WorldWideScience

Sample records for bragg zone

  1. Multilayer Bragg Fresnel zone plate for coherent HHG radiation

    International Nuclear Information System (INIS)

    Coherent diffractive imaging in the (soft) X-ray regime is an emerging new lens-less X-ray microscopy technique with the future potential of molecular or even atomic resolution, because it is ultimately limited by the wavelength of the illuminating radiation and not by the imaging quality of the X-ray lens. However, this technique depends on the availability of coherent x-ray sources as well as optics for spectral filtering and focusing. We describe the development fabrication and testing of a reflective multilayer Bragg Fresnel phase zone plate for focusing coherent XUV radiation at 13 nm wavelength from a High Harmonic Generation source. This X-ray optical device serves for spectral filtering as well as sub-micron focusing of the HH spectrum in a single element for largely reduced losses. Large zone plate structures (conventional, spiral) matching the HH beam size are recorded by e-beam lithography in ultrathin HSQ e-beam resist and over-coated with a reflective Mo/Si multilayer by ion beam deposition. By accurately matching the groove depth of the diffractive structure to odd multiples of the quarter Bragg wavelength, the total diffraction efficiency can be improved by a factor of 4 theoretically compared to amplitude structures.

  2. Microwave Bragg-scattering zone-axis-pattern analysis

    CERN Document Server

    Fraundorf, P; Garver, W; Freeman, M; Proctor, D

    2013-01-01

    Louis deBroglie's connection between momentum and spatial-frequency vectors is perhaps most viscerally-experienced via the real-time access that electron-diffraction provides to transverse slices of a crystal's reciprocal lattice. The classic introductory (and/or advanced) physics lab-experiment on microwave Bragg-scattering can with a bit of re-arrangement also give students access to "zone-axis-pattern" slices through the 3D spatial-frequency (i.e. reciprocal) lattice of a ball-bearing crystal. In this paper we show how data from the standard experimental set up can be used to generate zone-axis-patterns oriented down the crystal rotation-axis. This may be used to give students direct experience with crystal shape-transforms (which help to explain anomalous peaks), as well as to the complementary relation between non-Cartesian basis-vectors in direct and reciprocal (co-vector) space.

  3. Ti/Al multilayer zone plate and Bragg-Fresnel lens

    International Nuclear Information System (INIS)

    By using a helicon plasma sputtering technique, a one-dimensional Ti/Al multilayer zone plate with an outermost layer width of 76 mm has been successfully fabricated. A Bragg-Fresnel lens has been made by combining this zone plate with a Ge(422) crystal. Comparison of the Ti/Al multilayer zone plate with the Ag/Al zone plate is discussed in terms of focusing efficiency

  4. Are Bragg Peaks Gaussian?

    OpenAIRE

    Hammouda, Boualem

    2014-01-01

    It is common practice to assume that Bragg scattering peaks have Gaussian shape. The Gaussian shape function is used to perform most instrumental smearing corrections. Using Monte Carlo ray tracing simulation, the resolution of a realistic small-angle neutron scattering (SANS) instrument is generated reliably. Including a single-crystal sample with large d-spacing, Bragg peaks are produced. Bragg peaks contain contributions from the resolution function and from spread in the sample structure....

  5. Bragg grating rogue wave

    CERN Document Server

    Degasperis, Antonio; Aceves, Alejandro B

    2015-01-01

    We derive the rogue wave solution of the classical massive Thirring model, that describes nonlinear optical pulse propagation in Bragg gratings. Combining electromagnetically induced transparency with Bragg scattering four-wave mixing, may lead to extreme waves at extremely low powers.

  6. Bragg grating rogue wave

    Energy Technology Data Exchange (ETDEWEB)

    Degasperis, Antonio [Dipartimento di Fisica, “Sapienza” Università di Roma, P.le A. Moro 2, 00185 Roma (Italy); Wabnitz, Stefan, E-mail: stefan.wabnitz@unibs.it [Dipartimento di Ingegneria dell' Informazione, Università degli Studi di Brescia and INO-CNR, via Branze 38, 25123 Brescia (Italy); Aceves, Alejandro B. [Southern Methodist University, Dallas (United States)

    2015-06-12

    We derive the rogue wave solution of the classical massive Thirring model, that describes nonlinear optical pulse propagation in Bragg gratings. Combining electromagnetically induced transparency with Bragg scattering four-wave mixing may lead to extreme waves at extremely low powers.

  7. Bragg Curve Spectroscopy

    International Nuclear Information System (INIS)

    An alternative utilization is presented for the gaseous ionization chamber in the detection of energetic heavy ions, which is called Bragg Curve Spectroscopy (BCS). Conceptually, BCS involves using the maximum data available from the Bragg curve of the stopping heavy ion (HI) for purposes of identifying the particle and measuring its energy. A detector has been designed that measures the Bragg curve with high precision. From the Bragg curve the range from the length of the track, the total energy from the integral of the specific ionization over the track, the dE/dx from the specific ionization at the beginning of the track, and the Bragg peak from the maximum of the specific ionization of the HI are determined. This last signal measures the atomic number, Z, of the HI unambiguously

  8. Supersymmetric Bragg gratings

    International Nuclear Information System (INIS)

    The supersymmetric (SUSY) structure of coupled-mode equations that describe scattering of optical waves in one-dimensional Bragg gratings is highlighted. This property can find applications to the synthesis of special Bragg filters and distributed-feedback (DFB) optical cavities. In particular, multiple SUSY (Darboux–Crum) transformations can be used to synthesize DFB filters with any desired number of resonances at target frequencies. As an example, we describe the design of a DFB structure with a set of equally-spaced resonances, i.e. a frequency comb transmission filter. (paper)

  9. Double Bragg Interferometry.

    Science.gov (United States)

    Ahlers, H; Müntinga, H; Wenzlawski, A; Krutzik, M; Tackmann, G; Abend, S; Gaaloul, N; Giese, E; Roura, A; Kuhl, R; Lämmerzahl, C; Peters, A; Windpassinger, P; Sengstock, K; Schleich, W P; Ertmer, W; Rasel, E M

    2016-04-29

    We employ light-induced double Bragg diffraction of delta-kick collimated Bose-Einstein condensates to create three symmetric Mach-Zehnder interferometers. They rely on (i) first-order, (ii) two successive first-order, and (iii) second-order processes which demonstrate the scalability of the corresponding momentum transfer. With respect to devices based on conventional Bragg scattering, these symmetric interferometers double the scale factor and feature a better suppression of noise and systematic uncertainties intrinsic to the diffraction process. Moreover, we utilize these interferometers as tiltmeters for monitoring their inclination with respect to gravity. PMID:27176520

  10. Silicon graphene Bragg gratings

    OpenAIRE

    Capmany, Jose; Domenech, David; Munoz, Pascual

    2013-01-01

    We propose the use of interleaved graphene sections on top of a silicon waveguide to implement tunable Bragg gratings. The filter central wavelength and bandwidth can be controlled changing the chemical potential of the graphene sections. Apodization techniques are also presented.

  11. Ion implanted Bragg endash Fresnel lens

    International Nuclear Information System (INIS)

    We have investigated the feasibility of widening the bandpath of the Bragg endash Fresnel optical element through the use of ion implantation. The focusing properties of Bragg endash Fresnel lenses (BFLs) were studied as a function of the implantation dose and energy. An enhancement of the focus intensity of up to 15% was found, which is less than expected. Due to the complicated scattering of the low energy ions inside the micrometer- and submicrometer-sized crystal features that make up the BFL relief, the implantation technology destroys the peripheral zones of the BFL more than it increases the intensity in the focus. Nevertheless we believe that high energy implantation can be successfully used to modify the BFL reflectivity, especially in the case of nearly backscattering reflection. copyright 1996 American Institute of Physics

  12. Recent advances and prospects of Bragg-Fresnel optics

    International Nuclear Information System (INIS)

    Diffraction optics, i.e. Fresnel zone plates, holograms and diffraction gratings, has a limited application in the optical wavelength range. A decrease in wavelength to 100 nm and less changes conventional relationships between different types of optical elements owing to the change in the radiation-substance interaction since absorption starts to play a more important role as compared to refraction. Therefore at 1 nm approx lt λ approx lt 100 nm focusing elements may be fabricated only from thin membranes distinguished by an abrupt change of either absorption (amplitude zone plates) or transmitted wave phase (phase zone plates). In this wavelength range it is necessary that three-dimensional Bragg and Bragg-Fresnel elements should be used. Three-dimensional elements appear to be efficient for the whole short wavelength range 10-2 nm approx lt λ approx lt 100 nm. In doing so, the use of Bragg diffraction enables fabrication of high resolution gratings, radiation modulators and prisms. Thus, two- and three-dimensional diffraction elements form the basis for production of multifunctional x-ray optics in a wide wavelength range. It is essential that these elements can be reproduced in production quantities. Below is a summary of the results obtained at the Institute of Problems of Microelectronics Technology and High Purity Materials (IPMT) of the USSR Academy of Sciences in 1984-88. Emphasis is placed on Bragg- and Bragg-Fresnel elements that are fundamental for future x-ray optics. 15 refs., 2 figs., 1 tab

  13. Bragg reflection program

    International Nuclear Information System (INIS)

    This user's guide to the Bragg Reflection Program (BRP) is in the nature of an informal report. The general purpose of BRP is to scan a series of Bragg reflections automatically in order to obtain profiles and integrated intensities. The program is used in conjunction with the SUPERVISOR and READ packages, and the procedures for using it are similar to those for the Triple-Axis Control program. All the general features of the system, SUPERVISOR and READ packages as described in the Spectrometer Control Systems User's Guide are preserved. The presentation assumes that the reader is familiar with these. Sections are given on the READ package, execution and use, error messages, and output. A few sample problems are shown. (1 figure) (U.S.)

  14. MEMS Bragg grating force sensor

    DEFF Research Database (Denmark)

    Reck, Kasper; Thomsen, Erik Vilain; Hansen, Ole

    2011-01-01

    We present modeling, design, fabrication and characterization of a new type of all-optical frequency modulated MEMS force sensor based on a mechanically amplified double clamped waveguide beam structure with integrated Bragg grating. The sensor is ideally suited for force measurements in harsh...... environments and for remote and distributed sensing and has a measured sensitivity of -14 nm/N, which is several times higher than what is obtained in conventional fiber Bragg grating force sensors. © 2011 Optical Society of America....

  15. A new generation of multilayer Bragg-Fresnel lenses

    International Nuclear Information System (INIS)

    A new type of Bragg-Fresnel multilayer lens (BFML) have been fabricated at IMT RAS and tested at LURE. The idea to combine different diffraction orders of a zone plate in one focal spot introduced by Simpson and Michette has been realized in a BFML with extended aperture. Matching of the two diffraction orders, the first and third, into one focal plane increases the output flux by a factor of two and the spatial resolution in the same order of magnitude

  16. Polymer optical fiber bragg grating sensors

    DEFF Research Database (Denmark)

    Stefani, Alessio; Yuan, Scott Wu; Andresen, Søren;

    2010-01-01

    Fiber-optical accelerometers based on polymer optical fiber Bragg gratings are reported. We have written fiber Bragg gratings for 1550 nm and 850 nm operations, characterized their temperature and strain response, and tested their performance in a prototype accelerometer....

  17. Diffraction contrast of a Bragg-Fresnel lens in white and monochromatic radiation

    International Nuclear Information System (INIS)

    Recent advances in the studies of x-ray diffraction phenomena and the technology of structures with elements up to hundreds of angstroms in size open up possibilities for fabrication of effective x-ray focusing elements with three-dimensional Fresnel zone structures, namely, Bragg-Fresnel lenses (BFL). BFL differs favorably from the Fresnel zone plate by the absence of chromatic aberrations which is due to the high spectral selectivity of Bragg reflection, triangle λ/λ∼10-4 divided by 10-5. This enables observation of focusing and image transmission in the white spectrum of synchrotron radiation (SR). 7 refs., 7 figs

  18. Fiber Bragg Grating Based Thermometry

    OpenAIRE

    Ahmed, Zeeshan; Filla, James; Guthrie, William; Quintavalle, John

    2016-01-01

    In recent years there has been considerable interest in developing photonic temperature sensors such as the Fiber Bragg gratings (FBG) as an alternative to resistance thermometry. In this study we examine the thermal response of FBGs over the temperature range of 233 K to 393 K. We demonstrate, in a hermetically sealed dry Argon environment, that FBG devices show a quadratic dependence on temperature with expanded uncertainties (k = 2) of ~500 mK. Our measurements indicate that the combined m...

  19. BESSY Bragg-Fresnel multilayer beam monitors

    International Nuclear Information System (INIS)

    X-ray optical systems based on Bragg-Fresnel multilayer components imaging an electron beam in a storage ring with microm resolution are presented. Design concepts are compared to alternative methods, and the aberrations and limits of Bragg-Fresnel multilayer optics are discussed. Experimental results of imaging the BESSY 1 source with sub 10 microm resolution are presented and the development of a compact Bragg-Fresnel multilayer telescope as a BESSY 2 standard beam monitor is described

  20. Fiber Bragg Grating Based Thermometry

    CERN Document Server

    Ahmed, Zeeshan; Guthrie, William; Quintavalle, John

    2016-01-01

    In recent years there has been considerable interest in developing photonic temperature sensors such as the Fiber Bragg gratings (FBG) as an alternative to resistance thermometry. In this study we examine the thermal response of FBGs over the temperature range of 233 K to 393 K. We demonstrate, in a hermetically sealed dry Argon environment, that FBG devices show a quadratic dependence on temperature with expanded uncertainties (k = 2) of ~500 mK. Our measurements indicate that the combined measurement uncertainty is dominated by uncertainty in determining the peak center fitting and by thermal aging of polyimide coated fibers.

  1. High order Bragg grating microfluidic dye laser

    DEFF Research Database (Denmark)

    Balslev, Søren; Kristensen, Anders

    2004-01-01

    We demonstrate a single mode distributed feedback liquid dye laser, based on a short 133 'rd order Bragg grating defined in a single polymer layer between two glass substrates.......We demonstrate a single mode distributed feedback liquid dye laser, based on a short 133 'rd order Bragg grating defined in a single polymer layer between two glass substrates....

  2. Reflectivity and Braggs Wavelength in FBG

    Directory of Open Access Journals (Sweden)

    Dinesh Arora

    2011-12-01

    Full Text Available We have presented an analytical model of splitters based on Fiber Bragg grating used to detect a Bragg wavelength from the number of wavelengths which are traveling in an optical fiber. The number of grids and grating length can be used as a wavelength shifter.This paper presents experimental results that are used to show the effect of number of grids and the length of the grating on the Bragg wavelength and reflectivity of Fiber Bragg Grating (FBG. The pitch of grating is directly proportional to the grating length and inversely proportional to number of grids. When the grating length is fixed and the number of grids is increased, the Bragg wavelength decreases and reflectivity increases. This increase in reflectivity is very small. Further when the number of grids was kept constant and the grating length was increased the Bragg wavelength increases. The effect of this increase in grating length on reflectivity is a very small. In our model, the effectiveness of the grating in extracting the Braggs wavelength is nearly 100%.

  3. BESSY Bragg-Fresnel multilayer beam monitors

    International Nuclear Information System (INIS)

    X-ray optical systems based on Bragg-Fresnel multilayer components imaging an electron beam in a storage ring with μm resolution are presented. Design concepts are compared to alternative methods, and the aberrations and limits of Bragg-Fresnel multilayer optics are discussed. Experimental results of imaging the BESSY I source with sub-10-μm resolution are presented, and the development of a compact Bragg-Fresnel multilayer telescope as a BESSY II standard beam monitor is described. copyright 1996 American Institute of Physics

  4. Strain imaging by Bragg edge neutron transmission

    CERN Document Server

    Santisteban, J R; Fitzpatrick, M E; Steuwer, A; Withers, P J; Daymond, M R; Johnson, M W; Rhodes, N; Schooneveld, E M

    2002-01-01

    The Bragg edges appearing in the transmitted time-of-flight spectra of polycrystalline materials have been recorded using a two-dimensional array of detectors. Subsequent analysis has enabled maps of the elastic strain to be produced.

  5. Mode characteristics of hollow core Bragg fiber

    Institute of Scientific and Technical Information of China (English)

    Minning Ji; Zhidong Shi; Qiang Guo

    2005-01-01

    Analytical expression to calculate propagation constant and mode field of the hollow core Bragg fiber is derived. Numerical results are presented. It is shown that the fundamental mode of the hollow core Bragg fiber is circularly symmetric TE01 mode with no polarization degeneracy, while the higher order mode may be HE11, TM01, or TE02 etc.. This property is different from conventional optical fiber that its fundamental mode is the linearly polarized HE11 mode and is polarization degeneracy.

  6. Principles of Bragg-Fresnel multilayer optics

    OpenAIRE

    Aristov, V. V.; Erko, A.I.; Martynov, V.V.

    1988-01-01

    The paper describes the principles and theoretical models of new X-ray optical elements based on the behaviour of Bragg-Fresnel diffraction. The use of volume diffraction permits one to achieve better spatial resolution compared with conventional plane optics and bending mirrors. The construction of Bragg-Fresnel elements combines the advantages of high-resolution Fresnel optics with stability of multilayer mirrors.

  7. Bragg diffraction of fermions at optical potentials

    International Nuclear Information System (INIS)

    This thesis describes the Bragg diffraction of ultracold fermions at an optical potential. A moving optical lattice was created, by overlaying two slightly detuned lasers. Atoms can be diffracted at this lattice if the detuning fulfills the Bragg condition for resting atoms. This Bragg diffraction is analyzed systematically in this thesis. To this end Rabi oscillations between the diffraction states were driven, as well in the weakly interacting Bragg regime, as in the strongly interacting Kapitza-Dirac regime. Simulations, based on a driven two-, respectively multilevel-system describe the observed effects rather well. Furthermore, the temporal evolution of the diffracted states in the magnetic trapping potential was studied. The anharmonicity of the trap in use and the scattering cross section for p-wave collisions in a 6Li system was determined from the movement of these states. Moreover the momentum distribution of the fermions was measured with Bragg spectroscopy and first signs of Fermi degeneracy were found. Finally an interferometer with fermions was build, exhibiting a coherence time of more than 100 μs. With this, the possibility for measurement and manipulation of ultracold fermions with Bragg diffraction could bee shown. (orig.)

  8. Reflectivity and Braggs Wavelength in FBG

    Directory of Open Access Journals (Sweden)

    Dinesh Arora, Dr.Jai Prakash, Hardeep Singh & Dr.Amit Wason

    2011-12-01

    Full Text Available We have presented an analytical model of splitters based on Fiber Bragg Grating used to detect a Braggwavelength from the number of wavelengths which are traveling in an optical fiber. The number of gridsand grating length can be used as a wavelength shifter. This paper presents experimental results that areused to show the effect of number of grids, the length of the grating on the Bragg wavelength andreflectivity of Fiber Bragg Grating (FBG. The pitch of grating is directly proportional to the grating lengthand inversely proportional to number of grids. When the grating length is fixed and the number of grids isincreased, the Bragg wavelength decreases resulting in increased reflectivity. This increased reflectivity isvery small. Further when the number of grids is kept constant and the grating length is increased theBragg wavelength increases. The effect of this increase in grating length on reflectivity is a very small. Inour model, the effectiveness of the grating in extracting the Braggs wavelength is nearly 100%.

  9. A Linear Single-Crystal Bragg-Fresnel Lens With SiO2 Surface Structure

    International Nuclear Information System (INIS)

    Bragg-Fresnel lens (BFL) as thin silicon dioxide strips grown on the surface of perfect silicon crystal was designed, manufactured and experimentally tested. In this case the BFL structure consists of a set of silicon dioxide rectangular shape etched zones arranged by the Fresnel zone law. The stress within coated and uncoated crystal regions is opposite in sign, whether tensile or compressive. The strain in the substrate crystal lattice directly underneath discontinuities in the deposited film give rise to phase difference between waves diffracted from coated and uncoated crystal regions. This phase difference is known to be dependent on the thickness and composition of film and substrate. The focusing properties of Si/SiO2 BFLs with 107 zones and 0.3 micrometer outermost zone width were experimentally studied as a function of the silicon oxide thickness in the range of 100 - 400 nanometers. It was shown that deformation Bragg-Fresnel lenses could effectively focus hard X-rays to a linear focal spot of about 2 microns. The efficiency of focusing was found to be about 16% at energy 10 keV. The developed lens design is a promising approach to extend the angular range of focusing by Bragg-Fresnel optical elements and to avoid some drawbacks of BFL properties related to aspect-ratio dependent etching

  10. Fiber Bragg Grating Filter High Temperature Sensors

    Science.gov (United States)

    Lyons, Donald R.; Brass, Eric D.; Pencil, Eric (Technical Monitor)

    2001-01-01

    We present a scaled-down method for determining high temperatures using fiber-based Bragg gratings. Bragg gratings are distributed along the length of the optical fiber, and have high reflectivities whenever the optical wavelength is twice the grating spacing. These spatially distinct Bragg regions (located in the core of a fiber) are sensitive to local temperature changes. Since these fibers are silica-based they are easily affected by localized changes in temperature, which results in changes to both the grating spacing and the wavelength reflectivity. We exploit the shift in wavelength reflectivity to measure the change in the local temperature. Note that the Bragg region (sensing area) is some distance away from where the temperature is being measured. This is done so that we can measure temperatures that are much higher than the damage threshold of the fiber. We do this by affixing the fiber with the Bragg sensor to a material with a well-known coefficient of thermal expansion, and model the heat gradient from the region of interest to the actual sensor. The research described in this paper will culminate in a working device as well as be the second portion of a publication pending submission to Optics Letters.

  11. Study on focusing of hard x-radiation by combined Bragg-Fresnel lenses

    International Nuclear Information System (INIS)

    The program ZON is used to calculate the topology of zone plates focusing the source point into the image point. It allows to create combined lenses of different orders. Diffraction properties of x-ray optical elements are analyzed. Experimental results of x-radiation focusing by means of combined Bragg-Fresnel lenses calculated on 6, 10 and 14 keV, are presented. The spatial resolution for all lenses is 6 μm

  12. Results from a Bragg Curve Spectrometer

    International Nuclear Information System (INIS)

    The Bragg Curve Spectrometer (BCS) is an ionization chamber long enough to stop particles of interest. Particles enter through the cathode window and leave an ionization track parallel to the electric field. The ionization electrons drift through a Frisch grid and are collected on an anode. The anode current, as a function of time, is split and used as input for two amplifiers, one with a long integration time constant for energy measurement, and one with a short time constant to pick off the maximum ionization or Bragg peak. The Bragg peak, which is proportional to the nuclear charge, is used for particle identification. We have constructed and tested several versions of the BCS. The results are described

  13. Results from a Bragg curve spectrometer

    Science.gov (United States)

    Leach, D. D.; Davis, K. J.

    The Bragg Curve Spectrometer (BCS) is an ionization chamber long enough to stop particles of interest. Particles enter through the cathode window and leave an ionization track parallel to the electric field. The ionization electrons drift through a Frisch grid and are collected on an anode. The anode current, as a function of time, is split and used as input for two amplifiers, one with a long integration time constant for energy measurement, and one with a short time constant to pick off the maximum ionization or Bragg peak. The Bragg peak, which is proportional to the nuclear charge, is used for particle identification. Several versions of the BCS have been constructed and tested. The results are described.

  14. POLICRYPS-based electrically switchable Bragg reflector.

    Science.gov (United States)

    De Sio, Luciano; Tabiryan, Nelson; Bunning, Timothy J

    2015-12-14

    The formation and characterization of a switchable volume reflective element fabricated from a polymer liquid crystal (LC) polymer slice (POLICRYPS) structure by holographic photopolymerization at high temperature (65 °C) using a photosensitive/nematic liquid crystal prepolymer mixture is reported. The submicron Bragg structure formed consists of periodic continuous polymeric walls separated by periodic LC channels. The phase separated NLC self-aligns in a homeotropic alignment between the polymer walls as indicated by polarizing optical microscopy analysis (Maltese cross). The resulting periodic grating structure results in a Bragg reflection notch upon illumination with white light due to the periodic variation in refractive index. Electro-optical experiments realized through in-plane electrodes and temperature experiments confirm that the multilayer structure acts as a Bragg mirror whose reflection efficiency can be controlled by either a small (~3V/µm) electric field or temperature. PMID:26699059

  15. BRAGG-FRESNEL OPTICS AND SUPERMIRRORS

    OpenAIRE

    A. Erko; Vidal, B.

    1996-01-01

    The main principles and some applications of Bragg-Fresnel multilayer optics and X-ray supermirrors are described. An elliptical Bragg-Fresnel multilayer lens (BFML), designed and fabricated in the IMT RAS has been used for 2-dimensional focusing of the white X-ray synchrotron beam. For the beam energy of about 12 KeV the spot size checked with the knife edge method was about 1 mm. Applications of BFML and supermirrors in x-ray imaging are discussed.

  16. Sangac interferometer on the holographic bragg grating

    CERN Document Server

    Tikhonov, E A

    2015-01-01

    The ring interferometer with zero optical path difference known as Sagnac one is offered with a diffraction splitting of the entering light beam. As the beamsplitter, a transmission holographic Bragg grating is used. Conditions of normal operation of this interferometer achieve under the equal intensity of beam copies and the adjustable phase shift between them in its two interferometer shoulders. These conditions are met with the holographic grating, which provides the phase shift 180^0 on the central Bragg wavelength. Experimental approbation of the modified interferometer validates the expected results.

  17. A neural network for the Bragg synthetic curves recognition

    International Nuclear Information System (INIS)

    A ionization chamber was employed named Bragg curve spectroscopy. The Bragg peak amplitude is a monotone growing function of Z, which permits to identify elements through their measurement. A better technique for this measurement is to improve the use of neural networks with the purpose of the identification of the Bragg curve. (Author)

  18. Femtosecond laser pulse written Volume Bragg Gratings

    Directory of Open Access Journals (Sweden)

    Richter Daniel

    2013-11-01

    Full Text Available Femtosecond laser pulses can be applied for structuring a wide range of ransparent materials. Here we want to show how to use this ability to realize Volume-Bragg-Gratings in various- mainly non-photosensitive - glasses. We will further present the characteristics of the realized gratings and a few elected applications that have been realized.

  19. Modal analysis of Bragg onion resonators

    OpenAIRE

    Xu, Yong; Liang, Wei; Yariv, Amnon; Fleming, James G.; Lin, Shawn-Yu

    2004-01-01

    From analysis of the high Q modes in a Bragg onion resonator with an omnidirectional reflector cladding, we establish a close analogy between such a resonator and a spherical hollow cavity in perfect metal. We demonstrate that onion resonators are ideal for applications that require a large spontaneous-emission factor ß, such as thresholdless lasers and single-photon devices.

  20. Efficient iterative technique for designing bragg gratings

    DEFF Research Database (Denmark)

    Plougmann, Nikolai; Kristensen, Martin

    2004-01-01

    We present a new iterative method for designing Bragg gratings based on the Levenberg-Marquardt method of minimizing a chi-squared merit function. It is effective for designing both weak and strong gratings and is particularly well suited for unchirped gratings....

  1. Ground effects on magnetooptic Bragg cells

    Institute of Scientific and Technical Information of China (English)

    WEN Feng; WU BaoJian; QIU Kun

    2008-01-01

    Propagation equation of magnetostatic waves in an arbitrarily magnetized yttrium-iron-garnet/gadolinium-gallium-garnet waveguide coated with perfect metal planes is obtained using the method of the surface magnetic permeability. And ground effects on magnetooptic Bragg cells are investigated with the magnetooptic coupled-mode theory. Theoretical analysis indicates that, diffraction efficiency of guided optical waves can be improved by adjusting the spacing of the metal plane from the ferrite film, and ground effects on the diffraction efficiency will be enhanced using an appropriately tilted bias magnetic field. In the metal clad waveguide system, the magnetostatic wave frequency at which the diffraction efficiency peak is obtained corresponds to the "zero-dispersion" point. Performance of RF spectrum analyzers in this system can also be improved by comparing with the case of the sandwich waveguide. Therefore, magnetooptic Bragg cells with the metal clad waveguide are potential applications to the microwave communication and optical signal processing.

  2. Bragg Curve Counter for primary beam monitor

    International Nuclear Information System (INIS)

    The prototype Bragg Curve Counter (BCC) has been tested by α-source (241Am) with a continuous gas flow system (P-10: 90% Ar+10% CH4, at 300Torr). Two types of the Frisch grid were prepared for the BCC. One was made of expanded metal meshes, which consist of 175 meshes/inch2 with a 100μmt nickel sheet. The other was made of a 1mm pitch wire with φ 50 μm of the tungsten. The shape of Bragg peak signal was compared each other. It was found that the energy spectrum obtained by the wire grid is a little sharper than that obtained by the meshes grid. However the meshes grid is superior than the wire grid so far as handling and durability are concerned. (author)

  3. Application of Bragg-Fresnel lenses for microfluorescent analysis and microdiffraction

    International Nuclear Information System (INIS)

    In creating an X-ray superprobe, the main characteristics are the focus size and the number of photons collected in it (efficiency). In Bragg-Fresnel focusing elements, both characteristics are related to the minimum zone size. However, an increase in the efficiency can be achieved by creating compound elliptical zone plates. To analyze the operation of zone plates of different constructions, an effective program for calculating the image of a point source was developed. The main advantage of the program is a new method for the fast calculation of Kirchhoff integral, detailed description of which is presented in appendix A. The program allows to obtain a diffraction pattern from real lenses as well as to analyze their changes at different deviations of the lens position from the ideal position with respect to an incident X-ray beam. Different constructions of compound elliptical zone-plates designed on the base of the program and then fabricated are described in the work. The results of using a high-aperture Bragg-Fresnel lens for microfluorescent analysis and microdiffraction are presented. (orig.)

  4. Sampled phase-shift fiber Bragg gratings

    Institute of Scientific and Technical Information of China (English)

    Xu Wang(王旭); Chongxiu Yu(余重秀); Zhihui Yu(于志辉); Qiang Wu(吴强)

    2004-01-01

    A phase-shift fiber Bragg grating (FBG) with sampling is proposed to generate a multi-channel bandpass filter in the background of multi-channel stopbands. The sampled noire fiber gratings are analyzed by Fourier transform theory first, and then simulation and experiment are performed, the results show that transmission peaks are opened in every reflective channel, the spectrum shape of every channel is identical.It can be used to fabricate multi-wavelength distributed feedback (DFB) fiber laser.

  5. Study on position sensitive Bragg detector

    International Nuclear Information System (INIS)

    A position sensitive Bragg Curve Spectroscopy (PS-BCS) for heavy ion identification is introduced. The position signal is extracted via an auxiliary grid (P grid) between the anode and the Frisch grid. The position is determined by the wires. The charge division method have been used for position read-out. The test results of the detector with 252Cf α source have shown a position resolution ΔX<9 mm

  6. Improvement of soybean variety 'Bragg' through mutagenesis

    International Nuclear Information System (INIS)

    Full text: Variety 'Bragg' (Jackson x D49-2491) of soybean (Glycine max. (L.) Merrill) was found to be high yielding and widely adaptable throughout India. Its yield stability, however, is unsatisfactory, probably due to low germinability necessitating use of higher seed rate. With the main objective to rectify this defect, mutagenesis involving chemical as well as physical mutagens was used. Dry seeds were treated with EMS or MMS (0.2, 0.4 and 0.6%), or gamma rays (15, 20 and 25 kR) with and without additional exposure to UV (2 hrs at 260 nm) in 1982. In M2, a mutation frequency ranging from 2.24 to 22.85% was observed. Screening of M2 and of subsequent generations yielded a broad spectrum of mutations. Some of the mutants are agronomically useful. Among them, mutant 'T214' resulting from 25 kR gamma rays + UV, was found to possess better germinability (+15%), earliness (5 days) and high yield during both rainy and post-rainy seasons in 1986 and 1987, when compared with the parent variety 'Bragg'. The mutant has smaller seed-size (TGW 125 g) than the parent (145 g). In soybean, large-seeded varieties were reported to have poorer seed germinability. Thus, the better germinability of the mutant might be related to its reduced seed size. Seeds of the mutant show a light brown colour of the hilum in contrast to the black hilum of 'Bragg'. In other characters the mutant is similar to 'Bragg'. The mutant should have potential for commercial cultivation in India. For confirmation of its agronomically superior performance, it is undergoing national evaluation in multilocational trials under 'All India Co-ordinated Research Project on Soybean (ICAR)'. The strain has been named 'NRC-2'. (author)

  7. Fort Bragg Embraces Groundbreaking Heat Pump Technology

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-03-01

    The U.S. Army’s Fort Bragg partnered with the Department of Energy (DOE) to develop and implement solutions to build new, low-energy buildings that are at least 50% below Standard 90.1-2007 of the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE), the American National Standards Institute (ANSI), and the Illuminating Engineering Society of North America (IESNA) as part of DOE’s Commercial Building Partnerships (CBP) Program.

  8. Metal layer Bragg-Fresnel lenses for diffraction focusing of hard x-rays

    International Nuclear Information System (INIS)

    A thin-film Bragg-Fresnel lens (BFL) was developed for diffractive focusing of hard x-rays into submicron to nanometer spots for scanning x-ray spectromicroscopy. The lens is made of metal-layer Fresnel zones deposited on an x-ray reflective substrate. The use of a high-density lens structure reduces the thickness of the lens and simplifies the fabrication process. Linear and elliptical lenses made of a 200-nm-thick Au film were fabricated using e-beam lithography and a metal deposition process. The focusing capabilities of the Au layer BFLs were demonstrated at the Advanced Photon Source

  9. Fiber Bragg Grating Sensors for Harsh Environments

    Directory of Open Access Journals (Sweden)

    Stephen J. Mihailov

    2012-02-01

    Full Text Available Because of their small size, passive nature, immunity to electromagnetic interference, and capability to directly measure physical parameters such as temperature and strain, fiber Bragg grating sensors have developed beyond a laboratory curiosity and are becoming a mainstream sensing technology. Recently, high temperature stable gratings based on regeneration techniques and femtosecond infrared laser processing have shown promise for use in extreme environments such as high temperature, pressure or ionizing radiation. Such gratings are ideally suited for energy production applications where there is a requirement for advanced energy system instrumentation and controls that are operable in harsh environments. This paper will present a review of some of the more recent developments.

  10. Spatially Resolved Analysis of Bragg Selectivity

    Directory of Open Access Journals (Sweden)

    Tina Sabel

    2015-11-01

    Full Text Available This paper targets an inherent control of optical shrinkage in photosensitive polymers, contributing by means of spatially resolved analysis of volume holographic phase gratings. Point by point scanning of the local material response to the Gaussian intensity distribution of the recording beams is accomplished. Derived information on the local grating period and grating slant is evaluated by mapping of optical shrinkage in the lateral plane as well as through the depth of the layer. The influence of recording intensity, exposure duration and the material viscosity on the Bragg selectivity is investigated.

  11. Status of the OCS Bragg-Spectrometer for SODART

    DEFF Research Database (Denmark)

    Wiebicke, H.J.; Halm, I.; Christensen, Finn Erland; Rasmussen, Inga; Rasmussen, H.E.

    OCS, the Bragg spectrometer for the SODART X-ray telescope onboard the SPECTRUM-RONTGEN-GAMMA (SRG) satellite has been completed. Preliminary results of his performance are presented.......OCS, the Bragg spectrometer for the SODART X-ray telescope onboard the SPECTRUM-RONTGEN-GAMMA (SRG) satellite has been completed. Preliminary results of his performance are presented....

  12. Status of the OCS Bragg-Spectrometer for SODART

    DEFF Research Database (Denmark)

    Wiebicke, H.J.; Halm, I.; Christensen, Finn Erland;

    1998-01-01

    OCS, the Bragg spectrometer for the SODART X-ray telescope onboard the SPECTRUM-RONTGEN-GAMMA (SRG) satellite has been completed. Preliminary results of his performance are presented.......OCS, the Bragg spectrometer for the SODART X-ray telescope onboard the SPECTRUM-RONTGEN-GAMMA (SRG) satellite has been completed. Preliminary results of his performance are presented....

  13. Optical fibre Bragg grating recorded in TOPAS cyclic olefin copolymer

    DEFF Research Database (Denmark)

    Johnson, I.P.; Yuan, Scott Wu; Stefani, Alessio; Nielsen, Kristian; Rasmussen, Henrik K.; Khan, L.; Webb, D.J.; Kalli, K.; Bang, Ole

    2011-01-01

    A report is presented on the inscription of a fibre Bragg grating into a microstructured polymer optical fibre fabricated from TOPAS cyclic olefin copolymer. This material offers two important advantages over poly (methyl methacrylate), which up to now has formed the basis for polymer fibre Bragg...

  14. Fano resonances in integrated silicon Bragg reflectors for sensing applications.

    Science.gov (United States)

    Chang, Chia-Ming; Solgaard, Olav

    2013-11-01

    We investigate theoretically and experimentally Fano resonances in integrated silicon Bragg reflectors. These asymmetric resonances are obtained by interference between light reflected from the Bragg waveguide and from the end facet. The Bragg reflectors were designed and modeled using the 1D transfer matrix method, and they were fabricated in standard silicon wafers using a CMOS-compatible process. The results show that the shape and asymmetry of the Fano resonances depend on the relative phase of the reflected light from the Bragg reflectors and end facet. This phase relationship can be controlled to optimize the lineshapes for sensing applications. Temperature sensing in these integrated Bragg reflectors are experimentally demonstrated with a temperature sensitivity of 77 pm/°C based on the thermo-optic effect of silicon. PMID:24216944

  15. Research of fiber Bragg grating geophone based on cantilever beam

    Science.gov (United States)

    Wang, Liang; Chen, Shao-hua; Tao, Guo; Lu, Gui-wu; Zhao, Kun

    2009-07-01

    Along with the development of seismic exploration, the demand of frequency, dynamic range, precision and resolution ration is increased. However, the traditional geophone has disadvantages of narrower bandwidth, lower dynamic range and resolution, and cannot meet the new needs of seismic exploration. Geophone technology is a choke point, which constrains the development of petroleum prospecting in recent years. Fiber Bragg Grating seism demodulation technology is the newest kind of seism demodulation technology. The sensing probe of the Fiber Bragg Grating geophone is made up of Fiber Bragg Gating. The information which it collects is embodied by wavelength. The modulation-demodulation is accomplished by Fiber Bragg Gating geophone directly. In this paper, we design different size Fiber Bragg Grating geophones based on the transmission properties of Fiber Bragg Grating and cantilever beam method. Beryllium bronze and stainless steel are chosen as the elastic beam and shell materials, respectively. The parameters such as response function and sensitivity are given theoretically. In addition, we have simulated the transmission characteristics of Fiber Bragg Grating geophone by virtue of finite element analysis. The influences of wavelength, mass block, fiber length on the characteristics of geophones are discussed in detail, and finally the appropriate structural parameters are presented.

  16. Frequency shift of the Bragg and Non-Bragg backscattering from periodic water wave.

    Science.gov (United States)

    Wen, Biyang; Li, Ke

    2016-01-01

    Doppler effect is used to measure the relative speed of a moving target with respect to the radar, and is also used to interpret the frequency shift of the backscattering from the ocean wave according to the water-wave phase velocity. The widely known relationship between the Doppler shift and the water-wave phase velocity was deduced from the scattering measurements data collected from actual sea surface, and has not been verified under man-made conditions. Here we show that this ob- served frequency shift of the scattering data from the Bragg and Non-Bragg water wave is not the Doppler shift corresponding to the water-wave phase velocity as commonly believed, but is the water-wave frequency and its integral multiple frequency. The power spectrum of the backscatter from the periodic water wave consists of serials discrete peaks, which is equally spaced by water wave frequency. Only when the water-wave length is the integer multiples of the Bragg wave, and the radar range resolution is infinite, does the frequency shift of the backscattering mathematically equal the Doppler shift according to the water-wave phase velocity. PMID:27531469

  17. A ballistic motion disrupted by Bragg reflections

    CERN Document Server

    Clark, Jeremy Thane

    2012-01-01

    I study a Lindblad dynamics modeling a quantum test particle in a Dirac comb that collides with particles from a background gas. The main result is a homogenization theorem in a semi-classical limiting regime involving large mass for the test particle and a rescaling for the strength and period of the Dirac comb. Over the time interval considered, the particle would exhibit essentially ballistic motion if either the singular periodic potential or the kicks from the gas were removed. However, the particle behaves diffusively when both sources of forcing are present. The conversion of the motion from ballistic to diffusive is generated by occasional Bragg reflections that result when the test particle's momentum is driven through a collision near an element of the half-spaced reciprocal lattice of the Dirac comb.

  18. Fiber Bragg gratings for microwave photonics subsystems.

    Science.gov (United States)

    Wang, Chao; Yao, Jianping

    2013-09-23

    Microwave photonics (MWP) is an emerging filed in which photonic technologies are employed to enable and enhance functionalities in microwave systems which are usually very challenging to fulfill directly in the microwave domain. Various photonic devices have been used to achieve the functions. A fiber Bragg grating (FBG) is one of the key components in microwave photonics systems due to its unique features such as flexible spectral characteristics, low loss, light weight, compact footprint, and inherent compatibility with other fiber-optic devices. In this paper, we discuss the recent development in employing FBGs for various microwave photonics subsystems, with an emphasis on subsystems for microwave photonic signal processing and microwave arbitrary waveform generation. The limitations and potential solutions are also discussed. PMID:24104174

  19. Solgel grating waveguides for distributed Bragg reflector lasers.

    Science.gov (United States)

    Fardad, M A; Luo, H; Beregovski, Y; Fallahi, M

    1999-04-01

    Solgel grating waveguides and their application to the fabrication of external-cavity distributed Bragg reflector (DBR) lasers are demonstrated. A new composition of aluminosilicate material is developed for the fabrication of single-mode waveguides and Bragg reflectors. An average loss of <0.2 dB/cm is measured in the single-mode waveguides at 1550 nm. The reflectors show filtering greater than 97% near 1530 nm, with a bandwidth of ~0.6 nm . The Bragg reflectors are used as feedback resonators for DBR lasers. Single-mode lasing with a sidemode suppression of better than 25 dB is demonstrated. PMID:18071539

  20. Modeling Component-based Bragg gratings Application: tunable lasers

    Directory of Open Access Journals (Sweden)

    Hedara Rachida

    2011-09-01

    Full Text Available The principal function of a grating Bragg is filtering, which can be used in optical fibers based component and active or passive semi conductors based component, as well as telecommunication systems. Their ideal use is with lasers with fiber, amplifiers with fiber or Laser diodes. In this work, we are going to show the principal results obtained during the analysis of various types of grating Bragg by the method of the coupled modes. We then present the operation of DBR are tunable. The use of Bragg gratings in a laser provides single-mode sources, agile wavelength. The use of sampled grating increases the tuning range.

  1. X-ray diffraction at Bragg angles around π/2

    International Nuclear Information System (INIS)

    X-ray diffraction at Bragg angles around π/2 is studied from the theoretical and experimental points of view. The proposed corrections to the dynamical theory in the θβ ≅ π/2 cases, has been reviewed showing the equivalence between two formalisms leading to a corrected expression for the dependence of the angular parameter y with the angle of incidence. An expression for y valid in the conventional and θ β ≅ π/2 cases has been obtained. A general expression for Bragg law and for energy resolution after a Bragg diffraction was also deduced. (author)

  2. Thermally tunable integrated planar Bragg-grating stabilized diode laser

    Science.gov (United States)

    Lynch, S. G.; Gates, J. C.; Berry, S. A.; Holmes, C.; Smith, P. G. R.

    2015-03-01

    A pair of external cavity diode lasers are fabricated using an integrated planar Bragg grating. The planar waveguide and Bragg reflector is UV-written within a glass-on-silicon chip. Intensity isolated, continuous wavelength tuning at > 1kHz modulation rate is acheived using micro-heating elements fabricated directly over the Bragg grating. Low RIN (<140dB) and low linewidth (δν ~ 200 kHz) operation is found using a heterodyne measurement. We demonstrate the lasers operating in phase-locked loop configuration where one laser is frequency-offset locked to the other.

  3. Dispersion blue-shift in an aperiodic Bragg reflection waveguide

    Science.gov (United States)

    Fesenko, Volodymyr I.; Tuz, Vladimir R.

    2016-04-01

    A particular feature of an aperiodic design of cladding of Bragg reflection waveguides to demonstrate a dispersion blue-shift is elucidated. It is made on the basis of a comparative study of dispersion characteristics of both periodic and aperiodic configurations of Bragg mirrors in the waveguide system, wherein for the aperiodic configuration three procedures for layers alternating, namely Fibonacci, Thue-Morse and Kolakoski substitutional rules are considered. It was found out that, in a Bragg reflection waveguide with any considered aperiodic cladding, dispersion curves of guided modes appear to be shifted to shorter wavelengths compared to the periodic configuration regardless of the modes polarization.

  4. Dispersion blue-shift in an aperiodic Bragg reflection waveguide

    CERN Document Server

    Fesenko, Volodymyr I

    2016-01-01

    A particular feature of an aperiodic design of cladding of Bragg reflection waveguides to demonstrate a dispersion blue-shift is elucidated. It is made on the basis of a comparative study of dispersion characteristics of both periodic and aperiodic configurations of Bragg mirrors in the waveguide system, wherein for the aperiodic configuration three procedures for layers alternating, namely Fibonacci, Thue-Morse and Kolakoski substitutional rules are considered. It was found out that, in a Bragg reflection waveguide with any considered aperiodic cladding, dispersion curves of guided modes appear to be shifted to shorter wavelengths compared to the periodic configuration regardless of the modes polarization.

  5. Resonantly enhanced Bragg-scattering spectroscopy of an atomic transition

    Science.gov (United States)

    Yang, Xudong; Qiao, Cuifang; Li, Chuanliang; Chen, Fenghua

    2016-07-01

    A novel resonantly enhanced Bragg-scattering (REBS) spectroscopy from a population difference grating (PDG) is reported. The PDG is formed by a standing-wave (SW) pump field, which periodically modulates the space population distributions of two levels in the 87Rb D1 line. Then, a probe beam, having identical frequency and orthogonal polarization with the SW pump field, is Bragg-scattered by the PDG. The research achievement shows that the Bragg-scattered light is strongest at an atomic transition, and forms an REBS spectrum with a high signal-to-noise ratio and sub-natural linewidth. The observed REBS can be applied in precise frequency measurements.

  6. The Bragg Crystal Spectrometer for AXAF

    International Nuclear Information System (INIS)

    MIT's High Resolution X-ray Spectroscopy investigation on AXAF involves two complementary dispersive instruments, a Bragg Crystal Spectrometer (BCS) and a High Energy Transmission Grating Spectrometer (HETGS). The overall goal of the investigation is to study the physical conditions in celestial sources by means of detailed measurements of their X-ray spectra. High spectral resolution measurements can be used to perform diagnostics of emitting and absorbing matter, leading to knowledge of temperature, ionization state, elemental abundance, density and optical depth. The Bragg Crystal Spectrometer gives resolving powers of 200-2000 over the energy band 0.5-8 keV and resolving powers of 50-70 over 0.14-0.5 keV. The effective collecting areas in a typical scanning observation are 4-60 cm/sup 2/, and the minimum detectable line flux is 4-30 X 10/sup -6/ photons cm/sup -2/ s/sup -1/. The BCS will be located at the AXAF focal plane. The instrument consists of 10 curved diffractors each of which has a quasi-toroidal geometry, two types of imaging proportional counters optimized for low background (one sealed and one flow), an internal monitor counter that can be inserted into the beam to measure total source flux, a mechanical system that maintains Rowland circle geometry and an appropriate command and data system. The BCS is an upgraded and improved version of the Focal Plane Crystal Spectrometer flown on the Einstein Observatory. It will be used to measure the strengths of individual lines from both point and extended objects in order to apply plasma diagnostic techniques to the study of cosmic X-ray sources

  7. UV writing of advanced Bragg gratings in optical waveguides

    DEFF Research Database (Denmark)

    Jensen, Jesper Bo Damm

    2002-01-01

    The subject of this ph.d. thesis is the fabrication of Bragg gratings in optical waveguides. During the study Bragg gratings were written in both planar waveguides and optical fibers using pulsed or continuous-wave lasers operating in the ultraviolet (UV) range. The main result is the development...... half the periodicity of the index modulation profile in the Bragg grating. A phase shift in the grating is realized by shifting the UV irradiance from one polarization to the other during the grating inscription. The amplitude of the modulation can also be varied continuously by changing the ration...... phase shifts were then translated into a polarizer angle profile and the Bragg grating were written using a pulsed excimer laser. Only optical fibers were used in this part of the thesis. The high quality planar waveguides used during the study were produced in the cleanroom facility at the...

  8. Observation of sub-Bragg diffraction of waves in crystals

    CERN Document Server

    Huisman, Simon R; Hartsuiker, Alex; Woldering, Léon A; Mosk, Allard P; Vos, Willem L

    2011-01-01

    We investigate the diffraction conditions and associated formation of stopgaps for waves in crystals with different Bravais lattices. We identify a prominent stopgap in high-symmetry directions that occurs at a frequency below the ubiquitous first-order Bragg condition. This sub-Bragg diffraction condition is demonstrated by reflectance spectroscopy on two-dimensional photonic crystals with a centred rectangular lattice, revealing prominent diffraction peaks for both the sub-Bragg and first-order Bragg condition. These results have implications for wave propagation in 2 of the 5 two-dimensional Bravais lattices and 7 out of 14 three-dimensional Bravais lattices, such as centred rectangular, triangular, hexagonal and body-centred cubic.

  9. Bragg Reflection of Waves by Different Shapes of Artificial Bars

    Institute of Scientific and Technical Information of China (English)

    许泰文; 张宪国; 蔡立宏

    2002-01-01

    Experiments are performed in a wave flume to demonstrate the Bragg reflection of linear gravity waves by artificialbars. Three different artificial bars with rectangular, triangular and rectified cosinoidal shapes are placed discretely on theseabed for measurement of the Bragg reflection. A series of experimental conditions including the number of bars, the pe-riodic bar spacing, the water depth and various wave conditions are tested. Key parameters influencing the Bragg reso-nances are investigated. The experimental data are compared with the values from both theoretical and numerical models.Some key parameters have proved to be effective in describing the primary resonances. Predictive equations of the charac-teristics for the Bragg reflection are proposed in this paper.

  10. Bragg-Fresnel optics: New field of applications

    International Nuclear Information System (INIS)

    Bragg-Fresnel Optics shows excellent compatibility with the third generation synchrotron radiation sources such as ESRF and is capable of obtaining monochromatic submicron focal spots with 108-109 photons/sec in an energy bandwidth of 10-4-10-6 and in a photon energy range between 2-100 keV. New types of Bragg-Fresnel lenses like modified, ion implanted, bent and acoustically modulated were tested. Microprobe techniques like microdiffraction and microfluorescence based on Bragg-Fresnel optics were realised at the ESRF beamlines. Excellent parameters of the X-ray beam at the ESRF in terms of low emittance and quite small angular source size allow for Bragg-Fresnel optics to occupy new fields of applications such as high resolution diffraction, holography, interferometry and phase contrast imaging

  11. Structural Health Monitoring Using Fiber Bragg Grating Sensor Matrix Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Fiber Bragg Grating had been identified as very important elements, especially for strain measurements in smart structures. In many applications, arrays of FBG...

  12. Bragg-Fresnel optics: New field of applications

    Energy Technology Data Exchange (ETDEWEB)

    Snigirev, A. [ESRF, Grenoble (France)

    1997-02-01

    Bragg-Fresnel Optics shows excellent compatibility with the third generation synchrotron radiation sources such as ESRF and is capable of obtaining monochromatic submicron focal spots with 10{sup 8}-10{sup 9} photons/sec in an energy bandwidth of 10{sup -4}-10{sup -6} and in a photon energy range between 2-100 keV. New types of Bragg-Fresnel lenses like modified, ion implanted, bent and acoustically modulated were tested. Microprobe techniques like microdiffraction and microfluorescence based on Bragg-Fresnel optics were realised at the ESRF beamlines. Excellent parameters of the X-ray beam at the ESRF in terms of low emittance and quite small angular source size allow for Bragg-Fresnel optics to occupy new fields of applications such as high resolution diffraction, holography, interferometry and phase contrast imaging.

  13. The localized surface plasmon resonances based on a Bragg reflector

    Science.gov (United States)

    Wang, Jie; Liu, Yumin; Yu, Zhongyuan; Ye, Chunwei; Lv, Hongbo; Shu, Changgan

    2014-09-01

    In this paper, we present the theoretical analysis on how the wavelength of the localized surface plasmon resonances of gold nanoparticle can lead shift for the resonance wavelength. In our results, we calculate the scattering cross-section, the absorption cross-section and the field enhancement due to the nanoparticle. Numerical simulation were done using the finite element method (FEM). The work that we do here is different from the previous work because we use the Bragg reflector as a substrate. The Bragg reflector has a property of high reflectivity in some certain frequency bandwidth because of its periodic structure. The coherence interference of the Bragg reflector contributes to the plasmon resonances and results in some special character for a wide variety application, from sensing to photovoltaic. The periodic number of the Bragg reflector substrate and shapes of the nanoparticles are also discussed that result in a shift of the resonance wavelength.

  14. Time/Wavelength Fiber Bragg Grating Multiplexing Sensor Array

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    A novel time/wavelength-multiplexed fiber Bragg grating sensor array is presented. This type of sensor array has the advantages of more points for multi-point measurement, simple structure and low cost.

  15. Fibre Bragg Grating Components for Filtering, Switching and Lasing

    OpenAIRE

    Yu, Zhangwei

    2008-01-01

    Fibre Bragg gratings (FBGs) are key components for a vast number of applications in optical communication systems, microwave photonics systems, and optical sensors, etc. The main topic of this thesis is fibre Bragg grating fabrication and applications in direct microwave optical filtering, high speed switching and switchable dual-wavelength fibre lasers. First, a brief overview is given about the photosensitivity in optical fibre, basic FBG fabrication techniques, the popular coupled-mode the...

  16. Photonic scanning receiver using an electrically tuned fiber Bragg grating.

    Science.gov (United States)

    Rugeland, P; Yu, Z; Sterner, C; Tarasenko, O; Tengstrand, G; Margulis, W

    2009-12-15

    A 5-cm-long electrically tuned fiber Bragg grating is used to filter a microwave signal on an optical carrier at 1.55 mum. A chirped distributed-feedback structure is employed, with a transmission bandwidth of 54 MHz and relative optical carrier rejection of >30 dB for rf frequencies >2 GHz. The rapid monotonic sweep of the Bragg wavelength is translated into a fast-frequency sweep for rf analysis. PMID:20016616

  17. Writing Bragg Gratings in Multicore Fibers.

    Science.gov (United States)

    Lindley, Emma Y; Min, Seong-Sik; Leon-Saval, Sergio G; Cvetojevic, Nick; Lawrence, Jon; Ellis, Simon C; Bland-Hawthorn, Joss

    2016-01-01

    Fiber Bragg gratings in multicore fibers can be used as compact and robust filters in astronomical and other research and commercial applications. Strong suppression at a single wavelength requires that all cores have matching transmission profiles. These gratings cannot be inscribed using the same method as for single-core fibers because the curved surface of the cladding acts as a lens, focusing the incoming UV laser beam and causing variations in exposure between cores. Therefore we use an additional optical element to ensure that the beam shape does not change while passing through the cross-section of the multicore fiber. This consists of a glass capillary tube which has been polished flat on one side, which is then placed over the section of the fiber to be inscribed. The laser beam enters the fiber through the flat surface of the capillary tube and hence maintains its original dimensions. This paper demonstrates the improvements in core-to-core uniformity for a 7-core fiber using this method. The technique can be generalized to larger multicore fibers. PMID:27167576

  18. Dynamic fiber Bragg grating sensing method

    Science.gov (United States)

    Ho, Siu Chun Michael; Ren, Liang; Li, Hongnan; Song, Gangbing

    2016-02-01

    The measurement of high frequency vibrations is important in many scientific and engineering problems. This paper presents a novel, cost effective method using fiber optic fiber Bragg gratings (FBGs) for the measurement of high frequency vibrations. The method uses wavelength matched FBG sensors, with the first sensor acting as a transmission filter and the second sensor acting as the sensing portion. Energy fluctuations in the reflection spectrum of the second FBG due to wavelength mismatch between the sensors are captured by a photodiode. An in-depth analysis of the optical circuit is provided to predict the behavior of the method as well as identify ways to optimize the method. Simple demonstrations of the method were performed with the FBG sensing system installed on a piezoelectric transducer and on a wind turbine blade. Vibrations were measured with sampling frequencies up to 1 MHz for demonstrative purposes. The sensing method can be multiplexed for use with multiple sensors, and with care, can be retrofitted to work with FBG sensors already installed on a structure.

  19. First order Bragg grating filters in silicon on insulator waveguides

    Science.gov (United States)

    Waugh, Peter Michael

    2008-08-01

    The subject of this project is the design; analysis, fabrication and characterisation of first order Bragg Grating optical filters in Silicon-on-Insulator (SOI) planar waveguides. It is envisaged that this work will result in the possibility of Bragg Grating filters for use in Silicon Photonics. It is the purpose of the work to create as far as is possible flat surface waveguides so as to facilitate Thermo-Optic tuning and also the incorporation into rib-waveguide Silicon Photonics. The spectral response of the shallow Bragg Gratings was modelled using Coupled Mode Theory (CMT) by way of RSoft Gratingmod TM. Also the effect of having a Bragg Grating with alternate layers of refractive index of 1.5 and 3.5 was simulated in order to verify that Silica and Silicon layered Bragg Gratings could be viable. A series of Bragg Gratings were patterned on 1.5 micron SOI at Philips in Eindhoven, Holland to investigate the variation of grating parameters with a) the period of the gratings b) the mark to space ratio of the gratings and c) the length of the region converted to Bragg Gratings (i.e. the number of grating period repetitions). One set of gratings were thermally oxidised at Philips in Eindhoven and another set were ion implanted with Oxygen ions at the Ion Beam Facility, University of Surrey, England. The gratings were tested and found to give transmission minima at approximately 1540 nanometres and both methods of creating flat surfaces were found to give similar minima. Atomic Force Microscopy was applied to the grating area of the as-implanted samples in the Advanced Technology Institute, University of Surrey, which were found to have surface undulations in the order of 60 nanometres.

  20. Fabrication and optical characterization of Bragg resonance luminescence porous silicon

    Science.gov (United States)

    Park, Mi-Ae; Sohn, Honglae

    2016-01-01

    The synthesis and characterization of Bragg resonance luminescence porous silicon (BRL PS) exhibiting both optical reflectivity and strong narrow visible photoluminescence (PL) prepared from highly doped n-type silicon wafers through the electrochemical etching are reported. BRL PS showing the luminescence at 702 nm with an excitation wavelength of 400 nm was prepared by applying the current of 360 mA cm-2 for 1.6 s and 75 mA cm-2 for 3.6 s with 50 repeats in etching solution of 1:1 volume mixture of absolute ethanol and aqueous 48% HF. BRL PS exhibited sharp PL peak which reached full width at half maximum of 14 nm, originated from the result of Bragg resonance in PS multilayer. The sharp PL peak at 702 nm of BRL PS is the second-order transmitted luminescence peak by Bragg resonance phenomenon. The simultaneous measurement of reflectivity and luminescence in the BRL PS under an exposure to a vapor flux of acetone showed that a narrow transmitted luminescence based on Bragg resonance in BRL PS quenched as well as the red-shifted by 37 nm of reflection wavelength was observed. A dramatic quenching PL of BRL PS compare to that of the monolayer PS, is probably due to the Bragg resonance effect on luminescence.

  1. ''Experimental and theoretical study of bragg-Fresnel optics etched on multilayer structures. Application: lenses for X-Ray imaging''

    International Nuclear Information System (INIS)

    This work concerns the study of a new type of X-ray focusing optics known as Bragg-Fresnel lenses developed for imaging in the X and X-UV range. These optics, etched on multilayer structure, combine the focusing properties of zone plate with the Bragg reflection of multilayer used like support. Using synchrotron sources and a plasma source produced by a laser, we tested the efficiency and the spatial resolution of these lenses. With a monochromatic beam, we first obtained the image of a object by using the first order diffraction of an elliptical off-axis Bragg-Fresnel lens. By using only one part of a lens, the superposition of different diffraction orders in focal plane can be avoided, thus improving the image contrast. In order to evaluate the chromatic aberrations of these lenses, we have summed on the same image, three exposures at different energies in the band pass of the multilayer. To reduce these kind of aberrations, we used a system composed of two off-axis lenses. To simplify the alignment, we tested an elliptical off-axis lens associated with a lamellar grating. Thus we are able to validate the theoretical approximation of an off-axis Bragg-Fresnel lens to a variable spaced grating. Finally, to show the perturbation brought by the zeroth order, we successively imaged a laser plasma source with a centred and an off-axis elliptical lenses. As with the synchrotron source, a set of images of a test object enabled us to improve the spatial resolution. (author)

  2. Temperature Compensation for Double Fiber Bragg Grating Sensors

    Institute of Scientific and Technical Information of China (English)

    WANG Chun-cheng; LIU Jia; ZHENG Jian-bang

    2006-01-01

    A novel double fiber Bragg grating(FBG) strain sensor configuration is presented. Temperature compensation method is based on double FBG moored on a rhombus frame. Through the theoretical analysis,the relation between relative shift of Bragg wavelength and the strain applied on the sensor is obtained,and the analytical expression of strain sensitivity coefficient is also given. The experiment results show that:in the strain range of 0~0.8 mm,the relation between the relative shift of Bragg wavelength and applied strain is linear,and the dispersion of double FBG wavelength at the range of -25 ℃~60 ℃ is 0~0.002 nm. The strain sensitivity of the displacement sensor configuration is 0.171 nm/με,and is nearly twice than that of single FC sensor.

  3. Performance of a Bragg curve detector for heavy ion identification

    International Nuclear Information System (INIS)

    By using Bragg curve spectroscopy, one can measure atomic number and energy of high energy heavy ions stopping in a gas-filled ionization chamber with longitudinal electric field. In this paper, we report on the results obtained with an isobutane filled detector. An energy resolution of 0.8% fwhm and a Z resolution of 2.7% fwhm were achieved for elastically scattered 300 MeV 40Ar ions. We study the Bragg peak amplitude dependence on the energy of the incoming ions, a dependence presumably due to the Frisch grid screening inefficiency. The corrected Bragg peak spectrum of inelastically scattered 300 MeV 40Ar ions exhibits a satisfactory Z separation around Z = 18. (orig.)

  4. Performance of a Bragg curve detector for heavy ion identification

    Science.gov (United States)

    Asselineau, J. M.; Duchon, J.; L'Haridon, M.; Mosrin, P.; Regimbart, R.; Tamain, B.

    1982-12-01

    By using Bragg curve spectroscopy, one can measure atomic number and energy of high energy heavy ions stopping in a gas-filled ionization chamber with longitudinal electric field. In this paper, we report on the results obtained with an isobutane filled detector. An energy resolution of 0.8% fwhm and a Z resolution of 2.7% fwhm were achieved for elastically scattered 300 MeV 40Ar ions. We study the Bragg peak amplitude dependence on the energy of the incoming ions, a dependence presumably due to the Frisch grid screening inefficiency. The corrected Bragg peak spectrum of inelastically scattered 300 MeV 40Ar ions exhibits a satisfactory Z separation around Z=18.

  5. Flexible nanofiber-coupled hybrid plasmonic Bragg grating.

    Science.gov (United States)

    Liu, Sheng; Zhou, Linjie; Xu, Jian; Wang, Xinyi; Chen, Jianping

    2016-05-01

    We report a hybrid plasmonic Bragg grating composed of a nanofiber coupled with orthogonally oriented metal strips. Numerical simulations are performed to study the transmission and reflection spectra of the grating. It shows that the TM polarization has much stronger Bragg reflection due to the excitation of hybrid plasmonic modes. The dependence of reflection peaks on several key device parameters is analyzed. Light propagation simulation further reveals that both fundamental and first-order TM modes are excited upon Bragg reflection, leading to two separate peaks in the spectrum. We implement the prototype device by attaching a nanofiber onto the surface of an array of sub-micrometer-wide metal strips. The main reflection peak is measured to have a 3-dB bandwidth of 15 nm and out-of-band rejection of more than 30 dB. The effects of nanofiber radius, alignment angle and coupling length on the device performance are also experimentally investigated. PMID:27137547

  6. Tunable plasmonic Bragg reflector with different graphene nanoribbon widths

    Science.gov (United States)

    Zhuang, Huawei; Kong, Fanmin; Li, Kang; Sheng, Shiwei

    2015-09-01

    We propose and numerically analyze a Bragg reflector composed of periodically arranged graphene nanoribbon waveguides with different widths. Because of the unique property of the graphene edge mode, the effective index contrast used for the reflector can be obtained by designing graphene nanoribbons with different widths without changing the dielectric substrate structure. Good band stop filtering characteristics are shown at the band gap of the transmission spectrum by numerical simulation. The performance of the proposed Bragg reflector is analyzed in terms of different parameters, such as the chemical potential, the number of periods, and the size of the unit cell. The proposed Bragg reflector will be expected to have important potential applications in the highly integrated SPP-based photonic devices.

  7. A plating method for metal coating of fiber Bragg grating

    Institute of Scientific and Technical Information of China (English)

    Yulong Li; Hua Zhang; Yan Feng; Gang Peng

    2009-01-01

    We present a method for metal coating optical fiber and in-fiber Bragg grating. The technology process which is based on electroless plating and electroplating method is described in detail. The fiber is firstly coated with a thin copper or nickel plate with electroless plating method. Then, a thicker nickel plate is coated on the surface of the conductive layer. Under the optimum conditions, the surfaces of chemical plating and electroplating coatings are all smooth and compact. There is no visible defect found in the cross-section. Using this two-step metallization method, the in-fiber Bragg grating can be well protected and its thermal sensitivity can be enhanced. After the metallization process, the fiber sensor is successfully embedded in the 42CrMo steel by brazing method. Thus a smart metal structure is achieved. The embedding results show that the plating method for metallization protection of in-fiber Bragg grating is effective.

  8. Holographic Bragg gratings: measurements and examination diffraction parameters

    CERN Document Server

    Tikhonov, E A

    2015-01-01

    Measurement and analysis of diffraction parameters of thick transmission holographic phase gratings recorded on PHC-488 photopolymer are presented. Precision determination of the spatial grating period is executed by Bragg angle measurement for two precisely known wavelengths in the first diffraction order and also by Bragg angle measurement on one wavelength in the first and second diffraction orders. Determination of actual grating thickness and depths of spatial modulation of a holographic recording, which are responsible for their main optical characteristics, is carried out with the application of H. Kogelnik 2-wave coupled model. Calculated and experimental Bragg angles in two orthogonal orientated planes of linear polarized laser light were used to confirm theoretical model with experimental results. Extreme values of the diffraction parameters, efficiency and spectral resolution, important for holographic phase grating applications are analyzed.

  9. BRAGG-PEAK LOCATION EMPLOYING A MAXIMUM-ENTROPY FORMALISM

    OpenAIRE

    Lehmann, M.; Robinson, T.; Wilkins, S.

    1986-01-01

    The maximum entropy method has been tried on simulated data from a small 2-dimensional position-sensitive detector. Constraints were introduced to account for smoothness and the fact that only one peak was found within the frame of the recording. Analysis of a large number of weak Bragg peaks with I/σ(I) < 9 and of different size and background showed the method to give virtually bias-free results. The computing time is sufficiently low to allow real time use on measurements of a single Bragg...

  10. Temperature sensor based on dual fiber Bragg gratings

    OpenAIRE

    Ekestam, Henrik; Larsson, Jim

    2015-01-01

    The objective of the project was to examine if it was possible to develop a low-cost temperature sensor using dual fiber Bragg gratings (FBGs). The intention was to use one FBG as a reference and let the other FBG function as the sensor. The study shows that it is possible to characterize the temperature sensitivity of each FBG and use the reference to sweep over the applicable spectrum to find the Bragg-wavelength of the sensor. This could be done measuring only the total intensity instead o...

  11. A novel optical filter of fiber Bragg grating

    Institute of Scientific and Technical Information of China (English)

    LI; Xiaolu; JIANG; Yuesong

    2006-01-01

    A theory of a novel optical filter of drawing the fiber Bragg grating by the heated elastic sheet is advanced. Based on the heat conduction equation, a set of functions of temperature and thermal expansion on the heated elastic sheet are calculated. And the most displacement of the heated elastic sheet is also described. Finally the expression of the reflected Bragg wavelength deviation in terms of the thermal power density of heat-source is deduced. The physics feasibility of these conclusions mentioned above is proved. It is a potential value for the novel optical filter to research.

  12. Bridge pier scour measurement by means of Bragg grating arrays

    Directory of Open Access Journals (Sweden)

    Manzoni S.

    2010-06-01

    Full Text Available This paper deals with a new method to measure scour level at bridge piers. The proposed technique is based on an array of Bragg grating temperature sensors, heated by an electrical circuit. The Bragg gratings in water sense a lower temperature than those buried in the river bed, because of the different heat scattering principles in the two situations. Furthermore the response of each sensor is slower if it is buried in the bed, with respect to the case it is in water. The paper presents laboratory tests, showing the method effectiveness and reliability, and it explains the advantages with respect to other more traditional methodologies to measure scour level.

  13. Bragg grating chemical sensor with hydrogel as sensitive element

    Institute of Scientific and Technical Information of China (English)

    Xiaomei Liu(刘小梅); Shilie Zheng(郑史烈); Xianmin Zhang(章献民); Jun Cong(丛军); Kangsheng Chen(陈抗生); Jian Xu(徐坚)

    2004-01-01

    A novel fiber Bragg grating (FBG) based chemical sensor using hydrogel, a swellable polymer, as sensitive element is demonstrated. The sensing mechanism relies on the shift of Bragg wavelength due to the stress resulted from volume change of sensitive swellable hydrogel responding to the change of external environment. A polyacrylamide hydrogel fiber grating chemical sensor is made, and the experiments on its sensitivity to the salinity are performed. The sensitivity is low due to the less stress from the shrinking or swelling of hydrogels. Reducing the cross diameter of the grating through etching with hydrofluoric acid can greatly improve the sensitivity of the sensor.

  14. Measurement of distributed strain and temperature based on higher order and higher mode Bragg conditions

    Science.gov (United States)

    Sirkis, James S. (Inventor); Sivanesan, Ponniah (Inventor); Venkat, Venki S. (Inventor)

    2001-01-01

    A Bragg grating sensor for measuring distributed strain and temperature at the same time comprises an optical fiber having a single mode operating wavelength region and below a cutoff wavelength of the fiber having a multimode operating wavelength region. A saturated, higher order Bragg grating having first and second order Bragg conditions is fabricated in the optical fiber. The first order of Bragg resonance wavelength of the Bragg grating is within the single mode operating wavelength region of the optical fiber and the second order of Bragg resonance wavelength is below the cutoff wavelength of the fiber within the multimode operating wavelength region. The reflectivities of the saturated Bragg grating at the first and second order Bragg conditions are less than two orders of magnitude of one another. In use, the first and second order Bragg conditions are simultaneously created in the sensor at the respective wavelengths and a signal from the sensor is demodulated with respect to each of the wavelengths corresponding to the first and second order Bragg conditions. Two Bragg conditions have different responsivities to strain and temperature, thus allowing two equations for axial strain and temperature to be found in terms of the measure shifts in the primary and second order Bragg wavelengths. This system of equations can be solved for strain and temperature.

  15. Rational solitons in deep nonlinear optical Bragg grating

    NARCIS (Netherlands)

    Alatas, H.; Iskandar, A.A.; Tjia, M.O.; Valkering, T.P.

    2006-01-01

    We have examined the rational solitons in the Generalized Coupled Mode model for a deep nonlinear Bragg grating. These solitons are the degenerate forms of the ordinary solitons and appear at the transition lines in the parameter plane. A simple formulation is presented for the investigation of the

  16. The Wavelength Shifting and Temperature Athermalization of Fiber Bragg Grating

    Institute of Scientific and Technical Information of China (English)

    Yu; e; Kong

    2003-01-01

    The wavelength shifting properties and the temperature athermalization technology of fiber Bragg grating (FBG) were studied in this paper, and then two different athermalization methods were introduced. The research shows that FBG with athermalization by applying the substrate with negative coefficient of thermal expansion is effective and can be used in many fields.

  17. A Bragg curve ionization chamber for acceleration mass spectrometry

    International Nuclear Information System (INIS)

    An ionization chamber based on the Bragg curve spectrometry method to be used as the final detector in a accelerator mass spectrometry system is described. The first tests with a Cl beam give energy resolution of 1% and Z resolving power of 72 at Z=17

  18. A highly sensitive fiber Bragg grating diaphragm pressure transducer

    Science.gov (United States)

    Allwood, Gary; Wild, Graham; Lubansky, Alex; Hinckley, Steven

    2015-10-01

    In this work, a novel diaphragm based pressure transducer with high sensitivity is described, including the physical design structure, in-depth analysis of optical response to changes in pressure, and a discussion of practical implementation and limitations. A flat circular rubber membrane bonded to a cylinder forms the body of the transducer. A fiber Bragg grating bonded to the center of the diaphragm structure enables the fractional change in pressure to be determined by analyzing the change in Bragg wavelength of the reflected spectra. Extensive evaluation of the physical properties and optical characteristics of the transducer has been performed through experimentation, and modeling using small deformation theory. The results show the transducer has a sensitivity of 0.116 nm/kPa, across a range of 15 kPa. Ultra-low cost interrogation of the optical signal was achieved through the use of an optically mismatched Bragg grating acting as an edge filter to convert the spectral change into an intensity change. A numerical model of the intensity based interrogation was implemented in order to validate the experimental results. Utilizing this interrogation technique and housing both the sensing and reference Bragg gratings within the main body of the transducer means it is effectively temperature insensitive and easily connected to electronic systems.

  19. Ultrafast Laser Fabrication of Bragg Waveguides in GLS Chalcogenide Glass

    Directory of Open Access Journals (Sweden)

    McMillen Ben

    2013-11-01

    Full Text Available We present work on the fabrication of Bragg waveguides in gallium-lanthanum-sulfide chalcogenide glass using an ultrafast laser. Waveguides were written with a single pass while modulating the writing beam. The spatial and temporal profile of the writing beam was ontrolled during waveguide fabrication in order to control the shape and size of the waveguide cross-section.

  20. Crystal clear the autobiographies of Sir Lawrence and Lady Bragg

    CERN Document Server

    Thomson, Patience

    2015-01-01

    The main body of this book contains the hitherto unpublished autobiographies of both William Lawrence Bragg, an innovative scientist who won the Nobel Prize for Physics in 1915, and his wife, Alice, a Mayor of Cambridge and National Chairman of Marriage Guidance. Their autobiographies give unusual insights into the lives and times of two distinguished people and the real personalities behind their public appearance.

  1. Linearized Bragg grating assisted electro-optic modulator.

    Science.gov (United States)

    Khurgin, Jacob B; Morton, Paul A

    2014-12-15

    We propose a new linearized electro-optic modulator in which linearization is achieved by modulating the index of a Bragg grating reflector placed in the arm(s) of a Michelson Interferometer. This grating-assisted Michelson (GAMI) modulator can operate as either an intensity or amplitude modulator, and is shown to significantly improve the linearity of microwave photonics links. PMID:25503037

  2. Growth and characterization of nitride-based distributed Bragg reflectors

    Energy Technology Data Exchange (ETDEWEB)

    Kruse, Carsten; Dartsch, Heiko; Aschenbrenner, Timo; Figge, Stephan; Hommel, Detlef [Section Semiconductor Epitaxy, Institute of Solid State Physics, University of Bremen (Germany)

    2011-08-15

    We report on a systematic study concerning the realization of nitride-based distributed Bragg reflectors (DBRs) for opto-electronic applications in the near-UV to visible spectral range. Different material combinations are used in order to find an optimized trade-off concerning peak reflectivity, stop band width, and strain state of the Bragg mirrors. For the high refractive index material GaN is used in all cases, while for the low index material a layer of either AlGaN or AlInN, respectively, or a AlN/(In)GaN short-period superlattice (SL) is employed. The best peak reflectivity of 97% at a wavelength of 495 nm is achieved for a lattice matched Bragg reflector based on the GaN/AlInN material combination. Transmission electron microscopy image of a 30-fold distributed Bragg reflector consisting of AlInN (dark) and GaN (bright) layers. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  3. Dynamic gate algorithm for multimode fiber Bragg grating sensor systems

    DEFF Research Database (Denmark)

    Ganziy, Denis; Jespersen, O.; Woyessa, Getinet;

    2015-01-01

    -to-noise ratio and different peak shapes. Our simulations and experiments demonstrate that the DGA method is fast and robust with better stability and accuracy than conventional algorithms. This makes it very attractive for future implementation in sensing systems, especially based on multimode fiber Bragg...

  4. Laser sensor with Bragg gratings of fiber optics to physics parameter measuring

    International Nuclear Information System (INIS)

    We present the operation of a fiber laser sensor made by an Erbium Doped Fiber pumped at 980nm, an 4.23 km passive fiber and two fiber Bragg gratings placed at the ends of the laser cavity. Under normal conditions, the Bragg gratings have different reflection wavelengths and laser emission is not generated. The two Bragg gratings can be placed at the same reflection wavelength when the Bragg grating with the lowest reflective wavelength increases their temperature which can be used as a sensor element. The laser generation thus shows that the Bragg grating is increasing their temperature. We used a Peltier cell for to change gradually the temperature. (Author)

  5. Spectrometer with CMOS demodulation of fiber optic Bragg grating sensors

    Science.gov (United States)

    Christiansen, Martin Brokner

    A CMOS imager based spectrometer is developed to interrogate a network containing a large number of Bragg grating sensors. The spectrometer uses a Prism-Grating- Prism (PGP) to spectrally separate serially multiplexed Bragg reflections on a single fiber. As a result, each Bragg grating produces a discrete spot on the CMOS imager that shifts horizontally as the Bragg grating experiences changes in strain or temperature. The reflected wavelength of the spot can be determined by finding the center of the spot produced. The use of a randomly addressable CMOS imager enables a flexible sampling rate. Some fibers can be interrogated at a high sampling rate while others can be interrogated at a low sampling rate. However, the use of a CMOS imager leads to several unique problems in terms of signal processing. These include a logarithmic pixel response, a low signal-to-noise ratio, a long pixel time constant, and software issues. The expected capabilities of the CMOS imager based spectrometer are determined with a theoretical model. The theoretical model tests three algorithms for determining the center of the spot: single row centroid, single row parabolic fit, and entire spot centroid. The theoretical results are compared to laboratory test data and field test data. The CMOS based spectrometer is capable of interrogating many optical fibers, and in the configuration tested, the fiber bundle consisted of 23 fibers. Using this system, a single fiber can be interrogated from 778 nm to 852 nm at 2100 Hz or multiple fibers can be interrogated over the same wavelength so that the total number of fiber interrogations is up to 2100 per second. The reflected Bragg wavelength can be determined within +/-3pm, corresponding to a +/-3μɛ uncertainty.

  6. Characterizing the hard x-ray diffraction properties of a GaAs linear Bragg-Fresnel lens

    International Nuclear Information System (INIS)

    We investigated the diffractive focusing properties of (111) GaAs linear Bragg-Fresnel lenses (BFLs) developed for hard x-ray microscopy and microdiffraction of complex materials in confined geometries. We demonstrated that the use of GaAs yields significant processing advantages due to the reduced zone depth. Focal plane diffraction patterns of linear BFLs measured at the advanced photon source using 8-40 keV x rays were compared to a simple model based on Kirchhoff-Fresnel diffraction theory. Good agreement was obtained between experimental data and model calculations using only zones within an effective aperture defined by the transverse coherence of the source. (c) 2000 American Institute of Physics

  7. Ionoacoustic characterization of the proton Bragg peak with submillimeter accuracy

    Energy Technology Data Exchange (ETDEWEB)

    Assmann, W., E-mail: walter.assmann@lmu.de; Reinhardt, S.; Lehrack, S.; Edlich, A.; Thirolf, P. G.; Parodi, K. [Department for Medical Physics, Ludwig-Maximilians-Universität München, Am Coulombwall 1, Garching 85748 (Germany); Kellnberger, S.; Omar, M.; Ntziachristos, V. [Institute for Biological and Medical Imaging, Technische Universität München and Helmholtz Zentrum München, Ingolstädter Landstrasse 1, Neuherberg 85764 (Germany); Moser, M.; Dollinger, G. [Institute for Applied Physics and Measurement Technology, Universität der Bundeswehr, Werner-Heisenberg-Weg 39, Neubiberg 85577 (Germany)

    2015-02-15

    Purpose: Range verification in ion beam therapy relies to date on nuclear imaging techniques which require complex and costly detector systems. A different approach is the detection of thermoacoustic signals that are generated due to localized energy loss of ion beams in tissue (ionoacoustics). Aim of this work was to study experimentally the achievable position resolution of ionoacoustics under idealized conditions using high frequency ultrasonic transducers and a specifically selected probing beam. Methods: A water phantom was irradiated by a pulsed 20 MeV proton beam with varying pulse intensity and length. The acoustic signal of single proton pulses was measured by different PZT-based ultrasound detectors (3.5 and 10 MHz central frequencies). The proton dose distribution in water was calculated by Geant4 and used as input for simulation of the generated acoustic wave by the matlab toolbox k-WAVE. Results: In measurements from this study, a clear signal of the Bragg peak was observed for an energy deposition as low as 10{sup 12} eV. The signal amplitude showed a linear increase with particle number per pulse and thus, dose. Bragg peak position measurements were reproducible within ±30 μm and agreed with Geant4 simulations to better than 100 μm. The ionoacoustic signal pattern allowed for a detailed analysis of the Bragg peak and could be well reproduced by k-WAVE simulations. Conclusions: The authors have studied the ionoacoustic signal of the Bragg peak in experiments using a 20 MeV proton beam with its correspondingly localized energy deposition, demonstrating submillimeter position resolution and providing a deep insight in the correlation between the acoustic signal and Bragg peak shape. These results, together with earlier experiments and new simulations (including the results in this study) at higher energies, suggest ionoacoustics as a technique for range verification in particle therapy at locations, where the tumor can be localized by ultrasound

  8. Distribution of Micronuclei in Human Fibroblasts across the Bragg Curve of Light and Heavy Ions

    Science.gov (United States)

    Hada, M.; Lacy, S.; Gridley, D. S.; Rusek, A.; Cucinotta, F. A.; Wu, H.

    2007-01-01

    The space environment consists of energetic particles of varying mass and energy, and understanding the :biological Bragg curve" is essential in optimizing shielding effectiveness against space radiation induced biological impacts. The "biological Bragg curve" is dependent on the energy and the type of the primary particle, and may vary for different biological endpoints. Previously, we studied the induction of micronuclei (MN) across the Bragg curve of energetic Fe and Si ions, and observed no increased yield of MN at the location of the Bragg peak. However, the ratio of mono- to bi-nucleated cells, which indicates inhibition of cell progression, was found higher at the Bragg peak location in comparison to the plateau region of the Bragg curve. Here, we report the induction of MN in normal human fibroblast cells across the Bragg curve of incident protons generated at Loma Linda University. Similar to Si and Fe ions, the ratio of mono- to bi-nucleated cells showed a clear spike as the protons reached the Bragg peak. Unlike the two heavy ions, however, the MN yield also increased at the Bragg peak location. These results confirm the hypothesis that severely damaged cells at the Bragg peak of heavy, but not light ions are more likely to go through reproductive death and not be evaluated for micronuclei.

  9. Improved Phase-Mask Fabrication of Fiber Bragg Gratings

    Science.gov (United States)

    Grant, Joseph; Wang, Ying; Sharma, Anup

    2004-01-01

    An improved method of fabrication of Bragg gratings in optical fibers combines the best features of two prior methods: one that involves the use of a phase mask and one that involves interference between the two coherent laser beams. The improved method affords flexibility for tailoring Bragg wavelengths and bandwidths over wide ranges. A Bragg grating in an optical fiber is a periodic longitudinal variation in the index of refraction of the fiber core. The spatial period (Bragg wavelength) is chosen to obtain enhanced reflection of light of a given wavelength that would otherwise propagate relatively unimpeded along the core. Optionally, the spatial period of the index modulation can be made to vary gradually along the grating (such a grating is said to be chirped ) in order to obtain enhanced reflection across a wavelength band, the width of which is determined by the difference between the maximum and minimum Bragg wavelengths. In the present method as in both prior methods, a Bragg grating is formed by exposing an optical fiber to an ultraviolet-light interference field. The Bragg grating coincides with the pattern of exposure of the fiber core to ultraviolet light; in other words, the Bragg grating coincides with the interference fringes. Hence, the problem of tailoring the Bragg wavelength and bandwidth is largely one of tailoring the interference pattern and the placement of the fiber in the interference pattern. In the prior two-beam interferometric method, a single laser beam is split into two beams, which are subsequently recombined to produce an interference pattern at the location of an optical fiber. In the prior phase-mask method, a phase mask is used to diffract a laser beam mainly into two first orders, the interference between which creates the pattern to which an optical fiber is exposed. The prior two-beam interferometric method offers the advantage that the period of the interference pattern can be adjusted to produce gratings over a wide range

  10. Andreev-Bragg Reflection from an Amperian Superconductor

    Science.gov (United States)

    Baireuther, P.; Hyart, T.; Tarasinski, B.; Beenakker, C. W. J.

    2015-08-01

    We show how an electrical measurement can detect the pairing of electrons on the same side of the Fermi surface (Amperian pairing), recently proposed by Patrick Lee for the pseudogap phase of high-Tc cuprate superconductors. Bragg scattering from the pair-density wave introduces odd multiples of 2 kF momentum shifts when an electron incident from a normal metal is Andreev reflected as a hole. These Andreev-Bragg reflections can be detected in a three-terminal device, containing a ballistic Y junction between normal leads (1, 2) and the superconductor. The cross-conductance d I1/d V2 has the opposite sign for Amperian pairing than it has either in the normal state or for the usual BCS pairing.

  11. Bragg-peak spectroscopy of low-energy heavy ions

    International Nuclear Information System (INIS)

    A small axial ionization chamber with the electric field lines parallel to the particle trajectory (Bragg ionization chamber) allowing the determination of the nuclear charge and the energy of low energetic low mass heavy ions (E/A approximately 0.8 - 2.0 MeV/amu) is presented together with an adapted shaping amplifier. Using the usual technique of pulse shaping with a long and a short time constant the energy and the Bragg peak resolutions for projectiles between 24He and 1632S were determined. With commercially available low purity n-pentane purified from water and oxygene by a threefold destillation an energy resolution of ΔE/E = 1% and a charge resolving power of Z/ΔZ = 47 are attainable for 41.4 MeV 28Si ions elastically scattered from 197Au. No significant pulse height defect is observable for the energy determination of particles with Z <= 17. (author)

  12. Magneto-Optic Field Coupling in Optical Fiber Bragg Gratings

    Science.gov (United States)

    Carman, Gregory P. (Inventor); Emmons, Michael C. (Inventor); Richards, William Lance (Inventor); Mohanchandra, Panduranga K. (Inventor)

    2016-01-01

    The invention is a magneto-optic coupled magnetic sensor that comprises a standard optical fiber Bragg grating system. The system includes an optical fiber with at least one Bragg grating therein. The optical fiber has at least an inner core and a cladding that surrounds the inner core. The optical fiber is part of an optical system that includes an interrogation device that provides a light wave through the optical fiber and a system to determine the change in the index of refraction of the optical fiber. The cladding of the optical fiber comprises at least a portion of which is made up of ferromagnetic particles so that the ferromagnetic particles are subject to the light wave provided by the interrogation system. When a magnetic field is present, the ferromagnetic particles change the optical properties of the sensor directly.

  13. Self-aligned Coupled Waveguide Distributed Bragg Reflector Lasers

    Institute of Scientific and Technical Information of China (English)

    LIU Guoli; WANG Wei; ZHU Hongliang; ZHANG Jingyuan; HU Xiaohua; LU Yu; ZHANG Jing

    2002-01-01

    A novel self-aligned coupled waveguide (SACW) multi-quantum-well (MQW) distributed Bragg reflector (DBR) laser is proposed and demonstrated for the first time. By selectively removing the MQW layer and leaving the low SCH/SACW layer the Bragg grating is partially formed on this layer. By optimizing the thickness of the low SCH/SACW layer, a~80% coupling efficiency between the MQW gain region and the passive region are obtained. The typical threshold current of the SACW DBR laser is 39 mA, the slope efficiency can reach to 0.2 mW/mA and the output power is more than 20 mW with a more than 30dB side mode suppression ratio.

  14. Processing of Signals from Fiber Bragg Gratings Using Unbalanced Interferometers

    Science.gov (United States)

    Adamovsky, Grigory; Juergens, Jeff; Floyd, Bertram

    2005-01-01

    Fiber Bragg gratings (FBG) have become preferred sensory structures in fiber optic sensing system. High sensitivity, embedability, and multiplexing capabilities make FBGs superior to other sensor configurations. The main feature of FBGs is that they respond in the wavelength domain with the wavelength of the returned signal as the indicator of the measured parameter. The wavelength is then converted to optical intensity by a photodetector to detect corresponding changes in intensity. This wavelength-to-intensity conversion is a crucial part in any FBG-based sensing system. Among the various types of wavelength-to-intensity converters, unbalanced interferometers are especially attractive because of their small weight and volume, lack of moving parts, easy integration, and good stability. In this paper we investigate the applicability of unbalanced interferometers to analyze signals reflected from Bragg gratings. Analytical and experimental data are presented.

  15. Investigations on birefringence effects in polymer optical fiber Bragg gratings

    DEFF Research Database (Denmark)

    Hu, Xiaolian; Saez-Rodriguez, D.; Bang, Ole;

    2014-01-01

    Step-index polymer optical fiber Bragg gratings (POFBGs) and microstructured polymer optical fiber Bragg gratings (mPOFBGs) present several attractive features, especially for sensing purposes. In comparison to FBGs written in silica fibers, they are more sensitive to temperature and pressure...... because of the larger thermo-optic coefficient and smaller Young's modulus of polymer materials. (M)POFBGs are most often photowritten in poly(methylmethacrylate) (PMMA) materials using a continuous-wave 325 nm HeCd laser. For the first time to the best of our knowledge, we study photoinduced...... birefringence effects in (m)POFBGs. To achieve this, highly reflective gratings were inscribed with the phase mask technique. They were then monitored in transmission with polarized light. For this, (m)POF sections a few cm in length containing the gratings were glued to angled silica fibers. Polarization...

  16. Andreev-Bragg Reflection from an Amperian Superconductor.

    Science.gov (United States)

    Baireuther, P; Hyart, T; Tarasinski, B; Beenakker, C W J

    2015-08-28

    We show how an electrical measurement can detect the pairing of electrons on the same side of the Fermi surface (Amperian pairing), recently proposed by Patrick Lee for the pseudogap phase of high-Tc cuprate superconductors. Bragg scattering from the pair-density wave introduces odd multiples of 2k(F) momentum shifts when an electron incident from a normal metal is Andreev reflected as a hole. These Andreev-Bragg reflections can be detected in a three-terminal device, containing a ballistic Y junction between normal leads (1, 2) and the superconductor. The cross-conductance dI1/dV2 has the opposite sign for Amperian pairing than it has either in the normal state or for the usual BCS pairing. PMID:26371674

  17. Planar Bragg Grating Sensors—Fabrication and Applications: A Review

    Directory of Open Access Journals (Sweden)

    I. J. G. Sparrow

    2009-01-01

    Full Text Available We discuss the background and technology of planar Bragg grating sensors, reviewing their development and describing the latest developments. The physical operating principles are discussed, relating device operation to user requirements. Recent performance of such devices includes a planar Bragg grating sensor design which allows refractive index resolution of 1.9×10−6 RIU and temperature resolution of 0.03∘C. This sensor design is incorporated into industrialised applications allowing the sensor to be used for real time sensing in intrinsically safe, high-pressure pipelines, or for insertion probe applications such as fermentation. Initial data demonstrating the ability to identify solvents and monitor long term industrial processes is presented. A brief review of the technology used to fabricate the sensors is given along with examples of the flexibility afforded by the technique.

  18. Fiber Bragg grating strain sensors for marine engineering

    Science.gov (United States)

    Wang, Tingting; Yuan, Zilin; Gong, Yuan; Wu, Yu; Rao, Yunjiang; Wei, Lili; Guo, Peng; Wang, Junpu; Wan, Fu

    2013-09-01

    For the health monitoring of the offshore drilling platform in the salt-fog environment, three nonmetallic materials, i.e., silica, FR-4 epoxy board and sheet molding compound (SMC), with the good anti-corrosion ability were chosen as the packaging materials for the fiber Bragg grating (FBG) strain sensors. By selecting a highly sensitive structure of the fiber Bragg grating strain sensor, the performances of the sensors with three materials were investigated both numerically and experimentally. The strain sensitivities were 3.76 pm/μɛ, 3.02 pm/μɛ and 3.03 pm/μɛ, respectively. The linearity was better than 0.998. It provides useful information for developing sensors for the marine engineering.

  19. Photonic crystal distributed feedback fiber lasers with Bragg gratings

    DEFF Research Database (Denmark)

    Søndergaard, Thomas

    2000-01-01

    Two new types of optical fibers, where air-holes are running down their length, are considered for making fiber lasers with Bragg gratings. The mode areas for pump and signal in these fiber lasers may be either larger or smaller compared to the corresponding mode areas for fiber lasers based on...... standard step index fibers. This makes possible realization of fiber lasers with a low pump threshold (small mode area), and fiber lasers suitable for high-power applications (large mode area)...

  20. DESIGN AND SIMULATION OF FIBER BRAGG GRATING BASED SENSORS

    OpenAIRE

    MOHAMED M. SALEH; RIADH K. A. Al-ANI; ILHAM K. ONEES

    2014-01-01

    In this paper the temperature and strain sensing principle of FBG based sensors are design & simulated by using Optigrating software. Simulation tools provide valuable help in optimizing the design parameters.From the graphical simulations, it can be concluded that there is a linear relationship between the Bragg wavelength shift and the temperature as well as the strain change. Also different values of grating period due to increasing the value of shifted wavelength.

  1. Simulation of Novel Tunable Nonlinear Chirped Fiber Bragg Grating

    Institute of Scientific and Technical Information of China (English)

    LIU Yu-min; YU Zhong-yuan; ZHANG Xiao-guang; YU Li; YANG Bo-jun

    2003-01-01

    A novel tunable chirped fiber Bragg grating technology is proposed and simulated numerically by Matlab. If we adhere a uniform fiber grating with super magnetostrictive film and expose them in a non-uniform magnetic field, the period of the grating can be changed with the strain imposed on it by the magnetostrictive effect .The chirped characteristics can be tuned by changing the magnetic filed which is very flexible in designing.

  2. Trial analysis of swine's periodontal ligament with Bragg grating sensors

    Science.gov (United States)

    Menegotto, G. F.; Grabarski, L.; Kalinowski, H. J.; Simões, J. A.

    2009-10-01

    In this work it is reported the measurement of the differential strain between the dental and bone tissues under effect of an applied load. Slices of swine mandible, containing the premolar tooth, are cut and measured in fresh condition. The strain is measured using fibre Bragg grating sensors glued to both tissues. In the measured range the results show a linear behaviour and confirm the importance of the periodontal ligament in the load transfer mechanism.

  3. Bragg optics computer codes for neutron scattering instrument design

    Energy Technology Data Exchange (ETDEWEB)

    Popovici, M.; Yelon, W.B.; Berliner, R.R. [Missouri Univ. Research Reactor, Columbia, MO (United States); Stoica, A.D. [Institute of Physics and Technology of Materials, Bucharest (Romania)

    1997-09-01

    Computer codes for neutron crystal spectrometer design, optimization and experiment planning are described. Phase space distributions, linewidths and absolute intensities are calculated by matrix methods in an extension of the Cooper-Nathans resolution function formalism. For modeling the Bragg reflection on bent crystals the lamellar approximation is used. Optimization is done by satisfying conditions of focusing in scattering and in real space, and by numerically maximizing figures of merit. Examples for three-axis and two-axis spectrometers are given.

  4. Large-momentum-transfer Bragg interferometer with strontium atoms

    CERN Document Server

    Mazzoni, T; Del Aguila, R; Salvi, L; Poli, N; Tino, G M

    2015-01-01

    We report on the first atom interferometer based on Bragg diffraction in a fountain of alkaline-earth atoms, namely $^{88}$Sr. We demonstrate large momentum transfer to the atoms up to eight photon recoils and the use of the interferometer as a gravimeter with a sensitivity $\\delta g/g=4\\times 10^{-8}$. Thanks to the special characteristics of strontium atoms for precision measurements, this result opens a new way for experiments in fundamental and applied physics.

  5. Boron-doped superlattices and Bragg mirrors in diamond

    OpenAIRE

    Fiori, Alexandre; Bousquet, Jessica; Eon, David; Omnès, Franck; Bellet-Amalric, E.; Bustarret, Etienne

    2014-01-01

    International audience A periodic modulation of the boron doping level of single crystal diamond multilayers over more than three orders of magnitude during epitaxial growth by microwave plasma-enhanced chemical vapor deposition is shown to yield Bragg mirrors in the visible. The thicknesses and doping level of the individual layers were controlled by in situ spectroscopic ellipsometry, enabling to tune the reflec-tance peak to the wavelength range of diamond color centers, such as NV 0 or...

  6. Fiber Bragg Gratings Embedded in 3D-Printed Scaffolds

    CERN Document Server

    Liacouras, Peter; Choudhry, Khazar; Strouse, G F; Ahmed, Zeeshan

    2015-01-01

    In recent years there has been considerable interest in utilizing embedded fiber optic based sensors for fabricating smart materials. One of the primary motivations is to provide real-time information on the structural integrity of the material so as to enable proactive actions that prevent catastrophic failure. In this preliminary study we have examined the impact of embedding on the temperature-dependent response of fiber Bragg gratings.

  7. Degradation of the Bragg peak due to inhomogeneities.

    Science.gov (United States)

    Urie, M; Goitein, M; Holley, W R; Chen, G T

    1986-01-01

    The rapid fall-off of dose at the end of range of heavy charged particle beams has the potential in therapeutic applications of sparing critical structures just distal to the target volume. Here we explored the effects of highly inhomogeneous regions on this desirable depth-dose characteristic. The proton depth-dose distribution behind a lucite-air interface parallel to the beam was bimodal, indicating the presence of two groups of protons with different residual ranges, creating a step-like depth-dose distribution at the end of range. The residual ranges became more spread out as the interface was angled at 3 degrees, and still more at 6 degrees, to the direction of the beam. A second experiment showed little significant effect on the distal depth-dose of protons having passed through a mosaic of teflon and lucite. Anatomic studies demonstrated significant effects of complex fine inhomogeneities on the end of range characteristics. Monoenergetic protons passing through the petrous ridges and mastoid air cells in the base of skull showed a dramatic degradation of the distal Bragg peak. In beams with spread out Bragg peaks passing through regions of the base of skull, the distal fall-off from 90 to 20% dose was increased from its nominal 6 to well over 32 mm. Heavy ions showed a corresponding degradation in their ends of range. In the worst case in the base of skull region, a monoenergetic neon beam showed a broadening of the full width at half maximum of the Bragg peak to over 15 mm (compared with 4 mm in a homogeneous unit density medium). A similar effect was found with carbon ions in the abdomen, where the full width at half maximum of the Bragg peak (nominally 5.5 mm) was found to be greater than 25 mm behind gas-soft-tissue interfaces. We address the implications of these data for dose computation with heavy charged particles. PMID:3952143

  8. A high sensitive fiber Bragg grating cryogenic temperature sensor

    Institute of Scientific and Technical Information of China (English)

    Kuo Li; Zhen'an Zhou; Aichun Liu

    2009-01-01

    At cryogenic temperature, a fiber Bragg grating (FBG) temperature sensor with controllable sensitivity and variable measurement range is demonstrated by using bimetal configuration. In experiments, sensitivities of -51.2, -86.4, and -520 pm/K are achieved by varying the lengths of the metals. Measurement ranges of 293 - 290.5, 283 - 280.5, and 259 - 256.5 K are achieved by shortening the distance of the gap among the metals.

  9. Underwater Acoustic Sensors Based on Fiber Bragg Gratings

    OpenAIRE

    Giuseppe Parente; Giuseppe Lanza; Armando Laudati; Michele Giordano; Andrea Cusano; Stefania Campopiano; Antonello Cutolo

    2009-01-01

    We report on recent results obtained with a fiber optic hydrophone based on the intensity modulation of the laser light in a FBG (Fiber Bragg Grating) under the influence of the sound pressure. In order to control the behavior of the hydrophone in terms of sensitivity and bandwidth, FBGs have been coated with proper materials, characterized by different elastic modulus and shapes. In particular, new experiments have been carried out using a cylindrical geometry with two different coating, sho...

  10. Measurement of sensors with fiber Bragg gratings by laser interferometer

    Czech Academy of Sciences Publication Activity Database

    Mikel, Břetislav; Čížek, Martin; Řeřucha, Šimon; Číp, Ondřej

    Budva : University of Montenegro, 2013. s. 47. [ALT´13. Annual International Conference on Advanced Laser Technologies /21./. 16.09.2013-20.09.2013, Budva] R&D Projects: GA MŠk ED0017/01/01; GA TA ČR TA01010995; GA TA ČR(CZ) TA03010835 Institutional support: RVO:68081731 Keywords : fiber Bragg sensors * laser interferometry * optical spectrum analysis * fiber sensors Subject RIV: BH - Optics, Masers, Laser s

  11. Calibration of elongation of fiber Bragg gratings by laser interferometer

    Czech Academy of Sciences Publication Activity Database

    Mikel, Břetislav; Čížek, Martin; Holík, M.; Číp, Ondřej

    Bellingham : SPIE, 2013, 89161I:1-6. ISSN 0277-786X. [International Symposium on Precision Mechanical Measurements /6./. Guiyang (CN), 10.10.2013] R&D Projects: GA MŠk ED0017/01/01; GA TA ČR TA01010995; GA TA ČR(CZ) TA03010835; GA MV VG20132015124 Institutional support: RVO:68081731 Keywords : Fiber Bragg gratings * Interferometers * Laser s * Optical fibers * Buildings Subject RIV: BH - Optics, Masers, Laser s

  12. High frequency strain measurements with fiber Bragg grating sensors

    Science.gov (United States)

    Koch, J.; Angelmahr, M.; Schade, W.

    2015-05-01

    In recent years fiber Bragg grating sensors gained interest in structural health monitoring and concepts for smart structures. They are small, lightweight, and immune to electromagnetic interference. Using multiplexing techniques, several sensors can be addressed by a single fiber. Therefore, well-established structures and materials in industrial applications can be easily equipped with fiber optical sensors with marginal influence on their mechanical properties. In return, critical components can be monitored in real-time, leading to reduced maintenance intervals and a great reduction of costs. Beside of generally condition monitoring, the localization of failures in a structure is a desired feature of the condition monitoring system. Detecting the acoustic emission of a sudden event, its place of origin can be determined by analyzing the delay time of distributed sensor signals. To achieve high localization accuracies for the detection of cracks, breaks, and impacts high sampling rates combined with the simultaneous interrogation of several fiber Bragg grating sensors are required. In this article a fiber Bragg grating interrogator for high frequency measurements up to the megahertz range is presented. The interrogator is based on a passive wavelength to intensity conversion applying arrayed waveguide gratings. Light power fluctuations are suppressed by a differential data evaluation, leading to a reduced signal-to-noise ratio and a low strain detection limit. The measurement system is used to detect, inter alia, wire breaks in steel wire ropes for dockside cranes.

  13. Synchrotron radiation focusing by a Bragg--Fresnel lens

    International Nuclear Information System (INIS)

    Since the discovery of x rays and until the present time the possibilities of their controlling and focusing have been widely discussed. In the hard spectrum region (λ∼1 A) the main focusing schemes are the following: geometrical focusing based on incoherent interaction of wave packets reflected by different regions of bending crystals and coherent (dynamic) focusing performed at the cost of the effect of refraction index angular dispersion near the exact Bragg angle value -θB. A main disadvantage of geometrical focusing is low spatial resolution (∼0.1 mm) and temperature stability. In the case of coherent focusing a main disadvantage is a narrow angular aperture (∼10 sec. of arc) at spatial resolution (∼1--10 μm). Recently, advances in the development of diffraction physics and microstructuring technology open up possibilities for fabricating effective focusing x-ray optical elements---Bragg--Fresnel lenses (BFL)---with high spatial resolution (∼0.1 μm) at a wide angular aperture and high temperature stability. The present paper describes the main principles of Bragg--Fresnel optics (BFO). It presents the results on the synchrotron experiment and on observation of focusing. In this work the peculiarities of BFL diffraction contrast formation are investigated and image transmission using a BFL is performed. Possibilities of developing x-ray optical schemes of ultrahigh resolution on the basis of BFL elements are also discussed

  14. Dynamical theory of stratified Fresnel linear zone plates

    International Nuclear Information System (INIS)

    A dynamical theory is given for calculating the performances of stratified Fresnel linear zone plates (SFLZP's). The Born expansion extended to the Fresnel diffraction is used to prove a fundamental theorem giving the diffraction efficiency and the diffraction pattern of transmission or reflection SFLZP's. The method is valuable as long as the wavelength is smaller than the characteristic parameter of the zone plate. It allows us to evaluate the performances of reflection multilayer SFLZPs, i.e., the so-called Bragg-Fresnel optics recently developed for x-ray optics. 17 refs., 8 figs

  15. A Method to Discriminate Strain and Temperature in Fiber Bragg Grating Sensors

    OpenAIRE

    Chalapati, Madhan T; Pattnaik, PK; Selvarajan, A; T. Srinivas

    2005-01-01

    A significant limitation to the applications of fiber Bragg gratings (FBG) sensors is the sensitivity of the Bragg wavelength to both temperature and strain, complicating the independent measurement of these paremeters. In this letter, we explore a new method to discriminate strain and temperature in FBG sensors, which utilises the additioanl wavelength dependent phase introduced by Fiber Bragg grating written on sensing arm of Mach Zehnder Interferometer (MZI). The intensity variations of th...

  16. Influence of Non-uniform Temperature Field on Spectra of Fibre Bragg Grating

    Institute of Scientific and Technical Information of China (English)

    ZHOU Yan; HE Xing-Fang; YUAN Jie; YIN Li-Qun; FANG Xiao-Yong; CAO Mao-Sheng

    2009-01-01

    We simulate the spectrum characteristics of fibre Bragg grating (FBG) with non-uniform temperature using the transmission matrix method, and the results are analysed. It is found that firstly the modulated coefficient of average refractive index is a very important parameter that influences the spectrum characteristic of the fibre Bragg grating, and secondly the spectrum curves are different in different temperature fields at the same parameter. Hence, we can determine the metrical temperature by analysing the spectrum of fibre Bragg grating.

  17. Spectral characteristics of draw-tower step-chirped fiber Bragg gratings

    Science.gov (United States)

    Idrisov, Ravil F.; Varzhel, Sergey V.; Kulikov, Andrey V.; Meshkovskiy, Igor K.; Rothhardt, Manfred; Becker, Martin; Schuster, Kay; Bartelt, Hartmut

    2016-06-01

    This paper presents research results on the spectral properties of step-chirped fiber Bragg grating arrays written during the fiber drawing process into a birefringent optical fiber with an elliptical stress cladding. The dependences of resonance shift of the step-chirped fiber Bragg grating on bending, on applied tensile stress and on temperature have been investigated. A usage of such step-chirped fiber Bragg gratings in fiber-optic sensing elements creation has been considered.

  18. SPECTRAL CHARACTERISTIC OF UNIFORM FIBER BRAGG GRATING USING COUPLE MODE THEORY

    Directory of Open Access Journals (Sweden)

    JYOTSNA RANI MAHAPATRA, MANISHA CHATTOPADHYAY

    2013-08-01

    Full Text Available This paper presents spectral characteristic of Fiber Bragg Grating. Here the modeling and simulation of an optical fiber Bragg grating for reflectivity based on coupled mode theory is discussed in details. Grating length represent as one of the important parameters in contributing to a high performance Fiber Bragg Grating. The reflection spectrum is analyzed with different parameters like wavelength, grating lengths and induced index change

  19. What is the Brillouin Zone of an Anisotropic Photonic Crystal?

    CERN Document Server

    Sivarajah, P; Ofori-Okai, B K; Nelson, K A

    2015-01-01

    The concept of the Brillouin zone (BZ) in relation to a photonic crystal fabricated in an optically anisotropic material is explored both experimentally and theoretically. In experiment, we used femtosecond laser pulses to excite THz polaritons and image their propagation in lithium niobate and lithium tantalate photonic crystal (PhC) slabs. We directly measured the dispersion relation inside PhCs and observed that the lowest bandgap expected to form at the BZ boundary forms inside the BZ in the anisotropic lithium niobate PhC. Our analysis shows that in an anisotropic material the BZ - defined as the Wigner-Seitz cell in the reciprocal lattice - is no longer bounded by Bragg planes and thus does not conform to the original definition of the BZ by Brillouin. We construct an alternative Brillouin zone defined by Bragg planes and show its utility in identifying features of the dispersion bands. We show that for an anisotropic 2D PhC without dispersion, the Bragg plane BZ can be constructed by applying the Wigne...

  20. Underwater Acoustic Sensors Based on Fiber Bragg Gratings

    Directory of Open Access Journals (Sweden)

    Giuseppe Parente

    2009-06-01

    Full Text Available We report on recent results obtained with a fiber optic hydrophone based on the intensity modulation of the laser light in a FBG (Fiber Bragg Grating under the influence of the sound pressure. In order to control the behavior of the hydrophone in terms of sensitivity and bandwidth, FBGs have been coated with proper materials, characterized by different elastic modulus and shapes. In particular, new experiments have been carried out using a cylindrical geometry with two different coating, showing that the sensitivity is not influenced by the shape but by the transversal dimension and the material characteristics of the coating.

  1. Weldable fibre Bragg grating sensors for steel bridge monitoring

    International Nuclear Information System (INIS)

    For applications related to the structural health monitoring of steel bridges, novel weldable strain and temperature sensors based on fibre Bragg gratings were developed. These sensors, which can be directly welded to metallic structures, reveal linear responses over typical required measurement ranges and stability over thousands of load and temperature cycles. Proper installation procedures and in-field mechanical protection were also developed and implemented. The significance of the developed sensors was demonstrated through the installation of a complete sensing network on a new circular pedestrian bridge in Aveiro, Portugal, where it was used for loading tests, and also for in-service monitoring of its structural health

  2. Application of the Transmission Bragg Gratings for Vibration Monitoring

    CERN Document Server

    Tikhonov, E A

    2010-01-01

    It is shown that the optical-electronic system consisted of the transmission Bragg grating, a laser and the intermediate sensitive to the vibrations mirror can detect the vibrations, when touched by them laser beam scan will exceed the angular divergence of the beam. The mathematical model of the sensor of the vibrations presented in the form of Taylor series describes the system response taking into account the operating point, in particular, describes the effect of the doubling of the modulation frequency response relative to the frequency of acting vibrations.

  3. On-Chip Silicon Waveguide Bragg Grating Photonic Temperature Sensor

    CERN Document Server

    Klimov, Nikolai N; Berger, Michaela; Ahmed, Zeeshan

    2015-01-01

    Resistance thermometry is a time-tested method for taking temperature measurements. In recent years fundamental limits to resistance-based approaches spurred considerable interest in developing photonic temperature sensors as a viable alternative. In this study we demonstrate that our photonic thermometer, which consists of a silicon waveguide integrated with a Bragg grating, can be used to measure temperature changes over the range from 5 C to 160 C with a combined expanded uncertainty [k = 2 ; 95% confidence level] of 1.25 degree C. The computational modeling of the sensor predicts the resonance wavelength and effective refractive index within 4% of the measured value.

  4. Bragg-Berry mirrors: reflective broadband q-plates

    CERN Document Server

    Rafayelyan, Mushegh

    2016-01-01

    We report on the experimental realization of flat mirrors enabling the broadband generation of optical vortices upon reflection. The effect is based on the geometric Berry phase associated with the circular Bragg reflection phenomenon from chiral uniaxial media. We show the reflective optical vortex generation from both diffractive and nondiffractive paraxial light beams using spatially patterned chiral liquid crystal films. The intrinsic spectrally broadband character of spin-orbit generation of optical phase singularities is demonstrated over the full visible domain. Our results do not rely on any birefringent retardation requirement and consequently foster the development of a novel generation of robust optical elements for spin-orbit photonic technologies.

  5. Photoluminescence and X-ray Diffraction of Distributed Bragg Reflector

    Institute of Scientific and Technical Information of China (English)

    LI Lin; LI Yong-da; LIU Wen-li; LU Bin; JU Guo-xian; ZHANG Yong-ming; HAO Yong-qin; SU Wei; ZHONG Jing-chang

    2004-01-01

    Spectral and structural characteristics of distributed Bragg reflector (DBR) in vertical-cavity surface-emitting lasers were studied with photoluminescence and double- crystal X- ray diffraction measurement. The expected high quality epitaxial DBR structure was verified. In the X- ray double- crystal rocking curves of DBR the zeroth- order peak, the first and second order satellite peaks were measured.Splitting of diffraction peak appeared in the rocking curves was analyzed. The effects of introduced deep energy levels on the structural perfection and optical properties were discussed.

  6. Reannealed Fiber Bragg Gratings Demonstrated High Repeatability in Temperature Measurements

    Science.gov (United States)

    Adamovsky, Grigory; Juergens, Jeffrey R.

    2004-01-01

    Fiber Bragg gratings (FBGs) are formed by periodic variations of the refractive index of an optical fiber. These periodic variations allow an FBG to act as an embedded optical filter, passing the majority of light propagating through a fiber while reflecting back a narrow band of the incident light. The peak reflected wavelength of the FBG is known as the Bragg wavelength. Since the period and width of the refractive index variation in the fiber determines the wavelengths that are transmitted and reflected by the grating, any force acting on the fiber that alters the physical structure of the grating will change the wavelengths that are transmitted and reflected by it. Both thermal and mechanical forces acting on the grating will alter its physical characteristics, allowing the FBG sensor to detect both the temperature variations and the physical stresses and strains placed upon it. This ability to sense multiple physical forces makes the FBG a versatile sensor. To assess the feasibility of using Bragg gratings as temperature sensors for propulsion applications, researchers at the NASA Glenn Research Center evaluated the performance of Bragg gratings at elevated temperatures for up to 300 C. For these purposes, commercially available polyimide-coated high-temperature gratings were used that were annealed by the manufacturer to 300 C. To assure the most thermally stable gratings at the operating temperatures, we reannealed the gratings to 400 C at a very slow rate for 12 to 24 hr until their reflected optical powers were stabilized. The reannealed gratings were then subjected to periodic thermal cycling from room temperature to 300 C, and their peak reflected wavelengths were monitored. The setup shown is used for reannealing and thermal cycling the FBGs. Signals from the photodetectors and the spectrum analyzer were fed into a computer equipped with LabVIEW software. The software synchronously monitored the oven/furnace temperature and the optical spectrum analyzer

  7. OPTIMIZATION OF INTRAGRATING SENSING USING FIBER BRAGG GRATING

    OpenAIRE

    B.B.PADHY; HAFTAY ABADI GEBRU; SANDIPAN M.NALAWADE

    2011-01-01

    Linearly Chirped Fiber Bragg Gratings (FBGs) have been optimized and investigated for intragrating sensing. The side lobes have been suppressed using Gaussian apodization while maintaining the peak reflectivity and the bandwidth of the reflected signal. We have achieved a chirp rate of 0.5 to 2 nm/mm for intragrating sensing.Average thermal sensitivity of 11.55 pm/ oC is obtained which is higher than uniform FBGs. We have achieved novel characteristics of linearly chirped FBGs under the effec...

  8. OPTIMIZATION OF INTRAGRATING SENSING USING FIBER BRAGG GRATING

    Directory of Open Access Journals (Sweden)

    B.B.PADHY

    2011-01-01

    Full Text Available Linearly Chirped Fiber Bragg Gratings (FBGs have been optimized and investigated for intragrating sensing. The side lobes have been suppressed using Gaussian apodization while maintaining the peak reflectivity and the bandwidth of the reflected signal. We have achieved a chirp rate of 0.5 to 2 nm/mm for intragrating sensing.Average thermal sensitivity of 11.55 pm/ oC is obtained which is higher than uniform FBGs. We have achieved novel characteristics of linearly chirped FBGs under the effect of non-monotonic physical parameter distribution fields for excellent spectral response profile for intragrating sensing.

  9. Microfiber-Based Bragg Gratings for Sensing Applications: A Review

    Directory of Open Access Journals (Sweden)

    Jun-Long Kou

    2012-06-01

    Full Text Available Microfiber-based Bragg gratings (MFBGs are an emerging concept in ultra-small optical fiber sensors. They have attracted great attention among researchers in the fiber sensing area because of their large evanescent field and compactness. In this review, the basic techniques for the fabrication of MFBGs are introduced first. Then, the sensing properties and applications of MFBGs are discussed, including measurement of refractive index (RI, temperature, and strain/force. Finally a summary of selected MFBG sensing elements from previous literature are tabulated.

  10. Passive Temperature-Compensating Technique for Microstructured Fiber Bragg Gratings

    CERN Document Server

    Huy, Minh Châu Phan; Dewynter, Véronique; Ferdinand, Pierre; Pagnoux, Dominique; Dussardier, Bernard; Blanc, Wilfried; 10.1109/JSEN.2008.926169

    2010-01-01

    The thermal drift of the characteristic wavelength of fiber Bragg gratings (FBGs) photowritten in the core of microstructured fibers (MOFs) is significantly reduced by inserting a liquid of suitable refractive index into their holes. For instance, the spectral range of variations is divided by a factor of 4 over a temperature range larger than 20\\degree C in a six-hole MOF, and the maximum sensitivity is reduced. Such passive FBG temperature compensation technique is of great interest for applications involving accurate sensing free of thermal effects.

  11. Dynamic gate algorithm for multimode fiber Bragg grating sensor systems.

    Science.gov (United States)

    Ganziy, D; Jespersen, O; Woyessa, G; Rose, B; Bang, O

    2015-06-20

    We propose a novel dynamic gate algorithm (DGA) for precise and accurate peak detection. The algorithm uses a threshold-determined detection window and center of gravity algorithm with bias compensation. We analyze the wavelength fit resolution of the DGA for different values of the signal-to-noise ratio and different peak shapes. Our simulations and experiments demonstrate that the DGA method is fast and robust with better stability and accuracy than conventional algorithms. This makes it very attractive for future implementation in sensing systems, especially based on multimode fiber Bragg gratings. PMID:26193010

  12. Underwater acoustic sensors based on fiber bragg gratings.

    Science.gov (United States)

    Campopiano, Stefania; Cutolo, Antonello; Cusano, Andrea; Giordano, Michele; Parente, Giuseppe; Lanza, Giuseppe; Laudati, Armando

    2009-01-01

    We report on recent results obtained with a fiber optic hydrophone based on the intensity modulation of the laser light in a FBG (Fiber Bragg Grating) under the influence of the sound pressure. In order to control the behavior of the hydrophone in terms of sensitivity and bandwidth, FBGs have been coated with proper materials, characterized by different elastic modulus and shapes. In particular, new experiments have been carried out using a cylindrical geometry with two different coating, showing that the sensitivity is not influenced by the shape but by the transversal dimension and the material characteristics of the coating. PMID:22408534

  13. A porous silicon Bragg grating waveguide by direct laser writing

    Energy Technology Data Exchange (ETDEWEB)

    Rea, Ilaria; Iodice, Mario; Coppola, Giuseppe; Rendina, Ivo; De Stefano, Luca [National Council of Research, Institute for Microelectronic and Microsystems, Department of Naples, Via P Castellino 111, I-80131 Naples (Italy); Marino, Antigone [Department of Physics, ' Federico II' University of Naples, Via Cinthia, I-80126 Naples (Italy)], E-mail: ilaria.rea@na.imm.cnr.it

    2008-09-10

    We have designed, fabricated and characterized a porous silicon-based Bragg grating integrated in an optical waveguide, by using a low cost and fast technique, direct laser writing. A periodic optical structure with a pitch of 10 {mu}m, resonant in the near-infrared wavelength region, has been obtained. The simulated transmission spectra, calculated by the transfer matrix method and waveguide modal computation, are in good qualitative agreement with the experimental ones. The waveguide transmission losses have been quantified as 22 dB cm{sup -1}.

  14. A porous silicon Bragg grating waveguide by direct laser writing

    International Nuclear Information System (INIS)

    We have designed, fabricated and characterized a porous silicon-based Bragg grating integrated in an optical waveguide, by using a low cost and fast technique, direct laser writing. A periodic optical structure with a pitch of 10 μm, resonant in the near-infrared wavelength region, has been obtained. The simulated transmission spectra, calculated by the transfer matrix method and waveguide modal computation, are in good qualitative agreement with the experimental ones. The waveguide transmission losses have been quantified as 22 dB cm-1

  15. Ultrafast laser inscribed fiber Bragg gratings for sensing applications

    Science.gov (United States)

    Mihailov, Stephen J.

    2016-05-01

    Because of their small size, passive nature, immunity to electromagnetic interference, and capability to directly measure physical parameters such as temperature and strain, fiber Bragg grating sensors have developed beyond a laboratory curiosity and are becoming a mainstream sensing technology. Recently, high temperature stable gratings based on femtosecond infrared laser-material processing have shown promise for use in extreme environments such as high temperature, pressure or ionizing radiation. Such gratings are ideally suited for energy production applications where there is a requirement for advanced energy system instrumentation and controls that are operable in harsh environments. This tutorial paper will present a review of some of the more recent developments.

  16. Fiber-bragg grating-loop ringdown method and apparatus

    Science.gov (United States)

    Wang, Chuji

    2008-01-29

    A device comprising a fiber grating loop ringdown (FGLRD) system of analysis is disclosed. A fiber Bragg grating (FBG) or Long-Period grating (LPG) written in a section of single mode fused silica fiber is incorporated into a fiber loop. By utilizing the wing areas of the gratings' bandwidth as a wavelength dependent attenuator of the light transmission, a fiber grating loop ringdown concept is formed. One aspect of the present invention is temperature sensing, which has been demonstrated using the disclosed device. Temperature measurements in the areas of accuracy, stability, high temperature, and dynamic range are also described.

  17. Optical Properties of High Sensitivity Fiber Bragg Grating on Temperature Sensor

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    In this paper, the spectrum shift properties of the center reflection wavelength detected to be based on the FBG sensor with ambient temperature change. The basic theoretical methods and numerical simulation for the spectral properties of uniform Bragg grating is analyzed by using coupling mode theory which is optical properties of high sensitivity fiber Bragg grating on temperature sensor in accordance with experiment.

  18. Numerical Simulation of Bragg Reflection Based on Linear Waves Propagation over A Series of Rectangular Seabed

    Institute of Scientific and Technical Information of China (English)

    Chih-Chung WEN; Li-Hung TSAI

    2008-01-01

    A numerical model, Evolution Equation of Mild-Slope Equation (EEMSE) developed by Hsu et al. (2003), was applied to study the Bragg reflection of water waves over a series of rectangular seabed. Three key parameters of the Bragg reflection including the peak coefficient of primary Bragg reflection, its corresponding relative wavelength, and the bandwidth, have shown to be effective in describing the characteristics of the primary Bragg reflection. The characteristics of the Bragg reflection were investigated under the various conditions comprising number, height, and spacing interval of a series of rectangular seabed. The results reveal that the peak of Bragg reflection increases with the increase of rectangular seabed height and number, the bandwidth and the shift value of the Bragg reflection depend on the increase of the rectangular seabed height as well as the decrease of rectangular seabed number, and the relative rectangular seabed spacing in the rang of 3 and 4 could produce higher Bragg reflection. Finally, a correlative and regressive analysis is performed by use of the calculated data. Based on the results of the analysis, empirical equations were established. Our study results can provide an appropriate choice of a series of rectangular seabed field for a practical design.

  19. Modulation of Transmission Spectra of Anodized Alumina Membrane Distributed Bragg Reflector by Controlling Anodization Temperature

    OpenAIRE

    Zheng WenJun; Fei GuangTao; Wang Biao; Zhang Li

    2009-01-01

    Abstract We have successfully prepared anodized alumina membrane distributed Bragg reflector (DBR) using electrochemical anodization method. The transmission peak of this distributed Bragg reflector could be easily and effectively modulated to cover almost any wavelength range of the whole visible spectrum by adjusting anodization temperature.

  20. Modulation of Transmission Spectra of Anodized Alumina Membrane Distributed Bragg Reflector by Controlling Anodization Temperature

    Directory of Open Access Journals (Sweden)

    Zheng WenJun

    2009-01-01

    Full Text Available Abstract We have successfully prepared anodized alumina membrane distributed Bragg reflector (DBR using electrochemical anodization method. The transmission peak of this distributed Bragg reflector could be easily and effectively modulated to cover almost any wavelength range of the whole visible spectrum by adjusting anodization temperature.

  1. Imaging of an undulator source by phase circular Bragg-Fresnel lenses

    OpenAIRE

    Hartman, Ya.; Tarazona, E; Elleaume, P.; Snigireva, I.; Snigirev, A.

    1994-01-01

    Focusing properties and heatload resistance of a Bragg-Fresnel lens placed in an undulator beam have been demonstrated. The electron beam at an undulator source has been imaged by two setups using Bragg-Fresnel lenses. The first setup is a two-lenses telescope and the second one consists of one circular BFL and an asymmetrically cut crystal.

  2. Imaging of an undulator source by phase circular Bragg-Fresnel lenses

    International Nuclear Information System (INIS)

    Focusing properties and heatload resistance of a Bragg-Fresnel lens placed in an undulator beam have been demonstrated. The electron beam at an undulator source has been imaged by two setups using Bragg-Fresnel lenses. The first setup is a two-lenses telescope and the second one consists of one circular BFL and an asymmetrically cut crystal. (orig.)

  3. Fabrication of the Long Bragg Grating by Excimer Laser Micro Machining with High-Precision Positioning XXY Platform

    OpenAIRE

    Jian-Zhong Wu; Jian-Cin Chao; Jui-Yi Hu; Chia-Chin Chiang

    2014-01-01

    With the advancement of technology, the application of fiber Bragg grating is widely used as a Bragg grating sensor. Fiber Bragg grating is fabrication using excimer laser machining with the phase masker. The grating length is decided by the width of laser beam. In this paper, we proposed fabrication of the long Bragg grating by excimer Laser micro machining with a high-precision positioning XXY platform. The high-precision positioning XXY platform plays an important role for long FBG. It nee...

  4. Muscular condition monitoring system using fiber bragg grating sensors

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Heon Young; Lee, Jin Hyuk; Kim, Dae Hyun [Seoul National University of Technology, Seoul (Korea, Republic of)

    2014-10-15

    Fiber optic sensors (FOS) have advantages such as electromagnetic interference (EMI) immunity, corrosion resistance and multiplexing capability. For these reasons, they are widely used in various condition monitoring systems (CMS). This study investigated a muscular condition monitoring system using fiber optic sensors (FOS). Generally, sensors for monitoring the condition of the human body are based on electro-magnetic devices. However, such an electrical system has several weaknesses, including the potential for electro-magnetic interference and distortion. Fiber Bragg grating (FBG) sensors overcome these weaknesses, along with simplifying the devices and increasing user convenience. To measure the level of muscle contraction and relaxation, which indicates the muscle condition, a belt-shaped FBG sensor module that makes it possible to monitor the movement of muscles in the radial and circumferential directions was fabricated in this study. In addition, a uniaxial tensile test was carried out in order to evaluate the applicability of this FBG sensor module. Based on the experimental results, a relationship was observed between the tensile stress and Bragg wavelength of the FBG sensors, which revealed the possibility of fabricating a muscular condition monitoring system based on FBG sensors.

  5. A simple Bragg detector design for AMS and IBA applications

    Science.gov (United States)

    Müller, Arnold Milenko; Döbeli, Max; Seiler, Martin; Synal, Hans-Arno

    2015-08-01

    A new compact Bragg type gas ionization chamber (GIC) has been built for use as particle counter in AMS and IBA applications. The detector stands out due to its simple concept, which does not include a Frisch grid. Test experiments have been performed with ions in the mass range from He to Th and energies ranging from 30 keV to 2.5 MeV, in order to find optimal measurement conditions and to characterize the detector performance. For projectiles heavier than Al at energies below 2.5 MeV the obtained energy resolution is comparable with that of a state-of-the-art GIC with Frisch grid and clearly outperforms solid state detectors. Additionally the operation of this simplified Bragg GIC in the electron multiplication mode was investigated for the first time, which allows the detection of radiocarbon ions at energies below 50 keV with an energy resolution of the order of 10 keV.

  6. Muscular condition monitoring system using fiber bragg grating sensors

    International Nuclear Information System (INIS)

    Fiber optic sensors (FOS) have advantages such as electromagnetic interference (EMI) immunity, corrosion resistance and multiplexing capability. For these reasons, they are widely used in various condition monitoring systems (CMS). This study investigated a muscular condition monitoring system using fiber optic sensors (FOS). Generally, sensors for monitoring the condition of the human body are based on electro-magnetic devices. However, such an electrical system has several weaknesses, including the potential for electro-magnetic interference and distortion. Fiber Bragg grating (FBG) sensors overcome these weaknesses, along with simplifying the devices and increasing user convenience. To measure the level of muscle contraction and relaxation, which indicates the muscle condition, a belt-shaped FBG sensor module that makes it possible to monitor the movement of muscles in the radial and circumferential directions was fabricated in this study. In addition, a uniaxial tensile test was carried out in order to evaluate the applicability of this FBG sensor module. Based on the experimental results, a relationship was observed between the tensile stress and Bragg wavelength of the FBG sensors, which revealed the possibility of fabricating a muscular condition monitoring system based on FBG sensors.

  7. Self-consistent electrodynamic scattering in the symmetric Bragg case

    International Nuclear Information System (INIS)

    We have analyzed the symmetric Bragg case, introducing a model of self consistent scattering for two elliptically polarized beams. The crystal is taken as a set of mathematical planes, each of them defined by a surface density of dipoles. We have considered the mesofield and the epifield differently from that of the Ewald's theory and, we assumed a plane of dipoles and the associated fields as a self consistent scattering unit. The exact analytical treatment when applied to any two neighbouring planes, results in a general and self consistent Bragg's equation, in terms of the amplitude and phase variations. The generalized solution for the set of N planes was obtained after introducing an absorption factor in the incident radiation, in two ways: (i) the analytical one, through a rule of field similarity, which says that the incidence occurs in both faces of the all crystal planes and also, through a matricial development with the Chebyshev polynomials; (ii) using the numerical solution we calculated, iteratively, the reflectivity, the reflection phase, the transmissivity, the transmission phase and the energy. The results are showed through reflection and transmission curves, which are characteristics as from kinematical as dynamical theories. The conservation of the energy results from the Ewald's self consistency principle is used. In the absorption case, the results show that it is not the only cause for the asymmetric form in the reflection curves. The model contains basic elements for a unified, microscope, self consistent, vectorial and exact formulation for interpretating the X ray diffraction in perfect crystals. (author)

  8. Self-heated fiber Bragg grating sensors for cryogenic environments

    Science.gov (United States)

    Chen, Tong; Swinehart, Philip R.; Maklad, Mokhtar S.; Buric, Michael P.; Chen, Kevin P.

    2010-04-01

    Cryogenic fuels are often considered as major energy alternatives to coal and petroleum based fuels. Safe and reliable sensor networks are required for on-demand, real-time fuel management in cryogenic environments. In this paper, a new sensor design is described that enhances the low-temperature performance of fiber sensors. FBGs inscribed in high attenuation fiber (HAF) are used to absorb in-fiber power light to raise the local sensor temperature in the cryogenic environment. When in-fiber power light is turned off, FBG sensors can serve as passive sensors to gauge temperature and stress in the cryogenic system. When the in-fiber power light is turned on, the heated sensors can be used to rapidly gauge fuel level and fuel leaks. In one example, a hydrogen gas sensor is demonstrated with a palladium-coated fiber Bragg grating (FBG). The low-temperature performance of the sensor was improved by heating the gratings as much as 200 K above the ambient temperature, and hydrogen concentration well below the 4% explosion limit was measured at 123K. In a second example, an array of four aluminum coated fiber Bragg gratings was used to measure liquid level in a cryogenic environment.

  9. A simple Bragg detector design for AMS and IBA applications

    International Nuclear Information System (INIS)

    A new compact Bragg type gas ionization chamber (GIC) has been built for use as particle counter in AMS and IBA applications. The detector stands out due to its simple concept, which does not include a Frisch grid. Test experiments have been performed with ions in the mass range from He to Th and energies ranging from 30 keV to 2.5 MeV, in order to find optimal measurement conditions and to characterize the detector performance. For projectiles heavier than Al at energies below 2.5 MeV the obtained energy resolution is comparable with that of a state-of-the-art GIC with Frisch grid and clearly outperforms solid state detectors. Additionally the operation of this simplified Bragg GIC in the electron multiplication mode was investigated for the first time, which allows the detection of radiocarbon ions at energies below 50 keV with an energy resolution of the order of 10 keV

  10. Coastal zone

    International Nuclear Information System (INIS)

    The report entitled Climate Change Impacts and Adaptation : A Canadian Perspective, presents a summary of research regarding the impacts of climate change on key sectors over the past five years as it relates to Canada. This chapter on the coastal zone focuses on the impact of climate change on Canada's marine and Great Lakes coasts with tips on how to deal with the impacts associated with climate change in sensitive environments. This report is aimed at the sectors that will be most affected by adaptation decisions in the coastal zone, including fisheries, tourism, transportation and water resources. The impact of climate change in the coastal zone may include changes in water levels, wave patterns, storm surges, and thickness of seasonal ice cover. The Intergovernmental Panel on Climate Change projects global average sea level will rise between 9 and 88 centimetres between 1990 to 2100, but not all areas of Canada will experience the same rate of future sea level change. The main physical impact would be shoreline change that could result in a range of biophysical and socio-economic impacts, some beneficial, some negative. The report focuses on issues related to infrastructure and communities in coastal regions. It is noted that appropriate human adaptation will play a vital role in reducing the extent of potential impacts by decreasing the vulnerability of average zone to climate change. The 3 main trends in coastal adaptation include: (1) increase in soft protection, retreat and accommodation, (2) reliance on technology such as geographic information systems to manage information, and (3) awareness of the need for coastal adaptation that is appropriate for local conditions. 61 refs., 7 figs

  11. Detecting deformations in uncompacted strata by fiber Bragg grating sensors incorporated into GFRP

    Energy Technology Data Exchange (ETDEWEB)

    Chai, J.; Liu, J.X.; Qiu, B.A.; Li, Y.; Zhu, L.; Wei, S.M.; Wang, Z.P.; Zhang, G.W.; Yang, J.H. [Xian University of Science & Technology, Xian (China). School of Energy Engineering

    2011-01-15

    Coalfields based in east China, such as Huaibei, Datun, Xuzhou, Yanzhou, Yongxia and Huainan, have suffered paroxysmal shaft lining fracture and repeated deformation after repair in the last three decades. This phenomenon has required the development of fractured shaft lining repairing technology and a method for detecting rock strata settlement. It is proposed in this paper that, with the method of fiber Bragg grating sensor incorporated into GFRP, a sensing network of fiber Bragg grating wavelength division multiplexing (WDM)/spatial division multiplexing (SDM) mixing array composed of 18 fiber gratings is formed, and it is used for monitoring the settlement of uncompacted hydrous strata. It is the first time that the fiber Bragg grating sensing system is embedded into the 180-m deep uncompacted strata, and the field experiments are conducted at No. 3 Jingning Coal Mine. The layout of optical sensors, the fiber Bragg grating detecting system, the drilling of the borehole and the embedding method of fiber Bragg grating sensors are introduced. The monitoring results of fiber Bragg grating sensors are compared with groundwater level monitoring results. Engineering practice shows that the fiber Bragg grating sensors are working normally and they can be used to detect strain safely and stably.

  12. A fast response temperature sensor based on fiber Bragg grating

    International Nuclear Information System (INIS)

    Aimed at the requirement for a fast-response expendable ocean temperature sensor, this paper presents a new design scheme for an optic fiber sensor. Ocean temperature sensors require high sensitivity and high response speed, which must be up to milliseconds. The fiber Bragg grating (FBG) temperature sensor with high sensitivity has been declared in the last decade, but its response speed has been rarely reported. In this paper, a method is proposed which is to package an FBG with a metal tube. The response time of this sensor is 48.6 ms, which is an order of magnitude greater than that of an ordinary optical fiber temperature sensor. Temperature sensitivity is 27.6 pm/°C and the linearity is up to 0.9999. In addition, the sensor can be less than 15 mm. It offers a new way to detect ocean temperature. (paper)

  13. Humidity insensitive TOPAS polymer fiber Bragg grating sensor

    DEFF Research Database (Denmark)

    Yuan, Scott Wu; Khan, Lutul; Webb, David J.;

    2011-01-01

    We report the first experimental demonstration of a humidity insensitive polymer optical fiber Bragg grating (FBG), as well as the first FBG recorded in a TOPAS polymer optical fiber in the important low loss 850nm spectral region. For the demonstration we have fabricated FBGs with resonance...... wavelength around 850 nm and 1550 nm in single-mode microstructured polymer optical fibers made of TOPAS and the conventional poly (methyl methacrylate) (PMMA). Characterization of the FBGs shows that the TOPAS FBG is more than 50 times less sensitive to humidity than the conventional PMMA FBG in both...... wavelength regimes. This makes the TOPAS FBG very appealing for sensing applications as it appears to solve the humidity sensitivity problem suffered by the PMMA FBG....

  14. Prospects for solar axion searches with crystals via Bragg scattering

    International Nuclear Information System (INIS)

    A calculation of the expected signal due to Primakov coherent conversion of solar axions into photons via Bragg scattering in several solid-state detectors is presented and compared with present and future experimental sensitivities. The axion window ma > or approx. 0.03 eV (not accessible at present by other techniques) could be explored in the foreseeable future with crystal detectors to constrain the axion-photon coupling constant gaγγ below the latest bounds coming from helioseismology. On the contrary a positive signal in the sensitivity region of such devices would imply revisiting other more stringent astrophysical limits derived for the same range of the axion mass. The application of this technique to the COSME germanium detector which is taking data at the Canfranc Underground Laboratory leads to a 95% C.L. limit gaγγ ≤ 2.8 x 10-9 GeV-1

  15. Fiber Bragg grating strain sensor for hard rocks

    Science.gov (United States)

    Castro-Caicedo, Alvaro; Nieto-Callejas, María. J.; Torres, Pedro

    2015-09-01

    Strain is an important property to be measured in rock structures such as tunnels, slopes, dams, and mining. However, commercial surface mountable fiber Bragg grating (FBG) strain sensors are packaged in planar configuration, which is not appropriate for the irregular surface of the rocks since an unacceptable bonding layer fails to transfer the strain from the rock to the FBG. As a first approach to this problem, in this work we analyze packaged FBG sensors for cylindrical samples of hard rocks. A calibration process was carried out to evaluate the performance of the packaging and bonding layer as compared to electrical resistance strain gage methods. We show the importance of both packaging and bonding layer in FBG sensor technology for measuring strain in hard rocks.

  16. Wavefront distortion optimized with volume Bragg gratings in photothermorefractive glass.

    Science.gov (United States)

    Gao, Fan; Zhang, Xiang; Sun, Xiaojie; Yuan, Xiao

    2016-03-15

    The wavefront characteristics in 2D angular filtering on the basis of two orthogonal transmitting volume Bragg gratings (VBGs) is presented. The experimental results show that middle-high frequency wavefront distortions are efficiently suppressed with VBGs. The peak-valley value of the beam at a wavelength of 1053 nm reduces from 2.075λ to 0.209λ, and the root mean square value reduces from 0.207λ to 0.041λ. The wavefront power spectrum density shows that the wavefront distribution of the beam in medium and high frequencies is corrected by the VBGs. Additionally, the far-field distribution and focusing properties of the beam are improved. The beam Strehl ratio increases from 0.43 to 0.96, and the encircled energy improves from 95% energy at 4.01 mrad to 95% energy at 1.26 mrad. PMID:26977639

  17. Fiber Bragg grating demodulation through innovative numerical procedures

    Science.gov (United States)

    Dinardo, Giuseppe; Vacca, Gaetano

    2016-01-01

    The aim of this article is to introduce an innovative algorithm for the calculation of the shift of the maximum reflectivity wavelength of a Fiber Bragg Grating experiencing an applied strain. An accurate and precise evaluation of the FBG spectrum displacement is crucial for determining the amount of the physical quantity inducing such perturbations. The proposed method is based on the Fast Fourier Transform based Cross Correlation function. Such method is compared to Least Squares Fitting (LSF) and the centroid algorithms, pointing out remarkable improvements in accuracy, precision, and time consumption performance. In addition, a further improvement of the proposed algorithm is introduced. It consists in an iteratively performed Cross Correlation algorithm. It has been proved that such improvement leads to estimations characterized by better accuracy and precision, thanks also to a considerable reduction of the peak-locking effect due to the FBG spectral resolution.

  18. Bragg diffraction and the Iron crust of Neutron Stars

    CERN Document Server

    Llanes-Estrada, Felipe J

    2009-01-01

    If neutron stars have a thin atomic crystalline-iron crust, they must diffract X-rays of appropriate wavelength. So that the diffracted beam is visible from Earth, the illuminating source must be very intense and near the reflecting star. An example is a binary system with two neutron stars, one of them inert, the other an X-ray pulsar, in close orbit. The observable to be searched for is a secondary peak added (quasi-) periodically to the main X-ray pulse. The distinguishing feature of this secondary is that it appears at wavelengths related by simple integer numbers, lambda, lambda/2, lambda/3... lambda/n because of Bragg's diffraction law.

  19. Dynamic and static strain gauge using superimposed fiber Bragg gratings

    International Nuclear Information System (INIS)

    This paper demonstrates a simple and fast interrogation method for the dynamic and/or static strain gauge using a reflection spectrum from two superimposed fiber Bragg gratings (FBGs). The superimposed FBGs are designed to decrease nonequidistant space of generated a sensing pulse train in a time domain during dynamic strain gauge. By combining centroid finding with smooth filtering methods, both the interrogation speed and accuracy are improved. A four times increase in the interrogation speed of dynamic strain, by generating a 2 kHz optical sensing pulse train from a 500 Hz scanning frequency, is demonstrated experimentally. The interrogation uncertainty and total harmonic distortion characterization of superimposed FBGs are tested and less than 4 pm standard deviation is obtained. (paper)

  20. Fiber Bragg grating (FBG) sensors used in coal mines

    Science.gov (United States)

    Wang, Jinyu; Liu, Tongyu; Song, Guangdong; Xie, Hongjing; Li, Lianqing; Deng, Xiaolin; Gong, Zhijie

    2014-06-01

    The fiber Bragg grating (FBG) strain sensors were used for on-line monitoring of the stress variation of the lined wall in the gateway retained along the goaf of No. 3203 coal mining face in Dongtan Mine. The results showed that the FBG strain sensor with the wide measuring range could measure the stress variation accurately during the support process of the gateway retained along the goaf and could provide the basis to further optimize the support structure and to determine the support plan of the gateway retained along the goaf. The FBG micro-seismic sensors were used in Xinglong Mine to detect the micro-seismic signal. The signals were well received and analyzed to determine the location and energy level of the source of the micro-seismic event warning. The FBG sensors and detecting system show a significant potential for micro-seismic detection and geological disasters detection.

  1. Contact microphone using optical fibre Bragg grating technology

    International Nuclear Information System (INIS)

    A contact microphone using optical fibre Bragg grating has been developed. It enables one to listen and record a human voice and/or breathing by monitoring the vibration generated by the outer wall of the throat during speech. This system can have many applications such as detecting defects in vocal folds, measuring and monitoring the vibration and defection generated by intubations of a patient throat and other voice related problem, low level speaking recording and transmitting is also possible, the microphone can be also used to monitor breathing and the system can be used as a microphone in very harsh environments for example it would allow one to hear the patient during a cat scan

  2. Contact microphone using optical fibre Bragg grating technology

    Energy Technology Data Exchange (ETDEWEB)

    Bezombes, F A; Lalor, M J; Burton, D R [General Engineering Research Institute (GERI), Liverpool John Moores University, James Parsons Building, Byrom Street, Liverpool (United Kingdom)

    2007-07-15

    A contact microphone using optical fibre Bragg grating has been developed. It enables one to listen and record a human voice and/or breathing by monitoring the vibration generated by the outer wall of the throat during speech. This system can have many applications such as detecting defects in vocal folds, measuring and monitoring the vibration and defection generated by intubations of a patient throat and other voice related problem, low level speaking recording and transmitting is also possible, the microphone can be also used to monitor breathing and the system can be used as a microphone in very harsh environments for example it would allow one to hear the patient during a cat scan.

  3. Research of embedded fiber Bragg grating temperature sensor system

    Science.gov (United States)

    Hu, Ji; Wan, Shengpeng; Xie, Changlin; Zhang, Zhimin; Luo, Ningning; He, Shuai

    2010-10-01

    In this article, an embedded fiber Bragg grating temperature sensor system is proposed and researched. The demodulating system controls a Piezoelectric Ceramic (PZT) with sawteeth wave to scan the matching grating, then do photoelectric conversion using a detector, and use Digital Signal Processor (DSP) to find the max intensity. Meanwhile, use PZT drive voltage to control the central wavelength of sensor grating to demodulate. Then use the USB interface chip to realize the communication between DSP and the host computer, and send the collected data to the host computer. Finally, the real time temperature can be inquired and stored through the inquiring interface programmed by computer. The result demonstrates that this experimental system has the wave addressing range from 1540 to 1565 nm and the temperature resolution of 0.1°C.

  4. Focusing properties of ellipsoidal Bragg-Fresnel multilayer lenses

    International Nuclear Information System (INIS)

    Principles of calculation of the Bragg-Fresnel multilayer lenses (BFL) structure topology and the first results of test of ellipsoidal BFL using the Sibir'-1 synchrotron radiation source are presented. The picture of cross section of the rotation ellipsoids of the equal phase surfaces by the multilayer structure under the angle to the optical axis was used as the initial model of calculation of the BFL structure. As a result of this experiment, the pictures, reduced by a factor of 350, in the region of X-ray generation with 4.5 nm wavelength are obtained; focusing properties of ellipsoidal BFL with a circular form of a focal pit are demonstrated for the first time

  5. Fibre Bragg grating based accelerometer with extended bandwidth

    Science.gov (United States)

    Basumallick, Nandini; Biswas, Palas; Chakraborty, Rajib; Chakraborty, Sushanta; Dasgupta, Kamal; Bandyopadhyay, Somnath

    2016-03-01

    We have shown experimentally that the operable bandwidth of a fibre Bragg grating (FBG) based accelerometer can be extended significantly, without compromising its sensitivity, using a post-signal processing technique which involves frequency domain weighting. It has been demonstrated that using the above technique acceleration can be correctly interpreted even when the operating frequency encroaches on the region where the frequency response of the sensor is non-uniform. Two different excitation signals, which we often encounter in structural health monitoring applications, e.g. (i) a signal composed of multi-frequency components and (ii) a sinusoidal excitation with a frequency sweep, have been considered in our experiment. The results obtained have been compared with a piezo accelerometer.

  6. Remote (250 km Fiber Bragg Grating Multiplexing System

    Directory of Open Access Journals (Sweden)

    Manuel Lopez-Amo

    2011-09-01

    Full Text Available We propose and demonstrate two ultra-long range fiber Bragg grating (FBG sensor interrogation systems. In the first approach four FBGs are located 200 km from the monitoring station and a signal to noise ratio of 20 dB is obtained. The second improved version is able to detect the four multiplexed FBGs placed 250 km away, offering a signal to noise ratio of 6–8 dB. Consequently, this last system represents the longest range FBG sensor system reported so far that includes fiber sensor multiplexing capability. Both simple systems are based on a wavelength swept laser to scan the reflection spectra of the FBGs, and they are composed by two identical-lengths optical paths: the first one intended to launch the amplified laser signal by means of Raman amplification and the other one is employed to guide the reflection signal to the reception system.

  7. Notes on Evanescent Wave Bragg-Reflection Waveguides

    CERN Document Server

    Pressl, Benedikt

    2013-01-01

    We investigate an extended version of the Bragg reflection waveguide (BRW) with air gaps as one of the layers. This design has the potential of drastically simplifying the epitaxial structure for integrated nonlinear optical elements at the expense of more complicated structuring. This approach would afford much more flexibility for designing and varying BRW structures. Here, we discuss an extension of the established theory for BRW slabs and report our results of applying Marcatili's method for rectangular waveguides to the BRW case. With this analytic approach we can estimate the effective index of the modes orders of magnitudes faster than with full numerical techniques such as finite-difference time-domain (FDTD) or finite elements. Initial results are mixed; while phase-matched designs have been found, they currently have no significant advantage over other schemes.

  8. Pure Bending Characteristic of Tilted Fiber Bragg Grating

    Institute of Scientific and Technical Information of China (English)

    Bo Liu; Yin-Ping Miao; Hai-Bin Zhou; Qi-Da Zhao

    2008-01-01

    a novel structure of the pure macro-bending sensor based on the tilted fiber Bragg grating (TFBG) is proposed. The TFBG located in the half circle with the different diameters is bent at a constant angle with respect to the tilted grating planes. With the variations of the curvature, the core-mode resonance is unchanged and the transmission power of cladding modes detected by the photodiodes varies linearly with curvature, while the ghost mode changes by the form of two-order polynomial. So we can use the transmission power of ghost mode or other cladding modes to detect bending curvature as shape sensor. From a practical point of view, the sensor proposed here is simple, low cost and easy to implement. Moreover, it is possible to make a temperature-insensitive shape sensor due to the same temperature characteristic between the core mode and the cladding modes.

  9. Modulational instability in a fibre and a fibre Bragg grating

    International Nuclear Information System (INIS)

    In this review article, we study the influence of cross-phase modulation, higher order nonlinear effects such as self-steepening, self-induced Raman scattering and higher order dispersion effects such as third and fourth order dispersion on cross-phase modulational instability for a highly elliptical birefringent optical fibre, and obtain the conditions for the occurrence of cross-phase modulational instability in the normal dispersion regime. In addition, we also consider the pulse propagation through a fibre Bragg grating structure where we investigate the occurrence of modulational instability at the two edges of the photonic bandgap as well as on the upper and lower branches of the dispersion curves. (review article)

  10. Femtosecond soliton diode on heterojunction Bragg-grating structure

    CERN Document Server

    Deng, Zhigui; Li, Hongji; Fu, Shenhe; Liu, Yikun; Xiang, Ying; Li, Yongyao

    2016-01-01

    We numerically propose a scheme for realizing an all-optical femtosecond soliton diode based on a tailored heterojunction Bragg grating, which is designed by two spatially asymmetric chirped cholesteric liquid crystals. Our simulations demonstrate that with the consideration of optical nonlinearity, not only the femtosecond diode effect with nonreciprocal transmission ratio up to 120 can be achieved, but also the optical pulse evolving into soliton which maintains its shape during propagation through the sample is observed. Further, the influence of pulse width and the carrier wavelength to the femtosecond diode effect is also discussed in detail. Our demonstrations might suggest a new direction for experimentally realizing the femtosecond soliton diode based on the cholesteric liquid crystals.

  11. Direct UV-written planar Bragg grating sensors

    International Nuclear Information System (INIS)

    Integrated photonics is a proven platform for physical and chemical sensing. It offers miniaturised solutions that are suited for use in extreme environments, including strong EM-fields, EM-pulses and contact with flammable materials, often far exceeding electronic sensors in this regard. This review looks into direct UV-written planar Bragg grating technology and its application to integrated photonic sensors. The platform has been demonstrated widely for measurement of physical properties such as temperature, pressure and strain. In addition, by using an evanescent interaction, refractive index can be measured allowing for chemical and biochemical detection. Further to this, the platform has recently been utilised in quantum information processing, where quantum gate operations and single photon detection has been shown. (topical review)

  12. Vibration measurement of electrical machines using integrated fibre Bragg gratings

    Science.gov (United States)

    Fabian, M.; Borg Bartolo, J.; Ams, M.; Gerada, C.; Sun, T.; Grattan, K. T. V.

    2015-09-01

    In this paper a method to track the rotating force vector set up within the air-gap of radial flux rotating electrical machines using fibre Bragg gratings is reported. The proposed technique offers the potential for simultaneous rotor speed and position monitoring. This specific sensor design, together with other FBG-based multi-parameter measurements, is aimed to create an all-optical sensor solution for electrical machines, reducing the component count of existing systems and addressing noise issues traditionally associated with electrical sensors used. In this work, an optical fibre sensor system has been successfully integrated into an off-the-shelf four-pole 11kW induction motor.

  13. Fabrication of Dual-Wavelength Fiber Bragg Grating with a Longitudinal Stretch

    Institute of Scientific and Technical Information of China (English)

    JIANG Li; ZHANG Dong-sheng; ZHANG Wei-gang; KAI Gui-yun; DONG Xiao-yi

    2006-01-01

    A method of fabricating dual-wavelength fiber Bragg grating with a uniform phase mask is demonstrated.Theoretical analysis and numerical simulation using Matrix method arc given.The moving exposing technique is adopted.Good control over the grating's reflectivity and the separation of the two Bragg wavelengths is enabled by adjusting the stretch,the length of the grating,and the exposure.A grating with two equal transmission peaks of 19.5 dB is obtained by using this method,and the separation of the two Bragg wavelengths is 0.78 nm.

  14. Bragg-case section topography of growth defects in Si : Ge crystals

    International Nuclear Information System (INIS)

    The samples cut out from Si : Ge crystals with 3% and 1.2% of germanium were studied by means of synchrotron white beam Bragg-case section and projection topography as well as conventional transmission Lang topography. The obtained topographs revealed dominant contrast coming from the segregation of germanium. The use of Bragg-case section topography made possible to follow the shape of growth surfaces inside the crystal. The formation of contrast in Bragg-case section topographs for different orientation of growth surfaces with respect to the incident beam is discussed. The applied methods enabled also revealing growth surface instabilities occurring in some regions of Si : Ge crystals

  15. Planar waveguide tilted Bragg grating refractometer fabricated through physical micromachining and direct UV writing.

    Science.gov (United States)

    Holmes, Christopher; Carpenter, Lewis G; Rogers, Helen L; Sparrow, Ian J G; Gates, James C; Smith, Peter G R

    2011-06-20

    A set of rapid prototyping techniques are combined to construct a laterally-tilted Bragg grating refractometer in a novel planar geometry. The tilted Bragg grating is fabricated in a silica-on-silicon planar substrate using a dual beam direct UV writing (DUW) technique. Lateral cladding mode confinement is subsequently achieved by physically micromachining two trenches either side of the direct UV written waveguide. The resulting device is demonstrated as an effective refractometer, displaying a comparable sensitivity to tilted Bragg gratings in a fiber optical geometry, but with the added advantages of planar integration. PMID:21716485

  16. New imaging using pulsed neutron sources imaging of crystalline structural information by Bragg edge transmission spectroscopy

    International Nuclear Information System (INIS)

    Neutron imaging at a pulsed neutron source can simultaneously give position-dependent neutron transmission spectra of a material. 'Bragg edge' transmission pattern appears at low energy region of the spectrum. Since the Bragg edge transmission spectrum includes various crystalline structural information, e.g., crystal structure, crystalline phase, crystallographic texture, crystallite size and strain, the pulsed neutron imaging using a two-dimensional area detector can non-destructively visualize such the information over the wide area of a material. In this article, principles, features and experimental examples of the Bragg edge transmission imaging that is expected as a new analysis tool for materials science are presented. (author)

  17. Miniature fiber Bragg grating sensor interrogator (FBG-Transceiver) system

    Science.gov (United States)

    Mendoza, Edgar A.; Kempen, Cornelia; Lopatin, Craig

    2007-04-01

    This paper describes recent progress conducted towards the development of a miniature fiber Bragg grating sensor interrogator (FBG-Transceiver TM) system based on multi-channel integrated optic sensor (InOSense TM) microchip technology. The hybrid InOSense TM microchip technology enables the integration of all of the functionalities, both passive and active, of conventional bench top FBG sensor interrogator systems, packaged in a miniaturized, low power operation, 2-cm x 5-cm package suitable for the long-term structural health monitoring in applications where size, weight, and power are critical for operation. The FBG-Transceiver system uses active optoelectronic components monolithically integrated to the InOSense TM microchip, a microprocessor controlled signal processing electronics board capable of processing the FBG sensors signals related to stress-strain and temperature as well as vibration and acoustics. The FBG-Transceiver TM system represents a new, reliable, highly robust technology that can be used to accurately monitor the status of an array of distributed fiber optic Bragg grating sensors installed in critical infrastructures. Its miniature package, low power operation, and state-of-the-art data communications architecture, all at a very affordable price makes it a very attractive solution for a large number of SHM/NDI applications in aerospace, naval and maritime industry, civil structures like bridges, buildings and dams, the oil and chemical industry, and for homeland security applications. The miniature, cost-efficient FBG-Transceiver TM system is poised to revolutionize the field of structural health monitoring and nondestructive inspection market. The sponsor of this program is NAVAIR under a DOD SBIR contract.

  18. High-sensitivity temperature sensor based on Bragg grating in BDK-doped photosensitive polymer optical fiber

    Institute of Scientific and Technical Information of China (English)

    Xusheng Cheng; Weiwei Qiu; Wenxuan Wu; Yanhua Luo; Xiujie Tian; Qijin Zhang; Bing Zhu

    2011-01-01

    @@ A single-mode polymer optical fiber (POF) with highly photosensitive core doped with benzil dimethyl ketal (BDK) is fabricated and used for writing Bragg grating through the two-beam interference method. The Bragg wavelength of the grating is about 1570 nm, while the full-width at half-maximum (FWHM) of the reflection peak is 0.3 nm. The temperature response of POF Bragg grating is theoretically analyzed and experimentally measured in contrast to silica optical fiber Bragg grating (FBG). The result shows that the temperature character of POF Bragg grating is negative, which is opposite to the silica optical FBG. The absolute value of the temperature response of POF Bragg grating is one order of magnitude higher than that of the silica optical FBG, making POF Bragg grating appear to be very attractive for constructing temperature sensors with high resolution.%A single-mode polymer optical fiber (POF) with highly photosensitive core doped with benzil dimethyl ketal (BDK) is fabricated and used for writing Bragg grating through the two-beam interference method. The Bragg wavelength of the grating is about 1570 nm, while the full-width at half-maximum (FWHM) of the reflection peak is 0.3 nm. The temperature response of POF Bragg grating is theoretically analyzed and experimentally measured in contrast to silica optical fiber Bragg grating (FBG). The result shows that the temperature character of POF Bragg grating is negative, which is opposite to the silica optical FBG. The absolute value of the temperature response of POF Bragg grating is one order of magnitude higher than that of the silica optical FBG, making POF Bragg grating appear to be very attractive for constructing temperature sensors with high resolution.

  19. Study on Dual Bragg Wavelength Fiber Grating and Its Tuning Scheme

    Institute of Scientific and Technical Information of China (English)

    Dong Xingfa; Fu Shenggui; Zhang Hao; Kai Guiyun; Dong Xiaoyi

    2003-01-01

    Because of package, a single FBG has dual Bragg wavelength. One is sensitive to stress and the other is sensitive to temperature. By using the special mechanism, the wavelengths can be tuned by stress and temperature respectively.

  20. High Power Compact Single-Frequency Volume Bragg Er-Doped Fiber Laser Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This proposal is based on successful results of Phase I project where it was shown that the use of volume Bragg gratings in PTR glass as selectors of transverse and...

  1. Impact of Saturable Gain/Loss on Bistability of Nonlinear Parity-Time Bragg Gratings

    CERN Document Server

    Phang, Sendy; Susanto, Hadi; Benson, Trevor M; Sewell, Phillip

    2014-01-01

    We report on the impact of realistic gain and loss models on the bistable operation of nonlinear parity-time Bragg gratings. In our model we include both dispersive and saturable gain and show that levels of gain/loss saturation can have significant impact on the bistable operation of a nonlinear PT Bragg grating based on GaAs material. The hysteresis of the nonlinear PT Bragg grating is analyzed for different levels of gain and loss and different saturation levels. We show that high saturation levels can improve the nonlinear operation by reducing the intensity at which the bistability occurs. However when the saturation intensity is low, saturation inhibits PT phenomena in a nonlinear PT Bragg grating.

  2. Fiber sensing system based on a bragg grating and optical time domain reflectometry

    OpenAIRE

    Chin, Sanghoon; Thévenaz, Luc

    2013-01-01

    Optic fiber sensor characterized in that the sensing fiber is provided with a continuous Bragg grating covering the entire fiber length which is dedicated to sensing and along which spatially resolved measurements are performed.

  3. Development of a Fibre Bragg Grating Sensor for Rock Deformation Monitoring

    Science.gov (United States)

    Kanopoulos, Patrick Paskalis

    This thesis examines the theoretical and experimental performance of a fibre Bragg grating sensor for static and dynamic strain measurement in hard rock. A literature review focuses on the fundamental theory of fibre Bragg gratings, various physical demodulation schemes used to interrogate Bragg sensors with an emphasis on charge coupled device spectrometry, as well as the aliasing behaviour of Bragg gratings as sensors. A coupled numerical-analytical analysis is conducted on various sensor configurations designed for borehole deployment in order to establish the response of the strain sensors under various strain conditions. The findings of an experimental investigation of two sensors subjected to uniaxial strain within a grout and a rock specimen are presented. The experimental data confirm the feasibility of using the proposed sensor as a part of an integrated optical strain sensing network.

  4. Analysis of Sampled Fiber Bragg Grating Based on the Photonic Crystal Theory

    Institute of Scientific and Technical Information of China (English)

    ZHU Dan-dan

    2009-01-01

    One of the most basic characteristics of photonic crystal is frequency band gap.When defects are introduced into the periodic photonic crystal,a number of defect modes appear in the stop band.In this paper,we exploit transfer matrix method based on photonic crystal theory,and assume the sampled fiber Bragg grating as one-dimensional dual photonic crystal with a large size defect.Characteristics of the sampled fiber Bragg grating are analyzed.Experimental results show that the sampled fiber Bragg grating has many reflective peaks.Its reflectivity,center wavelength,reflective peak intervals and band width all change with the grating parameters,including grating length,duty ratio of the material with high dielectric constant,and index modulation depth and period.Results agree with the conventional couple mode theory which can be used when analyzing other characteristics of the sampled fiber Bragg grating or applying it into practice.

  5. Extending Bragg peak of heavy ion beam and melanoma cell inactivation measurement

    Institute of Scientific and Technical Information of China (English)

    LiQiang; WeiZeng-Quan; 等

    1998-01-01

    A rotating range modulator was designed and manufactured.which is applied to extend Bragg peak of heavy ion beam.Bragg curves of 75MeV/u 16O and 75MeV/u 12C ion beams through this range modulator were measured respectively and two evident spread-out Bragg peaks corresponding to the modulated beams above are shown.In addition,inactivation effect of the modulated 75MeV/u 16O ion beam at nine different penetration depths on melanoma cells(B16) was measured.Results indicate that lethal effects at the spread-out Bragg peak region are larger than at the plateau of the particle beam entrance.

  6. Fiber Bragg Grating (FBG) sensors as flatness and mechanical stretching sensors

    CERN Document Server

    Abbaneo, D; Abbrescia, M.; Abdelalim, A.A.; Abi Akl, M.; Aboamer, O.; Acosta, D.; Ahmad, A.; Ahmed, W.; Ahmed, W.; Aleksandrov, A.; Aly, R.; Altieri, P.; Asawatangtrakuldee, C.; Aspell, P.; Assran, Y.; Awan, I.; Bally, S.; Ban, Y.; Banerjee, S.; Barashko, V.; Barria, P.; Bencze, G.; Beni, N.; Benussi, L.; Bhopatkar, V.; Bianco, S.; Bos, J.; Bouhali, O.; Braghieri, A.; Braibant, S.; Buontempo, S.; Calabria, C.; Caponero, M.; Caputo, C.; Cassese, F.; Castaneda, A.; Cauwenbergh, S.; Cavallo, F.R.; Celik, A.; Choi, M.; Choi, S.; Christiansen, J.; Cimmino, A.; Colafranceschi, S.; Colaleo, A.; Conde Garcia, A.; Czellar, S.; Dabrowski, M.M.; De Lentdecker, G.; De Oliveira, R.; De Robertis, G.; Dildick, S.; Dorney, B.; Elmetenawee, W.; Endroczi, G.; Errico, F.; Fenyvesi, A.; Ferry, S.; Furic, I.; Giacomelli, P.; Gilmore, J.; Golovtsov, V.; Guiducci, L.; Guilloux, F.; Gutierrez, A.; Hadjiiska, R.M.; Hassan, A.; Hauser, J.; Hoepfner, K.; Hohlmann, M.; Hoorani, H.; Iaydjiev, P.; Jeng, Y.G.; Kamon, T.; Karchin, P.; Korytov, A.; Krutelyov, S.; Kumar, A.; Kim, H.; Lee, J.; Lenzi, T.; Litov, L.; Loddo, F.; Madorsky, A.; Maerschalk, T.; Maggi, M.; Magnani, A.; Mal, P.K.; Mandal, K.; Marchioro, A.; Marinov, A.; Masod, R.; Majumdar, N.; Merlin, J.A.; Mitselmakher, G.; Mohanty, A.K.; Mohamed, S.; Mohapatra, A.; Molnar, J.; Muhammad, S.; Mukhopadhyay, S.; Naimuddin, M.; Nuzzo, S.; Oliveri, E.; Pant, L.M.; Paolucci, P.; Park, I.; Passeggio, G.; Passamonti, L.; Pavlov, B.; Philipps, B.; Piccolo, D.; Pierluigi, D.; Postema, H.; Puig Baranac, A.; Radi, A.; Radogna, R.; Raffone, G.; Ranieri, A.; Rashevski, G.; Riccardi, C.; Rodozov, M.; Rodrigues, A.; Ropelewski, L.; RoyChowdhury, S.; Russo, A.; Ryu, G.; Ryu, M.S.; Safonov, A.; Salva, S.; Saviano, G.; Sharma, A.; Sharma, A.; Sharma, R.; Shah, A.H.; Shopova, M.; Sturdy, J.; Sultanov, G.; Swain, S.K.; Szillasi, Z.; Talvitie, J.; Tatarinov, A.; Tuuva, T.; Tytgat, M.; Vai, I.; Van Stenis, M.; Venditti, R.; Verhagen, E.; Verwilligen, P.; Vitulo, P.; Volkov, S.; Vorobyev, A.; Wang, D.; Wang, M.; Yang, U.; Yang, Y.; Yonamine, R.; Zaganidis, N.; Zenoni, F.; Zhang, A.

    2016-01-01

    A novel approach which uses Fibre Bragg Grating (FBG) sensors has been utilised to assess and monitor the flatness of Gaseous Electron Multipliers (GEM) foils. The setup layout and preliminary results are presented.

  7. Trends and future of fiber Bragg grating sensing technologies: tailored draw tower gratings (DTGs)

    Science.gov (United States)

    Lindner, E.; Hartung, A.; Hoh, D.; Chojetzki, C.; Schuster, K.; Bierlich, J.; Rothhardt, M.

    2014-05-01

    Today fiber Bragg gratings are commonly used in sensing technology as well as in telecommunications. Numerous requirements must be satisfied for their application as a sensor such as the number of sensors per system, the measurement resolution and repeatability, the sensor reusability as well as the sensor costs. In addition current challenges need to be met in the near future for sensing fibers to keep and extend their marketability such as the suitability for sterilization, hydrogen darkening or the separation of strain and temperature (or pressure and temperature). In this contribution we will give an outlook about trends and future of the fiber Bragg gratings in sensing technologies. Specifically, we will discuss how the use of draw tower grating technology enables the production of tailored Bragg grating sensing fibers, and we will present a method of separating strain and temperature by the use of a single Bragg grating only, avoiding the need for additional sensors to realize the commonly applied temperature compensation.

  8. High-speed two-dimensional laser scanner based on Bragg gratings stored in photothermorefractive glass.

    Science.gov (United States)

    Yaqoob, Zahid; Arain, Muzammil A; Riza, Nabeel A

    2003-09-10

    A high-speed free-space wavelength-multiplexed optical scanner with high-speed wavelength selection coupled with narrowband volume Bragg gratings stored in photothermorefractive (PTR) glass is reported. The proposed scanner with no moving parts has a modular design with a wide angular scan range, accurate beam pointing, low scanner insertion loss, and two-dimensional beam scan capabilities. We present a complete analysis and design procedure for storing multiple tilted Bragg-grating structures in a single PTR glass volume (for normal incidence) in an optimal fashion. Because the scanner design is modular, many PTR glass volumes (each having multiple tilted Bragg-grating structures) can be stacked together, providing an efficient throughput with operations in both the visible and the infrared (IR) regions. A proof-of-concept experimental study is conducted with four Bragg gratings in independent PTR glass plates, and both visible and IR region scanner operations are demonstrated. PMID:14503693

  9. Fiber Bragg Grating (FBG) sensors as flatness and mechanical stretching sensors

    Science.gov (United States)

    Abbaneo, D.; Abbas, M.; Abbrescia, M.; Abdelalim, A. A.; Abi Akl, M.; Aboamer, O.; Acosta, D.; Ahmad, A.; Ahmed, W.; Ahmed, W.; Aleksandrov, A.; Aly, R.; Altieri, P.; Asawatangtrakuldee, C.; Aspell, P.; Assran, Y.; Awan, I.; Bally, S.; Ban, Y.; Banerjee, S.; Barashko, V.; Barria, P.; Bencze, G.; Beni, N.; Benussi, L.; Bhopatkar, V.; Bianco, S.; Bos, J.; Bouhali, O.; Braghieri, A.; Braibant, S.; Buontempo, S.; Calabria, C.; Caponero, M.; Caputo, C.; Cassese, F.; Castaneda, A.; Cauwenbergh, S.; Cavallo, F. R.; Celik, A.; Choi, M.; Choi, S.; Christiansen, J.; Cimmino, A.; Colafranceschi, S.; Colaleo, A.; Conde Garcia, A.; Czellar, S.; Dabrowski, M. M.; De Lentdecker, G.; De Oliveira, R.; De Robertis, G.; Dildick, S.; Dorney, B.; Elmetenawee, W.; Endroczi, G.; Errico, F.; Fenyvesi, A.; Ferry, S.; Furic, I.; Giacomelli, P.; Gilmore, J.; Golovtsov, V.; Guiducci, L.; Guilloux, F.; Gutierrez, A.; Hadjiiska, R. M.; Hassan, A.; Hauser, J.; Hoepfner, K.; Hohlmann, M.; Hoorani, H.; Iaydjiev, P.; Jeng, Y. G.; Kamon, T.; Karchin, P.; Korytov, A.; Krutelyov, S.; Kumar, A.; Kim, H.; Lee, J.; Lenzi, T.; Litov, L.; Loddo, F.; Madorsky, A.; Maerschalk, T.; Maggi, M.; Magnani, A.; Mal, P. K.; Mandal, K.; Marchioro, A.; Marinov, A.; Masod, R.; Majumdar, N.; Merlin, J. A.; Mitselmakher, G.; Mohanty, A. K.; Mohamed, S.; Mohapatra, A.; Molnar, J.; Muhammad, S.; Mukhopadhyay, S.; Naimuddin, M.; Nuzzo, S.; Oliveri, E.; Pant, L. M.; Paolucci, P.; Park, I.; Passeggio, G.; Passamonti, L.; Pavlov, B.; Philipps, B.; Piccolo, D.; Pierluigi, D.; Postema, H.; Puig Baranac, A.; Radi, A.; Radogna, R.; Raffone, G.; Ranieri, A.; Rashevski, G.; Riccardi, C.; Rodozov, M.; Rodrigues, A.; Ropelewski, L.; RoyChowdhury, S.; Russo, A.; Ryu, G.; Ryu, M. S.; Safonov, A.; Salva, S.; Saviano, G.; Sharma, A.; Sharma, A.; Sharma, R.; Shah, A. H.; Shopova, M.; Sturdy, J.; Sultanov, G.; Swain, S. K.; Szillasi, Z.; Talvitie, J.; Tatarinov, A.; Tuuva, T.; Tytgat, M.; Vai, I.; Van Stenis, M.; Venditti, R.; Verhagen, E.; Verwilligen, P.; Vitulo, P.; Volkov, S.; Vorobyev, A.; Wang, D.; Wang, M.; Yang, U.; Yang, Y.; Yonamine, R.; Zaganidis, N.; Zenoni, F.; Zhang, A.

    2016-07-01

    A novel approach which uses Fiber Bragg Grating (FBG) sensors has been utilized to assess and monitor the flatness of Gaseous Electron Multipliers (GEM) foils. The setup layout and preliminary results are presented.

  10. Anomalous longitudinal mode hops in GaAs/AlGaAs distributed Bragg reflector lasers

    OpenAIRE

    Hofstetter, Daniel; Zappe, H. P.

    2008-01-01

    We investigate normal and anomalous longitudinal mode hops in GaAs/AlGaAs-based distributed Bragg reflector (DBR) lasers; anomalous mode hops are defined as those which move toward shorter wavelengths with increasing temperature, which is unexpected. The two-section DBR lasers discussed in this letter, consisting of a gain section and an unpumped Bragg reflector, typically exhibit one mode hop in a 10 K temperature range. Although the longer wavelength modes are expected to start lasing when ...

  11. Fiber-optical accelerometers based on polymer optical fiber Bragg gratings

    DEFF Research Database (Denmark)

    Yuan, Scott Wu; Stefani, Alessio; Bang, Ole;

    2010-01-01

    Fiber-optical accelerometers based on polymer optical fiber Bragg gratings (FBGs) are reported. We have written 3mm FBGs for 1550nm operation, characterized their temperature and strain response, and tested their performance in a prototype accelerometer.......Fiber-optical accelerometers based on polymer optical fiber Bragg gratings (FBGs) are reported. We have written 3mm FBGs for 1550nm operation, characterized their temperature and strain response, and tested their performance in a prototype accelerometer....

  12. An experimental approach to quantify strain transfer efficiency of fibre bragg grating sensors to host structures

    OpenAIRE

    C. Y. Wei; Ye, Chen-Chun; James, Stephen W.; Tatam, Ralph P.; Irving, Phil E.

    2001-01-01

    This paper developed a method to evaluate the strain transfer efficiency of fibre Bragg grating sensors to host structures. Various coatings were applied to fibre Bragg grating sensors after being fabricated. They were epoxy, silane agent and polypropylene, representing different surface properties. A neat epoxy resin plate was used as the host in which the coated fibre sensors were embedded in the central layer. The tensile strain output from the FBGs was compared with that...

  13. Uniform Fiber Bragg Grating modeling and simulation used matrix transfer method

    Directory of Open Access Journals (Sweden)

    Abdallah Ikhlef

    2012-01-01

    Full Text Available This paper presents the modeling and simulation of an optical fiber Bragg grating for maximum reflectivity, minimum side lobe. Gating length represents as one of the critical parameters in contributing to a high performance fiber Bragg grating. The reflection spectra and side lobes strength were analyzed with different lengths .The side lobes have been suppressed using raised cosine apodization while maintaining the peak reflectivity. Such simulations are based on solving coupled mode equations by transfer matrix method.

  14. Ionoacoustic tomography of the proton Bragg peak in combination with ultrasound and optoacoustic imaging

    OpenAIRE

    Stephan Kellnberger; Walter Assmann; Sebastian Lehrack; Sabine Reinhardt; Peter Thirolf; Daniel Queirós; George Sergiadis; Günther Dollinger; Katia Parodi; Vasilis Ntziachristos

    2016-01-01

    Ions provide a more advantageous dose distribution than photons for external beam radiotherapy, due to their so-called inverse depth dose deposition and, in particular a characteristic dose maximum at their end-of-range (Bragg peak). The favorable physical interaction properties enable selective treatment of tumors while sparing surrounding healthy tissue, but optimal clinical use requires accurate monitoring of Bragg peak positioning inside tissue. We introduce ionoacoustic tomography based ...

  15. Strain and temperature sensors using multimode optical fiber Bragg gratings and correlation signal processing

    OpenAIRE

    Lim, J; Yang, QP; Jones, BE; Jackson, PR

    2002-01-01

    Multimode fiber optic Bragg grating sensors for strain and temperature measurements using correlation signal processing methods have been developed. Two multimode Bragg grating sensors were fabricated in 62/125 m graded-index silica multimode fiber; the first sensor was produced by the holographic method and the second sensor by the phase mask technique. The sensors have signal reflectivity of approximately 35% at peak wavelengths of 835 nm and 859 nm, respectively. Strain testing...

  16. A temperature insensitive Bragg grating sensor - using orthogonal polar polarisation modes for in situ temperature compensation

    OpenAIRE

    Parker, R M; J.C.Gates; Grossel, M. C.; P.G.R.Smith

    2010-01-01

    An exposed Bragg grating incorporated into a planar waveguide forms an optical device that acts as a refractive index sensor. The exposed evanescent field causes the Bragg peak to be sensitive to the refractive index of its surroundings and can be used to detect changes in this environment. The method reported is able to provide accurate temperature compensation by applying a scaling factor derived from measurement of the birefringence of the transverse electric (TE) and transverse magnetic (...

  17. Karakterisasi Fiber Bragg Grating (FBG) Untuk Pengembangan Sistem Sensor Strain Tanah

    OpenAIRE

    Sinuhaji, Depi Santi

    2010-01-01

    Fiber Bragg Grating (FBG) is a periodic change of refractive index which is the length of optical fiber. Has been developed Fiber Bragg Grating (FBG)-based laser diodes for monitoring landslide-prone areas. This sensor has been developed because high sensitivity and is not affected by electromagnetic induction that can be placed at a distance from the location where the power supply and monitor. FBG transmission peak will shift when the grating is change resulting from a change in temperature...

  18. Practical biological spread-out Bragg peak design of carbon beam

    OpenAIRE

    Kim, Chang Hyeuk; Lee, Hwa-Ryun; Chang, Seduk; Jang, Hong Suk; Kim, Jeong Hwan; Park, Dong Wook; Hwang, Won Taek; Yang, Tea-Keun

    2015-01-01

    The carbon beams show more advantages on the biological properties compared with proton beams in radiation therapy. The carbon beam shows high linear energy transfer (LET) to medium and it increases the relative biological effectiveness (RBE). To design spread-out Bragg peak (SOBP) of biological dose using carbon beam, a practical method was purposed by using the linear-quadratic (LQ) model and Geant4 based Monte Carlo simulation code. The various Bragg peak profiles and LET was calculated fo...

  19. 100 GHz electrically tunable planar Bragg gratings via liquid crystal overlay

    OpenAIRE

    Adikan, F.R.Mahamd; J.C.Gates; Snow, B.D.; Dyadyusha, A.; Major, H.E.; Gawith, C.B.E.; Kaczmarek, M.; P.G.R.Smith

    2007-01-01

    We demonstrate 114GHz electrically tunable liquid crystal Bragg gratings using 170Vpp voltage. The devices were made using direct UV grating writing and use evanescent coupling into an electrically tuned nematic liquid crystal. Reconfigurable integrated optical devices are essential in today's dense and complex telecommunication meshes. A commonly employed component on the silica platform fulfilling the above role is a planar Bragg grating. The ability to tune the reflection peak of these gra...

  20. Uniform Fiber Bragg Grating modeling and simulation used matrix transfer method

    OpenAIRE

    Abdallah Ikhlef; Rachida Hedara; Mohamed Chikh-Bled

    2012-01-01

    This paper presents the modeling and simulation of an optical fiber Bragg grating for maximum reflectivity, minimum side lobe. Gating length represents as one of the critical parameters in contributing to a high performance fiber Bragg grating. The reflection spectra and side lobes strength were analyzed with different lengths .The side lobes have been suppressed using raised cosine apodization while maintaining the peak reflectivity. Such simulations are based on ...

  1. Numerical Analysis of Thermal Dependence of the Spectral Response of Polymer Optical Fiber Bragg Gratings

    OpenAIRE

    Hisham K. Hisham

    2016-01-01

    The thermal dependence of the spectral response (i.e. transmission, reflection and time delay (r) responses) of uniform polymer optical fiber (POF) Bragg gratings has been investigated. In addition to the temperature dependence, the effects of grating strength (kLg) and fiber index modulation (n) have been investigated. Besides high capability of tunable wavelength due to the unique large and negative thermo-optic coefficient of POF, the spectral response for POF Bragg gratings sh...

  2. Floquet-Bloch vs. Nicolson-Ross-Weir Extraction for Magneto-Dielectric Bragg Stacks

    DEFF Research Database (Denmark)

    Clausen, Niels Christian Jerichau; Arslanagic, Samel; Breinbjerg, Olav

    We extract and compare the permittivity and permeability from a dielectric and a magnetodielectric Bragg stack with the Floquet-Bloch (FB) method for the infinite stack and the Nicolson-Ross- Weir (NRW) method for the finite stack. While the extracted propagation constants are identical, the wave...... impedances are different. Moreover, the NRWmethod yields magnetic effects for the dielectric Bragg stack, while the FB method gives the expected vacuum permeability, also in the bandgab....

  3. Bragg transmission phase plates for the production of circularly polarized x-rays

    International Nuclear Information System (INIS)

    A thin-crystal Si (400) Bragg transmission x-ray phase plate has been constructed for the production of 5 to 12 keV circularly polarized x-rays. Using multiple beam diffraction from a GaAs crystal, a direct measurement of the degree of circular polarization as a function of off-Bragg position was made. These measurements indicated nearly complete circular polarization (|Pc| ≥ 0.95) and full helicity reversal on opposite sides of the rocking curve

  4. Fiber Bragg Gratings in Small-Core Ge-Doped Photonic Crystal Fibers

    Institute of Scientific and Technical Information of China (English)

    Yiping Wang; Hartmut Bartelt; Wolfgang Ecke; Reinhardt Willsch; Jens Kobelke; Michael Kautz; Sven Brueckner; Manfred Rothhardt

    2008-01-01

    This paper reports fiber Bragg gratings (FBGs) inscribed in a small-core Ge-doped photonic crystal fibers with a UV laser and a Talbot inter-ferometer. The responses of such FBGs to temper-ature, strain, bending, and transverse-loading were systematically investigated. The Bragg wavelength of the FBGs shifts toward longer wavelengths with increasing temperature, tensile strain, and trans-verse-loading. The bending and transverse- loading properties of the FBGs are sensitive to the fiber orientations.

  5. Efectos rotacionales en redes de Bragg en fibras ópticas

    OpenAIRE

    Arce Diego, José Luis; Muriel Fernández, Miguel Ángel; López Ruisánchez, Roberto; López Higuera, José Miguel

    1997-01-01

    The periodic mode coupling between the right and left circular polarization modes that is induced by a photoinduced fiber grating, with or without lineal birefringence, and with a magnetic field or a twist rate applied to it, is studied and analyzed through the use of the generalized coupled-mode theory. Several novel application of such devices as a fiber Bragg grating twist rate probe, a tuneable optical fiber based on twisted fiber Bragg grating, and an optical filter tuned by magnetic fie...

  6. Computer-Generated Holograms for Recording Multiple-Phase-Shifte Fiber Bragg Grating Corrugations

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    A new method of fabricating multiple-phase-shifte fiber Bragg grating by CGHs is proposed. The authors present an example of such CGH by which a section multiple-phase-shifte fiber Bragg grating with two π/2 phase shifts and grating length L=21.2 μm was produced. The authors describe the production process and finally give an example of a reconstructed fiber grating with two phase-shifts.

  7. Temperature sensor based on injection fiber Bragg grating laser with wavelength and temporal domain demodulation

    Science.gov (United States)

    Li, Qi; Huang, Kaiqiang; Chen, Haiyan

    2015-08-01

    A novel temperature sensor based on injection fiber Bragg grating laser with wavelength and temporal domain demodulation is proposed and demonstrated experimentally. The proof of concept device consists of a DFB laser modulated by a RF signal as injection light, a fiber Bragg grating laser, an optical spectrum analyzer, and a digital oscilloscope. The dynamic range of the proposed sensor is explored. The results demonstrate the new concept of temperature sensors and the technical feasibility for temperature measurement.

  8. Comparison of spatial harmonics in infinite and finite Bragg stacks for metamaterial homogenization

    DEFF Research Database (Denmark)

    Clausen, Niels Christian Jerichau; Arslanagic, Samel; Breinbjerg, Olav

    2014-01-01

    Metamaterial homogenization may be based on the dominance of a single Floquet-Bloch spatial harmonic in an infinite periodic structure - with the dominance quantified in terms of the relative magnitude of the associated spatial harmonic Poynting vector. For the corresponding finite structure...... of the corresponding infinite Bragg stack. This is even the case for finite Bragg stacks having only two unit cells; thus, the number of unit cells does not influence the homogenizability of this type of configuration. ©...

  9. Numerical Analysis of Thermal Dependence of the Spectral Response of Polymer Optical Fiber Bragg Gratings

    Directory of Open Access Journals (Sweden)

    Hisham K. Hisham

    2016-06-01

    Full Text Available The thermal dependence of the spectral response (i.e. transmission, reflection and time delay (r responses of uniform polymer optical fiber (POF Bragg gratings has been investigated. In addition to the temperature dependence, the effects of grating strength (kLg and fiber index modulation (n have been investigated. Besides high capability of tunable wavelength due to the unique large and negative thermo-optic coefficient of POF, the spectral response for POF Bragg gratings show high stability and larger spectrum bandwidth with temperature variation compare with the silica optical fiber (SOF Bragg gratings, especially with the increase of the kLg value. It was found that by increasing kLg, the peak reflectance value increases and the bandwidth of the Bragg reflector become narrower. Also it’s shown by increasing the kLg value, r deceasing significantly and reach its minimum value at the designed wavelength (B. Furthermore, the r for POF Bragg gratings is less than that for SOF Bragg gratings at the same value of kLg. Also it’s found that the peak reflectivity value increases to around 60% when the n value increases from 110-4 to 510-4.

  10. Bragg diffraction of fermions at optical potentials; Braggbeugung von Fermionen an optischen Potentialen

    Energy Technology Data Exchange (ETDEWEB)

    Deh, Benjamin

    2008-10-27

    This thesis describes the Bragg diffraction of ultracold fermions at an optical potential. A moving optical lattice was created, by overlaying two slightly detuned lasers. Atoms can be diffracted at this lattice if the detuning fulfills the Bragg condition for resting atoms. This Bragg diffraction is analyzed systematically in this thesis. To this end Rabi oscillations between the diffraction states were driven, as well in the weakly interacting Bragg regime, as in the strongly interacting Kapitza-Dirac regime. Simulations, based on a driven two-, respectively multilevel-system describe the observed effects rather well. Furthermore, the temporal evolution of the diffracted states in the magnetic trapping potential was studied. The anharmonicity of the trap in use and the scattering cross section for p-wave collisions in a {sup 6}Li system was determined from the movement of these states. Moreover the momentum distribution of the fermions was measured with Bragg spectroscopy and first signs of Fermi degeneracy were found. Finally an interferometer with fermions was build, exhibiting a coherence time of more than 100 {mu}s. With this, the possibility for measurement and manipulation of ultracold fermions with Bragg diffraction could bee shown. (orig.)

  11. Formularization and simulation of Bragg selectivity of readout signals in angular-multiplexing holographic data storage.

    Science.gov (United States)

    Ide, Tatsuro

    2016-04-01

    Bragg selectivity of readout signals in angular-multiplexing holographic data storage was investigated. The effects of degrading factors, namely, volume change, refractive-index change, and positional change (tilt and rotation) of a hologram, and the effects of compensating variables, namely, wavelength shift and reference-beam-angle shift, on Bragg selectivity were evaluated. Deviation of wave vectors of recovered pixels of a hologram from the Bragg condition under degrading factors and compensating variables, namely, Bragg mismatch, Δσ, was mathematically derived. Approximating Δσ by using the first-order Maclaurin series with respect to degrading factors and compensating variables revealed their effects on Bragg selectivity. The extent to which wavelength and angle of reference beam should be shifted to compensate for the degrading factors were determined. Then, readout images were simulated under multiple degrading factors and compensating variables. These simulated images were found to agree well with the experimentally obtained ones, which reveals the validity of the formalization of Bragg selectivity. PMID:27139671

  12. The Functionality of Fiber Bragg Grating Sensor Compared to that of Foil Gauge

    Directory of Open Access Journals (Sweden)

    Bashir A. Tahir

    2005-01-01

    Full Text Available Technology such as Fiber Bragg Grating (FBG sensors are widely accepted in almost all industries. FBG are being investigated for their applicability in other markets such as smart structures. Fiber optic sensors can also be used in many different applications. Fiber optic sensors are available in several types; among them, the Bragg grating sensor is being studied in this research. For this research work, the main focus was the use of fiber Bragg grating sensors for measuring strain. The key objective of this research; to determine the functionality of fiber Bragg grating sensors compared to that of conventional foil gauges. Fiber Bragg grating sensors were chosen for this research because they have a high potential for various uses in the monitoring of smart structures. The major incentives for this type of research are the current deterioration of civil structures in west Malaysia. The laboratory tests are being reported in this research work including tests of steel straps and an aluminum test specimen. In all the tests, strain was measured using the fiber Bragg grating sensors and compared to values from a conventional foil gauge. The results are being discussed in details. It was inferred that the use of fiber optic technology for the monitoring of civil structures is very promising and the future is sure to bring further advancements and improvements.

  13. Heavy ion induced damage to plasmid DNA: plateau region vs. spread out Bragg-peak

    Science.gov (United States)

    Dang, H. M.; van Goethem, M. J.; van der Graaf, E. R.; Brandenburg, S.; Hoekstra, R.; Schlathölter, T.

    2011-08-01

    We have investigated the damage of synthetic plasmid pBR322 DNA in dilute aqueous solutions induced by fast carbon ions. The relative contribution of indirect damage and direct damage to the DNA itself is expected to vary with linear energy transfer along the ion track, with the direct damage contribution increasing towards the Bragg peak. Therefore, 12C ions at the spread-out Bragg peak (dose averaged LET∞ = 189 ± 15 keV/ μm) and in the plateau region of the Bragg curve (LET = 40 keV/ μm) were employed and the radical scavenger concentration in the plasmid solution was varied to quantify the indirect effect. In order to minimize the influence of 12C break-up fragments, a relatively low initial energy of 90 MeV/nucleon was employed for the carbon ions. DNA damage has been quantified by subsequent electrophoresis on agarose gels. We find that strand breaks due to both indirect and direct effects are systematically higher in the plateau region as compared to the Bragg peak region with the difference being smallest at high scavenging capacities. In view of the fact that the relative biological effectiveness for many biological endpoints is maximum at the Bragg peak our findings imply that DNA damage at the Bragg peak is qualitatively most severe.

  14. Development of Bragg Gratings as Shear Stress Monitors in Aerodynamic >Facilities

    Science.gov (United States)

    Parmar, Devandra S.

    1998-04-01

    Two Bragg gratings centered at 1289.565 nm and 1299.432 nm were co-written in the core of a 9/125 telecommunications fiber doped with 10 weight percent germanium. The fiber was mounted in a 126 deep groove, with a 127 diameter semicircular bottom, etched in a flat metal plate used as the test model. A 1 thick epoxy layer bonded the fiber to the metal plate. A thermocouple was also attached to the metal plate in the vicinity of the Bragg fiber. The metal plate was next mounted in the test section of a subsonic wind tunnel. A skin friction balance was also mounted on the wall of the test section. As the wind speed in the tunnel was increased from 0 to 90 m/sec, reflected Bragg wavelengths and the fiber temperatures were recorded continuously. At a windspeed of 38.89 m/sec, the tunnel flow experienced a fan-induced turbulence registered by the skin friction balance as well as the Bragg signals. This commonality of the turbulence signal registration provided a unique calibration datum for the modulus of rigidity of the Bragg fiber assembly. This value of h has been used to calculate the values of shear stress at various tunnel speeds on the basis of Bragg wavelength changes at those speeds.

  15. Heavy ion induced damage to plasmid DNA: plateau region vs. spread out Bragg-peak

    Energy Technology Data Exchange (ETDEWEB)

    Dang, H.M.; Van Goethem, M.J.; Van der Graaf, E.R.; Brandenburg, S.; Hoekstra, R.; Schlatholtera, T. [KVI University of Groningen, Zernikelaan 25, 9747AA Groningen (Netherlands)

    2011-08-15

    We have investigated the damage of synthetic plasmid pBR322 DNA in dilute aqueous solutions induced by fast carbon ions. The relative contribution of indirect damage and direct damage to the DNA itself is expected to vary with linear energy transfer along the ion track, with the direct damage contribution increasing towards the Bragg peak. Therefore, {sup 12}C ions at the spread-out Bragg peak (dose averaged LET{sub {infinity} }= (189 {+-} 15) keV/{mu}m) and in the plateau region of the Bragg curve (LET = 40 keV/{mu}m) were employed and the radical scavenger concentration in the plasmid solution was varied to quantify the indirect effect. In order to minimize the influence of {sup 12}C break-up fragments, a relatively low initial energy of 90 MeV/nucleon was employed for the carbon ions. DNA damage has been quantified by subsequent electrophoresis on agarose gels. We find that strand breaks due to both indirect and direct effects are systematically higher in the plateau region as compared to the Bragg peak region with the difference being smallest at high scavenging capacities. In view of the fact that the relative biological effectiveness for many biological endpoints is maximum at the Bragg peak our findings imply that DNA damage at the Bragg peak is qualitatively most severe. (authors)

  16. Heavy ion induced damage to plasmid DNA: plateau region vs. spread out Bragg-peak

    International Nuclear Information System (INIS)

    We have investigated the damage of synthetic plasmid pBR322 DNA in dilute aqueous solutions induced by fast carbon ions. The relative contribution of indirect damage and direct damage to the DNA itself is expected to vary with linear energy transfer along the ion track, with the direct damage contribution increasing towards the Bragg peak. Therefore, 12C ions at the spread-out Bragg peak (dose averaged LET∞ = (189 ± 15) keV/μm) and in the plateau region of the Bragg curve (LET = 40 keV/μm) were employed and the radical scavenger concentration in the plasmid solution was varied to quantify the indirect effect. In order to minimize the influence of 12C break-up fragments, a relatively low initial energy of 90 MeV/nucleon was employed for the carbon ions. DNA damage has been quantified by subsequent electrophoresis on agarose gels. We find that strand breaks due to both indirect and direct effects are systematically higher in the plateau region as compared to the Bragg peak region with the difference being smallest at high scavenging capacities. In view of the fact that the relative biological effectiveness for many biological endpoints is maximum at the Bragg peak our findings imply that DNA damage at the Bragg peak is qualitatively most severe. (authors)

  17. Palladium coated fibre Bragg grating based hydrogen sensor

    International Nuclear Information System (INIS)

    Detection of steam generator leaks in fast nuclear reactors is carried out by monitoring hydrogen in argon cover-gas. Hydrogen released during sodium cleaning of fast reactor components is required to be monitored. Hydrogen sensors with good sensitivity, stability and response time are required for all the above applications. We report a new type of hydrogen sensor with a Fibre Bragg Grating (FBG) coated with palladium thin film which is used to detect the leak of hydrogen gas in the Steam Generator (SG) module of the Fast Breeder Reactor (FBR). If water leaks into sodium, it results in sodium-water reaction. In this reaction hydrogen and sodium hydroxide are formed. Due to the explosive risk of hydrogen system, hydrogen sensors are of great interest in this case. It is known that hydrogen forms an explosive mixture with air once its concentration exceeds beyond the explosion limit of four percent. The advantages of FBG based hydrogen sensor over the other hydrogen sensors are its inherent property of safety from sparking, immunity to ambient electromagnetic interference. The sensing mechanism in this device is based on mechanical strain that is induced in the palladium coating when it absorbs hydrogen. This process physically stretches the grating and causes the grating period and grating's refractive index, to change. The Bragg wavelength shift is directly proportional to the strain induced and can be directly related to the percentage of hydrogen exposure. The online monitoring of palladium thin film coating on FBG is carried out and recorded the wavelength change and strain induced on the FBG. A hydrogen sensor set up have been fabricated which consists of SS vessel of capacity 10 litres, provided with pressure gauge, Argon filling line with a valve, Hydrogen injection line with flange, a vent line with valve and Hydrogen sensor fixing point. The Palladium coated FBG based Hydrogen sensor is tested in this experimental facility in the exposure of hydrogen in

  18. Accuracy of needle position measurements using fiber Bragg gratings.

    Science.gov (United States)

    Henken, Kirsten; Van Gerwen, Dennis; Dankelman, Jenny; Van Den Dobbelsteen, John

    2012-11-01

    Accurate placement of the needle tip is essential in percutaneous therapies such as radiofrequency ablation (RFA) of liver tumors. Use of a robotic system for navigating the needle could improve the targeting accuracy. Real-time information on the needle tip position is needed, since a needle deflects during insertion in tissue. Needle shape can be reconstructed based on strain measurements within the needle. In the current experiment we determined the accuracy with which the needle tip position can be derived from strain measurements using Fiber Bragg Gratings (FBGs). Three glass fibers equipped with two FBGs each were incorporated in a needle. The needle was clamped at one end and deformed by applying static radial displacements at one or two locations. The FBG output was used for offline estimation of the needle shape and tip position. During deflections of the needle tip up to 12.5 mm, the tip position was estimated with a mean accuracy of 0.89 mm (std 0.42 mm). Adding a second deflection resulted in an error of 1.32 mm (std 0.48 mm). This accuracy is appropriate for applications such as RFA of liver tumors. The results further show that the accuracy can be improved by optimizing the placement of FBGs. PMID:22455615

  19. Investigation on Thermal-Induced Decay of Fiber Bragg Grating

    Science.gov (United States)

    Zhang, Peng; Ding, Pinyi; Liu, Li

    2015-06-01

    A fiber Bragg grating (FBG), with advantages such as high anti-interference ability, a simple structure, and multiplexing, is widely used as a core component in numerous applications to monitor adverse environments of high temperature and air pressure. When FBGs are exposed to these extreme conditions, especially high temperature, performance decay may occur, bringing serious impact on the stability and reliability of the instruments. Therefore, it is necessary to make a detailed analysis on the mechanism of the thermal-induced decay of a FBG. One commonly used theory is proposed by Erdogn, which is based on a power function and aging curve method. However, these empirical equations are limited in application because only one single type of FBG can be analyzed this way. This paper focuses on the mechanism of a FBG, and presents a detailed analysis on the theory of the thermal-induced decay of a FBG using the electron dipole mode. Theoretical relationships between reflectivity and time or temperature were obtained, and a corresponding thermal-induced decay testing system was designed. The experimental and theoretical reflectivity decline under different temperatures of and are plotted, and the curves of reduction derived from the theoretical model fit the experimental data well. Thus, this model can be applied to predict the performance decay of FBGs at high temperature.

  20. Nuclear Bragg diffraction of synchrotron x-rays

    International Nuclear Information System (INIS)

    In the last few years several groups have successfully carried out experiments involving the excitation of nuclear resonances using synchrotron radiation. All the experiments so far have used 57Fe as the resonant nucleus. The extremely narrow width of the 14.4 keV resonance in 57Fe makes these experiments very difficult at even the highest-brightness synchrotron beam lines currently available, so much effort is being devoted toward improvements in equipment and techniques. The general aim of this work is to use resonant scattering to produce high-flux beams of extremely monochromatic radiation, which can then be used as source beams for a variety of experiments. This talk, however, will stress the kinds of physics questions that can be answered using broad-band synchrotron radiation to induce resonant nuclear diffraction in perfect crystal samples. Experiments of this type are being carried out today, albeit with difficulty, using present synchrotron sources. They will become technically easy when advanced sources such as the APS become available, and it is expected that nuclear Bragg diffraction will become a standard technique

  1. Perimeter security alarm system based on fiber Bragg grating

    Science.gov (United States)

    Zhang, Cui; Wang, Lixin

    2010-11-01

    With the development of the society and economy and the improvement of living standards, people need more and more pressing security. Perimeter security alarm system is widely regarded as the first line of defense. A highly sensitive Fiber Bragg grating (FBG) vibration sensor based on the theory of the string vibration, combined with neural network adaptive dynamic programming algorithm for the perimeter security alarm system make the detection intelligently. Intelligent information processing unit identify the true cause of the vibration of the invasion or the natural environment by analyzing the frequency of vibration signals, energy, amplitude and duration. Compared with traditional perimeter security alarm systems, such as infrared perimeter security system and electric fence system, FBG perimeter security alarm system takes outdoor passive structures, free of electromagnetic interference, transmission distance through optical fiber can be as long as 20 km It is able to detect the location of event within short period of time (high-speed response, less than 3 second).This system can locate the fiber cable's breaking sites and alarm automatically if the cable were be cut. And the system can prevent effectively the false alarm from small animals, birds, strong wind, scattering things, snowfalls and vibration of sensor line itself. It can also be integrated into other security systems. This system can be widely used in variety fields such as military bases, nuclear sites, airports, warehouses, prisons, residence community etc. It will be a new force of perimeter security technology.

  2. Fiber Bragg grating sensors for strain monitoring of steelwork

    Science.gov (United States)

    Wang, Tao; He, Dawei; Yang, Fan; Wang, Yongsheng

    2009-11-01

    Over the last few years, fiber Bragg grating (FBG) sensors have attracted a lot of interest and they are being used in various applications. This paper describes the FBG sensors used for strain monitoring of bogie and other steelworks. FBG sensors and resistance strain gauges are set on different position of steel girder, and weight is loaded on the steel girder. Strain value of the steel girder can be caught by two kinds of sensors when weight loaded is changed. Result of experiment shows that strain value obtained by resistance strain gauges and FBG sensor is coinciding. There is a linear correlation between value of strain and the weight loaded on the steel girder. FBG sensors with different encapsulations are set on bogie by acrylic plastic materials in order to monitor its dynamic strains. When sinusoidal load with its frequency from 0.15Hz to 2Hz was set on the bogie, FBG sensor system with data sampling rate of 20Hz were used to monitoring the dynamic strains. Strain data caught by FBG sensor system can offer accurate description of dynamic strain, and value of strain provided by FBG sensor suits theoretical values well. The experimental observations show that FBG sensors can be set on steelworks easily, and can monitor both static strain and dynamic strains well.

  3. Integrated waveguide Bragg gratings for microwave photonics signal processing.

    Science.gov (United States)

    Burla, Maurizio; Cortés, Luis Romero; Li, Ming; Wang, Xu; Chrostowski, Lukas; Azaña, José

    2013-10-21

    Integrated Microwave photonics (IMWP) signal processing using Photonic Integrated Circuits (PICs) has attracted a great deal of attention in recent years as an enabling technology for a number of functionalities not attainable by purely microwave solutions. In this context, integrated waveguide Bragg grating (WBG) devices constitute a particularly attractive approach thanks to their compactness and flexibility in producing arbitrarily defined amplitude and phase responses, by directly acting on coupling coefficient and perturbations of the grating profile. In this article, we review recent advances in the field of integrated WBGs applied to MWP, analyzing the advantages leveraged by an integrated realization. We provide a perspective on the exciting possibilities offered by the silicon photonics platform in the field of MWP, potentially enabling integration of highly-complex active and passive functionalities with high yield on a single chip, with a particular focus on the use of WBGs as basic building blocks for linear filtering operations. We demonstrate the versatility of WBG-based devices by proposing and experimentally demonstrating a novel, continuously-tunable, integrated true-time-delay (TTD) line based on a very simple dual phase-shifted WBG (DPS-WBG). PMID:24150355

  4. Opto-acoustic behavior of coated fiber Bragg gratings.

    Science.gov (United States)

    Moccia, Massimo; Pisco, Marco; Cutolo, Antonello; Galdi, Vincenzo; Bevilacqua, Pierantonio; Cusano, Andrea

    2011-09-26

    In this paper, we present the study of the acousto-optic behavior of underwater-acoustic sensors constituted by fiber Bragg gratings (FBGs) coated by ring-shaped overlays. Via full-wave numerical simulations, we study the complex opto-acousto-mechanical interaction among an incident acoustic wave traveling in water, the optical fiber surrounded by the ring shaped coating, and the FBG inscribed the fiber, focusing on the frequency range 0.5-30 kHz of interest for SONAR applications. Our results fully characterize the mechanical behavior of an acoustically driven coated FBG, and highlight the key role played by the coating in enhancing significantly its sensitivity by comparison with a standard uncoated configuration. Furthermore, the hydrophone sensitivity spectrum exhibits characteristic resonances, which strongly improve the sensitivity with respect to its background (i.e., away from resonances) level. Via a three-dimensional modal analysis, we verify that the composite cylindrical structure of the sensor acts as an acoustic resonator tuned at the frequencies of its longitudinal vibration modes. In order to evaluate the sensor performance, we also carry out a comprehensive parametric analysis by varying the geometrical and mechanical properties of the coating, whose results also provide a useful design tool for performance optimization and/or tailoring for specific SONAR applications. Finally, a preliminary validation of the proposed numerical analysis has been carried out through experimental data obtained using polymeric coated FBGs sensors revealing a good agreement and prediction capability. PMID:21996827

  5. Photonic hydrophones based on coated fiber Bragg gratings

    International Nuclear Information System (INIS)

    The development of underwater acoustic sensors with performances competitive with conventional piezoelectric hydrophones would overcome intrinsic limitations related to the piezoceramic technology. Optical fiber technology represents a valid platform to implement acoustic sensors for underwater scenarios. Here we report on recent numerical and experimental results obtained with photonic hydrophones based on fiber-Bragg-grating (FBG) with ring shaped coatings. Our numerical results fully characterize the opto-acoustic response of the optical hydrophone, and highlight the key role played by the coating in enhancing significantly its sensitivity by comparison with a standard uncoated configuration. Furthermore, the analysis reveals that the hydrophone sensitivity spectrum exhibits characteristic resonances, which strongly improve the sensitivity with respect to its background level. Our experimental results confirmed the expected resonant behavior of such devices and are in good agreement with the numerical predictions. Optical hydrophones based on coated FBG exhibited an excellent capability to detect acoustic waves in the acoustic frequency range, with extremely high sensitivities. By comparison with bare FBGs, sensitivity enhancements of up to three orders of magnitude were found, demonstrating the effectiveness of polymeric coatings in tailoring the acoustic response of FBG-based hydrophones.

  6. Pipeline corrosion assessment using embedded Fiber Bragg grating sensors

    Science.gov (United States)

    Liang, Xiao; Huang, Ying; Galedari, Sahar Abuali; Azarmi, Fardad

    2015-04-01

    Corrosion is a leading cause of failure in metallic transmission pipelines. It significantly impacts the reliability and safety of metallic pipelines. An accurate assessment of corrosion status of the pipelines would contribute to timely pipeline maintenance and repair and extend the service life of the associated pipelines. To assess pipeline corrosion, various technologies have been investigated and the pipe-to-soil voltage potential measurement was commonly applied. However, remote and real-time corrosion assessment approaches are in urgent needs but yet achieved. Fiber optic sensors, especially, fiber Bragg gating (FBG) sensors, with unique advantages of real-time sensing, compactness, immune to EMI and moisture, capability of quasi-distributed sensing, and long life cycle, will be a perfect candidate for longterm pipeline corrosion assessment. In this study, FBG sensors are embedded inside pipeline external coating for corrosion monitoring of on-shore buried metallic transmission pipelines. Detail sensing principle, sensor calibration and embedment are introduced in this paper together with experimental corrosion evaluation testing ongoing. Upon validation, the developed sensing system could serve the purpose of corrosion monitoring to the numerous metallic pipelines across nation and would possibly reduce the pipeline corrosion induced tragedies.

  7. X-ray wavefront modeling of Bragg diffraction from crystals

    Science.gov (United States)

    Sutter, John P.

    2011-09-01

    The diffraction of an X-ray wavefront from a slightly distorted crystal can be modeled by the Takagi-Taupin theory, an extension of the well-known dynamical diffraction theory for perfect crystals. Maxwell's equations applied to a perturbed periodic medium yield two coupled differential equations in the incident and diffracted amplitude. These equations are discretized for numerical calculation into the determination of the two amplitudes on the points of an integration mesh, beginning with the incident amplitudes at the crystal's top surface. The result is a set of diffracted amplitudes on the top surface (in the Bragg geometry) or the bottom surface (in the Laue geometry), forming a wavefront that in turn can be propagated through free space using the Fresnel- Huygens equations. The performance of the Diamond Light Source I20 dispersive spectrometer has here been simulated using this method. Methods are shown for transforming displacements calculated by finite element analysis into local lattice distortions, and for efficiently performing 3-D linear interpolations from these onto the Takagi-Taupin integration mesh, allowing this method to be extended to crystals under thermal load or novel mechanical bender designs.

  8. Composite scarf repair monitoring using fiber Bragg grating sensors

    Science.gov (United States)

    Li, Henry C. H.; Herszberg, Israel; Davis, Claire E.; Stoddart, Paul R.

    2007-04-01

    Structural health monitoring (SHM) technology may be applied to composite bonded repairs to enable the continuous through-life assessment of the repair efficacy. This paper describes an SHM technique for the detection of debonding in composite scarf repairs using fibre optic Bragg grating strain sensors. A typical composite sandwich structure with a scarf repair on one surface is examined in this paper. A finite element study was conducted which showed that the strain in the debonded region changed significantly compared to the undamaged state. A differential strain approach was used to facilitate the detection of debonds, where two sensors were strategically positioned so that their strain differential increased as the damage propagated. With the use of matching gratings, this technique greatly reduced the support equipment requirement by converting the spectral information into an intensity-modulated signal, thus allowing a compact photodetector to be used for sensor interrogation. An experimental investigation was conducted to validate the theoretically predicted results. The experimental measurements agreed well with the numerical findings qualitatively, indicating that the proposed scheme has great potential as a simple and effective monitoring technique for composite scarf repairs.

  9. Fiber Optic Fabry-Perot Current Sensor Integrated with Magnetic Fluid Using a Fiber Bragg Grating Demodulation

    OpenAIRE

    Ji Xia; Qi Wang; Xu Liu; Hong Luo

    2015-01-01

    An optical fiber current sensor based on Fabry-Perot interferometer using a fiber Bragg grating demodulation is proposed. Magnetic fluid is used as a sensitive medium in fiber optical Fabry-Perot (F-P) cavity for the optical characteristic of magnetic-controlled refractive index. A Fiber Bragg grating (FBG) is connected after the F-P interferometer which is used to reflect the optical power at the Bragg wavelength of the interference transmission spectrum. The corresponding reflective power o...

  10. Integrated intensities in Laue-Bragg cases for non-absorbing crystals in X-ray dynamical diffraction

    International Nuclear Information System (INIS)

    Integrated power ratios in Laue-Bragg cases are obtained for non-absorbing crystals. The reciprocity theorem is used to show that wave fields on exit surfaces in Laue-Bragg cases are identical to crystal wave fields of the Bragg case. The formulae are expressed analytically by a combination of modified Bessel and Struve functions of the first order. (Abstract Copyright [2009], Wiley Periodicals, Inc.)

  11. Distribution of petroleum hydrocarbons and toluene biodegradation, Knox Street fire pits, Fort Bragg, North Carolina

    Science.gov (United States)

    Harden, S.L.; Landmeyer, J.E.

    1996-01-01

    An investigation was conducted at the Knox Street fire pits, Fort Bragg, North Carolina, to monitor the distribution of toluene, ethylbenzene, and xylene (TEX) in soil vapor, ground water, and ground-water/vapor to evaluate if total concentrations of TEX at the site are decreasing with time, and to quantify biodegradation rates of toluene in the unsaturated and saturated zones. Soil-vapor and ground-water samples were collected around the fire pits and ground-water/vapor samples were collected along the ground-water discharge zone, Beaver Creek, on a monthly basis from June 1994 through June 1995. Concentrations of TEX compounds in these samples were determined with a field gas chro- matograph. Laboratory experiments were performed on aquifer sediment samples to measure rates of toluene biodegradation by in situ micro- organisms. Based on field gas chromatographic analytical results, contamination levels of TEX compounds in both soil vapor and ground water appear to decrease downgradient of the fire-pit source area. During the 1-year study period, the observed temporal and spatial trends in soil vapor TEX concentrations appear to reflect differences in the distribution of TEX among solid, aqueous, and gaseous phases within fuel-contaminated soils in the unsaturated zone. Soil temperature and soil moisture are two important factors which influence the distribution of TEX com- pounds among the different phases. Because of the short period of data collection, it was not possible to distinguish between seasonal fluc- tuations in soil vapor TEX concentrations and an overall net decrease in TEX concentrations at the study site. No seasonal trend was observed in total TEX concentrations for ground- water samples collected at the study site. Although the analytical results could not be used to determine if ground-water TEX concen- trations decreased during the study at a specific location, the data were used to examine rate constants of toluene biodegradation. Based on

  12. Variable Depth Bragg Peak Method for Single Event Effects Testing

    Science.gov (United States)

    Buchner, S.; Kanyogoro, N.; Foster, C.; O'Neill, P.

    2011-01-01

    Traditionally, accelerator SEE testing is accomplished by removing the tops of packages so that the IC chips are accessible to heavy ions. However, ICs in some advanced packages cannot be de-lidded so a different approach is used that involves grinding and/or chemically etching away part of the package and the chip from the back side. The parts are then tested from the back side with ions having sufficient range to reach the sensitive volume. More recently, the entire silicon substrate in an SOI/SRAM was removed, making it possible to use low-energy ions with shorter ranges. Where removal of part of the package is not possible, facilities at Michigan State, NASA Space Radiation Laboratory, GANIL (France) and GSI (Germany) offer high-energy heavy ions with long ranges so that the ions can reach the devices' sensitive volumes without much change in the LET. Unfortunately, a run will typically involve only one ion species having a single energy and LET due to the long time it takes to tune a new energy. The Variable Depth Bragg Peak (VDBP) method is similar to the above method in that it involves the use of high-energy heavy ions that are able to pass through the packaging material and reach the device, obviating the need to remove the package. However, the method provides a broad range of LETs from a single ion by inserting degraders in the beam that modify the ion energy and, therefore, the LET. The crux of the method involves establishing a fiduciary point for degrader thickness, i.e., where the Bragg peak is located precisely at the sensitive volume in the device, for which the measured SEU cross-section and the ion LET are both also maxima and can be calculated using a Monte-Carlo program, TRIM. Once the fiduciary point has been established, calibrated high density polyethylene (HDPE) degraders are inserted into or removed from the beam to vary the ion LET at the device in a known manner. After each change of degrader thickness, the SEU cross-section is measured

  13. Using Dual-wavelength Fiber Bragg Gratings for Temperature and Strain Sensing at Cryogenic Temperature

    Science.gov (United States)

    Wu, Meng-Chou; Prosser, William H.; Rogowski, Robert S.; DeHaven, Stanton L.

    2003-01-01

    By using dual-wavelength fiber-optic Bragg gratings, a new technique has been developed for sensing both temperature and strain simultaneously in cryogenic temperature range. Two Bragg gratings with different wavelengths were inscribed at the same location in an optical fiber to form a dual-wavelength sensor. By measuring the wavelength shifts that resulted from the fiber being subjected to different temperatures and strains, the wavelength-dependent thermo-optic coefficients and photoelastic coefficients of the fiber were determined. These coefficients were used to construct the elements of the K matrix, which enables to determine inversely the strain and temperature changes by measuring the wavelength shifts of the dual-wavelength Bragg grating. In this study, measurements were made over the temperature range from room temperature down to about 10 K, addressing much of the low temperature range of cryogenic tanks. A structure transition of the optical fiber during the temperature change was found from about 70 K to 140 K. This transition caused splitting of the waveforms characterizing the Bragg gratings, and the determination of wavelength shifts was consequently complicated. Several alternatives are proposed to resolve this problem. The effectiveness and sensitivities of these measurements in different temperature ranges are discussed. The separation of two wavelengths for the dual-wavelength Bragg grating has been widened to increase the sensitivities of measurement; however, this separation can still be covered in the scanning range from single scanning laser.

  14. Effects of Coating and Diametric Load on Fiber Bragg Gratings as Cryogenic Temperature Sensors

    Science.gov (United States)

    Wu, meng-Chou; Pater, Ruth H.; DeHaven, Stanton L.

    2008-01-01

    Cryogenic temperature sensing was demonstrated using pressurized fiber Bragg gratings (PFBGs) with polymer coating of various thicknesses. The PFBG was obtained by applying a small diametric load to a regular fiber Bragg grating (FBG). The Bragg wavelengths of FBGs and PFBG were measured at temperatures from 295 K to 4.2 K. The temperature sensitivities of the FBGs were increased by the polymer coating. A physical model was developed to relate the Bragg wavelength shifts to the thermal expansion coefficients, Young's moduli, and thicknesses of the coating polymers. When a diametric load of no more than 15 N was applied to a FBG, a pressure-induced transition occurred at 200 K during the cooling cycle. The pressure induced transition yielded PFBG temperature sensitivities three times greater than conventional FBGs for temperatures ranging from 80 to 200 K, and ten times greater than conventional fibers for temperatures below 80 K. PFBGs were found to produce an increased Bragg wavelength shift of 2.2 nm compared to conventional FBGs over the temperature range of 4.2 to 300 K. This effect was independent of coating thickness and attributed to the change of the fiber thermo-optic coefficient.

  15. Adaptive Integrated Optical Bragg Grating in Semiconductor Waveguide Suitable for Optical Signal Processing

    Science.gov (United States)

    Moniem, T. A.

    2016-05-01

    This article presents a methodology for an integrated Bragg grating using an alloy of GaAs, AlGaAs, and InGaAs with a controllable refractive index to obtain an adaptive Bragg grating suitable for many applications on optical processing and adaptive control systems, such as limitation and filtering. The refractive index of a Bragg grating is controlled by using an external electric field for controlling periodic modulation of the refractive index of the active waveguide region. The designed Bragg grating has refractive indices programmed by using that external electric field. This article presents two approaches for designing the controllable refractive indices active region of a Bragg grating. The first approach is based on the modification of a planar micro-strip structure of the iGaAs traveling wave as the active region, and the second is based on the modification of self-assembled InAs/GaAs quantum dots of an alloy from GaAs and InGaAs with a GaP traveling wave. The overall design and results are discussed through numerical simulation by using the finite-difference time-domain, plane wave expansion, and opto-wave simulation methods to confirm its operation and feasibility.

  16. The influence of adhesive on fiber Bragg grating strain sensor

    Science.gov (United States)

    Chen, Jixuan; Gong, Huaping; Jin, Shangzhong; Li, Shuhua

    2009-08-01

    A fiber Bragg grating (FBG) sensor was fixed on the uniform strength beam with three adhesives, which were modified acrylate, glass glue and epoxy resin. The influence of adhesive on FBG strain sensor was investigated. The strain of FBG sensor was varied by loading weight to the uniform strength beam. The wavelength shift of the FBG sensor fixed by the three kinds of adhesive were measured with different weight at the temperatures 0°C, 10°C, 20°C, 30°C, 40°C. The linearity, sensitivity and their stability at different temperature of FBG sensor which fixed by every kind of adhesives were analyzed. The results show that, the FBG sensor fixed by the modified acrylate has a high linearity, and the linear correlation coefficient is 0.9996. It also has a high sensitivity which is 0.251nm/kg. The linearity and the sensitivity of the FBG sensor have a high stability at different temperatures. The FBG sensor fixed by the glass glue also has a high linearity, and the linear correlation coefficient is 0.9986, but it has a low sensitivity which is only 0.041nm/kg. The linearity and the sensitivity of the FBG sensor fixed by the glass glue have a high stability at different temperatures. When the FBG sensor is fixed by epoxy resin, the sensitivity and linearity is affected significantly by the temperature. When the temperature changes from 0°C to 40°C, the sensitivity decreases from 0.302nm/kg to 0.058nm/kg, and the linear correlation coefficient decreases from 0.9999 to 0.9961.

  17. Zone distillation: justification

    International Nuclear Information System (INIS)

    The features of zone distillation (with zone melting of refined material and with pulling of condensate) as a new purification method are shown. The method is based on similarity of equations of distillation and crystallization refining. The analogy between some distillation and condensation methods (particularly between zone distillation and zone re-crystallization) is should up

  18. Numerical investigation of slow solitons in Bragg gratings with a hyperbolic tangent apodization

    Institute of Scientific and Technical Information of China (English)

    Wang Kui-Ru; Cheng Jie-Lin; Sang Xin-Zhu; Chen Gong

    2011-01-01

    This paper numerically and analytically investigates the formation and propagation motion of optical soliton in the Bragg grating. We choose the fibre Bragg grating with hyperbolic tangent apodization in the middle section in order to obtain slower solitons. Optical fibre soliton but not Bragg grating soliton is used as input pulse in the discussion, which is much more approximate to the light source for the practical purpose. We discuss in detail the effects of the soliton's velocity with some parameters in the process of transmission. The results show that by choosing special parameters, one can make the soliton slow-down with a little distortion and energy decay and obtain tunable time-delay on a small scale.

  19. Simultaneous Temperature and Strain Sensing for Cryogenic Applications Using Dual-Wavelength Fiber Bragg Gratings

    Science.gov (United States)

    Wu, Meng-Chou; Prosser, William H.

    2003-01-01

    A new technique has been developed for sensing both temperature and strain simultaneously by using dual-wavelength fiber-optic Bragg gratings. Two Bragg gratings with different wavelengths were inscribed at the same location in an optical fiber to form a sensor. By measuring the wavelength shifts that resulted from the fiber being subjected to different temperatures and strains, the wavelength-dependent thermo-optic coefficients and photoelastic coefficients of the fiber were determined. This enables the simultaneous measurement of temperature and strain. In this study, measurements were made over the temperature range from room temperature down to about 10 K, addressing much of the low temperature range of cryogenic tanks. A structure transition of the optical fiber during the temperature change was found. This transition caused splitting of the waveforms characterizing the Bragg gratings, and the determination of wavelength shifts was consequently complicated. The effectiveness and sensitivities of these measurements in different temperature ranges are also discussed.

  20. Design of a Label-Free, Distributed Bragg Grating Resonator Based Dielectric Waveguide Biosensor

    Directory of Open Access Journals (Sweden)

    Florian Kehl

    2015-01-01

    Full Text Available In this work, we present a resonant, dielectric waveguide device based on distributed Bragg gratings for label-free biosensing applications. The refractive index sensitive optical transducer aims at improving the performance of planar waveguide grating sensor systems with limited Q-factor and dynamic range by combing the advantages of resonant cavities, such as a multitude of resonance peaks with high finesse, with the manageable complexity of waveguide grating couplers. The general sensor concept is introduced and supported by theoretical considerations as well as numerical simulations based on Coupled Mode Theory. In contrast to a single Bragg grating reflector, the presented Fabry-Pérot type distributed Bragg resonator exhibits an extended measurement range as well as relaxed fabrication tolerances. The resulting, relatively simple sensor structure can be fabricated with standard lithographic means and is independent of expensive light-sources and/or detectors, making an affordable but sensitive device, potentially suitable for point-of-care applications.

  1. Bragg band gaps tunability in an homogeneous piezoelectric rod with periodic electrical boundary conditions

    Science.gov (United States)

    Degraeve, S.; Granger, C.; Dubus, B.; Vasseur, J. O.; Pham Thi, M.; Hladky-Hennion, A.-C.

    2014-05-01

    An homogeneous piezoelectric rod is shown to exhibit Bragg band gaps when an electrical boundary condition is applied periodically with the help of metallic electrodes. An analytical model is developed which formulation depends on the applied electric boundary condition and reveals that Bragg band gaps occurring in this very peculiar phononic crystal are related to the electric charge located on the electrodes. Moreover, via an accurate boundary condition (electrodes connected in short circuit, in open circuit, or through an external capacitance), full tunability of the Bragg band gaps can be achieved. Measurements of ultrasonic transmission present an overall excellent agreement with the theoretical results. This phononic crystal can be easily manufactured and presents many potential applications as frequency filters especially for radio frequency telecommunications.

  2. A novel dual-wavelength fiber Bragg grating and its application in fiber ring laser

    Institute of Scientific and Technical Information of China (English)

    姜莉; 张东生; 董兴法; 开桂云; 董孝义

    2004-01-01

    A novel method for fabricating dual-wavelength fiber Bragg gratings (FBGs) by using one phase mask is developed. The method is based on a double-exposure technique. Our technique lends itself to writing gratings with controllable reflectivity and separation of two Bragg wavelengths. A grating with two equal transmission peaks of 20.25 dB is obtained by this method and the separation of the two Bragg wavelengths is about 0.8 nm. With the grating, we demonstrate a dual-wavelength erbium-doped fiber ring laser whose interval of the two peaks is 0.8 nm. The laser's peak powers can get 3.1 mW above and have a good stability.

  3. Characteristics of Bragg Gratings in All-Solid Photonic Bandgap Fiber

    Institute of Scientific and Technical Information of China (English)

    Bai-Ou Guan; Zhi Wang; Yang Zhang; Da Chen

    2008-01-01

    We report on fiber Bragg gratings in all-solid photonie bandgap fiber that was composed of a triangular array of high-index Ge-doped rods in pure silica background with fluorine-doped index-depressed layer surrounding the Ge-doped rod. Fiber Bragg gratings were photowritten with 193 nm ArF excimer laser and characterized for their response to strain, temperature, bending, and torsion. These gratings couple light from the forward core mode to not only backward core mode but also backward rod modes. This results in multiple resonance peaks in the reflection spectrum. All resonance wavelengths exhibited the same temperature and strain response with coefficient similar to that of Bragg gratings in standard single-mode fiber. The strength of the resonance peaks corresponding to the backward rod modes showed high sensitivity to bending and torsion.

  4. A Bragg beam splitter for hard x-ray free-electron lasers.

    Science.gov (United States)

    Osaka, Taito; Yabashi, Makina; Sano, Yasuhisa; Tono, Kensuke; Inubushi, Yuichi; Sato, Takahiro; Matsuyama, Satoshi; Ishikawa, Tetsuya; Yamauchi, Kazuto

    2013-02-11

    We report a Bragg beam splitter developed for utilization of hard x-ray free-electron lasers. The splitter is based on an ultrathin silicon crystal operating in the symmetric Bragg geometry to provide high reflectivity and transmissivity simultaneously. We fabricated frame-shaped Si(511) and (110) crystals with thicknesses below 10 μm by a reactive dry etching method using atmospheric-pressure plasma. The thickness variation over an illuminated area is less than 300 nm peak-to-valley. High crystalline perfection was verified by topographic and diffractometric measurements. The crystal thickness was evaluated from the period of the Pendellösung beats measured with a highly monochromatic and collimated x-ray probe. The crystals provide two replica pulses with uniform wavefront [(<1/50)λ] and low spatial intensity variation (<5%). These Bragg beam splitters will play an important role in innovating XFEL applications. PMID:23481739

  5. Bragg prism monochromator and analyser for super ultra-small angle neutron scattering studies

    Indian Academy of Sciences (India)

    Apoorva G Wagh; Sohrab Abbas; Markus Strobl; Wolfgang Treimer

    2008-11-01

    We have designed, fabricated and operated a novel Bragg prism monochromator–analyser combination. With a judicious choice of the Bragg reflection, its asymmetry and the apex angle of the silicon single crystal prism, the monochromator has produced a neutron beam with sub-arcsec collimation. A Bragg prism analyser with the opposite asymmetry has been tailored to accept a still sharper angular profile. With this optimized monochromator–analyser pair, we have attained the narrowest and sharpest neutron angular profile to date. At this facility, we have recorded the first SUSANS spectra spanning wave vector transfers ∼ 10−6 Å-1 to characterize samples containing agglomerates up to tens of micrometres in size.

  6. Development of tilted fibre Bragg gratings using highly coherent 255 nm radiation

    Indian Academy of Sciences (India)

    O Prakash; J Kumar; R Mahakud; U Kumbhkar; S V Nakhe; S K Dixit

    2014-02-01

    This paper reports the study on development of tilted fibre Bragg gratings using highly coherent 255 nm radiation, obtained from the second harmonic generation (SHG) of copper vapour laser (CVL). The transmission and reflection spectra of the tilted fibre Bragg gratings (TFBG) were studied for the tilt angles of 0° (normal FBG), 1°, 3° and 4° between the fibre axis and the interference fringe plane. It was observed that as the angle of fibre axis and phase mask increased, the main Bragg peak shifted towards the higher wavelength and transmission dip decreased. The transmission dip of the cladding mode first increased and then decreased after reaching a maximum with the increase in the tilt angle.

  7. All-Silica Hollow-Core Microstructured Bragg Fibers for Biosensor Application

    DEFF Research Database (Denmark)

    Passaro, Davide; Foroni, Matteo; Poli, Federica;

    2008-01-01

    The possibility to exploit all-silica hollow-core-microstructured Bragg fibers to realize a biosensor useful to detect the DNA hybridization process has been investigated. A Bragg fiber recently fabricated has been considered for the analysis performed by means of a full-vector modal solver based...... on the finite-element method. Since the DNA molecules necessary for the biosensor realization are in aqueous solution, it has been taken into account a microstructured fiber with water-filled holes. The dispersion curve and the confinement loss spectrum have been calculated in order to understand how...... a biofilm layer on the inner surface of the fiber holes can modify the fundamental mode properties. The numerical analysis results have successfully demonstrated the DNA bio-sensor feasibility in hollow-core Bragg fibers....

  8. Acoustical “transparency” induced by local resonance in Bragg bandgaps

    International Nuclear Information System (INIS)

    We show that sound waves can resonantly transmit through Bragg bandgaps in an acoustical duct periodically attached with an array of Helmholtz resonators, forming within the normally forbidden band a transparency window with group velocity smaller than the normal speed of sound. The transparency occurs for the locally resonant frequency so much close to the Bragg one that both the local-resonance-induced bandgap and the Bragg one heavily overlap with each other. The phenomenon seems an acoustical analog of the well-known electromagnetically induced transparency by quantum interference. Different from the Fano-like interference explanation, we also provide a mechanism for the transparency window phenomenon which makes it possible to extend the phenomenon in general

  9. Acoustical “transparency” induced by local resonance in Bragg bandgaps

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Gaokun; Wang, Xinlong, E-mail: xlwang@nju.edu.cn [Key Laboratory of Modern Acoustics and Institute of Acoustics, Nanjing University, Nanjing 210093 (China)

    2014-01-28

    We show that sound waves can resonantly transmit through Bragg bandgaps in an acoustical duct periodically attached with an array of Helmholtz resonators, forming within the normally forbidden band a transparency window with group velocity smaller than the normal speed of sound. The transparency occurs for the locally resonant frequency so much close to the Bragg one that both the local-resonance-induced bandgap and the Bragg one heavily overlap with each other. The phenomenon seems an acoustical analog of the well-known electromagnetically induced transparency by quantum interference. Different from the Fano-like interference explanation, we also provide a mechanism for the transparency window phenomenon which makes it possible to extend the phenomenon in general.

  10. Field analysis of TE and TM modes in photonic crystal Bragg fibers by transmission matrix method

    Directory of Open Access Journals (Sweden)

    M Hosseini Farzad

    2010-03-01

    Full Text Available In this article, we considered the field analysis in photonic crystal Bragg fibers. We apply the method of transmission matrix to calculater the dispersion curves, the longitudinal wave number over wave number versus incident wavelength, and the field distributions of TE and TM modes in the Bragg fiber. Our analysis shows that the field of guided modes is confined in the core and can exist only in particular wavelength bands corresponding to the band-gap of the periodic structure of the clad. From another point of view, light confinement is due to Bragg reflection from high-and low-refractive index layers of the clad. Also, the diagram of average angular frequency with respect to average longitudinal wave number is plotted so that the band gap regions of the clad are clearly observed.

  11. How reliable do fibre Bragg grating patches perform as strain sensors?

    Science.gov (United States)

    Schlüter, Vivien Gisela; Kusche, Nadine; Habel, Wolfgang R.

    2010-09-01

    In Germany, the first guideline for the use of fibre Bragg grating strain sensors, "Optical Strain Sensor based on Fibre Bragg Grating" [1], has been developed by the GESA guideline group of VDI "The Association of German Engineers" and published by Beuth Verlag. This guideline provides the basic specifications of these sensor types and the sensor characteristics which have to be known for a reliable sensor performance. In conformity to this guideline, experimental investigations on the strain transfer characteristics of fibre Bragg grating patches have been carried out. A comparison between patches and resistance strain gauges during tensile tests and combined temperature and tensile loading was carried out. The evaluated strain gauge factor and the temperature sensitivity of the strain gauge factor have been compared to the manufacturer's data. The overall performance of the patches has been evaluated. The experimental investigations showed that there are partial disagreements between the manufacturer's specifications and the observed characteristics.

  12. Real time monitoring of petroleum leakage detection using etched fiber Bragg grating

    Science.gov (United States)

    Shivananju, B. N.; Kiran, M.; Nithin, S. P.; Vidya, M. J.; Hegde, G. M.; Asokan, S.

    2013-06-01

    Detection of petroleum leakages in pipelines and storage tanks is a very important as it may lead to significant pollution of the environment, accidental hazards, and also it is a very important fuel resource. Petroleum leakage detection sensor based on fiber optics was fabricated by etching the fiber Bragg grating (FBG) to a region where the total internal reflection is affected. The experiment shows that the reflected Bragg's wavelength and intensity goes to zero when etched FBG is in air and recovers Bragg's wavelength and intensity when it is comes in contact with petroleum or any external fluid. This acts as high sensitive, fast response fluid optical switch in liquid level sensing, petroleum leakage detection etc. In this paper we present our results on using this technique in petroleum leakage detection.

  13. Omnidirectional mirror based on Bragg stacks with a periodic gain-loss modulation

    Energy Technology Data Exchange (ETDEWEB)

    Manzanares-Martinez, Jesus; Ham-Rodriguez, Carlos Ivan [Departamento de Investigacion en Fisica, Universidad de Sonora, Apartado Postal 5-088, Hermosillo, Sonora 83000 (Mexico); Moctezuma-Enriquez, Damian, E-mail: foxonicos@gmail.com [Centro de Investigacion en Materiales Avanzados (CIMAV), Miguel de Cervantes 120, Chihuahua 31109 (Mexico); Manzanares-Martinez, Betsabe [Departamento de Fisica, Universidad de Sonora, Blvd. Luis Encinas y Rosales, Hermosillo, Sonora 83000 (Mexico)

    2014-01-15

    In this work we demonstrate that a Bragg Stack with a periodic gain-loss modulation can function as an Omnidirectional Mirror (OM) with complete reflection at any angle of incidence irrespective of the light polarization. The Bragg Stack is composed by the periodic variation of two layers with the same value of the real part of the refractive index (n{sub r}) and a periodic modulation in the imaginary part (n{sub i}). The origin of the band gaps is due to the interference of complex waves with propagating and evanescent fields in each layer. It is found that the band gaps are wider as the contrast n{sub i}/n{sub r} increases. We have found the ambient conditions to obtain an OM considering an auxiliary medium n{sup ′} external to the Bragg Stack.

  14. Omnidirectional mirror based on Bragg stacks with a periodic gain-loss modulation

    Directory of Open Access Journals (Sweden)

    Jesus Manzanares-Martinez

    2014-01-01

    Full Text Available In this work we demonstrate that a Bragg Stack with a periodic gain-loss modulation can function as an Omnidirectional Mirror (OM with complete reflection at any angle of incidence irrespective of the light polarization. The Bragg Stack is composed by the periodic variation of two layers with the same value of the real part of the refractive index (nr and a periodic modulation in the imaginary part (ni. The origin of the band gaps is due to the interference of complex waves with propagating and evanescent fields in each layer. It is found that the band gaps are wider as the contrast ni/nr increases. We have found the ambient conditions to obtain an OM considering an auxiliary medium n′ external to the Bragg Stack.

  15. Numerical investigation of slow solitons in Bragg gratings with a hyperbolic tangent apodization

    International Nuclear Information System (INIS)

    This paper numerically and analytically investigates the formation and propagation motion of optical soliton in the Bragg grating. We choose the fibre Bragg grating with hyperbolic tangent apodization in the middle section in order to obtain slower solitons. Optical fibre soliton but not Bragg grating soliton is used as input pulse in the discussion, which is much more approximate to the light source for the practical purpose. We discuss in detail the effects of the soliton's velocity with some parameters in the process of transmission. The results show that by choosing special parameters, one can make the soliton slow-down with a little distortion and energy decay and obtain tunable time-delay on a small scale. (electromagnetism, optics, acoustics, heat transfer, classical mechanics, and fluid dynamics)

  16. Clear as Crystal: The Story of the Braggs--How X-Ray Crystallography Has Contributed to Science

    Science.gov (United States)

    George, Robert; Patterson, John

    2014-01-01

    Here is a brief history of the work of two of Australia's most famous scientists, Sir William Bragg and his son Sir Lawrence Bragg. Jointly awarded the Nobel Prize in 1915 for their groundbreaking research into the use of X-rays to study the chemical structure and function of molecules, they have contributed to our heritage and to science at…

  17. Fabrication and Characterization of On-Chip Integrated Silicon Photonic Bragg Grating and Photonic Crystal Cavity Thermometers

    OpenAIRE

    Klimov, Nikolai N.; Purdy, Thomas; Ahmed, Zeeshan

    2015-01-01

    We report on the fabrication and characterization of photonic-based nanothermometers, a silicon photonic Bragg grating and photonic crystal cavity. When cladded with silicon dioxide layer the sensors have at least eight times better sensitivity compared to the sensitivity of conventional fiber Bragg grating sensors. We demonstrate that these photonic thermometers are a viable temperature sensing solution.

  18. Fiber Bragg gratings in the radiation environment: Change under the influence of radiolytic hydrogen

    International Nuclear Information System (INIS)

    The change of the transmission spectra of fiber Bragg gratings written in the optical fibers, whose silica cores are doped with either germanium or nitrogen, is studied experimentally under the influence of gamma-radiation. The transmission spectra in the neighborhood of the resonance (Bragg) wavelengths were regularly recorded “in-situ” in the course of irradiation during 24 days. For this purpose, uncoated gratings were placed in a pool near the spent fuel rods of a nuclear reactor. The fibers with the gratings written in them were in immediate contact with water. The estimated total absorbed radiation dose of the fibers is approximately 5 MGy. Molecular hydrogen, which is produced by radiolysis of water and penetrates into the core of silica fiber, is found to interact with the defects of Ge-doped silica induced by gamma-radiation, thereby causing a strong impact on the parameters of the spectrum of the Bragg gratings. On the contrary, in the case of gratings inscribed in N-doped silica fibers, the hydrogen molecules interact with defects induced in the course of laser UV exposure during the grating writing only. The possible subsequent formation of additional defects in N-doped silica under the influence of gamma-radiation has no substantial impact on the transmission spectra of Bragg gratings, which remained stable. The obtained results suggest that a small amount of molecular hydrogen resided in the fiber core is the main source of radiation instability of Ge-doped fiber Bragg grating sensors in radiation environments. These hydrogen molecules can remain in the Bragg gratings, in particular, after the inscription process in the hydrogen-loaded fibers

  19. Distributed bragg reflector resonators with cylindrical symmetry and extremely high Q-factors.

    Science.gov (United States)

    Tobar, Michael E; le Floch, Jean-Michel; Cros, Dominique; Hartnett, John G

    2005-01-01

    A simple non-Maxwellian method is presented that allows the approximate solution of all the dimensions of a multilayered dielectric TE0qp mode cylindrical resonant cavity that constitutes a distributed Bragg reflection (DBR) resonator. The analysis considers an arbitrary number of alternating dielectric and free-space layers of cylindrical geometry enclosed by a metal cylinder. The layers may be arranged along the axial direction, the radial direction, or both. Given only the aspect ratio of the cavity, the desired frequency and the dielectric constants of the material layers, the relevant dimensions are determined from only a set of simultaneous equations, and iterative techniques are not required. The formulas were verified using rigorous method of lines (MoL) calculations and previously published experimental work. We show that the simple approximation gives dimensions close to the values of the optimum Bragg reflection condition determined by the rigorous analysis. The resulting solution is more compact with a higher Q-factor when compared to other reported cylindrical DBR structures. This is because it properly takes into account the effect of the aspect ratio on the Bragg antiresonance condition along the z-axis of the resonator. Previous analyses assumed the propagation in the z-direction was independent of the aspect ratio, and the layers of the Bragg reflector were a quarter of a wavelength thick along the z-direction. When the aspect ratio is properly taken into account, we show that the thickness of the Bragg reflectors are equivalent to the thickness of plane wave Bragg reflectors (or quarter wavelength plates). Thus it turns out that the sizes of the reflectors are related to the free-space propagation constant rather than the propagation constant in the z-direction. PMID:15742559

  20. Air core Bragg fibers for delivery of near-infrared laser radiation

    Science.gov (United States)

    Jelínek, Michal; Frank, Milan; Kubeček, Václav; Matějec, Vlastimil; Kašík, Ivan; Podrazký, Ondřej

    2014-12-01

    Optical fibers designed for high power laser radiation delivery represent important tools in medicine, solar systems, or industry. For such purposes several different types of glass optical fibers such as silica, sapphire, or chalcogenide ones as well as hollow-glass fibers, photonic crystal fibers and Bragg fibers have been investigated. Air-core Bragg fibers or photonic crystal fibers offer us the possibility of light transmission in a low dispersive material - air having a high damage threshold and small non-linear coefficient. However, preforms for drawing Bragg fibers can be fabricated by MCVD method similarly as preforms of standard silica fibers. In this paper we present fundamental characteristics of laboratory-designed and fabricated Bragg fibers with air cores intended for delivery of laser radiation at a wavelength range from 0.9 to 1.5 μm. Bragg fibers with different air core diameters of 5, 45 and 73 mm were prepared. The fiber core was surrounded by three pairs of circular Bragg layers. Each pair was composed of one layer with a high and one layer with a low refractive index with a contrast up to 0.03. Several laser sources emitting at 0.975, 1.06, and 1.55 μm were used as radiation sources. Attenuation coefficients, overall transmissions, bending losses, and spatial profiles of output beams from fibers were determined at these wavelengths. The lowest attenuation coefficient of 70 dB/km was determined for the 45 μm and 73 mm air-core fiber when radiation from a laser was launched into the fibers by using optical lenses. However, multimodal transmission has been observed in such condition. It has also been found that bending losses of such fibers are negligible for bending diameters higher than 15 mm.

  1. Fiber Bragg gratings in the radiation environment: Change under the influence of radiolytic hydrogen

    Energy Technology Data Exchange (ETDEWEB)

    Butov, Oleg V., E-mail: obutov@mail.ru; Golant, Konstantin M. [Kotel' nikov Institute of Radio-Engineering and Electronics of RAS, 11-7 Mokhovaya Str., Moscow 125009 (Russian Federation); Shevtsov, Igor' A.; Fedorov, Artem N. [Prolog LLC, PO Box 3007, Obninsk, the Kaluga Region 249033 (Russian Federation)

    2015-08-21

    The change of the transmission spectra of fiber Bragg gratings written in the optical fibers, whose silica cores are doped with either germanium or nitrogen, is studied experimentally under the influence of gamma-radiation. The transmission spectra in the neighborhood of the resonance (Bragg) wavelengths were regularly recorded “in-situ” in the course of irradiation during 24 days. For this purpose, uncoated gratings were placed in a pool near the spent fuel rods of a nuclear reactor. The fibers with the gratings written in them were in immediate contact with water. The estimated total absorbed radiation dose of the fibers is approximately 5 MGy. Molecular hydrogen, which is produced by radiolysis of water and penetrates into the core of silica fiber, is found to interact with the defects of Ge-doped silica induced by gamma-radiation, thereby causing a strong impact on the parameters of the spectrum of the Bragg gratings. On the contrary, in the case of gratings inscribed in N-doped silica fibers, the hydrogen molecules interact with defects induced in the course of laser UV exposure during the grating writing only. The possible subsequent formation of additional defects in N-doped silica under the influence of gamma-radiation has no substantial impact on the transmission spectra of Bragg gratings, which remained stable. The obtained results suggest that a small amount of molecular hydrogen resided in the fiber core is the main source of radiation instability of Ge-doped fiber Bragg grating sensors in radiation environments. These hydrogen molecules can remain in the Bragg gratings, in particular, after the inscription process in the hydrogen-loaded fibers.

  2. A Directly-Written Monolithic Waveguide-Laser Incorporating a DFB Waveguide-Bragg Grating

    CERN Document Server

    Marshall, Graham D; Ams, Martin; Piper, James A; Withford, Michael J

    2008-01-01

    We report the fabrication and performance of the first C-band directly-written monolithic waveguide-laser. The waveguide-laser device was created in an Erbium and Ytterbium doped phosphate glass host and consisted of an optical waveguide that included a distributed feedback Bragg grating structure. The femtosecond laser direct-write technique was used to create both the waveguide and the waveguide-Bragg grating simultaneously and in a single processing step. The waveguide-laser was optically pumped at approximately 980 nm and lased at 1537nm with a bandwidth of less than 4 pm.

  3. Time-dependent Bragg diffraction and short-pulse reflection by one-dimensional photonic crystals

    CERN Document Server

    André, Jean-michel

    2015-01-01

    The time-dependence of the Bragg diffraction by one-dimensional photonic crystals and its influence on the short pulse reflection are studied in the framework of the coupled- wave theory. The indicial response of the photonic crystal is calculated and it appears that it presents a time-delay effect with a transient time conditioned by the extinction length. A numerical simulation is presented for a Bragg mirror in the x-ray domain and a pulse envelope modelled by a sine-squared shape. The potential consequences of the time-delay effect in time-dependent optics of short-pulses are emphasized.

  4. A high sensitive fiber Bragg grating strain sensor with automatic temperature compensation

    Institute of Scientific and Technical Information of China (English)

    Kuo Li; Zhen'an Zhou

    2009-01-01

    A high sensitive fiber Bragg grating (FBG) strain sensor with automatic temperature compensation is demonstrated. FBG is axially linked with a stick and their free ends are fixed to the measured object. When the measured strain changes, the stick does not change in length, but the FBG does. When the temperature changes, the stick changes in length to pull the FBG to realize temperature compensation. In experiments, 1.45 times strain sensitivity of bare FBG with temperature compensation of less than 0.1 nm Bragg wavelength drift over 100℃ shift is achieved.

  5. Novel Distributed Fiber Bragg Grating Sensing System Based on M-Z Interferometer

    Institute of Scientific and Technical Information of China (English)

    WU Guo-qing; BI Wei-hong; LI Hong

    2005-01-01

    One of the problems in using grating sensors is how to measure a small Bragg wavelength shift accurately. Nowadays demodulation techniques are mainly based on the edge filter, tunable filter, or interferometric scanning methods. Interferometric demodulation is widely accepted as the technology which can provide the high sensitivity. An interrogation system using the interferometric scanning method is presented, in which an unbalanced fiber M-Z interferometer is used as the wavelength scanner for temperature measurement. A novel fiber Bragg grating sensor system based on M-Z interferometric demodulation technique is presented in this paper. The temperature sensitivity measured in the experiment is almost consistent with that obtained from the theoretic calculation.

  6. Magnetic field sensor based on double-sided polished fibre-Bragg gratings

    International Nuclear Information System (INIS)

    A new magnetic field sensor based on double-sided polished fibre-Bragg gratings (FBGs) coated with an iron thin film for measuring magnetic flux density was experimentally demonstrated with the sensitivity of 25.6 nm T−1. The sensing mechanism is based on the Bragg wavelength shift as the magnetic field is measured by the proposed sensing head. Results of this study present the intensity of the reflected optical signal as a function of the applied strain on the FBG. This paper shows that an improved method for sensing the wavelength shift with changes in external magnetic field is developed by use of the double-sided polished FBGs

  7. Continuously Tunable Erbium-Doped Fiber Ring Laser Using Fiber Bragg Grating

    Directory of Open Access Journals (Sweden)

    S. W. Harun H. Ahmad and P. Poopalan

    2012-08-01

    Full Text Available An efficient tunable erbium-doped fiber (EDF ring laser utilizing a single fiber Bragg grating (FBG and an optical circulator is investigated. The laser demonstrates a threshold of 3.43 mW and a slope efficiency of 12.5%. Tunability of the fiber laser is obtained by thermal tuning of the FBG. Simultaneous temperature tuning demonstrates a 0.01 nm/oC variation in laser wavelength.Key Words:  Fiber Bragg grating, fiber laser, tunable laser, ring laser, thermal tuning

  8. Finite-difference modeling of Bragg fibers with ultrathin cladding layers via adaptive coordinate transformation

    DEFF Research Database (Denmark)

    Shyroki, Dzmitry; Lægsgaard, Jesper; Bang, Ole;

    As an alternative to the finite-element analysis or subgridding, coordinate transformation is used to “stretch” the fine-structured cladding of a Bragg fiber, and then the fullvector, equidistant-grid finite-difference computations of the modal structure are performed.......As an alternative to the finite-element analysis or subgridding, coordinate transformation is used to “stretch” the fine-structured cladding of a Bragg fiber, and then the fullvector, equidistant-grid finite-difference computations of the modal structure are performed....

  9. Bragg concentrators for hard (> 10keV) x-ray astronomy: Status report

    DEFF Research Database (Denmark)

    Pareschi, G.; Frontera, F.; Pasqualini, G.

    1997-01-01

    The use of focusing telescopes in hard X-ray (E > 10 keV) astronomy will provide better flux sensitivity and imaging performances with respect to the direct-viewing detectors, utilized until now. We present recent results obtained from our group regarding the possible use of Bragg-diffraction tec......The use of focusing telescopes in hard X-ray (E > 10 keV) astronomy will provide better flux sensitivity and imaging performances with respect to the direct-viewing detectors, utilized until now. We present recent results obtained from our group regarding the possible use of Bragg...

  10. Direct UV written planar Bragg gratings that feature zero fluence induced birefringence

    Science.gov (United States)

    Holmes, Christopher; Cooper, Peter A.; Fernando, Harendra N. J.; Stroll, Andreas; Gates, James C.; Krishnan, Chirenjeevi; Haynes, Roger; Mennea, Paolo L.; Carpenter, Lewis G.; Gawith, Corin B. E.; Roth, Martin M.; Charlton, Martin D.; Smith, Peter G. R.

    2015-12-01

    Direct UV writing is a planar fabrication process capable of simultaneously defining waveguides and Bragg gratings. The technique is fully computer controlled and uniquely uses a small focused spot ~7 μm in diameter for direct writing exposure. This work investigates its use to achieve phase trimming and Bragg grating definition in silica-on-silicon lithographic waveguides. It is observed that birefringence control using direct UV writing can be made independent of exposure fluence with this technique through tailoring substrate stress. The result is demonstrated experimentally and supported theoretically using finite element analysis.

  11. A flat microwave photonic filter based on M-Z modulatorand fiber Bragg grating

    Institute of Scientific and Technical Information of China (English)

    QI Chun-hui; PEI Li; NING Ti-gang; GUO Lan; WU Shu-qiang; ZHAO Rui-feng; RUAN Yi

    2009-01-01

    A new multiple-taps and flat microwave photonic filter, which is composed of fiber Bragg grating, M-Z modulator and erbium-doped fiber, is put forward. The flat band-pass or flat band-stop response can be realized by adjusting the coupler's factor and the reflectivity of the fiber Bragg grating or the gain of the erbium-doped fiber. The free spectral range of the filter can be tuned by controlling the length of the erbium-doped fiber. The potential and feasibility of the proposed filtering structures have been demonstrated by simulation.

  12. Dose ratio proton radiography using the proximal side of the Bragg peak

    OpenAIRE

    Doolan, P. J.; Royle, G; Gibson, A.; Lu, H-M; Prieels, D.; Bentefour, E. H.

    2015-01-01

    Purpose: In recent years there has been a movement towards single-detector proton radiography, due to its potential ease of implementation within the clinical environment. One such single-detector technique is the dose ratio method, in which the dose maps from two pristine Bragg peaks are recorded beyond the patient. To date, this has only been investigated on the distal side of the lower energy Bragg peak, due to the sharp fall-off. We investigate the limits and applicability of the dose rat...

  13. Detecting antiferromagnetism of atoms in an optical lattice via optical Bragg scattering

    OpenAIRE

    Corcovilos, T. A.; Baur, S. K.; Hitchcock, J. M.; Mueller, E. J.; Hulet, R. G.

    2009-01-01

    Antiferromagnetism of ultracold fermions in an optical lattice can be detected by Bragg diffraction of light, in analogy to the diffraction of neutrons from solid state materials. A finite sublattice magnetization will lead to a Bragg peak from the (1/2 1/2 1/2) crystal plane with an intensity depending on details of the atomic states, the frequency and polarization of the probe beam, the direction and magnitude of the sublattice magnetization, and the finite optical density of the sample. Ac...

  14. Bragg mirror inscription on LiNbO3 waveguides by index microstructuration

    Science.gov (United States)

    Ferriere, Richard; Benkelfat, Badr-Eddine; Dudley, John M.; Ghoumid, Kamal

    2006-05-01

    Numerous applications in integrated optics, especially those related to multiwavelength telecommunications, require dichroic reflectors for use as narrowband or broadband wavelength-selective filters. Bragg mirrors are excellent candidates for this purpose, and we describe a method of fabricating Bragg grating reflectors in Ti-indiffused Lithium Niobate single-mode waveguides based on holographic masking in association with proton exchange. The holographic setup is employed to record a photolithographic mask directly on the substrate, enabling the inscription of waveguides with both periodic and aperiodic distributed parameters.

  15. Monitoring of ultraviolet pulse rate dependent photomechanical actuation in carbon nanotubes using fiber Bragg gratings

    International Nuclear Information System (INIS)

    In this Letter, we present a non-contact method of controlling and monitoring photomechanical actuation in carbon nanotubes (CNT) by exposing it to ultra-violet radiation at different pulse rates (10 to 200 Hz). This is accomplished by imparting a reversible photo induced strain (5–330 με) on CNT coated fibre Bragg gratings; CNT undergoes an internal reversible structural change due to cyclic photon absorption that leads to the development of mechanical strain, which in turn allows reversible switching of the Bragg wavelength. The results also reveal an interesting pulse rate dependent rise and fall times of photomechanical actuation in CNT

  16. High resolution Bragg-Fresnel optics for nanometer scale methods with soft X-rays

    OpenAIRE

    Erko, A.

    1994-01-01

    The main principles and some applications of Bragg-Fresnel multilayer optics are described. An elliptical Bragg-Fresnel multilayer lens (BFML), designed and fabricated in the IMT RAS has been used for 2-dimensional focusing of the white X-ray synchrotron beam. For the beam energy of about 12 KeV the spot size checked with the knife edge method was about 1µm. As an example of a successful application of this optical element in x-ray imaging, the fluorescence X-Ray scanning LURE-IMT microprobe ...

  17. Photonic crystal fiber Bragg grating based sensors: opportunities for applications in healthcare

    Science.gov (United States)

    Berghmans, Francis; Geernaert, Thomas; Sulejmani, Sanne; Thienpont, Hugo; Van Steenberge, Geert; Van Hoe, Bram; Dubruel, Peter; Urbanczyk, Waclaw; Mergo, Pawel; Webb, David J.; Kalli, Kyriacos; Van Roosbroeck, Jan; Sugden, Kate

    2011-12-01

    We review the state-of-the-art in photonic crystal fiber (PCF) and microstructured polymer optical fiber (mPOF) based mechanical sensing. We first introduce how the unique properties of PCF can benefit Bragg grating based temperature insensitive pressure and transverse load sensing. Then we describe how the latest developments in mPOF Bragg grating technology can enhance optical fiber pressure sensing. Finally we explain how the integration of specialty fiber sensor technology with bio-compatible polymer based micro-technology provides great opportunities for fiber sensors in the field of healthcare.

  18. Variable wavefront tuning with a SLM for tailored femtosecond fiber Bragg grating inscription.

    Science.gov (United States)

    Voigtländer, Christian; Krämer, Ria G; Goebel, Thorsten A; Richter, Daniel; Nolte, Stefan

    2016-01-01

    We report on the inscription of fiber Bragg gratings using femtosecond laser pulses and the phase-mask technique. The wavefront of the inscription laser is variably tuned with a spatial light modulator (SLM). By applying Fresnel lenses with different focal lengths, the period of the fiber Bragg gratings could be shifted. A linear change of the grating period for a FBG inscribed with a third-order deformed wavefront and a quadratic-period behavior for a fourth-order wavefront could be verified experimentally for the first time. PMID:26696147

  19. Microwave photonics filtering technique for interrogating a very-weak fiber Bragg grating cascade sensor

    OpenAIRE

    Ricchiuti, Amelia Lavinia; Hervás Peralta, Javier; Barrera Vilar, David; Sales Maicas, Salvador; Capmany Francoy, José

    2014-01-01

    A system to interrogate photonic sensors based on a very weak fiber Bragg grating cascade fiber is presented and experimentally validated and dedicated to detecting the presence and location of a spot event. The distributed sensor proposed consists of a 5-m-long fiber, containing 500 9-mm-long Bragg gratings with a grating separation of 10.21 mm. The principle of operation is based on a technique used to analyze microwave photonics filters. The detection of spot events along the sensor is ...

  20. Dual Measurements of Pressure and Temperature With Fiber Bragg Grating Sensor

    OpenAIRE

    Tahreer S. Mansour; Fahad M. Abdulhussein

    2015-01-01

    The fiber Bragg grating (FBG) technology has been rapidly applied in the sensing technology field. In this work, uniform FBG was used as pressure sensor based on measuring related Bragg wavelength shift. The pressure was applied directly by air compressor to the sensor and the pressure was ranged from 1 to 6 bar. This sensor also was affected by the external temperature so as a result it could be used as a temperature sensor. This sensor could be used to monitor the pressure of dams. It has b...

  1. Continuously Tunable Erbium-Doped Fiber Ring Laser Using Fiber Bragg Grating

    OpenAIRE

    2012-01-01

    An efficient tunable erbium-doped fiber (EDF) ring laser utilizing a single fiber Bragg grating (FBG) and an optical circulator is investigated. The laser demonstrates a threshold of 3.43 mW and a slope efficiency of 12.5%. Tunability of the fiber laser is obtained by thermal tuning of the FBG. Simultaneous temperature tuning demonstrates a 0.01 nm/oC variation in laser wavelength.Key Words:  Fiber Bragg grating, fiber laser, tunable laser, ring laser, thermal tuning

  2. Structural and nitrogen gas adsorption-desorption studies of bragg grating waveguide fabricated on porous silicon nanostructure

    International Nuclear Information System (INIS)

    Fabrication and structural analysis of Bragg grating waveguide on porous silicon were presented in this work. The Bragg grating structure was directly etched on porous silicon. Multilayer structure of porous silicon with alternating values of thickness and refractive index were determined. Nitrogen gas adsorption-desorption is a non-destructive method to determine the fabricated Bragg grating's interaction with gases. It is known that porous silicon is a high potential in-situ gas sensor due to the strong tube capillary effect and enormous surface area for molecular binding and detection. Thus, specific surface area and porosity of fabricated Bragg grating are also in the scope of this study. Good agreement of pore size distribution and multilayer thickness/refractive index achieved from adsorption-desorption technique and ellipsometer measurement respectively when comparing with estimations from field emission scanning electron microscopy. This Bragg grating waveguide has a big potential as gas sensor in many areas such as aerospace and in industries particularly.

  3. Dynamic fiber Bragg gratings based health monitoring system of composite aerospace structures

    Science.gov (United States)

    Panopoulou, A.; Loutas, T.; Roulias, D.; Fransen, S.; Kostopoulos, V.

    2011-09-01

    The main purpose of the current work is to develop a new system for structural health monitoring of composite aerospace structures based on real-time dynamic measurements, in order to identify the structural state condition. Long-gauge Fibre Bragg Grating (FBG) optical sensors were used for monitoring the dynamic response of the composite structure. The algorithm that was developed for structural damage detection utilizes the collected dynamic response data, analyzes them in various ways and through an artificial neural network identifies the damage state and its location. Damage was simulated by slightly varying locally the mass of the structure (by adding a known mass) at different zones of the structure. Lumped masses in different locations upon the structure alter the eigen-frequencies in a way similar to actual damage. The structural dynamic behaviour has been numerically simulated and experimentally verified by means of modal testing on two different composite aerospace structures. Advanced digital signal processing techniques, e.g. the wavelet transform (WT), were used for the analysis of the dynamic response for feature extraction. WT's capability of separating the different frequency components in the time domain without loosing frequency information makes it a versatile tool for demanding signal processing applications. The use of WT is also suggested by the no-stationary nature of dynamic response signals and the opportunity of evaluating the temporal evolution of their frequency contents. Feature extraction is the first step of the procedure. The extracted features are effective indices of damage size and location. The classification step comprises of a feed-forward back propagation network, whose output determines the simulated damage location. Finally, dedicated training and validation activities were carried out by means of numerical simulations and experimental procedures. Experimental validation was performed initially on a flat stiffened panel

  4. Dynamic Landslide Deformation Monitoring with Fiber Bragg Grating Sensors

    Science.gov (United States)

    Moore, J. R.; Gischig, V.; Button, E.; Loew, S.

    2009-12-01

    Fiber optic (FO) strain sensors are a promising new technology for in-situ landslide monitoring. General performance advantages include high resolution, fast sampling rate, and insensitivity to electrical disturbances. Here we describe a new FO monitoring system based on long-gage fiber Bragg grating sensors installed at the Randa Rockslide Laboratory in southern Switzerland. We highlight the advantages and disadvantages of the system, describe relevant first results, and compare FO data to that from traditional instruments already installed on site. The Randa rock slope has been the subject of intensive research since its failure in 1991. Around 5 million cubic meters of rock remains unstable today, moving at rates up to 20 mm / year. Traditional in-situ monitoring techniques have been employed to understand the mechanics and driving forces of the currently unstable rock mass, however these investigations are limited by the resolution and low sampling rate of the sensors. The new FO monitoring system has micro-strain resolution and offers the capability to detect sub-micrometer scale deformations in both triggered-dynamic and continuous measurements. Two types of sensors have been installed: fully-embedded borehole sensors encased in grout at depths of 38, 40, and 68 m, and surface extensometers spanning active tension cracks. Dynamic measurements are triggered by sensor deformation and recorded at 100 Hz, while continuous measurements are logged every 5 minutes. Since installation in August 2008, the FO monitoring system has been operational 90% of the time. Time series deformation data show movement rates consistent with previous borehole extensometer surveys. Accelerated displacements following installation are likely related to long-term curing and dewatering of the grout. A number of interesting transients have been recorded, which in some cases were large enough to trigger rapid sampling. The combination of short- and long-term observation offers new

  5. Miniature and low cost fiber bragg grating interrogator for structural monitoring in nano-satellites

    NARCIS (Netherlands)

    Toet, P.M.; Hagen, R.A.J.; Hakkesteegt, H.C.; Lugtenburg, J.; Maniscalco, M.P.

    2014-01-01

    In this paper we present a newly developed Fiber Optic measurement system, consisting of Fiber Bragg Grating (FBG) sensors and an FBG interrogator. The development of the measuring system is part of the PiezoElectric Assisted Smart Satellite Structure (PEASSS) project, which was initiated at the beg

  6. Fiber Bragg Grating Sensor for Fault Detection in Radial and Network Transmission Lines

    Directory of Open Access Journals (Sweden)

    Mehdi Shadaram

    2010-10-01

    Full Text Available In this paper, a fiber optic based sensor capable of fault detection in both radial and network overhead transmission power line systems is investigated. Bragg wavelength shift is used to measure the fault current and detect fault in power systems. Magnetic fields generated by currents in the overhead transmission lines cause a strain in magnetostrictive material which is then detected by Fiber Bragg Grating (FBG. The Fiber Bragg interrogator senses the reflected FBG signals, and the Bragg wavelength shift is calculated and the signals are processed. A broadband light source in the control room scans the shift in the reflected signal. Any surge in the magnetic field relates to an increased fault current at a certain location. Also, fault location can be precisely defined with an artificial neural network (ANN algorithm. This algorithm can be easily coordinated with other protective devices. It is shown that the faults in the overhead transmission line cause a detectable wavelength shift on the reflected signal of FBG and can be used to detect and classify different kind of faults. The proposed method has been extensively tested by simulation and results confirm that the proposed scheme is able to detect different kinds of fault in both radial and network system.

  7. Preparation and characterization of bragg fibers for delivery of laser radiation at 1064 nm

    Czech Academy of Sciences Publication Activity Database

    Matějec, Vlastimil; Kašík, Ivan; Podrazký, Ondřej; Aubrecht, Jan; Frank, M.; Jelínek, M.; Kubeček, V.

    2013-01-01

    Roč. 22, č. 1 (2013), s. 346-351. ISSN 1210-2512 R&D Projects: GA ČR GAP102/12/2361 Institutional support: RVO:67985882 Keywords : Bragg fibers * High-index contrast * MCVD method Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering Impact factor: 0.796, year: 2013

  8. Angle dependent Fiber Bragg grating inscription in microstructured polymer optical fibers

    DEFF Research Database (Denmark)

    Bundalo, Ivan-Lazar; Nielsen, Kristian; Bang, Ole

    2015-01-01

    We report on an incidence angle influence on inscription of the Fiber Bragg Gratings in Polymethyl methacrylate (PMMA) microstructured polymer optical fibers. We have shown experimentally that there is a strong preference of certain angles, labeled Gamma K, over the other ones. Angles close to...... Marshall et al. (C)2015 Optical Society of America...

  9. Novel Tunable PMD Compensation Technology Using Linear Chirped Fiber Bragg Grating

    Institute of Scientific and Technical Information of China (English)

    LIU Yu-min; YU Zhong-yuan; YANG Hong-bo; ZHANG Xiao-guang; YANG Bo-jun

    2004-01-01

    Based on uniform fiber Bragg grating bonded with a magnetostrictive rod in the non-uniform magnetic field, a novel PMD compensation technique is proposed. This all- fiber PMD compensation technology is cost-effective and flexible in designing the differential group delay profile.

  10. Bragg Gratings in Crystalline Waveguides Fabricated by Focused Ion Beam Milling

    NARCIS (Netherlands)

    Inurrategi, I.; Ay, F.; Geskus, D.; Aravazhi, S.; Gadgil, V.J.; Wörhoff, K.; Pollnau, M.

    2010-01-01

    Results of an optimization study of deeply-etched Bragg gratings in KY(WO4)2:Yb3+ to obtain photonic cavity structures are reported. By optimizing parameters such as dose per area, dwell time and pixel resolution the redeposition effects are minimized and 4.3um-deep gratings are achieved.

  11. Perturbative modeling of Bragg-grating-based biosensors in photonic-crystal fibers

    DEFF Research Database (Denmark)

    Burani, Nicola; Lægsgaard, Jesper

    2005-01-01

    We present a modeling study carried out to support the design of a novel, to our knowledge, kind of photonic-crystal fiber (PCF)-based sensor. This device, based on a PCF Bragg grating, detects the presence of selected single-stranded DNA molecules, hybridized to a biofilm in the air holes of the...

  12. High-quality-factor Bragg onion resonators with omnidirectional reflector cladding

    OpenAIRE

    Xu, Yong; Liang, Wei; Yariv, Amnon; Fleming, J.G.; Lin, Shawn-Yu

    2003-01-01

    We propose to approximate a spherically symmetric Bragg resonator in an onionlike geometry. We develop a transfer-matrix theory for calculation of the quality factors and analyze the effect of the onion stem on cavity Q factors. We find that it is possible to achieve significant inhibition of spontaneous emission in an onion resonator with omnidirectional cladding layers.

  13. Doppler shift neutron spin echo at Bragg reflection of magnetite particle in ferrofluid

    International Nuclear Information System (INIS)

    Velocities of magnetite particle crystals in heavy water-based ferrofluid have been studied by neutron spin echo PONTA in JRR-3M at the Bragg positions. Moving and rotating magnetite particle crystals in ferrofluid bring Doppler shift of neutron velocity at Bragg reflection though the scattering is elastic. This change of velocity is firstly measured by neutron spin echo (NSE) spectrometer as the function of Larmor precessions. Since the structure factor of (3 1 1) Bragg reflection is mainly nuclear scattering, the decay of NSE signal is interpreted as Doppler velocity shift due to Brownian motion of magnetite crystals, such as translational and rotational motions. The spin echo signals of (3 1 1) Bragg reflection show rather simple decay up to the number of Larmor precession, 967 turns. The estimated velocity distribution is 1.5±0.2 and 1.2±0.1 m/s at 295 and 317 K, respectively. While the spin echo signals of magnetic (1 1 1) reflection show spin flip scattering. The experiment of small angle scattering on the ferrofluid with wt% of magnetite from 1.3% to 40.5% concludes that the particle radius is 4.2±0.2 nm, the cluster radius is 17.8±0.2 nm and the neighboring average distance is around 11.3 ±1.1 nm at 298 K

  14. Doubly curved imaging Bragg crystal spectrometer for X-ray astronomy

    DEFF Research Database (Denmark)

    Byrnak, B. P.; Christensen, Finn Erland; Westergaard, Niels Jørgen Stenfeldt;

    1985-01-01

    An X-ray spectrometer which is sensitive in the 0.5-7-keV energy range and is intended for use onboard astronomical satellites has been studied. The Bragg reflected rays from a doubly bent crystal positioned downstream of the focal plane of a grazing-incidence concentrator are focused along the a...

  15. FIBER BRAGG GRATING BASED FIBER-OPTIC TEMPERATURE MEASUREMENT SYSTEM FOR THE HIGH VOLTAGE CABLE

    OpenAIRE

    TANG, Aihong; Zhao, Yangyang; Jiang, Desheng

    2010-01-01

    The Fiber Bragg Grating (FBG) sensor is used to detect the temperature of the high voltage cable.The temperature measurement system is constructed and the functions of each part of the system isstated in detail. This temperature measurement systems presented in this paper is usefull for theoperation of the power cable.

  16. A novel tunable polarization mode dispersion compensator with strain chirped fiber Bragg gratings

    Institute of Scientific and Technical Information of China (English)

    Yumin Liu(刘玉敏); Zhongyuan Yu(俞重远); Yuan Zheng(郑远); Xiaoguang Zhang(张晓光); Bojun Yang(杨伯君)

    2004-01-01

    A tunable polarization mode dispersion (PMD) compensator based on strain-chirped fiber Bragg gratings (FBGs) is proposed. It natures in flexible designing, large tuning range, without using linear or nonlinear chirped phase mask, fast tuning response time, continuously adjustable, all-fiber based, compact, and cheap.

  17. Polymer PCF Bragg grating sensors based on poly(methyl methacrylate) and TOPAS cyclic olefin copolymer

    DEFF Research Database (Denmark)

    Johnson, Ian P; Webb, David J; Kalli, Kyriacos;

    2011-01-01

    mode PCF with a core diameter of 6μm based on TOPAS cyclic olefin copolymer. Bragg grating inscription was achieved using a 30mW continuous wave 325nm helium cadmium laser. Both TOPAS and PMMA fibre have a large attenuation of around 1dB/cm in the 1550nm spectral region, limiting fibre lengths to no...

  18. 3D flexible needle steering in soft-tissue phantoms using fiber bragg grating sensors

    NARCIS (Netherlands)

    Abayazid, Momen; Kemp, Marco; Misra, Sarthak

    2013-01-01

    Needle insertion procedures are commonly used for surgical interventions. In this paper, we develop a three-dimensional (3D) closed-loop control algorithm to robotically steer flexible needles with an asymmetric tip towards a target in a soft-tissue phantom. Twelve Fiber Bragg Grating (FBG) sensors

  19. Plasmid DNA damage by heavy ions at spread-out Bragg peak energies

    NARCIS (Netherlands)

    Dang, H. M.; van Goethem, M. J.; van der Graaf, E. R.; Brandenburg, S.; Hoekstra, R.; Schlatholter, T.

    2010-01-01

    Interaction of ionizing radiation with plasmid DNA can lead to formation of single strand breaks, double strand breaks and clustered lesions. We have investigated the response of the synthetic plasmid pBR322 in aqueous solution upon irradiation with (12)C ions under spread-out Bragg peak conditions

  20. Structural Evolution of Colloidal Crystal Films in the Process of Melting Revealed by Bragg Peak Analysis

    NARCIS (Netherlands)

    Sulyanova, Elena A.; Shabalin, Anatoly; Zozulya, Alexey V.; Meijer, Janne-Mieke; Dzhigaev, Dmitry; Gorobtsov, Oleg; Kurta, Ruslan P.; Lazarev, Sergey; Lorenz, Ulf; Singer, Andrej; Yefanov, Oleksandr; Zaluzhnyy, Ivan; Besedin, Ilya; Sprung, Michael; Petukhov, A. V.; Vartanyants, Ivan A.

    2015-01-01

    In situ X-ray diffraction studies of structural evolution of colloidal crystal films formed by polystyrene spherical particles upon incremental heating are reported. The Bragg peak parameters, such as peak position, integrated intensity, and radial and azimuthal widths were analyzed as a function of

  1. Silica Bridge Impact on Hollow-core Bragg Fiber Transmission Properties

    DEFF Research Database (Denmark)

    Poli, F.; Foroni, M.; Giovanelli, D.;

    2007-01-01

    The silica bridges impact on the hollow-core Bragg fiber guiding properties is investigated. Results demonstrate that silica nanosupports are responsible for the surface mode presence, which causes the peaks experimentally measured in the transmission spectrum. © 2006 Optical Society of America....

  2. Intensity Modulation of Hybrid Soliton Pulsed Source with Fibre Bragg Grating External Cavity

    Institute of Scientific and Technical Information of China (English)

    Nuran Dogru; M.Sadettin Ozyazici

    2004-01-01

    Resonance peak spectral splitting (RPSS) in the intensity modulation of a hybrid soliton pulsed source, where fibre Bragg gratings are used as an external cavity, can be suppressed by introducing a suitable linear chirp rate in a Gaussian apodized grating. Antireflection-coated reflectivity and gain suppression factor does not strongly affect the RPSS.

  3. Two-Dimensional Cavity Resonant Modes of Si Based Bragg Reflection Ridge Waveguide

    Institute of Scientific and Technical Information of China (English)

    CHEN San; Lu Hong-Yan; CHEN Kun-Ji; XU Jun; MA Zhong-Yuan; LI Wei; HUANG Xin-Fan

    2011-01-01

    @@ Si-based ridge-waveguides with Bragg reflectors are fabricated based on our method.Three resonant peaks could be obviously identified from the photoluminescence spectra, and field patterns of these resonant peaks, simulated by the finite difference time domain (FDTD) method, confirm that these peaks originate from cavity resonances.The resonant wavelengths and spatial angular distribution are given by the resonant models, which agree well with the experimental data.Experimentally, a simple method is proposed to testify the experimental and theoretical results.Such devices based on Bragg reflectors may have potential applications in light-emitting diodes, lasers and integrated photonic circuits.%Si-based ridge-waveguides with Bragg reflectors are fabricated based on our method. Three resonant peaks could be obviously identified from the photoluminescence spectra, and field patterns of these resonant peaks, simulated by the finite difference time domain (FDTD) method, confirm that these peaks originate from cavity resonances. The resonant wavelengths and spatial angular distribution are given by the resonant models, which agree well with the experimental data. Experimentally, a simple method is proposed to testify the experimental and theoretical results. Such devices based on Bragg reflectors may have potential applications in light-emitting diodes, lasers and integrated photonic circuits.

  4. Integrated optics Bragg filters made by ion exchange and wafer bonding

    Science.gov (United States)

    Gardillou, F.; Bastard, L.; Broquin, J.-E.

    2006-09-01

    A polarization-insensitive Bragg filter has been realized on a glass substrate thanks to the epoxy-free wafer bonding technique. This device is based on the combined embedding of a corrugated grating and a surface ion-exchanged waveguide, both realized on a silicate glass. With this configuration, the grating patterns are also protected from external degradation of the environment.

  5. Calibration and modelling of the SODART-OXS Bragg spectrometer onboard the SRG satellite

    DEFF Research Database (Denmark)

    Halm, Ingolf; Wiebicke, Hans-Joachim; Christensen, Finn Erland;

    1998-01-01

    The SODART X-ray telescope includes an Objective Crystal Spectrometer (OXS) providing a high energy resolving power by Bragg reflection upon crystals. To cover a wide energy range, 3 types of natural crystals (LiF, Si, RAP) and a Co/C multilayer structure upon Si are used in the ranges 5-11 keV, ...

  6. Comparison of characteristics of Bragg fibers with silica and air cores

    Czech Academy of Sciences Publication Activity Database

    Matějec, Vlastimil; Podrazký, Ondřej; Kašík, Ivan; Frank, M.; Jelínek, M.; Kubeček, V.

    Bellingham: SPIE, 2015, 94500Y. ISBN 9781628415667. ISSN 0277-786X. [8th International Conference on Photonics, Devices, and System VI. Praha (CZ), 27.08.2014-29.08.2014] R&D Projects: GA ČR GAP102/12/2361 Institutional support: RVO:67985882 Keywords : Bragg fiber * Laser diode 1550 nm * MCVD method Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering

  7. A compact low dispersion fiber Bragg grating with high detuning tolerance for advanced modulation formats

    DEFF Research Database (Denmark)

    Deyerl, Hans-Jürgen; Peucheret, Christophe; Zsigri, Beata; Floreani, F.; Plougmann, Nikolai; Hewlett, S. J.; Kristensen, Martin; Jeppesen, Palle

    2005-01-01

    A compact low dispersion fibre Bragg grating is designed and fabricated with the recently developed polarisation control method. Its detuning tolerance is investigated for five different modulation formats at 10 Gbit/s showing a bandwidth utilisation above 89%. Good performance is predicted at 40...... Gbit/s for this device....

  8. Modelling and Simulation of Temperature Sensitivity of Bragg Grating Sensor for Structural Health Monitoring Application

    Directory of Open Access Journals (Sweden)

    Bilkish Mondal

    2014-03-01

    Full Text Available Here in this paper we presented the modelling of Fiber Bragg Grating (FBG as temperature sensor for structural health monitoring application is geometrically designed in the wavelength window of 1.568-1.580μm. Simulation has been done by using optical software R-Soft (GratingMOD.

  9. Bragg Grating Based Sensors in Microstructured Polymer Optical Fibers: Accelerometers and Microphones

    DEFF Research Database (Denmark)

    Stefani, Alessio

    gluing of polymer to silica fibers are discussed. The realization of gratings in polymer fibers is shown with two different techniques: the UV phase mask technique and the direct writing technique reported here for the first time for polymer fibers. Realization of gratings in PMMA step index fibers and...... realization of an optical microphone based on polymer ber Bragg gratings is reported....

  10. High-sensitivity Cryogenic Temperature Sensors using Pressurized Fiber Bragg Gratings

    Science.gov (United States)

    Wu, Meng-Chou; DeHaven, Stanton L.

    2006-01-01

    Cryogenic temperature sensing was studied using a pressurized fiber Bragg grating (PFBG). The PFBG was obtained by simply applying a small diametric load to a regular fiber Bragg grating (FBG), which was coated with polyimide of a thickness of 11 micrometers. The Bragg wavelength of the PFBG was measured at temperatures from 295 to 4.2 K. A pressure-induced transition occurred at 200 K during the cooling cycle. As a result the temperature sensitivity of the PFBG was found to be nonlinear but reach 24 pm/K below 200 K, more than three times the regular FBG. For the temperature change from 80 K to 10 K, the PFBG has a total Bragg wavelength shift of about 470 pm, 10 times more than the regular FBG. From room temperature to liquid helium temperature the PFBG gives a total wavelength shift of 3.78 nm, compared to the FBG of 1.51 nm. The effect of the coating thickness on the temperature sensitivity of the gratings is also discussed.

  11. Anomalous behavior of neutron refraction index in a perfect crystal near the Bragg reflex

    International Nuclear Information System (INIS)

    Anomalous behavior of neutron refraction index in a perfect crystal near Bragg resonance was studied. This phenomenon is connected with the resonance behavior of potential of neutron interaction with crystal near the Bragg reflex. The amplitude of this resonance is equal to magnitude of g-harmonic of neutron interaction potential Vg and width is about the Bragg width of reflex. Recently, it was shown that for the case of noncentrosymmetric crystal this effect result in a large electric field acting on a neutron (value of the field can reach about 108V/cm) . This effect is planed using to search for the electric dipole moment of a neutron. If the degree of crystal imperfect is less than the Bragg reflection width (case of perfect crystal) the width of the reflex is determined by the own width of crystal reflex that is about 10−5 of the neutron energy. The value of g-harmonics of interaction of neutron with crystal Vg and optical potential of the interaction of neutron with crystal V0 are usually about the same. Therefore the variation of neutron energy on a 10−5 of its value will change significantly a potential of neutron interaction with crystal

  12. Design and UV writing of advanced Bragg gratings in optical fibers

    DEFF Research Database (Denmark)

    Plougmann, Nikolai

    2004-01-01

    The refractive index of germano-silica glasses changes during exposure to ultraviolet light. Illuminating an optical fiber with a UV laser, it is possible to induce a periodic change in the effective refractive index of the fiber (Bragg grating). Two main contributions of the Ph.D. project...

  13. William and Lawrence Bragg father and son the most extraordinary collaboration in science

    CERN Document Server

    Jenkin, John

    2008-01-01

    This joint biography is of William and Lawrence Bragg, who changed all of science in the 20th-century with the development of X-ray crystallography, and by mentoring the mid-century discovery of the structure of DNA. Their stories are vivid examples of science teaching and research in a colonial setting (Australia).

  14. Preparation and Characterization of Bragg Fibers for Delivery of Laser Radiation at 1064 nm

    Directory of Open Access Journals (Sweden)

    V. Matejec

    2013-04-01

    Full Text Available Bragg fibers offer new performance for transmission of high laser energies over long distances. In this paper theoretical modeling, preparation and characterization of Bragg fibers for delivery laser radiation at 1064 nm are presented. Investigated Bragg fibers consist of the fiber core with a refractive index equal to that of silica which is surrounded by three pairs of circular layers. Each pair is composed of one layer with a high and one layer with a low refractive index and characterized by a refractive-index difference around 0.03. Propagation constants and radiation losses of the fundamental mode in such a structure were calculated on the basis of waveguide optics. Preforms of the Bragg fibers were prepared by the MCVD method using germanium dioxide, phosphorous pentoxide and fluorine as silica dopants. The fibers with a diameter of 170 m were drawn from the preforms. Refractive-index profiles, angular distributions of the output power and optical losses of the prepared fibers were measured. Results of testing the fibers for delivery radiation of a pulse Nd:YAG laser at 1064 nm are also shown.

  15. A Novel Fiber Bragg Grating with Triangular Spectrum and Its Application in Strain Sensor

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    A novel fiber Bragg grating with triangular spectrum is presented. A strain sensor based on this fiber grating is proposed. Experiments showed that the sensor has advantages of high sensitivity, wider measuring range and immunity to fluctuation of the light source power.

  16. Tunable mode-locked semiconductor laser with Bragg mirror external cavity

    DEFF Research Database (Denmark)

    Yvind, Kresten; Jørgensen, T.; Birkedal, Dan;

    2002-01-01

    We present a simplified design for a wavelength tunable external cavity mode-locked laser by employing a wedged GaAs/AlGaAs Bragg mirror. The device emits 4-6 ps pulses at 10 GHz and is tunable over 15 nm. Although, in the present configuration, tunability is limited to 15 nm, however, we have sh...

  17. Neutron beam instruments at the Bragg Institute, phase 2

    International Nuclear Information System (INIS)

    Full text: On 12 May 2009, the Minister for Innovation, Industry, Science and Research announced funding for the NBI2 Program as part of the Super Science - Future Industry initiative. The budget for the NBI2 Program is $37 million and it is scheduled to be completed within four years (1 July 2009 - 30 June 2013). The project builds on the previous successful Neutron Beam Instruments Project (2000-2007), which funded the original suite of 8 instruments, along with 2 subsequent instruments funded in other ways. NBI2 will feature a new split cold neutron guide (CG-2) with two end positions, three new instruments (a second small-angle neutron scattering machine, a high-resolution back-scattering spectrometer and a neutron radiography/tomography/imaging station) along with a substantial suite of sample-environment apparatus. On 27-28 August 2009, the Bragg Institute organised a NBI2 scoping workshop in which the key parameters of the new neutron instruments, guides and sample environments were defined [1]. The case for a second SANS machine rests on the overwhelming interest and demand from the domestic community in soft matter, structural biology, materials science, magnetism and superconductivity. A second SANS instrument will have many similarities with QUOKKA but it will be geared towards excelling in measuring a wider range of object sizes simultaneously, i.e. within a single experimental setting, enabled by a time-of-flight operation mode. This is very important for kinetic measurements, which is an emerging technique and essential in various science areas. Another key design feature will be the development of sophisticated sample environment techniques such as high magnetic fields and polarisation analysis along with the appropriate data analysis methods. The back-scattering spectrometer will open up spectroscopic studies at lower energies (longer times) than on the Pelican time-of-flight spectrometer, doubling the dynamic range in energy that can be accessed at

  18. Dosimetric response of radiochromic films to protons of low energies in the Bragg peak region

    Science.gov (United States)

    Battaglia, M. C.; Schardt, D.; Espino, J. M.; Gallardo, M. I.; Cortés-Giraldo, M. A.; Quesada, J. M.; Lallena, A. M.; Miras, H.; Guirado, D.

    2016-06-01

    One of the major advantages of proton or ion beams, applied in cancer treatment, is their excellent depth-dose profile exhibiting a low dose in the entrance channel and a distinct dose maximum (Bragg peak) near the end of range in tissue. In the region of the Bragg peak, where the protons or ions are almost stopped, experimental studies with low-energy particle beams and thin biological samples may contribute valuable information on the biological effectiveness in the stopping region. Such experiments, however, require beam optimization and special dosimetry techniques for determining the absolute dose and dose homogeneity for very thin biological samples. At the National Centre of Accelerators in Seville, one of the beam lines at the 3 MV Tandem Accelerator was equipped with a scattering device, a special parallel-plate ionization chamber with very thin electrode foils and target holders for cell cultures. In this work, we present the calibration in absolute dose of EBT3 films [Gafchromic radiotherapy films, http://www.ashland.com/products/gafchromic-radiotherapy-films] for proton energies in the region of the Bragg peak, where the linear energy transfer increases and becomes more significant for radiobiology studies, as well as the response of the EBT3 films for different proton energy values. To irradiate the films in the Bragg peak region, the energy of the beam was degraded passively, by interposing Mylar foils of variable thickness to place the Bragg peak inside the active layer of the film. The results obtained for the beam degraded in Mylar foils are compared with the dose calculated by means of the measurement of the beam fluence with an ionization chamber and the energy loss predicted by srim2008 code.

  19. In situ health monitoring of bonded composite repairs using a novel fiber Bragg grating sensing arrangement

    Science.gov (United States)

    Davis, Claire; Baker, Wayne; Moss, Scott D.; Galea, Stephen C.; Jones, Rhys

    2002-11-01

    As the replacement costs of military aircraft escalate, there is an increasing trend to operate existing aircraft well beyond their original design life. As the fleet ages, structural problems such as airframe corrosion and cracking are becoming significant issues. In recent years, bonded composite patches or doublers have been developed to repair or reinforce defective regions of the airframe. However certification concerns have limited most application of these bonded composite repairs to secondary structures. In order to alleviate certification concerns, and thus facilitate the implementation of this repair technology to critical damage in primary structure, the 'smart patch' approach has been proposed. This approach involves incorporating sensors into the composite patch to self-monitor patch health. This paper describes the use of optical fibre Bragg gratings to measure the changes in thermal residual strain that occur when a composite patch starts to disbond from the parent structure. Conventionally, the Bragg sensing mechanism relies on a shift in reflected wavelength, which requires the use of costly optical measurement tools. A modified sensing arrangement is proposed, which incorporates two Bragg gratings, and a fibre optic coupler. The reflection from the first Bragg grating acts as a reference source for an active Bragg grating on the patch. This modified arrangement allows a relative wavelength shift to be translated into a change in the optical power, which can be measured easily using a low cost interrogation system. The modified sensing arrangement also allows us to more readily miniaturise the opto-electrical interrogation system, thus enabling these systems to be more easily implemented on operational aircraft.

  20. Multi-Stress Monitoring System with Fiber-Optic Mandrels and Fiber Bragg Grating Sensors in a Sagnac Loop

    OpenAIRE

    Hyunjin Kim; Umesh Sampath; Minho Song

    2015-01-01

    Fiber Bragg grating sensors are placed in a fiber-optic Sagnac loop to combine the grating temperature sensors and the fiber-optic mandrel acoustic emission sensors in single optical circuit. A wavelength-scanning fiber-optic laser is used as a common light source for both sensors. A fiber-optic attenuator is placed at a specific position in the Sagnac loop in order to separate buried Bragg wavelengths from the Sagnac interferometer output. The Bragg wavelength shifts are measured with scanni...

  1. Wide angle and narrow-band asymmetric absorption in visible and near-infrared regime through lossy Bragg stacks

    Science.gov (United States)

    Shu, Shiwei; Zhan, Yawen; Lee, Chris; Lu, Jian; Li, Yang Yang

    2016-06-01

    Absorber is an important component in various optical devices. Here we report a novel type of asymmetric absorber in the visible and near-infrared spectrum which is based on lossy Bragg stacks. The lossy Bragg stacks can achieve near-perfect absorption at one side and high reflection at the other within the narrow bands (several nm) of resonance wavelengths, whereas display almost identical absorption/reflection responses for the rest of the spectrum. Meanwhile, this interesting wavelength-selective asymmetric absorption behavior persists for wide angles, does not depend on polarization, and can be ascribed to the lossy characteristics of the Bragg stacks. Moreover, interesting Fano resonance with easily tailorable peak profiles can be realized using the lossy Bragg stacks.

  2. Fabrication of the Long Bragg Grating by Excimer Laser Micro Machining with High-Precision Positioning XXY Platform

    Directory of Open Access Journals (Sweden)

    Jian-Zhong Wu

    2014-03-01

    Full Text Available With the advancement of technology, the application of fiber Bragg grating is widely used as a Bragg grating sensor. Fiber Bragg grating is fabrication using excimer laser machining with the phase masker. The grating length is decided by the width of laser beam. In this paper, we proposed fabrication of the long Bragg grating by excimer Laser micro machining with a high-precision positioning XXY platform. The high-precision positioning XXY platform plays an important role for long FBG. It needs seriously to combine three short FBGs. Therefore, we can obtain a long FBG with 15mm length. This method can provide a solution to fabricate long FBG by using cheap laser with high-precision positioning XXY platform.

  3. Experimental and numerical investigations of oscillations in extracted material parameters for finite Bragg stacks using the NRW method

    DEFF Research Database (Denmark)

    Clausen, Niels Christian Jerichau; Arslanagic, Samel; Breinbjerg, Olav

    A 1D dielectric finite Bragg stack situated in a rectangular waveguide and illuminated by the fundamental TE10 mode is examined analytically, numerically, and experimentally. Calculated as well as measured scattering parameters are used to extract the effective/equivalent material parameters for...... three specific configurations of its constituent unit cell. Particular attention is devoted to the absence/presence of certain oscillations in the extracted material parameters, depending on the unit cell configuration. The results for the finite Bragg stack are further verified to agree with those of...... an infinite Bragg stack, for which the dispersion equation is used in conjunction with the Floquet-Bloch harmonics expansion to extract the material parameters. It is shown that the extracted material parameters for the finite and infinite Bragg stacks agree for the symmetric unit cell configuration....

  4. Dual wavelength erbium-doped fiber laser with a lateral pressure-tuned Hi-Bi fiber Bragg grating

    Institute of Scientific and Technical Information of China (English)

    Lingyun Xiong(熊凌云); Guiyun Kai(开桂云); Lei Sun(孙磊); Xinhuan Feng(冯新焕); Chunxian Xiao(肖纯贤); Yange Liu(刘艳格); Shuzhong Yuan(袁树忠); Xiaoyi Dong(董孝义)

    2004-01-01

    Tunable dual wavelength erbium-doped fiber laser (EDFL) with stable oscillation at room temperature is proposed and demonstrated. This laser utilizes a Bragg grating fabricated in a high birefringence fiber as the wavelength-selective component, and then achieves the stable dual wavelength oscillation by introducing the polarization hole burning effect. Furthermore, by applying lateral strain upon the fiber Bragg grating (FBG), the space of the laser dual wavelengths can be tuned continuously.

  5. Fate of the Peak Effect in a Type-II Superconductor: Multicriticality in the Bragg-Glass Transition

    OpenAIRE

    Park, S R; S.M. CHOI; Dender, D. C.; Lynn, J. W.; Ling, X. S.

    2003-01-01

    We have used small-angle-neutron-scattering (SANS) and ac magnetic susceptibility to investigate the global magnetic field H vs temperature T phase diagram of a single crystal Nb in which a first-order transition of Bragg-glass melting (disordering), a peak effect, and surface superconductivity are all observable. It was found that the disappearance of the peak effect is directly related to a multicritical behavior in the Bragg-glass transition. Four characteristic phase boundary lines have b...

  6. Momentum distribution dynamics of a Tonks-Girardeau gas: Bragg reflections of a quantum many-body wavepacket

    OpenAIRE

    Pezer, R.; Buljan, H.

    2006-01-01

    The dynamics of the momentum distribution and the reduced single-particle density matrix (RSPDM) of a Tonks-Girardeau (TG) gas is studied in the context of Bragg-reflections of a many-body wavepacket. We find strong suppression of a Bragg-reflection peak for a dense TG wavepacket; our observation illustrates dependence of the momentum distribution on the interactions/wavefunction symmetry. The momentum distribution is calculated with a fast algorithm based on a formula expressing the RSPDM vi...

  7. Highly tunable Terahertz filter with magneto-optical Bragg grating formed in semiconductor-insulator-semiconductor waveguides

    OpenAIRE

    Kangwen Li; Xunpeng Ma; Zuyin Zhang; Lina Wang; Haifeng Hu; Yun Xu; Guofeng Song

    2013-01-01

    A highly tunable terahertz (THz) filter with magneto-optical Bragg grating formed in semiconductor-insulator-semiconductor waveguides is proposed and demonstrated numerically by means of the Finite Element Method. The results reveal that a sharp peak with high Q-value presents in the band gap of Bragg grating waveguide with a defect, and the position of the sharp peak can be modified greatly by changing the intensity of the transverse magnetic field applied to the device. Compared to the situ...

  8. Wide angle and narrow-band asymmetric absorption in visible and near-infrared regime through lossy Bragg stacks

    OpenAIRE

    Shiwei Shu; Yawen Zhan; Chris Lee; Jian Lu; Yang Yang Li

    2016-01-01

    Absorber is an important component in various optical devices. Here we report a novel type of asymmetric absorber in the visible and near-infrared spectrum which is based on lossy Bragg stacks. The lossy Bragg stacks can achieve near-perfect absorption at one side and high reflection at the other within the narrow bands (several nm) of resonance wavelengths, whereas display almost identical absorption/reflection responses for the rest of the spectrum. Meanwhile, this interesting wavelength-se...

  9. Investigation of code reconfigurable fibre Bragg gratings for Optical Code Division Multiple Access (OCDMA) and Optical Packet Switching (OPS) Networks

    OpenAIRE

    Tian, Chun

    2009-01-01

    This thesis documents my work in the telecommunication system laboratory at the Optoelectronics Research Centre, towards the implementation of code reconfigurable OCDMA and all-optical packet switching nodes based on fibre Bragg grating (FBG) technology. My research work involves characterizing the performance of various gratings, specifically high reflectivity, short chip duration, long code sequences, multiple phase level and tunable superstructured fiber Bragg gratings (SSFBGs), by using t...

  10. Photosensitivity of Germanium-Doped Silica Fibers, Mask Fabrication of Fiber Bragg Gratings, and Their Application as a Strain Sensor.

    Science.gov (United States)

    Prohaska, John Dennis

    This thesis addresses issues related to the formation and application of fiber Bragg gratings. A description of existing methods of grating formation is reviewed. Also, mechanisms for photo-induced refractive index changes in germanium doped silica fibers are examined. A new method of fiber Bragg grating formation is proposed and experimentally verified using diffraction masks. The near field diffraction theory of Fresnel images is described in relation to this new method. Bragg reflectors have been experimentally produced in germanium doped silica optical fibers through the use of a surface relief phase mask. By the addition of an optical system the period of the produced grating may be changed. The wavelength of a fiber Bragg grating has been experimentally tuned using wave front shaping optics. The application of fiber Bragg grating as a strain sensor is examined in the context of a civil engineering environment. The issues and advantages of fiber Bragg gratings as devices for distributed strain measurements in large scale concrete structures are experimentally evaluated.

  11. Inversion Domain Boundaries in GaN Wires Revealed by Coherent Bragg Imaging.

    Science.gov (United States)

    Labat, Stéphane; Richard, Marie-Ingrid; Dupraz, Maxime; Gailhanou, Marc; Beutier, Guillaume; Verdier, Marc; Mastropietro, Francesca; Cornelius, Thomas W; Schülli, Tobias U; Eymery, Joël; Thomas, Olivier

    2015-09-22

    Interfaces between polarity domains in nitride semiconductors, the so-called Inversion Domain Boundaries (IDB), have been widely described, both theoretically and experimentally, as perfect interfaces (without dislocations and vacancies). Although ideal planar IDBs are well documented, the understanding of their configurations and interactions inside crystals relies on perfect-interface assumptions. Here, we report on the microscopic configuration of IDBs inside n-doped gallium nitride wires revealed by coherent X-ray Bragg imaging. Complex IDB configurations are evidenced with 6 nm resolution and the absolute polarity of each domain is unambiguously identified. Picoscale displacements along and across the wire are directly extracted from several Bragg reflections using phase retrieval algorithms, revealing rigid relative displacements of the domains and the absence of microscopic strain away from the IDBs. More generally, this method offers an accurate inner view of the displacements and strain of interacting defects inside small crystals that may alter optoelectronic properties of semiconductor devices. PMID:26322655

  12. A Bragg Magnifier with Sub-μm Resolution Using High Energy Synchrotron Light

    International Nuclear Information System (INIS)

    X-ray computer microtomography using synchrotron light (SRμCT) has proven to be a highly powerful method in many fields of modern research as medicine, biology and material science. Presently used instruments, however, are limited to about 1μm resolution at a total efficiency of a few percent, due to the properties of the scintillator, the optical light transfer, and the CCD granularity. To overcome these limitations we have realized a novel approach based on extremely asymmetrical Bragg reflection. Our instrument, the 'Bragg Magnifier' combines two asymmetrically cut Si crystals, mounted close to each other on two rotation and adjustment units. It is installed at the Materials Science Beamline of the Swiss Light Source (SLS). It operates at favorably high energies between 21 keV and 23 keV. In a first experiment using a human bone trabecula a two-dimensional magnification factor of 100x100 was achieved yielding a spatial resolution of 140nm

  13. Liquid Resin Infusion process monitoring with embedded superimposed long period and short period Bragg grating sensor.

    Directory of Open Access Journals (Sweden)

    Robert L.

    2010-06-01

    Full Text Available We propose here the monitoring of the Liquid Resin Infusion (LRI process for using a superimposed long period (LPG and short period (FBG Bragg grating sensor. Monitoring of such a process is usually made measuring simultaneously temperature and strain by the use of an electro-optical device (FBG-Thermocouple. It has been shown that an applied solicitation is measured by a wavelength shift with a different sensitivity for LPG and FBG; thus strain and temperature influences can be determined separately by measuring corresponding wavelength shifts. The reported configuration is based on the use of these two Bragg gratings types written in the same fibre section, which allows us to discriminate the contributions of the temperature and strain. The sensor is embedded in a composite specimen manufactured by LRI process for monitoring in real time and simultaneously the applied temperature and strain.

  14. Spectral interference fringes in chirped large-mode-area fiber Bragg gratings

    Science.gov (United States)

    Poozesh, Reza; Madanipour, Khosro; Vatani, Vahid

    2016-09-01

    Spectral interference fringes were experimentally observed in chirped large mode area fiber Bragg grating (CFBG) in the overlapping region of the reflected spectrum of fiber modes by a high resolution spectrometer. It was demonstrated that the interference is due to optical path difference of the reflected modes in slight chirped FBGs. By assuming chirped fiber Bragg gratings as a Fabry-Perot (FP) cavity, free spectral range (FSR) of FP was calculated 0.08 nm which is matched with measurement very well. Furthermore, the experiments show that axial tension and temperature changes of the CFBG do not have observable effects on the magnitude of FSR, however coiling of the fiber deceases spectral interference fringe amplitude without sensible effect on FSR magnitude. The results of this work can be utilized in bending sensors.

  15. The mass dependence of the signal peak height of a Bragg-curve ionization chamber

    International Nuclear Information System (INIS)

    The Bragg-curve detector of the parallel plate ionization chamber type generates a signal that is a distorted replica of the original Bragg-curve. In result of this distortion, the signal peak height is not only a function of the atomic number of the heavy ion, as it is often stated, but also of the particle mass. This mass effect was studied with the aid of computer simulation, and it was found to be dependent on the Frisch grid to anode gap width and on the detector gas. The charge resolution of the detector is affected very significantly by this mass dependence of the signal peak height. Therefore, a careful selection of the detector gas and the grid to anode gap width is necessary, if good charge resolution over a wide range of heavy ions is required. (orig.)

  16. The mass dependence of the signal peak height of a Bragg-curve ionization chamber

    Science.gov (United States)

    Shenhav, N. J.; Stelzer, H.

    1985-01-01

    The Bragg-curve detector of the parallel plate ionization chamber type generates a signal that is a distorted replica of the original Bragg-curve. In result of this distortion, the signal peak height is not only a function of the atomic number of the heavy ion, as it is often stated, but also of the particle mass. This mass effect was studied with the aid of computer simulation, and it was found to be dependent on the Frisch grid to anode gap width and on the detector gas. The charge resolution of the detector is affected very significantly by this mass dependence of the signal peak height. Therefore, a careful selection of the detector gas and the grid to anode gap width is necessary, if good charge resolution over a wide range of heavy ions is required.

  17. Covalent Attachment of Carbohydrate Derivatives to an Evanescent Wave Fiber Bragg Grating Biosensor

    Directory of Open Access Journals (Sweden)

    Christopher J. Stanford

    2009-01-01

    Full Text Available A carbohydrate-based biosensor was prepared by functionalization of the surface of an etched fiber Bragg grating with a glucopyranosyl-siloxane conjugate. Functionalization of the surface with the conjugate resulted in a Bragg grating shift of 24 pm. This shift in the refractive index is consistent with a theoretical shift calculated assuming monolayer coverage of the glucose conjugate on the sensor. The resulting functionalized fiber was shown to interact selectively with concanavalin A (Con A, a glucose binding protein (lectin. Exposure of the glucose-functionalized fiber to peanut agglutinin, a galactosebinding lectin, did not result in a change of the refractive index corresponding to a binding event.

  18. Tunable Light Filtering in a Bragg Mirror/Heavily-Doped Semiconducting Nanocrystal Composite

    CERN Document Server

    Kriegel, Ilka

    2014-01-01

    Tunable light filters are critical components for many optical applications in which light in-coupling, out-coupling or rejection is crucial, such as lasing, sensing, photovoltaics and information and communication technology. For this purpose, Bragg mirrors, band-pass filters with high reflectivity represent good candidates. However, their optical characteristics are determined at the stage of fabrication. Heavily doped semiconductor nanocrystals (NCs) on the other hand deliver a high degree of optical tunability through the active modulation of their carrier density ultimately influencing their plasmonic absorption properties. Here, we propose the design of a tunable light filter composed of a Bragg mirror and a layer of plasmonic semiconductor NCs. We demonstrate that the filtering properties of the coupled device can be tuned to cover a wide range of frequencies from the visible to the near infrared (vis-NIR) spectral region when employing varying carrier densities. As tunable component we implemented a d...

  19. Energy dispersive X-ray fluorescence analysis with Bragg polarized Mo radiation

    International Nuclear Information System (INIS)

    The aim of introducing energy dispersive analysis into X-ray fluorescence analysis is to suppress background from the Bremsstrahlung spectrum and the characteristic radiation without an undue reduction of the signal. The variant under consideration uses linearly polarization radiation obtained after a Bragg reflection,under delta = 900. In an introductory part, Bragg reflection, fluorescence and strong radiation are considered quantitatively with respect to counting statistics and detection limits. In the experimental part two combinations are describe, of a Ta crystal with a Cr tube and of a Mo crystal with a Mo tube. Details of adjustment, sample preparation and calibration and detection limits are given. The pros and cons of the Ta/Cr and the Mo/Mo are contrasted and proposals for further improvements are given. (G.Q.)

  20. Anderson localization in a partially random Bragg grating and a conserved area theorem

    CERN Document Server

    Mafi, Arash

    2015-01-01

    We investigate the gradual emergence of the disorder-related phenomena in intermediate regimes between a deterministic periodic Bragg grating and a fully random grating and highlight two critical properties of partially disordered Bragg gratings. First, the integral of the logarithm of the transmittance over the reciprocal wavevector space is a conserved quantity. Therefore, adding disorder merely redistributes the transmittance over the reciprocal space. Second, for any amount of disorder, the average transmittance decays exponentially with the number of grating layers in the simple form of $\\exp(-\\eta N)$ for sufficiently large $N$, where $\\eta$ is a constant and $N$ is the number of layers. Conversely, the simple exponential decay form does not hold for small $N$ except for a highly disordered system. Implications of these findings are demonstrated.

  1. Dental composite resins: measuring the polymerization shrinkage using optical fiber Bragg grating sensors

    Science.gov (United States)

    Ottevaere, H.; Tabak, M.; Chah, K.; Mégret, P.; Thienpont, H.

    2012-04-01

    Polymerization shrinkage of dental composite materials is recognized as one of the main reasons for the development of marginal leakage between a tooth and filling material. As an alternative to conventional measurement methods, we propose optical fiber Bragg grating (FBG) based sensors to perform real-time strain and shrinkage measurements during the curing process of dental resin cements. We introduce a fully automated set-up to measure the Bragg wavelength shift of the FBG strain sensors and to accurately monitor the linear strain and shrinkage of dental resins during curing. Three different dental resin materials were studied in this work: matrix-filled BisGMA-based resins, glass ionomers and organic modified ceramics.

  2. Fiber optic relative humidity sensor based on the tilted fiber Bragg grating coated with graphene oxide

    Science.gov (United States)

    Wang, Youqing; Shen, Changyu; Lou, Weimin; Shentu, Fengying; Zhong, Chuan; Dong, Xinyong; Tong, Limin

    2016-07-01

    A fiber optic relative humidity (RH) sensor based on the tilted fiber Bragg grating (TFBG) coated with graphene oxide (GO) film was presented. Amplitudes of the cladding mode resonances of the TFGB varies with the water sorption and desorption processes of the GO film, because of the strong interactions between the excited backward propagating cladding modes and the GO film. By detecting the transmission intensity changes of the cladding mode resonant dips at the wavelength of 1557 nm, the maximum sensitivity of 0.129 dB/%RH with a linear correlation coefficient of 99% under the RH range of 10-80% was obtained. The Bragg mode of TFBG can be used as power or wavelength references, since it is inherently insensitive to RH changes. In addition, the proposed humidity sensor shows a good performance in repeatability and stability.

  3. Detecting stripe phase in spin-orbit coupled condensates via optical Bragg scattering

    Science.gov (United States)

    Putra, Andika; Carcoba, Francisco Salces; Yue, Yuchen; Sugawa, Seiji; Spielman, Ian

    2016-05-01

    The stripe phase in spin-orbit coupled condensates has been predicted theoretically but not yet been observed. This peculiar feature, analogue to supersolidity, originates from the interaction effects and spin-momentum locking between different spin states. Motivated by recent observation of antiferromagnetic correlations in cold atoms, we explore the feasibility of Bragg diffraction to observe the stripe phase. Here, we create spin-orbit coupled condensates in f = 1 ground state manifold of Rb87 using a pair of cross-polarized 790.02 nm counter-propagating laser beams. Using similar setup, we make a spin-dependent one dimensional lattice and demonstrate Bragg scattering of light to calibrate the atomic density distribution. This enables us to do a direct measure of the stripe phase.

  4. A Laue–Bragg monolithic beam splitter for efficient X-ray 2-beam imaging

    Energy Technology Data Exchange (ETDEWEB)

    Oberta, P., E-mail: peter.oberta@rigaku.com [Swiss Light Source, Paul Scherrer Institut, CH-5232 Villigen (Switzerland); Institute of Physics, Academy of Sciences of the Czech Republic, v.v.i., Na Slovance 2, CZ-18221 Praha 8 (Czech Republic); Mokso, R. [Swiss Light Source, Paul Scherrer Institut, CH-5232 Villigen (Switzerland)

    2013-03-01

    Newly emerging techniques for probing matter simultaneously by two spatially and angularly separated X-ray beams require efficient and versatile beam splitting. We present a Laue–Bragg monolithic crystal beam splitter in the form of an L-shaped monolithic Si crystal. By simultaneous Laue and Bragg diffractions the X-ray beam is split into a transmitted polychromatic and a diffracted monochromatic branch with a spatial separation of tens of millimeters. The energy spectrum of the transmitted branch can be tuned via diffraction on a second crystal re-creating a beam intersection on the sample. We propose three multi-modal imaging setups exploiting the large angular separation of the two intersecting beams provided by the proposed optics. Photon efficiency and dual-energy operation are the main assets of our scheme as compared to other existing setups. The theoretical description for an energy range between 10 keV and 30 keV was developed.

  5. Guiding Properties of Silica/Air Hollow-Core Bragg Fibers

    DEFF Research Database (Denmark)

    Foroni, Matteo; Passaro, Davide; Poli, Federica;

    2008-01-01

    The guiding properties of realistic silica/air hollow-core Bragg fibers have been investigated by calculating the dispersion curves, the confinement loss spectrum and the field distribution of the guided modes through a full-vector modal solver based on the finite element method. In particular, the...... dispersion curves, associated to the transition of the fundamental mode into a surface one. It has been shown that surface modes are responsible of the sharp loss peaks, also experimentally measured, which pollute the loss spectrum of the fundamental mode and of the higher-order ones. Then, the influence on...... the guiding properties of each geometric characteristic in the hollow-core Bragg fiber cross-section has been deeply investigated, thus showing which parameter it is better to change in order to properly modify the loss values or its spectral behaviour. Moreover, in order to improve the loss...

  6. Practical biological spread-out Bragg peak design of carbon beam

    CERN Document Server

    Kim, Chang Hyeuk; Chang, Seduk; Jang, Hong Suk; Kim, Jeong Hwan; Park, Dong Wook; Hwang, Won Taek; Yang, Tea-Keun

    2015-01-01

    The carbon beams show more advantages on the biological properties compared with proton beams in radiation therapy. The carbon beam shows high linear energy transfer (LET) to medium and it increases the relative biological effectiveness (RBE). To design spread-out Bragg peak (SOBP) of biological dose using carbon beam, a practical method was purposed by using the linear-quadratic (LQ) model and Geant4 based Monte Carlo simulation code. The various Bragg peak profiles and LET was calculated for each slice at the target region. To generate appropriate biological SOBP, a set of weighting factor, which is a power function in terms of energy step, was applied to the obtained each physical dose. The designed biological SOBP showed 1.34 % of uniformity.

  7. A strain-induced birefringent double-clad fiber Bragg grating

    Institute of Scientific and Technical Information of China (English)

    Lijun Li; Lei Sun; Wande Fan; Zhi Wang; Jianhua Luo; Shenggui Fu; Shuzhong Yuan; Xiaoyi Dong

    2005-01-01

    @@ A strain-induced birefringence double-clad (DC) fiber Bragg grating (FBG) is proposed and demonstrated.The grating is fabricated in the core of rectangular inner cladding double clad fiber by using phase mask method. By applying lateral strain on the grating, the birefringence is induced. In order to detect the birefringent effect of the grating, we use it as the output mirror of a laser. When lateral strain is applied,the grating becomes birefringent. Therefore, one reflection peak of double-clad fiber Bragg grating becomes two peaks and the laser also lases in two wavelengths. The wavelength spacing of the laser can be tuned from 0 to 0.8 nm. The absolute wavelengths for the two polarizations can be tuned 1.2 and 2.0 nm,respectively.

  8. Measurements of Ion Stopping Around the Bragg Peak in High-Energy-Density Plasmas.

    Science.gov (United States)

    Frenje, J A; Grabowski, P E; Li, C K; Séguin, F H; Zylstra, A B; Gatu Johnson, M; Petrasso, R D; Glebov, V Yu; Sangster, T C

    2015-11-13

    For the first time, quantitative measurements of ion stopping at energies around the Bragg peak (or peak ion stopping, which occurs at an ion velocity comparable to the average thermal electron velocity), and its dependence on electron temperature (T(e)) and electron number density (n(e)) in the range of 0.5-4.0 keV and 3×10(22) to 3×10(23) cm(-3) have been conducted, respectively. It is experimentally demonstrated that the position and amplitude of the Bragg peak varies strongly with T(e) with n(e). The importance of including quantum diffraction is also demonstrated in the stopping-power modeling of high-energy-density plasmas. PMID:26613448

  9. Dose ratio proton radiography using the proximal side of the Bragg peak

    Energy Technology Data Exchange (ETDEWEB)

    Doolan, P. J., E-mail: paul.doolan.09@ucl.ac.uk; Royle, G.; Gibson, A. [Department of Medical Physics and Bioengineering, University College London, London WC1E 6BT (United Kingdom); Lu, H.-M. [Department of Radiation Oncology, Massachusetts General Hospital, Boston, Massachusetts 02114 (United States); Prieels, D.; Bentefour, E. H. [Ion Beam Applications (IBA), 3 Chemin du Cyclotron, Louvain la Neuve B-1348 (Belgium)

    2015-04-15

    Purpose: In recent years, there has been a movement toward single-detector proton radiography, due to its potential ease of implementation within the clinical environment. One such single-detector technique is the dose ratio method in which the dose maps from two pristine Bragg peaks are recorded beyond the patient. To date, this has only been investigated on the distal side of the lower energy Bragg peak, due to the sharp falloff. The authors investigate the limits and applicability of the dose ratio method on the proximal side of the lower energy Bragg peak, which has the potential to allow a much wider range of water-equivalent thicknesses (WET) to be imaged. Comparisons are made with the use of the distal side of the Bragg peak. Methods: Using the analytical approximation for the Bragg peak, the authors generated theoretical dose ratio curves for a range of energy pairs, and then determined how an uncertainty in the dose ratio would translate to a spread in the WET estimate. By defining this spread as the accuracy one could achieve in the WET estimate, the authors were able to generate lookup graphs of the range on the proximal side of the Bragg peak that one could reliably use. These were dependent on the energy pair, noise level in the dose ratio image and the required accuracy in the WET. Using these lookup graphs, the authors investigated the applicability of the technique for a range of patient treatment sites. The authors validated the theoretical approach with experimental measurements using a complementary metal oxide semiconductor active pixel sensor (CMOS APS), by imaging a small sapphire sphere in a high energy proton beam. Results: Provided the noise level in the dose ratio image was 1% or less, a larger spread of WETs could be imaged using the proximal side of the Bragg peak (max 5.31 cm) compared to the distal side (max 2.42 cm). In simulation, it was found that, for a pediatric brain, it is possible to use the technique to image a region with a

  10. Terahertz Photonic Crystal Quantum Cascade Laser Coupled to a Second Order Bragg Vertical Extractor

    International Nuclear Information System (INIS)

    Full text: Few approaches for surface emitting THz Quantum cascade Lasers (QCL) demonstrated the lasing of a second-order Bragg metallic grating patterned on top of a ridge or a surface emitting photonic crystal (PhC). PhC band-edge lasers with improved performance compared to Fabry-Perot lasers have already been reported. In this work a surface emitting band edge 2D PhC QCL is presented, using a second-order Bragg grating as a boundary condition. We show single mode devices operating around 3.1 THz with a maximum operating temperature of 125 K in pulsed operation, 100 K in CW, a far-field divergence of less than 20° or up to 12 mW of peak output power. (author)

  11. Interaction of spatial solitons with a gapless stripe embedded into a Bragg-grating area

    International Nuclear Information System (INIS)

    We introduce a model in which the grating is absent in a finite-width stripe in the waveguide, thus creating a gapless channel in the gapped medium. Two semi-infinite grating separated by the plain stripe may have a relative phase shift. This system modifies the Bragg bandgap, creating intra-gap defect modes (DFs) which are pinned to the gapless channel. A DF solution in the linear system is found analytically. Further, numerical analysis of the full nonlinear system demonstrates that the shape and stability of Bragg solitons are also strongly affected by the presence of the gapless channel, and by the possible phase shift between the two semi-infinite gratings. In particular, asymmetric and flat-top solitons appear

  12. Large Bragg Reflection from One-Dimensional Chains of Trapped Atoms Near a Nanoscale Waveguide

    CERN Document Server

    Corzo, N V; Chandra, A; Goban, A; Sheremet, A S; Kupriyanov, D V; Laurat, J

    2016-01-01

    We report experimental observations of large Bragg reflection from arrays of cold atoms trapped near a one-dimensional nanoscale waveguide. By using an optical lattice in the evanescent field surrounding a nanofiber with a period close to commensurate with the resonant wavelength, we observe a reflectance up to 75% for the guided mode. Each atom behaves as a partially-reflecting mirror and an ordered chain of about 2000 atoms is sufficient to realize an efficient Bragg mirror. Measurements of the reflection spectra as a function of the lattice period and the probe polarization are reported. The latter shows the effect of the chiral character of nanoscale waveguides on this reflection. The ability to control photon transport in 1D waveguides coupled to spin systems would allow for novel quantum network capabilities and many-body effects emerging from long-range interactions.

  13. Measuring the fine structure constant with Bragg diffraction and Bloch oscillations

    Science.gov (United States)

    Yu, Chenghui; Estey, Brian; Parker, Richard; Dudley, Jordan; Müller, Holger

    2016-05-01

    We have demonstrated a new scheme for atom interferometry based on large-momentum-transfer Bragg beam splitters and Bloch oscillations. In this new scheme, we have achieved a resolution of δα / α =0.25ppb in the fine structure constant measurement, which gives up to 4.4 million radians of phase difference between freely evolving matter waves. We have suppressed many systematic effects known in most atom interferometers with Raman beam splitters such as light shift, Zeeman effect shift as well as vibration. We have also simulated multi-atom Bragg diffraction to understand sub-ppb systematic effects, and implemented spatial filtering to further suppress systematic effects. We present our recent progress toward a measurement of the fine structure constant, which will provide a stringent test of the standard model of particle physics.

  14. Measuring h /mCs and the Fine Structure Constant with Bragg Diffraction and Bloch Oscillations

    Science.gov (United States)

    Parker, Richard

    2016-05-01

    We have demonstrated a new scheme for atom interferometry based on large-momentum-transfer Bragg beam splitters and Bloch oscillations. In this new scheme, we have achieved a resolution of δα / α =0.25ppb in the fine structure constant measurement, which gives up to 4.4 million radians of phase difference between freely evolving matter waves. We suppress many systematic effects, e.g., Zeeman shifts and effects from Earth's gravity and vibrations, use Bloch oscillations to increase the signal and reduce the diffraction phase, simulate multi-atom Bragg diffraction to understand sub-ppb systematic effects, and implement spatial filtering to further suppress systematic effects. We present our recent progress toward a measurement of the fine structure constant, which will provide a stringent test of the standard model of particle physics.

  15. Simultaneous measurement of temperature and pressure using single fiber Bragg grating and fixed filter demodulation technique

    Science.gov (United States)

    Nunes, Luiz C. S.; Valente, L. C. G.; Llerena, R. W. A.; Braga, Arthur M.; Triques, A. L. C.

    2004-10-01

    Fiber Bragg grating (FBG) sensors offer many advantages for monitoring strain and temperature, other physical parameters can be measured through the use of mechanical transducers. However, FBGs are sensitive to strain and temperature and, in many cases, it is difficult to discrminate both measurements. To overcome this problem several techniques have been proposed, most of them employing more than one grating. This work demonstrates the possibility to discriminate temperature and pressure measurements using only one FBG sensor and a low cost demodulation technique based on two fixed filters. A pressure transducer has been used to transfer a lateral force to the fiber, proportional to the applied pressure, generating birefringence in the Bragg grating. The system allowed to measure pressure in the range of 0 to 400 psi with uncertainty of 4 psi and, simultaneously, measure temperature in a range of 22°C with uncertainty of 0.1°C.

  16. A Noncontact Force Sensor Based on a Fiber Bragg Grating and Its Application for Corrosion Measurement

    Directory of Open Access Journals (Sweden)

    Antonio C. Bruno

    2013-08-01

    Full Text Available A simple noncontact force sensor based on an optical fiber Bragg grating attached to a small magnet has been proposed and built. The sensor measures the force between the magnet and any ferromagnetic material placed within a few millimeters of the sensor. Maintaining the sensor at a constant standoff distance, material loss due to corrosion increases the distance between the magnet and the corroded surface, which decreases the magnetic force. This will decrease the strain in the optical fiber shifting the reflected Bragg wavelength. The measured shift for the optical fiber used was 1.36 nm per Newton. Models were developed to optimize the magnet geometry for a specific sensor standoff distance and for particular corrosion pit depths. The sensor was able to detect corrosion pits on a fuel storage tank bottom with depths in the sub-millimeter range.

  17. Coupled-modetheory for magneto-optical fiber Bragg grating under non-uniform magnetic field

    Institute of Scientific and Technical Information of China (English)

    LIU Fen; WU Bao-jian; LU Xin

    2011-01-01

    According to the perturbation theory,the coupled-mode equations for guided optical waves in the magneto-optical fiber Bragg gratings(MFBGs) under non-uniform magnetic field are derived.The equivalent relation between the magneticallyinduced non-uniform fiber Bragg grating(MnFBG) and the corresponding non-magnetic chirped grating is expressed and verified by the piecewise-uniform MFBG model under linear magnetic field.On the basis of the equivalent relation,the MnFBGs can be effectively investigated by means of simulations.The characteristics of the MnFBGs under three typical magnetic field distributions with application to optical pulse compression are simulated,and the minimal pulse width can be achieved for the same magneto-optical coupling parameter of 2.2 × 103 m-1.

  18. Non-Bragg-gap solitons in one-dimensional Kerr-metamaterial Fibonacci heterostructures

    Science.gov (United States)

    Reyes-Gómez, E.; Cavalcanti, S. B.; Oliveira, L. E.

    2015-06-01

    A detailed study of non-Bragg-gap solitons in one-dimensional Kerr-metamaterial quasiperiodic Fibonacci heterostructures is performed. The transmission coefficient is numerically obtained by combining the transfer-matrix formalism in the metamaterial layers with a numerical solution of the nonlinear differential equation in the Kerr slabs, and by considering the loss effects in the metamaterial slabs. A switching from states of no transparency in the linear regime to high-transparency states in the nonlinear regime is observed for both zero-order and plasmon-polariton gaps. The spatial localization of the non-Bragg-gap solitons is also examined, and the symmetry properties of the soliton waves are briefly discussed.

  19. Proof of Concept of Impact Detection in Composites Using Fiber Bragg Grating Arrays

    Directory of Open Access Journals (Sweden)

    Ander Montero

    2013-09-01

    Full Text Available Impact detection in aeronautical structures allows predicting their future reliability and performance. An impact can produce microscopic fissures that could evolve into fractures or even the total collapse of the structure, so it is important to know the location and severity of each impact. For this purpose, optical fibers with Bragg gratings are used to analyze each impact and the vibrations generated by them. In this paper it is proven that optical fibers with Bragg gratings can be used to detect impacts, and also that a high-frequency interrogator is necessary to collect valuable information about the impacts. The use of two interrogators constitutes the main novelty of this paper.

  20. Feasibility studies of Bragg probe for noninvasive carotid pulse waveform assessment

    Science.gov (United States)

    Leitão, Cátia; Bilro, Lúcia; Alberto, Nélia; Antunes, Paulo; Lima, Hugo; André, Paulo S.; Nogueira, Rogério; Pinto, João L.

    2013-01-01

    The arterial stiffness evaluation is largely reported as an independent predictor of cardiovascular diseases. The central pulse waveform can provide important data about arterial health and has been studied in patients with several pathologies, such as diabetes mellitus, coronary artery disease and hypertension. The implementation and feasibility studies of a fiber Bragg grating probe for noninvasive monitoring of the carotid pulse are described based on fiber Bragg grating technology. Assessment tests were carried out in carotids of different volunteers and it was possible to detect the carotid pulse waveform in all subjects. In one of the subjects, the sensor was also tested in terms of repeatability. Although further tests will be required for clinical investigation, the first studies suggest that the developed sensor can be a valid alternative to electromechanical tonometers.

  1. Utilization of monolayer MoS2 in Bragg stacks and metamaterial structures as broadband absorbers

    Science.gov (United States)

    Mukherjee, Bablu; Simsek, Ergun

    2016-06-01

    We numerically study the possibility of using atomically thin transition metal dichalcogenides (TMDs) for applications requiring broadband absorption in the visible range of the electromagnetic spectrum. We demonstrate that when monolayer TMDs are positioned into a finite-period of multilayer Bragg stack geometry, they make broadband, wide-angle, almost polarization-independent absorbers. In our study, we consider molybdenum disulfide (MoS2) and silicon dioxide (SiO2) as semiconducting and dielectric thin film of alternate high- and low- index films, respectively. By optimizing the thickness of the SiO2 film, we find that monolayer MoS2 based Bragg stacks can absorb 94.7% of the incident energy in the visible (350-700 nm). Similar structures can be engineered to make perfect reflectors for saturable absorption applications. We also demonstrate that bandwidth of metamaterial absorbers can be expanded using monolayer TMDs.

  2. EIT-like transmission by interaction between multiple Bragg scattering and local plasmonic resonances

    Science.gov (United States)

    Liu, Z. Z.; Zhang, Q.; Xiao, J. J.

    2016-01-01

    We study the optical properties associated with both the polariton gap and the Bragg gap in periodic resonator-waveguide coupled systems, based on the temporal coupled mode theory and the transfer matrix method. Using the complex band and the transmission spectrum, it is feasible to tune the interaction between multiple Bragg scattering and local resonance, which may give rise to analogous phenomena of electromagnetically induced transparency (EIT). We further design a plasmonic slot waveguide side-coupled with local plasmonic resonators to demonstrate the EIT-like effects in the near-infrared band. Numerical calculations show that realistic amounts of metal Joule loss may destroy the interference and the total absorption is enhanced in the transparency window due to the near zero group velocity of the guiding wave.

  3. William Henry Bragg in Adelaide: beginning research at a colonial locality.

    Science.gov (United States)

    Jenkin, John

    2004-03-01

    This essay presents an account of W. H. Bragg's earliest research program in Australia during the years 1904-1907: a study of the behavior of alpha particles from radioactive decay. It is suggested that problems associated with distance and isolation played a pivotal role in Bragg's thinking and acting during this period and that his use of two "advocates," Ernest Rutherford and Frederick Soddy, was essential to the success of the program. It is further argued that this account supports a substantial amendment of the center-periphery model of colonial science to embrace a much closer attention to place and locality; that is, it supports a polycentric model (in which the center might still be prominent). PMID:15301067

  4. Enhancement of QDs' fluorescence based on porous silicon Bragg mirror

    International Nuclear Information System (INIS)

    We fabricated a new porous silicon photonic device which is a special multi-layer porous silicon including two different single layer porous silicon and a porous silicon Bragg mirror, and investigated the influence of porous silicon Bragg mirror's structure on the fluorescence intensity of quantum dots (QDs) which infiltrated into porous silicon device, and CdSe/ZnS QDs we used emit at 605 nm and 625 nm respectively. By immersing porous silicon samples in QDs solution, QDs were successfully infiltrated into porous silicon devices which have high reflection band at or beyond fluorescence peak. Experimental results show that the fluorescence intensity of QDs which infiltrated into the first layer of porous silicon device can be enhanced when fluorescence peak falls into the high reflection band of porous silicon device

  5. Multiband processing of multimode light: combining 3D photonic lanterns with waveguide Bragg gratings

    CERN Document Server

    Spaleniak, Izabela; Jovanovic, Nemanja; Williams, Robert J; Lawrence, Jon S; Ireland, Michael J; Withford, Michael J

    2013-01-01

    The first demonstration of narrowband spectral filtering of multimode light on a 3D integrated photonic chip using photonic lanterns and waveguide Bragg gratings is reported. The photonic lanterns with multi-notch waveguide Bragg gratings were fabricated using the femtosecond direct-write technique in boro-aluminosilicate glass (Corning, Eagle 2000). Transmission dips of up to 5 dB were measured in both photonic lanterns and reference single-mode waveguides with 10.4-mm-long gratings. The result demonstrates efficient and symmetrical performance of each of the gratings in the photonic lantern. Such devices will be beneficial to space-division multiplexed communication systems as well as for units for astronomical instrumentation for suppression of the atmospheric telluric emission from OH lines.

  6. Optical fibres sensor based in the intensity switch of a linear laser with two Bragg gratings

    International Nuclear Information System (INIS)

    In this work we propose a new configuration for an optical fiber temperature sensor, based on a linear type Er-doped fiber laser. The laser cavity consists of an Er-doped fiber and two identical Bragg gratings at the fiber ends (working as reflectors). Temperature changes are detected by measuring, through one of the gratings, the intensity variations at the system's output. When the temperature of one of the Bragg gratings is modified, a wavelength shift of its spectral reflectivity is observed. Hence, the laser emission intensity of the system is modified. We present experimental results of the intensity switch observed when the temperature difference between the gratings detunes their spectral reflectance. Making use of this effect it is possible to develop limit comparators to bound the temperature range for the object under supervision. This limiting work can be performed with a high sensitivity using a very simple interrogation procedure. (Author)

  7. Generalized Fibonacci zone plates

    CERN Document Server

    Ke, Jie; Zhu, Jianqiang

    2015-01-01

    We propose a family of zone plates which are produced by the generalized Fibonacci sequences and their axial focusing properties are analyzed in detail. Compared with traditional Fresnel zone plates, the generalized Fibonacci zone plates present two axial foci with equal intensity. Besides, we propose an approach to adjust the axial locations of the two foci by means of different optical path difference, and further give the deterministic ratio of the two focal distances which attributes to their own generalized Fibonacci sequences. The generalized Fibonacci zone plates may allow for new applications in micro and nanophotonics.

  8. Design of a Pressure Sensor Based on Optical Fiber Bragg Grating Lateral Deformation

    OpenAIRE

    Jaroslav Kadlec; Radek Kuchta; Radek Vlach; Frantisek Urban

    2010-01-01

    This paper describes steps involved in the design and realization of a new type of pressure sensor based on the optical fiber Bragg grating. A traditional pressure sensor has very limited usage in heavy industrial environments, particularly in explosive or electromagnetically noisy environments. Utilization of optics in these environments eliminates all surrounding influences. An initial motivation for our development was the research, experimental validation, and realization of a complex sma...

  9. Study on Bragg Curve Spectrometry for Identifying Heavy Ions for AMS Measurement

    Institute of Scientific and Technical Information of China (English)

    LIGuo-qiang; HEMing; GUANYong-jing; DONGKe-jun; WANGHui-juan; LUOLi-xiong; JIANGShan

    2003-01-01

    Isobaric interference is the main problem that should be overcome in AMS. High resolution detectors should be used in AMS measurement, so that a Bragg curve detector was set up in Chinese Institute of Atomic Energy. The detector has a better energy and charge resolution over quite a wide range, and the total energy of particles entered into the detector is lost in the gas chamber.

  10. Fiber optic Bragg grating sensor network installed in a concrete road bridge

    Science.gov (United States)

    Maaskant, Robert; Alavie, A. Tino; Measures, Raymond M.; Ohn, Myo M.; Karr, Shawn E.; Glennie, Derek J.; Wade, C.; Tadros, Gamil; Rizkalla, Sami

    1994-05-01

    The installation of a fiber optic Bragg grating strain sensor network in a new road bridge is described. These sensors are attached to prestressing tendons embedded in prefabricated concrete girders. Three types of prestressing tendons are being monitored: conventional steel strand and two types of carbon fibers reinforced plastic tendons. Sensor durability issues are reviewed and the installation is described. Initial measurements indicate that the sensors are operational and provide some early comparison of tendon performance.

  11. A simple method of shielding area detectors from unwanted Bragg diffraction

    Czech Academy of Sciences Publication Activity Database

    Fábry, Jan; Kopecký, Miloš; Kub, Jiří

    2006-01-01

    Roč. 39, - (2006), s. 127-127. ISSN 0021-8898 R&D Projects: GA AV ČR(CZ) IAA100100529 Grant ostatní: IA-SFS(XE) RII3-CT-2004-506008 Institutional research plan: CEZ:AV0Z10100520 Keywords : shilelding unwanted Bragg diffraction * synchrotron X-ray sources * permanent magnets Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 2.495, year: 2006

  12. Tunable Mesoporous Bragg Reflectors Based on Block-Copolymer Self-Assembly

    OpenAIRE

    Guldin, S.; Kolle, M.; Stefik, M.; Langford, R; Eder, D.; Wiesner, U.; Steiner, U.

    2011-01-01

    Mesoporous Bragg reflectors are a promising materials platform for photovoltaics, light emission, and sensing. A fast and versatile fabrication route that relies on the self-assembly of the block copolymer poly(isoprene-b-ethylene oxide) in combination with simple sol-gel chemistry is reported. The method allows extended control over porosity and pore size in the resulting inorganic material and results in high-quality optical elements.

  13. The Bragg regime of the two-particle KapitzaDirac effect

    OpenAIRE

    Sancho, Pedro

    2011-01-01

    Abstract We analyze the Bragg regime of the two-particle Kapitza-Dirac arrangement , completing the basic theory of this effect. We provide a detailed evaluation of the detection probabilities for multi-mode states, showing that a complete description must include the interaction time in addition to the usual dimensionless parameter w. The arrangement can be used as a massive two-particle beam splitter. In this respect, we present a comparison with Hong-Ou-Mandel-type experiments in quantu...

  14. Measurement Model for the Maximum Strain in Beam Structures Using Multiplexed Fiber Bragg Grating Sensors

    OpenAIRE

    Se Woon Choi; Jihoon Lee; Bo Hwan Oh; Hyo Seon Park

    2013-01-01

    This study develops a strain measurement model for beam structures subjected to multiloading conditions by defining the strain-shape function and participation factors to overcome the limitations of strain measurements using fiber Bragg grating (FBG) strain sensors. Using the proposed model, the maximum strain in a beam is obtained by the sum of the strains caused by the different loadings acting separately. In this paper, the strain-shape functions for various loading and support conditions ...

  15. Inverse-Gaussian-Apodized Fiber Bragg Grating for Dual Wavelength Lasing

    CERN Document Server

    Lin, Bo; Tjin, Swee Chuan; Tang, Dingyuan; Hao, Jianzhong; Tay, Chia Meng; Liang, Sheng

    2010-01-01

    A fiber Bragg grating (FBG) with an inverse-Gaussian apodization function is proposed and fabricated. It is shown that such a FBG possesses easily controllable dual-wavelength narrow transmission peaks. Incorporating such a FBG filter in a fiber laser with a linear cavity, stable dual-wavelength emission with 0.146 nm wavelength spacing is obtained. It provides a simple and low cost approach of achieving the dual-wavelength fiber laser operation.

  16. Silicon waveguide polarization rotation Bragg grating with phase shift section and sampled grating scheme

    Science.gov (United States)

    Okayama, Hideaki; Onawa, Yosuke; Shimura, Daisuke; Yaegashi, Hiroki; Sasaki, Hironori

    2016-08-01

    We describe a Bragg grating with a phase shift section and a sampled grating scheme that converts input polarization to orthogonal polarization. A very narrow polarization-independent wavelength peak can be generated by phase shift structures and polarization-independent multiple diffraction peaks by sampled gratings. The characteristics of the device were examined by transfer matrix and finite-difference time-domain methods.

  17. 100 GHz electrically tunable planar Bragg grating via nematic liquid crystal overlay towards reconfigurable WDM networks

    OpenAIRE

    Adikan, Faisal Rafiq Mahamd; Gates, James C.; Major, Huw E.; Gawith, Corin B.E.; Smith, Peter G. R.; Dyadyusha, Andriy; Kaczmarek, Malgosia; Sparrow, Ian J.G.

    2007-01-01

    Novel liquid crystal-based integrated optical devices with >140GHz electrical tuning are presented for application towards reconfigurable wavelength division multiplexing (WDM) networks. Initial results with Bragg wavelength tuning covering five 25GHz WDM channel spacing have been achieved with 170V (peak-to-peak) sinusoidal voltages applied across electro-patterned ITO-covered glass electrodes placed 60?m apart. These prototype devices were fabricated using direct UV grating writing, with an...

  18. Performance analysis of peak tracking techniques for fiber Bragg grating interrogation systems

    OpenAIRE

    Olivero, Massimo; Tosi, Daniele; Perrone, Guido

    2012-01-01

    In this paper, we propose a spectral correlation-based technique for tracking the wavelength shift of a fiber Bragg grating. We compared this approach, by means of a Monte Carlo numerical simulation, to the typical peak tracking techniques applied in classic interrogation systems. As result, we obtained a considerable gain in terms of noise tolerance (about 20 dB), which can be further incremented by selecting large-bandwidth gratings. This permits to increase the power budget of a fiber Brag...

  19. Anomalous thermal dynamics of Bragg gratings inscribed in germanosilicate optical fiber

    OpenAIRE

    Rahman, A.; Madhav, Venu K; B. Srinivasan; S. Asokan

    2009-01-01

    An interesting, periodic appearance of a new peak has been observed in the reflected spectrum of a Fiber Bragg Grating (FBG) inscribed in a germanosilicate fiber during thermal treatment. The new peak occurs on the longer wavelength side of the spectrum during heating and on the shorter wavelength side during cooling, following an identical reverse dynamics. Comparison with a commercial grating with 99.9% reflectivity shows a similar decay dynamics. It is proposed that the distortion due to s...

  20. Structural Evolution of Colloidal Crystal Films in the Process of Melting Revealed by Bragg Peak Analysis

    OpenAIRE

    Sulyanova, Elena; Shabalin, Anatoly; Yefanov, Oleksandr; Zaluzhnyy, Ivan; Besedin, Ilya; Sprung, Michael; Petukhov, Andrei; Vartaniants, Ivan; Zozulya, Alexey; Meijer, Janne-Mieke; Dzhigaev, Dmitry; Gorobtsov, Oleg; Kurta, Ruslan; Lazarev, Sergey; Lorenz, Ulf

    2015-01-01

    In situ X-ray diffraction studies of structural evolution of colloidal crystal films formed by polystyrene spherical particles upon incremental heating are reported. The Bragg peak parameters, such as peak position, integrated intensity, and radial and azimuthal widths were analyzed as a function of temperature. A quantitative study of colloidal crystal lattice distortions and mosaic spread as a function of temperature was carried out using Williamson–Hall plots based on mosaic block model. T...

  1. Time division multiplexing of 106 weak fiber Bragg gratings using a ring cavity configuration

    Science.gov (United States)

    Wang, Zhi; Wen, Hongqiao; Luo, Zhihui; Dai, Yutang

    2016-06-01

    A time division multiplexing of 106 weak fibers Bragg gratings (FBGs) based on a ring resonant-cavity is demonstrated. A semiconductor optical amplifier is connected in the cavity to function as an amplifier as well as a switch. The 106 weak FBGs are written along a SMF-28 fiber in serial with peak reflectivity of about -30 dB and equal separations of 5 m. The crosstalk and spectral distortion are investigated through both theoretical analysis and experiments.

  2. Post-Impact Fatigue Damage Monitoring Using Fiber Bragg Grating Sensors

    OpenAIRE

    Chow-Shing Shin; Shien-Kuei Liaw; Shi-Wei Yang

    2014-01-01

    It has been shown that impact damage to composite materials can be revealed by embedded Fiber Bragg Gratings (FBG) as a broadening and splitting of the latter’s characteristic narrow peak reflected spectrum. The current work further subjected the impact damaged composite to cyclic loading and found that the FBG spectrum gradually submerged into a rise of background intensity as internal damages progressed. By skipping the impact, directing the impact to positions away from the FBG and examin...

  3. Ultrafast Self-Gating Bragg Diffraction of Exploding Nanocrystals in an X-ray Laser

    OpenAIRE

    Caleman, Carl; Tîmneanu, Nicuşor; Martin, Andrew V.; Jönsson, H. Olof; Aquila, Andrew; Barty, Anton; Scott, Howard A.; White, Thomas; Chapman, Henry N.

    2015-01-01

    In structural determination of crystalline proteins using intense femtosecond X-ray lasers, damage processes lead to loss of structural coherence during the exposure. We use a nonthermal description for the damage dynamics to calculate the ultrafast ionization and the subsequent atomic displacement. These effects degrade the Bragg diffraction on femtosecond time scales and gate the ultrafast imaging. This process is intensity and resolution dependent. At high intensities the signal is gated b...

  4. Pulse retiming based on XPM using parabolic pulses formed in a fiber Bragg grating

    OpenAIRE

    Parmigiani, F.; Petropoulos, P.; Ibsen, M.; Richardson, D.J.

    2006-01-01

    We experimentally demonstrate a novel all-optical all-fiberized pulse retiming scheme incorporating parabolic pulses generated in a linear fashion through pulse shaping in a superstructured fiber Bragg grating. The scheme relies on chirping the signal to be retimed using cross-phase modulation with the broader parabolic clock pulses, and subsequently retiming it through linear propagation in a dispersive medium. We demonstrate the cancellation of up to 4-ps root-mean-square timing jitter for ...

  5. Railway track component condition monitoring using optical fibre Bragg grating sensors

    International Nuclear Information System (INIS)

    The use of optical fibre Bragg grating (FBG) strain sensors to monitor the condition of safety critical rail components is investigated. Fishplates, switchblades and stretcher bars on the Stagecoach Supertram tramway in Sheffield in the UK have been instrumented with arrays of FBG sensors. The dynamic strain signatures induced by the passage of a tram over the instrumented components have been analysed to identify features indicative of changes in the condition of the components. (paper)

  6. Railway track component condition monitoring using optical fibre Bragg grating sensors

    Science.gov (United States)

    Buggy, S. J.; James, S. W.; Staines, S.; Carroll, R.; Kitson, P.; Farrington, D.; Drewett, L.; Jaiswal, J.; Tatam, R. P.

    2016-05-01

    The use of optical fibre Bragg grating (FBG) strain sensors to monitor the condition of safety critical rail components is investigated. Fishplates, switchblades and stretcher bars on the Stagecoach Supertram tramway in Sheffield in the UK have been instrumented with arrays of FBG sensors. The dynamic strain signatures induced by the passage of a tram over the instrumented components have been analysed to identify features indicative of changes in the condition of the components.

  7. 3D printed sensing patches with embedded polymer optical fibre Bragg gratings

    Science.gov (United States)

    Zubel, Michal G.; Sugden, Kate; Saez-Rodriguez, D.; Nielsen, K.; Bang, O.

    2016-05-01

    The first demonstration of a polymer optical fibre Bragg grating (POFBG) embedded in a 3-D printed structure is reported. Its cyclic strain performance and temperature characteristics are examined and discussed. The sensing patch has a repeatable strain sensitivity of 0.38 pm/μepsilon. Its temperature behaviour is unstable, with temperature sensitivity values varying between 30-40 pm/°C.

  8. Fiber Bragg Gratings, IT Techniques and Strain Gauge Validation for Strain Calculation on Aged Metal Specimens

    OpenAIRE

    Ander Montero; Idurre Saez de Ocariz; Ion Lopez; Pablo Venegas; Javier Gomez; Joseba Zubia

    2011-01-01

    This paper studies the feasibility of calculating strains in aged F114 steel specimens with Fiber Bragg Grating (FBG) sensors and infrared thermography (IT) techniques. Two specimens have been conditioned under extreme temperature and relative humidity conditions making comparative tests of stress before and after aging using different adhesives. Moreover, a comparison has been made with IT tecniques and conventional methods for calculating stresses in F114 steel. Implementation of Structural...

  9. Field Deployable Fiber Bragg Grating Strain Patch for Long-Term Stable Health Monitoring Applications

    OpenAIRE

    Gerhard Kalinka; Wolfgang Habel; Nadine Kusche; Vivien Schukar

    2013-01-01

    A fiber Bragg grating (FBG) strain patch specially adapted for long-term and high-strain applications has been developed and characterized. The design concept for the patch is based on a glass-fiber reinforced plastic (gfrp) carrier material. The developed concept for the FBG integration into the carrier material was derived from reliable integration procedure of FBG sensors into composite structures. The patches’ temperature sensitivity, strain gauge factor, fiber–matrix ...

  10. Focused radiation hepatitis after Bragg-peak proton therapy for hepatocellular carcinoma: CT findings

    International Nuclear Information System (INIS)

    Radiation hepatitis is clearly demonstrated by noncontrast and contrast enhanced CT following radiotherapy for liver diseases. Radiation hepatitis is dependent on dose distribution and is usually demonstrated as nonsegmental bandlike lesion after photon therapy. We report a case of focused, oval-shaped radiation hepatitis that was induced by photon therapy. The attenuation difference was localized in a high-dose area caused by Bragg-peak proton therapy. 17 refs., 2 figs

  11. Measuring residual stresses in metallic components manufactured with fibre Bragg gratings embedded by selective laser melting

    Science.gov (United States)

    Havermann, Dirk; Mathew, Jinesh; MacPherson, William N.; Hand, Duncan P.; Maier, Robert R. J.

    2015-09-01

    Metal clad single mode optical fibres containing Fibre Bragg Gratings are embedded in stainless steel components using bespoke laser based Selective Laser Melting technology (SLM). Significant residual stresses can be created in SLM manufactured components through the strong thermal gradients during the build process. We demonstrate the ability to monitor these internal stresses through embedded optical fibres with FBGs on a layer to layer basis, confirming estimates from models for residual stresses in additive manufactured components.

  12. Stabilization of semiconductor lasers by fiber Bragg gratings for absolute laser interferometry

    Czech Academy of Sciences Publication Activity Database

    Mikel, Břetislav; Helán, Radek; Číp, Ondřej

    Bellingham: SPIE, 2006, 61841Y:1-8. ISBN 0-8194-6240-3. ISSN 0277-786X. [Semiconductor Laser s and Laser Dynamics II. Strasbourg (FR), 03.04.2006-06.04.2006] R&D Projects: GA AV ČR KJB200650503 Institutional research plan: CEZ:AV0Z20650511 Keywords : fiber Bragg grating * laser interferometry Subject RIV: BH - Optics, Masers, Laser s

  13. A versatile, highly-efficient, high-resolution von Hamos Bragg crystal x-ray spectrometer

    International Nuclear Information System (INIS)

    An efficient, high-resolution, vertical-focusing, Bragg crystal x-ray spectrometer has been specifically designed and constructed for use in measurements of x rays produced in collisions of energetic heavy ions. In this report the design and resulting operational characteristics of the final instrument are fully described. A wide variety of sample data is also included to illustrate the utility of this device in several areas of research. 14 refs., 38 figs

  14. Smart material using fiber Bragg grating transducers and shape memory alloy actuators

    OpenAIRE

    Rodríguez Cobo, Luis; Quintela Incera, Antonio; Cobo García, Adolfo; López Higuera, José Miguel

    2012-01-01

    A structure based on a smart material and a PID control loop is presented in this paper. A glass fiber reinforced plastic material is instrumented with Fiber Bragg Gratings (FBG) and Shape Memory Alloy (SMA) actuators. The smart material and the smart structure are both successfully checked by being subjected to different operational conditions at the laboratory. Very good responses are obtained under both slow and quicker varying conditions.

  15. An experimental study of low-frequency amplitude noise in a fibre Bragg grating laser diode

    International Nuclear Information System (INIS)

    We have studied the amplitude noise in a fibre Bragg grating laser diode. It has been shown that discontinuities in noise characteristics correlate with those in the power – current and spectral characteristics of the laser diode, whereas the noise characteristics of the pump source have no such discontinuities. The highest noise level has been observed at pump currents corresponding to concurrent generation of two longitudinal modes. (lasers)

  16. Some Novel Bragg Diffraction Optics Elements for Neutron Scattering at Steady State Neutrons Sources

    Czech Academy of Sciences Publication Activity Database

    Mikula, Pavol; Lukáš, Petr; Šaroun, Jan; Vrána, Miroslav; Wagner, V.

    2001-01-01

    Roč. 70, - (2001), s. 477-479. ISSN 0031-9015. [Proceedings of the 1st International Symposium on Advanced Science Research (ASR-2000). Tokai, 31.10.2000-02.11.2000] R&D Projects: GA ČR GV202/97/K038; GA AV ČR IAA1048003 Keywords : bragg diffraction * neutron optics * bent crystals Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 1.628, year: 2001

  17. Preparation and characterization of Bragg fibers with air cores for transfer of laser radiation

    Czech Academy of Sciences Publication Activity Database

    Matějec, Vlastimil; Kašík, Ivan; Podrazký, Ondřej; Aubrecht, Jan; Frank, M.; Jelínek, M.; Kubeček, V.

    Vol. 8775. BELLINGHAM: SPIE-INT SOC OPTICAL ENGINEERING, 2013 - (Kalli, K.; Kanka, J.; Mendez, A.) ISBN 978-0-8194-9577-8. ISSN 0277-786X. [Conference on Micro-structured and Specialty Optical Fibres II. Prague (CZ), 15.04.2013-17.04.2013] R&D Projects: GA ČR GAP102/12/2361 Institutional support: RVO:67985882 Keywords : Bragg fiber * silica core * aser power delivery Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering

  18. Transmission of red-laser radiation by using Bragg fibers with air cores

    Czech Academy of Sciences Publication Activity Database

    Matějec, Vlastimil; Podrazký, Ondřej; Kašík, Ivan; Frank, M.; Jelínek, M.; Kubeček, V.

    Vol. 9507. Bellingham: SPIE, 2015 - (Kalli, K.; Kaňka, J.; Mendez, A.), 95070Q. (Proceedings of SPIE). ISBN 978-1-62841-628-2. ISSN 0277-786X. [Conference on Micro-Structured and Specialty Optical Fibres IV. Prague (CZ), 15.04.2015-16.04.2015] R&D Projects: GA ČR GAP102/12/2361 Institutional support: RVO:67985882 Keywords : Laser power delivery * MCVD method * Bragg fiber Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering

  19. Impact of hydrogen-induced effects on optical fiber Bragg gratings

    Science.gov (United States)

    Martelli, Cicero; Mendez, Alexis; Triques, Adriana L. C.; Braga, Arthur M. B.; Canning, John; Cook, Kevin; Llerena, Roberth; Takahashi, Victor

    2011-05-01

    The effects induced by low and high pressure ingression of hydrogen on UV-written germanium doped silica optical fiber Bragg gratings-at room and high temperature-are studied and discussed. Results show that at elevated temperatures (>150 °C), an immediate and permanent shift of the peak grating reflectivity is induced and proportional to the hydrogen concentration (10 pm/AtmH2), whilst at room temperature most of the grating spectrum changes are transient and mostly reversible.

  20. Kirkpatrick--Baez microprobe on the basis of two linear single crystal Bragg--Fresnel lenses

    International Nuclear Information System (INIS)

    X-ray microprobe on the basis of two linear single crystal phase Bragg--Fresnel lenses in Kirkpatrick--Baez geometry has been suggested and realized for hard x rays. The Kirkpatrick--Baez optics has been tested by two-dimensional imaging the x-ray source spot of a conventional sealed-off x-ray tube with Cu target (λ=1.54 A). The possibility of applying this kind of microprobe at a synchrotron radiation source is discussed

  1. X-ray imaging with off-axis Bragg Fresnel multilayer lenses

    OpenAIRE

    Mirone, A.; Idir, M.; Soullie, G.; Dhez, P.

    1994-01-01

    We analyse the possibilities of using a new kind of Bragg Fresnel Multilayer Lens that we have designed in order to improve image contrast[1]. We discuss the aberrations and the dynamical properties of this lens on the base of a recently developed dynamical theory[2] and of the data from the first imaging tests that we have performed. The principle of the optimal configuration for utilisation of these lenses is given.

  2. Plasmonic V-groove waveguides with Bragg grating filters via nanoimprint lithography

    DEFF Research Database (Denmark)

    Smith, Cameron L. C.; Desiatov, Boris; Goykmann, Ilya; Cuesta, Irene Fernandez; Levy, Uriel; Kristensen, Anders

    2012-01-01

    We demonstrate spectral filtering with state-of-the-art Bragg gratings in plasmonic V-groove waveguides fabricated by wafer scale processing based on nanoimprint lithography. Transmission spectra of the devices having 16 grating periods exhibit spectral rejection of the channel plasmon polaritons...... effective refractive index values calculated by finite element simulations in COMSOL. The results represent advancement towards the implementation of plasmonic V-grooves with greater functional complexity and mass-production compatibility....

  3. Compact fibre Bragg grating-based thermometer for on-line temperature monitoring of drill bits

    Science.gov (United States)

    Hey Tow, Kenny; Llera, Miguel; Le Floch, Sébastien; Salvadé, Yves; Thévenaz, Luc

    2016-05-01

    In this communication, a novel compact fibre Bragg grating-based thermometer for on-line temperature monitoring of drill bits is reported. Our proposed technique can potentially be used to optimize any drilling process, requiring the use of small drill bits, through direct temperature measurement at the drill bit instead of relying on indirect parameters (speed of rotation, applied force) in order to avoid an overheating as it is currently done nowadays.

  4. Microwave photonics filtering technique for interrogating long weak fiber Bragg grating sensors

    OpenAIRE

    Ricchiuti, Amelia Lavinia; Barrera, David; Sales, Salvador; Thévenaz, Luc; Capmany, José

    2014-01-01

    A system to interrogate photonic sensors based on long weak fiber Bragg gratings (FBGs) is presented and experimentally demonstrated, dedicated to measure the precise location of several spot events. The principle of operation is based on a technique used to analyze microwave photonics (MWP) filters. The long weak FBGs are used as quasi-distributed sensors. Several events can be detected along the FBG device with a spatial accuracy under 1 mm using a modulator and a photo-detector (PD) with a...

  5. Magneto-Optic Fiber Bragg Gratings with Application to High-Resolution Magnetic Field Sensors

    Institute of Scientific and Technical Information of China (English)

    Bao-Jian Wu; Ying Yang; Kun Qiu

    2008-01-01

    Magneto-optic fiber Bragg gratings (MFBG) based on magneto-optic materials have a lot of potential applications for sensing and optical signal processing. The transmission and reflection spectra of guided optical waves in the MFBG are investigated. According to the sensitivity of MFBG spectral lines to the magneto-optic coupling intensity varying with applied magnetic field, a novel magnetic field sensor of high-resolution up to 0.01 nm/(kA/m) is predicted.

  6. A Noncontact Force Sensor Based on a Fiber Bragg Grating and Its Application for Corrosion Measurement

    OpenAIRE

    Antonio C. Bruno; Clara J. Pacheco

    2013-01-01

    A simple noncontact force sensor based on an optical fiber Bragg grating attached to a small magnet has been proposed and built. The sensor measures the force between the magnet and any ferromagnetic material placed within a few millimeters of the sensor. Maintaining the sensor at a constant standoff distance, material loss due to corrosion increases the distance between the magnet and the corroded surface, which decreases the magnetic force. This will decrease the strain in the optical fiber...

  7. Structural monitoring system with fiber Bragg grating sensors: Implementation and software solution

    CERN Document Server

    Fedorov, Aleksey; Makhrov, Ilya; Pozhar, Nikolay; Anufriev, Maxim; Pnev, Alexey; Karasik, Valeriy

    2014-01-01

    We present a structural health monitoring system for nondestructive testing of composite materials based on the fiber Bragg grating sensors and specialized software solution. Developed structural monitoring system has potential applications for preliminary tests of novel composite materials as well as real-time structural health monitoring of industrial objects. The software solution realizes control for the system, data processing and alert of an operator.

  8. Sensitivity of contact-free fiber Bragg grating sensor to ultrasonic Lamb wave

    Science.gov (United States)

    Wee, Junghyun; Hackney, Drew; Peters, Kara; Wells, Brian; Bradford, Philip

    2016-04-01

    Networks of fiber Bragg grating (FBG) sensors can serve as structural health monitoring (SHM) systems for large-scale structures based on the collection of ultrasonic waves. The demodulation of structural Lamb waves requires a high signal-to-noise ratio because Lamb waves have a low amplitude. This paper investigates the signal transfer between Lamb waves propagating in an aluminum plate collected by an optical fiber containing a FBG. The fiber is bonded to the plate at locations away from the FBG. The Lamb waves are converted into longitudinal and flexural traveling waves propagating along the optical fiber, which are then transmitted to the Bragg grating. The signal wave amplitude is measured for different distances between the bond location and the Bragg grating. Bonding the optical fiber away from the FBG location and closer to the signal source produces a significant increase in signal amplitude, here measured to be 5.1 times that of bonding the Bragg grating itself. The arrival time of the different measured wave coupling paths are also calculated theoretically, verifying the source of the measured signals. The effect of the bond length to Lamb wavelength ratio is investigated, showing a peak response as the bond length is reduced compared to the wavelength. This study demonstrates that coupling Lamb waves into guided traveling waves in an optical fiber away from the FBG increases the signal-to-noise ratio of Lamb wave detection, as compared to direct transfer of the Lamb wave to the optical fiber at the location of the FBG.

  9. A Fiber Bragg Grating—Bimetal Temperature Sensor for Solar Panel Inverters

    OpenAIRE

    Mohd Afiq Ismail; Nizam Tamchek; Muhammad Rosdi Abu Hassan; Dambul, Katrina D.; Jeyraj Selvaraj; Nasrudin Abd Rahim; Seyed Reza Sandoghchi; Faisal Rafiq Mahamd Adikan

    2011-01-01

    This paper reports the design, characterization and implementation of a Fiber Bragg Grating (FBG)-based temperature sensor for an Insulted-Gate Bipolar Transistor (IGBT) in a solar panel inverter. The FBG is bonded to the higher Coefficient of Thermal Expansion (CTE) side of a bimetallic strip to increase its sensitivity. Characterization results show a linear relationship between increasing temperature and the wavelength shift. It is found that the sensitivity of the sensor can be categorize...

  10. Applications of superstructure fibre Bragg gratings for optical code division multiple access and packet switched networks

    OpenAIRE

    Teh, P.C.

    2003-01-01

    This thesis describes the research on the implementation of all-optical code generation and recognition based on superstructure fibre Bragg grating (SSFBG) for use in Optical Code Division Multiple Access (OCDMA) systems and also in high-speed all-optical packet switched networks.These results highlight the precision and flexibility of the continuous grating writing process and show that the SSFBG technology represents a promising technology not just for OCDMA but an extended range of other p...

  11. Low crosstalk Bragg grating/Mach-Zehnder interferometer optical add-drop multiplexer in silicon photonics.

    Science.gov (United States)

    Wang, Junjia; Chen, Lawrence R

    2015-10-01

    We characterize the interferometric crosstalk and system performance of two optical add-drop multiplexer (OADM) designs based on Bragg grating/Mach-Zehnder interferometers implemented in silicon-on-insulator. Both OADM designs exhibit low crosstalk and negligible crosstalk-induced power penalties over their 3 dB bandwidths. The devices are tolerant to wavelength drift and misalignment between the transmitter and OADM; moreover, their designs can be optimized further to enable high performance operation in WDM systems. PMID:26480158

  12. Channel Spectral Separation Narrowing for Spectral Beam Combining by Apodisation of the Reflecting Volume Bragg Grating

    OpenAIRE

    Shen Benjian; Tan Jichun; Guangwei Zheng; Yanlan He

    2011-01-01

    The sidelobe in diffraction efficiency of reflecting volume Bragg grating (RVBG) limits the wavelength channel spectral separation, which determines the combining power output in spectral beam combining (SBC) systems. A novel SBC system based on the apodised RVBG has been proposed to suppress the sidelobe. Several apodised RVBGs have been compared and the optimal apodised RVBG is obtained by using the chain-matrix approach. Numerical results show that the sidelobe could be suppressed excellen...

  13. Bragg Gratings Induced in Birefringent Optical Fiber with an Elliptical Stress Cladding

    Directory of Open Access Journals (Sweden)

    I. K. Meshkovskiy

    2013-01-01

    Full Text Available The paper presents the results of writing of type I and high-performance type II fiber Bragg gratings in birefringent optical fiber with an elliptical stress cladding by a single 20 ns pulse of KrF excimer laser (248 nm. The gratings’ efficiency produced by a single pulse was up to 100%. Experimental results on visualization of these gratings are presented.

  14. Three-hole microstructured optical fiber for efficient Fiber Bragg Grating refractometer

    OpenAIRE

    Phan Huy, Minh Châu; Laffont, Guillaume; Dewynter, Véronique; Ferdinand, Pierre; Roy, Philippe; Auguste, Jean-Louis; Pagnoux, Dominique; Blanc, Wilfried; Dussardier, Bernard

    2007-01-01

    International audience We present a photosensitive three-hole microstructured optical fiber specifically designed to improve the refractive index sensitivity of a standard Fiber Bragg Grating (FBG) sensor photowritten in the suspended Ge-doped silica core. We describe the specific photowriting procedure used to realize gratings in such a fiber. We then determine their spectral sensitivity to the refractive index changes of material filling the holes surrounding the core. The sensitivity is...

  15. Nonlinear Bloch modes, optical switching and Bragg solitons in tightly coupled micro-ring resonator chains

    International Nuclear Information System (INIS)

    We study nonlinear wave phenomena in coupled ring resonator optical waveguides in the tight coupling regime. A discrete model for the system dynamics is put forward and its steady-state nonlinear Bloch modes are derived. The switching behaviour of the transmission system is addressed numerically and the results are explained in the light of this analytical result. We also present a numerical study on the spontaneous generation of Bragg solitons from a continuous-wave input. (paper)

  16. A Laue-Bragg monolithic beam splitter for efficient X-ray 2-beam imaging

    Czech Academy of Sciences Publication Activity Database

    Oberta, Peter; Mokso, R.

    2013-01-01

    Roč. 703, MAR (2013), s. 59-63. ISSN 0168-9002 R&D Projects: GA MPO FR-TI1/412 Institutional research plan: CEZ:AV0Z10100522 Keywords : X-ray imaging * Laue-Bragg diffraction * monolithic crystal * dueal energy option Subject RIV: BH - Optics, Masers, Lasers Impact factor: 1.316, year: 2013 http://www.sciencedirect.com/science/article/pii/S0168900212013794

  17. Monitoring damage development in composite repairs using chirped fibre Bragg grating sensors.

    OpenAIRE

    Rito, Rodolfo N.L.

    2015-01-01

    Composite repairs are often used for damaged structures in order to recover the mechanical properties of the original structure. During service, there is the possibility that damage will occur in the repaired region and hence it would be useful to be able to monitor such repairs. This research investigates the use of chirped fibre Bragg grating (CFBG) sensors to monitor the development of fatigue damage initiation and growth in the repaired region of three different repair systems, i.e. glass...

  18. Theoretical methods for the calculation of Bragg curves and 3D distributions of proton beams

    OpenAIRE

    Ulmer, Waldemar; Matsinos, Evangelos

    2010-01-01

    The well-known Bragg-Kleeman rule RCSDA = A dot E0p has become a pioneer work in radiation physics of charged particles and is still a useful tool to estimate the range RCSDA of approximately monoenergetic protons with initial energy E0 in a homogeneous medium. The rule is based on the continuous-slowing-down-approximation (CSDA). It results from a generalized (nonrelativistic) Langevin equation and a modification of the phenomenological friction term. The complete integration of this equatio...

  19. Cell inactivation and induction of DNA double strand breaks by heavy ions near the bragg peak

    International Nuclear Information System (INIS)

    CHO-K1 cells were irradiated with protons and C, N, and O ions near the Bragg peak at the Medium Energy Beam (MEXP) Course. C, N, O ions were transported to MEXP course at 6 MeV/n and led into air, and then irradiated to the cells. Ion energy (or the LETs) was selected by changing the distance between the beam exit and the sample position. For protons, the ion energy was decreased to 4.3 MeV from 6 MeV by controlling linac accelerators. For measurement of cell inactivation, 4.3 MeV protons were decreased its energy by air as an absorber to 3.4, 2.6, and 2.0 and cell inactivation cross-section (σ) was higher with low energy protons. For N ion, the σ values were obtained at two different positions of Bragg curves, which showed lower σ at higher LET. These may be due to drastic thin down of ion track radius at near the Bragg peak. (author)

  20. Resonant Bragg quantum wells in hybrid photonic crystals: optical properties and applications

    Science.gov (United States)

    Schiumarini, D.; D'Andrea, A.; Tomassini, N.

    2016-03-01

    The exciton-polariton propagation in resonant hybrid periodic stacks of isotropic/anisotropic layers, with misaligned in-plane anisotropy and Bragg photon frequency in resonance with Wannier exciton of 2D quantum wells is studied by self-consistent theory and in the effective mass approximation. The optical tailoring of this new class of resonant Bragg reflectors, where the structural periodicity of a multi-layer drives the in-plane optical \\hat{C}-axis orientation, is computed for symmetric and asymmetric elementary cells by conserving strong radiation-matter coupling and photonic band-gaps. The optical response computation, on a finite cluster of N-asymmetric elementary cells, shows anomalous exciton-polariton propagation and absorbance properties strongly dependent on the incident wave polarizations. Finally, the behaviour of the so-called intermediate dispersion curves, close to the unperturbed exciton resonance, and located between upper and lower branches of the first band gap, is studied as a function of the in-plane \\hat{C}-axis orientation. This latter optical property is promising for storing exciton-polariton impulses in this kind of Bragg reflector.

  1. High Q-factor distributed bragg reflector resonators with reflectors of arbitrary thickness.

    Science.gov (United States)

    Le Floch, Jean-Michel; Tobar, Michael E; Cros, Dominique; Krupka, Jerzy

    2007-12-01

    The Bragg reflection technique improves the Q-factor of a resonator by reducing conductor and dielectric losses. This is achieved by designing a low-loss inner resonant region (usually free space) surrounded by an outer anti-resonant region made of distributed Bragg reflector layers. In this paper we develop a simple non-Maxwellian model and apply it to design three distinct cylindrical Bragg resonators based on the same set of single-crystal sapphire plates and rings by changing only the dimension of the cavity that supports the structure. To accomplish this, the simple model allows an arbitrary thickness for either the horizontal or the cylindrical dielectric reflectors by relaxing the condition that they must be lambda/4 thick. The model also allows for higher-order field variations in both the resonant and the anti-resonant regions. The resonators were constructed and experimental results were compared with the simple model and the rigorous method of lines analysis. For the fundamental mode, an unloaded Q-factor of 234,000 at 9.7 GHz was obtained. This is larger than that for a whispering gallery mode resonator. The resonator also exhibited a greatly reduced spurious mode density when compared to an overmoded whispering gallery mode resonator. PMID:18276575

  2. Stretching of Picosecond Laser Pulses with Uniform Reflecting Volume Bragg Gratings

    Science.gov (United States)

    Mokhov, Sergiy

    It is shown that a uniform reflecting volume Bragg grating (VBG) can be used as a compact monolithic stretcher of high-power picosecond laser pulses in cases when chirped Bragg gratings with an appropriate chirp rate are difficult to fabricate. A chirp-free reflected stretched pulse is generated of almost rectangular shape when incident short pulse propagates along a grating and experiences local Bragg diffraction. The increase in duration of the reflected pulse is approximately equal to twice the propagation times along the grating. We derived the analytic expression for diffraction efficiency, which incorporates incident pulse duration, grating thickness, and amplitude of refractive index modulation, enabling an optimum selection of the grating for pulse stretching. The typical expected theoretical value of diffraction efficiency is about 10% after taking into account the spectral narrowing of the reflected emission. We believe that the relatively low energy efficiency of the proposed method is more than offset by a number of advantages, which are chirp-free spectrum of a stretched pulse, compactness, robustness, preservation of setup alignment and beam quality, and tolerance to high power. Obtained pulses of several tens of picoseconds can be amplified by standard methods which are not requiring special measures to avoid undesirable non-linear effects. We propose a simple and reliable method to control the temporal parameters of the high-power picosecond pulses using the same laser source and the VGB of variable thickness that can significantly simplify the experiments requiring different pulse durations.

  3. Design of a Multicast Optical Packet Switch Based on Fiber Bragg Grating Technology for Future Networks

    Science.gov (United States)

    Cheng, Yuh-Jiuh; Yeh, Tzuoh-Chyau; Cheng, Shyr-Yuan

    2011-09-01

    In this paper, a non-blocking multicast optical packet switch based on fiber Bragg grating technology with optical output buffers is proposed. Only the header of optical packets is converted to electronic signals to control the fiber Bragg grating array of input ports and the packet payloads should be transparently destined to their output ports so that the proposed switch can reduce electronic interfaces as well as the bit rate. The modulation and the format of packet payloads may be non-standard where packet payloads could also include different wavelengths for increasing the volume of traffic. The advantage is obvious: the proposed switch could transport various types of traffic. An easily implemented architecture which can provide multicast services is also presented. An optical output buffer is designed to queue the packets if more than one incoming packet should reach to the same destination output port or including any waiting packets in optical output buffer that will be sent to the output port at a time slot. For preserving service-packet sequencing and fairness of routing sequence, a priority scheme and a round-robin algorithm are adopted at the optical output buffer. The fiber Bragg grating arrays for both input ports and output ports are designed for routing incoming packets using optical code division multiple access technology.

  4. Efficient interpretation algorithm for embedded Bragg gratings for damage detection in composites

    Science.gov (United States)

    Prabhugoud, Mohanraj; Peters, Kara J.

    2003-07-01

    The goal of a structural health monitoring system is to detect, locate, and identify damages in a structure during its lifetime. The concept of structural health monitoring is particularly important for fiber reinforced composites due to the complexity of the possible failure mechanisms. The goal of this work is to simulate the response of optical fiber Bragg grating sensors to multi-component loading for their implementation in structural health monitoring algorithms for composites. A simulation method is presented to determine the effects of axial, bending and shear loading on an embedded optical fiber Bragg grating sensor. The effect of fiber bending on the Bragg grating sensor is experimentally verified by embedding the sensor in a solid cone, clamped at the base and subjected to a point load at the apex. Next, a numerically efficient method to calculate the response of sensors embedded in a unidirectional composite is developed using both finite element analysis and optimal shear-lag theory and taking into account the above effects. The limitations of the optimal shear-lag theory are derived through comparison with the finite element results. The application of this method is demonstrated through a numerical example, simulating the response of sensors embedded in one fiber layer to a transverse crack.

  5. Extraction of polychromatic thermal neutrons by Bragg diffraction to use for prompt gamma neutron activation analysis

    International Nuclear Information System (INIS)

    Extraction method of thermal neutron beam by Bragg diffraction is investigated. A thermal neutron beam is used for the Prompt Gamma Neutron Activation Analysis system at HANARO, a 30 MW research reactor in the Korea Atomic Energy Research Institute. Polychromatic beam including all orders of diffraction is obtained by setting a pair of pyrolytic graphite crystals with a Bragg angle of 45 deg. on a horizontal white beam line. Diffracted neutron flux at the sample position is calculated by considering the integrated reflectivity and mosaic spread of crystals. Due to the divergence effect, the mosaic spread of crystals is optimized to give the maximum and flat flux at the sample position. An experiment has been performed to verify the reflectivities for high order diffractions from pyrolytic graphite. When the focusing technique of bending the crystals is adopted, a design value of 1.0x108 n/cm2s is expected at the sample position. Hence Bragg diffraction is a promising method of extracting thermal neutrons for PGNAA

  6. Single-pulse coherent anti-Stokes Raman spectroscopy via fiber Bragg grating

    Science.gov (United States)

    Oh, Seung Ryeol; Park, Joo Hyun; Kwon, Won Sik; Kim, Jin Hwan; Kim, Kyung-Soo; Lee, Jae Yong; Kim, Soohyun

    2016-03-01

    Fiber Bragg grating is used in a variety of applications. In this study, we suggest compact, cost-effective coherent anti- Stokes Raman spectroscopy which is based on the pulse shaping methods via commercialized fiber Bragg grating. The experiment is performed incorporating a commercialized femtosecond pulse laser system (MICRA, Coherent) with a 100 mm length of 780-HP fiber which is inscribed 50 mm of Bragg grating. The pump laser for coherent anti-Stokes Raman spectroscopy has a bandwidth of 90 nm and central wavelength of 815 nm with a notch shaped at 785 nm. The positive chirped pulse is compensated by chirped mirror set. We compensate almost 14000 fs2 of positive group delay dispersion for the transform-limited pulse at the sample position. The pulse duration was 15 fs with average power of 50 mW, and showed an adequate notch shape. Finally, coherent anti-Stokes Raman signals are observed using a spectrometer (Jobin Yvon Triax320 and TE-cooled Andor Newton EMCCD). We obtained coherent anti-Stokes Raman signal of acetone sample which have Raman peak at the spectral finger-print region. In conclusion, the proposed method is more simple and cost-effective than the methods of previous research which use grating pairs and resonant photonic crystal slab. Furthermore, the proposed method can be used as endoscope application.

  7. CO2 sensing at room temperature using carbon nanotubes coated core fiber Bragg grating

    Science.gov (United States)

    Shivananju, B. N.; Yamdagni, S.; Fazuldeen, R.; Sarin Kumar, A. K.; Hegde, G. M.; Varma, M. M.; Asokan, S.

    2013-06-01

    The sensing of carbon dioxide (CO2) at room temperature, which has potential applications in environmental monitoring, healthcare, mining, biotechnology, food industry, etc., is a challenge for the scientific community due to the relative inertness of CO2. Here, we propose a novel gas sensor based on clad-etched Fiber Bragg Grating (FBG) with polyallylamine-amino-carbon nanotube coated on the surface of the core for detecting the concentrations of CO2 gas at room temperature, in ppm levels over a wide range (1000 ppm-4000 ppm). The limit of detection observed in polyallylamine-amino-carbon nanotube coated core-FBG has been found to be about 75 ppm. In this approach, when CO2 gas molecules interact with the polyallylamine-amino-carbon nanotube coated FBG, the effective refractive index of the fiber core changes, resulting in a shift in Bragg wavelength. The experimental data show a linear response of Bragg wavelength shift for increase in concentration of CO2 gas. Besides being reproducible and repeatable, the technique is fast, compact, and highly sensitive.

  8. Blood pressure manometer using a twin Bragg grating Fabry-Perot interferometer

    Science.gov (United States)

    van Brakel, Adriaan; Swart, Pieter L.; Chtcherbakov, Anatoli A.; Shlyagin, Mikhail G.

    2005-02-01

    We propose the use of optical fiber Bragg gratings in a non-invasive blood pressure waveform monitor. Bragg gratings can be written in a Fabry-Perot interferometric configuration to yield a method of strain measurement that has both a high resolution and a wide unambiguous range. This fiber Bragg grating Fabry-Perot interferometer (FBGI) can be used as a sensor to detect strain resulting from blood pressure applied to the walls of an artery situated near the patient"s skin. Strain measurements taken on the skin surface, typically over the radial artery at the wrist, are encoded as phase shifts of the FBGI signal. These phase shifts may be obtained by the analytic representation of the interferometer signal in the wavelength domain or by Fourier analysis in the frequency domain. For the proof of concept a realistic physical model was constructed to simulate pressure conditions at the actual sensor location. The operation of the device is demonstrated by measurements of pressure-pulse waveforms obtained in real-time. This sensor was also successfully tested on human patients, and these results are also presented. Since it yields continuous readings of blood pressure non-invasively, further application of the optical manometer may yield an alternative to conventional sphygmomanometry.

  9. Sensitivity Enhancement of Strain Sensing Utilizing a Differential Pair of Fiber Bragg Gratings

    Directory of Open Access Journals (Sweden)

    Ping Wang

    2012-03-01

    Full Text Available In strain measurement applications, the matched fiber Bragg gratings (FBG method is generally used to reduce temperature dependence effects. The FBG parameters have to be designed to meet the requirements by the particular application. The bandwidth and slope of the FBG has to be balanced well, according to the measurement range, accuracy and sensitivity. A sensitivity enhanced strain demodulation method without sacrificing the measurement range for FBG sensing systems is proposed and demonstrated utilizing a pair of reference FBGs. One of the reference FBGs and the sensing FBG have almost the same Bragg wavelength, while the other reference FBGs has a Bragg wavelength offset relative to the sensing FBG. Reflected optical signals from the sensing FBG pass through two reference FBGs, and subtract from each other after the detection. Doubled strain measurement sensitivity is obtained by static rail load experiments compared to the general matched grating approach, and further verified in dynamic load experiments. Experimental results indicate that such a method could be used for real-time rail strain monitoring applications.

  10. Plasmonic Fano interference produced by gold nano-disks on a dielectric Bragg stack

    Science.gov (United States)

    Hajebifard, Akram; Berini, Pierre

    2015-09-01

    Fano interference is predicted in a structure consisting of a periodic array of uncoupled gold nano-disks (AuNDs) supported by a Bragg stack. The phenomenon occurs due to resonant interference between the reflection spectrum of the Bragg stack and localized surface plasmon resonances (LSPRs) on the AuNDs. Fitting the computational results to the Fano lineshape formula yields the Fano parameters of the resonances including their linewidth. One of the most important advantages of the structure is that the linewidth of the Fano resonances (˜9 nm) is much narrower than the bandwidth of the LSPR nano-disks (˜80 nm) and the reflection bandwidth of the Bragg stack on which the disks are supported (˜100 nm). The narrow Fano linewidth and the ease with which they can be interrogated using perpendicularly incident light makes the structure attractive for biosensing applications. The bulk sensitivities and figure of merit of Fano resonances in a proposed design are 44 nm/RIU (redshift) and -52 nm/RIU (blueshift), and ˜4 RIU-1, respectively.

  11. Extraction of polychromatic thermal neutrons by Bragg diffraction to use for prompt gamma neutron activation analysis

    Science.gov (United States)

    Byun, S. H.; Choi, H. D.; Jun, B. J.; Kim, M. S.

    2000-07-01

    Extraction method of thermal neutron beam by Bragg diffraction is investigated. A thermal neutron beam is used for the Prompt Gamma Neutron Activation Analysis system at HANARO, a 30 MW research reactor in the Korea Atomic Energy Research Institute. Polychromatic beam including all orders of diffraction is obtained by setting a pair of pyrolytic graphite crystals with a Bragg angle of 45° on a horizontal white beam line. Diffracted neutron flux at the sample position is calculated by considering the integrated reflectivity and mosaic spread of crystals. Due to the divergence effect, the mosaic spread of crystals is optimized to give the maximum and flat flux at the sample position. An experiment has been performed to verify the reflectivities for high order diffractions from pyrolytic graphite. When the focusing technique of bending the crystals is adopted, a design value of 1.0×108n/cm2s is expected at the sample position. Hence Bragg diffraction is a promising method of extracting thermal neutrons for PGNAA.

  12. Fault zone hydrogeology

    Science.gov (United States)

    Bense, V. F.; Gleeson, T.; Loveless, S. E.; Bour, O.; Scibek, J.

    2013-12-01

    Deformation along faults in the shallow crust (evaluation of the impact of faults to fluid flow patterns remains a challenge and requires a multidisciplinary research effort of structural geologists and hydrogeologists. However, we find that these disciplines often use different methods with little interaction between them. In this review, we document the current multi-disciplinary understanding of fault zone hydrogeology. We discuss surface- and subsurface observations from diverse rock types from unlithified and lithified clastic sediments through to carbonate, crystalline, and volcanic rocks. For each rock type, we evaluate geological deformation mechanisms, hydrogeologic observations and conceptual models of fault zone hydrogeology. Outcrop observations indicate that fault zones commonly have a permeability structure suggesting they should act as complex conduit-barrier systems in which along-fault flow is encouraged and across-fault flow is impeded. Hydrogeological observations of fault zones reported in the literature show a broad qualitative agreement with outcrop-based conceptual models of fault zone hydrogeology. Nevertheless, the specific impact of a particular fault permeability structure on fault zone hydrogeology can only be assessed when the hydrogeological context of the fault zone is considered and not from outcrop observations alone. To gain a more integrated, comprehensive understanding of fault zone hydrogeology, we foresee numerous synergistic opportunities and challenges for the discipline of structural geology and hydrogeology to co-evolve and address remaining challenges by co-locating study areas, sharing approaches and fusing data, developing conceptual models from hydrogeologic data, numerical modeling, and training interdisciplinary scientists.

  13. Effect of interstitial air holes on Bragg gratings in photonic crystal fibre with a Ge-doped core

    Institute of Scientific and Technical Information of China (English)

    Zhang Hui-Jia; Li Shu-Guang; Hou Lan-Tian

    2009-01-01

    The effect of interstitial air holes on Bragg gratings in photonic crystal fibre (PCF) with a Ge-doped core is numerically investigated by using thc beam propagation method (BPM). It is shown that the interstitial air holes (IAHs) can make Bragg resonance wavelength λ3 shift a little towards short wavelengths and incrcase λB - λ1 (the wavelength spacing between the main peak with Bragg resonance wavelength λB and the first side peak with wavelength λ1) and the coupling coefficient κ of Bragg resonance. Moreover, when the ratio of air hole diameter (d) to pitch (A),d/A, is small, IAHs can suppress the cladding mode resonance. When d/A is large, IAHs increase the number of mode that could strongly interact with the fundamental mode. By comparing the transmission spectral characteristics of PCF-based fibrc Bragg grating (FBG) with IAHs with those without IAtIs at the same air-filling fraction, it is clarified that the change of transmission spectral characteristics of PCF-based FBG with IAHs is not due to a simple change in air-filling fraction. It is also closely related to the distribution of interstitial air holes.

  14. Phase zone photon sieve

    Institute of Scientific and Technical Information of China (English)

    Jia Jia; Xie Chang-Qing

    2009-01-01

    A novel diffractive optical element, named phase zone photon sieve (PZPS), is presented. There are three kinds of phase plates in PZPSs: PZPS1, PZPS2, and PZPS3. Each of the PZPSs has its own structure and is made on quartz substrate by etching. The three PZPSs have stronger diffraction peak intensity than a photon sieve (PS) when the margin pinhole and zone line width are kept the same. The PZPS3 can produce a smaller central diffractive spot than the ordinary PS with the same number of zones on the Fresnel zone plate. We have given the design method for and the simulation of PZPS and PS. PZPS has potential applications in optical maskless lithography.

  15. BLM Solar Energy Zones

    Data.gov (United States)

    Bureau of Land Management, Department of the Interior — Priority development areas for utility-scale solar energy facilities as identified in the Solar PEIS Record of Decision. An additional Solar Energy Zone identified...

  16. Phase zone photon sieve

    International Nuclear Information System (INIS)

    A novel diffractive optical element, named phase zone photon sieve (PZPS), is presented. There are three kinds of phase plates in PZPSs: PZPS1, PZPS2, and PZPS3. Each of the PZPSs has its own structure and is made on quartz substrate by etching. The three PZPSs have stronger diffraction peak intensity than a photon sieve (PS) when the margin pinhole and zone line width are kept the same. The PZPS3 can produce a smaller central diffractive spot than the ordinary PS with the same number of zones on the Fresnel zone plate. We have given the design method for and the simulation of PZPS and PS. PZPS has potential applications in optical maskless lithography. (classical areas of phenomenology)

  17. : Seizure onset zone imaging

    OpenAIRE

    David, Olivier; Blauwblomme, Thomas; Job, Anne-Sophie; Chabardès, Stéphan; Hoffmann, Dominique,; Minotti, Lorella; Kahane, Philippe

    2011-01-01

    International audience Stereo-electroencephalography is used to localize the seizure onset zone and connected neuronal networks in surgical candidates suffering from intractable focal epilepsy. The concept of an epileptogenicity index has been proposed recently to represent the likelihood of various regions being part of the seizure onset zone. It quantifies low-voltage fast activity, the electrophysiological signature of seizure onset usually assessed visually by neurologists. Here, we re...

  18. Numerical analysis of the harmonic components of the Bragg wavelength content in spectral responses of apodized fiber Bragg gratings written by means of a phase mask with a variable phase step height.

    Science.gov (United States)

    Osuch, Tomasz

    2016-02-01

    The influence of the complex interference patterns created by a phase mask with variable diffraction efficiency in apodized fiber Bragg grating (FBGs) formation on their reflectance spectra is studied. The effect of the significant contributions of the zeroth and higher (m>±1) diffraction orders on the Bragg wavelength peak and its harmonic components is analyzed numerically. The results obtained for Gaussian and tanh apodization profiles are compared with similar data calculated for a uniform grating. It is demonstrated that when an apodized FBG is written using a phase mask with variable diffraction efficiency, significant enhancement of the harmonic components and a reduction of the Bragg wavelength peak in the grating spectral response are observed. This is particularly noticeable for the Gaussian apodization profile due to the substantial contributions of phase mask sections with relatively small phase steps in the FBG formation. PMID:26831768

  19. Tunable light filtering by a Bragg mirror/heavily doped semiconducting nanocrystal composite

    Directory of Open Access Journals (Sweden)

    Ilka Kriegel

    2015-01-01

    Full Text Available Tunable light filters are critical components for many optical applications in which light in-coupling, out-coupling or rejection is crucial, such as lasing, sensing, photovoltaics and information and communication technology. For this purpose, Bragg mirrors (band-pass filters with high reflectivity represent good candidates. However, their optical characteristics are determined during the fabrication stage. Heavily doped semiconductor nanocrystals (NCs, on the other hand, deliver a high degree of optical tunability through the active modulation of their carrier density, ultimately influencing their plasmonic absorption properties. Here, we propose the design of an actively tunable light filter composed of a Bragg mirror and a layer of plasmonic semiconductor NCs. We demonstrate that the filtering properties of the coupled device can be tuned to cover a wide range of frequencies from the visible to the near infrared (vis–NIR spectral region when employing varying carrier densities. As the tunable component, we implemented a dispersion of copper selenide (Cu2−xSe NCs and a film of indium tin oxide (ITO NCs, which are known to show optical tunablility with chemical or electrochemical treatments. We utilized the Mie theory to describe the carrier-dependent plasmonic properties of the Cu2−x Se NC dispersion and the effective medium theory to describe the optical characteristics of the ITO film. The transmission properties of the Bragg mirror have been modelled with the transfer matrix method. We foresee ease of experimental realization of the coupled device, where filtering modulation is achieved upon chemical and electrochemical post-fabrication treatment of the heavily doped semiconductor NC component, eventually resulting in tunable transmission properties of the coupled device.

  20. Stability of gap solitons in dual-core Bragg gratings with cubic-quintic nonlinearity

    International Nuclear Information System (INIS)

    We investigate the existence and stability of quiescent gap solitons in a system of two linearly coupled Bragg gratings with cubic-quintic nonlinearity. It is found that the model supports two disjoint families of solitons that fill the entire bandgap. There exist symmetric and asymmetric solitons in each family. Exact analytical solutions of symmetric solitons for both families are found. The stability of solitons is investigated by means of systematic numerical stability analysis. The effect of quintic nonlinearity and coupling coefficient on the stability of solitons and the stability regions are analyzed. (letter)

  1. Emulation of Fabry-Perot and Bragg resonators with temporal optical solitons.

    Science.gov (United States)

    Voytova, T; Oreshnikov, I; Yulin, A V; Driben, R

    2016-06-01

    The scattering of weak dispersive waves (DWs) on several equally spaced temporal solitons is studied. It is shown by systematic numerical simulations that the reflection of the DWs from the soliton trains strongly depends on the distance between the solitons. The dependence of the reflection and transmission coefficients on the inter-soliton distance and the frequency of the incident waves are studied in detail, revealing fascinating quasi-periodic behavior. The analogy between the observed nonlinear phenomena in the temporal domain and the usual Fabry-Perot and Bragg resonators is discussed. PMID:27244384

  2. Room temperature continuous wave operation of single-mode, edge-emitting photonic crystal Bragg lasers

    OpenAIRE

    Zhu, Lin; Sun, Xiankai; DeRose, Guy A.; Scherer, Axel; Yariv, Amnon

    2008-01-01

    We report the first room temperature CW operation of two dimensional single-mode edge-emitting photonic crystal Bragg lasers. Single-mode lasing with single-lobed, diffraction limited far-fields is obtained for 100μm wide and 550μm long on-chip devices. We also demonstrate the tuning of the lasing wavelength by changing the transverse lattice constant of the photonic crystal. This enables a fine wavelength tuning sensitivity (change of the lasing wavelength/change of the lattice constant) of ...

  3. Design and Realization of Uniform Fiber Bragg Grating Used in Dense Wavelength Division Multiplexing Systems

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Relation of optical properties in a uniform fiber Bragg grating(FBG) with its grating parameters and the laser beam engraving conditions is analyzed. The principle and method for designing the uniform FBG used in dense wavelength division multiplexing(DWDM) system is given. By adopting the double exposure technique, with a uniform phase mask and Gaussian laser beam, the uniform FBG used in DWDM system is designed and engraved, whose bandwidth of the main reflection band is about 0.4nm and 0.7nm at -5dB and -25dB respectively.

  4. New design for temperature–strain discrimination using fiber Bragg gratings embedded in laminated composites

    International Nuclear Information System (INIS)

    A new smart structure based on fiber Bragg gratings (FBGs) embedded into composite laminates for temperature and strain simultaneous measurement has been designed and experimentally tested. Two holes have been drilled at preset locations in the composite plate to create different strain sensitivities at different locations. The proposed design has been compared to three reference sensing heads also based on embedding FBGs into composite materials. Experimental results agree remarkably well with mechanical simulations and validate all the tested designs for the temperature–strain discrimination. Based on the same principle, another sensing head with a long single FBG embedded has also been designed and experimentally tested, obtaining temperature independent strain measurement. (paper)

  5. Design of a Pressure Sensor Based on Optical Fiber Bragg Grating Lateral Deformation

    Directory of Open Access Journals (Sweden)

    Jaroslav Kadlec

    2010-12-01

    Full Text Available This paper describes steps involved in the design and realization of a new type of pressure sensor based on the optical fiber Bragg grating. A traditional pressure sensor has very limited usage in heavy industrial environments, particularly in explosive or electromagnetically noisy environments. Utilization of optics in these environments eliminates all surrounding influences. An initial motivation for our development was the research, experimental validation, and realization of a complex smart pressure sensor based on the optical principle. The main benefit of this solution consists of increasing sensitivity, resistance to electromagnetic interference, dimensions, and potential increased accuracy.

  6. Thinned fibre Bragg grating as a fuel adulteration sensor: simulation and experimental study

    Science.gov (United States)

    Agarwal, S.; Prajapati, Y. K.; Mishra, V.

    2015-12-01

    This paper presents the implementation of a thinned fibre Bragg grating as a fuel adulteration sensor for volatile organic compounds. The proposed sensor can detect upto 10% adulteration of benzene, toluene and xylene: hydrocarbons precisely, whereas traditional methods can detect only upto 20% adulteration. The results obtained from the experiments are verified using Finite Difference Time Domain method. It is found that experimental results have very less deviation from simulation results. The proposed sensor provides us with the new possibility that may have commercial application, as well.

  7. Rovibrational hybrid fs/ps CARS using a volume Bragg grating for N₂ thermometry.

    Science.gov (United States)

    Scherman, M; Nafa, M; Schmid, T; Godard, A; Bresson, A; Attal-Tretout, B; Joubert, P

    2016-02-01

    Coherent anti-Stokes Raman scattering (CARS) spectra of N2 in the hybrid femtosecond/picosecond regime have been recorded with 0.7  cm(-1) resolution. The Q-branch rovibrational structure has been resolved, making it suitable for gas-phase simultaneous rotational and vibrational thermometry applications. Resolving this spectral structure requires synchronization of a narrowband picosecond probe pulse with a broadband femtosecond pair of pump and Stokes pulses. It is achieved using a single femtosecond ytterbium-laser source and a volume Bragg grating in a compact experimental arrangement. PMID:26907404

  8. Discovery of Bragg confined hybrid modes with high Q-factor in a hollow dielectric resonator

    CERN Document Server

    Floch, Jean-Michel le; Mouneyrac, David; Cros, Dominique; Krupka, Jerzy

    2007-01-01

    The authors report on observation of Bragg confined mode in a hollow cylindrical dielectric cavity. A resonance was observed at 13.4 $GHz$ with an unloaded Q-factor of order $2\\times10^5$, which is more than a factor of 6 above the dielectric loss limit. Previously such modes have only been realized from pure Transverse Electric modes with no azimuthal variations and only the $E_{\\phi}$ component. From rigorous numeric simulations it is shown that the mode is a hybrid mode with non-zero azimuthal variations and with dominant $E_r$ and $E_{\\phi}$ electric field components and $H_z$ magnetic field component.

  9. Discovery of Bragg confined hybrid modes with high Q factor in a hollow dielectric resonator

    Science.gov (United States)

    le Floch, Jean-Michel; Tobar, Michael E.; Mouneyrac, David; Cros, Dominique; Krupka, Jerzy

    2007-10-01

    The authors report on observation of Bragg confined mode in a hollow cylindrical dielectric cavity. A resonance was observed at 13.4GHz with an unloaded Q factor of order 2×105, which is more than a factor of 6 above the dielectric loss limit. Previously, such modes have only been realized from pure transverse electric modes with no azimuthal variations and only the Eϕ component. From rigorous numeric simulations, it is shown that the mode is a hybrid mode with nonzero azimuthal variations and with dominant Er and Eϕ electric field components and Hz magnetic field component.

  10. High-Q X-band distributed Bragg resonator utilizing an aperiodic alumina plate arrangement.

    Science.gov (United States)

    Bale, Simon; Everard, Jeremy

    2010-01-01

    This paper describes a high-Q X-band distributed Bragg resonator that uses an aperiodic arrangement of non-lambda/4 low loss alumina plates mounted in a cylindrical waveguide. An ABCD parameter waveguide model was developed to simulate and optimize the cavity. The dielectric plates and air waveguide dimensions were optimized to achieve maximum quality factor by redistributing the energy loss within the cavity. An unloaded quality factor (Q(0)) of 196,000 was demonstrated at 9.93 GHz. PMID:20040428

  11. Birefringence properties of a polarization maintaining Panda fibre during Bragg grating regeneration

    Science.gov (United States)

    Polz, Leonhard; Jarsen, Andreas; Bartelt, Hartmut; Roths, Johannes

    2015-09-01

    Regeneration of fibre Bragg gratings under application of a high temperature annealing process in a high birefringent polarisation maintaining fibre of type Panda was investigated. During the annealing process, a distinct nonlinearity and hysteresis of the birefringence with temperature was observed. After the temperature process, the birefringence between slow and fast axis at room temperature was nearly doubled, which is in agreement with observations of other researchers. The hysteresis in birefringence might be explained by the crossing of the transition temperature of the stress applying parts and the relief of in-frozen mechanical and thermal stresses.

  12. Quasi-distributed fiber Bragg grating temperature sensors for stator bars monitoring of large electric generators

    Science.gov (United States)

    Dreyer, Uilian J.; da Silva, Erlon V.; Biffe Di Renzo, André; Martelli, Cicero; Cardozo da Silva, Jean Carlos

    2016-05-01

    This work presents the application of a sensor based on quasi-distributed Fiber Bragg Gratings to monitor stator bars temperature of large electric generators. The applied FBG packaging method follows industrial standard procedures, and resulted in a robust and reliable sensing method, facilitating the future installation in the power plant. Experimental results are acquired in laboratory using the expected range of temperature values in the real machine. The measurement errors in the recorded results are within the calculated uncertainties and the time constant is shorter than what is obtained with conventional RTD for the same application.

  13. A flexible, highly sensitive catheter for high resolution manometry based on in-fibre Bragg gratings

    International Nuclear Information System (INIS)

    This work presents a fibre optic-based flexible catheter for high resolution manometry (HRM), with sensing pods located at a pitch of 10 mm and an overall diameter of 2.8 mm. In-fibre Bragg gratings act as the sensing elements within these sensing pods. Hydrodynamic pressure resolution of 0.2 mmHg is demonstrated in conjunction with insensitivity to occlusion pressure. This result is significant in the context of HRM where independent measurement of hydrodynamic pressure is clinically relevant. The sensing system is compact, robust and flexible. Crosstalk between individual sensors is characterized and a compensation scheme is developed and validated. (paper)

  14. Double optical bistability and its application in nonlinear chalcogenide-fiber Bragg gratings

    International Nuclear Information System (INIS)

    We study the continuous wave (CW) nonlinear transmission characteristics of chalcogenide-fiber Bragg gratings (c-FBGs). The set of Cubic quintic septic nonlinear coupled mode equations (CQSNLCMEs) is derived analytically to govern nonlinear wave propagation in c-FBGs by counting until seventh-order nonlinearity in chalcogenide glass. Double-optical bistability is observed in the CW nonlinear transmission characteristics of π phase-shifted c-FBG. Based on unstable state principle in the hysteresis, all-optical transistor operation is shown as a prominent application of optical bistability in such device

  15. Bragg grating induced cladding mode coupling due to asymmetrical index modulation in depressed cladding fibers

    DEFF Research Database (Denmark)

    Berendt, Martin Ole; Grüne-Nielsen, Lars; Soccolich, C.F.; Bjarklev, Anders Overgaard

    reduce this problem. None of these designs seems to give complete solutions. In particular, the otherwise promising depressed cladding design gives a pronounced coupling to one LP01 mode, this has been referred to as a Ghost grating. To find the modes of the fiber we have established a numerical mode......-solver based on the staircase-approximation method. The Bragg grating causes coupling between the fundamental LP01 mode and higher order LP1p modes that satisfy phase-matching. The coupling strength is determined by the overlap integral of the LP01, the LP1p mode, and the UV-induced index perturbation. For LP0...

  16. Fiber Bragg grating sensors for steel wire monitoring in real-time

    Science.gov (United States)

    Koch, Jan; Angelmahr, Martin; Schade, Wolfgang

    2014-05-01

    Steel wires are widely applied in industrial applications - in most cases as critical components fulfilling high safety requirements in harsh environments (e.g. dockside cranes). In this paper a technique for real-time monitoring of steel ropes applying optical strain sensors based on fiber Bragg gratings is presented. The optical sensors are integrated within the wire strand and replace the core. The strain transmission from the outer wires to the sensors is assured by the mechanical coupling between the optical fiber and the strand. The actual strain load and rope vibrations in the kilohertz range can be determined in real-time.

  17. Flat-Cladding Fiber Bragg Grating Sensors for Large Strain Amplitude Fatigue Tests

    OpenAIRE

    Xijia Gu; Cheng Li; Aihen Feng; Daolun Chen

    2010-01-01

    We have successfully developed a flat-cladding fiber Bragg grating sensor for large cyclic strain amplitude tests of up to ±8,000 με. The increased contact area between the flat-cladding fiber and substrate, together with the application of a new bonding process, has significantly increased the bonding strength. In the push-pull fatigue tests of an aluminum alloy, the plastic strain amplitudes measured by three optical fiber sensors differ only by 0.43% at a cyclic strain amplitude of ±7,000 ...

  18. Tunable Mesoporous Bragg Reflectors Based on Block-Copolymer Self-Assembly

    KAUST Repository

    Guldin, Stefan

    2011-07-06

    Mesoporous Bragg reflectors are a promising materials platform for photovoltaics, light emission, and sensing. A fast and versatile fabrication route that relies on the self-assembly of the block copolymer poly(isoprene-b-ethylene oxide) in combination with simple sol-gel chemistry is reported. The method allows extended control over porosity and pore size in the resulting inorganic material and results in high-quality optical elements. © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. A new-type photocathode for polarized electron source with distributed bragg reflector

    International Nuclear Information System (INIS)

    In order to increase the quantum efficiency of the strained GaAs photocathode for the highly polarized electron source, we designed a new type photocathode with a distributed Bragg reflector(DBR). A Fabry-Perot cavity is formed by the DBR and the GaAs surface. The large enhancement of quantum efficiency was observed at the laser wavelength which satisfied the condition for the resonant absorption of incident laser light. From this experiment, it becomes promising to make the photocathode which has the quantum efficiency more than ∼1% together with the electron spin polarization higher than 80%. (author)

  20. Remote fiber optic switch powered by light for robust interrogation of fiber Bragg grating sensor networks

    International Nuclear Information System (INIS)

    In this work, a remote fiber optic switch powered by light is demonstrated experimentally. This fiber optic switch is powered by a photovoltaic power converter illuminated by a Raman laser. The switch can operate at distances up to 100 km. This switch is used to develop a remote resilient fiber Bragg grating (FBG) multiplexing network interrogated by a commercial FBG interrogator. In the proposed set-up the switch selects the branch of the FBG network located 50 km away from the interrogation unit in order to enable a two-way interrogation path for each sensor to prevent connection failures or fiber breakages. (paper)

  1. Fiber Bragg Grating Sensor as Valuable Technological Platform for New Generation of Superconducting Magnets

    CERN Document Server

    Chiuchiolo, A; Cusano, A; Bajko, M; Perez, J C; Bajas, H; Viret, P; Giordano, M; Breglio, G

    2014-01-01

    New generation of superconducting magnets for high energy applications designed, manufactured and tested at the European Organization for Nuclear Research (CERN) require the implementation of reliable sensors able to monitor the mechanical stresses affecting the winding from fabrication to operation in magnetic field of 13 T. This work deals with the embedding of Fiber Bragg Grating sensors in a short model Nb3Sn dipole magnet in order to monitor the strain developed in the coil during the cool down to 1.9 K, the powering up to 15.8 kA and the warm up, offering perspectives for the replacement of standard strain gauges.

  2. PMMA mPOF Bragg gratings written in less than 10 min

    DEFF Research Database (Denmark)

    Bundalo, Ivan-Lazar; Nielsen, Kristian; Markos, Christos;

    2014-01-01

    Fiber Bragg grating (FBG) writing in PMMA microstructured Polymer Optical Fibers (mPOFs) using the UV Phase Mask technique is a time consuming process requiring about 40 minutes to inscribe a grating in an undoped fiber. Here we demonstrate the FBG inscription with the writing times shorter than 10...... min. By careful alligning and increasing the beam intensity in the core of the fiber, writing times as short as 6 minutes and 50 second were achieved. The FBGs were written in a 125 μm PMMA mPOF having 3-rings of holes, the reflection peaks were centred at 632.6 nm and have a reflectivity as high as...

  3. All-fiber amplifier similariton laser based on a fiber Bragg grating filter.

    Science.gov (United States)

    Olivier, Michel; Gagnon, Mathieu; Duval, Simon; Bernier, Martin; Piché, Michel

    2015-12-01

    This article presents, for the first time to our knowledge, an all-fiber amplifier similariton laser based on a fiber Bragg grating filter. The laser emits 2.9 nJ pulses at a wavelength of 1554 nm with a repetition rate of 31 MHz. The dechirped pulses have a duration of 89 fs. The characteristic features of the pulse profile and spectrum along with the dynamics of the laser are highlighted in representative simulations. These simulations also address the effect of the filter shape and detuning with respect to the gain spectral peak. PMID:26625073

  4. Conical Correlations, Bragg Peaks, and Transverse Flow Deflections in Jet Tomography

    OpenAIRE

    Betz, Barbara; Noronha, Jorge; Torrieri, Giorgio; Gyulassy, Miklos; Rischke, Dirk H.

    2009-01-01

    We use (3+1)-dimensional ideal hydrodynamics to describe a variety of different jet energy loss scenarios for a jet propagating through an opaque medium. The conical correlations obtained for fully stopped jets, revealing a Bragg peak, are discussed as well as results from pQCD and AdS/CFT. Moreover, we investigate transverse flow deflection. It is demonstrated that a double-peaked away-side structure can be formed due to the different contributions of several possible jet trajectories throug...

  5. Conical Correlations, Bragg Peaks, and Transverse Flow Deflections in Jet Tomography

    CERN Document Server

    Betz, Barbara; Torrieri, Giorgio; Gyulassy, Miklos; Rischke, Dirk H

    2009-01-01

    We use (3+1)-dimensional ideal hydrodynamics to describe a variety of different jet energy loss scenarios for a jet propagating through an opaque medium. The conical correlations obtained for fully stopped jets, revealing a Bragg peak, are discussed as well as results from pQCD and AdS/CFT. Moreover, we investigate transverse flow deflection. It is demonstrated that a double-peaked away-side structure can be formed due to the different contributions of several possible jet trajectories through an expanding medium.

  6. X-ray Raman scattering with Bragg diffraction in a La-based superlattice

    OpenAIRE

    André, Jean-Michel; Jonnard, Philippe; Bonnelle, Christiane; O. Filatova, E.; Michaelsen, C.; Wiesmann, J

    2005-01-01

    11 pages The non-dispersed soft x-ray emission from a La/B4C periodic multilayer irradiated by monochromatic x-rays has been measured as a function of the incident photon energy in the 125-200 eV range for different scattering angles. We have observed a scattered intensity peak at incident energies which shift towards the low-energy side as the value of the scattering angle increases. These observations are interpreted as Raman scattering by the 5p level of lanthanum assisted by Bragg diff...

  7. Bragg grating writing in PMMA microstructured polymer optical fibers in less than 7 minutes

    DEFF Research Database (Denmark)

    Bundalo, Ivan-Lazar; Nielsen, Kristian; Markos, Christos;

    2014-01-01

    We demonstrate fiber Bragg grating (FBG) writing in PMMA microstructured Polymer Optical Fibers (mPOFs) using UV Phase Mask technique with writing times shorter than 10 min. The shortest writing time was 6 minutes and 50 seconds and the longest writing time was 8 min and 50 sec. The FBGs were...... written in a 125 x00B5;m PMMA mPOF having 3-rings of holes, the reflection peaks were centred at 632.6 nm and have a reflectivity as high as 26 dB. We also demonstrate how the writing dynamics depends on the intensity of the writing beam....

  8. Application of Fiber Bragg Grating for Determining Positions of Gas Absorption Lines

    Institute of Scientific and Technical Information of China (English)

    韩文念; 汪曣; 马凤; 刘琨; 贾大功; 刘铁根; 张红霞

    2010-01-01

    Fiber Bragg grating(FBG) is used as a wavelength reference device to calibrate the position of gas absorption peak in the intracavity absorption gas sensor(ICAGS) based on erbium-doped fiberring laser.This system can detect both the reflectance spectrum of FBGs and absorption spectrum of measured gas during a single wavelength sweeping process by linearly varying the driving voltage of optic filter.The voltages corresponding to center wavelength positions of four FBGs in the spectrum are determined through ...

  9. Gamma radiation-induced blue shift of resonance peaks of Bragg gratings in pure silica fibres

    Science.gov (United States)

    Faustov, A. V.; Gusarov, A. I.; Mégret, P.; Wuilpart, M.; Kinet, D.; Zhukov, A. V.; Novikov, S. G.; Svetukhin, V. V.; Fotiadi, A. A.

    2016-02-01

    We report the first observation of a significant gamma radiation-induced blue shift of the reflection/transmission peak of fibre Bragg gratings inscribed into pure-silica core fibres via multiphoton absorption of femtosecond pulses. At a total dose of ~100 kGy, the shift is ~20 pm. The observed effect is attributable to the ionising radiation-induced decrease in the density of the silica glass when the rate of colour centre formation is slow. We present results of experimental measurements that provide the key parameters of the dynamics of the gratings for remote dosimetry and temperature sensing.

  10. Experimental and theoretical analysis of fiber Bragg gratings under Transverse Force to a Small Grating Section

    Institute of Scientific and Technical Information of China (English)

    WU Fei; LI Li-xin; LI Ya-pin; LI Zhi-quan

    2005-01-01

    Fiber Bragg grating under transverse force on a small grating section is studied by numerical simulation and experimentation. A numerical simulation based on the transfer matrix method is used to calculate the consequent changes in reflected spectrum. The reflected spectra of the FBG subjected to the transverse force split into two main peaks, and the split point shifted linearly and periodically versus the applied force. The split point is shifted in the bandwidth with the period of 11N, and the sensitivity of the split point wavelength shift versus the applied force is 0.05 nm/N in one period. The experimental results show good agreement with the simulation analysis.

  11. Comparison of Bragg-Edge neutron-transmission spectroscopy at ISIS and LANSCE

    CERN Document Server

    Santisteban, J R; Priesmeyer, H G; Vogel, S

    2002-01-01

    The Bragg edges appearing in the neutron-transmission spectra of a polycrystalline material represent its coherent-scattering response at 2 theta=180 . Structural information such as texture, phase content or strain may be derived from the intensity and position of these edges. Transmission diffractometers have been recently developed at both LANSCE and ISIS and used for studying the dynamics of phase transformations and strain imaging, respectively. The incident neutron spectra vary due to the different neutron moderators and flight paths used in the two instruments. This paper reports a comparative study of the two instruments and their analysis software. (orig.)

  12. Additive non-uniform random sampling in superimposed fiber Bragg grating strain gauge

    International Nuclear Information System (INIS)

    This paper demonstrates an additive non-uniform random sampling and interrogation method for dynamic and/or static strain gauge using a reflection spectrum from two superimposed fiber Bragg gratings (FBGs). The superimposed FBGs are designed to generate non-equidistant space of a sensing pulse train in the time domain during dynamic strain gauge. By combining centroid finding with smooth filtering methods, both the interrogation speed and accuracy are improved. A 1.9 kHz dynamic strain is measured by generating an additive non-uniform randomly distributed 2 kHz optical sensing pulse train from a mean 500 Hz triangular periodically changing scanning frequency. (paper)

  13. Dynamic strain detection using a fiber Bragg grating sensor array for geotechnical applications

    Science.gov (United States)

    Schmidt-Hattenberger, Cornelia; Naumann, M.; Borm, Gunter

    2003-03-01

    In recent years fiber Bragg gratings have been successfully introduced as sensors for strain, temperature and pressure variations. Their performance and reliability has been proven in many practical applications including strain monitoring in civil engineering and tunneling, downhole monitoring in oil reservoirs and flow assurance monitoring in pipelines. The gratings have great potential to at as true structurally integrated sensor elements. They can be embedded in typical structural or reinforcing elements of civil and geotechnical buildings. Several methods of interrogation schemes are established depending on the desired accuracy and resolution of the measurement. The most important methods are the linear discriminator, the tunable Fbry-Perot filter technique, and several interferometer setups.

  14. Superradiant amplification of terahertz radiation by plasmons in inverted graphene with a planar distributed Bragg resonator

    Energy Technology Data Exchange (ETDEWEB)

    Polischuk, O. V., E-mail: polischuk.sfire@mail.ru; Popov, V. V., E-mail: popov-slava@yahoo.co.uk [Russian Academy of Sciences, Saratov Branch, Kotel’nikov Institute of Radioengineering and Electronics (Russian Federation); Otsuji, T. [Tohoku University, Research Institute for Electrical Communication (Japan)

    2015-11-15

    It is shown theoretically that stimulated generation of terahertz radiation by plasmons in graphene with a planar distributed Bragg resonator is possible at two different frequencies for each plasmon mode. This behavior may be attributed to the superradiance of the collective plasmon mode, which is associated with superlinear increase in the radiative damping of the plasmons with increase in pumping power. As a result, the curves of the radiative damping and the plasmon gain as a function of the pumping power intersect at two points corresponding to different generation conditions.

  15. A high sensitive fiber Bragg grating(FBG) geophone detecting system

    Science.gov (United States)

    Wang, Jin-Yu; Qi, Hai-Feng; Song, Guang-Dong; Wang, Chang; Liu, Tong-Yu

    2012-02-01

    A high sensitive fiber Bragg grating (FBG) geophone detecting system based on narrow line width distributed feedback (DFB) laser is realized by using filtering demodulation. Sensitivity of FBG geophone lies on the structure of the sensor shell and the shape of the reflectivity spectrum of FBG. Experiments on the detecting system's frequency character have been done. Results show that this geophone can detect the smallest acceleration of 1mm/s2 with a flat response from 5Hz to 40Hz.. The experiments on coal mine exhibit that the geophone can be used to measure microseismic signals. The detecting system shows great prospect in micro-seismic detection, and geological disasters detecting.

  16. Wavelength switchable graphene Q-switched fiber laser with cascaded fiber Bragg gratings

    Science.gov (United States)

    Wu, Man; Chen, Shuqing; Chen, Yu; Li, Ying

    2016-06-01

    We have demonstrated a wavelength switchable graphene Q-switched fiber laser with two cascaded fiber Bragg gratings. Stable Q-switching operation with central wavelength 1542.9 nm (1543.7 nm), repetition rate 28.4 kHz (22.58 kHz), and pulse duration 2.16 μs (2.65 μs) can be obtained by adjusting the intra-cavity birefringence. Moreover, stable dual-wavelength operation with wavelength spacing 0.8 nm can also be observed. The cascaded fiber gratings combined with the graphene saturable absorber provide a simple and feasible way to get versatile pulsed fiber laser.

  17. Emulation of Fabry–Perot and Bragg resonators with temporal optical solitons

    Science.gov (United States)

    Voytova, T.; Oreshnikov, I.; Yulin, A. V.; Driben, R.

    2016-06-01

    The scattering of weak dispersive waves (DW) on several equally spaced temporal solitons is studied. It is shown by systematic numerical simulations that the reflection of the DWs from the soliton trains strongly depends on the distance between the solitons. The dependence of the reflection and transmission coefficients on the inter-soliton distance and the frequency of the incident waves is studied in detail, revealing fascinating quasi-periodic behavior. The analogy between the observed nonlinear phenomena in temporal domain and usual Fabry-Perot and Bragg resonators is discussed.

  18. Acoustic excitation of the circular Bragg endash Fresnel lens in backscattering geometry

    International Nuclear Information System (INIS)

    An increment of the x-ray flux in crystal Bragg endash Fresnel lens (BFL) focus in backscattering geometry obtained by means of acoustic excitation of the BFL crystal substrate has been investigated. The dependence of the x ray close-quote s total reflected power versus ultrasound parameters has been studied in a low frequency range (10 endash 50 MHz). The proposed technique allows an increase in the flux in a BFL focus by a factor of 2 which almost achieves the kinematic limit. copyright 1997 American Institute of Physics

  19. Long fiber Bragg grating sensor interrogation using discrete-time microwave photonic filtering techniques.

    Science.gov (United States)

    Ricchiuti, Amelia Lavinia; Barrera, David; Sales, Salvador; Thevenaz, Luc; Capmany, José

    2013-11-18

    A novel technique for interrogating photonic sensors based on long fiber Bragg gratings (FBGs) is presented and experimentally demonstrated, dedicated to detect the presence and the precise location of several spot events. The principle of operation is based on a technique used to analyze microwave photonics (MWP) filters. The long FBGs are used as quasi-distributed sensors. Several hot-spots can be detected along the FBG with a spatial accuracy under 0.5 mm using a modulator and a photo-detector (PD) with a modest bandwidth of less than 1 GHz. The proposed interrogation system is intrinsically robust against environmental changes. PMID:24514329

  20. Tunable Microwave Photonic Notch Filter Based on a high-birefringence linearly chirped fiber Bragg grating

    International Nuclear Information System (INIS)

    In this paper, a continuously tunable microwave photonic notch filter is proposed and experimentally demonstrated. This filter is based on the differential group delay generated by a high-birefringence linearly chirped fiber Bragg grating. This microwave photonic filter belongs to the orthogonal polarization approach, polarization maintaining structure ensures the filter free from the random optical interference problem. Its response is induced by the differential group delay (DGD) of the Hi-Bi LCFBG and it can be varied by tuning the grating through adding gradient strength to the grating. Free spectral range tuning by 9.27 GHz with more than 35 dB notch rejection is achieved.