 7th Century BC archeological bronze vase — Overcoming patina constraints using Monte Carlo simulations

Energy Technology Data Exchange (ETDEWEB)

Manso, M. [Laboratório de Instrumentação, Engenharia Biomédica e Fisica da Radiação (LIBPhys-UNL), Departamento de Fisica, Faculdade de Ciências e Tecnologias, Universidade Nova de Lisboa, 2829-516 Monte da Caparica (Portugal); Faculdade de Belas-Artes da Universidade de Lisboa, Largo da Academia Nacional de Belas-Artes, 1249-058 Lisboa (Portugal); Schiavon, N. [Hercules Laboratory, University of Évora, Palácio do Vimioso,Largo Marquês de Marialva 8, 7000-809 Évora Portugal (Portugal); Queralt, I. [Laboratory of X-ray Analytical Applications, Institute of Earth Sciences Jaume Almera, CSIC, Solé Sabaris s/n, 08028 Barcelona (Spain); Arruda, A.M. [Centro de Arqueologia da Universidade de Lisboa (UNIARQ), Alameda da Universidade, 1600-214 Lisboa (Portugal); Sampaio, J.M. [BioISI — Biosystems & Integrative Sciences Institute, Faculdade de Ciências da Universidade de Lisboa (Portugal); Brunetti, A., E-mail: brunetti@uniss.it [Department of Political Science and Communication, University of Sassari, Via Piandanna 2, 07100 Sassari (Italy)

2015-05-01

In this work we evaluate the composition of a bronze alloy using X-ray fluorescence spectrometry (XRF) and Monte Carlo (MC) simulations. For this purpose, a 7th Century BC archeological vase from the SW Iberian Peninsula, displaying a well formed corrosion patina was analyzed by means of a portable X-ray fluorescence spectrometer. Realistic MC simulations of the experimental setup were performed with the XRMC code package which is based on an intensive use of variance-reduction techniques and uses XRAYLIB a constantly updated X-ray library of atomic data. A single layer model was applied for simulating XRF of polished/pristine bronze whereas a two-or-three-layer model was developed for bronze covered respectively by a corrosion patina alone or coupled with a superficial soil derived crust. These simulations took into account corrosion (cerussite (PbCO{sub 3}), cuprite (Cu{sub 2}O), malachite (Cu{sub 2}CO{sub 3}(OH){sub 2}), litharge (PbO)) and soil derived products (goethite (FeO(OH)) and quartz (SiO{sub 2})) identified by means of X-ray diffraction and Raman micro analytical techniques. Results confirm previous research indicating that the XRF/Monte Carlo protocol is well suited when a two-layered model is considered, whereas in areas where the patina + soil derived products' crust is too thick, X-rays from the alloy substrate are not able to exit the sample. Quantitative results based on MC simulations indicate that the vase is made of a lead–bronze alloy: Mn (0.2%), Fe (1.0%), Cu (81.8%), As (0.5%), Ag (0.6%), Sn (8.0%) and Pb (8.0%). - Highlights: • We study an archeological bronze vase with patina corrosion using XRF spectrometry. • The experimental setup is modeled using Monte Carlo (MC) simulations. • Combining MC simulations with XRF it is possible to derive concentrations. • We demonstrated that this is possible without removing the patina.

Description of lithic production processes during the Bronze Age in the Eastern area of the Iberian Peninsula | Caracterización de los procesos de producción lítica durante la Edad del Bronce en el Levante de la Península Ibérica

Directory of Open Access Journals (Sweden)

Francisco Javier Jover Maestre

2008-12-01

Full Text Available This paper presents some general considerations about lithic production processes during the Bronze Age in the Eastern area of the Iberian Peninsula. Lithic evidencies in Bronce Age sites are studied and compared with lithic productions of previous archaeological periods. | Se presentan algunas consideraciones generales sobre los procesos de producción lítica durante la Edad del Bronce en el Levante de la península Ibérica, a partir del estudio de las evidencias líticas documentadas en un amplio número de asentamientos y de su comparación cualitativa con las producciones de las fases arqueológicas previas.

Evaluating the use of zinc oxide and titanium dioxide nanoparticles in a metalworking fluid from a toxicological perspective

Energy Technology Data Exchange (ETDEWEB)

Seyedmahmoudi, S. H. [Oregon State University, Industrial Sustainability Laboratory, School of Mechanical, Industrial, and Manufacturing Engineering (United States); Harper, Stacey L. [Oregon State University, Department of Environmental and Molecular Toxicology & School of Chemical, Biological and Environmental Engineering (United States); Weismiller, Michael C. [Master Chemical Corporation (United States); Haapala, Karl R., E-mail: karl.haapala@oregonstate.edu [Oregon State University, Industrial Sustainability Laboratory, School of Mechanical, Industrial, and Manufacturing Engineering (United States)

2015-02-15

Adding nanoparticles (NPs) to metalworking fluids (MWFs) has been shown to improve performance in metal cutting. Zinc oxide nanoparticles (ZnO NPs) and titanium dioxide nanoparticles (TiO{sub 2} NPs), for example, have exhibited the ability to improve lubricant performance, decrease the heat created by machining operations, reduce friction and wear, and enhance thermal conductivity. ZnO and TiO{sub 2} NPs are also relatively inexpensive compared to many other NPs. Precautionary concerns of human health risks and environmental impacts, however, are especially important when adding NPs to MWFs. The goal of this research is to investigate the potential environmental and human health effects of these nanoenabled products during early design and development. This research builds on a prior investigation of the stability and toxicity characteristics of NPs used in metalworking nanofluids (MWnF™). The previous study only investigated one type of NP at one level of concentration. This research expands on the previous investigations through the valuation of three different types of NPs that vary in morphology (size and shape) and was conducted over a wide range of concentrations in the base fluid. In the presented work, mixtures of a microemulsion (TRIM{sup ®} MicroSol{sup ®} 585XT), two different types of TiO{sub 2} NPs (referred to as TiO{sub 2}A and TiO{sub 2}B) and one type of ZnO NP were used to evaluate MWnF™ stability and toxicity. Dynamic light scattering was used to assess stability over time and an embryonic zebrafish assay was used to assess toxicological impacts. The results reveal that, in general, the addition of these NPs increased toxicity relative to the NP-free formulation. The lowest rate of zebrafish malformations occurred at 5 g/L TiO{sub 2}A NP, which was even lower than for the base fluid. This result is particularly promising for future MWnF™ development, given that the mortality rate for 5 g/L TiO{sub 2}A was not significantly different

Analysis of the Causes of Cracks in a Thick-Walled Bush Made of Die-Cast Aluminum Bronze

Directory of Open Access Journals (Sweden)

Pisarek B.P.

2016-12-01

Full Text Available For the die casting conditions of aluminium bronzes assumed based on the literature data, a thick-walled bush was cast, made of complex aluminium bronze (Cu-Al-Fe-Ni-Cr. After the cast was removed from the mould, cracks were observed inside it. In order to identify the stage in the technological production process at which, potentially, the formation of stresses damaging the continuity of the microstructure created in the cast was possible (hot cracking and/or cold cracking, a computer simulation was performed. The article presents the results of the computer simulation of the process of casting the material into the gravity die as well as solidifying and cooling of the cast in the shape of a thick-walled bush. The simulation was performed with the use of the MAGMA5 program and by application of the CuAl10Ni5,5Fe4,5 alloy from the MAGMA5 program database. The results were compared with the location of the defects identified in the actual cast. As a result of the simulation of the die-casting process of this bush, potential regions were identified where significant principal stresses accumulate, which can cause local hot and cold cracking. Until now, no research has been made of die-cast aluminium bronzes with a Cr addition. Correlating the results of the computer simulation validated by the analysis of the actual cast made it possible to clearly determine the critical regions in the cast exposed to cracking and point to the causes of its occurrence. Proposals of changes in the bush die casting process were elaborated, in order to avoid hot tearing and cold cracking. The article discusses the results of preliminary tests being a prologue to the optimization of the die-casting process parameters of complex aluminium bronze thick-walled bushs.

Bronze analysis by k0-NAA and PIXE

International Nuclear Information System (INIS)

Arana, G.; Waetjen, U.; Ingelbrecht, C.; Robouch, P.

2003-01-01

Five copper alloys were prepared with modern powder metallurgical processes in the frame of the European project 'Improvement of Means of Measurement on Archaeological Copper-Alloys for Characterisation and Conservation (IMMACO)' and certified for As, Pb, Sn and Zn mass fractions. Similar in their composition to archaeological bronze alloys, these Certified Reference Materials (CRMs) are to be used for calibration of XRF instruments for characterization of archaeological samples either in the laboratory or in the field. Successful contribution of non-destructive analytical methods (k 0 -NAA and PIXE) to the IMMACO project and to the certification of the five reference materials is presented. (author)

Regional models of metal production in Western Asia in the Chalcolithic, Early and Middle Bronze Ages

Directory of Open Access Journals (Sweden)

Avilova, Liudmila

2008-06-01

Full Text Available The objective of this work is the reconstruction and comparative analysis of regional models of metal production in the Chalcolithic, Early and Middle Bronze Ages. The work is based on the statistical analysis of unique computer database on archaeological metal finds from four regions of the Near East: Anatolia, Mesopotamia, the Levant, and Iran. The materials are analysed by four indicators: distribution by the chronological periods, artefacts’ function, proportion of used metals and copper- based alloys. The author presents a series of conclusions concerning the preconditions for the beginnings of metal production in Western Asia and the pioneering role of Iran in its emergence, the important role the piedmont territories played in the development of metal production, the leap-like pattern of production dynamics shown by the periods, and its relation to the spread of a producing economy, long-distance exchange, and the emergence of the early civilizations.

El objetivo de este trabajo es la reconstrucción y análisis comparativo de modelos regionales de producción metalúrgica del Calcolítico y la Edad del Bronce Inicial y Media. Se basa en el análisis estadístico de una base de datos única sobre hallazgos metálicos de cuatro regiones del Próximo Oriente: Anatolia, Mesopotamia, el Levante e Irán. Los materiales se analizan atendiendo a cuatro variables: períodos cronológicos, función de los artefactos, proporción de los metales usados y las distintas aleaciones del cobre. La autora aporta una serie de conclusiones respecto a las precondiciones para los inicios de la producción metalúrgica en el Oeste Asiático; sobre el papel pionero de Irán en su aparición; la importancia de los piedemontes en su desarrollo; el patrón no continuo que se observa en las dinámicas de producción por periodos; y su relación con la expansión de la economía de producción, el intercambio a larga distancia y la aparición de las

Employees Training Evaluation related to the Competency Standards in the Steel and Metalworking Industry in Boyacá, Colombia

Directory of Open Access Journals (Sweden)

Carlos Guillermo Carreno-Bodensiek

2016-12-01

Full Text Available This work presents the results of a research process applied to a sample of companies in the steel and metalworking sector in Boyacá, Colombia. The active workers are evaluated over the Occupational Competency Standards related to their daily activities. It also aims to highlight the formation priority of human talent for business, according to build up a level of competitiveness. Also, seeks to meet the need to train and develop skills and competencies in the workforce, taking into account the concepts of experts about training and developing proposals for management. This research is consistent with global trends in education and the requirements of standardization of training, why diagnoses and designs are focused on the functions of the companies related to the Standards of Competency.

Metallurgical and mechanical examinations of steel–copper joints arc welded using bronze and nickel-base superalloy filler materials

International Nuclear Information System (INIS)

Velu, M.; Bhat, Sunil

2013-01-01

Highlights: ► Optical and scanning electron microscopy show defect free weld interfaces. ► Energy dispersive spectroscopy shows low dilution level of the weld by Fe. ► XRD studies show no brittle intermetallic phases in the weld interfaces. ► Weld interfaces did not fail during tensile, transverse bending and impact tests. ► The joint exhibits superior strength properties than that of bronze filler. - Abstract: The paper presents metallurgical and mechanical examinations of joints between dissimilar metals viz. copper (UNSC11000) and alloy steel (En31) obtained by Shielded Metal Arc Welding (SMAW) using two different filler materials, bronze and nickel-base super alloy. The weld bead of the joint with bronze-filler displayed porosity, while that with nickel-filler did not. In tension tests, the weldments with bronze-filler fractured in the centre of the weld, while those with nickel-filler fractured in the heat affected zone (HAZ) of copper. Since the latter exhibited higher strength than the former, all the major tests were undertaken over the joints with nickel-filler alone. Scanning Electron Microscopy (SEM) coupled with Energy Dispersive Spectroscopy (EDS) indicated corrugated weld interfaces and favorable elemental diffusions across them. X-ray diffraction (XRD) studies around the weld interfaces did not reveal any detrimental intermetallic compounds. Transverse bending tests showed that flexural strengths of the weldments were higher than the tensile strengths. Transverse side bend tests confirmed good ductility of the joints. Shear strength of the weld-interface (Cu–Ni or Ni–steel) was higher than the yield strength of weaker metal. Microhardness and Charpy impact values were measured at all the important zones across the weldment

Interspecific variation in resistance of Asian, European, and North American birches (Betula spp.) to bronze birch borer (Coleoptera: Buprestidae).

Science.gov (United States)

Nielsen, David G; Muilenburg, Vanessa L; Herms, Daniel A

2011-06-01

Bronze birch borer (Agrilus anxius Gory) is the key pest of birches (Betula spp.) in North America, several of which have been recommended for ornamental landscapes based on anecdotal reports of borer resistance that had not been confirmed experimentally. In a 20-yr common garden experiment initiated in 1979 in Ohio, North American birch species, including paper birch (Betula papyrifera Marshall), 'Whitespire' gray birch (Betula populifolia Marshall), and river birch (Betula nigra L.), were much more resistant to bronze birch borer than species indigenous to Europe and Asia, including European white birch (Betula pendula Roth), downy birch (Betula pubescens Ehrh.), monarch birch (Betula maximowicziana Regel), and Szechuan white birch (Betula szechuanica Jansson). Within 8 yr of planting, every European white, downy, and Szechuan birch had been colonized and killed, although 100% of monarch birch had been colonized and 88% of these plants were killed after nine years. Conversely, 97% of river birch, 76% of paper birch, and 73% Whitespire gray birch were alive 20 yr after planting, and river birch showed no evidence of colonization. This pattern is consistent with biogeographic theory of plant defense: North American birch species that share a coevolutionary history with bronze birch borer were much more resistant than naïve hosts endemic to Europe and Asia, possibly by virtue of evolution of targeted defenses. This information suggests that if bronze birch borer were introduced to Europe or Asia, it could threaten its hosts there on a continental scale. This study also exposed limitations of anecdotal observation as evidence of host plant resistance.

On the regularities of structural transformations in copper-beryllium alloys during aging

International Nuclear Information System (INIS)

Tkhagapsoev, Kh.G.

1983-01-01

Peculiarities of elastic oscillations damping and those of the change of specific electric resistance taking place in the process of isothermal aging of the BrB2 bronze have been studied to determine the mechanism and kinetics of mutual transformations of precipitating phases in Cu-Be alloys. It is found out that isothermal aging of beryllium bronze BrB2 at 260... 400 deg C is accompanied by structural transitions connected with the decomposition of oversaturated α-solid solution. Formation of α phase nuclei (or transformation of Guinier-Preston zones) as well as their growth occur at the expense of cooperative-shift processes characterized by low activation energy (19.7...26.3 J/mol) and by considerable time of relaxation (tau approximately equal to 10 -1 -10 2 s)

Human spiruridiasis due to Physaloptera spp. (Nematoda: Physalopteridae in a grave of the Shahr-e Sukhteh archeological site of the Bronze Age (2800–2500 BC in Iran

Directory of Open Access Journals (Sweden)

Makki Mahsasadat

2017-01-01

Full Text Available Evidence of rare human helminthiasis in paleoparasitological records is scarce. we report here the finding of Physaloptera spp. eggs in a soil sample collected in the pelvic and sacrum bones area of a skeleton excavated from a grave of Shahr-e Sukhteh archeological site dating back to the Bronze Age. The site is located in southeastern Iran and has attracted the attention of numerous archeological teams owing to its vast expanse and diverse archeological findings since 1997. The spirurid nematodes Physaloptera spp. are rarely the cause of human helminthiasis nowadays, but this infection might not have been so rare in ancient populations such as those in the Shahr-e Sukhteh. Out of 320 skeletons analyzed in this study, only one parasitized individual was detected. This surprising result led us to suspect the role of nematophagous fungi and other taphonomic processes in possible false-negative results. This is the first paleoparasitological study on human remains in this archeological site and the first record of ancient human physalopterosis in the Middle East.

Improved multifilamentary Nb3Sn conductors produced by the titanium-bronze process

International Nuclear Information System (INIS)

Tachikawa, K.; Itoh, K.; Kamata, K.; Moriai, H.; Tada, N.

1985-01-01

The effects of a titanium addition to the bronze matrix of superconducting Nb 3 Sn wires have been investigated. The titanium addition to the matrix remarkably increases the Nb 3 Sn growth rate and the high-field, critical current density of the wire. An overall critical-current density of 3.8 . 10 4 A/cm 2 at 15 T has been obtained for the multifilamentary Nb/Cu-7.5 at.% Sn-0.4 at.% Ti wire with 4.7 μm-diameter 31 x 331 cores. The anisotropy in the critical current with respect to the field direction becomes larger with increasing aspect ratio of the rectangular-shaped multifilamentary wires. A 9.5 mm wide and 1.8mm thick Nb/Cu-7.5Sn-0.4Ti conductor with 5 μm-diameter 349 x 361=125 989 cores has been successfully fabricated on an industrial scale. This conductor carries a superconducting current of over 1300 A at 16.5 T. The newly developed Ti-bronze Nb 3 Sn conductor makes it feasible to generate a field of proportional 15 T in a large diameter bore. (orig.)

Generation of nanoparticles of bronze and brass by laser ablation in liquid

Energy Technology Data Exchange (ETDEWEB)

Sukhov, I.A. [Wave Research Center of A.M. Prokhorov General Physics Institute of the Russian Academy of Sciences, 38, Vavilov Street, 119991 Moscow (Russian Federation); Shafeev, G.A., E-mail: Shafeev@kapella.gpi.ru [Wave Research Center of A.M. Prokhorov General Physics Institute of the Russian Academy of Sciences, 38, Vavilov Street, 119991 Moscow (Russian Federation); Voronov, V.V. [Wave Research Center of A.M. Prokhorov General Physics Institute of the Russian Academy of Sciences, 38, Vavilov Street, 119991 Moscow (Russian Federation); Sygletou, M. [Institute of Electronic Structure and Laser, Foundation for Research and Technology—Hellas (IESL-FORTH), P.O. Box 1527, Heraklion 711 10 (Greece); Department of Physics, University of Crete, Vassilika Vouton, GR-711 10, Heraklion (Greece); Stratakis, E.; Fotakis, C. [Institute of Electronic Structure and Laser, Foundation for Research and Technology—Hellas (IESL-FORTH), P.O. Box 1527, Heraklion 711 10 (Greece)

2014-05-01

Nanoparticles of brass and bronze are generated by ablation of corresponding bulk targets in liquid ethanol. The experiments were performed using three pulsed lasers with different pulse duration: ytterbium fiber laser (80 ns), a Neodymium:YAG laser (10 ps), and femtosecond Ti:sapphire laser (200 fs). The generated nanoparticles (NPs) are characterized by UV–vis absorption spectroscopy, X-ray diffractometry, Raman scattering, and Transmission Electron Microscopy. The size of generated NPs lies in the range 10–25 nm depending on the laser source. The X-ray diffractometry reveals the change of phase composition of brass NPs compared to the initial target in case of ablation with 80 ns laser source, while with 10 ps laser pulses this effect is less pronounced. Brass NPs generated with pico- and femtosecond laser radiation show the plasmon resonance in the vicinity of 560 nm and no plasmon peak for NPs generated with longer laser pulses. Raman analysis shows the presence of Cu{sub 2}O in generated NPs. The stability of generated NPs of both brass and bronze to oxidation is compared to that of Cu NPs generated in similar experimental conditions.

Surface Analysis of Railway Buffers Heads Covered with Bronze Using Laser Cladding

Directory of Open Access Journals (Sweden)

Sitarz M.

2017-06-01

Full Text Available Railway buffers during the operation are staying in almost permanent contact with each other, creating friction node in the point of contact of two railway buffer heads. In consequence of overcoming track curves, turnouts and unevenness of track, the railway buffer heads moves relative to each other causing friction, which results in its wear. When the wear is excessive, it might be a reason to withdrawn vehicle from service, it causes flattening of buffer head, and in consequence its abnormal cooperation. To avoid this phenomenon the buffer heads should be covered with graphitized grease, but this method has many disadvantages. Accordingly, it was found that it would be beneficial to cover the buffer head with bronze using laser cladding. In this article the metallographic and mechanical analysis of the newly created top layer of railway buffer head are presented. In article the results from tribological tests conducted on Amsler test bench are also presented. Based on test results described in article concluded that the layer of bronze coat on working surface of railway buffer head can be beneficial from operational point of view.

X-ray screening of the artificially deformed skulls from the Middle Bronze Age of the Low Volga region (paleopathology aspect

Directory of Open Access Journals (Sweden)

Pererva Evgenii Vladimirovich

2013-11-01

Full Text Available The impact of the deforming structure on the human skull is one of the most challenging and debated questions in modern archeology and anthropology related to artificial deformation of the skull. This is precisely why the present study attempts to study the pathological artificially deformed skulls of representatives of the Catacomb culture originating from burial mound in the Lower Volga region. The analysis of the bone material was carried out with the use of X-ray method of the frontal and lateral views. Thirteen radiographs of skulls with traces of deliberate artificial deformation were examined. The skull shapes, structure of the skull calvarial bones, state of the cranial sutures, signs of intracranial hypertension, and symptoms of vascular and endocrine pathologies were explored and evaluated. The study discovered that Catacomb culture bearers used a variety of methods of skull deformation. Front occipital, occipital ring strain and conventional acrocephaly deformation modes were revealed. The viability and compatibility with normal human activity of artificial skull deformation was observed. In the childhood and newborn periods, individuals have applied constrictive and restrictive devices, trusses andother appliancesfor a few years, their impact couldresultin the intracranial hypertension syndrome, as well as in problems with cranial sutures obliteration. It is very much likely that the use of strain could stimulate the development of the internal frontal hyperostosis (Morgagni's disease which contributed to the emergence of endocrine abnormities in humans. The increased trauma rate of skeleton bones was observed in population of the Middle Bronze Age, as well as ear diseases which makes us once again address the issue of social and cultural phenomenon of intentional artificial deformation of the head tradition.

Effect of Annealing Time for Quenching CuAl7Fe5Ni5W2Si2 Bronze on the Microstructure and Mechanical Properties

Directory of Open Access Journals (Sweden)

B. P. Pisarek

2012-04-01

Full Text Available This paper presents the influence of annealing time 30, 60 and 120 min at 1000°C for quenching CuAl7Fe5Ni5W2Si2 bronze in 10% water solution of NaCl, on the microstructure and mechanical properties. The presented results concern the species newly developed aluminum-iron-nickel bronze, with additions W and Si.In order to determine changes in the microstructure of the hardened bronze metallographic studies were performed on cylindrical samples of diameter 10 mm, on the metallographic microscope with digital image analysis, X-ray phase analysis, EDX point with the digital recording on the computer. Specified percentage of the microstructure of martensite and bainite, participation of proeutectoid α phase in the microstructure, grain size of former β phase, the amount of dissolved κ phase.It was found that in the microstructure of bronze in the cast state, there are a number of intermetallic phases of κ type. At interphase boundaries of primary intermetallic faceted precipitates, especially rich in tungsten (IM_W, nucleate and grow dendritic primary intermetallic κI phases, with chemical composition similar to the type of Fe3Si iron silicide.Dissolved, during the heating, in the β phase are all the intermediate phase included in the microstructure, with the exception of primary intermetallic phases of tungsten and κI. Prolongation of the isothermal annealing causes coagulation and coalescence of primary phases. In microstructure of the bronze after quenching obtained the α phase precipitation on the grain boundary of secondary β phase, coarse bainite and martensite, for all annealing times. With the change of annealing time are changed the relative proportions of individual phases or their systems, in the microstructure. In the microstructure of bronze, hold at temperature of 1000°C for 60 min, after quenching martensitic microstructure was obtained with the primary phases, and the least amount of bainite.

Abnormal photothermal effect of laser radiation on highly defect oxide bronze nanoparticles under the sub-threshold excitation of absorption

Science.gov (United States)

Gulyaev, P.; Kotvanova, M.; Omelchenko, A.

2017-05-01

The mechanism of abnormal photo-thermal effect of laser radiation on nanoparticles of oxide bronzes has been proposed in this paper. The basic features of the observed effect are: a) sub-threshold absorption of laser radiation by the excitation of donor-like levels formed in the energy gap due to superficial defects of the oxide bronze nano-crystals; b) an interband radiationless transition of energy of excitation on deep triplet levels and c) consequent recombination occurring at the plasmon absorption. K or Na atoms thermally intercalated to the octahedral crystal structure of TiO2 in the wave SHS combustion generate acceptor levels in the gap. The prepared oxide bronzes of the non-stoichiometric composition NaxTiO2 and KxTiO2 were examined by high resolution TEM, and then grinded in a planetary mill with powerful dispersion energy density up to 4000 J/g. This made it possible to obtain nanoparticles about 50 nm with high surface defect density (1017-1019 cm-2 at a depth of 10 nm). High photo-thermal effect of laser radiation on the defect nanocrystals observed after its impregnation into cartilaginous tissue exceeds 7 times in comparison with the intact ones.

Y-chromosome phylogeographic analysis of the Greek-Cypriot population reveals elements consistent with Neolithic and Bronze Age settlements.

Science.gov (United States)

Voskarides, Konstantinos; Mazières, Stéphane; Hadjipanagi, Despina; Di Cristofaro, Julie; Ignatiou, Anastasia; Stefanou, Charalambos; King, Roy J; Underhill, Peter A; Chiaroni, Jacques; Deltas, Constantinos

2016-01-01

The archeological record indicates that the permanent settlement of Cyprus began with pioneering agriculturalists circa 11,000 years before present, (ca. 11,000 y BP). Subsequent colonization events followed, some recognized regionally. Here, we assess the Y-chromosome structure of Cyprus in context to regional populations and correlate it to phases of prehistoric colonization. Analysis of haplotypes from 574 samples showed that island-wide substructure was barely significant in a spatial analysis of molecular variance (SAMOVA). However, analyses of molecular variance (AMOVA) of haplogroups using 92 binary markers genotyped in 629 Cypriots revealed that the proportion of variance among the districts was irregularly distributed. Principal component analysis (PCA) revealed potential genetic associations of Greek-Cypriots with neighbor populations. Contrasting haplogroups in the PCA were used as surrogates of parental populations. Admixture analyses suggested that the majority of G2a-P15 and R1b-M269 components were contributed by Anatolia and Levant sources, respectively, while Greece Balkans supplied the majority of E-V13 and J2a-M67. Haplotype-based expansion times were at historical levels suggestive of recent demography. Analyses of Cypriot haplogroup data are consistent with two stages of prehistoric settlement. E-V13 and E-M34 are widespread, and PCA suggests sourcing them to the Balkans and Levant/Anatolia, respectively. The persistent pre-Greek component is represented by elements of G2-U5(xL30) haplogroups: U5*, PF3147, and L293. J2b-M205 may contribute also to the pre-Greek strata. The majority of R1b-Z2105 lineages occur in both the westernmost and easternmost districts. Distinctively, sub-haplogroup R1b- M589 occurs only in the east. The absence of R1b- M589 lineages in Crete and the Balkans and the presence in Asia Minor are compatible with Late Bronze Age influences from Anatolia rather than from Mycenaean Greeks.

Stress Analysis and Fatigue Behaviour of PTFE-Bronze Layered Journal Bearing under Real-Time Dynamic Loading

Science.gov (United States)

Duman, M. S.; Kaplan, E.; Cuvalcı, O.

2018-01-01

The present paper is based on experimental studies and numerical simulations on the surface fatigue failure of the PTFE-bronze layered journal bearings under real-time loading. ‘Permaglide Plain Bearings P10’ type journal bearings were experimentally tested under different real time dynamic loadings by using real time journal bearing test system in our laboratory. The journal bearing consists of a PTFE-bronze layer approximately 0.32 mm thick on the steel support layer with 2.18 mm thick. Two different approaches have been considered with in experiments: (i) under real- time constant loading with varying bearing widths, (ii) under different real-time loadings at constant bearing widths. Fatigue regions, micro-crack dispersion and stress distributions occurred at the journal bearing were experimentally and theoretically investigated. The relation between fatigue region and pressure distributions were investigated by determining the circumferential pressure distribution under real-time dynamic loadings for the position of every 10° crank angles. In the theoretical part; stress and deformation distributions at the surface of the journal bearing analysed by using finite element methods to determine the relationship between stress and fatigue behaviour. As a result of this study, the maximum oil pressure and fatigue cracks were observed in the most heavily loaded regions of the bearing surface. Experimental results show that PTFE-Bronze layered journal bearings fatigue behaviour is better than the bearings include white metal alloy.

Prevention of Dealloying in Manganese Aluminium Bronze Propeller: Part II

Directory of Open Access Journals (Sweden)

Napachat Tareelap

2014-03-01

Full Text Available Due to the failure of manganese aluminium bronze (MAB propeller caused by dealloying corrosion as described in Part I [1], this work aims to study the prevention of dealloying corrosion using aluminium and zinc sacrificial anodes. The results indicated that both of the sacrificial anodes could prevent the propeller from dealloying. Moreover, the dealloying in seawater was less than that found in brackish water. It was possible that hydroxide ions, from cathodic reaction, reacted with calcium in seawater to form calcium carbonate film protecting the propeller from corrosion.

Development of technology and properties investigation of steel/bronze joints proposed for ITER HHF components manufacturing

International Nuclear Information System (INIS)

Kalinin, G.; Krestnikov, N.S.; Strebkov, Y.S.; Abramov, V.Y.; Gervash, A.; Mazul, I.; Zolotarev, V.B.; Fabritsiev, S.A.

2007-01-01

Full text of publication follows: During the development of ITER HHF components manufacturing it is necessary to provide reliable joints between heat sink material made of CuCrZr bronze and the supporting construction made of austenitic steel. Four different methods have been tried out: - Hot Isostatic Pressing (HIP), - HIP assisted brazing, - furnace assisted brazing, - Casting. The investigation of structure and properties of joints show that HIP and casting provide the better results than the other technologies. However, HIP is relatively expensive technology, and big size HIP furnace is required for the full scale components manufacturing that are not available n RF now. Therefore, casting was selected as a reference manufacturing technology for the primary wall of ITER modules n RF. The paper summarizes the results of bronze/steel joints manufacturing and investigation of their properties. (authors)

The Romanesque Bronze Doors at Gniezno Cathedral Church: Some New Remarks

Directory of Open Access Journals (Sweden)

Tomasz Węcławowicz

2017-06-01

Full Text Available Among many Romanesque bronze doors in Europe the old entrance doors of the metropolitan cathedral in Gniezno, in the North Poland, are exceptional. For over a century many historians and historians of art have been trying to understand and explain its iconographic phenomenon. The Polish, Czech and German scholars have so far been unable to identify with any conviction, either the iconographic models or artistic provenance of the workshop. There were suggested some connections of the alleged bishop patrons to France and there were emphasizes technological possibilities of foundry workshops at the Meuse Valley. This “Meuse hypothesis” based mainly on historical suggestions became established as a certainty. However, it is important to emphasize the significant difference between the creator of the composition and of the craftsman who cast the bronze door. Years ago only Lech Kalinowski pointed out some general formal similarities to the North Italian sculpture. The purpose of this paper is to develop Kalinowski’s suggestions and to emphasise the puzzling similarities between details of Gniezno doors and some Emilian works executed by Master Wiligelmo da Modena and Master Nicolò. The concept of Italian relationship from Emilia province seems to be better for the comparative analysis than relationship with Meuse Valley based mostly on historical context. Crucial here is the additional, parallel analysis of the portal decoration in Czerwinsk Abbey.

Bronze Age Acrobats

DEFF Research Database (Denmark)

Iversen, Rune

2014-01-01

. The exact same appearance is found on Egyptian depictions related to ceremonies and festivals.OnMinoan Crete backwards-bent acrobats are related to bull leaping and bull ceremonies. Despite local variations, backwards-bent acrobatic performances carried out by topless female actorswere part...

Dissolution of copper, tin, and iron from sintered tungsten-bronze spheres in a simulated avian gizzard, and an assessment of their potential toxicity to birds

International Nuclear Information System (INIS)

Thomas, Vernon G.; McGill, Ian R.

2008-01-01

The rates of dissolution of copper, tin, and iron from sintered tungsten-bronze spheres (51.1%W, 44.4%Cu, 3.9%Sn, 0.6%Fe, by mass) were measured in an in vitro simulated avian gizzard at pH 2.0, and 42C. Most of the spheres had disintegrated completely to a fine powder by day 14. Dissolution of copper, tin, and iron from the spheres was linear over time; all r > 0.974; all P < 0.001. The mean rate of release of copper, tin, and iron was 30.4 mg, 2.74 mg, and 0.38 mg per g tungsten-bronze per day, respectively. These rates of metal release were compared to those in published studies to determine whether the simultaneous ingestion of eight spheres of 3.48 mm diameter would pose a toxic risk to birds. The potential absorption rates of iron and tin (0.54 mg Fe/day, and 3.89 mg Sn/day) from eight tungsten-bronze spheres of total mass 1.42 g would not prove toxic, based on empirical studies of tin and iron ingestion in waterfowl. The release of 43.17 mg copper/day from eight tungsten-bronze spheres, while exceeding the daily copper requirements of domesticated birds, is far below the levels of copper known to cause copper toxicosis in birds. We conclude that sintered tungsten-bronze material made into gunshot, fishing weights, or wheel balance weights, would not pose a toxic risk to wild birds when ingested

Prevention of hand eczema in the metal-working industry: risk awareness and behaviour of metal worker apprentices.

Science.gov (United States)

Itschner, L; Hinnen, U; Elsner, P

1996-01-01

In the metal-working industry, occupational hand eczema is very common and often due to contact with cutting fluids. Since it can be avoided by adequate protective measures, prevention plays an important role. However, the effectiveness of prevention depends heavily on the employees' awareness of this health risk. The study aimed to collect information on the attitude of metal worker apprentices towards the risk of occupational skin disorders and skin protection since it is believed that their attitude at the beginning of the education will guide their future risk behaviour. By means of a questionnaire, 79 metal worker apprentices were interviewed about their awareness of dermal risk factors and their risk behaviour at work. The apprentices are very badly informed about skin diseases and skin care. Most of them are not concerned about developing occupational skin problems, and they declared having obtained very little information about this subject. Considering this finding, it seems urgent to intensify health and safety education already at the beginning of the apprenticeship.

Electronic band structure and charge density wave transition in quasi-2D KMo6O17 purple bronze

Science.gov (United States)

Valbuena, M. A.; Avila, J.; Vyalikh, D. V.; Guyot, H.; Laubschat, C.; Molodtsov, S. L.; Asensio, M. C.

2008-03-01

High resolution angle-resolved photoemission of quasi-2D KMo6O17 purple bronze has been performed in the range from room temperature to 130 K, slightly above the charge density wave (CDW) transition (Tc = 110 K), and down to 35 K (well below Tc). In this paper we report a detailed study of how electronic band structure is affected by this transition driven by the hidden nesting scenario. The expected spectroscopic fingerprints of the CDW phase transition have been found and discussed according to the hidden one dimension and the development of a quasi-commensurate CDW. The excellent agreement between theory and our experimental results makes of potassium purple bronze a reference system for studying this type of instabilities.

Electronic band structure and charge density wave transition in quasi-2D KMo6O17 purple bronze

International Nuclear Information System (INIS)

Valbuena, M A; Avila, J; Asensio, M C; Vyalikh, D V; Laubschat, C; Molodtsov, S L; Guyot, H

2008-01-01

High resolution angle-resolved photoemission of quasi-2D KMo 6 O 17 purple bronze has been performed in the range from room temperature to 130 K, slightly above the charge density wave (CDW) transition (T c = 110 K), and down to 35 K (well below T c ). In this paper we report a detailed study of how electronic band structure is affected by this transition driven by the hidden nesting scenario. The expected spectroscopic fingerprints of the CDW phase transition have been found and discussed according to the hidden one dimension and the development of a quasi-commensurate CDW. The excellent agreement between theory and our experimental results makes of potassium purple bronze a reference system for studying this type of instabilities

Age estimation by 3D CT-scans of the Borremose Woman, a Danish bog body

DEFF Research Database (Denmark)

Villa, Chiara; Møller Rasmussen, Maria; Lynnerup, Niels

2011-01-01

Non-invasive estimation of age at death has been carried out by using 3D CT scanning of a bog body discovered in 1948 in a peat bog in Borremose (Denmark). The bog body has been dated to the 8th century BC, in the last part of the Bronze Age. The skeletal structures useful for age estimation have...

Exposition and Synthesis of Benin Bronze Casting: Emphasis on the Olotan Casters of Benin

Science.gov (United States)

Ifeta, Chris Funke

2016-01-01

The introduction of Western education to Nigeria has brought in its wake great strides toward development. Changes in Benin dates far back to the dawn of the 20th century. This paper investigates the critical role of education in development. The paper integrates interview data collected from bronze casters in Benin. The first section of the paper…

Roman Bronze Vessels From the Late Sarmatian Burial of the Lebedevka Burial-Ground in Western Kazakhstan

Directory of Open Access Journals (Sweden)

Treister Mikhail Yuryevich

2015-12-01

Full Text Available This paper is devoted to studying cultural monuments – bronze vessels, a jug and a basin from the barrow no. 1/1967 of the Lebedevka Late Sarmatian burial mound (Western Kazakhstan, dating back to the middle of the 3rd century AD at the latest. These items do not find exact parallels among the bronze vessels of provincial Rome. Although the shape of the jug handle with a curved leaf turned upright between two horizontally arranged swan heads has parallels on the so-called “composite jug with handles” (“gegliederten Henkelkrügen”, the cylindrical form of the jug’s neck peculiar of the glass jugs of allegedly Syrian manufacture of the second half of the 3rd-4th centuries AD is very unusual. Even more unusual is a basin with horizontally bent rim and elaborate handles with pearls on a high narrow stand-ring. The XRF analyses of the Lebedevka jug’s metal revealed that its body and handle were made of a copper-based alloy with very high admixtures of zinc (24-27 % and inconsiderable additions of lead (up to 3 %. A similar alloy was used for manufacturing a vessel in the form of a crouching young negro from Niederbieber. Most objects of provincial Roman import reached Western Kazakhstan via the Bosporan kingdom along the Northern branch of the Silk Road. The above discussed bronze vessels from Lebedevka let suggest, that the nomads could receive some import articles that were brought along the caravan routes leading from Egypt and Syria to the East.

Ordering of Nb3Sn layer formed in the bronze process

International Nuclear Information System (INIS)

Agarwal, S.K.; Nagpal, K.C.; Narlikar, A.G.

1986-01-01

The work reported here suggests that the ordering of superconducting Nb 3 Sn compound layers formed in the bronze process is much more intriguing than previously assumed. Various possible mechanisms of ordering of the layers have been examined in conjunction with the observed data on short duration annealed samples. The analysis suggests the ordering to be governed by a sequential operation of both Ist and IInd order kinetics, and seems to fall in line with the studies on disordered bulk samples annealed for long durations. (author)

Analysis of selective laser cleaning of patina on bronze coins

International Nuclear Information System (INIS)

Buccolieri, G; Nassisi, V; Castellano, A; Di Giulio, M; Giuffreda, E; Delle Side, D; Velardi, L; Torrisi, L; Buccolieri, A

2014-01-01

The patina, is the result of a large number of chemical, electrochemical and physical processes which occur spontaneously during interaction of metal surfaces with the environment. In this work we want to analyze and remove the patina in artefacts, exposed to atmosphere for various decades. Here, experimental results about the laser cleaning of bronze coins by KrF (248 nm) and Nd:YAG (532 nm) lasers are reported. Both laser wavelengths were efficient to reduce the chlorine concentration on the surface of the coins more than 80 %, as demonstrated by Energy Dispersive X-Ray Fluorescence analyses.

Empire Without A Voice Phoenician Iron Metallurgy and Imperial Strategy at Carthage

Science.gov (United States)

Kaufman, Brett Sanford

The role of iron in the emergence of Iron Age states in North Africa and the Near East has been poorly understood due to a paucity of contemporary, diachronic ferrous archaeometallurgical data. Excavations at Phoenician and Punic Carthage in the 2000s recovered one of the largest and most diverse corpora of Iron Age iron production material culture from North Africa and the Near East, spanning the entire history of Carthage from its Tyrian colonial foundations to its destruction by Rome (historical dates 814--146 BC). Analysis of the materials employing metallography, portable X-ray fluorescence spectroscopy (pXRF), and variable pressure scanning electron microscopy coupled with energy x-ray dispersive spectroscopy (VPSEM-EDS) indicates that Carthaginian smiths were smelting and smithing wrought iron and steel as an exchange good or tribute commodity to Tyre and the Assyrian empire, as well as producing, refining, and consuming tin and arsenical bronzes, leaded bronzes, lead, and cobalt. Archaeological evidence demonstrates a state industry of iron production, including the commissioning, decommissioning, and outsourcing of metallurgical precincts. There is an overwhelming difference exhibited between output capacity at industrial and household production sites. Epigraphic evidence in Punic illustrates the inherent economic and familial affiliations between the Carthaginian state and metalworkers. Ironsmiths, bronze casters, and goldsmiths were privileged engineers of one of the state's most strategic industries, and were stratified in a hierarchy of technical specialties and ranks. In order to conserve fuel and succeed in properly vitrifying ore or bloom impurities into slag, they recycled industrial byproducts in the form of murex shells from purple dye production as a metallurgical flux and lined the furnaces with quartz-rich heat insulation. Carthage was one colony in the Phoenician commodity procurement network, whose task it was to convert iron blooms into

A Method to Make Classification of the Heat Treatment Processes Performed on Bronze Using Incomplete Knowledge

Directory of Open Access Journals (Sweden)

Kluska-Nawarecka S.

2014-06-01

Full Text Available The article describes the problem of selection of heat treatment parameters to obtain the required mechanical properties in heat- treated bronzes. A methodology for the construction of a classification model based on rough set theory is presented. A model of this type allows the construction of inference rules also in the case when our knowledge of the existing phenomena is incomplete, and this is situation commonly encountered when new materials enter the market. In the case of new test materials, such as the grade of bronze described in this article, we still lack full knowledge and the choice of heat treatment parameters is based on a fragmentary knowledge resulting from experimental studies. The measurement results can be useful in building of a model, this model, however, cannot be deterministic, but can only approximate the stochastic nature of phenomena. The use of rough set theory allows for efficient inference also in areas that are not yet fully explored.

An approach for evaluating the respiratory irritation of mixtures: application to metalworking fluids.

Science.gov (United States)

Schaper, M M; Detwiler-Okabayashi, K A

1995-01-01

Recently, the sensory and pulmonary irritating properties of ten metalworking fluids (MWF) were assessed using a mouse bioassay. Relative potency of the MWFs was estimated, but it was not possible to identify the component(s) responsible for the the respiratory irritation induced by each MWF. One of the ten fluids, MWF "ET", produced sensory and pulmonary irritation in mice, and it was of moderate potency in comparison to the other nine MWFs. MWF "E" had three major components: tall oil fatty acids (TOFA), sodium sulfonate (SA), and paraffinic oil (PO). In the present study, the sensory and pulmonary irritating properties of these individual components of MWF "E" were evaluated. Mixtures of the three components were also prepared and similarly evaluated. This analysis revealed that the sensory irritation from MWF "E" was largely due to TOFA, whereas SA produced the pulmonary irritation observed with MWF "E". Both TOFA and SA were more potent irritants than was MWF "E", and the potency of TOFA and/or SA was diminished through combination with PO. There was no evidence of synergism of the components when combined to form MWF "E". This approach for identifying the biologically "active" component(s) in a mixture should be useful for other MWFs. Furthermore, the approach should be easily adapted for other applications involving concerns with mixtures.

Maternal and paternal genetic diversity of ancient sheep in Estonia from the Late Bronze Age to the post-medieval period and comparison with other regions in Eurasia.

Science.gov (United States)

Rannamäe, E; Lõugas, L; Niemi, M; Kantanen, J; Maldre, L; Kadõrova, N; Saarma, U

2016-04-01

Sheep were among the first domesticated animals to appear in Estonia in the late Neolithic and became one of the most widespread livestock species in the region from the Late Bronze Age onwards. However, the origin and historical expansion of local sheep populations in Estonia remain poorly understood. Here, we analysed fragments of the hypervariable D-loop of mitochondrial DNA (mtDNA; 213 bp) and the Y-chromosome SRY gene (130 bp) extracted from 31 archaeological sheep bones dated from approximately 800 BC to 1700 AD. The ancient DNA data of sheep from Estonia were compared with ancient sheep from Finland as well as a set of contemporary sheep breeds from across Eurasia in order to place them in a wider phylogeographical context. The analysis shows that: (i) 24 successfully amplified and analysed mtDNA sequences of ancient sheep cluster into two haplogroups, A and B, of which B is predominant; (ii) four of the ancient mtDNA haplotypes are novel; (iii) higher mtDNA haplotype diversity occurred during the Middle Ages as compared to other periods, a fact concordant with the historical context of expanding international trade during the Middle Ages; (iv) the proportion of rarer haplotypes declined during the expansion of sheep from the Near Eastern domestication centre to the northern European region; (v) three male samples showed the presence of the characteristic northern European haplotype, SNP G-oY1 of the Y-chromosome, and represent the earliest occurrence of this haplotype. Our results provide the first insight into the genetic diversity and phylogeographical background of ancient sheep in Estonia and provide basis for further studies on the temporal fluctuations of ancient sheep populations. © 2016 Stichting International Foundation for Animal Genetics.

$Nb_{3}Sn macrostructure, microstructure, and property comparisons for bronze and internal Sn process strands

CERN Document Server

Lee, P J; Larbalestier, D C

2000-01-01

The variation in irreversibility field, B*(T), with temperature has been measured for Nb/sub 3/Sn superconducting strands manufactured for ITER using vibrating sample and SQUID magnetometers. The high performance strands were developed for both high transport critical current density, J/sub c/, and low hysteresis loss. Despite a wide variety of designs and components, the strands could be split into two distinctive groups, based on the extrapolated irreversibility fields, which lie about 10% lower than the upper critical field. "Bronze-process" strands exhibited consistently higher B*(T) (28 T to 31 T) compared with "internal Sn" process (24 T to 26 T) conductors. The intrinsic critical current density of the superconductor, J/sub c (sc)/, and the specific pinning force of the grain boundaries, Q/sub gb/, were evaluated using the measured J/sub c/, and image analysis of the macro- and micro-structures. A bronze-processed Nb(-Ta)/sub 3 /Sn was found to have a higher J/sub c(sc)/ but lower Q/sub gb/ than Nb/sub...

Synthesis and ferroelectric properties of rare earth compounds with tungsten bronze-type structure

Energy Technology Data Exchange (ETDEWEB)

Bouziane, M., E-mail: bouzianemeryem@yahoo.fr [Laboratoire de Chimie du Solide Appliquee, Faculte des Sciences, Avenue Ibn Batouta, BP 1014, Rabat (Morocco); Taibi, M. [Laboratoire de Physico-Chimie des Materiaux, LAF 502, Ecole Normale Superieure, BP 5118, Rabat (Morocco); Boukhari, A. [Laboratoire de Chimie du Solide Appliquee, Faculte des Sciences, Avenue Ibn Batouta, BP 1014, Rabat (Morocco)

2011-10-03

Highlights: {center_dot} Polycrystalline materials with the tungsten bronze-type structure have been synthesized and characterized. {center_dot} Effect of the incorporation of rare earth ions and paramagnetic cations (Fe{sup 3+}) into a matrix ferroelectrically active was studied. {center_dot} Ferroelectric transition is pronounced by a large thermal hysteresis during the heating and cooling cycles. {center_dot} Phase transitions around T{sub c} were confirmed by differential scanning calorimetry (DSC) measurements. - Abstract: Polycrystalline materials with a general formula Pb{sub 2}Na{sub 0.8}R{sub 0.2}Nb{sub 4.8}Fe{sub 0.2}O{sub 15} (R = Dy, Eu, Sm, Nd, La) have been synthesized, in air by a high temperature solid state reaction method. X-ray diffraction study, at room temperature, revealed that they crystallize in the tungsten bronze-type structure. Dielectric properties were performed, in the temperature range 25-500 deg. C, at three different frequencies 10, 100 and 1000 kHz. The ferroelectric transition is pronounced by a large thermal hysteresis during the heating and cooling cycles. The determined Curie temperature values T{sub c} were discussed as a function of rare earth size. Phase transitions around T{sub c} for the investigated compounds were confirmed by differential scanning calorimetry (DSC) measurements.

Materials for the study of the bronze age in the valley of the Vinalopo (Alicante | Materiales para el estudio de la Edad del Bronce en el Valle Medio del Vinalopó (Alicante | Materiales para el estudio de la Edad del Bronce en el Valle Medio del Vinalopó (Alicante

Directory of Open Access Journals (Sweden)

Juan Francisco Navarro Mederos

1982-12-01

Full Text Available Se presenta un grupo de poblados del Bronce en el Valle Medio del Vinalopó, provincia de Alicante, y los materiales procedentes de ellos y conservados en colecciones privadas. Su conocimiento permite incluir esta comarca en la cultura del Bronce Valenciano —aunque manteniendo una cierta personalidad— y aventurar hipótesis sobre la dinámica de la Edad del Bronce a lo largo de la cuenca del Vinalopó, sus contactos exteriores, las fronteras con el mundo argárico e intentar ordenarlos cronológicamente en base a un esquema propuesto para la globalidad del Bronce Valenciano. | L'article offre l'étude d'un groupe de sites de l'âge du Bronze dans la vallée du Vinalopó et des matériaux archéologiques conservés dans des collections privées. Des resultats de cet étude on peut inférer l'appartenance de cette zone a la civilisation du Bronze Valenciano, tout en conservant des traits individuants, et aussi tenter d'expliquer la dynamique de l'âge du Bronze au long de la vallée du Vinalopó, ses rapports extérieurs et la frontière avec la civilisation de l'Argar. On donne également une tentative de chronologie fondee sur un schéma global pour le Bronze Valenciano.

Moessbauer effect study of hyperfine interaction of /sup 161/Dy and /sup 151/Eu in tungsten bronzes Dysub(0. 18) WO/sub 3/ and Eusub(0. 18) WO/sub 3/

Energy Technology Data Exchange (ETDEWEB)

Kisynska, K

1979-01-01

The Moessbauer technique was used to investigate the hyperfine interaction of /sup 161/Dy and /sup 151/Eu in cubic rare earth tungsten bronzes: Dysub(0.18)WO/sub 3/ and Eusub(0.18)WO/sub 3/. Well resolved hfs spectrum was obtained at 4.2 K for Dysub(0.18)WO/sub 3/. The effective hf field approximation sufficed to interpret the spectrum. The obtained hyperfine interaction parameters were: -g/sub 0/..beta..sub(N)Hsub(eff)=(805+-19) Mc/s and e/sup 2/qQ/sub 0//4 = (506+-56) Mc/s. These results imply that ground doublet of Dy/sup +3/ ion in bronze is a Kramers doublet Vertical Bar+-15/2> with asymmetrical hyperfine tensor Asub(z) non equal to 0, Asub(x) = Asub(y) = 0 and that local crystalline field at RE metal in tungsten bronze at 4.2 K cannot be cubic. From ME absorption spectra of Eusub(0.18)WO/sub 3/ taken at 4.2 K, 78 K and 300 K the values of quadrupole interaction constants for bronze lattice and its temperature dependence were obtained. These data indicate that a phase transition from the high temperature ideal perovskite structure to a distorted one occurs in RE bronzes and that the distortion concerns the nearest tungsten-oxygen environment of RE ion.

Lemna minor tolerance to metal-working fluid residues: implications for rhizoremediation.

Science.gov (United States)

Grijalbo, L; Becerril, J M; Barrutia, O; Gutierrez-Mañero, J; Lucas Garcia, J A

2016-07-01

For the first time in the literature, duckweed (Lemna minor) tolerance (alone or in combination with a consortium of bacteria) to spent metal-working fluid (MWF) was assessed, together with its capacity to reduce the chemical oxygen demand (COD) of this residue. In a preliminary study, L. minor response to pre-treated MWF residue (ptMWF) and vacuum-distilled MWF water (MWFw) was tested. Plants were able to grow in both residues at different COD levels tested (up to 2300 mg·l(-1) ), showing few toxicity symptoms (mainly growth inhibition). Plant response to MWFw was more regular and dose responsive than when exposed to ptMWF. Moreover, COD reduction was less significant in ptMWF. Thus, based on these preliminary results, a second study was conducted using MWFw to test the effectiveness of inoculation with a bacterial consortium isolated from a membrane bioreactor fed with the same residue. After 5 days of exposure, COD in solutions containing inoculated plants was significantly lower than in non-inoculated ones. Moreover, inoculation reduced β+γ-tocopherol levels in MWFw-exposed plants, suggesting pollutant imposed stress was reduced. We therefore conclude from that L. minor is highly tolerant to spent MWF residues and that this species can be very useful, together with the appropriate bacterial consortium, in reducing COD of this residue under local legislation limits and thus minimise its potential environmental impact. Interestingly, the lipophilic antioxidant tocopherol (especially the sum of β+γ isomers) proved to be an effective plant biomarker of pollution. © 2016 German Botanical Society and The Royal Botanical Society of the Netherlands.

Electronic band structure and charge density wave transition in quasi-2D KMo{sub 6}O{sub 17} purple bronze

Energy Technology Data Exchange (ETDEWEB)

Valbuena, M A [Instituto de Ciencia de Materiales de Madrid, CSIC, 28049 Madrid (Spain); Avila, J; Asensio, M C [Synchrotron SOLEIL, L' Orme des Merisiers, Saint-Aubin, B.P. 48, 91192 Gif-sur-Yvette Cedex (France); Vyalikh, D V; Laubschat, C; Molodtsov, S L [Institut fuer Festkoerperphysik, Technische Universitaet Dresden, D-01062 Dresden (Germany); Guyot, H [LEPES, CNRS, BP 166, 38042 Grenoble Cedex 9 (France)], E-mail: mvbuena@icmm.csic.es

2008-03-15

High resolution angle-resolved photoemission of quasi-2D KMo{sub 6}O{sub 17} purple bronze has been performed in the range from room temperature to 130 K, slightly above the charge density wave (CDW) transition (T{sub c} = 110 K), and down to 35 K (well below T{sub c}). In this paper we report a detailed study of how electronic band structure is affected by this transition driven by the hidden nesting scenario. The expected spectroscopic fingerprints of the CDW phase transition have been found and discussed according to the hidden one dimension and the development of a quasi-commensurate CDW. The excellent agreement between theory and our experimental results makes of potassium purple bronze a reference system for studying this type of instabilities.

BRONZ KATKILI POLİ-TETRA-FLOR-ETİLEN (PTFE) KOMPOZİTLERİN PASLANMAZ ÇELİK MALZEMEYE KARŞI AŞINMA VE SÜRTÜNME DAVRANIŞLARI

OpenAIRE

Ünal, Hüseyin; Yetkin, Salih Hakan; Poyraz, Bayram

2018-01-01

Bu deneysel çalışmada, katkısızpoli-tetra-flor-etilen (PTFE) polimeri ile %25 bronz katkılı PTFE kompoziti ve%40 bronz katkılı PTFE kompozitlerin, kuru kayma şartları altında paslanmazçelik malzemeye karşı tribolojik performansları incelenmiştir. Tribolojiktestler, pim-disk aşınma cihazında ve oda sıcaklığında gerçekleştirilmiştir.Aşınma ve sürtünme testleri, 50N, 100N ve 150N yüklerde ve 1.0, 1.5 ve 2.0m/skayma hızlarında yapılmıştır. Aşınma test sonuçlarına göre, %40 bronz katkılıPTFE kompo...

Fast polarization mechanisms in the uniaxial tungsten-bronze relaxor strontium barium niobate SBN-81

Czech Academy of Sciences Publication Activity Database

Buixaderas, Elena; Kadlec, Christelle; Kempa, Martin; Bovtun, Viktor; Savinov, Maxim; Bednyakov, Petr; Hlinka, Jiří; Dec, J.

2017-01-01

Roč. 7, Dec (2017), s. 1-11, č. článku 18034. ISSN 2045-2322 R&D Projects: GA ČR GA16-09142S; GA MŠk(CZ) LD15014 Institutional support: RVO:68378271 Keywords : relaxor * tungsten-bronzes * dielectric response * phonons * broad-band spectroscopy Subject RIV: BM - Solid Matter Physics ; Magnetism OBOR OECD: Condensed matter physics (including formerly solid state physics, supercond.) Impact factor: 4.259, year: 2016

Curly malachite on archaeological bronze : A systematic study of the shape and phenomenological approach of its formation mechanism

NARCIS (Netherlands)

Nienhuis, J.; Robbiola, Luc; Giuliani, Roberta; Joosten, Ineke; Huisman, Hans; van Os, Bertil; Sietsma, J.

2016-01-01

Curly malachite (CM) is found as a green cupric carbonate hydroxide corrosion product on archaeological bronze, mostly on artefacts retrieved from graves. In this paper, a morphological characterization approach is proposed, enabling the investigation of the formation process of CM. It is suggested

Qualitative and quantitative laser-induced breakdown spectroscopy of bronze objects

International Nuclear Information System (INIS)

Tankova, V; Blagoev, K; Grozeva, M; Malcheva, G; Penkova, P

2016-01-01

Laser-induced breakdown spectroscopy (LIBS) is an analytical technique for qualitative and quantitative elemental analysis of solids, liquids and gases. In this work, the method was applied for investigation of archaeological bronze objects. The analytical information obtained by LIBS was used for qualitative determination of the elements in the material used for manufacturing of the objects under study. Quantitative chemical analysis was also performed after generating calibration curves with standard samples of similar matrix composition. Quantitative estimation of the elemental concentration of the bulk of the samples was performed, together with investigation of the surface layer of the objects. The results of the quantitative analyses gave indications about the manufacturing process of the investigated objects. (paper)

Performance evaluation of grid-enabled registration algorithms using bronze-standards

CERN Document Server

Glatard, T; Montagnat, J

2006-01-01

Evaluating registration algorithms is difficult due to the lack of gold standard in most clinical procedures. The bronze standard is a real-data based statistical method providing an alternative registration reference through a computationally intensive image database registration procedure. We propose in this paper an efficient implementation of this method through a grid-interfaced workflow enactor enabling the concurrent processing of hundreds of image registrations in a couple of hours only. The performances of two different grid infrastructures were compared. We computed the accuracy of 4 different rigid registration algorithms on longitudinal MRI images of brain tumors. Results showed an average subvoxel accuracy of 0.4 mm and 0.15 degrees in rotation.

Behavior of the monophosphate tungsten bronzes (PO2)4(WO3)2m (m = 7 and 8) in the course of electrochemical lithium insertion

International Nuclear Information System (INIS)

Martinez-de la Cruz, A.; Longoria Rodriguez, F.E.; Gonzalez, Lucy T.; Torres-Martinez, Leticia M.

2007-01-01

The electrochemical lithium insertion process has been studied in the family of monophosphate tungsten bronzes (PO 2 ) 4 (WO 3 ) 2m , where m = 7 and 8. Structural changes in the pristine oxides were followed as lithium insertion proceeded. Through potentiostatic intermittent technique the different processes which take place in the cathode during the discharge of the cell were analyzed. The nature of the bronzes Li x (PO 2 ) 4 (WO 3 ) 2m formed was determined by in situ X-ray diffraction experiments. These results have allowed establishing a correlation with the reversible/irreversible processes detected during the electrochemical lithium insertion

Evaluation of copper, aluminum bronze, and copper-nickel container material for the Yucca mountain project

International Nuclear Information System (INIS)

Kass, J.

1990-01-01

Copper, 70 percent aluminum bronze, and 70/30 copper-nickel were evaluated as potential waste-packaging materials as part of the Yucca Mountain Project. The proposed waste repository site is under a desert mountain in southern Nevada. The expected temperatures at the container surface are higher than at other sites, about 250C at the beginning of the containment period; they could fall below the boiling point of water during this period, but will be exposed to very little water, probably less than 5 l/a. Initial gamma flux will be 10 4 rad/h, and no significant hydrostatic or lithostatic pressure is expected. Packages will contain PWR or BWR fuel, or processed-glass waste. Three copper alloys are being considered for containers: oxygen-free copper (CDA 102); 7 percent aluminum bronze (CDA 613); and 70/30 copper-nickel (CDA 715). Phase separation due to prolonged thermal exposure could be a problem for the two alloys, causing embrittlement. The reduction of internal oxides present in pure copper by hydrogen could cause mechanical degradation. Corrosion and oxidation rates measured for the three materials in well water with and without gamma irradiation at flux rates about ten times higher than those expected were all quite small. The corrosion/oxidation rates for CDA715 show a marked increase under irradiation, but are still acceptable. In the presence of ammonia and other nitrogen-bearing species stress corrosion cracking (SCC) is a concern. Welded U-bend specimens of all three materials have been tested for up to 10000 h in highly irradiated environments, showing no SCC. There was some alloy segregation in the Al bronze specimens. The investigators believe that corrosion and mechanical properties will not present problems for these materials at this site. Further work is needed in the areas of weld inspection, welding techniques, embrittlement of weld metal, the effects of dropping the containers during emplacement, and stress corrosion cracking. Other materials

Environmental impact of copper mining and metallurgy during the Bronze Age at Kargaly (Orenburg region, Russia

Directory of Open Access Journals (Sweden)

Vicent García, Juan Manuel

2010-12-01

Full Text Available Kargaly (Orenburg, Russia is a copper-producing region in which two main phases of mining activity have taken place: the 4^th-2^nd millennia BC and the 18^th-20^th centuries AD. This article is a comparative study on the impact of those mining episodes in the distribution of the forest resources in the region, aimed to estimate the scale of prehistoric mining and metallurgical works. For that purpose two paleopalinological sequences obtained from natural deposits located in Kargaly are analysed by inferential Statistics and Multivariate Methods. The results are compared both with a regional sampling of recent pollen rain supported by an analytical model of the present day landscape, and with the anthracological data coming from the Late Bronze Age settlement of Gorny 1. Analysis confirm the large scale of the prehistoric mining impact on the forest cover from the beginnings, as well as the strong effect of husbandry once mining works ended. These results allow us to dismiss a climatic change as main explanation for the detected diachronic variability in the palinological record. They also prove the viability of the proposed approach as a means of integrating the paleoenvironmental disciplines in Landscape Archaeology.

Kargaly (región de Orenburgo, Rusia es una región cuprífera explotada entre los milenios IV y II cal BC y los siglos XVIII y XX d.C. El objetivo del artículo es estudiar comparativamente el impacto de estos episodios mineros en la distribución de los recursos forestales de la región, para aproximar la escala de las operaciones minero-metalúrgicas prehistóricas. Para ello se analizan con métodos estadísticos inferenciales y multivariantes dos secuencias paleopalinológicas procedentes de depósitos naturales de la región y se comparan con un muestreo regional de la lluvia polínica reciente apoyado por un modelo analítico del paisaje actual y con los datos antracol

Roman bronze artefacts from Thamusida (Morocco): Chemical and phase analyses

Energy Technology Data Exchange (ETDEWEB)

Gliozzo, E., E-mail: gliozzo@unisi.i [Dipartimento di Scienze della Terra, Universita di Siena, via Laterina 8, 53100 Siena (Italy); Kockelmann, W., E-mail: winfried.kockelmann@stfc.ac.u [Science and Technology Facilities Council, Rutherford Appleton Laboratory, Harwell Science and Innovation Campus, Didcot OX11 0QX (United Kingdom); Bartoli, L., E-mail: bartoli@ifac.cnr.i [Istituto dei Sistemi Complessi, Consiglio nazionale delle Ricerche, Via Madonna del Piano 10, 50019 Sesto Fiorentino (Italy); Tykot, R.H., E-mail: rtykot@usf.ed [Department of Anthropology, University of South Florida, Tampa, FL 33620 (United States)

2011-02-01

Twenty-six objects (1st to the 3rd century AD) found at the archaeological site of Thamusida (Morocco), which is a military settlement between the 1st and the 3rd century AD, have been investigated by means of portable X-ray fluorescence and time of flight-neutron diffraction. The combination of element-sensitive X-ray fluorescence and structure-sensitive neutron diffraction yields, in a totally non-destructive way, the necessary information to discriminate the copper alloy from corrosion and alteration layers. Results allowed dividing the repertory into five groups: (a) unalloyed copper, (b) binary alloys made of Cu and Sn, frequently leaded; (c) unleaded binary alloys made of Cu and Zn; (d) ternary alloys made of Cu, Sn and Zn, both leaded and unleaded; (e) quaternary alloys made of Cu, Sn, Zn and As. The choice of alloy is heterogeneous, mainly depending on availability and costs of raw and/or scrap materials and on technological constraints. Interestingly, the reconstruction obtained for Thamusida could either anticipate the important change in the Roman use of copper alloys generally referred as 'zinc decline', or more likely, indicate that brass never conspicuously entered the local metal-working activities of this military site.

Analyzing Lead Content in Ancient Bronze Coins by Flame Atomic Absorption Spectroscopy: An Archaeometry Laboratory with Nonscience Majors

Science.gov (United States)

Donais, Mary Kate; Whissel, Greg; Dumas, Ashley; Golden, Kathleen

2009-01-01

A unique, interdisciplinary collaboration between chemistry and classics has led to the development of an experiment for nonscience majors. This instrumental analysis experiment was designed for use in an archaeology course to quantify the amount of lead in ancient bronze coins. The coins were corroded beyond visual identification, so provenance…

Charge Density Waves and the Hidden Nesting of Purple Bronze KMo6O17

Science.gov (United States)

Su, Lei; Pereira, Vitor

The layered purple bronze KMo6O17, with its robust triple CDW phase up to high temperatures, became the emblematic example of the ''hidden nesting'' concept. Recent experiments suggest that, on the surface layers, its CDW phase can be stabilized at much higher temperatures, and with a tenfold increase in the electronic gap in comparison with the bulk. Despite such interesting fermiology and properties, the K and Na purple bronzes remain largely unexplored systems, most particularly so at the theoretical level. We introduce the first multi-orbital effective tight-binding model to describe the effect of electron-electron interactions in this system. Upon fixing all the effective hopping parameters in the normal state against an ab-initio band structure, and with only the overall scale of the interactions as sole adjustable parameter, we find that a self-consistent Hartree-Fock solution reproduces extremely well the experimental behavior of the charge density wave (CDW) order parameter in the full range 0 < T < Tc , as well as the precise reciprocal space locations of the partial gap opening and Fermi arc development. The interaction strengths extracted from fitting to the experimental CDW gap are consistent with those derived from an independent Stoner-type analysis This work was supported by the Singapore National Research Foundation under Grant NRF-CRP6-2010-05.

Will the Liberal Arts Survive the Bronze Age of American Academe?

Science.gov (United States)

Kimball, Bruce A.

2015-01-01

Kimball begins this essay by comparing the start of the "golden age" of liberal arts education as the period between about 1950 and 1975 when American higher education's revenue and enrollments of colleges and universities grew enormously. During the subsequent silver age of academe, ending in the Great Recession of 2008-2009,…

Effect of high energy milling time of the aluminum bronze alloy obtained by powder metallurgy with niobium carbide addition

Energy Technology Data Exchange (ETDEWEB)

Dias, Alexandre Nogueira Ottoboni; Silva, Aline da; Rodrigues, Carlos Alberto; Melo, Mirian de Lourdes Noronha Motta; Rodrigues, Geovani; Silva, Gilbert, E-mail: aottoboni@yahoo.com.br [Universidade Federal de Itajuba (UNIFEI), Itajuba, MG (Brazil)

2017-05-15

The aluminum bronze alloy is part of a class of highly reliable materials due to high mechanical strength and corrosion resistance being used in the aerospace and shipbuilding industry. It's machined to produce parts and after its use cycle, it's discarded, but third process is considered expensive and besides not being correct for environment reasons. Thus, reusing this material through the powder metallurgy (PM) route is considered advantageous. The aluminum bronze chips were submitted to high energy ball milling process with 3% of niobium carbide (NbC) addition. The NbC is a metal-ceramic composite with a ductile-brittle behaviour. It was analyzed the morphology of powders by scanning electron microscopy as well as particle size it was determined. X ray diffraction identified the phases and the influence of milling time in the diffractogram patterns. Results indicates that milling time and NbC addition improves the milling efficiency significantly and being possible to obtain nanoparticles. (author)

Physiological characteristics of an aging Olympic athlete

DEFF Research Database (Denmark)

Nybo, Lars; Schmidt, Jakob Friis; Fritzdorf, Stephen

2014-01-01

To investigate the physiological basis of continued world-class performance of a world-class rower who won medals (3 gold and 2 bronze) at five consecutive Olympic Games.......To investigate the physiological basis of continued world-class performance of a world-class rower who won medals (3 gold and 2 bronze) at five consecutive Olympic Games....

3D scanning and printing as conversation tools: an innovative treatment of a vandalized bronze statue, The Thinker by Rodin

NARCIS (Netherlands)

Beentjes, T.; van der Molen, R.; Saunders, D.; Strlic, M.; Korenberg, C.; Luxford, N.; Birkhölzer, K.

2013-01-01

This contribution discusses the innovative treatment of a severely vandalized bronze sculpture, The Thinker by Auguste Rodin, from the Singer Museum in Laren, The Netherlands. Additional aspects of this controversial treatment such as decision making and documentation are also discussed. In 2007 the

QUALITY OF LIFE AT WORK: A STUDY OF WORKERS IN THE METALWORKING INDUSTRY IN THE MIDWEST OF SANTA CATARINA

Directory of Open Access Journals (Sweden)

G. Lunardelli

2017-08-01

Full Text Available This study aimed to evaluate the quality of life of workers in the metalworking industry in the middle west of Santa Catarina. Therefore, we opted for a qualitative approach to know the aspects that guide and characterize female employment in the labor market, and was carried out a survey to know the reality faced by this group. It is important to emphasize the importance of companies adopt different methods and practices to adapt the working environment and conditions provide rights similar to those of men. Thus, the article addressed the inclusion of women in the workplace, treating the historical context of the feminization of the labor market, the gender division and inequality between genders in this sector. Still, women's insertion in the mechanical metal sector in the middle West Santa Catarina region was analyzed, and the preservation of their rights and appreciation while working. Although women have gained greater participation within organizations, they face wage differences, behavioral and quality of life that need to be better studied.

In situ resistance measurements of bronze process Nb-Sn-Cu-Ta multifilamentary composite conductors during reactive diffusion

International Nuclear Information System (INIS)

Tan, K S; Hopkins, S C; Glowacki, B A; Majoros, M; Astill, D

2004-01-01

The conditions under which the Nb 3 Sn intermetallic layer is formed by solid-state reactive diffusion processes in bronze process multifilamentary conductors greatly influence the performance of the conductors. By convention, isothermal heat treatment is used and often causes non-uniformity of A15 layers formed across the wire. Therefore, characterization and optimization of the conductor during the reactive diffusion processes is crucial in order to improve the overall conductor's performance. In this paper, a different characterization approach and perhaps an optimization technique is presented, namely in situ resistance measurement by an alternating current (AC) method. By treating the components of such multifilamentary wires as a set of parallel resistors, the resistances of the components may be combined using the usual rules for resistors in parallel. The results show that the resistivity of the entire wire changes significantly during the reactive diffusion processes. The development of the Nb 3 Sn layer in bronze process Nb-Sn-Cu-Ta multifilamentary wires at different stages of the reactive diffusion processes has been monitored using measured resistivity changes, and correlated with results from DTA, ACS, SEM and EDS

THE ORIGIN OF GRAPEVINE CULTIVATION IN ITALY: THE ARCHAEOBOTANICAL EVIDENCE

Directory of Open Access Journals (Sweden)

S. Marvelli

2013-04-01

Full Text Available Grapevine remains show that this plant has been important for humans since ancient times. This paper presents a synthesis of archaeobotanical studies on grapevine remains (pollen, wood, charcoal, seed/fruit and other botanical remains from Epigravettian to Bronze Age sites. Carpological remains are the most important ones, because they often allow to distinguish cultivated and wild grapevines. Grapevine findings are rare in Mesolithic sites, they increase during Neolithic period and become frequent in Bronze Age. Archaeobotanical data show that during Neolithic and in the Early Bronze Age a good level of knowledge concerning grapevine utilization was already acquired; during Middle and Late Bronze Age the grapevine diffusion increases. Based on archaeobotanical data, the wild grapevine evolution by indigenous people was probably accompanied by an input of allochtonous vines from Mycenaean world, and then from Hellenic world. Therefore, the critical period of grapevine domestication can be placed between Bronze Age and Early Iron Age.

Preliminary Assessment about Genetic Diversity, the Stability of Potential Mutants from Two Varieties of Chrysanthemum morifolium Ramat. (Bronze Doa and Purple Farm) via Gamma Irradiation

International Nuclear Information System (INIS)

Nguyen Tuong Mien; Le Ngoc Trieu; Le Tien Thanh; Pham Van Nhi; Huynh Thi Trung

2013-01-01

The aim of this study was to evidence the efficiency of irradiation by gamma ray from 60 Co source on chrysanthemum artificial seeds, through that select a number of potential mutants from two varieties of Chrysanthemum morifolium Ramat artificial seeds (Bronze and purple chrysanthemum). The experimental result showed that LD 50 for the Bronze Doa variety was 50 Gy and Purple Farm variety was 100 Gy. Irradiated in vitro artificial seeds were transferred into fresh MS medium and placed in the growth room with three replications at each of dose. The completed in vitro plants were transplanted into ex vitro condition in green house. After 30 days in the greenhouse, survival rate of plantlets were and growth in 20 Gy and 40 Gy for Purple chrysanthemum, while the number of survival Bronze chrysanthemum plantlets were reduced gradually toward the increasing of gamma doses. In this study, on farm, through screening 18 phenotypic mutants of both chrysanthemums were recorded and collected including 6 potential mutants that selected for next research based on their phenotypic differences to the originals, their aesthetic and low mosaic. These 6 potential mutants together with their original varieties were micro-propagated to induce the potential mutant lines for estimation on farm of mutant characteristic segregation rates. (author)

Transformation of Neolithic Societies

DEFF Research Database (Denmark)

Iversen, Rune

and prepared the way for the appearance of Bronze Age societies. The great era of megalithic architecture came to an end as the production and exchange of gold, copper and bronze objects became the driving force in the development of Copper and Bronze Age societies. This development also had a great influence...

Study of patina formation on bronze specimens

International Nuclear Information System (INIS)

Oliveira, F.J.R. de; Lago, D.C.B.; Senna, L.F.; Miranda, L.R.M. de; D'Elia, E.

2009-01-01

In this study, bronze samples (94.059% Cu; 0.023% Zn; 0.077% Pb and 5.801% Sn, w/w) were exposed for 8 months to a marine atmosphere (splash zone) at Barra of Tijuca Beach, Rio de Janeiro. X-ray diffraction analysis (XRD) was used to identify the composition of the corrosion products formed on the samples. The electrochemical properties were analyzed using potential and electrochemical impedance measurements. These analyses and measurements were obtained from periodically removed samples, and compared to those exposed to laboratory tests (total and alternating immersion) in 10 -2 mol L -1 NaCl solution. The corrosion potential results, allied to XRD analysis, showed that the chemical nature of the films obtained on the surface of the field test samples was very similar to that obtained in the alternating immersion test. The main products identified were cuprite and atacamite. However, the film formed during the total immersion (TI) test was primarily composed of cuprite with nantokite traces, which was not observed in either the field or in alternating tests. The electrochemical impedance measurements obtained in laboratory and field test samples showed the formation of films with a porous structure. The thermodynamic evaluation was also consistent with the corrosion products formed.

Fragmenting the Chieftain : a practice-based study of Early Iron Age Hallstatt C elite burials in the Low Countries

NARCIS (Netherlands)

Vaart, van der S.A.

2017-01-01

There is a cluster of Early Iron Age (800–500 BC) elite burials in the Low Countries in which bronze vessels, weaponry, horse-gear and wagons were interred as grave goods. Mostly imports from Central Europe, these objects are found brought together in varying configurations in cremation

The Influence of Pseudomonas fluorescens on Corrosion Products of Archaeological Tin-Bronze Analogues

Science.gov (United States)

Ghiara, G.; Grande, C.; Ferrando, S.; Piccardo, P.

2018-01-01

In this study, tin-bronze analogues of archaeological objects were investigated in the presence of an aerobic Pseudomonas fluorescens strain in a solution, containing chlorides, sulfates, carbonates and nitrates according to a previous archaeological characterization. Classical fixation protocols were employed in order to verify the attachment capacity of such bacteria. In addition, classical metallurgical analytical techniques were used to detect the effect of bacteria on the formation of uncommon corrosion products in such an environment. Results indicate quite a good attachment capacity of the bacteria to the metallic surface and the formation of the uncommon corrosion products sulfates and sulfides is probably connected to the bacterial metabolism.

Critical current, electro-mechanical properties and specific heat of bronze Nb{sub 3}Sn conductors

Energy Technology Data Exchange (ETDEWEB)

Uglietti, D.; Seeber, B.; Abacherli, V.; Flukiger, R. [Geneva Univ., Groupe Applique de Physique (GAP) (Switzerland); Wang, X.Y.; Junod, A.; Flukiger, R. [Geneva Univ., Dept. Phys. Mat. Condensee (DPMC) (Switzerland)

2004-07-01

The fabrication process leading to a Nb{sub 3}Sn wire by using the bronze route with 15.4 wt per cent of Sn is described. The critical current density, J{sub c}, is studied as a function of the applied magnetic field, B, up to 25 T; the uniaxial strain, {epsilon}, was measured up to 17. In the second part our device for measuring I{sub c}({epsilon}) is presented. The device is based on the concept of the Walters spring (WASP), which allows to measure long length wires (voltage taps distance up to 50 cm), up to 1000 A and to obtain an absolute measurement of the strain value. It is thus possible to measure the voltage-current relation of technical superconducting wires and tapes down to 0.01 {mu}V/cm, an important requirement for the characterisation in view of applications like NMR high field magnets which require persistent mode operation with high current densities. Finally specific heat measurements on Nb{sub 3}Sn wires prepared at GAP have allowed to determine for the first time the overall distribution of T{sub c} in the filaments. The onset of T{sub c} was observed at 17.2 K, the T{sub c} distribution being centred at 15.9 K. This analysis confirms the reduction of T{sub c} due to the Ti addition and the presence of a distribution of Sn in Nb{sub 3}Sn bronze wires. (authors)

Food offerings, flowers, a bronze bucket and a waggon: a multidisciplinary approach regarding the Hallstatt princely grave from Prague-Letňany, Czech Republic

Czech Academy of Sciences Publication Activity Database

Kozáková, Radka; Kyselý, René; Trefný, M.; Drábková, K.; Kočár, Petr; Frolíková, Drahomíra; Kočárová, R.; Moravcová, Kamila

-, - (2017) ISSN 1866-9557 Institutional support: RVO:67985912 Keywords : grave * meat offerings * pollen * bronze bucket * paint * infrared spectroscopy * xylotomic analysis Subject RIV: AC - Archeology, Anthropology, Ethnology OBOR OECD: Archaeology Impact factor: 1.844, year: 2016

Magnetic susceptibility of the rare earth tungsten oxide bronzes of the defected perovskite-type structure (Rsub(x)WO/sub 3/)

Energy Technology Data Exchange (ETDEWEB)

Gesicki, A; Polaczek, A [Warsaw Univ. (Poland)

1975-01-01

Magnetic susceptibility of rare earth tungsten bronzes Rsub(x)WO/sub 3/ of cubic symmetry was measured in the 80-293 K range with the Gouy method. In disagreement with the data reported by other authors it was stated that the Curie-Weiss law with negative Weiss parameter was fulfilled in each case. Possible coupling mechanisms are briefly discussed.

Mass spectrometric investigation of evaporation of lithium-vanadium bronze

International Nuclear Information System (INIS)

Kudin, L.S.; Pogrebnoj, A.M.

1996-01-01

The composition of ionic and neutral components of vapour above lithium-vanadium bronze Li 0.2 VO 2.6 has been studied. It is ascertained that molecules of LiVO 3 and O 2 and Li + ions (2.2±0.2); Li + ·LiVO 3 (2.4±0.3); Li + ·(LiVO 3 ) 2 (2.4±0.9); Li + ·V 2 O 5 (2.3±0.9); Cs + (2.1±0.3); Cs + ·LiVO 3 (2.6±1.0) are basic components of saturated vapour, the values of ionic work functions in eV are given in parentheses. Sublimation enthalpy of lithium metavanadate Δ S H 0 (LiVO 3 , 298 K)=457±30 kJ/mol and its formation enthalpy Δ f H 0 (LiVO 3 , gas, 298 k)=-704±30 kJ/mol. have been defined. Using law 2 of thermodynamics the enthalpies of ion-molecular reactions have been defined. ion formation enthalpies being calculated on their basis. 18 refs., 3 figs., 3 tabs

Research of Tool Durability in Surface Plastic Deformation Processing by Burnishing of Steel Without Metalworking Fluids

Science.gov (United States)

Grigoriev, S. N.; Bobrovskij, N. M.; Melnikov, P. A.; Bobrovskij, I. N.

2017-05-01

Modern vector of development of machining technologies aimed at the transition to environmentally safe technologies - “green” technologies. The concept of “green technology” includes a set of signs of knowledge intended for practical use (“technology”). One of the ways to improve the quality of production is the use of surface plastic deformation (SPD) processing methods. The advantage of the SPD is a capability to combine effects of finishing and strengthening treatment. The SPD processing can replace operations: fine turning, grinding or polishing. The SPD is a forceful contact impact of indentor on workpiece’s surface in condition of their relative motion. It is difficult to implement the core technology of the SPD (burnishing, roller burnishing, etc.) while maintaining core technological advantages without the use of lubricating and cooling technology (metalworking fluids, MWF). The “green” SPD technology was developed by the authors for dry processing and has not such shortcomings. When processing with SPD without use of MWF requirements for tool’s durability is most significant, especially in the conditions of mass production. It is important to determine the period of durability of tool at the design stage of the technological process with the purpose of wastage preventing. This paper represents the results of durability research of natural and synthetic diamonds (polycrystalline diamond - ASPK) as well as precision of polycrystalline superabrasive tools made of dense boron nitride (DBN) during SPD processing without application of MWF.

Influence of Ta and Ti Doping on the High Field Performance of (Nb, Ta, Ti)3Sn Multifilamentary Wires based on Osprey Bronze with High Tin Content

International Nuclear Information System (INIS)

Abaecherli, V; Uglietti, D; Lezza, P; Seeber, B; Fluekiger, R; Cantoni, M; Buffat, P-A

2006-01-01

Ta and Ti are the most widely used additions for technical Nb 3 Sn multifilamentary superconductors. These elements are known to influence grain growth, grain morphology and chemical composition in the A15 layer, hence the current carrying properties of the wires over a wide magnetic field range. So far only few studies tried to compare systematically Ta and Ti doped and undoped Nb 3 Sn wires in the frame of the same work, down to a nanometric scale. We present an investigation on several multifilamentary (Nb, Ta, Ti) 3 Sn bronze route wires, fabricated at a laboratory scale, with various amounts of additives. The wires consist of fine filaments embedded in a Cu-Sn or Cu-Sn-Ti Osprey bronze with > 15 wt.% Sn and an external Cu stabilization. Microstructural observations are compared with the results of J c and n values measured up to 21 T at 4.2 and 2.2 K, and for longitudinal strains up to 0.5%. Non-Cu J c values up to 300 Amm -2 and n values up to 50 at 17 T and 4.2 K show clearly that wires with Ti addition to the bronze have a better performance with respect to wires with Ti additions to the filaments

Ancient bronze horse muzzles of the Iberian Peninsula

Directory of Open Access Journals (Sweden)

Garcés Estallo, Ignasi

2011-12-01

Full Text Available Horse muzzles and Bronze muzzles are unique equestrian tools that have been referred to in scattered accounts throughout history. Nevertheless, the majority of these objects have received short descriptions and an overall study is still missing. The lack of a comprehensive study hinges on the over looked importance of these items and the superficial manner that have characterized their documentation. Both these reasons have limited observations on chronology and archaeological investigation. The recent identification of new unpublished exemplars among the Museums’ collections in Barcelona and Lleida has encouraged the authors of this paper to start a new study dedicated to these objects. Starting from a catalogue inclusive of all muzzles and muzzles currently known in the Iberian Peninsula, an attempt will be made to propose an accurate description, typological classification and, for some of the items, a revision of the decorative scenes that have marked their place in bronze horse muzzle and muzzle chronology. The formal development and the chronological framework here proposed refer to those of the exemplars found in Greece and in Italy. The broadening of the geographical area will allow reconsideration of those social phenomena that have in the past determined the diffusion of elements in horse tack throughout most of the western Peninsula in the Mediterranean.

Los bozales y las muserolas en bronce para caballo constituyen unos excepcionales complementos ecuestres cuyo conocimiento se encuentra disperso en una extensa bibliografía. De muchos ejemplares apenas se ha publicado una breve descripción y nunca hasta el presente han sido objeto de un estudio monográfico, quizás por el desaliento que produce el desconocimiento de su procedencia en unos casos, o la superficial noticia del contexto de aparición en la mayoría de ellos, hecho que ha limitado las consideraciones cronológicas y de asociación. La identificación de nuevos

Comparison of LIBS and {mu}-XRF measurements on bronze alloys for monitoring plasma effects

Energy Technology Data Exchange (ETDEWEB)

Alberghina, M F; Barraco, R; Brai, M; Schillaci, T; Tranchina, L, E-mail: tschillaci@unipa.it [Dipartimento di Fisica e Tecnologie Relative, Universita di Palermo, Viale delle Scienze Ed. 18, 90128 Palermo (Italy)

2011-01-01

The laser-induced breakdown spectroscopy (LIBS) technique is often used as atomic spectroscopic technique for elemental analysis of materials. However, it presents some drawbacks that make an accurate quantitative analysis difficult. Since the plasma properties, such as spatial inhomogeneity and plume stoichiometry strongly depend on the experimental conditions, the measurements are less reproducible. In order to evaluate the measurement fluctuations, we propose to use the more established micro X-Ray fluorescence ({mu}-XRF) technique for validating LIBS data. In particular, the quantitative data, obtained by varying the laser fluence, the shot numbers and the temporal acquisition parameters, were compared with those obtained by {mu}-XRF on laboratory made samples of binary, ternary and quaternary bronze alloys. For LIBS measurements a mobile double pulse laser instrument equipped with an high resolution Echelle type monochromator coupled to an intensified CCD camera was used. {mu}-XRF analyses were performed with a portable instrument that uses a micro collimated X-Ray beam and it is equipped with an high resolution detector. The LIBS results show a strong dependence both on the instrumental set up and the chemical-physical properties of the sample. With our findings we could identify the most suitable parameters to be used in the investigation of the different bronze alloys. The possibility to carry out a quantitative analysis by using the LIBS technique was checked through the comparison with related {mu}-XRF data. In particular in this paper we identified a set of reliable LIBS parameters for the quantitative analysis of copper, tin and zinc. Further analyses will be necessary to reach this goal also for the minor constituents as lead.

Positron annihilation spectroscopy studies of bronze exposed to sandblasting at different pressure

Science.gov (United States)

Kurdyumov, S.; Siemek, K.; Horodek, P.

2017-11-01

An application of Doppler broadening of annihilation line spectroscopy to samples of beryllium bronze DIN-CuBe2 exposed to sandblasting is presented in performed studies. It is familiar that sandblasting introduces open-volume defects. Samples were sandblasted under different pressure for 1 minute using 110 μm particles of Al2O3. For a non-defected sample the constant value of S-parameter was detected. In the cases of sandblasted samples, S-parameter decreased when the depth enhanced. In our studies the thicknesses of defected zones were determined (it was c.a. 30 μm for a sample blasted under pressure of 1 bar and 110 μm - for 5 bar), and it was also observed that if sandblasting pressure is higher the defected zone is larger.

Domain structures of sodium tungsten bronzes, Na/sub x/WO/sub 3/ (0. 4 < x < 1)

Energy Technology Data Exchange (ETDEWEB)

Atoji, M

1978-01-01

Optical-microscope observations with polarized light have shown that the birefringent, twin-domain structure of sodium tungsten bronzes is exhibited by Na-deficient, epitaxial surface films and hence is not a bulk property as had been suggested elsewhere. The film is translucent, 10/sup -2/ - 10/sup -3/ mm thick or less, and often laminates to a multi-film layer. The domain boundaries are sensitive to lateral stress and, apparently, to minute changes in the substrate structure. These and related properties of the film and the substrate are presented.

Industrial activity, gas emissions and environmental urban management. Operative condition's diagnostic of smelting activities in Tandil, Argentina

International Nuclear Information System (INIS)

Soledad Sosa, Beatriz; Guerrero, Elsa Marcela; Banda Noriega, Roxana

2013-01-01

Amongst urban environmental problems, those associated to industry are of particular interest in environmental management. Tandil, a city in Argentina, owes its economic and urban growth to metalworking activity, especially to smelting. Despite the crisis in the sector, activity continues to be the axis of local economic and urban growth. The present research characterizes, in production, operative and environmental terms, local smelting industries and assesses operative conditions of gas emissions management during 2010. There were analyzed 25 industries over 30. The sample was representative of five productive processes: aluminum (Al), aluminum/iron (Al Fe), aluminum/bronze (Al Cu+Sn), aluminum/iron/bronze (Al Fe Cu+Sn), and iron (Fe). The variables analyzed were: primary fusion mater, oven used and industry size. To obtain production data we applied structured interviews, and for industry sizes we used surveys. It was possible to describe the productive prospect of the sector at a local level: for most industries the destination of their production is automotive sector. Taking into account the relation between the size and the type of industry, the aluminum smelting companies are small. Regarding iron industries, all three company sizes are present in the sample and exists a medium size industry that occupies between 51 and 230 employees. The operative conditions and their compliance with current legislation regarding control of gas emissions require to identify monitoring indicators for the melting stage that allow knowing precisely the resulting contaminants and their environmental effects.

Hisar in Leskovac at the end of the early iron age

Directory of Open Access Journals (Sweden)

Stojić Milorad

2007-01-01

Full Text Available All parts of the site Hisar in Leskovac provided material from Iron Age III according to the division by M. Garašanin (mainly from the 5th century BC. Four or perhaps five habitations from this period, in relation to the excavated surface (app. 15 000 m2, indicate a settlement with a larger number of dwelling places. Its architecture - wattle and daub huts and dug outs - has no particular characteristics, and is similar to habitations from previous periods in the Morava valley. Archaeological material from Iron Age III includes pottery made on the wheel of Greek style, hand made pottery and decorative silver and bronze objects.

Genética de coffea VI: independência dos fatores xc xc (xanthocarpa e br br (bronze em coffea arabica L.

Directory of Open Access Journals (Sweden)

C. A. Krug

1942-01-01

Full Text Available Em artigos anteriores (1, 2 os autores demonstraram que a cor amarela dos frutos e a coloração bronzeada das folhas novas são, em Coffea arabica L, controladas, cada uma, por um único par de fatores genéticos (respectivamente xc xc e Br Br. Os híbridos F1 no primeiro caso com plantas de frutos vermelhos, e no segundo com plantas de folhas novas verdes, demonstraram tratar-se de casos em que há dominância incompleta nesta geração, os frutos híbridos possuindo uma coloração vermelho clara e as folhas novas se apresentando com uma tonalidade bronze clara. Como algumas das hibridações realizadas envolviam, ao mesmo tempo, os dois caracteres em questão, apresentou-se a oportunidade para constatar se havia ou não independência entre os dois pares de fatores que controlam estes caracteres. Neste artigo apresentam-se os resultados das observações realizadas, tanto em diversas populações de F2 como também em dois back-crosses. Os dados confirmam plenamente a hipótese estabelecida, isto é, da independência entre os dois pares de fatores em questão (xc xc e Br Br. Este fato era esperado à vista do número relativamente elevado de cromosômios nas variedades cruzadas (2n = 44.In two previous publications (1,2 the authors demonstrated that in Coffea arabica L. yellow fruit color and bronze color of young leaves are each controled by one pair of genes (respectively xc xc and Br Br. The F1 hybrids, in the first instance between plants with yellow and red fruits and in the second instance between plants with bronze and green colored young leaves, showed incomplete dominance of both characters, the F1 fruits being of a light red color and the F1 young leaves of a light bronze one. As some of the crosses involved both pairs of genes, it was possible to find out wether they are linked or independent. In the present article the authors are publishing the results obtained with several F2 populations and also with 2 types of back crosses

Particle size and kind of mica in synthesis of nontoxic bronze and gold pearlescent pigments based on nanoencapsulated hematite

Directory of Open Access Journals (Sweden)

Maryam Hosseini-Zori

2015-12-01

Full Text Available Nano-encapsulated iron oxide in Zirconium oxide-coated mica pigments are thermally stable,innocuous to human health, non-combustible, and they do not conduct electricity. They could beapplied in several industries such as thermoplastics, cosmetics, food packaging, children toys, paints,automobiles coating, security purposes, and banknotes. Nowadays, they are highly desirable inceramic decoration. In the present study, intensively dark gold to bronze colored mica clay pigments,which were based on mica flakes covered with a layer of nano-iron oxide-Zirconium oxide particles,were prepared by homogeneous precipitation of iron nitrate and Zirconium chloride ammonia in thepresence of mica flakes in two kinds of ore clay-based phlogopite and muscovite minerals. The finalcolor was obtained by thermal annealing of precipitates at a temperature of 800◦C. The pigments werecharacterized by X-Ray Diffraction, Particle size analysis, Scanning electron microscopy,Transmission electron microscopy, X-Ray fluorescence, and Simultaneous thermal analysis. Resultsindicate that nano-encapsulated iron oxide in zirconia particles have been formed on mica flakes andkinds of clay-mica can be related to obtained shade from dark gold to bronze pearl. Higher particlesize of mica flakes about phlogopite type of mica introduced pearl effects with higher L* changes indifferent angles. Muscovite performed higher hue and better pearl effect than phlogopite.

Characterizing a Middle Bronze palatial wine cellar from Tel Kabri, Israel.

Directory of Open Access Journals (Sweden)

Andrew J Koh

Full Text Available Scholars have for generations recognized the importance of wine production, distribution, and consumption in relation to second millennium BC palatial complexes in the Mediterranean and Near East. However, direct archaeological evidence has rarely been offered, despite the prominence of ancient viticulture in administrative clay tablets, visual media, and various forms of documentation. Tartaric and syringic acids, along with evidence for resination, have been identified in ancient ceramics, but until now the archaeological contexts behind these sporadic discoveries had been uneven and vague, precluding definitive conclusions about the nature of ancient viticulture. The situation has now changed. During the 2013 excavation season of the Kabri Archaeological Project, a rare opportunity materialized when forty large storage vessels were found in situ in an enclosed room located to the west of the central courtyard within the Middle Bronze Age Canaanite palace. A comprehensive program of organic residue analysis has now revealed that all of the relatively uniform jars contain evidence for wine. Furthermore, the enclosed context inherent to a singular intact wine cellar presented an unprecedented opportunity for a scientifically intensive study, allowing for the detection of subtle differences in the ingredients or additives within similar wine jars of apparently the same vintage. Additives seem to have included honey, storax resin, terebinth resin, cedar oil, cyperus, juniper, and perhaps even mint, myrtle, or cinnamon, all or most of which are attested in the 18th century BC Mari texts from Mesopotamia and the 15th century BC Ebers Papyrus from Egypt. These additives suggest a sophisticated understanding of the botanical landscape and the pharmacopeic skills necessary to produce a complex beverage that balanced preservation, palatability, and psychoactivity. This new study has resulted in insights unachievable in the past, which contribute to a

Characterizing a Middle Bronze palatial wine cellar from Tel Kabri, Israel.

Science.gov (United States)

Koh, Andrew J; Yasur-Landau, Assaf; Cline, Eric H

2014-01-01

Scholars have for generations recognized the importance of wine production, distribution, and consumption in relation to second millennium BC palatial complexes in the Mediterranean and Near East. However, direct archaeological evidence has rarely been offered, despite the prominence of ancient viticulture in administrative clay tablets, visual media, and various forms of documentation. Tartaric and syringic acids, along with evidence for resination, have been identified in ancient ceramics, but until now the archaeological contexts behind these sporadic discoveries had been uneven and vague, precluding definitive conclusions about the nature of ancient viticulture. The situation has now changed. During the 2013 excavation season of the Kabri Archaeological Project, a rare opportunity materialized when forty large storage vessels were found in situ in an enclosed room located to the west of the central courtyard within the Middle Bronze Age Canaanite palace. A comprehensive program of organic residue analysis has now revealed that all of the relatively uniform jars contain evidence for wine. Furthermore, the enclosed context inherent to a singular intact wine cellar presented an unprecedented opportunity for a scientifically intensive study, allowing for the detection of subtle differences in the ingredients or additives within similar wine jars of apparently the same vintage. Additives seem to have included honey, storax resin, terebinth resin, cedar oil, cyperus, juniper, and perhaps even mint, myrtle, or cinnamon, all or most of which are attested in the 18th century BC Mari texts from Mesopotamia and the 15th century BC Ebers Papyrus from Egypt. These additives suggest a sophisticated understanding of the botanical landscape and the pharmacopeic skills necessary to produce a complex beverage that balanced preservation, palatability, and psychoactivity. This new study has resulted in insights unachievable in the past, which contribute to a greater understanding

Stable carbon and oxygen isotope ratios of malachite from the patinas of ancient bronze objects

International Nuclear Information System (INIS)

Smith, A.W.

1978-01-01

13 C/ 12 C and 18 O/ 16 O ratios have been measured for 62 samples of the mineral malachite, taken from the patinas of ancient bronze objects (from Britain, Italy, Libya and China), in order to investigate any possible relationship which may exist between the isotope ratios and the burial conditions of the objects. The results indicate that the isotope ratios are controlled by complex factors related to the climate, vegetation and soil type at the burial site. It is suggested that the technique might be used, given favourable circumstances, in the characterization of patinas and as a possible aid in the detection of synthetic patination. (author)

Isotopic Evidence for Early Trade in Animals between Old Kingdom Egypt and Canaan.

Science.gov (United States)

Arnold, Elizabeth R; Hartman, Gideon; Greenfield, Haskel J; Shai, Itzhaq; Babcock, Lindsay E; Maeir, Aren M

2016-01-01

Isotope data from a sacrificial ass and several ovicaprines (sheep/goat) from Early Bronze Age household deposits at Tell es-Safi/Gath, Israel provide direct evidence for the movement of domestic draught/draft and husbandry animals between Old Kingdom Egypt (during the time of the Pyramids) and Early Bronze Age III Canaan (ca. 2900-2500 BCE). Vacillating, bi-directional connections between Egypt and Canaan are known throughout the Early Bronze Age, but here we provide the first concrete evidence of early trade in animals from Egypt to Canaan.

Isotopic Evidence for Early Trade in Animals between Old Kingdom Egypt and Canaan.

Directory of Open Access Journals (Sweden)

Elizabeth R Arnold

Full Text Available Isotope data from a sacrificial ass and several ovicaprines (sheep/goat from Early Bronze Age household deposits at Tell es-Safi/Gath, Israel provide direct evidence for the movement of domestic draught/draft and husbandry animals between Old Kingdom Egypt (during the time of the Pyramids and Early Bronze Age III Canaan (ca. 2900-2500 BCE. Vacillating, bi-directional connections between Egypt and Canaan are known throughout the Early Bronze Age, but here we provide the first concrete evidence of early trade in animals from Egypt to Canaan.

Isotopic Evidence for Early Trade in Animals between Old Kingdom Egypt and Canaan

Science.gov (United States)

Greenfield, Haskel J.; Shai, Itzhaq; Babcock, Lindsay E.; Maeir, Aren M.

2016-01-01

Isotope data from a sacrificial ass and several ovicaprines (sheep/goat) from Early Bronze Age household deposits at Tell es-Safi/Gath, Israel provide direct evidence for the movement of domestic draught/draft and husbandry animals between Old Kingdom Egypt (during the time of the Pyramids) and Early Bronze Age III Canaan (ca. 2900–2500 BCE). Vacillating, bi-directional connections between Egypt and Canaan are known throughout the Early Bronze Age, but here we provide the first concrete evidence of early trade in animals from Egypt to Canaan. PMID:27322197

Cooperation and Competition: The Comparative Assessment of Tribal Dynamics in the Marginal Landscapes of the Wadi el-Hasa, in west-central Jordan in the Early Bronze and Iron ages

Directory of Open Access Journals (Sweden)

Bulent Arikan

2011-12-01

Full Text Available The issue of emergent social complexity has long been debated in the anthropological literature. In the eastern Mediterranean context, the archaeological discussions of social complexity focused largely on societies that showed centralized administration, hierarchic social formations, and large urban centers in temperate parts of the region. For the marginal landscapes in the eastern Mediterranean, such as semi-desert regions, scholars have long denied social complexity on the basis of lack of attributes listed in traditional frameworks of complexity. Recently however, alternate models of complexity have been developed for tribal societies following heterarchy and corporate mode of complexity. In these models, the concepts of group fusion (i.e., cooperation and fission (i.e., competition have significant roles and they need to be examined in more detail, especially about how we can identify these group dynamics in the archaeological record, specifically in the settlement systems. This article focuses on the Early Bronze I-III (ca. 3,500-2,400 BC and the Iron Age (ca. 1,200-500 BC of the Wadi el-Hasa, in west-central Jordan, for the evolution of settlement systems as a result of tribal cooperation/competition strategies and the emergence of long-distance trade, which allowed tribes not only to thrive economically but also gain political significance in a marginal landscape in the southern Levant. The use of relatively new analytical methods in archaeology, such as the geographical information systems, for assessing temporal changes in spatial distribution of sites, identifying trade routes, determining the impacts of long-distance trade and other socio-political events in the region on the settlement systems of the Hasa has been discussed.

Effects of Mo-doping on microstructure and near-infrared shielding performance of hydrothermally prepared tungsten bronzes

Energy Technology Data Exchange (ETDEWEB)

Wang, Qingjuan; Li, Can; Xu, Wenai; Zhao, Xiaolin; Zhu, Jingxin [Laboratory of Green Energy Materials and Storage Systems, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024 (China); Jiang, Haiwei, E-mail: tyjmx@163.com [Laboratory of Green Energy Materials and Storage Systems, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024 (China); Kang, Litao, E-mail: kangltxy@163.com [Laboratory of Green Energy Materials and Storage Systems, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024 (China); State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences (China); Zhao, Zhe [School of Materials Science & Engineering, Shanghai Institute of Technology, Shanghai 201418 (China)

2017-03-31

Highlights: • Mo-doped tungsten bronzes were hydrothermally synthesized at 80 °C. • Samples transformed from hexagonal to monoclinic structure with Mo-content increase. • 1.5% Mo-doped samples show the best near-infrared shielding performance. • High Mo-doping weakens localized surface plasmon resonance (LSPR) absorption and thus NIR shielding performance. • Small polaron absorption seems to be less affected by Mo-doping. - Abstract: Both Mo and W belong to VIB-sub-group, and possess similar ionic radii, electronegativity and oxide lattice configuration. Herein, Mo-doped (0–80 at.%) tungsten bronzes, M{sub x}WO{sub 3}, were hydrothermally prepared to systematically explore the influence of Mo-doping on their micro-structure and optical performance. The products adopted a hexagonal structure within 6 at.% Mo-doping, and transformed into a monoclinic phase with higher Mo-doping content. Further tests suggested that 1.5 at.% Mo-doping is beneficial for the formation of pure hexagonal phase and uniform nano-rod morphology. Optical measures showed that all samples exhibited high and comparable visible transmittance (70–80%), but a very different near infrared (NIR) shielding ability. The sample doped with 1.5 at.% Mo demonstrated the best NIR shielding ability with a transmittance minimum of 20% at 1300 nm. Further increase of Mo-doping dosage remarkably deteriorated NIR shielding ability by depressing the absorption of localized surface plasmon resonance (LSPR). However, the optical absorption from small-polaron was less influenced by the introduction of Mo. As a result, Mo-doping caused an evident blue shift of the infrared absorption peaks from 1350 to 750 nm.

FENIX experimental results of large-scale CICC made of bronze-processed Nb3Sn strands

International Nuclear Information System (INIS)

Shen, S.S.; Felker, B.; Moller, J.M.; Parker, J.M.; Isono, T.; Yasukawa, Y.; Hosono, F.; Nishi, M.

1994-01-01

The Fusion ENgineering International eXperiments (FENIX) Test Facility recently has successfully complete the testing of a pair of Nb 3 rSn cable-in-conduit conductors developed by the Japan Atomic Energy Research Institute. These conductors, made of bronze-processed strands, were designed to operate stably with 40-kA transport current at a magnetic field of 13 T. In addition to the measurements of major design parameters such as current-sharing temperature, FENIX provided several experiments specifically designed to provide results urgently needed by magnet designers. Performed experiments include measurements of ramp-rate limit, current-distribution, stability, and joint performance. This paper presents the design and results of these special experiments

The examination, analysis and conservation of a bronze Egyptian Horus statuette

Energy Technology Data Exchange (ETDEWEB)

Smith, A. [Conservation Department, Ditsong: National Museum of Cultural History, PO Box 28088, Sunnyside, Pretoria 0132 (South Africa); Botha, H. [South African Institute for Objects Conservation, PO Box 122, Joubertina 6410 (South Africa); Beer, F.C. de, E-mail: frikkie.debeer@necsa.co.za [Radiation Science, Necsa, PO Box 582, Pretoria 0001 (South Africa); Ferg, E. [Department of Chemistry, Nelson Mandela Metropolitan University, PO Box 77000, Port Elizabeth 6031 (South Africa)

2011-09-21

The production techniques, corrosive deterioration, conservation and questions regarding authenticity of a small Egyptian bronze statuette of the Child Horus (in the collection of the Ditsong: National Museum of Cultural History in Pretoria) was scientifically examined and analysed. The statuette dates to Egypt's 12th Dynasty. When the statuette was damaged, it was considered the appropriate time to obtain valuable information about its history and background through scientific research. Neutron tomography (NT), a relatively new non-destructive technique (NDT) to the South African R and D community to study museum objects, was applied to perform this research. The results from NT were supported by additional tests done through XRF and XRD analyses of samples taken from the damaged statuette. Results revealed that the lost-wax method was used in the manufacturing process. The extent of the restoration and materials used can be verified and as a result the deterioration of the object can now be monitored. This paper describes in detail the analytical techniques used in the study and how it contributed to the conservation of the statuette and its authenticity.

The Strategy Development of SMEs Metal

Directory of Open Access Journals (Sweden)

Diah Setyorini Gunawan

2017-03-01

Full Text Available This research aimed to identify the profile of SMEs metal and to analyze the predictors that differentiate the performance achievement of metalworkers in Pasir Wetan Village, Karanglewas Sub-District, Banyumas Regency using primary data obtained from direct interviews with metalworkers in Pasir Wetan Village, Karanglewas Sub-District, Banyumas Regency. Primary data included the data of net income rate, the amount of labor used, the amount of bank credit received, business duration, education level, and the amount of production. The data were analyzed using descriptive analysis and discriminant analysis. The analysis results indicated that the increase in the amount of production and the amount of labor used were the predictors that differentiate the revenue achievement between superior metalworkers group and non-superior metalworkers group. In addition, the amount of production was the best predictor to differentiate the revenue achievement between superior metalworkers group and non-superiors metalworker group.

EXPERIMENTAL MONTAGE USED TO STUDY THE VIBRATION OF THE DRILL TOOL IN THE PROCESS OF MANUFACTURING THE BRONZE MATERIALS

Directory of Open Access Journals (Sweden)

Cosmin-Mihai MIRIŢOIU

2013-05-01

Full Text Available In this paper we present the experimental setup used to study the vibration of the drill tool, during the drilling of the bronze products. In this paper the vibrations are analyzed during the drilling on the universal lathe machines. This time, the tool is fixed in the movable boring head and will make a translation movement with constant feeding, and the workpiece spins around its axis of symmetry and it is fixed in the spindle head stock of the universal lathe machine

Lead-free, bronze-based surface layers for wear resistance in axial piston hydraulic pumps

Energy Technology Data Exchange (ETDEWEB)

Vetterick, Gregory Alan [Iowa State Univ., Ames, IA (United States)

2010-01-01

Concerns regarding the safety of lead have provided sufficient motivation to develop substitute materials for the surface layer on a thrust bearing type component known as a valve plate in axial piston hydraulic pumps that consists of 10% tin, 10% lead, and remainder cooper (in wt. %). A recently developed replacement material, a Cu-10Sn-3Bi (wt.%) P/M bronze, was found to be unsuitable as valve plate surface layer, requiring the development of a new alloy. A comparison of the Cu-1-Sn-10Pb and Cu-10Sn-3Bi powder metal valve plates showed that the differences in wear behavior between the two alloys arose due to the soft phase bismuth in the alloy that is known to cause both solid and liquid metal embrittlement of copper alloys.

The Stone Age Plague and Its Persistence in Eurasia.

Science.gov (United States)

Andrades Valtueña, Aida; Mittnik, Alissa; Key, Felix M; Haak, Wolfgang; Allmäe, Raili; Belinskij, Andrej; Daubaras, Mantas; Feldman, Michal; Jankauskas, Rimantas; Janković, Ivor; Massy, Ken; Novak, Mario; Pfrengle, Saskia; Reinhold, Sabine; Šlaus, Mario; Spyrou, Maria A; Szécsényi-Nagy, Anna; Tõrv, Mari; Hansen, Svend; Bos, Kirsten I; Stockhammer, Philipp W; Herbig, Alexander; Krause, Johannes

2017-12-04

Yersinia pestis, the etiologic agent of plague, is a bacterium associated with wild rodents and their fleas. Historically it was responsible for three pandemics: the Plague of Justinian in the 6 th century AD, which persisted until the 8 th century [1]; the renowned Black Death of the 14 th century [2, 3], with recurrent outbreaks until the 18 th century [4]; and the most recent 19 th century pandemic, in which Y. pestis spread worldwide [5] and became endemic in several regions [6]. The discovery of molecular signatures of Y. pestis in prehistoric Eurasian individuals and two genomes from Southern Siberia suggest that Y. pestis caused some form of disease in humans prior to the first historically documented pandemic [7]. Here, we present six new European Y. pestis genomes spanning the Late Neolithic to the Bronze Age (LNBA; 4,800 to 3,700 calibrated years before present). This time period is characterized by major transformative cultural and social changes that led to cross-European networks of contact and exchange [8, 9]. We show that all known LNBA strains form a single putatively extinct clade in the Y. pestis phylogeny. Interpreting our data within the context of recent ancient human genomic evidence that suggests an increase in human mobility during the LNBA, we propose a possible scenario for the early spread of Y. pestis: the pathogen may have entered Europe from Central Eurasia following an expansion of people from the steppe, persisted within Europe until the mid-Bronze Age, and moved back toward Central Eurasia in parallel with human populations. Copyright © 2017 Elsevier Ltd. All rights reserved.

Spells of History: Childe's Contribution to the European Identity Discourse

Directory of Open Access Journals (Sweden)

Herdis Hølleland

2010-05-01

Full Text Available It is now ten years since the Council of Europe's grand art exhibition 'Gods and Heroes of the Bronze Age – Europe at the Time of Ulysses' toured Europe as a means to 'increase the awareness of the value and the significance of the archaeological heritage' of Europe (AH 2008. Presenting the 'first golden age' of Europe, the Bronze Age exhibition was one of the first steps towards a more defined European cultural politics. The campaign represented something new in European politics, but the idea of the Bronze Age as a golden age in European history is not new. This article draws attention to the archaeological heritage which enabled such an idea to be put forward: Childean prehistory.

Effect of structural packing on the luminescence properties in tungsten bronze compounds M{sub 2}KNb{sub 5}O{sub 15} (M=Ca, Sr, Ba)

Energy Technology Data Exchange (ETDEWEB)

Yin Xin; Shi Liu [State Key Laboratory of High Performance Ceramics and Superfine Microstructures and CAS Key Laboratory of Materials for Energy Conversion, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050 (China); Wei Ang, E-mail: iamawei@njupt.edu.cn [Key Laboratory for Organic Electronics and Information Displays, 9 Wenyuan Road, Nanjing 210046 (China); Wan Dongyun; Wang Yaoming [State Key Laboratory of High Performance Ceramics and Superfine Microstructures and CAS Key Laboratory of Materials for Energy Conversion, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050 (China); Huang Fuqiang, E-mail: huangfq@mail.sic.ac.cn [State Key Laboratory of High Performance Ceramics and Superfine Microstructures and CAS Key Laboratory of Materials for Energy Conversion, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050 (China); College of Chemistry and Molecular Engineering, Peking University, Beijing 100871 (China)

2012-08-15

Tungsten bronze compounds M{sub 2}KNb{sub 5}O{sub 15} (M=Ca, Sr, Ba) were successfully synthesized, and the luminescence properties were investigated. Among the three compounds, Ca{sub 2}KNb{sub 5}O{sub 15} showed an obviously broad band of host luminescence at 460 nm with exciting at 269 nm. By doping Eu{sup 3+} into the M sites, Ca{sub 2}KNb{sub 5}O{sub 15}:Eu{sup 3+} displayed strong red emission from Eu{sup 3+} ions characteristic transitions, nearly four times higher than Sr{sub 2}KNb{sub 5}O{sub 15}:Eu{sup 3+} and seven times higher than Ba{sub 2}KNb{sub 5}O{sub 15}:Eu{sup 3+}. Crystal packing factor (PF) was introduced to account for this luminescence difference, lower PF being correlated to higher luminescence intensity for perovskite-related structure. Both the as-prepared compounds and the literature examples were proved to fit this correlation. This can be explained through the influence of the structural packing on the environment distortion and crystal field splitting of the doping site. - Graphical abstract: Tungsten bronze compounds M{sub 2}KNb{sub 5}O{sub 15} (M=Ca, Sr, Ba) show the dependence of luminescence properties on structural packing, among which Ca{sub 2}KNb{sub 5}O{sub 15} has the superior luminescence. Highlights: Black-Right-Pointing-Pointer Tungsten bronze compounds were synthesized by solid state reaction. Black-Right-Pointing-Pointer Ca{sub 2}KNb{sub 5}O{sub 15} displayed remarkably blue host luminescence. Black-Right-Pointing-Pointer Ca{sub 2}KNb{sub 5}O{sub 15}:Eu{sup 3+} showed more intense red emission than M{sub 2}KNb{sub 5}O{sub 15}:Eu{sup 3+} (M=Sr, Ba). Black-Right-Pointing-Pointer The relationship between crystal packing factor and luminescence was obtained.

CONTRIBUTIONS TO THE STUDY OF THE VIBRATIONS FREQUENCY OF THE DRILL TOOL IN THE PROCESS OF MANUFACTURING THE BRONZE MATERIALS

Directory of Open Access Journals (Sweden)

Cosmin-Mihai MIRIŢOIU

2013-05-01

Full Text Available In this paper we present the experimental testings used to study the vibration of the drill tool, during the drilling of the bronze products. We have used the experimental setup presented in Miriţoiu (2013[1]. In this paper the vibrations are analyzed during the drilling on the universal lathe machines. The main purpose of to find a correlation between the cutting speed and the frequency of the vibration by using the experimental results and the regression analysis

Corrosion evaluation of multi-pass welded nickel–aluminum bronze alloy in 3.5% sodium chloride solution: A restorative application of gas tungsten arc welding process

International Nuclear Information System (INIS)

Sabbaghzadeh, Behnam; Parvizi, Reza; Davoodi, Ali; Moayed, Mohammad Hadi

2014-01-01

Highlights: • Corrosion of GTA welded nickel–aluminum bronze (C95800) was studied. • Drastic microstructural changes occurred during the welding operations. • The β′ and α phases acts as anode and cathode, correspondingly, in weld region. • A few nanoamperes couple current was measured in ZRA test as galvanic corrosion. • Corrosion resistance of weld parts could not be weakened in marine environments. - Abstract: In this research, the corrosion behavior of a gas tungsten arc welded nickel–aluminum bronze (NAB) alloy is investigated by DC and AC electrochemical techniques in 3.5% sodium chloride solution. Regarding the electrochemical impedance spectroscopy and potentiodynamic results, uniform corrosion resistance of instantly immersed weld and base samples are almost analogous and increased (more in weld region) during the immersion times. Moreover, zero resistant ammeter results demonstrated that the few nanoampere galvanic currents are attributed to microstructural and morphological differences between these two regions. Therefore, the welding procedure could not deteriorate the general corrosion resistance of the restored damaged NAB parts operating in marine environments

Depoty kovových artefaktů doby bronzové v Čechách

Czech Academy of Sciences Publication Activity Database

Jiráň, Luboš

2010-01-01

Roč. 11, - (2010), s. 51-55 ISSN 1213-1628 Institutional research plan: CEZ:AV0Z80020508 Keywords : Early Bronze Age * Urnfield culture * bronze deposits Subject RIV: AC - Archeology, Anthropology, Ethnology

Electric and magnetic properties of oxidic titanium bronzes of rare earths Lnsub(2/3+x)TiOsub(3+-y) with perovskite structure

International Nuclear Information System (INIS)

Bazuev, G.V.; Makarova, O.V.; Shvejkin, G.P.

1983-01-01

A study was made on electric and magnetic properties of oxidic titanium bronzes of rare earths and their dependence on rare earth nature and the degree of rare earth sublattice filling was followed. Data on Lnsub(2/3)TiOsub(3-y) (Ln-Ce, Nd) anion-deficient perovskites are given as well. Investigated Cesub(2/3)TiOsub(2.985) and Ndsub(2/3)TiOsub(2.875) phases as well as defectless with respect to oxygen Lnsub(2/3)TiOsub(3) phases have rhombic structure of perovskite type with ordered position of Ln 3 + cations and vacancies. Specific electric resistance and thermoelectromotive force factor were determined in vacuum at 290-1173 K for samples in the form of parallelepiped of 3x5x25 mm 3 size. Magnetic susceptibility chi was determined at 77-300 K by Faraday method using a device based on magnetic balancewith electromagnetic compensation. Relative error during chi measuring didn't exceed +-2%. Collectivized behaviour of d-electrons of Ti 3 + cations in oxidic titanium bronzes of rare earths: Lnsub(2/3+x)TiOsub(3+-y) (Ln-La, Ce, Nd; 0 < x < 1/3), conditioned by formation of narrow, partly filled π*-zone, was established on the basis of measuring specific electric resistance and magnetic susceptibility

Charge-density-wave partial gap opening in quasi-2D KMo 6O 17 purple bronze studied by angle resolved photoemission spectroscopy

Science.gov (United States)

Valbuena, M. A.; Avila, J.; Pantin, V.; Drouard, S.; Guyot, H.; Asensio, M. C.

2006-05-01

Low dimensional (LD) metallic oxides have been a subject of continuous interest in the last two decades, mainly due to the electronic instabilities that they present at low temperatures. In particular, charge density waves (CDW) instabilities associated with a strong electron-phonon interaction have been found in Molybdenum metallic oxides such as KMo 6O 17 purple bronze. We report an angle resolved photoemission (ARPES) study from room temperature (RT) to T ˜40 K well below the Peierls transition temperature for this material, with CDW transition temperature TCDW ˜120 K. We have focused on photoemission spectra along ΓM high symmetry direction as well as photoemission measurements were taken as a function of temperature at one representative kF point in the Brillouin zone in order to look for the characteristic gap opening after the phase transition. We found out a pseudogap opening and a decrease in the density of states near the Fermi energy, EF, consistent with the partial removal of the nested portions of the Fermi surface (FS) at temperature below the CDW transition. In order to elucidate possible Fermi liquid (FL) or non-Fermi liquid (NFL) behaviour we have compared the ARPES data with that one reported on quasi-1D K 0.3MoO 3 blue bronze.

Effect of phase morphologies on the mechanical properties of babbitt-bronze composite interfaces

Science.gov (United States)

Liaw, P. K.; Gungor, M. N.; Logsdon, W. A.; Ijiri, Y.; Taszarek, B. J.; Frohlich, S.

1990-02-01

Interfaces of two different babbitt-bronze composites were tested ultrasonically and then were fractured using the Chalmers test method. The primary distinction between the two composites was in the copper content. Use of less copper in the babbitt resulted in interfaces with higher strength, lower ductility, less cracking, and less unbonded area. The differences appeared to stem from the structure of the intermetallic compounds found at the interface, namely, the Cu3Sn and the Cu6Sn5 layers. The low-copper composite failed within a thick, dendrite-like Cu6Sn5 layer, while the high-copper one separated at the interface between a smooth Cu6Sn5 layer and the babbitt metal. The rough interface morphology seemed responsible for the low-copper composite’s increased strength. The correlation between mechanical and ultrasonic properties was poor for the low-copper composite but excellent for the high-copper one. These results suggest that interface morphology can significantly affect mechanical as well as ultrasonic properties.

Computed tomography of a medium size Roman bronze statue of Cupid

Science.gov (United States)

Bettuzzi, M.; Casali, F.; Morigi, M. P.; Brancaccio, R.; Carson, D.; Chiari, G.; Maish, J.

2015-03-01

Diagnostics based on X-ray computed tomography (CT) are becoming increasingly important, not only in the medical field but in industry and cultural heritage. CT devices typical for medical applications, however, can seldom be used on art objects because both they are not easily transportable and they often present high X-ray absorption. It is therefore necessary to make use of portable instrumentation and/or to develop tomographic systems optimized to the characteristics of the objects under examination. This work describes the computed tomography of a first century A.D. Roman bronze statue of Cupid (96.AB.53) in the collection of the J. Paul Getty Museum, within the collaborative framework between the Getty Conservation Institute and the Department of Physics and Astronomy (DIFA) of the University of Bologna (Italy). The tomography performed at the Getty facilities employed a 450 kV X-ray tube and a detection system developed at DIFA. The study highlighted the casting and construction techniques used by Roman foundry workers and provided information on the status of conservation of the statue. A 3D virtual reconstruction allowed the user to define different cross-sections enabling the study of the internal features.

Fabricating Superior NiAl Bronze Components through Wire Arc Additive Manufacturing

Directory of Open Access Journals (Sweden)

Donghong Ding

2016-08-01

Full Text Available Cast nickel aluminum bronze (NAB alloy is widely used for large engineering components in marine applications due to its excellent mechanical properties and corrosion resistance. Casting porosity, as well as coarse microstructure, however, are accompanied by a decrease in mechanical properties of cast NAB components. Although heat treatment, friction stir processing, and fusion welding were implemented to eliminate porosity, improve mechanical properties, and refine the microstructure of as-cast metal, their applications are limited to either surface modification or component repair. Instead of traditional casting techniques, this study focuses on developing NAB components using recently expanded wire arc additive manufacturing (WAAM. Consumable welding wire is melted and deposited layer-by-layer on substrates producing near-net shaped NAB components. Additively-manufactured NAB components without post-processing are fully dense, and exhibit fine microstructure, as well as comparable mechanical properties, to as-cast NAB alloy. The effects of heat input from the welding process and post-weld-heat-treatment (PWHT are shown to give uniform NAB alloys with superior mechanical properties revealing potential marine applications of the WAAM technique in NAB production.

Anthrosols in Iron Age Shetland: Implications for Arable and Economic Activity

DEFF Research Database (Denmark)

Guttmann, Erika B.; Simpson, Ian A.; Nielsen, Nina

2008-01-01

The soils surrounding three Iron Age settlements on South Mainland, Shetland, were sampled and compared for indicators of soil amendment. Two of the sites (Old Scatness and Jarlshof) were on lower-lying, better-drained, sheltered land; the third (Clevigarth) was in an acid, exposed environment...... at a higher elevation. The hypothesis, based on previous regional assessments, soil thicknesses, and excavations at Old Scatness, was that the lowland sites would have heavily fertilized soils and that the thin upland soil would show little if any amendment. Our findings indicate that the Middle Iron Age...... soils at Old Scatness had extremely high phosphorus levels, while the soil at Jarlshof had lower levels of enhancement. At Clevigarth, where charcoal from the buried soil was 14C dated to the Neolithic and Bronze Age, there was no evidence of arable activity or soil amendment associated with the Iron...

Age determination of the world’s oldest movable metal types through measuring the “meog” using AMS

Energy Technology Data Exchange (ETDEWEB)

Hong, W., E-mail: whong@kigam.re.kr [Geochemical Analysis Center, Korea Institute of Geoscience and Mineral Resources (KIGAM), 124 Gwahang-no, Yuseong-gu, Daejeon 305-350 (Korea, Republic of); Department of Accelerator and Beam Nano Engineering, University of Science and Technology (UST), 217 Gajeong-ro, Yuseong-gu, Daejeon 305-333 (Korea, Republic of); Lee, S.C. [Cheongju Early Printing Museum, 866 Uncheon-dong, Hongdeok-gu, Cheongju, Chungbuk (Korea, Republic of); Park, J.H.; Park, G. [Geochemical Analysis Center, Korea Institute of Geoscience and Mineral Resources (KIGAM), 124 Gwahang-no, Yuseong-gu, Daejeon 305-350 (Korea, Republic of); Sung, K.H. [Geochemical Analysis Center, Korea Institute of Geoscience and Mineral Resources (KIGAM), 124 Gwahang-no, Yuseong-gu, Daejeon 305-350 (Korea, Republic of); Department of Accelerator and Beam Nano Engineering, University of Science and Technology (UST), 217 Gajeong-ro, Yuseong-gu, Daejeon 305-333 (Korea, Republic of); Lee, J.G. [Geochemical Analysis Center, Korea Institute of Geoscience and Mineral Resources (KIGAM), 124 Gwahang-no, Yuseong-gu, Daejeon 305-350 (Korea, Republic of); Nam, K.H. [Department of Library and Information Science, Kyungpook National University, 67 Kyungdaejungmun-no, Buk-gu, Daegu 702-701 (Korea, Republic of)

2015-10-15

The fabrication year of a set of movable metal types that were thought to be used for printing “Jeungdoga” was investigated. Since the types were made from bronze and did not contain carbon, an organic black ink called “meog” was collected from the type surfaces to quantify their ages. The meog samples were collected from 34 metal types, and 27 ages were obtained. The youngest age was 798 ± 44 yrBP, and the oldest reasonable age was 1166 ± 43 yrBP. The weighted average after eliminating ages with poor statistics was 950 ± 28 yrBP. This age is 300 years older than that of the Jikji (AD 1377), which is a Buddhist document recognized as the world’s oldest document printed using metal types, and also older than that of the Gutenberg bible (AD 1450).

Age determination of the world’s oldest movable metal types through measuring the “meog” using AMS

International Nuclear Information System (INIS)

Hong, W.; Lee, S.C.; Park, J.H.; Park, G.; Sung, K.H.; Lee, J.G.; Nam, K.H.

2015-01-01

The fabrication year of a set of movable metal types that were thought to be used for printing “Jeungdoga” was investigated. Since the types were made from bronze and did not contain carbon, an organic black ink called “meog” was collected from the type surfaces to quantify their ages. The meog samples were collected from 34 metal types, and 27 ages were obtained. The youngest age was 798 ± 44 yrBP, and the oldest reasonable age was 1166 ± 43 yrBP. The weighted average after eliminating ages with poor statistics was 950 ± 28 yrBP. This age is 300 years older than that of the Jikji (AD 1377), which is a Buddhist document recognized as the world’s oldest document printed using metal types, and also older than that of the Gutenberg bible (AD 1450).

Micro-chemical and micro-structural investigation of archaeological bronze weapons from the Ayanis fortress (lake Van, Eastern Anatolia, Turkey)

Science.gov (United States)

Faraldi, F.; Çilingirǒglu, A.; Angelini, E.; Riccucci, C.; De Caro, T.; Batmaz, A.; Mezzi, A.; Caschera, D.; Cortese, B.

2013-12-01

Bronze weapons (VII cen BC) found during the archaeological excavation of the Ayanis fortress (lake Van, eastern Anatolia, Turkey) are investigated in order to determine their chemical composition and metallurgical features as well as to identify the micro-chemical and micro-structural nature of the corrosion products grown during long-term burial. Small fragments were sampled from the artefacts and analysed by means of the combined use of optical microscopy (OM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS). The results show that the bronze artefacts have been manufactured by using alloys with a controlled and refined chemical composition demonstrating the high level metallurgical competence and skill of the Urartian craftsmen and artists. Furthermore, the micro-structural and metallurgical investigations evidence the presence of equiaxed grains in the matrix, indicating that the artefact were produced by repeated cycles of mechanical shaping and thermal annealing treatments to restore the alloy ductility. From the degradation point of view, the results show the structures and the chemical composition of the stratified corrosion layers (i.e. the patina) where the copper or tin depletion phenomenon is commonly observed with the surface enrichment of some elements coming from the burial soil, mainly Cl, which is related to the high concentration of chlorides in the Ayanis soil. The results reveal also that another source of degradation is the inter-granular corrosion phenomenon likely increased by the metallurgical features of the alloys caused by the high temperature manufacturing process that induces crystallisation and segregation phenomena along the grain boundaries.

Pressure dependence of the Peierls transition in the quasi two-dimensional purple bronze KMo 6O 17

Science.gov (United States)

Rötger, A.; Beille, J.; Laurant, J. M.; Schlenker, C.

1993-09-01

The electrical resistivity and the lattice parameters have been studied as a function of pressure on the quasi-twodimensional purple bronze KMo 6O 17 which shows a Peierls transition towards a commensurate charge density wave state. The Peierls temperature is found to be first slightly decreased for pressures smaller than 6 kbar, then strongly increased above. This increase is associated to an anomalous contraction of the lattice parameters in the plane of the layers. The corresponding large increase of the compressibility above 16 kbar at 300 K is associated to the pretransitional regime of the Peierls transition as a function of pressure. These results are attributed mainly to an improved nesting of the Fermi surface under pressure.

Estudo do comportamento da resina base na formulação de compósitos de politetrafluoretileno com bronze

OpenAIRE

Ronaldo Euzébio Bento

2011-01-01

Resumo: Esse trabalho concentra os estudos na investigação das propriedades de resistência a tração e alongamento do compósito de Politetrafluoretileno (PTFE) com 60% de bronze após a substituição do tipo de PTFE utilizado na formulação desse compósito. Atualmente esse compósito utiliza PTFE convencional na formulação e o objetivo é alterar para PTFE modificado. A motivação para essa alteração deveu-se ao fato que o PTFE convencional apresenta disponibilidade limitada dificultando o desenvolv...

Emission of organic compounds from mould and core binders used for casting iron, aluminium and bronze in sand moulds

DEFF Research Database (Denmark)

Tiedje, Niels Skat; Crepaz, Rudolf; Eggert, Torben

2010-01-01

compositions were tested. A test method that provides uniform test conditions is described. The method can be used as general test method to analyse off gasses from binders. Moulds containing a standard size casting were produced and the amount and type of organic compounds resulting from thermal degradation...... of binders was monitored when cast iron, bronze and aluminium was poured in the moulds. Binder degradation was measured by collecting off gasses in a specially designed ventilation hood at a constant flow rate. Samples were taken from the ventilation system and analysed for hydrocarbons and CO content...

Flux pinning in bronze-processed Nb3Sn wires

International Nuclear Information System (INIS)

Suenaga, M.; Welch, D.O.

1980-01-01

The scaling law derived by Kramer for magnetic flux pinning in high magnetic fields was examined for its applicability to the magnetic field dependence of critical-current densities in the bronze processed monofilamentary Nb 3 Sn wires. From this it was concluded that: (1) its prediction for the form of the dependence of critical current on magnetic field and grain size [/J vector /sub c/ x H vector/ approx. h/sup 1/2/(1-h) 2 (1-a 0 √rho) -2 ] was found to be very good in most cases including wires with very small Nb 3 Sn grains (approx. 400 A). It was found very useful in comparison of J/sub c/ for different wires and in extrapolating to obtain H/sub c2/ for these wires. (2) However, it could not account consistently for the anisotropy in critical current of a tape which was measured with H applied perpendicular and parallel to the tape face. (3) The values of kappa 1 which were determined with the scaling law were too small by a factor of 2 to 3, and the trend in the variation with heat-treating time was opposite to that which is reasonably to be expected. That the behavior of kappa 1 is thus seriously in contradiction with the expected behavior for Nb 3 Sn suggests basic faults in the derivation of the scaling equation for critical currents at high magnetic fields

A matter of months: High precision migration chronology of a Bronze Age female.

Directory of Open Access Journals (Sweden)

Karin Margarita Frei

Full Text Available Establishing the age at which prehistoric individuals move away from their childhood residential location holds crucial information about the socio dynamics and mobility patterns in ancient societies. We present a novel combination of strontium isotope analyses performed on the over 3000 year old "Skrydstrup Woman" from Denmark, for whom we compiled a highly detailed month-scale model of her migration timeline. When combined with physical anthropological analyses this timeline can be related to the chronological age at which the residential location changed. We conducted a series of high-resolution strontium isotope analyses of hard and soft human tissues and combined these with anthropological investigations including CT-scanning and 3D visualizations. The Skrydstrup Woman lived during a pan-European period characterized by technical innovation and great social transformations stimulated by long-distance connections; consequently she represents an important part of both Danish and European prehistory. Our multidisciplinary study involves complementary biochemical, biomolecular and microscopy analyses of her scalp hair. Our results reveal that the Skrydstrup Woman was between 17-18 years old when she died, and that she moved from her place of origin -outside present day Denmark- to the Skrydstrup area in Denmark 47 to 42 months before she died. Hence, she was between 13 to 14 years old when she migrated to and resided in the area around Skrydstrup for the rest of her life. From an archaeological standpoint, this one-time and one-way movement of an elite female during the possible "age of marriageability" might suggest that she migrated with the aim of establishing an alliance between chiefdoms. Consequently, this detailed multidisciplinary investigation provides a novel tool to reconstruct high resolution chronology of individual mobility with the perspective of studying complex patterns of social and economic interaction in prehistory.

A matter of months: High precision migration chronology of a Bronze Age female

Science.gov (United States)

Villa, Chiara; Jørkov, Marie Louise; Allentoft, Morten E.; Kaul, Flemming; Ethelberg, Per; Reiter, Samantha S.; Wilson, Andrew S.; Taube, Michelle; Olsen, Jesper; Lynnerup, Niels; Willerslev, Eske; Kristiansen, Kristian; Frei, Robert

2017-01-01

Establishing the age at which prehistoric individuals move away from their childhood residential location holds crucial information about the socio dynamics and mobility patterns in ancient societies. We present a novel combination of strontium isotope analyses performed on the over 3000 year old “Skrydstrup Woman” from Denmark, for whom we compiled a highly detailed month-scale model of her migration timeline. When combined with physical anthropological analyses this timeline can be related to the chronological age at which the residential location changed. We conducted a series of high-resolution strontium isotope analyses of hard and soft human tissues and combined these with anthropological investigations including CT-scanning and 3D visualizations. The Skrydstrup Woman lived during a pan-European period characterized by technical innovation and great social transformations stimulated by long-distance connections; consequently she represents an important part of both Danish and European prehistory. Our multidisciplinary study involves complementary biochemical, biomolecular and microscopy analyses of her scalp hair. Our results reveal that the Skrydstrup Woman was between 17–18 years old when she died, and that she moved from her place of origin -outside present day Denmark- to the Skrydstrup area in Denmark 47 to 42 months before she died. Hence, she was between 13 to 14 years old when she migrated to and resided in the area around Skrydstrup for the rest of her life. From an archaeological standpoint, this one-time and one-way movement of an elite female during the possible “age of marriageability” might suggest that she migrated with the aim of establishing an alliance between chiefdoms. Consequently, this detailed multidisciplinary investigation provides a novel tool to reconstruct high resolution chronology of individual mobility with the perspective of studying complex patterns of social and economic interaction in prehistory. PMID:28582402

Development of a real-time TaqMan assay to detect mendocina sublineage Pseudomonas species in contaminated metalworking fluids.

Science.gov (United States)

Saha, Ratul; Donofrio, Robert S; Bagley, Susan T

2010-08-01

A TaqMan quantitative real-time polymerase chain reaction (qPCR) assay was developed for the detection and enumeration of three Pseudomonas species belonging to the mendocina sublineage (P. oleovorans, P. pseudoalcaligenes, and P. oleovorans subsp. lubricantis) found in contaminated metalworking fluids (MWFs). These microbes are the primary colonizers and serve as indicator organisms of biodegradation of used MWFs. Molecular techniques such as qPCR are preferred for the detection of these microbes since they grow poorly on typical growth media such as R2A agar and Pseudomonas isolation agar (PIA). Traditional culturing techniques not only underestimate the actual distribution of these bacteria but are also time-consuming. The primer-probe pair developed from gyrase B (gyrB) sequences of the targeted bacteria was highly sensitive and specific for the three species. qPCR was performed with both whole cell and genomic DNA to confirm the specificity and sensitivity of the assay. The sensitivity of the assay was 10(1) colony forming units (CFU)/ml for whole cell and 13.7 fg with genomic DNA. The primer-probe pair was successful in determining concentrations from used MWF samples, indicating levels between 2.9 x 10(3) and 3.9 x 10(6) CFU/ml. In contrast, the total count of Pseudomonas sp. recovered on PIA was in the range of <1.0 x 10(1) to 1.4 x 10(5) CFU/ml for the same samples. Based on these results from the qPCR assay, the designed TaqMan primer-probe pair can be efficiently used for rapid (within 2 h) determination of the distribution of these species of Pseudomonas in contaminated MWFs.

Metals from the ritual site of Shaitanskoye Ozero II (Sverdlovsk Oblast, Russia

Directory of Open Access Journals (Sweden)

Nikolaevna Korochkova, Olga

2010-12-01

Full Text Available The present article describes materials from the ritual site of Shaitanskoye Ozero II, Sverdlovsk Oblast. Few excavations carried out at the site measuring less than 240 sq. m in size, yielded more than 160 bronze artifacts: utensils, weapons, rolled copper ornaments, and abundant smelting and casting waste. Apart from Seima-Turbino (celts and laminar knives and Eurasian types (daggers with cast hilts, truncated knives with guards, fluted bracelets and rings, several metal artifacts were revealed manufactured in the style of the Samus-Kizhirovo tradition. Bronze artifacts, stone knives and scrapers, and numerous arrowheads are accompanied by ceramics of the Koptyaki type. Metals use mainly a copper-tin alloy. This assemblage is shown to be relevant to the local tradition of metalworking, which, in this particular region, was comparatively ancient having been left uninterrupted by the rapid migrations of the Seima-Turbino people. In addition, the assemblage indicates the sources from which post-Seima artifacts reached the Alakul people. These artifacts may also have been linked with a large metalworking center located in the Middle Urals.

Este artículo describe los materiales del sitio ritual de Shaitanskoye Ozero II, Provincia de Sverdlovsk. Las reducidas excavaciones emprendidas en el lugar con superficie inferior a los 240 m² han entregado más de 160 objetos de bronce: utensilios, armas, adornos en espiral de cobre y abundantes residuos de la fusión y el trabajo del metal. Además de tipos Seima-Turbino (hachas tubulares y cuchillos planos y Euroasiáticos (puñales de mango fundido, cuchillos con empuñadura de lengüeta, brazaletes y anillos acanalados, varios artefactos metálicos resultaron manufacturados según el estilo de la tradición Samus-Kizhirovo. Los artefactos de bronce, los líticos (cuchillos, raspadores y numerosas puntas de flecha están acompañados por cerámicos de tipo Koptyaki. El metal es

Electric and magnetic properties of oxidic titanium bronzes of rare earths Lnsub(2/3+x)TiOsub(3+-y) with perovskite structure

Energy Technology Data Exchange (ETDEWEB)

Bazuev, G V; Makarova, O V; Shvejkin, G P [AN SSSR, Sverdlovsk. Inst. Khimii

1983-01-01

A study was made on electric and magnetic properties of oxidic titanium bronzes of rare earths and their dependence on rare earth nature and the degree of rare earth sublattice filling was followed. Data on Lnsub(2/3)TiOsub(3-y) (Ln-Ce, Nd) anion-deficient perovskites are given as well. Investigated Cesub(2/3)TiOsub(2.985) and Ndsub(2/3)TiOsub(2.875) phases as well as defectless with respect to oxygen Lnsub(2/3)TiOsub(3) phases have rhombic structure of perovskite type with ordered position of Ln/sup 3 +/ cations and vacancies. Specific electric resistance and thermoelectromotive force factor were determined in vacuum at 290-1173 K for samples in the form of parallelepiped of 3x5x25 mm/sup 3/ size. Magnetic susceptibility chi was determined at 77-300 K by Faraday method using a device based on magnetic balance with electromagnetic compensation. Relative error during chi measuring didn't exceed +-2%. Collectivized behaviour of d-electrons of Ti/sup 3 +/ cations in oxidic titanium bronzes of rare earths: Lnsub(2/3+x)TiOsub(3+-y) (Ln-La, Ce, Nd; 0 < x < 1/3), conditioned by formation of narrow, partly filled ..pi..*-zone, was established on the basis of measuring specific electric resistance and magnetic susceptibility.

Charge-density-wave partial gap opening in quasi-2D KMo6O17 purple bronze studied by angle resolved photoemission spectroscopy

International Nuclear Information System (INIS)

Valbuena, M.A.; Avila, J.; Pantin, V.; Drouard, S.; Guyot, H.; Asensio, M.C.

2006-01-01

Low dimensional (LD) metallic oxides have been a subject of continuous interest in the last two decades, mainly due to the electronic instabilities that they present at low temperatures. In particular, charge density waves (CDW) instabilities associated with a strong electron-phonon interaction have been found in Molybdenum metallic oxides such as KMo 6 O 17 purple bronze. We report an angle resolved photoemission (ARPES) study from room temperature (RT) to T ∼40 K well below the Peierls transition temperature for this material, with CDW transition temperature T CDW ∼120 K. We have focused on photoemission spectra along ΓM high symmetry direction as well as photoemission measurements were taken as a function of temperature at one representative k F point in the Brillouin zone in order to look for the characteristic gap opening after the phase transition. We found out a pseudogap opening and a decrease in the density of states near the Fermi energy, E F , consistent with the partial removal of the nested portions of the Fermi surface (FS) at temperature below the CDW transition. In order to elucidate possible Fermi liquid (FL) or non-Fermi liquid (NFL) behaviour we have compared the ARPES data with that one reported on quasi-1D K 0.3 MoO 3 blue bronze

Kulturní proměny na přelomu doby kamenné a bronzové na Moravě a mimo ni ve světle kamenné štípané industrie

Czech Academy of Sciences Publication Activity Database

Šebela, Lubomír

2016-01-01

Roč. 57, č. 1 (2016), s. 87-121 ISSN 1211-7250 Institutional support: RVO:68081758 Keywords : Moravia * turn of the Stone and Bronze Ages * chipped stone industries * cultural transformations * genesis of the Bronze Age Subject RIV: AC - Archeology, Anthropology, Ethnology http://arub.avcr.cz/miranda2/export/sitesavcr/arub/prehled-vyzkumu/prehled-vydanych-cisel/files/PV-57-1_sebela.pdf

Nová sídliště lužické kultury na Opavsku

Czech Academy of Sciences Publication Activity Database

Juchelka, Jiří

2014-01-01

Roč. 55, č. 1 (2014), s. 113-139 ISSN 1211-7250 Institutional support: RVO:68081758 Keywords : settlement * Lusatian Culture * Czech Silesia * Late Bronze Age * Final Bronze Age * Hallstatt * pottery * prehistoric kiln for pottery production Subject RIV: AC - Archeology, Anthropology, Ethnology http://arub.avcr.cz/miranda2/export/sitesavcr/arub/prehled-vyzkumu/prehled-vydanych-cisel/files/PV55_1_studie_8.pdf

Nontuberculous mycobacteria in the environment.

Science.gov (United States)

Falkinham, Joseph O

2002-09-01

It is likely that the incidence of infection by environmental opportunistic mycobacteria will continue to rise. Part of the rise will be caused by the increased awareness of these microbes as human pathogens and improvements in methods of detection and culture. Clinicians and microbiologists will continue to be challenged by the introduction of new species to the already long list of mycobacterial opportunists (see Table 3). The incidence of infection will also rise because an increasing proportion of the population is aging or subject to some type of immunosuppression. A second reason for an increase in the incidence of environmental mycobacterial infection is that these microbes are everywhere. They are present in water, biofilms, soil, and aerosols. They are natural inhabitants of the human environment, especially drinking water distribution systems. Thus, it is likely that everyone is exposed on a daily basis. It is likely that certain human activities can lead to selection of mycobacteria. Important lessons have been taught by study of cases of hypersensitivity pneumonitis associated with exposure to metalworking fluid. First, the implicated metalworking fluids contained water, the likely source of the mycobacteria. Second, the metalworking fluids contain hydrocarbons (e.g., pine oils) and biocides (e.g., morpholine) both of which are substrates for the growth of mycobacteria [53,193]. Third, outbreak of disease followed disinfection of the metalworking fluid [136,137]. Although the metalworking fluid was contaminated with microorganisms, it was only after disinfection that symptoms developed in the workers. Because mycobacteria are resistant to disinfectants, it is likely that the recovery of the mycobacteria from the metalworking fluid [137] was caused by their selection. Disinfection may also contribute, in part, to the persistence of M avium and M intracellulare in drinking water distribution systems [33,89,240]. M avium and M intracellulare are many times

Тшинецкий культурный круг — связующее звено между Балтийским и Черноморским регионами в эпоху поздней бронзы (2 тыс. до н.э. / Tshinecs cultural circle as a link between the Baltic and Black Sea Regions in the Late Bronze Age (2nd millennium BCE

Directory of Open Access Journals (Sweden)

Lysenko S.D.

2017-12-01

Full Text Available Tshinetsky cultural circle (TCC is a group of related archaeological cultures of the Late Bronze Age in forest and steppe zones of Eastern Europe. It embraces the territory from the Oder River basin in the west to the Desna basin in the east, from the Baltic in the north to the border of the right-bank forest-steppe and steppe in the south. TCC area is divided into Western (Baltic Sea Basin and the Eastern (Black Sea basin arrays. To the west array belongs Tshinets culture, to the east — Komarov (in the forest and Sosnitsa (in Polesie cultures. The only category of culturally significant artifacts for the entire TCC area is a ceramic complex, especially tulip vessels with S-shaped profile and bowls. The origins of morphology of the vessels with S-shaped profile are traced in the archaeological cultures of the Middle Bronze Age of South Baltic (Riesenbecher type vessels. Throughout the entire development the TCC was influenced by the cultural formatuions of the steppe zone of Eastern Europe. The penetration Tshinets-Komorov pottery and metallic adornments in area of steppe cultures of the Northwest Black Sea littoral is traced.

A singular children burial from the Bronce Age site of La Motilla del Azuer (Daimiel, Ciudad Real

Directory of Open Access Journals (Sweden)

Nájera Colino, Trinidad

2006-06-01

Full Text Available A child burial with special grave-goods belonging to the Bronze Age is presented. Very small items manufactured in pottery and clay reproduce the typical forms of the materials documented in the settlement.

Se presenta el hallazgo de un enterramiento infantil de la Edad del Bronce asociado a un ajuar de especiales características. Presenta varios elementos de muy pequeñas dimensiones realizados en cerámica y arcilla que reproducen formas típicas de los materiales del asentamiento.

Surface mechanical property and residual stress of peened nickel-aluminum bronze determined by in-situ X-ray diffraction

Science.gov (United States)

Wang, Chengxi; Jiang, Chuanhai; Zhao, Yuantao; Chen, Ming; Ji, Vincent

2017-10-01

As one of the most important surface strengthening method, shot peening is widely used to improve the fatigue and stress corrosion crack resistance of components by introducing the refined microstructure and compressive residual stress in the surface layer. However, the mechanical properties of this thin layer are different from the base metal and are difficult to be characterized by conventional techniques. In this work, a micro uniaxial tensile tester equipped with in-situ X-ray stress analyzer was employed to make it achievable on a nickel-aluminum bronze with shot peening treatment. According to the equivalent stress-strain relationship based on Von Mises stress criterion, the Young's modulus and yield strength of the peened layer were calculated. The results showed that the Young's modulus was the same as the bulk material, and the yield strength corresponding to the permanent plastic strain of 0.2% was increased by 21% after SP. But the fractographic analysis showed that the fracture feature of the surface layer was likely to transform from the dimple to the cleavage, indicating the improved strength might be attained at the expense of ductility. The monotonic and cyclic loading were also performed via the same combined set-up. In addition, the specific relaxation behavior of compressive residual stress was quantified by linear logarithm relationship between residual stress and cycle numbers. It was found that the compressive residual stress mainly relaxed in the first few cycles, and then reached steady state with further cycles. The relaxation rate and the stable value were chiefly depended on the stress amplitude and number of cycles. The retained residual stress kept in compressive under all given applied stress levels, suggesting that the shot peening could introduce a more stable surface layer of compressive residual stress other than the elevated strength of nickel-aluminum bronze alloy.

Electrochemical zinc insertion into W18O49: Synthesis and characterization of new bronzes

International Nuclear Information System (INIS)

Martinez-de la Cruz, A.; Amador, U.; Rodriguez-Carvajal, J.; Garcia-Alvarado, F.

2005-01-01

Divalent zinc ions have been electrochemically inserted into W 18 O 49 , producing zinc bronzes. Under our experimental conditions, W 18 O 49 accepts zinc reversibly as a guest up to 0.9 ions per formula. The reaction seems to proceed through the formation of a solid solution in which the W-O framework of the parent oxide is maintained. The location of the Zn 2+ ions in the framework of W 18 O 49 has been determined by neutron diffraction on a chemically prepared sample having the composition Zn 0.34 W 18 O 49 . As a main result, we found that Zn prefers to insert in one of the four types of quadrangular tunnels. More precisely, it is displaced from the center to occupy a low coordination site. This result indicates that a significant covalent character exists in the Zn-O bond. - Graphical Abstract: The structure of Zn 0.36 W 18 O 49 projected along the b-axis

Electrochemical fabrication of interconnected tungsten bronze nanosheets for high performance supercapacitor

Science.gov (United States)

Yang, Gan; Liu, Xiao-Xia

2018-04-01

Interconnected H0.12WO3ṡH2O nanosheets with high electrochemical performances are fabricated on partial exfoliated graphite substrate (Ex-GF) by potential-limited pulse galvanostatic method (PLPG). The dead volume problem of bulk pesudocapacitive materials is addressed by the novel interconnected nanosheets structure, enabling a large specific capacitance of 5.95 F cm-2 (495.8 F g-1) at 2 mA cm-2. Merited from the fluent electrolyte penetration channels established by the plenty voids among nanosheets, as well as fast electron transportation in the electronic conductive tungsten bronze which is directly grown from graphite substrate, the obtained WO3/Ex-GF demonstrates excellent rate capability. The material can maintain 60.0% of its capacitance when the discharge current density increases from 2 to 100 mA cm-2. Moreover, WO3/Ex-GF doesn't show capacitance decay after 5000 galvanostatic charge-discharge cycles, displaying its super stability. Furthermore, a high performance asymmetric supercapacitor assembled by using WO3/Ex-GF and electrochemical fabricated MnO2/Ex-GF as negative and positive electrodes, respectively displays a high energy density of 2.88 mWh cm-3 at the power density of 11.1 mW cm-3, demonstrating its potential application for energy storage.

Passivation of laser-treated nickel aluminum bronze as measured by electrochemical impedance spectroscopy

International Nuclear Information System (INIS)

Klassen, R.D.; Hyatt, C.V.; Roberge, P.R.

2000-01-01

Electrochemical impedance spectroscopy was used to assess the corrosion behavior of the weld zones and surface conditions of a laser-clad nickel aluminum bronze immersed in a 3.5% neutral saline solution. The zones and conditions examined included: (i) as-cast base material; (ii) laser-clad material with the high temperature oxide from welding intact; (iii) polished laser-clad material and (iv) specimens representative of just the as-deposited and reheated zones of the laser-clad surface. A pseudo steady-state level of passivation was reached in all the samples within 40 hours. The reheated zone passivated more slowly than the as-deposited region and both weld zones passivated more quickly than the base material. Electrochemical impedance data illustrated a transition during the passivation process of the polished specimens that is consistent with the development of a film layer that restricted mass transfer. The welding oxide from the laser treatment immediately behaved as a passivation film that was indistinguishable from that which eventually develops on polished specimens. (author)

Devil's staircase of odd-number charge order modulations in divalent β -vanadium bronzes under pressure

Science.gov (United States)

Yamauchi, Touru; Ueda, Hiroaki; Ohwada, Kenji; Nakao, Hironori; Ueda, Yutaka

2018-03-01

A common characteristic of quasi-one-dimensional (q1D) conductors β -A0.33V2O5 (A = Li, Na, and Ag) is that the charge ordering (CO), the ground state (GS) at ambient pressure, and the superconducting (SC) phases, the GS under high pressure, are competing with each other. We have explored high-pressure properties of divalent β -vanadium bronzes, β -A0.33V2O5 (A = Ca, Sr, and Pb), which are A -cation stoichiometry finely controlled single-crystal/powder samples, and found the absence of the SC phase. In these observations, however, we observed enormous and novel phase transitions, a kind of "devil's staircase"-type phase transitions in the charge ordering (CO) phases. The most surprising discovery in this devil's staircase, which was found mainly in β -Sr0.33V2O5 , is that all the charge modulation vectors of many kinds of CO phases can be represented as a primitive lattice translation vector along the b axis multiplied by several odd numbers. This discovery surely demonstrates interplay between the charge degree freedom and the crystallographic symmetry. We propose two possible mechanisms to explain this phenomenon: "self-charge transfer (carrier redistribution)" between the two subsystems in these compounds and "sequential symmetry reduction" that was discussed in Landau theory of phase transitions. In β -Ca0.33V2O5 we also found a P -T phase diagram similar in outlook but different in detail. The devil's staircase was also observed but it is an incomplete one. Furthermore, the charge modulation vectors in it are shorter than those in β -Sr0.33V2O5 . In β -Pb0.33V2O5 , which has no CO phase at ambient pressure, the pressure-induced antiferromagnetic ordering was observed at around 50 K above 0.5 GPa. Using these two kinds of mechanisms, we also explain the global high-pressure properties in all the stoichiometric divalent β -vanadium bronzes, which were observed as a wide variety of electromagnetic states. In addition, we also discuss a possible key for

Size-selective pulmonary dose indices for metal-working fluid aerosols in machining and grinding operations in the automobile manufacturing industry.

Science.gov (United States)

Woskie, S R; Smith, T J; Hallock, M F; Hammond, S K; Rosenthal, F; Eisen, E A; Kriebel, D; Greaves, I A

1994-01-01

The current metal-working fluid exposures at three locations that manufacture automotive parts were assessed in conjunction with epidemiological studies of the mortality and respiratory morbidity experiences of workers at these plants. A rationale is presented for selecting and characterizing epidemiologic exposure groups in this environment. More than 475 full-shift personal aerosol samples were taken using a two-stage personal cascade impactor with median size cut-offs of 9.8 microns and 3.5 microns, plus a backup filter. For a sample of 403 workers exposed to aerosols of machining or grinding fluids, the mean total exposure was 706 micrograms/m3 (standard error (SE) = 21 micrograms/m3). Among 72 assemblers unexposed to machining fluids, the mean total exposure was 187 +/- 10 (SE) micrograms/m3. An analysis of variance model identified factors significantly associated with exposure level and permitted estimates of exposure for workers in the unsampled machine type/metal-working fluid groups. Comparison of the results obtained from personal impactor samples with predictions from an aerosol-deposition model for the human respiratory tract showed high correlation. However, the amount collected on the impactor stage underestimates extrathoracic deposition and overestimates tracheobronchial and alveolar deposition, as calculated by the deposition model. When both the impactor concentration and the deposition-model concentration were used to estimate cumulative thoracic concentrations for the worklives of a subset of auto workers, there was no significant difference in the rank order of the subjects' cumulative concentration. However, the cumulative impactor concentration values were significantly higher than the cumulative deposition-model concentration values for the subjects.

Evaluation of copper, aluminum bronze, and copper-nickel for YMP [Yucca Mountain Project] container material

International Nuclear Information System (INIS)

Kass, J.N.

1989-05-01

In this presentation, I will discuss our evaluation of the materials copper, 7% aluminum bronze, and 70/30 copper-nickel. These are three of the six materials currently under consideration as potential waste-packaging materials. I should mention that we are also considering alternatives to these six materials. This work is part of the Yucca Mountain Project (YMP), formerly known as the Nevada Nuclear Waste Storage Investigations (NNWSI) Project. The expected-case environment in our proposed vault is quite different from that encountered at the WIPP site or that expected in a Canadian vault. Our proposed site is under a desert mountain, Yucca Mountain, in southern Nevada. The repository itself will be located approximately 700 feet above the water table and 300 to 1200 feet below the surface of the mountain. The variations in these numbers are due to the variations in mountain topography

Electronic Structures of Purple Bronze KMo6O17 Studied by X-Ray Photoemission Spectra

Science.gov (United States)

Qin, Xiaokui; Wei, Junyin; Shi, Jing; Tian, Mingliang; Chen, Hong; Tian, Decheng

X-ray photoemission spectroscopy study has been performed for the purple bronze KMo6O17. The structures of conduction band and valence band are analogous to the results of ultraviolet photoemission spectra and are also consistent with the model of Travaglini et al., but the gap between conduction and valence band is insignificant. The shape of asymmetric and broadening line of O-1s is due to unresolved contributions from the many inequivalent oxygen sites in this crystal structure. Mo 3d core-level spectrum reveals that there are two kinds of valence states of Molybdenum (Mo+5 and Mo+6). The calculated average valence state is about +5.6, which is consistent with the expectation value from the composition of this material. The tail of Mo-3d spectrum toward higher binding energy is the consequence of the excitation of electron-hole pairs with singularity index of 0.21.

Lorestan Bronze Plate Design Identification by Nondestructive Radiography Method and Image Processing by Means of Histogram Matching

International Nuclear Information System (INIS)

Yahaghi, E.; Movafeghi, A.; Ahmadi, S.; Rokrok, B.; Mohammadzadeh, N.; Rastkhah, N.

2013-01-01

Radiography is known as one of the oldest and most widely used nondestructive testing techniques, where it introduces the most appreciated technique by producing images which are acting as unique fingerprint records of samples of interest. Among the interesting applications of radiography are archaeological and art applications. In this research, radiography was implemented for identification of a damaged art-historical material. The sample was a brass plate belonging to Iran cultural heritage. The estimated age of the plate was about 3500 years. The plate was discovered in Lorestan province, where it is generally called L orestan bronze . The plate was damaged seriously due to serious corrosion environmental attacks, and recognition of the sample was considered as the major problem. The simple radiography method was quite helpful for the plate determination but the method suffered from some major drawbacks due to contrast and thickness measurements. The thickness measurement and corrosion/erosion evaluation were the vital components of the inspection. The image processing techniques and precise thickness measurement method were added to the digitized radiographs. For the digital image processing, a histogram matching algorithm and an edge detection method were used. After all, the resulted image showed an enhanced quality image of the original traces of the hammered design. The results showed that a good experimental setup of radiography along with the image processing technique can give a high quality radiographic image which is able to be used effectively for the identification of art antiques. The human evaluation results also confirmed the ability of the proposed method with a high degree of certainty.

Charge-density-wave partial gap opening in quasi-2D KMo{sub 6}O{sub 17} purple bronze studied by angle resolved photoemission spectroscopy

Energy Technology Data Exchange (ETDEWEB)

Valbuena, M.A. [LURE, Centre Universitaire Paris-Sud, Bat. 209D, B.P. 34, 91898 Orsay Cedex (France); Avila, J. [Instituto de Ciencia de Materiales de Madrid, ICMM - CSIC, 28049 Madrid (Spain); Synchrotron SOLEIL, L' Orme des Merisiers, Saint-Aubin - B.P. 48, 91192 GIF-SUR-YVETTE Cedex (France); Pantin, V. [LURE, Centre Universitaire Paris-Sud, Bat. 209D, B.P. 34, 91898 Orsay Cedex (France); Drouard, S. [LEPES-CENES, B.P. 166x, 38042 Grenoble, Cedex 9 (France); Guyot, H. [LEPES-CENES, B.P. 166x, 38042 Grenoble, Cedex 9 (France); Asensio, M.C. [Instituto de Ciencia de Materiales de Madrid, ICMM - CSIC, 28049 Madrid (Spain) and Synchrotron SOLEIL, L' Orme des Merisiers, Saint-Aubin - B.P. 48, 91192 GIF-SUR-YVETTE Cedex (France)]. E-mail: asensio@synchrotron-soleil.fr

2006-05-30

Low dimensional (LD) metallic oxides have been a subject of continuous interest in the last two decades, mainly due to the electronic instabilities that they present at low temperatures. In particular, charge density waves (CDW) instabilities associated with a strong electron-phonon interaction have been found in Molybdenum metallic oxides such as KMo{sub 6}O{sub 17} purple bronze. We report an angle resolved photoemission (ARPES) study from room temperature (RT) to T {approx}40 K well below the Peierls transition temperature for this material, with CDW transition temperature T {sub CDW} {approx}120 K. We have focused on photoemission spectra along {gamma}M high symmetry direction as well as photoemission measurements were taken as a function of temperature at one representative k {sub F} point in the Brillouin zone in order to look for the characteristic gap opening after the phase transition. We found out a pseudogap opening and a decrease in the density of states near the Fermi energy, E {sub F}, consistent with the partial removal of the nested portions of the Fermi surface (FS) at temperature below the CDW transition. In order to elucidate possible Fermi liquid (FL) or non-Fermi liquid (NFL) behaviour we have compared the ARPES data with that one reported on quasi-1D K{sub 0.3}MoO{sub 3} blue bronze.

Non destructive neutron diffraction measurements of cavities, inhomogeneities, and residual strain in bronzes of Ghiberti's relief from the Gates of Paradise

Science.gov (United States)

Festa, G.; Senesi, R.; Alessandroni, M.; Andreani, C.; Vitali, G.; Porcinai, S.; Giusti, A. M.; Materna, T.; Paradowska, A. M.

2011-03-01

Quantitative neutron studies of cultural heritage objects provide access to microscopic, mesoscopic, and macroscopic structures in a nondestructive manner. In this paper we present a neutron diffraction investigation of a Ghiberti Renaissance gilded bronze relief devoted to the measurement of cavities and inhomogeneities in the bulk of the sample, along with the bulk phase composition and residual strain distribution. The quantitative measurements allowed the determination of the re-melting parts extension, as well as improving current knowledge about the manufacturing process. The study provides significant and unique information to conservators and restorators about the history of the relief.

Non destructive neutron diffraction measurements of cavities, inhomogeneities, and residual strain in bronzes of Ghiberti's relief from the Gates of Paradise

International Nuclear Information System (INIS)

Festa, G.; Senesi, R.; Alessandroni, M.; Andreani, C.; Vitali, G.; Porcinai, S.; Giusti, A. M.; Materna, T.; Paradowska, A. M.

2011-01-01

Quantitative neutron studies of cultural heritage objects provide access to microscopic, mesoscopic, and macroscopic structures in a nondestructive manner. In this paper we present a neutron diffraction investigation of a Ghiberti Renaissance gilded bronze relief devoted to the measurement of cavities and inhomogeneities in the bulk of the sample, along with the bulk phase composition and residual strain distribution. The quantitative measurements allowed the determination of the re-melting parts extension, as well as improving current knowledge about the manufacturing process. The study provides significant and unique information to conservators and restorators about the history of the relief.

Textured and tungsten-bronze-niobate-doped (K,Na,Li)(Nb,Ta)O3 piezoceramic materials

International Nuclear Information System (INIS)

Soller, Thomas; Bathelt, Robert; Benkert, Katrin; Bodinger, Hermann; Schuh, Carsten; Schlenkrich, Falko

2010-01-01

In this study, the effects of an alkaline-earth niobate doping in tungsten-bronze (TB) stoichiometry on the piezoelectric properties and the phase transition temperatures of lead-free (K,Na,Li)(Nb,Ta)O 3 ceramics were investigated. In particular, the TB compounds barium niobate (BN), barium sodium niobate (BNN) and strontium calcium sodium niobate (SCNN) were investigated. The TB-modified ceramics show promising piezoelectric properties with large-signal piezo coefficients, d 33 * lose to 400 pm/V, planar coupling coefficients, k p , up to 0.45 and Curie temperatures of approximately 310 .deg. C. In addition, the effect of texturing on the undoped (K,Na,Li)(Nb,Ta)O 3 base composition via templated grain growth (TGG) with microcrystalline NaNbO 3 templates was examined. Lotgering factors up to 81% and strain enhancements by a factor 1.5 with large-signal values of d 33 * up to 550 pm/V could be achieved in the textured samples.

Demonstration of Neutron Resonance capture applied to a Cultural Heritage study of Antique Benin Bronzes

International Nuclear Information System (INIS)

Blaauw, M.; Postma, H.; Mutti, P.

2001-01-01

In many cases of historical and archaeological studies physical techniques Instrumental Neutron Activation Analysis (INAA) X-Ray Fluorescence (XRF) and Proton Induced X-ray Emission (PIXE) are used to get information about the element composition of objects. INAA is usually carried out using small samples taken from the object . XRF and PIXE only yield surface information, and require cleaning of the surface to suppress the effect of external contamination. Such actions on artefacts are unwanted. Recently neutron capture resonances have been used to identify elements in artefacts using a set of γray detectors and a time-of flight system at the GELINA facility. This allows identification and quantification of elements of precious artefacts in an fully non-destructive way and with very little activation Because of the novelly of the method the principles of neutron resonance capture analysis (NRC A) will be discussed and the results of an applications to a comparative study of two Benin Bronzes presented

A techno-typological analysis of fan (tabular scrapers from Ein Zippori, Israel

Directory of Open Access Journals (Sweden)

Katia Zutovski

2016-09-01

Full Text Available Fan (or tabular scrapers are a diagnostic  tool type in Chalcolithic Ghassulian and Early Bronze Age lithic assemblages from  the southern Levant. To date, only small numbers of fan scrapers have been reported from the Late Pottery Neolithic Wadi Rabah culture. In this paper we present a techno-typological analysis of a fair sample of fan scrapers and fan scrapers spalls from Wadi Rabah and Early Bronze Age layers at Ein Zippori, Lower Galilee, Israel. Techno-typological similarities and differences of Wadi Rabah, Chalcolithic Ghassulian and Early Bronze Age fan scrapers from Ein Zippori and other sites in the region are presented, trends of change along time are noted, and an updated definition is proposed. Our results indicate that fan scrapers are highly efficient tools for accurate and prolonged animal butchering and hide working. The main advantage of fan scrapers is their mostly flat, thin morphology and large size that permits the creation of several relatively long working edges, various retouched angles (from sharp to abrupt, extensive resharpening, and a comfortable grasp. While fan scrapers were products of a local trajectory in Late Pottery Neolithic Wadi Rabah lithic industries at Ein Zippori, a standardized, off-site manufacturing of fan scrapers is evident during the Early Bronze Age.

Early iron age burial complex from the Svrljig area

Directory of Open Access Journals (Sweden)

Filipović Vojislav

2013-01-01

Full Text Available In 2005, a group of objects was ploughed up, comprising a bronze openwork belt, bronze belt parts in the form of a four-spoked wheel, a bronze bell-shaped pendant, the arc of a bimetal fibula, fragment(s of an iron sword, and part(s of a horse's iron bit, at the Kalnica site in the village of Niševac. According to the finder, while ploughing a field, his plough dug up several larger slab-shaped stones, beneath which were found the above objects, as well as fragments of human bones. The most important finds from the Kalnica grave are three parts of a bronze openwork belt (fig. 3a-c and three bronze belt parts in the form of a four-spoked wheel. According to the finder, the belt was composed of three more belt links, two or three parts in the form of a wheel, and a final segment with a larger round buckle. The links of the belt were cast, with dimensions of 4.2-4.3 cm (length, 2-2.1 cm (height and 0.6-0.7 cm (width. All three links were made in the same mold, after which they were decorated with perforations, incisions, and points in an identical manner. The circular bronze parts of the belt in the shape of a four-spoked wheel (fig. 3d-f were cast, with a diametar of 2-2.1 cm, and their height precisely matches the links of the belt. All three circular parts were made in the same mold and then decorated with perforations, incisions, and points. One more item from this group of finds that probably belongs to the belt collection, is a bronze bell-shaped pendant (fig. 4/a, with a height of 4 cm and a diameter of 1.7-1.8 cm. A larger arc of a bimetal fibula was discovered in the grave, with its foot in the shape of an hourglass. The arc is 5.5 cm in width, decorated with dense small ribs. Part of a damaged horse's iron bit 11 x 4.3 cm in dimension was also found in the grave (fig. 4/c. The last find in this collection comprises part of a bent single-bladed iron sword, 11.9 x 4.4 cm (fig. 4/d. In this kind of bent sword, a so-called T end is usually

Rapid detection of rRNA group I pseudomonads in contaminated metalworking fluids and biofilm formation by fluorescent in situ hybridization.

Science.gov (United States)

Saha, Ratul; Donofrio, Robert S; Goeres, Darla M; Bagley, Susan T

2012-05-01

Metalworking fluids (MWFs), used in different machining operations, are highly prone to microbial degradation. Microbial communities present in MWFs lead to biofilm formation in the MWF systems, which act as a continuous source of contamination. Species of rRNA group I Pseudomonas dominate in contaminated MWFs. However, their actual distribution is typically underestimated when using standard culturing techniques as most fail to grow on the commonly used Pseudomonas Isolation Agar. To overcome this, fluorescent in situ hybridization (FISH) was used to study their abundance along with biofilm formation by two species recovered from MWFs, Pseudomonas fluorescens MWF-1 and the newly described Pseudomonas oleovorans subsp. lubricantis. Based on 16S rRNA sequences, a unique fluorescent molecular probe (Pseudo120) was designed targeting a conserved signature sequence common to all rRNA group I Pseudomonas. The specificity of the probe was evaluated using hybridization experiments with whole cells of different Pseudomonas species. The probe's sensitivity was determined to be 10(3) cells/ml. It successfully detected and enumerated the abundance and distribution of Pseudomonas indicating levels between 3.2 (± 1.1) × 10(6) and 5.0 (± 2.3) × 10(6) cells/ml in four different industrial MWF samples collected from three different locations. Biofilm formation was visualized under stagnant conditions using high and low concentrations of cells for both P. fluorescens MWF-1 and P. oleovorans subsp. lubricantis stained with methylene blue and Pseudo120. On the basis of these observations, this molecular probe can be successfully be used in the management of MWF systems to monitor the levels and biofilm formation of rRNA group I pseudomonads.

Charge density wave properties of the quasi two-dimensional purple molybdenum bronze KMo 6O 17

Science.gov (United States)

Balaska, H.; Dumas, J.; Guyot, H.; Mallet, P.; Marcus, J.; Schlenker, C.; Veuillen, J. Y.; Vignolles, D.

2005-06-01

The purple molybdenum bronze KMo 6O 17 is a quasi-two-dimensional compound which shows a Peierls transition towards a commensurate metallic CDW state. Electron spectroscopy (ARUPS), Scanning Tunnelling Microscopy (STM) and spectroscopy (STS) as well as high magnetic field studies are reported. ARUPS studies corroborate the model of the hidden nesting and provide a value of the CDW vector in good agreement with other measurements. STM studies visualize the triple- q CDW in real space. This is consistent with other measurements of the CDW vector. STS studies provide a value of several 10 meV for the average CDW gap. High magnetic field measurements performed in pulsed fields up to 55 T establish that first order transitions to smaller gap states take place at low temperature. These transitions are ascribed to Pauli type coupling. A phase diagram summarizing all observed anomalies and transitions is presented.

Investigation of archaeological metal artefacts by laser-induced breakdown spectroscopy (LIBS)

Science.gov (United States)

Tankova, V.; Malcheva, G.; Blagoev, K.; Leshtakov, L.

2018-03-01

In this work, laser-induced breakdown spectroscopy was applied to determining the elemental composition of a set of ancient bronze artefacts dated from the Late Bronze Age and Early Iron Age (14th – 10th century BC). We used a Nd:YAG laser at 1064 nm with pulse duration of 10 ns and energy of 10 mJ and determined the elemental composition of the bronze alloy that was used in manufacturing the samples under study. The concentrations of tin and lead in the bulk of the examined materials was estimated after generating calibration curves for a set of four standard samples. The preliminary results of the analysis will provide information on the artefacts provenance and on the production process.

Processing by both classical and mechanosynthesis routes and characterization of a new solid solution of tungsten-bronze structure ceramics

International Nuclear Information System (INIS)

Khachane, M.; Moure, A.; Elaatmani, M.; Zegzouti, A.; Daoud, M.; Castro, A.

2006-01-01

A new family of ferroelectric compounds with Ba 2-x Na 1+x Li x Nb 5 O 15 composition (0 ≤ x ≤ 1) and tetragonal tungsten-bronze structure is processed for the first time. This new family of materials derived from Ba 2 NaNb 5 O 15 compound was processed by classical solid-state reaction and by mechanosynthesis. The powders prepared by these two routes were characterized by X-ray diffraction (at room and high temperature), differential thermal analysis, thermogravimetry and scanning electron microscopy. The results confirm the formation of the solid solution in the whole range of composition. The influence of Li addition on the dielectric permittivity and losses and on the ferro-paraelectric transition temperature is also studied

Ageing of low-firing prehistoric ceramics in hydrothermal conditions

Directory of Open Access Journals (Sweden)

Petra Zemenová

2012-03-01

Full Text Available Remains of a prehistoric ceramic object, a moon-shaped idol from the Bronze Age found in archaeological site Zdiby near Prague in the Czech Republic, were studied especially in terms of the firing temperature. Archaeological ceramics was usually fired at temperatures below 1000 °C. It contained unstable non-crystalline products, residua after calcination of clay components of a ceramic material. These products as metakaolinite can undergo a reverse rehydration to a structure close to kaolinite. The aim of this work was to prove whether the identified kaolinite in archaeological ceramics is a product of rehydration. The model compound containing high amount of kaolinite was prepared in order to follow its changes during calcination and hydrothermal treatment. Archaeological ceramics and the model compound were treated by hydrothermal ageing and studied by XRF, XRD and IR analyses. It was proved that the presence of kaolinite in the border-parts of the archaeological object was not a product of rehydration, but that it originated from the raw materials.

Archaeomagnetic Records from Early Bronze to Iron Age Mediterranean Settlements

Science.gov (United States)

Ertepinar, Pinar; Hammond, Megan; Hill, Mimi; Biggin, Andy; Langereis, Cor; Yener, Aslihan; Akar, Murat; Greaves, Alan; Gates, Mary; Harrison, Timothy; Özgen, Ilknur

2017-04-01

Recent studies on the geomagnetic field variations over the Middle East have started to take particular attention due to the presence of numerous high intensity periods proposed by various authors. Considering the recent volume of papers focused on archaeomagnetism in this region, the lack of published work centered in Turkey and Cyprus is surprising since both regions have a long cultural heritage and history of trade and immigration from neighboring countries. Here we present a large dataset of directions and intensities from seven archaeological sites in the Mediterranean with 21 subsets of directional and 40 subsets of intensity data covering a long sequence of levels from 3300 to 700 BCE. The sample sets are composed of both ex-situ potsherds and in-situ features such as mud-bricks, basalts and an ash layer. The results from the rock magnetic experiments run on at least three samples from each set indicate that the magnetic mineral assemblage is composed mostly of pseudo-single domain grain magnetite or titano-magnetite with various Ti content. The majority of the demagnetization diagrams are single component and 14 out of 21 sets have a well-defined characteristic remanent magnetization direction. The directional results show a swing of 37.6° in declination and 26.9° in inclination within an age interval of 2000 years. The archaeointensity experiments involved both microwave and thermal methods. To avoid the anisotropy effects, the applied field is either set parallel to the samples NRM or the angle between the pTRM acquired at the last step used for the best-fit segment and the applied field direction, γ, was checked and found to be less than 7.5°. For the samples that are measured in random directions with respect to their NRM, prior to the intensity experiments, the anisotropy of magnetic susceptibility was individually measured and the anisotropy degree is found to be less than 2.5%. For all the potsherds, one or two samples from each set are

Abertura floral de Dendranthema grandiflora Tzvelev. ´Bronze Repin´após rmazenamento a frio seguido de “pulsing” Floral opening of Dendranthema grandiflora Tzvelev. ´Bronze Repin´after cold storage followed by pulsing

Directory of Open Access Journals (Sweden)

Rogério Antônio Bellé

2004-02-01

Full Text Available Visando estudar a abertura de inflorescências e a vida de vaso de crisântemo (Dendranthema grandiflora Tzvelev. ‘Bronze Repin’ colhido precocemente, montou-se um experimento em delineamento inteiramente casualizado bifatorial 2 x 6 com cinco repetições, realizado no Departamento de Fitotecnia da Universidade Federal de Santa Maria. As hastes foram armazenadas a 2ºC ou 5ºC por sete dias, sendo em seguida tratadas com soluções de “pulsing” por 24h e mantidas em vasos com água de torneira, renovada a cada dois dias. As soluções utilizadas foram: Água (testemunha; Tiosulfato de Prata-STS 11mg.L-1 (Crysal AVB; Ácido Giberélico-GA3 50mg.L-1 (Pro-gibb; Hipoclorito de Sódio-NaOCl 200mg.L-1; 8-Hidroxiquinolina-8-HQ 100mg.L-1; Tiabendazole-TIBA 100mg.L-1(Tecto 100. Com exceção da testemunha, as outras soluções continham 2% de Sacarose. Com estes tratamentos, observou-se que não foi possível uma abertura perfeita da inflorescência, mas a vantagem foi de prolongar a sua vida, podendo-se colocá-las no mercado num momento mais oportuno.The study of opening of inflorescences and the vase life (Dendranthema grandiflora Tzvelev. ‘Bronze Repin’ early picked of chysanthemum, was carried out in an experiment entirely set up in bifactorial 2 x 6 with five repetitions, at the Department of Fitotecnia of Santa Maria’s Federal University. The stems were stored at 2ºC or 5ºC for 7 days, prior to being treated with pulsing solutions for 24 hours and maintained in vases with distilled water, renewed every two days. The solutions used as follows: Water (control; Silver Thiosulfate-STS 11mg.L-1 (Crysal AVB; Giberelic Acid-GA3 50mg.L-1 (Pro-gibb; Sodium Hipochloride-NaOCl 200mg.L-1; 8-Hidroxyquinoline-8-HQ 100mg.L-1; Tiabendazole-TIBA 100mg.L-1 (Tecto 100. With the exception of the control, all solutions contained 2% sucrose. Perfect opening of the flower was not achieved, but vase life could be extended in order to place them in the

The Palaeoenvironmental Impact of Prehistoric Settlement and Proto-Historic Urbanism: Tracing the Emergence of the Oppidum of Corent, Auvergne, France

Science.gov (United States)

Ledger, Paul M.; Miras, Yannick; Poux, Matthieu; Milcent, Pierre Yves

2015-01-01

Early human societies and their interactions with the natural world have been extensively explored in palaeoenvironmental studies across Central and Western Europe. Yet, despite an extensive body of scholarship, there is little consideration of the environmental impacts of proto-historic urbanisation. Typically palaeoenvironmental studies of Bronze and Iron Age societies discuss human impact in terms of woodland clearance, landscape openness and evidence for agriculture. Although these features are clearly key indicators of human settlement, and characterise Neolithic and early to Middle Bronze Age impacts at Corent, they do not appear to represent defining features of a protohistoric urban environment. The Late Iron Age Gallic Oppidum of Corent is remarkable for the paucity of evidence for agriculture and strong representation of apophytes associated with disturbance. Increased floristic diversity – a phenomenon also observed in more recent urban environments – was also noted. The same, although somewhat more pronounced, patterns are noted for the Late Bronze Age and hint at the possibility of a nascent urban area. High percentages of pollen from non-native trees such as Platanus, Castanea and Juglans in the late Bronze Age and Gallic period also suggest trade and cultural exchange, notably with the Mediterranean world. Indeed, these findings question the validity of applying Castanea and Juglans as absolute chronological markers of Romanisation. These results clearly indicate the value of local-scale palaeoecological studies and their potential for tracing the phases in the emergence of a proto-historic urban environment. PMID:25853251

The palaeoenvironmental impact of prehistoric settlement and proto-historic urbanism: tracing the emergence of the Oppidum of Corent, Auvergne, France.

Science.gov (United States)

Ledger, Paul M; Miras, Yannick; Poux, Matthieu; Milcent, Pierre Yves

2015-01-01

Early human societies and their interactions with the natural world have been extensively explored in palaeoenvironmental studies across Central and Western Europe. Yet, despite an extensive body of scholarship, there is little consideration of the environmental impacts of proto-historic urbanisation. Typically palaeoenvironmental studies of Bronze and Iron Age societies discuss human impact in terms of woodland clearance, landscape openness and evidence for agriculture. Although these features are clearly key indicators of human settlement, and characterise Neolithic and early to Middle Bronze Age impacts at Corent, they do not appear to represent defining features of a protohistoric urban environment. The Late Iron Age Gallic Oppidum of Corent is remarkable for the paucity of evidence for agriculture and strong representation of apophytes associated with disturbance. Increased floristic diversity - a phenomenon also observed in more recent urban environments - was also noted. The same, although somewhat more pronounced, patterns are noted for the Late Bronze Age and hint at the possibility of a nascent urban area. High percentages of pollen from non-native trees such as Platanus, Castanea and Juglans in the late Bronze Age and Gallic period also suggest trade and cultural exchange, notably with the Mediterranean world. Indeed, these findings question the validity of applying Castanea and Juglans as absolute chronological markers of Romanisation. These results clearly indicate the value of local-scale palaeoecological studies and their potential for tracing the phases in the emergence of a proto-historic urban environment.

The palaeoenvironmental impact of prehistoric settlement and proto-historic urbanism: tracing the emergence of the Oppidum of Corent, Auvergne, France.

Directory of Open Access Journals (Sweden)

Paul M Ledger

Full Text Available Early human societies and their interactions with the natural world have been extensively explored in palaeoenvironmental studies across Central and Western Europe. Yet, despite an extensive body of scholarship, there is little consideration of the environmental impacts of proto-historic urbanisation. Typically palaeoenvironmental studies of Bronze and Iron Age societies discuss human impact in terms of woodland clearance, landscape openness and evidence for agriculture. Although these features are clearly key indicators of human settlement, and characterise Neolithic and early to Middle Bronze Age impacts at Corent, they do not appear to represent defining features of a protohistoric urban environment. The Late Iron Age Gallic Oppidum of Corent is remarkable for the paucity of evidence for agriculture and strong representation of apophytes associated with disturbance. Increased floristic diversity - a phenomenon also observed in more recent urban environments - was also noted. The same, although somewhat more pronounced, patterns are noted for the Late Bronze Age and hint at the possibility of a nascent urban area. High percentages of pollen from non-native trees such as Platanus, Castanea and Juglans in the late Bronze Age and Gallic period also suggest trade and cultural exchange, notably with the Mediterranean world. Indeed, these findings question the validity of applying Castanea and Juglans as absolute chronological markers of Romanisation. These results clearly indicate the value of local-scale palaeoecological studies and their potential for tracing the phases in the emergence of a proto-historic urban environment.

Leather material found on a 6th B.C. Chinese bronze sword: A technical study

Science.gov (United States)

Luo, Wugan; Si, Yi; Wang, Hongmin; Qin, Ying; Huang, Fengchun; Wang, Changsui

2011-09-01

During July to November, 2006, an important archaeological excavation was conducted in Yun country, Hubei province, southern China. Chinese archaeologists found some remnant of leather materials, covered with red pigments, on a 6th century B.C. Chinese bronze sword. To understand the technology/ies that may have been utilized for manufacturing the leathers, a combined of Raman spectroscopy, FT-IR and XRF was thus applied to the remnant of leather materials. Raman analyses showed that red pigment on the leather was cinnabar (HgS). FT-IR and XRF analyses indicated that the content of some elements, such as Ca (existing as CaCO 3) and Fe (existing as Fe 2O 3), were much higher than those in the surrounding grave soil. The results inferred an application of lime depilation and retting, and the Fe-Al compound salt as tanning agent. And it was furthermore implicated that the Fe-Al salt tanning technique had been developed in the middle and late Spring and Autumn Period of China.

Effect of friction stir processing on erosion–corrosion behavior of nickel–aluminum bronze

International Nuclear Information System (INIS)

Lotfollahi, M.; Shamanian, M.; Saatchi, A.

2014-01-01

Highlights: • The average hardness value of the FSP samples was higher than cast sample. • Erosion–corrosion rate of the FSP samples was higher than cast sample. • The gravimetric analysis showed a negative synergy. - Abstract: In the present investigation, effects of Friction Stir Processing (FSP) on Erosion–Corrosion (E–C) behavior of Nickel–Aluminum Bronze (NAB) were studied by weight-loss measurements and surface characterization using an impingement jet test system. After FSP, the initial coarse microstructure of the cast NAB was transformed to a fine structure, and the porosity defects were eliminated. In addition, different FSP structures were produced by each rotation rate. Microhardness measurements showed a marked increase in FSP samples depending upon the FSP parameters. E–C tests were carried out by erodent at kinetic energies about 0.45 μJ and in 30°, 60° and 90° impact angles to simulate actual service conditions. The maximum weight-loss was observed in FSP samples and Scanning Electron Microscopy (SEM) results showed signs of brittle fracture mechanism in FSP samples. By gravimetric analysis, the degree of synergy was evaluated at 0.45 μJ kinetic energy at normal impact angle and negative synergy result implies the presence of a protective film on all sample surfaces

Electrochemical and spectroscopic evidences of corrosion inhibition of bronze by a triazole derivative

International Nuclear Information System (INIS)

Dermaj, A.; Hajjaji, N.; Joiret, S.; Rahmouni, K.; Srhiri, A.; Takenouti, H.; Vivier, V.

2007-01-01

The electrochemical behavior of the bronze (Cu-8Sn in wt%) was investigated in 3% NaCl aqueous solution, in presence and in absence of a corrosion inhibitor, the 3-phenyl-1,2,4-triazole-5-thione (PTS). The inhibiting effect of the PTS was evidenced for concentrations higher than 1 mM for the cathodic process whereas its effect was clearly seen with a concentration as low as 0.1 mM for the anodic process. A significant positive shift of the corrosion potential was also observed, and its inhibiting effect increased with both its concentration and the immersion time of the sample. From voltammetry and electrochemical impedance spectroscopy experiments, the inhibiting efficiency of the PTS was found to be in the 94-99% range for 1 mM concentration. Scanning electron microscopy and X-ray energy dispersion analysis of the specimen surface show the presence of sulphur on the surface. Raman micro-spectrometry study confirms the protective effect of the PTS in aqueous solution through three types of interactions with the electrode, namely the adsorption of the inhibitor in a flat configuration, the formation of copper-thiol molecules, and when copper is released, the formation of a polymeric complex

Occupational exposure to mineral oil metalworking fluid (MWFs) mist: Development of new methodologies for mist sampling and analysis. Results from an inter-laboratory comparison

International Nuclear Information System (INIS)

Huynh, C Khanh; Herrera, H; Parrat, J; Wolf, R; Perret, V

2009-01-01

Metalworking Fluids (MWFs) are largely used in the sector of undercutting, a large professional activity in Switzerland, in particular in the fine mechanic and watch making industry. France proposes a Permissible Exposure Limit (PEL) of 1 mg.m -3 of aerosol. The American Conference of Governmental Industrial Hygienists (ACGIH) sets its value at 5 mg.m -3 but a proposal to lower the standard ('intended changes') to 0.2 mg.m -3 of aerosol is pending since 2001. However, it has not become a recognized threshold limit value for exposure. Since 2003, the new Swiss PEL (MAK) recommendations would be 0.2 mg.m -3 of aerosol (oil with boiling point > 350 deg. C without additives) and/or 20 mg.m -3 of oil aerosol + vapour for medium or light oil. To evaluate evaporative losses of sampled oil, the German 'Berufsgenossenschaftliches Institut fuer Arbeitssicherheit' (BGIA) recommends the use of a XAD-2 cartridge behind the filter. The method seems to work perfectly for MWFs in a clean occupational atmosphere free from interference of light vapour cleaning solvent such as White Spirit. But, in real situation, machine shop atmosphere contaminated with traces of White Spirit, the BGIA method failed to estimate the MWFs levels (over-estimation). In this paper, we propose a new approach meant to measure both oil vapours and aerosols. Five inter-laboratory comparisons are discussed, based on the production of oil mist in an experimental chamber under controlled conditions.

Dynamic characteristics of Great Bronze Buddha of Kamakura using microtremor

International Nuclear Information System (INIS)

Nakamura, Y; Saita, J.; Tachibana, M.; Sato, T.

2015-01-01

The second largest bronze Buddha in Japan built in around 1250AD at Kamakura immediately above the focal region of the 1923 Kanto earthquake. Great Buddha of Kamakura has still remained basically its original shape, though it has been suffered several natural disasters as losing its hall. Especially, although the 1703 and 1923 Kanto earthquakes caused settlement and sliding of the basement over 0.3 m., the body has been not suffered serious damage. This statue was casted in order from the bottom with many joints. The joint between the head and the body was noticed because it is reinforced by FRP, Fiber Reinforced Plastic, at the time of the last major repair in 1961. And ingenuity was exercised to fence off the earthquake motion over 400 Gal with sliding the body on the basement, to reduce the load for the neck during earthquake. This is the first example of the earthquake isolation system for cultural properties in Japan. Over 50 years passed after the during earthquake motion, microtremor measurement was conducted. As a result of the primary investigation in 2009, the surrounding ground was estimated that liquefaction was occurred at the front and right sides of the basement and the basement suffered damage as settlement. However, it is considered that the propagation of the earthquake motion for the statue was interrupted because of the liquefaction. Thus, it seems that the damage for the statue itself was prevented because of namely the natural isolation system. Additional y in 2013 microtremor of the statue itself was measured for making clear the connection status between the body and the head.

Angular studies of the magnetoresistance in the density wave state of the quasi-two-dimensional purple bronze KMo6O17

Science.gov (United States)

Guyot, H.; Dumas, J.; Kartsovnik, M. V.; Marcus, J.; Schlenker, C.; Sheikin, I.; Vignolles, D.

2007-07-01

The purple molybdenum bronze KMo6O17 is a quasi-two-dimensional compound which shows a Peierls transition towards a commensurate metallic charge density wave (CDW) state. High magnetic field measurements have revealed several transitions at low temperature and have provided an unusual phase diagram “temperature-magnetic field”. Angular studies of the interlayer magnetoresistance are now reported. The results suggest that the orbital coupling of the magnetic field to the CDW is the most likely mechanism for the field induced transitions. The angular dependence of the magnetoresistance is discussed on the basis of a warped quasi-cylindrical Fermi surface and provides information on the geometry of the Fermi surface in the low temperature density wave state.

Wear-triggered self-healing behavior on the surface of nanocrystalline nickel aluminum bronze/Ti3SiC2 composites

Science.gov (United States)

Zhai, Wenzheng; Lu, Wenlong; Zhang, Po; Wang, Jian; Liu, Xiaojun; Zhou, Liping

2018-04-01

Self-healing can protect materials from diverse damages, but is intrinsically difficult in metals. This paper demonstrates a potential method through a simultaneous decomposition and oxidation of Ti3SiC2 to achieve healing of stress cracking on the surface of nickel aluminum bronze (NAB)/Ti3SiC2 nanocrystalline composites during fretting wear. At the finest nanocrystalline materials, a crack recovery would be attained at 76.5%. The repetitive fretting wear leads to a modest amount of 'flowability' of Ti3SiC2 toward the crack, facilitating crack recovery. Along with the wear-triggered self-healing, the NAB/Ti3SiC2 shows an improved tribological performance with the stable decreased friction torque due to the formation of lubrication TiO2 oxide.

A bioarchaeological approach to prehistoric cemetery populations from western and central Greek Macedonia

International Nuclear Information System (INIS)

Triantaphyllou, S.

1999-11-01

The osteological material under study consists of 510 skeletal remains dating from the Early Neolithic (6000 BC) to the Early Iron Age (1100-700 BC). It comes from nine different cemeteries and burial locations extending from the coastal to the inland areas of the study region. The current thesis attempts to explore two major issues: 1) the reconstruction of aspects of life history and 2) the treatment and manipulation of the deceased as revealed by the human skeletal remains. With regard to the former, the investigation of demographic parameters, patterns of health and oral status as well as diet have been considered. In short, local conditions defined by environmental and social constraints probably affected the general quality of life reconstructed for the study populations. There is an overall tendency however, towards declining levels of health and oral status in the Late Bronze and Early Iron Age populations, while certain assemblages provide high levels of infant and child mortality, possibly associated with a type of anaemia. There is also a substantial involvement of the upper skeleton in work patterns, possibly related to activities such as food acquisition, processing and preparation. Meanwhile, the evidence for dietary patterns from the Neolithic/Early Bronze Ages to the Late Bronze/Early Iron Ages is consistent with an overall shift from a high reliance on meat consumption to a diet base on carbohydrate foodstuffs. The evaluation of the manipulation of the deceased, alongside the evidence for mortuary differentiation through time, reveals a striking transformation from the practice of single inhumations in the Early Bronze Age to multiple/secondary burials in the Late Bronze and Early Iron Age assemblages, suggesting a shift in emphasis from individual to lineage-group identity. Furthermore, the integration of biological inferences with the evidence of mortuary behaviour provides further insights into sex roles and the position of subadults, otherwise

Society and economy in the Late Bronze Age and the early Iron Age in the Northeast of the Iberian Peninsula: an approach from the archaeological sources

Directory of Open Access Journals (Sweden)

López Cachero, F. Javier

2007-06-01

Full Text Available

At the end of the Bronze Age, important changes took place among the communities of the northeast of the Iberian Peninsula. These changes continue during the seventh and sixth centuries B.C. and are characterized by a gradual formation of a warrior-type aristocracy. But this “elite” did not consolidate its power definitively until the early Iberian Period, establishing the social structure characteristic of the archaic states of the Iberian Period. Nevertheless, there are social differences among inland and coastal territories. In the inland areas (rivers Segre- Cinca, Guadalope and Matarraña-Algás these differences are the result of local development of societies and, in the coastal areas the main changes take place in parallel with a Phoenician trade, integrating them in the Mediterranean world-system. The local response to this phenomenon was not homogeneous. Differences include chronology, settlement processes and distribution of wealth. We analyze here recent studies on this subject, including the issue of the Urnfield Culture and give special emphasis to the main archaeological contributions of the last decade.  

A finales de la Edad del Bronce comienzan a producirse importantes transformaciones en el seno de las comunidades del noreste peninsular que tendrán continuidad durante los siglos VII y VI ANE y que se caracterizarán por la paulatina formación de una clase aristocrática de

Evolution of coherent collective modes through consecutive charge-density-wave transitions in the (PO2)4(WO3)12 monophosphate tungsten bronze

Science.gov (United States)

Stojchevska, L.; Borovšak, M.; Foury-Leylekian, P.; Pouget, J.-P.; Mertelj, T.; Mihailovic, D.

2017-07-01

All-optical femtosecond relaxation dynamics in a single crystal of monophosphate tungsten bronze (PO2)4(WO3)2m with alternate stacking m =6 of WO3 layers was studied through the three consequent charge-density-wave (CDW) transitions. Several transient coherent collective modes associated with the different CDW transitions were observed and analyzed in the framework of the time-dependent Ginzburg-Landau theory. Remarkably, the interference of the modes leads to an apparent rectification effect in the transient reflectivity response. A saturation of the coherent-mode amplitudes with increasing pump fluence well below the CDWs destruction threshold fluence indicates a decoupling of the electronic and lattice parts of the order parameter on the femtosecond timescale.

40 CFR 747.200 - Triethanolamine salt of tricarboxylic acid.

Science.gov (United States)

2010-07-01

... import for commercial purposes, manufacture solely for export, manufacturer, new chemical substance... (—NO) to a secondary or tertiary amine to form the corresponding nitrosamine. (c) Use limitations. (1) Any person producing a metalworking fluid, or a product which could be used in or as a metalworking...

Minoan and Mycenaean medicine and its Near Eastern contacts.

Science.gov (United States)

Arnott, R

2004-01-01

Few scholars of ancient medicine have considered that Hippocratic practice may be based in part upon the experience and tradition, handed-down from generation to generation, starting before the end of the Bronze Age in 1100 BC. This paper examines the evidence for medical practitioners in the Aegean in the second millennium BC, and of medical contacts between the Aegean and contemporary bronze age societies of Egypt and the Near East at this time, and suggests that some of these contacts may have been the start of Near Eastern influence on Greek medicine.

Observações sôbre o bronzeado do algodoeiro Mocó Observations on bronzing of the Mocó cotton

Directory of Open Access Journals (Sweden)

A. S. Costa

1955-01-01

Full Text Available Uma anomalia do algodoeiro Mocó, denominada bronzeado, vem sendo observada na região do Seridó, Rio Grande do Norte, durante os últimos três anos. Pensou-se, a princípio, que esta anomalia fôsse causada por um vírus, mas as observações relatadas neste trabalho indicam que é causada por um ácaro. As fôlhas das plantas afetadas, especialmente aquelas da metade superior dos galhos, mostram uma coloração bronzeada no lado de baixo. Essa face da fôlha tem também uma superfície rugosa, com brilho vidrado (est. 1, B, as vezes com pequenas áreas de tecido cicatricial. Vistas pelo lado de cima são mais rugosas do que as normais e têm os bordos curvados para baixo. Nos casos graves, as fôlhas do topo dos galhos morrem e caem (est. 2, A e B. A espécie de ácaro causadora do bronzeado do algodoeiro Mocó foi identificada por H. H. Keifer, Sacramento, Calif., como pertencente a um gênero ainda não descrito da família Eriophyidae. Esta espécie está sendo presentemente denominada Anthocoptes sp. até que a sua descrição seja publicada. Populações de 500 a 1.000 indivíduos por centímetro quadrado de fôlha já foram encontradas. Esse ácaro parece ser muito sensível às condições do ambiente, visto que as populações da praga variam entre grandes limites.For the last three years a bronzing anomaly of cotton plants of the Mocó variety (Gossypium hirsutum L. var. maria galante Hutch. has been recorded in the Seridó region (a semi-arid region in the north-eastern part of Brazil, state of Rio Grande do Norte. This anomaly was first thought to be of virus origin, but the observations reported in this paper indicated that it is due to the attack by a species of mite. Leaves from affected plants, especially those on the upper half of the branches, show a bronzing discoloration on the dorsal side, frequently accompanied by a rough and ventral side of these leaves shows some rugosity not present in normal leaves, and in most cases

Nettle as a distinct Bronze Age textile plant

DEFF Research Database (Denmark)

Bergfjord, C.; Mannering, Ulla; Frei, Karin Margarita

2012-01-01

It is generally assumed that the production of plant fibre textiles in ancient Europe, especially woven textiles for clothing, was closely linked to the development of agriculture through the use of cultivated textile plants (flax, hemp). Here we present a new investigation of the 2800 year old...

Healing and medicine in the Aegean Bronze Age.

Science.gov (United States)

Arnott, R

1996-05-01

Since the discovery of the Minoan and Mycenaean civilizations of Crete and Greek mainland, a systematic understanding has been gained of their material culture and social structures. Nevertheless, because of the absence of textual and pictorial evidence of medicine of the kind which exists in the contemporary societies of Egypt and the Near East, little work has been produced on the subject of disease and the practice of medicine in the period. However, new pathological evidence throws much light on this hitherto largely unknown aspect of their civilization.

A study of the Bronze Age insect fauna

OpenAIRE

Reilly, Eileen

2008-01-01

This section examines the insect remains from eleven samples retained during the excavation of site A. The samples are all from ditch fills from a variety of trenches that were dug during the 1993, 1994 and 1995 excavation seasons (§2.5.1). A total of fourteen samples were processed and examined, but three produced no insect remains and are therefore not discussed in detail.As the samples are from different trenches, the insect assemblage can be looked at in a number o...

Chemical corrosion by chlorides on ancient-like bronzes and treatment by hydrogen glow discharge plasma

Science.gov (United States)

Papadopoulou, O.; Novakovic, J.; Vassiliou, P.; Filippaki, E.; Bassiakos, Y.

2013-12-01

Three representative ancient-like bronzes are employed for the chemical synthesis of Cu2(OH)3Cl rich patinas in order to study the influence of the alloying elements in the evolution of the chloride attack and to further conduct stabilization treatment via Hydrogen Glow Discharge Plasma (HGDP) at low temperature and pressure. The corrosion behavior of specimens having Sn and Pb as main alloying elements is governed by a decuprification mechanism and by the formation of Sn-Pb-O enriched barrier layers. In the case of the Zn containing alloy, dezincification is more pronounced at the corrosion initial stages, and copper species predominate the corrosion products evolution. A three-hour HGDP treatment leads to Cu+ production and metallic Cu, Sn, Zn, and Pb redeposition, as a result of metal cation reduction. This process is accompanied by partial removal of Cl species, O diminution, and change in coloration. The further increase of the Cl/O atomic ratio measured on the post-treated surfaces leads to the formation of nantokite and thus to the conclusion that the stabilization of objects with extensive Cl attack is not feasible by HGDP without preliminary chemical treatment.

Impact of copper substitution on the structural, ferroelectric and magnetic properties of tungsten bronze ceramics

Science.gov (United States)

Jindal, Shilpi; Devi, Sheela; Batoo, Khalid Mujasam; Kumar, Gagan; Vasishth, Ajay

2018-05-01

The copper substituted tungsten bronze ceramics with generic formula Ba5CaCuXTi2-xNb8O30(x = 0.0, 0.02, 0.04, 0.06 and 0.08) were successfully synthesized for the first time by solid state reaction method. X-ray diffraction (XRD), Scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDAX) were utilized to examine the different structural parameters and elemental compositions. XRD study depicted the single phase tetragonal structure having space group P4bm. The crystallite size was observed to be in the range 14.4-30.23 nm. The coexistent of ferroelectricity and magnetism was established by P-E and M-H measurements. The P-E loop study indicated an increase in the coercive field (11.805-23.736 kVcm-1) while the M-H study depicted adecrease in the magnetization (7.65 × 10-4-5.32 × 10-4 emu/g) with the incorporation of Cu2+ ions. Raman spectrum depicted that there is shift in the position of Raman modes with the substitution of copper which revealed one-mode behavior in the synthesized ceramics.

شعوب البحر فى المصادر النصیة والأثریة ومظاهر الخلط فى تمثیلهم فى النقوش المصریة

Directory of Open Access Journals (Sweden)

أ.د.سلیمان حامد الحویلى

2015-01-01

Full Text Available We can trace the movements of the Sea Peoples in the Ancient Near East region from the end of the Late Bronze Age to the beginning of the Iron age. Through this period the east Mediterranean region was divided between some Great powers (Egypt, Ḫati, Babylonia and Ashur. The Sea Peoples are conjectured to have sailed around the the Mediterranean and invaded Anatolia, Syria, Canaan, Phoenicia, Cyprus, and Egypt toward the end of the Bronze Age. So this paper will focus in: 1-\tTheir documentary Records. 2-\tTheir Divination. 3-\tThe anachronistic error in representing them in the Reliefs by the Ancient Egyptian artist.

Gas chromatography-mass spectrometry analysis of di-n-octyl disulfide in a straight oil metalworking fluid: application of differential permeation and Box-Cox transformation.

Science.gov (United States)

Xu, Wenhai; Que Hee, Shane S

2006-01-06

The aim of this study was to identify and quantify an unknown peak in the chromatogram of a very complex mixture, a straight oil metalworking fluid (MWF). The fraction that permeated through a thin nitrile polymer membrane had less mineral oil background than the original MWF did at the retention time of the unknown peak, thus facilitating identification by total ion current (TIC) gas chromatography-mass spectrometry (GC-MS). The peak proved to be di-n-octyl disulfide (DOD) through retention time and mass spectral comparisons. Quantitation of DOD was by extracted ion chromatogram analysis of the DOD molecular ion (mass-to-charge ratio (m/z) 290), and of the m/z 71 ion for the internal standard, n-triacontane. Linear models of the area ratio (y) of these two ions versus DOD concentration showed a systematic negative bias at low concentrations, a common occurrence in analysis. The linear model of y(0.8) (from Box-Cox power transformation) versus DOD concentration showed negligible bias from the lowest measured standard of 1.51 mg/L to the highest concentration tested at 75.5 mg/L. The intercept did not differ statistically from zero. The concentration of DOD in the MWF was then calculated to be 0.398+/-0.034% (w/w) by the internal standard method, and 0.387+/-0.036% (w/w) by the method of standard additions. These two results were not significantly different at p Box-Cox transformation is therefore recommended when the data for standards are non-linear.

Physiological characteristics of an aging Olympic athlete.

Science.gov (United States)

Nybo, Lars; Schmidt, Jakob F; Fritzdorf, Stephen; Nordsborg, Nikolai B

2014-11-01

To investigate the physiological basis of continued world-class performance of a world-class rower who won medals (three gold and two bronze) at five consecutive Olympic Games. From the age of 19 to 40 yr, maximal oxygen uptake (VO2 max), peak HR, blood lactate, and rowing ergometer performance were assessed annually. During the first years of his elite career (from age 19 to 24), VO2 max increased from 5.5 to approximately 5.9 L · min(-1) (78 mL · min(-1) · kg(-1)) and his average power during 6-min maximal rowing increased from 420 to approximately 460 W. Although his HRmax declined by approximately 20 bpm during the 20-yr period, maximal aerobic power, evaluated both as VO2 max and 6-min test performance, was maintained until the age of 40. Furthermore, peak lactate levels remained unchanged and average power outputs during 10-s, 60-s, and 60-min ergometer tests were all maintained at approximately 800 W, approximately 700 W, and approximately 350 W, respectively, indicating that he was able to preserve both aerobic and anaerobic exercise performances. Echocardiographic analyses revealed a left ventricular mass of 198 g and left ventricular end-diastolic diameter of 5.8 cm. This longitudinal case indicates that until the age of 40 yr, a steady increase in the oxygen pulse may have compensated for the significant decline in the maximal heart frequency. Furthermore, the maintenance of aerobic and anaerobic exercise capacities allowed this Olympic athlete to compete at the highest level for almost two decades.

Secondary School Design: Workshop Crafts.

Science.gov (United States)

Department of Education and Science, London (England).

Design features are described for school shop facilities. Some general requirements common to most workshops are discussed; and specific design information is provided for general woodwork, general metalwork, and combined wood and metalwork facilities. The grouping of the workshop crafts and their relation to other parts of the school are also…

The Effect of ZrO₂ Nanoparticles on the Microstructure and Properties of Sintered WC-Bronze-Based Diamond Composites.

Science.gov (United States)

Sun, Youhong; Wu, Haidong; Li, Meng; Meng, Qingnan; Gao, Ke; Lü, Xiaoshu; Liu, Baochang

2016-05-06

Metal matrix-impregnated diamond composites are widely used in diamond tool manufacturing. In order to satisfy the increasing engineering requirements, researchers have paid more and more attention to enhancing conventional metal matrices by applying novel methods. In this work, ZrO₂ nanoparticles were introduced into the WC-bronze matrix with and without diamond grits via hot pressing to improve the performance of conventional diamond composites. The effects of ZrO₂ nanoparticles on the microstructure, density, hardness, bending strength, and wear resistance of diamond composites were investigated. The results indicated that the hardness and relative density increased, while the bending strength decreased when the content of ZrO₂ nanoparticles increased. The grinding ratio of diamond composites increased significantly by 60% as a result of nano-ZrO₂ addition. The enhancement mechanism was discussed. Diamond composites showed the best overall properties with the addition of 1 wt % ZrO₂ nanoparticles, thus paving the way for further applications.

L’espace domestique au Bronze final et au premier âge du Fer dans le sud de la Corse

Directory of Open Access Journals (Sweden)

Peche-Quilichini, Kewin

2015-12-01

Full Text Available We present a synthetic approach to the kinds of housing found in the mountainous Alta Rocca sector of southern Corsica during the late Bronze Age and Early Iron Age. Study of protohistoric non-fortified sites in Corsica is relatively new, but the numerous projects carried out in recent years reveal the structural and developmental complexity of living spaces, thus permitting an initial comparative analysis. This is based mainly on the excavations of the large settlement of Cuciurpula that began in 2008 and are still in progress. It also makes use of the 2012 test pits in the villages of Puzzonu and Nuciaresa. The chronology of the areas that were studied cover the entire time span from the 12th to the 4th century B.C., and thus permit one to understand the developmental changes that occurred with respect to both the overall settlement organization and the internal space and architecture of the dwellings.El objetivo de este artículo es ofrecer un acercamiento sintético a las formas de hábitat en Córcega entre el Bronce final (BF y la primera Edad del Hierro (F1, a escala de la microrregión montañosa de la Alta Rocca, ubicada en el sur de Córcega en el corazón de la cuenca occidental del Mediterráneo. La problemática de estudio de los asentamientos protohistóricos sin fortificar es reciente en la isla, sin embargo, en los últimos años los estudios se han multiplicado y dan cuenta de la complejidad estructural y evolutiva de los espacios habitados, permitiendo así un primer análisis comparativo. El razonamiento se apoya esencialmente en la aportación de las excavaciones del gran hábitat de Cuciurpula, iniciadas en 2008 y todavía en curso, así como en la explotación de los poblados de Puzzonu y de Nuciaresa, sondeados en 2012. La cronología de los sectores estudiados permite abarcar un arco cronológico completo entre el siglo XII y el siglo VI a.C., y por tanto aprehender los fenómenos evolutivos, tanto en términos de

Elemental analysis of the ancient bronze coins by x-ray fluorescence technique using simultaneously radioisotope source and x-ray tube

International Nuclear Information System (INIS)

Nguyen The Quynh; Truong Thi An; Tran Duc Thiep; Nguyen Dinh Chien; Dao Tran Cao; Nguyen Quang Liem

2004-01-01

The results on elemental analysis of the Vietnamese ancient bronze coins during the time of the Nguyen dynasty (19th century) are presented. The samples were provided by the vietnam National Historical Museum and the elemental analysis was performed on the home-made model EDS-XT-99-01 X-ray fluorescence spectrometer in the Institute of Materials Science, NCST of Vietnam. The samples exited simultaneously by radioisotope source and X-ray tube. The analytical results show the similarity in the elemental composition of the coins issued by different kings of the Nguyen dynasty, but there is the difference in the concentration of the used elements. Another interesting point is that all the coins have zinc (Zn) in their composition, which shows clearly the influence of the occidental metallurgical technology on the money-making technique in Vietnam during the 19th century. (author)

Iron Age Settlement at Blackstone, Worcestershire: Excavations 1972, 1973, and 1977

Directory of Open Access Journals (Sweden)

Derek Hurst

2010-07-01

Full Text Available Aerial photography in 1957 resulted in the discovery of a rectangular double-ditched enclosure overlooking the Severn floodplain near Bewdley, Worcestershire (UK. Excavation in the 1970s, in advance of gravel extraction, provided limited evidence of Mesolithic, Neolithic and Bronze Age activity prior to occupation in the later Iron Age, when the enclosure was established. This comprised a ditch and bank, and later a palisade and ditch, with single and double portal gateways respectively, and with buildings internally. Pottery and briquetage indicate trading links with the wider region, respectively with west and north Worcestershire, and with Droitwich. The main Iron Age occupation is dated from the 2nd century into the 1st century BC. By the 3rd-4th centuries AD the site was apparently cultivated, as small quantities of Romano-British pottery were scattered across it, probably as a result of manuring arable fields associated with a nearby, but as yet unlocated, settlement. Similarly, in the medieval and post-medieval periods a thin scatter of finds in the overlying soils indicated further agricultural activity. Unusually, the 1979 Iron Age site structural analysis has been largely retained in the current report without full revision but accompanied by a separate modern commentary, allied with the updated finds and environmental reporting, and overall discussion.

Discussion of ‘Style’ from Max Loehr and the Study of Chinese Bronzes, Style and Classification in the History of Art, Ithaca, Cornell University Press: Cornell East Asia Series 2008

OpenAIRE

Robert Bagley

2010-01-01

This essay is the concluding chapter of a study of the work of Max Loehr (1903-1988), an art historian whose visual analysis of unprovenanced Chinese bronzes famously anticipated the discoveries of archaeologists. It argues that Loehr’s strictly pragmatic understanding of style is implicit in the daily practice of most art historians, but that most of our explicit uses of the word, including such everyday expressions as ‘Romanesque style’ and ‘style of Raphael’, presume the existence of a mys...

The Effect of ZrO2 Nanoparticles on the Microstructure and Properties of Sintered WC–Bronze-Based Diamond Composites

Directory of Open Access Journals (Sweden)

Youhong Sun

2016-05-01

Full Text Available Metal matrix-impregnated diamond composites are widely used in diamond tool manufacturing. In order to satisfy the increasing engineering requirements, researchers have paid more and more attention to enhancing conventional metal matrices by applying novel methods. In this work, ZrO2 nanoparticles were introduced into the WC–bronze matrix with and without diamond grits via hot pressing to improve the performance of conventional diamond composites. The effects of ZrO2 nanoparticles on the microstructure, density, hardness, bending strength, and wear resistance of diamond composites were investigated. The results indicated that the hardness and relative density increased, while the bending strength decreased when the content of ZrO2 nanoparticles increased. The grinding ratio of diamond composites increased significantly by 60% as a result of nano-ZrO2 addition. The enhancement mechanism was discussed. Diamond composites showed the best overall properties with the addition of 1 wt % ZrO2 nanoparticles, thus paving the way for further applications.

The Effect of ZrO2 Nanoparticles on the Microstructure and Properties of Sintered WC–Bronze-Based Diamond Composites

Science.gov (United States)

Sun, Youhong; Wu, Haidong; Li, Meng; Meng, Qingnan; Gao, Ke; Lü, Xiaoshu; Liu, Baochang

2016-01-01

Metal matrix-impregnated diamond composites are widely used in diamond tool manufacturing. In order to satisfy the increasing engineering requirements, researchers have paid more and more attention to enhancing conventional metal matrices by applying novel methods. In this work, ZrO2 nanoparticles were introduced into the WC–bronze matrix with and without diamond grits via hot pressing to improve the performance of conventional diamond composites. The effects of ZrO2 nanoparticles on the microstructure, density, hardness, bending strength, and wear resistance of diamond composites were investigated. The results indicated that the hardness and relative density increased, while the bending strength decreased when the content of ZrO2 nanoparticles increased. The grinding ratio of diamond composites increased significantly by 60% as a result of nano-ZrO2 addition. The enhancement mechanism was discussed. Diamond composites showed the best overall properties with the addition of 1 wt % ZrO2 nanoparticles, thus paving the way for further applications. PMID:28773469

Continuity and Admixture in the Last Five Millennia of Levantine History from Ancient Canaanite and Present-Day Lebanese Genome Sequences.

Science.gov (United States)

Haber, Marc; Doumet-Serhal, Claude; Scheib, Christiana; Xue, Yali; Danecek, Petr; Mezzavilla, Massimo; Youhanna, Sonia; Martiniano, Rui; Prado-Martinez, Javier; Szpak, Michał; Matisoo-Smith, Elizabeth; Schutkowski, Holger; Mikulski, Richard; Zalloua, Pierre; Kivisild, Toomas; Tyler-Smith, Chris

2017-08-03

The Canaanites inhabited the Levant region during the Bronze Age and established a culture that became influential in the Near East and beyond. However, the Canaanites, unlike most other ancient Near Easterners of this period, left few surviving textual records and thus their origin and relationship to ancient and present-day populations remain unclear. In this study, we sequenced five whole genomes from ∼3,700-year-old individuals from the city of Sidon, a major Canaanite city-state on the Eastern Mediterranean coast. We also sequenced the genomes of 99 individuals from present-day Lebanon to catalog modern Levantine genetic diversity. We find that a Bronze Age Canaanite-related ancestry was widespread in the region, shared among urban populations inhabiting the coast (Sidon) and inland populations (Jordan) who likely lived in farming societies or were pastoral nomads. This Canaanite-related ancestry derived from mixture between local Neolithic populations and eastern migrants genetically related to Chalcolithic Iranians. We estimate, using linkage-disequilibrium decay patterns, that admixture occurred 6,600-3,550 years ago, coinciding with recorded massive population movements in Mesopotamia during the mid-Holocene. We show that present-day Lebanese derive most of their ancestry from a Canaanite-related population, which therefore implies substantial genetic continuity in the Levant since at least the Bronze Age. In addition, we find Eurasian ancestry in the Lebanese not present in Bronze Age or earlier Levantines. We estimate that this Eurasian ancestry arrived in the Levant around 3,750-2,170 years ago during a period of successive conquests by distant populations. Copyright © 2017 The Author(s). Published by Elsevier Inc. All rights reserved.

Energy conservation potential of surface modification technologies

Energy Technology Data Exchange (ETDEWEB)

Le, H.K.; Horne, D.M.; Silberglitt, R.S.

1985-09-01

This report assesses the energy conservation impact of surface modification technologies on the metalworking industries. The energy conservation impact of surface modification technologies on the metalworking industries is assessed by estimating their friction and wear tribological sinks and the subsequent reduction in these sinks when surface modified tools are used. Ion implantation, coatings, and laser and electron beam surface modifications are considered.

La espada de La Perla. Estudio de las empuñaduras de remaches con doble arco: un Unicum en la serie de armas europeas de la Edad del Bronce

Directory of Open Access Journals (Sweden)

Gómez Ramos, Pablo

2001-12-01

Full Text Available The study of the Bronze-Age sword from La Perla (Madrid, Spain shows the development of a unique hilt design in the shape of a double-arch during the Early and Middle Bronze Ages. After the well-known paper by Almagro-Gorbea in 1972 on the Guadalajara sword, new archaeological finds during the last thirty years have shown the singularity of this system as against those employed in other parts of Europe, a singularity confirmed by numerous metallurgical analyses of Bronze Age swords.

El estudio de la espada madrileña de La Perla viene a constatar un modelo único de enmangar espadas en España durante el Bronce Antiguo y Medio, mediante empuñaduras de doble arco. Desde el trabajo clásico de Almagro Gorbea en 1972 sobre la espada de Guadalajara, se han venido sucediendo en estas casi tres décadas, nuevos hallazgos arqueológicos que refuerzan la singularidad del ejemplo español con respecto a otras áreas europeas y que se completa con la investigación de los análisis metalúrgicos realizados a numerosas espadas de la Edad del Bronce.

Economic and social activities on ancient Cypriot terraced landscapes.

Science.gov (United States)

Ridder, Elizabeth; Galletti, Christopher S; Fall, Patricia L; Falconer, Steven E

2017-11-01

We investigate ancient agricultural terraces and their associated social and economic activities across the site complex consisting of the village at Politiko-Troullia and its more extensive associated taskscape. Surface artifact distributions mapped over 12 ha are integrated with evidence excavated from this Bronze Age settlement in central Cyprus. Contrary to expectations, artifact densities do not diminish with distance from the village architecture. In particular, concentrations of Prehistoric Bronze Age ceramics and ground stone artifacts are most pronounced on nearby terraced hillsides. These terraces were not utilized for domestic structures, but for extensive processing of agricultural crops and copper ore. Bronze Age excavated plant remains indicate cultivation of olives, grapes and figs, with wood resources dominated by olive and pine. Larger, non-portable ground stones and gaming stones are associated with communal social and economic activities in open courtyard settings in Politiko-Troullia. This category of ground stone also is particularly common on the terraced hillsides around Troullia, suggesting that similar behaviors occurred beyond village structures. The terraced landscape of Politiko-Troullia exemplifies a multi-faceted taskscape with a range of agricultural, metallurgical and social activities. Copyright © 2016 Elsevier Ltd. All rights reserved.

Corrosion on prehistoric Cu-Sn-alloys: the influence of artificial environment and storage

Science.gov (United States)

Mödlinger, Marianne; Piccardo, Paolo

2013-12-01

The paper contributes to the identification of different corrosion products detected on the cross-section specimens sampled from Bronze Age swords and one helmet found between 60-160 years ago. The objects are kept in 1889 built oak showcases at the Natural History Museum Vienna, having suffered unknown restoration treatments. The identified corrosion products not only affect further eventual treatment in conservation science of copper base objects but also contribute to identify the often unknown find context, which is meant to facilitate archaeological interpretation of the Bronze Age weapons. The analyses of the samples were carried out using SEM-EDXS-EBSD and optical microscopy.

Influence of Casting Defects on S- N Fatigue Behavior of Ni-Al Bronze

Science.gov (United States)

Sarkar, Aritra; Chakrabarti, Abhishek; Nagesha, A.; Saravanan, T.; Arunmuthu, K.; Sandhya, R.; Philip, John; Mathew, M. D.; Jayakumar, T.

2015-02-01

Nickel-aluminum bronze (NAB) alloys have been used extensively in marine applications such as propellers, couplings, pump casings, and pump impellers due to their good mechanical properties such as tensile strength, creep resistance, and corrosion resistance. However, there have been several instances of in-service failure of the alloy due to high cycle fatigue (HCF). The present paper aims at characterizing the casting defects in this alloy through X-ray radiography and X-ray computed tomography into distinct defect groups having particular defect size and location. HCF tests were carried out on each defect group of as-cast NAB at room temperature by varying the mean stress. A significant decrease in the HCF life was observed with an increase in the tensile mean stress, irrespective of the defect size. Further, a considerable drop in the HCF life was observed with an increase in the size of defects and proximity of the defects to the surface. However, the surface proximity indicated by location of the defect in the sample was seen to override the influence of defect size and maximum cyclic stress. This leads to huge scatter in S- N curve. For a detailed quantitative analysis of defect size and location, an empirical model is developed which was able to minimize the scatter to a significant extent. Further, a concept of critical distance is proposed, beyond which the defect would not have a deleterious consequence on the fatigue behavior. Such an approach was found to be suitable for generating S- N curves for cast NAB.

Reconstruction of settlement phases at Intermediate Bronze Age structures in the Negev Highlands (Israel) using luminescence dating

Science.gov (United States)

Junge, Andrea; Lomax, Johanna; Shahack-Gross, Ruth; Dunseth, Zachary C.; Finkelstein, Israel; Fuchs, Markus

2016-04-01

OSL dating is usually applied to sediments in paleoenvironmental sciences. However, there is only limited experience with determining the age of archaeological stone structures by OSL using dust deposits associated with these structures. The age of trapped dust deposits may be used to date the onset of settlement (sediment below structures), settlement activity (occupation layer), or the time after settlement (sediment between collapsed walls and roofs). In this study, OSL dating is applied for establishing a chronology of settlement structures situated in the Negev Highlands, Israel. Two archaeological sites are investigated to identify the occupation history, by dating the aeolian dust trapped within the remains of ancient buildings. OSL dating techniques are applied using coarse grain quartz and a standard SAR protocol. First results indicate that the luminescence properties of the trapped sediments are suitable for OSL dating. Therefore, it was possible to date the onset of sedimentation in a later phase of the human occupation or shortly after the settlement was abandoned, which is supported by archaeological evidence gained from pottery finds and the architecture of the buildings.

Characterization of inorganic wastes from metal working industries

International Nuclear Information System (INIS)

Gomez, A.; Viguri, J.R.; Andres, A.; Irabien, A.; Guise, L.; Magalhaes, J.; Castro, F.

1999-01-01

The paper present the results obtained in the characterisation of metalworking wastes, with the sampling of wastes and characterisation data interpretation subjects as the main studied steps. The results of this work allow to establish the environmental impact assessment of the inorganic wastes from a wide range of metalworking processes in order to determine the optimum options to their management (treatment and/or reuses)

Možnosti hodnocení dentální patologie na archeologickém kostrovém materiálu: prevalence zubního kazu od pravěku po novověk

Czech Academy of Sciences Publication Activity Database

Stránská, Petra

2013-01-01

Roč. 152, č. 4 (2013), s. 196-205 ISSN 0008-7335 Institutional research plan: CEZ:AV0Z80020508 Keywords : dental health * younger Eneolithic * Bronze Age * Early Middle Ages * modern times Subject RIV: AC - Archeology, Anthropology, Ethnology

Effect of Post Heat Treatment on the Microstructure and Microhardness of Friction Stir Processed NiAl Bronze (NAB Alloy

Directory of Open Access Journals (Sweden)

Yuting Lv

2015-09-01

Full Text Available NiAl bronze (NAB alloy is prepared by using friction stir processing (FSP technique at a tool rotation rate of 1200 rpm and a traverse speed of 150 mm/min. A post heat treatment is performed at the temperature of 675 °C. The effect of heat treatment on the microstructure and microhardness is studied. The results show that the microstructure of the FSP NAB alloy consists of high density dislocations, retained β phase (β′ phase and recrystallized grains. When annealed at 675 °C, discontinuous static recrystallization (DSRX takes place. The content of β′ phase gradually decreases and fine κ phase is precipitated. After annealing for 2 h, both the microhardness of the FSP sample in the stir zone (SZ and the difference in hardness between the SZ and base metal decrease due to the reduction of the dislocation density and β′ phase, accompanying recrystallized grain coarsening. With further increasing of the annealing time to 4 h, the aforementioned difference in hardness nearly disappears.

Un nouvel habitat du Bronze final IIIb dans le Val d’Orléans et ses traces de métallurgie du fer : Bonnée, Les Terres à l’Est du Bourg (Centre, Loiret A new settlement from late Bronze IIIb in the val d’Orléans: Bonnée, Les Terres à l’Est du Bourg (lands to the east of the town (Centre, Loiret

Directory of Open Access Journals (Sweden)

Stéphane Joly

2011-12-01

Full Text Available La multiplication récente des diagnostics archéologiques autour du petit bourg actuel de Bonnée a permis la détection d’une occupation du Bronze final IIIb (circa 900-750 av. n.-e. sur environ un hectare aux Terres à l’Est du Bourg. Les limites inhérentes à ce type d’intervention réduisent l’interprétation des structures et toute approche spatiale de ce probable habitat repéré. L’étude conjointe des différents mobiliers en particulier céramique et métallurgique, mais aussi le torchis et la faune, atteste de sa culture matérielle et de son intérêt. Ces scories pourraient être parmi les plus anciennes traces en région Centre d’activité métallurgique du fer. Des activités de post-réduction sont avérées et certaines opérations de forgeage sont supposées.La découverte de cet habitat dans ce secteur du lit majeur de la Loire, apporte de nouvelles données concernant l’occupation du sol et ses problématiques évolutives dans le Val d’Orléans sur ces périodes de transition avec le Hallstatt ancien.The recent increase in the archaeological evaluations around the village of Bonnée has enabled the discovery of a final Bronze Age IIIb settlement (circa 900-750 BP on about a hectare of the Terres à l’Est du Bourg. The limits inherent in this type of work restrict the interpretation of structures and all spatial approaches to this likely dwelling. The joint study of the different furnishings, in particular ceramics and metal, but also the cob and fauna, attests to its material culture and its interest. The slag could be amongst the oldest iron metallurgy remains from the Centre region. Some activities of post-forging are proven and certain operations are guessed at. The discovery of this settlement in this sector of the major bed of the Loire, has produced new data concerning the occupation of the land and its evolutionary problems in the valley of Orleans over these periods of transition in the early

Exchange networks from close-up: The case of Lipari obsidian

Directory of Open Access Journals (Sweden)

Andrea Vianello

2016-09-01

Full Text Available A systematic study on obsidian tools in Calabria and Sicily carried out by the authors have revealed the uniqueness in the patterns of production, exchange and consumption of Lipari obsidian. The study has concentrated on the Middle Neolithic primarily, with other Neolithic and Bronze Age contexts recognised at a later stage in the research since many contexts, especially in Sicily, have been excavated by pioneering archaeologists, some over a century ago, or were mislabelled. The chronology is Early Neolithic to Early Bronze Age, with very few materials dating Middle Bronze Age. A review of chronological contexts is in progress, which spans from the 6th millennium BC to the end of the 2nd millennium BC. The typology of obsidian tools is very homogenous, the vast majority of used tools are small blades, bladelets and sharp flakes; there is negligible variance across time; and Lipari obsidian is preferred over other sources. The patterns of the exchanges are also unique, revealing two major types of redistribution of obsidian, one particularly intriguing because it is quite organized with a single source in Lipari, prominent and reminiscent for its stability and reach of Bronze Age redistribution dynamics associated with hierarchical societies. We present here some observations on patterns substantiated by the archaeological record, and consider possible scenarios that can explain them. This work provides an update on progressing research and reveals aspects that will need further investigation, focusing on the patterns identified so far and possible explanations. More work is certainly needed to produce a working model, but the unusual patterns deserve some attention on their own, unencumbered by an overarching explanatory model. In particular, we want to assess the Neolithic redistribution pattern suggestive as typical of hierarchical polities, and contextualize it to the specific situation of Neolithic Lipari.

Geoscience rediscovers Phoenicia's buried harbors

Science.gov (United States)

Marriner, Nick; Morhange, Christophe; Doumet-Serhal, Claude; Carbonel, Pierre

2006-01-01

After centuries of archaeological debate, the harbors of Phoenicia's two most important city states, Tyre and Sidon, have been rediscovered, and including new geoarcheological results reveal how, where, and when they evolved after their Bronze Age foundations. The early ports lie beneath their present urban centers, and we have indentified four harbor phases. (1) During the Bronze Age, Tyre and Sidon were characterized by semi-open marine coves that served as protoharbors. (2) Biostratigraphic and lithostratigraphic data indicate the presence of early artificial basins after the first millennium B.C. (3) The harbors reached their apogees during the Greco-Roman and Byzantine periods. (4) Silting up and coastal progradation led to burial of the medieval basins, lost until now.

Occupation and bladder cancer in a population-based case-control study in Northern New England.

Science.gov (United States)

Colt, Joanne S; Karagas, Margaret R; Schwenn, Molly; Baris, Dalsu; Johnson, Alison; Stewart, Patricia; Verrill, Castine; Moore, Lee E; Lubin, Jay; Ward, Mary H; Samanic, Claudine; Rothman, Nathaniel; Cantor, Kenneth P; Beane Freeman, Laura E; Schned, Alan; Cherala, Sai; Silverman, Debra T

2011-04-01

We used data from a large, population-based case-control study in Maine, New Hampshire, and Vermont to examine relationships between occupation, industry and bladder cancer risk. Lifetime occupational histories were obtained by personal interview from 1158 patients newly diagnosed with urothelial carcinoma of the bladder in 2001-2004, and from 1402 population controls. Unconditional logistic regression was used to calculate ORs and 95% CIs, adjusted for demographic factors, smoking and employment in other high-risk occupations. Male precision metalworkers and metalworking/plasticworking machine operators had significantly elevated risks and significant trends in risk with duration of employment (precision metalworkers: OR 2.2, 95% CI 1.4 to 3.4, p(trend) = 0.0065; metalworking/plasticworking machine operators: OR 1.6, 95% CI 1.01 to 2.6, p(trend) = 0.047). Other occupations/industries for which risk increased significantly with duration of employment included: for men, textile machine operators, mechanics/repairers, automobile mechanics, plumbers, computer systems analysts, information clerks, and landscape industry workers; for women, service occupations, health services, cleaning and building services, management-related occupations, electronic components manufacturing and transportation equipment manufacturing. Men reporting use of metalworking fluids (MWF) had a significantly elevated bladder cancer risk (OR 1.7, 95% CI 1.1 to 2.5). Our findings support the hypothesis that some component(s) of MWF may be carcinogenic to the bladder. Our results also corroborate many other previously reported associations between bladder cancer risk and various occupations. More detailed analyses using information from the study's job-specific questionnaires may help to identify MWF components that may be carcinogenic, and other bladder carcinogens associated with a variety of occupations.

Bronze flagon from Pontes with an inscription from the 29th Psalm of David

Directory of Open Access Journals (Sweden)

Popović Ivana

2015-01-01

Full Text Available During the campaign which took place in 1983 at the site of Pontes - Trajan’s Bridge near Kostol, in the layer between a house from the second half of the 9th century and a house from the 11th century, a treasury consisting of medieval iron tools placed around, or inserted into, a bronze flagon was discovered in a shallow pit. The whole find was named Treasury B. At first, the flagon itself was dated into the period between the 6th and the 8th centuries, however, we have recently dated it into the 6th-7th century. The inscription on the neck of the vessel is a paraphrase of the 3rd verse from the 29th Psalm of David. This is proof that the flagon was a liturgical vessel. In this text we are trying to show that this flagon was analogous to the specimen from the treasury from Vrap in Albania, whose deposition during the third part of the 7th century is connected with the activity of Bulgarian Khan Kuber. The Byzantine vessel was a part of treasure plundered from the Avars, and the production of this flagon, just as of that one from Pontes, can be dated into the period between the 6th century and the first half or the middle of the 7th century. [Projekat Ministarstva nauke Republike Srbije, br. 177007: Romanisation, urbanisation and transformation of urban centres of civil, military and residential character in Roman provinces in the territory of Serbia

Los primeros objetos de bronce en el occidente de Europa

Directory of Open Access Journals (Sweden)

Fernández-Miranda, Manuel

1995-06-01

Full Text Available The alloy of copper with tin is used to show cultural relations and exchanges between Bronze Age cultures in western and central Europe. At the beginning, the distribution and location of tin resources explains the variations in bronze composition, but interregional ex-change leads later to a more homogeneous alloy. During the Early Bronze Age the Iberian Peninsula was not connected to the exchange networks of western Europe, and the first true bronzes appear at least two centuries la ter. The tin alloy spread over Iberia from north to south, and arrive to South-east at the end of the Middle Brome Age, due to the isolation of this region.

A través del uso de la aleación de cobre y estaño en la tecnología metalúrgica de la Edad del Bronce europea se analizan las relaciones culturales e intercambios que tienen lugar entre los diversos grupos culturales. Al principio la disponibilidad de recursos minerales de estaño condicionó la composición de la aleación, pero más tarde el establecimiento de relaciones comerciales condujo a una mayor homogeneización en la producción. La Península Ibérica aparece durante el Bronce Antiguo desconectada de las interacciones actuantes en el Occidente de Europa, acusando un retraso en el conocimiento del bronce de al menos dos siglos. La difusión de la aleación se produce de norte a sur, llegando al Sureste a fines del Bronce Medio como consecuencia de su aislamiento.

Many shades of brown : The condition and colour of Dutch archaeological textiles from dryland sandy soils, bogs, and the sea

NARCIS (Netherlands)

Joosten, I.; van Bommel, M.R.; Kluiving, S.; Kootker, L.; Hermans, R.

2017-01-01

Archaeological textiles excavated from Dutch soils usually have a brown appearance. Three sets of woollen textile finds varying both in age and burial context were analysed to study their original character. Bog finds from the Bronze Age (2000‑800 BC) and late Iron Age (250-12 BC) were compared to

Centre and Periphery in the Linear B Archives

DEFF Research Database (Denmark)

Nosch, Marie-Louise Bech

2003-01-01

Investigation of the perception of space and geographi in the Bronze Age administration. Three concepts are occuring: palace versus territory; province A versus province B; Centrum versus periphery....

Horse size and domestication: Early equid bones from the Czech Republic in the European context

Czech Academy of Sciences Publication Activity Database

Kyselý, René; Peške, L.

2016-01-01

Roč. 51, č. 1 (2016), s. 15-39 ISSN 0761-3032 Institutional support: RVO:67985912 Keywords : Horse (Equus) * E. hydruntinus * osteometry * domestication * Czech Republic * Bohemia * Neolithic * Copper Age * Bronze Age * LSI Subject RIV: AC - Archeology, Anthropology, Ethnology Impact factor: 0.607, year: 2016

'When elephants battle, the grass suffers.' Power, ivory and the Syrian elephant

NARCIS (Netherlands)

Çakirlar, Canan

2016-01-01

The craftsmanship of the ivory objects in Late Bronze Age and Iron Age Eastern Mediterranean leave no doubt as to their intention to impress. Elephant teeth are an important raw material for the manufacture of these objects. Zooarchaeological research shows that cranial, dental, and postcranial

Performance of palm oil as a biobased machining lubricant when drilling inconel 718

OpenAIRE

Abd Rahim Erween; Sasahara Hiroyuki

2017-01-01

Metalworking fluid acts as cooling and lubrication agent at the cutting zone in the machining process. However, conventional Metalworking fluid such mineral oil gives negative impact on the human and environment. Therefore, the manufacture tends to substitute the mineral oil to bio-based oil such as vegetables and synthetic oil. In this paper, the drilling experiment was carried out to evaluate the efficiency of palm oil and compare it with minimal quantity lubrication technique using synthet...

Non-destructive analysis of ancient bimetal swords from western Asia by γ-ray radiography and X-ray fluorescence

Science.gov (United States)

Shizuma, Kiyoshi; Kajimoto, Tsuyoshi; Endo, Satoru; Matsugi, Kazuhiro; Arimatsu, Yui; Nojima, Hisashi

2017-09-01

Eight ancient bimetal swords held by Hiroshima University, Japan were analyzed non-destructively through γ-ray radiography and X-ray fluorescence (XRF). 137Cs and 60Co γ-ray irradiation sources were used to obtain transmission images of swords. A scanning radiography method using a 60Co γ-ray source was developed. XRF was used for qualitative elemental analysis of the swords. The presence of iron cores in the hilts of some swords had been observed and it was assumed that the cores were a ritual symbol or had a functional purpose. However, our work reveals that these swords were originally bronze-hilted iron swords and that the rusty blades were replaced with bronze blades to maintain the swords' commercial value as an antique. Consequently, the rest of the iron blade was left in the hilt as an iron tang. The junction of the blade and the guard was soldered and painted to match the patina color. XRF analysis clearly showed that the elemental Sn/Cu ratios of the blades and the hilts were different. These findings are useful for clarifying the later modifications of the swords and are important for interpreting Bronze Age and Iron Age history correctly.

An Influence of Ageing on the Structure, Corrosion Resistance and Hardness of High Aluminum ZnAl40Cu3 Alloy

Directory of Open Access Journals (Sweden)

Michalik R.

2016-03-01

Full Text Available Zn-Al-Cu alloys are used primarily because of their tribological properties as an alternative material for bronze, cast iron and aluminum alloy bearings and as a construction material. Particularly interesting are high aluminum zinc alloys. Monoeutectic zinc and aluminum alloys are characterized by the highest hardness, tensile strength and wear resistance of all of the zinc alloys. A significant problem with the use of the Zn-Al-Cu alloys is their insufficient resistance to electrochemical corrosion. Properties of Zn-Al-Cu alloys can be improved by heat treatment. The purpose of examination was to determine the effect of heat treatment (aging at various temperatures on the microstructure and corrosion resistance of the ZnAl40Cu3 alloy. The scope of the examination included: structural examinations, determination of hardness using Brinell’s method and corrosion resistance examinations. Ageing at higher temperatures causes a creation of areas where is an eutectoid mixture. The study showed that ageing causes a decrease in hardness of ZnAl40Cu3 alloy. This decrease is even greater, when the temperature of ageing is lower. The studies have shown a significant influence of ageing on the corrosion resistance of the alloy ZnAl40Cu3. Maximum corrosion resistance were characterized by the sample after ageing at higher temperatures.

Dating of Las Mesas Copper Age walled enclosure (La Fuente, Spain

Directory of Open Access Journals (Sweden)

Odriozola, Carlos P.

2014-12-01

Full Text Available The site of Las Mesas is located in the west bank of the Guadajira river (La Fuente, Badajoz, Spain. It covers a half hectare and is enclosed by a stone wall. Previous assessments based on site surveys suggested a general chronological span from Late Neolithic period (ca. 3600-2900 BC through the Copper Age (3rd millennium BC. Excavations revealed a well-constructed wall with bastions and a domestic space at the centre of the site with three occupational phases. Several functional areas and a votive pit are ascribed to the second phase. A deer antler located in a re-cut ritual pit associated to the second phase was dated by AMS-14C. Samples from a living floor assigned to the second phase (SU-9/10 and the basement of a kiln associated with the first phase (SU-18 was dated by optically stimulated luminescence (OSL using the single aliquot regenerative dose (SAR protocol on 90-160 m quartz grains. Luminescence profiling analysis of 7 samples taken throughout the archaeological stratigraphy was used to assess variations in luminescence behaviour and relative age through the sequence, using infrared-, optically –and thermally– stimulated luminescence (IRSL, OSL, TSL on poly-mineral and etched samples. Luminescence dating and profiling indicates that the upper archaeological layer (SU-1B probably dates to the Late Bronze Age (ca. 1000 BC, but that the sediments in the remainder of this section accumulated during the late Neolithic-Copper Age: the site was most probably inhabited between 3300 and 2900 BC. There were gaps in occupation between the Late Neolithic-Cooper Age phases (I & II, and between the Late Neolithic-Cooper Age phases and Late Bronze Age phase (II & III, indicating that the site was abandoned and reoccupied twice. The AMS-14C date on deer antler of 4254 ± 45 BP (3010-2675 cal BC is consisten with the OSL results for phase II, indicating that the pit was excavated at the beginning of the second occupational phase. Combined OSL

A piezoelectric micro generator worked at low frequency and high acceleration based on PZT and phosphor bronze bonding.

Science.gov (United States)

Tang, Gang; Yang, Bin; Hou, Cheng; Li, Guimiao; Liu, Jingquan; Chen, Xiang; Yang, Chunsheng

2016-12-08

Recently, piezoelectric energy harvesters (PEHs) have been paid a lot of attention by many researchers to convert mechanical energy into electrical and low level vibration. Currently, most of PEHs worked under high frequency and low level vibration. In this paper, we propose a micro cantilever generator based on the bonding of bulk PZT wafer and phosphor bronze, which is fabricated by MEMS technology, such as mechanical chemical thinning and etching. The experimental results show that the open-circuit output voltage, output power and power density of this fabricated prototype are 35 V, 321 μW and 8664 μW cm -3 at the resonant frequency of 100.8 Hz, respectively, when it matches an optimal loading resistance of 140 kΩ under the excitation of 3.0 g acceleration. The fabricated micro generator can obtain the open-circuit stable output voltage of 61.2 V when the vibration acceleration arrives at 7.0 g. Meanwhile, when this device is pasted on the vibrating vacuum pump, the output voltage is about 11 V. It demonstrates that this novel proposed device can scavenge high vibration level energy at low frequency for powering the inertial sensors in internet of things application.

Attraction of Male Nymphs to Adult Male Volatiles in the Bronze Bug Thaumastocoris peregrinus Carpintero & Dellape (Heteroptera: Thaumastocoridae).

Science.gov (United States)

Calvo, M V; Groba, H F; Martínez, G; Sellanes, C; Rossini, C; González, A

2017-12-23

The bronze bug, Thaumastocoris peregrinus Carpintero & Dellape (Heteroptera: Thaumastocoridae), is an exotic emerging pest in Eucalyptus commercial forests in South America, Africa and southern Europe. Information on the chemical communication system and reproductive ecology of this insect is scant, and it may be relevant for designing management strategies for eucalypt plantations. Adults and nymphs usually aggregate in the field, possibly by means of chemical signals. Males emit large amounts of 3-methyl-2-butenyl butyrate, which attracts conspecific adult males but not females. The ecological role of this putative male aggregation pheromone remains unknown. Here, we report olfactometer bioassays showing that late-instar male nymphs are also attracted to synthetic 3-methyl-2-butenyl butyrate and to adult male volatile extracts, which contain this compound as the major component. As previously shown for adult females, nymphs that moulted into females were not attracted to either volatile stimulus. The intra-gender attraction of nymphs and adults may be related to the exploitation of food resources, or as a reproductive strategy for newly emerged males. Further studies on the reproductive behaviour and mating system of T. peregrinus will contribute to understanding the ecological significance of male-male, adult-nymph attraction, as well as the practical applications that may result from these findings.

Zvířecí kosti ze středobronzové jámy ze Slaného (okr. Kladno)

Czech Academy of Sciences Publication Activity Database

Kyselý, René

2012-01-01

Roč. 2012, č. 3 (2012), s. 118-119 ISSN 1804-2953 Institutional research plan: CEZ:AV0Z80020508 Keywords : archaeozoology * osteology * Bronze Age * horse (Equus) Subject RIV: AC - Archeology, Anthropology, Ethnology

Loket pravěký - další indicie prehistorického osídlení loketského meandru řeky Ohře

Czech Academy of Sciences Publication Activity Database

Prekop, F.; Kočár, Petr

2016-01-01

Roč. 2016, č. 10 (2016), s. 45-54 ISSN 1804-2953 Institutional support: RVO:67985912 Keywords : Karlovy Vary Region * Late Bronze Age * archaeobotanical analysis * radiocarbon dating Subject RIV: AC - Archeology, Anthropology, Ethnology

Soft condensed matter: Polymers, complex fluids, and biomaterials

International Nuclear Information System (INIS)

Schaefer, D.

1995-01-01

Historians often characterize epochs through their dominant materials, clay, bronze, iron, and steel. From this perspective, the modern era is certainly the age of plastics. The progression from hard to soft materials suggests that the emerging era will be the age of open-quotes soft condensed matter.close quotes

L’utilizzo delle cavità naturali nella media età del Bronzo: nuovi dati dal Lazio meridionale

NARCIS (Netherlands)

Alessandri, Luca; Rolfo, Mario Federico

2016-01-01

Explorations conducted by speleological groups are a precious source of information on the use of natural caves in different periods, especially during the Metal Ages. Pottery shards dating from the Middle Bronze Age were recently found in southem Latium in the Caverna di San Pietro a Campea, the

Mass migration through soil exhaustion: Transformation of habitation patterns in the southern Netherlands (1000 BC-500 AD)

NARCIS (Netherlands)

Kluiving, S.J.; Bekkema, M.; Roymans, N.G.A.M.

2015-01-01

Long-term archaeological data gathering in the southern Netherlands may deliver an unprecedented regional comparison that could be exemplary for the Pleistocene sand areas of the Northwest European Plain. On a micro-scale level, it has become clear that Bronze Age (2000-800 BC) and Iron Age (800-12