WorldWideScience

Sample records for breeder reactor components

  1. Fast Breeder Reactor studies

    Energy Technology Data Exchange (ETDEWEB)

    Till, C.E.; Chang, Y.I.; Kittel, J.H.; Fauske, H.K.; Lineberry, M.J.; Stevenson, M.G.; Amundson, P.I.; Dance, K.D.

    1980-07-01

    This report is a compilation of Fast Breeder Reactor (FBR) resource documents prepared to provide the technical basis for the US contribution to the International Nuclear Fuel Cycle Evaluation. The eight separate parts deal with the alternative fast breeder reactor fuel cycles in terms of energy demand, resource base, technical potential and current status, safety, proliferation resistance, deployment, and nuclear safeguards. An Annex compares the cost of decommissioning light-water and fast breeder reactors. Separate abstracts are included for each of the parts.

  2. Investigation of molten salt fast breeder reactor

    Energy Technology Data Exchange (ETDEWEB)

    Kubota, Kenichi; Enuma, Yasuhiro; Tanaka, Yoshihiko; Konomura, Mamoru; Ichimiya, Masakazu [Japan Nuclear Cycle Development Inst., Oarai, Ibaraki (Japan). Oarai Engineering Center

    2000-06-01

    Phase I of Feasibility Studies on Commercialized Fast Reactor System is being performed for two years from Japanese Fiscal Year 1999. In this report, results of the study on fluid fuel reactors (especially a molten salt fast breeder reactor concept) are described from the viewpoint of technical and economical concerns of the plant system design. In JFY1999, we have started to investigate the fluid fuel reactors as alternative concepts of sodium cooled FBR systems with MOX fuel, and selected the unique concept of a molten chloride fast breeder reactor, whose U-Pu fuel cycle can be related to both light water reactors and fast breeder reactors on the basis of present technical data and design experiences. We selected a preliminary composition of molten fuel and conceptual plant design through evaluation of technical and economical issues essential for the molten salt reactors and then compared them with reference design concepts of sodium cooled FBR systems under limited information on the molten chloride fast breeder reactors. The following results were obtained. (1) The molten chloride fast breeder reactors have inherent safety features in the core and plant performances, ad the fluid fuel is quite promising for cost reduction of the fuel fabrication and reprocessing. (2) On the other hand, the inventory of the molten chloride fuel becomes high and thermal conductivity of the coolant is inferior compared to those of sodium cooled FBR systems, then, the size of main components such as IHX's becomes larger and the amount of construction materials is seems to be increased. (3) Furthermore economical vessel and piping materials which contact with the molten chloride salts are required to be developed. From the results, it is concluded that further steps to investigate the molten chloride fast breeder reactor concepts are too early to be conducted. (author)

  3. Experimental Breeder Reactor I Preservation Plan

    Energy Technology Data Exchange (ETDEWEB)

    Julie Braun

    2006-10-01

    Experimental Breeder Reactor I (EBR I) is a National Historic Landmark located at the Idaho National Laboratory, a Department of Energy laboratory in southeastern Idaho. The facility is significant for its association and contributions to the development of nuclear reactor testing and development. This Plan includes a structural assessment of the interior and exterior of the EBR I Reactor Building from a preservation, rather than an engineering stand point and recommendations for maintenance to ensure its continued protection.

  4. Fuel Summary Report: Shippingport Light Water Breeder Reactor - Rev. 2

    Energy Technology Data Exchange (ETDEWEB)

    Olson, Gail Lynn; Mc Cardell, Richard Keith; Illum, Douglas Brent

    2002-09-01

    The Shippingport Light Water Breeder Reactor (LWBR) was developed by Bettis Atomic Power Laboratory to demonstrate the potential of a water-cooled, thorium oxide fuel cycle breeder reactor. The LWBR core operated from 1977-82 without major incident. The fuel and fuel components suffered minimal damage during operation, and the reactor testing was deemed successful. Extensive destructive and nondestructive postirradiation examinations confirmed that the fuel was in good condition with minimal amounts of cladding deformities and fuel pellet cracks. Fuel was placed in wet storage upon arrival at the Expended Core Facility, then dried and sent to the Idaho Nuclear Technology and Engineering Center for underground dry storage. It is likely that the fuel remains in good condition at its current underground dry storage location at the Idaho Nuclear Technology and Engineering Center. Reports show no indication of damage to the core associated with shipping, loading, or storage.

  5. Analysis of UF6 breeder reactor power plants

    Science.gov (United States)

    Clement, J. D.; Rust, J. H.

    1976-01-01

    Gaseous UF6 fueled breeder reactor design and technical applications of such concepts are summarized. Special attention was given to application in nuclear power plants and to reactor efficiency and safety factors.

  6. Conceptual design of Indian molten salt breeder reactor

    Indian Academy of Sciences (India)

    2015-08-28

    Aug 28, 2015 ... Home; Journals; Pramana – Journal of Physics; Volume 85; Issue 3. Conceptual design of Indian molten salt breeder ... India has recently started carrying out fundamental studies so as to arrive at a conceptual design of Indian molten salt breeder reactor (IMSBR). Presently, various design options and ...

  7. Comparative assessment of nuclear fuel cycles. Light-water reactor once-through, classical fast breeder reactor, and symbiotic fast breeder reactor cycles

    Energy Technology Data Exchange (ETDEWEB)

    Hardie, R.W.; Barrett, R.J.; Freiwald, J.G.

    1980-06-01

    The object of the Alternative Nuclear Fuel Cycle Study is to perform comparative assessments of nuclear power systems. There are two important features of this study. First, this evaluation attempts to encompass the complete, integrated fuel cycle from mining of uranium ore to disposal of waste rather than isolated components. Second, it compares several aspects of each cycle - energy use, economics, technological status, proliferation, public safety, and commercial potential - instead of concentrating on one or two assessment areas. This report presents assessment results for three fuel cycles. These are the light-water reactor once-through cycle, the fast breeder reactor on the classical plutonium cycle, and the fast breeder reactor on a symbiotic cycle using plutonium and /sup 233/U as fissile fuels. The report also contains a description of the methodology used in this assessment. Subsequent reports will present results for additional fuel cycles.

  8. Exploding the myths about the fast breeder reactor

    Energy Technology Data Exchange (ETDEWEB)

    Burns, S.

    1979-01-01

    This paper discusses the facts and figures about the effects of conservation policies, the benefits of the Clinch River Breeder Reactor demonstration plant, the feasibility of nuclear weapons manufacture from reactor-grade plutonium, diversion of plutonium from nuclear plants, radioactive waste disposal, and the toxicity of plutonium. The paper concludes that the U.S. is not proceeding with a high confidence strategy for breeder development because of a variety of false assumptions.

  9. Dynamics and control of molten-salt breeder reactor

    Energy Technology Data Exchange (ETDEWEB)

    Sing, Vikram; Lish, Matthew R.; Chvala, Ondrej; Upadhyaya, Belle R. [Dept. of Nuclear Engineering, University of Tennessee, Knoxville (United States)

    2017-08-15

    Preliminary results of the dynamic analysis of a two-fluid molten-salt breeder reactor (MSBR) system are presented. Based on an earlier work on the preliminary dynamic model of the concept, the model presented here is nonlinear and has been revised to accurately reflect the design exemplified in ORNL-4528. A brief overview of the model followed by results from simulations performed to validate the model is presented. Simulations illustrate stable behavior of the reactor dynamics and temperature feedback effects to reactivity excursions. Stable and smooth changes at various nodal temperatures are also observed. Control strategies for molten-salt reactor operation are discussed, followed by an illustration of the open-loop load-following capability of the molten-salt breeder reactor system. It is observed that the molten-salt breeder reactor system exhibits “self-regulating” behavior, minimizing the need for external controller action for load-following maneuvers.

  10. Water cooled breeder program summary report (LWBR (Light Water Breeder Reactor) development program)

    Energy Technology Data Exchange (ETDEWEB)

    1987-10-01

    The purpose of the Department of Energy Water Cooled Breeder Program was to demonstrate pratical breeding in a uranium-233/thorium fueled core while producing electrical energy in a commercial water reactor generating station. A demonstration Light Water Breeder Reactor (LWBR) was successfully operated for more than 29,000 effective full power hours in the Shippingport Atomic Power Station. The reactor operated with an availability factor of 76% and had a gross electrical output of 2,128,943,470 kilowatt hours. Following operation, the expended core was examined and no evidence of any fuel element defects was found. Nondestructive assay of 524 fuel rods determined that 1.39 percent more fissile fuel was present at the end of core life than at the beginning, proving that breeding had occurred. This demonstrates the existence of a vast source of electrical energy using plentiful domestic thorium potentially capable of supplying the entire national need for many centuries. To build on the successful design and operation of the Shippingport Breeder Core and to provide the technology to implement this concept, several reactor designs of large breeders and prebreeders were developed for commercial-sized plants of 900--1000 Mw(e) net. This report summarizes the Water Cooled Breeder Program from its inception in 1965 to its completion in 1987. Four hundred thirty-six technical reports are referenced which document the work conducted as part of this program. This work demonstrated that the Light Water Breeder Reactor is a viable alternative as a PWR replacement in the next generation of nuclear reactors. This transition would only require a minimum of change in design and fabrication of the reactor and operation of the plant.

  11. ORNL breeder reactor safety quarterly technical progress report, July-September 1980

    Energy Technology Data Exchange (ETDEWEB)

    Fontana, M H; Wantland, J L

    1981-01-01

    Six tasks are reported upon: THORS (Thermal-Hydraulic Out-of-Reactor Safety) program, environmental assessment of alternate FBR fuels, model evaluation of breeder reactor radioactivity releases, nuclear safety information center activities, breeder reactor reliability data analysis center activities, and central data base for breeder reactor safety codes. (DLC)

  12. Development of fuels and structural materials for fast breeder reactors

    Indian Academy of Sciences (India)

    Fast breeder reactors (FBRs) are destined to play a crucial role inthe Indian nuclear power programme in the foreseeable future. FBR technology involves a multi-disciplinary approach to solve the various challenges in the areas of fuel and materials development. Fuels for FBRs have significantly higher concentration of ...

  13. Fission-suppressed hybrid reactor: the fusion breeder

    Energy Technology Data Exchange (ETDEWEB)

    Moir, R.W.; Lee, J.D.; Coops, M.S.

    1982-12-01

    Results of a conceptual design study of a /sup 233/U-producing fusion breeder are presented. The majority of the study was devoted to conceptual design and evaluation of a fission-suppressed blanket and to fuel cycle issues such as fuel reprocessing, fuel handling, and fuel management. Studies in the areas of fusion engineering, reactor safety, and economics were also performed.

  14. Molten Salt Breeder Reactor Analysis Methods

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jinsu; Jeong, Yongjin; Lee, Deokjung [Ulsan National Institute of Science and Technology, Ulsan (Korea, Republic of)

    2015-05-15

    Utilizing the uranium-thorium fuel cycle shows considerable potential for the possibility of MSR. The concept of MSBR should be revised because of molten salt reactor's advantage such as outstanding neutron economy, possibility of continuous online reprocessing and refueling, a high level of inherent safety, and economic benefit by keeping off the fuel fabrication process. For the development of MSR research, this paper provides the MSBR single-cell, two-cell and whole core model for computer code input, and several calculation results including depletion calculation of each models. The calculations are carried out by using MCNP6, a Monte Carlo computer code, which has CINDER90 for depletion calculation using ENDF-VII nuclear data. From the calculation results of various reactor design parameters, the temperature coefficients are all negative at the initial state and MTC becomes positive at the equilibrium state. From the results of core rod worth, the graphite control rod alone cannot makes the core subcritical at initial state. But the equilibrium state, the core can be made subcritical state only by graphite control rods. Through the comparison of the results of each models, the two-cell method can represent the MSBR core model more accurately with a little more computational resources than the single-cell method. Many of the thermal spectrum MSR have adopted a multi-region single-fluid strategy.

  15. Fuel Summary Report: Shippingport Light Water Breeder Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Illum, D.B.; Olson, G.L.; McCardell, R.K.

    1999-01-01

    The Shippingport Light Water Breeder Reactor (LWBR) was a small water cooled, U-233/Th-232 cycle breeder reactor developed by the Pittsburgh Naval Reactors to improve utilization of the nation's nuclear fuel resources in light water reactors. The LWBR was operated at Shippingport Atomic Power Station (APS), which was a Department of Energy (DOE) (formerly Atomic Energy Commission)-owned reactor plant. Shippingport APS was the first large-scale, central-station nuclear power plant in the United States and the first plant of such size in the world operated solely to produce electric power. The Shippingport LWBR was operated successfully from 1977 to 1982 at the APS. During the five years of operation, the LWBR generated more than 29,000 effective full power hours (EFPH) of energy. After final shutdown, the 39 core modules of the LWBR were shipped to the Expended Core Facility (ECF) at Naval Reactors Facility at the Idaho National Engineering and Environmental Laboratory (INEEL). At ECF, 12 of the 39 modules were dismantled and about 1000 of more than 17,000 rods were removed from the modules of proof-of-breeding and fuel performance testing. Some of the removed rods were kept at ECF, some were sent to Argonne National Laboratory-West (ANL-W) in Idaho and some to ANL-East in Chicago for a variety of physical, chemical and radiological examinations. All rods and rod sections remaining after the experiments were shipped back to ECF, where modules and loose rods were repackaged in liners for dry storage. In a series of shipments, the liners were transported from ECF to Idaho Nuclear Technology Engineering Center (INTEC), formerly the Idaho Chemical Processing Plant (ICPP). The 47 liners containing the fully-rodded and partially-derodded core modules, the loose rods, and the rod scraps, are now stored in underground dry wells at CPP-749.

  16. Towards an intrinsically safe and economic thorium breeder reactor

    Energy Technology Data Exchange (ETDEWEB)

    Jagannathan, V. [Light Water Reactor Physics Section, Reactor Physics Design Division, Bhabha Atomic Research Centre, 5th Floor, Central Complex, Mumbai 400085 (India)]. E-mail: vjagan@magnum.barc.ernet.in; Pal, Usha [Light Water Reactor Physics Section, Reactor Physics Design Division, Bhabha Atomic Research Centre, 5th Floor, Central Complex, Mumbai 400085 (India)

    2006-10-15

    Thorium does not have intrinsic fissile content unlike uranium. {sup 232}Th has nearly three times thermal absorption cross section compared to {sup 238}U and hence requires much larger externally fed fissile content compared to uranium based fuel. These factors give a permanent economic competitive edge to uranium. Thus thorium is not inducted in any significant measure in present day power reactors, despite the fact that thorium is three times more abundant in the earth's crust than uranium. Uranium reserves vary from country to country and there is also difficulty in having equitable distribution of uranium. Thus when {sup 235}U would get exhausted, perhaps much sooner in countries having limited uranium reserve, there will be a need to switch over from the today's open fuel cycle programme based on {sup 235}U feed to closed fuel cycle based on Pu feed. At that stage thorium and (depleted) uranium would become equal candidates to form the fertile base. All economic considerations would have to be readdressed. The size and growth of the nuclear power programme based on closed fuel cycle would be dependent on maximizing the fissile conversion rate in those reactors. In this paper we reemphasize the principles and the details of the thermal reactor concept 'A Thorium Breeder Reactor' (ATBR), in which the use of PuO{sub 2} seeded thoria fuel is found to give excellent core characteristics like two years cycle length with nearly zero control maneuvers, fairly high seed output to input ratio and intrinsically safe reactivity coefficients [Jagannathan V, Ganesan S, Karthikeyan R. Sensitivity studies for a thorium breeder reactor design with the nuclear data libraries of WIMS library update project. In: Proceedings of the international conference on emerging nuclear energy systems ICENES-2000, September 25-28, 2000, Petten, The Netherlands].

  17. Interim Report on Fluid-Fuel Thermal Breeder Reactors

    Energy Technology Data Exchange (ETDEWEB)

    MacPherson, H. G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Alexander, L. G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Carter, W. L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Chapman, R. H. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Kinyon, B. W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Miller, J. W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    1960-03-15

    The merits of aqueous-homogeneous {AHBR), graphite-moderated molten salt (MSBR) , and graphite-moderated liquid-bismuth (LBBR) breeder reactors operated at nearly comparable fuel-cycle costs (~1.5 mills/kwhr) were evaluated. The net electrical plant capability was assumed to be 1000 MwE, and the fuel and fertile streams were processed continuously on-site. The specific powers based on fuel were 1.2, 1.2, and 0.5 MwE/kg respectively, and 5.9, 3.7, and 5.3 MwE/tonne based on thorium. Net breeding ratios were 1.10, 1.07, and 1.07, giving doubling times of 5-1/2, 11, and 25 full power years . The fuel-cycle costs at the design points selected were 1.4, 1.3, and 1.6 mills/kwhr . The AHBR has an advantage in breeding ratio and doubling time because D2O is superior to graphite as a moderator in breeder reactors. MSBR has an advantage in fuel-cycle costs and in inventory of uranium in the fertile stream as a result of using a solution blanket.

  18. Multiple recycling of fuel in prototype fast breeder reactor in a closed ...

    Indian Academy of Sciences (India)

    Abstract. A fast breeder reactor (FBR) closed fuel cycle involves recycling of the discharged fuel, after reprocessing and refabrication, in order to utilize the unburnt fuel and the bred fissile material. Our previous study in this regard for the prototype fast breeder reactor (PFBR) indicated the possibility of multiple recycling with ...

  19. Multiple recycling of fuel in prototype fast breeder reactor in a closed ...

    Indian Academy of Sciences (India)

    A fast breeder reactor (FBR) closed fuel cycle involves recycling of the discharged fuel, after reprocessing and refabrication, in order to utilize the unburnt fuel and the bred fissile material. Our previous study in this regard for the prototype fast breeder reactor (PFBR) indicated the possibility of multiple recycling with ...

  20. Immediate relation of ING to fast breeder reactor programs

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, W.B

    1969-07-01

    The future large-scale use of nuclear energy is linked in the United States and other major countries to their fast breeder reactor development. Very serious basic problems have been discovered within the last two years, limiting the life in the high fast neutron flux at appropriate temperatures of materials, in particular of metals suitable for fuel cladding in sodium coolant. There is therefore a most urgent need for materials testing facilities under controlled conditions of temperature and neutron flux at sufficiently high ratings to match or surpass those required in commercially competitive fast breeder reactors. None of the test facilities yet planned for 1976 or sooner in the western world appears to match these conditions. The problem is mainly the difficulty of providing the high neutron flux effectively continuously. The spallation reaction in heavy elements was chosen as the basis of ING - the intense neutron generator, because it is the only known reaction that promises a fast neutron source density that is higher than can be controlled from the fission process. It is suggested that several countries will wish to consider urgently whether they should also explore the spallation reaction for the purpose of a fast neutron irradiation test facility. In view of the discontinuance of the ING project in Canada a favourable opportunity will exist over the next few months 10 obtain from Canada by direct personal contact details of the significant study that has been carried on for ING over the last five years. In the event that satisfactory materials are established within the lifetime of the spallation facilities they may continue to be used for the production of selected isotopes more profitably produced in high neutron fluxes. The facilities may be also used for the desirable preirradiation of thorium reactor fuel. The other research purposes planned for ING could also be served. (author)

  1. Designing a SCADA system simulator for fast breeder reactor

    Science.gov (United States)

    Nugraha, E.; Abdullah, A. G.; Hakim, D. L.

    2016-04-01

    SCADA (Supervisory Control and Data Acquisition) system simulator is a Human Machine Interface-based software that is able to visualize the process of a plant. This study describes the results of the process of designing a SCADA system simulator that aims to facilitate the operator in monitoring, controlling, handling the alarm, accessing historical data and historical trend in Nuclear Power Plant (NPP) type Fast Breeder Reactor (FBR). This research used simulation to simulate NPP type FBR Kalpakkam in India. This simulator was developed using Wonderware Intouch software 10 and is equipped with main menu, plant overview, area graphics, control display, set point display, alarm system, real-time trending, historical trending and security system. This simulator can properly simulate the principle of energy flow and energy conversion process on NPP type FBR. This SCADA system simulator can be used as training media for NPP type FBR prospective operators.

  2. Accident analysis of heavy water cooled thorium breeder reactor

    Science.gov (United States)

    Yulianti, Yanti; Su'ud, Zaki; Takaki, Naoyuki

    2015-04-01

    Thorium has lately attracted considerable attention because it is accumulating as a by-product of large scale rare earth mining. The objective of research is to analyze transient behavior of a heavy water cooled thorium breeder that is designed by Tokai University and Tokyo Institute of Technology. That is oxide fueled, PWR type reactor with heavy water as primary coolant. An example of the optimized core has relatively small moderator to fuel volume ratio (MFR) of 0.6 and the characteristics of the core are burn-up of 67 GWd/t, breeding ratio of 1.08, burn-up reactivity loss during cycles of fuel and claddings during accident are still below limitations which are in secure condition.

  3. An Evaluation of liquid metal leak detection methods for the Clinch River Breeder Reactor Plant

    Energy Technology Data Exchange (ETDEWEB)

    Morris, C.J.; Doctor, S.R.

    1977-12-01

    This report documents an independent review and evaluation of sodium leak detection methods described in the Clinch River Breeder Reactor Preliminary Safety Analysis Report. Only information in publicly available documents was used in making the assessments.

  4. Decision analysis of the Liquid Metal Fast Breeder Reactor program

    Energy Technology Data Exchange (ETDEWEB)

    Seim, E.H.

    1983-01-01

    The decision-analysis methodology is employed to develop a model to examine the Liquid Metal Fast Breeder Reactor Program to provide guidance for US decision makers. Information relative to the nuclear fuel cycle, the decision analysis technique, and the supporting economic theory is provided for background purposes. The model consists of four courses of action, three decision times, and five critical factors with either two or three paths leading to 198 possible end results. The courses of action cover a range of the possible programs to develop a commercial LMFBR including scale-up, program timing, and plant schedules. Data developed from a number of recent studies along with probability assignments from three sources are run through the model and indicate that course of action one (Compressed Full Program) produces the greatest net benefits discounted to a present value at a real rate of 5%. An analysis is included to consider the foregone costs of coal usage for electrical generation when LMFBR capacity could be available. Ranking of the courses of action does not change compared to the analysis without foregone costs. The foregone costs are approximately five times greater than the LMFBR benefits alone. Recommendations for specific actions by decision makers conclude the study.

  5. Installation of the Light-Water Breeder Reactor at the Shippingport Atomic Power Station (LWBR Development Program)

    Energy Technology Data Exchange (ETDEWEB)

    Massimino, R.J.; Williams, D.A.

    1983-05-01

    This report summarizes the refueling operations performed to install a Light Water Breeder Reactor (LWBR) core into the existing pressurized water reactor vessel at the Shippingport Atomic Power Station. Detailed descriptions of the major installation operations (e.g., primary system preconditioning, fuel installation, pressure boundary seal welding) are included as appendices to this report; these operations are of technical interest to any reactor servicing operation, whether the reactor is a breeder or a conventional light water non-breeder core.

  6. Steam condenser optimization using Real-parameter Genetic Algorithm for Prototype Fast Breeder Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Jayalal, M.L., E-mail: jayalal@igcar.gov.in [Indira Gandhi Centre for Atomic Research, Kalpakkam 603102, Tamil Nadu (India); Kumar, L. Satish, E-mail: satish@igcar.gov.in [Indira Gandhi Centre for Atomic Research, Kalpakkam 603102, Tamil Nadu (India); Jehadeesan, R., E-mail: jeha@igcar.gov.in [Indira Gandhi Centre for Atomic Research, Kalpakkam 603102, Tamil Nadu (India); Rajeswari, S., E-mail: raj@igcar.gov.in [Indira Gandhi Centre for Atomic Research, Kalpakkam 603102, Tamil Nadu (India); Satya Murty, S.A.V., E-mail: satya@igcar.gov.in [Indira Gandhi Centre for Atomic Research, Kalpakkam 603102, Tamil Nadu (India); Balasubramaniyan, V.; Chetal, S.C. [Indira Gandhi Centre for Atomic Research, Kalpakkam 603102, Tamil Nadu (India)

    2011-10-15

    Highlights: > We model design optimization of a vital reactor component using Genetic Algorithm. > Real-parameter Genetic Algorithm is used for steam condenser optimization study. > Comparison analysis done with various Genetic Algorithm related mechanisms. > The results obtained are validated with the reference study results. - Abstract: This work explores the use of Real-parameter Genetic Algorithm and analyses its performance in the steam condenser (or Circulating Water System) optimization study of a 500 MW fast breeder nuclear reactor. Choice of optimum design parameters for condenser for a power plant from among a large number of technically viable combination is a complex task. This is primarily due to the conflicting nature of the economic implications of the different system parameters for maximizing the capitalized profit. In order to find the optimum design parameters a Real-parameter Genetic Algorithm model is developed and applied. The results obtained are validated with the reference study results.

  7. Cellular convection in vertical annuli of fast breeder reactors

    Energy Technology Data Exchange (ETDEWEB)

    Hemanath, M.G. [Fast Reactor Technology Group, Indira Gandhi Center for Atomic Research, Kalpakkam (India)], E-mail: hemanath@igcar.gov.in; Meikandamurthy, C.; Ramakrishnan, V.; Rajan, K.K.; Rajan, M.; Vaidyanathan, G. [Fast Reactor Technology Group, Indira Gandhi Center for Atomic Research, Kalpakkam (India)

    2007-08-15

    In the pool type fast reactors the roof structure is penetrated by a number of pumps and heat exchangers that are cylindrical in shape. Sandwiched between the free surface of sodium and the roof structure, is stagnant argon gas, which can flow in the annular space between the components and roof structure, as a thermosyphon. These thermosyphons not only transport heat from sodium to roof structure, but also result in cellular convection in vertical annuli resulting in circumferential temperature asymmetry of the penetrating components. There is need to know the temperature asymmetry as it can cause tilting of the components. Experiments were carried out in an annulus model to predict the circumferential temperature difference with and without sodium in the test vessel. Three-dimensional analysis was also carried out using PHOENICS CFD code and compared with the experiment. This paper describes the experimental details, the theoretical analysis and their comparison.

  8. Multiple recycling of fuel in prototype fast breeder reactor

    Indian Academy of Sciences (India)

    In the FBR closed fuel cycle, possibility of multi-recycle has been recognized. In the present study, Pu-239 equivalence approach is used to demonstrate the feasibility of achieving near constant input inventory of Pu and near stable Pu isotopic composition after a few recycles of the same fuel of the prototype fast breeder ...

  9. Status of EC solid breeder blanket designs and R and D for demo fusion reactors

    Energy Technology Data Exchange (ETDEWEB)

    Proust, E. [CEA Centre d`Etudes de Saclay, 91 - Gif-sur-Yvette (France). Dept. de Mecanique et de Technologie; Dalle Donne, M. [Kernforschungszentrum Karlsruhe GmbH (Germany); Anzidei, L. [ENEA, Frascati (Italy). Centro Ricerche Energia; Kwast, H. [Netherlands Energy Research Foundation (ECN), Petten (Netherlands); Moons, F. [Centre d`Etude de l`Energie Nucleaire, Mol (Belgium)

    1994-12-31

    Within the European Community Fusion Technology Program two solid breeder blankets for a DEMO reactor are being developed. The two blankets have various features in common: helium as coolant and as tritium purge gas, the martensitic steel MANET as structural material and beryllium as neutron multiplier. The configurations of the two blankets are however different: in the B.I.T. (Breeder Inside Tube) concept the breeder materials are LiAlO{sub 2} or Li{sub 2}ZrO{sub 3} in the form of annular pellets contained in tubes surrounded by beryllium blocks, the coolant helium being outside the tubes, whereas in the B.O.T. (Breeder out of Tube) the breeder and multiplier material are Li{sub 4}SiO{sub 4} and beryllium pebbles forming a mixed bed placed outside the tubes containing the coolant helium. The main critical issues for both blankets are the behavior of the breeder ceramics and of beryllium under irradiation and the tritium control. Other issues are the low temperature irradiation induced embrittlement of MANET, the mechanical effects caused by major plasma disruptions, and safety and reliability. The R and D work concentrate on these issues. The development of martensitic steels including MANET is part of a separate program. Breeder ceramics and beryllium irradiations have been so far performed for conditions which do not cover the peak values injected in the DEMO blankets. Further irradiations in thermal reactors and in fast reactors, especially for beryllium, are required. An effective tritium control requires the development of permeation barriers and/or of methods of oxidation of the tritium in the main helium cooling systems. First promising results have been obtained also in field of mechanical effects from plasma disruptions and safety and reliability, however further work is required in the reliability field and to validate the codes for the calculations of the plasma disruption effects. (authors). 8 figs., 2 tabs., 53 refs.

  10. Atoms in Appalachia. Historical report on the Clinch River Breeder Reactor site

    Energy Technology Data Exchange (ETDEWEB)

    Schaffer, D

    1982-01-01

    The background information concerning the acquisition of the land for siting the Clinch River Breeder Reactor is presented. Historical information is also presented concerning the land acquisition for the Oak Ridge facilities known as the Manhattan Project during World War II.

  11. Engineering review of the core support structure of the Gas Cooled Fast Breeder Reactor

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-09-01

    The review of the core support structure of the gas cooled fast breeder reactor (GCFR) covered such areas as the design criteria, the design and analysis of the concepts, the development plan, and the projected manufacturing costs. Recommendations are provided to establish a basis for future work on the GCFR core support structure.

  12. Nuclear Engineering Computer Modules, Thermal-Hydraulics, TH-2: Liquid Metal Fast Breeder Reactors.

    Science.gov (United States)

    Reihman, Thomas C.

    This learning module is concerned with the temperature field, the heat transfer rates, and the coolant pressure drop in typical liquid metal fast breeder reactor (LMFBR) fuel assemblies. As in all of the modules of this series, emphasis is placed on developing the theory and demonstrating the use with a simplified model. The heart of the module is…

  13. Economic Assessment of Russian Nuclear Strategies on the Basis of Fast Breeder Reactors

    Directory of Open Access Journals (Sweden)

    O. V. Marchenko

    2013-01-01

    Full Text Available The paper assesses the economic risk caused by the delay in commissioning innovative nuclear power plants with fast breeder reactors in Russia. The risk is quantitatively measured by the excessive costs for energy development and the possibility of implementing the considered variants that differ in power consumption, technical and economic indices of the reactors, and constraints on CO2 emissions. The probability distribution functions of economic losses for different strategies of nuclear energy development are constructed.

  14. A FAST BREEDER REACTOR SPENT FUEL MEASUREMENTS PROGRAM FOR BN-350 REACTOR

    Energy Technology Data Exchange (ETDEWEB)

    P. STAPLES; J. HALBIG; ET AL

    1999-04-01

    A project to verify the fissile content of fast breeder reactor spent nuclear fuel is underway in the Republic of Kasakhstan. There are a variety of assembly types with different irradiation histories and profiles in the reactor that require a variety of measurement and analysis procedures. These procedures will be discussed and compared as will the general process that has been designed to resolve any potential measurement discrepancies. The underwater counter is part of a system that is designed to assist the International Atomic Energy Agency (IAEA) in maintaining continuity of knowledge from the time of measurement until the measured item is placed in a welded container with a unique identification. In addition to satisfying IAEA requirements for the spent nuclear fuel, this measurement program is able to satisfy some of the measurement requirements for the Kasakhstan Atomic Energy Agency concerning the repackaging of the spent nuclear fuel into a standard canister. The project is currently operational in a mode requiring the IAEA's continuous presence.

  15. Helium Leak Detection of Vessels in Fuel Transfer Cell (FTC) of Prototype Fast Breeder Reactor (PFBR)

    Science.gov (United States)

    Dutta, N. G.

    2012-11-01

    Bharatiya Nabhikiya Vidyut Nigam (BHAVINI) is engaged in construction of 500MW Prototype Fast Breeder Reactor (PFBR) at Kalpak am, Chennai. In this very important and prestigious national programme Special Product Division (SPD) of M/s Kay Bouvet Engg.pvt. ltd. (M/s KBEPL) Satara is contributing in a major way by supplying many important sub-assemblies like- Under Water trolley (UWT), Airlocks (PAL, EAL) Container and Storage Rack (CSR) Vessels in Fuel Transfer Cell (FTC) etc for PFBR. SPD of KBEPL caters to the requirements of Government departments like - Department of Atomic Energy (DAE), BARC, Defense, and Government undertakings like NPCIL, BHAVINI, BHEL etc. and other precision Heavy Engg. Industries. SPD is equipped with large size Horizontal Boring Machines, Vertical Boring Machines, Planno milling, Vertical Turret Lathe (VTL) & Radial drilling Machine, different types of welding machines etc. PFBR is 500 MWE sodium cooled pool type reactor in which energy is produced by fissions of mixed oxides of Uranium and Plutonium pellets by fast neutrons and it also breeds uranium by conversion of thorium, put along with fuel rod in the reactor. In the long run, the breeder reactor produces more fuel then it consumes. India has taken the lead to go ahead with Fast Breeder Reactor Programme to produce electricity primarily because India has large reserve of Thorium. To use Thorium as further fuel in future, thorium has to be converted in Uranium by PFBR Technology.

  16. Gas core reactors for actinide transmutation and breeder applications. Annual report

    Energy Technology Data Exchange (ETDEWEB)

    Clement, J.D.; Rust, J.H.

    1978-04-01

    This work consists of design power plant studies for four types of reactor systems: uranium plasma core breeder, uranium plasma core actinide transmuter, UF6 breeder and UF6 actinide transmuter. The plasma core systems can be coupled to MHD generators to obtain high efficiency electrical power generation. A 1074 MWt UF6 breeder reactor was designed with a breeding ratio of 1.002 to guard against diversion of fuel. Using molten salt technology and a superheated steam cycle, an efficiency of 39.2% was obtained for the plant and the U233 inventory in the core and heat exchangers was limited to 105 Kg. It was found that the UF6 reactor can produce high fluxes (10 to the 14th power n/sq cm-sec) necessary for efficient burnup of actinide. However, the buildup of fissile isotopes posed severe heat transfer problems. Therefore, the flux in the actinide region must be decreased with time. Consequently, only beginning-of-life conditions were considered for the power plant design. A 577 MWt UF6 actinide transmutation reactor power plant was designed to operate with 39.3% efficiency and 102 Kg of U233 in the core and heat exchanger for beginning-of-life conditions.

  17. Multiple recycling of fuel in prototype fast breeder reactor

    Indian Academy of Sciences (India)

    Abstract. In a thermal neutron reactor, multiple recycle of U–Pu fuel is not possible due to degradation of fissile content of Pu in just one recycle. In the FBR closed fuel cycle, possibility of multi-recycle has been recognized. In the present study, Pu-239 equivalence approach is used to demonstrate the feasibility of achieving ...

  18. Uncertainty evaluation of reliability of shutdown system of a medium size fast breeder reactor

    Energy Technology Data Exchange (ETDEWEB)

    Zeliang, Chireuding; Singh, Om Pal, E-mail: singhop@iitk.ac.in; Munshi, Prabhat

    2016-11-15

    Highlights: • Uncertainty analysis of reliability of Shutdown System is carried out. • Monte Carlo method of sampling is used. • The effect of various reliability improvement measures of SDS are accounted. - Abstract: In this paper, results are presented on the uncertainty evaluation of the reliability of Shutdown System (SDS) of a Medium Size Fast Breeder Reactor (MSFBR). The reliability analysis results are of Kumar et al. (2005). The failure rate of the components of SDS are taken from International literature and it is assumed that these follow log-normal distribution. Fault tree method is employed to propagate the uncertainty in failure rate from components level to shutdown system level. The beta factor model is used to account different extent of diversity. The Monte Carlo sampling technique is used for the analysis. The results of uncertainty analysis are presented in terms of the probability density function, cumulative distribution function, mean, variance, percentile values, confidence intervals, etc. It is observed that the spread in the probability distribution of SDS failure rate is less than SDS components failure rate and ninety percent values of the failure rate of SDS falls below the target value. As generic values of failure rates are used, sensitivity analysis is performed with respect to failure rate of control and safety rods and beta factor. It is discovered that a large increase in failure rate of SDS rods is not carried to SDS system failure proportionately. The failure rate of SDS is very sensitive to the beta factor of common cause failure between the two systems of SDS. The results of the study provide insight in the propagation of uncertainty in the failure rate of SDS components to failure rate of shutdown system.

  19. The manufacture of enriched uranium fuel slugs for the Experimental Breeder Reactor.

    Energy Technology Data Exchange (ETDEWEB)

    Shuck, Author B.

    1953-04-20

    This report describes the specifications, materials and the sequence of operations used to found and fabricate 4 the first charge of enriched uranium fuel in the Experimental Breeder Reactor. The work was governed by the following principles: a. That the fuel be of correct composition, dimension and metallurgical condition for use in the reactor. b. That a maximum yield of finished fuel slugs from the quantity of uranium available for the program be achieved. c. That the residues be in a form which can be recovered by chemical or other means. d. That a detailed record be kept in such form that a complete history of each fuel slug be available.

  20. Investigation of zero-release cycle using fast breeder reactor

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-11-01

    The task force was organized for the main purpose of offering quantitative basic data to the study group on nuclear fuel cycle in February, 1997. The effect of so-called frontier technologies such as the isotope separation by laser method, the FP annihilation with electron beam accelerators and so on in the FBR cycle based on MOX fuel and PUREX reprocessing method was expected. It is aimed at to recycle the total amount of minor actinides. The object of recycling is the nuclides which contribute largely to toxicity, namely 11 elements, 12 nuclides. The preconditions and the target to be attained of the investigation are explained. As the results of investigation, the amount of reloading MA and FP into a reactor, squeezing the recycling scenario, the effect of reducing toxicity and the subject of the countermeasures to the nuclides with long half-life which cannot be reloaded are reported. As the technical evaluation required for realizing the concept, the concept of the core which excludes recriticality, the advance of reprocessing technology, isotope separation, the fabrication into the optimal form for recycling and so on are discussed. The economical efficiency of the recycling based on MOX and PUREX and the proposal of the development scenario are described. (K.I.)

  1. Choice of rotatable plug seals for prototype fast breeder reactor: Review of historical perspectives

    Energy Technology Data Exchange (ETDEWEB)

    Sinha, N.K., E-mail: nksinha@igcar.gov.in; Raj, Baldev, E-mail: baldev.dr@gmail.com

    2015-09-15

    Highlights: • Choice and arrangement of elastomeric inflatable and backup seals as primary and secondary barriers. • With survey (mid-1930s onwards) of reactor, sealing, R&D and rubber technology. • Load, reliability, safety, life and economy of seals and reactors are key factors. • PFBR blends concepts and experience of MOX fuelled FBRs with original solutions. • R&D indicates inflatable seal advanced fluoroelastomer pivotal in unifying nuclear sealing. - Abstract: Choice and arrangement of elastomeric primary inflatable and secondary backup seals for the rotatable plugs (RPs) of 500 MW (e), sodium cooled, pool type, 2-loop, mixed oxide (MOX) fuelled Prototype Fast Breeder Reactor (PFBR) is depicted with review of various historical perspectives. Static and dynamic operation, largest diameters (PFBR: ∼6.4 m, ∼4.2 m), widest gaps and variations (5 ± 2 mm) and demanding operating requirements make RP openings on top shield (TS) the most difficult to seal which necessitated extensive development from 1950s to early 1990s. Liquid metal freeze seals with life equivalent to reactor prevailed as primary barrier (France, Japan, U.S.S.R.) during pre-1980s in spite of bulk, cost and complexity due to the abilities to meet zero leakage and resist core disruptive accident (CDA). Redefinition of CDA as beyond design basis accident, tolerable leakage and enhanced economisation drive during post-1980s established elastomeric inflatable seal as primary barrier excepting in U.S.S.R. (MOX fuel, freeze seal) and U.S.A. (metallic fuel). Choice of inflatable seal for PFBR RPs considers these perspectives, inherent advantages of elastomers and those of inflatable seals which maximise seal life. Choice of elastomeric backup seal as secondary barrier was governed by reliability and minimisation as well as distribution of load (temperature, radiation, mist) to maximise seal life. The compact sealing combination brings the hanging RPs at about the same elevation to reduce

  2. Review of ORNL-TSF shielding experiments for the gas-cooled Fast Breeder Reactor Program

    Energy Technology Data Exchange (ETDEWEB)

    Abbott, L.S.; Ingersoll, D.T.; Muckenthaler, F.J.; Slater, C.O.

    1982-01-01

    During the period between 1975 and 1980 a series of experiments was performed at the ORNL Tower Shielding Facility in support of the shield design for a 300-MW(e) Gas Cooled Fast Breeder Demonstration Plant. This report reviews the experiments and calculations, which included studies of: (1) neutron streaming in the helium coolant passageways in the GCFR core; (2) the effectiveness of the shield designed to protect the reactor grid plate from radiation damage; (3) the adequacy of the radial shield in protecting the PCRV (prestressed concrete reactor vessel) from radiation damage; (4) neutron streaming between abutting sections of the radial shield; and (5) the effectiveness of the exit shield in reducing the neutron fluxes in the upper plenum region of the reactor.

  3. Preliminary design of a Binary Breeder Reactor; Diseno preliminar de un reactor esferico de quema/cria

    Energy Technology Data Exchange (ETDEWEB)

    Garcia C, E. Y.; Francois, J. L.; Lopez S, R. C., E-mail: eliasgarcerv@hotmail.com [UNAM, Facultad de Ingenieria, Departamento de Sistemas Energeticos, Paseo Cuauhnahuac No. 8532, 62550 Jiutepec, Morelos (Mexico)

    2014-10-15

    A binary breeder reactor (BBR) is a reactor that by means of the transmutation and fission process can operates through the depleted uranium burning with a small quantity of fissile material. The advantages of a BBR with relation to other nuclear reactor types are numerous, taking into account their capacity to operate for a long time without requiring fuel reload or re-arrangement. In this work four different simulations are shown carried out with the MCNPX code with libraries Jeff-3.1 to 1200 K. The objective of this study is to compare two different models of BBR: a spherical reactor and a cylindrical one, using two fuel cycles for each one of them (U-Pu and Th-U) and different reflectors for the two different geometries. For all the models a super-criticality state was obtained at least 10.9 years without carrying out some fuel re-arrangement or reload. The plutonium-239 production was achieved in the models where natural uranium was used in the breeding area, while the production of uranium-233 was observed in the cases where thorium was used in the fertile area. Finally, a behavior of stationary wave reactor was observed inside the models of spherical reactor when contemplating the power uniform increment in the breeding area, while inside the cylindrical models was observed the behavior of a traveling wave reactor when registering the displacement of the burnt wave along the cylindrical model. (Author)

  4. Large scale breeder reactor plant prototype mechanical pump conceptual design study

    Energy Technology Data Exchange (ETDEWEB)

    1976-07-01

    This final report is a complete conceptual design study of a mechanical pump for a large scale breeder reactor plant. The pumps are located in the cold leg side of the loops. This makes the net positive suction head available - NPSHA - low, and is, in fact, a major influencing factor in the design. Where possible, experience gained from the Clinch River Project and the FFTF is used in this study. Experience gained in the design, manufacturer, and testing of pumps in general and sodium pumps in particular is reflected in this report. The report includes estimated cost and time schedule for design, manufacture, and testing. It also includes a recommendation for development needs.

  5. The long-term future for civilian nuclear power generation in France: The case for breeder reactors. Breeder reactors: The physical and physical chemistry parameters, associate material thermodynamics and mechanical engineering: Novelties and issues

    Science.gov (United States)

    Dautray, Robert

    2011-06-01

    The author firstly gives a summary overview of the knowledge base acquired since the first breeder reactors became operational in the 1950s. "Neutronics", thermal phenomena, reactor core cooling, various coolants used and envisioned for this function, fuel fabrication from separated materials, main equipment (pumps, valves, taps, waste cock, safety circuits, heat exchange units, etc.) have now attained maturity, sufficient to implement sodium cooling circuits. Notwithstanding, the use of metallic sodium still raises certain severe questions in terms of safe handling (i.e. inflammability) and other important security considerations. The structural components, both inside the reactor core and outside (i.e. heat exchange devices) are undergoing in-depth research so as to last longer. The fuel cycle, notably the refabrication of fuel elements and fertile elements, the case of transuranic elements, etc., call for studies into radiation induced phenomena, chemistry separation, separate or otherwise treatments for materials that have different radioactive, physical, thermodynamical, chemical and biological properties. The concerns that surround the definitive disposal of certain radioactive wastes could be qualitatively improved with respect to the pressurized water reactors (PWRs) in service today. Lastly, the author notes that breeder reactors eliminate the need for an isotope separation facility, and this constitutes a significant contribution to contain nuclear proliferation. Among the priorities for a fully operational system (power station - the fuel cycle - operation-maintenance - the spent fuel pool and its cooling system-emergency cooling system-emergency electric power-transportation movements-equipment handling - final disposal of radioactive matter, independent safety barriers), the author includes materials (fabrication of targets, an irradiation and inspection instrument), the chemistry of all sorting processes, equipment "refabrication" or rehabilitation

  6. Instrumentation and control system for the prototype fast breeder reactor 'MONJU' power station

    Energy Technology Data Exchange (ETDEWEB)

    Hara, Hiroshi (Power Reactor and Nuclear Fuel Development Corp., Tokyo (Japan)); Mae, Yoshinori; Ishida, Takayuki; Hashiura, Kazuhiko; Kasai, Shozo; Yamamoto, Hajime

    1989-10-01

    The fast breeder reactor 'Monju' power station is constructed as the nuclear power station of next generation in Tsuruga City, Fukui Prefecture. In order to realize high safety and operational reliability as the newest nuclear power station, the measurement and control system of Monju (electric power output 280 MW) has been designed and manufactured by reflecting the experiences of construction and operation of the experimental FBR 'Joyo' and the results of various research and development of sodium instrumentation and others, and by using the latest digital control technology and multiplexing system technology. In this paper, the results of development of the characteristic measurement and control technology as fast breeder reactors and the state of application to the measurement and control system which was designed and manufactured for Monju are described. Central monitoring panel, plant control system, sodium instrumentation, preheating control system and so on are reported. In the case of Monju, the heat capacity and thermal inertia of the primary and secondary cooling systems are large, and the system comprises three loops. (K.I.).

  7. Review of uncertainty estimates associated with models for assessing the impact of breeder reactor radioactivity releases

    Energy Technology Data Exchange (ETDEWEB)

    Miller, C.; Little, C.A.

    1982-08-01

    The purpose is to summarize estimates based on currently available data of the uncertainty associated with radiological assessment models. The models being examined herein are those recommended previously for use in breeder reactor assessments. Uncertainty estimates are presented for models of atmospheric and hydrologic transport, terrestrial and aquatic food-chain bioaccumulation, and internal and external dosimetry. Both long-term and short-term release conditions are discussed. The uncertainty estimates presented in this report indicate that, for many sites, generic models and representative parameter values may be used to calculate doses from annual average radionuclide releases when these calculated doses are on the order of one-tenth or less of a relevant dose limit. For short-term, accidental releases, especially those from breeder reactors located in sites dominated by complex terrain and/or coastal meteorology, the uncertainty in the dose calculations may be much larger than an order of magnitude. As a result, it may be necessary to incorporate site-specific information into the dose calculation under these circumstances to reduce this uncertainty. However, even using site-specific information, natural variability and the uncertainties in the dose conversion factor will likely result in an overall uncertainty of greater than an order of magnitude for predictions of dose or concentration in environmental media following shortterm releases.

  8. Optimization of material and production to develop fluoroelastomer inflatable seals for sodium cooled fast breeder reactor

    Energy Technology Data Exchange (ETDEWEB)

    Sinha, N.K., E-mail: nksinha@igcar.gov.i [Indira Gandhi Centre for Atomic Research (IGCAR), Department of Atomic Energy (DAE), Kalpakkam, Tamilnadu 603102 (India); Raj, Baldev, E-mail: dir@igcar.gov.i [Indira Gandhi Centre for Atomic Research (IGCAR), Department of Atomic Energy (DAE), Kalpakkam, Tamilnadu 603102 (India)

    2011-03-15

    Research highlights: Production of thin fluoroelastomer profiles by cold feed extrusion and continuous cure involving microwave and hot air heating. Use of peroxide curing in air during production. Use of fluoroelastomers based on advanced polymer architecture (APA) for the production of profiles. Use of the profiles in inflatable seals for critical application of Prototype Fast Breeder Reactor. Tailoring of material formulation by synchronized optimization of material and production technologies to ensure that the produced seal ensures significant gains in terms of performance and safety in reactor under synergistic influences of temperature, radiation, air and sodium aerosol. - Abstract: The feasibility of producing thin-walled fluoroelastomer profiles under continuous, atmospheric-pressure vulcanization conditions in air has been demonstrated by successful manufacture of {approx}2 m diameter test inflatable seals for the 500 MWe, Prototype Fast Breeder Reactor (PFBR) using a 50/50 blend formulation of Viton GBL-200S/600S based on advanced polymer architecture (APA). A commercial cold feed screw extruder with 90 mm diameter screw was used along with continuous cure by microwave (2.45 GHz) and hot air heating (190 {sup o}C) at a line speed of 1 m/min to produce the seals. The blend formulation promises significant improvement in the performance and safety of the seals. This article depicts the relevant characteristics of the original inflatable seal compound that was used as reference to achieve the objectives through synchronized optimization of material and production technologies. The production trials are outlined and the blend formulation used with minor factory modifications to produce the test seals is reported. Progressive refinements of the original, Viton A-401C based compound to the blend formulation is presented along with an assessment of potential performance gains. Possible uses of the reported formulation and production technique for other large

  9. Passive compact molten salt reactor (PCMSR), modular thermal breeder reactor with totally passive safety system

    Science.gov (United States)

    Harto, Andang Widi

    2012-06-01

    Design Study Passive Compact Molten Salt Reactor (PCMSR) with totally passive safety system has been performed. The term of Compact in the PCMSR name means that the reactor system is designed to have relatively small volume per unit power output by using modular and integral concept. In term of modular, the reactor system consists of three modules, i.e. reactor module, turbine module and fuel management module. The reactor module is an integral design that consists of reactor, primary and intermediate heat exchangers and passive post shutdown cooling system. The turbine module is an integral design of a multi heating, multi cooling, regenerative gas turbine. The fuel management module consists of all equipments related to fuel preparation, fuel reprocessing and radioactive handling. The preliminary calculations show that the PCMSR has negative temperature and void reactivity coefficient, passive shutdown characteristic related to fuel pump failure and possibility of using natural circulation for post shutdown cooling system.

  10. Compendium of computer codes for the safety analysis of fast breeder reactors

    Energy Technology Data Exchange (ETDEWEB)

    1977-10-01

    The objective of the compendium is to provide the reader with a guide which briefly describes many of the computer codes used for liquid metal fast breeder reactor safety analyses, since it is for this system that most of the codes have been developed. The compendium is designed to address the following frequently asked questions from individuals in licensing and research and development activities: (1) What does the code do. (2) To what safety problems has it been applied. (3) What are the code's limitations. (4) What is being done to remove these limitations. (5) How does the code compare with experimental observations and other code predictions. (6) What reference documents are available.

  11. Clinch River Breeder Reactor Plant Steam Generator Few Tube Test model post-test examination

    Energy Technology Data Exchange (ETDEWEB)

    Impellezzeri, J.R.; Camaret, T.L.; Friske, W.H.

    1981-03-11

    The Steam Generator Few Tube Test (FTT) was part of an extensive testing program carried out in support of the Clinch River Breeder Reactor Plant (CRBRP) steam generator design. The testing of full-length seven-tube evaporator and three-tube superheater models of the CRBRP design was conducted to provide steady-state thermal/hydraulic performance data to full power per tube and to verify the absence of multi-year endurance problems. This paper describes the problems encountered with the mechanical features of the FTT model design which led to premature test termination, and the results of the post-test examination. Conditions of tube bowing and significant tube and tube support gouging was observed. An interpretation of the visual and metallurgical observations is also presented. The CRBRP steam generator has undergone design evaluations to resolve observed deficiences found in the FFTM.

  12. Acoustic monitoring of sodium boiling in a liquid metal fast breeder reactor from autoregressive models

    Energy Technology Data Exchange (ETDEWEB)

    Geraldo, Issa Cherif [Laboratoire d’Automatique, Génie Informatique et Signal (LAGIS UMR CNRS 8219), Université Lille 1, Sciences et technologies, Avenue Paul Langevin, BP 48, 59651 Villeneuve d’Ascq CEDEX (France); Bose, Tanmoy [Indian Institute of Technology Kharagpur, Kharagpur 721302, West Bengal (India); Pekpe, Komi Midzodzi, E-mail: midzodzi.pekpe@univ-lille1.fr [Laboratoire d’Automatique, Génie Informatique et Signal (LAGIS UMR CNRS 8219), Université Lille 1, Sciences et technologies, Avenue Paul Langevin, BP 48, 59651 Villeneuve d’Ascq CEDEX (France); Cassar, Jean-Philippe [Laboratoire d’Automatique, Génie Informatique et Signal (LAGIS UMR CNRS 8219), Université Lille 1, Sciences et technologies, Avenue Paul Langevin, BP 48, 59651 Villeneuve d’Ascq CEDEX (France); Mohanty, A.R. [Indian Institute of Technology Kharagpur, Kharagpur 721302, West Bengal (India); Paumel, Kévin [CEA, DEN, Nuclear Technology Department, F-13108 Saint-Paul-lez-Durance (France)

    2014-10-15

    Highlights: • The work deals with sodium boiling detection in a liquid metal fast breeder reactor. • The authors choose to use acoustic data instead of thermal data. • The method is designed to not to be disturbed by the environment noises. • A real time boiling detection methods are proposed in the paper. - Abstract: This paper deals with acoustic monitoring of sodium boiling in a liquid metal fast breeder reactor (LMFBR) based on auto regressive (AR) models which have low computational complexities. Some authors have used AR models for sodium boiling or sodium–water reaction detection. These works are based on the characterization of the difference between fault free condition and current functioning of the system. However, even in absence of faults, it is possible to observe a change in the AR models due to the change of operating mode of the LMFBR. This sets up the delicate problem of how to distinguish a change in operating mode in absence of faults and a change due to presence of faults. In this paper we propose a new approach for boiling detection based on the estimation of AR models on sliding windows. Afterwards, classification of the models into boiling or non-boiling models is made by comparing their coefficients by two statistical methods, multiple linear regression (LR) and support vectors machines (SVM). The proposed approach takes into account operating mode information in order to avoid false alarms. Experimental data include non-boiling background noise data collected from Phenix power plant (France) and provided by the CEA (Commissariat à l’Energie Atomique et aux énergies alternatives, France) and boiling condition data generated in laboratory. High boiling detection rates as well as low false alarms rates obtained on these experimental data show that the proposed method is efficient for boiling detection. Most importantly, it shows that the boiling phenomenon introduces a disturbance into the AR models that can be clearly detected.

  13. The long-term future for civilian nuclear power generation in France: The case for breeder reactors. Breeder reactors: The physical and physical chemistry parameters, associate material thermodynamics and mechanical engineering: Novelties and issues; La production d'electricite d'origine nucleaire en France, dans le futur a long terme: Le cas des surgenerateurs: Les reacteurs nucleaires surgenerateurs: Les parametres physique et physico-chimiques, la thermodynamique associee des materiaux et de l'ingenierie mecanique: Nouveautes et options

    Energy Technology Data Exchange (ETDEWEB)

    Dautray, R. [Academie des sciences, 23, quai de Conti, 75270 Paris cedex 06 (France)

    2011-06-15

    The author gives a summary overview of the knowledge base acquired since the first breeder reactors became operational in the fifties. Neutron transport theory, thermal phenomena, reactor core cooling, various coolants used and envisioned for this function, fuel fabrication from separated materials, main equipment (pumps, valves, heat exchanges...) have now attained maturity, sufficient to implement sodium cooling circuits. However, the use of metallic sodium still raises certain severe questions in terms of safe handling and security considerations. The structural components, both inside the reactor core and outside (i.e. heat exchangers) are undergoing in-depth research so as to last longer. The fuel cycle, notably the re-fabrication of fuel elements and fertile elements, the case of transuranic elements, etc., call for studies into radiation induced phenomena, chemistry separation, separate or otherwise treatments for materials that have different radioactive, physical, thermodynamical, chemical and biological properties. The concerns that surround the definitive disposal of certain radioactive wastes could be qualitatively improved with respect to the pressurized water reactors (PWRs) in service today. Lastly, the author notes that breeder reactors eliminate the need for an isotope separation facility, and this constitutes a significant contribution to contain nuclear proliferation. France was in the forefront of nuclear breeder power generation science, technological research and also in the knowledge base related to breeder reactors. It is in the country's interest to pursue these efforts. (author)

  14. Advanced automation concepts applied to Experimental Breeder Reactor-II startup

    Energy Technology Data Exchange (ETDEWEB)

    Berkan, R.C.; Upadhyaya, B.R.; Bywater, R.L. (Tennessee Univ., Knoxville, TN (United States). Dept. of Nuclear Engineering); Kisner, R.A. (Oak Ridge National Lab., TN (United States))

    1991-08-01

    The major objective of this work is to demonstrate through simulations that advanced liquid-metal reactor plants can be operated from low power by computer control. Development of an automatic control system with this objective will help resolve specific issues and provide proof through demonstration that automatic control for plant startup is feasible. This paper presents an advanced control system design for startup of the Experimental Breeder Reactor-2 (EBR-2) located at Idaho Falls, Idaho. The design incorporates recent methods in nonlinear control with advanced diagnostics techniques such as neural networks to form an integrated architecture. The preliminary evaluations are obtained in a simulated environment by a low-order, valid nonlinear model. Within the framework of phase 1 research, the design includes an inverse dynamics controller, a fuzzy controller, and an artificial neural network controller. These three nonlinear control modules are designed to follow the EBR-2 startup trajectories in a multi-input/output regime. They are coordinated by a supervisory routine to yield a fault-tolerant, parallel operation. The control system operates in three modes: manual, semiautomatic, and fully automatic control. The simulation results of the EBR-2 startup transients proved the effectiveness of the advanced concepts. The work presented in this paper is a preliminary feasibility analysis and does not constitute a final design of an automated startup control system for EBR-2. 14 refs., 43 figs.

  15. A ceramic breeder in a poloidal tube blanket for a tokamak reactor

    Energy Technology Data Exchange (ETDEWEB)

    Amici, A.; Anzidei, L.; Gallina, M.; Rado, V.; Simbolotti, G.; Violante, V.; Zampaglione, V.; Petrizzi, L. (Associazione Euratom-CNEN sulla Fusione, Centro di Frascati (Italy))

    1989-04-01

    A conceptual study of a helium-cooled solid breeder blanket for a tokamak reactor is presented. Tritium breeding capability together with system reliability are taken as the main design criteria. The blanket consists of tubular poloidal modules made of a central bundle of ceramic rods ({gamma}LiAlO/sub 2/) with a coaxial distribution of the inlet/outlet coolant flow (He) surrounded by a multiplier material (Be) in the form of bored bricks. The Be to {gamma}LiAlO/sub 2/ volume ratio is 4/1. The He inlet and outlet branches are cooling Be and {gamma}LiAlO/sub 2/, respectively. A purge He flow running through small central holes of the ceramic rods is derived from the main flow. Under the typical conditions of a tokamak reactor (neutron wall load=2 MW/m/sup 2/), a full coverage tritium breeding ratio of 1.47 is achieved for the following design and operating parameters: outlet He temperature=570/sup 0/C; inlet He temperature=250/sup 0/; total extracted power=2700 MW; He pumping power percentage=2%; minimum/maximum {gamma}LiAlO/sub 2/ temperature=400/900/sup 0/C; maximum structural temperature=475/sup 0/C; and maximum Be temperature=525/sup 0/C. (orig.).

  16. Evaluation of the Initial Isothermal Physics Measurements at the Fast Flux Test Facility, a Prototypic Liquid Metal Fast Breeder Reactor

    Energy Technology Data Exchange (ETDEWEB)

    John D. Bess

    2010-03-01

    The Fast Flux Test Facility (FFTF) was a 400-MWt, sodium-cooled, low-pressure, high-temperature, fast-neutron flux, nuclear fission reactor plant designed for the irradiation testing of nuclear reactor fuels and materials for the development of liquid metal fast breeder reactors (LMFBRs). The FFTF was fueled with plutonium-uranium mixed oxide (MOX) and reflected by Inconel-600. Westinghouse Hanford Company operated the FFTF as part of the Hanford Engineering Development Laboratory (HEDL) for the U.S. Department of Energy on the Hanford Site near Richland, Washington. Although the FFTF was a testing facility not specifically designed to breed fuel or produce electricity, it did provide valuable information for LMFBR projects and base technology programs in the areas of plant system and component design, component fabrication, prototype testing, and site construction. The major objectives of the FFTF were to provide a strong, disciplined engineering base for the LMFBR program, provide fast flux testing for other U.S. programs, and contribute to the development of a viable self-sustaining competitive U.S. LMFBR industry. During its ten years of operation, the FFTF acted as a national research facility to test advanced nuclear fuels, materials, components, systems, nuclear power plant operating and maintenance procedures, and active and passive reactor safety technologies; it also produced a large number of isotopes for medical and industrial users, generated tritium for the U.S. fusion research program, and participated in cooperative, international research work. Prior to the implementation of the reactor characterization program, a series of isothermal physics measurements were performed; this acceptance testing program consisted of a series of control rod worths, critical rod positions, subcriticality measurements, maximum reactivity addition rates, shutdown margins, excess reactivity, and isothermal temperature coefficient reactivity. The results of these

  17. Superalloy applications in the fast breeder reactor. [Alloy-A-286; inconel 706; inconel 718; nimonic PE16; alloy-M-813

    Energy Technology Data Exchange (ETDEWEB)

    Powell, R.W.

    1976-01-01

    The economics of the LMFBR are dependent on the breeding of new fuel in the reactor core and this can be improved by the use of advanced alloys as core structural components. The environment of the core makes superalloys a natural choice for these components, but phenomena related directly to neutron irradiation necessitate extensive testing. Consequently, commercially-available superalloys, together with a number of developmental alloys are being tested in existing LMFBR's and by simulation techniques to determine the best alloy for use in the LMFBR core. It presently appears that such materials will indeed be capable of the performance required, and will greatly facilitate the commercial realization of the fast breeder reactor.

  18. Estimated recurrence frequencies for initiating accident categories associated with the Clinch River Breeder Reactor Plant design

    Energy Technology Data Exchange (ETDEWEB)

    Copus, E R

    1982-04-01

    Estimated recurrence frequencies for each of twenty-five generic LMFBR initiating accident categories were quantified using the Clinch River Breeder Reactor Plant (CRBRP) design. These estimates were obtained using simplified systems fault trees and functional event tree models from the Accident Delineation Study Phase I Final Report coupled with order-of-magnitude estimates for the initiator-dependent failure probabilities of the individual CRBRP engineered safety systems. Twelve distinct protected accident categories where SCRAM is assumed to be successful are estimated to occur at a combined rate of 10/sup -3/ times per year while thirteen unprotected accident categories in which SCRAM fails are estimated to occur at a combined rate on the order of 10/sup -5/ times per year. These estimates are thought to be representative despite the fact that human performance factors, maintenance and repair, as well as input common cause uncertainties, were not treated explicitly. The overall results indicate that for the CRBRP design no single accident category appears to be dominant, nor can any be totally eliminated from further investigation in the areas of accident phenomenology for in-core events and post-accident phenomenology for containment.

  19. Performance characterization of geopolymer composites for hot sodium exposed sacrificial layer in fast breeder reactors

    Energy Technology Data Exchange (ETDEWEB)

    Haneefa, K. Mohammed, E-mail: mhkolakkadan@gmail.com [Department of Civil Engineering, IIT Madras, Chennai (India); Santhanam, Manu [Department of Civil Engineering, IIT Madras, Chennai (India); Parida, F.C. [Radiological Safety Division, Indira Gandhi Centre for Atomic Research, Kalpakkam (India)

    2013-12-15

    Highlights: • Performance evaluation of geopolymers subjected to hot liquid sodium is performed. • Apart from mechanical properties, micro-analytical techniques are used for material characterization. • The geopolymer composite showed comparatively lesser damage than conventional cement composites. • Geopolymer technology can emerge as a new choice for sacrificial layer in SCFBRs. - Abstract: A sacrificial layer of concrete is used in sodium cooled fast breeder reactors (SCFBRs) to mitigate thermo-chemical effect of accidentally spilled sodium at and above 550 °C on structural concrete. Performance of this layer is governed by thermo-chemical stability of the ingredients of sacrificial layer concrete. Concrete with limestone aggregate is generally used as a sacrificial layer. Conventional cement based systems exhibit instability in hot liquid sodium environment. Geo-polymer composites are well known to perform excellently at elevated temperatures compared to conventional cement systems. This paper discusses performance of such composites subjected to exposure of hot liquid sodium in air. The investigation includes comprehensive evaluation of various geo-polymer composites before any exposure, after heating to 550 °C in air, and after immersing in hot liquid sodium initially heated to 550 °C in air. Results from the current study indicate that hot liquid sodium produces less damage to geopolymer composites than to the existing conventional cement based system. Hence, the geopolymer technology has potential application in mitigating the degrading effects of sodium fires and can emerge as a new choice for sodium exposed sacrificial layer in SCFBRs.

  20. Assessment of gel-sphere-pac fuel for fast breeder reactors

    Energy Technology Data Exchange (ETDEWEB)

    Lackey, W J; Selle, J E [comps.

    1978-10-01

    An assessment of the state of the art for the gel-sphere-pac process was undertaken to provide a sound basis for further development of the technology. Information is provided on sol preparation, sphere forming, drying, sintering, characterization, loading, fuel rod inspection, and irradiation performance. In addition, discussions are included on: evaluation of the potential for scale-up to production capacities, potential problems associated with remote operation, and future work required to further develop the technology. Three techniques are available for microsphere production: (1) internal gelation, (2) external gelation, and (3) gelation by water extraction. Each has its own advantages and disadvantages; for example, internal gelation appears better suited to the preparation of large spheres than the other processes. Numerous advantages and disadvantages are discussed in detail. Scale-up or remote operation of these techniques appears achievable, although some would require less development than others. Techniques have been developed for drying and sintering spheres. Extensive technology has been developed for sphere characterization, handling, and the loading and inspection of fuel pins. Data available to date indicates that sphere-pac oxide fuel will perform similarly to pellet oxide fuels under fast breeder reactor operating conditions. Gel-sphere-pac technology also appears attractive for carbide fuels.

  1. Final report for the Light Water Breeder Reactor proof-of-breeding analytical support project

    Energy Technology Data Exchange (ETDEWEB)

    Graczyk, D.G.; Hoh, J.C.; Martino, F.J.; Nelson, R.E.; Osudar, J.; Levitz, N.M.

    1987-05-01

    The technology of breeding /sup 233/U from /sup 232/Th in a light water reactor is being developed and evaluated by the Westinghouse Bettis Atomic Power Laboratory (BAPL) through operation and examination of the Shippingport Light Water Breeder Reactor (LWBR). Bettis is determining the end-of-life (EOL) inventory of fissile uranium in the LWBR core by nondestructive assay of a statistical sample comprising approximately 500 EOL fuel rods. This determination is being made with an irradiated-fuel assay gauge based on neutron interrogation and detection of delayed neutrons from each rod. The EOL fissile inventory will be compared with the beginning-of-life fissile loading of the LWBR to determine the extent of breeding. In support of the BAPL proof-of-breeding (POB) effort, Argonne National Laboratory (ANL) carried out destructive physical, chemical, and radiometric analyses on 17 EOL LWBR fuel rods that were previously assayed with the nondestructive gauge. The ANL work included measurements on the intact rods; shearing of the rods into pre-designated contiguous segments; separate dissolution of each of the more than 150 segments; and analysis of the dissolver solutions to determine each segment's uranium content, uranium isotopic composition, and loading of selected fission products. This report describes the facilities in which this work was carried out, details operations involved in processing each rod, and presents a comprehensive discussion of uncertainties associated with each result of the ANL measurements. Most operations were carried out remotely in shielded cells. Automated equipment and procedures, controlled by a computer system, provided error-free data acquisition and processing, as well as full replication of operations with each rod. Despite difficulties that arose during processing of a few rod segments, the ANL destructive-assay results satisfied the demanding needs of the parent LWBR-POB program.

  2. Software development methodology for computer based I&C systems of prototype fast breeder reactor

    Energy Technology Data Exchange (ETDEWEB)

    Manimaran, M., E-mail: maran@igcar.gov.in; Shanmugam, A.; Parimalam, P.; Murali, N.; Satya Murty, S.A.V.

    2015-10-15

    Highlights: • Software development methodology adopted for computer based I&C systems of PFBR is detailed. • Constraints imposed as part of software requirements and coding phase are elaborated. • Compliance to safety and security requirements are described. • Usage of CASE (Computer Aided Software Engineering) tools during software design, analysis and testing phase are explained. - Abstract: Prototype Fast Breeder Reactor (PFBR) is sodium cooled reactor which is in the advanced stage of construction in Kalpakkam, India. Versa Module Europa bus based Real Time Computer (RTC) systems are deployed for Instrumentation & Control of PFBR. RTC systems have to perform safety functions within the stipulated time which calls for highly dependable software. Hence, well defined software development methodology is adopted for RTC systems starting from the requirement capture phase till the final validation of the software product. V-model is used for software development. IEC 60880 standard and AERB SG D-25 guideline are followed at each phase of software development. Requirements documents and design documents are prepared as per IEEE standards. Defensive programming strategies are followed for software development using C language. Verification and validation (V&V) of documents and software are carried out at each phase by independent V&V committee. Computer aided software engineering tools are used for software modelling, checking for MISRA C compliance and to carry out static and dynamic analysis. Various software metrics such as cyclomatic complexity, nesting depth and comment to code are checked. Test cases are generated using equivalence class partitioning, boundary value analysis and cause and effect graphing techniques. System integration testing is carried out wherein functional and performance requirements of the system are monitored.

  3. Techniques for processing remote field eddy current signals from bend regions of steam generator tubes of prototype fast breeder reactor

    Energy Technology Data Exchange (ETDEWEB)

    Thirunavukkarasu, S. [Non Destructive Evaluation Division, Indira Gandhi Centre for Atomic Research, Kalpakkam, TN 603 102 (India); Rao, B.P.C., E-mail: bpcrao@igcar.gov.in [Non Destructive Evaluation Division, Indira Gandhi Centre for Atomic Research, Kalpakkam, TN 603 102 (India); Jayakumar, T.; Raj, Baldev [Non Destructive Evaluation Division, Indira Gandhi Centre for Atomic Research, Kalpakkam, TN 603 102 (India)

    2011-04-15

    Steam generator (SG) is one of the most critical components of sodium cooled fast breeder reactor. Remote field eddy current (RFEC) technique has been chosen for in-service inspection (ISI) of these ferromagnetic SG tubes made of modified 9Cr-1Mo steel (Grade 91). Expansion bends are provided in the SGs to accommodate differential thermal expansion. During ISI using RFEC technique, in expansion bend regions, exciter-receiver coil misalignment, bending stresses, probe wobble and magnetic permeability variations produce disturbing noise hindering detection of defects. Fourier filtering, cross-correlation and wavelet transform techniques have been studied for noise reduction as well as enhancement of RFEC signals of defects in bend regions, having machined grooves and localized defects. Performance of these three techniques has been compared using signal-to-noise ratio (SNR). Fourier filtering technique has shown better performance for noise reduction while cross-correlation technique has resulted in significant enhancement of signals. Wavelet transform technique has shown the combined capability of noise reduction and signal enhancement and resulted in unambiguous detection of 10% of wall loss grooves and localized defects in the bend regions with SNR better than 7 dB.

  4. Summary of estimated doses and risks resulting from routine radionuclide releases from fast breeder reactor fuel cycle facilities

    Energy Technology Data Exchange (ETDEWEB)

    Miller, C.W.; Meyer, H.R.

    1985-01-01

    A project is underway at Oak Ridge National Laboratory to assess the human health and environment effects associated with operation of Liquid Metal Fast Breeder Reactor fuel cycle. In this first phase of the work, emphasis was focused on routine radionuclide releases from reactor and reprocessing facilities. For this study, sites for fifty 1-GW(e) capacity reactors and three reprocessing plants were selected to develop scenarios representative of US power requirements. For both the reactor and reprocessing facility siting schemes selected, relatively small impacts were calculated for locality-specific populations residing within 100 km. Also, the results of these analyses are being used in the identification of research priorities. 13 refs., 2 figs., 3 tabs.

  5. Profiling a reactor component using ultrasonics

    Energy Technology Data Exchange (ETDEWEB)

    Pathak, L.; Seshadri, V.R.; Kumaravadivelu, C.; Sreenivasan, G.; Raghunathan, V.S. [Indira Gandhi Centre for Atomic Research, Kalpakkam (India)

    1995-04-01

    Nuclear reactors have many components within the reactor vessel. During the life of a reactor it is possible for these components to be displaced or deformed because of the thermal cycles to which they are subject. Also, these components in situ therefore becomes important for the upkeep of the reactor. However, high radiation levels make it difficult to monitor using optical methods. This paper describes an ultrasonic method which was successfully employed in profiling a deformed guide tube of a reactor. The method uses the well-known ultrasonic ranging technique. However, the specialty of the method is the use of air transducers at 40 kHz to overcome the inherent divergence problems and the difficulties associated with high temperatures inherent in a sodium cooled reactor.

  6. Three core concepts for producing uranium-233 in commercial pressurized light water reactors for possible use in water-cooled breeder reactors

    Energy Technology Data Exchange (ETDEWEB)

    Conley, G.H.; Cowell, G.K.; Detrick, C.A.; Kusenko, J.; Johnson, E.G.; Dunyak, J.; Flanery, B.K.; Shinko, M.S.; Giffen, R.H.; Rampolla, D.S.

    1979-12-01

    Selected prebreeder core concepts are described which could be backfit into a reference light water reactor similar to current commercial reactors, and produce uranium-233 for use in water-cooled breeder reactors. The prebreeder concepts were selected on the basis of minimizing fuel system development and reactor changes required to permit a backfit. The fuel assemblies for the prebreeder core concepts discussed would occupy the same space envelope as those in the reference core but contain a 19 by 19 array of fuel rods instead of the reference 17 by 17 array. An instrument well and 28 guide tubes for control rods have been allocated to each prebreeder fuel assembly in a pattern similar to that for the reference fuel assemblies. Backfit of these prebreeder concepts into the reference reactor would require changes only to the upper core support structure while providing flexibility for alternatives in the type of fuel used.

  7. Gas-cooled fast breeder reactor. Quarterly progress report, February 1-April 30, 1980

    Energy Technology Data Exchange (ETDEWEB)

    1980-05-01

    Information is presented concerning the reactor vessel; reactivity control mechanisms and instrumentation; reactor internals; primary coolant circuits;core auxiliary cooling system; reactor core; systems engineering; and reactor safety and reliability;

  8. Computerized operating procedures for shearing and dissolution of segments from LWBR (Light Water Breeder Reactor) fuel rods

    Energy Technology Data Exchange (ETDEWEB)

    Osudar, J.; Deeken, P.G.; Graczyk, D.G.; Fagan, J.E.; Martino, F.J.; Parks, J.E.; Levitz, N.M.; Kessie, R.W.; Leddin, J.M.

    1987-05-01

    This report presents two detailed computerized operating procedures developed to assist and control the shearing and dissolution of irradiated fuel rods. The procedures were employed in the destructive analysis of end-of-life fuel rods from the Light Water Breeder Reactor (LWBR) that was designed by the Westinghouse Electric Corporation Bettis Atomic Power Laboratory. Seventeen entire fuel rods from the end-of-life core of the LWBR were sheared into 169 precisely characterized segments, and more than 150 of these segments were dissolved during execution of the LWBR Proof-of-Breeding (LWBR-POB) Analytical Support Project at Argonne National Laboratory. The procedures illustrate our approaches to process monitoring, data reduction, and quality assurance during the LWBR-POB work.

  9. DIissolution of low enriched uranium from the experimental breeder reactor-II fuel stored at the Idaho National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Daniel, G. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Rudisill, T. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Almond, P. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); O' Rourke, P. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-06-28

    The Idaho National Laboratory (INL) is actively engaged in the development of electrochemical processing technology for the treatment of fast reactor fuels using irradiated fuel from the Experimental Breeder Reactor-II (EBR-II) as the primary test material. The research and development (R&D) activities generate a low enriched uranium (LEU) metal product from the electrorefining of the EBR-II fuel and the subsequent consolidation and removal of chloride salts by the cathode processor. The LEU metal ingots from past R&D activities are currently stored at INL awaiting disposition. One potential disposition pathway is the shipment of the ingots to the Savannah River Site (SRS) for dissolution in H-Canyon. Carbon steel cans containing the LEU metal would be loaded into reusable charging bundles in the H-Canyon Crane Maintenance Area and charged to the 6.4D or 6.1D dissolver. The LEU dissolution would be accomplished as the final charge in a dissolver batch (following the dissolution of multiple charges of spent nuclear fuel (SNF)). The solution would then be purified and the 235U enrichment downblended to allow use of the U in commercial reactor fuel. To support this potential disposition path, the Savannah River National Laboratory (SRNL) developed a dissolution flowsheet for the LEU using samples of the material received from INL.

  10. Heavy Water Components Test Reactor Decommissioning - Major Component Removal

    Energy Technology Data Exchange (ETDEWEB)

    Austin, W.; Brinkley, D.

    2010-05-05

    The Heavy Water Components Test Reactor (HWCTR) facility (Figure 1) was built in 1961, operated from 1962 to 1964, and is located in the northwest quadrant of the Savannah River Site (SRS) approximately three miles from the site boundary. The HWCTR facility is on high, well-drained ground, about 30 meters above the water table. The HWCTR was a pressurized heavy water test reactor used to develop candidate fuel designs for heavy water power reactors. It was not a defense-related facility like the materials production reactors at SRS. The reactor was moderated with heavy water and was rated at 50 megawatts thermal power. In December of 1964, operations were terminated and the facility was placed in a standby condition as a result of the decision by the U.S. Atomic Energy Commission to redirect research and development work on heavy water power reactors to reactors cooled with organic materials. For about one year, site personnel maintained the facility in a standby status, and then retired the reactor in place. In 1965, fuel assemblies were removed, systems that contained heavy water were drained, fluid piping systems were drained, deenergized and disconnected and the spent fuel basin was drained and dried. The doors of the reactor facility were shut and it wasn't until 10 years later that decommissioning plans were considered and ultimately postponed due to budget constraints. In the early 1990s, DOE began planning to decommission HWCTR again. Yet, in the face of new budget constraints, DOE deferred dismantlement and placed HWCTR in an extended surveillance and maintenance mode. The doors of the reactor facility were welded shut to protect workers and discourage intruders. The $1.6 billion allocation from the American Recovery and Reinvestment Act to SRS for site clean up at SRS has opened the doors to the HWCTR again - this time for final decommissioning. During the lifetime of HWCTR, 36 different fuel assemblies were tested in the facility. Ten of these

  11. HEAVY WATER COMPONENTS TEST REACTOR DECOMMISSIONING

    Energy Technology Data Exchange (ETDEWEB)

    Austin, W.; Brinkley, D.

    2011-10-13

    The Heavy Water Components Test Reactor (HWCTR) Decommissioning Project was initiated in 2009 as a Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) Removal Action with funding from the American Recovery and Reinvestment Act (ARRA). This paper summarizes the history prior to 2009, the major D&D activities, and final end state of the facility at completion of decommissioning in June 2011. The HWCTR facility was built in 1961, operated from 1962 to 1964, and is located in the northwest quadrant of the Savannah River Site (SRS) approximately three miles from the site boundary. The HWCTR was a pressurized heavy water test reactor used to develop candidate fuel designs for heavy water power reactors. In December of 1964, operations were terminated and the facility was placed in a standby condition as a result of the decision by the U.S. Atomic Energy Commission to redirect research and development work on heavy water power reactors to reactors cooled with organic materials. For about one year, site personnel maintained the facility in a standby status, and then retired the reactor in place. In the early 1990s, DOE began planning to decommission HWCTR. Yet, in the face of new budget constraints, DOE deferred dismantlement and placed HWCTR in an extended surveillance and maintenance mode. The doors of the reactor facility were welded shut to protect workers and discourage intruders. In 2009 the $1.6 billion allocation from the ARRA to SRS for site footprint reduction at SRS reopened the doors to HWCTR - this time for final decommissioning. Alternative studies concluded that the most environmentally safe, cost effective option for final decommissioning was to remove the reactor vessel, both steam generators, and all equipment above grade including the dome. The transfer coffin, originally above grade, was to be placed in the cavity vacated by the reactor vessel and the remaining below grade spaces would be grouted. Once all above equipment

  12. Fabrication, properties, and tritium recovery from solid breeder materials

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, C.E. (Argonne National Lab., IL (USA)); Kondo, T. (Japan Atomic Energy Research Inst., Tokyo (Japan)); Roux, N. (CEA Centre d' Etudes Nucleaires de Saclay, 91 - Gif-sur-Yvette (France)); Tanaka, S. (Tokyo Univ. (Japan)); Vollath, D. (Kernforschungszentrum Karlsruhe GmbH (Germany, F.R.))

    1991-01-01

    The breeding blanket is a key component of the fusion reactor because it directly involves tritium breeding and energy extraction, both of which are critical to development of fusion power. The lithium ceramics continue to show promise as candidate breeder materials. This promise was recognized by the International Thermonuclear Experimental Reactor (ITER) design team in its selection of ceramics as the first option for the ITER breeder material. Blanket design studies have indicated properties in the candidate materials data base that need further investigation. Current studies are focusing on tritium release behavior at high burnup, changes in thermophysical properties with burnup, compatibility between the ceramic breeder and beryllium multiplier, and phase changes with burnup. Laboratory and in-reactor tests, some as part of an international collaboration for development of ceramic breeder materials, are underway. 133 refs., 1 fig.

  13. The passive nondestructive assay of the plutonium content of spent-fuel assemblies from the BN-350 fast-breeder reactor in the city of Aqtau, Kazakhstan

    CERN Document Server

    Lestone, J P; Rennie, J A; Sprinkle, J K; Staples, P; Grimm, K N; Hill, R N; Cherradi, I; Islam, N; Koulikov, J; Starovich, Z

    2002-01-01

    The International Atomic Energy Agency is presently interested in developing equipment and techniques to measure the plutonium content of breeder reactor spent-fuel assemblies located in storage ponds before they are relocated to more secure facilities. We present the first quantitative nondestructive assay of the plutonium content of fast-breeder reactor spent-fuel assemblies while still underwater in their facility storage pond. We have calibrated and installed an underwater neutron coincidence counter (Spent Fuel Coincidence Counter (SFCC)) in the BN-350 reactor spent-fuel pond in Aqtau, Kazakhstan. A procedure has been developed to convert singles and doubles (coincidence) neutron rates observed by the SFCC into the total plutonium content of a given BN-350 spent-fuel assembly. The plutonium content has been successfully determined for spent-fuel assemblies with a contact radiation level as high as approx 10 sup 5 Rads/h. Using limited facility information and multiple measurements along the length of spe...

  14. TOKOPS: Tokamak Reactor Operations Study: The influence of reactor operations on the design and performance of tokamaks with solid-breeder blankets: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Conn, R.W.; Ghoniem, N.M.; Firestone, M.A. (eds.)

    1986-09-01

    Reactor system operation and procedures have a profound impact on the conception and design of power plants. These issues are studied here using a model tokamak system employing a solid-breeder blanket. The model blanket is one which has evolved from the STARFIRE and BCSS studies. The reactor parameters are similar to those characterizing near-term fusion engineering reactors such as INTOR or NET (Next European Tokamak). Plasma startup, burn analysis, and methods for operation at various levels of output power are studied. A critical, and complicating, element is found to be the self-consistent electromagnetic response of the system, including the presence of the blanket and the resulting forces and loadings. Fractional power operation, and the strategy for burn control, is found to vary depending on the scaling law for energy confinement, and an extensive study is reported. Full-power reactor operation is at a neutron wall loading pf 5 MW/m/sup 2/ and a surface heat flux of 1 MW/m/sup 2/. The blanket is a pressurized steel module with bare beryllium rods and low-activation HT-9-(9-C-) clad LiAlO/sub 2/ rods. The helium coolant pressure is 5 MPa, entering the module at 297/sup 0/C and exiting at 550/sup 0/C. The system power output is rated at 1000 MW(e). In this report, we present our findings on various operational scenarios and their impact on system design. We first start with the salient aspects of operational physics. Time-dependent analyses of the blanket and balance of plant are then presented. Separate abstracts are included for each chapter.

  15. Automated operator procedure prompting for startup of Experimental Breeder Reactor-2

    Energy Technology Data Exchange (ETDEWEB)

    Renshaw, A.W.; Ball, S.J.; Ford, C.E.

    1990-11-01

    This report describes the development of an operator procedure prompting aid for startup of a nuclear reactor. This operator aid is a preliminary design for a similar aid that eventually will be used with the Advanced Liquid Metal Reactor (ALMR) presently in the design stage. Two approaches were used to develop this operator procedure prompting aid. One method uses an expert system software shell, and the other method uses database software. The preliminary requirements strongly pointed toward features traditionally associated with both database and expert systems software. Database software usually provides data manipulation flexibility and user interface tools, and expert systems tools offer sophisticated data representation and reasoning capabilities. Both methods, including software and associated hardware, are described in this report. Proposals for future enhancements to improve the expert system approach to procedure prompting and for developing other operator aids are also offered. 25 refs., 14 figs.

  16. Core loading pattern optimization of thorium fueled heavy water breeder reactor using genetic algorithm

    Energy Technology Data Exchange (ETDEWEB)

    Soewono, C. N.; Takaki, N. [Dept. of Applied Science Engineering, Faculty Tokai Univ., Kanagawa-ken, Hiratsuka-shi Kitakaname 4-1-1 (Japan)

    2012-07-01

    In this work genetic algorithm was proposed to solve fuel loading pattern optimization problem in thorium fueled heavy water reactor. The objective function of optimization was to maximize the conversion ratio and minimize power peaking factor. Those objectives were simultaneously optimized using non-dominated Pareto-based population ranking optimal method. Members of non-dominated population were assigned selection probabilities based on their rankings in a manner similar to Baker's single criterion ranking selection procedure. A selected non-dominated member was bred through simple mutation or one-point crossover process to produce a new member. The genetic algorithm program was developed in FORTRAN 90 while neutronic calculation and analysis was done by COREBN code, a module of core burn-up calculation for SRAC. (authors)

  17. Numerical analysis of thermal stratification phenomena in upper plenum of a fast breeder reactor (1). Evaluation of thermal stratification phenomena near the region of flow holes

    Energy Technology Data Exchange (ETDEWEB)

    Suda, Kazunori; Muramatu, Toshiharu; Yamaguchi, Akira [Japan Nuclear Cycle Development Inst., Oarai, Ibaraki (Japan). Oarai Engineering Center

    2002-12-01

    Thermal stratification phenomena are observed in an upper plenum of liquid metal fast breeder reactors (LMFBRs) under reactor scram conditions, which give rise to thermal stress on structural components. Therefore it is important to evaluate characteristics of the phenomena in the design on the internal structures in an LMFBR plenum. To evaluate long-term characteristics of thermal stratification phenomena in a typical LMFBR upper plenum, numerical analysis was carried out with a multi-dimensional thermohydraulics code AQUA for a scram event from full power operation condition. Thereafter the numerical results were compared with extrapolated results of measured transient data on the 40% operation condition. From the thermohydraulic analysis by the AQUA code, the following results have been obtained. (Long-term characteristics of thermal stratification phenomena) The cold fluid region near the inside inner barrel was expanded with accumulation of the cold fluid in the lower region of the plenum after 300 seconds from the reactor scram, so that the fluid from core flowed to the lower region of the upper plenum. The characteristics of axial temperature distributions in the upper plenum were similar to them at the 300 seconds. The thermal stratification interface was located initially around intermediate position between upper lower flow holes. And an another thermal stratification interface was formed around the inner barrel support plate after 300 seconds from the scram, so that the cold fluid accumulated in the lower region of the plenum. But the thermal stratification interface around the inner barrel support plate was disappeared by mixture and heat conduction of coolant of circumferential direction. The thermal stratification interface which was located below in the upper flow holes, rose to the upward position of the upper flow holes at the 720 seconds. In annular gap region between the inner barrel and the reactor vessel wall, thermal stratification interface

  18. Seismic design technology for breeder reactor structures. Volume 4. Special topics in piping and equipment

    Energy Technology Data Exchange (ETDEWEB)

    Reddy, D.P.

    1983-04-01

    This volume is divided into five chapters: experimental verification of piping systems, analytical verification of piping restraint systems, seismic analysis techniques for piping systems with multisupport input, development of floor spectra from input response spectra, and seismic analysis procedures for in-core components. (DLC)

  19. Cost/performance comparison between pulse columns and centrifugal contactors designed to process Clinch River Breeder Reactor fuel

    Energy Technology Data Exchange (ETDEWEB)

    Ciucci, J.A. Jr.

    1983-12-01

    A comparison between pulse columns and centrifugal contactors was made to determine which type of equipment was more advantageous for use in the primary decontamination cycle of a remotely operated fuel reprocessing plant. Clinch River Breeder Reactor (CRBR) fuel was chosen as the fuel to be processed in the proposed 1 metric tonne/day reprocessing facility. The pulse columns and centrifugal contactors were compared on a performance and total cost basis. From this comparison, either the pulse columns or the centrifugal contactors will be recommended for use in a fuel reprocessing plant built to reprocess CRBR fuel. The reliability, solvent exposure to radiation, required time to reach steady state, and the total costs were the primary areas of concern for the comparison. The pulse column units were determined to be more reliable than the centrifugal contactors. When a centrifugal contactor motor fails, it can be remotely changed in less than one eight hour shift. Pulse columns expose the solvent to approximately five times as much radiation dose as the centrifugal contactor units; however, the proposed solvent recovery system adequately cleans the solvent for either case. The time required for pulse columns to reach steady state is many times longer than the time required for centrifugal contactors to reach steady state. The cost comparison between the two types of contacting equipment resulted in centrifugal contactors costing 85% of the total cost of pulse columns when the contactors were stacked on three levels in the module. If the centrifugal contactors were all positioned on the top level of a module with the unoccupied volume in the module occupied by other equipment, the centrifugal contactors cost is 66% of the total cost of pulse columns. Based on these results, centrifugal contactors are recommended for use in a remotely operated reprocessing plant built to reprocess CRBR fuel.

  20. AB INITIO STUDY OF ADVANCED METALLIC NUCLEAR FUELS FOR FAST BREEDER REACTORS

    Energy Technology Data Exchange (ETDEWEB)

    Landa, A; Soderlind, P; Grabowski, B; Turchi, P A; Ruban, A V; Vitos, L

    2012-04-23

    Density-functional formalism is applied to study the ground state properties of {gamma}-U-Zr and {gamma}-U-Mo solid solutions. Calculated heats of formation are compared with CALPHAD assessments. We discuss how the heat of formation in both alloys correlates with the charge transfer between the alloy components. The decomposition curves for {gamma}-based U-Zr and U-Mo solid solutions are derived from Ising-type Monte Carlo simulations. We explore the idea of stabilization of the {delta}-UZr{sub 2} compound against the {alpha}-Zr (hcp) structure due to increase of Zr d-band occupancy by the addition of U to Zr. We discuss how the specific behavior of the electronic density of states in the vicinity of the Fermi level promotes the stabilization of the U{sub 2}Mo compound. The mechanism of possible Am redistribution in the U-Zr and U-Mo fuels is also discussed.

  1. Special Analysis for the Disposal of the INL Waste Associated with the Unirradiated Light Water Breeder Reactor (LWBR) Waste Stream at the Area 5 Radioactive Waste Management Site

    Energy Technology Data Exchange (ETDEWEB)

    Shott, Gregory [National Security Technologies, LLC, Las Vegas, NV (United States)

    2017-03-21

    This special analysis (SA) evaluates whether the Idaho National Laboratory (INL) Waste Associated with the Unirradiated Light Water Breeder Reactor (LWBR) waste stream (INEL167203QR1, Revision 0) is suitable for shallow land burial (SLB) at the Area 5 Radioactive Waste Management Site (RWMS) on the Nevada National Security Site (NNSS). Disposal of the INL Waste Associated with the Unirradiated LWBR waste meets all U.S. Department of Energy (DOE) Manual DOE M 435.1-1, “Radioactive Waste Management Manual,” Chapter IV, Section P performance objectives (DOE 1999). The INL Waste Associated with the Unirradiated LWBR waste stream is recommended for acceptance with the condition that the total uranium-233 (233U) inventory be limited to 2.7E13 Bq (7.2E2 Ci).

  2. Designed porosity materials in nuclear reactor components

    Science.gov (United States)

    Yacout, A. M.; Pellin, Michael J.; Stan, Marius

    2016-09-06

    A nuclear fuel pellet with a porous substrate, such as a carbon or tungsten aerogel, on which at least one layer of a fuel containing material is deposited via atomic layer deposition, and wherein the layer deposition is controlled to prevent agglomeration of defects. Further, a method of fabricating a nuclear fuel pellet, wherein the method features the steps of selecting a porous substrate, depositing at least one layer of a fuel containing material, and terminating the deposition when the desired porosity is achieved. Also provided is a nuclear reactor fuel cladding made of a porous substrate, such as silicon carbide aerogel or silicon carbide cloth, upon which layers of silicon carbide are deposited.

  3. Feasibility of processing the experimental breeder reactor-II driver fuel from the Idaho National Laboratory through Savannah River Site's H-Canyon facility

    Energy Technology Data Exchange (ETDEWEB)

    Magoulas, V. E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-07-28

    Savannah River National Laboratory (SRNL) was requested to evaluate the potential to receive and process the Idaho National Laboratory (INL) uranium (U) recovered from the Experimental Breeder Reactor II (EBR-II) driver fuel through the Savannah River Site’s (SRS) H-Canyon as a way to disposition the material. INL recovers the uranium from the sodium bonded metallic fuel irradiated in the EBR-II reactor using an electrorefining process. There were two compositions of EBR-II driver fuel. The early generation fuel was U-5Fs, which consisted of 95% U metal alloyed with 5% noble metal elements “fissium” (2.5% molybdenum, 2.0% ruthenium, 0.3% rhodium, 0.1% palladium, and 0.1% zirconium), while the later generation was U-10Zr which was 90% U metal alloyed with 10% zirconium. A potential concern during the H-Canyon nitric acid dissolution process of the U metal containing zirconium (Zr) is the explosive behavior that has been reported for alloys of these materials. For this reason, this evaluation was focused on the ability to process the lower Zr content materials, the U-5Fs material.

  4. Control rod calibration methods for fast breeder reactors applied to Phenix; Les methodes d'etalonnage des barres de commande des reacteurs a neutrons rapides application a Phenix

    Energy Technology Data Exchange (ETDEWEB)

    Lecourt, G

    1998-06-18

    The control and the emergency shutdown of a fast breeder reactor depends essentially on control rods. For this reason, it is imperative to know exactly how much anti reactivity is introduced with the rods in the reactor core. Different methods have been compared in order to see if they are compatible with Phenix reactor. Their limits have been studied. The shadow and anti shadow effects that can the rods make one to the other and then their effective weight of the rods screen have been clarified. (N.C.)

  5. Thermal hydraulic parametric investigation of decay heat removal from degraded core of a sodium cooled fast Breeder reactor

    Energy Technology Data Exchange (ETDEWEB)

    Verma, Lokesh [Department of Physics and Astrophysics, University of Delhi, Delhi 110007 (India); Kumar Sharma, Anil, E-mail: aksharma@igcar.gov.in [Reactor Design Group, Indira Gandhi Centre for Atomic Research, HBNI, Kalpakkam (India); Velusamy, K. [Reactor Design Group, Indira Gandhi Centre for Atomic Research, HBNI, Kalpakkam (India)

    2017-03-15

    Highlights: • Decay heat removal from degraded core of a typical SFR is highlighted. • Influence of number of DHXs in operation on PAHR is analyzed. • Investigations on structural integrity of the inner vessel and core catcher. • Feasibility study for retention of a part of debris in upper pool of SFR. - Abstract: Ensuring post accident decay heat removal with high degree of reliability following a Core Disruptive Accident (CDA) is very important in the design of sodium cooled fast reactors (SFR). In the recent past, a lot of research has been done towards the design of an in-vessel core catcher below the grid plate to prevent the core debris reaching the main vessel in a pool type SFR. However, during an energetic CDA, the entire core debris is unlikely to reach the core catcher. A significant part of the debris is likely to settle in core periphery between radial shielding subassemblies and the inner vessel. Failure of inner vessel due to the decay heat can lead to core debris reaching the main vessel and threatening its integrity. On the other hand, retention of a part of debris in core periphery can reduce the load on main core catcher. Towards achieving an optimum design of SFR and safety evaluation, it is essential to quantify the amount of heat generating core debris that can be retained safely within the primary vessel. This has been performed by a mathematical simulation comprising solution of 2-D transient form of the governing equations of turbulent sodium flow and heat transfer with Boussinesq approximations. The conjugate conduction-convection model adopted for this purpose is validated against in-house experimental data. Transient evolutions of natural convection in the pools and structural temperatures in critical components have been predicted. It is found that 50% of the core debris can be safely accommodated in the gap between radial shielding subassemblies and inner vessel without exceeding structural temperature limit. It is also

  6. Diffusion bonding as joining technique for fusion reactor components

    Energy Technology Data Exchange (ETDEWEB)

    Ceccotti, G.C.; Magnoli, L.

    1992-11-01

    The development of joining techniques for fusion reactor divertors has been undertaken at ENEA (Italian Agency for Energy, New Technologies and the Environment) IFEC Saluggia. Joints were made by the diffusion bonding technique between graphite composite material with DS copper and with molybdenum TZM alloy, respectively. The inter-layers, when necessary, were obtained by metallization with an electronic gun. The same technique is employed in joining Be/SS, DS copper/Be, TZM/Be and graphite/Be for the first wall or plasma facing components of fusion reactors. In this case, a suitable inter-layer material can avoid the problems occuring with the more traditional brazing processes.

  7. Nuclear reactor spacer grid and ductless core component

    Science.gov (United States)

    Christiansen, David W.; Karnesky, Richard A.

    1989-01-01

    The invention relates to a nuclear reactor spacer grid member for use in a liquid cooled nuclear reactor and to a ductless core component employing a plurality of these spacer grid members. The spacer grid member is of the egg-shell type and is constructed so that the walls of the cell members of the grid member are formed of a single thickness of metal to avoid tolerance problems. Within each cell member is a hydraulic spring which laterally constrains the nuclear material bearing rod which passes through each cell member against a hardstop in response to coolant flow through the cell member. This hydraulic spring is also suitable for use in a water cooled nuclear reactor. A core component constructed of, among other components, a plurality of these spacer grid members, avoids the use of a full length duct by providing spacer sleeves about the sodium tubes passing through the spacer grid members at locations between the grid members, thereby maintaining a predetermined space between adjacent grid members.

  8. Conditioning of waste from the dismantling of reactor pressure vessel components and of core components

    Energy Technology Data Exchange (ETDEWEB)

    Cleve, R.; Oldiges, O.; Splittler, U.

    2001-07-01

    When power reactors are shut down, the treatment of the core components and of the reactor pressure vessel components constitutes a particular task. Due to its special radiological characteristics, this waste must basically be handled using remote-control equipment with regard to the treatment. For its conditioning in a manner appropriate for the final storage, the waste must be dried and packed into suitable packing drums. The solution implemented by GNS and DSD in order to treat this waste from the Wuergassen nuclear power plant is described in the present contribution. (orig.)

  9. 77 FR 39521 - Application for a License To Export Nuclear Reactor Major Components and Equipment

    Science.gov (United States)

    2012-07-03

    ... From the Federal Register Online via the Government Publishing Office NUCLEAR REGULATORY COMMISSION Application for a License To Export Nuclear Reactor Major Components and Equipment Pursuant to 10... Reactor internals, Components and For use in Braka nuclear power Company LLC reactor coolant equipment for...

  10. Development and verification test of integral reactor major components

    Energy Technology Data Exchange (ETDEWEB)

    Kim, J. I.; Kim, Y. W.; Kim, J. H. and others

    1999-03-01

    The conceptual designs for SG, MCP, CEDM to be installed in the integral reactor SMART were developed. Three-dimensional CAD models for the major components were developed to visualize the design concepts. Once-through helical steam generator was conceptually designed for SMART. Canned motor pump was adopted in the conceptual design of MCP. Linear pulse motor type and ballscrew type CEDM, which have fine control capabilities were studied for adoption in SMART. In parallel with the structural design, the electro-magnetic design was performed for the sizing motors and electro-magnet. Prototypes for the CEDM and MCP sub-assemblies were developed and tested to verify the performance. The impeller design procedure and the computer program to analyze the dynamic characteristics of MCP rotor shaft were developed. The design concepts of SG, MCP, CEDM were also invetigated for the fabricability.

  11. Thermal breeder fuel enrichment zoning

    Science.gov (United States)

    Capossela, Harry J.; Dwyer, Joseph R.; Luce, Robert G.; McCoy, Daniel F.; Merriman, Floyd C.

    1992-01-01

    A method and apparatus for improving the performance of a thermal breeder reactor having regions of higher than average moderator concentration are disclosed. The fuel modules of the reactor core contain at least two different types of fuel elements, a high enrichment fuel element and a low enrichment fuel element. The two types of fuel elements are arranged in the fuel module with the low enrichment fuel elements located between the high moderator regions and the high enrichment fuel elements. Preferably, shim rods made of a fertile material are provided in selective regions for controlling the reactivity of the reactor by movement of the shim rods into and out of the reactor core. The moderation of neutrons adjacent the high enrichment fuel elements is preferably minimized as by reducing the spacing of the high enrichment fuel elements and/or using a moderator having a reduced moderating effect.

  12. 76 FR 68514 - Request for a License To Export Reactor Components

    Science.gov (United States)

    2011-11-04

    ... COMMISSION Request for a License To Export Reactor Components Pursuant to 10 CFR 110.70 (b) ``Public Notice... reactor 12 Perform seismic China. LLC, August 18, 2011, October control rod system testing necessary 6, 2011, XR174, 11005963. and associated for qualification equipment. of AP1000 (design) nuclear reactors...

  13. Argonne Liquid-Metal Advanced Burner Reactor : components and in-vessel system thermal-hydraulic research and testing experience - pathway forward.

    Energy Technology Data Exchange (ETDEWEB)

    Kasza, K.; Grandy, C.; Chang, Y.; Khalil, H.; Nuclear Engineering Division

    2007-06-30

    This white paper provides an overview and status report of the thermal-hydraulic nuclear research and development, both experimental and computational, conducted predominantly at Argonne National Laboratory. Argonne from the early 1970s through the early 1990s was the Department of Energy's (DOE's) lead lab for thermal-hydraulic development of Liquid Metal Reactors (LMRs). During the 1970s and into the mid-1980s, Argonne conducted thermal-hydraulic studies and experiments on individual reactor components supporting the Experimental Breeder Reactor-II (EBR-II), Fast Flux Test Facility (FFTF), and the Clinch River Breeder Reactor (CRBR). From the mid-1980s and into the early 1990s, Argonne conducted studies on phenomena related to forced- and natural-convection thermal buoyancy in complete in-vessel models of the General Electric (GE) Prototype Reactor Inherently Safe Module (PRISM) and Rockwell International (RI) Sodium Advanced Fast Reactor (SAFR). These two reactor initiatives involved Argonne working closely with U.S. industry and DOE. This paper describes the very important impact of thermal hydraulics dominated by thermal buoyancy forces on reactor global operation and on the behavior/performance of individual components during postulated off-normal accident events with low flow. Utilizing Argonne's LMR expertise and design knowledge is vital to the further development of safe, reliable, and high-performance LMRs. Argonne believes there remains an important need for continued research and development on thermal-hydraulic design in support of DOE's and the international community's renewed thrust for developing and demonstrating the Global Nuclear Energy Partnership (GNEP) reactor(s) and the associated Argonne Liquid Metal-Advanced Burner Reactor (LM-ABR). This white paper highlights that further understanding is needed regarding reactor design under coolant low-flow events. These safety-related events are associated with the transition

  14. Ageing investigation and upgrading of components/systems of Kartini research reactor

    Energy Technology Data Exchange (ETDEWEB)

    Syarip; Widi Setiawan [Yogyakarta Nuclear Research Centre, Yogyakarta (Indonesia)

    1998-10-01

    Kartini research reactor has been operated in good condition and has demonstrated successful operation for the past 18 years, utilized for: reactor kinetic and control studies, instrumentation tests, neutronic and thermohydraulic studies, routine neutron activation analysis, reactor safety studies, training for research reactor operators and supervisors, and reactor physics experiments. Several components of Kartini reactor use components from the abandoned IRT-2000 Project at Serpong and from Bandung Reactor Centre such as: reactor tank, reactor core, heat exchanger, motor blower for ventilation system, fuel elements, etc. To maintain a good operating performance and also for aging investigation purposes, the component failure data collection has been done. The method used is based on the Manual on Reliability Data Collection For Research Reactor PSAs, IAEA TECDOC 636, and analyzed by using Data Entry System (DES) computer code. Analysis result shows that the components/systems failure rate of Kartini reactor is around 1,5.10{sup -4} up to 2,8.10{sup -4} per hour, these values are within the ranges of the values indicated in IAEA TECDOC 478. Whereas from the analysis of irradiation history shows that the neutron fluence of fuel element with highest burn-up (2,05 gram U-235 in average) is around 1.04.10{sup 16} n Cm{sup -2} and this value is still far below its limiting value. Some reactor components/systems have been replaced and upgraded such as heat exchanger, instrumentation and control system (ICS), etc. The new reactor ICS was installed in 1994 which is designed as a distributed structure by using microprocessor based systems and bus system technology. The characteristic and operating performance of the new reactor ICS, as well as the operation history and improvement of the Kartini research reactor is presented. (J.P.N.)

  15. Structural response of 1/20-scale models of the Clinch River Breeder Reactor to a simulated hypothetical core-disruptive accident

    Energy Technology Data Exchange (ETDEWEB)

    Romander, C M; Cagliostro, D J

    1978-10-01

    Five experiments were performed to help evaluate the structural integrity of the reactor vessel and head design and to verify code predictions. In the first experiment (SM 1), a detailed model of the head was loaded statically to determine its stiffness. In the remaining four experiments (SM 2 to SM 5), models of the vessel and head were loaded dynamically under a simulated 661 MW-s hypothetical core disruptive accident (HCDA). Models SM 2 to SM 4, each of increasing complexity, systematically showed the effects of upper internals structures, a thermal liner, core support platform, and torospherical bottom on vessel response. Model SM 5, identical to SM 4 but more heavily instrumented, demonstrated experimental reproducibility and provided more comprehensive data. The models consisted of a Ni 200 vessel and core barrel, a head with shielding and simulated component masses, and an upper internals structure (UIS).

  16. 77 FR 23513 - Updated Aging Management Criteria for Reactor Vessel Internal Components of Pressurized Water...

    Science.gov (United States)

    2012-04-19

    ... COMMISSION Updated Aging Management Criteria for Reactor Vessel Internal Components of Pressurized Water... Management Criteria for PWR Reactor Vessel Internal Components.'' The original notice provided the ADAMS... published a notice requesting public comments on draft LR-ISG-2011-04, ``Updated Aging Management Criteria...

  17. Thermodynamic characterization of salt components for Molten Salt Reactor fuel

    NARCIS (Netherlands)

    Capelli, E.

    2016-01-01

    The Molten Salt Reactor (MSR) is a promising future nuclear fission reactor technology with excellent performance in terms of safety and reliability, sustainability, proliferation resistance and economics. For the design and safety assessment of this concept, it is extremely important to have a

  18. Special Analysis for the Disposal of the Idaho National Laboratory Unirradiated Light Water Breeder Reactor Rods and Pellets Waste Stream at the Area 5 Radioactive Waste Management Site, Nevada National Security Site, Nye County, Nevada

    Energy Technology Data Exchange (ETDEWEB)

    None

    2014-08-31

    The purpose of this special analysis (SA) is to determine if the Idaho National Laboratory (INL) Unirradiated Light Water Breeder Reactor (LWBR) Rods and Pellets waste stream (INEL103597TR2, Revision 2) is suitable for disposal by shallow land burial (SLB) at the Area 5 Radioactive Waste Management Site (RWMS). The INL Unirradiated LWBR Rods and Pellets waste stream consists of 24 containers with unirradiated fabricated rods and pellets composed of uranium oxide (UO2) and thorium oxide (ThO2) fuel in zirconium cladding. The INL Unirradiated LWBR Rods and Pellets waste stream requires an SA because the 229Th, 230Th, 232U, 233U, and 234U activity concentrations exceed the Nevada National Security Site (NNSS) Waste Acceptance Criteria (WAC) Action Levels.

  19. A study on the establishment of component/equipment performance criteria considering Heavy Water Reactor characteristics

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Keun Sun; Kwon, Young Chul; Lee, Min Kyu; Lee, Yun Soo [Sunmoon Univ., Asan (Korea, Republic of); Chang, Seong Hoong; Ryo, Chang Hyun [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of); Kim, Soong Pyung; Hwnag, Jung Rye; Chung, Chul Kee [Chosun Univ., Gwangju (Korea, Republic of)

    2002-03-15

    Foreign and domestic technology trends, regulatory requirements, design and researches for heavy water reactors are analyzed. Safety design guides of Canada industry and regulatory documents and consultative documents of Canada regulatory agency are reviewed. Applicability of MOST guidance 16 Revision 'guidance for technical criteria of nuclear reactor facility' is reviewed. Specific performance criteria are established for components and facilities for heavy water reactor.

  20. Structural response of 1/20-scale models of the Clinch River Breeder Reactor to a simulated hypothetical core disruptive accident. Technical report 4

    Energy Technology Data Exchange (ETDEWEB)

    Romander, C. M.; Cagliostro, D. J.

    1978-10-01

    Five experiments were performed to help evaluate the structural integrity of the reactor vessel and head design and to verify code predictions. In the first experiment (SM 1), a detailed model of the head was loaded statically to determine its stiffness. In the remaining four experiments (SM 2 to SM 5), models of the vessel and head were loaded dynamically under a simulated 661 MW-sec hypothetical core disruptive accident (HCDA). Models SM 2 to SM 4, each of increasing complexity, systematically showed the effects of upper internals structures, a thermal liner, core support platform, and torospherical bottom on vessel response. Model SM 5, identical to SM 4 but more heavily instrumented, demonstrated experimental reproducibility and provided more comprehensive data. The models consisted of a Ni 200 vessel and core barrel, a head with shielding and simulated component masses, an upper internals structure (UIS), and, in the more complex models SM 4 and SM 5, a Ni 200 thermal liner and core support structure. Water simulated the liquid sodium coolant and a low-density explosive simulated the HCDA loads.

  1. Three-component U-Pu-Th fuel for plutonium irradiation in heavy water reactors

    Directory of Open Access Journals (Sweden)

    Peel Ross

    2016-01-01

    Full Text Available This paper discusses concepts for three-component fuel bundles containing plutonium, uranium and thorium for use in pressurised heavy water reactors, and cases for and against implementation of such a nuclear energy system in the United Kingdom. Heavy water reactors are used extensively in Canada, and are deploying within India and China, whilst the UK is considering the use of heavy water reactors to manage its plutonium inventory of 140 tonnes. The UK heavy water reactor proposal uses a mixed oxide (MOX fuel of plutonium in depleted uranium, within the enhanced CANDU-6 (EC-6 reactor. This work proposes an alternative heterogeneous fuel concept based on the same reactor and CANFLEX fuel bundle, with eight large-diameter fuel elements loaded with natural thorium oxide and 35 small-diameter fuel elements loaded with a MOX of plutonium and reprocessed uranium stocks from UK MAGNOX and AGR reactors. Indicative neutronic calculations suggest that such a fuel would be neutronically feasible. A similar MOX may alternatively be fabricated from reprocessed <5% enriched light water reactor fuel, such as the fuel of the AREVA EPR reactor, to consume newly produced plutonium from reprocessing, similar to the DUPIC (direct use of PWR fuel in CANDU process.

  2. Fabrication of nuclear ship reactor MRX model and study on inspection and maintenance of components

    Energy Technology Data Exchange (ETDEWEB)

    Kasahara, Yoshiyuki [Mitsubishi Heavy Industries Ltd., Tokyo (Japan); Nakazawa, Toshio; Kusunoki, Tsuyoshi; Takahashi, Hiroki; Yoritsune, Tsutomu

    1997-10-01

    The MRX (Marine Reactor X) is an integral type small reactor adopting passive safety systems. As for an integral type reactor, primary system components are installed in the reactor vessel. It is therefor important to establish the appropriate procedure for construction, inspection and maintenance, dismauntling, etc., for all components in the reactor vessel as well as in the reactor containment, because inspection space is limited. To study these subjects, a one-fifth model of the MRX was fabricated and operation capabilities were studied. As a result of studies, the following results are obtained. (1) Manufacturing and installing problems of the reactor pressure vessel, the containment vessel and internal components are basically not abserved. (2) Heat transfer tube structures of the steam generator and the heat exchangers of emergency decay heat removal system and containment water cooler were not seen of any problem for fabrication. However, due consideration is required in the detailed design of supports of heat transfer tubes. (3) Further studies should be needed for designs of flange penetrations and leak countermeasures for pipes instrument cables. (4) Arrangements of equipments in the containment should be taken in consideration in detail because the space is narrow. (5) Further discussion is required for installation methods of instruments and cables. (author)

  3. Component-Level Prognostics Health Management Framework for Passive Components - Advanced Reactor Technology Milestone: M2AT-15PN2301043

    Energy Technology Data Exchange (ETDEWEB)

    Ramuhalli, Pradeep; Roy, Surajit; Hirt, Evelyn H.; Prowant, Matthew S.; Pitman, Stan G.; Tucker, Joseph C.; Dib, Gerges; Pardini, Allan F.

    2015-06-19

    This report describes research results to date in support of the integration and demonstration of diagnostics technologies for prototypical advanced reactor passive components (to establish condition indices for monitoring) with model-based prognostics methods. Achieving this objective will necessitate addressing several of the research gaps and technical needs described in previous technical reports in this series.

  4. What determines hatchling weight: breeder age or incubated egg weight?

    Directory of Open Access Journals (Sweden)

    AB Traldi

    2011-12-01

    Full Text Available Two experiments were carried out to determine which factor influences weight at hatch of broiler chicks: breeder age or incubated egg weight. In Experiment 1, 2340 eggs produced by 29- and 55-week-old Ross® broiler breeders were incubated. The eggs selected for incubation weighed one standard deviation below and above average egg weight. In Experiment 2, 2160 eggs weighing 62 g produced by breeders of both ages were incubated. In both experiments, 50 additional eggs within the weight interval determined for each breeder age were weighed, broken, and their components were separated and weighed. At hatch, hatchlings were sexed and weighed, determining the average initial weight of the progeny of each breeder age. Data were analyzed using the Analyst program of SAS® software package. In Experiment 1, the weight difference between eggs produced by young and mature breeders was 10.92 g, and the component that mostly influenced this difference was the yolk (7.51 g heavier in mature breeders, compared with 4.23 g difference in albumen and 0.8 g in eggshell weights. Hatchling weight difference was 9.4 g higher in eggs from mature breeders. In Experiment 2, egg weight difference was only 0.74 g, but yolk weight was 4.59 g higher in the eggs of mature breeders. The results obtained in the present study indicate that hatchling weight is influenced by egg weight, and not by breeder age.

  5. An Analysis of Testing Requirements for Fluoride Salt Cooled High Temperature Reactor Components

    Energy Technology Data Exchange (ETDEWEB)

    Holcomb, David Eugene [ORNL; Cetiner, Sacit M [ORNL; Flanagan, George F [ORNL; Peretz, Fred J [ORNL; Yoder Jr, Graydon L [ORNL

    2009-11-01

    This report provides guidance on the component testing necessary during the next phase of fluoride salt-cooled high temperature reactor (FHR) development. In particular, the report identifies and describes the reactor component performance and reliability requirements, provides an overview of what information is necessary to provide assurance that components will adequately achieve the requirements, and then provides guidance on how the required performance information can efficiently be obtained. The report includes a system description of a representative test scale FHR reactor. The reactor parameters presented in this report should only be considered as placeholder values until an FHR test scale reactor design is completed. The report focus is bounded at the interface between and the reactor primary coolant salt and the fuel and the gas supply and return to the Brayton cycle power conversion system. The analysis is limited to component level testing and does not address system level testing issues. Further, the report is oriented as a bottom-up testing requirements analysis as opposed to a having a top-down facility description focus.

  6. Overview of pool hydraulic design of Indian prototype fast breeder ...

    Indian Academy of Sciences (India)

    Computational Fluid Dynamics (CFD) plays a critical role in the design of pool type reactors and becomes an increasingly popular tool, thanks to the advancements in computing technology. In this paper, thermal hydraulic characteristics of a fast breeder reactor, design limits and challenging thermal hydraulic investigations ...

  7. A contribution to the analysis of the thermal behaviour of Fast Breeder fuel rods with UO{sub 2}-PuO{sub 2} fuel; Contribucion al analisis del comportamiento termico de las barras combustibles de UO{sub 2}-PuO{sub 2} de los reactores rapidos

    Energy Technology Data Exchange (ETDEWEB)

    Lopez Jimenez, J.; Elbel, H.

    1977-07-01

    The fuel of Fast Breeder Reactors which consists of Uranium and Plutonium dioxide is mainly characterized by the amount and distribution of void volume and Plutonium and the amount of oxygen. Irradiation experiments carried out with this fuel have shown that initial structure of the fuel pellet is subjected to large changes during operation. These are consequences of the radial and axial temperature gradients within the fuel rods. (Author) 54 refs.

  8. Component and Technology Development for Advanced Liquid Metal Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Mark [Univ. of Wisconsin, Madison, WI (United States)

    2017-01-30

    The following report details the significant developments to Sodium Fast Reactor (SFR) technologies made throughout the course of this funding. This report will begin with an overview of the sodium loop and the improvements made over the course of this research to make it a more advanced and capable facility. These improvements have much to do with oxygen control and diagnostics. Thus a detailed report of advancements with respect to the cold trap, plugging meter, vanadium equilibration loop, and electrochemical oxygen sensor is included. Further analysis of the university’s moving magnet pump was performed and included in a section of this report. A continuous electrical resistance based level sensor was built and tested in the sodium with favorable results. Materials testing was done on diffusion bonded samples of metal and the results are presented here as well. A significant portion of this work went into the development of optical fiber temperature sensors which could be deployed in an SFR environment. Thus, a section of this report presents the work done to develop an encapsulation method for these fibers inside of a stainless steel capillary tube. High temperature testing was then done on the optical fiber ex situ in a furnace. Thermal response time was also explored with the optical fiber temperature sensors. Finally these optical fibers were deployed successfully in a sodium environment for data acquisition. As a test of the sodium deployable optical fiber temperature sensors they were installed in a sub-loop of the sodium facility which was constructed to promote the thermal striping effect in sodium. The optical fibers performed exceptionally well, yielding unprecedented 2 dimensional temperature profiles with good temporal resolution. Finally, this thermal striping loop was used to perform cross correlation velocimetry successfully over a wide range of flow rates.

  9. The efficiency of two anaerobic reactor components; Eficiencias de dos componentes de un reactor anaerobio

    Energy Technology Data Exchange (ETDEWEB)

    Vazquez Borges, E.; Mendez Novelo, R.; Magana Pietra, A. [Facultad de Ingenieria. Universidad de Yucatan (Mexico); Martinez Pereda, P.; Fernandez Villagomez, G. [Universidad Nacional Autonoma de Mexico. Division de Estudios de posgrado de la Facultad de Ingenieria. Mexico (Mexico)

    1997-09-01

    This study examined the behaviour of an anaerobic digester in treating pig farm sewage. The experimental model consisted of a UASB reactor at the bottom and a high-rate sedimentator at the top with a total capacity of 534 litres. The digester was installed on a pig farm and its performance under different operating conditions was determined, with hydraulic retention time (HRT) as the critical parameter for evaluating the anaerobic system`s efficiency. The results obtained during the experiment to establish the critical operating parameters are reported. The organic loads applied for a HRT of 1 day were 7.3 kg/m``3/day of total DQO and 3 kg/m``3/day of soluble DQO, following organic matter removal rates (as total DQO) of 36% and 49% respectively and removal rates (as soluble DQO) of 74% in the UASB and 8% in the sedimentator. The efficiency of the reactor as a whole at this HRT time was a removal rate of 74% of total DQO and 75% of soluble DQO. (Author) 25 refs.

  10. Tridimensional ultrasonic images analysis for the in service inspection of fast breeder reactors; Analyse d'images tridimensionnelles ultrasonores pour l'inspection en service des reacteurs a neutrons rapides

    Energy Technology Data Exchange (ETDEWEB)

    Dancre, M

    1999-11-01

    Tridimensional image analysis provides a set of methods for the intelligent extraction of information in order to visualize, recognize or inspect objects in volumetric images. In this field of research, we are interested in algorithmic and methodological aspects to extract surface visual information embedded in volume ultrasonic images. The aim is to help a non-acoustician operator, possibly the system itself, to inspect surfaces of vessel and internals in Fast Breeder Reactors (FBR). Those surfaces are immersed in liquid metal, what justifies the ultrasonic technology choice. We expose firstly a state of the art on the visualization of volume ultrasonic images, the methods of noise analysis, the geometrical modelling for surface analysis and finally curves and surfaces matching. These four points are then inserted in a global analysis strategy that relies on an acoustical analysis (echoes recognition), an object analysis (object recognition and reconstruction) and a surface analysis (surface defects detection). Few literature can be found on ultrasonic echoes recognition through image analysis. We suggest an original method that can be generalized to all images with structured and non-structured noise. From a technical point of view, this methodology applied to echoes recognition turns out to be a cooperative approach between morphological mathematics and snakes (active contours). An entropy maximization technique is required for volumetric data binarization. (author)

  11. Study on radiation damage to high energy accelerator components by irradiation in a nuclear reactor

    CERN Document Server

    Schönbacher, Helmut; Casta, J; Van de Voorde, M H

    1975-01-01

    The structural and other components used in high energy accelerators are continuously exposed to a wide spectrum of high energy particles and electromagnetic radiation. The resulting radiation damage may severely influence the functional capability of accelerator facilities. In order to arrive at an estimate of the service life of various materials in the radiation field, simulating experiments have to be carried out in a nuclear reactor. A large number of organic and inorganic materials, electronic components, metals, etc., intended specifically for use in 400 GeV proton synchrotron of CERN near Geneva, were irradiated in the ASTRA reactor in Seibersdorf near Vienna. The paper reports on the irradiation facilities available in this reactor for this purpose, on the dosimetry methods used, on the most important materials irradiated and on the results obtained in these experiments. (14 refs).

  12. Laser fusion driven breeder design study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Berwald, D.H.; Massey, J.V.

    1980-12-01

    The results of the Laser Fusion Breeder Design Study are given. This information primarily relates to the conceptual design of an inertial confinement fusion (ICF) breeder reactor (or fusion-fission hybrid) based upon the HYLIFE liquid metal wall protection concept developed at Lawrence Livermore National Laboratory. The blanket design for this breeder is optimized to both reduce fissions and maximize the production of fissile fuel for subsequent use in conventional light water reactors (LWRs). When the suppressed fission blanket is compared with its fast fission counterparts, a minimal fission rate in the blanket results in a unique reactor safety advantage for this concept with respect to reduced radioactive inventory and reduced fission product decay afterheat in the event of a loss-of-coolant-accident.

  13. 77 FR 16270 - Updated Aging Management Criteria for Reactor Vessel Internal Components of Pressurized Water...

    Science.gov (United States)

    2012-03-20

    ... COMMISSION Updated Aging Management Criteria for Reactor Vessel Internal Components of Pressurized Water... license renewal interim staff guidance (LR-ISG), LR-ISG-2011-04, ``Updated Aging Management Criteria for... Aging Lessons Learned (GALL) Report for the aging management of stainless steel structures and...

  14. Analysis of Removal Alternatives for the Heavy Water Components Test Reactor at the Savannah River Site

    Energy Technology Data Exchange (ETDEWEB)

    Owen, M.B. [Westinghouse Savannah River Co., Aiken, SC (United States)

    1996-08-01

    This engineering study was developed to evaluate different options for decommissioning of the Heavy Water Components Test Reactor (HWCTR) at the Savannah River Site. This document will be placed in the DOE-SRS Area reading rooms for a period of 30 days in order to obtain public input to plans for the demolition of HWCTR.

  15. Thermal aging of some decommissioned reactor components and methodology for life prediction

    Energy Technology Data Exchange (ETDEWEB)

    Chung, H.M.

    1989-03-01

    Since a realistic aging of cast stainless steel components for end-of-life or life-extension conditions cannot be produced, it is customary to simulate the thermal aging embrittlement by accelerated aging at /approximately/400/degree/C. In this investigation, field components obtained from decommissioned reactors have been examined after service up to 22 yr to provide a benchmark of the laboratory simulation. The primary and secondary aging processes were found to be identical to those of the laboratory-aged specimens, and the kinetic characteristics were also similar. The extent of the aging embrittlement processes and other key factors that are known to influence the embrittlement kinetics have been compared for the decommissioned reactor components and materials aged under accelerated conditions. On the basis of the study, a mechanistic understanding of the causes of the complex behavior in kinetics and activation energy of aging (i.e., the temperature dependence of aging embrittlement between the accelerated and reactor-operating conditions) is presented. A mechanistic correlation developed thereon is compared with a number of available empirical correlations to provide an insight for development of a better methodology of life prediction of the reactor components. 18 refs., 18 figs., 5 tabs.

  16. COMPARISON OF COOLING SCHEMES FOR HIGH HEAT FLUX COMPONENTS COOLING IN FUSION REACTORS

    Directory of Open Access Journals (Sweden)

    Phani Kumar Domalapally

    2015-04-01

    Full Text Available Some components of the fusion reactor receives high heat fluxes either during the startup and shutdown or during the operation of the machine. This paper analyzes different ways of enhancing heat transfer using helium and water for cooling of these high heat flux components and then conclusions are drawn to decide the best choice of coolant, for usage in near and long term applications.

  17. Irradiation of Electronic Components and Circuits at the Portuguese Research Reactor: Lessons Learned

    Science.gov (United States)

    Marques, J. G.; Ramos, A. R.; Fernandes, A. C.; Santos, J. P.

    2016-06-01

    A program was started in 1999 in the Portuguese Research Reactor to test electronics components and circuits for the LHC facility at CERN, initially with a dedicated in-pool irradiation container used at a reactor power of 2 kW and later an irradiation chamber outside the pool, with tailored neutron and gamma filters that could be used at 1 MW. Practice has shown the need to introduce several improvements to the irradiation procedures and infrastructures over the years. In this paper, we review the lessons learned and the major improvements introduced.

  18. IAEA coordinated research program on `harmonization and validation of fast reactor thermomechanical and thermohydraulic codes using experimental data`. 1. Thermohydraulic benchmark analysis on high-cycle thermal fatigue events occurred at French fast breeder reactor Phenix

    Energy Technology Data Exchange (ETDEWEB)

    Muramatsu, Toshiharu [Power Reactor and Nuclear Fuel Development Corp., Oarai, Ibaraki (Japan). Oarai Engineering Center

    1997-06-01

    A benchmark exercise on `Tee junction of Liquid Metal Fast Reactor (LMFR) secondary circuit` was proposed by France in the scope of the said Coordinated Research Program (CRP) via International Atomic Energy Agency (IAEA). The physical phenomenon chosen here deals with the mixture of two flows of different temperature. In a LMFR, several areas of the reactor are submitted to this problem. They are often difficult to design, because of the complexity of the phenomena involved. This is one of the major problems of the LMFRs. This problem has been encountered in the Phenix reactor on the secondary loop, where defects in a tee junction zone were detected during a campaign of inspections after an operation of 90,000 hours of the reactor. The present benchmark is based on an industrial problem and deal with thermal striping phenomena. Problems on pipes induced by thermal striping phenomena have been observed in some reactors and experimental facilities coolant circuits. This report presents numerical results on thermohydraulic characteristics of the benchmark problem, carried out using a direct numerical simulation code DINUS-3 and a boundary element code BEMSET. From the analysis with both the codes, it was confirmed that the hot sodium from the small pipe rise into the cold sodium of the main pipe with thermally instabilities. Furthermore, it was indicated that the coolant mixing region including the instabilities agrees approximately with the result by eye inspections. (author)

  19. Simulating the behaviour of zirconium-alloy components in nuclear reactors

    Energy Technology Data Exchange (ETDEWEB)

    Coleman, C.E

    2001-12-01

    To prevent failure in nuclear components one needs to understand the interactions between adjacent materials and the changes in their physical properties during all phases of reactor operation. Three examples from CANDU reactors are described to illustrate the use of simulations that imitate complicated reactor situations. These are: swelling tests that led to a method for increasing the tolerance or Zircaloy fuel cladding to power ramps; observations of the behaviour of leaking cracks in Zr-2.5Nb pressure tubes that provide confidence in the use of leak-before-break as part of the defence against flaw development; and contact boiling tests on modifications to the surfaces of Zircaloy calandria tubes that enhance the ability of the heavy water moderator to act as a heat sink after a postulated loss-of-coolant accident. (author)

  20. Reactor Safety Gap Evaluation of Accident Tolerant Components and Severe Accident Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Farmer, Mitchell T. [Argonne National Lab. (ANL), Argonne, IL (United States); Bunt, R. [Southern Nuclear, Atlanta, GA (United States); Corradini, M. [Univ. of Wisconsin, Madison, WI (United States); Ellison, Paul B. [GE Power and Water, Duluth, GA (United States); Francis, M. [Argonne National Lab. (ANL), Argonne, IL (United States); Gabor, John D. [Erin Engineering, Walnut Creek, CA (United States); Gauntt, R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Henry, C. [Fauske and Associates, Burr Ridge, IL (United States); Linthicum, R. [Exelon Corp., Chicago, IL (United States); Luangdilok, W. [Fauske and Associates, Burr Ridge, IL (United States); Lutz, R. [PWR Owners Group (PWROG); Paik, C. [Fauske and Associates, Burr Ridge, IL (United States); Plys, M. [Fauske and Associates, Burr Ridge, IL (United States); Rabiti, Cristian [Idaho National Lab. (INL), Idaho Falls, ID (United States); Rempe, J. [Rempe and Associates LLC, Idaho Falls, ID (United States); Robb, K. [Argonne National Lab. (ANL), Argonne, IL (United States); Wachowiak, R. [Electric Power Research Inst. (EPRI), Knovville, TN (United States)

    2015-01-31

    The overall objective of this study was to conduct a technology gap evaluation on accident tolerant components and severe accident analysis methodologies with the goal of identifying any data and/or knowledge gaps that may exist, given the current state of light water reactor (LWR) severe accident research, and additionally augmented by insights obtained from the Fukushima accident. The ultimate benefit of this activity is that the results can be used to refine the Department of Energy’s (DOE) Reactor Safety Technology (RST) research and development (R&D) program plan to address key knowledge gaps in severe accident phenomena and analyses that affect reactor safety and that are not currently being addressed by the industry or the Nuclear Regulatory Commission (NRC).

  1. Requirements for Prognostic Health Management of Passive Components in Advanced Small Modular Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, Ryan M.; Coble, Jamie B.; Ramuhalli, Pradeep

    2013-08-01

    Advanced small modular reactors (aSMRs), which are based on modularization of advanced reactor concepts, may provide a longer-term alternative to traditional light-water reactors and near term small modular reactors (SMRs), which are based on integral pressurized water reactor (iPWR) concepts. aSMRs are conceived for applications in remote locations and for diverse missions that include providing process or district heating, water desalination, and hydrogen production. Several challenges exist with respect to cost-effective operations and maintenance (O&M) of aSMRs, including the impacts of aggressive operating environments and modularity, and limiting these costs and staffing needs will be essential to ensuring the economic feasibility of aSMR deployment. In this regard, prognostic health management (PHM) systems have the potential to play a vital role in supporting the deployment of aSMR systems. This paper identifies requirements and technical gaps associated with implementation of PHM systems for passive aSMR components.

  2. Development of Underwater Laser Cladding and Underwater Laser Seal Welding Techniques for Reactor Components

    Science.gov (United States)

    Hino, Takehisa; Tamura, Masataka; Tanaka, Yoshimi; Kouno, Wataru; Makino, Yoshinobu; Kawano, Shohei; Matsunaga, Keiji

    Stress corrosion cracking (SCC) has been reported at the aged components in many nuclear power plants. Toshiba has been developing the underwater laser welding. This welding technique can be conducted without draining the water in the reactor vessel. It is beneficial for workers not to exposure the radiation. The welding speed can be attaining twice as fast as that of Gas Tungsten Arc Welding (GTAW). The susceptibility of SCC can also be lower than the Alloy 600 base metal.

  3. Engineering aspects of heterogeneous and homogeneous reactors

    Energy Technology Data Exchange (ETDEWEB)

    Dickson, Jr, P W

    1977-01-01

    The core arrangement in an LMFBR can potentially affect the lower internals, upper internals, radial shielding, vessel, hot leg transients, head access area and control systems as well as breeding ratio, doubling time and core inventory. This paper describes the results of a study of the impact on these components and parameters that would result if the Clinch River Breeder Reactor were to incorporate a heterogeneous core.

  4. Swelling in light water reactor internal components: Insights from computational modeling

    Energy Technology Data Exchange (ETDEWEB)

    Stoller, Roger E. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Barashev, Alexander V. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States); Golubov, Stanislav I. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-08-01

    A modern cluster dynamics model has been used to investigate the materials and irradiation parameters that control microstructural evolution under the relatively low-temperature exposure conditions that are representative of the operating environment for in-core light water reactor components. The focus is on components fabricated from austenitic stainless steel. The model accounts for the synergistic interaction between radiation-produced vacancies and the helium that is produced by nuclear transmutation reactions. Cavity nucleation rates are shown to be relatively high in this temperature regime (275 to 325°C), but are sensitive to assumptions about the fine scale microstructure produced under low-temperature irradiation. The cavity nucleation rates observed run counter to the expectation that void swelling would not occur under these conditions. This expectation was based on previous research on void swelling in austenitic steels in fast reactors. This misleading impression arose primarily from an absence of relevant data. The results of the computational modeling are generally consistent with recent data obtained by examining ex-service components. However, it has been shown that the sensitivity of the model s predictions of low-temperature swelling behavior to assumptions about the primary damage source term and specification of the mean-field sink strengths is somewhat greater that that observed at higher temperatures. Further assessment of the mathematical model is underway to meet the long-term objective of this research, which is to provide a predictive model of void swelling at relevant lifetime exposures to support extended reactor operations.

  5. Experimental study on corrosion and precipitation in non-isothermal Pb-17Li system for development of liquid breeder blanket of fusion reactor

    Science.gov (United States)

    Kondo, Masatoshi; Ishii, Masaomi; Norimatsu, Takayoshi; Muroga, Takeo

    2017-07-01

    The corrosion characteristics of RAFM steel JLF-1 in a non-isothermal Pb-17Li flowing system were investigated by means of the corrosion test using a non-isothermal mixing pot. The corrosion test was performed at 739K with a temperature gradient of 14K for 500 hours. The corrosion tests at a static and a flowing conditions in an isothermal Pb-17Li system were also performed at the same temperature for the same duration with the non-isothermal test. Then, the effect of mass transfer both by the flow and the temperature gradient on the corrosion behaviors was featured by the comparison of these results. The corrosion was caused by the dissolution of Fe and Cr from the steel surface into the flowing Pb-17Li. The specimen surface revealed a fine granular microstructure after the corrosion tests. A large number of pebbleshaped protrusions were observed on the specimen surface. This microstructure was different from the original martensite microstructure of the steel, and might be formed by the influence of the reaction with Li component in the alloy. The formation of the granular microstructure was accelerated by the flow and the temperature gradient. Some pebble-shaped protrusions had gaps at their bases. The removal of these pebble-shaped granules by the flowing Pb-17Li might cause a small-scale corrosion-erosion. The results of metallurgical analysis indicated that a large-scale corrosion-erosion was also caused by their destruction of the corroded layer on the surface. The non-isothermal mixing pot equipped a cold trap by a metal mesh in the low temperature region. The metal elements of Fe and Cr were recovered as they precipitated on the surface of the metal mesh. It was found that a Fe-Cr binary intermetallic compound was formed in the precipitation procedure. The overall mass transfer coefficient for the dissolution type corrosion in the non-isothermal system was much bigger than that in the isothermal system. This model evaluation indicated that the temperature

  6. ITER solid breeder blanket materials database

    Energy Technology Data Exchange (ETDEWEB)

    Billone, M.C. [Argonne National Lab., IL (United States); Dienst, W. [Kernforschungszentrum Karlsruhe GmbH (Germany). Inst. fuer Material- und Festkoerperforschung; Flament, T. [CEA Centre d`Etudes de Fontenay-aux-Roses (France). Commissariat A L`Energie Atomique; Lorenzetto, P. [NET Team, Garching (Germany); Noda, K. [Japan Atomic Energy Research Inst., Takai, Ibaraki, (Japan); Roux, N. [CEA Centre d`Etudes et de Recherches Les Materiaux (France). Commissariat a L`Energie Atomique

    1993-11-01

    The databases for solid breeder ceramics (Li{sub 2},O, Li{sub 4}SiO{sub 4}, Li{sub 2}ZrO{sub 3} and LiAlO{sub 2}) and beryllium multiplier material are critically reviewed and evaluated. Emphasis is placed on physical, thermal, mechanical, chemical stability/compatibility, tritium, and radiation stability properties which are needed to assess the performance of these materials in a fusion reactor environment. Correlations are selected for design analysis and compared to the database. Areas for future research and development in blanket materials technology are highlighted and prioritized.

  7. Structural integrity and management of aging in internal components of BWR reactors; Integridad estructural y manejo del envejecimiento en componentes internos de reactores BWR

    Energy Technology Data Exchange (ETDEWEB)

    Arganis J, C.R. [Instituto Nacional de Investigaciones Nucleares, Km 36.5 Carretera Mexico, Toluca Salazar Edo. de Mexico (Mexico)]. E-mail: craj@nuclear.inin.mx

    2004-07-01

    Presently work the bases to apply structural integrity and the handling of the aging of internal components of the pressure vessel of boiling water reactors of water are revised and is carried out an example of structural integrity in the horizontal welding H4 of the encircling one of the core of a reactor, taking data reported in the literature. It is also revised what is required to carry out the handling program or conduct of the aging (AMP). (Author)

  8. Training experience at Experimental Breeder Reactor II

    Energy Technology Data Exchange (ETDEWEB)

    Driscoll, J.W.; McCormick, R.P.; McCreery, H.I.

    1978-01-01

    The EBR-II Training Group develops, maintains,and oversees training programs and activities associated with the EBR-II Project. The group originally spent all its time on EBR-II plant-operations training, but has gradually spread its work into other areas. These other areas of training now include mechanical maintenance, fuel manufacturing facility, instrumentation and control, fissile fuel handling, and emergency activities. This report describes each of the programs and gives a statistical breakdown of the time spent by the Training Group for each program. The major training programs for the EBR-II Project are presented by multimedia methods at a pace controlled by the student. The Training Group has much experience in the use of audio-visual techniques and equipment, including video-tapes, 35 mm slides, Super 8 and 16 mm film, models, and filmstrips. The effectiveness of these techniques is evaluated in this report.

  9. Liquid Metal Fast Breeder Reactors: a bibliography

    Energy Technology Data Exchange (ETDEWEB)

    Raleigh, H.D. (ed.)

    1980-11-01

    This bibliography includes 5465 selected citations on LMFBR development. The citations were compiled from the DOE Energy Data Base covering the period January 1978 (EDB File No. 78R1087) through August 1980 (EDB File No. 80C79142). The references are to reports from the Department of Energy and its contractors, reports from other government or private organizations, and journal articles, books, conference papers, and monographs from US originators. Report citations are arranged alphanumerically by report number; nonreport literature citations are arranged chronologically. Corporate, Personal Author, Subject, and Report Number Indexes are provided in Volume 2.

  10. Liquid Metal Fast Breeder Reactors: a bibliography

    Energy Technology Data Exchange (ETDEWEB)

    Raleigh, H.D. (ed.)

    1980-11-01

    This bibliogralphy includes 5465 selected citations on LMFBR development. The citations were compiled from the DOE Energy Data Base covering the period January 1978 (EDB File No. 78R1087) through August 1980 (EDB File No. 80C79142). The references are to reports from the Department of Energy and its contractors, reports from other government or private organizations, and journal articles, books, conference papers, and monographs from US originators. Report citations are arranged alphanumerically by report number; nonreport literature citations are arranged chronologically. Corporate, Personal Author, Subject, and Report Number Indexes are provided in Volume 2.

  11. Development of fiber-delivered laser peening system to prevent stress corrosion cracking of reactor components

    Energy Technology Data Exchange (ETDEWEB)

    Sano, Y.; Kimura, M.; Yoda, M.; Mukai, N.; Sato, K.; Uehara, T.; Ito, T.; Shimamura, M.; Sudo, A.; Suezono, N. [Toshiba Corp., Yokohama (Japan)

    2001-07-01

    The authors have developed a system to deliver water-penetrable intense laser pulses of frequency-doubled Nd:YAG laser through optical fiber. The system is capable of improving a residual stress on water immersed metal material remotely, which is effective to prevent the initiation of stress corrosion cracking (SCC) of reactor components. Experimental results showed that a compressive residual stress with enough amplitude and depth was built in the surface layer of type 304 stainless steel (SUS304) by irradiating laser pulses through optical fiber with diameter of 1 mm. A prototype peening head with miniaturized dimensions of 88 mm x 46 mm x 25 mm was assembled to con-firm the accessibility to the heat affected zone (HAZ) along weld lines of a reactor core shroud. The accessibility was significantly improved owing to the flexible optical fiber and the miniaturized peening head. The fiber delivered system opens up the possibility of new applications of laser peening. (author)

  12. Mechanical properties of thermally aged cast stainless steels from Shippingport reactor components

    Energy Technology Data Exchange (ETDEWEB)

    Chopra, O.K.; Shack, W.J. [Argonne National Lab., IL (United States)

    1995-04-01

    Thermal embrittlement of static-cast CF-8 stainless steel components from the decommissioned Shippingport reactor has been characterized. Cast stainless steel materials were obtained from four cold-leg check valves, three hot-leg main shutoff valves, and two pump volutes. The actual time-at-temperature for the materials was {approximately}13 y at {approximately}281 C (538 F) for the hot-leg components and {approximately}264 C (507 F) for the cold-leg components. Baseline mechanical properties for as-cast material were determined from tests on either recovery-annealed material, i.e., annealed for 1 h at 550 C and then water quenched, or material from the cooler region of the component. The Shippingport materials show modest decreases in fracture toughness and Charpy-impact properties and a small increase in tensile strength because of relatively low service temperatures and ferrite content of the steel. The procedure and correlations developed at Argonne National Laboratory for estimating mechanical properties of cast stainless steels predict accurate or slightly lower values for Charpy-impact energy, tensile flow stress, fracture toughness J-R curve, and J{sub IC} of the materials. The kinetics of thermal embrittlement and degree of embrittlement at saturation, i.e., the minimum impact energy achieved after long-term aging, were established from materials that were aged further in the laboratory. The results were consistent with the estimates. The correlations successfully predicted the mechanical properties of the Ringhals 2 reactor hot and crossover-leg elbows (CF-8M steel) after service of {approximately} 15 y and the KRB reactor pump cover plate (CF-8) after {approximately} 8 y of service.

  13. Mechanical properties of thermally aged cast stainless steels from shippingport reactor components.

    Energy Technology Data Exchange (ETDEWEB)

    Chopra, O. K.; Shack, W. J.; Energy Technology

    1995-06-07

    Thermal embrittlement of static-cast CF-8 stainless steel components from the decommissioned Shippingport reactor has been characterized. Cast stainless steel materials were obtained from four cold-leg check valves, three hot-leg main shutoff valves, and two pump volutes. The actual time-at-temperature for the materials was {approx}13 y at {approx}281 C (538 F) for the hot-leg components and {approx}264 C (507 F) for the cold-leg components. Baseline mechanical properties for as-cast material were determined from tests on either recovery-annealed material, i.e., annealed for 1 h at 550 C and then water quenched, or material from the cooler region of the component. The Shippingport materials show modest decreases in fracture toughness and Charpy-impact properties and a small increase in tensile strength because of relatively low service temperatures and ferrite content of the steel. The procedure and correlations developed at Argonne National Laboratory for estimating mechanical properties of cast stainless steels predict accurate or slightly lower values for Charpy-impact energy, tensile flow stress, fracture toughness J-R curve, and JIC of the materials. The kinetics of thermal embrittlement and degree of embrittlement at saturation, i.e., the minimum impact energy achieved after long-term aging, were established from materials that were aged further in the laboratory. The results were consistent with the estimates. The correlations successfully predicted the mechanical properties of the Ringhals 2 reactor hot- and crossover-leg elbows (CF-8M steel) after service of {approx}15 y and the KRB reactor pump cover plate (CF-8) after {approx}8 y of service.

  14. Facility Configuration Study of the High Temperature Gas-Cooled Reactor Component Test Facility

    Energy Technology Data Exchange (ETDEWEB)

    S. L. Austad; L. E. Guillen; D. S. Ferguson; B. L. Blakely; D. M. Pace; D. Lopez; J. D. Zolynski; B. L. Cowley; V. J. Balls; E.A. Harvego, P.E.; C.W. McKnight, P.E.; R.S. Stewart; B.D. Christensen

    2008-04-01

    A test facility, referred to as the High Temperature Gas-Cooled Reactor Component Test Facility or CTF, will be sited at Idaho National Laboratory for the purposes of supporting development of high temperature gas thermal-hydraulic technologies (helium, helium-Nitrogen, CO2, etc.) as applied in heat transport and heat transfer applications in High Temperature Gas-Cooled Reactors. Such applications include, but are not limited to: primary coolant; secondary coolant; intermediate, secondary, and tertiary heat transfer; and demonstration of processes requiring high temperatures such as hydrogen production. The facility will initially support completion of the Next Generation Nuclear Plant. It will secondarily be open for use by the full range of suppliers, end-users, facilitators, government laboratories, and others in the domestic and international community supporting the development and application of High Temperature Gas-Cooled Reactor technology. This pre-conceptual facility configuration study, which forms the basis for a cost estimate to support CTF scoping and planning, accomplishes the following objectives: • Identifies pre-conceptual design requirements • Develops test loop equipment schematics and layout • Identifies space allocations for each of the facility functions, as required • Develops a pre-conceptual site layout including transportation, parking and support structures, and railway systems • Identifies pre-conceptual utility and support system needs • Establishes pre-conceptual electrical one-line drawings and schedule for development of power needs.

  15. A review of the US joining technologies for plasma facing components in the ITER fusion reactor

    Energy Technology Data Exchange (ETDEWEB)

    Odegard, B.C. Jr.; Cadden, C.H. [Sandia National Labs., Livermore, CA (United States); Watson, R.D. [Sandia National Labs., Albuquerque, NM (United States); Slattery, K.T. [Boeing Co., St. Louis, MO (United States)

    1998-02-01

    This paper is a review of the current joining technologies for plasma facing components in the US for the International Thermonuclear Experimental Reactor (ITER) project. Many facilities are involved in this project. Many unique and innovative joining techniques are being considered in the quest to join two candidate armor plate materials (beryllium and tungsten) to a copper base alloy heat sink (CuNiBe, OD copper, CuCrZr). These techniques include brazing and diffusion bonding, compliant layers at the bond interface, and the use of diffusion barrier coatings and diffusion enhancing coatings at the bond interfaces. The development and status of these joining techniques will be detailed in this report.

  16. 76 FR 16842 - Request for a License To Export Reactor Components

    Science.gov (United States)

    2011-03-25

    ... six AP- Construction, China. Mechanical Corporation. coolant pump 1000 (design) maintenance, and systems, related reactors. operation of AP- equipment, and 1000 (design) spare parts. nuclear reactors...

  17. Relationships between chemical oxygen demand (COD) components and toxicity in a sequential anaerobic baffled reactor/aerobic completely stirred reactor system treating Kemicetine

    Energy Technology Data Exchange (ETDEWEB)

    Sponza, Delia Teresa, E-mail: delya.sponza@deu.edu.tr [Department of Environmental Engineering, Faculty of Engineering, Dokuz Eyluel University, Buca Kaynaklar Campus, Tinaztepe, 35160 Izmir (Turkey); Demirden, Pinar, E-mail: pinar.demirden@kozagold.com [Environmental Engineer, Koza Gold Company, Environmental Department, Ovacik, Bergama Izmir (Turkey)

    2010-04-15

    In this study the interactions between toxicity removals and Kemicetine, COD removals, intermediate products of Kemicetine and COD components (CODs originating from slowly degradable organics, readily degradable organics, inert microbial products and from the inert compounds) were investigated in a sequential anaerobic baffled reactor (ABR)/aerobic completely stirred tank reactor (CSTR) system with a real pharmaceutical wastewater. The total COD and Kemicetine removal efficiencies were 98% and 100%, respectively, in the sequential ABR/CSTR systems. 2-Amino-1 (p-nitrophenil)-1,3 propanediol, l-p-amino phenyl, p-amino phenol and phenol were detected in the ABR as the main readily degradable inter-metabolites. In the anaerobic ABR reactor, the Kemicetin was converted to corresponding inter-metabolites and a substantial part of the COD was removed. In the aerobic CSTR reactor the inter-metabolites produced in the anaerobic reactor were completely removed and the COD remaining from the anerobic reactor was biodegraded. It was found that the COD originating from the readily degradable organics did not limit the anaerobic degradation process, while the CODs originating from the slowly degradable organics and from the inert microbial products significantly decreased the anaerobic ABR reactor performance. The acute toxicity test results indicated that the toxicity decreased from the influent to the effluent of the aerobic CSTR reactor. The ANOVA test statistics showed that there was a strong linear correlation between acute toxicity, CODs originating from the slowly degradable organics and inert microbial products. A weak correlation between acute toxicity and CODs originating from the inert compounds was detected.

  18. Mechanical-property degradation of cast stainless steel components from the Shippingport reactor

    Energy Technology Data Exchange (ETDEWEB)

    Chopra, O.K.

    1991-10-01

    The mechanical properties of cast stainless steels from the Shippingport reactor have been characterized. Baseline properties for unaged materials were obtained from tests on either recovery-annealed material or material from a cooler region of the component. The materials exhibited modest decrease in impact energy and fracture toughness and a small increase in tensile strength. The fracture toughness J-R curve, J{sub IC} value, tensile flow stress, and Charpy-impact energy of the materials showed very good agreement with estimations based on accelerated laboratory aging studies. The kinetics of thermal embrittlement and degree of embrittlement at saturation, i.e., the minimum impact energy that would be achieved after long-term aging, were established from materials that were aged further in the laboratory at temperatures between 320 and 400{degrees}C. The results showed very good agreement with estimates; the activation energies ranged from 125 to 250 kJ/mole and the minimum room temperature impact energy was <75 J/cm{sup 2}. The estimated impact energy and fracture toughness J-R curve for materials from the Ringhals reactor hot and crossover-leg elbows are also presented.

  19. Research of lithium capillary-pore systems for fusion reactor plasma facing components

    Energy Technology Data Exchange (ETDEWEB)

    Evtikhin, V.A. E-mail: evtikhin@protein.bio.msu.ru; Vertkov, A.V.; Lyublinski, I.E.; Khripunov, B.I.; Petrov, V.B.; Mirnov, S.V

    2002-12-01

    To date there is no adequate solution for high heat load plasma facing components of the next step fusion reactor among solid material options. A lithium-filled capillary porous systems (CPS) was proposed as a plasma facing material and experimental work on this subject is now in progress. Steady-state experiments with CPS-based target and lithium supply systems have shown successful operation at heat fluxes of 1-10 MW/m{sup 2} during several hours. Experimental data is obtained on lithium CPS stability at heat flux up to 25-50 MW/m{sup 2}. The lithium CPS behaviour in contact with real tokamak plasma is considered for normal discharge condition at 10 MW/m{sup 2} and for plasma disruption at 15 MJ/m{sup 2}. Erosion mechanism of lithium under tokamak plasma impact was analysed. Stability of lithium CPS in tokamak conditions was shown.

  20. Failure prediction of full-size reactor components from tensile specimen data on NBG-18 nuclear graphite

    Energy Technology Data Exchange (ETDEWEB)

    Hindley, Michael P., E-mail: makke@mweb.co.za [Pebble Bed Modular Reactor (Pty) Ltd., P.O. Box 9396, Centurion 0046 (South Africa); Blaine, Deborah C.; Groenwold, Albert A.; Becker, Thorsten H. [Department of Mechanical and Mechatronic Engineering, Stellenbosch University, Private Bag X1, Matieland 7602 (South Africa)

    2015-04-01

    Highlights: • Predicts failure on a full scale reactor component and compare it to experiments. • Shows the effect of volume on NBG-18 nuclear graphite failure prediction. • Provide independent verification of a previously published methodology. • Describe the influence of multiple locations of high stress on failure prediction. - Abstract: This paper concerns itself with predicting the failure of a full-size NBG-18 nuclear graphite reactor component based only on test data obtained from standard tensile test specimens. A full-size specimen structural test was developed to simulate the same failure conditions expected during a normal operation of the reactor in order to validate the failure prediction. The full-size specimen designed for this test is almost a hundred times larger than the tensile test specimen, has a completely different geometry and experiences a different loading condition to the standard tensile test specimen. Failure of the full-size component is predicted realistically, but conservatively.

  1. Approaches to experimental validation of high-temperature gas-cooled reactor components

    Energy Technology Data Exchange (ETDEWEB)

    Belov, S.E. [Joint Stock Company ' Afrikantov OKB Mechanical Engineering' , Burnakovsky Proezd, 15, Nizhny Novgorod 603074 (Russian Federation); Borovkov, M.N., E-mail: borovkov@okbm.nnov.ru [Joint Stock Company ' Afrikantov OKB Mechanical Engineering' , Burnakovsky Proezd, 15, Nizhny Novgorod 603074 (Russian Federation); Golovko, V.F.; Dmitrieva, I.V.; Drumov, I.V.; Znamensky, D.S.; Kodochigov, N.G. [Joint Stock Company ' Afrikantov OKB Mechanical Engineering' , Burnakovsky Proezd, 15, Nizhny Novgorod 603074 (Russian Federation); Baxi, C.B.; Shenoy, A.; Telengator, A. [General Atomics, 3550 General Atomics Court, CA (United States); Razvi, J., E-mail: Junaid.Razvi@ga.com [General Atomics, 3550 General Atomics Court, CA (United States)

    2012-10-15

    Highlights: Black-Right-Pointing-Pointer Computational and experimental investigations of thermal and hydrodynamic characteristics for the equipment. Black-Right-Pointing-Pointer Vibroacoustic investigations. Black-Right-Pointing-Pointer Studies of the electromagnetic suspension system on GT-MHR turbo machine rotor models. Black-Right-Pointing-Pointer Experimental investigations of the catcher bearings design. - Abstract: The special feature of high-temperature gas-cooled reactors (HTGRs) is stressed operating conditions for equipment due to high temperature of the primary circuit helium, up to 950 Degree-Sign C, as well as acoustic and hydrodynamic loads upon the gas path elements. Therefore, great significance is given to reproduction of real operation conditions in tests. Experimental investigation of full-size nuclear power plant (NPP) primary circuit components is not practically feasible because costly test facilities will have to be developed for the power of up to hundreds of megawatts. Under such conditions, the only possible process to validate designs under development is representative tests of smaller scale models and fragmentary models. At the same time, in order to take in to validated account the effect of various physical factors, it is necessary to ensure reproduction of both individual processes and integrated tests incorporating needed integrated investigations. Presented are approaches to experimental validation of thermohydraulic and vibroacoustic characteristics for main equipment components and primary circuit path elements under standard loading conditions, which take account of their operation in the HTGR. Within the framework of the of modular helium reactor project, including a turbo machine in the primary circuit, a new and difficult problem is creation of multiple-bearing flexible vertical rotor. Presented are approaches to analytical and experimental validation of the rotor electromagnetic bearings, catcher bearings, flexible rotor

  2. 10 CFR 110.26 - General license for the export of nuclear reactor components.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false General license for the export of nuclear reactor... NUCLEAR EQUIPMENT AND MATERIAL Licenses § 110.26 General license for the export of nuclear reactor... nuclear power or research reactor in the United States: Austria Belgium Bulgaria Canada Czech Republic...

  3. Technical Needs for Prototypic Prognostic Technique Demonstration for Advanced Small Modular Reactor Passive Components

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, Ryan M.; Coble, Jamie B.; Hirt, Evelyn H.; Ramuhalli, Pradeep; Mitchell, Mark R.; Wootan, David W.; Berglin, Eric J.; Bond, Leonard J.; Henager, Charles H.

    2013-05-17

    This report identifies a number of requirements for prognostics health management of passive systems in AdvSMRs, documents technical gaps in establishing a prototypical prognostic methodology for this purpose, and describes a preliminary research plan for addressing these technical gaps. AdvSMRs span multiple concepts; therefore a technology- and design-neutral approach is taken, with the focus being on characteristics that are likely to be common to all or several AdvSMR concepts. An evaluation of available literature is used to identify proposed concepts for AdvSMRs along with likely operational characteristics. Available operating experience of advanced reactors is used in identifying passive components that may be subject to degradation, materials likely to be used for these components, and potential modes of degradation of these components. This information helps in assessing measurement needs for PHM systems, as well as defining functional requirements of PHM systems. An assessment of current state-of-the-art approaches to measurements, sensors and instrumentation, diagnostics and prognostics is also documented. This state-of-the-art evaluation, combined with the requirements, may be used to identify technical gaps and research needs in the development, evaluation, and deployment of PHM systems for AdvSMRs. A preliminary research plan to address high-priority research needs for the deployment of PHM systems to AdvSMRs is described, with the objective being the demonstration of prototypic prognostics technology for passive components in AdvSMRs. Greater efficiency in achieving this objective can be gained through judicious selection of materials and degradation modes that are relevant to proposed AdvSMR concepts, and for which significant knowledge already exists. These selections were made based on multiple constraints including the analysis performed in this document, ready access to laboratory-scale facilities for materials testing and measurement, and

  4. Design and Fabrication Technique of the Key Components for Very High Temperature Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Ho Jin; Song, Ki Nam; Kim, Yong Wan

    2006-12-15

    The gas outlet temperature of Very High Temperature Reactor (VHTR) may be beyond the capability of conventional metallic materials. The requirement of the gas outlet temperature of 950 .deg. C will result in operating temperatures for metallic core components that will approach very high temperature on some cases. The materials that are capable of withstanding this temperature should be prepared, or nonmetallic materials will be required for limited components. The Ni-base alloys such as Alloy 617, Hastelloy X, XR, Incoloy 800H, and Haynes 230 are being investigated to apply them on components operated in high temperature. Currently available national and international codes and procedures are needed reviewed to design the components for HTGR/VHTR. Seven codes and procedures, including five ASME Codes and Code cases, one French code (RCC-MR), and on British Procedure (R5) were reviewed. The scope of the code and code cases needs to be expanded to include the materials with allowable temperatures of 950 .deg. C and higher. The selection of compact heat exchangers technology depends on the operating conditions such as pressure, flow rates, temperature, but also on other parameters such as fouling, corrosion, compactness, weight, maintenance and reliability. Welding, brazing, and diffusion bonding are considered proper joining processes for the heat exchanger operating in the high temperature and high pressure conditions without leakage. Because VHTRs require high temperature operations, various controlled materials, thick vessels, dissimilar metal joints, and precise controls of microstructure in weldment, the more advanced joining processes are needed than PWRs. The improved solid joining techniques are considered for the IHX fabrication. The weldability for Alloy 617 and Haynes 230 using GTAW and SMAW processes was investigated by CEA.

  5. Fast reactor programme in India

    Indian Academy of Sciences (India)

    2015-09-04

    Sep 4, 2015 ... criteria; passive shutdown and decay heat removal systems; fast breeder reactors in India. PACS No. 28.41.−i. 1. ... water reactors, mainly pressurized heavy water reactors (PHWRs) to extract ∼10 GWe capacity for ..... commissioning phase and most of the supporting systems have been commissioned and.

  6. Fast reactor programme in India

    Indian Academy of Sciences (India)

    2015-09-04

    Sep 4, 2015 ... Home; Journals; Pramana – Journal of Physics; Volume 85; Issue 3. Fast reactor programme in India. P Chellapandi P R ... Keywords. Sodium fast reactor; design challenges; construction challenges; emerging safety criteria; passive shutdown and decay heat removal systems; fast breeder reactors in India.

  7. Biofiltration of paint solvent mixtures in two reactor types: overloading by polar components.

    Science.gov (United States)

    Paca, Jan; Halecky, Martin; Misiaczek, Ondrej; Kozliak, Evguenii I; Jones, Kim

    2012-01-01

    Steady-state performances of a trickle bed reactor (TBR) and a biofilter (BF) in loading experiments with increasing inlet concentrations of polar solvents, acetone, methyl ethyl ketone, methyl isobutyl ketone and n-butyl acetate, were investigated, along with the system's dynamic responses. Throughout the entire experimentation time, a constant loading rate of aromatic components of 4 g(c)·m(-3)·h(-1) was maintained to observe the interactions between the polar substrates and aromatic hydrocarbons. Under low combined substrate loadings, the BF outperformed TBR not only in the removal of aromatic hydrocarbons but also in the removal of polar substrates. However, increasing the loading rate of polar components above the threshold value of 31-36 g(c)·m(-3)·h(-1) resulted in a steep and significant drop in the removal efficiencies of both polar (except for butyl acetate) and hydrophobic components, which was more pronounced in the BF; so the relative TBR/BF efficiency became reversed under such overloading conditions. A step-drop of the overall OL(POLAR) (combined loading by polar air pollutants) from overloading values to 7 g(c)·m(-3)·h(-1) resulted in an increase of all pollutant removal efficiencies, although in TBR the recovery was preceded by lag periods lasting between 5 min (methyl ethyl ketone) to 3.7 h (acetone). The occurrence of lag periods in the TBR recovery was, in part, due to the saturation of mineral medium with water-soluble polar solvents, particularly, acetone. The observed bioreactor behavior was consistent with the biological steps being rate-limiting.

  8. Selection of Breeding Stock among Australian Purebred Dog Breeders, with Particular Emphasis on the Dam

    Directory of Open Access Journals (Sweden)

    Veronika Czerwinski

    2016-11-01

    Full Text Available Every year, thousands of purebred domestic dogs are bred by registered dog breeders. Yet, little is known about the rearing environment of these dogs, or the attitudes and priorities surrounding breeding practices of these dog breeders. The objective of this study was to explore some of the factors that dog breeders consider important for stock selection, with a particular emphasis on issues relating to the dam. Two-hundred and seventy-four Australian purebred dog breeders, covering 91 breeds across all Australian National Kennel Club breed groups, completed an online survey relating to breeding practices. Most breeders surveyed (76% reported specialising in one breed of dog, the median number of dogs and bitches per breeder was two and three respectively, and most breeders bred two litters or less a year. We identified four components, relating to the dam, that were considered important to breeders. These were defined as Maternal Care, Offspring Potential, Dam Temperament, and Dam Genetics and Health. Overall, differences were observed in attitudes and beliefs across these components, showing that there is variation according to breed/breed groups. In particular, the importance of Maternal Care varied according to dog breed group. Breeders of brachycephalic breeds tended to differ the most in relation to Offspring Potential and Dam Genetics and Health. The number of breeding dogs/bitches influenced breeding priority, especially in relation to Dam Temperament, however no effect was found relating to the number of puppies bred each year. Only 24% of breeders used their own sire for breeding. The finding that some breeders did not test for diseases relevant to their breed, such as hip dysplasia in Labrador Retrievers and German Shepherds, provides important information on the need to educate some breeders, and also buyers of purebred puppies, that screening for significant diseases should occur. Further research into the selection of breeding dams

  9. Selection of Breeding Stock among Australian Purebred Dog Breeders, with Particular Emphasis on the Dam.

    Science.gov (United States)

    Czerwinski, Veronika; McArthur, Michelle; Smith, Bradley; Hynd, Philip; Hazel, Susan

    2016-11-16

    Every year, thousands of purebred domestic dogs are bred by registered dog breeders. Yet, little is known about the rearing environment of these dogs, or the attitudes and priorities surrounding breeding practices of these dog breeders. The objective of this study was to explore some of the factors that dog breeders consider important for stock selection, with a particular emphasis on issues relating to the dam. Two-hundred and seventy-four Australian purebred dog breeders, covering 91 breeds across all Australian National Kennel Club breed groups, completed an online survey relating to breeding practices. Most breeders surveyed (76%) reported specialising in one breed of dog, the median number of dogs and bitches per breeder was two and three respectively, and most breeders bred two litters or less a year. We identified four components, relating to the dam, that were considered important to breeders. These were defined as Maternal Care, Offspring Potential, Dam Temperament, and Dam Genetics and Health. Overall, differences were observed in attitudes and beliefs across these components, showing that there is variation according to breed/breed groups. In particular, the importance of Maternal Care varied according to dog breed group. Breeders of brachycephalic breeds tended to differ the most in relation to Offspring Potential and Dam Genetics and Health. The number of breeding dogs/bitches influenced breeding priority, especially in relation to Dam Temperament, however no effect was found relating to the number of puppies bred each year. Only 24% of breeders used their own sire for breeding. The finding that some breeders did not test for diseases relevant to their breed, such as hip dysplasia in Labrador Retrievers and German Shepherds, provides important information on the need to educate some breeders, and also buyers of purebred puppies, that screening for significant diseases should occur. Further research into the selection of breeding dams and sires will

  10. Bulk-bronzied graphites for plasma-facing components in ITER (International Thermonuclear Experimental Reactor)

    Energy Technology Data Exchange (ETDEWEB)

    Hirooka, Y.; Conn, R.W.; Doerner, R.; Khandagle, M. (California Univ., Los Angeles, CA (USA). Inst. of Plasma and Fusion Research); Causey, R.; Wilson, K. (Sandia National Labs., Livermore, CA (USA)); Croessmann, D.; Whitley, J. (Sandia National Labs., Albuquerque, NM (USA)); Holland, D.; Smolik, G. (Idaho National Engineering Lab., Idaho Falls, ID (USA)); Matsuda, T.; Sogabe, T. (Toyo Tanso Co. Ltd., O

    1990-06-01

    Newly developed bulk-boronized graphites and boronized C-C composites with a total boron concentration ranging from 1 wt % to 30 wt % have been evaluated as plasma-facing component materials for the International Thermonuclear Experimental Reactor (ITER). Bulk-boronized graphites have been bombarded with high-flux deuterium plasmas at temperatures between 200 and 1600{degree}C. Plasma interaction induced erosion of bulk-boronized graphites is observed to be a factor of 2--3 smaller than that of pyrolytic graphite, in regimes of physical sputtering, chemical sputtering and radiation enhanced sublimation. Postbombardment thermal desorption spectroscopy indicates that bulk-boronized graphites enhance recombinative desorption of deuterium, which leads to a suppression of the formation of deuterocarbon due to chemical sputtering. The tritium inventory in graphite has been found to decrease by an order of magnitude due to 10 wt % bulk-boronization at temperatures above 1000{degree}C. The critical heat flux to induce cracking for bulk-boronized graphites has been found to be essentially the same as that for non-boronized graphites. Also, 10 wt % bulk-boronization of graphite hinders air oxidation nearly completely at 800{degree}C and reduces the steam oxidation rate by a factor of 2--3 at around 1100 and 1350{degree}C. 38 refs., 5 figs.

  11. Final Report: Safety of Plasma Components and Aerosol Transport During Hard Disruptions and Accidental Energy Release in Fusion Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Bourham, Mohamed A.; Gilligan, John G.

    1999-08-14

    Safety considerations in large future fusion reactors like ITER are important before licensing the reactor. Several scenarios are considered hazardous, which include safety of plasma-facing components during hard disruptions, high heat fluxes and thermal stresses during normal operation, accidental energy release, and aerosol formation and transport. Disruption events, in large tokamaks like ITER, are expected to produce local heat fluxes on plasma-facing components, which may exceed 100 GW/m{sup 2} over a period of about 0.1 ms. As a result, the surface temperature dramatically increases, which results in surface melting and vaporization, and produces thermal stresses and surface erosion. Plasma-facing components safety issues extends to cover a wide range of possible scenarios, including disruption severity and the impact of plasma-facing components on disruption parameters, accidental energy release and short/long term LOCA's, and formation of airborne particles by convective current transport during a LOVA (water/air ingress disruption) accident scenario. Study, and evaluation of, disruption-induced aerosol generation and mobilization is essential to characterize database on particulate formation and distribution for large future fusion tokamak reactor like ITER. In order to provide database relevant to ITER, the SIRENS electrothermal plasma facility at NCSU has been modified to closely simulate heat fluxes expected in ITER.

  12. EBR-II Reactor Physics Benchmark Evaluation Report

    Energy Technology Data Exchange (ETDEWEB)

    Pope, Chad L. [Idaho State Univ., Pocatello, ID (United States); Lum, Edward S [Idaho State Univ., Pocatello, ID (United States); Stewart, Ryan [Idaho State Univ., Pocatello, ID (United States); Byambadorj, Bilguun [Idaho State Univ., Pocatello, ID (United States); Beaulieu, Quinton [Idaho State Univ., Pocatello, ID (United States)

    2017-12-28

    This report provides a reactor physics benchmark evaluation with associated uncertainty quantification for the critical configuration of the April 1986 Experimental Breeder Reactor II Run 138B core configuration.

  13. 78 FR 57904 - Request for a License To Export; Reactor Components

    Science.gov (United States)

    2013-09-20

    ..., and 1000 (design) spare parts. nuclear reactors. Dated this 16th day of September 2013 in Rockville... eight Construction, China. Mechanical Corporation, August coolant pump AP-1000 (design) maintenance, and...

  14. Analysis of space reactor system components: Investigation through simulation and non-nuclear testing

    Science.gov (United States)

    Bragg-Sitton, Shannon M.

    The use of fission energy in space power and propulsion systems offers considerable advantages over chemical propulsion. Fission provides over six orders of magnitude higher energy density, which translates to higher vehicle specific impulse and lower specific mass. These characteristics enable ambitious space exploration missions. The natural space radiation environment provides an external source of protons and high energy, high Z particles that can result in the production of secondary neutrons through interactions in reactor structures. Applying the approximate proton source in geosynchronous orbit during a solar particle event, investigation using MCNPX 2.5.b for proton transport through the SAFE-400 heat pipe cooled reactor indicates an incoming secondary neutron current of (1.16 +/- 0.03) x 107 n/s at the core-reflector interface. This neutron current may affect reactor operation during low power maneuvers (e.g., start-up) and may provide a sufficient reactor start-up source. It is important that a reactor control system be designed to automatically adjust to changes in reactor power levels, maintaining nominal operation without user intervention. A robust, autonomous control system is developed and analyzed for application during reactor start-up, accounting for fluctuations in the radiation environment that result from changes in vehicle location or to temporal variations in the radiation field. Development of a nuclear reactor for space applications requires a significant amount of testing prior to deployment of a flight unit. High confidence in fission system performance can be obtained through relatively inexpensive non-nuclear tests performed in relevant environments, with the heat from nuclear fission simulated using electric resistance heaters. A series of non-nuclear experiments was performed to characterize various aspects of reactor operation. This work includes measurement of reactor core deformation due to material thermal expansion and

  15. Conversion of Tobacco Biomass to Flavor Components by Means of Microwave and Parr Reactors

    Directory of Open Access Journals (Sweden)

    Ara Katayoun Mahdavi

    2017-04-01

    Full Text Available In the present work, microwave and Parr reactors were utilized for synthesis of pyrazines from plant-based biomass in the presence of ammonia and different amino acids. Using these techniques led to synthesis of a relatively wide range of pyrazines with sweet odor and chocolate-like smell. The optimum synthetic conditions to have maximum pyrazine yield for both the microwave and Parr reactions were 41 g of fructose/glucose syrup derived from cellulosic biomass, 28 mL NH4OH (30%, and 0.96 g L-threonine, 0.56 g L-valine, 0.5 g L-leucine, and 0.5 g L-isoleucine at 120 °C for 30 min. Quantitative results obtained via gas chromatography-mass spectrometry (GC-MS using the traditional open-heated oil bath method have been compared with data obtained via microwave and Parr reactors. In these two latter methods, sealed vessels under high pressure and higher temperature were used. The yield of synthesized pyrazines increased dramatically with both microwave and Parr reactors. Surprisingly, the yield of synthesized pyrazines was both reproducible and nearly two times higher via the Parr reactor than that observed with the microwave reactor under comparable conditions.

  16. Analysis of changes in egg quality of broiler breeders during the first reproduction period

    National Research Council Canada - National Science Library

    Helena Kontecka; Sebastian Nowaczewski; Marta M. Sierszuła

    2012-01-01

    .... The aim of the study was to analyse the physical characteristics, morphological composition and quality of individual components of the eggs of Cobb 500 broiler breeders during the first year of reproduction...

  17. Helium-cooled molten-salt fusion breeder

    Energy Technology Data Exchange (ETDEWEB)

    Moir, R.W.; Lee, J.D.; Fulton, F.J.; Huegel, F.; Neef, W.S. Jr.; Sherwood, A.E.; Berwald, D.H.; Whitley, R.H.; Wong, C.P.C.; Devan, J.H.

    1984-12-01

    We present a new conceptual design for a fusion reactor blanket that is intended to produce fissile material for fission power plants. Fast fission is suppressed by using beryllium instead of uranium to multiply neutrons. Thermal fission is suppressed by minimizing the fissile inventory. The molten-salt breeding medium (LiF + BeF/sub 2/ + ThF/sub 4/) is circulated through the blanket and to the on-line processing system where /sup 233/U and tritium are continuously removed. Helium cools the blanket and the austenitic steel tubes that contain the molten salt. Austenitic steel was chosen because of its ease of fabrication, adequate radiation-damage lifetime, and low corrosion by molten salt. We estimate that a breeder having 3000 MW of fusion power will produce 6500 kg of /sup 233/U per year. This amount is enough to provide makeup for 20 GWe of light-water reactors per year or twice that many high-temperature gas-cooled reactors or Canadian heavy-water reactors. Safety is enhanced because the afterheat is low and blanket materials do not react with air or water. The fusion breeder based on a pre-MARS tandem mirror is estimated to cost $4.9B or 2.35 times a light-water reactor of the same power. The estimated cost of the /sup 233/U produced is $40/g for fusion plants costing 2.35 times that of a light-water reactor if utility owned or $16/g if government owned.

  18. The nuclear data, A key component for reactor studies, Overview of AREVA NP needs and applications

    OpenAIRE

    Ravaux Simon; Demy Pierre-Marie; Rechatin Clément

    2016-01-01

    The quality of the nuclear data is essential for AREVA NP. Indeed, many AREVA NP activities such as reactor design, safety studies or reactor instrumentation use them as input data. So, the nuclear data can be considered as a key element for AREVA NP. REVA NP’s contribution in the improvement of the nuclear data consists in a joint effort with the CEA. It means a financing and a sharing of information which can give an orientation to the future research axis. The aim of this article is to pre...

  19. Analysis of removal alternatives for the Heavy Water Components Test Reactor at the Savannah River Site. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Owen, M.B.

    1997-04-01

    This engineering study evaluates different alternatives for decontamination and decommissioning of the Heavy Water Components Test Reactor (HWCTR). Cooled and moderated with pressurized heavy water, this uranium-fueled nuclear reactor was designed to test fuel assemblies for heavy water power reactors. It was operated for this purpose from march of 1962 until December of 1964. Four alternatives studied in detail include: (1) dismantlement, in which all radioactive and hazardous contaminants would be removed, the containment dome dismantled and the property restored to a condition similar to its original preconstruction state; (2) partial dismantlement and interim safe storage, where radioactive equipment except for the reactor vessel and steam generators would be removed, along with hazardous materials, and the building sealed with remote monitoring equipment in place to permit limited inspections at five-year intervals; (3) conversion for beneficial reuse, in which most radioactive equipment and hazardous materials would be removed and the containment building converted to another use such as a storage facility for radioactive materials, and (4) entombment, which involves removing hazardous materials, filling the below-ground structure with concrete, removing the containment dome and pouring a concrete cap on the tomb. Also considered was safe storage, but this approach, which has, in effect, been followed for the past 30 years, did not warrant detailed evaluation. The four other alternatives were evaluate, taking into account factors such as potential effects on the environment, risks, effectiveness, ease of implementation and cost. The preferred alternative was determined to be dismantlement. This approach is recommended because it ranks highest in the comparative analysis, would serve as the best prototype for the site reactor decommissioning program and would be most compatible with site property reuse plans for the future.

  20. High pressure water abrasive suspension JET cutting - An innovative cutting technology for the dismantling of reactor core components

    Energy Technology Data Exchange (ETDEWEB)

    Kalwa, H. [VAK, Kahl (Germany); Schwarz, T. [RWE NUKEM Limited, B7 Windscale, Seascale, Cumbria CA20 1PF (United Kingdom)

    2003-07-01

    In the frame of decommissioning of nuclear facilities the dismantling of reactor pressure vessels and their internals represent one special challenge. Due to their high activation, associated high dose rate levels, and to some extent the complex geometry and high material thickness of the components, there are particular demands for dismantling techniques. The task is to safely and economically work in every respect and therefore employ techniques with a wide area of application. As a proven technique, RWE NUKEM offers High Pressure Water Abrasive Suspension Jet Cutting. High pressure Water Abrasive Suspension Jet cutting (WASJ), well established in non-nuclear applications, has now been upgraded to meet the demands of decommissioning in the nuclear industry. The application at the Nuclear Power Plant in Kahl (VAK) was one of the first industrial scale applications. Based on several tests and parametric studies, High Water Abrasive Suspension Jet Cutting was tested against other cutting technologies. Because the overall performance in terms of fast and easy cutting operations, ability for remote handling, production of secondary waste WASJ was chosen at VAK Kahl for the dismantling of the lower core shroud and the reactor pressure vessel itself. The dismantling of the core shroud and the reactor vessel took place in-situ (component in its built-in position) using the WASJ technology. As example of application the core shroud of VAK is given. The total mass of the VAK lower shroud was about 3 tons and the wall thickness varied from 30 to 135 mm. The shroud was cut into segments in its in-vessel position, each segment being 500 x 900 mm and having a mass of about 0.25 tons. Cutting was performed in such a way that the separated pieces could be loaded directly into standard waste containers. All secondary waste (abrasives and dross) was collected in two 200 liter drums and, after drying, the drums were sent directly to waste storage. Reactor Pressure Vessel of VAK

  1. Production behavior of irradiation defects in solid breeder materials

    Energy Technology Data Exchange (ETDEWEB)

    Moriyama, Hirotake; Moritani, Kimikazu [Kyoto Univ. (Japan)

    1998-03-01

    The irradiation effects in solid breeder materials are important for the performance assessment of fusion reactor blanket systems. For a clearer understanding of such effects, we have studied the production behavior of irradiation defects in some lithium ceramics by an in-situ luminescence measurement technique under ion beam irradiation. The luminescence spectra were measured at different temperatures, and the temperature-transient behaviors of luminescence intensity were also measured. The production mechanisms of irradiation defects were discussed on the basis of the observations. (author)

  2. The nuclear data, A key component for reactor studies, Overview of AREVA NP needs and applications

    Directory of Open Access Journals (Sweden)

    Ravaux Simon

    2016-01-01

    Full Text Available The quality of the nuclear data is essential for AREVA NP. Indeed, many AREVA NP activities such as reactor design, safety studies or reactor instrumentation use them as input data. So, the nuclear data can be considered as a key element for AREVA NP. REVA NP’s contribution in the improvement of the nuclear data consists in a joint effort with the CEA. It means a financing and a sharing of information which can give an orientation to the future research axis. The aim of this article is to present the industrial point of view from AREVA NP on the research on nuclear data. Several examples of collaborations with the CEA which have resulted in an improvement of the nuclear data are presented.

  3. The nuclear data, A key component for reactor studies, Overview of AREVA NP needs and applications

    Science.gov (United States)

    Ravaux, Simon; Demy, Pierre-Marie; Rechatin, Clément

    2016-03-01

    The quality of the nuclear data is essential for AREVA NP. Indeed, many AREVA NP activities such as reactor design, safety studies or reactor instrumentation use them as input data. So, the nuclear data can be considered as a key element for AREVA NP. REVA NP's contribution in the improvement of the nuclear data consists in a joint effort with the CEA. It means a financing and a sharing of information which can give an orientation to the future research axis. The aim of this article is to present the industrial point of view from AREVA NP on the research on nuclear data. Several examples of collaborations with the CEA which have resulted in an improvement of the nuclear data are presented.

  4. Flow Components in a NaK Test Loop Designed to Simulate Conditions in a Nuclear Surface Power Reactor

    Science.gov (United States)

    Polzin, Kurt A.; Godfroy, Thomas J.

    2008-01-01

    A test loop using NaK as the working fluid is presently in use to study material compatibility effects on various components that comprise a possible nuclear reactor design for use on the lunar surface. A DC electromagnetic (EM) pump has been designed and implemented as a means of actively controlling the NaK flow rate through the system and an EM flow sensor is employed to monitor the developed flow rate. These components allow for the matching of the flow rate conditions in test loops with those that would be found in a full-scale surface-power reactor. The design and operating characteristics of the EM pump and flow sensor are presented. In the EM pump, current is applied to a set of electrodes to produce a Lorentz body force in the fluid. A measurement of the induced voltage (back-EMF) in the flow sensor provides the means of monitoring flow rate. Both components are compact, employing high magnetic field strength neodymium magnets thermally coupled to a water-cooled housing. A vacuum gap limits the heat transferred from the high temperature NaK tube to the magnets and a magnetically-permeable material completes the magnetic circuit. The pump is designed to produce a pressure rise of 5 psi, and the flow sensor's predicted output is roughly 20 mV at the loop's nominal flow rate of 0.5 GPM.

  5. Proceedings of the NEACRP/IAEA Specialists meeting on the international comparison calculation of a large sodium-cooled fast breeder reactor at Argonne National Laboratory on February 7-9, 1978

    Energy Technology Data Exchange (ETDEWEB)

    LeSage, L.G.; McKnight, R.D.; Wade, D.C.; Freese, K.E.; Collins, P.J.

    1980-08-01

    The results of an international comparison calculation of a large (1250 MWe) LMFBR benchmark model are presented and discussed. Eight reactor configurations were calculated. Parameters included with the comparison were: eigenvalue, k/sub infinity/, neutron balance data, breeding reaction rate ratios, reactivity worths, central control rod worth, regional sodium void reactivity, core Doppler and effective delayed neutron fraction. Ten countries participated in the comparison, and sixteen solutions were contributed. The discussion focuses on the variation in parameter values, the degree of consistency among the various parameters and solutions, and the identification of unexpected results. The results are displayed and discussed both by individual participants and by groupings of participants (e.g., results from adjusted data sets versus non-adjusted data sets).

  6. Development of a Versatile Ultrasonic Internal Pipe/Vessel Component Monitor for In-Service Inspection of Nuclear Reactor Components

    Energy Technology Data Exchange (ETDEWEB)

    Searfass, Clifford T. [Structural Integrity Associates, Inc., State College, PA (United States); Malinowski, Owen M. [Structural Integrity Associates, Inc., State College, PA (United States); Van Velsor, Jason K. [Structural Integrity Associates, Inc., State College, PA (United States)

    2015-03-22

    The stated goal of this work was to develop a versatile system which could accurately measure vessel and valve internal vibrations and cavitation formation under in-service conditions in nuclear power plants, ultrasonically. The developed technology will benefit the nuclear power generation industry by allowing plant operators to monitor valve and vessel internals during operation. This will help reduce planned outages and plant component failures. During the course of this work, Structural Integrity Associates, Inc. gathered information from industry experts that target vibration amplitudes to be detected should be in the range of 0.001-in to 0.005-in (0.025-mm to 0.127-mm) and target vibration frequency ranges which should be detected were found to be between 0-Hz and 300-Hz. During the performed work, an ultrasonic measuring system was developed which utilized ultrasonic pulse-echo time-of-flight measurements to measure vibration frequency and amplitude. The developed system has been shown to be able to measure vibration amplitudes as low as 0.0008-in (0.020-mm) with vibration frequencies in the range of 17-Hz to 1000-Hz. Therefore, the developed system was able to meet the industry needs for vibration measurement. The developed ultrasonic system was also to be able to measure cavitation formation by monitoring the received ultrasonic time- and frequency-domain signals. This work also demonstrated the survivability of commercially available probes at temperatures up to 300-F for several weeks.

  7. On monitoring the tritium breeder in a lead-lithium cooled ceramic breeder (LLCB) module of the ITER

    Energy Technology Data Exchange (ETDEWEB)

    Kapyshev, V., E-mail: kapyshev@nikiet.ru [Federal State Unitary Enterprise ' Dollezhal Research and Development Institute of Power Engineering' , PO Box 788, Moscow 101000 (Russian Federation); Kartashev, I.; Kovalenko, V.; Leshukov, A.; Poliksha, V.; Rasmerov, A.; Strebkov, Yu.; Yukhnov, N.; Vladimirova, N. [Federal State Unitary Enterprise ' Dollezhal Research and Development Institute of Power Engineering' , PO Box 788, Moscow 101000 (Russian Federation)

    2012-08-15

    The operation of a tritium breeder is a most process among engineering problems of DEMO. In this study, a design for monitoring tritium-breeding in the reactor is discussed. Additionally, a system for the experimental estimation of the tritium-breeding ratio (TBR) and the tritium-breeding dynamics in a lead-lithium cooled ceramic breeder (LLCB) test module used in the ITER is proposed. The systems are based on tritium and neutron-flux measurements under the ITER plasma D-T experiments and the use of lithium ortho-silicate and lithium carbonate samples and neutron detectors. Different lithum-6 and lithium-7 isotope contents in the samples are used to measure neutron spectrum. The samples and detectors are delivered in containers to the test breeder module (TBM) on a monitor channel connecting the TBM to an operating zone of the ITER. The tritium content in the samples is measured in a laboratory by the liquid scintillation method. Pneumatic control is used to deliver the samples to the TBM and to extract the samples using the channel during plasma-operational pauses. Neutron calculation is performed to estimate the tritium content in the samples and the heat distribution in the materials of the channel under reactor irradiation. A measurement accuracy of the tritium content in the carbonate and orthosilicate samples can attain a level of 7% and 10%, respectively. The results of the channel-cooling calculation performed under the nominal operating conditions of the TBM (a plasma pulse) are presented in the paper.

  8. Updated neutronics analyses of a water cooled ceramic breeder blanket for the CFETR

    Science.gov (United States)

    Xiaokang, ZHANG; Songlin, LIU; Xia, LI; Qingjun, ZHU; Jia, LI

    2017-11-01

    The water cooled ceramic breeder (WCCB) blanket employing pressurized water as a coolant is one of the breeding blanket candidates for the China Fusion Engineering Test Reactor (CFETR). Some updating of neutronics analyses was needed, because there were changes in the neutronics performance of the blanket as several significant modifications and improvements have been adopted for the WCCB blanket, including the optimization of radial build-up and customized structure for each blanket module. A 22.5 degree toroidal symmetrical torus sector 3D neutronics model containing the updated design of the WCCB blanket modules was developed for the neutronics analyses. The tritium breeding capability, nuclear heating power, radiation damage, and decay heat were calculated by the MCNP and FISPACT code. The results show that the packing factor and 6Li enrichment of the breeder should both be no less than 0.8 to ensure tritium self-sufficiency. The nuclear heating power of the blanket under 200 MW fusion power reaches 201.23 MW. The displacement per atom per full power year (FPY) of the plasma-facing component and first wall reach 0.90 and 2.60, respectively. The peak H production rate reaches 150.79 appm/FPY and the peak He production reaches 29.09 appm/FPY in blanket module #3. The total decay heat of the blanket modules is 2.64 MW at 1 s after shutdown and the average decay heat density can reach 11.09 kW m-3 at that time. The decay heat density of the blanket modules slowly decreases to lower than 10 W m-3 in more than ten years.

  9. Micronutrient component changes in the biogas slurry treated by a pilot solar-heated anaerobic reactor

    Science.gov (United States)

    Yang, Z. Y.; Xu, Y. B.; Li, P. F.; Wang, Y. J.; Sun, J.; Zhang, Y. P.

    2017-06-01

    A solar-heated anaerobic reactor system was applied to decompose livestock wastewater, in which cattle manure and chopped straw were mixed (CODCr 15,000∼25,000 mg·l-1), the commercial microorganisms were added to ambient acidification (about 32°C) and the acclimated sludge was inoculated. Then, the experiments were carried out on wastewater anaerobic degradation and biogas production at 40∼42°C, as fed every 10 days till stable running. The results showed that NH3-N and PO4 3- of the biogas slurry were 441 mg·l-1 and 65.0 mg·l-1 on the 35th day, respectively. The concentration of K was up to 350 mg·l-1 in the biogas slurry, rather higher than that of Mg and Fe, which indicated that the available K could contribute more in the agricultural irrigation. Total amino acids were up to 23.7 mg·l-1 after anaerobic digestion, in which Lys, Thr, Ala and Arg were prominent in the biogas slurry. These amino acids could be beneficial to seed soaking, feed adding and apply as foliar fertilizer. The major volatile organic compounds were detected in the biogas slurry, including toluene, m-cresol (up to 0.036% in the process of ambient acidification) and triethylsilane, which could be reduced to scarcely influence on agricultural application after anaerobic digestion.

  10. Continuous electrochemical treatment of simulated industrial textile wastewater from industrial components in a tubular reactor

    Energy Technology Data Exchange (ETDEWEB)

    Koerbahti, Bahadir K., E-mail: korbahti@mersin.edu.tr [Faculty of Engineering, Department of Chemical Engineering, University of Mersin, Ciftlikkoey, 33343 Mersin (Turkey); Tanyolac, Abdurrahman, E-mail: tanyolac@hacettepe.edu.tr [Faculty of Engineering, Department of Chemical Engineering, Hacettepe University, Beytepe, 06800 Ankara (Turkey)

    2009-10-30

    The continuous electrochemical treatment of industrial textile wastewater in a tubular reactor was investigated. The synthetic wastewater was based on the real process information of pretreatment and dyeing stages of the industrial mercerized and non-mercerized cotton and viscon production. The effects of residence time on chemical oxygen demand (COD), color and turbidity removals and pH change were studied under response surface optimized conditions of 30 deg. C, 25 g/L electrolyte concentration and 3505 mg/L COD feed concentration with 123.97 mA/cm{sup 2} current density. Increasing residence time resulted in steady profiles of COD and color removals with higher treatment performances. The best column performance was realized at 3 h of residence time as 53.5% and 99.3% for COD and color removals, respectively, at the expense of 193.1 kWh/kg COD with a mass transfer coefficient of 9.47 x 10{sup -6} m/s.

  11. Insights for aging management of light water reactor components: Metal containments. Volume 5

    Energy Technology Data Exchange (ETDEWEB)

    Shah, V.N.; Sinha, U.P. [EG and G Idaho, Inc., Idaho Falls, ID (United States); Smith, S.K. [Ogden Environmental and Energy Services, Southfield, MI (United States)

    1994-03-01

    This report evaluates the available technical information and field experience related to management of aging damage to light water reactor metal containments. A generic aging management approach is suggested for the effective and comprehensive aging management of metal containments to ensure their safe operation. The major concern is corrosion of the embedded portion of the containment vessel and detection of this damage. The electromagnetic acoustic transducer and half-cell potential measurement are potential techniques to detect corrosion damage in the embedded portion of the containment vessel. Other corrosion-related concerns include inspection of corrosion damage on the inaccessible side of BWR Mark I and Mark II containment vessels and corrosion of the BWR Mark I torus and emergency core cooling system piping that penetrates the torus, and transgranular stress corrosion cracking of the penetration bellows. Fatigue-related concerns include reduction in the fatigue life (a) of a vessel caused by roughness of the corroded vessel surface and (b) of bellows because of any physical damage. Maintenance of surface coatings and sealant at the metal-concrete interface is the best protection against corrosion of the vessel.

  12. Comparison of early socialization practices used for litters of small-scale registered dog breeders and nonregistered dog breeders.

    Science.gov (United States)

    Korbelik, Juraj; Rand, Jacquie S; Morton, John M

    2011-10-15

    OBJECTIVE-To compare early socialization practices between litters of breeders registered with the Canine Control Council (CCC) and litters of nonregistered breeders advertising puppies for sale in a local newspaper. DESIGN-Retrospective cohort study. Animals-80 litters of purebred and mixed-breed dogs from registered (n = 40) and non-registered (40) breeders. PROCEDURES-Registered breeders were randomly selected from the CCC website, and nonregistered breeders were randomly selected from a weekly advertising newspaper. The litter sold most recently by each breeder was then enrolled in the study. Information pertaining to socialization practices for each litter was obtained through a questionnaire administered over the telephone. RESULTS-Registered breeders generally had more breeding bitches and had more litters than did nonregistered breeders. Litters of registered breeders were more likely to have been socialized with adult dogs, people of different appearances, and various environmental stimuli, compared with litters of nonregistered breeders. Litters from registered breeders were also much less likely to have been the result of an unplanned pregnancy. CONCLUSIONS AND CLINICAL RELEVANCE-Among those breeders represented, litters of registered breeders received more socialization experience, compared with litters of nonregistered breeders. People purchasing puppies from nonregistered breeders should focus on socializing their puppies between the time of purchase and 14 weeks of age. Additional research is required to determine whether puppies from nonregistered breeders are at increased risk of behavioral problems and are therefore more likely to be relinquished to animal shelters or euthanized, relative to puppies from registered breeders.

  13. Practitioners'--breeders' approach to canine parturition.

    Science.gov (United States)

    Freak, M J

    1975-04-05

    Both veterinary surgeon and dog breeder should be involved in assessing the whelping capability of brood bitches as one essential point in the selection of sound stock. Normal parturition is described in a manner that might be used in the instruction of breeders and nursing auxiliaries in midwifery. In its classical three stages, the mechanics and hydraulics are explained in simple terms and the hormonal changes discussed in relation to each stage. The type of co-operation desired between veterinary surgeon and breeder is discussed and the instruction to be given on the recognition of dystocia is outlined. Some commonly met dystocias are described. Simple digitally-assisted delivery by the midwife/breeder is described as are the forceps techniques which may be applied by the veterinary surgeon in the course of diagnosis and delivery.

  14. Major welfare issues in broiler breeders

    NARCIS (Netherlands)

    Jong, de I.C.; Guemene, D.

    2011-01-01

    Under current practices, broiler parent stock (broiler breeders) encounter several welfare problems, such as feed restriction and injury during mating. Intensive selection for production traits, especially growth rate, is associated with increased nutritious requirement and thus feed consumption,

  15. Balance of Plant System Analysis and Component Design of Turbo-Machinery for High Temperature Gas Reactor Systems

    Energy Technology Data Exchange (ETDEWEB)

    Ballinger, Ronald G. [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Wang, Chun Yun [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Kadak, Andrew [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Todreas, Neil [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Mirick, Bradley [Concepts, Northern Engineering and Research, Woburn, MA (United States); Demetri, Eli [Concepts, Northern Engineering and Research, Woburn, MA (United States); Koronowski, Martin [Concepts, Northern Engineering and Research, Woburn, MA (United States)

    2004-08-30

    The Modular Pebble Bed Reactor system (MPBR) requires a gas turbine cycle (Brayton cycle) as the power conversion system for it to achieve economic competitiveness as a Generation IV nuclear system. The availability of controllable helium turbomachinery and compact heat exchangers are thus the critical enabling technology for the gas turbine cycle. The development of an initial reference design for an indirect helium cycle has been accomplished with the overriding constraint that this design could be built with existing technology and complies with all current codes and standards. Using the initial reference design, limiting features were identified. Finally, an optimized reference design was developed by identifying key advances in the technology that could reasonably be expected to be achieved with limited R&D. This final reference design is an indirect, intercooled and recuperated cycle consisting of a three-shaft arrangement for the turbomachinery system. A critical part of the design process involved the interaction between individual component design and overall plant performance. The helium cycle overall efficiency is significantly influenced by performance of individual components. Changes in the design of one component, a turbine for example, often required changes in other components. To allow for the optimization of the overall design with these interdependencies, a detailed steady state and transient control model was developed. The use of the steady state and transient models as a part of an iterative design process represents a key contribution of this work. A dynamic model, MPBRSim, has been developed. The model integrates the reactor core and the power conversion system simultaneously. Physical parameters such as the heat exchangers; weights and practical performance maps such as the turbine characteristics and compressor characteristics are incorporated into the model. The individual component models as well as the fully integrated model of the

  16. Crack growth behaviour of low alloy steels for pressure boundary components under transient light water reactor operating conditions (CASTOC)

    Energy Technology Data Exchange (ETDEWEB)

    Foehl, J.; Weissenberg, T. [Materialpruefungsanstalt, Univ. Stuttgart (Germany); Gomez-Briceno, D.; Lapena, J. [Centro de Investigaciones Energeticas, Medioambientales y Tecnologicas (CIEMAT) (Spain); Ernestova, M.; Zamboch, M. [Nuclear Research Inst. (NRI) (Czech Republic); Seifert, H.P.; Ritter, S. [Paul Scherrer Inst. (PSI) (Switzerland); Roth, A.; Devrient, B. [Framatome ANP GmbH (F ANP) (Germany); Ehrnsten, U. [Technical Research Centre of Finland (VTT) (Finland)

    2004-07-01

    The CASTOC project addresses environmentally assisted cracking (EAC) phenomena in low alloy steels used for pressure boundary components in both Western type boiling water reactors (BWR) and Russian type pressurised water reactors (VVER). It comprises the four work packages (WP): inter-laboratory comparison test (WP1); EAC behaviour under static load (WP2), EAC behaviour under cyclic load and load transients (WP3); evaluation of the results with regard to their relevance for components in practice (WP4). The use of sophisticated test facilities and measurement techniques for the on-line detection of crack advances have provided a more detailed understanding of the mechanisms of environmentally assisted cracking and provided quantitative data of crack growth rates as a function of loading events and time, respectively. The effect of several major parameters controlling EAC was investigated with particular emphasis on the transferability of the results to components in service. The obtained crack growth rate data were reflected on literature data and on commonly applied prediction curves as presented in the appropriate Code. At relevant stress intensity factors it could be shown that immediate cessation of growing cracks occurs after changing from cyclic to static load in high purity oxygenated BWR water and oxygen-free VVER water corresponding to steady state operation conditions. Susceptibility to environmentally assisted cracking under static load was observed for a heat affected zone material in oxygenated high purity water and also in base materials during a chloride transient representing BWR water condition below Action Level 1 of the EPRI Water Chemistry Guidelines according to the lectrical conductivity of the water but in the range of Action Level 2 according to the content of chlorides. Time based crack growth was also observed in one Russian type base material in oxygenated VVER water and in one Western type base material in oxygenated high purity BWR

  17. RECENT IMPROVEMENTS IN THE CUPID CODE FOR A MULTI-DIMENSIONAL TWO-PHASE FLOW ANALYSIS OF NUCLEAR REACTOR COMPONENTS

    Directory of Open Access Journals (Sweden)

    HAN YOUNG YOON

    2014-10-01

    Full Text Available The CUPID code has been developed at KAERI for a transient, three-dimensional analysis of a two-phase flow in light water nuclear reactor components. It can provide both a component-scale and a CFD-scale simulation by using a porous media or an open media model for a two-phase flow. In this paper, recent advances in the CUPID code are presented in three sections. First, the domain decomposition parallel method implemented in the CUPID code is described with the parallel efficiency test for multiple processors. Then, the coupling of CUPID-MARS via heat structure is introduced, where CUPID has been coupled with a system-scale thermal-hydraulics code, MARS, through the heat structure. The coupled code has been applied to a multi-scale thermal-hydraulic analysis of a pool mixing test. Finally, CUPID-SG is developed for analyzing two-phase flows in PWR steam generators. Physical models and validation results of CUPID-SG are discussed.

  18. Design of a helium-cooled molten salt fusion breeder

    Energy Technology Data Exchange (ETDEWEB)

    Moir, R.W.; Lee, J.D.; Fulton, F.J.; Huegel, F.; Neef, W.S. Jr.; Sherwood, A.E.; Berwald, D.H.; Whitley, R.H.; Wong, C.P.C.; DeVan, J.H.

    1985-02-01

    A new conceptual blanket design for a fusion reactor produces fissile material for fission power plants. Fission is suppressed by using beryllium, rather than uranium, to multiply neutrons and also by minimizing the fissile inventory. The molten-salt breeding media (LiF + BeF/sub 2/ + TghF/sub 4/) is circulated through the blanket and on to the online processing system where /sup 233/U and tritium are continuously removed. Helium cools the blanket including the steel pipes containing the molten salt. Austenitic steel was chosen because of its ease of fabrication, adequate radiation-damage lifetime, and low corrosion rate by molten salt. We estimate the breeder, having 3000 MW of fusion power, produces 6400 kg of /sup 233/U per year, which is enough to provide make up for 20 GWe of LWR per year (or 14 LWR plants of 4440 MWt) or twice that many HTGRs or CANDUs. Safety is enhanced because the afterheat is low and the blanket materials do not react with air or water. The fusion breeder based on a pre-MARS tandem mirror is estimated to cost $4.9B or 2.35 times an LWR of the same power. The estimated present value cost of the /sup 2/anumber/sup 3/U produced is $40/g if utility financed or $16/g if government financed.

  19. Uranium resources and their implications for fission breeder and fusion hybrid development

    Energy Technology Data Exchange (ETDEWEB)

    Max, C.E.

    1984-05-15

    Present estimates of uranium resources and reserves in the US and the non-Communist world are reviewed. The resulting implications are considered for two proposed breeder technologies: the liquid metal fast breeder reactor (LMFBR) and the fusion hybrid reactor. Using both simple arguments and detailed scenarios from the published literature, conditions are explored under which the LMFBR and fusion hybrid could respectively have the most impact, considering both fuel-supply and economic factors. The conclusions emphasize strong potential advantages of the fusion hybrid, due to its inherently large breeding rate. A discussion is presented of proposed US development strategies for the fusion hybrid, which at present is far behind the LMFBR in its practical application and maturity.

  20. Plutonium Worlds. Fast Breeders, Systems Analysis and Computer Simulation in the Age of Hypotheticality

    OpenAIRE

    Sebastian Vehlken

    2014-01-01

    This article examines the media history of one of the hallmark civil nuclear energy programs in Western Germany – the development of Liquid Metal Fast Breeder Reactor (LMFBR) technology. Promoted as a kind of perpetuum mobile of the Atomic Age, the "German Manhattan Project" not only imported big science thinking. In its context, nuclear technology was also put forth as an avantgarde of scientific inquiry, dealing with the most complex and critical technological endeavors. In the face of the ...

  1. Development of self-cooled liquid metal breeder blankets

    Energy Technology Data Exchange (ETDEWEB)

    Malang, S.; Tillack, M.S. [comps.; Barleon, L.; Baumgaertner, S.; Borgstedt, H.U.; Buehler, L.; Buerkle, G.; Dammel, F.; Feuerstein, H.; Fischer, U.; Gabel, K.; Gerhardt, H.; Glasbrenner, H.; Heider, T.; Jordan, T.; Kleefeldt, K.; Kleykamp, H.; Lindau, R.; Moeslang, A.; Norajitra, F.; Reimann, G.; Reimann, J.; Riesch-Oppermann, H.; Ritzhaupt-Kleissl, H.J.; Schleisiek, K.; Schmitz, G.; Schnauder, H.; Stieglitz, R.; Tellini, B.; Tsige-Tamirat, H.

    1995-11-01

    The development of liquid metal breeder blankets for fusion reactors has been performed in the Forschungszentrum Karlsruhe as a part of the European fusion blanket development program with the aim to select the two most promising concepts in 1995 for further development. In this report are described the designs of self-cooled blankets together with the results of the accompanying R and D program of the years 1992-1995. The program includes design studies as well as theoretical and experimental work in the fields of neutronics, magneto-hydrodynamics, thermohydraulics, mechanical stresses, compatibility and purification of lead-lithium, tritium extraction and control, safety, reliability, electrical insulating coatings, and fabrication technologies for blanket segments. (orig.) 250 refs.

  2. Development of and verification test integral reactor major components - Development of manufacturing process and fabrication of prototype for SG and CEDM

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Chang Hee; Park, Hwa Kyu; Kim, Yong Kyu; Choi, Yong Soon; Kang, Ki Su; Hyun, Young Min [Korea Heavy Industries and Construction Co., LTD., Changwon (Korea)

    1999-03-01

    Integral SMART(System integrated Modular Advanced Reactor) type reactor is under conceptual design. Because major components is integrated within in a single pressure vessel, compact design using advanced technology is essential. It means that manufacturing process for these components is more complex and difficult. The objective of this study is to confirm the possibility of manufacture of Steam Generator, Control Element Drive Mechanism(CEDM) and Reactor Assembly which includes Reactor Pressure Vessel, it is important to understand the design requirement and function of the major components. After understanding the design requirement and function, it is concluded that the helical bending and weld qualification of titanium tube for Steam Generator and the applicability of electron beam weld for CEDM step motor parts is the critical to fabricate the components. Therefore, bending mock-up and weld qualification of titanium tube was performed and the results are quite satisfactory. Also, it is concluded that electron beam welding technique can be applicable to the CEDM step motor part. (author). 22 refs., 14 figs., 46 tabs.

  3. Development of fuels and structural materials for fast breeder reactors

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    detrimental especially from welding considerations, and globular oxides are least harmful. For grades 304L(N) and 316L(N) SS, the grain size number is specified as larger than ASTM. No. 2 (i.e., a finer grain size), to achieve optimum high temperature mechanical properties and to permit meaningful ultrasonic examination.

  4. Conceptual design of Indian molten salt breeder reactor

    Indian Academy of Sciences (India)

    cooled options. Another option, which ... the quantity of waste. It is thus an optimum solution for meeting the energy needs of a large country like India in a sustainable manner, securing its energy freedom in the long term. Schematic of Indian ...

  5. The component content of active particles in a plasma-chemical reactor based on volume barrier discharge

    Energy Technology Data Exchange (ETDEWEB)

    Soloshenko, I A [Institute of Physics of National Academy of Sciences of Ukraine, 46 Nauki Avenue, 03028, Kiev (Ukraine); Tsiolko, V V [Institute of Physics of National Academy of Sciences of Ukraine, 46 Nauki Avenue, 03028, Kiev (Ukraine); Pogulay, S S [Institute of Physics of National Academy of Sciences of Ukraine, 46 Nauki Avenue, 03028, Kiev (Ukraine); Terent' yeva, A G [Institute of Physics of National Academy of Sciences of Ukraine, 46 Nauki Avenue, 03028, Kiev (Ukraine); Bazhenov, V Yu [Institute of Physics of National Academy of Sciences of Ukraine, 46 Nauki Avenue, 03028, Kiev (Ukraine); Shchedrin, A I [Institute of Physics of National Academy of Sciences of Ukraine, 46 Nauki Avenue, 03028, Kiev (Ukraine); Ryabtsev, A V [Institute of Physics of National Academy of Sciences of Ukraine, 46 Nauki Avenue, 03028, Kiev (Ukraine); Kuzmichev, A I [National Technical University ' KPI' , 37 Peremogy Avenue, KPI-2230, 03056, Kiev, (Ukraine)

    2007-02-01

    In this paper the results of theoretical and experimental studies of the component content of active particles formed in a plasma-chemical reactor composed of a multiple-cell generator of active particles, based on volume barrier discharge, and a working chamber are presented. For calculation of the content of uncharged plasma components an approach is proposed which is based on averaging of the power introduced over the entire volume. Advantages of such an approach lie in an absence of fitting parameters, such as the dimensions of microdischarges, their surface density and rate of breakdown. The calculation and the experiment were accomplished with the use of dry air (20% relative humidity) as the plasma generating medium. Concentrations of O{sub 3}, HNO{sub 3}, HNO{sub 2}, N{sub 2} O{sub 5} and NO{sub 3} were measured experimentally in the discharge volume and working chamber for the residence time of particles on a discharge of 0.3 s and more and discharge specific power of 1.5 W cm{sup -3}. It has been determined that the best agreement between the calculation and the experiment occurs at calculated gas medium temperatures in the discharge plasma of about 400-425 K, which correspond to the experimentally measured rotational temperature of nitrogen. In most cases the calculated concentrations of O{sub 3}, HNO{sub 3}, HNO{sub 2}, N{sub 2}O{sub 5} and NO{sub 3} for the barrier discharge and the working chamber are in fairly good agreement with the respective measured values.

  6. Argon generation in fusion reactor materials

    Energy Technology Data Exchange (ETDEWEB)

    Khripunov, Vladimir, E-mail: Khripunov_VI@NRCKI.ru

    2015-10-15

    Highlights: • A relatively long-lived Ar-39 (T{sub 1/2} = 269 yr) may appear in fusion reactor materials. • Ar-39 activities may become apparent after tritium removal. • Initial impurity control of K is definitely recommended. • A substantiation of the effective dose rates for exposure to inert argon is urgent. - Abstract: Different candidate plasma facing materials (as tungsten, beryllium), the low activation structure materials (as vanadium alloys, silicon carbides), liquid breeders (lithium and lithium-lead) and some others have been suggested for future fusion power reactor cores as corresponding to maintenance, recycling and for waste disposal acceptance after 50 and 100 years of cooling. It is shown by the neutron activation analysis that a relatively short-lived Ar-41 (T{sub 1/2} = 1.85 h), Ar-37 (T{sub 1/2} = 35 days) and rather long lived Ar-39 (T{sub 1/2} = 269 yr) may appear in these materials under the fusion neutron irradiation conditions. While argon production is essentially less than helium production in irradiated materials, at other times its impact, e.g., in the inhalation dose, becomes significant. In some cases the Ar-39 activity is comparable or even exceeds the C-14 activity and may become apparent after tritium removal from plasma exhaust and dust, from the liquid breeders, during plasma-facing and structural component recycling and waste management. The main source terms of argon-39 activity for these materials are identified and the specific production rates are evaluated relative to radiation conditions of a power or DEMO fusion reactor and to electric power production.

  7. Thermal control of solid breeder blankets

    Energy Technology Data Exchange (ETDEWEB)

    Raffray, A.R.; Ying, A.; Gorbis, Z.; Tillack, M.S.; Abdou, M.A.

    1991-12-31

    An assessment of the thermal control mechanisms applicable to solid breeder blanket designs under ITER-like operating conditions is presented in this paper. Four cases are considered: a helium gap; a sintered block Be region; a sintered block helium region with a metallic felt at the Be/clad interface; and a Be packed bed region. For these cases, typical operating are explored to determine the ranges of wall load which can be accommodated while maintaining the breeder within its allowable operating temperature window. The corresponding region thicknesses are calculated to help identify practicality and design tolerances.

  8. Thermal control of solid breeder blankets

    Energy Technology Data Exchange (ETDEWEB)

    Raffray, A.R.; Ying, A.; Gorbis, Z.; Tillack, M.S.; Abdou, M.A.

    1991-01-01

    An assessment of the thermal control mechanisms applicable to solid breeder blanket designs under ITER-like operating conditions is presented in this paper. Four cases are considered: a helium gap; a sintered block Be region; a sintered block helium region with a metallic felt at the Be/clad interface; and a Be packed bed region. For these cases, typical operating are explored to determine the ranges of wall load which can be accommodated while maintaining the breeder within its allowable operating temperature window. The corresponding region thicknesses are calculated to help identify practicality and design tolerances.

  9. Proposed and existing passive and inherent safety-related structures, systems, and components (building blocks) for advanced light-water reactors

    Energy Technology Data Exchange (ETDEWEB)

    Forsberg, C.W.; Moses, D.L.; Lewis, E.B.; Gibson, R.; Pearson, R.; Reich, W.J.; Murphy, G.A.; Staunton, R.H.; Kohn, W.E.

    1989-10-01

    A nuclear power plant is composed of many structures, systems, and components (SSCs). Examples include emergency core cooling systems, feedwater systems, and electrical systems. The design of a reactor consists of combining various SSCs (building blocks) into an integrated plant design. A new reactor design is the result of combining old SSCs in new ways or use of new SSCs. This report identifies, describes, and characterizes SSCs with passive and inherent features that can be used to assure safety in light-water reactors. Existing, proposed, and speculative technologies are described. The following approaches were used to identify the technologies: world technical literature searches, world patent searches, and discussions with universities, national laboratories and industrial vendors. 214 refs., 105 figs., 26 tabs.

  10. Finite element based stress analysis of graphite component in high temperature gas cooled reactor core using linear and nonlinear irradiation creep models

    Energy Technology Data Exchange (ETDEWEB)

    Mohanty, Subhasish, E-mail: smohanty@anl.gov; Majumdar, Saurindranath

    2015-10-15

    Highlights: • High temperature gas cooled reactor. • Finite element based stress analysis. • H-451 graphite. • Irradiation creep model. • Graphite reflector stress analysis. - Abstract: Irradiation creep plays a major role in the structural integrity of the graphite components in high temperature gas cooled reactors. Finite element procedures combined with a suitable irradiation creep model can be used to simulate the time-integrated structural integrity of complex shapes, such as the reactor core graphite reflector and fuel bricks. In the present work a comparative study was undertaken to understand the effect of linear and nonlinear irradiation creep on results of finite element based stress analysis. Numerical results were generated through finite element simulations of a typical graphite reflector.

  11. Simulation in equivalent beams of reactor vessel internal components 900 MW; Modelisation en poutres equivalentes des internes de cuve 900 MW

    Energy Technology Data Exchange (ETDEWEB)

    Metivier, V

    1995-12-31

    The nuclear safety imperatives of PWR type reactors require a good knowledge of the dynamic behaviour of the reactor vessel internal components in case of seism. Indeed, in case of seism, safety and reliability of reactor vessel internal components have to be proved because their size could induce their partial or total damage. It is then indispensable to dispose of a good dynamic simulation of the vessel internal components. In the first part of this work, a model of equivalent beams of the reactor vessel internal components has been carried out in air. In fact, each core structure is simulated by an equivalent beam. These equivalent beams are also subdivided into several beams, identified by their extremities. It is then possible to characterize the section changes and materials for one element, assigning at each of these beams proper characteristics, as its length, its density, its inertial moment...After a validation of this model by a modal calculus, a second step has consisted of taking into account the fluid-structure coupling. Indeed, the vessel internal components lies under a coolant fluid flow, called ``primary fluid``. The effect of this fluid is to add mass, absorption or stiffness to structures with which it is bound. The dynamic behaviour of the structures can then be highly influenced by this coupling. A fluid coupling has then been considered in this work. It is of inertial type because it is proportional to the structures acceleration. The results of the modal calculus has been compared to the experimental ones. Three softwares have been used in this study: GIBI, IDEAS and the Aster code. (O.M.) 11 refs.

  12. Technical Letter Report, An Evaluation of Ultrasonic Phased Array Testing for Reactor Piping System Components Containing Dissimilar Metal Welds, JCN N6398, Task 2A

    Energy Technology Data Exchange (ETDEWEB)

    Diaz, Aaron A.; Cinson, Anthony D.; Crawford, Susan L.; Anderson, Michael T.

    2009-11-30

    Research is being conducted for the U.S. Nuclear Regulatory Commission at the Pacific Northwest National Laboratory to assess the effectiveness and reliability of advanced nondestructive examination (NDE) methods for the inspection of light-water reactor components. The scope of this research encom¬passes primary system pressure boundary materials including dissimilar metal welds (DMWs), cast austenitic stainless steels (CASS), piping with corrosion-resistant cladding, weld overlays, inlays and onlays, and far-side examinations of austenitic piping welds. A primary objective of this work is to evaluate various NDE methods to assess their ability to detect, localize, and size cracks in steel components that challenge standard and/or conventional inspection methodologies. This interim technical letter report provides a summary of a technical evaluation aimed at assessing the capabilities of phased-array (PA) ultrasonic testing (UT) methods as applied to the inspection of small-bore DMW components that exist in the reactor coolant systems (RCS) of pressurized water reactors (PWRs). Operating experience and events such as the circumferential cracking in the reactor vessel nozzle-to-RCS hot leg pipe at V.C. Summer nuclear power station, identified in 2000, show that in PWRs where primary coolant water (or steam) are present under normal operation, Alloy 82/182 materials are susceptible to pressurized water stress corrosion cracking. The extent and number of occurrences of DMW cracking in nuclear power plants (domestically and internationally) indicate the necessity for reliable and effective inspection techniques. The work described herein was performed to provide insights for evaluating the utility of advanced NDE approaches for the inspection of DMW components such as a pressurizer surge nozzle DMW, a shutdown cooling pipe DMW, and a ferritic (low-alloy carbon steel)-to-CASS pipe DMW configuration.

  13. Online stress corrosion crack and fatigue usages factor monitoring and prognostics in light water reactor components: Probabilistic modeling, system identification and data fusion based big data analytics approach

    Energy Technology Data Exchange (ETDEWEB)

    Mohanty, Subhasish M. [Argonne National Lab. (ANL), Argonne, IL (United States); Jagielo, Bryan J. [Argonne National Lab. (ANL), Argonne, IL (United States); Oakland Univ., Rochester, MI (United States); Iverson, William I. [Argonne National Lab. (ANL), Argonne, IL (United States); Univ. of Illinois at Urbana-Champaign, Champaign, IL (United States); Bhan, Chi Bum [Argonne National Lab. (ANL), Argonne, IL (United States); Pusan National Univ., Busan (Korea, Republic of); Soppet, William S. [Argonne National Lab. (ANL), Argonne, IL (United States); Majumdar, Saurin M. [Argonne National Lab. (ANL), Argonne, IL (United States); Natesan, Ken N. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2014-12-10

    Nuclear reactors in the United States account for roughly 20% of the nation's total electric energy generation, and maintaining their safety in regards to key component structural integrity is critical not only for long term use of such plants but also for the safety of personnel and the public living around the plant. Early detection of damage signature such as of stress corrosion cracking, thermal-mechanical loading related material degradation in safety-critical components is a necessary requirement for long-term and safe operation of nuclear power plant systems.

  14. Component

    Directory of Open Access Journals (Sweden)

    Tibor Tot

    2011-01-01

    Full Text Available A unique case of metaplastic breast carcinoma with an epithelial component showing tumoral necrosis and neuroectodermal stromal component is described. The tumor grew rapidly and measured 9 cm at the time of diagnosis. No lymph node metastases were present. The disease progressed rapidly and the patient died two years after the diagnosis from a hemorrhage caused by brain metastases. The morphology and phenotype of the tumor are described in detail and the differential diagnostic options are discussed.

  15. Plutonium Worlds. Fast Breeders, Systems Analysis and Computer Simulation in the Age of Hypotheticality

    Directory of Open Access Journals (Sweden)

    Sebastian Vehlken

    2014-09-01

    Full Text Available This article examines the media history of one of the hallmark civil nuclear energy programs in Western Germany – the development of Liquid Metal Fast Breeder Reactor (LMFBR technology. Promoted as a kind of perpetuum mobile of the Atomic Age, the "German Manhattan Project" not only imported big science thinking. In its context, nuclear technology was also put forth as an avantgarde of scientific inquiry, dealing with the most complex and critical technological endeavors. In the face of the risks of nuclear technology, German physicist Wolf Häfele thus announced a novel epistemology of "hypotheticality". In a context where traditional experimental engineering strategies became inappropiate, he called for the application of advanced media technologies: Computer Simulations (CS and Systems Analysis (SA generated computerized spaces for the production of knowledge. In the course of the German Fast Breeder program, such methods had a twofold impact. One the one hand, Häfele emphazised – as the "father of the German Fast Breeder" – the utilization of CS for the actual planning and construction of the novel reactor type. On the other, namely as the director of the department of Energy Systems at the International Institute for Applied Systems Analysis (IIASA, Häfele advised SA-based projections of energy consumption. These computerized scenarios provided the rationale for the conception of Fast Breeder programs as viable and necessary alternative energy sources in the first place. By focusing on the role of the involved CS techniques, the paper thus investigates the intertwined systems thinking of nuclear facilities’s planning and construction and the design of large-scale energy consumption and production scenarios in the 1970s and 1980s, as well as their conceptual afterlives in our contemporary era of computer simulation.

  16. Studying the capture cross sections of constructional elements from measurements of the neutron balance in breeder media

    Energy Technology Data Exchange (ETDEWEB)

    Golubev, V.I.; Dulin, V.A.; Kazanskii, Yu.A.; Darrouzet, M.; Martin-Deidier, L.; Rimpault, G.

    1987-04-01

    Until recently, the indeterminacy in the group capture cross sections of constructional elements at neutron energies above 1 keV were estimated at 15-20%, leading to an error of 0.2 and 1%, respectively, in calculating K/sub ef/ and the conversion factor of breeder reactors with oxide fuel and sodium coolant. In fact, calculations using the BNAB-78 group constants used in the USSR for the design development of fast reactors show that the mean neutron capture cross section of constructional elements (iron, nickel, and chromium) is approx. 1.4 times greater for a typical breeder reactor than in the case of calculation by the version of Carnaval IV used in France for the Superphoenix reactors. To refine the proportion of neutrons absorbed in stainless steel, the neutron balance in media consisting of uranium fuel and stainless steel with nickel in a proportion ensuring a near-unity breeder coefficient of infinite media of this composition (K/sub infinity/ = 1) has been measured at the Power-Physics Institute in Obninsk and at the Center for Nuclear Research in Caradache. The results obtained allow the accuracy of calculating the proportion of neutrons absorbed in constructional elements to be judged

  17. FOWL CHOLERA IN A BREEDER FLOCK

    Directory of Open Access Journals (Sweden)

    Z. Parveen, A. A. Nasir, K.Tasneem and A. Shah

    2003-12-01

    Full Text Available During January, 2003 Pasteurella multocida the causative agent of fowl cholera was isolated from a breeder flock in Lahore District. The age of the flock was 245 days. Increased mortality, swollen wattles and lameness were the clinical findings present in almost all the affected birds, while gross lesions were typical of fowl cholera. To prove the virulence of the organism, mice and six-week old cockerals were infected and P. multocida was reisolated.

  18. Initial design and test of the tritium breeder monitoring system for the lead-lithium cooled ceramic breeder (LLCB) module of the ITER

    Energy Technology Data Exchange (ETDEWEB)

    Kapyshev, V., E-mail: kapyshev@nikiet.ru [Federal State Unitary Enterprise “Dollezhal Research and Development Institute of Power Engineering”, PO Box 788, Moscow 101000 (Russian Federation); Danilov, I.; Kartashev, I.; Kovalenko, V.; Leshukov, A.; Poliksha, V.; Razmerov, A.; Strebkov, Yu.; Sviridenko, M.; Trusova, E.; Vladimirova, N. [Federal State Unitary Enterprise “Dollezhal Research and Development Institute of Power Engineering”, PO Box 788, Moscow 101000 (Russian Federation); Kalashnikov, A. [Rosatom (Russian Federation)

    2013-10-15

    Highlights: • We propose a system for measurement of tritium-breeding dynamics in module of the ITER. • Lithium carbonate sensors and neutron detectors are used for the measurements. • The sensors and detectors are irradiated by neutrons under ITER plasma operations. • A pneumatic concept is suggested for conveying of the samples in the module. • The results of the tritium measurements in the sensors after irradiation are discussed. -- Abstract: The demonstration of a tritium breeder is an important part of an ITER mission. A concept for an experimental estimation of the tritium-breeding ratio (TBR) and the tritium-breeding dynamics in a test breeder module (TBM) of ITER has been developed. A system for the experimental estimation of the values is proposed for the lead–lithium cooled ceramic breeder (LLCB) TBM of ITER. The system is based on tritium breeder and neutron flux measurements under ITER plasma D-T experiments and the use of lithium carbonate sensors and neutron detectors. Three capsules with lithium carbonate (Li{sub 2}CO{sub 3}) containing different relative abundances of lithum-6 and lithium-7 (Li-6/Li-7 ratios of that found in nature: 1/1 and 9/1) and three capsules with neutron detectors are placed in a container. The low-level activities of the structural materials of the container and the capsules are used to prevent operation in a hot cell after the reactor irradiation of the container. For the delivery/withdrawal of the containers into/from the TBM, a pneumatic concept is suggested with a monitor channel connecting the TBM and an operating zone for conveying the containers in the TBM before the pulse and extracting them after the pulse. The initial design of the container with the capsules for the samples and the channel part in the TBM are presented in this paper. A laboratory facility for the investigation of the pneumatic parameters and the container moving in the channel is proposed. Neutron calculation is performed to estimate

  19. Upgrading program of the experimental fast reactor Joyo

    Energy Technology Data Exchange (ETDEWEB)

    Yoshida, A.; Yogo, S. [Japan Nuclear Cycle Development Institute, Iibaraki-Ken (Japan)

    2001-07-01

    The experimental fast reactor Joyo finished its operation as an irradiation core in June, 2000. Throughout the operation of MK-I (breeder core) and MK-II (irradiation core), the net operation time has exceeded 60,000 hours. During these operations there were no fuel failures or serious plant problems. The MK-III modification program will improve irradiation capability to demonstrate advanced technologies for commercial Fast Breeder Reactor (FBR). When the MK-III core is started, it will support irradiation tests in feasibility studies for fast reactor and related fuel cycle research and development in Japan. (authors)

  20. Thermal-hydraulic analysis on the whole module of water cooled ceramic breeder blanket for CFETR

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Kecheng; Ma, Xuebin [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); University of Science and Technology of China, Hefei, Anhui, 230027 (China); Cheng, Xiaoman [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); Lin, Shuang [University of Science and Technology of China, Hefei, Anhui, 230027 (China); Huang, Kai [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); Liu, Songlin, E-mail: slliu@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); University of Science and Technology of China, Hefei, Anhui, 230027 (China)

    2016-11-15

    Highlights: • The 3D thermal hydraulic analysis on the whole module of WCCB is performed by CFD method. • Temperature field and mass flow distribution have been obtained. • The design of WCCB is reasonable from the perspective of thermal-hydraulics. • The scheme for further optimization has been proposed. - Abstract: The Water Cooled Ceramic Breeder blanket (WCCB) is being researched for Chinese Fusion Engineering Test Reactor (CFETR). The thermal-hydraulic analysis is essential because the blanket should remove the high heat flux from the plasma and the volumetric heat generated by neutrons. In this paper, the detailed three dimensional (3D) thermal hydraulic analysis on the whole module of WCCB blanket has been performed by Computational Fluid Dynamics (CFD) method, which is capable of solving conjugate heat transfer between solid structure and fluid. The main results, including temperature field, distribution of mass flow rate and coolant pressure drop, have been calculated simultaneously. These provides beneficial guidance data for the further structural optimization and for the design arrangement of primary and secondary circuit. Under the total heat source of 1.23 MW, the coolant mass flow rate of 5.457 kg/s is required to make coolant water corresponding to the Pressurized Water Reactor (PWR) condition (15.5 MPa, 285 °C–325 °C), generating the total coolant pressure drop (△P) of 0.467 MPa. The results show that the present structural design can make all the materials effectively cooled to the allowable temperature range, except for a few small modifications on the both sides of FW. The main components, including the first wall (FW), cooling plates (CPs), side wall (SWs)&stiffening plates (SPs) and the manifold(1–4), dominate 4.7%/41.7%/13%/40.6% of the total pressure drop, respectively. Additionally, the mass flow rate of each channel has been obtained, showing the peak relative deviation of 3.4% and 2% from the average for the paratactic

  1. Investigation of effective factors of transient thermal stress of the MONJU-System components

    Energy Technology Data Exchange (ETDEWEB)

    Inoue, Masaaki; Hirayama, Hiroshi; Kimura, Kimitaka; Jinbo, M. [Toshiba Corp., Kawasaki, Kanagawa (Japan)

    1999-03-01

    Transient thermal stress of each system Component in the fast breeder reactor is an uncertain factor on it's structural design. The temperature distribution in a system component changes over a wide range in time and in space. An unified evaluation technique of thermal, hydraulic, and structural analysis, in which includes thermal striping, temperature stratification, transient thermal stress and the integrity of the system components, is required for the optimum design of tho fast reactor plant. Thermal boundary conditions should be set up by both the transient thermal stress analysis and the structural integrity evaluation of each system component. The reasonable thermal boundary conditions for the design of the MONJU and a demonstration fast reactor, are investigated. The temperature distribution analysis models and the thermal boundary conditions on the Y-piece structural parts of each system component, such as reactor vessel, intermediate heat exchanger, primary main circulation pump, steam generator, superheater and upper structure of reactor core, are illustrated in the report. (M. Suetake)

  2. [Reoccurrence of histomonosis in turkey breeder farm].

    Science.gov (United States)

    Aka, Johannes; Hauck, Rüdiger; Blankenstein, Petra; Balczulat, Stefanie; Hafez, Hafez Mohamed

    2011-01-01

    Histomonosis is a severe disease caused by the protozoan parasite Histomonas (H.) meleagridis, which can lead to high losses in turkeys. The present report describes the reoccurrence of histomonosis in a turkey breeder farm. The first outbreak occurred in 2005 in 17 weeks old hens, the second in 2009 in 8 weeks old hens. The disease remained restricted in one house and one compartment, respectively. Mortality rose to 26 and 65% respectively within few days in spite of therapy with various compounds. Both flocks had to be euthanized. In both cases H. meleagridis belonging to genotype A was detected. The source of infection remained unclear in both cases.

  3. Industrial solar breeder project using concentrator photovoltaics

    Energy Technology Data Exchange (ETDEWEB)

    Hamilton, R; Wohlgemuth, J; Burkholder, J; Levine, A; Storti, G; Wrigley, C; McKegg, A

    1979-08-01

    The purpose of this program is to demonstrate the use of a concentrating photovoltaic system to provide the energy for operating a silicon solar cell production facility, i.e., to demonstrate a solar breeder. Solarex has proposed to conduct the first real test of the solar breeder concept by building and operating a 200 kW(e) (peak) concentrating photovoltaic system based on the prototype and system design developed during Phase I. This system will provide all of the electrical and thermal energy required to operate a solar cell production line. This demonstration would be conducted at the Solarex Rockville facility, with the photovoltaic array located over the company parking lot and on an otherwise unusable flood plain. Phase I of this program included a comprehensive analysis of the application, prototype fabrication and evaluation, system design and specification, and a detailed plan for Phases II and III. A number of prototype tracking concentrator solar collectors were constructed and operated. Extensive system analysis was performed to design the Phase II system as a stand-alone power supply for a solar cell production line. Finally, a detailed system fabrication proposal for Phase II and an operation and evaluation plan for Phase III were completed. These proposals included technical, management, and cost plans for the fabrication and exercise of the proposed system.

  4. Helium heater design for the helium direct cycle component test facility. [for gas-cooled nuclear reactor power plant

    Science.gov (United States)

    Larson, V. R.; Gunn, S. V.; Lee, J. C.

    1975-01-01

    The paper describes a helium heater to be used to conduct non-nuclear demonstration tests of the complete power conversion loop for a direct-cycle gas-cooled nuclear reactor power plant. Requirements for the heater include: heating the helium to a 1500 F temperature, operating at a 1000 psia helium pressure, providing a thermal response capability and helium volume similar to that of the nuclear reactor, and a total heater system helium pressure drop of not more than 15 psi. The unique compact heater system design proposed consists of 18 heater modules; air preheaters, compressors, and compressor drive systems; an integral control system; piping; and auxiliary equipment. The heater modules incorporate the dual-concentric-tube 'Variflux' heat exchanger design which provides a controlled heat flux along the entire length of the tube element. The heater design as proposed will meet all system requirements. The heater uses pressurized combustion (50 psia) to provide intensive heat transfer, and to minimize furnace volume and heat storage mass.

  5. Abrupt or gradual increases in photoperiod for broiler breeders ...

    African Journals Online (AJOL)

    Broiler breeders transferred from closed rearing to curtain-sided adult accommodation (similar to that in which a large proportion of broiler breeders are housed) respond similarly to abrupt and gradual increases in daylength as do birds maintained throughout in controlled environment accommodation, and modern ...

  6. The response of broiler breeder hens to dietary balanced protein

    African Journals Online (AJOL)

    Research

    2016-08-26

    Aug 26, 2016 ... overconsumption of protein and energy. Various estimates of the daily intake of protein required by broiler breeders to support egg production have been made by researchers in the past, these varying from 16.5 g/d, for individually housed breeders. (Pearson & Herron, 1982) to 22 g/d (Waldroup et al., ...

  7. Parameters for quantification of hunger in broiler breeders.

    NARCIS (Netherlands)

    Jong, de I.C.; Voorst, van A.S.; Blokhuis, H.J.

    2003-01-01

    The commercial restricted feeding programme of broiler breeders has a major negative effect on welfare, as the birds are continuously hungry. Objective parameters of hunger are needed to evaluate new management or feeding systems that may alleviate hunger and thus improve broiler breeder welfare.

  8. Staphylococcus agnetis, a potential pathogen in broiler breeders

    DEFF Research Database (Denmark)

    Poulsen, Louise Ladefoged; Thøfner, Ida; Bisgaard, Magne

    2017-01-01

    including bacteriological examination. In total 997 breeders were investigated and for the first time Staphylococcus agnetis was isolated in pure culture from cases of endocarditis and septicemia from 16 broiler breeders. In addition, the cloacal flora from newly hatched chickens originating from the same...

  9. Characteristics of Reproductive Tracts of Repeat Breeders in Cattle ...

    African Journals Online (AJOL)

    The study observed the characteristics and assessed abnormalities in reproductive tracts of repeat breeders in cattle. Fourty (40) herds were sampled during the study and fifty seven (57) repeat breeders were identified. The animals had normal reproductive tracts with good body condition scores (BCS) ranging from 2.5- 4.5 ...

  10. Contribution of reactor physics in past and future. Is reactor physics useful?

    Energy Technology Data Exchange (ETDEWEB)

    Takeda, Toshikazu [Osaka Univ. (Japan); Kosaka, Shinya [TEPCO Systems Co. (Japan); Tatsumi, Masahiro [Nuclear Fuel Industries Ltd., Tokyo (Japan)] (and others)

    2003-02-01

    Reactor Physics is a science to create rector and to play an important role in application to calculation science and safety evaluation. This feature articles contains topics, interested problems and development problems in the following field of reactor physics such as theory and experiment of reactor physics, core control, safety evaluation, criticality safety, accelerator driven subcritical reactor (ADS), new type reactor and evaluation of reactor physics. An original nuclear calculation method developed in Japan has been applied to design and analysis of fast breeder reactor. Interested problems are a proposal of fundamental principles of progressive reactor, development of calculation science, new knowledge by application of best estimate method to safety evaluation and investigation of complicated phenomena of criticality safety. (S.Y.)

  11. Preliminary neutronics design and analysis of helium cooled solid breeder blanket for CFETR

    Energy Technology Data Exchange (ETDEWEB)

    Lv, Zhongliang; Chen, Hongli, E-mail: hlchen1@ustc.edu.cn; Chen, Chong; Li, Min; Zhou, Guangming

    2015-06-15

    Highlights: • Neutronics design of a helium cooled solid breeder blanket for CFETR was presented. • The breeding zones parallel to FW and perpendicular to FW were optimized. • A series of neutronics analyses for the proposed blanket were shown. - Abstract: Chinese Fusion Engineering Test Reactor (CFETR) is a test tokamak reactor being designed in China to bridge the gap between ITER and future fusion power plant. Tritium self-sufficiency is one of the most important issues for CFETR and the tritium breeding ratio (TBR) is recommended not less than 1.2. As one of the candidates, a helium cooled solid breeder blanket for CFETR superconducting tokamak option was proposed. In the concept, radial arranged U-shaped breeding zones are adopted for higher TBR and simpler structure. In this work, three-dimensional neutronics design and analysis of the blanket were performed using the Monte Carlo N-Particle transport code MCNP with IAEA data library FENDL-2.1. Tritium breeding capability of the proposed blanket was assessed and the breeding zones parallel to first wall (FW) and perpendicular to FW were optimized. Meanwhile, the nuclear heating analysis and shielding performance were also presented for later thermal and structural analysis. The results showed that the blanket could well meet the tritium self-sufficiency target and the neutron shield could satisfy the design requirements.

  12. Modeling of quantitative effects of water components on the photocatalytic degradation of 17α-ethynylestradiol in a modified flat plate serpentine reactor.

    Science.gov (United States)

    Wang, Dawei; Li, Yi; Li, Guoping; Wang, Chao; Zhang, Wenlong; Wang, Qing

    2013-06-15

    The effect of water components on the photocatalytic degradation of organic pollutants was incompletely understood, especially in the case of hydroxyl radical (•OH) generation and scavenging. Previous studies have used various methods to determine the rate constants for the reactions between •OH and water components, but the interactions between water components were not taken into concern. In this study, a sequential relative rate technique was used to investigate the effects of water components on the rates of •OH generation and EE2 degradation in a modified flat plate serpentine reactor, including NO₃(-), H₂PO₄(-), SO₄(2-), CO₃(2-), Cl(-), Na(+), Fe(3+), dissolved organic matter (DOM) etc. The results reflected that NO₃(-) and DOM accelerated the photodegradation of 17α-ethynylestradiol (EE2) (3.2% and 21.2%, respectively). Cl(-) and Fe(3+) inhibited that process (5.2% and 3.1%, respectively). Finally, a model for the photocatalytic degradation of EE2 was developed for the first time, taking the obtained rate constants, catalyst concentrations, flow velocities and light intensities into concern. A good agreement was observed between the model and experimental profiles. Copyright © 2013 Elsevier B.V. All rights reserved.

  13. Plasma instabilities of a charge breeder ECRIS

    Science.gov (United States)

    Tarvainen, O.; Angot, J.; Izotov, I.; Skalyga, V.; Koivisto, H.; Thuillier, T.; Kalvas, T.; Lamy, T.

    2017-10-01

    Experimental observation of plasma instabilities in a charge breeder electron cyclotron resonance ion source (CB-ECRIS) is reported. It is demonstrated that the injection of 133Cs+ or 85Rb+ ion beam into the oxygen discharge of the CB-ECRIS can trigger electron cyclotron instabilities, which restricts the parameter space available for the optimization of the charge breeding efficiency. It is concluded that the transition from a stable to unstable plasma regime is caused by gradual accumulation and ionization of Cs/Rb and simultaneous change of the discharge parameters in 10-100 ms time scale, not by a prompt interaction between the incident ion beam and the ECRIS plasma. The instabilities lead to loss of ion confinement, which results in the sputtering of the surfaces in contact with the plasma, followed by up to an order of magnitude increase of impurity currents in the extracted n+ ion beam.

  14. Development of materials and manufacturing technologies for Indian fast reactor programme

    Energy Technology Data Exchange (ETDEWEB)

    Raj, Baldev; Jayakumar, T.; Bhaduri, A.K.; Mandal, Sumantra [Indira Gandhi Centre for Atomic Research, Kalpakkam (India)

    2010-07-01

    Fast Breeder Reactors (FBRs) are vital towards meeting security and sustainability of energy for the growing economy of India. The development of FBRs necessitates extensive research and development in domains of materials and manufacturing technologies in association with a wide spectrum of disciplines and their inter-twining to meet the challenging technology. The paper highlight the work and the approaches adopted for the successful deployment of materials, manufacturing and inspection technologies for the in-core and structural components of current and future Indian Fast Breeder Reactor Programme. Indigenous development of in-core materials viz. Titanium modified austenitic stainless steel (Alloy D9) and its variants, ferritic/martensitic oxide-dispersion strengthened (ODS) steels as well as structural materials viz. 316L(N) stainless steel and modified 9Cr-1Mo have been achieved through synergistic interactions between Indira Gandhi Centre for Atomic Research (IGCAR), education and research institutes and industries. Robust manufacturing technology has been established for forming and joining of various components of 500 MWe Prototype Fast Breeder Reactor (PFBR) through 'science-based technology' approach. To achieve the strict quality standards of formed parts in terms of geometrical tolerances, residual stresses and microstructural defects, FEM-based modelling and experimental validation was carried out for estimation of spring-back during forming of multiple curvature thick plantes. Optimization of grain boundary character distribution in Alloy D9 was carried out by adopting the grain boundary engineering approach to reduce radiation induced segregation. Extensive welding is involved in the fabrication of reactor vessels, piping, steam generators, fuel sub-assemblies etc. Activated Tungsten Inert Gas Welding process along with activated flux developed at IGCAR has been successfully used in fabrication of dummy fuel subassemblies (DFSA) required

  15. Seismic design technology for Breeder Reactor structures. Volume 3: special topics in reactor structures

    Energy Technology Data Exchange (ETDEWEB)

    Reddy, D.P. (ed)

    1983-04-01

    This volume is divided into six chapters: analysis techniques, equivalent damping values, probabilistic design factors, design verifications, equivalent response cycles for fatigue analysis, and seismic isolation. (JDB)

  16. A Rare Case Report of duplicate Vents in a Broiler Breeder Hen (Case Report

    Directory of Open Access Journals (Sweden)

    Madadi MS

    2014-12-01

    Full Text Available Malformations which occur during the development of the avian body organs can lead to structural and functional abnormalities. Most defects are recognized at hatching, but some go undetected until somewhat later. The cause of the majority of animal congenital malformations is unknown. A significant proportion of congenital malformations of unknown cause are likely to have an important genetic component. Malformations of the gastrointestinal and urogenital systems have been observed. This report describes a rare case of duplicate vents in a broiler breeder 33 week-old hen. A normal calcified egg was present in the left oviduct and right oviduct was atrophied. Both cloaca were anatomically normal, and each of them had a complete structure of coprodeum, urodeum and proctodeum. Double vents’ anomalies in breeder hens were only reported by Crew and Roberts in 1928 - 1929 and have not been reported after this time yet.

  17. Gas-cooled reactors: the importance of their development

    Energy Technology Data Exchange (ETDEWEB)

    Kasten, P.R.

    1979-06-01

    The nearest term GCR is the steam-cycle HTGR, which can be used for both power and process steam production. Use of SC-HTGRs permits timely introduction of thorium fuel cycles and of high-thermal-efficiency reactors, decreasing the need for mined U/sub 3/O/sub 8/ before arrival of symbiotic fueling of fast-thermal reactor systems. The gas-turbine HTGR offers prospects of lower capital costs than other nuclear reactors, but it appears to require longer and more costly development than the SC-HTGR. Accelerated development of the GT-HTGR is needed to gain the advantages of timely introduction. The Gas-Cooled Fast Breeder Reactor (GCFR) offers the possibility of fast breeder reactors with lower capital costs and with higher breeding ratios from oxide fuels. The VHTR provides high-temperature heat for hydrogen production.

  18. An analysis system for in-reactor behavior, FANTASI

    Energy Technology Data Exchange (ETDEWEB)

    Uto, Nariaki; Tsukimori, Kazuyuki; Negishi, Hitoshi; Enuma, Yasuhiro; Sugaya, Toshio; Sakai, Kimiaki [Japan Nucler Cycle Developmnet Inst., Tokai, Ibaraki (Japan)

    2001-06-01

    The Japan Nuclear Fuel Cycle Development Institute developed FANTASI (A Computational System For Analyzing Coupled Neutronic, Thermal-Hydraulic And Structural Behaviors In A Fast Breeder Reactor Core) to simulate a conditions where nuclear reaction, thermal-hydraulic behavior of coolant and deformation of core construction progress under mutual relation in reactor of a fast breeder reactor by cooperation of engineers in the fields of physics, thermal-hydraulics, structure, and information system on reactor. Here was described on system construction of FANTASI after describing progress of this development. And then, after introducing a case study using this system, applicability to transient phenomena in nuclear reactor was described. At last, with summarizing results of this development, its future development was also mentioned. (G.K.)

  19. Effects of photochemical smog from a flow reactor on bacteria. II. Determination of bactericidal components in photochemical smog

    Energy Technology Data Exchange (ETDEWEB)

    Nover, H.; Botzenhart, K.

    1983-04-01

    The mixture of substances in the photochemical smog could be detected by different reduction rates of exposed bacteria. Beside ozone other products of the ozone/olefine-reaction could reduce the survival of exposed bacteria. For Staph. epidermidis a toxic influence from the reaction products could be found only after UV-irradiation. The main components were aldehydes, hydrocarbons, radicals, peroxiradicals and radicaloxides. For peroxiacetylnitrate (PAN) no bactericidal effect could be found for bacteria adsorbed on membrane filters in concentrations of 300 ppb in the smog (UV-irradiation was put off for two hours) and even in concentrations of 1000 ppb prepared by gaschromatography. The influence on lipopolysaccharide (lps) defective mutants of Salmonella minnesota showed the protection of the lps-layer against e.g. relative humidity and ozone (500 ppb), but no specific protection against smog components.

  20. Power generation costs for alternate reactor fuel cycles

    Energy Technology Data Exchange (ETDEWEB)

    Smolen, G.R.; Delene, J.G.

    1980-09-01

    The total electric generating costs at the power plant busbar are estimated for various nuclear reactor fuel cycles which may be considered for power generation in the future. The reactor systems include pressurized water reactors (PWR), heavy-water reactors (HWR), high-temperature gas cooled reactors (HTGR), liquid-metal fast breeder reactors (LMFBR), light-water pre-breeder and breeder reactors (LWPR, LWBR), and a fast mixed spectrum reactor (FMSR). Fuel cycles include once-through, uranium-only recycle, and full recycle of the uranium and plutonium in the spent fuel assemblies. The U/sub 3/O/sub 8/ price for economic transition from once-through LWR fuel cycles to both PWR recycle and LMFBR systems is estimated. Electric power generation costs were determined both for a reference set of unit cost parameters and for a range of uncertainty in these parameters. In addition, cost sensitivity parameters are provided so that independent estimations can be made for alternate cost assumptions.

  1. Iron requirements of broiler breeder hens.

    Science.gov (United States)

    Taschetto, Diogo; Vieira, Sergio Luiz; Angel, Clara Roselina; Stefanello, Catarina; Kindlein, Liris; Ebbing, Marco Antonio; Simões, Cristina Tonial

    2017-09-01

    A study was conducted to investigate Fe requirements of broiler breeders. One-hundred-fifty-six Cobb 500 broiler breeder hens were individually placed in electrostatically painted cages at 22 weeks. The study was composed of an adaptation phase, in which hens were fed corn-soy-wheat bran diets until 35 wks. An Fe deficient mash diet (24.6 ppm Fe) was provided from 35 to 46 wk in order to induce a partial body Fe depletion. A production phase followed from 47 to 70 wk when hens were fed 6 diets with increasing Fe sulfate supplementation, which, upon analyses had 24.6, 48.6, 74.3, 99.6, 125.6, and 148.2 ppm Fe. Thirty hatching eggs from each treatment were randomly collected in the last wk of each production period and incubated. Hemoglobin and hematocrit were analyzed from 6 hens as well as all hatched chicks per treatment. Analyses of production and hatching data were conducted using quadratic polynomial (QP), broken-line (BL), and exponential asymptotic (EA) models. Effects of dietary Fe were observed for total eggs and total hatching eggs, egg yolk Fe content, and hen and chick hematocrit and hemoglobin (P < 0.05). These responses to added Fe were optimized when dietary Fe were 96.8, 97.1, 130.6, 122.6, 120.0, and 125.0 ppm (QP) and 76.4, 89.3, 135.0, 128.4, 133.8, and 95.0 ppm (BL) for total hatching eggs, egg yolk Fe content, and hen and chick hematocrit and hemoglobin, respectively. Optimization with the EA model was obtained for total hatching eggs, egg yolk Fe, and hen and chick hemoglobin at 97.9, 111.0, 77.9, and 96.3 ppm Fe for total hatching eggs, egg yolk Fe, and hen and chick hemoglobin, respectively. Adequate Fe levels are needed to maintain egg production as well as hatching chicks' indexes. Fe concentration in the yolk and diet are positively influenced. The average of all Fe requirement estimates obtained in the present study was 106 ppm total Fe, whereas averaged values for BL, QP, and EA models were 107, 113, and 97 ppm Fe, respectively. © 2017

  2. ECRIS as ion source and charge breeder

    CERN Document Server

    Sortais, P; Chauvin, N; Curdy, Jean Claude; Geller, R; Lamy, T; Solé, P; Vieux-Rochaz, J L

    2002-01-01

    We will recall the main characteristics of ECR ion sources and their very good property of ionization efficiency. We will start with a review of on line use of ECR ion sources for production of mono or multicharged radioactive ions, and then we will specially focus our attention on charge breeding process for multicharged ion production. Initially developed for the PIAFE project from ISN Grenoble, the ECR charge breeder shows that the beam injection of a primary beam inside an ECR ion source is a very general process for beam production. We will review the latest results obtained on the ISN Grenoble test bench for the production of CW or pulsed metallic ion beams with the so called '1 sup + /n sup + ' method. New results are given for CW operation where the efficiency is particularly optimized for application to multicharged radioactive ion production (for example, 3.5% for Zn sup 1 sup +->Zn sup 9 sup + , 4.2% for Pb sup 3 sup +->Pb sup 2 sup 4 sup + , 5% for Rb sup 1 sup +->Rb sup 1 sup 5 sup +). Different ...

  3. Development of W-composites/EUROFER brazed joints for the first wall component of future fusion reactors

    Science.gov (United States)

    de Prado, J.; Sánchez, M.; Antusch, S.; Ureña, A.

    2017-12-01

    The present work describes a joining procedure between two different tungsten composite materials (W–2Y2O3 and W–1TiC) with reduced activation ferritic–martensitic steel (Eurofer). The results indicated the achievement, in both cases, of high quality W-composites/Eurofer joints using 80Cu–20Ti as filler material. The braze is constituted by several ternary Cu–Ti–Fe phases distributed along a Cu-matrix, which acts as ductile phase capable of relieving the residual stresses, which could be produced during the service life of the component. Some cracks growing from W–braze interface into the base material have been detected. They are originated by the stresses produced during the cooling stage of the brazing cycle. Regarding the strength of the joints, similar shear strengths of both joints were obtained (∼105 MPa). These values were slightly lower than the ones obtained when pure tungsten was used as the base metal.

  4. Advanced burner test reactor preconceptual design report.

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Y. I.; Finck, P. J.; Grandy, C.; Cahalan, J.; Deitrich, L.; Dunn, F.; Fallin, D.; Farmer, M.; Fanning, T.; Kim, T.; Krajtl, L.; Lomperski, S.; Moisseytsev, A.; Momozaki, Y.; Sienicki, J.; Park, Y.; Tang, Y.; Reed, C.; Tzanos, C; Wiedmeyer, S.; Yang, W.; Chikazawa, Y.; JAEA

    2008-12-16

    advanced fuel cycle; (2) To qualify the transuranics-containing fuels and advanced structural materials needed for a full-scale ABR; and (3) To support the research, development and demonstration required for certification of an ABR standard design by the U.S. Nuclear Regulatory Commission. The ABTR should also address the following additional objectives: (1) To incorporate and demonstrate innovative design concepts and features that may lead to significant improvements in cost, safety, efficiency, reliability, or other favorable characteristics that could promote public acceptance and future private sector investment in ABRs; (2) To demonstrate improved technologies for safeguards and security; and (3) To support development of the U.S. infrastructure for design, fabrication and construction, testing and deployment of systems, structures and components for the ABRs. Based on these objectives, a pre-conceptual design of a 250 MWt ABTR has been developed; it is documented in this report. In addition to meeting the primary and additional objectives listed above, the lessons learned from fast reactor programs in the U.S. and worldwide and the operating experience of more than a dozen fast reactors around the world, in particular the Experimental Breeder Reactor-II have been incorporated into the design of the ABTR to the extent possible.

  5. Conceptual design of solid breeder blanket system cooled by supercritical water

    Energy Technology Data Exchange (ETDEWEB)

    Enoeda, Mikio; Akiba, Masato [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment; Ohara, Yoshihiro [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment] [and others

    2001-12-01

    This report is a summary of the design works, which was discussed in the design workshop held in 2000 for the demonstration (DEMO) blanket aimed to strengthen the commercial competitiveness and technical feasibility simultaneously. The discussion of the Fusion Council in 1999 updated the assessment of the mission of DEMO blanket. Updated mission of the DEMO blanket is to be the prototype of the commercially competitive power plant. The DEMO blanket must supply the feasibility and experience of the total design of the power plant and the materials. From such standing point, the conceptual design study was performed to determine the updated strategy and goal of the R and D of the DEMO blanket which applies the supercritical water cooling proposed in A-SSTR, taking into account the recent progress of the plasma research and reactor engineering technology. The DEMO blanket applies the solid breeder materials and supercritical water cooling. The product tritium is purged out by helium gas stream in the breeder region. In the breeder region, the pebble bed concept was applied to withstand instable cracking of the breeder and multiplier materials in high neutron irradiation and high temperature operation. Inlet temperature of the coolant is planned to be 280degC and final outlet temperature is 510degC to obtain high energy conversion efficiency up to 43%. Reduced activation ferritic steel, F82H and ODS ferritic steel were selected as the structural material. Lithium ceramics, Li{sub 2}TiO{sub 3} or Li{sub 2}O were selected as the breeder materials. Beryllium or its inter-metallic compound Be12Ti was selected as the neutron multiplier materials. Basic module structure was selected as the box type structure which enables the remote handling replacement of the module from in-vessel access. Dimension of the box is limited to 2 m x 2 m, or smaller, due to the dimension of the replacement port. In the supercritical water cooling, the high coolant temperature is the merit for

  6. Environmental Enrichment for Broiler Breeders: An Undeveloped Field.

    Science.gov (United States)

    Riber, Anja B; de Jong, Ingrid C; van de Weerd, Heleen A; Steenfeldt, Sanna

    2017-01-01

    Welfare problems, such as hunger, frustration, aggression, and abnormal sexual behavior, are commonly found in broiler breeder production. To prevent or reduce these welfare problems, it has been suggested to provide stimulating enriched environments. We review the effect of the different types of environmental enrichment for broiler breeders, which have been described in the scientific literature, on behavior and welfare. Environmental enrichment is defined as an improvement of the environment of captive animals, which increases the behavioral opportunities of the animal and leads to improvements in biological function. This definition has been broadened to include practical and economic aspects as any enrichment strategy that adversely affects the health of animals (e.g., environmental hygiene), or that has too many economic or practical constraints will never be implemented on commercial farms and thus never benefit animals. Environmental enrichment for broiler breeders often has the purpose of satisfying the behavioral motivations for feeding and foraging, resting, and/or encouraging normal sexual behavior. Potentially successful enrichments for broiler breeders are elevated resting places, cover panels, and substrate (for broiler breeders housed in cage systems). However, most of the ideas for environmental enrichment for broiler breeders need to be further developed and studied with respect to the use, the effect on behavior and welfare, and the interaction with genotype and production system. In addition, information on practical use and the economics of the production system is often lacking although it is important for application in practice.

  7. Neutronics and thermo-hydraulic design of supercritical-water cooled solid breeder TBM

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, Jie; Wu, Yingwei, E-mail: wyw810@mail.xjtu.edu.cn; Tian, Wenxi; Su, Guanghui; Qiu, Suizheng

    2015-03-15

    Highlights: • A supercritical-water cooled solid breeder test blanket module (SWCB TBM) was designed. • The neutronics calculations show that the tritium breeding ratio (TBR) of SWCB TBM is 1.17. • The outlet temperature of SWCB TBM can reach as high as 500 °C. • Both thermal stress and deformation of the SWCB TBM design are within safety limits. - Abstract: In this paper, the supercritical-water cooled solid breeder test blanket module (SWCB TBM), using the supercritical water as the coolant, Li{sub 4}SiO{sub 4} lithium ceramic pebbles as a breeder, and beryllium pebbles as a neutron multiplier, was designed and analyzed for ITER. The results of neutronics, thermo-hydraulic and thermo-mechanical analysis are presented for the SWCB TBM. Neutronics calculations show that the proposed TBM has high tritium breeding ratio and power density. The tritium breeding ratio (TBR) of the proposed design is 1.17, which is greater than that of 1.15 required for tritium self-sufficiency. The thermo-hydraulic calculation proved that the TBM components can be effectively cooled to the allowable temperature with the temperature of outlet reaching 500 °C. According to thermo-mechanics calculation results, the first wall with the width of 17 mm is safe and the deformation of first wall is far below the limited value. All the results showed that the current TBM design was reasonable under the ITER normal condition.

  8. A comparative study of kinetics of nuclear reactors

    Directory of Open Access Journals (Sweden)

    Obaidurrahman Khalilurrahman

    2009-01-01

    Full Text Available The paper deals with the study of reactivity initiated transients to investigate major differences in the kinetics behavior of various reactor systems under different operating conditions. The article also states guidelines to determine the safety limits on reactivity insertion rates. Three systems, light water reactors (pressurized water reactors, heavy water reactors (pressurized heavy water reactors, and fast breeder reactors are considered for the sake of analysis. The upper safe limits for reactivity insertion rate in these reactor systems are determined. The analyses of transients are performed by a point kinetics computer code, PKOK. A simple but accurate method for accounting total reactivity feedback in kinetics calculations is suggested and used. Parameters governing the kinetics behavior of the core are studied under different core states. A few guidelines are discussed to project the possible kinetics trends in the next generation reactors.

  9. Reactivity control assembly for nuclear reactor. [LMFBR

    Science.gov (United States)

    Bollinger, L.R.

    1982-03-17

    This invention, which resulted from a contact with the United States Department of Energy, relates to a control mechanism for a nuclear reactor and, more particularly, to an assembly for selectively shifting different numbers of reactivity modifying rods into and out of the core of a nuclear reactor. It has been proposed heretofore to control the reactivity of a breeder reactor by varying the depth of insertion of control rods (e.g., rods containing a fertile material such as ThO/sub 2/) in the core of the reactor, thereby varying the amount of neutron-thermalizing coolant and the amount of neutron-capturing material in the core. This invention relates to a mechanism which can advantageously be used in this type of reactor control system.

  10. Thermochemical comparison of the effectiveness of protium purging of fusion breeders

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, A.K.; Johnson, C.E.

    1985-07-01

    The tritium breeders for a fusion reactor, Li/sub 2/0, LiAl0/sub 2/, and Li/sub 4/Si0/sub 4/, are compared on a thermochemical basis in respect to their response to protium purging. Two oxygen activity levels, established by H/sub 2/O:H/sub 2/ ratios of 100: 1 and 1:100 are considered at the temperatures 900 and 1300K. In terms of tritium release (all gaseous forms), LiAl0/sub 2/ is better than Li/sub 2/0 and this in turn better than Li/sub 4/Si0/sub 4/. At 900K, Li/sub 2/0 and LiA10/sub 2/ release more tritium than at 1300K. Li/sub 4/Si0/sub 4/ releases more tritium at 1300K than at 900K.

  11. Thermochemical comparison of the effectiveness of protium purging of fusion breeders

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, A.K.; Johnson, C.E.

    1985-01-01

    The tritium breeders for a fusion reactor, Li/sub 2/O, LiAlO/sub 2/, and Li/sub 4/SiO/sub 4/, are compared on a thermochemical basis in respect to their response to protium purging. Two oxygen activity levels, established by H/sub 2/O:H/sub 2/ ratios of 100:1 and 1:100 are considered at the temperatures 900 and 1300K. In terms of tritium release (all gaseous forms). LiAlO/sub 2/ is better than Li/sub 2/O and this in turn better than Li/sub 4/SiO/sub 4/. At 900K, Li/sub 2/O and LiAlO/sub 2/ release more tritium than at 1300K. Li/sub 4/SiO/sub 4/ releases more tritium at 1300K than at 900K.

  12. DEM-CFD simulation of purge gas flow in a solid breeder pebble bed

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Hao [School of Nuclear Science and Technology, University of Science and Technology of China, Hefei 230027 (China); Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900 (China); Li, Zhenghong [Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900 (China); University of Science and Technology of China, Hefei 230027 (China); Guo, Haibing [Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900 (China); Ye, Minyou [School of Nuclear Science and Technology, University of Science and Technology of China, Hefei 230027 (China); Huang, Hongwen, E-mail: inpclane@sina.com [Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900 (China)

    2016-12-15

    Solid tritium breeding blanket applying pebble bed concept is promising for fusion reactors. Tritium bred in the pebble bed is purged out by inert gas. The flow characteristics of the purge gas are important for the tritium transport from the solid breeder materials. In this study, a randomly packed pebble bed was generated by Discrete Element Method (DEM) and verified by radial porosity distribution. The flow parameters of the purge gas in channels were solved by Computational Fluid Dynamics (CFD) method. The results show that the normalized velocity magnitudes have the same damped oscillating patterns with radial porosity distribution. Besides, the bypass flow near the wall cannot be ignored in this model, and it has a slight increase with inlet velocity. Furthermore, higher purging efficiency becomes with higher inlet velocity and especially higher in near wall region.

  13. Indian fast reactor technology: Current status and future programme

    Indian Academy of Sciences (India)

    The challenges and achievements in science and technology of FBRs focusing on safety are described with the particular reference to 500 MWe capacity Prototype Fast Breeder Reactor (PFBR), being commissioned at Kalpakkam. Roadmap with comprehensive R&D for the large scale deployment of Sodium Cooled Fast ...

  14. Compatibility of sodium with ceramic oxides employed in nuclear reactors; Compatibilidad del sodio con oxidos ceramicos utilizados en reactores nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Acena Moreno, V.

    1981-07-01

    This work is a review of experiments carried out up to the present time on the corrosion and compatibility of ceramic oxides with liquid sodium at temperatures corresponding to those in fast breeder reactors. The review also includes the results of a thermo-dynamic/liquid sodium reactions. The exercise has been conducted with a view to effecting experimental studies in the future. (Author)

  15. Development of reactor graphite

    Science.gov (United States)

    Haag, G.; Mindermann, D.; Wilhelmi, G.; Persicke, H.; Ulsamer, W.

    1990-04-01

    The German graphite development programme for High Temperature Reactors has been based on the assumption that reactor graphite for core components with lifetime fluences of up to 4 × 10 22 neutrons per cm 2 (EDN) at 400°C can be manufactured from regular pitch coke. The use of secondary coke and vibrational moulding techniques have allowed production of materials with very small anisotropy, high strength, and high purity which are the most important properties of reactor graphite. A variety of graphite grades has been tested in fast neutron irradiation experiments. The results show that suitable graphites for modern High Temperature Reactors with spherical fuel elements are available.

  16. Advanced Safeguards Approaches for New Fast Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Durst, Philip C.; Therios, Ike; Bean, Robert; Dougan, A.; Boyer, Brian; Wallace, Rick L.; Ehinger, Michael H.; Kovacic, Don N.; Tolk, K.

    2007-12-15

    This third report in the series reviews possible safeguards approaches for new fast reactors in general, and the ABR in particular. Fast-neutron spectrum reactors have been used since the early 1960s on an experimental and developmental level, generally with fertile blanket fuels to “breed” nuclear fuel such as plutonium. Whether the reactor is designed to breed plutonium, or transmute and “burn” actinides depends mainly on the design of the reactor neutron reflector and the whether the blanket fuel is “fertile” or suitable for transmutation. However, the safeguards issues are very similar, since they pertain mainly to the receipt, shipment and storage of fresh and spent plutonium and actinide-bearing “TRU”-fuel. For these reasons, the design of existing fast reactors and details concerning how they have been safeguarded were studied in developing advanced safeguards approaches for the new fast reactors. In this regard, the design of the Experimental Breeder Reactor-II “EBR-II” at the Idaho National Laboratory (INL) was of interest, because it was designed as a collocated fast reactor with a pyrometallurgical reprocessing and fuel fabrication line – a design option being considered for the ABR. Similarly, the design of the Fast Flux Facility (FFTF) on the Hanford Site was studied, because it was a successful prototype fast reactor that ran for two decades to evaluate fuels and the design for commercial-scale fast reactors.

  17. The TEX-I real-time expert system, applied to situation assessment for the SNR-300 reactor

    Energy Technology Data Exchange (ETDEWEB)

    Schmal, N.; Leder, H.J.; Schade, H.J.

    1988-01-01

    Interatom, a subsidiary company of Siemens, is developing expert systems for the technical domain. These systems are operating in various industrial applications like flexible manufacturing or plant configuration, based on a domain-specific expert system shell, developed by Interatom. Additional projects are focusing on real-time diagnostics, e.g., for nuclear power plants. The authors report in this paper about a diagnosis expert system for the liquid-metal fast breeder reactor SNR-300, which uses new real-time tools, developed within the German TEX-I project (technical expert systems for data interpretation, diagnosis, and process control). The purpose of the system is to support the reactor operators in assessing plant status in real time, based on readings from many sensors. By on-line connection to the process control computer, it can monitor all incoming signal values, check the consistency of data, continuously diagnose the current plant status, detect unusual trends prior to accidents, localize faulty components, and recommended operator response in abnormal conditions. In the present knowledge acquisition and test phase, the expert system is connected to a real-time simulation of the reactor. The simulator is based on a thermohydraulic code for simulation of the transient behavior of temperatures and flow rates in the reactor core, plena, pipes, pumps, valves, intermediate heat exchangers, and cooling components. Additionally, the system's response to an asynchronous operator interaction can be simulated.

  18. Environmental Enrichment for Broiler Breeders: An Undeveloped Field

    DEFF Research Database (Denmark)

    Riber, Anja Brinch; Jong, Ingrid de; van de Werd, Heleen A.

    2017-01-01

    of environmental enrichment for broiler breeders, which have been described in the scientific literature, on behavior and welfare. Environmental enrichment is defined as an improvement of the environment of captive animals, which increases the behavioral opportunities of the animal and leads to improvements...... in biological function. This definition has been broadened to include practical and economic aspects as any enrichment strategy that adversely affects the health of animals (e.g., environmental hygiene), or that has too many economic or practical constraints will never be implemented on commercial farms...... and thus never benefit animals. Environmental enrichment for broiler breeders often has the purpose of satisfying the behavioral motivations for feeding and foraging, resting, and/or encouraging normal sexual behavior. Potentially successful enrichments for broiler breeders are elevated resting places...

  19. An Overview of Reactor Concepts, a Survey of Reactor Designs.

    Science.gov (United States)

    1985-02-01

    implies, this reactor uses gas as the primary coolant . The coolant has a higher exit temperature when leaving the core than the PWR water 6 AFWL-TN-84...nuclear reactors, coolants must be used to ensure material components are not subject to failure due to the temperature exceeding melting points...Reactors that use deu- terium (heavy water) as a coolant can use natural uranium as a fuel. The * Canadian reactor, CANDU , utilizes this concept

  20. H Reactor

    Data.gov (United States)

    Federal Laboratory Consortium — The H Reactor was the first reactor to be built at Hanford after World War II.It became operational in October of 1949, and represented the fourth nuclear reactor on...

  1. Prevalence of Campylobacter jejuni in poultry breeder flocks

    Directory of Open Access Journals (Sweden)

    Ludovico Dipineto

    2010-01-01

    Full Text Available The aim of this work is to present the preliminary results of a study about the prevalence of Campylobacter jejuni in poultry breeder flocks. It was examined three different breeder flocks of Bojano in Molise region. A total of 360 cloacal swabs and 80 enviromental swabs was collected. Of the 3 flocks studied, 6.9% tested were positive for Campylobacter spp. The most-prevalent isolated species is C. jejuni (8.2%. Only 3 of the 360 cloacal swabs samples examined were associated with C. coli. The environmental swabs resulted negative. This results confirms again that poultry is a reservoir of this germ.

  2. Application OF LIBS To Estimate The Age Of Broiler Breeders

    Science.gov (United States)

    Salam, Z. Abdel; Harith, M. A.

    2011-09-01

    Laser Induced Breakdown Spectroscopy (LIBS) is a well-known spectrochemical elemental analysis technique. In our investigations of the LIBS spectra it has been found that there is a remarkable correlation between the ionic to atomic spectral lines emission ratio and the surface hardness of eggshell for two Different Broiler Breeder at different age. The proposed technique has been applied successfully in poultry science to estimate the age of broiler breeders by measuring the surface hardness of their eggshell. The experiments have been performed on two different strains, Arbor Acres plus (AAP) and Hubard Classic (HC), and the results were satisfactory.

  3. Simulation and design of an electron beam ion source charge breeder for the californium rare isotope breeder upgrade

    Directory of Open Access Journals (Sweden)

    Clayton Dickerson

    2013-02-01

    Full Text Available An electron beam ion source (EBIS will be constructed and used to charge breed ions from the californium rare isotope breeder upgrade (CARIBU for postacceleration into the Argonne tandem linear accelerator system (ATLAS. Simulations of the EBIS charge breeder performance and the related ion transport systems are reported. Propagation of the electron beam through the EBIS was verified, and the anticipated incident power density within the electron collector was identified. The full normalized acceptance of the charge breeder with a 2 A electron beam, 0.024π  mm mrad for nominal operating parameters, was determined by simulating ion injection into the EBIS. The optics of the ion transport lines were carefully optimized to achieve well-matched ion injection, to minimize emittance growth of the injected and extracted ion beams, and to enable adequate testing of the charge bred ions prior to installation in ATLAS.

  4. A comparison of radioactive waste from first generation fusion reactors and fast fission reactors with actinide recycling

    Energy Technology Data Exchange (ETDEWEB)

    Koch, M.; Kazimi, M.S.

    1991-04-01

    Limitations of the fission fuel resources will presumably mandate the replacement of thermal fission reactors by fast fission reactors that operate on a self-sufficient closed fuel cycle. This replacement might take place within the next one hundred years, so the direct competitors of fusion reactors will be fission reactors of the latter rather than the former type. Also, fast fission reactors, in contrast to thermal fission reactors, have the potential for transmuting long-lived actinides into short-lived fission products. The associated reduction of the long-term activation of radioactive waste due to actinides makes the comparison of radioactive waste from fast fission reactors to that from fusion reactors more rewarding than the comparison of radioactive waste from thermal fission reactors to that from fusion reactors. Radioactive waste from an experimental and a commercial fast fission reactor and an experimental and a commercial fusion reactor has been characterized. The fast fission reactors chosen for this study were the Experimental Breeder Reactor 2 and the Integral Fast Reactor. The fusion reactors chosen for this study were the International Thermonuclear Experimental Reactor and a Reduced Activation Ferrite Helium Tokamak. The comparison of radioactive waste parameters shows that radioactive waste from the experimental fast fission reactor may be less hazardous than that from the experimental fusion reactor. Inclusion of the actinides would reverse this conclusion only in the long-term. Radioactive waste from the commercial fusion reactor may always be less hazardous than that from the commercial fast fission reactor, irrespective of the inclusion or exclusion of the actinides. The fusion waste would even be far less hazardous, if advanced structural materials, like silicon carbide or vanadium alloy, were employed.

  5. Study on in-vessel thermohydraulics phenomena of sodium-cooled fast reactors. 2. Numerical investigations on proprieties of R/V upper plenum separation

    Energy Technology Data Exchange (ETDEWEB)

    Muramatsu, Toshiharu; Yamaguchi, Akira [Japan Nuclear Cycle Development Inst., Oarai, Ibaraki (Japan). Oarai Engineering Center; Murakami, Satoshi [Customer System Co. Ltd., Tokai, Ibaraki (Japan)

    2002-03-01

    A large-scale sodium-cooled fast breeder reactor investigated in the feasibility studies on commercialized fast reactors has a tendency of consideration of thorough simplified and compacted system designs to realize drastic economical improvements. Therefore, special attention should be paid to thermohydraulic designs for gas entrainment behavior from free surfaces, a flow-induced vibration of in-vessel components, thermal shock for various structures due to high-speed coolant flows, nonsymmetrical coolant flows, etc. in the reactor vessel. In-vessel thermohydraulic analyses were carried out using a multi-dimensional code AQUA to contribute to a planning of water scaled-model experiments for the separated upper plena of the reactor vessel. >From the analysis, the following results were obtained. (1) It can be considered that there is little effect of volumetric flow rate between the upper plenum and the free surface plenum on hydrodynamic characteristics in the whole upper plenum. Because the affected area is limited in the neighborhood of gaps of hot/cold leg pipes. (2) Change in flow velocity components is limited around the outer wall of hot leg pipes if the gap width of the dipped plate and penetrating components changes. From the above results, it was concluded that the assumption seems to be valid that the free surface plenum hydrodynamic characteristics is independent of the upper plenum flows. However it is necessary to consider jet effects due to the hot leg intake flows affecting vortex concentrations in the upper plenum. (author)

  6. APPLICATIONS OF LASERS AND OTHER TOPICS IN LASER PHYSICS AND TECHNOLOGY: Hybrid reactor based on laser thermonuclear fusion

    Science.gov (United States)

    Basov, N. G.; Belousov, N. I.; Grishunin, P. A.; Kalmykov, Yu K.; Lebo, I. G.; Rozanov, Vladislav B.; Sklizkov, G. V.; Subbotin, V. I.; Finkel'shteĭn, K. I.; Kharitonov, V. V.; Sherstnev, K. B.

    1987-10-01

    A physicotechnical and parametric analysis is used as the basis for a conceptual design of a thermonuclear inertial-confinement hybrid reactor as a breeder of fuel for fission nuclear power stations. It is proposed to use a laser as a driver in this reactor.

  7. Quantitative feed restriction of Pekin breeder ducks during the ...

    African Journals Online (AJOL)

    Quantitative feed restriction of Pekin breeder ducks during the rearing period and its effect on subsequent productivity. M.D. Olver. Animal and Dairy Science Research Institute, Irene. Six male and 24 female Pekin ducks per pen were randomly allocated to 12pens to test the effects of quantitative feed restriction during the ...

  8. Semen bacterial flora of Rhode Island Breeder cocks in Zaria ...

    African Journals Online (AJOL)

    The semen used in this study was collected from 77 Rhode Island Breeder cocks reared in battery cages under intensive management from a private farm in Zaria, Kaduna State, Nigeria using the back massage procedure, 27 of the 77 semen samples (35.1%) contained bacterial isolates. None of the samples grew fungi.

  9. The response of broiler breeder hens to dietary balanced protein ...

    African Journals Online (AJOL)

    Two basal feeds (118 and 175 g protein/kg) with similar balanced amino acid mixtures were appropriately blended to produce six experimental diets differing in protein. These were fed for six weeks to 180 broiler breeder hens (Ross 308) housed in individual cages from 26 w of age. A 13 h photoperiod was applied. Half the ...

  10. Environmental Enrichment for Broiler Breeders: An Undeveloped Field

    NARCIS (Netherlands)

    Riber, Anja B.; Jong, de Ingrid; Weerd, van de Heleen A.; Steenfeldt, Sanna

    2017-01-01

    Welfare problems, such as hunger, frustration, aggression, and abnormal sexual behavior, are commonly found in broiler breeder production. To prevent or reduce these welfare problems, it has been suggested to provide stimulating enriched environments. We review the effect of the different types of

  11. Impact of nutrition on welfare aspects of broiler breeder flocks

    NARCIS (Netherlands)

    Krimpen, van M.M.; Jong, de I.C.

    2014-01-01

    To ensure health and reproductive performance, broiler breeders are feed restricted during the rearing period and, to a lesser extent, during the production period. Although restricted feeding improves health and bird welfare, on the other hand the birds are chronically hungry and suffer from

  12. Feeding broiler breeder flocks in relation to bird welfare aspects

    NARCIS (Netherlands)

    Jong, de I.C.; Krimpen, van M.M.

    2011-01-01

    To ensure health and reproductive capacity of the birds, broiler breeders are fed restricted during the rearing period, and to a lesser extent also during the production period. Although restricted feeding improves health and thereby bird welfare, on the other hand the birds are chronically hungry

  13. Response of Japanese Breeder Quails to Varying Dietary Protein ...

    African Journals Online (AJOL)

    A three months feeding trial was conducted to assess the effects of feeding varying levels of dietary protein on productive performance, egg quality characteristics and hatchability using 930 six weeks breeders quails. The birds were randomly divided into five dietary treatment groups of 186 birds, and were further replicated ...

  14. Feeding broiler breeders to improve their welfare whilst maintaining productivity

    DEFF Research Database (Denmark)

    Steenfeldt, Sanna; Nielsen, Birte Lindstrøm

    of their litter may have affected their thermoregulation. This experiment indicates that high fibre diets can alleviate the feeling of hunger currently experienced by broiler breeders, and a high ratio of insoluble fibre can reduce stereotypies and may improve the well-being of the birds....

  15. Utilisation of synthetic amino acids by broiler breeder hens | Nonis ...

    African Journals Online (AJOL)

    This study was conducted to examine the response of broiler breeder hens to feeds supplemented with synthetic lysine and methionine when fed once or twice daily during peak production. Replacing intact protein with increasing amounts of free lysine and methionine, up to 2.3 g/kg feed, had no effect on feed intake, ...

  16. Vaccination Strategies in Breeder and Commercial Farms and ...

    African Journals Online (AJOL)

    In Nigeria infectious bursal disease (IBD) outbreaks have persisted despite routine vaccination. In a quest to determine some of the causes of the vaccination failures, the type of vaccines, vaccination schedules and seromonitoring for antibodies in breeder and commercial farms were investigated using structured ...

  17. Feeding Programs for Broiler Breeders in the Start Phase

    Directory of Open Access Journals (Sweden)

    J Tremarin

    Full Text Available ABSTRACT The fast-growing Brazilian aviculture requires studies to improve zootechnical performance indexes for broiler breeders. The purpose of this study was to assess different feeding programs for broiler breeders on performance and development of digestive organs. A total of 48,000, 1d-old, Cobb 500 broiler breeders were divided into two sheds with 24,000 birds each. The experiment was randomized in block design, considering each shed a block, with 4 treatments and 6 replications per treatment with 2,000 birds in each. Treatments consisted of: Shed 1 T1 = starter feed; T2 = T1 + probiotics; Shed 2 T3 = pre-starter feed; T4 = T3 + probiotics. The productive performance characteristics (bird weight, weight gain, feed intake and feed conversion, the development of digestive organs (gizzard, proventriculus, spleen, bursa of Fabricius and small bowel as well as the small bowel length were assessed weekly for all experimental groups, in samples of 10 birds per treatment. The best feed conversion and weight gain were observed with pre-starter feed in the first 7 days of age, with or without probiotic. Small bowel, gizzard and proventriculus development at 28 days was better for birds on pre-starter feed compared to those on starter feed alone. It is possible to conclude that broiler breeders on pre-starter feed during the first 7 days of age are likely to show better physical and productive performances in the adult phase.

  18. Fast neutron breeder reactor Rapsodie - situation of physics, hydraulic, thermal and dynamics studies and studies of stability early in 1963; Pile rapide rapsodie - point des etudes neutroniques, hydrauliques, thermiques et dynamiques et des etudes de stabilite au debut de l'annee 1963

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1964-07-01

    Early in 1963, it was necessary to make a choice among the two fuels examined for Rapsodie: the UPuMo alloy with double cladding, Nb and stainless steel, and the UO{sub 2}-PuO{sub 2} mix oxide. This report presents the results of the studies effected with the two types of fuel. We reconsider at first the different models which have been studied and we give a detailed description of the alloy and oxide cores as they are envisaged early in 1963. We give then the most important physics performances of the two cores: neutron flux and spectrum, reactivity of the compensation find safety rods, neutrons balance, specific power, effective fraction of delayed neutrons, lifetime of the prompt neutrons, reactivity coefficient. We describe the hydraulic studies and experiments which have been done concerning the two cores. We discuss the criteria adopted as basis for the flow calculations. We give the results of pressure drop and sub-assembly lifting, force measurements, and vibration and pin flow distribution experiments. We discuss the constants utilized for the thermal calculations and we give the temperatures of sodium and alloy or oxide fuel, the temperature increases due to the hot points, and the limitation of the oxide fuel burn-up, originated by the pressure of the fission gases. We treat the hypotheses having been utilized for the dynamics calculations and we describe the different accidents which have been studied. We give the results of the calculations for every accident and each fuel, and we show fuel melting or sodium boiling can be avoided, even in case of the most pessimistic hypotheses, by modifying reactor characteristics (shim-rod reactivity or power of the reactor with only one cooling circuit). The reactor stability has been evaluated with the hypotheses utilized for the dynamics calculations, except of the Doppler coefficient which was intentionally increased. We show that the alloy and oxide cores are stable for every envisaged reactor power. (authors

  19. Studies on serum macro and micro minerals status in repeat breeder ...

    African Journals Online (AJOL)

    ... 87%; whereas in repeat breeder control buffaloes, the overall pregnancy rate was 21%. In conclusion, the concentrations of macro and micro minerals were significantly lower in repeat breeder buffaloes and mineral mixtures should be added in the food stuff to improve reproductive efficiency of repeat breeder buffaloes.

  20. Economic and welfare benefits of environmental enrichment for broiler breeders.

    Science.gov (United States)

    Leone, E H; Estévez, I

    2008-01-01

    Designs to enrich the environment are crucial in the effort to fully address the biological needs of domestic animals. Although enrichment programs have been shown to improve health and welfare, little is known of their potential for application to commercial broiler breeder environments. We investigated the potential benefits of cover panels for broiler breeder reproductive performance in a commercial setting. This demonstration trial occurred on 5 commercial broiler breeder farms, each with a control and panel treatment room containing approximately 7,000 females and 800 males. Reproductive performance was measured from 25 to 60 wk by the number of eggs laid per female per week as well as weekly fertility and hatchability rates. The location of marked males was recorded weekly to quantify male movement. Access to cover panels improved egg production by 2.1% and maintained better hatchability and fertility throughout the breeding cycle (significant interactions of age and panel treatment) leading to an additional 4.5 chicks/female. Male home ranges, based on minimum convex polygons, were larger in the enriched (259 +/- 24.4 m(2)) vs. control flocks (184 +/- 23.1 m(2)). Providing enrichment in the form of cover panels improved reproductive performance, most likely by increasing males' mating opportunities and reducing female stress. We found a clear economic benefit to providing enrichment, an estimated $3 million if all breeder houses within the participating company were outfitted with the panels. These results demonstrate that environmental enrichment is not only beneficial for broiler breeder welfare, but can also be economically advantageous, resulting in a win-win situation for poultry welfare and production.

  1. Optimization of mass-production conditions for tritium breeder pebbles based on slurry droplet wetting method

    Energy Technology Data Exchange (ETDEWEB)

    Park, Yi-Hyun, E-mail: yhpark@nfri.re.kr [National Fusion Research Institute, Daejeon (Korea, Republic of); Min, Kyung-Mi; Ahn, Mu-Young; Cho, Seungyon; Lee, Young-Min [National Fusion Research Institute, Daejeon (Korea, Republic of); Park, Sang-Jin; Danish, Rehan; Lim, Chul-Hwan; Jo, Yong-Dae [IVT Co., Ltd., Daegu (Korea, Republic of)

    2016-11-01

    Highlights: • An automatic dispensing system was developed to improve uniformity and production rate of breeder pebbles. • The production rate of this system for Li{sub 2}TiO{sub 3} pebble was estimated at 50 kg/year. • The optimization of dispensing and sintering conditions for the mass-production of Li{sub 2}TiO{sub 3} pebble was conducted. • Integrity of Li{sub 2}TiO{sub 3} pebble was able to be ensured during mass-production process, especially during batch process. - Abstract: Lithium metatitanate (Li{sub 2}TiO{sub 3}) is being considered as tritium breeding material for solid-type breeding blanket, which are used in pebble-bed form. The total amount of Li{sub 2}TiO{sub 3} pebbles in Helium Cooled Ceramic Reflector (HCCR) Test Blanket Module (TBM) is approximately 80 kg. Furthermore, DEMO reactor requires a great deal of breeder pebbles. Therefore, the development of mass-production system for breeder pebbles is necessary. The slurry droplet wetting method was adopted in the mass-production process for Li{sub 2}TiO{sub 3} pebbles, which had been developed in Korea. In this method, an automatic slurry dispensing system is one of the key apparatuses because the uniformity of pebbles and production rate are able to be improved. The system was successfully manufactured, which was consisted of a dispensing unit for instillation of Li{sub 2}TiO{sub 3} slurry, a glycerin bath for hardening of droplets, and an automatic maintaining unit for constant distance between syringe needle and glycerin surface. The production rate of this system for Li{sub 2}TiO{sub 3} pebble was estimated at 50 kg/year. In this study, it was investigated that the effect of dispensing and sintering conditions on the mass-production of Li{sub 2}TiO{sub 3} pebbles.

  2. Reactor Physics

    Energy Technology Data Exchange (ETDEWEB)

    Ait Abderrahim, A

    2001-04-01

    The Reactor Physics and MYRRHA Department of SCK-CEN offers expertise in various areas of reactor physics, in particular in neutronics calculations, reactor dosimetry, reactor operation, reactor safety and control and non-destructive analysis of reactor fuel. This expertise is applied in the Department's own research projects in the VENUS critical facility, in the BR1 reactor and in the MYRRHA project (this project aims at designing a prototype Accelerator Driven System). Available expertise is also used in programmes external to the Department such as the reactor pressure steel vessel programme, the BR2 reactor dosimetry, and the preparation and interpretation of irradiation experiments by means of neutron and gamma calculations. The activities of the Fuzzy Logic and Intelligent Technologies in Nuclear Science programme cover several domains outside the department. Progress and achievements in these topical areas in 2000 are summarised.

  3. Stress state dependence of in-reactor creep and swelling. Part 2: Experimental results

    Science.gov (United States)

    Hall, M. M., Jr.; Flinn, J. E.

    2010-01-01

    Irradiation creep constitutive equations, which were developed in Part I, are used here to analyze in-reactor creep and swelling data obtained ca. 1977-1979 as part of the US breeder reactor program. The equations were developed according to the principles of incremental continuum plasticity for the purpose of analyzing data obtained from a novel irradiation experiment that was conducted, in part, using Type 304 stainless steel that had been previously irradiated to significant levels of void swelling. Analyses of these data support an earlier observation that all stress states, whether tensile, compressive, shear or mixed, can affect both void swelling and interactions between irradiation creep and swelling. The data were obtained using a set of five unique multiaxial creep-test specimens that were designed and used for the first time in this study. The data analyses demonstrate that the constitutive equations derived in Part I provide an excellent phenomenological representation of the interactive creep and swelling phenomena. These equations provide nuclear power reactor designers and analysts with a first-of-its-kind structural analysis tool for evaluating irradiation damage-dependent distortion of complex structural components having gradients in neutron damage rate, temperature and stress state.

  4. Reactor safeguards

    CERN Document Server

    Russell, Charles R

    1962-01-01

    Reactor Safeguards provides information for all who are interested in the subject of reactor safeguards. Much of the material is descriptive although some sections are written for the engineer or physicist directly concerned with hazards analysis or site selection problems. The book opens with an introductory chapter on radiation hazards, the construction of nuclear reactors, safety issues, and the operation of nuclear reactors. This is followed by separate chapters that discuss radioactive materials, reactor kinetics, control and safety systems, containment, safety features for water reactor

  5. Reactor operation

    CERN Document Server

    Shaw, J

    2013-01-01

    Reactor Operation covers the theoretical aspects and design information of nuclear reactors. This book is composed of nine chapters that also consider their control, calibration, and experimentation.The opening chapters present the general problems of reactor operation and the principles of reactor control and operation. The succeeding chapters deal with the instrumentation, start-up, pre-commissioning, and physical experiments of nuclear reactors. The remaining chapters are devoted to the control rod calibrations and temperature coefficient measurements in the reactor. These chapters also exp

  6. Correlations among behavior, performance and environment in broiler breeders using multivariate analysis

    Directory of Open Access Journals (Sweden)

    DF Pereira

    2007-12-01

    Full Text Available Animal welfare issues have received much attention not only to supply farmed animal requirements, but also to ethical and cultural public concerns. Daily collected information, as well as the systematic follow-up of production stages, produces important statistical data for production assessment and control, as well as for improvement possibilities. In this scenario, this research study analyzed behavioral, production, and environmental data using Main Component Multivariable Analysis, which correlated observed behaviors, recorded using video cameras and electronic identification, with performance parameters of female broiler breeders. The aim was to start building a system to support decision-making in broiler breeder housing, based on bird behavioral parameters. Birds were housed in an environmental chamber, with three pens with different controlled environments. Bird sensitivity to environmental conditions were indicated by their behaviors, stressing the importance of behavioral observations for modern poultry management. A strong association between performance parameters and the behavior "at the nest", suggesting that this behavior may be used to predict productivity. The behaviors of "ruffling feathers", "opening wings", "preening", and "at the drinker" were negatively correlated with environmental temperature, suggesting that the increase of in the frequency of these behaviors indicate improvement of thermal welfare.

  7. The International Breeder's Rights System and Crop Plant Innovation.

    Science.gov (United States)

    Barton, J H

    1982-06-04

    Legal arrangements governing a plant breeder's intellectual property rights to his inventions are likely to affect the future of crop research. Such systems, although controversial, are probably currently desirable for the developed world. The new genetic technologies may change this judgment, and certainly require redefinition of the lines between plant patents and regular patents. Several safeguards, present in the United States breeder's rights law, should be applied more broadly. A new safeguard-of ensuring that material be entered into germplasm banks-should be applied everywhere. For the developing world, the desirability of a plant patent system is much less clear; new agreements may be desirable to ensure the free flow and collection of germplasm.

  8. The Effect of Degree of Photostimulation on Male Broiler Breeder ...

    African Journals Online (AJOL)

    Nicky

    Abstract. The effect of photostimulation of male broiler breeders (n = 144) to different photoperiods (8-h control and 9, 9.5, 10, 10.5, 11, 11.5, 12, 12.5, 13, 14 and 18 h) applied at 20 weeks of age, on age at first semen production, testis weights, as predicted by comb area, and semen characteristics at the reported age at first.

  9. Research Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Martens, Frederick H. [Argonne National Laboratory; Jacobson, Norman H.

    1968-09-01

    This booklet discusses research reactors - reactors designed to provide a source of neutrons and/or gamma radiation for research, or to aid in the investigation of the effects of radiation on any type of material.

  10. Study of the pyrochemical treatment-recycling process of the Molten Salt Reactor fuel; Estudio de sistema de un proceso de tratamiento-reciclaje piroquimico del combustible de un reactor de sales fundidas

    Energy Technology Data Exchange (ETDEWEB)

    Boussier, H.; Heuer, D.

    2010-07-01

    The Separation Processes Studies Laboratory (Commissariat a l'energie Atomique) has made a preliminary assessment of the reprocessing system associated with Molten Salt Fast Reactor (MSFR). The scheme studied in this paper is based on the principle of reductive extraction and metal transfer that constituted the core process designed for the Molten Salt Breeder Reactor (MSBR), although the flow diagram has been adapted to the current needs of the Molten Salt Fast Reactor (MSFR).

  11. Nuclear proliferation and civilian nuclear power: report of the Nonproliferation Alternative Systems Assessment Program. Volume IX. Reactor and fuel cycle descriptions

    Energy Technology Data Exchange (ETDEWEB)

    1979-12-01

    The Nonproliferation Alternative Systems Assessment Program (NASAP) has characterized and assessed various reactor/fuel-cycle systems. Volume IX provides, in summary form, the technical descriptions of the reactor/fuel-cycle systems studied. This includes the status of the system technology, as well as a discussion of the safety, environmental, and licensing needs from a technical perspective. This information was then used in developing the research, development, and demonstration (RD and D) program, including its cost and time frame, to advance the existing technology to the level needed for commercial use. Wherever possible, the cost data are given as ranges to reflect the uncertainties in the estimates. Volume IX is divided into three sections: Chapter 1, Reactor Systems; Chapter 2, Fuel-Cycle Systems; and the Appendixes. Chapter 1 contains the characterizations of the following 12 reactor types: light-water reactor; heavy-water reactor; water-cooled breeder reactor; high-temperature gas-cooled reactor; gas-cooled fast reactor; liquid-metal fast breeder reactor; spectral-shift-controlled reactor; accelerator-driven reactor; molten-salt reactor; gaseous-core reactor; tokamak fusion-fisson hybrid reactor; and fast mixed-spectrum reactor. Chapter 2 contains similar information developed for fuel-cycle facilities in the following categories: mining and milling; conversion and enrichment; fuel fabrication; spent fuel reprocessing; waste handling and disposal; and transportation of nuclear materials.

  12. CONVECTION REACTOR

    Science.gov (United States)

    Hammond, R.P.; King, L.D.P.

    1960-03-22

    An homogeneous nuclear power reactor utilizing convection circulation of the liquid fuel is proposed. The reactor has an internal heat exchanger looated in the same pressure vessel as the critical assembly, thereby eliminating necessity for handling the hot liquid fuel outside the reactor pressure vessel during normal operation. The liquid fuel used in this reactor eliminates the necessity for extensive radiolytic gas rocombination apparatus, and the reactor is resiliently pressurized and, without any movable mechanical apparatus, automatically regulates itself to the condition of criticality during moderate variations in temperature snd pressure and shuts itself down as the pressure exceeds a predetermined safe operating value.

  13. Pebble Bed Reactor: core physics and fuel cycle analysis

    Energy Technology Data Exchange (ETDEWEB)

    Vondy, D.R.; Worley, B.A.

    1979-10-01

    The Pebble Bed Reactor is a gas-cooled, graphite-moderated high-temperature reactor that is continuously fueled with small spherical fuel elements. The projected performance was studied over a broad range of reactor applicability. Calculations were done for a burner on a throwaway cycle, a converter with recycle, a prebreeder and breeder. The thorium fuel cycle was considered using low, medium (denatured), and highly enriched uranium. The base calculations were carried out for electrical energy generation in a 1200 MW/sub e/ plant. A steady-state, continuous-fueling model was developed and one- and two-dimensional calculations were used to characterize performance. Treating a single point in time effects considerable savings in computer time as opposed to following a long reactor history, permitting evaluation of reactor performance over a broad range of design parameters and operating modes.

  14. Advanced reactor safety research quarterly report, October-December 1982. Volume 24

    Energy Technology Data Exchange (ETDEWEB)

    None

    1984-04-01

    This report describes progress in a number of activities dealing with current safety issues relevant to both light water reactors (LWRs) and breeder reactors. The work includes a broad range of experiments to simulate accidental conditions to provide the required data base to understand important accident sequences and to serve as a basis for development and verification of the complex computer simulation models and codes used in accident analysis and licensing reviews. Such a program must include the development of analytical models, verified by experiment, which can be used to predict reactor and safety system performance under a broad variety of abnormal conditions. Current major emphasis is focused on providing information to NRC relevant to (1) its deliberations and decisions dealing with severe LWR accidents and (2) its safety evaluation of the proposed Clinch River Breeder Reactor.

  15. Reactor Materials Program - Baseline Material Property Handbook - Mechanical Properties of 1950's Vintage Stainless Steel Weldment Components, Task Number 89-23-A-1

    Energy Technology Data Exchange (ETDEWEB)

    Stoner, K.J.

    1999-11-05

    The Process Water System (primary coolant) piping of the nuclear production reactors constructed in the 1950''s at Savannah River Site is comprised primarily of Type 304 stainless steel with Type 308 stainless steel weld filler. A program to measure the mechanical properties of archival PWS piping and weld materials (having approximately six years of service at temperatures between 25 and 100 degrees C) has been completed. The results from the mechanical testing has been synthesized to provide a mechanical properties database for structural analyses of the SRS piping.

  16. Outline of the safety research results, in the power reactor field, fiscal year 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-11-01

    The Power Reactor and Nuclear Fuel Development Corporation (PNC) has promoted the safety research in fiscal year of 1996 according to the Fundamental Research on Safety Research (fiscal year 1996 to 2000) prepared on March, 1996. Here is described on the research results in fiscal year 1996, the first year of the 5 years programme, and whole outline of the fundamental research on safety research, on the power reactor field (whole problems on the new nuclear converter and the fast breeder reactor field and problems relating to the power reactor in the safety for earthquake and probability theoretical safety evaluation field). (G.K.)

  17. Gas-cooled fast reactor program. Progress report, January 1, 1980-June 30, 1981

    Energy Technology Data Exchange (ETDEWEB)

    Kasten, P.R.

    1981-09-01

    Since the national Gas-Cooled Fast Breeder Reactor Program has been terminated, this document is the last progress report until reinstatement. It is divided into three sections: Core Flow Test Loop, GCFR shielding and physics, and GCFR pressure vessel and closure studies. (DLC)

  18. Fabrication Technological Development of the Oxide Dispersion Strengthened Alloy MA957 for Fast Reactor Applications

    Energy Technology Data Exchange (ETDEWEB)

    Hamilton, Margaret L.; Gelles, David S.; Lobsinger, Ralph J.; Johnson, Gerald D.; Brown, W. F.; Paxton, Michael M.; Puigh, Raymond J.; Eiholzer, Cheryl R.; Martinez, C.; Blotter, M. A.

    2000-02-28

    A significant amount of effort has been devoted to determining the properties and understanding the behavior of the alloy MA957 to define its potential usefulness as a cladding material in the fast breeder reactor program. The numerous characterization and fabrication studies that were conducted are documented in this report.

  19. Engineering studies to support a liquid sodium cooled pebble bed target/blanket for an accelerator breeder

    Energy Technology Data Exchange (ETDEWEB)

    Cooper, K.C.; Malenfant, R.E.

    1977-01-01

    Preliminary calculations on using a liquid sodium cooled pebble bed of thorium metal for the target and blanket of a particle accelerator to convert fertile material to fissile have indicated the concept has considerable merit. Fuel management is simple and continuous on-line feed is effected. Additional features include excellent heat transfer, low pressure drop, minimization of structures and enhanced safety. Promising features strongly suggest that the work be continued to further refine the studies. Although specific to the target and blanket of the accelerator breeder concept, the work is readily extended to a high efficiency liquid metal cooled nuclear reactor employing a pebble bed as the fuel. 10 refs., 4 figs., 1 tab.

  20. Lay-out and materials for in pile tritium transport testing of breeder-inside-tube pin assemblies

    Energy Technology Data Exchange (ETDEWEB)

    Alvani, C. [ENEA, CR Casaccia, Rome (Italy); Avon, J. [ENEA, CR Casaccia, Rome (Italy)]|[CEA, CEN, Grenoble (France); Casadio, S. [ENEA, CR Casaccia, Rome (Italy); Mancini, M.R. [ENEA, CR Casaccia, Rome (Italy); Nannetti, C.A. [ENEA, CR Casaccia, Rome (Italy); Pruzzo, G. [ENEA, CR Casaccia, Rome (Italy)]|[FN, Bosco Marengo-Alessandria (Italy); Ravel, S. [ENEA, CR Casaccia, Rome (Italy)]|[CEA, CEN, Grenoble (France); Roux, N. [ENEA, CR Casaccia, Rome (Italy)]|[CEA, CEN Saclay, Gif-sur-Yvette (France); Terlain, A. [ENEA, CR Casaccia, Rome (Italy)]|[CEA, CEN, Fontenay-aux-Roses (France); Terrosi [ENEA, CR Casaccia, Rome (Italy)]|[FN, Bosco Marengo-Alessandria (Italy); Zaghini, P. [ENEA, CR Casaccia, Rome (Italy)]|[FIN-Ceramica, Faenza, Ravenna (Italy); Zanardi, P. [ENEA, CR Casaccia, Rome (Italy)]|[ENEA, CR Clementel-Bologna (Italy); Zanotti, M. [ENEA, CR Casaccia, Rome (Italy)]|[ENEA, CR Clementel-Bologna (Italy)

    1995-12-31

    An irradiation experiment (90 FPD in SILOE reactor) has been designed in order to evaluate the in-situ effect of red-ox power of sweeping gas (helium with 100 vpm of H{sub 2}/H{sub 2}O with relative concentrations varying from pure H{sub 2} to pure H{sub 2}O) on (a) Tritium removal from LiAlO{sub 2} and Li{sub 2}ZrO{sub 3}; (b) Tritium permeation through AISI-316L SS tubes with bare and coated surfaces. The conditions and materials explored were selected in order to test possible improvements with respect to critical issues for the `Breeder Inside Tube` (BIT) blanket concept development. (orig.).

  1. Ochratoxicosis in White Leghorn breeder hens: Production and breeding performance

    Directory of Open Access Journals (Sweden)

    Zahoor Ul Hassan*, Muhammad Zargham Khan, Ahrar Khan, Ijaz Javed1, Umer Sadique2 and Aisha Khatoon

    2012-10-01

    Full Text Available This study was designed to evaluate the effect of Ochratoxin A (OTA upon production and breeding parameters in White Leghorn (WL breeder hens. For this purpose, 84 WL breeder hens were divided into seven groups (A-G. The hens in these groups were maintained on feed contaminated with OTA @ 0.0 (control, 0.1, 0.5, 1.0, 3.0, 5.0 and 10.0 mg/Kg, respectively for 21 days. These hens were artificially inseminated with semen obtained from healthy roosters kept on OTA free feed. Egg production and their quality parameters were recorded. Fertile eggs obtained from each group were set for incubation on weekly basis. At the end of the experiment, hens in each group were killed to determined gross and microscopic lesions in different organs. OTA residue concentrations were determined in extracts of liver, kidneys and breast muscles by immunoaffinity column elution and HPLC-Fluorescent detection techniques. Feeing OTA contaminated diet resulted in a significant decrease in egg mass and egg quality parameters. Liver and kidneys showed characteristic lesions of ochratoxicosis. Residue concentration (ng/g of OTA in the hens fed 10 mg/kg OTA, was the highest in liver (26.336±1.16 followed by kidney (8.223±0.85 and were least in breast muscles (1.235±0.21. Embryonic mortalites were higher, while hatachabilites of the chicks were lower in the groups fed higher doses of OTA. Feeding OTA contaminated diets to breeder hen resulted in residues accumulation in their tissues along with significantly reduced production and breeding performance.

  2. Campylobacter epidemiology from breeders to their progeny in Eastern Spain.

    Science.gov (United States)

    Ingresa-Capaccioni, S; Jiménez-Trigos, E; Marco-Jiménez, F; Catalá, P; Vega, S; Marin, C

    2016-03-01

    While horizontal transmission is a route clearly linked to the spread of Campylobacter at the farm level, few studies support the transmission of Campylobacter spp. from breeder flocks to their offspring. Thus, the present study was carried out to investigate the possibility of vertical transmission. Breeders were monitored from the time of housing day-old chicks, then throughout the laying period (0 to 60 wk) and throughout their progeny (broiler fattening, 1 to 42 d) until slaughter. All samples were analyzed according with official method ISO 10272:2006. Results revealed that on breeder farms, Campylobacter isolation started from wk 16 and reached its peak at wk 26, with 57.0% and 93.2% of positive birds, respectively. After this point, the rate of positive birds decreased slightly to 86.0% at 60 wk. However, in broiler production all day-old chicks were found negative for Campylobacter spp, and the bacteria was first isolated at d 14 of age (5.0%), with a significant increase in detection during the fattening period with 62% of Campylobacter positive animals at the end of the production cycle. Moreover, non-positive sample was determined from environmental sources. These results could be explained because Campylobacter may be in a low concentration or in a non-culturable form, as there were several studies that successfully detected Campylobacter DNA, but failed to culture. This form can survive in the environment and infect successive flocks; consequently, further studies are needed to develop more modern, practical, cost-effective and suitable techniques for routine diagnosis. © 2016 Poultry Science Association Inc.

  3. Selection for early response to photostimulation in broiler breeders.

    Science.gov (United States)

    Tyler, N C; Gous, R M

    2011-08-01

    1. To determine if selection for early response to photostimulation could be successful, 150 male broiler breeders were photostimulated at 8 weeks of age. The first 20 to produce a semen sample and have a reddened comb with an area > 10 cm2 were selected as responders (R) and 20 birds that did not show these signs of sexual development were chosen as non-responders (NR). Once sexually mature, 8 birds from each group that consistently produced a semen sample were mated with both egg-type hybrids and broiler breeder females to observe the response to 8-week photostimulation in the as-hatched offspring. 2. The AFE of the F1 females with NR or R paternity and egg-type hybrid layer maternity (F1L) were similar, but AFE was advanced in birds from R relative to NR paternity when they had broiler breeder maternity (F1B). 3. Date following a normal distribution of AFE were extracted from the overall data set. This group included offspring from both NR and R paternity, but AFE in F1L and F1B females with R paternity was advanced compared to those with NR paternity. 4. Mean testis weights, or age at most rapid testis growth predicted using parameters from Tyler and Gous (2009), of F1 males were not significantly different in birds with NR or R paternity. A strong correlation was found between predicted age at most rapid growth and AFE of full sibs and so it is likely that an advance in AFE in female offspring would also result in an advance in age of testis development of males. 5. There was no significant difference in 21-d body weight of F1B females of NR or R paternity, but the 21-d body weights of F1L females were higher from R than from NR sires, suggesting that although fertility and meat-type traits are often negatively correlated, there was no adverse effect of selection for responsiveness to early photostimulation and broiler growth rates to 21 d. 6. These findings showed that the response to early stimulation is heritable, and should be useful to the broiler breeder

  4. Uterine adenocarcinoma with transcoelomic metastases in breeder hens (Gallus domesticus

    Directory of Open Access Journals (Sweden)

    D. G. Bwala

    2011-04-01

    Full Text Available Hens involved in a Newcastle disease study were euthanased at regular intervals according to a designed protocol. Of these, 7.14%(n = 42 of the 82-week-old specific pathogen-free breeder hens were found to have well-delineated firm white to yellowish nodules of varying sizes in the abdominal cavity. Histologically, the nodules were identified as an adenocarcinoma originating in the uterus. Transcoelomic spread was evidenced by the presence of similar neoplastic cells embedded in the serosa and outer longitudinal muscle layer of the intestines as well as the liver.

  5. REKONFIGURASI JARING DISTRIBUSI TENAGA LISTRIK MENGGUNAKAN BREEDER GENETIC ALGORITHM (BGA

    Directory of Open Access Journals (Sweden)

    Cok. Gede Indra Partha

    2009-05-01

    Full Text Available Kebutuhan akan daya listrik saat ini semakin meningkat, seiring dengan perkembangan teknologi, cara hidup, kebutuhan dan budaya di daerah tersebut. Untuk itu keandalan dan kontinuitas pelayanan, sistem transmisidan distribusi perlu ditingkatkan untuk memperoleh pelayanan yang optimal dengan losses terendah. Padapenelitian ini digunakan metode Breeder Algoritma Genetika (BGA yang telah dikembangkan dalam optimasibeban seimbang untuk rekonfigurasi jaring distribusi tegangan menengah (JTM. Proses optimasi beban dilakukandengan cara merubah switch-switch pada penyulang (sebagai gen-gen dalam kromosom jaring distribusi sehinggadiperoleh jaring distribusi yang paling optimal. Hasil analisis menggunakan BGA menunjukkan konfigurasi baruyang optimal dengan losses terendah serta lebih cepat konvergen jika dibandingkan dengan Genetic Algorithm(GA biasa.

  6. Pebble fabrication of super advanced tritium breeders using a solid solution of Li2+xTiO3+y with Li2ZrO3

    Directory of Open Access Journals (Sweden)

    Tsuyoshi Hoshino

    2016-12-01

    Full Text Available Lithium titanate with excess lithium (Li2+xTiO3+y is one of the most promising candidates among advanced tritium breeders for demonstration power plant reactors because of its good tritium release characteristics. However, the tritium breeding ratio (TBR of Li2+xTiO3+y is smaller than that of e.g., Li2O or Li8TiO6 because of its lower Li density. Therefore, new Li-containing ceramic composites with both high stability and high Li density have been developed. Thus, this study focused on the development of a solid solution with a new characteristic. The solid-solution pebbles of Li2+xTiO3+y with Li2ZrO3 (Li2+x(Ti,ZrO3+y, designated as LTZO, were fabricated by an emulsion method. The X-ray diffraction patterns of sintered LTZO pebbles are approximately the same as those of Li2+xTiO3+y pebbles, and no peaks attributable to Li2ZrO3 are observed. These results demonstrate that LTZO pebbles are not a two-phase material but rather a solid solution. Furthermore, LTZO pebbles were easily sintered under air. Thus, the LTZO solid solution is a candidate breeder material for super advanced (SA tritium breeders.

  7. Engineering development studies for molten-salt breeder reactor processing No. 22

    Energy Technology Data Exchange (ETDEWEB)

    Hightower, J.R. Jr. (comp.)

    1976-06-01

    Processing methods are being developed for use in a close-coupled facility for removing fission products, corrosion products, and fissile materials from the MSBR fuel. This report discusses the autoresistance heating for the continuous fluorinator, the metal transfer experiment, experiments for the salt-metal contactor, and fuel reconstitution. 10 fig. (DLC)

  8. Calculation of a materials relocation experiment simulating a core disruptive accident condition in fast breeder reactors

    Energy Technology Data Exchange (ETDEWEB)

    Sawada, T. [Tokyo Inst. of Tech. (Japan). Research Lab. for Nuclear Reactors; Ninokata, H. [Tokyo Inst. of Tech. (Japan). Research Lab. for Nuclear Reactors; Shimizu, A. [Tokyo Inst. of Tech. (Japan). Research Lab. for Nuclear Reactors

    1995-07-01

    This paper describes an interpretation of the SIMBATH (Simulationsexperimente in Brennelementattrappen mit Thermit) experiments that use the SIMMER-II code. A series of SIMBATH experiments has aimed at simulating fuel pin disintegration and following materials relocation in the test sections of a single pin to 37-pin bundles. In the calculation, three modifications were incorporated into the SIMMER-II code. With these modifications, the calculation showed good agreement with the experimental measurements with respect to the void region propagation in sodium flow and the molten materials relocation leading to flow blockage. A set of parametric calculations has clarified the range of applicability of parameters for materials relocation and flow blockage formation. The particle radius r{sub p} in blockage regions and the mutiplier for particle viscosity (PARVIS) are recommended to be r{sub p}>or{approx}1/2D{sub h} and 0.001Pas

  9. Seismic design technology for breeder reactor structures. Volume 1. Special topics in earthquake ground motion

    Energy Technology Data Exchange (ETDEWEB)

    Reddy, D.P.

    1983-04-01

    This report is divided into twelve chapters: seismic hazard analysis procedures, statistical and probabilistic considerations, vertical ground motion characteristics, vertical ground response spectrum shapes, effects of inclined rock strata on site response, correlation of ground response spectra with intensity, intensity attenuation relationships, peak ground acceleration in the very mean field, statistical analysis of response spectral amplitudes, contributions of body and surface waves, evaluation of ground motion characteristics, and design earthquake motions. (DLC)

  10. Experimental Breeder Reactor II (EBR-II) Fuel-Performance Test Facility (FPTF)

    Energy Technology Data Exchange (ETDEWEB)

    Pardini, J.A.; Brubaker, R.C.; Veith, D.J.; Giorgis, G.C.; Walker, D.E.; Seim, O.S.

    1982-01-01

    The Fuel-Performance Test Facility (FPTF) is the latest in a series of special EBR-II instrumented in-core test facilities. A flow control valve in the facility is programmed to vary the coolant flow, and thus the temperature, in an experimental-irradiation subassembly beneath it and coupled to it. In this way, thermal transients can be simulated in that subassembly without changing the temperatures in surrounding subassemblies. The FPTF also monitors sodium flow and temperature, and detects delayed neutrons in the sodium effluent from the experimental-irradiation subassembly beneath it. This facility also has an acoustical detector (high-temperature microphone) for detecting sodium boiling.

  11. Conceptual Design Studies of a Passively Safe Thorium Breeder Pebble Bed Reactor

    NARCIS (Netherlands)

    Wols, F.J.

    2015-01-01

    Nuclear power plants are expected to play an important role in the worldwide electricity production in the coming decades, since they provide an economically attractive, reliable and low-carbon source of electricity with plenty of resources available for at least the coming hundreds of years.

  12. Feasibility studies for production of {sup 89}Sr in the Fast Breeder Test Reactor (FBTR)

    Energy Technology Data Exchange (ETDEWEB)

    Saha, Debasish; Vithya, J.; Ashok Kumar, G.V.S.; Swaminathan, K.; Kumar, R.; Venkata Subramani, C.R.; Vasudeva Rao, P.R. [Indira Gandhi Centre for Atomic Research (IGCAR), Kalpakkam (India). Fuel Chemistry Div.

    2013-07-01

    {sup 89}Sr, a pure beta emitter with half life of 50.53 d is used as its chloride solution for palliative care of bone metastases. This paper describes the feasibility studies that have been conducted at FBTR, IGCAR for production of this radionuclide using the {sup 89}Y(n, p){sup 89}Sr reaction. Yttria pellets were irradiated in a special subassembly at the core centre for a total of 73 d in two steps of 35 d and 38 d with a time gap of 38 d. The irradiated yttria target was dissolved in nitric acid and the bulk Y was separated by solvent extraction using the TBP-HNO{sub 3} complex. The {sup 89}Sr fraction was purified using the cation exchange resin DOWEX 50W x 8 (100-200 mesh size) from the other radioactive impurities seen. The eluted {sup 89}Sr fraction was assayed using a GM counting system. The {sup 89}Sr activity produced in 1 g of yttria pellet was found to be 19 mCi. (orig.)

  13. Large scale breeder reactor plant prototype mechanical pump conceptual design study

    Energy Technology Data Exchange (ETDEWEB)

    1976-07-01

    This report includes engineering memorandums, drawings, key feature descriptions, and other data. Some of the reports, such as manufacturability and some stress analysis, were done by consultants for Byron Jackson. Review of this report indicates that the design is feasible. The pump can be manufactured to system and specification requirements. The overall length and weight of some pieces will require special consideration, but is within the scope of equipment and technology available today. The fabricated parts are large and heavy, but can be manufactured and machined. Only the high temperature is unique to this size, since previous sodium pumps were smaller. Nondestructive tests as required by the Code are described and are feasible. The performance test of the prototype has been studied thoroughly. It is feasible for a cold water test. There are some problem areas. However, all of them can be solved. Development needs include building and testing a small scale model.

  14. Thermal-performance study of liquid metal fast breeder reactor insulation

    Energy Technology Data Exchange (ETDEWEB)

    Shiu, Kelvin K.

    1980-09-01

    Three types of metallic thermal insulation were investigated analytically and experimentally: multilayer reflective plates, multilayer honeycomb composite, and multilayer screens. Each type was subjected to evacuated and nonevacuated conditions, where thermal measurements were made to determine thermal-physical characteristics. A variation of the separation distance between adjacent reflective plates of multilayer reflective plates and multilayer screen insulation was also experimentally studied to reveal its significance. One configuration of the multilayer screen insulation was further selected to be examined in sodium and sodium oxide environments. The emissivity of Type 304 stainless steel used in comprising the insulation was measured by employing infrared technology. A comprehensive model was developed to describe the different proposed types of thermal insulation. Various modes of heat transfer inherent in each type of insulation were addressed and their relative importance compared. Provision was also made in the model to allow accurate simulation of possible sodium and sodium oxide contamination of the insulation. The thermal-radiation contribution to heat transfer in the temperature range of interest for LMFBR's was found to be moderate, and the suppression of natural convection within the insulation was vital in preserving its insulating properties. Experimental data were compared with the model and other published results. Moreover, the three proposed test samples were assessed and compared under various conditions as viable LMFBR thermal insulations.

  15. Gas cooled fast breeder reactor design for a circulator test facility (modified HTGR circulator test facility)

    Energy Technology Data Exchange (ETDEWEB)

    1979-10-01

    A GCFR helium circulator test facility sized for full design conditions is proposed for meeting the above requirements. The circulator will be mounted in a large vessel containing high pressure helium which will permit testing at the same power, speed, pressure, temperature and flow conditions intended in the demonstration plant. The electric drive motor for the circulator will obtain its power from an electric supply and distribution system in which electric power will be taken from a local utility. The conceptual design decribed in this report is the result of close interaction between the General Atomic Company (GA), designer of the GCFR, and The Ralph M. Parson Company, architect/engineer for the test facility. A realistic estimate of total project cost is presented, together with a schedule for design, procurement, construction, and inspection.

  16. Present status and trend of development of operation and maintenance techniques of fast breeder reactors

    Energy Technology Data Exchange (ETDEWEB)

    Ozawa, Kenji; Yamashita, Yoshioki; Sunaoshi, Hiroshi

    1987-10-01

    Recently, accompanying the conspicuous improvement of the reliability and economical efficiency of LWRs, the level of attaining the high order technology required for FBRs has become high. The largest subject of FBRs is to heighten the economical efficiency while ensuring the safety, and many technical developments such as the heightening of the performance of FBR fuel, the shortening of pipings, the omission of secondary system and the rationalization of containment vessels have been carried out. Also the improvement of the capacity factor including the shortening of regular inspection period is important in addition to the safe and stable operation of FBRs, and it is necessary to upgrade the operation and maintenance techniques. The features of the operation and maintenance techniques of FBRs, the concept of the protection with deep strata in the operation techniques, the upgrading of the operation procedure at the time of abnormality, the development of operation-assisting systems, the upgrading of the education and training on operation, the shortening of regular inspection period, the techniques for reducing radiation exposure, the elucidation of the behavior of corrosion products, the international cooperation and others are described. (Kako, I.).

  17. An axially multilayered low void worth liquid-metal fast breeder reactor core concept

    Energy Technology Data Exchange (ETDEWEB)

    Kamei, T.; Yamaoka, M. (Toshiba Corp., Nuclear Engineering Lab., 4-1 Ukishima-cho, Kawasaki-ku, Kawasaki-shi 210 (JP))

    1992-03-01

    A new core concept with a negative sodium void reactivity coefficient has evolved. The core is composed of two core layers in the axial direction. The core layers are separated by an internal blanket, the central region of which comprises a neutron-absorbing material such as boron carbide or tantalum. Consequently, the two core layers are completely decoupled as regards neutronics, leading to an effective increase in neutron leakage from the core region when sodium is voided. This design is expected to be free from the disadvantages of a large core radius, as seen in a conventional spoiled core such as a pancake core. In this paper the design is described in detail, and its application to a 300-MW (electronic) metal fuel core and to a 450-MW (electric) minor actinide burned core is given as an example.

  18. REACTOR COOLING

    Science.gov (United States)

    Quackenbush, C.F.

    1959-09-29

    A nuclear reactor with provisions for selectively cooling the fuel elements is described. The reactor has a plurality of tubes extending throughout. Cylindrical fuel elements are disposed within the tubes and the coolant flows through the tubes and around the fuel elements. The fuel elements within the central portion of the reactor are provided with roughened surfaces of material. The fuel elements in the end portions of the tubes within the reactor are provlded with low conduction jackets and the fuel elements in the region between the central portion and the end portions are provided with smooth surfaces of high heat conduction material.

  19. Reactor core stability monitoring method for BWR type reactor

    Energy Technology Data Exchange (ETDEWEB)

    Kanemoto, Shigeru; Ebata, Shigeo.

    1992-09-01

    In an operation for a BWR type reactor, reactor power is usually increased or decreased by controlling both of control rods and reactor core flow rate. Under a certain condition, the reactor core is made unstable by the coupling of nuclear and thermohydrodynamic characteristics in the reactor. Therefore, the reactor power and the reactor core flow rate are changed within a range predetermined by a design calculation. However, if reactor core stability can be always measured and monitored, it is useful for safe operation, as well as an existent operation range can be extended to enable more effective operation. That is, autoregressive a coefficient is determined successively on real time based on fluctuation components of neutron flux signals. Based on the result, an amplification ratio, as a typical measure of the reactor core stability, is determined on a real time. A time constant of the successive calculation for the autoregressive coefficient can be made variable by the amplification ratio. Then, the amplification ratio is estimated at a constant accuracy. With such procedures, the reactor core stability can be monitored successively in an ON-line manner at a high accuracy, thereby enabling to improve the operation performance. (I.S.).

  20. Heat-pipe thermionic reactor concept

    DEFF Research Database (Denmark)

    Storm Pedersen, E.

    1967-01-01

    Main components are reactor core, heat pipe, thermionic converter, secondary cooling system, and waste heat radiator; thermal power generated in reactor core is transported by heat pipes to thermionic converters located outside reactor core behind radiation shield; thermionic emitters are in direct...

  1. Radiation Shielding for Fusion Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Santoro, R.T.

    1999-10-01

    Radiation shielding requirements for fusion reactors present different problems than those for fission reactors and accelerators. Fusion devices, particularly tokamak reactors, are complicated by geometry constraints that complicate disposition of fully effective shielding. This paper reviews some of these shielding issues and suggested solutions for optimizing the machine and biological shielding. Radiation transport calculations are essential for predicting and confirming the nuclear performance of the reactor and, as such, must be an essential part of the reactor design process. Development and optimization of reactor components from the first wall and primary shielding to the penetrations and containment shielding must be carried out in a sensible progression. Initial results from one-dimensional transport calculations are used for scoping studies and are followed by detailed two- and three-dimensional analyses to effectively characterize the overall radiation environment. These detail model calculations are essential for accounting for the radiation leakage through ports and other penetrations in the bulk shield. Careful analysis of component activation and radiation damage is cardinal for defining remote handling requirements, in-situ replacement of components, and personnel access at specific locations inside the reactor containment vessel. Radiation shielding requirements for fusion reactors present different problems than those for fission reactors and accelerators. Fusion devices, particularly tokamak reactors, are complicated by geometry constraints that complicate disposition of fully effective shielding. This paper reviews some of these shielding issues and suggested solutions for optimizing the machine and biological shielding. Radiation transport calculations are essential for predicting and confirming the nuclear performance of the reactor and, as such, must be an essential part of the reactor design process. Development and optimization of reactor

  2. Study on in-vessel thermohydraulics phenomena of sodium-cooled fast reactors. 3. Numerical investigation for thermal stratification phenomena in the upper plenum

    Energy Technology Data Exchange (ETDEWEB)

    Muramatsu, Toshiharu; Yamaguchi, Akira [Japan Nuclear Cycle Development Inst., Oarai, Ibaraki (Japan). Oarai Engineering Center; Wakita, Junichi [Customer System Co. Ltd. (Japan)

    2002-06-01

    A large-scale sodium-cooled fast breeder reactor in the feasibility studies on commercialized fast reactors has a feature of consideration of thorough simplified and compacted systems and components design to realize drastic economical improvements. Therefore, special attentions should be paid to thermohydraulic designs for gas entrainment behavior from free surface, flow-induced vibration of in-vessel components, thermal stratification in the plenum, thermal shock for various structures due to high-speed coolant flows, nonsymmetrical coolant flows, etc. in the reactor vessel. In-vessel thermohydraulic analyses were carried out using a multi-dimensional code AQUA to understand the thermal stratification characteristics in the upper plenum, and to investigate trade-off relations between gas entrainment and thermal stratification phenomena on in-vessel structures for the elimination of gas entrainment possibility. From the analysis, the following results were obtained. (1) Dummy plug insertion to a slit of the upper core structure is one of the effective measures to stabilize the in-vessel flow patterns and to mitigate in-vessel thermal shocks. (2) Though flow guide device such as a baffle ring attached to reactor vessel wall is an effective measure to eliminate impinging jet to dipped plate, rising characteristics of the thermal stratification interface are affected by the baffle ring devise. (3) Thermal stratification characteristics are not influenced very much by the installation of a partial inner barrel to the dipped plate, which is an effective measure to reduce the horizontal flow velocity components at free surface. (4) Labyrinth structures to the gap between the reactor vessel wall and the outer dipped plate have direct effects upon in-vessel thermal shock characteristics including thermal stratification phenomena due to the closing of flow path between the upper plenum and the free surface plenum. (author)

  3. Nuclear component horizontal seismic restraint

    Science.gov (United States)

    Snyder, Glenn J.

    1988-01-01

    A nuclear component horizontal seismic restraint. Small gaps limit horizontal displacement of components during a seismic occurrence and therefore reduce dynamic loadings on the free lower end. The reactor vessel and reactor guard vessel use thicker section roll-forged rings welded between the vessel straight shell sections and the bottom hemispherical head sections. The inside of the reactor guard vessel ring forging contains local vertical dovetail slots and upper ledge pockets to mount and retain field fitted and installed blocks. As an option, the horizontal displacement of the reactor vessel core support cone can be limited by including shop fitted/installed local blocks in opposing alignment with the reactor vessel forged ring. Beams embedded in the wall of the reactor building protrude into apertures in the thermal insulation shell adjacent the reactor guard vessel ring and have motion limit blocks attached thereto to provide to a predetermined clearance between the blocks and reactor guard vessel ring.

  4. ALGERIAN SHEEP ARE NONSEASONAL BREEDERS: "CLINICAL, CYTOLOGICAL AND HISTOLOGICAL STUDIES"

    Directory of Open Access Journals (Sweden)

    A NIAR

    2001-12-01

    Full Text Available 4377 pregnant ewes have been used in this study to realise a curve of lambing. This curve prove that the three most important breeds of Algerian sheep can breed all year round.                 To prove also that Algerian sheep are no  seasonal breeder, a cytological and histological study of ewes vaginal mucosa have been done. The exfoliative cytology over all the phases of the oestrous cycle and pregnancy consistent in appearance and appear to be influenced directly by the changes in endogenous ovarian steroid hormones. The histological features of the anterior vaginal epithelium of the ewe sampled all year round, before, during, after oestrus and at pregnancy are described. In the present study, we have never found an arrest of the cyclical genital activity of ewes at any moment of the year. This finding agree with results of the curve of lambing. We can conclude that Algerian ewes are nonseasonal breeders.

  5. Humans are not cooperative breeders but practice biocultural reproduction.

    Science.gov (United States)

    Bogin, Barry; Bragg, Jared; Kuzawa, Christopher

    2014-01-01

    Alloparental care and feeding of young is often called "cooperative breeding" and humans are increasingly described as being a cooperative breeding species. To critically evaluate whether the human offspring care system is best grouped with that of other cooperative breeders. (1) Review of the human system of offspring care in the light of definitions of cooperative, communal and social breeding; (2) re-analysis of human lifetime reproductive effort. Human reproduction and offspring care are distinct from other species because alloparental behaviour is defined culturally rather than by genetic kinship alone. This system allows local flexibility in provisioning strategies and ensures that care and resources often flow between unrelated individuals. This review proposes the term "biocultural reproduction" to describe this unique human reproductive system. In a re-analysis of human life history data, it is estimated that the intense alloparenting typical of human societies lowers the lifetime reproductive effort of individual women by 14-29% compared to expectations based upon other mammals. Humans are not cooperative breeders as classically defined; one effect of the unique strategy of human biocultural reproduction is a lowering of human lifetime reproductive effort, which could help explain lifespan extension.

  6. Nuclear reactor for breeding U.sup.233

    Science.gov (United States)

    Bohanan, Charles S.; Jones, David H.; Raab, Jr., Harry F.; Radkowsky, Alvin

    1976-01-01

    A light-water-cooled nuclear reactor capable of breeding U.sup.233 for use in a light-water breeder reactor includes physically separated regions containing U.sup.235 fissile material and U.sup.238 fertile material and Th.sup.232 fertile material and Pu.sup.239 fissile material, if available. Preferably the U.sup.235 fissile material and U.sup.238 fertile material are contained in longitudinally movable seed regions and the Pu.sup.239 fissile material and Th.sup.232 fertile material are contained in blanket regions surrounding the seed regions.

  7. Multifunctional reactors

    NARCIS (Netherlands)

    Westerterp, K.R.

    1992-01-01

    Multifunctional reactors are single pieces of equipment in which, besides the reaction, other functions are carried out simultaneously. The other functions can be a heat, mass or momentum transfer operation and even another reaction. Multifunctional reactors are not new, but they have received much

  8. High gamma-rays irradiation tests of critical components for ITER (International Thermonuclear Experimental Reactor) in-vessel remote handling system

    Energy Technology Data Exchange (ETDEWEB)

    Obara, Kenjiro; Kakudate, Satoshi; Oka, Kiyoshi [Department of Fusion Engineering Research, Naka Fusion Research Establishment, Japan Atomic Energy Research Institute, Naka, Ibaraki (Japan)] [and others

    1999-02-01

    In ITER, the in-vessel remote handling is inevitably required to assemble and maintain the activated in-vessel components due to deuterium and tritium operation. Since the in-vessel remote handling system has to be operated under the intense of gamma ray irradiation, the components of the remote handling system are required to have radiation hardness so as to allow maintenance operation for a sufficient length of time under the ITER in-vessel environments. For this, the Japan, European and Russian Home Teams have extensively conducted gamma ray irradiation tests and quality improvements including optimization of material composition through ITER R and D program in order to develop radiation hard components which satisfy the doses from 10 MGy to 100 MGy at a dose rate of 1 x 10{sup 6} R/h (ITER R and D Task: T252). This report describes the latest status of radiation hard component development which has been conducted by the Japan Home Team in the ITER R and D program. The number of remote handling components tested is about seventy and these are categorized into robotics (Subtask 1), viewing system (Subtask 2) and common components (Subtask 3). The irradiation tests, including commercial base products for screening, modified products and newly developed products to improve the radiation hardness, were carried out using the gamma ray irradiation cells in Takasaki Establishment, JAERI. As a result, the development of the radiation hard components which can be tolerable for high temperature and gamma radiation has been well progressed, and many components, such as AC servo motor with ceramics insulated wire, optical periscope and CCD camera, have been newly developed. (author)

  9. Effects of breeder age, strain, and eggshell temperature on nutrient metabolism of broiler embryos

    NARCIS (Netherlands)

    Nangsuay, A.; Meijerhof, R.; Anker-Hensen, van den I.; Heetkamp, M.J.W.; Kemp, B.; Brand, van den H.

    2017-01-01

    Breeder age and broiler strain influence the availability of nutrients and oxygen through yolk size and eggshell conductance, and the effects of these egg characteristics on nutrient metabolism might be influenced by eggshell temperature (EST). This study aims to determine effects of breeder age,

  10. Egg fertility and hatchability in Avians broiler-breeder hens under ...

    African Journals Online (AJOL)

    Impact of temperature and humidity in different month of lay was evaluated on fertility and hatchability in broiler breeder hens reared in Sapele, Nigeria. Six million, six hundred and nineteen thousand, seven hundred and forty six eggs from flocks of Avians broiler-breeder hens reared between 2005 and 2006 in a farm ...

  11. Reactor Materials Research

    Energy Technology Data Exchange (ETDEWEB)

    Van Walle, E

    2002-04-01

    The activities of SCK-CEN's Reactor Materials Research Department for 2001 are summarised. The objectives of the department are: (1) to evaluate the integrity and behaviour of structural materials used in nuclear power industry; (2) to conduct research to unravel and understand the parameters that determine the material behaviour under or after irradiation; (3) to contribute to the interpretation, the modelling of the material behaviour and to develop and assess strategies for optimum life management of nuclear power plant components. The programmes within the department are focussed on studies concerning (1) Irradiation Assisted Stress Corrosion Cracking (IASCC); (2) nuclear fuel; and (3) Reactor Pressure Vessel Steel.

  12. Neutron radiation embrittlement studies in support of continued operation, and validation by sampling of Magnox reactor steel pressure vessels and components

    Energy Technology Data Exchange (ETDEWEB)

    Jones, R.B.; Bolton, C.J. [Magnox Electric plc, Berkeley Centre, Glos (United Kingdom)

    1997-02-01

    Magnox steel reactor pressure vessels differ significantly from US LWR vessels in terms of the type of steel used, as well as their operating environment (dose level, exposure temperature range, and neutron spectra). The large diameter ferritic steel vessels are constructed from C-Mn steel plates and forgings joined together with manual metal and submerged-arc welds which are stress-relieved. All Magnox vessels are now at least thirty years old and their continued operation is being vigorously pursued. Vessel surveillance and other programmes are summarized which support this objective. The current understanding of the roles of matrix irradiation damage, irradiation-enhanced copper impurity precipitation and intergranular embrittlement effects is described in so far as these influence the form of the embrittlement and hardening trend curves for each material. An update is given on the influence of high temperature exposure, and on the role of differing neutron spectra. Finally, the validation offered by the results of an initial vessel sampling exercise is summarized together with the objectives of a more extensive future sampling programme.

  13. Design concept of conducting shell and in-vessel components suitable for plasma vertical stability and remote maintenance scheme in DEMO reactor

    Energy Technology Data Exchange (ETDEWEB)

    Utoh, Hiroyasu, E-mail: uto.hiroyasu@jaea.go.jp [Japan Atomic Energy Agency, Obuchi, Rokkasho-mura, Aomori-ken 039-3212 (Japan); International Fusion Energy Research Centre, 2-166, Obuchi, Rokkasho, Aomori 039-3212 (Japan); Takase, Haruhiko [Japan Atomic Energy Agency, Obuchi, Rokkasho-mura, Aomori-ken 039-3212 (Japan); International Fusion Energy Research Centre, 2-166, Obuchi, Rokkasho, Aomori 039-3212 (Japan); Sakamoto, Yoshiteru; Tobita, Kenji [Japan Atomic Energy Agency, Obuchi, Rokkasho-mura, Aomori-ken 039-3212 (Japan); Mori, Kazuo; Kudo, Tatsuya [Japan Atomic Energy Agency, Obuchi, Rokkasho-mura, Aomori-ken 039-3212 (Japan); International Fusion Energy Research Centre, 2-166, Obuchi, Rokkasho, Aomori 039-3212 (Japan); Someya, Youji; Asakura, Nobuyuki; Hoshino, Kazuo; Nakamura, Makoto; Tokunaga, Shinsuke [Japan Atomic Energy Agency, Obuchi, Rokkasho-mura, Aomori-ken 039-3212 (Japan)

    2016-02-15

    Highlights: • Conceptual design of in-vessel component including conducting shell has been investigated. • The conducting shell design for plasma vertical stability was clarified from the plasma vertical stability analysis. • The calculation results showed that the double-loop shell has the most effect on plasma vertical stability. - Abstract: In order to realize a feasible DEMO, we designed an in-vessel component including the conducting shell. The project is affiliated with the broader approach DEMO design activities and is conceptualized from a plasma vertical stability and engineering viewpoint. The dependence of the plasma vertical stability on the conducing shell parameters and the electromagnetic force at plasma disruption were investigated in numerical simulations (programmed in the 3D eddy current analysis code and a plasma position control code). The simulations assumed the actual shape and position of the vacuum vessel and in-vessel components. The plasma vertical stability was most effectively maintained by the double-loop shell.

  14. ACDOS1: a computer code to calculate dose rates from neutron activation of neutral beamlines and other fusion-reactor components

    Energy Technology Data Exchange (ETDEWEB)

    Keney, G.S.

    1981-08-01

    A computer code has been written to calculate neutron induced activation of neutral-beam injector components and the corresponding dose rates as a function of geometry, component composition, and time after shutdown. The code, ACDOS1, was written in FORTRAN IV to calculate both activity and dose rates for up to 30 target nuclides and 50 neutron groups. Sufficient versatility has also been incorporated into the code to make it applicable to a variety of general activation problems due to neutrons of energy less than 20 MeV.

  15. Impacts of breeder loss on social structure, reproduction and population growth in a social canid.

    Science.gov (United States)

    Borg, Bridget L; Brainerd, Scott M; Meier, Thomas J; Prugh, Laura R

    2015-01-01

    The importance of individuals to the dynamics of populations may depend on reproductive status, especially for species with complex social structure. Loss of reproductive individuals in socially complex species could disproportionately affect population dynamics by destabilizing social structure and reducing population growth. Alternatively, compensatory mechanisms such as rapid replacement of breeders may result in little disruption. The impact of breeder loss on the population dynamics of social species remains poorly understood. We evaluated the effect of breeder loss on social stability, recruitment and population growth of grey wolves (Canis lupus) in Denali National Park and Preserve, Alaska using a 26-year dataset of 387 radiocollared wolves. Harvest of breeding wolves is a highly contentious conservation and management issue worldwide, with unknown population-level consequences. Breeder loss preceded 77% of cases (n = 53) of pack dissolution from 1986 to 2012. Packs were more likely to dissolve if a female or both breeders were lost and pack size was small. Harvest of breeders increased the probability of pack dissolution, likely because the timing of harvest coincided with the breeding season of wolves. Rates of denning and successful recruitment were uniformly high for packs that did not experience breeder loss; however, packs that lost breeders exhibited lower denning and recruitment rates. Breeder mortality and pack dissolution had no significant effects on immediate or longer term population dynamics. Our results indicate the importance of breeding individuals is context dependent. The impact of breeder loss on social group persistence, reproduction and population growth may be greatest when average group sizes are small and mortality occurs during the breeding season. This study highlights the importance of reproductive individuals in maintaining group cohesion in social species, but at the population level socially complex species may be resilient

  16. Effects of breeder turnover and harvest on group composition and recruitment in a social carnivore

    Science.gov (United States)

    Ausband, David E.; Mitchell, Michael S.; Waits, Lisette P.

    2017-01-01

    Breeder turnover can influence population growth in social carnivores through changes to group size, composition and recruitment.Studies that possess detailed group composition data that can provide insights about the effects of breeder turnover on groups have generally been conducted on species that are not subject to recurrent annual human harvest. We wanted to know how breeder turnover affects group composition and how harvest, in turn, affects breeder turnover in cooperatively breeding grey wolves (Canis lupus Linnaeus 1758).We used noninvasive genetic sampling at wolf rendezvous sites to construct pedigrees and estimate recruitment in groups of wolves before and after harvest in Idaho, USA.Turnover of breeding females increased polygamy and potential recruits per group by providing breeding opportunities for subordinates although resultant group size was unaffected 1 year after the turnover. Breeder turnover had no effect on the number of nonbreeding helpers per group. After breeding male turnover, fewer female pups were recruited in the new males’ litters. Harvest had no effect on the frequency of breeder turnover.We found that breeder turnover led to shifts in the reproductive hierarchies within groups and the resulting changes to group composition were quite variable and depended on the sex of the breeder lost. We hypothesize that nonbreeding females direct help away from non-kin female pups to preserve future breeding opportunities for themselves. Breeder turnover had marked effects on the breeding opportunities of subordinates and the number and sex ratios of subsequent litters of pups. Seemingly subtle changes to groups, such as the loss of one individual, can greatly affect group composition, genetic content, and short-term population growth when the individual lost is a breeder.

  17. Effects of breeder turnover and harvest on group composition and recruitment in a social carnivore.

    Science.gov (United States)

    Ausband, David E; Mitchell, Michael S; Waits, Lisette P

    2017-09-01

    Breeder turnover can influence population growth in social carnivores through changes to group size, composition and recruitment. Studies that possess detailed group composition data that can provide insights about the effects of breeder turnover on groups have generally been conducted on species that are not subject to recurrent annual human harvest. We wanted to know how breeder turnover affects group composition and how harvest, in turn, affects breeder turnover in cooperatively breeding grey wolves (Canis lupus Linnaeus 1758). We used noninvasive genetic sampling at wolf rendezvous sites to construct pedigrees and estimate recruitment in groups of wolves before and after harvest in Idaho, USA. Turnover of breeding females increased polygamy and potential recruits per group by providing breeding opportunities for subordinates although resultant group size was unaffected 1 year after the turnover. Breeder turnover had no effect on the number of nonbreeding helpers per group. After breeding male turnover, fewer female pups were recruited in the new males' litters. Harvest had no effect on the frequency of breeder turnover. We found that breeder turnover led to shifts in the reproductive hierarchies within groups and the resulting changes to group composition were quite variable and depended on the sex of the breeder lost. We hypothesize that nonbreeding females direct help away from non-kin female pups to preserve future breeding opportunities for themselves. Breeder turnover had marked effects on the breeding opportunities of subordinates and the number and sex ratios of subsequent litters of pups. Seemingly subtle changes to groups, such as the loss of one individual, can greatly affect group composition, genetic content, and short-term population growth when the individual lost is a breeder. © 2017 The Authors. Journal of Animal Ecology © 2017 British Ecological Society.

  18. Design study of an upgraded charge breeder for ISOLDE

    CERN Document Server

    Shornikov, A; Wenander, F; Pikin, A

    2013-01-01

    In this work we present our progress in the design study of a new Electron Beam Ion Source (EBIS) to be installed as a charge breeder for reacceleration of rare ions at ISOLDE. The work is triggered by the HIE-ISOLDE upgrade {[}1] and the planned TSR@ISOLDE project {[}2]. To fulfill the requests of the user community the new EBIS should reach an electron beam density of 10(4) A/cm(2) at electron energies up to 150 key and, provide UHV environment and ion cooling in the breeding region to ensure confinement of the ions long enough to reach the requested charge states. We report on the established design parameters and first prototyping steps towards production and testing of suitable equipment. (C) 2013 Elsevier B.V. All rights reserved.

  19. Radiocesium in reindeer breeders in Northern Norway since 1965

    Energy Technology Data Exchange (ETDEWEB)

    Selnaes, T.D. [Institutt for Energiteknikk, Kjeller (Norway); Strand, P. [Statens Straalevern, Oesteraas (Norway)

    1995-12-31

    Reindeer breeders in Kautokeino, Northern Norway, have been monitored for whole body content of {sup 137}Cs every years since 1965. The group was chosen because of it`s large intake of reindeer meat (65 kg/year). The same group has been monitored throughout the years. Some supplements have been made, to maintain the average age within the group. Whole body countings have been performed with a scintillation detector and i single- or multichannel analyzer. The highest values were monitored in 1966, when the average body content of {sup 137}Cs was 39,500 Bq for men, and 18,600 Bq for women. Whole body contents are today around 2,000 Bq, giving a calculated whole body dose of 0.1 mSv/year. 5 refs., 4 figs.

  20. Relationship between ecological concepts and biosafety in broiler breeder farms

    Directory of Open Access Journals (Sweden)

    CA Santos

    2007-09-01

    Full Text Available The entrance of poultry products into the trade world requires changes in the configuration of these products, such as programs that ensure their quality and biosafety for the consumers. This article aims at presenting new perception on poultry biosafety programs in broiler breeder farms from an ecological perspective, making these programs more efficient and cost-effective, i.e., more competitive. Using literature review, some convergences were found between ecology concepts and biosafety programs. One of these convergences is understanding the farm as an open ecosystem, integrating through adaptation the natural environment with the exotic environment. This also allows understanding how the production area interacts with the environment as to energy substrate input and output or as to the dissemination of poultry pathogens by vectors outside the farm or from the production area to the environment. This allows building a theoretical reference for further studies on ecological models for the improvement of poultry biosafety programs.

  1. BRENDA: a dynamic simulator for a sodium-cooled fast reactor power plant

    Energy Technology Data Exchange (ETDEWEB)

    Hetrick, D.L.; Sowers, G.W.

    1978-06-01

    This report is a users' manual for one version of BRENDA (Breeder Reactor Nuclear Dynamic Analysis), which is a digital program for simulating the dynamic behavior of a sodium-cooled fast reactor power plant. This version, which contains 57 differential equations, represents a simplified model of the Clinch River Breeder Reactor Project (CRBRP). BRENDA is an input deck for DARE P (Differential Analyzer Replacement, Portable), which is a continuous-system simulation language developed at the University of Arizona. This report contains brief descriptions of DARE P and BRENDA, instructions for using BRENDA in conjunction with DARE P, and some sample output. A list of variable names and a listing for BRENDA are included as appendices.

  2. Induction of eggshell apex abnormalities in broiler breeder hens.

    Science.gov (United States)

    Feberwee, A; Landman, W J M

    2010-04-01

    Recently, the causal relationship between eggshell apex abnormalities (EAA) and Mycoplasma synoviae was described. This eggshell pathology has only been documented in table egg layers both spontaneously and experimentally infected with M. synoviae, suggesting that meat-type layers are less prone to this condition. In this study the susceptibility of specified pathogen free (SPF) broiler breeder hens to produce eggs with EAA after M. synoviae infection was assessed. Five groups of 12 hens each were made: a negative control group, a group inoculated intratracheally (i.t.) with a M. synoviae EAA strain at 19 weeks of age, a group inoculated i.t. with this strain at 19 and 26 weeks of age, a group inoculated with M. synoviae i.t. at 19 weeks of age and infected 5 days earlier with infectious bronchitis virus D1466 (IBV), and a fifth group similar to the former but inoculated i.t. twice with an M. synoviae EAA strain at 19 and 26 weeks of age. Eggs with EAA were only produced after a single i.t. inoculation with the M. synoviae EAA strain if preceded by an infection with IBV. The production of eggs with EAA started 6 weeks after M. synoviae EAA inoculation and the proportion of eggs with EAA during the experiment was 9/449 (2%), which was much lower than that in SPF layer hens (14-22%). The present results suggest that broiler breeder hens are less susceptible to producing eggs with EAA after an infection with a M. synoviae EAA strain preceded by an IBV infection, compared with table egg layers. Similar to SPF egg layers, the mean daily egg production per hen was significantly reduced by the M. synoviae EAA strain and there was a general negative effect on eggshell strength by this strain, suggesting it could also have a detrimental effect on hatching egg quality.

  3. The Effect of Low-Density Broiler Breeder Diets on Performance and Immune Status of their Offspring

    NARCIS (Netherlands)

    Enting, H.; Boersma, W.J.A.; Cornelissen, J.B.W.J.; Winden, van S.C.L.; Verstegen, M.W.A.; Aar, van de P.J.

    2007-01-01

    Effects of low-density broiler breeder diets on offspring performance and mortality were studied using 2,100 female and 210 male Cobb 500 breeders. Breeder treatments involved 4 experimental groups and a control group with normal density diets (ND, 2,600 kcal of AME/kg during rearing and 2,800 kcal

  4. NUCLEAR REACTOR

    Science.gov (United States)

    Miller, H.I.; Smith, R.C.

    1958-01-21

    This patent relates to nuclear reactors of the type which use a liquid fuel, such as a solution of uranyl sulfate in ordinary water which acts as the moderator. The reactor is comprised of a spherical vessel having a diameter of about 12 inches substantially surrounded by a reflector of beryllium oxide. Conventionnl control rods and safety rods are operated in slots in the reflector outside the vessel to control the operation of the reactor. An additional means for increasing the safety factor of the reactor by raising the ratio of delayed neutrons to prompt neutrons, is provided and consists of a soluble sulfate salt of beryllium dissolved in the liquid fuel in the proper proportion to obtain the result desired.

  5. The effect of γ-radiation in Li{sub 4}SiO{sub 4} ceramic breeder blankets

    Energy Technology Data Exchange (ETDEWEB)

    Carella, E., E-mail: elisabetta.carella@externos.ciemat.es [UNED Foundation, C/Francisco de Rojas, 2, 28010 Madrid (Spain); National Fusion Laboratory, CIEMAT, Av. Complutense 40, 28040 Madrid (Spain); Hernández, T. [National Fusion Laboratory, CIEMAT, Av. Complutense 40, 28040 Madrid (Spain)

    2015-01-15

    Highlights: • Li{sub 4}SiO{sub 4} is γ-irradiated with different doses (5, 10 and 13 MGy) and its electrical bulk conductivity measured by EIS. • The electrical measurements are compared with SiO{sub 2} confirming the charge carrier role of Li{sup +} under thermal activation. • The recombination effect of temperature during irradiation has been observed. - Abstract: Lithium orthosilicate (Li{sub 4}SiO{sub 4}) is considered one of the best candidates for the solid breeder blanket system (BBs) of future thermonuclear reactors. During reactor operation it will be bombarded by neutrons and gamma radiation which may alter its composition and properties, affecting its shielding role. The electrochemical impedance spectroscopy (EIS) is here used as a non-destructive tool for monitoring the electrical bulk conductivity of Li{sub 4}SiO{sub 4} ceramic after different ionizing damaging treatments. The compound fabricated in our laboratories, was irradiated by a {sup 60}Co in the Nayade-facility (CIEMAT-Spain). Several studies with slight experimental variations were realized and here presented to understand the dynamic of the charge carriers’ movement and the role of intrinsic and extrinsic defects on the electrical properties of this candidate ceramic.

  6. NUCLEAR REACTOR

    Science.gov (United States)

    Grebe, J.J.

    1959-07-14

    High temperature reactors which are uniquely adapted to serve as the heat source for nuclear pcwered rockets are described. The reactor is comprised essentially of an outer tubular heat resistant casing which provides the main coolant passageway to and away from the reactor core within the casing and in which the working fluid is preferably hydrogen or helium gas which is permitted to vaporize from a liquid storage tank. The reactor core has a generally spherical shape formed entirely of an active material comprised of fissile material and a moderator material which serves as a diluent. The active material is fabricated as a gas permeable porous material and is interlaced in a random manner with very small inter-connecting bores or capillary tubes through which the coolant gas may flow. The entire reactor is divided into successive sections along the direction of the temperature gradient or coolant flow, each section utilizing materials of construction which are most advantageous from a nuclear standpoint and which at the same time can withstand the operating temperature of that particular zone. This design results in a nuclear reactor characterized simultaneously by a minimum critiral size and mass and by the ability to heat a working fluid to an extremely high temperature.

  7. Studies of reactor irradiation effect on hydrogen isotope release from vanadium alloy V4Cr4Ti

    Energy Technology Data Exchange (ETDEWEB)

    Kulsartov, T. [Kazakhstan State University, Tole-bi-str. 96a., Almaty (Kazakhstan); Shestakov, V. [Kazakhstan State University, Tole-bi-str. 96a., Almaty (Kazakhstan); Chikhray, Y. [Kazakhstan State University, Tole-bi-str. 96a., Almaty (Kazakhstan); Kenzhin, Y. [Institute of Atomic Energy NNC RK, Krasnoarmeyskaya-str. 10, Kurchatov (Kazakhstan); Kolbayenkov, A. [Institute of Atomic Energy NNC RK, Krasnoarmeyskaya-str. 10, Kurchatov (Kazakhstan); Tazhibayeva, I. [National Nuclear Center, Lenin-str. 6, Kurchatov (Kazakhstan)

    2007-08-01

    Vanadium alloys are most promising materials being considered for lithium blanket-breeder in future fusion reactors. The primary reason for these stems from good combination of physical-mechanical and radiation properties of vanadium alloys. In operational conditions of fusion reactors the very important issue is behavior of vanadium alloy with respect to hydrogen isotopes under neutron and gamma irradiation. This paper shows results of the experimental studies of reactor irradiation influence on parameters of hydrogen release from vanadium alloys. Experiments were carried out for various levels of reactor irradiation and showed the effect of irradiation on parameters of hydrogen release from vanadium alloy V4Cr4Ti.

  8. Nuclear reactor sealing system

    Science.gov (United States)

    McEdwards, James A.

    1983-01-01

    A liquid metal-cooled nuclear reactor sealing system. The nuclear reactor includes a vessel sealed at its upper end by a closure head. The closure head comprises at least two components, one of which is rotatable; and the two components define an annulus therebetween. The sealing system includes at least a first and second inflatable seal disposed in series in an upper portion of the annulus. The system further includes a dip seal extending into a body of insulation located adjacent a bottom portion of the closure head. The dip seal comprises a trough formed by a lower portion of one of the components, and a seal blade pendently supported from the other component and extending downwardly into the trough. A body of liquid metal is contained in the trough which submerges a portion of the seal blade. The seal blade is provided with at least one aperture located above the body of liquid metal for providing fluid communication between the annulus intermediate the dip seal and the inflatable seals, and a body of cover gas located inside the vessel. There also is provided means for introducing a purge gas into the annulus intermediate the inflatable seals and the seal blade. The purge gas is introduced in an amount sufficient to substantially reduce diffusion of radioactive cover gas or sodium vapor up to the inflatable seals. The purge gas mixes with the cover gas in the reactor vessel where it can be withdrawn from the vessel for treatment and recycle to the vessel.

  9. Improved Performance of Broilers and Broiler Breeders Associated with an Amended Vaccination Program Against Reovirosis.

    Science.gov (United States)

    De Herdt, Peter; Broeckx, Marlies; Van Driessche, Filip; Vermeiren, Bart; Van Den Abeele, Geert; Van Gorp, Stefaan

    2016-12-01

    A vertically integrated monitoring program was set up for breeders hatched in 2013 and their offspring to detect differences in performance related to the reovirus vaccination schedule. Within the same organization in Belgium, 17 breeder flocks were vaccinated with one dose of live and one dose of inactivated reovirus vaccine, while 14 flocks received two doses of inactivated vaccine without live priming. The hatchability of the eggs produced by these birds was examined. Further, the daily growth, feed conversion, mortality, slaughterhouse condemnation, production index, and antibiotic use were monitored in 110 broiler flocks derived from the breeders. All gathered data were examined statistically. In eggs obtained from breeders vaccinated twice with inactivated reovirus vaccine, a significant 2.88% higher hatchability rate was observed. The progeny broiler flocks of these breeders showed a significant 18.2% lower mortality during the fattening period. Although not statistically significant, the slaughterhouse condemnation rate was 10.1% lower as well. The results may indicate that-under the epidemiologic conditions of this study-double administration of inactivated reovirus vaccine in broiler breeders can at least contribute to higher hatchability of breeder eggs and lower broiler mortality.

  10. Isotope exchange reactions on ceramic breeder materials and their effect on tritium inventory

    Energy Technology Data Exchange (ETDEWEB)

    Nishikawa, M.; Baba, A. [Kyushu Univ., Fukuoka (Japan). Faculty of Engineering; Kawamura, Y.; Nishi, M.

    1998-03-01

    Though lithium ceramic materials such as Li{sub 2}O, LiAlO{sub 2}, Li{sub 2}ZrO{sub 3}, Li{sub 2}TiO{sub 3} and Li{sub 4}SiO{sub 4} are considered as breeding materials in the blanket of a D-T fusion reactor, the release behavior of the bred tritium in these solid breeder materials has not been fully understood. The isotope exchange reaction rate between hydrogen isotopes in the purge gas and tritium on the surface of breeding materials have not been quantified yet, although helium gas with hydrogen or deuterium is planned to be used as the blanket purge gas in the recent blanket designs. The mass transfer coefficient representing the isotope exchange reaction between H{sub 2} and D{sub 2}O or that between D{sub 2} and H{sub 2}O in the ceramic breeding materials bed is experimentally obtained in this study. Effects of isotope exchange reactions on the tritium inventory in the bleeding blanket is discussed based on data obtained in this study where effects of diffusion of tritium in the grain, absorption of water in the bulk of grain, and adsorption of water on the surface of grain, together with two types of isotope exchange reactions are considered. The way to estimate the tritium inventory in a Li{sub 2}ZrO{sub 3} blanket used in this study shows a good agreement with data obtained in such in-situ experiments as MOZART, EXOTIC-5, 6 and TRINE experiments. (author)

  11. Updated reference design of a liquid metal cooled tandem mirror fusion breeder

    Energy Technology Data Exchange (ETDEWEB)

    Berwald, D.H.; Whitley, R.H.; Garner, J.K.; Gromada, R.J.; McCarville, T.J.; Moir, R.W.; Lee, J.D.; Bandini, B.R.; Fulton, F.J.; Wong, C.P.C.; Maya, I.; Hoot, C.G.; Schultz, K.R.; Miller, L.G.; Beeston, J.M.; Harris, B.L.; Westman, R.A.; Ghoniem, N.M.; Orient, G.; Wolfer, M.; DeVan, J.H.; Torterelli, P.

    1985-09-01

    Detailed studies of key techinical issues for liquid metal cooled fusion breeder (fusion-fission hybrid blankets) have been performed during the period 1983-4. Based upon the results of these studies, the 1982 reference liquid metal cooled tandem mirror fusion breeder blanket design was updated and is described. The updated reference blankets provides increased breeding and lower technological risk in comparison with the original reference blanket. In addition to the blanket design revisions, a plant concept, cost, and fuel cycle economics assessment is provided. The fusion breeder continues to promise an economical source of fissile fuel for the indefinite future.

  12. Final Report on Isotope Ratio Techniques for Light Water Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Gerlach, David C.; Gesh, Christopher J.; Hurley, David E.; Mitchell, Mark R.; Meriwether, George H.; Reid, Bruce D.

    2009-07-01

    The Isotope Ratio Method (IRM) is a technique for estimating the energy or plutonium production in a fission reactor by measuring isotope ratios in non-fuel reactor components. The isotope ratios in these components can then be directly related to the cumulative energy production with standard reactor modeling methods.

  13. Parentage analysis with few contributing breeders: validation and improvement.

    Science.gov (United States)

    Duchesne, Pierre; Meldgaard, Torben; Berrebi, Patrick

    2008-01-01

    Validation of parental allocation using PAPA software (Duchesne P, Godbout MH, Bernatchez L. 2002. PAPA (package for the analysis of parental allocation): a computer program for simulated and real parental allocation. Mol Ecol Notes. 2:191-193.) was investigated under the assumption that only a small proportion of potential breeders contributed to the offspring sample. Inbreeding levels proved to have a large impact on allocation error rate. Consequently, simulations from artificial, unrelated parents may strongly underestimate allocation error, and so, whenever possible, simulations based on the actual parental genotypes should be run. An unexpected and interesting finding was that ambiguity (the highest likelihood is shared by several parental pairs) rates below 10% stood very close to exact allocation error rates (true proportions of wrong allocations). Hence, the ambiguity rate statistic may be viewed as a ready-made indicator of the resolution power of a specific parental allocation run and, if not exceeding 10%, used as an estimate of allocation error rate. It was found that the PAPA simulator, even with few contributing breeders, can be trusted to output reasonably accurate estimates of allocation error as long as those estimates do not exceed 15%. Indeed, most discrepancies between exact and estimated error then stood below 3%. Reproductive success variance had little impact on error estimate discrepancies within the same range. Finally, a (focal set) method was described to correct the estimated family sizes computed directly from parental allocations. Essentially, this method makes use of the detailed structure of the allocation probabilities associated with each parental pair with at least 1 allocated offspring. The allocation probabilities are expressed in matrix form, and the subsequent calculations are run based on standard matrix algebra. On average, this method provided better estimates of family sizes for each investigated combination of parameter

  14. Code qualification of structural materials for AFCI advanced recycling reactors.

    Energy Technology Data Exchange (ETDEWEB)

    Natesan, K.; Li, M.; Majumdar, S.; Nanstad, R.K.; Sham, T.-L. (Nuclear Engineering Division); (ORNL)

    2012-05-31

    This report summarizes the further findings from the assessments of current status and future needs in code qualification and licensing of reference structural materials and new advanced alloys for advanced recycling reactors (ARRs) in support of Advanced Fuel Cycle Initiative (AFCI). The work is a combined effort between Argonne National Laboratory (ANL) and Oak Ridge National Laboratory (ORNL) with ANL as the technical lead, as part of Advanced Structural Materials Program for AFCI Reactor Campaign. The report is the second deliverable in FY08 (M505011401) under the work package 'Advanced Materials Code Qualification'. The overall objective of the Advanced Materials Code Qualification project is to evaluate key requirements for the ASME Code qualification and the Nuclear Regulatory Commission (NRC) approval of structural materials in support of the design and licensing of the ARR. Advanced materials are a critical element in the development of sodium reactor technologies. Enhanced materials performance not only improves safety margins and provides design flexibility, but also is essential for the economics of future advanced sodium reactors. Code qualification and licensing of advanced materials are prominent needs for developing and implementing advanced sodium reactor technologies. Nuclear structural component design in the U.S. must comply with the ASME Boiler and Pressure Vessel Code Section III (Rules for Construction of Nuclear Facility Components) and the NRC grants the operational license. As the ARR will operate at higher temperatures than the current light water reactors (LWRs), the design of elevated-temperature components must comply with ASME Subsection NH (Class 1 Components in Elevated Temperature Service). However, the NRC has not approved the use of Subsection NH for reactor components, and this puts additional burdens on materials qualification of the ARR. In the past licensing review for the Clinch River Breeder Reactor Project (CRBRP

  15. Reactor Neutrinos

    CERN Document Server

    Lasserre, T; Lasserre, Thierry; Sobel, Henry W.

    2005-01-01

    We review the status and the results of reactor neutrino experiments, that toe the cutting edge of neutrino research. Short baseline experiments have provided the measurement of the reactor neutrino spectrum, and are still searching for important phenomena such as the neutrino magnetic moment. They could open the door to the measurement of coherent neutrino scattering in a near future. Middle and long baseline oscillation experiments at Chooz and KamLAND have played a relevant role in neutrino oscillation physics in the last years. It is now widely accepted that a new middle baseline disappearance reactor neutrino experiment with multiple detectors could provide a clean measurement of the last undetermined neutrino mixing angle theta13. We conclude by opening on possible use of neutrinos for Society: NonProliferation of Nuclear materials and Geophysics.

  16. NEUTRONIC REACTORS

    Science.gov (United States)

    Wigner, E.P.; Young, G.J.

    1958-10-14

    A method is presented for loading and unloading rod type fuel elements of a neutronic reactor of the heterogeneous, solld moderator, liquid cooled type. In the embodiment illustrated, the fuel rods are disposed in vertical coolant channels in the reactor core. The fuel rods are loaded and unloaded through the upper openings of the channels which are immersed in the coolant liquid, such as water. Unloading is accomplished by means of a coffer dam assembly having an outer sleeve which is placed in sealing relation around the upper opening. A radiation shield sleeve is disposed in and reciprocable through the coffer dam sleeve. A fuel rod engaging member operates through the axial bore in the radiation shield sleeve to withdraw the fuel rod from its position in the reactor coolant channel into the shield, the shield snd rod then being removed. Loading is accomplished in the reverse procedure.

  17. Overview of pool hydraulic design of Indian prototype fast breeder ...

    Indian Academy of Sciences (India)

    out for validation of the computer codes have also been described. Keywords. Fast reactor ..... water experiments and limited sodium experiments to validate computer codes and then using these validated computer ..... Based on detailed thermal hydraulic assessment of circumferential temperature non-uniformity and jet.

  18. Innovatieve huisvesting voor vleeskuikenouderdieren: "Quality Time" stal = Innovative broiler breeder housing system: 'Quality Time' house

    OpenAIRE

    Emous, van, R.A.; Gunnink, H.

    2011-01-01

    In this study results are presented of the research of implementing the innovative housing system "Quality Time" concept in a practical poultry house for broiler breeders. The "Quality Time" concept can improve the sexual behaviour and fertility of the eggs.

  19. Serological profiles of commercial broiler breeders and their progeny. 2. Newcastle disease virus.

    Science.gov (United States)

    King, D J

    1986-01-01

    Newcastle disease virus (NDV) hemagglutination-inhibition (HI) titers were determined for serum samples from eight commercial broiler breeder flocks and their progeny. The chickens sampled had been vaccinated and reared by different producers in different regions of the United States. Breeder flocks had the highest number of NDV-positive HI titers (greater than or equal to 1:10). Eighty percent or more of the samples from six of eight breeder flocks were positive; the geometric mean titers (GMTs) for those six breeder flocks ranged from 19 to 92. Only 3 of 8 broiler flocks had an increased frequency of positive titers and higher GMTs after vaccination. The frequency of positive titers was greater than 80% in only 2 of 8 of the oldest broiler flocks. The number of NDV-negative titers (less than 1:10) increased with age in most broiler flocks, even though all had been vaccinated once or more with live NDV vaccines.

  20. Helper effects on breeder allocations to direct care.

    Science.gov (United States)

    Kushnick, Geoff

    2012-01-01

    Mothers receive childcare and productive assistance from allomaternal helpers in many societies. Although much effort has been aimed toward showing helper effects on maternal reproductive success, less has been directed toward highlighting the full range of potential effects on breeder behavior. I present a model of optimal maternal care with helpers, and tests of derived hypotheses with data collected among the Karo Batak-a group of Indonesian agriculturalists. To test the model's predictions I compared the effect of women receiving help from patrilateral versus matrilateral kin because those kin may provide help with different maternal responsibilities. The model predicts a decrease in maternal allocation to care that is substitutable with the helper contribution and the helper assists with that type of care; it predicts an increase in care that is nonsubstitutable with the helper contribution or substitutable care when the helper assists with other responsibilities. With the exception of one other, most models have failed to account for an increase. Analyses of time spent carrying children supported the model. With matrilateral helpers, women increased carrying; with patrilateral helpers, they decreased it. Time spent farmworking showed the opposite pattern, suggesting that matrilateral helpers effectively decrease costs, nudging optimal maternal care upward. Patterns of breastfeeding provided little support for the model. The results do, however, suggest potential proximate mechanisms by which helpers influence maternal reproductive success in cooperative breeding societies. Copyright © 2012 Wiley Periodicals, Inc.

  1. Be-Breeder - Learning: a new tool for teaching and learning plant breeding principles

    OpenAIRE

    Roberto Fritsche-Neto; Filipe Inácio Matias

    2016-01-01

    Abstract The Be-Breeder application is an on-line tool constructed through the R software for the purpose of assisting in some of the main genetic and statistical analyses related to the area of plant breeding. In addition, Be-Breeder provides a section called "Learning", which in a simple click-point manner allows explanation of theories related to the effect of inbreeding, population structure, qualitative and quantitative traits, heterosis, population size, effect of selection, and composi...

  2. Profile of Serum Metabolites and Proteins of Broiler Breeders in Rearing Age

    Directory of Open Access Journals (Sweden)

    MS Rezende

    Full Text Available ABSTRACT The excellence of modern broiler production is based on the genetic improvement of broiler strains for high growth rate and high egg production, associated with technological developments in nutrition, management, and health. Over the last decades, the clinical biochemistry of broilers has been studied to determine serum biochemical component values; however, there are still many knowledge gaps on factors that determine changes in these values. In this study, the serum lipid and protein profiles of 4-week-old male and female Cobb broiler breeders were evaluated. Blood samples were collected on a commercial farm located in the city of Uberlândia, MG, Brazil. The following parameters were evaluated: total protein, albumin, globulin, albumin to globulin ratio (A/V, uric acid, urea, cholesterol, and triglyceride levels using an automatic analyzer. The results showed sex-specific biochemical patterns for most blood parameters evaluated. Moreover, the obtained values were different from those obtained in many published studies with broilers and commercial layers, stressing the need to develop further studies with chickens of different ages.

  3. Nuclear Reactors and Technology

    Energy Technology Data Exchange (ETDEWEB)

    Cason, D.L.; Hicks, S.C. [eds.

    1992-01-01

    This publication Nuclear Reactors and Technology (NRT) announces on a monthly basis the current worldwide information available from the open literature on nuclear reactors and technology, including all aspects of power reactors, components and accessories, fuel elements, control systems, and materials. This publication contains the abstracts of DOE reports, journal articles, conference papers, patents, theses, and monographs added to the Energy Science and Technology Database during the past month. Also included are US information obtained through acquisition programs or interagency agreements and international information obtained through the International Energy Agency`s Energy Technology Data Exchange or government-to-government agreements. The digests in NRT and other citations to information on nuclear reactors back to 1948 are available for online searching and retrieval on the Energy Science and Technology Database and Nuclear Science Abstracts (NSA) database. Current information, added daily to the Energy Science and Technology Database, is available to DOE and its contractors through the DOE Integrated Technical Information System. Customized profiles can be developed to provide current information to meet each user`s needs.

  4. Neutronic reactor

    Science.gov (United States)

    Wende, Charles W. J.; Babcock, Dale F.; Menegus, Robert L.

    1983-01-01

    A nuclear reactor includes an active portion with fissionable fuel and neutron moderating material surrounded by neutron reflecting material. A control element in the active portion includes a group of movable rods constructed of neutron-absorbing material. Each rod is movable with respect to the other rods to vary the absorption of neutrons and effect control over neutron flux.

  5. Neutronic reactor

    Energy Technology Data Exchange (ETDEWEB)

    Babcock, D.F.; Menegus, R.L.; Wende, C.W.

    1983-01-04

    A nuclear reactor includes an active portion with fissionable fuel and neutron moderating material surrounded by neutron reflecting material. A control element in the active portion includes a group of movable rods constructed of neutron-absorbing material. Each rod is movable with respect to the other rods to vary the absorption of neutrons and effect control over neutron flux.

  6. Digestible Threonine Levels in the Starter Diet of Broilers Derived from Breeders of Different Ages

    Directory of Open Access Journals (Sweden)

    CBGS Tanure

    2015-12-01

    Full Text Available ABSTRACT The aim of this study was to evaluate the effect of digestible threonine supplementation in the starter diet on the performance, intestinal parameters, and nutrient metabolism of broilers derived from breeders of different ages. In total, 480 one-day-old Cobb chicks, derived from 38-or 49-week-oldbreeders, were housed in experimental battery cages until 21 days of age and fed four different threonine levels (800, 900, 1,000, or 1,100 mg/kg in the starter feed. A completely randomized experimental design in a 2x4 factorial arrangement (breeder age x threonine levels was applied, totaling eight treatments with five replicates of 12 birds each. Broilers from older breeders fed 800 mg digestible threonine/kg of diet presented higher weight gain, with a positive linear effect. There was also an interaction between breeder age and threonine levels for the weight gain of 21-d-old broilers supplemented at maximum level of 1,003 mg Thr/kg diet during the starter phase. There was no effect of breeder age or threonine levels on nutrient metabolism during the period of 17-21 days. There was no influence of breeder age or threonine levels in the starter diet on intestinal morphometric measurements, absorption area, or percentage of goblet cells.

  7. Space reactors. Progress report, July-September 1981

    Energy Technology Data Exchange (ETDEWEB)

    Ranken, W.A. (comp.)

    1982-06-01

    Progress in technology development for the Space Power Advanced Reactor (SPAR) project is reported for the period July 1-September 30, 1981. The weights of neutron and gamma shields required to protect the SPAR system payloads for a range of permissible exposures have been determined, and initial results are reported. SPAR reactor safety in the case of water immersion has been modeled. Approval-in-Principle has been received for the SPAR fuel test in the Experimental Breeder Reactor-II (EBR-II); the heat pipe developed for this test is performing well. SPAR system design variations are being examined under the possibility of using long core heat pipes. Testing of the initial molybdenum/sodium artery heat pipe continued, with ambiguous results. Fabrication of the first all-bonded thermoelectric units has been completed and testing has been initiated.

  8. Selective breeding of Arabian and Thoroughbred racehorses in Algeria: perceptions, objectives and practices of owners-breeders

    Directory of Open Access Journals (Sweden)

    Safia Tennah

    2014-04-01

    Full Text Available This survey, conducted with 461 racehorse owners-breeders in Algeria between 2009 and 2011, investigates their perceptions, objectives and practices regarding selective breeding. Racehorse breeding is a full-time professional activity for a third of interviewees. The holdings are small-sized with 77% owning one or two mares. The regular practice of mating is here used to categorize breeders according to their degree of professionalization (38.4% professional vs. 61.6% occasional breeders. Experience in the sector was also used to classify breeders, considering as "junior" the breeders under 10 years experience (38.8% and as "senior" those above 10 years (61.2%. More than professionalization, experience shows a significant impact on practices and objectives. Thus, experience influences breed choice (junior breeders tend to specialize while senior own both Arabian and Thoroughbreds, age at first foaling (sooner among senior breeders, information sources considered for selecting stallions (senior use more diversified sources, the importance granted to the price of mating (greater for junior breeders, the importance granted to the ranking compared to earnings (the ranking being more important to junior breeders, and the priority given to breeding (junior breeders give higher priority to a buy-race-resell activity. Finally, racehorse breeding is poorly professionalized, the only financial goal being cost coverage. Despite inappropriate practices, an interest for selection is noticed.

  9. Verification of Remote Inspection Techniques for Reactor Internal Structures of Liquid Metal Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Joo, Young Sang; Lee, Jae Han

    2007-02-15

    The reactor internal structures and components of a liquid metal reactor (LMR) are submerged in hot sodium of reactor vessel. The division 3 of ASME code section XI specifies the visual inspection as major in-service inspection (ISI) methods of reactor internal structures and components. Reactor internals of LMR can not be visually examined due to opaque liquid sodium. The under-sodium viewing techniques using an ultrasonic wave should be applied for the visual inspection of reactor internals. Recently, an ultrasonic waveguide sensor with a strip plate has been developed for an application to the under-sodium inspection. In this study, visualization technique, ranging technique and monitoring technique have been suggested for the remote inspection of reactor internals by using the waveguide sensor. The feasibility of these remote inspection techniques using ultrasonic waveguide sensor has been evaluated by an experimental verification.

  10. Nuclear reactor shield including magnesium oxide

    Science.gov (United States)

    Rouse, Carl A.; Simnad, Massoud T.

    1981-01-01

    An improvement in nuclear reactor shielding of a type used in reactor applications involving significant amounts of fast neutron flux, the reactor shielding including means providing structural support, neutron moderator material, neutron absorber material and other components as described below, wherein at least a portion of the neutron moderator material is magnesium in the form of magnesium oxide either alone or in combination with other moderator materials such as graphite and iron.

  11. Microwave cavity studies for thermal testing of ceramic breeder materials

    Energy Technology Data Exchange (ETDEWEB)

    Kuston, R.L.

    1987-01-01

    Dielectric heating of proposed ceramic tritium breeder material to study the thermomechanical and thermal-hydraulic properties of the material has been previously suggested. Recent computer studies using codes capable of modeling three-dimensional EM cavities with enclosed dielectric material have been used to determine the size limitations of cavity designs at 200 MHz. The sample can be as large as 0.44 /times/ 0.72m in the plane that is transverse to the direction of neutron flux. The uniformity of volumetric heating over the transverse plane is constant to within a few percent. The sample can be as long as 10cm in the direction of the heat flux and match the expected exponential decay of heat generation, exp( /minus/z/lambda), to within +/minus/8%. The design of the chamber is decribed, including the sample region, additional dielectric loading blocks on two sides of the sample region that are required to generate the field uniformity in the transverse plane, and a description of the matching-section portion of the cavity which provides the correct geometry to cause the cavity to resonate at 200 MHz with the right z dependence to stimulate the exponentially-decaying heat profile in the sample region. The matching section consists of two dielectric slabs, one on each wall of the chamber, and an air or free space region in the center of the matching section. The coupling loop is located near the wall end of the matching section in the free space region. 7 refs., 2 figs.

  12. Numerical research on the neutronic/thermal-hydraulic/mechanical coupling characteristics of the optimized helium cooled solid breeder blanket for CFETR

    Energy Technology Data Exchange (ETDEWEB)

    Cui, Shijie; Zhang, Dalin, E-mail: dlzhang@mail.xjtu.edu.cn; Cheng, Jie; Tian, Wenxi; Su, G.H.

    2017-01-15

    As one of the candidate tritium breeding blankets for Chinese Fusion Engineering Test Reactor (CFETR), a conceptual structure of the helium cooled solid breeder blanket has recently been proposed. The neutronic, thermal-hydraulic and mechanical characteristics of the blanket directly affect its tritium breeding and safety performance. Therefore, neutronic/thermal-hydraulic/mechanical coupling analyses are of vital importance for a reliable blanket design. In this work, first, three-dimensional neutronics analysis and optimization of the typical outboard equatorial blanket module (No. 12) were performed for the comprehensive optimal scheme. Then, thermal and fluid dynamic analyses of the scheme under both normal and critical conditions were performed and coupled with the previous neutronic calculation results. With thermal-hydraulic boundaries, thermo-mechanical analyses of the structure materials under normal, critical and blanket over-pressurization conditions were carried out. In addition, several parametric sensitivity studies were also conducted to investigate the influences of the main parameters on the blanket temperature distributions. In this paper, the coupled analyses verify the reasonability of the optimized conceptual design preliminarily and can provide an important reference for the further analysis and optimization design of the CFETR helium cooled solid breeder blanket.

  13. Comparison of serum leptin, glucose, total cholesterol and total protein levels in fertile and repeat breeder cows

    Directory of Open Access Journals (Sweden)

    Saime Guzel

    2014-12-01

    Full Text Available In the present study we measured serum glucose, leptin, total cholesterol and total protein concentrations in repeat breeder cows and compared them with fertile cows. For this aim, 20 repeat breeder cows and 20 fertile cows were used as material. Repeat breeder cows were found to have lower levels of leptin and glucose as compared with fertile ones. No significant differences in total cholesterol and total protein levels were observed between the two groups. No significant correlation of leptin with glucose, total cholesterol and total protein was observed in fertile and repeat breeder cows. Low concentrations of glucose and leptin can have some effects on reproductive problems as repeat breeder and help to understand potential mechanisms impairing fertility in repeat breeder cows.

  14. OECD - HRP Summer School on Light Water Reactor Structural Materials. August 26th - 30th, 2002

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    In cooperation with the OECD Nuclear Energy Agency (NEA), the Halden Reactor Project organised a Summer School on Light Water Reactor Structural Materials in the period August 26 - 30, 2002. The summer school was primarily intended for people who wanted to become acquainted with materials-related subjects and issues without being experts. It is especially hoped that the summer school served to transfer knowledge to the ''young generation'' in the field of nuclear. Experts from Halden Project member organisations were solicited for the following programme: (1) Overview of The Nuclear Community and Current Issues, (2) Regulatory Framework for Ensuring Structural Integrity, (3) Non-Destructive Testing for Detection of Cracks, (4) Part I - Basics of Radiation and Radiation Damage, (5) Part II - Radiation Effects on Reactor Internal Materials, (6) Water Chemistry and Radiolysis Effects in LWRs, (7) PWR and Fast Breeder Reactor Internals, (8) PWR and Fast Breeder Reactor Internals, (9) Secondary Side Corrosion Cracking of PWR Steam Generator Tubes, (10) BWR Materials and Their Interaction with the Environment, (11) Radiation Damage in Reactor Pressure Vessels.

  15. Radionuclide inventories in the discharged fuels of PHWR-220, BWR-160, VVER-1000 and the conceptual ATBR-600 reactors - A case study

    Energy Technology Data Exchange (ETDEWEB)

    Pal, Usha [Light Water Reactors Physics Section, Reactor Physics Design Division, Bhabha Atomic Research Centre, Mumbai 400 085 (India)], E-mail: ushapal@barc.gov.in; Jagannathan, V. [Light Water Reactors Physics Section, Reactor Physics Design Division, Bhabha Atomic Research Centre, Mumbai 400 085 (India)], E-mail: vjagan@barc.gov.in

    2008-10-15

    Radionuclides content in the discharged fuel of the conceptual thorium breeder reactor ATBR-600 has been assessed and compared against other thermal power reactors considered in Indian nuclear power programme. The contribution of actinides and the fission products inventories in the discharged fuels are separately estimated and assessed. The ATBR-600 reactor is suggested for closed fuel cycle option. The relatively large presence of the unspent plutonium would in fact be recycled. Nonetheless, the data has been presented in the event of operating ATBR-600 like other present day power reactors in a once through fuel cycle mode.

  16. The integral fast reactor and its role in a new generation of nuclear power plants, Tokai, Japan, November 19-21, 1986

    Energy Technology Data Exchange (ETDEWEB)

    Smith, R.R.

    1986-01-01

    This report presents information on the Integral Fast Reactor and its role in the future. Information is presented in the areas of: inherent safety; other virtues of sodium-cooled breeder; and solving LWR fuel cycle problems with IFR technologies. (JDB)

  17. Fusion reactor blanket with Li17-Pb83 eutectic

    Energy Technology Data Exchange (ETDEWEB)

    Antipenkov, A.; Danilov, I.; Epinatiev, A.; Eremin, S.; Kalinin, G.; Kolganov, V.; Poliksha, V.; Shchipakin, O.; Shiverski, E.; Sidorov, A.; Skladnov, K.; Strebkov, Yu. (Research and Development Inst. of Power Engineering, Moscow (USSR)); Butko, A.; Kuzmin, A. (Moscow Inst. for Hydraulic Engineering and Land-Reclamation (USSR)); Chepovski, A.; Khripunov, V.; Shatalov, G. (Kurchatov Inst. of Atomic Energy, Moscow (USSR))

    1991-04-01

    The article contains some features of using Li17-Pb83 eutectic as a breeder for ITER/OTR fusion reactor. Described blanket design options aim to reduce electromagnetic loads or relieve eutectic/channel interaction. Eutectic channel stress analysis confirms design feasibility. Channel temperature behaviour is analyzed for loss of blanket cooling system power and rupture of a distribution header accidents. First wall and blanket failure rates were evaluated. The results of neutron power density distribution and tritium breeding ratio estimation are presented. Polonium concentration dynamics is estimated for accidental conditions. Some guide-lines for future work and design progress are advised. (orig.).

  18. Lead-cooled fast reactor (LFR) overview and perspectives

    OpenAIRE

    CINOTTI Luciano; Smith, Craig F.; SEKIMOTO, HIROSHI

    2009-01-01

    The GIF Technology Roadmap identified the Lead-cooled Fast Reactor (LFR) as a technology with great potential to meet the small-unit electricity needs of remote sites while also offering advantages as a large system for grid-connected power stations. The LFR features a fast- neutron spectrum and a closed fuel cycle for efficient conversion of fertile uranium. It can also be used as a burner of minor actinides from spent fuel and as a burner/breeder. An important feature of the LFR is the ...

  19. Neutronic performance of two European breeder-inside-tube (BIT) blankets for DEMO: the helium-cooled ceramic LiAlO{sub 2} with Be multiplier and the water-cooled liquid Li{sub 17}Pb

    Energy Technology Data Exchange (ETDEWEB)

    Petrizzi, L. [Associazione EURATOM-ENEA sulla Fusione, Frascati (Italy); Rado, V. [Associazione EURATOM-ENEA sulla Fusione, Frascati (Italy)

    1995-03-01

    In support of ENEA activity in the European Community Test Programme, neutron analysis has been performed on the two latest blanket designs: helium-cooled ceramic breeder-inside-tube (BIT) (with LiAlO{sub 2} and Be multiplier) and water-cooled liquid Li{sub 17}Pb in cylindrical modules (CM). The powerful MCNP Monte Carlo code was used (version 4.2). A detailed and accurate description of the geometrical model has been performed by inserting the main reactor details and avoiding breeder material dilution inside the modules. The tritium breeding ratio (TBR) performance is low for the solid breeder BIT blanket (with 10 ports 1.011) due mainly to low blanket coverage near the exhaust duct, and this solution should be revised. The CM Li{sub 17}Pb blanket reaches a sufficient TBR (1.059, with ports) to rely on tritium self-sufficiency. Shielding properties, with respect to the toroidal field coils, have been estimated in a simplified model by means of the ANISN code, supplied with a nuclear data library consistent with that used by MCNP. The analysis suggests that a careful shield thickness/composition design should be used to ensure the shielding capability of the whole blanket plus shield system. (orig.).

  20. Formation of the research competence of future breeder-geneticists during the practical training

    Directory of Open Access Journals (Sweden)

    Наталія Павлівна Антіпова

    2016-03-01

    Full Text Available In the article were analyzed content, structure and special features of the practical training of the future breeder-geneticists. There was specified that for bachelor breeder-geneticists of the 6.090101 “Agronomy” training direction are provided the following practices: botany, tractors and cars, soil science, agricultural machines, fruit growing, vegetable growing, agriculture, agrochemistry, plant growing, entomology, phytopathology, technology of retreatment and preservation of plant growing production, selection and seed growing of agricultural crops; work practice on agronomy.In the article was grounded the structural-logic scheme of organization of practices of the future breeder-geneticists for forming their professional research competences. There were analyzed functions and methods of scientific-cognitive activity, forms, means and methods of the practical education. According to the types of practices there were elucidated and grounded the structure of practical training of the future breeder-geneticists – natural-technical and special-professional – educational and work practices.The natural-technical, special-professional and production-technological practices form in bachelor agronomists breeder-geneticists professional scientific-research competences: theoretical-analytical ones – geosphere, bio-geo-physical-chemical, meteorological-climatological, informative, fundamental and applied ecological, fundamental-scientific agrosphere; professional competences of professionally oriented and special practical training – agricultural, branch, techno-service, technological, selective, special-genetic-engineering ones; managerial ones

  1. Nuclear Reactors. Revised.

    Science.gov (United States)

    Hogerton, John F.

    This publication is one of a series of information booklets for the general public published by the United States Atomic Energy Commission. Among the topics discussed are: How Reactors Work; Reactor Design; Research, Teaching, and Materials Testing; Reactors (Research, Teaching and Materials); Production Reactors; Reactors for Electric Power…

  2. Nuclear reactor PBMR and cogeneration; Reactor nuclear PBMR y cogeneracion

    Energy Technology Data Exchange (ETDEWEB)

    Ramirez S, J. R.; Alonso V, G., E-mail: ramon.ramirez@inin.gob.mx [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2013-10-15

    In recent years the nuclear reactor designs for the electricity generation have increased their costs, so that at the moment costs are managed of around the 5000 US D for installed kw, reason for which a big nuclear plant requires of investments of the order of billions of dollars, the designed reactors as modular of low power seek to lighten the initial investment of a big reactor dividing the power in parts and dividing in modules the components to lower the production costs, this way it can begin to build a module and finished this to build other, differing the long term investment, getting less risk therefore in the investment. On the other hand the reactors of low power can be very useful in regions where is difficult to have access to the electric net being able to take advantage of the thermal energy of the reactor to feed other processes like the water desalination or the vapor generation for the processes industry like the petrochemical, or even more the possible hydrogen production to be used as fuel. In this work the possibility to generate vapor of high quality for the petrochemical industry is described using a spheres bed reactor of high temperature. (Author)

  3. A fission-fusion hybrid reactor in steady-state L-mode tokamak configuration with natural uranium

    Energy Technology Data Exchange (ETDEWEB)

    Reed, Mark; Parker, Ronald R.; Forget, Benoit [Department of Nuclear Science and Engineering, Massachusetts Institute of Technology 77 Massachusetts Avenue, Cambridge, MA 02139 (United States)

    2012-06-19

    This work develops a conceptual design for a fusion-fission hybrid reactor operating in steady-state L-mode tokamak configuration with a subcritical natural or depleted uranium pebble bed blanket. A liquid lithium-lead alloy breeds enough tritium to replenish that consumed by the D-T fusion reaction. The fission blanket augments the fusion power such that the fusion core itself need not have a high power gain, thus allowing for fully non-inductive (steady-state) low confinement mode (L-mode) operation at relatively small physical dimensions. A neutron transport Monte Carlo code models the natural uranium fission blanket. Maximizing the fission power gain while breeding sufficient tritium allows for the selection of an optimal set of blanket parameters, which yields a maximum prudent fission power gain of approximately 7. A 0-D tokamak model suffices to analyze approximate tokamak operating conditions. This fission blanket would allow the fusion component of a hybrid reactor with the same dimensions as ITER to operate in steady-state L-mode very comfortably with a fusion power gain of 6.7 and a thermal fusion power of 2.1 GW. Taking this further can determine the approximate minimum scale for a steady-state L-mode tokamak hybrid reactor, which is a major radius of 5.2 m and an aspect ratio of 2.8. This minimum scale device operates barely within the steady-state L-mode realm with a thermal fusion power of 1.7 GW. Basic thermal hydraulic analysis demonstrates that pressurized helium could cool the pebble bed fission blanket with a flow rate below 10 m/s. The Brayton cycle thermal efficiency is 41%. This reactor, dubbed the Steady-state L-mode non-Enriched Uranium Tokamak Hybrid (SLEUTH), with its very fast neutron spectrum, could be superior to pure fission reactors in terms of breeding fissile fuel and transmuting deleterious fission products. It would likely function best as a prolific plutonium breeder, and the plutonium it produces could actually be more

  4. Photocatalytic reactor

    Science.gov (United States)

    Bischoff, Brian L.; Fain, Douglas E.; Stockdale, John A. D.

    1999-01-01

    A photocatalytic reactor for processing selected reactants from a fluid medium comprising at least one permeable photocatalytic membrane having a photocatalytic material. The material forms an area of chemically active sites when illuminated by light at selected wavelengths. When the fluid medium is passed through the illuminated membrane, the reactants are processed at these sites separating the processed fluid from the unprocessed fluid. A light source is provided and a light transmitting means, including an optical fiber, for transmitting light from the light source to the membrane.

  5. Mechanical systems development of integral reactor

    Energy Technology Data Exchange (ETDEWEB)

    Park, Keun Bae; Chang, M. H.; Kim, J. I.; Choi, S.; Kim, K. S.; Kim, T. W.; Jeong, K. H.; Kim, J. H.; Kim, Y. W.; Lee, G. M.

    1997-07-01

    While Korean nuclear reactor strategy seems to remain focused on the large capacity power generation, it is expected that demand of small and medium size reactor will arise for multi-purpose applications such as small capacity power generation, co-generation and sea water desalination. This in mind, survey has been made on the worldwide small and medium integral reactors under development. Reviewed are their technical characteristics, development status, design features, application plans, etc. For the mechanical design scope of work, the structural concept compatible with the characteristics and requirements of integral reactor has been established. Types of major components were evaluated and selected. Functional and structural concept, equipment layout and supporting concept within the reactor pressure vessel have also been established. Preliminary mechanical design requirements were developed considering the reactor lifetime, operation conditions, and the expected loading combinations. To embody the concurrent design approach, recent CAD technology and team engineering concept were evaluated. (author). 31 refs.,16 tabs., 35 figs.

  6. Reactor core and plant design concepts of the Canadian supercritical water-cooled reactor

    Energy Technology Data Exchange (ETDEWEB)

    Yetisir, M.; Gaudet, M.; Bailey, J.; Rhodes, D.; Guzonas, D.; Hamilton, H.; Haque, Z.; Pencer, J.; Sartipi, A. [Atomic Energy of Canada Limited, Chalk River, ON (Canada)

    2014-07-01

    Canada is developing a 1200 MWe supercritical water-cooled reactor (SCWR), which has evolved from the well-established pressure-tube type CANDU{sup 1} reactor. This SCWR reactor concept, which is often referred to as the Canadian SCWR, uses supercritical water as a coolant, has a low-pressure heavy water moderator and a direct cycle for power production. The reactor concept incorporates advanced safety features, such as passive emergency core cooling, long-term decay heat rejection to the environment and fuel melt prevention via passive moderator cooling. These features significantly reduce the core damage frequency beyond existing nuclear reactors. This paper presents a description of the Canadian SCWR core design concept, the integration of in-core and out-of-core components and the mechanical plant design concept. Supporting systems for reactor safety, reactor control and moderator cooling are also described. (author)

  7. Be-Breeder - Learning: a new tool for teaching and learning plant breeding principles

    Directory of Open Access Journals (Sweden)

    Roberto Fritsche-Neto

    2016-09-01

    Full Text Available The Be-Breeder application is an on-line tool constructed through the R software for the purpose of assisting in some of the main genetic and statistical analyses related to the area of plant breeding. In addition, Be-Breeder provides a section called “Learning”, which in a simple click-point manner allows explanation of theories related to the effect of inbreeding, population structure, qualitative and quantitative traits, heterosis, population size, effect of selection, and composition of hybrids. Be-Breeder is available for network use on the website of the Allogamous Plant Breeding Laboratory (Laboratório de Melhoramento de Plantas Alógamas of ESALQ-USP through the link: http://www.genetica.esalq.usp.br/alogamas/R.html.

  8. Hybrid adsorptive membrane reactor

    Energy Technology Data Exchange (ETDEWEB)

    Tsotsis, Theodore T [Huntington Beach, CA; Sahimi, Muhammad [Altadena, CA; Fayyaz-Najafi, Babak [Richmond, CA; Harale, Aadesh [Los Angeles, CA; Park, Byoung-Gi [Yeosu, KR; Liu, Paul K. T. [Lafayette Hill, PA

    2011-03-01

    A hybrid adsorbent-membrane reactor in which the chemical reaction, membrane separation, and product adsorption are coupled. Also disclosed are a dual-reactor apparatus and a process using the reactor or the apparatus.

  9. D and DR Reactors

    Data.gov (United States)

    Federal Laboratory Consortium — The world's second full-scale nuclear reactor was the D Reactor at Hanford which was built in the early 1940's and went operational in December of 1944.D Reactor ran...

  10. Reactor transient

    Energy Technology Data Exchange (ETDEWEB)

    Menegus, R.L.

    1956-05-31

    The authors are planning a calculation to be done on the Univac at the Louviers Building to estimate the effect of xenon transients, a high reactor power. This memorandum outlines the reasons why they prefer to do the work at Louviers rather than at another location, such as N.Y.U. They are to calculate the response of the reactor to a sudden change in position of the half rods. Qualitatively, the response will be a change in the rooftop ratio of the neutron flux. The rooftop ratio may oscillate with high damping, or, instead, it may oscillate for many cycles. It has not been possible for them to determine this response by hand calculation because of the complexity of the problem, and yet it is important for them to be certain that high power operation will not lead us to inherently unstable operation. Therefore they have resorted to machine computation. The system of differential equations that describes the response has seven dependent variables; therefore there are seven equations, each coupled with one or more of the others. The authors have discussed the problem with R.R. Haefner at the plant, and it is his opinion that the IBM 650 cannot adequately handle the system of seven equations because the characteristic time constants vary over a range of about 10{sup 8}. The Univac located at the Louviers Building is said to be satisfactory for this computation.

  11. High Temperature Ultrasonic Transducers for In-Service Inspection of Liquid Metal Fast Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Griffin, Jeffrey W.; Posakony, Gerald J.; Harris, Robert V.; Baldwin, David L.; Jones, Anthony M.; Bond, Leonard J.

    2011-12-31

    In-service inspection of liquid metal (sodium) fast reactors requires the use of ultrasonic transducers capable of operating at high temperatures (>200°C), high gamma radiation fields, and the chemically reactive liquid sodium environment. In the early- to mid-1970s, the U.S. Atomic Energy Commission supported development of high-temperature, submersible single-element transducers, used for scanning and under-sodium imaging in the Fast Flux Test Facility and the Clinch River Breeder Reactor. Current work is building on this technology to develop the next generation of high-temperature linear ultrasonic transducer arrays for under-sodium viewing and in-service inspections.

  12. Effects of environmental temperature and dietary energy on energy partitioning coefficients of female broiler breeders.

    Science.gov (United States)

    Pishnamazi, A; Renema, R A; Paul, D C; Wenger, I I; Zuidhof, M J

    2015-10-01

    With increasing disparity between broiler breeder target weights and broiler growth potential, maintenance energy requirements have become a larger proportion of total broiler breeder energy intake. Because energy is partitioned to growth and egg production at a lower priority than maintenance, accurate prediction of maintenance energy requirements is important for practical broiler breeder feed allocation decisions. Environmental temperature affects the maintenance energy requirement by changing rate of heat loss to the environment. In the ME system, heat production (energy lost) is part of the maintenance requirement (ME). In the current study, a nonlinear mixed model was derived to predict ME partitioning of broiler breeder hens under varied temperature conditions. At 21 wk of age, 192 Ross 708 hens were individually caged within 6 controlled environmental chambers. From 25 to 41 wk, 4 temperature treatments (15°C, 19°C, 23°C, and 27°C) were randomly assigned to the chambers for 2-week periods. Half of the birds in each chamber were fed a high-energy (HE; 2,912 kcal/kg) diet, and half were fed a low-energy (LE; 2,790 kcal/kg) diet. The nonlinear mixed regression model included a normally distributed random term representing individual hen maintenance, a quadratic response to environmental temperature, and linear ADG and egg mass (EM) coefficients. The model assumed that energy requirements for BW gain and egg production were not influenced by environmental temperature because hens were homeothermic, and the cellular processes for associated biochemical processes occurred within a controlled narrow core body temperature range. Residual feed intake (RFI) and residual ME (RME) were used to estimate efficiency. A quadratic effect of environmental temperature on broiler breeder MEm was predicted ( broiler breeders fed the HE diet.

  13. Proceedings of the sixth international workshop on ceramic breeder blanket interactions

    Energy Technology Data Exchange (ETDEWEB)

    Noda, Kenji [ed.

    1998-03-01

    This report is the Proceedings of `the Sixth International Workshop on Ceramic Breeder Blanket Interactions` which was held as a workshop on ceramic breeders under Annex II of IEA Implementing Agreement on a Programme of Research and Development on Fusion Materials, and Japan-US Workshop 97FT4-01. This workshop was held in Mito city, Japan on October 22-24, 1997. About forty experts from EU, Japan, USA, and Chile attended the workshop. The scope of the workshop included the following: (1) fabrication and characterization of ceramic breeders, (2) properties data for ceramic breeders, (3) tritium release characteristics, (4) modeling of tritium behavior, (5) irradiation effects on performance behavior, (6) blanket design and R and D requirements, (7) hydrogen behavior in materials, and (8) blanket system technology and structural materials. In the workshop, information exchange was performed for fabrication technology of ceramic breeder pebbles in EU and Japan, data of various properties of Li{sub 2}TiO{sub 3}, tritium release behavior of Li{sub 2}TiO{sub 3} and Li{sub 2}ZrO{sub 3} including tritium diffusion, modeling of tritium release from Li{sub 2}ZrO{sub 3} in ITER condition, helium release behavior from Li{sub 2}O, results of tritium release irradiation tests of Li{sub 4}SiO{sub 4} pebbles in EXOTIC-7, R and D issues for ceramic breeders for ITER and DEMO blankets, etc. The 23 of the papers are indexed individually. (J.P.N.)

  14. Microchannel Reactors for ISRU Applications

    Science.gov (United States)

    Carranza, Susana; Makel, Darby B.; Blizman, Brandon; Ward, Benjamin J.

    2005-02-01

    Affordable planning and execution of prolonged manned space missions depend upon the utilization of local resources and the waste products which are formed in manned spacecraft and surface bases. Successful in-situ resources utilization (ISRU) will require component technologies which provide optimal size, weight, volume, and power efficiency. Microchannel reactors enable the efficient chemical processing of in situ resources. The reactors can be designed for the processes that generate the most benefit for each mission. For instance, propellants (methane) can be produced from carbon dioxide from the Mars atmosphere using the Sabatier reaction and ethylene can be produced from the partial oxidation of methane. A system that synthesizes ethylene could be the precursor for systems to synthesize ethanol and polyethylene. Ethanol can be used as a nutrient for Astrobiology experiments, as well as the production of nutrients for human crew (e.g. sugars). Polyethylene can be used in the construction of habitats, tools, and replacement parts. This paper will present recent developments in miniature chemical reactors using advanced Micro Electro Mechanical Systems (MEMS) and microchannel technology to support ISRU of Mars and lunar missions. Among other applications, the technology has been demonstrated for the Sabatier process and for the partial oxidation of methane. Microchannel reactors were developed based on ceramic substrates as well as metal substrates. In both types of reactors, multiple layers coated with catalytic material are bonded, forming a monolithic structure. Such reactors are readily scalable with the incorporation of extra layers. In addition, this reactor structure minimizes pressure drop and catalyst settling, which are common problems in conventional packed bed reactors.

  15. Validation of the TRACE code for the system dynamic simulations of the molten salt reactor experiment and the preliminary study on the dual fluid molten salt reactor

    Energy Technology Data Exchange (ETDEWEB)

    He, Xun

    2016-06-14

    Molten Salt Reactor (MSR), which was confirmed as one of the six Generation IV reactor types by the GIF (Generation IV International Forum in 2008), recently draws a lot of attention all around the world. Due to the application of liquid fuels the MSR can be regarded as the most special one among those six GEN-IV reactor types in a sense. A unique advantage of using liquid nuclear fuel lies in that the core melting accident can be thoroughly eliminated. Besides, a molten salt reactor can have several fuel options, for instance, the fuel can be based on {sup 235}U, {sup 232}Th-{sup 233}U, {sup 238}U-{sup 239}Pu cycle or even the spent nuclear fuel (SNF), so the reactor can be operated as a breeder or as an actinides burner both with fast, thermal or epi-thermal neutron spectrum and hence, it has excellent features of the fuel sustainability and for the non-proliferation. Furthermore, the lower operating pressure not only means a lower risk of the explosion as well as the radioactive leakage but also implies that the reactor vessel and its components can be lightweight, thus lowering the cost of equipments. So far there is no commercial MSR being operated. However, the MSR concept and its technical validation dates back to the 1960s to 1970s, when the scientists and engineers from ORNL (Oak Ridge National Laboratory) in the United States managed to build and run the world's first civilian molten salt reactor called MSRE (Molten Salt Reactor Experiment). The MSRE was an experimental liquid-fueled reactor with 10 MW thermal output using {sup 4}LiF-BeF{sub 2}-ZrF{sub 4}-UF{sub 4} as the fuel also as the coolant itself. The MSRE is usually taken as a very important reference case for many current researches to validate their codes and simulations. Without exception it works also as a benchmark for this thesis. The current thesis actually consists of two main parts. The first part is about the validation of the current code for the old MSRE concept, while the second

  16. In-situ Condition Monitoring of Components in Small Modular Reactors Using Process and Electrical Signature Analysis. Final report, volume 1. Development of experimental flow control loop, data analysis and plant monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Upadhyaya, Belle [Univ. of Tennessee, Knoxville, TN (United States); Hines, J. Wesley [Univ. of Tennessee, Knoxville, TN (United States); Damiano, Brian [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Mehta, Chaitanya [Univ. of Tennessee, Knoxville, TN (United States); Collins, Price [Univ. of Tennessee, Knoxville, TN (United States); Lish, Matthew [Univ. of Tennessee, Knoxville, TN (United States); Cady, Brian [Univ. of Tennessee, Knoxville, TN (United States); Lollar, Victor [Univ. of Tennessee, Knoxville, TN (United States); de Wet, Dane [Univ. of Tennessee, Knoxville, TN (United States); Bayram, Duygu [Univ. of Tennessee, Knoxville, TN (United States)

    2015-12-15

    The research and development under this project was focused on the following three major objectives: Objective 1: Identification of critical in-vessel SMR components for remote monitoring and development of their low-order dynamic models, along with a simulation model of an integral pressurized water reactor (iPWR). Objective 2: Development of an experimental flow control loop with motor-driven valves and pumps, incorporating data acquisition and on-line monitoring interface. Objective 3: Development of stationary and transient signal processing methods for electrical signatures, machinery vibration, and for characterizing process variables for equipment monitoring. This objective includes the development of a data analysis toolbox. The following is a summary of the technical accomplishments under this project: - A detailed literature review of various SMR types and electrical signature analysis of motor-driven systems was completed. A bibliography of literature is provided at the end of this report. Assistance was provided by ORNL in identifying some key references. - A review of literature on pump-motor modeling and digital signal processing methods was performed. - An existing flow control loop was upgraded with new instrumentation, data acquisition hardware and software. The upgrading of the experimental loop included the installation of a new submersible pump driven by a three-phase induction motor. All the sensors were calibrated before full-scale experimental runs were performed. - MATLAB-Simulink model of a three-phase induction motor and pump system was completed. The model was used to simulate normal operation and fault conditions in the motor-pump system, and to identify changes in the electrical signatures. - A simulation model of an integral PWR (iPWR) was updated and the MATLAB-Simulink model was validated for known transients. The pump-motor model was interfaced with the iPWR model for testing the impact of primary flow perturbations (upsets) on

  17. Reports within the area of nuclear power plant instrumentation: Part 1: Laboratory test of analogue and digital instrument components. Part 2: Dynamic deviations in reactor pressure water level signals caused by sensing lines

    Energy Technology Data Exchange (ETDEWEB)

    Bergdahl, Bengt-Goeran [GSE Power Systems AB, Nykoeping (Sweden)

    2004-11-01

    Reliable measurement signals are of great importance for the safety of a nuclear power plant. The measurement signals are used as input signals to the automatic control systems, they have influence on the reactor protection system and they are the input to the information presented in the control room. Measurement signals are also the basis for analysis of sampled signals after an event. These facts imply that it is important that the measurement data represent physical magnitudes in a correct manner. This holds true both for the static and the dynamic part of the signal. Mainly depending on the fact that the Swedish BWRs were constructed m the seventies and eighties, the instrument systems were originally designed with analogue technique. This is valid for transmitters as well as density converters, isolation amplifiers and controllers. Right now there is an ongoing modernization of the instrument systems in many plants. Old analogue components are in many cases replaced by new digital ones. The delay time is the critical dynamic deviation between an analogue and a digital transmitter. A delay time of up to 200 ms has been observed for a digital transmitter (Hartmann and Braun ASK800) in comparison with an analogue one (Fujii). A long delay time is of course undesirable when the transmitter is a part of the reactor protection system. It is therefore important to pay attention to the delay in response when an analogue transmitter is replaced by a digital one. The laboratory tests also included a comparison between an old analogue density converter (Hartmann and Braun TZA2) and a new digital one (Hartmann and Braun TZA4). These results prove that the analogue unit is faster than the digital. The response time from differential pressure to level signal was 50 ms for TZA2 and 250 ms for TZA4. Corresponding times with pressure as input and level as output was 50 ms for TZA2 and 900 ms for TZA4. The report also includes an investigation of pressure transmitters of the

  18. Effect of scattered feeding and feeding twice a day during rearing on indicators of hunger and frustration in broiler breeders

    NARCIS (Netherlands)

    Jong, de I.C.; Wolthuis-Fillerup, M.; Blokhuis, H.J.

    2005-01-01

    Broiler breeders are routinely fed restricted during rearing which has a major negative effect on their welfare. They suffer from hunger and frustration from thwarting of feeding. The aim of this experiment was therefore to study if broiler breeder welfare can be improved by changes in the feeding

  19. The Effect of Low-Density Diets on Broiler Breeder Development and Nutrient Digestibility During the Rearing Period

    NARCIS (Netherlands)

    Enting, H.; Veldman, A.; Verstegen, M.W.A.; Aar, van de P.J.

    2007-01-01

    Low-density diets might help to reduce hunger feeling in restricted-fed broiler breeders. Effects of low-density diets on nutrient digestibility and bird development were studied in Cobb 500 broiler breeder hens from 4 wk of age until the onset of the lay (wk 26). The experiment included 4

  20. Nuclear reactor neutron shielding

    Science.gov (United States)

    Speaker, Daniel P; Neeley, Gary W; Inman, James B

    2017-09-12

    A nuclear reactor includes a reactor pressure vessel and a nuclear reactor core comprising fissile material disposed in a lower portion of the reactor pressure vessel. The lower portion of the reactor pressure vessel is disposed in a reactor cavity. An annular neutron stop is located at an elevation above the uppermost elevation of the nuclear reactor core. The annular neutron stop comprises neutron absorbing material filling an annular gap between the reactor pressure vessel and the wall of the reactor cavity. The annular neutron stop may comprise an outer neutron stop ring attached to the wall of the reactor cavity, and an inner neutron stop ring attached to the reactor pressure vessel. An excore instrument guide tube penetrates through the annular neutron stop, and a neutron plug comprising neutron absorbing material is disposed in the tube at the penetration through the neutron stop.

  1. Status report. KfK contribution to the development of DEMO-relevant test blankets for NET/ITER. Pt. 1: Self-cooled liquid metal breeder blanket. Vol. 1. Summary

    Energy Technology Data Exchange (ETDEWEB)

    Malang, S.; Reimann, J.; Sebening, H. [comps.; Barleon, L.; Bogusch, E.; Bojarsky, E.; Borgstedt, H.U.; Buehler, L.; Casal, V.; Deckers, H.; Feuerstein, H.; Fischer, U.; Frees, G.; Graebner, H.; John, H.; Jordan, T.; Kramer, W.; Krieg, R.; Lenhart, L.; Malang, S.; Meyder, R.; Norajitra, P.; Reimann, J.; Schwenk-Ferrero, A.; Schnauder, H.; Stieglitz, R.; Oschinski, J.; Wiegner, E.

    1991-12-01

    A self-cooled liquid metal breeder blanket for a fusion DEMO-reactor and the status of the development programme is described as a part of the European development programme of DEMO relevant test blankets for NET/ITER. Volume 1 (KfK 4907) contains a summary, Volume 2 (KfK 4908) a more detailed version of the report. Both volumes contain sections on previous studies on self-cooled liquid metal breeder blankets, the reference blanket design for a DEMO-reactor, a typical test blanket design including the ancillary loop system and the building requirements for NET/ITER together with the present status of the associated R and D-programme in the fields of neutronics, magnetohydrodynamics, tritium removal and recovery, liquid metal compatibility and purification, ancillary loop system, safety and reliability. An outlook is given regarding the required R and D-programme for the self-cooled liquid metal breeder blanket prior to tests in NET/ITER and the relevant test programme to be performed in NET/ITER. (orig.). [Deutsch] Ein selbstgekuehltes Fluessigmetall-Brutblanket fuer einen DEMO Fusionsreaktor und der Stand der Entwicklungsarbeiten, als Teil des Europaeischen Entwicklungsprogramms fuer ein DEMO-relevantes Testblanket fuer NET/ITER werden beschrieben. Band 1 (KfK 4907) enthaelt die Zusammenfassung und Band 2 (KfK 4708) den detaillierten Bericht. In den beiden Berichten werden bisher durchgefuehrte Untersuchungen fuer selbstgekuehlte Fluessigmetallbrutblankets beschrieben. Es werden der Referenzentwurf fuer das DEMO-Reaktorblanket und ein typischer Entwurf fuer ein Testblanket in NET/ITER mit den dazugehoerigen externen Kreislaeufen und einem Komponentenaufstellungsplan vorgestellt. Der augenblickliche Stand der Forschungs- und Entwicklungsarbeiten bezueglich: Neutronenrechnungen, Magnetohydrodynamik (MHD), Tritiumgewinnung, Bestaendigkeit im Fluessigmetall, Fluessigmetallreinigung sowie Sicherheit und Zuverlaessigkeit der Kreislaeufe wird aufgezeigt. Es wird ein

  2. Status report. KfK contribution to the development of DEMO-relevant test blankets for NET/ITER. Pt. 1: Self-cooled liquid metal breeder blanket. Vol. 2. Detailed version

    Energy Technology Data Exchange (ETDEWEB)

    John, H.; Malang, S.; Sebening, H. [comps.; Barleon, L.; Bojarsky, E.; Borgstedt, H.U.; Buehler, L.; Casal, V.; Deckers, H.; Feuerstein, H.; Fischer, U.; Frees, G.; Graebner, H.; John, H.; Jordan, T.; Kramer, W.; Krieg, R.; Lenhart, L.; Meyder, R.; Norajitra, P.; Reiser, H.; Reimann, J.; Schwenk-Ferrero, A.; Schnauder, H.; Stieglitz, R.; Oschinski, J.; Wiegner, E. [Kernforschungszentrum Karlsruhe GmbH (Germany). Projekt Kernfusion; Bogusch, E. [Interatom GmbH, Bergisch Gladbach (Germany)

    1991-12-01

    A self-cooled liquid metal breeder blanket for a fusion DEMO-reactor and the status of the development programme is described as a part of the European development programme of DEMO relevant test blankets for NET/ITER. Volume 1 (KfK 4907) contains a summary. Volume 2 (KfK 4908) a more detailed version of the report. Both volumes contain sections on previous studies on self-cooled liquid metal breeder blankets, the reference blanket design for a DEMO-reactor, a typical test blanket design including the ancillary loop system and the building requirements for NET/ITER together with the present status of the associated RandD-programme in the fields of neutronics, magnetohydrodynamics, tritium removal and recovery, liquid metal compatibility and purification, ancillary loop system, safety and reliability. An outlook is given regarding the required RandD-programme for the self-cooled liquid metal breeder blanket prior to tests in NET/ITER and the relevant test programme to be performed in NET/ITER. (orig.). [Deutsch] Ein selbstgekuehltes Fluessigmetall-Brutblanket fuer einen DEMO Fusionsreaktor und der Stand der Entwicklungsarbeiten, als Teil des Europaeischen Entwicklungsprogramms fuer ein DEMO-relevantes Testblanket fuer NET/ITER werden beschrieben. Band 1 (KfK 4907) enthaelt die Zusammenfassung und Band 2 (KfK 4708) den detaillierten Bericht. In den beiden Berichten werden bisher durchgefuehrte Untersuchungen fuer selbstgekuehlte Fluessigmetallbrutblankets beschrieben. Es werden der Referenzentwurf fuer das DEMO-Reaktorblanket und ein typischer Entwurf fuer ein Testblanket in NET/ITER mit den dazugehoerigen externen Kreislaeufen und einem Komponentenaufstellungsplan vorgestellt. Der augenblickliche Stand der Forschungs- und Entwicklungsarbeiten bezueglich: Neutronenrechnungen, Magnetohydrodynamik (MHD), Tritiumgewinnung, Bestaendigkeit im Fluessigmetall, Fluessigmetallreinigung und Sicherheit und Zuverlaessigkeit der Kreislaeufe wird aufgezeigt. Es wird ein Ausblick

  3. Economics and utilization of thorium in nuclear reactors. Technical annexes 1 and 2

    Energy Technology Data Exchange (ETDEWEB)

    1978-05-01

    An assessment of the impact of utilizing the /sup 233/U/thorium fuel cycle in the U.S. nuclear economy is strongly dependent upon several decisions involving nuclear energy policy. These decisions include: (1) to recycle or not recycle fissile material; (2) if fissile material is recycled, to recycle plutonium, /sup 233/U, or both; and (3) to deploy or not to deploy advanced reactor designs such as Fast Breeder Reactors (FBR's), High Temperature Gas Reactors (HTGR's), and Canadian Deuterium Uranium Reactors (CANDU's). This report examines the role of thorium in the context of the above policy decisions while focusing special attention on economics and resource utilization.

  4. The reactor ALLEGRO and the sustainable nuclear energy in Central Europe

    Directory of Open Access Journals (Sweden)

    Gadó János

    2014-01-01

    Full Text Available The Visegrád-4 countries (CZ, HU, PL and SK would like to use nuclear energy on the long run. The construction of new Generation 3+ nuclear units probably belong in each country to this realm. These reactors will provide safe and cheap electric energy approximately until the end of the 21st century. In order to use nuclear energy in the 22nd century, sustainability of fuel supply shall be achieved by applying Generation 4 breeder reactors with fast spectrum. The corresponding research and development is organized now in the framework of the V4G4 Centre of Excellence establshed by the nuclear research institutes of the region with a strong technical support from the French CEA. The most important milestone of these efforts is the start-up of the ALLEGRO reactor that shall demonstrate the viability of the gas cooled fast reactor technology.

  5. In-reactor creep behavior of selected ferritic alloys

    Energy Technology Data Exchange (ETDEWEB)

    Puigh, R.J.; Wire, G.L.

    1983-01-01

    An experiment was conducted in the Experimental Breeder Reactor-II (EBR-II) to investigate the in-reactor creep behavior of selected ferritic alloys. Pressurized tube creep specimens fabricated from the following ferritic alloys: HT-9, 9Cr-2Mo, and 2-1/4Cr-1Mo, were irradiated in EBR-II to a peak fluence of 2.8 x 10/sup 22/ n/cm/sup 2/ (E > 0.1 MeV) and at irradiation temperatures of 443, 505 and 572/sup 0/C. Each alloy had four specimens with midwall hoop stresses of 0, 50, 75 and 100 MPa at each irradiation temperature. Measurements of the zero-stressed specimens indicate that none of the ferritic alloys are exhibiting evidence for swelling or phase transformations at these irradiation temperatures and at a fluence of 2.8 x 10/sup 22/ n/cm/sup 2/ (E > 0.1 MeV).

  6. The Role of Feeding Regimens in Regulating Metabolism of Sexually Mature Broiler Breeders

    Science.gov (United States)

    A trial was conducted to determine the effects of different rearing feed regimens on plasma hormone and metabolite levels and hepatic lipid metabolism and gene expression on sexually mature broiler breeders. Cobb 500 birds were divided into two groups at 4 weeks of age and fed either everyday (ED) ...

  7. Effects of breeder age and pre-incubation storage of eggs on ...

    African Journals Online (AJOL)

    Two thousand four hundred quail (Coturnix coturnix japonica) hatching eggs were used to determine the effects of breeder age and pre-incubation storage time on egg traits, hatching traits and the growth of some selected organs in newly hatched chicks. Eggs from two non-commercial flocks (aged 10 vs. 40 weeks) of the ...

  8. Perch use by broiler breeders and its implication on health and production.

    Science.gov (United States)

    Gebhardt-Henrich, S G; Toscano, M J; Würbel, H

    2017-10-01

    Broiler breeders are commonly kept without perches, although perching has been shown to be a high-priority behavior in laying hens. We studied whether broiler breeders used elevated perches of different lengths during the night and how access to perches affected health and production. Using the Ross 308 hybrid, pens offering 4 different perch spaces per bird (5, 10, 14, and 20 cm) in a cross-over design were compared with pens without perches. The number of birds on perches at midnight were recorded 7 times during production. Prevalence of keel bone fractures, breast blisters, pododermatitis, and plumage quality of hens was assessed at 45 wk, and production was monitored daily. To determine subsequent effects on offspring, chicks from hens with and without perches were reared and their growth rate was assessed. Analysis found more broiler breeders perched at night when 14 cm perch length per bird was provided than with less available perch length (P = 0.0005), but there was no difference between 14 and 20 cm per bird. Perch use declined with age from about 50 to 20% (P growth of chicks was not affected by the parent treatment. In conclusion, our results suggest that perches were chosen for roosting by broiler breeders depending on their age and did not impair production. © 2017 Poultry Science Association Inc.

  9. Effect of low-density diets on broiler breeder and offspring performance

    NARCIS (Netherlands)

    Enting, H.

    2005-01-01

    Restricted feeding of broiler breeders is required to obtain good reproductive performance. Current practical feed restriction levels can result in hunger feeling and chronic stress, particularly during the rearing period. On the basis of literature data, low-density diets might improve bird

  10. Effects of restricted feeding on physiological stress parameters in growing broiler breeders

    NARCIS (Netherlands)

    Jong, de I.C.; Voorst, van S.; Ehlhardt, D.A.; Blokhuis, H.J.

    2002-01-01

    In previous studies, a lack of agreement in measurements of plasma corticosterone concentrations and heterophil:lymphocyte (H/L) ratio as physiological indices of stress, caused by hunger and frustration in restricted-fed broiler breeders, was observed. It could be suggested that the differences

  11. Do Low-Density Diets Improve Broiler Breeder Welfare During Rearing and Laying.

    NARCIS (Netherlands)

    Jong, de I.C.; Enting, H.; Voorst, van A.; Blokhuis, H.J.

    2005-01-01

    Low-density diets may improve welfare of restricted fed broiler breeders by increasing feed intake time with less frustration of feed intake behavior as a result. Moreover, low-density diets may promote satiety through a more filled gastrointestinal tract, and thus feelings of hunger may be reduced.

  12. A model for an economically optimal replacement of a breeder flock

    NARCIS (Netherlands)

    Yassin, H.; Velthuis, A.G.J.; Giesen, G.W.J.; Oude Lansink, A.G.J.M.

    2012-01-01

    A deterministic model is developed to support the tactical and operational replacement decisions at broiler breeder farms. The marginal net revenue approach is applied to determine the optimal replacement age of a flock. The objective function of the model maximizes the annual gross margin over the

  13. Comparative analysis as a management tool for broiler breeder farms: simulated individual farm analysis (IFAS)

    NARCIS (Netherlands)

    Yassin, H.; Velthuis, A.G.J.; Giesen, G.W.J.; Oude Lansink, A.G.J.M.

    2012-01-01

    The objective of this study was to develop a management information system to evaluate the tactical management of a breeder flock using individual farm analysis with a deterministic simulation model (IFAS). Individual farm analysis is a method that evaluates the performance of individual farms by

  14. Harvest and group effects on pup survival in a cooperative breeder

    Science.gov (United States)

    Ausband, David E.; Mitchell, Michael S.; Stansbury, Carisa R.; Stenglein, Jennifer L.; Waits, Lisette P.

    2017-01-01

    Recruitment in cooperative breeders can be negatively affected by changes in group size and composition. The majority of cooperative breeding studies have not evaluated human harvest; therefore, the effects of recurring annual harvest and group characteristics on survival of young are poorly understood. We evaluated how harvest and groups affect pup survival using genetic sampling and pedigrees for grey wolves in North America. We hypothesized that harvest reduces pup survival because of (i) reduced group size, (ii) increased breeder turnover and/or (iii) reduced number of female helpers. Alternatively, harvest may increase pup survival possibly due to increased per capita food availability or it could be compensatory with other forms of mortality. Harvest appeared to be additive because it reduced both pup survival and group size. In addition to harvest, turnover of breeding males and the presence of older, non-breeding males also reduced pup survival. Large groups and breeder stability increased pup survival when there was harvest, however. Inferences about the effect of harvest on recruitment require knowledge of harvest rate of young as well as the indirect effects associated with changes in group size and composition, as we show. The number of young harvested is a poor measure of the effect of harvest on recruitment in cooperative breeders.

  15. Effects of high fibre diets on gut fill, behaviour and productivity in broiler breeders

    DEFF Research Database (Denmark)

    Steenfeldt, Sanna; Nielsen, Birte Lindstrøm

    , and the higher water content of their litter may have affected their thermoregulation. In exp. II, four diets based on different fibre sources were given to broiler breeders from day 12 to 19 weeks of age to increase feed quantity. Diet A (commercial control diet: 10.7MJ/kg), B (42% dietary fibre (DF); 7.25MJ...

  16. The effect of age at photostimulation of male broiler breeders on ...

    African Journals Online (AJOL)

    Male broiler breeders were photostimulated at different ages (56, 77, 98, 119, 147 and 161 d) during the period of growth prior to achieving sexual maturity to observe their response to photoperiod stimulation. Birds were sampled at regular intervals to measure the average testis weight - these values responding ...

  17. Biofilm carrier migration model describes reactor performance.

    Science.gov (United States)

    Boltz, Joshua P; Johnson, Bruce R; Takács, Imre; Daigger, Glen T; Morgenroth, Eberhard; Brockmann, Doris; Kovács, Róbert; Calhoun, Jason M; Choubert, Jean-Marc; Derlon, Nicolas

    2017-06-01

    The accuracy of a biofilm reactor model depends on the extent to which physical system conditions (particularly bulk-liquid hydrodynamics and their influence on biofilm dynamics) deviate from the ideal conditions upon which the model is based. It follows that an improved capacity to model a biofilm reactor does not necessarily rely on an improved biofilm model, but does rely on an improved mathematical description of the biofilm reactor and its components. Existing biofilm reactor models typically include a one-dimensional biofilm model, a process (biokinetic and stoichiometric) model, and a continuous flow stirred tank reactor (CFSTR) mass balance that [when organizing CFSTRs in series] creates a pseudo two-dimensional (2-D) model of bulk-liquid hydrodynamics approaching plug flow. In such a biofilm reactor model, the user-defined biofilm area is specified for each CFSTR; thereby, Xcarrier does not exit the boundaries of the CFSTR to which they are assigned or exchange boundaries with other CFSTRs in the series. The error introduced by this pseudo 2-D biofilm reactor modeling approach may adversely affect model results and limit model-user capacity to accurately calibrate a model. This paper presents a new sub-model that describes the migration of Xcarrier and associated biofilms, and evaluates the impact that Xcarrier migration and axial dispersion has on simulated system performance. Relevance of the new biofilm reactor model to engineering situations is discussed by applying it to known biofilm reactor types and operational conditions.

  18. Synfuel production in nuclear reactors

    Science.gov (United States)

    Henning, C.D.

    Apparatus and method for producing synthetic fuels and synthetic fuel components by using a neutron source as the energy source, such as a fusion reactor. Neutron absorbers are disposed inside a reaction pipe and are heated by capturing neutrons from the neutron source. Synthetic fuel feedstock is then placed into contact with the heated neutron absorbers. The feedstock is heated and dissociates into its constituent synfuel components, or alternatively is at least preheated sufficiently to use in a subsequent electrolysis process to produce synthetic fuels and synthetic fuel components.

  19. Intestinal spirochaetes (Brachyspira spp.) colonizing flocks of layer and breeder chickens in Malaysia.

    Science.gov (United States)

    Amin, Maswati Mat; Phillips, Nyree D; La, Tom; Robertson, Ian D; Hampson, David J

    2014-01-01

    Avian intestinal spirochaetosis causes problems including delayed onset of lay and wet litter in adult chickens, and results from colonization of the caecae/rectum with pathogenic intestinal spirochaetes (genus Brachyspira). Because avian intestinal spirochaetosis has not previously been studied in South East Asia, this investigation was undertaken in Malaysia. Faecal samples were collected from 25 farms and a questionnaire was administered. Brachyspira species were detected by polymerase chain reaction in 198 of 500 (39%) faecal samples from 20 (80%) farms, including 16 (94%) layer and four (50%) breeder farms. Pathogenic Brachyspira pilosicoli was identified in five (29%) layer and two (25%) breeder farms whilst pathogenic Brachyspira intermedia was detected in nine (53%) layer and one (12.5%) of the breeder farms. Twelve (80%) layer farms had egg production problems and 11 (92%) were positive for Brachyspira: three (25%) for B. pilosicoli and six (50%) for B. intermedia. Of three breeder farms with egg production problems, one was colonized with B. pilosicoli. Three of ten layer farms with wet litter were positive for B. pilosicoli and six for B. intermedia. Of four breeder farms with wet litter, one was colonized with B. pilosicoli and one with B. intermedia. No significant associations were found between colonization and reduced egg production or wet litter, perhaps because so many flocks were colonized. A significant association (P = 0.041) occurred between a high prevalence of colonization and faecal staining of eggs. There were significant positive associations between open-sided housing (P = 0.006), and flocks aged >40 weeks (P colonization by pathogenic species.

  20. Measuring motivation for appetitive behaviour: food-restricted broiler breeder chickens cross a water barrier to forage in an area of wood shavings without food.

    Science.gov (United States)

    Dixon, Laura M; Brocklehurst, Sarah; Sandilands, Vicky; Bateson, Melissa; Tolkamp, Bert J; D'Eath, Rick B

    2014-01-01

    Broiler breeders (parents of meat chickens) are selected for fast growth and become obese if fed ad libitum. To avoid this and maintain good health and reproductive ability, they are feed restricted to about 1/3 of what they would eat ad libitum. As a result, they experience chronic hunger and exhibit abnormal behaviour patterns that may indicate stress and frustration. One approach to measuring hunger is to observe how much birds will work, such as pecking a key, for access to more or different types of food. However, the sight, smell, and feedback from consumption of the feed reward changes the context and may artificially raise feeding motivation. To avoid this, we tested broiler breeders in an apparatus in which they could work for access to a wooden platform covered in wood shavings by crossing a water runway which increased in length and depth in 8 successive tests. In the wood shavings area, they could perform exploratory and foraging behaviour (the appetitive phase of feeding) but were never rewarded with feed. Sixty birds were divided into three feed quantity treatments: commercial restriction (R), and twice (2R) or three times (3R) this amount. Overall, birds fed R worked harder to reach the wood shavings area (reached it in a larger number of tests) than 2R and 3R birds (P2R>3R). This indicates that restricted-fed birds were hungry and willing to work for the opportunity to forage even though food was never provided, suggesting that their motivation to perform the appetitive component of feeding behaviour (foraging/food searching) was sufficient to sustain their response. Thus food restriction in broiler breeders is a welfare concern. However these methods could be used to test alternative feeding regimes to attempt to find ways of alleviating hunger while still maintaining healthy growth and reproduction in these birds.

  1. Measuring motivation for appetitive behaviour: food-restricted broiler breeder chickens cross a water barrier to forage in an area of wood shavings without food.

    Directory of Open Access Journals (Sweden)

    Laura M Dixon

    Full Text Available Broiler breeders (parents of meat chickens are selected for fast growth and become obese if fed ad libitum. To avoid this and maintain good health and reproductive ability, they are feed restricted to about 1/3 of what they would eat ad libitum. As a result, they experience chronic hunger and exhibit abnormal behaviour patterns that may indicate stress and frustration. One approach to measuring hunger is to observe how much birds will work, such as pecking a key, for access to more or different types of food. However, the sight, smell, and feedback from consumption of the feed reward changes the context and may artificially raise feeding motivation. To avoid this, we tested broiler breeders in an apparatus in which they could work for access to a wooden platform covered in wood shavings by crossing a water runway which increased in length and depth in 8 successive tests. In the wood shavings area, they could perform exploratory and foraging behaviour (the appetitive phase of feeding but were never rewarded with feed. Sixty birds were divided into three feed quantity treatments: commercial restriction (R, and twice (2R or three times (3R this amount. Overall, birds fed R worked harder to reach the wood shavings area (reached it in a larger number of tests than 2R and 3R birds (P2R>3R. This indicates that restricted-fed birds were hungry and willing to work for the opportunity to forage even though food was never provided, suggesting that their motivation to perform the appetitive component of feeding behaviour (foraging/food searching was sufficient to sustain their response. Thus food restriction in broiler breeders is a welfare concern. However these methods could be used to test alternative feeding regimes to attempt to find ways of alleviating hunger while still maintaining healthy growth and reproduction in these birds.

  2. Photoneutron effects on pulse reactor kinetics for the Annular Core Research Reactor (ACRR).

    Energy Technology Data Exchange (ETDEWEB)

    Parma, Edward J., Jr.

    2009-06-01

    The Annular Core Research Reactor (ACRR) is a swimming-pool type pulsed reactor that maintains an epithermal neutron flux and a nine-inch diameter central dry cavity. One of its uses is neutron and gamma-ray irradiation damage studies on electronic components under transient reactor power conditions. In analyzing the experimental results, careful attention must be paid to the kinetics associated with the reactor to ensure that the transient behavior of the electronic device is understood. Since the ACRR fuel maintains a substantial amount of beryllium, copious quantities of photoneutrons are produced that can significantly alter the expected behavior of the reactor power, especially following a reactor pulse. In order to understand these photoneutron effects on the reactor kinetics, the KIFLE transient reactor-analysis code was modified to include the photoneutron groups associated with the beryllium. The time-dependent behavior of the reactor power was analyzed for small and large pulses, assuming several initial conditions including following several pulses during the day, and following a long steady-state power run. The results indicate that, for these types of initial conditions, the photoneutron contribution to the reactor pulse energy can have a few to tens of percent effect.

  3. Advanced reactor safety research. Quarterly report, April-June 1982. Volume 22

    Energy Technology Data Exchange (ETDEWEB)

    None

    1983-10-01

    Overall objective of this work is to provide NRC a comprehensive data base essential to (1) defining key safety issues, (2) understanding risk-significant accident sequences, (3) developing and verifying models used in safety assessments, and (4) assuring the public that power reactor systems will not be licensed and placed in commercial service in the United States without appropriate consideration being given to their effects on health and safety. This report describes progress in a number of activities dealing with current safety issues relevant to both light water and breeder reactors. The work includes a broad range of experiments to simulate accidental conditions to provide the required data base to understand important accident sequences and to serve as a basis for development and verification of the complex computer simulation models and codes used in accident analysis and licensing reviews. Such a program must include the development of analytical models, verified by experiment, which can be used to predict reactor and safety system performance under a broad variety of abnormal conditions. Current major emphasis is focused on providing information to NRC relevant to (1) its deliberations and decisions dealing with severe LWR accidents, and (2) its safety evaluation of the proposed Clinch River Breeder Reactor.

  4. Seismic design technology for breeder reactor structures. Volume 2. Special topics in soil/structure interaction analyses

    Energy Technology Data Exchange (ETDEWEB)

    Reddy, D.P.

    1983-04-01

    This volume is divided into six chapters: definition of seismic input ground motion, review of state-of-the-art procedures, analysis guidelines, rock/structure interaction analysis example, comparison of two- and three-dimensional analyses, and comparison of analyses using FLUSH and TRI/SAC Codes. (DLC)

  5. Amino acid requirements of broiler breeders at peak production for egg mass, body weight, and fertility.

    Science.gov (United States)

    Ekmay, R D; De Beer, M; Mei, S J; Manangi, M; Coon, C N

    2013-04-01

    Two trials were conducted to determine the amino acid and protein requirements of broiler breeders at peak production. In trial 1, 32-wk-old Cobb 500 broiler breeders with similar BW were selected to determine the digestible amino acid requirement for daily product output (g of egg mass + g of BW gain/b/d) and feed conversion (g of feed/g of product) for Met, Phe, Arg, Ile, Lys, and CP in a 42-d production study. In trial 2, 30-wk-old Cobb 500 broiler breeders were selected to determine the digestible requirement for Met, Lys, Ile, Arg, Cys, Val, Trp, and Thr in a 70-d production study. Breeders were given a corn-soy basal diet plus crystalline amino acids with 8 graded levels of amino acids (10 birds per level), representing 40 to 130% of the highest suggested requirements reported in the literature. All other amino acids were maintained at 100% of their suggested requirement level. All breeders were inseminated weekly and fertility was determined. A third trial consisted of 41-wk-old colostomized hens randomly assigned to 1 of 2 diets differing only in the amount of Ile. Urine was collected after a 6-wk feeding period. The average digestible requirements per breeder per day for both product and feed/product ratio from trials 1 and 2 for Met, Cys, TSAA, Phe, Phe + Tyr, Trp, Arg, Ile, Lys, Val, Thr, and CP were 424, 477, 901, 689, 997, 252, 1,026, 830, 916, 799, 613 mg/d, and 20.0 g/d, respectively. The ideal profile for digestible Met, Cys, TSAA, Phe, Phe + Tyr, Trp, Arg, Ile, Lys, Val, and Thr was 46, 52, 98, 76, 108, 28, 112.0, 91, 100.0, 87, and 67%, respectively. A significant decrease in fertility was noted with increasing levels of Ile and Lys. Urine pH was significantly more alkaline in hens fed the higher level of Ile. It is suggested that adequate dietary Lys and Ile should be provided for maximum hatching egg production but an excess may affect fertility.

  6. Q Fever (Coxiella burnetii) Knowledge and Attitudes of Australian Cat Breeders and Their Husbandry Practices.

    Science.gov (United States)

    Shapiro, A J; Norris, J M; Bosward, K L; Heller, J

    2017-06-01

    A Q fever outbreak in a small animal veterinary hospital, associated with a cat caesarean section, initiated a cat seroprevalence study (n = 712) that found circulating antibodies to Coxiella burnetii was highest in cattery-confined breeding cats (9.3%). These findings stimulated interest about potential sources of C. burnetii infection for cats and humans associated with cats. Cat breeders are potentially a group at increased risk of C. burnetii infection, and this study sought to identify potential risk factors. A cross-sectional online survey was conducted targeting all domestic cat breeders registered with an affiliate member body in Australia in 2015. Responses from 177 cat breeders across Australia were analysed. Forty per cent of responding cat breeders had not heard of Q fever. Raw meat was fed as an integral constituent of the diet by 89% of respondents. Eighty per cent of respondents allowed queens access to the home for parturition, and assistance of queens and resuscitation of kittens at the time of birth were reported by 97% of respondents. Respondents who perceived some level of exposure to Q fever through their breeding activities were three times less likely to perform mouth-to-snout resuscitation (OR 0.3 95% CI 0.1-0.9; P = 0.034) than those who did not perceive a risk of exposure. Similarly, respondents who perceived Q fever as a risk through breeding activities were close to eight times more likely to use personal protective equipment during parturition (OR 7.7 95% CI 1.5-39.9; P = 0.015) than those who did not. Husbandry practices of cat breeders that may increase the risk of C. burnetii transmission require further targeted investigations to assess the contribution of these risk factors to the acquisition of disease. Concurrent education forums are recommended to inform Australian cat breeders of the aetiopathogenesis of Q fever. © 2016 Blackwell Verlag GmbH.

  7. Gel-sphere-pac reactor fuel fabrication and its application to a variety of fuels

    Energy Technology Data Exchange (ETDEWEB)

    Olsen, A.R.; Judkins, R.R. (comps.)

    1979-12-01

    The gel-sphere-pac fuel fabrication option was evaluated for its possible application to commercial scale fuel fabrication for 19 fuel element designs that use oxide fuel in metal clad rods. The dry gel spheres are prepared at the reprocessing plant and are then calcined, sintered, inspected, and loaded into fuel rods and packed by low-energy vibration. A fuel smear density of 83 to 88% theoretical can be obtained. All fuel fabrication process steps were defined and evaluated from fuel receiving to finished fuel element shipping. The evaluation also covers the feasibility of the process, the current status of technology, estimates of the required time and cost to develop the technology to commercial status, and the safety and licensability of commercial scale plants. The primary evaluation was for a Light-Water Reactor fuel element containing (U,Pu)O/sub 2/ fuel. The other 18 fuel element types - 3 for Light-Water Reactors, 1 for a Heavy-Water Reactor, 1 for a Gas-Cooled Fast Reactor, 7 for Liquid-Metal-Cooled Fast Breeder Reactors, and 3 pairs for Light-Water Prebreeder and Breeder Reactors - were compared with the Light-Water Reactor. The gel-sphere-pac option was found applicable to 17 of the 19 element types; the characteristics of a commercial scale plant were defined for these for making cost estimates for such plants. The evaluation clearly shows the gel-sphere-pac process to be a viable fuel fabrication option. Estimates indicate a significant potential fabrication cost advantage for the gel-sphere-pac process if a remotely operated and remotely maintained fuel fabrication plant is required.

  8. A study of reactor vessel integrity assessment

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jae Hoon [Korea Institute of Nuclear Safety, Taejon (Korea, Republic of); Kim, Jong Kyung; Shin, Chang Ho; Seo, Bo Kyun [Hanyang Univ., Seoul (Korea, Republic of)

    1999-02-15

    The fast neutron fluence at the Reactor Pressure Vessel(RPV) of KNGR designed for 60 years lifetime was calculated by full-scope Monte Carlo simulation for reactor vessel integrity assessment. KNGR core geometry was modeled on a three-dimensional representation of the one-sixteenth of the reactor in-vessel component. Each fuel assemblies were modeled explicitly, and each fuel pins were axially divided into 5 segments. The maximum flux of 4.3 x 10{sup 10} neutrons/cm{sup 2}. sec at the RPV was obtained by tallying neutrons crossing the beltline of inner surface of the RPV.

  9. Reactor safeguards against insider sabotage

    Energy Technology Data Exchange (ETDEWEB)

    Bennett, H.A.

    1982-03-01

    A conceptual safeguards system is structured to show how both reactor operations and physical protection resources could be integrated to prevent release of radioactive material caused by insider sabotage. Operational recovery capabilities are addressed from the viewpoint of both detection of and response to disabled components. Physical protection capabilities for preventing insider sabotage through the application of work rules are analyzed. Recommendations for further development of safeguards system structures, operational recovery, and sabotage prevention are suggested.

  10. Physics of reactor safety. Quarterly report, April--June 1977. [LMFBR

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-09-01

    The work in the Applied Physics Division includes reports on reactor safety program by members of the Reactor Safety Appraisals Group, Monte Carlo analysis of safety-related critical assembly experiments by members of the Theoretical Fast Reactor Physics Group, and planning of safety-related critical experiments by members of the Zero Power Reactor (ZPR) Planning and Experiments Group. Work on Reactor core thermal-hydraulic code development performed in the Components Technology Division is also included in the report.

  11. Behavior of spent nuclear fuel and storage system components in dry interim storage. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, A.B. Jr.; Gilbert, E.R.; Guenther, R.J.

    1983-02-01

    Irradiated nuclear fuel has been handled under dry conditions since the early days of nuclear reactor operation, and use of dry storage facilities for extended management of irradiated fuel began in 1964. Irradiated fuel is currently being stored dry in four types of facilities: dry wells, vaults, silos, and metal casks. Essentially all types of irradiated nuclear fuel are currently stored under dry conditions. Gas-cooled reactor (GCR) and liquid metal fast breeder reactor (LMFBR) fuels are stored in vaults and dry wells. Certain types of fuel are being stored in licensed dry storage facilities: Magnox fuel in vaults in the United Kingdom; organic-cooled reactor (OCR) fuel (clad with a zirconium alloy) in silos in Canada; and boiling water reactor (BWR) fuel (clad with Zircaloy) in a metal storage cask in Germany. Dry storage demonstrations are under way for Zircaloy-clad fuel from BWRs, pressurized heavy-water reactors (PHWRs), and pressurized water reactors (PWRs) in all four types of dry storage facilities. The demonstrations and related hot cell and laboratory tests are directed toward expanding the data base and establishing a licensing basis for dry storage of water reactor fuel. This report reviews the scope of dry interim storage technology, the performance of fuel and facility materials, the status of programs in several countries to license dry storage of water reactor fuel, and the characteristics of water reactor fuel that relate to dry storage conditions. 110 refs., 22 figs., 28 tabs.

  12. Behavior of actinides in the Integral Fast Reactor fuel cycle

    Energy Technology Data Exchange (ETDEWEB)

    Courtney, J.C. [Louisiana State Univ., Baton Rouge, LA (United States). Nuclear Science Center; Lineberry, M.J. [Argonne National Lab., Idaho Falls, ID (United States). Technology Development Div.

    1994-06-01

    The Integral Fast Reactor (IFR) under development by Argonne National Laboratory uses metallic fuels instead of ceramics. This allows electrorefining of spent fuels and presents opportunities for recycling minor actinide elements. Four minor actinides ({sup 237}Np, {sup 240}Pu, {sup 241}Am, and {sup 243}Am) determine the waste storage requirements of spent fuel from all types of fission reactors. These nuclides behave the same as uranium and other plutonium isotopes in electrorefining, so they can be recycled back to the reactor without elaborate chemical processing. An experiment has been designed to demonstrate the effectiveness of the high-energy neutron spectra of the IFR in consuming these four nuclides and plutonium. Eighteen sets of seven actinide and five light metal targets have been selected for ten day exposure in the Experimental Breeder Reactor-2 which serves as a prototype of the IFR. Post-irradiation analyses of the exposed targets by gamma, alpha, and mass spectroscopy are used to determine nuclear reaction-rates and neutron spectra. These experimental data increase the authors` confidence in their ability to predict reaction rates in candidate IFR designs using a variety of neutron transport and diffusion programs.

  13. Evaluation of the efficacy of an autogenous Escherichia coli vaccine in broiler breeders

    DEFF Research Database (Denmark)

    Li, Lili; Thøfner, Ida; Christensen, Jens Peter

    2017-01-01

    In poultry production Escherichia coli autogenous vaccines are often used. However, the efficacy of autogenous E. coli vaccinations has not been evaluated experimentally in chickens after start of lay. The aim of the present study was to evaluate the protective effect of an autogenous E. coli...... vaccine in broiler breeders. Three groups of 28 weeks old broiler breeders (unvaccinated, vaccinated once and twice, respectively) were challenged with a homologous E. coli strain (same strain as included in the vaccine) or a heterologous challenge strain in an experimental ascending model. The clinical...... outcome was most pronounced in the unvaccinated group; however, the vast majority of chickens in the vaccinated groups had severe pathological manifestations similar to findings in the unvaccinated group after challenge with a homologous as well as a heterologous E. coli strain. Although significant titer...

  14. Effect of climatic variables on production and reproduction traits of colored broiler breeder poultry.

    Science.gov (United States)

    Nayak, G D; Behura, N C; Sardar, K K; Mishra, P K

    2015-04-01

    The present study was conducted to investigate the important climatic variables affecting production and reproduction in a broiler breeder flock. The experiment was conducted for a period of 1 year on colored synthetic female line male and female poultry birds. 630 female progeny and 194 male progenies from 69 sires and 552 dams produced in four consecutive hatches at an interval of 10 days were used for the present study. Each of the seven, body weight and reproduction traits were regressed with nine environmental variables. Initially, the data were subjected to hatch effect and sire effect corrections through best linear unbiased estimator (BLUE) method and, then, multiple linear regressions of environmental variables on each trait were applied. The overall regression was significant (pvariables except maximum temperature and minimum temperature were significant (pvariables play a significant role in production and reproduction of breeder broiler poultry. Controlling these variables in adverse weathers may increase production.

  15. Brewer's Grain from Cameroon Brewery in Breeder Chicken Rations : Effect on Productive and Reproductive Performance

    Directory of Open Access Journals (Sweden)

    Mafeni, MJ.

    2001-01-01

    Full Text Available In order to evaluate the effect of brewer's dried grain (BDG on the productive and reproductive traits in breeder chickens, 120 laying hens and 12 cocks of ISA commercial breed were subjected to dietary treatments containing 0, 10, 20, and 30 % levels of BDG. Feed and water were provided ad libitum over the 5-months experimental period. Reproductive and productive traits such as egg production, egg weight, albumen height, shell weight, semen quantity fertility and hatchability of fertile eggs were measured. Results indicated that when BDG was fed at the 30 % level in the ration, the hen-day egg production (50.6 % was significantly (P of inclusion. There was a significant (P 0.05 was noticed between treatments for ratio of shell weight to egg weight, albumen height, semen quantity and fertility. The results suggest that although the 30 % level of BDG can be tolerated, the 20 %, level of BDG inclusion is more appropriate for breeder birds.

  16. Clinical outbreak of Bordetella avium infection in two turkey breeder flocks.

    Science.gov (United States)

    Kelly, B J; Ghazikhanian, G Y; Mayeda, B

    1986-01-01

    An acute upper respiratory disease was observed in two broad-breasted white (BBW) turkey primary breeder flocks. Associated clinical signs included sneezing, depression, and a deep dry cough originating from large conducting airways. Morbidity reached approximately 15-20% of the hens in an affected house. None of the turkeys died, and total feed consumption was not affected. A minimal effect upon egg production was noticed. Sera from an acutely affected flock exhibited a marked rise in titer to Bordetella avium compared with preinfection sera samples. In Case 1, B. avium was isolated in pure culture from affected birds. In Case 2, B. avium was diagnosed by serological results and clinical signs; bacteriological examination was not attempted. The findings presented here are consistent with an acute clinical outbreak of B. avium-induced turkey rhinotracheitis (turkey coryza) in BBW turkey breeder hens.

  17. Hybrid plasmachemical reactor

    Energy Technology Data Exchange (ETDEWEB)

    Lelevkin, V. M., E-mail: lelevkin44@mail.ru; Smirnova, Yu. G.; Tokarev, A. V. [Kyrgyz-Russian Slavic University (Kyrgyzstan)

    2015-04-15

    A hybrid plasmachemical reactor on the basis of a dielectric barrier discharge in a transformer is developed. The characteristics of the reactor as functions of the dielectric barrier discharge parameters are determined.

  18. Attrition reactor system

    Science.gov (United States)

    Scott, Charles D.; Davison, Brian H.

    1993-01-01

    A reactor vessel for reacting a solid particulate with a liquid reactant has a centrifugal pump in circulatory flow communication with the reactor vessel for providing particulate attrition, resulting in additional fresh surface where the reaction can occur.

  19. Guidebook to nuclear reactors

    Energy Technology Data Exchange (ETDEWEB)

    Nero, A.V. Jr.

    1976-05-01

    A general introduction to reactor physics and theory is followed by descriptions of commercial nuclear reactor types. Future directions for nuclear power are also discussed. The technical level of the material is suitable for laymen.

  20. Effects of guanidinoacetic acid diet supplementation on semen quality and fertility of broiler breeder roosters.

    Science.gov (United States)

    Tapeh, Ramin Shahabi; Zhandi, Mahdi; Zaghari, Mojtaba; Akhlaghi, Amir

    2017-02-01

    Decreased semen quality and fertility rate is a common feature in broiler breeder roosters. This decrease is associated with dysfunction of Sertoli cells and defective spermatogenesis. Guanidinoacetic acid (GAA), as a precursor of creatine, plays an important role in the proper functioning of Sertoli cells and energy metabolism in sperm. Twenty, 29-wk-old broiler breeder roosters (Ross 308) were randomly allotted to 4 treatment groups and fed diets supplemented with different levels of GAA, including 0 (GAA-0), 600 (GAA-600), 1200 (GAA-1200), and 1800 (GAA-1800) mg GAA/kg of diet for 26 successive weeks. During a 24-wk period, the seminal characteristics were weekly evaluated. At the end of experiment, sperm penetration and fertility rates were determined, using 68 artificially inseminated age-matched broiler breeder hens of the same strain (for 2 weeks). Semen concentration (P = 0.003), total sperm number (P = 0.005) and sperm forward motility (P = 0.01) were increased by GAA-1200 group. Also, sperm plasma membrane functionality was marginally affected (P = 0.06) in roosters received all levels of GAA. Sperm abnormality and plasma membrane integrity were not affected by dietary GAA. The highest number of sperm penetration holes was recorded for the GAA-1200 group (P = 0.08). Interestingly, fertility rate was increased by the feeding of all levels of GAA (P = 0.01). In conclusion, dietary GAA was associated with improvement in most of the rooster's seminal characteristics and fertility rate, suggesting a potential for using GAA to attenuate the age-related sub-fertility in commercial broiler breeder roosters. Copyright © 2016 Elsevier Inc. All rights reserved.

  1. CerealsDB 2.0: an integrated resource for plant breeders and scientists

    Directory of Open Access Journals (Sweden)

    Wilkinson Paul A

    2012-09-01

    Full Text Available Abstract Background Food security is an issue that has come under renewed scrutiny amidst concerns that substantial yield increases in cereal crops are required to feed the world’s booming population. Wheat is of fundamental importance in this regard being one of the three most important crops for both human consumption and livestock feed; however, increase in crop yields have not kept pace with the demands of a growing world population. In order to address this issue, plant breeders require new molecular tools to help them identify genes for important agronomic traits that can be introduced into elite varieties. Studies of the genome using next-generation sequencing enable the identification of molecular markers such as single nucleotide polymorphisms that may be used by breeders to identify and follow genes when breeding new varieties. The development and application of next-generation sequencing technologies has made the characterisation of SNP markers in wheat relatively cheap and straightforward. There is a growing need for the widespread dissemination of this information to plant breeders. Description CerealsDB is an online resource containing a range of genomic datasets for wheat (Triticum aestivum that will assist plant breeders and scientists to select the most appropriate markers for marker assisted selection. CerealsDB includes a database which currently contains in excess of 100,000 putative varietal SNPs, of which several thousand have been experimentally validated. In addition, CerealsDB contains databases for DArT markers and EST sequences, and links to a draft genome sequence for the wheat variety Chinese Spring. Conclusion CerealsDB is an open access website that is rapidly becoming an invaluable resource within the wheat research and plant breeding communities.

  2. Spondylitis in broiler breeder farms in West-Azerbaijan province, Iran: Clinical Report

    OpenAIRE

    Talebi, Alireza; Taifebagherlu, Jafar; Sharifi, Arian; Delkhosh-Kasmaie, Fatemeh

    2016-01-01

    Spondylitis is a reemerging epidemic spinal infection in male broiler chickens (5 to 7 weeks of age) as well as broiler breeder roosters (15 to 18 weeks of age). Among various causative agents, Enterococcus species and in particular E. cecorum, a gram-positive bacterium as a gastrointestinal flora of birds, have mostly been isolated. On late September 2015, a number of 10 weeks old roosters with characteristic clinical signs of lameness and hock-sitting posture were autopsied. During thorough...

  3. Effects of breeder age, strain, and eggshell temperature on nutrient metabolism of broiler embryos.

    Science.gov (United States)

    Nangsuay, A; Meijerhof, R; van den Anker, I; Heetkamp, M J W; Kemp, B; van den Brand, H

    2017-06-01

    Breeder age and broiler strain influence the availability of nutrients and oxygen through yolk size and eggshell conductance, and the effects of these egg characteristics on nutrient metabolism might be influenced by eggshell temperature (EST). This study aims to determine effects of breeder age, strain, and EST on nutrient metabolism of embryos. A study was designed as a 2 × 2 × 2 factorial arrangement using four batches of in total 4,464 hatching eggs of 2 flock ages at 29 to 30 wk (young) and 54 to 55 wk (old) of Ross 308 and Cobb 500. EST of 37.8 (normal) or 38.9°C (high) was applied from incubation day 7 (E7) until hatching. Wet yolk weight was determined mainly by breeder age (P = 0.043). Energy content in yolk (P = 0.004) and albumen + yolk (P = 0.005) were higher in old flock eggs than in young flock eggs, but did not differ between broiler strains. Eggshell conductance was higher in Ross 308 eggs than in Cobb 500 eggs (P availability of oxygen could have contributed to these differences. © 2016 Poultry Science Association Inc.

  4. Attitude of broiler breeders toward the production of antibiotics-free chickens (case study: Tehran province

    Directory of Open Access Journals (Sweden)

    A Behrouzi

    2016-01-01

    Full Text Available Abstract: This research aimed to investigate the attitude of broiler breeders toward the production of antibiotics-free chickens in Tehran province. The statistical population in this study included all broiler breeders (N=450 in Tehran province. Using stratified-random-sampling method 136 breeders were selected. The main tool for data gathering was a questionnaire contained 44 questions and items. Results showed that 52.9% of the respondents had “positive” or “relatively positive” viewpoints about the production of antibiotic-free chicken. The results also indicated that there were a significant (p < 0.05 positive relationship between the attitude of  production of antibiotic-free chicken with the education level, job satisfaction, second job as well as having technical supervisor. Moreover, a significant (p < 0.01 positive relationship was observed between the participation in training courses related to the production of antibiotic-free chicken and the viewpoint of studied broiler producers. On the other hand, no significant correlation was observed between the “viewpoint of chicken producers” and the variables such as: “age”, “job background”, “frequency of progeny”, “production/non-production of antibiotic-free chicken”, “consumption/non-consumption of antibiotic-free chicken” and “knowledge on breeding the antibiotic-free chicken”.

  5. High Performance Charge Breeder for HIE-ISOLDE and TSR@ISOLDE Applications

    CERN Document Server

    Shornikov, Andrey; Mertzig, Robert C.; Pikin, Alexander; Wenander, Fredrik J.C.

    2015-01-01

    We report on the development of the HEC2 (High Energy Compression and Current) charge breeder, a possible high performance successor to REXEBIS at ISOLDE. The new breeder would match the performance of the HIE-ISOLDE linac upgrade and make full use of the possible installation of a storage ring at ISOLDE (the TSR@ISOLDE initiative [1]). Dictated by ion beam acceptance and capacity requirements, the breeder features a 2-3.5 A electron beam. In many cases very high charge states, including bare ions up to Z=70 and Li/Na-like up to Z=92 could be requested for experiments in the storage ring, therefore, electron beam energies up to 150 keV are required. The electron-beam current density needed for producing ions with such high charge states at an injection rate into TSR of 0.5-1 Hz is between 10 and 20 kA/cm2, which agrees with the current density needed to produce A/q<4.5 ions for the HIE-ISOLDE linac with a maximum repetition rate of 100 Hz. The first operation of a prototype electron gun with a pulsed elect...

  6. Design of the low energy beam transport line between CARIBU and the EBIS charge breeder

    Energy Technology Data Exchange (ETDEWEB)

    Perry, A., E-mail: aperry4@hawk.iit.edu [Argonne National Laboratory, Argonne, IL 60439, USA and Illinois Institute of Technology, Chicago, IL 60616 (United States); Ostroumov, P. N.; Barcikowski, A.; Dickerson, C.; Kondrashev, S. A.; Mustapha, B.; Savard, G. [Argonne National Laboratory, Argonne, IL 60439 (United States)

    2015-01-09

    An Electron Beam Ion Source Charge Breeder (EBIS-CB) has been developed to breed radioactive beams from the CAlifornium Rare Isotope Breeder Upgrade (CARIBU) facility at ATLAS. The EBIS-CB will replace the existing ECR charge breeder to increase the intensity and improve the purity of reaccelerated radioactive ion beams. The EBIS-CB is in the final stage of off-line commissioning. Currently, we are developing a low energy beam transport (LEBT) system to transfer CARIBU beams to the EBIS-CB. As was originally planned, an RFQ cooler-buncher will precede the EBIS-CB. Recently, it was decided to include a multi-reflection time-of-flight (MR-TOF) mass-spectrometer following the RFQ. MR-TOF is a relatively new technology used to purify beams with a mass-resolving power up to 3×10{sup 5} as was demonstrated in experiments at CERN/ISOLDE. Very high purity singly-charged radioactive ion beams will be injected into the EBIS for charge breeding and due to its inherent properties, the EBIS-CB will maintain the purity of the charge bred beams. Possible contamination of residual gas ions will be greatly suppressed by achieving ultra-high vacuum in the EBIS trap. This paper will present and discuss the design of the LEBT and the overall integration of the EBIS-CB into ATLAS.

  7. The compatibility of SiC/SiC composites with ceramic breeder materials

    Energy Technology Data Exchange (ETDEWEB)

    Sample, T. (Institute for Advanced Materials, Commission of the European Communities, Joint Research Centre, I-21020, Ispra (Vatican City State, Holy See) (Italy)); Fenici, P. (Institute for Advanced Materials, Commission of the European Communities, Joint Research Centre, I-21020, Ispra (Vatican City State, Holy See) (Italy)); Kolbe, H. (Institute for Advanced Materials, Commission of the European Communities, Joint Research Centre, I-21020, Ispra (Vatican City State, Holy See) (Italy)); Orecchia, L. (Institute for Advanced Materials, Commission of the European Communities, Joint Research Centre, I-21020, Ispra (Vatican City State, Holy See) (Italy))

    1994-09-01

    The compatibility of three lithium-containing ceramic breeder materials Li[sub 4]SiO[sub 4], Li[sub 2]ZrO[sub 3] and LiAlO[sub 2] with two industrially available SiC/SiC composites was determined. Simple capsule tests were carried out at 600 and 800 C in closed capsules, dynamic vacuum and flowing helium. All three breeder materials were reactive towards the SiO[sub 2] content of the SiC/SiC composites forming a surface layer of Li[sub 2]SiO[sub 3]. The as-received' Li[sub 4]SiO[sub 4] was found to be much more reactive than Li[sub 2]ZrO[sub 3] or LiAlO[sub 2]. However, the greater reactivity was found to be governed by the Li[sub 2]CO[sub 3] impurity content of the Li[sub 4]SiO[sub 4] granules. Removal of the Li[sub 2]CO[sub 3], through thermal decomposition under vacuum, reduced the extend of Li[sub 2]SiO[sub 3] formation. The reaction of the breeder materials to form Li[sub 2]SiO[sub 3] is briefly discussed in relation to the probable operating conditions for a SiC/SiC composite structural material in a blanket. ((orig.))

  8. Nuclear Reactors and Technology; (USA)

    Energy Technology Data Exchange (ETDEWEB)

    Cason, D.L.; Hicks, S.C. (eds.)

    1991-01-01

    Nuclear Reactors and Technology (NRT) announces on a monthly basis the current worldwide information available from the open literature on nuclear reactors and technology, including all aspects of power reactors, components and accessories, fuel elements, control systems, and materials. This publication contains the abstracts of DOE reports, journal articles, conference papers, patents, theses, and monographs added to the Energy Science and Technology Database (EDB) during the past month. Also included are US information obtained through acquisition programs or interagency agreements and international information obtained through the International Energy Agency's Energy Technology Data Exchange or government-to-government agreements. The digests in NRT and other citations to information on nuclear reactors back to 1948 are available for online searching and retrieval on EDB and Nuclear Science Abstracts (NSA) database. Current information, added daily to EDB, is available to DOE and its contractors through the DOE integrated Technical Information System. Customized profiles can be developed to provide current information to meet each user's needs.

  9. NUCLEAR REACTOR CONTROL SYSTEM

    Science.gov (United States)

    Epler, E.P.; Hanauer, S.H.; Oakes, L.C.

    1959-11-01

    A control system is described for a nuclear reactor using enriched uranium fuel of the type of the swimming pool and other heterogeneous nuclear reactors. Circuits are included for automatically removing and inserting the control rods during the course of normal operation. Appropriate safety circuits close down the nuclear reactor in the event of emergency.

  10. Sequential probability ratio tests for reactor signal validation and sensor surveillance applications

    Energy Technology Data Exchange (ETDEWEB)

    Humenik, K. (Maryland Univ., Baltimore, MD (USA)); Gross, K.C. (Argonne National Lab., IL (USA))

    1989-11-09

    This paper examines the properties of sequential probability ratio tests (SPRT's) and the application of these tests to nuclear power reactor operation. Recently SPRT's have been applied to delayed-neutron (DN) signal data analysis using actual reactor data from the Experimental Breeder Reactor-II, which is operated by Argonne National Laboratory. The implementation of this research as part of an expert system is described. Mathematical properties of the SPRT are investigated, and theoretical results are validated with tests that use DN-signal data taken from the EBR-II in Idaho. Variations of the basic SPRT and applications to general signal validation are also explored. 16 refs., 3 figs.

  11. Encouraging “K” strategy nitrifiers over “r” strategists in bioaugmentation reactor

    Directory of Open Access Journals (Sweden)

    Zięba Bartosz

    2017-01-01

    Full Text Available Bacteria responsible for ammonia oxidization (AOB can be differed into two groups which have different bio kinetic parameters. Those groups are slow growing bacteria with lower half saturation coefficient for NH4 (k -strategist and fast growing bacteria with higher half saturation coefficient for NH4 (r- strategist. By controlling operational conditions of process it is possible to create dominance of one of those colonies to enhance the nitrification rate. Therefore model of sequencing bath reactor was developed to study the correlation of bioaugmentation of the side stream breeder reactor and predominant AOB culture. The course of the study was to find the minimal bioaugmentation influent of AOB rich recycled sludge to create dominance of k-strategist in the side stream reactor with maintaining maximal possible increase of overall AOB load. In addition operating conditions like sludge retention time, NH4 concentration and loading regimes was investigated to determine the optimum for the process.

  12. Proposed Advanced Reactor Adaptation of the Standard Review Plan NUREG-0800 Chapter 4 (Reactor) for Sodium-Cooled Fast Reactors and Modular High-Temperature Gas-Cooled Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Belles, Randy [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Poore, III, Willis P. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Brown, Nicholas R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Flanagan, George F. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Holbrook, Mark [Idaho National Lab. (INL), Idaho Falls, ID (United States); Moe, Wayne [Idaho National Lab. (INL), Idaho Falls, ID (United States); Sofu, Tanju [Argonne National Lab. (ANL), Argonne, IL (United States)

    2017-03-01

    This report proposes adaptation of the previous regulatory gap analysis in Chapter 4 (Reactor) of NUREG 0800, Standard Review Plan (SRP) for the Review of Safety Analysis Reports for Nuclear Power Plants: LWR [Light Water Reactor] Edition. The proposed adaptation would result in a Chapter 4 review plan applicable to certain advanced reactors. This report addresses two technologies: the sodium-cooled fast reactor (SFR) and the modular high temperature gas-cooled reactor (mHTGR). SRP Chapter 4, which addresses reactor components, was selected for adaptation because of the possible significant differences in advanced non-light water reactor (non-LWR) technologies compared with the current LWR-based description in Chapter 4. SFR and mHTGR technologies were chosen for this gap analysis because of their diverse designs and the availability of significant historical design detail.

  13. Impact of 6 different intestinal bacteria on broiler breeder sperm motility in vitro.

    Science.gov (United States)

    Haines, M D; Parker, H M; McDaniel, C D; Kiess, A S

    2013-08-01

    Male fertility is often evaluated by measuring sperm parameters, including concentration, viability, and motility. This is important because after copulation occurs, sperm must overcome many barriers in the female reproductive tract to fertilize the ovum. In mammalian species, sperm have been shown to have reduced motility when bacteria are present. In male broiler breeders, bacteria have been associated with spermatozoa, but their effect on motility has not been investigated. The sperm quality index is a modern rapid method of evaluating avian sperm motility. Therefore, the objective of this study was to use the sperm quality index to determine if broiler breeder sperm motility is reduced when semen is exposed to various bacteria. In this experiment, semen was collected from 20 broiler breeders to obtain a pooled neat semen sample. Six different intestinal bacteria, Salmonella enterica, Escherichia coli, Campylobacter jejuni, Clostridium bifermentans, Lactobacillus acidophilus, and Bifidobacterium animalis were cultured overnight. For each bacterium, 50 µL of semen was diluted in 450 µL of saline, sterile broth, or the overnight culture, creating 3 treatments. The experiment was repeated twice. In each treatment, 3 replicates were evaluated at 0 and 10 min postinoculation, creating a completely randomized design with a split plot over time. Also, the pH was measured for each treatment at 0 and 10 min. The results indicated that all broths containing bacteria immediately reduced broiler breeder sperm motility when compared with the controls (P < 0.0001), but broths containing Bifidobacterium or Lactobacillus virtually made sperm immotile. Although broth containing Salmonella, Campylobacter, and Bifidobacterium immediately reduced sperm motility, the reduction did not change over time. Broths containing E. coli, Clostridium, and Lactobacillus reduced sperm motility immediately, but over time motility continued to decrease. However, pH was increased when semen was

  14. Nuclear reactor overflow line

    Science.gov (United States)

    Severson, Wayne J.

    1976-01-01

    The overflow line for the reactor vessel of a liquid-metal-cooled nuclear reactor includes means for establishing and maintaining a continuous bleed flow of coolant amounting to 5 to 10% of the total coolant flow through the overflow line to prevent thermal shock to the overflow line when the reactor is restarted following a trip. Preferably a tube is disposed concentrically just inside the overflow line extending from a point just inside the reactor vessel to an overflow tank and a suction line is provided opening into the body of liquid metal in the reactor vessel and into the annulus between the overflow line and the inner tube.

  15. Light water reactor safety

    CERN Document Server

    Pershagen, B

    2013-01-01

    This book describes the principles and practices of reactor safety as applied to the design, regulation and operation of light water reactors, combining a historical approach with an up-to-date account of the safety, technology and operating experience of both pressurized water reactors and boiling water reactors. The introductory chapters set out the basic facts upon which the safety of light water reactors depend. The central section is devoted to the methods and results of safety analysis. The accidents at Three Mile Island and Chernobyl are reviewed and their implications for light wate

  16. Nuclear reactor physics

    CERN Document Server

    Stacey, Weston M

    2010-01-01

    Nuclear reactor physics is the core discipline of nuclear engineering. Nuclear reactors now account for a significant portion of the electrical power generated worldwide, and new power reactors with improved fuel cycles are being developed. At the same time, the past few decades have seen an ever-increasing number of industrial, medical, military, and research applications for nuclear reactors. The second edition of this successful comprehensive textbook and reference on basic and advanced nuclear reactor physics has been completely updated, revised and enlarged to include the latest developme

  17. Introduction to reactor internal materials for pressurized water reactor

    Energy Technology Data Exchange (ETDEWEB)

    Ryu, Woo Suk; Hong, Joon Hwa; Jee, Se Hwan; Lee, Bong Sang; Kuk, Il Hyun [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1994-06-01

    This report reviewed the R and D states of reactor internal materials in order to be a reference for researches and engineers who are concerning on localization of the materials in the field or laboratory. General structure of PWR internals and material specification for YGN 3 and 4 were reviewed. States-of-arts on R and D of stainless steel and Alloy X-750 were reviewed, and degradation mechanisms of the components were analyzed. In order to develop the good domestic materials for reactor internal, following studies would be carried out: microstructure, sensitization behavior, fatigue property, irradiation-induced stress corrosion cracking/radiation-induced segregation, radiation embrittlement. (Author) 7 refs., 14 figs., 5 tabs.,.

  18. Savannah River Site production reactor technical specifications. K Production Reactor

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    These technical specifications are explicit restrictions on the operation of the Savannah River Site K Production Reactor. They are designed to preserve the validity of the plant safety analysis by ensuring that the plant is operated within the required conditions bounded by the analysis, and with the operable equipment that is assumed to mitigate the consequences of an accident. Technical specifications preserve the primary success path relied upon to detect and respond to accidents. This report describes requirements on thermal-hydraulic limits; limiting conditions for operation and surveillance for the reactor, power distribution control, instrumentation, process water system, emergency cooling and emergency shutdown systems, confinement systems, plant systems, electrical systems, components handling, and special test exceptions; design features; and administrative controls.

  19. Design guide for category II reactors light and heavy water cooled reactors. [US DOE

    Energy Technology Data Exchange (ETDEWEB)

    Brynda, W J; Lobner, P R; Powell, R W; Straker, E A

    1978-05-01

    The Department of Energy (DOE), in the ERDA Manual, requires that all DOE-owned reactors be sited, designed, constructed, modified, operated, maintained, and decommissioned in a manner that gives adequate consideration to health and safety factors. Specific guidance pertinent to the safety of DOE-owned reactors is found in Chapter 0540 of the ERDA Manual. The purpose of this Design Guide is to provide additional guidance to aid the DOE facility contractor in meeting the requirement that the siting, design, construction, modification operation, maintainance, and decommissioning of DOW-owned reactors be in accordance with generally uniform standards, guide and codes which are comparable to those applied to similar reactors licensed by the Nuclear Regulatory Commission (NRC). This Design Guide deals principally with the design and functional requirements of Category II reactor structure, components, and systems.

  20. Design guide for Category III reactors: pool type reactors. [US DOE

    Energy Technology Data Exchange (ETDEWEB)

    Brynda, W J; Lobner, P R; Powell, R W; Straker, E A

    1978-11-01

    The Department of Energy (DOE) in the ERDA Manual requires that all DOE-owned reactors be sited, designed, constructed, modified, operated, maintained, and decommissioned in a manner that gives adequate consideration to health and safety factors. Specific guidance pertinent to the safety of DOE-owned reactors is found in Chapter 0540 of the ERDA Manual. The purpose of this Design Guide is to provide additional guidance to aid the DOE facility contractor in meeting the requirement that the siting, design, construction, modification, operation, maintenance, and decommissioning of DOE-owned reactors be in accordance with generally uniform standards, guides, and codes which are comparable to those applied to similar reactors licensed by the Nuclear Regulatory Commission (NRC). This Design Guide deals principally with the design and functional requirement of Category III reactor structures, components, and systems.

  1. Spent nuclear fuel discharges from U.S. reactors 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    Spent Nuclear Fuel Discharges from US Reactors 1994 provides current statistical data on fuel assemblies irradiated at commercial nuclear reactors operating in the US. This year`s report provides data on the current inventories and storage capacities at these reactors. Detailed statistics on the data are presented in four chapters that highlight 1994 spent fuel discharges, storage capacities and inventories, canister and nonfuel component data, and assembly characteristics. Five appendices, a glossary, and bibliography are also included. 10 figs., 34 tabs.

  2. Spinning fluids reactor

    Science.gov (United States)

    Miller, Jan D; Hupka, Jan; Aranowski, Robert

    2012-11-20

    A spinning fluids reactor, includes a reactor body (24) having a circular cross-section and a fluid contactor screen (26) within the reactor body (24). The fluid contactor screen (26) having a plurality of apertures and a circular cross-section concentric with the reactor body (24) for a length thus forming an inner volume (28) bound by the fluid contactor screen (26) and an outer volume (30) bound by the reactor body (24) and the fluid contactor screen (26). A primary inlet (20) can be operatively connected to the reactor body (24) and can be configured to produce flow-through first spinning flow of a first fluid within the inner volume (28). A secondary inlet (22) can similarly be operatively connected to the reactor body (24) and can be configured to produce a second flow of a second fluid within the outer volume (30) which is optionally spinning.

  3. Prolongation of the BOR-60 reactor operation

    Directory of Open Access Journals (Sweden)

    Alexey l. Izhutov

    2015-04-01

    Full Text Available The fast neutron reactor BOR-60 is one of the key experimental facilities worldwide to perform large-scale tests of fuel, absorbing, and structural materials for advanced reactors. The BOR-60 reactor was put into operation in December 1969, and by the end of 2014 it had been operating on power for ∼265,000 hours. BOR-60 still demonstrates potential capabilities to extend the lifetime of sodium-cooled fast reactors. The BOR-60 lifetime should have expired at the end of 2014. Over the past few years, a great scope of work has been performed to justify the possibility of extending its lifetime. The work included inspection of the equipment conditions, calculations and experimental research on operating parameters and the conditions of nonremovable components, investigation of the structural material samples after their long-term operation under irradiation, etc. Based on the results of the work performed, the residual lifetime was evaluated and the reactor operator made a decision to extend the lifetime period of the BOR-60 reactor. After considering both a set of documents about the reactor conditions and the positive decision of independent experts, the Regulatory Authority of the Russian Federation extended the BOR-60 operating license up to 2020.

  4. Reactor Monitoring with Antineutrinos - A Progress Report

    Science.gov (United States)

    Bernstein, Adam

    2012-08-01

    The Reactor Safeguards regime is the name given to a set of protocols and technologies used to monitor the consumption and production of fissile materials in nuclear reactors. The Safeguards regime is administered by the International Atomic Energy Agency (IAEA), and is an essential component of the global Treaty on Nuclear Nonproliferation, recently renewed by its 189 remaining signators. (The 190th, North Korea, withdrew from the Treaty in 2003). Beginning in Russia in the 1980s, a number of researchers worldwide have experimentally demonstrated the potential of cubic meter scale antineutrino detectors for non-intrusive real-time monitoring of fissile inventories and power output of reactors. The detectors built so far have operated tens of meters from a reactor core, outside of the containment dome, largely unattended and with remote data acquisition for an entire 1.5 year reactor cycle, and have achieved levels of sensitivity to fissile content of potential interest for the IAEA safeguards regime. In this article, I will describe the unique advantages of antineutrino detectors for cooperative monitoring, consider the prospects and benefits of increasing the range of detectability for small reactors, and provide a partial survey of ongoing global research aimed at improving near-field and far field monitoring and discovery of nuclear reactors.

  5. Related activities on management of ageing of Dalat Research Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Pham Van Lam [Reactor Dept., Nuclear Research Institute, Dalat (Viet Nam)

    1998-10-01

    The Dalat Nuclear Research Reactor (DNRR) is a pool type research reactor which was reconstructed in 1982 from the previous 250 kW TRIGA-MARK II reactor. The reactor core, the control and instrumentation system, the primary and secondary cooling systems as well as other associated systems were newly designed and installed. The renovated reactor reached its initial criticality in November 1983 and attained its nominal power of 500 kW in February 1984. Since then DNRR has been operated safely. Retained structures of the former reactor such as the reactor aluminum tank, the graphite reflector, the thermal column, the horizontal beam tubes and the radiation concrete shielding are 35 years old. During the recent years, in-service inspection has been carried out, the reactor control and instrumentation system were renovated due to ageing and obsolescence of its components, reactor general inspection and refurbishment were performed. Efforts are being made to cope with ageing of old reactor components to maintain safe operation of the DNRR. (author)

  6. Calibration of a fuel-to-cladding gap conductance model for fast reactor fuel pins

    Energy Technology Data Exchange (ETDEWEB)

    Baker, R.B.

    1978-05-01

    The report presents refined methods for calculation of fuel temperatures in PuO/sub 2/-UO/sub 2/ fuel in Fast Breeder Reactor (FBR) fuel pins. Of primary concern is the calculation of the temperature changes across the fuel-to-cladding gap of pins with fuel burnups that range from 60 to 10,900 MWd/MTM (0.006 to 1.12 at.%). Described in particular are: (1) a proposed set of heat transfer formulations and corresponding material properties for modeling radial heat transfer through the fuel and cladding; and (2) the calibration of a fuel-to-cladding gap conductance model, as part of a thermal performance computer code (SIEX-M1) which incorporates the proposed heat transfer expressions, using integral thermal performance data from two unique in-reactor experiments. The test data used are from the HEDL P-19 and P-20 experiments which were irradiated in the Experimental Breeder Reactor Number Two (EBR-II), for the Hanford Engineering Development Laboratory (HEDL).

  7. Neutron fluxes in test reactors

    Energy Technology Data Exchange (ETDEWEB)

    Youinou, Gilles Jean-Michel [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2017-01-01

    Communicate the fact that high-power water-cooled test reactors such as the Advanced Test Reactor (ATR), the High Flux Isotope Reactor (HFIR) or the Jules Horowitz Reactor (JHR) cannot provide fast flux levels as high as sodium-cooled fast test reactors. The memo first presents some basics physics considerations about neutron fluxes in test reactors and then uses ATR, HFIR and JHR as an illustration of the performance of modern high-power water-cooled test reactors.

  8. The effect of arginine dietary supplementation in broiler breeder hens on offspring humoral and cell-mediated immune responses

    Directory of Open Access Journals (Sweden)

    AE Murakami

    2014-06-01

    Full Text Available The influence of supplementing the diet of broiler breeder hens with arginine (Arg on their offspring's humoral and cell-mediated immune response was evaluated in two experiments. In experiments I and II, breeder hens were fed diets containing graded levels of Arg (0.943, 1.093, 1.243, 1.393 and 1.543% digestible Arg. In experiment I, the offspring was randomly grouped according to the treatment received by the breeder hens, with five levels of Arg in the maternal diet and six replicates, giving a total 30 experimental units. In experiment II, the offspring were grouped in accordance with the treatment received by the breeder hens; however, Arg was added to the starter diet (1.300, 1.450, 1.600, 1.750 and 1.900% digestible Arg and also the growing diet (1.150, 1.300, 1.450, 1.600 and 1.750% digestible Arg. Supplementation of the broiler breeder hen diet did not influence (p > 0.05 the development of the lymphoid organs (cloacal bursa, thymus and spleen of the offspring, whether their diet were supplemented or not. Nevertheless, greater weight and dimensions cloacal bursa were found in the supplemented offspring in comparison with the nonsupplemented offspring. Macrophage phagocytic activity was found to be unaffected (p > 0.05, independently of the Arg supplementation. The offspring fed with supplemented diets showed a linear reduction in the antibody titer against Newcastle Disease (p 0.05 by the breeder hen diet. This study concluded that supplementing the breeder hen diet with arginine is insufficient to improve the humoral and cellular immune response, requiring supplementation of the offspring diet.

  9. Summary of the 4th workshop on the reduced-moderation water reactor

    Energy Technology Data Exchange (ETDEWEB)

    Nakatsuka, Toru; Ishikawa, Nobuyuki; Iwamura, Takamichi (eds.) [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2001-09-01

    The research on Reduced-Moderation Water Reactors (RMWRs) has been performed in JAERI for the development of future innovative reactors. The workshop on the RMWRs has been held every year since fiscal 1997 aimed at information exchange between JAERI and other organizations such as universities, laboratories, utilities and vendors. The 4th workshop was held on March 2, 2001 under the joint auspices of JAERI and North Kanto branch of Atomic Energy Society of Japan. The workshop began with three lectures on recent research activities in JAERI entitled 'Recent Situation of Research on Reduced-Moderation Water Reactor', 'Analysis on Electricity Generation Costs of Reduced Moderation Water Reactors' and 'Reprocessing Technology for Spent Mixed-Oxides Fuel from LWR'. Then five lectures followed: 'Micro Reactor Physics of MOX Fueled LWR' which shows the recent results of reactor physics, Fast Reactor Cooled by Supercritical Light Water' which is another type of reduced-moderation reactor, 'Phase 1 of Feasibility Studies on Commercialized Fast Breeder Reactor Cycle System' mainly conducted by Japan Nuclear Cycle Development Institute (JNC), 'Integral Type Small PWR with Stand-alone Safety' which is intended to suit for the future consumers' needs, and Utilization of Plutonium in Reduced-Moderation Water Reactors' which dictates benefits of plutonium utilization with RMWRs. This report includes the original papers presented at the workshop and summaries of the questions and answers for each lecture, as well as presentation handouts, program and participant list as appendixes. The 8 of the presented papers are indexed individually. (J.P.N.)

  10. Summary of the 3rd workshop on the reduced-moderation water reactor

    Energy Technology Data Exchange (ETDEWEB)

    Ishikawa, Nobuyuki; Nakatsuka, Tohru; Iwamura, Takamichi [eds.

    2000-06-01

    The research activities of a Reduced-Moderation Water Reactor (RMWR) are being performed for a development of the next generation water-cooled reactor. A workshop on the RMWR was held on March 3rd 2000 aiming to exchange information between JAERI and other organizations such as universities, laboratories, utilities and vendors. This report summarizes the contents of lectures and discussions on the workshop. The 1st workshop was held on March 1998 focusing on the review of the research activities and future research plan. The succeeding 2nd workshop was held on March 1999 focusing on the topics of the plutonium utilization in water-cooled reactors. The 3rd workshop was held on March 3rd 2000, which was attended by 77 participants. The workshop began with a lecture titled 'Recent Situation Related to Reduced-Moderation Water Reactor (RMWR)', followed by 'Program on MOX Fuel Utilization in Light Water Reactors' which is the mainstream scenario of plutonium utilization by utilities, and 'Feasibility Studies on Commercialized Fast Breeder Reactor Cycle System' mainly conducted by Japan Nuclear Cycle Development Institute (JNC). Also, following lectures were given as the recent research activities in JAERI: 'Progress in Design Study on Reduced-Moderation Water Reactors', 'Long-Term Scenarios of Power Reactors and Fuel Cycle Development and the Role of Reduced Moderation Water Reactors', 'Experimental and Analytical Study on Thermal Hydraulics' and Reactor Physics Experiment Plan using TCA'. At the end of the workshop, a general discussion was performed about the research and development of the RMWR. This report includes the original papers presented at the workshop and summaries of the questions and answers for each lecture and general discussion, as well as presentation viewgraphs, program and participant list as appendixes. The 7 of the presented papers are indexed individually. (J.P.N.)

  11. Evaluation of Teflon hose for Hanford Reactor services. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Rudock, E.R.

    1955-09-01

    Teflon hose was tested and evaluated for its usability as an integral piping component of a Hanford reactor process tube cooling system. A satisfactory process tube connector design, fabricated from Teflon hose, was developed for the replacement of the existing 100-K reactor aluminum connectors.

  12. Preliminary accident analysis of Loss of Off-Site Power and In-Box LOCA for the CFETR helium cooled solid breeder blanket

    Energy Technology Data Exchange (ETDEWEB)

    Lian, Qiang; Cui, Shijie [School of Nuclear Science and Technology, Xi’an Jiaotong University, Xi’an, 710049 (China); Shaanxi Key Lab. of Advanced Nuclear Energy and Technology, Xi’an Jiaotong University, Xi’an, 710049 (China); Tian, Wenxi, E-mail: wxtian@mail.xjtu.edu.cn [School of Nuclear Science and Technology, Xi’an Jiaotong University, Xi’an, 710049 (China); Shaanxi Key Lab. of Advanced Nuclear Energy and Technology, Xi’an Jiaotong University, Xi’an, 710049 (China); Zhang, Jing; Zhang, Dalin; Su, G.H. [School of Nuclear Science and Technology, Xi’an Jiaotong University, Xi’an, 710049 (China); Shaanxi Key Lab. of Advanced Nuclear Energy and Technology, Xi’an Jiaotong University, Xi’an, 710049 (China)

    2017-05-15

    Highlights: • The CFETR HCSB blanket has been investigated using RELAP5. • Loss of Off-Site Power is investigated. • The parametric analyses during In-Box LOCA are investigated. • The HCSB blanket for CFETR is designed with sufficient decay heat removal capability. - Abstract: As one of three candidate tritium breeding blanket concepts for Chinese Fusion Engineering Test Reactor (CFETR), a conceptual structure of helium cooled solid breeder (HCSB) blanket was recently proposed. In this paper, the preliminary thermal-hydraulic and safety analyses of the typical outboard equatorial blanket module (No.12) have been carried out using RELAP5/Mod3.4 code. Two design basis accidents are investigated based on the steady-state initialization, including Loss of Off-Site Power and In-Box Loss of Coolant Accident (LOCA). The differences between circulator coast down and circulator rotor locked under Loss of Off-Site Power are compared. Regarding the In-Box LOCA, the influences of different break sizes and locations are thoroughly analyzed based on a relatively accurate modeling method of the heat structures in sub-modules. The analysis results show that the blanket and the combined helium cooling system (HCS) are designed with sufficient decay heat removal capability for both accidents, which can preliminarily verify the feasibility of the conceptual design. The research work can also provide an important reference for parameter optimization of the blanket and its HCS in the next stage.

  13. Advanced Burner Reactor Preliminary NEPA Data Study.

    Energy Technology Data Exchange (ETDEWEB)

    Briggs, L. L.; Cahalan, J. E.; Deitrich, L. W.; Fanning, T. H.; Grandy, C.; Kellogg, R.; Kim, T. K.; Yang, W. S.; Nuclear Engineering Division

    2007-10-15

    The Global Nuclear Energy Partnership (GNEP) is a new nuclear fuel cycle paradigm with the goals of expanding the use of nuclear power both domestically and internationally, addressing nuclear waste management concerns, and promoting nonproliferation. A key aspect of this program is fast reactor transmutation, in which transuranics recovered from light water reactor spent fuel are to be recycled to create fast reactor transmutation fuels. The benefits of these fuels are to be demonstrated in an Advanced Burner Reactor (ABR), which will provide a representative environment for recycle fuel testing, safety testing, and modern fast reactor design and safeguard features. Because the GNEP programs will require facilities which may have an impact upon the environment within the meaning of the National Environmental Policy Act of 1969 (NEPA), preparation of a Programmatic Environmental Impact Statement (PEIS) for GNEP is being undertaken by Tetra Tech, Inc. The PEIS will include a section on the ABR. In support of the PEIS, the Nuclear Engineering Division of Argonne National Laboratory has been asked to provide a description of the ABR alternative, including graphics, plus estimates of construction and operations data for an ABR plant. The compilation of this information is presented in the remainder of this report. Currently, DOE has started the process of engaging industry on the design of an Advanced Burner Reactor. Therefore, there is no specific, current, vendor-produced ABR design that could be used for this PEIS datacall package. In addition, candidate sites for the ABR vary widely as to available water, geography, etc. Therefore, ANL has based its estimates for construction and operations data largely on generalization of available information from existing plants and from the environmental report assembled for the Clinch River Breeder Reactor Plant (CRBRP) design [CRBRP, 1977]. The CRBRP environmental report was chosen as a resource because it thoroughly

  14. Dietary influence of digestible lysine concentration on Cobb 500 hen broiler breeder reproductive performance.

    Science.gov (United States)

    Mejia, L; McDaniel, C D; Corzo, A

    2012-02-01

    A study was conducted to examine the reproductive parameters of Cobb 500 broiler breeder hens fed 2 different types of diets varying in digestible lysine concentration. In total, 240 Cobb 500 broiler breeder pullets were placed in individual cages and given experimental diets from 35 to 45 wk of age. Treatments 1 and 2 were diets formulated using only commercially available feed ingredients and consisted of digestible lysine intakes of 1,200 (IDL) and 1,010 mg/hen per day (ID). Treatments 3 and 4 consisted of semipurified diets with the inclusion of l-glutamic acid to maintain isonitrogenous conditions with digestible lysine intakes of 1,010 (SPL) and 600 mg/hen per day (SP). Hens fed the SPL and SP diets had lower hen-day egg production than hens fed the ID diet, with hens receiving the IDL diet yielding intermediate values. Hens fed the SP diet had the lowest (P < 0.05) egg weight, but no differences were observed among dietary treatments for egg specific gravity. Fertility and hatchability of eggs set were lowest (P < 0.05) for hens fed the SPL dietary treatment. No differences were observed for early and middle embryonic mortality, contaminated, or pipped eggs. Late embryonic mortality was observed to be higher (P < 0.05) in hens fed the SP diet. A decrease in the daily intake of digestible lysine appeared to improve broiler breeder reproductive performance when hens were fed a semipurified diet. In contrast, the same effect was not observed when hens were fed a standard industry-type diet that contained less lysine.

  15. Identification of novel candidate genes for follicle selection in the broiler breeder ovary

    Science.gov (United States)

    2012-01-01

    Background Broiler breeders fed ad libitum are characterised by multiple ovulation, which leads to poor shell quality and egg production. Multiple ovulation is controlled by food restriction in commercial flocks. However, the level of food restriction raises welfare concerns, including that of severe hunger. Reducing the rate of multiple ovulation by genetic selection would facilitate progress towards developing a growth profile for optimum animal welfare. Results The study utilised 3 models of ovarian follicle development; laying hens fed ad libitum (experiment 2) and broiler breeders fed ad libitum or a restricted diet (experiments 1 & 3). This allowed us to investigate gene candidates for follicular development by comparing normal, abnormal and “controlled” follicle hierarchies at different stages of development. Several candidate genes for multiple ovulation were identified by combining microarray analysis of restricted vs. ad libitum feeding, literature searches and QPCR expression profiling throughout follicle development. Three candidate genes were confirmed by QPCR as showing significant differential expression between restricted and ad libitum feeding: FSHR, GDF9 and PDGFRL. PDGFRL, a candidate for steroidogenesis, showed significantly up-regulated expression in 6–8 mm follicles of ad libitum fed broiler breeders (P = 0.016), the period at which follicle recruitment occurs. Conclusions Gene candidates have been identified and evidence provided to support a possible role in regulation of ovarian function and follicle number. Further characterisation of these genes will be required to assess their potential for inclusion into breeding programmes to improve the regulation of follicle selection and reduce the need for feed restriction. PMID:22992265

  16. Investigation of ion capture in an electron beam ion trap charge-breeder for rare isotopes

    Science.gov (United States)

    Kittimanapun, Kritsada

    Charge breeding of rare isotope ions has become an important ingredient for providing reaccelerated rare isotope beams for science. At the National Superconducting Cyclotron Laboratory (NSCL), a reaccelerator, ReA, has been built that employs an advanced Electron Beam Ion Trap (EBIT) as a charge breeder. ReA will provide rare-isotope beams with energies of a few hundred keV/u up to tens of MeV/u to enable the study of properties of rare isotopes via low energy Coulomb excitation and transfer reactions, and to investigate nuclear reactions important for nuclear astrophysics. ReA consists of an EBIT charge breeder, a charge-over-mass selector, a room temperature radio-frequency quadrupole accelerator, and a superconducting radio-frequency linear accelerator. The EBIT charge breeder features a high-current electron gun, a long trap structure, and a hybrid superconducting magnet to reach both high acceptance for injected low-charge ions as well as high-electron beam current densities for fast charge breeding. In this work, continuous ion injection and capture in the EBIT have been investigated with a dedicated Monte-Carlo simulation code and in experimental studies. The Monte-Carlo code NEBIT considers the electron-impact ionization cross sections, space charge due to the electron beam current, ion dynamics, electric field from electrodes, and magnetic field from the superconducting magnet. Experiments were performed to study the capture efficiency as a function of injected ion beam current, electron beam current, trap size, and trap potential depth. The charge state evolution of trapped ions was studied, providing information about the effective current density of the electron beam inside the EBIT. An attempt was made to measure the effective space-charge potential of the electron beam by studying the dynamics of a beam injected and reflected inside the trap.

  17. Methods of fertility control in cats: Owner, breeder and veterinarian behavior and attitudes.

    Science.gov (United States)

    Murray, Jane K; Mosteller, Jill R; Loberg, Jenny M; Andersson, Maria; Benka, Valerie A W

    2015-09-01

    Fertility control is important for population management of owned and unowned cats, provides health benefits at the individual level and can reduce unwanted sexually dimorphic behaviors such as roaming, aggression, spraying and calling. This article reviews the available evidence regarding European and American veterinarian, owner and pedigree cat breeder attitudes toward both surgical sterilization and non-surgical fertility control. It additionally presents new data on veterinarians' and pedigree cat breeders' use of, and attitudes toward, alternative modalities of fertility control. Within the United States and Europe, the proportion of cats reported to be sterilized varies widely. Published estimates range from 27-93% for owned cats and 2-5% for cats trapped as part of a trap-neuter-return (TNR) program. In some regions and populations of cats, non-surgical fertility control is also used. Social context, cultural norms, individual preferences, economic considerations, legislation and professional organizations may all influence fertility control decisions for cats. Particularly in Europe, a limited number of non-surgical temporary contraceptives are available for cats; these include products with regulatory approval for cats as well as some used 'off label'. Non-surgical methods remove the risk of complications related to surgery and offer potential to treat more animals in less time and at lower cost; they may also appeal to pedigree cat breeders seeking temporary contraception. However, concerns over efficacy, delivery methods, target species safety, duration and side effects exist with current non-surgical options. Research is under way to develop new methods to control fertility in cats without surgery. US and European veterinarians place high value on three perceived benefits of surgical sterilization: permanence, behavioral benefits and health benefits. Non-surgical options will likely need to share these benefits to be widely accepted by the veterinary

  18. The reprocessing of advanced mixed lithium orthosilicate/metatitanate tritium breeder pebbles

    Energy Technology Data Exchange (ETDEWEB)

    Leys, Oliver, E-mail: oliver.leys@kit.edu [Karlsruhe Institute of Technology, Institute for Applied Materials, Eggenstein-Leopoldshafen, 76344 (Germany); Bergfeldt, Thomas; Kolb, Matthias H.H.; Knitter, Regina [Karlsruhe Institute of Technology, Institute for Applied Materials, Eggenstein-Leopoldshafen, 76344 (Germany); Goraieb, Aniceto A. [Karlsruhe Beryllium Handling Facility, Eggenstein-Leopoldshafen, 76344 (Germany)

    2016-06-15

    Highlights: • The recycling of advanced breeder pebbles without a deterioration of the material properties is possible using a melt-based process. • The only accumulation of impurities upon reprocessing, results from the platinum crucible alloy used for processing. • It is possible to replenish burnt-up lithium by additions of LiOH·H{sub 2}O to the melt during reprocessing. - Abstract: The recycling of tritium breeding materials will be necessary for any future use of nuclear fusion energy due to economical as well as ecological considerations. In the case of the solid breeder blanket concept, the ceramic pebble beds that are intended for the generation of tritium will eventually need to be restored due to depleted lithium levels as well as due to fractured pebbles, which will cause a deterioration of the pebble bed properties. It is proposed that the pebbles, which are fabricated using a melt-based process, are recycled using the same initial process, by replenishing the lithium levels and reforming the pebbles at the same time. To prove this recycling scheme, advanced ceramic pebbles were fabricated and then re-melted multiple times to prove that the reprocessing did not have any negative effect on the pebble properties and secondly, pebbles were produced with a simulated lithium burn-up and subsequently replenished by additions of LiOH to the melt. It was shown that the re-melting and lithium re-enrichment had no effect on the pebble properties, demonstrating that a melt-based process is suitable for recycling used breeder pebbles.

  19. High performance charge breeder for HIE-ISOLDE and TSR@ISOLDE applications

    Energy Technology Data Exchange (ETDEWEB)

    Shornikov, Andrey, E-mail: andrey.shornikov@cern.ch; Mertzig, Robert C.; Wenander, Fredrik J. C. [CERN, Geneva 23, CH-1211 (Switzerland); Beebe, Edward N.; Pikin, Alexander [Brookhaven National Lab, Upton, NY 11973 (United States)

    2015-01-09

    We report on the development of the HEC{sup 2} (High Energy Compression and Current) charge breeder, a possible high performance successor to REXEBIS at ISOLDE. The new breeder would match the performance of the HIE-ISOLDE linac upgrade and make full use of the possible installation of a storage ring at ISOLDE (the TSR@ISOLDE initiative [1]). Dictated by ion beam acceptance and capacity requirements, the breeder features a 2–3.5 A electron beam. In many cases very high charge states, including bare ions up to Z=70 and Li/Na-like up to Z=92 could be requested for experiments in the storage ring, therefore, electron beam energies up to 150 keV are required. The electron-beam current density needed for producing ions with such high charge states at an injection rate into TSR of 0.5–1 Hz is between 10 and 20 kA/cm{sup 2}, which agrees with the current density needed to produce A/q<4.5 ions for the HIE-ISOLDE linac with a maximum repetition rate of 100 Hz. The first operation of a prototype electron gun with a pulsed electron beam of 1.5 A and 30 keV was demonstrated in a joint experiment with BNL [2]. In addition, we report on further development aiming to achieve CW operation of an electron beam having a geometrical transverse ion-acceptance matching the injection of 1{sup +} ions (11.5 μm), and an emittance/energy spread of the extracted ion beam matching the downstream mass separator and RFQ (0.08 μm normalized / ± 1%)

  20. HORIZONTAL BOILING REACTOR SYSTEM

    Science.gov (United States)

    Treshow, M.

    1958-11-18

    Reactors of the boiling water type are described wherein water serves both as the moderator and coolant. The reactor system consists essentially of a horizontal pressure vessel divided into two compartments by a weir, a thermal neutronic reactor core having vertical coolant passages and designed to use water as a moderator-coolant posltioned in one compartment, means for removing live steam from the other compartment and means for conveying feed-water and water from the steam compartment to the reactor compartment. The system further includes auxiliary apparatus to utilize the steam for driving a turbine and returning the condensate to the feed-water inlet of the reactor. The entire system is designed so that the reactor is self-regulating and has self-limiting power and self-limiting pressure features.

  1. Fast Spectrum Reactors

    CERN Document Server

    Todd, Donald; Tsvetkov, Pavel

    2012-01-01

    Fast Spectrum Reactors presents a detailed overview of world-wide technology contributing to the development of fast spectrum reactors. With a unique focus on the capabilities of fast spectrum reactors to address nuclear waste transmutation issues, in addition to the well-known capabilities of breeding new fuel, this volume describes how fast spectrum reactors contribute to the wide application of nuclear power systems to serve the global nuclear renaissance while minimizing nuclear proliferation concerns. Readers will find an introduction to the sustainable development of nuclear energy and the role of fast reactors, in addition to an economic analysis of nuclear reactors. A section devoted to neutronics offers the current trends in nuclear design, such as performance parameters and the optimization of advanced power systems. The latest findings on fuel management, partitioning and transmutation include the physics, efficiency and strategies of transmutation, homogeneous and heterogeneous recycling, in addit...

  2. Effects of dietary L-arginine on laying performance and antioxidant capacity of broiler breeder hens, eggs, and offspring during the late laying period.

    Science.gov (United States)

    Duan, Xiaoxue; Li, Feng; Mou, Shaoyang; Feng, Jiawei; Liu, Peifeng; Xu, Liangmei

    2015-12-01

    The effects of maternal L-arginine supplementation on laying performance and the antioxidant capacity of broiler breeder hens, egg yolk, and their one-day-old offspring were investigated. In a 9 wk experiment, 210 60-week-old Arbor Acres healthy female broiler breeders were randomly divided into 5 treatments with 6 replicates of 7 females and fed a corn and soybean meal diet with 5 arginine levels (0.96%, 1.16%, 1.36%, 1.56%, and 1.76% digestible arginine). Laying performance and anti-oxidant capacity of broiler breeder hens, eggs, and offspring were evaluated. Digestible arginine level in the broiler breeder diet had a significant effect on the laying rate (linear and quadratic effect, Pbroiler breeder diet on the total antioxidant capacity (T-AOC) levels and methane dicarboxylic aldehyde (MDA) concentration in the broiler breeder serum, egg yolk and serum, and liver and breast of one-day-old offspring (linear and quadratic effect, Pbroiler breeder serum was observed. There were significant effects of digestible arginine level in the broiler breeder diet on the GSH-PX activity of the egg yolk (linear effect, Pbroiler breeder during the late laying period.

  3. Effect of dietary vitamin A on reproductive performance and immune response of broiler breeders.

    Directory of Open Access Journals (Sweden)

    Jianmin Yuan

    Full Text Available The effects of dietary vitamin A supplementation on reproductive performance, liver function, fat-soluble vitamin retention, and immune response were studied in laying broiler breeders. In the first phase of the experiment, 1,120 Ross-308 broiler breeder hens were fed a diet of corn and soybean meal supplemented with 5,000 to 35,000 IU/kg vitamin A (retinyl acetate for 20 weeks. In the second phase, 384 Ross-308 broiler breeder hens were fed the same diet supplemented with 5,000 to 135,000 IU/kg vitamin A (retinyl acetate for 24 weeks. The hens' reproductive performance, the concentrations of vitamins A and E in liver and egg yolk, liver function, mRNA expression of vitamin D receptor in duodenal mucosa, antibody titers against Newcastle disease virus vaccine, and T-cell proliferation responses were evaluated. Supplementation of vitamin A at levels up to and including 35,000 IU/kg did not affect reproductive performance and quadratically affected antibody titer to Newcastle disease virus vaccine (p<0.05. Dietary addition of vitamin A linearly increased vitamin A concentration in liver and yolk and linearly decreased α-, γ-, and total tocopherol concentration in yolk (p<0.01 and α-tocopherol in liver (p<0.05. Supplementation of vitamin A at doses of 45,000 IU/kg and above significantly decreased egg weight, yolk color, eggshell thickness and strength, and reproductive performance. Dietary vitamin A significantly increased mRNA expression of vitamin D receptor in duodenal mucosa (p<0.05, increased aspartate amino transferase activity, and decreased total bilirubin concentration in serum. Supplementation of vitamin A at 135,000 IU/kg decreased the proliferation of peripheral blood lymphocytes (p<0.05. Therefore, the maximum tolerable dose of vitamin A for broiler breeders appears to be 35,000 IU/kg, as excessive supplementation has been shown to impair liver function, reproductive performance, and immune response.

  4. SEROLOGICAL EVIDENCE OF ANTIBODIES AGAINST LARYNGOTRACHEITIS VIRUS IN BROILERS AND LAYER BREEDERS

    OpenAIRE

    Yauris S., Gabriela; Laboratorio de Patología Aviar,Facultad de Medicina Veterinaria, Universidad Nacional Mayor de San Marcos, Lima; Icochea D’A., Eliana; Laboratorio de Patología Aviar,Facultad de Medicina Veterinaria, Universidad Nacional Mayor de San Marcos, Lima; González V., Rosa; Laboratorio de Patología Aviar,Facultad de Medicina Veterinaria, Universidad Nacional Mayor de San Marcos, Lima; Falcón P., Néstor; Laboratorio de Medicina Veterinaria Preventiva,Facultad de Veterinaria y Zootecnia, Universidad Peruana Cayetano Heredia, Lima

    2012-01-01

    A total of 360 serum samples from eighteen flocks of broiler and layer breeders in phase of production were used in order to detect the presence of Laryngotracheitis virus (VLT) antibodies using a commercial ELISA test. The poultry farms were located in the region of Lima and in the northern coast of Peru. Samples were collected from July 2004 till September 2005 and were processed as a group. Eight samples out of 360 in 6 flocks were positive to antibodies against VLT. Due to the small numbe...

  5. Effects of Mothers’ Attitude as Breeders and Distance of Stockyard toward Diarrhea Incidence among Toddlers

    OpenAIRE

    Yarmaliza - Yarmaliza; Sugito Sugito; Teuku Reza Ferasyi; Nurliana Nurliana; Razali Razali

    2016-01-01

    Diarrhea is a disease with change of feces form and concentration in which feces is mushy to liquid, and the increase of poop frequency more than usual (three times or more in a day). In Aceh Province, there were diarrhea cases as many as 48/1,000 live births. In West Aceh District, there were 1,071 cases in 2014, meanwhile there were 70 cases among toddlers in Meureubo Subdistrict. This study aimed to determine relation between mothers’attitude as breeders and distance of stockyard toward...

  6. THERMAL NEUTRONIC REACTOR

    Science.gov (United States)

    Spinrad, B.I.

    1960-01-12

    A novel thermal reactor was designed in which a first reflector formed from a high atomic weight, nonmoderating material is disposed immediately adjacent to the reactor core. A second reflector composed of a moderating material is disposed outwardly of the first reflector. The advantage of this novel reflector arrangement is that the first reflector provides a high slow neutron flux in the second reflector, where irradiation experiments may be conducted with a small effect on reactor reactivity.

  7. Neutronic performance of two european breeder-inside tube (BIT) blankets for DEMO: Helium-cooled ceramic LiAlO{sub 2} with Be multiplier and water-cooled liquid Li17Pb 2103. international symposium on fusion nuclear technologies (ISFNT-3)

    Energy Technology Data Exchange (ETDEWEB)

    Petrizzi, L.; Rado, V. [Associazione EURATOM-ENEA sulla Fusione, Frascati (Italy)

    1994-11-01

    In support of ENEA (Italian Agency for New Technologies, Energy and the Environment) activity in the European Community Test Programme, a neutronic analysis has been performed on the two latest blanket design relative to helium-cooled ceramic BIT (breeder-inside-tube) (with LiAIO{sub 2} and Be multiplier) and the water-cooled liquid Li17Pb in cylindrical modules. At this scope the powerful MCNP Monte Carlo code has been used (version 4). A detailed and accurate description of the geometrical model has been performed inserting the main reactor details and avoiding breeder material dilution inside the modules. TBR performance is low for the solid breeder BIT (with 10 ports 1.011) due mainly to low blanket coverage near the exhaust duct and this solution should be revised. CM Li17Pb blanket reaches sufficient TBR (1.059, with ports) to rely on tritium self-sufficiency. Shielding properties, with respect to the toroidal field coils, have been estimated in a simplified model by means of the ANISN code, supplied with nuclear data library coherent with the one used by MCNP. The analysis suggests a careful shield thickness/composition design to be confident on the shielding capability of the whole blanket and shield system.

  8. Gas tagging and cover gas combination for nuclear reactor

    Science.gov (United States)

    Gross, Kenny C.; Laug, Matthew T.

    1985-01-01

    The invention discloses the use of stable isotopes of neon and argon, that are grouped in preselected different ratios one to the other and are then sealed as tags in different cladded nuclear fuel elements to be used in a liquid metal fast breeder reactor. Failure of the cladding of any fuel element allows fission gases generated in the reaction and these tag isotopes to escape and to combine with the cover gas held in the reactor over the fuel elements. The isotopes specifically are Ne.sup.20, Ne.sup.21 and Ne.sup.22 of neon and Ar.sup.36, Ar.sup.38 and Ar.sup.40 of argon, and the cover gas is helium. Serially connected cryogenically operated charcoal beds are used to clean the cover gas and to separate out the tags. The first or cover gas cleanup bed is held between approximately 0.degree. and -25.degree. C. operable to remove the fission gases from the cover gas and tags and the second or tag recovery system bed is held between approximately -170.degree. and -185.degree. C. operable to isolate the tags from the cover gas. Spectrometric analysis further is used to identify the specific tags that are recovered, and thus the specific leaking fuel element. By cataloging the fuel element tags to the location of the fuel elements in the reactor, the location of the leaking fuel element can then be specifically determined.

  9. Correlation and path analysis for yield and yield components in common bean genotypes (Phaseolus vulgaris L.)

    OpenAIRE

    Önder Mustafa; Kahraman Ali; Ceyhan Ercan

    2013-01-01

    Determination of breeding criteria is quite important for plant breeders. The present study was carried out to determine yield and its components which are affecting seed yield and to study the relationships between yield components and other characteristics. A total of 42 common bean genotypes that are widely grown in Turkey were used as material. Direct and indirect effects of the yield components on seed yield were analyzed using path coefficient analysis. Seed yield (kg ha-1) was most aff...

  10. Effects of Zinc Glycinate on Productive and Reproductive Performance, Zinc Concentration and Antioxidant Status in Broiler Breeders.

    Science.gov (United States)

    Zhang, Ling; Wang, Yong-Xia; Xiao, Xue; Wang, Jiang-Shui; Wang, Qian; Li, Kai-Xuan; Guo, Tian-Yu; Zhan, Xiu-An

    2017-08-01

    An experiment was conducted to investigate the effects of zinc glycinate (Zn-Gly) supplementation as an alternative for zinc sulphate (ZnSO4) on productive and reproductive performance, zinc (Zn) concentration and antioxidant status in broiler breeders. Six hundred 39-week-old Lingnan Yellow broiler breeders were randomly assigned to 6 groups consisting of 4 replicates with 25 birds each. Breeders were fed a basal diet (control group, 24 mg Zn/kg diet), basal diet supplemented with 80 mg Zn/kg diet from ZnSO4 or basal diet supplemented with 20, 40, 60 and 80 mg Zn/kg diet from Zn-Gly. The experiment lasted for 8 weeks after a 4-week pre-test with the basal diet, respectively. Results showed that Zn supplementation, regardless of sources, improved (P broiler breeders, and the 80 mg Zn/kg from Zn-Gly was the optimum choice for broiler breeders compared with other levels of Zn from Zn-Gly and 80 mg/kg Zn from ZnSO4.

  11. Vitamin E and selenium in broiler breeder diets: Effect on live performance, hatching process, and chick quality.

    Science.gov (United States)

    Urso, U R A; Dahlke, F; Maiorka, A; Bueno, I J M; Schneider, A F; Surek, D; Rocha, C

    2015-05-01

    This study evaluated the effect of different dietary vitamin E levels and different selenium sources on the productive and reproductive performance of broiler breeders. In total 640 females and 64 males between 22 and 52 weeks old were studied. A completely randomized experimental design in factorial arrangement, with 4 treatments of 8 replicates with 20 females and 2 males each, was applied. Treatments consisted of 2 vitamin E levels (30 and 120 mg/kg) and two selenium sources (sodium selenite and zinc-L-selenomethionine). Egg production (rate of lay and eggs per breeder), egg characteristics (egg, yolk, eggshell, and albumen weights), fertility, incubation responses (egg weight loss during incubation, hatchability, and hatching window), and hatchling characteristics (weight and yield) were evaluated. There was no influence of dietary vitamin E levels or selenium sources on egg production (P > 0.05). Mature breeders (47 weeks old) fed zinc-L-selenomethionine and 120 mg vitamin E/kg feed produced heavier eggs and albumen. Hatchability of the eggs of breeders fed 120 mg vitamin E/kg feed was higher than breeders fed 30 mg vitamin at 29 wks. The dietary inclusion of organic selenium also promoted heavier hatchling weight until egg production peak (33 wk), but did not influence hatchling quality or hatching window. It was concluded that the dietary supplementation of zinc-L-selenomethione and vitamin E (120 mg/kg feed) could be used to improve egg characteristics and incubation response. © 2015 Poultry Science Association Inc.

  12. Hematological values and body, heart and liver weights of male and female broiler embryos of young and old breeder eggs

    Directory of Open Access Journals (Sweden)

    VS Morita

    2009-03-01

    Full Text Available This study analyzed broiler breeder age (29 or 60 wk-old effects on physical characteristics of eggs (initial mass, mass loss, volume, diameter, surface area and density and of eggshells(weight, volume, thickness, conductance, and porosity , as well as the influence of embryo sex on hematological parameters and body, liver and heart weights during incubation (at days 13, 15, 18 and 21. Physical parameter values were lower in 29-wk-old broiler breeder eggs than those of 60-wk-old breeders, except for relative eggshell weight, which was higher. In both male and female embryos, erythrocytic parameters and the body, liver, and heart weights increased during the incubation. The embryos and their organs were heavier when derived from 60-wk-old breeder eggs as compared to 29-wk-old breeder eggs. At hatching, hematocrit values were higher in males than in females. Thrombocytes were the most frequent leukocytes in the blood. Thrombocyte percentage decreased and lymphocyte percentage increased during the last days of incubation. The results showed maternal age influence only on body, heart and liver weights, focal sex-related influence the hematocrit at hatching, and temporal effect of incubation on body and organ weights, as well as on red blood cell count, hematocrit, hemoglobin, plasma glucose, and lymphocytes, which increased during the incubation period, while mean corpuscular volume and thrombocyte values decreased.

  13. Remote Reactor Monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Bernstein, Adam [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Dazeley, Steve [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Dobie, Doug [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Marleau, Peter [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Brennan, Jim [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gerling, Mark [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Sumner, Matthew [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Sweany, Melinda [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-10-21

    The overall goal of the WATCHMAN project is to experimentally demonstrate the potential of water Cerenkov antineutrino detectors as a tool for remote monitoring of nuclear reactors. In particular, the project seeks to field a large prototype gadolinium-doped, water-based antineutrino detector to demonstrate sensitivity to a power reactor at ~10 kilometer standoff using a kiloton scale detector. The technology under development, when fully realized at large scale, could provide remote near-real-time information about reactor existence and operational status for small operating nuclear reactors out to distances of many hundreds of kilometers.

  14. Oscillatory flow chemical reactors

    National Research Council Canada - National Science Library

    Slavnić Danijela S; Bugarski Branko M; Nikačević Nikola M

    2014-01-01

    .... However, the reactions of interests for the mentioned industry sectors are often slow, thus continuous tubular reactors would be impractically long for flow regimes which provide sufficient heat...

  15. Membrane reactors at Degussa.

    Science.gov (United States)

    Wöltinger, Jens; Karau, Andreas; Leuchtenberger, Wolfgang; Drauz, Karlheinz

    2005-01-01

    The review covers the development of membrane reactor technologies at Degussa for the synthesis of fine chemicals. The operation of fed-batch or continuous biocatalytic processes in the enzyme membrane reactor (EMR) is well established at Degussa. Degussa has experience of running EMRs from laboratory gram scale up to a production scale of several hundreds of tons per year. The transfer of the enzyme membrane reactor from biocatalysis to chemical catalysis in the chemzyme membrane reactor (CMR) is discussed. Various homogeneous catalysts have been investigated in the CMR, and the scope and limitation of this new technique is discussed.

  16. Pressurizing new reactors

    Energy Technology Data Exchange (ETDEWEB)

    Neill, J.S.

    1956-01-30

    The Technical Division was asked recently to consider designs for new reactors that would add 8000 MW capacity to the Savannah River Plant. One modification of the existing SRP design that would enable a higher power rating, and therefore require fewer new reactors, is an increase in the maximum pressure in the D{sub 2}O system. The existing reactors at SRP are designed for a maximum pressure in the gas plenum of only 5 psig. Higher pressures enable higher D{sub 2} temperatures and higher sheath temperatures without local boiling or burnout. The requirements in reactor cooling facilities at any given power level would therefore be reduced by pressurizing.

  17. HOMOGENEOUS NUCLEAR POWER REACTOR

    Science.gov (United States)

    King, L.D.P.

    1959-09-01

    A homogeneous nuclear power reactor utilizing forced circulation of the liquid fuel is described. The reactor does not require fuel handling outside of the reactor vessel during any normal operation including complete shutdown to room temperature, the reactor being selfregulating under extreme operating conditions and controlled by the thermal expansion of the liquid fuel. The liquid fuel utilized is a uranium, phosphoric acid, and water solution which requires no gus exhaust system or independent gas recombining system, thereby eliminating the handling of radioiytic gas.

  18. Cyclic purging for low-temperature solid fusion reactor blanket operation

    Energy Technology Data Exchange (ETDEWEB)

    Was, G.S.; Lidsky, L.M.

    1979-05-01

    A purging process was developed that will permit operation of fusion reactor blankets employing solid LiAlO/sub 2/ as the breeder material at fuel temperatures of <600/sup 0/C. The low fuel temperature would greatly reduce the problems of fuel sintering, densification, and volume expansion that occur at fuel temperatures in excess of 900/sup 0/C without degrading the plant thermal efficiency. The process consists of heating the blanket to a specified temperature for a given time at regular intervals to release tritium held up in the breeding material. As an example, a detailed purging cycle was developed for the breeder rod shim rod blanket that uses LiAlO/sub 2/ in the form of micronsize particles compacted into millimeter-size pellets and is designed for low-temperature operation. Tritium inventory, doubling time, purging time, purging temperature, purging frequency, and particle size are the parameters used to evaluate the process. Calculations indicate that breeder particle sizes ranging from 20 to 50 ..mu..m and purging temperatures ranging from 600 to 700/sup 0/C can result in purge times of <1 h with three or more weeks between purges, and a doubling time of 7 yr for a blanket inventory limit of 5 kg and a breeding ratio of <1.02.

  19. Testing of an environmental compatible dismantling technology for activated metallic reactor components (water abrasive jetstream technic) under real conditions. Final report; Erprobung des Wasserabrasivsuspensionsstrahlverfahrens (WASS) bei der Zerlegung aktivierter metallischer Reaktorkomponenten (RDB u.a.) unter realen Bedingungen. Endbericht

    Energy Technology Data Exchange (ETDEWEB)

    Kalwa, H.; Louis, H.; Brandt, C. [Hannover Univ. (Germany). Inst. fuer Werkstoffkunde

    2000-07-01

    The water abrasive suspension jetstream cutting (WASJ) was tested during the past research program for its general practicability. The programs goal was to investigate the dismantling of the lower part of the core baffel as well as of the reactor-pressure-vessel itself. For this purpose the University of Hanover established a lab-scale testing program to optimize the following parameters: different abrasives, cutting performance, remote tools monitoring and handling, verification of the forces to the manipulators, adaptation of cutting parameters to the different cutting tasks and the analyses for water-processing to maintain sub-aquatic visibility. Based on the results obtained in minor-scale testing the process parameters were adapted to the pilot manifold (ALBA-WASS) in VAK. This program served also for the training of personnel and the certification of the procedure by experts and the authorities. During the pre-operational phase a solids extraction and water-purification device was developed to enable the use of the technique under sub-aquatic conditions. The core-baffel was dismantled with the 1400 bar WASS into parts ready for final storage. For the cutting of the reactor-pressure-vessel itself, the WASS was modified to a jetstream-pressure of 2000 bar. At the end of the operation we were able to determine that for the dismantling of nuclear-power-plants an additional efficient cutting technique is now available. (orig.) [German] Das Wasserabrasivsuspensionsstrahlschneiden war in vorangegangenen Forschungsvorhaben auf seine generelle Einsatzbarkeit untersucht worden. Die Aufgabenziele waren, die Zerlegung des Kernmantelunterteiles sowie die Zerlegung des Reaktordruckbehaelters. Zu diesem Zweck wurden mit der Laboranlage der Universitaet Hannover Untersuchungen verschiedener Abrasivmittel bezueglich Schneidfaehigkeit und Truebung, Versuche zur Optimierung der Werkzeugueberwachung und -handhabung, Ermittlung der Kraefte am Handhabungssystem, Anpassung der

  20. NGNP Reactor Coolant Chemistry Control Study

    Energy Technology Data Exchange (ETDEWEB)

    Brian Castle

    2010-11-01

    The main focus of this paper is to identify the most desirable ranges of impurity levels in the primary coolant to optimize component life in the primary circuit of the Next Generation Nuclear Plant (NGNP), which will either be a prismatic block or pebble bed reactor.

  1. Prospects for Tokamak Fusion Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Sheffield, J.; Galambos, J.

    1995-04-01

    This paper first reviews briefly the status and plans for research in magnetic fusion energy and discusses the prospects for the tokamak magnetic configuration to be the basis for a fusion power plant. Good progress has been made in achieving fusion reactor-level, deuterium-tritium (D-T) plasmas with the production of significant fusion power in the Joint European Torus (up to 2 MW) and the Tokamak Fusion Test Reactor (up to 10 MW) tokamaks. Advances on the technologies of heating, fueling, diagnostics, and materials supported these achievements. The successes have led to the initiation of the design phases of two tokamaks, the International Thermonuclear Experimental Reactor (ITER) and the US Toroidal Physics Experiment (TPX). ITER will demonstrate the controlled ignition and extended bum of D-T plasmas with steady state as an ultimate goal. ITER will further demonstrate technologies essential to a power plant in an integrated system and perform integrated testing of the high heat flux and nuclear components required to use fusion energy for practical purposes. TPX will complement ITER by testing advanced modes of steady-state plasma operation that, coupled with the developments in ITER, will lead to an optimized demonstration power plant.

  2. Reactors for nuclear electric propulsion

    Energy Technology Data Exchange (ETDEWEB)

    Buden, D.; Angelo, J.A. Jr.

    1981-01-01

    Propulsion is the key to space exploitation and power is the key to propulsion. This paper examines the role of nuclear fission reactors as the primary power source for high specific impulse electric propulsion systems for space missions of the 1980s and 1990s. Particular mission applications include transfer to and a reusable orbital transfer vehicle from low-Earth orbit to geosynchronous orbit, outer planet exploration and reconnaissance missions, and as a versatile space tug supporting lunar resource development. Nuclear electric propulsion is examined as an indispensable component in space activities of the next two decades.

  3. Reactor Simulator Testing

    Science.gov (United States)

    Schoenfeld, Michael P.; Webster, Kenny L.; Pearson, Boise J.

    2013-01-01

    As part of the Nuclear Systems Office Fission Surface Power Technology Demonstration Unit (TDU) project, a reactor simulator test loop (RxSim) was design & built to perform integrated testing of the TDU components. In particular, the objectives of RxSim testing was to verify the operation of the core simulator, the instrumentation and control system, and the ground support gas and vacuum test equipment. In addition, it was decided to include a thermal test of a cold trap purification design and a pump performance test at pump voltages up to 150 V since the targeted mass flow rate of 1.75 kg/s was not obtained in the RxSim at the originally constrained voltage of 120 V. This paper summarizes RxSim testing. The gas and vacuum ground support test equipment performed effectively in NaK fill, loop pressurization, and NaK drain operations. The instrumentation and control system effectively controlled loop temperature and flow rates or pump voltage to targeted settings. The cold trap design was able to obtain the targeted cold temperature of 480 K. An outlet temperature of 636 K was obtained which was lower than the predicted 750 K but 156 K higher than the cold temperature indicating the design provided some heat regeneration. The annular linear induction pump (ALIP) tested was able to produce a maximum flow rate of 1.53 kg/s at 800 K when operated at 150 V and 53 Hz.

  4. Fail-safe reactivity compensation method for a nuclear reactor

    Energy Technology Data Exchange (ETDEWEB)

    Nygaard, Erik T.; Angelo, Peter L.; Aase, Scott B.

    2018-01-23

    The present invention relates generally to the field of compensation methods for nuclear reactors and, in particular to a method for fail-safe reactivity compensation in solution-type nuclear reactors. In one embodiment, the fail-safe reactivity compensation method of the present invention augments other control methods for a nuclear reactor. In still another embodiment, the fail-safe reactivity compensation method of the present invention permits one to control a nuclear reaction in a nuclear reactor through a method that does not rely on moving components into or out of a reactor core, nor does the method of the present invention rely on the constant repositioning of control rods within a nuclear reactor in order to maintain a critical state.

  5. Impact of transportation duration on stress responses in day-old chicks from young and old breeders.

    Science.gov (United States)

    Jacobs, Leonie; Delezie, Evelyne; Duchateau, Luc; Goethals, Klara; Ampe, Bart; Buyse, Johan; Tuyttens, Frank Andre Maurice

    2017-06-01

    The aim of this study was to assess the interaction effect of transportation duration and parental age on physiological stress responses and quality in day-old chicks. After hatch, 3240 chicks from either 29-week old (young) or 60-week old (old) broiler breeders were transported for 1.5h (short) or 11h (long). Thereafter, 228 chicks were assessed for quality and blood plasma was assayed for corticosterone (CORT), lactate, glucose, and thiobarbituric acid-reactive substances (TBARS, increased concentrations can indicate oxidative stress). No interaction effects of parental age and transportation duration were found (all P>0.10). Chicks from young breeders showed higher CORT levels (P=0.007) and were of higher quality (Tona method, Ptransportation, chicks showed increased CORT (Ptransportation. No evidence was provided that long transportation differently affected the quality or stress responses of chicks from breeder flocks of two ages. Copyright © 2017. Published by Elsevier Ltd.

  6. The evolving landscape of plant breeders rights regarding wheat varieties in South Africa

    Directory of Open Access Journals (Sweden)

    Charity R. Nhemachena

    2016-03-01

    Full Text Available Addressing the multiple challenges facing global agriculture requires integrated innovation in areas such as seeds, biotechnology, crop protection, grain storage and transport. Innovations related to plant improvement and the development of new or improved plant varieties will only happen at an optimal level if plant breeders rights (PBR are properly protected. The objective was to analyse the evolving landscape of wheat plant breeders rights to address the dearth of empirical evidence of the patterns and trends of wheat varietal improvements in South Africa. We compiled a detailed and novel count and attribute database of wheat varietal innovations in South Africa from 1979 to 2013 using various sources. This data set was then analysed to ascertain the main trends in, and ownership of PBRs for wheat varietal improvements in South Africa over this period. A total of 134 PBR wheat varietal innovations were lodged from 1979 to 2013, an average of 6 applications per year. The administrative delays in granting PBR applications were substantially reduced by 77 days during the post-deregulation period (after 1996, indicating increased efficiency. The main PBR applicants were Sensako (39%, the Agricultural Research Council Small Grains Institute (ARC-SGI (25% and Pannar (15%. The ARC-SGI contributed to some of the PBRs owned by private companies through shared genetic resources before Plant Variety Protection (PVP was implemented. Future innovations and dissemination of wheat innovations can be stimulated by plant variety protection, together with broader variety sector legislation that encourages both public and private sector investment.

  7. Longitudinal study of transmission of Escherichia coli from broiler breeders to broilers.

    Science.gov (United States)

    Poulsen, Louise Ladefoged; Thøfner, Ida; Bisgaard, Magne; Christensen, Jens Peter; Olsen, Rikke Heidemann; Christensen, Henrik

    2017-08-01

    Escherichia coli is of major importance in industrial broiler production as the main cause of salpingitis and peritonitis in broiler breeders. Furthermore E. coli is the most common cause of first week mortality in broiler chickens. The aim of the present study was to investigate the transmission of E. coli, isolated from broiler breeders with salpingitis, to the progeny and the possibility of subsequent first week mortality. Four parent flocks were followed during the whole production period (20-60 weeks) by post mortem and bacteriological examination of randomly selected dead birds. Newly hatched chickens from each flock were swabbed in the cloaca on four occasions (parent age 30, 40, 50, 60 weeks) and E. coli was isolated. Causes of first week mortality were determined pathologically and bacteriologically. E. coli isolates from parents, newly hatched chickens and first week mortality were selected for Pulsed-Field-Gel-Electrophoresis (PFGE) and Multi-Locus-Sequence-Typing (MLST) to determine their clonal relationships. E. coli was the main cause of both salpingitis in parents and first week mortality in broilers, and E. coli dominated the bacterial flora of the cloaca of newly hatched chickens. PFGE of E. coli showed identical band patterns in isolates from the three different sources indicating a transmission of E. coli from parent birds to chickens. In conclusion, E. coli isolated from salpingitis in broiler parents were found to be transmitted to broilers in which some sequence types contributed to the first week mortality. Copyright © 2017 Elsevier B.V. All rights reserved.

  8. Influence of gas pressure on the effective thermal conductivity of ceramic breeder pebble beds

    Energy Technology Data Exchange (ETDEWEB)

    Dai, Weijing [School of Civil Engineering, The University of Sydney, Sydney (Australia); Pupeschi, Simone [Institute for Applied Materials, Karlsruhe Institute of Technology (KIT) (Germany); Hanaor, Dorian [School of Civil Engineering, The University of Sydney, Sydney (Australia); Institute for Materials Science and Technologies, Technical University of Berlin (Germany); Gan, Yixiang, E-mail: yixiang.gan@sydney.edu.au [School of Civil Engineering, The University of Sydney, Sydney (Australia)

    2017-05-15

    Highlights: • This study explicitly demonstrates the influence of the gas pressure on the effective thermal conductivity of pebble beds. • The gas pressure influence is shown to correlated to the pebble size. • The effective thermal conductivity is linked to thermal-mechanical properties of pebbles and packing structure. - Abstract: Lithium ceramics have been considered as tritium breeder materials in many proposed designs of fusion breeding blankets. Heat generated in breeder pebble beds due to nuclear breeding reaction must be removed by means of actively cooled plates while generated tritiums is recovered by purge gas slowly flowing through beds. Therefore, the effective thermal conductivity of pebble beds that is one of the governing parameters determining heat transport phenomenon needs to be addressed with respect to mechanical status of beds and purge gas pressure. In this study, a numerical framework combining finite element simulation and a semi-empirical correlation of gas gap conduction is proposed to predict the effective thermal conductivity. The purge gas pressure is found to vary the effective thermal conductivity, in particular with the presence of various sized gaps in pebble beds. Random packing of pebble beds is taken into account by an approximated correlation considering the packing factor and coordination number of pebble beds. The model prediction is compared with experimental observation from different sources showing a quantitative agreement with the measurement.

  9. Distribution and Genetic Profiles of Campylobacter in Commercial Broiler Production from Breeder to Slaughter in Thailand

    Science.gov (United States)

    Prachantasena, Sakaoporn; Charununtakorn, Petcharatt; Muangnoicharoen, Suthida; Hankla, Luck; Techawal, Natthaporn; Chaveerach, Prapansak; Tuitemwong, Pravate; Chokesajjawatee, Nipa; Williams, Nicola; Humphrey, Tom; Luangtongkum, Taradon

    2016-01-01

    Poultry and poultry products are commonly considered as the major vehicle of Campylobacter infection in humans worldwide. To reduce the number of human cases, the epidemiology of Campylobacter in poultry must be better understood. Therefore, the objective of the present study was to determine the distribution and genetic relatedness of Campylobacter in the Thai chicken production industry. During June to October 2012, entire broiler production processes (i.e., breeder flock, hatchery, broiler farm and slaughterhouse) of five broiler production chains were investigated chronologically. Representative isolates of C. jejuni from each production stage were characterized by flaA SVR sequencing and multilocus sequence typing (MLST). Amongst 311 selected isolates, 29 flaA SVR alleles and 17 sequence types (STs) were identified. The common clonal complexes (CCs) found in this study were CC-45, CC-353, CC-354 and CC-574. C. jejuni isolated from breeders were distantly related to those isolated from broilers and chicken carcasses, while C. jejuni isolates from the slaughterhouse environment and meat products were similar to those isolated from broiler flocks. Genotypic identification of C. jejuni in slaughterhouses indicated that broilers were the main source of Campylobacter contamination of chicken meat during processing. To effectively reduce Campylobacter in poultry meat products, control and prevention strategies should be aimed at both farm and slaughterhouse levels. PMID:26886590

  10. Effects of broiler breeder management on pullet body weight and carcass uniformity.

    Science.gov (United States)

    Zuidhof, M J; Holm, D E; Renema, R A; Jalal, M A; Robinson, F E

    2015-06-01

    An experiment was conducted to study the effect of broiler breeder feeding management practices on pullet performance, BW uniformity, and carcass traits during rearing (to 22 wk of age). At 3 wk of age, 1,200 Ross 308 breeder pullets were assigned to one of 5 treatments: 1) control: standard mash diet, fed daily; 2) high fiber: mash diet containing 25% lower nutrient density, fed daily; 3) scatter: standard diet in pellet form scattered on litter, fed daily; 4) skip-a-day: standard mash diet, fed on alternate days; or 5) grading: standard mash diet, fed daily (birds sorted into low, average, and high BW groups every 4 wk). Birds on the high fiber treatment consumed more feed (Puniformity at 22 wk of age (CV=6.2%), while control and high fiber treatment groups were least uniform (CV>15%; Puniformity relative to the control during the most intense period of feed restriction (7 to 19 wk). Scatter feeding increased flock uniformity to a small degree, whereas grading yielded the highest increase in BW and carcass trait uniformity. © 2015 Poultry Science Association Inc.

  11. Pathological Responses of White Leghorn Breeder Hens Kept on Ochratoxin A Contaminated Feed

    Directory of Open Access Journals (Sweden)

    Zahoor-ul-Hassan, M. Zargham Khan*, Ahrar Khan and Ijaz Javed1

    2010-04-01

    Full Text Available Mycotoxins are among the most important environmental contaminants. In the present study, ochratoxin A (OTA was produced by propagation of Aspergillus ochraceus and fed to breeder hens. For this purpose, 84 breeder hens were divided into seven groups (A-G. Group A served as control, while groups B, C, D, E, F and G were fed OTA at 0.1, 0.5, 1.0, 3.0, 5.0 and 10.0 mg/Kg feed, respectively for 3 weeks. Clinical signs, feed intake, feed conversion ratio and egg mass production were recorded on daily basis, while body weight was recorded on weekly basis. Lesions on visceral organs and serum biochemical parameters were determined. Significant decrease in feed intake, body weight and egg mass production was found in the OTA treated groups compared to control (P<0.05. Among different groups, diarrhea, unthriftiness, water intake and depression increased with increase in dietary OTA levels. Enlargement and hemorrhages on liver and kidney were more severe in birds fed higher dietary OTA levels. Serum ALT, urea, creatinine and total protein levels were significantly higher in OTA treated groups. It was concluded that production performance, pathological alterations and serum biochemical changes determined became more severe with increase in dietary levels of OTA.

  12. Observations on Arthritis in Broiler Breeder Chickens Experimentally Infected with Staphylococcus aureus

    Directory of Open Access Journals (Sweden)

    Chang-Qin Gu§, Xue-Ying Hu§, Chang-Qing Xie1, Wan-Po Zhang, De-Hai Wang, Quan Zhou and Guo-Fu Cheng1*

    2013-04-01

    Full Text Available Staphylococcus aureus is the most common cause of bacterial arthritis in broiler breeder chickens. In this study, we established a model of broiler breeder chicken arthritis inoculated with Staph. aureus isolated from a spontaneously occurring bacterial arthritis in chickens. We evaluated the model by bacteriology, serology, pathology, and immunology. The results showed that 2.5 × 109 cfu Staph. aureus injected into the right joint cavity can successfully induce a chicken arthritis model. The majority of the infected chickens suffered lameness and joint swelling at 3 days post-inoculation (DPI. The death peak time was on 7 DPI and the mortality rate was 51.1%. Staph. aureus can be continuously isolated from the blood and left joint synovial fluid of the infected chickens. Lesions found on the infected chickens consisted of swollen joints full of caseous exudates, cartilage injury, and synovial membrane thickening with infiltration of inflammatory cells. The center of the lesion contained many round bacterial cocci. With joint injury aggravation, intra-articular hyaluronic acid gradually decreased, and serum interleukin-6 became significantly higher compared with the control (P<0.01 from 3 DPI. The results indicated that the chicken models of Staph. aureus-mediated arthritis were successful, and can be used to gain a better understanding of the host-bacterium relationship.

  13. Fission-fusion dynamics over large distances in raven non-breeders.

    Science.gov (United States)

    Loretto, Matthias-Claudio; Schuster, Richard; Itty, Christian; Marchand, Pascal; Genero, Fulvio; Bugnyar, Thomas

    2017-03-23

    The influence of fission-fusion dynamics, i.e., temporal variation in group size and composition, on social complexity has been studied in large-brained mammals that rely on social bonds. Little is known about birds, even though some species like ravens have recently received attention for their socio-cognitive skills and use of social bonds. While raven breeders defend territories year-round, non-breeders roam through large areas and form groups at food sources or night roosts. We here examined the fission-fusion patterns of non-breeding ravens over years, investigating whether birds meet repeatedly either at the same or at different locations. We combined four large datasets: presence-absence observations from two study sites (Austria, Italy) and GPS-tracking of ravens across two study areas (Austria, France). As expected, we found a highly dynamic system in which individuals with long phases of temporary settlement had a high probability of meeting others. Although GPS-tagged ravens spread out over thousands of square kilometres, we found repeated associations between almost half of the possible combinations at different locations. Such a system makes repeated interactions between individuals at different sites possible and likely. High fission-fusion dynamics may thus not hinder but shape the social complexity of ravens and, possibly, other long-term bonded birds.

  14. Molting of broiler breeders conditions for economic justification in continued production

    Directory of Open Access Journals (Sweden)

    Pešic Bratislav

    2016-01-01

    Full Text Available The method of artificial interruption of the production process by hens, broiler breeders, today known as the molting, it is often used in recent years as one of possible reasonable steps in making decisions on feasibility of continuing exploitation of broiler breeder's after the regular production process. The aim of this study was to test the economic profitability molting hens-broile, during one exploitation period. It included the throat of hybrid heavy line COBB500. The animals in the house were exposed to the same microclimate conditions, with identical positions in relation to light, ventilation, water, food and fertilization system. The analysis of food consumption per produced egg can be notice that parents ' hens during the process of molting consume more food by 43% compared to the hens fed the normal cycle of production. Achieved income was 2.54% higher after billing code for molting chickens instead of the regular production cycle. Economic indicators egg production after molting demonstrate justification of these biological and technological operations, considering that the net income per hen housed is the same income in the normal production process.

  15. Enterococcal-related vertebral osteoarthritis in South African broiler breeders: A case report

    Directory of Open Access Journals (Sweden)

    Henry Aitchison

    2014-02-01

    Full Text Available Infections in broilers and broiler breeders by Enterococcus cecorum, causing clinical disease, have increasingly been described in various countries in the Northern Hemisphere over the past decade. This case report describes an outbreak of enterococcal-associated vertebral osteoarthritis (EVOA in male broiler breeders in several flocks in South Africa. Male birds aged 4 and 9 weeks displayed the common presentation of lameness, paresis or complete paralysis. Autopsies of culled birds revealed masses on caudal thoracic vertebrae T5–T7, with vertebral osteomyelitis and spondylitis. Microbiological assays identified E. cecorum cultured from spondylitic lesions. Affected flocks were treated with amoxycillin at 25 mg/kg in the drinking water for 5 days, resulting in decreased numbers of lame birds and culls. The origin and pathogenesis of EVOA are poorly understood, which limits prevention to environmental factors that may inhibit systemic access by the enteric bacteria. Skeletal growth trends of male birds are thought to increase their susceptibility to bacterial colonisation at sites of skeletal strain, resulting in abscesses and lesions. Evidence points to the emergence of E. cecorum strains with increased pathogenicity; this highlights the need for greater understanding of the origins, treatment and prevention of EVOA to minimise its economic impact on poultry operations.

  16. Distribution and Genetic Profiles of Campylobacter in Commercial Broiler Production from Breeder to Slaughter in Thailand.

    Directory of Open Access Journals (Sweden)

    Sakaoporn Prachantasena

    Full Text Available Poultry and poultry products are commonly considered as the major vehicle of Campylobacter infection in humans worldwide. To reduce the number of human cases, the epidemiology of Campylobacter in poultry must be better understood. Therefore, the objective of the present study was to determine the distribution and genetic relatedness of Campylobacter in the Thai chicken production industry. During June to October 2012, entire broiler production processes (i.e., breeder flock, hatchery, broiler farm and slaughterhouse of five broiler production chains were investigated chronologically. Representative isolates of C. jejuni from each production stage were characterized by flaA SVR sequencing and multilocus sequence typing (MLST. Amongst 311 selected isolates, 29 flaA SVR alleles and 17 sequence types (STs were identified. The common clonal complexes (CCs found in this study were CC-45, CC-353, CC-354 and CC-574. C. jejuni isolated from breeders were distantly related to those isolated from broilers and chicken carcasses, while C. jejuni isolates from the slaughterhouse environment and meat products were similar to those isolated from broiler flocks. Genotypic identification of C. jejuni in slaughterhouses indicated that broilers were the main source of Campylobacter contamination of chicken meat during processing. To effectively reduce Campylobacter in poultry meat products, control and prevention strategies should be aimed at both farm and slaughterhouse levels.

  17. Severe inbreeding and small effective number of breeders in a formerly abundant marine fish.

    Directory of Open Access Journals (Sweden)

    Shannon J O'Leary

    Full Text Available In contrast to freshwater fish it is presumed that marine fish are unlikely to spawn with close relatives due to the dilution effect of large breeding populations and their propensity for movement and reproductive mixing. Inbreeding is therefore not typically a focal concern of marine fish management. We measured the effective number of breeders in 6 New York estuaries for winter flounder (Pseudopleuronectes americanus, a formerly abundant fish, using 11 microsatellite markers (6-56 alleles per locus. The effective number of breeders for 1-2 years was remarkably small, with point estimates ranging from 65-289 individuals. Excess homozygosity was detected at 10 loci in all bays (FIS = 0.169-0.283 and individuals exhibited high average internal relatedness (IR; mean = 0.226. These both indicate that inbreeding is very common in all bays, after testing for and ruling out alternative explanations such as technical and sampling artifacts. This study demonstrates that even historically common marine fish can be prone to inbreeding, a factor that should be considered in fisheries management and conservation plans.

  18. Severe Inbreeding and Small Effective Number of Breeders in a Formerly Abundant Marine Fish

    Science.gov (United States)

    O'Leary, Shannon J.; Hice, Lyndie A.; Feldheim, Kevin A.; Frisk, Michael G.; McElroy, Anne E.; Fast, Mark D.; Chapman, Demian D.

    2013-01-01

    In contrast to freshwater fish it is presumed that marine fish are unlikely to spawn with close relatives due to the dilution effect of large breeding populations and their propensity for movement and reproductive mixing. Inbreeding is therefore not typically a focal concern of marine fish management. We measured the effective number of breeders in 6 New York estuaries for winter flounder (Pseudopleuronectes americanus), a formerly abundant fish, using 11 microsatellite markers (6–56 alleles per locus). The effective number of breeders for 1–2 years was remarkably small, with point estimates ranging from 65–289 individuals. Excess homozygosity was detected at 10 loci in all bays (FIS = 0.169–0.283) and individuals exhibited high average internal relatedness (IR; mean = 0.226). These both indicate that inbreeding is very common in all bays, after testing for and ruling out alternative explanations such as technical and sampling artifacts. This study demonstrates that even historically common marine fish can be prone to inbreeding, a factor that should be considered in fisheries management and conservation plans. PMID:23762473

  19. The effects of a reduced balanced protein diet on litter moisture, pododermatitis and feather condition of female broiler breeders over three generations.

    Science.gov (United States)

    Li, C; Lesuisse, J; Schallier, S; Clímaco, W; Wang, Y; Bautil, A; Everaert, N; Buyse, J

    2017-11-02

    Protein content reduction in broiler breeder diets has been increasingly investigated. However, broiler breeders reared on low protein diets are characterized by a deterioration of the feather condition. Furthermore, polydipsia induced by controlled feed intake increases litter moisture and as a consequence pododermatitis. This project aimed to study the litter moisture, pododermatitis and feather condition of breeders fed with a 25% reduced balanced protein (RP) diet during the rearing and laying period over three successive generations. The experiment started with two treatments for the F0 generation: control (C) group fed with standard C diets and RP group fed with RP diets. The female F0-progeny of each treatment was divided into the two dietary treatments as well, resulting in four treatments for the F1 generation: C/C, C/RP, RP/C and RP/RP (breeder feed in F0/F1 generation). The RP diet fed breeders received on average 10% more feed than C diet fed breeders to achieve the same target BW. The female F1-progeny of each treatment were all fed with C diets which resulted in four treatments for the F2 generation: C/C/C, C/RP/C, RP/C/C and RP/RP/C (breeder feed in F0/F1/F2 generation). Litter moisture, footpad and hock dermatitis were recorded at regular intervals throughout the experimental period in all three generations. For the F0 and F1 generation, the pens of breeders receiving C diets had significantly higher litter moisture than the RP diets fed groups (P<0.05), resulting in an elevated footpad dermatitis occurrence (FDO) (P<0.05). No difference was found in the F2 generation. The feather condition was scored during the laying period for each generation. F0 and F1 breeders reared on the RP diets had poorer feather condition than those receiving the C diets (P<0.05). The C/RP breeders had a significantly poorer feather condition than RP/RP breeders (P<0.05). For the F2 generation, RP/RP/C breeders had a significantly better feather condition compared with

  20. Study on in-vessel thermohydraulics phenomena of sodium-cooled fast reactors. 1. Numerical investigation for the rationalization of hydrodynamics in the upper plenum

    Energy Technology Data Exchange (ETDEWEB)

    Muramatsu, Toshiharu; Yamaguchi, Akira [Japan Nuclear Cycle Development Inst., Oarai, Ibaraki (Japan). Oarai Engineering Center; Murakami, Satoshi [Customer System Co.Ltd. (Japan)

    2002-02-01

    A large-scale sodium-cooled fast breeder reactor in feasibility studies on commercialized fast reactors has a tendency of consideration of thorough simplified and compacted system designs to realize drastic economical improvements. Therefore, special attention should be paid to thermohydraulic designs for a gas entrainment behavior from free surfaces, a flow-induced vibration of in-vessel components, a thermal shock for various structures due to high-speed coolant flows, nonsymmetrical coolant flows, etc. in the reactor vessel. In-vessel thermohydraulic analyses were carried out using a multi-dimensional code AQUA to understand the thermohydraulic characteristics in the upper plenum, and to investigate suitable in-vessel structure for the elimination of gas entrainment possibility. From the analysis, the following results were obtained. (1) It is difficult to rationale in-vessel flow patterns through adjustments of porous ratio and pressure loss for a hold down plate and baffle plates installed in an upper core structure. (2) Dummy plug insertion to a slit of the upper core structure is one of effective measures to stabilize in-vessel flow patterns. (3) Flow guide devices such as a baffle ring and a partial inner barrel are also effective measures to eliminate impinging jet to a dipped plate (D/P) and to reduce horizontal flow velocity components at free surface. (4) Installations of labyrinth structures to a R/V - D/P gap is successful for decreasing of free surface horizontal flows. (5) Gap closing of an in-vessel fuel pot and two cold trap components has the effects of reductions for free surface horizontal flows and for the difference of free surface levels. Following future investigations are important preventive measures against the gas entrainment from the free surface. (1) Flattening of spatial axial velocity distributions at the R/V - D/P gap. (2) Alleviation measures of vortex concentration at free surface. (3) Separation measures of 3-dimensional vortex