WorldWideScience

Sample records for breakdown spectroscopy machine

  1. [Application of laser induced breakdown spectroscopy (LIBS) to microdetection of Au film machining].

    Science.gov (United States)

    Yuan, Dong-qing; Zhou, Ming; Shen, Jian; Ren, Nai-fei; Cai, Lan

    2008-10-01

    Film micro-machining is a core in micro- and nano- technology, micro-electro-mechanical systems and photoelectron field. However, it is difficult to control the quality of machining in processing film. In the present paper the authors propose a method to solve this problem by using laser induced breakdown spectroscopy (LIBS). The authors investigated the relation between excitation condition and the quantity of plasma in the process of micro-machining by pulse laser. At low frequency (machining become true.

  2. Impact of Machine Breakdowns on Productivity

    Directory of Open Access Journals (Sweden)

    Anwaruddin Tanwari

    2011-10-01

    Full Text Available This paper reports the machine breakdowns and their impact on the total productivity for the FMCGs (Fast Moving Consumer Goods industry because higher productivity rate is important factor on which the customer services largely depend in this competitive business world. This paper also suggests that the machine breakdowns and other related problems within the plant are due to improper care, keeping the plant operative for twenty four hours a day, seven days a week without any break and lack of management\\'s concentration towards these issues. These break-downs results in un-timely closure of the plant and very poor production performance is achieved in the plant that affects the service level at great level. Realising the importance of maintenance in improving productivity and service, an attempt has been made in this paper to study the scope of maintenance with the help of a case study.

  3. A study of machine learning regression methods for major elemental analysis of rocks using laser-induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Boucher, Thomas F., E-mail: boucher@cs.umass.edu [School of Computer Science, University of Massachusetts Amherst, 140 Governor' s Drive, Amherst, MA 01003, United States. (United States); Ozanne, Marie V. [Department of Astronomy, Mount Holyoke College, South Hadley, MA 01075 (United States); Carmosino, Marco L. [School of Computer Science, University of Massachusetts Amherst, 140 Governor' s Drive, Amherst, MA 01003, United States. (United States); Dyar, M. Darby [Department of Astronomy, Mount Holyoke College, South Hadley, MA 01075 (United States); Mahadevan, Sridhar [School of Computer Science, University of Massachusetts Amherst, 140 Governor' s Drive, Amherst, MA 01003, United States. (United States); Breves, Elly A.; Lepore, Kate H. [Department of Astronomy, Mount Holyoke College, South Hadley, MA 01075 (United States); Clegg, Samuel M. [Los Alamos National Laboratory, P.O. Box 1663, MS J565, Los Alamos, NM 87545 (United States)

    2015-05-01

    dimensionality of the data (6144 channels) relative to the small number of samples studied. The best-performing models were SVR-Lin for SiO{sub 2}, MgO, Fe{sub 2}O{sub 3}, and Na{sub 2}O, lasso for Al{sub 2}O{sub 3}, elastic net for MnO, and PLS-1 for CaO, TiO{sub 2}, and K{sub 2}O. Although these differences in model performance between methods were identified, most of the models produce comparable results when p ≤ 0.05 and all techniques except kNN produced statistically-indistinguishable results. It is likely that a combination of models could be used together to yield a lower total error of prediction, depending on the requirements of the user. - Highlights: • We compared 9 machine learning regression models for predicting mineral composition from LIBS. • These models vary over factors: linear/nonlinear, sparse/dense, univariate/multivariate. • The linear models evaluated generalized well for out-of-sample predictions. • The nonlinear models evaluated tended to overfit the training data and generalize poorly. • Sparse models best predicted the elements with a small number of high transition probability emission lines.

  4. Optimal Rules for Single Machine Scheduling with Stochastic Breakdowns

    Directory of Open Access Journals (Sweden)

    Jinwei Gu

    2014-01-01

    Full Text Available This paper studies the problem of scheduling a set of jobs on a single machine subject to stochastic breakdowns, where jobs have to be restarted if preemptions occur because of breakdowns. The breakdown process of the machine is independent of the jobs processed on the machine. The processing times required to complete the jobs are constants if no breakdown occurs. The machine uptimes are independently and identically distributed (i.i.d. and are subject to a uniform distribution. It is proved that the Longest Processing Time first (LPT rule minimizes the expected makespan. For the large-scale problem, it is also showed that the Shortest Processing Time first (SPT rule is optimal to minimize the expected total completion times of all jobs.

  5. Single machine stochastic JIT scheduling problem subject to machine breakdowns

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    In this paper we research the single machine stochastic JIT scheduling problem subject to the machine breakdowns for preemptive-resume and preemptive-repeat.The objective function of the problem is the sum of squared deviations of the job-expected completion times from the due date.For preemptive-resume,we show that the optimal sequence of the SSDE problem is V-shaped with respect to expected processing times.And a dynamic programming algorithm with the pseudopolynomial time complexity is given.We discuss the difference between the SSDE problem and the ESSD problem and show that the optimal solution of the SSDE problem is a good approximate optimal solution of the ESSD problem,and the optimal solution of the SSDE problem is an optimal solution of the ESSD problem under some conditions.For preemptive-repeat,the stochastic JIT scheduling problem has not been solved since the variances of the completion times cannot be computed.We replace the ESSD problem by the SSDE problem.We show that the optimal sequence of the SSDE problem is V-shaped with respect to the expected occupying times.And a dynamic programming algorithm with the pseudopolynomial time complexity is given.A new thought is advanced for the research of the preemptive-repeat stochastic JIT scheduling problem.

  6. Single machine stochastic JIT scheduling problem subject to machine breakdowns

    Institute of Scientific and Technical Information of China (English)

    TANG HengYong; ZHAO ChuanLi; CHENG CongDian

    2008-01-01

    In this paper we research the single machine stochastic JIT scheduling problem subject to the machine breakdowns for preemptive-resume and preemptive-repeat. The objective function of the problem is the sum of squared deviations of the job-expected completion times from the due date. For preemptive-resume, we show that the optimal sequence of the SSDE problem is V-shaped with respect to expected processing times. And a dynamic programming algorithm with the pseudopolynomial time complexity is, given. We discuss the difference between the SSDE problem and the ESSD problem and show that the optimal solution of the SSDE problem is a good approximate optimal solution of the ESSD problem, and the optimal solution of the SSDE problem is an optimal solution of the ESSD problem under some conditions. For preemptive-repeat, the stochastic JIT scheduling problem has not been solved since the variances of the completion times cannot be computed. We replace the ESSD problem by the SSDE problem. We show that the optimal sequence of the SSDE problem is V-shaped with respect to the expected occupying times. And a dynamic programming algorithm with the pseudopolynomial time complexity is given. A new thought is advanced for the research of the preemptive-repeat stochastic JIT scheduling problem.

  7. Laser induced breakdown spectroscopy on meteorites

    Energy Technology Data Exchange (ETDEWEB)

    De Giacomo, A. [Department of Chemistry, University of Bari (Italy); MIP-CNR sec Bari (Italy)], E-mail: alessandro.degiacomo@ba.imip.cnr.it; Dell' Aglio, M.; De Pascale, O. [MIP-CNR sec Bari (Italy); Longo, S.; Capitelli, M. [Department of Chemistry, University of Bari (Italy); MIP-CNR sec Bari (Italy)

    2007-12-15

    The classification of meteorites when geological analysis is unfeasible is generally made by the spectral line emission ratio of some characteristic elements. Indeed when a meteorite impacts Earth's atmosphere, hot plasma is generated, as a consequence of the braking effect of air, with the consequent ablation of the falling body. Usually, by the plasma emission spectrum, the meteorite composition is determined, assuming the Boltzmann equilibrium. The plasma generated during Laser Induced Breakdown Spectroscopy (LIBS) experiment shows similar characteristics and allows one to verify the mentioned method with higher accuracy. On the other hand the study of Laser Induced Breakdown Spectroscopy on meteorite can be useful for both improving meteorite classification methods and developing on-flight techniques for asteroid investigation. In this paper certified meteorites belonging to different typologies have been investigated by LIBS: Dofhar 461 (lunar meteorite), Chondrite L6 (stony meteorite), Dofhar 019 (Mars meteorite) and Sikhote Alin (irony meteorite)

  8. Laser-induced breakdown spectroscopy in Asia

    Science.gov (United States)

    Wang, Zhen-Zhen; Deguchi, Yoshihiro; Zhang, Zhen-Zhen; Wang, Zhe; Zeng, Xiao-Yan; Yan, Jun-Jie

    2016-12-01

    Laser-induced breakdown spectroscopy (LIBS) is an analytical detection technique based on atomic emission spectroscopy to measure the elemental composition. LIBS has been extensively studied and developed due to the non-contact, fast response, high sensitivity, real-time and multi-elemental detection features. The development and applications of LIBS technique in Asia are summarized and discussed in this review paper. The researchers in Asia work on different aspects of the LIBS study in fundamentals, data processing and modeling, applications and instrumentations. According to the current research status, the challenges, opportunities and further development of LIBS technique in Asia are also evaluated to promote LIBS research and its applications.

  9. Comparative investigation of partial least squares discriminant analysis and support vector machines for geological cuttings identification using laser-induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Tian, Ye; Wang, Zhennan [Optics and Optoelectronics Laboratory, Ocean University of China, Qingdao, Shandong 266100 (China); Han, Xiaoshuang [Optics and Optoelectronics Laboratory, Ocean University of China, Qingdao, Shandong 266100 (China); College of Electronic Information Engineering, Inner Mongolia University, Hohhot, Inner Mongolia 010021 (China); Hou, Huaming [Optics and Optoelectronics Laboratory, Ocean University of China, Qingdao, Shandong 266100 (China); Zheng, Ronger, E-mail: rzheng@ouc.edu.cn [Optics and Optoelectronics Laboratory, Ocean University of China, Qingdao, Shandong 266100 (China)

    2014-12-01

    With the hope of applying laser-induced breakdown spectroscopy (LIBS) to the geological logging field, a series of cutting samples were classified using LIBS coupled with chemometric methods. In this paper, we focused on a comparative investigation of the linear PLS-DA method and non-linear SVM method. Both the optimal PLS-DA model and SVM model were built by the leave-one-out cross-validation (LOOCV) approach with the calibration LIBS spectra, and then tested by validation spectra. We show that the performance of SVM is significantly better than PLS-DA because of its ability to address the non-linear relationships in LIBS spectra, with a correct classification rate of 91.67% instead of 68.34%, and an unclassification rate of 3.33% instead of 28.33%. To further improve the classification accuracy, we then designed a new classification approach by the joint analysis of PLS-DA and SVM models. With this method, 95% of the validation spectra are correctly classified and no unclassified spectra are observed. This work demonstrated that the coupling of LIBS with the non-linear SVM method has great potential to be used for on-line classification of geological cutting samples, and the combination of PLS-DA and SVM enables the cuttings identification with an excellent performance. - Highlights: • The geological cuttings were classified using LIBS coupled with chemometric methods. • The non-linear SVM showed significantly better performance than PLS-DA. • The joint analysis of PLS-DA and SVMs provided an excellent accuracy of 95%.

  10. Laser-Induced Breakdown Spectroscopy in Africa

    Directory of Open Access Journals (Sweden)

    M. A. Kasem

    2015-01-01

    Full Text Available Laser-induced breakdown spectroscopy (LIBS, known also as laser-induced plasma spectroscopy (LIPS, is a well-known spectrochemical elemental analysis technique. The field of LIBS has been rapidly matured as a consequence of growing interest in real-time analysis across a broad spectrum of applied sciences and recent development of commercial LIBS analytical systems. In this brief review, we introduce the contributions of the research groups in the African continent in the field of the fundamentals and applications of LIBS. As it will be shown, the fast development of LIBS in Africa during the last decade was mainly due to the broad environmental, industrial, archaeological, and biomedical applications of this technique.

  11. Medical Applications of Laser Induced Breakdown Spectroscopy

    Science.gov (United States)

    Pathak, A. K.; Rai, N. K.; Singh, Ankita; Rai, A. K.; Rai, Pradeep K.; Rai, Pramod K.

    2014-11-01

    Sedentary lifestyle of human beings has resulted in various diseases and in turn we require a potential tool that can be used to address various issues related to human health. Laser Induced Breakdown Spectroscopy (LIBS) is one such potential optical analytical tool that has become quite popular because of its distinctive features that include applicability to any type/phase of samples with almost no sample preparation. Several reports are available that discusses the capabilities of LIBS, suitable for various applications in different branches of science which cannot be addressed by traditional analytical methods but only few reports are available for the medical applications of LIBS. In the present work, LIBS has been implemented to understand the role of various elements in the formation of gallstones (formed under the empyema and mucocele state of gallbladder) samples along with patient history that were collected from Purvancal region of Uttar Pradesh, India. The occurrence statistics of gallstones under the present study reveal higher occurrence of gallstones in female patients. The gallstone occurrence was found more prevalent for those male patients who were having the habit of either tobacco chewing, smoking or drinking alcohols. This work further reports in-situ LIBS study of deciduous tooth and in-vivo LIBS study of human nail.

  12. Compact High Sensitive Laser-Induced Breakdown Spectroscopy Instrument Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Laser induced breakdown spectroscopy (LIBS) is a versatile tool for in situ substance characterization. Existing LIBS instruments are not compact enough for space...

  13. Laser-Induced Breakdown Spectroscopy: Capabilities and Applications

    Science.gov (United States)

    2010-07-01

    sample preparation. 14 6. References 1. Cremers D.A.; Radziemski, L. J. Handbook of Laser-Induced Breakdown Spectroscopy; West Sussex, England...30 (21), 2882–2884. 17. Salle, B.; Lacour, J. L.; Vors, E.; Fichet, P.; Maurice, S.; Cremers , D. A.; et al. Laser- Induced Breakdown Spectroscopy...90. Martin , M. Z.; Labbe, N.; Andre, N.; Harris, R.; Ebinger, M.; Wullschleger, S. D.; et al. High Resolution Applications of Laser-Induced

  14. Laser-Induced Breakdown Spectroscopy and Chlorophyll a Flourescence Transients

    DEFF Research Database (Denmark)

    Frydenvang, Jens

    of a sufficient quality; something that remains a problem for many in-situ methods. In my PhD, I present my work with two such in-situ methods, Laser-Induced Breakdown Spectroscopy (LIBS) and OJIP transients, the rising part of chlorophyll a fluorescence transients from dark-adapted leaves....

  15. Laser-Induced Breakdown Spectroscopy and Chlorophyll a Flourescence Transients

    DEFF Research Database (Denmark)

    Frydenvang, Jens

    of a sufficient quality; something that remains a problem for many in-situ methods. In my PhD, I present my work with two such in-situ methods, Laser-Induced Breakdown Spectroscopy (LIBS) and OJIP transients, the rising part of chlorophyll a fluorescence transients from dark-adapted leaves....

  16. Laser-Induced Breakdown Spectroscopy of Trace Metals

    Science.gov (United States)

    Simons, Stephen (Technical Monitor); VanderWal, Randall L.; Ticich, Thomas M.; West, Joseph R., Jr.

    2004-01-01

    An alternative approach for laser-induced breakdown spectroscopy (LIBS) determination of trace metal determination in liquids is demonstrated. The limits of detection (LOD) for the technique ranged from 10 ppb to 10 ppm for 15 metals metals (Mg, Al, Si, Ca, Ti, Cr, Fe, Co, Ni, Cu, Zn, As, Cd, Hg, Pb) tested.

  17. Compositional Analysis of Drugs by Laser-Induced Breakdown Spectroscopy

    Science.gov (United States)

    Beldjilali, S. A.; Axente, E.; Belasri, A.; Baba-Hamed, T.; Hermann, J.

    2017-07-01

    The feasibility of the compositional analysis of drugs by calibration-free laser-induced breakdown spectroscopy (LIBS) was investigated using multivitamin tablets as a sample material. The plasma was produced by a frequencyquadrupled Nd:YAG laser delivering UV pulses with a duration of 5 ns and an energy of 12 mJ, operated at a repetition rate of 10 Hz. The relative fractions of the elements composing the multivitamin drug were determined by comparing the emission spectrum of the laser-produced plume with the spectral radiance computed for a plasma in a local thermodynamic equilibrium. Fair agreement of the measured fractions with those given by the manufacturer was observed for all elements mentioned in the leafl et of the drug. Additional elements such as Ca, Na, Sr, Al, Li, K, and Si were detected and quantifi ed. The present investigations demonstrate that laser-induced breakdown spectroscopy is a viable technique for the quality control of drugs.

  18. Time-resolved laser-induced breakdown spectroscopy of aluminum

    Institute of Scientific and Technical Information of China (English)

    LIU Xian-yun; ZHANG Wei-jun; WANG Zhen-ya; HAO Li-qing; HUANG Ming-qiang; ZHAO Wen-wu; LONG Bo; Zhao Wei

    2008-01-01

    We develop a system to measure the elemental composition of unprepared samples using laser-induced breakdown spectroscopy (LIBS) in our laboratory, which can be used for the determination of elements in solids, liquids and aerosols. A description of the instrumentation, including laser, sample chamber and detection, is followed by a brief discussion. The time-resolved LIBS of aluminum at atmospheric pressure is presented. At the end, the possibilities and later uses of this technique are briefly discussed.

  19. Laser-Induced Breakdown Spectroscopy: Fundamentals, Applications, and Challenges

    OpenAIRE

    Anabitarte, F.; Cobo, A.; J. M. Lopez-Higuera

    2012-01-01

    Laser-induced breakdown spectroscopy (LIBS) is a technique that provides an accurate in situ quantitative chemical analysis and, thanks to the developments in new spectral processing algorithms in the last decade, has achieved a promising performance as a quantitative chemical analyzer at the atomic level. These possibilities along with the fact that little or no sample preparation is necessary have expanded the application fields of LIBS. In this paper, we review the state of the ar...

  20. Trace metal mapping by laser-induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Kaiser, Jozef [ORNL; Novotny, Dr. Karel [Masaryk University; Hrdlicka, A [Brno University of Technology, Czech Republic; Malina, R [Brno University of Technology, Czech Republic; Hartl, M [Brno University of Technology, Czech Republic; Kizek, R [Mendel University of Brno; Adam, V [Mendel University of Brno

    2012-01-01

    Abstract: Laser-Induced Breakdown Spectroscopy (LIBS) is a sensitive optical technique capable of fast multi-elemental analysis of solid, gaseous and liquid samples. The potential applications of lasers for spectrochemical analysis were developed shortly after its invention; however the massive development of LIBS is connected with the availability of powerful pulsed laser sources. Since the late 80s of 20th century LIBS dominated the analytical atomic spectroscopy scene and its application are developed continuously. Here we review the utilization of LIBS for trace elements mapping in different matrices. The main emphasis is on trace metal mapping in biological samples.

  1. Biomedical and environmental applications of laser-induced breakdown spectroscopy

    Indian Academy of Sciences (India)

    V K Unnikrishnan; K S Choudhari; Suresh D Kulkarni; Rajesh Nayak; V B Kartha; C Santhosh; B M Suri

    2014-02-01

    Laser-induced breakdown spectroscopy (LIBS) is an emerging analytical technique with numerous advantages such as rapidity, multi-elemental analysis, minimal sample preparation, minimal destruction, low cost and versatility of being applied to a wide range of materials. In this paper, we report the preliminary observations we obtained using LIBS for clinical and environmental samples. Elemental analysis has been done qualitatively in human teeth samples which show encouraging results. It has also been demonstrated in this paper that LIBS can be very well utilized in field applications such as plastic waste sorting and recycling.

  2. Plasma temperature clamping in filamentation laser induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Harilal, Sivanandan S.; Yeak, J.; Phillips, Mark C.

    2015-10-19

    Ultrafast laser filament induced breakdown spectroscopy is a very promising method for remote material detection. We present characteristics of plasmas generated in a metal target by laser filaments in air. Our measurements show that the temperature of the ablation plasma is clamped along the filamentation channel due to intensity clamping in a filament. Nevertheless, significant changes in radiation intensity are noticeable, and this is essentially due to variation in the number density of emitting atoms. The present results also partly explains the reason for the occurrence of atomic plume during fs LIBS in air compared to long-pulse ns LIBS.

  3. Controlled calibration method for laser induced breakdown spectroscopy

    Institute of Scientific and Technical Information of China (English)

    Li Wang; Chijian Zhang; Yuan Feng

    2008-01-01

    Laser induced breakdown spectroscopy (LIBS) is a potential technique for rapid analysis of samples present in solids, gases and liquids. In the last two decades it was an object of extensive studies. Controlled calibration method used to analysis the LIBS spectra is investigated. Compared with the inner calibration and calibration-free (CF) methods, this new method overcomes "matrix effect", and demonstrates a better ability to cope with the spectra. It is used to analyze natural soil, and errors of the concentration are decreased about 5%. The result shows that the new method is feasible and accurate.

  4. Progress in fieldable laser-induced breakdown spectroscopy (LIBS)

    Science.gov (United States)

    Miziolek, Andrzej W.

    2012-06-01

    In recent years there has been great progress in the Laser Induced Breakdown Spectroscopy (LIBS) technology field. Significant advances have been made both in fundamental and applied research as well as in data processing/chemometrics. Improvements in components, most notably lasers/optics and spectrometers are enabling the development of new devices that are suitable for field use. These new commercial devices recently released to the marketplace, as well as ones currently under development, are bringing the potential of LIBS for CBRNE threat analysis into real-world applications.

  5. Automatic classification of laser-induced breakdown spectroscopy (LIBS) data of protein biomarker solutions.

    Science.gov (United States)

    Pokrajac, David; Lazarevic, Aleksandar; Kecman, Vojislav; Marcano, Aristides; Markushin, Yuri; Vance, Tia; Reljin, Natasa; McDaniel, Samantha; Melikechi, Noureddine

    2014-01-01

    We perform multi-class classification of laser-induced breakdown spectroscopy data of four commercial samples of proteins diluted in phosphate-buffered saline solution at different concentrations: bovine serum albumin, osteopontin, leptin, and insulin-like growth factor II. We achieve this by using principal component analysis as a method for dimensionality reduction. In addition, we apply several different classification algorithms (K-nearest neighbor, classification and regression trees, neural networks, support vector machines, adaptive local hyperplane, and linear discriminant classifiers) to perform multi-class classification. We achieve classification accuracies above 98% by using the linear classifier with 21-31 principal components. We obtain the best detection performance for neural networks, support vector machines, and adaptive local hyperplanes for a range of the number of principal components with no significant differences in performance except for that of the linear classifier. With the optimal number of principal components, a simplistic K-nearest classifier still provided acceptable results. Our proposed approach demonstrates that highly accurate automatic classification of complex protein samples from laser-induced breakdown spectroscopy data can be successfully achieved using principal component analysis with a sufficiently large number of extracted features, followed by a wrapper technique to determine the optimal number of principal components.

  6. Quantitative analysis of gallstones using laser-induced breakdown spectroscopy.

    Science.gov (United States)

    Singh, Vivek K; Singh, Vinita; Rai, Awadhesh K; Thakur, Surya N; Rai, Pradeep K; Singh, Jagdish P

    2008-11-01

    The utility of laser-induced breakdown spectroscopy (LIBS) for categorizing different types of gallbladder stone has been demonstrated by analyzing their major and minor constituents. LIBS spectra of three types of gallstone have been recorded in the 200-900 nm spectral region. Calcium is found to be the major element in all types of gallbladder stone. The spectrophotometric method has been used to classify the stones. A calibration-free LIBS method has been used for the quantitative analysis of metal elements, and the results have been compared with those obtained from inductively coupled plasma atomic emission spectroscopy (ICP-AES) measurements. The single-shot LIBS spectra from different points on the cross section (in steps of 0.5 mm from one end to the other) of gallstones have also been recorded to study the variation of constituents from the center to the surface. The presence of different metal elements and their possible role in gallstone formation is discussed.

  7. Laser-induced breakdown spectroscopy theory and applications

    CERN Document Server

    Perini, Umberto

    2014-01-01

    This book deals with the Laser-Induced Breakdown Spectroscopy (LIBS), a widely used atomic emission spectroscopy technique for elemental analysis of materials. It is based on the use of a high-power, short pulse laser excitation. The book is divided into two main sections: the first one concerning theoretical aspects of the technique, the second one describing the state of the art in applications of the technique in different scientific/technological areas. Numerous examples of state of the art applications provide the readers an almost complete scenario of the LIBS technique. The LIBS theoretical aspects are reviewed. The book helps the readers who are less familiar with the technique to understand the basic principles. Numerous examples of state of the art applications give an almost complete scenario of the LIBS technique potentiality. These examples of applications may have a strong impact on future industrial utilization. The authors made important contributions to the development of this field.

  8. Comparison of laser induced breakdown spectroscopy and spark induced breakdown spectroscopy for determination of mercury in soils

    Energy Technology Data Exchange (ETDEWEB)

    Srungaram, Pavan K.; Ayyalasomayajula, Krishna K.; Yu-Yueh, Fang; Singh, Jagdish P., E-mail: singh@icet.msstate.edu

    2013-09-01

    Mercury is a toxic element found throughout the environment. Elevated concentrations of mercury in soils are quite hazardous to plants growing in these soils and also the runoff of soils to nearby water bodies contaminates the water, endangering the flora and fauna of that region. This makes continuous monitoring of mercury very essential. This work compares two potential spectroscopic methods (laser induced breakdown spectroscopy (LIBS) and spark induced breakdown spectroscopy (SIBS)) at their optimum experimental conditions for mercury monitoring. For LIBS, pellets were prepared from soil samples of known concentration for generating a calibration curve while for SIBS, soil samples of known concentration were used in the powder form. The limits of detection (LODs) of Hg in soil were calculated from the Hg calibration curves. The LOD for mercury in soil calculated using LIBS and SIBS is 483 ppm and 20 ppm, respectively. The detection range for LIBS and SIBS is discussed. - Highlights: • We compared SIBS and LIBS for mercury (Hg) measurements in soil. • Hg 546.07 nm line was selected for both LIBS and SIBS measurements. • Limit of detection for Hg was found to be 20 ppm with SIBS and 483 ppm with LIBS.

  9. 基于支持向量机回归的水体重金属激光诱导击穿光谱定量分析研究%Quantitative Analysis of Laser-Induced Breakdown Spectroscopy of Heavy Metals in Water Based on Support-Vector-Machine Regression

    Institute of Scientific and Technical Information of China (English)

    王春龙; 刘建国; 赵南京; 马明俊; 王寅; 胡丽; 张大海; 余洋; 孟德硕

    2013-01-01

    建立了基于自适应核的激光诱导击穿光谱支持向量机回归定量分析模型.通过石墨富集、洛伦兹拟合和碳内标归一化,增强等离子体信号强度,减小环境噪声和能量抖动对水体重金属浓度测量的影响.实现了基于支持向量机回归智能算法的激光诱导击穿光谱定量分析.铅铜的平均相对标准偏差分别为6.4361%和6.9291%,最大相对标准偏差分别为9.1009%和8.9280%,平均相对误差分别为1.6765%和1.2478%,最大相对误差分别为5.5759%和4.2604%,相关系数分别为0.9979和0.9997.该研究为进一步实现水中痕量金属元素的快速定量分析提供了方法和数据参考.%The quantitative analysis model of laser-induced breakdown spectroscopy with adaptive kernel is established. Effect of ambient noise and energy jitter in measured density of heavy metals is gradually removed by Lorentz fitting and carbon normalization, and the intensity of plasmas is enhanced by graphite enrichment. Quantitative analysis of laser-induced breakdown spectroscopy based on regression intelligent algorithm of support vector machine is achieved. The average relative standard deviations of lead and copper are 6.4361 % and 6.9291 % , and the maximum standard deviations are 9.1009% and 8. 9280% . The average relative errors of lead and copper are 1.6765% and 1.2478 %, and the maximum relative errors are 5. 5759% and4.2604%. The correlation coefficients of lead and copper are 0. 9979 and 0. 9997. Methods and reference data are provided for the further study of fast measurement of trace heavy metals in water by laser-induced breakdown spectroscopy.

  10. Apparatus, system, and method for laser-induced breakdown spectroscopy

    Science.gov (United States)

    Effenberger, Jr., Andrew J; Scott, Jill R; McJunkin, Timothy R

    2014-11-18

    In laser-induced breakdown spectroscopy (LIBS), an apparatus includes a pulsed laser configured to generate a pulsed laser signal toward a sample, a constructive interference object and an optical element, each located in a path of light from the sample. The constructive interference object is configured to generate constructive interference patterns of the light. The optical element is configured to disperse the light. A LIBS system includes a first and a second optical element, and a data acquisition module. The data acquisition module is configured to determine an isotope measurement based, at least in part, on light received by an image sensor from the first and second optical elements. A method for performing LIBS includes generating a pulsed laser on a sample to generate light from a plasma, generating constructive interference patterns of the light, and dispersing the light into a plurality of wavelengths.

  11. Detection of early caries by laser-induced breakdown spectroscopy

    Science.gov (United States)

    Sasazawa, Shuhei; Kakino, Satoko; Matsuura, Yuji

    2015-07-01

    To improve sensitivity of dental caries detection by laser-induced breakdown spectroscopy (LIBS) analysis, it is proposed to utilize emission peaks in the ultraviolet. We newly focused on zinc whose emission peaks exist in ultraviolet because zinc exists at high concentration in the outer layer of enamel. It was shown that by using ratios between heights of an emission peak of Zn and that of Ca, the detection sensitivity and stability are largely improved. It was also shown that early caries are differentiated from healthy part by properly setting a threshold in the detected ratios. The proposed caries detection system can be applied to dental laser systems such as ones based on Er:YAG-lasers. When ablating early caries part by laser light, the system notices the dentist that the ablation of caries part is finished. We also show the intensity of emission peaks of zinc decreased with ablation with Er:YAG laser light.

  12. Laser-induced breakdown spectroscopy fundamentals and applications

    CERN Document Server

    Noll, Reinhard

    2012-01-01

    This book is a comprehensive source of the fundamentals, process parameters, instrumental components and applications of laser-induced breakdown spectroscopy (LIBS). The effect of multiple pulses on material ablation, plasma dynamics and plasma emission is presented. A heuristic plasma modeling allows to simulate complex experimental plasma spectra. These methods and findings form the basis for a variety of applications to perform quantitative multi-element analysis with LIBS. These application potentials of LIBS have really boosted in the last years ranging from bulk analysis of metallic alloys and non-conducting materials, via spatially resolved analysis and depth profiling covering measuring objects in all physical states: gaseous, liquid and solid. Dedicated chapters present LIBS investigations for these tasks with special emphasis on the methodical and instrumental concepts as well as the optimization strategies for a quantitative analysis. Requirements, concepts, design and characteristic features of LI...

  13. Spectrum standardization for laser-induced breakdown spectroscopy measurements

    CERN Document Server

    Wang, Zhe; West, Logan; Li, Zheng; Ni, Weidou

    2011-01-01

    This paper presents a spectra normalization method for laser-induced breakdown spectroscopy (LIBS) measurements by converting the recorded characteristic line intensity at varying conditions to the intensity under a standard condition with standard plasma temperature, degree of ionization, and total number density of the interested species to reduce the measurement uncertainty. The characteristic line intensities of the interested species are first converted to the intensity at a fixed temperature and standard degree of ionization but varying total number density for each laser pulse analysis. Under this state, if the influence of the variation of plasma morphology is neglected, the sum of multiple spectral line intensities for the measured element can be regarded proportional to the total number density of the specific element, and the fluctuation of the total number density, or the variation of ablation mass, was compensated for by the application of this relationship. In the experiments with 29 brass alloy...

  14. Elemental Analysis of Soils by Laser Induced Breakdown Spectroscopy

    Science.gov (United States)

    Gondal, Mohammed Ashraf; Dastageer, Mohamed A.

    The chemical and elemental composition of soil is very complex as it contains many constituents like minerals, organic matters, living organisms, fossils, air and water. Considering the diversity of soil contents, quality and usability, a systematic scientific study on the elemental and chemical composition of soil is very important. In order to study the chemical composition of soil, Laser induced breakdown spectroscopy (LIBS) has been applied recently. The important features of LIBS system and its applications for the measurement of nutrients in green house soil, on-line monitoring of remediation process of chromium polluted soil, determination of trace elements in volcanic erupted soil samples collected from ancient cenozoic lava eruption sites and detection of toxic metals in Gulf war oil spill contaminated soil using LIBS are described in this chapter.

  15. Analysis of fresco by laser induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Caneve, L., E-mail: luisa.caneve@enea.i [ENEA, CR Frascati, Via E. Fermi 45, 00044 Frascati (Italy); Diamanti, A. [Universita ' Tor Vergata' , Dipartimento di Scienze e Tecnologie Chimiche, via della Ricerca Scientifica 1, 00133 Roma (Italy); Grimaldi, F. [ENEA, CR Frascati, Via E. Fermi 45, 00044 Frascati (Italy); Palleschi, G. [Universita ' Tor Vergata' , Dipartimento di Scienze e Tecnologie Chimiche, via della Ricerca Scientifica 1, 00133 Roma (Italy); Spizzichino, V. [ENEA, CR Frascati, Via E. Fermi 45, 00044 Frascati (Italy); Valentini, F. [Universita ' Tor Vergata' , Dipartimento di Scienze e Tecnologie Chimiche, via della Ricerca Scientifica 1, 00133 Roma (Italy)

    2010-08-15

    The laser-based techniques have been shown to be a very powerful tool for artworks characterization and are used in the field of cultural heritage for the offered advantages of minimum invasiveness, in situ applicability and high sensitivity. Laser induced breakdown spectroscopy, in particular, has been applied in this field to many different kinds of ancient materials with successful results. In this work, a fragment of a Roman wall painting from the archaeological area of Pompeii has been investigated by LIBS. The sample elemental composition resulting from LIBS measurements suggested the presence of certain pigments. The ratio of the intensities of different lines related to some characteristic elements is proposed as an indicator for pigment recognition. The depth profiling permitted to put in evidence the presence of successive paint layers with different compositions. A comparison with the results obtained by the microscopy inspection of the sample has been done.

  16. Analysis of fresco by laser induced breakdown spectroscopy

    Science.gov (United States)

    Caneve, L.; Diamanti, A.; Grimaldi, F.; Palleschi, G.; Spizzichino, V.; Valentini, F.

    2010-08-01

    The laser-based techniques have been shown to be a very powerful tool for artworks characterization and are used in the field of cultural heritage for the offered advantages of minimum invasiveness, in situ applicability and high sensitivity. Laser induced breakdown spectroscopy, in particular, has been applied in this field to many different kinds of ancient materials with successful results. In this work, a fragment of a Roman wall painting from the archaeological area of Pompeii has been investigated by LIBS. The sample elemental composition resulting from LIBS measurements suggested the presence of certain pigments. The ratio of the intensities of different lines related to some characteristic elements is proposed as an indicator for pigment recognition. The depth profiling permitted to put in evidence the presence of successive paint layers with different compositions. A comparison with the results obtained by the microscopy inspection of the sample has been done.

  17. Analytical study of seashell using laser-induced breakdown spectroscopy

    Science.gov (United States)

    Ying, LI; Yanhong, GU; Ying, Zhang; Yuandong, LI; Yuan, LU

    2017-02-01

    Seashell has been applied as an indicator for ocean research and element analysis of the seashell is used to track biological or environmental evolution. In this work, laser-induced breakdown spectroscopy (LIBS) was applied for elementary analysis of an ezo scallop-shell, and a graphite enrichment method was used as the assistance. It was found that LIBS signal intensity of Ca fluctuated less than 5%, in spite of the sampling positions, and Sr/Ca was related to the shell growth. A similar variation was also found when using a direct LIBS analysis on the shell surface, and it might be more practicable to track shell growth by investigating Sr/Ca ratio with Sr ionic line at 421.6 nm. The obtained results prove that calcium (Ca) is qualified as an internal reference for shell analysis, and LIBS is a potential analytical method for seashell study.

  18. Detection of Anomalies in Citrus Leaves Using Laser-Induced Breakdown Spectroscopy (LIBS).

    Science.gov (United States)

    Sankaran, Sindhuja; Ehsani, Reza; Morgan, Kelly T

    2015-08-01

    Nutrient assessment and management are important to maintain productivity in citrus orchards. In this study, laser-induced breakdown spectroscopy (LIBS) was applied for rapid and real-time detection of citrus anomalies. Laser-induced breakdown spectroscopy spectra were collected from citrus leaves with anomalies such as diseases (Huanglongbing, citrus canker) and nutrient deficiencies (iron, manganese, magnesium, zinc), and compared with those of healthy leaves. Baseline correction, wavelet multivariate denoising, and normalization techniques were applied to the LIBS spectra before analysis. After spectral pre-processing, features were extracted using principal component analysis and classified using two models, quadratic discriminant analysis and support vector machine (SVM). The SVM resulted in a high average classification accuracy of 97.5%, with high average canker classification accuracy (96.5%). LIBS peak analysis indicated that high intensities at 229.7, 247.9, 280.3, 393.5, 397.0, and 769.8 nm were observed of 11 peaks found in all the samples. Future studies using controlled experiments with variable nutrient applications are required for quantification of foliar nutrients by using LIBS-based sensing.

  19. Analysis of Pulverized Coal by Laser-Induced Breakdown Spectroscopy

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Laser-induced breakdown spectroscopy (LIBS) has been used to detect atomic species in various environments. The quantitative analysis (C, H, O, N and S) of representative coal samples are being carried out with LIBS, and the effects of particle size are analyzed.A powerful pulse Nd:YAG laser is focused on the coal sample at atmosphere pressure, and the emission spectra from laser-induced plasmas are measured by time-resolved spectroscopy, and the intensity of analyzed spectral lines is obtained through observing the laser plasma with a delay time of 0.4μs. The experimental results show that the slope of calibration curve is nearly 1 when the concentration of the analyzed element is relatively low, and the slope of curve is nearly 0.5 when the concentration of C is higher than other elements. In addition, using the calibration-free model without self-absorption effect, the results show that the decreasing of particle size leads to an increase of the plasma temperature.

  20. Discrimination of forensic trace evidence using laser induced breakdown spectroscopy

    Science.gov (United States)

    Bridge, Candice Mae

    Elemental analysis in forensic laboratories can be tedious and many trace evidence items are not analyzed to determine their elemental composition. Presently, scanning electron microscopy-energy dispersive x-ray spectroscopy (SEM-EDS) is the primary analytical tool for determining the elemental composition of trace evidence items. However, due to the time it takes to obtain the required vacuum and the limited number of samples that can be analyzed at any one time, SEM-EDS can be impractical for a high volume of evidence items. An alternative instrument that can be used for this type of analysis is laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). While LA-ICP-MS is a very precise and quantitative analytical method that determines elemental composition based on isotopic mass measurements; however, the instrumentation is relatively expensive and therefore is budgetarily prohibitive for many forensic laboratories. It is the purpose of this research to evaluate an inexpensive instrument that can potentially provide rapid elemental analysis for many forensic laboratories. Laser induced breakdown spectroscopy (LIBS) is an analytical method that meets these requirements and offers information about the elemental composition based on ionic, atomic and diatomic molecular emissions.

  1. Enhancing the analytical performance of laser-induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Cremers, D.A.; Chinni, R.C.; Pichahchy, A.E.; Thornquist, H.K.

    1998-12-31

    This is the final report of a one-year, Laboratory Directed Research and Development (LDRD) project at Los Alamos National Laboratory (LANL). The objective of this work is to enhance the analytical capabilities of laser-induced breakdown spectroscopy (LIBS). LIBS is a method of elemental analysis in which powerful laser pulses are focused on a sample to form a microplasma. LIBS is perhaps the most versatile elemental analysis method, applicable to a variety of different real-world analysis problems. Therefore, it is important to enhance the capabilities of the method as much as possible. Accomplishments include: (1) demonstration of signal enhancements of 5--30 times from soils and metals using a double pulse method; (2) development of a model of the observed enhancement obtained using double pulses; (3) demonstration that the analytical performance achievable using low laser-pulse energies (10 and 25 mJ) can match that achievable using an energy of 100 mJ; and (4) demonstration that time-gated detection is not necessary with LIBS.

  2. Fast analysis of wood preservers using laser induced breakdown spectroscopy

    Science.gov (United States)

    Uhl, A.; Loebe, K.; Kreuchwig, L.

    2001-06-01

    Laser-induced breakdown spectroscopy (LIBS) is used for the investigation of wood preservers in timber and in furniture. Both experiments in laboratory and practical applications in recycling facilities and on a building site prove the new possibilities for the fast detection of harmful agents in wood. A commercial system was developed for mobile laser-plasma-analysis as well as for industrial use in sorting plants. The universal measuring principle in combination with an Echelle optics permits real simultaneous multi-element-analysis in the range of 200-780 nm with a resolution of a few picometers. It enables the user to detect main and trace elements in wood within a few seconds, nearly independent of the matrix, knowing that different kinds of wood show an equal elemental composition. Sample preparation is not required. The quantitative analysis of inorganic wood preservers (containing, e.g. Cu, Cr, B, As, Pb, Hg) has been performed exactly using carbon as reference element. It can be shown that the detection limits for heavy metals in wood are in the ppm-range. Additional information is given concerning the quantitative analysis. Statistical data, e.g. the standard deviation (S.D.), were determined and calibration curves were used for each particular element. A comparison between ICP-AES and LIBS is given using depth profile correction factors regarding the different penetration depths with respect to the different volumes in wood analyzed by both analytical methods.

  3. Laser induced breakdown spectroscopy with picosecond pulse train

    Science.gov (United States)

    Lednev, Vasily N.; Pershin, Sergey M.; Sdvizhenskii, Pavel A.; Grishin, Mikhail Ya; Davydov, Mikhail A.; Stavertiy, Anton Ya; Tretyakov, Roman S.

    2017-02-01

    Picosecond pulse train and nanosecond pulse were compared for laser ablation and laser induced breakdown spectroscopy (LIBS) measurements. A detailed study revealed that the picosecond pulse train ablation improved the quality of laser craters (symmetric crater walls and the absence of large redeposited droplets), which was explained by a smaller heat affected zone and suppression of melt splash. Greater plasma dimensions and brighter plasma emission were observed by gated imaging for picosecond pulse train compared to nanosecond pulse ablation. Increased intensity of atomic and ionic lines in gated and time integrated spectra provided better signal-to-noise ratio for picosecond pulse train sampling. Higher temperature and electron density were detected during first microsecond for the plasma induced by the picosecond pulse train. Improved shot-to-shot reproducibility for atomic/ionic line intensity in the case of picosecond pulse train LIBS was explained by more effective atomization of target material in plasma and better quality of laser craters. Improved precision and limits of detections were determined for picosecond pulse train LIBS due to better reproducibility of laser sampling and increased signal-to-noise ratio.

  4. Laser-induced breakdown spectroscopy of tantalum plasma

    Energy Technology Data Exchange (ETDEWEB)

    Khan, Sidra; Bashir, Shazia; Hayat, Asma; Khaleeq-ur-Rahman, M.; Faizan–ul-Haq [Centre for Advanced Studies in Physics, GC University, Lahore (Pakistan)

    2013-07-15

    Laser Induced Breakdown spectroscopy (LIBS) of Tantalum (Ta) plasma has been investigated. For this purpose Q-switched Nd: YAG laser pulses (λ∼ 1064 nm, τ∼ 10 ns) of maximum pulse energy of 100 mJ have been employed as an ablation source. Ta targets were exposed under the ambient environment of various gases of Ar, mixture (CO{sub 2}: N{sub 2}: He), O{sub 2}, N{sub 2}, and He under various filling pressure. The emission spectrum of Ta is observed by using LIBS spectrometer. The emission intensity, excitation temperature, and electron number density of Ta plasma have been evaluated as a function of pressure for various gases. Our experimental results reveal that the optical emission intensity, the electron temperature and density are strongly dependent upon the nature and pressure of ambient environment. The SEM analysis of the ablated Ta target has also been carried out to explore the effect of ambient environment on the laser induced grown structures. The growth of grain like structures in case of molecular gases and cone-formation in case of inert gases is observed. The evaluated plasma parameters by LIBS analysis such as electron temperature and the electron density are well correlated with the surface modification of laser irradiated Ta revealed by SEM analysis.

  5. Measurement of Irradiated Pyroprocessing Samples via Laser Induced Breakdown Spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Phongikaroon, Supathorn [Virginia Commonwealth Univ., Richmond, VA (United States)

    2016-10-31

    The primary objective of this research is to develop an applied technology and provide an assessment to remotely measure and analyze the real time or near real time concentrations of used nuclear fuel (UNF) dissolute in electrorefiners. Here, Laser-Induced Breakdown Spectroscopy (LIBS), in UNF pyroprocessing facilities will be investigated. LIBS is an elemental analysis method, which is based on the emission from plasma generated by focusing a laser beam into the medium. This technology has been reported to be applicable in the media of solids, liquids (includes molten metals), and gases for detecting elements of special nuclear materials. The advantages of applying the technology for pyroprocessing facilities are: (i) Rapid real-time elemental analysis|one measurement/laser pulse, or average spectra from multiple laser pulses for greater accuracy in < 2 minutes; (ii) Direct detection of elements and impurities in the system with low detection limits|element specific, ranging from 2-1000 ppm for most elements; and (iii) Near non-destructive elemental analysis method (about 1 g material). One important challenge to overcome is achieving high-resolution spectral analysis to quantitatively analyze all important fission products and actinides. Another important challenge is related to accessibility of molten salt, which is heated in a heavily insulated, remotely operated furnace in a high radiation environment with an argon atmosphere.

  6. Analysis of bakery products by laser-induced breakdown spectroscopy.

    Science.gov (United States)

    Bilge, Gonca; Boyacı, İsmail Hakkı; Eseller, Kemal Efe; Tamer, Uğur; Çakır, Serhat

    2015-08-15

    In this study, we focused on the detection of Na in bakery products by using laser-induced breakdown spectroscopy (LIBS) as a quick and simple method. LIBS experiments were performed to examine the Na at 589 nm to quantify NaCl. A series of standard bread sample pellets containing various concentrations of NaCl (0.025-3.5%) were used to construct the calibration curves and to determine the detection limits of the measurements. Calibration graphs were drawn to indicate functions of NaCl and Na concentrations, which showed good linearity in the range of 0.025-3.5% NaCl and 0.01-1.4% Na concentrations with correlation coefficients (R(2)) values greater than 0.98 and 0.96. The obtained detection limits for NaCl and Na were 175 and 69 ppm, respectively. Performed experimental studies showed that LIBS is a convenient method for commercial bakery products to quantify NaCl concentrations as a rapid and in situ technique.

  7. Dust Removal on Mars Using Laser-Induced Breakdown Spectroscopy

    Science.gov (United States)

    Graff, T. G.; Morris, R. V.; Clegg, S. M.; Wiens, R. C.; Anderson, R. B.

    2011-01-01

    Dust coatings on the surface of Mars complicate and, if sufficiently thick, mask the spectral characteristics and compositional determination of underlying material from in situ and remote sensing instrumentation. The Laser-Induced Breakdown Spectroscopy (LIBS) portion of the Chemistry & Camera (ChemCam) instrument, aboard the Mars Science Laboratory (MSL) rover, will be the first active remote sensing technique deployed on Mars able to remove dust. ChemCam utilizes a 5 ns pulsed 1067 nm high-powered laser focused to less than 400 m diameter on targets at distances up to 7 m [1,2]. With multiple laser pulses, dust and weathering coatings can be remotely analyzed and potentially removed using this technique [2,3]. A typical LIBS measurement during MSL surface operations is planned to consist of 50 laser pulses at 14 mJ, with the first 5 to 10 pulses used to analyze as well as remove any surface coating. Additionally, ChemCam's Remote Micro-Imager (RMI) is capable of resolving 200 m details at a distance of 2 m, or 1 mm at 10 m [1,4]. In this study, we report on initial laboratory experiments conducted to characterize the removal of dust coatings using similar LIBS parameters as ChemCam under Mars-like conditions. These experiments serve to better understand the removal of surface dust using LIBS and to facilitate the analysis of ChemCam LIBS spectral data and RMI images.

  8. Analysis of human nails by laser-induced breakdown spectroscopy.

    Science.gov (United States)

    Hosseinimakarem, Zahra; Tavassoli, Seyed Hassan

    2011-05-01

    Laser-induced breakdown spectroscopy (LIBS) is applied to analyze human fingernails using nanosecond laser pulses. Measurements on 45 nail samples are carried out and 14 key species are identified. The elements detected with the present system are: Al, C, Ca, Fe, H, K, Mg, N, Na, O, Si, Sr, Ti as well as CN molecule. Sixty three emission lines have been identified in the spectrum that are dominated by calcium lines. A discriminant function analysis is used to discriminate among different genders and age groups. This analysis demonstrates efficient discrimination among these groups. The mean concentration of each element is compared between different groups. Correlation between concentrations of elements in fingernails is calculated. A strong correlation is found between sodium and potassium while calcium and magnesium levels are inversely correlated. A case report on high levels of sodium and potassium in patients with hyperthyroidism is presented. It is shown that LIBS could be a promising technique for the analysis of nails and therefore identification of health problems.

  9. Laser-induced breakdown spectroscopy for polymer identification.

    Science.gov (United States)

    Grégoire, Sylvain; Boudinet, Marjorie; Pelascini, Frédéric; Surma, Fabrice; Detalle, Vincent; Holl, Yves

    2011-07-01

    This study aims at differentiating several organic materials, particularly polymers, by laser induced breakdown spectroscopy. The goal is to apply this technique to the fields of polymer recycling and cultural heritage conservation. We worked with some usual polymers families: polyethylene (PE), polypropylene (PP), polyoxymethylene, (POM), poly(vinyl chloride), polytetrafluoroethylene, polyoxyethylene (POE), and polyamide for the aliphatic ones, and poly(butylene terephthalate), acrylonitrile-butadiene-styrene, polystyrene, and polycarbonate for the aromatic ones. The fourth harmonic of a Nd:YAG laser (266 nm) in ambient air at atmospheric pressure was used. A careful analysis of the C(2) Swan system (0,0) band in polymers containing no C-C (POM), few C-C (POE), or aromatic C-C linkages led us to the conclusion that the C(2) signal might be native, i.e., the result of direct ablation from the sample. With use of these results, aliphatic and aromatic polymers could be differentiated. Further data treatments, such as properly chosen line ratios, principal component analysis, and partial least squares regression, were evaluated. It was shown that many polymers could be separated, including PE and PP, despite their similar chemical structures.

  10. Unsupervised verification of laser-induced breakdown spectroscopy dataset clustering

    Science.gov (United States)

    Wójcik, Michał R.; Zdunek, Rafał; Antończak, Arkadiusz J.

    2016-12-01

    Laser-induced breakdown spectroscopy is a versatile, optical technique used in a wide range of qualitative and quantitative analyses conducted with the use of various chemometric techniques. The aim of this research is to demonstrate the possibility of unsupervised clustering of an unknown dataset using K-means clustering algorithm, and verifying its input parameters through investigating generalized eigenvalues derived with linear discriminant analysis. In all the cases, principal component analyses have been applied to reduce data dimensionality and shorten computation time of the whole operation. The experiment was conducted on a dataset collected from twenty four different materials divided into six groups: metals, semiconductors, ceramics, rocks, metal alloys and others with the use of a three-channel spectrometer (298.02-628.73nm overall spectral range) and a UV (248nm) excimer laser. Additionally, two more complex groups containing all specimens and all specimens excluding rocks were created. The resulting spaces of eigenvalues were calculated for every group and three different distances in the multidimensional space (cosine, square Euclidean and L1). As expected, the correct numbers of specimens within groups with small deviations were obtained, and the validity of the unsupervised method has thus been proven.

  11. Study of Bacterial Samples Using Laser Induced Breakdown Spectroscopy

    Science.gov (United States)

    W, A. Farooq; M, Atif; W, Tawfik; M, S. Alsalhi; Z, A. Alahmed; M, Sarfraz; J, P. Singh

    2014-12-01

    Laser-induced breakdown spectroscopy (LIBS) technique has been applied to investigate two different types of bacteria, Escherichia coli (B1) and Micrococcus luteus (B2) deposited on glass slides using Spectrolaser 7000. LIBS spectra were analyzed using spectrolaser software. LIBS spectrum of glass substrate was compared with bacteria spectra. Ca, Mg, Na, K, P, S, Cl, Fe, Al, Mn, Cu, C, H and CN-band appeared in bacterial samples in air. Two carbon lines at 193.02 nm, 247.88 nm and one hydrogen line at 656.28 nm with intensity ratios of 1.9, 1.83 and 1.53 appeared in bacterial samples B1 and B2 respectively. Carbon and hydrogen are the important components of the bio-samples like bacteria and other cancer cells. Investigation on LIBS spectra of the samples in He and Ar atmospheres is also presented. Ni lines appeared only in B2 sample in Ar atmosphere. From the present experimental results we are able to show that LIBS technique has a potential in the identification and discrimination of different types of bacteria.

  12. Application of Laser Induced Breakdown Spectroscopy under Polar Conditions

    Science.gov (United States)

    Clausen, J. L.; Hark, R.; Bol'shakov, A.; Plumer, J.

    2015-12-01

    Over the past decade our research team has evaluated the use of commercial-off-the-shelf laser-induced breakdown spectroscopy (LIBS) for chemical analysis of snow and ice samples under polar conditions. One avenue of research explored LIBS suitability as a detector of paleo-climate proxy indicators (Ca, K, Mg, and Na) in ice as it relates to atmospheric circulation. LIBS results revealed detection of peaks for C and N, consistent with the presence of organic material, as well as major ions (Ca, K, Mg, and Na) and trace metals (Al, Cu, Fe, Mn, Ti). The detection of Ca, K, Mg, and Na confirmed that LIBS has sufficient sensitivity to be used as a tool for characterization of paleo-climate proxy indicators in ice-core samples. Techniques were developed for direct analysis of ice as well as indirect measurements of ice via melting and filtering. Pitfalls and issues of direct ice analysis using several cooling techniques to maintain ice integrity will be discussed. In addition, a new technique, laser ablation molecular isotopic spectroscopy (LAMIS) was applied to detection of hydrogen and oxygen isotopes in ice as isotopic analysis of ice is the main tool in paleoclimatology and glaciology studies. Our results demonstrated that spectra of hydroxyl isotopologues 16OH, 18OH, and 16OD can be recorded with a compact spectrograph to determine hydrogen and oxygen isotopes simultaneously. Quantitative isotopic calibration for ice analysis can be accomplished using multivariate chemometric regression as previously realized for water vapor. Analysis with LIBS and LAMIS required no special sample preparation and was about ten times faster than analysis using ICP-MS. Combination of the two techniques in one portable instrument for in-field analysis appears possible and would eliminate the logistical and cost issues associated with ice core management.

  13. Novel Applications of Laser-Induced Breakdown Spectroscopy.

    Science.gov (United States)

    Bauer, Amy J Ray; Buckley, Steven G

    2017-04-01

    The goal of this review article is to provide a description of recent and novel laser-induced breakdown spectroscopy (LIBS) applications and developments, especially those discussed during the NASLIBS Conference, held during SciX in Providence, RI, in September 2015. This topic was selected in view of the numerous recent overall review papers that have successfully given a broad view of the current understanding of laser-material interactions and plasma development and have also discussed the wide landscape of analytical applications of LIBS. This paper is divided into sections that focus on a few of the many applications under development in the LIBS community. We provide a summary of updates to calibration-free LIBS (CF-LIBS) and associated developments using plasma characteristics to improve quantification in LIBS output, both in a dedicated section and as applications are discussed. We have also described the most recent publications studying the sources, generation, and use of molecular features in LIBS, including those naturally present in the spectra of organic materials, and those induced with the addition of salts to enable the measurement of halogens, not typically present in LIBS signals. In terms of development of applications of LIBS, we focused on the use of LIBS for indirect measurements such as pH and degree of humification in soil and heating value in coal. We also reviewed the extant literature on LIBS analysis of agricultural materials, coal, minerals, and metals. Finally, we discuss the nascent developments of spatially heterodyne spectroscopy, a method that seeks to circumnavigate a serious drawback of most spectrometers - very small optical throughput - through the use of interferometers.

  14. 3D Imaging of Nanoparticle Distribution in Biological Tissue by Laser-Induced Breakdown Spectroscopy

    National Research Council Canada - National Science Library

    Gimenez, Y; Busser, B; Trichard, F; Kulesza, A; Laurent, J M; Zaun, V; Lux, F; Benoit, J M; Panczer, G; Dugourd, P; Tillement, O; Pelascini, F; Sancey, L; Motto-Ros, V

    2016-01-01

    .... The technology used is known as laser-induced breakdown spectroscopy (LIBS) and possesses several advantages such as speed of operation, ease of use and full compatibility with optical microscopy...

  15. Independent component analysis classification of laser induced breakdown spectroscopy spectra

    Energy Technology Data Exchange (ETDEWEB)

    Forni, Olivier, E-mail: olivier.forni@irap.omp.eu [Université de Toulouse, UPS-OMP, Institut de Recherche en Astrophysiqe et Planétologie, Toulouse (France); CNRS, IRAP, 9, av. Colonel Roche, BP 44346, F-31028 Cedex 4, Toulouse (France); Maurice, Sylvestre, E-mail: sylvestre.maurice@irap.omp.eu [Université de Toulouse, UPS-OMP, Institut de Recherche en Astrophysiqe et Planétologie, Toulouse (France); CNRS, IRAP, 9, av. Colonel Roche, BP 44346, F-31028 Cedex 4, Toulouse (France); Gasnault, Olivier, E-mail: olivier.gasnault@irap.omp.eu [Université de Toulouse, UPS-OMP, Institut de Recherche en Astrophysiqe et Planétologie, Toulouse (France); CNRS, IRAP, 9, av. Colonel Roche, BP 44346, F-31028 Cedex 4, Toulouse (France); Wiens, Roger C., E-mail: rwiens@lanl.gov [Space Remote Sensing, Los Alamos National Laboratory, Los Alamos, NM 87544 (United States); Cousin, Agnès, E-mail: acousin@lanl.gov [Université de Toulouse, UPS-OMP, Institut de Recherche en Astrophysiqe et Planétologie, Toulouse (France); CNRS, IRAP, 9, av. Colonel Roche, BP 44346, F-31028 Cedex 4, Toulouse (France); Chemical Division, Los Alamos National Laboratory, Los Alamos, NM 87544 (United States); Clegg, Samuel M., E-mail: sclegg@lanl.gov [Chemical Division, Los Alamos National Laboratory, Los Alamos, NM 87544 (United States); Sirven, Jean-Baptiste, E-mail: jean-baptiste.sirven@cea.f [CEA Saclay, DEN/DPC/SCP, 91191 Cedex, Gif sur Yvette (France); Lasue, Jérémie, E-mail: jeremie.lasue@irap.omp.eu [Université de Toulouse, UPS-OMP, Institut de Recherche en Astrophysiqe et Planétologie, Toulouse (France); CNRS, IRAP, 9, av. Colonel Roche, BP 44346, F-31028 Cedex 4, Toulouse (France)

    2013-08-01

    The ChemCam instrument on board Mars Science Laboratory (MSL) rover uses the laser-induced breakdown spectroscopy (LIBS) technique to remotely analyze Martian rocks. It retrieves spectra up to a distance of seven meters to quantify and to quantitatively analyze the sampled rocks. Like any field application, on-site measurements by LIBS are altered by diverse matrix effects which induce signal variations that are specific to the nature of the sample. Qualitative aspects remain to be studied, particularly LIBS sample identification to determine which samples are of interest for further analysis by ChemCam and other rover instruments. This can be performed with the help of different chemometric methods that model the spectra variance in order to identify a the rock from its spectrum. In this paper we test independent components analysis (ICA) rock classification by remote LIBS. We show that using measures of distance in ICA space, namely the Manhattan and the Mahalanobis distance, we can efficiently classify spectra of an unknown rock. The Mahalanobis distance gives overall better performances and is easier to manage than the Manhattan distance for which the determination of the cut-off distance is not easy. However these two techniques are complementary and their analytical performances will improve with time during MSL operations as the quantity of available Martian spectra will grow. The analysis accuracy and performances will benefit from a combination of the two approaches. - Highlights: • We use a novel independent component analysis method to classify LIBS spectra. • We demonstrate the usefulness of ICA. • We report the performances of the ICA classification. • We compare it to other classical classification schemes.

  16. Multivariate Analysis of Laser-Induced Breakdown Spectroscopy for Discrimination between Explosives and Plastics

    Institute of Scientific and Technical Information of China (English)

    WANG Qian-Qian; LIU Kai; ZHAO Hua

    2012-01-01

    A method to distinguish explosives from plastics using laser-induced breakdown spectroscopy is discussed. A model for classification with cross-validation theory is built based on the partial least-square discriminant analysis method. Seven types of plastics and one explosive are used as samples to test the model. The experimental results demonstrate that laser-induced breakdown spectroscopy has the capacity to discriminate explosives from plastics combined with chemometrics methods. The results could be useful for prospective research of laser-induced breakdown spectroscopy on the differentiation of explosives and other materials.%A method to distinguish explosives from plastics using laser-induced breakdown spectroscopy is discussed.A model for classification with cross-validation theory is built based on the partial least-square discriminant analysis method.Seven types of plastics and one explosive are used as samples to test the model.The experimental results demonstrate that laser-induced breakdown spectroscopy has the capacity to discriminate explosives from plastics combined with chemometrics methods.The results could be useful for prospective research of laser-induced breakdown spectroscopy on the differentiation of explosives and other materials.

  17. Statistical Classification of Soft Solder Alloys by Laser-Induced Breakdown Spectroscopy: Review of Methods

    Science.gov (United States)

    Zdunek, R.; Nowak, M.; Pliński, E.

    2016-02-01

    This paper reviews machine-learning methods that are nowadays the most frequently used for the supervised classification of spectral signals in laser-induced breakdown spectroscopy (LIBS). We analyze and compare various statistical classification methods, such as linear discriminant analysis (LDA), quadratic discriminant analysis (QDA), partial least-squares discriminant analysis (PLS-DA), soft independent modeling of class analogy (SIMCA), support vector machine (SVM), naive Bayes method, probabilistic neural networks (PNN), and K-nearest neighbor (KNN) method. The theoretical considerations are supported with experiments conducted for real soft-solder-alloy spectra obtained using LIBS. We consider two decision problems: binary and multiclass classification. The former is used to distinguish overheated soft solders from their normal versions. The latter aims to assign a testing sample to a given group of materials. The measurements are obtained for several laser-energy values, projection masks, and numbers of laser shots. Using cross-validation, we evaluate the above classification methods in terms of their usefulness in solving both classification problems.

  18. Selective Surface Sintering Using a Laser-Induced Breakdown Spectroscopy System

    Directory of Open Access Journals (Sweden)

    H. Jull

    2017-01-01

    Full Text Available Titanium metal injection molding allows creation of complex metal parts that are lightweight and biocompatible with reduced cost in comparison with machining titanium. Laser-induced breakdown spectroscopy (LIBS can be used to create plasma on the surface of a sample to analyze its elemental composition. Repetitive ablation on the same site has been shown to create differences from the original sample. This study investigates the potential of LIBS for selective surface sintering of injection-molded titanium metal. The temperature created throughout the LIBS process on the surface of the injection-molded titanium is high enough to fuse together the titanium particles. Using the ratio of the Ti II 282.81 nm and the C I 247.86 nm lines, the effectiveness of repetitive plasma formation to produce sintering can be monitored during the process. Energy-dispersive X-ray spectroscopy on the ablation craters confirms sintering through the reduction in carbon from 20.29 Wt.% to 2.13 Wt.%. Scanning electron microscope images confirm sintering. A conventional LIBS system, with a fixed distance, investigated laser parameters on injection-molded and injection-sintered titanium. To prove the feasibility of using this technique on a production line, a second LIBS system, with an autofocus and 3-axis translation stage, successfully sintered a sample with a nonplanar surface.

  19. A Simple LIBS (Laser-Induced Breakdown Spectroscopy) Laboratory Experiment to Introduce Undergraduates to Calibration Functions and Atomic Spectroscopy

    Science.gov (United States)

    Chinni, Rosemarie C.

    2012-01-01

    This laboratory experiment introduces students to a different type of atomic spectroscopy: laser-induced breakdown spectroscopy (LIBS). LIBS uses a laser-generated spark to excite the sample; once excited, the elemental emission is spectrally resolved and detected. The students use LIBS to analyze a series of standard synthetic silicate samples…

  20. A Simple LIBS (Laser-Induced Breakdown Spectroscopy) Laboratory Experiment to Introduce Undergraduates to Calibration Functions and Atomic Spectroscopy

    Science.gov (United States)

    Chinni, Rosemarie C.

    2012-01-01

    This laboratory experiment introduces students to a different type of atomic spectroscopy: laser-induced breakdown spectroscopy (LIBS). LIBS uses a laser-generated spark to excite the sample; once excited, the elemental emission is spectrally resolved and detected. The students use LIBS to analyze a series of standard synthetic silicate samples…

  1. Nanoparticle detection in aqueous solutions using Raman and Laser Induced Breakdown Spectroscopy

    NARCIS (Netherlands)

    Sovago, M.; Buis, E.-J.; Sandtke, M.

    2013-01-01

    We show the chemical identification and quantification of the concentration and size of nanoparticle (NP) dispersions in aqueous solutions by using a combination of Raman Spectroscopy and Laser Induced Breakdown Spectroscopy (LIBS). The two spectroscopic techniques are applied to demonstrate the NP

  2. Nanoparticle detection in aqueous solutions using Raman and Laser Induced Breakdown Spectroscopy

    NARCIS (Netherlands)

    Sovago, M.; Buis, E.-J.; Sandtke, M.

    2013-01-01

    We show the chemical identification and quantification of the concentration and size of nanoparticle (NP) dispersions in aqueous solutions by using a combination of Raman Spectroscopy and Laser Induced Breakdown Spectroscopy (LIBS). The two spectroscopic techniques are applied to demonstrate the NP

  3. Note: A novel technique for analysis of aqueous solutions by laser-induced breakdown spectroscopy.

    Science.gov (United States)

    Rusak, D A; Anthony, T P; Bell, Z T

    2015-11-01

    Surface-enhanced Raman spectroscopy (SERS) substrates typically consist of gold or silver nanoparticles deposited on a non-conductive substrate. In Raman spectroscopy, the nanoparticles produce an enhancement of the electromagnetic field which, in turn, leads to greater electronic excitation of molecules in the local environment. Here, we show that these same surfaces can be used to enhance the signal-to-noise ratio obtained in laser-induced breakdown spectroscopy of aqueous solutions. In this case, the SERS substrates not only lower breakdown thresholds and lead to more efficient plasma initiation but also provide an appropriately wettable surface for the deposition of the liquid. We refer to this technique as surface-enhanced laser-induced breakdown spectroscopy.

  4. Investigation of Normalization Methods using Plasma Parameters for Laser Induced Breakdown Spectroscopy (LIBS) under simulated Martian Conditions

    OpenAIRE

    Vogt, David; Schröder, Susanne; Hübers, H.-W.

    2017-01-01

    Laser Induced Breakdown Spectroscopy data need to be normalized, especially in the field of planetary exploration We investigated plasma parameters as temperature and electron density for this purpose.

  5. Analysis of plutonium oxide surrogate residue using laser-induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Zheng Hongbo [Department of Applied Physics, College of Science, Nanjing University of Technology, Nanjing (China); Yueh, F.Y.; Miller, Tracy [Institute for Clean Energy Technology (ICET), Mississippi State University, Starkville, MS 39759-7704 (United States); Singh, Jagdish P. [Institute for Clean Energy Technology (ICET), Mississippi State University, Starkville, MS 39759-7704 (United States)], E-mail: singh@icet.msstate.edu; Zeigler, Kristine E.; Marra, James C. [Savannah River National Laboratory (SRNL), Aiken, SC 29808 (United States)

    2008-09-15

    Laser-induced breakdown spectroscopy was used to determine the elemental composition of a CeO{sub 2} composite powder for process control verification during lanthanide borosilicate glass fabrication. Cerium oxide is used as a surrogate for plutonium oxide, which along with other canister contents will be combined with frit to make glass. Laser-induced breakdown spectroscopy data for the composition of the CeO{sub 2} batch containing concentrations of Ce, Cr, Si, Fe, Ta, Ni, Zn, Al Mg, Gd, and W were quantitatively determined from laser-induced breakdown spectroscopy spectra of both pellet and powder samples. The results of both forms were compared and it was determined that the pellet data gave slightly better precision than the powder sample.

  6. Laser-induced breakdown spectroscopy detection of heavy metal in water based on graphite conch method

    Science.gov (United States)

    Wang, Chunlong; Liu, Jianguo; Zhao, Nanjing; Shi, Huan; Liu, Lituo; Ma, Mingjun; Zhang, Wei; Chen, Dong; Liu, Jing; Zhang, Yujun; Liu, Wenqing

    2012-10-01

    The laser-induced breakdown spectroscopy emission characteristics of trace heavy metal lead in water is studied based on graphite conch method, with a 1064nm wavelength Nd: YAG laser as excitation source, the echelle spectrometer and ICCD detector are used for spectral separation and high sensitive detection with high resolution and wide spectral range. The delay time 900ns and gate time 1600ns are determined in the experiment. The calibration curve of Pb is plotted based on the different concentration measurement results, and a limit of detection of 0.0138mg / L is obtained for Pb in water. Graphite conch method effectively overcomes the current problems on laser-induced breakdown spectroscopy detection of heavy metal in water. The detection limits and stability are improved. The reference data is provided for further study on the fast measurement of trace heavy metals in water by laser induced breakdown spectroscopy technique.

  7. Laser-Induced Breakdown Spectroscopy Coupled with Multivariate Chemometrics for Variety Discrimination of Soil

    Science.gov (United States)

    Yu, Ke-Qiang; Zhao, Yan-Ru; Liu, Fei; He, Yong

    2016-01-01

    The aim of this work was to analyze the variety of soil by laser-induced breakdown spectroscopy (LIBS) coupled with chemometrics methods. 6 certified reference materials (CRMs) of soil samples were selected and their LIBS spectra were captured. Characteristic emission lines of main elements were identified based on the LIBS curves and corresponding contents. From the identified emission lines, LIBS spectra in 7 lines with high signal-to-noise ratio (SNR) were chosen for further analysis. Principal component analysis (PCA) was carried out using the LIBS spectra at 7 selected lines and an obvious cluster of 6 soils was observed. Soft independent modeling of class analogy (SIMCA) and least-squares support vector machine (LS-SVM) were introduced to establish discriminant models for classifying the 6 types of soils, and they offered the correct discrimination rates of 90% and 100%, respectively. Receiver operating characteristic (ROC) curve was used to evaluate the performance of models and the results demonstrated that the LS-SVM model was promising. Lastly, 8 types of soils from different places were gathered to conduct the same experiments for verifying the selected 7 emission lines and LS-SVM model. The research revealed that LIBS technology coupled with chemometrics could conduct the variety discrimination of soil. PMID:27279284

  8. Laser-Induced Breakdown Spectroscopy Coupled with Multivariate Chemometrics for Variety Discrimination of Soil

    Science.gov (United States)

    Yu, Ke-Qiang; Zhao, Yan-Ru; Liu, Fei; He, Yong

    2016-06-01

    The aim of this work was to analyze the variety of soil by laser-induced breakdown spectroscopy (LIBS) coupled with chemometrics methods. 6 certified reference materials (CRMs) of soil samples were selected and their LIBS spectra were captured. Characteristic emission lines of main elements were identified based on the LIBS curves and corresponding contents. From the identified emission lines, LIBS spectra in 7 lines with high signal-to-noise ratio (SNR) were chosen for further analysis. Principal component analysis (PCA) was carried out using the LIBS spectra at 7 selected lines and an obvious cluster of 6 soils was observed. Soft independent modeling of class analogy (SIMCA) and least-squares support vector machine (LS-SVM) were introduced to establish discriminant models for classifying the 6 types of soils, and they offered the correct discrimination rates of 90% and 100%, respectively. Receiver operating characteristic (ROC) curve was used to evaluate the performance of models and the results demonstrated that the LS-SVM model was promising. Lastly, 8 types of soils from different places were gathered to conduct the same experiments for verifying the selected 7 emission lines and LS-SVM model. The research revealed that LIBS technology coupled with chemometrics could conduct the variety discrimination of soil.

  9. Fast detection of tobacco mosaic virus infected tobacco using laser-induced breakdown spectroscopy

    Science.gov (United States)

    Peng, Jiyu; Song, Kunlin; Zhu, Hongyan; Kong, Wenwen; Liu, Fei; Shen, Tingting; He, Yong

    2017-03-01

    Tobacco mosaic virus (TMV) is one of the most devastating viruses to crops, which can cause severe production loss and affect the quality of products. In this study, we have proposed a novel approach to discriminate TMV-infected tobacco based on laser-induced breakdown spectroscopy (LIBS). Two different kinds of tobacco samples (fresh leaves and dried leaf pellets) were collected for spectral acquisition, and partial least squared discrimination analysis (PLS-DA) was used to establish classification models based on full spectrum and observed emission lines. The influences of moisture content on spectral profile, signal stability and plasma parameters (temperature and electron density) were also analysed. The results revealed that moisture content in fresh tobacco leaves would worsen the stability of analysis, and have a detrimental effect on the classification results. Good classification results were achieved based on the data from both full spectrum and observed emission lines of dried leaves, approaching 97.2% and 88.9% in the prediction set, respectively. In addition, support vector machine (SVM) could improve the classification results and eliminate influences of moisture content. The preliminary results indicate that LIBS coupled with chemometrics could provide a fast, efficient and low-cost approach for TMV-infected disease detection in tobacco leaves.

  10. Micro spatial analysis of seashell surface using laser-induced breakdown spectroscopy and Raman spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Yuan; Li, Yuandong; Li, Ying [Optics and Optoelectronics Lab, Ocean University of China, Qingdao 266100 (China); Wang, Yangfan; Wang, Shi; Bao, Zhenmin [Life Science College, Ocean University of China, Qingdao 266003 (China); Zheng, Ronger, E-mail: rzheng@ouc.edu.cn [Optics and Optoelectronics Lab, Ocean University of China, Qingdao 266100 (China)

    2015-08-01

    The seashell has been studied as a proxy for the marine researches since it is the biomineralization product recording the growth development and the ocean ecosystem evolution. In this work a hybrid of Laser Induced Breakdown Spectroscopy (LIBS) and Raman spectroscopy was introduced to the composition analysis of seashell (scallop, bivalve, Zhikong). Without any sample treatment, the compositional distribution of the shell was obtained using LIBS for the element detection and Raman for the molecule recognition respectively. The elements Ca, K, Li, Mg, Mn and Sr were recognized by LIBS; the molecule carotene and carbonate were identified with Raman. It was found that the LIBS detection result was more related to the shell growth than the detection result of Raman. The obtained result suggested the shell growth might be developing in both horizontal and vertical directions. It was indicated that the LIBS–Raman combination could be an alternative way for the shell researches. - Highlights: • A LIBS–Raman hybrid system was developed. • A seashell has been analyzed for the elementary and molecular distribution with a system. • The shell growth development was studied on the surface and in the depth.

  11. Laser-induced breakdown spectroscopy for quantification of heavy metals in soils and sediments

    CSIR Research Space (South Africa)

    Ambushe, AA

    2010-09-01

    Full Text Available Laser-induced breakdown spectroscopy (LIBS) will be used to determine the contents of heavy metals in soils and sediments. LIBS results will be compared with the results obtained by inductively coupled plasma-optical emission spectrometry (ICP...

  12. Quantification of metals in preservatively-treated lumber using laser induced breakdown spectroscopy

    Science.gov (United States)

    Brad Gething; John Janowiak; Bob Falk

    2006-01-01

    The laser induced breakdown spectroscopy (LIBS) technique was evaluated for its capability of quantifying CCA in preservative-treated wood. The results of the study reveal that the LIBS technique can be used to predict the amount of preservative based on chromium peak analysis, but further refinement of the process is necessary before the technique is practiced. The...

  13. Use of laser induced breakdown spectroscopy for the analysis of poultry products

    Science.gov (United States)

    Laser Induced Breakdown Spectroscopy is evaluated as a potential method to characterize a wide range of poultry product quality and safety characteristics. In one part of this study, breast meat quality indices, including pH and water holding capacity, were treated as dependent variables for correla...

  14. North American Symposium on Laser Induced Breakdown Spectroscopy (NASLIBS): introduction to feature issue.

    Science.gov (United States)

    Singh, Jagdish P; Almirall, Jose; Sabsabi, Mohamad; Miziolek, Andrzej W

    2012-03-01

    This feature issue highlights the topics of the 2011 North American Symposium on Laser Induced Breakdown Spectroscopy (NASLIBS). These include LIBS application to Security and Forensic, Biomedical and Environmental, Liquid Analysis and Fundamentals of LIBS, Instrumentation/Commercialization, Fusion with LIBS, and New Frontiers. © 2012 Optical Society of America

  15. Online sensor system based on laser-induced breakdown spectroscopy in quality inspection of demolition concrete

    NARCIS (Netherlands)

    Xia, H.; Bakker, M.C.M.

    2012-01-01

    In the C2CA project, an online sensor system is required to measure and control the quality and homogeneity of demolition concrete continuously. Laser-induced breakdown spectroscopy is a candidate to fulfil the objective in several tasks. Investigated is the ability of LIBS as an online

  16. Quantifying lycopene synthesis and chlorophyll breakdown in tomato fruit using remittance VIS spectroscopy

    NARCIS (Netherlands)

    Schouten, R.E.; Farneti, B.; Tijskens, L.M.M.; Algarra Alarcon, A.; Woltering, E.J.

    2014-01-01

    The aim of this study was to increase the understanding of chlorophyll breakdown and lycopene synthesis at a quantitative level in Solanum lycopersicum fruit. To accomplish this, a kinetic model is proposed describing the transition from chloro- to chromoplast. Remittance VIS spectroscopy was used t

  17. Calculation and optimization of sample identification by laser induced breakdown spectroscopy via correlation analysis

    NARCIS (Netherlands)

    Lentjes, M.; Dickmann, K.; Meijer, J.

    2007-01-01

    Linear correlation analysis may be used as a technique for the identification of samples with a very similar chemical composition by laser induced breakdown spectroscopy. The spectrum of the “unknown” sample is correlated with a library of reference spectra. The probability of identification by

  18. Femtosecond laser induced breakdown spectroscopy of silver within surrogate high temperature gas reactor fuel coated particles

    CSIR Research Space (South Africa)

    Roberts, DE

    2010-11-01

    Full Text Available been studied with femtosecond Laser Induced Breakdown Spectroscopy (femto-LIBS). The SiC layer of the TRISO coated particle is the main barrier to metallic and gaseous fission products of which 110mAg is of particular interest for direct cycle high...

  19. Time-Resolved Spectroscopy Diagnostic of Laser-Induced Optical Breakdown

    OpenAIRE

    Parigger, Christian G.; Hornkohl, James O.; László Nemes

    2010-01-01

    Transient laser plasma is generated in laser-induced optical breakdown (LIOB). Here we report experiments conducted with 10.6-micron CO2 laser radiation, and with 1.064-micron fundamental, 0.532-micron frequency-doubled, 0.355-micron frequency-tripled Nd:YAG laser radiation. Characterization of laser induced plasma utilizes laser-induced breakdown spectroscopy (LIBS) techniques. Atomic hydrogen Balmer series emissions show electron number density of 1017 cm−3 measured approximately 10 μs and ...

  20. Parameters Optimization of Laser-Induced Breakdown Spectroscopy Experimental Setup for the Case with Beam Expander

    Science.gov (United States)

    Wang, Xin; Zhang, Lei; Fan, Juanjuan; Li, Yufang; Gong, Yao; Dong, Lei; Ma, Weiguang; Yin, Wangbao; Jia, Suotang

    2015-11-01

    Improvement of measurement precision and repeatability is one of the issues currently faced by the laser-induced breakdown spectroscopy (LIBS) technique, which is expected to be capable of precise and accurate quantitative analysis. It was found that there was great potential to improve the signal quality and repeatability by reducing the laser beam divergence angle using a suitable beam expander (BE). In the present work, the influences of several experimental parameters for the case with BE are studied in order to optimize the analytical performances: the signal to noise ratio (SNR) and the relative standard deviation (RSD). We demonstrate that by selecting the optimal experimental parameters, the BE-included LIBS setup can give higher SNR and lower RSD values of the line intensity normalized by the whole spectrum area. For validation purposes, support vector machine (SVM) regression combined with principal component analysis (PCA) was used to establish a calibration model to realize the quantitative analysis of the ash content. Good agreement has been found between the laboratory measurement results from the LIBS method and those from the traditional method. The measurement accuracy presented here for ash content analysis is estimated to be 0.31%, while the average relative error is 2.36%. supported by the 973 Program of China (No. 2012CB921603), National Natural Science Foundation of China (Nos. 61475093, 61127017, 61178009, 61108030, 61378047, 61275213, 61475093, and 61205216), the National Key Technology R&D Program of China (No. 2013BAC14B01), the Shanxi Natural Science Foundation (Nos. 2013021004-1 and 2012021022-1), the Shanxi Scholarship Council of China (Nos. 2013-011 and 2013-01), and the Program for the Outstanding Innovative Teams of Higher Learning Institutions of Shanxi, China

  1. Spatial confinement in laser-induced breakdown spectroscopy

    Science.gov (United States)

    Li, Xingwen; Yang, Zefeng; Wu, Jian; Wei, Wenfu; Qiu, Yan; Jia, Shenli; Qiu, Aici

    2017-01-01

    The spatial confinement of plasma produced by a nanosecond laser is investigated using time resolved spectroscopy, fast imaging, interferometry, and numerical computation. The dynamics of the plasma, depending on shock waves, laser power, and wall distances, are studied. Experimental results confirm that the plasma is constricted by the reflected shock associated with a temperature and density gradient. The peak laser power determines the initial plasma parameters which affect the spectral intensities and the velocity of the reflective shock waves. The wall distance determines the reflection time of the shocks, which in turn influences the time delay of the collision between the two reflective shocks. The numerical results reveal a fast propagation process surrounding the reflective shocks, which indicates that the velocity of the reflective shock wave is influenced by the density of the plasma. The maximum enhancement factor ~5.2 is realized at a delay time of 11.7 µs under a pulse laser energy of 180 mJ and a wall distance of 9 mm.

  2. Identification of inks and structural characterization of contemporary artistic prints by laser-induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Oujja, M. [Instituto de Quimica Fisica Rocasolano, CSIC, Serrano 119, 28006 Madrid (Spain); Vila, A. [Departament de Pintura, Conservacio-Restauracio, Facultat de Belles Arts, Universitat de Barcelona, Pau Gargallo 4, 08028 Barcelona (Spain); Rebollar, E. [Instituto de Quimica Fisica Rocasolano, CSIC, Serrano 119, 28006 Madrid (Spain); Garcia, J.F. [Departament de Pintura, Conservacio-Restauracio, Facultat de Belles Arts, Universitat de Barcelona, Pau Gargallo 4, 08028 Barcelona (Spain); Castillejo, M. [Instituto de Quimica Fisica Rocasolano, CSIC, Serrano 119, 28006 Madrid (Spain)]. E-mail: marta.castillejo@iqfr.csic.es

    2005-08-31

    Identification of the inks used in artistic prints and the order in which different ink layers have been applied on a paper substrate are important factors to complement the classical stylistic aspects for the authentication of this type of objects. Laser-induced breakdown spectroscopy (LIBS) is investigated to determine the chemical composition and structural distribution of the constituent materials of model prints made by applying one or two layers of several blue and black inks on an Arches paper substrate. By using suitable laser excitation conditions, identification of the inks was possible by virtue of emissions from key elements present in their composition. Analysis of successive spectra on the same spot allowed the identification of the order in which the inks were applied on the paper. The results show the potential of laser-induced breakdown spectroscopy for the chemical and structural characterization of artistic prints.

  3. Time resolved laser-induced breakdown spectroscopy for calcium concentration detection in water

    Institute of Scientific and Technical Information of China (English)

    WU Jiang-lai; LU Yuan; Li Ying; CHENG Kai; GUO Jin-jia; ZHENG Rong-er

    2011-01-01

    @@ The laser induced breakdown spectroscopy (LIBS) is an element analysis technique with the advantages of real time detection, simultaneous multi-element identification, and in-situ and stand-off capacities.To evaluate its potential of ocean applications, in this paper, the time resolved laser-induced breakdown spectroscopy for calcium concentration detection in water is investigated.With the optimum experimental parameters, the plasma emission lifetime is determined to be about 500 ns with 532 nm laser excitation, and 1000 ns with 1064 nm laser excitation.The lowest detection concentration of 50ppm is achieved for calcium detection in CaC12 water solution using the 532 nm LIBS.Even better detection sensitivity is achieved using the 1064 nm LIBS, and the resulted lowest detection concentration of calcium is 25 ppm.The results suggest that it is feasible to develop LIBS as an on-line sensor for metal element monitoring in the sea.

  4. Determining spatial sodium distribution in fresh and aged bread using laser-induced breakdown spectroscopy

    NARCIS (Netherlands)

    Scholtes-Timmerman, M.; Heddes, C.; Noort, M.W.J.; Veen, S. van

    2013-01-01

    A fast and easy-to-use method using laser-induced breakdown spectroscopy (LIBS) was set up to determine Na (sodium) distribution in baked bread. Standard bread was made using a standard recipe and the amount of salt added was 0, 0.5, 1, 2, 4, 10, 15 and 20g corresponding to 0, 0.25, 0.5, 1.0, 2.0, 5

  5. Determining spatial sodium distribution in fresh and aged bread using laser-induced breakdown spectroscopy

    NARCIS (Netherlands)

    Scholtes-Timmerman, M.; Heddes, C.; Noort, M.W.J.; Veen, S. van

    2013-01-01

    A fast and easy-to-use method using laser-induced breakdown spectroscopy (LIBS) was set up to determine Na (sodium) distribution in baked bread. Standard bread was made using a standard recipe and the amount of salt added was 0, 0.5, 1, 2, 4, 10, 15 and 20g corresponding to 0, 0.25, 0.5, 1.0, 2.0,

  6. Quantitative analysis of pathological nails using laser-induced breakdown spectroscopy (LIBS) technique.

    Science.gov (United States)

    Hamzaoui, S; Khleifia, R; Jaïdane, N; Ben Lakhdar, Z

    2011-01-01

    Laser-induced breakdown spectroscopy (LIBS) has been used as a potential method for simultaneous measurement of the elements Ca, Na, and K, for normal and pathological nails. We compared the measured LIBS spectra of these elements for normal and pathological nails. The B²∑+ --> X²∑+ violet band emission spectrum of CN was used for the estimation of the transient temperature of the plasma plume and consequently of the sample surface considering thermodynamic equilibrium.

  7. Improved algorithm for elemental analysis by laser-induced breakdown spectroscopy.

    Science.gov (United States)

    Kumar, Prashant; Subramanian, K P; Kumar, Ajai; Singh, R K

    2013-07-20

    We propose a calibration-free algorithm for retrieval of elemental concentrations using laser-induced breakdown spectroscopy. This is a simple and improved version of other ratio-based algorithms as it needs only one trial parameter to estimate all other concentrations. The present algorithm has been used to estimate the composition of a brass sample, and the results agree within 1% with electron probe microanalyzer measurements.

  8. Analysis Si/Al ratio in zeolites type FAU by laser induced breakdown spectroscopy (LIBS)

    Science.gov (United States)

    Contreras, W. A.; Cabanzo, R.; Mejía-Ospino, E.

    2011-01-01

    In this work, Laser Induced Breakdown Spectroscopy (LIBS) is used to determine the Si/Al ratio of Zeolite type Y. The catalytic activity of zeolite is strongly dependent of the Si/Al ratio. We have used Si lines in the spectral region between 245-265 nm to determine temperature of the plasma generated on pelletized sample of zeolite, and stoichiometry relation between Si and Al.

  9. Spectroscopy of laser-produced plasmas: Setting up of high-performance laser-induced breakdown spectroscopy system

    Indian Academy of Sciences (India)

    V K Unnikrishnan; Kamlesh Alti; Rajesh Nayak; Rodney Bernard; V B Kartha; C Santhosh; G P Gupta; B M Suri

    2010-12-01

    It is a well-known fact that laser-induced breakdown spectroscopy (LIBS) has emerged as one of the best analytical techniques for multi-elemental compositional analysis of samples. We report assembling and optimization of LIBS set up using high resolution and broad-range echelle spectrograph coupled to an intensified charge coupled device (ICCD) to detect and quantify trace elements in environmental and clinical samples. Effects of variations of experimental parameters on spectroscopy signals of copper and brass are reported. Preliminary results of some plasma diagnostic calculations using recorded time-resolved optical emission signals are also reported for brass samples.

  10. Comparing predictive ability of Laser-Induced Breakdown Spectroscopy to Near Infrared Spectroscopy for soil texture and organic carbon determination

    DEFF Research Database (Denmark)

    Knadel, Maria; Peng, Yi; Gislum, René;

    and texture was tested and compared with near infrared spectroscopy (NIRS) technique and traditional laboratory analysis. Calibration models were developed on 50 topsoil samples. For all properties except silt, higher predictive ability of LIBS than NIRS models was obtained. Successful calibrations indicate......Soil organic carbon (SOC) and texture have a practical value for agronomy and the environment. Thus, alternative techniques to supplement or substitute for the expensive conventional analysis of soil are developed. Here the feasibility of laser-induced breakdown spectroscopy (LIBS) to determine SOC...

  11. Analysis of Frozen Sulfate and Chloride Salt Solutions Using Laser-induced Breakdown Spectroscopy Under Martian Conditions

    Science.gov (United States)

    Schröder, S.; Pavlov, S. G.; Hübers, H.-W.; Rauschenbach, I.; Jessberger, E. K.

    2010-03-01

    We showed the feasibility of laser-induced breakdown spectroscopy to analyze different frozen salt solutions under martian conditions. We focused on chloride and sulphate salts which were found on Mars and could lower the freezing point of water.

  12. Scheduling jobs on a machine subject to stochastic breakdowns to minimize absolute early-tardy penalties

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    This article addresses the problem of scheduling n jobs with a common due date on a machine subject to stochastic breakdowns to minimize absolute early-tardy penalties.We investigate the problem under the conditions that the uptimes follow an exponential distribution,and the objective measure in detail is to minimize the expected sum of the absolute deviations of completion times from the common due date.We proceed to study in two versions (the downtime follows an exponential distribution or is a constant entailed for the repeat model job),one of which is the so-called preempt- resume version,the other of which is the preempt-repeat version.Three terms of work have been done.(i)Formulations and Preliminaries.A few of necessary definitions,relations and basic facts are established.In particular,the conclusion that the expectation of the absolute deviation of the completion time about a job with deterministic processing time t from a due date is a semi-V-shape function in t has been proved.(ii) Properties of Optimal Solutions.A few characteristics of optimal solutions are established.Most importantly,the conclusion that optimal solutions possess semi-V- shape property has been proved.(iii) Algorithm.Some computing problems on searching for optimal solutions are discussed.

  13. Scheduling jobs on a machine subject to stochastic breakdowns to minimize absolute early-tardy penalties

    Institute of Scientific and Technical Information of China (English)

    CHENG CongDian; TANG HengYong; ZHAO ChuanLi

    2008-01-01

    This article addresses the problem of scheduling n jobs with a common due date on a machine subject to stochastic breakdowns to minimize absolute early-tardy penalties. We investigate the problem under the conditions that the uptimes follow an exponential distribution, and the objective measure in detail is to minimize the expected sum of the absolute deviations of completion times from the common due date. We proceed to study in two versions (the downtime follows an exponential distribution or is a constant entailed for the repeat model job), one of which is the so-called preempt-resume version, the other of which is the preempt-repeat version. Three terms of work have been done. (ⅰ) Formulations and Preliminaries. A few of necessary definitions, relations and basic facts are established. In particular, the conclusion that the expectation of the absolute deviation of the completion time about a job with deterministic processing time t from a due date is a semi-V-shape function in t has been proved. (ⅱ) Properties of Optimal Solutions. A few characteristics of optimal solutions are established. Most importantly, the conclusion that optimal solutions possess semi-V-shape property has been proved. (ⅲ) Algorithm. Some computing problems on searching for optimal solutions are discussed.

  14. Variational study of the constituents of cholesterol stones by laser-induced breakdown spectroscopy.

    Science.gov (United States)

    Singh, Vivek K; Rai, Vinita; Rai, A K

    2009-01-01

    The major and minor constituents of cholesterol gallstones were investigated by Laser-induced breakdown spectroscopy. The elements detected in the center and in the shell part were calcium (Ca), carbon (C), copper (Cu), hydrogen (H), magnesium (Mg), nitrogen (N), sodium (Na), oxygen (O) and potassium (K), but Cu was absent from the surface of the cholesterol gallstones. Our experimental results revealed that calcium was a major constituent of cholesterol gallstones. Our results also showed that the concentration of Ca, Cu and Mg were large in the center in comparison with the shell. Laser-induced breakdown (LIB) spectra of both portions of the surface (colored part and discolored part) of the cholesterol gallstones were recorded. The concentrations of sodium and potassium were higher in the non-pigmented (colored) part than in the pigmented part (discolored/pigment), which showed that the deficiency of sodium and potassium was playing a key role in the formation of discoloration at the different locations on the outer surfaces of the cholesterol gallstones. Thus, laser-induced breakdown spectroscopy (LIBS) is a suitable technique for the analysis of cholesterol gallstones without any sample preparation.

  15. Quantitative Classification of Quartz by Laser Induced Breakdown Spectroscopy in Conjunction with Discriminant Function Analysis

    Directory of Open Access Journals (Sweden)

    A. Ali

    2016-01-01

    Full Text Available A responsive laser induced breakdown spectroscopic system was developed and improved for utilizing it as a sensor for the classification of quartz samples on the basis of trace elements present in the acquired samples. Laser induced breakdown spectroscopy (LIBS in conjunction with discriminant function analysis (DFA was applied for the classification of five different types of quartz samples. The quartz plasmas were produced at ambient pressure using Nd:YAG laser at fundamental harmonic mode (1064 nm. We optimized the detection system by finding the suitable delay time of the laser excitation. This is the first study, where the developed technique (LIBS+DFA was successfully employed to probe and confirm the elemental composition of quartz samples.

  16. [Research Progress on Laser-Induced Breakdown Spectroscopy Based on Resonance Excitation].

    Science.gov (United States)

    Wang, Xu-zhao; Hao, Zhong-qi; Guo, Lian-bo; Li, Xiang-you; Lu, Yong-feng; Zeng, Xiao-yan

    2015-05-01

    Laser-induced breakdown spectroscopy (LIBS), a new kind of atomic spectrum analysis technology, has attracted much atterition of the researchers due to its characteristics of real-time, simultaneous multi-element analysis, and no sample preparation. However, the poor analytical sensitivity has been an important factor that restricts the development of this technology. LIBS based on resonance excitation combines atomic fluorescence spectroscopy and laser-induced breakdown spectroscopy and selectively excites the target elements. In this way, the analytical sensitivity of LIBS can be improved substantially and its application for trace elements detection is greatly expanded. In this paper, the research development of LIBS based on resonance excitation is summarized. The generation of atomic, fluorescence spectrum in laser-induced plasma, the typical classification and the basic principle of LIBS based on resonance. excitation are introduced. The influence of ablation laser energy, resonant laser energy and wavelength, delay between the ablation laser and the resonant laser, and the gate width on spectral enhancement are analyzed in detail. The application status and deficiencies of LIBS based on resonance excitation in the fields of metallurgy, environmental monitoring and isotope detection are elaborated. Future prospects of LIBS based on resonance excitation are also described.

  17. Femtosecond Laser-Induced Breakdown Spectroscopy for Detection of Trace Elements in Sophora Leaves

    Institute of Scientific and Technical Information of China (English)

    Myriam Bossu; HAO Zuo-Qiang; Matthieu Baudelet; YU Jia; ZHANG Zhe; ZHANG Jie

    2007-01-01

    Sophora leaves from several areas in Beijing are analysed by femtoeecond laser-induced breakdown spectroscopy (femto-LIBS).AIthough the used spectral detection systemis not time-resolved,thespectral lines of trace mineral elements are detected and anallyed.It is proven that the femto-LIBS can be an effcient method to detect mineral trace elements contained in tree leaves which is a biomonitor for atmospheric pollution assessment or botanic studies.An interesting case of correlation between trace elements detected in tree leaves and the pollution of the concerned area is presented,for the first time to our knowledge.

  18. Laser ablation of powdered samples and analysis by means of laser-induced breakdown spectroscopy

    Science.gov (United States)

    Ctvrtnickova, T.; Cabalin, L.; Laserna, J.; Kanicky, V.; Nicolas, G.

    2009-03-01

    The presented work proves the capacities of laser-induced breakdown spectroscopy (LIBS) as a fast, universal, and versatile technique for analysis of complex materials as ceramics. This paper reports on the analysis of ceramic raw materials (brick clays and kaolin) submitted to laser ablation in the form of pressed pellets. Spectrographic study was provided by standard single-pulse LIBS technique and orthogonal reheating double-pulse LIBS. It was found that both methods are comparable in terms of analytical performance, if adequate experimental parameters and signal detection systems are used.

  19. Laser-induced breakdown spectroscopy for real time and online elemental analysis

    CERN Document Server

    Rai, V N; Yueh, Fang-Yu; Singh, J P

    2014-01-01

    Laser-induced breakdown spectroscopy (LIBS) is a laser based diagnostics used to study atomic emission from the expanding plasma plume formed during the laser-matter interaction. It provides valuable information about the composition of the target material. LIBS has proved its potential application in the analysis of impurities, pollutants and toxic elements in various types of matrices of different samples (solid, liquid and gases), even those present under difficult and harsh environmental conditions. This article reviews some recent developments in the field, and its wide application in various fields of research and analysis.

  20. Optical-fiber-based laser-induced breakdown spectroscopy for detection of early caries

    Science.gov (United States)

    Sasazawa, Shuhei; Kakino, Satoko; Matsuura, Yuji

    2015-06-01

    A laser-induced breakdown spectroscopy (LIBS) system targeting for the in vivo analysis of tooth enamel is described. The system is planned to enable real-time analysis of teeth during laser dental treatment by utilizing a hollow optical fiber that transmits both Q-switched Nd:YAG laser light for LIBS and infrared Er:YAG laser light for tooth ablation. The sensitivity of caries detection was substantially improved by expanding the spectral region under analysis to ultraviolet (UV) light and by focusing on emission peaks of Zn in the UV region. Subsequently, early caries were distinguished from healthy teeth with accuracy rates above 80% in vitro.

  1. Rapid Analysis of Energetic and Geo-Materials Using Laser Induced Breakdown Spectroscopy

    Science.gov (United States)

    2013-04-01

    Anal (2005) 5, 21. 20. Anzano, J. M., et al., Anal Chim Acta (2006) 575, 230. 21. Rusak, D. A., et al., TrAC Trend Anal Chem (1998) 17, 453. 22. Martin ...Spectrosc Reviews (2004) 39, 27. 25. Winefordner, J. D., et al., J Anal Atom Spectrom (2004) 19, 1061. 26. Cremers , D. A., and Radziemski, L. J., Handbook...29. Singh, J. P. and Thakur, S. N., Eds., Laser-Induced Breakdown Spectroscopy, Elsevier: Amsterdam, The Netherlands, 2007. 30. Cremers , D. A., and

  2. Detection of lead in paint samples synthesized locally using-laser-induced breakdown spectroscopy.

    Science.gov (United States)

    Gondal, Mohammed A; Nasr, Mohamed M; Ahmed, Mubarak M; Yamani, Zain H; Alsalhi, M S

    2011-01-01

    A laser-induced breakdown spectroscopy (LIBS) setup was developed to detect lead and other toxic contaminants such as chromium in paint emulsion samples manufactured in Saudi Arabia. The lead concentration detected in these samples was in the 327.2-755.3 ppm range, which is much higher than the safe permissible limit set by Saudi regulatory agencies. Similarly, chromium concentration (98.1-149.5 ppm) was found in high concentrations as well. The results obtained with our LIBS setup are comparable with the sample analysis utilizing a standard technique such as ICP, and our LIBS results are comparable to ICP with in an accuracy limit of 2-4 %.

  3. Use of laser-induced breakdown spectroscopy for the differentiation of pathogens and viruses on substrates.

    Science.gov (United States)

    Multari, Rosalie A; Cremers, David A; Bostian, Melissa L

    2012-03-01

    In this work, the use of laser-induced breakdown spectroscopy (LIBS) to differentiate live pathogens and killed viruses on substrates is investigated. Live pathogens B. anthracis Sterne strain and F. tularensis live vaccine strain were interrogated as lawn and colonies on agar; dilutions on agar; and dilutions on glass slides, and it was found possible to differentiate among all samples. UV killed hantavirusstrains were studied as dilutions on slides and it was also found possible to differentiate among strains. To the best of our knowledge, this is the first study in which LIBS has been used to differentiate virus samples. © 2012 Optical Society of America

  4. Optical-fiber-based laser-induced breakdown spectroscopy for detection of early caries.

    Science.gov (United States)

    Sasazawa, Shuhei; Kakino, Satoko; Matsuura, Yuji

    2015-06-01

    A laser-induced breakdown spectroscopy (LIBS) system targeting for the in vivo analysis of tooth enamel is described. The system is planned to enable real-time analysis of teeth during laser dental treatment by utilizing a hollow optical fiber that transmits both Q-switched Nd:YAG laser light for LIBS and infrared Er:YAG laser light for tooth ablation. The sensitivity of caries detection was substantially improved by expanding the spectral region under analysis to ultraviolet (UV) light and by focusing on emission peaks of Zn in the UV region. Subsequently, early caries were distinguished from healthy teeth with accuracy rates above 80% in vitro.

  5. Laser-induced breakdown spectroscopy determination of toxic metals in fresh fish.

    Science.gov (United States)

    Ponce, L V; Flores, T; Sosa-Saldaña, M; Alvira, F C; Bilmes, G M

    2016-01-10

    A method based on laser induced breakdown spectroscopy (LIBS) for monitoring lead and copper accumulation in edible fish, particularly "tilapia del Nilo" (Oreochromis niloticus) is presented. The capability of this analytical method is compared with results obtained by atomic absorption spectrometry. Detection limits by LIBS are 25 parts per million (ppm) for Pb and 100 ppm for Cu, values that are below the maximum permissible levels of some international standards. Application of LIBS detection allows the development of portable instruments for contamination control of edible fish.

  6. Non-gated laser-induced breakdown spectroscopy in bulk water by position-selective detection

    Energy Technology Data Exchange (ETDEWEB)

    Tian, Ye; Xue, Boyang; Song, Jiaojian; Lu, Yuan; Zheng, Ronger, E-mail: rzheng@ouc.edu.cn [Optics and Optoelectronics Laboratory, Ocean University of China, Qingdao 266100 (China)

    2015-09-14

    Temporal and spatial evolutions of the laser-induced plasma in bulk water are investigated using fast imaging and emission spectroscopic techniques. By tightly focusing a single-pulse nanosecond Nd: YAG laser beam into the bulk water, we generate a strongly expanded plasma with high reproducibility. Such a strong expanding plasma enables us to obtain well-resolved spectral lines by means of position-selective detection; hence, the time-gated detector becomes abdicable. The present results suggest not only a possible non-gated approach for underwater laser-induced breakdown spectroscopy but also give an insight into the plasma generation and expansion in bulk water.

  7. Double-pulse standoff laser-induced breakdown spectroscopy for versatile hazardous materials detection

    Energy Technology Data Exchange (ETDEWEB)

    Gottfried, Jennifer L. [U.S. Army Research Laboratory, AMSRD-ARL-WM-BD, Aberdeen Proving Ground, MD, 21005-5069 (United States)], E-mail: jennifer.gottfried@arl.army.mil; De Lucia, Frank C.; Munson, Chase A.; Miziolek, Andrzej W. [U.S. Army Research Laboratory, AMSRD-ARL-WM-BD, Aberdeen Proving Ground, MD, 21005-5069 (United States)

    2007-12-15

    We have developed a double-pulse standoff laser-induced breakdown spectroscopy (ST-LIBS) system capable of detecting a variety of hazardous materials at tens of meters. The use of a double-pulse laser improves the sensitivity and selectivity of ST-LIBS, especially for the detection of energetic materials. In addition to various metallic and plastic materials, the system has been used to detect bulk explosives RDX and Composition-B, explosive residues, biological species such as the anthrax surrogate Bacillus subtilis, and chemical warfare simulants at 20 m. We have also demonstrated the discrimination of explosive residues from various interferents on an aluminum substrate.

  8. Application of Handheld Laser-Induced Breakdown Spectroscopy (LIBS) to Geochemical Analysis.

    Science.gov (United States)

    Connors, Brendan; Somers, Andrew; Day, David

    2016-05-01

    While laser-induced breakdown spectroscopy (LIBS) has been in use for decades, only within the last two years has technology progressed to the point of enabling true handheld, self-contained instruments. Several instruments are now commercially available with a range of capabilities and features. In this paper, the SciAps Z-500 handheld LIBS instrument functionality and sub-systems are reviewed. Several assayed geochemical sample sets, including igneous rocks and soils, are investigated. Calibration data are presented for multiple elements of interest along with examples of elemental mapping in heterogeneous samples. Sample preparation and the data collection method from multiple locations and data analysis are discussed.

  9. Laser-induced breakdown spectroscopy at high temperatures in industrial boilers and furnaces.

    Science.gov (United States)

    Blevins, Linda G; Shaddix, Christopher R; Sickafoose, Shane M; Walsh, Peter M

    2003-10-20

    Laser-induced breakdown spectroscopy (LIBS) was applied (1) near the superheater of an electric power generation boiler burning biomass, coal, or both; (2) at the exit of a glass-melting furnace burning natural gas and oxygen; and (3) near the nose arches of two paper mill recovery boilers burning black liquor. Difficulties associated with the high temperatures and high particle loadings in these environments were surmounted by use of novel LIBS probes. Echelle and linear spectrometers coupled to intensified CCD cameras were used individually and sometimes simultaneously. Elements detected include Na, K, Ca, Mg, C, B, Si, Mn, Al, Fe, Rb, Cl, and Ti.

  10. Time-Resolved Spectroscopy Diagnostic of Laser-Induced Optical Breakdown

    Directory of Open Access Journals (Sweden)

    Christian G. Parigger

    2010-01-01

    Full Text Available Transient laser plasma is generated in laser-induced optical breakdown (LIOB. Here we report experiments conducted with 10.6-micron CO2 laser radiation, and with 1.064-micron fundamental, 0.532-micron frequency-doubled, 0.355-micron frequency-tripled Nd:YAG laser radiation. Characterization of laser induced plasma utilizes laser-induced breakdown spectroscopy (LIBS techniques. Atomic hydrogen Balmer series emissions show electron number density of 1017 cm−3 measured approximately 10 μs and 1 μs after optical breakdown for CO2 and Nd:YAG laser radiation, respectively. Recorded molecular recombination emission spectra of CN and C2 Swan bands indicate an equilibrium temperature in excess of 7000 Kelvin, inferred for these diatomic molecules. Reported are also graphite ablation experiments where we use unfocused laser radiation that is favorable for observation of neutral C3 emission due to reduced C3 cation formation. Our analysis is based on computation of diatomic molecular spectra that includes accurate determination of rotational line strengths, or Hönl-London factors.

  11. Compositional Analysis of Aerosols Using Calibration-Free Laser-Induced Breakdown Spectroscopy.

    Science.gov (United States)

    Boudhib, Mohamed; Hermann, Jörg; Dutouquet, Christophe

    2016-04-05

    We demonstrate that the elemental composition of aerosols can be measured using laser-induced breakdown spectroscopy (LIBS) without any preliminary calibration with standard samples. Therefore, a nanosecond Nd:YAG laser beam was focused into a flux of helium charged with alumina aerosols of a few micrometers diameter. The emission spectrum of the laser-generated breakdown plasma was recorded with an echelle spectrometer coupled to a gated detector. The spectral features including emission from both the helium carrier gas and the Al2O3 aerosols were analyzed on the base of a partial local thermodynamic equilibrium. Thus, Boltzmann equilibrium distributions of population number densities were assumed for all plasma species except of helium atoms and ions. By analyzing spectra recorded for different delays between the laser pulse and the detector gate, it is shown that accurate composition measurements are only possible for delays ≤1 μs, when the electron density is large enough to ensure collisional equilibrium for the aerosol vapor species. The results are consistent with previous studies of calibration-free LIBS measurements of solid alumina and glass and promote compositional analysis of aerosols via laser-induced breakdown in helium.

  12. Comparing predictive ability of laser-induced breakdown spectroscopy to visible near-infrared spectroscopy for soil property determination

    DEFF Research Database (Denmark)

    Knadel, Maria; Gislum, René; Hermansen, Cecilie

    2017-01-01

    Soil organic carbon (SOC) and particle size fractions have a practical value for agronomy and the environment. Thus, alternative techniques to replace the expensive conventional analyses of soil are needed. Visible near-infrared reflectance spectroscopy (viseNIRS) has already shown potential...... for becoming an alternative method for soil analysis since it is faster and cheaper than conventional methods. Laser-induced breakdown spectroscopy (LIBS) is another cost-effective technique with potential for rapid analysis of elements present in the soil. In this study, the feasibility of using LIBS...... to determine SOC, clay, silt and sand contents of Danish agricultural soils was tested and compared with the viseNIRS method. First, country-scale Partial Least Squares (PLS) regression models on soils collected across Denmark (N ¼ 78) were built and validated using independent field samples (N ¼ 54). Secondly...

  13. Elemental profiling of laser cladded multilayer coatings by laser induced breakdown spectroscopy and energy dispersive X-ray spectroscopy

    Science.gov (United States)

    Lednev, V. N.; Sdvizhenskii, P. A.; Filippov, M. N.; Grishin, M. Ya.; Filichkina, V. A.; Stavertiy, A. Ya.; Tretyakov, R. S.; Bunkin, A. F.; Pershin, S. M.

    2017-09-01

    Multilayer tungsten carbide wear resistant coatings were analyzed by laser induced breakdown spectroscopy (LIBS) and energy dispersive X-ray (EDX) spectroscopy. Coaxial laser cladding technique was utilized to produce tungsten carbide coating deposited on low alloy steel substrate with additional inconel 625 interlayer. EDX and LIBS techniques were used for elemental profiling of major components (Ni, W, C, Fe, etc.) in the coating. A good correlation between EDX and LIBS data was observed while LIBS provided additional information on light element distribution (carbon). A non-uniform distribution of tungsten carbide grains along coating depth was detected by both LIBS and EDX. In contrast, horizontal elemental profiling showed a uniform tungsten carbide particles distribution. Depth elemental profiling by layer-by-layer LIBS analysis was demonstrated to be an effective method for studying tungsten carbide grains distribution in wear resistant coating without any sample preparation.

  14. Detecting salt deposition on a wind turbine blade using laser induced breakdown spectroscopy technique

    Science.gov (United States)

    Sathiesh Kumar, V.; Vasa, Nilesh J.; Sarathi, R.

    2013-07-01

    The study of pollution performance on a wind turbine blade due to lightning is important, as it can cause major damage to wind turbine blades. In the present work, optical emission spectroscopy (OES) technique is used to understand the influence of pollutant deposited on a wind turbine blade in an off-shore environment. A methodical experimental study was carried out by adopting IEC 60507 standards, and it was observed that the lightning discharge propagates at the interface between the pollutant and the glass fiber reinforced plastic (Material used in manufacturing of wind turbine blades). In addition, as a diagnostic condition monitoring technique, laser-induced breakdown spectroscopy (LIBS) is proposed and demonstrated to rank the severity of pollutant on the wind turbine blades from a remote area. Optical emission spectra observed during surface discharge process induced by lightning impulse voltage is in agreement with the spectra observed during LIBS.

  15. Simultaneous laser induced breakdown spectroscopy and Pd-assisted methane decomposition at different pressures

    Energy Technology Data Exchange (ETDEWEB)

    Reyhani, A. [Phys. Dept., Faculty of Science, Imam Khomeini International University, Qazvin, 34149-16818 (Iran, Islamic Republic of); Mortazavi, S.Z. [Phys. Dept., Amirkabir University of Technology, P.O. Box 15875-4413, Tehran (Iran, Islamic Republic of); Parvin, P., E-mail: parvin@aut.ac.ir [Phys. Dept., Amirkabir University of Technology, P.O. Box 15875-4413, Tehran (Iran, Islamic Republic of); Mahmoudi, Z. [Phys. Dept., Amirkabir University of Technology, P.O. Box 15875-4413, Tehran (Iran, Islamic Republic of)

    2012-08-15

    Methane decomposition is investigated during Pd-assisted laser induced plasma in the controlled chamber at various pressures using Q-switched Nd:YAG laser. Real time LIBS monitoring is applied to reveal the involved mechanisms during methane decomposition by inspecting the plasma parameters at mano-metric pressures of 1 to 10 mbar. The dependence of electron density and plasma temperature with pressure is also studied. It is shown that the plasma recreates higher hydrocarbons during the decomposition of methane. In addition, Fourier transform infrared spectroscopy, gas chromatography, scanning electron microscopy and transmission electron microscopy are applied to support the findings. - Highlights: Black-Right-Pointing-Pointer Simultaneous laser induced breakdown spectroscopy Black-Right-Pointing-Pointer Pd-assisted methane decomposition Black-Right-Pointing-Pointer Nanosecond pulsed laser decomposition of methane Black-Right-Pointing-Pointer Generation of higher hydrocarbon Black-Right-Pointing-Pointer Dependence of electron density and temperature of induced plasma with pressure.

  16. Extracting coal ash content from laser-induced breakdown spectroscopy (LIBS) spectra by multivariate analysis.

    Science.gov (United States)

    Yao, Shunchun; Lu, Jidong; Dong, Meirong; Chen, Kai; Li, Junyan; Li, Jun

    2011-10-01

    Laser-induced breakdown spectroscopy (LIBS) combined with partial least squares (PLS) analysis has been applied for the quantitative analysis of the ash content of coal in this paper. The multivariate analysis method was employed to extract coal ash content information from LIBS spectra rather than from the concentrations of the main ash-forming elements. In order to construct a rigorous partial least squares regression model and reduce the calculation time, different spectral range data were used to construct partial least squares regression models, and then the performances of these models were compared in terms of the correlation coefficients of calibration and validation and the root mean square errors of calibration and cross-validation. Afterwards, the prediction accuracy, reproducibility, and the limit of detection of the partial least squares regression model were validated with independent laser-induced breakdown spectroscopy measurements of four unknown samples. The results show that a good agreement is observed between the ash content provided by thermo-gravimetric analyzer and the LIBS measurements coupled to the PLS regression model for the unknown samples. The feasibility of extracting coal ash content from LIBS spectra is approved. It is also confirmed that this technique has good potential for quantitative analysis of the ash content of coal.

  17. Characterization of hard coatings produced by laser cladding using laser-induced breakdown spectroscopy technique

    Energy Technology Data Exchange (ETDEWEB)

    Varela, J.A.; Amado, J.M.; Tobar, M.J.; Mateo, M.P.; Yañez, A.; Nicolas, G., E-mail: gines@udc.es

    2015-05-01

    Highlights: • Chemical mapping and profiling by laser-induced breakdown spectroscopy (LIBS) of coatings produced by laser cladding. • Production of laser clads using tungsten carbide (WC) and nickel based matrix (NiCrBSi) powders. • Calibration by LIBS of hardfacing alloys with different WC concentrations. - Abstract: Protective coatings with a high abrasive wear resistance can be obtained from powders by laser cladding technique, in order to extend the service life of some industrial components. In this work, laser clad layers of self-fluxing NiCrBSi alloy powder mixed with WC powder have been produced on stainless steel substrates of austenitic type (AISI 304) in a first step and then chemically characterized by laser-induced breakdown spectroscopy (LIBS) technique. With the suitable laser processing parameters (mainly output power, beam scan speed and flow rate) and powders mixture proportions between WC ceramics and NiCrBSi alloys, dense pore free layers have been obtained on single tracks and on large areas with overlapped tracks. The results achieved by LIBS technique and applied for the first time to the analysis of laser clads provided the chemical composition of the tungsten carbides in metal alloy matrix. Different measurement modes (multiple point analyses, depth profiles and chemical maps) have been employed, demonstrating the usefulness of LIBS technique for the characterization of laser clads based on hardfacing alloys. The behavior of hardness can be explained by LIBS maps which evidenced the partial dilution of some WC spheres in the coating.

  18. Determination of the Zinc Concentration in Human Fingernails Using Laser-Induced Breakdown Spectroscopy.

    Science.gov (United States)

    Riberdy, Vlora A; Frederickson, Christopher J; Rehse, Steven J

    2017-04-01

    The absolute concentration of Zn in human fingernail clippings was determined ex vivo using 1064 nm laser-induced breakdown spectroscopy and confirmed by speciated isotope dilution mass spectrometry. A nail testing protocol that sampled across the nail (perpendicular to the direction of growth) was developed and validated by scanning electron microscopy energy-dispersive X-ray spectrometry. Using this protocol, a partial least squares (PLS) regression model predicted the Zn concentration in the fingernails of five people to within an average of 7 ppm. The variation in the Zn concentration with depth into the nail determined by laser-induced breakdown spectroscopy was studied and showed no systematic variation for up to 15 subsequent laser pulses in one location. The effects of nail hydration (dehydrated and over-hydrated) and nail surface roughness were investigated to explain an anomalously large scatter observed in the measurements. This scatter was attributed to the layered nature and fibrous structure of the fingernails, which resulted in non-uniform ablation as determined by scanning electron microscopy. This work demonstrates that a protocol consisting of low pulse energy (laser pulses incident on human fingernail clippings in an Ar environment can produce quantifiable Zn emission in the laser-induced plasma and that the measured Zn intensity can be used to accurately predict the Zn concentration in human fingernails.

  19. [Quantitative analysis of alloy steel based on laser induced breakdown spectroscopy with partial least squares method].

    Science.gov (United States)

    Cong, Zhi-Bo; Sun, Lan-Xiang; Xin, Yong; Li, Yang; Qi, Li-Feng; Yang, Zhi-Jia

    2014-02-01

    In the present paper both the partial least squares (PLS) method and the calibration curve (CC) method are used to quantitatively analyze the laser induced breakdown spectroscopy data obtained from the standard alloy steel samples. Both the major and trace elements were quantitatively analyzed. By comparing the results of two different calibration methods some useful results were obtained: for major elements, the PLS method is better than the CC method in quantitative analysis; more importantly, for the trace elements, the CC method can not give the quantitative results due to the extremely weak characteristic spectral lines, but the PLS method still has a good ability of quantitative analysis. And the regression coefficient of PLS method is compared with the original spectral data with background interference to explain the advantage of the PLS method in the LIBS quantitative analysis. Results proved that the PLS method used in laser induced breakdown spectroscopy is suitable for quantitative analysis of trace elements such as C in the metallurgical industry.

  20. Geographical analysis of 'conflict minerals' utilizing laser-induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Hark, Richard R., E-mail: hark@juniata.edu [Department of Chemistry, Juniata College, Huntingdon, PA 16652 (United States); Remus, Jeremiah J. [Department of Electrical and Computer Engineering, Clarkson University, Potsdam, NY 13699 (United States); East, Lucille J. [Applied Spectra, Inc., Fremont, CA 94538 (United States); Harmon, Russell S. [Department of Marine, Earth and Atmospheric Sciences, North Carolina State University, Raleigh, NC 27695 (United States); Wise, Michael A. [Department of Mineral Sciences, Smithsonian Institution, Washington, DC 20013 (United States); Tansi, Benjamin M.; Shughrue, Katrina M. [Department of Chemistry, Juniata College, Huntingdon, PA 16652 (United States); Dunsin, Kehinde S. [Department of Electrical and Computer Engineering, Clarkson University, Potsdam, NY 13699 (United States); Liu, Chunyi [Applied Spectra, Inc., Fremont, CA 94538 (United States)

    2012-08-15

    Laser-induced breakdown spectroscopy (LIBS) offers a means of rapidly distinguishing different geographic sources for a mineral because the LIBS plasma emission spectrum provides information on the chemical composition (i.e. geochemical fingerprint) of a geomaterial. An application of this approach with potentially significant commercial and political importance is the spectral fingerprinting of 'conflict minerals' such as columbite-tantalite ('coltan'). Following a successful pilot study of a columbite-tantalite suite from North America, a more geographically diverse set of 57 samples from 37 locations around the world was analyzed using a commercially available LIBS system. The LIBS spectra were analyzed using advanced multivariate statistical signal processing techniques. Partial least squares discriminant analysis (PLSDA) resulted in a correct place-level geographic classification at success rates above 90%. The possible role of rare-earth elements (REEs) as a factor contributing to the high levels of sample discrimination was explored. These results provide additional evidence that LIBS has the potential to be utilized in the field as a real-time screening tool to discriminate between columbite-tantalite ores of different provenance. - Highlights: Black-Right-Pointing-Pointer Analysis of columbite-tantalite using laser-induced breakdown spectroscopy (LIBS) Black-Right-Pointing-Pointer Chemometric analysis (PLSDA) affords 90-100% correct sample classification. Black-Right-Pointing-Pointer Possible role of rare-earth elements in the high level of sample discrimination.

  1. Application of laser-induced breakdown spectroscopy to the analysis of algal biomass for industrial biotechnology

    Energy Technology Data Exchange (ETDEWEB)

    Porizka, P.; Prochazka, D. [X-ray micro CT and nano CT research group, CEITEC-Central European Institute of Technology, Brno University of Technology, Technicka 3058/10, 616 00 Brno (Czech Republic); Pilat, Z. [Institute of Scientific Instruments of the ASCR v.v.i., Academy of Sciences of the Czech Republic, Kralovopolska 147, Brno 61669 (Czech Republic); Krajcarova, L. [Department of Chemistry, Faculty of Sciences, Masaryk University, Kotlarska 2, Brno 611 37 (Czech Republic); Kaiser, J., E-mail: kaiser@fme.vutbr.cz [X-ray micro CT and nano CT research group, CEITEC-Central European Institute of Technology, Brno University of Technology, Technicka 3058/10, 616 00 Brno (Czech Republic); Malina, R.; Novotny, J. [X-ray micro CT and nano CT research group, CEITEC-Central European Institute of Technology, Brno University of Technology, Technicka 3058/10, 616 00 Brno (Czech Republic); Zemanek, P.; Jezek, J.; Sery, M.; Bernatova, S.; Krzyzanek, V.; Dobranska, K. [Institute of Scientific Instruments of the ASCR v.v.i., Academy of Sciences of the Czech Republic, Kralovopolska 147, Brno 61669 (Czech Republic); Novotny, K. [Department of Chemistry, Faculty of Sciences, Masaryk University, Kotlarska 2, Brno 611 37 (Czech Republic); Trtilek, M. [Photon Systems Instruments, Drasov 470, 664 24 Drasov (Czech Republic); Samek, O. [Institute of Scientific Instruments of the ASCR v.v.i., Academy of Sciences of the Czech Republic, Kralovopolska 147, Brno 61669 (Czech Republic)

    2012-08-15

    We report on the application of laser-induced breakdown spectroscopy (LIBS) to the determination of elements distinctive in terms of their biological significance (such as potassium, magnesium, calcium, and sodium) and to the monitoring of accumulation of potentially toxic heavy metal ions in living microorganisms (algae), in order to trace e.g. the influence of environmental exposure and other cultivation and biological factors having an impact on them. Algae cells were suspended in liquid media or presented in a form of adherent cell mass on a surface (biofilm) and, consequently, characterized using their spectra. In our feasibility study we used three different experimental arrangements employing double-pulse LIBS technique in order to improve on analytical selectivity and sensitivity for potential industrial biotechnology applications, e.g. for monitoring of mass production of commercial biofuels, utilization in the food industry and control of the removal of heavy metal ions from industrial waste waters. - Highlights: Black-Right-Pointing-Pointer We realized laser-induced breakdown spectroscopy (LIBS) analysis of algal biomass. Black-Right-Pointing-Pointer We used water jet setup, bulk liquid arrangement and algal biofilms. Black-Right-Pointing-Pointer LIBS analysis of macro- and micro-element concentrations in algae was shown. Black-Right-Pointing-Pointer LIBS can be of assistance in research of sustainable biofuel generation. Black-Right-Pointing-Pointer LIBS can be used in research of algal food applications and bioremediation.

  2. Prospects for laser-induced breakdown spectroscopy for biomedical applications: a review.

    Science.gov (United States)

    Singh, Vivek Kumar; Rai, Awadhesh Kumar

    2011-09-01

    We review the different spectroscopic techniques including the most recent laser-induced breakdown spectroscopy (LIBS) for the characterization of materials in any phase (solid, liquid or gas) including biological materials. A brief history of the laser and its application in bioscience is presented. The development of LIBS, its working principle and its instrumentation (different parts of the experimental set up) are briefly summarized. The generation of laser-induced plasma and detection of light emitted from this plasma are also discussed. The merit and demerits of LIBS are discussed in comparison with other conventional analytical techniques. The work done using the laser in the biomedical field is also summarized. The analysis of different tissues, mineral analysis in different organs of the human body, characterization of different types of stone formed in the human body, analysis of biological aerosols using the LIBS technique are also summarized. The unique abilities of LIBS including detection of molecular species and calibration-free LIBS are compared with those of other conventional techniques including atomic absorption spectroscopy, inductively coupled plasma atomic emission spectroscopy and mass spectroscopy, and X-ray fluorescence.

  3. Emission enhancement of laser-induced breakdown spectroscopy by localized surface plasmon resonance for analyzing plant nutrients.

    Science.gov (United States)

    Ohta, Takayuki; Ito, Masafumi; Kotani, Takashi; Hattori, Takeaki

    2009-05-01

    We demonstrate the monitoring of plant nutrients in leaves of Citrus unshiu and Rhododendron obtusum using low-energy (laser-induced breakdown spectroscopy. The raw plant leaf was successfully ablated without desiccation before laser irradiation, by applying metallic colloidal particles to the leaf surface. The emission intensity with the metallic particles was larger than that without the particles. This result indicates an improvement of the sensitivity and the detection limit of laser-induced breakdown spectroscopy. The emission enhancement was caused by localized surface plasmon resonance and was dependent on the size and material of metallic particles.

  4. Eye-safe infrared laser-induced breakdown spectroscopy (LIBS) emissions from energetic materials

    Science.gov (United States)

    Brown, Ei E.; Hömmerich, Uwe; Yang, Clayton C.; Jin, Feng; Trivedi, Sudhir B.; Samuels, Alan C.

    2016-05-01

    Laser-induced breakdown spectroscopy is a powerful diagnostic tool for detection of trace elements by monitoring the atomic and ionic emission from laser-induced plasmas. Besides elemental emissions from conventional UV-Vis LIBS, molecular LIBS emission signatures of the target compounds were observed in the long-wave infrared (LWIR) region in recent studies. Most current LIBS studies employ the fundamental Nd:YAG laser output at 1.064 μm, which has extremely low eye-damage threshold. In this work, comparative LWIR-LIBS emissions studies using traditional 1.064 μm pumping and eye-safe laser wavelength at 1.574 μm were performed on several energetic materials for applications in chemical, biological, and explosive (CBE) sensing. A Q-switched Nd: YAG laser operating at 1.064 μm and the 1.574 μm output of a pulsed Nd:YAG pumped Optical Parametric Oscillator were employed as the excitation sources. The investigated energetic materials were studied for the appearance of LWIR-LIBS emissions (4-12 μm) that are directly indicative of oxygenated breakdown products as well as partially dissociated and recombination molecular species. The observed molecular IR LIBS emission bands showed strong correlation with FTIR absorption spectra of the studied materials for 1.064 μm and 1.574 μm pump wavelengths.

  5. Quantitative analysis of metformin in antidiabetic tablets by laser-induced breakdown spectroscopy

    Science.gov (United States)

    Contreras, U.; Ornelas-Soto, N.; Meneses-Nava, M. A.; Barbosa-García, O.; López-de-Alba, P. L.; López-Martínez, L.

    2011-09-01

    Nowadays the production of counterfeit and low quality drugs affects human health and generates losses to pharmaceutical industries and tax revenue losses to government. Currently there are several methods for pharmaceutical product analysis; nevertheless, most of them depend on complex and time consuming steps such as sample preparation. In contrast to conventional methods, Laser-induced breakdown spectroscopy (LIBS) is evaluated as a potential analytical technique for the rapid screening and quality control of anti-diabetic solid formulations. In this paper authors propose a simple method to analyze qualitatively and quantitatively Active Pharmaceutical Ingredients (APIs) such as Metformin hydrochloride. The authors used ten nanosecond duration pulses (FWHM) from a Nd:YAG laser produces the induced breakdown for the analysis. Light is collected and focused into a Cerny-Turner spectrograph and dispersed into an ICCD camera for its detection. We used atomic emissions from Chlorine atoms present only in APIs as analyte signal. The analysis was improved using Bromine as internal standard. Linear calibration curves from synthetic samples were prepared achieving linearity higher than 99%. Our results were compared with HPLC results and validation was performed by statistical methods. The validation analysis suggests that both methods have no significant differences i.e., the proposed method can be implemented for monitoring the pharmaceutical production process in-situ in real time or for inspection and recognition of authenticity.

  6. Characteristics of solid aerosols produced by optical catapulting studied by laser-induced breakdown spectroscopy

    Science.gov (United States)

    Fortes, F. J.; Laserna, J. J.

    2010-08-01

    Optical catapulting (OC) constitutes an effective method to transport small amounts of different materials in the form of a solid aerosol. In this report, laser-induced breakdown spectroscopy (LIBS) is used for the analysis of those aerosols produced by OC. For this purpose, materials were catapulted using a Q-switch Nd:YAG laser. A second Q-switch Nd:YAG laser was used for LIBS analysis of the ejected particles. Data processing of aerosols was conducted using conditional data analysis. Also, the standard deviation method was used for the qualitative identification of the ejected particles. Two modes of interaction in OC (OC with focused or defocused pulses) have been evaluated and discussed. LIBS demonstrates that the distribution (spreading) of the ejected particles along the propagation axis increased as a function of the interpulse delay time. The mass density and the thickness of the target also play an important role in OC-LIBS.

  7. Measurement of nutrients in green house soil with laser induced breakdown spectroscopy.

    Science.gov (United States)

    Hussain, T; Gondal, M A; Yamani, Z H; Baig, M A

    2007-01-01

    Laser-induced breakdown spectroscopy (LIBS) has been applied for the determination of nutrients in the green house soil samples. We determined appropriate spectral signatures of vital nutrients and calibrated the method to measure the nutrients in a naturally fertilized plot, cultivated with tomato and cucumber plants. From the calibration curves we predicted the concentrations of important nutrients such as Ca, K, P, Mg, Fe, S, Ni and Ba in the soil. Our measurements proved that the LIBS method rapidly and efficiently measures soil nutrients with excellent detection limits of 12, 9, 7, 9, 7, 10, 8 and 12 mg/kg for Ca, K, P, Mg, Fe, S, Ni and Ba respectively with a precision of approximately 2%, The unique features of LIBS for rapid sample analysis demonstrated by this study suggests that this method offers promise for precision measurements of soil nutrients as compared to conventional methods in short span of time.

  8. Laser-induced breakdown spectroscopy: A versatile technique of elemental analysis and its applications

    CERN Document Server

    Rai, V N

    2014-01-01

    This paper reviews the state of art technology of laser induced breakdown spectroscopy (LIBS). Research on LIBS is gaining momentum in the field of instrumentation and data analysis technique due to its wide application in various field particularly in environmental monitoring and in industry. The main focus is on its miniaturization for field application and on increasing its sensitivity. The sensitivity of LIBS has been increased by confining the laser produced plasma using external magnetic field as well as using two successive laser pulse excitation of plasma. LIBS has capability for simultaneous multi element determination, localized microanalysis, surface analysis and has been used successfully for determination and identification of hazardous explosive and biological samples. Experimental findings of LIBS study in different applications have been discussed.

  9. Preliminary evaluation of laser-induced breakdown spectroscopy for tissue classification

    Energy Technology Data Exchange (ETDEWEB)

    Yueh Fangyu [Institute for Clean Energy Technology, Mississippi State University, Starkville, MS 39759 (United States); Zheng Hongbo [Department of Applied Physics, Nanjing University of Technology, Nanjing, Jiangsu, 210009 (China); Singh, Jagdish P., E-mail: singh@icet.msstate.ed [Institute for Clean Energy Technology, Mississippi State University, Starkville, MS 39759 (United States); Burgess, Shane [College of Veterinary Medicine, Mississippi State University, Mississippi State, MS 39762 (United States)

    2009-10-15

    Laser-induced breakdown spectroscopy (LIBS) is an on-line, real-time technology that can produce immediate information about the elemental contents of tissue samples. We have previously shown that LIBS may be used to distinguish cancerous from non-cancerous tissue. In this work, we study LIBS spectra produced from chicken brain, lung, spleen, liver, kidney and skeletal muscle. Different data processing techniques were used to study if the information contained in these LIBS spectra is able to differentiate between different types of tissue samples and then identify unknown tissues. We have demonstrated a clear distinguishing between each of the known tissue types with only 21 selected analyte lines from each observed LIBS spectrum. We found that in order to produce an analytical model to work well with new sample we need to have representative training data to cover a wide range of spectral variation due to experimental or environmental changes.

  10. Temperature Effect on the Optical Emission Intensity in Laser Induced Breakdown Spectroscopy of Super Alloys

    Science.gov (United States)

    Darbani, S. M. R.; Ghezelbash, M.; Majd, A. E.; Soltanolkotabi, M.; Saghafifar, H.

    2014-12-01

    In this paper, the influence of heating and cooling samples on the optical emission spectra and plasma parameters of laser-induced breakdown spectroscopy for Titanium 64, Inconel 718 super alloys, and Aluminum 6061 alloy is investigated. Samples are uniformly heated up to approximately 200°C and cooled down to -78°C by an external heater and liquid nitrogen, respectively. Variations of plasma parameters like electron temperature and electron density with sample temperature are determined by using Boltzmann plot and Stark broadening methods, respectively. Heating the samples improves LIBS signal strength and broadens the width of the spectrum. On the other hand, cooling alloys causes fluctuations in the LIBS signal and decrease it to some extent, and some of the spectral peaks diminish. In addition, our results show that electron temperature and electron density depend on the sample temperature variations.

  11. 3D Imaging of Nanoparticle Distribution in Biological Tissue by Laser-Induced Breakdown Spectroscopy

    Science.gov (United States)

    Gimenez, Y.; Busser, B.; Trichard, F.; Kulesza, A.; Laurent, J. M.; Zaun, V.; Lux, F.; Benoit, J. M.; Panczer, G.; Dugourd, P.; Tillement, O.; Pelascini, F.; Sancey, L.; Motto-Ros, V.

    2016-07-01

    Nanomaterials represent a rapidly expanding area of research with huge potential for future medical applications. Nanotechnology indeed promises to revolutionize diagnostics, drug delivery, gene therapy, and many other areas of research. For any biological investigation involving nanomaterials, it is crucial to study the behavior of such nano-objects within tissues to evaluate both their efficacy and their toxicity. Here, we provide the first account of 3D label-free nanoparticle imaging at the entire-organ scale. The technology used is known as laser-induced breakdown spectroscopy (LIBS) and possesses several advantages such as speed of operation, ease of use and full compatibility with optical microscopy. We then used two different but complementary approaches to achieve 3D elemental imaging with LIBS: a volume reconstruction of a sliced organ and in-depth analysis. This proof-of-concept study demonstrates the quantitative imaging of both endogenous and exogenous elements within entire organs and paves the way for innumerable applications.

  12. [Application progress of laser-induced breakdown spectroscopy for surface analysis in materials science field].

    Science.gov (United States)

    Zhang, Yong; Jia, Yun-Hai; Chen, Ji-Wen; Liu, Ying; Shen, Xue-Jing; Zhao, Lei; Wang, Shu-Ming; Yu, Hong; Han, Peng-Cheng; Qu, Hua-Yang; Liu, Shao-Zun

    2012-06-01

    As a truly surface analytical tool, laser-induced breakdown spectroscopy (LIBS) was developed in recent ten years, and in this paper, fundamental theory, instrumentation and it's applications in material science are reviewed in detail. Application progress of elemental distribution and depth profile analysis are mainly discussed in the field of metallurgy, semiconductor and electronical materials at home and abroad. It is pointed out that the pulse energy, ambient gas and it's pressure, and energy distribution of laser beam strongly influence spatial and depth resolution, and meanwhile a approach to improving resolution considering analytical sensitivity is provided. Compared with traditional surface analytical methods, the advantage of LIBS is very large scanning area, high analytical speed, and that conducting materials or non-conducting materials both can be analyzed. It becomes a powerful complement of traditional surface analytical tool.

  13. Effect of cylindrical cavity height on laser-induced breakdown spectroscopy with spatial confinement

    Science.gov (United States)

    Junfeng, Shao; Tingfeng, Wang; Jin, Guo; Anmin, Chen; Mingxing, Jin

    2017-02-01

    In this paper, we present a study on the spatial confinement effect of laser-induced plasma with a cylindrical cavity in laser-induced breakdown spectroscopy (LIBS). The emission intensity with the spatial confinement is dependent on the height of the confinement cavity. It is found that, by selecting the appropriate height of cylindrical cavity, the signal enhancement can be significantly increased. At the cylindrical cavity (diameter = 2 mm) with a height of 6 mm, the enhancement ratio has the maximum value (approximately 8.3), and the value of the relative standard deviation (RSD) (7.6%) is at a minimum, the repeatability of LIBS signal is best. The results indicate that the height of confinement cavity is very important for LIBS technique to reduce the limit of detection and improve the precision.

  14. Quantitative analysis of impurities in aluminum alloys by laser-induced breakdown spectroscopy without internal calibration

    Institute of Scientific and Technical Information of China (English)

    LI Hong-kun; LIU Ming; CHEN Zhi-jiang; LI Run-hua

    2008-01-01

    To develop a fast and sensitive alloy elemental analysis method, a laser-induced breakdown spectroscopy(LIBS) system was established and used to carry out quantitative analysis of impurities in aluminum alloys in air at atmospheric pressure. A digital storage oscilloscope was used as signal recording instrument, instead of traditional gate integrator or Boxcar averager, to reduce the cost of the whole system. Linear calibration curves in the concentration range of 4×10-5-10-2 are built for Mg, Cr, Mn, Cu and Zn using absolute line intensity without internal calibrations. Limits of detection for these five elements in aluminum alloy are determined to be (2-90)×10-6. It is demonstrated that LIBS can provide quantitative trace elemental analysis in alloys even without internal calibration. This approach is easy to use in metallurgy industries and relative research fields.

  15. Application of laser-induced breakdown spectroscopy to the analysis of algal biomass for industrial biotechnology

    Science.gov (United States)

    Pořízka, P.; Prochazka, D.; Pilát, Z.; Krajcarová, L.; Kaiser, J.; Malina, R.; Novotný, J.; Zemánek, P.; Ježek, J.; Šerý, M.; Bernatová, S.; Krzyžánek, V.; Dobranská, K.; Novotný, K.; Trtílek, M.; Samek, O.

    2012-08-01

    We report on the application of laser-induced breakdown spectroscopy (LIBS) to the determination of elements distinctive in terms of their biological significance (such as potassium, magnesium, calcium, and sodium) and to the monitoring of accumulation of potentially toxic heavy metal ions in living microorganisms (algae), in order to trace e.g. the influence of environmental exposure and other cultivation and biological factors having an impact on them. Algae cells were suspended in liquid media or presented in a form of adherent cell mass on a surface (biofilm) and, consequently, characterized using their spectra. In our feasibility study we used three different experimental arrangements employing double-pulse LIBS technique in order to improve on analytical selectivity and sensitivity for potential industrial biotechnology applications, e.g. for monitoring of mass production of commercial biofuels, utilization in the food industry and control of the removal of heavy metal ions from industrial waste waters.

  16. Laser ablation-laser induced breakdown spectroscopy for the measurement of total elemental concentration in soils.

    Science.gov (United States)

    Pareja, Jhon; López, Sebastian; Jaramillo, Daniel; Hahn, David W; Molina, Alejandro

    2013-04-10

    The performances of traditional laser-induced breakdown spectroscopy (LIBS) and laser ablation-LIBS (LA-LIBS) were compared by quantifying the total elemental concentration of potassium in highly heterogeneous solid samples, namely soils. Calibration curves for a set of fifteen samples with a wide range of potassium concentrations were generated. The LA-LIBS approach produced a superior linear response different than the traditional LIBS scheme. The analytical response of LA-LIBS was tested with a large set of different soil samples for the quantification of the total concentration of Fe, Mn, Mg, Ca, Na, and K. Results showed an acceptable linear response for Ca, Fe, Mg, and K while poor signal responses were found for Na and Mn. Signs of remaining matrix effects for the LA-LIBS approach in the case of soil analysis were found and discussed. Finally, some improvements and possibilities for future studies toward quantitative soil analysis with the LA-LIBS technique are suggested.

  17. Detection of Minerals in Green Leafy Vegetables Using Laser Induced Breakdown Spectroscopy

    Science.gov (United States)

    Shukla, P.; Kumar, R.; Raib, A. Kumar

    2016-11-01

    The distribution of minerals in different green leafy vegetables, such as spinach, chenopodium, chickpea, mustard, and fenugreek, was calculated using laser induced breakdown spectroscopy (LIBS). LIBS can provide an easy, reliable, efficient, low-cost, and in situ chemical analysis with a reasonable precision. In situ LIBS spectra in the range 200-500 nm were carried out using fresh leaves and leaves in the pellet form. As the spectra suggest, magnesium and calcium are present in each vegetable; however, the amount of them varies. It is observed that the amount of iron is maximal in spinach. The nutrition value of the plants was analyzed, and it was revealed that they are low in calories and fat and high in protein, fiber, iron, calcium, and phytochemicals.

  18. Quantitative analysis of Cu and Co adsorbed on fish bones via laser-induced breakdown spectroscopy

    Science.gov (United States)

    Rezk, R. A.; Galmed, A. H.; Abdelkreem, M.; Ghany, N. A. Abdel; Harith, M. A.

    2016-09-01

    In the present work, laser-induced breakdown spectroscopy (LIBS) has been applied for qualitative and quantitative analysis of heavy metals adsorbed by fish bones. Fish bones were used as a natural and low cost heavy metal sorbent (mainly Cu and Co) from synthetic wastewater. The removal efficiency of the adsorbent was studied as a function of initial metal concentration and pH value. Optimal experimental conditions were evaluated for improving the sensitivity of LIBS technique through parametric dependence studies. Furthermore, calibration curves were constructed based on X-ray fluorescence (XRF) analysis technique, whereas, the limits of detection (LOD) for Cu and Co were calculated. The results were validated by comparing LIBS data with those obtained by XRF spectrometry. The results of the two techniques are strongly correlated which verified the feasibility of using LIBS to detect traces of heavy metals adsorbed from wastewater by fish bones. This study reflects the potential of using LIBS in environmental applications.

  19. Quantitative mixture fraction measurements in combustion system via laser induced breakdown spectroscopy

    KAUST Repository

    Mansour, Mohy S.

    2015-01-01

    Laser induced breakdown spectroscopy (LIBS) technique has been applied to quantitative mixture fraction measurements in flames. The measured spectra of different mixtures of natural gas and air are used to obtain the calibration parameters for local elemental mass fraction measurements and hence calculate the mixture fraction. The results are compared with the mixture fraction calculations based on the ratios of the spectral lines of H/N elements, H/O elements and C/(N+O) and they show good agreement within the reaction zone of the flames. Some deviations are observed outside the reaction zone. The ability of LIBS technique as a tool for quantitative mixture fraction as well as elemental fraction measurements in reacting and non-reacting of turbulent flames is feasible. © 2014 Elsevier Ltd. All rights reserved.

  20. Rapid Elemental Analysis and Provenance Study of Blumea balsamifera DC Using Laser-Induced Breakdown Spectroscopy

    Directory of Open Access Journals (Sweden)

    Xiaona Liu

    2014-12-01

    Full Text Available Laser-induced breakdown spectroscopy (LIBS was applied to perform a rapid elemental analysis and provenance study of Blumea balsamifera DC. Principal component analysis (PCA and partial least squares discriminant analysis (PLS-DA were implemented to exploit the multivariate nature of the LIBS data. Scores and loadings of computed principal components visually illustrated the differing spectral data. The PLS-DA algorithm showed good classification performance. The PLS-DA model using complete spectra as input variables had similar discrimination performance to using selected spectral lines as input variables. The down-selection of spectral lines was specifically focused on the major elements of B. balsamifera samples. Results indicated that LIBS could be used to rapidly analyze elements and to perform provenance study of B. balsamifera.

  1. Application of laser-induced breakdown spectroscopy (LIBS) and neural networks to olive oils analysis.

    Science.gov (United States)

    Caceres, Jorge O; Moncayo, Samuel; Rosales, Juan D; de Villena, Francisco Javier Manuel; Alvira, Fernando C; Bilmes, Gabriel M

    2013-09-01

    The adulteration and traceability of olive oils are serious problems in the olive oil industry. In this work, a method based on laser-induced breakdown spectroscopy (LIBS) and neural networks (NNs) has been developed and applied to the identification, quality control, traceability, and adulteration detection of extra virgin olive oils. Instant identification of the samples is achieved using a spectral library, which was obtained by analysis of representative samples using a single laser pulse and treatment by NNs. The samples used in this study belong to four countries. The study also included different regions of each country. The results obtained allow the identification of the oils tested with a certainty of more than 95%. Single-shot measurements were enough for clear identification of the samples. The method can be developed for automatic real-time, fast, reliable, and robust measurements, and the system can be packed into portable form for non-specialist users.

  2. Identification and discrimination of bacterial strains by laser induced breakdown spectroscopy and neural networks.

    Science.gov (United States)

    Marcos-Martinez, D; Ayala, J A; Izquierdo-Hornillos, R C; de Villena, F J Manuel; Caceres, J O

    2011-05-15

    A method based on laser induced breakdown spectroscopy (LIBS) and neural networks (NNs) has been developed and applied to the identification and discrimination of specific bacteria strains (Pseudomonas aeroginosa, Escherichia coli and Salmonella typhimurium). Instant identification of the samples is achieved using a spectral library, which was obtained by analysis using a single laser pulse of representative samples and treatment by neural networks. The samples used in this study were divided into three groups, which were prepared on three different days. The results obtained allow the identification of the bacteria tested with a certainty of over 95%, and show that only a difference between the bacteria can cause identification. Single-shot measurements were sufficient for clear identification of the bacterial strains studied. The method can be developed for automatic real time, fast, reliable and robust measurements and can be packaged in portable systems for non-specialist users. Copyright © 2011 Elsevier B.V. All rights reserved.

  3. Rapid elemental analysis and provenance study of Blumea balsamifera DC using laser-induced breakdown spectroscopy.

    Science.gov (United States)

    Liu, Xiaona; Zhang, Qiao; Wu, Zhisheng; Shi, Xinyuan; Zhao, Na; Qiao, Yanjiang

    2014-12-31

    Laser-induced breakdown spectroscopy (LIBS) was applied to perform a rapid elemental analysis and provenance study of Blumea balsamifera DC. Principal component analysis (PCA) and partial least squares discriminant analysis (PLS-DA) were implemented to exploit the multivariate nature of the LIBS data. Scores and loadings of computed principal components visually illustrated the differing spectral data. The PLS-DA algorithm showed good classification performance. The PLS-DA model using complete spectra as input variables had similar discrimination performance to using selected spectral lines as input variables. The down-selection of spectral lines was specifically focused on the major elements of B. balsamifera samples. Results indicated that LIBS could be used to rapidly analyze elements and to perform provenance study of B. balsamifera.

  4. Influence of Lead on the Interpretation of Bone Samples with Laser-Induced Breakdown Spectroscopy

    Directory of Open Access Journals (Sweden)

    Abdolhamed Shahedi

    2016-01-01

    Full Text Available This study is devoted to tracing and identifying the elements available in bone sample using Laser-Induced Breakdown Spectroscopy (LIBS. The bone samples were prepared from the thigh of laboratory rats, which consumed 325.29 g/mol lead acetate having 4 mM concentration in specified time duration. About 76 atomic lines have been analyzed and we found that the dominant elements are Ca I, Ca II, Mg I, Mg II, Fe I, and Fe II. Temperature curve and bar graph were drawn to compare bone elements of group B which consumed lead with normal group, group A, in the same laboratory conditions. Plasma parameters including plasma temperature and electron density were determined by considering Local Thermodynamic Equilibrium (LTE condition in the plasma. An inverse relationship has been detected between lead absorption and elements like Calcium and Magnesium absorption comparing elemental values for both the groups.

  5. Carbon determination in carbon-manganese steels under atmospheric conditions by Laser-Induced Breakdown Spectroscopy.

    Science.gov (United States)

    Labutin, Timur A; Zaytsev, Sergey M; Popov, Andrey M; Zorov, Nikita B

    2014-09-22

    The most sensitive lines of carbon, used nowadays for its determination in steels by laser-induced-breakdown spectroscopy (LIBS), are at vacuum UV and, thereby, LIBS potential is significantly reduced. We suggested the use of the C I 833.51 nm line for carbon determination in low-alloy steels (c(C)~0.186-1.33 wt.%) in air. Double-pulse LIBS with the collinear scheme was performed for maximal enhancement of a carbon emission signal without substantial complication of experimental setup. Since this line is strongly broadened in laser plasma, it overlapped with the closest iron lines greatly. We implemented a PCR method for the construction of a multivariate calibration model under spectral interferences. The model provided a RMSECV = 0.045 wt.%. The predicted carbon content in the rail templet was in an agreement with the reference value obtained by a combustion analyzer within the relative error of 6%.

  6. Sensing Technique Using Laser-induced Breakdown Spectroscopy Integrated with Micro-droplet Ejection System

    Directory of Open Access Journals (Sweden)

    Satoshi Ikezawa

    2008-04-01

    Full Text Available In this paper, laser-induced breakdown spectroscopy (LIBS using micro-droplet NaCl solution is described. Since the 1980s, many liquid micronizing techniques for LIBS measurements have been reported. In this study, micro-droplet ejection systems for sampling are designed and presented for two volumes. These micro-droplet ejection systems enable a constant volume of the sample liquid to be obtained and they take advantage of the liquid physical state; the density of the solution can be controlled accurately. The methods presented here generate small droplets (diameter 30 or 50 μm by confining the entire volume of the sample material in the laser beam spot area (minimum beam spot diameter: 53.2 μm and separating it from its surroundings. Using these liquid micronizing methods, improved sensitivities are obtained for drawing calibration curves for quantitative LIBS measurements.

  7. Determination of Different Metals in Steel Waste Samples Using laser Induced Breakdown Spectroscopy

    Directory of Open Access Journals (Sweden)

    A. H. Bakry

    2007-12-01

    Full Text Available Elemental analysis of waste samples collected from steel products manufacturing plant (SPS located at industrial city of Jeddah, Saudi-Arabia has been carried out using Laser Induced Breakdown Spectroscopy (LIBS. The 1064 nm laser radiations from a Nd:YAG laser at an irradiance of 7.6  1010 W cm –2 were used. Atomic emission spectra of the elements present in the waste samples were recorded in the 200 – 620 nm region. Elements such as Fe, W, Ti, Al, Mg, Ca, S, Mn, and Na were detected in these samples. Quantitative determination of the elemental concentration was obtained for these metals against certified standard samples. Parametric dependences of LIBS signal intensity on incident laser energy and time delay between the laser pulse and data acquisition system were also carried out.

  8. Characterization of femtosecond laser-induced breakdown spectroscopy (fsLIBS) and applications for biological samples.

    Science.gov (United States)

    Gill, Ruby K; Knorr, Florian; Smith, Zachary J; Kahraman, Mehmet; Madsen, Dorte; Larsen, Delmar S; Wachsmann-Hogiu, Sebastian

    2014-01-01

    We characterize the femtosecond laser-induced breakdown spectroscopy (fsLIBS) signal for biological tissues as a function of different excitation parameters with femtosecond laser systems. These parameters include laser energy, depth of focus, and number of pulses per focal volume. We used femtosecond laser pulses of 800 nm and energy between 25 and 123 μJ to generate LIBS signals in biological tissues. As expected, we observed a linear increase in the fsLIBS intensity as a function of the laser energy. In addition, we show that moving the beam out of focus and the presence of overlapping pulses on the same focal area leads to a decrease in fsLIBS intensity due to changes in focal spot size. We also demonstrate that fsLIBS can distinguish between different biological tissue samples.

  9. Detection of Elemental Composition of Lubricating Grease Using Laser Induced Breakdown Spectroscopy

    Directory of Open Access Journals (Sweden)

    Cherry Dhiman

    2014-12-01

    Full Text Available The elemental composition of lubricating soft grease used in rail engines are studied using laser induced breakdown spectroscopy (LIBS technique. LIBS spectra of fresh, partially used and fully used grease samples are recorded using time-gated ICCD spectrometer for verification of compositional degradation of the used grease. LIBS spectra of grease samples are analyzed by comparing with emission spectra of elements published by NIST standard database. Many spectral lines of impurity elements like Fe, Cu, Ba, Mg, Mn, Ni, S, Zn, Si, Pb, Ti, Ca and Al present in the grease in ppm or ppb level in trace level concentrations are observed in excess in the used grease mainly due to wear and tear. On the other hand in fresh grease, spectral lines of Ca, Al and Na are observed predominantly.

  10. Laser-induced breakdown spectroscopy and chemometrics: a novel potential method to analyze wheat grains.

    Science.gov (United States)

    Martelli, Milena R; Brygo, François; Sadoudi, Abdelkrim; Delaporte, Philippe; Barron, Cécile

    2010-06-23

    Laser-induced breakdown spectroscopy (LIBS) has been widely used to evaluate the elemental composition (e.g., minerals or metal accumulation) on vegetal tissues. The main objective of this work was to differentiate wheat outer tissues during the grain ablation using LIBS and univariate/multivariate analysis. A high resolution spectrometer and a Nd:YAG laser (532 nm, 5 ns) was first used in order to easily identify atomic wheat emission lines. Then a pulsed excimer laser ArF (193 nm, 15 ns) and a compact fiber optic spectrometer was used to acquire LIBS spectral data from each pulse. Univariate and multivariate analyses (MW2D, PLS-DA) were carried out to provide more in depth information from the LIBS experiment. The number of pulses needed to ablate wheat tissues was successfully predicted by the supervised pattern recognition procedure. LIBS used in conjunction with multivariate analysis could be an interesting technique for rapid structural analysis of vegetal material.

  11. Validation of the solidifying soil process using laser-induced breakdown spectroscopy

    Science.gov (United States)

    Lin, Zhao-Xiang; Liu, Lin-Mei; Liu, Lu-Wen

    2016-09-01

    Although an Ionic Soil Stabilizer (ISS) has been widely used in landslide control, it is desirable to effectively monitor the stabilization process. With the application of laser-induced breakdown spectroscopy (LIBS), the ion contents of K, Ca, Na, Mg, Al, and Si in the permeable fluid are detected after the solidified soil samples have been permeated. The processes of the Ca ion exchange are analyzed at pressures of 2 and 3 atm, and it was determined that the cation exchanged faster as the pressure increased. The Ca ion exchanges were monitored for different stabilizer mixtures, and it was found that a ratio of 1:200 of ISS to soil is most effective. The investigated plasticity and liquidity indexes also showed that the 1:200 ratio delivers the best performance. The research work indicates that it is possible to evaluate the engineering performances of soil solidified by ISS in real time and online by LIBS.

  12. Double pulse laser-induced breakdown spectroscopy of explosives: Initial study towards improved discrimination

    Energy Technology Data Exchange (ETDEWEB)

    De Lucia, Frank C. [U.S. Army Research Laboratory, AMSRD-ARL-WM-BD, Aberdeen Proving Ground, MD, 21005-5069 (United States)], E-mail: fdelucia@arl.army.mil; Gottfried, Jennifer L.; Munson, Chase A.; Miziolek, Andrzej W. [U.S. Army Research Laboratory, AMSRD-ARL-WM-BD, Aberdeen Proving Ground, MD, 21005-5069 (United States)

    2007-12-15

    Detecting trace explosive residues at standoff distances in real-time is a difficult problem. One method ideally suited for real-time standoff detection is laser-induced breakdown spectroscopy (LIBS). However, atmospheric oxygen and nitrogen contributes to the LIBS signal from the oxygen- and nitrogen-containing explosive compounds, complicating the discrimination of explosives from other organic materials. While bathing the sample in an inert gas will remove atmospheric oxygen and nitrogen interference, it cannot practically be applied for standoff LIBS. Alternatively, we have investigated the potential of double pulse LIBS to improve the discrimination of explosives by diminishing the contribution of atmospheric oxygen and nitrogen to the LIBS signal. These initial studies compare the close-contact (< 1 m) LIBS spectra of explosives using single pulse LIBS in argon with double pulse LIBS in atmosphere. We have demonstrated improved discrimination of an explosive and an organic interferent using double pulse LIBS to reduce the air entrained in the analytical plasma.

  13. Multivariate analysis of laser-induced breakdown spectroscopy chemical signatures for geomaterial classification

    Energy Technology Data Exchange (ETDEWEB)

    Gottfried, Jennifer L., E-mail: jennifer.gottfried@us.army.mi [US Army Research Laboratory, Aberdeen Proving Ground, MD 21005-5069 (United States); Harmon, Russell S. [ARL Army Research Office, PO Box 12211, Research Triangle Park, NC 27709-2211 (United States); De Lucia, Frank C.; Miziolek, Andrzej W. [US Army Research Laboratory, Aberdeen Proving Ground, MD 21005-5069 (United States)

    2009-10-15

    A large suite of natural carbonate, fluorite and silicate geological materials was studied using laser-induced breakdown spectroscopy (LIBS). Both single- and double-pulse LIBS spectra were acquired using close-contact benchtop and standoff (25 m) LIBS systems. Principal components analysis (PCA) and partial least squares discriminant analysis (PLS-DA) were used to identify the distinguishing characteristics of the geological samples and to classify the materials. Excellent discrimination was achieved with all sample types using PLS-DA and several techniques for improving sample classification were identified. The laboratory double-pulse LIBS system did not provide any advantage for sample classification over the single-pulse LIBS system, except in the case of the soil samples. The standoff LIBS system provided comparable results to the laboratory systems. This work also demonstrates how PCA can be used to identify spectral differences between similar sample types based on minor impurities.

  14. Research progress in Asia on methods of processing laser-induced breakdown spectroscopy data

    Science.gov (United States)

    Guo, Yang-Min; Guo, Lian-Bo; Li, Jia-Ming; Liu, Hong-Di; Zhu, Zhi-Hao; Li, Xiang-You; Lu, Yong-Feng; Zeng, Xiao-Yan

    2016-10-01

    Laser-induced breakdown spectroscopy (LIBS) has attracted much attention in terms of both scientific research and industrial application. An important branch of LIBS research in Asia, the development of data processing methods for LIBS, is reviewed. First, the basic principle of LIBS and the characteristics of spectral data are briefly introduced. Next, two aspects of research on and problems with data processing methods are described: i) the basic principles of data preprocessing methods are elaborated in detail on the basis of the characteristics of spectral data; ii) the performance of data analysis methods in qualitative and quantitative analysis of LIBS is described. Finally, a direction for future development of data processing methods for LIBS is also proposed.

  15. Mixture distribution measurement using laser induced breakdown spectroscopy in hydrogen direct injection stratified charge

    Energy Technology Data Exchange (ETDEWEB)

    Shudo, Toshio [Applied Energy System Group, Division of Energy and Environmental Systems, Hokkaido University, N13 W8 Kita-Ward, Sapporo, Hokkaido 060-8628 (Japan); Oba, Shuji [Mazda Motor Corporation, Hiroshima 730-8670 (Japan)

    2009-03-15

    Reduction in cooling loss due to the heat transfer from burning gas to the combustion chamber wall is very important for improving the thermal efficiency in hydrogen engines. The previous research has shown that the direct injection stratified charge can be a technique to reduce the cooling loss and improve thermal efficiency in hydrogen combustion. For effective reductions in cooling loss by the stratified charge, it is very important to know the relation between the fuel injection conditions and mixture distribution. The current research employs the laser induced breakdown spectroscopy as a method to measure the hydrogen concentration distribution in the direct injection stratified charge. Measurement of instantaneous local equivalence ratio by the method clears the characteristics of mixture formation in hydrogen direct injection stratified charge. This research also tries to actively control the mixture distribution using a split fuel injection. (author)

  16. Kinetic model of atomic and molecular emissions in laser-induced breakdown spectroscopy of organic compounds.

    Science.gov (United States)

    Ma, Qianli; Dagdigian, Paul J

    2011-07-01

    A kinetic model previously developed to predict the relative intensities of atomic emission lines in laser-induced breakdown spectroscopy has been extended to include processes related to CN and C(2) molecular emissions. Simulations with this model were performed to predict the relative excited-state populations. The results from the simulations are compared with experimentally determined excited-state populations from 1,064 nm laser irradiation of organic residues on aluminum foil. The model reasonably predicts the relative intensity of the molecular emissions. Significantly, the model reproduces the vastly different temporal profiles of the atomic and molecular emissions. The latter are found to extend to much longer times after the laser pulse, and this appears to be due to the increasing concentration of the molecules versus time. From the simulations, the important processes affecting the CN and C(2) concentrations are identified.

  17. Laser Induced Breakdown Spectroscopy of meteorites as a probe of the early solar system

    Science.gov (United States)

    Dell'Aglio, M.; De Giacomo, A.; Gaudiuso, R.; De Pascale, O.; Longo, S.

    2014-11-01

    This paper presents an evaluation of Laser Induced Breakdown Spectroscopy (LIBS) as a technique for gathering data relevant to Solar System geophysics. Two test cases were demonstrated: elemental analysis of chondrules in a chondrite meteorite, and space- resolved analysis of the interface between kamacite and taenite crystals in an octahedrite iron meteorite. In particular most major and minor elements (Fe, Mg, Si, Ti, Al, Cr, Mn, Ca, Fe, Ni, Co) in Sahara 98222 (chondrite) and its chondrules, as well as the profile of Ni content in Toluca (iron meteorite), were determined with the Calibration Free (CF) method. A special attention was devoted to exploring the possibilities offered by variants of the basic technique, such as the use of Fe I Boltzmann distribution as an intensity calibration method of the spectroscopic system, and the use of spatially resolved analysis.

  18. Laser Induced Breakdown Spectroscopy applications to meteorites: Chemical analysis and composition profiles

    Science.gov (United States)

    Dell'Aglio, M.; De Giacomo, A.; Gaudiuso, R.; Pascale, O. De; Senesi, G. S.; Longo, S.

    2010-12-01

    A fast procedure for chemical analysis of different meteorites is presented, based on LIBS (Laser Induced Breakdown Spectroscopy). The technique is applied to several test cases (Dhofar 019, Dhofar 461, Sahara 98222, Toluca, Sikhote Alin and Campo del Cielo) and can be useful for rapid meteorite identification providing geologists with specific chemical information for meteorite classification. Concentration profiles of Fe, Ni and Co are simultaneously detected across the Widmanstätten structure of the iron meteorite Toluca with a view to determining cooling rates. The LIBS analysis of meteorites is also used as a laboratory test for analogous studies on the respective parent bodies (Mars, asteroids) in space exploration missions where one clear advantage of the proposed technique is that no direct contact with the sample is required.

  19. Qualitative and quantitative laser-induced breakdown spectroscopy of bronze objects

    Science.gov (United States)

    Tankova, V.; Blagoev, K.; Grozeva, M.; Malcheva, G.; Penkova, P.

    2016-03-01

    Laser-induced breakdown spectroscopy (LIBS) is an analytical technique for qualitative and quantitative elemental analysis of solids, liquids and gases. In this work, the method was applied for investigation of archaeological bronze objects. The analytical information obtained by LIBS was used for qualitative determination of the elements in the material used for manufacturing of the objects under study. Quantitative chemical analysis was also performed after generating calibration curves with standard samples of similar matrix composition. Quantitative estimation of the elemental concentration of the bulk of the samples was performed, together with investigation of the surface layer of the objects. The results of the quantitative analyses gave indications about the manufacturing process of the investigated objects.

  20. Use of laser induced breakdown spectroscopy in the determination of gem provenance: beryls.

    Science.gov (United States)

    McManus, Catherine E; McMillan, Nancy J; Harmon, Russell S; Whitmore, Robert C; De Lucia, Frank C; Miziolek, Andrzej W

    2008-11-01

    The provenance of gem stones has been of interest to geologists, gemologists, archeologists, and historians for centuries. Laser induced breakdown spectroscopy (LIBS) provides a minimally destructive tool for recording the rich chemical signatures of gem beryls (aquamarine, goshenite, heliodor, and morganite). Broadband LIBS spectra of 39 beryl (Be(3)Al(2)Si(6)O(18)) specimens from 11 pegmatite mines in New Hampshire, Connecticut, and Maine (USA) are used to assess the potential of using principal component analysis of LIBS spectra to determine specimen provenance. Using this technique, beryls from the three beryl-bearing zones in the Palermo #1 pegmatite (New Hampshire) can be recognized. However, the compositional variation within this single mine is comparable to that in beryls from all three states. Thus, a very large database with detailed location metadata will be required to routinely determine gem beryl provenance.

  1. A Hydrogel's Formation Device for Quick Analysis of Liquid Samples Using Laser-Induced Breakdown Spectroscopy

    Science.gov (United States)

    Guo, Guangmeng; Wang, Jie; Bian, Fang; Tian, Di; Fan, Qingwen

    2016-06-01

    The laser-induced breakdown spectroscopy technique has irreplaceable advantages in the field of detection due to its multi-phase specimen detection ability. The development of the LIBS technique for liquid analysis is obstructed by its inherent drawbacks like the surface ripples and extinction of emitted intensity, which make it unpractical. In this work, an in-situ hydrogel formation sampling device was designed and used the hydrogel as the detection phase of LIBS for Cu, Cr and Al in an aqueous solution. With the measured amount of resin placed in the device, the formed hydrogel could be obtained within 20 s after putting the device into water solution. The formed hydrogel could be directly analyzed by LIBS and reflect the elemental information of the water sample. The prominent performance made this hydrogel's formation device especially suitable for quick in-situ environmental liquid analysis using LIBS.

  2. The Influence of Acquisition Delay for Calibration-Free Laser-Induced Breakdown Spectroscopy.

    Science.gov (United States)

    Fu, Hongbo; Dong, Fengzhong; Ni, Zhibo; Wang, Jingge

    2016-03-01

    Time-resolved spectra of neutral and ionized atomic emissions from slag sample are measured by laser-induced breakdown spectroscopy (LIBS). Various factors affecting the calibration-free CF-LIBS method are carefully analyzed, and subsequently these factors are either avoided or corrected. Plasma temperature and electron density are calculated by Saha-Boltzmann plot and Stark broadening of Ca, respectively. At the same time, self-absorption and local thermodynamic equilibrium have been carefully studied. An automatic spectral lines elimination algorithm is applied to calculate plasma temperature and element concentration. The calculated element concentrations show marked changes with acquisition time increasing. Due to the influence of continuous spectrum at early times and self-absorption at late times, the large absolute errors sum is obtained in these two periods. The smallest absolute errors sum corresponds to the gate delay time 1.5 μs < td < 2 μs for our experimental setup.

  3. The Study of Carious Teeth by Laser-Induced Breakdown Spectroscopy

    Science.gov (United States)

    Hamzaoui, S.; Nouir, R.; Jaidene, N.

    2017-03-01

    The aim of this work is a multi-component analysis of the element composition of the enamel and carious parts of teeth and the quantification of enamel demineralization using laser-induced breakdown spectroscopy (LIBS). For each tooth the P/Ca ratios of the emission line intensities in the enamel part and those in the carious regions were compared. Since zinc is a trace element, the same procedure was performed for Zn/Ca ratios in the enamel and carious parts. These comparisons showed that the mineral loss from carious lesions occurs at different rates for the studied elements. Calcium has the highest casualty rate. On the other hand, the zinc level diminishes also in the carious region but at a lower rate. The lines were obtained from plume plasma emission generated on the enamel and carious regions.

  4. Double-pulse laser-induced breakdown spectroscopy analysis of scales from petroleum pipelines

    Energy Technology Data Exchange (ETDEWEB)

    Cavalcanti, G.H. [Physics Department of University Federal Fluminense, Av. Gal. Milton Tavares de Souza, s/n" o – CEP 24210-346 – Niterói, Rio de Janeiro (Brazil); Rocha, A.A. [Department of Analytical Chemistry of the Fluminense Federal University (UFF), Niterói, Rio de Janeiro CEP: 24020-141 (Brazil); Damasceno, R.N. [Biomass and Water Research Center of the Fluminense Federal University (NAB/UFF), Niterói, Rio de Janeiro (Brazil); Legnaioli, S.; Lorenzetti, G.; Pardini, L. [Institute of Chemistry of Organometallic Compounds Of CNR, Research Area of National Research Council, Via G. Moruzzi, 1 — 56124 Pisa (Italy); Palleschi, V., E-mail: vincenzo.palleschi@cnr.it [Institute of Chemistry of Organometallic Compounds Of CNR, Research Area of National Research Council, Via G. Moruzzi, 1 — 56124 Pisa (Italy)

    2013-09-01

    Pipeline scales from the Campos Bay Petroleum Field near Rio de Janeiro, Brazil have been analyzed by both Raman spectroscopy and by laser-induced breakdown spectroscopy (LIBS) using a double-pulse, calibration-free approach. Elements that are characteristic of petroleum (e.g. C, H, N, O, Mg, Na, Fe and V) were detected, in addition to the Ca, Al, and Si which form the matrix of the scale. The LIBS results were compared with the results of micro-Raman spectroscopy, which confirmed the nature of the incrustations inferred by the LIBS analysis. Results of this preliminary study suggest that diffusion of pipe material into the pipeline intake column plays an important role in the growth of scale. Thanks to the simplicity and relative low cost of equipment and to the fact that no special chemical pre-treatment of the samples is needed, LIBS can offer very fast acquisition of data and the possibility of in situ measurements. LIBS could thus represent an alternative or complementary method for the chemical characterization of the scales by comparison to conventional analytical techniques, such as X-ray diffraction or X-ray fluorescence. - Highlights: • Samples of scales from petroleum pipelines were analyzed using double pulse LIBS. • LIBS is proposed as an alternative method to conventional analytical techniques. • The scale growth is influenced by the product of corrosion in the column of production. • The diffusion of pipe material into the inlay is important for the growth of scale.

  5. [Element distribution analysis of welded fusion zone by laser-induced breakdown spectroscopy].

    Science.gov (United States)

    Yang, Chun; Zhang, Yong; Jia, Yun-Hai; Wang, Hai-Zhou

    2014-04-01

    Over the past decade there has been intense activity in the study and development of laser-induced breakdown spectroscopy (LIBS). As a new tool for surface microanalysis, it caused widespread in materials science because of the advantage of rapid and high sensitivity. In the present paper, the distribution of Ni, Mn, C and Si near weld fusion line was analyzed on two kinds of weld sample. Line scanning mode analysis was carried out by three different kinds of methods, namely laser-induced breakdown spectroscopy (LIBS), scanning electron microscope/energy dispersive spectrometer (SEM/EDS) and electron probe X-ray microanalyser (EPMA). The concentration variation trend of Ni and Mn acquired by LIBS is coincident with SEM/EDS and EPMA. The result shows that the content of Ni and Mn was significantly different between weld seam and base metal on both the samples. The content of Ni and Mn was much higher in weld seam than in base metal, and a sharp concentration gradient was analyzed in the fusion zone. According to the distribution of Ni and Mn, all the three methods got a similar value of welded fusion zone width. The concentration variation trend of C and Si acquired by LIBS is not coincident with SEM/EDS and EPMA. The concentration difference between weld seam and base metal was analyzed by LIBS, but had not by SEM/EDS and EPMA, because of the low concentration and slight difference. The concentration gradient of C and Si in fusion zone was shows clearly by LIBS. For higher sensitivity performance, LIBS is much more adapted to analyze low content element than SEM/EDS and EPMA.

  6. Double-pulse laser ablation coupled to laser-induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Glaus, Reto, E-mail: reglaus@ufl.edu; Hahn, David W.

    2014-08-01

    Laser ablation coupled to laser-induced breakdown spectroscopy (LA-LIBS) is an analytical method, which minimizes sample matrix effects typically found in quantitative LIBS-based direct solid analyses. This paper reports the application of double-pulse laser ablation (DP-LA) to improve the analyte response and the achievable precisions of LA-LIBS. Two coaxial laser beams were applied at the ablation site and the analytical signals were then collected from a second free-standing LIBS plasma downstream of the ablation site. Signal improvements of up to one order of magnitude were observed compared to single-pulse LA-LIBS. The effect of the interpulse delay on the observed signal-to-noise ratios was studied and the quantification capabilities of the optimized DP-LA-LIBS setup were investigated for manganese and iron in a broad range of different alloy types. A linear response was observed for manganese across the different matrices, allowing for nonmatrix-matched calibrations. Matrix effects were observed when analyzing aluminum samples, which, however, could be compensated for by applying iron as internal standard. Size distributions of the ablated material and electron density measurements provide additional insight into the double-pulse process, with additional future work suggested. - Highlights: • Double-pulse laser ablation was coupled to laser-induced breakdown spectroscopy. • Nonmatrix-matched calibration of manganese in various alloys was performed. • Improved sensitivities and precisions compared to single-pulse LA were demonstrated. • Remaining matrix effects and internal standardization are discussed.

  7. Detection and evaluation of uranium in different minerals by gamma spectrometry and laser induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Sergani, F.M.; Khedr, M.A.; Harith, M.A. [National Inst. of Laser Enhanced Sciences (NILES), Cairo Univ. (Egypt); El Mongy, S.A. [National Center for Nuclear Safety, Atomic Energy Authority, Nasr City, Cairo (Egypt)

    2004-07-01

    Analysis, detection and evaluation of source nuclear materials (e.g. uranium) in different minerals by sensitive techniques are a vital objective for uranium exploration, nuclear materials extraction, processing and verification. In this work, uranium in different geological formations was determined using gamma spectrometry and laser induced breakdown spectroscopy (LIBS). The investigated samples were collected from different regions distributed all over Egypt. The samples were then prepared for non-destructive analysis. A hyper pure germanium detector was used to measure the emitted gamma rays of uranium and its daughters in the samples. The concentrations of uranium in ppm ({mu}g/g) in the investigated samples are given and discussed in this work. The highest uranium concentration (4354.9 ppm) was found in uranophane samples of Gattar rocks. In Laser induced breakdown spectroscopy (LIBS) technique, plasma was formed by irradiating the rock surface with focused Q-switched Nd:Yag laser pulses of 7 ns pulse duration at the fundamental wavelength (1064 nm). Atoms and ions originating from the rock surface are excited and ionized in the laser produced hot plasma ({proportional_to}10 000 K). The plasma emission spectral line is characteristic of the elements present in the plasma and allows identification of the uranium in the uranophane mineral. The strong atomic line at 424.2 nm is used for the qualitative identification of uranium. It can be mentioned that the elevated levels of uranium in some of the investigated uranophane samples are of great economic feasibility to be extracted. (orig.)

  8. Laser-induced breakdown spectroscopy for the study of the pattern of silicon deposition in leaves of saccharum species

    NARCIS (Netherlands)

    Tripathi, D.K.; Kumar, R.; Chauhan, D.K.; Rai, A.K.; Bicanic, D.D.

    2011-01-01

    The spatial distribution pattern of silicon in the leaves of three species of Saccharum has been demonstrated by means of laser induced breakdown spectroscopy (LIBS). The in-situ point detection capability of LIBS was used to determine different elements in leaf samples. The concentrations of silico

  9. A Simple Laser Induced Breakdown Spectroscopy (LIBS) System for Use at Multiple Levels in the Undergraduate Chemistry Curriculum

    Science.gov (United States)

    Randall, David W.; Hayes, Ryan T.; Wong, Peter A.

    2013-01-01

    A LIBS (laser induced breakdown spectroscopy) spectrometer constructed by the instructor is reported for use in undergraduate analytical chemistry experiments. The modular spectrometer described here is based on commonly available components including a commercial Nd:YAG laser and a compact UV-vis spectrometer. The modular approach provides a…

  10. A Simple Laser Induced Breakdown Spectroscopy (LIBS) System for Use at Multiple Levels in the Undergraduate Chemistry Curriculum

    Science.gov (United States)

    Randall, David W.; Hayes, Ryan T.; Wong, Peter A.

    2013-01-01

    A LIBS (laser induced breakdown spectroscopy) spectrometer constructed by the instructor is reported for use in undergraduate analytical chemistry experiments. The modular spectrometer described here is based on commonly available components including a commercial Nd:YAG laser and a compact UV-vis spectrometer. The modular approach provides a…

  11. Temperature and Electron Density Determination on Laser-Induced Breakdown Spectroscopy (LIBS) Plasmas: A Physical Chemistry Experiment

    Science.gov (United States)

    Najarian, Maya L.; Chinni, Rosemarie C.

    2013-01-01

    This laboratory is designed for physical chemistry students to gain experience using laser-induced breakdown spectroscopy (LIBS) in understanding plasma diagnostics. LIBS uses a high-powered laser that is focused on the sample causing a plasma to form. The emission of this plasma is then spectrally resolved and detected. Temperature and electron…

  12. Laser-induced breakdown spectroscopy for the study of the pattern of silicon deposition in leaves of saccharum species

    NARCIS (Netherlands)

    Tripathi, D.K.; Kumar, R.; Chauhan, D.K.; Rai, A.K.; Bicanic, D.D.

    2011-01-01

    The spatial distribution pattern of silicon in the leaves of three species of Saccharum has been demonstrated by means of laser induced breakdown spectroscopy (LIBS). The in-situ point detection capability of LIBS was used to determine different elements in leaf samples. The concentrations of

  13. Effect of sample preparation on the discrimination of bacterial isolates cultured in liquid nutrient media using laser induced breakdown spectroscopy

    Science.gov (United States)

    Laser induced breakdown spectroscopy (LIBS) is used as the basis for discrimination between 2 genera of gram-negative bacteria and 2 genera of gram-positive bacteria representing pathogenic threats commonly found in poultry processing rinse waters. Because LIBS-based discrimination relies primarily ...

  14. Temperature and Electron Density Determination on Laser-Induced Breakdown Spectroscopy (LIBS) Plasmas: A Physical Chemistry Experiment

    Science.gov (United States)

    Najarian, Maya L.; Chinni, Rosemarie C.

    2013-01-01

    This laboratory is designed for physical chemistry students to gain experience using laser-induced breakdown spectroscopy (LIBS) in understanding plasma diagnostics. LIBS uses a high-powered laser that is focused on the sample causing a plasma to form. The emission of this plasma is then spectrally resolved and detected. Temperature and electron…

  15. Novel estimation of the humification degree of soil organic matter by laser-induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Edilene Cristina, E-mail: edilene@iq.unesp.br [Embrapa Instrumentation, Rua XV de Novembro, 1452, CEP 13560-970 São Carlos, SP (Brazil); São Paulo State University—UNESP, Analytical Chemistry Department, P.O. Box 355, 14801-970 Rua Prof. Francisco Degni, 55, CEP 14800-900 Araraquara, SP (Brazil); Ferreira, Ednaldo José, E-mail: ednaldo.ferreira@embrapa.br [Embrapa Instrumentation, Rua XV de Novembro, 1452, CEP 13560-970 São Carlos, SP (Brazil); Villas-Boas, Paulino Ribeiro, E-mail: paulino.villas-boas@embrapa.br [Embrapa Instrumentation, Rua XV de Novembro, 1452, CEP 13560-970 São Carlos, SP (Brazil); Senesi, Giorgio Saverio, E-mail: giorgio.senesi@ba.imip.cnr.it [Institute of Inorganic Methodologies and Plasmas, CNR, Bari 70126 (Italy); Carvalho, Camila Miranda, E-mail: camilamc@gmail.com [Embrapa Instrumentation, Rua XV de Novembro, 1452, CEP 13560-970 São Carlos, SP (Brazil); Physics Institute of São Carlos, University of São Paulo, IFSC-USP, Av. Trabalhador são-carlense, 400 Pq. Arnold Schimid, 13566-590 São Carlos, SP (Brazil); Romano, Renan Arnon, E-mail: renan.romano@gmail.com [Embrapa Instrumentation, Rua XV de Novembro, 1452, CEP 13560-970 São Carlos, SP (Brazil); Physics Institute of São Carlos, University of São Paulo, IFSC-USP, Av. Trabalhador são-carlense, 400 Pq. Arnold Schimid, 13566-590 São Carlos, SP (Brazil); Martin-Neto, Ladislau, E-mail: ladislau.martin@embrapa.br [Embrapa Instrumentation, Rua XV de Novembro, 1452, CEP 13560-970 São Carlos, SP (Brazil); and others

    2014-09-01

    Soil organic matter (SOM) constitutes an important reservoir of terrestrial carbon and can be considered an alternative for atmospheric carbon storage, contributing to global warming mitigation. Soil management can favor atmospheric carbon incorporation into SOM or its release from SOM to atmosphere. Thus, the evaluation of the humification degree (HD), which is an indication of the recalcitrance of SOM, can provide an estimation of the capacity of carbon sequestration by soils under various managements. The HD of SOM can be estimated by using various analytical techniques including fluorescence spectroscopy. In the present work, the potential of laser-induced breakdown spectroscopy (LIBS) to estimate the HD of SOM was evaluated for the first time. Intensities of emission lines of Al, Mg and Ca from LIBS spectra showing correlation with fluorescence emissions determined by laser-induced fluorescence spectroscopy (LIFS) reference technique were used to obtain a multivaried calibration model based on the k-nearest neighbor (k-NN) method. The values predicted by the proposed model (A-LIBS) showed strong correlation with LIFS results with a Pearson's coefficient of 0.87. The HD of SOM obtained after normalizing A-LIBS by total carbon in the sample showed a strong correlation to that determined by LIFS (0.94), thus suggesting the great potential of LIBS for this novel application. - Highlights: • Humification degree of soil organic matter (HD) • Importance of soil organic matter HD in keeping carbon in soil • Laser induced fluorescence spectroscopy (LIFS) for HD estimation (reference method) • New LIBS application to predict HD.

  16. Spectral Analysis of Rare Earth Elements using Laser-Induced Breakdown Spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Martin, Madhavi Z [ORNL; Fox, Dr. Richard V [Idaho National Laboratory (INL); Miziolek, Andrzej W [United States Army Research Laboratory; DeLucia, Frank C [United States Army Research Laboratory; Andre, Nicolas O [ORNL

    2015-01-01

    There is growing interest in rapid analysis of rare earth elements (REEs) both due to the need to find new natural sources to satisfy increased demand in their use in various electronic devices, as well as the fact that they are used to estimate actinide masses for nuclear safeguards and nonproliferation. Laser-Induced Breakdown Spectroscopy (LIBS) appears to be a particularly well-suited spectroscopy-based technology to rapidly and accurately analyze the REEs in various matrices at low concentration levels (parts-per-million). Although LIBS spectra of REEs have been reported for a number of years, further work is still necessary in order to be able to quantify the concentrations of various REEs in real-world complex samples. LIBS offers advantages over conventional solution-based radiochemistry in terms of cost, analytical turnaround, waste generation, personnel dose, and contamination risk. Rare earth elements of commercial interest are found in the following three matrix groups: 1) raw ores and unrefined materials, 2) as components in refined products such as magnets, lighting phosphors, consumer electronics (which are mostly magnets and phosphors), catalysts, batteries, etc., and 3) waste/recyclable materials (aka e-waste). LIBS spectra for REEs such as Gd, Nd, and Sm found in rare earth magnets are presented.

  17. Spectral Analysis of Rare Earth Elements using Laser-Induced Breakdown Spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Martin, Madhavi Z [ORNL; Fox, Dr. Richard V [Idaho National Laboratory (INL); Miziolek, Andrzej W [United States Army Research Laboratory; DeLucia, Frank C [United States Army Research Laboratory; Andre, Nicolas O [ORNL

    2015-01-01

    There is growing interest in rapid analysis of rare earth elements (REEs) both due to the need to find new natural sources to satisfy increased demand in their use in various electronic devices, as well as the fact that they are used to estimate actinide masses for nuclear safeguards and nonproliferation. Laser-Induced Breakdown Spectroscopy (LIBS) appears to be a particularly well-suited spectroscopy-based technology to rapidly and accurately analyze the REEs in various matrices at low concentration levels (parts-per-million). Although LIBS spectra of REEs have been reported for a number of years, further work is still necessary in order to be able to quantify the concentrations of various REEs in realworld complex samples. LIBS offers advantages over conventional solution-based radiochemistry in terms of cost, analytical turnaround, waste generation, personnel dose, and contamination risk. Rare earth elements of commercial interest are found in the following three matrix groups: 1) raw ores and unrefined materials, 2) as components in refined products such as magnets, lighting phosphors, consumer electronics (which are mostly magnets and phosphors), catalysts, batteries, etc., and 3) waste/recyclable materials (aka e-waste). LIBS spectra for REEs such as Gd, Nd, and Sm found in rare earth magnets are presented.

  18. X-Ray Fluorescence and Laser-Induced Breakdown Spectroscopy analysis of Roman silver denarii

    Energy Technology Data Exchange (ETDEWEB)

    Pardini, L. [Istituto di Chimica dei Composti Organometallici del CNR, Research Area of Pisa, Via G. Moruzzi 1, 56124 Pisa (Italy); El Hassan, A. [National Institute for Laser- Enhanced Sciences (NILES), Cairo University Giza (Egypt); Ferretti, M. [Istituto per le Tecnologie Applicate ai Beni Culturali, Area della Ricerca del CNR di Montelibretti Roma (Italy); Foresta, A.; Legnaioli, S.; Lorenzetti, G. [Istituto di Chimica dei Composti Organometallici del CNR, Research Area of Pisa, Via G. Moruzzi 1, 56124 Pisa (Italy); Nebbia, E. [Universita degli Studi di Torino (Italy); Catalli, F. [Monetiere di Firenze, Museo Archeologico Nazionale Firenze (Italy); Harith, M.A. [National Institute for Laser- Enhanced Sciences (NILES), Cairo University Giza (Egypt); Diaz Pace, D. [Institute of Physics ' Arroyo Seco' , Faculty of Science, Tandil (Argentina); Anabitarte Garcia, F. [Photonics Engineering Group, University of Cantabria, Santander (Spain); Scuotto, M. [Dipartimento di Scienze Archeologiche, Via Galvani 1, 56126 Pisa (Italy); Palleschi, V., E-mail: vincenzo.palleschi@cnr.it [Istituto di Chimica dei Composti Organometallici del CNR, Research Area of Pisa, Via G. Moruzzi 1, 56124 Pisa (Italy); Dipartimento di Scienze Archeologiche, Via Galvani 1, 56126 Pisa (Italy)

    2012-08-15

    In this paper we present the results of a study performed on a large collection of silver Roman republican denarii, encompassing about two centuries of history. The joint use of Laser-Induced Breakdown Spectroscopy (LIBS) and X-Ray Fluorescence (XRF) spectroscopy allowed for an accurate determination of the coins' elemental composition; the measurements, performed mostly in situ at the 'Monetiere' in Florence, revealed a striking connection between the 'quality' of the silver alloy and some crucial contemporary events. This finding was used to classify a group of denarii whose dating was otherwise impossible. The comparison with other contemporary denarii disproves a recent theory on the origin of the so called 'serrated' denarii (denarii showing notched chisel marks on the edge of the coin). - Highlights: Black-Right-Pointing-Pointer We studied a large collection of Roman republican silver denarii. Black-Right-Pointing-Pointer XRF and LIBS allowed to determine the precious metal content of the coins. Black-Right-Pointing-Pointer A correlation of the 'quality' of the alloy with some contemporary events was found. Black-Right-Pointing-Pointer The study allowed to controvert a recent theory on the so called 'serrated' denarii.

  19. Spectral Analysis of Rare Earth Elements using Laser-Induced Breakdown Spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Madhavi Z. Martin; Robert V. Fox; Andrzej W. Miziolek; Frank C. DeLucia, Jr.; Nicolas Andre

    2001-05-01

    There is growing interest in rapid analysis of rare earth elements (REEs) both due to the need to find new natural sources to satisfy increased demand in their use in various electronic devices, as well as the fact that they are used to estimate actinide masses for nuclear safeguards and nonproliferation. Laser-Induced Breakdown Spectroscopy (LIBS) appears to be a particularly well-suited spectroscopy-based technology to rapidly and accurately analyze the REEs in various matrices at low concentration levels (parts-per-million). Although LIBS spectra of REEs have been reported for a number of years, further work is still necessary in order to be able to quantify the concentrations of various REEs in realworld complex samples. LIBS offers advantages over conventional solution-based radiochemistry in terms of cost, analytical turnaround, waste generation, personnel dose, and contamination risk. Rare earth elements of commercial interest are found in the following three matrix groups: 1) raw ores and unrefined materials, 2) as components in refined products such as magnets, lighting phosphors, consumer electronics (which are mostly magnets and phosphors), catalysts, batteries, etc., and 3) waste/recyclable materials (aka e-waste). LIBS spectra for REEs such as Gd, Nd, and Sm found in rare earth magnets are presented.

  20. Potential of Laser Induced Breakdown Spectroscopy for analyzing the quality of unroasted and ground coffee

    Science.gov (United States)

    Silva, Tiago Varão; Hubinger, Silviane Zanni; Gomes Neto, José Anchieta; Milori, Débora Marcondes Bastos Pereira; Ferreira, Ednaldo José; Ferreira, Edilene Cristina

    2017-09-01

    Coffee is an important commodity and a very popular beverage around the world. Its economic value as well as beverage quality are strongly dependent of the quality of beans. The presence of defective beans in coffee blends has caused a negative impact on the beverage Global Quality (GQ) assessed by cupping tests. The main defective beans observed in the productive chain has been those Blacks, Greens and Sours (BGS). Chemical composition of BGS has a damaging impact on beverage GQ. That is why analytical tools are needed for monitoring and controlling the GQ in coffee agro-industry. Near Infrared Spectroscopy (NIRS) has been successfully applied for assessment of coffee quality. Another potential technique for direct, clean and fast measurement of coffee GQ is Laser Induced Breakdown Spectroscopy (LIBS). Elements and diatomic molecules commonly present in organic compounds (structure) can be assessed by using LIBS. In this article is reported an evaluation of LIBS for the main interferents of GQ (BGS defects). Results confirm the great potential of LIBS for discriminating good beans from those with BGS defects by using emission lines of C, CN, C2 and N. Most importantly, some emission lines presented strong linear correlation (r > 0.9) with NIRS absorption bands assigned to proteins, lipids, sugar and carboxylic acids, suggesting LIBS potential to estimate these compounds in unroasted and ground coffee samples.

  1. Rapid Detection of Oil Pollution in Soil by Using Laser-Induced Breakdown Spectroscopy

    Science.gov (United States)

    Ali, Khumaeni; Wahyu Setia, Budi; Asep Yoyo, Wardaya; Rinda, Hedwig; Koo Hendrik, Kurniawan

    2016-12-01

    Detection of oil pollution in soil has been carried out using laser-induced breakdown spectroscopy (LIBS). A pulsed neodymium-doped yttrium aluminum garnet (Nd:YAG) laser (1,064 nm, 8 ns, 200 mJ) was focused onto pelletized soil samples. Emission spectra were obtained from oil-contaminated soil and clean soil. The contaminated soil had almost the same spectrum profile as the clean soil and contained the same major and minor elements. However, a C-H molecular band was clearly detected in the oil-contaminated soil, while no C-H band was detected in the clean soil. Linear calibration curve of the C-H molecular band was successfully made by using a soil sample containing various concentrations of oil. The limit of detection of the C-H band in the soil sample was 0.001 mL/g. Furthermore, the emission spectrum of the contaminated soil clearly displayed titanium (Ti) lines, which were not detected in the clean soil. The existence of the C-H band and Ti lines in oil-contaminated soil can be used to clearly distinguish contaminated soil from clean soil. For comparison, the emission spectra of contaminated and clean soil were also obtained using scanning electron microscope-energy dispersive X-ray (SEM/EDX) spectroscopy, showing that the spectra obtained using LIBS are much better than using SEM/EDX, as indicated by the signal to noise ratio (S/N ratio).

  2. Spectrochemical analysis of Cs in water and soil using low pressure laser induced breakdown spectroscopy

    Science.gov (United States)

    Ramli, Muliadi; Khumaeni, Ali; Kurniawan, Koo Hendrik; Tjia, May On; Kagawa, Kiichiro

    2017-06-01

    An experimental study has been conducted for the practical and in situ application of laser-induced breakdown spectroscopy (LIBS) for the detection of Cs pollutant in water and soil in the nearby area of Fukushima Nuclear Power Station. The spectrochemical measurements were carried out by means of 355 nm Nd-YAG laser with N2 and He ambient gases at atmospheric and low pressures. The soil samples were prepared by pelletizing the mixtures of 80% soil and 20% KBr while the aqueous samples were prepared as thin films electro deposited on indium tin oxide (ITO) glass. The resulted emission spectra using 0.5 kPa N2 ambient gas shows the minimum detectable Cs concentration of 0.2 ppm and 0.3 ppm in the water and soil samples, respectively. The result of this experiment has thus demonstrated the viability of the LIBS equipment employed here as a more practical, in-situ and even mobile alternative to the standard use of gamma-ray spectroscopy using germanium detector.

  3. Laser Induced Breakdown Spectroscopy in archeometry: A review of its application and future perspectives

    Energy Technology Data Exchange (ETDEWEB)

    Spizzichino, Valeria, E-mail: valeria.spizzichino@enea.it; Fantoni, Roberta

    2014-09-01

    Laser Induced Breakdown Spectroscopy (LIBS) in the last decades has been more and more applied to the field of Cultural Heritage with great results obtained either alone or in combination with complementary laser techniques. Its ability to analyze, with a minimal loss, different kinds of materials in laboratory, in situ and even in hostile environments has been highly appreciated. The main aim of this paper is to present a review of LIBS applications in the interdisciplinary field of archeometry. The LIBS technique is shortly described both from a theoretical and practical point of view, discussing the instrumental setup, also in comparison with typical features of laser induced fluorescence (LIF) and Raman spectroscopy apparata. The complementary with multivariate analysis, a method that can help in reducing data set dimensions and in pulling out effective information, is stressed. In particular the role of LIBS in Cultural Heritage material characterization, recognition of fakes and indirect dating is described, reporting general considerations and case studies on metal alloys, mural paintings, decorated ceramics, glasses, stones and gems. - Highlights: • Applications of LIBS to archeometry are reviewed. • Complementary among LIBS, LIF, Raman and multivariate analysis is highlighted. • Three major areas of successful LIBS application in archeometry are identified. • Significant results have been presented for several different materials.

  4. Evaluation of laser induced breakdown spectroscopy for multielemental determination in soils under sewage sludge application.

    Science.gov (United States)

    Ferreira, Edilene Cristina; Milori, Débora Marcondes Bastos Pereira; Ferreira, Ednaldo José; Dos Santos, Larissa Macedo; Martin-Neto, Ladislau; Nogueira, Ana Rita de Araújo

    2011-07-15

    Laser induced breakdown spectroscopy (LIBS) is an atomic emission spectroscopy technique for simple, direct and clean analysis, with great application potential in environmental sustainability studies. In a single LIBS spectrum it is possible to obtain qualitative information on the sample composition. However, quantitative analysis requires a reliable model for analytical calibration. Multilayer perceptron (MLP), an artificial neural network, is a multivariate technique that is capable of learning to recognize features from examples. Therefore MLP can be used as a calibration model for analytical determinations. Accordingly, the present study proposes to evaluate the traditional linear fit and MLP models for LIBS calibration, in order to attain a quantitative multielemental method for contaminant determination in soil under sewage sludge application. Two sets of samples, both composed of two kinds of soils were used for calibration and validation, respectively. The analyte concentrations in these samples, used as reference, were determined by a reference analytical method using inductively coupled plasma optical emission spectrometry (ICP OES). The LIBS-MLP was compared to a LIBS-linear fit method. The values determined by LIBS-MLP showed lower prediction errors, correlation above 98% with values determined by ICP OES, higher accuracy and precision, lower limits of detection and great application potential in the analysis of different kinds of soils. Copyright © 2011 Elsevier B.V. All rights reserved.

  5. Laser-induced breakdown spectroscopy: a new approach for nanoparticle's mapping and quantification in organ tissue.

    Science.gov (United States)

    Sancey, Lucie; Motto-Ros, Vincent; Kotb, Shady; Wang, Xiaochun; Lux, François; Panczer, Gérard; Yu, Jin; Tillement, Olivier

    2014-06-18

    Emission spectroscopy of laser-induced plasma was applied to elemental analysis of biological samples. Laser-induced breakdown spectroscopy (LIBS) performed on thin sections of rodent tissues: kidneys and tumor, allows the detection of inorganic elements such as (i) Na, Ca, Cu, Mg, P, and Fe, naturally present in the body and (ii) Si and Gd, detected after the injection of gadolinium-based nanoparticles. The animals were euthanized 1 to 24 hr after intravenous injection of particles. A two-dimensional scan of the sample, performed using a motorized micrometric 3D-stage, allowed the infrared laser beam exploring the surface with a lateral resolution less than 100 μm. Quantitative chemical images of Gd element inside the organ were obtained with sub-mM sensitivity. LIBS offers a simple and robust method to study the distribution of inorganic materials without any specific labeling. Moreover, the compatibility of the setup with standard optical microscopy emphasizes its potential to provide multiple images of the same biological tissue with different types of response: elemental, molecular, or cellular.

  6. Emission enhancement using two orthogonal targets in double pulse laser-induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez-Ake, C. [Laboratorio de Fotofisica, Centro de Ciencias Aplicadas y Desarrollo Tecnologico, Universidad Nacional Autonoma de Mexico, Apartado Postal 70-186, Mexico D.F., C.P. 04510 (Mexico)], E-mail: citlali.sanchez@ccadet.unam.mx; Bolanos, Marduk [Laboratorio de Fotofisica, Centro de Ciencias Aplicadas y Desarrollo Tecnologico, Universidad Nacional Autonoma de Mexico, Apartado Postal 70-186, Mexico D.F., C.P. 04510 (Mexico); Ramirez, C.Z. [Colegio de Ciencias y Humanidades Plantel Sur, Universidad Nacional Autonoma de Mexico (Mexico)

    2009-09-15

    The enhancement of emission intensity resulting from the interaction between two laser-induced plasmas on two orthogonal targets was investigated using double pulse laser-induced breakdown spectroscopy (LIBS) at 0.7 Pa, by means of time-resolved spectroscopy and fast photography. The results showed that the interaction between both plasmas improved carbon emission intensity in comparison to a single laser-induced plasma. For all the carbon lines of interest 477.2 nm (CI), 426.7 nm (CII), and 473.4 nm (C{sub 2} Swan band head), the intensity enhancement showed a maximum at a delay between lasers in the range from 2 to 5 {mu}s; moreover it increased with the fluence of the first laser. On the other hand, in the case of C{sub 2} the intensity enhancement reached a maximum at 5 mm from the target; however it decreased with increasing fluence of the second laser. The largest intensity enhancement found was twofold for atomic species and sixfold for molecular species.

  7. Real-time specific surface area measurements via laser-induced breakdown spectroscopy

    Science.gov (United States)

    Washburn, Kathryn E.; Birdwell, Justin E.; Howard, James E.

    2017-01-01

    From healthcare to cosmetics to environmental science, the specific surface area (SSA) of micro- and mesoporous materials or products can greatly affect their chemical and physical properties. SSA results are also widely used to examine source rocks in conventional and unconventional petroleum resource plays. Despite its importance, current methods to measure SSA are often cumbersome, time-consuming, or require cryogenic consumables (e.g., liquid nitrogen). These methods are not amenable to high-throughput environments, have stringent sample preparation requirements, and are not practical for use in the field. We present a new application of laser-induced breakdown spectroscopy for rapid measurement of SSA. This study evaluates geological samples, specifically organic-rich oil shales, but the approach is expected to be applicable to many other types of materials. The method uses optical emission spectroscopy to examine laser-generated plasma and quantify the amount of argon adsorbed to a sample during an inert gas purge. The technique can accommodate a wide range of sample sizes and geometries and has the potential for field use. These advantages for SSA measurement combined with the simultaneous acquisition of composition information make this a promising new approach for characterizing geologic samples and other materials.

  8. Characterization of alumina-based ceramic nanocomposites by laser-induced breakdown spectroscopy

    Science.gov (United States)

    Ahmad, Kaleem; Al-Eshaikh, Mohammad A.; Kadachi, Ahmed N.

    2015-06-01

    Alumina-based hybrids containing different concentrations of carbon nanostructure and SiC nanoparticles were consolidated by the spark plasma sintering in order to obtain fully dense bulk ceramic nanocomposites. Laser-induced breakdown spectroscopy was employed to determine relationship between plasma temperature and surface hardness of the composites. The characteristic parameters of plasma generated by irradiation of laser Nd:YAG ( λ = 1064 nm) on different bulk nanocomposites were determined at different delay times and energies by assuming the LTE condition for optically thin plasma. The plasma temperatures were estimated through intensity of selected aluminum emission lines using the Boltzmann plot method. The electron density was determined using the Stark broadening of selected aluminum and silicon emission lines. The samples were mechanically characterized by the Vickers hardness test. It has been observed that the plasma temperature increases with the increase in hardness and shows a perfect linear relationship. The results suggest that calibration curve between hardness and the plasma temperature can be employed as an alternate method to estimate the hardness of nanocomposite with varying concentrations of nanostructures just by measuring the plasma temperature with better reproducibility and accuracy. Therefore, laser-induced break down spectroscopy (LIBS) offers potential applications in nuclear industry.

  9. Laser Induced Breakdown Spectroscopy in archeometry: A review of its application and future perspectives

    Science.gov (United States)

    Spizzichino, Valeria; Fantoni, Roberta

    2014-09-01

    Laser Induced Breakdown Spectroscopy (LIBS) in the last decades has been more and more applied to the field of Cultural Heritage with great results obtained either alone or in combination with complementary laser techniques. Its ability to analyze, with a minimal loss, different kinds of materials in laboratory, in situ and even in hostile environments has been highly appreciated. The main aim of this paper is to present a review of LIBS applications in the interdisciplinary field of archeometry. The LIBS technique is shortly described both from a theoretical and practical point of view, discussing the instrumental setup, also in comparison with typical features of laser induced fluorescence (LIF) and Raman spectroscopy apparata. The complementary with multivariate analysis, a method that can help in reducing data set dimensions and in pulling out effective information, is stressed. In particular the role of LIBS in Cultural Heritage material characterization, recognition of fakes and indirect dating is described, reporting general considerations and case studies on metal alloys, mural paintings, decorated ceramics, glasses, stones and gems.

  10. Comparative investigation of laser-induced breakdown spectroscopy in bulk water using 532- and 1064-nm lasers

    Science.gov (United States)

    Tian, Ye; Xue, Boyang; Song, Jiaojian; Lu, Yuan; Li, Ying; Zheng, Ronger

    2017-07-01

    The influence of laser wavelength on the characteristics of laser-induced breakdown spectroscopy (LIBS) in bulk water was investigated by using 532- and 1064-nm lasers. We demonstrated that higher laser energy does not lead to higher LIBS signals because of the strong plasma shielding occurring at high laser energies, as shown by the spectroscopic and fast imaging results in this work. At threshold energies of 100% breakdown probability, the 1064 nm beam could induce a plasma with higher electron density and temperature than the 532 nm beam, which leads to higher signal-to-noise ratios and longer lifetimes of the emission lines.

  11. Monitoring and assessment of toxic metals in Gulf War oil spill contaminated soil using laser-induced breakdown spectroscopy.

    Science.gov (United States)

    Hussain, T; Gondal, M A

    2008-01-01

    Laser-induced breakdown spectroscopy (LIBS) was applied for the detection of toxic metals in oil spill contaminated soil (OSCS). The OSCS samples were collected from Khursania Saudi Arabia along the coast of Persian Gulf exposed to oil spills in 1991 Gulf war. Environmentally important elements like Aluminum Magnesium, Calcium, Chromium, Titanium, Strontium, Iron, Barium, Sodium, potassium, Zirconium and Vanadium from the contaminated soil have been detected. Optimal experimental conditions for analysis were investigated. The LIBS system was calibrated using standard samples containing these trace elements. The results obtained using Laser-Induced Breakdown Spectroscopy (LIBS) were compared with the results obtained using Inductively Coupled Plasma Emission Spectroscopy (ICP). The concentrations of some elements (Ba and Cr) were found higher than permissible safe limits. Health risks associated with exposure to such toxic elements are also discussed.

  12. Laser-induced breakdown spectroscopy application to control of the process of precious metal recovery and recycling

    Science.gov (United States)

    Legnaioli, S.; Lorenzetti, G.; Pardini, L.; Palleschi, V.; Pace, D. M. Diaz; Garcia, F. Anabitarte; Grassi, R.; Sorrentino, F.; Carelli, G.; Francesconi, M.; Francesconi, F.; Borgogni, R.

    2012-05-01

    In this paper, we discuss the application of laser-induced breakdown spectroscopy to precious metal alloys used for the control of the process of recovery and recycling of scraps and waste of industrial processes. In particular, the possibility to obtain sensitivity and trueness comparable to the current systems used in industrial environment in the quantitative determination of the elements of interest was explored. The present study demonstrates that laser-induced breakdown spectroscopy can be considered as a viable alternative to inductively coupled plasma optical emission spectrometry and X-ray fluorescence spectroscopy for the determination of recovered precious metals. The limits of detection obtained are of the order of 0.2 mg/g for all the elements considered. The maximum deviation with respect to the nominal concentrations is around 1 mg/g at concentrations around 20 mg/g (gold) corresponding to a relative error slightly higher than ± 5%.

  13. Laser induced spectroscopy breakdown (LIBS) application to heavy metal detection in soils; Applicazioni della tecnica Laser induced breakdown spectroscopy (LIBS) alla determinazione dei metalli pesanti nei suoli

    Energy Technology Data Exchange (ETDEWEB)

    Barbini, R.; Fantoni, R.; Palucci, A.; Ribezzo, S.; Colao, F. [ENEA, Centro Ricerche Frascati, Frascati, RM (Italy). Div. Fisica Applicata; Capitelli, F. [Bari, Univ., Bari (Italy). Dipt. di Biologia e Chimica Agroforestale ed Ambientale

    2000-07-01

    LIBS (Laser induced breakdown spectroscopy) is a new spectroscopic technique suitable to the use in the analysis of samples of environmental interest, such as soils and rocks, and of industrial interest, such as alloys. Results dealing with the application of the technique to heterogeneous soil samples certified by Ispra Joint Research Centre in the contest of heavy metals (Cd, Cr, Cu, Fe, Mn, Ni, Pb, Zn) with an agronomical interest are presented in this report. In the LIBS technique, a high power laser beam is focused onto the sample in order to generate a small volume of plasma at its surface. Emissions from single atomic species are collected by a lens system coupled to an optical fiber bundle, dispersed on a monochromator and analyzed by an iCCD. the identification and the assignment of emission lines relevant to single atomic species allows to determine the sample elemental composition and, after calibration against reference samples, to perform quantitative analysis for a large number of species. This technique requires no sample pre-treatment, a part from eventually compacting powders by mechanical press. This is a considerable advantage with respect to traditional spectroscopic techniques, such as the ICP (Inductively Coupled Plasma) which needs sample mineralization by acid attack. Measurements performed on soil samples by means of the LIBS technique at ENEA Frascati were compared with the results obtained by ICP, which is considered a traditional technique for this kind of analysis. Results showed a general overestimation of the LIBS values with respect to the ICP ones, probably due to differences in lytologic matrix between the analyzed samples and the standard. The phenomenon is usually referred to the matrix effect, which is held responsible for the deviation from linearity between single element concentration and its row intensity. The effect is due to local plasma density variations and limit the correlation between the plasma elemental composition

  14. Laser-Induced Breakdown Spectroscopy in open-path configuration for the analysis of distant objects

    Science.gov (United States)

    Sallé, B.; Mauchien, P.; Maurice, S.

    2007-08-01

    A review of recent results on stand-off Laser-Induced Breakdown Spectroscopy (LIBS) analysis and applications is presented. Stand-off LIBS was suggested for elemental analysis of materials located in environments where any physical access was not possible but optical access could be envisaged. This review only refers to the use of the open-path LIBS configuration in which the laser beam and the returning plasma light are transmitted through the atmosphere. It does not present the results obtained with a transportation of the laser pulses to the target through an optical fiber. Open-path stand-off LIBS has mainly been used with nanosecond laser pulses for solid sample analysis at distances of tens of meters. Liquid samples have also been analyzed at distances of a few meters. The distances achievable depend on many parameters including the laser characteristics (pulse energy and power, beam divergence, spatial profile) and the optical system used to focus the pulses at a distance. A large variety of laser focusing systems have been employed for stand-off analysis comprising refracting or reflecting telescope. Efficient collection of the plasma light is also needed to obtain analytically useful signals. For stand-off LIBS analysis, a lens or a mirror is required to increase the solid angle over which the plasma light can be collected. The light collection device can be either at an angle from the laser beam path or collinear with the optical axis of the system used to focus the laser pulses on the target surface. These different configurations have been used depending on the application such as rapid sorting of metal samples, identification of material in nuclear industry, process control and monitoring in metallurgical industry, applications in future planetary missions, detection of environmental contamination or cleaning of objects of cultural heritage. Recent stand-off analyses of metal samples have been reported using femtosecond laser pulses to extend LIBS

  15. A comparison of push and pull production controls under machine breakdown

    Directory of Open Access Journals (Sweden)

    Prakash, J.

    2011-01-01

    Full Text Available Production control for high-mix production remains a complex issue. Common pull system replenishment generates large works-in-process (WIPs for each part type, especially under breakdown. This paper attempts to solve this by presenting a production control that classifies parts into two categories. The performances of three production control mechanisms under breakdown are compared. The production control mechanisms in consideration are push, shared constant WIP (CONWIP, and parallel CONWIP. A full-factorial simulation experiment was conducted. ANOVA was performed to determine the significant effects of input factors. Response surface methodology was used to demonstrate the behavior of performance measures in terms of these significant input factors. The results prove that parallel CONWIP is superior over shared CONWIP in terms of the average flow time per part. If categorical dispatch rules are employed, parallel CONWIP outperforms shared CONWIP in terms of service level. With high card count, parallel CONWIP generally produces lower bottleneck utilizations while maintaining a low average flow time per part than shared CONWIP.

  16. Application of laser-induced breakdown spectroscopy in carbon sequestration research and development

    Indian Academy of Sciences (India)

    Jinesh Jain; Dustin Mcintyre; Krishna Ayyalasomayajula; Vivek Dikshit; Christian Goueguel; F Yu-Yueh; Jagdish Singh

    2014-08-01

    The success of carbon capture and storage (CCS) programme relies on the long-term isolation of CO2 from the atmosphere. Therefore, technologies concomitant to physical storage of CO2 such as reliable measurement, monitoring, and verification (MMV) techniques are needed to ensure that the integrity of the storage site is maintained. We propose the use of laser-induced breakdown spectroscopy (LIBS) analytical technique to detect carbon dioxide leaks to aid in the successful application of CCS. LIBS has a real-time monitoring capability and can be reliably used for the elemental and isotopic analysis of solid, liquid, and gas samples. The flexibility of probe design and use of fibre optics make it a suitable technique for real-time measurements in harsh conditions and at hard-to-reach places. Proposed monitoring with LIBS includes terrestrial soil samples, water samples from monitoring wells or from different formations, air samples from monitoring wells or suspected leakage areas. This work details the laboratory scale experiments to measure carbon contents in soil, aqueous, and air samples. The potential of the technology for measurements in high-pressure, high-temperature conditions has been discussed.

  17. Understanding the signature of rock coatings in laser-induced breakdown spectroscopy data

    Science.gov (United States)

    Lanza, Nina L.; Ollila, Ann M.; Cousin, Agnes; Wiens, Roger C.; Clegg, Samuel M.; Mangold, Nicolas; Bridges, Nathan; Cooper, Daniel; Schmidt, Mariek E.; Berger, Jeffrey; Arvidson, Raymond E.; Melikechi, Noureddine; Newsom, Horton E.; Tokar, Robert; Hardgrove, Craig; Mezzacappa, Alissa; Jackson, Ryan S.; Clark, Benton C.; Forni, Olivier; Maurice, Sylvestre; Nachon, Marion; Anderson, Ryan B.; Blank, Jennifer; Deans, Matthew; Delapp, Dorothea; Léveillé, Richard; McInroy, Rhonda; Martinez, Ronald; Meslin, Pierre-Yves; Pinet, Patrick

    2015-01-01

    Surface compositional features on rocks such as coatings and weathering rinds provide important information about past aqueous environments and water–rock interactions. The search for these features represents an important aspect of the Curiosity rover mission. With its unique ability to do fine-scale chemical depth profiling, the ChemCam laser-induced breakdown spectroscopy instrument (LIBS) onboard Curiosity can be used to both identify and analyze rock surface alteration features. In this study we analyze a terrestrial manganese-rich rock varnish coating on a basalt rock in the laboratory with the ChemCam engineering model to determine the LIBS signature of a natural rock coating. Results show that there is a systematic decrease in peak heights for elements such as Mn that are abundant in the coating but not the rock. There is significant spatial variation in the relative abundance of coating elements detected by LIBS depending on where on the rock surface sampled; this is due to the variability in thickness and spatial discontinuities in the coating. Similar trends have been identified in some martian rock targets in ChemCam data, suggesting that these rocks may have coatings or weathering rinds on their surfaces.

  18. Study on Cluster Analysis Used with Laser-Induced Breakdown Spectroscopy

    Science.gov (United States)

    He, Li'ao; Wang, Qianqian; Zhao, Yu; Liu, Li; Peng, Zhong

    2016-06-01

    Supervised learning methods (eg. PLS-DA, SVM, etc.) have been widely used with laser-induced breakdown spectroscopy (LIBS) to classify materials; however, it may induce a low correct classification rate if a test sample type is not included in the training dataset. Unsupervised cluster analysis methods (hierarchical clustering analysis, K-means clustering analysis, and iterative self-organizing data analysis technique) are investigated in plastics classification based on the line intensities of LIBS emission in this paper. The results of hierarchical clustering analysis using four different similarity measuring methods (single linkage, complete linkage, unweighted pair-group average, and weighted pair-group average) are compared. In K-means clustering analysis, four kinds of choosing initial centers methods are applied in our case and their results are compared. The classification results of hierarchical clustering analysis, K-means clustering analysis, and ISODATA are analyzed. The experiment results demonstrated cluster analysis methods can be applied to plastics discrimination with LIBS. supported by Beijing Natural Science Foundation of China (No. 4132063)

  19. Multi-elemental imaging of paraffin-embedded human samples by laser-induced breakdown spectroscopy

    Science.gov (United States)

    Moncayo, S.; Trichard, F.; Busser, B.; Sabatier-Vincent, M.; Pelascini, F.; Pinel, N.; Templier, I.; Charles, J.; Sancey, L.; Motto-Ros, V.

    2017-07-01

    Chemical elements play central roles for physiological homeostasis in human cells, and their dysregulation might lead to a certain number of pathologies. Novel imaging techniques that improve the work of pathologists for tissue analysis and diagnostics are continuously sought. We report the use of Laser-Induced Breakdown Spectroscopy (LIBS) to perform multi-elemental images of human paraffin-embedded skin samples on the entire biopsy scale in a complementary and compatible way with microscope histopathological examination. A specific instrumental configuration is proposed in order to detect most of the elements of medical interest (i.e. P, Al, Mg, Na, Zn, Si, Fe, and Cu). As an example of medical application, we selected and analysed skin biopsies, including healthy skin tissue, cutaneous metastasis of melanoma, Merkel-cell carcinoma and squamous cell carcinoma. Clear distinctions in the distribution of chemical elements are observed from the different samples investigated. This study demonstrates the high complementarity of LIBS elemental imaging with conventional histopathology, opening new opportunities for any medical application involving metals.

  20. Comparison of brass alloys composition by laser-induced breakdown spectroscopy and self-organizing maps

    Energy Technology Data Exchange (ETDEWEB)

    Pagnotta, Stefano; Grifoni, Emanuela; Legnaioli, Stefano [Applied and Laser Spectroscopy Laboratory, ICCOM-CNR, Research Area of Pisa, Via G. Moruzzi 1, 56124 Pisa (Italy); Lezzerini, Marco [Department of Earth Sciences, University of Pisa, Via S. Maria 53, 56126 Pisa (Italy); Lorenzetti, Giulia [Applied and Laser Spectroscopy Laboratory, ICCOM-CNR, Research Area of Pisa, Via G. Moruzzi 1, 56124 Pisa (Italy); Palleschi, Vincenzo, E-mail: vincenzo.palleschi@cnr.it [Applied and Laser Spectroscopy Laboratory, ICCOM-CNR, Research Area of Pisa, Via G. Moruzzi 1, 56124 Pisa (Italy); Department of Civilizations and Forms of Knowledge, University of Pisa, Via L. Galvani 1, 56126 Pisa (Italy)

    2015-01-01

    In this paper we face the problem of assessing similarities in the composition of different metallic alloys, using the laser-induced breakdown spectroscopy technique. The possibility of determining the degree of similarity through the use of artificial neural networks and self-organizing maps is discussed. As an example, we present a case study involving the comparison of two historical brass samples, very similar in their composition. The results of the paper can be extended to many other situations, not necessarily associated with cultural heritage and archeological studies, where objects with similar composition have to be compared. - Highlights: • A method for assessing the similarity of materials analyzed by LIBS is proposed. • Two very similar fragments of historical brass were analyzed. • Using a simple artificial neural network the composition of the two alloys was determined. • The composition of the two brass alloys was the same within the experimental error. • Using self-organizing maps, the probability of the alloys to have the same composition was assessed.

  1. Laser Induced Breakdown Spectroscopy of meteorites as a probe of the early solar system

    Energy Technology Data Exchange (ETDEWEB)

    Dell' Aglio, M., E-mail: marcella.dellaglio@ba.imip.cnr.it [CNR-IMIP, Via Amendola 122/D, 70126 Bari (Italy); De Giacomo, A. [CNR-IMIP, Via Amendola 122/D, 70126 Bari (Italy); Chemistry Department, University of Bari, Via Orabona 4, 70126 Bari (Italy); Gaudiuso, R.; De Pascale, O. [CNR-IMIP, Via Amendola 122/D, 70126 Bari (Italy); Longo, S. [Chemistry Department, University of Bari, Via Orabona 4, 70126 Bari (Italy); INAF-Osservatorio Astrofisico di Arcetri, Largo Enrico Fermi 5, Firenze (Italy)

    2014-11-01

    This paper presents an evaluation of Laser Induced Breakdown Spectroscopy (LIBS) as a technique for gathering data relevant to Solar System geophysics. Two test cases were demonstrated: elemental analysis of chondrules in a chondrite meteorite, and space- resolved analysis of the interface between kamacite and taenite crystals in an octahedrite iron meteorite. In particular most major and minor elements (Fe, Mg, Si, Ti, Al, Cr, Mn, Ca, Fe, Ni, Co) in Sahara 98222 (chondrite) and its chondrules, as well as the profile of Ni content in Toluca (iron meteorite), were determined with the Calibration Free (CF) method. A special attention was devoted to exploring the possibilities offered by variants of the basic technique, such as the use of Fe I Boltzmann distribution as an intensity calibration method of the spectroscopic system, and the use of spatially resolved analysis. - Highlights: • LIBS of meteorites can supply data relevant to the early evolution of solar system. • CF-LIBS was applied to two different test cases. • Chemical identification of chondrules embedded in a chondrite meteorite • Experimental and theoretical profiles of Ni content in an iron meteorite.

  2. Quantitative analysis of lead in aqueous solutions by ultrasonic nebulizer assisted laser induced breakdown spectroscopy

    Science.gov (United States)

    Zhong, Shi-Lei; Lu, Yuan; Kong, Wei-Jin; Cheng, Kai; Zheng, Ronger

    2016-08-01

    In this study, an ultrasonic nebulizer unit was established to improve the quantitative analysis ability of laser-induced breakdown spectroscopy (LIBS) for liquid samples detection, using solutions of the heavy metal element Pb as an example. An analytical procedure was designed to guarantee the stability and repeatability of the LIBS signal. A series of experiments were carried out strictly according to the procedure. The experimental parameters were optimized based on studies of the pulse energy influence and temporal evolution of the emission features. The plasma temperature and electron density were calculated to confirm the LTE state of the plasma. Normalizing the intensities by background was demonstrated to be an appropriate method in this work. The linear range of this system for Pb analysis was confirmed over a concentration range of 0-4,150ppm by measuring 12 samples with different concentrations. The correlation coefficient of the fitted calibration curve was as high as 99.94% in the linear range, and the LOD of Pb was confirmed as 2.93ppm. Concentration prediction experiments were performed on a further six samples. The excellent quantitative ability of the system was demonstrated by comparison of the real and predicted concentrations of the samples. The lowest relative error was 0.043% and the highest was no more than 7.1%.

  3. Laser-induced breakdown spectroscopy measurements of uranium and thorium powders and uranium ore

    Energy Technology Data Exchange (ETDEWEB)

    Judge, Elizabeth J. [Chemistry Division, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Barefield, James E., E-mail: jbarefield@lanl.gov [Chemistry Division, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Berg, John M. [Manufacturing Engineering and Technology Division, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Clegg, Samuel M.; Havrilla, George J.; Montoya, Velma M.; Le, Loan A.; Lopez, Leon N. [Chemistry Division, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)

    2013-05-01

    Laser-induced breakdown spectroscopy (LIBS) was used to analyze depleted uranium and thorium oxide powders and uranium ore as a potential rapid in situ analysis technique in nuclear production facilities, environmental sampling, and in-field forensic applications. Material such as pressed pellets and metals, has been extensively studied using LIBS due to the high density of the material and more stable laser-induced plasma formation. Powders, on the other hand, are difficult to analyze using LIBS since ejection and removal of the powder occur in the laser interaction region. The capability of analyzing powders is important in allowing for rapid analysis of suspicious materials, environmental samples, or trace contamination on surfaces since it most closely represents field samples (soil, small particles, debris etc.). The rapid, in situ analysis of samples, including nuclear materials, also reduces costs in sample collection, transportation, sample preparation, and analysis time. Here we demonstrate the detection of actinides in oxide powders and within a uranium ore sample as both pressed pellets and powders on carbon adhesive discs for spectral comparison. The acquired LIBS spectra for both forms of the samples differ in overall intensity but yield a similar distribution of atomic emission spectral lines. - Highlights: • LIBS analysis of mixed actinide samples: depleted uranium oxide and thorium oxide • LIBS analysis of actinide samples in powder form on carbon adhesive discs • Detection of uranium in a complex matrix (uranium ore) as a precursor to analyzing uranium in environmental samples.

  4. Phase discrimination of uranium oxides using laser-induced breakdown spectroscopy

    Science.gov (United States)

    Campbell, Keri R.; Wozniak, Nicholas R.; Colgan, James P.; Judge, Elizabeth J.; Barefield, James E.; Kilcrease, David P.; Wilkerson, Marianne P.; Czerwinski, Ken R.; Clegg, Samuel M.

    2017-08-01

    Nuclear forensics goals for characterizing samples of interest include qualitative and quantitative analysis of major and trace elements, isotopic analysis, phase identification, and physical analysis. These samples may include uranium oxides UO2, U3O8, and UO3, which play an important role in the front end of the nuclear fuel cycle, from mining to fuel fabrication. The focus of this study is to compare the ratios of the intensities of uranium and oxygen emission lines which can be used to distinguish between different uranium oxide materials using Laser-Induced Breakdown Spectroscopy (LIBS). Measurements at varying laser powers were made under an argon atmosphere at 585 Torr to ensure the oxygen emission intensity was originating from the sample, and not from the atmosphere. Fifteen uranium emission lines were used to compare experimental results with theoretical calculations in order to determine the plasma conditions. Using a laser energy of 26 mJ, the uranium lines 591.539 and 682.692 nm provide the highest degree of discrimination between the uranium oxides. The study presented here suggests that LIBS is useful for discriminating uranium oxide phases, UO2, U3O8, and UO3.

  5. Signal enhancement in laser-induced breakdown spectroscopy using fast square-pulse discharges

    Science.gov (United States)

    Sobral, H.; Robledo-Martinez, A.

    2016-10-01

    A fast, high voltage square-shaped electrical pulse initiated by laser ablation was investigated as a means to enhance the analytical capabilities of laser Induced breakdown spectroscopy (LIBS). The electrical pulse is generated by the discharge of a charged coaxial cable into a matching impedance. The pulse duration and the stored charge are determined by the length of the cable. The ablation plasma was produced by hitting an aluminum target with a nanosecond 532-nm Nd:YAG laser beam under variable fluence 1.8-900 J cm- 2. An enhancement of up to one order of magnitude on the emission signal-to-noise ratio can be achieved with the spark discharge assisted laser ablation. Besides, this increment is larger for ionized species than for neutrals. LIBS signal is also increased with the discharge voltage with a tendency to saturate for high laser fluences. Electron density and temperature evolutions were determined from time delays of 100 ns after laser ablation plasma onset. Results suggest that the spark discharge mainly re-excites the laser produced plume.

  6. Plasma diagnostics from self-absorbed doublet lines in laser-induced breakdown spectroscopy

    Science.gov (United States)

    D'Angelo, C. A.; Garcimuño, M.; Díaz Pace, D. M.; Bertuccelli, G.

    2015-10-01

    In this paper, a generalized approach is developed and applied for plasma characterization and quantitative purposes in laser-induced breakdown spectroscopy (LIBS) experiences by employing a selected pair of spectral lines belonging to the same multiplet. It is based on the comparison between experimental ratios of line parameters and the theoretical calculus obtained under the framework of a homogeneous plasma in local thermodynamic equilibrium. The applicability of the method was illustrated by using the atomic resonance transitions 279.55-280.27 nm of Mg II, which are usually detected in laser-induced plasma (LIP) during laser ablation of many kinds of targets. The laser induced plasmas were produced using a Nd:YAG laser from a pressed pellet of powdered calcium hydroxide with a concentration of 300 ppm of Mg. The experimental ratios for peak intensities, total intensities and Stark widths were obtained for different time windows and matched to the theoretical calculus. The temperature and the electron density of the plasma, as well as the Mg columnar density (the atom/ion concentration times the length of the plasma along the line-of-sight), were determined. The results were interpreted under the employed approach.

  7. Optimization of liquid jet system for laser-induced breakdown spectroscopy analysis.

    Science.gov (United States)

    Skočovská, Katarína; Novotný, Jan; Prochazka, David; Pořízka, Pavel; Novotný, Karel; Kaiser, Jozef

    2016-04-01

    A complex optimization of geometrical and temporal parameters of a jet system (developed in Laser-induced breakdown spectroscopy (LIBS) laboratory of Brno University of Technology) for direct elemental analysis of samples in a liquid state of matter using LIBS was carried out. First, the peristaltic pump was synchronized with the flashlamp of the ablation laser, which reduced variation of the ablated sample amount. Also, the fluctuation of the laser ray angle incident on the jet surface was diminished. Such synchronization reduced signal standard deviations and thus increased repeatability of the measurements. Then, laser energy and distance of the focusing lens from the sample were optimized. The gate delay time and the gate width were optimized for single pulse (SP) experiments; the gate delay time and the inter-pulse delay were optimized for the use of double pulse (DP) variant. Results were assessed according to the highest signal to noise ratios and the lowest relative standard deviations of the signal. The sensitivity of the single pulse and the double pulse LIBS for the detection of heavy metals traces, copper (Cu i at 324.754 nm) and lead (Pb i at 405.781 nm), in aqueous solution of copper (ii) sulfate and lead (ii) acetate, was estimated in terms of limits of detection (LODs). As a result, sensitivity improvement of DP LIBS system was observed, the LOD of Cu obtained with DP was calculated 40% lower than LOD gained from SP technique.

  8. Improved accuracy in quantitative laser-induced breakdown spectroscopy using sub-models

    Science.gov (United States)

    Anderson, Ryan; Clegg, Samuel M.; Frydenvang, Jens; Wiens, Roger C.; McLennan, Scott M.; Morris, Richard V.; Ehlmann, Bethany L.; Dyar, M. Darby

    2017-01-01

    Accurate quantitative analysis of diverse geologic materials is one of the primary challenges faced by the Laser-Induced Breakdown Spectroscopy (LIBS)-based ChemCam instrument on the Mars Science Laboratory (MSL) rover. The SuperCam instrument on the Mars 2020 rover, as well as other LIBS instruments developed for geochemical analysis on Earth or other planets, will face the same challenge. Consequently, part of the ChemCam science team has focused on the development of improved multivariate analysis calibrations methods. Developing a single regression model capable of accurately determining the composition of very different target materials is difficult because the response of an element’s emission lines in LIBS spectra can vary with the concentration of other elements. We demonstrate a conceptually simple “sub-model” method for improving the accuracy of quantitative LIBS analysis of diverse target materials. The method is based on training several regression models on sets of targets with limited composition ranges and then “blending” these “sub-models” into a single final result. Tests of the sub-model method show improvement in test set root mean squared error of prediction (RMSEP) for almost all cases. The sub-model method, using partial least squares regression (PLS), is being used as part of the current ChemCam quantitative calibration, but the sub-model method is applicable to any multivariate regression method and may yield similar improvements.

  9. High-speed identification of polymers by laser-induced breakdown spectroscopy

    Science.gov (United States)

    Moench, Ingo; Sattmann, R.; Noll, Reinhard

    1997-09-01

    One way to reduce the increasing waste streams of used polymers is an efficient material recycling. This requires a technology for the separation of polymer mixtures into different material fractions. For this purpose the principal suitability of laser-induced breakdown spectroscopy was investigated. Plasma emission spectra of LDPE, HDPE, PP, PET, PVC, and PS were studied. Basic investigations were performed in order to assess the influence of different measurement parameters and to optimize the analytical performance. More than 140 spectra lines are identified, which can be related to C, H, O, N, C2, CN and CH from the bulk material and the atmosphere and to Al, Ca, Cu, Fe, Mg, Sn, Ti and Zn from additives of the polymer. Estimated detection limits of down to 2 ppm are achieved for metallic additives. Different artificial neural networks were tested for the evaluation of the spectra. PET and PVC can be identified unambiguously detecting the characteristic elements oxygen and chlorine. For plastics, which differ in their contents of inorganic additives, the line emission of additives can be used as `fingerprints' of the plastics. In this way identification accuracies of 87% to 100% for PE, PP, PET and PVC are achieved.

  10. Rapid Analysis of Ash Composition Using Laser-Induced Breakdown Spectroscopy (LIBS)

    Energy Technology Data Exchange (ETDEWEB)

    Tyler L. Westover

    2013-01-01

    Inorganic compounds are known to be problematic in the thermochemical conversion of biomass to syngas and ultimately hydrocarbon fuels. The elements Si, K, Ca, Na, S, P, Cl, Mg, Fe, and Al are particularly problematic and are known to influence reaction pathways, contribute to fouling and corrosion, poison catalysts, and impact waste streams. Substantial quantities of inorganic species can be entrained in the bark of trees during harvest operations. Herbaceous feedstocks often have even greater quantities of inorganic constituents, which can account for as much as one-fifth of the total dry matter. Current methodologies to measure the concentrations of these elements, such as inductively coupled plasma-optical emission spectrometry/mass spectrometry (ICP-OES/MS) are expensive in time and reagents. This study demonstrates that a new methodology employing laser-induced breakdown spectroscopy (LIBS) can rapidly and accurately analyze the inorganic constituents in a wide range of biomass materials, including both woody and herbaceous examples. This technique requires little or no sample preparation, does not consume any reagents, and the analytical data is available immediately. In addition to comparing LIBS data with the results from ICP-OES methods, this work also includes discussions of sample preparation techniques, calibration curves for interpreting LIBS spectra, minimum detection limits, and the use of internal standards and standard reference materials.

  11. Laser induced breakdown spectroscopy for analysis and characterization of degradation pathologies of Roman glasses

    Energy Technology Data Exchange (ETDEWEB)

    Palomar, T. [Instituto de Historia, Centro de Ciencias Humanas y Sociales, CSIC, C/Albasanz 26-28, 28037 Madrid (Spain); Oujja, M., E-mail: m.oujja@iqfr.csic.es [Instituto de Química Física Rocasolano, CSIC, C/Serrano 119, 28006 Madrid (Spain); García-Heras, M.; Villegas, M.A. [Instituto de Historia, Centro de Ciencias Humanas y Sociales, CSIC, C/Albasanz 26-28, 28037 Madrid (Spain); Castillejo, M. [Instituto de Química Física Rocasolano, CSIC, C/Serrano 119, 28006 Madrid (Spain)

    2013-09-01

    The feasibility and possibilities of laser induced breakdown spectroscopy (LIBS) in the full study of non-destructible historic glasses have been explored in the present work. Thirteen Roman glass samples, including seven entire glass beads, from the ancient town of Augusta Emerita (SW Spain) were characterized by LIBS in combination with other conventional techniques, such as scanning electron microscopy/energy dispersive X-ray spectrometry, X-ray fluorescence and ultraviolet–visible spectrophotometry. LIBS stratigraphic analysis, carried out by the application of successive laser pulses on the same spot, has been mainly targeted at characterizing particular features of non-destructible historic glasses, such as bulk chemical composition, surface degradation pathologies (dealkalinization layers and deposits), chromophores, and opacifying elements. The obtained data demonstrate that LIBS can be a useful and alternative technique for spectroscopic studies of historical glasses, especially for those conserved under burial conditions and when it deals with studying non-destructible samples. - Highlights: • Determination of chromophores and opacifiers in non-destructible glass by LIBS • Manganese is determined as principal component of dark deposits. • Antimony appears in all decorations while lead is only present in yellow ones. • Stratigraphic analysis enables the identification of dealkalinization layers.

  12. Laser-induced breakdown spectroscopy: A versatile tool for monitoring traces in materials

    Indian Academy of Sciences (India)

    Shiwani Pandhija; A K Rai

    2008-03-01

    Laser-induced breakdown spectroscopy (LIBS) is an emerging technique for simultaneous multi-elemental analysis of solids, liquids and gases with minute or no sample preparation and thus revolutionized the area of on-line analysis technologies. The foundation for LIBS is a solid state, short-pulsed laser that is focused on a sample to generate a high-temperature plasma, and the emitted radiation from the excited atomic and ionic fragments produced within the plasma is characteristic of the elemental composition of the sample that can be detected and analyzed using a suitable optical spectrograph. In the present paper, the applicability of LIBS for different solid samples having homogeneous (silver ornament, aluminum plate) or heterogeneous composition (soil) using nanosecond laser pulses is discussed. Nanosecond pulse laser makes plasma at the sample surface even at very low pulse energies and also allows for precise ablation of the substrate material with little damage to the surrounding area. We have also studied the penetration of different heavy metals inside the soil surface.

  13. Studying the enhanced phytoremediation of lead contaminated soils via laser induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Hassan, M. [National Institute of Laser Enhanced Science (NILES), Cairo University, Giza (Egypt); Sighicelli, M.; Lai, A.; Colao, F. [ENEA, Dept. FIM, Via Enrico Fermi 00044 Frascati RM (Italy); Ahmed, A.H. Hanafy [Faculty of Agriculture, Cairo University, Giza (Egypt); Fantoni, R. [ENEA, Dept. FIM, Via Enrico Fermi 00044 Frascati RM (Italy); Harith, M.A. [National Institute of Laser Enhanced Science (NILES), Cairo University, Giza (Egypt)], E-mail: mharithm@niles.edu.eg

    2008-10-15

    Phytoremediation popularly known as 'green clean technology' is a new promising technology used for toxic contaminants removal from the environment such as heavy metals (HMs), adopting suitable plants. This concept is increasingly being adopted as it is a cost effective and environmentally friendly alternative to traditional methods of treatment. This study was focused on using scented geranium, Pelargonium zonale, as accumulator or hyperaccumulator plant for natural lead extraction from artificially contaminated soil with different Pb concentrations (0, 2000, 5000, 7000 ppm). Utilization of EDTA as a chelator, that would permit higher metal availability and uptake by the tested plants roots, was also tested. Laser Induced Breakdown Spectroscopy (LIBS) was used to follow up Pb concentrations in both soil and plant green harvestable parts known as shoots, before, during and after lead addition in soil. LIBS measurements were conducted in a microdestructive way by focusing a high energy Nd:YAG laser, emitting at 1064 nm, on plant and soil samples previously dried, homogenized and pressed in pellets. The emitted LIBS spectra were acquired by a gated CCD after dispersion on a monochromator and analyzed to retrieve relative concentrations of the selected HM both in the soil and on plants as a function of the time after doping and eventual chelator addition. EDTA was found to enhance Pb uptake from the soil which increased with time, good correlation was found between LIBS and ICP-OES results of plant tissues spectrochemical analysis.

  14. Studying the enhanced phytoremediation of lead contaminated soils via laser induced breakdown spectroscopy

    Science.gov (United States)

    Hassan, M.; Sighicelli, M.; Lai, A.; Colao, F.; Ahmed, A. H. Hanafy; Fantoni, R.; Harith, M. A.

    2008-10-01

    Phytoremediation popularly known as 'green clean technology' is a new promising technology used for toxic contaminants removal from the environment such as heavy metals (HMs), adopting suitable plants. This concept is increasingly being adopted as it is a cost effective and environmentally friendly alternative to traditional methods of treatment. This study was focused on using scented geranium, Pelargonium zonale, as accumulator or hyperaccumulator plant for natural lead extraction from artificially contaminated soil with different Pb concentrations (0, 2000, 5000, 7000 ppm). Utilization of EDTA as a chelator, that would permit higher metal availability and uptake by the tested plants roots, was also tested. Laser Induced Breakdown Spectroscopy (LIBS) was used to follow up Pb concentrations in both soil and plant green harvestable parts known as shoots, before, during and after lead addition in soil. LIBS measurements were conducted in a microdestructive way by focusing a high energy Nd:YAG laser, emitting at 1064 nm, on plant and soil samples previously dried, homogenized and pressed in pellets. The emitted LIBS spectra were acquired by a gated CCD after dispersion on a monochromator and analyzed to retrieve relative concentrations of the selected HM both in the soil and on plants as a function of the time after doping and eventual chelator addition. EDTA was found to enhance Pb uptake from the soil which increased with time, good correlation was found between LIBS and ICP-OES results of plant tissues spectrochemical analysis.

  15. Analysis of metal surfaces coated with europium-doped titanium dioxide by laser induced breakdown spectroscopy.

    Science.gov (United States)

    Głogocka, Daria; Noculak, Agnieszka; Pucińska, Joanna; Jopek, Wojciech; Podbielska, Halina; Langner, Marek; Przybyło, Magdalena

    2015-01-01

    The surface passivation with titanium sol-gel coatings is a frequently used technique to control the adsorption of selected biological macromolecules and to reduce the exposure of the bulk material to biological matter. Due to the increasing number of new coating-preparation methods and new gel compositions with various types of additives, the quality and homogeneity determination of the surface covering is a critical factor affecting performance of any implanted material. While coating thickness is easy to determine, the homogeneity of the surface distribution of coating materials requires more elaborate methodologies. In the paper, the laser induced breakdown spectroscopy (LIBS) based method, capable to quantitate the homogeneity and uniformity of the europium in titanium dioxide sol-gel coatings on stainless steel surfaces prepared with two different procedures: spin-coating and dip-coating, is presented. The emission intensity of titanium has been used to determine the coating thickness whereas the relative values of europium and titanium emission intensities provide data on the coating homogeneity. The obtained results show that the spin-coating technique provides better surface coverage with titanium dioxide. However, when the surface coating compositions were compared the dip-coating technique was more reliable.

  16. A study of association between fingernail elements and osteoporosis by laser-induced breakdown spectroscopy

    Science.gov (United States)

    Bahreini, Maryam; Hosseinimakarem, Zahra; Hassan Tavassoli, Seyed

    2012-09-01

    Laser induced breakdown spectroscopy (LIBS) is used to investigate the possible effect of osteoporosis on the elemental composition of fingernails. Also, the ability to classify healthy, osteopenic, and osteoporotic subjects based on their fingernail spectra has been examined. 46 atomic and ionic emission lines belonging to 13 elements, which are dominated by calcium and magnesium, have been identified. Measurements are carried out on fingernail clippings of 99 subjects including 27 healthy, 47 osteopenic, and 25 osteoporotic subjects. The Pearson correlations between spectral intensities of different elements of fingernail and age and bone mineral densities (BMDs) in nail samples are calculated. Correlations between line intensities of some elements such as sodium and potassium, calcium and iron, magnesium and silicon and also between some fingernail elements, BMD, and age are observed. Although some of these correlations are weak, some information about mineral metabolism can be deduced from them. Discrimination between nail samples of healthy, osteopenic, and osteoporotic subjects is shown to be somehow possible by a discriminant function analysis using 46 atomic emission lines of the LIBS spectra as input variables. The results of this study provide some evidences for association between osteoporosis and elemental composition of fingernails measured by LIBS.

  17. Laser induced breakdown spectroscopy of human liver samples with Wilson's disease

    Science.gov (United States)

    Grolmusová, Zuzana; Horňáčková, Michaela; Plavčan, Jozef; Kopáni, Martin; Babál, Pavel; Veis, Pavel

    2013-08-01

    Laser induced breakdown spectroscopy (LIBS) is an elemental analytical technique with various applications. The paper demonstrates the first LIBS measurements of human liver samples for the purpose of detecting the higher copper content related with the advanced stage of Wilson's disease. These measurements were implemented using a Nd:YAG laser working at the wavelength of 532 nm and an echelle type spectrometer equipped with an intensified CCD camera allowing for a wide spectral range coverage (200-950 nm) and rapid camera gating (minimum gating time of 5 ns). Seven liver samples with suspected Wilson's disease and five reference samples were investigated. The main parameter of interest was the Cu/C ratio obtained at first from spectra and secondly directly from an iCCD image. Our experiment is a pilot study, which shows LIBS analysis of human liver samples for the purpose of detecting the normal and higher copper content for the first time. The method proved to be a quick and a low-cost approach for the detection of pathological accumulation of copper in the affected tissue.

  18. Detection and classification of live and dead Escherichia coli by laser-induced breakdown spectroscopy.

    Science.gov (United States)

    Sivakumar, P; Fernández-Bravo, A; Taleh, L; Biddle, J F; Melikechi, N

    2015-02-01

    A common goal for astrobiology is to detect organic materials that may indicate the presence of life. However, organic materials alone may not be representative of currently living systems. Thus, it would be valuable to have a method with which to determine the health of living materials. Here, we present progress toward this goal by reporting on the application of laser-induced breakdown spectroscopy (LIBS) to study characteristics of live and dead cells using Escherichia coli (E. coli) strain K12 cells as a model organism since its growth and death in the laboratory are well understood. Our goal is to determine whether LIBS, in its femto- and/or nanosecond forms, could ascertain the state of a living organism. E. coli strain K12 cells were grown, collected, and exposed to one of two types of inactivation treatments: autoclaving and sonication. Cells were also kept alive as a control. We found that LIBS yields key information that allows for the discrimination of live and dead E. coli bacteria based on ionic shifts reflective of cell membrane integrity.

  19. Calibration-free laser-induced breakdown spectroscopy for quantitative elemental analysis of materials

    Indian Academy of Sciences (India)

    V K Unnikrishnan; K Mridul; R Nayak; K Alti; V B Kartha; C Santhosh; G Gupta; B M Suri

    2012-08-01

    The application of calibration-free laser-induced breakdown spectroscopy (CF-LIBS) for quantitative analysis of materials, illustrated by CF-LIBS applied to a brass sample of known composition, is presented in this paper. The LIBS plasma is produced by a 355 nm pulsed Nd:YAG laser with a pulse duration of 6 ns focussed onto a brass sample in air at atmospheric pressure. The time-resolved atomic and ionic emission lines of Cu and Zn from the LIBS spectra recorded by an Echelle spectrograph coupled with a gated intensified charge coupled detector are used for the plasma characterization and the quantitative analysis of the sample. The time delay where the plasma is optically thin and is also in local thermodynamic equilibrium (LTE), necessary for the elemental analysis of samples from the LIBS spectra, is deduced. An algorithm relating the experimentally measured spectral intensity values with the basic physics of the plasma is developed. Using the algorithm, the Zn and Cu concentratioins in the brass sample are determined. The analytical result obtained from the CF-LIBS technique agree well with the certified valued of the elements in the sample, with an accuracy error < 1%

  20. Application of laser-induced breakdown spectroscopy to zirconium in aqueous solution

    Science.gov (United States)

    Ruas, Alexandre; Matsumoto, Ayumu; Ohba, Hironori; Akaoka, Katsuaki; Wakaida, Ikuo

    2017-05-01

    In the context of the Fukushima Dai-ichi Nuclear Power Plant (F1-NPP) decommissioning process, laser-induced breakdown spectroscopy (LIBS) has many advantages. The purpose of the present work is to demonstrate the on-line monitoring capability of the LIBS coupled with the ultra-thin liquid jet sampling method. The study focuses on zirconium in aqueous solution, considering that it is a major element in the F1-NPP fuel debris that has been subject to only a few LIBS studies in the past. The methodology of data acquisition and processing are described. In particular, two regions of interest with many high intensity zirconium lines have been observed around 350 nm in the case of the ionic lines and 478 nm in the case of atomic lines. The best analytical conditions for zirconium are different depending on the analysis of ionic lines or atomic lines. A low LOD of about 4 mg L- 1 could be obtained, showing that LIBS coupled with the ultra-thin liquid jet sampling technique is a promising alternative for more complex solutions found in the F1-NPP, namely mixtures containing zirconium.

  1. Optimization of liquid jet system for laser-induced breakdown spectroscopy analysis

    Science.gov (United States)

    Skočovská, Katarína; Novotný, Jan; Prochazka, David; Pořízka, Pavel; Novotný, Karel; Kaiser, Jozef

    2016-04-01

    A complex optimization of geometrical and temporal parameters of a jet system (developed in Laser-induced breakdown spectroscopy (LIBS) laboratory of Brno University of Technology) for direct elemental analysis of samples in a liquid state of matter using LIBS was carried out. First, the peristaltic pump was synchronized with the flashlamp of the ablation laser, which reduced variation of the ablated sample amount. Also, the fluctuation of the laser ray angle incident on the jet surface was diminished. Such synchronization reduced signal standard deviations and thus increased repeatability of the measurements. Then, laser energy and distance of the focusing lens from the sample were optimized. The gate delay time and the gate width were optimized for single pulse (SP) experiments; the gate delay time and the inter-pulse delay were optimized for the use of double pulse (DP) variant. Results were assessed according to the highest signal to noise ratios and the lowest relative standard deviations of the signal. The sensitivity of the single pulse and the double pulse LIBS for the detection of heavy metals traces, copper (Cu i at 324.754 nm) and lead (Pb i at 405.781 nm), in aqueous solution of copper (ii) sulfate and lead (ii) acetate, was estimated in terms of limits of detection (LODs). As a result, sensitivity improvement of DP LIBS system was observed, the LOD of Cu obtained with DP was calculated 40% lower than LOD gained from SP technique.

  2. Repeatability improvement of laser-induced breakdown spectroscopy using an auto-focus system

    Science.gov (United States)

    Ashrafkhani, Behnam; Bahreini, Maryam; Tavassoli, Seyed Hassan

    2015-05-01

    Laser-induced breakdown spectroscopy (LIBS) is a novel technique for elemental analysis of materials. The repeatability of LIBS results is an important issue in many applications. Many factors influence the repeatability of LIBS results. The aim of this study is to examine the effect of laser beam focusing position or lens to sample distance (LTSD) as one of the most important factors influencing LIBS spectra. A point auto-focus system is designed and applied to provide the same lens to sample distance in every LIBS experiment. This system is employed and the result is compared to that of non-auto-focus technique on samples with different degrees of evenness such as aluminum, paper, tape and human fingernail. The standard deviation of this experiment is measured in the range of 4 to 26 μm. Then, spectrum's repeatability is examined with two samples of aluminum and human fingernail. The standard deviation of spectra is considerably reduced. In conclusion, repeatability of LIBS results could be optimized by using the auto-focus system.

  3. Laser induced breakdown spectroscopy based on single beam splitting and geometric configuration for effective signal enhancement.

    Science.gov (United States)

    Yang, Guang; Lin, Qingyu; Ding, Yu; Tian, Di; Duan, Yixiang

    2015-01-05

    A new laser induced breakdown spectroscopy (LIBS) based on single-beam-splitting (SBS) and proper optical geometric configuration has been initially explored in this work for effective signal enhancement. In order to improve the interaction efficiency of laser energy with the ablated material, a laser beam operated in pulse mode was divided into two streams to ablate/excite the target sample in different directions instead of the conventional one beam excitation in single pulse LIBS (SP-LIBS). In spatial configuration, the laser beam geometry plays an important role in the emission signal enhancement. Thus, an adjustable geometric configuration with variable incident angle between the two splitted laser beams was constructed for achieving maximum signal enhancement. With the optimized angles of 60° and 70° for Al and Cu atomic emission lines at 396.15 nm and 324.75 nm respectively, about 5.6- and 4.8-folds signal enhancements were achieved for aluminum alloy and copper alloy samples compared to SP-LIBS. Furthermore, the temporal analysis, in which the intensity of atomic lines in SP-LIBS decayed at least ten times faster than the SBS-LIBS, proved that the energy coupling efficiency of SBS-LIBS was significantly higher than that of SP-LIBS.

  4. Geographical analysis of ``conflict minerals'' utilizing laser-induced breakdown spectroscopy

    Science.gov (United States)

    Hark, Richard R.; Remus, Jeremiah J.; East, Lucille J.; Harmon, Russell S.; Wise, Michael A.; Tansi, Benjamin M.; Shughrue, Katrina M.; Dunsin, Kehinde S.; Liu, Chunyi

    2012-08-01

    Laser-induced breakdown spectroscopy (LIBS) offers a means of rapidly distinguishing different geographic sources for a mineral because the LIBS plasma emission spectrum provides information on the chemical composition (i.e. geochemical fingerprint) of a geomaterial. An application of this approach with potentially significant commercial and political importance is the spectral fingerprinting of "conflict minerals" such as columbite-tantalite ("coltan"). Following a successful pilot study of a columbite-tantalite suite from North America, a more geographically diverse set of 57 samples from 37 locations around the world was analyzed using a commercially available LIBS system. The LIBS spectra were analyzed using advanced multivariate statistical signal processing techniques. Partial least squares discriminant analysis (PLSDA) resulted in a correct place-level geographic classification at success rates above 90%. The possible role of rare-earth elements (REEs) as a factor contributing to the high levels of sample discrimination was explored. These results provide additional evidence that LIBS has the potential to be utilized in the field as a real-time screening tool to discriminate between columbite-tantalite ores of different provenance.

  5. Ash analysis of flour sample by using laser-induced breakdown spectroscopy

    Science.gov (United States)

    Bilge, Gonca; Sezer, Banu; Eseller, Kemal Efe; Berberoglu, Halil; Koksel, Hamit; Boyaci, Ismail Hakki

    2016-10-01

    Ash content is a measure of total mineral content in flour. It is also an important quality parameter in terms of nutritional labeling as well as processing properties of various cereal products. However, laboratory analysis takes a long time (5-6 h) and results in considerable waste of energy. Therefore, the aim of the study was to develop a new method for ash analysis in wheat flour by using laser induced breakdown spectroscopy (LIBS). LIBS is a multi-elemental, quick and simple spectroscopic method. Unlike basic ash analysis method, it has the potential to analyze a sample in a considerably short time. In the study, wheat flours with different ash contents were analyzed using LIBS and the spectra were evaluated with partial least squares (PLS) method. The results were correlated with the ones taken from standard ash analysis method. Calibration graph showed good linearity with the ash content between 0.48 and 1.39%, and 0.992 coefficient of determination (R2). Limit of detection for ash analysis was calculated as 0.026%. The results indicated that LIBS is a promising and reliable method with high sensitivity for routine ash analysis in flour samples.

  6. Identification of quantum dots labeled metallothionein by fast scanning laser-induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Konecna, Marie [Central European Institute of Technology, Brno University of Technology, Technicka 3058/10, CZ-616 00 Brno (Czech Republic); Department of Chemistry and Biochemistry, Faculty of Agronomy, Mendel University in Brno, Zemedelska 1, CZ-613 00 Brno (Czech Republic); Novotny, Karel [Central European Institute of Technology, Masaryk University, Kamenice 753/5, CZ-625 00 Brno (Czech Republic); Krizkova, Sona [Central European Institute of Technology, Brno University of Technology, Technicka 3058/10, CZ-616 00 Brno (Czech Republic); Department of Chemistry and Biochemistry, Faculty of Agronomy, Mendel University in Brno, Zemedelska 1, CZ-613 00 Brno (Czech Republic); Blazkova, Iva [Department of Chemistry and Biochemistry, Faculty of Agronomy, Mendel University in Brno, Zemedelska 1, CZ-613 00 Brno (Czech Republic); Kopel, Pavel [Central European Institute of Technology, Brno University of Technology, Technicka 3058/10, CZ-616 00 Brno (Czech Republic); Department of Chemistry and Biochemistry, Faculty of Agronomy, Mendel University in Brno, Zemedelska 1, CZ-613 00 Brno (Czech Republic); Kaiser, Jozef [Central European Institute of Technology, Brno University of Technology, Technicka 3058/10, CZ-616 00 Brno (Czech Republic); Institute of Physical Engineering, Brno University of Technology, Technicka 2, CZ-616 69 Brno (Czech Republic); Hodek, Petr [Department of Biochemistry, Faculty of Science, Charles University in Prague, Hlavova 2030/8, CZ-128 00 Prague,Czech Republic (Czech Republic); Kizek, Rene [Central European Institute of Technology, Brno University of Technology, Technicka 3058/10, CZ-616 00 Brno (Czech Republic); Department of Chemistry and Biochemistry, Faculty of Agronomy, Mendel University in Brno, Zemedelska 1, CZ-613 00 Brno (Czech Republic); and others

    2014-11-01

    The technique described in this paper allows detection of quantum dots (QDs) specifically deposited on the polystyrene surface by laser-induced breakdown spectroscopy (LIBS). Using LIBS, the distribution of QDs or their conjugates with biomolecules deposited on the surface can be observed, regardless of the fact if they exhibit fluorescence or not. QDs deposited on the specific surface of polystyrene microplate in the form of spots are detected by determination of the metal included in the QDs structure. Cd-containing QDs (CdS, CdTe) stabilized with mercaptopropionic (MPA) or mercaptosuccinic (MSA) acid, respectively, alone or in the form of conjugates with metallothionein (MT) biomolecule are determined by using the 508.58 nm Cd emission line. The observed absolute detection limit for Cd in CdTe QDs conjugates with MT in one spot was 3 ng Cd. Due to the high sensitivity of this technique, the immunoanalysis in combination with LIBS was also investigated. Cd spatial distribution in sandwich immunoassay was detected. - Highlights: • We describe determination of biomolecules labeled with quantum dots by LIBS. • LIBS and immunoassay are applied for the determination of metallothionein. • Metallothionein amount detected by LIBS is 10-times lower compared to ELISA.

  7. A review of the development of portable laser induced breakdown spectroscopy and its applications

    Energy Technology Data Exchange (ETDEWEB)

    Rakovský, J., E-mail: jozef.rakovsky@jh-inst.cas.cz [J. Heyrovský Institute of Physical Chemistry, Academy of Sciences of the Czech Republic, Dolejškova 3, 18223 Prague 8 (Czech Republic); Čermák, P. [Department of Experimental Physics, Faculty of Mathematics, Physics and Informatics, Comenius University, Mlynská dolina F2, 842 48 Bratislava (Slovakia); Musset, O. [Laboratoire interdisciplinaire Carnot de Bourgogne, UMR CNRS 6303, Université de Bourgogne, BP 47 870, F-21078 Dijon Cedex (France); Veis, P. [Department of Experimental Physics, Faculty of Mathematics, Physics and Informatics, Comenius University, Mlynská dolina F2, 842 48 Bratislava (Slovakia)

    2014-11-01

    In this review, we present person-transportable laser induced breakdown spectroscopy (LIBS) devices that have previously been developed and reported in the literature as well as their applications. They are compared with X-ray fluorescent (XRF) devices, which represent their strongest competition. Although LIBS devices have advantages over XRF devices, such as sensitivity to the light elements, high spatial resolution and the possibility to distinguish between different layers of the sample, there are also disadvantages and both are discussed here. Furthermore, the essential portable LIBS instrumentation (laser, spectrograph and detector) is presented, and published results related to new laser sources (diode-pumped solid-state, microchip and fiber lasers) used in LIBS are overviewed. Compared to conventional compact flashlamp pumped solid-state lasers, the new laser sources provide higher repetition rates, higher efficiency (less power consumption) and higher beam quality, resulting in higher fluences, even for lower energies, and could potentially increase the figure of merit of portable LIBS instruments. Compact spectrometers used in portable LIBS devices and their parts (spectrograph, detector) are also discussed. - Highlights: • Overview of portable LIBS devices transportable by a person • Discussion and new trends about portable LIBS instrumentation: laser, spectrograph and detector • Overview of applications of DPSS, microchip and fiber lasers in LIBS.

  8. Optimization of cavity size for spatial confined laser-induced breakdown spectroscopy.

    Science.gov (United States)

    Su, Xuejiao; Zhou, Weidong; Qian, Huiguo

    2014-11-17

    Spatial confinement with a small cavity is known to enhance the signal intensity of laser-induced breakdown spectroscopy. In this study, the optical emission intensity and signal stability in terms of the relative standard deviation of laser-induced plasmas generated from brass samples with and without the presence of small cylindrical cavities were carefully investigated. The cylindrical cavities were prefabricated by drilling on a set of aluminum plates with variable diameters and heights, which were then placed near the sample surface. Both plasma emission intensity and stability were influenced by cavity diameter and height. With increased cavity diameter from 1.5 mm to 6 mm, the emission intensity of the confined plasma initially increased and then decreased. Furthermore, if a suitable cavity size was selected, both line intensity and stability of the confined plasma emission improved. Based on these observed signal characters with varying cavities, the optimized cavity size for the best signal quality of the laser-induced plasma emission on brass sample was obtained.

  9. Accuracy improvement of quantitative analysis by spatial confinement in laser-induced breakdown spectroscopy.

    Science.gov (United States)

    Guo, L B; Hao, Z Q; Shen, M; Xiong, W; He, X N; Xie, Z Q; Gao, M; Li, X Y; Zeng, X Y; Lu, Y F

    2013-07-29

    To improve the accuracy of quantitative analysis in laser-induced breakdown spectroscopy, the plasma produced by a Nd:YAG laser from steel targets was confined by a cavity. A number of elements with low concentrations, such as vanadium (V), chromium (Cr), and manganese (Mn), in the steel samples were investigated. After the optimization of the cavity dimension and laser fluence, significant enhancement factors of 4.2, 3.1, and 2.87 in the emission intensity of V, Cr, and Mn lines, respectively, were achieved at a laser fluence of 42.9 J/cm(2) using a hemispherical cavity (diameter: 5 mm). More importantly, the correlation coefficient of the V I 440.85/Fe I 438.35 nm was increased from 0.946 (without the cavity) to 0.981 (with the cavity); and similar results for Cr I 425.43/Fe I 425.08 nm and Mn I 476.64/Fe I 492.05 nm were also obtained. Therefore, it was demonstrated that the accuracy of quantitative analysis with low concentration elements in steel samples was improved, because the plasma became uniform with spatial confinement. The results of this study provide a new pathway for improving the accuracy of quantitative analysis of LIBS.

  10. Analysis of acid pitchstone (Iceland using laser induced breakdown spectroscopy (LIBS

    Directory of Open Access Journals (Sweden)

    Pavel Veis

    2013-11-01

    Full Text Available Analysis of acid pitchstone (sample from Iceland using laser induced breakdown spectroscopy (LIBS is presented in this study. The rock sample was taken because of its uniform composition and a homogenous structure at microscale. Elements like Si, Fe, Ca, Mg, Al, Mn, Ti, Na, K, Ba, Sr and Li were detected in the LIBS spectra. Important plasma parameters (electron density and temperature were calculated on the base of Stark broadening mechanism of spectral lines and Saha- Boltzmann plot method, respectively. Quantitative analysis was performed using calibration free (CF approach of LIBS method. CF-LIBS analysis compared to reconstructed bulk rock analysis using precise mineral and glass analyses obtained by electron microprobe analysis (EMPA gives a good correlation, sufficient enough for having primary information of chemical composition of the studied rock sample or alternatively large mineral phases. An element with very low atomic number, lithium, was detected only by LIBS. Li is not detectable on microprobe. Taking into account possible local mineral accumulations and imprecisions induced by estimation of mineral volumes in the glass the CF-LIBS method gives acceptably precise analyses for geological purposes.

  11. Laser-induced breakdown spectroscopy application in environmental monitoring of water quality: a review.

    Science.gov (United States)

    Yu, Xiaodong; Li, Yang; Gu, Xiaofeng; Bao, Jiming; Yang, Huizhong; Sun, Li

    2014-12-01

    Water quality monitoring is a critical part of environmental management and protection, and to be able to qualitatively and quantitatively determine contamination and impurity levels in water is especially important. Compared to the currently available water quality monitoring methods and techniques, laser-induced breakdown spectroscopy (LIBS) has several advantages, including no need for sample pre-preparation, fast and easy operation, and chemical free during the process. Therefore, it is of great importance to understand the fundamentals of aqueous LIBS analysis and effectively apply this technique to environmental monitoring. This article reviews the research conducted on LIBS analysis for liquid samples, and the article content includes LIBS theory, history and applications, quantitative analysis of metallic species in liquids, LIBS signal enhancement methods and data processing, characteristics of plasma generated by laser in water, and the factors affecting accuracy of analysis results. Although there have been many research works focusing on aqueous LIBS analysis, detection limit and stability of this technique still need to be improved to satisfy the requirements of environmental monitoring standard. In addition, determination of nonmetallic species in liquid by LIBS is equally important and needs immediate attention from the community. This comprehensive review will assist the readers to better understand the aqueous LIBS technique and help to identify current research needs for environmental monitoring of water quality.

  12. Bacterial Suspensions Deposited on Microbiological Filter Material for Rapid Laser-Induced Breakdown Spectroscopy Identification.

    Science.gov (United States)

    Malenfant, Dylan J; Gillies, Derek J; Rehse, Steven J

    2016-03-01

    Four species of bacteria, E. coli, S. epidermidis, M. smegmatis, and P. aeruginosa, were harvested from agar nutrient medium growth plates and suspended in water to create liquid specimens for the testing of a new mounting protocol. Aliquots of 30 µL were deposited on standard nitrocellulose filter paper with a mean 0.45 µm pore size to create highly flat and uniform bacterial pads. The introduction of a laser-based lens-to-sample distance measuring device and a pair of matched off-axis parabolic reflectors for light collection improved both spectral reproducibility and the signal-to-noise ratio of optical emission spectra acquired from the bacterial pads by laser-induced breakdown spectroscopy. A discriminant function analysis and a partial least squares-discriminant analysis both showed improved sensitivity and specificity compared to previous mounting techniques. The behavior of the spectra as a function of suspension concentration and filter coverage was investigated, as was the effect on chemometric cell classification of sterilization via autoclaving. © The Author(s) 2016.

  13. Determination of whey adulteration in milk powder by using laser induced breakdown spectroscopy.

    Science.gov (United States)

    Bilge, Gonca; Sezer, Banu; Eseller, Kemal Efe; Berberoglu, Halil; Topcu, Ali; Boyaci, Ismail Hakki

    2016-12-01

    A rapid and in situ method has been developed to detect and quantify adulterated milk powder through adding whey powder by using laser induced breakdown spectroscopy (LIBS). The methodology is based on elemental composition differences between milk and whey products. Milk powder, sweet and acid whey powders were produced as standard samples, and milk powder was adulterated with whey powders. Based on LIBS spectra of standard samples and commercial products, species was identified using principle component analysis (PCA) method, and discrimination rate of milk and whey powders was found as 80.5%. Calibration curves were obtained with partial least squares regression (PLS). Correlation coefficient (R(2)) and limit of detection (LOD) values were 0.981 and 1.55% for adulteration with sweet whey powder, and 0.985 and 0.55% for adulteration with acid whey powder, respectively. The results were found to be consistent with the data from inductively coupled plasma - mass spectrometer (ICP-MS) method. Copyright © 2016 Elsevier Ltd. All rights reserved.

  14. Potential of laser-induced breakdown spectroscopy for the rapid identification of carious teeth.

    Science.gov (United States)

    Singh, Vivek K; Rai, Awadhesh K

    2011-05-01

    The importance of laser-induced breakdown spectroscopy (LIBS) for the rapid identification of teeth affected by caries has been demonstrated. The major and minor elemental constituents of teeth samples were analyzed using the prominent transitions of the atomic lines present in the sample. The elements detected in the tooth sample were: calcium, magnesium, copper, zinc, strontium, titanium, carbon, phosphorous, hydrogen, oxygen, sodium, and potassium. The results revealed that the caries-affected part contained a less amount of calcium and phosphorous in comparison to the healthy part of the tooth sample, whereas higher content of magnesium, copper, zinc, strontium, carbon, sodium, and potassium were present in the caries-affected part. For the first time, we have observed that hydrogen and oxygen were less in healthy parts compared to the caries-affected part of the tooth sample. The density of calcium and phosphorous, which are the main matrix of teeth, was less in the caries-affected part than in the healthy part. The variation in densities of the trace constituents like magnesium and carbon, etc., in caries and healthy parts of the tooth sample are also discussed. The presence of different metal elements in healthy and caries-affected parts of the tooth samples and the possible role of different metal elements in the formation of caries have been discussed.

  15. Rapid identification and discrimination of bacterial strains by laser induced breakdown spectroscopy and neural networks.

    Science.gov (United States)

    Manzoor, S; Moncayo, S; Navarro-Villoslada, F; Ayala, J A; Izquierdo-Hornillos, R; de Villena, F J Manuel; Caceres, J O

    2014-04-01

    Identification and discrimination of bacterial strains of same species exhibiting resistance to antibiotics using laser induced breakdown spectroscopy (LIBS) and neural networks (NN) algorithm is reported. The method has been applied to identify 40 bacterial strains causing hospital acquired infections (HAI), i.e. Pseudomonas aeruginosa, Escherichia coli, Klebsiella pneumoniae, Salmonella typhimurium, Salmonella pullurum and Salmonella salamae. The strains analyzed included both isolated from clinical samples and constructed in laboratory that differ in mutations as a result of their resistance to one or more antibiotics. Small changes in the atomic composition of the bacterial strains, as a result of their mutations and genetic variations, were detected by the LIBS-NN methodology and led to their identification and classification. This is of utmost importance because solely identification of bacterial species is not sufficient for disease diagnosis and identification of the actual strain is also required. The proposed method was successfully able to discriminate strains of the same bacterial species. The optimized NN models provided reliable bacterial strain identification with an index of spectral correlation higher than 95% for the samples analyzed, showing the potential and effectiveness of the method to address the safety and social-cost HAI-related issue. Copyright © 2013 Elsevier B.V. All rights reserved.

  16. Rapid detection of soils contaminated with heavy metals and oils by laser induced breakdown spectroscopy (LIBS).

    Science.gov (United States)

    Kim, Gibaek; Kwak, Jihyun; Kim, Ki-Rak; Lee, Heesung; Kim, Kyoung-Woong; Yang, Hyeon; Park, Kihong

    2013-12-15

    A laser induced breakdown spectroscopy (LIBS) coupled with the chemometric method was applied to rapidly discriminate between soils contaminated with heavy metals or oils and clean soils. The effects of the water contents and grain sizes of soil samples on LIBS emissions were also investigated. The LIBS emission lines decreased by 59-75% when the water content increased from 1.2% to 7.8%, and soil samples with a grain size of 75 μm displayed higher LIBS emission lines with lower relative standard deviations than those with a 2mm grain size. The water content was found to have a more pronounced effect on the LIBS emission lines than the grain size. Pelletizing and sieving were conducted for all samples collected from abandoned mining areas and military camp to have similar water contents and grain sizes before being analyzed by the LIBS with the chemometric analysis. The data show that three types of soil samples were clearly discerned by using the first three principal components from the spectral data of soil samples. A blind test was conducted with a 100% correction rate for soil samples contaminated with heavy metals and oil residues. Copyright © 2013 Elsevier B.V. All rights reserved.

  17. Discrimination of bacteria from Jamaican bauxite soils using laser-induced breakdown spectroscopy.

    Science.gov (United States)

    Lewis, Dawn E; Martinez, Jorge; Akpovo, Charlemagne A; Johnson, Lewis; Chauhan, Ashvini; Edington, Maurice D

    2011-10-01

    Soil bacteria are sensitive to ecological change and can be assessed to gauge anthropogenic influences and ecosystem health. In recent years, there has been a significant increase in the focus on new technologies that can be applied to the evaluation of soil quality. Laser-induced breakdown spectroscopy (LIBS) is a promising technique that has been used for the investigation and characterization of explosives, solids, liquids, gases, biological and environmental samples. In this study, bacteria from un-mined and a chronosequence of reclaimed bauxite soils were isolated on Luria-Bertani agar media. Polymerase chain reaction amplification of the bacterial 16S rDNA, sequencing, and phylogenetic analysis were applied to each isolated soil bacteria from the sample sites resulting in the identification and classification of the organisms. Femtosecond LIBS performed on the isolated bacteria showed atomic and ionic emission lines in the spectrum containing inorganic elements such as sodium (Na), magnesium (Mg), potassium (K), zinc (Zn), and calcium (Ca). Principal component analysis and partial least squares regression analysis were performed on the acquired bacterial spectra demonstrating that LIBS has the potential to differentiate and discriminate among bacteria in the un-mined and reclaimed chronosequence of bauxite soils. © Springer-Verlag 2011

  18. Spectrochemical Analysis of Soil around Leather Tanning Industry Using Laser Induced Breakdown Spectroscopy

    Directory of Open Access Journals (Sweden)

    Shakeel Ahmad Khan

    2013-01-01

    Full Text Available We report the use of laser induced breakdown spectroscopy (LIBS to determine the chromium contamination of soil due to effluents from leather tanning industry in Kasur District of Punjab (+31∘6′23.21″, +74∘27′16.29″ in Pakistan. Calibration curves were constructed by indigenously prepared standard sample and fitting of curves by linear regression. The limit of detection (LOD was found to be 23.71 mg kg−1. It has been found that the concentration of chromium in the soil is up to 839 mg kg−1 in vicinity of effluent drain and 1829 mg kg−1 in the area of old stagnant pool, which is much higher than the safe limits. Qualitative detection of other elements like Na, Cl, Fe, P, and Si was done from LIBS spectra. The leaching of soil contaminants due to seepage of industrial effluents from deteriorating brick lined drains in horizontal direction has also been observed.

  19. Multivariate methods for analysis of environmental reference materials using laser-induced breakdown spectroscopy

    Directory of Open Access Journals (Sweden)

    Shikha Awasthi

    2017-06-01

    Full Text Available Analysis of emission from laser-induced plasma has a unique capability for quantifying the major and minor elements present in any type of samples under optimal analysis conditions. Chemometric techniques are very effective and reliable tools for quantification of multiple components in complex matrices. The feasibility of laser-induced breakdown spectroscopy (LIBS in combination with multivariate analysis was investigated for the analysis of environmental reference materials (RMs. In the present work, different (Certified/Standard Reference Materials of soil and plant origin were analyzed using LIBS and the presence of Al, Ca, Mg, Fe, K, Mn and Si were identified in the LIBS spectra of these materials. Multivariate statistical methods (Partial Least Square Regression and Partial Least Square Discriminant Analysis were employed for quantitative analysis of the constituent elements using the LIBS spectral data. Calibration models were used to predict the concentrations of the different elements of test samples and subsequently, the concentrations were compared with certified concentrations to check the authenticity of models. The non-destructive analytical method namely Instrumental Neutron Activation Analysis (INAA using high flux reactor neutrons and high resolution gamma-ray spectrometry was also used for intercomparison of results of two RMs by LIBS.

  20. Background removal in soil analysis using laser- induced breakdown spectroscopy combined with standard addition method.

    Science.gov (United States)

    Yi, R X; Guo, L B; Zou, X H; Li, J M; Hao, Z Q; Yang, X Y; Li, X Y; Zeng, X Y; Lu, Y F

    2016-02-08

    The matrix effect of powder samples, especially for soil samples, is significant in laser-induced breakdown spectroscopy (LIBS), which affects the prediction accuracy of the element concentration. In order to reduce this effect of the soil samples in LIBS, the standard addition method (SAM) based on background removal by wavelet transform algorithm was investigated in this work. Five different kinds of certified reference soil samples (lead (Pb) concentrations were 110, 283, 552, 675, and 1141 ppm, respectively) were used to examine the accuracy of this method. The root mean square error of prediction (RMSEP) was more than 303 ppm by using the conventional calibration method. After adoption of SAM with background removal by wavelet transform algorithm, the RMSEP was reduced to 25.7 ppm. Therefore, the accuracy of the Pb element was improved significantly. The mechanism of background removal by wavelet transform algorithm based on SAM is discussed. Further study demonstrated that this method can also improve the predicted accuracy of the Cd element.

  1. [Determination of potassium in farmland soil using laser-induced breakdown spectroscopy].

    Science.gov (United States)

    Dong, Da-Ming; Zheng, Wen-Gang; Zhao, Chun-Jiang; Zhao, Xian-De; Jiao, Lei-Zi; Zhang, Shi-Rui

    2013-03-01

    The real-time measurement of potassium in farmland soil has great importance. A method to determine the potassium content in farmland soil based on laser-induced breakdown spectroscopy (LIBS) was studied using a LIBS equipment consisting of a 1,064 nm laser generator and a high resolution spectrometer. The farmland soil samples with potassium content in the range of 8.74-34.56 g.kg-1 were analyzed. The 766.49 nm was chosen as the analysis line, by comparing the potassium atom characteristic lines of 404.40, 404.72, 766.49 and 769.90 nm. The errors of characteristic line strength caused by the laser stability and random noise was analyzed. The silicon, which is nearly constant in farmland soil, was chosen as the standard element, and a calibration model between the ratio of potassium to silicon (K/Si) and the potassium content was established. The linear fitting degree of the calibration curve was 0.935, and the relative standard deviation of the calibration model for prediction set samples was 9.26%.

  2. Laser-induced breakdown spectroscopy for elemental characterization of calcitic alterations on cave walls.

    Science.gov (United States)

    Bassel, Léna; Motto-Ros, Vincent; Trichard, Florian; Pelascini, Frédéric; Ammari, Faten; Chapoulie, Rémy; Ferrier, Catherine; Lacanette, Delphine; Bousquet, Bruno

    2017-01-01

    Cave walls are affected by different kinds of alterations involving preservative issues in the case of ornate caves, in particular regarding the rock art covering the walls. In this context, coralloids correspond to a facies with popcorn-like aspect belonging to the speleothem family, mostly composed of calcium carbonate. The elemental characterization indicates the presence of elements that might be linked to the diagenesis and the expansion of the alterations as demonstrated by prior analyses on stalagmites. In this study, we report the use of laser-induced breakdown spectroscopy (LIBS) to characterize the elemental composition of one coralloid sample with a portable instrument allowing punctual measurements and a laboratory mapping setup delivering elemental images with spatial resolution at the micrometric scale, being particularly attentive to Mg, Sr, and Si identified as elements of interest. The complementarity of both instruments allows the determination of the internal structure of the coralloid. Although a validation based on a reference technique is necessary, LIBS data reveal that the external layer of the coralloid is composed of laminations correlated to variations of the LIBS signal of Si. In addition, an interstitial layer showing high LIBS signals for Fe, Al, and Si is interpreted to be a detrital clay interface between the external and the internal part of the coralloid. These preliminary results sustain a possible formation scenario of the coralloid by migration of the elements from the bedrock.

  3. Quantitative determination of calcium, magnesium, and zinc in fingernails by laser-induced breakdown spectroscopy.

    Science.gov (United States)

    Rusak, David A; Zeleniak, Ann E; Obuhosky, Jillian L; Holdren, Scott M; Noldy, Craig A

    2013-12-15

    Quantitative determination of Ca, Mg, and Zn in fingernails was performed with laser-induced breakdown spectroscopy. Two different methods of producing solid standards for calibration were explored - preparation of keratin pellets and deposition of aqueous solutions to filter papers. Measurements of the temperature and electron density of the plasma produced on keratin pellets, filter paper, and nails were performed, and it was determined that the standards prepared on filter paper gave plasma temperatures and electron densities closer to those observed on the nails. The ablation rate of the filter paper was also more similar to that of the nails. Using calibration curves produced using these filter paper standards, Ca, Mg, and Zn were determined in fingernails of 11 subjects. For comparison, the same samples were digested and atomic absorption was used to determine the same three elements. The differences in results are discussed in light of sample homogeneity and instrumental precision; the best agreement was obtained for determination of Zn. The work suggests that the filter paper method of standard preparation may be appropriate for LIBS analysis of other samples that give relatively low temperature, low electron density plasmas (i.e., polymers). © 2013 Elsevier B.V. All rights reserved.

  4. Analysis and classification of heterogeneous kidney stones using laser-induced breakdown spectroscopy (LIBS).

    Science.gov (United States)

    Oztoprak, Belgin Genc; Gonzalez, Jhanis; Yoo, Jong; Gulecen, Turgay; Mutlu, Nazim; Russo, Richard E; Gundogdu, Ozcan; Demir, Arif

    2012-11-01

    Kidney stones were analyzed using laser-induced breakdown spectroscopy (LIBS), utilizing a high resolution multi-channel charge-coupled device (CCD) spectrometer and a nanosecond-pulse Nd : YAG laser. The kidney stones were also characterized using X-ray diffraction (XRD) and X-ray fluorescence (XRF) techniques for comparative analysis. It was found that the ratio of hydrogen (H) to carbon (C) was an important indicator of organic compounds such as uric acid. Advantages of LIBS, especially with regards to amount of sample required and sample preparation as well as the ability to carry out elemental analysis and classification of kidney stones simultaneously, over other analytical techniques such as XRD and XRF are discussed. The common minor elements detected in the kidney stones include P, S, Si, Ti, and Zn. Principal component analysis (PCA) and partial least squares discriminant analysis (PLS-DA) of broadband LIBS spectra were employed for classifying different types of kidney stones. The results are beneficial in understanding kidney stone formation processes, which can lead to preventive therapeutic strategies and treatment methods for urological patients.

  5. A novel rapid quantitative analysis of drug migration on tablets using laser induced breakdown spectroscopy.

    Science.gov (United States)

    Yokoyama, Makoto; Tourigny, Martine; Moroshima, Kenji; Suzuki, Junsuke; Sakai, Miyako; Iwamoto, Kiyoshi; Takeuchi, Hirofumi

    2010-11-01

    There have been few reports wherein drug migration from the interior to the surface of a tablet has been analyzed quantitatively until now. In this paper, we propose a novel, rapid, quantitative analysis of drug migration in tablets using laser induced breakdown spectroscopy (LIBS). To evaluate drug migration, model tablets containing nicardipine hydrochloride as active pharmaceutical ingredient (API) were prepared by a conventional wet granulation method. Since the color of this API is pale yellow and all excipients are white, we can observe the degree of drug migration by visual inspection in these model tablets. In order to prepare tablets with different degrees of drug migration, the temperature of the drying process after tableting was varied between 50 to 80 °C. Using these manifold tablets, visual inspection, Fourier transform (FT)-IR mapping and LIBS analysis were carried out to evaluate the drug migration in the tablets. While drug migration could be observed using all methods, only LIBS analysis could provide quantitative analysis wherein the average LIBS intensity was correlated with the degree of drug migration obtained from the drying temperature. Moreover, in this work, we compared the sample preparation, data analysis process and measurement time for visual inspection, FT-IR mapping and LIBS analysis. The results of the comparison between these methods demonstrated that LIBS analysis is the simplest and the fastest method for migration monitoring. From the results obtained, we conclude that LIBS analysis is one of most useful process analytical technology (PAT) tools to solve the universal migration problem.

  6. Laser Induced Breakdown Spectroscopy Based on Single Beam Splitting and Geometric Configuration for Effective Signal Enhancement

    Science.gov (United States)

    Yang, Guang; Lin, Qingyu; Ding, Yu; Tian, Di; Duan, Yixiang

    2015-01-01

    A new laser induced breakdown spectroscopy (LIBS) based on single-beam-splitting (SBS) and proper optical geometric configuration has been initially explored in this work for effective signal enhancement. In order to improve the interaction efficiency of laser energy with the ablated material, a laser beam operated in pulse mode was divided into two streams to ablate/excite the target sample in different directions instead of the conventional one beam excitation in single pulse LIBS (SP-LIBS). In spatial configuration, the laser beam geometry plays an important role in the emission signal enhancement. Thus, an adjustable geometric configuration with variable incident angle between the two splitted laser beams was constructed for achieving maximum signal enhancement. With the optimized angles of 60° and 70° for Al and Cu atomic emission lines at 396.15 nm and 324.75 nm respectively, about 5.6- and 4.8-folds signal enhancements were achieved for aluminum alloy and copper alloy samples compared to SP-LIBS. Furthermore, the temporal analysis, in which the intensity of atomic lines in SP-LIBS decayed at least ten times faster than the SBS-LIBS, proved that the energy coupling efficiency of SBS-LIBS was significantly higher than that of SP-LIBS. PMID:25557721

  7. Identification of meat species by using laser-induced breakdown spectroscopy.

    Science.gov (United States)

    Bilge, Gonca; Velioglu, Hasan Murat; Sezer, Banu; Eseller, Kemal Efe; Boyaci, Ismail Hakki

    2016-09-01

    The aim of the present study is to identify meat species by using laser-induced breakdown spectroscopy (LIBS). Elemental composition differences between meat species were used for meat identification. For this purpose, certain amounts of pork, beef and chicken were collected from different sources and prepared as pellet form for LIBS measurements. The obtained LIBS spectra were evaluated with some chemometric methods, and meat species were qualitatively discriminated with principal component analysis (PCA) method with 83.37% ratio. Pork-beef and chicken-beef meat mixtures were also analyzed with partial least square (PLS) method quantitatively. Determination coefficient (R(2)) and limit of detection (LOD) values were found as 0.994 and 4.4% for pork adulterated beef, and 0.999 and 2.0% for chicken adulterated beef, respectively. In the light of the findings, it was seen that LIBS can be a valuable tool for quality control measurements of meat as a routine method. Copyright © 2016 Elsevier Ltd. All rights reserved.

  8. Determination of a brass alloy concentration composition using calibration-free laser-induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Achouri, M.; Baba-Hamed, T.; Beldjilali, S. A., E-mail: sidahmed.beldjilali@univ-usto.dz; Belasri, A. [Université des Sciences et de la Technologie d’Oran Mohamed Boudiaf USTO-MB, LPPMCA (Algeria)

    2015-09-15

    Laser-induced breakdown spectroscopy (LIBS) is a technique that can provide qualitative and quantitative measurements of the characteristics of irradiated metals. In the present work, we have calculated the parameters of the plasma produced from a brass alloy sample under the action of a pulsed Nd: YAG laser operating at 1064 nm. The emission lines of copper atoms (Cu I), zinc atoms (Zn I), and lead atoms (Pb I), which are elements of a brass alloy composition, were used to investigate the parameters of the brass plasma. The spectral profiles of Cu, Zn, and Pb lines have been used to extract the electron temperature and density of the brass alloy plasma. The characteristics of Cu, Zn, and Pb were determined quantatively by the calibration-free LIBS (CF-LIBS) method considering for accurate analysis that the laser-induced ablated plasma is optically thin in local thermodynamic equilibrium conditions and the plasma ablation is stoichiometric. The Boltzmann plot method was used to evaluate the plasma temperature, and the Stark broadened profiles were used to determine the electron density. An algorithm based on the experimentally measured values of the intensity of spectral lines and the basic laws of plasma physics was developed for the determination of Cu, Zn, and Pb concentrations in the brass sample. The concentrations C{sub CF-LIBS} calculated by CF-LIBS and the certified concentrations C{sub certified} were very close.

  9. Dealloying evidence on corroded brass by laser-induced breakdown spectroscopy mapping and depth profiling measurements

    Science.gov (United States)

    Cerrato, R.; Casal, A.; Mateo, M. P.; Nicolas, G.

    2017-04-01

    The dealloying phenomenon, also called demetalification, is a; consequence of a corrosion problem found in binary alloys where an enrichment of one of the two main elements of the alloy is produced at the expense of the leaching of the other element. In the present work, the ability of laser induced breakdown spectroscopy (LIBS) for the detection and characterization of dealloying films formed on metal has been tested. For this purpose, specific areas of brass specimens have been subjected to a chemical attack of the surface in order to produce a selective leaching of zinc or dezincification. For the lateral and in-depth characterization of the dealloyed areas by LIBS, depth profiles, 2D and 3D maps have been generated from the treated samples and from a reference non-treated sample. The differences in the maps and depth profiles between the corroded and non-corroded regions have allowed to reveal the localization and extension of the dealloying process along the brass sample surface and to estimate the thickness of the dezincification layers, demonstrating the capability of LIBS technique for the characterization of dealloying phenomena.

  10. Spectroscopic detection of health hazardous contaminants in lipstick using Laser Induced Breakdown Spectroscopy.

    Science.gov (United States)

    Gondal, M A; Seddigi, Z S; Nasr, M M; Gondal, B

    2010-03-15

    Laser Induced Breakdown Spectroscopy (LIBS) technique was applied to determine the concentrations of different toxic elements like lead, chromium, cadmium and zinc in four different lipstick brands sold at local markets in Saudi Arabia. These samples contain toxic elements like lead, cadmium and chromium which are carcinogen dermatitis, allergic and eczematous. Their extraction from human body takes over 40 years and accumulation in the body cause problems like disruption of nervous systems and kidney damage. They could trigger to systemic lupus erythematosus (SLE). In order to test the validity of our LIBS results, standard technique like (ICP-AES) was also applied. To the best of our knowledge, this is the first study where LIBS technique was applied for the measurement of toxic substances in lipsticks. The maximum concentration detected in four lipstick brands was much higher than the permissible safe limits for human use and could lead to serious health problems. It is worth mentioning that the lipstick is not a solid rather is in fluid state which is not trivial to analyze using LIBS technique. For this purpose, special treatment of the lipstick samples was necessary to analyze with our LIBS method. (c) 2009 Elsevier B.V. All rights reserved.

  11. Pathogenic Escherichia coli strain discrimination using laser-induced breakdown spectroscopy

    Science.gov (United States)

    Diedrich, Jonathan; Rehse, Steven J.; Palchaudhuri, Sunil

    2007-07-01

    A pathogenic strain of bacteria, Escherichia coli O157:H7 (enterohemorrhagic E. coli or EHEC), has been analyzed by laser-induced breakdown spectroscopy (LIBS) with nanosecond pulses and compared to three nonpathogenic E. coli strains: a laboratory strain of K-12 (AB), a derivative of the same strain termed HF4714, and an environmental strain, E. coli C (Nino C). A discriminant function analysis (DFA) was performed on the LIBS spectra obtained from live colonies of all four strains. Utilizing the emission intensity of 19 atomic and ionic transitions from trace inorganic elements, the DFA revealed significant differences between EHEC and the Nino C strain, suggesting the possibility of identifying and discriminating the pathogenic strain from commonly occurring environmental strains. EHEC strongly resembled the two K-12 strains, in particular, HF4714, making discrimination between these strains difficult. DFA was also used to analyze spectra from two of the nonpathogenic strains cultured in different media: on a trypticase soy (TS) agar plate and in a liquid TS broth. Strains cultured in different media were identified and effectively discriminated, being more similar than different strains cultured in identical media. All bacteria spectra were completely distinct from spectra obtained from the nutrient medium or ablation substrate alone. The ability to differentiate strains prepared and tested in different environments indicates that matrix effects and background contaminations do not necessarily preclude the use of LIBS to identify bacteria found in a variety of environments or grown under different conditions.

  12. Energetic materials identification by laser-induced breakdown spectroscopy combined with artificial neural network.

    Science.gov (United States)

    Farhadian, Amir Hossein; Tehrani, Masoud Kavosh; Keshavarz, Mohammad Hossein; Darbani, Seyyed Mohammad Reza

    2017-04-20

    In this study, for the first time to the best of our knowledge, a combination of the laser-induced breakdown spectroscopy (LIBS) technique and artificial neural network (ANN) analysis has been implemented for the identification of energetic materials, including TNT, RDX, black powder, and propellant. Also, aluminum, copper, inconel, and graphite have been used for more accurate investigation and comparison. After the LIBS test and spectrum acquisition on all samples in both air and argon ambient, optimized neural networks were designed by LIBS data. Based on input data, three ANN algorithms are proposed: the first is fed with the whole LIBS spectra in air (ANN1) and the second with the principle component analysis (PCA) scores of each spectrum in air (ANN2) and the other with the PCA scores of the spectrum in Ar (ANN3). According to the results, error of the network is very low in ANN2 and 3 and the best identification and discrimination was obtained by ANN3. After these, in order to validate and for more investigation of this combined method, we also used Al/RDX standard samples for analysis.

  13. Improved accuracy in quantitative laser-induced breakdown spectroscopy using sub-models

    Science.gov (United States)

    Anderson, Ryan B.; Clegg, Samuel M.; Frydenvang, Jens; Wiens, Roger C.; McLennan, Scott; Morris, Richard V.; Ehlmann, Bethany; Dyar, M. Darby

    2017-03-01

    Accurate quantitative analysis of diverse geologic materials is one of the primary challenges faced by the laser-induced breakdown spectroscopy (LIBS)-based ChemCam instrument on the Mars Science Laboratory (MSL) rover. The SuperCam instrument on the Mars 2020 rover, as well as other LIBS instruments developed for geochemical analysis on Earth or other planets, will face the same challenge. Consequently, part of the ChemCam science team has focused on the development of improved multivariate analysis calibrations methods. Developing a single regression model capable of accurately determining the composition of very different target materials is difficult because the response of an element's emission lines in LIBS spectra can vary with the concentration of other elements. We demonstrate a conceptually simple "sub-model" method for improving the accuracy of quantitative LIBS analysis of diverse target materials. The method is based on training several regression models on sets of targets with limited composition ranges and then "blending" these "sub-models" into a single final result. Tests of the sub-model method show improvement in test set root mean squared error of prediction (RMSEP) for almost all cases. The sub-model method, using partial least squares (PLS) regression, is being used as part of the current ChemCam quantitative calibration, but the sub-model method is applicable to any multivariate regression method and may yield similar improvements.

  14. Development of laser induced breakdown spectroscopy for studying erosion, deposition, and fuel retention in ASDEX Upgrade

    Energy Technology Data Exchange (ETDEWEB)

    Paris, Peeter; Piip, Kaarel [Institute of Physics, University of Tartu, Tartu (Estonia); Hakola, Antti [VTT Technical Research Centre of Finland, Espoo (Finland); Laan, Matti, E-mail: matti.laan@ut.ee [Institute of Physics, University of Tartu, Tartu (Estonia); Aints, Märt [Institute of Physics, University of Tartu, Tartu (Estonia); Koivuranta, Seppo; Likonen, Jari [VTT Technical Research Centre of Finland, Espoo (Finland); Lissovski, Aleksandr [Institute of Physics, University of Tartu, Tartu (Estonia); Mayer, Matej [Max-Planck-Institut für Plasmaphysik, Garching (Germany); Neu, Rudolf [Max-Planck-Institut für Plasmaphysik, Garching (Germany); Technische Universität München, Fachgebt Plasma-Material-Wechelwirkung, Garching (Germany); Rohde, Volker; Sugiyama, Kazuyoshi [Max-Planck-Institut für Plasmaphysik, Garching (Germany)

    2015-10-15

    Highlights: • LIBS development for in situ monitoring of first walls of fusion reactors. • Testing of samples extracted from the divertor tiles of ASDEX Upgrade. • Reliable detection of deuterium depth profiles. • A method of LIBS data processing which allows to find the elemental depth profiles. • Comparison of LIBS results with those of other surface characterization methods. - Abstract: The paper deals with the development of laser induced breakdown spectroscopy (LIBS) into an in situ method for studying erosion/deposition processes at the first walls of fusion reactors. To this end, samples extracted from the divertor tiles of ASDEX Upgrade after the 2009 plasma operations were analyzed using LIBS for their composition and the results were compared with other post mortem deposition data. Quantitative depth profiles for the elemental concentrations were extracted from LIBS spectra by applying a novel data processing method. In addition, both multiline and multispot averaging procedures were applied to reduce fluctuations in the data. The LIBS concentration profiles matched qualitatively with those given by secondary ion mass spectrometry and quantitatively with the ion-beam data. The deuterium content of the samples could be reliably determined if the surface densities were >10{sup 17} at/cm{sup 2}.

  15. Laser-induced breakdown spectroscopy of scaled steel samples taken from continuous casting blooms

    Science.gov (United States)

    Meinhardt, Christoph; Sturm, Volker; Fleige, Rüdiger; Fricke-Begemann, Cord; Noll, Reinhard

    2016-09-01

    To analyse continuous casting steel blooms a removal of non-representative surface layers is required prior to the analysis. In this work, an optimized process is developed to ablate such layers and to analyse the bulk material underneath with laser-induced breakdown spectroscopy (LIBS). A high ablation rate is crucial since the time slot for an inline analysis is limited, e.g. to metallic layers and typically have thicknesses from 200 μm to 600 μm each. The ablation behaviour of the oxide differs significantly from that of the metallic layers. An operation scheme for inline material identification is worked out to perform ablation and analysis with a single laser source. During the ablation phase and the subsequent measurement phase the laser source is operated with individually tailored parameters. A total penetration depth exceeding 1 mm in steel can be achieved within 20 s of ablation. Thereby the influence of non-representative surface layers on the following LIBS measurement can be suppressed to a large extent. For chromium, relative root mean square errors of predictions of less than 13% were achieved on high alloy samples with up to 16 m.-% Cr and on low alloy samples with Cr contents below 2 m.-%.

  16. Quantitative determination of sulfur content in concrete with laser-induced breakdown spectroscopy

    Science.gov (United States)

    Weritz, F.; Ryahi, S.; Schaurich, D.; Taffe, A.; Wilsch, G.

    2005-08-01

    Laser-induced breakdown spectroscopy has been employed for the investigation of the sulfur content of concrete. Sulfur compounds are a natural but minor component in building materials. The ingress of sulfates or sulfuric acid constitutes a major risk of chemical aggression for concrete. There is a need for a fast method, which can be used on-site and is able to investigate a wide range of different measuring points, so that damages can be characterized. For quantitative determination the sulfur spectral line at 921.3 nm is used. The optimum ambient atmosphere has been determined by comparison of measurements accomplished under air, argon and helium atmosphere. Reference samples have been produced and calibration curves have been determined, the results of LIBS measurements are compared with results from chemical analysis. Defining a limit for the intensity ratio of a calcium and a oxygen spectral line can reduce the influence of the heterogeneity of the material, so that only spectra with a high amount of cementitious material are evaluated. Depth profiles and spatial resolved sulfur distributions are presented measured on concrete cores originating from a highly sulfate contaminated clarifier.

  17. A compact field-portable double-pulse laser system to enhance laser induced breakdown spectroscopy

    Science.gov (United States)

    Li, Shuo; Liu, Lei; Yan, Aidong; Huang, Sheng; Huang, Xi; Chen, Rongzhang; Lu, Yongfeng; Chen, Kevin

    2017-02-01

    This paper reports the development of a compact double-pulse laser system to enhance laser induced breakdown spectroscopy (LIBS) for field applications. Pumped by high-power vertical-surface emitting lasers, the laser system that produces 16 ns pulse at 12 mJ/pulse with total weight less than 10 kg is developed. The inter-pulse delay can be adjusted from 0 μ s with 0.5 μ s increment. Several LIBS experiments were carried out on NIST standard aluminum alloy samples. Comparing with the single-pulse LIBS, up to 9 times enhancement in atomic emission line was achieved with continuum background emission reduced by 70%. This has led to up to 10 times improvement in the limit of detection. Signal stability was also improved by 128% indicating that a more robust and accurate LIBS measurement can be achieved using a compact double-pulse laser system. This paper presents a viable and field deployable laser tool to dramatically improve the sensitivity and applicability of LIBS for a wide array of applications.

  18. RCRA materials analysis by laser-induced breakdown spectroscopy: Detection limits in soils

    Energy Technology Data Exchange (ETDEWEB)

    Koskelo, A.; Cremers, D.A.

    1994-09-01

    The goal of the Technical Task Plan (TTP) that this report supports is research, development, testing and evaluation of a portable analyzer for RCRA and other metals. The instrumentation to be built will be used for field-screening of soils. Data quality is expected to be suitable for this purpose. The data presented in this report were acquired to demonstrate the detection limits for laser-induced breakdown spectroscopy (LIBS) of soils using instrument parameters suitable for fieldable instrumentation. The data are not expected to be the best achievable with the high pulse energies available in laboratory lasers. The report presents work to date on the detection limits for several elements in soils using LIBS. The elements targeted in the Technical Task Plan are antimony, arsenic, beryllium, cadmium, chromium, lead, selenium, and zirconium. Data for these elements are presented in this report. Also included are other data of interest to potential customers for the portable LIBS apparatus. These data are for barium, mercury, cesium and strontium. Data for uranium and thorium will be acquired during the tasks geared toward mixed waste characterization.

  19. Evaluation of sandstone surface relaxivity using laser-induced breakdown spectroscopy.

    Science.gov (United States)

    Washburn, Kathryn E; Sandor, Magdalena; Cheng, Yuesheng

    2017-02-01

    Nuclear magnetic resonance (NMR) relaxometry is a common technique used to assess the pore size of fluid-filled porous materials in a wide variety of fields. However, the NMR signal itself only provides a relative distribution of pore size. To calculate an absolute pore size distribution from the NMR data, the material's surface relaxivity needs to be known. Here, a method is presented using laser-induced breakdown spectroscopy (LIBS) to evaluate surface relaxivity in sandstones. NMR transverse and longitudinal relaxation was measured on a set of sandstone samples and the surface relaxivity was calculated from the pore size distribution determined with MICP measurements. Using multivariate analysis, it was determined that the LIBS data can predict with good accuracy the longitudinal (R(2)∼0.84) and transverse (R(2)∼0.79) surface relaxivity. Analysis of the regression coefficients shows significant influence from several elements. Some of these are elements previously established to have an effect on surface relaxivity, such as iron and manganese, while others are not commonly associated with surface relaxivity, such as cobalt and titanium. Furthermore, LIBS provides advantages compared to current methods to calibrate surface relaxivity in terms of speed, portability, and sample size requirements. While this paper focuses on geological samples, the method could potentially be expanded to other types of porous materials.

  20. High-Resolution Laser-Induced Breakdown Spectroscopy used in Homeland Security and Forensic Applications

    Energy Technology Data Exchange (ETDEWEB)

    Martin, Madhavi Z [ORNL; Wullschleger, Stan D [ORNL; Vass, Arpad Alexander [ORNL; Martin, Rodger Carl [ORNL; Grissino-Mayer, Henri [ORNL

    2006-01-01

    The technique of laser-induced breakdown spectroscopy (LIBS) to detect elements for a variety of homeland security applications such as nuclear materials identification and inventory,and forensic applications has been demonstrated. For nuclear materials applications, we detected and profiled metals in coatings that were used to encapsulate nuclear fuel. Multivariate analysis has been successfully employed in the quantification of elements present in treated wood and engineered wood composites. These examples demonstrate that LIBS-based techniques are inherently well suited for diverse environmental applications related to homeland security. Three key advantages are evident: (1) small samples (mg) are sufficient; (2) samples can be analyzed by LIBS very rapidly, and (3) biological materials such as human and animal bones and wood can be analyzed with minimal sample preparation. For forensic applications they have used LIBS to determine differences in animal and human bones. They have also applied this technique in the determination of counterfeit and non-counterfeit currency. They recently applied LIBS in helping to solve a murder case.

  1. Spectroscopic detection of health hazardous contaminants in lipstick using Laser Induced Breakdown Spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Gondal, M.A., E-mail: magondal@kfupm.edu.sa [Physics Department and Center of Excellence in Nanotechnology, King Fahd University of Petroleum and Minerals, Dhahran 31261 (Saudi Arabia); Seddigi, Z.S. [Chemistry Department, Umm Al-Qura University, Makkah (Saudi Arabia); Nasr, M.M. [Natural Science Departments, Riyadh College of Dentistry and Pharmacy, P.O. Box 321815, Riyadh 11343 (Saudi Arabia); Gondal, B. [Plastic and Reconstructive Aesthetic Surgery, Whitfield Hospital, Waterford (Ireland)

    2010-03-15

    Laser Induced Breakdown Spectroscopy (LIBS) technique was applied to determine the concentrations of different toxic elements like lead, chromium, cadmium and zinc in four different lipstick brands sold at local markets in Saudi Arabia. These samples contain toxic elements like lead, cadmium and chromium which are carcinogen dermatitis, allergic and eczematous. Their extraction from human body takes over 40 years and accumulation in the body cause problems like disruption of nervous systems and kidney damage. They could trigger to systemic lupus erythematosus (SLE). In order to test the validity of our LIBS results, standard technique like (ICP-AES) was also applied. To the best of our knowledge, this is the first study where LIBS technique was applied for the measurement of toxic substances in lipsticks. The maximum concentration detected in four lipstick brands was much higher than the permissible safe limits for human use and could lead to serious health problems. It is worth mentioning that the lipstick is not a solid rather is in fluid state which is not trivial to analyze using LIBS technique. For this purpose, special treatment of the lipstick samples was necessary to analyze with our LIBS method.

  2. Analysis of antique bronze coins by Laser Induced Breakdown Spectroscopy and multivariate analysis

    Science.gov (United States)

    Bachler, M. Orlić; Bišćan, M.; Kregar, Z.; Jelovica Badovinac, I.; Dobrinić, J.; Milošević, S.

    2016-09-01

    This work presents a feasibility study of applying the Principal Component Analysis (PCA) to data obtained by Laser-Induced Breakdown Spectroscopy (LIBS) with the aim of determining correlation between different samples. The samples were antique bronze coins coated in silver (follis) dated in the Roman Empire period and were made during different rulers in different mints. While raw LIBS data revealed that in the period from the year 286 to 383 CE content of silver was constantly decreasing, the PCA showed that the samples can be somewhat grouped together based on their place of origin, which could be a useful hint when analysing unknown samples. It was also found that PCA can help in discriminating spectra corresponding to ablation from the surface and from the bulk. Furthermore, Partial Least Squares method (PLS) was used to obtain, based on a set of samples with known composition, an estimation of relative copper concentration in studied ancient coins. This analysis showed that copper concentration in surface layers ranged from 83% to 90%.

  3. Analysis of the silicone polymer surface aging profile with laser-induced breakdown spectroscopy

    Science.gov (United States)

    Wang, Xilin; Hong, Xiao; Wang, Han; Chen, Can; Zhao, Chenlong; Jia, Zhidong; Wang, Liming; Zou, Lin

    2017-10-01

    Silicone rubber composite materials have been widely used in high voltage transmission lines for anti-pollution flashover. The aging surface of silicone rubber materials decreases service properties, causing loss of the anti-pollution ability. In this paper, as an analysis method requiring no sample preparation that is able to be conducted on site and suitable for nearly all types of materials, laser-induced breakdown spectroscopy (LIBS) was used for the analysis of newly prepared and aging (out of service) silicone rubber composites. With scanning electron microscopy (SEM) and hydrophobicity test, LIBS was proven to be nearly non-destructive for silicone rubber. Under the same LIBS testing parameters, a linear relationship was observed between ablation depth and laser pulses number. With the emission spectra, all types of elements and their distribution in samples along the depth direction from the surface to the inner part were acquired and verified with EDS results. This research showed that LIBS was suitable to detect the aging layer depth and element distribution of the silicone rubber surface.

  4. Laser-induced breakdown spectroscopy analysis of complex silicate minerals--beryl.

    Science.gov (United States)

    McMillan, Nancy J; McManus, Catherine E; Harmon, Russell S; De Lucia, Frank C; Miziolek, Andrzej W

    2006-05-01

    Beryl (Be3Al2Si6O18) is a chemically complex and highly compositionally variable gem-forming mineral found in a variety of geologic settings worldwide. A methodology and analytical protocol were developed for the analysis of beryl by laser-induced breakdown spectroscopy (LIBS) that minimizes the coefficient of variance for multiple analyses of the same specimen. The parameters considered were laser energy/pulse, time delay and crystallographic orientation. Optimal analytical conditions are a laser energy/pulse of 102 mJ and a time delay of 2 micros. Beryl compositions measured parallel and perpendicular to the c axis were identical within analytical error. LIBS analysis of 96 beryls from 16 countries (Afghanistan, Brazil, Canada, China, Colombia, India, Ireland, Italy, Madagascar, Mexico, Mozambique, Namibia, Norway, Russia, Tanzania and United States), Antarctica, and ten US states (AZ, CA, CO, CT, ID, ME, NC, NH, NM and UT) were undertaken to determine whether or not LIBS analysis can be used to determine the provenance of gem beryl.

  5. Quantitative analysis of arsenic in mine tailing soils using double pulse-laser induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Kwak, Ji-hyun [Department of Environmental Science and Engineering, Gwangju Institute of Science and Technology (GIST), Gwangju 500-712 (Korea, Republic of); Lenth, Christoph; Salb, Christian [Photonic Sensor Technology, Laser-Laboratorium Goettingen e.V., Hans-Adolf-Krebs-Weg 1 D-37077 Goettingen (Germany); Ko, Eun-Joung; Kim, Kyoung-Woong [Department of Environmental Science and Engineering, Gwangju Institute of Science and Technology (GIST), Gwangju 500-712 (Korea, Republic of); Park, Kihong, E-mail: kpark@gist.ac.k [Department of Environmental Science and Engineering, Gwangju Institute of Science and Technology (GIST), Gwangju 500-712 (Korea, Republic of)

    2009-10-15

    A double pulse-laser induced breakdown spectroscopy (DP-LIBS) was used to determine arsenic (As) concentration in 16 soil samples collected from 5 different mine tailing sites in Korea. We showed that the use of double pulse laser led to enhancements of signal intensity (by 13% on average) and signal-to-noise ratio of As emission lines (by 165% on average) with smaller relative standard deviation compared to single pulse laser approach. We believe this occurred because the second laser pulse in the rarefied atmosphere produced by the first pulse led to the increase of plasma temperature and populations of exited levels. An internal standardization method using a Fe emission line provided a better correlation and sensitivity between As concentration and the DP-LIBS signal than any other elements used. The Fe was known as one of the major components in current soil samples, and its concentration varied not substantially. The As concentration determined by the DP-LIBS was compared with that obtained by atomic absorption spectrometry (AAS) to evaluate the current LIBS system. They are correlated with a correlation coefficient of 0.94. The As concentration by the DP-LIBS was underestimated in the high concentration range (>1000 mg-As/kg). The loss of sensitivity that occurred at high concentrations could be explained by self-absorption in the generated plasma.

  6. [Experimental study on chromium in gannan navel orange by laser-induced breakdown spectroscopy].

    Science.gov (United States)

    Xu, Yuan; Liu, Mu-Hua; Yao, Ming-Yin; Peng, Qiu-Mei; Chen, Tian-Bing; Zhang, Xu; Lin, Yong-Zeng

    2012-09-01

    It is a relatively new task to apply the laser induced breakdown spectroscopy (LIBS) to fruit samples. To apply LIBS technique in the field related to analysis of trace heavy metal element in fruits samples, we have done primary experiments using Gannan navel orange samples. The authors put the samples into different concentration gradient K2Cr2O7 solution and left it for 30 hours, and then we did the LIBS experiment, discriminated characteristic spectra of chromium element and recorded the peak intensity information. Weighing three grams of sample and determined chromium concentration in the samples by atomic absorption spectrophotometer using wet digestion. The calibration curve of the line intensities versus the concentrations of the Cr element was acquired by the Origin software. The authors found that the linear correlation coefficient is 0. 981 66. The calibration curve can be used for the quantitative analysis of chromium element with an unknown concentration in Gannan navel orange. The LIBS detection limit of Cr in the solution was 11.64 mg x g(-1) from the measured calibration curve. Experiment results showed that LIBS technique is a valid means for measuring and quantitatively analyzing the content of heavy metal elements in fruit samples.

  7. [A method for time-resolved laser-induced breakdown spectroscopy measurement].

    Science.gov (United States)

    Pan, Cong-Yuan; Han, Zhen-Yu; Li, Chao-Yang; Yu, Yun-Si; Wang, Sheng-Bo; Wang, Qiu-Ping

    2014-04-01

    Laser-Induced Breakdown Spectroscopy (LIBS) is strongly time related. Time-resolved LIBS measurement is an important technique for the research on laser induced plasma evolution and self-absorption of the emission lines. Concerning the temporal characteristics of LIBS spectrum, a method is proposed in the present paper which can achieve micros-scale time-resolved LIBS measurement by using general ms-scale detector. By setting different integration delay time of the ms-scale spectrum detector, a series of spectrum are recorded. And the integration delay time interval should be longer than the worst temporal precision. After baseline correction and spectrum fitting, the intensity of the character line was obtained. Calculating this intensity with differential method at a certain time interval and then the difference value is the time-resolved line intensity. Setting the plasma duration time as X-axis and the time-resolved line intensity as Y-axis, the evolution curve of the character line intensity can be plotted. Character line with overlap-free and smooth background should be a priority to be chosen for analysis. Using spectrometer with ms-scale integration time and a control system with temporal accuracy is 0.021 micros, experiments carried out. The results validate that this method can be used to characterize the evolution of LIBS characteristic lines and can reduce the cost of the time-resolved LIBS measurement system. This method makes high time-resolved LIBS spectrum measurement possible with cheaper system.

  8. Composition analysis of medieval ceramics by laser-induced breakdown spectroscopy (LIBS)

    Science.gov (United States)

    Genc Oztoprak, B.; Sinmaz, M. A.; Tülek, F.

    2016-05-01

    Laser-induced breakdown spectroscopy (LIBS) technique is expected to be one of the most preferred techniques in archaeology research since it does not disrupt the structural and chemical form of archaeological samples, and it is considered virtually nondestructive analysis method. In this work, LIBS is used for analyses of glaze, paint, and clay of medieval ceramics collected from East Plain Cilicia, Osmaniye Province during archaeological survey. Transparent glazed and colour-painted ceramics of the Islam and Byzantine pottery traditions are analysed to detect distinctive and common features of the chemical compositions of their glazes. The spectral lines of Islamic and Byzantine glazes indicate that their structures are same. However, strontium (Sr) is determined in the transparent glaze of Islamic ceramics. Elemental composition and homogeneity of paint on one of the sample are determined by LIBS analysis. Colour changes are related with composition differences of the paint content in the archaeological ceramic. In addition, the clay classification of archaeological ceramics taken from the Yapılıpınar mounds, Taşlıhöyük mounds, and Örenşehir ancient sites is done using PCA and PLS-DA chemometric techniques. According to the results of the classification, Yapılıpınar mounds terracotta ceramics differ from those of Taşlıhöyük and Örenşehir ancient sites.

  9. Testing a portable laser-induced breakdown spectroscopy system on geological samples

    Energy Technology Data Exchange (ETDEWEB)

    Rakovsky, Jozef, E-mail: jozef.rakovsky@fmph.uniba.sk [Laboratoire interdisciplinaire Carnot de Bourgogne, UMR 6303 CNRS, Universite de Bourgogne, 9 Av. A. Savary, BP 47 870, F-21078 Dijon Cedex (France); Department of Experimental Physics FMFI, Comenius University, Mlynska dolina, 842 48 Bratislava (Slovakia); Musset, Olivier [Laboratoire interdisciplinaire Carnot de Bourgogne, UMR 6303 CNRS, Universite de Bourgogne, 9 Av. A. Savary, BP 47 870, F-21078 Dijon Cedex (France); Buoncristiani, JeanFrancois [Laboratoire Biogeosciences, UMR CNRS 6282, Universite de Bourgogne, 6 Boulevard Gabriel 21000 Dijon (France); Bichet, Vincent [Laboratoire Chrono-Environnement, UMR CNRS 6249, Universite de Besancon, 16 Route de Gray 25000 Besancon (France); Monna, Fabrice [Laboratoire ARTeHIS, UMR CNRS 6298, Universite de Bourgogne, 6 Boulevard Gabriel 21000 Dijon (France); Neige, Pascal [Laboratoire Biogeosciences, UMR CNRS 6282, Universite de Bourgogne, 6 Boulevard Gabriel 21000 Dijon (France); Veis, Pavel [Department of Experimental Physics FMFI, Comenius University, Mlynska dolina, 842 48 Bratislava (Slovakia); State Geological Institute of Dionyz Stur, Mlynska dolina 1, 817 04 Bratislava 11 (Slovakia)

    2012-08-15

    This paper illustrates the potentialities of a home-made portable LIBS (laser-induced breakdown spectroscopy) instrument in Earth sciences, more particularly in geochemically recognizing (i) tephra layers in lacustrine sediments and (ii) fossilization processes in ammonites. Abundances for selected lines of Al, Ca, Fe, Ti, Ba and Na were determined in lacustrine chalk sediments of the Jura, where the Laacher See Tephra (LST) layer is recorded. A statistical treatment of elemental maps produced from the section of a sedimentary column containing the LST event allows instrumental conditions to be optimized. Accumulating spectra from close shot positions gives better results than multiplying shots at the same location. A depth profile method was applied to study ammonite fossilization (pyritization, phosphatization) processes. Depth variations of Fe, Ca, Al intensities, and Fe/Ca and Al/Ca ratios provide indications about pyritization, but phosphatization processes cannot be determined with our device. - Highlights: Black-Right-Pointing-Pointer Element cartography maps for sediment which contains tephra layer have been created. Black-Right-Pointing-Pointer The maps have been used for on-site conditions determination by statistical treatment. Black-Right-Pointing-Pointer Pyritization process on ammonite surface was identified successfully.

  10. Multi-elemental mapping of a speleothem using laser-induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Q.L.; Motto-Ros, V. [Universite de Lyon, Universite Lyon 1, Villeurbanne, CNRS, UMR5579, LASIM F-69622, Lyon (France); Lei, W.Q. [Universite de Lyon, Universite Lyon 1, Villeurbanne, CNRS, UMR5579, LASIM F-69622, Lyon (France); State Key Laboratory of Precision Spectroscopy, East China Normal University, Shanghai (China); Boueri, M. [Universite de Lyon, Universite Lyon 1, Villeurbanne, CNRS, UMR5579, LASIM F-69622, Lyon (France); Zheng, L.J.; Zeng, H.P. [State Key Laboratory of Precision Spectroscopy, East China Normal University, Shanghai (China); Bar-Matthews, M.; Ayalon, A. [Geological Survey of Israel, 30 Malkhei Israel St., Jerusalem (Israel); Panczer, G. [Universite de Lyon, Universite Lyon 1, Villeurbanne, CNRS UMR 5620, LPCML F-69622, Lyon (France); Yu, J., E-mail: jin.yu@lasim.univ-lyon1.f [Universite de Lyon, Universite Lyon 1, Villeurbanne, CNRS, UMR5579, LASIM F-69622, Lyon (France)

    2010-08-15

    Speleothems represent an important record of the paleoclimate, and more generally past environmental changes thanks to their laminar structure which is related to variations in rainfall and vegetation throughout the seasons and to their elemental as well as structural compositions which are sensitive to climatic and environmental conditions during their growth. Studies of their composition, especially those with spatial resolution, reveal rich information for paleoclimatology. In this paper, we demonstrate that laser-induced breakdown spectroscopy (LIBS) provides a suitable tool for elemental analysis and especially for 2-dimensional elemental mapping of speleothems. Main, minor, as well as trace elements can be analyzed with this technique. The temporal evolution of the induced plasma is first studied in order to determine a suitable detection window for emission spectrum recording following the impact of the laser pulse on the sample. The matrix effect is then evaluated with a scan on the sample surface by measuring the electron density and the temperature of the plasmas at different positions of the analyzed surface. Concentration mapping is performed for minor and trace elements such as Na, Mg, Al, Si, K, Fe and Sr, by measuring relative variations of line emission intensities from these elements. Finally, correlations in concentration among detected elements are determined. Groups of correlated elements can be attributed to different mineralogical phases.

  11. Analysis of gold in rock samples using laser-induced breakdown spectroscopy: Matrix and heterogeneity effects

    Science.gov (United States)

    Rifai, Kheireddine; Laflamme, Marcel; Constantin, Marc; Vidal, François; Sabsabi, Mohamad; Blouin, Alain; Bouchard, Paul; Fytas, Konstantinos; Castello, Maryline; Kamwa, Blandine Nguegang

    2017-08-01

    We used the laser-induced breakdown spectroscopy (LIBS) technique to determine the concentration of gold in rock samples. 44 reference materials (mostly compressed fine powders) of various chemical compositions, with a quasi-homogeneous concentration of gold varying from 0 to 1000 ppm, were used to establish the calibration curve for the Au I 267.59 nm line. A chemometric study based on the principal component analysis (PCA) showed that 83% of the LIBS spectra variations are attributable to the presence of iron in the samples. Two distinct branches were obtained in the calibration curve: one for Si-rich samples ( 13% of iron) with limits of detection of 0.8 ppm and 1.5 ppm, respectively. Different normalization schemes of the gold signal were tested in order to reduce the matrix effects. The LIBS analysis was performed on various mineral samples of practical interest, namely two Si-rich uncompressed ore powders, fine and granular, and three bulk drill cores. The fluctuations in the gold concentration measurements appear to be about two times greater in the granular powder (5-10%) than in the fine one (2-5%). A detailed mapping of the gold concentration on a solid drill core was also performed, revealing multiscale heterogeneity of the gold distribution on the surface of the sample.

  12. Laser-Induced Breakdown Spectroscopy Based Protein Assay for Cereal Samples.

    Science.gov (United States)

    Sezer, Banu; Bilge, Gonca; Boyaci, Ismail Hakki

    2016-12-14

    Protein content is an important quality parameter in terms of price, nutritional value, and labeling of various cereal samples. However, conventional analysis methods, namely, Kjeldahl and Dumas, have major drawbacks such as long analysis time, titration mistakes, and carrier gas dependence with high purity. For this reason, there is an urgent need for rapid, reliable, and environmentally friendly technologies for protein analysis. The present study aims to develop a new method for protein analysis in wheat flour and whole meal by using laser-induced breakdown spectroscopy (LIBS), which is a multielemental, fast, and simple spectroscopic method. Unlike the Kjeldahl and Dumas methods, it has potential to analyze a high number of samples in considerably short time. In the study, nitrogen peaks in LIBS spectra of wheat flour and whole meal samples with different protein contents were correlated with results of the standard Dumas method with the aid of chemometric methods. A calibration graph showed good linearity with the protein content between 7.9 and 20.9% and a 0.992 coefficient of determination (R(2)). The limit of detection was calculated as 0.26%. The results indicated that LIBS is a promising and reliable method with its high sensitivity for routine protein analysis in wheat flour and whole meal samples.

  13. Laser-induced breakdown spectroscopy analysis of human deciduous teeth samples.

    Science.gov (United States)

    Khalid, Arooj; Bashir, Shazia; Akram, Mahreen; Hayat, Asma

    2015-12-01

    Laser-induced breakdown spectroscopy (LIBS) analysis of human deciduous teeth has been performed by employing Nd:YAG laser (1064 nm, 10 ns) for the evaluation of plasma parameters as well as elemental analysis. The plasma parameters, i.e., electron temperature and electron number density of laser-induced teeth plasma at various fluencies, have been evaluated. Both parameters show an increasing trend up to a certain value of laser fluence, i.e., 2.6 J/cm(2). With further increase in laser fluence up to a value of 3.9 J/cm(2), a decreasing trend is observed which is due to shielding effect. With further increase in laser fluence up to a maximum value of 10.5 J/cm(2), the insignificant changes in plasma parameters are observed which are attributed to saturation phenomenon governed by self-regulating regime. Emission spectroscopy results exhibit that laser fluence is the controlling factor for both plasma parameters. The elemental analysis was also performed at constant laser fluence of 2.6 J/cm(2) by evaluating the variation in detected elemental concentration of Ca, Fe, Sr, Zn, and Pb in three different parts of human teeth, i.e., enamel, dentine, and cementum. The lower concentration of Ca as compared to the standard values of CaCO3 (self-fabricated pellet) reveals that enamel is the most deciduous part of the human teeth. However, at the same time, it is also observed that the highest concentration of micro minerals is also found in enamel, then in dentine, and lowest in cementum. Carious or unhealthy tooth is identified by enhanced concentration of micro minerals (Pb, Sr, Zn, and Fe). The highest concentration of micro minerals as compared to other parts of teeth (dentine and root cementum) and lower concentration of Ca as compared to standard CaCO3 pellet in enamel confirm that enamel is the most deciduous part of the teeth.

  14. Direct determination of the nutrient profile in plant materials by femtosecond laser-induced breakdown spectroscopy.

    Science.gov (United States)

    de Carvalho, Gabriel Gustinelli Arantes; Moros, Javier; Santos, Dário; Krug, Francisco José; Laserna, J Javier

    2015-05-30

    Femtosecond laser-induced breakdown spectroscopy (fs-LIBS) has been used for the first time for quantitative determination of nutrients in plant materials from different crops. A highly heterogeneous population of 31 samples, previously analyzed by inductively coupled plasma optical emission spectroscopy, covering a wide range of matrices was interrogated. To tackle the analysis, laser-induced plasmas under argon atmosphere of pellets prepared from sieved cryogenically ground leaves were studied. Predictive functions based on univariate and multivariate modeling of optical emissions associated to macro- (Ca, Mg, and P) and micronutrients (Cu, Fe, Mn and Zn) were designed. Hierarchical cluster analysis was performed to select representative calibration (n(cal)=17) and validation (n(val)=14) datasets. The predictive performance of calibration functions over fs-LIBS data was compared with that attained on spectral information from nanosecond LIBS (ns-LIBS) operating at different wavelengths (1064 nm, 532 nm, and 266 nm). Findings established higher accuracy and less uncertainty on mass fractions quantification from fs-LIBS, whatever the modeling approach. Quality coefficients below 20% for the accuracy error on mass fractions' prediction in unknown samples, and residual predictive deviations in general above 5, were obtained. In contrast, only multivariate modeling satisfactorily handled the non-linear variations of emissions in ns-LIBS, leading to 2-fold decrease in the root mean square error of prediction (RMSEP) of Ca, Mg, P, Cu, Fe, Mn and Zn in comparison with the univariate approach. But still, an averaged quality coefficient about 35% and residual predictive deviations below 3 were found. Similar predictive capabilities were observed when changing the laser wavelength. Although predicted values by ns-LIBS multivariate modeling exhibit better agreement with reference mass fractions as compared to univariate functions, fs-LIBS conducts better quantification of

  15. Preliminary design of laser-induced breakdown spectroscopy for proto-Material Plasma Exposure eXperiment.

    Science.gov (United States)

    Shaw, G; Martin, M Z; Martin, R; Biewer, T M

    2014-11-01

    Laser-induced breakdown spectroscopy (LIBS) is a technique for measuring surface matter composition. LIBS is performed by focusing laser radiation onto a target surface, ablating the surface, forming a plasma, and analyzing the light produced. LIBS surface analysis is a possible diagnostic for characterizing plasma-facing materials in ITER. Oak Ridge National Laboratory has enabled the initial installation of a laser-induced breakdown spectroscopy diagnostic on the prototype Material-Plasma Exposure eXperiment (Proto-MPEX), which strives to mimic the conditions found at the surface of the ITER divertor. This paper will discuss the LIBS implementation on Proto-MPEX, preliminary design of the fiber optic LIBS collection probe, and the expected results.

  16. Evaluation of the Nutritional Changes Caused by Huanglongbing (HLB) to Citrus Plants Using Laser-Induced Breakdown Spectroscopy.

    Science.gov (United States)

    Ranulfi, Anielle Coelho; Romano, Renan Arnon; Bebeachibuli Magalhães, Aida; Ferreira, Ednaldo José; Ribeiro Villas-Boas, Paulino; Marcondes Bastos Pereira Milori, Débora

    2017-07-01

    Huanglongbing (HLB) is the most recent and destructive bacterial disease of citrus and has no cure yet. A promising alternative to conventional methods is to use laser-induced breakdown spectroscopy (LIBS), a multi-elemental analytical technique, to identify the nutritional changes provoked by the disease to the citrus leaves and associate the mineral composition profile with its health status. The leaves were collected from adult citrus trees and identified by visual inspection as healthy, HLB-symptomatic, and HLB-asymptomatic. Laser-induced breakdown spectroscopy measurements were done in fresh leaves without sample preparation. Nutritional variations were evaluated using statistical tools, such as Student's t-test and analysis of variance applied to LIBS spectra, and the largest were found for Ca, Mg, and K. Considering the nutritional profile changes, a classifier induced by classification via regression combined with partial least squares regression was built resulting in an accuracy of 73% for distinguishing the three categories of leaves.

  17. Quantitative Analysis of Carbon Steel with Multi-Line Internal Standard Calibration Method Using Laser-Induced Breakdown Spectroscopy.

    Science.gov (United States)

    Pan, Congyuan; Du, Xuewei; An, Ning; Zeng, Qiang; Wang, Shengbo; Wang, Qiuping

    2016-04-01

    A multi-line internal standard calibration method is proposed for the quantitative analysis of carbon steel using laser-induced breakdown spectroscopy (LIBS). A procedure based on the method was adopted to select the best calibration curves and the corresponding emission lines pairs automatically. Laser-induced breakdown spectroscopy experiments with carbon steel samples were performed, and C, Cr, and Mn were analyzed via the proposed method. Calibration curves of these elements were constructed via a traditional single line internal standard calibration method and a multi-line internal standard calibration method. The calibration curves obtained were evaluated with the determination coefficient, the root mean square error of cross-validation, and the average relative error of cross-validation. All of the parameters were improved significantly with the proposed method. The results show that accurate and stable calibration curves can be obtained efficiently via the multi-line internal standard calibration method. © The Author(s) 2016.

  18. Comparison of the Detection Characteristics of Trace Species Using Laser-Induced Breakdown Spectroscopy and Laser Breakdown Time-of-Flight Mass Spectrometry

    Directory of Open Access Journals (Sweden)

    Zhenzhen Wang

    2015-03-01

    Full Text Available The rapid and precise element measurement of trace species, such as mercury, iodine, strontium, cesium, etc. is imperative for various applications, especially for industrial needs. The elements mercury and iodine were measured by two detection methods for comparison of the corresponding detection features. A laser beam was focused to induce plasma. Emission and ion signals were detected using laser-induced breakdown spectroscopy (LIBS and laser breakdown time-of-flight mass spectrometry (LB-TOFMS. Multi-photon ionization and electron impact ionization in the plasma generation process can be controlled by the pressure and pulse width. The effect of electron impact ionization on continuum emission, coexisting molecular and atomic emissions became weakened in low pressure condition. When the pressure was less than 1 Pa, the plasma was induced by laser dissociation and multi-photon ionization in LB-TOFMS. According to the experimental results, the detection limits of mercury and iodine in N2 were 3.5 ppb and 60 ppb using low pressure LIBS. The mercury and iodine detection limits using LB-TOFMS were 1.2 ppb and 9.0 ppb, which were enhanced due to different detection features. The detection systems of LIBS and LB-TOFMS can be selected depending on the condition of each application.

  19. Comparison of the Detection Characteristics of Trace Species Using Laser-Induced Breakdown Spectroscopy and Laser Breakdown Time-of-Flight Mass Spectrometry

    Science.gov (United States)

    Wang, Zhenzhen; Deguchi, Yoshihiro; Yan, Junjie; Liu, Jiping

    2015-01-01

    The rapid and precise element measurement of trace species, such as mercury, iodine, strontium, cesium, etc. is imperative for various applications, especially for industrial needs. The elements mercury and iodine were measured by two detection methods for comparison of the corresponding detection features. A laser beam was focused to induce plasma. Emission and ion signals were detected using laser-induced breakdown spectroscopy (LIBS) and laser breakdown time-of-flight mass spectrometry (LB-TOFMS). Multi-photon ionization and electron impact ionization in the plasma generation process can be controlled by the pressure and pulse width. The effect of electron impact ionization on continuum emission, coexisting molecular and atomic emissions became weakened in low pressure condition. When the pressure was less than 1 Pa, the plasma was induced by laser dissociation and multi-photon ionization in LB-TOFMS. According to the experimental results, the detection limits of mercury and iodine in N2 were 3.5 ppb and 60 ppb using low pressure LIBS. The mercury and iodine detection limits using LB-TOFMS were 1.2 ppb and 9.0 ppb, which were enhanced due to different detection features. The detection systems of LIBS and LB-TOFMS can be selected depending on the condition of each application. PMID:25769051

  20. Comparison of the detection characteristics of trace species using laser-induced breakdown spectroscopy and laser breakdown time-of-flight mass spectrometry.

    Science.gov (United States)

    Wang, Zhenzhen; Deguchi, Yoshihiro; Yan, Junjie; Liu, Jiping

    2015-03-11

    The rapid and precise element measurement of trace species, such as mercury, iodine, strontium, cesium, etc. is imperative for various applications, especially for industrial needs. The elements mercury and iodine were measured by two detection methods for comparison of the corresponding detection features. A laser beam was focused to induce plasma. Emission and ion signals were detected using laser-induced breakdown spectroscopy (LIBS) and laser breakdown time-of-flight mass spectrometry (LB-TOFMS). Multi-photon ionization and electron impact ionization in the plasma generation process can be controlled by the pressure and pulse width. The effect of electron impact ionization on continuum emission, coexisting molecular and atomic emissions became weakened in low pressure condition. When the pressure was less than 1 Pa, the plasma was induced by laser dissociation and multi-photon ionization in LB-TOFMS. According to the experimental results, the detection limits of mercury and iodine in N2 were 3.5 ppb and 60 ppb using low pressure LIBS. The mercury and iodine detection limits using LB-TOFMS were 1.2 ppb and 9.0 ppb, which were enhanced due to different detection features. The detection systems of LIBS and LB-TOFMS can be selected depending on the condition of each application.

  1. Handling machine breakdown for dynamic scheduling by a colony of cognitive agents in a holonic manufacturing framework

    Directory of Open Access Journals (Sweden)

    T. K. Jana

    2015-09-01

    Full Text Available There is an ever increasing need of providing quick, yet improved solution to dynamic scheduling by better responsiveness following simple coordination mechanism to better adapt to the changing environments. In this endeavor, a cognitive agent based approach is proposed to deal with machine failure. A Multi Agent based Holonic Adaptive Scheduling (MAHoAS architecture is developed to frame the schedule by explicit communication between the product holons and the resource holons in association with the integrated process planning and scheduling (IPPS holon under normal situation. In the event of breakdown of a resource, the cooperation is sought by implicit communication. Inspired by the cognitive behavior of human being, a cognitive decision making scheme is proposed that reallocates the incomplete task to another resource in the most optimized manner and tries to expedite the processing in view of machine failure. A metamorphic algorithm is developed and implemented in Oracle 9i to identify the best candidate resource for task re-allocation. Integrated approach to process planning and scheduling realized under Multi Agent System (MAS framework facilitates dynamic scheduling with improved performance under such situations. The responsiveness of the resources having cognitive capabilities helps to overcome the adverse consequences of resource failure in a better way.

  2. Ultra-short laser pulse ablation using shear-force feedback: Femtosecond laser induced breakdown spectroscopy feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Samek, Ota [ISAS-Institute for Analytical Sciences, Bunsen-Kirchhoff Str.11, 44139 Dortmund (Germany)]. E-mail: samek@ansci.de; Kurowski, Andre [ISAS-Institute for Analytical Sciences, Bunsen-Kirchhoff Str.11, 44139 Dortmund (Germany); Kittel, Silke [ISAS-Institute for Analytical Sciences, Bunsen-Kirchhoff Str.11, 44139 Dortmund (Germany); Kukhlevsky, Sergei [Institute of Physics, University of Pecs, Ifjusag u. 6, Pecs 7624 (Hungary); Hergenroeder, Roland [ISAS-Institute for Analytical Sciences, Bunsen-Kirchhoff Str.11, 44139 Dortmund (Germany)

    2005-08-31

    This work reports on a feasibility study of proximity ablation using femtosecond pulses. Ultra-short pulses were launched to a bare tapered optical fiber and delivered to the sample. The tip-sample distance was controlled by means of shear-force feedback. Consequently, ablation craters with submicrometer dimensions were obtained. Potential analytical applications for Laser Induced Breakdown Spectroscopy (LIBS) technique, such as e.g. inclusions in steel or bio cells, are suggested.

  3. Preliminary correlations of feature strength in spark-induced breakdown spectroscopy of bioaerosols with concentrations measured in laboratory analyses

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, Morgan S.; Bauer, Amy J. Ray

    2010-05-01

    We present preliminary results that show good correlation between elemental compositions of three bioaerosol samples, as measured in the laboratory by combustion analysis and with proton-induced x-ray emission and spark-induced breakdown spectroscopy signals integrated over the entire emission time profiles. Atomic (Ca, Al, Fe, and Si) and molecular features (CN, N2{sup +}, and OH) were observed compared to the laboratory data.

  4. Qualitative Analysis of Teeth and Evaluation of Amalgam Elements Penetration into Dental Matrix Using Laser Induced Breakdown Spectroscopy

    Science.gov (United States)

    Gazmeh, Meisam; Bahreini, Maryam; Tavassoli, Seyed Hassan; Asnaashari, Mohammad

    2015-01-01

    Introduction: In this study, laser induced breakdown spectroscopy (LIBS) is used for qualitative analysis of healthy and carious teeth. The technique of laser ablation is receiving increasing attention for applications in dentistry, specifically for the treatment of teeth such as drilling of micro-holes and plaque removal. Methods: A quality-switched (Q-switched) Neodymium-Doped Yttrium Aluminium Garnet (Nd:YAG) laser operating at wavelength of 1064 nm, pulse energy of 90 mJ/pulse, repetition rate of 2Hz and pulse duration of 6 ns was used in this analysis. In the process of ablation a luminous micro-plasma is normally generated which may be exploited for on-line elemental analysis via laser induced breakdown spectroscopy technique. We propose laser induced breakdown spectroscopy as a rapid, in situ and easy method for monitoring drilling process. Results: The results of elemental analysis show the presence of some trace elements in teeth including P, Ca, Mg, Zn, K, Sr, C, Na, H, O and the permeability of some amalgam (teeth filling materials) elements including Hg, Ag, Cu and Sn into dental matrix. Conclusion: This study addresses the ability of LIBS in elemental analysis of teeth and its feasibility in acute identification of healthy and carious teeth during drilling process for future clinical applications. PMID:25987971

  5. Importance of laser-induced breakdown spectroscopy for hard tissues (bone, teeth) and other calcified tissue materials.

    Science.gov (United States)

    Singh, Vivek K; Kumar, Vinay; Sharma, Jitendra

    2015-08-01

    Laser-induced breakdown spectroscopy (LIBS) as a sensitive optical technique capable of fast multielemental analysis proved to be a versatile tool in different applications. It became visible in the analytical atomic spectroscopy scene in the late 1980s and since then, its applications having been developed continuously in different field of science and technology including biomedical science. Here, we review the use and importance of LIBS for trace element determination in different calcified tissue materials. In this article, we have also reported a comprehensive review of the recent progress of biomedical applications of LIBS.

  6. Application of laser induced breakdown spectroscopy (LIBS) instrumentation for international safeguards

    Energy Technology Data Exchange (ETDEWEB)

    Barefield Ii, James E [Los Alamos National Laboratory; Clegg, Samuel M [Los Alamos National Laboratory; Lopez, Leon N [Los Alamos National Laboratory; Le, Loan A [Los Alamos National Laboratory; Veirs, D Kirk [Los Alamos National Laboratory; Browne, Mike [Los Alamos National Laboratory

    2010-01-01

    Advanced methodologies and improvements to current measurements techniques are needed to strengthen the effectiveness and efficiency of international safeguards. This need was recognized and discussed at a Technical Meeting on 'The Application of Laser Spectrometry Techniques in IAEA Safeguards' held at IAEA headquarters (September 2006). One of the principal recommendations from that meeting was the need to pursue the development of novel complementary access instrumentation based on Laser Induced Breakdown Spectroscopy (UBS) for the detection of gaseous and solid signatures and indicators of nuclear fuel cycle processes and associated materials'. Pursuant to this recommendation the Department of Safeguards (SG) under the Division of Technical Support (SGTS) convened the 'Experts and Users Advisory Meeting on Laser Induced Breakdown Spectroscopy (LIBS) for Safeguards Applications' also held at IAEA headquarters (July 2008). This meeting was attended by 12 LlBS experts from the Czech Republic, the European Commission, France, the Republic of South Korea, the United States of America, Germany, the United Kingdom of Great Britain, Canada, and Northern Ireland. Following a presentation of the needs of the IAEA inspectors, the LIBS experts agreed that needs as presented could be partially or fully fulfilled using LIBS instrumentation. Inspectors needs were grouped into the following broad categories: (1) Improvements to in-field measurements/environmental sampling; (2) Monitoring status of activities in Hot Cells; (3) Verify status of activity at a declared facility via process monitoring; and (4) Need for pre-screening of environmental samples before analysis. The primary tool employed by the IAEA to detect undeclared processes and activities at special nuclear material facilities and sites is environmental sampling. One of the objectives of the Next Generation Safeguards Initiative (NGSI) Program Plan calls for the development of advanced

  7. The Error Is the Clue: Breakdown In Human-Machine Interaction

    Science.gov (United States)

    2006-01-01

    prolonged vowel on line 35 above, utterance 16 in Figure1. After two unsuccessful attempts to book a train the user tries one more time. At that point she has...is because it is sought in fusion” writes Levinas in his essay “The Other in Proust” [10]. Levinas meant fusion of humans, of views, of perspectives... styles ’ or to get their hats and leave. Thus on one hand, we don’t need to work for fusion between humans and machines by frenetically trying to

  8. Application of distance correction to ChemCam laser-induced breakdown spectroscopy measurements

    Science.gov (United States)

    Mezzacappa, A.; Melikechi, N.; Cousin, A.; Wiens, R. C.; Lasue, J.; Clegg, S. M.; Tokar, R.; Bender, S.; Lanza, N. L.; Maurice, S.; Berger, G.; Forni, O.; Gasnault, O.; Dyar, M. D.; Boucher, T.; Lewin, E.; Fabre, C.

    2016-06-01

    Laser-induced breakdown spectroscopy (LIBS) provides chemical information from atomic, ionic, and molecular emissions from which geochemical composition can be deciphered. Analysis of LIBS spectra in cases where targets are observed at different distances, as is the case for the ChemCam instrument on the Mars rover Curiosity, which performs analyses at distances between 2 and 7.4 m is not a simple task. In our previous work we showed that spectral distance correction based on a proxy spectroscopic standard created from first-shot dust observations on Mars targets ameliorates the distance bias in multivariate-based elemental-composition predictions of laboratory data. In this work, we correct an expanded set of neutral and ionic spectral emissions for distance bias in the ChemCam data set. By using and testing different selection criteria to generate multiple proxy standards, we find a correction that minimizes the difference in spectral intensity measured at two different distances and increases spectral reproducibility. When the quantitative performance of distance correction is assessed, there is improvement for SiO2, Al2O3, CaO, FeOT, Na2O, K2O, that is, for most of the major rock forming elements, and for the total major-element weight percent predicted. However, for MgO the method does not provide improvements while for TiO2, it yields inconsistent results. In addition, we have observed that many emission lines do not behave consistently with distance, evidenced from laboratory analogue measurements and ChemCam data. This limits the effectiveness of the method.

  9. Development of a Laboratory Cement Quality Analysis Apparatus Based on Laser-Induced Breakdown Spectroscopy

    Science.gov (United States)

    Fan, Juanjuan; Zhang, Lei; Wang, Xin; Li, Yufang; Gong, Yao; Dong, Lei; Ma, Weiguang; Yin, Wangbao; Wang, Zhe; Li, Zheng; Zhang, Xiangjie; Li, Yi; Jia, Suotang

    2015-11-01

    Determination of the chemical composition of cement and ratio values of clinker plays an important role in cement plants as part of the optimal process control and product quality evaluation. In the present paper, a laboratory laser-induced breakdown spectroscopy (LIBS) apparatus mainly comprising a sealed optical module and an analysis chamber has been designed for possible application in cement plants for on-site quality analysis of cement. Emphasis is placed on the structure and operation of the LIBS apparatus, the sealed optical path, the temperature controlled spectrometer, the sample holder, the proper calibration model established for minimizing the matrix effects, and a correction method proposed for overcoming the ‘drift’ obstacle. Good agreement has been found between the laboratory measurement results from the LIBS method and those from the traditional method. The absolute measurement errors presented here for oxides analysis are within 0.5%, while those of ratio values are in the range of 0.02 to 0.05. According to the obtained results, this laboratory LIBS apparatus is capable of performing reliable and accurate, composition and proximate analysis of cement and is suitable for application in cement plants. supported by National Natural Science Foundation of China (Nos. 61127017, 61378047, 61205216, 61178009, 61108030, 61475093, and 61275213), the National Key Technology R&D Program of China (No. 2013BAC14B01), the 973 Program of China (No. 2012CB921603), the Shanxi Natural Science Foundation, China (Nos. 2013021004-1, 2012021022-1), and the Shanxi Scholarship Council of China (Nos. 2013-011 and 2013-01)

  10. Detection of visually unrecognizable braking tracks using Laser-Induced Breakdown Spectroscopy, a feasibility study

    Science.gov (United States)

    Prochazka, David; Bilík, Martin; Prochazková, Petra; Brada, Michal; Klus, Jakub; Pořízka, Pavel; Novotný, Jan; Novotný, Karel; Ticová, Barbora; Bradáč, Albert; Semela, Marek; Kaiser, Jozef

    2016-04-01

    Identification of the position, length and mainly beginning of a braking track has proven to be essential for determination of causes of a road traffic accident. With the introduction of modern safety braking systems and assistance systems such as the Anti-lock Braking System (ABS) or Electronic Stability Control (ESC), the visual identification of braking tracks that has been used up until the present is proving to be rather complicated or even impossible. This paper focuses on identification of braking tracks using a spectrochemical analysis of the road surface. Laser-Induced Breakdown Spectroscopy (LIBS) was selected as a method suitable for fast in-situ element detection. In the course of detailed observations of braking tracks it was determined that they consist of small particles of tire treads that are caught in intrusions in the road surface. As regards detection of the "dust" resulting from wear and tear of tire treads in the environment, organic zinc was selected as the identification element in the past. The content of zinc in tire treads has been seen to differ with regard to various sources and tire types; however, the arithmetic mean and modus of these values are approximately 1% by weight. For in-situ measurements of actual braking tracks a mobile LIBS device equipped with a special module was used. Several measurements were performed for 3 different cars and tire types respectively which slowed down with full braking power. Moreover, the influence of different initial speed, vehicle mass and braking track length on detected signal is discussed here.

  11. Laser-induced breakdown spectroscopy of dental lesions: diagnostic and therapeutic monitoring tool

    Science.gov (United States)

    Borisova, Ekaterina; Uzunov, Tzonko; Penev, Dimitar; Genova, Tsanislava; Avramov, Latchezar

    2016-01-01

    The carious decay develops a tiny area of demineralization on the enamel, which could be detected by element analytic techniques such as laser-induced breakdown spectroscopy (LIBS). That demineralization can quickly turn into a large lesion inside the tooth, it is often discovered too late to prevent the kind of decay that leads to cavities. The same optical LIBS detection approach could be used for monitoring of the caries removal using laser ablation or drilling techniques. For LIBS measurements we applied LIBS 2500Plus (Ocean Optics Inc., Dunedin, USA) system, which consists of seven spectrometric channels, covering spectral region from 200 to 980 nm, which optical resolution 0,05 nm, the spectrometers are connected with sample fiber bundle for 7-channels spectral system to the chamber for solid and liquid samples, Q-switched Nd:YAG laser, at 1 064 nm, with energy per pulse - 40 mJ, which is applied to induce plasma in the samples. LIBS spectra were obtained after single shot of the laser in the region of pathology. Samples investigated by LIBS are extracted teeth from patients, with periodontal problems on different stage of carious lesions, and their LIBS spectra are compared with the LIBS signals obtained from normal enamel and dentine tissues to receive complete picture of the carious lesion development. The major line of our investigations is related to the development of a methodology for real-time optical feedback control during selective ablation of tooth tissues using LIBS. Tooth structures, with and without pathological changes, are compared and their LIBS element analysis is used to differentiate major changes, which occur during tooth carious process and growth.

  12. Application of Laser Induced Breakdown Spectroscopy to the identification of emeralds from different synthetic processes

    Energy Technology Data Exchange (ETDEWEB)

    Agrosì, G. [Department of Scienze della Terra e Geoambientali, University of Bari, Bari (Italy); Tempesta, G., E-mail: gioacchino.tempesta@uniba.it [Department of Scienze della Terra e Geoambientali, University of Bari, Bari (Italy); Scandale, E. [Department of Scienze della Terra e Geoambientali, University of Bari, Bari (Italy); Legnaioli, S.; Lorenzetti, G.; Pagnotta, S.; Palleschi, V. [Institute of Chemistry of Organometallic Compounds, CNR, Pisa (Italy); Mangone, A. [Department of Chemistry, University of Bari, Bari (Italy); Lezzerini, M. [Department of Earth Sciences, University of Pisa, Pisa (Italy)

    2014-12-01

    Laser Induced Breakdown Spectroscopy can provide a useful contribution in mineralogical field in which the quantitative chemical analyses (including the evaluation of light elements) can play a key role in the studies on the origin of the emeralds. In particular, the chemical analyses permit to determine those trace elements, known as fingerprints, that can be useful to study their provenance. This technique, not requiring sample preparation results particularly suitable for gemstones, that obviously must be studied in a non-destructive way. In this paper, the LIBS technique was applied to distinguish synthetic emeralds grown by Biron hydrothermal method from those grown by Chatham flux method. The analyses performed by collinear double-pulse LIBS give a signal enhancement useful for the quantitative chemical analyses while guaranteeing a minimal sample damage. In this way it was obtained a considerable improvement on the detection limit of the trace elements, whose determination is essential for determining the origin of emerald gemstone. The trace elements V, Cr, and Fe and their relative amounts allowed the correct attribution of the manufacturer. Two different methods for quantitative analyses were used for this study: the standard Calibration-Free LIBS (CF-LIBS) method and its recent evolution, the One Point Calibration LIBS (OPC-LIBS). This is the first approach to the evaluation of the emerald origin by means of the LIBS technique. - Highlights: • A LIBS method for discrimination between synthetic emeralds is presented. • Only one standard of known composition is needed for the analysis. • A set of two kind of synthetic emeralds has been analyzed. • The cromophoric elements Cr, V and Fe amounts have been used to determine the origin of emerald gemstone.

  13. [The auto-focusing remote laser-induced breakdown spectroscopy system].

    Science.gov (United States)

    Han, Zhen-yu; Pan, Cong-yuan; An, Ning; Du, Xue-wei; Yu, Yun-si; Du, Liang-liang; Wang, Sheng-bo; Wang, Qiu-ping

    2015-02-01

    The present paper presents an auto-focus laser-induced breakdown spectroscopy (LIBS) remote measuring system. This system contains a Schwarzschild telescope, which consists of a convex mirror and a concave mirror. The two spherical mirrors are coaxially placed. The convex mirror is mounted on a motorized linear translation stage. With this motorized linear translation stage, the convex mirror can move along the optical axis to change the spacing between the convex mirror and the concave mirror. Therefore the focal length can be adjusted to focus the laser on samples at different distances and collect the plasma spectra. The advantages of the telescope system include, firstly, the light path of laser focusing and spectra signal collection is the same, which make it easier for mounting and collimation; secondly, the light path of the telescope uses total reflection type, which is fit for the detection in ultra-violate region; finally, the telescope consists of only two spherical mirrors which are relatively easier to manufacture. Within the translation range of the motorized linear translation stage, the focal length of the telescope in this paper can be adjusted from 1.5 to 3.6 m. The diameter of the focusing spot varies from 0.5 to 1.0 mm. Utilizing this telescope system, LIBS experiments were conducted using copper sample. And the characteristic lines of Cu element (Cu I 223.01 nm, Cu I 224.43 nm) obtained are used for the auto focusing. By investigating the relation of the area of spectral lines covered and the spacing between the mirrors, the optimal laser focusing location was obtained. The LIBS experiment results show that the system functions well, fulfilling the demand of remote ablation of sample and LIBS spectral measuring, and the telescope is able to auto-focus the laser on samples at different position to perform remote LIBS experiment.

  14. Quantification of trace metals in infant formula premixes using laser-induced breakdown spectroscopy

    Science.gov (United States)

    Cama-Moncunill, Raquel; Casado-Gavalda, Maria P.; Cama-Moncunill, Xavier; Markiewicz-Keszycka, Maria; Dixit, Yash; Cullen, Patrick J.; Sullivan, Carl

    2017-09-01

    Infant formula is a human milk substitute generally based upon fortified cow milk components. In order to mimic the composition of breast milk, trace elements such as copper, iron and zinc are usually added in a single operation using a premix. The correct addition of premixes must be verified to ensure that the target levels in infant formulae are achieved. In this study, a laser-induced breakdown spectroscopy (LIBS) system was assessed as a fast validation tool for trace element premixes. LIBS is a promising emission spectroscopic technique for elemental analysis, which offers real-time analyses, little to no sample preparation and ease of use. LIBS was employed for copper and iron determinations of premix samples ranging approximately from 0 to 120 mg/kg Cu/1640 mg/kg Fe. LIBS spectra are affected by several parameters, hindering subsequent quantitative analyses. This work aimed at testing three matrix-matched calibration approaches (simple-linear regression, multi-linear regression and partial least squares regression (PLS)) as means for precision and accuracy enhancement of LIBS quantitative analysis. All calibration models were first developed using a training set and then validated with an independent test set. PLS yielded the best results. For instance, the PLS model for copper provided a coefficient of determination (R2) of 0.995 and a root mean square error of prediction (RMSEP) of 14 mg/kg. Furthermore, LIBS was employed to penetrate through the samples by repetitively measuring the same spot. Consequently, LIBS spectra can be obtained as a function of sample layers. This information was used to explore whether measuring deeper into the sample could reduce possible surface-contaminant effects and provide better quantifications.

  15. Trace element quantification of lead based roof sheets of historical monuments by Laser Induced Breakdown Spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Syvilay, D., E-mail: delphine.syvilay@culture.gouv.fr [LRMH USR 3224, 29 rue de Paris, 77420 Champs-sur-Marne (France); Texier, A. [LRMH USR 3224, 29 rue de Paris, 77420 Champs-sur-Marne (France); Arles, A.; Gratuze, B. [IRAMAT, 3D, rue de la Férollerie, 45071 Orléans Cedex 2 (France); Wilkie-Chancellier, N.; Martinez, L.; Serfaty, S. [SATIE, UMR CNRS 8029, Université de Cergy-Pontoise, ENS Cachan, 95000 Cergy-Pontoise Cedex (France); Detalle, V. [LRMH USR 3224, 29 rue de Paris, 77420 Champs-sur-Marne (France)

    2015-01-01

    The aim of this paper is to identify the different periods of construction or restoration of the lead roof of a historic monument. Trace elements in a lead matrix can be a signature of the metallurgical processes, allowing identification of a specific time period for the production of the lead used to build the roof. The ability of LIBS (Laser Induced Breakdown Spectroscopy) to detect such trace elements in a lead matrix is therefore explored and checked by comparing its results with LA-ICP-MS as a reference method (Laser Ablation-Inductively Coupled Plasma-Mass Spectrometry). Concentrations of 263 samples were compared between LIBS and LA-ICP-MS data and their correlation was evaluated. Another way to compare their results is also suggested by combining PCA (Principal Component Analysis) and GIS (Geographic Information System). As a result statistical mappings were created, highlighting metallurgical groups of samples across the roof of the building. This innovative approach links concentration and spatial location resulting in an easily interpretable graphical presentation of the data. The results of both spectrometry methods lead to similar conclusions with distinctive areas of different lead compositions and by extension different lead dating across the roof. But since LIBS is portable we can conclude that it is a suitable and reliable instrument for in-situ applications on historic monuments. - Highlights: • Quantification of trace elements (Ag, Bi, Cu and Sn) in a lead matrix by LIBS and LA-ICP-MS • Low limit of detection for Ag, Bi, Cu and Sn by using LIBS portable instrumentation • Set up a specific data processing combining PCA and GIS for cultural heritage application • Comparison of LIBS and LA-ICP-MS results with 263 samples • 488 samples analyzed by LIBS.

  16. Wavelength dependence of laser induced breakdown spectroscopy (LIBS) on questioned document investigation.

    Science.gov (United States)

    Elsherbiny, Nany; Aied Nassef, O

    2015-07-01

    The fast and nearly non-destructive criteria of laser induced breakdown spectroscopy (LIBS) technique has been exploited for forensic purposes, specifically, document investigation. The dependence of the optical emission spectra of different black gel ink samples on the excitation laser wavelength, namely the visible wavelength at λ=532 nm and the IR wavelength at λ=1064 nm, was studied. The inks of thirty black gel-ink pens comprising ten brands were analyzed to determine the variation of the chemical composition of ink and to discriminate among them with minimum mass removal and minimum damage to the document's paper. Under the adopted experimental conditions, the ability of the visible LIBS to differentiate among the different ink samples was successful compared to IR LIBS at the same laser pulse energy (~25 mJ/pulse, laser fluence is ~1400J·cm(-2) for visible laser and ~1100J·cm(-2) for IR laser) which could be attributed to the IR absorption effects by the black ink. However, the visible LIBS produces deeper crater with respect to that produced by IR LIBS. Applying IR LIBS with higher pulse energy of ~87mJ (laser fluence is ~4100J·cm(-2)), identification and differentiation of the adopted samples was performed with producing a larger-diameter but superficial crater. The plasma parameters are discussed at the adopted experimental conditions. The results support the potential of LIBS technique using both the visible and IR lasers to be commercially developed for forensic document examination. Copyright © 2015 Forensic Science Society. Published by Elsevier Ireland Ltd. All rights reserved.

  17. Cross-sectional study of kidney stones by laser-induced breakdown spectroscopy.

    Science.gov (United States)

    Singh, V K; Rai, A K; Rai, P K; Jindal, P K

    2009-09-01

    We performed laser-induced breakdown spectroscopy (LIBS) for the in situ quantitative estimation of elemental constituents distributed in different parts of kidney stones obtained directly from patients by surgery. We did this by focusing the laser light directly on the center, shell, and surface of the stones to find the spatial distribution of the elements inside the stone. The elements detected in the stones were calcium, magnesium, manganese, copper, iron, zinc, strontium, sodium, potassium, carbon, hydrogen, nitrogen, oxygen, phosphorus, sulfur, and chlorine (Cl), etc. We optimized the LIBS signals by varying the laser energy from 10 mJ to 40 mJ to obtain the best signal-to-background and signal-to-noise ratios. We estimated the quantities of different elements in the stones by drawing calibration curves, plotting graphs of the analyte signal versus the absolute concentration of the elements in standard samples. The detection limits of the calibration curves were discussed. The concentrations of the different elements were found to be widely different in different stones found in different age groups of patients. It was observed that stones containing higher amounts of copper also possessed higher amounts of zinc. In general, the concentrations of trace elements present in the kidney stones decreased as we moved from center to shell and surface. Our results also revealed that the concentrations of elements present in the stones increased with the age of the patients. The results obtained from the calibration curves were compared with results from inductively coupled plasma mass spectrometry (ICP-MS). We also used the intensity ratios of different elemental lines to find the spatial distribution of different elements inside the kidney stones.

  18. A PLS model based on dominant factor for coal analysis using laser-induced breakdown spectroscopy.

    Science.gov (United States)

    Feng, Jie; Wang, Zhe; West, Logan; Li, Zheng; Ni, Weidou

    2011-07-01

    Thirty-three bituminous coal samples were utilized to test the application of laser-induced breakdown spectroscopy technique for coal elemental concentration measurement in the air. The heterogeneity of the samples and the pyrolysis or combustion of coal during the laser-sample interaction processes were analyzed to be the main reason for large fluctuation of detected spectra and low calibration quality. Compared with the generally applied normalization with the whole spectral area, normalization with segmental spectral area was found to largely improve the measurement precision and accuracy. The concentrations of major element C in coal were determined by a novel partial least squares (PLS) model based on dominant factor. Dominant C concentration information was taken from the carbon characteristic line intensity since it contains the most-related information, even if not accurately. This dominant factor model was further improved by inducting non-linear relation by partially modeling the inter-element interference effect. The residuals were further corrected by PLS with the full spectrum information. With the physical-principle-based dominant factor to calculate the main quantitative information and to partially explicitly include the non-linear relation, the proposed PLS model avoids the overuse of unrelated noise to some extent and becomes more robust over a wider C concentration range. Results show that RMSEP in the proposed PLS model decreased to 4.47% from 5.52% for the conventional PLS with full spectrum input, while R(2) remained as high as 0.999, and RMSEC&P was reduced from 3.60% to 2.92%, showing the overall improvement of the proposed PLS model.

  19. Characterization and forensic analysis of soil samples using laser-induced breakdown spectroscopy (LIBS).

    Science.gov (United States)

    Jantzi, Sarah C; Almirall, José R

    2011-07-01

    A method for the quantitative elemental analysis of surface soil samples using laser-induced breakdown spectroscopy (LIBS) was developed and applied to the analysis of bulk soil samples for discrimination between specimens. The use of a 266 nm laser for LIBS analysis is reported for the first time in forensic soil analysis. Optimization of the LIBS method is discussed, and the results compared favorably to a laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) method previously developed. Precision for both methods was <10% for most elements. LIBS limits of detection were <33 ppm and bias <40% for most elements. In a proof of principle study, the LIBS method successfully discriminated samples from two different sites in Dade County, FL. Analysis of variance, Tukey's post hoc test and Student's t test resulted in 100% discrimination with no type I or type II errors. Principal components analysis (PCA) resulted in clear groupings of the two sites. A correct classification rate of 99.4% was obtained with linear discriminant analysis using leave-one-out validation. Similar results were obtained when the same samples were analyzed by LA-ICP-MS, showing that LIBS can provide similar information to LA-ICP-MS. In a forensic sampling/spatial heterogeneity study, the variation between sites, between sub-plots, between samples and within samples was examined on three similar Dade sites. The closer the sampling locations, the closer the grouping on a PCA plot and the higher the misclassification rate. These results underscore the importance of careful sampling for geographic site characterization.

  20. Effect of atmosphere on collinear double-pulse laser-induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Andrew J. Effenberger, Jr.; Jill R. Scott

    2010-09-01

    Double pulse laser induced breakdown spectroscopy (DP-LIBS) has been shown to enhance LIBS spectra. Several researches have reported significant increases in signal-to-noise and or spectral intensity [1-4]. In addition to DP-LIBS, atmospheric conditions can also increase spectra intensity. For example, Iida [5] found that He and Ar both increase LIBS intensity compared to air at one 1 atm. It was also found that as the pressure was decreased to 100 Torr, LIBS intensity increased in Ar and air for single pulse (SP) LIBS. In this study, a collinear DP-LIBS scheme is used along with manipulation of the atmospheric conditions. The DP-LIBS scheme consists of a 355 nm ablative pulse fired into a sample contained in a vacuum chamber. A second analytical 1064 nm pulse is then fired 100 ns to 10 µs after and along the same path of the first pulse. Ar, He and air at pressures ranging from atmospheric pressure (630 Torr at elevation) to 10-5 Torr are introduced during DP-LIBS and SP-LIBS experiments. For a brass sample, a significant increase in spectral intensity of Cu and Zn lines were observed in DP-LIBS under Ar compared to DP-LIBS in air (Figure 1). It was also found that Cu and Zn lines acquired with SP-LIBS in Ar are nearly as intense as DP-LIBS in air. Signal-to-noise for lines from various samples will be reported for both DP-LIBS and SP-LIBS in Ar, He, and air at pressures ranging from 630 Torr to 10-5 Torr.

  1. Forensic application of laser-induced breakdown spectroscopy for the discrimination of questioned documents.

    Science.gov (United States)

    Lennard, Chris; El-Deftar, Moteaa M; Robertson, James

    2015-09-01

    Document examination is an important forensic discipline and the legal system regularly needs the knowledge and skills of the scientific expert when questioned documents are involved in criminal or civil matters. Amongst the many aspects of the scientific examination of documents, elemental analysis can provide useful results. In this study, the evaluation of the analytical performance of a commercially available laser-induced breakdown spectroscopy (LIBS) instrument was conducted on office papers, writing inks, inkjet inks and laser printer toners. The paper sample set analysed consisted of 33 Australian paper specimens originating from the same production plant but representing different brands and/or batches. In addition, a total of 131 ink or toner samples were examined that included black and blue ballpoint inks, black inkjet inks, and black laser printer toners originating from several manufacturing sources, models and/or batches. Results from the LIBS method were compared against those obtained using more established elemental profiling method such as laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). LIBS demonstrated detectable and significant differences between different batches of the same brand as well as between different brands of paper, ink and toner samples. The LIBS method provided comparable discrimination powers for the selected sample sets when compared to those obtained using LA-ICP-MS (discrimination from 99.8 and 100% of the sample pairs, depending on the sample subset under examination). LIBS is a suitable technique for the determination of elemental composition as part of a protocol for the examination of questioned documents.

  2. Laser-induced breakdown spectroscopy: Extending its application to soil pH measurements

    Science.gov (United States)

    Ferreira, Edilene Cristina; Gomes Neto, José A.; Milori, Débora M. B. P.; Ferreira, Ednaldo José; Anzano, Jesús Manuel

    2015-08-01

    Acid-base equilibria are involved in almost all the processes that occur in soil. The bioavailability of nutrients for plants, for instance, depends on the solubilization of mineral nutrients in the soil solution, which is a pH-dependent process. The determination of pH in soil solutions is usually carried out by potentiometry using a glass membrane electrode, after extracting some of the soil components with water or CaCl2 solution. The present work describes a simple method for determining the pH of soil, using laser-induced breakdown spectroscopy (LIBS). Sixty samples presenting different textural composition and pH (previously determined by potentiometry) were employed. The samples were divided into a calibration set with fifty samples and a validation set with ten samples. LIBS spectra were recorded for each pelleted sample using laser pulse energy of 115 mJ. The intensities of thirty-two emission lines for Al, Ca, H, and O were used to fit a partial least squares (PLS) model. The model was validated by prediction of the pH of the validation set samples, which showed good agreement with the reference values. The prediction mean absolute error was 0.3 pH units and the root mean square error of the prediction was 0.4. These results highlight the potential of LIBS for use in other applications beyond elemental composition determinations. For soil analysis, the proposed method offers the possibility of determining pH, in addition to nutrients and contaminants, using a single LIBS measurement.

  3. Hydrogen isotope detection in metal matrix using double-pulse laser-induced breakdown-spectroscopy

    Science.gov (United States)

    Fantoni, Roberta; Almaviva, Salvatore; Caneve, Luisa; Colao, Francesco; Maddaluno, Giorgio; Gasior, Pawel; Kubkowska, Monika

    2017-03-01

    The amount of hydrogen isotopes retained in plasma facing components (PFCs) and the determination of their surface layer composition are among the most critical issues for the next generation fusion device, ITER, under construction in Cadarache (France). Laser Induced Breakdown Spectroscopy (LIBS) is currently under evaluation as a technique suitable for quantitative, in situ, non-invasive measurements of these quantities. In order to detect traces of contaminant in metallic samples and improve its limit of detection (LOD), the Double Pulse LIBS (DP-LIBS) variant can be used instead of the standard Single Pulse LIBS (SP-LIBS), as it has been proven by several authors that DP-LIBS can considerably raise the analytical performances of the technique. In this work Mo samples coated with a 1.5-1.8 μm thick W-Al mixed layer, contaminated with co-deposited deuterium (D) were measured by SP- and DP-LIBS under vacuum (p 5 × 10- 5 mbar), with an experimental set-up simulating conditions that can be found in a real fusion device between plasma discharges. A partial Calibration Free procedure (pCF) was applied to the LIBS data in order to retrieve the relative concentration of W and Al in the mixed layer. The amount of deuterium was then inferred by using tungsten as internal standard, accounting for the intensity ratio between the Dα line and nearby W I lines. The results are in satisfactory agreement with those obtained from preliminary Ion Beam Analysis measurements performed immediately after the specimen's realization.

  4. Laser-induced optical breakdown spectroscopy of polymer materials based on evaluation of molecular emission bands

    Science.gov (United States)

    Trautner, Stefan; Jasik, Juraj; Parigger, Christian G.; Pedarnig, Johannes D.; Spendelhofer, Wolfgang; Lackner, Johannes; Veis, Pavel; Heitz, Johannes

    2017-03-01

    Laser-induced breakdown spectroscopy (LIBS) for composition analysis of polymer materials results in optical spectra containing atomic and ionic emission lines as well as molecular emission bands. In the present work, the molecular bands are analyzed to obtain spectroscopic information about the plasma state in an effort to quantify the content of different elements in the polymers. Polyethylene (PE) and a rubber material from tire production are investigated employing 157 nm F2 laser and 532 nm Nd:YAG laser ablation in nitrogen and argon gas background or in air. The optical detection reaches from ultraviolet (UV) over the visible (VIS) to the near infrared (NIR) spectral range. In the UV/VIS range, intense molecular emissions, C2 Swan and CN violet bands, are measured with an Echelle spectrometer equipped with an intensified CCD camera. The measured molecular emission spectra can be fitted by vibrational-rotational transitions by open access programs and data sets with good agreement between measured and fitted spectra. The fits allow determining vibrational-rotational temperatures. A comparison to electronic temperatures Te derived earlier from atomic carbon vacuum-UV (VUV) emission lines show differences, which can be related to different locations of the atomic and molecular species in the expanding plasma plume. In the NIR spectral region, we also observe the CN red bands with a conventional CDD Czerny Turner spectrometer. The emission of the three strong atomic sulfur lines between 920 and 925 nm is overlapped by these bands. Fitting of the CN red bands allows a separation of both spectral contributions. This makes a quantitative evaluation of sulfur contents in the start material in the order of 1 wt% feasible.

  5. Signal enhancement in collinear double-pulse laser-induced breakdown spectroscopy applied to different soils

    Energy Technology Data Exchange (ETDEWEB)

    Nicolodelli, Gustavo, E-mail: gunicolodelli@hotmail.com [Embrapa Instrumentation, Rua XV de Novembro, 1452, CEP 13560-970 São Carlos, SP (Brazil); Senesi, Giorgio Saverio, E-mail: giorgio.senesi@imip.cnr.it [Institute of Inorganic Methodologies and Plasmas, CNR, Bari, 70126 Bari (Italy); Romano, Renan Arnon, E-mail: renan.romano@gmail.com [Embrapa Instrumentation, Rua XV de Novembro, 1452, CEP 13560-970 São Carlos, SP (Brazil); Physics Institute of São Carlos, University of São Paulo, IFSC-USP, Av. Trabalhador são-carlense, 400 Pq. Arnold Schimid, 13566-590 São Carlos, SP (Brazil); Oliveira Perazzoli, Ivan Luiz de, E-mail: ivanperazzoli@hotmail.com [Embrapa Instrumentation, Rua XV de Novembro, 1452, CEP 13560-970 São Carlos, SP (Brazil); Milori, Débora Marcondes Bastos Pereira, E-mail: debora.milori@embrapa.br [Embrapa Instrumentation, Rua XV de Novembro, 1452, CEP 13560-970 São Carlos, SP (Brazil)

    2015-09-01

    Laser-induced breakdown spectroscopy (LIBS) is a well-known consolidated analytical technique employed successfully for the qualitative and quantitative analysis of solid, liquid, gaseous and aerosol samples of very different nature and origin. Several techniques, such as dual-pulse excitation setup, have been used in order to improve LIBS's sensitivity. The purpose of this paper was to optimize the key parameters as excitation wavelength, delay time and interpulse, that influence the double pulse (DP) LIBS technique in the collinear beam geometry when applied to the analysis at atmospheric air pressure of soil samples of different origin and texture from extreme regions of Brazil. Additionally, a comparative study between conventional single pulse (SP) LIBS and DP LIBS was performed. An optimization of DP LIBS system, choosing the correct delay time between the two pulses, was performed allowing its use for different soil types and the use of different emission lines. In general, the collinear DP LIBS system improved the analytical performances of the technique by enhancing the intensity of emission lines of some elements up to about 5 times, when compared with conventional SP-LIBS, and reduced the continuum emission. Further, the IR laser provided the best performance in re-heating the plasma. - Highlights: • The correct choice of the delay time between the two pulses is crucial for the DP system. • An optimization of DP LIBS system was performed allowing its use for different soil and the use of different emission lines. • The DP LIBS system improved the analytical performances of the technique up to about 5 times, when compared with SP LIBS. • The IR laser provided the best performance in re-heating the plasma.

  6. Laser-Induced Breakdown Spectroscopy Technique in Identification of Ancient Ceramics Bodies and Glazes

    Science.gov (United States)

    Elsayed, Khaled; Imam, Hisham; Madkour, Fatma; Meheina, Galila; Gamal, Yosr

    2011-06-01

    In this paper we report a study on Laser Induced Breakdown Spectroscopy (LIBS) as a promising non-destructive technique for the identification of the colored glazes, and clay's bodies of Fatimid ceramics ancient artifacts. The scientific examination of ceramics may be helpful in unraveling the history of ancient shards, particularly as the process of its production such as firing condition and temperatures. The analysis of pottery, ceramic bodies and glazed coatings is required in order to structure the conservation or restoration of a piece. Revealing the technical skills of ancient potters has been one of the most important issues for gaining a deep insight of bygone culture and also it is required in order to structure the conservation or restoration of a piece of art. LIBS measurements were carried out by focusing a Nd-YAG laser at 1064 nm with pulse width of 10 ns and 50 mJ pulse energy on the surface of the sample by a 100-mm focal length lens. The plasma emission was collected by telescopic system and transferred through a fiber to Echelle spectrometer attached to an ICCD camera. The focal spot diameter is found to be in the range of 100-150 μm. which is small enough to consider this technique as a non-destructive technique. LIBS technique clarified that each piece of archaeological objects has its own finger print. X-ray diffraction (XRD) analysis was carried out on these archaeological ceramic body samples to study raw materials such as clays, which allowed the investigation of the crystal structure and showed the changes in its structure through firing process. This provided information on the ceramic characteristic and composition of the ceramic bodies.

  7. Detection of tire tread particles using laser-induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Prochazka, David, E-mail: prochazka.d@fme.vutbr.cz [Brno University of Technology, Institute of Physical Engineering, Technická 2, 616 00 Brno (Czech Republic); Brno University of Technology, Central European Institute of Technology, Technická 3058/10, CZ-616 00 Brno (Czech Republic); Bilík, Martin [Brno University of Technology, Institute of Forensic Engineering, Údolní 244/53, 602 00 Brno (Czech Republic); Prochazková, Petra [Masaryk University, Faculty of Science, Department of Chemistry, Kamenice 735/5, 625 00 Brno (Czech Republic); Klus, Jakub; Pořízka, Pavel; Novotný, Jan [Brno University of Technology, Central European Institute of Technology, Technická 3058/10, CZ-616 00 Brno (Czech Republic); Novotný, Karel [Masaryk University, Faculty of Science, Department of Chemistry, Kamenice 735/5, 625 00 Brno (Czech Republic); Brno University of Technology, Central European Institute of Technology, Technická 3058/10, CZ-616 00 Brno (Czech Republic); Ticová, Barbora [Masaryk University, Faculty of Science, Department of Chemistry, Kamenice 735/5, 625 00 Brno (Czech Republic); Bradáč, Albert; Semela, Marek [Brno University of Technology, Institute of Forensic Engineering, Údolní 244/53, 602 00 Brno (Czech Republic); and others

    2015-06-01

    The objective of this paper is a study of the potential of laser induced breakdown spectroscopy (LIBS) for detection of tire tread particles. Tire tread particles may represent pollutants; simultaneously, it is potentially possible to exploit detection of tire tread particles for identification of optically imperceptible braking tracks at locations of road accidents. The paper describes the general composition of tire treads and selection of an element suitable for detection using the LIBS method. Subsequently, the applicable spectral line is selected considering interferences with lines of elements that might be present together with the detected particles, and optimization of measurement parameters such as incident laser energy, gate delay and gate width is performed. In order to eliminate the matrix effect, measurements were performed using 4 types of tires manufactured by 3 different producers. An adhesive tape was used as a sample carrier. The most suitable adhesive tape was selected from 5 commonly available tapes, on the basis of their respective LIBS spectra. Calibration standards, i.e. an adhesive tape with different area content of tire tread particles, were prepared for the selected tire. A calibration line was created on the basis of the aforementioned calibration standards. The linear section of this line was used for determination of the detection limit value applicable to the selected tire. Considering the insignificant influence of matrix of various types of tires, it is possible to make a simple recalculation of the detection limit value on the basis of zinc content in a specific tire. - Highlights: • LIBS experimental measurement parameters for tire tread particles were optimize. • Calibration curve was prepared. • Limit of detection was determined.

  8. Nondestructive Determination of Cu Residue in Orange Peel by Laser Induced Breakdown Spectroscopy

    Science.gov (United States)

    Hu, Huiqin; Huang, Lin; Liu, Muhua; Chen, Tianbing; Yang, Ping; Yao, Mingyin

    2015-08-01

    Laser induced breakdown spectroscopy (LIBS) is an emerging tool with rapid, nondestructive, green characteristics in qualitative or quantitative analyses of composition in materials. But LIBS has its shortcomings in detect limit and sensitivity. In this work, heavy metal Cu in Gannan Navel Orange, which is one of famous fruits from Jiangxi of China, was analyzed. In view of LIBS's limit, it is difficult to determinate heavy metals in natural fruits. In this work, nine orange samples were pretreated in 50-500 μg/mL Cu solution, respectively. Another one orange sample was chosen as a control group without any pollution treatment. Previous researchers observed that the content of heavy metals is much higher in peel than in pulp. So, the content in pulp can be reflected by detecting peel. The real concentrations of Cu in peels were acquired by atomic absorption spectrophotometer (AAS). A calibration model of Cu I 324.7 and Cu I 327.4 was constructed between LIBS intensity and AAS concentration by six samples. The correlation coefficient of the two models is also 0.95. All of the samples were used to verify the accuracy of the model. The results show that the relative error (RE) between predicted and real concentration is less than 6.5%, and Cu I 324.7 line has smaller RE than Cu I 327.4. The analysis demonstrated that different characteristic lines decided different accuracy. The results prove the feasibility of detecting heavy metals in fruits by LIBS. But the results are limited in treated samples. The next work will focus on direct analysis of heavy metals in natural fruits without any pretreatment. This work is helpful to explore the distribution of heavy metals between pulp and peel. supported by National Natural Science Foundation of China (No. 31460419) and Major Project of Science and Technology of Jiangxi, China (No. 20143ACB21013)

  9. Optical emission enhancement in laser-induced breakdown spectroscopy using micro-torches

    Science.gov (United States)

    Liu, L.; Huang, X.; Li, S.; Lu, Yao; Chen, K.; Lu, Y. F.

    2016-03-01

    A cost effective method for optical emission enhancement in laser-induced breakdown spectroscopy (LIBS) has been proposed in this research. The pulsed Nd:YAG laser with a wavelength of 532 nm was used for sample ablation and plasma generation. A cost effective commercial butane micro-torch was put parallel to the sample surface to generate a small flame above the surface. The laser-induced plasma expanded in the flame environment. The time-resolved optical emission intensity and signal-to-noise ratio (SNR) have been observed with and without micro torch. For laser with pulse energy of 20 mJ, the relationship between optical emission intensity and delay time indicates that signal intensities have been greatly enhanced in the initial several microseconds when using micro torch. The time-resolved study of signal-to-noise ratio shows that the maximum SNR occurs at the delay time of 2 μs. The laser energy effects on the enhancements of optical emission intensity and SNR have also been analyzed, which indicates that the enhancement factors are both delay time and laser energy dependent. The maximum enhancement factors for both optical emission intensity and SNR gradually decreases with the laser energy increase. The limits of detection (LODs) for aluminum (Al) and molybdenum (Mo) in steel have been estimated, which shows that the detection sensitivity has been improved by around 4 times. The LODs of Al and Mo have been reduced from 18 to 6 ppm and from 110 to 36 ppm in LIBS, respectively. The method of LIBS by a micro torch has been demonstrated to be a cost effective method for detection sensitivity improvement, especially in the situation of low laser pulse energy.

  10. Laser-induced breakdown spectroscopy for the remote detection of explosives at level of fingerprints

    Science.gov (United States)

    Almaviva, S.; Palucci, A.; Lazic, V.; Menicucci, I.; Nuvoli, M.; Pistilli, M.; De Dominicis, L.

    2016-04-01

    We report the results of the application of Laser-Induced Breakdown Spectroscopy (LIBS) for the detection of some common military explosives and theirs precursors deposited on white varnished car's external and black car's internal or external plastic. The residues were deposited by an artificial silicon finger, to simulate material manipulation by terrorists when preparing a car bomb, leaving traces of explosives on the parts of a car. LIBS spectra were acquired by using a first prototype laboratory stand-off device, developed in the framework of the EU FP7 313077 project EDEN (End-user driven DEmo for CBRNe). The system operates at working distances 8-30 m and collects the LIBS in the spectral range 240-840 nm. In this configuration, the target was moved precisely in X-Y direction to simulate the scanning system, to be implemented successively. The system is equipped with two colour cameras, one for wide scene view and another for imaging with a very high magnification, capable to discern fingerprints on a target. The spectral features of each examined substance were identified and compared to those belonging to the substrate and the surrounding air, and those belonging to possible common interferents. These spectral differences are discussed and interpreted. The obtained results show that the detection and discrimination of nitro-based compounds like RDX, PETN, ammonium nitrate (AN), and urea nitrate (UN) from organic interfering substances like diesel, greasy lubricants, greasy adhesives or oils in fingerprint concentration, at stand-off distance of some meters or tenths of meters is feasible.

  11. Optimal emission enhancement in orthogonal double-pulse laser-induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Sanginés, R. [Centro de Ciencias Aplicadas y Desarrollo Tecnológico, Universidad Nacional Autónoma de México (CCADET-UNAM), Apartado Postal 70-186, México, DF 04510 (Mexico); Cátedra CONACyT, Centro de Nanociencias y Nanotecnología, Universidad Nacional Autónoma de México, Apartado Postal 14, Ensenada, BC 22800 (Mexico); Contreras, V. [Department of Physics, Tampere University of Technology, P.O. Box 692, FI-33101 Tampere (Finland); Sobral, H., E-mail: martin.sobral@ccadet.unam.mx [Centro de Ciencias Aplicadas y Desarrollo Tecnológico, Universidad Nacional Autónoma de México (CCADET-UNAM), Apartado Postal 70-186, México, DF 04510 (Mexico); Robledo-Martinez, A. [Universidad Autónoma Metropolitana-Unidad Azcapotzalco, Av. San Pablo 180, Azcapotzalco, México, DF 02200 (Mexico)

    2015-08-01

    Orthogonal double-pulse (DP) laser-induced breakdown spectroscopy (LIBS) was performed using reheating and pre-ablative configurations. The ablation pulse power density was varied by two orders of magnitude and the DP experiments were carried out for a wide range of interpulse delays. For both DP-LIBS schemes, the signal enhancement was evaluated with respect to the corresponding single-pulse (SP) LIBS as a function of the interpulse delay. The reheating scheme shows a sharp maximum signal enhancement of up to 200-fold for low ablative power densities (0.4 GW cm{sup −2}); however, for power densities larger than 10 GW cm{sup −2} this configuration did not improve the SP outcome. On the other hand, a more uniform signal enhancement of about 4–6 was obtained for the pre-ablative scheme nearly independently of the used ablative power density. In terms of the signal-to-noise ratio (SNR) the pre-ablative scheme shows a monotonic increment with the ablative power density. Whereas the reheating configuration reaches a maximum at 2.2 GW cm{sup −2}, its enhancement effect collapses markedly for fluencies above 10 GW cm{sup −2}. - Highlights: • Comparison of reheating and pre-ablative double-pulse LIBS was done using a wide range of ablation power densities. • Experimental parameters that could achieve optimal signal-to-noise ratio were investigated. • A reheating scheme is better for low-ablation power densities. • A pre-ablative configuration is better for high-ablation power densities.

  12. [High Precision Identification of Igneous Rock Lithology by Laser Induced Breakdown Spectroscopy].

    Science.gov (United States)

    Wang, Chao; Zhang, Wei-gang; Yan, Zhi-quan

    2015-09-01

    In the field of petroleum exploration, lithology identification of finely cuttings sample, especially high precision identification of igneous rock with similar property, has become one of the geological problems. In order to solve this problem, a new method is proposed based on element analysis of Laser-Induced Breakdown Spectroscopy (LIBS) and Total Alkali versus Silica (TAS) diagram. Using independent LIBS system, factors influencing spectral signal, such as pulse energy, acquisition time delay, spectrum acquisition method and pre-ablation are researched through contrast experiments systematically. The best analysis conditions of igneous rock are determined: pulse energy is 50 mJ, acquisition time delay is 2 μs, the analysis result is integral average of 20 different points of sample's surface, and pre-ablation has been proved not suitable for igneous rock sample by experiment. The repeatability of spectral data is improved effectively. Characteristic lines of 7 elements (Na, Mg, Al, Si, K, Ca, Fe) commonly used for lithology identification of igneous rock are determined, and igneous rock samples of different lithology are analyzed and compared. Calibration curves of Na, K, Si are generated by using national standard series of rock samples, and all the linearly dependent coefficients are greater than 0.9. The accuracy of quantitative analysis is investigated by national standard samples. Element content of igneous rock is analyzed quantitatively by calibration curve, and its lithology is identified accurately by the method of TAS diagram, whose accuracy rate is 90.7%. The study indicates that LIBS can effectively achieve the high precision identification of the lithology of igneous rock.

  13. 数控机床典型电气故障诊断与维修%Diagnosis and Maintenance of Electrical Breakdown of CNC Machine Tools

    Institute of Scientific and Technical Information of China (English)

    张晶辉

    2016-01-01

    With the development of numerical control technology ,the maintenance of CNC machine tools has become increasingly important .A CNC machine tool is mainly composed of electrical ,mechanical and hydraulic components .This paper discussed the diagnosis and maintenance of electrical breakdown of CNC machine tools .Through the understanding of the electrical principle of machine tools ,we can improve the efficience of repair and maintenance of the electrical system of machine tools .%随着数控技术的发展,数控机床的维修已越来越重要。主要对数控机床电气部分的故障诊断与维修进行了介绍。基于对机床电气原理的认识,可以更好地对机床电气系统进行维修与维护。

  14. Remote Raman - laser induced breakdown spectroscopy (LIBS) geochemical investigation under Venus atmospheric conditions

    Energy Technology Data Exchange (ETDEWEB)

    Clegg, Sanuel M [Los Alamos National Laboratory; Barefield, James E [Los Alamos National Laboratory; Humphries, Seth D [Los Alamos National Laboratory; Wiens, Roger C [Los Alamos National Laboratory; Vaniman, D. T. [Los Alamos National Laboratory; Sharma, S. K. [UNIV OF HAWAII; Misra, A. K. [UNIV OF HAWAII; Dyar, M. D. [MT. HOLYOKE COLLEGE; Smrekar, S. E. [JET PROPULSION LAB.

    2010-12-13

    The extreme Venus surface temperatures ({approx}740 K) and atmospheric pressures ({approx}93 atm) create a challenging environment for surface missions. Scientific investigations capable of Venus geochemical observations must be completed within hours of landing before the lander will be overcome by the harsh atmosphere. A combined remote Raman - LIBS (Laser Induced Breakdown Spectroscopy) instrument is capable of accomplishing the geochemical science goals without the risks associated with collecting samples and bringing them into the lander. Wiens et al. and Sharma et al. demonstrated that both analytical techniques can be integrated into a single instrument capable of planetary missions. The focus of this paper is to explore the capability to probe geologic samples with Raman - LIBS and demonstrate quantitative analysis under Venus surface conditions. Raman and LIBS are highly complementary analytical techniques capable of detecting both the mineralogical and geochemical composition of Venus surface materials. These techniques have the potential to profoundly increase our knowledge of the Venus surface composition, which is currently limited to geochemical data from Soviet Venera and VEGA landers that collectively suggest a surface composition that is primarily tholeiitic basaltic with some potentially more evolved compositions and, in some locations, K-rich trachyandesite. These landers were not equipped to probe the surface mineralogy as can be accomplished with Raman spectroscopy. Based on the observed compositional differences and recognizing the imprecise nature of the existing data, 15 samples were chosen to constitute a Venus-analog suite for this study, including five basalts, two each of andesites, dacites, and sulfates, and single samples of a foidite, trachyandesite, rhyolite, and basaltic trachyandesite under Venus conditions. LIBS data reduction involved generating a partial least squares (PLS) model with a subset of the rock powder standards to

  15. Producer-retailer integrated EMQ system with machine breakdown, rework failures, and a discontinuous inventory issuing policy.

    Science.gov (United States)

    Chiu, Singa Wang; Chen, Shin-Wei; Chiu, Yuan-Shyi Peter; Li, Ting-Wei

    2016-01-01

    This study develops two extended economic manufacturing quantity (EMQ)-based models with a discontinuous product issuing policy, random machine breakdown, and rework failures. Various real conditions in production processes, end-product delivery, and intra-supply chains such as a producer-retailer integrated scheme are examined. The first model incorporates a discontinuous multi-delivery policy into a prior work (Chiu et al. in Proc Inst Mech Eng B J Eng 223:183-194, 2009) in lieu of their continuous policy. Such an enhanced model can address situations in supply chain environments, where finished products are transported to outside retail stores (or customers). The second model further combines retailer's stock holding costs into the first model. This extended EMQ model is applicable in situations in present-day manufacturing firms where finished products are distributed to company's own retail stores (or regional sales offices) and stocked there for sale. Two aforementioned extended EMQ models are investigated, respectively. Mathematical modeling along with iterative algorithms are employed to derive the optimal production run times that minimize the expected total system costs, including the costs incurred in production units, transportation, and retail stores, for these integrated EMQ systems. Numerical examples are provided to demonstrate the practical application of the research results.

  16. Determination of Aluminum in Nickel-Based Superalloys by Using Laser-Induced Breakdown Spectroscopy%Determination of Aluminum in Nickel-Based Superalloys by Using Laser-Induced Breakdown Spectroscopy

    Institute of Scientific and Technical Information of China (English)

    朱德华; 王茜; 倪晓武; 陈建平; 陆建

    2011-01-01

    Laser-induced breakdown spectroscopy (LIBS) was developed to detect aluminum in nickel-based superalloys (K417, GH4033, DZ125L, З ∏742y) using a non-intensified, non-gated, low-cost detection system. The precision of LIBS depends strongly on the experimental conditions. The calibration curves of Al(I)394.4 nm and Al(I)396.2 nm under the optimum experimental parameters are presented. Finally the limit of detection (LOD) for aluminum is calculated from the experimental data, which is in the range of 0.09% to 0.1% by weight.

  17. Laser-induced breakdown spectroscopy: Extending its application to soil pH measurements

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Edilene Cristina, E-mail: edilene@iq.unesp.br [São Paulo State University – UNESP, Analytical Chemistry Department, Rua Prof. Francisco Degni 55, CEP 14800-060, Araraquara, SP (Brazil); Gomes Neto, José A. [São Paulo State University – UNESP, Analytical Chemistry Department, Rua Prof. Francisco Degni 55, CEP 14800-060, Araraquara, SP (Brazil); Milori, Débora M.B.P.; Ferreira, Ednaldo José [Embrapa Agricultural Instrumentation, Rua XV de Novembro 1452, CEP 13560-970, São Carlos, SP (Brazil); Anzano, Jesús Manuel [Laser Laboratory & Environment, Faculty of Sciences, University of Zaragoza, C/. Pedro Cerbuna 12, 50009, Zaragoza (Spain)

    2015-08-01

    Acid–base equilibria are involved in almost all the processes that occur in soil. The bioavailability of nutrients for plants, for instance, depends on the solubilization of mineral nutrients in the soil solution, which is a pH-dependent process. The determination of pH in soil solutions is usually carried out by potentiometry using a glass membrane electrode, after extracting some of the soil components with water or CaCl{sub 2} solution. The present work describes a simple method for determining the pH of soil, using laser-induced breakdown spectroscopy (LIBS). Sixty samples presenting different textural composition and pH (previously determined by potentiometry) were employed. The samples were divided into a calibration set with fifty samples and a validation set with ten samples. LIBS spectra were recorded for each pelleted sample using laser pulse energy of 115 mJ. The intensities of thirty-two emission lines for Al, Ca, H, and O were used to fit a partial least squares (PLS) model. The model was validated by prediction of the pH of the validation set samples, which showed good agreement with the reference values. The prediction mean absolute error was 0.3 pH units and the root mean square error of the prediction was 0.4. These results highlight the potential of LIBS for use in other applications beyond elemental composition determinations. For soil analysis, the proposed method offers the possibility of determining pH, in addition to nutrients and contaminants, using a single LIBS measurement. - Highlights: • Physical, chemical, and biological properties of soil are influenced by pH. • The pH of mineral soils is normally determined in slurries of water and soil sample by potentiometric measurements. • The association of LIBS elemental emissions with multivariate strategies of analysis has become LIBS a powerful technique. • LIBS was unprecedentedly applied for direct pH determination in different kinds of soil sample. • The clean and fast proposed

  18. Analysis of frozen salt solutions with laser-induced breakdown spectroscopy under Martian conditions

    Science.gov (United States)

    Schröder, S.; Pavlov, S. G.; Hübers, H.-W.; Rauschenbach, I.; Jessberger, E. K.

    2010-05-01

    Laser-induced breakdown spectroscopy (LIBS) is a powerful analytical technique for determining the elemental composition of materials. It can be applied in-situ to geological surfaces on planetary missions. Since pure liquid water is unstable at the current surface conditions on Mars, i.e. low surface pressure and temperatures ranging from 140 K to 300 K, salt solutions or brines are of particular interest. It has been suggested that salts could stabilize liquid water on Mars lowering the freezing point of the solution and suppressing evaporation rates. The appropriate salts have been found on Mars in different locations. In this study LIBS is employed for the investigation of frozen sulphate and chloride solutions under Martian conditions in a dedicated simulation chamber. For the laboratory experiments, various salt solutions were prepared with different concentrations. To produce ice with only little inclusions of air, the samples were degassed before freezing them in a copper container. The measurements were performed at 240 K by cooling with liquid nitrogen and controlled heating. A constant flow of a Martian atmosphere-like gas mixture at a pressure of approximately 6 hPa was maintained through the chamber during the measurements. A Q-switched Nd:YAG laser operating at 1064nm and at 10 Hz was used to ablate material and to generate a plasma on the frozen sample's surface. The emitted light of the plasma was collected into the entrance slit of an echelle spectrometer (LTB Aryelle Butterfly) by a toroid mirror. A time-gated ICCD camera (Andor) at the exit of the spectrometer recorded the plasma emission signal. The laser beam was focused at a new position for each measurement. The delay time and the integration time of the spectrometer have been optimized to obtain good signal-to-noise ratios up to 150 while at the same time not losing signals from fast recombining ions. First, the spectra of several frozen salt solutions were investigated qualitatively

  19. Laser-induced breakdown spectroscopy for analysis of frozen salt solutions under Martian conditions

    Science.gov (United States)

    Schröder, Susanne; Pavlov, Sergey; Hübers, Heinz-Wilhelm; Rauschenbach, Isabelle; Jessberger, Elmar K.

    Laser-induced breakdown spectroscopy (LIBS) is a powerful analytical technique for determin-ing the elemental composition of materials. It can be applied in-situ to geological surfaces on planetary missions. Since pure liquid water is unstable at the current surface conditions on Mars, i.e. low surface pressure and temperatures ranging from 140 K to 300 K, salt solutions or brines are of particular interest. It has been suggested that salts could stabilize liquid water on Mars lowering the freezing point of the solution and suppressing evaporation rates. The ap-propriate salts have been found on Mars in different locations. In this study LIBS is employed for the investigation of frozen sulphate and chloride solutions under Martian conditions in a dedicated simulation chamber. For the laboratory experiments, various salt solutions were prepared with different concen-trations. To produce ice with only little inclusions of air, the samples were degassed before freezing them in a copper container. The measurements were performed at 240 K by cooling with liquid nitrogen and controlled heating. A constant flow of a Martian atmosphere-like gas mixture at a pressure of approximately 6 hPa was maintained through the chamber during the measurements. A Q-switched Nd:YAG laser operating at 1064nm and at 10 Hz was used to ablate material and to generate a plasma on the frozen sample's surface. The emitted light of the plasma was collected into the entrance slit of an echelle spectrometer (LTB Aryelle But-terfly) by a toroid mirror. A time-gated ICCD camera (Andor) at the exit of the spectrometer recorded the plasma emission signal. The laser beam was focused at a new position for each measurement. The delay time and the integration time of the spectrometer have been optimized to obtain good signal-to-noise ratios up to 150 while at the same time not losing signals from fast recombining ions. First, the spectra of several frozen salt solutions were investigated qualitatively

  20. Determination of silicon in plant materials by laser-induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Paulino Florêncio de [Centro de Energia Nuclear na Agricultura, Universidade de São Paulo, Av. Centenário 303, 13416-000, Piracicaba, SP (Brazil); Centro de Tecnologia Canavieira, PO Box 162, 13400-970 Piracicaba, SP (Brazil); Santos, Dário [Departamento de Ciências Exatas e da Terra, Universidade Federal de São Paulo, Rua Prof. Artur Riedel, 275, 09972-270, Diadema, SP (Brazil); Gustinelli Arantes de Carvalho, Gabriel; Nunes, Lidiane Cristina [Centro de Energia Nuclear na Agricultura, Universidade de São Paulo, Av. Centenário 303, 13416-000, Piracicaba, SP (Brazil); Silva Gomes, Marcos da [Centro de Energia Nuclear na Agricultura, Universidade de São Paulo, Av. Centenário 303, 13416-000, Piracicaba, SP (Brazil); Departamento de Química, Universidade Federal de São Carlos, 13565-905 São Carlos, SP (Brazil); Guerra, Marcelo Braga Bueno [Centro de Energia Nuclear na Agricultura, Universidade de São Paulo, Av. Centenário 303, 13416-000, Piracicaba, SP (Brazil); Krug, Francisco José, E-mail: fjkrug@cena.usp.br [Centro de Energia Nuclear na Agricultura, Universidade de São Paulo, Av. Centenário 303, 13416-000, Piracicaba, SP (Brazil)

    2013-05-01

    In spite of the importance of Si for improving the productivity of many important crops, such as those from the Poaceae family (e.g. sugar cane, maize, wheat, rice), its quantitative determination in plants is seldom carried out and restricted to few laboratories in the world. There is a survey of methods in the literature, but most of them are either laborious or difficult to validate in view of the low availability of reference materials with a certified Si mass fraction. The aim of this study is to propose a method for the direct determination of Si in pellets of plant materials by laser-induced breakdown spectroscopy (LIBS). The experimental setup was designed by using a Q-switched Nd:YAG laser at 1064 nm (5 ns, 10 Hz) and the emission signals were collected by lenses into an optical fiber coupled to an Echelle spectrometer equipped with an intensified charge-coupled device. Experiments were carried out with leaves from 24 sugar cane varieties, with mass fractions varying from ca. 2 to 10 g kg{sup −1} Si. Pellets prepared from cryogenically ground leaves were used as test samples for both method development and validation of the calibration model. Best results were obtained when the test samples were interrogated with laser fluence of 50 J cm{sup −2} (750 μm spot size) and measurements carried out at Si I 212.412 nm emission line. The results obtained by LIBS were compared with those from inductively coupled plasma optical emission spectrometry after oven-induced alkaline digestion, and no significant differences were observed after applying the Student's t-test at 95% confidence level. The trueness of the proposed LIBS method was also confirmed from the analysis of CRM GBW 07603 (Bush branches and leaves). - Highlights: • This is the first application of LIBS for determination of Si in plant materials. • Data indicate that the method is appropriate for Si diagnosis in routine analysis. • Silicon can be simultaneously determined with macro- and

  1. Quantification of gold and silver in minerals by laser-induced breakdown spectroscopy

    Science.gov (United States)

    Díaz, Daniel; Hahn, David W.; Molina, Alejandro

    2017-10-01

    The performance of laser-induced breakdown spectroscopy (LIBS) to identify and quantify gold and silver in ore samples was evaluated. Ores from a gold-producing mine and samples artificially doped with Au and Ag solutions to previously defined concentrations (surrogates) were prepared as 50-mm pellets prior to LIBS analysis. Silver detection and intensity measurement was straightforward for concentrations from 0.4 to 43 μg/g and from 1.1 to 375 μg/g in ore and surrogate samples, respectively. Au emission lines were not found after ensemble average or accumulation of 100-single shot LIBS spectra of ore samples containing up to 9.5 μg/g Au. However, the Au signal was present in the spectra of surrogate samples, for which a detection limit of about 0.8 μg/g was determined. When the number of sampling shots in ore samples increased, various single shot spectra registered Au emission lines. The number of spectra containing Au emission lines increased with the number of single shots. Those results, as well as scanning electron microscopy analysis of ore samples, suggest that the discrete analyte distribution as well as the inherent discrete characteristics associated to LIBS made the presence of gold in the LIBS spark an unlikely occurrence. The particle sampling rates (the percentage of laser pulses expected to sample at least one particle) were estimated for gold concentrations of 1.1 and 10.0 μg/g as 0.04% and 0.32%, respectively. A Monte Carlo simulation indicated that > 100 gold-containing particles should be sampled to accurately represent the discrete character of gold in the ore. Sampling 100 such particles requires > 105 laser pulses over a single pellet. Despite the fact that this rather large number of shots makes difficult to conduct conditional analysis on pellets, for some samples that withstood 5000 shots, gold quantification in ores was successfully achieved at concentrations as low as 1 μg/g. Results are encouraging and illustrate the applicability

  2. Quantitative estimation of carbonation and chloride penetration in reinforced concrete by laser-induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Eto, Shuzo, E-mail: eto@criepi.denken.or.jp [Central Research Institute of Electric Power Industry, 2-6-1 Nagasaka, Yokosuka, Kanagawa 240-0196 (Japan); Matsuo, Toyofumi; Matsumura, Takuro; Fujii, Takashi [Central Research Institute of Electric Power Industry, 2-6-1 Nagasaka, Yokosuka, Kanagawa 240-0196 (Japan); Tanaka, Masayoshi Y. [Interdisciplinary Graduate School of Engineering Sciences, Kyushu University, 2-6-1 Nagasaka, Yokosuka, Kanagawa 240-0196 (Japan)

    2014-11-01

    The penetration profile of chlorine in a reinforced concrete (RC) specimen was determined by laser-induced breakdown spectroscopy (LIBS). The concrete core was prepared from RC beams with cracking damage induced by bending load and salt water spraying. LIBS was performed using a specimen that was obtained by splitting the concrete core, and the line scan of laser pulses gave the two-dimensional emission intensity profiles of 100 × 80 mm{sup 2} within one hour. The two-dimensional profile of the emission intensity suggests that the presence of the crack had less effect on the emission intensity when the measurement interval was larger than the crack width. The chlorine emission spectrum was measured without using the buffer gas, which is usually used for chlorine measurement, by collinear double-pulse LIBS. The apparent diffusion coefficient, which is one of the most important parameters for chloride penetration in concrete, was estimated using the depth profile of chlorine emission intensity and Fick's law. The carbonation depth was estimated on the basis of the relationship between carbon and calcium emission intensities. When the carbon emission intensity was statistically higher than the calcium emission intensity at the measurement point, we determined that the point was carbonated. The estimation results were consistent with the spraying test results using phenolphthalein solution. These results suggest that the quantitative estimation by LIBS of carbonation depth and chloride penetration can be performed simultaneously. - Highlights: • We estimated the carbonation depth and the apparent diffusion coefficient of chlorine sodium in the reinforced concrete with cracking damage by LIBS. • Two-dimensional profile measurement of the emission intensity in each element was performed to visualize the chloride penetration and the carbonation in the reinforced concrete. • Apparent diffusion coefficient of chlorine and sodium can be estimated using the Fick

  3. Pathogen identification with laser-induced breakdown spectroscopy: the effect of bacterial and biofluid specimen contamination.

    Science.gov (United States)

    Mohaidat, Qassem I; Sheikh, Khadija; Palchaudhuri, Sunil; Rehse, Steven J

    2012-03-01

    In this paper, the potential use of laser-induced breakdown spectroscopy (LIBS) for the rapid discrimination and identification of bacterial pathogens in realistic clinical specimens is investigated. Specifically, the common problem of sample contamination was studied by creating mixed samples to investigate the effect that the presence of a second contaminant bacterium in the specimen had on the LIBS-based identification of the primary pathogen. Two closely related bacterial specimens, Escherichia coli strain ATCC 25922 and Enterobacter cloacae strain ATCC 13047, were mixed together in mixing fractions of 10:1, 100:1, and 1000:1. LIBS spectra from the three mixtures were reliably classified as the correct E. coli strain with 98.5% accuracy when all the mixtures were withheld from the training model and classified against spectra from pure specimens. To simulate a rapid test for the presence of urinary tract infection pathogens, LIBS spectra were obtained from specimens of Staphylococcus epidermidis obtained from distilled water and sterile urine. LIBS spectra from the urine-harvested bacteria were classified as S. epidermidis with 100% accuracy when classified using a model containing only spectra from other Staphylococci species and with 88.5% accuracy when a model containing five genera of bacteria was utilized. Bacterial specimens comprising five different genera and 13 classifiable taxonomic groups of species and strains were compiled in a library that was tested using external validation techniques. The importance of utilizing external validation techniques where the library is tested with data withheld from all previous testing and training of the model was revealed by comparing the results against "leave-one-out" cross-validation results. Last, the effect of using sequential models for the classification of a single unknown spectrum was investigated by comparing the misclassification of two closely related bacteria, E. coli and E. cloacae, when the

  4. Isotopic determination of uranium in soil by laser induced breakdown spectroscopy

    Science.gov (United States)

    Chan, George C.-Y.; Choi, Inhee; Mao, Xianglei; Zorba, Vassilia; Lam, Oanh P.; Shuh, David K.; Russo, Richard E.

    2016-08-01

    Laser-induced breakdown spectroscopy (LIBS) operated under ambient pressure has been evaluated for isotopic analysis of uranium in real-world samples such as soil, with U concentrations in the single digit percentage levels. The study addresses the requirements for spectral decomposition of 235U and 238U atomic emission peaks that are only partially resolved. Although non-linear least-square fitting algorithms are typically able to locate the optimal combination of fitting parameters that best describes the experimental spectrum even when all fitting parameters are treated as free independent variables, the analytical results of such an unconstrained free-parameter approach are ambiguous. In this work, five spectral decomposition algorithms were examined, with different known physical properties (e.g., isotopic splitting, hyperfine structure) of the spectral lines sequentially incorporated into the candidate algorithms as constraints. It was found that incorporation of such spectral-line constraints into the decomposition algorithm is essential for the best isotopic analysis. The isotopic abundance of 235U was determined from a simple two-component Lorentzian fit on the U II 424.437 nm spectral profile. For six replicate measurements, each with only fifteen laser shots, on a soil sample with U concentration at 1.1% w/w, the determined 235U isotopic abundance was (64.6 ± 4.8)%, and agreed well with the certified value of 64.4%. Another studied U line - U I 682.691 nm possesses hyperfine structure that is comparatively broad and at a significant fraction as the isotopic shift. Thus, 235U isotopic analysis with this U I line was performed with spectral decomposition involving individual hyperfine components. For the soil sample with 1.1% w/w U, the determined 235U isotopic abundance was (60.9 ± 2.0)%, which exhibited a relative bias about 6% from the certified value. The bias was attributed to the spectral resolution of our measurement system - the measured line

  5. Determination of Cd, Cr and Pb in phosphate fertilizers by laser-induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Nunes, Lidiane Cristina; Gustinelli Arantes de Carvalho, Gabriel [NAPTISA Research Support Center “Technology and Innovation for a Sustainable Agriculture”, Center for Nuclear Energy in Agriculture, University of São Paulo, Av. Centenário 303, 13416-000, Piracicaba SP (Brazil); Santos, Dario [Federal University of São Paulo, R. Prof. Artur Riedel 275, 09972-270, Diadema SP (Brazil); Krug, Francisco José, E-mail: fjkrug@cena.usp.br [NAPTISA Research Support Center “Technology and Innovation for a Sustainable Agriculture”, Center for Nuclear Energy in Agriculture, University of São Paulo, Av. Centenário 303, 13416-000, Piracicaba SP (Brazil)

    2014-07-01

    A validated method for quantitative determination of Cd, Cr, and Pb in phosphate fertilizers by laser-induced breakdown spectroscopy (LIBS) is presented. Laboratory samples were comminuted and homogenized by cryogenic or planetary ball milling, pressed into pellets and analyzed by LIBS. The experimental setup was designed by using a Q-switched Nd:YAG at 1064 nm with 10 Hz repetition rate, and the intensity signals from Cd II 214.441 nm, Cr II 267.716 nm and Pb II 220.353 nm emission lines were measured by using a spectrometer furnished with an intensified charge-coupled device. LIBS parameters (laser fluence, lens-to-sample distance, delay time, integration time gate, number of sites and number of laser pulses per site) were chosen after univariate experiments with a pellet of NIST SRM 695 (Trace Elements in Multi-Nutrient Fertilizer). Calibration and validation were carried out with 30 fertilizer samples from single superphosphate, triple superphosphate, monoammonium phosphate, and NPK mixtures. Good results were obtained by using 30 pulses of 50 J cm{sup −2} (750 μm spot size), 2.0 μs delay time and 5.0 μs integration time gate. No significant differences between Cd, Cr, and Pb mass fractions determined by the proposed LIBS method and by ICP OES after microwave-assisted acid digestion (AOAC 2006.03 Official Method) were found at 95% confidence level. The limits of detection of 1 mg kg{sup −1} Cd, 2 mg kg{sup −1} Cr and 15 mg kg{sup −1} Pb and the precision (coefficients of variation of results ranging from 2% to 15%) indicate that the proposed LIBS method can be recommended for the determination of these analytes in phosphate fertilizers. - Highlights: • First LIBS application for quantitative Cd, Cr and Pb determination in fertilizers. • LIBS method was validated for analysis of phosphate fertilizers pressed pellets. • LIBS sample throughput is remarkably better than already existing methods.

  6. Comparison of baseline removal methods for laser-induced breakdown spectroscopy of geological samples

    Science.gov (United States)

    Dyar, M. Darby; Giguere, Stephen; Carey, CJ; Boucher, Thomas

    2016-12-01

    This project examines the causes, effects, and optimization of continuum removal in laser-induced breakdown spectroscopy (LIBS) to produce the best possible prediction accuracy of elemental composition in geological samples. We compare prediction accuracy resulting from several different techniques for baseline removal, including asymmetric least squares (ALS), adaptive iteratively reweighted penalized least squares (Air-PLS), fully automatic baseline correction (FABC), continuous wavelet transformation, median filtering, polynomial fitting, the iterative thresholding Dietrich method, convex hull/rubber band techniques, and a newly-developed technique for Custom baseline removal (BLR). We assess the predictive performance of these methods using partial least-squares analysis for 13 elements of geological interest, expressed as the weight percentages of SiO2, Al2O3, TiO2, FeO, MgO, CaO, Na2O, K2O, and the parts per million concentrations of Ni, Cr, Zn, Mn, and Co. We find that previously published methods for baseline subtraction generally produce equivalent prediction accuracies for major elements. When those pre-existing methods are used, automated optimization of their adjustable parameters is always necessary to wring the best predictive accuracy out of a data set; ideally, it should be done for each individual variable. The new technique of Custom BLR produces significant improvements in prediction accuracy over existing methods across varying geological data sets, instruments, and varying analytical conditions. These results also demonstrate the dual objectives of the continuum removal problem: removing a smooth underlying signal to fit individual peaks (univariate analysis) versus using feature selection to select only those channels that contribute to best prediction accuracy for multivariate analyses. Overall, the current practice of using generalized, one-method-fits-all-spectra baseline removal results in poorer predictive performance for all methods. The

  7. Elemental analysis of powders with surface-assisted thin film laser-induced breakdown spectroscopy

    Science.gov (United States)

    Tian, Ye; Cheung, Hoi Ching; Zheng, Ronger; Ma, Qianli; Chen, Yanping; Delepine-Gilon, Nicole; Yu, Jin

    2016-10-01

    We have developed in this work a method of elemental analysis of powdered materials with laser-induced breakdown spectroscopy (LIBS). This method requires simple sample preparation. Powders are first mixed into a 75 cSt base oil to obtain a paste which is then smeared onto the polished surface of a solid state substrate, aluminum plate for instance, in the form of a uniform thin film. The prepared sample is ablated by a high energy infrared (IR at 1064 nm) nanosecond laser pulse. The laser beam transmits through the coating layer of the material to be analyzed and induces a strong plasma from the substrate. The initial plasma interacts in turn with the coating layer, leading to the vaporization and excitation of the incorporated powder particles. The subsequent emission from the plasma includes emission lines of the elements contained in the powder, which is preferentially captured by a suitable detection system. The analysis of the recorded spectrum allows the concentration determination of the targeted elements in the powder. We first applied the method on a cellulose powder of 20 μm typical particle size. The powder was spiked with titanium dioxide (TiO2) nanoparticles for Ti concentrations ranging from 25 ppm to 5000 ppm by weight. Calibration graphs were thus built to deduce figures-of-merit parameters such as the coefficient of determination (R2) and the limits of detection and quantification (LoD and LoQ). We optimized especially the choice of reference line for spectrum normalization, which resulted in better analytical performances. In the second step, two sets of powders, the aforementioned cellulose powder and an alumina powder with average particle size of ≤ 10 μm, were spiked with TiO2 nanoparticles. We then assessed the matrix effect between these two different powders for the determination of Ti by comparing their calibration curves. Our results show universal calibration curve in Ti determination in the two tested matrices. The results are

  8. Laser-induced breakdown spectroscopy application to control of the process of precious metal recovery and recycling

    Energy Technology Data Exchange (ETDEWEB)

    Legnaioli, S.; Lorenzetti, G.; Pardini, L. [Institute of Chemistry of Organometallic Compounds, Research Area of CNR, Via G. Moruzzi, 1-56124 Pisa (Italy); Palleschi, V., E-mail: vincenzo.palleschi@cnr.it [Institute of Chemistry of Organometallic Compounds, Research Area of CNR, Via G. Moruzzi, 1-56124 Pisa (Italy); Pace, D.M. Diaz [Instituto de Fisica ' Arroyo Seco' , Facultad de Ciencias Exactas, Paraje Arroyo Seco-(B7000GHG) Tandil (Argentina); Garcia, F. Anabitarte [Photonic Engineering Group, Universidad de Cantabria, Edificio I-D-i Telecomunicacion, Dpto. TEISA-39005 Santander (Spain); Grassi, R.; Sorrentino, F.; Carelli, G.; Francesconi, M.; Francesconi, F. [Marwan Technology, Largo Pontecorvo, 3-56127 Pisa Italy (Italy); Borgogni, R. [CABRO S.p.A.,Via Setteponti, 141-52100 Arezzo (Italy)

    2012-05-15

    In this paper, we discuss the application of laser-induced breakdown spectroscopy to precious metal alloys used for the control of the process of recovery and recycling of scraps and waste of industrial processes. In particular, the possibility to obtain sensitivity and trueness comparable to the current systems used in industrial environment in the quantitative determination of the elements of interest was explored. The present study demonstrates that laser-induced breakdown spectroscopy can be considered as a viable alternative to inductively coupled plasma optical emission spectrometry and X-ray fluorescence spectroscopy for the determination of recovered precious metals. The limits of detection obtained are of the order of 0.2 mg/g for all the elements considered. The maximum deviation with respect to the nominal concentrations is around 1 mg/g at concentrations around 20 mg/g (gold) corresponding to a relative error slightly higher than {+-} 5%. - Highlights: Black-Right-Pointing-Pointer We discuss application of LIBS for the analysis of recovered precious metals. Black-Right-Pointing-Pointer The advantages and drawbacks of LIBS vs. XRF are evidenced. Black-Right-Pointing-Pointer A strategy is devised for obtaining by LIBS limits of detection comparable to XRF. Black-Right-Pointing-Pointer The same strategy would provide trueness in analytical results comparable to XRF. Black-Right-Pointing-Pointer The time needed and the complexity of LIBS analysis would not exceed the XRF ones.

  9. Development of Calibration-Free Laser-Induced-Breakdown-Spectroscopy based techniques for deposited layers diagnostics on ITER-like tiles

    Energy Technology Data Exchange (ETDEWEB)

    Fantoni, Roberta [ENEA, UTAPRAD, V. E. Fermi 45, 00044 Frascati (Italy); Almaviva, Salvatore, E-mail: salvatore.almaviva@enea.it [ENEA, UTAPRAD, V. E. Fermi 45, 00044 Frascati (Italy); Caneve, Luisa; Colao, Francesco [ENEA, UTAPRAD, V. E. Fermi 45, 00044 Frascati (Italy); Popov, Andrey M. [Chemistry Department, M.V. Lomonosov Moscow State University, Moscow (Russian Federation); Maddaluno, Giorgio [Assoc. ENEA-EURATOM sulla Fusione, V. E. Fermi 45, 00044 Frascati (Italy)

    2013-09-01

    High temperature plasma in hydrogen isotopes is peculiar of thermonuclear fusion devices. The study of plasma–wall interaction is of paramount importance for avoiding both damage of plasma facing components (PFCs) and pollution of the plasma. To assure continuous and fault-free operation a strict control must be exerted on the amount of impurities deposited on, and of the fuel retained in the PFCs. This requirement makes Laser-Induced-Breakdown-Spectroscopy (LIBS) an ideal candidate for on-line quantitative monitoring of the walls of the current as well as of the next generation fusion devices like the International Thermonuclear Experimental Reactor (ITER). An experimental setup has been designed and realized in order to optimize the characteristics of a LIBS system working at low pressure and remotely, and it has been utilized in combination with calibration free procedures for quantitative analysis. In this work, a partial calibration free method has been developed for single shot analysis of hydrogen isotopes retention at the PFCs-like surfaces, based on the acquisition of high resolution spectra in a narrow wavelength range. Results of calibration free and partial calibration free have been obtained on suitably deuterated samples; preliminary spectroscopic considerations on tritium detection are also presented. - Highlights: • LIBS system “in situ” and remote for new generation fusion machines • Atomic composition of plasma facing component samples in fusion machines • Calibration free method for a qualitative/quantitative analysis is discussed. • Description of a new simplified calibration free method (partial calibration free) • LIBS for screening erosion/redeposition during operation of fusion machines.

  10. Development of a Stand-off Laser Induced Breakdown Spectroscopy (ST-LIBS) system for the analysis of complex matrices

    Science.gov (United States)

    Tamboli, M. M.; Unnikrishnan, V. K.; Nayak, R.; Devangad, P.; Muhammed Shameem, K. M.; Kartha, V. B.; Santhosh, C.

    2016-08-01

    In the present work, we discuss the evaluation and optimization of a stand-off laser induced breakdown spectroscopy (ST-LIBS) system, developed indigenously for remote analysis of heavy elements in soil. A compact Q-switched Nd:YAG laser operating at fundamental wavelength 1064 nm was used for plasma generation at distances up to 6 meters. Techniques for optimal experimental results were evaluated for detection of Cd, Cr, Pb, Mo and Ni in soil. The system was evaluated with two NIST certified soil samples. The effect of working distance on the LIBS signal is also discussed briefly. Results confirm the capabilities of the system for remote monitoring.

  11. Note: A portable laser induced breakdown spectroscopy instrument for rapid sampling and analysis of silicon-containing aerosols

    Science.gov (United States)

    McLaughlin, R. P.; Mason, G. S.; Miller, A. L.; Stipe, C. B.; Kearns, J. D.; Prier, M. W.; Rarick, J. D.

    2016-05-01

    A portable instrument has been developed for measuring silicon-containing aerosols in near real-time using laser-induced breakdown spectroscopy (LIBS). The instrument uses a vacuum system to collect and deposit airborne particulate matter onto a translatable reel of filter tape. LIBS is used to analyze the deposited material, determining the amount of silicon-containing compounds present. In laboratory testing with pure silica (SiO2), the correlation between LIBS intensity for a characteristic silicon emission and the concentration of silica in a model aerosol was determined for a range of concentrations, demonstrating the instrument's plausibility for identifying hazardous levels of silicon-containing compounds.

  12. Investigation of the osteitis deformans phases in snake vertebrae by double-pulse laser-induced breakdown spectroscopy.

    Science.gov (United States)

    Galiová, M; Kaiser, J; Novotný, K; Ivanov, M; Nývltová Fisáková, M; Mancini, L; Tromba, G; Vaculovic, T; Liska, M; Kanický, V

    2010-09-01

    Double-pulse laser-induced breakdown spectroscopy (DP-LIBS) was optimized for microspatial analyses of fossil and recent snake vertebrae. As complimentary techniques, solution analysis by inductively coupled plasma mass spectrometry and synchrotron radiation X-ray microtomography was utilized in order to determine the overall concentration of the selected elements in the samples and to visualize nondestructively the fossil sample microstructure, respectively. Elemental mapping of pathological bony tissue by DP-LIBS has been proven as a powerful tool for considering the osteitis deformans phases in fossil vertebrae.

  13. Fast analysis of complex metallic alloys by double-pulse time-integrated Laser-Induced Breakdown Spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Sorrentino, F., E-mail: marwan@df.unipi.i [Marwan Technology s.r.l., Spin-off University of Pisa Largo Pontecorvo 3, 56127 Pisa (Italy); Carelli, G.; Francesconi, F.; Francesconi, M.; Marsili, P. [Marwan Technology s.r.l., Spin-off University of Pisa Largo Pontecorvo 3, 56127 Pisa (Italy); Cristoforetti, G.; Legnaioli, S.; Palleschi, V.; Tognoni, E. [Applied Laser Spectroscopy Laboratory, IPCF/CNR - Via G.Moruzzi 1, 56124 Pisa (Italy)

    2009-10-15

    Results are reported on the application of double-pulse Laser-Induced Breakdown Spectroscopy (LIBS) for fast analysis of complex metallic alloys. The approach followed for the determination of the composition of the alloys is based on the time-integrated acquisition of LIBS spectra emitted by plasmas induced by collinear double-pulse laser excitation. The spectra are analysed using the Partial Least Squares method, which allows the determination of sample composition even in the presence of strong spectral interferences. The results shown indicate the possibility of measuring the composition of complex metallic alloys in very short times and using relatively cheap LIBS instrumentation.

  14. Multivariate Methods for Prediction of Geologic Sample Composition with Laser-Induced Breakdown Spectroscopy

    Science.gov (United States)

    Morris, Richard; Anderson, R.; Clegg, S. M.; Bell, J. F., III

    2010-01-01

    Laser-induced breakdown spectroscopy (LIBS) uses pulses of laser light to ablate a material from the surface of a sample and produce an expanding plasma. The optical emission from the plasma produces a spectrum which can be used to classify target materials and estimate their composition. The ChemCam instrument on the Mars Science Laboratory (MSL) mission will use LIBS to rapidly analyze targets remotely, allowing more resource- and time-intensive in-situ analyses to be reserved for targets of particular interest. ChemCam will also be used to analyze samples that are not reachable by the rover's in-situ instruments. Due to these tactical and scientific roles, it is important that ChemCam-derived sample compositions are as accurate as possible. We have compared the results of partial least squares (PLS), multilayer perceptron (MLP) artificial neural networks (ANNs), and cascade correlation (CC) ANNs to determine which technique yields better estimates of quantitative element abundances in rock and mineral samples. The number of hidden nodes in the MLP ANNs was optimized using a genetic algorithm. The influence of two data preprocessing techniques were also investigated: genetic algorithm feature selection and averaging the spectra for each training sample prior to training the PLS and ANN algorithms. We used a ChemCam-like laboratory stand-off LIBS system to collect spectra of 30 pressed powder geostandards and a diverse suite of 196 geologic slab samples of known bulk composition. We tested the performance of PLS and ANNs on a subset of these samples, choosing to focus on silicate rocks and minerals with a loss on ignition of less than 2 percent. This resulted in a set of 22 pressed powder geostandards and 80 geologic samples. Four of the geostandards were used as a validation set and 18 were used as the training set for the algorithms. We found that PLS typically resulted in the lowest average absolute error in its predictions, but that the optimized MLP ANN and

  15. Remote Laser Induced Breakdown Spectroscopy (LIBS) Geochemical Investigation under Venus Atmospheric Conditions

    Science.gov (United States)

    Clegg, S. M.; Barefield, J. E.; Humphries, S.; Wiens, R. C.; Vaniman, D.; Dyar, M. D.; Tucker, J. M.; Sharma, S. K.; Misra, A. K.

    2009-12-01

    The extreme Venus surface temperature (740 K) and atmospheric pressure (93 atm) creates a challenging environment for future lander missions. Scientific investigations capable of Venus geochemical observations must be completed within several hours of landing before the lander is overcome by the harsh atmosphere. A combined remote Raman - LIBS (Laser Induced Breakdown Spectroscopy) instrument is capable of accomplishing geochemical science goals without the risks associated with collecting samples and bringing them into the lander. Wiens et al. [1] and Sharma et al. [2] have demonstrated that both analytical techniques can be integrated into a single instrument capable of planetary missions. The focus of this paper is to explore the capability to probe geologic samples with LIBS and demonstrate the quantitative analysis under Venus surface conditions. The LIBS experiment involves focusing a Nd:YAG laser operating at 1064 nm onto the surface of the sample. The laser ablates material from the surface, generating a plasma containing electronically excited atoms, ions and small molecules. Some of this emission is collected with an 89 mm diameter telescope. The light is directed into a Princeton Instruments f/4 0.25 m dispersive spectrometer and recorded with an ICCD detector. The powdered and pelletized samples are placed in a pressure vessel containing supercritical CO2 at 93 atm and at least 423 K and the vessel is placed at least 1.6 m from the telescope and laser. A range of Venus-analog basaltic rock types [3] was chosen for this study to reproduce compositions identified by Soviet Venera and VEGA landers, including several standards: four basalts (BCR-2, BIR-1, GUWBM, JB-2), granite (GBW 07015), andesite (JA-1), carbonate (SARM-40), and Kauai volcanic (KV04-17, KV04-25). We also added a good Venus analog, TAP 04, which is an alkali-rich rock from an olivine minette in the Ayutla volcanic field (Righter and Rosas-Elguera [4]). Our goal was to study samples with a

  16. Fusion related research with laser-induced-breakdown-spectroscopy on metallic samples at the ENEA-Frascati laboratory.

    Science.gov (United States)

    Almaviva, S.; Caneve, L.; Colao, F.; Maddaluno, G.

    2016-04-01

    The study of plasma-wall interactions is of paramount importance for continuous and fault free operations in thermonuclear fusion research to monitor the damages of plasma facing components (PFCs), plasma pollution from impurities and wall retention of hydrogen isotopes, like tritium. These needs make laser-induced-breakdown-spectroscopy (LIBS) a suitable candidate for a real time monitoring of PFCs in the current and next generation fusion devices, like ITER. It is also worthwhile for the quantitative analysis of surfaces, with micro-destructivity of the sample and depth profiling capabilities with sub-micrometric sensitivity. In this paper LIBS spectroscopy is exploited as a valid diagnostic tool for PFCs at the ENEA Research Center in Frascati (Italy) and at the Institute of Plasma Physics and Laser Microfusion (IPPLM) of Warsaw (Poland). The activities have been focused on LIBS characterization of samples simulating PFCs surfaces eroded/redeposited or contaminated from nuclear fuel after or during the normal operation of the reactor.

  17. Laser induced breakdown spectroscopy for elemental analysis in environmental, cultural heritage and space applications: a review of methods and results.

    Science.gov (United States)

    Gaudiuso, Rosalba; Dell'Aglio, Marcella; De Pascale, Olga; Senesi, Giorgio S; De Giacomo, Alessandro

    2010-01-01

    Analytical applications of Laser Induced Breakdown Spectroscopy (LIBS), namely optical emission spectroscopy of laser-induced plasmas, have been constantly growing thanks to its intrinsic conceptual simplicity and versatility. Qualitative and quantitative analysis can be performed by LIBS both by drawing calibration lines and by using calibration-free methods and some of its features, so as fast multi-elemental response, micro-destructiveness, instrumentation portability, have rendered it particularly suitable for analytical applications in the field of environmental science, space exploration and cultural heritage. This review reports and discusses LIBS achievements in these areas and results obtained for soils and aqueous samples, meteorites and terrestrial samples simulating extraterrestrial planets, and cultural heritage samples, including buildings and objects of various kinds.

  18. Laser Induced Breakdown Spectroscopy for Elemental Analysis in Environmental, Cultural Heritage and Space Applications: A Review of Methods and Results

    Directory of Open Access Journals (Sweden)

    Alessandro De Giacomo

    2010-08-01

    Full Text Available Analytical applications of Laser Induced Breakdown Spectroscopy (LIBS, namely optical emission spectroscopy of laser-induced plasmas, have been constantly growing thanks to its intrinsic conceptual simplicity and versatility. Qualitative and quantitative analysis can be performed by LIBS both by drawing calibration lines and by using calibration-free methods and some of its features, so as fast multi-elemental response, micro-destructiveness, instrumentation portability, have rendered it particularly suitable for analytical applications in the field of environmental science, space exploration and cultural heritage. This review reports and discusses LIBS achievements in these areas and results obtained for soils and aqueous samples, meteorites and terrestrial samples simulating extraterrestrial planets, and cultural heritage samples, including buildings and objects of various kinds.

  19. Unreported Emission Lines of Rb, Ce, La, Sr, Y, Zr, Pb and Se Detected Using Laser-Induced Breakdown Spectroscopy

    Science.gov (United States)

    Lepore, K. H.; Mackie, J.; Dyar, M. D.; Fassett, C. I.

    2017-01-01

    Information on emission lines for major and minor elements is readily available from the National Institute of Standards and Technology (NIST) as part of the Atomic Spectra Database. However, tabulated emission lines are scarce for some minor elements and the wavelength ranges presented on the NIST database are limited to those included in existing studies. Previous work concerning minor element calibration curves measured using laser-induced break-down spectroscopy found evidence of Zn emission lines that were not documented on the NIST database. In this study, rock powders were doped with Rb, Ce, La, Sr, Y, Zr, Pb and Se in concentrations ranging from 10 percent to 10 parts per million. The difference between normalized spectra collected on samples containing 10 percent dopant and those containing only 10 parts per million were used to identify all emission lines that can be detected using LIBS (Laser-Induced Breakdown Spectroscopy) in a ChemCam-like configuration at the Mount Holyoke College LIBS facility. These emission spectra provide evidence of many previously undocumented emission lines for the elements measured here.

  20. Chemical characterization of single micro- and nano-particles by optical catapulting-optical trapping-laser-induced breakdown spectroscopy

    Science.gov (United States)

    Fortes, Francisco J.; Fernández-Bravo, Angel; Javier Laserna, J.

    2014-10-01

    Spectral identification of individual micro- and nano-sized particles by the sequential intervention of optical catapulting, optical trapping and laser-induced breakdown spectroscopy is presented. The three techniques are used for different purposes. Optical catapulting (OC) serves to put the particulate material under inspection in aerosol form. Optical trapping (OT) permits the isolation and manipulation of individual particles from the aerosol, which are subsequently analyzed by laser-induced breakdown spectroscopy (LIBS). Once catapulted, the dynamics of particle trapping depends both on the laser beam characteristics (power and intensity gradient) and on the particle properties (size, mass and shape). Particles are stably trapped in air at atmospheric pressure and can be conveniently manipulated for a precise positioning for LIBS analysis. The spectra acquired from the individually trapped particles permit a straightforward identification of the material inspected. Variability of LIBS signal for the inspection of Ni microspheres was 30% relative standard deviation. OC-OT-LIBS permits the separation of particles in a heterogeneous mixture and the subsequent analysis of the isolated particle of interest. In order to evaluate the sensitivity of the approach, the number of absolute photons emitted by a single trapped particle was calculated. The limit of detection (LOD) for Al2O3 particles was calculated to be 200 attograms aluminium.

  1. Atomization efficiency and photon yield in laser-induced breakdown spectroscopy analysis of single nanoparticles in an optical trap

    Science.gov (United States)

    Purohit, Pablo; Fortes, Francisco J.; Laserna, J. Javier

    2017-04-01

    Laser-induced breakdown spectroscopy (LIBS) was employed for investigating the influence of particle size on the dissociation efficiency and the absolute production of photons per mass unit of airborne solid graphite spheres under single-particle regime. Particles of average diameter of 400 nm were probed and compared with 2 μm particles. Samples were first catapulted into aerosol form and then secluded in an optical trap set by a 532 nm laser. Trap stability was quantified before subjecting particles to LIBS analysis. Fine alignment of the different lines comprising the optical catapulting-optical trapping-laser-induced breakdown spectroscopy instrument and tuning of excitation parameters conditioning the LIBS signal such as fluence and acquisition delay are described in detail with the ultimate goal of acquiring clear spectroscopic data on masses as low as 75 fg. The atomization efficiency and the photon yield increase as the particle size becomes smaller. Time-resolved plasma imaging studies were conducted to elucidate the mechanisms leading to particle disintegration and excitation.

  2. Recognition of spectral identifier from green coffee beans of arabica and robusta varieties using laser-induced breakdown spectroscopy

    Science.gov (United States)

    Anggraeni, Karina; Nasution, Aulia; Suyanto, Hery

    2016-11-01

    Coffee is one of the world's commodity that is cultivated in more than 50 countries. Production of coffee in Indonesia is positioned of fourth rank in the world, after Brazil, Vietnam, and Colombia. There are two varieties of coffee grown in Indonesia, i.e. the arabica and robusta. The chemical compositions between arabica and robusta are different each other. A trained coffee tester can distinguish these differences from its taste, but it is very subjective. Laser-Induced Breakdown Spectroscopy (LIBS) is a spectroscopic technique based on the analysis of micro-plasma induced on the surface sample after being shot with a laser pulse. In this study, elemental spectra acquired using Laser-Induced Breakdown Spectroscopy (LIBS) technique were analysed to differentate between green coffee beans of arabica and robusta, which are collected from plantations in Malang, Bondowoso, Prigen, and Pasuruan. Results show that optimum conditions for acquiring spectra from green coffee beans using LIBS are at 120 mJ of laser energy and 1,0 μs of delay time. Green coffee beans of arabica and robusta contain some elements such as Ca, W, Sr, Mg, Be, Na, H, N, K, Rb, and O. Discriminant analysis method was then applied to distinguish the green beans of arabica and robusta coffee. Element identifiers of green coffee beans are Ca, W, Mg, Be, Na, and Sr. The abundant element in green coffee beans is Calcium (Ca), and depth-profile testing shows that Ca is homogeneous inside the beans.

  3. The Role of Plasma Shielding in Double-Pulse Femtosecond Laser-Induced Breakdown Spectroscopy

    CERN Document Server

    Penczak, John S; Bar, Ilana; Gordon, Robert J

    2013-01-01

    It is well known that optical emission produced by femtosecond laser-induced breakdown on a surface may be enhanced by using a pair of laser pulses separated by a suitable delay. Here we elucidate the mechanism for this effect both experimentally and theoretically. Using a bilayer sample consisting of a thin film of Ag deposited on an Al substrate as the ablation target and measuring the breakdown spectrum as a function of fluence and pulse delay, it is shown experimentally that the enhanced signal is not caused by additional ablation initiated by the second pulse. Rather, particle-in-cell calculations show that the plasma produced by the first pulse shields the surface from the second pulse for delays up to 100 ps. These results indicate that the enhancement is the result of excitement of particles entrained in the plasma produced by the first pulse.

  4. Evaluation of the laser-induced breakdown spectroscopy technique for determination of the chemical composition of copper concentrates

    Energy Technology Data Exchange (ETDEWEB)

    Łazarek, Łukasz, E-mail: lukasz.lazarek@pwr.wroc.pl [Laser and Fiber Electronics Group, Faculty of Electronics, Wroclaw University of Technology, Wyb. Wyspianskiego 27, 50-370 Wroclaw (Poland); Antończak, Arkadiusz J.; Wójcik, Michał R. [Laser and Fiber Electronics Group, Faculty of Electronics, Wroclaw University of Technology, Wyb. Wyspianskiego 27, 50-370 Wroclaw (Poland); Drzymała, Jan [Faculty of Geoengineering, Mining and Geology, Wroclaw University of Technology, Wyb. Wyspianskiego 27, 50-370 Wroclaw (Poland); Abramski, Krzysztof M. [Laser and Fiber Electronics Group, Faculty of Electronics, Wroclaw University of Technology, Wyb. Wyspianskiego 27, 50-370 Wroclaw (Poland)

    2014-07-01

    Laser-induced breakdown spectroscopy (LIBS), like many other spectroscopic techniques, is a comparative method. Typically, in qualitative analysis, synthetic certified standard with a well-known elemental composition is used to calibrate the system. Nevertheless, in all laser-induced techniques, such calibration can affect the accuracy through differences in the overall composition of the chosen standard. There are also some intermediate factors, which can cause imprecision in measurements, such as optical absorption, surface structure and thermal conductivity. In this work the calibration performed for the LIBS technique utilizes pellets made directly from the tested materials (old well-characterized samples). This choice produces a considerable improvement in the accuracy of the method. This technique was adopted for the determination of trace elements in industrial copper concentrates, standardized by conventional atomic absorption spectroscopy with a flame atomizer. A series of copper flotation concentrate samples was analyzed for three elements: silver, cobalt and vanadium. We also proposed a method of post-processing the measurement data to minimize matrix effects and permit reliable analysis. It has been shown that the described technique can be used in qualitative and quantitative analyses of complex inorganic materials, such as copper flotation concentrates. It was noted that the final validation of such methodology is limited mainly by the accuracy of the characterization of the standards. - Highlights: • A laser-induced breakdown spectroscopy technique is introduced for composition monitoring in industrial copper concentrates. • Calibration samples consisted of pellets produced from the tested materials. • The proposed method of post-processing significantly minimizes matrix effects. • The possible uses of this technique are limited mainly by accurate characterization of the standard samples.

  5. Elemental content of enamel and dentin after bleaching of teeth (a comparative study between laser-induced breakdown spectroscopy and x-ray photoelectron spectroscopy)

    Energy Technology Data Exchange (ETDEWEB)

    Imam, H. [National Institute of Laser Enhanced Sciences, NILES, Cairo University, Giza (Egypt); Ahmed, Doaa [Department of Restorative Sciences, Faculty of Dentistry, Alexandria University, Alexandria (Egypt); Eldakrouri, Ashraf [National Institute of Laser Enhanced Sciences, NILES, Cairo University, Giza (Egypt); Department of Optometry and Vision Science, College of Applied Medical Science, King Saud University, Riyadh (Saudi Arabia)

    2013-06-21

    The elemental content of the superficial and inner enamel as well as that of dentin was analyzed using laser-induced breakdown spectroscopy (LIBS) and x-ray photoelectron spectroscopy (XPS) of bleached and unbleached tooth specimens. It is thus clear from the spectral analysis using both the LIBS and XPS technique that elemental changes (though insignificant within the scopes of this study) of variable intensities do occur on the surface of the enamel and extend deeper to reach dentin. The results of the LIBS revealed a slight reduction in the calcium levels in the bleached compared to the control specimens in all the different bleaching groups and in both enamel and dentin. The good correlation found between the LIBS and XPS results demonstrates the possibility of LIBS technique for detection of minor loss in calcium and phosphorus in enamel and dentin.

  6. [Influence of laser power and incident angle as well as testing distance on laser inducted breakdown spectroscopy (LIBS) technology for spectroscopy diagnosis and multi-element analysis].

    Science.gov (United States)

    Zhai, Yang; Zhu, Ri-Hong; Shen, Hua; Gu, Jin-Liang

    2011-10-01

    Laser inducted breakdown spectroscopy (LIBS) technology has been used widely for the multi-element analysis of different samples and also an effective way to realize the spectroscopy diagnosis applied to calculating the electron temperature and vibration-rotation temperature etc of some certain elements. It is a highly effective measurement for its non-contact and nondestructive on-line analysis with the help of a high-speed response CCD camera. In the present paper, the authors tested an alley though LIBS technology to determine its elements in terms of species and quantities and also discussed some influences of the incident angle and the power changes of the laser beam as well as the measurement distance changes on the experimental results and and gave appropriate theoretical explanation.

  7. VUV absorption spectroscopy measurements of the role of fast neutral atoms in high-power gap breakdown

    Energy Technology Data Exchange (ETDEWEB)

    FILUK,A.B.; BAILEY,JAMES E.; CUNEO,MICHAEL E.; LAKE,PATRICK WAYNE; NASH,THOMAS J.; NOACK,DONALD D.; MARON,Y.

    2000-03-20

    The maximum power achieved in a wide variety of high-power devices, including electron and ion diodes, z pinches, and microwave generators, is presently limited by anode-cathode gap breakdown. A frequently-discussed hypothesis for this effect is ionization of fast neutral atoms injected throughout the anode-cathode gap during the power pulse. The authors describe a newly-developed diagnostic tool that provides the first direct test of this hypothesis. Time-resolved vacuum-ultraviolet absorption spectroscopy is used to directly probe fast neutral atoms with 1 mm spatial resolution in the 10 mm anode-cathode gap of the SABRE 5 MV, 1 TW applied-B ion diode. Absorption spectra collected during Ar RF glow discharges and with CO{sub 2} gas fills confirm the reliability of the diagnostic technique. Throughout the 50--100 ns ion diode pulses no measurable neutral absorption is seen, setting upper limits of 0.12--1.5 x 10{sup 14} cm{sup {minus}3} for ground state fast neutral atom densities of H, C, N, O, F. The absence of molecular absorption bands also sets upper limits of 0.16--1.2 x 10{sup 15} cm{sup {minus}3} for common simple molecules. These limits are low enough to rule out ionization throughout the gap as a breakdown mechanism. This technique can now be applied to quantify the role of neutral atoms in other high-power devices.

  8. The use of laser-induced breakdown spectroscopy for the determination of fluorine concentration in glass ionomer cement

    Science.gov (United States)

    Kratochvíl, T.; Pouzar, M.; Novotný, K.; Havránek, V.; Černohorský, T.; Zvolská, M.

    2013-10-01

    The influence of He atmosphere and gate width in laser-induced breakdown spectroscopy (LIBS) determination of fluorine concentration was investigated in detail. The measurements were realized on two double pulse LIBS devices featuring different parameters. Calibration curves, describing the relationship between the fluorine concentration and the corresponding intensity of the LIBS signal, were constructed for both LIBS devices, with and without He flow, respectively. Detection limits achieved were in the range 1.18-0.47 wt.%. The best LOD value was obtained in He atmosphere. The LIBS measurement of fluorine content is influenced by different gate widths and the atmosphere in the working chamber. The proposed method was successfully applied to the determination of fluorine concentration in glass ionomer cements.

  9. Use of Laser-Induced Breakdown Spectroscopy for the Detection of Glycemic Elements in Indian Medicinal Plants

    Directory of Open Access Journals (Sweden)

    Prashant Kumar Rai

    2013-01-01

    Full Text Available The demand for interdisciplinary research is increasing in the new millennium to help us understand complex problems and find solutions by integrating the knowledge from different disciplines. The present review is an excellent example of this and shows how unique combination of physics, chemistry, and biological techniques can be used for the evaluation of Indian medicinal herbs used for treating diabetes mellitus. Laser-induced breakdown spectroscopy (LIBS is a sensitive optical technique that is widely used for its simplicity and versatility. This review presents the most recent application of LIBS for detection of glycemic elements in medicinal plants. The characteristics of matrices, object analysis, use of laser system, and analytical performances with respect to Indian herbs are discussed.

  10. Quantitative analysis of Al-Si alloy using calibration free laser induced breakdown spectroscopy (CF-LIBS)

    Science.gov (United States)

    Shakeel, Hira; Haq, S. U.; Aisha, Ghulam; Nadeem, Ali

    2017-06-01

    The quantitative analysis of the standard aluminum-silicon alloy has been performed using calibration free laser induced breakdown spectroscopy (CF-LIBS). The plasma was produced using the fundamental harmonic (1064 nm) of the Nd: YAG laser and the emission spectra were recorded at 3.5 μs detector gate delay. The qualitative analysis of the emission spectra confirms the presence of Mg, Al, Si, Ti, Mn, Fe, Ni, Cu, Zn, Sn, and Pb in the alloy. The background subtracted and self-absorption corrected emission spectra were used for the estimation of plasma temperature as 10 100 ± 300 K. The plasma temperature and self-absorption corrected emission lines of each element have been used for the determination of concentration of each species present in the alloy. The use of corrected emission intensities and accurate evaluation of plasma temperature yield reliable quantitative analysis up to a maximum 2.2% deviation from reference sample concentration.

  11. Laser-induced breakdown spectroscopy used to detect endophyte-mediated accumulation of metals by tall fescue

    Energy Technology Data Exchange (ETDEWEB)

    Martin, Madhavi Z.; Stewart, Arthur J.; Gwinn, Kimberley D.; Waller, John C.

    2010-05-01

    Laser-induced breakdown spectroscopy (LIBS) was used to determine the impact of endophyte (Neotyphodium sp.) infection on elemental composition of tall fescue (Festuca arundinacea). Leaf material from endophyte-infected (E+) and endophyte-free (E-) tall fescue populations in established plots was examined. Leaf-tissue digestates were also tested for metals, by inductively coupled plasma (ICP) mass spectrometry (MS). Seven of eleven metals (Ca, Mg, Fe, Mn, Cu, Ni, and Zn) were measured by both techniques at concentrations great enough for a reliable comparison. Mg, Zn, and Cd, a toxic metal that can be present in forage, were readily detected by LIBS, even though Cd concentrations in the plants were below levels typically achieved using ICP MS detection. Implications of these results for research on forage analysis and phytoremediation are discussed.

  12. Laser-induced Breakdown Spectroscopy used to Detect Endophyte-mediated Accumulation of Metals by Tall Fescue

    Energy Technology Data Exchange (ETDEWEB)

    Martin, Madhavi Z [ORNL; Stewart, Arthur J [ORNL; Gwinn, Dr. Kimberley [University of Tennessee, Knoxville (UTK); Waller, John C [ORNL

    2010-01-01

    Laser-induced breakdown spectroscopy was used to determine the impact of endophyte (Neotyphodium sp.) infection on elemental composition of tall fescue (Festuca arundinacea). Leaf material from endophyte-infected (E+) and endophyte-free (E-) tall fescue populations in established plots was examined. Leaf-tissue digestates were also tested for metals, by ICP-MS. Seven of eleven metals (Ca, Mg, Fe, Mn, Cu, Ni and Zn) were measured by both techniques at concentrations great enough to reliably compare. Mg, Zn, and Cd, a toxic metal that can be present in forage, were readily detected by LIBS, even though Cd concentrations in the plants were below levels typically achieved using ICP-MS detection. Implications of these results for research on forage analysis and phytoremediation are discussed.

  13. High-resolution three-dimensional compositional imaging by double-pulse laser-induced breakdown spectroscopy

    Science.gov (United States)

    Schiavo, C.; Menichetti, L.; Grifoni, E.; Legnaioli, S.; Lorenzetti, G.; Poggialini, F.; Pagnotta, S.; Palleschi, V.

    2016-08-01

    In this paper we present a new instrument specifically realized for high-resolution three-dimensional compositional analysis and mapping of materials. The instrument is based on the coupling of a Double-Pulse Laser-Induced Breakdown Spectroscopy (LIBS) instrument with an optical microscope. The compositional mapping of the samples is obtained by scanning the laser beam across the surface of the sample, while the in depth analysis is performed by sending multiple laser pulses on the same point. Depths of analysis of several tens of microns can be obtained. The instrument presented has definite advantages with respect to Laser Ablation-ICP Mass Spectrometry in many applications related to material analysis, biomedicine and environmental diagnostics. An application to the diagnostics of industrial ceramics is presented, demonstrating the feasibility of Double-Pulse LIBS Imaging and its advantages with respect to conventional single-pulse LIBS imaging.

  14. Application of activated zeolite to quantitative analysis of Pb liquid sample using commercial laser-induced breakdown spectroscopy (LIBS)

    Science.gov (United States)

    Suyanto, H.; Utomo, A. P.; Manurung, M.; Suharta, W. G.; Windaryoto

    2017-04-01

    The aim of this research is to figure out an activated zeolite ability to immobilize Pb element in liquid sample. The zeolite was made into powder with size of about 400 μm and was activated by NaOH with different concentrations of 0.5, 1, 1.5 and 2 M. Prior to being analyzed by commercial Laser-Induced Breakdown Spectroscopy (LIBS) technique, 0.05 gram activated zeolite of each concentration were soaked into 10 ml solution containing 100 ppm of Pb and then heated and stirred until become dry powder. The powder was then made into a pellet. After being analyzed by LIBS, activation by 1.0 M NaOH was the optimum condition for zeolite to immobilize Pb in solution. The minimum concentration of Pb in liquid sample which could be immobilized by this method was about 5.86 ppm.

  15. Characterization of inorganic species in coal by laser-induced breakdown spectroscopy using UV and IR radiations

    Energy Technology Data Exchange (ETDEWEB)

    Mateo, M.P. [Universidad de A Coruna, Departamento de Ingenieria Industrial II, E-15403 Ferrol (A Coruna) (Spain)], E-mail: pazmateo@udc.es; Nicolas, G.; Yanez, A. [Universidad de A Coruna, Departamento de Ingenieria Industrial II, E-15403 Ferrol (A Coruna) (Spain)

    2007-12-15

    In this work, the capability of laser-induced breakdown spectroscopy for process control in a thermal power plant is presented through quantitative compositional characterization of the coal used for combustion. Laser-induced emission signal of seven samples with a range of concentrations was calibrated for quantification purposes. The eighth sample was subsequently analyzed five times as unknown in order to determine the precision and accuracy of the measurements. Two modes of operation, dynamic and static and two laser wavelengths, 1064 nm and 355 nm were employed in this study for comparison. The results revealed that UV wavelength provided better results than IR radiation in terms of accuracy for the quantification of inorganic species in coal after the comparison with conventional atomic absorption spectrometry characterization.

  16. Analysis of waste electrical and electronic equipment (WEEE) using laser induced breakdown spectroscopy (LIBS) and multivariate analysis.

    Science.gov (United States)

    Ángel Aguirre, Miguel; Hidalgo, Montserrat; Canals, Antonio; Nóbrega, Joaquim A; Pereira-Filho, Edenir R

    2013-12-15

    This study shows the application of laser induced breakdown spectroscopy (LIBS) for waste electrical and electronic equipment (WEEE) investigation. Several emission spectra were obtained for 7 different mobiles from 4 different manufacturers. Using the emission spectra of the black components it was possible to see some differences among the manufacturers and some emission lines from organic elements and molecules (N, O, CN and C2) led to the highest contribution for this differentiation. Some polymeric internal parts in contact with the inner pieces of the mobiles and covered with a special paint presented a strong emission signal for Cr. The white pieces presented mainly Al, Ba and Ti in their composition. Finally, this study developed a procedure for LIBS emission spectra using chemometric strategies and suitable information can be obtained for identification of manufacturer and counterfeit products. In addition, the results obtained can improve the classification for establishing recycling strategies of e-waste.

  17. Qualitative and quantitative analysis of milk for the detection of adulteration by Laser Induced Breakdown Spectroscopy (LIBS).

    Science.gov (United States)

    Moncayo, S; Manzoor, S; Rosales, J D; Anzano, J; Caceres, J O

    2017-10-01

    The present work focuses on the development of a fast and cost effective method based on Laser Induced Breakdown Spectroscopy (LIBS) to the quality control, traceability and detection of adulteration in milk. Two adulteration cases have been studied; a qualitative analysis for the discrimination between different milk blends and quantification of melamine in adulterated toddler milk powder. Principal Component Analysis (PCA) and neural networks (NN) have been used to analyze LIBS spectra obtaining a correct classification rate of 98% with a 100% of robustness. For the quantification of melamine, two methodologies have been developed; univariate analysis using CN emission band and multivariate calibration NN model obtaining correlation coefficient (R(2)) values of 0.982 and 0.999 respectively. The results of the use of LIBS technique coupled with chemometric analysis are discussed in terms of its potential use in the food industry to perform the quality control of this dairy product. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. Laser-induced breakdown spectroscopy (LIBS): an overview of recent progress and future potential for biomedical applications.

    Science.gov (United States)

    Rehse, S J; Salimnia, H; Miziolek, A W

    2012-02-01

    The recent progress made in developing laser-induced breakdown spectroscopy (LIBS) has transformed LIBS from an elemental analysis technique to one that can be applied for the reagentless analysis of molecularly complex biological materials or clinical specimens. Rapid advances in the LIBS technology have spawned a growing number of recently published articles in peer-reviewed journals which have consistently demonstrated the capability of LIBS to rapidly detect, biochemically characterize and analyse, and/or accurately identify various biological, biomedical or clinical samples. These analyses are inherently real-time, require no sample preparation, and offer high sensitivity and specificity. This overview of the biomedical applications of LIBS is meant to summarize the research that has been performed to date, as well as to suggest to health care providers several possible specific future applications which, if successfully implemented, would be significantly beneficial to humankind.

  19. Discrimination of patients with diabetes mellitus and healthy subjects based on laser-induced breakdown spectroscopy of their fingernails.

    Science.gov (United States)

    Bahreini, Maryam; Ashrafkhani, Behnam; Tavassoli, Seyed Hassan

    2013-10-01

    Laser-induced breakdown spectroscopy (LIBS) is applied to investigate the effect of diabetes mellitus (DM) on the elemental composition of fingernails. Measurements are carried out on 85 fingernail clippings including 51 diabetic and 34 control subjects. An auto-focus system has been designed and used in experiments to improve the repeatability of LIBS measurements. Classification of diabetic and nondiabetic subjects is examined using discriminant function analysis (DFA) method. This classification is based on 82 atomic, ionic, and molecular emission lines belonging to 13 elements as well as one molecule of fingernails. Emission lines that can be used as the best predictors are identified. The possibility of using this method for screening purposes is discussed based on the classification results. This preliminary work shows the ability of LIBS of fingernails in discrimination of DM patients and nondiabetic subjects using DFA method and its feasibility in screening purposes.

  20. Non-gated laser induced breakdown spectroscopy provides a powerful segmentation tool on concomitant treatment of characteristic and continuum emission.

    Science.gov (United States)

    Myakalwar, Ashwin Kumar; Dingari, Narahara Chari; Dasari, Ramachandra Rao; Barman, Ishan; Gundawar, Manoj Kumar

    2014-01-01

    We demonstrate the application of non-gated laser induced breakdown spectroscopy (LIBS) for characterization and classification of organic materials with similar chemical composition. While use of such a system introduces substantive continuum background in the spectral dataset, we show that appropriate treatment of the continuum and characteristic emission results in accurate discrimination of pharmaceutical formulations of similar stoichiometry. Specifically, our results suggest that near-perfect classification can be obtained by employing suitable multivariate analysis on the acquired spectra, without prior removal of the continuum background. Indeed, we conjecture that pre-processing in the form of background removal may introduce spurious features in the signal. Our findings in this report significantly advance the prior results in time-integrated LIBS application and suggest the possibility of a portable, non-gated LIBS system as a process analytical tool, given its simple instrumentation needs, real-time capability and lack of sample preparation requirements.

  1. Non-gated laser induced breakdown spectroscopy provides a powerful segmentation tool on concomitant treatment of characteristic and continuum emission.

    Directory of Open Access Journals (Sweden)

    Ashwin Kumar Myakalwar

    Full Text Available We demonstrate the application of non-gated laser induced breakdown spectroscopy (LIBS for characterization and classification of organic materials with similar chemical composition. While use of such a system introduces substantive continuum background in the spectral dataset, we show that appropriate treatment of the continuum and characteristic emission results in accurate discrimination of pharmaceutical formulations of similar stoichiometry. Specifically, our results suggest that near-perfect classification can be obtained by employing suitable multivariate analysis on the acquired spectra, without prior removal of the continuum background. Indeed, we conjecture that pre-processing in the form of background removal may introduce spurious features in the signal. Our findings in this report significantly advance the prior results in time-integrated LIBS application and suggest the possibility of a portable, non-gated LIBS system as a process analytical tool, given its simple instrumentation needs, real-time capability and lack of sample preparation requirements.

  2. Location and detection of explosive-contaminated human fingerprints on distant targets using standoff laser-induced breakdown spectroscopy

    Science.gov (United States)

    Lucena, P.; Gaona, I.; Moros, J.; Laserna, J. J.

    2013-07-01

    Detection of explosive-contaminated human fingerprints constitutes an analytical challenge of high significance in security issues and in forensic sciences. The use of a laser-induced breakdown spectroscopy (LIBS) sensor working at 31 m distance to the target, fitted with 2D scanning capabilities and designed for capturing spectral information from laser-induced plasmas of fingerprints is presented. Distribution chemical maps based on Na and CN emissions are used to locate and detect chloratite, DNT, TNT, RDX and PETN residues that have been deposited on the surface of aluminum and glass substrates. An effectiveness of 100% on fingerprints detection, regardless the substrate scanned, is reached. Environmental factors that affect the prevalence of the fingerprint LIBS response are discussed.

  3. Analysis of oxide inclusions in steel by fast laser-induced breakdown spectroscopy scanning: an approach to quantification.

    Science.gov (United States)

    Boué-Bigne, F

    2007-03-01

    Laser-induced breakdown spectroscopy (LIBS) measurements were performed on a steel sample to investigate the feasibility of obtaining fast information on cleanness. A calibration approach was considered to enable the quantification of the elemental composition of non-metallic inclusions; the same data was also used to estimate the size of the inclusions. For the first time, the quantified chemical composition data obtained by LIBS for non-metallic inclusions was compared to the corresponding results obtained from scanning electron microscopy-energy dispersive X-ray (SEM-EDX) analysis, the conventional method used for steel cleanness assessment, and proved successful. Due to the speed of analysis and the systematic recording of the signal from the scanned area, LIBS enables the analysis of larger areas of sample and in significantly shorter time than with automated SEM-EDX. This paper summarizes the hitherto obtained results for the fast analysis of inclusions in steel by LIBS.

  4. Can the provenance of the conflict minerals columbite and tantalite be ascertained by laser-induced breakdown spectroscopy?

    Science.gov (United States)

    Harmon, Russell S; Shughrue, Katrina M; Remus, Jeremiah J; Wise, Michael A; East, Lucille J; Hark, Richard R

    2011-07-01

    Conflict minerals is a term applied to ores mined in conditions of armed conflict and human rights abuse. Niobium and tantalum are two rare metals whose primary natural occurrence is in the complex oxide minerals columbite and tantalite, the ore of which is commonly referred to as coltan. The illicit export of coltan ore from the Democratic Republic of the Congo is thought to be responsible for financing the ongoing civil conflicts in this region. Determining the chemical composition of an ore is one of the means of ascertaining its provenance. Laser-induced breakdown spectroscopy (LIBS) offers a means of rapidly distinguishing different geographic sources for a mineral because the LIBS plasma emission spectrum provides the complete chemical composition (i.e., "chemical fingerprint") of any material in real time. To test this idea for columbite-tantalite, three sample sets were analyzed. Partial least squares discriminant analysis (PLSDA) allows correct sample-level geographic discrimination at a success rate exceeding 90%.

  5. The application of spectrum standardization method for carbon analysis in coal using laser-induced breakdown spectroscopy

    CERN Document Server

    Li, Xiongwei; Fu, Yangting; Li, Zheng; Liu, Jianming; Ni, Weidou

    2014-01-01

    Measurements of carbon content in coal using laser-induced breakdown spectroscopy (LIBS) is limited by its low measurement precision and accuracy. A spectrum standardization method was proposed to achieve both reproducible and accurate results for the quantitative analysis of carbon content in coal with LIBS. The proposed method utilized the molecular carbon emissions to compensate the diminution of atomic carbon emission caused by matrix effect. The compensated carbon line intensities were further converted into an assumed standard state with fixed plasma temperature, electron density, and total number density of elemental carbon, which is proportional to its concentration in the coal samples. In addition, in order to obtained better compensation for total carbon number density fluctuations, an iterative algorithm was applied, which is different from our previous standardization calculations. The modified spectrum standardization model was applied to the measurement of carbon content in 24 bituminous coal sa...

  6. Assessment of statistical uncertainty in the quantitative analysis of solid samples in motion using laser-induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Cabalin, L.M.; Gonzalez, A. [Department of Analytical Chemistry, University of Malaga, E-29071 Malaga (Spain); Ruiz, J. [Department of Applied Physics I, University of Malaga, E-29071 Malaga (Spain); Laserna, J.J., E-mail: laserna@uma.e [Department of Analytical Chemistry, University of Malaga, E-29071 Malaga (Spain)

    2010-08-15

    Statistical uncertainty in the quantitative analysis of solid samples in motion by laser-induced breakdown spectroscopy (LIBS) has been assessed. For this purpose, a LIBS demonstrator was designed and constructed in our laboratory. The LIBS system consisted of a laboratory-scale conveyor belt, a compact optical module and a Nd:YAG laser operating at 532 nm. The speed of the conveyor belt was variable and could be adjusted up to a maximum speed of 2 m s{sup -1}. Statistical uncertainty in the analytical measurements was estimated in terms of precision (reproducibility and repeatability) and accuracy. The results obtained by LIBS on shredded scrap samples under real conditions have demonstrated that the analytical precision and accuracy of LIBS is dependent on the sample geometry, position on the conveyor belt and surface cleanliness. Flat, relatively clean scrap samples exhibited acceptable reproducibility and repeatability; by contrast, samples with an irregular shape or a dirty surface exhibited a poor relative standard deviation.

  7. Study on the effect of beam propagation through atmospheric turbulence on standoff nanosecond laser induced breakdown spectroscopy measurements.

    Science.gov (United States)

    Laserna, J J; Reyes, R Fernández; González, R; Tobaria, L; Lucena, P

    2009-06-08

    We report on an experimental study of the effect of atmospheric turbulence on laser induced breakdown spectroscopy (LIBS) measurements. The characteristics of the atmosphere dictate specific performance constraints to this technology. Unlike classical laboratory LIBS systems where the distance to the sample is well known and characterized, LIBS systems working at several tens of meters to the target have specific atmospheric propagation conditions that cause the quality of the LIBS signals to be affected to a significant extent. Using a new LIBS based sensor system fitted with a nanosecond laser emitting at 1064 nm, propagation effects at distances of up to 120 m were investigated. The effects observed include wander and scintillation in the outgoing laser beam and in the return atomic emission signal. Plasmas were formed on aluminium targets. Average signal levels and signal fluctuations are measured so the effect of atmospheric turbulence on LIBS measurements is quantified.

  8. Discrimination of healthy and carious teeth using laser-induced breakdown spectroscopy and partial least square discriminant analysis.

    Science.gov (United States)

    Gazmeh, Meisam; Bahreini, Maryam; Tavassoli, Seyed Hassan

    2015-01-01

    In the laser drilling of teeth, a microplasma is generated which may be utilized for elemental analysis of ablated tissue via a laser-induced breakdown spectroscopy (LIBS) technique. In this study, LIBS is used to investigate the possibility of discrimination of healthy and carious tooth tissues. This possibility is examined using multivariate statistical analysis called partial least square discriminant analysis (PLS-DA) based on atomic and ionic emission lines of teeth LIBS spectra belonging to P, Ca, Mg, Zn, K, Sr, C, Na, H, and O elements. Results show an excellent discrimination and prediction of unknown tooth tissues. It is shown that using the PLS-DA method, the spectroscopic analysis of plasma emission during the laser drilling, would be a promising technique for caries detection.

  9. Calibration-free quantitative analysis of elemental ratios in intermetallic nanoalloys and nanocomposites using Laser Induced Breakdown Spectroscopy (LIBS).

    Science.gov (United States)

    Davari, Seyyed Ali; Hu, Sheng; Mukherjee, Dibyendu

    2017-03-01

    Intermetallic nanoalloys (NAs) and nanocomposites (NCs) have increasingly gained prominence as efficient catalytic materials in electrochemical energy conversion and storage systems. But their morphology and chemical compositions play critical role in tuning their catalytic activities, and precious metal contents. While advanced microscopy techniques facilitate morphological characterizations, traditional chemical characterizations are either qualitative or extremely involved. In this study, we apply Laser Induced Breakdown Spectroscopy (LIBS) for quantitative compositional analysis of NAs and NCs synthesized with varied elemental ratios by our in-house built pulsed laser ablation technique. Specifically, elemental ratios of binary PtNi, PdCo (NAs) and PtCo (NCs) of different compositions are determined from LIBS measurements employing an internal calibration scheme using the bulk matrix species as internal standards. Morphology and qualitative elemental compositions of the aforesaid NAs and NCs are confirmed from Transmission Electron Microscopy (TEM) images and Energy Dispersive X-ray Spectroscopy (EDX) measurements. LIBS experiments are carried out in ambient conditions with the NA and NC samples drop cast on silicon wafers after centrifugation to increase their concentrations. The technique does not call for cumbersome sample preparations including acid digestions and external calibration standards commonly required in Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES) techniques. Yet the quantitative LIBS results are in good agreement with the results from ICP-OES measurements. Our results indicate the feasibility of using LIBS in future for rapid and in-situ quantitative chemical characterizations of wide classes of synthesized NAs and NCs.

  10. Study of deuterium retention on lithiated tungsten exposed to high-flux deuterium plasma using laser-induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Li, Cong; Wu, Xingwei; Zhang, Chenfei [Key Laboratory of Materials Modification by Laser, Ion and Electron Beams, Chinese Ministry of Education, School of Physics and Optical Electronic Technology, Dalian University of Technology, Dalian 116024 (China); Ding, Hongbin, E-mail: hding@dlut.edu.cn [Key Laboratory of Materials Modification by Laser, Ion and Electron Beams, Chinese Ministry of Education, School of Physics and Optical Electronic Technology, Dalian University of Technology, Dalian 116024 (China); De Temmerman, G., E-mail: G.C.DeTemmerman@differ.nl [FOM Institute DIFFER, Dutch Institute for Fundamental Energy Research, Association EURATOM-FOM, Trilateral Euregio Cluster, P.O. Box 1207, 3430 BE Nieuwegein (Netherlands); Meiden, H.J. van der [FOM Institute DIFFER, Dutch Institute for Fundamental Energy Research, Association EURATOM-FOM, Trilateral Euregio Cluster, P.O. Box 1207, 3430 BE Nieuwegein (Netherlands)

    2014-10-15

    Highlights: • Deuterium retention effects on both pure tungsten and lithiated tungsten have been investigated in the linear plasma simulator Magnum-PSI by an in-situ laser-induced breakdown spectroscopy. • The lithiation can inhibit the blistering on tungsten surface. • The re-deposition of lithium results in the formation of chemical state of Li{sub 2}CO{sub 3} and tungsten oxides on a fresh surface of tungsten. - Abstract: Tungsten is under consideration for use as a plasma-facing material in the divertor region of ITER. Lithiation can significantly improve plasma performance in long-pulse tokamaks like EAST. The investigation of lithiated tungsten is important for understanding the lithium conditioning effects for EAST, where tungsten will be used as a plasma-facing material. In this paper, a few important issues of lithiated tungsten interacting with high-flux deuterium plasma have been studied, such as the effect of lithiation on deuterium retention, the profile of elemental distribution, and the chemical state of lithiated tungsten. Deuterium retention inside both pure and lithiated tungsten has been investigated for the first time in the linear plasma simulator Magnum-PSI by in-situ laser induced breakdown spectroscopy (LIBS). The results indicate that, after deuterium plasma exposure, deuterium retention could be saturated in the lithiation layer, and the lithium in the lithiated layer is chemically bound with deuterium. Moreover, the lithiation can inhibit the blistering on the tungsten surface. These results can be valuable for the application of LIBS as a diagnostic technique for plasma-facing components of tokamaks.

  11. An investigation of Laser Induced Breakdown Spectroscopy for use as a control in the laser removal of rock from fossils found at the Malapa hominin site, South Africa

    CSIR Research Space (South Africa)

    Roberts, DE

    2012-07-01

    Full Text Available Laser Induced Breakdown Spectroscopy (LIBS) was used to study the spectra from fossils and surrounding rock recovered from the Cradle of Mankind site at Malapa, South Africa. The objective was to find a suitable spectral line(s), specific to fossils...

  12. Laser-induced breakdown spectroscopy (LIBS) technique for the determination of the chemical composition of complex inorganic materials

    Science.gov (United States)

    Łazarek, Łukasz; Antończak, Arkadiusz J.; Wójcik, Michał R.; Kozioł, Paweł E.; Stepak, Bogusz; Abramski, Krzysztof M.

    2014-08-01

    Laser-induced breakdown spectroscopy (LIBS) is a fast, fully optical method, that needs little or no sample preparation. In this technique qualitative and quantitative analysis is based on comparison. The determination of composition is generally based on the construction of a calibration curve namely the LIBS signal versus the concentration of the analyte. Typically, to calibrate the system, certified reference materials with known elemental composition are used. Nevertheless, such samples due to differences in the overall composition with respect to the used complex inorganic materials can influence significantly on the accuracy. There are also some intermediate factors which can cause imprecision in measurements, such as optical absorption, surface structure, thermal conductivity etc. This paper presents the calibration procedure performed with especially prepared pellets from the tested materials, which composition was previously defined. We also proposed methods of post-processing which allowed for mitigation of the matrix effects and for a reliable and accurate analysis. This technique was implemented for determination of trace elements in industrial copper concentrates standardized by conventional atomic absorption spectroscopy with a flame atomizer. A series of copper flotation concentrate samples was analyzed for contents of three elements, that is silver, cobalt and vanadium. It has been shown that the described technique can be used to qualitative and quantitative analyses of complex inorganic materials, such as copper flotation concentrates.

  13. Evaluation of the laser-induced breakdown spectroscopy technique for determination of the chemical composition of copper concentrates

    Science.gov (United States)

    Łazarek, Łukasz; Antończak, Arkadiusz J.; Wójcik, Michał R.; Drzymała, Jan; Abramski, Krzysztof M.

    2014-07-01

    Laser-induced breakdown spectroscopy (LIBS), like many other spectroscopic techniques, is a comparative method. Typically, in qualitative analysis, synthetic certified standard with a well-known elemental composition is used to calibrate the system. Nevertheless, in all laser-induced techniques, such calibration can affect the accuracy through differences in the overall composition of the chosen standard. There are also some intermediate factors, which can cause imprecision in measurements, such as optical absorption, surface structure and thermal conductivity. In this work the calibration performed for the LIBS technique utilizes pellets made directly from the tested materials (old well-characterized samples). This choice produces a considerable improvement in the accuracy of the method. This technique was adopted for the determination of trace elements in industrial copper concentrates, standardized by conventional atomic absorption spectroscopy with a flame atomizer. A series of copper flotation concentrate samples was analyzed for three elements: silver, cobalt and vanadium. We also proposed a method of post-processing the measurement data to minimize matrix effects and permit reliable analysis. It has been shown that the described technique can be used in qualitative and quantitative analyses of complex inorganic materials, such as copper flotation concentrates. It was noted that the final validation of such methodology is limited mainly by the accuracy of the characterization of the standards.

  14. Detection of chromium in wastewater from refuse incineration power plant near Poyang Lake by laser induced breakdown spectroscopy.

    Science.gov (United States)

    Yao, Mingyin; Lin, Jinlong; Liu, Muhua; Xu, Yuan

    2012-04-01

    A laser induced breakdown spectroscopy (LIBS) system was developed for determination of toxic metals Cr in wastewater collected from a refuse incineration power plant near Poyang Lake. The plasma was generated by focusing a pulsed Nd:YAG laser at 1064 nm on the surface of liquid. Experimental conditions were optimized for improving the sensitivity and repeatability of the LIBS system through a parametric dependence study in potassium bichromate (K(2)Cr(2)O(7)) aqueous solutions. Calibration curves for Cr I 425.43 and 357.87 nm lines are compared and the limit of detection is found to be 39 and 86 ppm, respectively. This calibration curve of Cr I 425.43 nm has been used for quantification of Cr in wastewater collected from a refuse incineration power plant near Poyang Lake where the concentration of Cr is found to be 97 ppm. The results between LIBS and standard analytical technique such as atomic absorption spectroscopy were compared, and the relative standard deviation was 8.5%.

  15. Assessment of the concentration of Cr, Mn and Fe in sediment using laser-induced breakdown spectroscopy

    Directory of Open Access Journals (Sweden)

    R. I. McCrindle

    2013-04-01

    Full Text Available In the present study, laser-induced breakdown spectroscopy (LIBS has been applied for the determination of levels of Cr, Mn and Fe in sediment samples and the results have been compared with that of flame-atomic absorption spectroscopy (F-AAS. Fourteen sediment samples were collected from Tinishu Akaki River (TAR, Addis Ababa, Ethiopia. Pellets of 24 mm in diameter and 3-5 mm in thickness were prepared using a manual hydraulic press under a pressure of 8000 psi by mixing finely ground sediment samples with boric acid. The concentrations of Cr, Mn and Fe were successfully determined by Q-switched Nd:YAG laser at 1064 nm. Quantification of these metals was conducted against certified reference materials of sediments and soils. The LIBS results for the elements varied from 0.060–0.707 mg/g for Cr, 0.895–3.64 mg/g for Mn and 26.9–71.8 mg/g for Fe. The F-AAS results varied from 0.061–1.37 mg/g for Cr, 1.24–4.46 mg/g for Mn and 49.0–83.3 mg/g for Fe. TAR was found to be heavily polluted with Cr.DOI: http://dx.doi.org/10.4314/bcse.v27i1.1

  16. Laser Induced breakdown spectroscopy: A rapid tool for the identification and quantification of minerals in cucurbit seeds.

    Science.gov (United States)

    Singh, Jyotsana; Kumar, Rohit; Awasthi, Shikha; Singh, Vinti; Rai, A K

    2017-04-15

    Laser-induced breakdown spectroscopy (LIBS) was investigated to estimate the viability as a simple and rapid method for analysis of nutrient elements in seed kernels of cucurbits. LIBS spectra were recorded in the range of 200-975nm by using Q-switched Nd:YAG laser at 532nm (4ns, 10Hz) attached to echelle spectrometer with intensified charged coupled device (ICCD). The spectral analysis revealed the presence of several elements like C, O, N, Mg, Ca, Na and K in seeds. The quantification of elements (Mg, Ca, Na and K) through LIBS was done using calibration curve method in which all calibration curve shows good linearity (r>0.95). The result obtained through LIBS was in reasonable agreement with that obtained through atomic absorption spectroscopy (AAS). Principal Component Analysis (PCA) was also applied to the LIBS data for rapid categorization of seed samples belonging to same species although samples have similar nutrient elements. Copyright © 2016 Elsevier Ltd. All rights reserved.

  17. Characteristics of the ablation plume induced on glasses for analysis purposes with laser-induced breakdown spectroscopy

    Science.gov (United States)

    Tian, Ye; Sokolova, Ekaterina B.; Zheng, Ronger; Ma, Qianli; Chen, Yanping; Yu, Jin

    2015-12-01

    Laser-induced breakdown spectroscopy (LIBS) has been demonstrated as an efficient tool for elemental analyses of transparent dielectric materials such as glasses or crystals for more than ten years. The induced plasma is however much less studied compared to that induced on the surface of a metal. The purpose of this work is therefore to characterize the plasma induced on the surface of a glass sample for analytical purpose as a function of the ablation laser wavelength, infrared (IR) or ultraviolet (UV), and the ambient gas, air or argon. The surface damage of the samples was also observed for ablation with IR or UV laser pulse when the sample was a float glass or a frosted one. Optimized ablation fluence was then determined. The morphology of the plasma was observed with time-resolved spectroscopic imaging, while the profiles of the electron density and temperature were extracted from time- and space-resolved emission spectroscopy. The analytical performance of the plasmas was then studied in terms of the signal-to-noise ratio for several emission lines from some minor elements, Al, Fe, contained in glasses, and of the behavior of self-absorption for another minor element, Ca, in the different ablation conditions.

  18. Quantitative analysis of soil calcium by laser-induced breakdown spectroscopy using addition and addition-internal standardizations

    Science.gov (United States)

    Shirvani-Mahdavi, Hamidreza; Shafiee, Parisa

    2016-12-01

    Matrix mismatching in the quantitative analysis of materials through calibration-based laser-induced breakdown spectroscopy (LIBS) is a serious problem. In this paper, to overcome the matrix mismatching, two distinct approaches named addition standardization (AS) and addition-internal combinatorial standardization (A-ICS) are demonstrated for LIBS experiments. Furthermore, in order to examine the efficiency of these methods, the concentration of calcium in ordinary garden soil without any fertilizer is individually measured by each of the two procedures. To achieve this purpose, ten standard samples with different concentrations of calcium (as the analyte) and copper (as the internal standard) are prepared in the form of cylindrical tablets, so that the soil plays the role of the matrix in all of them. The measurements indicate that the relative error of concentration compared to a certified value derived by induced coupled plasma optical emission spectroscopy is 3.97% and 2.23% for AS and A-ICS methods, respectively. Furthermore, calculations related to standard deviation indicates that A-ICS method may be more accurate than AS one.

  19. Detection of carcinogenic chromium in synthetic hair dyes using laser induced breakdown spectroscopy.

    Science.gov (United States)

    Gondal, M A; Maganda, Y W; Dastageer, M A; Al Adel, F F; Naqvi, A A; Qahtan, T F

    2014-03-10

    A laser induced breakdown spectroscopic (LIBS) system, consisting of a pulsed 266 nm laser radiation, in conjunction with a high-resolution spectrograph, a gated intensified charge coupled device camera, and a built-in delay generator were used to develop a sensitive detector to quantify the concentration of toxic substances such as chromium in synthetic hair dyes available on the local market. The strong atomic transition line of chromium (Cr I) at 427.5 nm wavelength was used as a fingerprint wavelength to calibrate the detection system and also to quantify the levels of chromium in the hair dye samples. The limit of detection achieved by our LIBS detection system for chromium was 1.2 ppm, which enabled us to detect chromium concentration in the range of 5-11 ppm in the commercial hair dyes available on the local market. The concentrations of chromium in the hair dyes measured using our system were validated using a standard analytical technique such as inductively coupled plasma mass spectrometry (ICPMS), and acceptable agreement (nearly 8%) was found between the results obtained by the two methods (LIBS and ICPMS). This study is highly significant for human health, specifically for people using synthetic hair dyes for changing the color of their hair.

  20. Unexpected temporal evolution of atomic spectral lines of aluminum in a laser induced breakdown spectroscopy experiment

    Energy Technology Data Exchange (ETDEWEB)

    Saad, Rawad, E-mail: rawad.saad@cea.fr [CEA, DEN, DPC, SEARS, LANIE, 91191 Gif-sur-Yvette (France); L' Hermite, Daniel, E-mail: daniel.lhermite@cea.fr [CEA, DEN, DPC, SEARS, LANIE, 91191 Gif-sur-Yvette (France); Bousquet, Bruno, E-mail: bruno.bousquet@u-bordeaux1.fr [LOMA, Université de Bordeaux, CNRS, 351 Cours de la Libération, 33405 Talence Cedex (France)

    2014-11-01

    The temporal evolution of the laser induced breakdown (LIBS) signal of a pure aluminum sample was studied under nitrogen and air atmospheres. In addition to the usual decrease of signal due to plasma cooling, unexpected temporal evolutions were observed for a spectral lines of aluminum, which revealed the existence of collisional energy transfer effects. Furthermore, molecular bands of AlN and AlO were observed in the LIBS spectra, indicating recombination of aluminum with the ambient gas. Within the experimental conditions reported in this study, both collisional energy transfer and recombination processes occurred around 1.5 μs after the laser shot. This highlights the possible influence of collisional and chemical effects inside the plasma that can play a role on LIBS signals. - Highlights: • Persistence of two Al I lines related to the 61,844 cm{sup −1} energy level only under nitrogen atmosphere. • Collisional energy transfer effect exists between aluminum and nitrogen. • Observation of molecular band of AlN (under nitrogen) and AlO (under air) after a delay time of 1.5 µs. • 20% of oxygen in air is sufficient to annihilate both the collisional energy transfer effect and the AlN molecular formation.

  1. The role of plasma shielding in collinear double-pulse femtosecond laser-induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Penczak, John [Department of Chemistry (m/c 111), University of Illinois at Chicago, Chicago, IL 60680-7061 (United States); Kupfer, Rotem; Bar, Ilana [Department of Physics, Ben-Gurion University of the Negev, Beer-Sheva 84105 (Israel); Gordon, Robert J. [Department of Chemistry (m/c 111), University of Illinois at Chicago, Chicago, IL 60680-7061 (United States)

    2014-07-01

    We report an experimental and theoretical study of the mechanism for the enhancement of the laser-induced breakdown signal produced by two collinear femtosecond pulses separated by a suitable delay. A bilayer sample consisting of a 500 nm thick film of Ag deposited on Al was used in the experiments, and a particle-in-cell (PIC) simulation was implemented in the theoretical part of the study. Experiments on the effect of laser polarization, performed at a 30° angle of incidence over a wide range of fluences, together with the PIC results, showed that the plasma produced by the first pulse was further excited by the second pulse. Experiments at normal incidence and a fluence of 200 J/cm{sup 2} showed that the second pulse did not penetrate the Ag layer. In addition, measurements of the effect of pulse delay on the signal supported the conclusion that double pulse enhancement is produced by plasma heating rather than by increased surface ablation. - Highlights: • We study the mechanism for collinear double-pulse enhancement of LIBS produced by a fs laser. • We use a bilayer of Ag on Al to determine which region is reached by the 2nd pulse. • Signal enhancement is produced by plasma heating rather than by increased surface ablation. • Particle-in-cell calculations show that plasma shielding plays a key role.

  2. Discrimination between authentic and false tax stamps from liquor bottles using laser-induced breakdown spectroscopy and chemometrics

    Energy Technology Data Exchange (ETDEWEB)

    Gonzaga, Fabiano Barbieri, E-mail: fbgonzaga@inmetro.gov.br [Chemical Metrology Division, National Institute of Metrology, Quality and Technology (INMETRO), Av. Nossa Senhora das Graças, 50, Xerém, 25250-020 Duque de Caxias, RJ (Brazil); Rocha, Werickson Fortunato de Carvalho [Chemical Metrology Division, National Institute of Metrology, Quality and Technology (INMETRO), Av. Nossa Senhora das Graças, 50, Xerém, 25250-020 Duque de Caxias, RJ (Brazil); Correa, Deleon Nascimento [Technical–Scientific Police Superintendency, Criminalistic Institute Dr. Octávio Eduardo de Brito Alvarenga—IC-SPTC-SP, 05507-060 São Paulo, SP (Brazil)

    2015-07-01

    This work describes the preliminary application of a compact and low-cost laser-induced breakdown spectroscopy (LIBS) instrument for falsification detection of tax stamps used in alcoholic beverages. The new instrument was based on a diode-pumped passively Q-switched Nd:YLF microchip laser and a mini-spectrometer containing a Czerny–Turner polichromator coupled to a non-intensified, non-gated, and non-cooled 2048 pixel linear sensor array (200 to 850 nm spectral range). Twenty-three tax stamp samples were analyzed by firing laser pulses within two different regions of each sample: a hologram and a blank paper region. For each acquired spectrum, the emitted radiation was integrated for 3000 ms under the continuous application of laser pulses at 100 Hz (integration of 300 plasmas). Principal component analysis (PCA) or hierarchical cluster analysis (HCA) of all emission spectra from the hologram or blank paper region revealed two well-defined groups of authentic and false samples. Moreover, for the hologram data, three subgroups of false samples were found. Additionally, partial least squares discriminant analysis (PLS-DA) was successfully applied for the detection of the false tax stamps using all emission spectra from hologram or blank paper region. The discrimination between the samples was mostly ascribed to different levels of calcium concentration in the samples. - Highlights: • Compact and low-cost laser-induced breakdown spectrometer • Analysis of tax stamps used in alcoholic beverages • Detection of false tax stamps using the LIBS spectra and chemometrics • Falsification detection ascribed to different levels of calcium concentration.

  3. Atomic structure of machined semiconducting chips: An x-ray absorption spectroscopy study

    Energy Technology Data Exchange (ETDEWEB)

    Paesler, M.; Sayers, D.

    1988-12-01

    X-ray absorption spectroscopy (XAS) has been used to examine the atomic structure of chips of germanium that were produced by single point diamond machining. It is demonstrated that although the local (nearest neighbor) atomic structure is experimentally quite similar to that of single crystal specimens information from more distant atoms indicates the presence of considerable stress. An outline of the technique is given and the strength of XAS in studying the machining process is demonstrated.

  4. Laser-Induced Breakdown Spectroscopy to high-resolution analysis of ion distribution in cement-bound solid; Laser-induzierte Breakdown Spektroskopie (LIBS) zur hochaufloesenden Analyse der Ionenverteilung in zementgebundenen Feststoffen

    Energy Technology Data Exchange (ETDEWEB)

    Molkenthin, Andre

    2009-06-03

    The Laser-Induced Breakdown Spectroscopy allows imaging and quantitative analysis of the ion distribution of all relevant elements on the surface of mineral building materials. The measuring system has been characterised by investigations on specimens of hardened cement paste, mortar and concrete. Transport and accumulation processes are visualised. Besides, results are introduced for the peripheral zone close to the surface and the extraction is shown. (orig.) [German] Die Laser-induzierte Breakdown Spektroskopie ermoeglicht eine bildgebende und quantitative Analyse der Ionenverteilung aller massgeblichen Elemente auf mineralischen Baustoffoberflaechen. Das Messsystem wurde durch verfahrenspezifische Untersuchungen an Proben aus Zementstein, -moerteln und Betonen charakterisiert, Transport- und Anlagerungsprozesse wurden visuell dargestellt. Zudem werden Ergebnisse fuer den Ionenhaushalt in der ungestoerten oberflaechenahen Randzone sowie bei deren Auslaugung bzw. Anreicherung vorgestellt.

  5. STUDI PERBANDINGAN ANALISIS UNSUR PLUMBUM (PB DARI HASIL ELEKTROLISIS ANTARA METODE LASER- INDUCED BREAKDOWN SPECTROSCOPY (LIBS DENGAN METODE KONVENSIONAL

    Directory of Open Access Journals (Sweden)

    H. S. Suyanto

    2014-07-01

    Full Text Available Penelitian ini bertujuan menganalisis unsur Pb hasil proses elektrolisis dengan metode alternatif laser-induced breakdown spectroscopy (LIBS dan metode konvensional. Elektrolisis menggunakan tembaga (Cu sebagai katoda dan karbon sebagai anoda. Unsur Pb yang terdeposisi pada katoda diirradiasi laser Nd-YAG (model CFR 200, 1064nm dan emisinya (Pb I 405.7 nm ditangkap spektrometer HR 2500++ yang kemudian ditampilkan dalam intensitas fungsi panjang gelombang. Hasil penelitian menunjukkan bahwa energi laser, arus listrik dan waktu deposisi proses elektrolisis yang optimum untuk karakterisasi unsur Pb masing - masing adalah 100 mJ, 5,28 mA dan 15 menit. Aplikasi metode ini untuk analisis kuantitatif larutan Pb dengan membuat kurva kalibrasi dari kosentrasi 300 ppm sampai kosentrasi terendah yaitu 0,5 ppm, serta diperoleh deteksi limit sebesar 0,44 ppm. Sebagai perbandingan metode deteksi dengan LIBS ini telah dilakukan analisis dengan metode konvensional dengan menentukan selisih massa katoda sebelum dan sesudah elektrolisis dan diperoleh hasil yang sebanding.ABSTRACTThe aim of this research was to compare between a method of laser-induced breakdown spectroscopy (LIBS and the conventional one to analyse of Plumbum (Pb element resulted from electrolysis process. Electrolysis used copper (Cu and carbon (C as cathode and anode respectively. Plumbum element which was deposited on cathode was irradiated by Nd-YAG laser (model CFR 200, 1064nm and its emission intensity of neutral Pb I 405.7 nm in the plasma was captured by HR 2500++ spectrometer and displayed in a form of intensity as a function of wavelength. The experiment result showed that the optimum condition parameters of electrolysis: laser energy, electric current and electrolysis time duration were 100 mJ, 5.28 mA and 15 minutes respectively. An application of these conditions was done to make calibration curve of Pb element in liquid sample from 300 ppm to 0.5 ppm and resulted a limit of

  6. STUDI PERBANDINGAN ANALISIS UNSUR PLUMBUM (PB DARI HASIL ELEKTROLISIS ANTARA METODE LASER- INDUCED BREAKDOWN SPECTROSCOPY (LIBS DENGAN METODE KONVENSIONAL

    Directory of Open Access Journals (Sweden)

    H. S. Suyanto

    2014-07-01

    Full Text Available Penelitian ini bertujuan menganalisis unsur Pb hasil proses elektrolisis dengan metode alternatif laser-induced breakdown spectroscopy (LIBS dan metode konvensional. Elektrolisis menggunakan tembaga (Cu sebagai katoda dan karbon sebagai anoda. Unsur Pb yang terdeposisi pada katoda diirradiasi laser Nd-YAG (model CFR 200, 1064nm dan emisinya (Pb I 405.7 nm ditangkap spektrometer HR 2500++ yang kemudian ditampilkan dalam intensitas fungsi panjang gelombang. Hasil penelitian menunjukkan bahwa energi laser, arus listrik dan waktu deposisi proses elektrolisis yang optimum untuk karakterisasi unsur Pb masing - masing adalah 100 mJ, 5,28 mA dan 15 menit. Aplikasi metode ini untuk analisis kuantitatif larutan Pb dengan membuat kurva kalibrasi dari kosentrasi 300 ppm sampai kosentrasi terendah yaitu 0,5 ppm, serta diperoleh deteksi limit sebesar 0,44 ppm. Sebagai perbandingan metode deteksi dengan LIBS ini telah dilakukan analisis dengan metode konvensional dengan menentukan selisih massa katoda sebelum dan sesudah elektrolisis dan diperoleh hasil yang sebanding.ABSTRACTThe aim of this research was to compare between a method of laser-induced breakdown spectroscopy (LIBS and the conventional one to analyse of Plumbum (Pb element resulted from electrolysis process. Electrolysis used copper (Cu and carbon (C as cathode and anode respectively. Plumbum element which was deposited on cathode was irradiated by Nd-YAG laser (model CFR 200, 1064nm and its emission intensity of neutral Pb I 405.7 nm in the plasma was captured by HR 2500++ spectrometer and displayed in a form of intensity as a function of wavelength. The experiment result showed that the optimum condition parameters of electrolysis: laser energy, electric current and electrolysis time duration were 100 mJ, 5.28 mA and 15 minutes respectively. An application of these conditions was done to make calibration curve of Pb element in liquid sample from 300 ppm to 0.5 ppm and resulted a limit of

  7. Determination of Metals Present in Textile Dyes Using Laser-Induced Breakdown Spectroscopy and Cross-Validation Using Inductively Coupled Plasma/Atomic Emission Spectroscopy

    Directory of Open Access Journals (Sweden)

    K. Rehan

    2017-01-01

    Full Text Available Laser-induced breakdown spectroscopy (LIBS was used for the quantitative analysis of elements present in textile dyes at ambient pressure via the fundamental mode (1064 nm of a Nd:YAG pulsed laser. Three samples were collected for this purpose. Spectra of textile dyes were acquired using an HR spectrometer (LIBS2000+, Ocean Optics, Inc. having an optical resolution of 0.06 nm in the spectral range of 200 to 720 nm. Toxic metals like Cr, Cu, Fe, Ni, and Zn along with other elements like Al, Mg, Ca, and Na were revealed to exist in the samples. The %-age concentrations of the detected elements were measured by means of standard calibration curve method, intensities of every emission from every species, and calibration-free (CF LIBS approach. Only Sample 3 was found to contain heavy metals like Cr, Cu, and Ni above the prescribed limit. The results using LIBS were found to be in good agreement when compared to outcomes of inductively coupled plasma/atomic emission spectroscopy (ICP/AES.

  8. Heavy metal concentrations in soils as determined by laser-induced breakdown spectroscopy (LIBS), with special emphasis on chromium.

    Science.gov (United States)

    Senesi, G S; Dell'Aglio, M; Gaudiuso, R; De Giacomo, A; Zaccone, C; De Pascale, O; Miano, T M; Capitelli, M

    2009-05-01

    Soil is unanimously considered as one of the most important sink of heavy metals released by human activities. Heavy metal analysis of natural and polluted soils is generally conducted by the use of atomic absorption spectroscopy (AAS) or inductively coupled plasma optical emission spectroscopy (ICP-OES) on adequately obtained soil extracts. Although in recent years the emergent technique of laser-induced breakdown spectroscopy (LIBS) has been applied widely and with increasing success for the qualitative and quantitative analyses of a number of heavy metals in soil matrices with relevant simplification of the conventional methodologies, the technique still requires further confirmation before it can be applied fully successfully in soil analyses. The main objective of this work was to demonstrate that new developments in LIBS technique are able to provide reliable qualitative and quantitative analytical evaluation of several heavy metals in soils, with special focus on the element chromium (Cr), and with reference to the concentrations measured by conventional ICP spectroscopy. The preliminary qualitative LIBS analysis of five soil samples and one sewage sludge sample has allowed the detection of a number of elements including Al, Ca, Cr, Cu, Fe, Mg, Mn, Pb, Si, Ti, V and Zn. Of these, a quantitative analysis was also possible for the elements Cr, Cu, Pb, V and Zn based on the obtained linearity of the calibration curves constructed for each heavy metal, i.e., the proportionality between the intensity of the LIBS emission peaks and the concentration of each heavy metal in the sample measured by ICP. In particular, a triplet of emission lines for Cr could be used for its quantitative measurement. The consistency of experiments made on various samples was supported by the same characteristics of the laser-induced plasma (LIP), i.e., the typical linear distribution confirming the existence of local thermodynamic equilibrium (LTE) condition, and similar excitation

  9. Measuring the thickness of protective coatings on historic metal objects using nanosecond and femtosecond laser induced breakdown spectroscopy depth profiling

    Science.gov (United States)

    Pouli, P.; Melessanaki, K.; Giakoumaki, A.; Argyropoulos, V.; Anglos, D.

    2005-08-01

    Depth profile analysis by means of laser induced breakdown spectroscopy (LIBS) was investigated with respect to its potential to measure the thickness of different types of thin organic films used as protective coatings on historical and archaeological metal objects. For the materials examined, acrylic varnish and microcrystalline wax, the output from a nanosecond ArF excimer laser at 193 nm was found appropriate for performing a reliable profiling of the coating films leading to accurate determination of the coating thickness on the basis of the number of laser pulses required to penetrate the coating and on the ablation etch rate of the corresponding coating material under the same irradiation conditions. Nanosecond pulses at 248 nm proved inadequate to profile the coatings because of their weak absorption at the laser wavelength. In contrast, femtosecond irradiation at 248 nm yielded well-resolved profiles as a result of efficient ablation achieved through the increased non-linear absorption induced by the high power density of the ultrashort pulses.

  10. The use of laser-induced breakdown spectroscopy for the determination of fluorine concentration in glass ionomer cement

    Energy Technology Data Exchange (ETDEWEB)

    Kratochvíl, T., E-mail: kratochviltomm@seznam.cz [University of Pardubice, Institute of Environmental and Chemical Engineering, Studentska 573, 532 10 Pardubice (Czech Republic); Pouzar, M. [University of Pardubice, Institute of Environmental and Chemical Engineering, Studentska 573, 532 10 Pardubice (Czech Republic); Novotný, K. [Department of Chemistry, Faculty of Science, Masaryk University, Kotlářská 2, 611 37 Brno (Czech Republic); Havránek, V. [Nuclear Physics Institute of the ASCR, v.v.i., Řež, 250 68 (Czech Republic); Černohorský, T.; Zvolská, M. [University of Pardubice, Institute of Environmental and Chemical Engineering, Studentska 573, 532 10 Pardubice (Czech Republic)

    2013-10-01

    The influence of He atmosphere and gate width in laser-induced breakdown spectroscopy (LIBS) determination of fluorine concentration was investigated in detail. The measurements were realized on two double pulse LIBS devices featuring different parameters. Calibration curves, describing the relationship between the fluorine concentration and the corresponding intensity of the LIBS signal, were constructed for both LIBS devices, with and without He flow, respectively. Detection limits achieved were in the range 1.18-0.47 wt.%. The best LOD value was obtained in He atmosphere. The LIBS measurement of fluorine content is influenced by different gate widths and the atmosphere in the working chamber. The proposed method was successfully applied to the determination of fluorine concentration in glass ionomer cements. - Highlights: • The influence of atmosphere and gate width in LIBS analysis of F is investigated. • A sensitivity of LIBS measurement is affected by the atmosphere and the gate width. • A collinear arrangement is more suitable for the measurement of sample on the tape. • The LIBS analysis provides an advantage in analysis of total fluorine content. • The proposed method is useful for the quantitative LIBS analysis of F in GIC.

  11. Acidity measurement of iron ore powders using laser-induced breakdown spectroscopy with partial least squares regression.

    Science.gov (United States)

    Hao, Z Q; Li, C M; Shen, M; Yang, X Y; Li, K H; Guo, L B; Li, X Y; Lu, Y F; Zeng, X Y

    2015-03-23

    Laser-induced breakdown spectroscopy (LIBS) with partial least squares regression (PLSR) has been applied to measuring the acidity of iron ore, which can be defined by the concentrations of oxides: CaO, MgO, Al₂O₃, and SiO₂. With the conventional internal standard calibration, it is difficult to establish the calibration curves of CaO, MgO, Al₂O₃, and SiO₂ in iron ore due to the serious matrix effects. PLSR is effective to address this problem due to its excellent performance in compensating the matrix effects. In this work, fifty samples were used to construct the PLSR calibration models for the above-mentioned oxides. These calibration models were validated by the 10-fold cross-validation method with the minimum root-mean-square errors (RMSE). Another ten samples were used as a test set. The acidities were calculated according to the estimated concentrations of CaO, MgO, Al₂O₃, and SiO₂ using the PLSR models. The average relative error (ARE) and RMSE of the acidity achieved 3.65% and 0.0048, respectively, for the test samples.

  12. A pilot study on the vacuum degree online detection of vacuum interrupter using laser-induced breakdown spectroscopy

    Science.gov (United States)

    Wang, X. H.; Yuan, H.; Liu, D. X.; Yang, A. J.; Liu, P.; Gao, L.; Ding, H. B.; Wang, W. T.; Rong, M. Z.

    2016-11-01

    Vacuum degree online detection of vacuum interrupter has been a great challenge for decades. In this letter, a novel approach based on laser induced breakdown spectroscopy (LIBS) was proposed to solve this tough problem, which is suitable for non-intrusive, electro-magnetic interference free and remote detection. The spectral lines of Cu, H, N and O elements from the interrupter shield were detected for a large gas pressure range from p  =  1  ×  10-3 Pa to 1  ×  105 Pa. It was found that the spectral intensities of O and H increase monotonically with gas pressure, in contrast the spectral intensity of Cu first decreases slightly and then increases. Their intensity ratios, especially for that of Cu to O, change dramatically and monotonically with the gas pressure when p  ⩽  0.1 Pa, indicating that they can be used for determining the vacuum degree values. Spectral ratio method fundamentally reduces the influences of the possible variation in measuring distance and the laser power fluctuation, making LIBS a promising method for vacuum degree online detection of vacuum interrupters.

  13. Study of Hydrogen and Oxygen and Its Reaction With Host Elements in Sandstone by Laser-Induced Breakdown Spectroscopy (LIBS)

    Science.gov (United States)

    Suyanto, Hery

    2017-05-01

    A study of hydrogen and oxygen and its reaction with host elements in a sandstone has been done by laser-induced breakdown spectroscopy (LIBS). The sandstone was irradiated by Nd-YAG laser (1064 nm, 7 ns) with varied energy of 60 mJ till 140 mJ in surrounding air gas pressure of 1 atm and produced plasma. The emission intensities of hydrogen H I 656.2 nm and oxygen O I 777.2 nm in the plasma were captured by HR 2500+ spectrometer and displayed in intensity as a function of wavelength. The data show that the emission intensities of hydrogen and oxygen increase with increasing laser energy at a gradient of 5.4 and 11.8 respectively every increasing laser energy of 20 mJ. To characterize the reaction process between hydrogen and oxygen with the host elements of the sandstone, a 0.2 ml demineralized water was dropped on the sandstone surface and was analyzed as a function of delay time reaction and temperature. The data show that the oxidation reaction between host elements and oxygen occurred after 25 minutes that the oxygen emission intensity increases and the hydrogen emission intensity decreases. Another data also show that the increasing temperature of sandstone until 80 C increased intermolecular bond between oxygen and host element and dehydrogenation took place after reaching this temperature

  14. Study of adsorption Ag and Pb in liquid sample using Berea sandstone by commercial laser-induced breakdown spectroscopy (LIBS)

    Science.gov (United States)

    Suyanto, H.; Wendri, N.; Agustiningrum, U.; Manurung, M.

    2016-11-01

    Qualitative and quantitative analysis of Pb and Ag elements in liquid samples had been done by commercial laser-induced breakdown spectroscopy (LIBS) using adsorption method on a Berea Sandstone. The aim of this study is to identify the thickness of the Berea Sandstone for adsorbing Pb and Ag elements in liquid. The experiment was started with characterizing the Berea Sandstone that contains Si, Na, H, Li, K, Ca, O, N, Be, Ti, Al, Mg and Ba. Some of these elements have ability to adsorb Pb and Ag elements in the liquid. To prove this phenomenon, it is required to look for the experiment parameter optimum conditions such as laser energy, adsorption time and sample temperature. The experiment was conducted by dropping 2 ml standard liquid containing 1000 ppm of Pb and Ag to the Berea Sandstone surface. The result showed that the parameter optimum conditions for analyzing Pb and Ag elements in liquid sample with adsorption method were adsorption delay-time of 15 minutes, laser energy of 120 mJ and sample heating of 80 °C. The next experiment was focused on the number of adsorption as a function of depth. The data showed that Pb and Ag elements in liquid sample of 2 ml, 1000 ppm were fully adsorbed by the Berea Sandstone until the depth of 0.372 mm and 10.40 mm from the surface, respectively. The data also showed that the limit of detection predicted to about 22.76 ppm.

  15. Preliminary results of in situ laser-induced breakdown spectroscopy for the first wall diagnostics on EAST

    Science.gov (United States)

    Zhenhua, Hu; Cong, Li; Qingmei, Xiao; Ping, Liu; Fang, Ding; Hongmin, Mao; Jing, Wu; Dongye, Zhao; Hongbin, Ding; Guang-Nan, Luo; EAST Team

    2017-02-01

    Post-mortem methods cannot fulfill the requirement of monitoring the lifetime of the plasma facing components (PFC) and measuring the tritium inventory for the safety evaluation. Laser-induced breakdown spectroscopy (LIBS) is proposed as a promising method for the in situ study of fuel retention and impurity deposition in a tokamak. In this study, an in situ LIBS system was successfully established on EAST to investigate fuel retention and impurity deposition on the first wall without the need of removal tiles between plasma discharges. Spectral lines of D, H and impurities (Mo, Li, Si, … ) in laser-induced plasma were observed and identified within the wavelength range of 500-700 nm. Qualitative measurements such as thickness of the deposition layers, element depth profile and fuel retention on the wall are obtained by means of in situ LIBS. The results demonstrated the potential applications of LIBS for in situ characterization of fuel retention and co-deposition on the first wall of EAST. Supported by the National Magnetic Confinement Fusion Science Program of China (Nos. 2013GB105002, 2015GB109001, and 2013GB109005), National Natural Science Foundation of China (Nos. 11575243, 11605238, 11605023), Chinesisch-Deutsches Forschungs Project (GZ765), and Korea Research Council of Fundamental Science and Technology (KRCF) under the international collaboration & research in Asian countries (PG1314).

  16. Selective ablation of Copper-Indium-Diselenide solar cells monitored by laser-induced breakdown spectroscopy and classification methods

    Energy Technology Data Exchange (ETDEWEB)

    Diego-Vallejo, David [Technische Universität Berlin, Institute of Optics and Atomic Physics, Straße des 17, Juni 135, 10623 Berlin (Germany); Laser- und Medizin- Technologie Berlin GmbH (LMTB), Applied Laser Technology, Fabeckstr. 60-62, 14195 Berlin (Germany); Ashkenasi, David, E-mail: d.ashkenasi@lmtb.de [Laser- und Medizin- Technologie Berlin GmbH (LMTB), Applied Laser Technology, Fabeckstr. 60-62, 14195 Berlin (Germany); Lemke, Andreas [Laser- und Medizin- Technologie Berlin GmbH (LMTB), Applied Laser Technology, Fabeckstr. 60-62, 14195 Berlin (Germany); Eichler, Hans Joachim [Technische Universität Berlin, Institute of Optics and Atomic Physics, Straße des 17, Juni 135, 10623 Berlin (Germany); Laser- und Medizin- Technologie Berlin GmbH (LMTB), Applied Laser Technology, Fabeckstr. 60-62, 14195 Berlin (Germany)

    2013-09-01

    Laser-induced breakdown spectroscopy (LIBS) and two classification methods, i.e. linear correlation and artificial neural networks (ANN), are used to monitor P1, P2 and P3 scribing steps of Copper-Indium-Diselenide (CIS) solar cells. Narrow channels featuring complete removal of desired layers with minimum damage on the underlying film are expected to enhance efficiency of solar cells. The monitoring technique is intended to determine that enough material has been removed to reach the desired layer based on the analysis of plasma emission acquired during multiple pass laser scribing. When successful selective scribing is achieved, a high degree of similarity between test and reference spectra has to be identified by classification methods in order to stop the scribing procedure and avoid damaging the bottom layer. Performance of linear correlation and artificial neural networks is compared and evaluated for two spectral bandwidths. By using experimentally determined combinations of classifier and analyzed spectral band for each step, classification performance achieves errors of 7, 1 and 4% for steps P1, P2 and P3, respectively. The feasibility of using plasma emission for the supervision of processing steps of solar cell manufacturing is demonstrated. This method has the potential to be implemented as an online monitoring procedure assisting the production of solar cells. - Highlights: • LIBS and two classification methods were used to monitor CIS solar cells processing. • Selective ablation of thin-film solar cells was improved with inspection system. • Customized classification method and analyzed spectral band enhanced performance.

  17. Classification of wrought aluminum alloys by Artificial Neural Networks evaluation of Laser Induced Breakdown Spectroscopy spectra from aluminum scrap samples

    Science.gov (United States)

    Campanella, B.; Grifoni, E.; Legnaioli, S.; Lorenzetti, G.; Pagnotta, S.; Sorrentino, F.; Palleschi, V.

    2017-08-01

    Every year throughout the world > 50 million vehicles reach the end of their life, producing millions of tons of automotive waste. The current strategies for the separation of the non-ferrous waste fraction, contain mainly aluminum, magnesium, zinc and copper alloys, involve high investment and operational costs, and pose environmental concerns. The European project SHREDDERSORT, in which our research group was actively involved, aimed to overcome this issue by developing a new dry sorting technology for the shredding of non-ferrous automotive wastes. This work represents one step of the complex SHREDDERSORT project, dedicated to the development of a strategy based on Laser Induced Breakdown Spectroscopy (LIBS) for the sorting of light alloys. LIBS was here applied in laboratory for the analysis of stationary aluminum shredder samples. To process the LIBS spectra a methodological approach based on artificial neural networks was used. Although separation could in principle be based on simple emission line ratios, the neural networks approach enables more reproducible results, which can accommodate the unavoidable signal variations due to the low intrinsic reproducibility of the LIBS systems. The neural network separated samples into different clusters and estimates their elemental concentrations.

  18. Classification of wines according to their production regions with the contained trace elements using laser-induced breakdown spectroscopy

    Science.gov (United States)

    Tian, Ye; Yan, Chunhua; Zhang, Tianlong; Tang, Hongsheng; Li, Hua; Yu, Jialu; Bernard, Jérôme; Chen, Li; Martin, Serge; Delepine-Gilon, Nicole; Bocková, Jana; Veis, Pavel; Chen, Yanping; Yu, Jin

    2017-09-01

    Laser-induced breakdown spectroscopy (LIBS) has been applied to classify French wines according to their production regions. The use of the surface-assisted (or surface-enhanced) sample preparation method enabled a sub-ppm limit of detection (LOD), which led to the detection and identification of at least 22 metal and nonmetal elements in a typical wine sample including majors, minors and traces. An ensemble of 29 bottles of French wines, either red or white wines, from five production regions, Alsace, Bourgogne, Beaujolais, Bordeaux and Languedoc, was analyzed together with a wine from California, considered as an outlier. A non-supervised classification model based on principal component analysis (PCA) was first developed for the classification. The results showed a limited separation power of the model, which however allowed, in a step by step approach, to understand the physical reasons behind each step of sample separation and especially to observe the influence of the matrix effect in the sample classification. A supervised classification model was then developed based on random forest (RF), which is in addition a nonlinear algorithm. The obtained classification results were satisfactory with, when the parameters of the model were optimized, a classification accuracy of 100% for the tested samples. We especially discuss in the paper, the effect of spectrum normalization with an internal reference, the choice of input variables for the classification models and the optimization of parameters for the developed classification models.

  19. Analysis of powdered tungsten carbide hard-metal precursors and cemented compact tungsten carbides using laser-induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Novotny, K. [Laboratory of Atomic Spectrochemistry, Department of Chemistry, Faculty of Science, Masaryk University, Kotlarska 2, 611 37 Brno (Czech Republic)], E-mail: codl@sci.muni.cz; Stankova, A. [Laboratory of Atomic Spectrochemistry, Department of Chemistry, Faculty of Science, Masaryk University, Kotlarska 2, 611 37 Brno (Czech Republic); Haekkaenen, H.; Korppi-Tommola, J. [Department of Chemistry, University of Jyvaeskylae, P.O. BOX 35, FIN-40014 (Finland); Otruba, V.; Kanicky, V. [Laboratory of Atomic Spectrochemistry, Department of Chemistry, Faculty of Science, Masaryk University, Kotlarska 2, 611 37 Brno (Czech Republic)

    2007-12-15

    Laser-induced breakdown spectroscopy (LIBS) has been applied to the direct analysis of powdered tungsten carbide hard-metal precursors and cemented tungsten carbides. The aim of this work was to examine the possibility of quantitative determination of the niobium, titanium, tantalum and cobalt. The investigated samples were in the form of pellets, pressed with and without binder (powdered silver) and in the form of cemented tungsten carbides. The pellets were prepared by pressing the powdered material in a hydraulic press. Cemented tungsten carbides were embedded in resin for easier manipulation. Several lasers and detection systems were utilized. The Nd:YAG laser working at a basic wavelength of 1064 nm and fourth-harmonic frequency of 266 nm with a gated photomultiplier or ICCD detector HORIBA JY was used for the determination of niobium which was chosen as a model element. Different types of surrounding gases (air, He, Ar) were investigated for analysis. The ICCD detector DICAM PRO with Mechelle 7500 spectrometer with ArF laser (193 nm) and KrF laser (248 nm) were employed for the determination of niobium, titanium, tantalum and cobalt in samples under air atmosphere. Good calibration curves were obtained for Nb, Ti, and Ta (coefficients of determination r{sup 2} > 0.96). Acceptable calibration curves were acquired for the determination of cobalt (coefficient of determination r{sup 2} = 0.7994) but only for the cemented samples. In the case of powdered carbide precursors, the calibration for cobalt was found to be problematic.

  20. Analysis of powdered tungsten carbide hard-metal precursors and cemented compact tungsten carbides using laser-induced breakdown spectroscopy

    Science.gov (United States)

    Novotný, K.; Staňková, A.; Häkkänen, H.; Korppi-Tommola, J.; Otruba, V.; Kanický, V.

    2007-12-01

    Laser-induced breakdown spectroscopy (LIBS) has been applied to the direct analysis of powdered tungsten carbide hard-metal precursors and cemented tungsten carbides. The aim of this work was to examine the possibility of quantitative determination of the niobium, titanium, tantalum and cobalt. The investigated samples were in the form of pellets, pressed with and without binder (powdered silver) and in the form of cemented tungsten carbides. The pellets were prepared by pressing the powdered material in a hydraulic press. Cemented tungsten carbides were embedded in resin for easier manipulation. Several lasers and detection systems were utilized. The Nd:YAG laser working at a basic wavelength of 1064 nm and fourth-harmonic frequency of 266 nm with a gated photomultiplier or ICCD detector HORIBA JY was used for the determination of niobium which was chosen as a model element. Different types of surrounding gases (air, He, Ar) were investigated for analysis. The ICCD detector DICAM PRO with Mechelle 7500 spectrometer with ArF laser (193 nm) and KrF laser (248 nm) were employed for the determination of niobium, titanium, tantalum and cobalt in samples under air atmosphere. Good calibration curves were obtained for Nb, Ti, and Ta (coefficients of determination r2 > 0.96). Acceptable calibration curves were acquired for the determination of cobalt (coefficient of determination r2 = 0.7994) but only for the cemented samples. In the case of powdered carbide precursors, the calibration for cobalt was found to be problematic.

  1. Application of picosecond laser-induced breakdown spectroscopy to quantitative analysis of boron in meatballs and other biological samples.

    Science.gov (United States)

    Hedwig, Rinda; Lahna, Kurnia; Lie, Zener Sukra; Pardede, Marincan; Kurniawan, Koo Hendrik; Tjia, May On; Kagawa, Kiichiro

    2016-11-10

    This report presents the results of laser-induced breakdown spectroscopy (LIBS) study on biological and food samples of high water content using a picosecond (ps) laser at low output energy of 10 mJ and low-pressure helium ambient gas at 2 kPa. Evidence of excellent emission spectra of various analyte elements with very low background is demonstrated for a variety of samples without the need of sample pretreatment. Specifically, limits of detection in the range of sub-ppm are obtained for hazardous Pb and B impurities in carrots and meatballs. This study also shows the inferior performance of LIBS using a nanosecond laser and atmospheric ambient air for a soft sample of high water content and thereby explains its less successful applications in previous attempts. The present result has instead demonstrated the feasibility and favorable results of employing LIBS with a ps laser and low-pressure helium ambient gas as a less costly and more practical alternative to inductively coupled plasma for regular high sensitive inspection of harmful food preservatives and environmental pollutants.

  2. Preliminary results of in situ laser-induced breakdown spectroscopy for the first wall diagnostics on EAST

    Science.gov (United States)

    Hu, Zhenhua; Li, Cong; Xiao, Qingmei; Liu, Ping; Fang, Ding; Mao, Hongmin; Wu, Jing; Zhao, Dongye; Ding, Hongbin; Luo, Guang-Nan; EAST Team

    2017-02-01

    Post-mortem methods cannot fulfill the requirement of monitoring the lifetime of the plasma facing components (PFC) and measuring the tritium inventory for the safety evaluation. Laser-induced breakdown spectroscopy (LIBS) is proposed as a promising method for the in situ study of fuel retention and impurity deposition in a tokamak. In this study, an in situ LIBS system was successfully established on EAST to investigate fuel retention and impurity deposition on the first wall without the need of removal tiles between plasma discharges. Spectral lines of D, H and impurities (Mo, Li, Si, … ) in laser-induced plasma were observed and identified within the wavelength range of 500-700 nm. Qualitative measurements such as thickness of the deposition layers, element depth profile and fuel retention on the wall are obtained by means of in situ LIBS. The results demonstrated the potential applications of LIBS for in situ characterization of fuel retention and co-deposition on the first wall of EAST. Supported by the National Magnetic Confinement Fusion Science Program of China (Nos. 2013GB105002, 2015GB109001, and 2013GB109005), National Natural Science Foundation of China (Nos. 11575243, 11605238, 11605023), Chinesisch-Deutsches Forschungs Project (GZ765), and Korea Research Council of Fundamental Science and Technology (KRCF) under the international collaboration & research in Asian countries (PG1314).

  3. Correction of self-absorption effect in calibration-free laser-induced breakdown spectroscopy by an internal reference method.

    Science.gov (United States)

    Sun, Lanxiang; Yu, Haibin

    2009-07-15

    A simplified procedure for correcting self-absorption effect was proposed in calibration-free laser-induced breakdown spectroscopy (CF-LIBS). In typical LIBS measurement conditions, the plasma produced is often optically thick, especially for the strong lines of major elements. The selection of self-absorption lines destroys the performance of CF-LIBS, and the familiar correction method based on the curve of growth is complex in implementation. The procedure we proposed, named internal reference for self-absorption correction (IRSAC), first chose an internal reference line for each species, then compared other spectral line intensity of the same species with the reference line to estimate the self-absorption degrees of other spectral lines, and finally achieved an optimal correction by a regressive algorithm. The self-absorption effect of the selected reference line can be ignored, since the reference line with high excitation energy of the upper level is slightly affected by the self-absorption. Through the IRSAC method, the points on the Boltzmann plot become more regular, and the evaluations of the plasma temperature and material composition are more accurate than the basic CF-LIBS.

  4. Spatial distribution analysis of strontium in human teeth by laser-induced breakdown spectroscopy: application to diagnosis of seawater drowning.

    Science.gov (United States)

    Fortes, Francisco J; Perez-Carceles, Maria D; Sibon, Agustin; Luna, Aurelio; Laserna, J Javier

    2015-07-01

    The diagnosis of drowning can be extremely difficult, especially when the typical morphological signs of drowning are not present, or when the body is in an advanced stage of putrefaction. The main aim of this work is to demonstrate the applicability of laser-induced breakdown spectroscopy (LIBS) to the diagnosis of seawater drowning. Ten teeth samples were selected from eight medico-legal autopsies. A Nd:YAG laser operating at its fundamental wavelength (1,064 nm) was used to generate microplasmas at the sample surface. Strontium (Sr) concentration in tooth samples has been found to be a key factor for the diagnosis of seawater drowning. Spectral differences between the dentin and the enamel were observed. Greater Sr abundance was located in the dentin, with relative standard deviations in the range of 30 to 35%. In addition, chemical images were generated to study the spatial distribution of Sr along the piece. In all cases, Sr content was higher when the cause of the individual death was drowning. A blind experiment was performed to exclude the possibility that the increase of Sr is due to passive diffusion in the blood. The detection of Sr as well as the determination of its distribution by LIBS in dentin seems to be a promising complementary tool for the diagnosis of death by seawater drowning.

  5. Adaptive approach for variable noise suppression on laser-induced breakdown spectroscopy responses using stationary wavelet transform.

    Science.gov (United States)

    Schlenke, Jan; Hildebrand, Lars; Moros, Javier; Laserna, J Javier

    2012-11-19

    Spectral signals are often corrupted by noise during their acquisition and transmission. Signal processing refers to a variety of operations that can be carried out on measurements in order to enhance the quality of information. In this sense, signal denoising is used to reduce noise distortions while keeping alterations of the important signal features to a minimum. The minimization of noise is a highly critical task since, in many cases, there is no prior knowledge of the signal or of the noise. In the context of denoising, wavelet transformation has become a valuable tool. The present paper proposes a noise reduction technique for suppressing noise in laser-induced breakdown spectroscopy (LIBS) signals using wavelet transform. An extension of the Donoho's scheme, which uses a redundant form of wavelet transformation and an adaptive threshold estimation method, is suggested. Capabilities and results achieved on denoising processes of artificial signals and actual spectroscopic data, both corrupted by noise with changing intensities, are presented. In order to better consolidate the gains so far achieved by the proposed strategy, a comparison with alternative approaches, as well as with traditional techniques, is also made. Copyright © 2012 Elsevier B.V. All rights reserved.

  6. Direct spectral analysis and determination of high content of carcinogenic bromine in bread using UV pulsed laser induced breakdown spectroscopy.

    Science.gov (United States)

    Mehder, A O; Gondal, Mohammed A; Dastageer, Mohamed A; Habibullah, Yusuf B; Iqbal, Mohammed A; Oloore, Luqman E; Gondal, Bilal

    2016-01-01

    Laser induced breakdown spectroscopy (LIBS) was applied for the detection of carcinogenic elements like bromine in four representative brands of loaf bread samples and the measured bromine concentrations were 352, 157, 451, and 311 ppm, using Br I (827.2 nm) atomic transition line as the finger print atomic transition. Our LIBS system is equipped with a pulsed laser of wavelength 266 nm with energy 25 mJ pulse(-1), 8 ns pulse duration, 20 Hz repetition rate, and a gated ICCD camera. The LIBS system was calibrated with the standards of known concentrations in the sample (bread) matrix and such plot is linear in 20-500 ppm range. The capability of our system in terms of limit of detection and relative accuracy with respect to the standard inductively coupled plasma mass spectrometry (ICPMS) technique was evaluated and these values were 5.09 ppm and 0.01-0.05, respectively, which ensures the applicability of our system for Br trace level detection, and LIBS results are in excellent agreement with that of ICPMS results.

  7. A Comparison of Multivariate and Pre-Processing Methods for Quantitative Laser-Induced Breakdown Spectroscopy of Geologic Samples

    Science.gov (United States)

    Anderson, R. B.; Morris, R. V.; Clegg, S. M.; Bell, J. F., III; Humphries, S. D.; Wiens, R. C.

    2011-01-01

    The ChemCam instrument selected for the Curiosity rover is capable of remote laser-induced breakdown spectroscopy (LIBS).[1] We used a remote LIBS instrument similar to ChemCam to analyze 197 geologic slab samples and 32 pressed-powder geostandards. The slab samples are well-characterized and have been used to validate the calibration of previous instruments on Mars missions, including CRISM [2], OMEGA [3], the MER Pancam [4], Mini-TES [5], and Moessbauer [6] instruments and the Phoenix SSI [7]. The resulting dataset was used to compare multivariate methods for quantitative LIBS and to determine the effect of grain size on calculations. Three multivariate methods - partial least squares (PLS), multilayer perceptron artificial neural networks (MLP ANNs) and cascade correlation (CC) ANNs - were used to generate models and extract the quantitative composition of unknown samples. PLS can be used to predict one element (PLS1) or multiple elements (PLS2) at a time, as can the neural network methods. Although MLP and CC ANNs were successful in some cases, PLS generally produced the most accurate and precise results.

  8. Optimally enhanced optical emission in laser-induced breakdown spectroscopy by combining spatial confinement and dual-pulse irradiation.

    Science.gov (United States)

    Guo, L B; Zhang, B Y; He, X N; Li, C M; Zhou, Y S; Wu, T; Park, J B; Zeng, X Y; Lu, Y F

    2012-01-16

    In laser-induced breakdown spectroscopy (LIBS), a pair of aluminum-plate walls were used to spatially confine the plasmas produced in air by a first laser pulse (KrF excimer laser) from chromium (Cr) targets with a second laser pulse (Nd:YAG laser at 532 nm, 360 mJ/pulse) introduced parallel to the sample surface to re-excite the plasmas. Optical emission enhancement was achieved by combing the spatial confinement and dual-pulse LIBS (DP-LIBS), and then optimized by adjusting the distance between the two walls and the interpulse delay time between both laser pulses. A significant enhancement factor of 168.6 for the emission intensity of the Cr lines was obtained at an excimer laser fluence of 5.6 J/cm(2) using the combined spatial confinement and DP-LIBS, as compared with an enhancement factor of 106.1 was obtained with DP-LIBS only. The enhancement mechanisms based on shock wave theory and reheating in DP-LIBS are discussed.

  9. Improving the application of laser-induced breakdown spectroscopy for the determination of total carbon in soils.

    Science.gov (United States)

    Nguyen, Hang Vo-Minh; Moon, Seung-Jae; Choi, Jung Hyun

    2015-02-01

    The increase of atmospheric greenhouse gases such as CO2 has caused noticeable climate change. Since increased CO2 may contribute to carbon storage in terrestrial ecosystems through the CO2 cycle between the atmosphere and vegetation, it is necessary to improve methods for measuring C in soil. In this study, we determined the total carbon concentrations of soils using a highly sensitive and rapid method, laser-induced breakdown spectroscopy. The presence of C has been measured by detecting signal at the wavelength of 247.86 nm. The obstacle of Fe interference at the C measurement wavelength of 247.86 nm was reduced by selecting the optimal delay time of 1.4 μs. The ratio of peak intensities (areas) at 247.86 nm for C and 248.20 nm for Fe was then successfully applied to the calibration curve. In addition, to dismiss the problem of measuring the C lines at 247.86 nm, 193.03 nm has been used to observe C emission. Both the 193.03- and 247.86-nm lines provided significant linear calibrations. The 193.03-nm lines presented stronger relative accuracies in predicting the lower C concentrations of the unknown samples than that one at 247.86 nm.

  10. Evaluation of Laser-Induced Breakdown Spectroscopy (LIBS) for Measurement of Silica on Filter Samples of Coal Dust

    Science.gov (United States)

    Stipe, Christopher B.; Miller, Arthur L.; Brown, Jonathan; Guevara, Edward; Cauda, Emanuele

    2015-01-01

    Airborne silica dust (quartz) is common in coal mines and represents a respiratory hazard that can lead to silicosis, a potentially fatal lung disease. With an eye toward developing a portable monitoring device for rapid analysis of silica dust, laser-induced breakdown spectroscopy (LIBS) was used to quantify quartz in coal dust samples collected on filter media. Pure silica (Min-U-Sil™ 5), Georgia kaolin, and Pittsburgh-4 and Illinois-6 coal dusts were deposited separately and at multiple mass loadings onto 37-mm polyvinylchloride (PVC) filters. LIBS-generated silicon emission was monitored at 288.16 nm, and non-silica contributions to that signal from kaolinite were removed by simultaneously detecting aluminum. Measurements of the four samples were used to calculate limits of detection (LOD) for silicon and aluminum of approximately 0.08 µg/cm2 and 0.05 µg/cm2, respectively (corresponding to 0.16 µg/cm2 and 0.20 µg/cm2 for silica and kaolinite, respectively). Relative errors of prediction are around 10%. Results demonstrate that LIBS can dependably quantify silica on filter samples of coal dust and confirm that accurate quantification can be achieved for very lightly loaded samples, which supports the potential application of LIBS for rapid, in-field monitoring. PMID:23146184

  11. The differentiation of oral soft- and hard tissues using laser induced breakdown spectroscopy - a prospect for tissue specific laser surgery.

    Science.gov (United States)

    Rohde, Maximilian; Mehari, Fanuel; Klämpfl, Florian; Adler, Werner; Neukam, Friedrich-Wilhelm; Schmidt, Michael; Stelzle, Florian

    2016-11-22

    Compared to conventional techniques, Laser surgery procedures provide a number of advantages, but may be associated with an increased risk of iatrogenic damage to important anatomical structures. The type of tissue ablated in the focus spot is unknown. Laser-Induced Breakdown-Spectroscopy (LIBS) has the potential to gain information about the type of material that is being ablated by the laser beam. This may form the basis for tissue selective laser surgery. In the present study, 7 different porcine tissues (cortical and cancellous bone, nerve, mucosa, enamel, dentine and pulp) from 6 animals were analyzed for their qualitative and semiquantitative molecular composition using LIBS. The so gathered data was used to first differentiate between the soft- and hard-tissues using a Calcium-Carbon emission based classifier. The tissues were then further classified using emission-ratio based analysis, principal component analysis (PCA) and linear discriminant analysis (LDA). The relatively higher concentration of Calcium in the hard tissues allows for an accurate first differentiation of soft- and hard tissues (100% sensitivity and specificity). The ratio based statistical differentiation approach yields results in the range from 65% (enamel-dentine pair) to 100% (nerve-pulp, cancellous bone-dentine, cancellous bone-enamel pairs) sensitivity and specificity. Experimental LIBS measuring setup. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. Laser-induced breakdown spectroscopy-based investigation and classification of pharmaceutical tablets using multivariate chemometric analysis.

    Science.gov (United States)

    Myakalwar, Ashwin Kumar; Sreedhar, S; Barman, Ishan; Dingari, Narahara Chari; Venugopal Rao, S; Prem Kiran, P; Tewari, Surya P; Manoj Kumar, G

    2011-12-15

    We report the effectiveness of laser-induced breakdown spectroscopy (LIBS) in probing the content of pharmaceutical tablets and also investigate its feasibility for routine classification. This method is particularly beneficial in applications where its exquisite chemical specificity and suitability for remote and on site characterization significantly improves the speed and accuracy of quality control and assurance process. Our experiments reveal that in addition to the presence of carbon, hydrogen, nitrogen and oxygen, which can be primarily attributed to the active pharmaceutical ingredients, specific inorganic atoms were also present in all the tablets. Initial attempts at classification by a ratiometric approach using oxygen (∼777 nm) to nitrogen (742.36 nm, 744.23 nm and 746.83 nm) compositional values yielded an optimal value at 746.83 nm with the least relative standard deviation but nevertheless failed to provide an acceptable classification. To overcome this bottleneck in the detection process, two chemometric algorithms, i.e. principal component analysis (PCA) and soft independent modeling of class analogy (SIMCA), were implemented to exploit the multivariate nature of the LIBS data demonstrating that LIBS has the potential to differentiate and discriminate among pharmaceutical tablets. We report excellent prospective classification accuracy using supervised classification via the SIMCA algorithm, demonstrating its potential for future applications in process analytical technology, especially for fast on-line process control monitoring applications in the pharmaceutical industry. Copyright © 2011 Elsevier B.V. All rights reserved.

  13. Detection of pesticides and dioxins in tissue fats and rendering oils using laser-induced breakdown spectroscopy (LIBS).

    Science.gov (United States)

    Multari, Rosalie A; Cremers, David A; Scott, Thomas; Kendrick, Peter

    2013-03-13

    In laser-induced breakdown spectroscopy (LIBS), a series of powerful laser pulses are directed at a surface to form microplasmas from which light is collected and spectrally analyzed to identify the surface material. In most cases, no sample preparation is needed, and results can be automated and made available within seconds to minutes. Advances in LIBS spectral data analysis using multivariate regression techniques have led to the ability to detect organic chemicals in complex matrices such as foods. Here, the use of LIBS to differentiate samples contaminated with aldrin, 1,2,3,4,6,7,8-heptachlorodibenzo-p-dioxin, chlorpyrifos, and dieldrin in the complex matrices of tissue fats and rendering oils is described. The pesticide concentrations in the samples ranged from 0.005 to 0.1 μg/g. All samples were successfully differentiated from each other and from control samples. Sample concentrations could also be differentiated for all of the pesticides and the dioxin included in this study. The results presented here provide first proof-of-principle data for the ability to create LIBS-based instrumentation for the rapid analysis of pesticide and dioxin contamination in tissue fat and rendered oils.

  14. Advanced signal processing analysis of laser-induced breakdown spectroscopy data for the discrimination of obsidian sources.

    Science.gov (United States)

    Remus, Jeremiah J; Harmon, Russell S; Hark, Richard R; Haverstock, Gregory; Baron, Dirk; Potter, Ian K; Bristol, Samantha K; East, Lucille J

    2012-03-01

    Obsidian is a natural glass of volcanic origin and a primary resource used by indigenous peoples across North America for making tools. Geochemical studies of obsidian enhance understanding of artifact production and procurement and remain a priority activity within the archaeological community. Laser-induced breakdown spectroscopy (LIBS) is an analytical technique being examined as a means for identifying obsidian from different sources on the basis of its 'geochemical fingerprint'. This study tested whether two major California obsidian centers could be distinguished from other obsidian localities and the extent to which subsources could be recognized within each of these centers. LIBS data sets were collected in two different spectral bands (350±130 nm and 690±115 nm) using a Nd:YAG 1064 nm laser operated at ~23 mJ, a Czerny-Turner spectrograph with 0.2-0.3 nm spectral resolution and a high performance imaging charge couple device (ICCD) detector. Classification of the samples was performed using partial least-squares discriminant analysis (PLSDA), a common chemometric technique for performing statistical regression on high-dimensional data. Discrimination of samples from the Coso Volcanic Field, Bodie Hills, and other major obsidian areas in north-central California was possible with an accuracy of greater than 90% using either spectral band. © 2012 Optical Society of America

  15. Approach for determination of detonation performance and aluminum percentage of aluminized-based explosives by laser-induced breakdown spectroscopy.

    Science.gov (United States)

    Rezaei, Amir Hossein; Keshavarz, Mohammad Hossein; Tehrani, Masoud Kavosh; Reza Darbani, Seyyed Mohammad; Farhadian, Amir Hossein; Mousavi, Seyyed Jabbar; Mousaviazar, Ali

    2016-04-20

    Energetic materials containing aluminum powder are hazardous compounds, which have wide applications as propellants, explosives, and pyrotechnics. This work introduces a new method on the basis of the laser-induced breakdown spectroscopy technique in air and argon atmospheres to investigate determination of aluminum content and detonation performance of 1,3,5-trinitro-1,3,5-triazine (RDX)-based aluminized explosives. Plasma emission of aluminized RDX explosives are recorded where atomic lines of Al, C, H, N, and O, as well as molecular bands of AlO and CN are identified. The formation mechanism of AlO and CN molecular bands is affected by the aluminum percentage and oxygen content present in the composition and plasma. Relative intensity of the Al/O is used to determine detonation velocity and pressure of the RDX/Al samples. The released energy in the laser-induced plasma of aluminized RDX composition is related to the heat of explosion and percentage of aluminum.

  16. Identification and discrimination of Pseudomonas aeruginosa bacteria grown in blood and bile by laser-induced breakdown spectroscopy

    Science.gov (United States)

    Rehse, Steven J.; Diedrich, Jonathan; Palchaudhuri, Sunil

    2007-10-01

    Pseudomonas aeruginosa bacteria colonies have been analyzed by laser-induced breakdown spectroscopy using nanosecond laser pulses. LIBS spectra were obtained after transferring the bacteria from a nutrient-rich culture medium to a nutrient-free agar plate for laser ablation. To study the dependence of the LIBS spectrum on growth and environmental conditions, colonies were cultured on three different nutrient media: a trypticase soy agar (TSA) plate, a blood agar plate, and a medium chosen deliberately to induce bacteria membrane changes, a MacConkey agar plate containing bile salts. Nineteen atomic and ionic emission lines in the LIBS spectrum, which was dominated by inorganic elements such as calcium, magnesium and sodium, were used to identify and classify the bacteria. A discriminant function analysis was used to discriminate between the P. aeruginosa bacteria and two strains of E. coli: a non-pathogenic environmental strain and the pathogenic strain enterohemorrhagic E. coli 0157:H7 (EHEC). Nearly identical spectra were obtained from P. aeruginosa grown on the TSA plate and the blood agar plate, while the bacteria grown on the MacConkey plate exhibited easily distinguishable differences from the other two. All P. aeruginosa samples, independent of initial growth conditions, were readily discriminated from the two E. coli strains.

  17. Partial Least Squares and Neural Networks for Quantitative Calibration of Laser-induced Breakdown Spectroscopy (LIBs) of Geologic Samples

    Science.gov (United States)

    Anderson, R. B.; Morris, Richard V.; Clegg, S. M.; Humphries, S. D.; Wiens, R. C.; Bell, J. F., III; Mertzman, S. A.

    2010-01-01

    The ChemCam instrument [1] on the Mars Science Laboratory (MSL) rover will be used to obtain the chemical composition of surface targets within 7 m of the rover using Laser Induced Breakdown Spectroscopy (LIBS). ChemCam analyzes atomic emission spectra (240-800 nm) from a plasma created by a pulsed Nd:KGW 1067 nm laser. The LIBS spectra can be used in a semiquantitative way to rapidly classify targets (e.g., basalt, andesite, carbonate, sulfate, etc.) and in a quantitative way to estimate their major and minor element chemical compositions. Quantitative chemical analysis from LIBS spectra is complicated by a number of factors, including chemical matrix effects [2]. Recent work has shown promising results using multivariate techniques such as partial least squares (PLS) regression and artificial neural networks (ANN) to predict elemental abundances in samples [e.g. 2-6]. To develop, refine, and evaluate analysis schemes for LIBS spectra of geologic materials, we collected spectra of a diverse set of well-characterized natural geologic samples and are comparing the predictive abilities of PLS, cascade correlation ANN (CC-ANN) and multilayer perceptron ANN (MLP-ANN) analysis procedures.

  18. ,* Copper transport and accumulation in spruce stems (picea abies(L.) Karsten) revelaed by laser-induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Krajcarova, Dr. Lucie [Czech Technical University; Novotny, Dr. Karel [Mendel University of Brno; Babula, Dr. Petr [Czech Technical University; Pravaznik, Dr Ivo [Czech Technical University; Kucerova, Dr. Petra [Czech Technical University; Vojtech, Dr. Adam [Czech Technical University; Martin, Madhavi Z [ORNL; Kizek, Dr. Rene [Czech Technical University; Kaiser, Jozef [ORNL

    2013-01-01

    Laser-Induced Breakdown Spectroscopy (LIBS) in double pulse configuration (DP LIBS) was used for scanning elemental spatial distribution in annual terminal stems of spruce (Picea abies (L.) Karsten). Cross sections of stems cultivated in Cu2+ solution of different concentrations were prepared and analyzed by DP LIBS. Raster scanning with 150 m spatial resolution was set and 2D (2-dimentional) maps of Cu and Ca distribution were created on the basis of the data obtained. Stem parts originating in the vicinity of the implementation of the cross sections were mineralized and subsequently Cu and Ca contents were analyzed by inductively coupled plasma mass spectrometry (ICP-MS). The results provide quantitative information about overall concentration of the elements in places, where LIBS measurements were performed. The fluorescence pictures were created to compare LIBS distribution maps and the fluorescence intensity (or the increase in autofluorescence) was used for the comparison of ICP-MS quantitative results. Results from these three methods can be utilized for quantitative measurements of copper ions transport in different plant compartments in dependence on the concentration of cultivation medium and/or the time of cultivation.

  19. Detector comparison for sulfur and chlorine detection with laser induced breakdown spectroscopy in the near-infrared-region

    Science.gov (United States)

    Weritz, F.; Schaurich, D.; Wilsch, G.

    2007-12-01

    Laser-induced breakdown spectroscopy has been employed for the investigation of the sulfur and chlorine content of building materials. Both, chloride and sulfate ions are major damaging species affecting the stability and lifetime of a structure. Chlorine and sulfur are mostly detected in the VUV and the NIR. In case of building materials the main elements like calcium or iron have many strong spectral lines over the whole spectral range, so that trace elements can only be detected in spectral windows unaffected from these lines. With regard to a preferably simply, robust against dust and vibrations and portable setup only the NIR spectral features are used for civil engineering applications. Most detectors, mainly CCD cameras have rapidly decreasing quantum efficiency in the NIR. Also the quantum efficiency of the photocathode of CCD-Detectors with image intensifier is decreasing in the NIR. Different CCD-detectors were tested with respect to high quantum efficiency and high dynamic range, which is necessary for simultaneous detection of weak spectral lines from trace elements and intense spectral lines from main elements. The measurements are made on reference samples consisting of cement, hydrated cement, cement mortar and concrete with well-defined amounts of the trace elements. Experimental conditions are chosen for an optimum intensity of the trace element spectral lines. The detector systems are compared by limit of detections and the signal to noise ratio.

  20. In situ Laser Induced Breakdown Spectroscopy as a tool to discriminate volcanic rocks and magmatic series, Iceland

    Energy Technology Data Exchange (ETDEWEB)

    Roux, C.P.M., E-mail: clement.roux@u-bourgogne.fr [Laboratoire interdisciplinaire Carnot de Bourgogne, UMR 6303 CNRS-Université de Bourgogne, BP 47 870, F-21078 Dijon Cedex (France); Rakovský, J.; Musset, O. [Laboratoire interdisciplinaire Carnot de Bourgogne, UMR 6303 CNRS-Université de Bourgogne, BP 47 870, F-21078 Dijon Cedex (France); Monna, F. [Laboratoire ARTéHIS, UMR 6298 CNRS-Université de Bourgogne, 6 Boulevard Gabriel, F-21000 Dijon (France); Buoncristiani, J.-F.; Pellenard, P.; Thomazo, C. [Laboratoire Biogéosciences, UMR 6282 CNRS-Université de Bourgogne, 6 Boulevard Gabriel, F-21000 Dijon (France)

    2015-01-01

    This study evaluates the potentialities of a lab-made pLIBS (portable Laser-Induced Breakdown Spectroscopy) to sort volcanic rocks belonging to various magmatic series. An in-situ chemical analysis of 19 atomic lines, including Al, Ba, Ca, Cr, Cu, Fe, Mg, Mn, Na, Si, Sr and Ti, from 21 sampled rocks was performed during a field exploration in Iceland. Iceland was chosen both for the various typologies of volcanic rocks and the rugged conditions in the field in order to test the sturdiness of the pLIPS. Elemental compositions were also measured using laboratory ICP-AES measurements on the same samples. Based on these latter results, which can be used to identify three different groups of volcanic rocks, a classification model was built in order to sort pLIBS data and to categorize unknown samples. Using a reliable statistical scheme applied to LIBS compositional data, the classification capability of the pLIBS system is clearly demonstrated (90–100% success rate). Although this prototype does not provide quantitative measurements, its use should be of particular interest for future geological field investigations. - Highlights: • Portable LIBS applied to field geology • Fast semi-quantitative geochemical analysis of volcanic rocks and magmatic series • Discriminant analysis and statistical treatments for LIBS compositional data.

  1. Laser-induced breakdown spectroscopy of major and minor oxides in steel slags: Influence of detection geometry and signal normalization

    Science.gov (United States)

    Ahamer, C. M.; Eschlböck-Fuchs, S.; Kolmhofer, P. J.; Rössler, R.; Huber, N.; Pedarnig, J. D.

    2016-08-01

    Slag from secondary metallurgy in industrial steel production is analyzed by laser-induced breakdown spectroscopy (LIBS). The major oxides CaO, Al2O3, MgO, SiO2, FeO, MnO, and TiO2 are determined by calibration-free LIBS (CF-LIBS) method. For the minor oxide P2O5 calibration curves are established and the limits of detection (LOD) and the root-mean squared errors of prediction (RMSEP) are determined. The optical emission of the laser-induced plasma is measured for different detection geometries and varying sample position relative to the focal plane of the laser beam. LIBS spectra, plasma parameters, and analytical results are very similar for light collection with optical fibres close to the plasma ("direct detection") and at remote position ("collinear detection"). With collinear detection, the CF-LIBS calculated oxide concentrations are insensitive to sample position along the optical axis over wide range. The detection limits and the prediction errors of minor P2O5 depend on the major slag element used for signal normalization. With Mg and Si as internal reference elements the LOD values are 0.31 wt% and 0.07 wt%, respectively. The RMSEP values are lowest for signal normalization to Si. Calculations of the optical emission of ideal plasma support the experimental preference for Si as reference element in the phosphorous calibration.

  2. Detection of calculus by laser-induced breakdown spectroscopy (LIBS) using an ultra-short pulse laser system (USPL)

    Science.gov (United States)

    Schelle, F.; Brede, O.; Krueger, S.; Oehme, B.; Dehn, C.; Frentzen, M.; Braun, A.

    2011-03-01

    The aim of this study was to assess the detection of calculus by Laser Induced Breakdown Spectroscopy (LIBS). The study was performed with an Nd:YVO4 laser, emitting pulses with a duration of 8 ps at a wavelength of 1064 nm. A repetition rate of 500 kHz at an average power of 5 W was used. Employing a focusing lense, intensities of the order of 1011 W/cm2 were reached on the tooth surface. These high intensities led to the generation of a plasma. The light emitted by the plasma was collimated into a fibre and then analyzed by an echelle spectroscope in the wavelength region from 220 nm - 900 nm. A total number of 15 freshly extracted teeth was used for this study. For each tooth the spectra of calculus and cementum were assessed separately. Comprising all single measurements median values were calculated for the whole spectrum, leading to two specific spectra, one for calculus and one for cementum. For further statistical analysis 28 areas of interest were defined as wavelength regions, in which the signal strength differed regarding the material. In 7 areas the intensity of the calculus spectrum differed statistically significant from the intensity of the cementum spectrum (p minimally invasive method allowing a safe application in laser-guided dentistry.

  3. Detection of zinc and lead in water using evaporative preconcentration and single-particle laser-induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Järvinen, Samu T., E-mail: samu.jarvinen@tut.fi; Saarela, Jaakko; Toivonen, Juha

    2013-08-01

    A novel laser-induced breakdown spectroscopy (LIBS)-based measurement method for metals in water is demonstrated. In the presented technology a small amount of sodium chloride is dissolved in the sample solution before spraying the sample into a tubular oven. After water removal monodisperse dry NaCl aerosol particles are formed where trace metals are present as additives. A single-particle LIBS analysis is then triggered with a scattering based particle detection system. Benefits are the highly increased metal concentration in the LIBS focal volume and the static NaCl-matrix which can be exploited in the signal processing procedure. Emitted light from the emerged plasma plume is collected with wide angle optics and dispersed with a grating spectrometer. In an aqueous solution, the respective limits of detection for zinc and lead were 0.3 ppm and 0.1 ppm using a relatively low 14 mJ laser pulse energy. Zn/Na peak intensity ratio calibration curve for zinc concentration was also determined and LIBS signal dependence on laser pulse energy was investigated. - Highlights: • Metals in a water sample are preconcentrated inside drying salt water droplets. • LIBS measurement from a single 5 μm dry salt particle using low laser pulse energy. • Stable sodium matrix can be utilized in the signal processing. • 0.3 ppm and 0.1 ppm detection limits in water obtained for Zn and Pb respectively.

  4. Development of a Method for the Determination of Chromium and Cadmium in Tannery Wastewater Using Laser-Induced Breakdown Spectroscopy

    Directory of Open Access Journals (Sweden)

    Mahwish Bukhari

    2012-01-01

    Full Text Available This paper illustrates systematic development of a convenient analytical method for the determination of chromium and cadmium in tannery wastewater using laser-induced breakdown spectroscopy (LIBS. A new approach was developed by which liquid was converted into solid phase sample surface using absorption paper for subsequent LIBS analysis. The optimized values of LIBS parameters were 146.7 mJ for chromium and 89.5 mJ for cadmium (laser pulse energy, 4.5 μs (delay time, 70 mm (lens to sample surface distance, and 7 mm (light collection system to sample surface distance. Optimized values of LIBS parameters demonstrated strong spectrum lines for each metal keeping the background noise at minimum level. The new method of preparing metal standards on absorption papers exhibited calibration curves with good linearity with correlation coefficients, R2 in the range of 0.992 to 0.998. The developed method was tested on real tannery wastewater samples for determination of chromium and cadmium.

  5. Can the provenance of the conflict minerals columbite and tantalite be ascertained by laser-induced breakdown spectroscopy?

    Energy Technology Data Exchange (ETDEWEB)

    Harmon, Russell S. [ARL Army Research Office, Environmental Sciences Division, Durham, NC (United States); Shughrue, Katrina M.; Hark, Richard R. [Juniata College, Department of Chemistry, Huntingdon, PA (United States); Remus, Jeremiah J. [Clarkson University, Department of Electrical and Computer Engineering, Potsdam, NY (United States); Wise, Michael A. [Smithsonian Institution, Department of Mineral Sciences, Washington, DC (United States); East, Lucille J. [Applied Spectra, Inc., Fremont, CA (United States)

    2011-07-15

    Conflict minerals is a term applied to ores mined in conditions of armed conflict and human rights abuse. Niobium and tantalum are two rare metals whose primary natural occurrence is in the complex oxide minerals columbite and tantalite, the ore of which is commonly referred to as coltan. The illicit export of coltan ore from the Democratic Republic of the Congo is thought to be responsible for financing the ongoing civil conflicts in this region. Determining the chemical composition of an ore is one of the means of ascertaining its provenance. Laser-induced breakdown spectroscopy (LIBS) offers a means of rapidly distinguishing different geographic sources for a mineral because the LIBS plasma emission spectrum provides the complete chemical composition (i.e., ''chemical fingerprint'') of any material in real time. To test this idea for columbite-tantalite, three sample sets were analyzed. Partial least squares discriminant analysis (PLSDA) allows correct sample-level geographic discrimination at a success rate exceeding 90%. (orig.)

  6. Nanometer-film analysis by the laser-induced breakdown spectroscopy method: the effects of laser focus to sample distance.

    Science.gov (United States)

    Sun, Yuxiang; Zhong, Shilei; Shan, Fukai; Lu, Yuan; Sun, Xin; Liu, Zhe; Sheng, Pengpeng

    2015-05-20

    In order to develop a method to analyze metal elements in thin-film samples rapidly, directly and without sample preparation, and to understand the mechanism of laser-film interaction and plasma formation and evolution, a laboratory laser-induced breakdown spectroscopy system was established recently for nanometer-film analysis. ZrO(2) films prepared on silicon chips by a sol-gel process were employed in the following experiment and their thickness was about 40 nm. By the initial investigation that we carried out, the stability of this system was verified and the relative standard deviation of the target peak was found to be lower than 1.6% with the help of a position system. The influences of different experimental parameters, such as laser energy, laser focus to sample distance (LFTSD) settings, and gate delay, were studied under conditions of room temperature and atmospheric pressure. The experimental results show that the LFTSD was one of the most important parameters for plasma formation and spectral collection in comparison with other parameters by means of plasma spectra and images. So the effects of the LFTSD on the spectra, plasma evolution, and craters are specially discussed in this paper. At last, we calculated the plasma temperature and electron density under optimal parameters for quantitative analysis. The result shows that the established system is available for qualitative and quantitative analysis of films under conditions of single pulse and low ablation energy.

  7. Effect of liquid-sheet thickness on detection sensitivity for laser-induced breakdown spectroscopy of aqueous solution.

    Science.gov (United States)

    Ohba, Hironori; Saeki, Morihisa; Wakaida, Ikuo; Tanabe, Rie; Ito, Yoshiro

    2014-10-01

    For aqueous-solution-based elemental analysis, we used a thin liquid sheet (μm-scale thickness) in laser-induced breakdown spectroscopy with nanosecond laser pulses. Laser-induced plasma is emitted by focusing a pulsed Nd:YAG laser (1064 nm) on a 5- to 80-μm-thick liquid sheet in air. To optimize the conditions for detecting elements, we studied how the signal-to-background ratio (SBR) for Hα Balmer and Na-neutral emission lines depends on the liquid-sheet thickness. The SBR of the Hα Balmer and Na-neutral lines was maximized for a sheet thickness of ~20 μm at the laser energy of 100 mJ. The hydrodynamics of liquid flow induced by the laser pulse was analyzed by laser flash shadowgraph imaging. Time-resolved observation of the hydrodynamics and plasma emission suggests that the dependence of the SBR on the liquid-sheet thickness is correlated with the volume of flowing liquid that interacts with the laser pulses.

  8. Laser-induced breakdown spectroscopy for determination of uranium in thorium-uranium mixed oxide fuel materials.

    Science.gov (United States)

    Sarkar, Arnab; Alamelu, Devanathan; Aggarwal, Suresh K

    2009-05-15

    Laser-induced breakdown spectroscopy (LIBS) has been developed for determining the percentage of uranium in thorium-uranium mixed oxide fuel samples required as a part of the chemical quality assurance of fuel materials. The experimental parameters were optimized using mixed oxide pellets prepared from 1:1 (w/w) mixture of thorium-uranium mixed oxide standards and using boric acid as a binder. Calibration curves were established using U(II) 263.553 nm, U(II) 367.007 nm, U(II) 447.233 nm and U(II) 454.363 nm emission lines. The uranium amount determined in two synthetic mixed oxide samples using calibration curves agreed well with that of the expected values. Except for U(II) 263.553 nm, all the other emission lines exhibited a saturation effect due to self-absorption when U amount exceeded 20 wt.% in the Th-U mixture. The present method will be useful for fast and routine determination of uranium in mixed oxide samples of Th and U, without the need for dissolution, which is difficult and time consuming due to the refractory nature of ThO(2). The methodology developed is encouraging since a very good analytical agreement was obtained considering the limited resolution of the spectrometer employed in the work.

  9. Fast and sensitive trace metal analysis in aqueous solutions by laser-induced breakdown spectroscopy using wood slice substrates

    Energy Technology Data Exchange (ETDEWEB)

    Chen Zhijiang; Li Hongkun; Liu Ming [School of Physics, South China University of Technology, Guangzhou 510641 (China); Li Runhua [School of Physics, South China University of Technology, Guangzhou 510641 (China)], E-mail: rhli@scut.edu.cn

    2008-01-15

    To perform fast and sensitive trace metal analysis in aqueous solutions by laser-induced breakdown spectroscopy (LIBS) based on only one single-pulse laser system, a wood slice has been used as a liquid absorber to transform liquid sample analysis to solid sample analysis using LIBS. High detection sensitivity and good reproducibility can be achieved with this approach. Calibration curves for five metal elements, Cr, Mn, Cu, Cd, and Pb under trace concentrations, have been obtained, and the limits of their detection were determined to be in the range of 0.029-0.59 mg L{sup -1}, 2-3 orders better than those obtained by directly analyzing liquid samples where the laser was focused on a liquid surface. The wood slice was very easy to handle and thus, the whole analysis process took only 4-5 min for each sample. This approach provides a more practical approach for fast and sensitive metal element analysis in aqueous solutions using LIBS, which is especially useful for monitoring toxic heavy metals in water.

  10. Fast and sensitive trace metal analysis in aqueous solutions by laser-induced breakdown spectroscopy using wood slice substrates

    Science.gov (United States)

    Chen, Zhijiang; Li, Hongkun; Liu, Ming; Li, Runhua

    2008-01-01

    To perform fast and sensitive trace metal analysis in aqueous solutions by laser-induced breakdown spectroscopy (LIBS) based on only one single-pulse laser system, a wood slice has been used as a liquid absorber to transform liquid sample analysis to solid sample analysis using LIBS. High detection sensitivity and good reproducibility can be achieved with this approach. Calibration curves for five metal elements, Cr, Mn, Cu, Cd, and Pb under trace concentrations, have been obtained, and the limits of their detection were determined to be in the range of 0.029-0.59 mg L - 1 , 2-3 orders better than those obtained by directly analyzing liquid samples where the laser was focused on a liquid surface. The wood slice was very easy to handle and thus, the whole analysis process took only 4-5 min for each sample. This approach provides a more practical approach for fast and sensitive metal element analysis in aqueous solutions using LIBS, which is especially useful for monitoring toxic heavy metals in water.

  11. Application of Laser Induced Breakdown Spectroscopy in Early Detection of Red Palm Weevil: (Rhynchophorus ferrugineus) Infestation in Date Palm

    Science.gov (United States)

    A. Farooq, W.; G. Rasool, K.; Walid, Tawfik; S. Aldawood, A.

    2015-11-01

    The Kingdom of Saudi Arabia is one of the leading date producing countries. Unfortunately, this important fruit crop is under great threat from the red palm weevil (RPW) (Rhynchophorus ferrugineus), which is a highly invasive pest. Several techniques, including visual inspection, acoustic sensors, sniffer dogs, and pheromone traps have been tried to detect the early stages of a RPW infestation; however, each method has suffered certain logistical and implementation issues. We have applied laser induced breakdown spectroscopy (LIBS) for the early detection of RPW infestation. Through the analysis of the observed LIBS spectra of different infested and healthy samples, we have found presence of Ca, Mg, Na, C, K elements and OH, CN molecules. The spectra also reveal that with the population growth of the pest, the intensity of Mg and Ca atomic lines in LIBS spectra increases rapidly. Similar behavior is observed in the molecular lines of LIBS spectra. The obtained results indicate that the LIBS technique can be used for the early detection of RPW infestation without damaging the date palms.

  12. Laser-induced breakdown spectroscopy: a tool for real-time, in vitro and in vivo identification of carious teeth.

    Science.gov (United States)

    Samek, Ota; Telle, Helmut H; Beddows, David CS

    2001-01-01

    BACKGROUND: Laser Induced Breakdown Spectroscopy (LIBS) can be used to measure trace element concentrations in solids, liquids and gases, with spatial resolution and absolute quantifaction being feasible, down to parts-per-million concentration levels. Some applications of LIBS do not necessarily require exact, quantitative measurements. These include applications in dentistry, which are of a more "identify-and-sort" nature - e.g. identification of teeth affected by caries. METHODS: A one-fibre light delivery / collection assembly for LIBS analysis was used, which in principle lends itself for routine in vitro / in vivo applications in a dental practice. A number of evaluation algorithms for LIBS data can be used to assess the similarity of a spectrum, measured at specific sample locations, with a training set of reference spectra. Here, the description has been restricted to one pattern recognition algorithm, namely the so-called Mahalanobis Distance method. RESULTS: The plasma created when the laser pulse ablates the sample (in vitro / in vivo), was spectrally analysed. We demonstrated that, using the Mahalanobis Distance pattern recognition algorithm, we could unambiguously determine the identity of an "unknown" tooth sample in real time. Based on single spectra obtained from the sample, the transition from caries-affected to healthy tooth material could be distinguished, with high spatial resolution. CONCLUSIONS: The combination of LIBS and pattern recognition algorithms provides a potentially useful tool for dentists for fast material identification problems, such as for example the precise control of the laser drilling / cleaning process.

  13. Laser-induced breakdown spectroscopy: a tool for real-time, in vitro and in vivo identification of carious teeth

    Directory of Open Access Journals (Sweden)

    Beddows David CS

    2001-12-01

    Full Text Available Abstract Background Laser Induced Breakdown Spectroscopy (LIBS can be used to measure trace element concentrations in solids, liquids and gases, with spatial resolution and absolute quantifaction being feasible, down to parts-per-million concentration levels. Some applications of LIBS do not necessarily require exact, quantitative measurements. These include applications in dentistry, which are of a more "identify-and-sort" nature – e.g. identification of teeth affected by caries. Methods A one-fibre light delivery / collection assembly for LIBS analysis was used, which in principle lends itself for routine in vitro / in vivo applications in a dental practice. A number of evaluation algorithms for LIBS data can be used to assess the similarity of a spectrum, measured at specific sample locations, with a training set of reference spectra. Here, the description has been restricted to one pattern recognition algorithm, namely the so-called Mahalanobis Distance method. Results The plasma created when the laser pulse ablates the sample (in vitro / in vivo, was spectrally analysed. We demonstrated that, using the Mahalanobis Distance pattern recognition algorithm, we could unambiguously determine the identity of an "unknown" tooth sample in real time. Based on single spectra obtained from the sample, the transition from caries-affected to healthy tooth material could be distinguished, with high spatial resolution. Conclusions The combination of LIBS and pattern recognition algorithms provides a potentially useful tool for dentists for fast material identification problems, such as for example the precise control of the laser drilling / cleaning process.

  14. [Analysis of lead in unknown samples based on the standard addition method using laser induced breakdown spectroscopy].

    Science.gov (United States)

    Fang, Li; Zhao, Nan-jing; Meng, De-shuo; Yuan, Jing; Tang, Jie; Wang, Yin; Yu, Yang; Ma, Ming-jun; Hu, Li; Zhang, Da-hai; Xiao, Xue; Wang, Yu; Liu, Jian-guo; Liu, Wen-qing

    2015-01-01

    The standard addition method with laser induced breakdown spectroscopy was used to analyze an unknown sample taken from a lead battery factory. the matrix influence on the results was effectively avoided when the external or internal standard method was used, and the pretreatment of samples was simple and quick. The Nd ' YAG pulse laser with wavelength 1 064 nm was used as the excitation source. The echelle spectroscopy with high resolution and wide spectral range was used as the spectral separation device, and the intensified charge coupled device (ICCD) as the spectral detection device in the experiment. The characteristic line at 405. 78 nrn was chosen as the analysis line to measure Pb concentration. Fe I : 404. 58 line was chosen as the internal standard. Pre-experiment was carried out to confirm the appropriate condition. Under the laser energy of 128. 5 mJ, the delay time of 2. 5 tps, and the gate width of 3 ps, it was determined that with the addition of Pb to the sample in the range of 0 and 25 000 mg . kg-1, there wasn't self-absorption. There was a good linear relationship between the intensity of the spectral line of 405. 78 nm and the addition of Pb. The appropriate concentration of Pb added into the sample for analysis was determined by this series of samples. On this basis, four samples were prepared with three parallel samples for each sample in order to verify the repeatability and reliability of the method, i. e. 5 000, 10 000, 15 000, 20 000 mg . kg-1 Pb was added into the original sample. The results were compared with the result of ICP-MS. The twelve samples' relative errors were between -24. 6% and 17. 6%. The average result was 43 069 mg . kg-1 with the relative error -2. 44%.

  15. New Approach for Near-Real-Time Measurement of Elemental Composition of Aerosol Using Laser-Induced Breakdown Spectroscopy

    Science.gov (United States)

    Diwakar, Prasoon; Kulkarni, Pramod; Birch, M. Eileen

    2015-01-01

    A new approach has been developed for making near-real-time measurement of elemental composition of aerosols using plasma spectroscopy. The method allows preconcentration of miniscule particle mass (pg to ng) directly from the sampled aerosol stream through electrostatic deposition of charged particles (30–900 nm) onto a flat-tip microneedle electrode. The collected material is subsequently ablated from the electrode and monitored by laser-induced breakdown spectroscopy. Atomic emission spectra were collected using a broadband spectrometer with a wavelength range of 200–980 nm. A single-sensor delay time of 1.3 μs was used in the spectrometer for all elements to allow simultaneous measurement of multiple elements. The system was calibrated for various elements including Cd, Cr, Cu, Mn, Na, and Ti. The absolute mass detection limits for these elements were experimentally determined and found to be in the range of 0.018–5 ng. The electrostatic collection technique has many advantages over other substrate-based methods involving aerosol collection on a filter or its focused deposition using an aerodynamic lens. Because the particle mass is collected over a very small area that is smaller than the spatial extent of the laser-induced plasma, the entire mass is available for analysis. This considerably improves reliability of the calibration and enhances measurement accuracy and precision. Further, the aerosol collection technique involves very low pressure drop, thereby allowing higher sample flow rates with much smaller pumps—a desirable feature for portable instrumentation. Higher flow rates also make it feasible to measure trace element concentrations at part per trillion levels. Detection limits in the range of 18–670 ng m−3 can be achieved for most of the elements studied at a flow rate of 1.5 L min−1 with sampling times of 5 min. PMID:26692632

  16. Laser-induced breakdown spectroscopy (LIBS) combined with hyperspectral imaging for the evaluation of printed circuit board composition.

    Science.gov (United States)

    Carvalho, Rodrigo R V; Coelho, Jomarc A O; Santos, Jozemir M; Aquino, Francisco W B; Carneiro, Renato L; Pereira-Filho, Edenir R

    2015-03-01

    In this study, laser-induced breakdown spectroscopy (LIBS) was combined with chemometric strategies (PCA, Principal Component Analysis) and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS) to investigate the metal composition of a printed circuit board (PCB) sample from a mobile phone. Scanning electron microscopy-EDS was used for two main reasons: it was possible at the same time to visualize the sample surface, craters (made by the laser pulses) and also the chemical composition of the samples. A 30 mm×40 mm area of the mobile phone PCB sample, which was manufactured in 2011, was investigated. In this case, a matrix with 30 rows and 40 columns (1200 points) was analyzed, and 10 pulses were performed at each point. A total of 12,000 emission spectra were recorded in the wavelength range from 186 to 1040 nm. After an initial exploratory investigation using PCA, 18 emission lines were selected (representing the elements Al, Au, Ba, Ca, Co, Cu, Fe, K, Li, Mg, Mn, Na, Ni, Sb, Si, Sn, Ti and Zn) and then normalized by the relative intensities, and a new PCA was calculated with the autoscaled data. For example, Au and Si were mainly observed in the superficial electrical contacts and in the bulk of the PCB, respectively. A second sample (a mouse PCB) was also analyzed and Pb (emission lines 357.273, 363.956, 368.346, 373.994 and 405.780 nm) was identified in the solders. In addition, this element was determined using FAAS (flame atomic absorption spectrometry) and the Pb concentration was around 25% (w/w). This study opens the possibility for improved recycling processes and the chemical investigation of solid samples measuring a few millimeters in dimension without sample preparation. Copyright © 2014 Elsevier B.V. All rights reserved.

  17. New Approach for Near-Real-Time Measurement of Elemental Composition of Aerosol Using Laser-Induced Breakdown Spectroscopy.

    Science.gov (United States)

    Diwakar, Prasoon; Kulkarni, Pramod; Birch, M Eileen

    A new approach has been developed for making near-real-time measurement of elemental composition of aerosols using plasma spectroscopy. The method allows preconcentration of miniscule particle mass (pg to ng) directly from the sampled aerosol stream through electrostatic deposition of charged particles (30-900 nm) onto a flat-tip microneedle electrode. The collected material is subsequently ablated from the electrode and monitored by laser-induced breakdown spectroscopy. Atomic emission spectra were collected using a broadband spectrometer with a wavelength range of 200-980 nm. A single-sensor delay time of 1.3 μs was used in the spectrometer for all elements to allow simultaneous measurement of multiple elements. The system was calibrated for various elements including Cd, Cr, Cu, Mn, Na, and Ti. The absolute mass detection limits for these elements were experimentally determined and found to be in the range of 0.018-5 ng. The electrostatic collection technique has many advantages over other substrate-based methods involving aerosol collection on a filter or its focused deposition using an aerodynamic lens. Because the particle mass is collected over a very small area that is smaller than the spatial extent of the laser-induced plasma, the entire mass is available for analysis. This considerably improves reliability of the calibration and enhances measurement accuracy and precision. Further, the aerosol collection technique involves very low pressure drop, thereby allowing higher sample flow rates with much smaller pumps-a desirable feature for portable instrumentation. Higher flow rates also make it feasible to measure trace element concentrations at part per trillion levels. Detection limits in the range of 18-670 ng m(-3) can be achieved for most of the elements studied at a flow rate of 1.5 L min(-1) with sampling times of 5 min.

  18. Feasibility of real-time geochemical analysis using LIBS (Laser-Induced Breakdown Spectroscopy) in oil wells

    Science.gov (United States)

    Shahin, Mohamed

    2014-05-01

    The oil and gas industry has attempted for many years to find new ways to analyze and determine the type of rocks drilled on a real time basis. Mud analysis logging is a direct method of detecting oil and gas in formations drilled, it depends on the "feel" of the bit to decide formation type, as well as, geochemical analysis which was introduced 30 years ago, starting with a pulsed-neutron generator (PNG) based wireline tool upon which LWD technology was based. In this paper, we are studying the feasibility of introducing a new technology for real-time geochemical analysis. Laser-induced breakdown spectroscopy (LIBS) is a type of atomic emission spectroscopy, It is a cutting-edge technology that is used for many applications such as determination of alloy composition, origin of manufacture (by monitoring trace components), and molecular analysis (unknown identification). LIBS can analyze any material regardless of its state (solid, liquid or gas), based upon that fact, we can analyze rocks, formation fluids' types and contacts between them. In cooperation with the National Institute of Laser Enhanced Science, Cairo University in Egypt, we've done tests on sandstone, limestone and coal samples acquired from different places using Nd: YAG Laser with in addition to other components that are explained in details through this paper to understand the ability of Laser to analyze rock samples and provide their elemental composition using LIBS technique. We've got promising results from the sample analysis via LIBS and discussed the possibility of deploying this technology in oilfields suggesting many applications and giving a base for achieving a quantitative elemental analysis method in view of its shortcomings and solutions.

  19. Approaching the ppb detection limits for copper in water using laser induced breakdown spectroscopy

    Science.gov (United States)

    Tawfik, Walid; Sawaf, Sausan

    2014-05-01

    Copper concentrations in drinking-water is very important to be monitored which can cause cancer if it exceed about 10 mg/liter. In the present work, we have developed a simple, low laser power method to improve the detection limits of laser induced plasma spectroscopy LIBS for copper in aqueous solutions with different concentrations. In this method a medium density fiberboard (MDF) wood have been used as a substrate that absorbs the liquid sample to transform laser liquid interaction to laser solid interaction. Using the fundamental wavelength of Nd:YAG laser, the constructed plasma emissions were monitored for elemental analysis. The signal-to-noise ratio SNR was optimized using low laser fluence of 32 J cm-2, and detector (CDD camera) gate delay of 0.5 μs. Both the electron temperature and density of the induced plasma were determined using Boltzmann plot and the FWHM of the Cu at 324.7 nm, respectively. The plasma temperature was found to be 1.197 eV, while the plasma density was about 1.66 x 1019 cm-3. The detection limits for Cu at 324.7 nm is found to be 131 ppb comparable to the results by others using complicated system.

  20. On Heuristic Approach for Solution of Scheduling Problem Involving Transportation Time and Break-down Times for Three Machines

    Directory of Open Access Journals (Sweden)

    A. Khodadadi

    2014-04-01

    Full Text Available In most manufacturing and distribution systems, semi-finished jobs are transferred from one processing facility to another by transporters such as automated guided vehicles and conveyors and finished jobs are delivered to customers or warehouses by vehicles such as trucks. Most machine scheduling models assume either that there are a finite number of transporters for delivering jobs or that jobs are delivered instantaneously from one location to another without transportation time involved. In this study we study a new simple heuristic algorithm for a ‘3-machine, n-job’ flow shop scheduling problem in which transportation time and break down times of machines are considered. A heuristic approach method to find optimal and near optimal sequence minimizing the total elapsed time.

  1. Dispersive liquid–liquid microextraction for metals enrichment: A useful strategy for improving sensitivity of laser-induced breakdown spectroscopy in liquid samples analysis

    OpenAIRE

    Aguirre Pastor, Miguel Ángel; Selva, E.J.; Hidalgo, Montserrat; Canals, Antonio

    2015-01-01

    A rapid and efficient Dispersive Liquid–Liquid Microextraction (DLLME) followed by Laser-Induced Breakdown Spectroscopy detection (LIBS) was evaluated for simultaneous determination of Cr, Cu, Mn, Ni and Zn in water samples. Metals in the samples were extracted with tetrachloromethane as pyrrolidinedithiocarbamate (APDC) complexes, using vortex agitation to achieve dispersion of the extractant solvent. Several DLLME experimental factors affecting extraction efficiency were optimized with a mu...

  2. Accurate quantitative analysis of gold alloys using multi-pulse laser induced breakdown spectroscopy and a correlation-based calibration method

    Energy Technology Data Exchange (ETDEWEB)

    Galbacs, Gabor [Department of Inorganic and Analytical Chemistry, University of Szeged, 6720 Szeged, Dom ter 7. (Hungary)], E-mail: galbx@chem.u-szeged.hu; Jedlinszki, Nikoletta; Cseh, Gabor; Galbacs, Zoltan; Turi, Laszlo [Department of Inorganic and Analytical Chemistry, University of Szeged, 6720 Szeged, Dom ter 7. (Hungary)

    2008-05-15

    Multi-pulse laser induced breakdown spectroscopy (LIBS), in combination with the generalized linear correlation calibration method (GLCM), was applied to the quantitative analysis (fineness determination) of quaternary gold alloys. Accuracy and precision on the order of a few thousandths ( per mille ) was achieved. The analytical performance is directly comparable to that of the standard cupellation method (fire assay), but provides results within minutes and is virtually non-destructive, as it consumes only a few micrograms of the sample.

  3. Monitoring of the heavy-metal hyperaccumulation in vegetal tissues by X-ray radiography and by femto-second laser induced breakdown spectroscopy.

    Science.gov (United States)

    Kaiser, J; Samek, O; Reale, L; Liska, M; Malina, R; Ritucci, A; Poma, A; Tucci, A; Flora, F; Lai, A; Mancini, L; Tromba, G; Zanini, F; Faenov, A; Pikuz, T; Cinque, G

    2007-02-01

    This article reports on the utilization of X-ray microradiography and laser induced breakdown spectroscopy (LIBS) techniques for investigation of the metal accumulation in different part of leaf samples. The potential of the LIBS-analysis for finding the proper plant species for phytoremediation is compared with the results of microradiography measurements at the HERCULES source at ENEA, Rome (Italy) and X-ray microradiography experiments at the ELETTRA Synchrotron, Trieste (Italy).

  4. Comparative measurements of mineral elements in milk powders with laser-induced breakdown spectroscopy and inductively coupled plasma atomic emission spectroscopy.

    Science.gov (United States)

    Lei, W Q; El Haddad, J; Motto-Ros, V; Gilon-Delepine, N; Stankova, A; Ma, Q L; Bai, X S; Zheng, L J; Zeng, H P; Yu, J

    2011-07-01

    Mineral elements contained in commercially available milk powders, including seven infant formulae and one adult milk, were analyzed with inductively coupled plasma atomic emission spectrometry (ICP-AES) and laser-induced breakdown spectroscopy (LIBS). The purpose of this work was, through a direct comparison of the analytical results, to provide an assessment of the performance of LIBS, and especially of the procedure of calibration-free LIBS (CF-LIBS), to deal with organic compounds such as milk powders. In our experiments, the matrix effect was clearly observed affecting the analytical results each time laser ablation was employed for sampling. Such effect was in addition directly observed by determining the physical parameters of the plasmas induced on the different samples. The CF-LIBS procedure was implemented to deduce the concentrations of Mg and K with Ca as the internal reference element. Quantitative analytical results with CF-LIBS were validated with ICP-AES measurements and nominal concentrations specified for commercial milks. The obtained good results with the CF-LIBS procedure demonstrate its capacity to take into account the difference in physical parameters of the plasma in the calculation of the concentrations of mineral elements, which allows a significant reduction of the matrix effect related to laser ablation. We finally discuss the way to optimize the implementation of the CF-LIBS procedure for the analysis of mineral elements in organic materials.

  5. Comparison of field portable measurements of ultrafine TiO2: X-ray fluorescence, laser-induced breakdown spectroscopy, and Fourier-transform infrared spectroscopy.

    Science.gov (United States)

    LeBouf, Ryan F; Miller, Arthur L; Stipe, Christopher; Brown, Jonathan; Murphy, Nate; Stefaniak, Aleksandr B

    2013-06-01

    Laboratory measurements of ultrafine titanium dioxide (TiO2) particulate matter loaded on filters were made using three field portable methods (X-ray fluorescence (XRF), laser-induced breakdown spectroscopy (LIBS), and Fourier-transform infrared (FTIR) spectroscopy) to assess their potential for determining end-of-shift exposure. Ultrafine TiO2 particles were aerosolized and collected onto 37 mm polycarbonate track-etched (PCTE) filters in the range of 3 to 578 μg titanium (Ti). Limit of detection (LOD), limit of quantification (LOQ), and calibration fit were determined for each measurement method. The LOD's were 11.8, 0.032, and 108 μg Ti per filter, for XRF, LIBS, and FTIR, respectively and the LOQ's were 39.2, 0.11, and 361 μg Ti per filter, respectively. The XRF calibration curve was linear over the widest dynamic range, up to the maximum loading tested (578 μg Ti per filter). LIBS was more sensitive but, due to the sample preparation method, the highest loaded filter measurable was 252 μg Ti per filter. XRF and LIBS had good predictability measured by regressing the predicted mass to the gravimetric mass on the filter. XRF and LIBS produced overestimations of 4% and 2%, respectively, with coefficients of determination (R(2)) of 0.995 and 0.998. FTIR measurements were less dependable due to interference from the PCTE filter media and overestimated mass by 2% with an R(2) of 0.831.

  6. Monte Carlo standardless approach for laser induced breakdown spectroscopy based on massive parallel graphic processing unit computing

    Science.gov (United States)

    Demidov, A.; Eschlböck-Fuchs, S.; Kazakov, A. Ya.; Gornushkin, I. B.; Kolmhofer, P. J.; Pedarnig, J. D.; Huber, N.; Heitz, J.; Schmid, T.; Rössler, R.; Panne, U.

    2016-11-01

    The improved Monte-Carlo (MC) method for standard-less analysis in laser induced breakdown spectroscopy (LIBS) is presented. Concentrations in MC LIBS are found by fitting model-generated synthetic spectra to experimental spectra. The current version of MC LIBS is based on the graphic processing unit (GPU) computation and reduces the analysis time down to several seconds per spectrum/sample. The previous version of MC LIBS which was based on the central processing unit (CPU) computation requested unacceptably long analysis times of 10's minutes per spectrum/sample. The reduction of the computational time is achieved through the massively parallel computing on the GPU which embeds thousands of co-processors. It is shown that the number of iterations on the GPU exceeds that on the CPU by a factor > 1000 for the 5-dimentional parameter space and yet requires > 10-fold shorter computational time. The improved GPU-MC LIBS outperforms the CPU-MS LIBS in terms of accuracy, precision, and analysis time. The performance is tested on LIBS-spectra obtained from pelletized powders of metal oxides consisting of CaO, Fe2O3, MgO, and TiO2 that simulated by-products of steel industry, steel slags. It is demonstrated that GPU-based MC LIBS is capable of rapid multi-element analysis with relative error between 1 and 10's percent that is sufficient for industrial applications (e.g. steel slag analysis). The results of the improved GPU-based MC LIBS are positively compared to that of the CPU-based MC LIBS as well as to the results of the standard calibration-free (CF) LIBS based on the Boltzmann plot method.

  7. On the performance of laser-induced breakdown spectroscopy for direct determination of trace metals in lubricating oils

    Energy Technology Data Exchange (ETDEWEB)

    Zheng, Lijuan [Institut Lumière Matière, UMR5306 Université Lyon 1-CNRS, Université de Lyon, 69622 Villeurbanne Cedex (France); State Key Laboratory of Precision Spectroscopy, East China Normal University, Shanghai 200062 (China); Cao, Fan; Xiu, Junshan; Bai, Xueshi; Motto-Ros, Vincent [Institut Lumière Matière, UMR5306 Université Lyon 1-CNRS, Université de Lyon, 69622 Villeurbanne Cedex (France); Gilon, Nicole [Institut des Sciences Analytiques, UMR5280 Université Lyon 1-CNRS, Université de Lyon, 69622 Villeurbanne Cedex (France); Zeng, Heping [State Key Laboratory of Precision Spectroscopy, East China Normal University, Shanghai 200062 (China); Yu, Jin, E-mail: jin.yu@univ-lyon1.fr [Institut Lumière Matière, UMR5306 Université Lyon 1-CNRS, Université de Lyon, 69622 Villeurbanne Cedex (France); Key Laboratory for Laser Plasmas (Ministry of Education), Department of Physics and Astrophysics, Shanghai Jiao Tong University, Shanghai 200240 (China)

    2014-09-01

    Laser-induced breakdown spectroscopy (LIBS) provides a technique to directly determine metals in viscous liquids and especially in lubricating oils. A specific laser ablation configuration of a thin layer of oil applied on the surface of a pure aluminum target was used to evaluate the analytical figures of merit of LIBS for elemental analysis of lubricating oils. Among the analyzed oils, there were a certified 75cSt blank mineral oil, 8 virgin lubricating oils (synthetic, semi-synthetic, or mineral and of 2 different manufacturers), 5 used oils (corresponding to 5 among the 8 virgin oils), and a cooking oil. The certified blank oil and 4 virgin lubricating oils were spiked with metallo-organic standards to obtain laboratory reference samples with different oil matrix. We first established calibration curves for 3 elements, Fe, Cr, Ni, with the 5 sets of laboratory reference samples in order to evaluate the matrix effect by the comparison among the different oils. Our results show that generalized calibration curves can be built for the 3 analyzed elements by merging the measured line intensities of the 5 sets of spiked oil samples. Such merged calibration curves with good correlation of the merged data are only possible if no significant matrix effect affects the measurements of the different oils. In the second step, we spiked the remaining 4 virgin oils and the cooking oils with Fe, Cr and Ni. The accuracy and the precision of the concentration determination in these prepared oils were then evaluated using the generalized calibration curves. The concentrations of metallic elements in the 5 used lubricating oils were finally determined. - Highlights: • Direct determination of wear metals in lubricating oils using LIBS. • Generalized calibration curves for different oils. • Ablation of a thin oil layer on a pure metallic target.

  8. On the performance of laser-induced breakdown spectroscopy for direct determination of trace metals in lubricating oils

    Science.gov (United States)

    Zheng, Lijuan; Cao, Fan; Xiu, Junshan; Bai, Xueshi; Motto-Ros, Vincent; Gilon, Nicole; Zeng, Heping; Yu, Jin

    2014-09-01

    Laser-induced breakdown spectroscopy (LIBS) provides a technique to directly determine metals in viscous liquids and especially in lubricating oils. A specific laser ablation configuration of a thin layer of oil applied on the surface of a pure aluminum target was used to evaluate the analytical figures of merit of LIBS for elemental analysis of lubricating oils. Among the analyzed oils, there were a certified 75cSt blank mineral oil, 8 virgin lubricating oils (synthetic, semi-synthetic, or mineral and of 2 different manufacturers), 5 used oils (corresponding to 5 among the 8 virgin oils), and a cooking oil. The certified blank oil and 4 virgin lubricating oils were spiked with metallo-organic standards to obtain laboratory reference samples with different oil matrix. We first established calibration curves for 3 elements, Fe, Cr, Ni, with the 5 sets of laboratory reference samples in order to evaluate the matrix effect by the comparison among the different oils. Our results show that generalized calibration curves can be built for the 3 analyzed elements by merging the measured line intensities of the 5 sets of spiked oil samples. Such merged calibration curves with good correlation of the merged data are only possible if no significant matrix effect affects the measurements of the different oils. In the second step, we spiked the remaining 4 virgin oils and the cooking oils with Fe, Cr and Ni. The accuracy and the precision of the concentration determination in these prepared oils were then evaluated using the generalized calibration curves. The concentrations of metallic elements in the 5 used lubricating oils were finally determined.

  9. Detection of Ni, Pb and Zn in water using electrodynamic single-particle levitation and laser-induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Järvinen, Samu T., E-mail: samu.jarvinen@tut.fi; Saari, Sampo; Keskinen, Jorma; Toivonen, Juha

    2014-09-01

    We report the development of a unique laser-induced breakdown spectroscopy (LIBS) based method for the trace metal analysis of water. The method is further applied to the analysis of aqueous samples containing known concentrations of nickel, lead and zinc. Effects that reduce the sensitivity of the LIBS analysis of aqueous samples were avoided in the presented technology by performing the LIBS analysis from a single dried salt particle which was levitated in an electric field. The salt is added to the water sample prior to analysis. A single-droplet generator injects a droplet of the solution to the measurement chamber. The droplet is trapped using electrodynamic balance technology and metals are highly concentrated as the water from the droplet rapidly evaporates without a need for additional heating. The resultant solid 7 μm particle is levitated with a high spatial stability in the LIBS focal volume. The constant mass and position of the particle enable the high reproducibility of the LIBS signal. The limits of detection in the original solution were recorded low 60 ppb, 60 ppb, and 50 ppb for nickel, lead, and zinc, respectively using low, 14 mJ excitation pulse energy. The methodology is applicable to the online monitoring of industrial waters due to the achieved sensitivity and robust instrumentation. - Highlights: • A single droplet of the water sample is trapped electrodynamically. • Metals in the droplet are rapidly preconcentrated as the water evaporates. • LIBS measurement from a single 7 μm dry salt particle using low laser pulse energy • Repeatable LIBS signal due to constant sample position and mass • Obtained detection limits for Ni, Pb and Zn were 60 ppb, 60 ppb and 50 ppb, respectively.

  10. Improved Measurement Performance of Inorganic Elements in Coal by Laser-Induced Breakdown Spectroscopy Coupled with Internal Standardization

    Science.gov (United States)

    Yao, Shunchun; Xu, Jialong; Bai, Kaijie; Lu, Jidong

    2015-11-01

    Laser-induced breakdown spectroscopy was employed to determine the inorganic elements in coal. To improve the measurement's accuracy and precision, a new internal standardization scheme, which we named changed internal standardization, was compared with the traditional internal standardization and no internal standardization for the analysis of inorganic elements. The new internal standardization scheme used the atomic line of carbon at 247.86 nm and the molecular band of CN at 388.34 nm and C2 at 516.32 nm to normalize the lines of inorganic elements that were distributed in the same spectral channel. The performance of the utilization of the new internal standardization scheme was evaluated using a set of coal samples, including twenty calibration samples and five validation samples. The results show that the coefficients of determination R2 and the slope of calibration models coupled with changed internal standardization are better than that of the calibration models coupled with fixed internal standardization and no internal standardization. Moreover, the measurement accuracy and reproducibility of changed internal standardization for the analysis of five validation samples also yielded further improvement. The results that we obtained suggest that changed internal standardization could compensate for the matrix effects, as well as the influence of the difference in the spectral response of the light collection system. supported by Open Research Fund of State Key Laboratory of Pulsed Power Laser Technology of China (No. SKL2013KF03), National Natural Science Foundation of China (Nos. 51206055, 51476061), the Fundamental Research Funds for the Central Universities of China (No. 2014ZZ0014), the New Star of Pearl River on Science and Technology of Guangzhou, China (No. 2014J2200054), the Key Laboratory of Efficient and Clean Energy Utilization of Guangdong Higher Education Institutes of China (No. KLB10004) and Guangdong Province Key Laboratory of Efficient and

  11. Sampling considerations when analyzing micrometric-sized particles in a liquid jet using laser induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Faye, C.B.; Amodeo, T.; Fréjafon, E. [Institut National de l' Environnement Industriel et des Risques (INERIS/DRC/CARA/NOVA), Parc Technologique Alata, BP 2, 60550 Verneuil-En-Halatte (France); Delepine-Gilon, N. [Institut des Sciences Analytiques, 5 rue de la Doua, 69100 Villeurbanne (France); Dutouquet, C., E-mail: christophe.dutouquet@ineris.fr [Institut National de l' Environnement Industriel et des Risques (INERIS/DRC/CARA/NOVA), Parc Technologique Alata, BP 2, 60550 Verneuil-En-Halatte (France)

    2014-01-01

    Pollution of water is a matter of concern all over the earth. Particles are known to play an important role in the transportation of pollutants in this medium. In addition, the emergence of new materials such as NOAA (Nano-Objects, their Aggregates and their Agglomerates) emphasizes the need to develop adapted instruments for their detection. Surveillance of pollutants in particulate form in waste waters in industries involved in nanoparticle manufacturing and processing is a telling example of possible applications of such instrumental development. The LIBS (laser-induced breakdown spectroscopy) technique coupled with the liquid jet as sampling mode for suspensions was deemed as a potential candidate for on-line and real time monitoring. With the final aim in view to obtain the best detection limits, the interaction of nanosecond laser pulses with the liquid jet was examined. The evolution of the volume sampled by laser pulses was estimated as a function of the laser energy applying conditional analysis when analyzing a suspension of micrometric-sized particles of borosilicate glass. An estimation of the sampled depth was made. Along with the estimation of the sampled volume, the evolution of the SNR (signal to noise ratio) as a function of the laser energy was investigated as well. Eventually, the laser energy and the corresponding fluence optimizing both the sampling volume and the SNR were determined. The obtained results highlight intrinsic limitations of the liquid jet sampling mode when using 532 nm nanosecond laser pulses with suspensions. - Highlights: • Micrometric-sized particles in suspensions are analyzed using LIBS and a liquid jet. • The evolution of the sampling volume is estimated as a function of laser energy. • The sampling volume happens to saturate beyond a certain laser fluence. • Its value was found much lower than the beam diameter times the jet thickness. • Particles proved not to be entirely vaporized.

  12. Onboard calibration igneous targets for the Mars Science Laboratory Curiosity rover and the Chemistry Camera laser induced breakdown spectroscopy instrument

    Energy Technology Data Exchange (ETDEWEB)

    Fabre, C., E-mail: cecile.fabre@g2r.uhp-nancy.fr [G2R, Nancy Universite (France); Maurice, S.; Cousin, A. [IRAP, Toulouse (France); Wiens, R.C. [LANL, Los Alamos, NM (United States); Forni, O. [IRAP, Toulouse (France); Sautter, V. [MNHN, Paris (France); Guillaume, D. [GET, Toulouse (France)

    2011-03-15

    Accurate characterization of the Chemistry Camera (ChemCam) laser-induced breakdown spectroscopy (LIBS) on-board composition targets is of prime importance for the ChemCam instrument. The Mars Science Laboratory (MSL) science and operations teams expect ChemCam to provide the first compositional results at remote distances (1.5-7 m) during the in situ analyses of the Martian surface starting in 2012. Thus, establishing LIBS reference spectra from appropriate calibration standards must be undertaken diligently. Considering the global mineralogy of the Martian surface, and the possible landing sites, three specific compositions of igneous targets have been determined. Picritic, noritic, and shergottic glasses have been produced, along with a Macusanite natural glass. A sample of each target will fly on the MSL Curiosity rover deck, 1.56 m from the ChemCam instrument, and duplicates are available on the ground. Duplicates are considered to be identical, as the relative standard deviation (RSD) of the composition dispersion is around 8%. Electronic microprobe and laser ablation inductively coupled plasma mass spectrometry (LA ICP-MS) analyses give evidence that the chemical composition of the four silicate targets is very homogeneous at microscopic scales larger than the instrument spot size, with RSD < 5% for concentration variations > 0.1 wt.% using electronic microprobe, and < 10% for concentration variations > 0.01 wt.% using LA ICP-MS. The LIBS campaign on the igneous targets performed under flight-like Mars conditions establishes reference spectra for the entire mission. The LIBS spectra between 240 and 900 nm are extremely rich, hundreds of lines with high signal-to-noise, and a dynamical range sufficient to identify unambiguously major, minor and trace elements. For instance, a first LIBS calibration curve has been established for strontium from [Sr] = 284 ppm to [Sr] = 1480 ppm, showing the potential for the future calibrations for other major or minor

  13. Application of laser-induced breakdown spectroscopy (LIBS) as a tool to determine the origin of 'conflict minerals'

    Science.gov (United States)

    Hark, R. R.; Harmon, R. S.; Remus, J. J.; East, L. J.; Wise, M. A.; Tansi, B. M.; Shughrue, K. M.; Dunsin, K. S.; Liu, C.

    2012-04-01

    Laser-induced breakdown spectroscopy (LIBS) offers a means of rapidly distinguishing different places of origin for a mineral because the LIBS plasma emission spectrum provides the complete chemical composition (i.e. geochemical fingerprint) of a mineral in real-time. An application of this approach with potentially significant commercial and political importance is the spectral fingerprinting of the 'conflict minerals' columbite-tantalite ("coltan"). Following a successful pilot study of three columbite-tantalite suites from the United States and Canada, a more geographically diverse set of samples from 37 locations worldwide were analyzed using a commercial laboratory LIBS system and a subset of samples also analyzed using a prototype broadband field-portable system. The spectral range from 250-490 nm was chosen for the laboratory analysis to encompass many of the intense emission lines for the major elements (Ta, Nb, Fe, Mn) and the significant trace elements (e.g., W, Ti, Zr, Sn, U, Sb, Ca, Zn, Pb, Y, Mg, and Sc) known to commonly substitute in the columbite-tantalite solid solution series crystal structure and in the columbite group minerals. The field-portable instrument offered an increased spectral range (198-1005 nm), over which all elements have spectral emission lines, and higher resolution than the laboratory instrument. In both cases, the LIBS spectra were analyzed using advanced multivariate statistical signal processing techniques. Partial Least Squares Discriminant Analysis (PLSDA) resulted in a correct place-level geographic classification at success rates between 90 and 100%. The possible role of rare-earth elements (REE's) as a factor contributing to the high levels of sample discrimination was explored. Given the fact that it can be deployed as a man-portable analytical technology, these results lend additional evidence that LIBS has the potential to be utilized in the field as a real-time tool to discriminate between columbite-tantalite ores of

  14. Application of a spectrum standardization method for carbon analysis in coal using laser-induced breakdown spectroscopy (LIBS).

    Science.gov (United States)

    Li, Xiongwei; Wang, Zhe; Fu, Yangting; Li, Zheng; Liu, Jianmin; Ni, Weidou

    2014-01-01

    Measurement of coal carbon content using laser-induced breakdown spectroscopy (LIBS) is limited by its low precision and accuracy. A modified spectrum standardization method was proposed to achieve both reproducible and accurate results for the quantitative analysis of carbon content in coal using LIBS. The proposed method used the molecular emissions of diatomic carbon (C2) and cyanide (CN) to compensate for the diminution of atomic carbon emissions in high volatile content coal samples caused by matrix effect. The compensated carbon line intensities were further converted into an assumed standard state with standard plasma temperature, electron number density, and total number density of carbon, under which the carbon line intensity is proportional to its concentration in the coal samples. To obtain better compensation for fluctuations of total carbon number density, the segmental spectral area was used and an iterative algorithm was applied that is different from our previous spectrum standardization calculations. The modified spectrum standardization model was applied to the measurement of carbon content in 24 bituminous coal samples. The results demonstrate that the proposed method has superior performance over the generally applied normalization methods. The average relative standard deviation was 3.21%, the coefficient of determination was 0.90, the root mean square error of prediction was 2.24%, and the average maximum relative error for the modified model was 12.18%, showing an overall improvement over the corresponding values for the normalization with segmental spectrum area, 6.00%, 0.75, 3.77%, and 15.40%, respectively.

  15. Influence of particle size distribution on the analysis of pellets of plant materials by laser-induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Gustinelli Arantes de Carvalho, Gabriel [NAPTISA Research Support Center “Technology and Innovation for a Sustainable Agriculture”, Center for Nuclear Energy in Agriculture, University of São Paulo, Av. Centenário 303, 13416-000 Piracicaba, SP (Brazil); Santos Jr, Dário [Departamento de Ciências Exatas e da Terra, Universidade Federal de São Paulo, Rua Prof. Artur Riedel, 275, 09972-270 Diadema, SP (Brazil); Silva Gomes, Marcos da; Nunes, Lidiane Cristina; Guerra, Marcelo Braga Bueno [NAPTISA Research Support Center “Technology and Innovation for a Sustainable Agriculture”, Center for Nuclear Energy in Agriculture, University of São Paulo, Av. Centenário 303, 13416-000 Piracicaba, SP (Brazil); Krug, Francisco José, E-mail: fjkrug@cena.usp.br [NAPTISA Research Support Center “Technology and Innovation for a Sustainable Agriculture”, Center for Nuclear Energy in Agriculture, University of São Paulo, Av. Centenário 303, 13416-000 Piracicaba, SP (Brazil)

    2015-03-01

    Pellets of sieved plant materials (150, 106, 75, 53 and 20 μm sieve apertures) were prepared and analyzed by laser-induced breakdown spectroscopy (LIBS), and the results for Ca, K, Mg, P, B and Mn were discussed as a function of particle size distribution. This parameter is of key importance for appropriate test sample presentation in the form of pressed pellets for quantitative analysis by LIBS. Experiments were carried out with a Q-switched Nd:YAG laser at 1064 nm, and a spectrometer with Echelle optics and an intensified charge-coupled device. Results indicated that smaller particles yielded up to 50% emission signal intensities' enhancement and attained better measurements' precision (site-to-site variation). Moreover, matrix effects were reduced by analyzing pellets prepared from < 75 μm sieved fractions (mean particle size = 32 μm; d{sub 95} = 102 μm) and by using a 50 J cm{sup −2} laser fluence (220 mJ per pulse; 750 μm laser spot size). The preparation of pellets from laboratory samples with monomodal particle size distributions, where most particles were smaller than 100 μm, was decisive for improving analyte micro-homogeneity within the test samples and for attaining lower coefficients of variation of measurements, typically lower than 10% (n = 10 sites per pellet; 20 laser pulses per site). - Highlights: • First systematic study on the effects of particle size distribution. • Most appropriate particle sizes for pellet preparation depend on laser fluence. • Data can be used for sampling strategies aiming at LIBS analysis of plant materials.

  16. Miniaturized Laser-Induced Breakdown Spectroscopy for the in-situ analysis of the Martian surface: Calibration and quantification

    Energy Technology Data Exchange (ETDEWEB)

    Rauschenbach, I., E-mail: irausch@uni-muenster.d [Institut fuer Planetologie, Westfaelische Wilhelms-Universitaet, Wilhelm-Klemm-Strasse 10, 48149 Muenster (Germany); Jessberger, E.K. [Institut fuer Planetologie, Westfaelische Wilhelms-Universitaet, Wilhelm-Klemm-Strasse 10, 48149 Muenster (Germany); Pavlov, S.G. [Institute of Planetary Research, German Aerospace Center, Rutherfordstrasse 2, 12489 Berlin (Germany); Huebers, H.-W. [Institute of Planetary Research, German Aerospace Center, Rutherfordstrasse 2, 12489 Berlin (Germany); Institut fuer Optik und Atomare Physik, Technische Universitaet Berlin, Hardenbergstrasse 36, 10623 Berlin (Germany)

    2010-08-15

    We report on our ongoing studies to develop Laser-Induced Breakdown Spectroscopy (LIBS) for planetary surface missions to Mars and other planets and moons, like Jupiter's moon Europa or the Earth's moon. Since instruments for space missions are severely mass restricted, we are developing a light-weight miniaturized close-up LIBS instrument to be installed on a lander or rover for the in-situ geochemical analysis of planetary surface rocks and coarse fines. The total mass of the instrument will be {approx} 1 kg in flight configuration. Here we report on a systematic performance study of a LIBS instrument equipped with a prototype laser of 216 g total mass and an energy of 1.8 mJ. The LIBS measurements with the prototype laser and the comparative measurements with a regular 40 mJ laboratory laser were both performed under Martian atmospheric conditions. We calibrated 14 major and minor elements by analyzing 18 natural samples of certified composition. The calibration curves define the limits of detection that are > 5 ppm for the lab laser and > 400 ppm for the prototype laser, reflecting the different analyzed sample masses of {approx} 20 {mu}g and {approx} 2 {mu}g, respectively. To test the accuracy we compared the LIBS compositions, determined with both lasers, of Mars analogue rocks with certified or independently measured compositions and found agreements typically within 10-20%. In addition we verified that dust coverage is effectively removed from rock surfaces by the laser blast. Our study clearly demonstrates that a close-up LIBS instrument (spot size {approx} 50 {mu}m) will decisively enhance the scientific output of planetary lander missions by providing a very large number of microscopic elemental analyses.

  17. Sensitive detection of chlorine in iron oxide by single pulse and dual pulse laser-induced breakdown spectroscopy

    Science.gov (United States)

    Pedarnig, J. D.; Haslinger, M. J.; Bodea, M. A.; Huber, N.; Wolfmeir, H.; Heitz, J.

    2014-11-01

    The halogen chlorine is hard to detect in laser-induced breakdown spectroscopy (LIBS) mainly due to its high excited state energies of 9.2 and 10.4 eV for the most intense emission lines at 134.72 nm and 837.59 nm, respectively. We report on sensitive detection of Cl in industrial iron oxide Fe2O3 powder by single-pulse (SP) and dual-pulse (DP) LIBS measurements in the near infrared range in air. In compacted powder measured by SP excitation (Nd:YAG laser, 532 nm) Cl was detected with limit of detection LOD = 440 ppm and limit of quantitation LOQ = 720 ppm. Orthogonal DP LIBS was studied on pressed Fe2O3 pellets and Fe3O4 ceramics. The transmission of laser-induced plasma for orthogonal Nd:YAG 1064 nm and ArF 193 nm laser pulses showed a significant dependence on interpulse delay time (ipd) and laser wavelength (λL). The UV pulses (λL = 193 nm) were moderately absorbed in the plasma and the Cl I emission line intensity was enhanced while IR pulses (λL = 1064 nm) were not absorbed and Cl signals were not enhanced at ipd = 3 μs. The UV laser enhancement of Cl signals is attributed to the much higher signal/background ratio for orthogonal DP excitation compared to SP excitation and to the increased plasma temperature and electron number density. This enabled measurement at a very short delay time of td ≥ 0.1 μs with respect to the re-excitation pulse and detection of the very rapidly decaying Cl emission with higher efficiency.

  18. Development of a coal quality analyzer for application to power plants based on laser-induced breakdown spectroscopy

    Science.gov (United States)

    Zhang, Lei; Gong, Yao; Li, Yufang; Wang, Xin; Fan, Juanjuan; Dong, Lei; Ma, Weiguang; Yin, Wangbao; Jia, Suotang

    2015-11-01

    It is vitally important for a power plant to determine the coal property rapidly to optimize the combustion process. In this work, a fully software-controlled laser-induced breakdown spectroscopy (LIBS) based coal quality analyzer comprising a LIBS apparatus, a sampling equipment, and a control module, has been designed for possible application to power plants for offering rapid and precise coal quality analysis results. A closed-loop feedback pulsed laser energy stabilization technology is proposed to stabilize the Nd: YAG laser output energy to a preset interval by using the detected laser energy signal so as to enhance the measurement stability and applied in a month-long monitoring experiment. The results show that the laser energy stability has been greatly reduced from ± 5.2% to ± 1.3%. In order to indicate the complex relationship between the concentrations of the analyte of interest and the corresponding plasma spectra, the support vector regression (SVR) is employed as a non-linear regression method. It is shown that this SVR method combined with principal component analysis (PCA) enables a significant improvement in cross-validation accuracy by using the calibration set of coal samples. The root mean square error for prediction of ash content, volatile matter content, and calorific value decreases from 2.74% to 1.82%, 1.69% to 1.22%, and 1.23 MJ/kg to 0.85 MJ/kg, respectively. Meanwhile, the corresponding average relative error of the predicted samples is reduced from 8.3% to 5.48%, 5.83% to 4.42%, and 5.4% to 3.68%, respectively. The enhanced levels of accuracy obtained with the SVR combined with PCA based calibration models open up avenues for prospective prediction in coal properties.

  19. Quantitative carbon analysis in coal by combining data processing and spatial confinement in laser-induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Li, Xiongwei [State Key Lab of Power Systems, Department of Thermal Engineering, Tsinghua-BP Clean Energy Center, Tsinghua University, Beijing (China); Guodian New Energy Technology Research Institute, Beijing (China); Yin, Hualiang [State Key Lab of Power Systems, Department of Thermal Engineering, Tsinghua-BP Clean Energy Center, Tsinghua University, Beijing (China); Wang, Zhe, E-mail: zhewang@tsinghua.edu.cn [State Key Lab of Power Systems, Department of Thermal Engineering, Tsinghua-BP Clean Energy Center, Tsinghua University, Beijing (China); Fu, Yangting; Li, Zheng; Ni, Weidou [State Key Lab of Power Systems, Department of Thermal Engineering, Tsinghua-BP Clean Energy Center, Tsinghua University, Beijing (China)

    2015-09-01

    Online measurement of carbon content of coal is important for coal-fired power plants to realize the combustion optimization of coal-fired boilers. Given that the measurement of carbon content of coal using laser-induced breakdown spectroscopy (LIBS) suffers from low measurement accuracy because of matrix effects, our previous study has proposed a combination model to improve the measurement accuracy of carbon content of coal. The spatial confinement method, which utilizes the spectral emissions of laser-induced plasmas spatially confined by cavities for quantitative analysis, has potential to improve quantitative analysis performance. In the present study, the combination model was used for coal measurement with cylindrical cavity confinement to further improve the measurement accuracy of carbon content of coal. Results showed that measurement accuracy was improved when the combination model was used with spatial confinement method. The coefficient of determination, root-mean-square error of prediction, average relative error, and average absolute error for the combination model with cylindrical cavity confinement were 0.99, 1.35%, 1.66%, and 1.08%, respectively, whereas values for the combination model without cylindrical cavity confinement were 0.99, 1.63%, 1.82%, and 1.27%, respectively. This is the first time that the average absolute error of carbon measurement for coal analysis has achieved close to 1.0% using LIBS, which is the critical requirement set for traditional chemical processing method by Chinese national standard. These results indicated that LIBS had significant application potential for coal analysis. - Highlights: • Spatial confinement method is applied for the measurement of carbon content in coal. • Previously proposed combination model is used with spatial confinement method. • The final result is firstly close to the critical reproducibility requirement of Chinese national standard.

  20. A partial least squares based spectrum normalization method for uncertainty reduction for laser-induced breakdown spectroscopy measurements

    Energy Technology Data Exchange (ETDEWEB)

    Li, Xiongwei [State Key Lab of Power Systems, Department of Thermal Engineering, Tsinghua-BP Clean Energy Center, Tsinghua University, Beijing (China); Wang, Zhe, E-mail: zhewang@tsinghua.edu.cn [State Key Lab of Power Systems, Department of Thermal Engineering, Tsinghua-BP Clean Energy Center, Tsinghua University, Beijing (China); Lui, Siu-Lung; Fu, Yangting; Li, Zheng [State Key Lab of Power Systems, Department of Thermal Engineering, Tsinghua-BP Clean Energy Center, Tsinghua University, Beijing (China); Liu, Jianming [China Guodian Science and Technology Research Institute, Nanjing 100034 (China); Ni, Weidou [State Key Lab of Power Systems, Department of Thermal Engineering, Tsinghua-BP Clean Energy Center, Tsinghua University, Beijing (China)

    2013-10-01

    A bottleneck of the wide commercial application of laser-induced breakdown spectroscopy (LIBS) technology is its relatively high measurement uncertainty. A partial least squares (PLS) based normalization method was proposed to improve pulse-to-pulse measurement precision for LIBS based on our previous spectrum standardization method. The proposed model utilized multi-line spectral information of the measured element and characterized the signal fluctuations due to the variation of plasma characteristic parameters (plasma temperature, electron number density, and total number density) for signal uncertainty reduction. The model was validated by the application of copper concentration prediction in 29 brass alloy samples. The results demonstrated an improvement on both measurement precision and accuracy over the generally applied normalization as well as our previously proposed simplified spectrum standardization method. The average relative standard deviation (RSD), average of the standard error (error bar), the coefficient of determination (R{sup 2}), the root-mean-square error of prediction (RMSEP), and average value of the maximum relative error (MRE) were 1.80%, 0.23%, 0.992, 1.30%, and 5.23%, respectively, while those for the generally applied spectral area normalization were 3.72%, 0.71%, 0.973, 1.98%, and 14.92%, respectively. - Highlights: • Multiple pairs of lines are used to compensate plasma temperature fluctuations. • Multi-line information is utilized to represent the elemental concentration. • Advantage of PLS algorithm is exploited by the model. • Both of uncertainty reduction and accuracy improvement are achieved.

  1. Development of laser-induced breakdown spectroscopy sensor to assess groundwater quality impacts resulting from geologic carbon sequestration

    Science.gov (United States)

    Carson, Cantwell G.; Goueguel, Christian; Jain, Jinesh; McIntyre, Dustin

    2015-05-01

    The injection of CO2 into deep aquifers can potentially affect the quality of groundwater supplies were leakage to occur from the injection formation or fluids. Therefore, the detection of CO2 and/or entrained contaminants that migrate into shallow groundwater aquifers is important both to assess storage permanence and to evaluate impacts on water resources. Naturally occurring elements (i.e., Li, Sr) in conjunction with isotope ratios can be used to detect such leakage. We propose the use of laser induced breakdown spectroscopy (LIBS) as an analytical technique to detect a suite of elements in water samples. LIBS has real time monitoring capabilities and can be applied for elemental and isotopic analysis of solid, liquid, and gas samples. The flexibility of probe design and use of fiber optics make it a suitable technique for real time measurements in harsh conditions and in hard to reach places. The laboratory scale experiments to measure Li, K, Ca, and Sr composition of water samples indicate that the technique produces rapid and reliable data. Since CO2 leakage from saline aquifers may accompany a brine solution, we studied the effect of sodium salts on the accuracy of LIBS analysis. This work specifically also details the fabrication and application of a miniature ruggedized remotely operated diode pumped solid state passively Q-switched laser system for use as the plasma excitation source for a real time LIBS analysis. This work also proposes the optical distribution of many laser spark sources across a wide area for widespread leak detection and basin monitoring.

  2. Determination of Cr in water solution by laser-induced breakdown spectroscopy with different univariate calibration models

    Science.gov (United States)

    Huang, Lin; Yao, Mingyin; Xu, Yuan; Liu, Muhua

    2013-04-01

    In order to prove the feasibility of laser-induced breakdown spectroscopy (LIBS) in measuring toxic metals Cr in water solution, a series of potassium bichromate standard solutions were prepared in the lab. The characteristic line intensity of Cromium (Cr) element at 357.87, 359.35, 360.53, 425.43, 427.48, and 428.97 nm was taken to build up the correlation with concentration. The indexes of relative standard deviation, intercept, slope, R 2 (coefficient of determination), and root mean square error of calibration were selected to verify the precision and accuracy of models. The comprehensive results showed that the 425.43 nm line had better superiority than other lines. And the detection limit of 6 ug/ml and repeatability of 3 % are reported. To improve the model accuracy further, the intensity ratio of single 425.43 nm line to the whole spectrum was extracted. And a linear relationship between the intensity ratio and the element Cr concentration was constructed. The results demonstrated the intensity ratio calibration had better accuracy than single line calibration, especially after smoothing. To verify the accuracy of prediction, the 100 ug/ml concentration sample was used as prediction sample. The relative error values are 13.2, 11.7, and 10.8 % for single line calibration, intensity ratio calibration with raw data, and by use of smooth processing data, respectively. The results further indicated that the intensity ratio calibration improved the accuracy of measurement than single line calibration. It is worth mentioning that the application of LIBS aiming the direct analysis of heavy metals in water is a great challenge that still needs efforts for its development and validation.

  3. Rapid at-line analysis of coating thickness and uniformity on tablets using laser induced breakdown spectroscopy.

    Science.gov (United States)

    Mowery, Mark D; Sing, Robert; Kirsch, John; Razaghi, Amir; Béchard, Simon; Reed, Robert A

    2002-06-01

    Because of the functionality of controlled release tablet coatings, it is desirable to have a rapid means of optimizing coating conditions and predicting the performance of a batch at-line, prior to exhaustive lab analysis. In this paper, Laser Induced Breakdown Spectroscopy (LIBS) was utilized for the first time as a rapid means of simultaneously determining the thickness and uniformity of an enteric coating on compressed tablets. In these studies, the core tablets contained a high concentration of calcium, and the coating contained titanium, silicon, and magnesium, all of which are excellent analytical targets for LIBS. The emission spectra of all four elements were simultaneously monitored as a function of the number of laser pulses in the same spatial location, literally drilling through the coating and into the core tablet. The depth penetration of individual laser pulses was calibrated using profilometry, and the thickness of the coating was determined by the incidence of calcium signal and simultaneous decrease in emission from the other probe elements (titanium, silicon and magnesium) as the laser penetrated the coating. Coating thickness measurements were evaluated by sampling coatings ranging from 5 to 21% (100 mg tablet weight basis). Additionally, LIBS spatial resolution capabilities were exploited to evaluate the film coat thickness uniformity across the tablet faces and edges. Furthermore, tablet to tablet uniformity differences were readily assessable. The results indicate that a change in coating application of less than 2 wt.% on a 100 mg tablet can be easily detected. The rapid analysis times for this technique (10 tablets were analyzed in under 15 min) makes it applicable for in-process evaluation of coating thickness, as well as intra- and inter-tablet coating uniformity on compressed tablets.

  4. Analysis of natural and artificial ultramarine blue pigments using laser induced breakdown and pulsed Raman spectroscopy, statistical analysis and light microscopy

    Science.gov (United States)

    Osticioli, I.; Mendes, N. F. C.; Nevin, A.; Gil, Francisco P. S. C.; Becucci, M.; Castellucci, E.

    2009-08-01

    Pulsed laser induced breakdown spectroscopy (LIBS) and Raman spectroscopy were performed using a novel laboratory setup employing the same Nd:YAG laser emission at 532 nm for the analysis of five commercially available pigments collectively known as "ultramarine blue", a sodium silicate material of either mineral origin or an artificially produced glass. LIBS and Raman spectroscopy have provided information regarding the elemental and molecular composition of the samples; additionally, an analytical protocol for the differentiation between natural (lapis lazuli) and artificial ultramarine blue pigments is proposed. In particular LIBS analysis has allowed the discrimination between pigments on the basis of peaks ascribed to calcium. The presence of calcite in the natural blue pigments has been confirmed following Raman spectroscopy in specific areas of the samples, and micro-Raman and optical microscopy have further corroborated the presence of calcite inclusions in the samples of natural origin. Finally multivariate analysis of Laser induced breakdown spectra using principal component analysis (PCA) further enhanced the differentiation between natural and artificial ultramarine blue pigments.

  5. Analysis of natural and artificial ultramarine blue pigments using laser induced breakdown and pulsed Raman spectroscopy, statistical analysis and light microscopy.

    Science.gov (United States)

    Osticioli, I; Mendes, N F C; Nevin, A; Gil, Francisco P S C; Becucci, M; Castellucci, E

    2009-08-01

    Pulsed laser induced breakdown spectroscopy (LIBS) and Raman spectroscopy were performed using a novel laboratory setup employing the same Nd:YAG laser emission at 532 nm for the analysis of five commercially available pigments collectively known as "ultramarine blue", a sodium silicate material of either mineral origin or an artificially produced glass. LIBS and Raman spectroscopy have provided information regarding the elemental and molecular composition of the samples; additionally, an analytical protocol for the differentiation between natural (lapis lazuli) and artificial ultramarine blue pigments is proposed. In particular LIBS analysis has allowed the discrimination between pigments on the basis of peaks ascribed to calcium. The presence of calcite in the natural blue pigments has been confirmed following Raman spectroscopy in specific areas of the samples, and micro-Raman and optical microscopy have further corroborated the presence of calcite inclusions in the samples of natural origin. Finally multivariate analysis of Laser induced breakdown spectra using principal component analysis (PCA) further enhanced the differentiation between natural and artificial ultramarine blue pigments.

  6. On the use of Raman spectroscopy and instrumented indentation for characterizing damage in machined carbide ceramics

    Science.gov (United States)

    Groth, Benjamin Peter

    Machining is a necessary post-processing step in the manufacturing of many ceramic materials. Parts are machined to meet specific dimensions, with tight tolerances, not attainable from forming alone, as well as to achieve a desired surface finish. However, the machining process is very harsh, often employing the use of high temperatures and pressures to achieve the wanted result. In the case of silicon carbide, a material with extremely high hardness and stiffness, machining is very difficult and requires machining conditions that are highly aggressive. This can leave behind residual stresses in the surface of the material, cause unwanted phase transformations, and produce sub-surface deformation that can lead to failure. This thesis seeks to determine the effect of various machining conditions on the Raman spectra and elastic properties of sintered silicon carbide materials. Sample sets examined included hot-pressed silicon carbide tiles with four different surface finishes, as well as "ideal" single crystal silicon carbide wafers. The surface finishes studied were as follows: an as-pressed finish; a grit blast finish; a harsh rotary ground finish; and a mirror polish. Each finish imparts a different amount, as well as type, of deformation to the sample and are each utilized for a specific application. The sample surfaces were evaluated using a combination of Raman spectroscopy, for phase identification and stress analysis, and nanoindentation, for obtaining elastic properties and imparting uniform controlled deformation to the samples. Raman spectroscopy was performed over each sample surface using 514- and 633-nm wavelength excitation, along with confocal and non-confocal settings to study depth variation. Surfaces stresses were determined using peak shift information extracted from Raman spectra maps, while other spectral variations were used to compare levels of machining damage. Elastic modulus, hardness, and plastic work of indentation maps were generated

  7. Rapid and Portable Methods for Identification of Bacterially Influenced Calcite: Application of Laser-Induced Breakdown Spectroscopy and AOTF Reflectance Spectroscopy, Fort Stanton Cave, New Mexico

    Science.gov (United States)

    McMillan, N. J.; Chavez, A.; Chanover, N.; Voelz, D.; Uckert, K.; Tawalbeh, R.; Gariano, J.; Dragulin, I.; Xiao, X.; Hull, R.

    2014-12-01

    Rapid, in-situ methods for identification of biologic and non-biologic mineral precipitation sites permit mapping of biological hot spots. Two portable spectrometers, Laser-Induced Breakdown Spectroscopy (LIBS) and Acoustic-Optic Tunable Filter Reflectance Spectroscopy (AOTFRS) were used to differentiate between bacterially influenced and inorganically precipitated calcite specimens from Fort Stanton Cave, NM, USA. LIBS collects light emitted from the decay of excited electrons in a laser ablation plasma; the spectrum is a chemical fingerprint of the analyte. AOTFRS collects light reflected from the surface of a specimen and provides structural information about the material (i.e., the presence of O-H bonds). These orthogonal data sets provide a rigorous method to determine the origin of calcite in cave deposits. This study used a set of 48 calcite samples collected from Fort Stanton cave. Samples were examined in SEM for the presence of biologic markers; these data were used to separate the samples into biologic and non-biologic groups. Spectra were modeled using the multivariate technique Partial Least Squares Regression (PLSR). Half of the spectra were used to train a PLSR model, in which biologic samples were assigned to the independent variable "0" and non-biologic samples were assigned the variable "1". Values of the independent variable were calculated for each of the training samples, which were close to 0 for the biologic samples (-0.09 - 0.23) and close to 1 for the non-biologic samples (0.57 - 1.14). A Value of Apparent Distinction (VAD) of 0.55 was used to numerically distinguish between the two groups; any sample with an independent variable value 0.55 was determined to be non-biologic in origin. After the model was trained, independent variable values for the remaining half of the samples were calculated. Biologic or non-biologic origin was assigned by comparison to the VAD. Using LIBS data alone, the model has a 92% success rate, correctly

  8. Review of Brain-Machine Interfaces Used in Neural Prosthetics with New Perspective on Somatosensory Feedback through Method of Signal Breakdown.

    Science.gov (United States)

    Vidal, Gabriel W Vattendahl; Rynes, Mathew L; Kelliher, Zachary; Goodwin, Shikha Jain

    2016-01-01

    The brain-machine interface (BMI) used in neural prosthetics involves recording signals from neuron populations, decoding those signals using mathematical modeling algorithms, and translating the intended action into physical limb movement. Recently, somatosensory feedback has become the focus of many research groups given its ability in increased neural control by the patient and to provide a more natural sensation for the prosthetics. This process involves recording data from force sensitive locations on the prosthetics and encoding these signals to be sent to the brain in the form of electrical stimulation. Tactile sensation has been achieved through peripheral nerve stimulation and direct stimulation of the somatosensory cortex using intracortical microstimulation (ICMS). The initial focus of this paper is to review these principles and link them to modern day applications such as restoring limb use to those who lack such control. With regard to how far the research has come, a new perspective for the signal breakdown concludes the paper, offering ideas for more real somatosensory feedback using ICMS to stimulate particular sensations by differentiating touch sensors and filtering data based on unique frequencies.

  9. Applications of ultra-short pulsed laser ablation: thin films deposition and fs/ns dual-pulse laser-induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Teghil, R; De Bonis, A; Galasso, A [Dipartimento di Chimica, Universita della Basilicata, Via N. Sauro 85, 85100 Potenza (Italy); Santagata, A; Albano, G; Villani, P; Spera, D; Parisi, G P [CNR-IMIP, Unita di Potenza, Via S. Loja, 85050 Tito Scalo (Italy)], E-mail: roberto.teghil@unibas.it

    2008-10-15

    In this paper, we report a survey of two of the large number of possible practical applications of the laser ablation performed by an ultra-short pulse laser, namely pulsed laser deposition (PLD) and fs/ns dual-pulse laser-induced breakdown spectroscopy (DP-LIBS). These applications differ from those using just longer pulsed lasers as a consequence of the distinctive characteristics of the plasma produced by ultra-short laser beams. The most important feature of this plasma is the large presence of particles with nanometric size which plays a fundamental role in both applications.

  10. Detection of rare earth elements in Powder River Basin sub-bituminous coal ash using laser-induced breakdown spectroscopy (LIBS)

    Energy Technology Data Exchange (ETDEWEB)

    Tran, Phuoc [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United State; Mcintyre, Dustin [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United State

    2015-10-01

    We reported our preliminary results on the use of laser-induced breakdown spectroscopy to analyze the rare earth elements contained in ash samples from Powder River Basin sub-bituminous coal (PRB-coal). We have identified many elements in the lanthanide series (cerium, europium, holmium, lanthanum, lutetium, praseodymium, promethium, samarium, terbium, ytterbium) and some elements in the actinide series (actinium, thorium, uranium, plutonium, berkelium, californium) in the ash samples. In addition, various metals were also seen to present in the ash samples

  11. Mapping of lead, magnesium and copper accumulation in plant tissues by laser-induced breakdown spectroscopy and laser-ablation inductively coupled plasma mass spectrometry

    Science.gov (United States)

    Kaiser, J.; Galiová, M.; Novotný, K.; Červenka, R.; Reale, L.; Novotný, J.; Liška, M.; Samek, O.; Kanický, V.; Hrdlička, A.; Stejskal, K.; Adam, V.; Kizek, R.

    2009-01-01

    Laser-Induced Breakdown Spectroscopy (LIBS) and Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS) were utilized for mapping the accumulation of Pb, Mg and Cu with a resolution up to 200 μm in a up to cm × cm area of sunflower ( Helianthus annuus L.) leaves. The results obtained by LIBS and LA-ICP-MS are compared with the outcomes from Atomic Absorption Spectrometry (AAS) and Thin-Layer Chromatography (TLC). It is shown that laser-ablation based analytical methods can substitute or supplement these techniques mainly in the cases when a fast multi-elemental mapping of a large sample area is needed.

  12. Mapping of lead, magnesium and copper accumulation in plant tissues by laser-induced breakdown spectroscopy and laser-ablation inductively coupled plasma mass spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Kaiser, J. [Institute of Physical Engineering, Faculty of Mechanical Engineering, Brno University of Technology, Technicka 2896/2, 616 69 Brno (Czech Republic)], E-mail: kaiser@fme.vutbr.cz; Galiova, M.; Novotny, K.; Cervenka, R. [Department of Chemistry, Faculty of Science, Masaryk University, Kotlarska 2, 611 37 Brno (Czech Republic); Reale, L. [Faculty of Sciences, University of L' Aquila, Via Vetoio (Coppito 1), 67010 L' Aquila (Italy); Novotny, J.; Liska, M.; Samek, O. [Institute of Physical Engineering, Faculty of Mechanical Engineering, Brno University of Technology, Technicka 2896/2, 616 69 Brno (Czech Republic); Kanicky, V.; Hrdlicka, A. [Department of Chemistry, Faculty of Science, Masaryk University, Kotlarska 2, 611 37 Brno (Czech Republic); Stejskal, K.; Adam, V.; Kizek, R. [Department of Chemistry and Biochemistry, Faculty of Agronomy, Mendel University of Agriculture and Forestry, Zemedelska 1, 613 00 Brno (Czech Republic)

    2009-01-15

    Laser-Induced Breakdown Spectroscopy (LIBS) and Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS) were utilized for mapping the accumulation of Pb, Mg and Cu with a resolution up to 200 {mu}m in a up to cm x cm area of sunflower (Helianthus annuus L.) leaves. The results obtained by LIBS and LA-ICP-MS are compared with the outcomes from Atomic Absorption Spectrometry (AAS) and Thin-Layer Chromatography (TLC). It is shown that laser-ablation based analytical methods can substitute or supplement these techniques mainly in the cases when a fast multi-elemental mapping of a large sample area is needed.

  13. Machine learning methods for the classification of gliomas: Initial results using features extracted from MR spectroscopy.

    Science.gov (United States)

    Ranjith, G; Parvathy, R; Vikas, V; Chandrasekharan, Kesavadas; Nair, Suresh

    2015-04-01

    With the advent of new imaging modalities, radiologists are faced with handling increasing volumes of data for diagnosis and treatment planning. The use of automated and intelligent systems is becoming essential in such a scenario. Machine learning, a branch of artificial intelligence, is increasingly being used in medical image analysis applications such as image segmentation, registration and computer-aided diagnosis and detection. Histopathological analysis is currently the gold standard for classification of brain tumors. The use of machine learning algorithms along with extraction of relevant features from magnetic resonance imaging (MRI) holds promise of replacing conventional invasive methods of tumor classification. The aim of the study is to classify gliomas into benign and malignant types using MRI data. Retrospective data from 28 patients who were diagnosed with glioma were used for the analysis. WHO Grade II (low-grade astrocytoma) was classified as benign while Grade III (anaplastic astrocytoma) and Grade IV (glioblastoma multiforme) were classified as malignant. Features were extracted from MR spectroscopy. The classification was done using four machine learning algorithms: multilayer perceptrons, support vector machine, random forest and locally weighted learning. Three of the four machine learning algorithms gave an area under ROC curve in excess of 0.80. Random forest gave the best performance in terms of AUC (0.911) while sensitivity was best for locally weighted learning (86.1%). The performance of different machine learning algorithms in the classification of gliomas is promising. An even better performance may be expected by integrating features extracted from other MR sequences. © The Author(s) 2015 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

  14. Enhancement of laser-induced breakdown spectroscopy (LIBS) Detection limit using a low-pressure and short-pulse laser-induced plasma process.

    Science.gov (United States)

    Wang, Zhen Zhen; Deguchi, Yoshihiro; Kuwahara, Masakazu; Yan, Jun Jie; Liu, Ji Ping

    2013-11-01

    Laser-induced breakdown spectroscopy (LIBS) technology is an appealing technique compared with many other types of elemental analysis because of the fast response, high sensitivity, real-time, and noncontact features. One of the challenging targets of LIBS is the enhancement of the detection limit. In this study, the detection limit of gas-phase LIBS analysis has been improved by controlling the pressure and laser pulse width. In order to verify this method, low-pressure gas plasma was induced using nanosecond and picosecond lasers. The method was applied to the detection of Hg. The emission intensity ratio of the Hg atom to NO (IHg/INO) was analyzed to evaluate the LIBS detection limit because the NO emission (interference signal) was formed during the plasma generation and cooling process of N2 and O2 in the air. It was demonstrated that the enhancement of IHg/INO arose by decreasing the pressure to a few kilopascals, and the IHg/INO of the picosecond breakdown was always much higher than that of the nanosecond breakdown at low buffer gas pressure. Enhancement of IHg/INO increased more than 10 times at 700 Pa using picosecond laser with 35 ps pulse width. The detection limit was enhanced to 0.03 ppm (parts per million). We also saw that the spectra from the center and edge parts of plasma showed different features. Comparing the central spectra with the edge spectra, IHg/INO of the edge spectra was higher than that of the central spectra using the picosecond laser breakdown process.

  15. Analysis of dengue infection based on Raman spectroscopy and support vector machine (SVM).

    Science.gov (United States)

    Khan, Saranjam; Ullah, Rahat; Khan, Asifullah; Wahab, Noorul; Bilal, Muhammad; Ahmed, Mushtaq

    2016-06-01

    The current study presents the use of Raman spectroscopy combined with support vector machine (SVM) for the classification of dengue suspected human blood sera. Raman spectra for 84 clinically dengue suspected patients acquired from Holy Family Hospital, Rawalpindi, Pakistan, have been used in this study.The spectral differences between dengue positive and normal sera have been exploited by using effective machine learning techniques. In this regard, SVM models built on the basis of three different kernel functions including Gaussian radial basis function (RBF), polynomial function and linear functionhave been employed to classify the human blood sera based on features obtained from Raman Spectra.The classification model have been evaluated with the 10-fold cross validation method. In the present study, the best performance has been achieved for the polynomial kernel of order 1. A diagnostic accuracy of about 85% with the precision of 90%, sensitivity of 73% and specificity of 93% has been achieved under these conditions.

  16. Investigation of the Matrix Effect on the Accuracy of Quantitative Analysis of Trace Metals in Liquids Using Laser-Induced Breakdown Spectroscopy with Solid Substrates.

    Science.gov (United States)

    Xiu, Junshan; Dong, Lili; Qin, Hua; Liu, Yunyan; Yu, Jin

    2016-12-01

    The detection limit of trace metals in liquids has been improved greatly by laser-induced breakdown spectroscopy (LIBS) using solid substrate. A paper substrate and a metallic substrate were used as a solid substrate for the detection of trace metals in aqueous solutions and viscous liquids (lubricating oils) respectively. The matrix effect on quantitative analysis of trace metals in two types of liquids was investigated. For trace metals in aqueous solutions using paper substrate, the calibration curves established for pure solutions and mixed solutions samples presented large variation on both the slope and the intercept for the Cu, Cd, and Cr. The matrix effects among the different elements in mixed solutions were observed. However, good agreement was obtained between the measured and known values in real wastewater. For trace metals in lubricating oils, the matrix effect between the different oils is relatively small and reasonably negligible under the conditions of our experiment. A universal calibration curve can be established for trace metals in different types of oils. The two approaches are verified that it is possible to develop a feasible and sensitive method with accuracy results for rapid detection of trace metals in industrial wastewater and viscous liquids by laser-induced breakdown spectroscopy. © The Author(s) 2016.

  17. Evaluation of Optical Depths and Self-Absorption of Strontium and Aluminum Emission Lines in Laser-Induced Breakdown Spectroscopy (LIBS).

    Science.gov (United States)

    Alfarraj, Bader A; Bhatt, Chet R; Yueh, Fang Yu; Singh, Jagdish P

    2017-04-01

    Laser-induced breakdown spectroscopy (LIBS) is a widely used laser spectroscopic technique in various fields, such as material science, forensic science, biological science, and the chemical and pharmaceutical industries. In most LIBS work, the analysis is performed using radiative transitions from atomic emissions. In this study, the plasma temperature and the product [Formula: see text] (the number density N and the absorption path length [Formula: see text]) were determined to evaluate the optical depths and the self-absorption of Sr and Al lines. A binary mixture of strontium nitrate and aluminum oxide was used as a sample, consisting of variety of different concentrations in powder form. Laser-induced breakdown spectroscopy spectra were collected by varying various parameters, such as laser energy, gate delay time, and gate width time to optimize the LIBS signals. Atomic emission from Sr and Al lines, as observed in the LIBS spectra of different sample compositions, was used to characterize the laser induced plasma and evaluate the optical depths and self-absorption of LIBS.

  18. Relative Determination of Micronutrients of Different Species of Teff (Eragrestis Seeds of Ethiopia Origin by Calibration Free Laser Induced Breakdown Spectroscopy Techniques

    Directory of Open Access Journals (Sweden)

    M. Dilbetigle Assefa

    2013-03-01

    Full Text Available The laser-induced breakdown spectroscopy techniques has been used to analysis the multi-component of three different species of Teff seeds (Red, White and Sirgegna of Ethiopia origin using a second harmonic (532 nm of a nanosecond Q-switched Nd: YAG laser focused on the surface of the pelletized powder of Teff seeds. Based on the idea of the plasma is homogeneous. The seven essential micronutrients in three species of Teff seeds are identified carbon as a matrix element. Electron density and plasma temperature are calculated applying Saha-Boltzmann equation and Boltzmann plot method. And making use of the semi-quantitative method the three species relative concentrations of (Ca, Mg, Al, Si, Mn, Fe and K are obtained using Calibration Free Laser Induced Breakdown Spectroscopy (CF-LIBS technique. The result demonstrated that the relative concentrations of the some elements in the species are different. In Red Teff species Ca is more, but Mg is least. On the contrary Mg is high in Sirgegna and White Teff as compared to Red Teff And High content of Calcium, Magnesium and Iron micronutrients are found in the three species.

  19. Detection of citrus canker and Huanglongbing using fluorescence imaging spectroscopy and support vector machine technique.

    Science.gov (United States)

    Wetterich, Caio Bruno; Felipe de Oliveira Neves, Ruan; Belasque, José; Marcassa, Luis Gustavo

    2016-01-10

    Citrus canker and Huanglongbing (HLB) are citrus diseases that represent a serious threat to the citrus production worldwide and may cause large economic losses. In this work, we combined fluorescence imaging spectroscopy (FIS) and a machine learning technique to discriminate between these diseases and other ordinary citrus conditions that may be present at citrus orchards, such as citrus scab and zinc deficiency. Our classification results are highly accurate when discriminating citrus canker from citrus scab (97.8%), and HLB from zinc deficiency (95%). These results show that it is possible to accurately identify citrus diseases that present similar symptoms.

  20. Elemental analysis by surface-enhanced Laser-Induced Breakdown Spectroscopy combined with liquid–liquid microextraction

    OpenAIRE

    Aguirre Pastor, Miguel Ángel; Legnaioli, Stefano; Almodóvar, F.; Hidalgo Núñez, Montserrat; Palleschi, Vincenzo; Canals Hernández, Antonio

    2013-01-01

    In this work, the possibility of using Laser-Induced Breakdown Spectrometry (LIBS) combined with liquid–liquid microextraction techniques is evaluated as a simple and fast method for trace elemental analysis. Two different strategies for LIBS analysis of manganese contained in microdroplets of extraction solvent (Triton X-114) are studied: (i) analysis by direct laser irradiation of microdroplets; and (ii) analysis by laser irradiation of microdroplets dried on metallic substrates (surface-en...

  1. A brief history of laser-induced breakdown spectroscopy: From the concept of atoms to LIBS 2012

    Energy Technology Data Exchange (ETDEWEB)

    Radziemski, Leon, E-mail: ljrbwr@comcast.net [Tucson, AZ (United States); Cremers, David [Applied Research Associates Inc., Albuquerque, NM (United States)

    2013-09-01

    LIBS did not appear de novo in 1962, but was built upon accomplishments of the past. These started with very old concepts of indivisible units (atomos), chemical and physical experiments and theoretical advances that took place in the late 19th and early 20th centuries, the development of the laser, the discovery of gas breakdown, and the realization of the application to spectrochemistry. We sketch the historical developments and focus as well on the advances in LIBS methodology and instrumentation over the past 50 years, culminating with a synopsis of the LIBS 2012 Conference in Luxor, Egypt.

  2. Non-adiabatic effects in thermochemistry, spectroscopy and kinetics: the general importance of all three Born-Oppenheimer breakdown corrections.

    Science.gov (United States)

    Reimers, Jeffrey R; McKemmish, Laura K; McKenzie, Ross H; Hush, Noel S

    2015-10-14

    Using a simple model Hamiltonian, the three correction terms for Born-Oppenheimer (BO) breakdown, the adiabatic diagonal correction (DC), the first-derivative momentum non-adiabatic correction (FD), and the second-derivative kinetic-energy non-adiabatic correction (SD), are shown to all contribute to thermodynamic and spectroscopic properties as well as to thermal non-diabatic chemical reaction rates. While DC often accounts for >80% of thermodynamic and spectroscopic property changes, the commonly used practice of including only the FD correction in kinetics calculations is rarely found to be adequate. For electron-transfer reactions not in the inverted region, the common physical picture that diabatic processes occur because of surface hopping at the transition state is proven inadequate as the DC acts first to block access, increasing the transition state energy by (ℏω)(2)λ/16J(2) (where λ is the reorganization energy, J the electronic coupling and ω the vibration frequency). However, the rate constant in the weakly-coupled Golden-Rule limit is identified as being only inversely proportional to this change rather than exponentially damped, owing to the effects of tunneling and surface hopping. Such weakly-coupled long-range electron-transfer processes should therefore not be described as "non-adiabatic" processes as they are easily described by Born-Huang ground-state adiabatic surfaces made by adding the DC to the BO surfaces; instead, they should be called just "non-Born-Oppenheimer" processes. The model system studied consists of two diabatic harmonic potential-energy surfaces coupled linearly through a single vibration, the "two-site Holstein model". Analytical expressions are derived for the BO breakdown terms, and the model is solved over a large parameter space focusing on both the lowest-energy spectroscopic transitions and the quantum dynamics of coherent-state wavepackets. BO breakdown is investigated pertinent to: ammonia inversion, aromaticity

  3. Singular value decomposition approach to the yttrium occurrence in mineral maps of rare earth element ores using laser-induced breakdown spectroscopy

    Science.gov (United States)

    Romppanen, Sari; Häkkänen, Heikki; Kaski, Saara

    2017-08-01

    Laser-induced breakdown spectroscopy (LIBS) has been used in analysis of rare earth element (REE) ores from the geological formation of Norra Kärr Alkaline Complex in southern Sweden. Yttrium has been detected in eudialyte (Na15 Ca6(Fe,Mn)3 Zr3Si(Si25O73)(O,OH,H2O)3 (OH,Cl)2) and catapleiite (Ca/Na2ZrSi3O9·2H2O). Singular value decomposition (SVD) has been employed in classification of the minerals in the rock samples and maps representing the mineralogy in the sampled area have been constructed. Based on the SVD classification the percentage of the yttrium-bearing ore minerals can be calculated even in fine-grained rock samples.

  4. Dispersive liquid-liquid microextraction for metals enrichment: a useful strategy for improving sensitivity of laser-induced breakdown spectroscopy in liquid samples analysis.

    Science.gov (United States)

    Aguirre, M A; Selva, E J; Hidalgo, M; Canals, A

    2015-01-01

    A rapid and efficient Dispersive Liquid-Liquid Microextraction (DLLME) followed by Laser-Induced Breakdown Spectroscopy detection (LIBS) was evaluated for simultaneous determination of Cr, Cu, Mn, Ni and Zn in water samples. Metals in the samples were extracted with tetrachloromethane as pyrrolidinedithiocarbamate (APDC) complexes, using vortex agitation to achieve dispersion of the extractant solvent. Several DLLME experimental factors affecting extraction efficiency were optimized with a multivariate approach. Under optimum DLLME conditions, DLLME-LIBS method was found to be of about 4.0-5.5 times more sensitive than LIBS, achieving limits of detection of about 3.7-5.6 times lower. To assess accuracy of the proposed DLLME-LIBS procedure, a certified reference material of estuarine water was analyzed.

  5. Development of a mobile system based on laser-induced breakdown spectroscopy and dedicated to in situ analysis of polluted soils

    Energy Technology Data Exchange (ETDEWEB)

    Bousquet, B. [Centre de Physique Moleculaire Optique et Hertzienne (CPMOH), Universite Bordeaux 1, 351 cours de la Liber