WorldWideScience

Sample records for bridging user requirements

  1. Bridging User Requirements and Cultural Objects

    DEFF Research Database (Denmark)

    Hadzilias, Elias; Carugati, Andrea

    2009-01-01

    This chapter aims at defining a framework for the design of e-Government services on cultural heritage. Starting from an analysis of three cases on digitisation of different types of cultural objects the author highlights the problems existing in the creation of e-services on cultural heritage....... These cases show the existence of four key issues in the development of this kind of information systems: digitisation, requirements engineering, standardisation and interoperability. The proposed framework addresses these issues focusing on the user requirements and the cultural object representation...

  2. User Expressions Translated Into Requirements

    Directory of Open Access Journals (Sweden)

    Birgitta Bergvall-Kåreborn

    2010-01-01

    Full Text Available Grounding the development of mobile and ubiquitous services on actual needs and behaviors of users, rather than on designers' intuition, is a well-established tradition. However, gathering data about users in different contexts usually results in large amounts of data that have to be analyzed and translated into requirements. This crucial activity and its outcome are often shaped by the preconceptions of the developers or researchers. Despite this subjectivity, the translation process is seldom transparent. The aim of this paper, therefore, is to contribute to the field by presenting a process for translating user expressions into needs and later into requirements using Reiss' taxonomy of human needs. By adopting this process of translation, we were able to identify two hierarchical levels of needs: needs of a service and needs in a service. These two levels provide a transparent bridge between user expressions and system requirements.

  3. User Requirements for Wireless

    DEFF Research Database (Denmark)

    huge problems with the final product. The elicitation of user requirements as such changes according to age groups;, to gender,; to cultural settings,; and into time; and experience in the use of the system/software. User requirements, therefore, cannot be used between projects, IT systems, and...

  4. Bridging Flows: Microfluidic End‐User Solutions

    OpenAIRE

    Sabourin, David; Dufva, Martin; Snakenborg, Detlef

    2010-01-01

    Microfluidic applications hold promise for many different end‐users both within and outside, and across many different research communities. Despite the benefits of microfluidic approaches, adoption and implementation thereof is often hindered by practical issues. Microfluidic components which are more reliable and robust, and which address practical issues are required to encourage and allow non‐expert users, those not familiar with microfluidic fabrication methods, to adopt microfluidic app...

  5. Bridging Flows: Microfluidic End‐User Solutions

    DEFF Research Database (Denmark)

    Sabourin, David

    Microfluidic applications hold promise for many different end‐users both within and outside, and across many different research communities. Despite the benefits of microfluidic approaches, adoption and implementation thereof is often hindered by practical issues. Microfluidic components which are...... more reliable and robust, and which address practical issues are required to encourage and allow non‐expert users, those not familiar with microfluidic fabrication methods, to adopt microfluidic approaches. The first practical challenge encountered by users of microfluidics is the creation of...... interconnections between microfluidic devices and the outside world. This challenge results from the lack of standards for interconnecting components and the scale disparity between typical microfluidic channel dimensions, microns to hundreds of microns, and the “macro” methods required to address these channels...

  6. Managing concrete bridges: Methods for reducing costs and user inconveniences

    DEFF Research Database (Denmark)

    Goltermann, Per

    . These approaches are focused on cost reductions, but must as well lead to a reduction of the user inconveniences (traffic delays, noise, dust) and to a reduction of the environmental impact. These approaches can be based on an assessment of the structures safety, which incorporates the inaccuracies in......The paper presents experiences from modern bridge maintenance management, which has been forced to develop new and cost-efficient approaches in order to cope with the increase in overall deterioration of the aging bridge stock, the growing requirements to accessibility and the decreasing budgets...... the condition assessments, the models and the predictions in the strategies and the cost estimations. This may lead to increased inspection frequencies, detailed simulations, monitoring and testing to be used as alternatives to extensive repairs, rehabilitations or strengthening. The approaches will...

  7. A bridge network maintenance framework for Pareto optimization of stakeholders/users costs

    International Nuclear Information System (INIS)

    For managing highway bridges, stakeholders require efficient and practical decision making techniques. In a context of limited bridge management budget, it is crucial to determine the most effective breakdown of financial resources over the different structures of a bridge network. Bridge management systems (BMSs) have been developed for such a purpose. However, they generally rely on an individual approach. The influence of the position of bridges in the transportation network, the consequences of inadequate service for the network users, due to maintenance actions or bridge failure, are not taken into consideration. Therefore, maintenance strategies obtained with current BMSs do not necessarily lead to an optimal level of service (LOS) of the bridge network for the users of the transportation network. Besides, the assessment of the structural performance of highway bridges usually requires the access to the geometrical and mechanical properties of its components. Such information might not be available for all structures in a bridge network for which managers try to schedule and prioritize maintenance strategies. On the contrary, visual inspections are performed regularly and information is generally available for all structures of the bridge network. The objective of this paper is threefold (i) propose an advanced network-level bridge management system considering the position of each bridge in the transportation network, (ii) use information obtained at visual inspections to assess the performance of bridges, and (iii) compare optimal maintenance strategies, obtained with a genetic algorithm, when considering interests of users and bridge owner either separately as conflicting criteria, or simultaneously as a common interest for the whole community. In each case, safety and serviceability aspects are taken into account in the model when determining optimal strategies. The theoretical and numerical developments are applied on a French bridge network.

  8. Managing concrete bridges: Methods for reducing costs and user inconveniences

    DEFF Research Database (Denmark)

    Goltermann, Per

    2005-01-01

    The paper presents experiences from modern bridge maintenance management, which has been forced to develop new and cost-efficient approaches in order to cope with the increase in overall deterioration of the aging bridge stock, the growing requirements to accessibility and the decreasing budgets...

  9. Bridge Management Strategy Based on Extreme User Costs for Bridge Network Condition

    Directory of Open Access Journals (Sweden)

    Ladislaus Lwambuka

    2014-01-01

    Full Text Available This paper presents a practical approach for prioritization of bridge maintenance within a given bridge network. The maintenance prioritization is formulated as a multiobjective optimization problem where the simultaneous satisfaction of several conflicting objectives includes minimization of maintenance costs, maximization of bridge deck condition, and minimization of traffic disruption and associated user costs. The prevalence of user cost during maintenance period is twofold; the first case refers to the period of dry season where normally the traffic flow is diverted to alternative routes usually resurfaced to regain traffic access. The second prevalence refers to the absence of alternative routes which is often the case in the least developed countries; in this case the user cost referred to results from the waiting time while the traffic flow is put on hold awaiting accomplishment of the maintenance activity. This paper deals with the second scenario of traffic closure in the absence of alternative diversion routes which in essence results in extreme user cost. The paper shows that the multiobjective optimization approach remains valid for extreme cases of user costs in the absence of detour roads as often is the scenario in countries with extreme poor road infrastructure.

  10. A SciCode web site: building bridges between owners and users

    International Nuclear Information System (INIS)

    bridging the communication gap between the Owners and Users of SciCode. This model has also been designed to be interactive, allowing it to involve users in many aspects of SciCode quality assurance (SQA), and even in the development of SciCodes. This paper looks at some of the ways AECL is using Web technology with respect to its SciCodes. It briefly describes the background, vision, requirements, capabilities, and future. (author)

  11. SE Requirements Development Tool User Guide

    Energy Technology Data Exchange (ETDEWEB)

    Benson, Faith Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-05-13

    The LANL Systems Engineering Requirements Development Tool (SERDT) is a data collection tool created in InfoPath for use with the Los Alamos National Laboratory’s (LANL) SharePoint sites. Projects can fail if a clear definition of the final product requirements is not performed. For projects to be successful requirements must be defined early in the project and those requirements must be tracked during execution of the project to ensure the goals of the project are met. Therefore, the focus of this tool is requirements definition. The content of this form is based on International Council on Systems Engineering (INCOSE) and Department of Defense (DoD) process standards and allows for single or collaborative input. The “Scoping” section is where project information is entered by the project team prior to requirements development, and includes definitions and examples to assist the user in completing the forms. The data entered will be used to define the requirements and once the form is filled out, a “Requirements List” is automatically generated and a Word document is created and saved to a SharePoint document library. SharePoint also includes the ability to download the requirements data defined in the InfoPath from into an Excel spreadsheet. This User Guide will assist you in navigating through the data entry process.

  12. Bridging the gap connecting users to digital contents

    CERN Document Server

    Lee, Sul H

    2013-01-01

    The amount of digital information that libraries need to manage effectively for the benefit of users is constantly increasing. This book discusses in detail how library administrators can better handle this growing abundance of information, as well as effective ways to allow library users easy access. Respected leaders in the field of librarianship explore various aspects of how librarians are meeting the challenges of delivering more digital information to a changing user base, including preservation demands, licensing agreements, digitizing and making available collections unique to speci

  13. Life-Cycle Cost-Benefit (LCCB) Analysis of Bridges from a User and Social Point of View

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle

    2009-01-01

    During the last two decades, important progress has been made in the life-cycle cost-benefit (LCCB) analysis of structures, especially offshore platforms, bridges and nuclear installations. Due to the large uncertainties related to the deterioration, maintenance, and benefits of such structures...... point of view. In the paper, negative benefits (user costs) are discussed in relation to the maintenance of concrete bridges. A limited number of excerpts from published reports that are related to the importance of estimating user costs when repairs of bridges are planned, and when optimized strategies...... are formulated, are shown. These excerpts clearly show that user costs in several cases completely dominate the total costs. In some cases, the user costs are more than ten times higher than the repair costs. A simple example of how to relate and estimate user costs to the repair of a single bridge is...

  14. User Requirement Study for a Virtual Research Environment

    OpenAIRE

    Sim, Y. W.; Wang, C.; Gilbert, L; Wills, G.B.

    2005-01-01

    This report is a documentation of a user requirement study for Collaborative Orthopaedics Research Environment (CORE) project. The study assesses the needs of users, who are researchers and clinicians working in a bone laboratory, for a Virtual Research Environment (VRE). It was conducted through a consultation process that involved semi-structured interview technique. Requirements of users for a VRE and their corresponding recommendations are outlined according to the study's objectives.

  15. Conflicting Interests in User Requirements for Customization and Personalization

    DEFF Research Database (Denmark)

    Sørensen, Jannick Kirk

    2015-01-01

    The term 'user requirements' appears unproblematic until it is confronted with conflicting interests of who 'the user' is or should be. Customization and personalization can in this context be understood as designers' attempt to avoid or soften the conflict related to the shaping of user...... requirements. In this chapter we argue, based in a case-study of the design-process of a customizable web-interface for a public service broadcaster, that the customization strategy does not solve the problem of the conflicting interests in defining the user....

  16. Understanding your users a practical guide to user requirements methods, tools, and techniques

    CERN Document Server

    Baxter, Kathy

    2005-01-01

    Today many companies are employing a user-centered design (UCD) process, but for most companies, usability begins and ends with the usability test. Although usability testing is a critical part of an effective user-centered life cycle, it is only one component of the UCD process. This book is focused on the requirements gathering stage, which often receives less attention than usability testing, but is equally as important. Understanding user requirements is critical to the development of a successful product. Understanding Your Users is an easy to read, easy to implement, how-to guide on

  17. User Requirements & Demand for Services and Applications in PNs

    DEFF Research Database (Denmark)

    Jiang, Bo

    This paper focuses on the methodology for analyses of user requirements and demand for specific services and applications in relation to personal networks (PNs). The paper has a strong user-centric approach to service and application development based on the widely accepted fact that future servi...

  18. Evaluating the Effects of I-35W Bridge Collapse on Road-Users in the Twin Cities Metropolitan Region

    OpenAIRE

    Feng Xie; David Levinson

    2008-01-01

    This study evaluates the effects of I-35W bridge collapse on road-users in the Minneapolis-St. Paul Metropolitan area. We adopted the seven-County travel demand model developed in previous research, re-calibrated it against July 2007 loop detector traffic data, and used this model to carry out an evaluation of economic loss incurred by increased travel delay in alternative scenarios before and after the bridge collapse. We concluded that the failure of the I-35W bridge resulted in an economic...

  19. A User Requirements Analysis Approach Based on Business Processes

    Institute of Scientific and Technical Information of China (English)

    ZHENG Yue-bin; HAN Wen-xiu

    2001-01-01

    Requirements analysis is the most important phase of information system development.Existing requirements analysis techniques concern little or no about features of different business processes.This paper presents a user requirements analysis approach which focuses business processes on the early stage of requirements analysis. It also gives an example of the using of this approach in the analysis of an enterprise information system.

  20. Graphical user interface prototyping for distributed requirements engineering

    CERN Document Server

    Scheibmayr, Sven

    2014-01-01

    Finding and understanding the right requirements is essential for every software project. This book deals with the challenge to improve requirements engineering in distributed software projects. The use of graphical user interface (GUI) prototypes can help stakeholders in such projects to elicit and specify high quality requirements. The research objective of this study is to develop a method and a software artifact to support the activities in the early requirements engineering phase in order to overcome some of the difficulties and improve the quality of the requirements, which should eventu

  1. User definition and mission requirements for unmanned airborne platforms, revised

    Science.gov (United States)

    Kuhner, M. B.; Mcdowell, J. R.

    1979-01-01

    The airborne measurement requirements of the scientific and applications experiment user community were assessed with respect to the suitability of proposed strawman airborne platforms. These platforms provide a spectrum of measurement capabilities supporting associated mission tradeoffs such as payload weight, operating altitude, range, duration, flight profile control, deployment flexibility, quick response, and recoverability. The results of the survey are used to examine whether the development of platforms is warranted and to determine platform system requirements as well as research and technology needs.

  2. No Code Required Giving Users Tools to Transform the Web

    CERN Document Server

    Cypher, Allen; Lau, Tessa; Nichols, Jeffrey

    2010-01-01

    Revolutionary tools are emerging from research labs that enable all computer users to customize and automate their use of the Web without learning how to program. No Code Required takes cutting edge material from academic and industry leaders - the people creating these tools -- and presents the research, development, application, and impact of a variety of new and emerging systems. *The first book since Web 2.0 that covers the latest research, development, and systems emerging from HCI research labs on end user programming tools *Featuring contributions from the creators of Adobe's Zoet

  3. User needs and requirements analysis for big data healthcare applications.

    Science.gov (United States)

    Zillner, Sonja; Lasierra, Nelia; Faix, Werner; Neururer, Sabrina

    2014-01-01

    The realization of big data applications that allow improving the quality and efficiency of healthcare care delivery is challenging. In order to take advantage of the promising opportunities of big data technologies, a clear understanding of user needs and requirements of the various stakeholders of healthcare, such as patients, clinicians and physicians, healthcare provider, payors, pharmaceutical industry, medical product suppliers and government, is needed. Our study is based on internet, literature and market study research as well as on semi-structured interviews with major stakeholder groups of healthcare delivery settings. The analysis shows that big data technologies could be used to align the opposing user needs of improved quality with improved efficiency of care. However, this requires the integrated view of various heterogeneous data sources, legal frameworks for data sharing and incentives that foster collaboration. PMID:25160268

  4. User requirements for image-guided navigation in spinal surgery

    OpenAIRE

    Craven, Michael P; Pecchia, Leandro; Martin, Jennifer L.

    2013-01-01

    Advances in image-guided technology have resulted in a number of technologies to support surgeons in the identification of tissue and the tracking and navigation of surgical instruments in spinal surgery. There are various existing and proposed systems to support registration and intra-operative image guidance based on fluoroscopy, Computerized Tomography (CT), Magnetic Resonance Imaging (MRI) and ultrasound (US) or combinations of imaging modalities. However, the user requirements for the de...

  5. Geosensors to Support Crop Production: Current Applications and User Requirements

    Directory of Open Access Journals (Sweden)

    Lammert Kooistra

    2011-06-01

    Full Text Available Sensor technology, which benefits from high temporal measuring resolution, real-time data transfer and high spatial resolution of sensor data that shows in-field variations, has the potential to provide added value for crop production. The present paper explores how sensors and sensor networks have been utilised in the crop production process and what their added-value and the main bottlenecks are from the perspective of users. The focus is on sensor based applications and on requirements that users pose for them. Literature and two use cases were reviewed and applications were classified according to the crop production process: sensing of growth conditions, fertilising, irrigation, plant protection, harvesting and fleet control. The potential of sensor technology was widely acknowledged along the crop production chain. Users of the sensors require easy-to-use and reliable applications that are actionable in crop production at reasonable costs. The challenges are to develop sensor technology, data interoperability and management tools as well as data and measurement services in a way that requirements can be met, and potential benefits and added value can be realized in the farms in terms of higher yields, improved quality of yields, decreased input costs and production risks, and less work time and load.

  6. The climate4impact portal: bridging the CMIP5 data infrastructure to impact users

    Science.gov (United States)

    Plieger, Maarten; Som de Cerff, Wim; Page, Christian; Hutjes, Ronald; de Jong, Fokke; Bärring, Lars; Sjökvist, Elin

    2013-04-01

    Together with seven other partners (CERFACS, CNRS-IPSL, SMHI, INHGA, CMCC, WUR, MF-CNRM), KNMI is involved in the FP7 project IS-ENES (http://is.enes.org), which supports the European climate modeling infrastructure, in the work package 'Bridging Climate Research Data and the Needs of the Impact Community'. The aim of this work package is to enhance the use of climate model data and to enhance the interaction with climate effect/impact communities. The portal is based on 17 impact use cases from 5 different European countries, and is evaluated by a user panel consisting of use case owners. As the climate impact community is very broad, the focus is mainly on the scientific impact community. This work has resulted in a prototype portal, the ENES portal interface for climate impact communities, that can be visited at www.climate4impact.eu. The portal is connected to all Earth System Grid Federation (ESGF) nodes containing global climate model data (GCM data) from the fifth phase of the Coupled Model Intercomparison Project (CMIP5) and later from the Coordinated Regional Climate Downscaling Experiment (CORDEX). This global network of all major climate model data centers offers services for data description, discovery and download. The climate4impact portal connects to these services and offers a user interface for searching, visualizing and downloading global climate model data and more. A challenging task was to describe the available model data and how it can be used. The portal tries to inform users about possible caveats when using GCM data. All impact use cases are described in the documentation section, using highlighted keywords pointing to detailed information in the glossary. During the project, the content management system Drupal was used to enable partners to contribute on the documentation section. In this presentation the architecture and following items will be detailed: - Security: Login using OpenID for access to the ESG data nodes. The ESG works in

  7. Improving Requirements Generation Thoroughness in User-Centered Workshops: The Role of Prompting and Shared User Stories

    Science.gov (United States)

    Read, Aaron

    2013-01-01

    The rise of stakeholder centered software development has led to organizations engaging users early in the development process to help define system requirements. To facilitate user involvement in the requirements elicitation process, companies can use Group Support Systems (GSS) to conduct requirements elicitation workshops. The effectiveness of…

  8. Demonstrating the climate4impact portal: bridging the CMIP5 data infrastructure to impact users

    Science.gov (United States)

    Plieger, Maarten; Som de Cerff, Wim; Page, Christian; Hutjes, Ronald; de Jong, Fokke; Bärring, Lars; Sjökvist, Elin

    2013-04-01

    Together with seven other partners (CERFACS, CNRS-IPSL, SMHI, INHGA, CMCC, WUR, MF-CNRM), KNMI is involved in the FP7 project IS-ENES (http://is.enes.org), which supports the European climate modeling infrastructure, in the work package 'Bridging Climate Research Data and the Needs of the Impact Community'. The aim of this work package is to enhance the use of climate model data and to enhance the interaction with climate effect/impact communities. The portal is based on 17 impact use cases from 5 different European countries, and is evaluated by a user panel consisting of use case owners. As the climate impact community is very broad, the focus is mainly on the scientific impact community. This work has resulted in a prototype portal, the ENES portal interface for climate impact communities, that can be visited at www.climate4impact.eu. The portal is connected to all Earth System Grid Federation (ESGF) nodes containing global climate model data (GCM data) from the fifth phase of the Coupled Model Intercomparison Project (CMIP5) and later from the Coordinated Regional Climate Downscaling Experiment (CORDEX). This global network of all major climate model data centers offers services for data description, discovery and download. The climate4impact portal connects to these services and offers a user interface for searching, visualizing and downloading global climate model data and more. During the project, the content management system Drupal was used to enable partners to contribute on the documentation section. The following topics will be demonstrated: - Security: Login using OpenID for access to the ESG data nodes. The ESG works in conjunction with several external websites and systems. The climate4impact portal uses X509 based short lived credentials, generated on behalf of the user with a MyProxy service. Single Sign-on (SSO) is used to make these websites and systems work together. - Discovery: Facetted search based on e.g. variable name, model and institute

  9. The climate4impact portal: bridging CMIP5 data to impact users

    Science.gov (United States)

    Som de Cerff, Wim; Plieger, Maarten; Page, Christian; Hutjes, Ronald; de Jong, Fokke; Barring, Lars; Sjökvist, Elin

    2013-04-01

    Together with seven other partners (CERFACS, CNRS-IPSL, SMHI, INHGA, CMCC, WUR, MF-CNRM), KNMI is involved in the FP7 project IS-ENES (http://is.enes.org), which supports the European climate modeling infrastructure, in the work package 'Bridging Climate Research Data and the Needs of the Impact Community'. The aim of this work package is to enhance the use of climate model data and to enhance the interaction with climate effect/impact communities. The portal is based on 17 impact use cases from 5 different European countries, and is evaluated by a user panel consisting of use case owners. As the climate impact community is very broad, the focus is mainly on the scientific impact community. This work has resulted in a prototype portal, the ENES portal interface for climate impact communities, that can be visited at www.climate4impact.eu. The portal is connected to all Earth System Grid Federation (ESGF) nodes containing global climate model data (GCM data) from the fifth phase of the Coupled Model Intercomparison Project (CMIP5) and later from the Coordinated Regional Climate Downscaling Experiment (CORDEX). This global network of all major climate model data centers offers services for data description, discovery and download. The climate4impact portal connects to these services and offers a user interface for searching, visualizing and downloading global climate model data and more. A challenging task was to describe the available model data and how it can be used. The portal tries to inform users about possible caveats when using model data. All impact use cases are described in the documentation section, using highlighted keywords pointing to detailed information in the glossary. The current portal is a Prototype. It is built to explore state-of-art technologies to provide improved access to climate model data. The prototype will be evaluated and is the basis for development of an operational service. The portal and services provided will be sustained and

  10. Utility/user requirements for the MHTGR desalination plant

    International Nuclear Information System (INIS)

    This paper describes the approach used by Gas-Cooled Reactor Associates (GCRA) and the Metropolitan Water District of Southern California (MWD) in developing Utility/User (U/U) Requirements for the Modular High Temperature Gas-cooled Reactor (MHTGR) Desalination Plant. This is a cogeneration plant that produces fresh water from seawater, and electricity. The U/U requirements for the reference MHTGR plant are used except for those changes necessary to: provide low-grade heat to a seawater desalination process, enable siting in a Southern California coastal area, take advantage of reduced weather extremes where substantial cost reductions are expected, and use seawater cooling instead of a cooling tower. The resulting requirements and the differences from the reference MHTGR requirements are discussed. The nuclear portion of the design is essentially the same as that for the reference MHTGR design. The major differences occur in the turbine-generator and condenser, and for the most part, the design parameters for the reference plant are found to be conservative for the desalination plant. The most important difference in requirements is in the higher seismic levels required for a Southern California site, which requires reassessment and possible modification of the design of some reference plant equipment for use in the desalination plant. (author). 5 refs, 1 tab

  11. User requirements on the future laboratory information systems.

    Science.gov (United States)

    Brender, J; McNair, P

    1996-07-01

    Today numerous information technology solutions exist for the clinical laboratory which operate either as stand-alone functionalities or with ad hoc integration solutions. The OpenLabs (A2028) AIM Project puts emphasis on the design and specification of a framework for the interoperability of existing systems and new advanced services, and consequently concentrates on the issue of integration. The purpose of the OpenLabs open architecture is to serve as a functional solution to this integration. A basic principle for this open architecture is that each of the advanced services shall be able to function individually or in any combination with an existing Laboratory Information System (LIS), and that it shall enable new modular functionalities to be incorporated in a 'plug-and-play' fashion. The synthesis of the main user needs and requirements implies that the future IT solutions: (a) must be highly flexible and maximally customizable--by the users themselves; (b) are based on the concept of open systems, both technically and functionally, which enables modular functionalities from different vendors to co-operate forming a global LIS functionality; (c) are future viable and able to incorporate already installed IT functionalities; (d) support management of failure prevention, of repair, of success, and of change. The establishment of an open architecture implies that a market will develop for modular, scaleable, and cost-effective LIS features without today's dependence on individual manufacturers and hardware/software platforms. PMID:8875016

  12. Introducing requirements engineering into product development : towards systematic user requirements definition

    OpenAIRE

    Kauppinen, Marjo

    2005-01-01

    Without knowing the requirements of customers and users, it is difficult to build the right product. Although requirements engineering (RE) is considered a critical activity in product development, the state of RE practices seems to be immature in many organizations. For several years, researchers have tried to understand why so many companies have informal RE processes and why it is so difficult to introduce RE technology into mainstream practice. This thesis investigates how RE can be i...

  13. Heavy water reactor user requirement document status and path forward

    International Nuclear Information System (INIS)

    This is a Power Point presentation containing: -1. Outline; - 2. Background - Stages and the HWR-URD; - 3. Background - What do we have now?; - 4. Draft 'D0' of the HWR-URD; - 5. The 2001 April Consultancy; - 6. The Path Forward. - 7. Summary. The 2001 April consultancy addressed the following items: - 1. Status of the URD: - The document structure is substantially complete. Appendices or paragraphs need to be added on some topics; - The URD covers the overall requirements for the design of the nuclear island (NI) and interfaces to the BOP for future HWRs. It contains policies, high-level requirements and important requirements for key areas that are of interest to HWR users; - The draft focuses on horizontal-pressure-tube, heavy water moderated and cooled HWRs. When and if other types need to be considered, the TWG will identify these and direct how they are to be addressed; - The level of detail in the draft and its treatment of the international aspects of the topic are appropriate; - 2. Areas needing further consideration: - While intended for future reactors, it is recognized that regulators may wish to use the URD as a benchmark for evaluating existing or replicate reactors; - The international aspects of the URD require detailed review at each stage of its development; - The EUR and EPRI-URD have had targeted reviews by the regulators. This may be appropriate for the HWR-URD but would add 6 to 12 months to the schedule; - These items will be the focus of the AGM planned for 2002 January. The Path Forward section pinpoints the terms: - 2001 August, implying the task, incorporate comments from April Consultancy, producing draft D1; - 2002 January, implying AGM in Vienna, namely, focus on areas needing further consideration: - Ensure requirements are clearly differentiated from desirable features; - Confirm international aspects are appropriately considered; - Establish need for additional step - regulatory review; - 2002, implying revise URD to reflect

  14. 40 CFR 35.929-2 - General requirements for all user charge systems.

    Science.gov (United States)

    2010-07-01

    ... of the user charges or ad valorem taxes which are attributable to waste water treatment services. (g...-Clean Water Act § 35.929-2 General requirements for all user charge systems. User charge systems based... and maintenance of the treatment works, and its approved user charge system. The grantee shall...

  15. A Balanced Approach to Capturing User Requirements in Business- to- Consumer Web Information Systems

    Directory of Open Access Journals (Sweden)

    M. S. Lane

    2001-11-01

    Full Text Available The development of business-to-consumer web information systems pose special challenges in the requirements analysis phase. It is difficult to capture user requirements given that users are relatively autonomous and anonymous and there are no major incentives for users to become involved in the development of a web information system. The researchers reviewed traditional requirement elicitation techniques, marketing research techniques and web usage analysis techniques. Current practice was assessed and the findings suggest that a balanced approach to user requirements capture will result in more complete and user centred requirements. This approach should lead to more effective business-to consumer web information systems.

  16. Course Ontology-Based User's Knowledge Requirement Acquisition from Behaviors within E-Learning Systems

    Science.gov (United States)

    Zeng, Qingtian; Zhao, Zhongying; Liang, Yongquan

    2009-01-01

    User's knowledge requirement acquisition and analysis are very important for a personalized or user-adaptive learning system. Two approaches to capture user's knowledge requirement about course content within an e-learning system are proposed and implemented in this paper. The first approach is based on the historical data accumulated by an…

  17. Environment-behaviour studies: A synergetic bridge between designers and users of open space

    Directory of Open Access Journals (Sweden)

    Barbara Goličnik

    2005-01-01

    Full Text Available This paper critically reflects on a kind and use of knowledge about the users of urban open public spaces in urban planning and design. It shows that designers’ perceptions about usage-spatial relationships are inadequate and many times very different form the actual situations. The findings are based on results from workshops with urban landscape designers and on the basis of observation and behavioural mapping in squares and parks of city centres of two European cities, Edinburgh and Ljubljana. As the behavioural maps graphically express structural relationships between physical qualities of places and their users, they represent a useful tool for improvement of designers’ knowledge and perception about potential and actual use of a place. In this respect they represent a basis for better cooperation and synergy between users and planners or designers, as the knowledge about any possible or expected behavioural patterns in places may lead into effective and responsive design.

  18. Results of the user survey of functional requirements for the Oak Ridge Environmental Information System

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    The Oak Ridge Environmental Information System (OREIS) user survey of functional requirements was conducted in the spring and summer of 1994 to allow representatives of the OREIS user community to review and confirm the functionality of the OREIS system and to provide a method to document user acceptance of the system. The results of the survey confirm that the OREIS system meets data and functional requirements of the users. It further emphasizes that the user community is quite diverse, with many different needs for and perspectives about OREIS, and with varying needs for access and use of software tools. To meet the needs of a diverse and potentially changing user community, OREIS staff will survey the user community periodically to obtain input on changes to user requirements for future versions of the system.

  19. User requirements and future expectations for geosensor networks – an assessment

    NARCIS (Netherlands)

    Kooistra, L.; Thessler, S.; Bregt, A.K.

    2009-01-01

    Considerable progress has been made on the technical development of sensor networks. However increasing attention is now also required for the broad diversity of end-user requirements for the deployment of sensor networks. An expert survey on the user requirements and future expectations for sensor

  20. Assessment of Soil Moisture Data Requirements by the Potential SMAP Data User Community: Review of SMAP Mission User Community

    Science.gov (United States)

    Brown, Molly E.; Escobar, Vanessa M.

    2013-01-01

    NASA's Soil Moisture Active and Passive (SMAP) mission is planned for launch in October 2014 and will provide global measurements of soil moisture and freeze thaw state. The project is driven by both basic research and applied science goals. Understanding how application driven end-users will apply SMAP data, prior to the satellite's launch, is an important goal of NASA's applied science program and SMAP mission success. Because SMAP data are unique, there are no direct proxy data sets that can be used in research and operational studies to determine how the data will interact with existing processes. The objective of this study is to solicit data requirements, accuracy needs, and current understanding of the SMAP mission from the potential user community. This study showed that the data to be provided by the SMAP mission did substantially meet the user community needs. Although there was a broad distribution of requirements stated, the SMAP mission fit within these requirements.

  1. Solar sorptive cooling. Technologies, user requirements, practical experience, future prospects

    Energy Technology Data Exchange (ETDEWEB)

    Treffinger, P. [DLR Deutsches Zentrum fuer Luft- und Raumfahrt e.V., Hardthausen (Germany); Hertlein, H.P. [eds.] [Forschungsverbund Sonnenenergie, Koeln (Germany)

    1998-09-01

    Sorptive cooling techniques permit the use of low-temperature solar heat, i.e. a renewable energy of low cost and world-wide availability. The Forschungsverbund Sonnenenergie intends to develop solar sorptive cooling technologies to the prototype stage and, in cooperation with the solar industry and its end users, to promote practical application in air conditioning of buildings and cold storage of food. The workshop presents an outline of the state of development of solar sorptive cooling from the view of users and developers. Exemplary solar cooling systems are described, and the potential of open and closed sorptive processes is assessed. Future central activities will be defined in an intensive discussion between planners, producers, users and developers. [German] Der Einsatz von Sorptionstechniken zur Kaelteerzeugung erlaubt es, als treibende Solarenergie Niedertemperatur-Solarwaerme einzusetzen, also eine regenerative Energie mit sehr geringen Kosten und weltweiter Verfuegbarkeit. Der Forschungsverbund Sonnenenergie hat sich als Aufgabe gestellt, die Techniken der solaren Sorptionskuehlung bis zum Prototyp zu entwickeln und mit Industrie und Nutzern die praktische Anwendung voranzubringen. Die Anwendungsfelder sind die Klimatisierung von Gebaeuden und die Kaltlagerung von Lebensmitteln. Der Workshop gibt einen Ueberblick zum Entwicklungsstand der solaren Sorptionskuehlung aus der Sicht der Anwender und Entwickler. Bereits ausgefuehrte Beispiele zur solaren Kuehlung werden vorgestellt und das Potential geschlossener und offener Sorptionsverfahren angegeben. In intensiver Diskussion zwischen Planern, Herstellern, Nutzern und Entwicklern sollen kuenftige Arbeitsschwerpunkte herausgearbeitet werden. (orig.)

  2. Migration and transmission of blood-borne infections among injection drug users: understanding the epidemiologic bridge.

    Science.gov (United States)

    Rachlis, Beth; Brouwer, Kimberly C; Mills, Edward J; Hayes, Michael; Kerr, Thomas; Hogg, Robert S

    2007-10-01

    Migration is one of many social factors contributing to the spread of HIV and other blood-borne or sexually transmitted infections (STI). Bringing together large numbers of people from diverse settings, the process of migration moves infected individuals to diverse geographic locations. Injection drug users (IDU) are a relatively mobile group, often moving between cities, smaller communities, and across international borders for reasons of work, security, or access to narcotics. This mobility indicates the potential for IDU who engage in risky behavior outside their home areas to transmit HIV infection to other IDU, their sex partners, and others in the population. The objectives of this review are to examine: (1) the influence of drug trafficking and the spread of drug use on the diffusion of HIV, (2) the influence of migration on drug use and HIV-related risk behaviors among migrants, and (3) the mobility patterns of IDU and its role in the spread of HIV. We also discuss the potential policy implications of addressing prevention and care issues in mobile drug using populations. PMID:17485179

  3. A mobile Virtual Butler to bridge the gap between users and ambient assisted living: a Smart Home case study.

    Science.gov (United States)

    Costa, Nuno; Domingues, Patricio; Fdez-Riverola, Florentino; Pereira, António

    2014-01-01

    Ambient Intelligence promises to transform current spaces into electronic environments that are responsive, assistive and sensitive to human presence. Those electronic environments will be fully populated with dozens, hundreds or even thousands of connected devices that share information and thus become intelligent. That massive wave of electronic devices will also invade everyday objects, turning them into smart entities, keeping their native features and characteristics while seamlessly promoting them to a new class of thinking and reasoning everyday objects. Although there are strong expectations that most of the users' needs can be fulfilled without their intervention, there are still situations where interaction is required. This paper presents work being done in the field of human-computer interaction, focusing on smart home environments, while being a part of a larger project called Aging Inside a Smart Home. This initiative arose as a way to deal with a large scourge of our country, where lots of elderly persons live alone in their homes, often with limited or no physical mobility. The project relies on the mobile agent computing paradigm in order to create a Virtual Butler that provides the interface between the elderly and the smart home infrastructure. The Virtual Butler is receptive to user questions, answering them according to the context and knowledge of the AISH. It is also capable of interacting with the user whenever it senses that something has gone wrong, notifying next of kin and/or medical services, etc. The Virtual Butler is aware of the user location and moves to the computing device which is closest to the user, in order to be always present. Its avatar can also run in handheld devices keeping its main functionality in order to track user when s/he goes out. According to the evaluation carried out, the Virtual Butler is assessed as a very interesting and loved digital friend, filling the gap between the user and the smart home. The

  4. Identification and Preparation of Derivative Information Products Required by Selected Users of Science Information.

    Science.gov (United States)

    Mavor, Anne S.; And Others

    One area of research with computer-based systems for storage and retrieval of science information is the delivery of knowledge required by users rather than citations to documents which contain the needed knowledge. The purpose of this project was to identify the kinds of derivative information products needed by users of science information and…

  5. Systems engineering and the user: Incorporation of user requirements into the SE process

    Science.gov (United States)

    Naugle, John E.

    1993-01-01

    This paper is organized into four parts. In the Gestation Phase, I describe the process of starting a new mission and establishing its rough boundaries. Next I show how the scientific experiments are selected. Then we enter the Preliminary Design Phase, where we incorporate the scientist's instruments into the systems engineering process. Finally, I show how the Preliminary Design Review (PDR) assures NASA management and the scientists that the scientific requirements have been incorporated into the systems engineering process to everyone's satisfaction.

  6. A Mobile Virtual Butler to Bridge the Gap between Users and Ambient Assisted Living: A Smart Home Case Study

    Directory of Open Access Journals (Sweden)

    Nuno Costa

    2014-08-01

    Full Text Available Ambient Intelligence promises to transform current spaces into electronic environments that are responsive, assistive and sensitive to human presence. Those electronic environments will be fully populated with dozens, hundreds or even thousands of connected devices that share information and thus become intelligent. That massive wave of electronic devices will also invade everyday objects, turning them into smart entities, keeping their native features and characteristics while seamlessly promoting them to a new class of thinking and reasoning everyday objects. Although there are strong expectations that most of the users’ needs can be fulfilled without their intervention, there are still situations where interaction is required. This paper presents work being done in the field of human-computer interaction, focusing on smart home environments, while being a part of a larger project called Aging Inside a Smart Home. This initiative arose as a way to deal with a large scourge of our country, where lots of elderly persons live alone in their homes, often with limited or no physical mobility. The project relies on the mobile agent computing paradigm in order to create a Virtual Butler that provides the interface between the elderly and the smart home infrastructure. The Virtual Butler is receptive to user questions, answering them according to the context and knowledge of the AISH. It is also capable of interacting with the user whenever it senses that something has gone wrong, notifying next of kin and/or medical services, etc. The Virtual Butler is aware of the user location and moves to the computing device which is closest to the user, in order to be always present. Its avatar can also run in handheld devices keeping its main functionality in order to track user when s/he goes out. According to the evaluation carried out, the Virtual Butler is assessed as a very interesting and loved digital friend, filling the gap between the user and the

  7. Software Configuration and Management System. User requirements document Scam/ URD/ WORD/ Issue 1/ revision 0

    CERN Document Server

    Bartolomé, R; Hatziangeli, Eugenia; Last, I; Ninin, P; CERN. Geneva. SPS and LEP Division

    1997-01-01

    This document is the output of the User Requirements phase of the project. It contains a classification of the requirements stated by the users and it will serve as a basis for the selection of a software configuration management tool and for the derivation of a software configuration management procedure for SL and ST. This document has been reviewed by the SLAPS administrators and SL/CO management .

  8. Users' Requirements for Environmental Effects From Innovative Nuclear Energy Systems and Their Fuel Cycles

    International Nuclear Information System (INIS)

    The objective of the International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) is to support the safe, sustainable, economic and proliferation resistant use of nuclear technology to meet the needs of the 21. century. The first part of the project focusses on the development of an understanding of the requirements of possible users of innovative concepts for reactors and fuel cycle applications. This paper reports progress made on the identification of user requirements as they relate to the environment and environmental protection. The user requirements being formulated are intended to limit adverse environmental effects from the different facilities involved in the nuclear fuel cycles to be well below maximum acceptable levels. To determine if the user requirements are met, it is necessary to identify those factors that are relevant to assessment of the environmental performance of innovative nuclear systems. To this effect, Environmental Impact Assessment (EIA) and the Material Flow accounting (MFA) methodologies are being appraised for the suitability for application. This paper develops and provides the rationale for the 'users' requirements' as they are currently defined. Existing Environmental Impact Assessment and Materials Flow Accounting methodologies that can be applied to determine whether or not innovative technologies conform to the User Requirements are briefly described. It is concluded that after establishing fundamental principles, it is possible to formulate sets of general and specific users' requirements against which, the potential adverse environmental effects to be expected from innovative nuclear energy systems (INES) can be assessed. The application of these users' requirements should keep the adverse environmental effects from INES's within acceptable limits. (authors)

  9. User requirements for NASA data base management systems. Part 1: Oceanographic discipline

    Science.gov (United States)

    Fujimoto, B.

    1981-01-01

    Generic oceanographic user requirements were collected and analyzed for use in developing a general multipurpose data base management system for future missions of the Office of Space and Terrestrial Applications (OSTA) of NASA. The collection of user requirements involved; studying the state-of-the-art technology in data base management systems; analyzing the results of related studies; formulating a viable and diverse list of scientists to be interviewed; developing a presentation format and materials; and interviewing oceanographic data users. More effective data management systems are needed to handle the increasing influx of data.

  10. Tool Support for Distributed Software Development : The past - present - and future of gaps between user requirements and tool functionalities

    OpenAIRE

    Herrera, Miles; Hillegersberg, van, R.; Harmsen, Frank; Amrit, Chintan; Geisberger, Eva; Keil, Patrick; Kuhrmann, Marco

    2007-01-01

    This paper presents the past, present, and our view on future user requirements and tool functionalities supporting Globally Distributed Software Teams and highlights the changing emphasis in these user requirements.

  11. Digital Avionics Information System (DAIS): Training Requirements Analysis Model Users Guide. Final Report.

    Science.gov (United States)

    Czuchry, Andrew J.; And Others

    This user's guide describes the functions, logical operations and subroutines, input data requirements, and available outputs of the Training Requirements Analysis Model (TRAMOD), a computerized analytical life cycle cost modeling system for use in the early stages of system design. Operable in a stand-alone mode, TRAMOD can be used for the…

  12. User Requirements for PN to Drive the Definition of a Valid Architecture

    DEFF Research Database (Denmark)

    Olesen, H.; Jiang, B.; Butkus, A.; Schultz, N.; Saugstrup, D.; Sørensen, L.; Pedersen, Christian Fischer; Jensen, Janne Jul; Larsen, Lars Bo; Björksten, M.; Markopoulos, A.; Gkanas, I.; Kaldanis, V.; Prasad, R.; Alm, K.; Vila, J. P.; Köstering, N.

    This deliverable presents a comprehensive survey of all the user scenarios, cases and case studies that have been analysed and proposed within the first year of the MAGNET project. Among the 11 cases presented in this report, 5 of them are presented in separate chapters with a catalogue of scenario...... descriptions, use cases, list of devices, relevant MAGNET concepts and user requirements. The remaining cases are described in a less detailed form and serve as the possible candidate cases for further exploration. The main objective of the deliverable is to present – in a standardised form - all the relevant...... information regarding use cases and user requirements from the cases and case studies considered in MAGNET until now, thereby providing a reference handbook for the MAGNET developers where they can look up the linkages between the systems requirements and the specific use cases. Other chapters present a...

  13. Purple Computational Environment With Mappings to ACE Requirements for the General Availability User Environment Capabilities

    Energy Technology Data Exchange (ETDEWEB)

    Barney, B; Shuler, J

    2006-08-21

    Purple is an Advanced Simulation and Computing (ASC) funded massively parallel supercomputer located at Lawrence Livermore National Laboratory (LLNL). The Purple Computational Environment documents the capabilities and the environment provided for the FY06 LLNL Level 1 General Availability Milestone. This document describes specific capabilities, tools, and procedures to support both local and remote users. The model is focused on the needs of the ASC user working in the secure computing environments at Los Alamos National Laboratory, Lawrence Livermore National Laboratory, and Sandia National Laboratories, but also documents needs of the LLNL and Alliance users working in the unclassified environment. Additionally, the Purple Computational Environment maps the provided capabilities to the Trilab ASC Computing Environment (ACE) Version 8.0 requirements. The ACE requirements reflect the high performance computing requirements for the General Availability user environment capabilities of the ASC community. Appendix A lists these requirements and includes a description of ACE requirements met and those requirements that are not met for each section of this document. The Purple Computing Environment, along with the ACE mappings, has been issued and reviewed throughout the Tri-lab community.

  14. User requirements for decision support systems used for nuclear power plant accident prevention and mitigation

    International Nuclear Information System (INIS)

    One limitation of existing information support systems is that the 'end user' (i.e., decision maker) is not properly accounted for in these systems. Therefore, it is needed to consider how the information to be provided by the system is going to be used and to recognize the cognitive decision making process. To discuss how to consider the end user as an integral part of decision support systems (DSS) a Technical Committee Meeting on 'User's Requirements for DSS' was organized by the IAEA in Vienna from 28 November - 1 December 1988. The meeting was attended by 45 participants from 22 countries and international organizations. Sixteen papers have been presented in three technical sessions, which addressed the following areas: Problem identification; design of DSS; user's considerations in DSSs. A separate abstract was prepared for each of these papers. Refs, figs and tabs

  15. Not all bits have equal value: investigating users' network QoS requirements

    Science.gov (United States)

    Bouch, Anna; Sasse, M. A.

    2001-07-01

    The number of Internet users is expected to triple between 1998 and 2002 largely because of new applications (such as videoconferencing) and new services (such as e-commerce). This shift in usage imposes higher Quality of Service (QoS) requirements at different levels of granularity. It also means that the traditional Internet way of managing quality (best-effort) has to be replaced by a more service-oriented approach. The aim of this paper is to investigate end-users' cognitive and perceptive QoS requirements. We present empirical results on user QoS preferences and QoS graduations. Guidelines for translating these results into metrics that can be used to guide resource allocation mechanisms are discussed.

  16. Preliminary investigation of user requirements for solar radiation data. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Hamilton, C.W.; Thomas, R.E.

    1976-10-29

    The intent of this study is to: (1) make a preliminary assessment of the accuracy and precision of insolation data with respect to user requirements, and (2) make a corresponding assessment of the minimum/maximum geographic network coverage. In order to make these preliminary assessments, several specific questions have been addressed. Specifically: (1) how should users of solar radiation be classified and what principal uses of the data are made by each class, (2) what temporal and spatial properties of the data network are required to adequately serve the defined uses and users of solar radiation data, (3) to what degree does the existing network and associated data fulfill the desired data system properties, and (4) what criteria should be applied in identifying and evaluating expanded network/data options. The findings and conclusions of investigation of these questions are presented.

  17. 76 FR 126 - Requirement for Commercial Users To Use Commercial Public Key Information (PKI) Certificate

    Science.gov (United States)

    2011-01-03

    ... commercial entities by the Surface Deployment and Distribution Command, the United States Department of the... Department of the Army Requirement for Commercial Users To Use Commercial Public Key Information (PKI) Certificate AGENCY: Department of the Army, DoD. Surface Deployment and Distribution Command (SDDC)....

  18. User requirements for the Harmonization of Environmental Measurement Information System HEMIS

    International Nuclear Information System (INIS)

    The purpose of this study was to define as much as possible, the functional requirements of the potential main users of the Harmonization of Environmental Measurement Information System, HEMIS. The resulting report is to be used as a basis for a rapid decision on technical approaches to system development, planning of schedule and costs, and to guide the system development and implementation process

  19. How Much Feedback Is Required for TDD Multi-Antenna Broadcast Channels with User Selection?

    Directory of Open Access Journals (Sweden)

    Salim Umer

    2010-01-01

    Full Text Available The enormous gains in a multi-antenna transmitter broadcast channel require the Channel State Information at the Transmitter (CSIT. Although the fundamental question "How much feedback is required for a broadcast channel?" has been treated in the literature to some extent, a more comprehensive treatment is certainly desirable. We study the time-division duplex broadcast channel with initial assumption of channel state information (CSI neither at the base station (BS nor at the users' side. We provide two transmission strategies through which the BS and the users get necessary CSI. We derive novel lower and upper bounds for the sum rate reflecting the rate loss compared to a perfect CSIT system. Corresponding approximate sum rate expressions are also developed for both schemes. These expressions fully capture the benefits of the CSIT feedback, allowing multi-user diversity gain and better inter-user interference cancellation, and the cost of exchange of information required. These expressions can be optimized for any set of system parameters to unveil the trade-off between the cost and the gains associated to feedback. Thus they allow to characterize the optimal amount of feedback which maximizes the sum rate of the broadcast channel, a well-accepted metric of system performance at the physical layer.

  20. Privacy and data security in E-health: requirements from the user's perspective.

    Science.gov (United States)

    Wilkowska, Wiktoria; Ziefle, Martina

    2012-09-01

    In this study two currently relevant aspects of using medical assistive technologies were addressed-security and privacy. In a two-step empirical approach that used focus groups (n = 19) and a survey (n = 104), users' requirements for the use of medical technologies were collected and evaluated. Specifically, we focused on the perceived importance of data security and privacy issues. Outcomes showed that both security and privacy aspects play an important role in the successful adoption of medical assistive technologies in the home environment. In particular, analysis of data with respect to gender, health-status and age (young, middle-aged and old users) revealed that females and healthy adults require, and insist on, the highest security and privacy standards compared with males and the ailing elderly. PMID:23011814

  1. Establishing the user requirements for the research reactor decommissioning database system

    International Nuclear Information System (INIS)

    In generally, so much information and data will be raised during the decommissioning activities. It is need a systematical electric system for the management of that. A database system for the decommissioning information and data management from the KRR-1 and 2 decommissioning project is developing now. All information and data will be put into this database system and retrieval also. For the developing the DB system, the basic concept, user requirements were established the then set up the system for categorizing the information and data. The entities of tables for input the data was raised and categorized and then converted the code. The ERD (Entity Relation Diagram) was also set up to show their relation. In need of the developing the user interface system for retrieval the data, is should be studied the analyzing on the relation between the input and output the data. Through this study, as results, the items of output tables are established and categorized according to the requirement of the user interface system for the decommissioning information and data. These tables will be used for designing the prototype and be set up by several feeds back for establishing the decommissioning database system

  2. Requirements for UML and OWL Integration Tool for User Data Consistency Modeling and Testing

    DEFF Research Database (Denmark)

    Nytun, J. P.; Jensen, Christian Søndergaard; Oleshchuk, V. A.

    2003-01-01

    . In this paper we analyze requirements for a tool that support integration of UML models and ontologies written in languages like the W3C Web Ontology Language (OWL). The tool can be used in the following way: after loading two legacy models into the tool, the tool user connects them by inserting......The amount of data available on the Internet is continuously increasing, consequentially there is a growing need for tools that help to analyse the data. Testing of consistency among data received from different sources is made difficult by the number of different languages and schemas being used...... modeling constructs like classes, associations and Object Constraint Language (OCL) statements. It is the tool users responsibility to connected the legacy models in such a way that consistency is beeing explicitly defined. A special modeling technique it to be used when specifying possible consistencies...

  3. Versions in the lifecycle of academic papers user requirements and guidelins fo digital repositories

    CERN Document Server

    CERN. Geneva

    2005-01-01

    An academic research paper evolves through various stages during its lifecycle, for example from early conference presentation through working paper to final published refereed journal article. Different versions can co-exist in publicly available electronic form. Finding out researchers’ attitudes towards storing, labelling and making accessible these different versions, both of their own and of their peers’ work is at the heart of the VERSIONS Project, funded by the JISC under the Digital Repositories Programme. The project addresses the issues and uncertainties relating to versions of academic papers in digital repositories. By including a user requirements study, the project will clarify the needs of researchers and other stakeholders for deposit, storage and accessibility of different versions in the lifecycle of a digital resource. In addition to looking at user needs, the project will analyse researchers’ current practice in terms of retention of author copies of their own material. This investig...

  4. Defining user requirements for tele-nuclear medicine applications: from technical feasibility to clinical results

    International Nuclear Information System (INIS)

    Purpose: Defining the user requirements for tele-nuclear medicine systems, in particular in developing countries, is an important prerequisite to establishing a service. However, the availability of low cost PC based servers and, now, access to local ISPs, has made the technical provision of such networks relatively simple and low cost, although transfer of data to and form legacy systems still present many difficulties. Method and Materials: The key driving force in developing countries is the imbalance between skills in the relatively few centres of excellence and the increasing number of installations overall. Requirements include both very rapid remote reporting and/or overnight tele-consultation. Original raw NM data must be available not just 'images'. Using current network standards (VPN) data transfer rate requirements are low. Provision of image fusion between NM, CT and MRI is also highly desirable. Results: Experience has been obtained e.g. in Thailand and Morocco, where a network of servers and remote users, with cardiac application of particular importance, has demonstrated benefit, and increasing volumes of usage. Conclusions: However, the requirements need to be clearly defined, and a staff training program is essential, as is a full evaluation. The transfer of skills is important in raising the overall quality of health care

  5. Beware of Geeks Bearing Gifts - Are we Meeting the Requirements of our User Communities?

    Science.gov (United States)

    Klump, J.

    2007-12-01

    The 20th century brought about an "information revolution" that has forever altered the way we work, communicate, and live. The way science has been conducted for the past 200 years has been challenged by new media of communication and for the dissemination of data. We now have the tools at hand, commonly called cyberinfrastructure, that enable new forms of global collaboration. But are we fully realising the potential of cyberinfrastructure? Has it become an integral part of our scientific culture? Tools developed in Earth and Space Science Informatics projects suffer the same effects like informatics developments in other fields. Many of the projects fail to meet user requirements, and they do so for a number of reasons. Besides a certain reluctance on the side of scientists to adopt new tools for conducting their research, many cyberinfrastructure projects suffer from "marketing myopia" (Levitt, 1960) in the way they try to "sell" their applications. According to Levitt, the difference between selling and marketing is that the former fulfils the needs of the seller and the latter the needs of the buyer. Cyberinfrastructure projects must stop trying to sell their achievements to the scientific community, and instead market them by considering the scientists" needs right at the beginning of their endeavours. Admittedly, the requirements of scientific user communities are "moving targets", because scientific workflows are often subject to ad-hoc changes, depending on the outcome of the preceding step. Another important risk factor, faced by many cyberinfrastructure projects, is that the designated user community is not aware of the availability of this new resource. This is where training and outreach are essential, especially to draw in early adopters of new technology and multipliers among researchers. Only cyberinfrastructure tools that truly serve their designated user community will eventually become part of the scientific infrastructure. This presentation

  6. Utility/user requirements for the modular high temperature gas-cooled reactor

    International Nuclear Information System (INIS)

    This paper describes the approach used by Gas-Cooled Reactor Associates (GCRA) in developing Utility/User Requirements for the Modular High Temperature Gas-cooled Reactor (MHTGR). As representatives of the Utility/User industry, it is GCRA's goal that the MHTGR concept be established as an attractive nuclear option offering competitive economics and limited ownership risks. Commercially deployed MHTGR systems should then compete favorably in a mixed-fuel economy with options using fossil, other nuclear and other non-fossil sources. To achieve this goal, the design of the MHTGR plant must address the problems experienced by the U.S. industrial infrastructure during deployment of the first generation of nuclear plants. Indeed, it is GCRA's intent to utilize the characteristics of MHTGR technology for the development of a nuclear alternative that poses regulatory, financial and operational demands on the Owner/Operator that are, in aggregate, comparable to those encountered with non-nuclear options. The dominant risks faced by U.S. Utilities with current nuclear plants derive from their operational complexity and the degree of regulatory involvement in virtually all aspects of utility operations. The MHTGR approach of using ceramic fuel coatings to contain fission products provides the technical basis for simplification of the plant and stabilization of licensing requirements and thus the opportunity for reducing the risks of nuclear plant ownership. The paper describes the rationale for the selection of key requirements for public safety, plant size and performance, operations and maintenance, investment protection, economics and siting in the context of a risk management philosophy. It also describes the ongoing participation of the Utility/User in interpreting requirements, conducting program and design reviews and establishing priorities from the Owner/Operator perspective. (author). 7 refs, 1 fig

  7. Cognitive task load and support on a ship's bridge : Design and evaluation of a prototype user interface

    OpenAIRE

    Grootjen, M.; Neerincx, M.A.; Passenier, P.O.

    2002-01-01

    Recently, four cognitive support concepts were developed, that should help to handle high-y demand situations. These concepts are based on a cognitive task load model and can be realised with a specific method for cognitive task load analysis. The model and method describe task load in terms of three behavioural factors: the percentage time occupied, the level of information processing and the number of task-set switches. This paper shows the design and evaluation of a prototype user interfac...

  8. Bridging the gap between human and machine trust : applying methods of user-centred design and usability to computer security

    OpenAIRE

    Karvonen, Kristiina

    2008-01-01

    This work presents methods for improving the usability of security. The work focuses on trust as part of computer security. Methods of usability and user-centred design present an essential starting point for the research. The work uses the methods these fields provide to investigate differences between machine and human trust, as well as how the technical expressions of trust could be made more usable by applying these methods. The thesis is based on nine publications, which present various ...

  9. Guidance for preparing user requirements documents for small and medium reactors and their application

    International Nuclear Information System (INIS)

    During the past decade, several countries with highly developed nuclear power programs established user required documents (URDs) to guide the development and implementation of advanced light water reactors. These efforts built upon the extensive experience with operating reactors and included new insights from ongoing research and development to enhance the economic performance and safety of future nuclear power plants. Subsequently, a number of developing countries with plans for introducing nuclear energy into their national programs expressed strong interest in establishing analogous requirements. The IAEA has therefore taken the initiative to assist in the elaboration of such requirements. Building upon relevant documents this report recommends a URD structure and content outline to support developing countries in preparing their URDs for various applications of small and medium reactors (e.g. electricity generation and/or desalination). This report was prepared by representatives from both developing and developed Member States

  10. A Wireless Sensor Network for Hospital Security: From User Requirements to Pilot Deployment

    Directory of Open Access Journals (Sweden)

    Kaseva Ville

    2011-01-01

    Full Text Available Increasing amount of Wireless Sensor Network (WSN applications require low network delays. However, current research on WSNs has mainly concentrated on optimizing energy-efficiency omitting low network delays. This paper presents a novel WSN design targeted at applications requiring low data transfer delays and high reliability. We present the whole design flow from user requirements to an actual pilot deployment in a real hospital unit. The WSN includes multihop low-delay data transfer and energy-efficient mobile nodes reaching lifetime of years with small batteries. The nodes communicate using a low-cost low-power 2.4 GHz radio. The network is used in a security application with which personnel can send alarms in threatening situations. Also, a multitude of sensor measurements and actuator control is possible with the WSN. A full-scale pilot deployment is extensively experimented for performance results. Currently, the pilot network is in use at the hospital.

  11. 78 FR 32581 - Tobacco Products, User Fees, Requirements for the Submission of Data Needed To Calculate User...

    Science.gov (United States)

    2013-05-31

    ... of the 2003 tax rates because those tax rates have changed (75 FR 76921, December 10, 2010). USDA has... HUMAN SERVICES Food and Drug Administration 21 CFR Part 1150 RIN 0910-AG81 Tobacco Products, User Fees... of Tobacco Products AGENCY: Food and Drug Administration, HHS. ACTION: Proposed rule. SUMMARY:...

  12. An approach for using personas and scenarios to procure user-requirements within a procuring organization

    OpenAIRE

    Anderljung, Andreas

    2009-01-01

    The aim of this master thesis is to investigate how a procuring organization can use personas and scenarios to gather user-requirements in the procurement of software. To reach this understanding a case study is carried out to answer the questions of research; which is a definition that suits IKEA Components, which tools and how to use them; and what are the obstacles and enablers for working with personas and scenarios in procurement of software. The thesis consists of a theoretical study in...

  13. The implications of user requirements for the functionality and content of a future EGDI

    Science.gov (United States)

    Pedersen, Mikael; Tulstrup, Jørgen

    2014-05-01

    The FP7 co-funded EGDI-Scope project is conducting analyses, which forms the basis for the development of an implementation plan for a future European Geological Data Infrastructure (EGDI) the aim of which will be to serve pan-European geological information from the European geological survey organisations. An important aspect of the project has been to consult stakeholders in order to deduce requirements, which is a fundamental prerequisite for making recommendations on the content and technical design of the system. It is indisputable that EGDI will have to build on international standards such as OGC and CGI and take into account legislative requirements from e.g. the INSPIRE directive. This will support the tasks of data providers and facilitate integration with other e-Infrastructures, but will not in itself lever the end user experiences. In order to make the future EGDI a successful online contributor of geological information, EGDI-Scope has therefore been looking very concretely into the needs and expectations of various user groups Most people have clear expectations anno 2014. They want to be able to search the web for information, and once found, they expect fast-performing, intuitive web applications with buttons to click, maps to navigate and reliable content to fulfil their immediate needs. In order for the EGDI to handle such requirements, a number of use cases for various thematic areas have been assessed. The use cases reveal (for example) that information about the geological composition of the ground is critical for the assessment of things like ecosystems or ground water quality. But where ecosystem assessment relies on the composition of the surface layers, groundwater geochemistry rely on the lithology of subsurface layers. For both scenarios, harmonised, pan-European geological maps are very important, but the harmonisation should not only relate to lithological classes, but also to the depth representation. The use cases also make clear

  14. The potential for bridging: HIV status awareness and risky sexual behaviour of injection drug users who have non-injecting permanent partners in Ukraine

    Directory of Open Access Journals (Sweden)

    Alyona Mazhnaya

    2014-02-01

    Full Text Available Objective: To quantify potential bridging of HIV transmission between the injection drug using subpopulation to the non-injection drug using population through unprotected heterosexual sex. Design: Secondary analysis of cross-sectional data. Methods: A sub-sample of participants who reported having a permanent partner who are not injection drug users and have not injected drugs in the past (N=1379 was selected from a survey implemented in 26 Ukrainian cities in 2011. This study evaluates the association between consistent condom use and awareness of HIV status as measured by rapid testing during the study (known/unknown HIV+, known/unknown HIV− and undetermined among a sub-sample of male injection drug users (IDUs who have a non-injecting permanent partner. Poisson regression, with robust variance estimates, was utilized to identify associations while adjusting for other factors. Results: Reported consistent condom use varied between 15.5% (unknown HIV− and 37.5% (known HIV+; average use was 19.3%. In multivariate analysis, males who were aware of their HIV+ status were more likely to report recent consistent condom use compared to those who were unaware of their HIV+ status. This association remains after adjustment for age, region, education level, years of injection, alcohol use, self-reported primary drug use and being an NGO client (prevalence ratio=1.65; 95% CI 1.03–2.64. No such association was found for those who were HIV−. Conclusions: Our results regarding HIV-positive male IDUs reinforce previous findings that HIV testing and counselling may be an effective means of secondary prevention. Further research is needed to understand how to effectively promote safer sex behaviours for IDUs who are currently HIV−.

  15. User requirements and approaches of development for future nuclear energy system

    International Nuclear Information System (INIS)

    Technology innovation is one of the key issues in every field for the future of the technology. In early 21st century, international nuclear society has a common recognition on the necessity of innovative nuclear energy system to cope with new trend and increasing energy demand, several international programs were initiated for development of new systems that secure stable energy supply and have improved public acceptance, safety, and cost-effectiveness. This paper surveyed status of international activities on future innovative nuclear energy systems, and describes the user requirements of future nuclear energy system for the deployment in the future. The approaches to development of the innovative nuclear energy technologies for meeting future goals were discussed

  16. Defining climate modeling user needs: which data are actually required to support impact analysis and adaptation policy development?

    Science.gov (United States)

    Swart, R. J.; Pagé, C.

    2010-12-01

    Until recently, the policy applications of Earth System Models in general and climate models in particular were focusing mainly on the potential future changes in the global and regional climate and attribution of observed changes to anthropogenic activities. Is climate change real? And if so, why do we have to worry about it? Following the broad acceptance of the reality of the risks by the majority of governments, particularly after the publication of IPCC’s 4th Assessment Report and the increasing number of observations of changes in ecological and socio-economic systems that are consistent with the observed climatic changes, governments, companies and other societal groups have started to evaluate their own vulnerability in more detail and to develop adaptation and mitigation strategies. After an early focus on the most vulnerable developing countries, recently, an increasing number of industrialized countries have embarked on the design of adaptation and mitigation plans, or on studies to evaluate the level of climate resilience of their development plans and projects. Which climate data are actually required to effectively support these activities? This paper reports on the efforts of the IS-ENES project, the infrastructure project of the European Network for Earth System Modeling, to address this question. How do we define user needs and can the existing gap between the climate modeling and impact research communities be bridged in support of the ENES long-term strategy? In contrast from the climate modeling community, which has a relatively long history of collaboration facilitated by a relatively uniform subject matter, commonly agreed definitions of key terminology and some level of harmonization of methods, the climate change impacts research community is very diverse and fragmented, using a wide variety of data sources, methods and tools. An additional complicating factor is that researchers working on adaptation usually closely collaborate with non

  17. m-Learning in the education of multimedia technologists and designers at the university level: A user requirements study

    OpenAIRE

    Garaj, V

    2010-01-01

    This article is available open access through the publisher’s website. Copyright @ 2010 IEEE. An extensive user requirements study was carried out to define the scope of functionality for the applications of m-learning with the potential to enhance the student performance and experience within the BSc Multimedia Technology and Design (MMTD) course at the School of Engineering and Design, Brunel University, United Kingdom. Based on participatory action research and user-centered design, the...

  18. Framework for Bridges Maintenance in Egypt

    Directory of Open Access Journals (Sweden)

    Hesham Abd Elkhalek

    2016-01-01

    Full Text Available The traditional approaches for bridges maintenance is proven to be inefficient as they lead to random way of spending maintenance budget and deteriorating bridge conditions. In many cases, maintenance activities are performed due to user complaints. The objective of this paper is to develop a practical and reliable framework to manage the maintenance and repair activities of Bridges network in Egypt considering performance and budget limits. The model solves an optimization problem that maximizes the average condition of the network given the limited budget using Genetic Algorithm (GA. The main tasks of the system are bridge inventory, condition assessment, deterioration using markov model, and maintenance optimization. The developed model takes into account multiple parameters including serviceability requirements, budget allocation, element importance on structural safety and serviceability, bridge impact on network, and traffic. A questionnaire is conducted to complete the research scope. The proposed model is implemented in software, which provides a friendly user interface. The results of the framework are multi – year maintenance plan for the entire network for up to five years. A case study is presented for validating and testing the model with Data collected from “General Authority for Roads, Bridges and Land Transport” in Egypt.

  19. The Effects of Determining User Requirements in Physical Theraphy and Rehabilitation Departments on the User’s Efficiency

    Directory of Open Access Journals (Sweden)

    F. Demet Çetin

    2004-01-01

    Full Text Available The buildings are usually meet many changes before the end of their physical life. If these changes are not met by the buildings, the functional obsolescence is inevitable. The user requirements must be determined correctly during the design process for delaying the functional obsolescence as possible. Belong to this aim, the effects of user requirements on functional changes were tried to determine in the study which was held in physical therapy and rehabilitation departments. After examining the data, the results which are given below was founded;If the space and equipments are not in right dimensions and positions, the users can not use the spaces comfortably. The spaces that users have great problems in the usage of these areas are toilets and baths. The location of stairs and elevators in these units are another important data during design process. If these elements are located in the centre or in the sides of the building, the usage might be provided easily. As a result, it was determined that the most important factors primarily in the content of user requirements are the location of toilets, baths, stairs and elevators.In the physical therapy and rehabilitation departments that the user requirements can not be eliminated, is tried to produce different solutions. In physical therapy and rehabilitation departments, the units which are inadequate, are moved different sections and the usage of these units can not be functional.Belong to these data, the properties of physical spaces are determined by evaluating the questionnaire. The user requirements, location of toilets, baths, stairs and elevators were examined in different physical therapy and rehabilitation departments and determined their effects on design.

  20. Model Based User's Access Requirement Analysis of E-Governance Systems

    Science.gov (United States)

    Saha, Shilpi; Jeon, Seung-Hwan; Robles, Rosslin John; Kim, Tai-Hoon; Bandyopadhyay, Samir Kumar

    The strategic and contemporary importance of e-governance has been recognized across the world. In India too, various ministries of Govt. of India and State Governments have taken e-governance initiatives to provide e-services to citizens and the business they serve. To achieve the mission objectives, and make such e-governance initiatives successful it would be necessary to improve the trust and confidence of the stakeholders. It is assumed that the delivery of government services will share the same public network information that is being used in the community at large. In particular, the Internet will be the principal means by which public access to government and government services will be achieved. To provide the security measures main aim is to identify user's access requirement for the stakeholders and then according to the models of Nath's approach. Based on this analysis, the Govt. can also make standards of security based on the e-governance models. Thus there will be less human errors and bias. This analysis leads to the security architecture of the specific G2C application.

  1. Requirements of a system to reduce car-to-vulnerable road user crashes in urban intersections.

    Science.gov (United States)

    Habibovic, Azra; Davidsson, Johan

    2011-07-01

    Intersection crashes between cars and vulnerable road users (VRUs), such as pedestrians and bicyclists, often result in injuries and fatalities. Advanced driver assistance systems (ADASs) can prevent, or mitigate, these crashes. To derive functional requirements for such systems, an understanding of the underlying contributing factors and the context in which the crashes occur is essential. The aim of this study is to use microscopic and macroscopic crash data to explore the potential of information and warning providing ADASs, and then to derive functional sensor, collision detection, and human-machine interface (HMI) requirements. The microscopic data were obtained from the European project SafetyNet. Causation charts describing contributing factors for 60 car-to-VRU crashes had been compiled and were then also aggregated using the SafetyNet Accident Causation System (SNACS). The macroscopic data were obtained from the Swedish national crash database, STRADA. A total of 9702 crashes were analyzed. The results show that the most frequent contributing factor to the crashes was the drivers' failure to observe VRUs due to reduced visibility, reduced awareness, and/or insufficient comprehension. An ADAS should therefore help drivers to observe the VRUs in time and to enhance their ability to interpret the development of events in the near future. The system should include a combination of imminent and cautionary collision warnings, with additional support in the form of information about intersection geometry and traffic regulations. The warnings should be deployed via an in-vehicle HMI and according to the likelihood of crash risk. The system should be able to operate under a variety of weather and light conditions. It should have the capacity to support drivers when their view is obstructed by physical objects. To address problems that vehicle-based sensors may face in this regard, the use of cooperative systems is recommended. PMID:21545892

  2. The USEtox story: A survey of model developer visions and user requirements

    DEFF Research Database (Denmark)

    Westh, Torbjørn Bochsen; Hauschild, Michael Zwicky; Birkved, Morten; Jørgensen, Michael Søgaard; Rosenbaum, Ralph K.; Fantke, Peter

    2015-01-01

    into LCA software and methods, (4) improve update/testing procedures, (5) strengthen communication between developers and users, and (6) extend model scope. By generalizing our recommendations to guide scientific model development in a broader context, we emphasize to acknowledge different levels of...... user expertise to integrate sound revision and update procedures and to facilitate modularity, data import/export, and incorporation into relevant software and databases during model design and development. Our fully documented approach can inspire performing similar surveys on other LCA-related tools...... interview results uncover various user requests regarding USEtox usability. Results were systematically analyzed to translate user requests into recommendations to improve USEtox from a user perspective and were afterwards applied in the further USEtox development process. Conclusions We demonstrate that...

  3. A Case-Based Personal Travel Assistant for Elaborating User Requirements and Assessing Offers

    OpenAIRE

    Coyle, Lorcan; Cunningham, Padraig; Hayes, Conor

    2002-01-01

    This paper describes a case-based approach to user profiling in a Personal Travel assistant (based on the 1998 FIPA Travel Scenario). The ap-proach is novel in that the user profile is made up of a set of cases capturing previous interactions rather than as a single composite case. This has the advan-tage that the profile is always up-to-date and also allows for the borrowing of cases from similar users when coverage is poor. Profile data is retrieved from a database in an XML format and load...

  4. Bridge? What's a Bridge?

    Science.gov (United States)

    Gutsche, George

    1996-01-01

    Considers the metaphor of the "bridge" as it applies to Russian-language courses at the university level. The article examines broader curricular issues of technology, innovation, and outside pressures on language teaching. (22 references) (CK)

  5. Bridging the Gap between User Experience Research and Design in Industry: An Analysis of Two Common Communication Tools--Personas and Scenarios

    Science.gov (United States)

    Putnam, Cynthia

    2010-01-01

    User experience (UX) research in the design of technology products utilizes human-centered design (HCD) methods to summarize and explain pertinent information about end users to designers. However, UX researchers cannot effectively communicate the needs and goals of users if designers do not find UX research (a) easy to integrate into design…

  6. Railroad Bridges

    Data.gov (United States)

    Department of Homeland Security — Bridges-Rail in the United States According to The National Bridge Inspection Standards published in the Code of Federal Regulations (23 CFR 650.3), a bridge isA...

  7. TorBricks: Blocking-Resistant Tor Bridge Distribution

    OpenAIRE

    Zamani, Mahdi; Saia, Jared; Crandall, Jedidiah

    2016-01-01

    Tor is currently the most popular network for anonymous Internet access. It critically relies on volunteer nodes called bridges for relaying Internet traffic when a user's ISP blocks connections to Tor. Unfortunately, current methods for distributing bridges are vulnerable to malicious users who obtain and block bridge addresses. In this paper, we propose TorBricks, a protocol for distributing Tor bridges to n users, even when an unknown number t < n of these users are controlled by a malicio...

  8. Development of a Web-based information system for Bangkok, Thailand. Report on the development of user requirements

    OpenAIRE

    Bakken, T.H.; Bjørkenes, A.

    2003-01-01

    This report describes the user requirements of the Internet module to be developed as part of the 'Metropole Watch - Environmental Monitoring and Management System for the Chao Praya River in the Metropole of Bangkok'. There are 4 main types of data that shall be presented on the Internet/Web: 1. Map-data (river, khlongs, administrative units, location of sampling points, pollution sources, etc) handled by a geographical information system (GIS). 2. Classified/aggregated water quality data in...

  9. The requirements of Parallel Data Warehousing Environment to Improve the Performance with dominating sets for Next generation Users

    OpenAIRE

    Umapavankumar Kethavarapu; S.Saraswathi

    2012-01-01

    The data warehousing (DWH) environment is useful to handle bulk data processing by providing techno-functional aspects, the parallelism and distribution in DWH will greatly serve the customers and management. In this paper we described the master data management (MDM), data virtualization, and integration of middle ware technologies to the parallel data warehouse (PDW).It is very much useful because the users are requiring their data in less time and they want to interact with the system in l...

  10. The Internet Inter-Orb Protocol Security Bridge

    Directory of Open Access Journals (Sweden)

    Pawel Slowikowski

    1999-01-01

    Full Text Available In this paper, we present a security bridge for the Internet protocol of interoperability amongst CORBA objects and the Internet inter-ORB Protocol (IIOP. The bridge helps in making accessible objects in the Internet and makes possible the access control to them. The bridge was realized in the popular request broker the Visigenic's VisiBroker under Windows 95/NT and Solaris 2.X operating systems. We describe two ways of locating the bridge in the request broker. The first means uses one name domain of broker and is not transparent for client. The second one uses two name domains and provides objects protection on the level of the Naming Service and is transparent lor the client. We also describe the variant ofthe second means with using GateKeeper server to support IIOP tunneling within HTTP. We emphasize the importance of a firewall, cooperating with a bridge. which is required for the purpose of providing object protection. The paper presents an original conception of security managing, basing on the ideas of users, groups and resources defined using the standard terms of CORBA, IIOP and TCP/IP, that allows to control positively and negatively the access to classes (interfaces, objects and also to their individual methods. This conception was effectively implemented in a functioning bridge. Further chapters describe the foundations and some details of the bridge implementation sueli as the use ofthe Interface Repository, cache memory application, thread synchronization and the way of synchronization of the configuration applet with the bridge's objects. We discuss the influence of these solutions on the efficiency ofthe bridge and its source code portability. We also present the general structure of the component objects ofthe bridge with a scheme. ln the next part we characterize the implementation foundations ofthe bridge manager, realized as an applet in Java, with the stress on the possibility of the bridge configuration through the

  11. Concrete bridge prioritization system

    OpenAIRE

    Kesselring, Debbie Anne

    1995-01-01

    An alternative method of prioritization for concrete bridge maintenance, repair, and rehabilitation activities is required due to the inability of the current system to manage the increasing nmnber of aging concrete bridges. The Concrete Bridge Prioritization System was proposed because of its ability to address the critical technical parameters of safety and cost benefit in prioritization of funding and work allocation. The analysis includes four parts, service life assessment, s...

  12. User Requirements for Internet Of Things (IoT) Applications : An Observational study

    OpenAIRE

    Namirimu, Victoria

    2015-01-01

    Context. Internet of Things (IoT) is a new trending phase of technology. IoT refers to communication and connectivity between things such as technological devices, actuators, sensors, and people or processes with unique identifiers. The importance of IoT is to improve the daily living standards of an average user. IoT is made for the people and used by the people for many reasons such as improved health, business innovations, and personal health trackers. Examples of IoT applications and serv...

  13. Exploring user and system requirements of linked data visualization through a visual dashboard approach

    OpenAIRE

    Mazumdar, Suvodeep; Petrelli, Daniela; Ciravegna, Fabio

    2014-01-01

    One of the open problems in SemanticWeb research is which tools should be provided to users to explore linked data. This is even more urgent now that massive amount of linked data is being released by governments worldwide. The development of single dedicated visualization applications is increasing, but the problem of exploring unknown linked data to gain a good understanding of what is contained is still open. An effective generic solution must take into account the user’s point of view, th...

  14. Drought Predictability and Prediction in a Changing Climate: Assessing Current Predictive Knowledge and Capabilities, User Requirements and Research Priorities

    Science.gov (United States)

    Schubert, Siegfried

    2011-01-01

    Drought is fundamentally the result of an extended period of reduced precipitation lasting anywhere from a few weeks to decades and even longer. As such, addressing drought predictability and prediction in a changing climate requires foremost that we make progress on the ability to predict precipitation anomalies on subseasonal and longer time scales. From the perspective of the users of drought forecasts and information, drought is however most directly viewed through its impacts (e.g., on soil moisture, streamflow, crop yields). As such, the question of the predictability of drought must extend to those quantities as well. In order to make progress on these issues, the WCRP drought information group (DIG), with the support of WCRP, the Catalan Institute of Climate Sciences, the La Caixa Foundation, the National Aeronautics and Space Administration, the National Oceanic and Atmospheric Administration, and the National Science Foundation, has organized a workshop to focus on: 1. User requirements for drought prediction information on sub-seasonal to centennial time scales 2. Current understanding of the mechanisms and predictability of drought on sub-seasonal to centennial time scales 3. Current drought prediction/projection capabilities on sub-seasonal to centennial time scales 4. Advancing regional drought prediction capabilities for variables and scales most relevant to user needs on sub-seasonal to centennial time scales. This introductory talk provides an overview of these goals, and outlines the occurrence and mechanisms of drought world-wide.

  15. Testing Web Services Based on User Requirements%用户需求驱动的Web服务测试

    Institute of Scientific and Technical Information of China (English)

    许蕾; 陈林; 徐宝文

    2011-01-01

    Web service testing can be carried out by developers, providers, integrators, thirdparty certifiers and users, and different testers have different testing objects, testing resources and testing techniques. In realities, testing Web services in the view of users is more practical than others, and can improve testing efficiency in the case study. The authors set up user requirement model firstly, which began with general and abstract object requirements, and then decomposed and refined into concrete and determined atomic Web services, together with such key elements as layer relationships, control structures and restrict conditions, presented as a tree-style model; Next, test case generation and selection is carried out for the object level, service combination level and atomic service level of the user requirement model, and the corresponding techniques are based on equivalence division, data flow analysis and mutation testing; Then, the regression testing would have better efficiency. Based on the dependence relationships in the user requirement model and the fluctuation analysis method, the related paths and variables of Services under testing could be determined quickly; Finally, the workflow and case study are shown with the travel scheduling example.%Web服务涉及开发者、提供者、注册中心、用户等多方,各方测试目的、所掌握的资源以及所使用的测试方法各异.以用户需求来驱动Web服务测试,更切合现状且能提升测试效率.文中建立了用户需求特征模型,引入层次关系、控制结构、约束条件等要素;对照目标级、服务组合、原子服务需求,分别进行基于等价类划分、数据流分析和变异测试的测试用例生成选择;当需求变动时,通过波动分析能迅速定位到服务的相关路径和变量,保证回归测试的效率;最后通过行程安排实例展示了工作流程和实验结果.

  16. Spacelab user implementation assessment study. (Software requirements analysis). Volume 2: Technical report

    Science.gov (United States)

    1976-01-01

    The engineering analyses and evaluation studies conducted for the Software Requirements Analysis are discussed. Included are the development of the study data base, synthesis of implementation approaches for software required by both mandatory onboard computer services and command/control functions, and identification and implementation of software for ground processing activities.

  17. Interplay between requirements, software architecture, and hardware constraints in the development of a home control user interface

    DEFF Research Database (Denmark)

    Loft, M.S.; Nielsen, S.S.; Nørskov, Kim;

    2012-01-01

    We have developed a new graphical user interface for a home control device for a large industrial customer. In this industrial case study, we first present our approaches to requirements engineering and to software architecture; we also describe the given hardware platform. Then we make two...... contributions. Our first contribution is to provide a specific example of a real-world project in which a Twin Peaks-compliant approach to software development has been used, and to describe and discuss three examples of interplay between requirements and software architecture decisions. Our second contribution...... is to propose the hardware platform as a third Twin Peaks element that must be given attention in projects such as the one described in this paper. Specifically, we discuss how the presence of severe hardware constraints exacerbates making trade-offs between requirements and architecture....

  18. Mission from Mars - a method for exploring user requirements for children in a narrative space

    DEFF Research Database (Denmark)

    Dindler, Christian; Ludvigsen, Martin; Lykke-Olesen, Andreas;

    2005-01-01

    In this paper a particular design method is propagated as a supplement to existing descriptive approaches to current practice studies especially suitable for gathering requirements for the design of children's technology. The Mission from Mars method was applied during the design of an electronic...

  19. Mobile-supported life charting for bipolar patients - user requirements study.

    Science.gov (United States)

    Andersen, Per-Øivin Berg; Babic, Ankica

    2013-01-01

    It is assumed that bipolar disorder patients can benefit from monitoring their mood, sleep, medicine intake and behavior which could be both done by patients themselves and in cooperation with health care professionals. This study aims at understanding what is required from a computerized system, as seen from the view of therapists and the patients, and how the newer mobile technologies (smart phones and tablets) can be utilized to support development of such a system. The study focuses on several existing solutions available either freely or on the market. Then these solutions are evaluated by both patients and medical professionals as a part of the system requirements study to be used in a new system development that will utilize mobile technologies to support the performance and patient outcomes. PMID:23920885

  20. A conceptual design for an integrated data base management system for remote sensing data. [user requirements and data processing

    Science.gov (United States)

    Maresca, P. A.; Lefler, R. M.

    1978-01-01

    The requirements of potential users were considered in the design of an integrated data base management system, developed to be independent of any specific computer or operating system, and to be used to support investigations in weather and climate. Ultimately, the system would expand to include data from the agriculture, hydrology, and related Earth resources disciplines. An overview of the system and its capabilities is presented. Aspects discussed cover the proposed interactive command language; the application program command language; storage and tabular data maintained by the regional data base management system; the handling of data files and the use of system standard formats; various control structures required to support the internal architecture of the system; and the actual system architecture with the various modules needed to implement the system. The concepts on which the relational data model is based; data integrity, consistency, and quality; and provisions for supporting concurrent access to data within the system are covered in the appendices.

  1. Development and implementation of IT require focus on user participation, acceptance and workflow

    DEFF Research Database (Denmark)

    Sølling, Ina Koldkjær; Carøe, Per; Mathiesen, Kirsten Siggaard

    2014-01-01

    technical problems. An adoption barrier was that the municipality did not determine the efforts and the goal of the project, who could benefit from participating and the requirements of the professionals and the organization including ethical considerations.It was difficult to find citizens who were willing...... to participate. Citizens, who were included in the study accepted and adopted the technology however, "Online Welfare" could not replace the care they used to receive. Therefore, the offer was perceived as an "appendix" which tended to meaninglessness by some of the citizens.The nurses' perception of......Abstract. The study ”Online Care” follows a municipal project ”Online Welfare” where a nurse’s presence in the citizen's own home was replaced by online communication. The paper is based on a citizen’s perspective and seeks to develop meaningful workflow for the benefit of citizens with medical...

  2. Proficiency testing for bacterial whole genome sequencing: an end-user survey of current capabilities, requirements and priorities

    DEFF Research Database (Denmark)

    Moran-Gilad, Jacob; Sintchenko, Vitali; Karlsmose Pedersen, Susanne;

    2015-01-01

    costs. The priority pathogens reported by respondents reflected the key drivers for NGS use (high burden disease and 'high profile' pathogens). The performance of and participation in PT was perceived as important by most respondents. The wide range of sequencing and bioinformatics practices reported by...... end-users highlights the importance of standardisation and harmonisation of NGS in public health and underpins the use of PT as a means to assuring quality. The findings of this survey will guide the design of the GMI PT program in relation to the spectrum of pathogens included, testing frequency and...... volume as well as technical requirements. The PT program for external quality assurance will evolve and inform the introduction of NGS into clinical and public health microbiology practice in the post-genomic era....

  3. Proficiency Testing for Bacterial Whole Genome Sequencing: An End-User Survey of Current Capabilities, Requirements and Priorities

    DEFF Research Database (Denmark)

    Moran-Gilad, Jacob; Sintchenko, Vitali; Karlsmose Pedersen, Susanne;

    2015-01-01

    range of costs. The priority pathogens reported by respondents reflected the key drivers for NGS use (high burden disease and ‘high profile’ pathogens). The performance of and participation in PT was perceived as important by most respondents. The wide range of sequencing and bioinformatics practices...... reported by end-users highlights the importance of standardisation and harmonisation of NGS in public health and underpins the use of PT as a means to assuring quality. The findings of this survey will guide the design of the GMI PT program in relation to the spectrum of pathogens included, testing...... frequency and volume as well as technical requirements. The PT program for external quality assurance will evolve and inform the introduction of NGS into clinical and public health microbiology practice in the post-genomic era....

  4. Myocardial Bridging.

    Science.gov (United States)

    Yuan, Shi-Min

    2016-02-01

    Myocardial bridging is rare. Myocardial bridges are most commonly localized in the middle segment of the left anterior descending coronary artery. The anatomic features of the bridges vary significantly. Alterations of the endothelial morphology and the vasoactive agents impact on the progression of atherosclerosis of myocardial bridging. Patients may present with chest pain, myocardial infarction, arrhythmia and even sudden death. Patients who respond poorly to the medical treatment with β-blockers warrant a surgical intervention. Myotomy is a preferred surgical procedure for the symptomatic patients. Coronary stent deployment has been in limited use due to the unsatisfactory long-term results. PMID:27074276

  5. Myocardial Bridging

    Directory of Open Access Journals (Sweden)

    Shi-Min Yuan

    2016-02-01

    Full Text Available Abstract Myocardial bridging is rare. Myocardial bridges are most commonly localized in the middle segment of the left anterior descending coronary artery. The anatomic features of the bridges vary significantly. Alterations of the endothelial morphology and the vasoactive agents impact on the progression of atherosclerosis of myocardial bridging. Patients may present with chest pain, myocardial infarction, arrhythmia and even sudden death. Patients who respond poorly to the medical treatment with β-blockers warrant a surgical intervention. Myotomy is a preferred surgical procedure for the symptomatic patients. Coronary stent deployment has been in limited use due to the unsatisfactory long-term results.

  6. Redundancy Evaluation of Fracture Critical Bridges

    OpenAIRE

    Bapat, Amey Vivek

    2014-01-01

    Cases of brittle fractures in major bridges prompted AASHTO to publish its first fracture control plan in 1978. It focused on material and fabrication standards, and required periodic 24-month hands-on inspection of bridges with fracture critical members. The practical result of this plan was to significantly increase the life cycle cost of these bridges, rendering them uneconomical. Apart from the Point Pleasant Bridge that failed in 1967, no other bridge has collapsed in the USA following a...

  7. Earth Science Informatics Community Requirements for Improving Sustainable Science Software Practices: User Perspectives and Implications for Organizational Action

    Science.gov (United States)

    Downs, R. R.; Lenhardt, W. C.; Robinson, E.

    2014-12-01

    Science software is integral to the scientific process and must be developed and managed in a sustainable manner to ensure future access to scientific data and related resources. Organizations that are part of the scientific enterprise, as well as members of the scientific community who work within these entities, can contribute to the sustainability of science software and to practices that improve scientific community capabilities for science software sustainability. As science becomes increasingly digital and therefore, dependent on software, improving community practices for sustainable science software will contribute to the sustainability of science. Members of the Earth science informatics community, including scientific data producers and distributers, end-user scientists, system and application developers, and data center managers, use science software regularly and face the challenges and the opportunities that science software presents for the sustainability of science. To gain insight on practices needed for the sustainability of science software from the science software experiences of the Earth science informatics community, an interdisciplinary group of 300 community members were asked to engage in simultaneous roundtable discussions and report on their answers to questions about the requirements for improving scientific software sustainability. This paper will present an analysis of the issues reported and the conclusions offered by the participants. These results provide perspectives for science software sustainability practices and have implications for actions that organizations and their leadership can initiate to improve the sustainability of science software.

  8. Bridge Management Systems

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle

    In this paper bridge management systems are discussed with special emphasis on management systems for reinforced concrete bridges. Management systems for prestressed concrete bridges, steel bridges, or composite bridges can be developed in a similar way....

  9. 33 CFR 118.140 - Painting bridge piers.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Painting bridge piers. 118.140 Section 118.140 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES BRIDGE LIGHTING AND OTHER SIGNALS § 118.140 Painting bridge piers. The District Commander may require painting the sides of bridge channel piers...

  10. Cielo Computational Environment Usage Model With Mappings to ACE Requirements for the General Availability User Environment Capabilities Release Version 1.1

    Energy Technology Data Exchange (ETDEWEB)

    Vigil,Benny Manuel [Los Alamos National Laboratory; Ballance, Robert [SNL; Haskell, Karen [SNL

    2012-08-09

    Cielo is a massively parallel supercomputer funded by the DOE/NNSA Advanced Simulation and Computing (ASC) program, and operated by the Alliance for Computing at Extreme Scale (ACES), a partnership between Los Alamos National Laboratory (LANL) and Sandia National Laboratories (SNL). The primary Cielo compute platform is physically located at Los Alamos National Laboratory. This Cielo Computational Environment Usage Model documents the capabilities and the environment to be provided for the Q1 FY12 Level 2 Cielo Capability Computing (CCC) Platform Production Readiness Milestone. This document describes specific capabilities, tools, and procedures to support both local and remote users. The model is focused on the needs of the ASC user working in the secure computing environments at Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratory, or Sandia National Laboratories, but also addresses the needs of users working in the unclassified environment. The Cielo Computational Environment Usage Model maps the provided capabilities to the tri-Lab ASC Computing Environment (ACE) Version 8.0 requirements. The ACE requirements reflect the high performance computing requirements for the Production Readiness Milestone user environment capabilities of the ASC community. A description of ACE requirements met, and those requirements that are not met, are included in each section of this document. The Cielo Computing Environment, along with the ACE mappings, has been issued and reviewed throughout the tri-Lab community.

  11. Programmevaluierung Bridge

    OpenAIRE

    Warta, Katharina; Good, Barbara; Geyer, Anton

    2009-01-01

    BRIDGE is an initiative funded by the Ministry for Transport, Innovation and Technology (BMVIT) that aims to close the “funding gap” between basic and applied research in stand-alone projects with the primary objective of jointly developing the potential of basic and applied research. BRIDGE acts as an  umbrella structure under which the Austrian Science Fund (FWF) and the  Austrian Research Promotion Agency (FFG) coordinate two thematically open funding programmes: The ...

  12. Modified Geometry of Transition Slabs for Integral Bridges

    OpenAIRE

    Dreier, Damien

    2010-01-01

    Over the past decades, an increasing number of integral bridges have been built. This type of bridge offers various advantages in comparison with standard bridges equipped with expansion joints and bearings. In particular, integral bridges require less maintenance since they require less mechanical elements. Transition slabs, which are used in integral bridges, are directly connected to the bridge deck and therefore they are subjected to large displacements caused by creep, shrinkage and temp...

  13. A New Method to Retrieve the Data Requirements of the Remote Sensing Community – Exemplarily Demonstrated for Hyperspectral User NEEDS

    Directory of Open Access Journals (Sweden)

    Ils Reusen

    2007-08-01

    Full Text Available User-driven requirements for remote sensing data are difficult to define,especially details on geometric, spectral and radiometric parameters. Even more difficult isa decent assessment of the required degrees of processing and corresponding data quality. Itis therefore a real challenge to appropriately assess data costs and services to be provided.In 2006, the HYRESSA project was initiated within the framework 6 programme of theEuropean Commission to analyze the user needs of the hyperspectral remote sensingcommunity. Special focus was given to finding an answer to the key question, “What arethe individual user requirements for hyperspectral imagery and its related data products?”.A Value-Benefit Analysis (VBA was performed to retrieve user needs and address openitems accordingly. The VBA is an established tool for systematic problem solving bysupporting the possibility of comparing competing projects or solutions. It enablesevaluation on the basis of a multidimensional objective model and can be augmented withexpert’s preferences. After undergoing a VBA, the scaling method (e.g., Law ofComparative Judgment was applied for achieving the desired ranking judgments. Theresult, which is the relative value of projects with respect to a well-defined main objective,can therefore be produced analytically using a VBA. A multidimensional objective modeladhering to VBA methodology was established. Thereafter, end users and experts wererequested to fill out a Questionnaire of User Needs (QUN at the highest level of detail -the value indicator level. The end user was additionally requested to report personalpreferences for his particular research field. In the end, results from the experts’ evaluationand results from a sensor data survey can be compared in order to understand user needsand the drawbacks of existing data products. The investigation – focusing on the needs of the hyperspectral user

  14. Thinking Out Loud and e-Health for Coordinated Care Lessons from User Requirements Gathering in the 4C Project

    OpenAIRE

    Ellis, Leonie; Cheek, Colleen; Turner, Paul

    2016-01-01

    e-Health is a core part of Australias strategy to address rising costs and changing demands for healthcare services. With over $1bn spent and only 6% of Australians registered, the personally controlled electronic health record (PCEHR) suggests user challenges remain. While evidence confirms the benefits from involving users in systems development there is a need for more examples of how to engage effectively in healthcare settings. This research describes the use of an agile development meth...

  15. National Bridge Inventory (NBI) Bridges

    Data.gov (United States)

    Department of Homeland Security — The NBI is a collection of information (database) describing the more than 600,000 of the Nation's bridges located on public roads, including Interstate Highways,...

  16. Bridge Engineering-Oriented Parametric Model

    Institute of Scientific and Technical Information of China (English)

    周凌远; 李乔

    2004-01-01

    A new model is proposed to improve the efficiency of structural modeling. In this model, the bridge structural components are expressed with component description, parametric description and geometric description in a software system. This model provides both convenience and flexibility for users in structural modeling process. The object-oriented method is applied in the model implementation. A bridge analysis preprocessor is developed on the basis of this model. It provides an effective way for bridge modeling.

  17. Proposed Requirements-driven User-scenario Development Protocol for the Belmont Forum E-Infrastructure and Data Management Cooperative Research Agreement

    Science.gov (United States)

    Wee, B.; Car, N.; Percivall, G.; Allen, D.; Fitch, P. G.; Baumann, P.; Waldmann, H. C.

    2014-12-01

    The Belmont Forum E-Infrastructure and Data Management Cooperative Research Agreement (CRA) is designed to foster a global community to collaborate on e-infrastructure challenges. One of the deliverables is an implementation plan to address global data infrastructure interoperability challenges and align existing domestic and international capabilities. Work package three (WP3) of the CRA focuses on the harmonization of global data infrastructure for sharing environmental data. One of the subtasks under WP3 is the development of user scenarios that guide the development of applicable deliverables. This paper describes the proposed protocol for user scenario development. It enables the solicitation of user scenarios from a broad constituency, and exposes the mechanisms by which those solicitations are evaluated against requirements that map to the Belmont Challenge. The underlying principle of traceability forms the basis for a structured, requirements-driven approach resulting in work products amenable to trade-off analyses and objective prioritization. The protocol adopts the ISO Reference Model for Open Distributed Processing (RM-ODP) as a top level framework. User scenarios are developed within RM-ODP's "Enterprise Viewpoint". To harmonize with existing frameworks, the protocol utilizes the conceptual constructs of "scenarios", "use cases", "use case categories", and use case templates as adopted by recent GEOSS Architecture Implementation Project (AIP) deliverables and CSIRO's eReefs project. These constructs are encapsulated under the larger construct of "user scenarios". Once user scenarios are ranked by goodness-of-fit to the Belmont Challenge, secondary scoring metrics may be generated, like goodness-of-fit to FutureEarth science themes. The protocol also facilitates an assessment of the ease of implementing given user scenario using existing GEOSS AIP deliverables. In summary, the protocol results in a traceability graph that can be extended to coordinate

  18. Knowledge engineering for health: A new discipline required to bridge the “ICT gap” between research and healthcare

    DEFF Research Database (Denmark)

    Beck, Tim; Gollapudi, Sirisha; Brunak, Søren;

    2012-01-01

    Despite vast amount of money and research being channeled toward biomedical research, relatively little impact has been made on routine clinical practice. At the heart of this failure is the information and communication technology “chasm” that exists between research and healthcare. A new focus...... use; conversely, making outcomes from the practice of medicine suitably available for use by the research community. This system will be able to self‐optimize in that outcomes for patients treated by decisions that were based on the latest research knowledge will be fed back to the research world....... A series of meetings, culminating in the “I‐Health 2011” workshop, have brought together interdisciplinary experts to map the challenges and requirements for such a system. Here, we describe the main conclusions from these meetings. An “I4Health” interdisciplinary network of experts now exists to promote...

  19. Thermal bridges of modern windows

    DEFF Research Database (Denmark)

    Hansen, Ernst Jan de Place; Møller, Eva B.; Nielsen, Anker;

    2013-01-01

    With its focus on reduced energy consumption, contemporary housing construction requires a highly insulated and airtight building envelope with as few thermal bridges as possible.Windows must be carefully designed, as thermal bridges can lead to surface condensation or mold growth, even if the wi...

  20. Observing the user experience a practitioner's guide to user research

    CERN Document Server

    Kuniavsky, Mike; Goodman, Elizabeth

    2012-01-01

    The gap between who designers and developers imagine their users are, and who those users really are can be the biggest problem with product development. Observing the User Experience will help you bridge that gap to understand what your users want and need from your product, and whether they'll be able to use what you've created. Filled with real-world experience and a wealth of practical information, this book presents a complete toolbox of techniques to help designers and developers see through the eyes of their users. It provides in-depth coverage of 13 user experience research techniques

  1. Building Bridges

    DEFF Research Database (Denmark)

    The report Building Bridges adresses the questions why, how and for whom academic audience research has public value, from the different points of view of the four working groups in the COST Action IS0906 Transforming Audiences, Transforming Societies – “New Media Genres, Media Literacy and Trust...... in the Media”, “Audience Interactivity and Participation”, “The Role of Media and ICT Use for Evolving Social Relationships” and “Audience Transformations and Social Integration”. Building Bridges is the result of an ongoing dialogue between the Action and non-academic stakeholders in the field of audience...

  2. Integrating Real-time Bridge Scouring Monitoring System with Mobile Location-Based Services

    Directory of Open Access Journals (Sweden)

    Yung-Bin Lin

    2011-12-01

    Full Text Available Typhoons and torrential rains not only erode river beds and coasts and damage river-crossing structures, but also affect the geomorphology and topography of rivers and coasts. Additionally, typhoons and torrential rains cause debris flows and flooding in metropolitan areas and threaten the safety of people’s lives and properties. Disaster prevention and reduction of damage caused by typhoons and torrential rains have always been a crucial task of government agencies. Bridges in Taiwan are generally old and have insufficient shock resistance; some bridge foundations are also severely eroded and exposed. Because of global climate changes in recent years, rainfall has become comparatively heavy and rapid. Furthermore, the soil in mountain areas has softened because of factors such as earthquakes or human developments. Debris rushes down with rain every time a torrential rain strikes, significantly impacting the safety of bridges downstream. Although government bridge management units have made budget plans to progressively renovate dangerous old bridges, these bridges are still being use for traffic and transportation. These dangerous old bridges pose a serious threat to the safety of people when an earthquake, typhoon, or flood occurs. During typhoons and floods, increased water levels and changes of the scouring depths have dramatic effects on the safety of bridges. The bridge maintenance unit currently uses the water level and water flow conditions as references when determining whether to close a bridge; however, this is not a good permanent solution. A bridge scour monitoring and warning system that is stable, reliable, and operates normally under flood attacks is required for on-site installation and verification. In recent years, the applied technologies of smart phones have expanded beyond entertainment and communication. Mobile communications are used to transmit relevant information to bridge maintenance and management units and road

  3. User Requirements for the Application of Remote Sensing in the Planning and Management of Water Resource Systems

    Science.gov (United States)

    Burgy, R. H.

    1972-01-01

    Data relating to hydrologic and water resource systems and subsystems management are reported. Systems models, user application, and remote sensing technology are covered. Parameters governing water resources include evaportranspiration, vegetation, precipitation, streams and estuaries, reservoirs and lakes, and unsaturate and saturated soil zones.

  4. 15 CFR Supplement No. 8 to Part 748 - Information Required in Requests for Validated End-User (Veu) Authorization

    Science.gov (United States)

    2010-01-01

    ... structure, ownership and business of the prospective validated end-user. Include a description of the entity..., as appropriate; technical parameters for the items including performance specifications; and end-use... overview of any business activity or corporate relationship that the entity has with either government...

  5. Transition Slabs of Integral Abutment Bridges

    OpenAIRE

    Dreier, Damien; Muttoni, Aurelio; BURDET, Olivier

    2011-01-01

    Over the past decades, an increasing number of bridges with integral abutment have been built in Switzerland. This type of bridge offers various advantages over standard bridges with abutments, equipped with expansion joints and bearings that require regular inspection and maintenance. One main concern of integral abutment bridges is related to the soil-structure interaction, in particular between the transition slab and the embankment. To avoid any expansion joints, transition slabs are dire...

  6. Implementation of a Microcomputer-Based Medical Information System for Nuclear Submarines Requires a Flexible, Multimedia Approach to User Training

    OpenAIRE

    Henderson, Joseph V.; Robinson, Karen D.; Post, Richard S.; Decora, Mark; Ryack, Bernard L.

    1981-01-01

    A microcomputer-based medical information system for nuclear submarines is ready for fleet-wide implementation. Experience with such systems in the past indicates that successful implementation depends strongly on training of the system's users, in this case Hospital Corpsmen. Because Corpsmen may lack essential clinical skills and because they are geographically dispersed, a syllabus and special education tools have been developed that can accomplish the educational goals, be used for indivi...

  7. NON-TECHNICAL COMPETENCIES REQUIRED FOR INFORMATION TECHNOLOGY PROFESSIONALS: HOW TO EFFECTIVELY INTERACT WITH CLIENTS/USERS

    OpenAIRE

    Bubaš, Goran; Aurer, Boris

    1998-01-01

    After considering reasons for developing the competencies of information technology (IT) professionals, so me of their key non-technical competencies are identified and discussed. Focusing on competence in their communicative interactions, results are presented from a survey which was performed to identify specific components of competence in interaction with clients/users. A total of 150 traits was evaluated by 424 IT professionals. Four factors have been found to contribute lo competence in...

  8. Transparent User Authentication

    CERN Document Server

    Clarke, Nathan

    2011-01-01

    This groundbreaking text examines the problem of user authentication from a completely new viewpoint. Rather than describing the requirements, technologies and implementation issues of designing point-of-entry authentication, the book introduces and investigates the technological requirements of implementing transparent user authentication -- where authentication credentials are captured during a user's normal interaction with a system. This approach would transform user authentication from a binary point-of-entry decision to a continuous identity confidence measure. Topics and features: discu

  9. Stone bridges

    Czech Academy of Sciences Publication Activity Database

    Drdácký, Miloš; Slížková, Zuzana

    Prague : Institute of theoretical and applied mechanics AS CR, v.v.i, 2011 - (Drdácký, M.; Binda, L.; Hennen, I.; Kőpp, C.; Lanza, L.), s. 122-129 ISBN 978-80-86246-37-6 Grant ostatní: evropská komise(XE) CHEF-SSPI-044251 Institutional research plan: CEZ:AV0Z20710524 Keywords : flood * stone bridge * cultural heritage Subject RIV: AL - Art, Architecture, Cultural Heritage

  10. Operating the EOSDIS at the Land Processes DAAC Managing Expectations, Requirements, and Performance Across Agencies, Missions, Instruments, Systems, and User Communities

    Science.gov (United States)

    Kalvelage, Thomas A.

    2002-09-01

    NASA developed the Earth Observing System (EOS) during the 1990's. At the Land Processes Distributed Active Archive Center (LP DAAC), located at the USGS EROS Data Center, the EOS Data and Information System (EOSDIS) is required to support heritage missions as well as Landsat 7, Terra, and Aqua. The original system concept of the early 1990's changed as each community had its say -- first the managers, then engineers, scientists, developers, operators, and then finally the general public. The systems at the LP DAAC -- particularly the largest single system, the EOSDIS Core System (ECS) -- are changing as experience accumulates, technology changes, and each user group gains influence. The LP DAAC has adapted as contingencies were planned for, requirements and therefore plans were modified, and expectations changed faster than requirements could hope to be satisfied. Although not responsible for Quality Assurance of the science data, the LP DAAC works to ensure the data are accessible and useable by influencing systems, capabilities, and data formats where possible, and providing tools and user support as necessary. While supporting multiple missions and instruments, the LP DAAC also works with and learns from multiple management and oversight groups as they review mission requirements, system capabilities, and the overall operation of the LP DAAC. Stakeholders, including the Land Science community, are consulted regularly to ensure that the LP DAAC remains cognizant and responsive to the evolving needs of the user community. Today, the systems do not look or function as originally planned, but they do work, and they allow customers to search and order of an impressive amount of diverse data.

  11. No perfect tools: trade-offs of sustainability principles and user requirements in designing support tools for land-use decisions between greenfields and brownfields.

    Science.gov (United States)

    Bartke, Stephan; Schwarze, Reimund

    2015-04-15

    The EU Soil Thematic Strategy calls for the application of sustainability concepts and methods as part of an integrated policy to prevent soil degradation and to increase the re-use of brownfields. Although certain general principles have been proposed for the evaluation of sustainable development, the practical application of sustainability assessment tools (SATs) is contingent on the actual requirements of tool users, e.g. planners or investors, to pick up such instruments in actual decision making. We examine the normative sustainability principles that need to be taken into account in order to make sound land-use decisions between new development on greenfield sites and the regeneration of brownfields - and relate these principles to empirically observed user requirements and the properties of available SATs. In this way we provide an overview of approaches to sustainability assessment. Three stylized approaches, represented in each case by a typical tool selected from the literature, are presented and contrasted with (1) the norm-oriented Bellagio sustainability principles and (2) the requirements of three different stakeholder groups: decision makers, scientists/experts and representatives of the general public. The paper disentangles some of the inevitable trade-offs involved in seeking to implement sustainable land-use planning, i.e. between norm orientation and holism, broad participation and effective communication. It concludes with the controversial assessment that there are no perfect tools and that to be meaningful the user requirements of decision makers must take precedence over those of other interest groups in the design of SATs. PMID:25645951

  12. Operating the EOSDIS at the land processes DAAC managing expectations, requirements, and performance across agencies, missions, instruments, systems, and user communities

    Science.gov (United States)

    Kalvelage, T.A.

    2002-01-01

    NASA developed the Earth Observing System (EOS) during the 1990'S. At the Land Processes Distributed Active Archive Center (LP DAAC), located at the USGS EROS Data Center, the EOS Data and Information System (EOSDIS) is required to support heritage missions as well as Landsat 7, Terra, and Aqua. The original system concept of the early 1990'S changed as each community had its say - first the managers, then engineers, scientists, developers, operators, and then finally the general public. The systems at the LP DAAC - particularly the largest single system, the EOSDIS Core System (ECS) - are changing as experience accumulates, technology changes, and each user group gains influence. The LP DAAC has adapted as contingencies were planned for, requirements and therefore plans were modified, and expectations changed faster than requirements could hope to be satisfied. Although not responsible for Quality Assurance of the science data, the LP DAAC works to ensure the data are accessible and useable by influencing systems, capabilities, and data formats where possible, and providing tools and user support as necessary. While supporting multiple missions and instruments, the LP DAAC also works with and learns from multiple management and oversight groups as they review mission requirements, system capabilities, and the overall operation of the LP DAAC. Stakeholders, including the Land Science community, are consulted regularly to ensure that the LP DAAC remains cognizant and responsive to the evolving needs of the user community. Today, the systems do not look or function as originally planned, but they do work, and they allow customers to search and order of an impressive amount of diverse data.

  13. Applications of overburden conveyor bridges

    Energy Technology Data Exchange (ETDEWEB)

    Schachtschneider, H.

    1987-06-01

    In large scale surface mines of the capacities required today, a cross-pit operation with overburden conveyor bridges is the most economical method of overburden removal and disposal. In order to provide the production capacity required in surface mining equipment by the GDR brown coal industry, VEB Schwermaschinenbau Lauchhammerwerk undertook the design and manufacture of standard overburden conveyor bridges for cut heights of 34 m, 45 m and 60 m. All three base types may be equipped to match the site specific geological and geotechnical conditions, and to meet customer's demands. Specifications of the bridges are given as well as details of conveyor belt speeds, modifications to the standards, and number manufactured. Design problems faced with the 60 m bridge are discussed, together with details of the superstructure, method of operation, transportation rates, structural steel used, assembly and power supply. 5 refs.

  14. User-centered design

    International Nuclear Information System (INIS)

    The simplification philosophy, as an example, that both of EPRI-URD and EUR emphasize is treated mostly for the cost reduction of the nuclear power plants, but not for the simplification of the structure of user's tasks, which is one of the principles of user-centered design. A user-centered design is a philosophy based on the needs and interests of the user, with an emphasis on making products usable and understandable. However, the nuclear power plants offered these days by which the predominant reactor vendors are hardly user-centered but still designer-centered or technology-centered in viewpoint of fulfilling user requirements. The main goal of user-centered design is that user requirements are elicited correctly, reflected properly into the system requirements, and verified thoroughly by the tests. Starting from the user requirements throughout to the final test, each requirement should be traceable. That's why requirement traceability is a key to the user-centered design, and main theme of a requirement management program, which is suggested to be added into EPRI-URD and EUR in the section of Design Process. (author)

  15. User Interface Requirements for Web-Based Integrated Care Pathways: Evidence from the Evaluation of an Online Care Pathway Investigation Tool.

    Science.gov (United States)

    Balatsoukas, Panos; Williams, Richard; Davies, Colin; Ainsworth, John; Buchan, Iain

    2015-11-01

    Integrated care pathways (ICPs) define a chronological sequence of steps, most commonly diagnostic or treatment, to be followed in providing care for patients. Care pathways help to ensure quality standards are met and to reduce variation in practice. Although research on the computerisation of ICP progresses, there is still little knowledge on what are the requirements for designing user-friendly and usable electronic care pathways, or how users (normally health care professionals) interact with interfaces that support design, analysis and visualisation of ICPs. The purpose of the study reported in this paper was to address this gap by evaluating the usability of a novel web-based tool called COCPIT (Collaborative Online Care Pathway Investigation Tool). COCPIT supports the design, analysis and visualisation of ICPs at the population level. In order to address the aim of this study, an evaluation methodology was designed based on heuristic evaluations and a mixed method usability test. The results showed that modular visualisation and direct manipulation of information related to the design and analysis of ICPs is useful for engaging and stimulating users. However, designers should pay attention to issues related to the visibility of the system status and the match between the system and the real world, especially in relation to the display of statistical information about care pathways and the editing of clinical information within a care pathway. The paper concludes with recommendations for interface design. PMID:26446014

  16. Decision support system for integrating remote sensing in bridge condition assessment and preservation

    Science.gov (United States)

    Endsley, Arthur; Brooks, Colin; Harris, Devin; Ahlborn, Tess; Vaghefi, Khatereh

    2012-04-01

    Since the National Bridge Inventory (NBI) was first conducted, structural health monitoring (SHM) of U.S. bridge infrastructure has consisted largely of time and labor-intensive surveys with subjective results. In-situ and embedded sensors, while more reliable and accurate, can be costly and in many cases infeasible for SHM because they require installation in hard-to-reach places or during construction. Remote sensing (RS) technologies such as radar, electrooptical imaging and laser scanning may offer an innovative, cost-effective method of monitoring the dynamic conditions of U.S. bridges in real-time. While some RS techniques may be costly for state agencies to deploy on their own, RS imagery is available through government agencies or commercial vendors for moderate or no cost. How can disparate RS datasets be integrated with one another and with inventory data in a way that is meaningful to bridge asset management decision makers? This paper discusses the development and functionality of the Bridge Condition Decision Support System (DSS), a web-based asset management tool for bridge managers and inspectors. The DSS seamlessly merges bridge metrics from RS data with NBI inventory data allowing decision makers to compare up-to-date bridge condition metrics from multiple inputs as a time series. It enables analysis of RS and inventory data available through user-friendly web services which can also expose virtually unlimited server-side data processing. Using open-source software, the authors developed a scalable, spatially-aware bridge condition database with a fast and flexible server application programming interface (API) and a cross-browser compatible web mapping application written in Javascript.

  17. System Requirement in View of Users and Process for Content Management and Academic Support System for Computer Laboratory

    OpenAIRE

    Win Ce; Hanny Juwitasary; Hendro

    2015-01-01

    The system for Laboratory Information will take focus on determining the need for information systems related to the management, content development and academic management in the laboratory. These processes will focus on understanding the need and system requirement for a laboratory information system that focus on content management and the way to design a process to make sure the continuation of content creation can be done. With the design of the laboratory information system is expected ...

  18. Small-scale (flash) flood early warning in the light of operational requirements: opportunities and limits with regard to user demands, driving data, and hydrologic modeling techniques

    Science.gov (United States)

    Philipp, Andy; Kerl, Florian; Büttner, Uwe; Metzkes, Christine; Singer, Thomas; Wagner, Michael; Schütze, Niels

    2016-05-01

    In recent years, the Free State of Saxony (Eastern Germany) was repeatedly hit by both extensive riverine flooding, as well as flash flood events, emerging foremost from convective heavy rainfall. Especially after a couple of small-scale, yet disastrous events in 2010, preconditions, drivers, and methods for deriving flash flood related early warning products are investigated. This is to clarify the feasibility and the limits of envisaged early warning procedures for small catchments, hit by flashy heavy rain events. Early warning about potentially flash flood prone situations (i.e., with a suitable lead time with regard to required reaction-time needs of the stakeholders involved in flood risk management) needs to take into account not only hydrological, but also meteorological, as well as communication issues. Therefore, we propose a threefold methodology to identify potential benefits and limitations in a real-world warning/reaction context. First, the user demands (with respect to desired/required warning products, preparation times, etc.) are investigated. Second, focusing on small catchments of some hundred square kilometers, two quantitative precipitation forecasts are verified. Third, considering the user needs, as well as the input parameter uncertainty (i.e., foremost emerging from an uncertain QPF), a feasible, yet robust hydrological modeling approach is proposed on the basis of pilot studies, employing deterministic, data-driven, and simple scoring methods.

  19. Home care robot for socially supporting the elderly: focus group studies in three European countries to screen user attitudes and requirements.

    Science.gov (United States)

    Zsiga, Katalin; Edelmayer, Georg; Rumeau, Pierre; Péter, Orsolya; Tóth, András; Fazekas, Gábor

    2013-12-01

    The growing number of elderly individuals presents new challenges for society. Many elderly individuals have physical or cognitive impairments and require support from caregivers. An attempt to overcome the limitations caused by the lack of human caregivers is the inclusion of assistive technology such as socially active robots. The Domeo-project of the Ambient Assisted Living Joint Programme of the European Union aims to develop a new companion robotic system that would allow assistance to the elderly. The requirements and attitude of the potential users and caregivers have been assessed in Austria, France and Hungary. The robot functions were demonstrated to the participants. Three focus groups were formed: potential end users, older caregivers and younger caregivers. The discussions were recorded and processed according to six aspects: (i) acceptability and privacy, (ii) pertinence of services, (iii) possible obstacles, (iv) motivation level to use the proposed services, (v) organizational issues and (vi) recommendations. Minor differences were observed between the countries, but there were considerable differences regarding the age of the participants. The younger caregivers want to be assured of the safety of their client and to receive immediate notification in case of an emergency. As for the elderly, the most important aspect is to gain a companion and a physical helper. Many of the recommendations can be taken into consideration during robot development, but some of them are not realistic at present. PMID:24189106

  20. Civil and environmental engineering faculty members to serve as principal investigators on bridge project

    OpenAIRE

    Daniilidi, Christina

    2009-01-01

    Is there a doctor in the house to check on this bridge? A bridge is like a living organism. It requires frequent health check-ups and maintenance, and its lifespan is 50 years on the average. With limited resources and an aging bridge population, bridge owners need reliable information on bridge health in order to manage their bridge inventory efficiently and economically. Although the tragic bridge collapse in Minneapolis in the summer of 2007 was not attributed to poor maintenance, everyone...

  1. Evaluation of Legal Data Protection Requirements in Cloud Services in the Context of Contractual Relations with End-Users

    Directory of Open Access Journals (Sweden)

    Darius Štitilis

    2014-03-01

    Full Text Available Purpose – to analyse the compliance with basic principles of data protection in selected consumer oriented cloud services contracts, and also to highlight the adequate level of data protection in the mentioned contracts, evaluating existing data protection directive 95/46/EC, also proposed General data protection regulation.Design/methodology/approach – various survey methods have been used in the work integrated. Documental analysis method has been used in analysis of scientific literature, legal acts and other documents, where aspects of legal data protection requirements have been included. Legal documents analysis method together with logical-analytic method has been used in analysing Directive 95/46/EU, Proposal for a regulation of the European Parliament and of the Council and jurisprudence of the European Court of Human Rights. Comparative method has been applied for revealing difference between particular cloud services contracts and also comparing the compliance of cloud services contracts to requirements of basic European data protection principles, established in the international documents.Findings – from the brief analysis of selected consumer oriented cloud service providers, it may be implied that more or less all the legal principles, established in the legal acts, are reflected in the privacy policies and/or service agreements. However, it shall be noted that there is a big difference in wording of the analysed documents. Regarding other principles, all examined cloud service providers do not have indemnification provisions regarding unlawful use of personal data.Research limitations/implications – the concept of the contract was presented in a broad sense, including the privacy policies and/or terms and conditions of the service providers. In accordance with the content of the principles, the authors grouped data protection principles, applied in cloud services into fundamental and recommendatory.Practical implications

  2. TASS/SMR Code Topical Report for SMART Plant, Vol II: User's Guide and Input Requirement

    Energy Technology Data Exchange (ETDEWEB)

    Kim, See Darl; Kim, Soo Hyoung; Kim, Hyung Rae (and others)

    2008-10-15

    The TASS/SMR code has been developed with domestic technologies for the safety analysis of the SMART plant which is an integral type pressurized water reactor. It can be applied to the analysis of design basis accidents including non-LOCA (loss of coolant accident) and LOCA of the SMART plant. The TASS/SMR code can be applied to any plant regardless of the structural characteristics of a reactor since the code solves the same governing equations for both the primary and secondary system. The code has been developed to meet the requirements of the safety analysis code. This report describes the overall structure of the TASS/SMR, input processing, and the processes of a steady state and transient calculations. In addition, basic differential equations, finite difference equations, state relationships, and constitutive models are described in the report. First, the conservation equations, a discretization process for numerical analysis, search method for state relationship are described. Then, a core power model, heat transfer models, physical models for various components, and control and trip models are explained.

  3. Cable Supported Bridges

    DEFF Research Database (Denmark)

    Gimsing, Niels Jørgen

    Cable supported bridges in the form of suspension bridges and cable-stayed bridges are distinguished by their ability to overcome large spans.The book concentrates on the synthesis of cable supported bridges, covering both design and construction aspects. The analytical part covers simple methods...

  4. Assessment of the portable radiophone users' exposure to electromagnetic fields, with use of numerical simulations and Directive 2013/35/EU requirements

    Directory of Open Access Journals (Sweden)

    Patryk Zradziński

    2013-12-01

    Full Text Available Background: The assessment of electromagnetic field distribution near radiophones and their use warranted an analysis of thermal exposure hazards and related health effects, based on i.e. numerical calculations of specific energy absorption rate (SAR. Materials and Methods: The investigation concerned radiophones of conventional and trunked communication systems. Electromagnetic hazards assessment involved numerical simulations of SAR inside users' models (male and female for 5 radiophones locations - near the ear, arm, chest, hip and face. Results: Maximum SAR (10 g values depend on radiophone type, output power and locations. Near the chest, hip and face they are 6-, 2- and 2-fold higher than for location near the ear. SAR (10 g may exceed Directive 2013/35/EU limits at maximum (4 W output power of conventional radiophones, and the distance between antenna and worker's body shorter than 5 cm. SAR (10 g values near trunked radiophones do not exceed 35% of the Directive limits. The Polish safety and health regulations in particular cases of radiophones use and local exposure may not guarantee the compliance with Directive 2013/35/EU requirements, i.e. SAR (10 g may locally exceed exposure limit values (ELVs during exposure to electromagnetic fields of hazardous, and even intermediate zones. Conclusions: It was demonstrated that exposure of trunked radiophones users does not exceed the limits laid down in the Polish safety and health regulations and Directive 2013/35/EU, however, in particular scenarios of the conventional radiophones use overexposure can be observed. The results showed that in exposure to electromagnetic field emitted by sources located near workers' body there is a need for more detailed analysis of the compliance of Polish safety and health regulations with Directive 2013/35/EU requirements. Med Pr 2013;64(6:817–827

  5. IceBridge Data Management and Access Strategies at NSIDC

    Science.gov (United States)

    Oldenburg, J.; Tanner, S.; Collins, J. A.; Lewis, S.; FitzGerrell, A.

    2013-12-01

    NASA's Operation IceBridge (OIB) mission, initiated in 2009, collects airborne remote sensing measurements over the polar regions to bridge the gap between NASA's Ice, Cloud and Land Elevation satellite (ICESat) mission and the upcoming ICESat-2 mission in 2016. OIB combines an evolving mix of instruments to gather data on topography, ice and snow thickness, high-resolution photography, and other properties that are more difficult or impossible to measure via satellite. Once collected, these data are stored and made available at the National Snow and Ice Data Center (NSIDC) in Boulder, Colorado. To date, there are nearly 90 terabytes of data available, and there are about three more years of data collection left. The main challenges faced in data management at NSIDC are derived from the quantity and heterogeneity of the data. To deal with the quantity of data, the technical teams at NSIDC have significantly automated the data ingest, metadata generation, and other required data management steps. Heterogeneity of data and the evolution of the Operation over time make technical automation complex. To limit complexity, the IceBridge team has agreed to such practices as using specific data file formats, limiting file sizes, using specific filename templates, etc. These agreements evolve as Operation IceBridge moves forward. The metadata generated about the flights and the data collected thereon make the storage of the data more robust, and enable data discoverability. With so much metadata, users can search the vast collection with ease using specific parameters about the data they seek. An example of this in action is the IceBridge data portal developed at NSIDC, http://nsidc.org/icebridge/portal/. This portal uses the GPS data from the flights projected onto maps as well as other flight and instrument metadata to help the user find the exact data file they seek. This implementation is only possible with dependable data management beneath the surface. The data files

  6. Basic Requirements of Tuned Mass Damper for Bridges and the Eddy Current TMD%桥梁用TMD的基本要求与电涡流TMD

    Institute of Scientific and Technical Information of China (English)

    陈政清; 黄智文; 王建辉; 牛华伟

    2013-01-01

    The performances of traditional tuned mass damper (TMD) intended for suppressing the vortex-induced oscillation of bridges were invesitgated.In order to improve the robustness of traditional TMD,multiple tuned mass dampers (MTMD) theory was proposed to design TMDs.Furthermore,a new damper,namely the eddy current damper,was developed to repalce traditional oil damper as the damping producer of TMD,so the fatigue life-span of TMD was greatly extended.The parameter design of MTMD was realized by making use of genetic algorithm.And the results of comparison between TMD and MTMD have indicated that MTMD is superior to TMD,when their effectiveness and robustness are of equivalent importance in design.Both experiments and engineering practice of eddy current TMD were successfully conducted,showing a promising future of eddy current TMD in the field of bridge vibration control.%总结了传统调谐质量阻尼器(TMD)在涡激振动控制中的工作性能,提出运用多重调谐质量阻尼器(MTMD)理论进行TMD设计,提高振动控制的鲁棒性;开发了电涡流阻尼器取代传统油阻尼器作为TMD的阻尼发生装置,延长TMD的疲劳寿命.利用遗传算法实现了MTMD的参数优化设计,与TMD的比较表明,MTMD在控制效率和鲁棒性方面具有更优越的综合性能.电涡流TMD在试验和实际工程中的成功应用表明电涡流TMD在桥梁振动控制领域具有广阔的应用前景.

  7. Full-bridge capacitive extensometer

    Science.gov (United States)

    Peters, Randall D.

    1993-08-01

    Capacitive transducers have proven to be very effective sensors of small displacements, because of inherent stability and noninvasive high resolution. The most versatile ones have been those of a differential type, in which two elements are altered in opposite directions in response to change of the system parameter being monitored. Oftentimes, this differential pair has been incorporated into a bridge circuit, which is a useful means for employing synchronous detection to improve signal to noise ratios. Unlike previous differential capacitive dilatometers which used only two active capacitors, the present sensor is a full-bridge type, which is well suited to measuring low-level thermal expansions. This analog sensor is capable of 0.1 μm resolution anywhere within a range of several centimeters, with a linearity of 0.1%. Its user friendly output can be put on a strip chart recorder or directed to a computer for sophisticated data analysis.

  8. Understanding users

    DEFF Research Database (Denmark)

    Johannsen, Carl Gustav Viggo

    2014-01-01

    Segmentation of users can help libraries in the process of understanding user similarities and differences. Segmentation can also form the basis for selecting segments of target users and for developing tailored services for specific target segments. Several approaches and techniques have been te...... segmentation project using computer-generated clusters. Compared to traditional marketing texts, this article also tries to identify user segments or images or metaphors by the library profession itself.......Segmentation of users can help libraries in the process of understanding user similarities and differences. Segmentation can also form the basis for selecting segments of target users and for developing tailored services for specific target segments. Several approaches and techniques have been...... tested in library contexts and the aim of this article is to identify the main approaches and to discuss their perspectives, including their strenghts and weaknesses in, especially, public library contexts. The purpose is also to prsent and discuss the results of a recent - 2014 - Danish library user...

  9. Bridge Aesthetics and Structural Honesty

    DEFF Research Database (Denmark)

    Gimsing, Niels Jørgen

    1999-01-01

    In bridges the overall form must be chosen with due respect to the transmission of forces if efficient structures shall be created, The design must therefore be governed by experienced structural engineers - in some cases assisted by aesthetic advisers on specific issues. Some basic requirements ...

  10. Bridging the digital divide with mobile services

    CERN Document Server

    Yelton, Andromeda

    2013-01-01

    In this issue of Library Technology Reports, Andromeda Yelton shows how libraries can build on the breadth of this population to help bridge the digital divide and provide even greater access to information. Yelton breaks down the demographics of mobile internet users, provides examples of how different libraries are reaching out to these populations, and suggests what the future may hold for this trend.

  11. MULTIPHASE BLASTING OF THE BRIDGE ACROSS THE DRENICA RIVER

    OpenAIRE

    Branko Božić

    1989-01-01

    The construction of new bridges on the sites of the existing ones require demolition of the old bridge. Due to closeness of newly erected bridge elements the fundations of old bridges are demolished by multiphase blasting process. The blasting of the piers and anchorages of the bridge across 'the Drenica river carrying the Balačevac—Goleš industrial railway was done in four phases. The piers and anchorages of a new bridge and its construction elements have been erected before (the paper is pu...

  12. E-health Support in People with Parkinson's Disease with Smart Glasses: A Survey of User Requirements and Expectations in the Netherlands.

    Science.gov (United States)

    Zhao, Yan; Heida, Tjitske; van Wegen, Erwin E H; Bloem, Bastiaan R; van Wezel, Richard J A

    2015-01-01

    Recent advances in smart glasses, wearable computers in the form of glasses, bring new therapeutic and monitoring possibilities for people with Parkinson's disease (PD). For example, it can provide visual and auditory cues during activities of daily living that have long been used to improve gait disturbances. Furthermore, smart glasses can personalize therapies based on the state of the user and/or the user environment in real-time using object recognition and motion tracking. To provide guidelines for developers in creating new PD applications for smart glasses, a self-reported questionnaire was designed to survey the requirements, constraints, and attitudes of people with PD with respect to this new technology. The survey was advertised online over an 11 month period on the website of the Parkinson Vereninging. The results were derived from 62 participants (54.8% men and 45.2% women, average age of 65.7 ± 9.1), representing a response rate of 79.5% . The participants were overall very enthusiastic about smart glasses as an assistive technology to facilitate daily living activities, especially its potential to self-manage motor problems and provide navigational guidance, thereby restoring their confidence and independence. The reported level of usage of mobile technologies like tablets and smartphones suggests that smart glasses could be adopted relatively easily, especially by younger people with PD. However, the respondents were concerned about the cost, appearance, efficacy, and potential side effects of smart glasses. To accommodate a wide range of symptoms, personal preferences, and comfort level with technology, smart glasses should be designed to allow simple operation and personalization. PMID:25855044

  13. Bridge Coupler for APT

    CERN Document Server

    Greninger, P T; Spalek, G; Greninger, Paul T.; Rodarte, Henry J.

    2000-01-01

    The Coupled Cavity Drift Tube Linac (CCDTL) used in the Accelerator for the Production of Tritium (APT) is fully described elsewhere [1]. The modules are composed of several machined and brazed segments that must account for the accumulation of dimensional tolerances in the build up of the stack. In addition, space requirements dictate that power fed to the accelerator cannot be through the accelerating cavities. As well, we would like to remove a single segment of the accelerator without removing additional segments. These requirements combined with phasing relationships of the design and space limitations have resulted in a different bridge coupling method used in the module comprising 3-gap segments. The coupling method, phasing relationships and other features that enhance the flexibility of the design will be discussed.

  14. A Comparison of Half Bridge & Full Bridge Isolated DC-DC Converters for Electrolysis Application

    OpenAIRE

    R.Samuel Rajesh Babu; Joseph Henry

    2011-01-01

    This paper presents a comparison of half bridgeand full bridge isolated, soft-switched, DC-DC converters forElectrolysis application. An electrolyser is a part of renewableenergy system which generates hydrogen from water electrolysisthat used in fuel cells. A DC-DC converter is required to coupleelectrolyser to system DC bus. The proposed DC-DC converter isrealized in both full-bridge and half-bridge topology in order toachieve zero voltage switching for the power switches and toregulate the...

  15. The Users Office turns 20

    CERN Multimedia

    2009-01-01

    20 years ago, in the summer of 1989, an office was created to assist the thousands of users who come to CERN each year, working over the broad range of projects and collaborations. Chris Onions (right), head of the Users’ Office, with Bryan Pattison (left), the Office’s founder.Before the inception of the Users Office, it was common for users to spend at least an entire day moving from office to office in search of necessary documentation and information in order to make their stay official. "Though the Office has undergone various changes throughout its lifetime, it has persisted in being a welcoming bridge to facilitate the installation of visitors coming from all over the world", says Chris Onions, head of the Users Office. This September, the Office will celebrate its 20-year anniversary with a drink offered to representatives of the User community, the CERN management and staff members from the services with whom the Office is involved. &...

  16. SOFC - Manufacture of stacks for test and demonstration related activities, stack and system tests and identification of end user requirements. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Jacobsen, Joachim; Primdahl, S.; Boegh Elmose, H.; Weineisen, H.; Richter, A.

    2008-11-15

    The aim of the project was to solve the technical challenges in relation to stack functionality in connection with operation of multi stack assemblies under realistic operating conditions. It was the intention to make a targeted effort with the aim of developing a high performance stack technology suitable for both small and large units. An important part of the project was the testing of stack assemblies up to 10 kW power range with relevant fuel and realistic operation condition in the test facility at HC OErstedvaerket. The manufacturing of stacks in the project was as planned a number of stacks (70 kW) for use in demonstration projects both for single stacks and for multi stack assemblies. The start up of the work on the SOFC test facility at HC OErstedsvaerket (HCV) was delayed due to a late delivery of the unit from the PSO 6385 project. A number of unforeseen events during the project have meant that the SOFC test facility at HCV has not until now been ready for performing tests. The experience gained from the operation of a 20 kW Alpha unit in a co-operation between TOFC and Waertsilae now provides an important contribution to the future multi stack assemblies. The work on identification of end user requirements has resulted in a number of different development priorities for the m-CHP and the Distributed Generation market segments. (au)

  17. User design

    CERN Document Server

    Carr-Chellman, Alison A

    2012-01-01

    User Design offers a fresh perspective on how front-line learners (users) can participate in the design of learning environments. The author challenges the universal assumption that front-line users must be relegated to the role of offering input, and that the actual design activity of learning systems must still be conducted only by experts. The book presents a new set of methods and strategies that show how the tools of professional designers can be effectively shared with broad groups of users and other participants in the process of creating their own learning. Drawing

  18. Advanced Spectrum Resource Allocation Algorithm Based on User Requirement%基于用户需求的改进型频谱资源分配算法

    Institute of Scientific and Technical Information of China (English)

    孔小丽; 周井泉

    2013-01-01

    In the wireless communication,reasonable effective allocation in the limited frequency is the key to realize cognitive radio net-work. According to the difference of the cognitive user’s requirement and the dissatisfied user’s demand,put forward an improved spec-trum resource allocation algorithm by the research of the preceding spectrum allocation algorithms which were built on the graph coloring theory. Analyzing the user’s demand,comparing the requirement with the utility,it seeks the user who has the most demand and maxi-mum utility and allocates it homologous spectrum. During the process of distribution,it updates the user’s needs to improve user’s satis-faction. Simulation results indicate that this algorithm can make the allocated frequency meeting the user’s requirement as soon as possi-ble,minimize the user’s unsatisfactory bandwidth demand and further raise the utilization rate of spectrum. So the advanced algorithm has superior in the performance.%  在无线通信中,对有限的频谱进行合理有效的分配是实现认知无线电技术的关键。针对认知用户需求的差异性以及用户需求得不到满足的特点,在图着色模型算法的研究基础上,提出了一种改进型频谱资源分配算法。该算法对用户需求和系统效益进行分析比较,选择需求大且效益高的用户进行分配。随着分配过程的进行,实时更新用户的需求以提高用户的满足度。仿真结果表明该算法能使分配的信道尽可能地满足用户的需求,最小化用户未满足的带宽需求,提高了频谱的利用率,因此具有一定的优越性。

  19. User 2020

    DEFF Research Database (Denmark)

    Porras, Jari; Heikkinen, Kari; Kinnula, Marianne;

    2014-01-01

    evolutionary process. The basis of this Outlook lies in studies of user generations. Although it’s controversial to do so, users have been divided into generations based on their ability and willingness to use ICT solutions. Whether the users are digital ‘tourists’, ‘immigrants’ or ‘natives’ is mainly...... determined by the era in which they were born. This is due to the fact that digital natives, born in an already “fully” digitalized world with a plethora of ICT services, have a much closer relationship to these solutions than generations before them. This has also shaped the users perspectives and had an...... effect on their future needs. Human needs have been studied much longer than user generations per se. Psychologist Maslow presented a characterization of human needs as early as 1943. This basic characterization was later studied with an evolving environment in mind. Although the basic needs have...

  20. User interface inspection methods a user-centered design method

    CERN Document Server

    Wilson, Chauncey

    2014-01-01

    User Interface Inspection Methods succinctly covers five inspection methods: heuristic evaluation, perspective-based user interface inspection, cognitive walkthrough, pluralistic walkthrough, and formal usability inspections. Heuristic evaluation is perhaps the best-known inspection method, requiring a group of evaluators to review a product against a set of general principles. The perspective-based user interface inspection is based on the principle that different perspectives will find different problems in a user interface. In the related persona-based inspection, colleagues assume the

  1. Generalized Gaussian Bridges

    CERN Document Server

    Sottinen, Tommi

    2012-01-01

    A generalized bridge is the law of a stochastic process that is conditioned on linear functionals of its path. We consider two types of representations of such bridges: orthogonal and canonical. In the canonical representation the filtrations and the linear spaces generated by the bridge process and the original process coincide. In the orthogonal representation the bridge is constructed from the entire path of the underlying process. The orthogonal representation is given for any continuous Gaussian process but the canonical representation is given only for so-called prediction-invertible Gaussian processes. Finally, we apply the canonical bridge representation to insider trading by interpreting the bridge from an initial enlargement of filtration point of view.

  2. Safety for Users

    CERN Multimedia

    HR Department

    2008-01-01

    CERN welcomes more than 8000 Users every year. The PH Department as host to these scientific associates requires the highest safety standards. The PH Safety Office has published a safety flyer for Users. Important safety topics and procedures are presented. Although the flyer is intended primarily to provide safety information for Users, the PH Safety Office invites all those on the CERN sites to keep a copy of the flyer as it gives guidance in matters of safety and explains what to do in the event of an emergency. The flyer is available at: http://ph-dep.web.cern.ch/ph-dep/Safety/SafetyOffice.html PH-Safety Office PH Department

  3. Safety for Users

    CERN Multimedia

    HR Department

    2008-01-01

    CERN welcomes more than 8000 Users every year. The PH Department as host to these scientific associates requires the highest safety standards. The PH Safety Office has published a Safety Flyer for Users. Important safety topics and procedures are presented. Although the Flyer is intended primarily to provide safety information for Users, the PH Safety Office invites all those on the CERN sites to keep a copy of the flyer as it gives guidance in matters of safety and explains what to do in the event of an emergency. Link: http://ph-dep.web.cern.ch/ph-dep/Safety/SafetyOffice.html PH-Safety Office PH Department

  4. 2015 Bridge Inspection ERC Training

    OpenAIRE

    Dougherty, Merril

    2015-01-01

    This presentation will discuss recent changes to the County Bridge Inspection Program from the perspective of both the FHWA and INDOT. We will also discuss the responsibilities of the local public agency’s (LPA’s) employee in responsible charge (ERC) with respect to managing this program. As this course is a yearly requirement, all county ERCs are encouraged to attend. Pre-registering is strongly encouraged by e-mailing your contact information to .

  5. Bridging the Gap

    DEFF Research Database (Denmark)

    Kramer Overgaard, Majken; Broeng, Jes; Jensen, Monika Luniewska;

    Bridging the Gap (BtG) is a 2-year project funded by The Danish Industry Foundation. The goal of Bridging the Gap has been to create a new innovation model which will increase the rate at which Danish universities can spinout new technology ventures.......Bridging the Gap (BtG) is a 2-year project funded by The Danish Industry Foundation. The goal of Bridging the Gap has been to create a new innovation model which will increase the rate at which Danish universities can spinout new technology ventures....

  6. Bridging the Gap

    OpenAIRE

    Kramer Overgaard, Majken; Broeng, Jes; Jensen, Monika Luniewska; Murdock, Karen; Schmidt, Iben Julie

    2015-01-01

    Bridging the Gap (BtG) is a 2-year project funded by The Danish Industry Foundation. The goal of Bridging the Gap has been to create a new innovation model which will increase the rate at which Danish universities can spinout new technology ventures. Bridging the Gap (BtG) is a 2-year project funded by The Danish Industry Foundation. The goal of Bridging the Gap has been to create a new innovation model which will increase the rate at which Danish universities can spinout new technology ve...

  7. Building Organic Bridges: Volume 1, Argentina - France

    OpenAIRE

    Rahmann, Gerold; Aksoy, Uygun

    2014-01-01

    [Foreword ...] The 18th IFOAM Organic World Congress held on 13-15 October, 2014 in Istanbul-Turkey targets to 'build organic bridges'. The Scientific track will contribute to bridging not only scientists but also institutions and disciplines, and to linking more developed and less developed, rural and urban, research to extension, plant to animal, farm practices to world-wide problems and producer and consumers. Organic is a management system that requires a diversity of inputs from differen...

  8. Building Organic Bridges: Volume 2, Germany - India

    OpenAIRE

    Rahmann, Gerold; Aksoy, Uygun

    2014-01-01

    [Foreword ...] The 18th IFOAM Organic World Congress held on 13-15 October, 2014 in Istanbul-Turkey targets to 'build organic bridges'. The Scientific track will contribute to bridging not only scientists but also institutions and disciplines, and to linking more developed and less developed, rural and urban, research to extension, plant to animal, farm practices to world-wide problems and producer and consumers. Organic is a management system that requires a diversity of inputs from differen...

  9. Identifying hidden sexual bridging communities in Chicago.

    Science.gov (United States)

    Youm, Yoosik; Mackesy-Amiti, Mary Ellen; Williams, Chyvette T; Ouellet, Lawrence J

    2009-07-01

    Bridge populations can play a central role in the spread of human immunodeficiency virus (HIV) by providing transmission links between higher and lower prevalence populations. While social network methods are well suited to the study of bridge populations, analyses tend to focus on dyads (i.e., risk between drug and/or sex partners) and ignore bridges between distinct subpopulations. This study takes initial steps toward moving the analysis of sexual network linkages beyond individual and risk group levels to a community level in which Chicago's 77 community areas are examined as subpopulations for the purpose of identifying potential bridging communities. Of particular interest are "hidden" bridging communities; that is, areas with above-average levels of sexual ties with other areas but whose below-average AIDS prevalence may hide their potential importance for HIV prevention. Data for this analysis came from the first wave of recruiting at the Chicago Sexual Acquisition and Transmission of HIV Cooperative Agreement Program site. Between August 2005 through October 2006, respondent-driven sampling was used to recruit users of heroin, cocaine, or methamphetamine, men who have sex with men regardless of drug use, the sex partners of these two groups, and sex partners of the sex partners. In this cross-sectional study of the sexual transmission of HIV, participants completed a network-focused computer-assisted self-administered interview, which included questions about the geographic locations of sexual contacts with up to six recent partners. Bridging scores for each area were determined using a matrix representing Chicago's 77 community areas and were assessed using two measures: non-redundant ties and flow betweenness. Bridging measures and acquired immunodeficiency syndrome (AIDS) case prevalence rates were plotted for each community area on charts representing four conditions: below-average bridging and AIDS prevalence, below-average bridging and above

  10. Digimarc MediaBridge: the birth of a consumer product from concept to commercial application

    Science.gov (United States)

    Perry, Burt; MacIntosh, Brian; Cushman, David

    2002-04-01

    This paper examines the issues encountered in the development and commercial deployment of a system based on digital watermarking technology. The paper provides an overview of the development of digital watermarking technology and the first applications to use the technology. It also looks at how we took the concept of digital watermarking as a communications channel within a digital environment and applied it to the physical print world to produce the Digimarc MediaBridge product. We describe the engineering tradeoffs that were made to balance competing requirements of watermark robustness, image quality, embedding process, detection speed and end user ease of use. Today, the Digimarc MediaBridge product links printed materials to auxiliary information about the content, via the Internet, to provide enhanced informational marketing, promotion, advertising and commerce opportunities.

  11. Nanoparticle bridge DNA biosensor

    Science.gov (United States)

    Huang, Hong-Wen

    A new DNA sensing method is demonstrated in which DNA hybridization events lead to the formation of nanoparticle satellites that bridge two electrodes and are detected electrically. The hybridization events are exclusively carried out only on specific locations, the surfaces of C-ssDNA modified 50 nm GNPs. The uniqueness of this work is that only a small number of T-ccDNA molecules (target DNA and three-base-pair-mismatched DNA in 20nM concentrations. Three single-stranded DNA (ssDNA) system is used in our experiment which includes Capture-ssDNA (C-ssDNA), Target-ssDNA (T-ssDNA) and Probe-ssDNA (P-ssDNA). Both C-ssDNA and P-ssDNA are modified by a thiol group and can hybridize with different portions of T-ssDNA. T-ssDNA requires no modification in three ssDNA system, which is beneficial in many applications. C-ssDNA modified 50nm gold nanoparticle (C-50au) and P-ssDNA modified 30nm gold nanoparticle (P-30au) are prepared through the reaction of thiol-gold chemical bonding between thiolated ssDNA and gold nanoparticle (GNP) (C-ssDNA with 50nm GNP, P-ssDNA with 30nm GNP). We controllably place the C-50au only on the SiO2 band surface (˜ 90nm width) between two gold electrodes (source and drain electrodes) by forming positively- and negatively-charged self-assembled monolayers (SAMs) on SiO2 and gold surface, respectively. DNA modified GNP is negatively charged due to ionization of phosphate group on DNA back bone. C-50au therefore is negatively charged and can only be attracted toward SiO2 area (repelled by negatively charged gold electrode surface). The amine group of positively-charged SAMs on SiO2 surface is then passivated by converting to non-polar methyl functional group after C-50au placement. P-30au is first hybridized with T-ssDNA in the solution phase (T-P- 30au formed) and is introduced into DNA detection device in which C-50au are immobilized on ˜90nm width SiO2 band (between two gold electrodes). The passivation step ensures every TP-30au are attached

  12. Diagnosis of pathologies in bridges of the road system in Brazil

    Directory of Open Access Journals (Sweden)

    Cleovir José MILANI

    2012-07-01

    Full Text Available Infrastructure is an indispensable and decisive requirement for the economic development of a country; it is directly linked to the set of structural economic activities and serves as the foundation for the development of other activities. In this context, the bridges have fundamental importance to the social and economical development of the cities, because the roads are to ensure the entry of inputs on farms, as well as the disposal of products and free movement of populations. The aim of this study is to present a survey of the existing bridges in the south region of Brazil, more specifically in the city of Pato Branco, identifying the most recurrent damages, in order to provide bases to administrators, with the intention of ensuring the correct functioning of the transport infrastructure and in the preservation of public property and security for the users. Data collection was conducted through visits, using the method of visual and photographic records. After the analysis was done, we identified several pathological manifestations, both in concrete and wood bridges, such as moisture stains, cracks, corrosion, erosion, clogging of drains; wood decay, lack of verticality of the pillars and foundation repression, among others. Moreover, there was little or no maintenance on the existing bridges. Similar conditions can be observed in most cities in the south region of the country.

  13. Principles of Bridge Reliability

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle; Nowak, Andrzej S.

    The paper gives a brief introduction to the basic principles of structural reliability theory and its application to bridge engineering. Fundamental concepts like failure probability and reliability index are introduced. Ultimate as well as serviceability limit states for bridges are formulated...

  14. The floating water bridge

    International Nuclear Information System (INIS)

    When high voltage is applied to distilled water filled in two glass beakers which are in contact, a stable water connection forms spontaneously, giving the impression of a floating water bridge. A detailed experimental analysis reveals static and dynamic structures as well as heat and mass transfer through this bridge

  15. Method of intelligent recommendation of Web service resources towards users' balanced requirements%面向用户均衡需求的Web服务资源智能推荐方法

    Institute of Scientific and Technical Information of China (English)

    刘平峰; 张慧; 章佩璐

    2012-01-01

    研究了满足用户在服务功能、服务属性和服务质量上的多层次均衡需求的Web服务资源智能推荐方法,解决了服务信息过载问题.现有服务推荐技术存在未考虑用户对服务多层次均衡需求的不足,结合Web服务资源的特点,综合考虑用户服务需求与候选服务群之间的多层次相似度,设计了综合Web服务资源的功能、属性和质量三个层次的适合度匹配算法,以及用户主观兴趣度匹配算法.通过这两个算法建立了面向用户均衡需求的个性化Web服务资源智能推荐方法,能将最大匹配度的Web服务资源推荐给目标用户.%This paper proposed an approach of intelligent recommendation of Web service resources to users. This approach can satisfy users' balanced multi-level requirements in service function, service attribute and service quality, as well as can solve the problem of service information overload. Present service recommendation techniques do not explore users' balanced multi-level requirements in service. Taking into consideration the characteristics of Web service resources and exploring the multi-level similarity between user's requirements in services and service resource candidates, this paper designed the algorithm of integrated fitness matching in function, attributes and quality of Web service resources, as well as algorithm of matching users' subjective interests. Through the above work, this paper proposed a method of personalized intelligent recommendation of Web service resources oriented towards users' balanced requirements. This method can ensure that the service resource with the maximum matching degree be recommended to the targeted user.

  16. Modelling User-Costs in Life Cycle Cost-Benefit (LCCB) analysis

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle

    2008-01-01

    The importance of including user's costs in Life-Cycle Cost-Benefit analysis of structures is discussed in this paper. This is especially for bridges of great importance. Repair or/and failure of a bridge will usually result in user costs greater than the repair or replacement costs of the bridge....... For the society (and the user's) it is therefore of great importance that maintenance or replacement of a bridge is performed in such a way that all costs are minimized - not only the owners cost....

  17. SMART BRIDGE: A tool for estimating the military load classification of bridges using varying levels of information

    Energy Technology Data Exchange (ETDEWEB)

    Van Groningen, C.N.; Paddock, R.A.

    1997-03-01

    A major consideration in planning and executing military deployments is determining the routes available for moving troops and equipment. Part of this planning ensures that all of the bridges along the routes can support the specialized equipment needed. Because few trained and experienced bridge analysts are available, and automated tool is required to help military engineers and planners quickly and accurately determine the capacity, or the military load classification, of bridges. However, because detailed information about each bridge may not always be available, the tool also needs to include alternative methods for estimating bridge capacities. SMART BRIDGE, developed by Argonne National Laboratory, provides this capacity. The tool consists of a collection of modules that interact with each other to accommodate various bridge types, analytical techniques, and database functions. 5 refs., 6 figs., 2 tabs.

  18. User-centered Service Design for Sustainable Mobility Innovations : Mapping Users’ Needs and Service Requirements for Electric Car Sharing Service Design

    OpenAIRE

    Sopjani, Liridona

    2015-01-01

    Electric car sharing is gradually expanding as an innovative and more sustainable mobility alternative to private cars. Though, the use of such mobility service has not yet reached the desired levels worldwide despite attracting large number of customers. For car sharing operators, thus, it is imperative to understand the users and their needs beyond the existing demographics and quantitative data in order to design more desirable and useful services that expand customer acceptance and usage ...

  19. Characteristics of spent fuel, high-level waste, and other radioactive wastes which may require long-term isolation: Appendix 2B, User's guide to the LWR assemblies data base, Appendix 2C, User's guide to the LWR radiological data base, Appendix 2D, User's guide to the LWR quantities data base

    International Nuclear Information System (INIS)

    This User's Guide for the LWR Assemblies data base system is part of the Characteristics Data Base being developed under the Waste Systems Data Development Program. The objective of the LWR Assemblies data base is to provide access at the personal computer level to information about fuel assemblies used in light-water reactors. The information available is physical descriptions of intact fuel assemblies and radiological descriptions of spent fuel disassembly hardware. The LWR Assemblies data base is a user-oriented menu driven system. Each menu is instructive about its use. Section 5 of this guide provides a sample session with the data base to assist the user

  20. Bridge technology report

    CERN Document Server

    2013-01-01

    Please note this is a Short Discount publication. As LANs have proliferated, new technologies and system concepts have come to the fore. One of the key issues is how to interconnect networks. One means of interconnection is to use a 'bridge'. Other competing technologies are repeaters, routers, and gateways. Bridges permit traffic isolation, connect network segments together and operate at the MAC layer. Further, because they operate at the MAC layer, they can handle a variety of protocols such as TCP/IP, SNA, and X.25. This report focuses on the specific technology of bridging two netw

  1. Bridge Management Systems:present and future

    OpenAIRE

    Thoft-Christensen, Palle

    1997-01-01

    In this paper bridge management systems are discussed with special emphasis on management systems for reinforced concrete bridges. Management systems for prestressed concrete bridges, steel bridges, or composite bridges can be developed in a similar way.

  2. Bridging a cultural gap

    Science.gov (United States)

    Leviatan, Talma

    2008-09-01

    There has been a broad wave of change in tertiary calculus courses in the past decade. However, the much-needed change in tertiary pre-calculus programmes—aimed at bridging the gap between high-school mathematics and tertiary mathematics—is happening at a far slower pace. Following a discussion on the nature of the gap and the objectives of a potential bridging programme, this paper aims at demonstrating that the gap can be bridged, by presenting an ongoing modular bridging programme especially designed for the diverse types of student populations in teachers training colleges. We also present here some innovative teaching and assessment methods that were judged essential for the success of these programmes—focusing mainly on the "Questionnaire Based Instruction Method". Finally we suggest directions of follow up and research.

  3. Bridged Race Population Estimates

    Data.gov (United States)

    U.S. Department of Health & Human Services — Population estimates from "bridging" the 31 race categories used in Census 2000, as specified in the 1997 Office of Management and Budget (OMB) race and ethnicity...

  4. A User requirement2 (UR2) Evaluation of Proliferation Resistance of a 600MWe TRU Burner using ORIGEN2.1

    International Nuclear Information System (INIS)

    Proliferation Resistance (PR) should be assessed during design, operation of innovative nuclear energy system (INS) and management of spent fuel. For developing a TRU burner design an evaluation of PR is necessary to quantitatively evaluate a degree of PR and possibility of misuse and diversion of nuclear material (NM). In this paper, PR is evaluated based on the assessment methodology of the INPRO user manual against a 600MWe class TRU burner. Furthermore, its result is compared with the result of PR assessment of PWR and CANDU. The attractiveness of nuclear material is also assessed by using the ORIGEN2.1 code

  5. CRACUK user's guide

    International Nuclear Information System (INIS)

    The CRACUK computer code is a revised version of the US consequence modelling code CRAC2, adapted to suit UK applications. Modifications to various models within the code have led to certain changes in the input data requirements for CRACUK in comparison with CRAC2. This guide, written in the form of an Appendix to the CRAC2 User Guide, includes descriptions of the input data layout as it has been altered for use in CRACUK. Used in conjunction with the CRAC2 User Guide, this publication should allow easy use of the CRACUK code. (author)

  6. TRANS-USERS

    DEFF Research Database (Denmark)

    This report addresses user-orientated strategies for industrialising the construction industry. In the first part, the objectives of the study are described along with the theoretical framework and the research design of the study. The second part of this report contains five case studies conducted...... to redesign production and business processes to accommodate for users' requirements (Maisons MACCHI), and the client as driver of innovation on the construction and renovation of the low budget hotel brand Formule 1 of ACCOR Hotels. In the third part, the discussion and conclusion addresses three...

  7. Integral Abutment and Jointless Bridges

    OpenAIRE

    Cristian-Claudiu Comisu

    2005-01-01

    Integral bridges, or integral abutment and jointless bridges, as they are more commonly known in the USA, are constructed without any movement joints between spans or between spans and abutments. Typically these bridges have stub-type abutments supported on piles and continuous bridge deck from one embankment to the other. Foundations are usually designed to be small and flexible to facilitate horizontal movement or rocking of the support. Integrally bridges are simple or multiple span ones t...

  8. Development of a nondestructive evaluation method for FRP bridge decks

    Science.gov (United States)

    Brown, Jeff; Fox, Terra

    2010-05-01

    Open steel grids are typically used on bridges to minimize the weight of the bridge deck and wearing surface. These grids, however, require frequent maintenance and exhibit other durability concerns related to fatigue cracking and corrosion. Bridge decks constructed from composite materials, such as a Fiber-reinforced Polymer (FRP), are strong and lightweight; they also offer improved rideability, reduced noise levels, less maintenance, and are relatively easy to install compared to steel grids. This research is aimed at developing an inspection protocol for FRP bridge decks using Infrared thermography. The finite element method was used to simulate the heat transfer process and determine optimal heating and data acquisition parameters that will be used to inspect FRP bridge decks in the field. It was demonstrated that thermal imaging could successfully identify features of the FRP bridge deck to depths of 1.7 cm using a phase analysis process.

  9. Metadata: A user`s view

    Energy Technology Data Exchange (ETDEWEB)

    Bretherton, F.P. [Univ. of Wisconsin, Madison, WI (United States); Singley, P.T. [Oak Ridge National Lab., TN (United States)

    1994-12-31

    An analysis is presented of the uses of metadata from four aspects of database operations: (1) search, query, retrieval, (2) ingest, quality control, processing, (3) application to application transfer; (4) storage, archive. Typical degrees of database functionality ranging from simple file retrieval to interdisciplinary global query with metadatabase-user dialog and involving many distributed autonomous databases, are ranked in approximate order of increasing sophistication of the required knowledge representation. An architecture is outlined for implementing such functionality in many different disciplinary domains utilizing a variety of off the shelf database management subsystems and processor software, each specialized to a different abstract data model.

  10. Exploring how lead users develop radical innovation

    DEFF Research Database (Denmark)

    Lettl, Christopher; Gemuenden, Hans Georg; Hienerth, C.

    2008-01-01

    In this study, we explore how lead users develop radical innovations outside of manufacturing firms. We analyze the transition from a very early stage of activities to the ultimate commercialization of these innovations. The focus in this context is on the initiatives undertaken by lead users in...... lead users as surgeons launch entrepreneurial activities and bridge periods in which established medical equipment manufacturers would not risk investing in radical innovations. By doing so, lead users create the conditions usually provided in manufacturer-initiated lead user projects, including the...... supply of diversified knowledge, the development and coordination of a network for further development of the innovation, and initial tests of technical or market feasibility. Our findings have implications for manufacturing firms that wish to design radical innovation projects with (individual) lead...

  11. Istanbul Bridge Conference 2014

    CERN Document Server

    Gülkan, Polat; Mahmoud, Khaled

    2016-01-01

      The book includes peer-reviewed contributions selected from presentations given at the Istanbul Bridge Conference 2014, held from August 11 – 13 in Istanbul, Turkey. It reports on the current challenges in bridge engineering faced by professionals around the globe, giving a special emphasis to recently developed techniques, innovations and opportunities. The book covers key topics in the field, including modeling and analysis methods; construction and erection techniques; design for extreme events and condition assessment and structural health monitoring. There is a balanced presentation of theory, research and practice. This book, which provides the readers with a comprehensive and timely reference guide on current practices in bridge engineering, is intended for professionals, academic researchers and students alike.

  12. Active Control of Suspension Bridges

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle

    In this paper some recent research on active control of very long suspension bridges, is presented. The presentation is based on research work at Aalborg University, Denmark. The active control system is based on movable flaps attached to the bridge girder. Wind load on bridges with or without...... flaps attached to the girder is briefly presented. A simple active control system is discussed. Results from wind tunnel experiments with a bridge section show that flaps can be used effectively to control bridge girder vibrations. Flutter conditions for suspension bridges with and without flaps are...

  13. RECONSTRUCTION AND REINFORCEMENT OF BRIDGE ACROSS THE RIVER. SYLVA IN KUNGUR, RUSSIA

    Directory of Open Access Journals (Sweden)

    R. Ye. Heizn

    2010-04-01

    Full Text Available Sylva Bridge at Kungur city is one of the oldest road bridges in Perm region, the West Urals, Russia. Its erection was begun in 1912 and was interrupted with the First World War and the further events in Russia. The bridge was opened only in 1931. For 75 years of bridge operation the most part of bridge constructions has been acquired plural damages, both mechanical and corrosion. After the bridge inspection in 2003 and according to the calculations of its capacity, the decision on reconstruction of the bridge was accepted. The purpose of rehabilitation was to replace the timber deck by steel orthotropic deck with asphalt pavement. A new deck was to be engaged in combined action with the existing metal structures with the help of socles with high-strength bolts. Due to this, the bridge carrying capacity was increased as required by the present standards. In 2006, after tests, the bridge was opened for traffic.

  14. Bridge Areas - USACE IENC

    Data.gov (United States)

    Department of Homeland Security — These inland electronic Navigational charts (IENCs) were developed from available data used in maintenance of Navigation channels. Users of these IENCs should be...

  15. Investigation of Aerodynamic Interference of Double Deck Bridges

    Energy Technology Data Exchange (ETDEWEB)

    Sitek, M. A. [Argonne National Lab. (ANL), Argonne, IL (United States). Energy Systems Division. Transportation Research and Analysis Computing Center (TRACC); Bojanowski, C. [Argonne National Lab. (ANL), Argonne, IL (United States). Energy Systems Division. Transportation Research and Analysis Computing Center (TRACC); Lottes, S. A. [Argonne National Lab. (ANL), Argonne, IL (United States). Energy Systems Division. Transportation Research and Analysis Computing Center (TRACC)

    2016-05-01

    Construction of a twin bridge can be a cost effective and minimally disruptive way to increase capacity when an existing bridge is not near the end of its service life. With ever growing vehicular traffic, when demand approaches the capacity of many existing roads and bridges. Remodeling a structure with an insufficient number of lanes can be a good solution in case of smaller and less busy bridges. Closing down or reducing traffic on crossings of greater importance for the construction period, however, can result in major delays and revenue loss for commerce and transportation as well as increasing the traffic load on alternate route bridges. Multiple-deck bridges may be the answer to this issue. A parallel deck can be built next to the existing one, without reducing the flow. Additionally, a new bridge can be designed as a twin or multi-deck structure. Several such structures have been built throughout the United States, among them: - The New NY Bridge Project - the Tappan Zee Hudson River Crossing, - SR-182 Columbia River Bridge, - The Thaddeus Kosciusko Bridge (I-87), - The Allegheny River Bridge, Pennsylvania, which carries I76, - Fred Hartman Bridge, TX, see Figure 1.2. With a growing number of double deck bridges, additional, more detailed, studies on the interaction of such bridge pairs in windy conditions appears appropriate. Aerodynamic interference effects should be examined to assure the aerodynamic stability of both bridges. There are many studies on aerodynamic response of single deck bridges, but the literature on double-deck structures is not extensive. The experimental results from wind tunnels are still limited in number, as a parametric study is required, they can be very time consuming. Literature review shows that some investigation of the effects of gap-width and angle of wind incidence has been done. Most of the CFD computational studies that have been done were limited to 2D simulations. Therefore, it is desirable to investigate twin decks

  16. Salinas - User's Notes; TOPICAL

    International Nuclear Information System (INIS)

    Salinas provides a massively parallel implementation of structural dynamics finite element analysis, required for high fidelity, validated models used in modal, vibration, static and shock analysis of weapons systems. This document provides a users guide to the input for Salinas. Details of input specifications for the different solution types, output options, element types and parameters are included. The appendices contain detailed examples, and instructions for running the software on parallel platforms

  17. 23 CFR 972.210 - Federal lands bridge management system (BMS).

    Science.gov (United States)

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Federal lands bridge management system (BMS). 972.210....210 Federal lands bridge management system (BMS). In addition to the requirements provided in § 972... CFR 650, subpart C, National Bridge Inspection Standards (NBIS). (b) The BMS shall be designed to...

  18. 23 CFR 970.210 - Federal lands bridge management system (BMS).

    Science.gov (United States)

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Federal lands bridge management system (BMS). 970.210... Federal lands bridge management system (BMS). In addition to the requirements provided in § 970.204, the... National Bridge Inspection Standards (23 CFR part 650, subpart C); (ii) Data characterizing the...

  19. Assistive Technology: Bridging End-users and Technology%Assistive Technology:Bridging End-users and Technology

    Institute of Scientific and Technical Information of China (English)

    Renzo Andrich; Serenella Besio

    2011-01-01

    One of the basic aspects that determines the success or failure in the use of assistive technologies on the part of people with disabilities is constituted by the ability that provide a disabled person with the technology that corresponds effectively to his needs and to his capabilities,thus to interpret correctly the problems and to find the right ways of transferring this technological "knowledge".If the aids answer the effective needs and capabilities of the person he can achieve significant improvement to reach the goals of his individual rehabilitative project.The article highlights the key factors of success.

  20. Building Migratory Bridges

    Science.gov (United States)

    Roy, Michael; Doss, Laurie K.

    2007-01-01

    The Building Migratory Bridges (BOMB) program--a collaboration between the Marvel wood School and Audubon Sharon in Connecticut and Conservation Research Education Action (CR EA), a U.S. not-for-profit in Panama--uses nontropical migratory bird research in the United States and Panama to demonstrate how negative environmental impacts in one…

  1. Quantum Bidding in Bridge

    Science.gov (United States)

    Muhammad, Sadiq; Tavakoli, Armin; Kurant, Maciej; Pawłowski, Marcin; Żukowski, Marek; Bourennane, Mohamed

    2014-04-01

    Quantum methods allow us to reduce communication complexity of some computational tasks, with several separated partners, beyond classical constraints. Nevertheless, experimental demonstrations of this have thus far been limited to some abstract problems, far away from real-life tasks. We show here, and demonstrate experimentally, that the power of reduction of communication complexity can be harnessed to gain an advantage in a famous, immensely popular, card game—bridge. The essence of a winning strategy in bridge is efficient communication between the partners. The rules of the game allow only a specific form of communication, of very low complexity (effectively, one has strong limitations on the number of exchanged bits). Surprisingly, our quantum technique does not violate the existing rules of the game (as there is no increase in information flow). We show that our quantum bridge auction corresponds to a biased nonlocal Clauser-Horne-Shimony-Holt game, which is equivalent to a 2→1 quantum random access code. Thus, our experiment is also a realization of such protocols. However, this correspondence is not complete, which enables the bridge players to have efficient strategies regardless of the quality of their detectors.

  2. Bridge of Light

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Lying gleaming white under a brooding sky,the Lhasa River Railway Bridge forms a gate to Lhasa City.Built as a part of Qinghai-Tibet Railway,on July 1,2011, the highest altitude railway in the world has been in service for five years. Lhasa,Tibet

  3. Bridge over troubled water?

    DEFF Research Database (Denmark)

    Svendsen, Gunnar Lind Haase; Nannestad, Peter; Svendsen, Gert Tinggaard

    2008-01-01

    The problem of integrating non-Western immigrants into Western welfare states is the focus of this paper. To address this issue, we suggest a social capital approach in which we apply the conceptual pair of bridging social capital (BR), which connects an individual to the broader social structure...

  4. Justine user`s manual

    Energy Technology Data Exchange (ETDEWEB)

    Lee, S.R.

    1995-10-01

    Justine is the graphical user interface to the Los Alamos Radiation Modeling Interactive Environment (LARAMIE). It provides LARAMIE customers with a powerful, robust, easy-to-use, WYSIWYG interface that facilitates geometry construction and problem specification. It is assumed that the reader is familiar with LARAMIE, and the transport codes available, i.e., MCNPTM and DANTSYSTM. No attempt is made in this manual to describe these codes in detail. Information about LARAMIE, DANTSYS, and MCNP are available elsewhere. It i also assumed that the reader is familiar with the Unix operating system and with Motif widgets and their look and feel. However, a brief description of Motif and how one interacts with it can be found in Appendix A.

  5. 支持QoS和用户需求的Web服务选择模糊算法%Web service selection fuzzy algorithm for QoS and user's requirements

    Institute of Scientific and Technical Information of China (English)

    施荣荣; 周晓明; 郭成昊

    2011-01-01

    基于QoS的Web服务选择能为用户提供更好的服务质量,而基于用户对QoS的需求和偏好的模糊性来进行Web服务选择是其中的一种方法.针对如何通过这种方法合理地获得最优候选服务集,是Web服务架构待解决的一个问题,提出了一种支持QoS和用户需求的Web服务选择模糊算法.该算法将用户对QoS的需求及偏好的语言描述进行去模糊化,然后选择出最符合用户需求的服务集.通过对模拟的服务质量数据进行实验,验证了该算法的优越性和有效性.%QoS-based Web service selection can provide better service quality.There was one method to select Web service which utilized fuzziness of user' s needs and preferences for QoS.It was an urgent problem to obtain most excellent candidate service set reasonably.This paper proposed a Web service selection fuzzy algorithm for QoS and user' s requirements.This algorithm defuzzified user' s language description of the needs and requirements for QoS.Besides, it selected the most reasonable service set.This paper studied simulative service quality data and verified the advantage and availability of this algorithm.

  6. Cracking behavior of structural slab bridge decks

    Science.gov (United States)

    Baah, Prince

    Bridge deck cracking is a common problem throughout the United States, and it affects the durability and service life of concrete bridges. Several departments of transportation (DOTs) in the United States prefer using continuous three-span solid structural slab bridges without stringers over typical four-lane highways. Recent inspections of such bridges in Ohio revealed cracks as wide as 0.125 in. These measured crack widths are more than ten times the maximum limit recommended in ACI 224R-01 for bridge decks exposed to de-icing salts. Measurements using digital image correlation revealed that the cracks widened under truck loading, and in some cases, the cracks did not fully close after unloading. This dissertation includes details of an experimental investigation of the cracking behavior of structural concrete. Prism tests revealed that the concrete with epoxy-coated bars (ECB) develops the first crack at smaller loads, and develops larger crack widths compared to the corresponding specimens with uncoated (black) bars. Slab tests revealed that the slabs with longitudinal ECB developed first crack at smaller loads, exhibited wider cracks and a larger number of cracks, and failed at smaller ultimate loads compared to the corresponding test slabs with black bars. To develop a preventive measure, slabs with basalt and polypropylene fiber reinforced concrete were also included in the test program. These test slabs exhibited higher cracking loads, smaller crack widths, and higher ultimate loads at failure compared to the corresponding slab specimens without fibers. Merely satisfying the reinforcement spacing requirements given in AASHTO or ACI 318-11 is not adequate to limit cracking below the ACI 224R-01 recommended maximum limit, even though all the relevant design requirements are otherwise met. Addition of fiber to concrete without changing any steel reinforcing details is expected to reduce the severity and extent of cracking in reinforced concrete bridge decks.

  7. A Mobile/Web App for Long Distance Caregivers of Older Adults: Functional Requirements and Design Implications from a User Centered Design Process

    OpenAIRE

    Williamson, Steven S.; Gorman, Paul N.; Jimison, Holly B.

    2014-01-01

    Recent trends of population aging and globalization have required an increasing number of individuals to act as long distance caregivers (LDCs) to aging family members. Information technology solutions may ease the burden placed on LDCs by providing remote monitoring, easier access to information and enhanced communication. While some technology tools have been introduced, the information and technology needs of LDCs in particular are not well understood. Consequently, a needs assessment was ...

  8. Satisfacción del usuario que requiere exámenes de laboratorio urgentes, Costa Rica User satisfaction requires urgent laboratory tests, Costa Rica

    Directory of Open Access Journals (Sweden)

    Helen Moraga Moraga

    2011-06-01

    Full Text Available Antecedentes: A través de un nuevo concepto holístico de calidad se han venido realizando algunos estudios de satisfacción de los usuarios de servicios de salud en el área metropolitana del país. Sin embargo en la Región Huetar Atlántica, no se había realizado ninguna publicación de esta clase de estudios. Objetivo: Analizar la satisfacción del usuario del laboratorio clínico del Área de Salud de Cariari que se realiza exámenes urgentes bajo las dimensiones de capacidad de respuesta, accesibilidad, cortesía, confort, comunicación y profesionalismo. Materiales y Método: Estudio cuantitativo, de concepción positivista, basada en entrevistas aplicadas a los pacientes en una muestra de 344 pacientes, todos usuarios del laboratorio clínico del Área de Salud de Cariari. Resultados: Destaca la insatisfacción en el tiempo de respuesta del laboratorio clínico, especialmente la espera de los pacientes para recibir el resultado. Discusión: Con el fin de mejorar la satisfacción de los pacientes se debe reforzar el recurso humano, automatizar pruebas y adquirir equipos de mayor capacidad de procesamientoBackground: Based on a new holistic quality concept, some patients’ satisfaction studies have been carried out in the Central Valley of our country. However, in the Huetar Atlantic Region, such studies have never been published. Objective: Analyze the satisfaction of patients who undertake urgent laboratory tests at Cariari Health Area through the implementation of a research performed under the dimensions of responsiveness, accessibility, courtesy, comfort, communication and professionalism. Materials and Methods: Aquantitative,positivistconception, based on interviews applied to patients in a sample of 344 patients, all users of a clinical laboratory of the Cariari Health Area. Results: Highlights the dissatisfaction with the response time of the clinical laboratory, especially the waiting time for patients to receive the result

  9. Data latency and the user community

    Science.gov (United States)

    Escobar, V. M.; Brown, M. E.; Carroll, M.

    2013-12-01

    The community using NASA Earth science observations in applications has grown significantly, with increasing sophistication to serve national interests. The National Research Council's Earth Science Decadal Survey report stated that the planning for applied and operational considerations in the missions should accompany the acquisition of new knowledge about Earth (NRC, 2007). This directive has made product applications at NASA an integral part of converting the data collected into actionable knowledge that can be used to inform policy. However, successfully bridging scientific research with operational decision making in different application areas requires looking into user data requirements and operational needs. This study was conducted to determine how users are incorporating NASA data into applications and operational processes. The approach included a review of published materials, direct interviews with mission representatives, and an online professional review, which was distributed to over 6000 individuals. We provide a complete description of the findings with definitions and explanations of what goes into measuring latency as well as how users and applications utilize NASA data products. We identified 3 classes of users: operational (need data in 3 hours or less), near real time (need data within a day of acquisition), and scientific users (need highest quality data, time independent). We also determined that most users with applications are interested in specific types of products that may come from multiple missions. These users will take the observations when they are available, however the observations may have additional applications value if they are available either by a certain time of day or within a period of time after acquisition. NASA has supported the need for access to low latency data on an ad-hoc basis and more substantively in stand-alone systems such as the MODIS Rapid Response system and more recently with LANCE. The increased level

  10. Effect of material uncertainties on dynamic response of segmental box girder bridge

    OpenAIRE

    Suchart Limkatanyu; Kittisak Kuntiyawichai

    2007-01-01

    The main objective of this paper was to investigate the effect of material uncertainties on dynamic response of segmental box girder bridge subjected to a moving load, in this case a rapid passing trains. Literatures concerned with the design of segmental box girder bridge, the application of finite element analysis to model the segmental box girder bridge, and the minimum requirement for structural conditions of the bridge were described and discussed in detail. A series of finite element a...

  11. Revised Rules for Concrete Bridges

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle; Jensen, F. M.; Middleton, C.; Blackmore, A.

    This paper is based on research performed for the Highway Agency, London, UK under the project DPU/9/44 "Revision of Bridge Assessment Rules Based on Whole Life Performance: Concrete Bridges" It contains details of a methodology which can be used to generate Whole Life (WL) reliability profiles....... These WL reliability profiles may be used to establish revised rules for Concrete Bridges....

  12. ASSERT-4 user's manual

    International Nuclear Information System (INIS)

    ASSERT-4 is an advanced subchannel code being developed primarily to model single- and two-phase flow and heat transfer in horizontal rod bundles. This manual is intended to facilitate the application of this code to the analysis of flow in reactor fuel channels. It contains a brief description of the thermalhydraulic model and ASSERT-4 solution scheme, and other information required by users. This other information includes a detailed discussion of input data requirements, a sample problem and solution, and information describing how to access and run ASSERT-4 on the Chalk River computers

  13. Early markets for hydrogen vehicles. Bridging the gap between R and D and commercialisation

    International Nuclear Information System (INIS)

    Early markets for hydrogen vehicles are important to bridge the gap between the phase of R and D and mass-market introduction. New technologies do not necessarily need to comply with the high demanding preference of mass-market users from the start, though they can be first deployed in protected markets where their relative advantage can be utilised most efficiently. Within the EU funded HyLights project the potential of early markets for hydrogen vehicles are assessed by mapping potential users of early market applications and by defining their minimal performance level. To compare this minimal performance level with the current performance level of hydrogen technologies, conclusions can be drawn about potential early markets. As hydrogen technologies will develop in time the type of early markets could change in time as well: early markets will evolve gradually towards mass-market application. In order to describe both the requirements of the potential early market users and the performance of the technology analogously, key performance indicators are defined. These indicators describe those aspects of the technology that are of importance for the end user

  14. An Authentication Framework for Nomadic Users

    DEFF Research Database (Denmark)

    Ahmed, Naveed; Jensen, Christian D.

    . This is probably best explained by considering password based authentication, where a user is actively involved in the process. If the time required to log in to an account is considered too high, users tend to leave their terminals logged in throughout the day and share their account with other users...... defeating the obstacle by leaving terminals logged in or choosing short and easy to type passwords. Therefore, a password based authentication mechanism, which is quite simple and secure in personal computing, has become too cumbersome for nomadic users, which means that other means of authentication must...... be developed for nomadic users. In this paper, we focus on usability of authentication for nomadic users in a ubiquitous computing environment. We identify requirements for authentication of nomadic users and propose an authentication framework for this class of users. A prototype of the proposed...

  15. [Retention of adhesive bridges].

    Science.gov (United States)

    Raes, F; De Boever, J

    1994-04-01

    Since the development of adhesive bridges in the early seventies, the retention and therefore the durability of these bridges has been tremendously improved. Conditioning of the non-precious metal by silanisation, careful acid etching of the enamel and the use of the appropriate composite resin are of prime importance. Furthermore, the meticulous preparation with enough interproximal embrace, occlusal rests, interocclusal clearance and cingulum stops is equally important. Including more teeth in the design does not necessarily lead to an improved retention. Besides the material and technical aspects, the whole clinical procedure needs much attention. The retention does not depend on one single factor, but on the precision of all the necessary clinical steps and on a well-defined selection of the material. In this way a five-year survival rate of close to 80% can be obtained. PMID:11830965

  16. TEBASCO user's guide

    International Nuclear Information System (INIS)

    TEBASCO is a Tandem mirror Equilibrium and BAllooning Stability COde. TEBASCO allows you to compute tandem-mirror MHD equilibria and to analyze both the flute-averaged and ballooning-mode stability of these equilibria. This stability analysis is directed toward the computation of marginal stability boundaries. Users of TEBASCO require a binary output file from the EFFI code which describes the vacuum magnetic field. In making this EFFI file the user will have defined a system of units for lengths (e.g., meters) and magnetic field (e.g., Tesla). In TEBASCO, all magnetic field strengths are normalized to the vacuum center-cell midplane value, and times are defined in units of the time for an Alfven wave in this field to transit one EFFI unit of length

  17. Nasal Bridge Intramuscular Hemangioma

    OpenAIRE

    Zulkifli Hamir Basah; Irfan Mohamad; Ramiza Ramza Ramli; Maha Khadum Gayadh; Samarendra Singh Mutum

    2015-01-01

    Intramuscular haemangioma (IMH) is a benign mesenchymal tumour. It appears as a deep, nontender mass within the soft tissue, particularly in the extremities. This tumour may not be obvious on clinical examination. Head and neck IMHs represent only 13.5% of the total IMHs. The most common site for a head and neck IMH is the masseter muscle, followed by trapezius, sternocleidomastoid, and very rarely temporalis muscle. We present a patient with left nasal bridge swelling which was excised and h...

  18. BRIDGING SERVICE QUALITY GAPS

    OpenAIRE

    BARKATH UNISSA

    2012-01-01

    Bridging the Service quality gaps is one of the foremost areas of concern for amarketer. Service marketing is inherently different from product or goods marketing.Services are distinctively characterized by their intangible, heterogeneous, inseparableand perishable nature. The importance of the service sector in today's world is a verywidely accepted and renowned idea. “We are already experiencing a service society“services do have some basic characteristics which make them fundamentally diff...

  19. Bridging as Coercive Accommodation

    CERN Document Server

    Bos, J W; Mineur, A M; Bos, Johan; Buitelaar, Paul; Mineur, Anne-Marie

    1995-01-01

    In this paper we discuss the notion of "bridging" in Discourse Representation Theory as a tool to account for discourse referents that have only been established implicitly, through the lexical semantics of other referents. In doing so, we use ideas from Generative Lexicon theory, to introduce antecedents for anaphoric expressions that cannot be "linked" to a proper antecedent, but that do not need to be "accommodated" because they have some connection to the network of discourse referents that is already established.

  20. Nematic liquid crystal bridges

    Science.gov (United States)

    Doss, Susannah; Ellis, Perry; Vallamkondu, Jayalakshmi; Danemiller, Edward; Vernon, Mark; Fernandez-Nieves, Alberto

    We study the effects of confining a nematic liquid crystal between two parallel glass plates with homeotropic boundary conditions for the director at all bounding surfaces. We find that the free surface of the nematic bridge is a surface of constant mean curvature. In addition, by changing the distance between the plates and the contact angle with the glass plates, we transition between loops and hedgehogs that can be either radial or hyperbolic.

  1. A mobile/web app for long distance caregivers of older adults: functional requirements and design implications from a user centered design process.

    Science.gov (United States)

    Williamson, Steven S; Gorman, Paul N; Jimison, Holly B

    2014-01-01

    Recent trends of population aging and globalization have required an increasing number of individuals to act as long distance caregivers (LDCs) to aging family members. Information technology solutions may ease the burden placed on LDCs by providing remote monitoring, easier access to information and enhanced communication. While some technology tools have been introduced, the information and technology needs of LDCs in particular are not well understood. Consequently, a needs assessment was performed by using video conferencing software to conduct semi-structured interviews with 10 LDCs. Interviews were enriched through the use of stimulus materials that included the demonstration of a prototype LDC health management web/mobile app. Responses were recorded, transcribed and then analyzed. Subjects indicated that information regarding medication regimens and adherence, calendaring, and cognitive health were most needed. Participants also described needs for video calling, activity data regarding sleep and physical exercise, asynchronous communication, photo sharing, journaling, access to online health resources, real-time monitoring, an overall summary of health, and feedback/suggestions to help them improve as caregivers. In addition, all respondents estimated their usage of a LDC health management website would be at least once per week, with half indicating a desire to access the website from a smartphone. These findings are being used to inform the design of a LDC health management website to promote the meaningful involvement of distant family members in the care of older adults. PMID:25954469

  2. User interface design and evaluation

    CERN Document Server

    Stone, Debbie; Woodroffe, Mark

    2005-01-01

    Whether you are a professional new to the user-centered design field, or an experienced designer who needs to learn the fundamentals of user interface design and evaluation, this book can lead the way.What will you get from this book? Based on a course from the Open University, UK which has been taught to over a thousand professionals and students, this book presents an overview of the field. It illustrates the benefits of a user-centered approach to the design of software, computer systems, and web sites, and provides a clear and practical discussion of requirements gathering; develop

  3. 公路桥涵汽车用电子限高报警系统(Ⅰ)——电子限高报警装置的原理与基本要求%Electronic Height Limit Alarm System of Highway Bridge Culvert Automobile(Ⅰ)——principle and essential requirements of electronic height limit alarm device

    Institute of Scientific and Technical Information of China (English)

    刘长生

    2011-01-01

    公路桥涵车用电子限高报警装置,是一种防止超高车辆撞坏桥涵的自动检测报警装置。文中描述这种专用电子限高装置的工作原理、基本要求以及常用的激光检测器与红外检测器的性能,为下一步进行设计公路桥涵车用电子限高报警装置提供必要的理论依据。%Electronic height limit alarm device of highway bridge culvert vehicle is an automatic detection and alarm device that prevents bridge and culver being destroyed by high vehicles.The working principles and essential requirements of the special device together with the performance of laser and infrared detectors commonly used were described in this paper,which could provide necessary theoretical basis for the design of electronic height limit alarm device applied in highway bridge culvert vehicles.

  4. Eye Movements Durin g Processing of Discourse Requiring Bridging Inferences in Deaf Readers with Skilled and Less Skilled%不同阅读能力聋人语篇理解中连接推理的眼动比较

    Institute of Scientific and Technical Information of China (English)

    贺荟中; 孙彬彬

    2014-01-01

    In this study, two questions regarding deaf adolescents with skilled and less skilled processing of bridging in-ference are investigated.12 deaf readers with skilled and 10 deaf readers with less skilled read short, two-sentence passages that was either a causal sequence or a control temporal sequence, and respond to two questions,one is posited to refer to the relevant knowledge used to evaluate the mediating fact and the other is about explicit informa -tion of the discourse.We measured correct responses and answer times to questions , as well as recorded the eye-movements of the participants while reading .Analysis of the skilled participants ’answer times to questions were consistently faster in the causal condition than the control condition , indicating skilled adolescents with deaf con-struct bridging inference online.We can’ t find the validation effect in less skilled adolescents with deaf, indicating they don’ t construct bridging inference online.However, the eye-movements data revealed that the less skilled readers with deaf spent more time fixating, made more fixations, and made total times in the causal sentences while reading than did skilled readers with deaf .One explanation is that they make the inferences, but are unable to re-tain them offline or they make the inferences but are unable to incorporate them into meaning formed from text and prior knowledge activated during the reading process.The study also suggests that skilled deaf readers draw bridg-ing inference automatically and efficiently, less skilled deaf reader are less efficient and are not up to the degree of automation at drawing bridging inference.Implication of these finding and suggestions for future research are of-fered.%采用记录被试阅读完成后回答问题的正确率、反应时与眼动指标,试图探讨不同阅读能力聋人语篇理解中连接推理的加工特点与效率。结果表明:在语篇局部连贯中断情况下,高低阅读能力聋人

  5. Characterization and electrical modeling of semiconductors bridges

    Energy Technology Data Exchange (ETDEWEB)

    Marx, K.D. [Sandia National Labs., Livermore, CA (United States); Bickes, R.W. Jr.; Wackerbarth, D.E. [Sandia National Labs., Albuquerque, NM (United States)

    1997-03-01

    Semiconductor bridges (SCBs) are finding increased use as initiators for explosive and pyrotechnic devices. They offer advantages in reduced voltage and energy requirements, coupled with excellent safety features. The design of explosive systems which implement either SCBs or metal bridgewires can be facilitated through the use of electrical simulation software such as the PSpice{reg_sign} computer code. A key component in the electrical simulation of such systems is an electrical model of the bridge. This report has two objectives: (1) to present and characterize electrical data taken in tests of detonators which employ SCBs with BNCP as the explosive powder; and (2) to derive appropriate electrical models for such detonators. The basis of such models is a description of the resistance as a function of energy deposited in the SCB. However, two important features which must be added to this are (1) the inclusion of energy loss through such mechanisms as ohmic heating of the aluminum lands and heat transfer from the bridge to the surrounding media; and (2) accounting for energy deposited in the SCB through heat transfer to the bridge from the explosive powder after the powder ignites. The modeling procedure is entirely empirical; i.e., models for the SCB resistance and the energy gain and loss have been estimated from experimental data taken over a range of firing conditions. We present results obtained by applying the model to the simulation of SCB operation in representative tests.

  6. User and technical documentation

    Science.gov (United States)

    1988-01-01

    The program LP1 calculates outbound and return trajectories between low earth orbit (LEO) and libration point no. 1 (L1). Libration points (LP) are defined as locations in space that orbit the Earth such that they are always stationary with respect to the Earth-Moon line. L1 is located behind the Moon such that the pull of the Earth and Moon together just cancel the centrifugal acceleration associated with the libration point's orbit. The input required from the user to define the flight is described. The contents of the six reports produced as outputs are presented. Also included are the instructions needed to execute the program.

  7. User interface concerns

    Science.gov (United States)

    Redhed, D. D.

    1978-01-01

    Three possible goals for the Numerical Aerodynamic Simulation Facility (NASF) are: (1) a computational fluid dynamics (as opposed to aerodynamics) algorithm development tool; (2) a specialized research laboratory facility for nearly intractable aerodynamics problems that industry encounters; and (3) a facility for industry to use in its normal aerodynamics design work that requires high computing rates. The central system issue for industry use of such a computer is the quality of the user interface as implemented in some kind of a front end to the vector processor.

  8. XTV users guide

    International Nuclear Information System (INIS)

    XTV is an X-Windows based Graphical User Interface for viewing results of Transient Reactor Analysis Code (TRAC) calculations. It provides static and animated color mapped visualizations of both thermal-hydraulic and heat conduction components in a TRAC model of a nuclear power plant, as well as both on-screen and hard copy two-dimensional plot capabilities. XTV is the successor to TRAP, the former TRAC postprocessor using the proprietary DISSPLA graphics library. This manual describes Version 2.0, which requires TRAC version 5.4.20 or later for full visualization capabilities

  9. User-Driven CHAOS

    DEFF Research Database (Denmark)

    Lykke, Marianne; Lund, Haakon; Skov, Mette

    2016-01-01

    optimally sup-port the researchers a user-centred approach was taken to develop the platform and related metadata scheme. Based on the requirements a three level metadata scheme was developed: (1) core archival metadata, (2) LARM metadata, and (3) project-specific metadata. The paper analyses how...... researchers apply the metadata scheme in their research work. The study consists of two studies, a) a qualitative study of subjects and vo-cabulary of the applied metadata and annotations, and 5 semi-structured interviews about goals for tagging. The findings clearly show that the primary role of LARM.fm is...

  10. Vulnerability of bridges to fire

    DEFF Research Database (Denmark)

    Giuliani, Luisa; Crosti, C.; Gentili, F.

    2012-01-01

    Even if recent effort in developing methodology and measures for design structures against fire and explosions has been mostly focused on buildings, bridges can also be very sensitive to those actions, as witnesses by some recent bridge accidents, which caused major economic losses and also...... endangered people safety in few cases. Purpose of this paper is making a focus on the state of the art of the research and current regulations concerning the response of bridges to fire. Several cases of bridge fires are reported and a focus is made on the occurrence and consequence of bridge fires......, considering both the costs deriving by structural damages and by limited serviceability and other indirect societal aspects. Few cases of recent bridge fire are reviewed in detail and structural consequences are highlighted, distinguishing between damages directly induced by fire and damages induced by local...

  11. Adaptive media content architecture regarding users capabilities

    OpenAIRE

    Cuenca Gil, David

    2009-01-01

    Nowadays, it's common that each user has different capabilities and each media content has different requirements. So, in this project will be studied and implement a first approach how to adapt media content stored in repositories to users capabilities. Different kinds of video content will be studied, and how their requirements can be changed with a good subjective quality for the user. Depending on the kind of content, different types of changes could be done in order to decrease the video...

  12. Study of remaining fatigue life of Brazilian concrete bridges

    OpenAIRE

    Rodrigues, J. Fernando; Almeida, Pedro A.O.; Casas Rius, Joan Ramon

    2010-01-01

    Brazilian roadway bridges had their dynamics effects measured under a structural identification program. Data collected from the tests show that dynamic effects due to traffic can be higher than that produced by a 450 kN lorry, specified in the Standard for design of concrete bridges in Brazil. This fact can affect the fatigue performance of bridge structures in face of 100 years-life required on most current codes. So in this paper a parametric study on the fatigue life time of short-span...

  13. Bridge Inspections and Being an ERC

    OpenAIRE

    Hoernschemeyer, Keith; Miller, Jessica

    2015-01-01

    This presentation will discuss recent changes to the County Bridge Inspection Program from the perspective of both the FHWA and INDOT. We will also discuss the responsibilities of the local public agency’s (LPA’s) employee in responsible charge (ERC) with respect to managing this program. As this course is a yearly requirement, all county ERCs are encouraged to attend. Pre-registering is strongly encouraged by e-mailing your contact information to .

  14. Bridging the Gap: Linking Simulation and Testing

    Energy Technology Data Exchange (ETDEWEB)

    Krajewski, Paul E.; Carsley, John; Stoudt, Mark R.; Hovanski, Yuri

    2012-09-01

    The Materials Genome Initiative (MGI) which is a key enabler for the Advanced Manufacturing Partnership, announced in 2011 by U.S. President Barack Obama, was established to accelerate the development and deployment of advanced materials. The MGI is driven by the need to "bridge the gap" between (I) experimental results and computational analysis to enable the rapid development and validation of new mateirals, and (II) the processes required to convert these materials into useable goods.

  15. Influence of Icing on Bridge Cable Aerodynamics

    DEFF Research Database (Denmark)

    Koss, Holger; Frej Henningsen, Jesper; Olsen, Idar

    2013-01-01

    determination of these force coefficients require a proper simulation of the ice layer occurring under the specific climatic conditions, favouring real ice accretion over simplified artificial reproduction. The work presented in this paper was performed to study the influence of ice accretion on the aerodynamic...... forces of different bridge cables types. The experiments were conducted in a wind tunnel facility capable amongst others to simulate incloud icing conditions....

  16. Advanced assessment methods for elderly bridges. State-of-the-art and justification based on LCA

    OpenAIRE

    Soriano Chacón, Miriam

    2013-01-01

    [ANGLÈS] Many of the existing bridges do not satisfy the structural requirements specified in design codes for new bridges. However, many of these bridges must remain in service and therefore decisions must be made in order to maintain their safety. In the design of new bridges, it is accepted “to be on the safe side” inherent in the standards; but for an assessment of an elderly bridge this procedure should be removed in order to have a more realistic understanding of the stat...

  17. Monitoring of concrete bridges

    Czech Academy of Sciences Publication Activity Database

    Pirner, Miroš; Urushadze, Shota

    Orlando,Florida: Society for Experimental Mechanics, Inc, 2007 - (Wicks, A.), s. 250-257 ISBN 0-912053-97-6. [IMAC, Conference & Exposition on Structural Dynamics/25./. Orlando (US), 17.02.2007-19.02.2007] R&D Projects: GA MDS(CZ) 1F45D/013/120; GA ČR(CZ) GA103/05/2066 Institutional research plan: CEZ:AV0Z20710524 Keywords : Long-term measurements * Dynamic response * Bridge * Strain gauges * Rain-flow Subject RIV: JM - Building Engineering

  18. Theory of bridge aerodynamics

    CERN Document Server

    Strømmen, Einar

    2006-01-01

    This text book is intended for studies in wind engineering, with focus on the stochastic theory of wind induced dynamic response calculations for slender bridges or other line ?like civil engineering type of structures. It contains the background assumptions and hypothesis as well as the development of the computational theory that is necessary for the prediction of wind induced fluctuating displacements and cross sectional forces. The simple cases of static and quasi-static structural response calculations are for the sake of completeness also included. The text is at an advanced level in the

  19. User Participation in the Building Process

    DEFF Research Database (Denmark)

    Christiansson, Per; Svidt, Kjeld; Sørensen, Kristian Birch;

    2011-01-01

    functions in the user involvement process. In space (1) 'Contextual Inquiry', the end-users are given tools and motivation to deliver their wishes, needs and views on suggested solutions. Individual views of end-users have to be expressed and consolidated into more general needs, common values must be......Virtual Innovation in Construction (VIC) is a project aiming to develop an Information and Communication Technology (ICT) supported methodology VIC-MET, to involve building end-users in a creative innovation process together with building designers, and to capture and formulate end-user needs and...... requirements on buildings and their functionality. The method gives advisors and clients a set of tools to capture the required knowledge in a creative and innovative design process with end-users, and thus to incorporate user needs in the building. VIC-MET includes four design spaces that support different...

  20. Nondestructive testing for bridge diagnosis

    International Nuclear Information System (INIS)

    There are many motivations for bridge diagnosis using Nondestructive testing (NDT) to monitor its integrity. The measured frequency and damping on real bridge are compared in one figure as a function of span length and general aspects are explained. These date were measured in every construction of bridges and applied to design new bridges. Ultrasonic testing is also well used for concrete and steel members mainly to detect internal damages or delaminations. Detail analysis on reflected waves gives us more accurate information about the defect. Experimental results are shown as examples in this paper.

  1. Modelling railway bridge asset management

    OpenAIRE

    Le, Bryant Linh Hai

    2014-01-01

    The UK has a long history in the railway industry with a large number of railway assets. Railway bridges form one of the major asset groups with more than 35,000 bridges. The majority of the bridge population are old being constructed over 100 years ago. Many of the bridges were not designed to meet the current network demand. With an expected increasing rate of deterioration due to the increasing traffic loads and intensities, the management authorities are faced with the difficult task of k...

  2. CASSIS: A Modeling Language for Customizable User Interface Designs

    OpenAIRE

    Van den Bergh, Jan; CONINX, Karin

    2014-01-01

    Current user interface modeling languages usually focus on modeling a single user interface and have a fixed set of user interface components; adding another user interface component requires an extension of the language. In this paper we present CASSIS, a concise language that supports creation of user interface components using models instead of language extensions. It also allows the specification of design-time and runtime user interface variations. The support for variations has been use...

  3. ArtsBridge America: Bringing the Arts Back to School

    OpenAIRE

    Brouillette, Liane R.; Burns, Maureen A.

    2005-01-01

    This article examines the origin of ArtsBridge America, a K-12 school/university arts education partnership. It also summarizes findings from a research study on the effect that ArtsBridge participation had on a sample of university arts students. The study indicated that the transition from student to teaching artist required transformation of abstract procedural knowledge into a more flexible and fully assimilated performance capacity that could be adapted to a wide variety of situations....

  4. Comparison of Internal and External Prestressing for Typical Highway Bridges

    OpenAIRE

    BURDET, Olivier; Badoux, Marc

    2000-01-01

    The paper presents an analytical comparison of the amount of prestressing required for two similar bridges, one with internal and the other with external prestressing. This comparison shows that bridges with external prestressing can become economically competitive for large girder depths. The detrimental effect of the smaller stress in the prestressing steel at the ultimate limit state is more than compensated by the thinner webs made possible by the absence of the ducts.

  5. Building Organic Bridges: Volume 3, Indonesia - Sri Lanka

    OpenAIRE

    Rahmann, Gerold; Aksoy, Uygun

    2014-01-01

    [Foreword ...] The 18th IFOAM Organic World Congress held on 13-15 October, 2014 in Istanbul-Turkey targets to 'build organic bridges'. The Scientific track will contribute to bridging not only scientists but also institutions and disciplines, and to linking more developed and less developed, rural and urban, research to extension, plant to animal, farm practices to world-wide problems and producer and consumers. Organic is a management system that requires a diversity of inputs from differen...

  6. Building Organic Bridges: Volume 4, Sweden - Viet Nam

    OpenAIRE

    Rahmann, Gerold; Aksoy, Uygun

    2014-01-01

    [Foreword ...] The 18th IFOAM Organic World Congress held on 13-15 October, 2014 in Istanbul-Turkey targets to 'build organic bridges'. The Scientific track will contribute to bridging not only scientists but also institutions and disciplines, and to linking more developed and less developed, rural and urban, research to extension, plant to animal, farm practices to world-wide problems and producer and consumers. Organic is a management system that requires a diversity of inputs from differen...

  7. Bridging book : a not-so-electronic children's picturebook

    OpenAIRE

    Figueiredo, Ana Carina; Pinto, Ana Lúcia; Branco, Pedro; Zagalo, Nelson; Coquet, Eduarda

    2013-01-01

    We present and technically describe the implementation of a book prototype: the Bridging Book, a children's mixed-media picturebook that blurs the line between printed and electronic books. Bridging book consists of a printed book and a digital device, placed side-by-side, with synchronized content. Thumbing through the book's pages triggers the device to display the complementary digital content. The physical book requires no batteries or wires. In the current version...

  8. Assessment of Infrared Thermography for NDE of FRP Bridge Decks

    OpenAIRE

    Miceli, Marybeth

    2000-01-01

    Statistics released in the fall 1989 showed that 238,357 (41%) of the nation's 577,710 bridges are either structurally deficient or functionally obsolete. New materials, such as fiber reinforced polymeric composites (FRP), are being suggested for use in bridge systems to solve some of the current problems. These materials are thought to be less affected by corrosive environmental conditions than conventional civil engineering materials. Therefore they may require less maintenance and provi...

  9. Environmental life cycle assessment comparison between two bridge types: reinforced concrete bridge and steel composite bridge

    DEFF Research Database (Denmark)

    Du, Guangli; Karoumi, Raid

    2013-01-01

    The concept of sustainable construction has attracted an increased attention. Bridge infrastructures and their belonged construction activities consume considerable material and energy, which is responsible for large environmental burdens. However, the environmental assessment of bridges has not...... been integrated into the decision-making process. This paper presents a systematic LCA method for quantifying the environmental impacts for bridges. The comparison study is performed between a reinforced concrete bridge and a steel bridge as an alternative design, with several key maintenance and EOL...... scenarios outlined. LCA study is performed with the ReCiPe methodology with life cycle inventories data from public database. Five selected mid-point level impact categories and the energy consumption are presented. The result shows that the steel bridge has a better environmental performance due to the...

  10. Requirement Elicitation for Requirement in Software Engineering

    OpenAIRE

    Swathine.K*; Dr. J.KomalaLakshmi

    2014-01-01

    Requirement Elicitation is also called as Requirement Gathering, in which requirements are collected from User, Stakeholders, and Customer to build the system. Requirements elicitation practices include interviews, questionnaires, task analysis, domain analysis, user observation, workshops, brainstorming, use cases, role playing and prototyping by using this practices quality of the requirements are satisfied. A wide variety of tools exist that have been developed and used to supp...

  11. User Association for Load Balancing in Heterogeneous Cellular Networks

    CERN Document Server

    Ye, Qiaoyang; Chen, Yudong; Al-Shalash, Mazin; Caramanis, Constantine; Andrews, Jeffrey G

    2012-01-01

    For small cell technology to significantly increase the capacity of tower-based cellular networks, mobile users will need to be actively pushed onto the more lightly loaded tiers (corresponding to, e.g., pico and femtocells), even if they offer a lower instantaneous SINR than the macrocell base station (BS). Optimizing a function of the long-term rates for each user requires (in general) a massive utility maximization problem over all the SINRs and BS loads. On the other hand, an actual implementation will likely resort to a simple biasing approach where a BS in tier j is treated as having its SINR multiplied by a factor A_j>=1, which makes it appear more attractive than the heavily-loaded macrocell. This paper bridges the gap between these approaches through several physical relaxations of the network-wide optimal association problem, whose solution is NP hard. We provide a low-complexity distributed algorithm that converges to a near-optimal solution with a theoretical performance guarantee, and we observe ...

  12. Bridging Gaps For Better amp Smarter Mobile Applications

    Directory of Open Access Journals (Sweden)

    Sailesh Chand

    2015-08-01

    Full Text Available Abstract In recent years there has been considerable research interest in mobile applications development in particular on ontology and context-awareness. In this review paper the aim is to understand current challenges in mobile applications development and find gaps to bridge for better and smarter mobile applications in the future. We believe the ideas suggested in opportunities will allow researchers to redesign related hardware and software technologies for greater functionalities and better user experiences and application developers to make future applications that are more productive in the users context.

  13. User Innovation Management

    DEFF Research Database (Denmark)

    Kanstrup, Anne Marie; Bertelsen, Pernille

    User Innovation Management (UIM) is a method for fo-opereation with users in innovation projects. The UIM method emphasizes the practice of a participatorty attitude.......User Innovation Management (UIM) is a method for fo-opereation with users in innovation projects. The UIM method emphasizes the practice of a participatorty attitude....

  14. Building Bridges and Interfaces: Toward the Next Generation of UIMS

    OpenAIRE

    Hartson, H. Rex; Hix, Deborah

    1987-01-01

    User interface management systems (UIMS) have established themselves in both research and commercial arenas. We present several generations in UIMS evolution and discuss some problems of the early generations. In particular, we discuss the problems of a gap between methods used by behavioral scientists and computer scientists during the process of building interfaces. We present an empirical approach to begin bridging this gap and results of our preliminary observations: a human-computer int...

  15. Vulnerability of bridges to fire

    DEFF Research Database (Denmark)

    Giuliani, Luisa; Crosti, C.; Gentili, F.

    2012-01-01

    Even if recent effort in developing methodology and measures for design structures against fire and explosions has been mostly focused on buildings, bridges can also be very sensitive to those actions, as witnesses by some recent bridge accidents, which caused major economic losses and also endan...

  16. Semi-active vibration control in cable-stayed bridges under the condition of random wind load

    International Nuclear Information System (INIS)

    This paper aims at an experimental study on the real-time vibration control of bridge structures using a semi-active vibration control method that has been in the spotlight recently. As structures are becoming larger and larger, structural harmful vibration caused by unspecified external forces such as earthquakes, gusts of wind, and collisions has been brought to attention as an important issue. These harmful vibrations can cause not only user anxiety but also severe structural damage or even complete failure of structures. Therefore, in view of structural safety and economical long-term maintenance, real-time control technology of the harmful structural vibration is urgently required. In this paper, a laboratory-scale model of a cable-stayed bridge was built, and a shear-type MR damper and a semi-active vibration control algorithm (Lyapunov and clipped optimal) were applied for the control of harmful vibration of the model bridge, in real time. On the basis of the test results, each semi-active control algorithm was verified quantitatively. (papers)

  17. Smart semiconductor bridge (SCB) igniter for explosives

    Science.gov (United States)

    Bickes, R. W., Jr.

    We have developed a silicon semiconductor bridge (SCB) igniter which, when driven with a low-energy current pulse, produces a plasma discharge that ignites explosive materials pressed against the bridge. Our experiments have demonstrated that SCB explosive devices function in a few tens of microseconds at one-tenth the input energy of hot-wire devices. Despite the low input energies for ignition, tests have revealed SCB devices to be explosively safe, passing electrostatic discharge (ESD) requirements and no-fire current levels. In fact, SCB devices have better no-fire characteristics than hot-wire devices, because of the intimate bridge contact with the underlying thermally conductive substrate. We have tested several different prototype explosive devices including pyrotechnic actuators, secondary explosive deflagration-to-detonation detonators and a primary explosive detonator. In addition, we have tested SCB actuators with breadboarded smart firing sets that will fire the SCB actuators only after transmission of a digital code, after a preset delay, or in a preprogrammed sequence. We have also tested an optical system that requires only a single fiber optic cable connecting the SCB device to a low power laser that both energizes the firing set and transmits a coded firing signal.

  18. Superconductivity in small metal bridges

    International Nuclear Information System (INIS)

    Josephson effects in weaklinks are discussed for low and high frequency regimes using simple perturbation techniques. It is proven that no measurement of the supercurrent dependence upon frequency above the Riedel peak frequency can be made using rf sources whose frequencies are below the Riedel peak. Thus the bulk of work done in the field on the high frequency structure of the Josephson current is shown to be invalid. Metal bridges shorter than a newly defined temperature independent length for superconductors, l/sub PHONON/, are proven to be identical in their Josephson current behavior to tunneling junctions. The BCS gap equation is generalized to include voltage gradient effects on pairs within the bridge. The oscillation frequency for long bridges (l/sub BRIDGE/ greater than l/sub PHONON/) is shown to be limited to less than 10'' Hz. An experimental test of the new voltage dependent gap is made as well as tests of the pair reforming time of bridges

  19. Half Bridge Inductive Heater

    Directory of Open Access Journals (Sweden)

    Zoltán GERMÁN-SALLÓ

    2015-12-01

    Full Text Available Induction heating performs contactless, efficient and fast heating of conductive materials, therefore became one of the preferred heating procedure in industrial, domestic and medical applications. During induction heating the high-frequency alternating currents that heat the material are induced by means of electromagnetic induction. The material to be heated is placed inside the time-varying magnetic field generated by applying a highfrequency alternating current to an induction coil. The alternating electromagnetic field induces eddy currents in the workpiece, resulting resistive losses, which then heat the material. This paper describes the design of a power electronic converter circuit for induction heating equipment and presents the obtained results. The realized circuit is a low power half bridge resonant inverter which uses power MOS transistors and adequate driver circuits.

  20. Semiconductor bridge, SCB, ignition of energetic materials

    Energy Technology Data Exchange (ETDEWEB)

    Bickes, R.W.; Grubelich, M.D.; Harris, S.M.; Merson, J.A.; Tarbell, W.W.

    1997-04-01

    Sandia National Laboratories` semiconductor bridge, SCB, is now being used for the ignition or initiation of a wide variety of exeoergic materials. Applications of this new technology arose because of a need at the system level to provide light weight, small volume and low energy explosive assemblies. Conventional bridgewire devices could not meet the stringent size, weight and energy requirements of our customers. We present an overview of SCB technology and the ignition characteristics for a number of energetic materials including primary and secondary explosives, pyrotechnics, thermites and intermetallics. We provide examples of systems designed to meet the modern requirements that sophisticated systems must satisfy in today`s market environments.

  1. Construction and control technology of the main bridge superstructure of Sutong Bridge

    Institute of Scientific and Technical Information of China (English)

    Zhang Hong; Luo Chenbin; Zhang Yongtao; You Xinpeng

    2009-01-01

    The Sutong Yangtze River Bridge (short as Sutong Bridge) is now the largest span cable-stayed bridge in the world. The construction of the superstructure of the middle bridge covered several stages including erection of the big block girders for the side span, assistant span and tower area, erection of standard girders and closure of the middle span. The big block girders were hoisted by a floating crane, and the standard girders were hoisted by a double crane system on the deck. The pushing assistant method was adopted for the middle span closure construction. Furthermore, key technologies and innovative methods used in the processes of girder erection and cable assemblage in all stages were expatiated systematically. An all-stage self- adaptive geometry control method was used in the construction process. By accurately controlling the unstressed dimensions and shape of all structural components in each step, and realization that the control system and the controlled system adapt to each other, the goal was to make control of the final line shape and inner force of the bridge structure achievable. Two solutions, including GPS based and total station based dynamic geometry monitoring systems, were used to resolve the measure problem under the wide-range of wind-induced vibrations in the long cantilever state. Finally, research on the wind-induced vibration of the superstructure during the construction period was executed. Buffeting response analysis to the longest single and double cantilever states were carried out. The analysis and evaluation of wind resistance safety of the main girders under the longest single cantilever state was made, and corresponding wind resistance measures were suggested. The as-built geometric error and cable force error were controlled in a required design range, and this whole technological achievement can be a benchmark for construction of other large span cable-stayed bridges in the future.

  2. Optimization of Maintenance Strategies for the Management of the National Bridge Stock in France

    OpenAIRE

    Orcesi, André; CREMONA, Christian

    2011-01-01

    Maintenance and repair activities are crucial to prevent the deterioration of highway bridges and ensure users' safety. In 2006, the French Ministry of Transportation initiated a survey to improve the maintenance strategies of its bridge stock. This study was justified by the introduction of new financial regulations in France. Each Ministry is now enforced to assess its performance through indicators and targets. On behalf of the Ministry of Transportation, the Roads Directorate needs to det...

  3. Investigating the Number of Users And Months to Make Tulungan Effective Against Self-Promoting Users

    Directory of Open Access Journals (Sweden)

    Alexis V. Pantola

    2015-05-01

    Full Text Available Tulungan is a reputation system for collaborative web filtering that is both consensus-independent and self-promoting resistant. Simulation results show that Tulungan requires less than 50% good users in order to become effective against malicious and self-promoting users (i.e., bad users. Being effective means that it is able to give high reputation values to good users relative to bad users. In addition, the effectiveness of Tulungan is also confirmed by comparing the number of correct URL categorizations that it made against the wrong ones. This is in contrast with other reputation systems that require at least 50% good users in order to be effective against malicious users and even a greater percentage of good users to work against self-promoting users. Although previous studies show the consensus-independent and self-promoting resistant properties of Tulungan, the simulation covers only a fixed number of total users and months. This paper presents additional simulation involving Tulungan that confirms the number of users and months needed for it to become effective. Results show that the reputation values of good users suffer if it involves less than 200 users and 2 simulated months.

  4. GOCE user toolbox and tutorial

    DEFF Research Database (Denmark)

    Knudsen, Per; Benveniste, Jerome

    2011-01-01

    consists of a series of advanced computer routines that carry out the required computations. It may be used on Windows PCs, UNIX/Linux Workstations, and Mac. The toolbox is supported by The GUT Algorithm Description and User Guide and The GUT Install Guide. A set of a-priori data and models are made...

  5. Bridge SHM system based on fiber optical sensing technology

    Science.gov (United States)

    Li, Sheng; Fan, Dian; Fu, Jiang-hua; Huang, Xing; Jiang, De-sheng

    2015-09-01

    The latest progress of our lab in recent 10 years on the area of bridge structural health monitoring (SHM) based on optical fiber sensing technology is introduced. Firstly, in the part of sensing technology, optical fiber force test-ring, optical fiber vibration sensor, optical fiber smart cable, optical fiber prestressing loss monitoring method and optical fiber continuous curve mode inspection system are developed, which not only rich the sensor types, but also provides new monitoring means that are needed for the bridge health monitoring system. Secondly, in the optical fiber sensing network and computer system platform, the monitoring system architecture model is designed to effectively meet the integration scale and effect requirement of engineering application, especially the bridge expert system proposed integration of sensing information and informatization manual inspection to realize the mode of multi index intelligence and practical monitoring, diagnosis and evaluation. Finally, the Jingyue bridge monitoring system as the representative, the research on the technology of engineering applications are given.

  6. Incorporation of nondestructive evaluation in Pontis Bridge Management System

    Science.gov (United States)

    Hadavi, Ahmad

    1998-03-01

    The highway system in the United States includes nearly 577,000 bridges, the majority of which were built during two major bridge building periods -- just before World War II (1930s) and in the first two decades of the Cold War (1950s and 1960s). Given the age and increased usage of these bridges over the years, many now require substantial maintenance to satisfy their desired level of service. The complex task of allocating scarce funds for the repair, maintenance, and rehabilitation of this large number of bridges led to the development of several optimization studies and two major bridge management system, namely BRIDGIT and Pontis. Pontis has emerged as the system of choice for all states in the Nation. At this time over 40 highway agencies continue to license, evaluate and implement the current AASHTOWARE Program, Pontis V. 3.2. However, all data currently required by Pontis to assess the structural stability and resulting suggestions for repair and maintenance of bridges are based on visual inspection and judgement. Consequently, all suggestions are based on that visual inspection. This paper discusses development of a plan for how non-destructive evaluation (NDE) data can be used to provide more information than visual inspection.

  7. Helping System Engineers Bridge the Peaks

    Science.gov (United States)

    Rungta, Neha; Tkachuk, Oksana; Person, Suzette; Biatek, Jason; Whalen, Michael W.; Castle, Joseph; Castle, JosephGundy-Burlet, Karen

    2014-01-01

    In our experience at NASA, system engineers generally follow the Twin Peaks approach when developing safety-critical systems. However, iterations between the peaks require considerable manual, and in some cases duplicate, effort. A significant part of the manual effort stems from the fact that requirements are written in English natural language rather than a formal notation. In this work, we propose an approach that enables system engineers to leverage formal requirements and automated test generation to streamline iterations, effectively "bridging the peaks". The key to the approach is a formal language notation that a) system engineers are comfortable with, b) is supported by a family of automated V&V tools, and c) is semantically rich enough to describe the requirements of interest. We believe the combination of formalizing requirements and providing tool support to automate the iterations will lead to a more efficient Twin Peaks implementation at NASA.

  8. Electronic Commerce user manual

    Energy Technology Data Exchange (ETDEWEB)

    1992-04-10

    This User Manual supports the Electronic Commerce Standard System. The Electronic Commerce Standard System is being developed for the Department of Defense of the Technology Information Systems Program at the Lawrence Livermore National Laboratory, operated by the University of California for the Department of Energy. The Electronic Commerce Standard System, or EC as it is known, provides the capability for organizations to conduct business electronically instead of through paper transactions. Electronic Commerce and Computer Aided Acquisition and Logistics Support, are two major projects under the DoD's Corporate Information Management program, whose objective is to make DoD business transactions faster and less costly by using computer networks instead of paper forms and postage. EC runs on computers that use the UNIX operating system and provides a standard set of applications and tools that are bound together by a common command and menu system. These applications and tools may vary according to the requirements of the customer or location and may be customized to meet the specific needs of an organization. Local applications can be integrated into the menu system under the Special Databases Applications option on the EC main menu. These local applications will be documented in the appendices of this manual. This integration capability provides users with a common environment of standard and customized applications.

  9. Electronic Commerce user manual

    Energy Technology Data Exchange (ETDEWEB)

    1992-04-10

    This User Manual supports the Electronic Commerce Standard System. The Electronic Commerce Standard System is being developed for the Department of Defense of the Technology Information Systems Program at the Lawrence Livermore National Laboratory, operated by the University of California for the Department of Energy. The Electronic Commerce Standard System, or EC as it is known, provides the capability for organizations to conduct business electronically instead of through paper transactions. Electronic Commerce and Computer Aided Acquisition and Logistics Support, are two major projects under the DoD`s Corporate Information Management program, whose objective is to make DoD business transactions faster and less costly by using computer networks instead of paper forms and postage. EC runs on computers that use the UNIX operating system and provides a standard set of applications and tools that are bound together by a common command and menu system. These applications and tools may vary according to the requirements of the customer or location and may be customized to meet the specific needs of an organization. Local applications can be integrated into the menu system under the Special Databases & Applications option on the EC main menu. These local applications will be documented in the appendices of this manual. This integration capability provides users with a common environment of standard and customized applications.

  10. Liquid-Bridge Breaking Limits

    Science.gov (United States)

    Macner, Ashley; Steen, Paul

    2011-11-01

    Wet adhesion by liquid bridges in large arrays shows promise for use in lightweight, controllable on-demand devices. Applications include grab/release of wafer substrates, transport of micron-sized tiles for use in 3D printing and micro-dosing of personalized pharmaceutical drugs. By wetting and spreading, a drop can form a bridge and thereby ``grab'' a nearby solid substrate. By volume decrease or extension, the bridge can break. The breaking limit corresponds to bridge instability which can be predicted, knowing the static mechanical response of the bridge. Mechanical behaviors include force-volume (FV), pressure-volume (pV) and force-length (FL) responses. Instability crucially depends on the mode of failure - failure under constant-force or constant length are typical cases. We study single bridge equilibria for their breaking limits. FV diagrams for the pin-pin equal and pin-pin unequal radii boundary conditions for different bridge heights are measured in the laboratory. The FL response in the case of pin-pin equal radii is also measured. Results are compared to predictions of static theory. Static results are then used to compare to dynamical sequences where volume is driven quasistatically by syringe or an electro-osmotic pump. As the breaking limit is approached, the shape deformation accelerates leading to non-equilibrium shapes not captured by the static analysis.

  11. Accelerator facilities users' guide

    International Nuclear Information System (INIS)

    In 1981 the ''Green Book'' of SIN was distributed, a User Handbook serving the needs of people already working at SIN as well as informing new users about our installations. An update of the Green Book is necessary because many beams have disappeared, been modified or added, and the installation has been upgraded in intensity and versatility quite considerably. The spectrum of users has shifted away from nuclear and particle physics; applications in medicine, solid state physics and materials science have gained in importance. This Users' Guide is intended to inform our users about the changes, and to interest potential new users in coming to PSI. (author) figs., tabs

  12. Bridge Creek IMW database - Bridge Creek Restoration and Monitoring Project

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The incised and degraded habitat of Bridge Creek is thought to be limiting a population of ESA-listed steelhead (Oncorhynchus mykiss). A logical restoration...

  13. National Bridge Inventory - National Geospatial Data Asset (NGDA) Bridges

    Data.gov (United States)

    Department of Transportation — The NBI (NTAD 2015) is a collection of information (database) describing the more than 610,000 of the Nation's bridges located on public roads, including Interstate...

  14. A social network perspective of lead users and creativity

    DEFF Research Database (Denmark)

    Kratzer, Jan; Lettl, Christopher

    2008-01-01

    closely correlates to individual creativity, and both, in turn, to the provision of information in social networks. This study, guided by lead user theory, creativity research and network theory, investigates 16 school-groups of children examining the relationship between the children's social networks...... and their resulting creativity and lead userness. In addition, the interplay between lead userness and creativity is discussed and empirically tested. The main result of this study is that children who are positioned as bridging links between different groups in social networks reveal both a high...

  15. Reliability Assessment of Concrete Bridges

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle; Middleton, C. R.

    This paper is partly based on research performed for the Highways Agency, London, UK under the project DPU/9/44 "Revision of Bridge Assessment Rules Based on Whole Life Performance: concrete bridges". It contains the details of a methodology which can be used to generate Whole Life (WL) reliability...... profiles. These WL reliability profiles may be used to establish revised rules for concrete bridges. This paper is to some extend based on Thoft-Christensen et. al. [1996], Thoft-Christensen [1996] et. al. and Thoft-Christensen [1996]....

  16. Solar information user priority study

    Energy Technology Data Exchange (ETDEWEB)

    Belew, W.W.; Wood, B.L.

    1980-05-01

    This report identifies for each solar technology those members or potential members of the solar community who, either currently or in the future, will require solar information. In addition, it rates each user's relative need for information within the next three years. This information will be used as input for subsequent studies that will identify specific user needs information. These studies, in turn, will be the basis for information product and data base development for the Solar Energy Information Data Bank (SEIDB). In addition, they will be input for the Technical Information Dissemination (TID) Program.

  17. User-centered agile method

    CERN Document Server

    Deuff, Dominique

    2013-01-01

    Agile development methods began to emerge around 20 years ago. However, it was not until the early 2000s that they began to be widely used in industry. This growth was often due to the advent of Internet services requiring faster cycles of development in order to heighten the rate at which an ever-greater number of functionalities were made available. In parallel, user-centered design (UCD) methods were also becoming more and more widely used: hence, user-centered design and agile methods were bound to cross paths, at least in the telecoms industry! During this period, in the field of telec

  18. User involvement in the innovation process

    DEFF Research Database (Denmark)

    Christensen, Dan Saugstrup

    2008-01-01

    deployed as it indicates that users residing on the leading edge of any given market, technology, etc. are more likely to develop innovations compared to more ordinary users as the lead users will be experiencing needs and requirements presently, which the ordinary users will not experience until later...... as a foundation for developing better and more supportive service and application concepts within the information and communication technology domain. Three interrelated research areas are deployed within the theoretical framework, which combined constitute and highlight the intertwined and complex interaction...... of people and their use of information and communication technologies: mobile system requirements, mobility, and the concept of Personal Networks. The mobile system requirement perspective is related to providing a more user oriented research approach, which historically has not been the case. The mobility...

  19. Structural response of circular concrete filled tube piers in integral bridges

    OpenAIRE

    Kovac, Borisa

    2010-01-01

    Nowadays most of the bridges are designed with movable joints and bearings. They are used to allow for bridge deck displacements produced by: expansion and contraction of the bridge deck due to temperature changes, breaking or accelerating forces of vehicles and by long term changes of concrete such as creeping and shrinking. Joints and bearings are susceptible to durability problems and require maintenance and replacements. In order to reduce the maintenance costs and to lower the init...

  20. Stress and deformation state of suspension steel bridges with rigid cables

    OpenAIRE

    Grigorjeva, Tatjana

    2007-01-01

    Suspension bridges possess a number of advantages, allowing overlapping average and large spans. The basic disadvantage of suspension bridges can be considered their increased deformability, particularly under the action of non-symmetrical and local loads. Deformability depends, in general, on the kinematical character of displacements of a flexible suspension cable. Required rigidity of suspension bridges is achieved, by increasing the height, and consequently the weight of a stiffening gird...

  1. Bridging the urological divide.

    Science.gov (United States)

    Roberts, Robin

    2011-09-23

    The advanced disease clinical presentations, higher morbidity and mortality rates and lack of available treatment options in prostate cancer care, attest to disparities in the delivery and outcomes of urological services in Black men of African lineage in both the Developed and Developing countries. This gap in health care and services in the global management of prostate cancer denotes the urological divide.Through the experience of a Developing country urologist with a comparative literature review, this presentation defines the determinants of the disparity through deficiencies in human, material and financial resources, as is most prevalent in Developing countries.Solutions to ending health care disparities must take into account the existing development phase of Third World countries and thus determine whether the Developed countries should export a total service delivery system or seek primarily to advance the competence and skills of the existing Developing country resources.Collaboration in prostate cancer research has the greatest promise and sustainability of bridging this urological divide and is of mutual benefit to both entities. PMID:21992183

  2. User evaluation in practice

    DEFF Research Database (Denmark)

    Krogstrup, Hanne Kathrine

    The BIKVA-model (brugerinddragelse i kvalitetsvurdering) or in english UPQA (User Participation in Quality Assessment) are presented......The BIKVA-model (brugerinddragelse i kvalitetsvurdering) or in english UPQA (User Participation in Quality Assessment) are presented...

  3. Mineral bridges in nacre revisited

    CERN Document Server

    Checa, Antonio G; Willinger, Marc-Georg

    2012-01-01

    We confirm with high-resolution techniques the existence of mineral bridges between superposed nacre tablets. In the towered nacre of both gastropods and the cephalopod Nautilus there are large bridges aligned along the tower axes, corresponding to gaps (150-200 nm) in the interlamellar membranes. Gaps are produced by the interaction of the nascent tablets with a surface membrane that covers the nacre compartment. In the terraced nacre of bivalves bridges associated with elongated gaps in the interlamellar membrane (> 100 nm) have mainly been found at or close to the edges of superposed parental tablets. To explain this placement, we hypothesize that the interlamellar membrane breaks due to differences in osmotic pressure across it when the interlamellar space below becomes reduced at an advanced stage of calcification. In no cases are the minor connections between superimposed tablets (< 60 nm), earlier reported to be mineral bridges, found to be such.

  4. Bridge Culture of Langde Village

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Langde, a village in Leishan County ofsouthwestern Guizhou province, is known for itslarge number of unique bridges bearing the distinctdesign style of the Miao ethnic group. Animpressive variety of well-preserved ancient

  5. Simulation of multivariate diffusion bridges

    DEFF Research Database (Denmark)

    Bladt, Mogens; Finch, Samuel; Sørensen, Michael

    We propose simple methods for multivariate diffusion bridge simulation, which plays a fundamental role in simulation-based likelihood and Bayesian inference for stochastic differential equations. By a novel application of classical coupling methods, the new approach generalizes a previously...

  6. User Frustrations as Opportunities

    OpenAIRE

    Michael Weiss

    2012-01-01

    User frustrations are an excellent source of new product ideas. Starting with this observation, this article describes an approach that entrepreneurs can use to discover business opportunities. Opportunity discovery starts with a problem that the user has, but may not be able to articulate. User-centered design techniques can help elicit those latent needs. The entrepreneur should then try to understand how users are solving their problem today, before proposing a solution that draws on the u...

  7. ANGIOGRAPHIC ASPECTS OF MYOCARDIAL BRIDGES

    Directory of Open Access Journals (Sweden)

    Sujatha. M

    2015-12-01

    Full Text Available Introduction: The segment of epicardial coronary artery that traverses intramurally through the myocardium and bridged by a bunch of cardiac muscle fibers is called tunneled artery or intramural artery. The band of cardiac muscle fibers passing over the tunneled artery segment is named as myocardial bridge. During angiography milking effect is observed during systole due to the external pressure of muscle fibers on the tunneled artery that leads to narrowing of vessel lumen and further ischemia. Materials & Methods: It is a prospective study performed from 2012- 2015 in cardiac centers available around Tirupati, Andhra Pradesh, South India. A total number of 2015 adult patients who underwent diagnostic coronary angiography were evaluated to detect myocardial bridges. With the informed consent the relevant data was collected from the patients and analyzed. Results: The prevalence of myocardial bridges was 3.17%. Among the 2015 patients 70.7% are males and 29.2% are females. Among 64 myocardial bridge positive cases 62.5% were male and 37.5% were female patients. Regarding coronary dominance 84% were right dominant and 14.4% were left dominant and 1.6% are balanced. The percentage incidence of myocardial bridging according to dominance was 3.01% for right dominant patients, 4.12% for left dominant patients and 3.1% for balanced dominant patients. In all the myocardial bridge positive cases they were located on the left anterior descending artery (LAD. According to diagnosis the patients with normal coronaries were 22.6%, patients with MILD CAD were 17.9%, patients with single vessel disease were 23.4%, patients with two vessel disease were 14.7% and the patients with triple vessel disease were 21.3%. The 64 myocardial bridging cases were grouped in to three groups according to their age. Incidence of double bridges was observed in 3 cases of which 66.7% males & 33.3% in females. Conclusion: These results show that Andhra Pradesh population are

  8. User interface for a tele-operated robotic hand system

    Science.gov (United States)

    Crawford, Anthony L

    2015-03-24

    Disclosed here is a user interface for a robotic hand. The user interface anchors a user's palm in a relatively stationary position and determines various angles of interest necessary for a user's finger to achieve a specific fingertip location. The user interface additionally conducts a calibration procedure to determine the user's applicable physiological dimensions. The user interface uses the applicable physiological dimensions and the specific fingertip location, and treats the user's finger as a two link three degree-of-freedom serial linkage in order to determine the angles of interest. The user interface communicates the angles of interest to a gripping-type end effector which closely mimics the range of motion and proportions of a human hand. The user interface requires minimal contact with the operator and provides distinct advantages in terms of available dexterity, work space flexibility, and adaptability to different users.

  9. ANGIOGRAPHIC ASPECTS OF MYOCARDIAL BRIDGES

    OpenAIRE

    Sujatha M; V Subhadra Devi; C. S. S. Raju; B. Yugandhar; Nagaraju

    2015-01-01

    Introduction: The segment of epicardial coronary artery that traverses intramurally through the myocardium and bridged by a bunch of cardiac muscle fibers is called tunneled artery or intramural artery. The band of cardiac muscle fibers passing over the tunneled artery segment is named as myocardial bridge. During angiography milking effect is observed during systole due to the external pressure of muscle fibers on the tunneled artery that leads to narrowing of vessel lumen and further isc...

  10. SURGERY OF SYMPTOMATIC MYOCARDIAL BRIDGING

    OpenAIRE

    N. Maghamipour N. Safaei

    2007-01-01

    Myocardial bridging with systolic compression of the left anterior descending coronary artery (LAD) may be associated with myocardial ischemia. In symptomatic myocardial bridging unresponsive to medical treatment, surgical unroofing of the left LAD can be performed. Little information is available about the long-term prognosis of patients with this coronary anomaly after the surgical unroofing, so we decided to evaluate the result of this operation. A total of 26 patients underwent surgical u...

  11. Stability of liquid crystalline bridges

    Science.gov (United States)

    Mahajan, Milind P.; Tsige, Mesfin; Taylor, P. L.; Rosenblatt, Charles

    1999-02-01

    The stability of cylindrical bridges of the liquid crystal octylcyanobiphenyl in an immiscible liquid bath was investigated in the nematic and smectic A phases. In the nematic phase the bridge was found to destabilize at a length-to-diameter (slenderness) ratio R similar to that of ordinary Newtonian fluids. On the other hand, the Bingham behavior of the smectic A phase, i.e., an apparent yield stress, enabled the formation of stable columns with R well in excess of π.

  12. NPAS Users Guide

    International Nuclear Information System (INIS)

    This NPAS Users Guide is primarily intended as a source of information about policies, procedures, and facilities appropriate for users in the program of Nuclear Physics at SLAC (NPAS). General policies and practices are described, the preparation of proposals is discussed, and the services for users is outlined. SLAC experimental facilities are described, and contacts are listed

  13. Getting grid users together

    CERN Multimedia

    Appleton, Owen

    2007-01-01

    "While Grid conferences are becoming ever more popular, many of them remain primarily IT events, with few if any users attending. Not so the second EGEE User Forum, an event specifically designed to bring together the diverse user community that makes use of the EGEE grid infrastructure." (1 page)

  14. SURGERY OF SYMPTOMATIC MYOCARDIAL BRIDGING

    Directory of Open Access Journals (Sweden)

    N. Maghamipour N. Safaei

    2007-06-01

    Full Text Available Myocardial bridging with systolic compression of the left anterior descending coronary artery (LAD may be associated with myocardial ischemia. In symptomatic myocardial bridging unresponsive to medical treatment, surgical unroofing of the left LAD can be performed. Little information is available about the long-term prognosis of patients with this coronary anomaly after the surgical unroofing, so we decided to evaluate the result of this operation. A total of 26 patients underwent surgical unroofing of myocardial bridging. Patients had a myocardial bridge of at least 3 cm in length in the middle of LAD and with more than 70% compression during systole. Unroofing was performed with cardiopulmonary bypass in 16 and with off pump technique in 10 patients. In 6 patients repeat angiographies for control of myotomy were done. In one of them a nonsignificant 20% narrowing was seen. Postoperative scintigraphic and angiographic studies demonstrated restoration of coronary flow and myocardial perfusion without residual myocardial bridges under beta-stimulation in 24 patients. Two patients had residual narrowing. With off pump technique, 1 patient had perforation of the right ventricle and 1 patient underwent reoperation because of incomplete unroofing during the first operation. None of the patients with cardiopulmonary bypass technique had residual chest pain or other complications. Surgical unroofing of myocardial bridging with the aid of cardiopulmonary bypass is a safe and easy procedure with low operative risk and with excellent functional results.

  15. An integrated FBG sensing system for bridge health monitoring

    Science.gov (United States)

    Sun, Ru-Jiao; Sun, Zhi; Dan, Dan-Hui; Sun, Li-Min

    2006-03-01

    Thanking to its distinguishing advantages including wavelength multiplexing capability, miniature size, high sensitivity, immunity from electro-magnetic interference and etc, the fiber Bragg grating (FBG) sensing technologies are regarded as a competent candidate for the bridge long-term health monitoring. According to the shifted Bragg wavelength of the light reflected by a fiber grating, the FBG sensors can accurately measure various physical properties such as strain, temperature, displacement, acceleration and corrosion. One special advantage of the FBG sensing technology is that only one demodulation device is required to acquire various physical properties simultaneously. Compared with the bridge health monitoring system using conventional sensors, this advantage makes the quasi-distributed sensing possible and data transmission more convenient because many FBG sensors can be connected in series by a single fiber. In this paper, an integrated FBG sensing system is presented for monitoring the physical state of a real bridge, the main-navigation channel cable-stayed bridge of the Donghai Bridge. The strain variation of two selected sections in the construction stage and during the load trial test are continuously monitored. The results of this study will supply a good guidance for the use of FBG sensors on the health monitoring of real bridges. Finally, the paper present the design and fabrication of an accelerometer based on the FBG technology for structure vibration monitoring.

  16. Wave-current force on bridge foundation

    OpenAIRE

    Pan, J.N.; Wang, D.T.; Wang, X. G.; Nie, F

    2013-01-01

    Many cross-sea bridges have been constructed or in construction in the Chinese coastal areas, such as Hangzhou Bay Bridge, East China Sea Bridge and Hong Kong-Zhuhai-Macau Bridge, etc. Usually the foundations of cross-sea bridges will bear the load of wave and current simultaneously, the extreme value of which is an important factor for bridge design. It is quite difficult to estimate the extreme wave-current forces on bridge foundations due to their complex form, for example a polygonal plat...

  17. Distributed Bayesian Networks for User Modeling

    DEFF Research Database (Denmark)

    Tedesco, Roberto; Dolog, Peter; Nejdl, Wolfgang;

    2006-01-01

    The World Wide Web is a popular platform for providing eLearning applications to a wide spectrum of users. However – as users differ in their preferences, background, requirements, and goals – applications should provide personalization mechanisms. In the Web context, user models used by such...... adaptive applications are often partial fragments of an overall user model. The fragments have then to be collected and merged into a global user profile. In this paper we investigate and present algorithms able to cope with distributed, fragmented user models – based on Bayesian Networks – in the context...... mechanism efficiently combines distributed learner models without the need to exchange internal structure of local Bayesian networks, nor local evidence between the involved platforms....

  18. Web user interaction : a declarative approach based on XForms

    OpenAIRE

    Honkala, Mikko

    2007-01-01

    This thesis studies next-generation web user interaction definition languages, as well as browser software architectures. The motivation comes from new end-user requirements for web applications: demand for higher interaction, adaptation for mobile and multimodal usage, and rich multimedia content. At the same time, there is a requirement for non-programmers to be able to author, customize, and maintain web user interfaces. Current user interface tools do not support well these new kinds ...

  19. Waste treatability guidance program. User`s guide. Revision 0

    Energy Technology Data Exchange (ETDEWEB)

    Toth, C.

    1995-12-21

    DOE sites across the country generate and manage radioactive, hazardous, mixed, and sanitary wastes. It is necessary for each site to find the technologies and associated capacities required to manage its waste. One role of DOE HQ Office of Environmental Restoration and Waste Management is to facilitate the integration of the site- specific plans into coherent national plans. DOE has developed a standard methodology for defining and categorizing waste streams into treatability groups based on characteristic parameters that influence waste management technology needs. This Waste Treatability Guidance Program automates the Guidance Document for the categorization of waste information into treatability groups; this application provides a consistent implementation of the methodology across the National TRU Program. This User`s Guide provides instructions on how to use the program, including installations instructions and program operation. This document satisfies the requirements of the Software Quality Assurance Plan.

  20. Studies on Technical Development of Railway Steel-Concrete Composite Cirider Bridges in China

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Steel-concrete composite girder bridge boasts the advantages of strong rigidity,low noise and low construction height.Along with the large-scale construction of passengerdedicated lines (PDL) and high-speed lines (HSL),tests and researches on steel-concrete composite girder bridges have been conducted with the main types of which including steel plate girder-concrete composite girder bridge,deck steel truss girder-concrete composite girder bridge,through steel truss girder-concrete composite girder bridge and through type tied arch composite girder bridge.Based on the application and researches on steel-concrete composite technology and in combination with the engineering construction of railway bridges,the construction of HSL and PDL and upgrading of existing lines for speed-up in China,this paper analyzes the main structural forms of through steel truss girder-concrete composite girder bridges with different spans and structure systems,carries out studies on the force acted upon these bridges and the related theory and methods for design and computation,and puts forward the solutions required in relation to the key technologies for further development of railway steel-concrete composite girder bridges.

  1. User-Guided Interictal Spike Detection

    OpenAIRE

    El-Gohary, Mahmoud; McNames, James; Elsas, Siegward-M.

    2008-01-01

    In the diagnosis and treatment of epilepsy, long-term monitoring may be required to document and study interictal activities such as interictal spikes. However, visual inspection of the EEG done by an expert is too time consuming and researchers normally resort to automatic detection methods. We describe a new EEG user-guided interictal spike detection algorithm that only requires the user to annotate a few spikes. We use the annotations to build a template that captures the relevant features...

  2. Adopting E-Commerce To User's Needs

    OpenAIRE

    Mohammad Alshehri; Hamza Aldabbas; James Sawle; Mai Abu Baqar

    2012-01-01

    The objectives of this paper are to identify and analyse the extent to which the site is fulfilling all the user’s requirements and needs. The related works comprise the history of interactive design and the benefits of user-centered development, which is the methodology followed in this survey. Moreover, there is a brief comparison between Waterfall and User-centered methodology in terms of addressing the issues of time saving and addressing fulfilment of users’ needs. The data required to ...

  3. Decision making of vending machine users.

    Science.gov (United States)

    Verhoef, L W

    1988-06-01

    This article discusses two possible solutions to decision making about controls by users of vending machines: the 'one button to press' system (requiring a compound decision - the pressing of one button only); the 'several buttons to press' system (requiring a compound decision - the pressing of several buttons). The basis for the discussion is a field evaluation of a train ticket vending machine (TVM) that can sell 800 different types of tickets and can accept all kinds of payment. For this evaluation several hundred TVM users and ticket window users were observed and interviewed. Special attention was paid to the errors which were made. PMID:15676652

  4. User friendly far front ends

    International Nuclear Information System (INIS)

    For years controls group hardware designers have designed microprocessor systems to accomplish specific functions such as refrigeration control. These systems often require years of software effort. The backlog of requests for even simple additions or modifications to software in embedded controllers has become overwhelming. We discuss the requirements of ''far forward'' controllers. Can we build a system that is modular enough to be configurable for specific applications without sacrificing performance? The hardware and software framework must be complete enough to isolate the end user from the peculiarities of bit and byte manipulation, but still allow system specifics to be implanted by the user. It is time to provide embedded controller systems as easy to use as workstation consoles

  5. A strange bridge by Leonardo

    CERN Document Server

    Huylebrouck, Dirk

    2013-01-01

    On folio 855 recto of the Codex Atlanticus, Leonardo da Vinci drew three 'easily movable' bridges, but one of them is enigmatic: all 'replicas' in Leonardo museums and exhibitions come as a surprise, to say the least, to any engineer or architect whose attention is drawn to it. This is the case for models in Amboise (France), Chicago and Portland (USA), Florence (Italy) and for the one of the traveling exhibition by the Australian company 'Grande Exhibitions' that already visited 40 major cities in the world. All 'replicas' of the bridge model attributed to Leonardo have pillars standing on the deck of the bridge, while the deck is suspended by cables attached on these pillars. At first sight this problem does not catch the attention of the observer, as the bridge seems to be a mixed form of a beam and a suspension bridge, but it was not overlooked by my colleague architect-engineer Dr. Laurens Luyten (Gent, Belgium). Yet, after a TV-interview in Brussels so much pressure was exerted by some of the museum col...

  6. Floating liquid bridge charge dynamics

    Science.gov (United States)

    Teschke, Omar; Soares, David Mendez; Gomes, Whyllerson Evaristo; Valente Filho, Juracyr Ferraz

    2016-01-01

    The interaction of liquid with electric fields is investigated in a configuration where up to 13 kV are applied between electrodes resulting in a 106 V/m electric field in the capillaries and where there is the formation of a free-standing fluid bridge in the interelectrode gap. The Mott-Gurney equation was fitted to the measured ionization current vs applied voltage curve which indicates that the ionization rate at the high-voltage anode electrode dimethylsulfoxide (DMSO) interface and space charging in the interelectrode gap determine the floating liquid bridge current for a given cathode-to-anode voltage. Space charge effects were measured in the cathode becker and also at the liquid bridge since the ionized charges at the anode migrate to the bridge outer surface and decrease the interfacial tension from 43 mJ/m2 to 29 mJ/m2. Two distinct structural regions then form the bridge, a charged plastic (bulk modulus ˜100 MPa) conducting outer layer with a surface conductivity of ˜10-9 Ω-1, which shapes and supports the floating fluid structure, and an inner liquid cylinder, where DMSO molecules flow.

  7. User research & technology, pt.2

    CERN Document Server

    Greifeneder, Elke

    2011-01-01

    This e-book is Part 2 on the theme "User Research and Technology". The research covers the testing of online digital library resources using various methods. Library and information science as a field is changing and the requirements for top quality research are growing more stringent. This is typical of the experience of other professional fields as they have moved from practitioners advising practitioners to researchers building on past results. This e-book contains 12 papers on this theme.

  8. An ID-based mutually authenticated edge-to-edge security architecture for bridged provider networks to secure layer-2 communications

    OpenAIRE

    Ferdous Wahid, Khan

    2011-01-01

    IEEE standardized a Layer-2 security, named Media Access Control security (MACsec), for interoperability. It provides link-based security through hop-by-hop operation. The link-constrained security of MACsec eliminates the confidentiality of user data inside bridges. Hence, high-speed Ethernet-based Broadband networks are susceptible to attacks in large network deployment, where bridges need to be resided in street cabinets, road side poles or public places for easy user access. We propose an...

  9. Analysis of local influences in structural details of the bridges

    Directory of Open Access Journals (Sweden)

    Adam RUDZIK

    2015-03-01

    Full Text Available The article analyses the problems of local influences in structural details of bridges as the critical locations, whose damages or excessive force may directly affect the safety of users. These analyses are shown on selected examples. Presented is the example of local changes in the forms of proper vibrations in the node of the truss bridge that can be used in expert issues concerning the causes of damages. The second example are the changes in stresses in the stay cable anchorage element including the nonlinear material models. Models of this type can be successfully used by engineers as they allow for analysis of selected structural details without the need for detailed mapping of the entire structure, but only a selected section.

  10. Application of the finite element method in the field of tension of technical progress und user requirements. Pt. 2. Review of development with applications in railway technology and power station technology

    International Nuclear Information System (INIS)

    A historical review and selected examples ilustrate the vast importance of a flexible programming environment as offered, e.g., by the ANSYS Parametric Design Language (APDL) and the implementation of batch jobs in FEA. The batch job approach is particularly well suited for engineering problems and supports quality assurance. Implementation in FE program systems should enable the user to use all available software options at any given time for effective analysis and postprocessing workflow. It is shown that the implementation of an automatic linearisation routine and the evaluation of loads referred to effective areas are particularly important functionalities. The user should be able to implement his complete workflow in the programming environment. If a decision must be made, this consideration should be given priority over user-friendliness of the program. (orig.)

  11. Bridge Decomposition of Restriction Measures

    CERN Document Server

    Alberts, Tom

    2009-01-01

    Motivated by Kesten's bridge decomposition for two-dimensional self-avoiding walks in the upper half plane, we show that the conjectured scaling limit of the half-plane SAW, the SLE(8/3) process, also has an appropriately defined bridge decomposition. This continuum decomposition turns out to entirely be a consequence of the restriction property of SLE(8/3), and as a result can be generalized to the wider class of restriction measures. Specifically we show that the restriction hulls with index less than one can be decomposed into a Poisson Point Process of irreducible bridges in a way that is similar to Ito's excursion decomposition of a Brownian motion according to its zeros.

  12. Bridging the Gap: Teachers Cooperating Together to Implement Cooperative Learning

    Science.gov (United States)

    Jolliffe, Wendy

    2015-01-01

    Cooperative learning (CL), in spite of extensive research and documented benefits, is not widely used in England. A review of the literature shows that it requires a staged and sustained approach to implementation, which has led to a gap between its potential and actual use. The case study cited here provides one example of bridging that gap…

  13. Bridging the Gap: The Halifax New Teacher Support Program

    Science.gov (United States)

    Power, Alayne

    2013-01-01

    New teachers require specific and targeted support, as witnessed by alarming rates of attrition in their first years in the profession. Research shows they often struggle to bridge the gap between their university study and effective practice, especially with issues such as assessment, classroom management and diversity. New teachers should have…

  14. Don't Try to Bridge the Literacy Gap Alone

    Science.gov (United States)

    González, Ramón M.

    2015-01-01

    The author is a middle school principal who has spent a decade working on improving literacy among his largely socio-economically disadvantaged student body. Experience and research have shown, the author says, that a successful effort to bridge the literacy gap between children who live in poverty and middle-class students requires a concerted…

  15. Standard guide for mutual inductance bridge applications for wall thickness determinations in boiler tubing

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 This guide describes a procedure for obtaining relative wall thickness indications in ferromagnetic and non-ferromagnetic steels using the mutual inductance bridge method. The procedure is intended for use with instruments capable of inducing two substantially identical magnetic fields and noting the change in inductance resulting from differing amounts of steel. It is used to distinguish acceptable wall thickness conditions from those which could place tubular vessels or piping at risk of bursting under high temperature and pressure conditions. 1.2 This guide is intended to satisfy two general needs for users of industrial Mutual Inductance Bridge (MIB) equipment: (1) the need for a tutorial guide addressing the general principles of Mutual Inductance Bridges as they apply to industrial piping; and (2) the need for a consistent set of MIB performance parameter definitions, including how these performance parameters relate to MIB system specifications. Potential users and buyers, as well as experienced M...

  16. Measuring user engagement

    CERN Document Server

    Lalmas, Mounia; Yom-Tov, Elad

    2014-01-01

    User engagement refers to the quality of the user experience that emphasizes the positive aspects of interacting with an online application and, in particular, the desire to use that application longer and repeatedly. User engagement is a key concept in the design of online applications (whether for desktop, tablet or mobile), motivated by the observation that successful applications are not just used, but are engaged with. Users invest time, attention, and emotion in their use of technology, and seek to satisfy pragmatic and hedonic needs. Measurement is critical for evaluating whether online

  17. Modelling User Needs: Students as Enterprise Analysts%Modelling User Needs: Students as Enterprise Analysts

    Institute of Scientific and Technical Information of China (English)

    GIANMARIO Motta; THIAGO Barroero Daniele Sacco

    2012-01-01

    We illustrate a case study, where students designed enterprise architectures, that were not only welcome but successfully implemented. The success key was threefold. First the analysis framework, that integrates all the aspects of the systems that are relevant to users, namely user interface, rules, and information. Second, the analysis approach, that guides, trough confirmatory sessions, to elicit real requirements from users. Third, the model-to-model transformation, that assures consistency from the highest aggregate abstraction down to an executable model.

  18. Bridging Literacy and Equity: The Essential Guide to Social Equity Teaching. Language & Literacy

    Science.gov (United States)

    Lazar, Althier M.; Edwards, Patricia A.; McMillon, Gwendolyn Thompson

    2012-01-01

    "Bridging Literacy and Equity" synthesizes the essential research and practice of social equity literacy teaching in one succinct, user-friendly volume. Extraordinary K-12 teachers show us what social equity literacy teaching looks like and how it advances children's achievement. Chapters identify six key dimensions of social equity teaching that…

  19. Bridge Number and Conway Products

    OpenAIRE

    Blair, Ryan C.

    2007-01-01

    Schubert proved that, given a composite link $K$ with summands $K_{1}$ and $K_{2}$, the bridge number of $K$ satisfies the following equation: $$\\beta(K)=\\beta(K_{1})+\\beta(K_{2})-1.$$ In ``Conway Produts and Links with Multiple Bridge Surfaces", Scharlemann and Tomova proved that, given links $K_{1}$ and $K_{2}$, there is a Conway product $K_{1}\\times_{c}K_{2}$ such that $$\\beta(K_{1}\\times_{c} K_{2}) \\leq \\beta(K_{1}) + \\beta(K_{2}) - 1$$ In this paper, we define the generalized Conway prod...

  20. Analysis, prediction, and case studies of early-age cracking in bridge decks

    Science.gov (United States)

    ElSafty, Adel; Graeff, Matthew K.; El-Gharib, Georges; Abdel-Mohti, Ahmed; Mike Jackson, N.

    2016-06-01

    Early-age cracking can adversely affect strength, serviceability, and durability of concrete bridge decks. Early age is defined as the period after final setting, during which concrete properties change rapidly. Many factors can cause early-age bridge deck cracking including temperature change, hydration, plastic shrinkage, autogenous shrinkage, and drying shrinkage. The cracking may also increase the effect of freeze and thaw cycles and may lead to corrosion of reinforcement. This research paper presents an analysis of causes and factors affecting early-age cracking. It also provides a tool developed to predict the likelihood and initiation of early-age cracking of concrete bridge decks. Understanding the concrete properties is essential so that the developed tool can accurately model the mechanisms contributing to the cracking of concrete bridge decks. The user interface of the implemented computer Excel program enables the user to input the properties of the concrete being monitored. The research study and the developed spreadsheet were used to comprehensively investigate the issue of concrete deck cracking. The spreadsheet is designed to be a user-friendly calculation tool for concrete mixture proportioning, temperature prediction, thermal analysis, and tensile cracking prediction. The study also provides review and makes recommendations on the deck cracking based mainly on the Florida Department of Transportation specifications and Structures Design Guidelines, and Bridge Design Manuals of other states. The results were also compared with that of other commercially available software programs that predict early-age cracking in concrete slabs, concrete pavement, and reinforced concrete bridge decks. The outcome of this study can identify a set of recommendations to limit the deck cracking problem and maintain a longer service life of bridges.

  1. Analysis, prediction, and case studies of early-age cracking in bridge decks

    Science.gov (United States)

    ElSafty, Adel; Graeff, Matthew K.; El-Gharib, Georges; Abdel-Mohti, Ahmed; Mike Jackson, N.

    2016-05-01

    Early-age cracking can adversely affect strength, serviceability, and durability of concrete bridge decks. Early age is defined as the period after final setting, during which concrete properties change rapidly. Many factors can cause early-age bridge deck cracking including temperature change, hydration, plastic shrinkage, autogenous shrinkage, and drying shrinkage. The cracking may also increase the effect of freeze and thaw cycles and may lead to corrosion of reinforcement. This research paper presents an analysis of causes and factors affecting early-age cracking. It also provides a tool developed to predict the likelihood and initiation of early-age cracking of concrete bridge decks. Understanding the concrete properties is essential so that the developed tool can accurately model the mechanisms contributing to the cracking of concrete bridge decks. The user interface of the implemented computer Excel program enables the user to input the properties of the concrete being monitored. The research study and the developed spreadsheet were used to comprehensively investigate the issue of concrete deck cracking. The spreadsheet is designed to be a user-friendly calculation tool for concrete mixture proportioning, temperature prediction, thermal analysis, and tensile cracking prediction. The study also provides review and makes recommendations on the deck cracking based mainly on the Florida Department of Transportation specifications and Structures Design Guidelines, and Bridge Design Manuals of other states. The results were also compared with that of other commercially available software programs that predict early-age cracking in concrete slabs, concrete pavement, and reinforced concrete bridge decks. The outcome of this study can identify a set of recommendations to limit the deck cracking problem and maintain a longer service life of bridges.

  2. MRDAP User/Developer Documentation

    Energy Technology Data Exchange (ETDEWEB)

    Joshua Cogliati; Michael Milvich

    2009-09-01

    The Multi-Reactor Design and Analysis Platform (MRDAP) is designed to simplify the creation, transfer and processing of data between computational codes. MRDAP accomplishes these objectives with three parts: 1. allows each integrated code, through a plugin, to specify the required input for execution and the required output needed, 2. creates an interface for execution and data transfer, 3. enables the creation of Graphical User Interfaces (GUI) to assist with input preparation and data visualization. Ultimately, the main motivation of this work is to enable analysts (who perform reactor physics calculations routinely), by providing a tool that increases efficiency and minimizes the potential for errors or failed executions.

  3. Optimum selection on bridge erection with floating crane in East China Sea Bridge and Hangzhou Bay Bridge

    Institute of Scientific and Technical Information of China (English)

    Shunquan Qin; Pu Zhou; Youheng Hua

    2004-01-01

    @@ Introduction With the rapid development of China′s economy, many bridges will be built over the Chinese coastal waters of Pacific Ocean. Among them, construction of East China Sea Bridge has been commenced in June 2001, and will be completed at the end of 2005, Hangzhou Bay Bridge was also started to construct in June 2003(Fig. 1). These two ultralong bridges are designed as twin expressway bridges standing side by side each carries a 3-lane one-way carriageway. The total width is 31.5m and 33.0m respectively. East China Sea Bridge starts from Nanhui District, Shanghai and extends to the Yangshan Deep Water Port Area, which is located at one of the Qiqu Islands. The total length of the bridge is about 31.0 km, in which 25 km are on the sea, and 22 km is in the unnavigable region. Hangzhou Bay Bridge across the mouth of Qiantang River.

  4. Weldable fibre Bragg grating sensors for steel bridge monitoring

    International Nuclear Information System (INIS)

    For applications related to the structural health monitoring of steel bridges, novel weldable strain and temperature sensors based on fibre Bragg gratings were developed. These sensors, which can be directly welded to metallic structures, reveal linear responses over typical required measurement ranges and stability over thousands of load and temperature cycles. Proper installation procedures and in-field mechanical protection were also developed and implemented. The significance of the developed sensors was demonstrated through the installation of a complete sensing network on a new circular pedestrian bridge in Aveiro, Portugal, where it was used for loading tests, and also for in-service monitoring of its structural health

  5. ETAP user's manual

    International Nuclear Information System (INIS)

    The event tree analysis technique has been used in Probabilistic Safety Assessment for LWRs to delineate various accident scenarios leading to core melt or containment failure and to evaluate their frequencies. This technique often requires manual preparation of event trees with iterative process and time-consuming work in data handling. For the purpose of reducing manual efforts in event tree analysis, we developed a new software package named ETAP (Event Tree Analysis Supporting Program) for event tree analysis. ETAP is an interactive PC-based program which has the ability to construct, update, document, and quantify event trees. Because of its fast running capability to quantify event trees, use of the EATP program can make it easy to perform the sensitivity studies on a variety of system/containment performance issues. This report provides a user's manual for ETAP, which describes the structure, installation, and use of EATP. This software runs on NEC/PC-9800 or compatible PCs that have a 640 KB memory and MS-DOS 2.11 or higher. (author)

  6. Bridge Coupler for APT

    OpenAIRE

    Greninger, Paul T.; Rodarte, Henry J.

    2000-01-01

    The Coupled Cavity Drift Tube Linac (CCDTL) used in the Accelerator for the Production of Tritium (APT) is fully described elsewhere [1]. The modules are composed of several machined and brazed segments that must account for the accumulation of dimensional tolerances in the build up of the stack. In addition, space requirements dictate that power fed to the accelerator cannot be through the accelerating cavities. As well, we would like to remove a single segment of the accelerator without rem...

  7. Additional user needs

    Energy Technology Data Exchange (ETDEWEB)

    Rorschach, H.E.; Hayter, J.B.

    1986-08-15

    This paper summarizes the conclusions of a discussion group on users' needs held at the Workshop on an Advanced Steady-State Neutron Facility. The discussion was devoted to reactor characteristics, special facilities and siting considerations suggested by user needs.

  8. End-User Design

    OpenAIRE

    Repenning, Alexander

    2007-01-01

    Are UML diagrams a good tool to teach middle school students how to make video games? Probably not, but what kinds end-user design aids such as mental models, scaffolding structures, examples or other kinds of objects to think we can we give to end-users in order to gradually introduce them to good programming practice?

  9. Scale-Bridging Model Development for Coal Particle Devolatilization

    CERN Document Server

    Schroeder, Benjamin B; Smith, Philip J; Fletcher, Thomas H; Packard, Andrew; Frenklach, Michael; Hegde, Arun; Li, Wenyu; Oreluk, James

    2016-01-01

    When performing large-scale, high-performance computations of multi-physics applications, it is common to limit the complexity of physics sub-models comprising the simulation. For a hierarchical system of coal boiler simulations a scale-bridging model is constructed to capture characteristics appropriate for the application-scale from a detailed coal devolatilization model. Such scale-bridging allows full descriptions of scale-applicable physics, while functioning at reasonable computational costs. This study presents a variation on multi-fidelity modeling with a detailed physics model, the chemical percolation devolatilization model, being used to calibrate a scale-briding model for the application of interest. The application space provides essential context for designing the scale-bridging model by defining scales, determining requirements and weighting desired characteristics. A single kinetic reaction equation with functional yield model and distributed activation energy is implemented to act as the scal...

  10. Control of switched reluctance motors using asymmetric half bridge and full bridge drives

    International Nuclear Information System (INIS)

    This paper investigates the control of current and torque at different speed of the SRM (Switched Reluctance Motor) from the motor constructional properties, mathematical model equations, operating principle and power converter topology. The SRM has gained popularity in industry with the fact that it is simple to construct. The other advantages are its rugged construction, low maintenance cost and ability to operate over a wide speed range at constant power. The merits of SRMs are outshined by its innate torque ripple issue, acoustic noise and above all the requirement of expensive control. This paper also discusses the operation and simulation of SRM along with power drive model. In this paper motor mathematical model is simulated with two conventional power converter topologies, asymmetric half bridge converter-and symmetric full bridge converter. Torque and current relationship is observed to find out which drive is suitable for smooth torque operation and have better current control at different speeds. The apparent cost difference is also discussed and it is found that full bridge drive is more suitable for general purpose solution in industry with bearable increase in cost. (author)

  11. Lead User Innovation

    DEFF Research Database (Denmark)

    Brem, Alexander; Larsen, Henry

    2015-01-01

    User innovation and especially the integration of lead users is a key topic in the innovation management literature of recent years. This paper contributes by providing a rare perspective into what easily could be seen as innovation failure, shown from two perspectives. We show how a lack of shared...... imagination hampers participation and kills innovation between interdependent stakeholders at the threshold between invention and innovation in practice. We present a first case in the fun-sport industry where an external lead user and diverse firm representatives in different functions fail to create......, deliver and capture the value of an innovatively new device together. From the perspective of the lead user, we show antecedents and effects of social interaction between organizational actors and the lead user on the development of social capital, especially trust and shared imagination. The second case...

  12. The PANTHER User Experience

    Energy Technology Data Exchange (ETDEWEB)

    Coram, Jamie L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Morrow, James D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Perkins, David Nikolaus [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-09-01

    This document describes the PANTHER R&D Application, a proof-of-concept user interface application developed under the PANTHER Grand Challenge LDRD. The purpose of the application is to explore interaction models for graph analytics, drive algorithmic improvements from an end-user point of view, and support demonstration of PANTHER technologies to potential customers. The R&D Application implements a graph-centric interaction model that exposes analysts to the algorithms contained within the GeoGraphy graph analytics library. Users define geospatial-temporal semantic graph queries by constructing search templates based on nodes, edges, and the constraints among them. Users then analyze the results of the queries using both geo-spatial and temporal visualizations. Development of this application has made user experience an explicit driver for project and algorithmic level decisions that will affect how analysts one day make use of PANTHER technologies.

  13. User Frustrations as Opportunities

    Directory of Open Access Journals (Sweden)

    Michael Weiss

    2012-04-01

    Full Text Available User frustrations are an excellent source of new product ideas. Starting with this observation, this article describes an approach that entrepreneurs can use to discover business opportunities. Opportunity discovery starts with a problem that the user has, but may not be able to articulate. User-centered design techniques can help elicit those latent needs. The entrepreneur should then try to understand how users are solving their problem today, before proposing a solution that draws on the unique skills and technical capabilities available to the entrepreneur. Finally, an in-depth understanding of the user allows the entrepreneur to hone in on the points of difference and resonance that are the foundation of a strong customer value proposition.

  14. Software for user evaluation of user interface designs

    OpenAIRE

    2008-01-01

    Software applications dependent on frequent user interaction need user interfaces with a high degree of usability. However, creating high usability user interfaces is a challenging task for software developers. The results may be highly dependent on individual developers‟ knowledge about usability. User-Centered Design suggests another approach, possibly giving more predictable results: to involve users in the development and evaluation of the user interfaces. To enable such user involvement,...

  15. TMAP7 User Manual

    Energy Technology Data Exchange (ETDEWEB)

    Glen R. Longhurst

    2008-12-01

    The TMAP Code was written at the Idaho National Engineering and Environmental Laboratory by Brad Merrill and James Jones in the late 1980s as a tool for safety analysis of systems involving tritium. Since then it was upgraded to TMAP4 and has been used in numerous applications including experiments supporting fusion safety, predictions for advanced systems such as the International Thermonuclear Experimental Reactor (ITER), and estimates involving tritium production technologies. Its further upgrade to TMAP2000 and now to TMAP7 was accomplished in response to several needs. TMAP and TMAP4 had the capacity to deal with only a single trap for diffusing gaseous species in solid structures. TMAP7 includes up to three separate traps and up to 10 diffusing species. The original code had difficulty dealing with heteronuclear molecule formation such as HD and DT under solution-law dependent diffusion boundary conditions. That difficulty has been overcome. TMAP7 automatically generates heteronuclear molecular partial pressures when solubilities and partial pressures of the homonuclear molecular species are provided for law-dependent diffusion boundary conditions. A further sophistication is the addition of non-diffusing surface species. Atoms such as oxygen or nitrogen or formation and decay or combination of hydroxyl radicals on metal surfaces are sometimes important in reactions with diffusing hydrogen isotopes but do not themselves diffuse appreciably in the material. TMAP7 will accommodate up to 30 such surface species, allowing the user to specify relationships between those surface concentrations and partial pressures of gaseous species above the surfaces or to form them dynamically by combining diffusion species or other surface species. Additionally, TMAP7 allows the user to include a surface binding energy and an adsorption barrier energy. The code includes asymmetrical diffusion between the surface sites and regular diffusion sites in the bulk. All of the

  16. An Expert System for Concrete Bridge Management

    DEFF Research Database (Denmark)

    Brito, J. de; Branco, F. A.; Thoft-Christensen, Palle;

    1997-01-01

    The importance of bridge repair versus new bridge construction has risen in recent decades due to high deterioration rates that have been observed in these structures. Budgets both for building new bridges and keeping the existing ones are always limited. To help rational decision-making, bridge ...... information complemented by a knowledge-based interactive system, BRIDGE-1. To optimize management strategies at the headquarters, the BRIDGE-2 module was implemented, including three submodules: inspection strategy, maintenance and repair....... management systems are presently being implemented by bridge authorities in several countries. The prototype of an expert system for concrete bridge management is presented in this paper, with its functionality relying on two modules. The inspection module relies on a periodic acquisition of field...

  17. Intercellular bridges in vertebrate gastrulation.

    Directory of Open Access Journals (Sweden)

    Luca Caneparo

    Full Text Available The developing zebrafish embryo has been the subject of many studies of regional patterning, stereotypical cell movements and changes in cell shape. To better study the morphological features of cells during gastrulation, we generated mosaic embryos expressing membrane attached Dendra2 to highlight cellular boundaries. We find that intercellular bridges join a significant fraction of epiblast cells in the zebrafish embryo, reaching several cell diameters in length and spanning across different regions of the developing embryos. These intercellular bridges are distinct from the cellular protrusions previously reported as extending from hypoblast cells (1-2 cellular diameters in length or epiblast cells (which were shorter. Most of the intercellular bridges were formed at pre-gastrula stages by the daughters of a dividing cell maintaining a membrane tether as they move apart after mitosis. These intercellular bridges persist during gastrulation and can mediate the transfer of proteins between distant cells. These findings reveal a surprising feature of the cellular landscape in zebrafish embryos and open new possibilities for cell-cell communication during gastrulation, with implications for modeling, cellular mechanics, and morphogenetic signaling.

  18. Architectural engineering of FRP bridges

    OpenAIRE

    Smits, J.E.P.

    2014-01-01

    This paper deals with the use of Fibre Reinforced Polymers (FRP's) in architectural and structural bridge design. The challenges and opportunities that come with this relatively new material are discussed. An inventory is made of recent engineers' solutions in FRP, followed by a discussion on architectural application of FRP's derived from the authors architectural practice.

  19. Artropathies that produce osseous bridges

    International Nuclear Information System (INIS)

    In this paper, it is reviewed the most common artropathies that are presented with osseous bridging, with emphasis in the radiological finding of the spine. Also, it's showed other different radiological finding that can help in the differential diagnosis of this disease, such us the sacroilitis in the ankylosing spondylitis or the osteolysis in the psoriatic arthritis

  20. Case-based User Profiling in a Personal Travel Assistant

    OpenAIRE

    Waszkiewicz, Pawel; Cunningham, Padraig

    1999-01-01

    [Introduction] In this paper we present an architecture for a Personal Travel Assistant (PTA). We focus on the ability of this PTA to elaborate a user?s travel requirements and evaluate offers. These decisions are based on a User Profile that has the interesting characteristic that it adopts a lazy policy on learning from a user?s past behavior. Information on user behaviour is stored in a case base in the form of a Case Retrieval Net (Lenz, Auriol & Manago, 1998). A Retrieval ...

  1. Incorporating User-oriented Security into CC

    DEFF Research Database (Denmark)

    Sharp, Robin

    2009-01-01

    environment which contains not only other computer systems, but also human users. A case study involving the design of a secure medical instrumentation system will be used to illustrate the problems involved in incorporating user requirements into a secure design, so that system, when implemented, will help......Current versions of the Common Criteria concentrate very heavily on technical security issues which are relevant for the design of secure systems. This approach largely ignores a number of questions which can have great significance for whether or not the system can be operated securely in an...... users to understand whether they are operating the system in a secure manner, thus avoiding user-related pitfalls such as leaking of confidential data as a result of inappropriate input, loss of patient privacy, inappropriate user reactions due to slow system response, or other similar threats not...

  2. Dynamic Antenna Alignment Control in Microwave Air-Bridging for Sky-Net Mobile Communication Using Unmanned Flying Platform

    OpenAIRE

    Lin, Chin E.; Ying-Chi Huang

    2015-01-01

    This paper presents a preliminary study on establishing a mobile point-to-point (P2P) microwave air-bridging (MAB) between Unmanned Low Altitude Flying Platform (ULAFP) and backhaul telecommunication network. The proposed Sky-Net system relays telecom signal for general mobile cellphone users via ULAFP when natural disaster sweeps off Base Transceiver Stations (BTSs). Unlike the conventional fix point microwave bridging application, the ULAFP is cruising on a predefined mission flight path to...

  3. Dynamic identification of paradela historic railway bridge

    OpenAIRE

    Ramos, Luís F.; Valente, Isabel; Guimarães, Paulo; Vazquez, Kevin; Lourenço, Paulo B.

    2013-01-01

    Paradela Bridge is a metallic bridge located along the bank of the Tua River in northern Portugal. While the bridge is not currently in service, its structure is representative of many metallic truss structures built across the country between the 19th and the 20th century. The construction of the Paradela Bridge was completed in 1886 and served for about 120 years connecting northern Portugal. Tua Line belongs to the Douro area that UNESCO recently declared as world heritage. This work acqui...

  4. Path transformations of first passage bridges

    OpenAIRE

    Bertoin, Jean

    2003-01-01

    We define the first passage bridge from 0 to $\\lambda$ as the Brownian motion on the time interval $[0,1]$ conditioned to first hit $\\lambda$ at time 1. We show that this process may be related to the Brownian bridge, the Bessel bridge or the Brownian excursion via some path transformations, the main one being an extension of Vervaat's transformation. We also propose an extension of these results to certain bridges with cyclically exchangeable increments.

  5. User`s guide to MIDAS

    Energy Technology Data Exchange (ETDEWEB)

    Tisue, S.A.; Williams, N.B.; Huber, C.C. [Argonne National Lab., IL (United States). Decision and Information Sciences Div.; Chun, K.C. [Argonne National Lab., IL (United States). Environmental Assessment Div.

    1995-12-01

    Welcome to the MIDAS User`s Guide. This document describes the goals of the Munitions Items Disposition Action System (MIDAS) program and documents the MIDAS software. The main text first describes the equipment and software you need to run MIDAS and tells how to install and start it. It lists the contents of the database and explains how it is organized. Finally, it tells how to perform various functions, such as locating, entering, viewing, deleting, changing, transferring, and printing both textual and graphical data. Images of the actual computer screens accompany these explanations and guidelines. Appendix A contains a glossary of names for the various abbreviations, codes, and chemicals; Appendix B is a list of modem names; Appendix C provides a database dictionary and rules for entering data; and Appendix D describes procedures for troubleshooting problems associated with connecting to the MIDAS server and using MIDAS.

  6. A Bridge Too Far

    Science.gov (United States)

    Halprin, L.

    Manned space flight has stagnated for over forty years. No humans have travelled beyond LEO since 1972. This paper examines the historical reasons for this situation, postulates a possible explanation and proposes a potential way forward. The science required for manned space flight has existed for a very long time. The Chinese first developed rockets almost a millennium ago. The Laws of Universal Gravitation were described by Newton in the 17th century, and the rocket equation was formulated by Tsiolkovsky over a hundred years ago. Advances in chemical, electronic and materials technologies enabled manned space flight fifty years ago. But it still required the political will to authorise the enormous expense of the undertaking. Since the original political impetus for manned space flight evaporated after men reached the moon, the enterprise has stagnated. A three stage model linking (a) the science and technology, (b) the economic resources and (c) the will or motivation is presented as a possible explanation. A way for progressing the enterprise of manned space flight beyond this three-way nexus is proposed. By accepting the propositions put forward in this paper, it is plausible that stakeholders may be empowered to push beyond the excuses that have retarded manned space flight for so long.

  7. 47 CFR 80.331 - Bridge-to-bridge communication procedure.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Bridge-to-bridge communication procedure. 80..., Alarm, Urgency and Safety Procedures § 80.331 Bridge-to-bridge communication procedure. (a) Vessels... position). I plan to (give proposed course of action). Over. (3) (Coast station), this is (vessel's...

  8. Bridge spectra of iterated torus knots

    OpenAIRE

    Zupan, Alexander

    2013-01-01

    We determine the set of all genus g bridge numbers of many iterated torus knots, listing these numbers in a sequence called the bridge spectrum. In addition, we prove a structural lemma about the decomposition of a strongly irreducible bridge surface induced by cutting along a collection of essential surfaces.

  9. Two bridges with composite prestressed tension chord

    OpenAIRE

    Muttoni, Aurelio

    2002-01-01

    the bridges over the river Capriasca (1996) and over the river Ticino (1997) are characterised by the application of an innovative structural system. The central part of the main span of both bridges is constituted by the bridge concrete deck with two longitudinal stiffening girders, constituted by polygonal steel members that contain two prestressing tendons each.

  10. Stabilizer for seismically exposed bridge cranes

    International Nuclear Information System (INIS)

    The invention concerns a stabilizer for seismically exposed bridge cranes in reactor buildings. The trolley and the crane bridge are fitted with the stabilizer consisting of a bipartite safety catch which is connected with a joint and able to take up the vertical loads during an earthquake. This stabilizer is suitable for all kinds of bridge cranes operated in seismically active regions

  11. Remediation: Higher Education's Bridge to Nowhere

    Science.gov (United States)

    Complete College America, 2012

    2012-01-01

    The intentions were noble. It was hoped that remediation programs would be an academic bridge from poor high school preparation to college readiness. Sadly, remediation has become instead higher education's "Bridge to Nowhere." This broken remedial bridge is travelled by some 1.7 million beginning students each year, most of whom will…

  12. The administration of road user taxes in developing countries

    OpenAIRE

    Roy W. Bahl

    1992-01-01

    After studying the problems of administering road user taxes in 19 developing countries, the author reports the following, among other things. There is no single, correct structure for road user taxation since the various charges may play different roles in different national revenue systems. All effective tax administration requires a solid, uncomplicated tax structure. The substantial revenue potential of road user taxation rests on a growing tax base. Despite this, road user taxation remai...

  13. User education in university libraries : what, why and how?

    OpenAIRE

    Sewa, Singh

    1992-01-01

    Defines user education as any effort formal or informal, which will guide and instruct existing and potential users in the recognition and formulation of their information needs, in the effective and efficient use of information services and the assessment of source materials that can satisfy specific requirements. Explains the needs and objectives of user education. The role of user education in undergraduate, postgraduate, research and faculty level is discussed. The importance of feedback ...

  14. Designing for user engagement

    CERN Document Server

    Geisler, Cheryl

    2013-01-01

    Designing for User Engagement on the Web: 10 Basic Principles is concerned with making user experience engaging. The cascade of social web applications we are now familiar with - blogs, consumer reviews, wikis, and social networking - are all engaging experiences. But engagement is an increasingly common goal in business and productivity environments as well. This book provides a foundation for all those seeking to design engaging user experiences rich in communication and interaction. Combining a handbook on basic principles with case studies, it provides readers with a ric

  15. Game user experience evaluation

    CERN Document Server

    Bernhaupt, Regina

    2015-01-01

    Evaluating interactive systems for their user experience (UX) is a standard approach in industry and research today. This book explores the areas of game design and development and Human Computer Interaction (HCI) as ways to understand the various contributing aspects of the overall gaming experience. Fully updated, extended and revised this book is based upon the original publication Evaluating User Experience in Games, and provides updated methods and approaches ranging from user- orientated methods to game specific approaches. New and emerging methods and areas explored include physiologi

  16. Distributed User Interfaces

    CERN Document Server

    Gallud, Jose A; Penichet, Victor M R

    2011-01-01

    The recent advances in display technologies and mobile devices is having an important effect on the way users interact with all kinds of devices (computers, mobile devices, laptops, tablets, and so on). These are opening up new possibilities for interaction, including the distribution of the UI (User Interface) amongst different devices, and implies that the UI can be split and composed, moved, copied or cloned among devices running the same or different operating systems. These new ways of manipulating the UI are considered under the emerging topic of Distributed User Interfaces (DUIs). DUIs

  17. SMS/GOES WEFAX users guide

    Science.gov (United States)

    1972-01-01

    An attempt is made to provide both the WEFAX user and the APT user with the basic equipments necessary to convert present equipment to the new SMS WEFAX frequency. This conversion is simple and, as in all communication systems, can be accomplished by innumerable approaches. The approach used here assumed commercial purchase of components and integration by the user into his system. This conversion requires no modification to existing equipment and is simply an RF conversion from S-band to the present VHF frequencies.

  18. PEGASUS User's Guide. 5.1c

    Science.gov (United States)

    Suhs, Norman E.; Dietz, William E.; Rogers, Stuart E.; Nash, Steven M.; Onufer, Jeffrey T.

    2000-01-01

    PEGASUS 5.1 is the latest version of the PEGASUS series of mesh interpolation codes. It is a fully three-dimensional code. The main purpose for the development of this latest version was to significantly decrease the number of user inputs required and to allow for easier operation of the code. This guide is to be used with the user's manual for version 4 of PEGASUS. A basic description of methods used in both versions is described in the Version 4 manual. A complete list of all user inputs used in version 5.1 is given in this guide.

  19. User Driven Innovation in the Building Process

    DEFF Research Database (Denmark)

    Christiansson, Per; Sørensen, Kristian Birch; Rødtness, Mette;

    2008-01-01

    Innovation in Construction (VIC) project. One important driving force for change is the opportunity for users to develop and articulate real needs concerning for example different functionalities of a building and its parts, but also on artifacts supporting the actual needs capture and requirements...... to introduction of advanced information and communication technology (ICT). The paper focuses on creative changes of the building process powered by user driven innovation activities. An overview of existing user driven innovation methodologies is given as well experiences from the ongoing Virtual...... formulation during building design. A general methodological framework and meta ontology for Virtual Innovation in Construction is presented as well as findings from implementation of the method....

  20. User-Centred BCI Videogame Design

    OpenAIRE

    Loup-Escande, Emilie; Lotte, Fabien; LOUP, Guillaume; Lécuyer, Anatole

    2015-01-01

    This chapter aims to offer a user-centred methodological framework to guide the design and evaluation of Brain-Computer Interface videogames. This framework is based on the contributions of ergonomics to ensure these games are well suited for their users (i.e., players). It provides methods, criteria and metrics to complete the different phases required by ae human-centred design process. This aims to understand the context of use, specify the user needs and evaluate the solutions in order to...

  1. Importance of Requirement Management : A Requirement Engineering Concern

    OpenAIRE

    Dhirendra Pandey; Vandana Pandey

    2012-01-01

    Requirement engineering is first phase of software development processes and it is most important phase for every software development model. In requirement engineering phase we can gather the requirements from user and use this requirement to software development and produce software product that satisfy the user needs. In this research paper we describe the fundamental description of requirement engineering and present the basics dimensions of requirement engineering. Also, in this research...

  2. Comprehensive Real-Time Bridge Health Monitoring System of Tongtai Bridge

    OpenAIRE

    Lei Su-su; Gao Yong-tao; Pan Dan-guang

    2015-01-01

    Tongtai Bridge is the world’s largest suspension curve-girder-skew-arch bridge, which is located in Zhangjiakou, China. The understanding of mechanics characteristics is limited to such complex bridges, so it is necessary to establish reliable health monitoring system to investigate the static and dynamic responses and monitor the safety of the bridge. A comprehensive real-time bridge health monitoring system is establish, which includes four aspects: sensor system, data acquisition and trans...

  3. User's guide to the biosphere code BIOMOD

    International Nuclear Information System (INIS)

    BIOMOD has been designed to interface with SYVAC, the function of which is to perform generic risk assessments on hypothetical repository-geosphere-biosphere combinations. The user's guide contains the detailed specifications for the models used, a description of the interim user-interface, a specification for required input and definition of output. Sources of error are indicated and reference is made to the database description and other documents issued relating to BIOMOD. (author)

  4. An Investigation of Online Homework: Required or Not Required?

    Science.gov (United States)

    Wooten, Tommy; Dillard-Eggers, Jane

    2013-01-01

    In our research we investigate the use of online homework in principles of accounting classes where some classes required online homework while other classes did not. Users of online homework, compared to nonusers, had a higher grade point average and earned a higher grade in class. On average, both required and not-required users rated the online…

  5. Exploring the role of intermediary organizations in firm and user community collaborations: Resolving or multiplying paradoxes?

    DEFF Research Database (Denmark)

    Dragsdahl Lauritzen, Ghita

    2015-01-01

    Research on user innovation shows that innovation can be impeded by the conflicting demands that arise in the context of collaborations between firms and their user communities. One stream of research, however, applies a paradox lens to argue that intermediary organizations can help to resolve...... these conflicts, by bridging the opposing logics in which they originate. On the basis of an embedded case study, this article suggests that instead of resolving a paradox of innovation, intermediaries create new paradoxical tensions. Further, I argue that mediating firm-community collaboration is not a...... matter of bridging opposing logics, but of managing new forms of membership uncertainty....

  6. Theory of water and charged liquid bridges.

    Science.gov (United States)

    Morawetz, K

    2012-08-01

    The phenomenon of liquid bridge formation due to an applied electric field is investigated. A solution of a charged catenary is presented, which allows one to determine the static and dynamical stability conditions where charged liquid bridges are possible. The creeping height, the bridge radius and length, as well as the shape of the bridge are calculated showing an asymmetric profile, in agreement with observations. The flow profile is calculated from the Navier-Stokes equation leading to a mean velocity, which combines charge transport with neutral mass flow and which describes recent experiments on water bridges. PMID:23005849

  7. New Concept for Durable Concrete Bridges

    OpenAIRE

    Damek, Marek

    2015-01-01

    This master’s thesis covers the design of a post-tensioned concrete bridge in Trondheim municipality in Norway, in collaboration with Statens vegvesen (SVV). The concept of the bridge is inspired by Egg-Graben-Brücke in Austria, which was designed and built without steel reinforcement in the bridge deck. The idea is to eliminate steel reinforcement which can corrode in the bridge deck. The total length of the bridge is 73 meters and it is divided into 3 spans. The crosssection ...

  8. Bevalac user's handbook

    International Nuclear Information System (INIS)

    This report is a users manual on the Bevalac accelerator facility. This paper discuses: general information; the Bevalac and its operation; major facilities and experimental areas; and experimental equipment

  9. International user studies

    DEFF Research Database (Denmark)

    Nielsen, Lene; Madsen, Sabine; Jensen, Iben;

    countries/regions they operate in. Instead, they focus on a few strategic markets. International user studies tend to be large-scale studies that involve the effort of many both internal and external/local human resources. The studies typically cover 2-4 countries/regions and many end users in each country......, so far, no best practice for incorporating both national cultural differences and cross-cultural similarities into persona descriptions, segmentations, etc. has been found. Based on the empirical findings, we outline a maturity model. The empirical maturity model consists of two separate dimensions...... end users across nationalities and (2) that it often is more important to focus on and take differences in market conditions into account than national culture per se. Companies are in the process of finding out how best to present the insights about international end users to their employees. However...

  10. SEVERO code - user's manual

    International Nuclear Information System (INIS)

    This user's manual contains all the necessary information concerning the use of SEVERO code. This computer code is related to the statistics of extremes = extreme winds, extreme precipitation and flooding hazard risk analysis. (A.C.A.S.)

  11. User Interface History

    DEFF Research Database (Denmark)

    Jørgensen, Anker Helms; Myers, Brad A

    2008-01-01

    User Interfaces have been around as long as computers have existed, even well before the field of Human-Computer Interaction was established. Over the years, some papers on the history of Human-Computer Interaction and User Interfaces have appeared, primarily focusing on the graphical interface era...... and early visionaries such as Bush, Engelbart and Kay. With the User Interface being a decisive factor in the proliferation of computers in society and since it has become a cultural phenomenon, it is time to paint a more comprehensive picture of its history. This SIG will investigate the possibilities...... of  launching a concerted effort towards creating a History of User Interfaces. ...

  12. AN ACD DIAGRAM DEVELOPED FOR SIMULATING A BRIDGE CONSTRUCTION OPERATION

    Directory of Open Access Journals (Sweden)

    Fahimeh Zaeri

    2014-12-01

    Full Text Available Success in the performance of construction projects can be substantially enhanced if plans are formulated more realistically, ahead of time. Planning includes identifying project activities, required resources, interdependencies, and also recognizing the uncertainties in the duration of activities. Inherent features of construction projects, such as high repetition, complexity and uniqueness on the one hand, and advances in technology and methodologies on the other, create more difficulties in planning construction delivery. This is true for bridge operations. This study presents an innovative incremental beam launching method with twin truss gantry. This construction method has significant advantages in terms of cost and speed of performance, but increases the level of planning and management required for the bridge operation. Further, because of the newness of the method, no specific Work Breakdown Structure nor conceptual framework has been developed as yet. The aim of the current study is to explore the use of a simulation-based tool (EZStrobe to facilitate the planning and management of a bridge construction operation (case study. The process followed in the development of a conceptual framework for the case study project is described. An Activity Cycle Diagram is produced alongside the conceptual framework and process models, with the intent of illustrating the key steps in the simulation modelling method. The developed models could assist in scheduling and controlling inherent construction features such as uncertainties, complexities, and repetitions in bridge construction projects, consequently improving their delivery.

  13. User interface design considerations

    DEFF Research Database (Denmark)

    Andersen, Simon Engedal; Jakobsen, Arne; Rasmussen, Bjarne D.

    1999-01-01

    user interface of EESCoolTools these issues led to a series of simulation tools each with a specific purpose and a carefully selected set of input and output variables. To allow a more wide range of questions to be answered by the same model, the user can change between different sets of input and...... have a lot of flexibility in choosing input variables and in assigning values of parameters....

  14. VOLTTRON: User Guide

    Energy Technology Data Exchange (ETDEWEB)

    Lutes, Robert G.; Katipamula, Srinivas; Akyol, Bora A.; Tenney, Nathan D.; Haack, Jereme N.; Monson, Kyle E.; Carpenter, Brandon J.

    2014-04-24

    This document is a user guide for the deployment of the Transactional Network platform and agent/application development within the VOLTTRON. The intent of this user guide is to provide a description of the functionality of the Transactional Network Platform. This document describes how to deploy the platform, including installation, use, guidance, and limitations. It also describes how additional features can be added to enhance its current functionality.

  15. Noise Considerations in Resistance Bridges

    DEFF Research Database (Denmark)

    Diamond, Joseph M.

    1963-01-01

    thermometry, where the noise in the unknown resistor will predominate strongly. An impedance step-up device (transformer or tuned circuit) is valuable in raising the bridge signal and noise level above the noise of the first amplifier tube. However, as the step-up ratio is increased, two counterfactors appear......, namely, noise in the loss resistance of the step-up device, and grid current noise. There is therefore an optimum step-up ratio, which has been found. The step-up device is permitted to have a different temperature from the unknown and standard resistors, to evaluate the advantage of cooling it....... With certain assumptions about the noise and grid current of the first tube it is found that the equivalent temperature of a unity ratio (Mueller) bridge used for liquid helium measurements may be 400°K....

  16. The radiography of Swaythling Bridge

    International Nuclear Information System (INIS)

    The particular application of high energy radiography described in this paper was developed by the Harwell Nondestructive Testing Centre (NDTC) under the sponsorship of Radiation Dynamics Ltd, (RDL) who manufacture the 'Super-X' linear accelerator (Linac) used for the work. An initial evaluation determined the limits for thickness of concrete structures which could be radiographed with the linac under practical conditions. The technique was then applied to carry out a test on a bridge carrying a main trunk road over a small river in an urban environment. A situation which demanded the utmost care in deciding safety parameters and minimal disturbance to the surrounding environment. The safety parameters were defined by the Environmental and Medical Sciences Division of AERE Harwell (EMSc). The test was successfully carried out, within all the control parameters laid down beforehand, and very important engineering data were obtained for the Bridge Engineering Departments of Hampshire County Council and Southampton City Council. (author)

  17. Bridging history and social psychology

    DEFF Research Database (Denmark)

    Glaveanu, Vlad Petre; Yamamoto, Koji

    2012-01-01

    This special issue aims to bridge history and social psychology by bringing together historians and social psychologists in an exercise of reading and learning from each other’s work. This interdisciplinary exercise is not only timely but of great importance for both disciplines. Social psycholog......This special issue aims to bridge history and social psychology by bringing together historians and social psychologists in an exercise of reading and learning from each other’s work. This interdisciplinary exercise is not only timely but of great importance for both disciplines. Social...... psychologists can benefit from engaging with historical sources by being able to contextualise their findings and enrich their theoretical models. It is not only that all social and psychological phenomena have a history but this history is very much part of present-day and future developments. On the other...

  18. Severe ASR damaged concrete bridges

    DEFF Research Database (Denmark)

    Antonio Barbosa, Ricardo; Gustenhoff Hansen, Søren

    2015-01-01

    Technical University of Denmark (DTU) and University of Southern Denmark (SDU) have conducted several full-scale experiments with severe ASR deteriorated bridges. This paper presents few and preliminary results from both the shear tests and the measuring of the material properties. The shear tests...... show that the shear capacity is almost unaffected of ASR despite significant reduction in compressive concrete strength. Furthermore, measurements show a significant tensile reinforcement strain developed due to ASR expansion....

  19. Stability of Axisymmetric Liquid Bridges

    CERN Document Server

    Rubinstein, Boris

    2016-01-01

    We study stability of axisymmetric liquid bridges between two axisymmetric solid bodies in the absence of gravity under arbitrary asymmetric perturbations which are expanded into a set of angular Fourier modes. We determine the stability region boundary for every angular mode in case of both fixed and free contact lines. Application of this approach allows us to demonstrate existence of stable convex nodoid menisci between two spheres.

  20. The Bridge Program - Participant Perspectives

    OpenAIRE

    Rönnqvist, Riitta; Hakonen, Anu; Vartiainen, Matti

    2015-01-01

    The Nokia Bridge Program was established in summer 2011 in order to "make the best of the restructuring: create meaningful opportunities for individuals and local economies impacted by workforce reductions" and to "assist individuals in re-employment". This document reports whether and how the program helped individuals avoid the known negative effects of job loss and find meaningful re-employment. The document also reports how affected employees formed perceptions about Nokia´s fairness and ...

  1. Inspection Strategies for Concrete Bridges

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Thoft-Christensen, Palle

    In this paper an optimal inspection strategy for concrete bridges based on periodic routine and detailed inspections is presented. The failure mode considered is corrosion of the reinforcement due to chlorides. A simple modelling of the corrosion and of the inspection strategy is presented. The...... optimal inspection strategy is determined from an optimization problem, where the design variables are time intervals between detailed inspections and the concrete cover. The strategy is illustrated on a simple structure, namely a reinforced concrete beam....

  2. Adsorption of polymeric brushes: Bridging

    Science.gov (United States)

    Johner, Albert; Joanny, Jean-François

    1992-04-01

    We study the adsorption of grafted polymer layers on a planar surface parallel to the grafting surface. The layer consists of two types of chains: nonadsorbed chains with a free end and adsorbed chains forming bridges between the two plates. In the limit of strong adsorption a dead zone exists in the vicinity of the adsorbing plate; its size increases with the adsorption strength. Two adsorption mechanisms are possible: adsorption of the last monomer only and adsorption of all the monomers. In both cases the adsorption regimes at equilibrium (when no external force acts on the plates) are discussed within the framework of the self-consistent mean-field theory. We also give scaling laws taking into account excluded volume correlations. Finally, we consider situations where a finite external force, either tangential or normal to the plates, is applied on the adsorbing plate. Pulling and tangential forces both reduce the fraction of bridges and eventually lead to rupture, whereas compressional forces favor bridging. For normal forces, force vs distance profiles between planes and crossed cylinders are given.

  3. Halliburton Composite Bridge Plug Assembly

    Energy Technology Data Exchange (ETDEWEB)

    Starbuck, J.M.; Luttrell, C.R.; Aramayo, G.

    2005-01-15

    The overall objectives of this CRADA were to assist Halliburton in analyzing a composite bridge plug and to determine why their original design was failing in the field. In Phase 1, finite element analyses were done on the original composite slip design and several alternative designs. The composite slip was the component in the bridge plug that was failing. The finite element code ABAQUS was used for these calculations and I-DEAS was used as the pre- and post-processor in the analyses. Several different designs and materials were analyzed and recommendations were made towards improving the design. In Phase 2, the objective was to develop finite element models that would accurately represent the deformations in the entire all-composite 4-1/2' diameter bridge plug assembly. The finite element code LS-DYNA was used and the results from this effort were intended to expand Halliburton's composite design and analysis capabilities with regard to developing future composite components for downhole tools. In addition to the finite element modeling, this effort involved the utilization of micromechanics to determine the necessary composite material properties that were needed as input for finite element codes.

  4. Marine data users clustering using data mining technique

    OpenAIRE

    Farnaz Ghiasi; Navid Nezafati; Sajjad Shokohyar

    2015-01-01

    The objective of this research is marine data users clustering using data mining technique. To achieve this objective, marine organizations will enable to know their data and users requirements. In this research, CRISP-DM standard model was used to implement the data mining technique. The required data was extracted from 500 marine data users profile database of Iranian National Institute for Oceanography and Atmospheric Sciences (INIOAS) from 1386 to 1393. The TwoStep algorithm was used fo...

  5. GOCE User Toolbox and Tutorial

    Science.gov (United States)

    Benveniste, Jérôme; Knudsen, Per

    2016-07-01

    The GOCE User Toolbox GUT is a compilation of tools for the utilisation and analysis of GOCE Level 2 products. GUT support applications in Geodesy, Oceanography and Solid Earth Physics. The GUT Tutorial provides information and guidance in how to use the toolbox for a variety of applications. GUT consists of a series of advanced computer routines that carry out the required computations. It may be used on Windows PCs, UNIX/Linux Workstations, and Mac. The toolbox is supported by The GUT Algorithm Description and User Guide and The GUT Install Guide. A set of a-priori data and models are made available as well. Without any doubt the development of the GOCE user toolbox have played a major role in paving the way to successful use of the GOCE data for oceanography. The GUT version 2.2 was released in April 2014 and beside some bug-fixes it adds the capability for the computation of Simple Bouguer Anomaly (Solid-Earth). During this fall a new GUT version 3 has been released. GUTv3 was further developed through a collaborative effort where the scientific communities participate aiming on an implementation of remaining functionalities facilitating a wider span of research in the fields of Geodesy, Oceanography and Solid earth studies. Accordingly, the GUT version 3 has: - An attractive and easy to use Graphic User Interface (GUI) for the toolbox, - Enhance the toolbox with some further software functionalities such as to facilitate the use of gradients, anisotropic diffusive filtering and computation of Bouguer and isostatic gravity anomalies. - An associated GUT VCM tool for analyzing the GOCE variance covariance matrices.

  6. GOCE User Toolbox and Tutorial

    Science.gov (United States)

    Knudsen, Per; Benveniste, Jerome; Team Gut

    2016-04-01

    The GOCE User Toolbox GUT is a compilation of tools for the utilisation and analysis of GOCE Level 2 products.
GUT support applications in Geodesy, Oceanography and Solid Earth Physics. The GUT Tutorial provides information
and guidance in how to use the toolbox for a variety of applications. GUT consists of a series of advanced
computer routines that carry out the required computations. It may be used on Windows PCs, UNIX/Linux Workstations,
and Mac. The toolbox is supported by The GUT Algorithm Description and User Guide and The GUT
Install Guide. A set of a-priori data and models are made available as well. Without any doubt the development
of the GOCE user toolbox have played a major role in paving the way to successful use of the GOCE data for
oceanography. The GUT version 2.2 was released in April 2014 and beside some bug-fixes it adds the capability for the computation of Simple Bouguer Anomaly (Solid-Earth). During this fall a new GUT version 3 has been released. GUTv3 was further developed through a collaborative effort where the scientific communities participate aiming
on an implementation of remaining functionalities facilitating a wider span of research in the fields of Geodesy,
Oceanography and Solid earth studies.
Accordingly, the GUT version 3 has:
 - An attractive and easy to use Graphic User Interface (GUI) for the toolbox,
 - Enhance the toolbox with some further software functionalities such as to facilitate the use of gradients,
anisotropic diffusive filtering and computation of Bouguer and isostatic gravity anomalies.
 - An associated GUT VCM tool for analyzing the GOCE variance covariance matrices.

  7. The Development of a PdCr Integral Weldable Strain Measurement System Based on NASA Lewis PdCr/Pt Strain Sensor for User-Friendly Elevated Temperature Strain Measurements

    Science.gov (United States)

    Wnuk, S. P., Jr.; Wnuk, V. P.

    1997-01-01

    This report describes the development of a user friendly weldable strain gage employing the NASA Lewis PdCr/Pt wire strain sensor. The NASA sensors are pre-attached to Hastelloy X or Titanium alloy shims using name spray techniques developed under previous NASA programs. The weldable sensors are then pre-stabilized for 50 hours at 780 C in air. A weldable terminal and high temperature cable is then connected to the sensor and the assembly is pre-calibrated over the full test temperature range. Calibrated resistors are inserted into a bridge completion module at the cool end of the cable to condition the sensor in half or full bridge configuration. The sensor is attached to the structure using a common capacitive discharge spot welder. No additional high temperature stabilization or calibration is required. The resultant device is a pre-calibrated strain transducer which can be plugged into any common variety strain instrumentation.

  8. Engineering approach to in-situ bridge health monitoring with fiber bragg gratings

    Institute of Scientific and Technical Information of China (English)

    WU Zhan-jun; ZHANG Bo-ming; WAN Li-bing; ZHOU Zhi; OU Jin-ping

    2006-01-01

    In this presentation the feasibility and capability of fiber Bragg gratings (FBG) employed in bridge health monitoring are demonstrated on a real bridge. FBG's wavelength shift depending on strain variance has been tested. The technique of FBG installation on bridges has been developed. 12 FBG strain sensors and 3temperature sensors have been successfully embedded in the prestressed concrete box girder during the construction of Heilongjiang Hulan River Bridge. The prestressing tension process and quasi-static loading process of the girder were monitored with those sensors before it was installed onto the bridge. After the bridge was completed,the FBG sensors embedded have been utilized to monitor the strain shift of the beam under quasi-static load,traffic load and temperature. The results show that the traffic fluxes, possible fatigue damage and deflection of the bridge can be revealed conveniently through strain measurements with these FBG sensors, which provide key information for structural health diagnosis. The fact that the FBG strain sensors have withstood the ordeal of harsh construction process and lasted for more than one year proves that their durability and stability can satisfy the requirements for bridge health monitoring. It is also shown that the FBG strain sensor is more adaptive to long-term structural health monitoring than the electric resistance strain gauge.

  9. A Formalization of the End User Service Development Approach

    Directory of Open Access Journals (Sweden)

    Meriem Benhaddi

    2013-01-01

    Full Text Available The end user service development known as the user-centric SOA emerged as a new approach that allows giving the end user the ability to create on the fly his own applications that meet a situational need. In fact, the classical SOA was designed for developers and is characterized by a heavy technical stack which is out of reach of end users. Lightweight Web 2.0 technologies such as Mashup appeared to bridge this gap and provide a new agile and quick way to compose and integrate different resources in a dynamic and on the fly manner. However, Mashups are emerging applications, and thus consist of immature, non intuitive and non formalized area. In this paper, we formalize the user-centric SOA development by proposing a new cloud-based architecture for user-centric SOA platforms, and by introducing a new rich integration language based on the advanced Enterprise Integration Patterns (EIPS. We also propose a new intuitive and self-explanatory semantic process for end users services integration.

  10. Research on Bayesian Network Based User's Interest Model

    Institute of Scientific and Technical Information of China (English)

    ZHANG Weifeng; XU Baowen; CUI Zifeng; XU Lei

    2007-01-01

    It has very realistic significance for improving the quality of users' accessing information to filter and selectively retrieve the large number of information on the Internet. On the basis of analyzing the existing users' interest models and some basic questions of users' interest (representation, derivation and identification of users' interest), a Bayesian network based users' interest model is given. In this model, the users' interest reduction algorithm based on Markov Blanket model is used to reduce the interest noise, and then users' interested and not interested documents are used to train the Bayesian network. Compared to the simple model, this model has the following advantages like small space requirements, simple reasoning method and high recognition rate. The experiment result shows this model can more appropriately reflect the user's interest, and has higher performance and good usability.

  11. 42 CFR 495.210 - Meaningful EHR user attestation.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 5 2010-10-01 2010-10-01 false Meaningful EHR user attestation. 495.210 Section... INCENTIVE PROGRAM Requirements Specific to Medicare Advantage (MA) Organizations § 495.210 Meaningful EHR... EHR user. (b) Qualifying MA organizations are required to attest within 60 days after the close of...

  12. User Guidelines for the Brassica Database: BRAD.

    Science.gov (United States)

    Wang, Xiaobo; Cheng, Feng; Wang, Xiaowu

    2016-01-01

    The genome sequence of Brassica rapa was first released in 2011. Since then, further Brassica genomes have been sequenced or are undergoing sequencing. It is therefore necessary to develop tools that help users to mine information from genomic data efficiently. This will greatly aid scientific exploration and breeding application, especially for those with low levels of bioinformatic training. Therefore, the Brassica database (BRAD) was built to collect, integrate, illustrate, and visualize Brassica genomic datasets. BRAD provides useful searching and data mining tools, and facilitates the search of gene annotation datasets, syntenic or non-syntenic orthologs, and flanking regions of functional genomic elements. It also includes genome-analysis tools such as BLAST and GBrowse. One of the important aims of BRAD is to build a bridge between Brassica crop genomes with the genome of the model species Arabidopsis thaliana, thus transferring the bulk of A. thaliana gene study information for use with newly sequenced Brassica crops. PMID:26519408

  13. Predicting user click behaviour in search engine advertisements

    Science.gov (United States)

    Daryaie Zanjani, Mohammad; Khadivi, Shahram

    2015-10-01

    According to the specific requirements and interests of users, search engines select and display advertisements that match user needs and have higher probability of attracting users' attention based on their previous search history. New objects such as user, advertisement or query cause a deterioration of precision in targeted advertising due to their lack of history. This article surveys this challenge. In the case of new objects, we first extract similar observed objects to the new object and then we use their history as the history of new object. Similarity between objects is measured based on correlation, which is a relation between user and advertisement when the advertisement is displayed to the user. This method is used for all objects, so it has helped us to accurately select relevant advertisements for users' queries. In our proposed model, we assume that similar users behave in a similar manner. We find that users with few queries are similar to new users. We will show that correlation between users and advertisements' keywords is high. Thus, users who pay attention to advertisements' keywords, click similar advertisements. In addition, users who pay attention to specific brand names might have similar behaviours too.

  14. Engaging with users

    DEFF Research Database (Denmark)

    Riisberg, Vibeke; Bang, Anne Louise

    to change the education of future designers. This is an emerging field at a number of design schools across the world, among these Design School Kolding in Denmark. In this paper we discuss ways in which we as design educators can teach fashion and textile students ways to engage with users during...... the creative process. To a large degree it is not common to engage direct with users in fashion and textile design. However, we see an increasing interest in this subject among the design students and also in recent research within fashion and textiles. We therefore argue that there is a need for...... direct contact with the biggest sense organ – our skin. Thus, the aim of our research is to develop new dialogue tools for teaching fashion and textile students in order to stimulate new ways of thinking and engaging with users. By developing and employing participatory design methods in the field of...

  15. GRSAC Users Manual

    Energy Technology Data Exchange (ETDEWEB)

    Ball, S.J.; Nypaver, D.J.

    1999-02-01

    An interactive workstation-based simulation code (GRSAC) for studying postulated severe accidents in gas-cooled reactors has been developed to accommodate user-generated input with ''smart front-end'' checking. Code features includes on- and off-line plotting, on-line help and documentation, and an automated sensitivity study option. The code and its predecessors have been validated using comparisons with a variety of experimental data and similar codes. GRSAC model features include a three-dimensional representation of the core thermal hydraulics, and optional ATWS (anticipated transients without scram) capabilities. The user manual includes a detailed description of the code features, and includes four case studies which guide the user through four different examples of the major uses of GRSAC: an accident case; an initial conditions setup and run; a sensitivity study; and the setup of a new reactor model.

  16. GRSAC Users Manual

    International Nuclear Information System (INIS)

    An interactive workstation-based simulation code (GRSAC) for studying postulated severe accidents in gas-cooled reactors has been developed to accommodate user-generated input with ''smart front-end'' checking. Code features includes on- and off-line plotting, on-line help and documentation, and an automated sensitivity study option. The code and its predecessors have been validated using comparisons with a variety of experimental data and similar codes. GRSAC model features include a three-dimensional representation of the core thermal hydraulics, and optional ATWS (anticipated transients without scram) capabilities. The user manual includes a detailed description of the code features, and includes four case studies which guide the user through four different examples of the major uses of GRSAC: an accident case; an initial conditions setup and run; a sensitivity study; and the setup of a new reactor model

  17. Evaluating User Participation and User Influence in an Enterprise System

    Science.gov (United States)

    Gibbs, Martin D.

    2010-01-01

    Does user influence have an impact on the data quality of an information systems development project? What decision making should users have? How can users effectively be engaged in the process? What is success? User participation is considered to be a critical success factor for Enterprise Resource Planning (ERP) projects, yet there is little…

  18. From Peers to the Cloud: Utilizing Distributed Resources for Content Delivery and User Collaboration

    OpenAIRE

    Wang, Haiyang

    2013-01-01

    In this thesis, we tackle the problem of content delivery and user collaboration with emerging Internet technologies. Our investigation starts from peer-to-peer (P2P) sharing with social relations to contemporary cloud computing with flexible resource provisioning. We seek to leverage distributed resources for efficient sharing and collaboration, which leads to a hybrid system design that seamlessly bridges users' local resources to public datacenters. We first explore social-network-based op...

  19. HANARO user support

    International Nuclear Information System (INIS)

    The purpose of this project is to support external user for the promotion of HANARO common utilization effectively. To do this, external manpower was recruited and trained. Also, in order to find out and cultivate HANARO user, practice-oriented education was done. The total number of project selected as the promotion of HANARO common utilization was 31 in this year. These composed of four fields such as neutron beam utilization, materials/nuclear materials irradiation test, neutron activation analysis and radioisotope production. In each field, the numbers of project were 17, 7, 4 and 3 respectively. At first, from a selected project of view, supporting ratio by external manpower was reached to the 58%, that is, 18 out of 31 project was supported. In each field, it was 82% for neutron beam utilization and 100% for neutron activation analysis. Also, from the utilization time point of view, supporting ratio of external manpower was reached to 30% for neutron beam utilization and 59% for neutron activation analysis. Otherwise, supporting ratio by manpower in KAERI was reached to 97%, that is, 30 out of 31 project was supported. Also, from the utilization time point of view, total supporting ratio was reached to 15%. In each field, it was 20% for neutron beam utilization, 18% for materials/nuclear materials irradiation test, 20% for neutron activation analysis and 6% for radioisotope production. In order to contribute finding and cultivating of HANARO potential user and increase utilization ratio of HANARO experimental facility, practice-oriented HANARO user education has been done. At first, 32 participants from industries, universities, institutes were educated and practiced on HRPD/SANS instrument in the field of neutron beam utilization. Otherwise, in order to support external user effectively, external manpower were trained. Also, more effective support for external user could be possible through the grasping difficulty and problem on the performance of project

  20. D0 Silicon Upgrade: End Calorimeter Transfer Bridge Modification

    International Nuclear Information System (INIS)

    During the assembly of major components into the D0 Detector, a transfer bridge was required to move the North-End Calorimeter from the clean room,over the cable bridge and onto the north sidewalk of the assembly hall. This experiment is now at the beginning stages of the next phase, namely the upgrade of this Detector for future physics research. A major piece of this upgrade is the installation of a solenoid magnet into the Central Calorimeter. In order to accomplish this, the South End Calorimeter has to be removed from the detector and the North End Calorimeter must be moved an additional 20-inch from its nominal open position (total 60-inch movement). The South End Calorimeter will be removed from the detector using the equipment designed for its installation. The calorimeter will be staged on the south sidewalk during the installation of the solenoid magnet and the central tracking systems. The North End Calorimeter is moved 60-inch to give more space between calorimeters during magnet, tracker and cable installation work. This movement will allow the calorimeter to remain coupled to the cryo system. However, this movement requires an extension be added to the center beam. This extension will support the rear wheels of the calorimeter and in the case of the end calorimeters, carry the majority of the weight. The extension is to be a modification of the transfer bridge. This modification, basically has T1 steel blocks added to one end and legs to the sidewalk supports at the other. The T1 steel blocks are notched to fit into the center beam porches and are welded to bridge rails. This design is the same as that for the installation bridge (3740.312-ME-273456), including the welds and weld procedures which are identical in both cases. Since load testing is impractical, the critical welds will be non-destructive tested by ultrasonic means. The laboratory, through the FESS Department, has a contract with M.Q.S. Inspection Inc. The results of this testing will be

  1. School library user studies

    Directory of Open Access Journals (Sweden)

    Zdenka Verlič

    2002-01-01

    Full Text Available The analysis of the results of a questionnaire answered by Slovene primary and secondary school librarians is presented in the article. The purpose of the study was to determine if library user studies were being performed in our school libraries. It was confirmed that more studies had been conducted by school librarians with a completed higher level of education, by librarians with adequate (library and information sciences education and also by the librarians participating in life-long learning in their professional field than by other librarians. An important factor influencing increased user studies was also librarians’ membership in the Slovene librarian professional organization.

  2. User friendly packaging

    DEFF Research Database (Denmark)

    Geert Jensen, Birgitte

    2010-01-01

    User-friendly Packaging” aims to create a platform for developing more user-friendly packaging. One intended outcome of the project is a guideline that industry can use in development efforts. The project also points the way for more extended collaboration between companies and design researchers. How...... can design research help industry in packaging innovation?......Most consumers have experienced occasional problems with opening packaging. Tomato sauce from the tinned mackerel splattered all over the kitchen counter, the unrelenting pickle jar lid, and the package of sliced ham that cannot be opened without a knife or a pair of scissors. The research project...

  3. EPRINT ARCHIVE USER SURVEY

    CERN Multimedia

    2001-01-01

    University of Southampton invites the CERN community to participate in a survey Professor Stevan Harnad is conducting on current users and non-users of Eprint Archives. http://www.eprints.org/survey/ The findings will be used to suggest potential enhancements of the services as well as to get a deeper understanding of the very rapid developments in the on-line dissemination and use of scientific and scholarly research. (The survey is anonymous. Revealing your identity is optional and it will be kept confidential.)

  4. UIL -User Interface Language

    CERN Document Server

    Lewis, J; CERN. Geneva

    1990-01-01

    Some widget examples, widget categories, the push button widget, menus, the FORM widget, using UIL for an application program, the MOTIF Resource Manager (MRM), execution thread of an application using UIL and MRM, opening hierarchies, binding UIL names to application addresses, fetching widget hierarchies and managing them, changing widget resources using UIL and MRM, fetching literal values from the UID file. Introduction to the User Interface Language, defining a user interface, advantages of using UIL, accessing UID files from the application, UIL Syntax, the UIL module structure, defining a widget instance hierarchy, declaration of literals colors, icons, fonts

  5. User Centered Design

    DEFF Research Database (Denmark)

    Egbert, Maria; Matthews, Ben

    The interdisciplinary approach of User Centered Design is presented here with a focus on innovation in the design and use of hearing technologies as well as on the potential of innovation in interaction. This approach is geared towards developing new products, systems, technologies and practices...... based on an understanding of why so few persons with hearing loss use the highly advanced hearing technologies. In integrating Conversation Analysis (“CA”), audiology and User Centered Design, three disciplines which are collaborating together for the first time, we are addressing the following...

  6. RADTRAN 5 user guide.

    Energy Technology Data Exchange (ETDEWEB)

    Kanipe, Frances L.; Neuhauser, Karen Sieglinde

    2003-07-01

    This User Guide for the RADTRAN 5 computer code for transportation risk analysis describes basic risk concepts and provides the user with step-by-step directions for creating input files by means of either the RADDOG input file generator software or a text editor. It also contains information on how to interpret RADTRAN 5 output, how to obtain and use several types of important input data, and how to select appropriate analysis methods. Appendices include a glossary of terms, a listing of error messages, data-plotting information, images of RADDOG screens, and a table of all data in the internal radionuclide library.

  7. Myocardial Bridging: An Up-to-Date Review.

    Science.gov (United States)

    Lee, Michael S; Chen, Cheng-Han

    2015-11-01

    Myocardial bridging is a congenital anomaly in which a segment of a coronary artery takes a "tunneled" intramuscular course under a "bridge" of overlying myocardium. This causes vessel compression in systole, resulting in hemodynamic changes that may be associated with angina, myocardial ischemia, acute coronary syndrome, left ventricular dysfunction, arrhythmias, and even sudden cardiac death. While described on autopsy for centuries, technological advances such as coronary computed tomography angiography and intravascular ultrasound have contributed greatly to our understanding of the anatomic, hemodynamic, and pathophysiological consequences of systolic compression. Atherosclerosis preferentially develops immediately proximal to the bridged segment, likely due to alterations in shear stress, while the compressed segment itself is often spared. First-line therapy of symptomatic bridging remains medical treatment with beta-blockers and non-dihydropyridine calcium-channel blockers, and nitrates are contraindicated. Surgical myotomy, intracoronary stenting, and coronary artery bypass graft surgery have been used for refractory symptoms, but long-term outcomes remain uncertain. Further research is required to better define the patient population that would derive the greatest benefit from surgical and percutaneous intervention. PMID:25999138

  8. Design of unballasted track bridges on Beijing--Tianjin intercity railway%Design of unballasted track bridges on Beijing--Tianjin intercity railway

    Institute of Scientific and Technical Information of China (English)

    Sun Shuli; Zhang Wenjian; Wang Zhaohu; Su Wei; Wu Cailan; Bu Qinghao

    2011-01-01

    Beijing--Tianjin intercity railway is the first newly-built passenger dedicated line with operating speed of 350 km/h in our country. During design, new ideas of bridge construction were carried out to ensure the requirements of safety, comfort and stability of the train under high-speed condition. At the same time, concepts of environmental adaptability, service to transportation and comprehensive benefits were observed. On the whole line, long-bridge schemes were adopted and the most advanced technologies of unballasted track were utilized on bridges, the length of which accounts for 87.7 % of the total line. The success of design and construction of the bridges on this rail has accu- mulated valuable experience for high-speed railway construction on a large scale in the future, and made it a marking, demonstrating, and model project to follow.

  9. Spectrometer user interface to computer systems

    International Nuclear Information System (INIS)

    A computer system for use in radiation spectrometry should be designed around the needs and comprehension of the user and his operating environment. To this end, the functions of the system should be built in a modular and independent fashion such that they can be joined to the back end of an appropriate user interface. The point that this interface should be designed rather than just allowed to evolve is illustrated by reference to four related computer systems of differing complexity and function. The physical user interfaces in all cases are keyboard terminals, and the virtues and otherwise of these devices are discussed and compared with others. The language interface needs to satisfy a number of requirements, often conflicting. Among these, simplicity and speed of operation compete with flexibility and scope. Both experienced and novice users need to be considered, and any individual's needs may vary from naive to complex. To be efficient and resilient, the implementation must use an operating system, but the user needs to be protected from its complex and unfamiliar syntax. At the same time the interface must allow the user access to all services appropriate to his needs. The user must also receive an image of privacy in a multi-user system. The interface itself must be stable and exhibit continuity between implementations. Some of these conflicting needs have been overcome by the SABRE interface with languages operating at several levels. The foundation is a simple semimnemonic command language that activates indididual and independent functions. The commands can be used with positional parameters or in an interactive dialogue the precise nature of which depends upon the operating environment and the user's experience. A command procedure or macrolanguage allows combinations of commands with conditional branching and arithmetic features. Thus complex but repetitive operations are easily performed

  10. A Novel Approach for Ranking Images Using User and Content Tags

    Directory of Open Access Journals (Sweden)

    Arif Ur Rahman

    2015-12-01

    Full Text Available In this study, a tag and content-based ranking algorithm is proposed for image retrieval that uses the metadata of images as well as the visual features of images, also known as “visual words” to retrieve more relevant images. Thus, making the retrieval process more accurate than the keyword-based retrieval approaches. Both tag and content-based image retrieval techniques have their own advantages and disadvantages. By combining the two, their disadvantages have been offset. The proposed system has been developed to bridge the gap between the existing techniques and the desired user requirements. Initially, the system extracts the metadata of images and stores them into a custom designed dictionary dataset. Then, the system creates a visual vocabulary and trains a classifier on a dataset of images belonging to different categories. Next, for any given user-query, the system makes a decision to display a class of images that best matches the query. These class images are processed in a way that we compute the relevance scores for each image and display the result based on the score.

  11. International Contribution to the Highway Agency's Bridge Related Research

    OpenAIRE

    Nowak, A. S.; Thoft-Christensen, Palle

    2000-01-01

    The objective of this paper is to summarize recent contributions of international experts to the research program sponsored by the Highways Agency. An efficient management of existing bridges requires methodology for an accurate evaluation of the actual loads and load carrying capacity and prediction of the remaining life. However, the parameters, which are involved in the evaluation process, are random variable. Therefore, a considerable research effort has been directed at the development o...

  12. Combination of nondestructive evaluations for reliable assessment of bridge deck

    OpenAIRE

    Khalim A.R.; Sagar D.; Kumruzzaman M.D.; Hasan A.S.M.Z.

    2011-01-01

    Non-destructive evaluation (NDE) has offered unprecedented utilize for bridge management body to monitor structural health. None of these evaluation methods can provide all the damage information (damage category, quantitative assessment) alone which is required for necessary repair activity and condition rating of structure. In most of the cases, the response of one evaluation method implies the presence of a defect among the multiple defects to which the evaluation method is sensitive. This...

  13. Ontology Requirements Specification

    OpenAIRE

    Suárez-Figueroa, Mari Carmen; A. GÓMEZ-PÉREZ

    2012-01-01

    The goal of the ontology requirements specification activity is to state why the ontology is being built, what its intended uses are, who the end users are, and which requirements the ontology should fulfill. This chapter presents detailed methodological guidelines for specifying ontology requirements efficiently. These guidelines will help ontology engineers to capture ontology requirements and produce the ontology requirements specification document (ORSD). The ORSD will play a key role dur...

  14. A bridge to advanced mathematics

    CERN Document Server

    Sentilles, Dennis

    2011-01-01

    This helpful workbook-style ""bridge"" book introduces students to the foundations of advanced mathematics, spanning the gap between a practically oriented calculus sequence and subsequent courses in algebra and analysis with a more theoretical slant. Part 1 focuses on logic and number systems, providing the most basic tools, examples, and motivation for the manner, method, and concerns of higher mathematics. Part 2 covers sets, relations, functions, infinite sets, and mathematical proofs and reasoning. Author Dennis Sentilles also discusses the history and development of mathematics as well a

  15. Fatigue problems of steel bridges

    Czech Academy of Sciences Publication Activity Database

    Urushadze, Shota; Frýba, Ladislav; Škaloud, Miroslav; Pirner, Miroš; Zörnerová, Marie

    Stirlingshire : Civil-Comp Press, 2012 - (Pombo, J.), s. 142-151 ISBN 978-1-905088-53-9. ISSN 1759-3433. [International Conference on Railway Technology: Research, Development and Maintenance /1./. Las Palmas de Gran Canaria (ES), 18.04.2012-20.04.2012] R&D Projects: GA MŠk(CZ) 7E08098 Grant ostatní: evropská komise(XE) RFSR-CT-2008-00033 (BRIFAG); GA ČR(CZ) GA103/08/1340 Institutional support: RVO:68378297 Keywords : steel bridges * fatigue * S-N curve * orthotropic deck * web breathing Subject RIV: JM - Building Engineering

  16. Nanoclusters a bridge across disciplines

    CERN Document Server

    Jena, Purusottam

    2010-01-01

    This comprehensive book on Nanoclusters comprises sixteen authoritative chapters written by leading researchers in the field. It provides insight into topics that are currently at the cutting edge of cluster science, with the main focus on metal and metal compound systems that are of particular interest in materials science, and also on aspects related to biology and medicine. While there are numerous books on clusters, the focus on clusters as a bridge across disciplines sets this book apart from others. Delivers cutting edge coverage of cluster science Covers a broad range of topics in

  17. Seismic Evaluation of Highway Bridges - Phase 1

    OpenAIRE

    Ramirez, J.A.; Pan, Austin D.; Mwakasisi, Frank Thompson

    1996-01-01

    The primary objective of the study was to establish the guidelines for screening, assessing, and ranking Indiana bridges for seismic upgrade. The outcome of the study is a complete strategy for the detailed structural assessment of Indiana highway bridges subjected to seismic forces. The structural evaluation is conducted using a nonlinear time-history analysis of the bridge for simulated or actual records. The specific soil conditions at the site are accounted in terms of the ground motio...

  18. REPORT: BioMedBridges standards workshop

    OpenAIRE

    Conte, Nathalie; Hancocks, Tom; Suhr, Stephanie

    2014-01-01

    This workshop, co-organized by BioMedBridges WP3 and 12, was held on 24-25 June and hosted by BioMedBridges partners at VUMC in Amsterdam. Attendees included BioMedBridges personnel, members from the ESFRI BMS research infrastructures and invited external experts from existing standards organisations. The following aspects of data standardisation were explored: Defining entity identifiers and identifiers best practice Development of a Meta models and Mappings Registry for bio...

  19. Bridges and wildlife: issues and solutions

    OpenAIRE

    Carey, Marion

    2003-01-01

    The Washington State Department of Transportation (WSDOT) owns over 3,000 steel and concrete bridges, many of which are occupied by wildlife. Species documented occupying bridges range from birds of prey, such as ospreys, peregrines and owls, to mammals such as raccoons, bats and bushy tailed wood rats. While the bridges are playing an important role in providing habitat for wildlife, their presence can also lead to costly project delays. Project Objective The project objective is to develop ...

  20. Markovian Bridges: Weak continuity and pathwise constructions

    OpenAIRE

    Chaumont, Loïc; Uribe Bravo, Gerónimo

    2009-01-01

    A Markovian bridge is a probability measure taken from a disintegration of the law of an initial part of the path of a Markov process given its terminal value. As such, Markovian bridges admit a natural parameterization in terms of the state space of the process. In the context of Feller processes with continuous transition densities, we construct by weak convergence considerations the only versions of Markovian bridges which are weakly continuous with respect to their parameter. We use this ...

  1. Maximal liquid bridges between horizontal cylinders

    OpenAIRE

    Cooray, Himantha; Huppert, Herbert E.; Neufeld, Jerome A

    2016-01-01

    We investigate two-dimensional liquid bridges trapped between pairs of identical horizontal cylinders. The cylinders support forces due to surface tension and hydrostatic pressure which balance the weight of the liquid. The shape of the liquid bridge is determined by analytically solving the nonlinear Laplace-Young equation. Parameters that maximize the trapping capacity (defined as the cross-sectional area of the liquid bridge) are then determined. The results show that these parameters can ...

  2. Bridge engineering handbook construction and maintenance

    CERN Document Server

    Chen, Wai-Fah

    2014-01-01

    Over 140 experts, 14 countries, and 89 chapters are represented in the second edition of the Bridge Engineering Handbook. This extensive collection highlights bridge engineering specimens from around the world, contains detailed information on bridge engineering, and thoroughly explains the concepts and practical applications surrounding the subject.Published in five books: Fundamentals, Superstructure Design, Substructure Design, Seismic Design, and Construction and Maintenance, this new edition provides numerous worked-out examples that give readers step-by-step design procedures, includes c

  3. Life Cycle Assessment of a Norwegian Bridge

    OpenAIRE

    Dequidt, Thomas Charles Edouard

    2012-01-01

    Life cycle assessment (LCA) methodology aims at evaluating the environmental impacts of a product or system from a holistic approach. In this methodology, all life cycle phases of the product are identified and assessed, from the raw material acquisition to the end-of-life phase. This master thesis is dealing with the LCA of a Norwegian bridge. First, a literature review is realized by going through 14 bridge LCA references. Then, a detailed description of bridge LCA methodology ...

  4. Measurement of Deflection Line on Bridges

    Science.gov (United States)

    Urban, Rudolf; Štroner, Martin

    2013-12-01

    Prestressed concrete bridges are very sensitive to the increase in long-term deflections. Reliable forecasts of deflections of bridge structures during construction and durability are crucial for achieving good durability. The main results of measurements are the changes of the deflection line of the bridge structures, which places special demands on the measurement procedure. Results from measurements are very useful for the improvement of mathematical prediction methods of behaviour of long span prestressed concrete structures.

  5. Axisymmetric long liquid bridges stability and resonances

    OpenAIRE

    Meseguer Ruiz, José; Sanz Andres, Angel Pedro; Perales Perales, José Manuel

    1990-01-01

    In this paper mathematical expressions for minimum-volume stability limits and resonance frequencies of axisymmetric long liquid bridges are presented. These expressions are valid for a wide range of liquid bridge configurations, accounting for ef-fects like unequal disks and axial microgravity in the case of minimum-volume stability limits,and unequal disks, axial microgravity,non-zero viscosity and liquid bridge volume different from the cylindrical one in the case of resonance frequenc...

  6. Personal lifelong user model clouds

    DEFF Research Database (Denmark)

    Dolog, Peter; Kay, Judy; Kummerfeld, Bob

    This paper explores an architecture for very long term user modelling, based upon personal user model clouds. These ensure that the individual's applications can access their model whenever it is needed. At the same time, the user can control the use of their user model. So, they can ensure it is...

  7. Spitzer view of massive star formation in the tidally stripped Magellanic Bridge

    Energy Technology Data Exchange (ETDEWEB)

    Chen, C.-H. Rosie; Indebetouw, Remy [Department of Astronomy, University of Virginia, Charlottesville, VA 22904 (United States); Muller, Erik; Kawamura, Akiko [National Astronomical Observatory of Japan, Mitaka, Tokyo 181-8588 (Japan); Gordon, Karl D.; Meixner, Margaret; Seale, Jonathan P.; Shiao, Bernie [Space Telescope Science Institute, Baltimore, MD 21218 (United States); Sewiło, Marta [Department of Physics and Astronomy, Johns Hopkins University, Baltimore, MD 21218 (United States); Whitney, Barbara A.; Meade, Marilyn R. [Department of Astronomy, University of Wisconsin-Madison, Madison, WI 53706 (United States); Fukui, Yasuo [Department of Astrophysics, Nagoya University, Furocho, Chikusaku, Nagoya 464-8602 (Japan); Madden, Suzanne C. [CEA, Laboratoire AIM, Irfu/SAp, Orme des Merisiers, F-91191 Gif-sur-Yvette (France); Oliveira, Joana M.; Van Loon, Jacco Th. [Astrophysics Group, Lennard-Jones Laboratories, Keele University, Keele, Staffordshire ST5 5BG (United Kingdom); Robitaille, Thomas P., E-mail: rchen@mpifr-bonn.mpg.de [Max Planck Institute for Astronomy, D-69117 Heidelberg (Germany)

    2014-04-20

    The Magellanic Bridge is the nearest low-metallicity, tidally stripped environment, offering a unique high-resolution view of physical conditions in merging and forming galaxies. In this paper, we present an analysis of candidate massive young stellar objects (YSOs), i.e., in situ, current massive star formation (MSF) in the Bridge using Spitzer mid-IR and complementary optical and near-IR photometry. While we definitely find YSOs in the Bridge, the most massive are ∼10 M {sub ☉}, <<45 M {sub ☉} found in the LMC. The intensity of MSF in the Bridge also appears to be decreasing, as the most massive YSOs are less massive than those formed in the past. To investigate environmental effects on MSF, we have compared properties of massive YSOs in the Bridge to those in the LMC. First, YSOs in the Bridge are apparently less embedded than in the LMC: 81% of Bridge YSOs show optical counterparts, compared to only 56% of LMC sources with the same range of mass, circumstellar dust mass, and line-of-sight extinction. Circumstellar envelopes are evidently more porous or clumpy in the Bridge's low-metallicity environment. Second, we have used whole samples of YSOs in the LMC and the Bridge to estimate the probability of finding YSOs at a given H I column density, N(H I). We found that the LMC has ∼3 × higher probability than the Bridge for N(H I) >12 × 10{sup 20} cm{sup –2}, but the trend reverses at lower N(H I). Investigating whether this lower efficiency relative to H I is due to less efficient molecular cloud formation or to less efficient cloud collapse, or to both, will require sensitive molecular gas observations.

  8. TO STORES USERS

    CERN Multimedia

    SPL Division

    2001-01-01

    Stores users are informed that the Stores (Central, Emergency window, Raw materials, Chemical products and Prévessin Self service stores) will be closed on Friday, 7 December owing to migration of the Stores computers to Windows 2000. Thank you for your understanding.

  9. IP Simulator User Guide

    OpenAIRE

    Nataf, Emmanuel

    2008-01-01

    This simulator allows to construct IPv4 network topologies with routers and end hosts. The focus of the simulator is on routing table configuration. The simulator could also run user network programs written with a java.net UDP like API.

  10. User Centric Policy Management

    Science.gov (United States)

    Cheek, Gorrell P.

    2013-01-01

    Internet use, in general, and online social networking sites, in particular, are experiencing tremendous growth with hundreds of millions of active users. As a result, there is a tremendous amount of privacy information and content online. Protecting this information is a challenge. Access control policy composition is complex, laborious and…

  11. SALOME. User's guide

    International Nuclear Information System (INIS)

    A user's guide for a least squares fit analysis program is presented, which has been developed for VUV and visible plasma spectroscopy on the Extrap-T1 experiment. The program can be used for line and multiplet identification, multiplet intensity and line width measurements. Atomic data are used extensively to aid the interpretation of the spectra. 7 figs

  12. OASIS User Manual

    CERN Document Server

    Bojtar, L

    2009-01-01

    The OASIS system has been operational for years now. After a long development the project has reached a state where the number of features it provides exceeds largely what most of its users knows about. The author felt it was time to write a user manual explaining all the functionality of the viewer application. This document is a user manual, concentrating on the functionality of the viewer from the user’s point of view. There are already documents available on the project’s web site about the technical aspects at http://project-oasis.web.cern.ch/project-oasis/presentations.htm . There was an attempt to produce a tutorial on the viewer, but it didn’t get much further than the table of contents, that however is well thought. The structure of this user manual follows the same principle, the basic and most often used features are grouped together. Advanced or less often used features are described in a separate chapter. There is a second organizational principle, features belong to different levels: chann...

  13. AELIB user's manual

    International Nuclear Information System (INIS)

    This report is an updatable manual for users of AELIB, the AECL Library of FORTRAN-callable routines for the CRNL CDC 6600/CYBER 170 system. It provides general advice on the use of this library and detailed information on the selection and usage of particular library routines

  14. SEDAP - user manual

    International Nuclear Information System (INIS)

    SEDAP (System for Experimental Data Processing) provides the scientist with a powerful tool to process various digital data which are sampled during an experiment. SEDAP is a software package based upon FORTRAN 77. The SEDAP-Manual contains all informations that are necessary for the application of SEDAP. It gives a complete description of all user accessible system functions, examples and error messages. (orig.)

  15. User Communities i Innovationsprocessen

    DEFF Research Database (Denmark)

    Brix, Jacob; Sejer Jakobsen, Henning; Jordansen, Inger

    to workshops uden fysisk tilstedeværelse af deltagerne med internettet som kommunikationskanal (online user communities via Skype & blogs). Empirien stammer fra BDI projektet Handivision1, hvor målgruppen og brugergruppen primært har været personer med fysiske funktionsnedsættelser. Vores analyse...

  16. 16. ESRF users meeting

    International Nuclear Information System (INIS)

    This document gathers the posters that were presented during the poster session of this workshop. These posters highlight the results obtained by ESRF'users in different fields such as surface structure, Compton scattering studies, localized vibrational modes in thermoelectric materials, Ni-Ti thin films, residual stresses in superconducting wires, and changes in crystal and magnetic structure of NdFeO3

  17. Users Office - Removal

    CERN Multimedia

    CERN Bulletin

    2010-01-01

    As of 8 December 2010 and until the end of February 2011, the Users Office will move from Bldg. 60. New Location : Bldg. 510-R-033 Opening Hours: Monday, Tuesday, Thursday, Friday : 08.30 – 12.30 Monday to Friday: 14.00 – 16.00 Closed Wednesday mornings.

  18. Myocardial bridges: morphological and functional aspects.

    OpenAIRE

    A.G. Ferreira; Trotter, S E; König, B; Décourt, L V; Fox, K; Olsen, E G

    1991-01-01

    OBJECTIVE--To assess the arrangement of myocardial bridges. DESIGN--A necropsy study of 90 consecutive hearts (56 male, 34 female). RESULTS--Myocardial bridges, either single or multiple, were seen in 50 (55.6%) of the 90 hearts. The left anterior descending artery was the most commonly affected artery. Thirty five of the 50 hearts which contained in total 41 muscle bridges were dissected further with a magnifying glass. Two different types of muscle bridges could be identified. Thirty one of...

  19. Review of Energy Harvesters Utilizing Bridge Vibrations

    Directory of Open Access Journals (Sweden)

    Farid Ullah Khan

    2016-01-01

    Full Text Available For health monitoring of bridges, wireless acceleration sensor nodes (WASNs are normally used. In bridge environment, several forms of energy are available for operating WASNs that include wind, solar, acoustic, and vibration energy. However, only bridge vibration has the tendency to be utilized for embedded WASNs application in bridge structures. This paper reports on the recent advancements in the area of vibration energy harvesters (VEHs utilizing bridge oscillations. The bridge vibration is narrowband (1 to 40 Hz with low acceleration levels (0.01 to 3.8 g. For utilization of bridge vibration, electromagnetic based vibration energy harvesters (EM-VEHs and piezoelectric based vibration energy harvesters (PE-VEHs have been developed. The power generation of the reported EM-VEHs is in the range from 0.7 to 1450000 μW. However, the power production by the developed PE-VEHs ranges from 0.6 to 7700 μW. The overall size of most of the bridge VEHs is quite comparable and is in mesoscale. The resonant frequencies of EM-VEHs are on the lower side (0.13 to 27 Hz in comparison to PE-VEHs (1 to 120 Hz. The power densities reported for these bridge VEHs range from 0.01 to 9539.5 μW/cm3 and are quite enough to operate most of the commercial WASNs.

  20. Risk assessment of strait crossing bridges

    OpenAIRE

    Forsnes, Mari Krogness

    2015-01-01

    The purpose of this thesis is to try to provide an overall risk picture for the planned strait cross- ing (SC) bridges on coastal highway E39 between Trondheim and Kristiansand in Norway. The thesis starts off by explaining the concepts and solutions of SC bridges to understand what the National Public Road Administration (NPRA) is planning to accomplish with the coastal high- way E39. The SC bridges cannot be compared to any other bridge structures in the world, which will lead to some chall...

  1. Time, Attitude, and User Participation

    DEFF Research Database (Denmark)

    Pries-Heje, Lene

    2008-01-01

    , equivocation, resistance and rejection depending on three things: (1) the dynamic between user and consultants, (2) the dynamic between different user groups, and (3) the understanding of technical, organizational and socio-technical options. When relating the empirical findings to existing theory on user...... participation, it is argued that the changes could be explained as a slide from influential user participation toward pseudo participation and back to influential participation, and that user participation in the context of ERP implementations raises new issues regarding user participation. Thus further...... research regarding new approaches and/or new techniques and tools for user participation in the context of ERP implementations is needed. Udgivelsesdato: 2008...

  2. Maximizing User Satisfaction by Improving coding efficiency of MDC Video

    DEFF Research Database (Denmark)

    Banoth, Rajkumar

    2012-01-01

    Due to the emerging technologies for video compression and broadband Internet, video streaming services are made available. Live video streaming without delay is a reality now. However, the available bandwidth has to be allocated optimally when video streaming takes place over a multicast network....... This is because users have different requirement with respect to bandwidth. Moreover, the users may need streaming to their mobile devices, PCs or high – definition TV. In order to allocate bandwidth based on user requirement, the users can be grouped into various categories. This will facilitate to...

  3. Average Minimum Transmit Power to achieve SINR Targets: Performance Comparison of Various User Selection Algorithms

    CERN Document Server

    Salim, Umer

    2010-01-01

    In multi-user communication from one base station (BS) to multiple users, the problem of minimizing the transmit power to achieve some target guaranteed performance (rates) at users has been well investigated in the literature. Similarly various user selection algorithms have been proposed and analyzed when the BS has to transmit to a subset of the users in the system, mostly for the objective of the sum rate maximization. We study the joint problem of minimizing the transmit power at the BS to achieve specific signal-to-interference-and-noise ratio (SINR) targets at users in conjunction with user scheduling. The general analytical results for the average transmit power required to meet guaranteed performance at the users' side are difficult to obtain even without user selection due to joint optimization required over beamforming vectors and power allocation scalars. We study the transmit power minimization problem with various user selection algorithms, namely semi-orthogonal user selection (SUS), norm-based...

  4. Stigma towards Marijuana Users and Heroin Users.

    Science.gov (United States)

    Brown, Seth A

    2015-01-01

    Despite high levels of stigmatizing attitudes and behaviors toward individuals with substance use problems, there is surprisingly limited research on understanding the contributors to such high levels. College students with no history of marijuana or heroin use (N=250) completed self-report measures to examine the level of substance use stigma towards individuals using two illicit substances (marijuana and heroin) and the contribution of three perceiver characteristics (sex, previous contact with substance users, and five beliefs about substance use) to three dimensions of stigma (social distance, negative emotions, and forcing treatment). Greater levels of internalized stigma were noted towards individuals who use heroin (versus marijuana). For marijuana use, those who had less previous contact and higher endorsement of certain beliefs (rarity, severity, and less controllability) were associated with greater stigmatizing attitudes. For heroin use, the associations were weak or non-existent. The findings strengthen the argument that substance use stigma needs to be examined and perhaps addressed substance by substance, rather than as a group. Further, contact interventions may be a particularly effective strategy for altering substance use stigma. PMID:26148124

  5. SHARP User Manual

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Y. Q. [Argonne National Lab. (ANL), Argonne, IL (United States); Shemon, E. R. [Argonne National Lab. (ANL), Argonne, IL (United States); Thomas, J. W. [Argonne National Lab. (ANL), Argonne, IL (United States); Mahadevan, Vijay S. [Argonne National Lab. (ANL), Argonne, IL (United States); Rahaman, Ronald O. [Argonne National Lab. (ANL), Argonne, IL (United States); Solberg, Jerome [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-03-31

    SHARP is an advanced modeling and simulation toolkit for the analysis of nuclear reactors. It is comprised of several components including physical modeling tools, tools to integrate the physics codes for multi-physics analyses, and a set of tools to couple the codes within the MOAB framework. Physics modules currently include the neutronics code PROTEUS, the thermal-hydraulics code Nek5000, and the structural mechanics code Diablo. This manual focuses on performing multi-physics calculations with the SHARP ToolKit. Manuals for the three individual physics modules are available with the SHARP distribution to help the user to either carry out the primary multi-physics calculation with basic knowledge or perform further advanced development with in-depth knowledge of these codes. This manual provides step-by-step instructions on employing SHARP, including how to download and install the code, how to build the drivers for a test case, how to perform a calculation and how to visualize the results. Since SHARP has some specific library and environment dependencies, it is highly recommended that the user read this manual prior to installing SHARP. Verification tests cases are included to check proper installation of each module. It is suggested that the new user should first follow the step-by-step instructions provided for a test problem in this manual to understand the basic procedure of using SHARP before using SHARP for his/her own analysis. Both reference output and scripts are provided along with the test cases in order to verify correct installation and execution of the SHARP package. At the end of this manual, detailed instructions are provided on how to create a new test case so that user can perform novel multi-physics calculations with SHARP. Frequently asked questions are listed at the end of this manual to help the user to troubleshoot issues.

  6. Usability Testing of User Manuals

    DEFF Research Database (Denmark)

    Møller, Margrethe H.

    2013-01-01

    Many guidelines and several standards exist for the development of good user manuals. But even though technical writers comply with all guidelines, problems will typically arise when users apply the manual in practice. Therefore, it is useful to have real users test the manual before...... it is published. This article discusses user tests in the form of think-aloud tests, with examples from the research project ”User Manuals for older adults"....

  7. User experience in project management

    OpenAIRE

    Mavsar, Primož

    2010-01-01

    This thesis describes one of the most recommended ways of integration user experience and its designers in the process of project management. The first part describes the domain of the user experience, what user experience is, which are the current and upcoming trends, describes the fields of user experience, along with recommendations and advices on its planning. The first part ends with an indication of the most used methods in designing the user experience. The second part describes bes...

  8. Seismic bridge pier analysis for pile foundation by force and displacement based approaches

    OpenAIRE

    Singh NP.R.; Vinayak Hemant Kumar

    2015-01-01

    Seismic analysis of bridge pier supported on pile foundation requires consideration of soil-pile-structure (kinematic and inertial) interactions. This paper presents the design forces generated for bridge piers with varying height and constant diameter for medium and soft soils in earthquake probability zones considering contribution of soil-pile-structure interactions by developed analytical approaches. The results have shown that the difference in base sh...

  9. Strain-Based Evaluation of a Steel Through-Girder Railroad Bridge

    OpenAIRE

    Daumueller, Andrew N.; David V. Jáuregui

    2012-01-01

    In the state of New Mexico (USA), passenger rail began in 2008 between Belen and Santa Fe on the Rail Runner, following the acquisition of about 100 miles of existing rail and related infrastructure. Many of the bridges on this route are over 100 years old and contain fatigue prone details. This study focuses on a steel through-girder bridge along this corridor. To accurately evaluate these structures for load carrying capacity and fatigue, an accurate analytical model is required. Accordingl...

  10. Seismic Performance Analysis of Bridges with Isolation Devices Enhanced by Hybrid Dynamic Substructuring

    OpenAIRE

    Cazzador, Enrico

    2016-01-01

    The Seismic Performance Analysis of Bridges (SPAB) constitutes one of the biggest challenges for structural and civil engineers. In fact, the handling of these design problems requires a deep knowledge of structural behavior and a huge expertise with numerical and analytical tools necessary to perform advanced Finite Element (FE) simulations including dynamic and probabilistic aspects. Within the scope of SPAB, this thesis proposes the analysis of complex bridges assisted by the profitable we...

  11. Workstation Modelling and Development: Clinical Definition of a Picture Archiving and Communications System (PACS) User Interface

    Science.gov (United States)

    Braudes, Robert E.; Mun, Seong K.; Sibert, John L.; Schnizlein, John; Horii, Steven C.

    1989-05-01

    A PACS must provide a user interface which is acceptable to all potential users of the system. Observations and interviews have been conducted with six radiology services at the Georgetown University Medical Center, Department of Radiology, in order to evaluate user interface requirements for a PACS system. Based on these observations, a conceptual model of radiology has been developed. These discussions have also revealed some significant differences in the user interface requirements between the various services. Several underlying factors have been identified which may be used as initial predictors of individual user interface styles. A user model has been developed which incorporates these factors into the specification of a tailored PACS user interface.

  12. How do users of different academic areas perceive user friendliness of IR

    Directory of Open Access Journals (Sweden)

    Polona Vilar

    2008-01-01

    Full Text Available The paper presents one part of a wider study,performed at the Department of LIS&BS at the Faculty of Arts in Ljubljana. The study investigated the perceptions of user friendliness of information retrieval systems’ (IRSinterfaces and the role of individual characteristics of users in these perceptions. A user study with 61 postgraduate students of the University of Ljubljana was performed.Three interfaces were studied: Science Direct,Proquest Direct and Ebsco Host.Questionnaires and observation were used for data collection. The users’ perceptions of importance of auxiliary functions, interface preference and perceptions of user friendliness of certain interface elements were investigated.Also,the connections between these perceptions and the users’individual characteristics were identified. Three sets of individual characteristics were included:approaches to studying,thinking styles and hemisphere leanings. In connection with the dimensions of individual characteristics very different user perceptions were expressed. Some dimensions of individual characteristics were also found to be connected to the users’academic areas. It is shown that the participants from different academic areas have different requirements and perceptions of user friendliness. The results of the study are relevant for the design of the user interfaces of disciplinary IRS.They also have implications for other areas,e.g.user education and training,acquisition and marketing.

  13. 23 CFR 650.409 - Evaluation of bridge inventory.

    Science.gov (United States)

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Evaluation of bridge inventory. 650.409 Section 650.409... Evaluation of bridge inventory. (a) Sufficiency rating of bridges. Upon receipt and evaluation of the bridge inventory, a sufficiency rating will be assigned to each bridge by the Secretary in accordance with...

  14. 49 CFR 237.101 - Scheduling of bridge inspections.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Scheduling of bridge inspections. 237.101 Section... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION BRIDGE SAFETY STANDARDS Bridge Inspection § 237.101 Scheduling of bridge inspections. (a) Each bridge management program shall include a provision for scheduling...

  15. 33 CFR 118.85 - Lights on vertical lift bridges.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Lights on vertical lift bridges... BRIDGES BRIDGE LIGHTING AND OTHER SIGNALS § 118.85 Lights on vertical lift bridges. (a) Lift span lights. The vertical lift span of every vertical lift bridge shall be lighted so that the center of...

  16. User`s guide to ESME v. 8.1

    Energy Technology Data Exchange (ETDEWEB)

    MacLachlan, J.

    1993-08-26

    ESME is a computer program to calculate the evolution of a distribution of particles in energy and azimuth as it is acted upon by the radio frequency system of a proton synchrotron. It provides for the modeling of multiple rf systems, feedback control, space charge, and many of the effects of longitudinal coupling impedance. The capabilities of the program are described, and the requirements for input data are specified in sufficient detail to permit significant calculations by an uninitiated user. The program is currently at version 8.1 and extensively modified since the previous user documentation. Changes since the 7.xx versions include a new command and associated parameters for mapping phase space flow lines, new names for a few parameters, and a few new parameters for old commands. Special attention has been given to features relating to calculation of the collective potential and the generation of phase space trajectories including its effects. The VAX-based code management convention has been modified slightly to permit pre-compile options to be used in the include files as well as the program source files. The biggest change from v. 8.0 to v. 8.1 is the addition of code for HIGZ-based graphics; the new code and that using DI3000/GRAFMAKER are alternatives selectable at compilation. Other changes relate to improved control of smoothing options in the calculation of collective potential, fourier spectra, and mountain range plots.

  17. Personal Service Environments - Openness and User Control in User-Service Interaction

    OpenAIRE

    Bylund, Markus; Waern, Annika

    2001-01-01

    We describe an approach for mobile and personalized use of electronic services that meet very high requirements on openness, user control, and mobility. The design is centered on the concept of personal service environments. These offer users mobile and network independent access to services from many different types of devices. The concept also allows services to interact locally. This can be used in several ways: services can for example share information but also make use of each other's s...

  18. Living Lab Research Landscape: From User Centred Design and User Experience towards User Cocreation

    OpenAIRE

    PALLOT, Marc; Trousse, Brigitte; Senach, Bernard; Scapin, Dominique

    2010-01-01

    New paradigms, such as Open Innovation (Chesbrough, 2003) and Web 2.0 (O'Reilly, 2004) as well as Living Labs operating as a User Centred Open Innovation Ecosystem (Pallot, 2009), promote a more proactive role of users in the R&D process. However, a number of existing methods for involving users are abundantly described in the literature, such as Lead User (Von Hippel, 2005), User Driven Innovation (Von Hippel, 1986), User Centred Design (Von Hippel, 2005) and User Created Content (O'Reilly, ...

  19. Assessment of exposure pathways connected with construction and operation of concrete bridge reinforced with very low level radioactive steel

    International Nuclear Information System (INIS)

    Large amount of low level radioactive material arises during decommissioning of nuclear power plants. Material mostly comprises metal scrap and concrete ruble. Paper deals with recycling and reuse of metal scrap and its utilization as part of reinforcement of concrete bridges under the conditional release concept. Radiation exposure originating in very low level reinforcement steel consists of several exposure pathways. Short-term radiation impact is represented mostly by external exposure pathway and it is relevant to the construction workers and users of the bridge. Long-term radiation impacts on inhabitants living near finished bridge and it is divided into inhalation and ingestion of radionuclides-internal exposure pathways. Radiation impact caused by utilization of very low level radioactive waste was calculated using simulation software VISIPLAN 3D ALARA and GOLDSIM. Results of calculations provide fair summary of possibilities of utilization of conditionally released steel as reinforcement of concrete bridges. (Authors)

  20. Importance of Requirement Management : A Requirement Engineering Concern

    Directory of Open Access Journals (Sweden)

    Dhirendra Pandey

    2012-06-01

    Full Text Available Requirement engineering is first phase of software development processes and it is most important phase for every software development model. In requirement engineering phase we can gather the requirements from user and use this requirement to software development and produce software product that satisfy the user needs. In this research paper we describe the fundamental description of requirement engineering and present the basics dimensions of requirement engineering. Also, in this research paper we also give the basic idea of software requirement specification and present the concept of why requirement management is important for software development.

  1. Adopting E-commerce to User's Needs

    CERN Document Server

    Alshehri, Mohammad; Sawle, James; Baqar, Mai Abu

    2012-01-01

    The objectives of this paper are to identify and analyse the extent to which the site is fulfilling all the user's requirements and needs. The related works comprise the history of interactive design and the benefits of user-centered development, which is the methodology followed in this survey. Moreover, there is a brief comparison between Waterfall and User-centered methodology in terms of addressing the issues of time saving and addressing fulfilment of users' needs. The data required to conduct this study was acquired using two research methods; the questionnaire and direct user observation, in order to address all the performance related attributes in the usability stage of the evaluation. An evaluation of the website, based on statements of usability goals and criteria, was undertaken in relation to the implementation and testing of the new design. JARIR bookstore website was chosen as a case study in this paper to investigate the usability and interactivity of the website design. The analysis section i...

  2. Adopting E-Commerce To User's Needs

    Directory of Open Access Journals (Sweden)

    Mohammad Alshehri

    2012-03-01

    Full Text Available The objectives of this paper are to identify and analyse the extent to which the site is fulfilling all the user’s requirements and needs. The related works comprise the history of interactive design and the benefits of user-centered development, which is the methodology followed in this survey. Moreover, there is a brief comparison between Waterfall and User-centered methodology in terms of addressing the issues of time saving and addressing fulfilment of users’ needs. The data required to conduct this study was acquired using two research methods; the questionnaire and direct user observation, in order to address all the performance related attributes in the usability stage of the evaluation. An evaluation of the website, based on statements of usability goals and criteria, was undertaken in relation to the implementation and testing of the new design. JARIR bookstore website was chosen as a case study in this paper to investigate the usability and interactivity of the website design. The analysis section includes needs, users and tasks and data analysis, whereas the design phase covers the user interface and database design. At the end of this paper, some recommendations are presented regarding JARIR website that can be taken into account when developing the website in the future.

  3. Outside users payload model

    Science.gov (United States)

    1985-01-01

    The outside users payload model which is a continuation of documents and replaces and supersedes the July 1984 edition is presented. The time period covered by this model is 1985 through 2000. The following sections are included: (1) definition of the scope of the model; (2) discussion of the methodology used; (3) overview of total demand; (4) summary of the estimated market segmentation by launch vehicle; (5) summary of the estimated market segmentation by user type; (6) details of the STS market forecast; (7) summary of transponder trends; (8) model overview by mission category; and (9) detailed mission models. All known non-NASA, non-DOD reimbursable payloads forecast to be flown by non-Soviet-block countries are included in this model with the exception of Spacelab payloads and small self contained payloads. Certain DOD-sponsored or cosponsored payloads are included if they are reimbursable launches.

  4. COLETTE users' guide

    International Nuclear Information System (INIS)

    This guide describes the computer program COLETTE. It has been purposely designed to reduce the small-angle data collected on the ISIS small-angle neutron camera LOQ in an interactive and user-friendly manner. This not only gives the LOQ user an opportunity to inspect data rapidly and comprehensively during the course of an experiment but also provides the instrument scientists with a flexible diagnostic tool with which they can monitor the performance of the instrument. After the experiment is completed, COLETTE may be used to provide the final I(Q) versus Q following subtraction of a sample background run and normalisation to a scattering standard. By limiting the range of azimuthal angles included in the analysis the program may take sections through an anisotropic scattering pattern from an ordered system. A completely two dimensional I(Qx,Qy) map may also be generated. (author)

  5. A User Driven Dynamic Circuit Network Implementation

    OpenAIRE

    Guok, Chin

    2009-01-01

    The requirements for network predictability are becoming increasingly critical to the DoE science community where resources are widely distributed and collaborations are world-wide. To accommodate these emerging requirements, the Energy Sciences Network has established a Science Data Network to provide user driven guaranteed bandwidth allocations. In this paper we outline the design, implementation, and secure coordinated use of such a network, as well as some lessons learned.

  6. A User Driven Dynamic Circuit Network Implementation

    Energy Technology Data Exchange (ETDEWEB)

    Guok, Chin; Robertson, David; Chaniotakis, Evangelos; Thompson, Mary; Johnston, William; Tierney, Brian

    2008-10-01

    The requirements for network predictability are becoming increasingly critical to the DoE science community where resources are widely distributed and collaborations are world-wide. To accommodate these emerging requirements, the Energy Sciences Network has established a Science Data Network to provide user driven guaranteed bandwidth allocations. In this paper we outline the design, implementation, and secure coordinated use of such a network, as well as some lessons learned.

  7. Competence and lastingness in specialized clinical laboratories: technical report about requirements concerning quality of users competence and used processes in immunochemical diagnostic procedures using isotopic and non-isotopic tracer technologies

    International Nuclear Information System (INIS)

    From the citizens view this technical report about immunochemical diagnostic procedures using radioactive and nonradioactive tracer technologies describes the requirements in special laboratory diagnostics concerning competency and process control. Governmental or administrational obligations of inspecting both skill and sites to guarantee patients security are pointed out. (orig.)

  8. Internet: Infrastructure, users, regulation

    OpenAIRE

    Mikhail Doroshevich; Marina Sokolova

    2014-01-01

    By the end of 2014, Belarus totaled over 5 million Internet users, which constitutes 70% of the population aged 15 to 74. The Internet has become not only an integral part of everyday life, but also a platform for activities of state-controlled and private companies and organizations. Infrastructural development (like broadband Internet) remains a key element of the strategy of an informationoriented society. The download speed in Belarus is lower than in the neighboring countries and the cos...

  9. Single user systems

    International Nuclear Information System (INIS)

    The first part of the talk is devoted to establishing concepts and trends in interactive computing technology and is intended to provide a framework. I then discuss personal computing architectures of today and planned architectures of the 1990s. I present current personal computer environments for the programmer and for the user. Scenarios for future computing environments are developed. Finally, I open a discussion on the social implications of personal computers. (orig./HSI)

  10. 16. ESRF users meeting

    Energy Technology Data Exchange (ETDEWEB)

    Coraux, J.; Renevier, H.; Favre-Nicolin, V.; Daudin, B.; Proietti, M.G.; Renaud, G.; Fowler, B.; Mercer, D.L.; Omar, A.H.; Thompson, P.; Markovic, N.M.; Stamenkovic, V.; Lucas, C.A.; Andrejczuk, A.; Kwiatkowska, J.; Dobrzynski, L.; Zukowski, E.; Bellin, Ch.; Loupias, G.; Shukla, A.; Buslaps, Th.; Stankov, S.; Sladecek, M.; Slezak, T.; Korecki, J.; Spiridis, N.; Sepiol, B.; Vogl, G.; Chumakov, A.; Ruffer, R.; Hermann, R.P.; Grandjean, F.; Schweika, W.; Long, G.J.; Leupold, O.; Belrhall, H.; Caserotto, H.; Dauvergne, F.; Geoffroy, L.; Guljarro, M.; Launer, L.; Levault, B.; Walsh, M.; Beckers, M.; Schell, N.; Martins, R.M.S.; Mucklich, A.; Moller, W.; Silva, R.J.C.; Mahesh, K.K.; Braz Fernandes, F.M.; Tejas, Parikh; Neil, Fellows; Durodola, J.; Slawinski, W.; Przenioslo, R.; Sosnowska, I.; Suard, E

    2006-07-01

    This document gathers the posters that were presented during the poster session of this workshop. These posters highlight the results obtained by ESRF'users in different fields such as surface structure, Compton scattering studies, localized vibrational modes in thermoelectric materials, Ni-Ti thin films, residual stresses in superconducting wires, and changes in crystal and magnetic structure of NdFeO{sub 3}.

  11. Internet user behaviour

    OpenAIRE

    Radbâță, A.

    2011-01-01

    Internet is a useful tool for everybody in a technologically advanced world. As Internet appears and develops, it creates a totally new network environment. The development of commerce on the Internet based on virtual communities has become one of the most successful business models in the world. After analyzing the concept of internet, the e-commerce market and its marketing mix and the benefits and limitations of the Internet, we have presented a few studies on Internet user behaviour. Furt...

  12. EDDYNET: A user's manual

    International Nuclear Information System (INIS)

    This user's guide provides a description of the EDDYNET code, which is used to model transient eddy currents in conducting shells. Subroutines and functions are described, and the input variables and file format are explained. Examples are given of input and output files from the program. A description is given of special features of the program, including temperature diffusion, field and flux from circular rings, and current-angular deflection coupling. 13 refs., 6 figs

  13. Bridge weigh-in-motion on steel orthotropic decks and application to bridge assessment

    OpenAIRE

    Jacob, Bernard; Ieng, Sio Song; SCHMIDT, Franziska

    2012-01-01

    Bridge weigh-in-motion uses an instrumented bridge as a scale to weigh vehicles. Several types of bridges may be used, if being sensitive to wheel or axle loads. Here some strains of steel orthotropic deck bridges are measured by extensometers and analyzed by software, to calculate axle loads and gross vehicle weights. Between 2009 and 2011, several large scale tests were done on the Millau viaduct (France), the tallest cable stayed bridge in the world. These tests showed that the system meet...

  14. Bridge Lock-up Device System

    OpenAIRE

    ECT Team, Purdue

    2007-01-01

    The Colebrand Lock-up Device (LUD) provides additional substructure strength to resist seismic forces as a structural shock transmission unit for highway bridges. This system can provide a temporary rigid link between bridge structural members under seismic, braking, or other fast-acting type loads, while permitting slow thermal movements.

  15. Analysis of Biaxially Stressed Bridge Deck Plates

    DEFF Research Database (Denmark)

    Jönsson, Jeppe; Bondum, Tommi Højer

    The ultimate state analysis of bridge deck plates at the intersection zone between main girders and transverse beams is complicated by biaxial membrane stresses, which may be in compression or tension in either direction depending on the bridge configuration and the specific location. This paper ...

  16. Re-Assessment of Concrete Bridges

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle

    In this paper two aspects of re-assessment of the reliability of concrete bridges are discussed namely modelling of the corrosion of reinforcement and updating of uncertain variables. The main reason for deterioration of concrete bridges is corrosion of the reinforcement. Therefore, modelling of...

  17. Paul Dirac:. Building Bridges of the Mind

    Science.gov (United States)

    Brown, Laurie M.

    2003-12-01

    Paul Dirac was a brilliant and original thinker. He used his physical intuition and his ideal of mathematical beauty to construct bridges between major areas of physics. This article discusses several such important works, including the bridge between quantum mechanics and relativity that led to his prediction of the existence of antimatter.

  18. Fast response Full Bridge Power Factor Corrector

    OpenAIRE

    Chan, CH; Pong, MH

    1998-01-01

    A fast response Full Bridge Power Factor Corrector (FBPFC) is presented in this paper. The converter is combined by two interleaved boost cells and a conventional full bridge converter. As the interleaving technique is applied, the input ripple current of FBPFC are reduced. Experimental result shows that the maximum power factor is 0.98 even without input filter.

  19. A STUDY OF BARRIERS IN BRIDGING COMMUNICATION

    OpenAIRE

    Niteen V. Dandekar

    2014-01-01

    The main objective of this paper is to make a thought provoking discussion on the role barriers in bridging communication. It focuses on the concept of communication, process and the role of language related barriers in bridging communication. It studies the significance of communication in modern human life.

  20. Heavy Vehicles on Minor Highway Bridges

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Nielsen, Søren R. K.; Enevoldsen, I.

    the results obtained using the numerical models given in details in "Heavy Vehicles on Minor Highway Bridges : dynamic modelling of vehicles and bridges". The models are established using a ordinary vehicle which consists of a 48 t Scania with a 3 axle tractor and a 3 axle trailer, joined in a flexible hinge...

  1. General framework for bridge life cycle design

    Institute of Scientific and Technical Information of China (English)

    Junhai MA; Airong CHEN; Jun HE

    2009-01-01

    Based on a detailed illustration for bridge life cycle design which comprises the processes of service life design, aesthetics design, performance design, environ-mental and ecological design, inspection, maintenance and repair design as well as cost analysis, this paper presented a general framework for bridge life cycle design comprising three design phases and six design processes.

  2. History of cable-stayed bridges

    DEFF Research Database (Denmark)

    Gimsing, Niels Jørgen

    1999-01-01

    The principle of supporting a bridge deck by inclined tension members leading to towers on either side of the span has been known for centuries. However, the real development of cable-stayed bridges did not begin before the 1950s. Since then the free span has been increased from 183 m in the Strö...

  3. COUPLING VIBRATION OF VEHICLE-BRIDGE SYSTEM

    Institute of Scientific and Technical Information of China (English)

    陈炎; 黄小清; 马友发

    2004-01-01

    By applying the sinusoidal wave mode to simulate the rugged surface of bridge deck,accounting for vehicle-bridge interaction and using Euler-Bernoulli beam theory, a coupling vibration model of vehicle-bridge system was developed. The model was solved by mode analyzing method and Runge-Kutta method, and the dynamic response and the resonance curve of the bridge were obtained. It is found that there are two resonance regions, one represents the main resonance while the other the minor resonance, in the resonance curve. The influence due to the rugged surface, the vibration mode of bridge, and the interaction between vehicle and bridge on vibration of the system were discussed. Numerical results show that the influence due to these parameters is so significant that the effect of roughness of the bridge deck and the mode shape of the bridge can't be ignored and the vehicle velocity should be kept away from the critical speed of the vehicle.

  4. An approach to virtual research environment user interfaces dynamic construction

    OpenAIRE

    Assante, Massimiliano; Pagano, Pasquale (ISTI-CNR); Candela, Leonardo; De Faveri, Federico; Lelii, Lucio

    2011-01-01

    Virtual Research Environments are internet-based working environments tailored to serve needs of diverse and evolving user communities. These environments are oriented to promote new ways of dealing with modern research tasks. Their realization requires user interfaces that are dynamically built to provide their clients with organised views on the data and services aggregated to meet specific community needs. This paper presents an approach to the problem of Virtual Research Environment user ...

  5. Usable SPACE: Security, Privacy, and Context for the Mobile User

    Science.gov (United States)

    Jutla, Dawn

    Users breach the security of data within many financial applications daily as human and/or business expediency to access and use information wins over corporate security policy guidelines. Recognizing that changing user context often requires different security mechanisms, we discuss end-to-end solutions combining several security and context mechanisms for relevant security control and information presentation in various mobile user situations. We illustrate key concepts using Dimitri Kanevskys (IBM Research) early 2000s patented inventions for voice security and classification.

  6. User Interface for Volume Rendering in Virtual Reality Environments

    OpenAIRE

    Klein, Jonathan; Reuling, Dennis; Grimm, Jan; Pfau, Andreas; Lefloch, Damien; Lambers, Martin; Kolb, Andreas

    2013-01-01

    Volume Rendering applications require sophisticated user interaction for the definition and refinement of transfer functions. Traditional 2D desktop user interface elements have been developed to solve this task, but such concepts do not map well to the interaction devices available in Virtual Reality environments. In this paper, we propose an intuitive user interface for Volume Rendering specifically designed for Virtual Reality environments. The proposed interface allows transfer function d...

  7. Optimum Maintenance Strategies for Highway Bridges

    DEFF Research Database (Denmark)

    Frangopol, Dan M.; Thoft-Christensen, Palle; Das, Parag C.;

    expected life-cycle costs or maximum life-cycle benefits. This is because many maintenance activities can be associated with significant costs, but their effects on bridge safety can be minor. In this paper, the program of an investigation on optimum maintenance strategies for different bridge types is......As bridges become older and maintenance costs become higher, transportation agencies are facing challenges related to implementation of optimal bridge management programs based on life cycle cost considerations. A reliability-based approach is necessary to find optimal solutions based on minimum...... described. The end result of this investigation will be a general reliability-based framework to be used by the UK Highways Agency in order to plan optimal strategies for the maintenance of its bridge network so as to optimize whole-life costs....

  8. Modeling walker synchronization on the Millennium Bridge

    Science.gov (United States)

    Eckhardt, Bruno; Ott, Edward; Strogatz, Steven H.; Abrams, Daniel M.; McRobie, Allan

    2007-02-01

    On its opening day the London Millennium footbridge experienced unexpected large amplitude wobbling subsequent to the migration of pedestrians onto the bridge. Modeling the stepping of the pedestrians on the bridge as phase oscillators, we obtain a model for the combined dynamics of people and the bridge that is analytically tractable. It provides predictions for the phase dynamics of individual walkers and for the critical number of people for the onset of oscillations. Numerical simulations and analytical estimates reproduce the linear relation between pedestrian force and bridge velocity as observed in experiments. They allow prediction of the amplitude of bridge motion, the rate of relaxation to the synchronized state and the magnitude of the fluctuations due to a finite number of people.

  9. Dynamic analysis concerned with rotational displacement of skewed bridges caused by horizontal ground motion; Shakyo no suihei jishindo ni yoru kaiten kyodo kaiseki

    Energy Technology Data Exchange (ETDEWEB)

    Otsuka, H. [Kyushu University, Fukuoka (Japan). Faculty of Engineering; Kanda, M. [Ministry of Construction, Tokyo (Japan); Suzuki, M. [Tohoku University, Sendai (Japan); Kawakami, M. [Nippon Engineering Consultant Co. Ltd., Tokyo (Japan)

    1997-07-21

    Several skewed bridges were slid and fell down from their supports by the 1995 Hyogo-Ken Nanbu Earthquake. The purpose of this paper is to study the in-plane rotational behaviour of the skewed bridges after failure of side blocks of the bearing by the horizontal ground motion. Firstly, geometric configuration of the skewed bridges in which the rotation is inevitable is investigated. Then, the rotational displacement of the skewed bridges are obtained by conducting non- linear time- history analyses in which a friction type hysteresis model is assumed to simulate the sliding of the bridge at the supports. It is found that the skewed bridges with small width-span ratios and small skew angles may have considerable sliding rotational displacements and fall down from their supports if adequate seat width is not provided. The requirement of the support length in skewed bridges is also presented. 6 refs., 20 figs., 5 tabs.

  10. Development of the applicability of simplified Henry's method for skewed multicell box-girder bridges under traffic loading conditions

    Institute of Scientific and Technical Information of China (English)

    Iman MOHSENI; A.R.Khalim RASHID

    2012-01-01

    Concrete precast multicell box-girder (MCB) bridges combine aesthetics with torsional stiffness perfectly.Previous analytical studies indicate that currently available specifications are unable to consider the effect of the twisting moment (torsional moment) on bridge actions.In straight bridges the effect of torsion is negligible and the transverse reinforced design is governed by other requirements.However,in the case of skewed bridges the effect of the twisting moment should be considered.Therefore,an in-depth study was performed on 90 concrete MCB bridges with skew angles ranging from 0° to 60°.For each girder the bridge actions were determined under the American Association of State Highway and Transportation Officials (AASHTO) live load conditions.The analytical results show that torsional stiffness and live load positions greatly affected the bridges' responses.In addition,based on a statistical analysis of the obtained results,several skew correction factors are proposed to improve the precision of the simplified Henry's method,which is widely used by bridge engineers to predict bridge actions.The relationship between the bending moment and secondary moments was also investigated and it was concluded that all secondary actions increase with an increase in skewness.

  11. I35W collapse, rebuild, and structural health monitoring - challenges associated with structural health monitoring of bridge systems

    International Nuclear Information System (INIS)

    During evening rush hour traffic on August 1, 2007, the major interstate highway bridge carrying I35W over the Mississippi River in Minneapolis catastrophically failed, tragically taking the lives of thirteen people and injuring many more. The steel truss bridge, constructed in 1967, was undergoing deck reconstruction during the collapse, and was estimated to carry more than 140,000 vehicles daily. This tragedy generated great interest in employment of structural health monitoring systems. The I35W St. Anthony Falls Bridge, a post-tensioned concrete box bridge constructed to replace the collapsed steel truss bridge, contains over 500 instruments to monitor the structural behavior. Numerical models of the bridge are being developed and calibrated to the collected data obtained from truck load tests and thermal effects. The data obtained over the first few years of monitoring are being correlated with the calibrated models and used to develop the baseline bridge behavior. This information is being used to develop a system to monitor and interpret the long-term behavior of the bridge. This paper describes the instrumentation, preliminary results from the data and model calibration, the plan for developing long-term monitoring capabilities, and the challenges associated with structural health monitoring of bridge systems. In addition, opportunities and directions for future research required to fully realize the objectives of structural health monitoring are described.

  12. Life-Cycle Monitoring of Long-Span PSC Box Girder Bridges through Distributed Sensor Network: Strategies, Methods, and Applications

    Directory of Open Access Journals (Sweden)

    Zheheng Chen

    2015-01-01

    Full Text Available Structural health monitoring (SHM has attracted much attention in recent years, which enables early warnings of structural failure, condition assessments, and rational maintenance/repair strategies. In the context of bridges, many long-span steel bridges in China have been installed with the SHM systems; however, the applications of the SHM in prestressed concrete (PSC bridges are still rather limited. On the other hand, the PSC box girder bridges are extensively used in highway and railway systems and premature damage of these bridges is often reported, resulting in considerable maintenance and/or replacement costs. First, this paper presents a state-of-art review on the SHM of long-span PSC bridges. Monitoring strategies, methods, and previous applications for these bridges are summarized and discussed. In order to well capture the behavior of the bridge during its whole life and to maximize the use of sensors, a life-cycle monitoring strategy is proposed, in which the sensor layout is determined according to requirements for construction monitoring, completion test, and in-service monitoring. A case study is made on a three-span PSC box girder bridge in China. The system configuration, sensor layout, and data communications, and so forth, are presented. The up-to-date monitored structural responses are analyzed and compared with the design values.

  13. Building bridges … and accelerators

    CERN Multimedia

    2009-01-01

    Lyn Evans, the LHC project leader, was awarded an honorary doctorate from the University of Geneva (UNIGE) to celebrate his role not just in building accelerators, but also in building bridges between nations. He was one of four notables honoured at the event on Friday 5 June, coinciding with the University’s 450th Anniversary. Lyn Evans arriving at the ceremony with Archbishop Desmond Tutu. "It was a big surprise when I found out I’d been nominated," recounts Evans, "but it was an even bigger surprise to find out with whom I’d been nominated". At the ceremony Evans was awarded the honorary doctorate along with three others: Archbishop Desmond Tutu, who was acclaimed for his fight against apartheid in South Africa, Mary Robinson, first woman president of Ireland and former United Nations’ high commissioner of human rights, and Pascal Lamy, Director-General of the World Trade Organization. The award ceremony, known as the �...

  14. USER 2.1; User Specified Estimation Routine, Techncial Manual 2003.

    Energy Technology Data Exchange (ETDEWEB)

    Lady, James; Westhagen, Peter; Skalski, John

    2003-07-01

    This document is primarily a description of the user interface for USER2.1; it is not a description of the statistical theory and calculations behind USER. This project is funded by the Bonneville Power Administration, U.S. Department of Energy, under Contract No. 004126, Project No. 198910700 as part of the BPA's program to protect, mitigate, and enhance fish and wildlife affected by the development and operation of hydroelectric facilities on the Columbia River and its tributaries. The analysis of fish and wildlife data requires investigators to have the ability to develop statistical models tailored to their study requirements. Hence, a flexible platform to develop statistical likelihood models to estimate demographic parameters is necessary. To this end, Program USER (User Specified Estimation Routine) was developed to provide a convenient platform for investigators to develop statistical models and analyze tagging and count data. The program is capable of developing models and analyzing any count data that can be described by multinomial or product multinomial distributions. Such data include release-recapture studies using PIT-tags, radio-tags, balloon-tags, and acoustic-tags to estimate survival, movement, and demographic data on the age and/or sex structure of wild populations. The user of the program can specify the parameters and model structure at will to tailor the analyses to the specific requirements of the field sampling program, the data, and populations under investigation. All of this is available without the need for the user to know advanced programming languages or numerical analysis techniques, and without involving cumbersome software developed for extraneous purposes. Program USER represents a powerful statistical modeling routine that can be readily used by investigators with a wide range of interests and quantitative skills.

  15. User interface description languages for next generation user interfaces

    OpenAIRE

    Shaer, Orit; Jacob, Robert; Green, Mark; LUYTEN, Kris

    2008-01-01

    In recent years HCI researchers have developed a broad range of new interfaces that diverge from the "window, icon, menu, pointing device" (WIMP) paradigm, employing a variety of novel interaction techniques and devices. Developers of these next generation user interfaces face challenges that are currently not addressed by state of the art user interface software tools. As part of the user interface software community’s effort to address these challenges, the concept of a User Interface Descr...

  16. Assistant pullback technique for main span closure of Sutong Bridge

    Institute of Scientific and Technical Information of China (English)

    Chen Ming; Luo Chengbin; Wu Qihe; Zhang Yongtao; You Xinpeng

    2009-01-01

    Sutong Bridge is a cable-stayed steel box girder bridge with a main span of 1 088 m. The erection of upper structure adopts geometry control method and requires no change to the unit's size and the structure's none-stress geometry. Before main span closure, the cantilever of girder reaches 540.8 m, the structure state is noticeably influenced by external circumstances, the main span closure face great difficulty. By abstracting the advantage of the pullback method abroad and the domestic temperature-cutting method, a new assistant pullback method have put forward and bring into practice actually. In this paper, the analysis key point of practice conditions, key parameter of practice, main measures of the method and the performance is introduced.

  17. Failure analysis of an Oregon coast reinforced concrete bridge

    Energy Technology Data Exchange (ETDEWEB)

    Holcomb, Gordon R.; Covino, Bernard S., Jr.; Cramer, Stephen D.; Bullard, Sophie J.; Russell, James H.; Soltesz, S.M. (Oregon Dept. of Transportation; Laylor, H.M. (Oregon Dept. of Transportation)

    2001-01-01

    The coastal highway along the Oregon coast contains many reinforced concrete bridges constructed between 1925 and 1955. Chloride-induced corrosion resulted in the need for the rehabilitation or replacement of a number of these bridges. A failure analysis of the Rocky Point Viaduct (built in 1954, patched in 1969, replaced in 1994) is presented. Analysis included powder sampling and profiling of Cl concentration, determining the permeable void fraction in the concrete, and measuring rebar half cell potentials. Insufficient concrete cover over the shear stirrups was the major factor in the premature failure of the Viaduct. The time required for corrosion initiation and cracking was modeled by calculating diffusion parameters (surface Cl concentration (Co) and diffusion coefficient (D)) from Cl profiles. The model was used to examine the relative ineffectiveness of the patch repairs by showing increased Cl transport in the patch due to both higher Co and D values.

  18. Parameter identification for the electrical modeling of semiconductor bridges.

    Energy Technology Data Exchange (ETDEWEB)

    Gray, Genetha Anne

    2005-03-01

    Semiconductor bridges (SCBs) are commonly used as initiators for explosive and pyrotechnic devices. Their advantages include reduced voltage and energy requirements and exceptional safety features. Moreover, the design of systems which implement SCBs can be expedited using electrical simulation software. Successful use of this software requires that certain parameters be correctly chosen. In this paper, we explain how these parameters can be identified using optimization. We describe the problem focusing on the application of a direct optimization method for its solution, and present some numerical results.

  19. TWEAT '95: User's documentation update

    International Nuclear Information System (INIS)

    This report is designed to be a supplement to TWEAT'94 (PVTD-C94-05.01K Rev.1). It is intended to describe the primary features of the Ternary Waste Envelope Assessment Tool software package that have been added in FY'95 and how to use them. It contains only minimal duplication of information found in TWEAT'94 even though all features of TWEAT'94 will still be available. Emphasis on this Update is the binary plotting capability and the OWL Import modifications. Like it's predecessors, this manual does not provide instructions for modifying the program code itself. The user of TWEAT'95 is expected to be familiar with the basic concepts and operation of the TWEAT software as discussed in TWEAT'94. Software and hardware requirements have not changed since TWEAT'94. TWEAT has now been tested using Macintosh System software versions 6.05 through 7.5

  20. Finite element of multilayer surfacing systems on orthotropic steel bridges

    OpenAIRE

    Li, J.; Liu, X.; Scarpas, A.; Tzimiris, G.

    2013-01-01

    Light weight orthotropic steel bridge decks have been widely utilized for bridges in seismic zones, movable bridges and long span bridges. In the last three decades, severe problems were reported in relation to asphaltic surfacing materials on orthotropic steel deck bridges. Earlier investigations have shown that the bonding strength of membrane layers to the surrounding materials has a strong influence on the structural response of orthotropic steel bridge decks. The most important requireme...