Assessment of Effectiveness of Cool Coat in Reducing Heat Strain among Workers in Steel Industry.

Science.gov (United States)

Parameswarappa, S B; Narayana, J

2017-01-01

A research study was conducted to assess the effectiveness of cool coat in reducing heat strain among workers exposed to heat in a steel plant located in south India. The study consists of assessing heat strain of workers exposed to heat in a steel plant by measuring physiological reactions of workers such as pulse rate and core body temperature with and without cool coat. The coal coat taken for this study was procured from M/s Yamuna Industries, Noida. Out of 140 employees exposed to heat hazard, 101 employees were examined in this study. Study was done in important production units in steel plant having heat hazard. Workers were interviewed and examined and information regarding thermal comfort was collected. First, the heat strain was assessed when the workers were not using cool coats. The air temperature was measured at all hot zone workplaces and found in the range of 34 0 C to 39.4 0 C (Mean: 36.54 0 C & S.D: 1.54). Physiological response such as core body temperature, pulse rate and blood pressure of workers exposed to heat hazard were measured before & after work to know the heat strain sustained by workers when they were working. Maximum core body temperature after work was found to be 39.3 0 C (Mean; 38.52 & S.D; 0.7). Maximum pulse rate of workers after work was found to be 120 beats/minute (Mean; 94.96 beats/minute, S.D: 13.11). The study indicate core body temperature of workers was found more than the permissible exposure limit prescribed by ACGIH, indicating the heat strain sustained by workers is significant, whereas the pulse rate and blood pressure was found normal & not exceeded the limits. Second, with cool coat, the heat strain was assessed among 10 workers selected from the 101 employees. Core body temperature was measured before and soon after work, The core body temperature recorded soon after work was in the range of 35.5 - 37.20C (Mean 36.36, SD= 0.52), indicating a drop in the core body temperature. In this study, a core body

Occupational noise-induced hearing loss in Indian steel industry workers: an exploratory study.

Science.gov (United States)

Singh, Lakhwinder Pal; Bhardwaj, Arvind; Deepak, Kishore Kumar

2013-04-01

The present study focused on exploring the current level of hearing protection and subsequently determined the prevalence of occupational noise-induced hearing loss among casting and forging industry workers. The casting and forging industry provides employment to a significant portion of the population. The level of hearing protection was assessed through questionnaire survey of 572 workers. Out of these workers, 165 and another control group of 57 participants were assessed by formal audiometry. Audiometric tests were conducted at frequencies of 1.0 KHz to 8.0 KHz.The occurrence of hearing loss was determined on the basis of a hearing threshold level with a low fence of 25 dB. Student's test and ANOVA were used to compare the various groups; a p value steel industry are highly exposed to occupational noise. The majority of workers are not protected from noise-induced hearing loss. There is a need to provide special ear protectors for workers engaged in forging. A complete hearing protection program, including training, audiometry, job rotation, and the use of hearing protection devices, needs to be introduced.

Study of Determinants of Lung Cancer Protective Behaviors in Esfahan Steel Company Workers Based On Protection Motivation Theory

OpenAIRE

mohammadali Morowatisharifabad; Leila Hadi varnamkhavasti; Mohammadjavad Zare; Hossein Fallahzadeh; zohre Karimiankakolaki

2017-01-01

Introduction: Lung cancer is known the leading cause of death among cancers. Since in our country a comprehensive scientific information not available on the determinants of protective behavior of lung cancer among workers, this study, aimed to examine determinants of lung cancer protective behaviors among Esfahan Steel Company (ESCO) workers based on protection motivation theory. Methods: This cross-sectional study was performed on 253 workers of the ESCO who were randomly selected. In th...

From occupational safety and health to Workers' Health: history and challenges to the Brazilian Journal of Occupational Health.

Science.gov (United States)

Jackson Filho, José Marçal; Algranti, Eduardo; Saito, Cézar Akiyoshi; Garcia, Eduardo Garcia

2015-07-01

The Revista Brasileira de Saúde Ocupacional (RBSO) - Brazilian Journal of Occupational Health - is an academic peer-reviewed journal in the field of Workers' Health that has been published by Fundacentro since 1973. Its historical trajectory, current performance, challenges and future perspectives were approached, in this paper, from a documental analysis. The journal's history can be divided into three periods, starting during the military government. At the beginning, the journal was the official vehicle for the Brazilian occupational accidents prevention policy, in which Fundacentro played a central role. The early 1980s opens space for technical-scientific publications and the field of Workers' Health emerges on the journal's pages. In 2005-6, a restructuring process is implemented, ensuring independent editorial policy and structures. Since 2006, 139 original papers and 9 thematic issues have been published. The journal is indexed in 9 bibliographic databases, has been ranked B1 in the field of interdisciplinary studies and B2 in the field of public health by CAPES, has an upward trend in the SciELO Impact Factor, and has an h-index of 5 in Google Scholar. Nevertheless, the low scientific production in the field and the high rate of rejection of manuscripts may jeopardize the survival of the journal, which is the main locus for scientific publications in the field of Workers' Health.

Profile of Brazilian workers victims of occupational accidents with biological fluids.

Science.gov (United States)

Miranda, Fernanda Moura D'Almeida; Cruz, Elaine Drehmer de Almeida; Félix, Jorge Cestari Vinícius; Kalinke, Luciana Puchalski; Mantovani, Maria de Fátima; Sarquis, Leila Maria Mansano

2017-01-01

To characterize the Brazilian workers victims of occupational accidents with biological fluids. Epidemiological and descriptive research, in which 284,877 notifications of the Notifiable Diseases Information System were analyzed between 2007 and 2014. We used Stata 13 for data analysis. The highest incidence density occurred in females with 0.8 cases per 1,000 workers/year (n = 222,042, 77.9%); in the age group of 20 to 24 years old, with 0.6 cases per 1,000 workers/year (n = 64,221, 23.3%); with some high school and some college, with 0.6 cases per 1,000 workers/year (n = 141,275, 49.6%). We found that these accidents occurred among 23 occupational subgroups. For the most part, the workers had an employment relationship and had issued the Occupational Accident Notification. It is necessary to rethink the measures of orientation to workers regarding the risks and relative prophylaxis for these accidents, with the aim of reducing them. Caracterizar os trabalhadores brasileiros vítimas de acidente de trabalho com fluidos biológicos. Pesquisa epidemiológica, descritiva, na qual foram analisadas 284.877 notificações do Sistema Nacional de Notificação de Agravos, entre 2007 e 2014. Utilizou-se Stata 13 para a análise dos dados. A maior densidade de incidência ocorreu no sexo feminino com 0,8 caso a cada 1.000 trabalhadores/ano (n = 222.042; 77,9%); na faixa etária de 20 a 24 anos com 0,6 caso a cada 1.000 trabalhadores/ano (n = 64.221; 23,3%); com Ensino Médio e Superior incompleto com 0,6 caso a cada 1.000 trabalhadores/ano (n = 141.275; 49,6%). Verificou-se que esses acidentes ocorreram entre 23 subgrupos ocupacionais. Em sua maioria, os trabalhadores possuíam vínculo empregatício e tiveram emitida a Comunicação de Acidente de Trabalho. Faz-se necessário repensar as medidas de orientação aos trabalhadores quanto aos riscos e profilaxia relativa para estes acidentes, visando reduzi-los ou diminui-los.

Investigation of the effect of occupational noise exposure on blood pressure and heart rate of steel industry workers.

Science.gov (United States)

Zamanian, Zahra; Rostami, Reza; Hasanzadeh, Jafar; Hashemi, Hassan

2013-01-01

This study aimed to investigate the effect of noise exposure on blood pressure and heart rate of steel industry workers. In the present cross-sectional study, 50 workers were selected from a steel company in Fars province, Iran, and exposed to 85, 95, and 105 dB noise levels for 5 minutes. The participants' blood pressure and heart rate were measured using Beurer BC16 pulse meter both before and after the exposure. The study results showed no significant difference in blood pressure and heart rate before and after the exposure. However, the workers' systolic blood pressure had increased compared to before the exposure; of course, the difference was not statistically significant (P > 0.05). Besides, although the subjects' heart rate had reduced in comparison to before the exposure, the difference was not statistically significant (P > 0.05). No significant change was observed in blood pressure and heart rate after acute exposure to 85, 95, and 105 dB noise levels.

A socio-historical approach to policy analysis: the case of the Brazilian Workers' Food Policy.

Science.gov (United States)

Costa-Souza, Jamacy; Vieira-da-Silva, Ligia Maria; Pinell, Patrice

2018-02-05

Policy analyses based on traditional or structuralist definitions of the state are important, but they have some limitations for explaining processes related to policymaking, implementation, and results. Bourdieusian sociology links the analysis to objective and subjective dimensions of social practices and can help elucidate these phenomena. This article provides such empirical evidence by analyzing the social genesis of a Brazilian policy that currently serves 18 million workers and was established by the state in 1976 through the Fiscal Incentives Program for Workers' Nutrition (PIFAT/PAT). The study linked the analysis of the trajectory of social agents involved in the policy's formulation to the historical conditions that allowed the policy to exist in the first place. Although the literature treats the policy as a workers' food program (PAT), the current study showed that it actually represented a new model for paying financial subsidies to companies that provided food to their employees, meanwhile upgrading the commercial market for collective meals. The study further showed that the program emerged as an administrative policy, but linked to economic agents. The program became a specific social space in which issues related to workers' nutrition became secondary, but useful for disguising what had been an explicit side of its genesis, namely its essentially fiscal nature.

Study of occupational health impact of atmospheric pollution on exposed workers at an iron and steel complex by using neutron activation analysis of scalp hair

International Nuclear Information System (INIS)

Chai, Z.F.; Qian, Q.F.; Feng, X.Q.; Zhang, P.Q.; Liu, N.Q.; Feng, W.Y.

2004-01-01

The occupational health impact of atmospheric pollution on exposed workers at one iron and steel complex was studied by instrumental neutron activation analysis of workers' hair samples and medical examination. The experimental results indicate that there is a positive correlation between the high inhalation amounts of iron and other trace elements by the exposed workers and the symptom of their high blood pressure and hypoglycemia, which implies that the atmospheric environment polluted by iron and steel industry has an adverse health impact on the exposed workers. The measures to relieve and abate the occupational diseases caused by air-borne particulate matter should be taken. (author)

Food consumption of sugarcane workers' families in the Brazilian Northeast

Directory of Open Access Journals (Sweden)

Vanessa Messias Muniz

2015-04-01

Full Text Available OBJECTIVE: To analyze the food intake of sugarcane workers' family members. METHODS: The food intake of 159 family members of sugarcane workers from Gameleira, Pernambuco, Brazilian Northeast, was investigated by directly weighing the foods on three non-consecutive days. The percent risk of inadequate macro- and micronutrient intakes was analyzed according to the Reference Dietary Intakes. The macronutrients were analyzed in relation to acceptable distribution intervals. The energy consumed from the various food groups was expressed as a ratio of the total energy intake. RESULTS: The median intake of carbohydrates and proteins remained above the Estimated Average Requirement, and all age groups presented a low risk of inadequate carbohydrate and protein intakes. The median intakes of riboflavin, niacin, thiamin, and iron remained above the Estimated Average Requirement for all age groups, but children aged 1-3 years presented a high percent risk of inadequate iron intake. All age groups presented high percent risk of inadequate zinc, calcium, vitamin A, and vitamin C intakes. Grains and derivatives had a greater participation in the total energy intake, especially in men aged 19-30 years. The group "milk and dairy products" had a greater participation in the diet of children aged 1-3 years. CONCLUSION: The low percent risk of inadequate carbohydrate and protein intakes in all age groups was opposed to the high risk of inadequate mineral and vitamin intakes, making the population vulnerable to nutritional disorders caused by excess macronutrient intake and inadequate micronutrient intake.

Prevalence of undiagnosed cardiovascular risk factors and 10-year CVD risk in male steel industry workers.

Science.gov (United States)

Gray, Benjamin J; Bracken, Richard M; Turner, Daniel; Morgan, Kerry; Mellalieu, Stephen D; Thomas, Michael; Williams, Sally P; Williams, Meurig; Rice, Sam; Stephens, Jeffrey W

2014-05-01

To assess the prevalence of undiagnosed cardiovascular disease (CVD) in a cohort of male steelworkers in South Wales, UK. Male steel industry workers (n = 221) with no prior diagnosis of CVD or diabetes accepted a CVD risk assessment within the work environment. Demographic, anthropometric, family, and medical histories were all recorded and capillary blood samples obtained. The 10-year CVD risk was predicted using the QRISK2-2012 algorithm. Up to 81.5% of workers were either overweight or obese. More than 20% of workers were found to have diastolic hypertension, high total cholesterol, and/or a total cholesterol/high-density lipoprotein ratio of six or more. Over one quarter of workers assessed had an increased 10-year CVD risk. Despite a physically demanding occupation, risk assessment in the workplace uncovered significant occult factors in CVD risk in a sample of male heavy industry workers.

Sickness Absenteeism, Morbidity and Workplace Injuries among Iron and Steel workers – A Cross Sectional Study from Karnataka, Southern India

Directory of Open Access Journals (Sweden)

Manjunatha R

2011-03-01

Full Text Available BackgroundThe study of illnesses causing absence of workers from workin industries is a practical method to study the health statusof industrial workers and to identify occupational healthhazards. The iron and steel industries are particularlyhazardous places of work. Published data from India onhealth status of iron and steel workers is limited, thereforethis study was undertaken to investigate the sicknessabsenteeism, morbidity and workplace injuries among thispopulation.MethodWorkers were selected using stratified random sampling. Astructured pre-tested interview schedule was used tocollect the data. A p value of < 0.05 was considered forstatistical significance.ResultsFrom a total of 2525 workers, 353 (mean age 55.1 yrs, male69.4% participated in the study. The overall proportion ofsickness absenteeism was 66.9% (95% CI: 0.62 – 0.71.Overall 16.4 days were lost per worker per year (male = 16.5& female = 16.2 due to sickness absence. A blue collarworker lost 21.5 days compared to 11.9 days by a whitecollar worker (p < 0.01. Among workers, health ailmentsrelated to the musculoskeletal system (31.4%,gastrointestinal system (25.8%, hypertension (24.4%,respiratory system (18.1% and other minor ailments(19.3% were found to be high.ConclusionSickness absenteeism is significantly higher among iron andsteel workers when compared to other occupations in India.Blue collar workers and shift workers loose higher numberof days due to sickness absence, and they face problemsrelated to musculoskeletal system, gastrointestinal systemand hypertension in higher proportions compared to theircounterparts. Women experienced hypertension as thecommon health problem and higher proportions of injuriesoutside the work environment.

Investigation of the Effect of Occupational Noise Exposure on Blood Pressure and Heart Rate of Steel Industry Workers

Science.gov (United States)

Zamanian, Zahra; Rostami, Reza; Hasanzadeh, Jafar; Hashemi, Hassan

2013-01-01

Background and Objectives. This study aimed to investigate the effect of noise exposure on blood pressure and heart rate of steel industry workers. Materials and Methods. In the present cross-sectional study, 50 workers were selected from a steel company in Fars province, Iran, and exposed to 85, 95, and 105 dB noise levels for 5 minutes. The participants' blood pressure and heart rate were measured using Beurer BC16 pulse meter both before and after the exposure. Results. The study results showed no significant difference in blood pressure and heart rate before and after the exposure. However, the workers' systolic blood pressure had increased compared to before the exposure; of course, the difference was not statistically significant (P > 0.05). Besides, although the subjects' heart rate had reduced in comparison to before the exposure, the difference was not statistically significant (P > 0.05). Conclusion. No significant change was observed in blood pressure and heart rate after acute exposure to 85, 95, and 105 dB noise levels. PMID:23781252

Domestic violence against women, public policies and community health workers in Brazilian Primary Health Care.

Science.gov (United States)

Signorelli, Marcos Claudio; Taft, Angela; Pereira, Pedro Paulo Gomes

2018-01-01

Domestic violence creates multiple harms for women's health and is a 'wicked problem' for health professionals and public health systems. Brazil recently approved public policies to manage and care for women victims of domestic violence. Facing these policies, this study aimed to explore how domestic violence against women is usually managed in Brazilian primary health care, by investigating a basic health unit and its family health strategy. We adopted qualitative ethnographic research methods with thematic analysis of emergent categories, interrogating data with gender theory and emergent Brazilian collective health theory. Field research was conducted in a local basic health unit and the territory for which it is responsible, in Southern Brazil. The study revealed: 1) a yawning gap between public health policies for domestic violence against women at the federal level and its practical application at local/decentralized levels, which can leave both professionals and women unsafe; 2) the key role of local community health workers, paraprofessional health promotion agents, who aim to promote dialogue between women experiencing violence, health care professionals and the health care system.

Steel dust in the New York City subway system as a source of manganese, chromium, and iron exposures for transit workers.

Science.gov (United States)

Chillrud, Steven N; Grass, David; Ross, James M; Coulibaly, Drissa; Slavkovich, Vesna; Epstein, David; Sax, Sonja N; Pederson, Dee; Johnson, David; Spengler, John D; Kinney, Patrick L; Simpson, H James; Brandt-Rauf, Paul

2005-03-01

The United States Clean Air Act Amendments of 1990 reflected increasing concern about potential effects of low-level airborne metal exposure on a wide array of illnesses. Here we summarize results demonstrating that the New York City (NYC) subway system provides an important microenvironment for metal exposures for NYC commuters and subway workers and also describe an ongoing pilot study of NYC transit workers' exposure to steel dust. Results from the TEACH (Toxic Exposure Assessment, a Columbia and Harvard) study in 1999 of 41 high-school students strongly suggest that elevated levels of iron, manganese, and chromium in personal air samples were due to exposure to steel dust in the NYC subway. Airborne concentrations of these three metals associated with fine particulate matter were observed to be more than 100 times greater in the subway environment than in home indoor or outdoor settings in NYC. While there are currently no known health effects at the airborne levels observed in the subway system, the primary aim of the ongoing pilot study is to ascertain whether the levels of these metals in the subway air affect concentrations of these metals or related metabolites in the blood or urine of exposed transit workers, who due to their job activities could plausibly have appreciably higher exposures than typical commuters. The study design involves recruitment of 40 transit workers representing a large range in expected exposures to steel dust, the collection of personal air samples of fine particulate matter, and the collection of blood and urine samples from each monitored transit worker.

A retrospective mortality study of workers exposed to radon in a Brazilian coal mine

International Nuclear Information System (INIS)

Veiga, Lene Holanda Sadler

2004-08-01

High levels of radon concentration were found in the underground workplace of an underground coal mine in Parana state, which has been in activity since 1942. Many of these workers were exposed for a long period of time to a work atmosphere with high radon, and radon decay products concentration. Taking this into account, it was decided to carry on a historical cohort, study with the workers' of this mining universe (underground and surface) in. order to evaluate the possible health effects related to this exposure, by means of a retrospective study of mortality. Through multiple strategies, it was possible to trace the vital status of 90% of the cohort. The causes of the deaths were identified by active search, of Death Declarations in the Health Office of Parana state and also in and other states. The success rate of cause of death identification was 100%. The final, cohort included 1946 underground workers and 910 surface workers. Standard mortality ratio (SMR) analysis showed lower mortality from all causes for both underground (SMR-88, 95%CI=78-98) and surface workers (SMR=96, 95%CI=81- 113). A highly significant SMR was observed for pneumonia cause of death among surface ((SMR=284, 95%CI=118-684) and underground miners (SMR-254, 95%CI=140-459), while a highly significant lung cancer mortality risk was observed only for underground miners (SMR=177, 95%CI=105-299) with a significant trend in relation to years of underground work (duration of exposure). Taking into account that mortality from smoking-related cancers other than lung cancer is not elevated in underground workers and diesel equipment were not used at this mine, the results suggest that the exposure to radon daughters may have been responsible for the lung cancer excess among underground workers. This work consists of the first historical Brazilian cohort involving miners exposed to radon and one of the few historical cohorts built in Brazil. It should be considered the fact that many workers of

Structural steels for fixed offshore platforms: technical challenges at the Brazilian national supply chain; Acos estruturais para plataformas fixas offshore: desafios tecnicos junto a cadeia de suprimentos nacional brasileira

Energy Technology Data Exchange (ETDEWEB)

Castro, Fabio Modesti Orsini de [Promon Engenharia Ltda., Rio de Janeiro, RJ (Brazil)

2012-07-01

This paper presents the main technical requirements for structural steel applied to the construction of bottom fixed offshore platforms, based on the most widely adopted and recognized actual standards. The mechanical properties and lab tests necessary to fulfill the Risk Management and E and P companies requirements are presented aiming to build the theoretical bases necessary for the engineering design of projects of this kind. The main types of steel available in the national market are presented at the end, giving an overall look at the Brazilian steel supply chain. (author)

Identification of high-risk groups among maintenance workers in a steel company with respect to musculoskeletal symptoms and workload

NARCIS (Netherlands)

Hildebrandt, V.H.; Bongers, P.M.; Dul, J.; Dijk, F.J.H. van; Kemper, H.C.G.

1996-01-01

To determine priorities for ergonomic improvements in five maintenance departments of a steel company, a study was carried out to identify groups with a high prevalence of musculoskeletal problems or a high exposure to unfavourable musculoskeletal workload. All workers were asked to complete a

Morbidity from ischemic heart disease in workers at a stainless steel welding factory

Directory of Open Access Journals (Sweden)

Bjørn Hilt

2009-10-01

Full Text Available  ABSTRACTObjectives:  Methods:  Results:  Conclusion:  Key terms:  Angina pectoris, cardiovascular diseases, grinding, ischemic heart disease, metal workers,myocardial infarction, stainless steel, weldingIn accord with some other studies, the results of the study support a hypothesis that there maybe a relation between exposure factors to which stainless steel metal workers are exposed and an increasedrisk of ischemic heart disease.There were 236 men from the study group and 989 men from the control group who fulfilled theinclusion criteria, and who answered the questionnaires. The bivariate analysis showed that the study grouphad an increased age and smoking adjusted prevalence of "chest pain on exercise" and "angina pectoris"with ratios 2.3 (95% CI 1.5–4.9 and 2.6 (95% 1.2–5.7 respectively. When using multiple logistic regressionanalysis with control for potential confounding factors, the odds ratios for the study group as comparedto the control group, were 2.6 (95% CI 1.3–5.3 for "chest pain on exercise", 2.5 (95% CI 1.1–5.8 for"angina pectoris", and 2.4 (95% CI 1.1–4.9 for myocardial infarction. The only explanatory variable whichshowed statistically significant increased odds ratios for all three outcome variables was work with grinding,with 2.4 (95% CI 1.0–5.5, 3.3 (1.3–8.5, and 2.5 (1.1–5.9 respectively.All the men who had worked at the plant for more than one year since 1960, and who were underthe age of 70 years at the time of the study, were included in the study group. The control group wasrandomly selected from the male population of the same town, and was categorically matched for age. A selfadministered questionnaire was used to collect information on the occurrence of CVD and related symptoms,background variables, and exposure factors. The validity of the outcome variables for a subgroup ofthe participants was checked with their appointed general practitioners. This validation revealed a low

The efficacy of radiant heat controls on workers' heat stress around the blast furnace of a steel industry.

Science.gov (United States)

Giahi, Omid; Darvishi, Ebrahim; Aliabadi, Mohsen; Khoubi, Jamshid

2015-01-01

Workers' exposure to excessive heat in molten industries is mainly due to radiant heat from hot sources. The aim of this study was to evaluate the efficacy of radiant heat controls on workers heat stress around a typical blast furnace. Two main interventions were applied for reducing radiant heat around the blast furnace of a steel industry located in western Iran. These included using a heat absorbing system in the furnace body and installing reflective aluminum barrier in the main workstation. Heat stress indexes were measured before and after each intervention using the digital WBGT-meter. The results showed MRT and WBGT indexes decreased by 20 °C and 3.9 °C, respectively after using heat absorbing system and also decreased by 18.6 °C and 2.5 °C, respectively after installing a reflective barrier. These indexes decrease by 26.5 °C and 5.2 °C, respectively due to the simultaneous application of the two interventions which were statistically significant (p steel industries.

Metal dust exposure and lung function deterioration among steel workers: an exposure-response relationship.

Science.gov (United States)

Hamzah, Nurul Ainun; Mohd Tamrin, Shamsul Bahri; Ismail, Noor Hassim

2016-07-01

Metallic dust is a heterogeneous substance with respiratory sensitizing properties. Its long term exposure adversely affected lung function, thus may cause acute or chronic respiratory diseases. A cross-sectional study was conducted in a steel factory in Terengganu, Malaysia to assess the metal dust exposure and its relationship to lung function values among 184 workers. Metal dust concentrations values (Co, Cr, and Ni) for each worker were collected using air personal sampling. Lung function values (FEV 1 , FVC, and %FEV 1 /FVC) were determined using spirometer. Exposure to cobalt and chromium were 1-3 times higher than permissible exposure limit (PEL) while nickel was not exceeding the PEL. Cumulative of chromium was the predictor to all lung function values (FEV 1 , FVC, and %FEV 1 /FVC). Frequency of using mask was positively associated with FVC (Adj b = 0.263, P = 0.011) while past respiratory illnesses were negatively associated with %FEV 1 /FVC (Adj b = -1.452, P = 0.026). Only few workers (36.4%) were found to wear their masks all times during the working hours. There was an exposure-response relationship of cumulative metal dust exposure with the deterioration of lung function values. Improvement of control measures as well as proper and efficient use or personal protection equipment while at work could help to protect the respiratory health of workers.

Metabolic Polymorphisms and Clinical Findings Related to Benzene Poisoning Detected in Exposed Brazilian Gas-Station Workers

Directory of Open Access Journals (Sweden)

Simone Mitri

2015-07-01

Full Text Available Benzene is a ubiquitous environmental pollutant and an important industrial chemical present in both gasoline and motor vehicle emissions. Occupational human exposure to benzene occurs in the petrochemical and petroleum refining industries as well as in gas-station workers, where it can lead to benzene poisoning (BP, but the mechanisms of BP are not completely understood. In Brazil, a significant number of gas-station service workers are employed. The aim of the present study was to evaluate alterations related to BP and metabolic polymorphisms in gas-station service workers exposed to benzene in the city of Rio de Janeiro, Brazil. Occupational exposure was based on clinical findings related to BP, and metabolic polymorphisms in 114 Brazilian gas-station attendants. These workers were divided into No Clinical Findings (NCF and Clinical Findings (CF groups. Neutrophil and Mean Corpuscular Volume (MCV showed a significant difference between the two study groups, and neutrophil has the greatest impact on the alterations suggestive of BP. The clinical findings revealed higher frequencies of symptoms in the CF group, although not all members presented statistical significance. The frequencies of alleles related to risk were higher in the CF group for GSTM1, GSTT1, CYP2E1 7632T > A, but lower for NQO1 and CYP2E1 1053C > T genotypes. Moreover, an association was found between GSTM1 null and alterations related to BP, but we did not observe any effects of other polymorphisms. Variations in benzene metabolizing genes may modify benzene toxicity and should be taken into consideration during risk assessment evaluations.

Ergonomic prevention of musculoskeletal disorders of maintenance workers in the steel industry : Guidelines for the optimum working height of selected maintenance operations

NARCIS (Netherlands)

Dul, J.; Bolijn, A.J.; Delleman, N.J.; Hildebrandt, V.H.

1991-01-01

In the steel industry musculoskeletal disorders are important determinants of sickness and absenteeism. Prevention of biomechanical risk is therefore important, both for industry and the workers themselves. In this research project, ergonomic guidelines have been developed to reduce high

National registry of workers occupational exposure to ionizing radiation

International Nuclear Information System (INIS)

Cunha, P.G. da; Mota, H.C.; Alegre, S.

1995-01-01

The Brazilian Nuclear Energy Commission started in 1987 a nationwide program in order to collect and maintain the radiation exposure records of the Brazilian workers. This data base consists of several files including: workers - personal data; institutions - section or department where the workers perform their activities; and annual doses - annual integrated doses and any relevant information regarding their exposures. The data base structure is introduced in the present work where its objectives are discussed taking into account the magnitude of the program as well as the difficulties of maintaining and the long term perspectives of a nationwide register of radiation occupational exposures. (author). 15 refs., 1 fig

[Prevalence and correlation factors of carotid atherosclerosis among the middle and old aged workers in an iron and steel corporation, Chongqing].

Science.gov (United States)

Zhang, Dong-ping; Li, Jin-fang; Hu, Chang-lin; Huang, Hui

2009-04-01

To investigate the prevalence and correlation factors of carotid atherosclerosis (CAS) among workers of Chongqing Iron and Steel Corporation, and to offer information for the development of prevention program for cerebro-vascular disease. 512 asymptomatic individuals (mean age 56.8 years, ranged from 45 to 80) from the subsidiary workshop of Chongqing Iron and Steel Corporation were recruited. Demographic data and serum were collected and the internal-media thickness (IMT) of the CAS and the extent of plaque formation were evaluated by B-mode ultrasound. Logistic regression analysis was used to estimate the correlation factors of CAS. Results (1) The overall prevalence of carotid atherosclerosis among the iron and steel workers was 37.6%. IMT was found as 10.2% , with the prevalence rates of nonstenotic plaque and stenotic plaque were 25.0% and 2.4% respectively. (2) It was shown by logistic regression analysis that age (OR = 1.289, 95% CI: 1.014-1.568, P < 0.001), smoking (OR = 1.420, 95% CI: 0.802-3.872, P < 0.001), hypertension (OR= 4.530, 95% CI: 3.952-6.753, P < 0.001) , diabetes mellitus (OR = 2.285, 95% CI: 1.008-5.057, P < 0.001), HsCRP (OR = 1.273, 95% CI: 0.479-2.889, P = 0.037), TC (OR = 1.032, 95% CI: 0.320-1.882, P = 0.047) and LDL-C (OR = 2.313, 95% CI: 1.237-4.331, P = 0.008) were significantly associated with the severity of CAS. (3) Prevalence of the CAS increased with the increasing number of correlation factors. The prevalence of CAS among the iron and steel workers was higher than those in ordinary people of the same age. Age, smoking, hypertension, diabetes mellitus, HsCRP, TC and LDL-C were independent risk factors related to CAS. The prevalence of CAS was increasing parallel to the number of correlation factors.

Occupational Profiles in the European Steel Industry.

Science.gov (United States)

Franz, Hans-Werner; And Others

The steel industry in Europe has faced great changes, with resulting layoffs and restructuring. Now that the most basic changes seem to be over, it has become evident that the remaining steel industry requires more highly trained workers than was the case previously. Although steel maintenance employees were always highly skilled, steel production…

A cohort study of psychosocial work stressors on work ability among Brazilian hospital workers.

Science.gov (United States)

Martinez, Maria Carmen; do Rosário Dias de Oliveira Latorre, Maria; Fischer, Frida Marina

2015-07-01

Hospital work is characterized by stressors that can influence work ability. The present study aims to assess the association between psychosocial work stressors and changes in work ability in a group of Brazilian hospital employees. From 1,022 workers included in a 3-year cohort started in 2009, 423 (41.4%) returned the applied questionnaires in 2012. Changes in work ability were considered as the dependent variable and the investigated psychosocial work stressors as independent variables. Logistic regression models adjusted for potential con-founders (demographic, occupational features, social support, overcommitment, and situations liable to cause pain/injury). High levels of exposure to psychosocial work stressors were significantly associated with decreased work ability: job strain (OR = 2.81), effort-reward imbalance (OR = 3.21). Strategies to reduce psychosocial work stressors should be considered to maintain hospital employees' work ability. Such strategies have implications for institutional and social policies and might be included in quality management programs. © 2015 Wiley Periodicals, Inc.

Sociodemographic differences in walking for leisure and for commuting in Brazilian workers

Directory of Open Access Journals (Sweden)

Rodrigo de Rosso Krug

2016-06-01

Full Text Available Abstract Walking is a great health promotion strategy due to its beneficial effects. Objetive: To identify the prevalence of walking for leisure and for commuting to work and its association with sociodemographic factors among 47,477 Brazilian workers. Walking and sociodemographic factors were obtained from a self-reported questionnaire. Poisson regression was used. Among men, walking for leisure was more frequent in those who were older, live with a partner, had a higher level of education and income, and worked in the Southeastern region of Brazil. When commuting, it was more prevalent among single men, who had a lower level of education and income and worked in the Southern region of this country. Among women, walking for leisure was more common in those who lived with a partner, had no children, and worked in the Southern region. There was an association between the outcome and age, education and family income. Regarding commuting, it was more prevalent among older individuals, without a partner, with a lower level of education and income, and working in the Southern region. Walking was associated with sociodemographic characteristics, with differences between sexes.

Comparing creep in two stainless steels AISI 316

International Nuclear Information System (INIS)

Silveira, T.L. da; Monteiro, S.N.

1976-07-01

Two AISI 316 stainless steels, one of Brazilian fabrication (Villares), the other of foreign fabrication (Uddeholm) were submitted to creep tests with temperature ranging from 600 to 800 0 C. Some important differences in the mechanical behaviour of the two steels are pointed out. These differences are due to the particular thermomechanical history of the materials under consideration. (Author) [pt

Auburn Steel Company radioactive contamination incident

International Nuclear Information System (INIS)

Bradley, F.J.; Cabasino, L.; Kelly, R.; Awai, A.; Kasyk, G.

1986-04-01

On February 21, 1983, workers at the Auburn Steel Company, Auburn, New York discovered that about 120 tons of steel poured that day had become contaminated with 60 Co. In addition to the steel, the air cleaning system and portions of the mill used in casting the steel were contaminated. Approximately 25 curies of 60 Co were involved. Decontamination and disposal of the contamination cost in excess of $2,200,000. This report details the discovery of the contamination, decontamination of the plant and disposal of the contamination

Association of workplace and population characteristics with prevalence of hypertension among Brazilian industry workers: a multilevel analysis.

Science.gov (United States)

Vinholes, Daniele B; Bassanesi, Sérgio L; Chaves Junior, Hilton de Castro; Machado, Carlos Alberto; Melo, Ione M F; Fuchs, Flavio Danni; Fuchs, Sandra Costa

2017-08-21

Exposure to risk factors for hypertension may be influenced by the characteristics of the workplace, where workers spend most of their daily time. To evaluate the association between features of the companies, particularly the presence of facilities to provide meals, and of population characteristics and the prevalence of hypertension, taking into account individual risk factors for hypertension. This multilevel analysis was based on a cross-sectional study with individual and company data from the SESI (Serviço Social da Indústria-Social Service of Industries) study and population-based data from the national census statistics. Workers aged ≥15 years were randomly selected from small (20-99), medium (100-499) and large (≥500 employees) companies per state using multistage sampling. Logistic regression was used to analyse the association between hypertension and individual, workplace and population variables, with odds ratios (ORs; 95% CI) adjusted for three-level variables. 4818 Workers from 157 companies were interviewed and their blood pressure, weight and height were measured. Overall, 77% were men, aged 35.4 ±10.7 years, with 8.7 ±4.1 years of schooling and mostly worked in companies with a staff canteen (66%). Besides individual characteristics-being male, ageing, low schooling, alcohol abuse and higher BMI-a workplace with no staff canteen (OR=1.28; 95% CI 1.08 to 1.52), small companies (OR=1.31; 95% CI 1.07 to 1.60) and living in cities with higher economic inequality (OR=1.47; 95% CI 1.23 to 1.76) were associated with a higher risk for hypertension. Among Brazilian workers, the prevalence of hypertension is associated with individual risk factors, lack of a canteen at the workplace, small companies and higher economic inequalities of cities. These three-level characteristics help to interpret differences in the prevalence of hypertension between regions or countries. © Article author(s) (or their employer(s) unless otherwise stated in the

[Measurement of chemical agents in metallurgy field: electric steel plant].

Science.gov (United States)

Cottica, D; Grignani, E; Ghitti, R; Festa, D; Apostoli, P

2012-01-01

The steel industry maintains its important position in the context of the Italian production involving thousands of workers. The iron and steel processes are divided into primary steel industry, production of intermediate minerals, and secondary steel, scrap from the production of semi-finished industrial and consumer sector (metal inserted into components and metal used for dissipative uses, primarily coatings) and industrial waste. The paper presents the results of environmental monitoring carried out in some electric steel plant for the measurement of airborne chemicals that characterize the occupational exposure of workers employed in particular area like electric oven, to treatment outside the furnace, continuous casting area. For the sampling of the pollutants were used both personal and in fixed positions samplers. The pollutants measured are those typical of steel processes inhalable dust, metals, respirable dust, crystalline silica, but also Polycyclic Aromatic Hydrocarbons (PAH), polychlorinated dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs).

A methodology for replacement of conventional steel by microalloyed steel in bus tubular structures

International Nuclear Information System (INIS)

Cruz, Magnus G.H.; Viecelli, Alexandre

2008-01-01

The aim of this article is to show the use of a methodology that allows, in a trustful way and without the need to build up a complete physical model, the replacement of conventional steel by structural microalloyed steel (HSLA) in tubular structure, concerning passengers transport in vehicles with capacity of more than 20 people. The validation of the methodology is based on the ECE R66-00 regulation and on the Brazilian CONTRAN 811/96 resolution, which regulate minimal conditions of safety for this kind of vehicle. The methodology has four sequential and dependent stages, where the main focus is related to the experimental tests through the models that are simplified initially for later calibration using finite element method. Modular structures made of two different materials were tested and analyzed to confirm the present methodology, first the structure made of steel that is used by the bus industry in Brazil was tested and then it was compared with the new microalloyed steel. Experimental values are compared with calculated ones, foreseeing parametric optimisation and keeping the security levels according to legislation

A methodology for replacement of conventional steel by microalloyed steel in bus tubular structures

Energy Technology Data Exchange (ETDEWEB)

Cruz, Magnus G.H. [Marcopolo S.A., Unidade Ana Rech, Av. Rio Branco, 4889, Ana Rach, 95060-650 Caxias do Sul (Brazil)], E-mail: magnus@verbonet.com.br; Viecelli, Alexandre [Mechanical Engineering Department, Universidade de Caxias do Sul, Rua Francisco Getulio Vargas, 1130, 95070-560 Caxias do Sul, RS (Brazil)], E-mail: avieceli@ucs.br

2008-07-01

The aim of this article is to show the use of a methodology that allows, in a trustful way and without the need to build up a complete physical model, the replacement of conventional steel by structural microalloyed steel (HSLA) in tubular structure, concerning passengers transport in vehicles with capacity of more than 20 people. The validation of the methodology is based on the ECE R66-00 regulation and on the Brazilian CONTRAN 811/96 resolution, which regulate minimal conditions of safety for this kind of vehicle. The methodology has four sequential and dependent stages, where the main focus is related to the experimental tests through the models that are simplified initially for later calibration using finite element method. Modular structures made of two different materials were tested and analyzed to confirm the present methodology, first the structure made of steel that is used by the bus industry in Brazil was tested and then it was compared with the new microalloyed steel. Experimental values are compared with calculated ones, foreseeing parametric optimisation and keeping the security levels according to legislation.

77 FR 70478 - RG Steel Wheeling, LLC, Wheeling Office, A Division Of RG Steel, LLC, Including On-Site Leased...

Science.gov (United States)

2012-11-26

... Unlimited and Green Energy Initiatives LLC, Including Workers Whose Wages Were Reported Through Severstal..., Wheeling Office, a division of RG Steel, LLC, including on-site leased workers from Pro Unlimited and Green Energy Initiatives, LLC, Wheeling, West Virginia (TA-W-81,880) and Mountain State Carbon, LLC, including...

The Brazilian external individual monitoring scenario

International Nuclear Information System (INIS)

Mauricio, Claudia L.P.; Silva, Claudio R. da; Cunha, Paulo G. da

2015-01-01

In order to improve radiation protection it is necessary to have knowledge of the occupational radiation dose levels in all radiation facilities. This information comes from individual monitoring services, which are responsible for measuring and providing information about workers' radiation exposure. In 1981, the Comissao Nacional de Energia Nuclear (CNEN) of Brazil starts to develop a comprehensive system for regulation and storage of occupational radiation dose. This paper starts with an overview of the evolution of the Brazilian authorization and data storage system for external individual monitoring. It starts with a rule for authorization of all Brazilian photon individual monitoring services and the obligation for them to send the measured dose to CNEN. Up to now there is no regulation for neutron individual monitoring. The aim of this paper is to present the current scenario of the Brazilian external monitoring system, reinforcing its importance and remaining problems. The number of monitored workers greatly increases every year, having surpassed 150,000 people monitored. The stored data show that the mean annual occupational external dose is decreasing from 2.4 mSv in 1987 to about 0.6 mSv, in 2012, but there is still some not realistic very high dose measured (higher than 100 mSv), without investigation. About 80% of the annual dose values are lower than the monthly register level. As expected, the higher real photon doses are found in Nuclear Medicine, Industrial Radiology and Interventional Radiology. All recorded annual neutron dose values are lower than 20 mSv. (author)

Brazilian human resources in a polarized Latin America

Directory of Open Access Journals (Sweden)

Elza Fátima Rosa Veloso

2014-12-01

Full Text Available This article provides an overview of human resource strategies employed by Brazilian companies in a polarized region of Latin America. Firstly, we highlighted the concerns of Brazilian managers in respect to the coming years, and to identify the current strategic approach of prominent companies in the Brazilian market. Secondly, we identified possible strategies for internationalization, particularly in the context of Latin America. The results of two surveys were used: one prospecting management trends by 2015 and another consisting of a sample of 541 companies that participate in a national survey in which HR managers answered a questionnaire. Among the results, it is noteworthy that the main issues of concern for Brazilian managers in the coming years. We found most the companies concerned with these challenges in the industries of information technology, iron and steel, and health services. Forty-nine of a total of 541 companies intend to internationalize, 17 of them towards Latin American. Their profile characterization allowed us to divide them into two groups: those focusing on the local needs of Latin American, and those looking to meet the expanding needs of Brazil or the country of their parent company.

The 2014 Elections and the Brazilian Party System

Directory of Open Access Journals (Sweden)

Carlos Ranulfo Melo

2015-04-01

Full Text Available The Brazilian party system presents a paradox. Although the Workers Party (PT and the Brazilian Social Democratic Party (PSDB have controlled presidential elections for the last 20 years, their force at the other levels of electoral competition has not grown. The objective of this study is to undertake a discussion of this situation through the 2014 general elections. After attempting to explain why successive challengers have not been able to change the structure of competition for the Brazilian presidency, I will analyze the relation established between the pattern observed at this level and the other “connected” electoral disputes—both those for state executive and federal legislative office. The general conclusion is that even if the pattern continues, it is quite improbable that this will significantly impact the other levels of national political party competition.

Prevalence of permanent hearing threshold shift among workers of Indian iron and steel small and medium enterprises: a study.

Science.gov (United States)

Singh, Lakhwinder Pal; Bhardwaj, Arvind; Kumar, Deepak Kishore

2012-01-01

Occupational noise exposure and noise-induced hearing loss (NIHL) have been recognized as a problem among workers in Indian industries. The major industries in India are based on manufacturing. There are appreciable numbers of casting and forging units spread across the country. The objective of this study is to determine the prevalence of permanent hearing threshold shift among the workers engaged in Indian iron and steel small and medium enterprises (SMEs) and compared with control group subjects. As a part of hearing protection intervention, audiometric tests were conducted at low (250-1000 Hz), medium (1500-3000 Hz), and high (4000-8000 Hz) frequencies. The occurrence of hearing loss was determined based on hearing threshold levels with a low fence of 25 dB. Comparisons were made for hearing threshold at different frequencies between the exposed and control groups using Student's t test. ANOVA was used for the comparison of hearing threshold dB at different frequencies among occupation and year of experience. A P value workers engaged in various processes of casting and forging industry showed hearing loss in the noise-sensitive medium and higher frequencies. Occupation was significantly associated with NIHL, and hearing loss was particularly high among the workers of forging section. The analyses revealed a higher prevalence of significant hearing loss among the forging workers compared to the workers associated with other activities. The study shows alarming signals of NIHL, especially in forging workers. The occupational exposure to noise could be minimized by efficient control measures through engineering controls, administrative controls, and the use of personal protective devices. Applications of engineering and/or administrative controls are frequently not feasible in the developing countries for technical and financial reasons. A complete hearing conservation programme, including training, audiometry, job rotation, and the use of hearing protection

Prevalence of permanent hearing threshold shift among workers of Indian iron and steel small and medium enterprises: A study

Directory of Open Access Journals (Sweden)

Lakhwinder Pal Singh

2012-01-01

Full Text Available Occupational noise exposure and noise-induced hearing loss (NIHL have been recognized as a problem among workers in Indian industries. The major industries in India are based on manufacturing. There are appreciable numbers of casting and forging units spread across the country. The objective of this study is to determine the prevalence of permanent hearing threshold shift among the workers engaged in Indian iron and steel small and medium enterprises (SMEs and compared with control group subjects. As a part of hearing protection intervention, audiometric tests were conducted at low (250-1000 Hz, medium (1500-3000 Hz, and high (4000-8000 Hz frequencies. The occurrence of hearing loss was determined based on hearing threshold levels with a low fence of 25 dB. Comparisons were made for hearing threshold at different frequencies between the exposed and control groups using Student′s t test. ANOVA was used for the comparison of hearing threshold dB at different frequencies among occupation and year of experience. A P value <0.05 was considered as statistically significant. All data were presented as mean value (SD. Over 90% of workers engaged in various processes of casting and forging industry showed hearing loss in the noise-sensitive medium and higher frequencies. Occupation was significantly associated with NIHL, and hearing loss was particularly high among the workers of forging section. The analyses revealed a higher prevalence of significant hearing loss among the forging workers compared to the workers associated with other activities. The study shows alarming signals of NIHL, especially in forging workers. The occupational exposure to noise could be minimized by efficient control measures through engineering controls, administrative controls, and the use of personal protective devices. Applications of engineering and/or administrative controls are frequently not feasible in the developing countries for technical and financial reasons. A

Prediction of hearing loss among the noise-exposed workers in a steel factory using artificial intelligence approach.

Science.gov (United States)

Aliabadi, Mohsen; Farhadian, Maryam; Darvishi, Ebrahim

2015-08-01

Prediction of hearing loss in noisy workplaces is considered to be an important aspect of hearing conservation program. Artificial intelligence, as a new approach, can be used to predict the complex phenomenon such as hearing loss. Using artificial neural networks, this study aims to present an empirical model for the prediction of the hearing loss threshold among noise-exposed workers. Two hundred and ten workers employed in a steel factory were chosen, and their occupational exposure histories were collected. To determine the hearing loss threshold, the audiometric test was carried out using a calibrated audiometer. The personal noise exposure was also measured using a noise dosimeter in the workstations of workers. Finally, data obtained five variables, which can influence the hearing loss, were used for the development of the prediction model. Multilayer feed-forward neural networks with different structures were developed using MATLAB software. Neural network structures had one hidden layer with the number of neurons being approximately between 5 and 15 neurons. The best developed neural networks with one hidden layer and ten neurons could accurately predict the hearing loss threshold with RMSE = 2.6 dB and R(2) = 0.89. The results also confirmed that neural networks could provide more accurate predictions than multiple regressions. Since occupational hearing loss is frequently non-curable, results of accurate prediction can be used by occupational health experts to modify and improve noise exposure conditions.

Exposure potential to neutrons of the Brazilian workers

International Nuclear Information System (INIS)

Martins, Marcelo M.; Almeida, Carlos E. de

1995-01-01

Nowadays, there are 222 neutron radioactive sources registered in use in Brazil, in addition to several neutron fields, power and research reactors and neutron generators. Secondary neutron fields can also be generated in particle accelerators by nuclear reactions with its shielding, the experimental set up and the conversion target. These neutron fields are very different, not only in their spectra but also in their fluences. Around 200 radiation workers are monthly monitored since 1983 by an albedo system. Of the evaluated dosimeters 4% only have shown neutron doses, being 13 mSv the maximum measured value. Most of these doses were received by workers of the oil-well logging and research activities users of 241 Am-Be sources. (author). 7 refs., 3 tabs

"Arubaito," or Short-Term Working Abroad in Japan: A Case Study of Brazilian University Students of Japanese Descent

Science.gov (United States)

Sasaki, Lindsey

2012-01-01

International migration between Japan and Brazil dates back to 1908, when the first group of Japanese migrated to Brazil. However, in the 1980s, a reverse flow occurred, as thousands of Brazilians of Japanese descent traveled to Japan to work in manufacturing and construction factories ("dekasegi" workers). Japanese Brazilians up until…

Urine mutagenicity of steel workers exposed to coke oven emissions

Energy Technology Data Exchange (ETDEWEB)

De Meo, M.P.; Dumenil, G.; Botta, A.H.; Laget, M.; Zabaloueff, V.; Mathias, A.

1987-03-01

Urine mutagenicity of 19 individuals was investigated at a steel mill. All the subjects worked on the coal processing unit. Urine samples were collected at the end of a working day. Urine samples of two exposed workers were collected at the end of two periods of rest and two periods of working. Mutagens were extracted on XAD-2 resin and tested by the Salmonella microsomal assay and the SOS spot test. Mutagenic potencies of exposed smokers and exposed non-smokers were 8.62 +/- 6.56 and 1.1 +/- 0.48 revertants/mg creatinine respectively with Salmonella typhimurium strain TA98 + S9. Both values were significantly higher than those of unexposed smokers and non-smokers (5.07 +/- 3.33 and 0.47 +/- 0.72 revertants/mg creatinine respectively). The urinary mutagenic potency of the two exposed individuals increased at the end of periods of working (15.97 +/- 2.57 revertants/mg creatinine) and decreased at the end of periods of rest (12.31 +/- 2.45 revertants/mg creatinine). Urinary mutagens were detected with S. typhimurium strain TA100 + S9 to a lesser extent. No direct-acting mutagens were detected by the SOS spot test. Atmospheric benzo(a)pyrene (BaP) were also measured by h.p.l.c. on the coke battery. BaP concentrations ranged between 0.01 and 0.6 microgram/m3 air at the different working sites. Biological monitoring with short-term tests is discussed.

[Demographic, socioeconomic, and health profile of working and non-working Brazilian children and adolescents: an analysis of inequalities].

Science.gov (United States)

Miquilin, Isabella de Oliveira Campos; Marín-León, Leticia; Luz, Verônica Gronau; La-Rotta, Ehideé Isabel Gómez; Corrêa Filho, Heleno Rodrigues

2015-09-01

The objectives of this study were to describe the work done by Brazilian children and adolescents and compare the socioeconomic and health profile of those that worked (or were looking for work) versus non-working youngsters. Based on the 2008 Brazilian National Sample Household Survey (PNAD/2008), we selected children and adolescents 5 to 17 years of age, divided into two analytical categories: "workers" (working or looking for employment) and "non-workers". We calculated prevalence rates for the characteristics of their main work, as well as socioeconomic and health variables comparing the two categories. Poisson regression was used to estimate prevalence ratios, adjusted by health characteristics, with "non-workers" as the reference category. Compared to "non-workers", the "workers" category was associated with a higher proportion of boys; age 14 to 17 years; black or brown skin color; lower school attendance; and worse housing conditions. Child labor was associated with worse self-rated health; chronic backache; arthritis or rheumatism; and depression. Effective policies to support families need to be strengthened to effectively fight child labor.

The Brazilian Public Health in Contemporary Capitalism.

Science.gov (United States)

Junqueira, Virgínia; Mendes, Áquilas N

2018-01-01

This article examines some political and economic facts that led to an intensification of austerity measures by the Brazilian government, including ones against the Unified Health System (SUS) and its progressive dismantling. In a country where fundamental human rights were never fully respected, nowadays social and labor rights are under severe attacks. The deepening of the capital crisis and the rise of interest-bearing capital dominance have been causing unemployment, social insecurity growth, and resulting public fund appropriation by the private capital. The Brazilian governments in the 1990s and 2000s have implemented deeper cuts in social policy expenditure, freezing security benefits, privatizing services, and prioritizing the payment of public debt interests. The right wing's project involves the demoralization of not only the Workers' Party but also the left as a whole, so that the adoption of austerity measures could be achieved without popular resistance. It is the duty of the Brazilian left wing to denounce such a project and to provoke firm initiatives to rebuild its bonds with the working class.

Job stress is associated with migraine in current workers: the Brazilian Longitudinal Study of Adult Health (ELSA-Brasil).

Science.gov (United States)

Santos, I S; Griep, R H; Alves, M G M; Goulart, A C; Lotufo, P A; Barreto, S M; Chor, D; Benseñor, I M

2014-10-01

Migraine is an important source of social burden and work-related costs. Studies addressing the association of migraine with job stress are rare. The aim of this paper was to study the association of job stress components and migraine using structured, validated questionnaires that were part of the Brazilian Longitudinal Study of Adult Health (ELSA-Brasil). The ELSA-Brasil is a multicentre cohort of 15,105 civil servants (12,096 current workers) in Brazil. Job strain was assessed using the 17-item Brazilian version of the Swedish Demand-Control-Support Questionnaire. Headache episodes in the preceding 12 months were assessed using a questionnaire based on the International Headache Society criteria. We analysed the association between job stress domains and migraine in men and women using adjusted logistic regression and interaction models. We included 3113 individuals without headache and 3259 migraineurs. Low job control [odds ratio (OR) 1.30; 95% confidence interval (95% CI) 1.10-1.53], high job demands (OR 1.37; 95% CI 1.18-1.59) and low social support (OR 1.49; 95% CI 1.29-1.71) were associated with migraine. Job control was more strongly associated with migraine in women (p for interaction = 0.02). High-strain (high demand and low control) jobs were associated with migraine in both men (OR 1.48; 95% CI 1.11-1.97) and women (OR 1.51; 95% CI 1.17-1.95). We observed a strong association between high-strain jobs and migraine. Job control was a stronger migraine-related factor for women. Low social support was associated with migraine in both sexes. © 2014 European Pain Federation - EFIC®

[Labor rights and the organization of workers in a context of change in labor relations: effects on health workers].

Science.gov (United States)

Pessanha, Elina Gonçalves da Fonte; Artur, Karen

2013-06-01

This paper presents the main institutional changes in labor relations in Brazil, highlighting their impact on the organization of workers. A more recent central change is the regulation of outsourcing by the Labor Judiciary. Research into claims in the Superior Labor Court, guidelines from the Labor Prosecution Office, and trade union lawsuits, show that outsourcing and working hours are subjects which have directly affected health workers. By addressing the institutional principles of justice in contracts, it was concluded that labor reform should deal with the inequality of rights that have characterized the Brazilian labor market.

Adaptation of the Brazilian version of the Utrecht Work Engagement Scale

NARCIS (Netherlands)

Souza Vasquez, A; Dos Santos, E; Paico, E; Hurtz, C; Schaufeli, W.B.|info:eu-repo/dai/nl/073779563

2015-01-01

Engagement at work is a positive mental and dispositional state characterized by Vigor, Dedication and Concentration. The aim of this study was to adapt and get evidence of validity for the Brazilian version of the utrecht work engagement scale (UWES). Participated in the study 1167 workers between

Adaptation and Validation of the Brazilian Version of the Utrecht Work Engagement Scale

OpenAIRE

Vazquez, Ana Claudia Souza; Magnan, Emília dos Santos; Pacico, Juliana Cerentini; Hutz, Claudio Simon; Schaufeli, Wilmar B.

2015-01-01

Engagement at work is a positive mental and dispositional state characterized by Vigor, Dedication and Concentration. The aim of this study was to adapt and get evidence of validity for the Brazilian version of the utrecht work engagement scale (UWES). Participated in the study 1167 workers between 18 and 70 years (M = 36.8, SD = 10.3) in the Brazilian regions. Studies to establish content and construct validity with the 17- item and the 9- item scales were performed. Exploratory and confirma...

Occupational Heat Stress Impacts on Health and Productivity in a Steel Industry in Southern India.

Science.gov (United States)

Krishnamurthy, Manikandan; Ramalingam, Paramesh; Perumal, Kumaravel; Kamalakannan, Latha Perumal; Chinnadurai, Jeremiah; Shanmugam, Rekha; Srinivasan, Krishnan; Venugopal, Vidhya

2017-03-01

Workers laboring in steel industries in tropical settings with high ambient temperatures are subjected to thermally stressful environments that can create well-known risks of heat-related illnesses and limit workers' productivity. A cross-sectional study undertaken in a steel industry in a city nicknamed "Steel City" in Southern India assessed thermal stress by wet bulb globe temperature (WBGT) and level of dehydration from urine color and urine specific gravity. A structured questionnaire captured self-reported heat-related health symptoms of workers. Some 90% WBGT measurements were higher than recommended threshold limit values (27.2-41.7°C) for heavy and moderate workloads and radiational heat from processes were very high in blooming-mill/coke-oven (67.6°C globe temperature). Widespread heat-related health concerns were prevalent among workers, including excessive sweating, fatigue, and tiredness reported by 50% workers. Productivity loss was significantly reported high in workers with direct heat exposures compared to those with indirect heat exposures (χ 2  = 26.1258, degrees of freedom = 1, p  industries enhancing welfare facilities and designing control interventions, further physiological studies with a seasonal approach and interventional studies are needed to strengthen evidence for developing comprehensive policies to protect workers employed in high heat industries.

Prevalence and duration of social security benefits allowed to workers with asthma in Brazil in 2008.

Science.gov (United States)

Branco, Anadergh Barbosa de Abreu; Ildefonso, Simone de Andrade Goulart

2012-01-01

To determine the prevalence and duration of social security benefits (SSBs) claims to registered workers with asthma in Brazil by the Brazilian National Institute of Social Security in 2008. This was a retrospective, descriptive study, based on information obtained from the Brazilian Unified Benefit System database, on the number of SSB claims granted to registered workers with asthma in 2008. The reference population was the monthly mean number of workers registered in the Brazilian Social Registry Database in 2008. The variables studied were type of economic activity, gender, age, and type/duration of the SSB claim. The relationship between work and asthma was evaluated by the prevalence ratio (PR) between work-related and non-work-related SSB claims for asthma. In 2008, 2,483 SSB claims were granted for asthma, with a prevalence of 7.5 allowances per 100,000 registered workers. The prevalence was higher among females than among males (PR = 2.1 between the sexes). Workers > 40 years of age were 2.5 times more likely to be granted an SSB claim for asthma than were younger workers. The prevalence was highest among workers engaged in the following types of economic activity: sewage, wood and wood product manufacturing, and furniture manufacturing (78.8, 22.4, and 22.2 claims/100,000 registered workers, respectively). The median (interquartile range) duration of SSB claims for asthma was 49 (28-87) days. Asthma is a major cause of sick leave, and its etiology has a strong occupational component. This has a major impact on employers, employees, and the social security system. Being female, being > 40 years of age, and working in the areas of urban sanitation/sewage, wood and wood product manufacturing, and furniture manufacturing increase the chance of sick leave due to asthma.

An Analysis of the Sources of Earnings Variation among Brazilian Males.

Science.gov (United States)

Dabos, Marcelo, Psacharopoulos, George

1991-01-01

Uses 1980 Brazilian census data to analyze sources of earnings variations, emphasizing the role of education, labor segmentation, geographic location, and sector of economic activity. Results indicate a sizable rate of return to investment in education across labor market segments, especially among rural and self-employed workers. Internal…

Lifestyle factors, direct and indirect costs for a Brazilian airline company

NARCIS (Netherlands)

F.M. Rabacow (Fabiana Maluf); O. Do Carmo Luiz (Olinda); A.M. Malik (Ana Maria); A. Burdorf (Alex)

2014-01-01

textabstractObjective: To analyze lifestyle risk factors related to direct healthcare costs and the indirect costs due to sick leave among workers of an airline company in Brazil. Methods: In this longitudinal 12-month study of 2,201 employees of a Brazilian airline company, the costs of sick leave

Psychosocial Hazard Analysis in a Heterogeneous Workforce: Determinants of Work Stress in Blue- and White-Collar Workers of the European Steel Industry.

Science.gov (United States)

Metzler, Yannick Arnold; Bellingrath, Silja

2017-01-01

The European steel industry's workforce is highly heterogeneous and consists of various occupational groups, presumably facing different psychosocial stressors. The few existing studies on the subject mainly focused on physical constraints of blue-collar workers, whereas the supposable psychosocial workload received only little research attention. This is remarkable considering the challenges associated with statutory required risk assessment of psychosocial hazards. Valid measures of hazard analysis must account for various stressors and reliably identify them, also between occupational groups. The present study, based on a sample of blue- and white-collar workers ( N  = 124) from the European steel industry, aims to provide a first insight into psychosocial stressors and strain at work in this rarely researched industrial sector. Furthermore, two well-known theoretical roadmaps in job analysis are examined regarding their utility for risk assessment in heterogeneous workforces: the German standard version of the Copenhagen Psychosocial Questionnaire (COPSOQ) and the short version of the effort-reward imbalance questionnaire. Hierarchical multiple regression analyses revealed that the COPSOQ was better suited to predict various strain indices in the present sample. Especially stressors relating to socioemotional aspects, such as work-privacy conflict, revealed a reasonable impact, indicating the need for comprehensive solutions at the organizational level instead of solutions focusing on single workplaces. To conclude, a broadly diversified and validated approach in psychosocial risk assessment is needed to adequately assess the variety of psychosocial factors at work and in different occupational groups.

Lifestyle factors, direct and indirect costs for a Brazilian airline company

Science.gov (United States)

Rabacow, Fabiana Maluf; Luiz, Olinda do Carmo; Malik, Ana Maria; Burdorf, Alex

2014-01-01

OBJECTIVE To analyze lifestyle risk factors related to direct healthcare costs and the indirect costs due to sick leave among workers of an airline company in Brazil. METHODS In this longitudinal 12-month study of 2,201 employees of a Brazilian airline company, the costs of sick leave and healthcare were the primary outcomes of interest. Information on the independent variables, such as gender, age, educational level, type of work, stress, and lifestyle-related factors (body mass index, physical activity, and smoking), was collected using a questionnaire on enrolment in the study. Data on sick leave days were available from the company register, and data on healthcare costs were obtained from insurance records. Multivariate linear regression analysis was used to investigate the association between direct and indirect healthcare costs with sociodemographic, work, and lifestyle-related factors. RESULTS Over the 12-month study period, the average direct healthcare expenditure per worker was US$505.00 and the average indirect cost because of sick leave was US$249.00 per worker. Direct costs were more than twice the indirect costs and both were higher in women. Body mass index was a determinant of direct costs and smoking was a determinant of indirect costs. CONCLUSIONS Obesity and smoking among workers in a Brazilian airline company were associated with increased health costs. Therefore, promoting a healthy diet, physical activity, and anti-tobacco campaigns are important targets for health promotion in this study population. PMID:26039398

Lifestyle factors, direct and indirect costs for a Brazilian airline company.

Science.gov (United States)

Rabacow, Fabiana Maluf; Luiz, Olinda do Carmo; Malik, Ana Maria; Burdorf, Alex

2014-12-01

OBJECTIVE To analyze lifestyle risk factors related to direct healthcare costs and the indirect costs due to sick leave among workers of an airline company in Brazil. METHODS In this longitudinal 12-month study of 2,201 employees of a Brazilian airline company, the costs of sick leave and healthcare were the primary outcomes of interest. Information on the independent variables, such as gender, age, educational level, type of work, stress, and lifestyle-related factors (body mass index, physical activity, and smoking), was collected using a questionnaire on enrolment in the study. Data on sick leave days were available from the company register, and data on healthcare costs were obtained from insurance records. Multivariate linear regression analysis was used to investigate the association between direct and indirect healthcare costs with sociodemographic, work, and lifestyle-related factors. RESULTS Over the 12-month study period, the average direct healthcare expenditure per worker was US$505.00 and the average indirect cost because of sick leave was US$249.00 per worker. Direct costs were more than twice the indirect costs and both were higher in women. Body mass index was a determinant of direct costs and smoking was a determinant of indirect costs. CONCLUSIONS Obesity and smoking among workers in a Brazilian airline company were associated with increased health costs. Therefore, promoting a healthy diet, physical activity, and anti-tobacco campaigns are important targets for health promotion in this study population.

Lifestyle factors, direct and indirect costs for a Brazilian airline company

Directory of Open Access Journals (Sweden)

Fabiana Maluf Rabacow

2014-12-01

Full Text Available OBJECTIVE To analyze lifestyle risk factors related to direct healthcare costs and the indirect costs due to sick leave among workers of an airline company in Brazil. METHODS In this longitudinal 12-month study of 2,201 employees of a Brazilian airline company, the costs of sick leave and healthcare were the primary outcomes of interest. Information on the independent variables, such as gender, age, educational level, type of work, stress, and lifestyle-related factors (body mass index, physical activity, and smoking, was collected using a questionnaire on enrolment in the study. Data on sick leave days were available from the company register, and data on healthcare costs were obtained from insurance records. Multivariate linear regression analysis was used to investigate the association between direct and indirect healthcare costs with sociodemographic, work, and lifestyle-related factors. RESULTS Over the 12-month study period, the average direct healthcare expenditure per worker was US$505.00 and the average indirect cost because of sick leave was US$249.00 per worker. Direct costs were more than twice the indirect costs and both were higher in women. Body mass index was a determinant of direct costs and smoking was a determinant of indirect costs. CONCLUSIONS Obesity and smoking among workers in a Brazilian airline company were associated with increased health costs. Therefore, promoting a healthy diet, physical activity, and anti-tobacco campaigns are important targets for health promotion in this study population.

DNA adduct formation among workers in a Thai industrial estate and nearby residents

International Nuclear Information System (INIS)

Peluso, Marco; Srivatanakul, Petcharin; Munnia, Armelle; Jedpiyawongse, Adisorn; Meunier, Aurelie; Sangrajrang, Suleeporn; Piro, Sara; Ceppi, Marcello; Boffetta, Paolo

2008-01-01

The genotoxic effects of air pollutant exposures have been studied in people living and working in Map Ta Phut, Rayong province, Thailand, a site where is located the Map Ta Phut Industrial Estate (MIE) one of the largest steel, refinery and petrochemical complex in the South-Eastern Asia. This was done by the conduction of a transversal study aimed to compare the prevalence of bulky DNA adducts in groups of subjects experiencing various degree of air pollution. DNA adduct analysis was performed in the leukocytes of 201 volunteers by the 32 P-postlabelling assay: 79 were workers in the MIE complex, including 24 refinery workers, 40 steel workers and 15 tinplate workers, 72 were people residing downwind in the MIE area and 50 were residents in a control district of the same Rayong province but without industrial exposures. The groups of workers were analyzed separately to evaluate if DNA adduct formation differs by the type of industry. The levels of bulky DNA adducts were 1.17 ± 0.17 (SE) adducts/10 8 nucleotides in refinery workers, 1.19 ± 0.19 (SE) in steel workers, 0.87 ± 0.17 (SE) in tinplate workers, 0.85 ± 0.07 (SE) in MIE residents and 0.53 ± 0.05 (SE) in district controls. No effects of smoking habits on DNA adducts was found. The multivariate regression analysis shows that the levels of DNA adducts were significantly increased among the individuals living near the MIE industrial complex in respect to those resident in a control district (p < 0.05). In the groups of occupationally exposed workers, the highest levels of DNA adducts were found among the workers experiencing an occupational exposure to polycyclic aromatic hydrocarbons, e.g. the steel factory and refinery workers. When we have evaluated if the levels of DNA adducts of the PAH exposed workers were different from those of the MIE residents, a statistical significantly difference was found (p < 0.05). Our present study indicates that people living near point sources of industrial air

Risk of WMSDs in monofunctional and multifunctional workers in a Brazilian footwear company

Directory of Open Access Journals (Sweden)

Wilza Karla dos Santos Leite

Full Text Available Abstract This study aimed to analyze the risk of musculoskeletal disorders in monofunctional and multifunctional workers in a footwear company. The sample comprised 114 workers in the shoe production sector. The method Occupational Repetitive Actions was used to assess the risk of work-related musculoskeletal disorders (WMSDs. Proportional odds models were constructed, relating the risk of WMSDs to the type of work and the worker’s level of multifunctionality. For monofunctional workers, exposure to the higher risk was related to cycle time and the technical actions within their activities, whereas for multifunctional workers, it was related to the range of motion, use of gloves and precision needed in activities. For monofunctional workers, greater risks were associated with a short activity cycle, whereas for multifunctional workers, they were associated with complementary and organizational factors. Moreover, workers whose intracellular activities were less than 30% of the total appeared to be less exposed to the risk of WMSDs.

Risk perception of workers at nuclear power plants from Angra dos Reis, Rio de Janeiro State: preliminary study of a reality on health

International Nuclear Information System (INIS)

Scliar, Claudio; Vasconcelos, Ana S.F.; Rodrigues, Anacely S.; Santos, Gloria R.R.; Albuquerque, Patricia O.; Carvalho, Sirlene L.A.; Oliveira, Simone

1999-01-01

The present paper analyses some social and occupational parameters that may have an influence on the risk perception levels of the workers in Brazilian Nuclear Power pLants, emphasizing possible relationship between the specificity of job tasks/literacy and risk perception. This study was based on two findings from the scientific literature: risk perception increases proportionally with literacy; risk perception decreases proportionally with the specificity of job tasks. The results of this pilot study indicates that risk perception levels of the workers in Brazilian Nuclear Power Plants increases proportionally with the literacy and specificity of their job tasks, contrasting with the american and european profiles. These results appears as a singular reality of those workers and the possibility of a new regard over the management and decision making process in the Brazilian Nuclear Power Plants. (author)

Occupational musculoskeletal and mental disorders as the most frequent associations to worker's sickness absence: a 10-year cohort study.

Science.gov (United States)

Zechinatti, Antonio Carlos; Belloti, João Carlos; de Moraes, Vinícius Ynoe; Albertoni, Walter Manna

2012-05-11

Sickness absence (SA) is a complex phenomenon influenced by the health of the worker and socio-economic factors. An epidemiological study of SA has never been conducted for Brazilian university workers. This study aimed to determine the main diseases that are associated with SA and find out the average length of SA duration, and its variation among different staff members and between sexes over the 10-year study period. We identified the main diseases responsible for SA in workers at a Brazilian federal university (UNIFESP) from January 1998 to August 2008 and grouped them according to the International Classification of Diseases (ICD10). Independent researchers assessed data collected from expert reports of the university Worker's Health Division. During the period of our study, 1176 workers experienced sickness absence. After evaluating 7579 consultations, ICD10 distribution showed that musculoskeletal and connective tissue disorders ("M" axis) and mental and behavioral diseases ("F" axis) were the most important causes of SA, occurring in 47.3% (IC 95%; 44.15-49.8) of workers aged 46.2 (SD 10.1) years. Female workers represented 78.1% (IC 95%; 76-80.7) of all workers with SA, but men had higher proportional rates (Chi-square; p = 0.044). Longer SA periods were observed for illnesses related to neoplasms and infectious diseases. Musculoskeletal and connective tissue disorders and mental and behavioral diseases were the most frequent cause of sickness absence. Men had an increased frequency of SA, and neoplasms and infectious disorders were associated with longer absences. Mostly, these are occupational disorders. A preventative research-focused agenda is desirable for a more accurate depiction of this population in the scope of policy-making. Our results for SA in Brazilian workers correspond with those of other studies worldwide.

Solubility and diffusivity of hydrogen in enameling steel

Energy Technology Data Exchange (ETDEWEB)

De Gregorio, P.; Valentini, R.; Solina, A.; Gastaldo, F. (Centro Sviluppo Materiali, Rome (Italy) Pisa Univ. (Italy). Dip. di Ingegneria Chimica, Chimica Industriale e Scienza dei Materiali)

1991-06-01

In recent years, continuous casting has almost expelled conventional ingot casting from the steel-making process by its much higher productivity. However, enameling steel sheets doesn't give the steel sufficient resistance to fishscale, as that which is achieved by the inclusions in case of ingot capped steel. Fishscales are caused by hydrogen gas building up pressure at the interface between enamel and steel, resulting in the rupture of enamel. Object of this study, was not only to correlate fishscale susceptibility with metallurgical parameters, but to define the effect of reversible and irreversible traps on hydrogen solubility and diffusivity in enameling steel. Hydrogen permeation was studied, in low carbon enameling steel, with an electrochemical technique developed by Devanathan and co-workers. This method was used to calculate concentrations of irreversibly adsorbed hydrogen and evaluate hydrogen diffusion coefficients. The results on reversible traps correlated with micro-voids formations around the carbide precipitate, while the irreversible traps correlated with inclusions and precipitate content.

Study of API 5L X70 steel corrosion processes when in contact with some Brazilian soils

International Nuclear Information System (INIS)

Jesus, Sergio Luis de

2007-01-01

Pipelines, fuel storage tanks and other metallic structures are in permanent contact and exposed to different types of soils, of horizons or layers, or of soil aggressiveness. This interaction may cause expressive damages to the environment and to the planned work. Contamination may occur due to leakage of stored products, splitting during transportation, accidents caused by pipelines without extensive maintenance. The result of these accidents could be, among others, some financial losses. In order to recognize the dynamic interactions between metallic surfaces and the environment it is crucial to have preventive actions and to develop better-applied materials. API steel 5L X70 has been used in structures of low and high pressure with high mechanical strength and corrosion and, even so, it is susceptible to etching corrosion since it is in contact with different environments from mangrove regions to industrial environments. The present case evaluated the role of 5L X70 API steel in contact with different soil horizons representative of the Brazilian soil. This investigation correlated chemical species with solute ions in soil solution, secondary and primary phase minerals besides physical and chemical characteristics as pH, electric conductivity, total dissolved solids, among others, to the results of corrosion resistance and ways of corrosion. The evaluation was carried out using x-ray diffractometry, scanning electron microscopy, total reflection x-ray fluorescence, fuel injection flow besides texture and gravimetric analyses to soil characterization and mineralogy, identification of corrosion products, soil solution analyses, evaluation of tested materials and classification of ways and types of corrosion. This was an attempt to integrate the data to a better understanding of the process involving reagents and products. The results showed that different soil horizons such as different types of analyzed soils produce specific etching in metallic structures

Transport of radioactive source of cobalt-60 for the steel industry

International Nuclear Information System (INIS)

Santos, Paulo de Oliveira

2009-01-01

Radioactive materials are used in the fields of medicine, industry, research and nuclear power production. The use of radioactive material may involve transportation and this implies in the application of safety measures to the workers, public and the environment. Many types of radioactive material are produced all over the world and some modes of transport are involved. The IAEA regulations are based on the philosophy that radioactive material being transported should be adequately packaged to provide protection against the hazards of the material under all conditions of transport. Some Brazilian steel industries control the levels of liquid steel in continuous casting systems by means of sealed sources of cobalt-60. The Center for Development of Nuclear Technology-CDNT produces several of these sources to meet these industries and these sources must be transported in packages designed and tested as requirements of the rules of carriage of radioactive materials. For the transportation of seven sources of cobalt-60 with total activity of 1 GBq since CDNT to the applicant industries was designed, built and tested a Type A package. The thickness of the shield to meet the surface dose rate and the index of transport was calculated by MCNP (Monte Carlo N-Particle Transport Code-Version 5) and practical values were compatible. The sealed sources of cobalt-60 were tested as to leak through the tightness test conducted according to ISO 9978:1992 (E) and the tests to demonstrate the capability of resistance of packaged under normal conditions of transport were made on the facilities of CDNT. (author)

DNA adduct formation among workers in a Thai industrial estate and nearby residents.

Science.gov (United States)

Peluso, Marco; Srivatanakul, Petcharin; Munnia, Armelle; Jedpiyawongse, Adisorn; Meunier, Aurelie; Sangrajrang, Suleeporn; Piro, Sara; Ceppi, Marcello; Boffetta, Paolo

2008-01-25

The genotoxic effects of air pollutant exposures have been studied in people living and working in Map Ta Phut, Rayong province, Thailand, a site where is located the Map Ta Phut Industrial Estate (MIE) one of the largest steel, refinery and petrochemical complex in the South-Eastern Asia. This was done by the conduction of a transversal study aimed to compare the prevalence of bulky DNA adducts in groups of subjects experiencing various degree of air pollution. DNA adduct analysis was performed in the leukocytes of 201 volunteers by the (32)P-postlabelling assay: 79 were workers in the MIE complex, including 24 refinery workers, 40 steel workers and 15 tinplate workers, 72 were people residing downwind in the MIE area and 50 were residents in a control district of the same Rayong province but without industrial exposures. The groups of workers were analyzed separately to evaluate if DNA adduct formation differs by the type of industry. The levels of bulky DNA adducts were 1.17+/-0.17 (SE) adducts/10(8) nucleotides in refinery workers, 1.19+/-0.19 (SE) in steel workers, 0.87+/-0.17 (SE) in tinplate workers, 0.85+/-0.07 (SE) in MIE residents and 0.53+/-0.05 (SE) in district controls. No effects of smoking habits on DNA adducts was found. The multivariate regression analysis shows that the levels of DNA adducts were significantly increased among the individuals living near the MIE industrial complex in respect to those resident in a control district (pindustrial air pollution can experiment an excess of DNA adduct formation. The emissions from the MIE complex are the main source of air pollution in this area and can be the cause of such increment in the levels of DNA damage.

Study on ionizing radiation to the workers' lymphocyte micronucleus rate and chromosome aberrations

International Nuclear Information System (INIS)

Li Jianhua; Wang Linchao; He Wei

2007-01-01

Objective: To study lymphocyte genetic material of an iron and steel enterprise workers exposed to the ionizing radiation, find out measures to protect their health and reduce ionizing radiation occupation harm. Methods: 342 workers were choseh as the exposed group who worked in an iron and steel enterprise in the beam installment operation, to examine their circumference blood lymphocyte micronucleus rate and the chromosome aberrations, simultaneously select 280 chefs as the control group, The irradiation dosage was determined and statistical analysis was carded out wich the consideration of their length of work and differences in work post. Results: Exposed group: the micronucleus rate masculine gender (MNR), 4 people, the masculine gender pick out rate is 12.87%. The chromosome aberration factor masculine gender (CAF), 12 people, the masculine rate is 3.51%. Control group: MNR 3 people, the asculine gender pick out rate is 1.07%; CAF 2 people, masculine gender rate is 0.72%. Comparing the two groups, every item has the significant difference. Workers in is the exposed group workers have the average exposure dose of 6.73mSv/a, MNR,CAF are illuminated to the dosage have a positive line correlation. They become increased as the job lenght prolongs. The nucleon name, the material calculation and the medical X-radial are responsible for the highest ratio. Conclusion: In iron and steel enterprises, long-time ionizing radiation can cause the workers' circumference blood lymphocyte micronucleus rate and the chromosome aberrations obvious to rise. The beam protection measures strengthened so as to reduce the harms to workers. (authors)

Radiation protection in the Brazilian universities

International Nuclear Information System (INIS)

Caballero, K.C.S.; Borges, J.C.

1994-01-01

A research covering 91 institutions was undertaken in order to elucidate how radiation protection were indeed fulfilled. A questionary including technical administrative and legal subjects was sent by mail and 36% of which were answered propitiating substantial data for analysis. Only in few cases universities have knowledge of basic procedures in radiation protection, claiming for the elaboration of a plan that could guide supervisors and workers in radiation protection in these institution. Based on the tree analysis technique proposed by IAEA, a Reference Radiation protection Program has been elaborated and proposed for Brazilian universities. (author). 14 refs, 1 figs

Assessment of Air Pollution and its Effects on Health of Workers of Steel Re-Rolling Mills in Hyderabad

Directory of Open Access Journals (Sweden)

Altaf Alam Noonari

2016-04-01

Full Text Available The SRRMs (Steel Re-Rolling Mills are being releasing air pollutants in the environment. In order to evaluate their effect on the health of the workers, health and safety issues were analyzed by first measuring the concentrations of SO x (OIxides of Sulphur, NO x (Oxides of Nitrogen, CO (Carbon Monoxide and O2 (Oxygen produced in the three SRRMs located in SITE area Hyderabad. The mean concentration of SO x , NO x and CO were in the order of 0.35, 0.280, 6.333 ppm, respectively, whereas the mean concentration of O 2 was 203.53 thousand ppm. As per results, the concentration ofair pollutants, including SOx and NO x were significantly higher than to the NEQS (National Environmental Quality Standards and NAAQS (National Ambient Air Quality Standards. The concentration ofCO was lower than to the NAAQS, but higher than to the NEQs, while the concentration of O2 was slightly lower than to the standard value. The workers who were exposed to these air pollutants are being suffering from chronic diseases related to breathing and allergies. Moreover, labour staff was lifting heavy loads manually, which causes them to muscular and joint problems. In all the SRRMs under study, the electrical and mechanical equipments were used without any safety. The MSDS were not displayed on the workstations, the housekeeping was inadequate and most of the workers were performing their jobs without personal protective equipment. In addition to these, the other serious issues related to the occupational health and safety were an unhygienic supply of water, higher noise level, placement of explosive cylinders in the open atmosphere and unavailability of the first aid facilities in the Mill premises.

Respiratory risks in broiler production workers

Directory of Open Access Journals (Sweden)

M do CB de Alencar

2004-03-01

Full Text Available There are many situations that involve health risks to the Brazilian rural worker, and animal production is just one of them. Inhalation of organic dust, which has many microorganisms, leads in general to respiratory allergic reactions in some individuals, "asthma-like syndrome", and mucous membrane inflammation syndrome, that is a complex of nasal, eye, and throat complaints. Furthermore, workers might have farmer's hypersensitivity pneumonia, that is a respiratory health risk along the years. The objective of this study was to evaluate the potential pulmonary health risks in poultry production workers in the region of Curitiba, PR, Brazil. Interviews using a pre-elaborated questionnaire with 40 questions were made with 37 broiler production workers, which were submitted to a pulmonary function test. Results of restrictive function with lower FEV1 (the maximum respiratory potential, the forced expiratory volume in the first second of exhalation and FVC (forced vital capacity represented 24.32% of the total of workers, and severe obstruction represented 2.70%. Other symptoms were found in 67.57% of the workers as well. The results showed that those who work more than 4 years and within more than one poultry house, exceeding 5 hours per day of work, presented higher pulmonary health risks. It is concluded that the activities within broiler houses may induce allergic respiratory reaction in workers. The use of IPE (individual protection equipment besides special attention to the air quality inside the housing may be advised in a preventive way.

Health and Safety at Work: Analysis from the Brazilian Documentary Film Flesh and Bone.

Science.gov (United States)

Mendes, Luciano; Dos Santos, Heliani Berlato; Ichikawa, Elisa Yoshie

2017-12-01

The objective of this article is to make some analysis on the process of work and accidents occurring in slaughterhouses, evidenced in the Brazilian documentary film called Flesh and Bone . As such, it was necessary to discuss an alternative theoretical concept in relation to theories about health and safety at work. This alternative discussion focuses on the concepts of biopower and biopolitics. The use of audiovisual elements in research is not new, and there is already a branch of studies with methodological and epistemological variations. The Brazilian documentary Flesh and Bone was the basis for the research. The analysis of this documentary will be carried out from two complementary perspectives: "textual analysis" and "discourse analysis." Flesh and Bone presents problems related to health and safety at work in slaughterhouses because of the constant exposure of workers to knives, saws, and other sharp instruments in the workplace. The results show that in favor of higher production levels, increased overseas market sales, and stricter quality controls, some manufacturers resort to various practices that often result in serious injuries, disposal, and health damages to workers. Flesh and Bone , by itself, makes this explicit in the form of denunciation based on the situation of these workers. What it does not make clear is that, in the context of biopolitics, the actions aimed at solving these problems or even reducing the negative impacts for this group of workers, are not efficient enough to change such practices.

[A cohort study on occupational noise induced hearing loss in workers at an iron and steel plant].

Science.gov (United States)

Yu, S F; Chen, G S; Jiao, J; Gu, G Z; Zhang, H L; Wang, X M; Zhou, W H; Wu, H; Li, Y H; Zheng, Y X

2017-01-06

Objective: To analyze the incidence rate of occupational noise-induced hearing loss in noise-exposed workers in an iron and steel plant from 2006 to 2015. Methods: Using a cohort study method, workers exposed to occupational noise from Jan 1, 2006 to Dec 12, 2015 were followed up and the pure tone hearing test was conducted. In total, 6 297 subjects completed two or more physical checks and the pure tone hearing test and were included in the analysis. The noise exposure level at the workplace and the equivalent continuous A-weighted sound pressure level for workers was monitored and the cumulative noise exposure dose was evaluated. The subjects were divided into low, middle and high exposure groups according to the noise exposure level, and the equivalent continuous A-weighted sound pressure level for 8 hours for each group was 80.6-85.0, 85.1-90.0 and 90.1-103.4 dB (A), respectively. While the RR and 95% CI were derived from unconditional logistic regression models. In logistic regression analysis, confounding factors such as age, gender, smoking habit, drinking habit, high temperature exposure and chemical hazards exposure level were controlled. Results: During the follow-up period, 392 cases of occupational noise-induced hearing loss were diagnosed among the 6 297 subjects, with an incidence rate of 6.23%; 318 cases of high-frequency hearing loss were diagnosed, with an incidence rate of 5.05%; and 74 cases of occupational noise-induced deafness were diagnosed, with an incidence rate of 1.18% . The incidence rates of hearing loss among the high, medium and low exposure groups were 9.22% (158/1 737), 6.49% (204/3 142) and 2.08% (30/1 442), respectively; the rates of high-frequency hearing loss were 7.41% (127/1 737), 5.25% (165/3 142) and 1.80% (26/1 442), respectively; and the rates of occupational noise-induced deafness were 1.81% (31/1 737), 1.24% (39/3 142) and 0.28% (4/1 442), respectively. For the groups corresponding to cumulative noise exposure doses of �

Role of steel wire ropes in mine safety

CSIR Research Space (South Africa)

Peake, A

2008-11-01

Full Text Available Today there are an estimated 2 300 steel wire ropes installed in roughly 200 underground mines in South Africa. These mines employ more than 280 000 workers underground and hoist several millions of tonnes of rock to the surface every month...

78 FR 37584 - U.S. Steel Tubular Products, Inc., Mckeesport Tubular Operations Division, Subsidiary of United...

Science.gov (United States)

2013-06-21

... make the following certification: All workers of U.S. Steel Tubular Products, McKeesport Tubular... Products, Inc., Mckeesport Tubular Operations Division, Subsidiary of United States Steel Corporation, Mckeesport, Pennsylvania; Notice of Amended Certification Pursuant to Section 221 of the Trade Act of 1974...

An assessment of the performance of the immunity system in iron and steel workers exposed to hazardous industrial factors. Pt. 2. Regulation of immuno-deficiencies in iron and steel workers suffering from chronic bronchitis. Die Beurteilung der Leistung des Immunsystems bei Huettenarbeitern unter Einwirkung schaedlicher industrieller Faktoren. T. 2. Regulierung von Immundefiziten bei Erzhuettenarbeitern mit chronischer Bronchitis

Energy Technology Data Exchange (ETDEWEB)

Scheller, S.; Czuba, Z.; Krol, W.; Nikodemowicz, E.; Aleksandrowicz, J.; Zydowicz, G. (Inst. for Microbiology, Medical Academy, Zabrze-Rokitnica (Poland)); Shani, J. (Univ. of South California, School of Pharmacy, Los Angeles, CA (USA)); Malinowska, B. (Sanatorium for Lung Diseases and Tuberculosis, Bystra Slaska (Poland))

1991-05-01

147 iron and steel workers suffering from chronic bronchitis underwent a 24 days climatic treatment. A local antibacterial treatment was empolyed as well as local and systemic regulation of the immunosystem. Significant immuno-deficiencies were found in the patients concerned. EEP in an isotonic saline solution was applied locally by means of inhalations as a remedy with antibacterial and immunotropic effects. The systematic immunotherapy was carried out by administering Propolin tablets, Dolomit, Methindol (Indomethazin), Biostymina, and Decaris (Levamisole). After the treatment we stated a favorable change of several parameters. (orig.).

Esophageal cancer among Brazilian agricultural workers: case-control study based on death certificates.

Science.gov (United States)

Meyer, Armando; Alexandre, Pedro Celso Braga; Chrisman, Juliana de Rezende; Markowitz, Steven B; Koifman, Rosalina Jorge; Koifman, Sergio

2011-03-01

Several studies suggest that agricultural workers are at higher risk to develop and die by certain types of cancer. Esophageal cancer is not commonly listed among these types. However, some recent studies indicated that if there is an association between agricultural working and esophageal cancer, it s more likely to be observed among workers highly exposed to pesticides. In the present study, the magnitude of the association between agricultural working and esophageal cancer mortality was evaluated in a high pesticide use area in Brazil, through a death certificate-based case-control study. Cases were individuals from both genders, 30-59 years old, for whom basic cause of death was ascertained as cancer of the esophagus. For each case, one control was randomly selected from all possible controls for which the basic cause of death was ascertained as different from neoplasm and diseases of the digestive system. In addition, controls matched their cases by sex, age, year of death, and state of residence. Crude and adjusted odds ratios were then calculated to estimate the magnitude of the risk. Results showed that, in general, agricultural workers were at significantly higher risk to die by esophageal cancer, when compared to non-agricultural workers. Stratified analysis also revealed that the magnitude of such risk was slightly higher among illiterate agricultural workers, and simultaneous adjustment for several covariates showed that the risk was quantitatively higher among younger southern agricultural workers. These results suggest the esophageal cancer may be included among those types of cancer etiologically associated to agricultural working. Copyright © 2010 Elsevier GmbH. All rights reserved.

Evaluation of AISI 316L stainless steel welded plates in heavy petroleum environment

International Nuclear Information System (INIS)

Carvalho Silva, Cleiton; Pereira Farias, Jesualdo; Batista de Sant'Ana, Hosiberto

2009-01-01

This work presents the study done on the effect of welding heating cycle on AISI 316L austenitic stainless steel corrosion resistance in a medium containing Brazilian heavy petroleum. AISI 316L stainless steel plates were welded using three levels of welding heat input. Thermal treatments were carried out at two levels of temperatures (200 and 300 deg. C). The period of treatment in all the trials was 30 h. Scanning electronic microscopy (SEM) and analysis of X-rays dispersive energy (EDX) were used to characterize the samples. Weight loss was evaluated to determine the corrosion rate. The results show that welding heating cycle is sufficient to cause susceptibility to corrosion caused by heavy petroleum to the heat affected zone (HAZ) of the AISI 316L austenitic stainless steel

Eating patterns in the Brazilian Longitudinal Study of Adult Health (ELSA-Brasil): an exploratory analysis.

Science.gov (United States)

Cardoso, Letícia de Oliveira; Carvalho, Marilia Sá; Cruz, Oswaldo Gonçalves; Melere, Cristiane; Luft, Vivian Cristine; Molina, Maria Del Carmen Bisi; Faria, Carolina Perim de; Benseñor, Isabela M; Matos, Sheila Maria Alvim; Fonseca, Maria de Jesus Mendes da; Griep, Rosane Harter; Chor, Dóra

2016-01-01

The food consumption of 15,071 public employees was analyzed in six Brazilian cities participating in the baseline for Brazilian Longitudinal Study of Adult Health (ELSA-Brasil, 2008-2010) with the aim of identifying eating patterns and their relationship to socio-demographic variables. Multiple correspondence and cluster analysis were applied. Four patterns were identified, with their respective frequencies: "traditional" (48%); "fruits and vegetables" (25%); "pastry shop" (24%); and "diet/light" (5%) The "traditional" and "pastry shop" patterns were more frequent among men, younger individuals, and those with less schooling. "Fruits and vegetables" and "diet/light" were more frequent in women, older individuals, and those with more schooling. Our findings show the inclusion of new items in the "traditional" pattern and the appearance of the "low sugar/low fat" pattern among the eating habits of Brazilian workers, and signal socio-demographic and regional differences.

[The organization of the comprehensive prevention of urolithiasis among ferrous metallurgy workers].

Science.gov (United States)

Egorova, A M

2009-01-01

The purpose of study is to evaluate the effectiveness of the set of preventive measures as applied to 321 workers of basic ferrous metallurgy specialties (steel makers, mill men, hot metal shearers). During the clinical examination all the workers were divided on three groups: the workers without any pathology (11.83%, the first group), the workers with metabolic disorders only without urolitiasis (64.81%, the second group) and the workers with urolitiasis diagnosis approved by ultrasonography (23.36%, the third group). The effectiveness of rehabilitation measures was evaluated during half a year (diet therapy, drinking regimen, medicinal plants treatment). After the course of preventive measures was applied the overall health condition of most workers ameliorated and the number of workers with urolitiasis development risk factors reliably decreased up to 6-12%.

Carpal tunnel syndrome in the Turkish steel industry.

Science.gov (United States)

Gedizlioglu, Muhtesem; Arpaci, Esra; Cevher, Demet; Ce, Pinar; Kulan, Can Ahmet; Colak, Ilhan; Duzgun, Baran

2008-05-01

Certain occupations are reported to be associated with a high risk for carpal tunnel syndrome (CTS). In this study, we investigated the development of CTS in iron-steel industry workers. Subjects were recruited from a factory of 650 workers and assessed by means of history, physical examination and electrophysiological testing. Seventy-nine subjects from the factory and 53 healthy controls with occupations unrelated to heavy physical work were assessed. None of the worker group had electrophysiological evidence of CTS. One subject in the control group has electrophysiological evidence of CTS. In the worker group, all sensory nerve conduction velocities and ulnar nerve action potential amplitudes in both hands and distal motor latencies were statistically different. In our study, among a group of heavy labourers, no cases of CTS were detected. However, all electrophysiologic parameters of workers were different from controls. Our results point to a diffuse, but subclinical injury of peripheral nerves under heavy physical work conditions, instead of a local effect such as CTS.

Organizational culture of a psychiatric hospital and resilience of nursing workers.

Science.gov (United States)

Rocha, Fernanda Ludmilla Rossi; Gaioli, Cheila Cristina Leonardo de Oliveira; Camelo, Silvia Helena Henriques; Mininel, Vivian Aline; Vegro, Thamiris Cavazzani

2016-01-01

to analyze the organizational culture of a psychiatric hospital and identify the capacity of resilience of nursing workers. quantitative research. For data collection, were used the Brazilian Instrument for Evaluation of Organizational Culture (IBACO - Instrumento Brasileiro para Avaliação da Cultura Organizacional) and the Resilience Scale (RS). participants reported the existence of centralization of power and devaluation of workers, despite recognizing the existence of collaboration at work and practices for improving interpersonal relations. In relation to the capacity of resilience, 50% of workers showed high level, and 42.9% a medium level of resilience. The correlation tests revealed negative values between the IBACO and RS domains, indicating that the lower the appreciation of individuals in the institution, the greater their capacity of resilience. the organizational values reflect the work organization model in the institution that devalues the workers' needs and requires greater capacity of resilience.

76 FR 13665 - Arcelor Mittal, Formerly Known as Mittal Steel Walker Wire, a Subsidiary of Arcelor Mittal...

Science.gov (United States)

2011-03-14

... Known as Mittal Steel Walker Wire, a Subsidiary of Arcelor Mittal--Montreal, Including On-Site Leased... Steel Walker Wire, a subsidiary of Arcelor Mittal-- Montreal, including on-site leased workers from... Walker Wire, Inc., Ferndale, Michigan, separated from employment on or after July 23, 2006 through August...

Eating patterns in the Brazilian Longitudinal Study of Adult Health (ELSA-Brasil: an exploratory analysis

Directory of Open Access Journals (Sweden)

Letícia de Oliveira Cardoso

2016-01-01

Full Text Available Abstract: The food consumption of 15,071 public employees was analyzed in six Brazilian cities participating in the baseline for Brazilian Longitudinal Study of Adult Health (ELSA-Brasil, 2008-2010 with the aim of identifying eating patterns and their relationship to socio-demographic variables. Multiple correspondence and cluster analysis were applied. Four patterns were identified, with their respective frequencies: "traditional" (48%; "fruits and vegetables" (25%; "pastry shop" (24%; and "diet/light" (5% The "traditional" and "pastry shop" patterns were more frequent among men, younger individuals, and those with less schooling. "Fruits and vegetables" and "diet/light" were more frequent in women, older individuals, and those with more schooling. Our findings show the inclusion of new items in the "traditional" pattern and the appearance of the "low sugar/low fat" pattern among the eating habits of Brazilian workers, and signal socio-demographic and regional differences.

[Contexts, impasses and challenges for training Public Health workers in Brazil].

Science.gov (United States)

de Almeida Filho, Naomar Monteiro

2013-06-01

An introductory comment is made on the historical background, institutional impasses and curriculum challenges for training Public Health workers in Brazil. Initially, a thesis is proposed, namely that the Brazilian state has not fulfilled its responsibility to ensure quality public services for the population, with access and equity, shaping "the four perversions of Brazilian education." Secondly, it analyzes the public health system, which is theoretically universal, but being underfunded and with acknowledged shortcomings, contributes to the increase in social exclusion. Lastly, it highlights the need for new models for training people who are technologically competent, suitable for teamwork, creative, autonomous, problem-solving, engaged in health promotion, open to social participation and committed to the humanization of health.

Social participation and drug use in a cohort of Brazilian sex workers.

Science.gov (United States)

Leslie, Hannah Hogan; Ahern, Jennifer; Chinaglia, Magda; Kerrigan, Deanna; Lippman, Sheri A

2013-06-01

Structural interventions focused on community mobilisation to engender an enabling social context have reduced sexual risk behaviours among sex workers. Interventions to date have increased social participation and shown an association between participation and safer sex. Social participation could modify risk for other health behaviours, particularly drug use. We assessed social participation and drug use before and after implementation of a clinical, social and structural intervention with sex workers intended to prevent sexually transmitted infections/HIV infection. We followed 420 sex workers participating in the Encontros intervention in Corumbá, Brazil, between 2003 and 2005. We estimated the association of participation in external social groups with drug use at baseline and follow-up using logistic regression and marginal modelling. Follow-up analyses of preintervention/postintervention change in drug use employed inverse probability weighting to account for censoring and were stratified by exposure to the intervention. Social participation showed a protective association with drug use at baseline (1 SD higher level of social participation associated with 3.8% lower prevalence of drug use, 95% CI -0.1 to 8.3). Among individuals exposed to Encontros, higher social participation was associated with an 8.6% lower level of drug use (95% CI 0.1 to 23.3). No significant association was found among the unexposed. A structural intervention that modified sex workers' social environment, specifically participation in external social groups, was associated with reduced drug use. These findings suggest that sexual risk prevention initiatives that enhance social integration among marginalised populations can produce broad health impacts, including reductions in drug use.

Drug abuse among workers in Brazilian regions Uso de drogas entre trabalhadores de regiões do Brasil

Directory of Open Access Journals (Sweden)

Ovandir Alves Silva

2004-08-01

Full Text Available OBJECTIVE: Many business organizations in Brazil have adopted drug testing programs in the workplace since 1992. Rehabilitation, rather than layoff and disciplinary measures, has been offered as part of the Brazilian employee assistance programs. The purpose study is to profile drug abuse among company workers of different Brazilian geographical regions. METHODS: Urine samples of 12,700 workers from five geographical regions were tested for the most common illicit drugs of abuse in the country: marijuana, cocaine, and amphetamine. Enzyme multiplied immunoassay technique (EMIT and gas chromatography coupled with mass spectrometry (GC/MS were the techniques utilized for urine testing. The distribution of collected urine samples according to geographical regions was: 72.0% southeast, 13.8% northeast, 7.9% south, 5.7% central west and 0.6% north. RESULTS: Of all samples analyzed, 1.8% was found to be positive for drugs: 0.5% from the south region, 1.1% from northeast, 1.2% from central west, 1.3% from north, and 2.2% from southeast. Of these, 59.9% was marijuana, 17.7% cocaine, 14.6% amphetamine, and 7.7% associated drugs. CONCLUSIONS: The distribution of drugs found in the samples shows a regional variation. Marijuana, however, was found in all regions. Cocaine was seen only in central west and southeast regions. Amphetamine was found in northeast, central west, and southeast regions.OBJETIVO: No Brasil, desde 1992, inúmeras empresas comerciais e industriais vêm adotando programas de controle do uso de drogas de abuso no ambiente de trabalho. Nenhuma medida disciplinar ou demissionária é tomada sem antes se tentar a reabilitação do funcionário. O objetivo do estudo é apresentar o perfil do uso de drogas de abuso entre trabalhadores de diferentes empresas brasileiras. MÉTODOS: Amostras de urina de 12.700 indivíduos provenientes das cinco regiões geográficas brasileiras foram analisadas visando à detecção das principais drogas de abuso

The Relationship between Informal Learning, Burn out, Mental Health and Job Satisfaction among Workers of Esfahan Steel Company

Directory of Open Access Journals (Sweden)

mohammad ali nadi

2014-01-01

Full Text Available The purpose of this research is to investigate the relationship between informal learning, job satisfaction, burn out and mental health among workers of Esfahan Steel Company. The research approach is typically descriptive and causal - solidarity and for data analysis and syntheses, descriptive statistics solution have been used including mean value, standard deviation and frequency percentages and the inferential statistics solutions included multiple correlation coefficient , Pearson correlation , multivariate analysis of variance and path analysis . In this study, the correlation between informal learning and job satisfaction and the correlation between burn out and job satisfaction level have been found significant at P 0.01. The correlation coefficient between burn out and mental health as well as mental health and job satisfaction have not been found as significant . Findings imply that burnout and informal learning can predict job satisfaction . Norelation ship has been observed between informal learning and burn out and between informal learning and mental health, while the relationships between informal learning and job satisfaction and between burn out and job satisfaction have been confirmed. The conceptual model of research has been evaluated using path analysis and Confirmatory Factor Analysis . Findings denote the direct effect of informal learning on job satisfaction and indirect effect of burn out on job satisfaction . Referring to the Structural Equation Modeling, among three main paths, the effect of informal learning and burn out on job satisfaction has been observed and it has been found that mental health has no effect on job satisfaction. Major limitation of this research is related to generalization of findings to other steel manufacturing companies, industries and public organizations.

Clinimetric properties of the Brazilian-Portuguese version of the Quick Exposure Check (QEC

Directory of Open Access Journals (Sweden)

Maria L. C. Comper

Full Text Available BACKGROUND: Most of the available instruments aimed to assess risk exposure associated with work-related musculoskeletal disorders were originally developed in English, which makes their use difficult in countries such as Brazil. OBJECTIVE: To test the clinimetric properties of the Quick Exposure Check (QEC instrument previously adapted into Brazilian-Portuguese. METHOD: The original version of the QEC was translated and cross-culturally adapted into Brazilian-Portuguese and tested with 107 workers in two sectors of a textile factory. The internal consistency and construct validity were tested using only baseline values from the participants while reproducibility (reliability and agreement was evaluated in a test-retest design with a seven-day interval. RESULTS: The adapted version presented appropriate levels of internal consistency (Cronbach's α=0.76; moderate intra-observer reliability (ICCs ranging from 0.41 to 0.60; moderate to substantial inter-observer reliability (ICCs ranging between 0.62 and 0.86. The standard error of the measurement (SEM ranged from 8.3 to 11.2 points. Moderate levels of construct validity (Pearson's r=0.38 were observed. CONCLUSIONS: The Brazilian version of the QEC has appropriate clinimetric properties for measuring different levels of exposure to ergonomics risk factors and can now be used by Brazilian researchers and Occupational Health professionals.

HIV frequency among female sex workers in Imbituba, Santa Catarina, Brazil

Directory of Open Access Journals (Sweden)

Fabiana Schuelter Trevisol

Full Text Available We examined HIV frequency and probable risk factors among female sex workers in the port city of Imbituba, Southern Brazil. From December 2003 through February 2004, 90 female sex workers were interviewed in order to investigate demographic, socioeconomic and behavioral variables related to HIV infection. A blood sample of each woman was also collected to test for HIV antibodies. Six (6.7% of the sex workers were HIV-positive; the significantly-correlated risk factors were the daily number of clients (p = 0.008, the use of inhaled illicit drugs by the sex workers (P = 0.053 and by their clients (p = 0.005, and the lack of condom use in sexual relations (p = 0.015. The HIV infection rate in these sex workers was higher than that in the general population and similar to that found in other studies made with Brazilian populations presenting the same characteristics. This highlights the need for preventative measures, especially in this port area, in order to reduce transmission and to deter the introduction and dissemination of HIV.

[The contribution of indigenous community health workers to special healthcare for Brazilian indigenous peoples].

Science.gov (United States)

Diehl, Eliana Elisabeth; Langdon, Esther Jean; Dias-Scopel, Raquel Paiva

2012-05-01

Indigenous community health workers are part of a strategy developed by Brazil in the last two decades to promote a special healthcare model for indigenous peoples. Their role is designed to deal with various aspects of the special health policy, including the link between the heath team and the community and mediation between scientific and indigenous medical knowledge. Despite a significant increase in the number of indigenous community health workers in recent years, an evaluation of their responsibilities and contributions to the success of special care had not been conducted previously. This article, based on a literature review and original research by the authors, analyzes the role of the indigenous community health workers vis-à-vis their training and participation in health teams in different contexts in Brazil. Considering the importance assigned to the role of indigenous community health workers, this analysis reveals various ambiguities and contradictions that hinder both their performance and their potential contribution to the special health services.

Development of austenitic stainless steel tubes for nuclear reactor cladding

International Nuclear Information System (INIS)

Padilha, A.F.; Ferreira, P.I.; Andrade, P.I.; Andrade, A.H.P. de; Meyerhof, S.; Mauricio, J.

1984-01-01

In the development of thin wall tubes for nuclear reactor fuel cladding applications, a great number of activities, related to the fabrication process as the qualification are involved. A test program was envisaged to verify the quality of seam welded stainless steel tubes (AISI 304), obtained as a result of an effort by the IPEN-CNEN/SP and the brazilian industry. The relevant aspects involved in the preparation of the tubes and some preliminary test results are presented. (Author) [pt

[Health risk assessment of exposure to metals in the workers of the steel foundry and in the general population of Taranto (Italy)].

Science.gov (United States)

Soleo, Leonardo; Lovreglio, Piero; Panuzzo, Laura; D'Errico, Maria Nicolà; Basso, Antonella; Gilberti, Maria Enrica; Drago, Ignazio; Tomasi, Cesare; Apostoli, Pietro

2012-01-01

To study the urinary excretion of As, Cr, Mn, Co, Ni, Cu, Zn, Cd, Sn, Ba, Hg, Pb, Sb in workers at the Taranto integrated-cycle steel foundry and in subjects from the general population of Taranto, to assess the health risk posed by occupational exposure and environmental exposure, respectively, to these metals. The study included 49 steel foundry workers (exposed), working in the minerals and agglomerates pools, steel processing plants 1 and 2 and maritime plants, and 50 subjects belonging to the general population of Taranto resident at various distances from the factory (controls), randomly selected from the exposed subjects and controls enrolled in previous research conducted in 2005. A questionnaire was administered to all participants, enquiring into general characteristics, lifestyle, diet, and any medical conditions. Informed written consent to take part in the study was obtained from all subjects before enrolment. The results of environmental monitoring performed in 2005 in the workers' sectors, consisting of determining As, Cr, Mn, Ni, Cu, Zn, Cd and Pb in the respirable dust, revealed by both samplers applied in fixed positions and personal samplers, were considered. Urine samples were obtained from all participants on a Friday, to determine As and Cr by AAS and all the other metal elements by a multielement technique with ICP-MS. Urinary creatinine was also determined to make any necessary adjustments. All urine analyses were performed in 2005 within one month of urine collection. In the respirable dust, As and Cd were always within the LOD, whereas Cr, Mn, Ni, Cu and Pb were 1-2 orders of magnitude below the respective TLV-TWA of the ACGIH. Mn was the only metal element that presented significantly higher urinary concentrations in exposed subjects as compared to controls, although the values in both groups were in any case within the Italian reference range. Co, Cu, Zn, Sn and Sb showed significantly higher urinary concentrations in controls than in

[Health workers' experiences in dealing with the neoliberal logic: a study of primary care in Colombia and Brazil].

Science.gov (United States)

Garrido-Pinzón, Johanna; Bernardo, Marcia Hespanhol

2017-09-28

: The aim of this study was to analyze the experiences of primary healthcare workers in the public health systems in Colombia and Brazil in relation to the neoliberal logic. These two cases are relevant to public health research, as examples of health systems that emerged from opposing guidelines: the Colombian system was created at the government level with a marked private-sector influence, while the Brazilian system was an important conquest by social movements. Based on the Social Psychology of Work, this was a qualitative and empirical study. In-depth reflexive interviews were conducted with two groups of primary healthcare and administrative workers: one in Bucaramanga, Colombia, and the other in Campinas (São Paulo State), Brazil. Content analysis was used in the analytical process. According to the study, in both countries the main experiences of healthcare workers involve the changes in working conditions, relations, and organization. In the Colombian context, we identified the central problems in the transition induced by the reform that established the country's current health system. These problems are expressed in the deterioration of relations with health system users, as well as in the configuration of healthcare teams, marked by conflicting employment arrangements in the healthcare staff. The latter condition also appears in the Brazilian context, as a result of outsourcing, which appears to have become an effective mechanism for undermining the Brazilian Unified National Health System (SUS), facilitating its dismantlement and pointing it in the same direction as the Colombian system.

Sickness absence among municipal workers in a Brazilian municipality: a secondary data analysis.

Science.gov (United States)

Leao, Ana Lucia M; Barbosa-Branco, Anadergh; Turchi, Marília D; Steenstra, Ivan A; Cole, Donald C

2017-12-28

Sickness absence, work disability associated with illness or injury, is a major public health problem worldwide. Some studies have investigated determinants of sickness absence among workers with shorter job tenure, but have only focused on certain diagnostic groups. Although it is well established that job tenure has an inverse relationship with work injury rate, less is known about its association with sickness absence for other disorders. Therefore, this study aimed to investigate the risk factors for incidence and duration of sickness absence according to diagnosis over a 7-year period. A dynamic cohort consisting of all permanent civil servants hired from 2005 to 2011 by the Goiania municipality-Brazil. Data of certified sickness absences longer than 3 days were analyzed. The incidence density was calculated per 1000 person-years in each ICD-10 category. The association between sickness absence and socio-demographic and occupational characteristics was examined using negative binomial regression models. 18,450 workers, mean age of 32 years, accumulated 14,909 episodes of sickness absence. Overall, the incidence density was 234.6 episodes per 1000 person years. Diagnostic groups with the highest incidence density of sickness absences were injuries (49.1), musculoskeletal disorders (31.3) and mental disorders (29.2). Factors predicting any sickness absence were female gender, older age, low education, being a health professional, multiple jobs and full-time employment. Mental health disorders were more common among education professionals, musculoskeletal disorders among blue collar workers and injuries among inspection workers. Prolonged time on sick leave was associated with male gender, older age groups, low education and income, blue-collar workers, more than one job contract and full time employment. These findings demonstrate a substantial sickness absentee burden and they provide relevant information for targeting prevention and health promotion

Incidence of severe work-related injuries among young adult workers in Brazil: analysis of compensation data.

Science.gov (United States)

Sousa Santana, Vilma; Villaveces, Andrés; Bangdwala, Shrikant L; Runyan, Carol W; Albuquerque Oliveira, Paulo Rogerio

2012-08-01

To obtain national estimates of the annual cumulative incidence and incidence density of severe non-fatal injuries using compensation benefits data from the Brazilian National Social Security Institute (INSS), and to describe their sociodemographic distribution among workers aged under 25 years. Data are records of health-related compensation benefits from the Ministry of Social Insurance's information system of compensation benefits of the INSS recorded in 2006. Injuries were cases classified under chapter XIX, ICD-10. The assessment of their relation with work was made by INSS's occupational physician experts. The study population comprised young workers aged 16-24 years. 59,381 workers received compensation benefits for injuries in the study year. Among them 14,491 (24.4%) were work related, 12,501 (86.3%) were male and 1990 were female workers (13.7%). The annual cumulative incidence rate of work-related injuries (ACI-WI) was 2.9×1000 workers, higher among men (4.2×1000) than women (1.0×1000). The incidence density rate (IDR-WI) was 0.7/1000 full-time equivalent (FTE), higher for men (0.97/1000 FTE) than women (0.24/1000 FTE). Both morbidity measures were higher in the younger group (16-19 years), and inversely related to wage, especially for women in the younger group. Logging, extraction, food/beverage and construction industries had higher ACI-WI and IDR-WI for adolescents and young adult workers of both sex groups. These findings suggest that the Brazilian labour laws limiting young adult workers in hazardous settings need to be expanded, adding occupations in other extractive industries and certain types of work in the food/beverage manufacturing industries. Social inequalities associated with sex need to be examined further with more detailed data.

Determination of selected metals in the body tissues of occupationally exposed stainless steel workers by neutron activation analysis

International Nuclear Information System (INIS)

Kucera, J.; Soukal, L.; Randa, Z.; Borska, L.; Bencko, V.; Tejral, J.

2002-01-01

Occupational exposure was examined in a group of 20 workers dealing mainly with welding, polishing, and assembling of stainless steel constructions. Biological monitoring of exposure involved the determination of Cr, Mn, Mo, Ni and V in hair and nails by instrumental neutron activation analysis (INAA), urinary Cr and Mn, serum Cr and blood Mn by neutron activation analysis with radiochemical separation (RNAA). The RNAA procedures employed are briefly described. Significantly elevated levels were found for Cr in hair, nails, serum and urine, Mo in hair, and Mn in blood in the exposed subjects compared to controls. The ratios of the mean elemental concentrations for the exposed/control subjects were as follows: 12.5 for hair Cr, 4.4 for nail Cr, 9.6 for serum Cr, 9.0 for urinary Cr, 1.4 for hair Mo and 1.3 for blood Mn. For quality control purposes a number of biological intercomparison and reference materials were analysed. A good agreement obtained with consensus and/or certified values proved the accuracy of our results. The results for the control group compared also well with reference values, thus indicating that no contamination occurred on sampling and sample treatment prior to irradiation. To be able to evaluate the health effects of exposure, haematological, genotoxicity and immunological parameters were also assayed. A number of immunological parameters were altered in the exposed group compared to controls. However, no significant correlations were found between exposure of the individual workers measured with the aid of personal air particulate samplers and the biological indicators of exposure. A comparison of direct and biological monitoring indicates the complexity of the assessment of health effects of occupational exposure. (author)

Niobium in steels and alloys

International Nuclear Information System (INIS)

Lyakishev, N.P.; Tulin, N.A.; Pliner, Y.L.

1984-01-01

Data are presented on the reserves and processing of niobium raw materials followed by brief review of the current status and long-range trends in the commercial usage of niobium and its compounds. A survey is made of the physical properties of niobium and its chemical reactions with elements of direct concern in the manufacture of ferroalloys, quality steels and other products. Niobium minerals and ores, along with common ore processing practices are described briefly. Attention is paid to Brazilian niobium ores, and to the Araxa deposit specifically. Some emphasis has been given to methods of processing lean niobium ores not easily amenable to simple concentration. A systematic review is presented of the techniques used in the production of niobium ferroalloys. (E.G.) [pt

Informalidade no mercado de trabalho brasileiro: uma resenha da literatura Brazilian labor market informality: a review of the literature

Directory of Open Access Journals (Sweden)

Gabriel Ulyssea

2006-12-01

Full Text Available The economic literature relative to Brazilian labor market informality is very disperse and presents a significant lack of organization. In that sense, the purpose of this paper is to organize and discuss on a systematic way the main pieces of literature concerning informality in the Brazilian labor market using, whenever it is possible, the international literature as a comparison point for the existing results relative to Brazil's experience. More specifically, questions related to wage differentials between formal and informal workers, labor market segmentation and the effect of institutions on the informal sector are emphasized.

[Brazilian colonization in the Paraguayan agricultural frontier].

Science.gov (United States)

Neupert, R F

1991-04-01

This work briefly describes Brazilian colonization of the Paraguayan agricultural frontier, analyzes factors responsible for expelling population from Brazil and for attracting Brazilians to Paraguay, and assesses the economic and social consequences of immigration to the area. Paraguay's vast and sparsely populated agricultural frontier in areas outside the Central subregion underwent a process of intense colonization from the early 1960s to the mid-1980s. The Paraguayan government initiated an ambitious colonization program in 1963 to increase production, relieve population pressure and subdivision of small parcels in the Central subregion, encourage agricultural modernization, and produce a more diversified agriculture. Paraguayan agriculture in the early 1960s suffered from excessive concentration of land in a few hands and resulting exclusion of around 3/4 of workers from ownership and from any possibility of obtaining credit to fund technological improvements. Results of studies 2 decades after implementation of the colonization plan suggest that it has failed in significant areas. Although a considerable population redistribution alleviated pressure in the Central subregion, it apparently resulted more from spontaneous movement of peasants outside the colonization areas than from the official program. Concentration of lands is now occurring in the colonization area. Assistance for agricultural modernization and diversification of production in the peasant sector has been minimal. On the other hand, production of soy, wheat, and cotton for export increased substantially, because of an entrepreneurial agriculture capitalized by foreign as well as national interests The unmet goals of the colonization program would have required structural reforms rather than simple spatial redistribution of the population. Many of the colonists in the 1970s were Brazilian families displaced by mechanized agriculture in the southern states of Parana, Santa Catarina, and Rio

Occupational Health and Safety in Aquaculture: Insights on Brazilian Public Policies.

Science.gov (United States)

de Oliveira, Pedro Keller; Cavalli, Richard Souto; Kunert Filho, Hiran Castagnino; Carvalho, Daiane; Benedetti, Nadine; Rotta, Marco Aurélio; Peixoto Ramos, Augusto Sávio; de Brito, Kelly Cristina Tagliari; de Brito, Benito Guimarães; da Rocha, Andréa Ferretto; Stech, Marcia Regina; Cavalli, Lissandra Souto

2017-01-01

Aquaculture has many occupational hazards, including those that are physical, chemical, biological, ergonomic, and mechanical. The risks in aquaculture are inherent, as this activity requires particular practices. The objective of the present study was to show the risks associated with the aquaculture sector and present a critical overview on the Brazilian public policies concerning aquaculture occupational health. Methods include online research involved web searches and electronic databases including Pubmed, Google Scholar, Scielo and government databases. We conducted a careful revision of Brazilian labor laws related to occupational health and safety, rural workers, and aquaculture. The results and conclusion support the idea that aquaculture requires specific and well-established industry programs and policies, especially in developing countries. Aquaculture still lacks scientific research, strategies, laws, and public policies to boost the sector with regard to occupational health and safety. The establishment of a safe workplace in aquaculture in developing countries remains a challenge for all involved in employer-employee relationships.

Publication in a Brazilian journal by Brazilian scientists whose papers have international impact.

Science.gov (United States)

Meneghini, R

2010-09-01

Nine Brazilian scientists with an outstanding profile of international publications were invited to publish an original article in the same issue of a Brazilian Journal (Anais da Academia Brasileira de Ciências). The objective was to measure the impact of the papers on the number of citations to the articles, the assumption being that these authors would carry their international prestige to the Brazilian periodical. In a 2-year period there was a larger number of citations of these articles compared to others published in the same journal. Nevertheless, the number of citations in Brazilian journals did not equal the number of citations obtained by the other papers by the same authors in their international publications within the same 2-year period. The reasons for this difference in the number of citations could be either that less significant invited articles were submitted or that it was due to the intrinsic lack of visibility of the Brazilian journals, but this could not be fully determined with the present data. Also relevant was a comparison between the citations of Brazilian journals and the publication in Brazilian journals by these selected authors. A clear imbalance due to a remarkable under-citation of Brazilian authors by authors publishing in Brazilian journals raises the possibility that psychological factors may affect the decision of citing Brazilian journals.

Association between work ability and fatigue in Brazilian nursing workers.

Science.gov (United States)

da Silva, Fabio José; Felli, Vanda Elisa Andres; Martinez, Maria Carmen; Mininel, Vivian Aline; Ratier, Ana Paula Pelegrini

2015-01-01

Impaired work ability is associated with work-related illnesses, early retirement and rising pension costs. To investigate the association between work ability and fatigue in nursing workers. Cross-sectional study conducted with 100 nursing workers from two inpatient units at a public teaching hospital in Sao Paulo, Brazil. The data were collected by means of a socio-demographic profile questionnaire, Work Ability Index (WAI) and Chalder Fatigue Scale. The data were analyzed by means of descriptive and analytical statistical methods, tests of association and multiple linear regression. The study population was mainly composed of women (88% ), exhibited a high educational level (76% ), average age 39.4 years old (SD = 9.5) and 15 years of professional experience, on average. The average score on WAI was good (39.4 points, SD = 6.0) but surprisingly, 35% of the participants exhibited moderate to poor work ability. Fatigue was found in 52% of the participants. The score on WAI decreased in association with fatigue (p work in the same workplace (p = 0.001), as well as among nursing technicians compared to nurses (p = 0.040). Fatigue, longer length of work in the same workplace and work category nursing technician were associated with decreased work ability, which emphasizes the need for investment in health and quality of work life.

Effect of annealing temperature on microstructure of ferritic stainless steels with high Mo content; Efeito da temperatura de recozimento na microestrutura em acos inoxidaveis ferriticos com alto teor de Mo

Energy Technology Data Exchange (ETDEWEB)

Abreu, H.F.G.; Miranda, H.C. [Universidade Federal do Ceara (UFC), Fortaleza (Brazil). Dept. de Engenharia Metalurgica e de Materiais; Herculano, L.F.G. [Universidade Federal do Ceara (UFC), Fortaleza (Brazil). Lab. de Caracterizacao de Materiais; Tavares, S.S.M. [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil). Dept. de Engenharia Mecanica

2006-07-01

The petroleum refined in Brazilian refining plants is characterized by its high content of sulphur. This fact has increased problems related to naphtenic corrosion. It is known by the experience in refining that steels with high contents of Mo present good naphtenic corrosion resistance. This papers studied aspects referring to mechanical properties and microstructure of high Mo ferritic stainless steels developed in laboratory as a function of annealing temperature. Results showed that temperatures between 1000 and 1050 deg C were more suitable to the steels studied. (author)

Feasibility analysis of recycling radioactive scrap steel

International Nuclear Information System (INIS)

Nichols, F.; Balhiser, B.; Cignetti, N.

1995-09-01

The purpose of this study is to: (1) establish a conceptual design that integrates commercial steel mill technology with radioactive scrap metal (RSM) processing to produce carbon and stainless steel sheet and plate at a grade suitable for fabricating into radioactive waste containers; (2) determine the economic feasibility of building a micro-mill in the Western US to process 30,000 tons of RSM per year from both DOE and the nuclear utilities; and (3) provide recommendations for implementation. For purposes of defining the project, it is divided into phases: economic feasibility and conceptual design; preliminary design; detail design; construction; and operation. This study comprises the bulk of Phase 1. It is divided into four sections. Section 1 provides the reader with a complete overview extracting pertinent data, recommendations and conclusions from the remainder of the report. Section 2 defines the variables that impact the design requirements. These data form the baseline to create a preliminary conceptual design that is technically sound, economically viable, and capitalizes on economies of scale. Priorities governing the design activities are: (1) minimizing worker exposure to radionuclide hazards, (2) maximizing worker safety, (3) minimizing environmental contamination, (4) minimizing secondary wastes, and (5) establishing engineering controls to insure that the plant will be granted a license in the state selected for operation. Section 3 provides details of the preliminary conceptual design that was selected. The cost of project construction is estimated and the personnel needed to support the steel-making operation and radiological and environmental control are identified. Section 4 identifies the operational costs and supports the economic feasibility analysis. A detailed discussion of the resulting conclusions and recommendations is included in this section

Reframing the Public in Public Education: The Landless Workers Movement (MST) and Adult Education in Brazil

Science.gov (United States)

Thapliyal, Nisha

2013-01-01

Education for rural Brazilians has historically been dominated by two imperatives: human capital and political patronage. For the last four decades, the Landless Workers Movement (MST) have maintained a struggle to democratise public education and democracy itself. In this article, I make a situated analysis of the educational politics of the MST…

Validity and reliability of the Brazilian version of the Work Ability Index questionnaire.

Science.gov (United States)

Martinez, Maria Carmen; Latorre, Maria do Rosário Dias de Oliveira; Fischer, Frida Marina

2009-06-01

To evaluate the validity and reliability of the Portuguese language version of a work ability index. Cross sectional survey of a sample of 475 workers from an electrical company in the state of Sao Paulo, Southeastern Brazil (spread across ten municipalities in the Campinas area), carried out in 2005. The following aspects of the Brazilian version of the Work Ability Index were evaluated: construct validity, using factorial exploratory analysis, and discriminant capacity, by comparing mean Work Ability Index scores in two groups with different absenteeism levels; criterion validity, by determining the correlation between self-reported health and Work Ability Index score; and reliability, using Cronbach's alpha to determine the internal consistency of the questionnaire. Factorial analysis indicated three factors in the work ability construct: issues pertaining to 'mental resources' (20.6% of the variance), self-perceived work ability (18.9% of the variance), and presence of diseases and health-related limitations (18.4% of the variance). The index was capable of discriminating workers according to levels of absenteeism, identifying a significantly lower (pindex and all dimensions of health status analyzed (pindex was high, with a Cronbach's alpha of 0.72. The Brazilian version of the Work Ability Index showed satisfactory psychometric properties with respect to construct validity, thus constituting an appropriate option for evaluating work ability in both individual and population-based settings.

Neutron spectrum survey around the cyclotron of IEN/Brazilian CNEN: calibration of neutron personnel dosemeter

International Nuclear Information System (INIS)

Fajardo, P.W.

1991-01-01

The albedo neutron dosimeter is calibrated directly at the work place due to its high energy dependence. This thesis deals with the study, analysis and application of neutron measurement techniques in order to obtain information about the neutron spectrum and neutron dose equivalent at several representative working places of the cyclotron laboratory of the Nuclear Engineering Institute (IEN). These data are employed mainly in the calibration of the brazilian albedo neutron dosimeter. Bonner spheres and foil activation were used in neutron spectra measurements and the neutron dose equivalents were measured with the single sphere albedo technique. BF 3 and 3 He proportional detectors and 6 LiI scintillation detector were also used in these measurements. The single sphere technique turned out to be more appropriate for neutron dosimetry for calibrating the albedo dosimeter in the varying fields of the cyclotron. Calibration the albedo dosimeter in the varying fields of the cyclotron. Calibration factors were found for routine applications, when the workers are protected by shielding and for radiological accident applications, in the case that a worker is exposed inside the cyclotron room. In all situations the performance of the brazilian albedo dosimeter is compared with that of the german albedo dosimeters. (author)

Multicriteria Analysis of Assembling Buildings from Steel Frame Structures

Science.gov (United States)

Miniotaite, Ruta

2017-10-01

Steel frame structures are often used in the construction of public and industrial buildings. They are used for: all types of slope roofs; walls of newly-built public and industrial buildings; load bearing structures; roofs of renovated buildings. The process of assembling buildings from steel frame structures should be analysed as an integrated process influenced by such factors as construction materials and machinery used, the qualification level of construction workers, complexity of work, available finance. It is necessary to find a rational technological design solution for assembling buildings from steel frame structures by conducting a multiple criteria analysis. The analysis provides a possibility to evaluate the engineering considerations and find unequivocal solutions. The rational alternative of a complex process of assembling buildings from steel frame structures was found through multiple criteria analysis and multiple criteria evaluation. In multiple criteria evaluation of technological solutions for assembling buildings from steel frame structures by pairwise comparison method the criteria by significance are distributed as follows: durability is the most important criterion in the evaluation of alternatives; the price (EUR/unit of measurement) of a part of assembly process; construction workers’ qualification level (category); mechanization level of a part of assembling process (%), and complexity of assembling work (in points) are less important criteria.

Radiochemical and radioecological studies on Brazilian areas of high natural background. Progress report, October 30, 1974--October 30, 1975

International Nuclear Information System (INIS)

Costa-Ribeiro, C.; Penna-Franca, E.; Rocha-Nogueira, A.; Christian-Pfeiffer, W.

1975-11-01

The absorption of 212 Pb and/or 212 Bi by ertythrocytes was investigated in an attempt to explain the in vivo genesis of somatic chromosomal aberrations of the type detected in peripheral blood lymphocytes of workers professionally exposed to 220 Rn and its decay products, as well as in dwellers of Brazilian areas of high natural radioactivity

The microstructure effect on the fracture toughness of ferritic Ni-alloyed steels

International Nuclear Information System (INIS)

Scheid, Adriano; Félix, Lorenzo Marzari; Martinazzi, Douglas; Renck, Tiago; Fortis Kwietniewski, Carlos Eduardo

2016-01-01

Production of oil and gas in the Brazilian pre-salt faces several technical challenges and one of them that is a major concern is the presence of CO_2 in high concentration. The aim of this work is to evaluate the fracture toughness of two nickel-containing steels as an alternative material to manufacture low-temperature toughness improved CO_2 transporting pipelines for Enhanced oil recovery (EOR). Optical and scanning electron microscopies were employed to characterize the steels microstructures. Electron back-scattered diffraction was used to estimate the effective grain size and the density of high-angle grain boundaries. Fracture toughness was determined by the use of the crack tip opening displacement methodology. The results indicated that for the as-rolled condition the large islands of the microconstituent M/A in the 5"1"/"2 Ni steel had a detrimental effect on fracture toughness at −100 °C, while finer M/A particles and lower effective grain size with higher density of high-angle grain boundaries in the 9 Ni steel turned its fracture toughness practically temperature independent. Additionally, heat treatment (quenching and tempering) has the potential to dissolve the M/A hard particles and consequently improve fracture toughness at low temperature.

The microstructure effect on the fracture toughness of ferritic Ni-alloyed steels

Energy Technology Data Exchange (ETDEWEB)

Scheid, Adriano, E-mail: scheid@ufpr.br [Programa de Pos-Graduação em Engenharia Mecânica, PGMec, Universidade Federal do Paraná, Av. Cel. Francisco H. dos Santos, 210, Curitiba (Brazil); Félix, Lorenzo Marzari; Martinazzi, Douglas; Renck, Tiago; Fortis Kwietniewski, Carlos Eduardo [Programa de Pos-Graduação em Engenharia de Minas, Metalurgia e Materiais, PPGE3M, Universidade Federal do Rio Grande do Sul, Av. Bento Gonçalves, 9500, Porto Alegre (Brazil)

2016-04-20

Production of oil and gas in the Brazilian pre-salt faces several technical challenges and one of them that is a major concern is the presence of CO{sub 2} in high concentration. The aim of this work is to evaluate the fracture toughness of two nickel-containing steels as an alternative material to manufacture low-temperature toughness improved CO{sub 2} transporting pipelines for Enhanced oil recovery (EOR). Optical and scanning electron microscopies were employed to characterize the steels microstructures. Electron back-scattered diffraction was used to estimate the effective grain size and the density of high-angle grain boundaries. Fracture toughness was determined by the use of the crack tip opening displacement methodology. The results indicated that for the as-rolled condition the large islands of the microconstituent M/A in the 5{sup 1/2} Ni steel had a detrimental effect on fracture toughness at −100 °C, while finer M/A particles and lower effective grain size with higher density of high-angle grain boundaries in the 9 Ni steel turned its fracture toughness practically temperature independent. Additionally, heat treatment (quenching and tempering) has the potential to dissolve the M/A hard particles and consequently improve fracture toughness at low temperature.

Enterobacteriaceae ISOLATES FROM THE ORAL CAVITY OF WORKERS IN A BRAZILIAN ONCOLOGY HOSPITAL

Directory of Open Access Journals (Sweden)

Lara Stefânia Netto de Oliveira LEÃO-VASCONCELOS

2015-04-01

Full Text Available The evaluation of workers as potential reservoirs and disseminators of pathogenic bacteria has been described as a strategy for the prevention and control of healthcare-associated infections (HAIs. The aim of this study was to evaluate the presence of Enterobacteriaceae in the oral cavity of workers at an oncology hospital in the Midwest region of Brazil, as well as to characterize the phenotypic profile of the isolates. Saliva samples of 294 workers from the hospital’s healthcare and support teams were collected. Microbiological procedures were performed according to standard techniques. Among the participants, 55 (18.7% were colonized by Enterobacteriaceae in the oral cavity. A total of 64 bacteria were isolated, including potentially pathogenic species. The most prevalent species was Enterobacter gergoviae (17.2%. The highest rates of resistance were observed for β-lactams, and 48.4% of the isolates were considered multiresistant. Regarding the enterobacteria isolated, the production of ESBL and KPC was negative. Nevertheless, among the 43 isolates of the CESP group, 51.2% were considered AmpC β-lactamase producers by induction, and 48.8% were hyper-producing mutants. The significant prevalence of carriers of Enterobacteriaceae and the phenotypic profile of the isolates represents a concern, especially due to the multiresistance and production of AmpC β-lactamases.

Comparison of postmenopausal endogenous sex hormones among Japanese, Japanese Brazilians, and non-Japanese Brazilians

Directory of Open Access Journals (Sweden)

Maciel Maria

2011-02-01

Full Text Available Abstract Background Differences in sex hormone levels among populations might contribute to the variation in breast cancer incidence across countries. Previous studies have shown higher breast cancer incidence and mortality among Japanese Brazilians than among Japanese. To clarify the difference in hormone levels among populations, we compared postmenopausal endogenous sex hormone levels among Japanese living in Japan, Japanese Brazilians living in the state of São Paulo, and non-Japanese Brazilians living in the state of São Paulo. Methods A cross-sectional study was conducted using a control group of case-control studies in Nagano, Japan, and São Paulo, Brazil. Participants were postmenopausal women older than 55 years of age who provided blood samples. We measured estradiol, estrone, androstenedione, dehydroepiandrosterone sulfate (DHEAS, testosterone and free testosterone by radioimmunoassay; bioavailable estradiol by the ammonium sulfate precipitation method; and sex hormone-binding globulin (SHBG by immunoradiometric assay. A total of 363 women were included for the present analyses, comprising 185 Japanese, 44 Japanese Brazilians and 134 non-Japanese Brazilians. Results Japanese Brazilians had significantly higher levels of estradiol, bioavailable estradiol, estrone, testosterone and free testosterone levels, and lower SHBG levels, than Japanese. Japanese Brazilians also had significantly higher levels of bioavailable estradiol, estrone and DHEAS and lower levels of SHBG and androstenedione than non-Japanese Brazilians. Levels of estradiol, testosterone and free testosterone, however, did not differ between Japanese Brazilians and non-Japanese Brazilians. These differences were observed even after adjustment for known breast cancer risk factors. We also found an increase in estrogen and androgen levels with increasing body mass index, but no association for most of the other known risk factors. Conclusions We found higher levels of

The role of psychosocial and physical work-related factors on the health-related quality of life of Iranian industrial workers.

Science.gov (United States)

Mokarami, Hamidreza; Stallones, Lorann; Nazifi, Morteza; Taghavi, Sayed Mohammad

2016-10-17

The role of psychosocial and physical work factors in predicting health related quality of life (HRQOL) has not been investigated among Iranian industrial workers. The present study is designed to assess these relationships among Iranian workers from steel and cosmetic factories. A cross-sectional study was conducted among 280 workers from two factories. Psychosocial and physical work factors and HRQOL were measured by the Persian translations of the following questionnaires: Job Content Questionnaire (JCQ) and the World Health Organization Quality of Life-Brief (WHOQOL-Brief). An instrument was developed to assess socio-demographic, health, and other work-related factors. The data were analyzed using independent t-tests, Pearson product moment correlation and hierarchical multiple regression. Results revealed that the respondents generally had poor HRQOLs especially in the environmental domain. The steel factory workers who were exposed to higher levels of occupational risk factors suffered from poorer HRQOL compared to the cosmetic factory workers. The results of hierarchical regression for all participants revealed that social support, sleep quality, work schedule, smoking and exercise were significant predictors of all domains of HRQOL. To improve the worker's HRQOL, intervention programs should focus on promoting social support, sleep quality, exercise and smoking habits. Moreover, reducing hazardous work environments should be considered an important intervention to promote HRQOL.

Assessment of dust exposure in a steel plant in the eastern coast of peninsular Malaysia.

Science.gov (United States)

Nurul, Ainun Hamzah; Shamsul, Bahri Mohd Tamrin; Noor Hassim, Ismail

2016-11-22

Steel manufacturing produces dust, fumes, and pollutant gases that may give adverse health effects to the respiratory function of workers. Improper occupational hygiene practice in the workplace will affect both workers wellbeing and productivity. To assess the level of particulate matter [(PM2.5, PM10, and Total Particulate Matter (TPM)], and trace metal dust concentrations in different sections of a steel plant and compare with the occupational exposure values. The work environmental parameters of the particulate matters were evaluated using Indoor Air Quality, while metal dust concentrations were measured using portable personal air sampler. A total of 184 personal samples were randomly collected from workers in three major sections; steel making plant, direct reduced plant, and support group. Trace metal dust concentrations were subjected to wet mineral acid mixture digestion and analysed by atomic absorption spectrophotometer (AAS). The overall average PM2.5 concentration observed was varied according to the section: steel making plant was 0.18 mg/m3, direct reduced iron plant was 0.05 mg/m3, and support plant was 0.05 mg/m3. Average PM 10 concentration in steel making shop (SMS) plant, direct reduced (DR) plant, and support plant were 0.70 mg/m3, 0.84 mg/m3, and 0.58 mg/m3, respectively. The average TWA8 of trace metal dusts (cobalt and chromium) in all the sections exceeded 1 to 3 times the ACGIH prescribed values, OSHA PELs, NIOSH RELs as well as USECHH OSHA, whereas TWA8 concentration of nickel for each section did not exceed the occupational exposure values. The average PM2.5, PM10 and TPM did not exceed the prescribed values, while average trace metal dust concentration TWA8 for cobalt and chromium in all plants exceeded occupational exposure prescribed values. However, the nickel found did not exceed the prescribed values in all the plants except for NIOSH RELs.

75 FR 5146 - Tempel Steel Company Including On-Site Leased Workers From Aerotek Staffing Chicago, IL; Tempel...

Science.gov (United States)

2010-02-01

... the production of lamination sheet steel for electric motors and transformers. New findings show that... affected by a shift in production of lamination sheet steel for electric motors and transformers to Mexico...

What do petrochemical workers, healthcare workers, and truck drivers have in common? Evaluation of sleep and alertness in Brazilian shiftworkers O que têm em comum os trabalhadores da indústria petroquímica, profissionais de saúde e caminhoneiros? Sono e vigília entre trabalhadores em turnos no Brasil

Directory of Open Access Journals (Sweden)

Frida Marina Fischer

2004-12-01

Full Text Available The article reports briefly on some effects of shiftwork and the work environment on health and wellbeing of shiftworkers. Studies of Brazilian shiftworkers (healthcare workers, petrochemical workers, and truck drivers are described. A similar methodology was used to evaluate sleep and alertness in all these studies. The evaluation of sleep duration and quality and alertness showed similar results in the three studies. Although the workers were in different work settings, performing different jobs, the results are similar: daytime sleep is reduced and perceived as having worse quality than nighttime sleep; alertness decreases as the night work progresses. The study highlights the importance of shiftwork schedules' features and work organization for workers' health, wellbeing, and safety.Este artigo apresenta de forma resumida os efeitos do trabalho em turnos na saúde e bem-estar dos trabalhadores. São apresentados estudos conduzidos em hospitais, indústria petroquímica e companhias de caminhões de carga. Foi utilizada metodologia semelhante nos estudos descritos para avaliação da duração e qualidade do sono, assim como do alerta durante o trabalho. Apesar dos trabalhadores realizarem tarefas bastante distintas, os resultados das avaliações de sono e alerta foram semelhantes: os trabalhadores após turnos noturnos apresentaram sono mais curto do que após outros turnos, comparados consigo mesmos e/ou com seus colegas de turnos diurnos. É enfatizada a importância da escala em turnos, assim como da organização do trabalho, para auxiliar os trabalhadores a manterem sua saúde, bem-estar e segurança no trabalho.

Study of protein and metabolic profile of sugarcane workers

Energy Technology Data Exchange (ETDEWEB)

Polachini, G.M.; Tajara, E.H. [Faculdade de Medicina de Sao Jose do Rio Preto (FAMERP), SP (Brazil); Santos, U.P. [Universidade de Sao Paulo (USP), SP (Brazil); Zeri, A.C.M.; Paes Leme, A.F. [Laboratorio Nacional de Luz Sincrotron (LNLS), Campinas, SP (Brazil)

2012-07-01

Full text: The National Alcohol Program (Proalcool) is a successful Brazilian renewable fuel initiative aiming to reduce the country's oil dependence. Producing ethanol from sugar cane, the program has shown positive results although accompanied by potential damage. The environmental impact mainly derives from the particulate matter emissions due to sugarcane burning, which is potentially harmful to human health. The physical activity of sugarcane workers is repetitive and exhaustive and is carried out in presence of dust, smoke and soot. The efforts by the sugarcane workers during the labor process result in increased risks of nervous, respiratory and cardiovascular system diseases and also in premature death. The aim of the present study was to investigate the effect of occupational stress on protein and metabolic profile of sugarcane workers. Forty serum samples were analyzed by 1-DE and LC MS/MS proteomic shotgun strategy and nuclear magnetic resonance (NMR). A set of proteins was found to be altered in workers after crops when compared with controls. The analysis of NMR spectra by Chenomx also showed differences in the expression of metabolites. For example, lactate displayed higher levels in control subjects than in sugarcane workers, and vice versa for the acetate. The concentrations of the two metabolites were lower after the crop, except in the case of acetate, which remained uniform in the control subjects before and after the crop. The present findings can have important application for rational designs of preventive measures and early disease detection in sugarcane workers. (author)

Study of protein and metabolic profile of sugarcane workers

International Nuclear Information System (INIS)

Polachini, G.M.; Tajara, E.H.; Santos, U.P.; Zeri, A.C.M.; Paes Leme, A.F.

2012-01-01

Full text: The National Alcohol Program (Proalcool) is a successful Brazilian renewable fuel initiative aiming to reduce the country's oil dependence. Producing ethanol from sugar cane, the program has shown positive results although accompanied by potential damage. The environmental impact mainly derives from the particulate matter emissions due to sugarcane burning, which is potentially harmful to human health. The physical activity of sugarcane workers is repetitive and exhaustive and is carried out in presence of dust, smoke and soot. The efforts by the sugarcane workers during the labor process result in increased risks of nervous, respiratory and cardiovascular system diseases and also in premature death. The aim of the present study was to investigate the effect of occupational stress on protein and metabolic profile of sugarcane workers. Forty serum samples were analyzed by 1-DE and LC MS/MS proteomic shotgun strategy and nuclear magnetic resonance (NMR). A set of proteins was found to be altered in workers after crops when compared with controls. The analysis of NMR spectra by Chenomx also showed differences in the expression of metabolites. For example, lactate displayed higher levels in control subjects than in sugarcane workers, and vice versa for the acetate. The concentrations of the two metabolites were lower after the crop, except in the case of acetate, which remained uniform in the control subjects before and after the crop. The present findings can have important application for rational designs of preventive measures and early disease detection in sugarcane workers. (author)

Hemoglobinopatias em trabalhadores expostos à riscos ocupacionais Hemoglobinopathies in workers exposed to occupational hazards

Directory of Open Access Journals (Sweden)

Isaac L. Silva Filho

2002-12-01

Full Text Available Hemoglobinopathies have been considered the most frequent hereditary disease in Brazilian population, constituting a Public Health problem. This paper reports on screening in workers at FIOCRUZ-RJ., exposed to some hazards factors such as, chemical substances, radiation, excessive cold and heat etc., with the objective of evaluating the impact of these factors in carriers of hemoglobinopathies, mainly in sickle cell trait (AS.

Occupational noise-induced tinnitus: does it affect workers' quality of life?

Science.gov (United States)

Muluk, Nuray Bayar; Oguztürk, Omer

2008-02-01

This prospective study aimed to investigate the quality of life of workers in a steel factory. The study group was composed of 16 male workers with tinnitus and 30 ears. Fifteen male workers without tinnitus and 30 ears were included into the control group. Workers were evaluated by questionnaire, pure-tone audiometry, and the SF-36 Health Survey. In the study group, tinnitus loudness levels (TLLs) were found. In the study group, the domains general mental health and role limitations owing to emotional problems were significantly lower than in the control group. Older age, industrial noise exposure over a long period, higher noise exposure during work, and hearing loss secondary to occupational noise caused workers to experience higher TLLs. Earheadings protected workers more than earplugs, and TLLs were lower. Important factors that affect workers' quality of life are maximum exposed noise levels, daily and total noise exposure time, and exposure to continuous noise. Occupational noise-induced tinnitus mainly causes emotional disability rather than physical disability. Emotionally impaired QOL results may be due to tinnitus-related psychological problems. Workers should have knowledge about the hazardous effects of noise. Periodic health checkups and regular seminars have great importance. Workers must be aware of other ototoxic factors, such as medications and noisy music. In the future, researchers should develop a screening method to detect those with a more hereditary affinity to hearing loss.

Psychiatric legal investigation for sickness benefits due to disability at the Brazilian Federal Social Security Special Court in Florianópolis, capital city of the State of Santa Catarina, southern Brazil.

Science.gov (United States)

Figueredo, Roberto; Damas, Fernando Balvedi

2015-01-01

To describe the profile of insured individuals that filed claims for sickness benefits and compare the results of the administrative and legal investigations. This case series included 114 insured persons that filed lawsuits against the Brazilian National Institute of Social Security (Instituto Nacional de Seguridade Social, INSS). They underwent psychiatric examinations required by the Brazilian Federal Social Security Special Court in Florianópolis from August to December 2010. Mean age was 47 years, and participant age ranged from 24 to 64 years. Most insured individuals were women (79%), and most were employed (67.5%) and self-employed (26.5%) workers. Mean contribution time was 99.9 months, ranging from 8 to 352 months. Mean benefit duration was 20.4 months, ranging from 2 to 97 months. The most prevalent category of workers was service workers, store and supermarket salespeople (54.4%), followed by administrative workers (19.3%). Only 17 participants were found to be unable to work after benefit cessation, a 14.9% mismatch between administrative and legal investigations. The most frequent diagnoses were mood disorders (59.6%) and anxiety disorders (17.5%).

Psychiatric legal investigation for sickness benefits due to disability at the Brazilian Federal Social Security Special Court in Florianópolis, capital city of the State of Santa Catarina, southern Brazil

Directory of Open Access Journals (Sweden)

Roberto Figueredo

2015-06-01

Full Text Available Objective: To describe the profile of insured individuals that filed claims for sickness benefits and compare the results of the administrative and legal investigations.Method: This case series included 114 insured persons that filed lawsuits against the Brazilian National Institute of Social Security (Instituto Nacional de Seguridade Social, INSS. They underwent psychiatric examinations required by the Brazilian Federal Social Security Special Court in Florianópolis from August to December 2010.Results: Mean age was 47 years, and participant age ranged from 24 to 64 years. Most insured individuals were women (79%, and most were employed (67.5% and self-employed (26.5% workers. Mean contribution time was 99.9 months, ranging from 8 to 352 months. Mean benefit duration was 20.4 months, ranging from 2 to 97 months. The most prevalent category of workers was service workers, store and supermarket salespeople (54.4%, followed by administrative workers (19.3%.Conclusions: Only 17 participants were found to be unable to work after benefit cessation, a 14.9% mismatch between administrative and legal investigations. The most frequent diagnoses were mood disorders (59.6% and anxiety disorders (17.5%.

Radiation effects-prevalence of contributory risk factors a pilot study in Visakhapthnam steel plant

International Nuclear Information System (INIS)

Lakshman rao, K. V.

2004-01-01

Integrated Steel Plants contribute significant air pollution, water pollution and solid waste generation. Diverse occupational health hazards present is steel industry pose ill effects to the industrial workers. Occupational health services and research center (OHS and RC) of this plant established in the year 1992 to protect the health and well-being of all the employees working in different occupations. the primary role OHS and RC is to conduct periodical medical examinations, monitoring of the working environments, suggest the suitable personal protective equipment to the workers, evaluate risk factors, work practices, risk management and industrial toxicological studies. Dissemination of information related to occupational health and safety to the working population through regular educational sessions at the workplaces as at training and development center (T and DC) is also part of our services. The proneness for effects of exposure to ionizing radiation is enhanced by various factors related to the family history of chronic diseases, nutritional status of the individuals, the lifestyle factors apart from psycho-social factors like illiteracy, ignorance, negligence and inadequate utilization of personal protective equipment (PPE) at workplace. To evaluate the prevalence of such contributory risk factors, a pilot study has been conducted in Visakhapatnam Steel Plant. The data is obtained through routine periodical medical examination of workers at the Occupational Health Services Center through standard format. The study revealed statistically high prevalence of the risk factors and indicated the necessity of intensifying primary prevention methods in addition to environmental control and usage of PPE. (Author)

Radiation effects-prevalence of contributory risk factors a pilot study in Visakhapthnam steel plant

Energy Technology Data Exchange (ETDEWEB)

Lakshman rao, K. V.

2004-07-01

Integrated Steel Plants contribute significant air pollution, water pollution and solid waste generation. Diverse occupational health hazards present is steel industry pose ill effects to the industrial workers. Occupational health services and research center (OHS and RC) of this plant established in the year 1992 to protect the health and well-being of all the employees working in different occupations. the primary role OHS and RC is to conduct periodical medical examinations, monitoring of the working environments, suggest the suitable personal protective equipment to the workers, evaluate risk factors, work practices, risk management and industrial toxicological studies. Dissemination of information related to occupational health and safety to the working population through regular educational sessions at the workplaces as at training and development center (T and DC) is also part of our services. The proneness for effects of exposure to ionizing radiation is enhanced by various factors related to the family history of chronic diseases, nutritional status of the individuals, the lifestyle factors apart from psycho-social factors like illiteracy, ignorance, negligence and inadequate utilization of personal protective equipment (PPE) at workplace. To evaluate the prevalence of such contributory risk factors, a pilot study has been conducted in Visakhapatnam Steel Plant. The data is obtained through routine periodical medical examination of workers at the Occupational Health Services Center through standard format. The study revealed statistically high prevalence of the risk factors and indicated the necessity of intensifying primary prevention methods in addition to environmental control and usage of PPE. (Author)

Development of the mathematical phantom of the brazilian man for internal dosimetry calculations

International Nuclear Information System (INIS)

Guimaraes, Maria Ines Calil Cury.

1995-01-01

This work covers the theory and construction of a Mathematical Phantom of the Brazilian, to be used in internal dosimetry. To obtain this it was necessary to develop antropometric data of mass and height for Brazilian man between 20 and 40 years old. Through Monte Carlo Method, and applying the Specific Absorbed Fraction (SAF) formalism, it was possible determine the fraction internal organs such as bones, skin and total body. The results obtained from SAF are primordial in nuclear medicine and great value in the calculation of the dose received by workers exposed and in accidental cases, to a rapid evaluation of the received by a simple person. Through SAF, the references obtained for the Brazilian man, can be noted when compared to the phantom calculated by Snyder, which proposed to represent the international reference man, showed by ICRP-23 publication, that the determined SAF of the whole body does not exceed 15% between the two phantoms, agreeing with the allowed international norms error margin permitted. The differences between the two models appear, when the numbers are presented for individual organs, where the emission origin are the lungs and taken as target, the red and yellow marrows, for an energy of 10 KeV. The result obtained is that these two marrows receive 64% more absorbed fractions in the Brazilian model than in the international model. These numbers are considered trustfully because the coefficient of variation does not exceed 7%, value that in under 50%, which makes the coefficient of variation not trustfully, this is considered out of the normal distribution. Facts like these and may others, showed in this work, determine the necessity to calculate a specific mathematical model for the Brazilian man. (author). 51 refs., 40 figs., 9 tabs

Resource mobilization for health advocacy: Afro-Brazilian religious organizations and HIV prevention and control.

Science.gov (United States)

Garcia, Jonathan; Parker, Richard G

2011-06-01

Brazil's national response to AIDS has been tied to the ability to mobilize resources from the World Bank, the World Health Organization, and a variety of donor agencies. The combination of favorable political economic opportunities and the bottom-up demands from civil society make Brazil a particularly interesting case. Despite the stabilization of the AIDS epidemic within the general Brazilian population, it continues to grow in pockets of poverty, especially among women and blacks. We use resource mobilization theories to examine the role of Afro-Brazilian religious organizations in reaching these marginalized populations. From December 2006 through November 2008, we conducted ethnographic research, including participant observation and oral histories with religious leaders (N = 18), officials from the National AIDS Program (N = 12), public health workers from Rio de Janeiro (N = 5), and non-governmental organization (NGO) activists who have worked with Afro-Brazilian religions (N = 5). The mobilization of resources from international donors, political opportunities (i.e., decentralization of the National AIDS Program), and cultural framings enabled local Afro-Brazilian religious groups to forge a national network. On the micro-level, in Rio de Janeiro, we observed how macro-level structures led to the proliferation of capacity-building and peer educator projects among these religious groups. We found that beyond funding assistance, the interrelation of religious ideologies, leadership, and networks linked to HIV can affect mobilization. Copyright © 2010 Elsevier Ltd. All rights reserved.

The experience of using an e-learning tool for radioprotection training for diagnostic radiology and health workers

International Nuclear Information System (INIS)

Lykawka, R.; Goulart, J.M.; Anés, M.; Dias, J.H.; Motta, V.B.; Bacelar, A.

2017-01-01

Radiation protection training is a subject issue addressed in Brazilian health care regulation and intends to create safer procedures and facilities. In this paper we report our experience on implementing an e-learning radiation protection course for radiation occupationally workers and a specific course for non-occupationally workers. The attendees were selected respecting their occupancies and the evaluation about radiation exposure risk. We compared attendee ratio for presential and e-learning for both courses. The course 1 has achieve for presential 25,54% and for e-learning 78,82%, and course 2 for presential 4,90% and 80,97% for e-learning. The e-learning platform has become a suitable tool to increase the adherence of radiation exposed and non-exposed occupationally workers. (author)

The experience of using an e-learning tool for radioprotection training for diagnostic radiology and health workers

Energy Technology Data Exchange (ETDEWEB)

Lykawka, R.; Goulart, J.M.; Anés, M.; Dias, J.H.; Motta, V.B.; Bacelar, A., E-mail: manes@hcpa.edu.br [Hospital de Clínicas de Porto Alegre, RS (Brazil). Serviço de Física Médica e Radioproteção

2017-07-01

Radiation protection training is a subject issue addressed in Brazilian health care regulation and intends to create safer procedures and facilities. In this paper we report our experience on implementing an e-learning radiation protection course for radiation occupationally workers and a specific course for non-occupationally workers. The attendees were selected respecting their occupancies and the evaluation about radiation exposure risk. We compared attendee ratio for presential and e-learning for both courses. The course 1 has achieve for presential 25,54% and for e-learning 78,82%, and course 2 for presential 4,90% and 80,97% for e-learning. The e-learning platform has become a suitable tool to increase the adherence of radiation exposed and non-exposed occupationally workers. (author)

Evaluation of the susceptibility to corrosion by pites of supermartensitic stainless steel with different superficial finishing

International Nuclear Information System (INIS)

Freitas, Mario Jose Bueno de Souza

2015-01-01

The objective of this study is to evaluate the susceptibility by pitting corrosion in a supermartensitic stainless steel (13%Cr) with different surface finishes, in an environment that simulates the conditions found in the range of the Brazilian marine subsoil before the dense layer of salt - the so-called pre-salt. In this study were conducted electrochemical tests of potentiodynamic anodic polarization and electrochemical impedance spectroscopy (EIS) in environment containing 35, 50 and 190 g/L of NaCl and dissolved oxygen concentrations <10, 100 and 500ppb. Were also used the techniques of Moessbauer spectroscopy and EDS (Energy Dispersive Spectrometry) coupled to a scanning electron microscope (SEM) for microstructural characterization of 13%Cr steel. It was observed by the electrochemical tests, the increase in the concentration of chloride ions in solution makes the studied steel more susceptible to localized corrosion. It was also observed that the material showed less susceptibility to pitting corrosion when its surface was less rough. (author)

[Surveillance on pesticides: quantification of use and prediction of impact on health, work and the environment for Brazilian municipalities].

Science.gov (United States)

Pignati, Wanderlei; Oliveira, Noemi Pereira; da Silva, Ageo Mário Cândido

2014-12-01

This paper analyzes the quantity, type and toxicity of pesticides used per hectare in the State of Mato Grosso as a surveillance strategy for the health of workers, the population in general and the environment, and to serve as a surveillance indicator for Brazilian cities. Brazil cultivated 95 million hectares in 2012, and Mato Grosso was the major consumer of pesticides. In this research, the database of the Agriculture and Livestock Defense Institute was consulted, as it records the prescribed agronomic data and place of use in sales invoices. The results reveal the average consumption of pesticides per hectare per crop: 12 liters for soy; 6 liters for corn; 4.8 liters for sugarcane; and 24 liters for cotton. The toxicological types and classes of pesticides used per hectare per crop were also monitored. Using a matrix of agricultural production and pesticide consumption, it was also found that certain health problems are correlated with the major producing regions. Based on pesticide consumption, agricultural production and pesticide toxicity it is possible to ascertain health problems in Brazilian cities and establish prevention and surveillance strategies for the workers, the environment and the populations exposed to pesticides.

The effect of multiple sclerosis on the professional life of a group of Brazilian patients

Directory of Open Access Journals (Sweden)

Yára Dadalti Fragoso

2010-12-01

Full Text Available OBJECTIVE: To assess the impact of multiple sclerosis (MS on the professional life of Brazilian patients. METHOD: One hundred MS patients were randomly selected from the database of the Brazilian Multiple Sclerosis Association (ABEM. An individual interview was carried out by telephone by a member of ABEM, who collected data on the patients' clinical status, educational level and professional lives. RESULTS: Complete data were obtained from 96 patients (27 males and 69 females aged 55.0±14.1 years, with average disease duration of 4.6±4.0 years. Eighty percent had eleven or more years of schooling. Among the whole group, 66% did not present limitations on walking. The longer the disease duration and the older the patient were, the higher the chances were that the patient was retired or receiving workers' compensation benefits. However, even among patients with MS for less than five years, the rate of non-participation in the workforce was 47.7%. Fatigue, paresthesia, cognitive dysfunction and pain were often cited as the motives for not working. CONCLUSION: MS patients presented high levels of unemployment, retirement and receipt of workers' compensation benefits, despite their high schooling levels. Age, disease duration and disability influenced these results for the whole group. However, even among younger patients with shorter disease duration and low disability, this finding remained.

Alternative to Nitric Acid for Passivation of Stainless Steel Alloys

Science.gov (United States)

Lewis, Pattie L.; Kolody, Mark; Curran, Jerry

2013-01-01

Corrosion is an extensive problem that affects the Department of Defense (DoD) and National Aeronautics and Space Administration (NASA). The deleterious effects of corrosion result in steep costs, asset downtime affecting mission readiness, and safety risks to personnel. Consequently, it is vital to reduce corrosion costs and risks in a sustainable manner. The DoD and NASA have numerous structures and equipment that are fabricated from stainless steel. The standard practice for protection of stainless steel is a process called passivation. Typical passivation procedures call for the use of nitric acid; however, there are a number of environmental, worker safety, and operational issues associated with its use. Citric acid offers a variety of benefits including increased safety for personnel, reduced environmental impact, and reduced operational cost. DoD and NASA agreed to collaborate to validate citric acid as an acceptable passivating agent for stainless steel. This paper details our investigation of prior work developing the citric acid passivation process, development of the test plan, optimization of the process for specific stainless steel alloys, ongoing and planned testing to elucidate the process' resistance to corrosion in comparison to nitric acid, and preliminary results.

Ergonomics and design in the Brazilian agricultural sector: a proposal to build matrix of contradictions.

Science.gov (United States)

Tosetto, Thaís; Camarotto, João Alberto

2012-01-01

The paper presents a correlation between the parameters of classical TRIZ and variables of analysis of the EWA to construct a matrix of contradictions in ergonomics, with the objective of assisting the designing processes in the Brazilian agricultural sector. Given the representativeness of the sector in the economy, the boundary conditions in which the activities are developed and their impact on the health of workers, this proposal should contribute to the development of adaptable solutions and the promotion of Decent Work.

Returning to the "homeland": work-related ethnic discrimination and the health of Japanese Brazilians in Japan.

Science.gov (United States)

Asakura, Takashi; Gee, Gilbert C; Nakayama, Kazuhiro; Niwa, Sayuri

2008-04-01

We investigated whether self-reported ethnic discrimination in the workplace was associated with well-being among Japanese Brazilians who had returned to Japan. Further, we examined interactions between discrimination and education on well-being. We obtained data from a cross-sectional survey of Japanese Brazilian workers (n = 313) conducted in 2000 and 2001. Outcomes were self-rated health, psychological symptoms as measured by the 12-item General Health Questionnaire (GHQ-12) score, and a checklist of somatic symptoms. Reports of ethnic discrimination were associated with increased risk of poor self-rated health and psychological symptoms (GHQ-12 score), after we controlled for self-assessed workload, supportive relations at work, physically dangerous working conditions, workplace environmental hazards, shift work, number of working hours, age, gender, marital status, income, education, Japanese lineage, length of residence, and Japanese language proficiency. Further, the relationship between discrimination and self-rated health and somatic symptoms was most robust for those with the least education. Ethnic discrimination appears to be a correlate of morbidity among Japanese Brazilian migrants. Future research should investigate how educational and workplace interventions may reduce discrimination and possibly improve health.

Estimation of respiratory heat flows in prediction of heat strain among Taiwanese steel workers.

Science.gov (United States)

Chen, Wang-Yi; Juang, Yow-Jer; Hsieh, Jung-Yu; Tsai, Perng-Jy; Chen, Chen-Peng

2017-01-01

International Organization for Standardization 7933 standard provides evaluation of required sweat rate (RSR) and predicted heat strain (PHS). This study examined and validated the approximations in these models estimating respiratory heat flows (RHFs) via convection (C res ) and evaporation (E res ) for application to Taiwanese foundry workers. The influence of change in RHF approximation to the validity of heat strain prediction in these models was also evaluated. The metabolic energy consumption and physiological quantities of these workers performing at different workloads under elevated wet-bulb globe temperature (30.3 ± 2.5 °C) were measured on-site and used in the calculation of RHFs and indices of heat strain. As the results show, the RSR model overestimated the C res for Taiwanese workers by approximately 3 % and underestimated the E res by 8 %. The C res approximation in the PHS model closely predicted the convective RHF, while the E res approximation over-predicted by 11 %. Linear regressions provided better fit in C res approximation (R 2  = 0.96) than in E res approximation (R 2  ≤ 0.85) in both models. The predicted C res deviated increasingly from the observed value when the WBGT reached 35 °C. The deviations of RHFs observed for the workers from those predicted using the RSR or PHS models did not significantly alter the heat loss via the skin, as the RHFs were in general of a level less than 5 % of the metabolic heat consumption. Validation of these approximations considering thermo-physiological responses of local workers is necessary for application in scenarios of significant heat exposure.

Brazilian Consensus on Photoprotection

Science.gov (United States)

Schalka, Sérgio; Steiner, Denise; Ravelli, Flávia Naranjo; Steiner, Tatiana; Terena, Aripuanã Cobério; Marçon, Carolina Reato; Ayres, Eloisa Leis; Addor, Flávia Alvim Sant'anna; Miot, Helio Amante; Ponzio, Humberto; Duarte, Ida; Neffá, Jane; da Cunha, José Antônio Jabur; Boza, Juliana Catucci; Samorano, Luciana de Paula; Corrêa, Marcelo de Paula; Maia, Marcus; Nasser, Nilton; Leite, Olga Maria Rodrigues Ribeiro; Lopes, Otávio Sergio; Oliveira, Pedro Dantas; Meyer, Renata Leal Bregunci; Cestari, Tânia; dos Reis, Vitor Manoel Silva; Rego, Vitória Regina Pedreira de Almeida

2014-01-01

Brazil is a country of continental dimensions with a large heterogeneity of climates and massive mixing of the population. Almost the entire national territory is located between the Equator and the Tropic of Capricorn, and the Earth axial tilt to the south certainly makes Brazil one of the countries of the world with greater extent of land in proximity to the sun. The Brazilian coastline, where most of its population lives, is more than 8,500 km long. Due to geographic characteristics and cultural trends, Brazilians are among the peoples with the highest annual exposure to the sun. Epidemiological data show a continuing increase in the incidence of non-melanoma and melanoma skin cancers. Photoprotection can be understood as a set of measures aimed at reducing sun exposure and at preventing the development of acute and chronic actinic damage. Due to the peculiarities of Brazilian territory and culture, it would not be advisable to replicate the concepts of photoprotection from other developed countries, places with completely different climates and populations. Thus the Brazilian Society of Dermatology has developed the Brazilian Consensus on Photoprotection, the first official document on photoprotection developed in Brazil for Brazilians, with recommendations on matters involving photoprotection. PMID:25761256

[Carpal tunnel syndrome and steel industry].

Science.gov (United States)

Caciari, T; Rosati, M V; Casale, T; Sancini, A; Giubilati, R; De Sio, S; Suppi, A; Tomei, G; Santoro, L; Scala, B; Nardone, N; Tomei, F

2013-01-01

The carpal tunnel syndrome (CTS) is a common working pathology. The CTS diagnosis is not so easy because neurophysiological investigations are necessary. The purpose of this study is to evaluate the working risks and the presence of CTS signs using a focused anamnestic and clinical procedure. We evaluated the working risks of CTS in a population of 65 male workers of a steel industry (average age 25.1 and seniority 2.82), performing 5 different tasks. The Borg Scale was used to evaluate the subjective muscle effort. Diurnal paresthesia (V1FG), nocturnal paresthesia (V1FN), hypersensitivity (V1IS), hypostenia (V1IT) were considered. We identified three main working risks repetitiveness of single actions, static and prolonged posture of the truck, muscle effort. 21.5% of the workers showed at least one of the three symptoms;13.8% showed one or more symptoms; the clinical objectivity was observed in 18.5%. A relation between V1FG, V1FN, clinical objective linked to the workers age of the task 1 (p =0.035) is showed. To prevent CTS, the use of the Borg Scale associated with identification of the risks and with the anamenstic-clinical investigation is useful to discriminate people at risk of CTS.

Attitudes towards money and motivational orientation to work in Brazilian young workers

OpenAIRE

Monteiro, Danielli Leite Campos; Peñaloza, Verónica; Pinto, Francisco Roberto; Denegri Coria, Marianela del Carmen; Orellana Calderón, Ligia María

2015-01-01

Self-determination theory assumes that there are two motivational orientations: intrinsic and extrinsic motivation. Money is a means to different ends, thus considered an external source of motivation, but individuals may also attribute other meanings to it. The aim of this research was to study the relationship between motivational orientation and the attitude towards money in young employees in Brazil. The sample consisted of 163 young workers attending a Business Administration program at ...

Pharmacogenetics in the Brazilian population

Directory of Open Access Journals (Sweden)

Guilherme eSuarez-Kurtz

2010-10-01

Full Text Available Brazil is the 5th largest country in the world and its present population, in excess of 190 million, is highly heterogeneous, as a result of centuries of admixture between Amerindians, Europeans and Sub-Saharan Africans. The estimated individual proportions of biogeographical ancestry vary widely and continuously among Brazilians, most individuals - irrespective of self-identification as White, Brown or Black, the major categories of the Brazilian Census race/color system - having significant degrees of European and African ancestry, while a sizeable number display also Amerindian ancestry. These features have important pharmacogenetic (PGx implications: first, extrapolation of PGx data from relatively well-defined ethnic groups is clearly not applicable to the majority of Brazilians; second, the frequency distribution of polymorphisms in pharmacogenes (e.g. CYP3A5, CYP2C9, GSTM1, ABCB1, GSTM3, VKORC, etc varies continuously among Brazilians and is not captured by race/color self-identification; third, the intrinsic heterogeneity of the Brazilian population must be acknowledged in the design and interpretation of PGx studies in order to avoid spurious conclusions based on improper matching of study cohorts. The peculiarities of PGx in Brazilians are illustrated with data for different therapeutic groups, such as anticoagulants, HIV-protease inhibitors and nonsteroidal antinflammatory drugs, and the challenges and advantages created by population admixture for the study and implementation of PGx are discussed. PGx data for Amerindian groups and Brazilian-born, first generation Japanese are presented to illustrate the rich diversity of the Brazilian population. Finally, I introduce the reader to the Brazilian Pharmacogenetic Network or Refargen (www.refargen.org.br, a nationwide consortium of research groups, with the mission to provide leadership in PGx research and education in Brazil, with a population health impact.

The Importance of Workplace Learning for Trade Unions: A Study of the Steel Industry

Science.gov (United States)

Stroud, Dean; Fairbrother, Peter

2008-01-01

This paper is concerned with the relationship between trade unions and learning in the workplace, particularly in relation to the enhancement of worker employability profiles. With the restructuring and modernising of the European steel industry as its context, this paper argues that the organisational and structural features of a sector have a…

Brazilian readers and contextual reference Brazilian readers and contextual reference

Directory of Open Access Journals (Sweden)

Lilia M. O. Carioni

2008-04-01

Full Text Available This article describes an experiment carried out using Brazilian university students at UFSC, the purpose being to check comprehension relationships between two types of contextual reference and two languages, Portuguese and English. A major stimulus for the research was the question: are Brazilian students' difficulties in reading English related more to English language difficulties or to difficulties in processing text in general?

Life Expectancy of Brazilian Neurosurgeons.

Science.gov (United States)

Botelho, Ricardo Vieira; Jardim Miranda, Bárbara Cristina; Nishikuni, Koshiro; Waisberg, Jaques

2018-06-01

Life expectancy (LE) refers to the number of years that an individual is expected to survive. Emphasis is frequently placed on the relationship between LE and the conditions under which a population lives, but fewer studies have investigated the relationship between stress factors associated with specific professions and their effects on LE. The aim of this study is to evaluate Brazilian neurosurgeons' life expectancies (BNLEs) and compare them with those of physicians (both Brazilian and foreign) from other fields, as well as with Brazilian nondoctors. The Brazilian Society of Neurosurgery death registry was used to obtain data that compared LEs from non-neurosurgeon physicians, as described in the national and international literature. BNLEs were also compared with the LEs of Brazilian citizens. Fifty-one neurosurgeons died between 2009 and 2016. All were males. The mean age at death was 68.31 ± 17.71 years. Among all-cause mortality, the breakdown was 20% cardiovascular diseases, 39% malignancies, 10% external factors, 6% gastrointestinal disorders, 12% neurologic illnesses, and 14% unknown causes. BNLE was shorter than LE of male Brazilian citizens. LE was similar among neurosurgeons and other doctors but shorter compared with Brazilian citizens. Further research is needed to provide data that can add to and confirm these results. Copyright © 2018 Elsevier Inc. All rights reserved.

Mental disorders among health workers in Brazil

Directory of Open Access Journals (Sweden)

Berenice Scaletzky Knuth

2015-08-01

Full Text Available AbstractThe scope of this article is to deter mine the prevalence of common mental disorders (CMD and Depression among Community Health Agents (CHA and employees of Psychosocial Care Centers (CAPS. It is a cross-sectional descriptive study involving the target population of Community Health Workers and Psychosocial Care Center workers, linked to the Municipal Health Department of Pelotas in the Brazilian State of Rio Grande do Sul. The presence of common mental disorders was considered when the Self Report Questionnaire (SRQ was > 7 and the occurrence of depression when BDI > 12. In total, 257 professionals participated in the study. Among mental health professionals (n = 119, the prevalence of CMDs was 25.2% and depression was 23.5%, while the prevalence of CMDs was 48.6% and depression was 29% among CHA (n = 138. The ratio of CMDs between the two groups of professionals was statistically different (p < 0.001. In this study, it was observed that the CAPS professionals are more adapted to work issues, with less perceived health problems arising from work and with a lower prevalence of mental disorders compared to CHA.

The Brazilian Nuclear Energy Program

International Nuclear Information System (INIS)

Carvalho, H.G. de

1980-01-01

A survey is initially of the international-and national situation regarding energetic resources. The Brazilian Nuclear Energy Policy and the Brazilian Nuclear Program are dealt with, as well as the Nuclear Cooperation agreement signed with the Federal Republic of Germany. The situation of Brazil regarding Uranium and the main activities of the Brazilian Nuclear Energy Commission are also discussed [pt

Rural education in brazilian education: contradictions and perspective

Directory of Open Access Journals (Sweden)

Adriana D'Agostini

2012-09-01

Full Text Available This work focuses on the rural education. It aimed to analyze and discuss the rural education in the Brazilian educational context, indicating its character and its importance from the 1990s in the perspective of building an education aimed at human emancipation and that contradictory it is also supported and guided by neoliberal educational policies. From the studies of production on rural education was found challenges, problems, difficulties and contradictions that permeate the attempt to create a perspective of rural education. The concept of rural education was initially developed within the Movement of Landless Workers (MST and other social movements from the political pressure and demands for the state to take over public education / field took dimension of public policy. This complex situation currently directs rural schools, a critical perspective that seeks an education beyond the capital.

Brazilian two-component TLD albedo neutron individual monitoring system

Energy Technology Data Exchange (ETDEWEB)

Martins, M.M., E-mail: marcelo@ird.gov.b [Instituto de Radioprotecao e Dosimetria (IRD), Av. Salvador Allende, s/n, CEP: 22780-160, Rio de Janeiro, RJ (Brazil); Mauricio, C.L.P., E-mail: claudia@ird.gov.b [Instituto de Radioprotecao e Dosimetria (IRD), Av. Salvador Allende, s/n, CEP: 22780-160, Rio de Janeiro, RJ (Brazil); Fonseca, E.S. da, E-mail: evaldo@ird.gov.b [Instituto de Radioprotecao e Dosimetria (IRD), Av. Salvador Allende, s/n, CEP: 22780-160, Rio de Janeiro, RJ (Brazil); Silva, A.X. da, E-mail: ademir@con.ufrj.b [Coordenacao dos Programas de Pos-Graduacao em Engenharia, COPPE/PEN Caixa Postal 68509, CEP: 21941-972, Rio de Janeiro, RJ (Brazil)

2010-12-15

Since 1983, Instituto de Radioprotecao e Dosimetria, Brazil, uses a TLD one-component albedo neutron monitor, which has a single different calibration factor specifically for each installation type. In order to improve its energy response, a two-component albedo monitor was developed, which measure the thermal neutron component besides the albedo one. The two-component monitor has been calibrated in reference neutron fields: thermal, five accelerator-produced monoenergetic beams (70, 144, 565, 1200 and 5000 keV) and five radionuclide sources ({sup 252}Cf, {sup 252}Cf(D{sub 2}O), {sup 241}Am-Be, {sup 241}Am-B and {sup 238}Pu-Be) at several distances. Since January 2008, mainly Brazilian workers who handle neutron sources at different distances and moderation, such as in well logging and calibration facilities are using it routinely.

Study on Mechanical Features of Brazilian Splitting Fatigue Tests of Salt Rock

Directory of Open Access Journals (Sweden)

Weichao Wang

2016-01-01

Full Text Available The microtest, SEM, was carried out to study the fracture surface of salt rock after the Brazilian splitting test and splitting fatigue test were carried out with a servo-controlled test machine RMT-150B. The results indicate that the deviation of using the tablet splitting method is larger than that of using steel wire splitting method, in Brazilian splitting test of salt rock, when the conventional data processing method is adopted. There are similar deformation features in both the conventional splitting tests and uniaxial compression tests. The stress-strain curves include compaction, elasticity, yielding, and failure stage. Both the vertical deformation and horizontal deformation of splitting fatigue tests under constant average loading can be divided into three stages of “loosening-tightness-loosening.” The failure modes of splitting fatigue tests under the variational average loading are not controlled by the fracturing process curve of the conventional splitting tests. The deformation extent of fatigue tests under variational average loading is even greater than that of conventional splitting test. The tensile strength of salt rock has a relationship with crystallization conditions. Tensile strength of thick crystal salt rock is lower than the bonded strength of fine-grain crystals.

Contribution to the Brazilian legislation in nuclear energy field

International Nuclear Information System (INIS)

Barbosa, Jose Alberto Maia

2009-01-01

Nuclear technology: to keep its domain is actually considered a differential for a country in relation to other ones, being able to represent an international threat to be contained or an aspect on technological and political valorization for those ones with recognized international credibility. Face to a raising use of new technologies in the field and the requirement asking for regulation in accordance with international safety standards, in order to assure its employment, the objective of this study was to demonstrate whether occupational and environmental radioprotection performed in our country is within radiological and nuclear safety international standards, and so it was updated and revised the Brazilian law in nuclear energy area, by comparing it with European Union, contextualized strong and weak points from national law, indicating criticisms and suggestions, in order that modifications will be able to be accomplished, aiming to its adequacy to international standards. The considered hypothesis showed that are required changes in the regulation structure in Brazilian nuclear area, aiming to the creation of a regulator agency of nuclear activities, with the purpose of assuring that the state of art and of technology, in terms of nuclear safety, to be the basis of the exercise related to their normative, control and safety assessment activities, on environment preservation, public and workers health, face to nuclear energy applications. (author)

Effect of peracetic acid on biofilms formed by Listeria monocytogenes strains isolated from a Brazilian cheese processing plant

Directory of Open Access Journals (Sweden)

Sarah Hwa In Lee

2017-10-01

Full Text Available ABSTRACT This study aimed to investigate the effect of peracetic acid (PAA, 0.5% on adherent cells of three strains of Listeria monocytogenes strains belonging to serotypes 4b and 1/2b that had been previously isolated from the environment of a Brazilian cheese plant. The assays were conducted using polystyrene microplates and stainless steel coupons and the adhered cells were treated with PAA for 60, 120 and 180 s. On stainless steel, biofilms were partially inactivated by PAA after 60 s and almost 100% of the cells were damaged within 180 s using epifluorescence microscopy with LIVE/DEAD® staining. On polystyrene microplates, PAA decreased (P<0.05 biofilm biomass produced by the three L. monocytogenes isolates at 60 s, when compared with controls (no PAA treatment. However, PAA did not completely eliminate L. monocytogenes cells on polystyrene microplates (decreasing 1.8-2.5 log cycles after treatment with PAA for 180 s. The correct concentration and contact time of PAA is critical for eliminating biofilms formed by L. monocytogenes on stainless steel surfaces, although further studies are needed for defining efficient PAA treatments to remove adherent cells of this pathogen on plastic polymers.

Welding of Nb micro-alloyed steel by the submerged arc process using Brazilian consumables

International Nuclear Information System (INIS)

Scotti, A.; Quites, A.M.

1982-01-01

A set of procedures was established for welding of Nb micro-alloyed steel by the submerged arc process, using national consumables, in order to simultaneously achieve a more economic welding and better mechanical properties. From all the wire-flux combinations the better were the correspondent to AWS F84ED1, F74EM12K and F84EH14, the last being the best. (Author) [pt

Sports Injuries in Brazilian Blind Footballers

OpenAIRE

Silva, MPME; Morato, MP; Bilzon, JLJ; Duarte, E

2013-01-01

The purpose of this study was to assess the characteristics and prevalence of sports-related injuries in visually disabled athletes of the Brazilian football 5-a-side team. The participants were 13 male athletes, all classified as B1 visual class, members of the Brazilian team, who played in five consecutive international competitions. Data were collected using the Brazilian Paralympic Committee and the Brazilian Confederation of Sports for the Blind report form. From the total of 13 athletes...

An intervention for noise control of blast furnace in steel industry.

Science.gov (United States)

Golmohammadi, Rostam; Giahi, Omid; Aliabadi, Mohsen; Darvishi, Ebrahim

2014-01-01

Noise pollution is currently a major health risk factor for workers in industries. The aim of this study was to investigate noise pollution and implement a control intervention plan for blast furnace in a steel industry. The measurement of sound pressure level (SPL) along with frequency analysis was done with the sound-level-meter Cell-450. Personal noise exposure was performed using dosimeter TES-1345 calibrated with CEL-282. Before planning noise controls, acoustic insulation properties of the furnace control unit and workers' rest room were assessed. Control room and workers' rest room were redesigned in order to improve acoustical condition. The SPL before intervention around the Blast Furnace was 90.3 dB (L) and its dominant frequency was 4000 Hz. Besides, noise transmission loss of the control and rest rooms were 10.3 dB and 4.2 dB, respectively. After intervention, noise reduction rates in the control and rest rooms were 27.4 dB and 27.7 dB, respectively. The workers' noise dose before and after the intervention was 240% and less than 100%, respectively. Improvement the workroom acoustic conditions through noise insulation can be considered effective method for preventing workers exposure to harmful noise.

Identification of oxygen containing volatiles in cephalic secretions of workers of Brazilian stingless bees

Directory of Open Access Journals (Sweden)

Francke Wittko

2000-01-01

Full Text Available The volatile constituents of cephalic secrections of 11 Brazilian social stingless bee species of the Tetragonisca - Tetragona line have been analysed. By gas chromatography/mass spectrometry 145 compounds could be identified which include 72 esters, 22 alcohols, 16 carboxylic acids, 13 terpenoids, 8 aldehydes, 7 ketones, 4 aromatic compounds, 2 lactones and 1 dihydropyran. Structural relations, origin, and distribution of these compounds are discussed. With respect to qualitative and quantitative composition, each species shows a specific odour pattern which is made up by less specific components. To a certain extent, closely related species show some similarities in the odour bouquets. The mass spectrometric fragmentation patterns of typical wax type esters and DMDS derivatives of unsaturated esters are discussed in detail.

Brazilian energy

International Nuclear Information System (INIS)

O'Shaughnessy, H.

1997-04-01

Brazilian Energy provides all the information necessary for energy companies to invest and operate in Brazil, including: a review of Brazil's natural resources; an assessment of privatisation strategies at the federal, state and regional level; an analysis of the electricity industry and the future for Electrobras; an analysis of the oil industry and, in particular, Petrobras; a discussion of the fuel alcohol industry; the discovery of local natural gas, its prospects and the involvement of the auto industry; an assessment of the problems facing the coal industry and its future; a discussion of the regulatory framework for the newly privatised companies; the importance of intra-regional energy links and the booming membership of Mercosur; the difficulties experienced by foreign investors doing business in Brazil; brief profiles of the key energy companies; profiles of key people influencing the privatisation process in Brazil. Brazilian energy is essential reading for those wishing to advise and assist Brazil in this period of change and development, as well as those who wish to invest or become key players in the Brazilian energy sector. (author)

[Evaluation of Brazilian public policies to promote food security and fight hunger, 1995-2002. 2 - the Workers' Nutrition Program].

Science.gov (United States)

Pacheco Santos, Leonor Maria; Nazaré Araújo, Maria da Purificação; Martins, Maísa Cruz; Veloso, Iracema Santos; Assunção, Marilena Pacheco; Chaves dos Santos, Sandra Maria

2007-08-01

This study evaluated the Workers' Nutrition Program in Brazil from 1995 to 2002, from a structure-process-results perspective. The methodology involved documental research and a case study in 45 municipalities in the State of Bahia, resulting in 2,389 household interviews. In relation to structure, we analyzed the program's normative evolution until 2002. As for nutritional recommendations, the program shifted from insufficient calorie supply in the 1980s to a positive association between overweight and employment in companies adopting the Workers' Nutrition Program. In Bahia, overall program coverage was insufficient among the 5,120 adults 20 years or older who were interviewed. A significant difference was observed in access to food benefits among workers in the interior of the State (6.1%) as compared to the State capital, Salvador (26.1%). However, targeting was adequate: all workers benefiting from the program in the interior and 92.4% of those in Salvador earned less than five times the minimum wage (approximately US dollars 950/month). It is necessary to improve the program's coverage in the target population in order to raise workers' awareness about their rights and the actions developed by the program.

Activities and Ergonomics of Workers in Broiler Hatcheries

Directory of Open Access Journals (Sweden)

CCS Carvalho

2015-06-01

Full Text Available The objective this study was to assess ergonomic factors, posture and biomechanics of workers of a broiler egg hatchery. The analysis of ergonomic factors was based on physical work load, thermal environment, and exposure to light and noise. The posture of workers was analyzed using photographic records which were evaluated by the software program OWAS (Ovako Working Posture Analysing System. A biomechanics analysis was also performed based on the photographs taken of the employee at various angles, which were used as inputs to the Michigan two-dimensional biomechanical model software program. The results show that certain activities can be considered unhealthy due to the exposure of employees to physical and thermal overload. The continuous noise levels and lighting were outside the range considered adequate by the regulations of the Brazilian Ministry of Labor. The manner in which certain activities are carried out when associated with weight and poor posture can result in body lesions in broiler hatchery employees. It is therefore necessary to apply specific ergonomic programs, including scheduled breaks, training, and other measures in order to reduce or to eliminate the risks involved in these activities.

Ergonomics Intervention in Unit Blast Furnace of a Typical Steel Company

Directory of Open Access Journals (Sweden)

Majid Mo'tamed-Zadeh

2013-10-01

Full Text Available Objective: Musculoskeletal disorders are a major part of occupational diseases in working environments. Prevention of the occurrence of these problems requires the use of ergonomic assessment techniques and intervention to improve working conditions. The purpose of this study was to investigate the prevalence of musculoskeletal disorders in workers in the blast furnace unit and the intervention to reduce the prevalence of these disorders. Materials & Methods: This study conducted on 24 people working in the furnace unit. Medical records of furnace workers were reviewed and Nordic Musculoskeletal Questionnaires (NMQ was completed. Drilling operation and oxygenation task were assessed by using Rapid Entire Body Assessment (REBA and workers were given the necessary training. Work stations of oxygenation for 24 workers were redesign and Drilling operation was mechanized. And employed workers with musculoskeletal disorders were changed. REBA and NMQ were used to reassess the intervention effects. Results: According to medical records and results of NMQ about 37.5 percent of workers had musculoskeletal disorders. REBA final score was 11 and 10 for the drilling and oxygenation tasks respectively. After redesigning the workstation, REBA final score was 5 for the oxygenation task and the drilling operation removed by mechanized. With the amendment procedures of musculoskeletal disorders was reduced 17.5 percent. Conclusion: According to REBA Score, the risk of musculoskeletal disorders was reduced by implementing amendments to the furnace unit and prevalence of musculoskeletal disorders also significantly reduced. Keyword: Ergonomic, MSDs, REBA, NMQ, Steel

Feasibility study for a long-term follow-up in a historical cohort of Brazilian coal miners

Energy Technology Data Exchange (ETDEWEB)

Veiga, L.H.S.; Melo, V.P.; Amaral, E.C.S.; Koifman, S. [Inst. of Radioprotecao & Dosimetria, Rio de Janeiro (Brazil)

2007-09-15

The first Brazilian historical mortality cohort study on miners was conducted. The cohort consisted of 3224 workers in the underground coal mining industry in southern Brazil. This industry has been operating since 1942 without compliance with any regulatory standards, since there were no relevant national regulations. Over almost 60 years, about 5000 workers were exposed to high levels of radiation. However, later radiation exposure was significantly reduced, particularly that due to radon exposure. Recent radon concentration measurements indicated an average annual exposure to radon progeny of 2.1 WLM, ranging from 0.2 to 7.2 WLM. As radon exposure in the past was unknown, it can be suggested that mine workers have not been working safely as regards the health hazard related to radon and radon progeny exposure. The cohort inclusion criteria are as follows: (a) all male employees who had worked for at least one year at the coal mine; (b) workers with complete workplace information (underground and surface); (c) employment hiring between 1945 and 1997 and (d) the worker must have been alive on 1 January 1979. Through multiple strategies of search it was possible to follow up the members of the cohort with a success rate of 92%. This paper presents the characteristics of the study population and provides information about the feasibility of conducting a retrospective mortality study in Brazil, taking into account the methodological and logistical difficulties of conducting such a study in a developing country.

Feasibility study for a long-term follow-up in a historical cohort of Brazilian coal miners

International Nuclear Information System (INIS)

Veiga, L H S; Melo, V P; Amaral, E C S; Koifman, S

2007-01-01

The first Brazilian historical mortality cohort study on miners was conducted. The cohort consisted of 3224 workers in the underground coal mining industry in southern Brazil. This industry has been operating since 1942 without compliance with any regulatory standards, since there were no relevant national regulations. Over almost 60 years, about 5000 workers were exposed to high levels of radiation. However, later radiation exposure was significantly reduced, particularly that due to radon exposure. Recent radon concentration measurements indicated an average annual exposure to radon progeny of 2.1 WLM, ranging from 0.2 to 7.2 WLM. As radon exposure in the past was unknown, it can be suggested that mine workers have not been working safely as regards the health hazard related to radon and radon progeny exposure. The cohort inclusion criteria are as follows: (a) all male employees who had worked for at least one year at the coal mine; (b) workers with complete workplace information (underground and surface); (c) employment hiring between 1945 and 1997 and (d) the worker must have been alive on 1 January 1979. Through multiple strategies of search it was possible to follow up the members of the cohort with a success rate of 92%. This paper presents the characteristics of the study population and provides information about the feasibility of conducting a retrospective mortality study in Brazil, taking into account the methodological and logistical difficulties of conducting such a study in a developing country

Automated nuclear material recovery and decontamination of large steel dynamic experiment containers

International Nuclear Information System (INIS)

Dennison, D.K.; Gallant, D.A.; Nelson, D.C.; Stovall, L.A.; Wedman, D.E.

1999-01-01

A key mission of the Los Alamos National Laboratory (LANL) is to reduce the global nuclear danger through stockpile stewardship efforts that ensure the safety and reliability of nuclear weapons. In support of this mission LANL performs dynamic experiments on special nuclear materials (SNM) within large steel containers. Once these experiments are complete, these containers must be processed to recover residual SNM and to decontaminate the containers to below low level waste (LLW) disposal limits which are much less restrictive for disposal purposes than transuranic (TRU) waste limits. The purpose of this paper is to describe automation efforts being developed by LANL for improving the efficiency, increasing worker safety, and reducing worker exposure during the material cleanout and recovery activities performed on these containers

Knowledge Transfer in Product Development: an Analysis of Brazilian Subsidiaries of Multinational Corporations

Directory of Open Access Journals (Sweden)

Dusan Schreiber

2011-07-01

Full Text Available Several studies about knowledge transfer in multinational corporations have found that the process is influenced by factors such as absorptive capacity, tacit knowledge and power relations, all of which impact knowledge sharing strategies between corporate headquarters and foreign subsidiaries. A multiple case study of Brazilian subsidiaries of three multinational corporations using in-depth interviews, based on a conceptual model consisting of four propositions, was conducted to identify factors linked to the knowledge transfer process and to assess their influence on that transfer. The first proposition tries to assess explicit knowledge, primarily through the use of IT tools; the second analyzes the role of the subsidiary within the corporate network and how it influences the degree of knowledge sharing. The third assesses the influence of subsidiary absorptive capacity and the fourth analyzes the impact of worker exchange programs on knowledge sharing between headquarters and foreign subsidiaries. Study results confirm the four propositions and enable the identification of relationships between factors, especially explicit knowledge and worker expatriation as complementary factors in knowledge transfer strategies.

Using the Venom of a Snake for an Antidote: exploring strategies and services for sex workers in preparation for the World Cup 2014.

Science.gov (United States)

Ewen, Janine Elizabeth

2015-07-01

This article considers the public health implications that were predicted by sex workers a year prior to the FIFA World Cup 2014, with considerations towards the Olympic Games in 2016. Primary research conducted in 2013 in Brazil's second largest city, Rio de Janeiro, gave sex workers and civil society organizations the opportunity to voice concerns of the everyday disadvantages faced by those involved in the sex industry, with emphasis on what could cause further detriments from acting as a double draw international sporting host. This research largely took place through invitation at the 2013 Rio State Conference on HIV/AIDS, Equality and Human Rights. Mixed methods research - pre-arrival questionnaires and interviews led by a semi-structured interview guide - was deemed suitable for the primary research collection. The use of the research software NVivo allowed data to be categorised into key themes to form the basis of this research article. Working with a Portuguese translator, case studies of transsexual sex workers and civil society organizations were developed. Police violence was the main re-occurring theme expressed as a continued fear, alongside the added increase of security measures that the games would bring, to reduce organized crime, and through the Pacification programme. The majority of sex workers and organizations believed that there was no support from the Brazilian government to continue to provide services of high demand, including social care and legal assistance. Sex workers also felt prejudice in receiving HIV/AIDS treatment from government-led health services. A desirable outcome for the sex worker community would be for the government to consider the following: recommendations devised for further health and well being support; an act or law of non-violence against them; and recommendations to decimalize the sex industry. The Brazilian government has received global recognition for its response to the HIV/AIDS epidemic, however the

Smoking or health: the Brazilian option.

Science.gov (United States)

Lokschin, F; Barros, F C

1984-01-01

Tobacco plays a key role in both disease and the economy in Brazil. In 1981 about 135 billion cigarettes were smoked, and cigarette-related diseases far outnumber infections as the leading cause of death. Brazil is the 4th largest world producer and the 2nd largest exporter of tobacco. 2.1% of the total population -- 2.5 million people -- are maintained by tobacco-related activities. Cigarette sales taxes provide 11.6% of the country's total taxes. Involved in a deep economic crisis, Brazil depends on this revenue and has not introduced any measures to control or counteract the high pressure marketing of cigarette manufacturers. Ischemic heart disease is the leading cause of death in Brazil, taking 90,000 lives in 1979. Based on World Health Organization estimates, at least 25% of these deaths could be ascribed to smoking. Cancer is the 2nd largest cause of death. In 1979, 10% of 60,000 cancer deaths were from lung cancer. Based on estimate that 30% of cancer deaths are provoked by smoking, more than 20,000 of those deaths were caused by tobacco. In Brazil, lung cancer is the 2nd highest cause of death from cancer in men and 3rd among women. Smoking in Brazil is definitely associated with low birth weight, the single most important predictive factor of perinatal and infant mortality. Rural workers giving up subsistence crops to grow tobacco may also affect their children's health. Also in such low-income populations, expenditures for cigarettes leave less money for essential goods. As a result of the high tax rate and the enormous number of cigarettes sold, 11.6% of all the country's revenue comes from the tobacco industry. The Brazilian Association of Tobacco Industries has been trying to link cigarette sales to Brazilian social development but does not mention the cost of disease, disability, and early death provoked by smoking. In Brazil tobacco companies have a huge market free of constraints, and the country lacks consistent smoking control policies. Recently

78 FR 8588 - Rg Steel Sparrows Point LLC, Formerly Known as Severstal Sparrows Point LLC, a Subsidiary of RG...

Science.gov (United States)

2013-02-06

... Consulting, Crown Security, Eastern Automation, EDS(HP), Teksystems, URS Corporation, and B More Industrial... from B More Industrial Services LLC were employed on-site at the Sparrows Point, Maryland location of RG Steel Sparrows Point LLC. The Department has determined that these workers from B More Industrial...

Brazilian sparkling wine: A successful trajectory

Directory of Open Access Journals (Sweden)

Wurz Douglas André

2017-01-01

Full Text Available The objective of this study was to explore the evolution of internal and external commercialization of Brazilian sparkling wines during the period between 1986 and 2015, giving an overview of the current situation and its market trends, and highlighting the importance of Brazil in the world scenario for sparkling wines. This research is based on quantitative data sources provided by different institutions: International Organization of Vine and Wine (OIV, Brazilian Union of Viticulture (UVIBRA, Ministry of Agriculture, Livestock and Supply (MAPA and Brazilian Agricultural Research Corporation (EMBRAPA. Brazil is a promising country for the sparkling wine market. From 1986–2015, there was an increase of 465.6% in the sales of sparkling wine in the Brazilian domestic market, especially the last ten, which accounted for an increase of 215.7%. In 1998, Brazilian sparkling wines accounted for 70.5% of sparkling wines sold in Brazil. Today, they represent 82.1%of national market, and proved to be one of the most prestigious products from Brazilian viticulture when compared, for example, to non-sparkling wines, which 79% are imported wines. Of the imported sparkling wines consumed in Brazil, six countries account for 98.5% of the market (France: 32.7%; Italy: 24.8% and Spain: 21.9%. The volume exportation of Brazilian sparkling wine has grown significantly in recent years (4,210.2%, with Paraguay, China, Uruguay, the United States, France and the United Kingdom being the major buyers. The evolution of exports shows that Brazilian sparkling wine becomes an alternative to those produced in traditional countries, such as France, Italy and Spain, due to their quality and price. There is an increase in the commercialization of sparkling wines in the Brazilian domestic market, in addition to the growing participation of Brazil in the volume of exports in the world market, placing Brazil in a leading position in the production and sale of sparkling wines.

Microbial-Influenced Corrosion of Corten Steel Compared with Carbon Steel and Stainless Steel in Oily Wastewater by Pseudomonas aeruginosa

Science.gov (United States)

Mansouri, Hamidreza; Alavi, Seyed Abolhasan; Fotovat, Meysam

2015-07-01

The microbial corrosion behavior of three important steels (carbon steel, stainless steel, and Corten steel) was investigated in semi petroleum medium. This work was done in modified nutrient broth (2 g nutrient broth in 1 L oily wastewater) in the presence of Pseudomonas aeruginosa and mixed culture (as a biotic media) and an abiotic medium for 2 weeks. The behavior of corrosion was analyzed by spectrophotometric and electrochemical methods and at the end was confirmed by scanning electron microscopy. The results show that the degree of corrosion of Corten steel in mixed culture, unlike carbon steel and stainless steel, is less than P. aeruginosa inoculated medium because some bacteria affect Corten steel less than other steels. According to the experiments, carbon steel had less resistance than Corten steel and stainless steel. Furthermore, biofilm inhibits separated particles of those steels to spread to the medium; in other words, particles get trapped between biofilm and steel.

Hydrological studies in Brazilian Northeast

International Nuclear Information System (INIS)

1981-01-01

Studies carried on as a result of collaboration between the Federal University of Ceara, Brazil (research team) and the Brazilian Northeastern Bank (financing agency), aiming at a better knowledge of the hydrological problems of Brazilian Northeastern region, are described. (I.C.R.) [pt

Evaluation of the protection behaviour of reinforcement steel against corrosion induced by chlorides in reinforced mortar specimens

International Nuclear Information System (INIS)

Crivelaro, Marcos

2002-01-01

In this work various treatments for protecting reinforcing steels against corrosion induced by chlorides have been evaluated. Additives to mortars and surface treatments given to reinforcing steels were evaluated as corrosion protection measures. In the preliminary tests the corrosion resistance of a CA 50 steel treated by immersion in nearly 50 different solutions, was determined. The solutions were prepared with tannins (from various sources) and/or benzotriazole, and during immersion, a surface film formed on the steel. The corrosion resistance of the coated steels was evaluated in a saturated Ca(OH) 2 solution with 5% (wt) NaCl. Preliminary tests were also carried out with mortars reinforced with uncoated steel to which tannin or lignin was added. Two organic coatings, a monocomponent and a bicomponent type, formulated specially for this investigation, with both tannin and benzotriazole, were also tested in the preliminary tests to select the coating with better corrosion protection property. The bicomponent type (epoxy coating) showed better performance than the monocomponent type coating, and the former was therefore chosen to investigate the corrosion performance on CA 50 steel inside mortar specimens. From the preliminary tests, two solutions with tannin from two sources, Black Wattle (Acacia mearnsii) and Brazilian tea (Ilex paraguariensis St. Hill), to which benzotriazole and phosphoric acid were added, were chosen. Mortar specimens reinforced with CA50 steel treated by immersion in these two solutions were prepared. Also, epoxy coated CA50 steel was tested as reinforcement inside mortar specimens. Mortars reinforced with uncoated CA50 steel were also prepared and corrosion tested for comparison. The effect of tannin and lignin as separate additives to the mortar on the corrosion resistance of uncoated steel was also studied. The reinforced mortar specimens were tested with various cycles of immersion for 2 days in 3.5% (wt) NaCl followed by with air

Aircraft Steels

Science.gov (United States)

2009-02-19

component usage. PH 13-8Mo is a precipitation-hardenable martensitic stainless steel combining excellent corrosion resistance with strength. Custom 465 is...a martensitic , age-hardenable stainless steel capable of about 1,724 MPa (250 ksi) UTS when peak-aged (H900 condition). Especially, this steel can...NOTES 14. ABSTRACT Five high strength steels (4340, 300M, AerMet 100, Ferrium S53, and Hy-Tuf) and four stainless steels (High Nitrogen, 13

Clustering of Physical Inactivity in Leisure, Work, Commuting, and Household Domains: Data From 47,477 Industrial Workers in Brazil.

Science.gov (United States)

Del Duca, Giovâni F; Garcia, Leandro Martin Totaro; da Silva, Shana Ginar; da Silva, Kelly Samara; Oliveira, Elusa S; Barros, Mauro V; Nahas, Markus V

2015-09-01

Physical inactivity in each domain (leisure, work, commuting, and household) is not completely independent. This study aimed to describe the clustering of physical inactivity in different domains and its association with sociodemographic factors among Brazilian industrial workers. This was a cross-sectional, population-based study using data from 23 Brazilian states and the Federal District collected via questionnaires between 2006 and 2008. Physical inactivity in each domain was defined as nonparticipation in specific physical activities. Clustering of physical inactivity was identified using the ratio of the observed (O) and expected (E) percentages of each combination. Multinomial logistic regression was used to identify sociodemographic factors with the outcome. Among the 44,477 interviewees, most combinations exceeded expectations, particularly the clustering of physical inactivity in all domains among men (O/E = 1.37; 95% CI: 1.30; 1.44) and women (O/E = 1.47; 95% CI: 1.36; 1.60). Physical inactivity in 2 or more domains was observed more frequently in women, older age groups, individuals living without a partner, and those with higher education and income levels. Physical inactivity tends to be observed in clusters regardless of gender. Women and workers with higher income levels were the main factors associated with to be physically inactive in 2 or more domains.

Steel making

CERN Document Server

Chakrabarti, A K

2014-01-01

"Steel Making" is designed to give students a strong grounding in the theory and state-of-the-art practice of production of steels. This book is primarily focused to meet the needs of undergraduate metallurgical students and candidates for associate membership examinations of professional bodies (AMIIM, AMIE). Besides, for all engineering professionals working in steel plants who need to understand the basic principles of steel making, the text provides a sound introduction to the subject.Beginning with a brief introduction to the historical perspective and current status of steel making together with the reasons for obsolescence of Bessemer converter and open hearth processes, the book moves on to: elaborate the physiochemical principles involved in steel making; explain the operational principles and practices of the modern processes of primary steel making (LD converter, Q-BOP process, and electric furnace process); provide a summary of the developments in secondary refining of steels; discuss principles a...

Brazilian Portuguese Ethnonymy and Europeanisms.

Science.gov (United States)

Stephens, Thomas M.

1994-01-01

Delineates the incorporation and analyzes the impact of European borrowings in Brazilian racio-ethnic terminology. This overview covers French, Italian, Spanish, and English influences. Borrowings from European languages have had a small impact on the calculus of Brazilian racio-ethnic terms. (43 references) (Author/CK)

Assessment of iodine content in Brazilian duplicate portion diets and in table salt

International Nuclear Information System (INIS)

Maihara, V.A.; Moura, P.L.C.; Favaro, D.I.T.; Vasconcellos, M.B.A.

2008-01-01

Excess dietary intake may increase the risk for the hyperthyroidism in the elderly. This study investigated iodine dietary intake by epithermal neutron activation analysis (ENAA) analyzing duplicate portion diet and fortified table salt samples. Duplicate diet samples were obtained from a group of twenty-five steel mill workers from the city of Sao Paulo, over a 3-day period. The samples were freeze dried, mixed and homogenized. Fortified table salt brands were collected from the market and were analyzed with no pre-treatment. Assays for the iodine concentration in the table salt samples revealed values between 24 to 65 mg/kg. The average iodine daily intake for the worker's diets was 813 μg/day, ranging from 402 to 1363 μg/day. In some cases daily intakes were around 10 times higher than the recommended dietary allowance (RDA) value (150 μg/day). (author)

The rise of Brazilian agriculture

DEFF Research Database (Denmark)

Jensen, Hans Grinsted; Vink, Nick; Sandrey, Ron

2014-01-01

of Brazilian agricultural policies, namely farmer support, the research and technology transfer system and land issues. The implications for South African agriculture can be summarized as the recognition that history, geography, the development path and agricultural policies all matter. The article......The purpose of this article is to explore some of the possible lessons for South African agriculture from the Brazilian experience. To this end, the article discusses the performance of Brazilian agriculture in terms of land and labour use, production, and exports. This is followed by aspects...... then identifies five important lessons for agricultural development in South Africa....

Monitoring of risk and protective factors for chronic non communicable diseases by telephone survey in Brazilian State Capitals, 2008.

Science.gov (United States)

Malta, Deborah Carvalho; da Silva, Sara Araújo; de Oliveira, Patrícia Pereira Vasconcelos; Iser, Betine Pinto Moehlecke; Bernal, Regina Tomie Ivata; Sardinha, Luciana Monteiro Vasconcelos; Moura, Lenildo de

2012-09-01

To estimate the prevalence of protective and risk factors for the most important chronic non communicable diseases in all Brazilian capitals, including the Federal District. Data used were collected in 2008 through VIGITEL, an ongoing population-based telephone survey surveillance system implemented in all Brazilian State capitals since 2006. In 2008, over 54,000 interviews were completed over the phone with a random sample of individuals living in all 27 capitals. The analyses showed differences in the prevalence of determinants of chronic diseases by demographic characteristics such as gender, age and schooling. Men were more likely to be current smokers, overweight, and consumers of soft drinks, fatty meat and alcohol. They were also more likely to be more active in leisure. Women reported being more likely to eat healthy, but also were more likely to have a physician diagnosis of high blood pressure, dyslipidemia, osteoporosis and overall poor health status. In general, the prevalence of risk factors studied increased with decreasing levels of schooling. The VIGITEL system was implemented to monitor changes in the prevalence of determinants of chronic diseases over time to inform public health workers and decision makers to adjust existing programs and policies according to the changing profile of consumers. The ultimate goal is to improve the health of the Brazilian population.

Life cycle carbon emissions inventory of brick masonry and light steel framing houses in Brasilia: proposal of design guidelines for low-carbon social housing

Directory of Open Access Journals (Sweden)

Lucas Rosse Caldas

Full Text Available Abstract This study evaluated the CO2eq emissions during the life cycle of two social housing projects in the city of Brasilia. A house of ceramic brick masonry was compared to a light steel framing one. The life cycle carbon emissions assessment (LCCO2A with a cradle-to-grave approach was used. The relation between the thermal performance of the wall systems and CO2eq emissions in the operational phase of the houses were evaluated using the DesignBuilder software. In addition, six scenarios composed of three CO2eq emission factors from the Brazilian electrical grid and two schedules of occupation of houses (full and part time were evaluated. The brick masonry house presented less CO2eq emissions than the light steel framing one. For both houses, the operational phase was the most significant regarding the total CO2eq emissions (50% to 70%, followed by the construction (20% to 30%, maintenance (11% to 20% and end-of-life (lower than 1% phases. The results also showed the importance of considering different CO2eq emission factors for the Brazilian context in the operational phase. Finally, based on the results obtained, design guidelines for low carbon social housing were proposed.

MIDAS (Migraine Disability Assessment: a valuable tool for work-site identification of migraine in workers in Brazil

Directory of Open Access Journals (Sweden)

Yara Dadalti Fragoso

Full Text Available CONTEXT: MIDAS was developed as a fast and efficient method for identification of migraine in need of medical evaluation and treatment. It was necessary to translate MIDAS, originally written in English, so as to apply it in Brazil and make it usable by individuals from a variety of social-economic-cultural backgrounds. OBJECTIVE: To translate and to apply MIDAS in Brazil. SETTING: Assessment of a sample of workers regularly employed by an oil refinery. SETTING: Refinaria Presidente Bernardes, Cubatão, São Paulo, Brazil. PARTICIPANTS: 404 workers of the company who correctly answered a questionnaire for the identification and evaluation of headache. When the individual considered it to be pertinent to his own needs, there was the option to answer MIDAS as well. METHODS: MIDAS, originally written in English, was translated into Brazilian Portuguese by a neurologist and by a translator specializing in medical texts. The final version of the translation was obtained when, for ten patients to whom it was applied, the text seemed clear and the results were consistent over three sessions. MAIN MEASUREMENTS: Prevalence and types of primary headaches, evaluation of MIDAS as a tool for identification of more severe cases. RESULTS: From the total of 419 questionnaires given to the employees, 404 were returned correctly completed. From these, 160 persons were identified as presenting headaches, 44 of whom considered it worthwhile answering MIDAS. Nine of these individuals who answered MIDAS were identified as severe cases of migraine due to disability caused by the condition. An interview on a later date confirmed these results. Three were cases of chronic daily headache (transformed migraine and six were cases of migraine. CONCLUSIONS: MIDAS translated to Brazilian Portuguese was a useful tool for identifying severe cases of migraine and of transformed migraine in a working environment. The workers did not consider MIDAS to be difficult to answer. Their

Efficiency Determinants in Brazilian Football Clubs

OpenAIRE

Marcelo Machado de Freitas; Rafael Araújo Sousa Farias; Leonardo Flach

2017-01-01

The aim of this study is to analyze the efficiency of Brazilian football clubs in generating revenues and the reasons behind it. To achieve this goal, we applied quantitative methods including Data Envelopment Analysis and Tobit regression modeling to data on the best clubs from 2012 to 2014, according to the Brazilian Football Confederation ranking. The results allowed for the inference that the largest Brazilian clubs, such as Grêmio (RS), Palmeiras (SP) and Vasco (RJ), were not efficie...

SBR Brazilian organophilic/clay nanocomposites

International Nuclear Information System (INIS)

Guimaraes, Thiago R.; Valenzuela-Diaz, Francisco R.; Morales, Ana Rita; Paiva, Lucilene B.

2009-01-01

The aim of this work is the obtaining of SBR composites using a Brazilian raw bentonite and the same bentonite treated with an organic salt. The clays were characterized by XRD. The clay addition in the composites was 10 pcr. The composites were characterized by XRD and had measured theirs tension strength (TS). The composite with Brazilian treated clay showed TS 233% higher than a composite with no clay, 133% higher than a composite with Cloisite 30B organophilic clay and 17% lower than a composite with Cloisite 20 A organophilic clay. XRD and TS data evidence that the composite with Brazilian treated clay is an intercalated nanocomposite. (author)

The association between low levels of lead in blood and occupational noise-induced hearing loss in steel workers

Energy Technology Data Exchange (ETDEWEB)

Hwang, Yaw-Huei [Institute of Occupational Medicine and Industrial Hygiene, College of Public Health, National Taiwan University, Taipei, Taiwan, ROC Rm. 735, 17, Xu-Zhou Rd., Taipei, Taiwan, ROC (China); Department of Public Health, College of Public Health, National Taiwan University, Taipei, Taiwan, ROC Rm. 735, 17, Xu-Zhou Rd., Taipei, Taiwan, ROC (China); Chiang, Han-Yueh [Institute of Occupational Medicine and Industrial Hygiene, College of Public Health, National Taiwan University, Taipei, Taiwan, ROC Rm. 735, 17, Xu-Zhou Rd., Taipei, Taiwan, ROC (China); Yen-Jean, Mei-Chu [Division of Family Medicine, E-Da Hospital, Taiwan, ROC 1, E-Da Rd., Jiau-Shu Tsuen, Yan-Chau Shiang, Kaohsiung County, Taiwan, ROC (China); I-Shou University, Kaohsiung County, Taiwan, ROC 1, Sec. 1, Syuecheng Rd., Da-Shu Shiang, Kaohsiung County, Taiwan, ROC (China); Wang, Jung-Der, E-mail: jdwang@ntu.edu.tw [Institute of Occupational Medicine and Industrial Hygiene, College of Public Health, National Taiwan University, Taipei, Taiwan, ROC Rm. 735, 17, Xu-Zhou Rd., Taipei, Taiwan, ROC (China); Department of Public Health, College of Public Health, National Taiwan University, Taipei, Taiwan, ROC Rm. 735, 17, Xu-Zhou Rd., Taipei, Taiwan, ROC (China); Department of Internal Medicine, National Taiwan University Hospital and National Taiwan University College of Medicine, Taipei, Taiwan, ROC No. 1, Chang-Teh St., Taipei, Taiwan, ROC (China)

2009-12-15

As the use of leaded gasoline has ceased in the last decade, background lead exposure has generally been reduced. The aim of this study was to examine the effect of low-level lead exposure on human hearing loss. This study was conducted in a steel plant and 412 workers were recruited from all over the plant. Personal information such as demographics and work history was obtained through a questionnaire. All subjects took part in an audiometric examination of hearing thresholds, for both ears, with air-conducted pure tones at frequencies of 500, 1000, 2000, 3000, 4000, 6000 and 8000 Hz. Subjects' blood samples were collected and analyzed for levels of manganese, copper, zinc, arsenic, cadmium and lead with inductive couple plasma-mass spectrometry. Meanwhile, noise levels in different working zones were determined using a sound level meter with A-weighting network. Only subjects with hearing loss difference of no more than 15 dB between both ears and had no congenital abnormalities were included in further data analysis. Lead was the only metal in blood found significantly correlated with hearing loss for most tested sound frequencies (p < 0.05 to p < 0.0001). After adjustment for age and noise level, the logistic regression model analysis indicated that elevated blood lead over 7 {mu}g/dL was significantly associated with hearing loss at the sound frequencies of 3000 through 8000 Hz with odds ratios raging from 3.06 to 6.26 (p < 0.05 {approx} p < 0.005). We concluded that elevated blood lead at level below 10 {mu}g/dL might enhance the noise-induced hearing loss. Future research needs to further explore the detailed mechanism.

The association between low levels of lead in blood and occupational noise-induced hearing loss in steel workers

International Nuclear Information System (INIS)

Hwang, Yaw-Huei; Chiang, Han-Yueh; Yen-Jean, Mei-Chu; Wang, Jung-Der

2009-01-01

As the use of leaded gasoline has ceased in the last decade, background lead exposure has generally been reduced. The aim of this study was to examine the effect of low-level lead exposure on human hearing loss. This study was conducted in a steel plant and 412 workers were recruited from all over the plant. Personal information such as demographics and work history was obtained through a questionnaire. All subjects took part in an audiometric examination of hearing thresholds, for both ears, with air-conducted pure tones at frequencies of 500, 1000, 2000, 3000, 4000, 6000 and 8000 Hz. Subjects' blood samples were collected and analyzed for levels of manganese, copper, zinc, arsenic, cadmium and lead with inductive couple plasma-mass spectrometry. Meanwhile, noise levels in different working zones were determined using a sound level meter with A-weighting network. Only subjects with hearing loss difference of no more than 15 dB between both ears and had no congenital abnormalities were included in further data analysis. Lead was the only metal in blood found significantly correlated with hearing loss for most tested sound frequencies (p < 0.05 to p < 0.0001). After adjustment for age and noise level, the logistic regression model analysis indicated that elevated blood lead over 7 μg/dL was significantly associated with hearing loss at the sound frequencies of 3000 through 8000 Hz with odds ratios raging from 3.06 to 6.26 (p < 0.05 ∼ p < 0.005). We concluded that elevated blood lead at level below 10 μg/dL might enhance the noise-induced hearing loss. Future research needs to further explore the detailed mechanism.

Extractive reserves in Brazilian Amazonia

Energy Technology Data Exchange (ETDEWEB)

Fearnside, P.M (National Institute for Research in the Amazon, Manaus-Amazonas (Brazil))

1989-06-01

In 1985 an opportunity arose for maintaining tracts of Amazonian forest under sustainable use. Brazil's National Council of Rubber Tappers and the Rural Worker's Union proposed the creation of a set of reserves of a new type, called extractive reserves. The first six are being established in one of the Brazilian states most threatened by deforestatation. The creation of extractive reserves grants legal protection to forest land traditionally used by rubber tappers, Brazil-nut gatherers, and other extractivists. The term extrativismo (extractivism) in Brazil refers to removing nontimber forest products, such as latex, resins, and nuts, without felling the trees. Approximately 30 products are collected for commercial sale. Many more types of forest materials are gathered, for example as food and medicines, for the extractivists' own use. The reserve proposal is attractive for several reasons related to social problems. It allows the rubber tappers to continue their livelihood rather than be expelled by deforestation. However, it is unlikely that sufficient land will be set aside as extractive reserves to employ all the tappers. Displaced rubber tappers already swell the ranks of urban slum dwellers in Brazil's Amazonian cities, and they have become refugees to continue their profession in the forests of neighboring countries, such as Bolivia.

Directions and deviations in the Brazilian nuclear policy

International Nuclear Information System (INIS)

Leal, M.C.

1982-01-01

The emergence of the Brazilian nuclear policy as a subject of interest to the Brazilian society, the conflicts characterizing its formulation and implementation between 1945 and 1958 and the political criteria for executing a Brazilian nuclear program are presented. (M.C.K.) [pt

A Field Study on the Respiratory Deposition of the Nano-Sized Fraction of Mild and Stainless Steel Welding Fume Metals.

Science.gov (United States)

Cena, L G; Chisholm, W P; Keane, M J; Chen, B T

2015-01-01

A field study was conducted to estimate the amount of Cr, Mn, and Ni deposited in the respiratory system of 44 welders in two facilities. Each worker wore a nanoparticle respiratory deposition (NRD) sampler during gas metal arc welding (GMAW) of mild and stainless steel and flux-cored arc welding (FCAW) of mild steel. Several welders also wore side-by-side NRD samplers and closed-face filter cassettes for total particulate samples. The NRD sampler estimates the aerosol's nano-fraction deposited in the respiratory system. Mn concentrations for both welding processes ranged 2.8-199 μg/m3; Ni concentrations ranged 10-51 μg/m3; and Cr concentrations ranged 40-105 μg/m3. Cr(VI) concentrations ranged between 0.5-1.3 μg/m3. For the FCAW process the largest concentrations were reported for welders working in pairs. As a consequence this often resulted in workers being exposed to their own welding fumes and to those generated from the welding partner. Overall no correlation was found between air velocity and exposure (R2 = 0.002). The estimated percentage of the nano-fraction of Mn deposited in a mild-steel-welder's respiratory system ranged between 10 and 56%. For stainless steel welding, the NRD samplers collected 59% of the total Mn, 90% of the total Cr, and 64% of the total Ni. These results indicate that most of the Cr and more than half of the Ni and Mn in the fumes were in the fraction smaller than 300 nm.

BRAZILIAN EXPORTS OF MANUFACTURED WOOD

Directory of Open Access Journals (Sweden)

Rafael de Azevedo Calderon

2010-08-01

Full Text Available The present work deals with the Brazilian exports of sawnwood of non-coniferous, veneer sheets and plywood, from 1961 to 2002. The data regarding the three studied products, sawnwood of non-coniferous, veneer sheets and plywood, were joined through the method of Fisher so that an econometric evaluation of the market of the three products could be carried out. Supply and demand models of the Brazilian exports were specified. The results were satisfactory and they match with the literature. The supply of exports presented a positive answer in relation to the exporter's remuneration, to the production, to the use of the installed capacity (cycles of domestic economical activity and to the tendency, and negative in relation to the internal demand. The demand for the Brazilian exports was influenced positively by the world income, participation index and tendency, and negatively for the relative price. The low elasticity-price of the found demand can have implications in the conservation of the Brazilian forest resources because the exporters can increase the prices, reduce the amounts and still increase the incomes.

Ze Cabra-Macho does it safely: building an AIDS awareness campaign among Brazil's construction workers.

Science.gov (United States)

Hughes, H

1988-09-01

Rio de Janeiro's 350,000 construction workers are considered to be at high risk of human immunodeficiency virus (HIV) infection because of their isolation and poverty. Most of these men are immigrants from agricultural areas and are separated from their wives for months at a time. Both encounters with prostitutes or homosexual relationships with other workers in the on-site dormitories are widespread practices. The Brazilian Interdisciplinary AIDS Association (ABIA) is presently working with 20 construction companies in Rio to plan AIDS educational programs and materials. Employer and employee representatives meet weekly with ABIA to consider various strategies for reaching the largely illiterate labor force. A logo of the campaign is a small, clay figure of a construction worker called Ze Cabra-Macho (brave heroic man). Audiovisuals about occupational safety are already in use on construction sites, so this medium is being selected for an educational presentation on how AIDS is and is not transmitted. Since the construction workers live together, and some are already infected with HIV, it is important to dispel panic and discrimination. an effective theme of the campaign has been that construction workers must protect themselves during sex with a condom just as they do on the work-site with safety helmets. This illustrates the importance of socially and culturally appropriate AIDS prevention messages, which are most likely achieved through the direct participation of members of the target audience.

[Transcultural adaptation of an instrument to evaluate hearing handicap in workers with noise-induced hearing loss].

Science.gov (United States)

Holanda, Wanessa Tenório Gonçalves; de Lima, Maria Luiza Carvalho; Figueiroa, José Natal

2011-01-01

The noise-induced hearing loss (NIHL) is a chronic and irreversible disease resulting of the exposure to noise in high levels at work. Even in the beginning, this hearing loss can damage in many degrees the worker's quality of life. Before this study, there wasn't an instrument, in Portuguese, to evaluate the psychosocial disadvantages of workers with NIHL. The aim of this research was to make a transcultural adaptation of an especific instrument to evaluate the hearing handicap from the original language to Portuguese, and check the reliability and legitimacy. The selected instrument passed by a process of semantic equivalence that was conducted in five stages: translation, back translation, critical appraisal of the versions, pre-test and a final review by a multi-professional group to develop a consensual version of the instrument for current use in Brazil. The instrument called "Inabilities Scale and Hearing Handicap" had, in general, acceptable psychometric measures, considering the little size of the sample and the fact that workers' hearing loss weren't too significant. Therefore, the Portuguese version of this instrument needs to be further tested in a representative sample of Brazilian workers with NIHL to ratify its utility in order to evaluate hearing handicap in this population.

Individual and work-related predictors of work outcomes related to sustainable employment among male shift and day workers.

Science.gov (United States)

van de Ven, Hardy A; Klein Hesselink, John; Bültmann, Ute; de Boer, Michiel R; de Looze, Michiel P; van der Klink, Jac J L; Brouwer, Sandra

2014-05-01

The aim of this study was to examine which individual and work-related characteristics predict work outcomes related to sustainable employment among male shift and day workers. Between 1 September 2005 and 31 December 2009, data on individual and work-related characteristics of N=5640 employees of Tata Steel in the Netherlands were retrieved from the Occupational Health Service and company registers. Work outcomes related to sustainable employment were (i) temporarily being placed in less strenuous work, (ii) sickness absence ≥6 weeks, and (iii) leaving the organization. Cox proportional hazard analyses were performed for all outcome measures. Similar predictors were found for shift and day workers although some differences were observed. For shift workers, high blood pressure and cardiovascular disease were important predictors for sickness absence. For day workers, insomnia was an important predictor of sickness absence ≥6 weeks. Similar predictors in magnitude and direction were found for work outcomes related to sustainable employment among shift and day workers. Interventions aimed at enhancing sustainable employability should focus on individual and work-related characteristics.

Establishment of quality system program for the manufacture of nuclear grade steels

International Nuclear Information System (INIS)

Saito, Toru

1978-01-01

Recently, the pressure vessels employed in the fields of nuclear power generation, petroleum refining, and chemical industry tend to be large size and high performance, therefore thick steel plates and forgings of high quality are demanded, and the establishment and maintenance of strict quality assurance system for material production are required. In Mizushima Works, Kawasaki Steel Corp., the installations for large forgings and thick plates were constructed from 1969 to 1976, and the researches on the development of production techniques were forwarded in parallel. A Quality System Certificate (Material) has been granted to Mizushima Works on March 11, 1977, by the American Society of Mechanical Engineers for the manufacture of steel plates and forgings of nuclear grade. The quality system manual as the basis of quality assurance activities, the organization for quality assurance, its responsibility and authority, the discrimination of materials, the control of manufacturing processes, the qualification of workers in charge of nondestructive test, welding, heat treatment and others, the management of tests and inspections, the management of products with faults and repairing measures, and internal supervisory system are explained. The wide use of computers is novel in the field of quality system program. (Kako, I.)

Jorge Amado and the internationalization of brazilian literature

Directory of Open Access Journals (Sweden)

Elizabeth Lowe

2013-02-01

Full Text Available http://dx.doi.org/10.5007/2175-7968.2013v1n31p119 Jorge Amado (1912-2001 is the most translated Brazilian writer and the literary figure that has shaped the reception of Brazilian literature in the world.  He is credited with opening the international literary market to the post-dictatorship generation of Brazilian writers.  Yet Amado is also a controversial figure.  The debate around him is sparked by what some believe is sexual and ethnic stereotyping in his post-1958 works and the reinforcement of "paternalistic "racial views. His reception therefore is mixed. For his English-language readers, he is a fascinating source of exotic and titillating narratives about the vast, unknown country of Brazil, and for Brazilians he is either a "great ambassador of Brazilian culture around the world" or a faux populist who disguises sexist and racist attitudes behind charming prose. This paper will address Amado's literary career, his unique contributions to Brazilian letters, the challenges of translating his work, and his influence on the production of a new Brazilian literature for export

Managing migration: the Brazilian case

OpenAIRE

Eduardo L. G. Rios-Neto

2005-01-01

The objective of this paper is to present the Brazilian migration experience and its relationship with migration management. The article is divided into three parts. First, it reviews some basic facts regarding Brazilian immigration and emigration processes. Second, it focuses on some policy and legal issues related to migration. Finally, it addresses five issues regarding migration management in Brazil.

INTERNATIONALIZATION OF BRAZILIAN FRANCHISE CHAINS: A COMPARATIVE STUDY

Directory of Open Access Journals (Sweden)

Pedro Lucas de Resende Melo

2015-04-01

Full Text Available The primary goal of this paper is to comprehend the fundamental organizational differences between Brazilian franchise chains that only operate in the home market and Brazilian franchise chains that operate internationally. The sample chosen for this study comprehends 96 Brazilian franchises operating in the home market and 67 franchises with international operations; logistic regression was used to analyze data obtained from these sources. Our findings suggest that the development of a brand in international operations can be strategic for certain Brazilian franchise chains; this seems to be, however, a scarce resource for many franchises and it could be developed through international operations. With regard to the fees charged, the outcomes demonstrate that Brazilian franchises with international operations tend to charge lower fees from its franchisees to install new units. Regarding the monitoring and control of franchises, there is evidence that the monitoring capability is one of the determining factors in the development of Brazilian franchises international operations.

Parenchymal asbestosis due to primary asbestos exposure among ship-breaking workers: report of the first cases from Bangladesh.

Science.gov (United States)

Muralidhar, Venkiteswaran; Ahasan, Md Faizul; Khan, Ahad Mahmud

2017-11-03

We report for the first time asbestosis among ship-breaking workers of Sitakunda in Bangladesh who were exposed to asbestos during ship-based and beach-based operations for at least 10 years. Asbestosis was present among 35% of workers. Years of work (>20) and forced vital capacity (<80% of predicted) were significantly associated with the disease. Currently, global ship-breaking operations are mainly concentrated in the Indian subcontinent, and Bangladesh has the majority share. Ninety per cent of domestic steel is produced in the ship-breaking operations in Bangladesh and is an important contributor to the economy. It also gives employment to more than 100 000 people. It is imperative to medically check up all the workers for benign and malignant diseases causally related to asbestos among these vulnerable population of workers. © BMJ Publishing Group Ltd (unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Metal Dust Exposure and Respiratory Health of Male Steel Work¬ers in Terengganu, Malaysia

OpenAIRE

Nurul Ainun HAMZAH; Shamsul Bahri MOHD TAMRIN; Noor Hassim ISMAIL

2015-01-01

Background: This cross sectional study was carried out to determine the relationship between metal dust exposure and respiratory health in male steel workers in Terengganu, Malaysia.Methods: Subjects were interviewed using a structured questionnaire from British Medical Research Council (BMRC) Questionnaire regarding respiratory symptoms and were examined their lung function using spirometer.Results: The mean trace metal dusts concentration TWA8 for cobalt and chromium in most of work unit ex...

Differences in ergonomic and workstation factors between computer office workers with and without reported musculoskeletal pain.

Science.gov (United States)

Rodrigues, Mirela Sant'Ana; Leite, Raquel Descie Veraldi; Lelis, Cheila Maira; Chaves, Thaís Cristina

2017-01-01

Some studies have suggested a causal relationship between computer work and the development of musculoskeletal disorders. However, studies considering the use of specific tools to assess workplace ergonomics and psychosocial factors in computer office workers with and without reported musculoskeletal pain are scarce. The aim of this study was to compare the ergonomic, physical, and psychosocial factors in computer office workers with and without reported musculoskeletal pain (MSP). Thirty-five computer office workers (aged 18-55 years) participated in the study. The following evaluations were completed: Rapid Upper Limb Assessment (RULA), Rapid Office Strain Assessment (ROSA), and Maastricht Upper Extremity Questionnaire revised Brazilian Portuguese version (MUEQ-Br revised). Student t-tests were used to make comparisons between groups. The computer office workers were divided into two groups: workers with reported MSP (WMSP, n = 17) and workers without positive report (WOMSP, n = 18). Those in the WMSP group showed significantly greater mean values in the total ROSA score (WMSP: 6.71 [CI95% :6.20-7.21] and WOMSP: 5.88 [CI95% :5.37-6.39], p = 0.01). The WMSP group also showed higher scores in the chair section of the ROSA, workstation of MUEQ-Br revised, and in the upper limb RULA score. The chair height and armrest sections from ROSA showed the higher mean values in workers WMSP compared to workers WOMSP. A positive moderate correlation was observed between ROSA and RULA total scores (R = 0.63, p ergonomics indexes for chair workstation and worse physical risk related to upper limb (RULA upper limb section) than workers without pain. However, there were no observed differences in workers with and without MSP regarding work-related psychosocial factors. The results suggest that inadequate workstation conditions, specifically the chair height, arm and back rest, are linked to improper upper limb postures and that these factors are contributing to

Dominance of foreign citations in Brazilian orthopedics journals☆☆☆

Science.gov (United States)

Teixeira, Renan Kleber Costa; Yamaki, Vitor Nagai; Rosa, Rita de Cássia Rodrigues; de Barros, Rui Sergio Monteiro; Botelho, Nara Macedo

2014-01-01

Objective To evaluate whether there is any preference for citing journals from other countries to the detriment of Brazilian journals, in three Brazilian orthopedics journals. Methods All the references of articles published in 2011 by the journals Acta Ortopédica Brasileira, Coluna/Columna and Revista Brasileira de Ortopedia were evaluated to as certain how many of these came from Brazilian journals and how many from foreign journals. Results 3813 references distributed among 187 articles were analyzed. Out of this total, 306 (8.02%) were from Brazilian journals. There was no difference between the three journals analyzed. There were 76 articles (40.64%) without any citations of articles in Brazilian journals and only two articles (1%) cited more Brazilian articles than articles published elsewhere. Conclusion There is a need for Brazilian researchers to cite articles from Brazilian journals more often. PMID:26229879

Self-reported well-being and associated factors among industrial workers in Brazil: findings from a national survey

Directory of Open Access Journals (Sweden)

Shana Ginar da Silva

Full Text Available Abstract: The purpose of this study was to estimate self-perception of well-being and associated factors among industrial workers in Brazil. A cross-sectional survey was carried out with a representative sample from 23 Brazilian states and the Federal District. Self-reported of well-being was investigated by questionnaire. Multinomial logistic regression was used in unadjusted and adjusted analyses. For 93% of the 47,477 industrial workers, the perception of well-being was positive. Those who had the highest chances of being in the category of best perception of well-being were: male workers (OR = 1.35; 95%CI: 1.28; 1.43; those aged under thirty years old (OR = 1.24; 95%CI: 1.12; 1.39; those from Southern Brazil (OR = 1.99; 95%CI: 1.83; 2.16; and people with a high income. The prevalence of positive well-being was high. Sociodemographic, behavioral and social support characteristics, as well as the characteristics related to self-report on health were associated with well-being.

Futebol mulato: racial constructs in Brazilian football

Directory of Open Access Journals (Sweden)

Tiago Fernandes Maranhao

2011-05-01

Full Text Available The aim of this paper is to review Gilberto Freyre’s ideas about futebol mulato and the way these ideas have spread the notion of the Brazilian mulatto as a symbol of a ‘racial democracy’, unique in Brazil, around the world. The notion first appeared in 1938 in an article by Freyre for the Diários Associados, an important Brazilian newspaper. Football (soccer was employed by Freyre as the special arena where the multiracial Brazilian nation could shine and show the world a different way of being, opposed to the white and ‘rational’ way of European football. In Freyre’s work, the so-called ‘football-art’ was compared to poetry, while the European style was equated with prose. This essay argues that Freyre’s ideas were useful in constructing the Brazilian identity, a nation of harmony in all its aspects, including the area of race, and how the idea of the mulatto has been used to minimise social disparities within Brazilian society. Freyre’s ideas remain contemporary; many Brazilian intellectuals still refer to these concepts. As well, the press in this huge country, and especially in World Cup years, uses the concepts of mulatto and football-art to characterize Brazil and differentiate it from other countries.

The Brazilian national system of forest permanent plots

Science.gov (United States)

Yeda Maria Malheiros de Oliveira; Maria Augusta Doetzer Rosot; Patricia Povoa de Mottos; Joberto Veloso de Freitas; Guilherme Luis Augusto Gomide; < i> et al< /i>

2009-01-01

The Brazilian National System of Forest Permanent Plots (SisPP) is a governmental initiative designed and being implemented in partnership by the Ministry of Environment (MMA), represented by the National Forest Programme (PNF) and the Brazilian Forest Service (SFB) and the Embrapa Forestry (a research center of the Brazilian Agricultural Research Corporation - Embrapa...

The Study on Weldability of Boron Steel and Hot-Stamped Steel by Using Laser Heat Source (Ⅲ) - Comparison on Laser Weldability of Boron Steel and Hot -Stamped Steel-

Energy Technology Data Exchange (ETDEWEB)

Choi, So Young; Kim, Jong Do [Korea Maritime and Ocean University, Busan (Korea, Republic of); Kim, Jong Su [Korea Institute of Machinery and Materials, Daejeon (Korea, Republic of)

2015-01-15

This study was conducted to compare the laser weldability of boron steel and hot-stamped steel. In general, boron steel is used in the hot-stamping process. Hot-stamping is a method for simultaneously forming and cooling boron steel in a press die after heating it to the austenitizing temperature. Hot-stamped steel has a strength of 1500 MPa or more. Thus, in this study, the laser weldability of boron steel and that of hot-stamped steel were investigated and compared. A continuous wave disk laser was used to produce butt and lap joints. In the butt welding, the critical cooling speed at which full penetration was obtained in the hot-stamped steel was lower than that of boron steel. In the lap welding, the joint widths were similar regardless of the welding speed when full penetration was obtained.

The Study on Weldability of Boron Steel and Hot-Stamped Steel by Using Laser Heat Source (Ⅲ) - Comparison on Laser Weldability of Boron Steel and Hot -Stamped Steel-

International Nuclear Information System (INIS)

Choi, So Young; Kim, Jong Do; Kim, Jong Su

2015-01-01

This study was conducted to compare the laser weldability of boron steel and hot-stamped steel. In general, boron steel is used in the hot-stamping process. Hot-stamping is a method for simultaneously forming and cooling boron steel in a press die after heating it to the austenitizing temperature. Hot-stamped steel has a strength of 1500 MPa or more. Thus, in this study, the laser weldability of boron steel and that of hot-stamped steel were investigated and compared. A continuous wave disk laser was used to produce butt and lap joints. In the butt welding, the critical cooling speed at which full penetration was obtained in the hot-stamped steel was lower than that of boron steel. In the lap welding, the joint widths were similar regardless of the welding speed when full penetration was obtained

Scientometrics: Nature Index and Brazilian science.

Science.gov (United States)

Silva, Valter

2016-09-01

A recent published newspaper article commented on the (lack of) quality of Brazilian science and its (in) efficiency. The newspaper article was based on a special issue of Nature and on a new resource for scientometrics called Nature Index. I show here arguments and sources of bias that, under the light of the principle in dubio pro reo, it is questionable to dispute the quality and efficiency of the Brazilian science on these grounds, as it was commented on the referred article. A brief overview of Brazilian science is provided for readers to make their own judgment.

Efficiency Determinants in Brazilian Football Clubs

Directory of Open Access Journals (Sweden)

Marcelo Machado de Freitas

2017-01-01

Full Text Available The aim of this study is to analyze the efficiency of Brazilian football clubs in generating revenues and the reasons behind it. To achieve this goal, we applied quantitative methods including Data Envelopment Analysis and Tobit regression modeling to data on the best clubs from 2012 to 2014, according to the Brazilian Football Confederation ranking. The results allowed for the inference that the largest Brazilian clubs, such as Grêmio (RS, Palmeiras (SP and Vasco (RJ, were not efficient in any period under analysis. Others, such as Guarani (SP and Guaratinguetá (SP, were efficient in all of years under consideration. With the Tobit regression model, we were able to determine that winning titles and the elite status of a given club are decisive factors in achieving efficiency. Included among the strategies that allow for greater efficiency in Brazilian clubs are the better utilization of stadiums and club assets, maximization of the financial worth of player popularity, and joining these with titles and a place in the A Series. Finally, the results of this study contribute to the strategic development of the football business, highlighting the positive effects that efficiency yields for clubs, thus supporting the growing body of research on sports management in Brazilian academia.

Testing the "Work Ability House" Model in hospital workers.

Science.gov (United States)

Martinez, Maria Carmen; Latorre, Maria do Rosário Dias de Oliveira; Fischer, Frida Marina

2016-01-01

To test the Work Ability House model, verifying the hierarchy of proposed dimensions, among a group of hospital workers. A cohort study (2009-2011) was conducted with a sample of 599 workers from a hospital in the city of São Paulo. A questionnaire including sociodemographics, lifestyle and working conditions was used. The Brazilian versions of Job Stress Scale, Effort-Reward Imbalance, Work-Related Activities That May Contribute To Job-Related Pain and/or Injury, and the Work Ability Index (WAI) were also used. A hierarchical logistic regression analysis was performed: the independent variables were allocated into levels according to the dimensions of the theoretical model in order to evaluate the factors associated with work ability. Variables associated with impairment of work ability in each dimension were as follows: (a) sociodemographics: age work injuries (p = 0.029), (c) professional competence: low educational level (p = 0.008), (d) values : intensified in overcommitment (p work: intensification of effort-reward imbalance (p = 0.009) and high demands (p = 0.040). The results confirmed the dimensions proposed for the Work Ability House model, indicating that it is valid as a representation of a multidimensional construct of multifactorial determination and can be used in the management of work ability.

Chinese Competition and Brazilian Exports of Manufactures

OpenAIRE

Jenkins, Rhys

2014-01-01

In recent years concerns have been raised over the impact of Chinese competition on Latin American exports, particularly those from Mexico. This article shows that Brazilian manufactured exports too have been negatively affected, and that this has been reflected in the “primarization” of Brazilian exports and a declining share in the import markets of its major customers. A variety of different indicators were used to analyse the extent to which Brazilian exports have faced competition from C...

Connections: Superplasticity, Damascus Steels, Laminated Steels, and Carbon Dating

Science.gov (United States)

Wadsworth, Jeffrey

2016-12-01

In this paper, a description is given of the connections that evolved from the initial development of a family of superplastic plain carbon steels that came to be known as Ultra-High Carbon Steels (UHCS). It was observed that their very high carbon contents were similar, if not identical, to those of Damascus steels. There followed a series of attempts to rediscover how the famous patterns found on Damascus steels blades were formed. At the same time, in order to improve the toughness at room temperature of the newly-developed UHCS, laminated composites were made of alternating layers of UHCS and mild steel (and subsequently other steels and other metals). This led to a study of ancient laminated composites, the motives for their manufacture, and the plausibility of some of the claims relating to the number of layers in the final blades. One apparently ancient laminated composite, recovered in 1837 from the great pyramid of Giza which was constructed in about 2750 B.C., stimulated a carbon dating study of ancient steels. The modern interest in "Bladesmithing" has connections back to many of these ancient weapons.

2. Brazilian Congress on Cell Biology and 7. Brazilian Colloquium on Electron Microscopy - Abstracts

International Nuclear Information System (INIS)

1980-01-01

Immunology, virology, bacteriology, genetics and protozoology are some of the subjects treated in the 2. Brazilian Congress on Cell Biology. Studies using radioisotopic techniques and ultrastructural cytological studies are presented. Use of optical - and electron microscopy in some of these studies is discussed. In the 7. Brazilian Colloquium on Electron Microscopy, the application of this technique to materials science is discussed (failure analysis in metallurgy, energy dispersion X-ray analysis, etc). (I.C.R.) [pt

Effective Exploration of New 760°C-Capability Steels for Coal Energy

Energy Technology Data Exchange (ETDEWEB)

Clark, Williams [The Ohio State Univ., Columbus, OH (United States); Zhao, Ji-Cheng [The Ohio State Univ., Columbus, OH (United States)

2016-09-17

Cost effective and high performance alloys that are capable of operating at 760 °C or higher for extended periods of time under a very aggressive environment are critically required for the design and development of advanced ultrasupercritical (AUSC) boilers and steam turbines. Finely dispersed Laves phase precipitates have been shown by Takeyama and co-workers to be a viable strengthening mechanism in high temperature austenitic steels. There is currently no straightforward theory that can predict what other intermetallic phases can serve as potent precipitation-strengthening phases for steels; thus we employed a highly effective dual-anneal diffusion multiple (DADM) approach to screen for viable strengthening precipitates over a wide range of compositions. From the Fe-Co-Cr-Ni-Mo DADMs, the Fe-Cr-Mo based Chi phase was identified as a new strengthening phase for high temperature ferritic steels; and from the Fe-Mn-Cr-Nb-Ni-Mo-FeAl DADMs, the Laves phase was identified as a viable strengthening precipitate in Fe-Mn and Fe-Ni based austenitic steels. After identification of viable strengthening phases from the DADMs that covered compositions in the basic ternary and quaternary systems, we employed computation thermodynamics to perform multicomponent alloy design and optimization. For the new the Chi-phase strengthened steels, we performed thermodynamic calculations to vary the volume fraction of the Chi phase and introduced Nb and carbon to promote the formation of stable carbides for grain size control during solution heat treatment. For the Fe-Ni-Mn based austenitic steels, we performed extensive parametric optimization of compositions in order to reduce the expensive Ni content, add Cr and Al for oxidation resistance, and balance the alloying contents (Ni, Mn, Cr, Al, Mo) to suppress the ferritic phase and promote the austenitic matrix phase. Four steels (two ferritic + two austenitic) were designed and tested. The two Chi-phase strengthened ferritic steels

Introduction of symbiotic human-robot-cooperation in the steel sector: an example of social innovation

Science.gov (United States)

Colla, Valentina; Schroeder, Antonius; Buzzelli, Andrea; Abbà, Dario; Faes, Andrea; Romaniello, Lea

2018-05-01

The introduction of new technologies, which can support and empower human capabilities in a number of professional tasks while possibly reducing the need for cumbersome operations and the exposure to risk and professional diseases, is nowadays perceived as a must in any industrial field, process industry included. However, despite their relevant potentials, new technologies are not always easy to introduce in the professional environment. A design procedure which takes into account the workers' acceptance, needing and capabilities as well as a continuing education and training process of the personnel who must exploit the innovation, is as fundamental as the technical reliability for the successful introduction of any new technology in a professional environment. An exemplary case is provided by symbiotic human-robot-cooperation. In the steel sector, the difficulties for the implementation of symbiotic human-robot-cooperation is bigger with respect to the manufacturing sector, due to the environmental conditions, which in some cases are not favorable to robots. On the other hand, the opportunities and potential advantages are also greater, as robots could replace human operators in repetitive, heavy tasks, by improving workers' health and safety. The present paper provides an example of the potential and opportunities of human-robot interaction and discusses how this approach can be included in a social innovation paradigm. Moreover, an example will be provided of an ongoing project funded by the Research Fund for Coal and Steel, "ROBOHARSH", which aims at implementing such approach in the steel industry, in order to develop a very sensitive task, i.e. the replacement of the refractory components of the ladle sliding gate.

Current status of stainless steel industry and development of stainless steel

International Nuclear Information System (INIS)

Lee, Yong Deuk; Lee, Chan Soo; Kim Kwang Tae

2000-01-01

Stainless steel is not only clean and smooth in its surface, but also it is superior in quality in terms of corrosion resistance and strength. So that, it is widely in use in the field of construction, chemical installations, and other industries. Growth of stainless steel industry started since the steel technology was developed for mass production in 1960s. Since then stainless steel industry grew rapidly on account of diversified development in this field and growth rate went up to 5.8% per year comparable to 2.3% of steel growth. The rapid growth is attributed to significant industry developments in Europe and Japan in the years of 1970s and 1980s. In addition to these the expansion of stainless steel industry in Korea and Taiwan. Presently Korea produces about 120,000 tons of stainless steel and occupies about 8% of international market. This means Korea become the second largest single country in world in stainless steel production. Moreover Korea is to reinforce its domestic production line by affiliating production companies, increasing of production capability, and specializing in types of stainless steel. This paper is to describe activity of material development, and types of stainless steel for industry use. (Hong, J. S.)

Smoking: what has been addressed in Brazilian journals.

Science.gov (United States)

Prado, Gustavo Faibischew; Lombardi, Elisa Maria Siqueira; Morais, Anna Miethke; Martins, Stella Regina; Santos, Ubiratan de Paula

2012-12-01

The topic of tobacco smoking, in its several aspects, has been receiving increasing attention among researchers over the past few years, which has been reflected in more data and more solid scientific literature on the subject in national journals. This article aims to review the studies that focused on smoking published between January 2010 and June 2012, in Arquivos Brasileiros de Cardiologia (Brazilian Archives of Cardiology), Brazilian Journal of Medical and Biological Research, Clinics (Sao Paulo), Jornal Brasileiro de Pneumologia (Brazilian Journal of Pulmonology), Revista da Associação Médica Brasileira (Journal of the Brazilian Medical Association) and Revista Brasileira de Cirurgia Cardiovascular (Brazilian Journal of Cardiovascular Surgery). During the aforementioned period 58 articles were published, 52 of which were original ones, addressing several aspects of smoking, such as effects on health, epidemiology, cessation and experimental studies.

3rd BRAZILIAN CONSENSUS ON Helicobacter pylori

Directory of Open Access Journals (Sweden)

Luiz Gonzaga Coelho

2013-04-01

Full Text Available Significant progress has been obtained since the Second Brazilian Consensus Conference on Helicobacter pylori Infection held in 2004, in São Paulo, SP, Brazil, and justify a third meeting to establish updated guidelines on the current management of H. pylori infection. The Third Brazilian Consensus Conference on H pylori Infection was organized by the Brazilian Nucleus for the Study of Helicobacter, a Department of the Brazilian Federation of Gastroenterology and took place on April 12-15, 2011, in Bento Gonçalves, RS, Brazil. Thirty-one delegates coming from the five Brazilian regions and one international guest, including gastroenterologists, pathologists, epidemiologists, and pediatricians undertook the meeting. The participants were allocated in one of the five main topics of the meeting: H pylori, functional dyspepsia and diagnosis; H pylori and gastric cancer; H pylori and other associated disorders; H pylori treatment and retreatment; and, epidemiology of H pylori infection in Brazil. The results of each subgroup were submitted to a final consensus voting to all participants. Relevant data were presented, and the quality of evidence, strength of recommendation, and level of consensus were graded. Seventy per cent and more votes were considered as acceptance for the final statement. This article presents the main recommendations and conclusions to guide Brazilian doctors involved in the management of H pylori infection.

Indoor air quality in Brazilian universities.

Science.gov (United States)

Jurado, Sonia R; Bankoff, Antônia D P; Sanchez, Andrea

2014-07-11

This study evaluated the indoor air quality in Brazilian universities by comparing thirty air-conditioned (AC) (n = 15) and naturally ventilated (NV) (n = 15) classrooms. The parameters of interest were indoor carbon dioxide (CO2), temperature, relative humidity (RH), wind speed, viable mold, and airborne dust levels. The NV rooms had larger concentration of mold than the AC rooms (1001.30 ± 125.16 and 367.00 ± 88.13 cfu/m3, respectively). The average indoor airborne dust concentration exceeded the Brazilian standards (indoor air quality in Brazilian university classrooms affects the health of students. Therefore, indoor air pollution needs to be considered as an important public health problem.

Trends in breastfeeding research by Brazilian nurses

Directory of Open Access Journals (Sweden)

Mônica Oliveira B. Oriá

Full Text Available Exclusive breastfeeding is acknowledged as important for survival, optimal growth, and development of infants. The current review presents a synthesis of research output by Brazilian nurses on breastfeeding over the last 20 years, analyzes the theoretical and methodological issues emerging from studies on breastfeeding in Brazil, and provides directions for future research and practice by nurses in the area breastfeeding. Studies included in this review were identified through LILACS searches of Portuguese-language sources. Articles were organized and analyzed chronologically by comparing the evolution of the Brazilian Breastfeeding Program. The incomplete research output of the Brazilian nursing profession in regard to breastfeeding research needs to be addressed. In addition, specific cultural, sociological, and anthropological characteristics of Brazilian regional settings remain to be explored. Emphasis on potential confounders and critical interrelations is warranted.

Brazilian women in politics.

Science.gov (United States)

Sanders, T G

1987-01-01

Women are gradually gaining influence in Brazilian politics, especially since recent advances in the women's movement, but they still play a limited role. There have been journals devoted to feminism and some notable feminists since 1850. In 1932 suffragettes in Brazil gained women the right to vote. Women's associations burgeoned in the 1940s and 1950s, culminating in a peak in number of women in national elected positions in 1965. A repressive military regime reversed the process, which resumed in 1975. 1975 was also significant for the Brazilian women's movement because of the U.N. Women's Year. Several large, influential feminist political action groups were formed, typically by upper class women with leftist views, although some church and union groups from lower classes also appeared. In 1979-1981, the coherence of these groups fell into schism and fragmentation, because of disagreements over the feminist political doctrines and roles, views on legality of abortion, and special interest groups such as lesbians. Another bitter dispute is opposition by leftist women to BEMFAM, the Brazilian Society of Family Welfare, which provides family planning for the poor: leftists oppose BEMFAM because it is supported by funds from "imperialist" countries such as the U.S. There are several types of feminists groups: those that emphasize health, sexuality and violence; those composed of lesbians; those originating from lower classes and unions; publicly instituted organizations. Brazilian law forbids discrimination against women holding public office, but in reality very few women actually do hold office, except for mayors of small towns and a few administrators of the Education and Social Security ministries. Political office in Brazil is gained by clientism, and since women rarely hold powerful positions in business, they are outsiders of the system. Brazilian women have achieved much, considering the low female literacy rate and traditional power system, but their

Microstructure and grain size effects on irradiation hardening of low carbon steel for reactor tanks

International Nuclear Information System (INIS)

Milasin, N.

1964-05-01

Irradiation hardening of steel for reactor pressure vessels has been studied extensively during the past few years. A great number of experimental results concerning the behaviour of these steels in the radiation field and several review papers (1,2) have been published. Most of the papers deal with the effects of specific metallurgical factors or irradiation conditions (temperature, flux) on irradiation hardening and embrittlement. In addition, a number of experiments are performed to give evidence on the mechanism of irradiation hardening of these steels. However, this mechanism is still unknown due to the complexity of steel as a system. Among different methods used in radiation damage studies, the changes of mechanical properties have been mainly investigated. By using Hall-Petch's empirical relation, σ y =σ i +k y d -1/2 between lower yield stress, σ y , and grain size, 2d, the information about the effect of irradiation on the parameters σ i and k y is obtained. Taking as a base interpretation of σ i and k y given by Petch and his co-workers it has been concluded that radiation does not change the stress to start slip but that it increase the friction that opposes the passage of free dislocations across a slip plane. In attempting to apply Hall-Petch's relation to one unirradiated ferritic steel with a carbon content higher than 0.15% some difficulties were encountered. The results obtained indicate that the influence of grain size can not be isolated from other factors introduced by the treatments used to produce different grain sizes. This paper deals with a similar problem in the case of irradiated steel. The results obtained give the changes of the mechanical properties of steel in neutron irradiation field as a function of microstructure and grain size. In addition, the mechanical properties of irradiated steel are measured after annealing at 150 deg C and 450 deg C. On the basis of the experimental results obtained the relative microstructure and

Global power and Brazilian nuclear decisions

Energy Technology Data Exchange (ETDEWEB)

Metri, Paulo, E-mail: pmetri@terra.com.br [Clube de Engenharia, Rio de Janeiro, RJ (Brazil)

2017-07-01

Brazilian society declares no intention to development a nuclear artifact. This is on its Constitution. The submarine of nuclear propulsion may be used as a weapon of defense and, therefore, has a peaceful objective. Nationalism must be applied only to benefit the society. Nationalist attention has always been devoted, at various occasions, to the Brazilian nuclear sector. However, since Brazilian society has many needs and the Brazilian government always had numerous energy options, this sector has not been developed as it could be. Other successful applications of nuclear technology, besides electric generation, are not considered here. At present, the country is experiencing a moment of harassment of liberal forces. It is difficult to know if the population understands what is going on, due to the traditional media control. This media belongs to the capital. The rise and the fall of the nationalist strand in a country follow a global tendency and also depend of actions of the international capital. In nationalist periods, more decisions with positive social impact are taken. Therefore, sovereignty is necessary to increase the benefits to society. Unfortunately, the Brazilians deceived by the companies of mass communication and corrupt political leaderships allow the country to be dominated. Even the armed forces had their projects paralyzed. The nuclear sector, as all other, suffers with the low budget and the future is difficult to predict. (author)

Global power and Brazilian nuclear decisions

International Nuclear Information System (INIS)

Metri, Paulo

2017-01-01

Brazilian society declares no intention to development a nuclear artifact. This is on its Constitution. The submarine of nuclear propulsion may be used as a weapon of defense and, therefore, has a peaceful objective. Nationalism must be applied only to benefit the society. Nationalist attention has always been devoted, at various occasions, to the Brazilian nuclear sector. However, since Brazilian society has many needs and the Brazilian government always had numerous energy options, this sector has not been developed as it could be. Other successful applications of nuclear technology, besides electric generation, are not considered here. At present, the country is experiencing a moment of harassment of liberal forces. It is difficult to know if the population understands what is going on, due to the traditional media control. This media belongs to the capital. The rise and the fall of the nationalist strand in a country follow a global tendency and also depend of actions of the international capital. In nationalist periods, more decisions with positive social impact are taken. Therefore, sovereignty is necessary to increase the benefits to society. Unfortunately, the Brazilians deceived by the companies of mass communication and corrupt political leaderships allow the country to be dominated. Even the armed forces had their projects paralyzed. The nuclear sector, as all other, suffers with the low budget and the future is difficult to predict. (author)

The problematic on the cancer development in occupationally exposed workers to ionizing radiations

International Nuclear Information System (INIS)

Nouailhetas, Y.; Mezrahi, A.; Heilbron Filho, P.F.L.; Oliveira, S.M.V.

1996-01-01

Frequently and in an increasing perspective, the Brazilian Nuclear Energy Commission is inquired on the development of cancer in occupationally exposed workers to ionizing radiation. These workers try to compensate their state of ill health juridically. Taking into account that cancer is a probabilistic effect of radiation, it could be only detected by an increase in cases that normally occur in a particular population. Whether or not the occurrence of the illness is identified as having occupational origin misses scientific consistence. Regarding the probabilistic effect of low level radiation doses, radiation protection is founded on the linear dose-effect without threshold hypothesis. Thus, it could be call into a question: is it possible that the illness, presented by an individual, derives from occupational causes. If the answer is positive, the responsibility can be imputed, at first, to the employer and the link of causality turns out to be fundamented not any more in measurable objective facts but in social, economic, ethic and moral aspects, which arise from the radiological protection quality and measures offered by the employer. (author)

The nuclear importation and exportation - The Brazilian situation

International Nuclear Information System (INIS)

Coimbra, G.L.

1985-01-01

The panorama of Brazilian economy emphasizing the measurements adopted by Brazilian government referring to importation and exportation policy is presented. The Brazilian Nuclear Program knows the nuclear trade gives good economic perspective. In the context of importation and exportation policy the laws concerned to nuclear trade transactions, taxes, national organizations responsible by the external trade policy and their attributions are presented. (M.C.K.) [pt

Compactibility of atomized high-speed steel and steel 3 powders

International Nuclear Information System (INIS)

Kulak, L.D.; Gavrilenko, A.P.; Pikozh, A.P.; Kuz'menko, N.N.

1985-01-01

Spherical powders and powders of lammellar-scaly shape of high-speed R6M5K5 steel and steel 3 produced by the method of centrifugal atomization of a rotating billet under conditions of cold pressing in steel moulds are studied for thier compactability. Compacting pressure dependnences are establsihed for density of cold-pressed compacts of spherical and scaly powders. The powders of lammellar-scaly shape both of high-speed steel and steel 3 are found to possess better compactibility within a wide range of pressures as compared to powders of spherical shape. Compacts of the lammellar-scaly powders possess also higher mechanical strength

BRAZILIAN NEWS PORTALS CHARACTERISTICS

Directory of Open Access Journals (Sweden)

Heloiza G. Herckovitz

2011-02-01

Full Text Available A content analysis of four Brazilian news media portals found that economic news dominated the top headlines with little attention paid to education, the environment and welfare. Other trends included a focus on local events and national news sources, reliance on few sources, mostly official ones, and a low percentage of news that fitted the concept of newsworthiness (a combination of both social significance and deviance concepts. Other findings of a study of 432 top news stories published by UOL, Estadão, iG and Terra during a 15-day period between February and March 2008 indicate that the top portions of the portals’ front pages carry news that lacks story depth, editorial branding, and multimedia applications. The results suggest that online news portals are in their infancy although Brazil has the largest online population of Latin America. This study hopes to shed light on the gatekeeping process in Brazilian news portals. Brazilian media portals have yet to become a significant editorial force able to provide knowledge about social issues and public affairs in a socially responsible fashione.

Bond characteristics of steel fiber and deformed reinforcing steel bar embedded in steel fiber reinforced self-compacting concrete (SFRSCC)

Science.gov (United States)

Aslani, Farhad; Nejadi, Shami

2012-09-01

Steel fiber reinforced self-compacting concrete (SFRSCC) is a relatively new composite material which congregates the benefits of the self-compacting concrete (SCC) technology with the profits derived from the fiber addition to a brittle cementitious matrix. Steel fibers improve many of the properties of SCC elements including tensile strength, ductility, toughness, energy absorption capacity, fracture toughness and cracking. Although the available research regarding the influence of steel fibers on the properties of SFRSCC is limited, this paper investigates the bond characteristics between steel fiber and SCC firstly. Based on the available experimental results, the current analytical steel fiber pullout model (Dubey 1999) is modified by considering the different SCC properties and different fiber types (smooth, hooked) and inclination. In order to take into account the effect of fiber inclination in the pullout model, apparent shear strengths ( τ ( app)) and slip coefficient ( β) are incorporated to express the variation of pullout peak load and the augmentation of peak slip as the inclined angle increases. These variables are expressed as functions of the inclined angle ( ϕ). Furthurmore, steel-concrete composite floors, reinforced concrete floors supported by columns or walls and floors on an elastic foundations belong to the category of structural elements in which the conventional steel reinforcement can be partially replaced by the use of steel fibers. When discussing deformation capacity of structural elements or civil engineering structures manufactured using SFRSCC, one must be able to describe thoroughly both the behavior of the concrete matrix reinforced with steel fibers and the interaction between this composite matrix and discrete steel reinforcement of the conventional type. However, even though the knowledge on bond behavior is essential for evaluating the overall behavior of structural components containing reinforcement and steel fibers

Corrosion resistant steel

International Nuclear Information System (INIS)

Zubchenko, A.S.; Borisov, V.P.; Latyshev, V.B.

1980-01-01

Corrosion resistant steel for production of sheets and tubes containing C, Mn, Cr, Si, Fe is suggested. It is alloyed with vanadium and cerium for improving tensile properties and ductility. The steel can be melted by a conventional method in electric-arc or induction furnaces. The mentioned steel is intended to be used as a substitute for nickel-bearing austenitic steels

Brazilian Studies and Brazilianists: Conceptual remarks

Directory of Open Access Journals (Sweden)

Vinicius Mariano de Carvalho

2017-01-01

Full Text Available This article discusses the concept of Brazilian Studies. It does not intend to outline a defence for a new discipline, or to propose paradigms for that elusive field called ‘area studies’. It will, bring some reflections on epistemological and methodological issues realted to what it is been called Brazilian Studies.

Electrodeposited Reduced Graphene Oxide Films on Stainless Steel, Copper, and Aluminum for Corrosion Protection Enhancement

OpenAIRE

Abdulkareem Mohammed Ali Al-Sammarraie; Mazin Hasan Raheema

2017-01-01

The enhancement of corrosion protection of metals and alloys by coating with simple, low cost, and highly adhered layer is still a main goal of many workers. In this research graphite flakes converted into graphene oxide using modified Hammers method and then reduced graphene oxide was electrodeposited on stainless steel 316, copper, and aluminum for corrosion protection application in seawater at four temperatures, namely, 20, 30, 40, and 50°C. All corrosion measurements, kinetics, and therm...

The new Brazilian national forest inventory

Science.gov (United States)

Joberto V. de Freitas; Yeda M. M. de Oliveira; Doadi A. Brena; Guilherme L.A. Gomide; Jose Arimatea Silva; < i> et al< /i>

2009-01-01

The new Brazilian national forest inventory (NFI) is being planned to be carried out through five components: (1) general coordination, led by the Brazilian Forest Service; (2) vegetation mapping, which will serve as the basis for sample plot location; (3) field data collection; (4) landscape data collection of 10 x 10-km sample plots, based on high-resolution...

Citizenship and decoloniality in Brazilian education

Directory of Open Access Journals (Sweden)

Viviane Conceição Antunes

2014-08-01

Full Text Available Reflecting on the importance of multiculturalism in teaching process and observing the otherness are primarily a challenge. This enables us to rethink what we have within ourselves, also to reconstitute memories involving discriminatory and unethical attitudes, which takes place in social fellowship. Based on the studies of Walsh (2007, 2009, Gomes (2007 and Tavares (2011, this work relies on decoloniality studies, mainly on the relevance of the history of Africa and Africanness in Brazilian education. Our corpus of analysis is found in the "Diretrizes Curriculares Nacionais para a Educação Básica" (DCN, 2013, the Brazilian Legislative Syllabus for Basic Education. Our focus is on the chapters concerning the Native-Brazilian and Quilomboa Education and ethnic-racial relations. Our most important aims are: to show the intercultural theoretical framework in which they are based on; to understand the immediate link established between the Native-Brazilian education and intercultural perspective; to clarify how the African diaspora was carried out in this particular case. Based on some Excel resources we were able to: 1 stablish the predominance of functional framework of interculturalism throughout these chapters, along with some critical features of interculturalism, as the issue of curricular decoloniality; 2 observe the established relationship between bilingualism and multiculturalism in the guidelines of Native-Brazilian education; and 3 identify a search for an effective inclusion of Africanness in curricula supported by the historical recognition and visibility of their sociocultural contribution.

References from Brazilian medical journals in national publications.

Science.gov (United States)

Teixeira, Renan Kleber Costa; Botelho, Nara Macedo; Petroianu, Andy

2013-01-01

To assess whether there is a preference for international journal citation to the detriment of national ones in ten Brazilian medical journals, in two different periods. All references in the articles published in Arquivos Brasileiros de Oftalmologia, Revista Brasileira de Cirurgia Cardiovascular, Revista da Associação Médica Brasileira, São Paulo Medical Journal, Arquivos Brasileiros de Endocrinologia e Metabologia, Clinics, Jornal Brasileiro de Pneumologia, Revista da Sociedade Brasileira de Medicina Tropical, Revista Brasileira de Psiquiatria e Acta Ortopédica Brasileira in the years 2011 and 2007 were analyzed, assessing the number of articles published in national and international journals. A total of 36,125 references from 1,462 articles published in the 10 aforementioned journals were analyzed. Of the total number, 4.242 (11.74%) were from Brazilian journals. There was no significant difference between the two analyzed periods. A total of 453 (30,98%) of the articles studied non-cited brazilian papers,and 81 (5.54%) articles had more Brazilian than international references. Of total references analyzed, 11.74% were related to articles published in Brazilian journals. This number, when compared to the percentage of Brazilian articles published in the medical area, demonstrates a good number of citations of national articles. Copyright © 2012 Elsevier Editora Ltda. All rights reserved.

Moderating effect of gross family income on the association between demographic indicators and active commuting to work in Brazilian adults.

Science.gov (United States)

da Silva, Jaqueline Aragoni; da Silva, Kelly Samara; Del Duca, Giovani Firpo; Dos Santos, Priscila Cristina; Wolker, Sofia; de Oliveira, Elusa Santina Antunes; de Barros, Mauro Virgílio Gomes; Nahas, Markus Vinicius

2016-06-01

To investigate the moderating effect of gross family income on the association between demographic indicators and active commuting to work in Brazilian adults. Secondary analysis of the survey "Lifestyle and leisure habits of industry workers" (n=46,981), conducted in 24 Brazilian states (2006-2008). Self-reported information was collected with a previously tested questionnaire. Crude and adjusted logistic regression models were applied to analyze the association between sociodemographic variables (sex, age, marital status, number of children, education, country area and company size) and active commuting to work in different strata of gross family income. To test the moderating effect, an interaction analysis was applied. The proportion of active commuters among low-, medium- and high-income workers was 40.7% (95%CI:40.0%;41.5%), 27.0% (95%CI:26.3;27.6%) and 11.1%, (95%CI:10.5%;11.7%), respectively. The moderating effect of gross family income was confirmed. Men were more likely (OR:1.22 95%CI:1.12;1.32) to commute actively than women among low-income individuals. Active commuting was less likely among older workers in low-(OR30-39:0.90 95%CI: 0.83;0.98; OR≥40: 0.76 95%CI: 0.68;0.85) and medium-income strata (OR30-39:0.87 95%CI:0.80;0.95; OR≥40:0.84 95%CI:0.76;0.93) and among married individuals in high-income strata (OR:0.72 95%IC:0.61;0.84). Adults with lower education (ORhigh:10.80 95%CI:8.47;13.77), working in the south (ORhigh:1.93 95%CI:1.53;2.44) and in small companies (ORlow:2.50 95%CI:2.28;2.74) were more likely to commute actively; however, the magnitude of these associations differed at each income strata. There was an inverse association between gross family income and active commuting. Gross family income acts as a moderator of the association between demographic indicators and active commuting. Copyright © 2016 Elsevier Inc. All rights reserved.

The Role of Agriculture on the Recent Brazilian Economic Growth

OpenAIRE

Spolador, Humberto Francisco Silva; Roe, Terry L.

2012-01-01

This paper investigates the contribution of the Brazilian agriculture to economic growth of the Brazilian economy. It draws upon the Global Trade Analysis Project (GTAP) data base, and other time series data to construct a multi-sector Ramsey model that shows the transition growth of the Brazilian agricultural sector and its effects on growth of the Brazilian economy, with particular emphasis given to the years 1994–2010.

Study of brazilian market of advanvced ceramics

International Nuclear Information System (INIS)

Veiga, M.M.; Soares, P.S.M.; SIlva, A.P. da; Alvarinho, S.B.

1989-01-01

The brazilian actual market survey of advanced ceramics, divided in sectors according to their function is described. The electroelectronics, magnetics, optics, mechanics and nuclears ceramics are presented. A forecasting of the brazilian market in advanced ceramics are also mentioned. (C.G.C.) [pt

On-site monitoring of plutonium workers

International Nuclear Information System (INIS)

Burns, P.A.; Richardson, C.K.; Paulka, S.

1996-01-01

Full text: As part of the Maralinga rehabilitation program it is necessary to implement a system of on-site monitoring for the workers in order to ensure that they do not exceed recommended dose limits. The main problem in the rehabilitation work is the inhalation of dusts which contain micron sized plutonium particles. Using the new ICRP lung model and available data derived from measurements on contaminated soils, the intake for a dose of 20 mSv was calculated to be 1200 Bq. Four methods are available for direct measurements on workers; nasal swabs, faecal analysis, urine analysis and lung monitoring. The first two techniques are sensitive but will give varying results depending of the time interval between exposure and sampling. They are also difficult to implement on a routine basis. For the second two techniques, the activity in the lungs and the activity excreted per day in the urine remain relatively constant for several years following an intake, making more accurate dose estimates possible. The ICRP lung model predicts deposition in the lung of the order of 5% of intake and urinary excretion models predict approximately 10 -5 of this will be excreted daily in the urine. Lung monitoring of workers will be performed routinely at Maralinga in a partly enclosed room constructed from 10cm of steel, using two 50 mm diameter germanium detectors shielded with lead collimators. The detectors will measure 241 Am, which has grown in following the decay of 241 Pu, and the minimum detectable activity will be 15 - 20 Bq depending on the chest thickness and chest wall thickness of the individual being measured. Urine will be collected routinely and selected samples will be measured. The minimum detectable activity will be 2001μBq of 239 Pu in a daily urine sample

The steel scrap age.

Science.gov (United States)

Pauliuk, Stefan; Milford, Rachel L; Müller, Daniel B; Allwood, Julian M

2013-04-02

Steel production accounts for 25% of industrial carbon emissions. Long-term forecasts of steel demand and scrap supply are needed to develop strategies for how the steel industry could respond to industrialization and urbanization in the developing world while simultaneously reducing its environmental impact, and in particular, its carbon footprint. We developed a dynamic stock model to estimate future final demand for steel and the available scrap for 10 world regions. Based on evidence from developed countries, we assumed that per capita in-use stocks will saturate eventually. We determined the response of the entire steel cycle to stock saturation, in particular the future split between primary and secondary steel production. During the 21st century, steel demand may peak in the developed world, China, the Middle East, Latin America, and India. As China completes its industrialization, global primary steel production may peak between 2020 and 2030 and decline thereafter. We developed a capacity model to show how extensive trade of finished steel could prolong the lifetime of the Chinese steelmaking assets. Secondary steel production will more than double by 2050, and it may surpass primary production between 2050 and 2060: the late 21st century can become the steel scrap age.

Preparation and characterization of 304 stainless steel/Q235 carbon steel composite material

Directory of Open Access Journals (Sweden)

Wenning Shen

Full Text Available The composite material of 304 stainless steel reinforced Q235 carbon steel has been prepared by modified hot-rolling process. The resulted material was characterized by scanning electron microscope, three-electrode method, fault current impact method, electrochemical potentiodynamic polarization curve measurement and electrochemical impedance spectroscopy. The results showed that metallurgical bond between the stainless steel layer and carbon steel substrate has been formed. The composite material exhibited good electrical conductivity and thermal stability. The average grounding resistance of the composite material was about 13/20 of dip galvanized steel. There has no surface crack and bubbling formed after fault current impact. The composite material led to a significant decrease in the corrosion current density in soil solution, compared with that of hot dip galvanized steel and bare carbon steel. On the basis polarization curve and EIS analyses, it can be concluded that the composite material showed improved anti-corrosion property than hot-dip galvanized steel. Keywords: Stainless steel, Carbon steel, Anti-corrosion, Conductivity, Electrochemical, EIS

Domestic coalitions in the FTAA negotiations: the Brazilian case

Directory of Open Access Journals (Sweden)

Daniel Castelan

2016-01-01

Full Text Available Abstract This paper proposes an explanation to the domestic coalitions organised in Brazil around the FTAA negotiations, which stand as a hard case for the existing theories on political cleavages: industrialists and trade unions, albeit having shared common interests in the negotiations, did not adopt a joint strategy to foster their positions. The hypothesis to explain the political alignments in the FTAA is that the opening of the Brazilian market, which had advanced a lot in the years of negotiations, altered the priorities of workers and employers, as well as their preferences in foreign trade policy, hindering the reconciliation of class interests. Both agreed that the U.S. proposal for the FTAA was undesirable, but they completely disagreed on other issues that emerged in the political agenda during the reforms period, such as the role of the State in an open economy, the scope of labour and social rights and the social security system, the structure of taxation, etc. Some of the controversial issues were not new, but the international trade liberalisation intensified the dispute over them.

The Brazilian sugarcane innovation system

International Nuclear Information System (INIS)

Tosi Furtado, Andre; Gaya Scandiffio, Mirna Ivonne; Barbosa Cortez, Luis Augusto

2011-01-01

Ethanol has recently been of great interest worldwide because it is a viable economic alternative to petroleum products and it is a renewable source of energy that mitigates the emission of greenhouse gases. Brazilian bioethanol from sugarcane is the most successful case at the world level because of its low cost and low level of greenhouse gas emissions. Brazil's success with sugarcane cannot be understood as based solely on a natural comparative advantage, but as a result of efforts that culminated in a positive trajectory of technological learning, relying mostly on incremental innovations. The purpose of this article is to analyze the key aspects of the innovation system built around the Brazilian sugarcane industry. It is based on the national innovation systems approach according to which innovation results from the interaction of different institutional actors. Institutional arrangements are analyzed as the basis for the innovative process, in particular R and D and the innovation policies and strategies of the main players in the sugarcane sector, including sugar and ethanol mills, industrial goods suppliers, public and private research institutions, and governmental agencies. - Research Highlights: → The Brazilian success in bioethanol is due to the sugarcane innovation system. → Private funds for R and D became central after IAA closure. → Nowadays Brazilian innovation system is transforming to keep its leadership. → Public funds for research in the second generation bioethanol.

Factor associated with self-reported work-related musculoskeletal disorders in Brazilian adults

Directory of Open Access Journals (Sweden)

Ada Ávila Assunção

Full Text Available ABSTRACT OBJECTIVE To describe the prevalence of work-related musculoskeletal disorder (WMSD and analyze the factors associated with this outcome in the Brazilian population. METHODS In this cross-sectional, population-based study, we use data from the National Survey on Health (PNS of 2013. The sample was composed of 60,202 Brazilians aged 18 years or older. The outcome variable was the occurrence of self-reported WMSD. Sociodemographic and occupational characteristics, personal resources, and health conditions were investigated as explanatory variables. Analyses were performed with the software Stata 12.0 and considered the weighting imposed by the sampling design of the study. Then, univariate and multivariate binary logistic models were carried out, considering a significance level of 5%. RESULTS The results obtained indicated that the prevalence of WMSD in the Brazilian population was of 2.5%, ranging from 0.2% (Acre to 4.2% (Santa Catarina. The factors associated with a greater chance of occurrence of WMSD were: female sex (OR = 2.33; 95%CI 1.72–3.15; be temporarily away from work (OR = 2.44; 95%CI 1.41–4.23; be exposed to noise at the workplace (OR = 2.16; 95%CI 1.68–2.77; seniority equal to or greater than 4.5 years at the current job (OR = 1.37; 95%CI 1.09–1.72; participate in volunteer work (OR = 1.65; 95%CI 1.25–2.17; report medical diagnosis of arthritis or rheumatism (OR = 2.40; 95%CI 1.68–3.44; and depression (OR = 2.48; 95%CI 1.86–3.31. On the other hand, factors associated with less chance of WMSD were: not having a partner (OR = 0.73; 95%CI 0.37–0.71 and working in an open environment (OR = 0.51; 95%CI 0.37–0.71. CONCLUSIONS The associated factors and the prevalence found indicate regional and gender differences. Special attention to comorbidities and environmental noise monitoring would benefit the health of workers in the Country.

LAMI - a planned Brazilian facility to investigate the mechanical and physical properties of structural materials under irradiation

International Nuclear Information System (INIS)

Andrade, Arnaldo H.P.; Lobo, Raquel M.

2011-01-01

The LAMI (Laboratorio de Materiais Irradiados) is a hot laboratory designed to the characterization of irradiated structural material and will constitute one of the main installations of the Brazilian Multipurpose Reactor (RMB). The strong points of LAMI are: to contribute, through theoretical and experimental investigations, to the development of knowledge in materials science in order to be able to predict the evolution of the physical and mechanical material properties under service conditions (irradiation, thermomechanical solicitation, influence of the environment, etc); to characterize the properties of the materials used in the nuclear industry in order to determine their performance and to be able to predict their life expectancy; to establish, maintain and make use of the database generated by these data and to provide expertise on industrial components, in particular to investigate strain or rupture mechanisms. The test materials can be irradiated or not, and originate from surveillance programs, experimental neutron irradiations or simulated irradiation with charged particles. The main line of LAMI will have 10 shielded hot cells. The building also will have an area dedicated to micro and nano structural materials analysis. The mechanical characterization to be carried out within LAMI includes mechanical tests on irradiated materials, comprehension of behavior and damage processes and the incorporation of the test data results in a data bank for capitalization of test results. Planned materials to be tested are going to be metallic alloys used in industrial and experimental reactor: pressure vessel steels, internal stainless steels, austeno-ferritic steels, zirconium alloys and aluminum alloys. (author)

Assessment of the Economic Structure of Brazilian Agribusiness

Science.gov (United States)

Rodrigues Moreira, Vilmar; Kureski, Ricardo; Pereira da Veiga, Claudimar

2016-01-01

This paper presents an economic assessment of Brazilian agribusiness and its relationship with other economic sectors. It was found that, in 2011, agribusiness had a share of 18.45% (basic prices) and 19.77% (market prices) of Brazilian GDP. The tax burden of agribusiness (20.68%) was higher than that of other sectors (13.59%), despite agribusiness being a major contributor to the generation of foreign exchange, employment, and essential products, such as food. Brazilian agribusiness is a major employer, responsible for 29.39% of national employment. However, its average income is lower than in the other sectors of the Brazilian economy. Finally, agribusiness was found to be the biggest generator of foreign exchange, with a positive balance of trade. It was possible to conclude that agribusiness forms a strong link between agriculture and livestock, industry, and services in other economic sectors. For this reason, it can be said that the development of agribusiness is highly relevant to the process of Brazilian economic development and is therefore important to the progress of economic policies. PMID:27243040

Assessment of the Economic Structure of Brazilian Agribusiness.

Science.gov (United States)

Rodrigues Moreira, Vilmar; Kureski, Ricardo; Pereira da Veiga, Claudimar

2016-01-01

This paper presents an economic assessment of Brazilian agribusiness and its relationship with other economic sectors. It was found that, in 2011, agribusiness had a share of 18.45% (basic prices) and 19.77% (market prices) of Brazilian GDP. The tax burden of agribusiness (20.68%) was higher than that of other sectors (13.59%), despite agribusiness being a major contributor to the generation of foreign exchange, employment, and essential products, such as food. Brazilian agribusiness is a major employer, responsible for 29.39% of national employment. However, its average income is lower than in the other sectors of the Brazilian economy. Finally, agribusiness was found to be the biggest generator of foreign exchange, with a positive balance of trade. It was possible to conclude that agribusiness forms a strong link between agriculture and livestock, industry, and services in other economic sectors. For this reason, it can be said that the development of agribusiness is highly relevant to the process of Brazilian economic development and is therefore important to the progress of economic policies.

Assessment of the Economic Structure of Brazilian Agribusiness

Directory of Open Access Journals (Sweden)

Vilmar Rodrigues Moreira

2016-01-01

Full Text Available This paper presents an economic assessment of Brazilian agribusiness and its relationship with other economic sectors. It was found that, in 2011, agribusiness had a share of 18.45% (basic prices and 19.77% (market prices of Brazilian GDP. The tax burden of agribusiness (20.68% was higher than that of other sectors (13.59%, despite agribusiness being a major contributor to the generation of foreign exchange, employment, and essential products, such as food. Brazilian agribusiness is a major employer, responsible for 29.39% of national employment. However, its average income is lower than in the other sectors of the Brazilian economy. Finally, agribusiness was found to be the biggest generator of foreign exchange, with a positive balance of trade. It was possible to conclude that agribusiness forms a strong link between agriculture and livestock, industry, and services in other economic sectors. For this reason, it can be said that the development of agribusiness is highly relevant to the process of Brazilian economic development and is therefore important to the progress of economic policies.

[Health and indigenous peoples in Brazil: the challenge of professional training and continuing education of workers in intercultural contexts].

Science.gov (United States)

Diehl, Eliana Elisabeth; Pellegrini, Marcos Antonio

2014-04-01

This article discusses training and continuing medical education for indigenous health workers and health professionals in indigenous health under the guidelines of the Brazilian National Healthcare Policy for Indigenous Peoples, which is currently behind schedule and incomplete as part of the official government agenda. Based on inter-sector proposals for health training by the Ministries of Health and Education, the article highlights the case of indigenous healthcare, emphasizing that government initiatives in this area still need to incorporate the concept of continuing education, a powerful tool for fostering intercultural dialogue and orienting health practices.

The Brazilian Multipurpose Reactor (RMB) Project

Energy Technology Data Exchange (ETDEWEB)

Perrotta, Jose Augusto [Comissao Nacional de Energia Nuclear (CNEN), Rio de Janeiro, RJ (Brazil)

2012-07-01

Full text: The Plan of Action on Science, Technology and Innovation (PACT 2007-2010) of the Ministry of Science Technology and Innovation (MCTI), aligned to the governmental strategies for the Brazilian Nuclear Program, established as a goal the study and definition of the Brazilian Multipurpose Reactor (RMB). The RMB research reactor is designed to perform three main functions: radioisotope production for medicine, industry, agriculture and environmental applications; fuel and material irradiation testing in support to the Brazilian nuclear energy program; and to provide neutron beams for scientific and applied research. The main project facilities are: nuclear pool type reactor with a flux level compatible to the multipurpose uses; hot cells laboratory for Mo-99 and I-131 processing; hot cells laboratory for radioisotope processing; hot cells laboratory for irradiated material post irradiation analysis; neutron beams laboratory building with scientific equipment and instrumentation for researching; radiochemistry laboratory; radioactive waste treatment facility; support laboratories for operation and researching; and buildings for researchers and operators. This speech presents the RMB project status, giving some technical and management details on its development and its future perspectives for new jobs in research activities for the Brazilian technical and scientific community. (author)

The Brazilian Multipurpose Reactor (RMB) Project

International Nuclear Information System (INIS)

Perrotta, Jose Augusto

2012-01-01

Full text: The Plan of Action on Science, Technology and Innovation (PACT 2007-2010) of the Ministry of Science Technology and Innovation (MCTI), aligned to the governmental strategies for the Brazilian Nuclear Program, established as a goal the study and definition of the Brazilian Multipurpose Reactor (RMB). The RMB research reactor is designed to perform three main functions: radioisotope production for medicine, industry, agriculture and environmental applications; fuel and material irradiation testing in support to the Brazilian nuclear energy program; and to provide neutron beams for scientific and applied research. The main project facilities are: nuclear pool type reactor with a flux level compatible to the multipurpose uses; hot cells laboratory for Mo-99 and I-131 processing; hot cells laboratory for radioisotope processing; hot cells laboratory for irradiated material post irradiation analysis; neutron beams laboratory building with scientific equipment and instrumentation for researching; radiochemistry laboratory; radioactive waste treatment facility; support laboratories for operation and researching; and buildings for researchers and operators. This speech presents the RMB project status, giving some technical and management details on its development and its future perspectives for new jobs in research activities for the Brazilian technical and scientific community. (author)

Sports injuries in Brazilian blind footballers.

Science.gov (United States)

Magno e Silva, M P; Morato, M P; Bilzon, J L J; Duarte, E

2013-03-01

The purpose of this study was to assess the characteristics and prevalence of sports-related injuries in visually disabled athletes of the Brazilian football 5-a-side team. The participants were 13 male athletes, all classified as B1 visual class, members of the Brazilian team, who played in five consecutive international competitions. Data were collected using the Brazilian Paralympic Committee and the Brazilian Confederation of Sports for the Blind report form. From the total of 13 athletes, 11 succumbed to some form of injury during the 5 competitions, which incorporated 23 matches, representing a prevalence of 84.6%. A total of 35 sports injuries were recorded, giving a clinical incidence of 2.7 injuries per athlete and an injury risk of 0.85 and an incidence rate of 0.12 injuries per match. Traumatic injuries (80%) were more common than overuse injuries (20%) (psports-related injuries in 5-a-side football in blind athletes. The results are important in guiding strategies to inform the implementation of preventive pathways and provide a strong rationale for the compulsory use of additional protective equipment. © Georg Thieme Verlag KG Stuttgart · New York.

The Brazilian business and growth cycles

Directory of Open Access Journals (Sweden)

Chauvet Marcelle

2002-01-01

Full Text Available This paper uses several produceres to date and analyse the Brazilian business and growth cycles. In particular, a Markov switching model is fitted to quarterly and annual real production data. The smoothed probabilities of the Markov states are used as predictive rules to define different phases of cyclical fluctuations of real Brazilian production. The results are compared with different non-parametric rules. All methods implemented yield similar dating and reveal asymmetries across the different states of the Brazilian business and growth cycles, in which slowdowns and recessions are short and abrupt, while high growth phases and expansions are longer and less steep. The resulting dating of the Brazilian economic cycles can be used as a reference point for construction and evaluation of the predictive performance of coincident, leading, or lagging indicators of economic activity. In addition, the filtered probabilities obtained from the Markov switching model allow early recognition of the transition to a new business cycle phase, wich can be used, for example, for evaluation of the adequate strength and timing of countercyclical policies, for reassessment of projected sales or profits by businesses and investors, or for monitoring of inflation pressures.

Personal exposures to airborne metals in London taxi drivers and office workers in 1995 and 1996

Energy Technology Data Exchange (ETDEWEB)

Pfeifer, G.D.; Lynam, D.R. [Air Conservation Department, Ethyl Corporation, 330 South Fourth Street, Richmond, VA (United States); Harrison, R.M. [The University of Birmingham, Environmental Health, School of Chemistry, Edgbaston, Birmingham (United Kingdom)

1999-09-01

In 1995, a petroleum marketer introduced a diesel fuel additive in the UK containing Mn as MMT (methylcyclopentadienyl manganese tricarbonyl). A small study of personal exposures to airborne Mn in London was conducted before and after introduction of the additive to identify any major impact of the additive on exposures. In 1995, personal exposures to Mn were measured in two groups, taxi drivers and office workers (10 subjects per group) for two consecutive 7-day periods. A similar study was carried out in 1996 to determine if exposures had changed. Samples were also analyzed for Ca, Al, Mg and Pb. In 1996, exposures to aerosol mass as total suspended particulates (TSP) and PM{sub 2.5} were measured in addition to the metals. Manganese exposures in this cohort did not increase as a result of introduction of the additive. However, a significant source of Mn exposure was discovered during the conduct of these tests. The mean exposure to Mn was higher among the office workers in both years than that of the taxi drivers. This was due to the fact that approximately half the office workers commuted via the underground railway system where airborne dust and metal concentrations are significantly elevated over those in the general environment. Similar results have been noted in other cities having underground rail systems. Exposure to Mn, Pb, Ca, and Mg were not significantly different between the 2 years. Taxi drivers had higher exposures than office workers to Mg and Pb in both years. Commuting via the underground also had a significant impact on exposures to TSP, PM{sub 2.5}, Al, and Ca, but had little effect on exposures to Mg. The aerosol in the underground was particularly enriched in Mn, approximately 10-fold, when compared to the aerosol in the general environment. There are several possible sources for this Mn, including mechanical wear of the steel wheels on the steel rails, vaporization of metal from sparking of the third rail, or brake wear.

Is there publication bias towards brazilian articles on cancer?

Science.gov (United States)

Loureiro, Luiz Victor Maia; Callegaro, Donato; Rocha, Altieres de Arruda; Prado, Bernard Lobato; Mutão, Taciana Sousa; Donnarumma, Carlos del Cistia; del Giglio, Auro

2013-01-01

ABSTRACT Objective: To investigate whether Brazilian articles on cancer are published in journals with an impact factor and/or repercussion (measured by the number of citations) inferior to those that come from foreign organizations. Methods: A search was carried out in PubMed for the MeSH term “neoplasm” with the limits clinical trial, affiliation of the Brazilian author(s), and interval from July 1st, 2009 to June 30, 2010. Selected for matching were non-Brazilian related articles published from three months prior to three months after the date of publication of the Brazilian study. The numbers of citations were obtained from two databases, as well as the impact factor for the journals in which the articles were published. Results: Fortythree national and 876 related international articles were identified. The Brazilian publications had a mean impact factor of 3.000 versus 3.430 of the international ones (p=0.041). There was no statistically significant difference as to the number of citations between the two groups. The affiliation of the first author with a Brazilian or foreign organization did not significantly influence the number of citations or the impact factor. Conclusion: Brazilian articles are significantly less accepted in journals with higher impact factors, although it does not compromise its repercussion on the scientific community. PMID:23579739

Plasma nitriding of steels

CERN Document Server

Aghajani, Hossein

2017-01-01

This book focuses on the effect of plasma nitriding on the properties of steels. Parameters of different grades of steels are considered, such as structural and constructional steels, stainless steels and tools steels. The reader will find within the text an introduction to nitriding treatment, the basis of plasma and its roll in nitriding. The authors also address the advantages and disadvantages of plasma nitriding in comparison with other nitriding methods. .

RMB. The new Brazilian multipurpose research reactor

International Nuclear Information System (INIS)

Perrotta, Jose Augusto; Soares, Adalberto Jose

2015-01-01

Brazil has four research reactors (RR) in operation: IEA-R1, a 5 MW pool type RR; IPR-R1, a 100 kW TRIGA type RR; ARGONAUTA, a 500 W Argonaut type RR, and IPEN/MB-01, a 100 W critical facility. The first three were constructed in the 50's and 60's, for teaching, training, and nuclear research, and for many years they were the basic infrastructure for the Brazilian nuclear developing program. The last, IPEN/MB-01, is the result of a national project developed specifically for qualification of reactor physics codes. Considering the relative low power of Brazilian research reactors, with exception of IEAR1, none of the other reactors are feasible for radioisotope production, and even IEA-R1 has a limited capacity. As a consequence, since long ago, 100% of the Mo-99 needed to attend Brazilian nuclear medicine services has been imported. Because of the high dependence on external supply, the international Moly-99 supply crisis that occurred in 2008/2009 affected significantly Brazilian nuclear medicine services, and as presented in previous IAEA events, in 2010 Brazilian government formalized the decision to build a new research reactor. The new reactor named RMB (Brazilian Multipurpose Reactor) will be a 30 MW open pool type reactor, using low enriched uranium fuel. The facility will be part of a new nuclear research centre, to be built about 100 kilometres from Sao Paulo city, in the southern part of Brazil. The new nuclear research centre will have several facilities, to use thermal and cold neutron beams; to produce radioisotopes; to perform neutron activation analysis; and to perform irradiations tests of materials and fuels of interest for the Brazilian nuclear program. An additional facility will be used to store, for at least 100 years, all the fuel used in the reactor. The paper describes the main characteristics of the new centre, emphasising the research reactor and giving a brief description of the laboratories that will be constructed, It also presents the

RMB. The new Brazilian multipurpose research reactor

Energy Technology Data Exchange (ETDEWEB)

Perrotta, Jose Augusto; Soares, Adalberto Jose [Comissao Nacional de Energia Nuclear (CNEN) (Brazil)

2015-01-15

Brazil has four research reactors (RR) in operation: IEA-R1, a 5 MW pool type RR; IPR-R1, a 100 kW TRIGA type RR; ARGONAUTA, a 500 W Argonaut type RR, and IPEN/MB-01, a 100 W critical facility. The first three were constructed in the 50's and 60's, for teaching, training, and nuclear research, and for many years they were the basic infrastructure for the Brazilian nuclear developing program. The last, IPEN/MB-01, is the result of a national project developed specifically for qualification of reactor physics codes. Considering the relative low power of Brazilian research reactors, with exception of IEAR1, none of the other reactors are feasible for radioisotope production, and even IEA-R1 has a limited capacity. As a consequence, since long ago, 100% of the Mo-99 needed to attend Brazilian nuclear medicine services has been imported. Because of the high dependence on external supply, the international Moly-99 supply crisis that occurred in 2008/2009 affected significantly Brazilian nuclear medicine services, and as presented in previous IAEA events, in 2010 Brazilian government formalized the decision to build a new research reactor. The new reactor named RMB (Brazilian Multipurpose Reactor) will be a 30 MW open pool type reactor, using low enriched uranium fuel. The facility will be part of a new nuclear research centre, to be built about 100 kilometres from Sao Paulo city, in the southern part of Brazil. The new nuclear research centre will have several facilities, to use thermal and cold neutron beams; to produce radioisotopes; to perform neutron activation analysis; and to perform irradiations tests of materials and fuels of interest for the Brazilian nuclear program. An additional facility will be used to store, for at least 100 years, all the fuel used in the reactor. The paper describes the main characteristics of the new centre, emphasising the research reactor and giving a brief description of the laboratories that will be constructed, It also

Implementation of the Brazilian national repository

International Nuclear Information System (INIS)

Tello, Cledola Cassia Oliveira de

2013-01-01

Ionizing radiation in Brazil is used in electricity generation, medicine, industry, agriculture and for research and development purposes. All these activities can generate radioactive waste. At this point, in Brazil, the use of nuclear energy and radioisotopes justifies the construction of a national repository for radioactive wastes of low and intermediate-level. According to Federal Law No. 10308, Brazilian National Commission for Nuclear Energy (CNEN) is responsible for designing and constructing the intermediate and final storages for radioactive wastes. Additionally, a restriction on the construction of Angra 3 is that the repository is under construction until its operation start, attaining some requirements of the Brazilian Environmental Regulator (IBAMA). The RBMN Project (Repository for Low and Intermediate-Level Radioactive Wastes) aims at the implantation of a National Repository for disposal of low and intermediate-level of radiation wastes. This Project has some aspects that are unique in the Brazilian context, especially referring to the time between its construction and the end of its institutional period. This time is about 360 years, when the area will be released for unrestricted uses. It means that the Repository must be safe and secure for more than three hundred years, which is longer than half of the whole of Brazilian history. This aspect is very new for the Brazilian people, bringing a new dimension to public acceptance. Another point is this will be the first repository in South America, bringing a real challenge for the continent. The current status of the Project is summarized. (author)

Steel

International Nuclear Information System (INIS)

Zorev, N.N.; Astafiev, A.A.; Loboda, A.S.; Savukov, V.P.; Runov, A.E.; Belov, V.A.; Sobolev, J.V.; Sobolev, V.V.; Pavlov, N.M.; Paton, B.E.

1977-01-01

Steels also containing Al, N and arsenic, are suitable for the construction of large components for high-power nuclear reactors due to their good mechanical properties such as good through-hardening, sufficiently low brittleness conversion temperature and slight displacement of the latter with neutron irradiation. Defined steels and their properties are described. (IHOE) [de

Hygienic behaviour in Brazilian stingless bees

Science.gov (United States)

Alves, Denise A.; Bento, José M. S.; Marchini, Luis C.; Ratnieks, Francis L. W.

2016-01-01

ABSTRACT Social insects have many defence mechanisms against pests and pathogens. One of these is hygienic behaviour, which has been studied in detail in the honey bee, Apis mellifera. Hygienic honey bee workers remove dead and diseased larvae and pupae from sealed brood cells, thereby reducing disease transfer within the colony. Stingless bees, Meliponini, also rear broods in sealed cells. We investigated hygienic behaviour in three species of Brazilian stingless bees (Melipona scutellaris, Scaptotrigona depilis, Tetragonisca angustula) in response to freeze-killed brood. All three species had high mean levels of freeze-killed brood removal after 48 h ∼99% in M. scutellaris, 80% in S. depilis and 62% in T. angustula (N=8 colonies per species; three trials per colony). These levels are greater than in unselected honey bee populations, ∼46%. In S. depilis there was also considerable intercolony variation, ranging from 27% to 100% removal after 2 days. Interestingly, in the S. depilis colony with the slowest removal of freeze-killed brood, 15% of the adult bees emerging from their cells had shrivelled wings indicating a disease or disorder, which is as yet unidentified. Although the gross symptoms resembled the effects of deformed wing virus in the honey bee, this virus was not detected in the samples. When brood comb from the diseased colony was introduced to the other S. depilis colonies, there was a significant negative correlation between freeze-killed brood removal and the emergence of deformed worker bees (P=0.001), and a positive correlation with the cleaning out of brood cells (P=0.0008). This shows that the more hygienic colonies were detecting and removing unhealthy brood prior to adult emergence. Our results indicate that hygienic behaviour may play an important role in colony health in stingless bees. The low levels of disease normally seen in stingless bees may be because they have effective mechanisms of disease management, not because they lack

Hygienic behaviour in Brazilian stingless bees

Directory of Open Access Journals (Sweden)

Hasan Al Toufailia

2016-11-01

Full Text Available Social insects have many defence mechanisms against pests and pathogens. One of these is hygienic behaviour, which has been studied in detail in the honey bee, Apis mellifera. Hygienic honey bee workers remove dead and diseased larvae and pupae from sealed brood cells, thereby reducing disease transfer within the colony. Stingless bees, Meliponini, also rear broods in sealed cells. We investigated hygienic behaviour in three species of Brazilian stingless bees (Melipona scutellaris, Scaptotrigona depilis, Tetragonisca angustula in response to freeze-killed brood. All three species had high mean levels of freeze-killed brood removal after 48 h ∼99% in M. scutellaris, 80% in S. depilis and 62% in T. angustula (N=8 colonies per species; three trials per colony. These levels are greater than in unselected honey bee populations, ∼46%. In S. depilis there was also considerable intercolony variation, ranging from 27% to 100% removal after 2 days. Interestingly, in the S. depilis colony with the slowest removal of freeze-killed brood, 15% of the adult bees emerging from their cells had shrivelled wings indicating a disease or disorder, which is as yet unidentified. Although the gross symptoms resembled the effects of deformed wing virus in the honey bee, this virus was not detected in the samples. When brood comb from the diseased colony was introduced to the other S. depilis colonies, there was a significant negative correlation between freeze-killed brood removal and the emergence of deformed worker bees (P=0.001, and a positive correlation with the cleaning out of brood cells (P=0.0008. This shows that the more hygienic colonies were detecting and removing unhealthy brood prior to adult emergence. Our results indicate that hygienic behaviour may play an important role in colony health in stingless bees. The low levels of disease normally seen in stingless bees may be because they have effective mechanisms of disease management, not because

Natural radionuclides in Brazilian underground mines

International Nuclear Information System (INIS)

Santos, Talita de Oliveira

2015-01-01

Rock, soil and water contain "2"3"8U and "2"3"2Th and their decay products. The distribution of these radionuclides differs in terms of activity concentration depending on the mineral type and origin. All ore processing releases long and short half-life radionuclides, mainly radon and its progeny. It is important to monitor this gas and its decay products in underground mines in order to assess the radiological hazards of the exposed workers. On this concern, the present work outlines the characterization of brazilian underground mines with relation to natural radionuclides, specially radon and its progeny. The radon concentration was measured by using E-PERM Electrets Ion Chamber (Radelec), AlphaGUARD (Saphymo GmbH) and CR-39 (Landauer) track etch detectors. The radon progeny was determined by using DOSEman detector. The equilibrium state between radon and its progeny was calculated. Based on these data, the total effective dose for miners was estimated. Moreover, the contribution from the main sources to the radon level inside mines was evaluated. For this, the following detectors were used: measurements of radon concentrations in soil gas were carried out by using AlphaGUARD detector; "2"2"6Ra ("2"1"4Bi), "2"3"2Th e "4"0K specific activity in ore and soil samples were determined by using gamma-ray spectrometry HPGe detector (Canberra); and radon concentration in groundwater samples was performed by using RAD7 (Durridge Inc.). The radon concentration ranged from 113 to 8171 Bq.m"-"3 and the Equilibrium Equivalent Concentration varied from 76 to 1174 Bq.m"-"3. The equilibrium factor mean value was 0.4 (0.2 -0.7). The workers estimated total effective dose ranged from 1 to 22 mSv.a"-"1 (mean 10 mSv.a"-"1). Therefore, results show the importance to assess continually and permanently the radon and its progeny behavior and the need to adopt safety measurements against natural radiation in underground mines environment. (author)

Evaluation of the susceptibility to corrosion by pites of supermartensitic stainless steel with different superficial finishing; Avaliacao da susceptibilidade a corrosao por pites do aco inoxidavel supermartensitico com diferentes acabamentos superficiais

Energy Technology Data Exchange (ETDEWEB)

Freitas, Mario Jose Bueno de Souza

2015-07-01

The objective of this study is to evaluate the susceptibility by pitting corrosion in a supermartensitic stainless steel (13%Cr) with different surface finishes, in an environment that simulates the conditions found in the range of the Brazilian marine subsoil before the dense layer of salt - the so-called pre-salt. In this study were conducted electrochemical tests of potentiodynamic anodic polarization and electrochemical impedance spectroscopy (EIS) in environment containing 35, 50 and 190 g/L of NaCl and dissolved oxygen concentrations <10, 100 and 500ppb. Were also used the techniques of Moessbauer spectroscopy and EDS (Energy Dispersive Spectrometry) coupled to a scanning electron microscope (SEM) for microstructural characterization of 13%Cr steel. It was observed by the electrochemical tests, the increase in the concentration of chloride ions in solution makes the studied steel more susceptible to localized corrosion. It was also observed that the material showed less susceptibility to pitting corrosion when its surface was less rough. (author)

Tool steels

DEFF Research Database (Denmark)

Højerslev, C.

2001-01-01

On designing a tool steel, its composition and heat treatment parameters are chosen to provide a hardened and tempered martensitic matrix in which carbides are evenly distributed. In this condition the matrix has an optimum combination of hardness andtoughness, the primary carbides provide...... resistance against abrasive wear and secondary carbides (if any) increase the resistance against plastic deformation. Tool steels are alloyed with carbide forming elements (Typically: vanadium, tungsten, molybdenumand chromium) furthermore some steel types contains cobalt. Addition of alloying elements...... serves primarily two purpose (i) to improve the hardenabillity and (ii) to provide harder and thermally more stable carbides than cementite. Assuming proper heattreatment, the properties of a tool steel depends on the which alloying elements are added and their respective concentrations....

The Brazilian Back Complaints in the Elders (Brazilian BACE) study: characteristics of Brazilian older adults with a new episode of low back pain.

Science.gov (United States)

Jesus-Moraleida, Fabianna Resende De; Ferreira, Paulo Henrique; Ferreira, Manuela Loureiro; Silva, Juscelio Pereira Da; Assis, Marcella Guimarães; Pereira, Leani Souza Máximo

Low back pain (LBP) is little explored in the aging population especially when considering age-relevant and culturally dependent outcomes. We aimed to describe socio-demographic and clinical characteristics of Brazilian older people with a new episode of LBP presenting to primary care. We sourced baseline information on socio-demographic, pain-related and clinical characteristics from 602 older adults from the Brazilian Back Complaints in the Elders (Brazilian BACE) study. We analyzed differences in pain, disability, functional capacity and psychosocial factors between sub-groups based on age (i.e. participants aged 55-74 or ≥75 years), education (i.e. those with four years or less of schooling or those with more than four years of schooling) and income (i.e. participants who reported earning two or less minimal wages or three and more). Participants presented severe LBP (7.18/10, SD: 2.59). Younger participants were slightly more disabled (mean difference 1.29 points, 95% confidence interval [CI]: 0.03/5.56), reporting poorer physical health, and less fall-related self-efficacy (mean difference of 2.41, 95% CI 0.35/4.46). Those less educated, and those with income equal or less than two minimum wages had more disability, pain catastrophizing and worse functional capacity. This was the first study showing that Brazilian older adults with LBP present high levels of functional disability and psychological distress, especially those with low socioeconomic status. Copyright © 2017 Associação Brasileira de Pesquisa e Pós-Graduação em Fisioterapia. Publicado por Elsevier Editora Ltda. All rights reserved.

Brazilian energy statistics - 1988. Annual bulletin of the Brazilian National Committee of the World Energy Conference

International Nuclear Information System (INIS)

1988-01-01

This bulletin deals with the primary sources that carry most weight in the Brazilian energy balance: hydraulic energy, petroleum, natural gas and coal. It contains data on ethyl alcohol derived from sugar cane and some information about the Brazilian Action Plan for the petroleum sector, nuclear energy, ecology and Chernobyl. Graphs, annual statistics and long range data of electric power, petroleum and derivates, natural gas, coal and alcohol are also included. 19 figs., 15 tabs

Substitution of modified 9 Cr-1 Mo steel for austentic stainless steels

International Nuclear Information System (INIS)

Sikka, V.K.

1982-04-01

This report describes the current program to develop a high-strength ferritic-martensitic steel. The alloy is essentially Fe-9% Cr-1% Mo with small additions of V and Nb and is known as modifed 9 Cr-1 Mo steel. Its elevated-temperature properties and design allowable stresses match those of type 304 stainless steel for temperatures up to 600 0 C and exceed those of other ferritic steels by factors of 2 to 3. The improved strength of this alloy permits its use in place of stainless steels for many applications

Weldability of Stainless Steels

International Nuclear Information System (INIS)

Saida, Kazuyoshi

2010-01-01

It gives an outline of metallographic properties of welding zone of stainless steels, generation and mechanisms of welding crack and decreasing of corrosion resistance of welding zone. It consists of seven chapters such as introduction, some kinds of stainless steels and properties, metallographic properties of welding zone, weld crack, toughness of welding zone, corrosion resistance and summary. The solidification modes of stainless steels, each solidification mode on the cross section of Fe-Cr-Ni alloy phase diagram, each solidification mode of weld stainless steels metal by electron beam welding, segregation state of alloy elements at each solidification mode, Schaeffler diagram, Delong diagram, effects of (P + S) mass content in % and Cr/Ni equivalent on solidification cracking of weld stainless steels metal, solidification crack susceptibility of weld high purity stainless steels metal, effects of trace impurity elements on solidification crack susceptibility of weld high purity stainless steels metal, ductile fracture susceptibility of weld austenitic stainless steels metal, effects of H2 and ferrite content on generation of crack of weld 25Cr-5N duplex stainless steels, effects of O and N content on toughness of weld SUS 447J1 metals, effect of ferrite content on aging toughness of weld austenitic stainless steel metal, corrosion morphology of welding zone of stainless steels, generation mechanism of knife line attack phenomenon, and corrosion potential of some kinds of metals in seawater at room temperature are illustrated. (S.Y.)

Brazilian energy balance 2006: calendar year 2005

International Nuclear Information System (INIS)

2006-01-01

This report shows the energy flows of different primary and secondary sources, from the production to the final consumption in all the sectors of the Brazilian economy, for the calendar year 2006. It is divided into nine chapters: energy analysis and aggregated data; energy supply and consumption by source 1990/2005; energy consumption by sector 1990/2005; energy import and export 1990/2005; transformation center balances 1990/2005; Brazilian energy resources and reserves 1974/2005; energy and socio-economic 1990/2005; federal states data and appendices including installed capacity; world energy data; general structure of the Brazilian Energy Balance; treatment of information; conversion units and consolidated Energy Balance 1970-2005

Cesium accumulation in native trees from the Brazilian Cerrado

International Nuclear Information System (INIS)

Franca, E.J.D.; Miranda, M.V.F.E.S.; Santos, T.O.; Cantinha, R.S.; Fernandes, E.A.D.N.

2016-01-01

Even considered not essential for plants, cesium may cycle within forest ecosystems. Taking into account the lack of knowledge on the distribution of this chemical element in Brazilian ecosystems, this work encompasses the unexpected cesium accumulation in native plant leaves from Cerradao, a Brazilian hotspot of world biodiversity. Some trees were Cs accumulators, achieving mass fractions in leaves 700 times higher (up to 12.7 mg kg -1 ) when compared to other Brazilian native tree leaves from the Atlantic Forest. In fact, such trace element accumulation in leaves was not previously noticed for Brazilian ecosystems despite the intra- and inter-species variability observed in Cerrado tree leaves. (author)

Breast cancer screening: updated recommendations of the Brazilian College of Radiology and Diagnostic Imaging, Brazilian Breast Disease Society, and Brazilian Federation of Gynecological and Obstetrical Associations

Directory of Open Access Journals (Sweden)

Linei Augusta Brolini Dellê Urban

Full Text Available Abstract Objective: To present the current recommendations for breast cancer screening in Brazil, as devised by the Brazilian College of Radiology and Diagnostic Imaging, the Brazilian Breast Disease Society, and the Brazilian Federation of Gynecological and Obstetrical Associations. Materials and methods: We analyzed scientific studies available in the Medline and Lilacs databases. In the absence of evidence, the recommendations reflected the consensus of a panel of experts. Recommendations: Annual mammography screening is recommended for women 40-74 years of age. Among women ≥ 75 years of age, annual mammography screening should be reserved for those with an expected survival > 7 years. Complementary ultrasound should be considered for women with dense breasts. Complementary magnetic resonance imaging is recommended for women at high risk. When available, an advanced form of mammography known as tomosynthesis can be considered as a means of screening for breast cancer.

Preparation and characterization of 304 stainless steel/Q235 carbon steel composite material

Science.gov (United States)

Shen, Wenning; Feng, Lajun; Feng, Hui; Cao, Ying; Liu, Lei; Cao, Mo; Ge, Yanfeng

The composite material of 304 stainless steel reinforced Q235 carbon steel has been prepared by modified hot-rolling process. The resulted material was characterized by scanning electron microscope, three-electrode method, fault current impact method, electrochemical potentiodynamic polarization curve measurement and electrochemical impedance spectroscopy. The results showed that metallurgical bond between the stainless steel layer and carbon steel substrate has been formed. The composite material exhibited good electrical conductivity and thermal stability. The average grounding resistance of the composite material was about 13/20 of dip galvanized steel. There has no surface crack and bubbling formed after fault current impact. The composite material led to a significant decrease in the corrosion current density in soil solution, compared with that of hot dip galvanized steel and bare carbon steel. On the basis polarization curve and EIS analyses, it can be concluded that the composite material showed improved anti-corrosion property than hot-dip galvanized steel.

Microstructure and grain size effects on irradiation hardening of low carbon steel for reactor tanks

Energy Technology Data Exchange (ETDEWEB)

Milasin, N [Institute of Nuclear Sciences Boris Kidric, Vinca, Beograd (Serbia and Montenegro)

1964-05-15

Irradiation hardening of steel for reactor pressure vessels has been studied extensively during the past few years. A great number of experimental results concerning the behaviour of these steels in the radiation field and several review papers (1,2) have been published. Most of the papers deal with the effects of specific metallurgical factors or irradiation conditions (temperature, flux) on irradiation hardening and embrittlement. In addition, a number of experiments are performed to give evidence on the mechanism of irradiation hardening of these steels. However, this mechanism is still unknown due to the complexity of steel as a system. Among different methods used in radiation damage studies, the changes of mechanical properties have been mainly investigated. By using Hall-Petch's empirical relation, {sigma}{sub y}={sigma}{sub i}+k{sub y} d{sup -1/2} between lower yield stress, {sigma}{sub y}, and grain size, 2d, the information about the effect of irradiation on the parameters {sigma}{sub i} and k{sub y} is obtained. Taking as a base interpretation of {sigma}{sub i} and k{sub y} given by Petch and his co-workers it has been concluded that radiation does not change the stress to start slip but that it increase the friction that opposes the passage of free dislocations across a slip plane. In attempting to apply Hall-Petch's relation to one unirradiated ferritic steel with a carbon content higher than 0.15% some difficulties were encountered. The results obtained indicate that the influence of grain size can not be isolated from other factors introduced by the treatments used to produce different grain sizes. This paper deals with a similar problem in the case of irradiated steel. The results obtained give the changes of the mechanical properties of steel in neutron irradiation field as a function of microstructure and grain size. In addition, the mechanical properties of irradiated steel are measured after annealing at 150 deg C and 450 deg C. On the basis of

Compresibility and sinterability of HCx PM steel diluted with stainless steels

Directory of Open Access Journals (Sweden)

Elena Gordo

2003-12-01

Full Text Available HCx powder metallurgy steel contains in its composition high contents of Cr and C, and significant quantities of alloy elements typical of tool steels (Mo, V, W, to provide the corrosion resistance of stainless steel with wear resistance of tool steels. HCx appears to be a suitable material for applications in aggressive environments, as valve seat inserts in automotive engines. However, this steel presents a low compressibility leading to high production costs. In this work, some results carried out to improve the compressibility of HCx are presented. The way to attempt this improvement is the dilution of base material with two stainless steels, the ferritic 430LHC and the austenitic 316L. The powder mixes prepared were uniaxially pressed to study the compressibility. The sinterability was study by determining of density, hardness, transverse rupture strength (TRS and microstructural evolution after vacuum sintering at different temperatures. As a result, better compressibility is observed in the mixes although not all of them present the properties required.

Whole-body counting installation for assessment of internal contamination in workers

International Nuclear Information System (INIS)

Oliveira, C.A.N.; Cunha, P.G.; Lipsztein, J.L.; Bertelli, L.N.; Fonseca, A.M.G.; Ramalho, A.T.

1985-01-01

A whole-body counting installation for assessment of internal contamination in workers has recently been added to the Bioassay Division of the Instituto de Radioprotecao e Dosimetria, Comissao Nacional de Energia Nuclear (IRD/CNEN). For the last two years the laboratory has been monitoring personnel involved in uranium mining and milling activities, monazite industry workers and nuclear medicine staff dealing with iodine-131 and technetium-99. Uptakes of radionuclides by the different organs and also dose equivalents are evaluated through the use of mathematical models. The IRD whole-body counter unit was specially designed to detect a variety of internally deposited radionuclides which emit photons in the energy range of 15 keV to 3 MeV. It consists of a monitoring room (2.5x2.5x2.5 m internal dimension), with 0.15 m thick steel walls, internally lined with 0.3 cm lead, 0.15 cm cadmium and 0.05 cm thick copper sheets. The facility is equipped with three different size NaI(T1) detectors and three 12.7 cm diameter phoswich detectors. (author)

Type A and type behaviors and factors related to job satisfaction among male white-collar workers.

Science.gov (United States)

Hagihara, A; Tarumi, K; Morimoto, K

1998-01-01

Numerous studies have examined the health effects of Type A behavior and job satisfaction/dissatisfaction, but we know very little about the relationship between aspects of the work environment related to job satisfaction and the Type A behavior pattern. In the present study, we analyzed data concerning work Stressors, private aspects of life, and job satisfaction among male white-collar workers (n=657) in a large steel company, and identified the respective aspects of the work environment related to job satisfaction among groups divided by Type A/B behavior patterns.We found that the nature of predictors for job satisfaction varied with the behavior type. "Being not busy at work" (pjob satisfaction among the Type A workers while "working less than 10 hours per day" (pjob satisfaction among the Type workers. "Work performance is evaluated" was a significant predictor of job satisfaction among all three behavior types (A, B, and A/B).Our results can provide information useful for the creation of programs to lower the level of job dissatisfaction and mental stress depending upon the behavior type of employees.

Boron Steel: An Alternative for Costlier Nickel and Molybdenum Alloyed Steel for Transmission Gears

Directory of Open Access Journals (Sweden)

A. Verma

2010-06-01

Full Text Available Case Carburized (CC low carbon steels containing Ni, Cr and Mo alloying elements are widely used for transmission gears in automobile, as it possesses desired mechanical properties. In order to cut cost and save scarce materials like Ni and Mo for strategic applications, steel alloyed with Boron has been developed, which gives properties comparable to Ni-Cr-Mo alloyed steel. In the process of steel development, care was taken to ensure precipitation of boron which results in precipitation hardening. The characterization of the developed boron steel had exhibited properties comparable to Ni-Cr-Mo alloyed steel and superior to conventional boron steel.

Transcultural Diabetes Nutrition Algorithm: Brazilian Application

Directory of Open Access Journals (Sweden)

Fabio Moura

2015-09-01

Full Text Available The prevalence of obesity, pre-diabetes, and type 2 diabetes (T2D is increasing worldwide, especially in the developing nations of South America. Brazil has experienced an exponential increase in the prevalence of these chronic non-communicable diseases. The rising prevalence is probably due to changing eating patterns, sedentary living, and a progressive aging of the population. These trends and their underlying causes carry untoward consequences for all Brazilians and the future of Brazilian public health and the healthcare system. Lifestyle changes that include healthy eating (nutrition therapy and regular physical activity (structured exercise represent efficient inexpensive measures to prevent and/or treat the aforementioned disorders and are recommended for all afflicted patients. Regrettably, the implementation of lifestyle changes is fraught with clinical and personal challenges in real life. The transcultural Diabetes Nutrition Algorithm (tDNA is a therapeutic tool intended to foster implementation of lifestyle recommendations and to improve disease-related outcomes in common clinical settings. It is evidence-based and amenable to cultural adaptation. The Brazilian Diabetes Association, Society of Cardiology and Ministry of Health guidelines for nutrition therapy and physical exercise were considered for the Brazilian adaptation. The resultant tDNA-Brazil and its underlying recommendations are presented and explained.

Earning management in Brazilian financial institutions

Directory of Open Access Journals (Sweden)

Adriana Bruscato Bortoluzzo

2016-06-01

Full Text Available ABSTRACT The present study aims to study earnings management in a significant sample of 123 banks in the Brazilian market between 2001 and 2012. Given the important role that banks play in a country's economy, it is important to understand that there are discretionary factors involved in the reporting of a financial institution's profitability. Credit provisioning guidelines for Brazilian financial institutions are described in Resolution 2682/99 of the National Monetary Council (Conselho Monetário Nacional. Because of the discretion allowed in this resolution, loan loss provision is used as instrument of earnings management, which is not an illegal practice, but this behavior does affect the risk perception of agents and analysts, and they should be aware of it and understand it. We found that credit provisioning is used as an earnings management mechanism to smooth the net income of Brazilian financial institutions. Brazilian banks tend to avoid not only negative net income pre-loan loss provisions and taxes, but also negative net income pre-loan loss provisions and taxes in relation to the previous period. Contrary to the previous studies, it is not clear if banks avoid lower net income pre-loan loss provisions and taxes than a given peer group.

Brazilian minerals annual report

International Nuclear Information System (INIS)

1977-01-01

Statistics of Brazilian mineral resources and production in 1977 are presented. Data included refer also to economic aspects, market, taxes, government incentives, manpower, exportation, importation, etc [pt

Factors associated with sleep duration in Brazilian high school students.

Science.gov (United States)

Gomes Felden, Érico Pereira; Barbosa, Diego Grasel; Junior, Geraldo Jose Ferrari; Santos, Manoella De Oliveira; Pelegrini, Andreia; Silva, Diego Augusto Santos

2017-01-01

The aim of this study was to investigate the factors associated with short sleep duration on southern Brazilian high school students. Our study was comprised of 1,132 adolescents aged 14 to 19 years, enrolled in public high schools in São José, Brazil. The students answered a questionnaire about working (work and workload), health perception, smoking, school schedule, sleep (duration and daytime sleepiness), and socio-demographics data. The results showed that more than two thirds of adolescent workers had short sleep duration (76.7%), and those with a higher workload (more than 20 hours) had a shorter sleep duration (7.07 hours) compared to non-workers (7.83 hours). In the analysis of factors associated with short sleep duration, adolescents who worked (OR = 2.12, 95% CI 1.53 to 2.95) were more likely to have short sleep duration compared to those who did not work. In addition, older adolescents (17-19 years) and students with poor sleep quality were 40% and 55% more likely to have short sleep duration compared to younger adolescents (14-16 years) and students with good sleep quality, respectively. Adolescents with daytime sleepiness were more likely to have short sleep duration (OR = 1.49, 95% CI 1.06 to 2.07) compared to those without excessive daytime sleepiness. In addition students of the morning shift (OR = 6.02, 95% CI 4.23 to 8.57) and evening shift (OR = 2.16, 95% CI 1.45 to 3.22) were more likely to have short sleep duration compared to adolescents of the afternoon shift. Thereby adolescents who are workers, older, attended morning and evening classes and have excessive daytime sleepiness showed risk factors for short sleep duration. In this sense, it is pointed out the importance of raising awareness of these risk factors for short sleep duration of students from public schools from São José, located in southern Brazil.

Shortened version of the work ability index to identify workers at risk of long-term sickness absence.

Science.gov (United States)

Schouten, Lianne S; Bültmann, Ute; Heymans, Martijn W; Joling, Catelijne I; Twisk, Jos W R; Roelen, Corné A M

2016-04-01

The Work Ability Index (WAI) identifies non-sicklisted workers at risk of future long-term sickness absence (LTSA). The WAI is a complicated instrument and inconvenient for use in large-scale surveys. We investigated whether shortened versions of the WAI identify non-sicklisted workers at risk of LTSA. Prospective study including two samples of non-sicklisted workers participating in occupational health checks between 2010 and 2012. A heterogeneous development sample (N= 2899) was used to estimate logistic regression coefficients for the complete WAI, a shortened WAI version without the list of diseases, and single-item Work Ability Score (WAS). These three instruments were calibrated for predictions of different (≥2, ≥4 and ≥6 weeks) LTSA durations in a validation sample of non-sicklisted workers (N= 3049) employed at a steel mill, differentiating between manual (N= 1710) and non-manual (N= 1339) workers. The discriminative ability was investigated by receiver operating characteristic analysis. All three instruments under-predicted the LTSA risks in both manual and non-manual workers. The complete WAI discriminated between individuals at high and low risk of LTSA ≥2, ≥4 and ≥6 weeks in manual and non-manual workers. Risk predictions and discrimination by the shortened WAI without the list of diseases were as good as the complete WAI. The WAS showed poorer discrimination in manual and non-manual workers. The WAI without the list of diseases is a good alternative to the complete WAI to identify non-sicklisted workers at risk of future LTSA durations ≥2, ≥4 and ≥6 weeks. © The Author 2015. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.

Mobile Applications for Knowledge Workers and Field Workers

Directory of Open Access Journals (Sweden)

Stefan Stieglitz

2015-01-01

Full Text Available In recent years, the diffusion of mobile applications (mobile apps has risen significantly. Nowadays, mobile business apps are strongly emerging in business, enhancing productivity and employees’ satisfaction, whilst the usage of customized individual enterprise apps is still an exception. Standardized business apps enable basic functionalities, for example, mobile data storage and exchange (e.g., Dropbox, communication (e.g., Skype, and other routine processes, which support mobile workers. In addition, mobile apps can, for example, increase the flexibility of mobile workers by easing the access to firm’s information from outside the enterprise and by enabling ubiquitous collaboration. Hence, mobile apps can generate competitive advantages and can increase work efficiency on a broad scale. But mobile workers form no coherent group. Our research reveals, based on two case studies, that they can be clustered into two groups: knowledge workers and field workers. Knowledge workers and field workers fulfill different tasks and work in different environments. Hence, they have different requirements for mobile support. In this paper we conclude that standardized mobile business apps cannot meet the different requirements of various groups of mobile workers. Task- and firm-specific (individualized requirements determine the specification, implementation, and application of mobile apps.

Analysis of mechanical damage by drawing on spheroid ABNT 1080 steel wire; Analise do dano mecanico na trefilacao de arame de aco ABNT 1080 esferoidizado

Energy Technology Data Exchange (ETDEWEB)

Almeida Ferreira, Sergio A. de; Cetlin, Paulo R.; Coutinho, Carlos A.B. [Minas Gerais Univ., Belo Horizonte, MG (Brazil). Dept. de Engenheria Metalurgica

1990-12-31

Patented Brazilian 1080 carbon steel wires were isothermal annealed at 720 deg C for different times to produce spheroid carbides of varying average diameters. The heat treated wires were then drawn to rupture. Longitudinal sections of the drawn wires were prepared after each drawing pass for analysis of the mechanical damage caused by the process. It was found that the damage observed in the drawn wires showed a similar development to the damage caused by uniaxial tensile stresses in the same material. 8 figs., 1 tab., 4 refs.

Interaction model of steel ladle of continuous caster in steel works

Directory of Open Access Journals (Sweden)

Huang Bang Fu

2016-01-01

Full Text Available For further research on the precondition and interoperability model of interaction ladles among continuous caster, this article takes steel ladle of Y steel works as the object of research. On the basis of turnover number calculation model of single cast steel ladle, the relationship between cast number and the turnover number and turnover times and last turnover number are further analyzed. The simulation of steel ladle turnover rules was taken on the 2 continuous casters with Gantt chart. After that, the relationships between turnover number and last turnover number and non-turnover number are researched deeply. Combining with the Gantt chart, the expressions of start casting time and empty ladle ending time and heavy ladle starting time were put forward. The precondition of steel ladle interaction is obtained, which means the exchange ladle should not undertaking transport task in first stop continuous caster, and the empty ladle end time of exchange ladle of first stop continuous caster should early than the heavy ladle start time of last stop continuous caster. After applying the model to practice, 3 steel ladles of No.2 continuous caster can be reduced. This research results is supplying theoretical basis for steel ladle controlling and production organization optimization, and enriches the theory and method of metallurgical process integration.

Brazilian Studies Then and Now

Directory of Open Access Journals (Sweden)

Anthony Pereira

2012-09-01

Full Text Available In 1912 the Brazilian diplomat and scholar Manuel de Oliveira Lima gave six lectures at Stanford University that encapsulated his views of what we now call Brazilian Studies. This article summarizes Oliveira Lima’s lectures. It then points out three aspects of Oliveira Lima’s worldview that are problematic from the perspective of the twenty-first century: his Eurocentrism; the unproblematic nature of the nation-state in his thinking; and his largely negative view of Brazil’s racial heritage. The third part of the essay analyzes three aspects of Oliveira Lima’s lectures that are still contemporary. These are the need to establish an adequate comparative context for the study of Brazil; the difficulty of justifying an academic discipline that revolves around the study of a single country; and the challenge of uniting disparate and specialized disciplines in order to appreciate Brazil’s complexity and trajectory in the modern world. In the conclusion, some guidelines for maintaining Brazilian Studies as a vibrant field are suggested.

Brazilian and Cape Verdian literatures for Afro-Brazilian learning

Directory of Open Access Journals (Sweden)

Norma Sueli Rosa Lima

2016-12-01

Full Text Available This article proposes to examine the dialogue between the literary produc-tions from Brazil and Cape Verde from the point of view of the role and representation of orality (Creole / Brazilian Portuguese, colonial and post-colonial perspectives and their cultural and ethnic specificities.---DOI: http://dx.doi.org/10.21881/abriluff.2016n17a385

Competitiveness in the Brazilian oil industry. The Brazilian 'oil diamond'

International Nuclear Information System (INIS)

Zamith, R.; Moutinho Dos Santos, E.

2000-01-01

It is recognized the economic benefits that might follow the opening process of the Brazilian oil and natural gas industry, which shall experience a fast expansion with the arrival of national and international private investors. However, we should not neglect the broader impact of this process on the future development of all that cluster of national agents that lived around and served the former national oil monopoly, managed by the Brazilian National Oil Company, Petrobras. This work focuses on this larger perspective, discussing about the capacity of Brazil to sustain and expand its competitiveness in the oil business as well as to obtain the maximum economic development from the exploration of its oil and gas reserves. We adopt the work of Michael Porter, from the University of Harvard, about the Competitive Advantage of Nations, as a theoretical model to analyze the Competitive Advantage of Brazil in the global oil industry. By introducing the concept of ''oil diamond'', adapted from the notion introduced by this author, we develop a new understanding of national competitiveness in the oil sector. In this paper, we present the general model as well as a brief characterization of the results found for Brazil Subsequently, we focus on just one leg of the model, for which we discuss, with more detail, about the competitive condition of the country in the opening-up scenario. This leg regards the so-called supporting and supplementary industries that constitute what is denominated in the French tradition the ''para petroleum'' industry. We analyze the conditions for the Brazilian domestic ''para petroleum industry'' to survive and grow in the new competitive environment. (authors)

Beyond Nationality: Dispatches from Immigrant Workers in the Global City

Directory of Open Access Journals (Sweden)

Manuel ABRANTES

2012-05-01

Full Text Available Research on migration policy, social structures and labour market dynamics underlines the persistent vulnerability of immigrants in the labour market of contemporary western societies. However, little attention has been paid to the diverse manners in which these factors overlap in the life of migrants moving within the same origin and destination settings. This article examines the case of Brazilian-born migrants working in Amsterdam, drawing on the analysis of statistical data, policy documents and fifteen life stories. It starts by explaining the aim of the research and the choice of origin and destination units. Findings are organized according to four key elements: legal status, gender, year of arrival, and occupation. It is argued that these elements comprise increasing differentiation mechanisms and provide an improved notion of what is at stake for migrant workers dwelling in the global city. The main conclusion is that international borders are undergoing a significant reorganization in their daily operation, in particular due to concomitant changes in migration law and flexibility strategies in the labour market. Reinforcement of distinct categories of migrants, expansion of rights for relatives or civil partners of European Union citizens and increasing pressure over undocumented workers require future research to consider whether migration policy is being replaced by a global order of human selection owing more to social and economic profile than nationality.

Age-hardening susceptibility of high-Cr ODS ferritic steels and SUS430 ferritic steel

Energy Technology Data Exchange (ETDEWEB)

Chen, Dongsheng, E-mail: chen.dongsheng85@gmail.com [Graduate School of Energy Science, Kyoto University, Gokasho, Uji, Kyoto 611-0011 (Japan); Kimura, Akihiko; Han, Wentuo; Je, Hwanil [Institute of Advanced Energy, Kyoto University, Gokasho, Uji, Kyoto 611-0011 (Japan)

2015-10-15

Highlights: • The role of oxide particles in α/α′ phase decomposition behavior; microstructure of phase decomposition observed by TEM. • The characteristics of ductility loss caused by age-hardening. • Correlation of phase decomposition and age-hardening explained by dispersion strengthened models. • Age-hardening susceptibility of ODS steels and SUS430 steel. - Abstract: The effect of aging on high-Cr ferritic steels was investigated with focusing on the role of oxide particles in α/α′ phase decomposition behavior. 12Cr-oxide dispersion strengthened (ODS) steel, 15Cr-ODS steel and commercial SUS430 steel were isothermally aged at 475 °C for up to 10,000 h. Thermal aging caused a larger hardening in SUS430 than 15Cr-ODS, while 12Cr-ODS showed almost no hardening. A characteristic of the ODS steels is that the hardening was not accompanied by the significant loss of ductility that was observed in SUS430 steel. After aging for 2000 h, SUS430 steel shows a larger ductile–brittle transition temperature (DBTT) shift than 15Cr-ODS steel, which suggests that the age-hardening susceptibility is lower in 15Cr-ODS steel than in conventional SUS430 steel. Thermal aging leaded to a large number of Cr-rich α′ precipitates, which were confirmed by transmission electron microscopy (TEM). Correlation of age-hardening and phase decomposition was interpreted by Orowan type strengthening model. Results indicate that oxide particles cannot only suppress ductility loss, but also may influence α/α′ phase decomposition kinetics.

Radiological impact on the UK population of industries which use or produce materials containing enhanced levels of naturally occurring radionuclides. Part II: the steel production industry

International Nuclear Information System (INIS)

Crockett, G.M.; Smith, K.R.; Oatway, W.B.; Mobbs, S.F.

2003-01-01

This report contains an assessment of the radiological impact on the UK population of the steel production industry within the UK. The radiological impact of the primary industry, the waste streams produced and the use of by-product slag have been considered. Individual doses from atmospheric releases from ail currently operating integrated steel plants in the UK are less than 10 μSv y -1 for all age groups. The per caput dose rate in the UK population from 500 years of continuous steel production at the current levels is estimated to be 0.1 μSv y -1 . Estimated maximum doses to workers at the steel production plant, landfill workers, and workers manufacturing and using building materials containing slag were generally less than 20 μSv y -1 . The estimated radon concentrations in buildings constructed from concrete containing slag depend upon the radon emanation fraction assumed for the material. Experimental data in this area is sparse, and thus a range was considered. The estimated radon concentrations in buildings constructed from concrete containing slag ranged between 7.0 and 10.8 Bq m -3 , compared with 9.9 Bq m -3 when slag-free concrete is assumed. The estimated dose from radon exposure ranges between 363 μSv y -1 and 559 μSv y -1 , compared with 510 μSv y -1 when slag-free concrete is used. The estimated external dose to an individual in a house constructed using concrete containing slag is 790 μSv y -1 compared with 758 μSv y -1 for slag-free concrete. The overall effect of the use of the slag in building materials therefore ranges between a reduction in dose of 115 μSv y -1 and an increase of 81 μSv y -1 . Other scenarios involving exposure of members of the public to slag resulted in doses of less than 5 μSv y -1 . The estimated peak individual risk from landfill disposal of steel industry waste is less than approximately 1 10 -8 y -1 . Currently, radiological controls on the operation of steel production sites are confined to the

The Corporate Governance of Privately Controlled Brazilian Firms

Directory of Open Access Journals (Sweden)

Érica C. R. Gorga

2009-09-01

Full Text Available We provide an overview of the corporate governance practices of Brazilian public companies, based primarily on an extensive 2005 survey of 116 companies. We focus on the 88 responding Brazilian private firms which are not majority owned by the state or a foreign company. We identify areas where Brazilian corporate governance is relatively strong and weak. Board independence is an area of weakness: The boards of most Brazilian private firms are comprised entirely or almost entirely of insiders or representatives of the controlling family or group. Many firms have zero independent directors. At the same time, minority shareholders have legal rights to representation on the boards of many firms, and this representation is reasonably common. Financial disclosure lags behind world standards. Only a minority of firms provide a statement of cash flows or consolidated financial statements. However, many provide English language financial statements, and an English language version of their website. Audit committees are uncommon, but many Brazilian firms use an alternate approach to ensuring financial statement accuracy – establishing a fiscal board. A minority of firms provide takeout rights to minority shareholders on a sale of control. Controlling shareholders often use shareholders agreements to ensure control.

Brazilian sandy beaches: characteristics, ecosystem services, impacts, knowledge and priorities

Directory of Open Access Journals (Sweden)

Antonia Cecília Zacagnini Amaral

Full Text Available ABSTRACT Sandy beaches constitute a key ecosystem and provide socioeconomic goods and services, thereby playing an important role in the maintenance of human populations and in biodiversity conservation. Despite the ecological and social importance of these ecosytems, Brazilian sandy beaches are significantly impacted by human interference, chemical and organic pollution and tourism, as well as global climate change. These factors drive the need to better understand the environmental change and its consequences for biota. To promote the implementation of integrated studies to detect the effects of regional and global environmental change on beaches and on other benthic habitats of the Brazilian coast, Brazilian marine researchers have established The Coastal Benthic Habitats Monitoring Network (ReBentos. In order to provide input for sample planning by ReBentos, we have conducted an intensive review of the studies conducted on Brazilian beaches and summarized the current knowledge about this environment. In this paper, we present the results of this review and describe the physical, biological and socioeconomics features of Brazilian beaches. We have used these results, our personal experience and worldwide literature to identify research projects that should be prioritized in the assessment of regional and global change on Brazilian sandy beaches. We trust that this paper will provide insights for future studies and represent a significant step towards the conservation of Brazilian beaches and their biodiversity.

Redemption of asthma pharmaceuticals among stainless steel and mild steel welders

DEFF Research Database (Denmark)

Kristiansen, Pernille; Jørgensen, Kristian Tore; Hansen, Johnni

2015-01-01

PURPOSE: The purpose was to examine bronchial asthma according to cumulative exposure to fume particulates conferred by stainless steel and mild steel welding through a proxy of redeemed prescribed asthma pharmaceuticals. METHODS: A Danish national company-based historical cohort of 5,303 male ever...... was estimated by combining questionnaire data on welding work with a welding exposure matrix. The estimated exposure accounted for calendar time, welding intermittence, type of steel, welding methods, local exhaustion and welding in confined spaces. Hazard ratios (HRs) with 95 % confidence intervals (CIs) were...... nonsignificant increased rate of redemption of asthma medicine was observed among high-level exposed stainless steel welders in comparison with low-level exposed welders (HR 1.54, 95 % CI 0.76-3.13). This risk increase was driven by an increase risk among non-smoking stainless steel welders (HR 1.46, 95 % CI 1...

Review of the Brazilian experience in the licensing of nuclear power plants

International Nuclear Information System (INIS)

Lederman, L.; Laborne, J.J.

1983-01-01

Survey of the licensing of the Brazilian Nuclear Power Plants (NPPs) is presented. The organization and technical expertise of the Comissao Nacional de Energia Nuclear, the Brazilian Regulatory Body, is reviewed with regard to in-house experience, foreign consultants, agreements with regulatory bodies of other countries and research contracts with Brazilian univerisities. The application of the two-stage licensing process and the stage of development of Brazilian nuclear standards is described. Finally, the paper speculates about the future role of probabilistic risk assessment in the Brazilian licensing process

36th Brazilian Workshop on Nuclear Physics

CERN Document Server

Brandão de Oliveira, José Roberto; Barbosa Shorto, Julian Marco; Higa, Renato

2014-01-01

The Brazilian Workshop on Nuclear Physics (RTFNB, acronym in Portuguese) is organized annually by the Brazilian Physics Society since 1978, in order to: promote Nuclear Physics research in the country; stimulate and reinforce collaborations among nuclear physicists from around the country; disseminate advances in nuclear physics research and its applications; disseminate, disclose and evaluate the scientific production in this field.

Brazilian uranium exploration program

International Nuclear Information System (INIS)

Marques, J.P.M.

1981-01-01

General information on Brazilian Uranium Exploration Program, are presented. The mineralization processes of uranium depoits are described and the economic power of Brazil uranium reserves is evaluated. (M.C.K.) [pt

Structural Properties of the Brazilian Air Transportation Network.

Science.gov (United States)

Couto, Guilherme S; da Silva, Ana Paula Couto; Ruiz, Linnyer B; Benevenuto, Fabrício

2015-09-01

The air transportation network in a country has a great impact on the local, national and global economy. In this paper, we analyze the air transportation network in Brazil with complex network features to better understand its characteristics. In our analysis, we built networks composed either by national or by international flights. We also consider the network when both types of flights are put together. Interesting conclusions emerge from our analysis. For instance, Viracopos Airport (Campinas City) is the most central and connected airport on the national flights network. Any operational problem in this airport separates the Brazilian national network into six distinct subnetworks. Moreover, the Brazilian air transportation network exhibits small world characteristics and national connections network follows a power law distribution. Therefore, our analysis sheds light on the current Brazilian air transportation infrastructure, bringing a novel understanding that may help face the recent fast growth in the usage of the Brazilian transport network.

Structural Properties of the Brazilian Air Transportation Network

Directory of Open Access Journals (Sweden)

GUILHERME S. COUTO

2015-09-01

Full Text Available The air transportation network in a country has a great impact on the local, national and global economy. In this paper, we analyze the air transportation network in Brazil with complex network features to better understand its characteristics. In our analysis, we built networks composed either by national or by international flights. We also consider the network when both types of flights are put together. Interesting conclusions emerge from our analysis. For instance, Viracopos Airport (Campinas City is the most central and connected airport on the national flights network. Any operational problem in this airport separates the Brazilian national network into six distinct subnetworks. Moreover, the Brazilian air transportation network exhibits small world characteristics and national connections network follows a power law distribution. Therefore, our analysis sheds light on the current Brazilian air transportation infrastructure, bringing a novel understanding that may help face the recent fast growth in the usage of the Brazilian transport network.

Worker Entrepreneurship.

Science.gov (United States)

Doucouliagos, Chris

1992-01-01

Evaluates the experience of worker entrepreneurship, highlighting successes and failures in Europe, and analyzes the relative importance of factors to worker entrepreneurship such as access to finance, education and training, organizational culture, and worker risk taking. (JOW)

Nitrogen-alloyed martensitic steels

International Nuclear Information System (INIS)

Berns, H.

1988-01-01

A report is presented on initial results with pressure-nitrided martensitic steels. In heat-resistant steels, thermal stability and toughness are raised by nitrogen. In cold work steel, there is a more favourable corrosion behaviour. (orig./MM) [de

MICROALLOYED STEELS FOR THE AUTOMOTIVE INDUSTRY

Directory of Open Access Journals (Sweden)

Debanshu Bhattacharya

2014-12-01

Full Text Available Two major drivers for the use of newer steels in the automotive industry are fuel efficiency and increased safety performance. Fuel efficiency is mainly a function of weight of steel parts, which in turn, is controlled by gauge and design. Safety is determined by the energy absorbing capacity of the steel used to make the part. All of these factors are incentives for the U.S. automakers to use both Highly Formable and Advanced High Strength Steels (AHSS to replace the conventional steels used to manufacture automotive parts in the past. AHSS is a general term used to describe various families of steels. The most common AHSS is the dual-phase steel that consists of a ferrite-martensite microstructure. These steels are characterized by high strength, good ductility, low tensile to yield strength ratio and high bake hardenability. Another class of AHSS is the complex-phase or multi-phase steel which has a complex microstructure consisting of various phase constituents and a high yield to tensile strength ratio. Transformation Induced Plasticity (TRIP steels is another class of AHSS steels finding interest among the U.S. automakers. These steels consist of a ferrite-bainite microstructure with significant amount of retained austenite phase and show the highest combination of strength and elongation, so far, among the AHSS in use. High level of energy absorbing capacity combined with a sustained level of high n value up to the limit of uniform elongation as well as high bake hardenability make these steels particularly attractive for safety critical parts and parts needing complex forming. A relatively new class of AHSS is the Quenching and Partitioning (Q&P steels. These steels seem to offer higher ductility than the dual-phase steels of similar strengths or similar ductility as the TRIP steels at higher strengths. Finally, martensitic steels with very high strengths are also in use for certain parts. The most recent initiative in the area of AHSS

Notch aspects of RSP steel microstructure

Directory of Open Access Journals (Sweden)

Michal Černý

2012-01-01

Full Text Available For a rather long time, basic research projects have been focused on examinations of mechanical properties for Rapid Solidification Powder (RSP steels. These state-of-art steels are commonly known as “powdered steels“. In fact, they combine distinctive attributes of conventional steel alloys with unusual resistance of construction material manufactured by so called “pseudo-powdered” metallurgy.Choice of suitable materials for experimental verification was carried out based on characteristic application of so called “modern steel”. First, groups of stainless and tool steel types (steel grades ČSN 17 and 19 were selected. These provided representative specimens for the actual comparison experiment. For stainless steel type, two steel types were chosen: hardenable X47Cr14 (ČSN 17 029 stainless steel and non-hardenable X2CrNiMo18-14-3 (ČSN 17 350 steel. They are suitable e.g. for surgical tools and replacements (respectively. For tooling materials, C80U (ČSN 19 152 carbon steel and American D2 highly-alloyed steel (ČSN “equivalent” being 19 572 steel were chosen for the project. Finally, the M390 Böhler steel was chosen as representative of powdered (atomized steels. The goal of this paper is to discuss structural aspects of modern stainless and tool steel types and to compare them against the steel made by the RSP method. Based on the paper's results, impact of powdered steel structural characteristics on the resistance to crack initiation shall be evaluated.

The Brazilian Twin Registry.

Science.gov (United States)

Ferreira, Paulo H; Oliveira, Vinicius C; Junqueira, Daniela R; Cisneros, Lígia C; Ferreira, Lucas C; Murphy, Kate; Ordoñana, Juan R; Hopper, John L; Teixeira-Salmela, Luci F

2016-12-01

The Brazilian Twin Registry (BTR) was established in 2013 and has impelled twin research in South America. The main aim of the initiative was to create a resource that would be accessible to the Brazilian scientific community as well as international researchers interested in the investigation of the contribution of genetic and environmental factors in the development of common diseases, phenotypes, and human behavior traits. The BTR is a joint effort between academic and governmental institutions from Brazil and Australia. The collaboration includes the Federal University of Minas Gerais (UFMG) in Brazil, the University of Sydney and University of Melbourne in Australia, the Australian Twin Registry, as well as the research foundations CNPq and CAPES in Brazil. The BTR is a member of the International Network of Twin Registries. Recruitment strategies used to register twins have been through participation in a longitudinal study investigating genetic and environmental factors for low back pain occurrence, and from a variety of sources including media campaigns and social networking. Currently, 291 twins are registered in the BTR, with data on demographics, zygosity, anthropometrics, and health history having been collected from 151 twins using a standardized self-reported questionnaire. Future BTR plans include the registration of thousands of Brazilian twins identified from different sources and collaborate nationally and internationally with other research groups interested on twin studies.

Catalysts of worker-to-worker violence and incivility in hospitals.

Science.gov (United States)

Hamblin, Lydia E; Essenmacher, Lynnette; Upfal, Mark J; Russell, Jim; Luborsky, Mark; Ager, Joel; Arnetz, Judith E

2015-09-01

To identify common catalysts of worker-to-worker violence and incivility in hospital settings. Worker-to-worker violence and incivility are prevalent forms of mistreatment in healthcare workplaces. These are forms of counterproductive work behaviour that can lead to negative outcomes for employees, patients and the organisation overall. Identifying the factors that lead to co-worker mistreatment is a critical first step in the development of interventions targeting these behaviours. Retrospective descriptive study. Qualitative content analysis was conducted on the total sample (n = 141) of employee incident reports of worker-to-worker violence and incivility that were documented in 2011 at a large American hospital system. More than 50% of the incidents involved nurses, and the majority of incidents did not involve physical violence. Two primary themes emerged from the analysis: Work Behaviour and Work Organisation. Incidents in the Work Behaviour category were often sparked by unprofessional behaviour, disagreement over responsibilities for work tasks or methods of patient care, and dissatisfaction with a co-worker's performance. Incidents in the Work Organisation category involved conflicts or aggression arising from failure to following protocol, patient assignments, limited resources and high workload. Incidents of worker-to-worker violence and incivility stemmed from dissatisfaction with employee behaviour or from organisational practices or work constraints. These incident descriptions reflect worker dissatisfaction and frustration, resulting from poor communication and collaboration between employees, all of which threaten work productivity. Violence and incivility between hospital employees can contribute to turnover of top performers, hinder effective teamwork and jeopardise the quality of patient care. Identification of common catalysts for worker-to-worker violence and incivility informs the development of mistreatment prevention programmes that can be

Indoor Air Quality in Brazilian Universities

Directory of Open Access Journals (Sweden)

Sonia R. Jurado

2014-07-01

Full Text Available This study evaluated the indoor air quality in Brazilian universities by comparing thirty air-conditioned (AC (n = 15 and naturally ventilated (NV (n = 15 classrooms. The parameters of interest were indoor carbon dioxide (CO2, temperature, relative humidity (RH, wind speed, viable mold, and airborne dust levels. The NV rooms had larger concentration of mold than the AC rooms (1001.30 ± 125.16 and 367.00 ± 88.13 cfu/m3, respectively. The average indoor airborne dust concentration exceeded the Brazilian standards (<80 µg/m3 in both NV and AC classrooms. The levels of CO2 in the AC rooms were significantly different from the NV rooms (1433.62 ± 252.80 and 520.12 ± 37.25 ppm, respectively. The indoor air quality in Brazilian university classrooms affects the health of students. Therefore, indoor air pollution needs to be considered as an important public health problem.

From Gabriela to Juma: Female Erotic Images on Brazilian Soap Operas

Directory of Open Access Journals (Sweden)

Luciana Rosar Fornazari Klanovicz

2010-01-01

Full Text Available This paper aims at discussing some images constituted as erotic on Brazilian television. The Brazilian soap operas Gabriela (Rede Globo, 1975, and Pantanal (Rede Manchete, 1990, and their main characters, Gabriela and Juma, will be analyzed in detail. The Veja Magazine had a most influent part in constituting such “erotic” subjects through the divulging and commenting of positive, seductive attributes on the bodies of the eroticized actresses. Gabriela and Juma are important characters because they support the stereotypes of a Brazilian sensuality and the strong mundane aspects, such as sex-appeal and dark bodies. The text explores the Brazilian television production (soap operas in order to map the images which have contributed to build the subjectively Brazilian eroticism.

Trust within Brazilian New Economy Organizations: an Empirical Investigation of Gender Effects Benchmarked on Brazilian Old Economy Organizations

Directory of Open Access Journals (Sweden)

Marco Tulio Zanini

2009-07-01

Full Text Available It has been suggested that one of the negative aspects of the New Economy has been growing organizational survival-risk both at the firm and the sector levels. This precarious positioning of the firm has profoundly changed the work environment resulting in the dissolution of job-definition-boundaries, thereby raising the intensity of work and finally affecting the level and nature of trust in the workplace. This is the starting point for our study. Using a questionnaire developed by Gillespie, we investigated gender profiles concerning trust in Supervisors, Peers, and Team in the New and the Old Economies for Brazilian managers. The results show that, for the New Economy, Brazilian women are more willing to give trust to Supervisors whereas Brazilian men expressed higher levels of trust when dealing with Team members. The Peer results are mixed. For the Old Economy, men uniformly express higher levels of trust compared to women over all three reference groups. Finally, for gender matched comparisons, those working in the Brazilian Old Economy firms express higher levels of trust compared to their counterparts in the New Economy independent of gender or time worked. We conclude by discussing the control implications of the above results.

Rapid naming, phonological memory and reading fluency in Brazilian bilingual students.

Science.gov (United States)

Fleury, Fernanda Oppenheimer; Avila, Clara Regina Brandão de

2015-01-01

To characterize the performance of Brazilian students exposed to two languages in reading fluency, phonological memory, and rapid naming, according to grade level, and to investigate correlations between these variables. Sixty students took part in this study (50% female), enrolled in the third to the fifth grades of two elementary schools of the city of São Paulo. They constituted two groups - bilingual group: 30 Brazilian children whose mother tongue and language spoken at home was Brazilian Portuguese and who were daily exposed to English at school for a period not shorter than three years; monolingual group: 30 students, from a monolingual Brazilian elementary school, who were paired by gender, age, and grade level with the bilingual students. Foreign children, children with complaint or indication of speech and language disorder, or who had been retained were excluded. A rapid automatized naming, pseudoword repetition, and oral reading tests were administered. The bilingual children were assessed in both languages and their performances were compared among themselves and with the monolingual group, which was only assessed in Brazilian Portuguese. The bilingual group showed better performance in English, rapid naming, and pseudoword repetition tasks, whereas Brazilian Portuguese, in reading fluency. A higher number of correlations were found in Brazilian Portuguese. The results suggest that the acquisition of a second language may positively influence the abilities of rapid naming, reading rate, and accuracy. Brazilian bilingual students performed better in tasks of phonological memory in English and Brazilian Portuguese performed better in reading fluency. Different correlation patterns were found between the rapid naming, accuracy, and reading rate, in the bilingual group analysis, in both languages.

Steel-reinforced concrete-filled steel tubular columns under axial and lateral cyclic loading

Science.gov (United States)

Farajpourbonab, Ebrahim; Kute, Sunil Y.; Inamdar, Vilas M.

2018-03-01

SRCFT columns are formed by inserting a steel section into a concrete-filled steel tube. These types of columns are named steel-reinforced concrete-filled steel tubular (SRCFT) columns. The current study aims at investigating the various types of reinforcing steel section to improve the strength and hysteresis behavior of SRCFT columns under axial and lateral cyclic loading. To attain this objective, a numerical study has been conducted on a series of composite columns. First, FEM procedure has been verified by the use of available experimental studies. Next, eight composite columns having different types of cross sections were analyzed. For comparison purpose, the base model was a CFT column used as a benchmark specimen. Nevertheless, the other specimens were SRCFT types. The results indicate that reinforcement of a CFT column through this method leads to enhancement in load-carrying capacity, enhancement in lateral drift ratio, ductility, preventing of local buckling in steel shell, and enhancement in energy absorption capacity. Under cyclic displacement history, it was observed that the use of cross-shaped reinforcing steel section causes a higher level of energy dissipation and the moment of inertia of the reinforcing steel sections was found to be the most significant parameter affecting the hysteresis behavior of SRCFT columns.

Structural amorphous steels

International Nuclear Information System (INIS)

Lu, Z.P.; Liu, C.T.; Porter, W.D.; Thompson, J.R.

2004-01-01

Recent advancement in bulk metallic glasses, whose properties are usually superior to their crystalline counterparts, has stimulated great interest in fabricating bulk amorphous steels. While a great deal of effort has been devoted to this field, the fabrication of structural amorphous steels with large cross sections has remained an alchemist's dream because of the limited glass-forming ability (GFA) of these materials. Here we report the discovery of structural amorphous steels that can be cast into glasses with large cross-section sizes using conventional drop-casting methods. These new steels showed interesting physical, magnetic, and mechanical properties, along with high thermal stability. The underlying mechanisms for the superior GFA of these materials are discussed

Prospects of structural steels

International Nuclear Information System (INIS)

Bannykh, O.A.

2012-01-01

The current state of world steel production is considered as well as the development strategy of metallurgy industry in the Russian Federation through to 2020. The main factors determining the conservation of steel as perspective material for industry are given: energy expenses on production, the well-proven recirculation technology, the capability of changing steel properties in wide range, temperature range of operation. The conclusion is made that in the immediate future steel will not lose its importance [ru

DEA investment strategy in the Brazilian stock market

OpenAIRE

Newton da Costa, Jr.; Marcus Lima; Edgar Lanzer; Ana Lopes

2008-01-01

This paper presents a multi-period investment strategy using Data Envelopment Analysis (DEA) in the Brazilian stock market. Results show that the returns based on the DEA strategy were superior to the returns of a Brazilian stock index in most of the 22 quarters analyzed, presenting a significant Jensen's alpha.

Mechanical properties and fatigue strength of high manganese non-magnetic steel/carbon steel welded joints

International Nuclear Information System (INIS)

Nakaji, Eiji; Ikeda, Soichi; Kim, You-Chul; Nakatsuji, Yoshihiro; Horikawa, Kosuke.

1997-01-01

The dissimilar materials welded joints of high manganese non-magnetic steel/carbon steel (hereafter referred to as DMW joints), in which weld defects such as hot crack or blowhole are not found, were the good quality. Tensile strength of DMW joints was 10% higher than that of the base metal of carbon steel. In the bend tests, the DMW joints showed the good ductility without crack. Charpy absorbed energy at 0(degC) of the DMW joints was over 120(J) in the bond where it seems to be the lowest. Large hardening or softening was not detected in the heat affected zone. Fatigue strength of the DMW joints is almost the same with that of the welded joints of carbon steel/carbon steel. As the fatigue strength of the DMW joints exceeds the fatigue design standard curve of JSSC for carbon steel welded joints, the DMW joints can be treated the same as the welded joints of carbon steel/carbon steel of which strength is lower than that of high manganese non-magnetic steel, from the viewpoint of the fatigue design. (author)

Damascus steel ledeburite class

Science.gov (United States)

Sukhanov, D. A.; Arkhangelsky, L. B.; Plotnikova, N. V.

2017-02-01

Discovered that some of blades Damascus steel has an unusual nature of origin of the excess cementite, which different from the redundant phases of secondary cementite, cementite of ledeburite and primary cementite in iron-carbon alloys. It is revealed that the morphological features of separate particles of cementite in Damascus steels lies in the abnormal size of excess carbides having the shape of irregular prisms. Considered three hypotheses for the formation of excess cementite in the form of faceted prismatic of excess carbides. The first hypothesis is based on thermal fission of cementite of a few isolated grains. The second hypothesis is based on the process of fragmentation cementite during deformation to the separate the pieces. The third hypothesis is based on the transformation of metastable cementite in the stable of angular eutectic carbide. It is shown that the angular carbides are formed within the original metastable colony ledeburite, so they are called “eutectic carbide”. It is established that high-purity white cast iron is converted into of Damascus steel during isothermal soaking at the annealing. It was revealed that some of blades Damascus steel ledeburite class do not contain in its microstructure of crushed ledeburite. It is shown that the pattern of carbide heterogeneity of Damascus steel consists entirely of angular eutectic carbides. Believe that Damascus steel refers to non-heat-resistant steel of ledeburite class, which have similar structural characteristics with semi-heat-resistant die steel or heat-resistant high speed steel, differing from them only in the nature of excess carbide phase.

Micro-Abrasion Wear Resistance of Borided 316L Stainless Steel and AISI 1018 Steel

Science.gov (United States)

Reséndiz-Calderon, C. D.; Rodríguez-Castro, G. A.; Meneses-Amador, A.; Campos-Silva, I. E.; Andraca-Adame, J.; Palomar-Pardavé, M. E.; Gallardo-Hernández, E. A.

2017-11-01

The 316L stainless steel has high corrosion resistance but low tribological performance. In different industrial sectors (biomedical, chemical, petrochemical, and nuclear engineering), improvement upon wear resistance of 316L stainless steel components using accessible and inexpensive methods is critical. The AISI 1018 steel is widely used in industry, but its tribological performance is not the best among steels. Therefore, in this study the behavior of the borided 316L stainless steel and 1018 steel is evaluated under micro-abrasion wear. The boriding was carried out at 1223 K over 6 h of exposure time, resulting in a biphase layer composed of FeB/Fe2B phases. In order to evaluate Fe2B phase with no influence from FeB phase, AISI 1018 steel samples were borided at 1273 K for over 20 min and then diffusion annealed at 1273 K over 2 h to obtain a Fe2B mono-phase layer. Micro-abrasion wear resistance was evaluated by a commercial micro-abrasion testing rig using a mix of F-1200 SiC particles with deionized water as abrasive slurry. The obtained wear rates for FeB and Fe2B phases and for the 316L stainless steel were compared. Wear resistance of 316L stainless steel increases after boriding. The wear mechanisms for both phases and for the stainless steel were identified. Also, transient conditions for rolling and grooving abrasion were determined for the FeB and Fe2B phases.

TECHNOLOGY REPRESENTATION IN SOME BRAZILIAN POEMS

Directory of Open Access Journals (Sweden)

Rubel Maria Fanini

2010-07-01

Full Text Available Abstract: This article analyses how the universe of technology and labour are depicted in literary terms in some Brazilian poems from the writers Castro Alves, Mario de Andrade and Oswald de Andrade. The poets portray this universe in the following approaches: modern technology dissociated from the Brazilian context painted as traditional and archaic; associated to industrial production and to workers’ exploitation; linked to high class entertainment and as an imported good subjected to central capitalistic economies, facing difficulties to be aggregated to local production.

Attitudes Towards the Mentally Ill: A Study with Health Workers at a University Hospital in Rio de Janeiro.

Science.gov (United States)

Siqueira, Sylvia Rosa Gonçalves; Abelha, Lúcia; Lovisi, Giovanni Marcos; Sarução, Keli Rodrigues; Yang, Lawrence

2017-03-01

As there are few studies about evaluation of attitudes of health care workers to people with mental disorders in Brazil, a cross-sectional study was carried out to assess the health professionals' attitudes working in a university hospital in Rio de Janeiro and also examine the proportion of negative and positive attitudes endorsed by healthcare professionals in Brazil towards people with mental illness in comparison with other parts of the world. Data were collected using the Community Attitudes towards the Mentally Ill (CAMI) in a random sampling frame of health professionals (n = 246) working in a University Hospital in Rio de Janeiro between April 2013 and June 2013. The CAMI consists of four sub-scales: Authoritarianism, Benevolence, Social Restrictiveness and Community Mental Health Ideology. The results showed attitudes that range from neutral to positive, with the Benevolence and Social Restrictiveness sub-scales showing the least stigmatizing results. The following individual characteristics were associated with negative attitudes: lower levels of education and less clinical experience. In general, health workers attitudes towards service users are characterized as positive when compared with other international studies. However, educational programs for health workers should be reinforced to further promote pre-existing positive attitudes towards people with mental health and the implementation of Brazilian Mental Health Policies.

luxury marketing: internationalization strategies for brazilian jewelry companies

Directory of Open Access Journals (Sweden)

Chaline Gasperini

2010-04-01

Full Text Available This article seeks to make an analysis of the luxury market and of Brazilian jewelry companies. The main objective is to analyze the attraction of external marketing to luxury brands internationalization, emphasizing Brazilian jewelry companies. First, the national environment of luxury market an jewelry in Brazil is presented. In sequence, it will address the possible goals, risks and opportunities that internationalized jewelry companies face in the expansion process and its difficulties in foreign markets. Finally, some forms of internationalization will be presented based on the case of the Brazilian jewelry companies H Stern and Talento Jóias. The methodology used in this article is exploratory, with documental analysis and in depth interview. As theoretical foundations for the article, the themes luxury, exportations, company internationalization and global market were addressed. The main author(s researched were: Allérès (2006, Almeida (2007, Czinkota (2001, Grande (2007, Lipovetsky e Roux (2005. Among the main conclusions, Brazilian jewelry companies have great advantages compared to other countries, having the possibility to use Brazilian nature resources, like precious stones and gems, thus, it become more interesting and viable to innovate and conquer external market. Besides, jewelry market attractions make several entrepreneurs interested in opening business in this field, and lately internationalize them, such as H Stern case.

The impact of turn around time in Brazilian Navy inventories

OpenAIRE

Casagrande, Mauricio

2000-01-01

Approved for public release; distribution is unlimited. This thesis analyzes how the operation of helicopters produced and supported by manufacturers in various countries affect Brazilian Navy repairable inventories levels and costs. The research is based on a scenario where the Brazilian Navy operates 68 helicopters, manufactured by contractors in USA, France, England and Italy, and the Brazilian Navy relies on these manufacturers for depot-level maintenance. We develop a simulation model...

Overview of the technological enhancement of natural radiation in the Brazilian non-uranium mining industry

International Nuclear Information System (INIS)

Fernandes, H.M.; Pires do Rio, M.A.; Rosa, R.; Veiga, L.H.S.; Amaral, E.C.S.

2002-01-01

The mining and milling of ores with significant amounts of uranium and thorium associated to the main ore has the potential to pose undue health risks to members of the general public and workers. In order to assess the status of this problem in the Brazilian non-uranium mining industries a comprehensive investigation project has been undertaken. The adopted methodology was based on the detailed analysis of each investigated industry operational flowplan, mass balance calculations, risk assessment (operational and post-operational scenarios taken into account) and environmental management principles. This papers addresses the main issues arising from the investigation effort, reports the most relevant conclusions and states the future studies to be implemented. It could be observed that these industries have the potential to cause relevant radiological impacts and must be regulated/controlled as to avoid these problems. (author)

Stahlschüssel key to steel

CERN Document Server

Wegst, W S

2016-01-01

The Key to Steel (Stahlschlüssel/Stahlschluessel) cross reference book will help you to decode / decipher steel designations and find equivalent materials worldwide. The 2016 edition includes more than 70,000 standard designations and trade names from approximately 300 steelmakers and suppliers. Presentation is trilingual: English, French, and German. Materials covered include structural steels, tool steels, valve steels, high temperature steels and alloys, stainless and heat-resisting steels, and more. Standards and designations from 25 countries are cross-referenced.

Methods of forging steel

OpenAIRE

Pečoler, Primož

2014-01-01

The following work presents processes of steel forming, challenges when forging steel, forming machines suitable for forging and which choice of machine is most suitable for forging. We can separate steel forming to free forging and drop forging. Free forging can be divided to hand forging and machine forging. The correct choice of furnaces is also very important. We must reach correct temperature in the furnace for raw steel to melt with less scalings. In diploma I mentioned some machine...

Corrosion characteristics of DMR-1700 steel and comparison with different steels in marine environment

International Nuclear Information System (INIS)

Gurrappa, I.; Malakondaiah, G.

2005-01-01

In the present paper, a systematic corrosion study has been carried out on DMR-1700 steel to understand the protective nature of oxide scale that forms on its surface under marine environmental conditions. Further, the studies related to oxide scales as well as pitting and crevice corrosion resistance of both stainless steels and widely used low alloy steel EN24 in marine environment have been studied for comparison purpose. The surface morphologies of corroded steels have been observed under scanning electron microscope (SEM) in order to understand the nature of corrosion. A high performance protective coating that has been developed for protection of low alloy steels DMR-1700 and EN24 against corrosion is presented after stressing the importance of surface engineering in enhancing the life of steels. Based on the studies with different techniques, DMR-1700 steel has been recommended for manufacture of components used in aerospace systems in association with appropriate protective coating for improving their efficiency

Characterization of D2 tool steel friction surfaced coatings over low carbon steel

International Nuclear Information System (INIS)

Sekharbabu, R.; Rafi, H. Khalid; Rao, K. Prasad

2013-01-01

Highlights: • Solid state coating by friction surfacing method. • D2 tool steel is coated over relatively softer low carbon steel. • Defect free interface between tool steel coating and low carbon steel substrate. • D2 coatings exhibited higher hardness and good wear resistance. • Highly refined martensitic microstructure in the coating. - Abstract: In this work D2 tool steel coating is produced over a low carbon steel substrate using friction surfacing process. The process parameters are optimized to get a defect free coating. Microstructural characterization is carried out using optical microscopy, scanning electron microscopy and X-ray diffraction. Infrared thermography is used to measure the thermal profile during friction surfacing of D2 steel. Wear performance of the coating is studied using Pin-on-Disk wear tests. A lower rotational speed of the consumable rod and higher translational speed of the substrate is found to result in thinner coatings. Friction surfaced D2 steel coating showed fine-grained martensitic microstructure compared to the as-received consumable rod which showed predominantly ferrite microstructure. Refinement of carbides in the coating is observed due to the stirring action of the process. The infrared thermography studies showed the peak temperature attained by the D2 coating to be about 1200 °C. The combined effect of martensitic microstructure and refined carbides resulted in higher hardness and wear resistance of the coating

Safety and health of professional drivers who drive on Brazilian highways

Directory of Open Access Journals (Sweden)

Fernanda Veruska Narciso

Full Text Available ABSTRACT Traffic accidents and resulting injuries and deaths have become a global epidemic. In Brazil, most professional drivers, especially truck drivers, face irregular working hours and can be awake for more than 18 hours/day, which reduces their performance and alertness. In this article, we discuss the laws related to Brazilian professional drivers and their current amendments (No. 12,619/2012 and No. 13,103/2015 in relation to working hours at the wheel and rest breaks, which are vital for the quality of life of drivers and society in general. We note that the new law appears to be less efficient than the previous one as it causes insecurity and concern to the users of the transportation system, drivers, and employers. To restrict and reduce accidents, deaths, and injuries in traffic, appropriate legislation is essential, aiming at the safety of workers and users of highways. The law must also benefit the commercial aspect, strengthening the reduction in production and logistics losses. Additionally, traffic education programs are needed, as well as better supervision in relation to total working hours.

Profits and votes: Entrepreneurs and the government in Brazilian housing policy

Directory of Open Access Journals (Sweden)

EDNEY CIELICI DIAS

2015-12-01

Full Text Available ABSTRACTAfter more than twenty years of low housing construction output, the housing policy recovered its momentum in the country with the ascent of the Partido dos Trabalhadores (Workers' Party, PT to the seat of the federal government. This article demonstrates - through the analysis of documents, interviews and research conducted with businessmen - that the impetus of such a state policy is a part of the PT electoral strategy, which is based on economic growth and the expansion of social programs. The research analyses the dovetailing of interests between the Lula (the Brazilian President from 2003 to 2010 administration and the civil construction business - the latter concerned with expanding its business, and the former with increasing the supply of jobs and the level of economic activity. This process culminated in the launching of the largest social housing program to be implemented in the country. Minha Casa, Minha Vida (My House, My Life, is a project in whose planning building companies played a key role, performing feasibility studies and carrying out social housing projects.

The food security under another look: analysis on the evolution of the Brazilian population occupied in activities of self-consumption

Directory of Open Access Journals (Sweden)

Flávio Sacco dos Anjos

2011-02-01

Full Text Available The article analyzes the evolution of the Brazilian active population occupied in activities of self-consumption between 2001 and 2006 years. The date used come from the National Research on Sample of Domiciles. The authors examine the situation since the point of view the individuals and families (rural or urban, also classified as employers, self employed e and workers families, besides others forms of classification (exclusively agrarian, no-agrarian and pluriactive. The study reveals an important and general increment on the population employed in the self-consumption activities. However this research showed that this kind of activity is essentially feminine which occupies approximately 6.1 million of families in rural and urban areas of Brazil.

Brazilian emergency planning for radiological accidents

International Nuclear Information System (INIS)

Mendonca, A.H.

1986-01-01

Brazilian emergency planning for radiological accidents is organized to respond promptly to any emergency at nuclear power plants or other installations utilizing nuclear fuel. It consists of several committees: a general coordination committee with representatives from several federal departments, with final decision with the Brazilian Nuclear Energy Commission (CNEN), and the Federal Environmental Protection Agency (SEMA). Some committees conduct support activities. For example, the Operational Coordination Committee supervises the tasks undertaken by the Army, Navy, and Air Force in response to the needs and decisions of the general coordination committee

Animal experimentation: a legal fight in Brazilian universities

Directory of Open Access Journals (Sweden)

Fernanda Luiza Fontoura de Medeiros

2015-07-01

Full Text Available Vivisection, or the use of animals in experiments, testing or education is part of a context in which many people still think represent an emergency conflict that requires the choice of human interests rather than the interests of animals. In Brazil, the 1988 Federal Constitution, in Article 225, paragraph 1, item VII, prohibits the practice of cruelty to animals. To regulate the said device, was passed in 2008 the Law 11.794 / 2008, known as Arouca Law, establishing procedures for the scientific use of animals and the Law 9.605 / 2008, which deals with environmental crimes. However, according to Brazilian Constitution, is it possible to sustain the use of animals in teaching and research, especially in universities? The aim of this paper is to analyze the Brazilian legislation regarding the use of animals in testing, teaching and research, and to discuss the observation of this legislation during the lawsuits filled in recent years by animal advocacy organizations against several Brazilian universities. The results point to a disagreement between the practices prevailing in the universities, the legislation and the Brazilian Constitution.

Investigation of multifractality in the Brazilian stock market

Science.gov (United States)

Maganini, Natália Diniz; Da Silva Filho, Antônio Carlos; Lima, Fabiano Guasti

2018-05-01

Many studies point to a possible new stylized fact for financial time series: the multifractality. Several authors have already detected this characteristic in multiple time series in several countries. With that in mind and based on Multifractal Detrended Fluctuation Analysis (MFDFA) method, this paper analyzes the multifractality in the Brazilian market. This analysis is performed with daily data from IBOVESPA index (Brazilian stock exchange's main index) and other four highly marketable stocks in the Brazilian market (VALE5, ITUB4, BBDC4 and CIEL3), which represent more than 25% of the index composition, making up 1961 observations for each asset in the period from June 26 2009 to May 31 2017. We found that the studied stock prices and Brazilian index are multifractal, but that the multifractality degree is not the same for all the assets. The use of shuffled and surrogated series indicates that for the period and the actions considered the long-range correlations do not strongly influence the multifractality, but the distribution (fat tails) exerts a possible influence on IBOVESPA and CIEL3.

Methods of making bainitic steel materials

Science.gov (United States)

Bakas, Michael Paul; Chu, Henry Shiu-Hung; Zagula, Thomas Andrew; Langhorst, Benjamin Robert

2018-01-16

Methods of making bainitic steels may involve austenitizing a quantity of steel by exposing the quantity of steel to a first temperature. A composition of the quantity of steel may be configured to impede formation of non-bainite ferrite, pearlite, and Widmanstatten ferrite. The quantity of steel may be heat-treated to form bainite by exposing the quantity of steel to a second, lower temperature. The second, lower temperature may be stabilized by exposing the quantity of steel to the second, lower temperature in the presence of a thermal ballast.

Cost-benefit analysis of a socio-technical intervention in a Brazilian footwear company.

Science.gov (United States)

Guimarães, L B de M; Ribeiro, J L D; Renner, J S

2012-09-01

This article presents a costs-benefits analysis of a macroergonomic intervention in a Brazilian footwear company. Comparing results of a pilot line (composed by 100 multiskilled workers organized in teams) with eight traditional lines (still working in a one human being/one task model) the intervention showed to be worth pursuing since achieved gains were higher than intervention costs: there was a reduction in human resource costs (80% reduction in industrial accidents, 100% reduction in work-related musculoskeletal disorders or WMSD, medical consultations and turnover, and a 45.65% reduction in absenteeism) and production improvement (productivity increased in 3% and production waste decrease to less than 1%). The net intervention value of the intervention was around U$ 430,000 with a benefit-to-cost ratio of 7.2. Moreover, employees who worked in the pilot line understood that their quality of work life improved, compensating the anxiety brought up by the radical changes implemented. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Brazilian medicinal plants with corroborated anti-inflammatory activities: a review.

Science.gov (United States)

Ribeiro, Victor Pena; Arruda, Caroline; Abd El-Salam, Mohamed; Bastos, Jairo Kenupp

2018-12-01

Inflammatory disorders are common in modern life, and medicinal plants provide an interesting source for new compounds bearing anti-inflammatory properties. In this regard, Brazilian medicinal plants are considered to be a promising supply of such compounds due to their great biodiversity. To undertake a review on Brazilian medicinal plants with corroborated anti-inflammatory activities by selecting data from the literature reporting the efficacy of plants used in folk medicine as anti-inflammatory, including the mechanisms of action of their extracts and isolated compounds. A search in the literature was undertaken by using the following Web tools: Web of Science, SciFinder, Pub-Med and Science Direct. The terms 'anti-inflammatory' and 'Brazilian medicinal plants' were used as keywords in search engine. Tropicos and Reflora websites were used to verify the origin of the plants, and only the native plants of Brazil were included in this review. The publications reporting the use of well-accepted scientific protocols to corroborate the anti-inflammatory activities of Brazilian medicinal plants with anti-inflammatory potential were considered. We selected 70 Brazilian medicinal plants with anti-inflammatory activity. The plants were grouped according to their anti-inflammatory mechanisms of action. The main mechanisms involved inflammatory mediators, such as interleukins (ILs), nuclear factor kappa B (NF-κB), prostaglandin E2 (PGE2), cyclooxygenase (COX) and reactive oxygen species (ROS). The collected data on Brazilian medicinal plants, in the form of crude extract and/or isolated compounds, showed significant anti-inflammatory activities involving different mechanisms of action, indicating Brazilian plants as an important source of anti-inflammatory compounds.

Brazilian energy statistics - 1990. Annual bulletin of the Brazilian National Committee of the World Energy Council

International Nuclear Information System (INIS)

1990-01-01

This bulletin deals with the primary sources that carry most weight in the Brazilian energy balance: hydroelectric energy, petroleum, natural gas and coal. It contains data on ethyl alcohol derived from sugar cane since it is of major importance in Brazil's energy scenario. The Brazilian Power Sector's Environmental Master Plan is also described including the expansion planning and the handling of socio-environmental issues; the power sector's evolution in the treatment of socio-environmental issues; the guidelines for socio-environmental planning and management and the institutional and technical development in the socio-environmental area. 15 figs., 16 tabs

Milled Die Steel Surface Roughness Correlation with Steel Sheet Friction

DEFF Research Database (Denmark)

Berglund, J.; Brown, C.A.; Rosén, B.-G.

2010-01-01

This work investigates correlations between the surface topography ofmilled steel dies and friction with steel sheet. Several die surfaces were prepared by milling. Friction was measured in bending under tension testing. Linear regression coefficients (R2) between the friction and texture...

Workers of Acromyrmex echinatior leafcutter ants police worker-laid eggs, but not reproductive workers

DEFF Research Database (Denmark)

Dijkstra, Michiel B.; van Zweden, Jelle Stijn; Dirchsen, Maria

2010-01-01

Nonreproductive workers of many eusocial Hymenoptera 'police' the colony, that is, they attack reproductive sister workers or destroy their eggs (unfertilized; developing into haploid males). Several ultimate causes of policing have been proposed, including (1) an increase in colony productivity,...... reproductive workers. We infer that relatedness incentives are the most likely ultimate cause of the evolutionary maintenance of worker-egg policing in A. echinatior. (C) 2010 The Association for the Study of Animal Behaviour. Published by Elsevier Ltd. All rights reserved...

Steels from materials science to structural engineering

CERN Document Server

Sha, Wei

2013-01-01

Steels and computer-based modelling are fast growing fields in materials science as well as structural engineering, demonstrated by the large amount of recent literature. Steels: From Materials Science to Structural Engineering combines steels research and model development, including the application of modelling techniques in steels.  The latest research includes structural engineering modelling, and novel, prototype alloy steels such as heat-resistant steel, nitride-strengthened ferritic/martensitic steel and low nickel maraging steel.  Researchers studying steels will find the topics vital to their work.  Materials experts will be able to learn about steels used in structural engineering as well as modelling and apply this increasingly important technique in their steel materials research and development. 

Microstructural characterisation and corrosion performance of old railway girder bridge steel and modern weathering structural steel

International Nuclear Information System (INIS)

Tewary, N.K.; Kundu, A.; Nandi, R.; Saha, J.K.; Ghosh, S.K.

2016-01-01

Highlights: • Microstructure and corrosion performance are compared for two structural steels. • Microstructure evolution shows primarily ferrite-pearlite in both the steels. • Steels show higher corrosion rate in 1% HCl solution than in 3.5% NaCl solution. • The corrosion products show the presence of oxide, hydroxide and oxy-hydroxides. • The corroded surface reveals morphologies like flowery, cotton balls and rosette. - Abstract: A comparison on microstructure and corrosion performance has been made between the two structural steels used in old railway girder bridge (Sample A) and modern grades of weathering structural steel (Sample B). The microstructures, viewed under optical microscope and scanning electron microscope (SEM), show mainly ferrite-pearlite phase constituents in both the steels, A and B. The phase fraction analysis shows higher amount of pearlite in steel A compared to that of steel B. The grain size of steel A is larger than that of steel B under identical processing condition. The immersion corrosion test in 3.5% NaCl shows that the corrosion rate of steel A increases with time, while the same for steel B decreases with time. On the other hand, corrosion test in 1% HCl shows that the corrosion rate of both steel A and B is higher as compared to that of NaCl which always decreases with time. The XRD analysis of corrosion products show the presence of many oxides, hydroxide and oxy-hydroxide like Lepidocrocite (γ-FeOOH), Goethite (α-FeOOH), Akaganeite (β-FeOOH), Magnetite (Fe_3O_4) and Maghemite (γ-Fe_2O_3) in both the steels. The SEM images of corroded surfaces reveal different morphologies like flowery, cotton balls and rosette etc. which indicate that the corrosion products primarily contain Lepidocrocite (γ-FeOOH), Goethite (α-FeOOH) and Akaganeite (β-FeOOH).

An Unusual Partnership: Brazilian-Italian Forms of Cooperation in the Nuclear Field (1951-1986)

International Nuclear Information System (INIS)

Patti, Carlo

2017-01-01

This chapter discusses the Brazilian-Italian cooperation in the nuclear field between the early 1950s and 1986. Since the late 1930s, Italian or Italian-Brazilian scientists promoted the development of studies in nuclear physics. Immediately after World War II, the Brazilian-Italian collaboration continued. Between the 1950s and the 1970s, Brazilian nuclear scientists studied in Italian institutions. Relying on primary sources from Brazilian archives and oral history interviews with protagonists of the Brazilian nuclear program, this chapter explore the relations between Italy and Brazil from 1951, the year of the establishment of the Brazilian nuclear program, until the 1980s. This study focuses on the bidirectional transfer of knowledge on sensitive technologies, and on the formal and informal cooperation between the two countries.

Effects of metal-rich particulate matter exposure on exogenous and endogenous viral sequence methylation in healthy steel-workers.

Science.gov (United States)

Mercorio, Roberta; Bonzini, Matteo; Angelici, Laura; Iodice, Simona; Delbue, Serena; Mariani, Jacopo; Apostoli, Pietro; Pesatori, Angela Cecilia; Bollati, Valentina

2017-11-01

Inhaled particles have been shown to produce systemic changes in DNA methylation. Global hypomethylation has been associated to viral sequence reactivation, possibly linked to the activation of pro-inflammatory pathways occurring after exposure. This observation provides a rationale to investigate viral sequence (both exogenous and endogenous) methylation in association to metal-rich particulate matter exposure. To verify this hypothesis, we chose the Wp promoter of the Epstein-Barr Virus (EBV-Wp) and the promoter of the human-endogenous-retrovirus w (HERV-w), respectively as a paradigm of an exogenous and an endogenous retroviral sequence, to be investigated by bisulfite PCR Pyrosequencing. We enrolled 63 male workers in an electric furnace steel plant, exposed to high level of metal-rich particulate matter. Comparing samples obtained in the first day of a work week (time 0-baseline, after 2 days off work) and the samples obtained after 3 days of work (time 1-post exposure), the mean methylation of EBV-Wp was significantly higher at baseline compared to post-exposure (mean baseline = 56.7%5mC; mean post-exposure = 47.9%5mC; p-value = 0.009), whereas the mean methylation of HERV-w did not significantly differ. Individual exposure to inhalable particles and metals was estimated based on measures in all working areas and time spent by the study subjects in each area. In a regression model adjusted for age, body mass index and smoking, PM and metal components had a positive association with EBV-Wp methylation (i.e. PM10: β = 5.99, p-value < 0.038; nickel: β = 17.82, p-value = 0.02; arsenic: β = 13.59, p-value < 0.015). The difference observed comparing baseline and post-exposure samples may be suggestive of a rapid change in EBV methylation induced by air particles, while correlation between EBV methylation and PM/metal exposure may represent a more stable adaptive mechanism. Future studies investigating a larger panel of viral sequences could better elucidate

Zebrafish in Brazilian Science: Scientific Production, Impact, and Collaboration.

Science.gov (United States)

Gheno, Ediane Maria; Rosemberg, Denis Broock; Souza, Diogo Onofre; Calabró, Luciana

2016-06-01

By means of scientometric indicators, this study investigated the characteristics of scientific production and research collaboration involving zebrafish (Danio rerio) in Brazilian Science indexed by the Web of Science (WoS). Citation data were collected from the WoS and data regarding Impact Factor (IF) were gathered from journals in the Journal Citation Reports. Collaboration was evaluated according to coauthorship data, creating representative nets with VOSviewer. Zebrafish has attained remarkable importance as an experimental model organism in recent years and an increase in scientific production with zebrafish is observed in Brazil and around the world. The citation impact of the worldwide scientific production is superior when compared to the Brazilian scientific production. However, the citation impact of the Brazilian scientific production is consistently increasing. Brazil does not follow the international trends with regard to publication research fields. The state of Rio Grande do Sul has the greatest number of articles and the institution with the largest number of publications is Pontifícia Universidade Católica do Rio Grande do Sul. Journals' average IF is higher in Brazilian publications with international coauthorship, and around 90% of articles are collaborative. The Brazilian institutions presenting the greatest number of collaborations are Pontifícia Universidade Católica do Rio Grande do Sul, Universidade Federal do Rio Grande do Sul, Fundação Universidade Federal de Rio Grande, and Universidade de São Paulo. These data indicate that Brazilian research using zebrafish presents a growth in terms of number of publications, citation impact, and collaborative work.

Urinary 2,5-hexanedione in workers exposed to n-hexane: influence of the sample treatment

Directory of Open Access Journals (Sweden)

Daniela Magalhães Nolasco

2007-08-01

Full Text Available The aim of the present study was to determine 2,5-hexanedione (2,5-HD, a metabolite of n-hexane, by gas chromatography/flame ionization detection in 31 workers exposed to n-hexane after two types of sample pretreatment, i.e., with (total 2,5-HD and without (free 2,5-HD acid hydrolysis. The mean urinary 2,5-HD was 0.52 mg/L (free and 2.88 mg/L (total, this difference being significant (Student t-test, p < 0.05. The differences in the results according to the sample treatment support the need to modify the current Brazilian legislation, which proposes the analysis of 2,5-HD without indicating whether it is the free or total metabolite.

Microstructural characterization in dissimilar friction stir welding between 304 stainless steel and st37 steel

International Nuclear Information System (INIS)

Jafarzadegan, M.; Feng, A.H.; Abdollah-zadeh, A.; Saeid, T.; Shen, J.; Assadi, H.

2012-01-01

In the present study, 3 mm-thick plates of 304 stainless steel and st37 steel were welded together by friction stir welding at a welding speed of 50 mm/min and tool rotational speed of 400 and 800 rpm. X-ray diffraction test was carried out to study the phases which might be formed in the welds. Metallographic examinations, and tensile and microhardness tests were used to analyze the microstructure and mechanical properties of the joint. Four different zones were found in the weld area except the base metals. In the stir zone of the 304 stainless steel, a refined grain structure with some features of dynamic recrystallization was evidenced. A thermomechanically-affected zone was characterized on the 304 steel side with features of dynamic recovery. In the other side of the stir zone, the hot deformation of the st37 steel in the austenite region produced small austenite grains and these grains transformed to fine ferrite and pearlite and some products of displacive transformations such as Widmanstatten ferrite and martensite by cooling the material after friction stir welding. The heat-affected zone in the st37 steel side showed partially and fully refined microstructures like fusion welding processes. The recrystallization in the 304 steel and the transformations in the st37 steel enhanced the hardness of the weld area and therefore, improved the tensile properties of the joint. - Highlights: ► FSW produced sound welds between st37 low carbon steel and 304 stainless steel. ► The SZ of the st37 steel contained some products of allotropic transformation. ► The material in the SZ of the 304 steel showed features of dynamic recrystallization. ► The finer microstructure in the SZ increased the hardness and tensile strength.

Brazilian foreign affairs: social capital and the democratic discourse in South America

Directory of Open Access Journals (Sweden)

Rafael Duarte Villa

2007-01-01

Full Text Available Brazilian elites as well as foreign policy-makers have long shared a common belief that the ideas of democracy and democratization should serve as some "road map" to foreign policy-making. In areas such as security, regional integration, and disarmament, the goal has been to generate a positive social capital as well as to build trusting relations with Brazilian neighbors in South America. Therefore, under the impact of ideas brought about by new world visions, Brazilian foreign policy has changed a domestic policy feature - the democratic rearrangement of the political system - into a condition and resource for foreign policy-making towards South America. The result has been a fine improvement of Brazilian image and credibility in the regional South American scenario. In other words, there has been a significant increment in "trust" towards Brazil. This argument has been developed based on extracts and transcripts from official diplomatic speeches from Brazilian foreign policy-makers as well as a historical reconstruction of Brazil's diplomatic relations with two South American countries. Our study was based on two cases: Brazilian-Venezuelan and Brazilian-Argentine relations in the 80's and the 90's.

Economic Loss to the Brazilian Regions Due to the Doha Round Failure

OpenAIRE

Pereira, Matheus Wemerson Gomes; Teixeira, Erly Cardoso; Gurgel, Angelo Costa

2009-01-01

We build a database and model to develop general equilibrium analysis of the Brazilian economy at the level of the five macro regions. The model is multiregional at global level as also at the Brazilian level. The project is coupled to the GTAP model through disaggregation of the original Brazilian input-output matrix and trade flows and follows the GTAPinGAMS structure and syntax to generate the General Equilibrium Analysis Project for the Brazilian Economy (PAEG). The regional database is t...

Comparison of the performance of concrete-filled steel tubular and hollow steel diagrid buildings

Science.gov (United States)

Peter, Minu Ann; S, Sajith A.; Nagarajan, Praveen

2018-03-01

In the recent construction scenario, diagrid structures are becoming a popular high-rise building structural system. Diagrid structures consist of diagonals in the perimeter and an interior core. The corner and interior vertical columns are not required due to the structural efficiency of diagrid structural systems. Steel and concrete are commonly used material for diagrid. An alternate material for diagrid is concrete-filled steel tube (CFST). CFST incorporates the advantages of both steel and concrete. In CFST, the inward buckling of the steel tube is effectively prevented by the filled concrete. The compressive strength of concrete increases due to the tri-axial state of stress in concrete induced by the steel tube. The longitudinal as well as lateral reinforcement to the concrete core is also provided by the steel tube. This paper compares the performance of CFST and steel diagrid buildings using linear static analysis. For this purpose, a 12 storey and 36 storey building are analysed using finite element method and CFST diagrid building is found to perform better.

Hydrogen gas embrittlement of stainless steels mainly austenitic steels. Volumes 1 and 2

International Nuclear Information System (INIS)

Azou, P.

1988-01-01

Steel behavior in regard to hydrogen is examined especially austenitic steels. Gamma steels are studied particularly the series 300 with various stabilities and gamma steels with improved elasticity limit for intermetallic phase precipitation and nitrogen additions. A two-phase structure γ + α' is also studied. All the samples are tested for mechanical behavior in gaseous hydrogen. Influence of metallurgical effects and of testing conditions on hydrogen embrittlement are evidenced. Microstructure resulting from mechanical or heat treatments, dislocation motion during plastic deformation and influence of deformation rate are studied in detail [fr

Brazilian scientific production on herbal medicines used in dentistry

Directory of Open Access Journals (Sweden)

R.D. Castro

2014-09-01

Full Text Available The objective of this study was to critically analyze the scientific production published in specialized Brazilian journals concerning the use of medicinal plants in dentistry. A literature review was carried out using an indirect documentation technique by means of a bibliographical study. Four examiners performed independent searches in Brazilian journals of medicinal plants indexed in the database SciELO (Brazilian Journal of Pharmacognosy; Brazilian Journal of Medicinal Plants; Brazilian Journal of Pharmaceutical Sciences; and Acta Botanica Brasilica using the descriptors "herbal medicine/phytotherapy" or "medicinal plants" and "dentistry ". The articles published from 2002 to 2012 addressing the use of medicinal plants in dentistry were included and analyzed. The searches based on the descriptors and reading of abstracts, resulted in 155 articles. Of these, 44 were read in full and a total of 16 publications met the eligibility criteria and were selected. Laboratory studies predominated (10 and were limited to the evaluation of antimicrobial properties by means of tests for determining inhibitory, fungicidal and bactericidal concentrations. Three literature reviews and only one clinical trial with no blinding and randomization were found. It is highlighted the need for better methodological designs in the researches and greater production of clinical or in vivo studies.

Some comments about the situation of the Steel Industry in the Arab Countries (Arab Steel Summit)

International Nuclear Information System (INIS)

Haidar, Y.; Astier, J.

2009-01-01

The Arab Steel Summit, that convened in Abu Dhabi in April, gave us another opportunity to review the situation of the Arab Iron and Steel Industry, with regard to the present World economic context. We will address: - the World situation of steel production, focusing on the Arab Countries; - the related situation of steel consumption; - the steel trade, including imports, exports and prices; - the consequences for technology and economy. (authors)

Challenges in Special Steel Making

Science.gov (United States)

Balachandran, G.

2018-02-01

Special bar quality [SBQ] is a long steel product where an assured quality is delivered by the steel mill to its customer. The bars have enhanced tolerance to higher stress application and it is demanded for specialised component making. The SBQ bars are sought for component making processing units such as closed die hot forging, hot extrusion, cold forging, machining, heat treatment, welding operations. The final component quality of the secondary processing units depends on the quality maintained at the steel maker end along with quality maintained at the fabricator end. Thus, quality control is ensured at every unit process stages. The various market segments catered to by SBQ steel segment is ever growing and is reviewed. Steel mills need adequate infrastructure and technological capability to make these higher quality steels. Some of the critical stages of processing SBQ and the critical quality maintenance parameters at the steel mill in the manufacture has been brought out.

Trends in steel technology

International Nuclear Information System (INIS)

Anon.

1980-01-01

Dual phase steels, composite products, and microalloyed steels are making inroads in the automotive industry applications for bumpers, automotive parts, bodies, mechanical parts, suspension and steering equipment and truck bumpers. New steels are also used to support solar mirrors and cells, in corrosive environments in the oil and gas industry, fusion reactors, and pressure vessels in nuclear power plants

Survey and comparison of sleep quality among fixed and changing shift staff in a steel factory in Tehran, Iran.

Science.gov (United States)

Mohammadian, Farugh; Abbasinia, Marzieh; Rahmani, Abdolrasoul; Monazzam, Mohammad Reza; Asghari, Mehdi; Ahmadnezhad, Iman; Asadi, Ali

2013-01-01

Given the hazardous nature of the work in steel factories and that the staff has to deal with hazardous equipment and machines, improper sleep quality and drowsiness among the works tackles performance and boosts rate of job accidents. This study is aimed to survey the quality of sleep and sleepiness status and the pertinent factors among the workers in a rolling mill and a steel production company in Tehran, Iran. In a Cross-Sectional study 2011, 180 workers were selected randomly from a rolling mill and a steel production company in Tehran. A questionnaire was designed to collect demographic data and variables of work condition. Pitersborg's sleep quality questionnaire was used to survey quality and problems of Participants' sleep. Epworth Sleepiness questionnaire was used to deals with sleepiness during work, studying, watching TV, or during time spent in public. Average score of sleep quality for the fixed shift staff and changing shift staff were 7.5±2.82 and 8.49±2.95 respectively. Surveys of sleep quality for the two groups of the participants based on T-test showed a significant difference between the two groups so that the changing shift staff group suffered poorer sleep quality (p=0.03). Comparison of average drowsiness scores between the two groups of participants based on Mann-Whitney test showed no significant difference (p>0.005). Chi square test showed a significant difference between severity of drowsiness and type of working shift (p =0.028 and 0.009). Staff in revolving shifts suffers poor sleep quality comparing with staff with fixed working shift. Moreover, type of working shift greatly affects severity of drowsiness as staff at different work shift experienced different level of sleepiness. It is essential to survey sleep disorder of the staff in the industry and pay more emphasis on sleep disorder epidemic in other fields of industry.

Analysis of the Behaviour of Composite Steel and Steel Fiber Reinforced Concrete Slabs

Directory of Open Access Journals (Sweden)

Mindaugas Petkevičius

2011-04-01

Full Text Available There was a pending influence of steel fiber on the strength and stiffness of composite steel–concrete slabs under statical short–time load. Steel profiled sheeting and steel fiber reinforced concrete were used for specimens. Four composite slabs were made. Experimental investigations into the behaviour and influence of steel fiber reinforced concrete in composite slabs were conducted. Transverse, longitudinal, shear deformation and deflection of the slab were measured. The results indicated that the use of steel fiber in composite slabs was effective: strength was 20–24 % higher and the meanings of deflections under the action of the bending moment were 0,6MR (where MR is the bending moment at failure of the slabs and were 16–18 % lower for slabs with usual concrete. Article in Lithuanian

Genesis of the Brazilian nuclear power plants program

International Nuclear Information System (INIS)

Syllus, G.; Lepecki, W.

1996-01-01

The genesis of the Brazilian Nuclear Power Program is described by the authors - who participated in the events - from the beginning of the sixties, until the definition and the start of the implementation in 1975 of the Reference Nuclear Power Program. A description is made of the main events, studies and decisions that contributed to the evolution of the Program: the GTRP (Nuclear Power Plant Working Group); the Thorium Group; the Lane Group; the decision about Angra 1; CNEN's analyses about the reactor line and, finally, the creation of CBTN (Nuclear Technology Brazilian Company), which elaborated the studies that resulted in the final definition of the Program and led to the Brazilian German Agreement and the establishment of NUCLEBRAS. (author)

The Brazilian Nuclear Energy Commission and the health

International Nuclear Information System (INIS)

Anon.

1987-01-01

The Program of Health Section / Brazilian Cnen, which was elaborated to promote the use of ionizing radiations (nuclear and x-ray techniques) in benefit of Brazilian health, with safety assurance of patients, personnels, population and environment, is presented. The Ministry of Health, industries, Medical and Physicist Associations, Universities and Research Centers are participants of this program. The activities involved in the program are: production of isotopes and radiopharmaceuticals; radiation detectors and nuclear instrumentation; radiation protection and dosimetry; education and training of human resources; applied research and new technologies. The guiding and actions that the section will adopt to attend the growing necessities of Brazilian society, considering technological powers, management, available substructure and associated difficulties are defined. (M.C.K.) [pt

[The Brazilian Functionality Index: perceptions of professionals and persons with disabilities in the context of Complementary Law 142/2013].

Science.gov (United States)

Pereira, Éverton Luís; Barbosa, Livia

2016-10-01

This article derives from a study conducted on the validation of the Brazilian Functionality Index (IF-BrA) applied to the granting of retirement benefits to disabled persons. The retirement of persons with disabilities is regulated by Complementary Law 142 of May 8, 2013. The aim is to discuss how the individuals involved in application of the instrument perceive the concept of disability and the possible implications for ensuring the right to retirement. Eleven agencies of the National Social Security Institute (INSS) were visited and 16 physicians, 16 social workers and 40 persons with disabilities were interviewed. The evaluation and assessment process was also observed. The results indicate that there are conceptual tensions between the perspective on disability of the professionals and the IF-BrA concepts. Social workers and physicians are challenged in their technical specialties in the application of the instrument. Persons with disabilities do not always consider themselves to be disabled in their daily lives. Disability is either presented as a political description of the body in accordance with the social model of disability, or it is described as a specific difficulty justifying the right to seek retirement.

Autonomic function in manganese alloy workers

Energy Technology Data Exchange (ETDEWEB)

Barrington, W.W.; Angle, C.R.; Willcockson, N.K.; Padula, M.A. [Univ. of Nebraska Medical Center, Omaha, NE (United States); Korn, T.

1998-07-01

The observation of orthostatic hypotension in an index case of manganese toxicity lead to this prospective attempt to evaluate cardiovascular autonomic function and cognitive and emotional neurotoxicity in eight manganese alloy welders and machinists. The subjects consisted of a convenience sample consisting of an index case of manganese dementia, his four co-workers in a frog shop for gouging, welding, and grinding repair of high manganese railway track and a convenience sample of three mild steel welders with lesser manganese exposure also referred because of cognitive or autonomic symptoms. Frog shop air manganese samples 9.6--10 years before and 1.2--3.4 years after the diagnosis of the index case exceeded 1.0 mg/m{sup 3} in 29% and 0.2 mg/m{sup 3} in 62%. Twenty-four-hour electrocardiographic (Holter) monitoring was used to determine the temporal variability of the heartrate (RR{prime} interval) and the rates of change at low frequency and high frequency. MMPI and MCMI personality assessment and short-term memory, figure copy, controlled oral word association, and symbol digit tests were used.

Ductile fracture of two-phase welds under 77K. [Steel-EhP810, steel-EhP666, steel-08Kh18N10T, steel-EhP659-VI, steel-chP810

Energy Technology Data Exchange (ETDEWEB)

Yushchenko, K.A.; Voronin, S.A.; Pustovit, A.I.; Shavel' , A.V.

The effect of the type of welding and fillers on crack resistance of welded joints high-strength steel EhP810 and its various compounds with steels EhP666, 08Kh18N10T has been studied. For the welding of steel EhP810 with steels EhP810, EhP666, 08Kh18N10T electron-beam, automatic, argon tungsten arc with non-consumable electrode with various fillers, as well as argon metal-arc welding with consumable electrode, were used. It is shown, that for a joint, made by electron-beam welding, parameters sigmasub(u), Ksub(IcJ), KCV are higher than for a joint of a similar phase structure made using filler wire EhP659-VI. It is explained by the fact, that during electron-beam welding joint metal refining takes place, which removes gases. In welded joints of chP810 steel, having joints with austenitic structure, characteristic of crack resistance Ssub(c) increases by more than 0.2 mm in contrast to two-phase joints, which conventional yield strength at 77 K exceeds 1000 MPa. It is worth mentioning, that for other classes of steels formation of two-phase structure of joint increases welded joint resistance to brittle fracture. It is possible to obtain the required structure of joint with assigned level of resistance to brittle fracture by means of the use of different fillers, optimum and welding procedure, regulating the part of the basic metal in joint content.

Implementation of internal monitoring programs for workers occupationally exposed by 131I in nuclear medicine services in Brazil

International Nuclear Information System (INIS)

Oliveira, S.M.; Dantas, A.L.A.; Dantas, B.M.

2017-01-01

In nuclear medicine services (NMS), workers routinely handle radionuclides for diagnostic and therapy. This practice represents a risk of incorporation by these radionuclides. The International Atomic Energy Agency (IAEA) recommends the implementation of an internal monitoring program on workers exposed to annual effective doses greater than 1 mSv, as for example, those who handle 131 I for therapy in NMS. Currently, in Brazil, there are not enough available laboratories qualified to provide internal monitoring services to attend all possible demand of internal monitoring if it such regulation were applied by the Brazilian Nuclear Regulatory Board (CNEN). The objective of this work is to disseminate simple and inexpensive methods for in vivo routine thyroid monitoring of 131 I using equipment available in the NMS. Devices available in two public hospitals located in the city of Rio de Janeiro were calibrated for use in occupational internal monitoring. The equipment evaluated in this work presented enough sensitivity for such application, being suitable to access intakes of 131 I in the thyroid and able to estimate doses below 1 mSv. (author)

Brazilian Portuguese transcultural adaptation of Barkley Deficits in Executive Functioning Scale (BDEFS

Directory of Open Access Journals (Sweden)

Victor Polignano Godoy

2015-12-01

Full Text Available Abstract Background Considering the importance of Executive Functions to clinical and nonclinical situations, Barkley proposed a new theory of executive functioning based on an evolutionary neuropsychological perspective and clinical research using large samples of clinical and community identified adults and children as well as children with ADHD followed to adulthood. Objective The present study aims to adapt the Barkley Deficits in Executive Functions Scales (BDEFS to Brazilian Portuguese and also assess its construct validity in a sample of normal Brazilian adults. Methods The original version of scale was adapted to Brazilian Portuguese according to the guideline from the ISPOR Task Force. To assess the semantic equivalence between the original and adapted version, both of them were applied into a sample of 25 Brazilian bilingual adults. Finally, 60 Brazilian adults completed the BDEFS and the Brazilian versions of Barratt Impulsiveness Scale (BIS-11 and Adult Self-Report Scale (ASRS-18 to assess convergent validity. Results The BDEFS Brazilian Portuguese version has semantic correspondence with the original version indicating that the adaptation procedure was successful. The BDEFS correlated significantly with the impulsivity and attention scores from the BIS-11 and ASRS-18 supporting its construct validity. Cronbach’s alpha (α = 0.961 indicated that the BDEFS translated version has satisfactory internal consistency. Discussion Together, these findings indicate the successful adaptation of the BDEFS to Brazilian Portuguese and support its utility in that population.

Brazilian Microbiome Project: revealing the unexplored microbial diversity--challenges and prospects.

Science.gov (United States)

Pylro, Victor Satler; Roesch, Luiz Fernando Wurdig; Ortega, José Miguel; do Amaral, Alexandre Morais; Tótola, Marcos Rogério; Hirsch, Penny Ruth; Rosado, Alexandre Soares; Góes-Neto, Aristóteles; da Costa da Silva, Artur Luiz; Rosa, Carlos Augusto; Morais, Daniel Kumazawa; Andreote, Fernando Dini; Duarte, Gabriela Frois; de Melo, Itamar Soares; Seldin, Lucy; Lambais, Márcio Rodrigues; Hungria, Mariangela; Peixoto, Raquel Silva; Kruger, Ricardo Henrique; Tsai, Siu Mui; Azevedo, Vasco

2014-02-01

The Brazilian Microbiome Project (BMP) aims to assemble a Brazilian Metagenomic Consortium/Database. At present, many metagenomic projects underway in Brazil are widely known. Our goal in this initiative is to co-ordinate and standardize these together with new projects to come. It is estimated that Brazil hosts approximately 20 % of the entire world's macroorganism biological diversity. It is 1 of the 17 countries that share nearly 70 % of the world's catalogued animal and plant species, and is recognized as one of the most megadiverse countries. At the end of 2012, Brazil has joined GBIF (Global Biodiversity Information Facility), as associated member, to improve the access to the Brazilian biodiversity data in a free and open way. This was an important step toward increasing international collaboration and clearly shows the commitment of the Brazilian government in directing national policies toward sustainable development. Despite its importance, the Brazilian microbial diversity is still considered to be largely unknown, and it is clear that to maintain ecosystem dynamics and to sustainably manage land use, it is crucial to understand the biological and functional diversity of the system. This is the first attempt to collect and collate information about Brazilian microbial genetic and functional diversity in a systematic and holistic manner. The success of the BMP depends on a massive collaborative effort of both the Brazilian and international scientific communities, and therefore, we invite all colleagues to participate in this project.

The Brazilian investment in science and technology

Directory of Open Access Journals (Sweden)

Pinheiro-Machado R.

2001-01-01

Full Text Available An analysis of Brazilian federal expenditures in science and technology is presented is this study. The 1990-1999 data were compiled from records provided by two federal agencies (MCT and CNPq responsible for managing most of the national budget related to these activities. The results indicate that the federal investments in Brazilian science and technology stagnated during the last decade (US$ 2.32 billion in 1990, US$ 2.39 billion in 1996, and US$ 2.36 billion in 1999. In contrast, a great increase in private investments in research was acknowledged both by industry and by the government during the same period, from US$ 2.12 to US$ 4.64 billion. However, this investment did not result in an increase in invention patents granted to residents (492 in 1990 and only 232 in 1997 or in a reduction of patent costs. Despite this unfavorable scenario, the number of graduate programs in the country has increased two-fold in the last decade and the contribution of Brazilians to the database of the Institute for Scientific Information has increased 4.7-fold from 1990 (2,725 scientific publications to 2000 (12,686 scientific publications. Unstable federal resources for science, together with the poor returns of private resources in terms of developing new technologies, may jeopardize the future of Brazilian technological development.

Methylparaben concentration in commercial Brazilian local anesthetics solutions

Directory of Open Access Journals (Sweden)

Gustavo Henrique Rodriguez da Silva

2012-08-01

Full Text Available OBJECTIVE: To detect the presence and concentration of methylparaben in cartridges of commercial Brazilian local anesthetics. MATERIAL AND METHODS: Twelve commercial brands (4 in glass and 8 in plastic cartridges of local anesthetic solutions for use in dentistry were purchased from the Brazilian market and analyzed. Different lots of the commercial brands were obtained in different Brazilian cities (Piracicaba, Campinas and São Paulo. Separation was performed using high performance liquid chromatography (HPLC with UV-Vis detector. The mobile phase used was acetonitrile:water (75:25 - v/v, pH 4.5, adjusted with acetic acid at a flow rate of 1.0 ml.min-1. RESULTS: When detected in the solutions, the methylparaben concentration ranged from 0.01% (m/v to 0.16% (m/v. One glass and all plastic cartridges presented methylparaben. CONCLUSION: 1. Methylparaben concentration varied among solutions from different manufacturers, and it was not indicated in the drug package inserts; 2. Since the presence of methylparaben in dental anesthetics is not regulated by the Brazilian National Health Surveillance Agency (ANVISA and this substance could cause allergic reactions, it is important to alert dentists about its possible presence.

Status of the implementation of Brazilian National Repository

International Nuclear Information System (INIS)

Tello, Cledola Cassia Oliveira de

2015-01-01

In Brazil, the use of nuclear energy and radioisotopes is increasing and it already justifies the construction of a national repository for radioactive wastes of low and intermediate-level. The Brazilian National Commission for Nuclear Energy (CNEN) is legally responsible for designing and constructing intermediate and final storages for radioactive wastes generated in all Country, in accordance to Federal Law No. 10308. Additionally, the Brazilian Environmental Regulator (IBAMA) lately is imposing to the implementation of new nuclear installations (e.g. Angra 3 NPP and Brazilian Multipurpose Reactor) that the National Repository should be in construction, before the start-up of those ones. In November 2009, the RBMN Project Charter was signed. The RBMN Project aims at the implantation of a National Repository to dispose the radioactive wastes of low- and intermediate-level. Some aspects about the Repository construction are very challenging, mainly due to the licensing process, which will be made for two different regulatory bodies, nuclear and environmental. The main achievements obtained till now are the establishment of the current Brazilian radioactive waste inventory, the conceptual design and the selection of candidate sites for the repository. The current status of the Project is summarized. (author)

Steel Industry Wastes.

Science.gov (United States)

Schmidtke, N. W.; Averill, D. W.

1978-01-01

Presents a literature review of wastes from steel industry, covering publications of 1976-77. This review covers: (1) coke production; (2) iron and steel production; (3) rolling operations; and (4) surface treatment. A list of 133 references is also presented. (NM)

Monitoring of occupational exposure in manufacturing of stainless steel constructions. Part I: Chromium, iron, manganese, molybdenum, nickel and vanadium in the workplace air of stainless steel welders.

Science.gov (United States)

Kucera, J; Bencko, V; Pápayová, A; Saligová, D; Tejral, J; Borská, L

2001-11-01

Exposure to workplace airborne pollutants was examined in a group of 20 workers dealing mainly with welding, polishing, drilling and assembling of stainless steel constructions. Airborne particulate matter (APM) collected using both personal and stationary samplers was analyzed by instrumental neutron activation analysis (INAA). Quality assurance procedures of both sampling and analytical stages are described. Of the elements determined, results are presented for chromium, iron, manganese, molybdenum, nickel and vanadium. The median values of element concentrations exceeded the maximum admissible limits for workplace pollutants only for chromium, while for nickel the limit was exceeded in several individual cases. Sampling of hair, nails, blood, urine and saliva to be used for biological monitoring of the exposed and control groups is also described.

Study of API 5L X70 steel corrosion processes when in contact with some Brazilian soils; Estudo dos processos de corrosao de acos API 5L X70 em contato com alguns dos solos do Brasil

Energy Technology Data Exchange (ETDEWEB)

Jesus, Sergio Luis de

2007-07-01

Pipelines, fuel storage tanks and other metallic structures are in permanent contact and exposed to different types of soils, of horizons or layers, or of soil aggressiveness. This interaction may cause expressive damages to the environment and to the planned work. Contamination may occur due to leakage of stored products, splitting during transportation, accidents caused by pipelines without extensive maintenance. The result of these accidents could be, among others, some financial losses. In order to recognize the dynamic interactions between metallic surfaces and the environment it is crucial to have preventive actions and to develop better-applied materials. API steel 5L X70 has been used in structures of low and high pressure with high mechanical strength and corrosion and, even so, it is susceptible to etching corrosion since it is in contact with different environments from mangrove regions to industrial environments. The present case evaluated the role of 5L X70 API steel in contact with different soil horizons representative of the Brazilian soil. This investigation correlated chemical species with solute ions in soil solution, secondary and primary phase minerals besides physical and chemical characteristics as pH, electric conductivity, total dissolved solids, among others, to the results of corrosion resistance and ways of corrosion. The evaluation was carried out using x-ray diffractometry, scanning electron microscopy, total reflection x-ray fluorescence, fuel injection flow besides texture and gravimetric analyses to soil characterization and mineralogy, identification of corrosion products, soil solution analyses, evaluation of tested materials and classification of ways and types of corrosion. This was an attempt to integrate the data to a better understanding of the process involving reagents and products. The results showed that different soil horizons such as different types of analyzed soils produce specific etching in metallic structures

Brazilian guidelines on prevention of cardiovascular disease in patients with diabetes: a position statement from the Brazilian Diabetes Society (SBD), the Brazilian Cardiology Society (SBC) and the Brazilian Endocrinology and Metabolism Society (SBEM).

Science.gov (United States)

Bertoluci, Marcello Casaccia; Moreira, Rodrigo Oliveira; Faludi, André; Izar, Maria Cristina; Schaan, Beatriz D; Valerio, Cynthia Melissa; Bertolami, Marcelo Chiara; Chacra, Ana Paula; Malachias, Marcus Vinicius Bolivar; Vencio, Sérgio; Saraiva, José Francisco Kerr; Betti, Roberto; Turatti, Luiz; Fonseca, Francisco Antonio Helfenstein; Bianco, Henrique Tria; Sulzbach, Marta; Bertolami, Adriana; Salles, João Eduardo Nunes; Hohl, Alexandre; Trujilho, Fábio; Lima, Eduardo Gomes; Miname, Marcio Hiroshi; Zanella, Maria Teresa; Lamounier, Rodrigo; Sá, João Roberto; Amodeo, Celso; Pires, Antonio Carlos; Santos, Raul D

2017-01-01

Since the first position statement on diabetes and cardiovascular prevention published in 2014 by the Brazilian Diabetes Society, the current view on primary and secondary prevention in diabetes has evolved as a result of new approaches on cardiovascular risk stratification, new cholesterol lowering drugs, and new anti-hyperglycemic drugs. Importantly, a pattern of risk heterogeneity has emerged, showing that not all diabetic patients are at high or very high risk. In fact, most younger patients who have no overt cardiovascular risk factors may be more adequately classified as being at intermediate or even low cardiovascular risk. Thus, there is a need for cardiovascular risk stratification in patients with diabetes. The present panel reviews the best current evidence and proposes a practical risk-based approach on treatment for patients with diabetes. The Brazilian Diabetes Society, the Brazilian Society of Cardiology, and the Brazilian Endocrinology and Metabolism Society gathered to form an expert panel including 28 cardiologists and endocrinologists to review the best available evidence and to draft up-to-date an evidence-based guideline with practical recommendations for risk stratification and prevention of cardiovascular disease in diabetes. The guideline includes 59 recommendations covering: (1) the impact of new anti-hyperglycemic drugs and new lipid lowering drugs on cardiovascular risk; (2) a guide to statin use, including new definitions of LDL-cholesterol and in non-HDL-cholesterol targets; (3) evaluation of silent myocardial ischemia and subclinical atherosclerosis in patients with diabetes; (4) hypertension treatment; and (5) the use of antiplatelet therapy. Diabetes is a heterogeneous disease. Although cardiovascular risk is increased in most patients, those without risk factors or evidence of sub-clinical atherosclerosis are at a lower risk. Optimal management must rely on an approach that will cover both cardiovascular disease prevention in

Brazilian research on extremophiles in the context of astrobiology

Science.gov (United States)

Duarte, Rubens T. D.; Nóbrega, Felipe; Nakayama, Cristina R.; Pellizari, Vivian H.

2012-10-01

Extremophiles are organisms adapted to grow at extreme ranges of environmental variables, such as high or low temperatures, acid or alkaline medium, high salt concentration, high pressures and so forth. Most extremophiles are micro-organisms that belong to the Archaea and Bacteria domains, and are widely spread across the world, which include the polar regions, volcanoes, deserts, deep oceanic sediments, hydrothermal vents, hypersaline lakes, acid and alkaline water bodies, and other extreme environments considered hostile to human life. Despite the tropical climate, Brazil has a wide range of ecosystems which include some permanent or seasonally extreme environments. For example, the Cerrado is a biome with very low soil pH with high Al+3 concentration, the mangroves in the Brazilian coast are anaerobic and saline, Pantanal has thousands of alkaline-saline lakes, the Caatinga arid and hot soils and the deep sea sediments in the Brazilian ocean shelf. These environments harbour extremophilic organisms that, coupled with the high natural biodiversity in Brazil, could be explored for different purposes. However, only a few projects in Brazil intended to study the extremophiles. In the frame of astrobiology, for example, these organisms could provide important models for defining the limits of life and hypothesize about life outside Earth. Brazilian microbiologists have, however, studied the extremophilic micro-organisms inhabiting non-Brazilian environments, such as the Antarctic continent. The experience and previous results obtained from the Brazilian Antarctic Program (PROANTAR) provide important results that are directly related to astrobiology. This article is a brief synopsis of the Brazilian experience in researching extremophiles, indicating the most important results related to astrobiology and some future perspectives in this area.

Fatigue damage of steel components

DEFF Research Database (Denmark)

Fæster, Søren; Zhang, Xiaodan; Huang, Xiaoxu

2014-01-01

Railway rails and the inner ring in roller bearings in wind turbines are both experiencing steel-to-steel contact in small areas with huge loads resulting in extremely high stresses in the base materials......Railway rails and the inner ring in roller bearings in wind turbines are both experiencing steel-to-steel contact in small areas with huge loads resulting in extremely high stresses in the base materials...

Corrosion of mild steel and stainless steel by marine Vibrio sp.

Digital Repository Service at National Institute of Oceanography (India)

PrabhaDevi; Wagh, A.B.

Microbially induced corrosion (MIC) of stainless steel and mild steel coupons exposed to media with and without a bacterial culture Vibrio sp. was studied using Scanning Electron Microscope (SEM). Pitting type of corrosion was noticed which was more...

The Study for Recycling NORM - Contaminated Steel Scraps from Steel Industry

International Nuclear Information System (INIS)

Tsai, K. F.; Lee, Y. S.; Chao, H. E.

2003-01-01

Since 1994, most of the major steel industries in Taiwan have installed portal monitor to detect the abnormal radiation in metal scrap feed. As a result, the discovery of NORM (Naturally Occurring Radioactive Material) has increased in recent years. In order to save the natural resources and promote radiation protection, an experimental melting process for the NORM contaminated steel scraps was carried out by the Institute of Nuclear Energy Research (INER) Taiwan, ROC. The experimental melting process has a pretreatment step that includes a series of cutting and removal of scales, sludge, as well as combustible and volatile materials on/in the steel scraps. After pretreatment the surface of the steel scraps are relatively clean. Then the scraps are melted by a pilot-type induction furnace. This experiment finally produced seven ingots with a total weight of 2,849 kg and 96.8% recovery. All of the surface dose rates are of the background values. The activity concentrations of these ingots are also below the regulatory criteria. Thus, these NORM-bearing steel scraps are ready for recycling. This study has been granted by the regulatory authority

Steel: Price and Policy Issues

National Research Council Canada - National Science Library

Cooney, Stephen

2006-01-01

Steel prices remain at historically elevated levels. The rapid growth of steel production and demand in China is widely considered as a major cause of the increases in both steel prices and the prices of steelmaking inputs...

Effectiveness of business strategies in Brazilian textile industry

OpenAIRE

Batista, Paulo César de Sousa; Lisboa, João Veríssimo de Oliveira; Augusto, Mário Gomes; Almeida, Fátima Evaneide Barbosa de

2016-01-01

ABSTRACT This research analyses how the interaction between strategy capabilities, strategy types, strategy formulation quality and implementation capability affect organizational performance in Brazilian textiles companies. This article proposes and tests a conceptual framework, using a structural equation modeling of a set of 211 valid questionnaires on Brazilian textiles firms. The results support links between focus strategy and marketing capabilities, and between cost leadership strategy...

Luso-Brazilian Enlightenment and the circulation of Caribbean slavery-related knowledge: the establishment of the Brazilian coffee culture from a comparative perspective.

Science.gov (United States)

Marquese, Rafael de Bivar

2009-01-01

The generation of enlightened Luso-Brazilians saw Caribbean slavery agriculture as the model to be emulated in Portuguese America. To do so, at the turn of the eighteenth to the nineteenth centuries, they translated and published some texts originally elaborated in the Antilles. In this reformist environment, the coffee culture occupied a place of prominence. To understand the role of this knowledge in establishing the Brazilian coffee culture, the Brazilian case is compared with the Cuban. The intent is to demonstrate that in the Spanish colony, the productive coffee plan of Santo Domingo was implanted, while in Brazil a plan was created, supported by new standards of agricultural management that were founded on local knowledge.

In situ 3D monitoring of corrosion on carbon steel and ferritic stainless steel embedded in cement paste

International Nuclear Information System (INIS)

Itty, Pierre-Adrien; Serdar, Marijana; Meral, Cagla; Parkinson, Dula; MacDowell, Alastair A.; Bjegović, Dubravka; Monteiro, Paulo J.M.

2014-01-01

Highlights: • The morphology of the corrosion of steel in cement paste was studied in situ. • During galvanostatic corrosion, carbon steel reinforcement corroded homogeneously. • On ferritic stainless steel, deep corrosion pits formed and caused wider cracks. • The measured rate of steel loss correlated well with Faraday’s law of electrolysis. - Abstract: In a X-ray microcomputed tomography study, active corrosion was induced by galvanostatically corroding steel embedded in cement paste. The results give insight into corrosion product build up, crack formation, leaching of products into the cracks and voids, and differences in morphology of corrosion attack in the case of carbon steel or stainless steel reinforcement. Carbon steel was homogeneously etched away with a homogeneous layer of corrosion products forming at the steel/cement paste interface. For ferritic stainless steel, pits were forming, concentrating the corrosion products locally, which led to more extensive damage on the cement paste cover

Fracture Mechanisms in Steel Castings

Directory of Open Access Journals (Sweden)

Stradomski Z.

2013-09-01

Full Text Available The investigations were inspired with the problem of cracking of steel castings during the production process. A single mechanism of decohesion - the intergranular one - occurs in the case of hot cracking, while a variety of structural factors is decisive for hot cracking initiation, depending on chemical composition of the cast steel. The low-carbon and low-alloyed steel castings crack due to the presence of the type II sulphides, the cause of cracking of the high-carbon tool cast steels is the net of secondary cementite and/or ledeburite precipitated along the boundaries of solidified grains. Also the brittle phosphor and carbide eutectics precipitated in the final stage solidification are responsible for cracking of castings made of Hadfield steel. The examination of mechanical properties at 1050°C revealed low or very low strength of high-carbon cast steels.

On choice of tempered steels

International Nuclear Information System (INIS)

Govorov, A.A.; Pan'shin, I.F.; Rakhmanov, V.I.

1978-01-01

For the purpose of developing a graphical method for choosing structural steels, a change in the propagation work of a crack and in the critical temperature of brittleness of 40, 40Kh, 40KhN, and 40KhNM steels, was examined depending on the hardness after hardening and tempering. A diagram enabling to choose the grade of steel for making an article of known dimensions according to the preset values of its mechanical properties has been plotted. The developed selection scheme takes into account the hardenability of steels and the influence of the hardness after thermal treatment on the cold-shortness of steel

Volatilization from PCA steel alloy

Energy Technology Data Exchange (ETDEWEB)

Hagrman, D.L.; Smolik, G.R.; McCarthy, K.A.; Petti, D.A.

1996-08-01

The mobilizations of key components from Primary Candidate Alloy (PCA) steel alloy have been measured with laboratory-scale experiments. The experiments indicate most of the mobilization from PCA steel is due to oxide formation and spalling but that the spalled particles are large enough to settle rapidly. Based on the experiments, models for the volatization of iron, manganese, and cobalt from PCA steel in steam and molybdenum from PCA steel in air have been derived.

Cited Brazilian papers in general surgery between 1970 and 2009

Directory of Open Access Journals (Sweden)

Flavio L. Heldwein

2010-01-01

Full Text Available OBJECTIVES: To identify the most cited articles in general surgery published by Brazilian authors. INTRODUCTION: There are several ways for the international community to recognize the quality of a scientific article. Although controversial, the most widely used and reliable methodology to identify the importance of an article is citation analysis. METHODS: A search using the Institute for Scientific Information citation database (Science Citation Index Expanded was performed to identify highly cited Brazilian papers published in twenty-six highly cited general surgery journals, selected based on their elevated impact factors, from 1970 to 2009. Further analysis was done on the 65 most-cited papers. RESULTS: We identified 1,713 Brazilian articles, from which nine papers emerged as classics (more than 100 citations received. For the Brazilian contributions, a total increase of about 21-fold was evident between 1970 and 2009. Although several topics were covered, articles covering trauma, oncology and organ transplantation were the most cited. The majority of classic studies were done with international cooperation. CONCLUSIONS: This study identified the most influential Brazilian articles published in internationally renowned general surgery journals.

Risk of lung cancer according to mild steel and stainless steel welding

DEFF Research Database (Denmark)

Sørensen, Anita Rath; Thulstrup, Ane Marie; Hansen, Johnni

2007-01-01

OBJECTIVES: Whether the elevated risk of lung cancer observed among welders is caused by welding emissions or by confounding from smoking or asbestos exposure is still not resolved. This question was addressed in a cohort with a long follow-up and quantified estimates of individual exposure.......06-1.70)]. Among the stainless steel welders, the risk increased significantly with increasing accumulative welding particulate exposure, while no exposure-response relation was found for mild steel welders, even after adjustment for tobacco smoking and asbestos exposure. CONCLUSIONS: The study corroborates...... earlier findings that welders have an increased risk of lung cancer. While exposure-response relations indicate carcinogenic effects related to stainless steel welding, it is still unresolved whether the mild steel welding process carries a carcinogenic risk....

Energetic transition in the electric sector: Brazilian case

International Nuclear Information System (INIS)

Jannuzzi, Gilberto de Martino

1999-01-01

The Brazilian electric sector is essentially based on a source of renewable energy -hydroelectricity, and the national economy has increased its dependence of the electricity. The use of the electricity for unit of GDP increased in continuous form from 1970 and the country has serious difficulties in the financing of the expansion of the electric production. Energetic politics, in what concerns to the sustainable development in the Brazilian case, should direct its efforts toward a bigger investment in efficiency and energy conservation. a bigger use of supply options that they are renewable and decentralized will depend on high degree of the regulation of the electric sector during the privatization. The transition stage of the Brazilian electric sector will imply more efforts toward a handling based on the demand and a bigger efficiency

Preventive actions taken by workers after workers' health surveillance: a controlled trial.

Science.gov (United States)

Boschman, J S; Van der Molen, H F; Frings-Dresen, M H W; Sluiter, J K

2013-12-01

To evaluate construction workers' preventive actions and occupational physician's (OPs) recommendations after a job-specific workers' health surveillance (WHS) compared with the currently used generic WHS. After the WHS, the OPs' written recommendations were captured. At the 3-month follow-up, the workers were asked about the preventive actions they had undertaken. A generalized linear mixed model was used to compare proportions of workers. At follow-up, the proportion of workers who reported taking preventive actions was significantly higher in the intervention group (80%, 44/55) than in the control group (67%, 80 of 121), (P = 0.04). In the intervention group, the OPs provided a higher proportion of workers with written recommendations (82%, 63 of 77, vs 57%, 69 of 121; P = 0.03). The job-specific WHS aided OPs in providing workers with recommendations and workers in undertaking (job-specific) preventive actions.

Review on Cold-Formed Steel Connections

Science.gov (United States)

Tan, Cher Siang; Mohammad, Shahrin; Md Tahir, Mahmood; Shek, Poi Ngian

2014-01-01

The concept of cold-formed light steel framing construction has been widespread after understanding its structural characteristics with massive research works over the years. Connection serves as one of the important elements for light steel framing in order to achieve its structural stability. Compared to hot-rolled steel sections, cold-formed steel connections perform dissimilarity due to the thin-walled behaviour. This paper aims to review current researches on cold-formed steel connections, particularly for screw connections, storage rack connections, welded connections, and bolted connections. The performance of these connections in the design of cold-formed steel structures is discussed. PMID:24688448

Radiation embrittlement of WWER 440 pressure vessel steel and of some improved steels by western producers

International Nuclear Information System (INIS)

Koutsky, J.; Vacek, M.; Stoces, B.; Pav, T.; Otruba, J.; Novosad, P.; Brumovsky, M.

1982-01-01

The resistance was studied of Cr-Mo-V type steel 15Kh2MFA to radiation embrittlement at an irradiation temperature of around 288 degC. Studied was the steel used for the manufacture of the pressure vessel of the Paks nuclear reactor in Hungary. The obtained results of radiation embrittlement and hardening of steel 15Kh2MFA were compared with similar values of Mn-Ni-Mo type steels A 533-B and A 508 manufactured by leading western manufacturers within the international research programme coordinated by the IAEA. It was found that the resistance of steel 15Kh2MFA to radiation embrittlement is comparable with steels A 533-B and A 508 by western manufacturers. (author)

An Optimality-Theoretic Analysis of Codas in Brazilian Portuguese

Science.gov (United States)

Goodin-Mayeda, C. Elizabeth

2015-01-01

Brazilian Portuguese allows only /s, N, l, r/ syllable finally, and of these, only /s/ is realized faithfully (as well as /r/ for some speakers). In order to avoid unacceptable codas, dialects of Brazilian Portuguese employ such strategies as epenthesis, nasal absorption, debucalization, and gliding. The current analysis argues that codas in…

A comparison of the iraddiated tensile properties of a high-manganese austenitic steel and type 316 stainless steel

International Nuclear Information System (INIS)

Klueh, R.L.; Grossbeck, M.L.

1984-01-01

The USSR steel EP-838 is a high-manganese, low-nickel steel that also has lower chromium and molybdenum than type 316 stainless steel. Tensile specimens of 20%-cold-worked EP-838 and type 316 stainless steel were irradiated in the High Flux Isotope Reactor (HFIR) at the coolant temperature (approx.=50 0 C). A displacement damage level of 5.2 dpa was reached for the EP-838 and up to 9.5 dpa for the type 316 stainless steel. Tensile tests at room temperature and 300 0 C on the two steels indicated that the irradiation led to increased strength and decreased ductility compared to the unirradiated steels. Although the 0.2% yield stress of the type 316 stainless steel in the unirradiated condition was greater than that for the EP-838, after irradiation there was essentially no difference between the strength or ductility of the two steels. The results indicate that the replacement of the majority of the nickel by manganese and a reduction of chromium and molybdenum in an austenitic stainless steel of composition near that for type 316 stainless steel has little effect on the irradiated and unirradiated tensile properties at low temperatures. (orig.)

Ductility of high chromium stainless steels

International Nuclear Information System (INIS)

Peretyat'ko, V.N.; Kazantsev, A.A.

1997-01-01

Aimed to optimize the hot working conditions for high chromium stainless steels the experiments were carried in the temperature range of 800-1300 deg C using hot torsion tests and cylindrical specimens of ferritic and ferritic-martensitic steels 08Kh13, 12Kh13, 20Kh13, 30Kh13 and 40Kh13. Testing results showed that steel plasticity varies in a wide range depending on carbon content. Steels of lesser carbon concentration (08Kh13 and 12Kh13) exhibit a sharp increase in plasticity with a temperature rise, especially in the interval of 1200-1250 deg C. Steels 20Kh13 and 30Kh13 display insignificant plasticity increasing, whereas plastic properties of steel 40Kh13 increase noticeably in the range of 1000-1300 deg C. It is shown that optimal hot working conditions for specific steel must be selected with account of steel phase composition at high temperatures

Steels for nuclear power. I

International Nuclear Information System (INIS)

Bohusova, O.; Brumovsky, M.; Cukr, B.; Hatle, Z.; Protiva, K.; Stefec, R.; Urban, A.; Zidek, M.

1976-01-01

The principles are listed of nuclear reactor operation and the reactors are classified by neutron energy, fuel and moderator designs, purpose and type of moderator. The trend and the development of light-water reactor applications are described. The fundamental operating parameters of the WWER type reactors are indicated. The effect is discussed of neutron radiation on reactor structural materials. The characteristics are described of steel corrosion due to the contact of the steel with steam or sodium in the primary coolant circuit. The reasons for stress corrosion are given and the effects of radiation on corrosion are listed. The requirements and criteria are given for the choice of low-alloy steel for the manufacture of pressure vessels, volume compensators, steam generators, cooling conduits and containment. A survey is given of most frequently used steels for pressure vessels and of the mechanical and structural properties thereof. The basic requirements for the properties of steel used in the primary coolant circuit are as follows: sufficient strength in operating temperature, toughness, good weldability, resistance to corrosion and low brittleness following neutron irradiation. The materials are listed used for the components of light-water and breeder reactors. The production of corrosion-resistant steels is discussed with a view to raw materials, technology, steel-making processes, melting processes, induction furnace steel-making, and to selected special problems of the chemical composition of steels. The effects are mainly discussed of lead, bismuth and tin as well as of some other elements on hot working of high-alloy steels and on their structure. The problems of corrosion-resistant steel welding and of pressure vessel cladding are summed up. Also discussed is the question of the concept and safeguards of the safety of nuclear installation operation and a list is presented of most commonly used nondestructive materials testing methods. The current

Recommendations on the use of biosimilars by the Brazilian Society of Rheumatology, Brazilian Society of Dermatology, Brazilian Federation of Gastroenterology and Brazilian Study Group on Inflammatory Bowel Disease--Focus on clinical evaluation of monoclonal antibodies and fusion proteins used in the treatment of autoimmune diseases.

Science.gov (United States)

Azevedo, Valderílio Feijó; Meirelles, Eduardo de Souza; Kochen, Jussara de Almeida Lima; Medeiros, Ana Cristina; Miszputen, Sender J; Teixeira, Fábio Vieira; Damião, Adérson Osmar Mourão Cintra; Kotze, Paulo Gustavo; Romiti, Ricardo; Arnone, Marcelo; Magalhães, Renata Ferreira; Maia, Cláudia Pires Amaral; de Carvalho, André Vicente E

2015-09-01

The Brazilian Societies of Rheumatology (SBR) and Dermatology (SBD), the Brazilian Federation of Gastroenterology (FBG) and the Brazilian Study Group on Inflammatory Bowel Disease (GEDIIB) gathered a group of their respective specialists on the topic of interest to discuss the most relevant issues regarding the clinical use of biosimilar medicines in Brazil. The main aim of that meeting was to prepare a document with recommendations to guide medical specialists and to help the national regulatory and policy-making agencies as concerns the authorization for marketing biosimilars used in autoimmune diseases, such as rheumatoid arthritis, ankylosing spondylitis, psoriatic arthritis, Crohn's disease, juvenile idiopathic arthritis and ulcerative colitis. In addition to considerations on the typical differences between innovator medicines and biosimilars, the specialists established a set of seven recommendations on regulatory advances related to clinical studies, indication extrapolation, nomenclature, interchangeability, automatic substitution and pharmacovigilance. Copyright © 2015 Elsevier B.V. All rights reserved.

Resistance Stories of African-Brazilian Women

Directory of Open Access Journals (Sweden)

Stela Nazareth Meneghel

2005-01-01

Full Text Available This study consists of an intervention using narrative workshops as a device to stimulate the empowerment of women. Ten women, victims of gender violence, took part in a workshop developed by non-governmental organization for African-Brazilian women Maria Mulher, which gives assistance to women living in Vila Cruzeiro do Sul, in the city of Porto Alegre. The main objective of the research was to debate questions related to gender and violence, making use of stories and histories related to the feminine, specifically African-Brazilian stories. Five meetings were held, where the women told and were told stories, took part in group discussions, experiences and rituals. The workshops gave those women a space where they could tell and hear stories, take part in the rituals of the orixás [African-Brazilian deities] of the black culture and tell their personal histories using those experiences. This intervention was an attempt at invoking different subjective experiences, and made it possible to empower the women who took part in the research, contributing for the rescue of the individual and collective memory of this group.

Association of genetic variants with self-assessed color categories in Brazilians.

Directory of Open Access Journals (Sweden)

Danielle Fernandes Durso

Full Text Available The Brazilian population was formed by extensive admixture of three different ancestral roots: Amerindians, Europeans and Africans. Our previous work has shown that at an individual level, ancestry, as estimated using molecular markers, was a poor predictor of color in Brazilians. We now investigate if SNPs known to be associated with human skin pigmentation can be used to predict color in Brazilians. For that, we studied the association of fifteen SNPs, previously known to be linked with skin color, in 243 unrelated Brazilian individuals self-identified as White, Browns or Blacks from Rio de Janeiro and 212 unrelated Brazilian individuals self-identified as White or Blacks from São Paulo. The significance of association of SNP genotypes with self-assessed color was evaluated using partial regression analysis. After controlling for ancestry estimates as covariates, only four SNPs remained significantly associated with skin pigmentation: rs1426654 and rs2555364 within SLC24A5, rs16891982 at SLC45A2 and rs1042602 at TYR. These loci are known to be involved in melanin synthesis or transport of melanosomes. We found that neither genotypes of these SNPs, nor their combination with biogeographical ancestry in principal component analysis, could predict self-assessed color in Brazilians at an individual level. However, significant correlations did emerge at group level, demonstrating that even though elements other than skin, eye and hair pigmentation do influence self-assessed color in Brazilians, the sociological act of self-classification is still substantially dependent of genotype at these four SNPs.

Effectiveness of a Mindfulness-Based Intervention in the Management of Musculoskeletal Pain in Nursing Workers.

Science.gov (United States)

Lopes, Shirlene Aparecida; Vannucchi, Bruna Pesce; Demarzo, Marcelo; Cunha, Ângelo Geraldo José; Nunes, Maria do Patrocínio Tenório

2018-05-17

Chronic pain is a prevalent disorder in nursing workers worldwide. Several studies have proposed measures to mitigate this critical scenario. Mindfulness-based interventions (MBI) have been found to have promising results in the treatment of this disorder. To quantify the effectiveness of an adapted mindfulness program (AMP) in the management of musculoskeletal pain (MSP) in nursing technicians of a Brazilian university hospital. This study was a clinical, prospective, open, repeated measures trial, with data collection between January and July 2015. Brazilian university hospital. Participants/Subjects: Sixty-four female nursing technicians with a mean age of 47.01 years (standard deviation = 9.50) with chronic pain symptoms. Sixty-four female nursing technicians with a mean age of 47.01 years (standard deviation = 9.50) and MSP participated in this prospective study. Before the intervention (T0), scores of anxiety, depression, mindfulness, musculoskeletal complaints, pain catastrophizing, self-compassion, and perception of quality of life were quantified. These scores were reevaluated after 8 weeks (T1) and 12 weeks (T2) of weekly AMP sessions (60 minutes each). The variables were evaluated by analysis of variance for repeated measures, followed by the Bonferroni test. AMP reduced the scores of musculoskeletal symptoms, anxiety, depression, and pain catastrophizing (p < .001). A significant increase was identified in self-compassion scores and perception of quality of life in the physical, psychological, and overall assessment (p ≤ .04). Positive effects of AMP occurred at T1 and remained unchanged at T2. AMP contributed to a reduction in painful symptoms and improved the quality of life of nursing workers, with a lasting effect until the 20th week of follow-up, indicating utility as an effective strategy for the management of MSP in the group studied. Copyright © 2018 American Society for Pain Management Nursing. Published by Elsevier Inc. All rights

Radiological Worker Training: Radiological Worker 2 study guides

International Nuclear Information System (INIS)

1992-10-01

Upon completion of this training course, the participant will have the knowledge to work safely in areas controlled for radiological purposes using proper radiological practices. Radiological Worker H Training, for the worker whose job assignment involves entry into Radiological Buffer Areas and all types of Radiation Contamination and Airborne Radioactivity Areas. This course is designed to prepare the worker to work safely in and around radiological areas and present methods to use to ensure individual radiation exposure is maintained As Low As Reasonably Achievable

Locative inversion and agreement syntax in Brazilian Portuguese

Directory of Open Access Journals (Sweden)

Juanito Ornelas de Avelar

2009-12-01

Full Text Available Adopting the Minimalist Program framework (CHOMSKY 2000, 2001, this paper suggests that, in Brazilian Portuguese, sentences with a locative prepositional phrase in preverbal position can be characterized as instances of locative inversion in which prepositional constituents occupy the grammatical subject position. It will be proposed that particularities involving the patterns of locative inversion in Brazilian Portuguese derive from properties of the subject-verb agreement in this language.

Brazilian franchisor: Entry and operation of internationalized franchise

OpenAIRE

Aguiar, Helder de Souza; Luppe, Marcos Roberto; Nascimento, Paulo Tromboni de Souza

2017-01-01

This study aimed to compare the entry and operations strategies of franchisors of developed countries into foreign countries with Brazilian counterparts. Were there significant differences? An exploratory study was conducted with 16 international franchisors operating in Brazil and 31 Brazilian franchisors operating abroad. The results show that international franchisors operating abroad prefer to use a subsidiary in the destination country. At the same time, this strategy is little used by B...

The Brazilian Portuguese Lexicon: An Instrument for Psycholinguistic Research

Science.gov (United States)

Estivalet, Gustavo L.; Meunier, Fanny

2015-01-01

In this article, we present the Brazilian Portuguese Lexicon, a new word-based corpus for psycholinguistic and computational linguistic research in Brazilian Portuguese. We describe the corpus development, the specific characteristics on the internet site and database for user access. We also perform distributional analyses of the corpus and comparisons to other current databases. Our main objective was to provide a large, reliable, and useful word-based corpus with a dynamic, easy-to-use, and intuitive interface with free internet access for word and word-criteria searches. We used the Núcleo Interinstitucional de Linguística Computacional’s corpus as the basic data source and developed the Brazilian Portuguese Lexicon by deriving and adding metalinguistic and psycholinguistic information about Brazilian Portuguese words. We obtained a final corpus with more than 30 million word tokens, 215 thousand word types and 25 categories of information about each word. This corpus was made available on the internet via a free-access site with two search engines: a simple search and a complex search. The simple engine basically searches for a list of words, while the complex engine accepts all types of criteria in the corpus categories. The output result presents all entries found in the corpus with the criteria specified in the input search and can be downloaded as a.csv file. We created a module in the results that delivers basic statistics about each search. The Brazilian Portuguese Lexicon also provides a pseudoword engine and specific tools for linguistic and statistical analysis. Therefore, the Brazilian Portuguese Lexicon is a convenient instrument for stimulus search, selection, control, and manipulation in psycholinguistic experiments, as also it is a powerful database for computational linguistics research and language modeling related to lexicon distribution, functioning, and behavior. PMID:26630138

The Brazilian Portuguese Lexicon: An Instrument for Psycholinguistic Research.

Science.gov (United States)

Estivalet, Gustavo L; Meunier, Fanny

2015-01-01

In this article, we present the Brazilian Portuguese Lexicon, a new word-based corpus for psycholinguistic and computational linguistic research in Brazilian Portuguese. We describe the corpus development, the specific characteristics on the internet site and database for user access. We also perform distributional analyses of the corpus and comparisons to other current databases. Our main objective was to provide a large, reliable, and useful word-based corpus with a dynamic, easy-to-use, and intuitive interface with free internet access for word and word-criteria searches. We used the Núcleo Interinstitucional de Linguística Computacional's corpus as the basic data source and developed the Brazilian Portuguese Lexicon by deriving and adding metalinguistic and psycholinguistic information about Brazilian Portuguese words. We obtained a final corpus with more than 30 million word tokens, 215 thousand word types and 25 categories of information about each word. This corpus was made available on the internet via a free-access site with two search engines: a simple search and a complex search. The simple engine basically searches for a list of words, while the complex engine accepts all types of criteria in the corpus categories. The output result presents all entries found in the corpus with the criteria specified in the input search and can be downloaded as a.csv file. We created a module in the results that delivers basic statistics about each search. The Brazilian Portuguese Lexicon also provides a pseudoword engine and specific tools for linguistic and statistical analysis. Therefore, the Brazilian Portuguese Lexicon is a convenient instrument for stimulus search, selection, control, and manipulation in psycholinguistic experiments, as also it is a powerful database for computational linguistics research and language modeling related to lexicon distribution, functioning, and behavior.

The industrial ecology of steel

Energy Technology Data Exchange (ETDEWEB)

Considine, Timothy J.; Jablonowski, Christopher; Considine, Donita M.M.; Rao, Prasad G.

2001-03-26

This study performs an integrated assessment of new technology adoption in the steel industry. New coke, iron, and steel production technologies are discussed, and their economic and environmental characteristics are compared. Based upon detailed plant level data on cost and physical input-output relations by process, this study develops a simple mathematical optimization model of steel process choice. This model is then expanded to a life cycle context, accounting for environmental emissions generated during the production and transportation of energy and material inputs into steelmaking. This life-cycle optimization model provides a basis for evaluating the environmental impacts of existing and new iron and steel technologies. Five different plant configurations are examined, from conventional integrated steel production to completely scrap-based operations. Two cost criteria are used to evaluate technology choice: private and social cost, with the latter including the environmental damages associated with emissions. While scrap-based technologies clearly generate lower emissions in mass terms, their emissions of sulfur dioxide and nitrogen oxides are significantly higher. Using conventional damage cost estimates reported in the literature suggests that the social costs associated with scrap-based steel production are slightly higher than with integrated steel production. This suggests that adopting a life-cycle viewpoint can substantially affect environmental assessment of new technologies. Finally, this study also examines the impacts of carbon taxes on steel production costs and technology choice.

Plasticity of illusory vowel perception in Brazilian-Japanese bilinguals.

Science.gov (United States)

Parlato-Oliveira, Erika; Christophe, Anne; Hirose, Yuki; Dupoux, Emmanuel

2010-06-01

Previous research shows that monolingual Japanese and Brazilian Portuguese listeners perceive illusory vowels (/u/ and /i/, respectively) within illegal sequences of consonants. Here, several populations of Japanese-Brazilian bilinguals are tested, using an explicit vowel identification task (experiment 1), and an implicit categorization and sequence recall task (experiment 2). Overall, second-generation immigrants, who first acquired Japanese at home and Brazilian during childhood (after age 4) showed a typical Brazilian pattern of result (and so did simultaneous bilinguals, who were exposed to both languages from birth on). In contrast, late bilinguals, who acquired their second language in adulthood, exhibited a pattern corresponding to their native language. In addition, an influence of the second language was observed in the explicit task of Exp. 1, but not in the implicit task used in Exp. 2, suggesting that second language experience affects mostly explicit or metalinguistic skills. These results are compared to other studies of phonological representations in adopted children or immigrants, and discussed in relation to the role of age of acquisition and sociolinguistic factors.

Implementation of internal monitoring programs for workers occupationally exposed by {sup 131}I in nuclear medicine services in Brazil

Energy Technology Data Exchange (ETDEWEB)

Oliveira, S.M.; Dantas, A.L.A.; Dantas, B.M., E-mail: salomao.marques@ymail.com [Instituto de Radioproteção e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil). Div. de Dosimetria

2017-07-01

In nuclear medicine services (NMS), workers routinely handle radionuclides for diagnostic and therapy. This practice represents a risk of incorporation by these radionuclides. The International Atomic Energy Agency (IAEA) recommends the implementation of an internal monitoring program on workers exposed to annual effective doses greater than 1 mSv, as for example, those who handle {sup 131}I for therapy in NMS. Currently, in Brazil, there are not enough available laboratories qualified to provide internal monitoring services to attend all possible demand of internal monitoring if it such regulation were applied by the Brazilian Nuclear Regulatory Board (CNEN). The objective of this work is to disseminate simple and inexpensive methods for in vivo routine thyroid monitoring of {sup 131}I using equipment available in the NMS. Devices available in two public hospitals located in the city of Rio de Janeiro were calibrated for use in occupational internal monitoring. The equipment evaluated in this work presented enough sensitivity for such application, being suitable to access intakes of {sup 131}I in the thyroid and able to estimate doses below 1 mSv. (author)

Assessment of exposure pathways connected with construction and operation of concrete bridge reinforced with very low level radioactive steel

International Nuclear Information System (INIS)

Panik, M.; Necas, V.

2012-01-01

Large amount of low level radioactive material arises during decommissioning of nuclear power plants. Material mostly comprises metal scrap and concrete ruble. Paper deals with recycling and reuse of metal scrap and its utilization as part of reinforcement of concrete bridges under the conditional release concept. Radiation exposure originating in very low level reinforcement steel consists of several exposure pathways. Short-term radiation impact is represented mostly by external exposure pathway and it is relevant to the construction workers and users of the bridge. Long-term radiation impacts on inhabitants living near finished bridge and it is divided into inhalation and ingestion of radionuclides-internal exposure pathways. Radiation impact caused by utilization of very low level radioactive waste was calculated using simulation software VISIPLAN 3D ALARA and GOLDSIM. Results of calculations provide fair summary of possibilities of utilization of conditionally released steel as reinforcement of concrete bridges. (Authors)

DETERMINANTS OF RETAINED EARNINGS IN PROFITABLE STEEL COMPANIES IN INDIA: A STUDY OF STEEL SECTOR

OpenAIRE

Dr. Sohaib Masood

2018-01-01

In this paper an attempt has been made to identify the important determinants of retained earnings in profitable steel companies in steel sector of India and which have impact on the retention of earnings of steel companies under study. Multiple linear regression is used to identify the determinants of retained earnings for a period of sixteen years. Also the importance of retained earnings as a source of finance for steel sector companies is also studied in the paper.

Ten years of Brazilian ballast water management

Science.gov (United States)

Castro, Maria Cecilia Trindade; Hall-Spencer, Jason M.; Poggian, Cecília Fonseca; Fileman, Timothy W.

2018-03-01

In 2005, Brazil addressed the environmental challenges posed by ballast water through a unilateral regulation, called the Maritime Standard N° 20 (NORMAM-20), applied to all shipping in her waters. This world-leading decision was the culmination of a process that started during the 1990‧s. Here, we summarize how these ballast water regulations were brought in and adopted and present the findings of 10 years of enforcement (2005-2015) in 39 ports along the Brazilian coast. We show that compliance with the Brazilian standard has increased significantly since the regulations were implemented (p < 0.001). After five years of implementation, non-compliance decreased probably reflecting an increase in awareness of the Brazilian Standard and a shift in the shipping industry commitment to minimize and control the spread of invasive species through ballast water. The Brazilian experience shows that very high levels (97%) of compliance with ballast water management regulations can be made to work in a region of global importance to the maritime industry. In the last decade, the rules governing ballast water in Brazil have evolved to address the demands from the maritime community and to provide updates such as imminent requirements for the use of ballast water management systems on board ships. These regulations are rarely cited when ballast water regulations are discussed internationally, yet there is much to learn from the proactive approach taken by Brazil such as what is feasible and enforceable.

Advanced cold rolled steels for automotive applications

Energy Technology Data Exchange (ETDEWEB)

Hofmann, Harald; Mattissen, Dorothea; Schaumann, Thomas Wilhelm [ThyssenKrupp Steel AG, Center of Materials Excellence, Dortmund (Germany)

2009-01-15

Advanced high-strength steels offer a great potential for the further development of automobile bodies-in-white due to their combined mechanical properties of high formability and strength. They represent the first choice in material selection for strength and crash-relevant parts with challenging geometries. The intensive development of multiphase steels by ThyssenKrupp Steel has led to hot dip galvanizing concepts with an outstanding forming potential. Hot rolled, hot dip galvanized complex-phase steels are currently produced in addition to cold rolled dual phase (DP) and retained austenite (RA) or transformation induced plasticity (TRIP) steels. New continuously annealed grades of steel are being developed with tensile strength levels of up to 1000 MPa in combination with sufficient ductility for the high demands of structural automobile components. These steels make use of the classic advantages of microalloying as well as the principles of DP steels and RA / TRIP steels. Further improvement of properties will be reached by the new class of high manganese alloyed steels. (orig.)

Effects of overvaluation and exchange rate volatility over industrial investment: empirical evidence and economic policy proposals for Brazil

Directory of Open Access Journals (Sweden)

José Luis Oreiro

2014-09-01

Full Text Available The present article aims to analyze the recent behavior of real exchange rate in Brazil and its effects over investment per worker in Brazilian manufacturing and extractive industry. Preliminary estimates presented in the article shows an over-valuation of 48% of real exchange rate in Brazil. The reaction between the level (and volatility of real exchange rate and investment (per worker in Brazil is analyzed by means of a panel data econometric model for 30 sectors of Brazilian manufacturing and extractive industry. The empirical results show that the level and volatility of real exchange rate has a strong effect over investment per worker in Brazilian industry. Finally, we conclude the article presenting a proposal for a new macroeconomic regime that aims to produce an acceleration of economic growth of Brazilian economy and, by that, a catching-up process with developed countries.

Brazilian franchisor: Entry and operation of internationalized franchise

Directory of Open Access Journals (Sweden)

Helder de Souza Aguiar

2017-11-01

Full Text Available This study aimed to compare the entry and operations strategies of franchisors of developed countries into foreign countries with Brazilian counterparts. Were there significant differences? An exploratory study was conducted with 16 international franchisors operating in Brazil and 31 Brazilian franchisors operating abroad. The results show that international franchisors operating abroad prefer to use a subsidiary in the destination country. At the same time, this strategy is little used by Brazilian franchisors, which prefer the strategy of direct franchises. For data collection, 47 directors or managers of the international expansion of Brazilian companies and the expansion directors of the international companies which operates in Brazil were interviewed. Although more expensive, the subsidiary in the target country offers greater control over the expansion of business reducing the problems caused by the distance of the country of origin. For the management of franchisors, this paper points out that the subsidiary is a natural evolution of entry and operation mode when it is desired or it is needed to control the expansion of networks in other countries. Thus, managers of franchisors in emerging countries should carefully examine the subsidiary option in the target country when their company considers accelerating international growth.

Climatically-mediated landcover change: impacts on Brazilian territory

Directory of Open Access Journals (Sweden)

MARINA ZANIN

Full Text Available ABSTRACT In the face of climate change threats, governments are drawing attention to policies for mitigating its effects on biodiversity. However, the lack of distribution data makes predictions at species level a difficult task, mainly in regions of higher biodiversity. To overcome this problem, we use native landcover as a surrogate biodiversity, because it can represent specialized habitat for species, and investigate the effects of future climate change on Brazilian biomes. We characterize the climatic niches of native landcover and use ecological niche modeling to predict the potential distribution under current and future climate scenarios. Our results highlight expansion of the distribution of open vegetation and the contraction of closed forests. Drier Brazilian biomes, like Caatinga and Cerrado, are predicted to expand their distributions, being the most resistant to climate change impacts. However, these would also be affected by losses of their closed forest enclaves and their habitat-specific or endemic species. Replacement by open vegetation and overall reductions are a considerable risk for closed forest, threatening Amazon and Atlantic forest biomes. Here, we evidence the impacts of climate change on Brazilian biomes, and draw attention to the necessity for management and attenuation plans to guarantee the future of Brazilian biodiversity.

Climatically-mediated landcover change: impacts on Brazilian territory.

Science.gov (United States)

Zanin, Marina; Tessarolo, Geiziane; Machado, Nathália; Albernaz, Ana Luisa M

2017-01-01

In the face of climate change threats, governments are drawing attention to policies for mitigating its effects on biodiversity. However, the lack of distribution data makes predictions at species level a difficult task, mainly in regions of higher biodiversity. To overcome this problem, we use native landcover as a surrogate biodiversity, because it can represent specialized habitat for species, and investigate the effects of future climate change on Brazilian biomes. We characterize the climatic niches of native landcover and use ecological niche modeling to predict the potential distribution under current and future climate scenarios. Our results highlight expansion of the distribution of open vegetation and the contraction of closed forests. Drier Brazilian biomes, like Caatinga and Cerrado, are predicted to expand their distributions, being the most resistant to climate change impacts. However, these would also be affected by losses of their closed forest enclaves and their habitat-specific or endemic species. Replacement by open vegetation and overall reductions are a considerable risk for closed forest, threatening Amazon and Atlantic forest biomes. Here, we evidence the impacts of climate change on Brazilian biomes, and draw attention to the necessity for management and attenuation plans to guarantee the future of Brazilian biodiversity.

Processing and refinement of steel microstructure images for assisting in computerized heat treatment of plain carbon steel

Science.gov (United States)

Gupta, Shubhank; Panda, Aditi; Naskar, Ruchira; Mishra, Dinesh Kumar; Pal, Snehanshu

2017-11-01

Steels are alloys of iron and carbon, widely used in construction and other applications. The evolution of steel microstructure through various heat treatment processes is an important factor in controlling properties and performance of steel. Extensive experimentations have been performed to enhance the properties of steel by customizing heat treatment processes. However, experimental analyses are always associated with high resource requirements in terms of cost and time. As an alternative solution, we propose an image processing-based technique for refinement of raw plain carbon steel microstructure images, into a digital form, usable in experiments related to heat treatment processes of steel in diverse applications. The proposed work follows the conventional steps practiced by materials engineers in manual refinement of steel images; and it appropriately utilizes basic image processing techniques (including filtering, segmentation, opening, and clustering) to automate the whole process. The proposed refinement of steel microstructure images is aimed to enable computer-aided simulations of heat treatment of plain carbon steel, in a timely and cost-efficient manner; hence it is beneficial for the materials and metallurgy industry. Our experimental results prove the efficiency and effectiveness of the proposed technique.

Laser cutting of thick steel plates and simulated steel components using a 30 kW fiber laser

International Nuclear Information System (INIS)

Tamura, Koji; Ishigami, Ryoya; Yamagishi, Ryuichiro

2016-01-01

Laser cutting of thick steel plates and simulated steel components using a 30 kW fiber laser was studied for application to nuclear decommissioning. Successful cutting of carbon steel and stainless steel plates up to 300 mm in thickness was demonstrated, as was that of thick steel components such as simulated reactor vessel walls, a large pipe, and a gate valve. The results indicate that laser cutting applied to nuclear decommissioning is a promising technology. (author)

EXTERNAL CORPORATE GOVERNANCE MECHANISMS: MERGERS AND ACQUISITIONS ON THE BRAZILIAN MARKET

Directory of Open Access Journals (Sweden)

Mario Augusto Parente Monteiro

2014-08-01

Full Text Available The research aims to answer the following question: What is the effectiveness of mergers and acquisitions in the Brazilian market as external corporate governance mechanism? The main objective of the study is to verify if mergers and acquisitions operations in Brazilian market may act as an external mechanism of corporate governance, replacing managers and, as a consequence of changes in management, improving financial performance. The study is exploratory, qualitative in its approach, supported by documentary research on secondary data concerning an intentional sample of Brazilian companies aiming to identify the effect of M&A operations on the corporate governance structure of the acquired firm and on its financial results. Data obtained on the website of the Brazilian Securities and Exchange Commission (CVM, related to Brazilian M&A operations in the period 2005-2010, were analyzed. Although M&A operations in Brazil were found to have disciplinary nature in our sample of firms in the studied period, our results are inconclusive regarding the effectiveness of these transactions and external governance mechanisms.

Worker participation - the Netherlands

OpenAIRE

Kwantes, J.H.

2014-01-01

Worker participation relates to the involvement of workers in the management decision-making processes. In this article attention is focused on worker participation related to occupational safety and health in the Netherlands. Worker participation can refer either to direct or indirect participation by the worker. Indirect participation involves employee representation, while direct participation relates to individual involvement in management’s decision-making processes. In the Framework Dir...

Systematic risk variations (beta) convertible debenture brazilian companies

OpenAIRE

Renata Drumond Pinto Coelho Antonino; Wagner Moura Lamounier; Roberto Kaehler de Albuquerque Maranhão

2010-01-01

purpose of this article is to analyze the impact of issuing convertible debentures on the systematic risk of Brazilian companies. Some applied researches in the U.S. capital market (STEIN, 1992; LEWIS et al, 2002; RAI, 2005) indicate that convertible debentures may be used as an alternative financing source when adverse selection problem makes stock issuing unattractive financing source. The analysis of Brazilian companies that issued convertible debentures recorded in the period from 1998 to...

Analysis of Brazilian SHP policy and its regulation scenario

International Nuclear Information System (INIS)

Tiago Filho, Geraldo Lucio; Rocha Galhardo, Camila; Cassia Barbosa, Adriana de; Mambeli Barros, Regina; Gracas Braga da Silva, Fernando das

2011-01-01

This article presents the main regulatory changes that occurred in the Brazilian power sector in 2009, along with the impacts these changes caused on the market, especially related to small hydropower (<30 MW). This study addresses regulatory issues based on inventory studies and records of basic projects, changes related to the compensation of the assured energy of SHPs in the Brazilian energy reallocation market, the socio-economic impact resulting from the construction of SHPs, SHPs in alternative resource auctions and finally the general outlook for the growth scenario for SHPs in Brazil according to the ten-year plan (2010-2019). The overall conclusions of this investigation were that the 2008/2009 biennium was a period of great changes in the regulation of small hydropower plants in Brazil, and the SHP market has shown maturity. Additionally, despite SHP being a type of technology that is completely dominated by domestic industry, in recent years, they have experienced policy disincentives caused by changes to rules that inhibit their growth. - Highlights: → Main regulatory changes in Brazilian Power Sector that have occurred in 2009. → The impact of these changes caused on market, especially about SHPs (<30 MW). → The Brazilian growth scenario for SHPs according to the ten-year plan (2010-2019). → 2008/2009 biennium was a period of changes in the Brazilian regulation of SHPs. → SHP is a type of technology that is completely dominated by domestic industry.

The role of interest rates in the Brazilian business cycles

Directory of Open Access Journals (Sweden)

Nelson F. Souza-Sobrinho

2011-09-01

Full Text Available This paper offers additional insights on the relationship between interest rates and business cycles in Brazil. First, I document that Brazilian interest rates are very volatile, counter-cyclical and positively correlated with net exports, as observed in other emerging market economies. Next, I present a dynamic stochastic general equilibrium model in which firms face working capital constraints and labor supply is independent of consumption. This parsimonious model, appropriately calibrated to the Brazilian economy, predicts that interest rate shocks can explain about one third of output fluctuations and delivers business cycle regularities consistent with the Brazilian data.

The mitogenome of Onchocerca volvulus from the Brazilian Amazonia focus

Directory of Open Access Journals (Sweden)

James L Crainey

2016-01-01

Full Text Available We report here the first complete mitochondria genome of Onchocerca volvulus from a focus outside of Africa. An O. volvulus mitogenome from the Brazilian Amazonia focus was obtained using a combination of high-throughput and Sanger sequencing technologies. Comparisons made between this mitochondrial genome and publicly available mitochondrial sequences identified 46 variant nucleotide positions and suggested that our Brazilian mitogenome is more closely related to Cameroon-origin mitochondria than West African-origin mitochondria. As well as providing insights into the origins of Latin American onchocerciasis, the Brazilian Amazonia focus mitogenome may also have value as an epidemiological resource.

Seismic Rehabilitation of RC Frames by Using Steel Panels

Science.gov (United States)

Mowrtage, Waiel

2008-07-01

Every major earthquake in Turkey causes a large number of building suffer moderate damage due to poor construction. If a proper and fast retrofit is not applied, the aftershocks, which may sometimes come days or weeks after the main shock, can push a moderately damaged building into a major damage or even total collapse. This paper presents a practical retrofit method for moderately damaged buildings, which increases the seismic performance of the structural system by reducing the displacement demand. Fabricated steel panels are used for the retrofit. They are light-weight, easy to handle, and can be constructed very quickly. Moreover, they are cheap, and do not need formwork or skilled workers. They can be designed to compensate for the stiffness and strength degradation, and to fit easily inside a moderately damaged reinforced concrete frame. To test the concept, a half-scale, single-story 3D reinforced concrete frame specimen was constructed at the shake-table laboratories of the Kandilli Observatory and Earthquake Research Institute of Bogazici University, and subjected to recorded real earthquake base accelerations. The amplitudes of base accelerations were increased until a moderate damage level is reached. Then, the damaged RC frames was retrofitted by means of steel panels and tested under the same earthquake. The seismic performance of the specimen before and after the retrofit was evaluated using FEMA356 standards, and the results were compared in terms of stiffness, strength, and deformability. The results have confirmed effectiveness of the proposed retrofit scheme.

Seismic Rehabilitation of RC Frames by Using Steel Panels

International Nuclear Information System (INIS)

Mowrtage, Waiel

2008-01-01

Every major earthquake in Turkey causes a large number of building suffer moderate damage due to poor construction. If a proper and fast retrofit is not applied, the aftershocks, which may sometimes come days or weeks after the main shock, can push a moderately damaged building into a major damage or even total collapse. This paper presents a practical retrofit method for moderately damaged buildings, which increases the seismic performance of the structural system by reducing the displacement demand. Fabricated steel panels are used for the retrofit. They are light-weight, easy to handle, and can be constructed very quickly. Moreover, they are cheap, and do not need formwork or skilled workers. They can be designed to compensate for the stiffness and strength degradation, and to fit easily inside a moderately damaged reinforced concrete frame.To test the concept, a half-scale, single-story 3D reinforced concrete frame specimen was constructed at the shake-table laboratories of the Kandilli Observatory and Earthquake Research Institute of Bogazici University, and subjected to recorded real earthquake base accelerations. The amplitudes of base accelerations were increased until a moderate damage level is reached. Then, the damaged RC frames was retrofitted by means of steel panels and tested under the same earthquake. The seismic performance of the specimen before and after the retrofit was evaluated using FEMA356 standards, and the results were compared in terms of stiffness, strength, and deformability. The results have confirmed effectiveness of the proposed retrofit scheme

Health Service Quality Scale: Brazilian Portuguese translation, reliability and validity.

Science.gov (United States)

Rocha, Luiz Roberto Martins; Veiga, Daniela Francescato; e Oliveira, Paulo Rocha; Song, Elaine Horibe; Ferreira, Lydia Masako

2013-01-17

The Health Service Quality Scale is a multidimensional hierarchical scale that is based on interdisciplinary approach. This instrument was specifically created for measuring health service quality based on marketing and health care concepts. The aim of this study was to translate and culturally adapt the Health Service Quality Scale into Brazilian Portuguese and to assess the validity and reliability of the Brazilian Portuguese version of the instrument. We conducted a cross-sectional, observational study, with public health system patients in a Brazilian university hospital. Validity was assessed using Pearson's correlation coefficient to measure the strength of the association between the Brazilian Portuguese version of the instrument and the SERVQUAL scale. Internal consistency was evaluated using Cronbach's alpha coefficient; the intraclass (ICC) and Pearson's correlation coefficients were used for test-retest reliability. One hundred and sixteen consecutive postoperative patients completed the questionnaire. Pearson's correlation coefficient for validity was 0.20. Cronbach's alpha for the first and second administrations of the final version of the instrument were 0.982 and 0.986, respectively. For test-retest reliability, Pearson's correlation coefficient was 0.89 and ICC was 0.90. The culturally adapted, Brazilian Portuguese version of the Health Service Quality Scale is a valid and reliable instrument to measure health service quality.

Worker participation - the Netherlands

NARCIS (Netherlands)

Kwantes, J.H.

2014-01-01

Worker participation relates to the involvement of workers in the management decision-making processes. In this article attention is focused on worker participation related to occupational safety and health in the Netherlands. Worker participation can refer either to direct or indirect participation

Gender equity in the Brazilian physics community at the present time

Science.gov (United States)

Saitovitch, Elisa Maria Baggio; Barbosa, Marcia Cristina; Funchal, Renata Zukanovich; de Pinho, Suani Tavares Rubim; de Santana, Ademir Eugênio

2015-12-01

We present an overview of the advances and difficulties in gender equity in the Brazilian physics community at the present time. Recognizing that in some cases the level of gender equity has remained unchanged for a decade, the Commission for Relations and Gender of the Brazilian Physical Society plans not only to continue current activities but also seek new ways to address the issue, which will be discussed at the 2nd Brazilian Conference for Women in Physics, to be organized for 2015.

Migration, Quality of Life And Health of Brazilian Immigrants in Portugal

Directory of Open Access Journals (Sweden)

Eliany Nazaré Oliveira

2017-05-01

Full Text Available Background: Immigrants face many challenges when settling in a foreign country, numerous factors influence this immigrant experience including the resources they bring with them and those they find in the host society. The literature has indicated that a significant number of individuals migrate in search of a better quality of life. In this context, the objective of the study was to analyze the quality of life and health of Brazilian immigrants living in Portugal, using the "Medical Outcomes Study: 36-Item Short Form Survey" (SF-36. Methods and Results: A cross-sectional study with a quantitative approach developed under the project titled: Health status and quality of life of Brazilian immigrants in Portugal conducted in the first half of 2016, with 682 Brazilian immigrant women over 18 living in Portugal. This study adopted as reference SF-36, a generic instrument for the evaluation of Quality of Life. It can be affirmed that the quality of life and health of Brazilian immigrants living in Portugal is good, since all dimensions presented values above 50%. It was evidenced that Brazilian immigrants who live alone have lower levels of quality of life and health than those who live with someone and, that Brazilian immigrants who are unemployed, have low levels of quality of life and health compared to those who are in another employment situation, and Brazilian immigrants entering the labor market with a workload of more than 40 hours per week present similar levels of quality of life and health compared to those who work fewer hours. Conclusion: In general, one can affirm that the quality of life and health of Brazilian immigrants living in Portugal is good, but due to the particularities of the migration process in the current political and international context, a systematic monitoring of living conditions and health of this population is necessary. Keywords: Emigrants and Immigrants; Quality of life; Women, Mental health

Electrochemical Corrosion Behavior of Carbon Steel and Hot Dip Galvanized Steel in Simulated Concrete Solution with Different pH Values

Directory of Open Access Journals (Sweden)

Wanchen XIE

2017-08-01

Full Text Available Hot dip galvanizing technology is now widely used as a method of protection for steel rebars. The corrosion behaviors of Q235 carbon steel and hot galvanized steel in a Ca(OH2 solution with a pH from 10 to 13 was investigated by electrode potential and polarization curves testing. The results indicated that carbon steel and hot galvanized steel were all passivated in a strong alkaline solution. The electrode potential of hot dip galvanized steel was lower than that of carbon steel; thus, hot dip galvanized steel can provide very good anodic protection for carbon steel. However, when the pH value reached 12.5, a polarity reversal occurred under the condition of a certain potential. Hot dip galvanized coating became a cathode, and the corrosion of carbon steel accelerated. The electrochemical behaviors and passivation abilities of hot dip galvanized steel and carbon steel were affected by pH. The higher the pH value was, the more easily they were passivated.DOI: http://dx.doi.org/10.5755/j01.ms.23.3.16675

Steel alloys

International Nuclear Information System (INIS)

Bloom, E.E.; Stiegler, J.O.; Rowcliffe, A.F.; Leitnaker, J.M.

1977-01-01

The invention deals with a fuel element for fast breeder reactors. It consits essentially of a uranium oxide, nitride, or carbide or a mixture of these fuels with a plutonium or thorium oxide, nitride, or carbide. The fuel elements are coated with an austenitic stainless steel alloy. Inside the fuel elements, vacancies or small cavities are produced by neutron effects which causes the steel coating to swell. According to the invention, swelling is prevented by a modification of type 304, 316, 321, or 12 K 72HV commercial steels. They consist mainly of Fe, Cr, and Ni in a ratio determined by a temary diagram. They may also contain 1.8 to 2.3% by weight of Mo and a fraction of Si (0.7 to 2% by weight) and Ti(0.10 to 0.5% by weight) to prevent cavity formation. They are structurally modified by cold working. (IHOE) [de

Clean steels for fusion

International Nuclear Information System (INIS)

Gelles, D.S.

1995-03-01

Fusion energy production has an inherent advantage over fission: a fuel supply with reduced long term radioactivity. One of the leading candidate materials for structural applications in a fusion reactor is a tungsten stabilized 9% chromium Martensitic steel. This alloy class is being considered because it offers the opportunity to maintain that advantage in the reactor structure as well as provide good high temperature strength and radiation induced swelling and embrittlement resistance. However, calculations indicate that to obtain acceptable radioactivity levels within 500 years after service, clean steel will be required because the niobium impurity levels must be kept below about 2 appm and nickel, molybdenum, nitrogen, copper, and aluminum must be intentionally restricted. International efforts are addressing the problems of clean steel production. Recently, a 5,000 kg heat was vacuum induction melted in Japan using high purity commercial raw materials giving niobium levels less than 0.7 appm. This paper reviews the need for reduced long term radioactivity, defines the advantageous properties of the tungsten stabilized Martensitic steel class, and describes the international efforts to produce acceptable clean steels

[Health & safety in a steel plant: technical and managerial action].

Science.gov (United States)

Fusato, M

2012-01-01

The report presents the experience in a steel company to improve the management of issues relating to health and safety of workers. The first part of the work focuses on the description of the interventions made by the company in recent years, which can be divided into technical interventions on production facilities, training and information, organizational activities and specific projects in collaboration with the health service. The second part presents the certification project according to OHSAS 18001, with particular focus on the efforts for a lean management of the documentation required by the management systems and for the automation of internal processes. The last part finally describes in detail the manner in which it was decided to address some issues that significantly affect the factory doctor: the recording and analysis of accidents and medications, management of hazardous substances and personal protective equipment.

Thermal stability of manganese-stabilized stainless steels

International Nuclear Information System (INIS)

Klueh, R.L.; Kenik, E.A.

1993-01-01

Previous work on a series of experimental high-manganese reduced-activation austenitic stainless steels demonstrated that they have improved tensile properties relative to type 316 stainless steel in both the annealed and 20% cold-worked conditions. Steels were tested with an Fe-20Mn-12Cr-0.25C (in weight percent) base composition, to which various combinations of Ti, W, V, P, and B were added. Tensile tests have now been completed on these steels after thermal aging at 600 degrees C. Thermal stability varied with composition, but the alloys were as stable or more stable than type 316 stainless steel. the strength of the annealed steels increased slightly after aging to 5000 h, while a strength decrease occurred for the cold worked steel. In both conditions, a steel containing a combination of all the alloying elements was most stable and had the best strength after thermal aging 5000 h at 600 degrees C. Despite having much higher strength than 316 stainless steel after aging, the ductility of the strongest experimental alloy was still as good as that of 316 stainless steel

Workers' Education Methods and Techniques for Rural Workers and Their Organisations: Summary of Views Expressed

Science.gov (United States)

Labour Education, 1975

1975-01-01

Several issues concerning rural workers' organizations and workers' education are discussed: motivation for self-organization, workers' education needs of rural workers, workers' education methods and techniques, training institutions and training personnel, financial resources, and the role of the International Labor Organization workers'…

[Brazilian guidelines for marketing baby food: history, limitations and perspectives].

Science.gov (United States)

Monteiro, Renata

2006-05-01

The objective of this paper is to present and discuss Brazilian policy concerning actions to protect breastfeeding, especially the history, international and national background, limitations, and perspectives of the Brazilian Guidelines for the Marketing of Baby Food, Pacifiers and Bottles. The Brazilian Guidelines, which play a crucial role in protecting breastfeeding against industry marketing strategies, were based on the International Code of Marketing of Breastmilk Substitutes, proposed by the World Health Organization in 1981. The first version of the Brazilian Guidelines was released in 1988, and there were subsequent revisions in 1992 and 2001/2002. In 2006, the Guidelines became national law. However, the strides made over this period in terms of regulation have been few because the law is not always observed. Thus, it is essential that all actors involved, including government officials, manufacturers and sellers of baby food and other baby products, teaching and health professionals and their associations, international bodies, and non-governmental organizations make a commitment to enforce the current law.

State, federalism and educational policies: implications in brazilian education

Directory of Open Access Journals (Sweden)

Karla Cristina Silva Sousa

2018-01-01

Full Text Available The article discusses the relationship between state and federalism as a political and administrative organizational form of the state and its implications in Brazilian educational policy. For that, we follow the analysis of the concepts of State, federalism, and educational policies from the classics of Machiavelli (2001, Locke (1998, Rousseau (1999, Hamilton, Jay and Madison (2003, Abrucio Arretche (1996, among others. Therefore, we see that the new Brazilian federalism based on the model proposed by the American Constitution brings the local powers – the municipalities – as new agents within the educational policy and the collaboration regime as a means of effecting cooperative federalism in Brazil. We conclude that the federalism, in Brazilian model, presents itself as demos constraining the national sub-governments.

The Brazilian cohort of pulp and paper workers: the logistic of a cancer mortality study Coorte brasileira de trabalhadores de indústria de celulose e papel: a logística de um estudo de mortalidade por câncer

Directory of Open Access Journals (Sweden)

Anaclaudia Gastal Fassa

1998-01-01

Full Text Available The International Agency for Research on Cancer (IARC proposed this international historical cohort study trying to solve the controversy about the increased risk of cancer in the workers of the Pulp and Paper Industry. One of the most important aspects presented by this study in Brazil was the strategies used to overcome the methodological challenges, such as: data access, data accuracy, data availability, multiple data sources, and the large follow-up period. Through multiple strategies it was possible to build a Brazilian cohort of 3,622 workers, to follow them with a 93 percent success rate and to identify in 99 percent of the cases the cause of death. This paper, has evaluated the data access, data accuracy and the effectiveness of the strategies used and the different sources of data.A Agência Internacional para Pesquisa sobre Câncer (IARC propôs uma coorte histórica internacional para tentar resolver a controvérsia sobre o risco aumentado de câncer em trabalhadores das indústrias de celulose e papel. Um dos aspectos mais relevantes deste estudo no Brasil refere-se às estratégias utilizadas para superar desafios metodológicos, tais como: acesso aos dados, acurácia e disponibilidade dos dados, múltiplas fontes de dados e longo período de acompanhamento. Através de múltiplas estratégias, foi possível construir uma coorte brasileira de 3.622 trabalhadores, acompanhar 93% dos casos e identificar a causa de 99% dos óbitos. Este artigo avalia o acesso aos dados, sua acurácia e a efetividade das estratégias utilizadas para o acompanhamento da coorte.

Alternative fuels: a Brazilian outlook

International Nuclear Information System (INIS)

Moreira, J.R.; Serra, G.E.

1990-01-01

This paper focuses on studies and information related to the use of alternative fuels in Brazil. The first part of this paper deals with the economics of different biomass technologies. The analysis consists of a careful costing of all operations involved. The study deals with wood, sugar cane and cassava, since these crops are exploited for commercial purposes in Brazil. Corn, although a useful raw material for producing ethanol in the United States, is not used for this purpose in Brazil. The second part deals with the industrial technologies used to convert biomass into energy. We consider several forms of energy derived from biomass and evaluate the economics of the processes. When opportune, we compare costs with those of the North American market. Market analysis and displacement of conventional energy are the subject of the third part of the paper. While the cost of each product is evaluated in most cases; in others the current market price is used. Finally, we raise the issues of institutional problems and planning and offer some conclusions on the future of biomass as an alternative energy source. The technological discussion in this paper is based on the Brazilian experience in producing ethanol and other fuels from biomass. It is possible to extrapolate the Brazilian experience to other developing countries. The observations made in this chapter are based on the conditions prevalent in the Brazilian south-central agricultural region, specifically the state of Sao Paulo. (author). 91 refs., 16 figs., 11 tabs

The brazilian indigenous planetary-observatory

Science.gov (United States)

Afonso, G. B.

2003-08-01

We have performed observations of the sky alongside with the Indians of all Brazilian regions that made it possible localize many indigenous constellations. Some of these constellations are the same as the other South American Indians and Australian aborigines constellations. The scientific community does not have much of this information, which may be lost in one or two generations. In this work, we present a planetary-observatory that we have made in the Park of Science Newton Freire-Maia of Paraná State, in order to popularize the astronomical knowledge of the Brazilian Indians. The planetary consists, essentially, of a sphere of six meters in diameter and a projection cylinder of indigenous constellations. In this planetary we can identify a lot of constellations that we have gotten from the Brazilian Indians; for instance, the four seasonal constellations: the Tapir (spring), the Old Man (summer), the Deer (autumn) and the Rhea (winter). A two-meter height wooden staff that is posted vertically on the horizontal ground similar to a Gnomon and stones aligned with the cardinal points and the soltices directions constitutes the observatory. A stone circle of ten meters in diameter surrounds the staff and the aligned stones. During the day we observe the Sun apparent motions and at night the indigenous constellations. Due to the great community interest in our work, we are designing an itinerant indigenous planetary-observatory to be used in other cities mainly by indigenous and primary schools teachers.

Sliding wear characteristics of carburized steels and thermally refined steels implanted with nitrogen ions

International Nuclear Information System (INIS)

Terashima, Keiichi; Koda, Hiroyuki; Takeuchi, Eiichi.

1995-01-01

In order to concretely examine the application of surface reforming by ion implantation, nitrogen ion implantation was applied to the thermally refined steels S45C and SCM440 and the carburized steel SCM415, which are high versatile steels for mechanical structures, and their friction and wear characteristics were examined. The results are summarized as follows. In the surface-reformed material, in which nitrogen was implanted for the purpose of improving the seizure durability of the carburized steel, the load-frictional coefficient curve in lubricated sliding friction was similar to that of the material without implantation, but it was recognized that the load at which seizure occurred reached 2000 kgf or more, and as the amount of implantation was more, the material withstood higher load. In the lubricated sliding friction using a pin-ring type wear testing machine of the thermally refined steels and those to which implantation was applied, it was recognized that the specific wear amount was less in the implanted steels than in those without implantation. The results of the analysis of the implanted surface layers and the friction surfaces are reported. (K.I.)

Larson-Miller Constant of Heat-Resistant Steel

Science.gov (United States)

Tamura, Manabu; Abe, Fujio; Shiba, Kiyoyuki; Sakasegawa, Hideo; Tanigawa, Hiroyasu

2013-06-01

Long-term rupture data for 79 types of heat-resistant steels including carbon steel, low-alloy steel, high-alloy steel, austenitic stainless steel, and superalloy were analyzed, and a constant for the Larson-Miller (LM) parameter was obtained in the current study for each material. The calculated LM constant, C, is approximately 20 for heat-resistant steels and alloys except for high-alloy martensitic steels with high creep resistance, for which C ≈ 30 . The apparent activation energy was also calculated, and the LM constant was found to be proportional to the apparent activation energy with a high correlation coefficient, which suggests that the LM constant is a material constant possessing intrinsic physical meaning. The contribution of the entropy change to the LM constant is not small, especially for several martensitic steels with large values of C. Deformation of such martensitic steels should accompany a large entropy change of 10 times the gas constant at least, besides the entropy change due to self-diffusion.

Properties of hot rolled steels for enamelling

International Nuclear Information System (INIS)

Gavrilovski, Dragica; Gavrilovski, Milorad

2003-01-01

The results of an investigation of the structure and properties of experimental produced hot rolled steels suitable for enamelling are presented in the paper. Hot rolled steels for enamelling represent a special group of the steels for conventional enamelling. Their quality has to be adapted to the method and conditions of enamelling. Therefore, these steels should meet some specific requirements. In addition to usual investigation of the chemical composition and mechanical properties, microstructure and quality of the steel surface also were investigated. The basic aim was to examine steels capability for enamelling, i. e. steels resistance to the fish scales phenomena, by trial enamelling, as well as quality of the steel - enamel contact surface, to evaluate the binding. Also, the changes of the mechanical properties, especially the yield point, during thermal treatment, as a very specific requirement, were investigated, by simplified method. Good results were obtained confirming the steels capability for enamelling. (Original)

Reduced-activation steels: present status and future development

International Nuclear Information System (INIS)

Klueh, R.L.

2007-01-01

Full text of publication follows: Reduced-activation steels for fusion reactor applications were developed in the 1980's to replace the commercial elevated- temperature steels first considered. In the United States, this involved replacing Sandvik HT9 and modified 9Cr-1Mo steels. Reduced-activation steels, which were developed for more rapid radioactivity decay following exposure in a fusion neutron environment, were patterned after the commercial steels they were to replace. The objective for the reduced-activation steels was that they have strengths (yield stress and ultimate tensile strength from room temperature to 600 deg. C) and impact toughness (measured in a Charpy test) comparable to or better than the steels they were replacing. That objective was achieved in reduced-activation steels developed in Japan, Europe, and the United States. Since the reduced-activation steels were developed in the 1980's, reactor designers have been interested designs for increased efficiency of future fusion plants. This means reactors will need to operate at higher temperatures-above 550 deg. C, which is the upper-temperature limit for the reduced-activation steels. Although the tensile and impact toughness of the reduced-activation steels exceed those of the commercial steels they were patterned after, their creep-rupture properties are inferior to some of the commercial steels they replaced. furthermore, they are much inferior to commercial steels that have been developed since the 1980's. Reasons for why the creep-rupture properties for the new commercial ferritic/martensitic steels are superior to the earlier commercial steels and the reduced-activation steels were examined. The reasons involve compositional changes that were made in the earlier commercial steels to give the new commercial steels their superior properties. Computational thermodynamics calculations were carried out to compare the expected equilibrium phases. It appears that similar changes in composition

In situ 3D monitoring of corrosion on carbon steel and ferritic stainless steel embedded in cement paste

KAUST Repository

Itty, Pierre-Adrien

2014-06-01

In a X-ray microcomputed tomography study, active corrosion was induced by galvanostatically corroding steel embedded in cement paste. The results give insight into corrosion product build up, crack formation, leaching of products into the cracks and voids, and differences in morphology of corrosion attack in the case of carbon steel or stainless steel reinforcement. Carbon steel was homogeneously etched away with a homogeneous layer of corrosion products forming at the steel/cement paste interface. For ferritic stainless steel, pits were forming, concentrating the corrosion products locally, which led to more extensive damage on the cement paste cover. © 2014 Elsevier Ltd.

In situ 3D monitoring of corrosion on carbon steel and ferritic stainless steel embedded in cement paste

KAUST Repository

Itty, Pierre-Adrien; Serdar, Marijana; Meral, Cagla; Parkinson, Dula; MacDowell, Alastair A.; Bjegović, Dubravka; Monteiro, Paulo J.M.

2014-01-01

In a X-ray microcomputed tomography study, active corrosion was induced by galvanostatically corroding steel embedded in cement paste. The results give insight into corrosion product build up, crack formation, leaching of products into the cracks and voids, and differences in morphology of corrosion attack in the case of carbon steel or stainless steel reinforcement. Carbon steel was homogeneously etched away with a homogeneous layer of corrosion products forming at the steel/cement paste interface. For ferritic stainless steel, pits were forming, concentrating the corrosion products locally, which led to more extensive damage on the cement paste cover. © 2014 Elsevier Ltd.

Scientific and Technological Principles of Development of New Cold-Resistant Arc-Steels (Steels for Arctic Applications)

Science.gov (United States)

Sych, O. V.; Khlusova, E. I.; Yashin, E. A.

2017-12-01

The paper presents the results of quantitative analysis of C, Mn, Ni and Cu content on strength and cold-resistance of rolled plates. Relations between the ferritic-bainitic structure morphology and anisotropy and steel performance characteristics have been established. Influence of thermal and deformation rolling patterns on steel structure has been studied. The steel chemical composition has been improved and precision thermomechanical processing conditions for production of cold-resistant Arc-steel plates have been developed.

Irradiation embrittlement of pressure vessel steels

International Nuclear Information System (INIS)

Brumovsky, M.; Vacek, M.

1975-01-01

A Standard Research Programme on Irradiation Embrittlement of Pressure Vessel Steels was approved by the Coordinating Meeting on the 12th May 1972 at the Working Group on Engineering Aspects of Irradiation Embrittlement of Pressure Vessel Steels. This Working Group was set up by the International Atomic Energy Agency in Vienna. Seven countries with their research institutes agreed on doing irradiation experiments according to the approved programme on steel A533 B from the U.S. HSST Programme. The Czechoslovak contribution covering tensile and impact testing of non-irradiated steel and steel irradiated at 280degC to 1.3 x 10 23 n/m 2 (E above 1 MeV) is presented in this report. As an additional part the same set of experiments was carried out on two additional steels - A 542 and A 543, made in SKODA Works for comparison of their irradiation embrittlement and hardening with A533 B steel. (author)

Brazilian impact factor of physics journals - the third side of the coin

Directory of Open Access Journals (Sweden)