WorldWideScience

Sample records for bromine ions

  1. Bromine

    Science.gov (United States)

    Ober, J.A.

    2013-01-01

    The element bromine is found principally as a dissolved species in seawater, evaporitic (salt) lakes and underground brines associated with petroleum deposits. Seawater contains about 65 parts per million of bromine or an estimated 907 Gt (100 trillion st). In the Middle East, the highly saline waters of the Dead Sea are estimated to contain 907 Mt (1 billion st) of bromine. Bromine also may be recovered from seawater as a coproduct during evaporation to produce salt.

  2. 40 CFR 180.519 - Bromide ion and residual bromine; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Bromide ion and residual bromine... Tolerances § 180.519 Bromide ion and residual bromine; tolerances for residues. (a) General. The food additives, bromide ion and residual bromine, may be present in water, potable in accordance with...

  3. Formation pathways of brominated products from benzophenone-4 chlorination in the presence of bromide ions

    Institute of Scientific and Technical Information of China (English)

    Ming Xiao; Dongbin Wei; Liping Li; Qi Liu; Huimin Zhao; Yuguo Du

    2014-01-01

    The brominated products,formed in chlorination treatment of benzophenone-4 in the presence of bromide ions,were identified,and the formation pathways were proposed.Under disinfection conditions,benzophenone-4 would undertake electrophilic substitution generating mono-or di-halogenated products,which would be oxidized to esters and further hydrolyzed to phenol derivatives.The generated catechol intermediate would be transformed into furan-like heterocyclic product.The product species were pH-dependent,while benzophenone-4 ehmination was chlorine dose-dependent.When the chlorination treatment was performed on ambient water spiked with benzophenone-4 and bromide ions,most of brominated byproducts could be detected,and the acute toxicity significantly increased as well.

  4. Experimental transition probabilities of intercombination transitions in Mg-like and Al-like ions of bromine

    International Nuclear Information System (INIS)

    Time-resolved extreme ultraviolet spectra of foil-excited 120-MeV Br ions have been recorded, using a spectrometer equipped with a position-sensitive detector. The spectra near λ=20--30 nm were measured at times after excitation of up to 6 ns. Prominent in the delayed spectra were the long-lived decays of the intercombination transitions in the Mg-like Br23+ and Al-like Br22+ ions. The present paper reports on lifetime measurements for intercombination transitions in highly charged bromine ions using such a position-sensitive detector

  5. A selected ion flow tube investigation of the positive ion chemistry of a number of bromine containing fully and partially halogenated hydrocarbons

    International Nuclear Information System (INIS)

    The reaction of ions with neutral molecules play a significant, and often dominant, role in the chemistry of many gaseous plasma environments, including the interstellar medium, planetary ionospheres and industrial plasmas. This had led to many publications reporting ion-molecule reaction rate coefficients and reaction pathways (product ion distributions). Such critical data are invaluable in the understanding of the formation and abundance of ions and neutral molecules present in neutral and man-made plasma, and to predict how such plasmas chemically and physically evolve. There have been many studies investigating the positive ion chemistry of chlorofluorocarbons (CFCs), and a number of studies have explored the positive ion chemistry of their replacements, the perfluorocarbones (PFCs). In part these studies have been undertaken because of their relevance to plasmas, and of more specific interest in terms of their relevance to industrial plasma processing. Halogenated molecules are commonly used in plasma processes. In contrast to fluorinated and/or chlorinated species, little attention has been directed to the reactions of positive ions with bromine containing molecules. Yet a systematic study of these reactions permits useful comparison with the ion chemistry of fully and partially fluorinated/chlorinated compounds. This in turn improves our fundamental understanding of ion-molecule reactions, and ultimately leads, for example, to better models to predict the optimum conditions needed to operate industrial plasma processes. In this paper the thermal biomolecular rate coefficients and product ion branching ratios for the reactions of the positive ions (in order of increasing recombination energy) H2O+, N2O+, O+, CO2+, CO+, N+, and N2+ with the bromine containing molecules CF3Br, CF2Br2, CFBr3, CF2BrCl, CFBr2Cl, CBrCl3, CH3Br, CH2Br2, CH2FBr, CHF2Br, CHFBr2, CH2BrCl, CHBrCl2, CHBr2Cl, CF3CF2Br, and CF2BrCF2Br at 300 K are reported. This represents the most

  6. Brominated Tyrosine and Polyelectrolyte Multilayer Analysis by Laser Desorption VUV Postionization and Secondary Ion Mass Spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    University of Illinois at Chicago; Blaze, Melvin M. T.; Takahashi, Lynelle; Zhou, Jia; Ahmed, Musahid; Gasper, Gerald; Pleticha, F. Douglas; Hanley, Luke

    2011-03-14

    The small molecular analyte 3,5-dibromotyrosine (Br2Y) and chitosan-alginate polyelectrolyte multilayers (PEM) with and without adsorbed Br2Y were analyzed by laser desorption postionization mass spectrometry (LDPI-MS). LDPI-MS using 7.87 eV laser and tunable 8 ? 12.5 eV synchrotron vacuum ultraviolet (VUV) radiation found that desorption of clusters from Br2Y films allowed detection by≤8 eV single photon ionization. Thermal desorption and electronic structure calculations determined the ionization energy of Br2Y to be ~;;8.3?0.1 eV and further indicated that the lower ionization energies of clusters permitted their detection at≤8 eV photon energies. However, single photon ionization could only detect Br2Y adsorbed within PEMs when using either higher photon energies or matrix addition to the sample. All samples were also analyzed by 25 keV Bi3 + secondary ion mass spectrometry (SIMS), with the negative ion spectra showing strong parent ion signal which complemented that observed by LDPI-MS. The negative ion SIMS depended strongly on the high electron affinity of this specific analyte and the analyte?s condensed phase environment.

  7. Bromine Safety

    Energy Technology Data Exchange (ETDEWEB)

    Meyers, B

    2001-04-09

    The production and handling in 1999 of about 200 million kilograms of bromine plus substantial derivatives thereof by Great Lakes Chemical Corp. and Albemarle Corporation in their southern Arkansas refineries gave OSHA Occupational Injury/Illness Rates (OIIR) in the range of 0.74 to 1.60 reportable OIIRs per 200,000 man hours. OIIRs for similar industries and a wide selection of other U.S. industries range from 1.6 to 23.9 in the most recent OSHA report. Occupational fatalities for the two companies in 1999 were zero compared to a range in the U.S.of zero for all computer manufacturing to 0.0445 percent for all of agriculture, forestry and fishing in the most recent OSHA report. These results show that bromine and its compounds can be considered as safe chemicals as a result of the bromine safety standards and practices at the two companies. The use of hydrobromic acid as an electrical energy storage medium in reversible PEM fuel cells is discussed. A study in 1979 of 20 megawatt halogen working fluid power plants by Oronzio de Nora Group found such energy to cost 2 to 2.5 times the prevailing base rate at that time. New conditions may reduce this relative cost. The energy storage aspect allows energy delivery at maximum demand times where the energy commands premium rates. The study also found marginal cost and performance advantages for hydrobromic acid over hydrochloric acid working fluid. Separate studies in the late 70s by General Electric also showed marginal performance advantages for hydrobromic acid.

  8. Bromination of Phenol

    Science.gov (United States)

    Talbot, Christopher

    2013-01-01

    This "Science note" examines the bromination of phenol, a reaction that is commonly taught at A-level and IB (International Baccalaureate) as an example of electrophilic substitution. Phenol undergoes bromination with bromine or bromine water at room temperature. A white precipitate of 2,4,6-tribromophenol is rapidly formed. This…

  9. Radiation effects on silicon bipolar transistors caused by 3-10 MeV protons and 20-60 MeV bromine ions

    Science.gov (United States)

    Li, Xingji; Geng, Hongbin; Lan, Mujie; Liu, Chaoming; Yang, Dezhuang; He, Shiyu

    2010-03-01

    The current gain degradation in silicon NPN bipolar junction transistors (BJTs) was examined under irradiation with 3-10 MeV protons and 20-60 MeV bromine (Br) ions with various dose levels. To characterize the radiation damage of the NPN BJTs, the ionizing dose D i and displacement dose D d as a function of chip depth in the NPN BJTs were calculated for both the protons and Br ions with different energies. Based on the irradiation testing and calculated results, it is shown that the current gain degradation of NPN BJTs is sensitive to the ratio of D d/( D d+ D i) in the sensitive region given by protons and Br ions. The irradiation particles (protons and Br ions), which give larger D d/( D d+ D i) at a given total dose, would generate more severe damage to the NPN BJTs. The reciprocal of the gain variation as a function of the displacement dose was compared, showing that the Messenger-Spratt equation becomes relevant to describe the experimental data, when the ratio of the D d/( D d+ D i) are larger and the displacement dose are higher than a certain value.

  10. New insight into photo-bromination processes in saline surface waters: The case of salicylic acid

    International Nuclear Information System (INIS)

    It was shown, through a combination of field and laboratory observations, that salicylic acid can undergo photo-bromination reactions in sunlit saline surface waters. Laboratory-scale experiments revealed that the photochemical yields of 5-bromosalicylic acid and 3,5-dibromosalicylic acid from salicylic acid were always low (in the 4% range at most). However, this might be of concern since these compounds are potential inhibitors of the 20α-hydroxysteroid dehydrogenase enzyme, with potential implications in endocrine disruption processes. At least two mechanisms were involved simultaneously to account for the photo-generation of brominated substances. The first one might involve the formation of reactive brominated radical species (Br·, Br2·−) through hydroxyl radical mediated oxidation of bromide ions. These ions reacted more selectively than hydroxyl radicals with electron-rich organic pollutants such as salicylic acid. The second one might involve the formation of hypobromous acid, through a two electron oxidation of bromine ions by peroxynitrite. This reaction was catalyzed by nitrite, since these ions play a crucial role in the formation of nitric oxide upon photolysis. This nitric oxide further reacts with superoxide radical anions to yield peroxynitrite and by ammonium through the formation of N-bromoamines, probably due to the ability of N-bromoamines to promote the aromatic bromination of phenolic compounds. Field measurements revealed the presence of salicylic acid together with 5-bromosalicylic and 3,5-dibromosalicylic acid in a brackish coastal lagoon, thus confirming the environmental significance of the proposed photochemically induced bromination pathways. -- Highlights: ► Brominated derivatives of salicylic acid were detected in a brackish lagoon. ► A photochemical pathway was hypothesized to account for bromination of salicylic acid. ► Radical bromine species are partly responsible for the bromination process. ► Hypobromous acid might

  11. The geochemistry of stable chlorine and bromine isotopes

    Energy Technology Data Exchange (ETDEWEB)

    Eggenkamp, Hans [Onderzock and Beleving, Bussum (Netherlands)

    2014-11-01

    First book solely dedicated to the geochemistry of chlorine and bromine isotopes. Detailed description of analytical techniques, including their advantages and disadvantages. Indication of research fields where measurement of these isotopes is especially useful. This book provides detailed information on the history, analysis and applications of chlorine and bromine isotope geochemistry. Chlorine and bromine are geochemically unique as they prefer to exist as single charged negative ions. For this reason isotope fractionation reflects mostly processes that are not related to changes in the redox state and this fractionation is generally modest. The book will describe the processes that are most easily detected using these isotopes. Also isotope variations, and processes that cause them, measured in oxidised species such as perchlorates and in organic molecules will be described in this book.

  12. Contribution to the study of X-ray emission induced by accelerated bromine and krypton ions and possibilities of analytical applications

    International Nuclear Information System (INIS)

    In view of analytical applications the X-ray emission induced by 3 to 85 MeV Br and Kr ions has been studied. Thick target yields have been measured and ionization cross section for K and L shells have been calculated. The X-ray emission rates and energy shifts have also been determined. The results are discussed in the frame of the actually existing models for inner shell ionization in atomic collisions. As a practical application azteque ceramics have been analyzed. The possibilities and the difficulties of the technic are emphasized

  13. New insight into photo-bromination processes in saline surface waters: The case of salicylic acid

    Energy Technology Data Exchange (ETDEWEB)

    Tamtam, Fatima; Chiron, Serge, E-mail: serge.chiron@msem.univ-montp2.fr

    2012-10-01

    It was shown, through a combination of field and laboratory observations, that salicylic acid can undergo photo-bromination reactions in sunlit saline surface waters. Laboratory-scale experiments revealed that the photochemical yields of 5-bromosalicylic acid and 3,5-dibromosalicylic acid from salicylic acid were always low (in the 4% range at most). However, this might be of concern since these compounds are potential inhibitors of the 20{alpha}-hydroxysteroid dehydrogenase enzyme, with potential implications in endocrine disruption processes. At least two mechanisms were involved simultaneously to account for the photo-generation of brominated substances. The first one might involve the formation of reactive brominated radical species (Br{center_dot}, Br{sub 2}{center_dot}{sup -}) through hydroxyl radical mediated oxidation of bromide ions. These ions reacted more selectively than hydroxyl radicals with electron-rich organic pollutants such as salicylic acid. The second one might involve the formation of hypobromous acid, through a two electron oxidation of bromine ions by peroxynitrite. This reaction was catalyzed by nitrite, since these ions play a crucial role in the formation of nitric oxide upon photolysis. This nitric oxide further reacts with superoxide radical anions to yield peroxynitrite and by ammonium through the formation of N-bromoamines, probably due to the ability of N-bromoamines to promote the aromatic bromination of phenolic compounds. Field measurements revealed the presence of salicylic acid together with 5-bromosalicylic and 3,5-dibromosalicylic acid in a brackish coastal lagoon, thus confirming the environmental significance of the proposed photochemically induced bromination pathways. -- Highlights: Black-Right-Pointing-Pointer Brominated derivatives of salicylic acid were detected in a brackish lagoon. Black-Right-Pointing-Pointer A photochemical pathway was hypothesized to account for bromination of salicylic acid. Black

  14. Characterization of unknown brominated disinfection byproducts during chlorination using ultrahigh resolution mass spectrometry.

    Science.gov (United States)

    Zhang, Haifeng; Zhang, Yahe; Shi, Quan; Zheng, Hongdie; Yang, Min

    2014-03-18

    Brominated disinfection byproducts (Br-DBPs), formed from the reaction of disinfectant(s) with natural organic matter in the presence of bromide in raw water, are generally more cytotoxic and genotoxic than their chlorinated analogues. To date, only a few Br-DBPs in drinking water have been identified, while a significant portion of Br-DBPs in drinking water is still unknown. In this study, negative ion electrospray ionization ultrahigh resolution Fourier transform ion cyclotron resonance mass spectrometry (ESI FT-ICR MS) was used to characterize unknown Br-DBPs in artificial drinking water. In total, 441 formulas for one-bromine-containing products and 37 formulas for two-bromine-containing products, most of which had not been previously reported, were detected in the chlorinated sample. Most Br-DBPs have corresponding chlorine-containing analogues with identical CHO composition. In addition, on-resonance collision-induced dissociation (CID) of single ultrahigh resolved bromine containing mass peaks was performed in the ICR cell to isolate single bromine-containing components in a very complex natural organic matter spectrum and provide structure information. Relatively abundant neutral loss of CO2 was observed in MS-MS spectra, indicating that the unknown Br-DBPs are rich in carboxyl groups. The results demonstrate that the ESI FT-ICR MS method could provide valuable molecular composition and structure information on unknown Br-DBPs.

  15. Two new brominated diterpenes from Laurencia decumbens

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Two new brominated diterpenes, namely, laurendecumtriol and 11-deacetylpinnaterpene C, were isolated and identified from the marine red alga Laurencia decumbens. Their structures were established on the basis of various NMR spectroscopic techniques and HR-ESI-MS analyses.

  16. Stability and metastability of bromine clathrate polymorphs.

    Science.gov (United States)

    Nguyen, Andrew H; Molinero, Valeria

    2013-05-23

    Clathrate hydrates are crystals in which water forms a network of fully hydrogen-bonded polyhedral cages that contain small guests. Clathrate hydrates occur mostly in two cubic crystal polymorphs, sI and sII. Bromine is one of two guests that yield a hydrate with the tetragonal structure (TS), the topological dual of the Frank-Kasper σ phase. There has been a long-standing disagreement on whether bromine hydrate also forms metastable sI and sII crystals. To date there are no data on the thermodynamic range of stability (e.g., the melting temperatures) of the metastable polymorphs. Here we use molecular dynamics simulations with the coarse-grained model of water mW to (i) investigate the thermodynamic stability of the empty and guest-filled the sI, sII, TS, and HS-I hydrate polymorphs, (ii) develop a coarse-grained model of bromine compatible with mW water, and (iii) evaluate the stability of the bromine hydrate polymorphs. The mW model predicts the same relative energy of the empty clathrate polymorphs and the same phase diagram as a function of water-guest interaction than the fully atomistic TIP4P water model. There is a narrow region in water-guest parameter space for which TS is marginally more stable than sI or sII. We parametrize a coarse-grained model of bromine compatible with mW water and use it to determine the order of stability of the bromine hydrate polymorphs. The melting temperatures of the bromine hydrate polymorphs predicted by the coarse-grained model are 281 ± 1 K for TS, 279 ± 1 K for sII, and 276 ± 1 K for sI. The closeness of the melting temperatures supports the plausibility of formation of metastable sII and sI bromine hydrates.

  17. A, a Brominated Flame Retardant

    Directory of Open Access Journals (Sweden)

    Tomomi Takeshita

    2013-01-01

    Full Text Available Tetrabromobisphenol A (TBBPA, a brominated flame retardant, has been found to exacerbate pneumonia in respiratory syncytial virus- (RSV- infected mice. We examined the effect of Brazilian propolis (AF-08 on the exacerbation of RSV infection by TBBPA exposure in mice. Mice were fed a powdered diet mixed with 1% TBBPA alone, 0.02% AF-08 alone, or 1% TBBPA and 0.02% AF-08 for four weeks and then intranasally infected with RSV. TBBPA exposure increased the pulmonary virus titer and level of IFN-γ, a representative marker of pneumonia due to RSV infection, in the lungs of infected mice without toxicity. AF-08 was significantly effective in reducing the virus titers and IFN-γ level increased by TBBPA exposure. Also, AF-08 significantly reduced proinflammatory cytokine (TNF-α and IL-6 levels in the lungs of RSV-infected mice with TBBPA exposure, but Th2 cytokine (IL-4 and IL-10 levels were not evidently increased. Neither TBBPA exposure nor AF-08 treatment affected the anti-RSV antibody production in RSV-infected mice. In flow cytometry analysis, AF-08 seemed to be effective in reducing the ratio of pulmonary CD8a+ cells in RSV-infected mice with TBBPA exposure. TBBPA and AF-08 did not exhibit anti-RSV activity in vitro. Thus, AF-08 probably ameliorated pneumonia exacerbated by TBBPA exposure in RSV-infected mice by limiting excess cellular immune responses.

  18. Abiotic Bromination of Soil Organic Matter.

    Science.gov (United States)

    Leri, Alessandra C; Ravel, Bruce

    2015-11-17

    Biogeochemical transformations of plant-derived soil organic matter (SOM) involve complex abiotic and microbially mediated reactions. One such reaction is halogenation, which occurs naturally in the soil environment and has been associated with enzymatic activity of decomposer organisms. Building on a recent finding that naturally produced organobromine is ubiquitous in SOM, we hypothesized that inorganic bromide could be subject to abiotic oxidations resulting in bromination of SOM. Through lab-based degradation treatments of plant material and soil humus, we have shown that abiotic bromination of particulate organic matter occurs in the presence of a range of inorganic oxidants, including hydrogen peroxide and assorted forms of ferric iron, producing both aliphatic and aromatic forms of organobromine. Bromination of oak and pine litter is limited primarily by bromide concentration. Fresh plant material is more susceptible to bromination than decayed litter and soil humus, due to a labile pool of mainly aliphatic compounds that break down during early stages of SOM formation. As the first evidence of abiotic bromination of particulate SOM, this study identifies a mechanistic source of the natural organobromine in humic substances and the soil organic horizon. Formation of organobromine through oxidative treatments of plant material also provides insights into the relative stability of aromatic and aliphatic components of SOM.

  19. 21 CFR 180.30 - Brominated vegetable oil.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Brominated vegetable oil. 180.30 Section 180.30... Brominated vegetable oil. The food additive brominated vegetable oil may be safely used in accordance with... used on an interim basis as a stabilizer for flavoring oils used in fruit-flavored beverages, for...

  20. 40 CFR 721.9740 - Brominated triazine derivative.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Brominated triazine derivative. 721... Substances § 721.9740 Brominated triazine derivative. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as a brominated triazine...

  1. Computer simulation of the cluster destruction of stratospheric ozone by bromine

    Institute of Scientific and Technical Information of China (English)

    A.E.Galashev; O.R.Rakhmanova

    2012-01-01

    The interaction of (Br-)i(H2O)50-i,0≤i≤6 clusters with oxygen and ozone molecules is investigated by the method of molecular dynamics simulation.The ozone molecules as well as the bromine ions do not leave the cluster during the calculation of 25 ps.The ability of the cluster containing molecular oxygen to absorb the infrared (IR)radiation is reduced in the frequency range of 0 ≤ ω ≤ 3500 cm-1 when the number of the bromine ions in the cluster grows.The intensity of the Raman spectrum is not changed significantly when the Br-ions are added to the ozonecontaining system.The power of the emitted IR radiation is increased when the number of bromine ions grows in the oxygen-containing system.The data obtained in this study on the IR and the Raman spectra of the water clusters that contain ozone,oxygen,and Br-can be used to develop an investigation of the mechanisms of ozone depletion.

  2. Computer simulation of the cluster destruction of stratospheric ozone by bromine

    International Nuclear Information System (INIS)

    The interaction of (Br−)i(H2O)50−i, 0 ≤ i ≤ 6 clusters with oxygen and ozone molecules is investigated by the method of molecular dynamics simulation. The ozone molecules as well as the bromine ions do not leave the cluster during the calculation of 25 ps. The ability of the cluster containing molecular oxygen to absorb the infrared (IR) radiation is reduced in the frequency range of 0 ≤ ω ≤ 3500 cm−1 when the number of the bromine ions in the cluster grows. The intensity of the Raman spectrum is not changed significantly when the Br− ions are added to the ozone-containing system. The power of the emitted IR radiation is increased when the number of bromine ions grows in the oxygen-containing system. The data obtained in this study on the IR and the Raman spectra of the water clusters that contain ozone, oxygen, and Br− can be used to develop an investigation of the mechanisms of ozone depletion

  3. Performance and Degradation of A Lithium-Bromine Rechargeable Fuel Cell Using Highly Concentrated Catholytes

    CERN Document Server

    Bai, Peng

    2016-01-01

    Lithium-air batteries have been considered as ultimate solutions for the power source of long-range electrified transportation, but state-of-the-art prototypes still suffer from short cycle life, low efficiency and poor power output. Here, a lithium-bromine rechargeable fuel cell using highly concentrated bromine catholytes is demonstrated with comparable specific energy, improved power density, and higher efficiency. The cell is similar in structure to a hybrid-electrolyte Li-air battery, where a lithium metal anode in nonaqueous electrolyte is separated from aqueous bromine catholytes by a lithium-ion conducting ceramic plate. The cell with a flat graphite electrode can discharge at a peak power density around 9mW cm-2 and in principle could provide a specific energy of 791.8 Wh kg-1, superior to most existing cathode materials and catholytes. It can also run in regenerative mode to recover the lithium metal anode and free bromine with 80-90% voltage efficiency, without any catalysts. Degradation of the sol...

  4. PHONONS IN GRAPHITE INTERCALATED WITH BROMINE

    OpenAIRE

    Batallan, F.; Rosenman, I.; Simon, C; Furdin, G.; Lauter, H.

    1981-01-01

    We have investigated the phonon spectrum in stage 2 graphite intercalate with bromine by using inelastic neutron scattering. We have observed longitudinal and transverse phonons along the c direction as well as in the layer plane. Results are presented for energies up to 15 THz at 300 K. A linear chain model explains most of our results.

  5. Brominated flame retardants and endocrine disruption

    NARCIS (Netherlands)

    Vos, J.G.; Becher, G.; Berg, van den M.; Boer, de J.; Leonards, P.E.G.

    2003-01-01

    From an environmental point of view, an increasing important group of organohalogen compounds are the brominated flame retardants (BFRs), which are widely used in polymers and textiles and applied in construction materials, furniture, and electronic equipment. BFRs with the highest production volume

  6. Bromination of selected pharmaceuticals in water matrices.

    Science.gov (United States)

    Benitez, F Javier; Acero, Juan L; Real, Francisco J; Roldan, Gloria; Casas, Francisco

    2011-11-01

    The bromination of five selected pharmaceuticals (metoprolol, naproxen, amoxicillin, phenacetin, and hydrochlorothiazide) was studied with these compounds individually dissolved in ultra-pure water. The apparent rate constants for the bromination reaction were determined as a function of the pH, obtaining the sequence amoxicillin>naproxen>hydrochlorothiazide≈phenacetin≈metoprolol. A kinetic mechanism specifying the dissociation reactions and the species formed for each compound according to its pK(a) value and the pH allowed the intrinsic rate constants to be determined for each elementary reaction. There was fairly good agreement between the experimental and calculated values of the apparent rate constants, confirming the goodness of the proposed reaction mechanism. In a second stage, the bromination of the selected pharmaceuticals simultaneously dissolved in three water matrices (a groundwater, a surface water from a public reservoir, and a secondary effluent from a WWTP) was investigated. The pharmaceutical elimination trend agreed with the previously determined rate constants. The influence of the main operating conditions (pH, initial bromine dose, and characteristics of the water matrix) on the degradation of the pharmaceuticals was established. An elimination concentration profile for each pharmaceutical in the water matrices was proposed based on the use of the previously evaluated apparent rate constants, and the theoretical results agreed satisfactorily with experiment. Finally, chlorination experiments performed in the presence of bromide showed that low bromide concentrations slightly accelerate the oxidation of the selected pharmaceuticals during chlorine disinfection.

  7. Iodine and bromine speciation in snow and the effect of orographically induced precipitation

    Directory of Open Access Journals (Sweden)

    H. Biester

    2007-05-01

    Full Text Available Iodine is an essential trace element for all mammals and may also influence climate through new aerosol formation. Atmospheric bromine cycling is also important due to its well-known ozone depletion capabilities. Despite precipitation being the ultimate source of iodine in the terrestrial environment, the processes effecting its distribution, speciation and transport are relatively unknown. The aim of this study was to determine the effect of orographically induced precipitation on iodine concentrations in snow and also to quantify the inorganic and organic iodine and bromine species. Snow samples were collected over an altitude profile (~840 m from the northern Black Forest and were analysed by ion-chromatography - inductively coupled plasma mass spectrometry (IC-ICP-MS for iodine and bromine species and trace metals (ICP-MS. All elements and species concentrations in snow showed significant (r2>0.65 exponential decrease relationships with altitude despite the short (5 km horizontal distance of the transect. In fact, total iodine more than halved (38 to 13 nmol/l over the 840 m height change. The results suggest that orographic lifting and subsequent precipitation has a major influence on iodine concentrations in snow. This orographically induced removal effect may be more important than lateral distance from the ocean in determining iodine concentrations in terrestrial precipitation. The microphysical removal process was common to all elements indicating that the iodine and bromine are internally mixed within the snow crystals. We also show that organically bound iodine is the dominant iodine species in snow (61–75%, followed by iodide. Iodate was only found in two samples despite a detection limit of 0.3 nmol/l. Two unknown but most likely anionic organo-I species were also identified in IC-ICP-MS chromatograms and comprised 2–10% of the total iodine. The majority of the bromine was inorganic bromide with a max. of 32% organo-Br.

  8. Symproportionation versus Disproportionation in Bromine Redox Systems

    International Nuclear Information System (INIS)

    Graphical abstract: Display Omitted -- Highlights: • The disproportionation and symproportionation of bromine in different media is presented. • All the redox systems are elaborated according to the principles of the generalized approach to electrolytic redox systems (GATES/GEB). • All physicochemical knowledge is involved in the algorithm applied for this purpose. • The graphical representation of the systems is the basis of gaining the detailed physicochemical knowledge on the systems in question. -- Abstract: The paper refers to dynamic (titration) redox systems where symproportionation or disproportionation of bromine species occur. The related systems are modeled according to principles assumed in the Generalized Approach to Electrolytic Redox Systems (GATES), with Generalized Electron Balance (GEB) concept involved in the GATES/GEB software. The results obtained from calculations made with use of iterative computer programs prepared according to MATLAB computational software, are presented graphically, as 2D and 3D graphs

  9. Membrane-less hydrogen bromine flow battery

    CERN Document Server

    Braff, W A; Buie, C R

    2014-01-01

    In order for the widely discussed benefits of flow batteries for electrochemical energy storage to be applied at large scale, the cost of the electrochemical stack must come down substantially. One promising avenue for reducing stack cost is to increase the system power density while maintaining efficiency, enabling smaller stacks. Here we report on a membrane-less, hydrogen bromine laminar flow battery as a potential high power density solution. The membrane-less design enables power densities of 0.795 W cm$^{-2}$ at room temperature and atmospheric pressure, with a round-trip voltage efficiency of 92\\% at 25\\% of peak power. Theoretical solutions are also presented to guide the design of future laminar flow batteries. The high power density achieved by the hydrogen bromine laminar flow battery, along with the potential for rechargeable operation, will translate into smaller, inexpensive systems that could revolutionize the fields of large-scale energy storage and portable power systems.

  10. Brominated thiophenes as precursors in the preparation of brominated and arylated anthraquinones.

    Science.gov (United States)

    Thiemann, Thies; Tanaka, Yasuko; Iniesta, Jesus

    2009-01-01

    Brominated anthraquinones can be synthesized directly from bromothiophenes when these are reacted with 1,4-naphthoquinones in the presence of meta-chloroperoxybenzoic acid. The bromoanthraquinones are versatile building blocks in the preparation of arylated anthraquinones and of extended pi-systems with interspersed anthraquinone units. PMID:19305356

  11. Brominated Thiophenes as Precursors in the Preparation of Brominated and Arylated Anthraquinones

    Directory of Open Access Journals (Sweden)

    Thies Thiemann

    2009-03-01

    Full Text Available Brominated anthraquinones can be synthesized directly from bromothiophenes when these are reacted with 1,4-naphthoquinones in the presence of meta-chloroperoxybenzoic acid. The bromoanthraquinones are versatile building blocks in the preparation of arylated anthraquinones and of extended π-systems with interspersed anthraquinone units.

  12. Brominated Thiophenes as Precursors in the Preparation of Brominated and Arylated Anthraquinones

    OpenAIRE

    Thies Thiemann; Jesus Iniesta; Yasuko Tanaka

    2009-01-01

    Brominated anthraquinones can be synthesized directly from bromothiophenes when these are reacted with 1,4-naphthoquinones in the presence of meta-chloroperoxybenzoic acid. The bromoanthraquinones are versatile building blocks in the preparation of arylated anthraquinones and of extended π-systems with interspersed anthraquinone units.

  13. Polyvinylpolypyrrolidone-bromine complex: Mild and efficient polymeric reagent for bromination of activated aromatic compounds

    Institute of Scientific and Technical Information of China (English)

    Masoud Mokhtary; Moslem M. Lakouraj

    2011-01-01

    Mild and efficient method for bromination of electron-rich aromatic compounds is described using polyvinylpolypyrrolidonebromine complex (PVPP-Br2). The reaction proceeded smoothly with phenols and N,N-alkylated amines to afford the corresponding monobrominated product in good yields at ambient temperature.

  14. Fire-retardant coatings based on organic bromine/phenoxy or brominated epoxy systems

    Energy Technology Data Exchange (ETDEWEB)

    Hoffman, D.M.; Chiu, Ing L.

    1989-06-01

    Thin phenoxy and brominated epoxy/curing agent films were prepared by solvent casting on Mylar and Kapton. Thicknesses were approximated assuming volume additivity. Important parameters were uniformity of thickness, distribution of the bromine-containing fire retardant, adhesion to carrier substrate (either Mylar or Kapton), and uniformity of the coating, i.e., absence of pinholes, blush, blistering, etc. Wetting behavior was modified using fluoro, silicone or polyurea surfactants. Several solvent systems were examined and a ternary solvent system was ultimately used. Distribution of fire-retardant bromine was analyzed using electron microprobe, x-ray fluorescence and wet chemical methods. Significant discrepancies in the /mu/m-scale analyses of the microprobe measurements have not been resolved. Some of the brominated fire retardants were insoluble in the resin systems and the phase separation was immediately obvious. Similarly, some of the crystallizable epoxies could not be cast easily into homogeneous, amorphous films. Castings were made on a standard 8'' /times/ 10'' aluminum vacuum plate polished with jeweler's rouge prior to every casting. Solvent was removed in a forced air or vacuum oven. Removal and/or curing was accelerated with temperature. The fire-retardant bromine was required to be stable in alcohol/salt solutions. Final formulation used after a significant amount of testing was phenoxy resin PKHC in a ternary solvent system composed of methylethyl ketone, cellosolve acetate and toluene. Tetrabromobisphenol A was used as the flame retardant with FC-430 as surfactant. The dying schedule was 30 minutes at 150/degree/C. 4 refs., 6 figs., 3 tabs.

  15. Formation of THMs and HANs during bromination of Microcystis aeruginosa

    Institute of Scientific and Technical Information of China (English)

    Yunzhu Pu; Lingzhao Kong; Xin Huang; Guoji Ding; Naiyun Gao

    2013-01-01

    Bromine-contained disinfectants and biocides are widely used in swimming pools,recreational waters and cooling towers.The objective of this study was to evaluate the formation of thrihalomethanes (THMs) and haloacetonitriles (HANs) and their cytotoxicity in algae solutions during free bromine disinfection.Disinfection by-products formation potential experiments were conducted using modelsolutions containing 7mg/L (as total organic carbon) Microcystis aeruginosa cells.Effects of free bromine dosage,pH and ammonia were investigated.The results showed that brominated disinfection by-products were the major products when free bromine was applied.The total THMs formed during bromination was much as that formed during chlorination,whereas HANs were elevated by using bromination instead of chlorination.Dibromoacetonitrice (C2H2NBr2) and bromoform (CHBr3) were the only detected species during free bromine disinfection.The production of C2H2NBr2 and CHBr3 increased with disinfectant dosage but decreased with dosing ammonia.CHBr3 increased with the pH changing from 5 to 9.However,C2H2NBr2 achieved the highest production at neutral pH,which was due to a joint effect of variation in hydrolysis rate and free bromine reactivity.The hydrolysis of C2H2NBr2 was basecatalytic and nearly unaffected by disinfectant.Finally,estimation of cytotoxicity of the disinfected algae solutions showed that HANs formation was responsible for the majority of toxicity.Considering its highest toxicity among the measured disinfection by-products,the elevated C2H2NBr2 should be considered when using bromine-related algaecide.

  16. New infrared spectroscopic database for bromine nitrate

    Science.gov (United States)

    Wagner, Georg; Birk, Manfred

    2016-08-01

    Fourier transform infrared measurements of bromine nitrate have been performed in the spectral region 675-1400 cm-1 at 0.014 cm-1 spectral resolution. Absorption cross sections were derived from 38 spectra covering the temperature range from 203 to 296 K and air pressure range from 0 to 190 mbar. For line-by-line analysis, further spectra were recorded at 0.00094 cm-1 spectral resolution at 223 and 293 K. The sample was synthesized from ClONO2 and Br2. Band strengths of the bands ν3 around 803 cm-1 and ν2 around 1286 cm-1 were determined from three pure BrONO2 measurements at different temperatures and pressures. Number densities in the absorption cell were derived from pressure measurements of the purified sample taking into account small amounts of impurities determined spectroscopically. Resulting band strengths are Sν3 = 2.872(52) × 10-17 cm2 molec-1 cm-1 and Sν2 = 3.63(15) × 10-17 cm2 molec-1 cm-1. Absorption cross sections of all measurements were scaled to these band strengths. Further data reduction was achieved with an interpolation scheme based on two-dimensional polynomials in ln(pressure) and temperature. The database is well-suited for remote-sensing application and should reduce the atmospheric bromine nitrate error budget substantially.

  17. Corrosion mechanism of 13Cr stainless steel in completion fluid of high temperature and high concentration bromine salt

    International Nuclear Information System (INIS)

    Highlights: • The corrosion behavior of 13Cr steel exposed to bromine salt completion fluid containing high concentration bromine ions was investigated. • There are passive circles around pits on the 13Cr steel surface after 7 d of exposure. • Macroscopic galvanic corrosion formed between the passive halo and the pit. • The mechanism of pitting corrosion on 13Cr stainless steel exposed to heavy bromine brine was established. - Abstract: A series of corrosion tests of 13Cr stainless steel were conducted in a simulated completion fluid environment of high temperature and high concentration bromine salt. Corrosion behavior of specimens and the component of corrosion products were investigated by means of scanning electron microscope (SEM), confocal laser scanning microscopy (CLSM) and X-ray photoelectron spectroscopy (XPS). The results indicate that 13Cr steel suffers from severe local corrosion and there is always a passive halo around every pit. The formation mechanism of the passive halo is established. OH− ligand generates and adsorbs in a certain scale because of abundant OH− on the surface around the pits. Passive film forms around each pit, which leads to the occurrence of passivation in a certain region. Finally, the dissimilarities in properties and morphologies of regions, namely the pit and its corresponding passive halo, can result in different corrosion sensitivities and may promote the formation of macroscopic galvanic pairs

  18. Corrosion mechanism of 13Cr stainless steel in completion fluid of high temperature and high concentration bromine salt

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Yan [Corrosion and Protection Center, Key Laboratory for Environmental Fracture (MOE), Institute for Advanced Materials and Technology, University of Science and Technology Beijing, Beijing 100083 (China); Xu, Lining, E-mail: xulining@ustb.edu.cn [Corrosion and Protection Center, Key Laboratory for Environmental Fracture (MOE), Institute for Advanced Materials and Technology, University of Science and Technology Beijing, Beijing 100083 (China); Lu, Minxu [Corrosion and Protection Center, Key Laboratory for Environmental Fracture (MOE), Institute for Advanced Materials and Technology, University of Science and Technology Beijing, Beijing 100083 (China); Meng, Yao [Beijing Institute of Aeronautical Materials, Beijing 100095 (China); Zhu, Jinyang; Zhang, Lei [Corrosion and Protection Center, Key Laboratory for Environmental Fracture (MOE), Institute for Advanced Materials and Technology, University of Science and Technology Beijing, Beijing 100083 (China)

    2014-09-30

    Highlights: • The corrosion behavior of 13Cr steel exposed to bromine salt completion fluid containing high concentration bromine ions was investigated. • There are passive circles around pits on the 13Cr steel surface after 7 d of exposure. • Macroscopic galvanic corrosion formed between the passive halo and the pit. • The mechanism of pitting corrosion on 13Cr stainless steel exposed to heavy bromine brine was established. - Abstract: A series of corrosion tests of 13Cr stainless steel were conducted in a simulated completion fluid environment of high temperature and high concentration bromine salt. Corrosion behavior of specimens and the component of corrosion products were investigated by means of scanning electron microscope (SEM), confocal laser scanning microscopy (CLSM) and X-ray photoelectron spectroscopy (XPS). The results indicate that 13Cr steel suffers from severe local corrosion and there is always a passive halo around every pit. The formation mechanism of the passive halo is established. OH{sup −} ligand generates and adsorbs in a certain scale because of abundant OH{sup −} on the surface around the pits. Passive film forms around each pit, which leads to the occurrence of passivation in a certain region. Finally, the dissimilarities in properties and morphologies of regions, namely the pit and its corresponding passive halo, can result in different corrosion sensitivities and may promote the formation of macroscopic galvanic pairs.

  19. Resistivity features in intercalated graphite compounds with bromine and iodine chloride in the region of structural phase transitions in the layer of intercalate

    International Nuclear Information System (INIS)

    In the paper anomalous changes of resistivity in graphite intercalated compounds with iodine chloride and bromine are investigated in the phase transition temperature interval. It is shown that these anomalies are caused by the change of carriers mobility in the phase transitional interval as well as by the origin of ''mobile ions liquids''

  20. Use of Bromine and Bromo-Organic Compounds in Organic Synthesis.

    Science.gov (United States)

    Saikia, Indranirekha; Borah, Arun Jyoti; Phukan, Prodeep

    2016-06-22

    Bromination is one of the most important transformations in organic synthesis and can be carried out using bromine and many other bromo compounds. Use of molecular bromine in organic synthesis is well-known. However, due to the hazardous nature of bromine, enormous growth has been witnessed in the past several decades for the development of solid bromine carriers. This review outlines the use of bromine and different bromo-organic compounds in organic synthesis. The applications of bromine, a total of 107 bromo-organic compounds, 11 other brominating agents, and a few natural bromine sources were incorporated. The scope of these reagents for various organic transformations such as bromination, cohalogenation, oxidation, cyclization, ring-opening reactions, substitution, rearrangement, hydrolysis, catalysis, etc. has been described briefly to highlight important aspects of the bromo-organic compounds in organic synthesis.

  1. Bromine content and brominated flame retardants in food and animal feed from the UK.

    Science.gov (United States)

    Fernandes, A R; Mortimer, D; Rose, M; Smith, F; Panton, S; Garcia-Lopez, M

    2016-05-01

    Current occurrence data for polybrominated diphenyl ethers (PBDE) and hexa-bromocyclododecane (HBCD) measured in most commonly consumed foods (n = 156) and animal feeds (n = 51) sampled in the UK, demonstrates an ongoing ubiquity of these contaminants in human and animal diets. PBDE concentrations for the sum of 17 measured congeners ranged from 0.02 ng/g to 8.91 ng/g whole weight for food, and 0.11 ng/g to 9.63 ng/g whole weight for animal feeds. The highest concentration ranges, and mean values were detected in fish, processed foods and fish feeds. HBCD diastereomers (alpha-HBCD was the most commonly detected) generally occurred at lower concentrations (from animal feed) and less frequently than PBDEs, but tetrabromobisphenol A which was also measured, was rarely detected. The total bromine content of the samples was also determined in an attempt to use a mass balance approach to investigate some of these samples for the occurrence of novel and emerging BFRs. Although the approach was further refined by measuring organic bromine content, the concentrations of bromine were too high (in most cases by orders of magnitude) to allow use of the approach. A selected sub-set of samples was screened by GC-MS, for the presence of novel/emerging brominated flame retardants (PBT, TBX, PBEB, DBHCTD, HCTBPH and OBTMPI) but these were not detected at the higher limits of detection that result from full scan (GC-MS) screening. This data will contribute to the EU wide risk assessment on these contaminants.

  2. Ruthenium-Catalyzed meta-Selective C—H Bromination

    Science.gov (United States)

    Teskey, Christopher J; Lui, Andrew Y W; Greaney, Michael F

    2015-01-01

    The first example of a transition-metal-catalyzed, meta-selective C–H bromination procedure is reported. In the presence of catalytic [{Ru(p-cymene)Cl2}2], tetrabutylammonium tribromide can be used to functionalize the meta C–H bond of 2-phenylpyridine derivatives, thus affording difficult to access products which are highly predisposed to further derivatization. We demonstrate this utility with one-pot bromination/arylation and bromination/alkenylation procedures to deliver meta-arylated and meta-alkenylated products, respectively, in a single step. PMID:26288217

  3. Ruthenium-Catalyzed meta-Selective C—H Bromination

    OpenAIRE

    Teskey, Christopher J; Lui, Andrew Y W; Greaney, Michael F.

    2015-01-01

    The first example of a transition-metal-catalyzed, meta-selective C–H bromination procedure is reported. In the presence of catalytic [{Ru(p-cymene)Cl2}2], tetrabutylammonium tribromide can be used to functionalize the meta C–H bond of 2-phenylpyridine derivatives, thus affording difficult to access products which are highly predisposed to further derivatization. We demonstrate this utility with one-pot bromination/arylation and bromination/alkenylation procedures to deliver meta-arylated and...

  4. Magnetic Trapping of Cold Bromine Atoms

    CERN Document Server

    Rennick, C J; Doherty, W G; Softley, T P

    2014-01-01

    Magnetic trapping of bromine atoms at temperatures in the milliKelvin regime is demonstrated for the first time. The atoms are produced by photodissociation of Br$_2$ molecules in a molecular beam. The lab-frame velocity of Br atoms is controlled by the wavelength and polarization of the photodissociation laser. Careful selection of the wavelength results in one of the pair of atoms having sufficient velocity to exactly cancel that of the parent molecule, and it remains stationary in the lab frame. A trap is formed at the null point between two opposing neodymium permanent magnets. Dissociation of molecules at the field minimum results in the slowest fraction of photofragments remaining trapped. After the ballistic escape of the fastest atoms, the trapped slow atoms are only lost by elastic collisions with the chamber background gas. The measured loss rate is consistent with estimates of the total cross section for only those collisions transferring sufficient kinetic energy to overcome the trapping potential...

  5. The metabolism and de-bromination of bromotyrosine in vivo

    NARCIS (Netherlands)

    A.R. Mani (Ali); J.C. Moreno (José C.); T.J. Visser (Theo J.); K.P. Moore (Kevin P.)

    2016-01-01

    textabstractDuring inflammation, leukocyte-derived eosinophil peroxidase catalyses the formation of hypobromous acid, which can brominate tyrosine residues in proteins to form bromotyrosine. Since eosinophils are involved in the pathogenesis of allergic reactions, such as asthma, urinary bromotyrosi

  6. Chemistry of recoil atoms of bromine-82 in neutron-irradiated crystalline perbromates of the alkali metals and ammonium

    Energy Technology Data Exchange (ETDEWEB)

    Gavrilov, V.V.; Isupov, V.K.; Kirin, I.S.

    1975-01-01

    It was established by ion exchange chromatography that the recoil atoms of bromine-82 in perbromates with thermal neutrons are stabilized in the form of five valence forms: BrO/sub 4//sup -/, BrO/sub 3//sup -/, BrO/sub 2//sup -/, BrO/sup -/, Br/sup -/. The retention of bromine-82 of BrO/sub 4//sup -/ is 2.1 +- 0.4 percent for LiBrO/sub 4/, 2.1 +- 0.4 percent for NaBrO/sub 4/, 2.3 +- 0.4 percent for KBrO/sub 4/, 2.6 +- 0.4 percent for RbBrO/sub 4/, 2.2 +- 0.4 percent for CsBrO/sub 4/, and 1.6 +- 0.4 percent for NH/sub 4/BrO/sub 4/.

  7. Analysis of Small Ions with Capillary Electrophoresis.

    Science.gov (United States)

    Aulakh, Jatinder Singh; Kaur, Ramandeep; Malik, Ashok Kumar

    2016-01-01

    Small inorganic ions are easily separated through capillary electrophoresis because they have a high charge-to-mass ratio and suffer little from some of the undesired phenomenon affecting higher molecular weight species like adsorption to the capillary wall, decomposition, and precipitation. This chapter is focused on the analysis of small ions other than metal ions using capillary electrophoresis. Methods are described for the determination of ions of nitrogen, phosphorus, sulfur, fluorine, chlorine, bromine, and iodine. PMID:27645739

  8. Probing the tropical tropopause layer for organic and inorganic bromine

    Science.gov (United States)

    Werner, Bodo; Pfeilsticker, Klaus; Atlas, Elliot; Cheung, Ross; Chipperfield, Martyn; Colosimo, Fedele; Deutschmann, Tim; Elkins, Jim; Fahey, David; Feng, Wu; Festa, James; Gao, Ru-Shan; Hossaini, Ryan; Navarro, Maria; Raecke, Rasmus; Scalone, Lisa; Spolaor, Max; Thornberry, Troy; Tsai, Catalina; Stutz, Jochen

    2016-04-01

    Bromine chemistry impacts the levels of ozone in the upper troposphere and the stratosphere. An accurate quantitative understanding of the sources, sinks, and chemical transformation of bromine species is thus important to understand the photochemistry and budget of bromine in the tropical upper troposphere, tropopause layer and lowermost stratosphere (UT/TTL/LS). These regions are also known to serve as a gateway for delivery of ozone depleting gases to the stratosphere. CH3Br, halons, short-lived organic bromine precursors (VSLS), such as CHBr3, CH2Br2, and possibly inorganic product gases have been identified as the main bromine gases delivered to the stratosphere. However, many important details of the transport and delivery of VSLS and inorganic bromine compounds through the TTL are still uncertain. Moreover, a number of chemical processes, including the transformation of the source gases and cycling of inorganic bromine species at low ambient temperature and on ice particles are also poorly understood. The presentation reports measurements of CH4, O3, NO2, and BrO performed by different instruments and techniques during the 2013 NASA-ATTREX flights in the TTL and LS. The interpretation of our measurements is supported by chemical transport model (SLIMCAT) simulations. SLIMCAT results, in conjunction with extensive radiative transfer calculations using the Monte Carlo model McArtim, also are used to improve retrieval of O3, NO2, and BrO concentrations from limb scattered sunlight measurements made with the Differential Optical Absorption Spectroscopy (DOAS) technique during ATTREX. The chemical transport model also allows us to attribute observed concentration variations to transport and to photochemical processes. When properly accounting for the transport-related concentration variations in methane and ozone, we find that measured BrO mostly agrees with model simulations. An exception are regions where the contribution of the short-lived CH2Br2 or the

  9. Bromine pretreated chitosan for adsorption of lead (II) from water

    Indian Academy of Sciences (India)

    Rajendra Dongre; Minakshi Thakur; Dinesh Ghugal; Jostna Meshram

    2012-10-01

    Pollution by heavy metals like lead (II) is responsible for health hazards and environmental degradation. Adsorption is a prevalent method applied for removal of heavy metal pollutants from water. This study explored adsorption performances of 30% bromine pretreated chitosan for lead (II) abatement from water. Bromine pretreatment alters porosity and specific surface area of chitosan by means of physicochemical interaction with cationic sites of chitosan skeleton, besides imparting anionic alteration at amino linkages of chitosan, to remove lead (II) by chemical interactions on superfluous active sites as characterized by FTIR, SEM, DTA and elemental analysis. Lead adsorptions were studied in batch mode by varying parameters viz. pH, bromine loading, sorbent dosage, initial lead concentration, contact time and temperature. The adsorption equilibrium data was well fitted to Freundlich isotherm and maximum sorption capacity of 30% bromine pretreated chitosan sorbent was 1.755 g/kg with 85–90% lead removal efficiency. Though cost and applicability of sorbent is unproven, yet contrast to raw chitosan derivatives, activated carbons and some resins, 30% bromine pretreated chitosan endow benign and efficient lead abatement technique.

  10. Levels and trends of brominated flame retardants in the European environment

    NARCIS (Netherlands)

    Law, R.J.; Allchin, C.R.; Boer, de J.; Covaci, A.; Herzke, D.; Lepom, P.; Morris, S.; Tronczynski, J.; Wit, de C.A.

    2006-01-01

    In this paper, we review those data which have recently become available for brominated flame retardants (particularly the brominated diphenyl ethers (BDEs) and hexabromocyclododecane (HBCD)) in samples from the European environment. Environmental compartments studied comprise the atmosphere, sedime

  11. Environmental monitoring of brominated flame retardants

    Science.gov (United States)

    Vagula, Mary C.; Kubeldis, Nathan; Nelatury, Charles F.

    2011-06-01

    Brominated flame retardants (BFRs) are synthetic organobromide compounds which inhibit ignition and combustion processes. Because of their immense ability to retard fire and save life and property, they have been extensively used in many products such as TVs, computers, foam, plastics etc. The five major classes of BFRs are tetrabromobisphenol-A (TBBPA), hexabromocyclododecane (HBCD), pentabromodiphenyl ether, octabromodiphenyl ether, and decabromodiphenyl ether. The last three are also commonly called PBDEs. BDE-85 and BDE-209 are the two prominent congeners of PBDEs and this study reports the adverse effects of these congeners in rodents. Exposure of rat sciatic nerves to 5 μg/mL and 20 μg/mL of BDE-85 and BDE-209 respectively lead to significant, concentration dependent reduction in nerve conduction function. Glucose absorption in the rat intestinal segments exposed to 5 μg/mL of BDE-85 and BDE-209 was significantly reduced for both the compounds tested. Lastly, mice when exposed to 0.25 mg/kg body weight for four days showed a disruption in oxidant and antioxidant equilibrium. The tissues namely liver and brain have shown increase in the levels of lipid hydroperoxides indicating oxidative stress. Moreover, all the protective enzymes namely superoxide dismutase (SOD), glutathione peroxidase (GPx), catalase, and glutathione S transferase (GST) have shown tissue specific alterations indicating the induction of damaging oxidative stress and setting in of lipid peroxidation in exposed animals. The results indicate monitoring of PBDEs in the environment is essential because levels as low as 5 μg/mL and 0.25 mg/kg body weight were able to cause damage to the functions of rodents.

  12. Formation potentials of bromate and brominated disinfection by-products in bromide-containing water by ozonation.

    Science.gov (United States)

    Lin, Tao; Wu, Shouke; Chen, Wei

    2014-12-01

    The ozonation involved in drinking water treatment raises issues of water quality security when the raw water contains bromide (Br(-)). Br(-) ions may be converted to bromate (BrO3 (-)) during ozonation and some brominated disinfection by-products (Br-DBPs) in the following chlorination. In this study, the effects of ozone (O3) dosage, contact time, pH, and Br(-) and ammonia (NH3-N) concentrations on the formation of BrO3 (-) and Br-DBPs have been investigated. The results show that decreasing the initial Br(-) concentration is an effective means of controlling the formation of BrO3 (-). When the concentration of Br(-) was lower than 100 μg/L, by keeping the ratio of O3 dosage to dissolved organic carbon (DOC) concentration at less than 1, BrO3 (-) production was effectively suppressed. The concentration of BrO3 (-) steadily increased with increasing O3 dosage at high Br(-) concentration (>900 μg/L). Additionally, a longer ozonation time increased the concentrations of BrO3 (-) and total organic bromine (TOBr), while it had less impact on the formation potentials of brominated trihalomethanes (Br-THMFP) and haloacetic acids (Br-HAAFP). Higher pH value and the presence of ammonia may lead to an increase in the formation potential of BrO3 (-) and Br-DBPs.

  13. Determination of total chlorine and bromine in solid wastes by sintering and inductively coupled plasma-sector field mass spectrometry.

    Science.gov (United States)

    Osterlund, Heléne; Rodushkin, Ilia; Ylinenjärvi, Karin; Baxter, Douglas C

    2009-04-01

    A sample preparation method based on sintering, followed by analysis by inductively coupled plasma-sector field mass spectrometry (ICP-SFMS) for the simultaneous determination of chloride and bromide in diverse and mixed solid wastes, has been evaluated. Samples and reference materials of known composition were mixed with a sintering agent containing Na(2)CO(3) and ZnO and placed in an oven at 560 degrees C for 1h. After cooling, the residues were leached with water prior to a cation-exchange assisted clean-up. Alternatively, a simple microwave-assisted digestion using only nitric acid was applied for comparison. Thereafter the samples were prepared for quantitative analysis by ICP-SFMS. The sintering method was evaluated by analysis of certified reference materials (CRMs) and by comparison with US EPA Method 5050 and ion chromatography with good agreement. Median RSDs for the sintering method were determined to 10% for both chlorine and bromine, and median recovery to 96% and 97%, respectively. Limits of detection (LODs) were 200mg/kg for chlorine and 20mg/kg for bromine. It was concluded that the sintering method is suitable for chlorine and bromine determination in several matrices like sewage sludge, plastics, and edible waste, as well as for waste mixtures. The sintering method was also applied for determination of other elements present in anionic forms, such as sulfur, arsenic, selenium and iodine. PMID:19091539

  14. Novel analytical approach for brominated flame retardants based on the use of gas chromatography-atmospheric pressure chemical ionization-tandem mass spectrometry with emphasis in highly brominated congeners.

    Science.gov (United States)

    Portolés, Tania; Sales, Carlos; Gómara, Belén; Sancho, Juan Vicente; Beltrán, Joaquim; Herrero, Laura; González, María José; Hernández, Félix

    2015-10-01

    The analysis of brominated flame retardants (BFRs) commonly relies on the use of gas chromatography coupled to mass spectrometry (GC-MS) operating in electron ionization (EI) and electron capture negative ionization (ECNI) modes using quadrupole, triple quadrupole, ion trap, and magnetic sector analyzers. However, these brominated contaminants are examples of compounds for which a soft and robust ionization technique might be favorable since they show high fragmentation in EI and low specificity in ECNI. In addition, the low limits of quantification (0.01 ng/g) required by European Commission Recommendation 2014/118/EU on the monitoring of traces of BFRs in food put stress on the use of highly sensitive techniques/methods. In this work, a new approach for the extremely sensitive determination of BFRs taking profit of the potential of atmospheric pressure chemical ionization (APCI) combined with GC and triple quadrupole (QqQ) mass analyzer is proposed. The objective was to explore the potential of this approach for the BFRs determination in samples at pg/g levels, taking marine samples and a cream sample as a model. Ionization and fragmentation behavior of 14 PBDEs (congeners 28, 47, 66, 85, 99, 100, 153, 154, 183, 184, 191, 196, 197, and 209) and two novel BFRs, decabromodiphenyl ethane (DBDPE) and 1,2-bis(2,4,6-tribromophenoxy)ethane (BTBPE), in the GC-APCI-MS system has been investigated. The formation of highly abundant (quasi) molecular ion was the main advantage observed in relation to EI. Thus, a notable improvement in sensitivity and specificity was observed when using it as precursor ion in tandem MS. The improved detectability (LODs < 10 fg) achieved when using APCI compared to EI has been demonstrated, which is especially relevant for highly brominated congeners. Analysis of samples from an intercomparison exercise and samples from the marine field showed the potential of this approach for the reliable identification and quantification at very low

  15. Formation of brominated disinfection byproducts from natural organic matter isolates and model compounds in a sulfate radical-based oxidation process

    KAUST Repository

    Wang, Yuru

    2014-12-16

    A sulfate radical-based advanced oxidation process (SR-AOP) has received increasing application interest for the removal of water/wastewater contaminants. However, limited knowledge is available on its side effects. This study investigated the side effects in terms of the production of total organic bromine (TOBr) and brominated disinfection byproducts (Br-DBPs) in the presence of bromide ion and organic matter in water. Sulfate radical was generated by heterogeneous catalytic activation of peroxymonosulfate. Isolated natural organic matter (NOM) fractions as well as low molecular weight (LMW) compounds were used as model organic matter. Considerable amounts of TOBr were produced by SR-AOP, where bromoform (TBM) and dibromoacetic acid (DBAA) were identified as dominant Br-DBPs. In general, SR-AOP favored the formation of DBAA, which is quite distinct from bromination with HOBr/OBr- (more TBM production). SR-AOP experimental results indicate that bromine incorporation is distributed among both hydrophobic and hydrophilic NOM fractions. Studies on model precursors reveal that LMW acids are reactive TBM precursors (citric acid > succinic acid > pyruvic acid > maleic acid). High DBAA formation from citric acid, aspartic acid, and asparagine was observed; meanwhile aspartic acid and asparagine were the major precursors of dibromoacetonitrile and dibromoacetamide, respectively.

  16. Discovery of zinc, selenium, bromine, and neodymium isotopes

    International Nuclear Information System (INIS)

    Currently, thirty-two zinc, thirty-two selenium, twenty-nine bromine, and thirty-one neodymium isotopes have been observed and the discovery of these isotopes is described here. For each isotope a brief synopsis of the first refereed publication, including the production and identification method, is presented.

  17. Thymol bromination: a comparison between enzymatic and chemical catalysis

    NARCIS (Netherlands)

    F. Sabuzi; E. Churakova; P. Galloni; R. Wever; F. Hollmann; B. Floris; V. Conte

    2015-01-01

    The catalytic activity of the vanadium-dependent bromoperoxidase isolated from the brown alga Ascophyllum nodosum is compared with the activity of a cheap, commercially available V-catalyst precursor in the bromination of thymol. Organic solvents have been avoided to make the system appealing from a

  18. Bromine provides new weapons to combat mercury emissions

    Energy Technology Data Exchange (ETDEWEB)

    Hardtke, W. [Albermarle Europe (Germany)

    2011-04-15

    Brominated powdered activated carbon has been demonstrated to capture over 90% of mercury emissions from coal fired plants, operating at high temperatures and capturing the metal in concrete-friendly, non-leaching forms to help tackle a rising global health threat. 6 refs., 5 figs.

  19. Brominated Dioxins: Little-Known New Health Hazards - A Review

    Directory of Open Access Journals (Sweden)

    Piskorska-Pliszczyńska Jadwiga

    2014-10-01

    Full Text Available This article reviews the present state of the science concerning the polybrominated dibenzo-p-dioxins (PBDDs and dibenzofurans (PBDFs. Everywhere in the world people are exposed to anthropogenic origin chemicals. Some of them are long-lived organic compounds, which persist over the years in the environment. Persistent organic pollutants, such as organohalogen compounds, accumulate in environmental and biological compartments and have adverse effects on the health of humans and animals. Little is known about the brominated and mixed chloro/bromo dioxin and furans. Existing literature suggests that brominated dioxins and furans have similar toxicity profiles to their chlorinated analogues. The exposure data are extremely limited, showing a major data gap in estimating the potential environmental and health risk of these chemicals. The rapid increase in the use of brominated flame retardants (the main source of these pollutants has raised the level of concern over environmental and health damage from brominated dioxins and furans. It is likely that human as well as wildlife exposure to these contaminants will increase with their greater use. The findings reported here present strong evidence of the PBDDs and PBDFs as an emerging new class of contaminants.

  20. Discovery of Zinc, Selenium, Bromine, and Neodymium Isotopes

    OpenAIRE

    J.L. Gross; Claes, J.; Kathawa, J.; Thoennessen, M

    2010-01-01

    Currently, thirty-two zinc, thirty-two selenium, twenty-nine bromine and thirty-one neodymium isotopes have been observed and the discovery of these isotopes is discussed here. For each isotope a brief synopsis of the first refereed publication, including the production and identification method, is presented.

  1. Airborne measurements of organic bromine compounds in the Pacific tropical tropopause layer.

    Science.gov (United States)

    Navarro, Maria A; Atlas, Elliot L; Saiz-Lopez, Alfonso; Rodriguez-Lloveras, Xavier; Kinnison, Douglas E; Lamarque, Jean-Francois; Tilmes, Simone; Filus, Michal; Harris, Neil R P; Meneguz, Elena; Ashfold, Matthew J; Manning, Alistair J; Cuevas, Carlos A; Schauffler, Sue M; Donets, Valeria

    2015-11-10

    Very short-lived brominated substances (VSLBr) are an important source of stratospheric bromine, an effective ozone destruction catalyst. However, the accurate estimation of the organic and inorganic partitioning of bromine and the input to the stratosphere remains uncertain. Here, we report near-tropopause measurements of organic brominated substances found over the tropical Pacific during the NASA Airborne Tropical Tropopause Experiment campaigns. We combine aircraft observations and a chemistry-climate model to quantify the total bromine loading injected to the stratosphere. Surprisingly, despite differences in vertical transport between the Eastern and Western Pacific, VSLBr (organic + inorganic) contribute approximately similar amounts of bromine [∼6 (4-9) parts per trillion] [corrected] to the stratospheric input at the tropical tropopause. These levels of bromine cause substantial ozone depletion in the lower stratosphere, and any increases in future abundances (e.g., as a result of aquaculture) will lead to larger depletions. PMID:26504212

  2. Kinetics and mechanism of the oxidation of some -hydroxy acids by hexamethylenetetramine-bromine

    Indian Academy of Sciences (India)

    Dimple Garg; Seema Kothari

    2004-11-01

    The oxidation of lactic acid, mandelic acid and ten monosubstituted mandelic acids by hexamethylenetetramine-bromine (HABR) in glacial acetic acid, leads to the formation of the corresponding oxoacid. The reaction is first order with respect to each of the hydroxy acids and HABR. It is proposed that HABR itself is the reactive oxidizing species. The oxidation of -deuteriomandelic acid exhibits the presence of a substantial kinetic isotope effect (/ = 5.91 at 298 K). The rates of oxidation of the substituted mandelic acids show excellent correlation with Brown’s + values. The reaction constants are negative. The oxidation exhibits an extensive cross conjugation between the electron-donating substituent and the reaction centre in the transition state. A mechanism involving transfer of a hydride ion from the acid to the oxidant is postulated.

  3. Bromine measurements in ozone depleted air over the Arctic Ocean

    Directory of Open Access Journals (Sweden)

    J. A. Neuman

    2010-07-01

    Full Text Available In situ measurements of ozone, photochemically active bromine compounds, and other trace gases over the Arctic Ocean in April 2008 are used to examine the chemistry and geographical extent of ozone depletion in the arctic marine boundary layer (MBL. Data were obtained from the NOAA WP-3D aircraft during the Aerosol, Radiation, and Cloud Processes affecting Arctic Climate (ARCPAC study and the NASA DC-8 aircraft during the Arctic Research of the Composition of the Troposphere from Aircraft and Satellites (ARCTAS study. Fast (1 s and sensitive (detection limits at the low pptv level measurements of BrCl and BrO were obtained from three different chemical ionization mass spectrometer (CIMS instruments, and soluble bromide was measured with a mist chamber. The CIMS instruments also detected Br2. Subsequent laboratory studies showed that HOBr rapidly converts to Br2 on the Teflon instrument inlets. This detected Br2 is identified as active bromine and represents a lower limit of the sum HOBr + Br2. The measured active bromine is shown to likely be HOBr during daytime flights in the arctic. In the MBL over the Arctic Ocean, soluble bromide and active bromine were consistently elevated and ozone was depleted. Ozone depletion and active bromine enhancement were confined to the MBL that was capped by a temperature inversion at 200–500 m altitude. In ozone-depleted air, BrO rarely exceeded 10 pptv and was always substantially lower than soluble bromide that was as high as 40 pptv. BrCl was rarely enhanced above the 2 pptv detection limit, either in the MBL, over Alaska, or in the arctic free troposphere.

  4. Occurrence of bromine in fluidised bed combustion of solid recovered fuel

    Energy Technology Data Exchange (ETDEWEB)

    Vainikka, P.

    2011-12-15

    Corrosive ash species are the single most important factor limiting the electric efficiency of steam boiler plants fired with waste or biomass. Chlorine has been found to have a central role in the chemistry involved as it reduces the melting temperature of ash, forms corrosive vapour and gas species in the furnace and halogenated deposits on boiler heat transfer surfaces. In this context chlorine has been extensively researched. At the time of writing this thesis there was hardly any published data available on the occurrence of bromine (Br) in the aforementioned context. The objective of this work was to review the occurrence of bromine in solid fuels and characterise the behaviour of bromine in full-scale fluidised bed combustion. The review on the occurrence of bromine in solid fuels revealed that in anthropogenic wastes bromine is mainly found in connection to flame retarded substances. Several weight percentages of bromine can be found in plastics treated with brominated flame retardants (BFRs). Bromine is typically found some 100-200 mg kg-1 in mixed municipal solid wastes (MSW). Bromine may be enriched in fuels with high share of plastics, such as solid recovered fuel (SRF) or refuse derived fuel (RDF). Up to 2000 mg kg-1 was found as a monthly average in SRF, typical levels being 20-200 mg kg-1. Wastewater sludge from paper mills may contain bromine 20-100 mg kg-1 due the use of bromine based biocides. In other fuels bromine may be found in significant amounts in marine influenced coal deposits and peat as well as in biomass treated with brominated pesticides. In the experimental part SRF, spruce bark and wastewater sludge from a paper mill were co-fired in a full- scale bubbling fluidised bed (BFB) boiler, and the collected fuels, aerosols and waterwall deposits were analysed with the focus on the fate of bromine. Bromine was mainly found to form water soluble high vapour pressure alkali metal halides in the furnace - in the form of KBr(g) and NaBr(g) as

  5. 海水提溴技术的发展与研究现状%Research and development status of bromine extracting technique from sea water

    Institute of Scientific and Technical Information of China (English)

    林源; 王浩宇; 周亚蓉; 叶俊伟; 宁桂玲

    2012-01-01

    Bromine is one of the important chemical materials.lt has been widely used in the fields of flame retardants,oil exploration,fungicides,pesticides, photographic materials,and pharmaceutical etc..Bromine's preparation technology and potential value are highly attached by domestic and foreign scholars.The status of bromine production and extraction methods from sea water,including air stripping method,steam distillation method,ion exchange adsorption method,and membrane separation method at home and abroad were briefly introduced.The advantages and disadvantages of those methods were compared.Meanwhile, the preparation method of ultrapure bromine was briefly described.Finally, the future development direction of extracting bromine from sea water was suggested.%溴素是重要的化工原料之一,在阻燃剂、石油开采、杀菌剂、农药、感光材料及医药等领域广泛应用,其制备技术和应用价值受到国内外学者的高度重视.综述了国内外溴素生产现状和海水提溴的方法,介绍了空气吹出法、水蒸气蒸馏法、离子交换吸附法和膜分离法提溴技术的研究现状,分析了各种方法的优缺点.简述了超纯溴的制备方法.提出了海水提溴的未来发展方向.

  6. Determination of chlorine, fluorine, bromine, and iodine in coals with ICP-MS and IC

    Energy Technology Data Exchange (ETDEWEB)

    Bettinelli, M.; Spezia, S.; Minoia, C.; Ronchi, A. [Salvatore Maugeri Foundation, Pavia (Italy)

    2002-07-01

    The combustion process releases many organic and inorganic pollutants into the atmosphere, both in gaseous and solid form. During coal combustion in thermal power plants without pollution control equipment, chlorine, fluorine, bromine, and iodine present in coals are mainly volatilized as gaseous compounds. Limiting pollutant emissions is a precise requirement of the Italian legislation that fixes (in the case of power plants) 100 mg/Nm{sup 3} as the limit value for chlorine, and 5 mg/Nm{sup 3} for fluorine and bromine (expressed as hydrofluoric and hydrobromic acid respectively). No limit for iodine emissions has been established. From this point of view and in order to maintain control of emissions from combustion plants, it is important to monitor the concentration of halogens in fuels. Unfortunately, in literature there are very few data published with regard to the amount of halogens in fossil fuels, which emphasizes the analytical difficulties with regard to the determination of these analytes. In the present paper a, pyrohydrolysis of the sample at 1100{degree}C, followed by the absorption of volatilized compounds in Na{sub 2}CO{sub 3}/NaHCO{sub 3} solution and the final instrumental analysis of Cl, Br, and F with ion chromatography (IC) and Br and I with inductively coupled plasma mass spectrometry (ICP-MS) has been adopted. The accuracy of the method, evaluated by analyzing some certified reference materials, was better than 95% for all analytes and the detection limits adequate to the analytical requirements (0.1 mg/kg for Br and I, 1 mg/kg for F, and 10 mg/kg for C1).

  7. Stereoselective Chlorination and Bromination of Enamides and Enamines via an Electrostatic Attraction Effect Using (1,1-Diacetoxyiodo)benzene and a Halide Source.

    Science.gov (United States)

    Xing, Linlin; Li, Chunbao

    2015-10-16

    The direct chlorination and bromination of (E)-enamines and (Z)-enamides to the corresponding (Z)-configurated α-chloroenamines, α-bromoenamines, and α-chloroenamides have been realized using NiCl2·6H2O or tetrabutyl ammonium bromide as a halide source and (1,1-diacetoxyiodo)benzene as an oxidant. The high stereoselective reactions which produce products with only (Z)-configurations can be attributed to the structure of the intermediates, the conformations of which are controlled by the electrostatic attractions between the positively charged nitrogen atoms and the oxygen atoms of the carbonyl group. This type of electrostatic effect has never been reported in olefin halogenations. For this reason, the three-membered bromonium ion is only a minor intermediate in the enamine bromination pathway. These methods open pathways to prepare α-chloroenamines and α-chloroenamides, which are not accessible via the currently used methods. PMID:26421836

  8. Bromination of hydrocarbons with CBr4, initiated by light-emitting diode irradiation

    Directory of Open Access Journals (Sweden)

    Yuta Nishina

    2013-08-01

    Full Text Available The bromination of hydrocarbons with CBr4 as a bromine source, induced by light-emitting diode (LED irradiation, has been developed. Monobromides were synthesized with high efficiency without the need for any additives, catalysts, heating, or inert conditions. Action and absorption spectra suggest that CBr4 absorbs light to give active species for the bromination. The generation of CHBr3 was confirmed by NMR spectroscopy and GC–MS spectrometry analysis, indicating that the present bromination involves the homolytic cleavage of a C–Br bond in CBr4 followed by radical abstraction of a hydrogen atom from a hydrocarbon.

  9. High selectively oxidative bromination of toluene derivatives by the H2O2-HBr system

    Institute of Scientific and Technical Information of China (English)

    Jie Ju; Yu Jin Li; Jian Rong Gao; Jian Hong Jia; Liang Han; Wei Jian Sheng; Yi Xia Jia

    2011-01-01

    An aqueous solution of hydrogen peroxide and hydrogen bromide illuminated by a 60 W incandescent light bulb serves as a source of bromine radicals. Various substituted toluenes (NO2,Cl, Br, H, CH3) were high selectively brominated at the benzyl position for monobromination in CH2C12 at ice water with catalyst free. This simple but effective bromination of toluene derivatives with an aqueous H2O2-HBr system is characterized with the use of inexpensive reagents and a lower impact on the environment, which make it a good alternative to the existing bromination methods.

  10. Elemental Bromine Production by TiO2 Photocatalysis and/or Ozonation.

    Science.gov (United States)

    Parrino, Francesco; Camera Roda, Giovanni; Loddo, Vittorio; Palmisano, Leonardo

    2016-08-22

    Significant production of elemental bromine (Br2 ) was observed for the first time when treating bromide containing solutions at acidic pH, with TiO2 photocatalyst, ozone, or a combination thereof. Br2 selectivities up to approximately 85 % were obtained and the corresponding bromine mass balance values satisfied. The process is general and may be applied at a laboratory scale for green bromination reactions, or industrially as a cheap, safe, and environmentally sustainable alternative to the currently applied bromine production methods.

  11. Specific heat of pristine and brominated graphite fibers, composites and HOPG. [Highly Oriented Pyrolytic Graphite

    Science.gov (United States)

    Hung, Ching-Chen; Maciag, Carolyn

    1987-01-01

    Differential scanning calorimetry was used to obtain specific heat values of pristine and brominated P-100 graphite fibers and brominated P-100/epoxy composite as well as pristine and brominated highly oriented pyrolytic graphite (HOPG) for comparison. Based on the experimental results obtained, specific heat values are calculated for several different temperatures, with a standard deviation estimated at 1.4 percent of the average values. The data presented here are useful in designing heat transfer devices (such as airplane de-icing heaters) from bromine fibers.

  12. Measurement-based modeling of bromine chemistry in the boundary layer: 1. Bromine chemistry at the Dead Sea

    OpenAIRE

    Tas, E.; Peleg, M.; D. U. Pedersen; Matveev, V; Pour Biazar, A.; Luria, M.

    2006-01-01

    International audience The Dead Sea is an excellent natural laboratory for the investigation of Reactive Bromine Species (RBS) chemistry, due to the high RBS levels observed in this area, combined with anthropogenic air pollutants up to several ppb. The present study investigated the basic chemical mechanism of RBS at the Dead Sea using a numerical one-dimensional chemical model. Simulations were based on data obtained from comprehensive measurements performed at sites along the Dead Sea. ...

  13. Inorganic bromine in the marine boundary layer: a critical review

    Directory of Open Access Journals (Sweden)

    R. Sander

    2003-06-01

    Full Text Available The cycling of inorganic bromine in the marine boundary layer (mbl has received increased attention in recent years. Bromide, a constituent of sea water, is injected into the atmosphere in association with sea-salt aerosol by breaking waves on the ocean surface. Measurements reveal that supermicrometer sea-salt aerosol is depleted in bromine by about 50% relative to conservative tracers, whereas marine submicrometer aerosol is often enriched in bromine. Model calculations, laboratory studies, and field observations strongly suggest that these depletions reflect the chemical transformation of particulate bromide to reactive inorganic gases that influence the processing of ozone and other important constituents of marine air. However, currently available techniques cannot reliably quantify many chem{Br}-containing compounds at ambient concentrations and, consequently, our understanding of inorganic Br cycling over the oceans and its global significance are uncertain. To provide a more coherent framework for future research, we have reviewed measurements in marine aerosol, the gas phase, and in rain. We also summarize sources and sinks, as well as model and laboratory studies of chemical transformations. The focus is on inorganic bromine over the open oceans, excluding the polar regions. The generation of sea-salt aerosol at the ocean surface is the major tropospheric source producing about 6.2 Tg/a of bromide. The transport of  Br from continents (as mineral aerosol, and as products from biomass-burning and fossil-fuel combustion can be of local importance. Transport of degradation products of long-lived Br-containing compounds from the stratosphere and other sources contribute lesser amounts. Available evidence suggests that, following aerosol acidification, sea-salt bromide reacts to form Br2 and BrCl that volatilize to the gas phase and photolyze in daylight to produce atomic Br and Cl. Subsequent transformations can destroy

  14. Study on Modes of Occurrence of Bromine in Coals Using Sequential Chemical Extraction Procedure%逐级化学提取法研究煤中溴的赋存状态

    Institute of Scientific and Technical Information of China (English)

    彭炳先; 吴代赦; 李萍

    2011-01-01

    采用逐级化学提取法研究了煤中溴的赋存状态,用电感耦合等离子体质谱(ICP—MS)测定了煤及各种提取状态中溴的含量.结果表明,来自四川和重庆的8个煤中溴主要以水溶态、离子交换态、碳酸盐结合态、铁锰结合态和有机态存在,平均总提取率为88.2%.对于烟煤和无烟煤,前者有机态溴的相对量大于后者,平均值分别为22.3%和20.0%;而碳酸盐结合态溴小于后者,相对量分别为14.0%和19.2%;两者水溶态溴和铁锰结合态溴的相对量几乎相等.煤中离子交换态溴可能以有机质吸附为主,溴的各种赋存形态的相对量与其成煤时沉积环境%Modes of occurrence of bromine in eight coals from Sichuan and Chongqing were studied using inductively coupled plasma spectrometry and sequential chemical extraction. The results showed that the bromine mainly occur the water-soluble, ion exchangeable, carbonate, Fe-Mn oxides and organic fraction in these coals, which average total extraction rate was 88.2%. In bituminous coal and anthracite, the mean relative amount was 22.3% and 20.0% for organic bromine, 14.0% and 19.2% for the bromine of carbonate bound and almost equal for the bromine from water soluble and Fe-Mn oxidizes. The ion exchangeable bromine may be mainly adsorbed to organic matter in these coals. The relative amount of bromine in various modes of occurrence may not be very closely related to its sedimentary environment during the formation of coal. Bromine in coals from Sichuan and Chongqing should be paid more attention because its potential leachable rate was 36. 62%-86. 80% and potential leachable content was 7. 092-20. 10 μg/g.

  15. 40 CFR 721.775 - Brominated aromatic com-pound (generic name).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Brominated aromatic com-pound (generic name). 721.775 Section 721.775 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Specific Chemical Substances § 721.775 Brominated aromatic com-pound (generic name). (a)...

  16. Visible-light photoredox catalysis enabled bromination of phenols and alkenes

    Directory of Open Access Journals (Sweden)

    Yating Zhao

    2014-03-01

    Full Text Available A mild and efficient methodology for the bromination of phenols and alkenes has been developed utilizing visible light-induced photoredox catalysis. The bromine was generated in situ from the oxidation of Br− by Ru(bpy33+, both of which resulted from the oxidative quenching process.

  17. The Evolution of a Green Chemistry Laboratory Experiment: Greener Brominations of Stilbene

    Science.gov (United States)

    McKenzie, Lallie C.; Huffman, Lauren M.; Hutchison, James E.

    2005-01-01

    The use of green metrics to compare three bromination laboratory procedures demonstrates the effectiveness of an incremental greening process for chemistry curricula. Due to this process, the bromination of alkenes can be introduced to students through the use of a safe, effective, modern practice.

  18. Accurate measurement of bromine contents in plastic samples by instrumental neutron activation analysis.

    Science.gov (United States)

    Kim, I J; Lee, K S; Hwang, E; Min, H S; Yim, Y H

    2013-03-26

    Accurate measurements of bromine contents in plastic samples were made by the direct comparator instrumental neutron activation analysis (INAA). Individual factors affecting the measurements were comprehensively evaluated and compensated, including the volatility loss of bromine from standard comparators, the background bromine level in the filter papers used for preparation of the standard comparators, nuclear interference, γ-ray spectral interference and the variance among replicates of the samples. Uncertainty contributions from those factors were thoroughly evaluated and included in the uncertainty budgeting of the INAA measurement. (81)Br was chosen as the target isotope, and the INAA measurements for bromine were experimentally confirmed to exhibit good linearity within a bromine content range of 10-170 μg. The established method has been applied to the analysis of eight plastic samples: four commercially available certified reference materials (CRMs) of polyethylene and polystyrene and four acrylonitrile butadiene styrene (ABS) samples prepared as the candidate reference materials (KRISS CRM 113-01-012, -013, -014 and -015). The bromine contents of the samples were calculated at three different γ-ray energies and compared, showing good agreement. The results of the four CRMs also showed good consistency with their certified values within the stated uncertainties. Finally, the bromine contents of the ABS samples were determined with expanded uncertainties (at a 95% level of confidence) between 2.5% and 5% in a bromine content range of 25-900 mg kg(-1). PMID:23498117

  19. The Cyclotron Production and Nuclear Imaging of BROMINE-77.

    Science.gov (United States)

    Galiano, Eduardo

    In this investigation, bromine-77 was produced with a medical cyclotron and imaged with gamma cameras. Br -77 emits a 240 kev photon with a half life of 56 hours. The C-Br bond is stronger than the C-I bond and bromine is not collected in the thyroid. Bromine can be used to label many organic molecules by methods analogous to radioiodination. The only North American source of Br-77 in the 70's and 80's was Los Alamos National Laboratory, but it discontinued production in 1989. In this method, a p,3n reaction on Br-77 produces Kr-77 which decays with a 1.2 hour half life to Br-77. A cyclotron generated 40 MeV proton beam is incident on a nearly saturated NaBr or LiBr solution contained in a copper or titanium target. A cooling chamber through which helium gas is flowed separates the solution from the cyclotron beam line. Helium gas is also flowed through the solution to extract Kr-77 gas. The mixture flows through a nitrogen trap where Kr-77 freezes and is allowed to decay to Br-77. Eight production runs were performed, three with a copper target and five with a titanium target with yields of 40, 104, 180, 679, 1080, 685, 762 and 118 uCi respectively. Gamma ray spectroscopy has shown the product to be very pure, however corrosion has been a major obstacle, causing the premature retirement of the copper target. Phantom and in-vivo rat nuclear images, and an autoradiograph in a rat are presented. The quality of the nuclear scans is reasonable and the autoradiograph reveals high isotope uptake in the renal parenchyma, a more moderate but uniform uptake in pulmonary and hepatic tissue, and low soft tissue uptake. There is no isotope uptake in the brain or the gastric mucosa.

  20. Preparation of bromine-77 labeled proteins using bromoperoxidase

    Energy Technology Data Exchange (ETDEWEB)

    Lambert, F.; Slegers, G. (Ghent Univ. (Belgium). Lab. of Radiopharmacy)

    1994-01-01

    The halogenating enzyme bromoperoxidase, isolated from the brown algae Ascophyllum nodosum, was used to catalyze the radiobromination of an anti-hPLAP monoclonal antibody. Radiobromination of bovine serum albumin was also performed and used as control method. The proteins are labeled with bromine-77, produced by the [sup 75]As ([alpha], 2n) [sup 77]Br reaction. The essential reaction parameters, such as concentration of protein and hydrogen peroxide, the amount of bromoperoxidase, the pH of the reaction mixture, the reaction time and temperature were optimized. The immunoreactivity of the radiolabeled monoclonal antibody was checked with a ''Sandwich'' ELISA. (author).

  1. Future chlorine-bromine loading and ozone depletion

    Science.gov (United States)

    Prather, Michael J.; Ibrahim, Abdel Moneim; Sasaki, Toru; Stordal, Frode; Visconti, Guido

    1991-01-01

    The prediction of future ozone requires three elements: (1) a scenario for the net emissions of chemically and radiatively active trace gases from the land and oceans; (2) a global atmospheric model that projects the accumulation of these gases; and (3) a chemical transport model that describes the distribution of ozone for a prescribed atmospheric composition and climate. This chapter, of necessity, presents models for all three elements and focuses on the following: (1) atmospheric abundance of chlorine and bromine in the form of halocarbons; and (2) the associated perturbations to stratospheric ozone.

  2. Labeling of receptor ligands with bromine radionuclides. Progress report, March 1, 1981-February 28, 1982

    International Nuclear Information System (INIS)

    In recent years there has been an interest in the use of various radioisotopes of bromine as labels for radiopharmaceuticals. Although radioisotopes of iodine have been used extensively as radiopharmaceutical labels, there are several advantages associated with the use of radiobromine as a label, due primarily to increased stability of bonds to the radiohalide and smaller steric perturbation resulting from substitution of the radiohalide. Methods of attaching radiobromine to receptor ligands with the potential of mapping estrogen receptors in mammary tumors and uteri were studied. Two ligands were studied extensively in vitro and in animal models; preliminary studies were also carried out in humans. To date, the only radioisotope of bromine used was bromine-77. In addition, a series of model compounds were labeled with bromine-77 using a recently described method for rapid bromination; the scope and limitations of this new rapid radiobromination technique were evaluated

  3. Ultraviolet/Ozone as a Tool To Control Grafting Density in Surface-Initiated Controlled-Radical Polymerizations via Ablation of Bromine.

    Science.gov (United States)

    Sheridan, Richard J; Orski, Sara V; Muramoto, Shin; Stafford, Christopher M; Beers, Kathryn L

    2016-08-16

    We used an ultraviolet-ozone (UVO) cleaner to create substrates for atom-transfer radical polymerization (ATRP) with varying surface initiator coverage. We collected complementary time-of-flight secondary ion mass spectrometry (ToF-SIMS) and X-ray photoelectron spectroscopy (XPS) measurements to investigate the precise chemical origin of the variation in grafting density. At short exposure times, the atomic composition underwent minor changes except for the relative amount of bromine. At longer UVO exposure times, there is clear evidence of exposure-dependent surface initiator oxidation. We interpret these data as evidence of a bromine ablation process within the UVO cleaner, with additional oxidative modification of the rest of the surface. We then used these substrates to create a series of poly(methyl methacrylate) (PMMA) brushes varying in grafting density, demonstrating the utility of this tool for the control of polymer brush density. The measured brush grafting densities were correlated with the bromine concentration measured by both ToF-SIMS and XPS. XPS and brush thicknesses correlated strongly, following an exponential decay with a half-life of 18 ± 1 s. PMID:27442615

  4. Effect of bromine substituents in the formation of PXDD from poly halogenated phenols

    Energy Technology Data Exchange (ETDEWEB)

    Sakurai, T.; Ohono, T.; Weber, R.

    2002-07-01

    The condensation of chlorophenols has been studied extensively in the last two decades and was discussed as one mechanism in particular for the formation of PCDD in thermal processes. Brominated flame retardants and brominated and brominated-chlorinated dibenzodioxins and dibenzofurans have received increased attention recently due to the growing use of brominated flame retardants during the last decade. This is resulting than increase of brominated compounds in waste (e.g. Electric and electronic shredder waste), containing a considerable amount of bromine, in the form of brominated flame retardants. Many studies reported on the formation of PBDD/PBDF from brominated diphenylethers, or bromophenosl. However with the exception of Sodhu et al, a comparison of the condensation behaviour of bromophenols and chlorophenols was not done. The condensation of brominated phenols is interesting from several aspects. Bromophenols are used as flame retardants and might be a source of PBDD/F during thermal stress. Bromophenols can also be generated during the combustion/pyrolysis of bromodiphenylether or tetrabromobisphenol A containing material, serving as potential precursors for the formation of PBDD/PBDF. Further, in municipal waste incinerators with sufficient secondary combustion, the largest amount of chlorinated aromatic compounds (PCDD, PCDF, PCBs, PCNs, and chlorophenols) are formed in the cooling section (boiler, duct, dust filtration). Therefore in combustion processes involving high concentrations of brominated flame retardants, mixed PXDD/PXDF might be formed by condensation reactions of precursors or de novo synthesis in the cooling zone. Therefore we investigated the condensation of abrominated phenol in more detail and compare it to the condensation reaction of the analogous chlorophenol. (Author)

  5. Algae form brominated organic compounds in surface waters

    Energy Technology Data Exchange (ETDEWEB)

    Huetteroth, A.; Putschew, A.; Jekel, M. [Tech. Univ. Berlin (Germany)

    2004-09-15

    Monitoring of organic halogen compounds, measured as adsorbable organic bromine (AOBr) revealed seasonal high concentrations of organic bromine compounds in a surface water (Lake Tegel, Berlin, Germany). Usually, in late summer, concentrations are up to five times higher than during the rest of the year. The AOBr of the lake inflows (throughout the year less then 6 {mu}g/L) were always lower then those in the lake, which indicates a production of AOBr in the lake. A correlation of the AOBr and chlorophyll-a concentration (1) in the lake provides first evidence for the influence of phototrophic organisms. The knowledge of the natural production of organohalogens is relatively recent. Up to now there are more then 3800 identified natural organohalogen compounds that have been detected in marine plants, animals, and bacteria and also in terrestrial plants, fungi, lichen, bacteria, insects, some higher animals, and humans. Halogenated organic compounds are commonly considered to be of anthropogenic origin; derived from e.g. pharmaceuticals, herbicides, fungicides, insecticides, flame retardants, intermediates in organic synthesis and solvents. Additionally they are also produced as by-products during industrial processes and by waste water and drinking water disinfection. Organohalogen compounds may be toxic, persistent and/or carcinogenic. In order to understand the source and environmental relevance of naturally produced organobromine compounds in surface waters, the mechanism of the formation was investigated using batch tests with lake water and algae cultures.

  6. Comparative environmental analysis of waste brominated plastic thermal treatments

    International Nuclear Information System (INIS)

    The aim of this research activity is to investigate the environmental impact of different thermal treatments of waste electric and electronic equipment (WEEE), applying a life cycle assessment methodology. Two scenarios were assessed, which both allow the recovery of bromine: (A) the co-combustion of WEEE and green waste in a municipal solid waste combustion plant, and (B) the staged-gasification of WEEE and combustion of produced syngas in gas turbines. Mass and energy balances on the two scenarios were set and the analysis of the life cycle inventory and the life cycle impact assessment were conducted. Two impact assessment methods (Ecoindicator 99 and Impact 2002+) were slightly modified and then used with both scenarios. The results showed that scenario B (staged-gasification) had a potentially smaller environmental impact than scenario A (co-combustion). In particular, the thermal treatment of staged-gasification was more energy efficient than co-combustion, and therefore scenario B performed better than scenario A, mainly in the impact categories of 'fossil fuels' and 'climate change'. Moreover, the results showed that scenario B allows a higher recovery of bromine than scenario A; however, Br recovery leads to environmental benefits for both the scenarios. Finally the study demonstrates that WEEE thermal treatment for energy and matter recovery is an eco-efficient way to dispose of this kind of waste

  7. Maternal exposure to brominated flame retardants and infant Apgar scores.

    Science.gov (United States)

    Terrell, Metrecia L; Hartnett, Kathleen P; Lim, Hyeyeun; Wirth, Julie; Marcus, Michele

    2015-01-01

    Brominated flame retardants (BFRs) and other persistent organic pollutants have been associated with adverse health outcomes in humans and may be particularly toxic to the developing fetus. We investigated the association between in utero polybrominated biphenyl (PBB) and polychlorinated biphenyl (PCB) exposures and infant Apgar scores in a cohort of Michigan residents exposed to PBB through contaminated food after an industrial accident. PBB and PCB concentrations were measured in serum at the time the women were enrolled in the cohort. PBB concentrations were also estimated at the time of conception for each pregnancy using a validated elimination model. Apgar scores, a universal measure of infant health at birth, measured at 1 and 5min, were taken from birth certificates for 613 offspring born to 330 women. Maternal PCB concentrations at enrollment were not associated with below-median Apgar scores in this cohort. However, maternal PBB exposure was associated with a dose-related increase in the odds of a below-median Apgar score at 1min and 5min. Among infants whose mothers had an estimated PBB at conception above the limit of detection of 1 part per billion (ppb) to Apgar score increased with higher maternal PBB at conception. It remains critical that future studies examine possible relationships between in utero exposures to brominated compounds and adverse health outcomes.

  8. Pulse radiolysis studies of the reactions of bromine atoms and dimethyl sulfoxide-bromine atom complexes with alcohols

    International Nuclear Information System (INIS)

    Dimethylsulfoxide (DMSO)-Br complexes were generated by pulse radiolysis of DMSO/bromomethane mixtures and the formation mechanism and spectral characteristics of the formed complexes were investigated in detail. The rate constant for the reaction of bromine atoms with DMSO and the extinction coefficient of the complex were obtained to be 4.6x109 M-1 s-1 and 6300 M-1 cm-1 at the absorption maximum of 430 nm. Rate constants for the reaction of bromine atoms with a series of alcohols were determined in CBrCl3 solutions applying a competitive kinetic method using the DMSO-Br complex as the reference system. The obtained rate constants were ∼108 M-1 s-1, one or two orders larger than those reported for highly polar solvents. Rate constants of DMSO-Br complexes with alcohols were determined to be ∼ 107 M-1 s-1. A comparison of the reactivities of Br atoms and DMSO-Br complexes with those of chlorine atoms and chlorine atom complexes which are ascribed to hydrogen abstracting reactants strongly indicates that hydrogen abstraction from alcohols is not the rate determining step in the case of Br atoms and DMSO-Br complexes

  9. Simple and rapid quantification of brominated vegetable oil in commercial soft drinks by LC-MS.

    Science.gov (United States)

    Chitranshi, Priyanka; Gamboa da Costa, Gonçalo

    2016-12-15

    We report here a simple and rapid method for the quantification of brominated vegetable oil (BVO) in soft drinks based upon liquid chromatography-electrospray ionization mass spectrometry. Unlike previously reported methods, this novel method does not require hydrolysis, extraction or derivatization steps, but rather a simple "dilute and shoot" sample preparation. The quantification is conducted by mass spectrometry in selected ion recording mode and a single point standard addition procedure. The method was validated in the range of 5-25μg/mL BVO, encompassing the legal limit of 15μg/mL established by the US FDA for fruit-flavored beverages in the US market. The method was characterized by excellent intra- and inter-assay accuracy (97.3-103.4%) and very low imprecision [0.5-3.6% (RSD)]. The direct nature of the quantification, simplicity, and excellent statistical performance of this methodology constitute clear advantages in relation to previously published methods for the analysis of BVO in soft drinks. PMID:27451219

  10. Simple and rapid quantification of brominated vegetable oil in commercial soft drinks by LC-MS.

    Science.gov (United States)

    Chitranshi, Priyanka; Gamboa da Costa, Gonçalo

    2016-12-15

    We report here a simple and rapid method for the quantification of brominated vegetable oil (BVO) in soft drinks based upon liquid chromatography-electrospray ionization mass spectrometry. Unlike previously reported methods, this novel method does not require hydrolysis, extraction or derivatization steps, but rather a simple "dilute and shoot" sample preparation. The quantification is conducted by mass spectrometry in selected ion recording mode and a single point standard addition procedure. The method was validated in the range of 5-25μg/mL BVO, encompassing the legal limit of 15μg/mL established by the US FDA for fruit-flavored beverages in the US market. The method was characterized by excellent intra- and inter-assay accuracy (97.3-103.4%) and very low imprecision [0.5-3.6% (RSD)]. The direct nature of the quantification, simplicity, and excellent statistical performance of this methodology constitute clear advantages in relation to previously published methods for the analysis of BVO in soft drinks.

  11. The contribution of anthropogenic bromine emissions to past stratospheric ozone trends: a modelling study

    Directory of Open Access Journals (Sweden)

    B.-M. Sinnhuber

    2009-04-01

    Full Text Available Bromine compounds play an important role in the depletion of stratospheric ozone. We have calculated the changes in stratospheric ozone in response to changes in the halogen loading over the past decades, using a two-dimensional (latitude/height model constrained by source gas mixing ratios at the surface. Model calculations of the decrease of total column ozone since 1980 agree reasonably well with observed ozone trends, in particular when the contribution from very short-lived bromine compounds is included. Model calculations with bromine source gas mixing ratios fixed at 1959 levels, corresponding approximately to a situation with no anthropogenic bromine emissions, show an ozone column reduction between 1980 and 2005 at Northern Hemisphere mid-latitudes of only ≈55% compared to a model run including all halogen source gases. In this sense anthropogenic bromine emissions are responsible for ≈45% of the model estimated column ozone loss at Northern Hemisphere mid-latitudes. However, since a large fraction of the bromine induced ozone loss is due to the combined BrO/ClO catalytic cycle, the effect of bromine would have been smaller in the absence of anthropogenic chlorine emissions. The chemical efficiency of bromine relative to chlorine for global total ozone depletion from our model calculations, expressed by the so called α-factor, is 64 on an annual average. This value is much higher than previously published results. Updates in reaction rate constants can explain only part of the differences in α. The inclusion of bromine from very short-lived source gases has only a minor effect on the global mean α-factor.

  12. Brominated lipids identify lipid binding sites on the surface of the reaction center from Rhodobacter sphaeroides.

    Science.gov (United States)

    Roszak, Aleksander W; Gardiner, Alastair T; Isaacs, Neil W; Cogdell, Richard J

    2007-03-20

    This study describes the use of brominated phospholipids to distinguish between lipid and detergent binding sites on the surface of a typical alpha-helical membrane protein. Reaction centers isolated from Rhodobacter sphaeroides were cocrystallized with added brominated phospholipids. X-ray structural analysis of these crystals has revealed the presence of two lipid binding sites from the characteristic strong X-ray scattering from the bromine atoms. These results demonstrate the usefulness of this approach to mapping lipid binding sites at the surface of membrane proteins.

  13. Enhancement of the carbon electrode capacitance by brominated hydroquinones

    Science.gov (United States)

    Gastol, Dominika; Walkowiak, Jedrzej; Fic, Krzysztof; Frackowiak, Elzbieta

    2016-09-01

    This paper presents supercapacitors utilizing new redox-active electrolytes with bromine species. Two sources of Br specimen were investigated, i.e. dibromodihydroxybenzene dissolved in KOH and potassium bromide dissolved in KOH with hydroxybenzene additive. KOH-activated carbon, exhibiting a well-developed porosity, was incorporated as an electrode material. The tested systems revealed a capacitance enhancement explained by Br- and partial BrO3- redox activity. The optimisation of the electrolyte concentration resulted in a capacitance value of 314 F g-1 achieved at 1.1 V voltage range. Good cyclability performance (11% capacitance loss) combined with a high capacitance value (244 F g-1) were obtained for the system operating in 0.2 mol L- 1 C6H4Br2O2 in 2 mol L-1 KOH electrolytic solution.

  14. Selective nitration and bromination of surprisingly ruffled phosphorus corroles.

    Science.gov (United States)

    Pomarico, Giuseppe; Tortora, Luca; Fronczek, Frank R; Smith, Kevin M; Paolesse, Roberto

    2016-05-01

    Phosphorus complexes of corrole have recently attracted increasing interest since these compounds can be easily prepared in good yields, are stable, and show unusual optical properties. For these reasons, phosphorus corroles represent a class of interesting compounds to be exploited in the field of material science or for biomedical investigations and the definition of synthetic pathways for their functionalization is an important step to optimize their properties for various applications. We report here the reactivity of the phosphorus complex of 5,10,15-tritolylcorrole in the nitration or bromination reaction. Both these attempts were successful, allowing the preparation of substituted phosphorus corroles, which can be used as intermediates of more complex architectures endowed with useful properties. Furthermore, the crystallographic characterization of both complexes shows that they have an unusual ruffled geometry of the corrole core, a conformation that has not been considered possible for such a macrocycle.

  15. The third international interlaboratory study on brominated flame retardants

    Energy Technology Data Exchange (ETDEWEB)

    Boer, J. de [Netherlands Institute for Fisheries Research, IJmuiden (Netherlands); Wells, D. [FRS Marine Laboratory, Aberdeen (United Kingdom)

    2004-09-15

    Polybrominated diphenyl ethers (PBDEs) have been produced as brominated flame retardants (BFRs) since the early 1970s and have been found in the aquatic environment since the late 1970s. However, as a result of their detection in sperm whales from deeper Atlantic waters and in human milk, many laboratories are now measuring PBDEs in environmental samples. A first international interlaboratory study (ILS) on the analysis of PBDEs, organised by the Bromine Science and Environmental Forum (BSEF), Brussels, Belgium, in collaboration with the Netherlands Institute for Fisheries Research (RIVO) was conducted in 1999-2000. The results showed that the 18 participating laboratories produced comparable results for BDE 47 in various matrices but had analytical difficulties for other BDEs, in particular for the BDEs 99 and 209. A second study was organised in 2001-2002 by BSEF, QUASIMEME and RIVO. That study showed improvement in comparability of the participating laboratories for BDE99 and some other BDEs. However, there was no improvement for BDE209. Hexabromocyclododecane (HBCD), tetrabromobisphenol-A (TBBP-A) and the dimethyl derivative of TBBP-A (dimethyl TBBP-A) were included in the second study. However, it appeared that only two or three laboratories were able to analyse these determinands. Others laboratories were still in the development phase with their methods for these BFRs. This third study was organised as a development exercise by QUASIMEME, in collaboration with RIVO between September and December 2003. The BFRs selected were the same as in the second study. Two biota test materials, a harbor sediment, a sewage sludge, and two standard solutions were dispatched to the participants.

  16. Formation of new brominated disinfection byproducts during chlorination of saline sewage effluents.

    Science.gov (United States)

    Ding, Guoyu; Zhang, Xiangru; Yang, Mengting; Pan, Yang

    2013-05-15

    Chlorination could be the most cost-effective method for disinfecting saline sewage effluents resulting from toilet flushing with seawater. Upon chlorination, the high levels of bromide ions in saline sewage effluents (up to 32 mg/L) can be oxidized to hypobromous acid/hypobromite, which could then react with organic matter in the sewage effluents to form brominated disinfection byproducts (Br-DBPs). In this study, primary and secondary saline sewage effluents were collected and chlorinated at different chlorine doses, and a powerful precursor ion scan method using ultra performance liquid chromatography/electrospray ionization-triple quadrupole mass spectrometry was adopted for detection and identification of polar Br-DBPs in these samples. With the new method, 54 major polar Br-DBPs were detected in the chlorinated saline effluents and six of them were newly identified as wastewater DBPs, including bromomaleic acid, 5-bromosalicylic acid, 3,5-dibromo-4-hydroxybenzaldehyde, 3,5-dibromo-4-hydroxybenzoic acid, 2,6-dibromo-4-nitrophenol, and 2,4,6-tribromophenol. The formation of polar Br-DBPs, especially those newly detected ones, during chlorination of the saline effluents was studied. For the secondary saline effluent, various polar Br-DBPs formed and reached their maximum levels at different chlorine doses, whereas for the primary saline effluent, the formation of polar Br-DBPs basically kept increasing with increasing chlorine dose. Compared with the secondary saline effluent, the primary saline effluent generated fewer and less Br-DBPs and rarely generated nitrogenous Br-DBPs.

  17. Dynamic dielectric properties and the γ transition of bromine doped polyacrylonitrile

    Directory of Open Access Journals (Sweden)

    2007-10-01

    Full Text Available Based on monitoring the γ process (the lowest temperature-relaxation in polyacrylonitrile (PAN by dynamic dielectric spectroscopy, new evidence for the formation of a charge transfer complex between bromine dopants and nitrile groups is presented. The experimental work is carried out on PAN and nitrile polymerized PAN with and without bromine doping and the effects of these factors on the γ process are measured. Nitrile polymerization results in diminishing of the γ process and in a 15% increase in its activation energy, whereas bromine doping produces splitting of the original γ process in PAN – coupled with a significant activation energy increase – and its complete disappearance in nitrile polymerized PAN. Both the splitting of the γ process and the higher activation energy reflect bromine-nitrile adduct formation..

  18. Potent competitive interactions of some brominated flame retardants and related compounds with human transthyretin in vitro

    NARCIS (Netherlands)

    Meerts, I.A.T.M.; Zanden, van J.J.; Luijks, E.A.C.; Leeuwen-Bol, van I.; Marsh, G.; Jakobsson, E.; Bergman, A.; Brouwer, A.

    2000-01-01

    Brominated flame retardants such as polybrominated diphenyl ethers (PBDEs), pentabromophenol (PBP), and tetrabromobisphenol A (TBBPA) are produced in large quantities for use in electronic equipment, plastics, and building materials. Because these compounds have some structural resemblance to the th

  19. A Novel Protocol for the Regioselective Bromination of Primary Alcohols in Unprotected Carbohydrates or Glycosides

    Institute of Scientific and Technical Information of China (English)

    薛伟华; 张立芬

    2012-01-01

    The regioselective and efficient bromination of primary hydroxyl groups in unprotected carbohydrates or glycosides is successfully achieved by using (chloro-phenylthio-methylene)dimethylammoniumchloride (CPMA) in the presence of tetrabutylammonium bromide (TBAB) in dry DMF.

  20. Bromine determination by neutron activation analysis and its distribution in the atmosphere

    International Nuclear Information System (INIS)

    Bromine, one of the main participants in ozone layer destruction, is 10 to 100 times more effective than chlorine. There are two principal sources of methyl bromide emissions: the oceans and some pesticides that are used in farming. Bromine was detected in 'premium' and 'magna sin' gasolines (2.86±0.96 and 1.54±0.38 ppm, respectively) as well as in condensed water found in exhaust pipes of vehicles. In addition, samples of rainwater were also analyzed to determine atmospheric bromine concentration. In water samples Br concentrations ranging from 2.09 to 0.06 ppm were found. The techniques utilised were neutron activation analysis and high voltage electrophoresis, the latter to determine the chemical form of bromine in condensed water samples. Finally, suspended particles from rainwater were also analysed by scanning electron microscopy (SEM). (author)

  1. METHOD OF SEPARATING URANIUM, PLUTONIUM AND FISSION PRODUCTS BY BROMINATION AND DISTILLATION

    Science.gov (United States)

    Jaffey, A.H.; Seaborg, G.T.

    1958-12-23

    The method for separation of plutonium from uranium and radioactive fission products obtained by neutron irradiation of uranlum consists of reacting the lrradiated material with either bromine, hydrogen bromide, alumlnum bromide, or sulfur and bromine at an elevated temperature to form the bromides of all the elements, then recovering substantlally pure plutonium bromide by dlstillatlon in combinatlon with selective condensatlon at prescribed temperature and pressure.

  2. Bromine-lithium exchange: An efficient tool in the modular construction of biaryl ligands.

    Science.gov (United States)

    Bonnafoux, Laurence; Leroux, Frédéric R; Colobert, Françoise

    2011-01-01

    Regioselective bromine-lithium exchange reactions on polybrominated biaryls enable the modular synthesis of various polysubstituted biphenyls such as bis(dialkylphosphino)-, bis(diarylphosphino)- and dialkyl(diaryl)phosphinobiphenyls. All permutations of substituents at the ortho positions of the biphenyls are possible. In a similar manner, one can gain access to monophosphine analogues. So far, such a process, based on the effective discrimination between bromine atoms as a function of their chemical environment, has been observed only sporadically.

  3. Bromine atom production and chain propagation during springtime Arctic ozone depletion events in Barrow, Alaska

    OpenAIRE

    Thompson, Chelsea R.; Shepson, Paul B.; Liao, Jin; Huey, L. Greg; Cantrell, Chris; Flocke, Frank; Orlando, John

    2016-01-01

    Ozone depletion events (ODEs) in the Arctic are primarily controlled by a bromine radical-catalyzed destruction mechanism that depends on the efficient production and recycling of Br atoms. Numerous laboratory and modeling studies have suggested the importance of heterogeneous recycling of Br through HOBr reaction with bromide on saline surfaces. However, the gas-phase regeneration of bromine atoms through BrO-BrO radical reactions has been assumed to be an efficient, if not dominant, pa...

  4. Gaia Paradigm: A Biotic Origin Of The Polar Sunrise Arctic Bromine Explosion

    OpenAIRE

    Iudin, M.

    2008-01-01

    The main attention is given to discussion of the natural causes and regularities of the Arctic bromine pollution. We make notice of marine microbial organisms and their metabolism as a prime driving force for the elemental biogeochemical cycles. One of the important conclusions of this study is on similarity between ocean bromine concentrating as by-product of the marine microbial activities and nitrogen fixation by soil bacteria. In both cases, microbial organisms and their food webs maintai...

  5. Performance and Degradation of A Lithium-Bromine Rechargeable Fuel Cell Using Highly Concentrated Catholytes

    OpenAIRE

    Bai, Peng; Bazant, Martin Z.

    2016-01-01

    Lithium-air batteries have been considered as ultimate solutions for the power source of long-range electrified transportation, but state-of-the-art prototypes still suffer from short cycle life, low efficiency and poor power output. Here, a lithium-bromine rechargeable fuel cell using highly concentrated bromine catholytes is demonstrated with comparable specific energy, improved power density, and higher efficiency. The cell is similar in structure to a hybrid-electrolyte Li-air battery, wh...

  6. Vanadate-dependent bromoperoxidases from Ascophyllum nodosum in the synthesis of brominated phenols and pyrroles.

    Science.gov (United States)

    Wischang, Diana; Radlow, Madlen; Hartung, Jens

    2013-09-01

    Bromoperoxidases from the brown alga Ascophyllum nodosum, abbreviated as V(Br)PO(AnI) and V(Br)PO(AnII), show 41% sequence homology and differ by a factor of two in the percentage of α-helical secondary structures. Protein monomers organize into homodimers for V(Br)PO(AnI) and hexamers for V(Br)PO(AnII). Bromoperoxidase II binds hydrogen peroxide and bromide by approximately one order of magnitude stronger than V(Br)PO(AnI). In oxidation catalysis, bromoperoxidases I and II turn over hydrogen peroxide and bromide similarly fast, yielding in morpholine-4-ethanesulfonic acid (MES)-buffered aqueous tert-butanol (pH 6.2) molecular bromine as reagent for electrophilic hydrocarbon bromination. Alternative compounds, such as tribromide and hypobromous acid are not sufficiently electrophilic for being directly involved in carbon-bromine bond formation. A decrease in electrophilicity from bromine via hypobromous acid to tribromide correlates in a frontier molecular orbital (FMO) analysis with larger energy gaps between the π-type HOMO of, for example, an alkene and the σ*(Br,X)-type LUMO of the bromination reagent. By using this approach, the reactivity of substrates and selectivity for carbon-bromine bond formation in reactions mediated by vanadate-dependent bromoperoxidases become predictable, as exemplified by the synthesis of bromopyrroles occurring naturally in marine sponges of the genera Agelas, Acanthella, and Axinella. PMID:23881071

  7. Photothermally induced bromination of carbon/polymer bipolar plate materials for fuel cell applications

    Energy Technology Data Exchange (ETDEWEB)

    Schade, Martin; Franzka, Steffen [Fakultät für Chemie, Universität Duisburg-Essen, 45117 Essen (Germany); Center for Nanointegration Duisburg-Essen (CENIDE), University of Duisburg-Essen, Carl-Benz-Straße 199, 47057 Duisburg (Germany); Cappuccio, Franco; Peinecke, Volker; Heinzel, Angelika [Center for Nanointegration Duisburg-Essen (CENIDE), University of Duisburg-Essen, Carl-Benz-Straße 199, 47057 Duisburg (Germany); Zentrum für BrennstoffzellenTechnik (ZBT), Carl-Benz-Straße 201, 47057 Duisburg (Germany); Hartmann, Nils, E-mail: nils.hartmann@uni-due.de [Fakultät für Chemie, Universität Duisburg-Essen, 45117 Essen (Germany); Center for Nanointegration Duisburg-Essen (CENIDE), University of Duisburg-Essen, Carl-Benz-Straße 199, 47057 Duisburg (Germany)

    2015-05-01

    Graphical abstract: - Highlights: • Photothermal laser bromination of carbon/polymer materials is demonstrated. • Using a microfocused laser functionalized domains with diameters of 5 μm and 100 μm and more can be fabricated. • Bromine groups can be transformed in a variety of other chemical functionalities, i.e. amine groups. • Depending on the chemical functionality, the local chemical affinity and wettability is changed. • The routine can be applied to standard bipolar plate materials used for fuel cell applications. - Abstract: A facile photothermal procedure for direct functionalization of carbon/polymer bipolar plate materials is demonstrated. Through irradiation with a microfocused beam of an Ar{sup +}-laser at λ = 514 nm in gaseous bromine and distinct laser powers and pulse lengths local bromination of the carbon/polymer material takes place. At a 1/e spot diameter of 2.1 μm, functionalized surface areas with diameters down to 5 μm are fabricated. In complementary experiments large-area bromination is investigated using an ordinary tungsten lamp. For characterization contact angle goniometry, X-ray photoelectron spectroscopy and electron microscopy in conjunction with labeling techniques are employed. After irradiation bromine groups can easily be substituted by other chemical functionalities, e.g. azide and amine groups. This provides a facile approach in order to fabricate surface patterns and gradient structures with varying wetting characteristics. Mechanistic aspects and prospects of photothermal routines in micropatterning of carbon/polymer materials are discussed.

  8. Springtime surface ozone fluctuations at high Arctic latitudes and their possible relationship to atmospheric bromine

    Science.gov (United States)

    Oltmans, Samuel J.; Sheridan, Patrick J.; Schnell, Russell C.; Winchester, John W.

    1988-01-01

    At high Arctic stations such as Barrow, Alaska, springtime near-surface ozone amounts fluctuate between the highest and lowest values seen during the course of the year. Episodes when the surface ozone concentration is essentially zero last up to several days during this time of year. In the Arctic Gas and Aerosol Sampling Program (AGASP-I and AGASP-II) in 1983 and 1986, it was found that ozone concentrations often showed a very steep gradient in altitude with very low values near the surface. The cold temperatures, and snow-covered ground make it unlikely that the surface itself would rapidly destroy significant amounts of ozone. The AGASP aircraft measurements that found low ozone concentrations in the lowest layers of the troposphere also found that filterable excess bromine (the amount of bromine in excess of the sea salt component) in samples collected wholly or partially beneath the temperature inversion had higher bromine concentrations than other tropospheric samples. Of the four lowest ozone minimum concentrations, three of them were associated with the highest bromine enrichments. Surface measurements of excess filterable bromine at Barrow show a strong seasonal dependence with values rising dramatically early in March, then declining in May. The concentration of organic bromine gases such as bromoform rise sharply during the winter and then begin to decline after March with winter and early spring values at least three times greater than the summer minimum.

  9. Addition of bromine as a diagnostic gas to inertial confinement fusion target microspheres

    International Nuclear Information System (INIS)

    Currently, direct fuel rho r measurements on Inertial Confinement Fusion (ICF) targets by neutron activation of the argon tracer gas mixed with the DT fuel would require a 100 fold increase in neutron yield. Bromine, on the other hand, has excellent properties for neutron activation analysis at neutron yields of 10two' to 108, when present at an internal pressure of from 0.1 to 0.2 atmospheres. Bromine addition is accomplished in a 2 furnace system using the dried-gel method of microsphere production. An upper furnace operated at 15000C is separated from a lower furnace by a cooled zone. The lower furnace is filled with bromine gas and operated at approximately 12500C. The upper furnace is the glass production furnace. The cooled zone in between the upper and lower furnace is to prevent the hot bromine gas from rising into the upper furnace. The microspheres pass through the cooled zone and immediately into the 12500C bromine furnace where the bromine permeates into the spheres

  10. Bromine and bromide in rainfall, cloud, stream and groundwater in the Plynlimon area of mid-Wales

    Directory of Open Access Journals (Sweden)

    2007-01-01

    Full Text Available Bromine in rainfall, cloud water, stream water and groundwater were measured in the upper River Severn catchments at Plynlimon in mid-Wales using two analytical procedures for bromide determination: a colorimetric method and, later, ion chromatography. Discrepancies between the methods indicated that the colorimetric method was measuring more than just bromide so it was "dissolved labile bromine" (DLBr (Neal et al., 2007. This paper reports the variation in DLBr and bromide across the Plynlimon region and assesses the differences between these two measures. The average DLBr concentration in the streams ranges between 18.3 and 27.8 µg l−1 compared with a rainfall average concentration of 15.6 µg l−1. The corresponding bromide concentrations in the streams are 13.8–18.6 µg l−1 and 13.2 µg l−1 in rainfall. For cloud water, throughfall and stemflow, DLBr concentrations are an order of magnitude higher than in rainfall and the concentrations are strongly correlated with chloride. Average values of bromide in rainfall and cloud water are similar to those of DLBr and are strongly correlated with chloride: unfortunately, no bromide measurements were taken in throughfall and stemflow. These results indicate that marine aerosol inputs are high and that the DLBr in these inputs is dominated by bromide. For cloud water, DLBr was correlated with dissolved organic carbon (DOC as well as with chloride; hence, there may well be an organic-associated component. Within the streams draining the forested areas, DLBr increases with time as DOC increases. DLBr concentrations in the streams are correlated with DOC in most cases and, to a lesser degree, with chloride. However, for bromide there is no correlation with DOC, but a weak correlation with chloride remains and the gradient is higher than for the DLBr case. Increasing concentrations of both DLBr and DOC may well reflect the wetting up of the catchments as transpiration diminshes as the trees age

  11. XPS STUDIES ON SURFACE MODIFIED POLY[1-(TRIMETHYLSILYL)-1-PROPYNE] MEMBRANES Ⅱ SURFACE MODIFICATION BY BROMINE VAPOR

    Institute of Scientific and Technical Information of China (English)

    XU Guanfan; SUN Xiaoguang; QIU Xuepeng; ZHANG Jinlan; ZHENG Guodong

    1994-01-01

    Surface modification of poly [ 1-(trimethylsilyl )-1-propyne ] ( PTMSP ) membranes by bromine vapor has been studied. It is shown that Br/C atomic ratio at the surfacesincreased with the time of bromination until about 60 min, then it reached a plateau. The results of XPS and IR studies indicated that the addition of bromine to double bonds and the replacement of H on CH3 by bromine had taken place so that a new peak at 286.0 eV (C-Br)in C1sspectra and some new bands, e. g. at 1220 and 580cm-1,in IR spectra were formed. The fact, Po2, permeability of oxygen, decreased and αO2/N2, separation factor of oxygen relative to nitrogen, increased with bromination time, shows that surface modification of PTMSP by bromine may be an efficient approachto prepare PTMSP membranes used for practical gas separations.

  12. Utilization of a Green Brominating Agent for the Spectrophotometric Determination of Pipazethate HCl in Pure Form and Pharmaceutical Preparations

    OpenAIRE

    Ayman A. Gouda

    2013-01-01

    Five simple, accurate, and sensitive spectrophotometric methods (A–E) have been described for the indirect assay of pipazethate HCl (PZT) either in pure form or in pharmaceutical preparations. The proposed methods are based on the bromination of pipazethate HCl with a solution of excess bromate-bromide mixture in hydrochloric acid medium and subsequent estimation of the residual bromine by different reaction schemes. In the first three methods (A–C), the determination of the residual bromine ...

  13. Bromine partitioning between olivine and melt at OIB source conditions: Indication for volatile recycling

    Science.gov (United States)

    Joachim, Bastian; Ruzié, Lorraine; Burgess, Ray; Pawley, Alison; Clay, Patricia L.; Ballentine, Christopher J.

    2016-04-01

    Halogens play a key role in our understanding of volatile transport processes in the Earth's mantle. Their moderate (fluorine) to highly (iodine) incompatible and volatile behavior implies that their distribution is influenced by partial melting, fractionation and degassing processes as well as fluid mobilities. The heavy halogens, particularly bromine and iodine, are far more depleted in the Earth's mantle than expected from their condensation temperature (Palme and O'Neill 2014), so that their very low abundances in basalts and peridotites (ppb-range) make it analytically challenging to investigate their concentrations in Earth's mantle reservoirs and their behavior during transport processes (Pyle and Mather, 2009). We used a new experimental technique, which combines the irradiation technique (Johnson et al. 2000), laser ablation and conventional mass spectrometry. This enables us to present the first experimentally derived bromine partition coefficient between olivine and melt. Partitioning experiments were performed at 1500° C and 2.3 GPa, a P-T condition that is representative for partial melting processes in the OIB source region (Davis et al. 2011). The bromine partition coefficient between olivine and silicate melt at this condition has been determined to DBrol/melt = 4.37•10-4± 1.96•10-4. Results show that bromine is significantly more incompatible than chlorine (˜1.5 orders of magnitude) and fluorine (˜2 orders of magnitude) due to its larger ionic radius. We have used our bromine partitioning data to estimate minimum bromine abundances in EM1 and EM2 source regions. We used minimum bromine bulk rock concentrations determined in an EM1 (Pitcairn: 1066 ppb) and EM2 (Society: 2063 ppb) basalt (Kendrick et al. 2012), together with an estimated minimum melt fraction of 0.01 in OIB source regions (Dasgupta et al. 2007). The almost perfect bromine incompatibility results in minimum bromine abundances in EM1 and EM2 OIB source regions of 11 ppb and 20

  14. Single-run determination of polybrominated diphenyl ethers (PBDEs) di- to deca-brominated in fish meal, fish oil and fish feed by isotope dilution: Application of automated sample purification and gas chromatography/ion trap tandem mass spectrometry (GC/ITMS)

    Energy Technology Data Exchange (ETDEWEB)

    Blanco, Sonia Lucia, E-mail: lucia@anfaco.es [Centro Tecnico Nacional de Conservacion de Productos de la Pesca (ANFACO-CECOPESCA), Carretera Colexio Universitario No. 16, 36310, Vigo, Pontevedra (Spain); Vieites, Juan M. [Centro Tecnico Nacional de Conservacion de Productos de la Pesca (ANFACO-CECOPESCA), Carretera Colexio Universitario No. 16, 36310, Vigo, Pontevedra (Spain)

    2010-07-05

    The present paper describes the application of automated cleanup and fractionation procedures of the Power Prep system (Fluid Management Systems) for the determination of polybrominated diphenyl ethers (PBDEs) in feeding stuffs and fish meal and oil. Gas chromatography (GC) separation followed by ion trap tandem mass spectrometry detection in EI mode (ITMS) allowed the analysis of di- to deca-BDEs in the samples matrices used in fish aquaculture. The method developed enabled the determination of 26 native PBDE congeners and 11 {sup 13}C{sub 12}-labelled congeners, including deca-BDE 209, in a single-run analysis, using isotope dilution. The automated cleanup, consisting of a succession of multilayer silica and basic alumina columns previously applied by Wyrzykowska et al. (2009) in combustion flue gas, was succesfully applied in our complex matrices. The method allowed an increase in productivity, i.e. lower time was required to process samples, and simultaneous purification of several samples was achieved at a time, reducing analyst dedication and human error input. Average recoveries of 43-96% were obtained. GC/ITMS can overcome the complexity originating from the sample matrix, eliminating matrix effects by tandem MS, to enable the detection of congeners penta- to nona-BDEs where interferent masses were present. The provisional detection limits, estimated in the samples, were 5-30 pg for di-, tri-, tetra-, and penta-BDEs, 20-65 pg for hexa-, hepta-, octa- and nona-BDEs, and 105 pg for deca-BDE. Reduction of deca-BDE 209 blank values is of concern to ongoing research. Good accuracy was obtained by application of the whole procedure, representing an efficient, low-cost and fast alternative for routine analyses.

  15. Non-polar halogenated natural products bioaccumulated in marine samples. II. Brominated and mixed halogenated compounds.

    Science.gov (United States)

    Vetter, Walter; Jun, Wu

    2003-07-01

    Several identified and potential natural brominated bioaccumulative compounds were studied in this work. 4,6-dibromo-2-(2('),4(')-dibromo)phenoxyanisole (BC-2) previously detected in Australian marine mammals and isolated from sponges, was synthesized. Two byproducts (a tetrabromo isomer and a tribromo congener) were investigated as well. The byproducts of the synthesis were not identified in the environmental samples investigated. Previously described natural brominated compounds (BC-1, BC-2, BC-3, BC-10, BC-11, MHC-1) and anthropogenic brominated diphenyl ethers (BDE-47, BDE-99, BDE-100, BDE-154) were detected in a sample of human milk. The sample was from a woman from the Faeroe Islands who frequently consumed fish as well as whale blubber and meat. The most abundant compound originated from the natural tetrabromo phenoxyanisole BC-3 which may have a 3:1 distribution of bromine on the two phenyl units. This sample also accumulated a dibromochloroanisole, as well as a previously unknown mixed halogenated compound (MHC-X) and an unknown, most likely aromatic brominated compound. Co-elutions on a DB-5 column were found for BDE-99 and BC-11 as well as BDE-154 and the unknown brominated compound. This suggests that quantification of these two compounds has to be carried out carefully.Two samples of lower trophic level, namely Baltic cod liver and Mexican mussel tissue, were investigated as well. The cod liver samples contained BDE congeners but also abundant signals for the natural 2,3,3('),4,4('),5,5(')-heptachloro-1(')-methyl-1,2(')-bipyrrole Q1 and tribromoanisole (TBA). The mussel sample contained Q1, TBA, another halogenated anisole, BC-1, BC-2, and BC-3, as well as additional, potential natural brominated compounds in the elution range of tribromophenoxyanisoles. PMID:12738265

  16. An exemplary case of a bromine explosion event linked to cyclone development in the Arctic

    Science.gov (United States)

    Blechschmidt, A.-M.; Richter, A.; Burrows, J. P.; Kaleschke, L.; Strong, K.; Theys, N.; Weber, M.; Zhao, X.; Zien, A.

    2016-02-01

    Intense, cyclone-like shaped plumes of tropospheric bromine monoxide (BrO) are regularly observed by GOME-2 on board the MetOp-A satellite over Arctic sea ice in polar spring. These plumes are often transported by high-latitude cyclones, sometimes over several days despite the short atmospheric lifetime of BrO. However, only few studies have focused on the role of polar weather systems in the development, duration and transport of tropospheric BrO plumes during bromine explosion events. The latter are caused by an autocatalytic chemical chain reaction associated with tropospheric ozone depletion and initiated by the release of bromine from cold brine-covered ice or snow to the atmosphere. In this manuscript, a case study investigating a comma-shaped BrO plume which developed over the Beaufort Sea and was observed by GOME-2 for several days is presented. By making combined use of satellite data and numerical models, it is shown that the occurrence of the plume was closely linked to frontal lifting in a polar cyclone and that it most likely resided in the lowest 3 km of the troposphere. In contrast to previous case studies, we demonstrate that the dry conveyor belt, a potentially bromine-rich stratospheric air stream which can complicate interpretation of satellite retrieved tropospheric BrO, is spatially separated from the observed BrO plume. It is concluded that weather conditions associated with the polar cyclone favoured the bromine activation cycle and blowing snow production, which may have acted as a bromine source during the bromine explosion event.

  17. Excited atomic bromine energy transfer and quenching mechanisms

    Science.gov (United States)

    Johnson, Ray O.

    1993-08-01

    Pulsed and steady-state photolysis experiments have been conducted to determine the rate coefficients for collisional deactivation of the spin-orbit excited state of atomic bromine, Br((sup 2)P(sub 1/2)). Pulsed lifetime studies for quenching by Br2 and CO2 established absolute rate coefficients at room temperature of k(sub Br2) = 1.2 +/- 0.1 x 10(exp-12) and k(sub CO2) = 1.5 +/0.2 x 10(exp-11) cu cm/molecule-s. Steady-state photolysis methods were used to determine the quenching rates for the rare gases, N2, 02, H2, D2, NO, NO2, N2O, SF6, CF4, CH4, CO, CO2, COS, SO2, H2S, HBr, HC1, and HI relative to that for Br2. Quenching rate temperature dependence was examined for Br2, CO2, N2O, HCl, COS, NO, and NO2 for temperatures from 300 to 420 K. Diffusion and three body effects were examined in order to determine the slowest relative quenching rate measurable by this experimental technique.

  18. Untypical bromine corrosion in boilers co-firing biomass

    Directory of Open Access Journals (Sweden)

    A. Hernas

    2012-09-01

    Full Text Available Purpose: The aim of this study was to determine the untypical corrosion resistance of rotary air preheaters in a biomass co-fired power plant.Design/methodology/approach: The selected results of some components of regenerative rotary air preheaters in a biomass co-fired power plant are presented. The macro and microstructure of corroded components of a LUVO preheater after 3 years of service are presented. The chemical composition of corrosion products was determined by X-ray microanalysis.Findings: Data concerning toxicity and identification of PBDEs (Polibrominated diphenyl ethers in the biomass is very limited. The presented research provides information and the proposed corrosion reaction mechanism in environments containing biomass with aggressive compounds like Cl, Si, H and Br.Research limitations/implications: An extended research on PBDEs in power plant fuels is necessary to give a full assessment of the corrosion mechanism in the presented environment; obligatory classification of the co-fired biomass.Originality/value: Firstly, an assessment of the danger for boiler materials co-firing biomass containing brominated organic flame and presentation of the reaction during the corrosion process and degradation of power boiler components in the presented environment. Secondly, the highlighting of the problem that there is a need to properly select and determine the chemical composition of the biomass used.

  19. Brominated flame retardants in Belgian little owl (Athene noctua) eggs

    Energy Technology Data Exchange (ETDEWEB)

    Jaspers, V.; Covaci, A.; Maervoet, J.; Dauwe, T.; Schepens, P.; Eens, M. [Antwerp Univ. (Belgium)

    2004-09-15

    Since the 1960s, polybrominated diphenylethers (PBDEs), a class of brominated flame retardants (BFRs), are widely used in textiles, plastics, electronic equipment and other materials. Their massive use has led to the ubiquitous presence of PBDEs in the environment and in biota in which the PBDE levels seem to increase rapidly. High concentrations of some congeners may cause adverse effects in both wildlife and in human populations1 and this has led to the growing concern of scientists over the last decade and to the need for more data on environmental levels of PBDEs. The little owl (Athene noctua) is a small sedentary predator, which makes it a very suitable biomonitoring species. This owl species feeds on a variety of preys, including small mammals and birds, reptiles, amphibians, earthworms and beetles, depending on the season and the local circumstances. Because very limited information is available about contamination levels in the little owl, a study was conducted to determine the concentrations of PBDEs, polybrominated biphenyls (PBBs), polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) in deserted or addled eggs of little owls in Belgium. Eggs have been used successfully as a monitoring tool for persistent organic pollutants (POPs) in several studies. Although the analysis of POPs in deserted or addled eggs has clear limitations, these can be partially avoided by analysing only highly persistent components, for which the original composition will not change due to 'posthatching' microbiological degradation.

  20. Measurement-based modeling of bromine chemistry in the boundary layer: 1. Bromine chemistry at the Dead Sea

    Directory of Open Access Journals (Sweden)

    E. Tas

    2006-01-01

    Full Text Available The Dead Sea is an excellent natural laboratory for the investigation of Reactive Bromine Species (RBS chemistry, due to the high RBS levels observed in this area, combined with anthropogenic air pollutants up to several ppb. The present study investigated the basic chemical mechanism of RBS at the Dead Sea using a numerical one-dimensional chemical model. Simulations were based on data obtained from comprehensive measurements performed at sites along the Dead Sea. The simulations showed that the high BrO levels measured frequently at the Dead Sea could only partially be attributed to the highly concentrated Br− present in the Dead Sea water. Furthermore, the RBS activity at the Dead Sea cannot solely be explained by a pure gas phase mechanism. This paper presents a chemical mechanism which can account for the observed chemical activity at the Dead Sea, with the addition of only two heterogeneous processes: the "Bromine Explosion" mechanism and the heterogeneous decomposition of BrONO2. Ozone frequently dropped below a threshold value of ~1 to 2 ppbv at the Dead Sea evaporation ponds, and in such cases, O3 became a limiting factor for the production of BrOx (BrO+Br. The entrainment of O3 fluxes into the evaporation ponds was found to be essential for the continuation of RBS activity, and to be the main reason for the jagged diurnal pattern of BrO observed in the Dead Sea area, and for the positive correlation observed between BrO and O3 at low O3 concentrations. The present study has shown that the heterogeneous decomposition of BrONO2 has a great potential to affect the RBS activity in areas influenced by anthropogenic emissions, mainly due to the positive correlation between the rate of this process and the levels of NO2. Further investigation of the influence of the decomposition of BrONO2 may be especially important in understanding the RBS activity at mid-latitudes.

  1. Measurement-based modeling of bromine chemistry in the boundary layer: 1. Bromine chemistry at the Dead Sea

    Directory of Open Access Journals (Sweden)

    A. Pour Biazar

    2006-06-01

    Full Text Available The Dead Sea is an excellent natural laboratory for the investigation of Reactive Bromine Species (RBS chemistry, due to the high RBS levels observed in this area, combined with anthropogenic air pollutants up to several ppb. The present study investigated the chemical mechanism of RBS at the Dead Sea using a numerical one-dimensional chemical model. Simulations were based on data obtained from comprehensive measurements performed at sites along the Dead Sea. The simulations showed that the high BrO levels measured frequently at the Dead Sea could only partially be attributed to the highly concentrated Br− present in the Dead Sea water. Further, the RBS activity at the Dead Sea cannot solely be explained by a pure gas phase mechanism. This paper presents a chemical mechanism which can account for the observed chemical activity at the Dead Sea, with the addition of only two heterogeneous processes: the "Bromine Explosion" mechanism and the heterogeneous decomposition of BrONO2. Ozone frequently dropped below a threshold value of ~1 to 2 ppbv at the Dead Sea evaporation ponds, and in such cases, O3 became a limiting factor for the production of BrOx (BrO+Br. The entrainment of O3 fluxes into the evaporation ponds was found to be essential for the continuation of RBS activity, and to be the main reason for the positive correlation observed between BrO and O3 at low O3 concentrations, and for the jagged diurnal pattern of BrO observed in the Dead Sea area. The present study has shown that the heterogeneous decomposition of BrONO2 has the potential to greatly affect the RBS activity in areas under anthropogenic influence, mainly due to the positive correlation between the rate of this process and the levels of NO2. Further investigation of the influence of the decomposition of BrONO2 may be especially important in understanding the RBS activity at mid-latitudes.

  2. Brominated flame retardants in end-of-life management not problematic regarding formation of brominated dioxins/furans (PBDD/F)

    Energy Technology Data Exchange (ETDEWEB)

    Drohmann, D. [Great Lakes Chemical, Bergisch Gladbach (Germany); Tange, L. [Eurobrom B.V., Rijswijk (Netherlands); Rothenbacher, K. [Bromine Science and Environmental Forum, Brussels (Belgium)

    2004-09-15

    Bromine is used as the building block for some of the most effective flame retarding agents available to the plastics industry today. They are used to protect against the risk of accidental fires in a wide range of products. Brominated flame retardants (BFRs), as all flame retardants, act to decrease the risk of fire by increasing the fire resistance of the materials in which they are applied. There is a perception that BFRs affect adversely the end-of-life management of plastics through formation of brominated dioxins and furans (PBDD/F). In fact, there exists a wide range of data and practical experience demonstrating that the end-of-life management of plastics containing BFRs are fully compliant with legislation setting the strictest limit values for PBDD/F and is fully compatible with an integrated waste management concept. Furthermore, all existing EU Risk Assessments on BFRs according to the European Existing Substance Regulations include an assessment of the potential formation of dioxins and furans. All assessments conclude that the risks along the life-cycle of the chemicals for human health and the environment associated with the potential formation of PBDD/F are negligible. Moreover, two recent Swedish studies found, that consumer products with BFRs emit less pollutants than the same products without any FRs. This paper summarises available studies and presents the latest results regarding potential formation of brominated dioxins and furans in end-of-life management of plastics containing brominated flame retardants. Additionally, before BFR products enter the market they are tested for PBDD/F according to the ''German Dioxin Ordinance''. Depending on the substitution pattern the limit values for PBDD/F are set at <1{mu}g/kg (ppb) respectively <5{mu}g/kg (ppb).

  3. Terminal elimination half-lives of the brominated flame retardants TBBPA, HBCD, and lower brominated PBDEs in humans

    Energy Technology Data Exchange (ETDEWEB)

    Geyer, H.J.; Schramm, K.W.; Feicht, E.A.; Fried, K.W.; Henkelmann, B.; Lenoir, D. [GSF-National Research Center, Institute of Ecological Chemistry, Neuherberg (Germany); Darnerud, P.O.; Aune, M. [Swedish National Food Administration, Uppsala (Sweden); Schmid, P. [Swiss Federal Laboratories for Materials Testing and Research, Laboratory of Organic Chemistry, EMPA Duebendorf (Switzerland); McDonald, T.A. [Office of Environmental Health Assessment, California EPA, Oakland, CA (United States)

    2004-09-15

    Brominated flame retardants (BFRs) are widely used in polymers and textiles and applied in electronic equipment, construction materials, and furniture for the purpose of fire prevention. BFRs with the highest production volume are tetrabromobisphenol A (TBBPA), 1,2,5,6,9,10- hexabromocyclododecanes (HBCDs: {alpha}-HBCD + {beta}-HBCD + {gamma}-HBCD), and polybrominated diphenyl ethers (PBDEs). Several BFRs are highly lipophilic persistent organic pollutants (POPs) which have been identified in the aquatic and terrestrial environment including wildlife and humans. In exposed organisms including humans toxic effects, bioaccumulation, metabolism, and pharmacokinetics (especially half-life t{sub 1/2}) are important criterions in the hazard assessment. The aim of the present study was to estimate the terminal elimination half-lives (t{sub 1/2H}) of the main BFRs from the whole body (also named body-burden half-life) and/or from the adipose tissue (fat) of adult humans. The t{sub 1/2H} data for the following BFRs were evaluated: TBBPA, HBCD, 2,2',4,4'- tetrabromodiphenyl ether (BDE-47), 2,2',4,4',5-pentaBDE (BDE-99), 2,2',4,4',6-pentaBDE (BDE- 100), 2,2',4,4',5,5'-hexaBDE (BDE-153), and 2,2',4,4',5,6-hexaBDE (BDE-154).

  4. GAS SORPTION AND TRANSPORT IN POLY (PHENYLENE OXIDE )(PPO)AND ARYL-BROMINATED PPO MEMBRANES

    Institute of Scientific and Technical Information of China (English)

    JIA Lianda; F.R.SHEU, R.T. CHERN; H.B. HOPFENBERG

    1989-01-01

    The apparent solubility (S), concentration- average diffusivity (D), and permeability (P), for CO2,CH4 and N2 through PPO and aryl- brominated PPO at 35 ℃ for pressure ranging from 1 to 26 atm are reported. It is found that P,D, and Sof the membranes to all the three gases vary with the extent of bromination. S increases with the increase of the perecnt of bromine in each case, but D to CO2 increases remarkably only at higher degree of bromination, and therefore, P to CO2 is increased by more than 100% over a wide range of pressure in the case .The solubility data are well described by the dual mode sorption model. It is found that the gas molecules sorbed by the Langmuir mode are relatively more immobilized and the contribution of the nonequilibrium character of the polymer to gas permeation increases obviously for CO2 and is hardly changed for CH4 with increasing bromine content. These observations are interpreted in terms of changes in specific free volume (SFV)and the cohesive energy density (CED) of the polymers.

  5. Removal of brominated flame retardant from electrical and electronic waste plastic by solvothermal technique

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Cong-Cong [Research Center For Eco-Environmental Sciences, Chinese Academy of Sciences, 18 Shuangqing Road, Beijing 100085 (China); Zhang, Fu-Shen, E-mail: fszhang@rcees.ac.cn [Research Center For Eco-Environmental Sciences, Chinese Academy of Sciences, 18 Shuangqing Road, Beijing 100085 (China)

    2012-06-30

    Highlights: Black-Right-Pointing-Pointer A process for brominated flame retardants (BFRs) removal in plastic was established. Black-Right-Pointing-Pointer The plastic became bromine-free with the structure maintained after this treatment. Black-Right-Pointing-Pointer BFRs transferred into alcohol solvent were easily debrominated by metallic copper. - Abstract: Brominated flame retardants (BFRs) in electrical and electronic (E and E) waste plastic are toxic, bioaccumulative and recalcitrant. In the present study, tetrabromobisphenol A (TBBPA) contained in this type of plastic was tentatively subjected to solvothermal treatment so as to obtain bromine-free plastic. Methanol, ethanol and isopropanol were examined as solvents for solvothermal treatment and it was found that methanol was the optimal solvent for TBBPA removal. The optimum temperature, time and liquid to solid ratio for solvothermal treatment to remove TBBPA were 90 Degree-Sign C, 2 h and 15:1, respectively. After the treatment with various alcohol solvents, it was found that TBBPA was finally transferred into the solvents and bromine in the extract was debrominated catalyzed by metallic copper. Bisphenol A and cuprous bromide were the main products after debromination. The morphology and FTIR properties of the plastic were generally unchanged after the solvothermal treatment indicating that the structure of the plastic maintained after the process. This work provides a clean and applicable process for BFRs-containing plastic disposal.

  6. Effect of the Bromine-Based Flame Retardant Plastic Pyrolysis of Hydrotalcite

    Directory of Open Access Journals (Sweden)

    Morita N.

    2016-01-01

    Full Text Available In this study, a method is presented to decrease halogen compounds in the product oil from thermolysis of polystyrene and polypropylene mixed plastic spiked with tetrabromobisphenol A. A mixture of hydrotalcite and plastic was pyrolyzed in a glass reactor at 400 °C under a nitrogen atmosphere. Bromine compounds in the residual substances were measured. The yield of product oil increased using hydrotalcite as an additive. The bromine compounds that were the major ingredients in the oil after thermolysis at 400 °C from the mixed plastic, which also included toluene, ethyl benzene, styrene, and 1-methylethyl benzene, were 2-bromohexane, 3-bromo-1-propenyl benzene, 4,5-dibromodecane, 1-bromomethylbenzene, 3-bromophenol, and 4-bromo-2,6-dimethylbenzaniline. However, bromine compounds were not detected in the product oil, residue, or gas when hydrotalcite was added. After the thermolysis of the plastic, bromine compounds in the product oil may decrease because bromine was captured by the added hydrotalcite.

  7. Bromine and bromide content in soils: Analytical approach from total reflection X-ray fluorescence spectrometry.

    Science.gov (United States)

    Gallardo, Helena; Queralt, Ignasi; Tapias, Josefina; Candela, Lucila; Margui, Eva

    2016-08-01

    Monitoring total bromine and bromide concentrations in soils is significant in many environmental studies. Thus fast analytical methodologies that entail simple sample preparation and low-cost analyses are desired. In the present work, the possibilities and drawbacks of low-power total reflection X-ray fluorescence spectrometry (TXRF) for the determination of total bromine and bromide contents in soils were evaluated. The direct analysis of a solid suspension using 20 mg of fine ground soil (soils (Br content range in soils = 5-40 mg kg(-1)). Information about bromide determination in soils is also possible by analyzing the Br content in water soil extracts. In this case, the TXRF analysis can be directly performed by depositing 10 μL of the internal standardized soil extract sample on a quartz glass reflector in a measuring time of 1500 s. The bromide limit of detection by this approach was 10 μg L(-1). Good agreement was obtained between the TXRF results for the total bromine and bromide determinations in soils and those obtained by other popular analytical techniques, e.g. energy dispersive X-ray fluorescence spectrometry (total bromine) and ionic chromatography (bromide). As a study case, the TXRF method was applied to study bromine accumulation in two agricultural soils fumigated with a methyl bromide pesticide and irrigated with regenerated waste water. PMID:27179429

  8. Brominated Skeletal Components of the Marine Demosponges, Aplysina cavernicola and Ianthella basta: Analytical and Biochemical Investigations

    Directory of Open Access Journals (Sweden)

    Eike Brunner

    2013-04-01

    Full Text Available Demosponges possess a skeleton made of a composite material with various organic constituents and/or siliceous spicules. Chitin is an integral part of the skeleton of different sponges of the order Verongida. Moreover, sponges of the order Verongida, such as Aplysina cavernicola or Ianthella basta, are well-known for the biosynthesis of brominated tyrosine derivates, characteristic bioactive natural products. It has been unknown so far whether these compounds are exclusively present in the cellular matrix or whether they may also be incorporated into the chitin-based skeletons. In the present study, we therefore examined the skeletons of A. cavernicola and I. basta with respect to the presence of bromotyrosine metabolites. The chitin-based-skeletons isolated from these sponges indeed contain significant amounts of brominated compounds, which are not easily extractable from the skeletons by common solvents, such as MeOH, as shown by HPLC analyses in combination with NMR and IR spectroscopic measurements. Quantitative potentiometric analyses confirm that the skeleton-associated bromine mainly withstands the MeOH-based extraction. This observation suggests that the respective, but yet unidentified, brominated compounds are strongly bound to the sponge skeletons, possibly by covalent bonding. Moreover, gene fragments of halogenases suggested to be responsible for the incorporation of bromine into organic molecules could be amplified from DNA isolated from sponge samples enriched for sponge-associated bacteria.

  9. The NBS Reaction: A Simple Explanation for the Predominance of Allylic Substitution over Olefin Addition by Bromine at Low Concentrations.

    Science.gov (United States)

    Wamser, Carl C.; Scott, Lawrence T.

    1985-01-01

    Examines mechanisms related to use of N-bromosuccinimide (NBS) for bromination at an allylic position. Also presents derived rate laws for three possible reactions of molecular bromine with an alkene: (1) free radical substitution; (2) free radical addition; and (3) electrophilic addition. (JN)

  10. Determination of bromine contents in blood and hair of workers exposed to methyl by radioactivation analysis method bromide

    International Nuclear Information System (INIS)

    The bromine contained in blood and hair samples obtained from workers exposed to methyl bromide was analyzed by nondestructive activation analysis. The samples were irradiated for 1 min in pneumatic irradiation facility of Kyoto University research reactor with an estimated thermal neutron flux density at 2 x 1013 n.cm-2.sec-1. The irradiation was counted with Ge(Li) detector. The duration of measurement of radionuclide bromine in blood and hair was 200 sec within 2 - 10 min after irradiation. The bromine content of serum sample obtained from a worker suspected of methyl bromide poisoning was found to be 412 μg/g on 13 days apart from exposure to methyl bromide. The biological half-life of bromine in this case was found to be about 16 days. Then bromine contents in serum and hair samples obtained from workers exposed to methyl bromide were found to be 1.7 and 2.6 times higher respectively than those of nonexposed workers. Any correlations of bromine contents were not observed between serum and hair samples obtained from workers exposed to methyl bromide, nor between bromine amount in the serum of workers exposed to methyl bromide and the terms exposed to it, but statistically significant positive correlation was observed between bromine amount in the hair of workers exposed to methyl bromide and the terms exposed to it. (author)

  11. Bromination of Marine Dissolved Organic Matter following Full Scale Electrochemical Ballast Water Disinfection.

    Science.gov (United States)

    Gonsior, Michael; Mitchelmore, Carys; Heyes, Andrew; Harir, Mourad; Richardson, Susan D; Petty, William Tyler; Wright, David A; Schmitt-Kopplin, Philippe

    2015-08-01

    An extensively diverse array of brominated disinfection byproducts (DBPs) were generated following electrochemical disinfection of natural coastal/estuarine water, which is one of the main treatment methods currently under consideration for ballast water treatment. Ultra-high-resolution mass spectrometry revealed 462 distinct brominated DBPs at a relative abundance in the mass spectra of more than 1%. A brominated DBP with a relative abundance of almost 22% was identified as 2,2,4-tribromo-5-hydroxy-4-cyclopentene-1,3-dione, which is an analogue to several previously described 2,2,4-trihalo-5-hydroxy-4-cyclopentene-1,3-diones in drinking water. Several other brominated molecular formulas matched those of other known brominated DBPs, such as dibromomethane, which could be generated by decarboxylation of dibromoacetic acid during ionization, dibromophenol, dibromopropanoic acid, dibromobutanoic acid, bromohydroxybenzoic acid, bromophenylacetic acid, bromooxopentenoic acid, and dibromopentenedioic acid. Via comparison to previously described chlorine-containing analogues, bromophenylacetic acid, dibromooxopentenoic acid, and dibromopentenedioic acid were also identified. A novel compound at a 4% relative abundance was identified as tribromoethenesulfonate. This compound has not been previously described as a DBP, and its core structure of tribromoethene has been demonstrated to show toxicological implications. Here we show that electrochemical disinfection, suggested as a candidate for successful ballast water treatment, caused considerable production of some previously characterized DBPs in addition to novel brominated DBPs, although several hundred compounds remain structurally uncharacterized. Our results clearly demonstrate that electrochemical and potentially direct chlorination of ballast water in estuarine and marine systems should be approached with caution and the concentrations, fate, and toxicity of DBP need to be further characterized.

  12. Photochemical bromination of substituted indan-1-one derivatives: synthesis of new polybromoindan-1-one derivatives

    OpenAIRE

    KUŞ, Nermin Şimşek

    2009-01-01

    The photobromination of substituted indan derivatives was studied. Four products, 2,3-dibromo-inden-1-one (5), trans-2,3-dibromoindan-1-one (6), 2,2-dibromoindan-1,3-dione (7) and 2,2-dibromoindan-1-one (8), were obtained by the bromination of indan-1-one (4). The bromination of 2-methyl indanone (9) and 3-methyl-indanone (13) gave the corresponding monobromo, dibromo, and tribromo compounds in high yield. 4-Nitro indan (16) was tribrominated under same condition reaction. The stru...

  13. Effect of Brominated Furanones on the Formation of Biofilm by Escherichia coli on Polyvinyl Chloride Materials

    OpenAIRE

    Lianhua, Ye; Yunchao, Huang; Geng, Xu; Youquang, Zhou; Guangqiang, Zhao; Yujie, Lei

    2013-01-01

    To study the influence of brominated furanones on the biofilm (BF) formation by Escherichia coli (E. coli) on polyvinyl chloride (PVC) material, and to provide new ways of surface modification of materials to clinically prevent biomaterial centered infection. Three brominated furanones, dissolved in ethanol, furanone-1(3,4-dibromo-5-hydroxyl-furanone), furanone-2(4-bromo-5-(4-methoxypheny)-3-(methylamino)-furanone), and furanone-3(3,4-dibromo-5,5-dimethoxypheny-2(5H)-furanone) with representa...

  14. The development and characterization of ion exchange membranes for selected electrochemical power sources

    Science.gov (United States)

    Arnold, C., Jr.; Assink, R. A.

    The work is reviewed on the development and characterization of ion exchange membranes in an effort to improve the efficiency of three flowing electrolyte batteries. The batteries are: (1) NASA's iron chromium redox battery; (2) Lockheed's zinc ferricyanide battery; and (3) Johnson Control's zinc bromine battery. These batteries were developed for solar photovoltaic, utility load leveling, and electric vehicle applications, respectively.

  15. Bromine partitioning in the tropical tropopause layer: implications for stratospheric injection

    Directory of Open Access Journals (Sweden)

    R. P. Fernandez

    2014-07-01

    Full Text Available Very short-lived (VSL bromocarbons are produced at a prodigious rate by ocean biology and these source compounds (SGVSL, together with their degradation inorganic products (PGVSL, are lofted by vigorous convection to the tropical tropopause layer (TTL. Using a state-of-the-art photochemical mechanism within a global model, we calculate annual average stratospheric injection of total bromine due to VSL sources to be 5 pptv, with ~3 pptv entering the stratosphere as PGVSL and ~2 pptv as SGVSL. The geographic distribution and partitioning of VSL bromine within the TTL, and its consequent stratospheric injection, is highly dependent on the oceanic flux, the strength of convection and the occurrence of heterogeneous recycling reactions. Our calculations indicate atomic Br should be the dominant inorganic species in large regions of the TTL during daytime, due to the low ozone and cold conditions of this region. We propose the existence of a "tropical ring of atomic bromine" located approximately between 15 and 19 km and 30° N to 30° S. Daytime Br / BrO ratios of up to ~4 are predicted within the Br ring in regions of highly convective transport, such as the tropical Western Pacific. Then, we suggest experimental programs designed to quantify the bromine budget of the TTL and the stratospheric injection of VSL biogenic bromocarbons should include a strategy for the measurement of atomic Br during daytime and HOBr or BrCl during nighttime.

  16. Regioselective chlorination and bromination of unprotected anilines under mild conditions using copper halides in ionic liquids

    OpenAIRE

    Han Wang; Kun Wen; Nurbiya Nurahmat; Yan Shao; He Zhang; Chao Wei; Ya Li; Yongjia Shen; Zhihua Sun

    2012-01-01

    By using ionic liquids as solvents, the chlorination or bromination of unprotected anilines at the para-position can be achieved in high yields with copper halides under mild conditions, without the need for potentially hazardous operations such as supplementing oxygen or gaseous HCl.

  17. Regioselective chlorination and bromination of unprotected anilines under mild conditions using copper halides in ionic liquids

    Directory of Open Access Journals (Sweden)

    Han Wang

    2012-05-01

    Full Text Available By using ionic liquids as solvents, the chlorination or bromination of unprotected anilines at the para-position can be achieved in high yields with copper halides under mild conditions, without the need for potentially hazardous operations such as supplementing oxygen or gaseous HCl.

  18. Microbial degradation of the brominated flame retardant TBNPA by groundwater bacteria: laboratory and field study.

    Science.gov (United States)

    Balaban, Noa; Bernstein, Anat; Gelman, Faina; Ronen, Zeev

    2016-08-01

    In the present study, the biodegradation of the brominated flame retardant tribromoneopentylalcohol (TBNPA) by a groundwater enrichment culture was investigated using a dual carbon ((13)C/(12)C)- bromine ((81)Br/(79)Br) stable isotope analysis. An indigenous aerobic bacterial consortium was enriched from the polluted groundwater underlying an industrial site in the northern Negev Desert, Israel, where TBNPA is an abundant pollutant. Aerobic biodegradation was shown to be rapid, with complete debromination within a few days, whereas anaerobic biodegradation was not observed. Biodegradation under aerobic conditions was accompanied by a significant carbon isotope effect with an isotopic enrichment factor of ɛCbulk = -8.8‰ ± 1.5‰, without any detectable bromine isotope fractionation. It was found that molecular oxygen is necessary for biodegradation to occur, suggesting an initial oxidative step. Based on these results, it was proposed that H abstraction from the C-H bond is the first step of TBNPA biodegradation under aerobic conditions, and that the C-H bond cleavage results in the formation of unstable intermediates, which are rapidly debrominated. A preliminary isotopic analysis of TBNPA in the groundwater underlying the industrial area revealed that there are no changes in the carbon and bromine isotope ratio values downstream of the contamination source. Considering that anoxic conditions prevail in the groundwater of the contaminated site, the lack of isotope shifts in TBNPA indicates the lack of TBNPA biodegradation in the groundwater, in accordance with our findings. PMID:27183339

  19. METABOLISM OF BROMINATED FLAME RETARDANTS IN HUMAN ASTROCYTES AND EFFECTS ON THYROID HORMONE HOMEOSTASIS

    Science.gov (United States)

    In this proposed study, hydroxylated PBDEs and brominated phenols likely will be formed in astrocytes as a result of cytochrome p450-mediated metabolism. Previous studies have shown that polychlorinated biphenyls (PCBs) affect the regulation of thyroid hormones at the bloo...

  20. Photothermally induced bromination of carbon/polymer bipolar plate materials for fuel cell applications

    Science.gov (United States)

    Schade, Martin; Franzka, Steffen; Cappuccio, Franco; Peinecke, Volker; Heinzel, Angelika; Hartmann, Nils

    2015-05-01

    A facile photothermal procedure for direct functionalization of carbon/polymer bipolar plate materials is demonstrated. Through irradiation with a microfocused beam of an Ar+-laser at λ = 514 nm in gaseous bromine and distinct laser powers and pulse lengths local bromination of the carbon/polymer material takes place. At a 1/e spot diameter of 2.1 μm, functionalized surface areas with diameters down to 5 μm are fabricated. In complementary experiments large-area bromination is investigated using an ordinary tungsten lamp. For characterization contact angle goniometry, X-ray photoelectron spectroscopy and electron microscopy in conjunction with labeling techniques are employed. After irradiation bromine groups can easily be substituted by other chemical functionalities, e.g. azide and amine groups. This provides a facile approach in order to fabricate surface patterns and gradient structures with varying wetting characteristics. Mechanistic aspects and prospects of photothermal routines in micropatterning of carbon/polymer materials are discussed.

  1. XAS AND XPS CHARACTERIZATION OF MERCURY BINDING ON BROMINATED ACTIVATED CARBON

    Science.gov (United States)

    Brominated powdered activated carbon sorbents have been shown to e quite effective for mercury capture when injected into the flue gas duct at coal-fired power plants and are especially useful when buring Western low-chlorine subbituminous coals. X-ray absorption spectroscopy (X...

  2. On the bromination of the dihydroazulene/vinylheptafulvene photo-/thermoswitch

    DEFF Research Database (Denmark)

    Mazzanti, Virginia; Cacciarini, Martina; Broman, Søren Lindbæk;

    2012-01-01

    Background: The dihydroazulene (DHA)/vinylheptafulvene (VHF) system (with two cyano groups at C1) functions as a photo-/thermoswitch. Direct ionic bromination of DHA has previously furnished a regioselective route to a 7,8-dibromide, which by elimination was converted to a 7-bromo-substituted DHA...

  3. Canadian Arctic sea ice reconstructed from bromine in the Greenland NEEM ice core.

    Science.gov (United States)

    Spolaor, Andrea; Vallelonga, Paul; Turetta, Clara; Maffezzoli, Niccolò; Cozzi, Giulio; Gabrieli, Jacopo; Barbante, Carlo; Goto-Azuma, Kumiko; Saiz-Lopez, Alfonso; Cuevas, Carlos A; Dahl-Jensen, Dorthe

    2016-09-21

    Reconstructing the past variability of Arctic sea ice provides an essential context for recent multi-year sea ice decline, although few quantitative reconstructions cover the Holocene period prior to the earliest historical records 1,200 years ago. Photochemical recycling of bromine is observed over first-year, or seasonal, sea ice in so-called "bromine explosions" and we employ a 1-D chemistry transport model to quantify processes of bromine enrichment over first-year sea ice and depositional transport over multi-year sea ice and land ice. We report bromine enrichment in the Northwest Greenland Eemian NEEM ice core since the end of the Eemian interglacial 120,000 years ago, finding the maximum extension of first-year sea ice occurred approximately 9,000 years ago during the Holocene climate optimum, when Greenland temperatures were 2 to 3 °C above present values. First-year sea ice extent was lowest during the glacial stadials suggesting complete coverage of the Arctic Ocean by multi-year sea ice. These findings demonstrate a clear relationship between temperature and first-year sea ice extent in the Arctic and suggest multi-year sea ice will continue to decline as polar amplification drives Arctic temperatures beyond the 2 °C global average warming target of the recent COP21 Paris climate agreement.

  4. Bromine-82 Labelling of Human Serum Albumin, Insulin and Fibrinogen by Electrochemical Means

    International Nuclear Information System (INIS)

    The authors describe results obtained with a method using bromine-82 to label human serum albumin, fibrinogen and insulin, three organic substances of special importance in diagnostics and biological research. The method involves electrolytic bromination in an aqueous solution; this is performed in an electrolysis cell, whose anodic zone containing the substance to be labelled is partitioned from the cathodic zone by a dialysis membrane. For each of the three substances mentioned, the degree of bromination produced by a direct current (200, 200, 300 x 10-6 Å) was studied as a function of anode potential in 10-3 and 10-4 M solutions of NH4Br, the amount of bromine-labelled substance formed being checked by radio electrophoresis for various anodic potential values differing from each other by 50 mV. By immuno- electrophoresis it was ascertained that denaturation of albumin and fibrinogen only starts at anodic potential values for which the degree of labelling is already very high as compared with that yielded by chemical methods of labelling. The method here described has the advantage of rapid execution and is well suited to remote handling in a shielded zone. (author)

  5. In vitro profiling of the endocrine-disrupting potency of brominated flame retardants

    NARCIS (Netherlands)

    Hamers, T.H.M.; Kamstra, J.H.; Sonneveld, E.; Murk, A.J.; Kester, M.H.A.; Andersson, P.L.; Legler, J.; Brouwer, A.

    2006-01-01

    Over the last years, increasing evidence has become available that some brominated flame retardants (BFRs) may have endocrine disrupting (ED) potencies. The goal of the current study was to perform a systematic in vitro screening of the ED potencies of BFRs (1) to elucidate possible modes of action

  6. Molecular characterization of brominated persistent pollutants using extended X-ray absorption fine structure (EXAFS) spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Bergknut, Magnus; Skyllberg, Ulf [Swedish University of Agricultural Sciences (SLU), Department of Forest Ecology and Management, Umeaa (Sweden); Persson, Per [Umeaa University, Department of Chemistry, Umeaa (Sweden)

    2008-02-15

    X-ray absorption fine structure (EXAFS) spectroscopy spectra were collected for three brominated persistent pollutants: 6-bromo-2,4,5-trichlorophenol (BrTriClP), pentabromophenol (PentaBrP) and 3,3',5,5'-tetrabromobisphenol A (TBBA). The substances were selected to be symmetrical (BrTriClP and TBBA) or asymmetrical (PentaBrP) with respect to the atomic Br positions and to differ in the number of bromine and other halide atoms, as well as their relative positions. The asymmetrical PentaBrP was modelled with special detail as not all bromine atoms have identical coordination environments. The studied substances displayed unique EXAFS spectra, which could be used to determine the molecular structure in fair detail. We conclude that EXAFS spectroscopy is a suitable technique for molecular characterization of the comparatively complex molecules within the class of compounds of brominated organic persistent pollutants. A detailed understanding of the EXAFS spectra of the pure compounds opens up possibilities to study the interactions with soil and sediment matrices by means of EXAFS spectroscopy. (orig.)

  7. Deposition history of brominated flame retardant compounds in an ice core from Holtedahlfonna, Svalbard, Norway

    NARCIS (Netherlands)

    Hermanson, M.H.; Isaksson, E.; Forsström, S.; Teixeira, C.; Muir, D.C.G.; Pohjola, V.A.; van de Wal, R.S.W.

    2010-01-01

    Brominated flame retardants (BFRs) have been found in Arctic wildlife, lake sediment, and air. To identify the atmospheric BFR deposition history on Svalbard, Norway, we analyzed 19 BFRs, including hexabromocyclododecane (HBCD), 1,2-bis(2,4,6-tribromophenoxy)ethane (BTBPE), decabromodiphenyl ethane

  8. Kinetics of aerobic cometabolic biodegradation of chlorinated and brominated aliphatic hydrocarbons: A review.

    Science.gov (United States)

    Jesus, João; Frascari, Dario; Pozdniakova, Tatiana; Danko, Anthony S

    2016-05-15

    This review analyses kinetic studies of aerobic cometabolism (AC) of halogenated aliphatic hydrocarbons (HAHs) from 2001-2015 in order to (i) compare the different kinetic models proposed, (ii) analyse the estimated model parameters with a focus on novel HAHs and the identification of general trends, and (iii) identify further research needs. The results of this analysis show that aerobic cometabolism can degrade a wide range of HAHs, including HAHs that were not previously tested such as chlorinated propanes, highly chlorinated ethanes and brominated methanes and ethanes. The degree of chlorine mineralization was very high for the chlorinated HAHs. Bromine mineralization was not determined for studies with brominated aliphatics. The examined research period led to the identification of novel growth substrates of potentially high interest. Decreasing performance of aerobic cometabolism were found with increasing chlorination, indicating the high potential of aerobic cometabolism in the presence of medium- and low-halogenated HAHs. Further research is needed for the AC of brominated aliphatic hydrocarbons, the potential for biofilm aerobic cometabolism processes, HAH-HAH mutual inhibition and the identification of the enzymes responsible for each aerobic cometabolism process. Lastly, some indications for a possible standardization of future kinetic studies of HAH aerobic cometabolism are provided. PMID:26874310

  9. Toxicity of brominated flame retardants in fish, with emphasis on endocrine effects and reproduction

    NARCIS (Netherlands)

    Kuiper, R.V.

    2007-01-01

    Abstract The abundant use of brominated flame retardants (BFRs) in modern polymers has over the passed decades resulted in contamination of the environment, and BFRs are increasingly found in fish. Laboratory studies have shown that a number of BFRs and BFR-metabolites can interfere with thyroid and

  10. Brominated Flame Retardants in the Environment - The Price for our Convenience?

    NARCIS (Netherlands)

    Boer, de J.

    2004-01-01

    This paper reviews information on the occurrence of brominated flame retardants (BFRs) in various environmental compartments. The lack of information on BFRs other than pentabrominated diphenylethers (pentaBDEs) is emphasized, as well as the need for better analytical methods and the need for more t

  11. Brominated Flame Retardants and their metabolites: Novel insights into endocrine disruptive properties.

    NARCIS (Netherlands)

    Fernández Cantón, R.

    2008-01-01

    Brominated flame retardants (BFRs) are chemicals that are added to materials to inhibit or suppress ignition and are incorporated during the manufacture of e.g. electronic equipment, furniture, construction materials and textiles. BFRs have become an increasingly important group of organohalogen com

  12. Canadian Arctic sea ice reconstructed from bromine in the Greenland NEEM ice core

    Science.gov (United States)

    Spolaor, Andrea; Vallelonga, Paul; Turetta, Clara; Maffezzoli, Niccolò; Cozzi, Giulio; Gabrieli, Jacopo; Barbante, Carlo; Goto-Azuma, Kumiko; Saiz-Lopez, Alfonso; Cuevas, Carlos A.; Dahl-Jensen, Dorthe

    2016-01-01

    Reconstructing the past variability of Arctic sea ice provides an essential context for recent multi-year sea ice decline, although few quantitative reconstructions cover the Holocene period prior to the earliest historical records 1,200 years ago. Photochemical recycling of bromine is observed over first-year, or seasonal, sea ice in so-called “bromine explosions” and we employ a 1-D chemistry transport model to quantify processes of bromine enrichment over first-year sea ice and depositional transport over multi-year sea ice and land ice. We report bromine enrichment in the Northwest Greenland Eemian NEEM ice core since the end of the Eemian interglacial 120,000 years ago, finding the maximum extension of first-year sea ice occurred approximately 9,000 years ago during the Holocene climate optimum, when Greenland temperatures were 2 to 3 °C above present values. First-year sea ice extent was lowest during the glacial stadials suggesting complete coverage of the Arctic Ocean by multi-year sea ice. These findings demonstrate a clear relationship between temperature and first-year sea ice extent in the Arctic and suggest multi-year sea ice will continue to decline as polar amplification drives Arctic temperatures beyond the 2 °C global average warming target of the recent COP21 Paris climate agreement. PMID:27650478

  13. Thermoelectric properties of bromine filled CoSb3 skutterudite

    Energy Technology Data Exchange (ETDEWEB)

    Ortiz, Brenden R.; Crawford, Caitlin M.; McKinney, Robert W.; Parilla, Philip A.; Toberer, Eric S.

    2016-01-01

    Historically, the improved thermoelectric performance of skutterudite compounds has largely been driven by the incorporation of electropositive donors on interstitial sites. These 'rattlers' serve to optimize both electronic and thermal properties by tuning the carrier concentration and scattering phonons. In this work, we show that interstitial bromine can be incorporated into CoSb3 and assess the impact on electronic and thermal transport. In contrast to prior high pressure syntheses with iodine, interstitial bromine incorporation is achieved at ambient pressure. Transport properties are stable up to at least 375 degrees C. Bromine serves as an electronegative acceptor and can induce degenerate (>5 x 1019 cm-3) hole densities. In contrast to other p-type skutterudite compositions, bromine preserves the intrinsically high hole mobility of CoSb3 while significantly reducing the lattice thermal conductivity. The development of a stable p-type dopant for the interstitial filler site enables the development of skutterudites with both donor and acceptor interstitials to maximize phonon scattering while maintaining the high mobility of CoSb3.

  14. The Effects of Bromination Methods on the Microstructure of Brominated Natural Rubbers from Latex%溴化方式对胶乳法溴化天然橡胶结构的影响

    Institute of Scientific and Technical Information of China (English)

    赵法敏; 薛行华; 张子琦; 张利伟; 李光

    2013-01-01

    为改善溴化天然橡胶(BNR)的溶解性能,在胶乳法的基础上改变溴化方式,以常规溴化方式和分步溴化方式分别制备了BNR.通过实验发现,体系溴浓度相同时分步溴化方式的溴含量比常规溴化方式高,而凝胶含量较低,所以分步溴化方式在甲苯中的溶解性能较好.通过傅里叶红外光谱对样品进行表征,并使用核磁共振对其微观结构进行了定性定量分析.红外光谱分析表明,2种溴化方式制备的BNR产物均发生了一定程度的溴加成反应和溴取代反应;核磁共振的分析证实了在体系溴浓度较低的情况下,与胶乳法常规溴化相反,胶乳法分步溴化的溴化过程主要以溴加成反应为主,少量发生溴取代反应.%In order to improve the solubility property of the brominated natural rubbers (BNR)from latex, BNR were prepared by changing the bromination ways from conventional bromination to step bromination. Through the experiment, it was discovered that the bromine content of the latter was higher than the former, but the gel content was less under the same bromine concentration. The latter showed much better solubility in the solvent of toluene. The structure of the procured sample was characterized by Fourier transform infrared spectroscopy (FTIR), and the microstructures of brominated nature rubber were qualitatively and quantitatively analyzed by nuclear magnetic resonance (NMR). FTIR showed that there were both a degree of brominated addition reaction and brominated substitution reaction in the obtained BNR by two different methods; Contrary to the conventional bromination from latex, the analysis of NMR proved that the bromination process of step bromination from latex was mainly in the form of addition reaction, and only a small amount of the substitution reaction did occur.

  15. Bromine release from blowing snow and its impact on tropospheric chemistry

    Science.gov (United States)

    Griffiths, Paul; Yang, Xin; Abraham, N. Luke; Archibald, Alexander; Pyle, John

    2016-04-01

    In the last two decades, significant depletion of boundary layer ozone (ozone depletion events, ODEs) has been observed in both Arctic and Antarctic spring. ODEs are attributed to catalytic destruction by bromine radicals (Br plus BrO), especially during bromine explosion events (BEs), when high concentrations of BrO periodically occur. The source of bromine and the mechanism that sustains the high BrO levels are still the subject of study. Recent work by Pratt et al. (2013) posits Br2 production within saline snow and sea ice which leads to sudden ODEs. Previously, Yang et al. (2008) suggested snow could provide a source of (depleted) sea-salt aerosol if wicked from the surface of ice. They suggest that rapid depletion of bromide from the aerosol will constitute a source of photochemical Bry. Given the large sea ice extent in polar regions, this may constitute a significant source of sea salt and bromine in the polar lower atmosphere. While bromine release from blowing snow is perhaps less likely to trigger sudden ODEs, it may make a contribution to regional scale processes affecting ozone levels. Currently, the model parameterisations of Yang et al. assumes that rapid release of bromine occurs from fresh snow on sea ice during periods of strong wind. The parameterisation depends on an assumed sea-salt aerosol distribution generated via sublimation of the snow above the boundary layer, as well as taking into account the salinity of the snow. In this work, we draw on recent measurements by scientists from the British Antarctic Survey during a cruise aboard the Polarstern in the southern oceans. This has provided an extensive set of measurements of the chemical and physical characteristics of blowing snow over sea ice, and of the aerosol associated with it. Based on the observations, we have developed an improved parameterisation of the release of bromine from blowing snow. The paper presents results from the simulation performed using the United Kingdom Chemistry

  16. Interactions of bromine, chlorine, and iodine photochemistry during ozone depletions in Barrow, Alaska

    Directory of Open Access Journals (Sweden)

    C. R. Thompson

    2014-11-01

    Full Text Available The springtime depletion of tropospheric ozone in the Arctic is known to be caused by active halogen photochemistry resulting from halogen atom precursors emitted from snow, ice, or aerosol surfaces. The role of bromine in driving ozone depletion events (ODEs has been generally accepted, but much less is known about the role of chlorine radicals in ozone depletion chemistry. While the potential impact of iodine in the High Arctic is more uncertain, there have been indications of active iodine chemistry through observed enhancements in filterable iodide, probable detection of tropospheric IO, and recently, detection of atmospheric I2. Despite decades of research, significant uncertainty remains regarding the chemical mechanisms associated with the bromine-catalyzed depletion of ozone, as well as the complex interactions that occur in the polar boundary layer due to halogen chemistry. To investigate this, we developed a zero-dimensional photochemical model, constrained with measurements from the 2009 OASIS field campaign in Barrow, Alaska. We simulated a 7 day period during late March that included a full ozone depletion event lasting 3 days and subsequent ozone recovery to study the interactions of halogen radicals under these different conditions. In addition, the effects of iodine added to our base model were investigated. While bromine atoms were primarily responsible for ODEs, chlorine and iodine were found to enhance the depletion rates and iodine was found to be more efficient per atom at depleting ozone than Br. The interaction between chlorine and bromine is complex, as the presence of chlorine can increase the recycling and production of Br atoms, while also increasing reactive bromine sinks under certain conditions. Chlorine chemistry was also found to have significant impacts on both HO2 and RO2. The results of this work highlight the need for future studies on the production mechanisms of Br2 and Cl2, as well as on the potential

  17. Monitoring of WEEE plastics in regards to brominated flame retardants using handheld XRF

    Energy Technology Data Exchange (ETDEWEB)

    Aldrian, Alexia, E-mail: alexia.aldrian@unileoben.ac.at [Chair of Waste Processing Technology and Waste Management, Montanuniversitaet Leoben, Franz-Josef-Straße 18, 8700 Leoben (Austria); Ledersteger, Alfred, E-mail: a.ledersteger@saubermacher.at [Saubermacher Dienstleistungs AG, Hans-Roth-Straße 1, 8073 Feldkirchen bei Graz (Austria); Pomberger, Roland, E-mail: roland.pomberger@unileoben.ac.at [Chair of Waste Processing Technology and Waste Management, Montanuniversitaet Leoben, Franz-Josef-Straße 18, 8700 Leoben (Austria)

    2015-02-15

    Highlights: • Specification of an empirical factor for conversion from bromine to PBB and PBDE. • The handheld XRF device was validated for this particular application. • A very large number of over 4600 pieces of monitor housings was analysed. • The recyclable fraction mounts up to 85% for TV but only 53% of PC waste plastics. • A high percentage of pieces with bromine contents of over 50,000 ppm was obtained. - Abstract: This contribution is focused on the on-site determination of the bromine content in waste electrical and electronic equipment (WEEE), in particular waste plastics from television sets (TV) and personal computer monitors (PC) using a handheld X-ray fluorescence (XRF) device. The described approach allows the examination of samples in regards to the compliance with legal specifications for polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs) directly after disassembling and facilitates the sorting out of plastics with high contents of brominated flame retardants (BFRs). In all, over 3000 pieces of black (TV) and 1600 pieces of grey (PC) plastic waste were analysed with handheld XRF technique for this study. Especially noticeable was the high percentage of pieces with a bromine content of over 50,000 ppm for TV (7%) and PC (39%) waste plastics. The applied method was validated by comparing the data of handheld XRF with results obtained by GC–MS. The results showed the expected and sufficiently accurate correlation between these two methods. It is shown that handheld XRF technique is an effective tool for fast monitoring of large volumes of WEEE plastics in regards to BFRs for on-site measurements.

  18. Distribution of copper, silver and gold during thermal treatment with brominated flame retardants

    Energy Technology Data Exchange (ETDEWEB)

    Oleszek, Sylwia, E-mail: sylwia_oleszek@yahoo.com [Institute of Multidisciplinary Research for Advanced Materials (IMRAM), Tohoku University, 1,1 Katahira, 2-Chome, Sendai 980-8577 (Japan); Institute of Environmental Engineering of the Polish Academy of Sciences, 34 M. Sklodowska-Curie St., 41-819 Zabrze (Poland); Grabda, Mariusz, E-mail: mariusz@mail.tagen.tohoku.ac.jp [Institute of Multidisciplinary Research for Advanced Materials (IMRAM), Tohoku University, 1,1 Katahira, 2-Chome, Sendai 980-8577 (Japan); Institute of Environmental Engineering of the Polish Academy of Sciences, 34 M. Sklodowska-Curie St., 41-819 Zabrze (Poland); Shibata, Etsuro, E-mail: etsuro@tagen.tohoku.ac.jp [Institute of Multidisciplinary Research for Advanced Materials (IMRAM), Tohoku University, 1,1 Katahira, 2-Chome, Sendai 980-8577 (Japan); Nakamura, Takashi, E-mail: ntakashi@tagen.tohoku.ac.jp [Institute of Multidisciplinary Research for Advanced Materials (IMRAM), Tohoku University, 1,1 Katahira, 2-Chome, Sendai 980-8577 (Japan)

    2013-09-15

    Highlights: • Copper, silver and gold during thermal treatment with brominated flame retardants. • Distribution of copper, silver and gold during thermal processing. • Thermodynamic considerations of the bromination reactions. - Abstract: The growing consumption of electric and electronic equipment results in creating an increasing amount of electronic waste. The most economically and environmentally advantageous methods for the treatment and recycling of waste electric and electronic equipment (WEEE) are the thermal techniques such as direct combustion, co-combustion with plastic wastes, pyrolysis and gasification. Nowadays, this kind of waste is mainly thermally treated in incinerators (e.g. rotary kilns) to decompose the plastics present, and to concentrate metals in bottom ash. The concentrated metals (e.g. copper, precious metals) can be supplied as a secondary raw material to metal smelters, while the pyrolysis of plastics allows the recovery of fuel gases, volatilising agents and, eventually, energy. Indeed, WEEE, such as a printed circuit boards (PCBs) usually contains brominated flame retardants (BFRs). From these materials, hydrobromic acid (HBr) is formed as a product of their thermal decomposition. In the present work, the bromination was studied of copper, silver and gold by HBr, originating from BFRs, such as Tetrabromobisphenol A (TBBPA) and Tetrabromobisphenol A-Tetrabromobisophenol A diglycidyl ether (TTDE) polymer; possible volatilization of the bromides formed was monitored using a thermo-gravimetric analyzer (TGA) and a laboratory-scale furnace for treating samples of metals and BFRs under an inert atmosphere and at a wide range of temperatures. The results obtained indicate that up to about 50% of copper and silver can evolve from sample residues in the form of volatile CuBr and AgBr above 600 and 1000 °C, respectively. The reactions occur in the molten resin phase simultaneously with the decomposition of the brominated resin. Gold is

  19. A case study of a transported bromine explosion event in the Canadian high arctic

    Science.gov (United States)

    Zhao, X.; Strong, K.; Adams, C.; Schofield, R.; Yang, X.; Richter, A.; Friess, U.; Blechschmidt, A.-M.; Koo, J.-H.

    2016-01-01

    Ozone depletion events in the polar troposphere have been linked to extremely high concentrations of bromine, known as bromine explosion events (BEE). However, the optimum meteorological conditions for the occurrence of these events remain uncertain. On 4-5 April 2011, a combination of both blowing snow and a stable shallow boundary layer was observed during a BEE at Eureka, Canada (86.4°W, 80.1°N). Measurements made by a Multi-Axis Differential Optical Absorption Spectroscopy spectrometer were used to retrieve BrO profiles and partial columns. During this event, the near-surface BrO volume mixing ratio increased to ~20 parts per trillion by volume, while ozone was depleted to ~1 ppbv from the surface to 700 m. Back trajectories and Global Ozone Monitoring Experiment-2 satellite tropospheric BrO columns confirmed that this event originated from a bromine explosion over the Beaufort Sea. From 30 to 31 March, meteorological data showed high wind speeds (24 m/s) and elevated boundary layer heights (~800 m) over the Beaufort Sea. Long-distance transportation (~1800 km over 5 days) to Eureka indicated strong recycling of BrO within the bromine plume. This event was generally captured by a global chemistry-climate model when a sea-salt bromine source from blowing snow was included. A model sensitivity study indicated that the surface BrO at Eureka was controlled by both local photochemistry and boundary layer dynamics. Comparison of the model results with both ground-based and satellite measurements confirmed that the BEE observed at Eureka was triggered by transport of enhanced BrO from the Beaufort Sea followed by local production/recycling under stable atmospheric shallow boundary layer conditions.

  20. Interactions of bromine, chlorine, and iodine photochemistry during ozone depletions in Barrow, Alaska

    Science.gov (United States)

    Thompson, C. R.; Shepson, P. B.; Liao, J.; Huey, L. G.; Apel, E. C.; Cantrell, C. A.; Flocke, F.; Orlando, J.; Fried, A.; Hall, S. R.; Hornbrook, R. S.; Knapp, D. J.; Mauldin, R. L., III; Montzka, D. D.; Sive, B. C.; Ullmann, K.; Weibring, P.; Weinheimer, A.

    2015-08-01

    The springtime depletion of tropospheric ozone in the Arctic is known to be caused by active halogen photochemistry resulting from halogen atom precursors emitted from snow, ice, or aerosol surfaces. The role of bromine in driving ozone depletion events (ODEs) has been generally accepted, but much less is known about the role of chlorine radicals in ozone depletion chemistry. While the potential impact of iodine in the High Arctic is more uncertain, there have been indications of active iodine chemistry through observed enhancements in filterable iodide, probable detection of tropospheric IO, and recently, observation of snowpack photochemical production of I2. Despite decades of research, significant uncertainty remains regarding the chemical mechanisms associated with the bromine-catalyzed depletion of ozone, as well as the complex interactions that occur in the polar boundary layer due to halogen chemistry. To investigate this, we developed a zero-dimensional photochemical model, constrained with measurements from the 2009 OASIS field campaign in Barrow, Alaska. We simulated a 7-day period during late March that included a full ozone depletion event lasting 3 days and subsequent ozone recovery to study the interactions of halogen radicals under these different conditions. In addition, the effects of iodine added to our Base Model were investigated. While bromine atoms were primarily responsible for ODEs, chlorine and iodine were found to enhance the depletion rates and iodine was found to be more efficient per atom at depleting ozone than Br. The interaction between chlorine and bromine is complex, as the presence of chlorine can increase the recycling and production of Br atoms, while also increasing reactive bromine sinks under certain conditions. Chlorine chemistry was also found to have significant impacts on both HO2 and RO2, with organic compounds serving as the primary reaction partner for Cl atoms. The results of this work highlight the need for future

  1. Amines and ammonium compounds. CXCVIII. Reaction of ammonium salts containing a 2-alkynyl group with bromine and iodine

    Energy Technology Data Exchange (ETDEWEB)

    Gyul' nazaryan, A.K.; Khachatryan, N.G.; Saakyan, T.A.; Kinoyan, F.S.; Panosyan, G.A.; Babayan, A.T.

    1988-08-10

    The reactions of monoammonium, 1,4-and 1,5-bistertiaryammonium, and bisquaternary ammonium salts containing a 2-alkynyl group with bromine and iodine were studied. It was shown that these salts form molecular complexes with iodine and that addition of iodine at the triple bond does not occur. In reaction with bromine in all cases except 1,4-bistrimethylammonio-2-butyne dihalides one molecule of the halogen adds at the triple bond with the formation of salts containing the 2,3-dibromo-2-alkenyl group, which then form a 1:1 complex with bromine.

  2. The effect of bromination of carbon fibers on the coefficient of thermal expansion of graphite fiber-epoxy composites

    Science.gov (United States)

    Jaworske, D. A.; Maciag, C.

    1987-01-01

    To examine the effect of bromination of carbon fibers on the coefficient of thermal expansion (CTE) of carbon fiber epoxy composites, several pristine and brominated carbon fiber-epoxy composite samples were subjected to thermomechanical analysis. The CTE's of these samples were measured in the uniaxial and transverse directions. The CTE was dominated by the fibers in the uniaxial direction, while it was dominated by the matrix in the transverse directions. Bromination had no effect on the CTE of any of the composites. In addition, the CTE of fiber tow was measured in the absence of a polymer matrix, using an extension probe. The results from this technique were inconclusive.

  3. Global atmospheric model for mercury including oxidation by bromine atoms

    Directory of Open Access Journals (Sweden)

    C. D. Holmes

    2010-12-01

    Full Text Available Global models of atmospheric mercury generally assume that gas-phase OH and ozone are the main oxidants converting Hg0 to HgII and thus driving mercury deposition to ecosystems. However, thermodynamic considerations argue against the importance of these reactions. We demonstrate here the viability of atomic bromine (Br as an alternative Hg0 oxidant. We conduct a global 3-D simulation with the GEOS-Chem model assuming gas-phase Br to be the sole Hg0 oxidant (Hg + Br model and compare to the previous version of the model with OH and ozone as the sole oxidants (Hg + OH/O3 model. We specify global 3-D Br concentration fields based on our best understanding of tropospheric and stratospheric Br chemistry. In both the Hg + Br and Hg + OH/O3 models, we add an aqueous photochemical reduction of HgII in cloud to impose a tropospheric lifetime for mercury of 6.5 months against deposition, as needed to reconcile observed total gaseous mercury (TGM concentrations with current estimates of anthropogenic emissions. This added reduction would not be necessary in the Hg + Br model if we adjusted the Br oxidation kinetics downward within their range of uncertainty. We find that the Hg + Br and Hg + OH/O3 models are equally capable of reproducing the spatial distribution of TGM and its seasonal cycle at northern mid-latitudes. The Hg + Br model shows a steeper decline of TGM concentrations from the tropics to southern mid-latitudes. Only the Hg + Br model can reproduce the springtime depletion and summer rebound of TGM observed at polar sites; the snowpack component of GEOS-Chem suggests that 40% of HgII deposited to snow in the Arctic is transferred to the ocean and land reservoirs, amounting to a net deposition flux to the Arctic of 60 Mg a−1. Summertime events of depleted Hg0 at Antarctic sites due to subsidence are much better simulated by

  4. Global atmospheric model for mercury including oxidation by bromine atoms

    Directory of Open Access Journals (Sweden)

    C. D. Holmes

    2010-08-01

    Full Text Available Global models of atmospheric mercury generally assume that OH and ozone are the main oxidants converting Hg0 to HgII and thus driving mercury deposition to ecosystems. However, thermodynamic considerations argue against the importance of these reactions. We demonstrate here the viability of atomic bromine (Br as an alternative Hg0 oxidant. We conduct a global 3-D simulation with the GEOS-Chem model assuming Br to be the sole Hg0 oxidant (Hg + Br model and compare to the previous version of the model with OH and ozone as the sole oxidants (Hg + OH/O3 model. We specify global 3-D Br concentration fields based on our best understanding of tropospheric and stratospheric Br chemistry. In both the Hg + Br and Hg + OH/O3 models, we add an aqueous photochemical reduction of HgII in cloud to impose a tropospheric lifetime for mercury of 6.5 months against deposition, as needed to reconcile observed total gaseous mercury (TGM concentrations with current estimates of anthropogenic emissions. This added reduction would not be necessary in the Hg + Br model if we adjusted the Br oxidation kinetics downward within their range of uncertainty. We find that the Hg + Br and Hg + OH/O3 models are equally capable of reproducing the spatial distribution of TGM and its seasonal cycle at northern mid-latitudes. The Hg + Br model shows a steeper decline of TGM concentrations from the tropics to southern mid-latitudes. Only the Hg + Br model can reproduce the springtime depletion and summer rebound of TGM observed at polar sites; the snowpack component of GEOS-Chem suggests that 40% of HgII deposited to snow in the Arctic is transferred to the ocean and land reservoirs, amounting to a net deposition flux of 60 Mg a−1. Summertime events of depleted Hg0 at Antarctic sites due to subsidence are much better simulated by the Hg + Br model. Model

  5. Combustion and inorganic bromine emission of waste printed circuit boards in a high temperature furnace

    International Nuclear Information System (INIS)

    Highlights: ► The combustion efficiency of waste printed circuit boards (PCBs) depends on temperature, excess air factor, and high temperature zone residence time. Temperature has the most significant impact. Under the proposed condition, combustion of waste PCBs alone is quite complete within the furnace. ► High temperature prompts a more complete bromine release and conversion. When temperature is high enough, 99.9% organobrominated compounds, the potential precursors for brominated dixoins formation, are destroyed efficiently and convert to inorganic bromine in flue gas, as HBr and Br2. ► Temperature has crucial influence over the inhibition of HBr conversion to Br2, while the oxygen partial pressure plays a reverse role in the conversion to a very small extent. Increasing temperature will decrease the volume percentage ratio of Br2/HBr in flue gas greatly. ► The thermodynamic equilibrium approach of bromine conversion was investigated. The two forms of inorganic bromine in flue gas substantially reach thermodynamic equilibrium within 0.25 s. Under the proposed operating condition, the reaction of Br transfer and conversion finish. - Abstract: High temperature combustion experiments of waste printed circuit boards (PCBs) were conducted using a lab-scale system featuring a continuously-fed drop tube furnace. Combustion efficiency and the occurrence of inorganic bromine (HBr and Br2) were systematically studied by monitoring the main combustion products continuously. The influence of furnace temperature (T) was studied from 800 to 1400 °C, the excess air factor (EAF) was varied from 1.2 to 1.9 and the residence time in the high temperature zone (RTHT) was set at 0.25, 0.5, or 0.75 s. Combustion efficiency depends on temperature, EAF and RTHT; temperature has the most significant effect. Conversion of organic bromine from flame retardants into HBr and Br2 depends on temperature and EAF. Temperature has crucial influence over the ratio of HBr to Br2

  6. Hydroxylated polybrominated diphenyl ethers exhibit different activities on thyroid hormone receptors depending on their degree of bromination

    Energy Technology Data Exchange (ETDEWEB)

    Ren, Xiao-Min, E-mail: rxm200318@gmail.com; Guo, Liang-Hong, E-mail: LHGuo@rcees.ac.cn; Gao, Yu, E-mail: francesscototti@gmail.com; Zhang, Bin-Tian, E-mail: nktianster@gmail.com; Wan, Bin, E-mail: binwan@rcees.ac.cn

    2013-05-01

    Polybrominated diphenyl ethers (PBDEs) have been shown to disrupt thyroid hormone (TH) functions in experimental animals, and one of the proposed disruption mechanisms is direct binding of hydroxylated PBDE (OH-PBDE) to TH receptors (TRs). However, previous data on TH receptor binding and TH activity of OH-PBDEs were very limited and sometimes inconsistent. In the present paper, we examined the binding potency of ten OH-PBDEs with different degrees of bromination to TR using a fluorescence competitive binding assay. The results showed that the ten OH-PBDEs bound to TR with potency that correlated to their bromination level. We further examined their effect on TR using a coactivator binding assay and GH3 cell proliferation assay. Different TR activities of OH-PBDEs were observed depending on their degree of bromination. Four low-brominated OH-PBDEs (2′-OH-BDE-28, 3′-OH-BDE-28, 5-OH-BDE-47, 6-OH-BDE-47) were found to be TR agonists, which recruited the coactivator peptide and enhanced GH3 cell proliferation. However, three high-brominated OH-PBDEs (3-OH-BDE-100, 3′-OH-BDE-154, 4-OH-BDE-188) were tested to be antagonists. Molecular docking was employed to simulate the interactions of OH-PBDEs with TR and identify the structural determinants for TR binding and activity. According to the docking results, low-brominated OH-PBDEs, which are weak binders but TR agonists, bind with TR at the inner side of its binding pocket, whereas high-brominated compounds, which are potent binders but TR antagonists, reside at the outer region. These results indicate that OH-PBDEs have different activities on TR (agonistic or antagonistic), possibly due to their different binding geometries with the receptor. - Highlights: ► Thyroid hormone (TH) activity of OH-PBDEs with different Br number was evaluated. ► Four different experimental approaches were employed to investigate the mechanism. ► Low-brominated OH-PBDEs were agonists, but high-brominated ones were antagonists.

  7. The effect of representing bromine from VSLS on the simulation and evolution of Antarctic ozone

    Science.gov (United States)

    Oman, Luke D.; Douglass, Anne R.; Salawitch, Ross J.; Canty, Timothy P.; Ziemke, Jerald R.; Manyin, Michael

    2016-09-01

    We use the Goddard Earth Observing System Chemistry-Climate Model, a contributor to both the 2010 and 2014 World Meteorological Organization Ozone Assessment Reports, to show that inclusion of 5 parts per trillion (ppt) of stratospheric bromine (Bry) from very short lived substances (VSLS) is responsible for about a decade delay in ozone hole recovery. These results partially explain the significantly later recovery of Antarctic ozone noted in the 2014 report, as bromine from VSLS was not included in the 2010 Assessment. We show multiple lines of evidence that simulations that account for VSLS Bry are in better agreement with both total column BrO and the seasonal evolution of Antarctic ozone reported by the Ozone Monitoring Instrument on NASA's Aura satellite. In addition, the near-zero ozone levels observed in the deep Antarctic lower stratospheric polar vortex are only reproduced in a simulation that includes this Bry source from VSLS.

  8. Stratospheric ozone depletion and future levels of atmospheric chlorine and bromine

    Science.gov (United States)

    Prather, Michael J.; Watson, Robert T.

    1990-01-01

    The rise in atmospheric chlorine levels caused by the emission of chlorofluorocarbons and other halocarbons is thought to be the main cause of the appearance of the Antarctic ozone 'hole' in the late 1970s, and the more modest ozone depletion observed over parts of the Northern Hemisphere. Atmospheric bromine, also associated with halocarbon emissions, is believed to contribute to ozone depletion. Over the next decade, further increases in these compounds are inevitable. Model calculations show that by the end of the next century, atmospheric chlorine and bromine levels may return to those prevalent before the onset of the ozone hole, but only if more stringent regulations are applied to halocarbon production than those currently proposed.

  9. Co-doping of Potassium and Bromine in Carbon Nanotubes: A Density Functional Theory Study

    Institute of Scientific and Technical Information of China (English)

    XIAO Yong; YAN xiao-Hong; DING Jian-Wen

    2007-01-01

    We investigate the co-doping of potassium and bromine in singlewalled carbon nanotubes (SWCNTs)and doublewalled carbon nanotubes(DWCNTs)based on density functional theory.In the co-doped(6,O)SWCNTs,the 4s electron of potassium is transferred to nanotube and Br,leading to the n-type feature of SWCNTs.When potassium is intercalated into inner tube and bromine is put on outer tube,the positive and negative charges reside on the outer and inner tubes of the(7.0)@(16,0)DWCNT,respectively.It is expected that DWCNTs would be an ideal candidate for p-n junction and diode applications.

  10. Occupational exposure to brominated flame retardants : With emphasis on polybrominated diphenyl ethers

    OpenAIRE

    Thuresson, Kaj

    2004-01-01

    Brominated flame retardants (BFRs) are a diverse group of chemicals, which are used to slow down or inhibit the development of fires. BFRs are incorporated into a wide range of consumer products that are considered as potential fire hazards, such as TV-sets, household appliances, computers, and textiles. The production and use of BFRs is extensive and consists of mainly tetrabromobisphenol A (TBBPA), polybrominated diphenyl ethers (PBDEs) and hexabromocyclododecan (HBCD). BFRs in general, but...

  11. Ship-source pollution by polychlorinated biphenyls and brominated flame retardants

    OpenAIRE

    ČULIN, Jelena; Bielić, Toni

    2015-01-01

    Polychlorinated biphenyls (PCBs) and brominated flame retardants (BFRs) are groups of anthropogenic contaminants that have been routinely used in many applications for several decades. Prior to the discovery of their detrimental health effects and subsequent implementation of regulatory measures they were widely applied in shipbuilding. They are still found onboard active and inactive ships and pose a risk to human and environment. Therefore, it is important to continue to carry out preven...

  12. A comparison of the virucidal properties of chlorine, chlorine dioxide, bromine chloride and iodine.

    OpenAIRE

    Taylor, G R; Butler, M

    1982-01-01

    Chlorine dioxide, bromine chloride and iodine were compared with chlorine as virucidal agents. Under optimal conditions all disinfectants were effective at low concentrations, but each disinfectant responded differently to acidity and alkalinity. Disinfection by chlorine was impaired by the presence of ammonia, but the other disinfectants retained much of their potency. Disinfection of poliovirus by iodine resulted in structural changes in the virions as seen by electron micrroscopy, but the ...

  13. Bromine monoxide / sulphur dioxide ratios in relation to volcanological observations at Mt. Etna 2006–2009

    OpenAIRE

    N. Bobrowski; Giuffrida, G

    2012-01-01

    Over a 3-yr period, from 2006 to 2009, frequent scattered sunlight DOAS measurements were conducted at Mt. Etna at a distance of around 6 km downwind from the summit craters. During the same period and in addition to these measurements, volcanic observations were made by regularly visiting various parts of Mt. Etna. Here, results from these measurements and observations are presented and their relation is discussed. The focus of the investigation is the bromine monoxide/sulphur dioxide (BrO ...

  14. Mercury oxidation from bromine chemistry in the free troposphere over the southeastern US

    OpenAIRE

    S. Coburn; Dix, B.; Edgerton, E.; Holmes, C. D; Kinnison, D.; Liang, Q; A. ter Schure; Wang, S.; R. Volkamer

    2015-01-01

    The elevated deposition of atmospheric mercury over the Southeastern United States is currently not well understood. Here we measure partial columns and vertical profiles of bromine monoxide (BrO) radicals, a key component of mercury oxidation chemistry, to better understand the processes and altitudes at which mercury is being oxidized in the atmosphere. We use the data from a ground-based MAX-DOAS instrument located at a coastal site ~ 1 km from the Gulf o...

  15. Tropospheric bromine chemistry: implications for present and pre-industrial ozone and mercury

    Directory of Open Access Journals (Sweden)

    J. P. Parrella

    2012-04-01

    Full Text Available We present a new model for the global tropospheric chemistry of inorganic bromine (Bry coupled to oxidant-aerosol chemistry in the GEOS-Chem chemical transport model (CTM. Sources of tropospheric Bry include debromination of sea-salt aerosol, photolysis and oxidation of short-lived bromocarbons, and transport from the stratosphere. Comparison to a GOME-2 satellite climatology of tropospheric BrO columns shows that the model can reproduce the observed increase of BrO with latitude, the northern mid-latitudes maximum in winter, and the Arctic maximum in spring. This successful simulation is contingent on the HOBr + HBr reaction taking place in aqueous aerosols and ice clouds. Bromine chemistry in the model decreases tropospheric ozone concentrations by <1−8 nmol mol−1 (6.5% globally, with the largest effects in the northern extratropics in spring. The global mean tropospheric OH concentration decreases by 4%. Inclusion of bromine chemistry improves the ability of global models (GEOS-Chem and p-TOMCAT to simulate observed 19th-century ozone and its seasonality. Bromine effects on tropospheric ozone are comparable in the present-day and pre-industrial atmospheres so that estimates of anthropogenic radiative forcing are minimally affected. Br atom concentrations are 40% higher in the pre-industrial atmosphere due to lower ozone, which would decrease by a factor of 2 the atmospheric lifetime of elemental mercury against oxidation by Br. This suggests that historical anthropogenic mercury emissions may have mostly deposited to northern mid-latitudes, enriching the corresponding surface reservoirs. The persistent rise in background surface ozone at northern mid-latitudes during the past decades could possibly contribute to the observations of elevated mercury in subsurface waters of the North Atlantic.

  16. Tropospheric bromine chemistry: implications for present and pre-industrial ozone and mercury

    Directory of Open Access Journals (Sweden)

    J. P. Parrella

    2012-08-01

    Full Text Available We present a new model for the global tropospheric chemistry of inorganic bromine (Bry coupled to oxidant-aerosol chemistry in the GEOS-Chem chemical transport model (CTM. Sources of tropospheric Bry include debromination of sea-salt aerosol, photolysis and oxidation of short-lived bromocarbons, and transport from the stratosphere. Comparison to a GOME-2 satellite climatology of tropospheric BrO columns shows that the model can reproduce the observed increase of BrO with latitude, the northern mid-latitudes maximum in winter, and the Arctic maximum in spring. This successful simulation is contingent on the HOBr + HBr reaction taking place in aqueous aerosols and ice clouds. Bromine chemistry in the model decreases tropospheric ozone mixing ratios by <1–8 nmol mol−1 (6.5% globally, with the largest effects in the northern extratropics in spring. The global mean tropospheric OH concentration decreases by 4%. Inclusion of bromine chemistry improves the ability of global models (GEOS-Chem and p-TOMCAT to simulate observed 19th-century ozone and its seasonality. Bromine effects on tropospheric ozone are comparable in the present-day and pre-industrial atmospheres so that estimates of anthropogenic radiative forcing are minimally affected. Br atom concentrations are 40% higher in the pre-industrial atmosphere due to lower ozone, which would decrease by a factor of 2 the atmospheric lifetime of elemental mercury against oxidation by Br. This suggests that historical anthropogenic mercury emissions may have mostly deposited to northern mid-latitudes, enriching the corresponding surface reservoirs. The persistent rise in background surface ozone at northern mid-latitudes during the past decades could possibly contribute to the observations of elevated mercury in subsurface waters of the North Atlantic.

  17. Toxicity of brominated flame retardants with focus on retinoid system disturbances

    OpenAIRE

    Litens Karlsson, Sabina

    2015-01-01

    Background: Brominated flame retardants (BFR) are detected in the environment and biota all over the world. They contribute to the human body burden of industrial chemicals and exposure is mainly via food. Indoor dust contributes substantially in some exposure situations, which involve small children. Regulatory restrictions and bans have been introduced as some BFRs can impact proper development, potentially via the endocrine system. Objectives: The study aim was to clarify the role of...

  18. Bromine-catalyzed conversion of CO2 and epoxides to cyclic carbonates under continuous flow conditions.

    Science.gov (United States)

    Kozak, Jennifer A; Wu, Jie; Su, Xiao; Simeon, Fritz; Hatton, T Alan; Jamison, Timothy F

    2013-12-11

    A continuous method for the formation of cyclic carbonates from epoxides and carbon dioxide (CO2) is described. The catalysts used are inexpensive and effective in converting the reagents to the products in a residence time (t(R)) of 30 min. The cyclic carbonate products are obtained in good to excellent yield (51-92%). On the basis of a series of kinetics experiments, we propose a reaction mechanism involving epoxide activation by electrophilic bromine and CO2 activation by an amide.

  19. Detailed modeling of the atmospheric degradation mechanism of very-short lived brominated species

    OpenAIRE

    G. Krysztofiak; Catoire, Valéry; Poulet, G.; Marécal, V.; Pirre, Michel; Louis, F.; Canneaux, S.; B. Josse

    2012-01-01

    International audience Detailed chemical reaction schemes for the atmospheric degradations of the very short-lived species (VSLS) bromoform (CHBr3) and dibromomethane (CH2Br2) have been established. These degradation schemes have been implemented in the meteorological/tracer transport model CATT-BRAMS used in the present case as pseudo one-dimensional model with chemistry of CH4, CO, HOx, NOx, NOy and Ox. They include the main possible reactions of the intermediate brominated peroxy radica...

  20. Brominated and organophosphate flame retardants in selected consumer products on the Japanese market in 2008

    Energy Technology Data Exchange (ETDEWEB)

    Kajiwara, Natsuko, E-mail: kajiwara.natsuko@nies.go.jp [Research Center for Material Cycles and Waste Management, National Institute for Environmental Studies, 16-2 Onogawa, Tsukuba, Ibaraki 305-8506 (Japan); Noma, Yukio; Takigami, Hidetaka [Research Center for Material Cycles and Waste Management, National Institute for Environmental Studies, 16-2 Onogawa, Tsukuba, Ibaraki 305-8506 (Japan)

    2011-09-15

    Highlights: {yields} We examined the flame retardants in electronics, curtains, wallpaper and insulator. {yields} Use of alternative brominated and organophosphate flame retardants was suggested. {yields} All the products investigated also contained PBDEs, TBBPA and polybromophenols. {yields} Incorporation of recycled materials containing hazardous substance was suggested. - Abstract: The concentrations of traditional brominated flame retardants (BFRs) and organophosphate flame retardants (OPFRs) in new consumer products, including electronic equipment, curtains, wallpaper, and building materials, on the Japanese market in 2008 were investigated. Although some components of the electronic equipment contained bromine at concentrations on the order of percent by weight, as indicated by X-ray fluorescence analysis, the bromine content could not be fully accounted for by the BFRs analyzed in this study, which included polybrominated diphenylethers, decabromodiphenyl ethane, tetrabromobisphenol A, polybromophenols, and hexabromocyclododecanes. These results suggest the use of alternative BFRs such as newly developed formulations derived from tribromophenol, tetrabromobisphenol A, or both. Among the 11 OPFRs analyzed, triphenylphosphate was present at the highest concentrations in all the products investigated, which suggests the use of condensed-type OPFRs as alternative flame retardants, because they contain triphenylphosphate as an impurity. Tripropylphosphate was not detected in any samples; and trimethylphosphate, tributyl tris(2-butoxyethyl)phosphate, and tris(1,3-dichloro-2-propyl)phosphate were detected in only some components and at low concentrations. Note that all the consumer products evaluated in this study also contained traditional BFRs in amounts that were inadequate to impart flame retardancy, which implies the incorporation of recycled plastic materials containing BFRs that are of global concern.

  1. Reactive airways dysfunction and systemic complaints after mass exposure to bromine.

    OpenAIRE

    Woolf, A; Shannon, M.

    1999-01-01

    Occasionally children are the victims of mass poisoning from an environmental contaminant that occurs due to an unexpected common point source of exposure. In many cases the contaminant is a widely used chemical generally considered to be safe. In the following case, members of a sports team visiting a community for an athletic event were exposed to chemicals while staying at a local motel. Bromine-based sanitizing agents and other chemicals such as hydrochloric acid, which were used in exces...

  2. Interactions of bromine, chlorine, and iodine photochemistry during ozone depletions in Barrow, Alaska

    OpenAIRE

    Thompson, C. R.; P. B. Shepson; Liao, J.; Huey, L.G.; E. C. Apel; Cantrell, C. A.; Flocke, F.; Orlando, J.; Fried, A.; Hall, S. R; R. S. Hornbrook; D. J. Knapp; Mauldin III, R. L; Montzka, D. D.; B. C. Sive

    2014-01-01

    The springtime depletion of tropospheric ozone in the Arctic is known to be caused by active halogen photochemistry resulting from halogen atom precursors emitted from snow, ice, or aerosol surfaces. The role of bromine in driving ozone depletion events (ODEs) has been generally accepted, but much less is known about the role of chlorine radicals in ozone depletion chemistry. While the potential impact of iodine in the High Arctic is more uncertain, there ha...

  3. Interactions of bromine, chlorine, and iodine photochemistry during ozone depletions in Barrow, Alaska

    OpenAIRE

    Thompson, C. R.; P. B. Shepson; Liao, J.; Huey, L.G.; E. C. Apel; Cantrell, C. A.; Flocke, F.; Orlando, J.; Fried, A.; Hall, S. R; R. S. Hornbrook; D. J. Knapp; Mauldin III, R. L; Montzka, D. D.; B. C. Sive

    2015-01-01

    The springtime depletion of tropospheric ozone in the Arctic is known to be caused by active halogen photochemistry resulting from halogen atom precursors emitted from snow, ice, or aerosol surfaces. The role of bromine in driving ozone depletion events (ODEs) has been generally accepted, but much less is known about the role of chlorine radicals in ozone depletion chemistry. While the potential impact of iodine in the High Arctic is more uncertain, there have been indicatio...

  4. Brominated and organophosphate flame retardants in selected consumer products on the Japanese market in 2008

    International Nuclear Information System (INIS)

    Highlights: → We examined the flame retardants in electronics, curtains, wallpaper and insulator. → Use of alternative brominated and organophosphate flame retardants was suggested. → All the products investigated also contained PBDEs, TBBPA and polybromophenols. → Incorporation of recycled materials containing hazardous substance was suggested. - Abstract: The concentrations of traditional brominated flame retardants (BFRs) and organophosphate flame retardants (OPFRs) in new consumer products, including electronic equipment, curtains, wallpaper, and building materials, on the Japanese market in 2008 were investigated. Although some components of the electronic equipment contained bromine at concentrations on the order of percent by weight, as indicated by X-ray fluorescence analysis, the bromine content could not be fully accounted for by the BFRs analyzed in this study, which included polybrominated diphenylethers, decabromodiphenyl ethane, tetrabromobisphenol A, polybromophenols, and hexabromocyclododecanes. These results suggest the use of alternative BFRs such as newly developed formulations derived from tribromophenol, tetrabromobisphenol A, or both. Among the 11 OPFRs analyzed, triphenylphosphate was present at the highest concentrations in all the products investigated, which suggests the use of condensed-type OPFRs as alternative flame retardants, because they contain triphenylphosphate as an impurity. Tripropylphosphate was not detected in any samples; and trimethylphosphate, tributyl tris(2-butoxyethyl)phosphate, and tris(1,3-dichloro-2-propyl)phosphate were detected in only some components and at low concentrations. Note that all the consumer products evaluated in this study also contained traditional BFRs in amounts that were inadequate to impart flame retardancy, which implies the incorporation of recycled plastic materials containing BFRs that are of global concern.

  5. On bromine, nitrogen oxides and ozone depletion in the tropospheric plume of Erebus volcano (Antarctica)

    OpenAIRE

    Boichu, Marie; Oppenheimer, Clive; Roberts, Tjarda J.; V. I. Tsanev; Kyle, Philip R

    2011-01-01

    International audience Since the discovery of bromine oxide (BrO) in volcanic emissions, there has been speculation concerning its role in chemical evolution and notably ozone depletion in volcanic plumes. We report the first measurements using Differential Optical Absorption Spectroscopy (DOAS) of BrO in the tropospheric plume of the persistently degassing Erebus volcano (Antarctica). These are the first observations pertaining to emissions from an alkaline phonolitic magma. The observed ...

  6. Iodine and Bromine speciation in snow and the effect of elevation

    Directory of Open Access Journals (Sweden)

    B. S. Gilfedder

    2007-01-01

    Full Text Available Iodine is an essential trace element for all mammals and may also influence climate through new aerosol formation. Atmospheric bromine cycling is also important due to its well-known ozone depletion capabilities. Despite precipitation being the ultimate source of iodine in the terrestrial environment, the processes effecting the distribution, speciation and transport of these elements are relatively unknown. The aim of this study was to determine the effect of orographic lifting on iodine concentrations and also quantify inorganic and organic iodine and bromine species. Snow samples were collected over an altitude profile (~800 m from the northern Black Forest and were analysed (IC-ICP-MS for iodine and bromine species and trace metals (ICP-MS. All elements and species showed a significant (r2>0.65 inverse relationship with altitude despite the short (5 km horizontal distance of the transect. In fact, total iodine more than halved (38 to 13 nmol/l over the 800 m height change. The results suggest that orographic lifting of cloud masses has a major influence on iodine levels in precipitation and is perhaps more important than lateral distances in determining iodine concentrations in terrestrial precipitation. The microphysical removal process was common to all elements. We also show that organically bound iodine is the dominant iodine species in snow (61–75%, followed by iodide. Iodate was only found in two samples despite a detection limit of 0.3 nmol/l. Two unknown but most likely anionic organo-I species were also identified in IC-ICP-MS chromatograms and comprised 2–10% of the total iodine. The majority of the bromine was inorganic bromide with a max.~of 32% organo-Br.

  7. Thermal Recycling of Brominated Flame Retardants with Fe2O3.

    Science.gov (United States)

    Altarawneh, Mohammednoor; Ahmed, Oday H; Jiang, Zhong-Tao; Dlugogorski, Bogdan Z

    2016-08-01

    Plastics containing brominated flame retardants (BFRs) constitute the major fraction of nonmetallic content in e-waste. Co-pyrolysis of BFRs with hematite (Fe2O3) represents a viable option for the thermal recycling of BFRs. Consensus of experimental findings confirms the excellent bromine fixation ability of Fe2O3 and the subsequent formation of iron bromides. This contribution provides a comprehensive mechanistic account of the primary reactions between a cluster model of Fe2O3 and major bromine-bearing products from the decomposition of tetrabromobisphenol A (TBBA), the most commonly deployed BFR. We estimate the thermo-kinetic parameters for interactions of Fe2O3 with HBr, brominated alkanes and alkenes, bromobenzene, and bromophenol. Dissociative addition of HBr at a Fe-O bond proceeds through a trivial barrier of 8.2 kcal/mol with fitted parameters in the Arrhenius equation of k(T) = 7.96 × 10(11) exp(-6400/RT) s(-1). The facile and irreversible nature for HBr addition to Fe2O3 accords with the experimentally reported 90% reduction in HBr emission when Fe2O3 interacts with TBBA pyrolysates. A detailed kinetic analysis indicates that, transformation of Fe2O3 into iron bromides and oxybromides occurs via successive addition of HBr to Fe(Br)-O(H) entities. Elimination of a water molecule proceeds through an intramolecular H transfer. A direct elimination one-step mechanism operates in the dehydrohalogenation of bromoethane into ethene over Fe2O3. Dissociative decomposition and direct elimination channels assume comparable reaction rates in formation of acetylene from vinyl bromide. Results from this study provide an atomic-based insight into a promising thermal recycling route of e-waste. PMID:27366936

  8. Brominating activity of the seaweed Ascophyllum nodosum: Impact on the biosphere

    Energy Technology Data Exchange (ETDEWEB)

    Wever, R.; Tromp, M.G.M.; Krenn, B.E.; Marjani, A.; Van Tol, M. (Univ. of Amsterdam (Netherlands))

    1991-03-01

    Macroalgae are an important source of volatile halogenated organic compounds, such as bromoform and dibromomethane. The mechanism by which these compounds are formed is still elusive. The authors report that the brown seaweeds Laminaria saccharina, Laminaria digitata, Fucus vesiculosis, Pelvetia canaliculata, and Ascophyllum nodosum and the red seaweeds Chondrus crispus and Plocamium hamatum contain bromoperoxidases. The intact plants are able to brominate exogeneous organic compounds when H{sub 2}O{sub 2} and Br{sup {minus}} are added to seawater. Further, the authors show that the brominating activity of the brown macroalga A. nodosum, which contains a vanadium bromoperoxidase located on the thallus surface, occurs when the plant is exposed to light and not in the dark. The rate of bromination of exogenous organic compounds in seawater by this plant is 68 nmol (g of wet alga){sup {minus}1} h{sup {minus}1}. HOBr is a strong biocidal agent and the authors propose that the formation of HOBr by this seaweed is part of a host defense system.

  9. Discrimination of hexabromocyclododecane from new polymeric brominated flame retardant in polystyrene foam by nuclear magnetic resonance.

    Science.gov (United States)

    Jeannerat, Damien; Pupier, Marion; Schweizer, Sébastien; Mitrev, Yavor Nikolaev; Favreau, Philippe; Kohler, Marcel

    2016-02-01

    Hexabromocyclododecane (HBCDD) is a brominated flame retardant (BFR) and major additive to polystyrene foam thermal insulation that has recently been listed as a persistent organic pollutant by the Stockholm Convention. During a 2013/2014 field analytical survey, we measured HBCDD content ranging from 0.2 to 2.4% by weight in 98 polystyrene samples. Liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) analyses indicated that expandable (EPS) and extruded (XPS) polystyrene foams significantly differed in the α/γ HBCDD isomer ratio, with a majority of α and γ isomers in XPS and EPS, respectively. Interestingly, this technique indicated that some recent materials did not contain HBCDD, but demonstrated bromine content when analysed with X-ray fluorescence (XRF). Further investigation by Nuclear Magnetic Resonance (NMR) was able to discriminate between the BFRs present. In addition to confirming the absence or presence of HBCDD in polystyrene samples, high-field NMR spectroscopy provided evidence of the use of brominated butadiene styrene (BBS) as copolymer in the production of polystyrene. Use of this alternative flame retardant is expected to cause fewer health and environmental concerns. Our results highlight a trend towards the use of copolymerized BFRs as an alternative to HBCDD in polystyrene foam boards. In addition to providing a rapid NMR method to identify polymeric BFR, our analytical approach is a simple method to discriminate between flame-retardants in polystyrene foam insulating materials.

  10. Heterogeneous processing of bromine compounds by atmospheric aerosols: Relation to the ozone budget

    Energy Technology Data Exchange (ETDEWEB)

    Robinson, J.M.; Henson, B.F.; Dubey, M.K.; Casson, J.L.; Johal, M.S. [Los Alamos National Lab., NM (US); Wilson, K.R. [Univ. of California, Berkeley, CA (US)

    1998-11-01

    This is the final report of a three-year, Laboratory Directed Research and Development (LDRD) project at Los Alamos National Laboratory (LANL). The depletion of ozone, particularly above Antarctica, has been investigated extensively to formulate public policy on the use of halocarbons. While it has been shown that heterogeneous reactions of chlorine compounds on stratospheric particulates cause the ozone hole, little is known of the analogous bromine mechanisms, even though it has been recognized for two decades that catalytic destruction of ozone by bromine could be more efficient than chlorine. Furthermore, field measurements and modeling calculations suggest that these heterogeneous (gas/surface) reactions are not restricted to the Antarctic regions but occur globally. The authors have performed laboratory measurements of the uptake of bromine compounds and other halogens on simulated stratospheric aerosols to help elucidate their role in catalytic ozone destruction cycles. Their studies contribute to the data base required to make assessments of the effects of human activities on global change, including the Montreal Protocol.

  11. Effects of Assistant Solvents and Mixing Intensity on the Bromination Process of Butyl Rubber

    Institute of Scientific and Technical Information of China (English)

    王伟; 邹海魁; 初广文; 向阳; 彭晗; 陈建峰

    2014-01-01

    A slow bromination process of butyl rubber (IIR) suffers from low efficiency and low selectivity (S) of target-product. To obtain suitable approach to intensify the process, effects of assistant solvents and mixing inten-sity on the bromination process were systemically studied in this paper. The reaction process was found constantly accelerated with the increasing dosage and polarity of assistant solvent. Hexane with 30%(by volume) dichloro-methane was found as the suitable solvent component, where the stable conversion of 1,4-isoprene transferring to target product (xA1s) of 80.2%and the corresponding S of 91.2%were obtained in 5 min. The accelerated reaction process was demonstrated being remarkably affected by mixing intensity until the optimal stirring rate of 1100 r·min-1 in a stirred tank reactor. With better mixing condition, a further intensification of the process was achieved in a ro-tating packed bed (RPB) reactor, where xA1s of 82.6% and S of 91.9% were obtained in 2 min. The usage of the suitable solvent component and RPB has potential application in the industrial bromination process intensification.

  12. Monitoring of WEEE plastics in regards to brominated flame retardants using handheld XRF.

    Science.gov (United States)

    Aldrian, Alexia; Ledersteger, Alfred; Pomberger, Roland

    2015-02-01

    This contribution is focused on the on-site determination of the bromine content in waste electrical and electronic equipment (WEEE), in particular waste plastics from television sets (TV) and personal computer monitors (PC) using a handheld X-ray fluorescence (XRF) device. The described approach allows the examination of samples in regards to the compliance with legal specifications for polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs) directly after disassembling and facilitates the sorting out of plastics with high contents of brominated flame retardants (BFRs). In all, over 3000 pieces of black (TV) and 1600 pieces of grey (PC) plastic waste were analysed with handheld XRF technique for this study. Especially noticeable was the high percentage of pieces with a bromine content of over 50,000ppm for TV (7%) and PC (39%) waste plastics. The applied method was validated by comparing the data of handheld XRF with results obtained by GC-MS. The results showed the expected and sufficiently accurate correlation between these two methods. It is shown that handheld XRF technique is an effective tool for fast monitoring of large volumes of WEEE plastics in regards to BFRs for on-site measurements. PMID:25464945

  13. A satellite based study of tropospheric bromine explosion events and their linkages to polar cyclone development

    Science.gov (United States)

    Blechschmidt, Anne-Marlene; Richter, Andreas; Burrows, John P.; Kaleschke, Lars; Strong, Kimberly; Theys, Nicolas; Weber, Mark; Zhao, Xiaoyi; Zien, Achim; Hodges, Kevin I.

    2016-04-01

    Intense, cyclone-like shaped plumes of tropospheric bromine monoxide (BrO) are regularly observed by the UV-vis satellite instruments GOME-2/MetOp-A and SCIAMACHY/Envisat over Arctic and Antarctic sea ice in polar spring. The plumes are associated with an autocatalytic chemical chain reaction involving tropospheric ozone depletion and initiated by the release of bromine from cold brine-covered ice or snow to the atmosphere. This influences atmospheric chemistry as it affects the oxidising capacity of the troposphere through OH production and may also influence the local weather/temperature of the polar atmosphere, as ozone is a major greenhouse gas. Here, we make combined use of satellite retrievals and numerical model simulations to study individual BrO plume cases in the polar atmosphere. In agreement with previous studies, our analysis shows that the plumes are often transported by high latitude cyclones, sometimes over several days despite the short atmospheric lifetime of BrO. Moreover, general characteristics of bromine explosion events linked to transport by polar weather systems, such as frequency, spatial distribution and favourable weather conditions are derived based on a new detection method. Our results show that BrO cyclone transport events are by far more common in the Antarctic than in the Arctic.

  14. Effect of Bromine Substitution on Human Dermal Absorption of Polybrominated Diphenyl Ethers.

    Science.gov (United States)

    Abdallah, Mohamed Abou-Elwafa; Pawar, Gopal; Harrad, Stuart

    2015-09-15

    Human dermal absorption of eight mono- to deca-brominated diphenyl ethers (PBDEs) was investigated for the first time using EPISKIN human skin equivalent tissue. Using a standard in vitro protocol, EPISKIN tissues mounted in specially designed diffusion cells were exposed to the target PBDEs for 24 h. Estimated steady-state flux (Jss) and permeation coefficients (Papp) across the skin increased with decreasing bromine substitution from BDE-153 (Papp = 4.0 × 10(-4) cm/h) to BDE-1 (Papp = 1.1 × 10(-2) cm/h). This was accompanied by an increase in the time required to traverse the skin tissue into the receptor fluid (lag time) from 0.25 h for BDE-1 to 1.26 h for BDE-153. Papp values for the studied PBDEs were correlated significantly (P water solubility and log KOW. While less brominated congeners achieved faster dermal penetration, higher PBDEs displayed greater accumulation within the skin tissue. The PBDEs thus accumulated represent a contaminant depot from which they may be slowly released to the systemic circulation over a prolonged period. Maximal percutaneous penetration was observed for BDE-1 (∼ 30% of the applied 500 ng/cm(2) dose). Interestingly, BDE-183 and BDE-209 showed very low dermal absorption, exemplified by a failure to reach the steady state within the 24 h exposure period that was studied. PMID:26301594

  15. Bromine recovery in residual solutions generated in the 15 N isotopic determination methodology (Rittenberg, 1946)

    International Nuclear Information System (INIS)

    The isotopic determination of 15 N (Rittenberg, 1946) is a methodology used in the Laboratory of Isotope Stable (CENA/USP). In this procedure, in the oxidation of nitrogen species for N2, solution of Li Br O is used, generating as residue 50 L y-1 of solution contends Li Br and Li Br O. Seeking to recover the bromine contained in that residue, very toxic substance, a special line was built composed by reaction balloons (1 and 2 liters), addition funnel, gas flow regulator and connections in glass. In the system proposed, after the acidification (sulfuric acid) of the alkaline residual solution, the liberated bromine (Br2) it was then dragged by flow of nitrogen and reacted with solution of LiOH. That reaction facilitated the production of Li Br O in solution (Efficiency = 82±2%), that was reused later on same analytic procedure. The high cost of the liquid bromine is another attractiveness that corroborates the employment of the developed procedure. They took place isotopic determinations using the recovered solutions and prepared, and the observed values didn't show statistical difference (T test of Student). The presented procedure is part of the Management Program of Chemical Residues of CENA/USP, which seeks to destine the residues of responsibility of the institution appropriately, forming professionals to the practices of environmental management. (author)

  16. Discrimination of hexabromocyclododecane from new polymeric brominated flame retardant in polystyrene foam by nuclear magnetic resonance.

    Science.gov (United States)

    Jeannerat, Damien; Pupier, Marion; Schweizer, Sébastien; Mitrev, Yavor Nikolaev; Favreau, Philippe; Kohler, Marcel

    2016-02-01

    Hexabromocyclododecane (HBCDD) is a brominated flame retardant (BFR) and major additive to polystyrene foam thermal insulation that has recently been listed as a persistent organic pollutant by the Stockholm Convention. During a 2013/2014 field analytical survey, we measured HBCDD content ranging from 0.2 to 2.4% by weight in 98 polystyrene samples. Liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) analyses indicated that expandable (EPS) and extruded (XPS) polystyrene foams significantly differed in the α/γ HBCDD isomer ratio, with a majority of α and γ isomers in XPS and EPS, respectively. Interestingly, this technique indicated that some recent materials did not contain HBCDD, but demonstrated bromine content when analysed with X-ray fluorescence (XRF). Further investigation by Nuclear Magnetic Resonance (NMR) was able to discriminate between the BFRs present. In addition to confirming the absence or presence of HBCDD in polystyrene samples, high-field NMR spectroscopy provided evidence of the use of brominated butadiene styrene (BBS) as copolymer in the production of polystyrene. Use of this alternative flame retardant is expected to cause fewer health and environmental concerns. Our results highlight a trend towards the use of copolymerized BFRs as an alternative to HBCDD in polystyrene foam boards. In addition to providing a rapid NMR method to identify polymeric BFR, our analytical approach is a simple method to discriminate between flame-retardants in polystyrene foam insulating materials. PMID:26492426

  17. Mechanochemical conversion of brominated POPs into useful oxybromides: a greener approach

    Science.gov (United States)

    Cagnetta, Giovanni; Liu, Han; Zhang, Kunlun; Huang, Jun; Wang, Bin; Deng, Shubo; Wang, Yujue; Yu, Gang

    2016-06-01

    Brominated organic pollutants are considered of great concern for their adverse effect on human health and the environment, so an increasing number of such compounds are being classified as persistent organic pollutants (POPs). Mechanochemical destruction is a promising technology for POPs safe disposal because it can achieve their complete carbonization by solvent-free high energy ball milling at room temperature. However, a large amount of co-milling reagent usually is necessary, so a considerable volume of residue is produced. In the present study a different approach to POPs mechanochemical destruction is proposed. Employing stoichiometric quantities of Bi2O3 or La2O3 as co-milling reagent, brominated POPs are selectively and completely converted into their corresponding oxybromides (i.e. BiOBr and LaOBr), which possess very peculiar properties and can be used for some actual and many more potential applications. In this way, bromine is beneficially reused in the final product, while POPs carbon skeleton is safely destroyed to amorphous carbon. Moreover, mechanochemical destruction is employed in a greener and more sustainable manner.

  18. MISCIBILITY AND MORPHOLOGY OF THIN FILMS OF BLENDS OF POLYSTYRENE WITH BROMINATED POLYSTYRENES: EFFECTS OF VARYING THE MOLECULAR WEIGHT,BROMINATION DEGREE AND ANNEALING

    Institute of Scientific and Technical Information of China (English)

    Rui Song; De-bin Yang; Ling-hao He; Guang-tao Yao

    2006-01-01

    Thin films of incompatible polymer blends can form a variety of structures during preparation and subsequent annealing process. For the polymer blend system consisting of polystyrene and poly(styrene-co-p-bromo-styrene), I.e.,PS/PBrxS, its compatibility could be adjusted by varying the degree of bromination and the molecular weight of both components comprised. In this paper, surface chemical compositions of the cast and the annealing films were investigated by X-ray photoelectron spectroscopy (XPS) and contact angle measurement; meanwhile, surface topographical changes are followed by atomic force microscopy (AFM). In addition, substantial attention was paid to the effect of annealing on the morphologic variations induced by phase separation and/or dewetting of the thin film. Moreover, the influences of the molecular weight, Mw, as well as the brominated degree, x%, on the sample surface are explored systematically, and the corresponding observations are explained in virtue of the Flory-Huggins theory, along with the dewetting of the polymer thin film.

  19. Bromine monoxide / sulphur dioxide ratios in relation to volcanological observations at Mt. Etna 2006–2009

    Directory of Open Access Journals (Sweden)

    G. Giuffrida

    2012-12-01

    Full Text Available Over a 3-yr period, from 2006 to 2009, frequent scattered sunlight DOAS measurements were conducted at Mt. Etna at a distance of around 6 km downwind from the summit craters. During the same period and in addition to these measurements, volcanic observations were made by regularly visiting various parts of Mt. Etna. Here, results from these measurements and observations are presented and their relation is discussed. The focus of the investigation is the bromine monoxide/sulphur dioxide (BrO / SO2 ratio, and its variability in relation to volcanic processes. That the halogen/sulphur ratio can serve as a precursor or indicator for the onset of eruptive activity was already proposed by earlier works (e.g. Noguchi and Kamiya 1963; Menyailov, 1975; Pennisi and Cloarec, 1998; Aiuppa et al., 2002. However, there is still a limited understanding today because of the complexity with which halogens are released, depending on magma composition and degassing conditions. Our understanding of these processes is far from complete, for example of the rate and mechanism of bubble nucleation, growth and ascent in silicate melts (Carroll and Holloway, 1994, the halogen vapour-melt partitioning and the volatile diffusivity in the melt (Aiuppa et al., 2009. With this study we aim to add one more piece to the puzzle of what halogen/sulphur ratios might tell about volcanic activities. Our data set shows an increase of the BrO / SO2 ratio several weeks prior to an eruption, followed by a decline before and during the initial phase of eruptive activities. Towards the end of activity or shortly thereafter, the ratio increases to baseline values again and remains more or less constant during quiet phases. To explain the observed evolution of the BrO / SO2 ratio, a first empirical model is proposed. This model suggests that bromine, unlike chlorine and fluorine, is less soluble in the magmatic melt than sulphur. By using the DOAS method to determine SO2, we actually

  20. Surface Snowpack Key to Bromine Activation in a Changing Arctic Environment

    Science.gov (United States)

    Pratt, Kerri; Custard, Kyle; Shepson, Paul; Douglas, Thomas; Pöhler, Denis; Stephan, General; Zielcke, Johannes; Simpson, William; Platt, Ulrich; von Glasow, Roland; Tanner, David; Huey, L. Gregory; Carlsen, Mark; Stirm, Brian

    2013-04-01

    Arctic sea ice is rapidly declining and transforming from a multiyear ice pack to thinner, more saline, seasonal ice, which has important implications for Arctic atmospheric composition. Following springtime polar sunrise, "ozone depletion events", attributed to bromine chemistry, lead to episodic decreases in lower tropospheric ozone concentrations to near zero, concurrent with mercury depletion and deposition. Despite our increasing understanding of the spatial variability of BrO and possible reaction pathways based on laboratory studies, important questions remain regarding the most efficient sources of and mechanisms for Arctic halogen activation. During the March-April 2012 BRomine, Ozone, and Mercury EXperiment (BROMEX) in Barrow, Alaska, outdoor chamber experiments with snow and ice samples were conducted. Ozone was added as the precursor oxidant, and the samples were investigated with and without ambient sunlight. Samples included first-year sea ice, brine icicles, several layers of snow above first-year sea ice, and seasonal snow above the tundra. Chemical ionization mass spectrometry was utilized to monitor Br2 production. Tundra snow and surface snow above sea ice produced the most Br2, with no production resulting from sea ice and basal snow directly above sea ice. Overall, the most efficient Br2 production was observed from snow samples characterized by lower pH and higher bromide/chloride ratios. Br2 was only observed in the presence of sunlight, indicating the role of snowpack photochemical reactions and the hydroxyl radical in its production. Br2 production via the surface snowpack explains previously-observed BrO enhancements above sea ice, as well as observations of inland tundra hotspots in measured BrO by aircraft-based nadir MAX-DOAS (Multi Axis-Differential Optical Absorption Spectroscopy) measurements, conducted during BROMEX. The findings indicate that atmospherically processed snow is likely a major source of Arctic bromine release, which

  1. Brominated flame retardants and organochlorine pollutants in eggs of little owls (Athene noctua) from Belgium

    Energy Technology Data Exchange (ETDEWEB)

    Jaspers, Veerle [Department of Biology, University of Antwerp, Campus Drie Eiken, Universiteitsplein 1, 2610 Wilrijk (Belgium); Covaci, Adrian [Toxicological Centre, University of Antwerp, Campus Drie Eiken, Universiteitsplein 1, 2610 Wilrijk (Belgium)]. E-mail: adrian.covaci@ua.ac.be; Maervoet, Johan [Toxicological Centre, University of Antwerp, Campus Drie Eiken, Universiteitsplein 1, 2610 Wilrijk (Belgium); Dauwe, Tom [Department of Biology, University of Antwerp, Campus Drie Eiken, Universiteitsplein 1, 2610 Wilrijk (Belgium); Voorspoels, Stefan [Toxicological Centre, University of Antwerp, Campus Drie Eiken, Universiteitsplein 1, 2610 Wilrijk (Belgium); Schepens, Paul [Toxicological Centre, University of Antwerp, Campus Drie Eiken, Universiteitsplein 1, 2610 Wilrijk (Belgium); Eens, Marcel [Department of Biology, University of Antwerp, Campus Drie Eiken, Universiteitsplein 1, 2610 Wilrijk (Belgium)

    2005-07-15

    Residues of brominated diphenylethers (PBDEs), organochlorinated pesticides (OCPs) and polychlorinated biphenyls (PCBs) were measured in 40 eggs of little owls (Athene noctua), a terrestrial top predator from Belgium. The major organohalogens detected were PCBs (median 2,600 ng/g lipid, range 790-23000 ng/g lipid). PCB 153,138/163, 170, 180 and 187 were the predominant congeners and constituted 71% of total sum PCBs. PBDEs were measurable in all samples, but their concentrations were much lower than for PCBs, with a range from 29-572 ng/g lipid (median 108 ng/g lipid). The most prevalent PBDE congeners in little owl egg samples were BDE 47, 99 and 153. This profile differs from the profile in marine bird species, for which BDE 47 was the dominant congener, indicating that terrestrial birds may be more exposed to higher brominated BDE congeners than marine birds. The fully brominated BDE 209 could be detected in one egg sample (17 ng/g lipid), suggesting that higher brominated BDEs may accumulate in terrestrial food chains. Brominated biphenyl (BB) 153 was determined in all egg samples, with levels ranging from 0.6 to 5.6 ng/g lipid (median 1.3 ng/g lipid). Additionally, hexabromocyclododecane (HBCD) could be identified and quantified in only two eggs at levels of 20 and 50 ng/g lipid. OCPs were present at low concentrations, suggesting a rather low contamination of the sampled environment with OCPs (median concentrations of sum DDTs: 826 ng/g lipid, sum chlordanes: 1,016 ng/g lipid, sum HCHs: 273 ng/g lipid). Hexachlorobenzene (HCB) and octachlorostyrene (OCS) were also found at low median levels of 134 and 3.4 ng/g lipid, respectively. Concentrations of most analytes were significantly higher in eggs collected from deserted nests in comparison to addled (unhatched) eggs, while eggshell thickness did not differ between deserted and addled eggs. No significant correlations were found between eggshell thickness and the analysed organohalogens. - PBDEs are measurable

  2. Formation and distribution of disinfection by-products during chlorine disinfection in the presence of bromide ion

    Institute of Scientific and Technical Information of China (English)

    LI Bo; QU JiuHui; LIU HuiJuan; ZHAO Xu

    2008-01-01

    The influences of contact time and pH value on the formation and distribution of four species of triha-lomethanes and five species of haloacetic acids during chlorination in the presence of bromine were investigated. Results showed that the distribution of molar fraction of trihalomethanes varied with contact time due to the change of bromide ion concentration during chlorination. Most of the triha-lomethanes comprising bromine-containing species and the favored products of the haloacetic acids were chlorine-containing species after 24 h of chlorination. The extent of bromine incorporation in tri-halomethanes and haloacetic acids both decreased with time. The contact time also had influence on the formation rate of different species of haloacetic acids. The formation and distribution of triha-lomethanes and haloacetic acids strongly depended on the chlorination pH value. All of the triha-lomethanes species formation increased with the increase of pH value except the bromoform that had not been detected. The molar fraction of bromodichloromethane and dibromochloromethane contain-ing bromine increased with pH value while chloroform without bromine decreased. Under the pH range studied in this experiment, the predominant haloacetic acids species were trichloroacetic acid and dichloroacetic acid which all decreased with the increase of pH value and the level of TCAA was higher than that of DCAA.

  3. Assessment of PCDD/F and PBDD/F Emissions from Coal-fired Power Plants during Injection of Brominated Activated Carbon for Mercury Control

    Science.gov (United States)

    The effect of the injection of brominated powdered activated carbon (Br-PAC) on the emission of brominated and chlorinated dioxins and furans in coal combustion flue gas has been evaluated. The tests were performed at two U.S. Department of Energy (DOE) demonstration sites where ...

  4. Hyphenation of ultra performance liquid chromatography (UPLC) with inductively coupled plasma mass spectrometry (ICP-MS) for fast analysis of bromine containing preservatives

    DEFF Research Database (Denmark)

    Bendahl, Lars; Hansen, Steen Honoré; Gammelgaard, Bente;

    2006-01-01

    Ultra performance liquid chromatography (UPLC) was coupled to inductively coupled plasma mass spectrometry (ICP-MS) for fast analysis of three bromine-containing preservatives, monitoring the 79Br and 81Br isotopes simultaneously. Due to the efficiency of the 1.7 microm column packing material...... analysis of bromine-containing preservatives in commercially available cosmetic products....

  5. Molecular simulations and density functional theory calculations of bromine in clathrate hydrate phases

    International Nuclear Information System (INIS)

    Bromine forms a tetragonal clathrate hydrate structure (TS-I) very rarely observed in clathrate hydrates of other guest substances. The detailed structure, energetics, and dynamics of Br2 and Cl2 in TS-I and cubic structure I (CS-I) clathrate hydrates are studied in this work using molecular dynamics and quantum chemical calculations. X-ray diffraction studies show that the halogen-water–oxygen distances in the cages of these structures are shorter than the sum of the van der Waals radii of halogen and oxygen atoms. This suggests that the stabilizing effects of halogen bonding or other non-covalent interactions (NCIs) may contribute to the formation of the unique tetragonal bromine hydrate structure. We performed molecular dynamics simulations of Br2 and Cl2 clathrate hydrates using our previously developed five-site charge models for the dihalogen molecules [Dureckova et al. Can. J. Chem. 93, 864 (2015)] which reproduce the computed electrostatic potentials of the dihalogens and account for the electropositive σ-hole of the halogen bond donor (the dihalogen). Analysis of the radial distribution functions, enthalpies of encapsulation, velocity and orientation autocorrelation functions, and polar angle distributions are carried out for Br2 and Cl2 guests in various cages to contrast the properties of these guests in the TS-I and CS-I phases. Quantum chemical partial geometry optimizations of Br2 and Cl2 guests in the hydrate cages using the M06-2X functional give short halogen-water distances compatible with values observed in X-ray diffraction experiments. NCI plots of guest-cage structures are generated to qualitatively show the relative strength of the non-bonding interactions between dihalogens and water molecules. The differences between behaviors of Br2 and Cl2 guests in the hydrate cages may explain why bromine forms the unique TS-I phase

  6. Production of HBR from bromine and steam for off-peak electrolytic hydrogen generation

    Energy Technology Data Exchange (ETDEWEB)

    Schlief, R.E.; Hanrahan, R.J.; Stoy, M.A. [Univ. of Florida, Gainesville, FL (United States)] [and others

    1995-09-01

    Progress is reported on the development of a renewable energy source based solar-electrolytic system for production of hydrogen and oxygen. It employs water, bromine, solar energy and supplemental electrical power. The concept is being developed by Solar Reactor Technologies, Inc., (SRT), with the U.S. Department of Energy (DOE). An overview of the nature and objectives of this program is provided here, and technical progress made during the first (three-month) performance period of the Phase I work effort is reported. The SRT concept entails (1) absorption of concentrated solar radiation by bromine vapor Br{sub 2(g)} in a high-temperature reactor producing Br{sub (g)} atoms, (2) reaction of Br{sub (g)} with water yielding hydrogen bromide (HBr), and (3) electrolysis of stored hydrogen bromide for production of H{sub 2(g)} and recovery of Br{sub 2(I)}. Incorporation of solar radiation in the primary photochemical step (1) reduces by 50 - 70% the electrical power required to split water. The SRT concept is very attractive from an economic viewpoint as well. The reversible fuel cell, employed in the SRT electrolysis concept is capitalized via its use in load leveling by the utility. A 1 kW solar reactor was designed and constructed during the first three-month performance period by SRT personnel at the University of Florida, Gainesville. It was employed in taking survey data of the reaction between bromine and steam at temperatures between 900 and 1300 K. This reaction was run under purely thermal conditions, i.e. in the absence of solar photons. The experimental data are reported and interpreted employing concomitant thermodynamic calculations. The anticipated improvement is discussed briefly as well as the effect of a photochemical boost to the reaction. The amount of this enhancement will be studied in the next three month performance period.

  7. Effect of brominated furanones on the formation of biofilm by Escherichia coli on polyvinyl chloride materials.

    Science.gov (United States)

    Lianhua, Ye; Yunchao, Huang; Geng, Xu; Youquang, Zhou; Guangqiang, Zhao; Yujie, Lei

    2013-01-01

    To study the influence of brominated furanones on the biofilm (BF) formation by Escherichia coli (E. coli) on polyvinyl chloride (PVC) material, and to provide new ways of surface modification of materials to clinically prevent biomaterial centered infection. Three brominated furanones, dissolved in ethanol, furanone-1(3,4-dibromo-5-hydroxyl-furanone), furanone-2(4-bromo-5-(4-methoxypheny)-3-(methylamino)-furanone), and furanone-3(3,4-dibromo-5,5-dimethoxypheny-2(5H)-furanone) with representative chemical structure, were coated on the surfaces of separate PVC materials (1 × 1 cm), respectively. The surface-modified PVC materials were incubated with E. coli and for controls, 75 % ethanol-treated PVC materials were used. This treatment played as control group. The cultivation incubations were for 6, 12, 18, and 24 h. The thickness of bacterial BF and bacterial community quantity unit area on the PVC materials was determined by confocal laser scanning microscopy (CLSM), and the surface structure of bacterial BF formation was examined by scanning electron microscopy (SEM). The results of CLSM indicated the thickness of bacterial BF and bacterial community quantity unit area on PVC materials treated with furanone-3 were significantly lower than that of control at all time points (P 0.05). The results of SEM indicated that after 6 h incubation, the quantity of bacterial attachment to the surface of PVC material treated with furanone-3 was lower than the control group. By 18 h incubation there was completely formed BF structure on the surface of control PVC material. However, there was no significant BF formation on the surface of PVC material treated with furanone-3. The impact of different brominated furanones on SA biofilm formation on the surface of PVC materials are different, furanone-3 can inhibit E. coli biofilm formation on the surface of PVC material.

  8. Ways of reducing the bromine numbers of benzene for nitration with the use of the piperylene additive

    Energy Technology Data Exchange (ETDEWEB)

    Kolyandr, L.Ya.; Litvinenko, A.M.; Mastyukov, V.A.; Potapchenko, A.A.; Savikkova, M.T.; Shoherbakova, T.G.; Shuzhenko, E.A.; Titarenko, V.G.; Tkachenko, L.A.

    1981-01-01

    To study the diminution of the bromine numbers of benzene for nitration, an investigation has been made of the impurities according to the fractions of the tests of benzene production of three coke and chemical works: the works in Makeev-a, ka, Bagleisk and Yenakievo. It has been found that when the piperylene additive is used, the value of the bromine numbers of benzene for nitration is determined, in the main, not by the piperylenes removed during purification. When the intermediate BT fractions are not sufficiently clearly selected, the value of the bromine numbers of benzene is influenced also by the impurities which are concentrated in its terminal fractions. To radically remove piperylenes, it is necessary to improve the contact between the acid and the fraction being purified; this is attained by intensifying mixing and lengthening the purification process.

  9. Reaction modelling of Iron Oxide Bromination in the UT-3 thermochemical cycle for Hydrogen production from water

    International Nuclear Information System (INIS)

    Analysis modelling of the iron oxide bromination had been carried out using experiment data from the iron oxide bromination in the UT-3 thermochemical cycle. Iron oxide in the form of pellets were made of the calcination of the mixture of iron oxide, silica, graphite and cellulose at 1473 K. Thermobalance reactor was used to study the kinetic reactions of the iron oxide bromination at a temperature of 473 K for 2 - 6 hours. The data collected from the experiments were used as input for the common models. However, none of these models could not explain the result of the experiments. A new model, a combination of two kinetic reactions : exposed particle and coated particle was created and worked successfully

  10. SYNTHESIS AND GREEN BROMINATION OF SOME CHALCONES AND THEIR ANTIMICROBIAL SCREENING

    Directory of Open Access Journals (Sweden)

    Mayur R. Adokar

    2013-04-01

    Full Text Available Chalcones are the versatile molecules having the structural flexibility which permits structural transformations into flavonoids, flavanones, pyrazoles, oxazoles, pyrimidines etc. Changes in their structure have offered the development of new medicinal agents having improved pharmacological potency. Their derivatives have attracts increasing attention due to numerous pharmacological potential. In the present communication we report the synthesis of chalcones from various acetophenone derivatives with different aromatic aldehydes and green chemistry approach to their bromination with the help of Tetrabutylammonium Tribromide (TBATB. All the synthesized chalcone dibromides were screened for their antimicrobial activity against Aspergillus flavus, Rhizopus sp., Fusarium solani and Aspergillus niger.

  11. Brominated flame retardants in waste electrical and electronic equipment: substance flows in a recycling plant.

    Science.gov (United States)

    Morf, Leo S; Tremp, Josef; Gloor, Rolf; Huber, Yvonne; Stengele, Markus; Zennegg, Markus

    2005-11-15

    Brominated flame retardants (BFRs) are synthetic additives mainly used in electrical and electronic appliances and in construction materials. The properties of some BFRs are typical for persistent organic pollutants, and certain BFRs, in particular some polybrominated diphenyl ether (PBDE) congeners and hexabromocyclododecane (HBCD), are suspected to cause adverse health effects. Global consumption of the most demanded BFRs, i.e., penta-, octa-, and decaBDE, tetrabromobisphenol A (TBBPA), and HBCD, has doubled in the 1990s. Only limited and rather uncertain data are available regarding the occurrence of BFRs in consumer goods and waste fractions as well as regarding emissions during use and disposal. The knowledge of anthropogenic substance flows and stocks is essential for early recognition of environmental impacts and effective chemicals management. In this paper, actual levels of penta-, octa-, and decaBDE, TBBPA, and HBCD in waste electrical and electronic equipment (WEEE) as a major carrier of BFRs are presented. These BFRs have been determined in products of a modern Swiss recycling plant applying gas chromatography/electron capture detection and gas chromatography/mass spectrometry analysis. A substance flow analysis (SFA) technique has been used to characterize the flows of target substances in the recycling process from the bulk WEEE input into the output products. Average concentrations in small size WEEE, representing the relevant electric and electronic appliances in WEEE, sampled in 2003 amounted to 34 mg/kg for pentaBDE, 530 mg/kg for octaBDE, 510 mg/kg for decaBDE, 1420 mg/kg for TBBPA (as an additive), 17 mg/kg for HBCD, 5500 mg/kg for bromine, and 1700 mg/kg for antimony. In comparison to data that have been calculated by SFA for Switzerland from literature for the 1990s, these measured concentrations in small size WEEE were 7 times higher for pentaBDE, unexpectedly about 50% lower for decaBDE, and agreed fairly well for TBBPA (as an additive) and

  12. Antibacterial Activities of a New Brominated Diterpene from Borneon Laurencia spp

    Science.gov (United States)

    Vairappan, Charles Santhanaraju; Ishii, Takahiro; Lee, Tan Kai; Suzuki, Minoru; Zhaoqi, Zhan

    2010-01-01

    In our continuous interest to study the diversity of halogenated metabolites of Malaysian species of the red algal genus Laurencia, we examined the chemical composition of five populations of unrecorded Laurencia sp. A new brominated diterpene, 10-acetoxyangasiol (1), and four other known metabolites, aplysidiol (2), cupalaurenol (3), 1-methyl-2,3,5-tribromoindole (4), and chamigrane epoxide (5), were isolated and identified. Isolated metabolites exhibited potent antibacterial activities against clinical bacteria, Staphylococcus aureus, Staphylococcus sp., Streptococcus pyogenes, Salmonella sp. and Vibrio cholerae. PMID:20631866

  13. Antibacterial Activities of a New Brominated Diterpene from Borneon Laurencia spp.

    Directory of Open Access Journals (Sweden)

    Charles Santhanaraju Vairappan

    2010-05-01

    Full Text Available In our continuous interest to study the diversity of halogenated metabolites of Malaysian species of the red algal genus Laurencia, we examined the chemical composition of five populations of unrecorded Laurencia sp. A new brominated diterpene, 10-acetoxyangasiol (1, and four other known metabolites, aplysidiol (2, cupalaurenol (3, 1-methyl-2,3,5-tribromoindole (4, and chamigrane epoxide (5, were isolated and identified. Isolated metabolites exhibited potent antibacterial activities against clinical bacteria, Staphylococcus aureus, Staphylococcus sp., Streptococcus pyogenes, Salmonella sp. and Vibrio cholerae.

  14. Price Wars and the Stability of Collusion: A Study of the Pre-World War I Bromine Industry

    OpenAIRE

    Margaret Levenstein

    1993-01-01

    Bromine producers colluded to raise prices and profits during most of the period between 1885 and 1914. Collusion was punctuated by price wars in which prices fell sharply. The characteristics of these price wars are compared with those in the Green-Porter and Abreu- Pearce-Stachetti models. Some of the bromine price wars resulted from the imperfect monitoring problems in these models. Those price wars were short and mild. More severe price wars were part of a bargaining process, in which fir...

  15. Synchrotron X-ray fluorescence studies of a bromine-labelled cyclic RGD peptide interacting with individual tumor cells

    International Nuclear Information System (INIS)

    The first example of synchrotron X-ray fluorescence imaging of cultured mammalian cells in cyclic peptide research is reported. The study reports the first quantitative analysis of the incorporation of a bromine-labelled cyclic RGD peptide and its effects on the biodistribution of endogenous elements (for example, K and Cl) within individual tumor cells. The first example of synchrotron X-ray fluorescence imaging of cultured mammalian cells in cyclic peptide research is reported. The study reports the first quantitative analysis of the incorporation of a bromine-labelled cyclic RGD peptide and its effects on the biodistribution of endogenous elements (for example, K and Cl) within individual tumor cells

  16. Distribution and speciation of bromine in mammalian tissue and fluids by X-ray fluorescence imaging and X-ray absorption spectroscopy.

    Science.gov (United States)

    Ceko, Melanie J; Hummitzsch, Katja; Hatzirodos, Nicholas; Bonner, Wendy; James, Simon A; Kirby, Jason K; Rodgers, Raymond J; Harris, Hugh H

    2015-05-01

    Bromine is one of the most abundant and ubiquitous trace elements in the biosphere and until recently had not been shown to perform any essential biological function in animals. A recent study demonstrated that bromine is required as a cofactor for peroxidasin-catalysed formation of sulfilimine crosslinks in Drosophila. In addition, bromine dietary deficiency is lethal in Drosophila, whereas bromine replenishment restores viability. The aim of this study was to examine the distribution and speciation of bromine in mammalian tissues and fluids to provide further insights into the role and function of this element in biological systems. In this study we used X-ray fluorescence (XRF) imaging and inductively coupled plasma-mass spectrometry (ICP-MS) to examine the distribution of bromine in bovine ovarian tissue samples, follicular fluid and aortic serum, as well as human whole blood and serum and X-ray absorption spectroscopy (XAS) to identify the chemical species of bromine in a range of mammalian tissue (bovine, ovine, porcine and murine), whole blood and serum samples (bovine, ovine, porcine, murine and human), and marine samples (salmon (Salmo salar), kingfish (Seriola lalandi) and Scleractinian coral). Bromine was found to be widely distributed across all tissues and fluids examined. In the bovine ovary in particular it was more concentrated in the sub-endothelial regions of arterioles. Statistical comparison of the near-edge region of the X-ray absorption spectra with a library of bromine standards led to the conclusion that the major form of bromine in all samples analysed was bromide. PMID:25675086

  17. Analytical approaches for determination of bromine in sediment core samples by X-ray fluorescence spectrometry.

    Science.gov (United States)

    Pashkova, Galina V; Aisueva, Tatyana S; Finkelshtein, Alexander L; Ivanov, Egor V; Shchetnikov, Alexander A

    2016-11-01

    Bromine has been recognized as a valuable indicator for paleoclimatic studies. Wavelength dispersive X-ray fluorescence (WDXRF) and total reflection X-ray fluorescence (TXRF) methods were applied to study the bromine distributions in lake sediment cores. Conventional WDXRF technique usually requires relatively large mass of a sediment sample and a set of calibration samples. Some analytical approaches were developed to apply WDXRF to small sediment core samples in the absence of adequate calibration samples with a known Br content. The mass of a sample to be analyzed was reduced up to 200-300mg and the internal standard method with correction using fundamental parameters was developed for Br quantification. TXRF technique based on the direct analysis of a solid suspension using 20mg of sediment sample by internal standard method was additionally tested. The accuracy of the WDXRF and TXRF techniques was assessed by the comparative analysis of reference materials of sediments, soil and biological samples. In general, good agreement was achieved between the reference values and the measured values. The detection limits of Br were 1mg/kg and 0.4mg/kg for WDXRF and TXRF respectively. The results of the Br determination obtained with different XRF techniques were comparable to each other and used for paleoclimatic reconstructions. PMID:27591627

  18. Synthesis of α-Bromine- Terminated Polystyrene Macroinitiator and Its Initiation of MMA Polymerization by ATRP

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    In the present paper the synthesis of block copolymers via the transformation from living anionic polymerization (LAP) to atom transfer radical polymerization (ATRP) was described. Α-Bromine-terminated polystyrenes(PStBr) in the LAP step was prepared by using n-BuLi as initiator, tetrahydrofuran (THF) as the activator, α-methylstyrene (α-MeSt) as the capping group and liquid bromine (Br2) as the bromating agent. The effects of reaction conditions such as the amounts of α-MeSt, THF, and Br2 as well as molecular weight of polystyrene on the bromating efficiency (BE) and coupling extent (CE) were examined. The present results show that the yield of PStBr obtained was more than 93.8% and the coupling reaction was substantially absent. PStBr was further used as the macroinitiator in the polymerization of methyl-methacrylate(MMA) in the presence of copper(Ⅰ) halogen and 2,2-bipyridine(bpy) complexes. It was found that the molecular weight of the resulted PSt-b-PMMA increased linearly with the increase of the conversion of MMA and the polydispersity was 1.2-1.6. The structures of PStBr and P(St-b-MMA) were characterized by 1H NMR spectra.

  19. Levelized cost of energy and sensitivity analysis for the hydrogen-bromine flow battery

    Science.gov (United States)

    Singh, Nirala; McFarland, Eric W.

    2015-08-01

    The technoeconomics of the hydrogen-bromine flow battery are investigated. Using existing performance data the operating conditions were optimized to minimize the levelized cost of electricity using individual component costs for the flow battery stack and other system units. Several different configurations were evaluated including use of a bromine complexing agent to reduce membrane requirements. Sensitivity analysis of cost is used to identify the system elements most strongly influencing the economics. The stack lifetime and round-trip efficiency of the cell are identified as major factors on the levelized cost of electricity, along with capital components related to hydrogen storage, the bipolar plate, and the membrane. Assuming that an electrocatalyst and membrane with a lifetime of 2000 cycles can be identified, the lowest cost market entry system capital is 220 kWh-1 for a 4 h discharge system and for a charging energy cost of 0.04 kWh-1 the levelized cost of the electricity delivered is 0.40 kWh-1. With systems manufactured at large scales these costs are expected to be lower.

  20. Hair as an indicator of endogenous tissue levels of brominated flame retardants in mammals.

    Science.gov (United States)

    D'Havé, Helga; Covaci, Adrian; Scheirs, Jan; Schepens, Paul; Verhagen, Ron; De Coen, Wim

    2005-08-15

    Few data are available on brominated flame retardants (BFRs) in terrestrial mammalian wildlife. Moreover, the use of hair in nondestructive monitoring of BFRs in mammals or humans has not been investigated. In the present study, concentrations of polybrominated diphenyl ethers (PBDEs) and brominated biphenyl 153 (BB 153) were analyzed in tissues of the European hedgehog Erinaceus europaeus. Road kills and carcasses from wildlife rescue centers were used to investigate relationships between concentrations of BFRs in hair and internal tissues, BFR tissue distribution (hair, liver, kidney, muscle, and adipose tissue), and PBDE congener tissue pattern dissimilarities. Liver concentrations of PBDEs and BB 153 were in the ranges 1-1178 and 0-2.5 ng/g of liver wet weight, respectively. PBDEs were predominant in adipose tissue and liver, while accumulation of BB 153 was tissue independent. The less persistent compound BDE 99 was more dominant in hair than in internal tissues. We observed positive relationships between BFR levels in hair and internal tissues for sum PBDEs and BDE 47 (0.37 terrestrial mammals which can be used in nondestructive monitoring schemes.

  1. Dissolution of brominated epoxy resins by dimethyl sulfoxide to separate waste printed circuit boards.

    Science.gov (United States)

    Zhu, Ping; Chen, Yan; Wang, Liangyou; Qian, Guangren; Zhang, Wei Jie; Zhou, Ming; Zhou, Jin

    2013-03-19

    Improved methods are required for the recycling of waste printed circuit boards (WPCBs). In this study, WPCBs (1-1.5 cm(2)) were separated into their components using dimethyl sulfoxide (DMSO) at 60 °C for 45 min and a metallographic microscope was used to verify their delamination. An increased incubation time of 210 min yielded a complete separation of WPCBs into their components, and copper foils and glass fibers were obtained. The separation time decreased with increasing temperature. When the WPCB size was increased to 2-3 cm(2), the temperature required for complete separation increased to 90 °C. When the temperature was increased to 135 °C, liquid photo solder resists could be removed from the copper foil surfaces. The DMSO was regenerated by rotary decompression evaporation, and residues were obtained. Fourier transform infrared spectroscopy (FT-IR), thermal analysis, nuclear magnetic resonance, scanning electron microscopy, and energy-dispersive X-ray spectroscopy were used to verify that these residues were brominated epoxy resins. From FT-IR analysis after the dissolution of brominated epoxy resins in DMSO it was deduced that hydrogen bonding may play an important role in the dissolution mechanism. This novel technology offers a method for separating valuable materials and preventing environmental pollution from WPCBs. PMID:23398278

  2. Biodegradation kinetics of selected brominated flame retardants in aerobic and anaerobic soil

    Energy Technology Data Exchange (ETDEWEB)

    Nyholm, Jenny Rattfelt, E-mail: jenny.rattfelt@chem.umu.s [Department of Chemistry, Umea University, SE-901 87 Umea (Sweden); Lundberg, Charlott; Andersson, Patrik L. [Department of Chemistry, Umea University, SE-901 87 Umea (Sweden)

    2010-06-15

    The purpose of the present study was to investigate the biodegradation kinetics in aerobic and anaerobic soil of the following brominated flame retardants: 2,4,4'-tribromodiphenyl ether (BDE 28), decabromodiphenyl ether (BDE 209), tetrabromobisphenol A (TBBPA), 1,2-dibromo-4-(1,2-dibromoethyl)cyclohexane (TBECH), 2,4,6-tribromophenol (246BrPh), and hexabromobenzene (HxBrBz). For comparison, the biodegradation of the chlorinated compounds 2,4,4'-trichlorodiphenyl ether (CDE 28), 2,4,6-trichlorophenol (246ClPh), hexachlorobenzene (HxClBz), and 2,2',4,4',5,5'-hexachlorobiphenyl (PCB 153) was also assessed. In aerobic soil, BDE 209 showed no significant degradation during the test period, but concentrations of the other BFRs declined, with half-lives decreasing in the following order: BDE 28 > TBBPA > TBECH > HxBrBz > 246BrPh. Declines in almost the same order were observed in anaerobic soil: BDE 28, BDE 209 > TBBPA > HxBrBz > TBECH >246BrPh. - Intra- and extrapolated half-lives in soil of tested brominated flame retardants ranged from 7 days for 2,4,6-tribromorophenol to >400 days for decabromodiphenyl ether.

  3. Novel Spectrophotometric Method for Determination of Macro-paracetamol via Reaction with Bromine

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    The reaction between Br2 and paracetamol(p-AAP) leads to the formation of a coloured product, which can be used for spectrophotometric determination of the p-AAP content in its pure form and in different pharmaceutical preparations with p-AAP. The stoichiometric composition of the reaction was found to be n(p-AAP)∶n(bromine)=1∶3. The effects of pH and time on the spectra of p-AAP-bromine redox reaction product were studied. The interference of different additives on the measured spectra of the obtained product was also studied. The results obtained by the present method were compared with those obtained by the standard method. The F- and t- test values were calculated for both of the applied procedures and they met a confidence level of 99%. The proposed procedure actually needs no separation of these drugs from their sources before analysis and was unaffected by interference of other phenolic compounds. The proposed method is simpler and faster than the repoeted ones.

  4. Selected chlorobornanes, polychlorinated naphthalenes and brominated flame retardants in Bjornoya (Bear Island) freshwater biota

    International Nuclear Information System (INIS)

    Levels of selected sparsely investigated persistent organic pollutants (POPs) have been measured in organisms from two Arctic lakes on Bjornoya (Bear Island). Elevated levels of chlorobornanes (CHBs) (up to 46.7 ng/g wet weight=ww), polybrominated diphenyl ethers (PBDEs) (up to 27.2 ng/g ww), polybrominated biphenyls (PBBs) (up to 1.1 ng/g ww) and polychlorinated naphthalenes (PCNs, only 4 congeners) (up to 62.7 pg/g ww), were measured in biota from Lake Ellasjoen. In Lake Oyangen, located only 5 km north of Ellasjoen, levels of these contaminants were significantly lower. δ15N-values were 7-10%o higher in organisms from Ellasjoen as compared to Oyangen. This is attributed to biological inputs related to seabird activities. The present study illustrates that contaminants such as CHBs, brominated flame retardants and PCNs accumulate in the Ellasjoen food web in a manner similar to PCBs and conventional organochlorine pesticides. Transport mechanisms that control PCB and DDT distributions, i.e. atmospheric long-range transport and biotransport by seabirds, are also relevant for the contaminants investigated in the present study. - Elevate levels of chlorobornanes, polychlorinated naphthalenes and brominated flame retardants have been measured in biota from a Norwegian Arctic lake

  5. Development of Zinc/Bromine Batteries for Load-Leveling Applications: Phase 2 Final Report

    Energy Technology Data Exchange (ETDEWEB)

    CLARK,NANCY H.; EIDLER,PHILLIP

    1999-10-01

    This report documents Phase 2 of a project to design, develop, and test a zinc/bromine battery technology for use in utility energy storage applications. The project was co-funded by the U.S. Department of Energy Office of Power Technologies through Sandia National Laboratories. The viability of the zinc/bromine technology was demonstrated in Phase 1. In Phase 2, the technology developed during Phase 1 was scaled up to a size appropriate for the application. Batteries were increased in size from 8-cell, 1170-cm{sup 2} cell stacks (Phase 1) to 8- and then 60-cell, 2500-cm{sup 2} cell stacks in this phase. The 2500-cm{sup 2} series battery stacks were developed as the building block for large utility battery systems. Core technology research on electrolyte and separator materials and on manufacturing techniques, which began in Phase 1, continued to be investigated during Phase 2. Finally, the end product of this project was a 100-kWh prototype battery system to be installed and tested at an electric utility.

  6. Tropospheric Bromine Chemistry: Implications for Present and Pre-industrial Ozone and Mercury

    Science.gov (United States)

    Parella, J. P.; Jacob, D. J.; Liang, Q.; Zhang, Y.; Mickley, L. J.; Miller, B.; Evans, M. J.; Yang, X.; Pyle, J. A.; Theys, N.; VanRoozendael, M.

    2012-01-01

    We present a new model for the global tropospheric chemistry of inorganic bromine (Bry) coupled to oxidant-aerosol chemistry in the GEOS-Chem chemical transport model (CTM). Sources of tropospheric Bry include debromination of sea-salt aerosol, photolysis and oxidation of short-lived bromocarbons, and transport from the stratosphere. Comparison to a GOME-2 satellite climatology of tropospheric BrO columns shows that the model can reproduce the observed increase of BrO with latitude, the northern mid-latitudes maximum in winter, and the Arctic maximum in spring. This successful simulation is contingent on the HOBr + HBr reaction taking place in aqueous aerosols and ice clouds. Bromine chemistry in the model decreases tropospheric ozone mixing ratios by mercury against oxidation by Br. This suggests that historical anthropogenic mercury emissions may have mostly deposited to northern mid-latitudes, enriching the corresponding surface reservoirs. The persistent rise in background surface ozone at northern mid-latitudes during the past decades could possibly contribute to the observations of elevated mercury in subsurface waters of the North Atlantic.

  7. Brominated diphenyl ethers in the sediments, porewater, and biota of the Chesapeake Bay, USA

    Energy Technology Data Exchange (ETDEWEB)

    Baker, K.; Klosterhaus, S.; Liebert, D.; Stapleton, H. [Maryland Univ., Solomons, MD (United States)

    2004-09-15

    Levels of brominated diphenyl ethers (BDEs) are rapidly increasing in the environment, and in a short time these chemicals have evolved from 'emerging contaminants' to globally-distributed organic pollutants. Recent research demonstrates BDEs are sufficiently stable to be transported long distances in the environment and to accumulate in higher trophic levels. Photolysis and metabolism appear to be dominant loss processes for the parent compounds, generating a variety of lower brominated diphenyl ethers, hydroxylated metabolites, and other products. BDEs are hydrophobic, and therefore their transport in aquatic systems is likely controlled by sorption to sediments and perhaps exchange across the air-water interface. To date, few studies have examined the geochemistry of BDEs in natural waters. In this paper, we review our recent measurements of BDEs in the Chesapeake Bay, a shallow, productive estuary in eastern North America. We focus on the distribution of BDE congeners sediment, porewater, and in faunal benthos along a contamination gradient downstream from a wastewater treatment plant and on the spatial distribution of BDEs in bottom-feeding and pelagic fish species.

  8. Ultrafast optical limiting properties and transient dynamics of symmetrical phenoxazinium bromine salt

    Science.gov (United States)

    Xiao, Zhengguo; Ge, Jianfeng; Li, Zhongguo; Wu, Xingzhi; Fang, Yu; Shi, Guang; Zhang, Xueru; Wang, Yuxiao; Song, Yinglin

    2015-12-01

    A symmetrical phenoxazinium bromine salt with resonant D-π-D structure was prepared and spectroscopically characterized. The ultrafast nonlinear optical (NLO) response of the compound dissolved in DMF was investigated using open aperture Z-scan method with 190 fs laser pulses at 515 nm. And the photo-physical dynamics of the compound was studied using transient absorption spectra at femtosecond time regime. The titled sample showed strong reverse saturable absorption (RSA) at 515 nm. Transient absorption results demonstrated that the compound exhibited RSA signals at 478-580 nm and SA signals at 600-780 nm. A simplified three-energy-level model was used to determine the photo-physical parameters. And the excited-state lifetime was evaluated to be around one nanosecond. Our results show that the phenoxazinium bromine salt has a large ratio of singlet excited-state absorption cross-section to that of ground state cross-section (18.7), indicating it is a candidate material for future ultrafast optical limiters.

  9. Natural solar photolysis of total organic chlorine, bromine and iodine in water.

    Science.gov (United States)

    Abusallout, Ibrahim; Hua, Guanghui

    2016-04-01

    Municipal wastewater has been increasingly used to augment drinking water supplies due to the growing water scarcity. Wastewater-derived disinfection byproducts (DBPs) may negatively affect the aquatic ecosystems and human health of downstream communities during water reuse. The objective of this research was to determine the degradation kinetics of total organic chlorine (TOCl), bromine (TOBr) and iodine (TOI) in water by natural sunlight irradiation. Outdoor solar photolysis experiments were performed to investigate photolytic degradation of the total organic halogen (TOX) formed by fulvic acid and real water and wastewater samples. The results showed that TOX degradation by sunlight irradiation followed the first-order kinetics with half-lives in the range of 2.6-10.7 h for different TOX compounds produced by fulvic acid. The TOX degradation rates were generally in the order of TOI > TOBr ≅ TOCl(NH2Cl) > TOCl(Cl2). High molecular weight TOX was more susceptible to solar photolysis than corresponding low molecular weight halogenated compounds. The nitrate and sulfite induced indirect TOX photolysis rates were less than 50% of the direct photolysis rates under the conditions of this study. Fulvic acid and turbidity in water reduced TOX photodegradation. These results contribute to a better understanding of the fate of chlorinated, brominated and iodinated DBPs in surface waters.

  10. Selected chlorobornanes, polychlorinated naphthalenes and brominated flame retardants in Bjornoya (Bear Island) freshwater biota

    Energy Technology Data Exchange (ETDEWEB)

    Evenset, Anita [Akvaplan-niva, Polar Environmental Centre, N-9296 Tromso (Norway)]. E-mail: ae@akvaplan.niva.no; Christensen, Guttorm N. [Akvaplan-niva, Polar Environmental Centre, N-9296 Tromso (Norway); Kallenborn, Roland [Norwegian Institute for Air Research, P.O. Box 100, N-2027 Kjeller (Norway)

    2005-08-15

    Levels of selected sparsely investigated persistent organic pollutants (POPs) have been measured in organisms from two Arctic lakes on Bjornoya (Bear Island). Elevated levels of chlorobornanes (CHBs) (up to 46.7 ng/g wet weight=ww), polybrominated diphenyl ethers (PBDEs) (up to 27.2 ng/g ww), polybrominated biphenyls (PBBs) (up to 1.1 ng/g ww) and polychlorinated naphthalenes (PCNs, only 4 congeners) (up to 62.7 pg/g ww), were measured in biota from Lake Ellasjoen. In Lake Oyangen, located only 5 km north of Ellasjoen, levels of these contaminants were significantly lower. {delta}{sup 15}N-values were 7-10%o higher in organisms from Ellasjoen as compared to Oyangen. This is attributed to biological inputs related to seabird activities. The present study illustrates that contaminants such as CHBs, brominated flame retardants and PCNs accumulate in the Ellasjoen food web in a manner similar to PCBs and conventional organochlorine pesticides. Transport mechanisms that control PCB and DDT distributions, i.e. atmospheric long-range transport and biotransport by seabirds, are also relevant for the contaminants investigated in the present study. - Elevate levels of chlorobornanes, polychlorinated naphthalenes and brominated flame retardants have been measured in biota from a Norwegian Arctic lake.

  11. Levels and distribution of brominated flame retardants in the soil of Harbin in China

    Institute of Scientific and Technical Information of China (English)

    WANG Xu; REN Nanqi; QI Hong; MA Wanli; LI Yifan

    2009-01-01

    This study reports the presence of brominated flame retardants in the topsoil in and around Harbin,a city in northeastern China.Samples of soil were collected from 17 locations in 2006,and the levels of 9 polybrominated diphenylethers (PBDEs 17,28,47,66,99,100,153,154,and 183) ranged from 2.45 to 55.9 pg/g dry weight (dw) with a mean of 26.3 pg/g dw.These levels are very low compared with those for some cities in Europe and the USA.BDE 209 and hexabromocyclododecane were the two dominant congeners,with mean concentrations of 520 pg/g dw and 1750 pg/g dw,respectively.The concentrations of the total 9 PBDE congeners clearly decreased from urban areas to background,but the compositions of individual congeners differed.Proportions of heavier congeners decreased while those of lighter congeners increased,along urban-rural-background transect,providing evidence for an urban fractionation effect.Correlation analysis indicated similar sources for PBDEs,hexabromocyclododecane,and 1,2-bis(2,4,6-tribromophenoxy)-ethane from urban areas but pentabromoethylbenzene was probably present due to long-range atmospheric transport.Principal component analysis was used to determine the characteristics of the relationships among these brominated flame retardants in the field.

  12. Nitrogenous disinfection byproducts in English drinking water supply systems: Occurrence, bromine substitution and correlation analysis.

    Science.gov (United States)

    Bond, Tom; Templeton, Michael R; Mokhtar Kamal, Nurul Hana; Graham, Nigel; Kanda, Rakesh

    2015-11-15

    Despite the recent focus on nitrogenous disinfection byproducts in drinking water, there is limited occurrence data available for many species. This paper analyses the occurrence of seven haloacetonitriles, three haloacetamides, eight halonitromethanes and cyanogen chloride in 20 English drinking water supply systems. It is the first survey of its type to compare bromine substitution factors (BSFs) between the haloacetamides and haloacetonitriles. Concentrations of the dihalogenated haloacetonitriles and haloacetamides were well correlated. Although median concentrations of these two groups were lower in chloraminated than chlorinated surface waters, median BSFs for both in chloraminated samples were approximately double those in chlorinated samples, which is significant because of the higher reported toxicity of the brominated species. Furthermore, median BSFs were moderately higher for the dihalogenated haloacetamides than for the haloacetonitriles. This indicates that, while the dihalogenated haloacetamides were primarily generated from hydrolysis of the corresponding haloacetonitriles, secondary formation pathways also contributed. Median halonitromethane concentrations were remarkably unchanging for the different types of disinfectants and source waters: 0.1 μg · mgTOC(-1) in all cases. Cyanogen chloride only occurred in a limited number of samples, yet when present its concentrations were higher than the other N-DBPs. Concentrations of cyanogen chloride and the sum of the halonitromethanes were not correlated with any other DBPs.

  13. Prenatal Exposure to Organohalogens, Including Brominated Flame Retardants, Influences Motor, Cognitive, and Behavioral Performance at School Age

    NARCIS (Netherlands)

    Roze, Elise; Meijer, Lisethe; Bakker, Attie; Van Braeckel, Koenraad N. J. A.; Sauer, Pieter J. J.; Bos, Arend F.

    2009-01-01

    BACKGROUND: Organohalogen compounds (OHCs) are known to have neurotoxic effects on the developing brain. OBJECTIVE: We investigated the influence of prenatal exposure to OHCs, including brominated flame retardants, on motor, cognitive, and behavioral outcome in healthy children of school age. METHOD

  14. Different speciation for bromine in brown and red algae, revealed by in vivo X-ray absorption spectroscopic studies.

    Science.gov (United States)

    Küpper, Frithjof C; Leblanc, Catherine; Meyer-Klaucke, Wolfram; Potin, Philippe; Feiters, Martin C

    2014-08-01

    Members of various algal lineages are known to be strong producers of atmospherically relevant halogen emissions, that is a consequence of their capability to store and metabolize halogens. This study uses a noninvasive, synchrotron-based technique, X-ray absorption spectroscopy, for addressing in vivo bromine speciation in the brown algae Ectocarpus siliculosus, Ascophyllum nodosum, and Fucus serratus, the red algae Gracilaria dura, G. gracilis, Chondrus crispus, Osmundea pinnatifida, Asparagopsis armata, Polysiphonia elongata, and Corallina officinalis, the diatom Thalassiosira rotula, the dinoflagellate Lingulodinium polyedrum and a natural phytoplankton sample. The results highlight a diversity of fundamentally different bromine storage modes: while most of the stramenopile representatives and the dinoflagellate store mostly bromide, there is evidence for Br incorporated in nonaromatic hydrocarbons in Thalassiosira. Red algae operate various organic bromine stores - including a possible precursor (by the haloform reaction) for bromoform in Asparagopsis and aromatically bound Br in Polysiphonia and Corallina. Large fractions of the bromine in the red algae G. dura and C. crispus and the brown alga F. serratus are present as Br(-) defects in solid KCl, similar to what was reported earlier for Laminaria parts. These results are discussed according to different defensive strategies that are used within algal taxa to cope with biotic or abiotic stresses. PMID:26988449

  15. Rapid Formation of Molecular Bromine from Deliquesced NaBr Aerosol in the Presence of Ozone and UV Light

    Science.gov (United States)

    The formation of gas-phase bromine from aqueous sodium bromide aerosols is investigated through a combination of chamber experiments and chemical kinetics modeling. Experiments show that Br2(g) is produced rapidly from deliquesced NaBr aerosols in the presence of OH radicals prod...

  16. Exposure to brominated trihalomethanes in water during pregnancy and micronuclei frequency in maternal and cord blood lymphocytes

    DEFF Research Database (Denmark)

    Stayner, Leslie Thomas; Pedersen, Marie; Patelarou, Evridiki;

    2014-01-01

    BACKGROUND: Water disinfection by-products have been associated with an increased cancer risk. Micronuclei (MN) frequency in lymphocytes is a marker of genomic damage and can predict adult cancer risk. OBJECTIVE: We evaluated maternal exposure to drinking water brominated trihalomethanes (BTHM) i...

  17. Bromination of Aromatic Compounds by Residual Bromide in Sodium Chloride Matrix Modifier Salt During Heated Headspace GC/MS Analysis

    Science.gov (United States)

    Analytical artifacts attributed to the bromination of toluene, xylenes, and trimethylbenzenes were found during the heated headspace gas chromatography/mass spectrometry (GC/MS) analysis of aqueous samples. The aqueous samples were produced from Fenton-like chemical oxidation rea...

  18. Accumulation of organochlorines and brominated flame retardants in estuarine and marine food chains: Field measurements and model calculations

    NARCIS (Netherlands)

    Veltman, K.; Hendriks, J.; Huijbregts, M.; Leonards, P.E.G.; Heuvel-Greve, van den M.J.; Vethaak, D.

    2005-01-01

    Food chain accumulation of organochlorines and brominated flame retardants in estuarine and marine environments is compared to model estimations and fresh water field data. The food chain consists of herbivores, detritivores and primary and secondary carnivores i.e. fish, fish-eating birds and marin

  19. Subacute effects of the brominated flame retardants hexabromocyclododecane and tetrabromobisphenol A on hepatic cytochrome P450 levels in rats.

    NARCIS (Netherlands)

    Germer, Silke; Piersma, Aldert H; Ven, Leo T M van der; Kamyschnikow, Andreas; Fery, Yvonne; Schmitz, Hans-Joachim; Schrenk, Dieter

    2006-01-01

    The brominated flame retardants tetrabromobisphenol A (TBBPA) and hexabromocyclododecane (HBCD) are found in the environment, e.g., in sediments and organisms, in food items, human blood samples and mother's milk. In this study, the effects of both compounds on rat hepatic cytochrome P450 (CYP) leve

  20. Reaction of bromine and chlorine with phenolic compounds and natural organic matter extracts--Electrophilic aromatic substitution and oxidation.

    Science.gov (United States)

    Criquet, Justine; Rodriguez, Eva M; Allard, Sebastien; Wellauer, Sven; Salhi, Elisabeth; Joll, Cynthia A; von Gunten, Urs

    2015-11-15

    Phenolic compounds are known structural moieties of natural organic matter (NOM), and their reactivity is a key parameter for understanding the reactivity of NOM and the disinfection by-product formation during oxidative water treatment. In this study, species-specific and/or apparent second order rate constants and mechanisms for the reactions of bromine and chlorine have been determined for various phenolic compounds (phenol, resorcinol, catechol, hydroquinone, phloroglucinol, bisphenol A, p-hydroxybenzoic acid, gallic acid, hesperetin and tannic acid) and flavone. The reactivity of bromine with phenolic compounds is very high, with apparent second order rate constants at pH 7 in the range of 10(4) to 10(7) M(-1) s(-1). The highest value was recorded for the reaction between HOBr and the fully deprotonated resorcinol (k = 2.1 × 10(9) M(-1) s(-1)). The reactivity of phenolic compounds is enhanced by the activating character of the phenolic substituents, e.g. further hydroxyl groups. With the data set from this study, the ratio between the species-specific rate constants for the reactions of chlorine versus bromine with phenolic compounds was confirmed to be about 3000. Phenolic compounds react with bromine or chlorine either by oxidation (electron transfer, ET) or electrophilic aromatic substitution (EAS) processes. The dominant process mainly depends on the relative position of the hydroxyl substituents and the possibility of quinone formation. While phenol, p-hydroxybenzoic acid and bisphenol A undergo EAS, hydroquinone, catechol, gallic acid and tannic acid, with hydroxyl substituents in ortho or para positions, react with bromine by ET leading to quantitative formation of the corresponding quinones. Some compounds (e.g. phloroglucinol) show both partial oxidation and partial electrophilic aromatic substitution and the ratio observed for the pathways depends on the pH. For the reaction of six NOM extracts with bromine, electrophilic aromatic substitution

  1. Investigating the lifetime of bromine-quenched G.M. Counters with temperature

    Science.gov (United States)

    Abilama, Marc; Bates, Mike; Lohstroh, Annika

    2015-09-01

    The amount of halogen quench gas as a percentage of the total fill gas contained within a gas-filled Geiger-Müller detector is directly linked to its operational characteristics. Preserving this halogen gas will help maintain the operating lifetime of the detectors. Such halogen gases are highly corrosive and the small quantities within a gas-filled detector can deplete rapidly via interactions with surrounding materials. The rate of interactions is thought to be proportional to not only temperature, but also to the current initiated by ionisation events associated with the formation of each signal pulse. As all pulses are of similar magnitudes, GM detector operational lifetimes are quantified in accumulated counts rather than a given operating time. We have studied three different types of corrosion-resistant mechanisms to protect the bromine halogen gas from any interactions with 446 stainless steel detector components of ZP1200 Geiger-Müller tubes at temperatures up to 125 °C. Three types of surface treatments for these detectors used were labelled as "raw" using only an oxygen-plasma-bombardment process, "passivated" using a combination of nitric acid passivation followed by an oxygen plasma-bombardment process, and thirdly plating with a few micron thickness of chromium followed by an oxygen plasma-bombardment process. 32 detector samples were irradiated at room temperature with a Caesium-137 source at dose rates of approximately 1.3 mSv/hr up to 5.7×1010 accumulated counts; another 32 detector samples were aged to 3.3×1010 counts at 125 °C. At room temperature, the chromium-plated samples exhibited an initial rise in their starting voltage readings. All other detector performance characteristics, for all detector types, did not change significantly during the ageing process, and the surface morphology of the detector cathodes was unaffected. At 125 °C, the chromium-based plating produced the most stable long-term response. These chromium-plated samples

  2. Mercury oxidation from bromine chemistry in the free troposphere over the southeastern US

    Directory of Open Access Journals (Sweden)

    S. Coburn

    2015-10-01

    Full Text Available The elevated deposition of atmospheric mercury over the Southeastern United States is currently not well understood. Here we measure partial columns and vertical profiles of bromine monoxide (BrO radicals, a key component of mercury oxidation chemistry, to better understand the processes and altitudes at which mercury is being oxidized in the atmosphere. We use the data from a ground-based MAX-DOAS instrument located at a coastal site ~ 1 km from the Gulf of Mexico in Gulf Breeze, FL, where we had previously detected tropospheric BrO (Coburn et al., 2011. Our profile retrieval assimilates information about stratospheric BrO from the WACCM chemical transport model, and uses only measurements at moderately low solar zenith angles (SZA to estimate the BrO slant column density contained in the reference spectrum (SCDRef. The approach has 2.6 degrees of freedom, and avoids spectroscopic complications that arise at high SZA; knowledge about SCDRef helps to maximize sensitivity in the free troposphere (FT. A cloud-free case study day with low aerosol load (9 April 2010 provided optimal conditions for distinguishing marine boundary layer (MBL: 0–1 km and free tropospheric (FT: 1–15 km BrO from the ground. The average daytime tropospheric BrO vertical column density (VCD of ~ 2.3 × 1013 molec cm−2 (SZA 5 molec cm−2 s−1 for bromine, while contributions from ozone (O3 and chlorine (Cl were 0.9 × 105 and 0.2 × 105 molec cm−2 s−1, respectively. The GOM formation rate is sensitive to recently proposed atmospheric scavenging reactions of the HgBr adduct by nitrogen dioxide (NO2, and to a lesser extent also HO2 radicals. Using a 3-D chemical transport model, we find that surface GOM variations are typical also of other days, and are mainly derived from the free troposphere. Bromine chemistry is active in the FT over Gulf Breeze, where it forms water-soluble GOM that is subsequently available for wet scavenging by thunderstorms or transport to

  3. Bromine release during Plinian eruptions along the Central American Volcanic Arc

    Science.gov (United States)

    Hansteen, T. H.; Kutterolf, S.; Appel, K.; Freundt, A.; Perez-Fernandez, W.; Wehrmann, H.

    2010-12-01

    Volcanoes of the Central American Volcanic Arc (CAVA) have produced at least 72 highly explosive eruptions within the last 200 ka. The eruption columns of all these “Plinian” eruptions reached well into the stratosphere such that their released volatiles may have influenced atmospheric chemistry and climate. While previous research has focussed on the sulfur and chlorine emissions during such large eruptions, we here present measurements of the heavy halogen bromine by means of synchrotron radiation induced micro-XRF microanalysis (SR-XRF) with typical detection limits at 0.3 ppm (in Fe rich standard basalt ML3B glass). Spot analyses of pre-eruptive glass inclusions trapped in minerals formed in magma reservoirs were compared with those in matrix glasses of the tephras, which represent the post-eruptive, degassed concentrations. The concentration difference between inclusions and matrix glasses, multiplied by erupted magma mass determined by extensive field mapping, yields estimates of the degassed mass of bromine. Br is probably hundreds of times more effective in destroying ozone than Cl, and can accumulate in the stratosphere over significant time scales. Melt inclusions representing deposits of 22 large eruptions along the CAVA have Br contents between 0.5 and 13 ppm. Br concentrations in matrix glasses are nearly constant at 0.4 to 1.5 ppm. However, Br concentrations and Cl/Br ratios vary along the CAVA. The highest values of Br contents (>8 ppm) and lowest Cl/Br ratios (170 to 600) in melt inclusions occur across central Nicaragua and southern El Salvador, and correlate with bulk-rock compositions of high Ba/La > 85 as well as low La/Yb discharged 700 kilotons of Br. On average, each of the remaining 21 CAVA eruptions studied have discharged c.100 kilotons of bromine. During the past 200 ka, CAVA volcanoes have emitted a cumulative mass of 3.2 Mt of Br through highly explosive eruptions. There are six periods in the past (c. 2ka, 6ka, 25ka, 40ka, 60ka, 75

  4. Molecular simulations and density functional theory calculations of bromine in clathrate hydrate phases

    Energy Technology Data Exchange (ETDEWEB)

    Dureckova, Hana, E-mail: houci059@uottawa.ca; Woo, Tom K., E-mail: tom.woo@uottawa.ca [Department of Chemistry and Biomolecular Sciences, University of Ottawa, Ottawa, Ontario K1N 5N6 (Canada); Alavi, Saman, E-mail: saman.alavi@nrc-cnrc.gc.ca [Department of Chemistry and Biomolecular Sciences, University of Ottawa, Ottawa, Ontario K1N 5N6 (Canada); National Research Council of Canada, 100 Sussex Dr., Ottawa, Ontario K1N 6N5 (Canada); Department of Chemical and Biological Engineering, University of British Columbia, Vancouver, British Columbia V6T 1Z3 (Canada)

    2016-01-28

    Bromine forms a tetragonal clathrate hydrate structure (TS-I) very rarely observed in clathrate hydrates of other guest substances. The detailed structure, energetics, and dynamics of Br{sub 2} and Cl{sub 2} in TS-I and cubic structure I (CS-I) clathrate hydrates are studied in this work using molecular dynamics and quantum chemical calculations. X-ray diffraction studies show that the halogen-water–oxygen distances in the cages of these structures are shorter than the sum of the van der Waals radii of halogen and oxygen atoms. This suggests that the stabilizing effects of halogen bonding or other non-covalent interactions (NCIs) may contribute to the formation of the unique tetragonal bromine hydrate structure. We performed molecular dynamics simulations of Br{sub 2} and Cl{sub 2} clathrate hydrates using our previously developed five-site charge models for the dihalogen molecules [Dureckova et al. Can. J. Chem. 93, 864 (2015)] which reproduce the computed electrostatic potentials of the dihalogens and account for the electropositive σ-hole of the halogen bond donor (the dihalogen). Analysis of the radial distribution functions, enthalpies of encapsulation, velocity and orientation autocorrelation functions, and polar angle distributions are carried out for Br{sub 2} and Cl{sub 2} guests in various cages to contrast the properties of these guests in the TS-I and CS-I phases. Quantum chemical partial geometry optimizations of Br{sub 2} and Cl{sub 2} guests in the hydrate cages using the M06-2X functional give short halogen-water distances compatible with values observed in X-ray diffraction experiments. NCI plots of guest-cage structures are generated to qualitatively show the relative strength of the non-bonding interactions between dihalogens and water molecules. The differences between behaviors of Br{sub 2} and Cl{sub 2} guests in the hydrate cages may explain why bromine forms the unique TS-I phase.

  5. Seasonal variation of bromine monoxide over the Rann of Kutch salt marsh seen from space

    Science.gov (United States)

    Hörmann, Christoph; Beirle, Steffen; Penning de Vries, Marloes; Sihler, Holger; Platt, Ulrich; Wagner, Thomas

    2015-04-01

    Bromine monoxide (BrO) is an important catalyst in the depletion of tropospheric and stratospheric ozone (O3). In the troposphere, reactive bromine can be released from sea ice, volcanoes, sea-salt aerosol or salt lakes. For all of these natural sources enhanced BrO vertical column densities (VCDs) have been successfully observed from ground using Differential Optical Absorption Spectroscopy (DOAS). Until now, satellite observations were only reported for polar regions during springtime and volcanic emissions (mostly for major eruptions). We present the first satellite observations of enhanced monthly mean BrO VCDs over a salt marsh, the Rann of Kutch (India/Pakistan), during 2004-2014 as seen by the Ozone Monitoring Instrument (OMI). The Rann of Kutch is a so-called 'seasonal' salt marsh. During India's summer monsoon (June/July - September/October), the flat desert of salty clay and mudflats, which average 15 meters above sea level, fills with standing rain and sea water. With more than 7500 km2 it is the largest salt desert in the world and additionally one of the hottest areas of India with summer temperatures around 50 ° C and winter temperatures decreasing below 0 ° C. Probably due to these rather extreme conditions, the Rann of Kutch has not been yet investigated for atmospheric composition measurements by ground-based instruments. Satellite observations, however, provide the unique possibility to investigate the entire area remotely over a long-time period. The OMI data reveals recurring maximum BrO VCDs during April/May, but no enhanced column densities during the monsoon season while the area is flooded. In the following months the signal only recovers slowly while the salty surface dries up. We discuss the possible effects of temperature, precipitation and relative humidity on the release of enhanced reactive bromine concentrations. In order to investigate a possible diurnal cycle of the BrO concentration, the OMI results (at a local overflight time

  6. Investigating the lifetime of bromine-quenched G.M. Counters with temperature

    Energy Technology Data Exchange (ETDEWEB)

    Abilama, Marc [Centronic Ltd., Croydon (United Kingdom); University of Surrey, Guildford (United Kingdom); Bates, Mike [Centronic Ltd., Croydon (United Kingdom); Lohstroh, Annika [University of Surrey, Guildford (United Kingdom)

    2015-09-21

    The amount of halogen quench gas as a percentage of the total fill gas contained within a gas-filled Geiger–Müller detector is directly linked to its operational characteristics. Preserving this halogen gas will help maintain the operating lifetime of the detectors. Such halogen gases are highly corrosive and the small quantities within a gas-filled detector can deplete rapidly via interactions with surrounding materials. The rate of interactions is thought to be proportional to not only temperature, but also to the current initiated by ionisation events associated with the formation of each signal pulse. As all pulses are of similar magnitudes, GM detector operational lifetimes are quantified in accumulated counts rather than a given operating time. We have studied three different types of corrosion-resistant mechanisms to protect the bromine halogen gas from any interactions with 446 stainless steel detector components of ZP1200 Geiger–Müller tubes at temperatures up to 125 °C. Three types of surface treatments for these detectors used were labelled as “raw” using only an oxygen-plasma-bombardment process, “passivated” using a combination of nitric acid passivation followed by an oxygen plasma-bombardment process, and thirdly plating with a few micron thickness of chromium followed by an oxygen plasma-bombardment process. 32 detector samples were irradiated at room temperature with a Caesium-137 source at dose rates of approximately 1.3 mSv/hr up to 5.7×10{sup 10} accumulated counts; another 32 detector samples were aged to 3.3×10{sup 10} counts at 125 °C. At room temperature, the chromium-plated samples exhibited an initial rise in their starting voltage readings. All other detector performance characteristics, for all detector types, did not change significantly during the ageing process, and the surface morphology of the detector cathodes was unaffected. At 125 °C, the chromium-based plating produced the most stable long-term response. These

  7. Air-snowpack exchange of bromine, ozone and mercury in the springtime Arctic simulated by the 1-D model PHANTAS - Part 1: In-snow bromine activation and its impact on ozone

    Science.gov (United States)

    Toyota, K.; McConnell, J. C.; Staebler, R. M.; Dastoor, A. P.

    2014-04-01

    To provide a theoretical framework towards a better understanding of ozone depletion events (ODEs) and atmospheric mercury depletion events (AMDEs) in the polar boundary layer, we have developed a one-dimensional model that simulates multiphase chemistry and transport of trace constituents from porous snowpack and through the atmospheric boundary layer (ABL) as a unified system. This paper constitutes Part 1 of the study, describing a general configuration of the model and the results of simulations related to reactive bromine release from the snowpack and ODEs during the Arctic spring. A common set of aqueous-phase reactions describes chemistry both within the liquid-like layer (LLL) on the grain surface of the snowpack and within deliquesced "haze" aerosols mainly composed of sulfate in the atmosphere. Gas-phase reactions are also represented by the same mechanism in the atmosphere and in the snowpack interstitial air (SIA). Consequently, the model attains the capacity of simulating interactions between chemistry and mass transfer that become particularly intricate near the interface between the atmosphere and the snowpack. In the SIA, reactive uptake on LLL-coated snow grains and vertical mass transfer act simultaneously on gaseous HOBr, a fraction of which enters from the atmosphere while another fraction is formed via gas-phase chemistry in the SIA itself. A "bromine explosion", by which HOBr formed in the ambient air is deposited and then converted heterogeneously to Br2, is found to be a dominant process of reactive bromine formation in the top 1 mm layer of the snowpack. Deeper in the snowpack, HOBr formed within the SIA leads to an in-snow bromine explosion, but a significant fraction of Br2 is also produced via aqueous radical chemistry in the LLL on the surface of the snow grains. These top- and deeper-layer productions of Br2 both contribute to the release of Br2 to the atmosphere, but the deeper-layer production is found to be more important for the

  8. Air-snowpack exchange of bromine, ozone and mercury in the springtime Arctic simulated by the 1-D model PHANTAS – Part 1: In-snow bromine activation and its impact on ozone

    Directory of Open Access Journals (Sweden)

    K. Toyota

    2013-08-01

    Full Text Available To provide a theoretical framework towards better understanding of ozone depletion events (ODEs and atmospheric mercury depletion events (AMDEs in the polar boundary layer, we have developed a one-dimensional model that simulates multiphase chemistry and transport of trace constituents from porous snowpack and through the atmospheric boundary layer (ABL as a unified system. In this paper, we describe a general configuration of the model and the results of simulations related to reactive bromine release from the snowpack and ODEs during the Arctic spring. The model employs a chemical mechanism adapted from the one previously used for the simulation of multiphase halogen chemistry involving deliquesced sea-salt aerosols in the marine boundary layer. A common set of aqueous-phase reactions describe chemistry both in the liquid-like (or brine layer on the grain surface of the snowpack and in "haze" aerosols mainly composed of sulfate in the atmosphere. The process of highly soluble/reactive trace gases, whether entering the snowpack from the atmosphere or formed via gas-phase chemistry in the snowpack interstitial air (SIA, is simulated by the uptake on brine-covered snow grains and subsequent reactions in the aqueous phase while being traveled vertically within the SIA. A "bromine explosion", by which, in a conventional definition, HOBr formed in the ambient air is deposited and then converted heterogeneously to Br2, is a dominant process of reactive bromine formation in the top 1 mm (or less layer of the snowpack. Deeper in the snowpack, HOBr formed within the SIA leads to an in-snow bromine explosion, but a significant fraction of Br2 is also produced via aqueous radical chemistry in the brine on the surface of the snow grains. These top- and deeper-layer productions of Br2 both contribute to the Br2 release into the atmosphere, but the deeper-layer production is found to be more important for the net outflux of reactive bromine. Although ozone

  9. Brominated flame retardants and organochlorine compounds in duplicate diet samples from a Portuguese academic community.

    Science.gov (United States)

    Coelho, Sónia D; Sousa, Ana C A; Isobe, Tomohiko; Kunisue, Tatsuya; Nogueira, António J A; Tanabe, Shinsuke

    2016-10-01

    Concentrations of persistent organic pollutants (POPs), including polybrominated diphenyl ethers (PBDEs), hexabromocyclododecanes (HBCDDs), polychlorinated biphenyls (PCBs), hexachlorocyclohexane isomers (HCHs), hexachlorobenzene (HCB), chlordane compounds (CHLs) and dichlorodiphenyltrichloroethane and its metabolites (DDTs), were measured in duplicate diet samples from 21 volunteers at a Portuguese academic community (University of Aveiro). Overall, the levels of the target compounds were low, with detection frequencies varying widely depending on the compounds and with brominated flame retardants (BFRs) registering the lowest detection frequencies. Among PCB congeners, nondioxin-like PCBs were predominant and detected in the majority of the samples. Organochlorine pesticides were also detected in the majority of the samples, with 100% detection for DDTs and HCHs. Estimated daily intakes (EDIs) were calculated using lower and upper bound estimations, and in both cases values were far below the currently established tolerable daily intakes for PCBs and OCs and the reference doses for PBDEs and HBCDDs. PMID:27367176

  10. Short-lived brominated hydrocarbons – observations in the source regions and the tropical tropopause layer

    Directory of Open Access Journals (Sweden)

    S. Brinckmann

    2012-02-01

    Full Text Available We conducted measurements of the five important short-lived organic bromine species in the marine boundary layer (MBL. Measurements were made in the Northern Hemisphere mid-latitudes (Sylt Island, North Sea in June 2009 and in the tropical Western Pacific during the TransBrom ship campaign in October 2009. For the one-week time series on Sylt Island, mean mixing ratios of CHBr3, CH2Br2, CHBr2Cl and CH2BrCl were 2.0, 1.1, 0.2, 0.1 ppt, respectively. We found maxima of 5.8 and 1.6 ppt for the two main components CHBr3 and CH2Br2. Along the cruise track in the Western Pacific (between 41° N and 13° S we measured mean mixing ratios of 0.9, 0.9, 0.2, 0.1 and 0.1 ppt for CHBr3, CH2Br2, CHBrCl2, CHBr2Cl and CH2BrCl. Air samples with coastal influence showed considerably higher mixing ratios than the samples with open ocean origin. Correlation analyses of the two data sets yielded strong linear relationships between the mixing ratios of four of the five species (except for CH2BrCl. Using a combined data set from the two campaigns and a comparison with the results from two former studies, rough estimates of the molar emission ratios between the correlated substances were: 9/1/0.35/0.35 for CHBr3/CH2Br2/CHBrCl2/CHBr2Cl. Additional measurements were made in the tropical tropopause layer (TTL above Teresina (Brazil, 5° S in June 2008, using balloon-borne cryogenic whole air sampling technique. Near the level of zero clear-sky net radiative heating (LZRH at 14.8 km about 2.25 ppt organic bromine was bound to the five short-lived species, making up 13% of total organic bromine (17.82 ppt. CH2Br2 (1.45 ppt and CHBr3 (0.56 ppt accounted for 90% of the budget of short-lived compounds in that region. Near the

  11. Responses of marine unicellular algae to brominated organic compounds in six growth media

    Energy Technology Data Exchange (ETDEWEB)

    Walsh, G.E.; Yoder, M.J.; McLaughlin, L.L.; Lores, E.M.

    1987-12-01

    Marine unicellular algae, Skeletonema costatum, Thalassiosira pseudonana, and Chlorella sp. were exposed to the industrial brominated compounds tetrabromobisphenol A, decabromobiphenyloxide (DBBO), hexabromocyclododecane (HBCD), pentabromomethylbenzene (PBMB), pentabromoethylbenzene (PBEB), and the herbicide bromoxynil (BROM), in six algal growth media. High concentrations of DBBO (1 mg liter-1), PBMB (1 mg liter-1), and PBEB (0.5 mg liter-1) reduced growth by less than 50%. EC50s of the other compounds varied with growth medium, with high EC50/low EC50 ratios between 1.3 and 9.9. Lowest EC50s, 9.3 to 12.0 micrograms liter-1, were obtained with S. costatum and HBCD. It is concluded that responses to toxicants in different media are the results of interactions among algae, growth medium, toxicant, and solvent carrier.

  12. Mercury oxidation from bromine chemistry in the free troposphere over the southeastern US

    Science.gov (United States)

    Coburn, Sean; Dix, Barbara; Edgerton, Eric; Holmes, Christopher D.; Kinnison, Douglas; Liang, Qing; ter Schure, Arnout; Wang, Siyuan; Volkamer, Rainer

    2016-03-01

    The elevated deposition of atmospheric mercury over the southeastern United States is currently not well understood. Here we measure partial columns and vertical profiles of bromine monoxide (BrO) radicals, a key component of mercury oxidation chemistry, to better understand the processes and altitudes at which mercury is being oxidized in the atmosphere. We use data from a ground-based MAX-DOAS instrument located at a coastal site ˜ 1 km from the Gulf of Mexico in Gulf Breeze, FL, where we had previously detected tropospheric BrO (Coburn et al., 2011). Our profile retrieval assimilates information about stratospheric BrO from the WACCM chemical transport model (CTM), and uses only measurements at moderately low solar zenith angles (SZAs) to estimate the BrO slant column density contained in the reference spectrum (SCDRef). The approach has 2.6 degrees of freedom, and avoids spectroscopic complications that arise at high SZA; knowledge about SCDRef further helps to maximize sensitivity in the free troposphere (FT). A cloud-free case study day with low aerosol load (9 April 2010) provided optimal conditions for distinguishing marine boundary layer (MBL: 0-1 km) and free-tropospheric (FT: 1-15 km) BrO from the ground. The average daytime tropospheric BrO vertical column density (VCD) of ˜ 2.3 × 1013 molec cm-2 (SZA < 70°) is consistent with our earlier reports on other days. The vertical profile locates essentially all tropospheric BrO above 4 km, and shows no evidence for BrO inside the MBL (detection limit < 0.5 pptv). BrO increases to ˜ 3.5 pptv at 10-15 km altitude, consistent with recent aircraft observations. Our case study day is consistent with recent aircraft studies, in that the oxidation of gaseous elemental mercury (GEM) by bromine radicals to form gaseous oxidized mercury (GOM) is the dominant pathway for GEM oxidation throughout the troposphere above Gulf Breeze. The column integral oxidation rates are about 3.6 × 105 molec cm-2 s-1 for bromine

  13. Bioactive brominated diterpenes from the marine red alga Jania Rubens (L.) Lamx.

    Science.gov (United States)

    Awad, Nagwa E

    2004-04-01

    Seven brominated diterpenes of the parguerene and isoparguerene series were isolated for the first time from the red alga Jania rubens (L.) Lamx., collected from the Red Sea coast at Hurghada, Egypt. The diterpenes were identified as isoparguerol (1), isoparguerol-16-acetate (2), isoparguerol-7,16-diacetate (3), parguerol-16-acetate (4), parguerol-7,16-diacetate (5), deoxyparguerol (6) and deoxyparguerol-7-acetate (7). The isolated diterpenes had a marked antitumour activity. Isoparguerol derivatives were slightly more effective than parguerol derivatives. Moreover, the data implied that the cytotoxicity of these compounds were dependent on the number of acetoxy groups. Also, anthelmintic activities of the isolated compounds on earthworms (Allolobophora caliginosa) were studied. PMID:15162360

  14. Thinning of CIGS solar cells: Part I: Chemical processing in acidic bromine solutions

    Energy Technology Data Exchange (ETDEWEB)

    Bouttemy, M.; Tran-Van, P. [Institut Lavoisier de Versailles (ILV-UMR 8180 CNRS/UVSQ), 45 av. des Etats Unis, 78035 Versailles (France); Gerard, I., E-mail: gerard@chimie.uvsq.fr [Institut Lavoisier de Versailles (ILV-UMR 8180 CNRS/UVSQ), 45 av. des Etats Unis, 78035 Versailles (France); Hildebrandt, T.; Causier, A. [Institut Lavoisier de Versailles (ILV-UMR 8180 CNRS/UVSQ), 45 av. des Etats Unis, 78035 Versailles (France); Pelouard, J.L.; Dagher, G. [Laboratoire de Photonique et de Nanostructures (LPN-CNRS), route de Nozay 91460 Marcoussis (France); Jehl, Z.; Naghavi, N. [Institut de Recherche et Developpement sur l' Energie Photovoltaique (IRDEP -UMR 7174 CNRS/EDF/Chimie-ParisTech), 6 quai Watier, 78401 Chatou (France); Voorwinden, G.; Dimmler, B. [Wuerth Elektronik Research GmbH, Industriestr. 4, 70565 Stuttgart (Germany); Powalla, M. [Zentrum fuer Sonnenenergie- und Wasserstoff-Forschung (ZSW), Industriestr. 6, 70565 Stuttgart (Germany); Guillemoles, J.F. [Institut de Recherche et Developpement sur l' Energie Photovoltaique (IRDEP -UMR 7174 CNRS/EDF/Chimie-ParisTech), 6 quai Watier, 78401 Chatou (France); Lincot, D. [Laboratoire de Photonique et de Nanostructures (LPN-CNRS), route de Nozay 91460 Marcoussis (France); Etcheberry, A. [Institut Lavoisier de Versailles (ILV-UMR 8180 CNRS/UVSQ), 45 av. des Etats Unis, 78035 Versailles (France)

    2011-08-31

    CIGSe absorber was etched in HBr/Br{sub 2}/H{sub 2}O to prepare defined thicknesses of CIGSe between 2.7 and 0.5 {mu}m. We established a reproducible method of reducing the absorber thickness via chemical etching. We determine the dissolution kinetics rate of CIGSe using trace analysis by graphite furnace atomic absorption spectrometry of Ga and Cu. The roughness of the etching surface decreases during the first 500 nm of the etching to a steady state value of the root-mean-square roughness near 50 nm. X-ray photoelectron spectroscopy analyses demonstrate an etching process occurring with a constant chemical composition of the treated surface acidic bromine solutions provide a controlled chemical thinning process resulting in an almost flat surface and a very low superficial Se{sup 0} enrichment.

  15. Surface-confined 2D polymerization of a brominated copper-tetraphenylporphyrin on Au(111)

    CERN Document Server

    Smykalla, Lars; Korb, Marcus; Lang, Heinrich; Hietschold, Michael

    2015-01-01

    A coupling-limited approach for the Ullmann reaction-like on-surface synthesis of a two-dimensional covalent organic network starting from a halogenated metallo-porphyrin is demonstrated. Copper-octabromo-tetraphenylporphyrin molecules can diffuse and self-assemble when adsorbed on the inert Au(111) surface. Splitting-off of bromine atoms bonded at the macrocyclic core of the porphyrin starts at room temperature after the deposition and is monitored by X-ray photoelectron spectroscopy for different annealing steps. Direct coupling between the reactive carbon sites of the molecules is, however, hindered by the molecular shape. This leads initially to an ordered non-covalently interconnected supramolecular structure. Further heating to 300{\\deg}C and an additional hydrogen dissociation step is required to link the molecular macrocycles via a phenyl group and form large ordered polymeric networks. This approach leads to a close-packed covalently bonded network of overall good quality. The structures are characte...

  16. UTILIZATION OF BROMINATION REACTION FOR THE SPECTROPHOTOMETRIC ASSAY OF DOMPERIDONE IN PHARMACEUTICALS

    Directory of Open Access Journals (Sweden)

    O. ZENITA DEVI

    2011-03-01

    Full Text Available Three simple and sensitive spectrophotometric methods are described for the determination of domperidone (DOM in bulk drug and in dosage forms using bromate-bromide mixture as brominating agent in acid medium and three dyes, meta-cresol purple (MCP, amaranth (AMR and erioglaucine (EGC. The methods involve the addition of a known excess of bromate-bromide mixture to an acidified solution of DOM followed by the determination of the residual bromine by reacting with a fixed amount of either MCP dye and measuring the absorbance at 530 nm (method A or AMR dye and measuring the absorbance at 520 nm (method B or EGC dye and measuring the absorbance at 630 nm (method C. Beer’s law is obeyed over the concentration ranges, 0.63–10.0, 0.25-4.0 and 0.13-2.0 µg mL-1 for method A, B and C, respectively. The ap¬parent molar absorptivities are calculated to be 3.751x104, 6.604x104 and 1.987x105 L mol-1cm-1 for method A, B and C, respectively, and the corresponding sandell sensitivity values are 0.011, 0.006 and 0.002 μg cm-2. The limit of detection and the limit of quantification are also reported for all the three methods. No interference was observed from common additives found in pharmaceutical preparations. Statistical comparisons of the results with those of the reference method showed excellent agreement, and indicated no significant difference in accuracy and precision. The accuracy and reliability of the methods were further ascertained by performing recovery tests via standardaddition technique.

  17. Associations between brominated flame retardants in house dust and hormone levels in men

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Paula I. [Department of Environmental Health Sciences, University of Michigan, 1415 Washington Heights, Ann Arbor, MI 48109 (United States); Stapleton, Heather M. [Nicholas School of the Environment, Box 90328, Duke University, Durham, NC 27708 (United States); Mukherjee, Bhramar [Department of Biostatistics, University of Michigan, 1415 Washington Heights, Ann Arbor, MI 48109 (United States); Hauser, Russ [Department of Environmental Health, Harvard School of Public Health, 677 Huntington Ave., Boston, MA 02115 (United States); Meeker, John D., E-mail: meekerj@umich.edu [Department of Environmental Health Sciences, University of Michigan, 1415 Washington Heights, Ann Arbor, MI 48109 (United States)

    2013-02-15

    Brominated flame retardants (BFRs) are used in the manufacture of a variety of materials and consumer products in order to meet fire safety standards. BFRs may persist in the environment and have been detected in wildlife, humans and indoor dust and air. Some BFRs have demonstrated endocrine and reproductive effects in animals, but human studies are limited. In this exploratory study, we measured serum hormone levels and flame retardant concentrations [31 polybrominated diphenyl ether (PBDE) congeners and 6 alternate flame retardants] in house dust from men recruited through a US infertility clinic. PBDE congeners in dust were grouped by commercial mixtures (i.e. penta-, octa- and deca-BDE). In multivariable linear regression models adjusted by age and body mass index (BMI), significant positive associations were found between house dust concentrations of pentaBDEs and serum levels of free T4, total T3, estradiol, and sex hormone binding globulin (SHBG), along with an inverse association with follicle stimulating hormone (FSH). There were also positive associations of octaBDE concentrations with serum free T4, thyroid stimulating hormone (TSH), luteinizing hormone (LH) and testosterone and an inverse association of decaBDE concentrations with testosterone. Hexabromocyclododecane (HBCD) was associated with decreased SHBG and increased free androgen index. Dust concentrations of bis-tribromophenoxyethane (BTBPE) and tetrabromo-diethylhexylphthalate (TBPH) were positively associated with total T3. These findings are consistent with our previous report of associations between PBDEs (BDE 47, 99 and 100) in house dust and hormone levels in men, and further suggest that exposure to contaminants in indoor dust may be leading to endocrine disruption in men. - Highlights: ► Brominated flame retardants (BFRs) including PBDEs and alternates were measured. ► Exposure to BFRs is characterized from concentrations in participant vacuum bag dust. ► Exposure to PBDEs and

  18. Associations between brominated flame retardants in house dust and hormone levels in men

    International Nuclear Information System (INIS)

    Brominated flame retardants (BFRs) are used in the manufacture of a variety of materials and consumer products in order to meet fire safety standards. BFRs may persist in the environment and have been detected in wildlife, humans and indoor dust and air. Some BFRs have demonstrated endocrine and reproductive effects in animals, but human studies are limited. In this exploratory study, we measured serum hormone levels and flame retardant concentrations [31 polybrominated diphenyl ether (PBDE) congeners and 6 alternate flame retardants] in house dust from men recruited through a US infertility clinic. PBDE congeners in dust were grouped by commercial mixtures (i.e. penta-, octa- and deca-BDE). In multivariable linear regression models adjusted by age and body mass index (BMI), significant positive associations were found between house dust concentrations of pentaBDEs and serum levels of free T4, total T3, estradiol, and sex hormone binding globulin (SHBG), along with an inverse association with follicle stimulating hormone (FSH). There were also positive associations of octaBDE concentrations with serum free T4, thyroid stimulating hormone (TSH), luteinizing hormone (LH) and testosterone and an inverse association of decaBDE concentrations with testosterone. Hexabromocyclododecane (HBCD) was associated with decreased SHBG and increased free androgen index. Dust concentrations of bis-tribromophenoxyethane (BTBPE) and tetrabromo-diethylhexylphthalate (TBPH) were positively associated with total T3. These findings are consistent with our previous report of associations between PBDEs (BDE 47, 99 and 100) in house dust and hormone levels in men, and further suggest that exposure to contaminants in indoor dust may be leading to endocrine disruption in men. - Highlights: ► Brominated flame retardants (BFRs) including PBDEs and alternates were measured. ► Exposure to BFRs is characterized from concentrations in participant vacuum bag dust. ► Exposure to PBDEs and

  19. Scientific Opinion on Emerging and Novel Brominated Flame Retardants (BFRs in Food

    Directory of Open Access Journals (Sweden)

    EFSA Panel on Contaminants in the Food Chain (CONTAM

    2012-10-01

    Full Text Available EFSA was asked to deliver a scientific opinion on brominated flame retardants (BFRs other than PBDEs, PBBs, HBCDDs, TBBPA and brominated phenols and their derivatives. The BFRs that are the subject of the current opinion, were classified in groups termed ‘emerging’ and ‘novel’ BFRs. Information on 17 emerging and 10 novel BFRs was collected. The information varied widely for these BFRs. There is a lack of experimental data on physico-chemical characteristics, stability/reactivity and current use and production volume of all the emerging and novel BFRs. Due to the very limited information on occurrence, exposure and toxicity, the CONTAM Panel could not perform a risk characterisation for any of the BFRs considered. Instead, an attempt was made to identify those BFRs that could be a potential health concern and should be considered first for future investigations. For this purpose the Panel first evaluated the available experimental data on occurrence in food, behaviour in the environment and toxicity. Secondly, a modelling exercise was performed focussing on the potential of the emerging and novel BFRs for persistence in the environment and for their possible bioaccumulation potential. There is convincing evidence that tris(2,3-dibromopropyl phosphate (TDBPP and dibromoneopentyl glycol (DBNPG are genotoxic and carcinogenic, warranting further surveillance of their occurrence in the environment and in food. Based on the limited experimental data on environmental behaviour, 1,2-bis(2,4,6-tribromophenoxyethane (BTBPE and hexabromobenzene (HBB were identified as compounds that could raise a concern for bioaccumulation. For the modelling exercise, the CONTAM Panel selected two environmental characteristics, overall persistence and potential for bioaccumulation, as being most relevant to provide insight into the possibility that emerging or novel BFRs might accumulate in the food chain, and thus might appear in food intended for human

  20. Meteorological controls on the vertical distribution of bromine monoxide in the lower troposphere

    Directory of Open Access Journals (Sweden)

    P. K. Peterson

    2014-09-01

    Full Text Available Multiple axis differential absorption spectroscopy (MAX-DOAS measurements of bromine monoxide (BrO probed the vertical structure of halogen activation events during March–May 2012 at Barrow, Alaska. An analysis of the BrO averaging kernels and degrees of freedom obtained by optimal-estimation-based inversions from raw MAX-DOAS measurements reveals the information is best represented by reducing the retrieved BrO profile to two quantities, the integrated column from the surface through 200 m (VCD200 m, and the lower tropospheric vertical column density (LT-VCD which represents the integrated column of BrO from the surface through 2 km. The percentage of lower-tropospheric BrO in the lowest 200 m was found to be highly variable ranging from shallow layer events, where BrO is present primarily in the lowest 200 m to distributed column events where BrO is observed at higher altitudes. The highest observed LT-VCD events occurred when BrO was distributed throughout the lower troposphere, rather than concentrated near the surface. Atmospheric stability in the lowest 200 m influenced the percentage of LT-VCD that is in the lowest 200 m, with inverted temperature structures having a first-to-third quartile range (Q1–Q3 of VCD200 m/LT-VCD from 15–39% while near neutral temperature structures had a Q1–Q3 range of 7–13%. Data from this campaign show no clear influence of wind speed on either lower-tropospheric bromine activation (LT-VCD or the vertical distribution of BrO, while examination of seasonal trends and the temperature dependence of the vertical distribution supported the conclusion that the atmospheric stability affects the vertical distribution of BrO.

  1. Synthesis of 1-Bromo-3-methoxy-4-propoxy-5-iodobenzene-A Novel Efficient Process for the Synthesis of Brominated Aromatic Compound

    Institute of Scientific and Technical Information of China (English)

    Hong Xin SHI; Hui LIN; Gérard MANDVILLE

    2004-01-01

    The reaction of aromatic carboxylic acid with oxalyl chloride gives rise to the corres- ponding acid chloride which without purification is treated with the sodium salt of mercapto- pyridine oxide in the presence of 2,2-azo-bisisobutyronitrile (AIBN), radical initiator to give a brominated aromatic compound. After etherification and oxidation, 5-iodovaniline was converted to trisubstituted benzene carboxylic acid which give 1-bromo-3-methoxy-4-propoxy-5-iodo- benzene by this new brominating process with a yield of 74 %.

  2. Prenatal Exposure to Organohalogens, Including Brominated Flame Retardants, Influences Motor, Cognitive, and Behavioral Performance at School Age

    OpenAIRE

    Roze, Elise; Meijer, Lisethe; Bakker, Attie; Van Braeckel, Koenraad N. J. A.; Sauer, Pieter J. J.; Bos, Arend F

    2009-01-01

    Background Organohalogen compounds (OHCs) are known to have neurotoxic effects on the developing brain. Objective We investigated the influence of prenatal exposure to OHCs, including brominated flame retardants, on motor, cognitive, and behavioral outcome in healthy children of school age. Methods This study was part of the prospective Groningen infant COMPARE (Comparison of Exposure-Effect Pathways to Improve the Assessment of Human Health Risks of Complex Environmental Mixtures of Organoha...

  3. The mercury species and their association with carbonaceous compositions, bromine and iodine in PM2.5 in Shanghai.

    Science.gov (United States)

    Duan, Lian; Xiu, Guangli; Feng, Ling; Cheng, Na; Wang, Chenggang

    2016-03-01

    PM2.5 samples were collected in south Shanghai from November 2013 to October 2014. The species of particulate bounded mercury (PBM), including hydrochloric soluble particle-phase mercury (HPM), element soluble particle-phase mercury (EPM) and residual soluble particle-phase mercury (RPM), were determined in PM2.5. The chemical composition of PM2.5 including organic carbon (OC) and elemental carbon (EC), total bromine and iodine were also analyzed. The results showed that the annual average concentration of PBM was 0.30 ± 0.31 ng m(-3) and 0.34 ± 0.32 ng m(-3) in winter, 0.31 ± 0.19 ng m(-3) in spring, 0.30 ± 0.45 ng m(-3) in fall and 0.28 ± 0.17 ng m(-3) in summer. HPM took the highest fraction 51.2% in PBM, followed by RPM 27.7% and EPM 21.1%. EC positively correlated to particle mercury, especially in winter (r = 0.70), the same for OC in winter (r = 0.72), which indicated that the carbonaceous composition may affect the transformation of Hg in the atmosphere. Mercury species showed different correlations with bromine and iodine in the four seasons. The strongest correlation between bromine, iodine and mercury was found in spring and fall, respectively. Bromine showed the stronger correlation with total mercury and speciated particle mercury than iodine. In addition, the days were classified into haze and non-haze days based on the visibility and relative humidity, while the ratio of HPM in haze days was much higher than that in non-haze days. EC strongly correlated with PBM during haze and non-haze days while OC only positively correlated with PBM in non-haze days, this may indicate that the different carbonaceous part may affect PBM differently.

  4. Bromine monoxide/sulphur dioxide ratios in relation to volcanological observations at Mt. Etna 2006–2009

    OpenAIRE

    N. Bobrowski; Giuffrida, G

    2012-01-01

    Over a three year period, from 2006 to 2009, frequent scattered sun light DOAS measurements were conducted at Mt. Etna in a distance of around six kilometres downwind from the summit craters. During the same period and in addition to these measurements, volcanic observations were made by regularly visiting various parts of Mt. Etna.

    Results from these measurements and observations are presented and their relation is discussed. The focus of the investigation is the bromin...

  5. Sensitive Spectrophotometric Determination of Atenolol in Pharmaceutical Formulations Using Bromate-Bromide Mixture as an Eco-Friendly Brominating Agent

    Directory of Open Access Journals (Sweden)

    Kudige N. Prashanth

    2012-01-01

    Full Text Available Three simple and sensitive spectrophotometric methods are proposed for the determination of atenolol (ATN in bulk drug and tablets. The methods are based on the bromination of ATN by the bromine generated in situ by the action of the acid on the bromate–bromide mixture followed by the determination of unreacted bromine by reacting with a fixed amount of either meta-cresol purple (MCP and measuring the absorbance at 540 nm (method A and 445 nm (method B or erioglaucine (EGC and measuring the absorbance at 630 nm (method C. Beer's law is valid within the concentration ranges of 1.0–20.0, 2.0–40.0 and 1.0–8.0 μg/mL for method A, method B and method C, respectively. The calculated molar absorptivities were found to be 1.20×104, 4.51×103 and 3.46×104  L/mol⋅cm for method A, method B and method C, respectively. Sandell’s sensitivity values, correlation coefficients, limits of detection and quantification are also reported. Recovery results were statistically compared with those of a reference method by applying Student’s t- and F-test. The novelty of the present study is the measurement of two different colors using MCP, that is, red-pink color of MCP in acid medium at 540 nm and yellowish-orange color of brominated MCP at 445 nm.

  6. Utilization of a Green Brominating Agent for the Spectrophotometric Determination of Pipazethate HCl in Pure Form and Pharmaceutical Preparations

    Directory of Open Access Journals (Sweden)

    Ayman A. Gouda

    2013-01-01

    Full Text Available Five simple, accurate, and sensitive spectrophotometric methods (A–E have been described for the indirect assay of pipazethate HCl (PZT either in pure form or in pharmaceutical preparations. The proposed methods are based on the bromination of pipazethate HCl with a solution of excess bromate-bromide mixture in hydrochloric acid medium and subsequent estimation of the residual bromine by different reaction schemes. In the first three methods (A–C, the determination of the residual bromine is based on its ability to bleach the color of methyl orange, indigo carmine, or thymol blue dyes and measuring the absorbance at 520, 610, and 550 nm for methods A, B, and C, respectively. Methods D and E involves treating the unreacted bromine with a measured excess of iron(II, and the remaining iron(II is complexed with 1,10-phenanthroline, and the increase in absorbance is measured at 510 nm for method D and the resulting iron(III is complexed with thiocyanate and the absorbance is measured at 480 nm for method E. The different experimental parameters affecting the development and stability of the color are carefully studied and optimized. Regression analysis of the Beer-Lambert plots showed good correlation in the concentration ranges of 0.5–8.0 μg . The apparent molar absorptivity, Sandell's sensitivity, detection and quantitation limits were evaluated. The proposed methods have been applied and validated successfully for the analysis of the drug in its pure form and pharmaceutical formulations with mean recoveries of 99.94%–100.15% and relative standard deviation ≤1.53. No interference was observed from a common pharmaceutical adjuvant. Statistical comparison of the results with the reference method shows excellent agreement and indicates no significant difference in accuracy and precision.

  7. An Empirical Approach to Determining the Boundary Layer Bromine Monoxide (BrO) Abundance from Satellite Total Column Measurements

    Science.gov (United States)

    Simpson, W. R.; Donohoue, D.; Carlson, D. A.

    2009-12-01

    Unique chemistry in the Arctic boundary layer during springtime liberates bromine from sea salt, producing reactive halogen gases (e.g. atomic bromine and bromine monoxide radicals) that then drastically alter atmospheric oxidation pathways. This phenomenon causes ozone depletion events and affects mercury deposition to the snowpack. Satellite remote sensing (e.g. OMI and GOME2 observations) techniques can detect the total column abundance of BrO, which is generally the primary species of the reactive bromine family. However, BrO is also present in the stratosphere, so it is necessary to partition the satellite-observed BrO column abundance into boundary layer and non-boundary layer (primarily stratospheric) partial columns to be able to infer boundary layer abundances and hence chemical affects near the Earth's surface (i.e. ozone and mercury impacts). In this presentation, we describe an empirical method for partitioning the BrO total column and apply it globally during spring 2008. The method indicates that some BrO total column enhancements ("hotspots") are not actually enhancements in the boundary layer BrO abundance but occur aloft. Movies and a statistical analysis of the inferred boundary layer BrO abundance are presented. The method has been tested and performs well at the Barrow field site. However, in areas that lack routine ground truth BrO measurements (e.g. Hudson Bay, Canada), large tropospheric BrO abundances are indicated. It is not clear if these inferred boundary layer BrO events are real or if the simple empirical method described here is failing in those locations. Verification of this method over large spatial regions of the Arctic is needed.

  8. Comparison of Nuclear Activation Methods for Bromine. Instrumental Analyses of Pesticides in Plant Materials Close to the Limit of Sensitivity

    International Nuclear Information System (INIS)

    There has been worldwide interest in pesticide residue analysis for control and ecological purposes. Although several agricultural research establishments have in the past developed suitable radioisotope tracer techniques to detect and remove organic pesticides from food, suitable micro-analytical techniques for the measurement of traces of toxic elements present in these materials have not been available. In cooperation with the United States Department of Agriculture, Plant Pest Control Laboratory, an investigation has been conducted on the use of neutron activation techniques for determining bromine, arsenic and mercury residues in soils, foliage, fruit, and vegetable materials. This paper discusses the various instrumental and data reduction techniques which were developed to measure traces of bromine by neutron activation methods, especially those employed in the limit of sensitivity range wherein special statistical methods are necessary. A large number of samples of soils, foliage, orange and vegetable materials, activated in the Texas A and M Research Reactor were counted at appropriate times after activation using three different counting systems: firstly, an automated system with an Nal (Tl) spectrometer; secondly, a 2 cm3 Ge(Li) solid-state detector connected to a Victoreen 3200-channel analyzer; and thirdly a slow γ-γ coincidence unit. The spectral data from the automated system were reduced by the AA-6 least squares method, and alternatively by means of computer spectrum stripping and peak area computation methods. The photopeak activities from the solid-state detector spectra were measured by the peak area method. The results obtained from the three counting systems using different data reduction techniques were compared to determine the best for the measurement of bromine concentration in the limit-of-sensitivity range. The γ-γ coincidence counting technique appears to have advantages in measuring the bromine content even in the ppm range in

  9. An investigation into the sensitivity of the atmospheric chlorine and bromine loading using a globally averaged mass balance model

    Science.gov (United States)

    Dowdell, David C.; Matthews, G. Peter; Wells, Ian

    Two globally averaged mass balance models have been developed to investigate the sensitivity and future level of atmospheric chlorine and bromine as a result of the emission of 14 chloro- and 3 bromo-carbons. The models use production, growth, lifetime and concentration data for each of the halocarbons and divide the production into one of eight uses, these being aerosol propellants, cleaning agents, blowing agents in open and closed cell foams, non-hermetic and hermetic refrigeration, fire retardants and a residual "other" category. Each use category has an associated emission profile which is built into the models to take into account the proportion of halocarbon retained in equipment for a characteristic period of time before its release. Under the Montreal Protocol 3 requirements, a peak chlorine loading of 3.8 ppb is attained in 1994, which does not reduce to 2.0 ppb (the approximate level of atmospheric chlorine when the ozone hole formed) until 2053. The peak bromine loading is 22 ppt, also in 1994, which decays to 12 ppt by the end of next century. The models have been used to (i) compare the effectiveness of Montreal Protocols 1, 2 and 3 in removing chlorine from the atmosphere, (ii) assess the influence of the delayed emission assumptions used in these models compared to immediate emission assumptions used in previous models, (iii) assess the relative effect on the chlorine loading of a tightening of the Montreal Protocol 3 restrictions, and (iv) calculate the influence of chlorine and bromine chemistry as well as the faster phase out of man-made methyl bromide on the bromine loading.

  10. [Formation of disinfection by-products by Microcystis aeruginosa intracellular organic matter: comparison between chlorination and bromination].

    Science.gov (United States)

    Tian, Chuan; Guo, Ting-Ting; Liu, Rui-Ping; Jefferson, William; Liu, Hui-Juan; Qu, Jiu-Hui

    2013-11-01

    In order to illustrate the effects of released algal organic matter in cyanobacteria blooms on raw water quality and water treatment process, intracellular organic matter (IOM) of Microcystis aeruginosa, which is the dominant species in cyanobacteria blooms, was chosen as a precursor and characterized. In addition, the transformation of IOM and the formation of disinfection byproducts were evaluated at different pH of 6.5, 7.1 and 8.4 after chlorination or bromination, with subsequent correlation analysis. The results indicated that IOM was primarily composed of macromolecular matter, i. e. , the species with relative molecular weight of > 30 x 10(3), constituting 68.8% of dissolved organic carbon (DOC). Fluorescence excitation-emission matrix indicated that IOM was mainly composed of aromatic protein-like matter with an intensity of 92.6 AU x L x mg(-1). After reaction with chlorine or bromine, the intensity of aromatic protein-like peaks decreased sharply by 76.6% - 93.3%, and its reduction correlated well with the formation of trihalomethane (THMs, R2 = 0.81) and haloacetic acid (HAAs, R2 = 0.77). The formation of THMs and HAAs increased with the increase in pH. Compared with chlorine, bromine formed more THMs and HAAs, and tended to form highly halogenated HAAs. However, with increasing pH, the reactivity with IOM between chlorine and bromine was closer, i.e, k(OBr-IOM)/k(OCl-(IOM) < k(HOBr-IOM/k(HOCl-IOM).

  11. Occurrence of brominated flame retardants in black thermo cups and selected kitchen utensils purchased on the European market.

    Science.gov (United States)

    Samsonek, J; Puype, F

    2013-01-01

    In order to screen for the presence of a recycled polymer waste stream from waste electric and electronic equipment (WEEE), a market survey was conducted on black plastic food-contact articles (FCA). An analytical method was applied combining X-ray fluorescence spectrometry (XRF) with thermal desorption gas chromatography coupled with mass spectrometry (thermal desorption GC-MS). Firstly, XRF spectrometry was applied to distinguish bromine-positive samples. Secondly, bromine-positive samples were submitted for identification by thermal desorption GC-MS. Generally, the bromine-positive samples contained mainly technical decabromodiphenyl ether (decaBDE). Newer types of BFRs such as tetrabromobisphenol A (TBBPA), tetrabromobisphenol A bis(2,3-dibromopropyl), ether (TBBPA-BDBPE) and decabromodiphenylethane (DBDPE), replacing the polybrominated diphenyleters (PBDEs) and polybrominated diphenyls (PBBs), were also identified. In none of the tested samples were PBBs or hexabromocyclododecane (HBCD) found. Polymer identification was carried out using Fourier-transformed infrared spectroscopy measurement (FTIR) on all samples. The results indicate that polypropylene-polyethylene copolymers (PP-PE) and mainly styrene-based food-contact materials, such as acrylonitrile-butadiene-styrene (ABS) have the highest risk of containing BFRs. PMID:24040839

  12. Bromination of Graphene: A New Route to Making High Performance Transparent Conducting Electrodes with Low Optical Losses

    KAUST Repository

    Mansour, Ahmed E.

    2015-07-22

    The unique optical and electrical properties of graphene have triggered great interest in its application as a transparent conducting electrode material and significant effort has been invested in achieving high conductivity while maintaining transparency. Doping of graphene has been a popular route for reducing its sheet resistance, but this has typically come at a significant cost in optical transmission. We demonstrate doping of few layers graphene with bromine as a means of enhancing the conductivity via intercalation without major optical losses. Our results demonstrate the encapsulation of bromine leads to air-stable transparent conducting electrodes with five-fold improvement of sheet resistance reaching at the cost of only 2-3% loss of optical transmission. The remarkably low tradeoff in optical transparency leads to the highest enhancements in the figure of merit reported thus far for FLG. Furthermore, we tune the workfunction by up to 0.3 eV by tuning the bromine content. These results should help pave the way for further development of graphene as a potential substitute to transparent conducting polymers and metal oxides used in optoelectronics, photovoltaics and beyond.

  13. Occurrence of PBDEs and other alternative brominated flame retardants in sludge from wastewater treatment plants in Korea.

    Science.gov (United States)

    Lee, Sunggyu; Song, Geum-Ju; Kannan, Kurunthachalam; Moon, Hyo-Bang

    2014-02-01

    Studies on the occurrence of polybrominated diphenyl ethers (PBDEs) and other alternative brominated flame retardants in the environment are scarce. In this study, PBDEs and non-PBDE brominated flame retardants (NBFRs), including decabromodiphenyl ethane (DBDPE) and 1,2-bis(2,4,6-tribromophenoxy)ethane (BTBPE), were measured in sludge collected from three types of wastewater treatment plants (WWTPs) in Korea. Total concentrations of PBDEs (∑PBDE) in sludge ranged from 298 to 48,000 (mean: 3240) ng/g dry weight. Among 10 NBFRs analyzed, DBDPE and BTBPE were the only ones detected in sludge samples. Concentrations of DBDPE and BTBPE ranged from parametric multidimensional scaling ordination showed that congener profiles of PBDEs in sludge are dependent on the types of WWTPs. Almost all sludge samples contained a low ratio (mean: 0.18) of DBDPE/BDE 209, indicating an on-going contamination by PBDEs in Korea. However, the high ratios (>1) of DBDPE/BDE 209 were found in sludge from I-WWTPs, reflecting a shift in the usage pattern of BFRs by the Korean industry. The nationwide annual emission fluxes of ∑PBDE, DBDPE and BTBPE via WWTPs to the environment were estimated to be 7400, 480, and 3.7 kg/year, respectively. This is the first study on the occurrence of alternative brominated flame retardants in sludge from Korea. PMID:23993837

  14. Brominated flame retardants in the surrounding soil of two manufacturing plants in China: Occurrence, composition profiles and spatial distribution.

    Science.gov (United States)

    Li, Wen-Long; Liu, Li-Yan; Zhang, Zi-Feng; Song, Wei-Wei; Huo, Chun-Yan; Qiao, Li-Na; Ma, Wan-Li; Li, Yi-Fan

    2016-06-01

    Surface soil samples were collected surrounding two brominated flame retardants (BFRs) manufacturing plants in China in August 2014 and analyzed for 23 polybrominated diphenyl ethers (PBDEs) and 8 novel brominated flame retardants (NBFRs). BDE209 and decabromodiphenylethane (DBDPE) were the predominant compounds in soil with the median levels of 1600 and 560 ng/g dw, respectively. The PBDEs profiles in soil samples were consistent with that of commercial product (comDecaBDE). The percentage contributions to total PBDEs decreased from higher to lower brominated homologues. Lower concentrations of NBFRs (excluding DBDPE) were detected in soil surrounding the two plants, suggesting they are byproducts or degradation products of the manufacturing activities. The concentrations of most BFRs dropped exponentially within 3-5 km of the manufacturing plants, suggesting recent deposition of these compounds to the soil. Directional distribution indicated that PBDEs and DBDPE concentrations were highest in the north direction of Plants 1. Three-day air parcel forward trajectories confirmed that the air parcel was responsible for the higher concentration of BFRs in the soil of north direction of the plant.

  15. Investigation of the Stratospheric Bromine Chemistry by Balloon-Borne Spectroscopic Observations and Photochemical Modelling: A Case Study of J(BrONO2) / k[BrO][NO2

    OpenAIRE

    Kreycy, Sebastian

    2013-01-01

    Besides chlorine, bromine is the second most important halogen when it comes to the destruction of ozone in the stratosphere. Although 150 times more chlorine than bromine is transported into the stratosphere, the higher ozone-depleting efficiency of bromine (by a factor of 45) makes it very important for catalytic cycles. In this study, balloon-borne DOAS (Differential Optical Absorption Spectroscopy) measurements of direct sunlight and limb measurements of scattered skylight, recorded...

  16. Theoretical study of the reaction kinetics of atomic bromine with tetrahydropyran

    KAUST Repository

    Giri, Binod

    2015-02-12

    A detailed theoretical analysis of the reaction of atomic bromine with tetrahydropyran (THP, C5H10O) was performed using several ab initio methods and statistical rate theory calculations. Initial geometries of all species involved in the potential energy surface of the title reaction were obtained at the B3LYP/cc-pVTZ level of theory. These molecular geometries were reoptimized using three different meta-generalized gradient approximation (meta-GGA) functionals. Single-point energies of the stationary points were obtained by employing the coupled-cluster with single and double excitations (CCSD) and fourth-order Møller-Plesset (MP4 SDQ) levels of theory. The computed CCSD and MP4(SDQ) energies for optimized structures at various DFT functionals were found to be consistent within 2 kJ mol-1. For a more accurate energetic description, single-point calculations at the CCSD(T)/CBS level of theory were performed for the minimum structures and transition states optimized at the B3LYP/cc-pVTZ level of theory. Similar to other ether + Br reactions, it was found that the tetrahydropyran + Br reaction proceeds in an overall endothermic addition-elimination mechanism via a number of intermediates. However, the reactivity of various ethers with atomic bromine was found to vary substantially. In contrast with the 1,4-dioxane + Br reaction, the chair form of the addition complex (c-C5H10O-Br) for THP + Br does not need to undergo ring inversion to form a boat conformer (b-C4H8O2-Br) before the intramolecular H-shift can occur to eventually release HBr. Instead, a direct, yet more favorable route was mapped out on the potential energy surface of the THP + Br reaction. The rate coefficients for all relevant steps involved in the reaction mechanism were computed using the energetics of coupled cluster calculations. On the basis of the results of the CCSD(T)/CBS//B3LYP/cc-pVTZ level of theory, the calculated overall rate coefficients can be expressed as kov.,calc.(T) = 4.60 × 10

  17. Development of Zinc/Bromine Batteries for Load-Leveling Applications: Phase 1 Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Eidler, Phillip

    1999-07-01

    The Zinc/Bromine Load-Leveling Battery Development contract (No. 40-8965) was partitioned at the outset into two phases of equal length. Phase 1 started in September 1990 and continued through December 1991. In Phase 1, zinc/bromine battery technology was to be advanced to the point that it would be clear that the technology was viable and would be an appropriate choice for electric utilities wishing to establish stationary energy-storage facilities. Criteria were established that addressed most of the concerns that had been observed in the previous development efforts. The performances of 8-cell and 100-cell laboratory batteries demonstrated that the criteria were met or exceeded. In Phase 2, 100-kWh batteries will be built and demonstrated, and a conceptual design for a load-leveling plant will be presented. At the same time, work will continue to identify improved assembly techniques and operating conditions. This report details the results of the efforts carried out in Phase 1. The highlights are: (1) Four 1-kWh stacks achieved over 100 cycles, One l-kWh stack achieved over 200 cycles, One 1-kWh stack achieved over 300 cycles; (2) Less than 10% degradation in performance occurred in the four stacks that achieved over 100 cycles; (3) The battery used for the zinc loading investigation exhibited virtually no loss in performance for loadings up to 130 mAh/cm{sup 2}; (4) Charge-current densities of 50 ma/cm{sup 2} have been achieved in minicells; (5) Fourteen consecutive no-strip cycles have been conducted on the stack with 300+ cycles; (6) A mass and energy balance spreadsheet that describes battery operation was completed; (7) Materials research has continued to provide improvements in the electrode, activation layer, and separator; and (8) A battery made of two 50-cell stacks (15 kWh) was produced and delivered to Sandia National Laboratories (SNL) for testing. The most critical development was the ability to assemble a battery stack that remained leak free. The

  18. Modelling the impact of chlorine and bromine emissions from large Plinian eruptions on ozone

    Science.gov (United States)

    Brenna, Hans; Krüger, Kirstin; Kutterolf, Steffen

    2016-04-01

    Large Plinian volcanic eruptions inject large amounts of atmosphere-relevant gases (e.g. S, Cl, Br) and materials into the stratosphere. If the eruption occurs in the tropics, it can have a global impact due to the dispersal through the large scale meridional overturning circulation. Most climate model studies concentrate on the sulfate aerosol effects on climate. In contrast, ozone-depletion initiated by volcanic halogens from tropical eruptions was believed to play an insignificant role for the global atmosphere, based on observations from the recent El Chichon and Pinatubo eruptions. New results regarding the halogen release by Plinian eruptions, as well as recent volcanic plume observations and model simulations facilitate now our investigation into what effect the combined chlorine and bromine emissions from large tropical eruptions have on ozone and the atmosphere in general. A complete halogen data set for the last 200 ka (Kutterolf et al., 2015), derived by the petrological method from paleo-eruptions of the Central American Volcanic Arc (CAVA), are used to force simulations with the advanced chemistry climate model WACCM (Whole Atmosphere Community Climate Model). The goal is to quantify the impact of volcanic halogens on the preindustrial atmosphere when the background chlorine levels were low compared to the present day with the main focus on stratospheric ozone. We carried out 5 model simulations assuming that 10% of the Cl and Br (9.51e+6 kg Br and 2.93e+9 kg Cl) emitted from the average CAVA eruption is injected into the tropical stratosphere during January. The model response reveals a global impact on the ozone layer affecting via radiation also atmospheric dynamics for more than 5 years. Given the current decline in anthropogenic chlorine, the results will become relevant for future halogen-rich explosive eruptions in the tropics. References: Kutterolf, S., T. Hansteen, A. Freundt, H. Wehrmann, K. Appel, K. Krüger, and W. Pérez (2015), Bromine

  19. Brominated flame retardants in the Arctic. An overview of spatial and temporal trends

    Energy Technology Data Exchange (ETDEWEB)

    Wit, C. de [Institute of Applied Environmental Research, Stockholm (Sweden); Alaee, M.; Muir, D. [National Water Research Institute, Burlington, MA (United States)

    2004-09-15

    The Stockholm Convention on Persistent Organic Pollutants (POPs), which entered into force on May 17, 2004, includes wording that chemicals with the characteristics of POPs are those found in locations ''distant from sources'' and those for which ''monitoring data showing that long-range environmental transport of the chemical may have occurred''. Thus, the Arctic has become an important indicator region for assessment of persistence and bioaccumulation. The Arctic environment is well suited as a region in which to evaluate POPs. Some regions of thee Arctic, particularly the Barents Sea area north of Norway and western Russia are relatively close to source regions of POPs. Cold conditions favor persistence of POPs relative to temperate or tropical environments. The presence of fourth level carnivores (e.g. polar bears and seabirds), and storage of lipid as an energy source, make Arctic food webs vulnerable to bioaccumulative chemicals. Indigenous people in the Arctic utilizing a traditional diet, which is high in nutritionally beneficial fat, results in their elevated exposure to some POPs. The first indication that brominated flame retardants (BFRs) were reaching the Arctic was the detection by Jansson et al. of lower molecular weight polybrominated diphenyl ethers (PBDEs) in Svalbard Brunnichfs guillemots (130 ng/g lipid weight) and ringed seals (40 ng/g lw) collected in 1981. Whitefish collected from Lake Storvindeln in 1986, a pristine mountain lake in the Swedish mountains near Ammarnas, had {sigma}PBDE levels of 26 ng/g lw. Despite these early findings, only recently have the spatial and temporal trends of BFRs been studied in detail in the Arctic. The purpose of this paper is to review the new data on BFRs in the Arctic and assess whether this information supports the view that PBDEs and other BFRs of similar molecular weight are POPs and potential global pollutants. This review is based on a recent assessment of POPs

  20. Temperature dependence of bromine activation due to reaction with ozone in a proxy for organic aerosols

    Science.gov (United States)

    Edebeli, Jacinta; Ammann, Markus; Gilgen, Anina; Eichler, Anja; Schneebeli, Martin; Bartels-Rausch, Thorsten

    2016-04-01

    The discovery of boundary layer ozone depletion events in the Polar Regions [1] and in the mid-latitudes [2], two areas of very different temperature regimes, begs the question of temperature dependence of reactions responsible for these observations [3]. These ODEs have been attributed to ozone reacting with halides leading to reactive halogens (halogen activation) of which bromide is extensively studied, R1 - R3 [4, 5] (R1 is a multiphase reaction). O3 + Br‑→ O2 + OBr‑ (R1) OBr‑ + H+ ↔ HOBr (R2) HOBr + H+ + Br‑→ Br2 + H2O (R3) Despite extensive studies of ozone-bromide interactions, the temperature dependence of bromine activation is not clear [3]. This limits parameterization of the involved reactions and factors in atmospheric models [3, 6]. Viscosity changes in the matrix (such as organic aerosols) due to temperature have been shown to influence heterogeneous reaction rates and products beyond pure temperature effect [7]. With the application of coated wall flow-tubes, the aim of this study is therefore to investigate the temperature dependence of bromine activation by ozone interaction while attempting to characterize the contributions of the bulk and surface reactions to observed ozone uptake. Citric acid is used in this study as a hygroscopically characterized matrix whose viscosity changes with temperature and humidity. Here, we present reactive ozone uptake measured between 258 and 289 K. The data show high reproducibility. Comparison of measured uptake with modelled bulk uptake at different matrix compositions (and viscosities) indicate that bulk reactive uptake dominates, but there are other factors which still need further consideration in the model. References 1. Barrie, L.A., et al., Nature, 1988. 334: p. 138 - 141. 2. Hebestreit, K., et al., Science, 1999. 283: p. 55-57. 3. Simpson, W.R., et al., Atmospheric Chemistry and Physics, 2007. 7: p. 4375 - 4418. 4. Haag, R.W. and J. Hoigné, Environ Sci Technol, 1983. 17: p. 261-267. 5. Oum

  1. Bromine monoxide/sulphur dioxide ratios in relation to volcanological observations at Mt. Etna 2006–2009

    Directory of Open Access Journals (Sweden)

    N. Bobrowski

    2012-03-01

    Full Text Available Over a three year period, from 2006 to 2009, frequent scattered sun light DOAS measurements were conducted at Mt. Etna in a distance of around six kilometres downwind from the summit craters. During the same period and in addition to these measurements, volcanic observations were made by regularly visiting various parts of Mt. Etna.

    Results from these measurements and observations are presented and their relation is discussed. The focus of the investigation is the bromine monoxide/sulphur dioxide (BrO/SO2 ratio, and its variability in relation to volcanic processes.

    That the halogen/sulphur ratio can serve as a precursor or indicator for the onset of eruptive activity was already proposed by earlier works (e.g. Noguchi and Kamiya, 1963; Menyailov, 1975; Pennisi and Cloarec, 1998; Aiuppa, 2002. However, there is still a limited understanding today because of the complexity with which halogens are released, depending on magma composition and degassing conditions. Our understanding of these processes is far from complete, for example of the rate and mechanism of bubble nucleation, growth and ascent in silicate melts (Carroll and Holloway, 1994, the halogen vapour-melt partitioning and the volatile diffusivity in the melt (Aiuppa et al., 2009.

    With this study we aim to add one more piece to the puzzle of what halogen/sulphur ratios might tell about volcanic activities. Our data set shows an increase of the BrO/SO2 ratio several weeks prior to an eruption, followed by a decline before and during the initial phase of eruptive activities. Towards the end of activity or short afterwards, the ratio increases to baseline values again and remains more or less constant during quiet phases. To explain the observed evolution of the BrO/SO2 ratio, a first empirical model is proposed. This model suggests that bromine, unlike chlorine and fluorine, is less soluble in the magmatic melt than sulphur

  2. Brominated flame retardants in Chinese air before and after the phase out of polybrominated diphenyl ethers

    Science.gov (United States)

    Li, Wen-Long; Qi, Hong; Ma, Wan-Li; Liu, Li-Yan; Zhang, Zhi; Mohammed, Mohammed O. A.; Song, Wei-Wei; Zhang, Zifeng; Li, Yi-Fan

    2015-09-01

    Brominated flame retardants (BFRs), including polybrominated diphenyl ethers (PBDEs) and novel non-BDE flame retardants (NBFRs), were analyzed in Chinese air during China's POPs Soil and Air Monitoring Program Phase I (SAMP-I) and Phase II (SAMP-II). The levels of Σ12PBDEs and Σ6NBFRs in urban sites were significantly higher than those in rural sites and background sites. The higher detection rate and concentrations of high molecular weight PBDEs and NBFRs in Phase II indicated the changing of the commercial pattern of BFRs after the phase out of PBDEs in China. Temperature was the major factor affecting the seasonal variations of molecular weight BFRs in atmosphere. A significant correlation between BFRs concentration and gross domestic product (GDP) was observed, with the GDP parameter explained 59.4% and 72.7% of the total variability for Octa-BDEs and low molecular weight NBFRs, respectively. Our findings indicated an evolving commercial usage of BFRs from SAMP-I to SAMP-II, i.e. shifting from lower molecular weight to higher molecular weight congeners in China.

  3. Formation of brominated trihalomethanes in chlorinated drinking-water from Lake Constance

    International Nuclear Information System (INIS)

    The formation of trihalomethanes (THMs) in raw water and drinking water from Lake Constance containing low amounts of DOC and bromide was studied with special emphasis on brominated trihalomethanes (Br-THMs). If the raw water was ozonated prior to chlorination, the formation of THMs was reduced by 37%, and if a rapid sandfiltration was interposed, the THM-formation was again slightly enhanced. The percentage of Br-THMs on total-THMs increased from 16% to 35% during the treatment process. In the drinking water distribution system of BWV the formation of Br-THMs and CHCl3 was studied with respect to residence time and post-chlorination. Unless the post-chlorination was performed, the THM-formation in the distribution system resembled that obtained from laboratory studies, except for small amounts of THMs being purged due to transport in the mains and residence in the reservoirs. Post-chlorination increased CHCl3- and the CHBrCl2-formation, but there was no effect on the formation of CHBr2Cl and CHBr3. However, the total THM-concentration in the drinking water never exceeded the German drinking water standard of 10 μg/L. (orig.)

  4. From Clothing to Laundry Water: Investigating the Fate of Phthalates, Brominated Flame Retardants, and Organophosphate Esters.

    Science.gov (United States)

    Saini, Amandeep; Thaysen, Clara; Jantunen, Liisa; McQueen, Rachel H; Diamond, Miriam L

    2016-09-01

    The accumulation of phthalate esters, brominated flame retardants (BFRs) and organophosphate esters (OPEs) by clothing from indoor air and transfer via laundering to outdoors were investigated. Over 30 days cotton and polyester fabrics accumulated 3475 and 1950 ng/dm(2) ∑5phthalates, 65 and 78 ng/dm(2) ∑10BFRs, and 1200 and 310 ng/dm(2) ∑8OPEs, respectively. Planar surface area concentrations of OPEs and low molecular weight phthalates were significantly greater in cotton than polyester and similar for BFRs and high molecular weight phthalates. This difference was significantly and inversely correlated with KOW, suggesting greater sorption of polar compounds to polar cotton. Chemical release from cotton and polyester to laundry water was >80% of aliphatic OPEs (log KOW 8) and BFRs (log KOW > 6). These results support the hypothesis that clothing acts an efficient conveyer of soluble semivolatile organic compounds (SVOCs) from indoors to outdoors through accumulation from air and then release during laundering. Clothes drying could as well contribute to the release of chemicals emitted by electric dryers. The results also have implications for dermal exposure. PMID:27507188

  5. [Optimization of determination of aflatoxins in foods with bromine postcolumn derivatization].

    Science.gov (United States)

    Czerwiecki, Ludwik; Wilczyńska, Grazyna

    2007-01-01

    The method for determination of aflatoxin B1, B2, G1 i G2 in nuts, culinary spices, cereals and cereal products was described. To optimize the analytical procedure in several products, condition of proper extraction, clean-up, HPLC and detection were selected. After extraction by means of methanol and water (80+20 v/v) or (70+30 v/v), clean-up on IAC columns, HPLC on C18 columns--Nucleosil and Nova Pak with mobile phase-methanol, acetonitrile, water (20+20+60 v/v) was performed. For fluorometric detection at 362/430 nm, post-column derivatization of aflatoxin B1 and G1 with bromine was carried out. The mean recovery of the method depending on matrix and aflatoxin, was 52-102% at RSD% 0.2-8.3. LOD and LOQ, respectively were: 0.01 and 0.02 microg/kg for nuts and 0.05 and 0.1 microg/kg for culinary spices and cereal products. The concentrations of aflatoxins in 86 samples of foods from market were below the permissible maximum levels legally binding. PMID:18246653

  6. Natural Oxidation of Bromide to Bromine in Evaporated Dead Sea Brines

    Science.gov (United States)

    Gavrieli, Ittai; Golan, Rotem; Lazar, Boaz; Baer, Gidi; Zakon, Yevgeni; Ganor, Jiwchar

    2016-04-01

    Highly evaporated Dead Sea brines are found in isolated sinkholes along the Dead Sea. Many of these brines reach densities of over 1.3 kg/L and pHacidic with a value of ~6.3. In comparison, seawater with the same alkalinity would have a pH value well above 8.3, meaning that H+ activity is 100 fold lower than that of Dead Sea brine. In the present work we assess the apparent dissociation constant value of boric acid (K`B) for the Dead Sea brine and use it to explain the brine's low pH value. We then show that pH decreases further as the brine evaporates and salinity increases. Finally we explain the reddish hue of the hypersaline brines in the sinkholes as due to the presence of dissolved bromine. The latter is the product of oxidation of dissolved bromide, a process that is enabled by the low pH of the hypersaline brines and their high bromide concentration.

  7. Brominated diphenyl ether levels. A comparison of tributary sediments versus biosolid material

    Energy Technology Data Exchange (ETDEWEB)

    Kolic, T.M.; MacPherson, K.A.; Reiner, E.J. [Ontario Ministry of the Environment, Laboratory Services Branch, Toronto, ON (Canada); Ho, T.; Kleywegt, S. [Ontario Ministry of the Environment, Standards Development Branch, Toronto, ON (Canada); Dove, A.; Marvin, C. [Environment Canada, Burlington, ON (Canada)

    2004-09-15

    PBDEs are persistent in the environment, have low water solubility and are known to have a tendency to bioaccumulate in wildlife and humans. There are 209 possible PBDE congeners. There has been concern over the bioaccumulation of these compounds since they have been found in mother's milk. Some of the brominated diphenyl ethers are known to metabolize into hydroxylated compounds and these metabolites are known to compete with and reduce thyroxine (T4) from binding to the thyroxine binding protein, transthyretin. This disrupts the thyroid hormone system interaction that has recently been notable amongst women in the form of hypothyroidism that can affect the fetus development in the form of neurodevelopmental deficits. There have been reports of estrogenic activities regarding PBDEs and their hydroxylated counterparts. Information such as this is indicative that PBDEs are endocrine disruptors. Due to their lipophilic nature, PBDEs have a high binding affinity to particulates and accumulate in sediments. Various reports on sediments and sludge type matrices have been reported in Austria, Switzerland, Netherlands and Canada. The following paper is a presentation of levels of PBDEs found in Tributary sediments and their comparison of levels to nearby biosolid sampling locations along Lake Ontario.

  8. In vitro screening of the endocrine disrupting potency of brominated flame retardants and their metabolites

    Energy Technology Data Exchange (ETDEWEB)

    Hamers, T.; Kamstra, J.H. [Inst. for Environmental Studies (IVM), Amsterdam (Netherlands); Sonneveld, E. [BioDetection Systems (BDS), Amsterdam (Netherlands); Murk, A.J. [Wageningen Univ., Toxicology Group, Wageningen (Netherlands); Zegers, B.N.; Boon, J.P. [Royal Netherlands Inst. for Sea Research (NIOZ), Den Burg (Netherlands); Brouwer, A. [Umea Univ., Umea (Sweden)

    2004-09-15

    Substantial evidence is recently becoming available that brominated flame retardants (BFRs) are potential endocrine disruptors. The toxicological profile of BFRs, however, is too incomplete and insufficient to perform human and ecological risk assessment. To fill these gaps, the EU funded research program FIRE was started in December 2002. This program aims at the identification and toxicological characterization of the most potent and environmentally relevant BFRs and their possible risk for human and wildlife health. As part of a hazard identification approach, twenty seven BFRs have been selected within the framework of FIRE for pre-screening their endocrinedisrupting potencies. Selection of test compounds was based on a maximal variation in physicochemical characteristics of BFRs within the test set, allowing the establishment of quantitative structure-activity relationships (QSARs). In addition, environmental relevance (e.g. high production volumes and persistence) and availability for testing were used as selection criteria. BFRs were tested in seven different in vitro bioassays for their potency to interfere via estrogenic, thyroidal, androgenic, progestagenic, and Ah-receptor mediated pathways. Metabolisation rates of BFRs were determined using phenobarbital-induced rat liver microsomes. Finally, the endocrine disrupting potency of the metabolites was determined in the same in vitro bio-assays and compared to the potency of the parent compounds.

  9. Product oriented oxidative bromination of methane over Rh/SiO2 catalysts

    Institute of Scientific and Technical Information of China (English)

    Zhen Liu; Wensheng Li; Xiaoping Zhou

    2010-01-01

    Rh/SiO2 was prepared for the oxidative bromination of methane.The catalyst was prepared by calcination at different temperatures and for different times to obtain catalysts with different specific surface areas for the purposes of producing either CH3Br or CH3Br and CO.It was found that the catalyst having a low specific surface area(calcined at relatively high temperature)favors the selective oxidation of methane to prepare CH3Br,while the catalyst having a high specific surface area favors the deeper partial oxidation of methane,which is good for CH3Br and CO preparation.The 650 h on stream life-time test revealed that the catalytic performance of the 0.4Rh/SiO2-900-10 catalyst was excellent.Both methane conversion and CH3Br selectivity kept increasing trends during the life-time test.No matter how serious was the Rh leaching during the reaction,the 0.4Rh/SiO2-900-10 catalyst did not deactivate at all.

  10. Brominated flame retardants in the indoor environment - Comparative study of indoor contamination from three countries.

    Science.gov (United States)

    Venier, Marta; Audy, Ondřej; Vojta, Šimon; Bečanová, Jitka; Romanak, Kevin; Melymuk, Lisa; Krátká, Martina; Kukučka, Petr; Okeme, Joseph; Saini, Amandeep; Diamond, Miriam L; Klánová, Jana

    2016-09-01

    Concentrations of more than 20 brominated flame retardants (FRs), including polybrominated diphenyl ethers (PBDEs) and emerging FRs, were measured in air, dust and window wipes from 63 homes in Canada, the Czech Republic and the United States in the spring and summer of 2013. Among the PBDEs, the highest concentrations were generally BDE-209 in all three matrices, followed by Penta-BDEs. Among alternative FRs, EHTBB and BEHTBP were detected at the highest concentrations. DBDPE was also a major alternative FR detected in dust and air. Bromobenzenes were detected at lower levels than PBDEs and other alternative FRs; among the bromobenzenes, HBB and PBEB were the most abundant compounds. In general, FR levels were highest in the US and lowest in the Czech Republic - a geographic trend that reflects the flame retardants' market. No statistically significant differences were detected between bedroom and living room FR concentrations in the same house (n=10), suggesting that sources of FRs are widespread indoors and mixing between rooms. The concentrations of FRs in air, dust, and window film were significantly correlated, especially for PBDEs. We found a significant relationship between the concentrations in dust and window film and in the gas phase for FRs with log KOA values values >14. This hypothesis was confirmed by a large discrepancy between values predicted using a partitioning model and the measured values for FRs with log KOA values >14. PMID:27248661

  11. From Clothing to Laundry Water: Investigating the Fate of Phthalates, Brominated Flame Retardants, and Organophosphate Esters.

    Science.gov (United States)

    Saini, Amandeep; Thaysen, Clara; Jantunen, Liisa; McQueen, Rachel H; Diamond, Miriam L

    2016-09-01

    The accumulation of phthalate esters, brominated flame retardants (BFRs) and organophosphate esters (OPEs) by clothing from indoor air and transfer via laundering to outdoors were investigated. Over 30 days cotton and polyester fabrics accumulated 3475 and 1950 ng/dm(2) ∑5phthalates, 65 and 78 ng/dm(2) ∑10BFRs, and 1200 and 310 ng/dm(2) ∑8OPEs, respectively. Planar surface area concentrations of OPEs and low molecular weight phthalates were significantly greater in cotton than polyester and similar for BFRs and high molecular weight phthalates. This difference was significantly and inversely correlated with KOW, suggesting greater sorption of polar compounds to polar cotton. Chemical release from cotton and polyester to laundry water was >80% of aliphatic OPEs (log KOW phthalates (log KOW 4-6), and phthalates (log KOW > 8) and BFRs (log KOW > 6). These results support the hypothesis that clothing acts an efficient conveyer of soluble semivolatile organic compounds (SVOCs) from indoors to outdoors through accumulation from air and then release during laundering. Clothes drying could as well contribute to the release of chemicals emitted by electric dryers. The results also have implications for dermal exposure.

  12. A study of the presence of brominated flame retardants in Australian fauna

    Energy Technology Data Exchange (ETDEWEB)

    Symons, R.; Burniston, D.; Piro, N.; Stevenson, G.; Yates, A. [Australian Government Analytical Laboratories, Sydney (Australia)

    2004-09-15

    Brominated flame retardants, in particular polybrominated diphenyl ethers (PBDEs) gained prominence in the late nineties when Noren et al. reported an exponential increase in PBDE levels found in Swedish mothers milk over a quarter of a century period with an associated decrease in levels of dioxin-like compounds. PBDEs have since become exceptionally widely studied being detected in most environmental compartments and food as well as human tissues. Only limited information on the distribution if PBDEs is available for the Southern Hemisphere, however, elevated levels of PBDEs in pork fat were detected during the routine screening for organochlorine pesticide residues. More recently an investigation of breast milk for PBDE levels also demonstrated that levels were comparable with those in the Northern Hemisphere. BFRs are not manufactured in Australia but it has been estimated that over 500 tonnes are imported yearly of which 340 tonnes are PBDEs. In addition, the amount of PBDEs that are contained in imported articles used both in domestic and industrial applications is unknown. In this paper, we report levels of PBDEs in a range of different Australian fauna that show that these POPs have indeed become widely distributed both in terms of the types of the fauna but also the levels determined.

  13. Characterizing Variability in the Spatial Distribution of Bromine Explosion Events in the Vicinity of Barrow, Alaska

    Science.gov (United States)

    Peterson, P.; Pratt, K.; Simpson, W. R.; Shepson, P. B.; Pöhler, D.; Friess, U.; Zielcke, J.; Platt, U.; Nghiem, S. V.; Sihler, H.

    2015-12-01

    Reactive halogens (e.g. Br, BrO) are produced photochemically during springtime in the Arctic. Some dramatic effects of these halogen species are known (e.g. ozone depletion, mercury deposition), but changes in atmospheric composition related to this halogen chemistry, particularly those related to increasing sea ice loss and the transformation of Arctic sea ice cover, are unknown. In March 2012, the Bromine, Ozone, Mercury EXperiment (BROMEX) provided an opportunity to enhance our understanding of the spatial and temporal variability of halogen chemistry in the vicinity of Barrow, Alaska. During BROMEX, we used Multiple Axis Differential Optical Absorption Spectroscopy (MAX-DOAS) to measure BrO lower tropospheric vertical column densities (LT-VCD) and near-surface mixing ratios at Barrow, as well as on land-fast ice 40 km north east of Barrow, and a drifting platform on seasonal sea ice west of Barrow. Concurrently, an aircraft equipped with the Heidelberg Airborne Imaging DOAS Instrument (HAIDI) collected airborne BrO data at altitudes up to 3 km. These measurements showed several instances of spatial gradients in BrO between measurement sites, as well as times when BrO was present up to 1km aloft. We explore explanations for these features using local and synoptic meteorology, back-trajectory modelling, MODIS and airborne imagery, as well as satellite-instrument-based maps of synoptic sea ice classes and tropospheric BrO.

  14. Photochemical transformation of five novel brominated flame retardants: Kinetics and photoproducts.

    Science.gov (United States)

    Zhang, Ya-Nan; Chen, Jingwen; Xie, Qing; Li, Yingjie; Zhou, Chengzhi

    2016-05-01

    Many novel brominated flame retardants (NBFRs) are used as substitutes of polybrominated diphenyl ethers (PBDEs) in recent years. However, little is known about their phototransformation behavior, which may influence the environmental fate of these chemicals. In this study, photochemical behavior of five NBFRs, allyl-2,4,6-tribromophenyl ether (ATE), 2-bromoallyl-2,4,6-tribromophenyl ether (BATE), 2,3-dibromopropyl-2,4,6-tribromophenyl ether (DPTE), 1,2-bis(2,4,6-tribromophenoxy)ethane (BTBPE), and 2,4,6-tris(2,4,6-tribromophenoxy)-1,3,5-triazine (TTBP-TAZ) was investigated. Results show all the five NBFRs can undergo photochemical transformation under simulated sunlight irradiation. Quantum yields (Φ) of the five NBFRs varied from 0.012 of TTBP-TAZ in hexane to 0.091 of BTBPE in methanol. Half-lives (t1/2) relevant with solar irradiation of these NBFRs were estimated using the determined Φ, and the values are 1.5-12.0 d in summer and 17.1-165.0 d in winter. Debrominated and ether bond cleavage products were identified in the phototransformation of DPTE and BTBPE. Debromination on the phenyl is a main phototransformation pathway for DPTE, and both debromination and ether bond cleavage are main phototransformation pathways for BTBPE. This study is helpful to better understand the phototransformation behavior of the NBFRs. PMID:26796587

  15. Shuttle Environmental Assurance: Brominated Flame Retardants - Concerns, Drivers, Potential Impacts and Mitigation Strategies

    Science.gov (United States)

    Clark-Ingram, Marceia

    2010-01-01

    Brominated Flame Retardants (BFRs) are widely used in the manufacture of electrical and electronic components and as additives in formulations for foams, plastics and rubbers. The United States (US) and the European Union (EU)have increased regulation and monitoring of of targeted BFRs, such as Polybrominated Diphenyl Ethers (PBDEs) due to the bioaccumulative effects in humans and animals. In response, manufacturers and vendors of BFR-containing materials are changing flame-retardant additives, sometimes without notifying BFR users. In some instances, Deca-bromodiphenylether (Deca-BDE) and other families of flame retardants are being used as replacement flame retardants for penta-BDE and octa-BDE. The reformulation of the BFR-containing material typically results in the removal of the targeted PBDE and replacement with a non-PBDE chemical or non-targeted PBDE. Many users of PBDE -based materials are concerned that vendors will perform reformulation and not inform the end user. Materials performance such as flammability, adhesion , and tensile strength may be altered due to reformulation. The requalification of newly formulated materials may be required, or replacement materials may have to be identified and qualified. The Shuttle Enviornmental Assurance (SEA) team indentified a risk to the Space Shuttle Program associated with the possibility that targeted PBDEs may be replaced without notification. Resultant decreases in flame retardancy, Liquid Oxygen (LOX) compatibility, or material performance could have serious consequences.

  16. Identification of highly brominated analogues of Q1 in marine mammals

    International Nuclear Information System (INIS)

    Three novel halogenated organic compounds (HOCs) have been identified in the blubber of marine mammals from coastal New England with the molecular formulae C9H3N2Br6Cl, C9H3N2Br7, and C9H4N2Br5Cl. They were identified using high and low resolution gas chromatography mass spectrometry (GCMS) and appear to be highly brominated analogues of Q1, a heptachlorinated HOC suspected to be naturally produced. These compounds were found in Atlantic white sided dolphin (Lagenorhynchus acutus), bottlenose dolphin (Tursiops truncatus), common dolphin (Delphinus delphis), Risso's dolphin (Grampus griseus), harbor porpoise (Phocoena phocoena), beluga whale (Delphinapterus leucas), fin whale (Balaenoptera physalus), grey seal (Halichoerus grypus), harp seal (Phoca groenlandica) and a potential food source (Loligo pealei) with concentrations as high as 2.7 μg/g (lipid weight). The regiospecificity of C9H3N2Br6Cl is suggestive of a biogenic origin. Debromination of C9H3N2Br6Cl may be significant in the formation of C9H4N2Br5Cl. - Three novel bioaccumulated compounds were identified as C9H3N2Br6Cl, C9H3N2Br7 and C9H4N2Br5Cl

  17. Brominated flame retardants (BFRs): A review on environmental contamination in China.

    Science.gov (United States)

    Yu, Gang; Bu, Qingwei; Cao, Zhiguo; Du, Xinming; Xia, Jing; Wu, Min; Huang, Jun

    2016-05-01

    Brominated flame retardants (BFRs) which were detected extensively in environmental and biota samples worldwide, have raised significant concerns during past decades for their persistence, bioaccumulation and potential toxicity to ecological environment and human health. In this paper, we have compiled and reviewed existing literature on the contamination status of BFRs in abiotic and biotic environments in China, including polybrominated diphenyl ethers (PBDEs), hexabromocyclododecane, tetrabromobisphenol A and new BFRs. Temporal trends were also summarized and evaluated. Based on this review, it has been concluded that (1) high concentrations of PBDEs were generally related to the e-waste disposal processing, while the spatial distribution pattern of other BFRs was not necessarily in accordance with this; (2) extremely high concentrations of BFRs in indoor dust emphasized the importance of indoor contamination to human body burdens, while more work need to be done to confirm its contribution; (3) PBDEs in electronics dismantling workers were higher compared to the general population, indicating the occupational exposure should be of particular concern; (4) more data are now becoming available for BFRs in aquatic and terrestrial organisms not previously studied, while studies that consider the occurrence of BFRs in organisms of different trophic levels are still of urgent need for evaluating the fate of BFRs in the food web; and (5) limited data showed a decreasing trend for PBDEs, while more data on time trends of BFR contamination in various matrices and locations are still needed before the impact of regulation of BFRs can be assessed.

  18. Ion Colliders

    CERN Document Server

    Fischer, W

    2014-01-01

    High-energy ion colliders are large research tools in nuclear physics to study the Quark-Gluon-Plasma (QGP). The range of collision energy and high luminosity are important design and operational considerations. The experiments also expect flexibility with frequent changes in the collision energy, detector fields, and ion species. Ion species range from protons, including polarized protons in RHIC, to heavy nuclei like gold, lead and uranium. Asymmetric collision combinations (e.g. protons against heavy ions) are also essential. For the creation, acceleration, and storage of bright intense ion beams, limits are set by space charge, charge change, and intrabeam scattering effects, as well as beam losses due to a variety of other phenomena. Currently, there are two operating ion colliders, the Relativistic Heavy Ion Collider (RHIC) at BNL, and the Large Hadron Collider (LHC) at CERN.

  19. The role of bromine and chlorine chemistry for arctic ozone depletion events in Ny-Ålesund and comparison with model calculations

    Directory of Open Access Journals (Sweden)

    M. Martinez

    Full Text Available During the Arctic Tropospheric Ozone Chemistry (ARCTOC campaigns at Ny-Ålesund, Spitsbergen, the role of halogens in the depletion of boundary layer ozone was investigated. In spring 1995 and 1996 up to 30 ppt bromine monoxide were found whenever ozone decreased from normal levels of about 40 ppb. Those main trace gases and others were specifically followed in the UV-VIS spectral region by differential optical absorption spectroscopy (DOAS along light paths running between 20 and 475 m a.s.l.. The daily variation of peroxy radicals closely followed the ozone photolysis rate J(O3(O1D in the absence of ozone depletion most of the time. However, during low ozone events this close correlation was no longer found because the measurement of radicals by chemical amplification (CA turned out to be sensitive to peroxy radicals and ClOx. Large CA signals at night can sometimes definitely be assigned to ClOx and reached up to 2 ppt. Total bromine and iodine were both stripped quantitatively from air by active charcoal traps and measured after neutron activation of the samples. Total bromine increased from background levels of about 15 ppt to a maximum of 90 ppt during an event of complete ozone depletion. For the spring season a strong source of bromine is identified in the pack ice region according to back trajectories. Though biogenic emission sources cannot be completely ruled out, a primary activation of halogenides by various oxidants seems to initiate an efficient autocatalytic process, mainly driven by ozone and light, on ice and perhaps on aerosols. Halogenides residing on pack ice surfaces are continuously oxidised by hypohalogenous acids releasing bromine and chlorine into the air. During transport and especially above open water this air mixes with upper layer pristine air. As large quantities of bromine, often in the form of BrO, have been observed at polar sunrise also around Antarctica, its release

  20. Ion colliders

    International Nuclear Information System (INIS)

    Ion colliders are research tools for high-energy nuclear physics, and are used to test the theory of Quantum Chromo Dynamics (QCD). The collisions of fully stripped high-energy ions create matter of a temperature and density that existed only microseconds after the Big Bang. Ion colliders can reach higher densities and temperatures than fixed target experiments although at a much lower luminosity. The first ion collider was the CERN Intersecting Storage Ring (ISR), which collided light ions (77Asb1, 81Bou1). The BNL Relativistic Heavy Ion Collider (RHIC) is in operation since 2000 and has collided a number of species at numerous energies. The CERN Large Hadron Collider (LHC) started the heavy ion program in 2010. Table 1 shows all previous and the currently planned running modes for ISR, RHIC, and LHC. All three machines also collide protons, which are spin-polarized in RHIC. Ion colliders differ from proton or antiproton colliders in a number of ways: the preparation of the ions in the source and the pre-injector chain is limited by other effects than for protons; frequent changes in the collision energy and particle species, including asymmetric species, are typical; and the interaction of ions with each other and accelerator components is different from protons, which has implications for collision products, collimation, the beam dump, and intercepting instrumentation devices such a profile monitors. In the preparation for the collider use the charge state Z of the ions is successively increased to minimize the effects of space charge, intrabeam scattering (IBS), charge change effects (electron capture and stripping), and ion-impact desorption after beam loss. Low charge states reduce space charge, intrabeam scattering, and electron capture effects. High charge states reduce electron stripping, and make bending and acceleration more effective. Electron stripping at higher energies is generally more efficient. Table 2 shows the charge states and energies in the

  1. Emissions of Bromine and Iodine from the Marine Environment in New Zealand

    Science.gov (United States)

    Martinez-Aviles, M.; Kreher, K.; Johnston, P. V.; Hay, T.; Thomas, A.; Schofield, R.

    2009-12-01

    of determining coastal sites where high active halogen release could be observed. The selected sites had high biomass concentration of marine algae that would be exposed by low tides. Local macro algae type, tidal height, sunlight, temperature, and wind speed were recorded and correlated to the resulting data in order to better understand the environmental factors that modulate the emissions of halogen oxides from the marine environment to the troposphere. Results of this multi-disciplinary approach to studying brominated VSLS and their atmospheric implications are presented. As well, the chemical processes taking place and producing these halogen oxides are discussed in a thorough manner. This study contributes to a better understanding of the origin of bromine and iodine in the lowermost atmosphere (i.e. marine boundary layer). Particularly, the role that natural emissions of halogenated VSLS from the ocean may play in the halogen budget of the lower atmosphere is addressed by quantitatively understanding key links in this chain so that its potential future impacts on atmospheric chemistry, surface UV radiation, and the biosphere can be thoroughly assessed.

  2. Bromination vis-a-vis chlorination as a biocide feasibility study

    International Nuclear Information System (INIS)

    friendly. This paper highlights the brief details on the feasibility studies carried out on bromination. (author)

  3. Fabric phase sorptive extraction: Two practical sample pretreatment techniques for brominated flame retardants in water.

    Science.gov (United States)

    Huang, Guiqi; Dong, Sheying; Zhang, Mengfei; Zhang, Haihan; Huang, Tinglin

    2016-09-15

    Sample pretreatment is the critical section for residue monitoring of hazardous pollutants. In this paper, using the cellulose fabric as host matrix, three extraction sorbents such as poly (tetrahydrofuran) (PTHF), poly (ethylene glycol) (PEG) and poly (dimethyldiphenylsiloxane) (PDMDPS), were prepared on the surface of the cellulose fabric. Two practical extraction techniques including stir bar fabric phase sorptive extraction (stir bar-FPSE) and magnetic stir fabric phase sorptive extraction (magnetic stir-FPSE) have been designed, which allow stirring of fabric phase sorbent during the whole extraction process. In the meantime, three brominated flame retardants (BFRs) [tetrabromobisphenol A (TBBPA), tetrabromobisphenol A bisallylether (TBBPA-BAE), tetrabromobisphenol A bis(2,3-dibromopropyl)ether (TBBPA-BDBPE)] in the water sample were selected as model analytes for the practical evaluation of the proposed two techniques using high-performance liquid chromatography (HPLC). Moreover, various experimental conditions affecting extraction process such as the type of fabric phase, extraction time, the amount of salt and elution conditions were also investigated. Due to the large sorbent loading capacity and unique stirring performance, both techniques possessed high extraction capability and fast extraction equilibrium. Under the optimized conditions, high recoveries (90-99%) and low limits of detection (LODs) (0.01-0.05 μg L(-1)) were achieved. In addition, the reproducibility was obtained by evaluating the intraday and interday precisions with relative standard deviations (RSDs) less than 5.1% and 6.8%, respectively. The results indicated that two pretreatment techniques were promising and practical for monitoring of hazardous pollutants in the water sample. Due to low solvent consumption and high repeated use performance, proposed techniques also could meet green analytical criteria. PMID:27300591

  4. Evaluation of Common Use Brominated Flame Retardant (BFR Toxicity Using a Zebrafish Embryo Model

    Directory of Open Access Journals (Sweden)

    Crystal Y. Usenko

    2016-09-01

    Full Text Available Brominated flame retardants (BFRs are used to reduce the flammability of plastics, textiles, and electronics. BFRs vary in their chemical properties and structures, and it is expected that these differences alter their biological interactions and toxicity. Zebrafish were used as the model organism for assessing the toxicity of nine structurally-diverse BFRs. In addition to monitoring for overt toxicity, the rate of spontaneous movement, and acetylcholinesterase and glutathione-S-transferase (GST activities were assessed following exposure. The toxicities of BFRs tested can be ranked by LC50 as tetrabromobisphenol A (TBBPA < 4,4′-isopropylidenebis[2-(2,6-dibromophenoxylethanol] (TBBPA-OHEE < Pentabromochlorocyclohexane (PBCH < 2-ethylhexyl 2,3,4,5-tetrabromobenzoate (TBB < hexabromocyclododecane (HBCD < hexabromobenzene (HBB < Tetrabromophthalic anhydride (PHT4. No adverse effect was observed in di(2-ethylhexyl tetrabromophthalate (TBPH or dibromoneopentyl glycol (DBNPG-treated embryos. The rate of spontaneous movement was decreased in a concentration-dependent manner following exposure to four of the nine compounds. GST activity was elevated following treatment with PBCH, TBBPA, HBCD, and HBB. The results indicate that exposure to several BFRs may activate an antioxidant response and alter behavior during early development. Some of the BFRs, such as TBBPA and TBBPA-OHEE, induced adverse effects at concentrations lower than chemicals that are currently banned. These results suggest that zebrafish are sensitive to exposure to BFRs and can be used as a comparative screening model, as well as to determine alterations in behavior following exposure and probe mechanisms of action.

  5. Leaching characteristics of heavy metals and brominated flame retardants from waste printed circuit boards

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Xiaoyu [State Environmental Protection Key Laboratory of Environmental Risk Assessment and Control on Chemical Process, East China University of Science and Technology, Shanghai 200237 (China); Guo, Jie, E-mail: guojie@ecust.edu.cn [State Environmental Protection Key Laboratory of Environmental Risk Assessment and Control on Chemical Process, East China University of Science and Technology, Shanghai 200237 (China); Lin, Kuangfei [State Environmental Protection Key Laboratory of Environmental Risk Assessment and Control on Chemical Process, East China University of Science and Technology, Shanghai 200237 (China); Shanghai Key Laboratory of Functional Materials Chemistry, East China University of Science and Technology, Shanghai 200237 (China); Huang, Kai; Deng, Jingjing [State Environmental Protection Key Laboratory of Environmental Risk Assessment and Control on Chemical Process, East China University of Science and Technology, Shanghai 200237 (China)

    2013-02-15

    Highlights: ► Cu and Pb were the most leachable heavy metals in WPCBs according to TCLP and SPLP. ► Penta-BDE congeners were dominated in all extracts. ► High dissolved organic matter condition promoted the BFRs leaching rate. ► Leaching from WPCBs was a significant emission source of BFRs in landfill. -- Abstract: Leaching assessment on five heavy metals (copper, zinc, lead, nickel and cadmium) and two brominated flame retardants (BFRs), polybrominated diphenyl ethers (PBDEs) and tetrabromobisphenol A (TBBPA), from waste printed circuit boards (WPCBs) were conducted using various leaching methods. The mean leaching concentrations of copper were the highest in both toxicity characteristic leaching procedures (TCLP) and synthetic precipitation leaching procedures (SPLP) tests at 8.6 mg/L and 1.1 mg/L, while only lead (6.2 mg/L) exceeded the TCLP criteria and Chinese EPA regulatory limit (both 5.0 mg/L). However, PBDEs and TBBPA were not detected in TCLP and SPLP tests. Then the BFRs leaching trends and potential leachabilities were further investigated in actual landfill leachates using a modified method. Leaching characteristics that fast-leaching initially followed by slow-desorption over time were generally observed. In landfill leachate tests, the highest leaching concentrations of PBDEs and TBBPA were determined at 30.39 and 12.27 μg/L. Meanwhile, the highest leaching rates were estimated to reach 0.08% and 1.00%, respectively, which were significantly influenced by the dissolved organic carbon contents of extracts, the hydrophobicities of target BFRs and the specific surface areas of WPCBs materials. These results proved that leaching from WPCBs was a significant emission source of BFRs in landfill and electronic waste recycling dumpsite.

  6. Characterization of bromine-76-labelled 5-bromo-6-nitroquipazine for PET studies of the serotonin transporter

    Energy Technology Data Exchange (ETDEWEB)

    Lundkvist, Camilla E-mail: Lundkvis@shfj.cea.fr; Loc' h, Christian; Halldin, Christer; Bottlaender, Michel; Ottaviani, Michele; Coulon, Christine; Fuseau, Chantal; Mathis, Chester; Farde, Lars; Maziere, Bernard

    1999-07-01

    The development of suitable radioligands for brain imaging of the serotonin transporter is of great importance for the study of depression and other affective disorders. The potent and selective serotonin transporter ligand, 5-iodo-6-nitro-2-piperazinylquinoline, has been labelled with iodine-123 and used as a radioligand for single photon emission computerized tomography. To evaluate the potential of the bromine-76-labelled analogue, 5-bromo-6-nitroquipazine, as a radioligand for positron emission tomography (PET), its brain distribution and binding characteristics were examined in rats. In vivo brain distribution and ex vivo autoradiography demonstrated that [{sup 76}Br]5-bromo-6-nitroquipazine enters the brain rapidly. The regional brain distribution of [{sup 76}Br]5-bromo-6-nitroquipazine was consistent with the known distribution of serotonin transporters in the midbrain, pons, thalamus, striatum, and neocortex. Specific binding was inhibited by the selective serotonin reuptake inhibitor citalopram. The peripheral metabolism in plasma was rapid, but more than 90% of the radioactivity in brain represented unchanged radioligand 2 h postinjection (p.i.). A preliminary PET study was also performed in a baboon. Following the intravenous injection of [{sup 76}Br]5-bromo-6-nitroquipazine in a baboon, there was a conspicuous accumulation of radioactivity in thalamus, striatum, and pons. The radioactivity in these brain regions was 1.5 times higher than in the cerebellum at 3 h and 2.5-4 times higher at 24 h. A rapid metabolism of the radioligand in plasma was observed (38% unchanged after 5 min). The results indicate that [{sup 76}Br]5-bromo-6-nitroquipazine has potential for PET imaging of the serotonin transporter.

  7. Response of wheat and pea seedlings on increase of bromine concentration in the growth medium.

    Science.gov (United States)

    Shtangeeva, Irina; Niemelä, Matti; Perämäki, Paavo; Timofeev, Sergey

    2015-12-01

    Biogeochemical cycles of bromine (Br) and its quantitative requirements for different plant species are still studied poorly. There is a need to examine Br pathways in plants and evaluate the factors important for Br accumulation in a plant. In the present work, the effects of different Br compounds on an uptake of Br by two plant species (wheat and pea) that tolerate Br differently (pea is more sensitive to Br compared with wheat) have been studied. The growth medium was spiked with either KBr or NaBr at concentrations 0, 10, 50 and 100 mg/L. Elemental analysis of the plants was performed using inductively coupled plasma optical emission spectrometry (ICP-OES) and ICP-MS analytical techniques after leaching of the samples with tetramethyl ammonium hydroxide at mild temperature (60 °C). The experimental results have shown that wheat and pea seedlings can accumulate rather large amounts of Br. An increase of Br concentration in a plant was not always directly proportional to the variations in the Br concentration in the growth medium. In wheat, the greater part of Br was accumulated during first 7 days. In pea, the uptake of Br lasted until the end of the experiment. Certain differences in the ability of plants to accumulate Br were observed when the plants were grown in a medium spiked with different Br compounds. In most cases, Br accumulation was higher in the leaves of the plants grown in the medium spiked with KBr. The same tendency was observed for another halogen, chlorine (Cl).

  8. Leaching characteristics of heavy metals and brominated flame retardants from waste printed circuit boards

    International Nuclear Information System (INIS)

    Highlights: ► Cu and Pb were the most leachable heavy metals in WPCBs according to TCLP and SPLP. ► Penta-BDE congeners were dominated in all extracts. ► High dissolved organic matter condition promoted the BFRs leaching rate. ► Leaching from WPCBs was a significant emission source of BFRs in landfill. -- Abstract: Leaching assessment on five heavy metals (copper, zinc, lead, nickel and cadmium) and two brominated flame retardants (BFRs), polybrominated diphenyl ethers (PBDEs) and tetrabromobisphenol A (TBBPA), from waste printed circuit boards (WPCBs) were conducted using various leaching methods. The mean leaching concentrations of copper were the highest in both toxicity characteristic leaching procedures (TCLP) and synthetic precipitation leaching procedures (SPLP) tests at 8.6 mg/L and 1.1 mg/L, while only lead (6.2 mg/L) exceeded the TCLP criteria and Chinese EPA regulatory limit (both 5.0 mg/L). However, PBDEs and TBBPA were not detected in TCLP and SPLP tests. Then the BFRs leaching trends and potential leachabilities were further investigated in actual landfill leachates using a modified method. Leaching characteristics that fast-leaching initially followed by slow-desorption over time were generally observed. In landfill leachate tests, the highest leaching concentrations of PBDEs and TBBPA were determined at 30.39 and 12.27 μg/L. Meanwhile, the highest leaching rates were estimated to reach 0.08% and 1.00%, respectively, which were significantly influenced by the dissolved organic carbon contents of extracts, the hydrophobicities of target BFRs and the specific surface areas of WPCBs materials. These results proved that leaching from WPCBs was a significant emission source of BFRs in landfill and electronic waste recycling dumpsite

  9. Observations and modeling of bromine induced mercury oxidation in the tropical free troposphere during TORERO

    Science.gov (United States)

    Coburn, Sean; Wang, Siyuan; terSchure, Arnout; Evans, Matt; Volkamer, Rainer

    2013-04-01

    The Tropical Ocean tRoposphere Exchange experiment TORERO (Jan/Feb 2012) probed air-sea exchange of very short lived halogens and organic carbon species over the full tropospheric air column above the eastern tropical Pacific Ocean. It is well known that halogens influence the oxidative capacity in the marine boundary layer, but their distribution and abundance is less clear in the tropical free troposphere, where most of tropospheric ozone mass resides, and about 80% of the global methane destruction occurs. The oxidation of elemental mercury (GEM) by halogens (i.e., bromine) further forms gaseous oxidized mercury (GOM), and this oxidation is accelerated at the low temperatures in the free troposphere compared to the boundary layer. Free tropospheric halogen radical abundances are thus of particular importance to understand the entry pathways for GOM deposition from the free troposphere to ecosystem, and the subsequent bio-accumulation of this neurotoxin. This presentation summarizes new observational evidence for halogen vertical distributions over the full tropospheric air column, and their abundance in the tropical troposphere, at mid-latitudes in the Northern and Southern hemisphere. BrO and IO were measured simultaneously by the CU Airborne MAX-DOAS instrument, and organic halogen precursors were measured by online GC-MS (TOGA) during 22 research flights aboard the NSF/NCAR GV aircraft. We employ atmospheric box modeling constrained by observations of gas-phase hydrocarbons, aerosols, photolysis frequencies, and meterological parameters measured aboard the plane to test the observed BrO and IO abundances, and evaluate the rate of GEM oxidation in light of recent updates about the stability of the Hg-Br adduct, and it's fate (Goodsite et al., 2012; Dibble et al., 2012). Finally, we compare our measurements with output from the GEOS-Chem model for selected case studies.

  10. Fate and metabolism of the brominated flame retardant tetrabromobisphenol A (TBBPA) in rice cell suspension culture.

    Science.gov (United States)

    Wang, Songfeng; Cao, Siqi; Wang, Yongfeng; Jiang, Bingqi; Wang, Lianhong; Sun, Feifei; Ji, Rong

    2016-07-01

    Tetrabromobisphenol A (TBBPA) is the brominated flame retardant with the highest production volume and its bioaccumulation in environment has caused both human health and environmental concerns, however the fate and metabolism of TBBPA in plants is unknown. We studied the fate, metabolites, and transformation of (14)C-labeled TBBPA in rice cell suspension culture. During the incubation for 14 days, TBBPA degradation occurred continuously in the culture, accompanied by formation of one anisolic metabolite [2,6-dibromo-4-(2-(2-hydroxy)-propyl)-anisole] (DBHPA) (50% of the degraded TBBPA) and cellular debris-bound residues (46.4%) as well as mineralization (3.6%). The cells continuously accumulated TBBPA in the cytoplasm, while a small amount of DBHPA (2.1% of the initially applied TBBPA) was detectable inside the cells only at the end of incubation. The majority of the accumulated residues in the cells was attributed to the cellular debris-bound residues, accounting for 70-79% of the accumulation after the first incubation day. About 5.4% of the accumulation was associated with cell organelles, which contributed 7.5% to the cellular debris-bound residues. Based on the fate and metabolism of TBBPA in the rice cell suspension culture, a type II ipso-substitution pathway was proposed to describe the initial step for TBBPA degradation in the culture and balance the fate of TBBPA in the cells. To the best of our knowledge, our study provides for the first time the insights into the fate and metabolism of TBBPA in plants and points out the potential role of type II ipso-hydroxylation substitution in degradation of alkylphenols in plants. Further studies are required to reveal the mechanisms for the bound-residue formation (e.g., binding of residues to specific cell wall components), nature of the binding, and toxicological effects of the bound residues and DBHPA.

  11. Industry-sponsored research on the potential health and environmental effects of selected brominated flame retardants.

    Science.gov (United States)

    Hardy, M L; Biesemeier, J; Manor, O; Gentit, W

    2003-09-01

    Modern fire-fighting techniques, equipment and fire-resistant building design has lead to less destruction than in the previous centuries. However, a high fuel load in either a residence or a commercial building can overwhelm even the best firefighters or building construction, and factors affecting the fuel load have changed in recent decades. The fire load in a typical home has doubled over the last 50 years, furnishings typically include those made of petrochemicals that can behave as if containing built-in accelerant, and modern energy-efficient buildings are less able to disperse heat in the event of a fire. Flame retardant chemicals (FRs) are one means used to reduce the risk of fire. FRs are typically added or incorporated chemically into a polymer to slow or hinder the ignition or growth of a fire in low-to-moderate cost commodity polymers. One type of FR contains bromine atoms as the active moiety. The FR industry, either as individual companies or as consortia, has conducted a broad range of studies on the commercial deca-, octa- and pentabromodiphenyl oxide/ether, tetrabromobisphenol A and hexabromocyclododecane products. These five products have data in excess of the OECD Screening Informational Data Set (SIDS) and the U.S. High Production Volume (HPV) program, and sufficient data for the performance of formal EU risk assessments. The objective of this paper is to present the range of data developed by industry consortia and to provide sources for the information. We hope to facilitate further research by assembling references to industry consortia-sponsored research here. PMID:12850097

  12. Field and Satellite Observations of the Formation and Distribution of Arctic Atmospheric Bromine Above a Rejuvenated Sea Ice Cover

    Science.gov (United States)

    Nghiem, Son V.; Rigor, Ignatius G.; Richter, Andreas; Burrows, John P.; Shepson, Paul B.; Bottenheim, Jan; Barber, David G.; Steffen, Alexandra; Latonas, Jeff; Wang, Feiyue; Stern, Gary; Clemente-Colon, Pablo; Martin, Seelye; Hall, Dorothy K.; Kaleschke, Lars; Tackett, Philip; Neumann, Gregory; Asplin, Matthew G.

    2012-01-01

    Recent drastic reduction of the older perennial sea ice in the Arctic Ocean has resulted in a vast expansion of younger and saltier seasonal sea ice. This increase in the salinity of the overall ice cover could impact tropospheric chemical processes. Springtime perennial ice extent in 2008 and 2009 broke the half-century record minimum in 2007 by about one million km2. In both years seasonal ice was dominant across the Beaufort Sea extending to the Amundsen Gulf, where significant field and satellite observations of sea ice, temperature, and atmospheric chemicals have been made. Measurements at the site of the Canadian Coast Guard Ship Amundsen ice breaker in the Amundsen Gulf showed events of increased bromine monoxide (BrO), coupled with decreases of ozone (O3) and gaseous elemental mercury (GEM), during cold periods in March 2008. The timing of the main event of BrO, O3, and GEM changes was found to be consistent with BrO observed by satellites over an extensive area around the site. Furthermore, satellite sensors detected a doubling of atmospheric BrO in a vortex associated with a spiral rising air pattern. In spring 2009, excessive and widespread bromine explosions occurred in the same region while the regional air temperature was low and the extent of perennial ice was significantly reduced compared to the case in 2008. Using satellite observations together with a Rising-Air-Parcel model, we discover a topographic control on BrO distribution such that the Alaskan North Slope and the Canadian Shield region were exposed to elevated BrO, whereas the surrounding mountains isolated the Alaskan interior from bromine intrusion.

  13. Accumulation of chlorinated and brominated persistent toxic substances (PTS) and their relationship to testosterone suppression in Norway rats from Japan

    Energy Technology Data Exchange (ETDEWEB)

    Takasuga, T.; Senthilkumar, K. [Shimadzu Techno-Research Inc. (Japan); Ishizuka, M.; Fujita, S. [Graduate School of Veterinary Medicine, Hokkaido Univ. (Japan); Tanikawa, R. [Inst. of Tech., Ikari Corp. (Japan)

    2004-09-15

    Contamination of chlorinated/brominated persistent toxic substances (PTS) such as polychlorinated, -dibenzo-p-dioxins (PCDDs), -dibenzofurans (PCDFs), -biphenyls (PCBs), - organochlorine pesticides (OCPs) {l_brace}e.g., aldrin, dieldrin, endrin, chlordane compounds [cis/transchlordane, cis/trans-nonachlor, oxychlordane, heptachlor, heptachlor epoxide], hexachlorobenzene (HCB), 2,2-bis(p-chlorophenyl)-1,1,1-trichloroethane (DDTs) and its metabolities [o,p/p,p'-DDD and DDE] and hexachlorocyclohexane (HCHs){r_brace} and -brominated diphenyl ethers (PBDEs) are considered to important class of chemicals due to persistence in nature, bioaccumulation potential and adverse health effects in wildlife and humans. Among South East Asian countries, Japan reported to contaminated with aforesaid chemicals with considerable amounts. There is no document reports contamination of PTS in wild animals, which in-habit near humans. Norway rat (NR) inhabits not only near human environment but also distributed worldwide. Especially, NR feeds on human waste and shelter in and around human environment and thus exposure of toxic contaminants in this animal considered to similar with those in humans. In addition, rats have unique physiology that match with humans (e.g., they have similar pathogens as humans have). Therefore, analysis of toxic contaminants in NR considered as indirect measure in humans. Considering those facts, in this study, we analyzed NR collected from urban area, rural area, waste dumping or land fill site and isolated remote island from Japan. Particularly several chlorinated and brominated organic contaminants such as PCDDs, PCDFs, PCBs, DDTs, HCHs, chlordane compounds, heptachlor, heptachlor epoxide, HCB, aldrin, dieldrin, endrin and PBDEs were analyzed in rat livers by isotope dilution technique using HRGC-HRMS. In addition, laboratory Wistar rats (WR) were used as control.

  14. Highly brominated anthracenes as precursors for the convenient synthesis of 2,9,10-trisubstituted anthracene derivatives

    Directory of Open Access Journals (Sweden)

    2008-12-01

    Full Text Available When 9,10-dibromoanthracene was treated with bromine in CCl4 without a catalyst, 1,2,3,4,9,10-hexabromo-1,2,3,4-tetrahydroanthracene (3 was obtained in 95% yield in the absence of other stereoisomers or rearomatization products. We investigated the base-induced elimination reaction of hexabromide 3 under various conditions. Pyridine-induced elimination of hexabromide 3 afforded 2,9,10-tribromoanthracene (12 in 75% yield, and tribromide 12 was transformed to trimethoxy compound 13 and trinitrile 14 by copper-assisted nucleophilic substitution reactions.

  15. Detection of chlorine and bromine in free liquid from the sphenoid sinus as an indicator of seawater drowning.

    Science.gov (United States)

    Tanaka, Naoko; Kinoshita, Hiroshi; Jamal, Mostofa; Takakura, Ayaka; Kumihashi, Mitsuru; Miyatake, Nobuyuki; Tsutsui, Kunihiko; Ameno, Kiyoshi

    2015-09-01

    We have investigated the usefulness of elemental analysis by energy-dispersive X-ray spectroscopy (EDX) in the examination of free liquid from the sphenoid sinus of drowning victims. We detected both chlorine and bromine in liquid taken from the sphenoid sinus of seawater drowning victims. Because these elements were below the quantification limit in freshwater cases, we could easily distinguish seawater from freshwater drowning cases. Detection of these elements from the liquid in the sphenoid sinuses of drowning victims may be useful as a supportive measure for seawater drowning. PMID:26415653

  16. Isoquinolinium bromochromate: An efficient and stable reagent for bromination of hydroxylated aromatic compounds and oxidation of alcohols

    Institute of Scientific and Technical Information of China (English)

    Sandeep V. Khansole; Shivaji B. Patwari; Archana Y. Vibhute; Yeshwant B. Vibhute

    2009-01-01

    The new chromium (VI) oxidizing reagent isoquinolinium bromochromate (IQBC) was prepared and characterized. The IQBC has been found to be stable and an efficient solid reagent which can be easily prepared in good yield. It act as an efficient brominating reagent for hydroxylated aromatic compounds as well as good oxidizing reagent for the conversion of alcohols to carbonyl compounds in good to excellent yield. The synthesized isoquinolinium bromochromate is more ideal reagent, with number of specification including: higher yield, mild conditions and easy preparation. The results obtained with isoquinolinium bromochromate are satisfactory and suggest that the reagent has few advantages over the existing chromium (VI) reagents.

  17. Analysis of Causes Leading to High Bromine Number of C8+Aromatics and Short Clay Service Life and Countermeasures Proposed

    Institute of Scientific and Technical Information of China (English)

    Li Yousong; Ni Xiaoliang; Yan Jun

    2007-01-01

    After comparing the operating status of other catalytic reforming units and evaluation of the side-cut stream tests,the refinery investigated the influence of the feedstock property,clay types,and operating regime of the clay tower and catalytic reforming unit on the service life of the clay.Test results had revealed that the low potential aromatic content of the reformer feed and high operating severity were the critical causes leading to high bromine number of the C8+ aromatics feed for the PX unit and the shortened service life of clay.This article also puts forward the corresponding remedial measures.

  18. Neurobehavioral function and low-level exposure to brominated flame retardants in adolescents: a cross-sectional study

    Directory of Open Access Journals (Sweden)

    Kiciński Michał

    2012-11-01

    Full Text Available Abstract Background Animal and in vitro studies demonstrated a neurotoxic potential of brominated flame retardants, a group of chemicals used in many household and commercial products to prevent fire. Although the first reports of detrimental neurobehavioral effects in rodents appeared more than ten years ago, human data are sparse. Methods As a part of a biomonitoring program for environmental health surveillance in Flanders, Belgium, we assessed the neurobehavioral function with the Neurobehavioral Evaluation System (NES-3, and collected blood samples in a group of high school students. Cross-sectional data on 515 adolescents (13.6-17 years of age was available for the analysis. Multiple regression models accounting for potential confounders were used to investigate the associations between biomarkers of internal exposure to brominated flame retardants [serum levels of polybrominated diphenyl ether (PBDE congeners 47, 99, 100, 153, 209, hexabromocyclododecane (HBCD, and tetrabromobisphenol A (TBBPA] and cognitive performance. In addition, we investigated the association between brominated flame retardants and serum levels of FT3, FT4, and TSH. Results A two-fold increase of the sum of serum PBDE’s was associated with a decrease of the number of taps with the preferred-hand in the Finger Tapping test by 5.31 (95% CI: 0.56 to 10.05, p = 0.029. The effects of the individual PBDE congeners on the motor speed were consistent. Serum levels above the level of quantification were associated with an average decrease of FT3 level by 0.18 pg/mL (95% CI: 0.03 to 0.34, p = 0.020 for PBDE-99 and by 0.15 pg/mL (95% CI: 0.004 to 0.29, p = 0.045 for PBDE-100, compared with concentrations below the level of quantification. PBDE-47 level above the level of quantification was associated with an average increase of TSH levels by 10.1% (95% CI: 0.8% to 20.2%, p = 0.033, compared with concentrations below the level of quantification. We did not

  19. Oxidative treatment of bromide-containing waters: formation of bromine and its reactions with inorganic and organic compounds--a critical review.

    Science.gov (United States)

    Heeb, Michèle B; Criquet, Justine; Zimmermann-Steffens, Saskia G; von Gunten, Urs

    2014-01-01

    Bromide (Br(-)) is present in all water sources at concentrations ranging from ≈ 10 to >1000 μg L(-1) in fresh waters and about 67 mg L(-1) in seawater. During oxidative water treatment bromide is oxidized to hypobromous acid/hypobromite (HOBr/OBr(-)) and other bromine species. A systematic and critical literature review has been conducted on the reactivity of HOBr/OBr(-) and other bromine species with inorganic and organic compounds, including micropollutants. The speciation of bromine in the absence and presence of chloride and chlorine has been calculated and it could be shown that HOBr/OBr(-) are the dominant species in fresh waters. In ocean waters, other bromine species such as Br2, BrCl, and Br2O gain importance and may have to be considered under certain conditions. HOBr reacts fast with many inorganic compounds such as ammonia, iodide, sulfite, nitrite, cyanide and thiocyanide with apparent second-order rate constants in the order of 10(4)-10(9)M(-1)s(-1) at pH 7. No rate constants for the reactions with Fe(II) and As(III) are available. Mn(II) oxidation by bromine is controlled by a Mn(III,IV) oxide-catalyzed process involving Br2O and BrCl. Bromine shows a very high reactivity toward phenolic groups (apparent second-order rate constants kapp ≈ 10(3)-10(5)M(-1)s(-1) at pH 7), amines and sulfamides (kapp ≈ 10(5)-10(6)M(-1)s(-1) at pH 7) and S-containing compounds (kapp ≈ 10(5)-10(7)M(-1)s(-1) at pH 7). For phenolic moieties, it is possible to derive second-order rate constants with a Hammett-σ-based QSAR approach with [Formula in text]. A negative slope is typical for electrophilic substitution reactions. In general, kapp of bromine reactions at pH 7 are up to three orders of magnitude greater than for chlorine. In the case of amines, these rate constants are even higher than for ozone. Model calculations show that depending on the bromide concentration and the pH, the high reactivity of bromine may outweigh the reactions of chlorine during

  20. Spectroscopic UV/vis limb measurements from aboard the NASA Global Hawk: Implications for the photochemistry and budget of bromine in the tropical tropopause layer

    OpenAIRE

    Werner, Bodo

    2016-01-01

    The present thesis reports on the world's first measurements of the second most important ozone-depleting halogen bromine at the entrance to the stratosphere (14 - 18.5 km, theta = 330 - 400 K) over the East and Central Pacific in late winter 2013. The measurements were performed within the NASA-ATTREX project from aboard the unmanned aerial vehicle Global Hawk. For the interpretation of the remote-sensing DOAS measurements of O3, NO2 and BrO, use of complementary measurements of brominated s...

  1. Ion Chromatography.

    Science.gov (United States)

    Mulik, James D.; Sawicki, Eugene

    1979-01-01

    Accurate for the analysis of ions in solution, this form of analysis enables the analyst to directly assay many compounds that previously were difficult or impossible to analyze. The method is a combination of the methodologies of ion exchange, liquid chromatography, and conductimetric determination with eluant suppression. (Author/RE)

  2. Cobalt catalyzed peroxymonosulfate oxidation of tetrabromobisphenol A: Kinetics, reaction pathways, and formation of brominated by-products.

    Science.gov (United States)

    Ji, Yuefei; Kong, Deyang; Lu, Junhe; Jin, Hao; Kang, Fuxing; Yin, Xiaoming; Zhou, Quansuo

    2016-08-01

    Degradation of tetrabromobisphenol A (TBBPA), a flame retardant widely spread in the environment, in Co(II) catalyzed peroxymonosulfate (PMS) oxidation process was systematically explored. The second-order-rate constant for reaction of sulfate radical (SO4(-)) with TBBPA was determined to be 5.27×10(10)M(-1)s(-1). Apparently, degradation of TBBPA showed first-order kinetics to the concentrations of both Co(II) and PMS. The presence of humic acid (HA) and bicarbonate inhibited TBBPA degradation, most likely due to their competition for SO4(-). Degradation of TBBPA was initiated by an electron abstraction from one of the phenolic rings. Detailed transformation pathways were proposed, including β-scission of isopropyl bridge, phenolic ring oxidation, debromination and coupling reactions. Further oxidative degradation of intermediates in Co(II)/PMS process yielded brominated disinfection by-products (Br-DBPs) such as bromoform and brominated acetic acids. Evolution profile of Br-DBPs showed an initially increasing and then decreasing pattern with maximum concentrations occurring around 6-10h. The presence of HA enhanced the formation of Br-DBPs significantly. These findings reveal potentially important, but previously unrecognized, formation of Br-DBPs during sulfate radical-based oxidation of bromide-containing organic compounds that may pose toxicological risks to human health. PMID:27107323

  3. Accumulation of organochlorines and brominated flame retardants in estuarine and marine food chains: field measurements and model calculations.

    Science.gov (United States)

    Veltman, Karin; Hendriks, Jan; Huijbregts, Mark; Leonards, Pim; van den Heuvel-Greve, Martine; Vethaak, Dick

    2005-10-01

    Food chain accumulation of organochlorines and brominated flame retardants in estuarine and marine environments is compared to model estimations and fresh water field data. The food chain consists of herbivores, detritivores and primary and secondary carnivores i.e. fish, fish-eating birds and marine mammals. Accumulation of polychlorinated biphenyls is predicted well by OMEGA for herbi-detritivores and primary and secondary carnivorous fish. Ratios are similar to those found for fresh water species. Accumulation ratios for fish-eating birds and mammals are overestimated by the model, which is attributed partly to biotransformation of meta-para unsubstituted congeners. Additionally, birds may feed in other less polluted areas. For brominated diphenylethers (BDE) accumulation patterns are highly species and congener specific. Accumulation depends on both K(ow) and metabolization capacities. BDE47 is the predominant congener in lower trophic levels. For marine birds and mammals accumulation ratios of BDE99 and 100 are similar to or higher than ratios of persistent PCBs. PMID:15893330

  4. Bromination of graphene: a new route to making high performance transparent conducting electrodes with low optical losses

    KAUST Repository

    Mansour, Ahmed

    2015-09-03

    The high optical transmittance, electrical conductivity, flexibility and chemical stability of graphene have triggered great interest in its application as a transparent conducting electrode material and as a potential replacement for indium doped tin oxide. However, currently available large scale production methods such as chemical vapor deposition produce polycrystalline graphene, and require additional transfer process which further introduces defects and impurities resulting in a significant increase in its sheet resistance. Doping of graphene with foreign atoms has been a popular route for reducing its sheet resistance which typically comes at a significant loss in optical transmission. Herein, we report the successful bromine doping of graphene resulting in air-stable transparent conducting electrodes with up to 80% reduction of sheet resistance reaching ~180 Ω/ at the cost of 2-3% loss of optical transmission in case of few layer graphene and 0.8% in case of single layer graphene. The remarkably low tradeoff in optical transparency leads to the highest enhancements in figure of merit reported thus far. Furthermore, our results show a controlled increase in the workfunction up to 0.3 eV with the bromine content. These results should help pave the way for further development of graphene as potentially a highly transparent substitute to other transparent conducting electrodes in optoelectronic devices.

  5. Tracing organophosphorus and brominated flame retardants and plasticizers in an estuarine food web.

    Science.gov (United States)

    Brandsma, Sicco H; Leonards, Pim E G; Leslie, Heather A; de Boer, Jacob

    2015-02-01

    Nine organophosphorus flame retardants (PFRs) were detected in a pelagic and benthic food web of the Western Scheldt estuary, The Netherlands. Concentrations of several PFRs were an order of magnitude higher than those of the brominated flame retardants (BFRs). However, the detection frequency of the PFRs (6-56%) was lower than that of the BFRs (50-97%). Tris(2-butoxyethyl) phosphate (TBOEP), tris(isobutyl) phosphate (TIBP) and tris(2-chloroisopropyl) phosphate (TCIPP) were the dominant PFRs in sediment with median concentrations of 7.0, 8.1 and 1.8 ng/g dry weight (dw), respectively. PFR levels in the suspended particular matter (SPM) were 2-12 times higher than that in sediment. TBOEP, TCIPP, TIBP, tris(2-chloroethyl) phosphate (TCEP) and tris(phenyl) phosphate (TPHP) were found in organisms higher in the estuarine food web. The highest PFR concentrations in the benthic food web were found in sculpin, goby and lugworm with median concentrations of 17, 7.4, 4.6 and 2.0 ng/g wet weight (ww) for TBOEP, TIBP, TCIPP and TPHP, respectively. Comparable levels were observed in the pelagic food web, BDE209 was the predominant PBDE in sediment and SPM with median concentrations up to 9.7 and 385 ng/g dw, respectively. BDE47 was predominant in the biotic compartment of the food web with highest median levels observed in sculpin and common tern eggs of 79 ng/g lipid weight (lw) (2.5 ng/g ww) and 80 ng/g lw (11 ng/g ww), respectively. Trophic magnification was observed for all PBDEs with the exception of BDE209. Indications of trophic magnification of PFRs were observed in the benthic food web for TBOEP, TCIPP and TCEP with tentative trophic magnification factors of 3.5, 2.2 and 2.6, respectively (pwebs. The relative high PFR levels in several fish species suggest high emissions and substantial exposure of organisms to PFRs in the Western Scheldt.

  6. Measurement-based modelling of bromine-induced oxidation of mercury above the Dead Sea

    Directory of Open Access Journals (Sweden)

    E. Tas

    2012-03-01

    Full Text Available Atmospheric mercury depletion events (AMDEs outside the polar region – driven by high levels of gaseous Br and BrO (i.e., BrOx – were observed recently in the warm Dead Sea boundary layer. The efficient oxidation of gaseous elemental mercury (GEM under temperate conditions by BrOx was unexpected considering that the thermal back dissociation reaction of HgBr is about 2.5 orders of magnitude higher under Dead Sea temperatures compared to polar temperatures, and hence was expected to significantly slow down GEM oxidation under warm temperatures. The goal of this modelling study was to improve understanding of the interaction of reactive bromine and mercury during Dead Sea AMDEs using numerical simulations based on a comprehensive measurement campaign in summer 2009.

    Our analysis is focused on daytime AMDE when chemical processes dominate concentration changes. Best agreements between simulations and observations were achieved using rate constants for kHg+Br and kHg+BrO of 2.7 × 10−13 cm3 molecule−1 s−1 and 1.5 × 10−13 cm3 molecule−1 s−1, respectively. Our model also predicted that a rate constant kHg+BrO of 5.0 × 10−14 cm3 molecule−1 s−1 may be considered as a minimum, which is higher than most reported values. These rate constants suggest that BrO could be a more efficient oxidant than Br in the troposphere as long as [Br]/[BrO] ratios are smaller than ~0.2 to 0.5. Under Dead Sea conditions, these kinetics demonstrate a high efficiency and central role of BrOx for AMDEs, with relative contributions to GEM depletion of more than ~90%. Unexpectedly, BrO was found to be the dominant oxidant with relative contributions above 80%. The strong contribution of BrO could explain why the efficiency of GEM

  7. Legacy and current-use brominated flame retardants in the Barn Owl.

    Science.gov (United States)

    Eulaers, Igor; Jaspers, Veerle L B; Pinxten, Rianne; Covaci, Adrian; Eens, Marcel

    2014-02-15

    The present study investigated the current-use brominated flame retardants (BFRs) tetrabromobisphenol A (TBBPA) and hexabromocyclododecane (HBCD), simultaneously with legacy polybrominated diphenyl ethers (PBDEs), in Barn Owls (Tyto alba) collected from two regions with a contrasting degree of urbanisation and vicinity to point sources (Flanders in Belgium versus Normandy in France). Both tissues (muscle, liver, adipose and preen gland) and feathers (primary, tail and body feathers) showed elevated HBCD concentrations in Flanders, close to Europe's sole HBCD production plant in the Netherlands, and identified Normandy as a historical source region for PBDEs. In sharp contrast, the reactive BFR TBBPA bioaccumulated poorly (2.3%) in tissue samples, but was present in 96% of all body feather samples (0.36-7.07ngg(-1)dw), equally in both regions. PBDE concentrations in tissues (7.46-903 ng g(-1)lw) were considerably lower in the investigated Flemish Barn Owls, collected in 2008/2009, compared to specimens collected in 2003/2004 (46-11,000 ng g(-1)lw), possibly suggesting the effectiveness of the 2004 European ban of Penta- and Octa-BDE mixtures. Feathers showed a similar trend and additionally exhibited HBCD concentrations (0.02-333 ng g(-1)dw) surpassing those of PBDEs (0.50-10.4 ng g(-1)dw). While body feathers were a reliable matrix to predict both internal PBDE (0.21 ≤ R(2)≤ 0.67) and HBCD body burdens (0.20 ≤ R(2) ≤ 0.37), the suitability of primary and tail feathers appeared to be confounded by external contamination and moult. In conclusion, the present study clearly showed that the reactive versus additive use of BFRs results in contrasting exposure scenarios in a species higher up the food chain, and therefore may have profound implications for environmental health. In addition, the presented results extend the promising use of feathers as a non-destructive sampling strategy for current-use BFRs, and show that birds of prey are valid early

  8. Comparison of direct injection nebulizer and desolvating microconcentric nebulizer for analysis of chlorine-, bromine- and iodine-containing compounds by reversed phase HPLC with ICP-MS detection

    DEFF Research Database (Denmark)

    Jensen, B.P.; Gammelgaard, Bente; Hansen, S.H.;

    2003-01-01

    With the purpose of finding ways to combine micro-bore reversed phase HPLC with ICP-MS detection for analysis of drug substances containing chlorine, bromine and iodine, the suitability of a direct injection nebulizer and an Aridus desolvating microconcentric nebulizer was compared. Using the...

  9. Brominated flame retardants in fish and shellfish - levels and contribution of fish consumption to dietary exposure of Dutch citizens to HBCD

    NARCIS (Netherlands)

    Leeuwen, van S.P.J.; Boer, de J.

    2008-01-01

    In order to determine the contamination with brominated flame retardants (BFR) in fish regularly consumed by Dutch citizens, 44 samples of freshwater fish, marine fish, and shellfish were analyzed for polybrominated diphenyl ethers (PBDE), tetrabromobisphenol-A (TBBP-A) and its methylated derivative

  10. A comparison of the in vitro cyto- and neurotoxicity of brominated and halogen-free flame retardants : prioritization in search for safe(r) alternatives

    NARCIS (Netherlands)

    Hendriks, Hester S; Meijer, Marieke; Muilwijk, Mirthe; van den Berg, Martin; Westerink, Remco H S

    2014-01-01

    Brominated flame retardants (BFRs) are abundant persistent organic pollutants with well-studied toxicity. The toxicological and ecological concerns associated with BFRs argue for replacement by safe(r) alternatives. Though previous research identified the nervous system as a sensitive target organ f

  11. Brominated flame retardant levels in human milk and serum from MAMA study participants: Correlations over time, matrix, and with questionnaire results

    Science.gov (United States)

    Brominated flame retardants (BFRs) are synthetic, lipophilic, and bioaccumulative compounds used to prevent the combustion of a variety of items including electronics and furniture. There are 75 classes of BFRs, two of which are the polybrominated biphenyls (PBB) and the polybrom...

  12. Exposure to brominated flame retardants, perfluorinated compounds, phthalates and phenols in European birth cohorts: ENRIECO evaluation, first human biomonitoring results, and recommendations

    NARCIS (Netherlands)

    Casas, M.; Chevrier, C.; Hond, E.D.; Fernandez, M.F.; Pierik, F.; Philippat, C.; Slama, R.; Toft, G.; Vandentorren, S.; Wilhelm, M.; Vrijheid, M.

    2013-01-01

    There are emerging concerns about potential effects on child health and development of early-life exposure to substances such as brominated flame retardants (BFRs), perfluorinated compounds (PFCs), phthalates and phenols (including bisphenol A (BPA)); pregnancy and birth cohort studies are ideally d

  13. Simultaneous balloon-borne measurements of the key inorganic bromine species BrO and BrONO2 in the stratosphere: DOAS and MIPAS-B evaluation

    Science.gov (United States)

    Kazarski, Sebastian; Maucher, Guido; Ebersoldt, Andreas; Butz, André; Friedl-Vallon, Felix; Höpfner, Michael; Kleinert, Anne; Nordmeyer, Hans; Oelhaf, Hermann; Pfeilsticker, Klaus; Sinnhuber, Björn-Martin; Wetzel, Gerald; Orphal, Johannes

    2015-04-01

    Inorganic bromine contributes to a loss of stratospheric ozone of about 25 - 30%. Past studies have demonstrated several uncertainties in the photochemistry of stratospheric bromine, especially by considering the three body reaction (kBrONO2) BrO + NO2 + M → BrONO2 + M, and the photolysis frequencies of BrONO2 (jBrONO2). Hence, an improved knowledge of the ratio jBrONO2/kBrONO2 is crucial to better assess the bromine-related loss of ozone as well as the total amount of bromine in the stratosphere. Here, we report on the first simultaneous balloon-borne measurements of NO2, BrO, and BrONO2 in the stratosphere, performed over Timmins (Ontario, 49 °N, Canada) on Sept., 7th and 8th, 2014. During the flight the targeted species were monitored by remote sensing in the UV, visible and mid-IR spectral ranges by Differential Optical Absorption Spectroscopy (DOAS) and Michelson Interferometer for Passive Atmospheric Sounding (MIPAS-B), respectively. The analysis and interpretation of the measurements involves radiative transfer as well as photochemical modelling. Major features of the applied techniques are reported and first results of the DOAS as well as MIPAS-B evaluation are discussed. Further investigations address inter-comparisons of the retrieved NO2, BrO, and O3 concentrations and volume mixing ratios, to demonstrate validations of both evaluation methods.

  14. Analysis of 3-chloro-4-(dichloromethyl)-5-hydroxy-2(5H)-furanone (MX) and its brominated analogues in chlorine-treated water by gas chromatography coupled to triple quadrupole tandem mass spectrometry (GC-QqQ-MS/MS).

    Science.gov (United States)

    Planas, Carles; Ventura, Francesc; Caixach, Josep; Martín, Jordi; Boleda, M Rosa; Paraira, Miquel

    2015-11-01

    A simple, selective and sensitive method for the analysis of the strong mutagen 3-chloro-4-(dichloromethyl)-5-hydroxy-2(5H)-furanone (MX) and its brominated analogues (BMXs) in chlorine-treated water has been developed. The method is based on gas chromatography coupled to triple quadrupole tandem mass spectrometry (GC-QqQ-MS/MS), previous liquid-liquid extraction (LLE) of a smaller sample volume compared to other methods and on-line derivatization with a silylation reactive. GC-QqQ-MS/MS has been raised as an alternative easier to perform than gas chromatography coupled to high resolution mass spectrometry (GC-HRMS) for the analysis of MX and BMXs, and it allows to achieve low LODs (0.3 ng/L for MX and 0.4-0.9 ng/L for BMXs). This technique had not been previously described for the analysis of MX and BMXs. Quality parameters were calculated and real samples related to 3 drinking water treatment plants (DWTPs), tap water and both untreated and chlorinated groundwater were analyzed. Concentrations of 0.3-6.6 ng/L for MX and 1.0-7.3 ng/L for BMXs were detected. Results were discussed according to five of the main factors affecting MX and BMXs formation in chlorine-treated water (organic precursors, influence of bromide ions, evolution of MX and BMXs in the drinking water distribution system, groundwater chlorination and infiltration of water coming from chlorination processes in groundwater).

  15. Speciation of the bio-available iodine and bromine forms in edible seaweed by high performance liquid chromatography hyphenated with inductively coupled plasma-mass spectrometry

    International Nuclear Information System (INIS)

    Highlights: ► Bioavailable iodine and bromine speciation in edible seaweed were developed. ► In vitro dialyzability was used to assess the bioavailable fractions. ► AEC hyphenated with inductively coupled plasma-mass spectrometry was used. ► Iodide, MIT, DIT, bromide and bromate were found in dialyzates from edible seaweed. ► Positive correlation between bioavailability and protein contents was found. - Abstract: A bioavailability study based on an in vitro dialyzability approach has been applied to assess the bio-available fractions of iodine and bromine species from edible seaweed. Iodide, iodate, 3-iodo-tyrosine (MIT), 3,5-diiodo-tyrosine (DIT), bromide and bromate were separated by anion exchange chromatography under a gradient elution mode (175 mM ammonium nitrate plus 15% (v/v) methanol, pH 3.8, as a mobile phase, and flow rates within the 0.5–1.5 mL min−1 range). Inductively coupled plasma-mass spectrometry (ICP-MS) was used as a selective detector for iodine (127I) and bromine (79Br). Low dialyzability ratios (within the 2.0–18% range) were found for iodine species; whereas, moderate dialyzability percentages (from 9.0 to 40%) were obtained for bromine species. Iodide and bromide were the major species found in the dialyzates from seaweed, although MIT and bromate were also found in the dialyzates from most of the seaweed samples analysed. However, DIT was only found in dialyzates from Wakame, Kombu, and NIES 09 (Sargasso) certified reference material; whereas, iodate was not found in any dialyzate. Iodine dialyzability was found to be dependent on the protein content (negative correlation), and on the carbohydrate and dietary fibre levels (positive correlation). However, bromine dialyzability was only dependent on the protein amount in seaweed (negative correlation).

  16. Maternal transfer of emerging brominated and chlorinated flame retardants in European eels

    Energy Technology Data Exchange (ETDEWEB)

    Sühring, Roxana, E-mail: roxana.suehring@hzg.de [Helmholtz-Zentrum Geesthacht, Centre for Materials and Coastal Research, Institute of Coastal Research, Department for Environmental Chemistry, Max-Planck-Strasse 1, 21502 Geesthacht (Germany); Leuphana University Lüneburg, Institute of Sustainable and Environmental Chemistry, Scharnhorststraße 1, 21335 Lüneburg (Germany); Freese, Marko [Thünen Institute of Fisheries Ecology, Palmaille 9, 22767 Hamburg (Germany); Schneider, Mandy [Leuphana University Lüneburg, Institute of Sustainable and Environmental Chemistry, Scharnhorststraße 1, 21335 Lüneburg (Germany); Schubert, Sophia; Pohlmann, Jan-Dag [Thünen Institute of Fisheries Ecology, Palmaille 9, 22767 Hamburg (Germany); Alaee, Mehran [Water Science and Technology Directorate, Environment Canada, Burlington, Ontario, L7R4A6 Canada (Canada); Wolschke, Hendrik [Helmholtz-Zentrum Geesthacht, Centre for Materials and Coastal Research, Institute of Coastal Research, Department for Environmental Chemistry, Max-Planck-Strasse 1, 21502 Geesthacht (Germany); Leuphana University Lüneburg, Institute of Sustainable and Environmental Chemistry, Scharnhorststraße 1, 21335 Lüneburg (Germany); Hanel, Reinhold [Thünen Institute of Fisheries Ecology, Palmaille 9, 22767 Hamburg (Germany); Ebinghaus, Ralf [Helmholtz-Zentrum Geesthacht, Centre for Materials and Coastal Research, Institute of Coastal Research, Department for Environmental Chemistry, Max-Planck-Strasse 1, 21502 Geesthacht (Germany); Marohn, Lasse [Thünen Institute of Fisheries Ecology, Palmaille 9, 22767 Hamburg (Germany)

    2015-10-15

    The European eel (Anguilla anguilla) is regarded as a critically endangered species. Scientists are in agreement that the “quality of spawners” is a vital factor for the survival of the species. This quality can be impaired by parasites, disease and pollution. Especially endocrine disrupting organic chemicals pose a potential threat to reproduction and development of offspring. To our knowledge, the findings in this publication for the first time describe maternal transfer of contaminants in eels. We analysed the concentrations of in total 53 polybrominated diphenyl ethers (PBDEs) and their halogenated substitutes in muscle, gonads and eggs of artificially matured European eels and in muscle and gonads of untreated European eels that were used for comparison. We found evidence that persistent organic pollutants such as PBDEs, as well as their brominated and chlorinated substitutes are redistributed from muscle tissue to gonads and eggs. Concentrations ranged from 0.001 ng g{sup −1} ww for sum Dechlorane metabolites (DPMA, aCL{sub 10}DP, aCl{sub 11}DP) to 2.1 ng g{sup −1} ww for TBA in eggs, 0.001 ng g{sup −1} ww for Dechlorane metabolites to 9.4 ng g{sup −1} ww for TBA in gonads and 0.002 ng g{sup −1} ww for Dechlorane metabolites to 54 ng g{sup −1} ww for TBA in muscle tissue. Average egg muscle ratios (EMRs) for compounds detectable in artificially matured eels from both Schlei Fjord and Ems River ranged from 0.01 for Dechlorane 602 (DDC-DBF) to 10.4 for PBEB. Strong correlations were found between flame retardant concentrations and lipid content in the analysed tissue types, as well as transfer rates and octanol–water partitioning coefficient, indicating that these parameters were the driving factors for the observed maternal transfer. Furthermore, indications were found, that TBP-DBPE, TBP-AE, BATE and TBA have a significant uptake from the surrounding water, rather than just food and might additionally be formed by metabolism or

  17. Maternal transfer of emerging brominated and chlorinated flame retardants in European eels

    International Nuclear Information System (INIS)

    The European eel (Anguilla anguilla) is regarded as a critically endangered species. Scientists are in agreement that the “quality of spawners” is a vital factor for the survival of the species. This quality can be impaired by parasites, disease and pollution. Especially endocrine disrupting organic chemicals pose a potential threat to reproduction and development of offspring. To our knowledge, the findings in this publication for the first time describe maternal transfer of contaminants in eels. We analysed the concentrations of in total 53 polybrominated diphenyl ethers (PBDEs) and their halogenated substitutes in muscle, gonads and eggs of artificially matured European eels and in muscle and gonads of untreated European eels that were used for comparison. We found evidence that persistent organic pollutants such as PBDEs, as well as their brominated and chlorinated substitutes are redistributed from muscle tissue to gonads and eggs. Concentrations ranged from 0.001 ng g−1 ww for sum Dechlorane metabolites (DPMA, aCL10DP, aCl11DP) to 2.1 ng g−1 ww for TBA in eggs, 0.001 ng g−1 ww for Dechlorane metabolites to 9.4 ng g−1 ww for TBA in gonads and 0.002 ng g−1 ww for Dechlorane metabolites to 54 ng g−1 ww for TBA in muscle tissue. Average egg muscle ratios (EMRs) for compounds detectable in artificially matured eels from both Schlei Fjord and Ems River ranged from 0.01 for Dechlorane 602 (DDC-DBF) to 10.4 for PBEB. Strong correlations were found between flame retardant concentrations and lipid content in the analysed tissue types, as well as transfer rates and octanol–water partitioning coefficient, indicating that these parameters were the driving factors for the observed maternal transfer. Furthermore, indications were found, that TBP-DBPE, TBP-AE, BATE and TBA have a significant uptake from the surrounding water, rather than just food and might additionally be formed by metabolism or biotransformation processes. Dechloranes seem to be of

  18. Variation in concentrations of organochlorines and brominated flame retardants among eggs in abandoned clutches of a terrestrial raptor.

    Science.gov (United States)

    Bustnes, Jan O; Bangjord, Georg; Yoccoz, Nigel G

    2015-01-01

    Bird eggs are often used to measure various pollutants in monitoring programs. In protected species, however, it might only be possible to collect eggs abandoned by the parent birds. In order to assess the appropriateness of abandoned eggs for contaminant monitoring we examined intra-clutch variation in concentrations of 24 halogenated organic pollutants (16 organochlorines [OCs] and 8 brominated flame retardants) in six abandoned tawny owl (Strix aluco) clutches from central Norway. The variation among eggs within a clutch was low for nearly all compounds (intra-class correlation >0.9 both for lipid- and wet weight). This study suggests that abandoned eggs provide a relatively reliable measurement of lipophilic pollutants in clutches of terrestrial raptors such as the tawny owl. PMID:25463262

  19. Fission and nuclear fragmentation of silver and bromine nuclei by photons of 1-6 GeV

    International Nuclear Information System (INIS)

    The studies of fission and fragmentation of silver and bromine nuclei by Bremsstrahlung photons of 1.6 GeV energy range are presented. The Il ford-KO nuclear emulsion submitted to Bremsstrahlung beams in Deutsches Elektronen Synchrotron (DESY) with total doses of 10'' equivalent photons, was used for nuclear fragment detection. The discrimination of fission and fragmentation events was done analysing angular distribution, range and angles between fragments. The results of fragment range distributions, angular distributions, distributions of angles between fragments, distributions of ratio between range, velocity distributions forward/backward ratio, cross sections of fission and fragmentation, nuclear fissionability and ternary fission frequency are presented and discussed. (M.C.K.)

  20. Atmospheric bromine flux from the coastal Abu Dhabi sabkhat: A ground-water mass-balance investigation

    Science.gov (United States)

    Wood, W.W.; Sanford, W.E.

    2007-01-01

    A solute mass-balance study of ground water of the 3000 km2 coastal sabkhat (salt flats) of the Emirate of Abu Dhabi, United Arab Emirates, documents an annual bromide loss of approximately 255 metric tons (0.0032 Gmoles), or 85 kg/km2. This value is an order of magnitude greater than previously published direct measurements from the atmosphere over an evaporative environment of a salar in Bolivia. Laboratory evidence, consistent with published reports, suggests that this loss is by vapor transport to the atmosphere. If this bromine flux to the atmosphere is representative of the total earth area of active salt flats then it is a significant, and generally under recognized, input to the global atmospheric bromide flux.

  1. Determination of bromine, chlorine and iodine in environmental aqueous samples by epithermal neutron activation analysis and Compton suppression

    Science.gov (United States)

    Landsberger, S.; O'Kelly, D. J.; Braisted, J.; Panno, S.

    2006-01-01

    Halides, particularly Br- and Cl-, have been used as indicators of potential sources of Na+ and Cl- in surface water and groundwater with limited success. Contamination of groundwater and surface water by Na+ and Cl- is a common occurrence in growing urban areas and adversely affects municipal and private water supplies in Illinois and other states, as well as vegetation in environmentally sensitive areas. Neutron activation analysis (NAA) can be effectively used to determine these halogens, but often the elevated concentrations of sodium and chlorine in water samples can give rise to very high detection limits for bromine and iodine due to elevated backgrounds from the activation process. We present a detailed analytical scheme to determine Cl, Br and I in aqueous samples with widely varying Na and Cl concentrations using epithermal NAA in conjunction with Compton suppression. ?? 2006 Akade??miai Kiado??.

  2. Corrosion mechanism of 13Cr stainless steel in completion fluid of high temperature and high concentration bromine salt

    Science.gov (United States)

    Liu, Yan; Xu, Lining; Lu, Minxu; Meng, Yao; Zhu, Jinyang; Zhang, Lei

    2014-09-01

    A series of corrosion tests of 13Cr stainless steel were conducted in a simulated completion fluid environment of high temperature and high concentration bromine salt. Corrosion behavior of specimens and the component of corrosion products were investigated by means of scanning electron microscope (SEM), confocal laser scanning microscopy (CLSM) and X-ray photoelectron spectroscopy (XPS). The results indicate that 13Cr steel suffers from severe local corrosion and there is always a passive halo around every pit. The formation mechanism of the passive halo is established. OH- ligand generates and adsorbs in a certain scale because of abundant OH- on the surface around the pits. Passive film forms around each pit, which leads to the occurrence of passivation in a certain region. Finally, the dissimilarities in properties and morphologies of regions, namely the pit and its corresponding passive halo, can result in different corrosion sensitivities and may promote the formation of macroscopic galvanic pairs

  3. Brominated flame retardants (BFRs) in indoor and outdoor air in a community in Guangzhou, a megacity of southern China.

    Science.gov (United States)

    Ding, Nan; Wang, Tao; Chen, She-Jun; Yu, Mei; Zhu, Zhi-Cheng; Tian, Mi; Luo, Xiao-Jun; Mai, Bi-Xian

    2016-05-01

    Indoor environments contribute a significant portion of human exposure to brominated flame retardants (BFRs) because of their extensive use in various household products. This study investigates the occurrence of a number of BFRs in the indoor and outdoor air in a megacity in southern China, in which little information on indoor BFRs contamination is available. The estimated total PBDE concentrations ranged from 1.43 to 57 pg/m(3) indoors and from 1.21 to 1522 pg/m(3) outdoors. The indoor concentrations of lower brominated PBDEs that are mainly derived from the technical penta- and octa-BDE mixtures were higher than or comparable to the outdoors, while the indoor levels of DecaBDEs and decabromodiphenyl ethane (DBDPE) were apparently lower than the outdoors. The seasonal variations of BFR concentrations indicated that evaporation from old indoor products is the primary source of Penta- and OctaBDEs in the air, whereas most DecaBDEs and DBDPE concentrations showing weak temperature-dependence are largely released from industrial activities. The PBDE congener profiles in the air were generally similar, which were dominated by BDE209, 28, and 47; whereas the appreciable indoor-outdoor differences in the compositions are possibly due to emission sources, photochemical degradation, or congener-specific transport of BFRs in the indoor and outdoor air. Significant correlations between the indoor and outdoor BFRs were observed suggesting the exchange of BFRs between the two compartments, which are more noticeable for PentaBDEs and DecaBDEs with strong indoor and outdoor emission sources, respectively. This study provides significant insights into the sources of BFRs in urban air in China. PMID:26952274

  4. Exposure to Brominated Trihalomethanes in Water During Pregnancy and Micronuclei Frequency in Maternal and Cord Blood Lymphocytes

    Science.gov (United States)

    Pedersen, Marie; Patelarou, Evridiki; Decordier, Ilse; Vande Loock, Kim; Chatzi, Leda; Espinosa, Ana; Fthenou, Eleni; Nieuwenhuijsen, Mark J.; Gracia-Lavedan, Esther; Stephanou, Euripides G.; Kirsch-Volders, Micheline; Kogevinas, Manolis

    2013-01-01

    Background: Water disinfection by-products have been associated with an increased cancer risk. Micronuclei (MN) frequency in lymphocytes is a marker of genomic damage and can predict adult cancer risk. Objective: We evaluated maternal exposure to drinking water brominated trihalomethanes (BTHM) in relation to MN frequency in maternal and cord blood lymphocytes. Methods: MN frequency was examined in 214 mothers and 223 newborns from the Rhea mother–child cohort in Crete, Greece, in 2007–2008. Residential BTHM water concentrations were estimated during pregnancy using tap water analyses and modeling. Questionnaires on water related habits were used to estimate BTHM exposure from all routes. Associations between BTHM and MN frequency were estimated using negative binomial regression. Results: BTHM concentrations in residential tap water during pregnancy ranged from 0.06 to 7.1 μg/L. MN frequency in maternal binucleated lymphocytes was found to increase with BTHM concentrations in residential water for exposure during the first [rate ratio (RR) for 1 μg/L = 1.05; 95% CI: 1.00, 1.11] and second trimesters (RR for 1 μg/L = 1.03; 95% CI: 1.00, 1.06), and through all routes of BTHM exposure during the first trimester (RR for 1 μg/week = 3.14; 95% CI: 1.16, 8.50). Conclusions: These findings suggest that exposure to BTHM may increase the frequency of MN in maternal binucleated lymphocytes. Citation: Stayner LT, Pedersen M, Patelarou E, Decordier I, Vande Loock K, Chatzi L, Espinosa A, Fthenou E, Nieuwenhuijsen MJ, Gracia-Lavedan E, Stephanou EG, Kirsch-Volders M, Kogevinas M. 2014. Exposure to brominated trihalomethanes in water during pregnancy and micronuclei frequency in maternal and cord blood lymphocytes. Environ Health Perspect 122:100–106; http://dx.doi.org/10.1289/ehp.1206434 PMID:24184846

  5. Levels of brominated flame retardants and other pesistent organic pollutants in breast milk samples from Limpopo province, South Africa

    Energy Technology Data Exchange (ETDEWEB)

    Darnerud, Per Ola, E-mail: poda@slv.se [Toxicology Division, National Food Administration, P.O. Box 622, SE-751 26 Uppsala (Sweden); Aune, Marie; Larsson, Lotta [Chemistry Division 2, National Food Administration, P.O. Box 622, SE-751 26 Uppsala (Sweden); Lignell, Sanna [Toxicology Division, National Food Administration, P.O. Box 622, SE-751 26 Uppsala (Sweden); Mutshatshi, Tshinanne; Okonkwo, Jonathan; Botha, Ben [Faculty of Science, Tshwane University of Technology, Pretoria (South Africa); Agyei, Nana [Department of Chemistry, Limpopo University, Medunsa (South Africa)

    2011-09-01

    The non-occupational exposure to brominated flame retardants, and other persistent organic pollutants (POPs) was studied by collecting human breast milk samples from mothers residing in Thohoyandou area, a rural district in the Limpopo Province, northern part of South Africa (SA). Of all collected samples to be analysed (n = 28), those with large enough milk volumes, (n = 14) were quantified for polybrominated diphenyl ethers (PBDEs) (9 congeners: BDE-28, 47, 66, 99, 100, 138, 153, 154, and 183) and hexabromocyclododecane (HBCD) on a GC equipped with dual capillary columns and dual electron-capture detectors (ECD). The levels of PBDE congeners (median sumBDE 1.3 ng/g of lipids) and of HBCD were not far from levels generally found in European studies, and this study may be the first report on the presence of PBDEs and HBCD in SA breast milk. On a congener basis, the finding of comparably high BDE-183 levels suggests a specific PBDE usage, or contamination situation in SA. Apart from BFRs, the high DDT levels found in the breast milk from this area (median and maximum sumDDT levels of about 4 600 and over 20 000 ng/g of lipids, respectively; n = 28) have earlier been reported. In addition, other POPs (PCBs, HCB and HCHs) were found in SA breast milk, at relatively low levels. To conclude, measurable levels of PBDEs and HBCD, and a specific BDE congener pattern, were found in breast milk from the Limpopo province, SA. A number of other POPs, including DDTs in high levels, were also present. - Highlights: {yields} Persistent organic pollutants (POPs) were analysed in South African breast milk. {yields} Focus of interest were brominated flame retardants (BRFs). {yields} Sampling area was the rural Limpopo Province, northern SA. {yields} Probably the first reported African data on BFRs (PBDEs, HBCD) in breast milk. {yields} Reported BFR data similar to European levels.

  6. Comparison of fluorine-18 and bromine-76 imaging in positron emission tomography

    Energy Technology Data Exchange (ETDEWEB)

    Ribeiro, M.J.; Ferreira, N. [Service Hospitalier Frederic Joliot, CEA, Orsay (France)]|[Servico de Biofisica - IBILI - FMC, Coimbra (Portugal); Almeida, P.; Strul, D.; Loc`h, C.; Brulon, V.; Trebossen, R.; Maziere, B.; Bendriem, B. [Service Hospitalier Frederic Joliot, CEA, Orsay (France)

    1999-07-01

    State of the art positron emission tomography (PET) systems allow for scatter and attenuation correction. However, the size of the structure being studied and the region of interest (ROI) chosen also influence the accuracy of measurements of radioactive concentration. Furthermore, the limited spatial resolution of PET tomographs, which depends, among other factors, on the range of positrons in matter, can also contribute to a loss in quantitation accuracy. In this paper we address the influence of positron range, structure size and ROI size on the quantitation of radioactive concentration using PET. ECAT EXACT HR+ (HR+) and ECAT 953B/31 (ECAT 953B) PET systems were used in phantom acquisitions performed with two radioisotopes with different positron ranges. The 3D Hoffman phantom was scanned on both scanners with both radioisotopes, to visually analyse the image quality. A resolution phantom having six spheres of different diameters in a Plexiglas cylinder was used to calculate the values of the contrast recovery coefficient or hot spot recovery coefficient and of the spill-over or cold spot recovery coefficient under different imaging conditions used in clinical routine at our institution. Activity ratios were varied between 2 and 30 or between 0.4 and 200 by filling the spheres with fluorine-18 or bromine-76 respectively and the cylinder with {sup 11}C. Dynamic scans were performed on each scanner. Data were reconstructed using the same parameters as are used in clinical protocols. The variations in sphere and cylinder activities with time were fitted using the function M(t)=k{sub 1}.A(t)+k{sub 2}.B(t), where M(t) is the radioactivity concentration measured in an ROI placed on each sphere and A(t) and B(t) represent the true radioactivity concentrations present at time t in the spheres and in the cylinder respectively. k{sub 1} and k{sub 2} are factors representing the contrast recovery coefficient and the spill-over from surrounding activity on measurements

  7. Modeling and experimental studies to optimize the performance of a hydrogen - bromine fuel cell

    Science.gov (United States)

    Yarlagadda, Venkata Raviteja

    The regenerative Hydrogen-Bromine (H2-Br 2) fuel cells are considered to be one of the viable systems for large scale energy storage because of their high energy conversion efficiency, flexible operation, highly reversible reactions and low capital cost. The preliminary performance of a H2-Br2 fuel cell using both conventional as well as novel materials (Nafion and electrospun composite membranes along with platinum and rhodium sulfide electrocatalysts) was discussed. A maximum power density of 0.65 W/cm2 was obtained with a thicker Br 2 electrode (780 mum) and cell temperature of 45°C. The active area and wetting characteristics of Br2 electrodes were improved upon by either pre-treating with HBr or boiling them in de-ionized water. On the other hand, similar or better performances were obtained using dual fiber electrospun composite membranes (maximum power densities of 0.61 W/cm2 and 0.45 W/cm2 obtained with 25 mum and 65 mum electrospun membranes at 45°C) versus using Nafion membranes (maximum power densities of 0.52 W/cm 2 and 0.41 W/cm2 obtained with Nafion 212 and Nafion 115 membranes at 45°C). The rhodium sulfide (RhxSy) electrocatalyst proved to be more stable in the presence of HBr/Br2 than pure Pt. However, the H2 oxidation activity on RhxS y was quite low compared to that of Pt. In conclusion, a stable H 2 electrocatalyst that can match the hydrogen oxidation activity obtained with Pt and a membrane with low Br2/Br- permeability are essential to prolong the lifetime of a H2-Br2 fuel cell. A 1D mathematical model was developed to serve as a theoretical guiding tool for the experimental studies. The impact of convective and diffusive transport and kinetic rate on the performance of a H2-Br2 fuel cell is shown in this study. Of the two flow designs (flow-by and flow-through) incorporated in this study, the flow-through design demonstrated better performance, which can be attributed to the dominant convective transport inside the porous electrode. Both

  8. Functionalization of anthracene: A selective route to brominated 1,4-anthraquinones

    OpenAIRE

    Kiymet Berkil Akar; Osman Cakmak; Orhan Büyükgüngör; Ertan Sahin

    2011-01-01

    Efficient and stereoselective syntheses are described for the preparation of 2,3,9,10-tetrabromo-1,4-dimethoxy-1,2,3,4-tetrahydroanthracenes 7, 8 and the corresponding 1,4-diol 17 by silver ion-assisted solvolysis of hexabromotetrahydroanthracene 6. Base-promoted aromatization of 7 and 8 afforded synthetically valuable tribromo-1-methoxyanthracenes 10 and 11. The reaction of 17 with sodium methoxide generated tribromodihydroanthracene-1,4-diol 27, whose oxidation with PCC gave 2,9,10-tribromo...

  9. ION VATAMANU

    Directory of Open Access Journals (Sweden)

    l. Povar

    2012-12-01

    Full Text Available Ion Vatamanu was a chemist, writer and public figure. He was equally passionate about both his chosen fields of activity: chemistry and poetry. Chemistry, with its perfect equilibrium of logic and precision, provided inspiration for lyrical creativity, whereas poetry writing enlivened his imagination and passion for chemistry. He loved his parents. He adored his wife Elena, whom he often gifted a sea of flowers. He loved his daughters Mihaela, Mariana, and Leontina. He loved life, and he loved people.

  10. Preparation of radiopharmaceuticals labelled with bromine positron emitting isotopes for the study of dopaminergic receptors of the central nervous system using positron emission tomography

    International Nuclear Information System (INIS)

    The in vivo study of dopaminergic receptors of the central nervous system using positron emission tomography requires the preparation of radiopharmaceuticals labelled with β+ emitting isotopes. The chemical and pharmacological properties of these ligands are evaluated. Cyclotron produced 75 and 76 bromine β+ emitting isotopes are incorporated into dopaminergic ligands by electrophilic substitution using peracetic acid in a no-carrier added form. Purity, lipophilicity and specific activity are analyzed. Pharmacological criteria (specificity, saturability, displacement, localization) required for ligand-receptor binding studies are evaluated in vitro on striatal membranes and in vivo in the rat. Positron emission tomographic studies show that the study of dopaminergic D2 receptors is possible using 75 and 76 bromine labelled bromospiperone and bromolisuride. These ligands are used in physiological and pharmacological studies of the central nervous system

  11. Standard test method for determination of bromine and chlorine in UF6 and uranyl nitrate by X-Ray fluorescence (XRF) spectroscopy

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2001-01-01

    1.1 This method covers the determination of bromine (Br) and chlorine (Cl) in uranium hexafluoride (UF6) and uranyl nitrate solution. The method as written covers the determination of bromine in UF6 over the concentration range of 0.2 to 8 μg/g, uranium basis. The chlorine in UF6 can be determined over the range of 4 to 160 μg/g, uranium basis. Higher concentrations may be covered by appropriate dilutions. The detection limit for Br is 0.2 μg/g uranium basis and for Cl is 4 μg/g uranium basis. 1.2 This standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  12. Synthesis and antimicrobial evaluation of some novel 2-imino-3-(4′-carboxamido pyridyl)-5-arylidene-4-thiazolidinones and their brominated derivatives

    OpenAIRE

    Mishra P; Lukose T; Kashaw S

    2007-01-01

    Various novel 2-Imino-3-(4′-carboxamidopyridyl)-5-arylidene-4-thiazolidinones, structurally related to isonicotinic acid hydrazide (isoniazid) were synthesized and evaluated for their antimicrobial and antifungal activities together with their brominated products. Structure of the synthesized compounds was confirmed by means of their IR, 1 H-NMR spectral data and elemental analysis. Investigation of antimicrobial and antifungal activities of compounds was done by liquid dilution metho...

  13. What’s in the Pool? A Comprehensive Identification of Disinfection By-Products and Assessment of Mutagenicity of Chlorinated and Brominated Swimming Pool Water

    OpenAIRE

    Richardson, S.D.; Demarini, D.M.; Kogevinas, M; Fernandez, P.; Marco, E.; Lourencetti, C.; Balleste, C.; Heederik, D; Meliefste, K.; McKague, A.B.; Marcos, R.; Font-Ribera, L.; J.O. Grimalt; Villanueva, C M

    2010-01-01

    BACKGROUND: Swimming pool disinfectants and disinfection by-products (DBPs) have been linked to human health effects, including asthma and bladder cancer, but no studies have provided a comprehensive identification of DBPs in the water and related that to mutagenicity. OBJECTIVES: We performed a comprehensive identification of DBPs and disinfectant species in waters from public swimming pools in Barcelona, Catalonia, Spain, that disinfect with either chlorine or bromine, and we determined the...

  14. Analysis of brominated and phosphate-based flame retardants in polymer samples by HPLC-UV/MS and online-GPC-HPLC-UV

    Energy Technology Data Exchange (ETDEWEB)

    Schlummer, M.; Brandl, F. [Fraunhofer-Institut fuer Verfahrenstechnik und Verpackung (IVV), Freising (Germany); Maeurer, A.

    2004-09-15

    Here we present two analytical approaches for the identification and quantification of brominated and phosphate-based flame retardants. The first is an HPLC-UV/MS approach, which allows the separation and unequivocal identification and quantification of at least 15 different technical flame retardants. The second approach was set-up as a screening tool, consisting of a GPC separation coupled to an HPLC-UV device.

  15. Recent Development on Environmental Geochemistry of Bromine in Atmosphere%大气中溴的环境地球化学研究进展

    Institute of Scientific and Technical Information of China (English)

    彭炳先; 吴代赦; 李萍

    2011-01-01

    溴是大气平流层和对流层中的重要物种,能参与大气中的多种化学过程,对臭氧的损耗影响很大,同时也干扰大气的硫循环和汞循环,在大气化学中起着十分重要的作用.综述了近年来大气对流层和平流层溴的种类和含量、自然来源和人为来源,以及化学性质,并重点总结了活性溴物种BrO在大气中的存在情况及其在臭氧损耗中的作用.最后,提出了目前大气研究的不足之处和尚待深入开展研究的一些重要科学问题.%Bromine species are important components in troposphere and stratosphere, which can participate in many atmospheric chemical processes, play important role in the ozone depletion, and affect sulfur and mercury cycle of atmosphere. This paper provides an up-to-date overview of global bromine emissions from natural and anthropogenic sources, summarizes the level, species and chemistry of bromine in troposphere and stratosphere, and especially reviews the presence and important role of BrO of reactive bromine species in the ozone depletion. Finally,the shortcomings in current atmospheric research and prospect of main scientific problems are put forward.

  16. Coupled evolution of BrOx-ClOx-HOx-NOx chemistry during bromine-catalyzed ozone depletion events in the arctic boundary layer

    OpenAIRE

    M. J. Evans; Jacob, Daniel James; Atlas, E.; Cantrell, C; Eisele, F.; Flocke, F.; Fried, A.; Mauldin, R; Ridley, B.; Wert, B; Talbot, R.; Blake, D.; B. Heikes; Snow, J.; Walega, J

    2003-01-01

    Extensive chemical characterization of ozone (O3) depletion events in the Arctic boundary layer during the TOPSE aircraft mission in March–May 2000 enables analysis of the coupled chemical evolution of bromine (BrOx), chlorine (ClOx), hydrogen oxide (HOx) and nitrogen oxide (NOx) radicals during these events. We project the TOPSE observations onto an O3 chemical coordinate to construct a chronology of radical chemistry during O3 depletion events, and we compare this chronology to results from...

  17. An X-ray photoelectron spectroscopy study of surface changes on brominated and sulfur-treated activated carbon sorbents during mercury capture: performance of pellet versus fiber sorbents.

    Science.gov (United States)

    Saha, Arindom; Abram, David N; Kuhl, Kendra P; Paradis, Jennifer; Crawford, Jenni L; Sasmaz, Erdem; Chang, Ramsay; Jaramillo, Thomas F; Wilcox, Jennifer

    2013-12-01

    This work explores surface changes and the Hg capture performance of brominated activated carbon (AC) pellets, sulfur-treated AC pellets, and sulfur-treated AC fibers upon exposure to simulated Powder River Basin-fired flue gas. Hg breakthrough curves yielded specific Hg capture amounts by means of the breakthrough shapes and times for the three samples. The brominated AC pellets showed a sharp breakthrough after 170-180 h and a capacity of 585 μg of Hg/g, the sulfur-treated AC pellets exhibited a gradual breakthrough after 80-90 h and a capacity of 661 μg of Hg/g, and the sulfur-treated AC fibers showed no breakthrough even after 1400 h, exhibiting a capacity of >9700 μg of Hg/g. X-ray photoelectron spectroscopy was used to analyze sorbent surfaces before and after testing to show important changes in quantification and oxidation states of surface Br, N, and S after exposure to the simulated flue gas. For the brominated and sulfur-treated AC pellet samples, the amount of surface-bound Br and reduced sulfur groups decreased upon Hg capture testing, while the level of weaker Hg-binding surface S(VI) and N species (perhaps as NH4(+)) increased significantly. A high initial concentration of strong Hg-binding reduced sulfur groups on the surface of the sulfur-treated AC fiber is likely responsible for this sorbent's minimal accumulation of S(VI) species during exposure to the simulated flue gas and is linked to its superior Hg capture performance compared to that of the brominated and sulfur-treated AC pellet samples.

  18. Ion Beam Extraction by Discrete Ion Focusing

    DEFF Research Database (Denmark)

    2010-01-01

    An apparatus (900) and methods are disclosed for ion beam extraction. In an implementation, the apparatus includes a plasma source (or plasma) (802) and an ion extractor (804). The plasma source is adapted to generate ions and the ion extractor is immersed in the plasma source to extract a fraction...... of the generated ions. The ion extractor is surrounded by a space charge (810) formed at least in part by the extracted ions. The ion extractor includes a biased electrode (806) forming an interface with an insulator (808). The interface is customized to form a strongly curved potential distribution (812......) in the space-charge surrounding the ion extractor. The strongly curved potential distribution focuses the extracted ions towards an opening (814) on a surface of the biased electrode thereby resulting in an ion beam....

  19. Instrumentation: Ion Chromatography.

    Science.gov (United States)

    Fritz, James S.

    1987-01-01

    Discusses the importance of ion chromatography in separating and measuring anions. The principles of ion exchange are presented, along with some applications of ion chromatography in industry. Ion chromatography systems are described, as well as ion pair and ion exclusion chromatography, column packings, detectors, and programming. (TW)

  20. Bromine Explosions In Smog Chamber Experiments: A comparison of Cavity-Enhanced (CE) and White-cell DOAS

    Science.gov (United States)

    Buxmann, J.; Hoch, D. J.; Sihler, H.; Pöhler, D.; Platt, U.; Bleicher, S.; Balzer, N.; Zetzsch, C.

    2011-12-01

    Reactive halogen species (RHS), such as Cl, Br or BrO, can significantly influence chemical processes in the troposphere, including the destruction of ozone, change in the chemical balance of hydrogen radicals (OH, HO2), increased deposition of toxic compounds (like mercury) with potential consequences for the global climate. Previous studies have shown that salt lakes can be significant sources for gaseous RHS. Environmental conditions such as salt composition, relative humidity (RH), pH, and temperature (T) can strongly influence reactive bromine levels, but are difficult to quantify in the field. Therefore, we conducted laboratory experiments by exposing NaCl salt containing 0.33% (by weight) NaBr to simulated sunlight in a Teflon smog-chamber under various conditions of RH and ozone concentrations. BrO levels were observed by a Differential-Optical-Absorption-Spectrometer (DOAS) in combination with a multi-reflection cell (White-cell). The concentrations of OH- and Cl- radicals were quantified by the radical clock method. We present the first direct observation of BrO from the "Bromine Explosion" (auto catalytic release of reactive bromine from salt surfaces - key to ozone destruction) in the laboratory above a simulated salt pan. The maximum BrO mixing ratio of 6419±71 ppt at 60% RH was observed to be one order of magnitude higher than at 37% RH and 2% RH. The release of RHS from the salt pan is possibly controlled by the thickness of the quasi liquid layer, covering the reactive surface of the halide crystals, as the layer thickness strongly depends on RH. Furthermore, a new cavity enhanced DOAS (CE-DOAS) instrument was designed and successfully used in chamber experiments. For the first time, such an instrument uses a spectral interval in the UV - wavelength range (325-365 nm) to identify BrO. We show a comparison of the CE-DOAS and White-cell DOAS instrument in a series of experiments, where e.g. a peak BrO mixing ratio up to 380 ppt within the first

  1. Emissions of brominated flame retardants in Asia: consideration of its potential risk form the view point of the Norwegian regulation

    Science.gov (United States)

    Kikuchi, Ryunosuke; Gerardo, Romeu; Gorbacheva, Tamara

    2010-05-01

    Flame retardants can be divided into two broad categories: additive or reactive, which can be further more divided into brominated or non-brominated sub-categories. These retardants are found in many commercial products such as computers, television sets, furniture, carpets, etc. They are of environmental concern due to their persistence, potential for bioaccumulation and widespread distribution via atmospheric transport, and possible adverse effects in wildlife and humans. Tetrabromobisphenol-A (TBBPA) is mainly used in electrical and electronic appliances (circuit board in particular), and the application of TBBPA accounts for about two thirds of the global production of brominated flame retardant (BFR). The European Union Risk Assessment does not support the restriction of TBBPA: i.e. no risk is identified for the reactive use of TBBPA such as in epoxy resin used in circuit boards. By contrast, in 2007 Norway notified the World Trade Organization of its intention to prohibit 18 substances from consumer goods (Notification No. 2007/9016/N), called the Prohibition on Certain Hazardous Substances in Consumer Products (PoHS). TBBPA is listed in this prohibition list. Marine conservation is recognized as a key issue in Norwegian fishery management e.g. wastewater management in the framework of the North Sea Declarations. TBBPA is very water-soluble, and dimethyl-TBBPA is lipophilic and may accumulate in fat. TBBPA is not readily biodegradable and can have long-term effects in the aquatic environment. Norwegian examples are summarized: TBBPA was found in marine sediment samples from Tromsø harbor (northern Norway) and in Atlantic cod from Lofoten and Varanger; TBBPA has been detected in Norwegian peregrine falcon and golden eagle eggs; and TBBPA has been detected in the blood in the general population of Norway. From these viewpoints, it can be considered that Norway needs to strictly control TBBPA emissions. In recent times, Asia has emerged as one of the leading

  2. Bromine Resource in Brines and Its Exploitation Prospect%我国卤水溴资源及其开发前景展望

    Institute of Scientific and Technical Information of China (English)

    乌志明; 温现明

    2000-01-01

    溴在自然界无独立的矿物,呈强分散性稀有元素,散布在地壳水圈里,以油气田地下卤水、盐湖卤水、矿场盐卤水含溴浓度相对较高。溴在国民经济的用途广泛,是我国紧缺物资,产不敷消。而我国卤水溴资源分布广泛,类型齐全,同时常伴有K、B、I、Li等多种有用组分。充分发挥各类卤水溴资源特点,提高卤水溴资源综合利用水平,其开发前景广阔。%Bromine is a scarce element with no isolated mineral form in nature, with is distributed in the hydrosphere. Its content is relatively high in gas field and underground waters,Salt Lake Brines and waters etc. Bromine is widely used in the national economy and its supply can not meet the demand. However, it is extensively distributed in brine resources of our country and coexists with various useful resources like K,B,I,Li,etc. Comprehensive utilization of bromine resources according to the specific characters of various brines can provide us a brighter prospect.

  3. Predictive models for water sources with high susceptibility for bromine-containing disinfection by-product formation: implications for water treatment.

    Science.gov (United States)

    Watson, Kalinda; Farré, Maria José; Birt, James; McGree, James; Knight, Nicole

    2015-02-01

    This study examines a matrix of synthetic water samples designed to include conditions that favour brominated disinfection by-product (Br-DBP) formation, in order to provide predictive models suitable for high Br-DBP forming waters such as salinity-impacted waters. Br-DBPs are known to be more toxic than their chlorinated analogues, in general, and their formation may be favoured by routine water treatment practices such as coagulation/flocculation under specific conditions; therefore, circumstances surrounding their formation must be understood. The chosen factors were bromide concentration, mineral alkalinity, bromide to dissolved organic carbon (Br/DOC) ratio and Suwannee River natural organic matter concentration. The relationships between these parameters and DBP formation were evaluated by response surface modelling of data generated using a face-centred central composite experimental design. Predictive models for ten brominated and/or chlorinated DBPs are presented, as well as models for total trihalomethanes (tTHMs) and total dihaloacetonitriles (tDHANs), and bromide substitution factors for the THMs and DHANs classes. The relationships described revealed that increasing alkalinity and increasing Br/DOC ratio were associated with increasing bromination of THMs and DHANs, suggesting that DOC lowering treatment methods that do not also remove bromide such as enhanced coagulation may create optimal conditions for Br-DBP formation in waters in which bromide is present. PMID:25163557

  4. Broad-spectrum antimicrobial photocatalysis mediated by titanium dioxide and UVA is potentiated by addition of bromide ion via formation of hypobromite.

    Science.gov (United States)

    Wu, Ximing; Huang, Ying-Ying; Kushida, Yu; Bhayana, Brijesh; Hamblin, Michael R

    2016-06-01

    Antimicrobial photocatalysis involves the UVA excitation of titanium dioxide (TiO2) nanoparticles (particularly the anatase form) to produce reactive oxygen species (ROS) that kill microbial cells. For the first time we report that the addition of sodium bromide to photoactivated TiO2 (P25) potentiates the killing of Gram-positive, Gram-negative bacteria and fungi by up to three logs. The potentiation increased with increasing bromide concentration in the range of 0-10mM. The mechanism of potentiation is probably due to generation of both short and long-lived oxidized bromine species including hypobromite as shown by the following observations. There is some antimicrobial activity remaining in solution after switching off the light, that lasts for 30min but not 2h, and oxidizes 3,3',5,5'-tetramethylbenzidine. N-acetyl tyrosine ethyl ester was brominated in a light dose-dependent manner, however no bromine or tribromide ion could be detected by spectrophotometry or LC-MS. The mechanism appears to have elements in common with the antimicrobial system (myeloperoxidase+hydrogen peroxide+bromide). PMID:27012419

  5. Broad-spectrum antimicrobial photocatalysis mediated by titanium dioxide and UVA is potentiated by addition of bromide ion via formation of hypobromite.

    Science.gov (United States)

    Wu, Ximing; Huang, Ying-Ying; Kushida, Yu; Bhayana, Brijesh; Hamblin, Michael R

    2016-06-01

    Antimicrobial photocatalysis involves the UVA excitation of titanium dioxide (TiO2) nanoparticles (particularly the anatase form) to produce reactive oxygen species (ROS) that kill microbial cells. For the first time we report that the addition of sodium bromide to photoactivated TiO2 (P25) potentiates the killing of Gram-positive, Gram-negative bacteria and fungi by up to three logs. The potentiation increased with increasing bromide concentration in the range of 0-10mM. The mechanism of potentiation is probably due to generation of both short and long-lived oxidized bromine species including hypobromite as shown by the following observations. There is some antimicrobial activity remaining in solution after switching off the light, that lasts for 30min but not 2h, and oxidizes 3,3',5,5'-tetramethylbenzidine. N-acetyl tyrosine ethyl ester was brominated in a light dose-dependent manner, however no bromine or tribromide ion could be detected by spectrophotometry or LC-MS. The mechanism appears to have elements in common with the antimicrobial system (myeloperoxidase+hydrogen peroxide+bromide).

  6. Experimental and theoretical analysis of the kinetics of the reaction of atomic bromine with 1,4-dioxane.

    Science.gov (United States)

    Giri, Binod Raj; Roscoe, John M; González-García, Núria; Olzmann, Matthias

    2010-01-14

    The rate coefficient for the reaction of atomic bromine with 1,4-dioxane was measured from approximately 300 to 340 K using the relative rate method. Iso-octane and iso-butane were used as reference compounds, and the experiments were made in a bath of argon containing up to 210 Torr of O(2) at total pressures between 200 and 820 Torr. The rate coefficients were not affected by changes in pressure or O(2) concentration over our range of experimental conditions. The ratios of rate coefficients for the reaction of dioxane relative to the reference compound were put on an absolute basis by using the published absolute rate coefficients for the reference reactions. The variation of the experimentally determined rate coefficients with temperature for the reaction of Br with 1,4-dioxane can be given by k(1)(exp)(T) = (1.4 +/- 1.0) x 10(-11)exp[-23.0 +/- 1.8) kJ mol(-1)/(RT)] cm(3) molecule(-1) s(-1). We rationalized our experimental results in terms of transition state theory with molecular data from quantum chemical calculations. Molecular geometries and frequencies were obtained from MP2/aug-cc-pVDZ calculations, and single-point energies of the stationary points were obtained at CCSD(T)/CBS level of theory. The calculations indicate that the 1,4-dioxane + Br reaction proceeds in an overall endothermic addition-elimination mechanism via a number of intermediates. The rate-determining step is a chair-to-boat conformational change of the Br-dioxane adduct. The calculated rate coefficients, given by k(1)(calc)(T) = 5.6 x 10(-11)exp[-26.6 kJ mol(-1)/(RT)] cm(3) molecule(-1) s(-1), are in very good agreement with the experimental values. Comparison with results reported for the reactions of Br with other ethers suggests that this multistep mechanism differs significantly from that for abstraction of hydrogen from other ethers by atomic bromine. PMID:19848396

  7. ION GUN

    Science.gov (United States)

    Dandl, R.A.

    1961-10-24

    An ion gun is described for the production of an electrically neutral ionized plasma. The ion gun comprises an anode and a cathode mounted in concentric relationship with a narrow annulus between. The facing surfaces of the rear portions of the anode and cathode are recessed to form an annular manifold. Positioned within this manifold is an annular intermediate electrode aligned with the an nulus between the anode and cathode. Gas is fed to the manifold and an arc discharge is established between the anode and cathode. The gas is then withdrawn from the manifold through the annulus between the anode and cathode by a pressure differential. The gas is then ionized by the arc discharge across the annulus. The ionized gas is withdrawn from the annulus by the combined effects of the pressure differential and a collimating magnetic field. In a 3000 gauss magnetic field, an arc voltage of 1800 volts, and an arc current of 0.2 amp, a plasma of about 3 x 10/sup 11/ particles/cc is obtained. (AEC)

  8. Brominated flame retardants and perfluorinated chemicals, two groups of persistent contaminants in Belgian human blood and milk

    Energy Technology Data Exchange (ETDEWEB)

    Roosens, Laurence [Toxicological Centre, Department of Pharmaceutical Sciences, University of Antwerp, Universiteitsplein 1, 2610 Wilrijk (Belgium); D' Hollander, Wendy; Bervoets, Lieven [Laboratory for Ecophysiology, Biochemistry and Toxicology, Department of Biology, University of Antwerp, Groenenborgerlaan 171, 2020 Antwerp (Belgium); Reynders, Hans; Van Campenhout, Karen [Environment and Health Unit, Department of Environment, Nature and Energy, Flemish Government - Koning Albert II-laan 20, Bus 8, 1000 Brussels (Belgium); Cornelis, Christa; Van Den Heuvel, Rosette; Koppen, Gudrun [Unit Environmental Risk and Health, Flemish Institute of Technological Research (VITO), Boeretang 200, 2400 Mol (Belgium); Covaci, Adrian, E-mail: adrian.covaci@ua.ac.b [Toxicological Centre, Department of Pharmaceutical Sciences, University of Antwerp, Universiteitsplein 1, 2610 Wilrijk (Belgium); Laboratory for Ecophysiology, Biochemistry and Toxicology, Department of Biology, University of Antwerp, Groenenborgerlaan 171, 2020 Antwerp (Belgium)

    2010-08-15

    We assessed the exposure of the Flemish population to brominated flame retardants (BFRs) and perfluorinated compounds (PFCs) by analysis of pooled cord blood, adolescent and adult serum, and human milk. Levels of polybrominated diphenyl ethers (PBDEs) in blood (range 1.6-6.5 ng/g lipid weight, lw) and milk (range 2.0-6.4 ng/g lw) agreed with European data. Hexabromocyclododecane ranged between <2.1-5.7 ng/g lw in milk. Perfluorooctane sulfonic acid (PFOS) and perfluorooctanoic acid (PFOA) dominated in blood and ranged between 1 and 171 ng/mL and <0.9-9.5 ng/mL, respectively. Total PFC levels in milk ranged between <0.5-29 ng/mL. A significant increase in PBDE concentrations was detected from newborns (median 2.1) to the adolescents and adults (medians 3.8 and 4.6 ng/g lw, respectively). An identical trend was observed for PFOS, but not for PFOA. We estimated that newborn exposure to BFRs and PFCs occurs predominantly post-natally, whereas placental transfer has a minor impact on the body burden. - The exposure to BFRs and PFCs of general Flemish population has been assessed throughout several age groups.

  9. Brominated and organophosphate flame retardants in indoor dust of Jeddah, Kingdom of Saudi Arabia: Implications for human exposure.

    Science.gov (United States)

    Ali, Nadeem; Eqani, Syed Ali Musstjab Akber Shah; Ismail, Iqbal Mohammad Ibrahim; Malarvannan, Govindan; Kadi, Mohammad W; Albar, Hussain Mohammed Salem; Rehan, Mohammad; Covaci, Adrian

    2016-11-01

    Different flame retardants (FRs) namely polybrominated diphenyl ethers (PBDEs), emerging brominated/chlorinated flame retardants (Br/Cl FRs), and organophosphate FRs (OPFRs) were analyzed in cars, air conditioner (AC) filters and floor dust of different households from Jeddah, Kingdom of Saudi Arabia (KSA). To the best of our knowledge, this is first study in literature reporting emerging Br/Cl FRs and OPFRs in AC filter dust and also first to report on their occurrence in dust from KSA. Chlorinated alkyl phosphate, penta-BDEs, BDE-209, and decabromodiphenylethane (DBDPE) were the major chemicals in dust samples from all microenvironments. ΣOPFRs occurred at median concentrations (ng/g dust) of 15,400, 10,500, and 3750 in AC filter, car and house floor dust, respectively. For all analyzed chemicals, relatively lower levels were observed in floor dust than car and AC filter dust. The profiles of FRs in car dust were different from AC filter and floor dust, which reflected their wider application as FR and plasticizer in variety of household and commercial products. For toddlers, assuming high dust intake and 95th percentile concentrations, the computed exposure estimation for BDE-99 was higher than RfD values. PMID:27343946

  10. Brominated flame retardants (BFRs) in breast milk and associated health risks to nursing infants in Northern Tanzania.

    Science.gov (United States)

    Müller, M H B; Polder, A; Brynildsrud, O B; Lie, E; Løken, K B; Manyilizu, W B; Mdegela, R H; Mokiti, F; Murtadha, M; Nonga, H E; Skaare, J U; Lyche, J L

    2016-01-01

    The main aim of this study was to assess brominated flame retardants (BFRs) in breast milk in the Northern parts of Tanzania. Ninety-five colostrum samples from healthy, primiparous mothers at Mount Meru Regional Referral Hospital (MMRRH), Arusha Tanzania, were analyzed for polybrominated diphenyl ethers (PBDEs), hexabromocyclododecane (HBCD), 1,2-bis(2,4,6-tribromophenoxy) ethane (BTBPE), hexabromobenzene (HBB), (2,3-dibromopropyl) (2,4,6-tribromophenyl) ether (DPTE), pentabromoethylbenzene (PBEB) and 2,3,4,5,6-pentabromotoluene (PBT). The Ʃ7PBDE (BDE 28, 47, 99, 100, 153, 154, 183) ranged from below level of detection (

  11. Evaluation of 3D-human skin equivalents for assessment of human dermal absorption of some brominated flame retardants.

    Science.gov (United States)

    Abdallah, Mohamed Abou-Elwafa; Pawar, Gopal; Harrad, Stuart

    2015-11-01

    Ethical and technical difficulties inherent to studies in human tissues are impeding assessment of the dermal bioavailability of brominated flame retardants (BFRs). This is further complicated by increasing restrictions on the use of animals in toxicity testing, and the uncertainties associated with extrapolating data from animal studies to humans due to inter-species variations. To overcome these difficulties, we evaluate 3D-human skin equivalents (3D-HSE) as a novel in vitro alternative to human and animal testing for assessment of dermal absorption of BFRs. The percutaneous penetration of hexabromocyclododecanes (HBCD) and tetrabromobisphenol-A (TBBP-A) through two commercially available 3D-HSE models was studied and compared to data obtained for human ex vivo skin according to a standard protocol. No statistically significant differences were observed between the results obtained using 3D-HSE and human ex vivo skin at two exposure levels. The absorbed dose was low (less than 7%) and was significantly correlated with log Kow of the tested BFR. Permeability coefficient values showed increasing dermal resistance to the penetration of γ-HBCD>β-HBCD>α-HBCD>TBBPA. The estimated long lag times (>30 min) suggests that frequent hand washing may reduce human exposure to HBCDs and TBBPA via dermal contact. PMID:26232142

  12. Fission and fragmentation of silver and bromine nuclei by 1-6 GeV energy photons

    International Nuclear Information System (INIS)

    Fission and fragmentation of silver and bromine nuclei induced by bremsstrahlung photons in the maximum energy range of 1-6 GeV are studied. A special technique of nuclear emulsion for the highly ionizing nuclear fragment detection is used in the discrimination between nuclear fission and fragmentation events. Films of Ilford-KO nuclear emulsion (approximatelly 1020 atoms/cm2 of Ag, Br) which had been exposed to bremsstrahlung beams in 'Deutsches Elektronen Synchrotron' (DESY, Hamburg) with total doses of approximatelly 1011 equivalent photons are used. Through a detailed analysis of range, angular and angle between fragment distributions, and empirical relations which permit to estimate nuclear fragment energy, range and velocity, the discrimination between fission and fragmentation events is made. Results related to fragment range distribution, angular distribution, distribution of angle between fragments, distribution of ratio between ranges, velocity distributions, forward/backward ratio, fission and fragmentation cross sections, nuclear fissionability and ternary fission frequency are presented and discussed. The results show that the mean photofragmentation cross section in the internal 1-6 GeV (0,09+-0,02mb) is significant when compared to the photofission (0,29+-0,05mb). It is also shown that the mean photofission cross section between 1 and 6 GeV is great by a factor of approximatelly 10 when compared to the foreseen by the cascade-evaporation nuclear model for monoenergetic photons of 0,6 GeV. (L.C.)

  13. Occurrences and inventories of heavy metals and brominated flame retardants in wastes from printed circuit board production.

    Science.gov (United States)

    Zhou, Xiaoyu; Guo, Jie; Zhang, Wei; Zhou, Peng; Deng, Jingjing; Lin, Kuangfei

    2014-09-01

    Pollutants including heavy metals and brominated flame retardant were detected in 10 types of production wastes from a typical printed circuit board manufacturing plant, and their inventories were estimated. Rinsing water from etching process had the highest concentrations of copper (665.51 mg/L), lead (1.02 mg/L), nickel (3.60 mg/L), chromium (0.97 mg/L), and tin (1.79 mg/L). Powdered solid waste (SW) from the cut lamination process contained the highest tetrabromobisphenol-A (TBBPA) levels (49.86 mg/kg). Polybrominated diphenyl ethers (PBDEs) were absent in this plant, in agreement with the international regulations of PBDE phase out. The pollutant inventories in the wastes exhibited in the order of copper > > zinc > tin ≈ nickel > lead > chromium > > TBBPA. The potential environmental impact of pollutants in SW during production and disposal were further investigated. A high partitioning of pollutant concentration between the total suspended particle and SW (-0.10 leaching procedure, drilling powder with the smallest particle diameter still showed high leachabilities of lead and tin which may lead to a negative environmental impact during disposal. PMID:24777328

  14. Critical rate of electrolyte circulation for preventing zinc dendrite formation in a zinc-bromine redox flow battery

    Science.gov (United States)

    Yang, Hyeon Sun; Park, Jong Ho; Ra, Ho Won; Jin, Chang-Soo; Yang, Jung Hoon

    2016-09-01

    In a zinc-bromine redox flow battery, a nonaqueous and dense polybromide phase formed because of bromide oxidation in the positive electrolyte during charging. This formation led to complicated two-phase flow on the electrode surface. The polybromide and aqueous phases led to different kinetics of the Br/Br- redox reaction; poor mixing of the two phases caused uneven redox kinetics on the electrode surface. As the Br/Br- redox reaction was coupled with the zinc deposition reaction, the uneven redox reaction on the positive electrode was accompanied by nonuniform zinc deposition and zinc dendrite formation, which degraded battery stability. A single-flow cell was operated at varying electrolyte circulation rates and current densities. Zinc dendrite formation was observed after cell disassembly following charge-discharge testing. In addition, the flow behavior in the positive compartment was observed by using a transparent version of the cell. At low rate of electrolyte circulation, the polybromide phase clearly separated from the aqueous phase and accumulated at the bottom of the flow frame. In the corresponding area on the negative electrode, a large amount of zinc dendrites was observed after charge-discharge testing. Therefore, a minimum circulation rate should be considered to avoid poor mixing of the positive electrolyte.

  15. Bromine and iodine observation over the tropical Eastern and Western Pacific: impacts on atmospheric ozone and mercury

    Science.gov (United States)

    Dix, Barbara; Volkamer, Rainer; Baidar, Sunil; Koenig, Theodore; Coburn, Sean; Ortega, Ivan; Huey, Greg; Apel, Eric; Carpenter, Lucy; Evans, Mathew; Sherwin, Tomas; Kinnison, Doug; Lamarque, Jean-Francois; Saiz-Lopez, Alfonso; Pierce, Brad; Jacob, Daniel; Schmidt, Johan; Atlas, Elliot; Pan, Laura; Salawitch, Ross

    2015-04-01

    Tropospheric halogens catalytically destroy ozone, modify oxidative capacity, and oxidize atmospheric mercury. About 75% of the global tropospheric O3 loss occurs at tropical latitudes, where O3 radiative forcing is most sensitive to changes in O3. Here we report on BrO and IO observations by the CU Airborne MAX-DOAS instrument aboard the NSF/NCAR GV aircraft during the Tropical Ocean tRoposphere Exchange of Reactive halogen species and Oxygenated VOC (TORERO) and CONvective TRansport of Active Species in the Tropics (CONTRAST) field campaigns. We have measured BrO and IO vertical profiles over the tropical and sub-tropical Western and Eastern Pacific Ocean, including a detection of IO in the UTLS and lower stratosphere. Observed IO abundances are 2-3 times higher in the Southern hemisphere than in the Northern hemisphere free troposphere. Measurements in the lower stratosphere and tropical UTLS provide the first quantification of IO in these layers by limb observations of scattered sunlight. BrO concentrations increase with altitude and are 2-4 times higher than predicted by models. We compare our observations with predictions from the global models CAM-Chem, GEOS-Chem and RAQMS. Our measurements indicate that these halogens are responsible for 34% of the column integrated loss of tropospheric O3. At the observed levels bromine oxidizes mercury at up to 3.5 times faster rates, and at lower altitudes than models predict, which has implications for global mercury distributions and deposition to ecosystem.

  16. Evaluation of 3D-human skin equivalents for assessment of human dermal absorption of some brominated flame retardants.

    Science.gov (United States)

    Abdallah, Mohamed Abou-Elwafa; Pawar, Gopal; Harrad, Stuart

    2015-11-01

    Ethical and technical difficulties inherent to studies in human tissues are impeding assessment of the dermal bioavailability of brominated flame retardants (BFRs). This is further complicated by increasing restrictions on the use of animals in toxicity testing, and the uncertainties associated with extrapolating data from animal studies to humans due to inter-species variations. To overcome these difficulties, we evaluate 3D-human skin equivalents (3D-HSE) as a novel in vitro alternative to human and animal testing for assessment of dermal absorption of BFRs. The percutaneous penetration of hexabromocyclododecanes (HBCD) and tetrabromobisphenol-A (TBBP-A) through two commercially available 3D-HSE models was studied and compared to data obtained for human ex vivo skin according to a standard protocol. No statistically significant differences were observed between the results obtained using 3D-HSE and human ex vivo skin at two exposure levels. The absorbed dose was low (less than 7%) and was significantly correlated with log Kow of the tested BFR. Permeability coefficient values showed increasing dermal resistance to the penetration of γ-HBCD>β-HBCD>α-HBCD>TBBPA. The estimated long lag times (>30 min) suggests that frequent hand washing may reduce human exposure to HBCDs and TBBPA via dermal contact.

  17. Selected chlorobornanes, polychlorinated naphthalenes and brominated flame retardants in Bjørnøya (Bear Island) freshwater biota.

    Science.gov (United States)

    Evenset, Anita; Christensen, Guttorm N; Kallenborn, Roland

    2005-08-01

    Levels of selected sparsely investigated persistent organic pollutants (POPs) have been measured in organisms from two Arctic lakes on Bjørnøya (Bear Island). Elevated levels of chlorobornanes (CHBs) (up to 46.7 ng/g wet weight=ww), polybrominated diphenyl ethers (PBDEs) (up to 27.2 ng/g ww), polybrominated biphenyls (PBBs) (up to 1.1 ng/g ww) and polychlorinated naphthalenes (PCNs, only 4 congeners) (up to 62.7 pg/g ww), were measured in biota from Lake Ellasjøen. In Lake Øyangen, located only 5 km north of Ellasjøen, levels of these contaminants were significantly lower. delta(15)N-values were 7-10 per thousand higher in organisms from Ellasjøen as compared to Øyangen. This is attributed to biological inputs related to seabird activities. The present study illustrates that contaminants such as CHBs, brominated flame retardants and PCNs accumulate in the Ellasjøen food web in a manner similar to PCBs and conventional organochlorine pesticides. Transport mechanisms that control PCB and DDT distributions, i.e. atmospheric long-range transport and biotransport by seabirds, are also relevant for the contaminants investigated in the present study. PMID:15862396

  18. Trophodynamics of hexabromocyclododecanes and several other non-PBDE brominated flame retardants in a freshwater food web.

    Science.gov (United States)

    Wu, Jiang-Ping; Guan, Yun-Tao; Zhang, Ying; Luo, Xiao-Jun; Zhi, Hui; Chen, She-Jun; Mai, Bi-Xian

    2010-07-15

    Several currently used non-polybrominated diphenyl ether (PBDE) brominated flame retardants (BFRs), including hexabromocyclododecanes (HBCDs), 1,2-bis(2,4,6-tribromophenoxy)ethane (BTBPE), decabromodiphenyl ethane (DBDPE), hexabromobenzene (HBB), pentabromoethylbenzene (PBEB), and pentabromotoluene (PBT), are examined in the components of a freshwater food web from an electronic waste recycling site, South China. All these BFRs are detectable in the food web, with average concentrations of 13.9-868, 1.71-518, Food web magnification is observed for (+)-alpha-, (-)-alpha-, (+/-)-alpha-, and total HBCDs, and HBB, with trophic magnification factors (TMFs) of 2.22, 2.18, 2.19, 1.82, and 1.46, respectively; whereas there is trophic dilution of BTBPE and PBT through the food web. The TMFs for (+)-alpha-, (-)-alpha-, and (+/-)-alpha-HBCDs are comparable to those of PBDEs detected previously in the same food web. Biota samples show a shift from gamma- toward alpha-HBCD compared with the suspended particles, sediment, and HBCD technical mixtures, with a significant increase of alpha-HBCD on ascending trophic levels. Except for alpha-HBCD in suspended particles and sediment, all the HBCD enantiomers detected are nonracemic in the environmental matrix. In biota, nonracemic residues of alpha-HBCD were observed in mud carp and crucian carp; beta-HBCD in prawn, mud carp, and crucian carp; and gamma-HBCD in water snake, with preferences for (+)-alpha-, (-)-beta-, and (+)-gamma-HBCDs. PMID:20575536

  19. Batch leaching tests of motherboards to assess environmental contamination by bromine, platinum group elements and other selected heavy metals.

    Science.gov (United States)

    Almeida, César; Grosselli, Melina; González, Patricia; Martínez, Dante; Gil, Raúl

    2016-02-01

    In this study, a batch leaching test was executed to evaluate the toxicity associated with chemicals contained in motherboards. The leaching solutions used were distilled water, nitric acid, acetic acid and synthetic acid rain solution. A total of 21 elements including Ag, As, Au, Br, Cd, Co, Cr, Cu, Hf, Ir, Mn, Ni, Os, Pb, Pd, Pt, Rd, Rh, Se, U and Zn were analyzed. In this study, the pH values of all the leachates fell within the range of 2.33-4.88. The highest concentrations of metals were obtained from the acid rain solution, whilst the maximum value of bromine was achieved with solution of acetic acid. Appreciable concentrations of platinum group elements were detected with concentrations around 3.45, 1.43, 1.21 and 22.19 µg L(-1) for Ir, Pd, Pt and Rh, respectively. The different leaching of the motherboards revealed the predominant presence of the toxic substances in the leached from the e-waste.

  20. The magic triangle goes MAD: experimental phasing with a bromine derivative

    Energy Technology Data Exchange (ETDEWEB)

    Beck, Tobias, E-mail: tbeck@shelx.uni-ac.gwdg.de; Gruene, Tim; Sheldrick, George M. [Department of Structural Chemistry, Georg-August-Universität Göttingen, Tammannstrasse 4, 37077 Göttingen (Germany)

    2010-04-01

    5-Amino-2, 4, 6-tribromoisophthalic acid is used as a phasing tool for protein structure determination by MAD phasing. It is the second representative of a novel class of compounds for heavy-atom derivatization that combine heavy atoms with amino and carboxyl groups for binding to proteins. Experimental phasing is an essential technique for the solution of macromolecular structures. Since many heavy-atom ion soaks suffer from nonspecific binding, a novel class of compounds has been developed that combines heavy atoms with functional groups for binding to proteins. The phasing tool 5-amino-2, 4, 6-tribromoisophthalic acid (B3C) contains three functional groups (two carboxylate groups and one amino group) that interact with proteins via hydrogen bonds. Three Br atoms suitable for anomalous dispersion phasing are arranged in an equilateral triangle and are thus readily identified in the heavy-atom substructure. B3C was incorporated into proteinase K and a multiwavelength anomalous dispersion (MAD) experiment at the Br K edge was successfully carried out. Radiation damage to the bromine–carbon bond was investigated. A comparison with the phasing tool I3C that contains three I atoms for single-wavelength anomalous dispersion (SAD) phasing was also carried out.

  1. Determination of bromine, fluorine and iodine in mineral supplements using pyrohydrolysis for sample preparation

    Energy Technology Data Exchange (ETDEWEB)

    Taflik, Ticiane; Antes, Fabiane G.; Paniz, Jose N.G.; Flores, Erico M.M.; Dressler, Valderi L., E-mail: valdres@quimica.ufsm.br [Departamento de Quimica, Universidade Federal de Santa Maria, RS (Brazil); Duarte, Fabio A. [Escola de Quimica e Alimentos, Universidade Federal do Rio Grande, Rio Grande, RS (Brazil); Flores, Eder L.M. [Coordenacao de Engenharia de Alimentos, Universidade Tecnologica Federal do Parana, Medianeira, PR (Brazil)

    2012-03-15

    Pyrohydrolysis was employed for mineral supplements decomposition prior to F, Br and I determination. Fluoride determination was carried out by potentiometry using a fluoride-ion selective electrode, whereas Br and I were determined by inductively coupled plasma mass spectrometry. The main parameters that influence on pyrohydrolysis were investigated. After evaluation, the following conditions were established: reactor temperature of 1000 deg C during 10 min; sample plus accelerator mass ratio of 1 + 5 and carrier gas (air) flow rate of 200 mL min{sup -1} . The accuracy of the proposed method was evaluated by analyte recovery tests and analysis of certified reference materials of phosphate rock and soil. Commercial mineral supplement samples were analyzed. The limits of quantification were 16, 0.3 and 0.07 {mu}g g{sup -1} for F, Br and I, respectively. By using a relatively simple and low cost pyrohydrolysis system up to 5 samples can be processed per hour. The developed sample preparation procedure can be routinely employed for F, Br and I determination in mineral supplements. (author)

  2. The magic triangle goes MAD: experimental phasing with a bromine derivative

    International Nuclear Information System (INIS)

    5-Amino-2, 4, 6-tribromoisophthalic acid is used as a phasing tool for protein structure determination by MAD phasing. It is the second representative of a novel class of compounds for heavy-atom derivatization that combine heavy atoms with amino and carboxyl groups for binding to proteins. Experimental phasing is an essential technique for the solution of macromolecular structures. Since many heavy-atom ion soaks suffer from nonspecific binding, a novel class of compounds has been developed that combines heavy atoms with functional groups for binding to proteins. The phasing tool 5-amino-2, 4, 6-tribromoisophthalic acid (B3C) contains three functional groups (two carboxylate groups and one amino group) that interact with proteins via hydrogen bonds. Three Br atoms suitable for anomalous dispersion phasing are arranged in an equilateral triangle and are thus readily identified in the heavy-atom substructure. B3C was incorporated into proteinase K and a multiwavelength anomalous dispersion (MAD) experiment at the Br K edge was successfully carried out. Radiation damage to the bromine–carbon bond was investigated. A comparison with the phasing tool I3C that contains three I atoms for single-wavelength anomalous dispersion (SAD) phasing was also carried out

  3. Ion funnel ion trap and process

    Science.gov (United States)

    Belov, Mikhail E [Richland, WA; Ibrahim, Yehia M [Richland, WA; Clowers, Biran H [West Richland, WA; Prior, David C [Hermiston, OR; Smith, Richard D [Richland, WA

    2011-02-15

    An ion funnel trap is described that includes a inlet portion, a trapping portion, and a outlet portion that couples, in normal operation, with an ion funnel. The ion trap operates efficiently at a pressure of .about.1 Torr and provides for: 1) removal of low mass-to-charge (m/z) ion species, 2) ion accumulation efficiency of up to 80%, 3) charge capacity of .about.10,000,000 elementary charges, 4) ion ejection time of 40 to 200 .mu.s, and 5) optimized variable ion accumulation times. Ion accumulation with low concentration peptide mixtures has shown an increase in analyte signal-to-noise ratios (SNR) of a factor of 30, and a greater than 10-fold improvement in SNR for multiply charged analytes.

  4. Effects of halide ions on photodegradation of sulfonamide antibiotics: Formation of halogenated intermediates.

    Science.gov (United States)

    Li, Yingjie; Qiao, Xianliang; Zhang, Ya-Nan; Zhou, Chengzhi; Xie, Huaijun; Chen, Jingwen

    2016-10-01

    The occurrence of sulfonamide antibiotics (SAs) in estuarine waters urges insights into their environmental fate for ecological risk assessment. Although many studies focused on the photochemical behavior of SAs, yet the effects of halide ions relevant to estuarine and marine environments on their photodegradation have been poorly understood. Here, we investigated the effects of halide ions on the photodegradation of SAs with sulfapyridine, sulfamethazine, and sulfamethoxazole as representative compounds. Results showed that halide ions did not significantly impact the photodegradation of sulfapyridine and sulfamethoxazole, while they significantly promoted the photodegradation of sulfamethazine. Further experiments found that ionic strength applied with NaClO4 significantly enhanced the photodegradation of the SAs, which was attributed to the decreased quenching rate constant of the triplet-excited SAs ((3)SA(∗)). Compared with ionic strength, specific Cl(-) effects retarded the photodegradation of the SAs. Our study found that triplet-excited sulfamethazine can oxidize halide ions to produce halogen radicals, subsequently leading to the halogenation of sulfamethazine, which was confirmed by the identification of both chlorinated and brominated intermediates. These results indicate that halide ions play an important role in the photochemical behavior of some SAs in estuarine waters and seawater. The occurrence of halogenation for certain organic pollutants can be predicted by comparing the oxidation potentials of triplet-excited contaminants with those of halogen radicals. Our findings are helpful in understanding the photochemical behavior and assessing the ecological risks of SAs and other organic pollutants in estuarine and marine environment. PMID:27393965

  5. Effect of ferric and bromide ions on the formation and speciation of disinfection byproducts during chlorination

    Institute of Scientific and Technical Information of China (English)

    Shaogang Liu; Zhiliang Zhu; Yanling Qiu; Jianfu Zhao

    2011-01-01

    The effects of ferric ion, pH, and bromide on the formation and distribution of disinfection byproducts (DBPs) during chlorination were studied. Two raw water samples from Huangpu River and Yangtze River, two typical drinking water sources of Shanghai, were used for the investigation. Compared with the samples from Huangpu River, the raw water samples from Yangtze River had lower content of total organic carbon (TOC) and ferric ions, but higher bromide concentrations. Under controlled chlorination conditions,four trihalomethanes (THMs), nine haloacetic acids (HAAs), total organic halogen (TOX) and its halogen species fractions, including total organic chlorine (TOC1) and total organic bromide (TOBr), were determined. The results showed that co-existent ferric and bromide ions significantly promoted the formation of total THMs and HAAs for both raw water samples. Higher concentration of bromide ions significantly changed the speciation of the formed THMs and HAAs. There was an obvious shift to brominated species,which might result in a more adverse influence on the safety of drinking water. The results also indicated that high levels of bromide ions in raw water samples produced higher percentages of unknown TOBr.

  6. Effect of ferric and bromide ions on the formation and speciation of disinfection byproducts during chlorination.

    Science.gov (United States)

    Liu, Shaogang; Zhu, Zhiliang; Qiu, Yanling; Zhao, Jianfu

    2011-01-01

    The effects of ferric ion, pH, and bromide on the formation and distribution of disinfection byproducts (DBPs) during chlorination were studied. Two raw water samples from Huangpu River and Yangtze River, two typical drinking water sources of Shanghai, were used for the investigation. Compared with the samples from Huangpu River, the raw water samples from Yangtze River had lower content of total organic carbon (TOC) and ferric ions, but higher bromide concentrations. Under controlled chlorination conditions, four trihalomethanes (THMs), nine haloacetic acids (HAAs), total organic halogen (TOX) and its halogen species fractions, including total organic chlorine (TOC1) and total organic bromide (TOBr), were determined. The results showed that co-existent ferric and bromide ions significantly promoted the formation of total THMs and HAAs for both raw water samples. Higher concentration of bromide ions significantly changed the speciation of the formed THMs and HAAs. There was an obvious shift to brominated species, which might result in a more adverse influence on the safety of drinking water. The results also indicated that high levels of bromide ions in raw water samples produced higher percentages of unknown TOBr.

  7. Brominated flame retardant emissions from the open burning of five plastic wastes and implications for environmental exposure in China.

    Science.gov (United States)

    Ni, Hong-Gang; Lu, Shao-You; Mo, Ting; Zeng, Hui

    2016-07-01

    Based on the most widely used plastics in China, five plastic wastes were selected for investigation of brominated flame retardant (BFR) emission behaviors during open burning. Considerable variations were observed in the emission factors (EF) of polybrominated diphenyl ethers (PBDEs) and hexabromocyclododecanes (HBCDs) from the combustion of different plastic wastes. Distribution of BFR output mass showed that ΣPBDE was emitted mainly by the airborne particle (51%), followed by residual ash (44%) and the gas phase (5.1%); these values for ΣHBCD were 62%, 24%, and 14%, respectively. A lack of mass balance after the burning of the plastic wastes for some congeners (output/input mass ratios>1) suggested that formation and survival exceeded PBDE decomposition during the burns. However, that was not the case for HBCD. A comparison with literature data showed that the open burning of plastic waste is major source of PBDE compared to regulated combustion activities. Even for state-of-the-art waste incinerators equipped with sophisticated complex air pollution control technologies, BFRs are released on a small scale to the environment. According to our estimate, ΣPBDE release to the air and land from municipal solid waste (MSW) incineration plants in China in 2015 were 105 kg/year and 7124 kg/year. These data for ΣHBCD were 25.5 and 71.7 kg/year, respectively. Considering the fact that a growing number of cities in China are switching to incineration as the preferred method for MSW treatment, our estimate is especially important. This study provides the first data on the environmental exposure of BFRs emitted from MSW incineration in China.

  8. Brominated flame retardants in Korean river sediments, including changes in polybrominated diphenyl ether concentrations between 2006 and 2009.

    Science.gov (United States)

    Lee, In-Seok; Kang, Hee-Hyung; Kim, Un-Jung; Oh, Jeong-Eun

    2015-05-01

    Brominated flame retardants were analyzed in sediment samples from the Nakdong River basin, Korea. The total concentrations of the 27 polybrominated diphenyl ethers (PBDEs), including decabrominated diphenyl ether (BDE 209), analyzed were 0.55-300 ng g(-1) dry weight (dw), the BDE 209 concentrations were 0.39-190 ng g(-1) dw, the tetrabromobisphenol A (TBBPA) concentrations were 0.05-150 ng g(-1) dw, and the total hexabromocyclododecane (sum of α-, β-, γ-HBCDs) concentrations were 0.11-19 ng g(-1) dw. The PBDE and HBCD concentrations were comparable to or lower than the concentrations found in sediments from other countries, whereas the TBBPA concentrations were comparable to or higher than the concentrations found in other countries. The TBBPA concentrations were similar to or lower than the PBDE concentrations, even though more than twice as much TBBPA as total PBDEs is consumed in Korea, and this phenomenon was probably caused by TBBPA and PBDEs being used differently during the manufacture of products, and their different half-lives in sediment and affinities for the particle phase in aquatic environments. Sediment samples from several sampling sites close to facilities where expandable polystyrene, epoxy, and polycarbonate resins are manufactured and handled had relatively high TBBPA and HBCD concentrations. Temporal changes in the PBDE concentration strongly correlated with temporal variations in the geochemical compositions such as total organic carbon content and grain size value of the sediment. The PBDE and HBCD distribution profiles in the sediment samples indicated that commercial PBDE and HBCD products were released locally.

  9. Chlorinated, brominated, and fluorinated organic pollutants in Nile crocodile eggs from the Kruger National Park, South Africa.

    Science.gov (United States)

    Bouwman, Hindrik; Booyens, Paul; Govender, Danny; Pienaar, Danie; Polder, Anuschka

    2014-06-01

    Repeated annual episodes of Nile crocodile deaths in two isolated areas of the Kruger National Park prompted the investigation of possible organohalogen pollutant involvement. Crocodile eggs were collected close to one of the mortality sites (Gorge) as well as from a crocodile farm (CF) as reference. ∑DDT was significantly higher in Gorge (450ng/g wm) than in CF eggs (85ng/g wet mass). Percentage DDT of ∑DDT was significantly higher in CF (14 per cent) than in Gorge eggs (5 per cent). Mean ∑DDT was almost 70 times higher than mean ∑PCB in Gorge eggs. HCB, β-HCH, mirex, brominated flame retardants (BFRs), and perfluorinated compounds (PFCs) occurred at lower concentrations. We believe that the BFR and PFCs data represent the first published results for any crocodile egg. Thickening of the outer eggshell layer of Gorge eggs was significantly associated with higher concentrations of ∑DDT. Concentrations of ∑DDT and other pollutants were in the same range as eggs from elsewhere, where there were no mortalities. Concentrations of ∑DDT in eggs from healthy Australian crocodiles were of the same orders of magnitude as the current study, making it highly unlikely that the concentrations of pollutants measured in the present study would have caused or substantially contributed towards the mortalities observed. Concerns about reproduction and behaviour remain. As large predators, crocodilians are at the apex of the freshwater aquatic food web. More research is needed to guide measures to manage African freshwater systems so that it will also sustainably accommodate these large, long-lived animals.

  10. An XPS study of bromine in methanol etching and hydrogen peroxide passivation treatments for cadmium zinc telluride radiation detectors

    Science.gov (United States)

    Babar, S.; Sellin, P. J.; Watts, J. F.; Baker, M. A.

    2013-01-01

    The performance of single crystal CdZnTe radiation detectors is dependent on both the bulk and the surface properties of the material. After single crystal fabrication and mechanical polishing, modification of the surface to remove damage and reduce the surface leakage current is generally achieved through chemical etching followed by a passivation treatment. In this work, CdZnTe single crystals have been chemically etched using a bromine in methanol (BM) treatment. The BM concentrations employed were 0.2 and 2.0 (v/v) % and exposure times varied between 5 and 120 s. Angle resolved XPS and sputter depth profiling has been employed to characterize the surfaces for the different exposure conditions. A Te rich surface layer was formed for all exposures and the layer thickness was found to be independent of exposure time. The enriched Te layer thickness was accurately determined by calibrating the sputter rate against a CdTe layer of known thickness. For BM concentrations of 0.2 (v/v) % and 2 (v/v) %, the Te layer thickness was determined to be 1.3 ± 0.2 and 1.8 ± 0.2 nm, respectively. The BM etched surfaces have subsequently been passivated in a 30 wt.% H2O2 solution employing exposure time of 15 s. The oxide layer thickness has been calculated using two standard XPS methodologies, based on the Beer-Lambert expression. The TeO2 thickness calculated from ARXPS data are slightly higher than the thickness obtained by the simplified Beer-Lambert expression. For BM exposures of 30-120 s followed by a passivation treatment of 30 wt. % H2O2 solution employing an exposure time 15 s, the ARXPS method gave an average TeO2 thickness value of 1.20 nm and the simplified Beer-Lambert expression gave an average thickness value of 0.99 nm.

  11. Brominated flame retardant emissions from the open burning of five plastic wastes and implications for environmental exposure in China.

    Science.gov (United States)

    Ni, Hong-Gang; Lu, Shao-You; Mo, Ting; Zeng, Hui

    2016-07-01

    Based on the most widely used plastics in China, five plastic wastes were selected for investigation of brominated flame retardant (BFR) emission behaviors during open burning. Considerable variations were observed in the emission factors (EF) of polybrominated diphenyl ethers (PBDEs) and hexabromocyclododecanes (HBCDs) from the combustion of different plastic wastes. Distribution of BFR output mass showed that ΣPBDE was emitted mainly by the airborne particle (51%), followed by residual ash (44%) and the gas phase (5.1%); these values for ΣHBCD were 62%, 24%, and 14%, respectively. A lack of mass balance after the burning of the plastic wastes for some congeners (output/input mass ratios>1) suggested that formation and survival exceeded PBDE decomposition during the burns. However, that was not the case for HBCD. A comparison with literature data showed that the open burning of plastic waste is major source of PBDE compared to regulated combustion activities. Even for state-of-the-art waste incinerators equipped with sophisticated complex air pollution control technologies, BFRs are released on a small scale to the environment. According to our estimate, ΣPBDE release to the air and land from municipal solid waste (MSW) incineration plants in China in 2015 were 105 kg/year and 7124 kg/year. These data for ΣHBCD were 25.5 and 71.7 kg/year, respectively. Considering the fact that a growing number of cities in China are switching to incineration as the preferred method for MSW treatment, our estimate is especially important. This study provides the first data on the environmental exposure of BFRs emitted from MSW incineration in China. PMID:27064612

  12. Effects of dietary exposure to brominated flame retardant BDE-47 on thyroid condition, gonadal development and growth of zebrafish

    Science.gov (United States)

    Torres, Leticia; Orazio, Carl E.; Peterman, Paul H.; Patino, Reynaldo

    2013-01-01

    Little is known about the effects of brominated flame retardants in teleosts and some of the information currently available is inconsistent. This study examined effects of dietary exposure to 2,2′,4,4′-tetrabromodiphenyl ether (BDE-47) on thyroid condition, body mass and size, and gonadal development of zebrafish. Pubertal, 49-day-old (posthatch) fish were fed diets without BDE-47 (control) or with 1, 5 or 25 μg/g BDE-47/diet. Treatments were conducted in triplicate 30-L tanks each containing 50 zebrafish, and 15 fish per treatment (5 per tank) were sampled at days 40, 80 and 120 of exposure. Measurements were taken of body mass, standard length, head depth and head length. Sex (at 40–120 days of exposure), germ cell stage (at 40 days) and thyroid condition (at 120 days; follicular cell height, colloid depletion, angiogenesis) were histologically determined. Whole-body BDE-47 levels at study completion were within the high end of levels reported in environmentally exposed (wild) fishes. Analysis of variance was used to determine differences among treatments at each sampling time. No effects were observed on thyroid condition or germ cell stage in either sex. Reduced head length was observed in females exposed to BDE-47 at 80 days but not at 40 or 120 days. In males, no apparent effects of BDE-47 were observed at 40 and 80 days, but fish exposed to 25 μg/g had lower body mass at 120 days compared to control fish. These observations suggest that BDE-47 at environmentally relevant whole-body concentrations does not affect thyroid condition or pubertal development of zebrafish but does affect growth during the juvenile-to-adult transition, especially in males.

  13. Gestational and Early Postnatal Exposure to an Environmentally Relevant Mixture of Brominated Flame Retardants: General Toxicity and Skeletal Variations.

    Science.gov (United States)

    Tung, Emily W Y; Yan, Han; Lefèvre, Pavine L C; Berger, Robert G; Rawn, Dorothea F K; Gaertner, Dean W; Kawata, Alice; Rigden, Marc; Robaire, Bernard; Hales, Barbara F; Wade, Michael G

    2016-06-01

    Brominated flame retardants (BFRs) are stable environmental contaminants known to exert endocrine-disrupting effects. Developmental exposure to polybrominated diphenyl ethers (PBDEs) is correlated with impaired thyroid hormone signaling, as well as estrogenic and anti-androgenic effects. As previous studies have focused on a single congener or technical mixture, the purpose of the current study was to examine the effects of gestational and early postnatal exposure to an environmentally relevant mixture of BFRs designed to reflect house dust levels of PBDEs and hexabromocyclododecane on postnatal developmental outcomes. Pregnant Sprague-Dawley rats were exposed to the PBDE mixture from preconception to weaning (PND 21) through the diet containing 0, 0.75, 250, and 750 mg mixture/kg diet. BFR exposure induced transient reductions in body weight at PND 35 in male and from PND 30-45 in female offspring (250 and 750 mg/kg). Liver weights (PND 21) and xenobiotic metabolizing enzyme activities (PND 21 and 46) were increased in both male and female offspring exposed to 250 and 750 mg/kg diets. Furthermore, serum T4 levels were reduced at PND 21 in both,male and female offspring (250 and 750 mg/kg). At PND 21, Serum alkaline phosphatase (ALP) was decreased in males exposed to 750 mg/kg dietat, and females exposed to 250 and 750 mg/kg diets. At PND 46 ALP was significantly elevated in males (250 and 750 mg/kg). Variations in the cervical vertebrae and phalanges were observed in pups at PND 4 (250 and 750 mg/kg). Therefore, BFR exposure during gestation through to weaning alters developmental programming in the offspring. The persistence of BFRs in the environment remains a cause for concern with regards to developmental toxicity. PMID:27286044

  14. Occurrence and fate of PBDEs and novel brominated flame retardants in a wastewater treatment plant in Harbin, China.

    Science.gov (United States)

    Li, Bo; Sun, Shao-Jing; Huo, Chun-Yan; Li, Wen-Long; Zhu, Ning-Zheng; Qi, Hong; Kong, Ling-Jun; Li, Yi-Fan; Ma, Wan-Li

    2016-10-01

    Wastewater treatment plant (WWTP) is considered to be an important medium for the transport and transformation of organic pollutants. This study attempted to comprehensively investigate polybrominated diphenyl ethers (PBDEs) and novel brominated flame retardants (NBFRs) in a WWTP in Harbin, one of the main "Old Industrial Base" in China. The mean concentrations of the total PBDEs in the influent, effluent, and sludge were 152 ng/L, 16.2 ng/L, and 503 g/g dw, respectively, which were at the low end of the global range. BDE-209 was the most abundant congener, with contributions to the total PBDE ranging from 90.5 to 98.5 %. The level of the total NBFRs ranged from 24.5 to 107 ng/L, 0.95 to 20.3 ng/L, and 305 to 1202 ng/g dw in the influent, effluent, and sludge, respectively. For NBFRs, DBDPE was the most abundant congener (38.8-50.5 %), followed by BEHTBP (11.0-35.0 %). The ratio for DBDPE/BDE-209 (0.62 ± 0.42) was found less than 1 in sludge, which indicated that Deca-BDE is still the major BFR product in this city. Source identification suggested that indoor dust should be an important source of BFRs in the WWTP. Approximately 20.8 and 7.79 kg of PBDEs and NBFRs on annual basis were removed with the sludge. Biodegradation could play an important role on the fate of BFRs in the WWTP, which is required for future research.

  15. Natural and anthropogenically-produced brominated compounds in endemic dolphins from Western South Atlantic: Another risk to a vulnerable species

    International Nuclear Information System (INIS)

    Liver samples from 53 Franciscana dolphins along the Brazilian coast were analyzed for organobrominated compounds. Target substances included the following anthropogenic pollutants: polybrominated diphenyl ethers (PBDEs), polybrominated biphenyls (PBBs), pentabromoethylbenzene (PBEB), hexabromobenzene (HBB), decabromodiphenylethane (DBDPE), as well as the naturally-generated methoxylated-PBDEs (MeO-PBDEs). PBDE concentrations ranged from 6 to 1797 ng/g lw (mean 166 ± 298 ng/g lw) and were similar to those observed in cetaceans from Northern Hemisphere. PBBs were found in all sampling locations (< LOQ to 57 ng/g lw). DBDPE was detected in 42% of the dolphins from the most industrialized Brazilian state and the concentrations ranging from < LOQ to 352 ng/g lw. Franciscana dolphins from the tropical Brazilian shore presented the highest MeO-PBDE concentrations ever reported for coastal cetaceans (up to 14 μg/g lw). Eight MeO-PBDE congeners were detected and the present investigation constituted the first record of occurrence of six of them in marine mammal livers. - Highlights: ► PBDE, emerging BFR and MeO-PBDE levels in Franciscana dolphin from Brazil were reported. ► Six MeO-PBDEs were detected for the first time in marine mammals. ► PBDE contamination was similar than those from other industrialized areas around the world. ► MeO-PBDEs presented the higher concentrations found in coastal biota worldwide. - Concentrations and accumulation profiles of PBDEs, MeO-PBDEs and emerging brominated compounds in livers of dolphins from South Atlantic.

  16. Anthropogenic (PBDE) and naturally-produced (MeO-PBDE) brominated compounds in cetaceans--a review.

    Science.gov (United States)

    Alonso, Mariana B; Azevedo, Alexandre; Torres, João Paulo M; Dorneles, Paulo R; Eljarrat, Ethel; Barceló, Damià; Lailson-Brito, José; Malm, Olaf

    2014-05-15

    This paper reviews the available data on brominated flame retardants, the polybrominated diphenyl ethers (PBDEs), as well as on the naturally-produced methoxylated polybrominated diphenyl ethers (MeO-PBDEs) in cetacean tissues around the world. Levels and possible sources of both compound classes are discussed. Odontocete cetaceans accumulate higher PBDE concentrations than mysticete species. PBDE contamination was higher in cetaceans from the Northern hemisphere, whereas MeO-PBDE levels were higher in animals from the Southern hemisphere. Southern resident killer whales from NE Pacific presented the highest levels reported in biota, followed by bottlenose dolphins from North Atlantic (U.K. and U.S. coast). Many species presented PBDE concentrations above threshold levels for health effects in odontocetes. Time trend studies indicate that PBDE concentrations in odontocetes from Japan, China, U.S. and Canada coastal zones have increased significantly over the past 30 years. Studies from U.K. waters and NE Atlantic showed a decrease and/or stability of PBDE levels in cetacean tissues in recent decades. The highest MeO-PBDE concentrations were found in dolphins from Tanzania (Indian Ocean), bottlenose dolphins from Queensland, Australia (SW Pacific), and odontocetes from coastal and continental shelf waters off southeastern Brazil (SW Atlantic). The upwelling phenomenon and the presence of coral reef complexes in these tropical oceans may explain the large amounts of the naturally-produced organobromines. Considering that these bioaccumulative chemicals have properties that could cause many deleterious effects in those animals, future studies are required to evaluate the potential ecotoxicological risks. PMID:24636867

  17. Release of chlorinated, brominated and mixed halogenated dioxin-related compounds to soils from open burning of e-waste in Agbogbloshie (Accra, Ghana).

    Science.gov (United States)

    Tue, Nguyen Minh; Goto, Akitoshi; Takahashi, Shin; Itai, Takaaki; Asante, Kwadwo Ansong; Kunisue, Tatsuya; Tanabe, Shinsuke

    2016-01-25

    Although complex mixtures of dioxin-related compounds (DRCs) can be released from informal e-waste recycling, DRC contamination in African e-waste recycling sites has not been investigated. This study examined the concentrations of DRCs including chlorinated, brominated, mixed halogenated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs, PBDD/Fs, PXDD/Fs) and dioxin-like polychlorinated biphenyls (DL-PCBs) in surface soil samples from the Agbogbloshie e-waste recycling site in Ghana. PCDD/F and PBDD/F concentrations in open burning areas (18-520 and 83-3800 ng/g dry, respectively) were among the highest reported in soils from informal e-waste sites. The concentrations of PCDFs and PBDFs were higher than those of the respective dibenzo-p-dioxins, suggesting combustion and PBDE-containing plastics as principal sources. PXDFs were found as more abundant than PCDFs, and higher brominated analogues occurred at higher concentrations. The median total WHO toxic equivalent (TEQ) concentration in open burning soils was 7 times higher than the U.S. action level (1000 pg/g), with TEQ contributors in the order of PBDFs>PCDD/Fs>PXDFs. DRC emission to soils over the e-waste site as of 2010 was estimated, from surface soil lightness based on the correlations between concentrations and lightness, at 200mg (95% confidence interval 93-540 mg) WHO-TEQ over three years. People living in Agbogbloshie are potentially exposed to high levels of not only chlorinated but also brominated DRCs, and human health implications need to be assessed in future studies.

  18. A new technology for separation and recovery of materials from waste printed circuit boards by dissolving bromine epoxy resins using ionic liquid

    International Nuclear Information System (INIS)

    Highlights: ► WPCBs were heated in [EMIM+][BF4−] for recovering solider at 240 °C. ► The bromine epoxy resins in WPCBs were all dissolved in [EMIM+][BF4−] at 260 °C. ► Used [EMIM+][BF4−] is treated by water to obtain regeneration. - Abstract: Recovery of valuable materials from waste printed circuit boards (WPCBs) is quite difficult because WPCBs is a heterogeneous mixture of polymer materials, glass fibers, and metals. In this study, WPCBs was treated using ionic liquid (1-ethyl-3-methylimizadolium tetrafluoroborate [EMIM+][BF4−]). Experimental results showed that the separation of the solders went to completion, and electronic components (ECs) were removed in WPCBs when [EMIM+][BF4−] solution containing WPCBs was heated to 240 °C. Meanwhile, metallographic observations verified that the WPCBs had an initial delamination. When the temperature increased to 260 °C, the separation of the WPCBs went to completion, and coppers and glass fibers were obtained. The used [EMIM+][BF4−] was treated by water to generate a solid–liquid suspension, which was separated completely to obtain solid residues by filtration. Thermal analyses combined with infrared ray spectra (IR) observed that the solid residues were bromine epoxy resins. NMR (nuclear magnetic resonance) showed that hydrogen bond played an important role for [EMIM+][BF4−] dissolving bromine epoxy resins. This clean and non-polluting technology offers a new way to recycle valuable materials from WPCBs and prevent environmental pollution from WPCBs effectively.

  19. Hydroxylated PBDEs and brominated phenolic compounds in particulate matters emitted during recycling of waste printed circuit boards in a typical e-waste workshop of South China

    International Nuclear Information System (INIS)

    The hydroxylated PBDEs (OH-PBDEs) and brominated phenolic compounds in aerosol samples from a printed circuit boards recycling workshop were characterized. The results show that OH-PBDEs, which are naturally occurring compounds or metabolism of PBDEs, could also be emitted from the e-waste recycling. Five OH-PBDEs, several unidentified mono-OH-PBDE and di-OH-PBDE congeners were detected. The concentration of ∑OH-PBDEs was 1.74–4.22 ng m−3 (average of 2.66 ng m−3), with 6-OH-BDE-47 (0.329 ng m−3) as the most abundant identified congener. The total concentration of di- to tri-brominated phenols (BPs) was 18.8–32.0 ng m−3 (average of 26.3 ng m−3) with 2,4,6-triBP as the most abundant congener. These findings suggest that the recycling of printed circuit boards represent a strong source of OH-PBDEs and BPs to the atmosphere. Additionally, some phenolic compounds including brominated bisphenol A, hydroxylated polybrominated biphenyl species and etc. were also identified. -- Highlights: ► OH-PBDEs and BPs were abundant in the PM from printed circuit boards recycling. ► The patterns of OH-PBDEs and BPs were different from that in biotic environment. ► 6-OH-BDE-47 was the most abundant identified OH-PBDE congener. ► 2,4,6-triBP was the most abundant BP congener. ► Possible formation mechanisms of OH-PBDEs and BPs were discussed. -- Recycling of waste printed circuit boards might represent a strong source of OH-PBDEs, BPs and other phenolic compounds

  20. Release of chlorinated, brominated and mixed halogenated dioxin-related compounds to soils from open burning of e-waste in Agbogbloshie (Accra, Ghana).

    Science.gov (United States)

    Tue, Nguyen Minh; Goto, Akitoshi; Takahashi, Shin; Itai, Takaaki; Asante, Kwadwo Ansong; Kunisue, Tatsuya; Tanabe, Shinsuke

    2016-01-25

    Although complex mixtures of dioxin-related compounds (DRCs) can be released from informal e-waste recycling, DRC contamination in African e-waste recycling sites has not been investigated. This study examined the concentrations of DRCs including chlorinated, brominated, mixed halogenated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs, PBDD/Fs, PXDD/Fs) and dioxin-like polychlorinated biphenyls (DL-PCBs) in surface soil samples from the Agbogbloshie e-waste recycling site in Ghana. PCDD/F and PBDD/F concentrations in open burning areas (18-520 and 83-3800 ng/g dry, respectively) were among the highest reported in soils from informal e-waste sites. The concentrations of PCDFs and PBDFs were higher than those of the respective dibenzo-p-dioxins, suggesting combustion and PBDE-containing plastics as principal sources. PXDFs were found as more abundant than PCDFs, and higher brominated analogues occurred at higher concentrations. The median total WHO toxic equivalent (TEQ) concentration in open burning soils was 7 times higher than the U.S. action level (1000 pg/g), with TEQ contributors in the order of PBDFs>PCDD/Fs>PXDFs. DRC emission to soils over the e-waste site as of 2010 was estimated, from surface soil lightness based on the correlations between concentrations and lightness, at 200mg (95% confidence interval 93-540 mg) WHO-TEQ over three years. People living in Agbogbloshie are potentially exposed to high levels of not only chlorinated but also brominated DRCs, and human health implications need to be assessed in future studies. PMID:26474377

  1. Application of synthetic organo-bromine fungicides online on paperboard production%在线合成杀菌剂在纸板生产上的应用

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    Organo-bromine fungicides was synthesized online. The optimum adding point and dosage of the fungicides were researched on the premise of meeting production requirement. Also, the effect of the fungicides was compared before and after application.%  通过溴化铵在线合成杀菌剂的试验,在满足生产要求的前提下,探索杀菌剂最佳加入点和加药量,对使用前后的效果进行了对比分析。

  2. Brominated and fluorinated organic pollutants in the breast milk of first-time Irish mothers: is there a relationship to levels in food?

    LENUS (Irish Health Repository)

    Pratt, Iona

    2013-01-01

    Brominated flame retardants - polybrominated diphenyl ethers (PBDEs), polybrominated biphenyls (PBBs), hexabromocyclododecane (HBCD) and others - have been measured in 11 pooled breast milk samples from 109 first-time mothers in Ireland. Additionally, the study has measured levels of polybrominated dibenzo-p-dioxins and furans (PBDD\\/Fs), mixed halogenated dioxins (PXCC\\/Fs) and biphenyls (PXBs), polychlorinated naphthalenes (PCNs) and perfluoroalkylated substances (PFAS) in these samples. The mean sum of 19 PBDEs including BDE-209 was 4.85 ng g(-1) fat, which is comparable with that found in other European countries. BDE-47, BDE-153, BDE-209, BDE-99 and BDE-100 were found at the highest concentrations. The only PBBs detected consistently were BB-77, BB-126 and BB-153, with highest concentrations being found for BB-153 (mean = 0.13 ng g(-1) fat). The mean sum of HBCD enantiomers was 3.52 ng g(-1) fat, with α-HBCD representing over 70% of the total. Of the other brominated flame retardants - tetrabromobisphenol-A (TBBP-A), hexabromobenzene (HBB), decabromodiphenylethane (DBDPE) and bis(2,4,6-tribromophenoxyethane) (BTBPE) - examined, only TBBP-A was detected above the limit of detection (LOD), in two of the 11 pools analysed. All measured PBDF congeners were observed (at 0.02-0.91 pg g(-1) fat), but 2,3,7,8-tetrabromo-dibenzodioxin (TeBDD) was the only PBDD detected, with a mean concentration of 0.09 pg g(-1) fat. The occurrence of the mixed chlorinated\\/brominated dibenzodioxins, dibenzofurans and biphenyls, 2-B-3,7,8-CDD, 2,3-B-7,8-CDF, 4-B-2,3,7,8-CDF, PXB 105, PXB 118, PXB 126 and PCB 156 in breast milk in the current study may indicate that levels of these contaminants are increasing in the environment. Polychlorinated naphthalenes were detected in all samples, but not perfluorooctane sulfonate (PFOS) and other PFAS. The pattern of occurrence of these brominated and fluorinated persistent organic pollutants (POPs) in Irish breast milk shows a general

  3. OClO and BrO observations in the volcanic plume of Mt. Etna - Implications on the chemistry of chlorine and bromine species in volcanic plumes

    OpenAIRE

    J. Gliß; N. Bobrowski; Vogel, L.; D. Pöhler; U. Platt

    2015-01-01

    Spatial and temporal profiles of chlorine dioxide (OClO), bromine monoxide (BrO) and sulfur dioxide (SO2) of the volcanic plume at Mt. Etna, Italy, were investigated in September 2012 using Multi-Axis Differential Optical Absorption Spectroscopy (MAX-DOAS). OClO was detected in 119 individual measurements covering plume ages up to 6 min. BrO could be detected in 452 spectra up to 23 min downwind. The retrieved slant column densities (SCDs) reached maximum values of 2.0 &t...

  4. OClO and BrO observations in the volcanic plume of Mt. Etna – implications on the chemistry of chlorine and bromine species in volcanic plumes

    OpenAIRE

    J. Gliß; N. Bobrowski; Vogel, L.; U. Platt

    2014-01-01

    Spatial and temporal profiles of chlorine dioxide (OClO), bromine monoxide (BrO) and sulphur dioxide (SO2) were measured in the plume of Mt. Etna, Italy, in September 2012 using Multi-Axis-Differential-Optical-Absorption-Spectroscopy (MAX-DOAS). OClO (BrO) was detected in 119 (452) individual measurements covering plume ages up to 6 (23) minutes. The retrieved slant column densities (SCDs) reached values up to 2.0 × 1014 molecules cm−2 (OClO) and 1.1 ×...

  5. 溴系阻燃剂对阻燃HIPS耐候性能的影响%Study on the Weathering Performance of Flame Retardant HIPS by Brominated Flame Retardant

    Institute of Scientific and Technical Information of China (English)

    刘建中; 叶南飚; 李影; 刘涛; 周永胜; 熊建平

    2014-01-01

    Through different types of brominated flame retardants and Sb2 O3 complex to prepare flame retardant HIPS,the effect of different types of brominated flame retardants on flame retardant HIPS UV resistant aging proper-ty was examined. The results show the effects of different types of brominated flame retardant on the fire-retardant HIPS are very different ( color values of different types brominated flame retardant HIPS by xenon lamp aging 300 h are from 3. 5 to 56. 8),by analyzing the effect of different flame retardant brominated flame retardant HIPS weathe-ring performance,find that a stable flame structure is the main factor affecting the durability. With the increase of the content of bromine to the same structure,weather resistance is reduced.%通过不同类型溴系阻燃剂与Sb2 O3复配制备阻燃HIPS,考察不同类型溴系阻燃剂对阻燃HIPS耐紫外光老化性能影响,结果表明不同类型溴系阻燃对阻燃HIPS的影响有很大差异(300 h氙灯老化的不同类型溴系阻燃HIPS色差值从3.5到56.8),通过分析不同溴系阻燃剂对阻燃HIPS耐候性能的影响,发现阻燃剂结构的稳定性是影响耐候性的主要因素,相同结构下随着溴含量增加,耐候性降低。

  6. Gas phase ion chemistry

    CERN Document Server

    Bowers, Michael T

    1979-01-01

    Gas Phase Ion Chemistry, Volume 1 covers papers on the advances of gas phase ion chemistry. The book discusses the advances in flow tubes and the measurement of ion-molecule rate coefficients and product distributions; the ion chemistry of the earth's atmosphere; and the classical ion-molecule collision theory. The text also describes statistical methods in reaction dynamics; the state selection by photoion-photoelectron coincidence; and the effects of temperature and pressure in the kinetics of ion-molecule reactions. The energy distribution in the unimolecular decomposition of ions, as well

  7. Microfabricated ion frequency standard

    Science.gov (United States)

    Schwindt, Peter; Biedermann, Grant; Blain, Matthew G.; Stick, Daniel L.; Serkland, Darwin K.; Olsson, III, Roy H.

    2010-12-28

    A microfabricated ion frequency standard (i.e. an ion clock) is disclosed with a permanently-sealed vacuum package containing a source of ytterbium (Yb) ions and an octupole ion trap. The source of Yb ions is a micro-hotplate which generates Yb atoms which are then ionized by a ultraviolet light-emitting diode or a field-emission electron source. The octupole ion trap, which confines the Yb ions, is formed from suspended electrodes on a number of stacked-up substrates. A microwave source excites a ground-state transition frequency of the Yb ions, with a frequency-doubled vertical-external-cavity laser (VECSEL) then exciting the Yb ions up to an excited state to produce fluorescent light which is used to tune the microwave source to the ground-state transition frequency, with the microwave source providing a precise frequency output for the ion clock.

  8. Ion Coulomb Crystals

    CERN Document Server

    Thompson, Richard C

    2014-01-01

    Ion Coulomb crystals (ICC), formed by atomic ions at low temperatures in radiofrequency and Penning ion traps, are structures that have remarkable properties and many applications. Images of Coulomb crystals are striking and reveal the crystal structure, which arises from a balance between the trapping forces acting on the ions and their mutual Coulomb repulsion. Applications of these structures range from frequency standards and quantum simulation through to measurement of the cross sections of chemical reactions of ions.

  9. 溴碳树脂在防火涂料中的应用与发展%Application and Development of Bromine Carbon Resin Fire-retardant Coatings

    Institute of Scientific and Technical Information of China (English)

    吴纯.; 杨保平; 崔锦峰; 郭军红; 李军

    2012-01-01

    This paper reviews the achievements of the fire-retardant coatings research and utilization from the aspect of binder resins, introduces the application of bromine carbon resin in steel structure fire-retardant coatings, finishing fire-retardant coatings, fire- retardant anticorrosive floor coatings and water-borne environment-friendly fire-retardant coatings in details, and basing the actual situation of our country, gives the use prospect of the bromine carbon resin.%综述了近年来从基体树脂入手,在防火涂料的研究与应用中的成果,详细介绍了溴碳树脂在钢结构建筑防火涂料、饰面型防火涂料、防火防腐地坪涂料及水性环保型防火涂料中的应用情况,并结合我国的实际情况对溴碳树脂的应用前景进行了展望。

  10. Involvement of reactive oxygen species in brominated diphenyl ether-47-induced inflammatory cytokine release from human extravillous trophoblasts in vitro

    Energy Technology Data Exchange (ETDEWEB)

    Park, Hae-Ryung, E-mail: heaven@umich.edu; Kamau, Patricia W.; Loch-Caruso, Rita

    2014-01-15

    Polybrominated diphenyl ethers (PBDEs) are widely used flame retardant compounds. Brominated diphenyl ether (BDE)-47 is one of the most prevalent PBDE congeners found in human breast milk, serum and placenta. Despite the presence of PBDEs in human placenta, effects of PBDEs on placental cell function are poorly understood. The present study investigated BDE-47-induced reactive oxygen species (ROS) formation and its role in BDE-47-stimulated proinflammatory cytokine release in a first trimester human extravillous trophoblast cell line, HTR-8/SVneo. Exposure of HTR-8/SVneo cells for 4 h to 20 μM BDE-47 increased ROS generation 1.7 fold as measured by the dichlorofluorescein (DCF) assay. Likewise, superoxide anion production increased approximately 5 fold at 10 and 15 μM and 9 fold at 20 μM BDE-47 with a 1-h exposure, as measured by cytochrome c reduction. BDE-47 (10, 15 and 20 μM) decreased the mitochondrial membrane potential by 47–64.5% at 4, 8 and 24 h as assessed with the fluorescent probe Rh123. Treatment with 15 and 20 μM BDE-47 stimulated cellular release and mRNA expression of IL-6 and IL-8 after 12 and 24-h exposures: the greatest increases were a 35-fold increased mRNA expression at 12 h and a 12-fold increased protein concentration at 24 h for IL-6. Antioxidant treatments (deferoxamine mesylate, (±)α-tocopherol, or tempol) suppressed BDE-47-stimulated IL-6 release by 54.1%, 56.3% and 37.7%, respectively, implicating a role for ROS in the regulation of inflammatory pathways in HTR-8/SVneo cells. Solvent (DMSO) controls exhibited statistically significantly decreased responses compared with non-treated controls for IL-6 release and IL-8 mRNA expression, but these responses were not consistent across experiments and times. Nonetheless, it is possible that DMSO (used to dissolve BDE-47) may have attenuated the stimulatory actions of BDE-47 on cytokine responses. Because abnormal activation of proinflammatory responses can disrupt trophoblast functions

  11. Ground-based measurements of tropospheric and stratospheric bromine monoxide above Nairobi (1° S, 36° E

    Directory of Open Access Journals (Sweden)

    M. van Roozendael

    2007-05-01

    Full Text Available Ground based observations of stratospheric and tropospheric bromine monoxide, BrO, from a multi axial differential optical absorption spectrometer, MAXDOAS, located at the UNEP/UNON site in Nairobi (1° S, 36° E are presented for the year 2003. Differences in BrO slant column densities at 90° and 80° solar zenith angle retrieved from the zenith-sky measurements are used to study stratospheric BrO. They show only small variations with season, as expected for the small seasonality in stratospheric Bry and NO2 in this region. A pronounced diurnal variation can be observed, the average value for the morning being 1.3×1014 molecules/cm2 and for the evening 1.5×1014 molecules/cm2. The measurements are compared with simulations from a one-dimensional photochemical stacked box model which is coupled with a radiative transfer model to allow direct comparisons between the observations and the model calculations. In general the model reproduces the measurements very well. The differences in the absolute values are 15% for the evening and 20% for the morning which is within the limits of the combined uncertainties. Both seasonality and diurnal variation are well reproduced by the model. A sensitivity study shows that inclusion of the reaction BrONO2 + O(3P significantly improves the agreement between model calculations and measurements, indicating an important role of this reaction in the stratosphere near to the equator. Tropospheric BrO columns and profile information is derived from the combined results obtained in the different viewing directions for the average over several clear days. The resulting tropospheric BrO columns are in the range of 4–7.5×1012 molecules/cm2 which is significant but lower than in previous studies at mid and high latitudes. The vertical distribution of the tropospheric BrO peaks at about 3 km indicating the absence of local sources at this high altitude site.

  12. Body burdens of brominated flame retardants and other persistent organo-halogenated compounds and their descriptors in US girls

    International Nuclear Information System (INIS)

    Background: Levels of brominated flame retardants are increasing in US populations, yet little data are available on body burdens of these and other persistent hormonally active agents (HAAs) in school-aged children. Exposures to such chemicals may affect a number of health outcomes related to development and reproductive function. Objective: Determine the distribution of biomarkers of polybrominated diphenyl ethers (PBDEs), polychlorinated biphenyls (PCBs), and organo-chlorinated pesticides (OCPs), such as DDT/DDE, in children, and their variation by key descriptor variables. Methods: Ethnically diverse cohorts of girls 6-8 y old at baseline are being followed for growth and pubertal development in a multi-site, longitudinal study. Nearly 600 serum samples from the California and Ohio sites were analyzed for lipids, 35 PCB congeners, 11 PBDE congeners, and 9 OCPs. The biomarker distributions were examined and geometric means compared for selected analytes across categories of age, race, site, body mass index (BMI), parental education, maternal age at delivery, and breast feeding in adjusted models. Results: Six PBDE congeners were detected among greater than 70% of samples, with BDE-47 having the highest concentration (median 42.2, range 4.9-855 ng/g lipid). Girls in California had adjusted geometric mean (GM) PBDE levels significantly higher than girls in Ohio. Furthermore, Blacks had significantly higher adjusted GMs of all six PBDE congeners than Whites, and Hispanics had intermediate values. GMs tended to be lower among more obese girls, while other variables were not strongly associated. In contrast, GMs of the six PCB congeners most frequently detected were significantly lower among Blacks and Hispanics than Whites. PCBs and the three pesticides most frequently detected were also consistently lower among girls with high BMI, who were not breast-fed, whose mothers were younger, or whose care-givers (usually parents) were less educated. Girls in California had

  13. Association of brominated proteins and changes in protein expression in the rat kidney with subcarcinogenic to carcinogenic doses of bromate

    Energy Technology Data Exchange (ETDEWEB)

    Kolisetty, Narendrababu [Department of Pharmaceutical and Biomedical Sciences, College of Pharmacy, University of Georgia, Athens, GA 30602 (United States); Bull, Richard J. [MoBull Consulting, Richland, WA 99352 (United States); Muralidhara, Srinivasa; Costyn, Leah J. [Department of Pharmaceutical and Biomedical Sciences, College of Pharmacy, University of Georgia, Athens, GA 30602 (United States); Delker, Don A. [School of Medicine, University of Utah, Salt Lake City, UT 84132 (United States); Guo, Zhongxian [Water Quality Office, Public Utilities Board, 608576 (Singapore); Cotruvo, Joseph A. [Joseph Cotruvo and Associates, LLC, Washington, DC 20016 (United States); Fisher, Jeffrey W. [National Center for Toxicological Research, FDA, Jefferson, AR 72079 (United States); Cummings, Brian S., E-mail: bsc@rx.uga.edu [Department of Pharmaceutical and Biomedical Sciences, College of Pharmacy, University of Georgia, Athens, GA 30602 (United States)

    2013-10-15

    The water disinfection byproduct bromate (BrO{sub 3}{sup −}) produces cytotoxic and carcinogenic effects in rat kidneys. Our previous studies demonstrated that BrO{sub 3}{sup −} caused sex-dependent differences in renal gene and protein expression in rats and the elimination of brominated organic carbon in their urine. The present study examined changes in renal cell apoptosis and protein expression in male and female F344 rats treated with BrO{sub 3}{sup −} and associated these changes with accumulation of 3-bromotyrosine (3-BT)-modified proteins. Rats were treated with 0, 11.5, 46 and 308 mg/L BrO{sub 3}{sup −} in drinking water for 28 days and renal sections were prepared and examined for apoptosis (TUNEL-staining), 8-oxo-deoxyguanosine (8-oxoG), 3-BT, osteopontin, Kim-1, clusterin, and p-21 expression. TUNEL-staining in renal proximal tubules increased in a dose-related manner beginning at 11.5 mg BrO{sub 3}{sup −}/L in female rats and 46 mg/L in males. Increased 8-oxoG staining was observed at doses as low as 46 mg/L. Osteopontin expression also increased in a dose-related manner after treatment with 46 mg/L, in males only. In contrast, Kim-1 expression increased in a dose-related manner in both sexes, although to a greater extent in females at the highest dose. Clusterin and p21 expression also increased in a dose-related manner in both sexes. The expression of 3-BT-modified proteins only increased in male rats, following a pattern previously reported for accumulation of α-2{sub u}-globulin. Increases in apoptosis in renal proximal tubules of male and female rats at the lowest doses suggest a common mode of action for renal carcinogenesis for the two sexes that is independent of α-2{sub u}-globulin nephropathy. - Highlights: • Bromate induced nephrotoxicity in both male and female rats by similar mechanisms. • Apoptosis was seen in both male and female rats at the lowest doses tested. • Bromate-induced apoptosis correlated to 8-oxo

  14. Body burdens of brominated flame retardants and other persistent organo-halogenated compounds and their descriptors in US girls

    Energy Technology Data Exchange (ETDEWEB)

    Windham, Gayle C., E-mail: gayle.windham@cdph.ca.gov [CA Department of Public Health, DEODC, 850 Marina Bay Pkwy, Bldg. P, Richmond, CA 94804 (United States); Pinney, Susan M. [University of Cincinnati College of Medicine, Cincinnati, OH 45267 (United States); Sjodin, Andreas [Centers for Disease Control and Prevention, Atlanta, GA 30341 (United States); Lum, Raymond [Impact Assessment Inc., San Diego, CA (United States); Jones, Richard S.; Needham, Larry L. [Centers for Disease Control and Prevention, Atlanta, GA 30341 (United States); Biro, Frank M. [University of Cincinnati College of Medicine, Cincinnati, OH 45267 (United States); Hiatt, Robert A. [University of California Medical School, San Francisco, CA (United States); Kushi, Lawrence H. [Kaiser Permanente Northern California, Oakland, CA 94612 (United States)

    2010-04-15

    Background: Levels of brominated flame retardants are increasing in US populations, yet little data are available on body burdens of these and other persistent hormonally active agents (HAAs) in school-aged children. Exposures to such chemicals may affect a number of health outcomes related to development and reproductive function. Objective: Determine the distribution of biomarkers of polybrominated diphenyl ethers (PBDEs), polychlorinated biphenyls (PCBs), and organo-chlorinated pesticides (OCPs), such as DDT/DDE, in children, and their variation by key descriptor variables. Methods: Ethnically diverse cohorts of girls 6-8 y old at baseline are being followed for growth and pubertal development in a multi-site, longitudinal study. Nearly 600 serum samples from the California and Ohio sites were analyzed for lipids, 35 PCB congeners, 11 PBDE congeners, and 9 OCPs. The biomarker distributions were examined and geometric means compared for selected analytes across categories of age, race, site, body mass index (BMI), parental education, maternal age at delivery, and breast feeding in adjusted models. Results: Six PBDE congeners were detected among greater than 70% of samples, with BDE-47 having the highest concentration (median 42.2, range 4.9-855 ng/g lipid). Girls in California had adjusted geometric mean (GM) PBDE levels significantly higher than girls in Ohio. Furthermore, Blacks had significantly higher adjusted GMs of all six PBDE congeners than Whites, and Hispanics had intermediate values. GMs tended to be lower among more obese girls, while other variables were not strongly associated. In contrast, GMs of the six PCB congeners most frequently detected were significantly lower among Blacks and Hispanics than Whites. PCBs and the three pesticides most frequently detected were also consistently lower among girls with high BMI, who were not breast-fed, whose mothers were younger, or whose care-givers (usually parents) were less educated. Girls in California had

  15. Bromine and chlorine emissions from Plinian eruptions along the Central American Volcanic Arc: From source to atmosphere

    Science.gov (United States)

    Kutterolf, Steffen; Hansteen, Thor H.; Freundt, Armin; Wehrmann, Heidi; Appel, Karen; Krüger, Kirstin; Pérez, Wendy

    2015-11-01

    Large explosive volcanic eruptions inject gases, aerosols, and fine ashes into the stratosphere, potentially influencing climate and atmosphere composition on a global scale. Although the potential climate effect of chlorine (Cl) and bromine (Br) injections into the stratosphere is known, the global mass fluxes are poorly constrained. In this study we focus on the magmatic degassing systematics and budgets of Br and Cl, and on constraining the major sources of Br in a subduction setting. We therefore present a regional time series of Br and Cl emissions from 29 highly explosive eruptions throughout the Central American Volcanic Arc (CAVA), covering the last 200 ka, and a range of magmatic compositions and eruption magnitudes. We have measured Br and Cl in matrix glasses and melt inclusions using synchrotron radiation micro X-ray fluorescence spectrometry (SR micro-XRF) and electron microprobe, respectively. Melt inclusions of the CAVA tephras generally have higher Br (0.9 to 17.9 ppm) and Cl (770 to 3800 ppm) contents than the matrix glasses (0.39 to 1.5 ppm Br, 600 to 2800 ppm Cl). Moreover, the difference between maximum and minimum concentrations observed in melt inclusions of a given sample ranges between 9 and 90% of the maximum observed concentration for Br, and between 2 and 40% for Cl. Such intra-sample variations arise from variable pre-eruptive degassing of these halogens into a magmatic fluid phase. The relative loss of Br from the melt is 4 to 68 times higher than that of Cl. The masses of Br (2-1100 kt) and Cl (0.1 to 800 Mt) emitted by the eruptions generate instantaneous additions to the stratosphere potentially amounting to ∼6-5600% of the present-day stratospheric annual global loading of Equivalent Effective Stratospheric Chlorine. As the size of the stratospheric impact is primarily a function of eruption magnitude, we use magnitude-frequency relationships to estimate that eruptions adding ∼10% to resident EESC loading would occur every

  16. FRS ion catcher: Ion survival efficiency of radioactive ions

    International Nuclear Information System (INIS)

    At the MATS and LaSpec experiments of the LEB of the Super-FRS, high precision experiments will be done with low-energy exotic nuclei. To reach out to the most exotic nuclei, high efficiencies in the thermalization and beam preparation (e.g., separation and identification) are of upmost importance. Therefore, these parameters are optimized and tested online with the of the FRS Ion Catcher facility and in a separate off-line experiment. An in depth study of ion survival efficiencies has been performed to characterize the cryogenic stopping cell, to understand the slowing down process and to optimize the overall efficiency of the FRS Ion Catcher. Alpha-decay recoil ions from a 223Ra source are used to determine the ion survival and transport efficiencies, which reflect the charge-exchange and stripping cross-sections during the slowing down process of the ions. These investigations as well as other efficiency optimizations of the FRS Ion Catcher are presented.

  17. Ions and light

    CERN Document Server

    Bowers, Michael T

    2013-01-01

    Gas Phase Ion Chemistry, Volume 3: Ions and Light discusses how ions are formed by electron impact, ion-molecule reactions, or electrical discharge. This book discusses the use of light emitted by excited molecules to characterize either the chemistry that formed the excited ion, the structure of the excited ion, or both.Organized into 10 chapters, this volume begins with an overview of the extension of the classical flowing afterglow technique to include infrared and chemiluminescence and laser-induced fluorescence detection. This text then examines the experiments involving molecules that ar

  18. The Impact of Commercially Treated Oil and Gas Produced Water Discharges on Bromide Concentrations and Modeled Brominated Trihalomethane Disinfection Byproducts at two Downstream Municipal Drinking Water Plants in the Upper Allegheny River, Pennsylvania, USA

    Science.gov (United States)

    In 2010, a dramatic increase in the levels of total trihalomethane (THM) and the relative proportion of brominated species were observed in finished water at several Western Pennsylvania water utilities (PDW) using the Allegheny River as their raw water supply. An increase in br...

  19. Highly Charged Ion Sources

    International Nuclear Information System (INIS)

    In this work a study is made for the factors affecting the production and extraction of highly charged ion beams. Discussion is made for the production of highly charged ions from: the conventional vacuum are ion sources (Pinning PIG and Duoplasmatron DP) and the recent trends type which are (Electron Beam Ion Sources EBIS, Electron Cyclotron Resonance Ion Sources ECRIS and Laser Ion source LIS). The highly charged ions with charge state +7 , O+8 ,Ne+10 , Ar+18 have been extracted from the ECRIS while fully stripped Xe+54 has been extracted from EBIS. Improving the capabilities of the conventional RF ion source to produce multiply charged ions is achieved through the use of electron injection into the plasma or with the use of RF driven ion source. The later is based on coupling the RF power to the discharge through an internal antenna in vacuum are ion source. The argon ion species extracted from these upgraded RF ion sources could reach Ar+5

  20. Ion-ion recombination at high ion density

    International Nuclear Information System (INIS)

    By appeal to a Thomson-style treatment of recombination, it is shown that the rate for recombination of ions generated with uniform frequency within a reaction volume is a factor of 9/4 times greater than the rate for recombination of ions which approach each other from infinite separation. A valuable relationship connecting the two problems is uncovered. The analysis is pertinent to recombination involving dilute and high degrees of ionisation. (author)

  1. Applications of decelerated ions

    International Nuclear Information System (INIS)

    Many facilities whose sole purpose had been to accelerate ion beams are now becoming decelerators as well. The development and current status of accel-decel operations is reviewed here. Applications of decelerated ions in atomic physics experiments are discussed

  2. Atmospheric test of the J(BrONO2/kBrO+NO2 ratio: implications for total stratospheric Bry and bromine-mediated ozone loss

    Directory of Open Access Journals (Sweden)

    B. Werner

    2012-10-01

    Full Text Available We report on time-dependent O3, NO2 and BrO profile measurements taken in the stratosphere by limb observations of scattered skylight at high-latitudes during autumn circulation turn-over. The observations are complemented by simultaneous direct solar occultation measurements around sunset and sunrise performed aboard the same stratospheric balloon payload. Supporting radiative transfer and photochemical modelling indicates that, the measurements can be used to constrain the ratio J(BrONO2/kBrO+NO2, for which overall a 1.69 ± 0.04 larger ratio is found than indicated by the most recent JPL compilation (Sander et al., 2011. Sensitivity studies reveal the major reasons likely to be (1 a larger BrONO2 absorption cross-section σBrONO2, primarily for wavelengths larger than 300 nm, and (2 a smaller kBrO+NO2 at 220 K than given by Sander et al. (2011. Other factors, e.g. the actinic flux and quantum yield for the dissociation of BrONO2, can be ruled out. The observations also have consequences for total inorganic stratospheric bromine (Bry estimated from stratospheric BrO measurements at high NOx loadings, since the J(BrONO2/kBrO+NO2 ratio largely determines the stratospheric BrO/Bry ratio during daylight. Using the revised J(BrONO2/kBrO+NO2 ratio, total stratospheric Bry is likely to be 1.4 ppt smaller than previously estimated from BrO profile measurements at high NOx loadings. This brings estimates of total stratospheric bromine inferred from organic source gas measurements (i.e. CH3Br, the halons, CH2Br2, CHBr3, ... into closer agreement with estimates based on BrO observations (inorganic method. The consequences for stratospheric ozone due to the revised J(BrONO2/kBrO+NO2 ratio are small (maximum −0.8%, since at high NOx (for which most Bry assessments are made an overestimated Bry using the inorganic method would in return almost cancel out with the amount of reactive bromine calculated in the photochemical models.

  3. Determining Mass and Persistence of a Reactive Brominated-Solvent DNAPL Source Using Mass Depletion-Mass Flux Reduction Relationships During Pumping

    Science.gov (United States)

    Johnston, C. D.; Davis, G. B.; Bastow, T.; Annable, M. D.; Trefry, M. G.; Furness, A.; Geste, Y.; Woodbury, R.; Rhodes, S.

    2011-12-01

    Measures of the source mass and depletion characteristics of recalcitrant dense non-aqueous phase liquid (DNAPL) contaminants are critical elements for assessing performance of remediation efforts. This is in addition to understanding the relationships between source mass depletion and changes to dissolved contaminant concentration and mass flux in groundwater. Here we present results of applying analytical source-depletion concepts to pumping from within the DNAPL source zone of a 10-m thick heterogeneous layered aquifer to estimate the original source mass and characterise the time trajectory of source depletion and mass flux in groundwater. The multi-component, reactive DNAPL source consisted of the brominated solvent tetrabromoethane (TBA) and its transformation products (mostly tribromoethene - TriBE). Coring and multi-level groundwater sampling indicated the DNAPL to be mainly in lower-permeability layers, suggesting the source had already undergone appreciable depletion. Four simplified source dissolution models (exponential, power function, error function and rational mass) were able to describe the concentration history of the total molar concentration of brominated organics in extracted groundwater during 285 days of pumping. Approximately 152 kg of brominated compounds were extracted. The lack of significant kinetic mass transfer limitations in pumped concentrations was notable. This was despite the heterogeneous layering in the aquifer and distribution of DNAPL. There was little to choose between the model fits to pumped concentration time series. The variance of groundwater velocities in the aquifer determined during a partitioning inter-well tracer test (PITT) were used to parameterise the models. However, the models were found to be relatively insensitive to this parameter. All models indicated an initial source mass around 250 kg which compared favourably to an estimate of 220 kg derived from the PITT. The extrapolated concentrations from the

  4. Gas phase ion chemistry

    CERN Document Server

    Bowers, Michael T

    1979-01-01

    Gas Phase Ion Chemistry, Volume 2 covers the advances in gas phase ion chemistry. The book discusses the stabilities of positive ions from equilibrium gas-phase basicity measurements; the experimental methods used to determine molecular electron affinities, specifically photoelectron spectroscopy, photodetachment spectroscopy, charge transfer, and collisional ionization; and the gas-phase acidity scale. The text also describes the basis of the technique of chemical ionization mass spectrometry; the energetics and mechanisms of unimolecular reactions of positive ions; and the photodissociation

  5. Ion Channels, Natural Nanovalves

    OpenAIRE

    Eisenberg, Bob

    2012-01-01

    Ion channels are proteins with holes down their middle that control the flow of ions and electric current across otherwise impermeable biological membranes. The flow of sodium, potassium, calcium (divalent), and chloride ions have been central issues in biology for more than a century. The flow of current is responsible for the signals of the nervous system that propagate over long distances (meters). The concentration of divalent calcium ions is a 'universal' signal that controls many differ...

  6. Ion mobility spectrometry

    CERN Document Server

    Eiceman, GA

    2005-01-01

    Key Developments for Faster, More Precise Detection Capabilities Driven by the demand for the rapid and advanced detection of explosives, chemical and biological warfare agents, and narcotics, ion mobility spectrometry (IMS) undergone significant refinements in technology, computational capabilities, and understanding of the principles of gas phase ion chemistry and mobility. Beginning with a thorough discussion of the fundamental theories and physics of ion mobility, Ion Mobility Spectrometry, Second Edition describes the recent advances in instrumentation and newly

  7. Vacuum Arc Ion Sources

    OpenAIRE

    Brown, I.

    2014-01-01

    The vacuum arc ion source has evolved into a more or less standard laboratory tool for the production of high-current beams of metal ions, and is now used in a number of different embodiments at many laboratories around the world. Applications include primarily ion implantation for material surface modification research, and good performance has been obtained for the injection of high-current beams of heavy-metal ions, in particular uranium, into particle accelerators. As the use of the sourc...

  8. Ion trap simulation tools.

    Energy Technology Data Exchange (ETDEWEB)

    Hamlet, Benjamin Roger

    2009-02-01

    Ion traps present a potential architecture for future quantum computers. These computers are of interest due to their increased power over classical computers stemming from the superposition of states and the resulting capability to simultaneously perform many computations. This paper describes a software application used to prepare and visualize simulations of trapping and maneuvering ions in ion traps.

  9. [Development of metal ions analysis by ion chromatography].

    Science.gov (United States)

    Yu, Hong; Wang, Yuxin

    2007-05-01

    Analysis of metal ions by ion chromatography, including cation-exchange ion chromatography, anion-exchange ion chromatography and chelation ion chromatography, is reviewed. The cation-exchange ion chromatography is a main method for the determination of metal ions. Stationary phases in cation-exchange ion chromatography are strong acid cation exchanger (sulfonic) and weak acid cation exchanger (carboxylic). Alkali metal ions, alkaline earth metal ions, transition metal ions, rare earth metal ions, ammonium ions and amines can be analyzed by cation-exchange ion chromatography with a suitable detector. The anion-exchange ion chromatography is suitable for the separation and analysis of alkaline earth metal ions, transition metal ions and rare earth metal ions. The selectivity for analysis of metal ions with anion-exchange ion chromatography is good. Simultaneous determination of metal ions and inorganic anions can be achieved using anion-exchange ion chromatography. Chelation ion chromatography is suitable for the determination of trace metal ions in complex matrices. A total of 125 references are cited.

  10. The Sensitivity of Arctic Ozone Loss to Polar Stratospheric Cloud Volume and Chlorine and Bromine Loading in a Chemistry and Transport Model

    Science.gov (United States)

    Douglass, A. R.; Stolarski, R. S.; Strahan, S. E.; Polansky, B. C.

    2006-01-01

    The sensitivity of Arctic ozone loss to polar stratospheric cloud volume (V(sub PSC)) and chlorine and bromine loading is explored using chemistry and transport models (CTMs). A simulation using multi-decadal output from a general circulation model (GCM) in the Goddard Space Flight Center (GSFC) CTM complements one recycling a single year s GCM output in the Global Modeling Initiative (GMI) CTM. Winter polar ozone loss in the GSFC CTM depends on equivalent effective stratospheric chlorine (EESC) and polar vortex characteristics (temperatures, descent, isolation, polar stratospheric cloud amount). Polar ozone loss in the GMI CTM depends only on changes in EESC as the dynamics repeat annually. The GSFC CTM simulation reproduces a linear relationship between ozone loss and Vpsc derived from observations for 1992 - 2003 which holds for EESC within approx.85% of its maximum (approx.1990 - 2020). The GMI simulation shows that ozone loss varies linearly with EESC for constant, high V(sub PSC).

  11. Open M-shell Opacity of Bromine Plasma in Comparison of the Detailed Level Accounting Model with the Average Atom Model

    Institute of Scientific and Technical Information of China (English)

    JIN Feng-Tao; YUAN Jian-Min

    2005-01-01

    @@ The open M-shell opacity of a hot bromine plasma has been calculated by using a detailed level accounting (DLA )model. One-electron orbitals obtained by solving the fully relativistic Dirac-Fock equations are used to obtain the atomic levels and the radiative transition oscillator strengths. Only the level mixing within the same electron configuration is considered to reduce the complexity of the calculations. Detailed comparisons have been made between the results of the DLA and average atom (AA) models. Good agreements are found for both the M-shell transition arrays and the Planck mean opacity but there are differences for the line positions in the 2p → 3d absorption region due to the statistical treatment for the one-electron orbitals in the AA model.

  12. Plasma Ion Sources

    International Nuclear Information System (INIS)

    A wide variety of ion source types has been developed. Ion sources can provide beams of hundreds of amperes for fusion applications, nano-amperes for microprobe trace analysis and broad beams for ion implantation, space thrusters, industrial polymerisation and food sterilisation. Also it can be used in medical, military and accelerators applications. In this paper, three different types of plasma ion sources with different means for producing the discharge current and the ions extracting current from the plasma are studied. The various plasma described include, d.c glow discharge plasma, arc discharge plasma and radio frequency discharge plasma

  13. Superconducting microfabricated ion traps

    CERN Document Server

    Wang, Shannon X; Labaziewicz, Jaroslaw; Dauler, Eric; Berggren, Karl; Chuang, Isaac L

    2010-01-01

    We fabricate superconducting ion traps with niobium and niobium nitride and trap single 88Sr ions at cryogenic temperatures. The superconducting transition is verified and characterized by measuring the resistance and critical current using a 4-wire measurement on the trap structure, and observing change in the rf reflection. The lowest observed heating rate is 2.1(3) quanta/sec at 800 kHz at 6 K and shows no significant change across the superconducting transition, suggesting that anomalous heating is primarily caused by noise sources on the surface. This demonstration of superconducting ion traps opens up possibilities for integrating trapped ions and molecular ions with superconducting devices.

  14. Bromine-80m-labeled estrogens: Auger-electron emitting, estrogen receptor-directed ligands with potential for therapy of estrogen receptor positive cancers

    International Nuclear Information System (INIS)

    A triphenylbromoethylene, 1,1-bis(p-hydroxyphenyl)-2-bromo-2-phenylethylene, Br-BHPE, and a bromosteroidal estrogen, 17α- bromovinylestradiol, BrVE2, were labeled with the Auger electron emitting nuclide bromine-80m, prepared by the [p,n] reaction with 80Se. To assess their potential as estrogen receptor (ER) directed therapeutic substrates the bromine-80m labeled estrogens were injected into immature female rats and the tissue distribution studied at 0.5 and 2 hours. Both radiobromoestrogens showed substantial diethylstilbesterol (DES)-inhibitable localization in the ER rich tissues, uterus, pituitary, ovary and vagina at both time points. While the percent dose per gram tissue was higher for the Br-BHPE, the BrVE2 showed higher tissue to blood ratios, especially at 2 hr, reflecting the lower blood concentrations of radiobromine following administration of the steroidal bromoestrogen. Comparing intraperitoneal, intravenous and subcutaneous routes of administration for the radiobromine labeled Br-BHPE, the intraperitoneal route was particularly advantageous to provide maximum, DES-inhibitable concentrations in the peritoneal, ER-rich target organs, the uterus, ovary and vagina. While uterine concentrations after BrBHPE were from 10--48% dose/g and after BrVE2 were 15--25% dose/g, similar treatment with /sup 80m/Br as sodium bromide showed uniform low concentrations in all tissues at about the levels seen in blood. The effective specific activity of [/sup 80m/Br]BrBHPE, assayed by specific binding to ER in rat uterine cytosol, was 8700 Ci/mmole. 23 refs., 9 figs., 2 tabs

  15. Bromine-80m-labeled estrogens: Auger-electron emitting, estrogen receptor-directed ligands with potential for therapy of estrogen receptor positive cancers

    Energy Technology Data Exchange (ETDEWEB)

    DeSombre, E.R.; Mease, R.C.; Hughes, A.; Harper, P.V.; DeJesus, O.T.; Friedman, A.M.

    1988-01-01

    A triphenylbromoethylene, 1,1-bis(p-hydroxyphenyl)-2-bromo-2-phenylethylene, Br-BHPE, and a bromosteroidal estrogen, 17..cap alpha..- bromovinylestradiol, BrVE/sub 2/, were labeled with the Auger electron emitting nuclide bromine-80m, prepared by the (p,n) reaction with /sup 80/Se. To assess their potential as estrogen receptor (ER) directed therapeutic substrates the bromine-80m labeled estrogens were injected into immature female rats and the tissue distribution studied at 0.5 and 2 hours. Both radiobromoestrogens showed substantial diethylstilbesterol (DES)-inhibitable localization in the ER rich tissues, uterus, pituitary, ovary and vagina at both time points. While the percent dose per gram tissue was higher for the Br-BHPE, the BrVE/sub 2/ showed higher tissue to blood ratios, especially at 2 hr, reflecting the lower blood concentrations of radiobromine following administration of the steroidal bromoestrogen. Comparing intraperitoneal, intravenous and subcutaneous routes of administration for the radiobromine labeled Br-BHPE, the intraperitoneal route was particularly advantageous to provide maximum, DES-inhibitable concentrations in the peritoneal, ER-rich target organs, the uterus, ovary and vagina. While uterine concentrations after BrBHPE were from 10--48% dose/g and after BrVE/sub 2/ were 15--25% dose/g, similar treatment with /sup 80m/Br as sodium bromide showed uniform low concentrations in all tissues at about the levels seen in blood. The effective specific activity of (/sup 80m/Br)BrBHPE, assayed by specific binding to ER in rat uterine cytosol, was 8700 Ci/mmole. 23 refs., 9 figs., 2 tabs.

  16. Dependence of the vertical distribution of bromine monoxide in the lower troposphere on meteorological factors such as wind speed and stability

    Science.gov (United States)

    Peterson, P. K.; Simpson, W. R.; Pratt, K. A.; Shepson, P. B.; Frieß, U.; Zielcke, J.; Platt, U.; Walsh, S. J.; Nghiem, S. V.

    2015-02-01

    Multiple axis differential absorption spectroscopy (MAX-DOAS) measurements of bromine monoxide (BrO) probed the vertical structure of halogen activation events during March-May 2012 at Barrow, Alaska. An analysis of the BrO averaging kernels and degrees of freedom obtained by optimal-estimation-based inversions from raw MAX-DOAS measurements reveals the information is best represented by reducing the retrieved BrO profile to two quantities: the integrated column from the surface through 200 m (VCD200 m), and the lower tropospheric vertical column density (LT-VCD), which represents the integrated column of BrO from the surface through 2 km. The percentage of lower tropospheric BrO in the lowest 200 m was found to be highly variable ranging from shallow layer events, where BrO is present primarily in the lowest 200 m, to distributed column events where BrO is observed at higher altitudes. The highest observed LT-VCD events occurred when BrO was distributed throughout the lower troposphere, rather than concentrated near the surface. Atmospheric stability in the lowest 200 m influenced the percentage of LT-VCD that is in the lowest 200 m, with inverted temperature structures having a first-to-third quartile range (Q1-Q3) of VCD200 m/LT-VCD from 15-39%, while near-neutral-temperature structures had a Q1-Q3 range of 7-13%. Data from this campaign show no clear influence of wind speed on either lower tropospheric bromine activation (LT-VCD) or the vertical distribution of BrO, while examination of seasonal trends and the temperature dependence of the vertical distribution supported the conclusion that the atmospheric stability affects the vertical distribution of BrO.

  17. Microfabricated ion trap array

    Science.gov (United States)

    Blain, Matthew G.; Fleming, James G.

    2006-12-26

    A microfabricated ion trap array, comprising a plurality of ion traps having an inner radius of order one micron, can be fabricated using surface micromachining techniques and materials known to the integrated circuits manufacturing and microelectromechanical systems industries. Micromachining methods enable batch fabrication, reduced manufacturing costs, dimensional and positional precision, and monolithic integration of massive arrays of ion traps with microscale ion generation and detection devices. Massive arraying enables the microscale ion traps to retain the resolution, sensitivity, and mass range advantages necessary for high chemical selectivity. The reduced electrode voltage enables integration of the microfabricated ion trap array with on-chip circuit-based rf operation and detection electronics (i.e., cell phone electronics). Therefore, the full performance advantages of the microfabricated ion trap array can be realized in truly field portable, handheld microanalysis systems.

  18. Atmospheric Solid Analysis Probe-Ion Mobility Mass Spectrometry: An Original Approach to Characterize Grafting on Cyclic Olefin Copolymer Surfaces.

    Science.gov (United States)

    Vieillard, Julien; Hubert-Roux, Marie; Brisset, Florian; Soulignac, Cecile; Fioresi, Flavia; Mofaddel, Nadine; Morin-Grognet, Sandrine; Afonso, Carlos; Le Derf, Franck

    2015-12-01

    A cyclic olefin copolymer (COC) was grafted with aryl layers from aryldiazonium salts, and then we combined infrared spectrometry, atomic force microscopy (AFM), and ion mobility mass spectrometry with atmospheric solid analysis probe ionization (ASAP-IM-MS) to characterize the aryl layers. ASAP is a recent atmospheric ionization method dedicated to the direct analysis of solid samples. We demonstrated that ASAP-IM-MS is complementary to other techniques for characterizing bromine and sulfur derivatives of COC on surfaces. ASAP-IM-MS was useful for optimizing experimental grafting conditions and to elucidate hypotheses around aryl layer formation during the grafting process. Thus, ASAP-IM-MS is a good candidate tool to characterize covalent grafting on COC surfaces.

  19. The Earliest Ion Channels

    Science.gov (United States)

    Pohorille, A.; Wilson, M. A.; Wei, C.

    2009-12-01

    Supplying protocells with ions required assistance from channels spanning their membrane walls. The earliest channels were most likely short proteins that formed transmembrane helical bundles surrounding a water-filled pore. These simple aggregates were capable of transporting ions with efficiencies comparable to those of complex, contemporary ion channels. Channels with wide pores exhibited little ion selectivity but also imposed only modest constraints on amino acid sequences of channel-forming proteins. Channels with small pores could have been selective but also might have required a more precisely defined sequence of amino acids. In contrast to modern channels, their protocellular ancestors had only limited capabilities to regulate ion flux. It is postulated that subsequent evolution of ion channels progressed primarily to acquire precise regulation, and not high efficiency or selectivity. It is further proposed that channels and the surrounding membranes co-evolved.

  20. Ion photon emission microscope

    Science.gov (United States)

    Doyle, Barney L.

    2003-04-22

    An ion beam analysis system that creates microscopic multidimensional image maps of the effects of high energy ions from an unfocussed source upon a sample by correlating the exact entry point of an ion into a sample by projection imaging of the ion-induced photons emitted at that point with a signal from a detector that measures the interaction of that ion within the sample. The emitted photons are collected in the lens system of a conventional optical microscope, and projected on the image plane of a high resolution single photon position sensitive detector. Position signals from this photon detector are then correlated in time with electrical effects, including the malfunction of digital circuits, detected within the sample that were caused by the individual ion that created these photons initially.

  1. Lithium-ion batteries

    CERN Document Server

    Yoshio, Masaki; Kozawa, Akiya

    2010-01-01

    This book is a compilation of up-to-date information relative to Li-Ion technology. It provides the reader with a single source covering all important aspects of Li-Ion battery operations. It fills the gap between the old original Li-Ion technology and present state of the technology that has developed into a high state of practice. The book is designed to provide a single source for an up-to-date description of the technology associated with the Li-Ion battery industry. It will be useful to researchers interested in energy conversion for the direct conversion of chemical energy into electrica

  2. Correlation ion mobility spectroscopy

    Science.gov (United States)

    Pfeifer, Kent B.; Rohde, Steven B.

    2008-08-26

    Correlation ion mobility spectrometry (CIMS) uses gating modulation and correlation signal processing to improve IMS instrument performance. Closely spaced ion peaks can be resolved by adding discriminating codes to the gate and matched filtering for the received ion current signal, thereby improving sensitivity and resolution of an ion mobility spectrometer. CIMS can be used to improve the signal-to-noise ratio even for transient chemical samples. CIMS is especially advantageous for small geometry IMS drift tubes that can otherwise have poor resolution due to their small size.

  3. Cold Strontium Ion Source for Ion Interferometry

    Science.gov (United States)

    Jackson, Jarom; Durfee, Dallin

    2015-05-01

    We are working on a cold source of Sr Ions to be used in an ion interferometer. The beam will be generated from a magneto-optical trap (MOT) of Sr atoms by optically ionizing atoms leaking out a carefully prepared hole in the MOT. A single laser cooling on the resonant transition (461 nm) in Sr should be sufficient for trapping, as we've calculated that losses to the atom beam will outweigh losses to dark states. Another laser (405 nm), together with light from the trapping laser, will drive a two photon transition in the atom beam to an autoionizing state. Supported by NSF Award No. 1205736.

  4. Mercury ion thruster technology

    Science.gov (United States)

    Beattie, J. R.; Matossian, J. N.

    1989-01-01

    The Mercury Ion Thruster Technology program was an investigation for improving the understanding of state-of-the-art mercury ion thrusters. Emphasis was placed on optimizing the performance and simplifying the design of the 30 cm diameter ring-cusp discharge chamber. Thruster performance was improved considerably; the baseline beam-ion production cost of the optimized configuration was reduced to Epsilon (sub i) perspective to 130 eV/ion. At a discharge propellant-utilization efficiency of 95 percent, the beam-ion production cost was reduced to about 155 eV/ion, representing a reduction of about 40 eV/ion over the corresponding value for the 30 cm diameter J-series thruster. Comprehensive Langmuir-probe surveys were obtained and compared with similar measurements for a J-series thruster. A successful volume-averaging scheme was developed to correlate thruster performance with the dominant plasma processes that prevail in the two thruster designs. The average Maxwellian electron temperature in the optimized ring-cusp design is as much as 1 eV higher than it is in the J-series thruster. Advances in ion-extraction electrode fabrication technology were made by improving materials selection criteria, hydroforming and stress-relieving tooling, and fabrications procedures. An ion-extraction performance study was conducted to assess the effect of screen aperture size on ion-optics performance and to verify the effectiveness of a beam-vectoring model for three-grid ion optics. An assessment of the technology readiness of the J-series thruster was completed, and operation of an 8 cm IAPS thruster using a simplified power processor was demonstrated.

  5. Metal Ions in Unusual Valency States.

    Science.gov (United States)

    Sellers, Robin M.

    1981-01-01

    Discusses reactivity of metal ions with the primary products of water radiolysis, hyper-reduced metal ions, zero-valent metal ions, unstable divalent ions from the reduction of bivalent ions, hyper-oxidized metal ions, and metal complexes. (CS)

  6. Ion-beam technologies

    Energy Technology Data Exchange (ETDEWEB)

    Fenske, G.R. [Argonne National Lab., IL (United States)

    1993-01-01

    This compilation of figures and diagrams reviews processes for depositing diamond/diamond-like carbon films. Processes addressed are chemical vapor deposition (HFCVD, PACVD, etc.), plasma vapor deposition (plasma sputtering, ion beam sputtering, evaporation, etc.), low-energy ion implantation, and hybrid processes (biased sputtering, IBAD, biased HFCVD, etc.). The tribological performance of coatings produced by different means is discussed.

  7. Relativistic heavy ion research

    International Nuclear Information System (INIS)

    This report discusses the following topics: antiproton production; Bose-Einstein correlations; high-transverse momentum spectra; strangeness enhancement in heavy ion collisions; search for rare negative secondaries of antiprotons and antinuclei produced in heavy ion collisions; quark matter; and time-of-flight systems test at Brookhaven AGS. (LSP)

  8. Where do ions solvate?

    Indian Academy of Sciences (India)

    Yan Levin

    2005-06-01

    We study a simple model of ionic solvation inside a water cluster. The cluster is modeled as a spherical dielectric continuum. It is found that unpolarizable ions always prefer the bulk solvation. On the other hand, for polarizable ions, there exists a critical value of polarization above which surface solvation becomes energetically favorable for large enough water clusters.

  9. 浓海水提溴方法及存在问题的研究%Research on Existing Problems and the Method of Extracting Bromine from the Concentrated Seawater

    Institute of Scientific and Technical Information of China (English)

    刘立平

    2012-01-01

    The paper reviewed the method of extracting bromine from the concentrated seawater( the lower concentration brine) , and seriously studied on the process of air blowing - acidification absorption which ofter used at present. The production costs of extracting bromine from the concentrated seawater were effectively controlled by using the automatic optimization to control the process parameters. Use the concentrated seawater which from seawater desalination project to extract bromine has been used in the industrial production.%文章综述了浓海水(低浓度卤水)的制溴方法,并对目前使用的空气吹出酸法吸收工艺进行了认真研究,通过自动优化控制浓海水制溴工艺参数,使浓海水提溴的生产成本得到有效控制,利用海水淡化后的浓海水提溴实现了工业化生产.

  10. Ion mobility sensor system

    Science.gov (United States)

    Xu, Jun; Watson, David B.; Whitten, William B.

    2013-01-22

    An ion mobility sensor system including an ion mobility spectrometer and a differential mobility spectrometer coupled to the ion mobility spectrometer. The ion mobility spectrometer has a first chamber having first end and a second end extending along a first direction, and a first electrode system that generates a constant electric field parallel to the first direction. The differential mobility spectrometer includes a second chamber having a third end and a fourth end configured such that a fluid may flow in a second direction from the third end to the fourth end, and a second electrode system that generates an asymmetric electric field within an interior of the second chamber. Additionally, the ion mobility spectrometer and the differential mobility spectrometer form an interface region. Also, the first end and the third end are positioned facing one another so that the constant electric field enters the third end and overlaps the fluid flowing in the second direction.

  11. Lipid Ion Channels

    CERN Document Server

    Heimburg, Thomas

    2010-01-01

    The interpretation electrical phenomena in biomembranes is usually based on the assumption that the experimentally found discrete ion conduction events are due to a particular class of proteins called ion channels while the lipid membrane is considered being an inert electrical insulator. The particular protein structure is thought to be related to ion specificity, specific recognition of drugs by receptors and to macroscopic phenomena as nerve pulse propagation. However, lipid membranes in their chain melting regime are known to be highly permeable to ions, water and small molecules, and are therefore not always inert. In voltage-clamp experiments one finds quantized conduction events through protein-free membranes in their melting regime similar to or even undistinguishable from those attributed to proteins. This constitutes a conceptual problem for the interpretation of electrophysiological data obtained from biological membrane preparations. Here, we review the experimental evidence for lipid ion channels...

  12. Molecular ion photofragment spectroscopy

    International Nuclear Information System (INIS)

    A new molecular ion photofragment spectrometer is described which features a supersonic molecular beam ion source and a radio frequency octapole ion trap interaction region. This unique combination allows several techniques to be applied to the problem of detecting a photon absorption event of a molecular ion. In particular, it may be possible to obtain low resolution survey spectra of exotic molecular ions by using a direct vibrational predissociation process, or by using other more indirect detection methods. The use of the spectrometer is demonstrated by measuring the lifetime of the O2+(4π/sub u/) metastable state which is found to consist of two main components: the 4π/sub 5/2/ and 4π/sub -1/2/ spin components having a long lifetime (approx. 129 ms) and the 4π/sub 3/2/ and 4π/sub 1/2/ spin components having a short lifetime (approx. 6 ms)

  13. Ion Implantation of Polymers

    DEFF Research Database (Denmark)

    Popok, Vladimir

    2012-01-01

    The current paper presents a state-of-the-art review in the field of ion implantation of polymers. Numerous published studies of polymers modified by ion beams are analysed. General aspects of ion stopping, latent track formation and changes of structure and composition of organic materials...... are discussed. Related to that, the effects of radiothermolysis, degassing and carbonisation are considered. Specificity of depth distributions of implanted into polymers impurities is analysed and the case of high-fluence implantation is emphasised. Within rather broad topic of ion bombardment, the focus...... is put on the low-energy implantation of metal ions causing the nucleation and growth of nanoparticles in the shallow polymer layers. Electrical, optical and magnetic properties of metal/polymer composites are under the discussion and the approaches towards practical applications are overviewed....

  14. Ion-by-ion Cooling efficiencies

    CERN Document Server

    Gnat, Orly

    2011-01-01

    We present ion-by-ion cooling efficiencies for low-density gas. We use Cloudy (ver. 08.00) to estimate the cooling efficiencies for each ion of the first 30 elements (H-Zn) individually. We present results for gas temperatures between 1e4 and 1e8K, assuming low densities and optically thin conditions. When nonequilibrium ionization plays a significant role the ionization states deviate from those that obtain in collisional ionization equilibrium (CIE), and the local cooling efficiency at any given temperature depends on specific non-equilibrium ion fractions. The results presented here allow for an efficient estimate of the total cooling efficiency for any ionic composition. We also list the elemental cooling efficiencies assuming CIE conditions. These can be used to construct CIE cooling efficiencies for non-solar abundance ratios, or to estimate the cooling due to elements not explicitly included in any nonequilibrium computation. All the computational results are listed in convenient online tables.

  15. Nitrate ion association with Sm3+ ion

    International Nuclear Information System (INIS)

    A solvent extraction method with TBP as an extractant was used for the determination of the stability constants K10 for the SmNO32+ complex, for different least approach distances aa of ions. It was established that aa=6.5A for SmNO32+. (Author)

  16. Ion-Induced Surface Diffusion in Ion Sputtering

    OpenAIRE

    Makeev, Maxim A.; Barabasi, Albert-Laszlo

    1997-01-01

    Ion bombardment is known to enhance surface diffusion and affect the surface morphology. To quantify this phenomenon we calculate the ion-induced diffusion constant and its dependence on the ion energy, flux and angle of incidence. We find that ion bombardment can both enhance and suppress diffusion and that the sign of the diffusion constant depends on the experimental parameters. The effect of ion-induced diffusion on ripple formation and roughening of ion-sputtered surfaces is discussed an...

  17. The role of diet on long-term concentration and pattern trends of brominated and chlorinated contaminants in western Hudson Bay polar bears, 1991-2007.

    Science.gov (United States)

    McKinney, Melissa A; Stirling, Ian; Lunn, Nick J; Peacock, Elizabeth; Letcher, Robert J

    2010-11-15

    Adipose tissue was sampled from the western Hudson Bay (WHB) subpopulation of polar bears at intervals from 1991 to 2007 to examine temporal trends of PCB and OCP levels both on an individual and sum-(∑-)contaminant basis. We also determined levels and temporal trends of emerging polybrominated diphenyl ethers (PBDEs), hexabromocyclododecane (HBCD), polybrominated biphenyls (PBBs) and other current-use brominated flame retardants. Over the 17-year period, ∑DDT (and p,p'-DDE, p,p'-DDD, p,p'-DDT) decreased (-8.4%/year); α-hexachlorocyclohexane (α-HCH) decreased (-11%/year); β-HCH increased (+8.3%/year); and ∑PCB and ∑chlordane (CHL), both contaminants at highest concentrations in all years (>1ppm), showed no distinct trends even when compared to previous data for this subpopulation dating back to 1968. Some of the less persistent PCB congeners decreased significantly (-1.6%/year to -6.3%/year), whereas CB153 levels tended to increase (+3.3%/year). Parent CHLs (c-nonachlor, t-nonachlor) declined, whereas non-monotonic trends were detected for metabolites (heptachlor epoxide, oxychlordane). ∑chlorobenzene, octachlorostyrene, ∑mirex, ∑MeSO(2)-PCB and dieldrin did not significantly change. Increasing ∑PBDE levels (+13%/year) matched increases in the four consistently detected congeners, BDE47, BDE99, BDE100 and BDE153. Although no trend was observed, total-(α)-HBCD was only detected post-2000. Levels of the highest concentration brominated contaminant, BB153, showed no temporal change. As long-term ecosystem changes affecting contaminant levels may also affect contaminant patterns, we examined the influence of year (i.e., aging or "weathering" of the contaminant pattern), dietary tracers (carbon stable isotope ratios, fatty acid patterns) and biological (age/sex) group on congener/metabolite profiles. Patterns of PCBs, CHLs and PBDEs were correlated with dietary tracers and biological group, but only PCB and CHL patterns were correlated with year. DDT

  18. The role of diet on long-term concentration and pattern trends of brominated and chlorinated contaminants in western Hudson Bay polar bears, 1991-2007

    International Nuclear Information System (INIS)

    Adipose tissue was sampled from the western Hudson Bay (WHB) subpopulation of polar bears at intervals from 1991 to 2007 to examine temporal trends of PCB and OCP levels both on an individual and sum-(Σ-)contaminant basis. We also determined levels and temporal trends of emerging polybrominated diphenyl ethers (PBDEs), hexabromocyclododecane (HBCD), polybrominated biphenyls (PBBs) and other current-use brominated flame retardants. Over the 17-year period, Σ DDT (and p,p'-DDE, p,p'-DDD, p,p'-DDT) decreased (-8.4%/year); α-hexachlorocyclohexane (α-HCH) decreased (-11%/year); β-HCH increased (+ 8.3%/year); and Σ PCB and Σ chlordane (CHL), both contaminants at highest concentrations in all years (> 1 ppm), showed no distinct trends even when compared to previous data for this subpopulation dating back to 1968. Some of the less persistent PCB congeners decreased significantly (-1.6%/year to -6.3%/year), whereas CB153 levels tended to increase (+ 3.3%/year). Parent CHLs (c-nonachlor, t-nonachlor) declined, whereas non-monotonic trends were detected for metabolites (heptachlor epoxide, oxychlordane). Σ chlorobenzene, octachlorostyrene, Σ mirex, Σ MeSO2-PCB and dieldrin did not significantly change. Increasing Σ PBDE levels (+ 13%/year) matched increases in the four consistently detected congeners, BDE47, BDE99, BDE100 and BDE153. Although no trend was observed, total-(α)-HBCD was only detected post-2000. Levels of the highest concentration brominated contaminant, BB153, showed no temporal change. As long-term ecosystem changes affecting contaminant levels may also affect contaminant patterns, we examined the influence of year (i.e., aging or 'weathering' of the contaminant pattern), dietary tracers (carbon stable isotope ratios, fatty acid patterns) and biological (age/sex) group on congener/metabolite profiles. Patterns of PCBs, CHLs and PBDEs were correlated with dietary tracers and biological group, but only PCB and CHL patterns were correlated with year

  19. In vitro effects of selected brominated flame retardants on the adreno cortical enzyme (CYP17). A novel endocrine mechanism of action?

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez Canton, R.; Sanderson, T.; Nijmeijer, S.; Berg, M. van den [Utrecht Univ. (NL). Inst. for Risk Assessment Sciences (IRAS); Berkman, Aa. [Stockholm Univ. (Sweden). Dept. of Environmental Chemistry and Analytical Chemistry

    2004-09-15

    Fire incidents have decreased over the last 20 years partly due to regulations requiring addition of flame retardants (FRs) to materials. These compounds can be divided into different chemical classes: inorganic, nitrogen, phosphorus and halogen containing flame retardants (usually brominated or chlorinated). Not surprisingly, the use of brominated flame retardants (BFRs) in a variety of commercial and household products has increased over the years due to their low cost and high effectiveness. Consequence of the high production of BFRs is that these compounds are now readily detectable in air, water, birds, fish, marine mammals, and in human adipose tissue and blood. The five major BFRs are hexabromocyclododecane (HBCD), tetrabromobisphenol-A (TBBPA) and three commercial mixtures of polybrominated diphenyl ethers (PBDEs) (penta, octa, deca), which are extensively used as FRs at high production volume levels. In addition, concentrations of PBDEs concentration have been rapidly increasing during the last 10 years in human breast milk from European and American women and a number of endocrine (in vitro) effects have been reported. Consequently, the concern about BFRs and their metabolites with respect to their potential as endocrine disruptors (EDs) has been growing. Studies in our laboratory are focused on potential interactions of a wide range of BFRs with sex hormone synthesis and metabolism. Previous results from our research group, showed inhibitory and inductive effects on aromatase (CYP19) (the key enzyme that converts androgens to estrogens) by certain BFRs, in particular the hydroxylated PBDEs and several bromophenols. In the present study, the effects of ten of these BFRs on CYP17 activity were investigated. This enzyme also catalyzes an important step in the sex steroidogenesis and is responsible for the biosynthesis of dehydroepiandrosterone (DHEA). DHEA, produced in the adrenal gland, is the most abundant sex steroid hormone in human blood and has been

  20. Laser ion source for high brightness heavy ion beam

    Science.gov (United States)

    Okamura, M.

    2016-09-01

    A laser ion source is known as a high current high charge state heavy ion source. However we place great emphasis on the capability to realize a high brightness ion source. A laser ion source has a pinpoint small volume where materials are ionized and can achieve quite uniform low temperature ion beam. Those features may enable us to realize very small emittance beams. In 2014, a low charge state high brightness laser ion source was successfully commissioned in Brookhaven National Laboratory. Now most of all the solid based heavy ions are being provided from the laser ion source for regular operation.

  1. CdTe quantum dots functionalized with 4-amino-2,2,6,6-tetramethylpiperidine-N-oxide as luminescent nanoprobe for the sensitive recognition of bromide ion

    Energy Technology Data Exchange (ETDEWEB)

    Adegoke, Oluwasesan [Department of Chemistry, Rhodes University, Grahamstown 6140 (South Africa); Hosten, Eric; McCleland, Cedric [Department of Chemistry, Nelson Mandela Metropolitan University (South Campus), Port Elizabeth 6031 (South Africa); Nyokong, Tebello, E-mail: t.nyokong@ru.ac.za [Department of Chemistry, Rhodes University, Grahamstown 6140 (South Africa)

    2012-04-06

    Graphical abstract: A bromide ion-selective modified nanoprobe sensor based on 4-amino-2,2,6,6-tetramethylpiperidine-N-oxide (4AT)-functionalized CdTe quantum dots (QDs-4AT) showed a high selectivity and sensitivity for the determination of bromide ion using fluorescence recovery. Highlights: Black-Right-Pointing-Pointer Water soluble CdTe quantum dots interact with tetramethylpiperidine-N-oxide. Black-Right-Pointing-Pointer Quantum dots fluorescence is quenched by the radical. Black-Right-Pointing-Pointer In the presence of bromide ions the fluorescence is restored. Black-Right-Pointing-Pointer The sensor is more selective to bromine ions than other common ions. - Abstract: A novel bromide ion-selective modified nanoprobe sensor based on 4-amino-2,2,6,6-tetramethylpiperidine-N-oxide (4AT)-functionalized CdTe quantum dots (QDs-4AT) has been developed. Fluorescence quenching of the QDs by 4AT was observed. The functionalized QDs-4AT nanoprobe allowed a highly sensitive determination of bromide ion via analyte-induced change in the photoluminescence (fluorescence recovery) of the modified QDs. A detection limit of 0.6 nM of bromide ion was obtained, while the interfering effect of other inorganic cations and anions was investigated to examine the selectivity of the nanoprobe. The linear range was between 0.01 and 0.13 {mu}M. Combined fluorescence lifetime and electron paramagnetic resonance measurements confirmed electron transfer processes between bromide ion and QDs-4AT.

  2. Annealing effects and DLTS study on NPN silicon bipolar junction transistors irradiated by heavy ions

    Science.gov (United States)

    Liu, Chaoming; Li, Xingji; Yang, Jianqun; Rui, Erming

    2014-01-01

    Isochronal anneal sequences have been carried out on 3DG112 silicon NPN bipolar junction transistors (BJTs) irradiated with 20 MeV bromine (Br) heavy ions. The Gummel curve is utilized to characterize the annealing behavior of defects in both the emitter-base depletion region and the neutral base. We find that the base current (IB) decreases with the increasing annealing temperature, while the collector current (IC) remains invariable. The current gain varies slightly, when the annealing temperature (TA) is lower than 400 K, while varies rapidly at TAtransistor. Deep level transient spectroscopy (DLTS) data is used to assign the relative magnitude of each of the important defects. Based on the in situ electrical measurement and DLTS spectra, it is clear that the V2(-/0)+V-P traps are the main contribution to the degradation of current gain after the 20 MeV Br ions irradiation. The V2(-/0)+V-P peak has many of the characteristics expected for the current gain degradation.

  3. Annealing effects and DLTS study on NPN silicon bipolar junction transistors irradiated by heavy ions

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Chaoming; Li, Xingji, E-mail: lxj0218@hit.edu.cn; Yang, Jianqun; Rui, Erming

    2014-01-21

    Isochronal anneal sequences have been carried out on 3DG112 silicon NPN bipolar junction transistors (BJTs) irradiated with 20 MeV bromine (Br) heavy ions. The Gummel curve is utilized to characterize the annealing behavior of defects in both the emitter-base depletion region and the neutral base. We find that the base current (I{sub B}) decreases with the increasing annealing temperature, while the collector current (I{sub C}) remains invariable. The current gain varies slightly, when the annealing temperature (T{sub A}) is lower than 400 K, while varies rapidly at T{sub A}<450 K, and the current gain of the 3DG112 BJT annealing at 700 K almost restore to that of the pre-radiation transistor. Deep level transient spectroscopy (DLTS) data is used to assign the relative magnitude of each of the important defects. Based on the in situ electrical measurement and DLTS spectra, it is clear that the V{sub 2}(−/0)+V-P traps are the main contribution to the degradation of current gain after the 20 MeV Br ions irradiation. The V{sub 2}(−/0)+V-P peak has many of the characteristics expected for the current gain degradation.

  4. High performance ion chromatography of haloacetic acids on macrocyclic cryptand anion exchanger.

    Science.gov (United States)

    Bruzzoniti, Maria Concetta; De Carlo, Rosa Maria; Horvath, Krisztian; Perrachon, Daniela; Prelle, Ambra; Tófalvi, Renáta; Sarzanini, Corrado; Hajós, Péter

    2008-04-11

    A new high performance ion chromatographic method has been developed for the separation of the nine chlorinated-brominated haloacetic acids (HAAs) that are the disinfection by-products of chlorination of drinking water, using a macrocycle-based adjustable-capacity anion-exchange separator column (IonPac Cryptand A1). A gradient method based on theoretical and experimental considerations has been optimized in which 10 mM NaOH-LiOH step gradient was performed at the third minute of the analysis. The optimized method allowed us to separate the nine HAAs and seven possibly interfering inorganic anions in less than 25 min with acceptable resolution. The minimum concentrations detectable for HAAs were between 8.0 (MBA) and 210 (TBA) microg L(-1), with linearity included between 0.9947 (TBA) and 0.9998 (MBA). To increase sensitivity, a 25-fold preconcentration step on a reversed phase substrate (LiChrolut EN) has been coupled. Application of this method to the analysis of haloacetic acids in real tap water samples is illustrated.

  5. A track ion counter

    International Nuclear Information System (INIS)

    A method to measure the frequency of production of ions in a gas is described. The characteristics of a device, which is named a track ion counter, are presented. The counter consists of two cylindrical volumes separated by a diaphragm with 500μm dia. orifice. The device is connected to an oil diffusion pump with high pumping speed. The gas flow through the orifice determines the pressure in the upper and the lower volumes of the device. The positive ions produced in a cylindrical volume above an orifice by charged particles traversing that volume move in a constant electric field. Some of these ions passing through the orifice are accelerated and detected by an electron multiplier. The absolute efficiency of ions detection from the domain above the orifice have been determined. The measurements were carried out for single charged ions of N2, H2, CH4, CO2. The preliminary measurements of the frequency of ions created within cylindrical gas domain equivalent to 0.15nm dia. and 7.6nm height tissue cylinder are reported

  6. Polarized negative ions

    Energy Technology Data Exchange (ETDEWEB)

    Haeberli, W.

    1981-04-01

    This paper presents a survey of methods, commonly in use or under development, to produce beams of polarized negative ions for injection into accelerators. A short summary recalls how the hyperfine interaction is used to obtain nuclear polarization in beams of atoms. Atomic-beam sources for light ions are discussed. If the best presently known techniques are incorporated in all stages of the source, polarized H/sup -/ and D/sup -/ beams in excess of 10 ..mu..A can probably be achieved. Production of polarized ions from fast (keV) beams of polarized atoms is treated separately for atoms in the H(25) excited state (Lamb-Shift source) and atoms in the H(1S) ground state. The negative ion beam from Lamb-Shift sources has reached a plateau just above 1 ..mu..A, but this beam current is adequate for many applications and the somewhat lower beam current is compensated by other desirable characteristics. Sources using fast polarized ground state atoms are in a stage of intense development. The next sections summarize production of polarized heavy ions by the atomic beam method, which is well established, and by optical pumping, which has recently been demonstrated to yield very large nuclear polarization. A short discussion of proposed ion sources for polarized /sup 3/He/sup -/ ions is followed by some concluding remarks.

  7. Polarized negative ions

    International Nuclear Information System (INIS)

    This paper presents a survey of methods, commonly in use or under development, to produce beams of polarized negative ions for injection into accelerators. A short summary recalls how the hyperfine interaction is used to obtain nuclear polarization in beams of atoms. Atomic-beam sources for light ions are discussed. If the best presently known techniques are incorporated in all stages of the source, polarized H- and D- beams in excess of 10 μA can probably be achieved. Production of polarized ions from fast (keV) beams of polarized atoms is treated separately for atoms in the H(25) excited state (Lamb-Shift source) and atoms in the H(1S) ground state. The negative ion beam from Lamb-Shift sources has reached a plateau just above 1 μA, but this beam current is adequate for many applications and the somewhat lower beam current is compensated by other desirable characteristics. Sources using fast polarized ground state atoms are in a stage of intense development. The next sections summarize production of polarized heavy ions by the atomic beam method, which is well established, and by optical pumping, which has recently been demonstrated to yield very large nuclear polarization. A short discussion of proposed ion sources for polarized 3He- ions is followed by some concluding remarks

  8. Ion optics of RHIC electron beam ion source

    Energy Technology Data Exchange (ETDEWEB)

    Pikin, A.; Alessi, J.; Beebe, E.; Kponou, A.; Okamura, M.; Raparia, D.; Ritter, J.; Tan, Y. [Brookhaven National Laboratory, Upton, New York 11973 (United States); Kuznetsov, G. [Budker Institute of Nuclear Physics, Novosibirsk 630090 (Russian Federation)

    2012-02-15

    RHIC electron beam ion source has been commissioned to operate as a versatile ion source on RHIC injection facility supplying ion species from He to Au for Booster. Except for light gaseous elements RHIC EBIS employs ion injection from several external primary ion sources. With electrostatic optics fast switching from one ion species to another can be done on a pulse to pulse mode. The design of an ion optical structure and the results of simulations for different ion species are presented. In the choice of optical elements special attention was paid to spherical aberrations for high-current space charge dominated ion beams. The combination of a gridded lens and a magnet lens in LEBT provides flexibility of optical control for a wide range of ion species to satisfy acceptance parameters of RFQ. The results of ion transmission measurements are presented.

  9. Determination of Bromine in Brine by Wavelength Dispersive X-ray Fluorescence Spectrometry with Film Adsorption Pretreatment%薄膜吸附制样-波长色散X射线荧光光谱法测定卤水中的溴

    Institute of Scientific and Technical Information of China (English)

    陈景伟; 宋江涛; 赵庆令; 宋双喜; 汤云芝; 耿楠

    2015-01-01

    Bromine exists mainly as ions in bromide brine and halide sulfate brine in the hydrosphere of the crust. Powder carrier pellet method is commonly used in analyzing bromine in brine by Wavelength Dispersive X-ray Fluorescence Spectrometry( WDXRF). However,this sample preparation method has the disadvantages of large work load,sample inhomogeneity and outer contamination,which affects the analytical accuracy. Samples were pretreated by film adsorption,and film material and sample weight were optimized and are reported in this paper. Firstly,50μL of brine is dropped to the center of a chromatography filter paper(Ф=40 mm),air dried,and then flattened by high pressure to prepare the film sample for WDXRF test. A standard curve of Br was calibrated by self-prepared standard solution. Experimental results show that the impact of coexisting ions such as K﹢,Na﹢, Ca2﹢,Mg2﹢,Cl- and SO2-4 on the detection of Br is negligible. The detection limit of this method is 0. 95 mg/L, the precision is less than 0 . 8%( n=11 ),and the recoveries are 99 . 4% -101 . 2%. The new sample preparation method is very economical and easy to operate,avoiding the use of chemical reagent.%溴主要以离子形式分布在地壳水圈的溴化物型卤水、卤化物硫酸盐型卤水中,目前应用波长色散X射线荧光光谱( WDXRF)测定卤水中的溴,主要采用粉末载体压片法前处理待检样品,制样工作量大,制样均匀性和制样过程中的污染都会影响准确度,方法实用性不强。本文借助薄膜吸附前处理卤水样品,通过优化筛选薄膜材料及卤水取样量,确定移取50μL卤水样品滴于Ф=40 mm的3#层析滤纸的圆心位置,自然晾干后高压压平来前处理待检样品,采用人工配制标准样品校正溴的标准曲线,用WDXRF测定溴的含量。钾钠钙镁氯和硫酸根等共存离子的影响可以忽略,方法检出限(3σ)为0.95 mg/L,精密度(RSD,n=11)不大于0.8

  10. IN MEMORIAM ION VATAMANU

    Directory of Open Access Journals (Sweden)

    S.P. Palii

    2012-12-01

    Full Text Available A dreamer in his creative solitude, an objective and lucid analyst of history and contemporaneity, an energetic and decisive leader with an uncanny ability for crisis management – all these describe Ion Vatamanu. His wife Elena and daughters Mihaela, Mariana, Leontina treasure a personal universe in which the magical spark of Ion Vatamanu’s love and joy of life meld the everyday in and out of poetry. Ion Vatamanu’s instantaneous connection to the audiences and deeply felt words still touch the hearts of his many colleagues and friends. Downloads: 2

  11. Jet laser ion source

    International Nuclear Information System (INIS)

    External laser injector of multicharged ions (MCI) is developed in which wide-aperture aberration-free wire gauze spherical shape electrodes are applied for effective MCI extraction from laser plasma and beam focusing. Axial plasma compression by solenoid magnetic field is used to reduce ion losses due to transverse movement of the scattering laser plasma. Transverse magnetic field created by another solenoid facilitates the effective laser plasma braking and consequently, leads to the narrowing of energy spectrum of plasma ions and its shift towards lower energies. 2 refs.; 3 figs

  12. Photodetachment of relativistic ions

    International Nuclear Information System (INIS)

    A series of fundamental laser ion beam experiments has been made feasible by the high-quality, relativistic (β = 0.842) H- ion beam available at the Clinton P. Anderson Meson Physics Facility (LAMPF). The relatavistic Doppler shift of the light from an ordinary ultraviolet laser provides what is, in effect, a continuously tunable vacuum-ultraviolet laser in the rest frame of the moving ions. The Lorentz transformation of a modest laboratory magnetic field provides an electric field of several megavolts/centimeter. The latest results of photo-detachment work with H- beams and our spectroscopic work with H0 beams are presented. Plans for future work are discussed

  13. Carbon Ion Therapy

    DEFF Research Database (Denmark)

    Bassler, Niels; Hansen, David Christoffer; Herrmann, Rochus;

    On the importance of choice of target size for selective boosting of hypoxic tumor subvolumina in carbon ion therapy Purpose: Functional imaging methods in radiotherapy are maturing and can to some extent uncover radio resistant structures found within a tumour entity. Selective boost of identified...... effect. All cell lines investigated here did not reach an OER of 1, even for the smaller structures, which may indicate that the achievable dose average LET of carbon ions is too low, and heavier ions than carbon may be considered for functional LET-painting....

  14. Ion implantation technology

    CERN Document Server

    Downey, DF; Jones, KS; Ryding, G

    1993-01-01

    Ion implantation technology has made a major contribution to the dramatic advances in integrated circuit technology since the early 1970's. The ever-present need for accurate models in ion implanted species will become absolutely vital in the future due to shrinking feature sizes. Successful wide application of ion implantation, as well as exploitation of newly identified opportunities, will require the development of comprehensive implant models. The 141 papers (including 24 invited papers) in this volume address the most recent developments in this field. New structures and possible approach

  15. Heavy ion physics

    International Nuclear Information System (INIS)

    The international school-seminar on heavy ion physics had been organized in Dubna in may of 1993. The scientific program of reports covers the following main topics: synthesis and properties of heavy nuclei; synthesis and investigation of properties of exotic nuclei; experiments with radioactive nuclear beams; interaction between complex nuclei at low and intermediate energies. It also includes reports on laser spectroscopy and exotic nuclear beams, on some application of heavy ion beams for the problems of solid state physics, on construction of multidetector facilities and on developing of heavy ion accelerator complexes. Short communication

  16. Role of bromine doping on the photovoltaic properties and microstructures of CH{sub 3}NH{sub 3}PbI{sub 3} perovskite solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, Atsushi; Okada, Hiroshi; Oku, Takeo [Department of Materials Science, The University of Shiga Prefecture 2500 Hassaka, Hikone, Shiga, 522-8533 (Japan)

    2016-02-01

    Organic-inorganic hybrid heterojunction solar cells containing CH{sub 3}NH{sub 3}PbI{sub 3} perovskite compound were fabricated using mesoporous TiO{sub 2} as the electronic transporting layer and spirobifluorence as the hole-transporting layer. The purpose of the present study is to investigate role of bromine (Br) doping on the photovoltaic properties and microstructure of CH{sub 3}NH{sub 3}PbI{sub 3} perovskite solar cells. Photovoltaic, optical properties and microstructures of perovskite-based solar cells were investigated. The X-ray diffraction identified crystal structure of the perovskite layer doped with Br in the solar cell. Scanning electron microscopy observation showed a different behavior of surface morphology and the perovskite crystal structure on the TiO{sub 2} mesoporous structure depending on extent amount of hydrogen doping of Br. The role of bromide halogen doping on the perovskite crystal structure and photovoltaic properties was due to improvement of carrier mobility, optimization of electron structure, band gap related with the photovoltaic parameters of V{sub oc}, J{sub sc} and η. Energy diagram and photovoltaic mechanism of the perovskite solar cells varied with halogen doping was discussed by experimental results.

  17. Role of bromine doping on the photovoltaic properties and microstructures of CH3NH3PbI3 perovskite solar cells

    International Nuclear Information System (INIS)

    Organic-inorganic hybrid heterojunction solar cells containing CH3NH3PbI3 perovskite compound were fabricated using mesoporous TiO2 as the electronic transporting layer and spirobifluorence as the hole-transporting layer. The purpose of the present study is to investigate role of bromine (Br) doping on the photovoltaic properties and microstructure of CH3NH3PbI3 perovskite solar cells. Photovoltaic, optical properties and microstructures of perovskite-based solar cells were investigated. The X-ray diffraction identified crystal structure of the perovskite layer doped with Br in the solar cell. Scanning electron microscopy observation showed a different behavior of surface morphology and the perovskite crystal structure on the TiO2 mesoporous structure depending on extent amount of hydrogen doping of Br. The role of bromide halogen doping on the perovskite crystal structure and photovoltaic properties was due to improvement of carrier mobility, optimization of electron structure, band gap related with the photovoltaic parameters of Voc, Jsc and η. Energy diagram and photovoltaic mechanism of the perovskite solar cells varied with halogen doping was discussed by experimental results

  18. Magnetic solid-phase extraction of brominated flame retardants from environmental waters with graphene-doped Fe3O4 nanocomposites.

    Science.gov (United States)

    Yang, Jing; Qiao, Jun-qin; Cui, Shi-hai; Li, Jia-yuan; Zhu, Jin-jin; Yin, He-xing; Zhan, Cheng-yan; Lian, Hong-zhen

    2015-06-01

    Graphene-doped Fe3O4 nanocomposites were prepared by a solvothermal reaction of an iron source with graphene. The nanocomposites were characterized by transmission electron microscopy, atomic force microscopy, X-ray diffraction, superconducting quantum interference, Raman spectroscopy, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. This nanomaterial has been used as a magnetic solid-phase extraction sorbent to extract trace brominated flame retardants from environmental waters. Various extraction parameters were optimized including dosage and reusability of the nanocomposites, and pH of sample matrix. The reliability of the magnetic solid-phase extraction protocol based on graphene-doped Fe3O4 nanocomposites was evaluated by investigating the recoveries of 2,4,6-tribromophenol, tetrabromobisphenol A, 4-bromodiphenyl ether, and 4,4'-dibromodiphenyl ether in water samples. Good recoveries (85.0-105.0%) were achieved with the relative standard deviation ranging from 1.1-7.1%. Moreover, it is speculated from characterization and magnetic solid-phase extraction experiment that there is not only π-π stacking but also possible hydrophobic interaction between the graphene-doped Fe3O4 nanocomposites and analytes. PMID:25820830

  19. Antibacterial Properties of Tough and Strong Electrospun PMMA/PEO Fiber Mats Filled with Lanasol—A Naturally Occurring Brominated Substance

    Directory of Open Access Journals (Sweden)

    Richard L. Andersson

    2014-09-01

    Full Text Available A new type of antimicrobial, biocompatible and toughness enhanced ultra-thin fiber mats for biomedical applications is presented. The tough and porous fiber mats were obtained by electrospinning solution-blended poly (methyl methacrylate (PMMA and polyethylene oxide (PEO, filled with up to 25 wt % of Lanasol—a naturally occurring brominated cyclic compound that can be extracted from red sea algae. Antibacterial effectiveness was tested following the industrial Standard JIS L 1902 and under agitated medium (ASTM E2149. Even at the lowest concentrations of Lanasol, 4 wt %, a significant bactericidal effect was seen with a 4-log (99.99% reduction in bacterial viability against S. aureus, which is one of the leading causes of hospital-acquired (nosocomial infections in the world. The mechanical fiber toughness was insignificantly altered up to the maximum Lanasol concentration tested, and was for all fiber mats orders of magnitudes higher than electrospun fibers based on solely PMMA. This antimicrobial fiber system, relying on a dissolved antimicrobial agent (demonstrated by X-ray diffraction and Infrared (IR-spectroscopy rather than a dispersed and “mixed-in” solid antibacterial particle phase, presents a new concept which opens the door to tougher, stronger and more ductile antimicrobial fibers.

  20. Brominated flame retardants, hexabromocyclododecane and tetrabromobisphenol A, affect proinflammatory protein expression in human bronchial epithelial cells via disruption of intracellular signaling.

    Science.gov (United States)

    Koike, Eiko; Yanagisawa, Rie; Takano, Hirohisa

    2016-04-01

    Hexabromocyclododecane (HBCD) and tetrabromobisphenol A (TBBPA) are widely used as brominated flame retardants (BFRs) in consumer products. Because humans can be exposed to BFRs mainly through air or dust, the effects of the BFRs on the respiratory system and the underlying mechanisms were investigated. HBCD exposure significantly increased the expression of intercellular adhesion molecule (ICAM)-1 and the production of interleukin (IL)-6 and -8 in human bronchial epithelial cells (BEAS-2B). TBBPA exposure significantly increased the expression of ICAM-1 and IL-6, but not IL-8. HBCD and TBBPA stimulated epidermal growth factor (EGF) production and EGF receptor (EGFR) phosphorylation. Inhibitors of EGFR-selective tyrosine kinase and the subsequent mitogen-activated protein kinase effectively blocked the increase in the expression of proinflammatory proteins. The activation of nuclear factor-kappa B (p50, p65) and activator protein 1 (c-Jun) was also observed following HBCD exposure. Furthermore, the modulation for nuclear receptors was investigated. TBBPA but not HBCD showed ligand activity for thyroid hormone receptor (TR) and TR antagonist significantly suppressed the TBBPA-induced increase of the expression of ICAM-1 and IL-6. In conclusion, HBCD and TBBPA can disrupt the expression of proinflammatory proteins in bronchial epithelial cells, possibly via the modulation of EGFR-related pathways and/or nuclear receptors. PMID:26718265

  1. The brominated flame retardants TBP-AE and TBP-DBPE antagonize the chicken androgen receptor and act as potential endocrine disrupters in chicken LMH cells.

    Science.gov (United States)

    Asnake, Solomon; Pradhan, Ajay; Kharlyngdoh, Joubert Banjop; Modig, Carina; Olsson, Per-Erik

    2015-12-01

    Increased exposure of birds to endocrine disrupting compounds has resulted in developmental and reproductive dysfunctions. We have recently identified the flame retardants, allyl-2,4,6-tribromophenyl ether (TBP-AE), 2-3-dibromopropyl-2,4,6-tribromophenyl ether (TBP-DBPE) and the TBP-DBPE metabolite 2-bromoallyl-2,4,6-tribromophenyl ether (TBP-BAE) as antagonists to both the human androgen receptor (AR) and the zebrafish AR. In the present study, we aimed at determining whether these compounds also interact with the chicken AR. In silico modeling studies showed that TBP-AE, TBP-BAE and TBP-DBPE were able to dock into to the chicken AR ligand-binding pocket. In vitro transfection assays revealed that all three brominated compounds acted as chicken AR antagonists, inhibiting testosterone induced AR activation. In addition, qRT-PCR studies confirmed that they act as AR antagonists and demonstrated that they also alter gene expression patterns of apoptotic, anti-apoptotic, drug metabolizing and amino acid transporter genes. These studies, using chicken LMH cells, suggest that TBP-AE, TBP-BAE and TBP-DBPE are potential endocrine disrupters in chicken.

  2. Synthesis and antimicrobial evaluation of some novel 2-imino-3-(4′-carboxamido pyridyl-5-arylidene-4-thiazolidinones and their brominated derivatives

    Directory of Open Access Journals (Sweden)

    Mishra P

    2007-01-01

    Full Text Available Various novel 2-Imino-3-(4′-carboxamidopyridyl-5-arylidene-4-thiazolidinones, structurally related to isonicotinic acid hydrazide (isoniazid were synthesized and evaluated for their antimicrobial and antifungal activities together with their brominated products. Structure of the synthesized compounds was confirmed by means of their IR, 1 H-NMR spectral data and elemental analysis. Investigation of antimicrobial and antifungal activities of compounds was done by liquid dilution method used for the determination of minimum inhibitory concentration. Bacterial strains of Escherichia coli and Staphylococcus aureus and fungal strains of Aspergillus niger and Candida albicans were used to ascertain the activity whereas norfloxacin and amphotericin B was used as the standard positive control for antibacterial and antifungal activities respectively. MIC of the compounds ranged between 6-16 μg/ml and 7-24 μg/ml for antibacterial and antifungal activities respectively. Some of the synthesised compounds showed potent biological activities and were comparable to the standard. Important outcome of the exhaustive screening of all the new candidates in the present experiment was that the introduction of arylidene nuclei at position 5 of the 4-thiazolidinone nucleus significantly improved the biological activity.

  3. Simultaneous determination of 16 brominated flame retardants in food and feed of animal origin by fast gas chromatography coupled to tandem mass spectrometry using atmospheric pressure chemical ionisation.

    Science.gov (United States)

    Bichon, E; Guiffard, I; Vénisseau, A; Lesquin, E; Vaccher, V; Brosseaud, A; Marchand, P; Le Bizec, B

    2016-08-12

    A gas chromatography tandem mass spectrometry method using atmospheric pressure chemical ionisation was developed for the monitoring of 16 brominated flame retardants (7 usually monitored polybromodiphenylethers (PBDEs) and BDE #209 and 8 additional emerging and novel BFRs) in food and feed of animal origin. The developed analytical method has decreased the run time by three compared to conventional strategies, using a 2.5m column length (5% phenyl stationary phase, 0.1mm i.d., 0.1μmf.t.), a pulsed split injection (1:5) with carrier gas helium flow rate at 0.48mLmin(-1) in one run of 20 min. For most BFRs, analytical data were compared with the current analytical strategy relying on GC/EI/HRMS (double sector, R=10000 at 10% valley). Performances in terms of sensitivity were found to meet the Commission recommendation (118/2014/EC) for nBFRs. GC/APCI/MS/MS represents a promising alternative for multi-BFRs analysis in complex matrices, in that it allows the monitoring of a wider list of contaminants in a single injection and a shorter run time.

  4. Simultaneous determination of 16 brominated flame retardants in food and feed of animal origin by fast gas chromatography coupled to tandem mass spectrometry using atmospheric pressure chemical ionisation.

    Science.gov (United States)

    Bichon, E; Guiffard, I; Vénisseau, A; Lesquin, E; Vaccher, V; Brosseaud, A; Marchand, P; Le Bizec, B

    2016-08-12

    A gas chromatography tandem mass spectrometry method using atmospheric pressure chemical ionisation was developed for the monitoring of 16 brominated flame retardants (7 usually monitored polybromodiphenylethers (PBDEs) and BDE #209 and 8 additional emerging and novel BFRs) in food and feed of animal origin. The developed analytical method has decreased the run time by three compared to conventional strategies, using a 2.5m column length (5% phenyl stationary phase, 0.1mm i.d., 0.1μmf.t.), a pulsed split injection (1:5) with carrier gas helium flow rate at 0.48mLmin(-1) in one run of 20 min. For most BFRs, analytical data were compared with the current analytical strategy relying on GC/EI/HRMS (double sector, R=10000 at 10% valley). Performances in terms of sensitivity were found to meet the Commission recommendation (118/2014/EC) for nBFRs. GC/APCI/MS/MS represents a promising alternative for multi-BFRs analysis in complex matrices, in that it allows the monitoring of a wider list of contaminants in a single injection and a shorter run time. PMID:27425757

  5. Some commonly used brominated flame retardants cause Ca2+-ATPase inhibition, beta-amyloid peptide release and apoptosis in SH-SY5Y neuronal cells.

    Directory of Open Access Journals (Sweden)

    Fawaz Al-Mousa

    Full Text Available Brominated flame retardants (BFRs are chemicals commonly used to reduce the flammability of consumer products and are considered pollutants since they have become widely dispersed throughout the environment and have also been shown to bio-accumulate within animals and man. This study investigated the cytotoxicity of some of the most commonly used groups of BFRs on SH-SY5Y human neuroblastoma cells. The results showed that of the BFRs tested, hexabromocyclododecane (HBCD, tetrabromobisphenol-A (TBBPA and decabromodiphenyl ether (DBPE, all are cytotoxic at low micromolar concentrations (LC(50 being 2.7 ± 0.7 µM, 15 ± 4 µM and 28 ± 7 µM, respectively. They induced cell death, at least in part, by apoptosis through activation of caspases. They also increased intracellular [Ca(2+] levels and reactive-oxygen-species within these neuronal cells. Furthermore, these BFRs also caused rapid depolarization of the mitochondria and cytochrome c release in these neuronal cells. Elevated intracellular [Ca(2+] levels appear to occur through a mechanism involving microsomal Ca(2+-ATPase inhibition and this maybe responsible for Ca(2+-induced mitochondrial dysfunction. In addition, µM levels of these BFRs caused β-amyloid peptide (Aβ-42 processing and release from these cells with a few hours of exposure. These results therefore shows that these pollutants are both neurotoxic and amyloidogenic in-vitro.

  6. Advance in Researches on Toxicology of Brominated Flame Retardants%溴系阻燃剂的毒理学研究进展

    Institute of Scientific and Technical Information of China (English)

    杜苗苗; 张娴; 颜昌宙

    2012-01-01

    溴系阻燃剂(brominated flame retardants,BFRs)广泛应用于塑料、电子、建筑、纺织等材料和产品中,在多种环境介质中都可以检测到BFRs的存在.目前市场上的溴系阻燃剂主要有3种:四溴双酚A(tetrabromobisphenol A,TBBPA)、多溴联苯醚(polybrominated diphenyl ethers,PBDEs)和六溴环十二烷(hexabromocyclododecanes,HBCDs).近年来,进入环境中的BFRs在数量和种类上迅速增加,由此引发的环境效应日益受到国际社会广泛关注,有关BFRs的毒理学研究也成为相关领域的焦点内容.在总结近年来国内外相关研究的基础上,就BFRs在内分泌干扰效应、肝脏毒性、生殖毒性和神经毒性等方面的研究现状及需要进一步研究的内容进行了综述.

  7. Characterization of heavy metals and brominated flame retardants in the indoor and outdoor dust of e-waste workshops: implication for on-site human exposure.

    Science.gov (United States)

    Xu, Feng; Liu, Yangcheng; Wang, Junxia; Zhang, Gang; Zhang, Wei; Liu, Lili; Wang, Jinfu; Pan, Bishu; Lin, Kuangfei

    2015-04-01

    Forty-four indoor and outdoor dust samples were collected from e-waste workshops and were analyzed to characterize the heavy metals and brominated flame retardants (BFRs) as well as on-site human exposure. The results showed that the most abundant Polybrominated diphenyl ethers (PBDE) congener from three sites was deca-BDE, and it was penta-BDE for the other site. A significant and positive association was found between BDE-209 and decabromodiphenyl ethane (DBDPE). The high percentage of nona-BDE indicated the debromination of deca-BDE during e-waste recycling. The ratio comparison of BDE-47 to (BDE-100 + BDE-99) indicated that the outdoor dust went through more physiochemical processes. The enrichment factors for Cu and Pb were high in both the indoor and outdoor samples. Cd significantly exceeded the Chinese soil guideline grade III. The PCA results combined with the enrichment factor (EF) values suggested common sources and behaviours of Cu, Pb and Sb in the indoor dust. Co, Cr, Ni, Zn and Mn in the outdoor samples were more likely affected by crust. Strong correlations were found only for Pb and Sb with polybrominated diphenyl ethers (PBDEs). The hazard index for on-site human exposure to Pb was at a chronic risk. Despite the low deleterious risk of BFRs, concern should be given to DBDPE; the chronic toxicity of which is not known.

  8. Comparative study on stability and coke deposition over supported Rh and FePO4 catalysts for oxy-bromination of methane

    Institute of Scientific and Technical Information of China (English)

    Ronghe; Lin; Yunjie; Ding; Runqin; Wang

    2014-01-01

    Rhodium- and iron phosphate-based catalysts are by far the most promising catalysts for oxy-bromination of methane(OBM) reaction. However, most literature reported either Rh- or FePO4-based catalysts, and the results were rarely studied in a uniform environmental condition. In this report, comparative study was conducted on silica- and silicon carbide-supported rhodium and iron phosphate catalysts with the main focuses on stability performance and coke deposition. The catalytic results demonstrated that the stability of both Rh- and FePO4-based catalysts was greatly influenced by the supports used, and silicon carbide-supported catalysts showed much better anti-coking ability as compared with silica-supported ones. Temperature-programmed oxidation over the used catalysts further indicated that the coke formation mechanisms were completely different between silica-supported rhodium and iron phosphate catalysts. While cokes might be caused by condensation of CH2Br2over supported iron phosphate, methane decomposition might be the reason for coke formation over silica-supported rhodium catalyst. These findings might pave the way for designing highly efficient and stable catalysts of the OBM reaction.

  9. Effects of ozone pretreatment on the formation of disinfection by-products and its associated bromine substitution factors upon chlorination/chloramination of Tai Lake water.

    Science.gov (United States)

    Wang, Fangyuan; Ruan, Mengyong; Lin, Hongjun; Zhang, Yu; Hong, Huachang; Zhou, Xiaoling

    2014-03-15

    This study investigated the effects of preozonation on disinfection by-products (DBPs) formation during chlorination and chloramination of the water collected from Tai Lake. Results showed that the high ozone dose (0.6-1.0 mg O₃/mg DOC) pretreatment reduced the yields of trihaloacetic acids (reduced 62-63% in chlorination), dihaloacetonitriles (reduced 53-55% and 14-26% in chlorination and chloramination, respectively) and trihaomethanes (reduced 19% in chloramination), but markedly increased the formation of halonitromethanes (increased 4.7-5.6 times in chlorination and 2.1-2.7 times in chloramination), haloketones (increased 4.8-7.1 times in chlorination and 2.5-2.9 times in chloramination) and dihaloacetic acids (increased 1.5-2.4 times in chlorination and 0.3-0.6 times in chloramination). Thus the high ozone dose pretreatment should be avoided during chlorination/chloramination of Tai Lake water. Also, chloramination (with and without preozonation) produced much lower DBPs yields as compared with chlorination (with and without preozonation), indicating that chloramine was a better choice to control the DBPs yields. Further analysis also revealed that the bromine substitution factors (BSFs) of DBPs varied with disinfection mode. In chlorinamination, the BSFs generally showed a decrease trend with the ozone dose, yet in chlorination, the BSFs mostly exhibited first an increase and then a decrease trend. Moreover, the BSFs of DBPs in chloramination (with or without preozonation) were dominantly lower than those in chlorination (with or without preozonation).

  10. Brominated flame retardants and organochlorine pollutants in aquatic and terrestrial predatory birds of Belgium: levels, patterns, tissue distribution and condition factors

    Energy Technology Data Exchange (ETDEWEB)

    Jaspers, V.L.B. [Department of Biology, University of Antwerp, Campus Drie Eiken, Universiteitsplein 1, 2610 Wilrijk (Belgium)]. E-mail: veerle.jaspers@ua.ac.be; Covaci, A. [Toxicological Centre, University of Antwerp, Campus Drie Eiken, Universiteitsplein 1, 2610 Wilrijk (Belgium); Voorspoels, S. [Toxicological Centre, University of Antwerp, Campus Drie Eiken, Universiteitsplein 1, 2610 Wilrijk (Belgium); Dauwe, T. [Department of Biology, University of Antwerp, Campus Drie Eiken, Universiteitsplein 1, 2610 Wilrijk (Belgium); Eens, M. [Department of Biology, University of Antwerp, Campus Drie Eiken, Universiteitsplein 1, 2610 Wilrijk (Belgium); Schepens, P. [Toxicological Centre, University of Antwerp, Campus Drie Eiken, Universiteitsplein 1, 2610 Wilrijk (Belgium)

    2006-01-15

    Liver and muscle samples from 7 species of aquatic and terrestrial predatory birds from Flanders (Belgium) were analysed for polychlorinated biphenyls (PCBs), polybrominated diphenylethers (PBDEs) and organochlorine pesticides (OCPs). PCBs were the predominant compounds in our samples, which showed highest concentrations in the liver of barn owl (Tyto alba) and sparrowhawk (Accipiter nisus) (up to 1000 {mu}g/g lipid weight). PBDEs could be determined in most samples at lower concentrations than PCBs (up to 64 {mu}g/g lipid in sparrowhawk liver). Sparrowhawks had the highest levels of hexachlorobenzene, DDTs and PBDEs. In contrast, kestrels (Falco tinnunculus) had relatively low levels of most measured organochlorines. BDE 47 was the most abundant congener in heron (Ardea cinerea) and grebe (Podiceps cristatus), while BDE 47, 99 and 153 were equally important in the terrestrial species. BDE 183 and BDE 209 were only measured in the terrestrial birds. These results indicate that terrestrial birds may be more exposed to higher brominated BDE congeners than aquatic species. - Aquatic and terrestrial predatory birds show different accumulation profiles of PBDEs.

  11. EPR of uranium ions

    International Nuclear Information System (INIS)

    A review of the electron paramagnetic resonance data on the uranium ions is given. After a general account of the electronic structure of the uranium free atoms and ions, the influence of the external fields (magnetic field, crystal fields) is discussed. The main information obtained from EPR studies on the uranium ions in crystals are emphasized: identification of the valence and of the ground electronic state, determination of the structure of the centers, crystal field effects, role of the intermediate coupling and of the J-mixing, role of the covalency, determination of the nuclear spin, maqnetic dipole moment and electric quadrupole moment of the odd isotopes of uranium. These data emphasize the fact that the actinide group has its own identity and this is accutely manifested at the beginning of the 5fsup(n) series encompassed by the uranium ions. (authors)

  12. Ion exchange phenomena

    Energy Technology Data Exchange (ETDEWEB)

    Bourg, I.C.; Sposito, G.

    2011-05-01

    Ion exchange phenomena involve the population of readily exchangeable ions, the subset of adsorbed solutes that balance the intrinsic surface charge and can be readily replaced by major background electrolyte ions (Sposito, 2008). These phenomena have occupied a central place in soil chemistry research since Way (1850) first showed that potassium uptake by soils resulted in the release of an equal quantity of moles of charge of calcium and magnesium. Ion exchange phenomena are now routinely modeled in studies of soil formation (White et al., 2005), soil reclamation (Kopittke et al., 2006), soil fertilitization (Agbenin and Yakubu, 2006), colloidal dispersion/flocculation (Charlet and Tournassat, 2005), the mechanics of argillaceous media (Gajo and Loret, 2007), aquitard pore water chemistry (Tournassat et al., 2008), and groundwater (Timms and Hendry, 2007; McNab et al., 2009) and contaminant hydrology (Chatterjee et al., 2008; van Oploo et al., 2008; Serrano et al., 2009).

  13. Ion plasma electron gun

    International Nuclear Information System (INIS)

    In the disclosed electron gun positive ions generated by a hollow cathode plasma discharge in a first chamber are accelerated through control and shield grids into a second chamber containing a high voltage cold cathode. These positive ions bombard a surface of the cathode causing the cathode to emit secondary electrons which form an electron beam having a distribution adjacent to the cathode emissive surface substantially the same as the distribution of the ion beam impinging upon the cathode. After passing through the grids and the plasma discharge chamber, the electron beam exits from the electron gun via a foil window. Control of the generated electron beam is achieved by applying a relatively low control voltage between the control grid and the electron gun housing (which resides at ground potential) to control the density of the positive ions bombarding the cathode

  14. Ion Mass Determination

    DEFF Research Database (Denmark)

    2010-01-01

    An apparatus (100) is described for determining the mass of ions, the apparatus configured to hold a plasma (101 ) having a plasma potential. The apparatus (100) comprises an electrode (102) having a surface extending in a surface plane and an insulator (104) interfacing with the electrode (102...... to provide a magnetic field (B) across at least part of the curved potential distribution in the plasma surrounding the electrode (102). An ion impact detector (108) is configured to detect impacts of ions arriving at the electrode (102), the detecting comprising detecting of locations of the impacts......, and a processing unit (108) configured to interpret the detected impact locations in terms of the mass of the impacting ions....

  15. Ion manipulation device

    Science.gov (United States)

    Anderson, Gordon A; Smith, Richard D; Ibrahim, Yehia M; Baker, Erin M

    2014-09-16

    An ion manipulation method and device is disclosed. The device includes a pair of substantially parallel surfaces. An array of inner electrodes is contained within, and extends substantially along the length of, each parallel surface. The device includes a first outer array of electrodes and a second outer array of electrodes. Each outer array of electrodes is positioned on either side of the inner electrodes, and is contained within and extends substantially along the length of each parallel surface. A DC voltage is applied to the first and second outer array of electrodes. A RF voltage, with a superimposed electric field, is applied to the inner electrodes by applying the DC voltages to each electrode. Ions either move between the parallel surfaces within an ion confinement area or along paths in the direction of the electric field, or can be trapped in the ion confinement area.

  16. Cluster ion beam evaporation

    International Nuclear Information System (INIS)

    Cluster ions can be made by the supercooling due to adiabatic expansion of substances to be vaporized which are ejected from a nozzle. This paper is described on the recent progress of studies concerning the cluster beam. The technique of cluster ion beam has been applied for the studies of thermonuclear plasma, the fabrication of thin films, crystal growth and electronic devices. The density of cluster ion beam is larger than that of atomic ion beam, and the formation of thin films can be easily done in high vacuum. This method is also useful for epitaxial growth. Metallic vapour cluster beam was made by the help of jetting rare gas beam. Various beam sources were developed. The characteristics of these sources were measured and analyzed. (Kato, T.)

  17. Sensing with Ion Channels

    CERN Document Server

    Martinac, Boris

    2008-01-01

    All living cells are able to detect and translate environmental stimuli into biologically meaningful signals. Sensations of touch, hearing, sight, taste, smell or pain are essential to the survival of all living organisms. The importance of sensory input for the existence of life thus justifies the effort made to understand its molecular origins. Sensing with Ion Channels focuses on ion channels as key molecules enabling biological systems to sense and process the physical and chemical stimuli that act upon cells in their living environment. Its aim is to serve as a reference to ion channel specialists and as a source of new information to non specialists who want to learn about the structural and functional diversity of ion channels and their role in sensory physiology.

  18. Ion exchange equilibrium constants

    CERN Document Server

    Marcus, Y

    2013-01-01

    Ion Exchange Equilibrium Constants focuses on the test-compilation of equilibrium constants for ion exchange reactions. The book first underscores the scope of the compilation, equilibrium constants, symbols used, and arrangement of the table. The manuscript then presents the table of equilibrium constants, including polystyrene sulfonate cation exchanger, polyacrylate cation exchanger, polymethacrylate cation exchanger, polysterene phosphate cation exchanger, and zirconium phosphate cation exchanger. The text highlights zirconium oxide anion exchanger, zeolite type 13Y cation exchanger, and

  19. Radio frequency ion source

    CERN Document Server

    Shen Guan Ren; Gao Fu; LiuNaiYi

    2001-01-01

    The study on Radio Frequency Ion Source is mainly introduced, which is used for CIAE 600kV ns Pulse Neutron Generator; and obtained result is also presented. The RF ion source consists of a diameter phi 25 mm, length 200 mm, coefficient of expansion =3.5 mA, beam current on target >=1.5 mA, beam spot =100 h.

  20. Physics of Ion Channels

    OpenAIRE

    Kuyucak, Serdar; Bastug, Turgut

    2003-01-01

    We review the basic physics involved in transport of ions across membrane channels in cells. Electrochemical forces that control the diffusion of ions are discussed both from microscopic and macroscopic perspectives. A case is made for use of Brownian dynamics as the minimal phenomenological model that provides a bridge between experiments and more fundamental theoretical approaches. Application of Brownian and molecular dynamics methods to channels with known molecular structures is discussed.