WorldWideScience

Sample records for borosilicate application aux

  1. 3 and 4 oxidation state element solubilities in borosilicate glasses. Implement to actinides in nuclear glasses; Solubilite des elements aux degres d'oxydation (3) et (4) dans les verres de borosilicate. Application aux actinides dans les verres nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    Cachia, J.N

    2005-12-15

    In order to ensure optimal radionuclides containment, the knowledge of the actinide loading limits in nuclear waste glasses and also the comprehension of the solubilization mechanisms of these elements are essential. A first part of this manuscript deals with the study of the differences in solubility of the tri and tetravalent elements (actinides and surrogates) particularly in function of the melting temperature. The results obtained indicate that trivalent elements (La, Gd, Nd, Am, Cm) exhibit a higher solubility than tetravalent elements (Hf, Th, Pu). Consequently, it was planned to reduce plutonium at the oxidation state (III), the later being essentially tetravalent in borosilicate glasses. An innovating reduction process of multi-valent elements (cerium, plutonium) using silicon nitride has been developed in a second part of this work. Reduced plutonium-bearing glasses synthesized by Si{sub 3}N{sub 4} addition made it possible to double the plutonium solubility from 2 to 4 wt% at 1200 deg C. A structural approach to investigate the differences between tri and tetravalent elements was finally undertaken. These investigations were carried out by X-rays Absorption Spectroscopy (EXAFS) and NMR. Trivalent rare earth and actinide elements seem to behave as network modifiers while tetravalent elements rather present true intermediaries' behaviour. (author)

  2. Iron-borosilicate soft magnetic composites: The correlation between processing parameters and magnetic properties for high frequency applications

    Energy Technology Data Exchange (ETDEWEB)

    Gheiratmand, T., E-mail: t.gheiratmand@yahoo.com; Madaah Hosseini, H.R., E-mail: Madaah@sharif.edu; Seyed Reihani, S.M.

    2017-05-01

    Iron-borosilicate soft magnetic composites are suitable magnetic materials for high temperature and high frequency applications. In this research two different techniques have been applied to fabricate these composites: uniaxial pressing following by sintering and spark plasma sintering. Different processing parameters including the content of borosilicate, the amount of compaction pressure and the size of iron particles have been evaluated through the study of microstructure and magnetic properties. The microstructural observations showed that the borosilicate is distributed on the iron grain boundaries enhancing the resistivity and causing the loss of eddy currents. Increasing the compaction pressure was led to the decrease of electrical resistivity. By increasing the frequency both real and imaginary parts of permeability decreased. The use of higher content of borosilicate resulted in the lower decreasing slop of permeability. Best combination of density, permeability and electrical resistivity was obtained in the sample with 2 wt% of borosilicate. In addition, the densification of powders with fine particles was more difficult than coarse particles due to the inter particles friction and bridging effects. Furthermore, as the particles size increases the size of open porosities before sintering where the borosilicate could aggregate enhances. This could yields to the increase in the electrical resistivity. The high ratio of surface to the volume in the powders with fine particles results in the developing the demagnetizing fields and subsequently, decreasing the permeability. The highest relative density (99.99% of theoretical density) with best distribution of borosilicate was achieved in the composites produced by spark plasma sintering (SPS). The relaxation frequency, obtained from imaginary part of permeability, was found as 340 Hz in the composites made by SPS. - Highlights: • Iron-borosilicate SMC was produced for high temperature and frequency

  3. Luminescence properties of Dy3+ doped lithium zinc borosilicate glasses for photonic applications

    Directory of Open Access Journals (Sweden)

    N. Jaidass

    2018-03-01

    Full Text Available Different concentrations of Dy3+ ions doped lithium zinc borosilicate glasses of chemical composition (30-x B2O3 - 25 SiO2 -10 Al2O3 -30 LiF - 5 ZnO - x Dy2O3 (x = 0, 0.1, 0.5, 1.0 and 2.0 mol% were prepared by the melt quenching technique. The prepared glasses were investigated through X-ray diffraction, optical absorption, photoluminescence and decay measurements. Intensities of absorption bands expressed in terms of oscillator strengths (f were used to determine the Judd-Ofelt (J-O intensity parameters Ωλ (λ = 2, 4 and 6. The evaluated J-O parameters were used to determine the radiative parameters such as transition probabilities (AR, total transition probability rate (AT, radiative lifetime (τR and branching ratios (βR for the excited 4F9/2 level of Dy3+ ions. The chromaticity coordinates determined from the emission spectra were found to be located in the white light region of CIE chromaticity diagram. Keywords: Condensed matter physics, Engineering, Materials science

  4. Topological Principles of Borosilicate Glass Chemistry

    DEFF Research Database (Denmark)

    Smedskjær, Morten Mattrup; Mauro, J. C.; Youngman, R. E.

    2011-01-01

    and laboratory glassware to high-tech applications such as liquid crystal displays. In this paper, we investigate the topological principles of borosilicate glass chemistry covering the extremes from pure borate to pure silicate end members. Based on NMR measurements, we present a two-state statistical...

  5. Application of solar chargers to prospection instruments; Application des chargeurs solaires aux appareils de prospection

    Energy Technology Data Exchange (ETDEWEB)

    Caille, G [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    The use of conventional batteries has certain disadvantages, and for this reason high-voltage batteries have been gradually replaced in all prospection instruments by transistor supply systems, using less cumbersome sources of energy. All the same low voltages are still necessary, and in hot or damp countries the use of these batteries leads to consumptions out of all proportion to the services rendered. This is why the use of solar energy possesses real advantages. After a brief review of the basic ideas on semiconductors, this article describes a selenium solar battery which was developed by the Westinghouse brakes and signals society. (author) [French] L'utilisation de piles classiques presente certains inconvenients. C'est pourquoi, dans tous les appareils de prospection, les piles fournissant des tensions elevees ont ete remplacees au fur et a mesure par des alimentations a base de transistors, utilisant des sources d'energie moins encombrantes. Toutefois, il faut tout de meme avoir des tensions faibles et l'utilisation de ces piles entraine dans les pays chauds ou humides une consommation disproportionnee par rapport aux services rendus. C'est pourquoi l'emploi de l'energie solaire presente de reels avantages. Cet expose decrit, apres un rappel de notion de base sur les semi-conducteurs, une batterie solaire a base de selenium qui a ete realisee par la Societe des freins et signaux Westinghouse. (auteur)

  6. Determination of the free enthalpies of formation of borosilicate glasses; Determination des enthalpies libres de formation des verres borosilicates. Application a l'etude de l'alteration des verres de confinement de dechets radioactifs

    Energy Technology Data Exchange (ETDEWEB)

    Linard, Y

    2000-07-01

    This work contributes to the study of the thermochemical properties of nuclear waste glasses. Results are used to discuss mechanisms and parameters integrated in alteration models of conditioning materials. Glass is a disordered material defined thermodynamically as a non-equilibrium state. Taking into account one order parameter to characterise its configurational state, the metastable equilibrium for the glass was considered and the main thermochemical properties were determined. Calorimetric techniques were used to measure heat capacities and formation enthalpies of borosilicate glasses (from 3 to 8 constitutive oxides). Formation Entropies were measured too, using the entropy theory of relaxation processes proposed by Adam and Gibbs (1965). The configurational entropy contribution were determined from viscosity measurements. This set of data has allowed the calculation of Gibb's free energies of dissolution of glasses in pure water. By comparison with leaching experiments, it has been demonstrated that the decreasing of the dissolution rate at high reaction progress cannot be associated to the approach of an equilibrium between the sound glass and the aqueous solution. The composition changes of the reaction area at the glass surface need to be considered too. To achieve a complete description of the thermodynamic stability, the equilibrium between hydrated de-alkalinized glass and/or the gel layer with the aqueous solution should also be evaluated. (author)

  7. 10 Détermination des radionucléides dans le repas. Application aux ...

    African Journals Online (AJOL)

    ASIMANANA

    On réalise du tic au tac à l'Agriculture et un système expert des aides aux culinaires. Le Malgache a un art culinaire. Les étrangers, certes, connaissent seulement quelques plats. Malgaches à commencer par le Romazava et le Ravitoto. Or, on constatera que cette cuisine compte de nombreux plats. 2. Matériel et méthodes.

  8. Methodes spectrales paralleles et applications aux simulations de couches de melange compressibles

    OpenAIRE

    Male , Jean-Michel; Fezoui , Loula ,

    1993-01-01

    La resolution des equations de Navier-Stokes en methodes spectrales pour des ecoulements compressibles peut etre assez gourmande en temps de calcul. On etudie donc ici la parallelisation d'un tel algorithme et son implantation sur une machine massivement parallele, la connection-machine CM-2. La methode spectrale s'adapte bien aux exigences du parallelisme massif, mais l'un des outils de base de cette methode, la transformee de Fourier rapide (lorsqu'elle doit etre appliquee sur les deux dime...

  9. Linear thermal expansion coefficient (at temperatures from 130 to 800 K) of borosilicate glasses applicable for coupling with silicon in microelectronics

    OpenAIRE

    Sinev, Leonid S.; Petrov, Ivan D.

    2017-01-01

    Processing results of measurements of linear thermal expansion coefficients and linear thermal expansion of two brands of borosilicate glasses --- LK5 and Borofloat 33 --- are presented. The linear thermal expansion of glass samples have been determined in the temperature range 130 to 800 K (minus 143 to 526 $\\deg$C) using thermomechanical analyzer TMA7100. Relative imprecision of indirectly measured linear thermal expansion coefficients and linear thermal expansion of both glass brands is le...

  10. Application of the New Decommissioning Regulation to the Nuclear Licensed Facilities (NLF) at Fontenay-aux-Roses's Nuclear Center (CEA)

    International Nuclear Information System (INIS)

    Sauret, Josiane; Piketty, Laurence; Jeanjacques, Michel

    2008-01-01

    This abstract describes the application of the new decommissioning regulation on all Nuclear Licensed Facilities (NLF is to say INB in French) at Fontenay-aux-Roses's Center (CEA/FAR). The decommissioning process has been applied in six buildings which are out of the new nuclear perimeter proposed (buildings no 7, no 40, no 94, no 39, no 52/1 and no 32) and three buildings have been reorganized (no 54, no 91 and no 53 instead of no 40 and no 94) in order to increase the space for temporary nuclear waste disposal and to reduce the internal transports of nuclear waste on the site. The advantages are the safety and radioprotection improvements and a lower operating cost. A global safety file was written in 2002 and 2003 and was sent to the French Nuclear Authority on November 2003. The list of documents required is given in the paragraph I of this paper. The main goals were two ministerial decrees (one decree for each NLF) getting the authorization to modify the NLF perimeter and to carry out cleaning and dismantling activities leading to the whole decommissioning of all NLF. Some specific authorizations were necessary to carry out the dismantling program during the decommissioning procedure. They were delivered by the French Nuclear Safety Authority (FNSA) or with limited delegation by the General Executive Director (GED) on the CEA Fontenay-aux-Roses's Center, called internal authorization. Some partial dismantling or decontamination examples are given below: - evaporator for the radioactive liquid waste treatment station (building no 53): FNSA authorization: phase realised in 2002/2003. - disposal tanks for the radioactive liquid waste treatment station (building no 53) FNSA authorization: phase realised in 2004, - incinerator for the radioactive solid waste treatment station (building no 07): FNSA authorization: operation realised in 2004, - research equipments in the building no. 54 and building no. 91: internal authorization ; realised in 2005, - sample

  11. Small angle scattering from soft matter-application to complex mixed systems; Diffusion de neutrons aux petits angles par la matiere molle-application aux systemes mixtes

    Energy Technology Data Exchange (ETDEWEB)

    Boue, F.; Cousin, F.; Gummel, J.; Carrot, G.; El Harrak, A. [CEA Saclay, Lab. Leon Brillouin, CNRS, 91 - Gif-sur-Yvette (France); Oberdisse, J. [Montpellier-2 Univ., Lab. des Colloides, Verres et Nanomateriaux, UMR 5587, 34 (France)

    2007-09-15

    The advantage of small angle neutron scattering associated with isotopic labelling through deuteration is illustrated in the case of mixed systems, created by associating already well-known systems of characteristic structures; this is also important for applications. Our first mixed system associates charged polymer chains, polyelectrolyte (here polystyrene sulfonate, PSS), with oppositely charged particles, proteins (here lysozyme). Different fractions of deuterated water (D{sub 2}O) mixed with normal water are used to match the scattering length density of the protein or of the polymer in non-deuterated or deuterated version. First, this allows us to separate the protein and the polymer signal: we can then distinguish a case where the structures of each species alone in water are hardly modified by mixing, except for interconnections yielding a gel, and a case inducing complete change into a structure common to both species, made of aggregated globules. Secondly, using, for counter-ions of the poly-ions, deuterated Tetramethylammonium, together with matching both protein and polymer, we establish unambiguously the counter-ion release into the solvent. Thirdly, matching only a fraction of polymer chains, the other being deuterated, we extrapolate at zero deuterated fraction their form factor and describe the chain conformation inside the complexes. Fourthly, we illustrate the possibilities of modelling the signal on a second example of mixed system: a nano-composite made of silica particles surrounded by polymer dispersed into a deuterated polymer matrix. Chains are then visible in such reinforced polymer system, in particular when it is submitted to elongation: we discuss a possible model for an ideal system, introducing the scattering contribution from deformed chains. (authors)

  12. Application du groupe de renormalisation aux conducteurs organiques quasi-unidimensionnels soumis a un champ magnetique

    Science.gov (United States)

    Hubert, Laurent

    Des conducteurs organiques fortement anisotropes presentent, sous l'effet d'un champ magnetique, une etonnante variete de proprietes physiques tel que: l'effet Shubnikov-de Haas, l'effet de Haas-van-Alphen, l'existence de cascades d'ondes de densite de spin apparentees a l'effet Hall quantique, reentrance vers la phase metallique pouvant provenir d'un 'breakdown' magnetique, et tout recemment la possibilite d'un confinement charge induit par le champ magnetique. A cela s'ajoute les nombreuses caracteristiques deja apparues en variant la pression hydrostatique ou la substitution chimique: separation spin-charge, localisation de la charge, transition spin-Peierls, antiferromagnetisme itinerant ou non, supraconductivite, et l'existence d'une frontiere commune entre les phases supraconductrice et antiferromagnetique. En vue de completer la description theorique du diagramme de phase generalise des conducteurs organiques, nous adaptons et elargissons la methode du groupe de renormalisation quantique (GRQ) au cas ou le champ magnetique est non nul. On sait deja que cette methode permet de resoudre le dilemme tout particulier des composes Q-1D, soit leur capacite de produire des transitions de phase malgre leur forte anisotropie et consequemment de leur faible dimensionalite. Cette methode est deja utilisee pour decrire le diagramme de phase temperature versus pression des sels de Bechgaard, de leurs analogues souffres et mixtes. Le GRQ permet aussi de comprendre comment des systemes anisotropes comme les conducteurs organiques peuvent se comporter comme des liquides de Luttinger a haute temperature et comme des liquides de Fermi ou condenses a basse temperature. Nous montrons que l'introduction d'un champ magnetique dans un regime de saut coherent interchai ne a deux particules n'apporte que de simples corrections aux lois d'echelles dans le canal zero son, alors qu'il introduit un mecanisme de brisure de paire dans le canal Cooper. Dans le regime de saut coherent a une

  13. The borosilicate glass for 'PAMELA'

    International Nuclear Information System (INIS)

    Schiewer, E.

    1986-01-01

    The low enriched waste concentrate (LEWC) stored at Mol, Belgium, will be solidified in the vitrification plant 'PAMELA'. An alkali-borosilicate glass was developed by the Hahn-Meitner-Institut, Berlin, which dissolves (11 +- 3)wt% waste oxides while providing sufficient flexibility for changes in the process parameters. The development of the glass labelled SM513LW11 is described. Important properties of the glass melt (viscosity, resistivity, formation of yellow phase) and of the glass (corrosion in aqueous solutions, crystallization) are reported. The corrosion data of this glass are similar to those of other HLW-glasses. Less than five wt% of crystalline material are produced upon cooling of large glass blocks. Crystallization does not affect the chemical durability. (Auth.)

  14. Dynamique jointe stock/option et application aux stratégies de trading sur options

    OpenAIRE

    El Aoud , Sofiene

    2015-01-01

    This thesis explores theoretically and empirically the implications of the stock/option joint dynamics on applications related to option trading. In the first part of the thesis, we look into the relations between stock options and index options under the risk-neutral measure. The Capital Asset Pricing Model offers an adequate mathematical framework for this study as it provides a modeling approach for the joint dynamics between the stock and the index. As we compute option prices according t...

  15. Introduction - Acid decomposition of borosilicate ores

    International Nuclear Information System (INIS)

    Mirsaidov, U.M.; Kurbonov, A.S.; Mamatov, E.D.

    2015-01-01

    The complex processing of mineral raw materials is an effective way for the extraction of valuable components. One of these raw materials are borosilicate ores from which the boric acid, aluminium and iron salts and building materials can be obtained. In the Institute of Chemistry of the Academy of Sciences of the Republic of Tajikistan the flowsheets of the processing of borosilicate raw materials by acid and chloric methods were elaborated. The acid methods of decomposition of borosilicate ores of Ak-Arkhar Deposit were considered in present monograph. The carried out researches on elaboration of physicochemical aspects and technological acid methods allowed to define the optimal ways of extraction of valuable products from borosilicate raw materials of Tajikistan.

  16. A novel low cost polyvinyl alcohol-Nafion-borosilicate membrane separator for microbial fuel cell

    Energy Technology Data Exchange (ETDEWEB)

    Tiwari, B.R. [Department of Civil Engineering, Indian Institute of Technology, Kharagpur, 721302 (India); Noori, Md.T. [Department of Agriculture and Food Engineering, Indian Institute of Technology, Kharagpur, 721302 (India); Ghangrekar, M.M., E-mail: ghangrekar@civil.iitkgp.ernet.in [Department of Civil Engineering, Indian Institute of Technology, Kharagpur, 721302 (India)

    2016-10-01

    Composite membranes were developed from PVA-borosilicate (MP) and PVA-Nafion-borosilicate (MPN) for application in microbial fuel cells (MFCs). The membranes were characterized in terms of water uptake, PBS uptake, oxygen diffusion and proton conductivity. Proton conductivity for MPN (0.07 Scm{sup −1}) was found to be higher as compared to that of MP (0.03 Scm{sup −1}). Oxygen diffusion coefficient for MPN was 1.47 fold lower than that for MP. As a result, MFC with PVA-Nafion-borosilicate membrane exhibited maximum power density of 6.8 Wm{sup −3}, which was 151% higher than the power produced by MFC having PVA-borosilicate membrane and it was comparable with MFC using Nafion 117 (7.1 Wm{sup −3}) membrane separator. This study demonstrates that borosilicate glass membrane incorporated with PVA-Nafion matrix can be a suitable alternative to costly polymeric membrane to increase power output of MFC. Using such membranes MFC can be fabricated at around 11 fold reduced cost as compared to Nafion 117. - Highlights: • Novel membranes using PVA and borosilicate composite were fabricated. • Proton diffusion for MPN was comparable with Nafion117. • MFC-PN produced power density comparable to MFC with Nafion 117 membrane. • MPN was fabricated at almost 11 times reduced cost than Nafion 117 membranes.

  17. Selective adsorption and release of cationic organic dye molecules on mesoporous borosilicates

    International Nuclear Information System (INIS)

    Paul, Manidipa; Pal, Nabanita; Bhaumik, Asim

    2012-01-01

    Mesoporous materials can play a pivotal role as a host material for delivery application to a specific part of a system. In this work we explore the selective adsorption and release of cationic organic dye molecules such as safranine T (ST) and malachite green (MG) on mesoporous borosilicate materials. The mesoporous silica SBA-15 and borosilicate materials (MBS) were prepared using non-ionic surfactant Pluronic P123 as template via evaporation induced self-assembly (EISA) method. After template removal the materials show high surface areas and in some cases ordered mesopores of dimensions ca. 6–7 nm. High surface area, mesoporosity and the presence of heteroatom (boron) help this mesoporous borosilicate material to adsorb high amount of cationic dye molecules at its surface from the respective aqueous solutions. Furthermore, the mesoporous borosilicate samples containing higher percentage adsorbed dyes show excellent release of ST or MG dye in simulated body fluid (SBF) solution at physiological pH = 7.4 and temperature 310 K. The adsorption and release efficiency of mesoporous borosilicate samples are compared with reference boron-free mesoporous pure silica material to understand the nature of adsorbate–adsorbent interaction at the surfaces. - Graphical abstract: Highly ordered 2D-hexagonal mesoporous borosilicate materials have been synthesized by using Pluronic P123 as template. The materials show very good adsorption and release of organic cationic dye molecules under physiological conditions. Highlights: ► Highly ordered 2D-hexagonal mesoporous borosilicate. ► Nonionic Pluoronic P123 templated mesoporous material. ► Adsorption of organic dyes at the mesopore surface. ► Controlled release of dyes under physiological pH and temperature. ► Release of safranine T (ST) and malachite green (MG) dyes in simulated body fluids.

  18. Irradiation test of borosilicate glass burnable poison

    International Nuclear Information System (INIS)

    Feng Mingquan; Liao Zumin; Yang Mingjin; Lu Changlong; Huang Deyang; Zeng Wangchun; Zhao Xihou

    1991-08-01

    The irradiation test and post-irradiation examinations for borosilicate glass burnable poison are introduced. Examinations include visual examination, measurement of dimensions and density, and determination of He gas releasing and 10 B burnup. The corrosion and phenomenon of irradiation densification are also discussed. Two type glass samples have been irradiated with different levels of neutron flux. It proved that the GG-17 borosilicate glass can be used as burnable poison to replace the 10 B stainless steel in the Qinshan Nuclear Power Plant, and it is safe, economical and reasonable

  19. Gas gain stability of MSGCs on borosilicate glass

    International Nuclear Information System (INIS)

    Berg, F.D. van den; Daum, C.; Eijk, B. van; Hartjes, F.G.; Udo, F.; Zhukov, V.

    1996-01-01

    The gas gain stability in Micro Strip Gas Counters fabricated on borosilicate glass has been investigated for operation at high radiation fluxes up to 10 5 Hz/mm 2 in a X-ray set-up. We discuss effects of short and long term irradiation on the gain for different voltage settings and strip metalisations. The application of a high drift field and a back plane on positive potential provides good high rate operation up to 10 4 Hz/mm 2 . Ageing is observed to be strongly dependent on the stirp metalisation; gold and nickel perform better than aluminium and copper. (orig.)

  20. Titanium impregnated borosilicate zeolites for epoxidation catalysis

    Czech Academy of Sciences Publication Activity Database

    Přech, Jan; Vitvarová, Dana; Lupínková, Lenka; Kubů, Martin; Čejka, Jiří

    2015-01-01

    Roč. 212, AUG 2015 (2015), s. 28-34 ISSN 1387-1811 R&D Projects: GA ČR GAP106/11/0819 Institutional support: RVO:61388955 Keywords : borosilicate * titanium impregnation * epoxidation Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 3.349, year: 2015

  1. Linear chrono-amperometry using re-dissolution: application to halides; La chronoamperometrie lineaire par redissolution: application aux halogenures

    Energy Technology Data Exchange (ETDEWEB)

    Perchard, J -P; Buvet, M; Molina, R [Commissariat a l' Energie Atomique, Centre d' Etudes Nucleaires de Fontenay-aux-Roses, 92 (France)

    1966-06-01

    d'agitation et de temperature sont maintenues constantes. Le dosage des halogenures est realise par redissolution d'un depot d'halogenure mercureux constitue par une electrolyse prealable. Du point de vue analytique, la sensibilite est limitee au domaine de concentrations ou les phenomenes sont interpretables et exploitables. Dans le cas de l'ion chlorure la limite inferieure de ce domaine est voisine de 10{sup -5} M; elle est de 10{sup -6} M pour le bromure et inferieure a 10{sup -7} M pour l'iodure. Pour des concentrations inferieures, les lois simples susceptibles d'applications analytiques ne sont plus verifiees. Cependant, le dedoublement du pic observe lors de la reduction de l'iodure mercureux depose a ete interprete en mettant en evidence les proprietes electrochimiques particulieres de la couche mono-moleculaire de Hg{sub 2}I{sub 2} formee sur la goutte. (auteurs)

  2. Borosilicate glass for gamma irradiation fields

    Science.gov (United States)

    Baydogan, N.; Tugrul, A. B.

    2012-11-01

    Four different types of silicate glass specimens were irradiated with gamma radiation using a Co-60 radioisotope. Glass specimens, with four different chemical compositions, were exposed to neutron and mixed neutron/gamma doses in the central thimble and tangential beam tube of the nuclear research reactor. Optical variations were determined in accordance with standardisation concept. Changes in the direct solar absorbance (αe) of borosilicate glass were examined using the increase in gamma absorbed dose, and results were compared with the changes in the direct solar absorbance of the three different type silicate glass specimens. Solar absorption decreased due to decrease of penetration with absorbed dose. αe of borosilicate increased considerably when compared with other glass types. Changes in optical density were evaluated as an approach to create dose estimation. Mixed/thermal neutron irradiation on glass caused to increse αe.

  3. Investigation on neptunium in a borosilicate glass

    International Nuclear Information System (INIS)

    Poirot, I.

    1988-03-01

    The oxidization state and coordination of neptunium, introduced as dopant in borosilicate glasses were studied through optical, Mossbauer spectroscopies and magnetic measurements. The neptunium oxide, introduced previously as NpO 2 is reduced during the melting process of the glass. This leads to an equilibrium in which the ratio of Np 4+ to Np 3+ valences depends on experimental conditions. Spectroscopic analysises conduct to postulate the presence of different sites for each of the oxydation states of neptunium [fr

  4. Thermodynamic properties of alkali borosilicate gasses and metaborates

    International Nuclear Information System (INIS)

    Asano, Mitsuru

    1992-01-01

    Borosilicate glasses are the proposed solidifying material for storing high level radioactive wastes in deep underground strata. Those have low melting point, and can contain relatively large amount of high level radioactive wastes. When borosilicate glasses are used for this purpose, they must be sufficiently stable and highly reliable in the vitrification process, engineered storage and the disposal in deep underground strata. The main vaporizing components from borosilicate glasses are alkali elements and boron. In this report, as for the vaporizing behavior of alkali borosilicate glasses, the research on thermodynamic standpoint carried out by the authors is explained, and the thermodynamic properties of alkali metaborates of monomer and dimer which are the main evaporation gases are reported. The evaporation and the activity of alkali borosilicate glasses, the thermodynamic properties of alkali borosilicate glasses, gaseous alkali metaborates and alkali metaborate system solid solution and so on are described. (K.I.)

  5. Foreword - Acid decomposition of borosilicate ores

    International Nuclear Information System (INIS)

    Mirsaidov, U.M.; Kurbonov, A.S.; Mamatov, E.D.

    2015-01-01

    The elaboration and development of technology of processing of mineral raw materials have an important role for the industry of Tajikistan. The results of researches of the staff of Institute of Chemistry and Nuclear and Radiation Safety Agency of the Republic of Tajikistan were considered in present monograph. The physicochemical and technological aspects of processing of borosilicate raw materials of Ak-Arkhar Deposit of Tajikistan were considered. The necessary conditions of acid decomposition of raw materials were defined. The flowsheets for the processing of boron raw materials were proposed.

  6. Topological Principles of Borosilicate Glass Chemistry - An Invited Talk

    DEFF Research Database (Denmark)

    Mauro, J.C.; Smedskjær, Morten Mattrup; Youngman, R. E.

    Borosilicate glasses display a rich complexity of chemical behavior depending on the details of their composition and thermal history. We investigate the topological principles of borosilicate glass chemistry covering the extremes from pure borate to pure silicate end members. Based on NMR...

  7. Magnetic Glass Ceramics by Sintering of Borosilicate Glass and Inorganic Waste

    OpenAIRE

    Ponsot, In?s M. M. M.; Pontikes, Yiannis; Baldi, Giovanni; Chinnam, Rama K.; Detsch, Rainer; Boccaccini, Aldo R.; Bernardo, Enrico

    2014-01-01

    Ceramics and glass ceramics based on industrial waste have been widely recognized as competitive products for building applications; however, there is a great potential for such materials with novel functionalities. In this paper, we discuss the development of magnetic sintered glass ceramics based on two iron-rich slags, coming from non-ferrous metallurgy and recycled borosilicate glass. The substantial viscous flow of the glass led to dense products for rapid treatments at relatively low te...

  8. Determination of a PWR key neutron parameters uncertainties and conformity studies applications; Determination des incertitudes liees aux grandeurs neutroniques d'interet des reacteurs a eau pressurisee a plaques combustible et applications aux etudes de conformite

    Energy Technology Data Exchange (ETDEWEB)

    Bernard, D

    2002-07-01

    The aim of this thesis was to evaluate uncertainties of key neutron parameters of slab reactors. Uncertainties sources have many origins, technologic origin for parameters of fabrication and physical origin for nuclear data. First, each contribution of uncertainties is calculated and finally, a factor of uncertainties is associated to key slab parameter like reactivity, isotherm reactivity coefficient, control rod efficiency, power form factor before irradiation and lifetime. This factors of uncertainties were computed by Generalized Perturbations Theory in case of step 0 and by directs calculations in case of irradiation problems. One of neutronic conformity applications was about fabrication and nuclear data targets precision adjustments. Statistic (uncertainties) and deterministic (deviations) approaches were studied. Then neutronics key slab parameters uncertainties were reduced and so nuclear performances were optimised. (author)

  9. Determination of a PWR key neutron parameters uncertainties and conformity studies applications; Determination des incertitudes liees aux grandeurs neutroniques d'interet des reacteurs a eau pressurisee a plaques combustible et applications aux etudes de conformite

    Energy Technology Data Exchange (ETDEWEB)

    Bernard, D

    2002-07-01

    The aim of this thesis was to evaluate uncertainties of key neutron parameters of slab reactors. Uncertainties sources have many origins, technologic origin for parameters of fabrication and physical origin for nuclear data. First, each contribution of uncertainties is calculated and finally, a factor of uncertainties is associated to key slab parameter like reactivity, isotherm reactivity coefficient, control rod efficiency, power form factor before irradiation and lifetime. This factors of uncertainties were computed by Generalized Perturbations Theory in case of step 0 and by directs calculations in case of irradiation problems. One of neutronic conformity applications was about fabrication and nuclear data targets precision adjustments. Statistic (uncertainties) and deterministic (deviations) approaches were studied. Then neutronics key slab parameters uncertainties were reduced and so nuclear performances were optimised. (author)

  10. The structure of leached sodium borosilicate glass

    International Nuclear Information System (INIS)

    Bunker, B.C.; Tallant, D.R.; Headley, T.J.; Turner, G.L.; Kirkpatrick, R.J.

    1988-01-01

    Raman spectroscopy, solid state 29 Si, 11 B, 17 O, and 23 Na nuclear magnetic resonance spectroscopy, and transmission electron microscopy have been used to investigate how the structures of sodium borosilicate glasses change during leaching in water at pH 1, 9, and 12. Results show that the random network structure present prior to leaching is transformed into a network of small condensed ring structures and/or colloidal silica particles. The restructuring of leached glass can be rationalised on the basis of simple hydrolysis (depolymerisation) and condensation (repolymerisation) reactions involving Si-O-Si and Si-O-B bonds. The structural changes that occur during leaching influence the properties of the leached layer, including leaching kinetics, crazing and spalling, and slow crack growth. (author)

  11. 57Fe Moessbauer effect in borosilicate glasses

    International Nuclear Information System (INIS)

    Music, S.

    1989-01-01

    The present study was carried out to elucidate the valence state of iron and its co-ordination in borosilicate glasses, which are being investigated as possible solidification matrices for the immobilization of a simulated nuclear waste. 57 Fe Mossbauer spectroscopy was used as the experimental technique. The chemical compositions of glass samples and the experimental conditions for the preparation of these samples are given. Iron in the form of haematite (α-Fe 2 O 3 ) was used as doping material. Details of the experimental procedure have previously been described. Isomer shifts are calculated relative to α-iron. The results indicate a strong dependence of the valency of the iron and its coordination on the chemical composition of the glass and the Fe 2 O 3 content. The method of preparing the glasses also influences the state of the iron in oxide glasses. (Author)

  12. Conception and test of an integrated circuit (ASIC): application to multiwire chambers and photomultipliers of the GRAAL experience; Conception et test d`un circuit integre (ASIC): application aux chambres multifils et aux photomultiplicateurs de l`experience GRAAL

    Energy Technology Data Exchange (ETDEWEB)

    Bugnet, H.

    1995-11-21

    The nuclear physics project GRAAL (GRenoble Anneau Accelerateur Laser) located at the European Synchrotron Radiation Facility (ESRF) in Grenoble produces a high energy photon beam with a maximum energy of 1.5 GeV. This gamma beam is obtained by Compton backscattering and can be polarized easily. It permits to probe, in an original way, the structure of the nucleon. The associated detector system includes multiwire proportional chambers and scintillator hodoscopes. A kit of six ASICs (Application Specific Integrated Circuit) has been developed and used for the signal processing and data conditioning up to the level of the data acquisition. This integrated electronics can be mounted right on the detectors. Obvious advantages, due to the reduction of the length of the wires and the number of connections, are an improvement of the signal quality and an increase of the reliability. The Wire Processor (WP), ASIC designed and tested during this thesis, treats the signals from the chamber wires and the photomultipliers. In one chip, there are two identical channels permitting the amplification, the amplitude discrimination, the generation of a programmable delay and the writing in a two state memory in case of coincidence with an external strobe signal. The measurement of the multiwire chamber efficiency demonstrates the functioning of the WP, the data conditioning electronics, the data acquisition and the chamber itself. (author). 62 refs., 111 figs., 13 tabs.

  13. 11B nutation NMR study of powdered borosilicates

    International Nuclear Information System (INIS)

    Woo, Ae Ja; Yang, Kyung Hwa; Han, Duk Young

    1998-01-01

    In this work, we applied the 1D 11 B nutation NMR method for the analysis of the local structural environments in powdered borosilicates (SiO 2 -B 2 O 3 ). Spin dynamics during a rf irradiation for spin I=3/2 was analytically calculated with a density matrix formalism. Spectral simulation programs were written in MATLAB on a PC. Two borosilicates prepared by the sol-gel process at different stabilization temperature were used for the 1D 11 B nutation NMR experiment. The 11 B NMR parameters, quadrupole coupling constants (e 2 qQ/h) and asymmetry parameters (η), for each borosilicate were extracted from the nonlinear least-squares fitting. The effects of heat treatments on the local structures of boron sites in borosilicates were discussed

  14. Aux origines du monde

    CERN Multimedia

    2004-01-01

    "C'est l'histoire d'une aventure humaine, scientifique, international qui a vu le jour il y a cinquante ans, aux confins de la Suisse et du département de l'Ain. Le plus grand laboratoire de physique des particules du monde, le Cern, a été fondé en 1954. Les festivités organisées à l occasion de cet anniversaire connaîtront leur point d'orgue le 16 octobre prochain, avec portes-ouvertes, accueil de personallités et inauguration d'un monumnet spécifique, le Globe de l'innovation" (2 pages)

  15. Fabrication of Low Noise Borosilicate Glass Nanopores for Single Molecule Sensing.

    Directory of Open Access Journals (Sweden)

    Jayesh A Bafna

    Full Text Available We show low-cost fabrication and characterization of borosilicate glass nanopores for single molecule sensing. Nanopores with diameters of ~100 nm were fabricated in borosilicate glass capillaries using laser assisted glass puller. We further achieve controlled reduction and nanometer-size control in pore diameter by sculpting them under constant electron beam exposure. We successfully fabricate pore diameters down to 6 nm. We next show electrical characterization and low-noise behavior of these borosilicate nanopores and compare their taper geometries. We show, for the first time, a comprehensive characterization of glass nanopore conductance across six-orders of magnitude (1M-1μM of salt conditions, highlighting the role of buffer conditions. Finally, we demonstrate single molecule sensing capabilities of these devices with real-time translocation experiments of individual λ-DNA molecules. We observe distinct current blockage signatures of linear as well as folded DNA molecules as they undergo voltage-driven translocation through the glass nanopores. We find increased signal to noise for single molecule detection for higher trans-nanopore driving voltages. We propose these nanopores will expand the realm of applications for nanopore platform.

  16. Antagonist effects of calcium on borosilicate glass alteration

    Energy Technology Data Exchange (ETDEWEB)

    Mercado-Depierre, S. [CEA Marcoule, DTCD SPDE LCLT, 30207 Bagnols sur Cèze (France); Angeli, F., E-mail: frederic.angeli@cea.fr [CEA Marcoule, DTCD SPDE LCLT, 30207 Bagnols sur Cèze (France); Frizon, F. [CEA Marcoule, DTCD SECM LP2C, 30207 Bagnols sur Cèze (France); Gin, S. [CEA Marcoule, DTCD SPDE LCLT, 30207 Bagnols sur Cèze (France)

    2013-10-15

    Graphical abstract: Display Omitted -- Highlights: •Kinetic study of glass alteration is investigated in calcium-enriched solutions. •New insights into silicon–calcium interactions in glass/cement systems are proposed. •Glass alteration is controlled by pH, Ca concentration and reaction progress. •Evidence of antagonist effects according to the importance of these parameters. -- Abstract: Numerous studies have been conducted on glass and cement durability in contact with water, but very little work to date has focused directly on interactions between the two materials. These interactions are mostly controlled by silicon–calcium reactivity. However, the physical and chemical processes involved remain insufficiently understood to predict the evolution of coupled glass–cement systems used in several industrial applications. Results are reported from borosilicate glass alteration in calcium-rich solutions. Our data show that four distinct behaviors can be expected according to the relative importance of three key parameters: the pH, the reaction progress (short- or long-term alteration) and the calcium concentration. Glass alteration is thus controlled by specific mechanisms depending on the solution chemistry: calcium complexation at the glass surface, precipitation of calcium silicate hydrates (C–S–H) or calcium incorporation in the altered layer. These findings highlight the impact of silicon–calcium interactions on glass durability and open the way for a better understanding of glass–cement mixing in civil engineering applications as well as in nuclear waste storage.

  17. Antagonist effects of calcium on borosilicate glass alteration

    International Nuclear Information System (INIS)

    Mercado-Depierre, S.; Angeli, F.; Frizon, F.; Gin, S.

    2013-01-01

    Graphical abstract: Display Omitted -- Highlights: •Kinetic study of glass alteration is investigated in calcium-enriched solutions. •New insights into silicon–calcium interactions in glass/cement systems are proposed. •Glass alteration is controlled by pH, Ca concentration and reaction progress. •Evidence of antagonist effects according to the importance of these parameters. -- Abstract: Numerous studies have been conducted on glass and cement durability in contact with water, but very little work to date has focused directly on interactions between the two materials. These interactions are mostly controlled by silicon–calcium reactivity. However, the physical and chemical processes involved remain insufficiently understood to predict the evolution of coupled glass–cement systems used in several industrial applications. Results are reported from borosilicate glass alteration in calcium-rich solutions. Our data show that four distinct behaviors can be expected according to the relative importance of three key parameters: the pH, the reaction progress (short- or long-term alteration) and the calcium concentration. Glass alteration is thus controlled by specific mechanisms depending on the solution chemistry: calcium complexation at the glass surface, precipitation of calcium silicate hydrates (C–S–H) or calcium incorporation in the altered layer. These findings highlight the impact of silicon–calcium interactions on glass durability and open the way for a better understanding of glass–cement mixing in civil engineering applications as well as in nuclear waste storage

  18. Surface chemistry and durability of borosilicate glass

    International Nuclear Information System (INIS)

    Carroll, S.A.; Bourcier, W.L.; Phillips, B.L.

    1994-01-01

    Important glass-water interactions are poorly understood for borosilicate glass radioactive waste forms. Preliminary results show that glass durability is dependent on reactions occurring at the glass-solution interface. CSG glass (18.2 wt. % Na 2 O, 5.97 wt. % CaO, 11.68 wt. % Al 2 O 3 , 8.43 wt. % B 2 O 3 , and 55.73 wt. % SiO 2 ) dissolution and net surface H + and OH - adsorption are minimal at near neutral pH. In the acid and alkaline pH regions, CSG glass dissolution rates are proportional to [H + ] adsorbed 2 and [OH - ] adsorbed 0.8 , respectively. In contrast, silica gel dissolution and net H + and OH - adsorption are minimal and independent of pH in acid to neutral solutions. In the alkaline pH region, silica gel dissolution is proportional to [OH - ] adsorbed 0.9 adsorbed . Although Na adsorption is significant for CSG glass and silica gel in the alkaline pH regions, it is not clear if it enhances dissolution, or is an artifact of depolymerization of the framework bonds

  19. Method of manufacturing borosilicate glass solidification products

    International Nuclear Information System (INIS)

    Tanaka, Tsuneya.

    1986-01-01

    Purpose: To obtain glass solidification products efficiently in a dry process from medium and high level radioactive liquid wastes discharged from PWR type reactors. Method: Boric acid-containing radioactive liquid wastes generated from primary coolants of PWR type reactors are evaporated to condensate as the pre-treatment. The concentrated liquid wastes are supplied to a drum type rotary kiln. While on the other hand, usual glass frits are introduced into the kiln. The liquid wastes are dried in the rotary kiln, as well as B 2 O 3 and the glass frits in the liquid wastes are combined into glass particles. In this case, since the kiln is rotated, no glass particles are deposited on the wall of the kiln. Then, the glass particles are introduced for melting into a high frequency melting furnace made of metal. The melting temperature is set to 1100 - 1150 deg C. The molten borosilicate glass is recovered from the bottom of the melting furance, contained in a canister and cooled for several hours, and then a cover is welded to the canister. (Ikeda, J.)

  20. Composition-Structure-Property Relations of Compressed Borosilicate Glasses

    Science.gov (United States)

    Svenson, Mouritz N.; Bechgaard, Tobias K.; Fuglsang, Søren D.; Pedersen, Rune H.; Tjell, Anders Ø.; Østergaard, Martin B.; Youngman, Randall E.; Mauro, John C.; Rzoska, Sylwester J.; Bockowski, Michal; Smedskjaer, Morten M.

    2014-08-01

    Hot isostatic compression is an interesting method for modifying the structure and properties of bulk inorganic glasses. However, the structural and topological origins of the pressure-induced changes in macroscopic properties are not yet well understood. In this study, we report on the pressure and composition dependences of density and micromechanical properties (hardness, crack resistance, and brittleness) of five soda-lime borosilicate glasses with constant modifier content, covering the extremes from Na-Ca borate to Na-Ca silicate end members. Compression experiments are performed at pressures ≤1.0 GPa at the glass transition temperature in order to allow processing of large samples with relevance for industrial applications. In line with previous reports, we find an increasing fraction of tetrahedral boron, density, and hardness but a decreasing crack resistance and brittleness upon isostatic compression. Interestingly, a strong linear correlation between plastic (irreversible) compressibility and initial trigonal boron content is demonstrated, as the trigonal boron units are the ones most disposed for structural and topological rearrangements upon network compaction. A linear correlation is also found between plastic compressibility and the relative change in hardness with pressure, which could indicate that the overall network densification is responsible for the increase in hardness. Finally, we find that the micromechanical properties exhibit significantly different composition dependences before and after pressurization. The findings have important implications for tailoring microscopic and macroscopic structures of glassy materials and thus their properties through the hot isostatic compression method.

  1. Using of borosilicate glass waste as a cement additive

    International Nuclear Information System (INIS)

    Han, Weiwei; Sun, Tao; Li, Xinping; Sun, Mian; Lu, Yani

    2016-01-01

    Highlights: • Borosilicate glass waste used as cement additive can improves its radiation shielding. • When content is 14.8%, the linear attenuation coefficient is 0.2457 cm"−"1 after 28 d. • From 0 to 22.2%, linear attenuation coefficient firstly increase and then decrease. - Abstract: Borosilicate glass waste is investigated as a cement additive in this paper to improve the properties of cement and concrete, such as setting time, compressive strength and radiation shielding. The results demonstrate that borosilicate glass is an effective additive, which not only improves the radiation shielding properties of cement paste, but also shows the irradiation effect on the mechanical and optical properties: borosilicate glass can increase the compressive strength and at the same time it makes a minor impact on the setting time and main mineralogical compositions of hydrated cement mixtures; and when the natural river sand in the mortar is replaced by borosilicate glass sand (in amounts from 0% to 22.2%), the compressive strength and the linear attenuation coefficient firstly increase and then decrease. When the glass waste content is 14.8%, the compressive strength is 43.2 MPa after 28 d and the linear attenuation coefficient is 0.2457 cm"−"1 after 28 d, which is beneficial for the preparation of radiation shielding concrete with high performances.

  2. Using of borosilicate glass waste as a cement additive

    Energy Technology Data Exchange (ETDEWEB)

    Han, Weiwei [State Key Laboratory of Silicate Materials for Architectures, Wuhan University of Technology, Wuhan, Hubei 430070 (China); School of Civil Engineering and Architecture, Wuhan University of Technology, Wuhan, Hubei 430070 (China); Sun, Tao, E-mail: sunt@whut.edu.cn [State Key Laboratory of Silicate Materials for Architectures, Wuhan University of Technology, Wuhan, Hubei 430070 (China); Key Laboratory of Roadway Bridge & Structure Engineering, Wuhan University of Technology, Wuhan, Hubei 430070 (China); Li, Xinping [Key Laboratory of Roadway Bridge & Structure Engineering, Wuhan University of Technology, Wuhan, Hubei 430070 (China); Sun, Mian [School of Materials Science and Engineering, Wuhan University of Technology, Wuhan, Hubei 430070 (China); Lu, Yani [Urban Construction Institute, Hubei Engineering University, Xiaogan, Hubei 432000 (China)

    2016-08-15

    Highlights: • Borosilicate glass waste used as cement additive can improves its radiation shielding. • When content is 14.8%, the linear attenuation coefficient is 0.2457 cm{sup −1} after 28 d. • From 0 to 22.2%, linear attenuation coefficient firstly increase and then decrease. - Abstract: Borosilicate glass waste is investigated as a cement additive in this paper to improve the properties of cement and concrete, such as setting time, compressive strength and radiation shielding. The results demonstrate that borosilicate glass is an effective additive, which not only improves the radiation shielding properties of cement paste, but also shows the irradiation effect on the mechanical and optical properties: borosilicate glass can increase the compressive strength and at the same time it makes a minor impact on the setting time and main mineralogical compositions of hydrated cement mixtures; and when the natural river sand in the mortar is replaced by borosilicate glass sand (in amounts from 0% to 22.2%), the compressive strength and the linear attenuation coefficient firstly increase and then decrease. When the glass waste content is 14.8%, the compressive strength is 43.2 MPa after 28 d and the linear attenuation coefficient is 0.2457 cm{sup −1} after 28 d, which is beneficial for the preparation of radiation shielding concrete with high performances.

  3. Porous silicon: some new applications of this material with astonishing properties; Le silicium poreux: nouvelles applications de ce materiau aux proprietes remarquables

    Energy Technology Data Exchange (ETDEWEB)

    Gauthier-Manuel, B. [Laboratoire FEMTO-ST, Dept. MN2S, CNRS UMR 6174, 25 - Besancon (France)

    2009-02-15

    Anodic oxidation of silicon wafer in fluor-hydric acid solution leads to a porous material with surprising properties. Structures at nano-metric scale are source of deep photoluminescence. The very large scale of pore size available and the high specific surface obtained allows optical and microfabrication applications. This paper describes the electrochemical process of this material, some characterization methods, and some new applications in the fields of micro-energy and molecular separation. (author)

  4. Utilization of borosilicate glass for transuranic waste immobilization

    International Nuclear Information System (INIS)

    Ledford, J.A.; Williams, P.M.

    1979-01-01

    Incinerated transuranic waste and other low-level residues have been successfully vitrified by mixing with boric acid and sodium carbonate and heating to 1050 0 C in a bench-scale continuous melter. The resulting borosilicate glass demonstrates excellent mechanical durability and chemical stability

  5. IR study of Pb–Sr titanate borosilicate glasses

    Indian Academy of Sciences (India)

    Administrator

    IR study of Pb–Sr titanate borosilicate glasses. C R GAUTAM*, DEVENDRA KUMAR. † and OM PARKASH. †. Department of Physics, University of Lucknow, Lucknow 226 007, India. †. Department of Ceramic Engineering, Institute of Technology, Banaras Hindu University, Varanasi 221 005, India. MS received 3 January ...

  6. Sintering-alkaline processing of borosilicate ores of Tajikistan

    International Nuclear Information System (INIS)

    Nazarov, F.A.

    2018-01-01

    The aim of the work is to study the processes of decomposition of boron-containing ore by sintering with NaOH, finding the optimal parameters of the decomposition process, studying the kinetics of processes and developing the technological foundations for ore processing. The processes of borosilicate ore processing were studied by sintering with NaOH. Possible mechanisms of chemical reactions of the process of sintering-alkaline decomposition of boron-containing ore are established, the results of which are substantiated by physicochemical methods of analysis. A principal technological scheme for processing of borosilicate ores by a sintering-alkaline method has been developed. In the first chapter, data on alkaline and caking processes for processing boron-containing and aluminium comprising raw materials are available in the literature. Based on this, the directions of our own research are outlined. The second chapter is devoted to the study of the chemical and mineralogical compositions of borosilicate ores and their concentrates with the help of X-ray phase and chemical analysis methods, the stoichiometric calculation of the formation of aluminum, iron, and boron salts has been carried out, and a thermodynamic analysis of the processes of sintering borosilicate ores with alkali has been considered. The third chapter presents the results of a study of sintering-alkaline method of processing of initial borosilicate ore of the Ak-Arkhar Deposit and its concentrate without calcination and after calcination. The kinetics of sintering of borosilicate ores with sodium hydroxide was studied. The optimal conditions of borosilicate ore sintering before and after the preliminary calcination with alkali were determined. Optimal parameters of the sintering process have been found: sintering temperature 800-8500 deg C, duration of the process - 60 minutes, mass ratio of NaOH to raw materials 2: 1. The conditions for sintering of borosilicate concentrate with alkali have been

  7. Entrapment of 137Cs vapour generated during vitrification and casting of cesium borosilicate glass by inorganic materials

    International Nuclear Information System (INIS)

    Ram, Ramu; Gandhi, Shyamala; Dash, A.; Varma, R.N.

    2003-01-01

    Efficiency of different inorganic materials like zirconium antimonate (ZrA), ammonium molybdophosphate (AMP), synthetic zeolites, activated charcoal, glass wool etc, towards the entrapment of 137 Cs vapour escaping during vitrification and casting of cesium borosilicate glass required for the preparation of 137 Cs sources for medical and industrial applications have been determined. The recovery of entrapped cesium using dilute acids for subsequent recycling has also been explored. (author)

  8. Microscopic approach of molecular dynamics. Applications to reactions near the barrier; Approches microscopiques de la dynamique nucleaire. Applications aux reactions autour de la barriere

    Energy Technology Data Exchange (ETDEWEB)

    Simenel, C.; Avez, B. [CEA Saclay, Dept. d' Astrophysique, de Physique des Particules de Physique Nucleaire et de l' Instrumentation Associee (DSM/DAPNIA/SPhN), 91- Gif sur Yvette (France); Lacroix, D. [GANIL, 14 - Caen (France)

    2007-07-01

    This lecture introduces several microscopic approaches to nuclear dynamics. Our goal is to provide a good description of low energy heavy ions collisions. We study both the formalism and the practical application of the time-dependent Hartree-Fock (TDHF) theory. The TDHF approach gives a mean field dynamics of the system under the assumption of independent particles. As an example, we study the fusion of both spherical and deformed nuclei with TDHF. We also show that nucleon transfer may occur between nuclei below the barrier. These studies allow us to specify the field of applications of TDHF in one hand, and, in the other hand, its intrinsic limitations, as for instance the fact that there is no fusion by tunnel effect with TDHF. It is then important to get rid of the independent particle assumption. We finally present some approaches to go beyond TDHF, including for instance pairing and/or collision term between nucleons, though only few realistic applications have been performed so far. (authors)

  9. Instructions for the use of the methodological tools applicable to polluted sites and soils; Mode d'emploi des outils methodologiques applicables aux sites et sols pollues

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    The French policy in the domain of polluted sites and soils is based on a limited number of principles which are: the prevention of future pollutions, the identification of all possible potential risks, a well-suited treatment process which depends on the effective environmental impact and on the intended use of the site. This document aims at identifying the main questions raised by a given situation. It proposed useful methodological tools for the construction of answers to the problems encountered: 1 - general approach (main guidelines for the different steps of the management of a polluted site, different possible approaches); 2 - examples of application (industrial site in use, closing down of an industrial site, accidental situation (recent pollution), fortuitous discovery of a pollution on a site, pollutions with limited surface extension, site involved in a land transaction, polluted site with a sensible use, industrial waste lands). (J.S.)

  10. Adaptative control of aero-acoustic instabilities. Application to propulsion systems; Controle adaptatif des instabilites aeroacoustiques. Application aux systemes de propulsion

    Energy Technology Data Exchange (ETDEWEB)

    Mettenleiter, M.

    2000-02-15

    This work treats active adaptive control of aero-acoustic instabilities. In particular, we are interested in an application to solid propellant rockets. The study is part of the research program ASSM coordinated by CNES and ONERA and the aim is to increase the performance of the P230 segmented solid propellant boosters of the Ariane 5 rocket. The work has been carried out in collaboration with other partners of this program. The main objective of this study is the development of control algorithms, able to diminish low frequency instabilities encountered in propulsion systems. First, the instability phenomenon is analyzed in a simplified experimental setup and similarity is shown with instabilities observed in real propulsion systems. This study enables us to conceive adaptive control strategies, which have been tested on three different levels: - In a simplified dynamical simulation; - During an experimental study; - Using full numerical simulations. The three levels of application made it possible to study the behaviour of the different control strategies. We could show that the actuator signal modifies the behaviour of the system on the acoustic level. But as there is a strong interaction between the pressure fluctuations and the hydrodynamic behaviour, the flow structure is also modified by active control. This behaviour corresponds to the simplified model of the phenomenon, which has been used to define the control algorithms. The control action 'at the noise source' makes it possible to distinguish this kind of algorithms from schemes based on the anti-noise principle. After this first part, where we showed the feasibility of control, we particularly considered algorithms which can act in an unknown environment. The information about the system behaviour. which is necessary for convergence of the controller is now obtained in parallel during control. An identification off-line, used at the beginning of the research, is no longer necessary. Self

  11. Radiation structurization borosilicates in the region of small dozes

    International Nuclear Information System (INIS)

    Gadzhieva, N.N.; Melikova, S.Z.

    2007-01-01

    Full text: Borosilicates are one of perspective materials who are characterized by high thermal and radiating stability. Owing to these properties they are widely applied as constructional materials in reactor technologies. The structural condition of a bor in crystal compounds is characterized by two coordination numbers- three and and four. Change of this condition speaks also original properties borosilicate. Studying influence is actual γ-irradiations in the region of rather small dozes on ability change coordination of a B in borosilicate. In the given work results of IR-spectroscopic researches initial and radiation-structured borosilicates are presented. With this purpose were investigated borosilicates with maintenance B 2 O 3 in SiO 2 equal 0.5; 1; 1.5; 3; 5 and 10 mas.%, received by a method of sedimentation. Samples irradiated γ-quanta on an isotope source 60 Co with capacity of a doze dD γ /dt=0.80 Gy/s. The absorbed doze made D γ ∼0.5-50 kGy. IR-spectra of reflection initial and γ-irradiated tablets borosilicates measured on spectrophotometer Specord 71 IR (Carl Zeiss) at a room temperature. Optical density of the bands corresponding trigonal and tetrahedric - coordination atoms of a bor and their parity at the various mass maintenance of boric anhydride in SiO 2 before and after γ-irradiation. The absorption bands of asymmetric stretching vibration BO 3 and BO 4 groupings in structure of B 2 O 3 /SiO 2 have maxima at ν=1320 (ν as BO 3 ) and 980 cm -1 (ν as BO 4 ). Studying dose has shown dependences D 1320 /D 980 , that in the region of rather small dozes 0.5 γ 1320 /D 980 of optical densities trigonal and tetrahedric coordination a B it is established, that at the contain B 2 O 3 in SiO 2 /B 2 O 3 ∼1.5 mas.% maximal introduction B 3+ in a lattice oxide silicon is observed

  12. Development of interface tracking method. Two-phase flows applications; Developpement d'une methode de suivi d'interface. Applications aux ecoulements diphasiques

    Energy Technology Data Exchange (ETDEWEB)

    Tanguy, S.

    2004-11-15

    Spray formation mechanisms study from a liquid-gas flow is a fundamental research subject, which industrial applications are large, especially in combustion and propulsion field. Numerical simulation of such flows appear as an essential complement to experimental and theoretical studies, for comprehension and accurate prediction of such physical processes. In this study we developed an numerical interface tracking technique with a Navier-Stokes solver to study accurately the liquid-gas interface dynamics. We describe Level Set method which has been used to track interface motion, and numerical methods for solving Navier-Stokes equations. Different numerical schemes have been tested to improve the computation accuracy. Ghost Fluid Method enables a robust and accurate treatment of discontinuities across the liquid-gas interface. The codes developed (2D, 3D, parallelization MPI) are then used to study droplets collisions. Comparisons with experimental results show that simulations are realistic and predictive. Next, feasibility studies are done on more complex configurations. Droplets spray formation from primary atomization of a liquid jet seems to be especially a promising investigation field for such simulations. Finally, reactive interfaces propagation, as liquid vaporization and premixed combustion have also been studied using Ghost Fluid Method to impose specific jump conditions. (author)

  13. Long term modelling in a second rank world: application to climate policies; Modeliser le long terme dans un monde de second rang: application aux politiques climatiques

    Energy Technology Data Exchange (ETDEWEB)

    Crassous, R

    2008-11-15

    This research aims at the identification of the dissatisfaction reasons with respect to the existing climate models, at the design of an innovating modelling architecture which would respond to these dissatisfactions, and at proposing climate policy assessment pathways. The authors gives a critique assessment of the modelling activity within the field of climate policies, outlines the fact that the large number and the scattering of existing long term scenarios hides a weak control of uncertainties and of the inner consistency of the produced paths, as well as the very low number of modelling paradigms. After a deepened analysis of modelling practices, the author presents the IMACLIM-R modelling architecture which is presented on a world scale and includes 12 areas and 12 sectors, and allows the simulation of evolutions by 2050, and even 2100, with a one-year time step. The author describes a scenario without any climate policy, highlights reassessment possibilities for economical trajectories which would allow greenhouse gas concentration stabilisation on a long term basis through the application of IMACLIM-R innovations. He outlines adjustment and refinement possibilities for climate policies which would robustly limit the transition cost risks.

  14. CO{sub 2} direct cycles suitable for AGR type reactors; Cycles directs de gaz carbonique applicables aux reacteurs du genre AGR

    Energy Technology Data Exchange (ETDEWEB)

    Maillet, E [Commissariat a l' Energie Atomique. Centre d' Etudes Nucleaires de Saclay, 91 - Gif-sur-Yvette (France)

    1967-10-01

    The perspectives given by the gas turbines under pressure, to build simple nuclear power plants and acieving significantly high yield, are specified. The CO{sub 2} is characterised by by good efficiency under moderate temperature (500 to 750 Celsius degrees), compactness and the simpleness of machines and the safe exploitation (supply, storage, relief cooling, thermosyphon). The revision of thermal properties of the CO{sub 2} and loss elements show that several direct cycles would fit in particular to the AGR type reactors. Cycles that would diverge a little from classical models and able to lead to power and heat generation can lead by simple means to the best results. Several satisfying solutions present for the starting up, the power regulation and the stopping. The nuclear power plant components and the functioning safety are equally considered in the present report. The conclusions stimulate the studies and realizations of carbon dioxide gas turbines in when approprite. [French] Les perspectives offertes par la turbine a gaz sous pression, pour construire des centrales nucleaires simples et de rendement progressivement eleve, se precisent actuellement. le CO{sub 2} se distingue par sa bonne efficacite a temperature moderee (500 a 750 degres celsius), la compacite et la simplicite des machines, et la surete qu'il apporte a l'exploitation ( approvisionnement, stockage, refroidissement de secours, thermosiphon). La revision des proprietes thermophysiques du CO{sub 2} et des elements de pertes montre que divers cycles directs conviendraient en particulier aux reacteurs agr ou derives. Des cycles s'ecartant peu des modeles classiques, et se pretant ulterieurement a la production simultanee d'electricite et de chaleur, peuvent conduire par des moyens simples aux meilleurs resultats d'ensemble. Plusieurs solutions satisfaisantes se presentent pour le demarrage, le reglage de la puissance et l'arret. Les composants de la centrale et la surete de fonctionnement sont

  15. Rutherford backscattering investigation of the corrosion of borosilicate glass

    International Nuclear Information System (INIS)

    Sales, B.C.; Boatner, L.A.; Naramoto, H.; White, C.W.

    1981-10-01

    The RBS spectra from Frit 21 borosilicate glasses doped with 5 wt % UO 2 , SrO, or Cs 2 O show that: during the initial stages of leaching (0 to 3 h) there is a substantial (300 to 500%) enhancement in the concentration of U, Sr, Ca, and Ti in the outer surface layer and that this enhancement is accompanied by a large depletion of Na, Si, and Cs; and upon further leaching under static conditions (24 h) the leached surface layer composition is indistinguishable from the unleached surface. Other borosilicate glasses such as PNL 76-68 may eventually show the same behavior if the final equilibrium pH value is greater than 9. The technique of Rutherford backscattering depth profile analysis can be a powerful tool for investigating the initial stages of glass corrosion

  16. Fabrication of Silicon Nitride Dental Core Ceramics with Borosilicate Veneering material

    Science.gov (United States)

    Wananuruksawong, R.; Jinawath, S.; Padipatvuthikul, P.; Wasanapiarnpong, T.

    2011-10-01

    Silicon nitride (Si3N4) ceramic is a great candidate for clinical applications due to its high fracture toughness, strength, hardness and bio-inertness. This study has focused on the Si3N4 ceramic as a dental core material. The white Si3N4 was prepared by pressureless sintering at relative low sintering temperature of 1650 °C in nitrogen atmosphere. The coefficient of thermal expansion (CTE) of Si3N4 ceramic is lower than that of Zirconia and Alumina ceramic which are popular in this field. The borosilicate glass veneering was employed due to its compatibility in thermal expansion. The sintered Si3N4 specimens represented the synthetic dental core were paintbrush coated by a veneer paste composed of borosilicate glass powder (tube furnace between 1000-1200°C. The veneered specimens fired at 1100°C for 15 mins show good bonding, smooth and glossy without defect and crazing. The veneer has thermal expansion coefficient as 3.98×10-6 °C-1, rather white and semi opaque, due to zirconia addition, the Vickers hardness as 4.0 GPa which is closely to the human teeth.

  17. Fabrication of Silicon Nitride Dental Core Ceramics with Borosilicate Veneering material

    International Nuclear Information System (INIS)

    Wananuruksawong, R; Jinawath, S; Wasanapiarnpong, T; Padipatvuthikul, P

    2011-01-01

    Silicon nitride (Si 3 N 4 ) ceramic is a great candidate for clinical applications due to its high fracture toughness, strength, hardness and bio-inertness. This study has focused on the Si 3 N 4 ceramic as a dental core material. The white Si 3 N 4 was prepared by pressureless sintering at relative low sintering temperature of 1650 deg. C in nitrogen atmosphere. The coefficient of thermal expansion (CTE) of Si 3 N 4 ceramic is lower than that of Zirconia and Alumina ceramic which are popular in this field. The borosilicate glass veneering was employed due to its compatibility in thermal expansion. The sintered Si 3 N 4 specimens represented the synthetic dental core were paintbrush coated by a veneer paste composed of borosilicate glass powder ( 2 O 3 - partial stabilized zirconia) and 30 wt% of polyvinyl alcohol (5 wt% solution). After coating the veneer on the Si 3 N 4 specimens, the firing was performed in electric tube furnace between 1000-1200 deg. C. The veneered specimens fired at 1100 deg. C for 15 mins show good bonding, smooth and glossy without defect and crazing. The veneer has thermal expansion coefficient as 3.98x10 -6 deg. C -1 , rather white and semi opaque, due to zirconia addition, the Vickers hardness as 4.0 GPa which is closely to the human teeth.

  18. Methods for determining thermal stresses values. Some examples relating to nuclear reactors; Methodes de determination des contraintes thermiques. Quelques exemples d'application aux reacteurs

    Energy Technology Data Exchange (ETDEWEB)

    Bernard, J; Gautier, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Peres, A [Israel Institute of Technology, Dept. of Nuclear Science Technion (Israel)

    1958-07-01

    As modern techniques develop more elaborate machines, and make their way towards higher and higher temperatures and pressures, the thermal stresses become a matter of major importance in the design of mechanical structures. In the first part of this paper, the authors examine the problem from a theoretical standpoint, and try to evaluate the aptitude and limitation of mathematical techniques to attain the quantitative values of thermal stresses. This paper deals mainly with the experimental methods to measure thermal stresses. The authors show some examples relating to nuclear reactors. (author)Fren. [French] Au fur et a mesure que la technique moderne developpe des machines plus poussees et s'oriente vers des temperatures et des pressions toujours plus elevees, les contraintes thermiques deviennent un facteur d'importance capitale dans le calcul des structures mecaniques. Les auteurs examinent d'abord l'aspect theorique du probleme, ainsi que l'aptitude et les limites du calcul pour exprimer quantitativement la valeur des contraintes thermiques. Les auteurs exposent principalement, ensuite, les methodes experimentales qui permettent de mesurer ces contraintes, et illustrent cet expose de quelques exemples relatifs aux installations nucleaires. (auteur)

  19. Sulphate Incorporation in Borosilicate Glasses and Melts: a Kinetic Approach

    Energy Technology Data Exchange (ETDEWEB)

    Lenoir, M. [CEA, DEN, Laboratoire d' etude et de Developpement de Matrices de Conditionnement, Centre de Marcoule, 30207 Bagnols-sur-Ceze (France); Physique des Mineraux et Magmas, UMR 7047, CNRS- Institut de Physique du Globe de Paris, 7 place Jussieu, 75252 Paris 05 (France); Grandjean, A. [Institut de Chimie Separative de Marcoule, UMR 5257, Laboratoire des Nanomateriaux Autoreparants, Marcoule, 30207 Bagnols-sur-Ceze (France); Dussossoy, J.L. [CEA, DEN, Laboratoire d' etude et de Developpement de Matrices de Conditionnement, Centre de Marcoule, 30207 Bagnols-sur-Ceze (France); Neuville, D.R. [Physique des Mineraux et Magmas, UMR 7047, CNRS- Institut de Physique du Globe de Paris, 7 place Jussieu, 75252 Paris 05 (France)

    2008-07-01

    The kinetics of sulphate departure in a sodium borosilicate melt were studied using in situ Raman spectroscopy. This technique allows the quantification of the amount of sulphate dissolved in a borosilicate glass as a function of heating time by comparison with measurements obtained by microprobe wavelength dispersive spectrometry. To quantify the sulphate content obtained with Raman spectroscopy, the integrated intensity of the sulphate band at 990 cm{sup -1} was scaled to the sum of the integrated bands between 800 and 1200 cm{sup -1}, bands that are assigned to Qn silica units on the basis of previous literature. Calibration curves were then determined for two different samples. An evaluation of the kinetics of departure of sulphate could thus be made as a function of the viscosity of the borosilicate glass, showing that the kinetics were controlled by the diffusion of sulphate and its volatilization from the melt. This experimental method allows in situ measurements of sulphate content at high temperature which cannot be obtained by any other simple technique. (authors)

  20. Assessment of Savannah River borosilicate glass in the repository environment

    International Nuclear Information System (INIS)

    Plodinec, M.J.; Wicks, G.G.; Bibler, N.E.

    1982-04-01

    Since 1973, borosilicate glass has been studied as a matrix for the immobilization of high-level radioactive waste generated at the Savannah River Plant (SRP). In 1977, efforts began to develop and test the large-scale equipment necessary to convert the alkaline waste slurries at SRP into a durable borosilicate glass. A process has now been developed for the proposed Defense Waste Processing Facility (DWPF) which will annually produce approximately 500 canisters of SRP waste glass which will be stored on an interim basis on the Savannah River site. Current national policy calls for the permanent disposal of high-level waste in deep geologic repositories. In the repository environment, SRP waste glass will eventually be exposed to such stresses as lithostatic or hydrostatic pressures, radiation fields, and self-heating due to radioactive decay. In addition, producing and handling each canister of glass will also expose the glass to thermal and mechanical stresses. An important objective of the extensive glass characterization and testing programs of the Savannah River Laboratory (SRL) has been to determine how these stresses affect the performance of SRP waste glass. The results of these programs indicate that: these stresses will not significantly affect the performance of borosilicate glass containing SRP waste; and SRP waste glass will effectively immobilize hazardous radionuclides in the repository environment

  1. Enhancement of thermal neutron shielding of cement mortar by using borosilicate glass powder.

    Science.gov (United States)

    Jang, Bo-Kil; Lee, Jun-Cheol; Kim, Ji-Hyun; Chung, Chul-Woo

    2017-05-01

    Concrete has been used as a traditional biological shielding material. High hydrogen content in concrete also effectively attenuates high-energy fast neutrons. However, concrete does not have strong protection against thermal neutrons because of the lack of boron compound. In this research, boron was added in the form of borosilicate glass powder to increase the neutron shielding property of cement mortar. Borosilicate glass powder was chosen in order to have beneficial pozzolanic activity and to avoid deleterious expansion caused by an alkali-silica reaction. According to the experimental results, borosilicate glass powder with an average particle size of 13µm showed pozzolanic activity. The replacement of borosilicate glass powder with cement caused a slight increase in the 28-day compressive strength. However, the incorporation of borosilicate glass powder resulted in higher thermal neutron shielding capability. Thus, borosilicate glass powder can be used as a good mineral additive for various radiation shielding purposes. Copyright © 2017 Elsevier Ltd. All rights reserved.

  2. Radiation response of cubic mesoporous silicate and borosilicate thin films

    Science.gov (United States)

    Manzini, Ayelén; Alurralde, Martín; Luca, Vittorio

    2018-01-01

    The radiation response has been studied of cubic mesoporous silicate and borosilicate thin films having different boron contents prepared using the block copolymer template Brij 58 and the dip coating technique. The degree of pore ordering of the films was analysed using low-angle X-ray diffraction and film thickness measured by X-ray reflectivity. For films calcined at 350 °C, the incorporation of boron resulted in a reproducible oscillatory variation in the d-spacing and intensity of the primary reflection as a function of boron content. A clear peak was observed in the d-spacing at 5-10 mol% boron incorporation. For borosilicate films of a given composition an overall suppression of d-spacing was observed as a function of aging time relative to films that did not contain boron. This was ascribed to a slow condensation process. The films were irradiated in pile with neutrons and with iodine ions at energies of 180 keV and 70 MeV. Neutron irradiation of the silicate thin films for periods up to 30 days and aged for 400 days resulted in little reduction in either d-spacing or intensity of the primary low-angle X-ray reflection indicating that the films retained their mesopore ordering. In contrast borosilicate films for which the B (n, α) reaction was expected to result in enhanced displacement damage showed much larger variations in X-ray parameters. For these films short irradiation times resulted in a reduction of the d-spacing and intensity of the primary reflections considerably beyond that observed through aging. It is concluded that prolonged neutron irradiation and internal α irradiation have only a small, although measurable, impact on mesoporous borosilicate thin films increasing the degree of condensation and increasing unit cell contraction. When these borosilicate films were irradiated with iodine ions, more profound changes occurred. The pore ordering of the films was significantly degraded when low energy ions were used. In some cases the degree

  3. Understanding the structural drivers governing glass-water interactions in borosilicate based model bioactive glasses.

    Science.gov (United States)

    Stone-Weiss, Nicholas; Pierce, Eric M; Youngman, Randall E; Gulbiten, Ozgur; Smith, Nicholas J; Du, Jincheng; Goel, Ashutosh

    2018-01-01

    The past decade has witnessed a significant upsurge in the development of borate and borosilicate based resorbable bioactive glasses owing to their faster degradation rate in comparison to their silicate counterparts. However, due to our lack of understanding about the fundamental science governing the aqueous corrosion of these glasses, most of the borate/borosilicate based bioactive glasses reported in the literature have been designed by "trial-and-error" approach. With an ever-increasing demand for their application in treating a broad spectrum of non-skeletal health problems, it is becoming increasingly difficult to design advanced glass formulations using the same conventional approach. Therefore, a paradigm shift from the "trial-and-error" approach to "materials-by-design" approach is required to develop new-generations of bioactive glasses with controlled release of functional ions tailored for specific patients and disease states, whereby material functions and properties can be predicted from first principles. Realizing this goal, however, requires a thorough understanding of the complex sequence of reactions that control the dissolution kinetics of bioactive glasses and the structural drivers that govern them. While there is a considerable amount of literature published on chemical dissolution behavior and apatite-forming ability of potentially bioactive glasses, the majority of this literature has been produced on silicate glass chemistries using different experimental and measurement protocols. It follows that inter-comparison of different datasets reveals inconsistencies between experimental groups. There are also some major experimental challenges or choices that need to be carefully navigated to unearth the mechanisms governing the chemical degradation behavior and kinetics of boron-containing bioactive glasses, and to accurately determine the composition-structure-property relationships. In order to address these challenges, a simplified

  4. Low Velocity Sphere Impact of a Borosilicate Glass

    Energy Technology Data Exchange (ETDEWEB)

    Morrissey, Timothy G [ORNL; Ferber, Mattison K [ORNL; Wereszczak, Andrew A [ORNL; Fox, Ethan E [ORNL

    2012-05-01

    This report summarizes US Army TARDEC sponsored work at Oak Ridge National Laboratory (ORNL) involving low velocity (< 30 m/s or < 65 mph) ball impact testing of Borofloat borosilicate glass, and is a follow-up to a similar study completed by the authors on Starphire soda-lime silicate glass last year. The response of the borosilicate glass to impact testing at different angles was also studied. The Borofloat glass was supplied by the US Army Research Laboratory and its tin-side was impacted or indented. The intent was to better understand low velocity impact response in the Borofloat. Seven sphere materials were used whose densities bracket that of rock: borosilicate glass, soda-lime silicate glass, silicon nitride, aluminum oxide, zirconium oxide, carbon steel, and a chrome steel. A gas gun or a ball-drop test setup was used to produce controlled velocity delivery of the spheres against the glass tile targets. Minimum impact velocities to initiate fracture in the Borofloat were measured and interpreted in context to the kinetic energy of impact and the elastic property mismatch between the seven sphere-Borofloat-target combinations. The primary observations from this low velocity (< 30 m/s or < 65 mph) testing were: (1) BS glass responded similarly to soda-lime silicate glass when spherically indented but quite differently under sphere impact conditions; (2) Frictional effects contributed to fracture initiation in BS glass when it spherically indented. This effect was also observed with soda-lime silicate glass; (3) The force necessary to initiate fracture in BS glass under spherical impact decreases with increasing elastic modulus of the sphere material. This trend is opposite to what was observed with soda-lime silicate glass. Friction cannot explain this trend and the authors do not have a legitimate explanation for it yet; (4) The force necessary to initiate contact-induced fracture is higher under dynamic conditions than under quasi-static conditions. That

  5. Alteration of borosilicate glass under water saturated condition

    International Nuclear Information System (INIS)

    Tsukimura, K.; Matsuhisa, Y.; Kanai, Y.; Hirai, H.

    1991-01-01

    In the long term of the high-level nuclear waste disposal, the dissolving rates of radionuclides from the waste will be controlled by crystalline phases secondarily formed in the borosilicate glass by reaction with ground water. We have determined the crystalline phases formed from borosilicate glass in a hydrothermal experiment. Borosilicate glass powder (50 mg, Si 40 B 20 Al 4 Li 12 Na 14 K 3 Ca 2 Fe 5 O 140 ) and 200 ml of water were reacted at 300degC and 300 bars for 2 weeks with a cold-seal type hydrothermal high pressure apparatus. After the reaction the liquid phase was analyzed with atomic absorption spectroscopy and the solid phases with x-ray powder diffraction and analytical electron microscopy. The liquid phase contains 58 % of Na, 14 % of Li and 11 % of K but less than 1 % of Ca and Fe. The solid phases were found to be zeolite and smectite. The zeolite is isostructural with analcime Na 2 Al 2 (SiO 3 ) 4 · 2H 2 O or wairakite CaAl 2 (SiO 3 ) 4 · 2H 2 O and contains Ca and Si as major constituents but does not contain Al. Although no direct analytical evidence is available, logical induction of the experimental results indicates that the chemical composition of the zeolite is CaB 2 (SiO 3 ) 4 . The remaining x-ray powder diffraction peaks are same as those of smectite Na 06.7 (Al 3.33 Mg 0.67 )Si 8 O 20 (OH) 4 . However, since our starting material was free of Mg, and Na was not detected by AEM, the smectite may contain Fe instead of Mg, and Li instead of Na. (author)

  6. Magnetic Glass Ceramics by Sintering of Borosilicate Glass and Inorganic Waste

    Directory of Open Access Journals (Sweden)

    Inès M. M. M. Ponsot

    2014-07-01

    Full Text Available Ceramics and glass ceramics based on industrial waste have been widely recognized as competitive products for building applications; however, there is a great potential for such materials with novel functionalities. In this paper, we discuss the development of magnetic sintered glass ceramics based on two iron-rich slags, coming from non-ferrous metallurgy and recycled borosilicate glass. The substantial viscous flow of the glass led to dense products for rapid treatments at relatively low temperatures (900–1000 °C, whereas glass/slag interactions resulted in the formation of magnetite crystals, providing ferrimagnetism. Such behavior could be exploited for applying the obtained glass ceramics as induction heating plates, according to preliminary tests (showing the rapid heating of selected samples, even above 200 °C. The chemical durability and safety of the obtained glass ceramics were assessed by both leaching tests and cytotoxicity tests.

  7. Development of Composite Materials Under Ecological Aspects as Recycling Concept For Borosilicate Glass Containing Iron Slags

    International Nuclear Information System (INIS)

    Khalil, T.K.; Bossert, J.; Aly, H.F.; Bossert, J.

    1999-01-01

    Composite concept in materials science can be conveniently applied in the waste treatment technology to construct specific t ailor made c omposite materials, in which at least one of the phases is built by the waste material. In this work the applicability of this concept for the fixation and recycling of slags wastes is done, whereby different mixtures of blast furnace slags are mixed with two different borosilicate glasses, which serve as matrix material. Thermal behaviour of the produced compacts were studied. Both melting and powder technology are applied for the fabrication of dense products. The microstructure of sintered samples is investigated by electron microscopy. The mechanical properties such as hardness and fracture toughness are determined by a Vickers technique. An improvement of the fracture toughness of more than 50% over the value for the original glass VG 98 is achieved by slag addition

  8. Quantitative estimation of electro-osmosis force on charged particles inside a borosilicate resistive-pulse sensor.

    Science.gov (United States)

    Ghobadi, Mostafa; Yuqian Zhang; Rana, Ankit; Esfahani, Ehsan T; Esfandiari, Leyla

    2016-08-01

    Nano and micron-scale pore sensors have been widely used for biomolecular sensing application due to its sensitive, label-free and potentially cost-effective criteria. Electrophoretic and electroosmosis are major forces which play significant roles on the sensor's performance. In this work, we have developed a mathematical model based on experimental and simulation results of negatively charged particles passing through a 2μm diameter solid-state borosilicate pore under a constant applied electric field. The mathematical model has estimated the ratio of electroosmosis force to electrophoretic force on particles to be 77.5%.

  9. Fabrication of Silicon Nitride Dental Core Ceramics with Borosilicate Veneering material

    Energy Technology Data Exchange (ETDEWEB)

    Wananuruksawong, R; Jinawath, S; Wasanapiarnpong, T [Research Unit of Advanced Ceramic, Department of Materials Science, Faculty of Science, Chulalongkorn University, Bangkok (Thailand); Padipatvuthikul, P, E-mail: raayaa_chula@hotmail.com [Faculty of Dentistry, Srinakharinwirot University, Bangkok (Thailand)

    2011-10-29

    Silicon nitride (Si{sub 3}N{sub 4}) ceramic is a great candidate for clinical applications due to its high fracture toughness, strength, hardness and bio-inertness. This study has focused on the Si{sub 3}N{sub 4} ceramic as a dental core material. The white Si{sub 3}N{sub 4} was prepared by pressureless sintering at relative low sintering temperature of 1650 deg. C in nitrogen atmosphere. The coefficient of thermal expansion (CTE) of Si{sub 3}N{sub 4} ceramic is lower than that of Zirconia and Alumina ceramic which are popular in this field. The borosilicate glass veneering was employed due to its compatibility in thermal expansion. The sintered Si{sub 3}N{sub 4} specimens represented the synthetic dental core were paintbrush coated by a veneer paste composed of borosilicate glass powder (<150 micrometer, Pyrex) with 5 wt% of zirconia powder (3 wt% Y{sub 2}O{sub 3} - partial stabilized zirconia) and 30 wt% of polyvinyl alcohol (5 wt% solution). After coating the veneer on the Si{sub 3}N{sub 4} specimens, the firing was performed in electric tube furnace between 1000-1200 deg. C. The veneered specimens fired at 1100 deg. C for 15 mins show good bonding, smooth and glossy without defect and crazing. The veneer has thermal expansion coefficient as 3.98x10{sup -6} deg. C{sup -1}, rather white and semi opaque, due to zirconia addition, the Vickers hardness as 4.0 GPa which is closely to the human teeth.

  10. Réduction des vibrations de structures composites complexes par dispositifs piézoélectriques shuntés : application aux aubes de turbomachines

    OpenAIRE

    Thierry , Olivier

    2016-01-01

    This thesis concerns the vibration reduction in the low frequency range of a composite fan blade of a turbojet engine with piezoelectric devices. The interest is to increase lifespan and avoid flutter phenomena by reducing the vibration amplitude. The purpose of this thesis is to study several shunted piezoelectric devices, in the low frequency range, that can be applied to a woven composite turbojet fan blade. The targeted applications are the LEAP fan blades or the “open-rotor” fan blade, b...

  11. Design and test of the borosilicate glass burnable poison rod for Qinshan nuclear power plant core

    International Nuclear Information System (INIS)

    Huang Jinhua; Sun Hanhong

    1988-08-01

    Material for the burnable poison of Qinshan Nuclear Power Plant core is GG-17 borosilicate glass. The chemical composition and physico-chemical properties of GG-17 is very close to Pyrex-7740 glass used by Westinghouse. It is expected from the results of the experiments that the borosilicate glass burnable poison rod can be successfully used in Qinshan Nuclear Power Plant due to good physical, mechanical, corrosion-resistant and irradiaton properties for both GG-17 glass and cold-worked stainless steel cladding. Change of material for burnable poison from boron-bearing stainless steel to borosilicate glass will bring about much more economic benefit to Qinshan Naclear Power Plant

  12. Stress corrosion in a borosilicate glass nuclear wasteform

    International Nuclear Information System (INIS)

    Ringwood, A.E.; Willis, P.

    1984-01-01

    The authors discuss a typical borosilicate glass wasteform which, when exposed to water vapour and water for limited periods, exhibits evidence of stress corrosion cracking arising from the interaction of polar OH groups with stressed glass surfaces. Glass wasteforms may experience similar stress corrosion cracking when buried in a geological repository and exposed to groundwaters over an extended period. This would increase the effective surface areas available for leaching by groundwater and could decrease the lifetime of the wasteform. Conventional leach-testing methods are insensitive to the longer-term effects of stress corrosion cracking. It is suggested that specific fracture-mechanics tests designed to evaluate susceptibility to stress corrosion cracking should be used when evaluating the wasteforms for high-level nuclear wastes. (author)

  13. Electron irradiation induced nanocrystal formation in Cu-borosilicate glass

    Energy Technology Data Exchange (ETDEWEB)

    Sabri, Mohammed Mohammed; Möbus, Günter, E-mail: g.moebus@sheffield.ac.uk [University of Sheffield, Department of Materials Science and Engineering (United Kingdom)

    2016-03-15

    Nanoscale writing of Cu nanoparticles in glasses is introduced using focused electron irradiation by transmission electron microscopy. Two types of copper borosilicate glasses, one with high and another with low Cu loading, have been tested at energies of 200–300 keV, and formation of Cu nanoparticles in a variety of shapes and sizes using different irradiation conditions is achieved. Electron energy loss spectroscopy analysis, combined with high-resolution transmission electron microscopy imaging, confirmed the irradiation-induced precipitated nanoparticles as metallic, while furnace annealing of the glass triggered dendrite-shaped particles of copper oxide. Unusual patterns of nanoparticle rings and chains under focused electron beam irradiation are also presented. Conclusively, electron beam patterning of Cu-loaded glasses is a promising alternative route to well-established femtosecond laser photoreduction of Cu ions in glass.

  14. Viscosity of melts in the sodium borosilicate system

    International Nuclear Information System (INIS)

    Tait, J.C.; Mandolesi, D.L.; Rummens, H.E.C.

    1984-01-01

    The viscosities of a series of glasses in the sodium borosilicate system (5-35Na 2 O, 5-35B 2 O 3 , 45-80SiO 2 mol%) have been determined between 950 and 1500 deg C, using a rotating bob viscometer. A simplex lattice experimental design was used to define a series of compositions suitable for numerical analysis of the data. The viscosity data were fitted using the Fulcher equation for each composition. Nonlinear regression analysis of the viscosities at constant temperatures gave expressions for the variation in viscosity as a function of composition. The results are displayed as isoviscosity contours on the Na 2 O-B 2 O 3 -SiO 2 composition diagram. The viscosity behaviour as a function of composition is discussed in terms of structural bonding in the melt. (author)

  15. Electrical conductivity and viscosity of borosilicate glasses and melts

    DEFF Research Database (Denmark)

    Ehrt, Doris; Keding, Ralf

    2009-01-01

    , 0 to 62·5 mol% B2O3, and 25 to 85 mol% SiO2. The glass samples were characterised by different methods. Refractive indices, density and thermal expansion were measured. Phase separation effects were investigated by electron microscopy. The electrical conductivity of glasses and melts were determined......Simple sodium borosilicate and silicate glasses were melted on a very large scale (35 l Pt crucible) to prepare model glasses of optical quality in order to investigate various properties depending on their structure. The composition of the glass samples varied in a wide range: 3 to 33·3 mol% Na2O...... by impedance measurements in a wide temperature range (250 to 1450°C). The activation energies were calculated by Arrhenius plots in various temperature regions: below the glass transition temperature, Tg, above the melting point, Tl, and between Tg and Tl. Viscosity measurements were carried out...

  16. Commercial Ion Exchange Resin Vitrification in Borosilicate Glass

    International Nuclear Information System (INIS)

    Cicero-Herman, C.A.; Workman, P.; Poole, K.; Erich, D.; Harden, J.

    1998-05-01

    Bench-scale studies were performed to determine the feasibility of vitrification treatment of six resins representative of those used in the commercial nuclear industry. Each resin was successfully immobilized using the same proprietary borosilicate glass formulation. Waste loadings varied from 38 to 70 g of resin/100 g of glass produced depending on the particular resin, with volume reductions of 28 percent to 68 percent. The bench-scale results were used to perform a melter demonstration with one of the resins at the Clemson Environmental Technologies Laboratory (CETL). The resin used was a weakly acidic meth acrylic cation exchange resin. The vitrification process utilized represented a approximately 64 percent volume reduction. Glass characterization, radionuclide retention, offgas analyses, and system compatibility results will be discussed in this paper

  17. Photon emission induced by brittle fracture of borosilicate glasses

    Energy Technology Data Exchange (ETDEWEB)

    Shiota, Tadashi, E-mail: tshiota@ceram.titech.ac.jp [Department of Metallurgy and Ceramic Science, Tokyo Institute of Technology, 2-12-1 Ookayama, Meguro-ku, Tokyo 152-8550 (Japan); Sato, Yoshitaka [Department of Metallurgy and Ceramic Science, Tokyo Institute of Technology, 2-12-1 Ookayama, Meguro-ku, Tokyo 152-8550 (Japan); Kishi, Tetsuo [Department of Chemistry and Materials Science, Tokyo Institute of Technology, 2-12-1 Ookayama, Meguro-ku, Tokyo 152-8550 (Japan); Yasuda, Kouichi [Department of Metallurgy and Ceramic Science, Tokyo Institute of Technology, 2-12-1 Ookayama, Meguro-ku, Tokyo 152-8550 (Japan)

    2016-05-15

    Photon emission (PE) at wavelength ranges of 430–490 nm (B-PE), 500–600 nm (G-PE) and 610–680 nm (R-PE) caused by brittle fracture was simultaneously measured in the nanosecond-to-microsecond and millisecond time domains for two types of borosilicate glasses: Pyrex-type Tempax glass and BK7 glass. The results were compared to those for silica and soda lime glasses. The time dependence of the PE of Tempax glass was similar to that of silica glass, while the PE intensity was lower. Because Tempax glass contains both silica-rich and borate-rich amorphous phases, the PE must be mainly produced by the fracture of the silica-rich phase. Moreover, the proportion of B-PE of Tempax glass was higher than that of silica glass. This suggests that the measured B-PE might also include very weak PE caused by the fracture of the borate-rich phase. The PE time dependence of BK7 glass was similar to that of soda lime glass, which was different from the case for Tempax glass. The PE intensity of BK7 glass was slightly higher than that of soda lime glass, but much lower than that of Tempax glass. The result indicates that non-bridging oxygen in the glasses affects crack propagation behavior and reduces the PE. - Highlights: • Photon emission (PE) upon brittle fracture of borosilicate glasses was measured. • Pyrex-type Tempax and BK7 glasses showed different PE characteristics. • The rupture of Si–O bonds produces much stronger PE than that of B–O bonds. • Non-bridging oxygen in glass affects crack propagation behavior and reduces the PE.

  18. Aux marges du monde arabe

    Directory of Open Access Journals (Sweden)

    Hélène Thiollet

    2004-09-01

    Full Text Available L’étude des migrations contemporaines des Érythréens vers le Yémen au tournant des années quatre-vingt-dix permet d’observer les transformations des dynamiques régionales à l’œuvre dans le monde arabe. Les migrations sont un phénomène sensible aux différents aspects (politiques, économiques, culturels, géographiques de l’intégration régionale. Celle si est envisagée dans cet article à travers une approche doublement marginale : -la marginalité géographique de l’Érythrée arabo-africaine et du Yémen, économi­quement isolé dans la péninsule Arabique, -l’étude des migrations formelles et informelles, élément souvent marginal dans l’étude des institutions et des échanges qui constituent un système régional intégré. Cette étude est fondée sur une série d’entretiens menés au Yémen entre février et avril 2002 auprès des administrations yéménites et de la population érythréenne.

  19. L'adaptation aux changements climatiques

    International Development Research Centre (IDRC) Digital Library (Canada)

    Cathy Egan

    plus équitables et plus prospères. Centre de recherches pour le développement international, CP 8500, Ottawa (Ontario) Canada K1G 3H9. Tél. : 613-236-6163 • Télécopieur : 613-238-7230 • Courriel : info@crdi.ca. L'ADAPTATION AUX. CHANGEMENTS CLIMATIQUES. LE RECOURS AUX. ONDES. Les petits exploitants ...

  20. Some Non-Destructive Testing Methods Applicable to Sintered Materials; Quelques Methodes d'Essais Non Destructifs Applicables aux Materiaux Frittes; Nekotorye metody nedestruktivnykh ispytanii, primenimye k spechennym materialam; Algunos Metodos de Ensayo No Destructivo Aplicables a los Materiales Sinterizados

    Energy Technology Data Exchange (ETDEWEB)

    Labusca, Elena; Mirion, I.; Andreescu, N.; Alecu, M.; Biscoveanu, I. [Institut de Physique Atomique, Bucarest (Romania)

    1965-10-15

    solides frittes, a l'aide de la metallographie et de la microscopie electronique. Ces methodes mettent en evidence l'homogeneite de la structure, les dimensions et l'orientation des grains, la presence de defauts divers (inclusions, pores) et revolution meme du processus de frittage, y compris la formation des cristaux, la croissance granulaire, etc. Dans quelques cas, on peut combiner l'examen microscopique a des essais de microdurete. Cet examen de la structure microcristalline represente l'une des methodes principales de controle qualitatif des materiaux frittes, et ne peut etre remplace par aucun autre moyen d'investigation. 2. Controle du degre de consolidation, qui determine essentiellement la qualite des materiaux frittes. Ce controle est effectue par la mesure de quelques proprietes, telles que la conductibilite electrique et thermique, en correlation avec la densite, etant donne que la conductibilite des materiaux frittes est directement porportionnelle au degre de frittage. On a essaye aussi une methode adequate de controle de la porosite; on a obtenu des donnees experimentales interessantes, surtout au point de vue de la porosite libre, laquelle est susceptible aux inclusions gazeuses. Le memoire contient des donnees experimentales concernant l'application de ces methodes de controle a quelques materiaux frittes interessants pour la technologie nucleaire. (author) [Spanish] Teniendo en cuenta la estructura granular especifica de los materiales sinterizados, elaborados a partir de polvos, cuyo proceso de consolidacion se desarrolla en funcion del tratamiento de sinterizacion, los autores han estudiado algunos metodos para verificar el grado de sinterizacion y controlar ciertas propiedades. Entre los metodos no destructivos utilizados, se mencionan en la presente memoria: 1. Examen de la estructura cristalina de los solidos sinterizados por metalografia y microscopfa electronica. Estos metodos ponen de manifiesto el giado de homogeneidad estructural, la dimension

  1. sup 1 sup 1 B nutation NMR study of powdered borosilicates

    CERN Document Server

    Woo, A J; Han, D Y

    1998-01-01

    In this work, we applied the 1D sup 1 sup 1 B nutation NMR method for the analysis of the local structural environments in powdered borosilicates (SiO sub 2 -B sub 2 O sub 3). Spin dynamics during a rf irradiation for spin I=3/2 was analytically calculated with a density matrix formalism. Spectral simulation programs were written in MATLAB on a PC. Two borosilicates prepared by the sol-gel process at different stabilization temperature were used for the 1D sup 1 sup 1 B nutation NMR experiment. The sup 1 sup 1 B NMR parameters, quadrupole coupling constants (e sup 2 qQ/h) and asymmetry parameters (eta), for each borosilicate were extracted from the nonlinear least-squares fitting. The effects of heat treatments on the local structures of boron sites in borosilicates were discussed.

  2. 1.2. X-ray phase analysis of borosilicate raw material

    International Nuclear Information System (INIS)

    Mirsaidov, U.M.; Kurbonov, A.S.; Mamatov, E.D.

    2015-01-01

    Present article is devoted to X-ray phase analysis of borosilicate raw material. The thermo gram of initial borosilicate ore was considered. The X-ray pattern of initial danburite of Ak-Arhar Deposit was considered as well. The X-ray pattern of danburite of Ak-Arhar Deposit after pre-baking was studied. The X-ray pattern of initial danburite concentrate was studied as well.

  3. 3.6. The kinetics of sulfuric acid decomposition of calcined concentrate of borosilicate ore

    International Nuclear Information System (INIS)

    Mirsaidov, U.M.; Kurbonov, A.S.; Mamatov, E.D.

    2015-01-01

    Present article is devoted to kinetics of sulfuric acid decomposition of calcined concentrate of borosilicate ore. The experimental data of kinetics of extraction of boron oxide from danburite at sulfuric acid decomposition were obtained at 20-90 deg C temperature range and process duration 15-90 minutes. The flowsheet of obtaining of boric acid from borosilicate ores of Ak-Arkhar Deposit by sulfuric acid method was proposed.

  4. Determination of the free enthalpies of formation of borosilicate glasses

    International Nuclear Information System (INIS)

    Linard, Y.

    2000-01-01

    This work contributes to the study of the thermochemical properties of nuclear waste glasses. Results are used to discuss mechanisms and parameters integrated in alteration models of conditioning materials. Glass is a disordered material defined thermodynamically as a non-equilibrium state. Taking into account one order parameter to characterise its configurational state, the metastable equilibrium for the glass was considered and the main thermochemical properties were determined. Calorimetric techniques were used to measure heat capacities and formation enthalpies of borosilicate glasses (from 3 to 8 constitutive oxides). Formation Entropies were measured too, using the entropy theory of relaxation processes proposed by Adam and Gibbs (1965). The configurational entropy contribution were determined from viscosity measurements. This set of data has allowed the calculation of Gibb's free energies of dissolution of glasses in pure water. By comparison with leaching experiments, it has been demonstrated that the decreasing of the dissolution rate at high reaction progress cannot be associated to the approach of an equilibrium between the sound glass and the aqueous solution. The composition changes of the reaction area at the glass surface need to be considered too. To achieve a complete description of the thermodynamic stability, the equilibrium between hydrated de-alkalinized glass and/or the gel layer with the aqueous solution should also be evaluated. (author)

  5. Behaviour of ruthenium dioxide particles in borosilicate glasses and melts

    Energy Technology Data Exchange (ETDEWEB)

    Pflieger, Rachel [DEN/DTCD-SCDV/CEA Valrho, Centre de Marcoule, BP17171, 30207 Bagnols-sur-Ceze (France); Institut de Chimie Separative de Marcoule, UMR5257, Centre de Marcoule, BP17171, 30207 Bagnols-sur-Ceze Cedex (France)], E-mail: rachel_pflieger@yahoo.fr; Lefebvre, Leila [DEN/DTCD-SCDV/CEA Valrho, Centre de Marcoule, BP17171, 30207 Bagnols-sur-Ceze (France); Malki, Mohammed [CNRS/CEMHTI-1D Av. de la Recherche Scientifique, 45701 Orleans cedex 2 (France); Polytech Orleans, Universite d' Orleans, 8 rue Leonard de Vinci, 45072 Orleans cedex 2 (France); Allix, Mathieu [CNRS/CEMHTI-1D Av. de la Recherche Scientifique, 45701 Orleans cedex 2 (France); Grandjean, Agnes [DEN/DTCD-SCDV/CEA Valrho, Centre de Marcoule, BP17171, 30207 Bagnols-sur-Ceze (France); Institut de Chimie Separative de Marcoule, UMR5257, Centre de Marcoule, BP17171, 30207 Bagnols-sur-Ceze Cedex (France)

    2009-06-01

    Ruthenium-glass systems are formed during the vitrification of nuclear waste. They are also widely used in micro-electronics because of their unique electrical properties. However, the interaction of this element with the glass matrix remains poorly understood. This work focuses on a RuO{sub 2} particles-nuclear alumino-borosilicate glass system in which the electrical conductivity is known to vary considerably with the RuO{sub 2} content and to become electronic above about 0.5-0.7 vol.% RuO{sub 2} [R. Pflieger, M. Malki, Y. Guari, J. Larionova, A. Grandjean, J. Am. Ceram. Soc., accepted for publication]. Some RuO{sub 2} segregation was observed in SEM/TEM investigations but no continuous chain of RuO{sub 2} particles could be seen. Electron relays between the particles are then necessary for a low-rate percolation, such as the nanoclusters suggested by Adachi et al. [K. Adachi, S. Iida, K. Hayashi, J. Mater. Res. 9 (7) (1994) 1866; K. Adachi, H. Kuno, J. Am. Ceram. Soc. 83 (10) (2000) 2441], which could consist in dissolved ruthenium. Indeed, several observations made here clearly indicate the presence of dissolved ruthenium in the glass matrix, like the modification of the glass density in presence of RuO{sub 2} particles or the diffusion-limited growth of RuO{sub 2} particles in the melt.

  6. Thorium reactions in borosilicate-glass/water systems

    International Nuclear Information System (INIS)

    Rai, D.; Hess, N.J.; Felmy, A.R.; Moore, D.A.; Yui, M.

    2005-01-01

    Studies were conducted on the dissolution of Th-doped borosilicate glass, a complex assemblage of 24 different elements in various proportions, in a wide range of pH values (0.5 to 12) and carbonate (as high as 6.2 m) and bicarbonate (as high as 1.0 m) concentrations, and as a function of time to determine whether the observed thorium concentrations exhibit an equilibrium phenomenon and to ascertain whether existing thermodynamic data can be used to interpret these results. Measurable Th concentrations were observed in either the very acidic (pH 0.5 to 4) solutions or alkaline solutions containing relatively high carbonate/bicarbonate concentrations. Steady state Th concentrations were reached over time from both the oversaturation and undersaturation directions, indicating that Th concentrations are controlled by an equilibrium solubility phenomenon. The XRD, EXAFS, and thermodynamic analyses of solubility data failed to definitively identify the nature of the solubility-controlling solid in this complex system; however, the data suggests that the solubility-controlling solid most likely involves the Th-silicate phase and that the observed Th concentrations are up to many orders of magnitude lower than in equilibrium with ThO 2 (am). The solubility study also showed that existing thermodynamic data for carbonato complexes of Th can be used to reliably predict Th concentrations in relatively dilute to concentrated carbonate/bicarbonate solutions. (orig.)

  7. Alpha self irradiation effects in nuclear borosilicate glass

    International Nuclear Information System (INIS)

    Peuget, S.; Roudil, D.; Deschanels, X.; Jegou, C.; Broudic, V.; Bart, J.M.

    2004-01-01

    The properties of actinide glasses are studied in the context of high-level waste management programs. Reprocessing high burnup fuels in particular will increase the minor actinide content in the glass package, resulting in higher cumulative alpha decay doses in the glass, and raising the question of the glass matrix behavior and especially its containment properties. The effect of alpha self-irradiation on the glass behavior is evaluated by doping the glass with a short-lived actinide ( 244 Cm) to reach in several years the alpha dose received by the future glass packages over several thousand years. 'R7T7' borosilicate glasses were doped with 3 different curium contents (0.04, 0.4 and 1.2 wt% 244 CmO 2 ). The density and mechanical properties of the curium-doped glasses were characterized up to 2. 10 18 α/g, revealing only a slight evolution of the macroscopic behavior of R7T7 glass in this range. The leaching behavior of curium-doped glass was also studied by Soxhlet tests. The results do not show any significant evolution of the initial alteration rate with the alpha dose. (authors)

  8. Dynamic fracture and fragmentation patterns of borosilicate laminate glasses

    Directory of Open Access Journals (Sweden)

    Gómez del Río, T.

    2009-10-01

    Full Text Available The dynamic behaviour of laminate borosilicate glasses (BSG with polyvinylbutiral (PVB interfaces (0,38 mm located at different distances from the impact point have been studied and compared with monolithic glass. The mechanical behaviour under impact loads have been studied using a compression split Hopkinson pressure bar (SHPB. In these experiments, the stress-strain curves of the materials at high loading rates and the capability of transmitting and reflecting the impact energy have been determined. The influence of the position of the interface on the fragmentation statistics of the SHPB recovered fragments has also been considered and analysed according to the published theoretical models.

    En este trabajo se ha estudiado los comportamientos dinámicos de un vidrio monolítico de borosilicato y varios laminados de cristal de borosilicato (BSG con intercaras de polyvinylbutiral (PVB (0,38 mm situados a diferentes distancias respecto del punto de impacto. Los resultados de las diferentes configuraciones de laminados se han comparado con el vidrio monolítico. El comportamiento mecánico bajo cargas de impacto se han estudiado realizando ensayos de compresión con una barra Hopkinson (SHPB. A partir de estos experimentos se obtienen las curvas tensión-deformación de los materiales a altas velocidades de carga y su capacidad de transmitir y reflejar la energía del impacto. La influencia de la posición de la interfaz en las estadísticas de la fragmentación de los fragmentos recuperados también se ha considerado y analizado de acuerdo a los modelos teóricos publicados.

  9. Bourse du CRDI aux chercheurs candidats au doctorat 2017 | CRDI ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Cet appel à propositions s'adresse aux citoyens canadiens, aux résidents permanents du Canada et aux citoyens de pays en développement inscrits au doctorat dans une université canadienne. Qui peut présenter une demande. Pour être admissible, vous devez remplir les conditions suivantes : Être citoyen canadien ou ...

  10. Borosilicate glass as a matrix for the immobilization of Savannah River Plant waste

    International Nuclear Information System (INIS)

    Plodinec, M.J.; Wicks, G.G.; Bibler, N.E.

    1982-01-01

    The reference waste form for immobilization of Savannah River Plant (SRP) waste is borosilicate glass. In the reference process, waste is mixed with glass-forming chemicals and melted in a Joule-heated ceramic melter at 1150 0 C. Waste glass made with actual or simulated waste on a small scale and glass made with simulated waste on a large scale confirm that the current reference process and glass-former composition are able to accommodate all SRP waste compositions and can produce a glass with: high waste loading; low leach rates; good thermal stability; high resistance to radiation effects; and good impact resistance. Borosilicate glass has been studied as a matrix for the immobilization of SRP waste since 1974. This paper reviews the results of extensive characterization and performance testing of the glass product. These results show that borosilicate glass is a very suitable matrix for the immobilization of SRP waste. 18 references, 3 figures, 10 tables

  11. Local structure near actinides and nucleating elements in borosilicate glass for nuclear industry: Results of X-ray absorption spectroscopy

    International Nuclear Information System (INIS)

    Petit-Maire, D.

    1988-01-01

    Possibilities and limits of X-ray absorption spectroscopy for cation site description in silicate glasses and possible applications for complex glasses, like glass for fission product containment, are examined. In borosilicate glasses two types of sites are evidenced for actinides at the valence 4: Coordinance 6 sites with a narrow radial distribution for the distance An-0; higher coordination (7, 8 or more) with a wider and asymmetrical radial distribution. Proportion of low coordinance sites increases when cation size decreases (Th > Np). U and Np VI and V are characterized as actinyles with a chain 0-An-0 practically linear, coordinance in a plane perpendicular to this complex is probably 5. X-ray absorption spectroscopy allows an accurate description of actinide sites in fission product glasses [fr

  12. Safety Training: Sensibilisation aux gestes et postures de travail

    CERN Multimedia

    Laetitia Laddada

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt.Nous vous proposons un nouveau cours de sécurité lié aux manutentions manuelles (durée 1 jour) : Sensibilisation aux gestes et postures de travail. Si vous êtes amené à manipuler régulièrement des charges lourdes ou volumineuses, cette formation peut vous aider à prévenir les lésions musculaires ou dorsales. A l'issue de cette formation, vous serez capable d'adopter et d'appliquer les principes de base de sécurité physique et d'&e...

  13. How Molecular Evolution Technologies can Provide Bespoke Industrial Enzymes: Application to Biofuels Comment les technologies d’évolution moléculaire peuvent fournir des enzymes industrielles sur mesure : application aux biocarburants

    Directory of Open Access Journals (Sweden)

    Fourage L.

    2013-08-01

    est l’un des principaux goulets d’étranglement dans le développement de la conversion biologique de la biomasse lignocellulosique en biocarburants. L’un des organismes les plus efficaces pour la production d’enzymes cellulolytiques est le champignon Trichoderma reesei, principalement grâce à sa capacité importante de sécrétion. La conversion de la cellulose en glucose implique trois types de cellulases travaillant en synergie : les endoglucanases (EC 3.2.1.4 clivant de façon aléatoire les liaisons glycosidiques en (3-1,4, les cellobiohydrolases (EC 3.2.1.91 attaquant la chaîne de cellulose aux deux extrémités afin de produire le cellobiose, dimère qui sera converti en glucose par l’action des (3-glucosidases (EC 3.2.1.21. De façon inattendue, la quantité de 3-glucosidase (BGL1 sécrétée par les souches de T. reesei représente un très faible pourcentage de la quantité totale des protéines sécrétées qui en fait donc une activité limitante du cocktail. Cette faible activité limite d’autant plus les performances du cocktail que le cellobiose représente le principal inhibiteur de la réaction cellulolyse par les cellobiohydrolases. Ce goulot d’étranglement peut être atténué soit par une surexpression de la (3-glucosidase chez T. reesei, soit par une amélioration de son activité spécifique. Après un bref aperçu des principales technologies existantes, cet exemple sera utilisé dans cette revue pour illustrer le potentiel des technologies d’évolution dirigée pour développer des enzymes répondant aux besoins de l’industrie des biotechnologies. Nous décrivons comment la mise en oeuvre d’une stratégie d’évolution dirigée par le L-ShufflingTM avec trois gènes parentaux provenant de la biodiversité microbienne permet d’obtenir des activités (3-glucosidases très améliorées par rapport à la Cel3a (3-glucosidase de T. reesei (activité spécifique 242 fois plus élevée pour le substrat pNPGIc. Cette am

  14. Evaluation of uncertainties of key neutron parameters of PWR-type reactors with slab fuel, application to neutronic conformity; Determination des incertitudes liees aux grandeurs neutroniques d'interet des reacteurs a eau pressurisee a plaques combustibles et application aux etudes de conformite

    Energy Technology Data Exchange (ETDEWEB)

    Bernard, D

    2001-12-01

    The aim of this thesis was to evaluate uncertainties of key neutron parameters of slab reactors. Uncertainties sources have many origins, technologic origin for parameters of fabrication and physical origin for nuclear data. First, each contribution of uncertainties is calculated and finally, a factor of uncertainties is associated to key slab parameter like reactivity, isotherm reactivity coefficient, control rod efficiency, power form factor before irradiation and life-time. This factors of uncertainties were computed by Generalized Perturbations Theory in case of step 0 and by directs calculations in case of irradiation problems. One of neutronic conformity applications was about fabrication and nuclear data targets precision adjustments. Statistic (uncertainties) and deterministic (deviations) approaches were studied. Then, neutronics key slab parameters uncertainties were reduced and so nuclear performances were optimized. (author)

  15. Evaluation of uncertainties of key neutron parameters of PWR-type reactors with slab fuel, application to neutronic conformity; Determination des incertitudes liees aux grandeurs neutroniques d'interet des reacteurs a eau pressurisee a plaques combustibles et application aux etudes de conformite

    Energy Technology Data Exchange (ETDEWEB)

    Bernard, D

    2001-12-01

    The aim of this thesis was to evaluate uncertainties of key neutron parameters of slab reactors. Uncertainties sources have many origins, technologic origin for parameters of fabrication and physical origin for nuclear data. First, each contribution of uncertainties is calculated and finally, a factor of uncertainties is associated to key slab parameter like reactivity, isotherm reactivity coefficient, control rod efficiency, power form factor before irradiation and life-time. This factors of uncertainties were computed by Generalized Perturbations Theory in case of step 0 and by directs calculations in case of irradiation problems. One of neutronic conformity applications was about fabrication and nuclear data targets precision adjustments. Statistic (uncertainties) and deterministic (deviations) approaches were studied. Then, neutronics key slab parameters uncertainties were reduced and so nuclear performances were optimized. (author)

  16. Conceptual waste package interim product specifications and data requirements for disposal of borosilicate glass defense high-level waste forms in salt geologic repositories

    International Nuclear Information System (INIS)

    1983-06-01

    The conceptual waste package interim product specifications and data requirements presented are applicable specifically to the normal borosilicate glass product of the Defense Waste Processing Facility (DWPF). They provide preliminary numerical values for the defense high-level waste form parameters and properties identified in the waste form performance specification for geologic isolation in salt repositories. Subject areas treated include containment and isolation, operational period safety, criticality control, waste form/production canister identification, and waste package performance testing requirements. This document was generated for use in the development of conceptual waste package designs in salt. It will be revised as additional data, analyses, and regulatory requirements become available

  17. Preparation and nonlinear optical properties of indium nanocrystals in sodium borosilicate glass by the sol–gel route

    International Nuclear Information System (INIS)

    Zhong, Jiasong; Xiang, Weidong; Zhao, Haijun; Chen, Zhaoping; Liang, Xiaojuan; Zhao, Wenguang; Chen, Guoxin

    2012-01-01

    Graphical abstract: The sodium borosilicate glass doped with indium nanocrystals have been successfully prepared by sol–gel methods. And the indium nanocrystals in tetragonal crystal system have formed uniformly in the glass, and the average diameter of indium nanocrystals is about 30 nm. The third-order optical nonlinear refractive index γ, absorption coefficient β, and susceptibility χ (3) of the glass are determined to be −4.77 × 10 −16 m 2 /W, 2.67 × 10 −9 m/W, and 2.81 × 10 −10 esu, respectively. Highlights: ► Indium nanocrystals embedded in glass matrix have been prepared by sol–gel route. ► The crystal structure and composition are investigated by XRD and XPS. ► Size and distribution of indium nanocrystals is determined by TEM. ► The third-order optical nonlinearity is investigated by using Z-scan technique. -- Abstract: The sodium borosilicate glass doped with indium nanocrystals have been successfully prepared by sol–gel route. The thermal stability behavior of the stiff gel is investigated by thermogravimetric (TG) and differential thermal (DTA) analysis. The crystal structure of the glass is characterized by X-ray powder diffraction (XRD). Particle composition is determined by X-ray photoelectron spectroscopy (XPS). Size and distribution of the nanocrystals are characterized by transmission electron microscopy (TEM) as well as high-resolution transmission electron microscopy (HRTEM). Results show that the indium nanocrystals in tetragonal crystal structure have formed in glass, and the average diameter is about 30 nm. Further, the glass is measured by Z-scan technique to investigate the nonlinear optical (NLO) properties. The third-order NLO coefficient χ (3) of the glass is determined to be 2.81 × 10 −10 esu. The glass with large third-order NLO coefficient is promising materials for applications in optical devices.

  18. Basaltic glasses from Iceland and the deep sea: Natural analogues to borosilicate nuclear waste-form glass

    International Nuclear Information System (INIS)

    Jercinovic, M.J.; Ewing, R.C.

    1987-12-01

    The report provides a detailed analysis of the alteration process and products for natural basaltic glasses. Information of specific applicability to the JSS project include: * The identification of typical alteration products which should be expected during the long-term corrosion process of low-silica glasses. The leached layers contain a relatively high proportion of crystalline phases, mostly in the form of smectite-type clays. Channels through the layer provide immediate access of solutions to the fresh glass/alteration layer interface. Thus, glasses are not 'protected' from further corrosion by the surface layer. * Corrosion proceeds with two rates - an initial rate in silica-undersaturated environments and a long-term rate in silica-saturated environments. This demonstrates that there is no unexpected change in corrosion rate over long periods of time. The long-term corrosion rate is consistent with that of borosilicate glasses. * Precipitation of silica-containing phases can result in increased alteration of the glass as manifested by greater alteration layer thicknesses. This emphasizes the importance of being able to predict which phases form during the reaction sequence. * For natural basaltic glasses the flow rate of water and surface area of exposed glass are critical parameters in minimizing glass alteration over long periods of time. The long-term stability of basalt glasses is enhanced when silica concentrations in solution are increased. In summary, there is considerable agreement between corrosion phenomena observed for borosilicate glasses in the laboratory and those observed for natural basalt glasses of great age. (With 121 refs.) (authors)

  19. Aux origines de la science moderne

    CERN Document Server

    Rossi, Paolo

    1999-01-01

    Aux origines de la science moderne. " Lorsque l'on aborde l'étude d'une pensée qui n'est plus la nôtre, il est important de chercher à oublier ce que nous savons ou croyons savoir. " Pour appréhender cette période fondatrice que fut la Révolution scientifique du XVIIe siècle en Europe, Paolo Rossi nous replonge dans des atmosphères intellectuelles et des modes de pensée depuis longtemps disparus. Des secrets hermétiques aux calculs mathématiques, de la magie au magnétisme et des cabinets de curiosité aux premières académies des sciences défilent ainsi des notions et des individus qui, remis en toute simplicité dans le contexte de leur époque, retrouvent une épaisseur et un sens nouveaux. Ainsi racontée sous la forme d'une histoire des idées, l'histoire des sciences devient accessible à tous.

  20. L'Anse Aux Meadows, Newfoundland

    Science.gov (United States)

    2008-01-01

    L'Anse aux Meadows is a site on the northernmost tip of the island of Newfoundland, located in the Province of Newfoundland and Labrador, Canada, where the remains of a Viking village were discovered in 1960 by the Norwegians Helge and Anne Ingstad. The only authenticated Viking settlement in North America outside Greenland, it was the site of a multi-year archaeological dig that found dwellings, tools and implements that verified its time frame. The settlement, dating more than five hundred years before Christopher Columbus, contains the earliest European structures in North America. Named a World Heritage site by UNESCO, it is thought by many to be the semi-legendary 'Vinland' settlement of explorer Leif Ericson around AD 1000. The settlement at L'Anse aux Meadows consisted of at least eight buildings, including a forge and smelter, and a lumber yard that supported a shipyard. The largest house measured 28.8 by 15.6 m and consisted of several rooms. Sewing and knitting tools found at the site indicate women were present at L'Anse aux Meadows The image was acquired on September 14, 2007, covers an area of 14.2 x 14.6 km, and is located at 51.5 degrees north latitude, 55.6 degrees west longitude. The U.S. science team is located at NASA's Jet Propulsion Laboratory, Pasadena, Calif. The Terra mission is part of NASA's Science Mission Directorate.

  1. Effect of heat treatment duration on phase separation of sodium borosilicate glass, containing copper

    International Nuclear Information System (INIS)

    Shejnina, T.G.; Gutner, S.Kh.; Anan'in, N.I.

    1989-01-01

    The effect of heat treatment duration on phase separation of sodium borosilicate (SBS) glass, containing copper is studied. It is stated that phase separation close to equilibrium one is attained under 12 hours of heat treatment of SBS glass containing copper

  2. X-ray tomography of feed-to-glass transition of simulated borosilicate waste glasses

    Czech Academy of Sciences Publication Activity Database

    Harris, W.H.; Guillen, D.P.; Kloužek, Jaroslav; Pokorný, P.; Yano, T.; Lee, S.; Schweiger, M. J.; Hrma, P.

    2017-01-01

    Roč. 100, č. 9 (2017), s. 3883-3894 ISSN 0002-7820 Institutional support: RVO:67985891 Keywords : borosilicate glass * computed tomography * glass melting * morphology * nuclear waste * X-ray Subject RIV: JH - Ceramics, Fire-Resistant Materials and Glass OBOR OECD: Ceramics Impact factor: 2.841, year: 2016

  3. Evaluation of long-term leaching of borosilicate glass in pure water

    International Nuclear Information System (INIS)

    Lanza, F.; Parnisari, E.

    1979-01-01

    In order to confirm the validity of the model of the dissolving sphere, a series of tests of leaching of borosilicate glasses has been performed. The leaching rate is followed by measurements of weight loss and analysis of the surface composition. An accumulation at the surface of the less soluble cations is observed

  4. X-ray irradiation induced reduction and nanoclustering of lead in borosilicate glass

    NARCIS (Netherlands)

    Stanley, H.B.; Banerjee, D.; Breemen, van L.C.A.; Ciston, J.; Liebscher, C.H.; Martis, V.; Merino, D.H.; Longo, A.; Pattison, P.; Peters, G.W.M.; Portale, G.; Sen, Sabyasachi; Bras, W.

    2014-01-01

    We have studied the formation of nanoparticles in lead sulfide (PbS)-doped borosilicate glass subjected to a two-step nucleation and growth heat treatment using in situ small-angle X-ray scattering (SAXS). The microstructure produced was subsequently characterized using X-ray powder diffraction

  5. Chapter 1. The characteristics of borosilicate ores of Ak-Arkhar Deposit of Tajikistan

    International Nuclear Information System (INIS)

    Mirsaidov, U.M.; Kurbonov, A.S.; Mamatov, E.D.

    2015-01-01

    Present article is devoted to characteristics of borosilicate ores of Ak-Arkhar Deposit of Tajikistan. The chemical composition of danburite ore of Ak-Arkhar Deposit was defined. The chemical composition of danburite ore concentrate of Ak-Arkhar Deposit was defined as well.

  6. Modelling the evaporation of boron species. Part 1: Alkali-free borosilicate glass melts

    NARCIS (Netherlands)

    Limpt, J.A.C. van; Beerkens, R.G.C.; Cook, S.; O'Connor, R.; Simon, J.

    2011-01-01

    A laboratory test facility has been used to measure the boron evaporation rates from borosilicate glass melts. The impact of furnace atmosphere composition and glass melt composition on the temperature dependent boron evaporation rates has been investigated experimentally. In Part 1 of this paper

  7. Development of aluminosilicate and borosilicate glasses as matrices for CANDU high-level waste

    International Nuclear Information System (INIS)

    Strathdee, G.G.; McIntyre, N.S.; Taylor, P.

    1979-01-01

    This paper covers the results of analyses of two radioactive nepheline syenite glass blocks recovered from in-ground leaching experiments at the Chalk River Nuclear Laboratories. Current research on borosilicate glasses for immobilization of high-level waste is also described

  8. Characterization of borosilicate glasses containing simulated high-level radioactive wastes from PNC

    International Nuclear Information System (INIS)

    Terai, R.; Eguchi, K.; Yamanaka, H.

    1979-01-01

    The characterization of borosilicate glasses containing simulated HLW from PNC has been carried out. Phase separation of molybdates, volatilization, viscosity, electrical resistivity, thermal conductivity, elastic modulus, chemical durability, and devitrification of these glasses have been measured, and the suitability of the glasses for the vitrified solidification processes is discussed from the viewpoint of safety

  9. Quantification of the boron speciation in alkali borosilicate glasses by electron energy loss spectroscopy

    DEFF Research Database (Denmark)

    Cheng, D.S.; Yang, G.; Zhao, Y.Q.

    2015-01-01

    developed a method based on electron energy loss spectroscopy (EELS) data acquisition and analyses, which enables determination of the boron speciation in a series of ternary alkali borosilicate glasses with constant molar ratios. A script for the fast acquisition of EELS has been designed, from which...

  10. Integrated Optic Surface Plasmon Resonance Measurements in a Borosilicate Glass Substrate

    Directory of Open Access Journals (Sweden)

    Antonino Parisi

    2008-11-01

    Full Text Available The surface plasmon resonance (SPR technique is a well-known optical method that can be used to measure the refractive index of organic nano-layers adsorbed on a thin metal film. Although there are many configurations for measuring biomolecular interactions, SPR-based techniques play a central role in many current biosensing experiments, since they are the most suited for sensitive and quantitative kinetic measurements. Here we give some results from the analysis and numerical elaboration of SPR data from integrated optics experiments in a particular borosilicate glass, chosen for its composition offering the rather low refractive index of 1.4701 at 633 nm wavelength. These data regard the flow over the sensing region (metal window of different solutions with refractive indexes in the range of interest (1.3÷1.5 for the detection of contaminants in aqueous solutions. After a discussion of the principles of SPR, of the metal window design optimization by means of optical interaction numerical modeling, and of waveguide fabrication techniques, we give a description of system setup and experimental results. Optimum gold film window thickness and width in this guided-wave configuration has been for the first time derived and implemented on an integrated optic prototype device. Its characterization is given by means of the real time waveguide output intensity measurements, which correspond to the interaction between the sensing gold thin film window and the flowing analyte. The SPR curve was subsequently inferred. Finally, a modified version of the device is reported, with channel waveguides arranged in a Y-junction optical circuit, so that laser source stability requirements are lowered by a factor of 85 dB, making possible the use of low cost sources in practical applications.

  11. Laser-assisted fabrication of gold nanoparticle-composed structures embedded in borosilicate glass

    Directory of Open Access Journals (Sweden)

    Nikolay Nedyalkov

    2017-11-01

    Full Text Available We present results on laser-assisted formation of two- and three-dimensional structures comprised of gold nanoparticles in glass. The sample material was gold-ion-doped borosilicate glass prepared by conventional melt quenching. The nanoparticle growth technique consisted of two steps – laser-induced defect formation and annealing. The first step was realized by irradiating the glass by nanosecond and femtosecond laser pulses over a wide range of fluences and number of applied pulses. The irradiation by nanosecond laser pulses (emitted by a Nd:YAG laser system induced defect formation, expressed by brown coloration of the glass sample, only at a wavelength of 266 nm. At 355, 532 and 1064 nm, no coloration of the sample was observed. The femtosecond laser irradiation at 800 nm also induced defects, again observed as brown coloration. The absorbance spectra indicated that this coloration was related to the formation of oxygen deficiency defects. After annealing, the color of the irradiated areas changed to pink, with a corresponding well-defined peak in the absorbance spectrum. We relate this effect to the formation of gold nanoparticles with optical properties defined by plasmon excitation. Their presence was confirmed by high-resolution TEM analysis. No nanoparticle formation was observed in the samples irradiated by nanosecond pulses at 355, 532 and 1064 nm. The optical properties of the irradiated areas were found to depend on the laser processing parameters; these properties were studied based on Mie theory, which was also used to correlate the experimental optical spectra and the characteristics of the nanoparticles formed. We also discuss the influence of the processing conditions on the characteristics of the particles formed and the mechanism of their formation and demonstrate the fabrication of structures composed of nanoparticles inside the glass sample. This technique can be used for the preparation of 3D nanoparticle systems

  12. Phase separation of cesium from lead borosilicate glass by heat treatment under a reducing atmosphere

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Zhanglian; Okada, Takashi, E-mail: t-okada@u-fukui.ac.jp; Nishimura, Fumihiro; Yonezawa, Susumu

    2016-11-05

    Highlights: • Cesium was phase separated from lead borosilicate glass under a reductive atmosphere. • The phase separation occurred on the glass surface that was in contact with the gas. • The leachability of cesium was enhanced by the phase separation. • The degree of such enhancement varied depending on the heat treatment conditions. - Abstract: A phase-separation technique for removing sodium from glass using a heat-treatment method under a reducing atmosphere was previously developed for sodium recovery from waste glass. In this study, this technique was applied to cesium-containing lead borosilicate glass to concentrate the cesium in phase-separated sodium-rich materials for efficient cesium extraction. The theoretical phase-separation temperature of the sodium-rich phase was simulated by thermodynamic equilibrium calculations and was predicted to occur below 700 °C for lead borosilicate glass. Experimentally, a simulated lead borosilicate glass was melted at 1000 °C and subsequently annealed below 700 °C under a CO-containing reducing atmosphere. The phase separation of cesium was found to occur with sodium enrichment on the glass surface that was in contact with the gas phase, promoting cesium extraction from the treated glass using water. The cesium extraction efficiency was affected by the surface area of the treated glass that was in contact with water, and under the examined conditions, the cesium extraction efficiency was up to 66%. Phase separation using reductive heat treatment, combined with a water leaching technique, is suggested to be effective for extracting cesium incorporated in borosilicate glass waste.

  13. Thermodynamic Aspects of Supercritical Fluids Processing: Applications of Polymers and Wastes Treatment Aspects thermodynamiques des procédés mettant en oeuvre des fluides supercritiques : applications aux traitements des polymères et des déchets

    Directory of Open Access Journals (Sweden)

    Beslin P.

    2006-11-01

    Full Text Available Supercritical fluid processes are of increasing interest for many fields : in supercritical fluid separation (petroleum-chemistry separation and purification, food industry and supercritical fluid chromatography (analytical and preparative separation, determination of physicochemical properties; as reaction media with continuously adjustable properties from gas to liquid (low-density polyethylene, waste destruction, polymer recycling; in geology and mineralogy (volcanoes, geothermal energy, hydrothermal synthesis; in particle, fibber and substrate formations (pharmaceuticals, explosives, coatings; in drying materials (gels. This paper presents the unusual physicochemical properties of supercritical fluids in relation to their engineering applications. After a short report of fundamental concepts of critical behavior in pure fluids, we develop in more details the tunable physicochemical properties of fluid in the supercritical domain. The second part of this paper describes the engineering applications of supercritical fluids relevant of chemical reactions and polymer processing. Each application presentation is divided in two parts : the first one recalls the basic concepts including general background, physicochemical properties and the second one develops the engineering applications relevant of the advocated domain. La mise en Suvre des fluides supercritiques est d'un intérêt croissant dans de nombreux domaines : pour la séparation (séparation et purification en pétrochimie, industrie alimentaire et la chromatographie par fluides supercritiques (séparation analytique et préparatoire, détermination des propriétés physicochimiques, comme milieux réactifs aux propriétés continûment ajustables allant du gaz au liquide (polyéthylène de faible densité, élimination des déchets, recyclage des polymères, en géologie et en minéralogie (volcanologie, énergie géothermique, synthèse hydrothermique, dans la formation des particules

  14. Study of the integration of distributed generation systems in the grid: application in micro-grids; Etude de structures d'integration des systemes de generation decentralisee: application aux microreseaux

    Energy Technology Data Exchange (ETDEWEB)

    Gaztanaga Arantzamendi, H

    2006-12-15

    The present PhD deals with an original micro-grid concept and its application as a Renewable Energy Source's (RES) grid integration scheme. This micro-grid is composed of RES generators as well as support systems that incorporate additional functionalities in order to improve RES integration into the grid. According to this concept, two practical micro-grid applications have been studied in detail: a residential micro-grid and a wind farm supported by DFACTS systems (STATCOM and DVR). In both applications, the control structures which are implemented at different levels and applied to the different micro-grid elements have been developed, analyzed by means of off-line simulations and finally validated in real-time conditions with physical reduced-scale prototypes. (author)

  15. Administration des subventions aux institutions Dépenses de projet ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    IDRC CRDI

    Consultants. Cette catégorie comprend toutes les dépenses engagées pour retenir les services d'un consultant aux ... déplacement, d'hébergement et de subsistance, ainsi qu'aux services de soutien retenus directement ... le transport aérien et les autres dépenses afférentes aux déplacements du personnel du projet à.

  16. The Tokomak of Fontenay-aux-Roses

    International Nuclear Information System (INIS)

    Ginot, P.; Torossian, A.

    1975-01-01

    The Tokomak of Fontenay-aux-Roses (TFR) has been built in order to increase the performances got with the same type of machine by the Soviet physicists. The current induced into the plasma has reached 0.4MA, the main magnetic field being 60kG. A plasma with a mean electron density of 4.5 10 13 cm -3 , a maximum electron temperature of 2.5keV and a maximum ion temperature of 1keV has been obtained in hydrogen and deuterium. The discharge duration has attained 0.5sec. These results agree with those obtained before [fr

  17. Development and applications of coherent imaging with improved temporal and spatial resolution; Developpement et applications de l'imagerie coherente aux rayons X a tres haute resolution spatiale et temporelle

    Energy Technology Data Exchange (ETDEWEB)

    Mokso, Rajmund

    2006-07-01

    This work has 2 purposes: the improvement of both temporal and spatial resolution of X-ray tomography. The first part is devoted to the technical aspects of the tomographic technique, particularly at the ESRF (European Synchrotron Radiation Facility) beamline ID19, and the application of the new acquisition scheme to the imaging of liquid foams. We have improved the temporal resolution and field of view of the setup, which allowed to obtain for the first time experimental data with good statistics on three dimensional liquid foams. In the second part of the thesis we have described the Kirkpatrick-Baez focusing system and its first applications. In terms of stability and image quality the developments presented in this part of the thesis provide valuable evidence for the feasibility of phase contrast tomography in magnifying geometry. Since the ultimate goal of this research is to improve the spatial resolution in tomography for applications, four different contributions are important for the characterization of the imaging system: 1) the thermal stability and mechanical imperfections, 2) effects of distortion induced by mirror imperfections, 3) effects of refraction on sample borders, and 4) phase propagation effects with the influence of the magnification. Each of these factors has been studied.

  18. Colloids: a review of current knowledge with a view to application to phenomena of transportation within PWR; Colloides: point de vue sur les connaissances actuelles en vue d`une application aux phenomenes de transport dans les REP

    Energy Technology Data Exchange (ETDEWEB)

    Guinard, L.

    1996-12-31

    In an attempt to minimise dosimetry within the primary circuit of PWR units, research is being carried out into understanding the phenomena of transportation and deposition of corrosion products. It is therefore desirable to known the form of these corrosion products and the laws governing this form. It is generally considered that they are in soluble or particulate form. A third starts with a general presentation of colloids and goes on to define points which are useful, both on a theoretical and experimental level, in terms of application to phenomena of transportation within PWRs. (author). 69 refs., 30 figs., 6 tabs., 3 appends.

  19. Modeling of the thermal transfer inside a porous environment: application to nuclear reactors in accident situation; Modelisation du transfert thermique dans un milieu poreux: application aux reacteurs nucleaires en situation accidentelle

    Energy Technology Data Exchange (ETDEWEB)

    Rubiolo, P.R

    2000-03-01

    The purpose of this report is to simulate heat exchanges occurring by conduction, by convection and by radiating in a porous medium made up of opaque particles in a semi-transparent fluid. Usually the determination of the macroscopic equations is based on homogenization techniques, but in the case of a major accident, the complexity of the problem is so overwhelming that semi-empirical methods are used to determine macroscopic coefficients. The author develops a new method to determine these coefficients, this method is based on the calculation of different tensors: the equivalent conductivity tensor, the radiative conductivity tensor, the thermal conductivity tensor and the heat exchange coefficient (h{sub sf}) between the solid phase and the fluid one. The first chapter briefly describes energy, impulse and mass balances. In the case of the energy balance the solid phase is not supposed to be in thermal equilibrium with the liquid phase. The second chapter presents an application of the porous media method to a one-dimensional and stationary problem, this application to a simple problem gives an idea of the performance of the method. The model allowing the calculation of h{sub sf} is developed, it is a wide range model. The second chapter ends with the presentation of the model allowing the computing of the effective conductivity of fuel rods. A comparison between results given by this new method and other numeric calculations or experimental data coming from benchmarks is presented in the third chapter. This chapter ends with the simulation of a reactor core in accidental situation, 2 cases are presented: with and without the presence of water steam. (A.C.)

  20. Macroscopic models for single-phase flows in fractured porous medium: application to well tests; Modeles macroscopiques pour les ecoulements monophasiques en milieu poreux fracture: application aux tests de puits

    Energy Technology Data Exchange (ETDEWEB)

    Landereau, P.

    2000-12-01

    We consider pressure diffusion in fractured media, with application to well test interpretation. Using the volume averaging theory of Quintard and Whitaker, the local problem is replaced by a double-porosity large scale description. The parameters of the latter may be computed solving small scale closure problems on a representative volume. Using suitable numerical methods, we have performed a systematic study of these parameters as a function of the topology of the fracture network and matrix to fracture permeability contrast. We find that the matrix permeability plays a significant role near a percolation threshold. Next, we studied the exchange coefficient parameter, by unifying the different definitions of the literature in a single framework using a Fourier analysis. Finally, we applied our technique to well-test interpretation in fractured media by comparing large scale solutions to high resolution direct simulations. We find that at short time scale, very fine grid blocks are needed to get good accuracy. In that case, a good agreement is observed between large scale averaged results and reference simulations. (author)

  1. Cryo magnetic separation adaptation to environment technologies: application to industrial effluents; Adaptation de la separation cryomagnetique aux technologies de l`environnement: application a l`epuration d`effluents liquides industriels

    Energy Technology Data Exchange (ETDEWEB)

    Bureau, V

    1993-12-20

    Cryomagnetic separation adaptation to environment technologies application to industrial liquid effluents. The performance, obtained by superconducting high filed - high gradient magnetic separation, permitted to foresee the magnetic treatment of heavy metals in rinse waters, derived from the surface finishing industry. The paramagnetic ions, precipitated in basic media as hydroxides, present a very hydrated amorphous structure, which masks their subjacent magnetic properties. Coprecipitation of a `magnetic carrier`, jointly with the heavy metals, has been studied: ferric chloride forms in basic media, an hydrated iron oxide. Its structure is of the goethite type, and it stabilizes as hematite. The magnetic susceptibility of the obtained product is still weak and its crystalline structure is not enough affirmative to utilize magnetic filtration with efficiency. Mixture of ferrous sulphate and ferric chloride forms, in a basic media, an hydrated magnetite. Initial ideal ratio between divalent iron and trivalent iron, varies between 0,5 and 1,2. This mixture, coprecipitated with the heavy metals, permits to optimize the magnetic cleaning of the fluids in a high field - high gradient filter. (author)

  2. Les algues, une ressource aux applications multiples : Nutrition, Santé, Cosmétologie, Bioénergie, Environnement [The algae, a resource with multiple applications: Nutrition, Health, Cosmetics, Bioenergy, Environment

    Directory of Open Access Journals (Sweden)

    Gérard TREMBLIN

    2016-06-01

    Full Text Available Marine algae present a potential source of compounds with numerous applications in fields as different as, food processing, health, cosmetics, aquaculture, nutraceuticals, environment and renewable energy. Lipids and pigments are the main products of interest in large seaweeds or macroalgae and in microalgae composing the phytoplankton. Macroalgae have long been the subject of industrial use as gelling source (agar, carrageenan, alginate or food uses (nori, wakame, kombu. Some species are harvested and others are grown. Microalgae, for their part are the focus, for recent years, of many industrial projects such as, pigment production, omega-3 fatty acids production or more generally lipids for a future use as a biofuel resource. They are cultured in photo-bioreactors or open tanks in many regions of the world. Among the microalgae, a diatom rich in omega-3, cultivated industrially in the region of "Pays de la Loire" and commercialized as a human food supplement, has been studied in order to optimize its valorisation. Results, obtained for optimal conditions of development in culture and the advantages of using it as a food supplement for preventing cardiovascular risk factors in rats subjected to a high fat diet, are presented.

  3. Les agriculteurs s'adaptent aux changements climatiques en Tunisie ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    23 août 2011 ... Les eaux grises et la culture en serre augmentent la production alimentaire en Tunisie ... Des chercheurs insistent sur l'importance de favoriser la résilience aux ... Vulnérabilité et adaptation aux changements climatiques des ...

  4. Application of neural networks to measurement methods based on radiation interactions with matter; Application des reseaux de neurones aux methodes de mesure basees sur l'interaction rayonnement matiere

    Energy Technology Data Exchange (ETDEWEB)

    Pilato, V

    1999-07-01

    The possibility of improving by neuronal techniques the preparation and interpretation of nuclear measurements was investigated. A general methodology was developed and applied to various problems in this field. Whatever the problem to be treated, to solve it comes to determine the relation which binds the inputs to the outputs. Neural networks based on supervised training, like the multilayer Perceptron, have the capability to calculate any relation between a set of input and output data. On the other hand, the training phase is often a long and delicate operation whose difficulties grow with the size of the network:it is thus interesting to reduce it by introducing knowledge a priori and/or by reducing the number of inputs in order to extract the relevant information. If the correlations between the inputs are linear, the Principal Components Analysis (PCA) and its neuronal equivalents make it possible to obtain by orthogonal projection a reduced number of input components while preserving the maximum of initial information. If the correlations are nonlinear, the Curvilinear Components Analysis (CCA) allows, by a unsupervised training, to carry out a nonlinear projection of the inputs in a space of reduced size. Besides, it is noticed that when the dimension of the input space is equal to the intrinsic dimension of the problem, this last is practically solved by CCA. We propose a general method which consists in characterizing as well as possible the problem by its inputs and then to extract and classify the information contained in those by projection in a space of reduced size. Association between the projected data and the problem outputs is then carried out by a supervised training network. Certain results having to be provided with their associated uncertainty, a statistical method based on the bootstrap algorithm is proposed. Potential applications other that those treated are considered. (author)

  5. Experimental and numerical study of flows in PEM fuel cell stacks for traction applications; Etude numerique et experimentale des ecoulements dans une pile a combustible de type PEM adaptable aux applications embarquees

    Energy Technology Data Exchange (ETDEWEB)

    Picot, D

    1998-07-01

    The problems with the optimization and design of proton exchange membrane fuel cells (PEMFC) are mainly based on the mastery of water and heat transfers inside the active cells. A theoretical and experimental discussion about this topic is proposed. The average sharing coefficients of the generated water are measured for 3 Nora fuel cells (1, 5 and 10 kW). The values obtained with nafion 117 are in agreement with the data of the literature, while the 40% generated water recovered inside the anode compartment with nafion 115 are unexpected. The difficulty to obtain a physical formulation of electro-osmosis does not allow to quantify this coefficient and leads to justify the limitations of use of the numerical codes on this topic. However, by separating the intrinsic parameters of the electrodes/membrane system and the global operation parameters of a cell, it is possible to extrapolate realistic humidification strategies. In the framework of the European project 'Fever', a systemic model of a 30 kW module for electric-powered vehicle has been developed. For an optimum energy integration of Nora fuel cells in volume-limited applications, it is necessary to separate the humidification sections of these modules. In the case where air is used as oxidant, the presence of nitrogen inside the anode compartment has been evidenced both in close and recirculation modes. In agreement with the literature data about nafion permeability, the nitrogen migration through the electrolyte is explained by the diffusion theory. A discussion about the interest of using both operational modes to maximize the energy efficiency is proposed. Finally, a simple-phase and double-phase numerical study with interface reconstruction is carried out using the resolution of Navier-Stokes equations in Eulerian formalism in order to consider the problems linked with the internal flows inside the collectors of Nora cells. (J.S.)

  6. Global dynamics of shaft lines of turbo-machineries coupled to surrounding fluids: application to the case of fluid sheets; Dynamique globale des lignes d'arbres de turbomachines couplees aux fluides environnants: application au cas des lames fluides

    Energy Technology Data Exchange (ETDEWEB)

    Lornage, D.

    2001-12-15

    Shaft lines of turbo-machineries have to stand increasing reliability, efficiency and safety requirements. A precise modeling of the rotating parts with all possible coupling has become necessary. In this context, this work aims to develop a global modeling of rotating wheel/shaft system inside a surrounding fluid in order to foresee its dynamical behaviour. The use and advantage of Eulerian, Lagrangian and mixed (arbitrary Lagrangian Eulerian - ALE) formulations is recalled first. A bibliographic synthesis of the classical techniques used in structure mechanics and of coupling techniques for rotating machines is presented. The coupling technique retained is presented. It uses fluid and structure models independently developed and validated. The structure domain is discretized by the finite-element method. The fluid domain is discretized by the finite-difference method taking into consideration the hypotheses linked with thin films. A modal base projection combined with a mesh at the fluid-structure interface allows an efficient, adaptable and evolutive coupling. Finally, the method is applied to 3 test-cases. The first two ones comprise a shaft/disc system coupled to a fluid sheet between the disc and the casing and to an hydrodynamic bearing. Both cases allow a first validation of the coupling method. The third case aims to study a structure closer to a real system made of a shaft and a wheel coupled to a fluid sheet between a flange and a casing. These three applications allow to show the trends linked with the fluid effects and the coupling between the flexible sub-parts of the structure. (J.S.)

  7. Application of the simplified J-estimation scheme Aramis to mismatching welds in CCP; Application du concept d`integrale J dans l`outil Aramis aux effets de mismatch sur des eprouvettes CCP

    Energy Technology Data Exchange (ETDEWEB)

    Eripret, C.; Franco, C.; Gilles, P.

    1995-12-31

    The J-based criteria give reasonable predictions of the failure behaviour of ductile cracked metallic structures, even if the material characterization may be sensitive to the size of the specimens. However in cracked welds, this phenomenon due to stress triaxiality effects could be enhanced. Furthermore, the application of conventional methods of toughness measurement (ESIS or ASTM standard) have evidenced a strong influence of the portion of the weld metal in the specimen. Several authors have shown the inadequacy of the simplified J-estimation methods developed for homogeneous materials. These heterogeneity effects mainly related to the mismatch ratio (ratio of weld metal yield strength upon base metal yield strength) as well as to the geometrical parameter h/W-a (weld width upon ligament size). In order to make decisive progress in this field, the Atomic Energy Commission (CEA), the PWR manufacturer FRAMATOME, and the French utility (EDF) have launched a large research program on cracked piping welds behaviour. As part of this program, a new J-estimation scheme, so called ARAMIS, has been developed to account for the influence of both materials, i.e. base metal and weld metal, on the structural resistance of cracked welds. It has been shown that, when the mismatch is high, and when the ligament size is small compared to the weld width, a classical J-based method using the softer material properties is very conservative. On the opposite the ARAMIS method provides a good estimate of J, because it predicts pretty well the shift of the cracked weld limit load, due to the presence of the weld. the influence of geometrical parameters such as crack size, weld width, or specimen length is property accounted for. (authors). 23 refs., 8 figs., 1 tab., 1 appendix.

  8. Chemical durability of lead borosilicate glass matrix under simulated geological conditions

    International Nuclear Information System (INIS)

    Yalmali, Vrunda S.; Deshingkar, D.S.; Wattal, P.K.

    2002-03-01

    The lead borosilicate glass has been developed for vitrification of High Level Waste (HLW) stored at Trombay. This waste is contains especially high contents of sodium, uranium sulphate and iron. The glasses containing HLW are to be ultimately disposed into deep geological repositories. Long term leach rates under simulated geological conditions need to be evaluated for glass matrix. Studies were taken up to estimate the lead borosilicate glass WTR-62 matrix for chemical durability in presence of synthetic ground water. The leachant selected was based on composition of ground water sample near proposed repository site. In the first phase of these tests, the experiments were conducted for short duration of one and half month. The leaching experiments were conducted in presence of a) distilled water b) synthetic ground water c) synthetic ground water containing granite, bentonite and ferric oxide and d) synthetic ground water containing humic acid at 100 0 C. The leachate samples were analysed by pHmetry , ion chromatography and UV -VIS spectrophotometry. The normalised leach rates for lead borosilicate WTR- 62 glass matrix based on silica, boron and sulphate analyses of leachates were of the order of 10 -3 to 10 -5 gms/cm 2 /day for 45 days test period in presence of synthetic ground water as well as in presence of other materials likely to be present along with synthetic ground water. These rates are comparable to those of sodium borsilicate glass matrices reported in literature. It is known that the leach rates of glass matrix decrease with longer test durations due to formation of leached layer on its surface. The observed leach rates of lead borosilicate WTR- 62 glass matrix for 45 day tests under simulated geological conditions were found to be sufficiently encouraging to take up long term tests for evaluating its performances under repository conditions. (author)

  9. Effect of ThO2 concentration on thermo-physical properties of barium borosilicate glass

    International Nuclear Information System (INIS)

    Mishra, R.K.; Munshi, A.K.; Kaushik, C.P.; Raj, Kanwar; Shobha, M.; Srikhande, V.K.; Kothiyal, G.P.; Tyagi, A.K.

    2006-01-01

    An advanced heavy water reactor is being developed at Bhabha Atomic Research Centre (BARC) India with an aim of utilizing thorium for power generation. The high level radioactive liquid waste (HLW) generated from reprocessing of Th-based spent fuel is expected to contain Th as one of the main constituents other than fission products, corrosion products, actinides and added chemicals. Barium borosilicate (BBS) glass is being used for vitrification of the HLW generated at the reprocessing plant at BARC, Trombay, Mumbai

  10. Determination of occluded helium and oxygen in irradiated borosilicate glass samples

    International Nuclear Information System (INIS)

    Ramanjaneyulu, P.S.; Kulkarni, A.S.; Shrivastava, K.C.; Yadav, C.S.; Saxena, M.K.; Tomar, B.S.; Ramakumar, K.L.; Shah, J.G.

    2015-01-01

    Occluded gases in irradiated borosilicate glass were determined at 573, 873 and 1273 K for understanding the radiation damage in glass matrix. Hot vacuum extraction coupled with a quadrupole mass spectrometer technique was employed for the measurements. Relative sensitivity factors of various gases in QMS system were also determined and used for gas composition calculations. At 573 K only helium was found to get released whereas at 873 and 1273 K both helium and oxygen were released with major fraction of oxygen. (author)

  11. Influence of Mo on the structure of borosilicate glass for the immobilization of high level waste

    International Nuclear Information System (INIS)

    Petrov, I.; Dimitriev, Y.; Kashchieva, E.

    2015-01-01

    It has been shown that the classic multi-borosilicate glass with concentration of MoO 3 has a low melting in the range of 1300 to 1400 ° C, but for achieving of complete homogenization and vitrification it is required temperature above 1400 ° C. Under this temperature in all tested samples areas of crystallization were observed, due to incomplete vitrification processes. It is understood that in all multicomponent borosilicate glass featuring MoO 3 , occur micro vitrification processes, and at a concentration of MoO 3 above 20% - macro segregation; It has been shown that the introduction of Nd in compound borosilicate glass featuring MoO 3 is observed crystallization of the phase Na 0.5 Nd 0.5 Mo, and it has been also found that the phase Na 0.5 Nd 0.5 Mo 4 can be synthesized either by solid phase reaction or supercooled melt. The results of surveys show that It is possible to prevent the occurrence of liquid phase separation in the studied multicomponent glass. From a structural point of view, the cause of liquid phase separation is the result of structural incompatibility of molybdenum units with structural units borosilicate network since not been established links Mo-O-B-O and Mo-Si. From a thermodynamic point of view in the lamination multi windows may be due to overlapping areas of delamination in component binary and triple systems. From the kinetic point of view of course the liquid phase by settling, and crystallization may be due to imbalances conditions the cooling process, in the course of which flow various processes of imbalances metastable settling, followed by crystallization of molybdate phases

  12. Electron irradiation effect on bubble formation and growth in a sodium borosilicate glass

    International Nuclear Information System (INIS)

    Chen, X.; Birtcher, R. C.; Donnelly, S. E.

    2000-01-01

    In this study, the authors studied simultaneous and intermittent electron irradiation effects on bubble growth in a simple sodium borosilicate glass during Xe ion implantation at 200 C. Simultaneous electron irradiation increases the average bubble size in the glass. This enhanced diffusion is also shown by the migration of Xe from bubbles into the matrix when the sample is irradiated by an electron beam after the Xe implantation

  13. Proving the role of boron in the structure of fly-ash/borosilicate glass based geopolymers

    Czech Academy of Sciences Publication Activity Database

    Taveri, Gianmarco; Toušek, J.; Bernardo, E.; Toniolo, N.; Boccaccini, A. R.; Dlouhý, Ivo

    2017-01-01

    Roč. 200, AUG (2017), s. 105-108 ISSN 0167-577X EU Projects: European Commission(XE) 642557 - CoACH Institutional support: RVO:68081723 Keywords : Fly-ash * Borosillicate * Geopolymerization * Spectroscopy * NMR * FTIR Subject RIV: JH - Ceramics, Fire-Resistant Materials and Glass OBOR OECD: Ceramics Impact factor: 2.572, year: 2016 http://www.sciencedirect.com/science/article/pii/S0167577X1730650X

  14. The application of the ISO 14001 environmental management system to small hydropower plants; L'application de l'ISO 14001 systeme environnemental de gestion aux petites centrales hydro-electriques

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    The ISO 14000 environmental management standards exist to help organisations minimise how their operations negatively affect the environment and to comply with applicable laws and regulations. More specifically, ISO 14001 is the international specification for an environmental management system (EMS). It specifies requirements for establishing an environmental policy, determining environmental aspects and impacts of products/activities/services, planning environmental objectives and measurable targets, implementation and operation of programs to meet objectives and targets, checking and corrective action, and management review. The overall idea is to establish an organized approach to systematically reduce the impact of the environmental aspects that an organization can control. Tools are available for the analysis of environmental aspects and for the generation of options for improvement. As with ISO 9000 (quality management), certification is performed by third-party organizations. Hydroelectricity enables to generate clean energy with no direct emissions of greenhouse gases and without consuming fossil fuels. However, this activity is implemented within a sensitive natural environment: the watercourses are shared with several users such as the fishermen, the kayakers, farmers and industry. Generating hydroelectricity induces very little discharges into the environment. Conversely, its implementation on the watercourses can alter the flow rates and the ecosystem: leading to disruption in the free passage of fish, change in the hydrodynamics of a watercourse, emission of noise, production of waste, pollution through oil leak, damage inflicted on the landscape, etc. These environmental impacts form the subject of several monitoring and control operations that are designed to limit and preserve the natural environment. Additionally, relations with the water users and the administrations are sometimes difficult and this would require a dialogue to be established to

  15. Near infrared thermography by CCD cameras and application to first wall components of Tore Supra tokamak; Thermographie proche infrarouge par cameras CCD et application aux composants de premiere paroi du tokamak Tore Supra

    Energy Technology Data Exchange (ETDEWEB)

    Moreau, F.

    1996-06-07

    In the Tokamak TORE-SUPRA, the plasma facing components absorbs and evacuate (active cooling) high power fluxes (up to 10 MW/m{sup 2}). Their thermal behavior study is essential for the success of controlled thermonuclear fusion line. The first part is devoted to the study of power deposition on the TORE-SUPRA actively cooled limiters. A model of power deposition on one of the limiters is developed. It takes into account the magnetic topology and a description of the plasma edge. The model is validated with experimental calorimetric data obtained during a series of shots. This will allow to compare the surface temperature measurements with the predicted ones. The main purpose of this thesis was to evaluate and develop a new temperature measurement system. It works in the near infrared range (890 nm) and is designed to complete the existing thermographic diagnostic of TORE-SUPRA. By using the radiation laws (for a blackbody and the plasma) and the laboratory calibration one can estimate the surface temperature of the observed object. We evaluate the performances and limits of such a device in the harsh conditions encountered in a Tokamak environment. On the one hand, in a quasi ideal situation, this analysis shows that the range of measurements is 600 deg. C to 2500 deg. C. On the other hand, when one takes into account of the plasma radiation (with an averaged central plasma density of 6.10{sup 19} m{sup -3}), we find that the minimum surface temperature rise to 900 deg. C instead of 700 deg. C. In the near future, according to the development of IR-CCD cameras working in the near infrared range up to 2 micrometers, we will be able to keep the good spatial resolution with an improved lower limit for the temperature down to 150 deg. C. The last section deals with a number of computer tools to process the images obtained from experiments on TORE-SUPRA. A pattern recognition application was developed to detect a complex plasma iso-intensity structure. 87 refs.

  16. Preliminary assessment of modified borosilicate glasses for chromium and ruthenium immobilization

    Energy Technology Data Exchange (ETDEWEB)

    Farid, Osama M. [Reactors Department, Nuclear Research Center, Atomic Energy Authority of Egypt, P.O. 13759, Inshas, Cairo (Egypt); Centre of Nuclear Engineering (CNE), Department of Materials, Imperial College London, London, SW7 2BP (United Kingdom); Abdel Rahman, R.O., E-mail: alaarehab@yahoo.com [Hot Laboratory Center, Atomic Energy Authority of Egypt, P.O. 13759, Inshas, Cairo (Egypt)

    2017-01-15

    The feasibility of using modified alkali borosilicate glasses for ruthenium and chromium immobilization is preliminary assessed by investigating the immobilization system structure under normal conditions. Within this context, reference alkali borosilicate, and simulated Magnox-modified glasses were prepared and studied. The results indicate that ruthenium is immobilized in the vitreous structure as encapsulated RuO{sub 2} crystallites that act as seeds for heterogeneous nucleation of other crystalline phases. The presence of Zn, as modifier, has contributed to chromium immobilization in zincochromite spinel structure, whereas Ca is accommodated in the vitreous structure. Immobilization performance was evaluated by conducting conservative static leach test and studying the leached glass. Leached glass morphology was altered, where near surface reference glass is leached over 400 nm and simulated Magnox-modified sample is altered over 300 nm. Normalized release rates are within normal range for borosilicate material. For simulated Magnox-modified sample, Ca and alkali structural element, i.e. Na and Li, are leached via ion-exchange reaction. The ion-exchanged fraction equals 1.06 × 10{sup −8} mol/m{sup 2} s and chromium has slightly lower normalized release rate value than ruthenium. - Highlights: • The presence of modifiers and waste oxides led to localized de-vitrification. • Ruthenium is encapsulated within the vitreous glass network as RuO{sub 2} crystals. • Chromium is immobilized within the zincochromite spinel structure. • Pitting and cracks induced by leaching did not affect the immobilization performance.

  17. Development of borosilicate glass compositions for the immobilisation of the UK's separated plutonium stocks

    International Nuclear Information System (INIS)

    Harrison, M. T.; Scales, C. R.

    2008-01-01

    The UK inventory of separated civil plutonium is expected to exceed 100 tonnes by 2010. Whilst the majority of this could be used in the manufacture of MOx (Mixed Oxide) fuel in future power generation scenarios, options for the disposal of surplus plutonium are currently being investigated by Nexia Solutions Ltd on behalf of the UK's Nuclear Decommissioning Authority (NDA). One of the options being considered is immobilisation in a durable glass matrix followed by long term storage and subsequent final repository disposal. A preliminary experimental survey assessed a selection of potential glass systems on the basis of Pu-surrogate (cerium) loading, durability, and ease of processing. Following this, a number of borosilicate compositions have been taken forward into a more detailed investigation in order to fully qualify their potential for Pu-immobilisation. The selected compositions are lanthanide borosilicate (LaBS), alkali tin silicate (ATS) and high-lanthanide alkali borosilicate (modified-MW). For this second series of experiments, hafnium was selected as the Pu surrogate, and a study of the potential waste loading as a function of temperature for the three selected compositions is described in this paper. Furthermore, several variations of the LaBS composition were fabricated in order to investigate the effect of total lanthanide content on melting temperature. The benchmark of 10 wt% HfO 2 incorporation is achievable for all three glasses with temperatures of 1200, 1300 and 1400 deg. C required for ATS, modified-MW and LaBS respectively. (authors)

  18. X-ray absorption and Raman spectroscopy studies of molybdenum environments in borosilicate waste glasses

    Science.gov (United States)

    McKeown, David A.; Gan, Hao; Pegg, Ian L.

    2017-05-01

    Mo-containing high-level nuclear waste borosilicate glasses were investigated as part of an effort to improve Mo loading while avoiding yellow phase crystallization. Previous work showed that additions of vanadium decrease yellow phase formation and increases Mo solubility. X-ray absorption spectroscopy (XAS) and Raman spectroscopy were used to characterize Mo environments in HLW borosilicate glasses and to investigate possible structural relationships between Mo and V. Mo XAS spectra for the glasses indicate isolated tetrahedral Mo6+O4 with Mo-O distances near 1.75 Å. V XANES indicate tetrahedral V5+O4 as the dominant species. Raman spectra show composition dependent trends, where Mo-O symmetrical stretch mode frequencies (ν1) are sensitive to the mix of alkali and alkaline earth cations, decreasing by up to 10 cm-1 for glasses that change from Li+ to Na+ as the dominant network-modifying species. This indicates that MoO4 tetrahedra are isolated from the borosilicate network and are surrounded, at least partly, by Na+ and Li+. Secondary ν1 frequency effects, with changes up to 7 cm-1, were also observed with increasing V2O5 and MoO3 content. These secondary trends may indicate MoO4-MoO4 and MoO4-VO4 clustering, suggesting that V additions may stabilize Mo in the matrix with respect to yellow phase formation.

  19. Aqueous corrosion of borosilicate glasses. Nature and properties of alteration layers

    International Nuclear Information System (INIS)

    Trotignon, Laurent

    1990-01-01

    This research thesis addresses physical and chemical processes which occur during aqueous corrosion of silicates, and the study of the properties of their interfaces with solutions, and thus issues related to the fate of high activity nuclear wastes which are embedded in a vitreous matrix as the potential release of radionuclides towards the environment then depends on the glass parcel behaviour submitted to chemical attacks which could alter it, notably by aqueous corrosion. The objective is then to model the dissolution of nuclear glass over long periods of time, and to predict the behaviour of radionuclides. The author compared the corrosion and alteration layers of gradually more complex borosilicate glasses, from a ternary sodium borosilicate glass to a simulated nuclear glass (the French reference glass R7T7). Complexity is increased by adding oxides. After some theoretical recalls on the structure and corrosion of borosilicate glasses, the author presents the studied materials, the corrosion experiments, and analytical techniques used to study alteration layers. The mechanism of formation of altered layers is studied based on corrosion experiments performed at 90 C on the whole set of glasses. Alteration layers formed on corroded glasses are studied and compared by using various techniques: electronic microscopy, high energy ion beams, spectroscopy, infrared, photo-electron spectroscopy. Implications for underground storage of nuclear glasses are discussed

  20. High-level waste borosilicate glass a compendium of corrosion characteristics. Volume 1

    International Nuclear Information System (INIS)

    Cunnane, J.C.

    1994-03-01

    Current plans call for the United States Department of Energy (DOE) to start up facilities for vitrification of high-level radioactive waste (HLW) stored in tanks at the Savannah River Site, Aiken, South Carolina, in 1995; West Valley Demonstration Project, West Valley, New York, in 1996; and at the Hanford Site, Richland, Washington, after the year 2000. The product from these facilities will be canistered HLW borosilicate glass, which will be stored, transported, and eventually disposed of in a geologic repository. The behavior of this glass waste product, under the range of likely service conditions, is the subject of considerable scientific and public interest. Over the past few decades, a large body of scientific information on borosilicate waste glass has been generated worldwide. The intent of this document is to consolidate information pertaining to our current understanding of waste glass corrosion behavior and radionuclide release. The objective, scope, and organization of the document are discussed in Section 1.1, and an overview of borosilicate glass corrosion is provided in Section 1.2. The history of glass as a waste form and the international experience with waste glass are summarized in Sections 1.3 and 1.4, respectively

  1. Influence of Cu doping in borosilicate bioactive glass and the properties of its derived scaffolds.

    Science.gov (United States)

    Wang, Hui; Zhao, Shichang; Xiao, Wei; Xue, Jingzhe; Shen, Youqu; Zhou, Jie; Huang, Wenhai; Rahaman, Mohamed N; Zhang, Changqing; Wang, Deping

    2016-01-01

    Copper doped borosilicate glasses (BG-Cu) were studied by means of FT-IR, Raman, UV-vis and NMR spectroscopies to investigate the changes that appeared in the structure of borosilicate glass matrix by doping copper ions. Micro-fil and immunohistochemistry analysis were applied to study the angiogenesis of its derived scaffolds in vivo. Results indicated that the Cu ions significantly increased the B-O bond of BO4 groups at 980 cm(-1), while they decrease that of BO2O(-) groups at 1440-1470 cm(-1) as shown by Raman spectra. A negative shift was observed from (11)B and (29)Si NMR spectra. The (11)B NMR spectra exhibited a clear transformation from BO3 into BO4 groups, caused by the agglutination effect of the Cu ions and the charge balance of the agglomerate in the glass network, leading to a more stable glass network and lower ions release rate in the degradation process. Furthermore, the BG-Cu scaffolds significantly enhanced blood vessel formation in rat calvarial defects at 8 weeks post-implantation. Generally, it suggested that the introduction of Cu into borosilicate glass endowed glass and its derived scaffolds with good properties, and the cooperation of Cu with bioactive glass may pave a new way for tissue engineering. Copyright © 2015 Elsevier B.V. All rights reserved.

  2. Mechanical behavior of cellular borosilicate glass with pressurized Ar-filled closed pores

    International Nuclear Information System (INIS)

    Wang Bo; Matsumaru, Koji; Yang Jianfeng; Fu Zhengyi; Ishizaki, Kozo

    2012-01-01

    High strength borosilicate foams were fabricated by melting glass powder under high-pressure argon gas and subsequent heat treatment of the glass bulk at atmospheric pressure. In the first step, borosilicate glass powder was melted at 1100 °C for 1 h by capsule-free hot isostatic pressing (HIPing) under a high gas pressure of 10–70 MPa. Pressurized Ar-filled spherical pores were introduced into the glass, and argon atoms were dissolved in the glass network structure. The expansion of argon-filled pores and the release of the dissolved Ar gas resulted in the formation of pressurized Ar-filled closed pores by isothermal heat treatment at 800 °C for 10 min. A high porosity of up to 80% with a bimodal distribution of micro-size cells was obtained for the resultant cellular borosilicate glass. By increasing the total gas pressure from 10 to 70 MPa, the compressive strength and the Young’s modulus were increased considerably from 15 to 52 MPa and from 4.1 to 12.6 GPa, respectively, which can be substantially attributed to the high collapse stress from the high enclosed gas pressure. The cellular glass with a high porosity showed a large failure strain under uniaxial compression.

  3. Thermodynamique des moteurs thermiques aux structures dissipatives

    CERN Document Server

    Prigogine, Ilya

    1999-01-01

    Ce livre constitue à la fois une présentation complète de la thermodynamique et une introduction scientifique à l'œuvre de Prigogine. Les auteurs innovent en montrant comment la thermodynamique du non-équilibre est un prolongement naturel de la thermodynamique de l'équilibre. Elle constitue ainsi la science des processus irréversibles - " la flèche du temps " - dont les structures dissipatives sont les témoignages les plus éclatants. Les développements historiques en font, non seulement un texte de référence, mais aussi un livre de culture. Les nombreux exemples et exercices, comme les programmes informatiques et les références aux sites Internet en font un outil de travail irremplaçable.

  4. Empirical Calibration for Dolomite Stoichiometry Calculation: Application on Triassic Muschelkalk- Lettenkohle Carbonates (French Jura Calibration empirique pour le calcul de la stoechiométrie de la dolomite : application aux carbonates triasiques du Muschelkalk-Lettenkohle (Jura français

    Directory of Open Access Journals (Sweden)

    Turpin M.

    2012-02-01

    Full Text Available This study concerns an approach for dolomite quantification and stoichiometry calculation by using X-ray diffractometry coupled with cell and Rietveld refinements and equipped with a newly substantial database of dolomite composition. A greater accuracy and precision are obtained for quantifying dolomite as well as other mineral phases and calculating dolomite stoichiometry compared to the classical “Lumsden line” and previous methods. The applicability of this approach is verified on dolomite reference material (Eugui and on Triassic (Upper Muschelkalk-Lettenkohle carbonates from the French Jura. The approach shown here is applicable to bulk dolostones as well as to specific dolomite cements and was combined with petrographical and isotopic analyses. Upper Muschelkalk dolomites were formed during burial dolomitization under fluids characterized by increased temperature and variable isotopic composition through burial. This is clear from their Ca content in dolomites which gradually approaches an ideal stoichiometry (from 53.16% to 51.19% through increasing dolomitization. Lettenkohle dolostones consist of near-ideal stoichiometric (51.06%Ca and well-ordered dolomites associated with anhydrite relicts. They originated through both sabkha and burial dolomitization. This contribution gives an improved method for the characterization of different dolomite types and their distinct traits in sedimentary rocks, which allows a better evaluation of their reservoir potential. Cette étude propose une approche pour la quantification de la dolomite et le calcul de sa stoechiométrie grâce à l’utilisation de la diffraction des rayons X couplée aux affinements de maille et de Rietveld et complétée par de nombreuses données issues de la littérature. Elle permet d’obtenir une meilleure justesse et précision pour la quantification de la dolomite (et des autres phases minérales ainsi que pour le calcul de sa stoechiométrie par rapport à l

  5. A dynamic fatigue study of soda-lime silicate and borosilicate glasses using small scale indentation flaws

    International Nuclear Information System (INIS)

    Dabbs, T.P.; Lawn, B.R.; Kelly, P.L.

    1982-01-01

    The dynamic fatigue characteristics of two glasses, soda-lime silicate and borosilicate, in water have been studied using a controlled indentation flaw technique. It is argued that the indentation approach offers several advantages over more conventional fatigue testing procedures: (i) the reproducibility of data is relatively high, eliminating statistics as a basis of analysis: (ii) the flaw ultimately responsible for failure is well defined and may be conveniently characterised before and after (and during, if necessary) the strength test; (iii) via adjustment of the indentation load, the size of the flaw can be suitably predetermined. Particular attention is devoted to the third point because of the facility it provides for systematic investigation of the range of flaw sizes over which macroscopic crack behaviour remains applicable. The first part of the paper summarises the essential fracture mechanics theory of the extension of an indentation flaw to failure. In the next part of the paper the results of dynamic fatigue tests on glass rods in distilled water are described. Data are obtained for Vickers indentation loads in the range 0.05 to 100 N, corresponding to contact dimensions of 2 to 100 μm. Finally, the implications of the results in relation to the response of 'natural' flaws are discussed. (author)

  6. Conversion of plutonium-containing materials into borosilicate glass using the glass material oxidation and dissolution system

    International Nuclear Information System (INIS)

    Forsberg, C.W.; Beahm, E.C.; Parker, G.W.

    1996-01-01

    The end of the cold war has resulted in excess plutonium-containing materials (PCMs) in multiple chemical forms. Major problems are associated with the long-term management of these materials: safeguards and nonproliferation issues; health, environment, and safety concerns; waste management requirements; and high storage costs. These issues can be addressed by conversion of the PCMs to glass: however, conventional glass processes require oxide-like feed materials. Conversion of PCMs to oxide-like materials followed by vitrification is a complex and expensive process. A new vitrification process has been invented, the Glass Material Oxidation and Dissolution System (GMODS) to allow direct conversion of PCMs to glass. GMODS directly converts metals, ceramics, and amorphous solids to glass; oxidizes organics with the residue converted to glass; and converts chlorides to borosilicate glass and a secondary sodium chloride stream. Laboratory work has demonstrated the conversion of cerium (a plutonium surrogate), uranium (a plutonium surrogate), Zircaloy, stainless steel, multiple oxides, and other materials to glass. Equipment options have been identified for processing rates between 1 and 100,000 t/y. Significant work, including a pilot plant, is required to develop GMODS for applications at an industrial scale

  7. A Raman spectroscopy study on the effects of intermolecular hydrogen bonding on water molecules absorbed by borosilicate glass surface

    Science.gov (United States)

    Li, Fabing; Li, Zhanlong; Wang, Ying; Wang, Shenghan; Wang, Xiaojun; Sun, Chenglin; Men, Zhiwei

    2018-05-01

    The structural forms of water/deuterated water molecules located on the surface of borosilicate capillaries have been first investigated in this study on the basis of the Raman spectral data obtained at different temperatures and under atmospheric pressure for molecules in bulk and also for molecules absorbed by borosilicate glass surface. The strongest two fundamental bands locating at 3063 cm-1 (2438 cm-1) in the recorded Raman spectra are assigned here to the Osbnd H (Osbnd D) bond stretching vibrations and they are compared with the corresponding bands observed at 3124 cm-1 (2325 cm-1) in the Raman spectrum of ice Ih. Our spectroscopic observations have indicated that the structure of water and deuterated water molecules on borosilicate surface is similar to that of ice Ih (hexagonal phase of ice). These observations have also indicated that water molecules locate on the borosilicate surface so as to construct a bilayer structure and that strong and weak intermolecular hydrogen bonds are formed between water/deuterated molecules and silanol groups on borosilicate surface. In accordance with these findings, water and deuterated water molecules at the interface of capillary have a higher melting temperature.

  8. Aqueous corrosion of borosilicate glasses: experiments, modeling and Monte-Carlo simulations; Alteration par l'eau des verres borosilicates: experiences, modelisation et simulations Monte-Carlo

    Energy Technology Data Exchange (ETDEWEB)

    Ledieu, A

    2004-10-01

    This work is concerned with the corrosion of borosilicate glasses with variable oxide contents. The originality of this study is the complementary use of experiments and numerical simulations. This study is expected to contribute to a better understanding of the corrosion of nuclear waste confinement glasses. First, the corrosion of glasses containing only silicon, boron and sodium oxides has been studied. The kinetics of leaching show that the rate of leaching and the final degree of corrosion sharply depend on the boron content through a percolation mechanism. For some glass contents and some conditions of leaching, the layer which appears at the glass surface stops the release of soluble species (boron and sodium). This altered layer (also called the gel layer) has been characterized with nuclear magnetic resonance (NMR) and small angle X-ray scattering (SAXS) techniques. Second, additional elements have been included in the glass composition. It appears that calcium, zirconium or aluminum oxides strongly modify the final degree of corrosion so that the percolation properties of the boron sub-network is no more a sufficient explanation to account for the behavior of these glasses. Meanwhile, we have developed a theoretical model, based on the dissolution and the reprecipitation of the silicon. Kinetic Monte Carlo simulations have been used in order to test several concepts such as the boron percolation, the local reactivity of weakly soluble elements and the restructuring of the gel layer. This model has been fully validated by comparison with the results on the three oxide glasses. Then, it has been used as a comprehensive tool to investigate the paradoxical behavior of the aluminum and zirconium glasses: although these elements slow down the corrosion kinetics, they lead to a deeper final degree of corrosion. The main contribution of this work is that the final degree of corrosion of borosilicate glasses results from the competition of two opposite mechanisms

  9. Water leaching of borosilicate glasses: experiments, modeling and Monte Carlo simulations; Alteration par l'eau des verres borosilicates: experiences, modelisation et simulations Monte Carlo

    Energy Technology Data Exchange (ETDEWEB)

    Ledieu, A

    2004-10-15

    This work is concerned with the corrosion of borosilicate glasses with variable oxide contents. The originality of this study is the complementary use of experiments and numerical simulations. This study is expected to contribute to a better understanding of the corrosion of nuclear waste confinement glasses. First, the corrosion of glasses containing only silicon, boron and sodium oxides has been studied. The kinetics of leaching show that the rate of leaching and the final degree of corrosion sharply depend on the boron content through a percolation mechanism. For some glass contents and some conditions of leaching, the layer which appears at the glass surface stops the release of soluble species (boron and sodium). This altered layer (also called the gel layer) has been characterized with nuclear magnetic resonance (NMR) and small angle X-ray scattering (SAXS) techniques. Second, additional elements have been included in the glass composition. It appears that calcium, zirconium or aluminum oxides strongly modify the final degree of corrosion so that the percolation properties of the boron sub-network is no more a sufficient explanation to account for the behavior of these glasses. Meanwhile, we have developed a theoretical model, based on the dissolution and the reprecipitation of the silicon. Kinetic Monte Carlo simulations have been used in order to test several concepts such as the boron percolation, the local reactivity of weakly soluble elements and the restructuring of the gel layer. This model has been fully validated by comparison with the results on the three oxide glasses. Then, it has been used as a comprehensive tool to investigate the paradoxical behavior of the aluminum and zirconium glasses: although these elements slow down the corrosion kinetics, they lead to a deeper final degree of corrosion. The main contribution of this work is that the final degree of corrosion of borosilicate glasses results from the competition of two opposite mechanisms

  10. Water leaching of borosilicate glasses: experiments, modeling and Monte Carlo simulations; Alteration par l'eau des verres borosilicates: experiences, modelisation et simulations Monte Carlo

    Energy Technology Data Exchange (ETDEWEB)

    Ledieu, A

    2004-10-15

    This work is concerned with the corrosion of borosilicate glasses with variable oxide contents. The originality of this study is the complementary use of experiments and numerical simulations. This study is expected to contribute to a better understanding of the corrosion of nuclear waste confinement glasses. First, the corrosion of glasses containing only silicon, boron and sodium oxides has been studied. The kinetics of leaching show that the rate of leaching and the final degree of corrosion sharply depend on the boron content through a percolation mechanism. For some glass contents and some conditions of leaching, the layer which appears at the glass surface stops the release of soluble species (boron and sodium). This altered layer (also called the gel layer) has been characterized with nuclear magnetic resonance (NMR) and small angle X-ray scattering (SAXS) techniques. Second, additional elements have been included in the glass composition. It appears that calcium, zirconium or aluminum oxides strongly modify the final degree of corrosion so that the percolation properties of the boron sub-network is no more a sufficient explanation to account for the behavior of these glasses. Meanwhile, we have developed a theoretical model, based on the dissolution and the reprecipitation of the silicon. Kinetic Monte Carlo simulations have been used in order to test several concepts such as the boron percolation, the local reactivity of weakly soluble elements and the restructuring of the gel layer. This model has been fully validated by comparison with the results on the three oxide glasses. Then, it has been used as a comprehensive tool to investigate the paradoxical behavior of the aluminum and zirconium glasses: although these elements slow down the corrosion kinetics, they lead to a deeper final degree of corrosion. The main contribution of this work is that the final degree of corrosion of borosilicate glasses results from the competition of two opposite mechanisms

  11. Aqueous corrosion of borosilicate glasses: experiments, modeling and Monte-Carlo simulations; Alteration par l'eau des verres borosilicates: experiences, modelisation et simulations Monte-Carlo

    Energy Technology Data Exchange (ETDEWEB)

    Ledieu, A

    2004-10-01

    This work is concerned with the corrosion of borosilicate glasses with variable oxide contents. The originality of this study is the complementary use of experiments and numerical simulations. This study is expected to contribute to a better understanding of the corrosion of nuclear waste confinement glasses. First, the corrosion of glasses containing only silicon, boron and sodium oxides has been studied. The kinetics of leaching show that the rate of leaching and the final degree of corrosion sharply depend on the boron content through a percolation mechanism. For some glass contents and some conditions of leaching, the layer which appears at the glass surface stops the release of soluble species (boron and sodium). This altered layer (also called the gel layer) has been characterized with nuclear magnetic resonance (NMR) and small angle X-ray scattering (SAXS) techniques. Second, additional elements have been included in the glass composition. It appears that calcium, zirconium or aluminum oxides strongly modify the final degree of corrosion so that the percolation properties of the boron sub-network is no more a sufficient explanation to account for the behavior of these glasses. Meanwhile, we have developed a theoretical model, based on the dissolution and the reprecipitation of the silicon. Kinetic Monte Carlo simulations have been used in order to test several concepts such as the boron percolation, the local reactivity of weakly soluble elements and the restructuring of the gel layer. This model has been fully validated by comparison with the results on the three oxide glasses. Then, it has been used as a comprehensive tool to investigate the paradoxical behavior of the aluminum and zirconium glasses: although these elements slow down the corrosion kinetics, they lead to a deeper final degree of corrosion. The main contribution of this work is that the final degree of corrosion of borosilicate glasses results from the competition of two opposite mechanisms

  12. Donner aux travailleurs du sexe les moyens de consigner les ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Dans la plupart des sociétés, le travail du sexe est fortement stigmatisé, et ceux qui le pratiquent sont en butte aux reproches, à la désapprobation et à la discrimination. Par conséquent, la violence faite aux travailleurs du sexe se voit peu, et dans certains contextes, elle est même tolérée. On dispose donc de très peu de ...

  13. Communications en cas de catastrophe faisant appel aux TIC pour ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Communications en cas de catastrophe faisant appel aux TIC pour les collectivités vulnérables des Caraïbes. De récents événements survenus dans les Caraïbes ont mis en relief les insuffisances des mesures régionales et nationales de préparation aux catastrophes. On manque particulièrement de systèmes d'alerte ...

  14. Advances in understanding the structure of borosilicate glasses: A Raman spectroscopy study

    Energy Technology Data Exchange (ETDEWEB)

    Manara, D.; Grandjean, A. [CEA Marcoule, Serv Confinement Deches and Vitrificat, DTCD, DEN - 30 (France); Neuville, D.R. [Institut Physique Globe, Physique des Mineraux et Magmas, CNRS, F-75252 Paris 05 (France)

    2009-05-15

    This study is focused on the behavior of ternary SiO{sub 2}-Na{sub 2}O-B{sub 2}O{sub 3} borosilicate glasses at temperatures between 298 and 1800 K. Unpolarized Raman spectra were measured up to high temperature. SiO{sub 2}-Na{sub 2}O-B{sub 2}O{sub 3} glass samples were prepared with different values of the ratio R [Na{sub 2}O]/[B{sub 2}O{sub 3}], while the ratio K = [SiO{sub 2}]/[B{sub 2}O{sub 3}] was kept constant and equal 2.12. Spectra were measured at room temperature in samples with 0.43 {<=} R {<=} 1.68, and the effect of the modifier content was clearly observed in these glasses, only in partial agreement with previous literature results. In particular, the formation in the glass of sodium-danburite units Na{sub 2}O-B{sub 2}O{sub 3}-2SiO{sub 2} was postulated. This feature led to a new assessment of R{sup *}, the critical value of R above which every new alkali atom added to the system breaks a Fo-O-Fo (Fo=glass former) bridge causing depolymerization of the glass. A revised formula is proposed to obtain the value of R{sup *} as a function of K. Raman spectra measured at high temperature yielded important information about the temperature-dependent evolution of the borosilicate system. In particular, borate and borosilicate units including tetra-coordinated boron seem to be unstable at high temperature, where the formation of metaborate chains or rings is fostered. Above 1500 degrees C, evaporation of borate compounds is clearly observed, stemming from the small sample size. (authors)

  15. Influence of Cu doping in borosilicate bioactive glass and the properties of its derived scaffolds

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Hui [School of Materials Science and Engineering, Tongji University, Shanghai 2001804 (China); Zhao, Shichang [Department of Orthopedic Surgery, Shanghai Sixth People' s Hospital, Shanghai Jiao Tong University, Shanghai 200233 (China); Xiao, Wei [Department of Materials Science and Engineering, and Center for Biomedical Science and Engineering, Missouri University of Science and Technology, Rolla, MO 65409-0340 (United States); Xue, Jingzhe [Department of Chemistry, Tongji University, Shanghai 200092 (China); Shen, Youqu [Department of Materials Science and Engineering, and Center for Biomedical Science and Engineering, Missouri University of Science and Technology, Rolla, MO 65409-0340 (United States); Zhou, Jie; Huang, Wenhai [School of Materials Science and Engineering, Tongji University, Shanghai 2001804 (China); Rahaman, Mohamed N. [Department of Materials Science and Engineering, and Center for Biomedical Science and Engineering, Missouri University of Science and Technology, Rolla, MO 65409-0340 (United States); Zhang, Changqing, E-mail: shzhangchangqing@163.com [Department of Orthopedic Surgery, Shanghai Sixth People' s Hospital, Shanghai Jiao Tong University, Shanghai 200233 (China); Wang, Deping, E-mail: wdpshk@tongji.edu.cn [School of Materials Science and Engineering, Tongji University, Shanghai 2001804 (China)

    2016-01-01

    Copper doped borosilicate glasses (BG–Cu) were studied by means of FT-IR, Raman, UV–vis and NMR spectroscopies to investigate the changes that appeared in the structure of borosilicate glass matrix by doping copper ions. Micro-fil and immunohistochemistry analysis were applied to study the angiogenesis of its derived scaffolds in vivo. Results indicated that the Cu ions significantly increased the B–O bond of BO{sub 4} groups at 980 cm{sup −1}, while they decrease that of BO{sub 2}O{sup −} groups at 1440–1470 cm{sup −1} as shown by Raman spectra. A negative shift was observed from {sup 11}B and {sup 29}Si NMR spectra. The {sup 11}B NMR spectra exhibited a clear transformation from BO{sub 3} into BO{sub 4} groups, caused by the agglutination effect of the Cu ions and the charge balance of the agglomerate in the glass network, leading to a more stable glass network and lower ions release rate in the degradation process. Furthermore, the BG–Cu scaffolds significantly enhanced blood vessel formation in rat calvarial defects at 8 weeks post-implantation. Generally, it suggested that the introduction of Cu into borosilicate glass endowed glass and its derived scaffolds with good properties, and the cooperation of Cu with bioactive glass may pave a new way for tissue engineering. - Highlights: • Agglutination effect of Cu{sup 2+} and charge balance of agglomerate lead to more stable glass. • Lower degradability and lower ions release were found in BG-Cu scaffolds. • Excellent angiogenesis and sustain Cu{sup 2+} release were endowed by doping Cu.

  16. New insight into nanoparticle precipitation by electron beams in borosilicate glasses

    Science.gov (United States)

    Sabri, M. M.; Möbus, G.

    2017-06-01

    Nanoprecipitation in different oxide glasses by means of electron irradiation in transmission electron microscopy (TEM) has been compared in this study. Upon irradiation, groups or patterns of nanoparticles with various morphologies and sizes were formed in borosilicate glasses, loaded with zinc, copper, and silver. The study successfully includes loading ranges for the target metal from doping level (1%) over medium level (20%) to majority phase (60%). It is found that particle patterning resolution is affected by parallel processes of amorphous phase separation, glass ablation, and delocalised precipitation. In addition, via an in-situ study, it is confirmed that by heating alone without irradiation, no precipitate nanoparticles form.

  17. Photoelastic examination of borosilicate glass discs used in the insulating legs for the NSF tandem

    International Nuclear Information System (INIS)

    Acton, W.J.; Cundy, D.

    1981-04-01

    The results are presented of a photoelastic stress analysis carried out to establish the effect of re-annealing borosilicate glass discs used in the insulating legs of the 30 MV tandem van de Graaff accelerator of the NSF. The results show that re-annealing of the glass discs has no measurable effect on reducing the high stress at inclusions and re-emphasise the need to exercise great care in selecting suitable discs for use in the insulating legs. (U.K.)

  18. Preliminary assessment of the controlled release of radionuclides from waste packages containing borosilicate waste glass

    International Nuclear Information System (INIS)

    Strachan, D.M.; McGrail, B.P.; Apted, M.J.; Engle, D.W.; Eslinger, P.W.

    1990-06-01

    The purpose of this report is to provide a preliminary assessment of the release-rate for an engineered barriers subsystem (EBS) containing waste packages of defense high-level waste borosilicate glass at geochemical and hydrological conditions similar to the those at Yucca Mountain. The relationship between the proposed Waste Acceptance Preliminary Specifications (WAPS) test of glass- dissolution rate and compliance with the NRC's release-rate criterion is also evaluated. Calculations are reported for three hierarchical levels: EBS analysis, waste-package analysis, and waste-glass analysis. The following conclusions identify those factors that most acutely affect the magnitude of, or uncertainty in, release-rate performance

  19. High-level waste borosilicate glass: A compendium of corrosion characteristics. Volume 3

    International Nuclear Information System (INIS)

    Cunnane, J.C.

    1994-03-01

    The objective of this document is to summarize scientific information pertinent to evaluating the extent to which high-level waste borosilicate glass corrosion and the associated radionuclide release processes are understood for the range of environmental conditions to which waste glass may be exposed in service. Alteration processes occurring within the bulk of the glass (e.g., devitrification and radiation-induced changes) are discussed insofar as they affect glass corrosion. Volume III contains a bibliography of glass corrosion studies, including studies that are not cited in Volumes I and II

  20. New insight into nanoparticle precipitation by electron beams in borosilicate glasses

    Energy Technology Data Exchange (ETDEWEB)

    Sabri, M.M.; Moebus, G. [University of Sheffield, Department of Materials Science and Engineering (United Kingdom)

    2017-06-15

    Nanoprecipitation in different oxide glasses by means of electron irradiation in transmission electron microscopy (TEM) has been compared in this study. Upon irradiation, groups or patterns of nanoparticles with various morphologies and sizes were formed in borosilicate glasses, loaded with zinc, copper, and silver. The study successfully includes loading ranges for the target metal from doping level (1%) over medium level (20%) to majority phase (60%). It is found that particle patterning resolution is affected by parallel processes of amorphous phase separation, glass ablation, and delocalised precipitation. In addition, via an in-situ study, it is confirmed that by heating alone without irradiation, no precipitate nanoparticles form. (orig.)

  1. Determination of boron in borosilicate glasses by neutron capture prompt gamma-ray activation analysis

    Energy Technology Data Exchange (ETDEWEB)

    Riley, Jr, J E; Lindstrom, R M

    1987-01-01

    Major levels of boron in borosilicate glasses were determined nondestructively by neutron activation analysis. The effects of neutron self-shielding by boron (1 to 8% by weight) are examined. Results of the analysis of a series of glasses with increasing boron composition are 1.150 +- .005% and 7.766 +- .035% for the low and high members of the series. Once analyzed, the glasses are useful as secondary standards for alpha track counting, and also ion and electron microprobe analyses of glasses. 12 refs.; 3 tables.

  2. A review of phase separation in borosilicate glasses, with reference to nuclear fuel waste immobilization

    International Nuclear Information System (INIS)

    Taylor, P.

    1990-08-01

    This report reviews information on miscibility limits in borosilicate glass-forming systems. It includes both a literature survey and an account of experimental work performed within the Canadian Nuclear Fuel Waste Management Program. Emphasis is placed on the measurement and depiction of miscibility limits in multicomponent (mainly quaternary) systems, and the effects of individual components on the occurrence of phase separation. The behaviour of the multicomponent system is related to that of simpler (binary and ternary) glass systems. The possible occurrence of phase separation, as well as its avoidance, during processing of nuclear waste glasses is discussed

  3. Influence of iron ions on the structural properties of Zn-borosilicate glasses

    International Nuclear Information System (INIS)

    Music, S.; Gotic, M.; Popovic, S.

    1989-01-01

    The objectives of this study were to determine the influence of iron ions on the appearance of crystalline phases in Zn-borosilicate glasses, and to obtain information about valence state and coordination of iron ions. The systems Na 2 O-ZnO-B 2 O 3 -SiO 2 and ZnO-B 2 O 3 -SiO 2 were doped with α-Fe 2 O 3 . X-ray diffraction, IR spectroscopy and 57 Fe Moessbauer spectroscopy were used as experimental techniques. (author) 32 refs.; 5 figs.; 5 tabs

  4. High-level waste borosilicate glass: A compendium of corrosion characteristics. Volume 3

    Energy Technology Data Exchange (ETDEWEB)

    Cunnane, J.C. [comp.; Bates, J.K.; Bradley, C.R. [Argonne National Lab., IL (United States)] [and others

    1994-03-01

    The objective of this document is to summarize scientific information pertinent to evaluating the extent to which high-level waste borosilicate glass corrosion and the associated radionuclide release processes are understood for the range of environmental conditions to which waste glass may be exposed in service. Alteration processes occurring within the bulk of the glass (e.g., devitrification and radiation-induced changes) are discussed insofar as they affect glass corrosion. Volume III contains a bibliography of glass corrosion studies, including studies that are not cited in Volumes I and II.

  5. X-ray absorption and Raman spectroscopy studies of molybdenum environments in borosilicate waste glasses

    Energy Technology Data Exchange (ETDEWEB)

    McKeown, David A., E-mail: davidm@vsl.cua.edu; Gan, Hao; Pegg, Ian L.

    2017-05-15

    Mo-containing high-level nuclear waste borosilicate glasses were investigated as part of an effort to improve Mo loading while avoiding yellow phase crystallization. Previous work showed that additions of vanadium decrease yellow phase formation and increases Mo solubility. X-ray absorption spectroscopy (XAS) and Raman spectroscopy were used to characterize Mo environments in HLW borosilicate glasses and to investigate possible structural relationships between Mo and V. Mo XAS spectra for the glasses indicate isolated tetrahedral Mo{sup 6+}O{sub 4} with Mo-O distances near 1.75 Å. V XANES indicate tetrahedral V{sup 5+}O{sub 4} as the dominant species. Raman spectra show composition dependent trends, where Mo-O symmetrical stretch mode frequencies (ν{sub 1}) are sensitive to the mix of alkali and alkaline earth cations, decreasing by up to 10 cm{sup −1} for glasses that change from Li{sup +} to Na{sup +} as the dominant network-modifying species. This indicates that MoO{sub 4} tetrahedra are isolated from the borosilicate network and are surrounded, at least partly, by Na{sup +} and Li{sup +}. Secondary ν{sub 1} frequency effects, with changes up to 7 cm{sup −1}, were also observed with increasing V{sub 2}O{sub 5} and MoO{sub 3} content. These secondary trends may indicate MoO{sub 4}-MoO{sub 4} and MoO{sub 4}-VO{sub 4} clustering, suggesting that V additions may stabilize Mo in the matrix with respect to yellow phase formation. - Highlights: •Raman and XAS data indicate isolated MoO{sub 4} tetrahedra from the borosilicate network. •Mo-O stretch frequency is sensitive to network-modifying Li and Na concentrations. •Mo-O stretch frequency shifts were also seen with increasing V{sub 2}O{sub 5} and MoO{sub 3} content. •The Raman trends may indicate MoO{sub 4}-MoO{sub 4} and MoO{sub 4}-VO{sub 4} clustering in the glass. •V may stabilize Mo in the glass matrix avoiding yellow phase formation.

  6. Conversion of radwaste-loaded zeolites into a borosilicate glass to improve their properties for final disposal (preliminary results)

    International Nuclear Information System (INIS)

    Kazemian, H.; Ghannadi Maraghe, M.; Mallah, M.H.; Firooz Zare, M.; Kooshkestani, R.; Naghavi, S.Sh.

    2002-01-01

    Research was undertaken to fix radioisotopes from simulated nuclear waste streams into durable and stable borosilicate glass matrices based on the conversion of different type of zeolites. It was found that the selectivity of Iranian clinoptilolite and the relevant synthetic zeolite toward cesium and strontium were quite good whereas the leach resistance of the loaded zeolite was relatively poor. To improve the leach resistance of the used zeolites, conversion of the spent exchangers into borosilicate glass was investigated. Results obtained in the non active bench scale tests phase were promising. It is concluded that spent zeolites loaded with radioactive materials can be converted into a durable, high leach resistant borosilicate glass, a proper matrix for final disposal of nuclear waste. (author)

  7. Communication des risques reliés aux changements climatiques en ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    1 janv. 2012 ... Il incombe bien sûr aux gouvernements locaux et nationaux de prendre les décisions relatives à l'adaptation aux changements climatiques; ils doivent toutefois les communiquer aux ménages, aux groupes communautaires et aux entreprises privées afin que ceux-ci prennent les décisions qui s'imposent ...

  8. Aux limites de la physique les paradoxes quantiques

    CERN Document Server

    Rothen, François

    2012-01-01

    Dans l’esprit des pères fondateurs de la science moderne, les phénomènes matériels se déroulent selon un schéma unique. La cause précède nécessairement l’effet, et la connaissance de l’effet permet de remonter à la cause. Sur la scène de la nature, le hasard n’occupe qu’une place congrue. On ne fait appel à lui que pour pallier notre ignorance. Dans les années 1920, la révolution quantique bouleverse ce cadre rigide. Elle accorde une place de choix au hasard, si malmené jusqu’alors, puis elle met en scène une constellation de phénomènes inexplicables aux yeux de la science dite classique. Après une courte introduction historique, l’auteur met ses lecteurs au contact de certains de ces phénomènes si contraires à l’intuition. Refusant l’aide du langage mathématique, il les convie à pénétrer dans un monde quantique qui déconcerte le novice avant de l’éblouir par sa nouveauté et sa cohérence. Un accent particulier est mis sur une application nouvelle de la physiqu...

  9. PLUTONIUM SOLUBILITY IN HIGH-LEVEL WASTE ALKALI BOROSILICATE GLASS

    Energy Technology Data Exchange (ETDEWEB)

    Marra, J.; Crawford, C.; Fox, K.; Bibler, N.

    2011-01-04

    The solubility of plutonium in a Sludge Batch 6 (SB6) reference glass and the effect of incorporation of Pu in the glass on specific glass properties were evaluated. A Pu loading of 1 wt % in glass was studied. Prior to actual plutonium glass testing, surrogate testing (using Hf as a surrogate for Pu) was conducted to evaluate the homogeneity of significant quantities of Hf (Pu) in the glass, determine the most appropriate methods to evaluate homogeneity for Pu glass testing, and to evaluate the impact of Hf loading in the glass on select glass properties. Surrogate testing was conducted using Hf to represent between 0 and 1 wt % Pu in glass on an equivalent molar basis. A Pu loading of 1 wt % in glass translated to {approx}18 kg Pu per Defense Waste Processing Facility (DWPF) canister, or about 10X the current allowed limit per the Waste Acceptance Product Specifications (2500 g/m{sup 3} of glass or about 1700 g/canister) and about 30X the current allowable concentration based on the fissile material concentration limit referenced in the Yucca Mountain Project License Application (897 g/m{sup 3}3 of glass or about 600 g Pu/canister). Based on historical process throughput data, this level was considered to represent a reasonable upper bound for Pu loading based on the ability to provide Pu containing feed to the DWPF. The task elements included evaluating the distribution of Pu in the glass (e.g. homogeneity), evaluating crystallization within the glass, evaluating select glass properties (with surrogates), and evaluating durability using the Product Consistency Test -- Method A (PCT-A). The behavior of Pu in the melter was evaluated using paper studies and corresponding analyses of DWPF melter pour samples.The results of the testing indicated that at 1 wt % Pu in the glass, the Pu was homogeneously distributed and did not result in any formation of plutonium-containing crystalline phases as long as the glass was prepared under 'well-mixed' conditions

  10. Plutonium Solubility In High-Level Waste Alkali Borosilicate Glass

    International Nuclear Information System (INIS)

    Marra, J.; Crawford, C.; Fox, K.; Bibler, N.

    2011-01-01

    The solubility of plutonium in a Sludge Batch 6 (SB6) reference glass and the effect of incorporation of Pu in the glass on specific glass properties were evaluated. A Pu loading of 1 wt % in glass was studied. Prior to actual plutonium glass testing, surrogate testing (using Hf as a surrogate for Pu) was conducted to evaluate the homogeneity of significant quantities of Hf (Pu) in the glass, determine the most appropriate methods to evaluate homogeneity for Pu glass testing, and to evaluate the impact of Hf loading in the glass on select glass properties. Surrogate testing was conducted using Hf to represent between 0 and 1 wt % Pu in glass on an equivalent molar basis. A Pu loading of 1 wt % in glass translated to ∼18 kg Pu per Defense Waste Processing Facility (DWPF) canister, or about 10X the current allowed limit per the Waste Acceptance Product Specifications (2500 g/m 3 of glass or about 1700 g/canister) and about 30X the current allowable concentration based on the fissile material concentration limit referenced in the Yucca Mountain Project License Application (897 g/m 3 3 of glass or about 600 g Pu/canister). Based on historical process throughput data, this level was considered to represent a reasonable upper bound for Pu loading based on the ability to provide Pu containing feed to the DWPF. The task elements included evaluating the distribution of Pu in the glass (e.g. homogeneity), evaluating crystallization within the glass, evaluating select glass properties (with surrogates), and evaluating durability using the Product Consistency Test -- Method A (PCT-A). The behavior of Pu in the melter was evaluated using paper studies and corresponding analyses of DWPF melter pour samples.The results of the testing indicated that at 1 wt % Pu in the glass, the Pu was homogeneously distributed and did not result in any formation of plutonium-containing crystalline phases as long as the glass was prepared under 'well-mixed' conditions. The incorporation of 1 wt

  11. Performance of borosilicate glass, Synroc and spent fuel as nuclear waste forms

    International Nuclear Information System (INIS)

    Lutze, W.; Grambow, B.; Ewing, R.C.

    1990-01-01

    Presently, there are three prominent waste forms under consideration for the disposal of high-level waste: Borosilicate glass and Synroc for high-level radioactive waste from fuel reprocessing and spent fuel as the waste form for non-reprocessed fuel. Using the present experimental data base, one may compare the performance of these three waste forms under repository relevant conditions. In low water flow regimes and at temperatures less than 100 degree C, the fractional release rates of all three waste forms are low, on the order of 10-7/d or less and may decrease with time. Under these conditions the three waste forms behave similarly. At elevated temperatures or in high flow regimes, the durability of borosilicate glass will be much less than that of Synroc, and thus, for certain disposal schemes (e.g., deep burial) Synroc is preferable. All predictions of the long-term behavior are based on the extrapolation of short term experimental data, we point out that appropriate and useful natural analogues are available for each of these waste forms and should be used in the performance assessment of each waste form's long-term behavior. 14 refs

  12. Optical and structural investigation on sodium borosilicate glasses doped with Cr2O3

    Science.gov (United States)

    Ebrahimi, E.; Rezvani, M.

    2018-02-01

    In this work, Sodium borosilicate glasses with chemical composition of 60% SiO2-20% B2O3-20%Na2O doped with different contents of Cr2O3 were prepared by melting-quenching method. Physical, structural and optical properties of glasses were investigated by studying density and molar volume, Fourier Transform Infrared (FT-IR) Spectra and UV-visible absorption spectroscopy. The results showed an increase in density of glasses with the increase of Cr2O3 that can be due to addition of oxide with high molar mass. The optical absorption spectra of un-doped glass reveals UV absorption due to trace iron impurities with no visible band however Cr2O3 doped glasses shows absorption in visible range that are characteristic. Increasing of Cr3 + ions in the glassy microstructure of samples provides a semiconducting character to Sodium borosilicate glass by reducing the direct and indirect optical band gaps of glass samples from 3.79 to 2.59 (ev) and 3.36 to 2.09 (ev), respectively. These changes could be attributed to the role of Cr3 + ions as the network former which asserts improvement of semiconducting behavior in presence of Cr2O3.

  13. Chemical durability of borosilicate glasses containing simulated high-level nuclear wastes, 1

    International Nuclear Information System (INIS)

    Hara, Shigeo; Terai, Ryohei; Yamanaka, Hiroshi

    1983-01-01

    The Soxhlet-type leaching test apparatus has been developed to evaluate the chemical durability of some borosilicate glasses containing simulated High-Level nuclear Wastes, HLW. After the leaching over the temperature range of 50 0 -95 0 C, the weight loss of specimens with time was determined on both the samples of blocks and grains, and various components dissolved into water were analyzed by atomic absorption and colorimetry technique. It was found that Soxhlet-type test method was more useful than JIS test method, because the specimens in Soxhlet type apparatus were forced always to react with pure water and the mechanism of leaching could be evaluate accurately. The chemical durability of commercial glasses decreases generally with increasing of alkali contents in glasses. In the case of these borosilicate glasses containing HLW, however, the leachability was apparently independent on the alkali contents because of the complexity of these glass compositions. The variation of leaching rate with temperature suggests that dissolution mechanism changes with temperature. (author)

  14. Dielectric behaviour of (Ba,Sr)TiO3 perovskite borosilicate glass ceramics

    International Nuclear Information System (INIS)

    Yadav, Avadhesh Kumar; Gautam, C.R.

    2013-01-01

    Various perovskite (Ba,Sr)TiO 3 borosilicate glasses were prepared by rapid melt-quench technique in the glass system ((Ba 1-x Sr x ).TiO 3 )-(2SiO 2 .B 2 O 3 )-(K 2 O)-(La 2 O 3 ). On the basis of differential thermal analysis results, glasses were converted into glass ceramic samples by regulated heat treatment schedules. The dielectric behaviour of crystallized barium strontium titanate borosilicate glass ceramic samples shows diffuse phase transition. The study depicts the dielectric behaviour of glass ceramic sample BST5K1L0.2S814. The double relaxation was observed in glass ceramic samples corresponding 80/20% Ba/Sr due to change in crystal structure from orthorhombic to tetragonal and tetragonal to cubic with variation of temperature. The highest value of dielectric constant was found to be 48289 for the glass ceramic sample BST5K1L0.2S814. The high value of dielectric constant attributed to space charge polarization between the glassy phase and perovskite phase. Due to very high value of dielectric constant, such glass ceramics are used for high energy storage devices. La 2 O 3 acts as nucleating agent for crystallization of glass to glass ceramics and enhances the dielectric constant and retarded dielectric loss. Such glass ceramics can be used in high energy storage devices such as barrier layer capacitors, multilayer capacitors etc. (author)

  15. Rhenium solubility in borosilicate nuclear waste glass: implications for the processing and immobilization of technetium-99.

    Science.gov (United States)

    McCloy, John S; Riley, Brian J; Goel, Ashutosh; Liezers, Martin; Schweiger, Michael J; Rodriguez, Carmen P; Hrma, Pavel; Kim, Dong-Sang; Lukens, Wayne W; Kruger, Albert A

    2012-11-20

    The immobilization of technetium-99 ((99)Tc) in a suitable host matrix has proven to be a challenging task for researchers in the nuclear waste community around the world. In this context, the present work reports on the solubility and retention of rhenium, a nonradioactive surrogate for (99)Tc, in a sodium borosilicate glass. Glasses containing target Re concentrations from 0 to 10,000 ppm [by mass, added as KReO(4) (Re(7+))] were synthesized in vacuum-sealed quartz ampules to minimize the loss of Re from volatilization during melting at 1000 °C. The rhenium was found as Re(7+) in all of the glasses as observed by X-ray absorption near-edge structure. The solubility of Re in borosilicate glasses was determined to be ~3000 ppm (by mass) using inductively coupled plasma optical emission spectroscopy. At higher rhenium concentrations, additional rhenium was retained in the glasses as crystalline inclusions of alkali perrhenates detected with X-ray diffraction. Since (99)Tc concentrations in a glass waste form are predicted to be wastes, assuming Tc as Tc(7+) and similarities between Re(7+) and Tc(7+) behavior in this glass system.

  16. Er3+-Al2O3 nanoparticles doping of borosilicate glass

    International Nuclear Information System (INIS)

    Massera, Jonathan; Petit, Laeticia; Hupa, Leena; Hupa, Mikko; Koponen, Joona; Glorieux, Benoit

    2015-01-01

    Novel borosilicate glasses were developed by adding in the glass batch Er 3+ -Al 2 O 3 nanoparticles synthetized by using a soft chemical method. A similar nanoparticle doping with modified chemical vapour deposition (MCVD) process was developed to increase the efficiency of the amplifying silica fibre in comparison to using MCVD and solution doping. It was shown that with the melt quench technique, a Er 3+ -Al 2 O 3 nanoparticle doping neither leads to an increase in the Er 3+ luminescence properties nor allows one to control the rare-earth chemical environment in a borosilicate glass. The site of Er 3+ in the Er 3+ -Al 2 O 3 nanoparticle containing glass seems to be similar as in glasses with the same composition prepared using standard raw materials. We suspect the Er 3+ ions to diffuse from the nanoparticles into the glass matrix. There was no clear evidence of the presence of Al 2 O 3 nanoparticles in the glasses after melting. (author)

  17. A kinetic approach of sulphur behaviour in borosilicate glasses and melts: implications for sulphate incorporation in nuclear waste glasses

    Energy Technology Data Exchange (ETDEWEB)

    Lenoir, Marion [Service de Confinement des Dechets et Vitrification - Laboratoire d' Etudes de Base sur les Verres, CEA Valrho, Centre de Marcoule, 30207 Bagnols sur Ceze (France); Physique des Mineraux et des Magmas, UMR 7047 - CNRS, Institut de Physique du Globe de Paris, 7 place Jussieu, 75252 Paris Cedex 05 (France); Grandjean, Agnes [Service de Confinement des Dechets et Vitrification - Laboratoire d' Etudes de Base sur les Verres, CEA Valrho, Centre de Marcoule, 30207 Bagnols sur Ceze (France); Neuville, Daniel R. [Physique des Mineraux et des Magmas, UMR 7047 - CNRS, Institut de Physique du Globe de Paris, 7 place Jussieu, 75252 Paris Cedex 05 (France)

    2008-07-01

    The kinetics of sulphate decomposition in a borosilicate melt were studied using in situ Raman spectroscopy. This technique permits the quantification of the amount of sulphate dissolved in a borosilicate glass as a function of heating time by comparison with measurements obtained by microprobe WDS (Wavelength Dispersive Spectrometry). In order to quantify the content of sulphate obtained by Raman spectroscopy, the integrated intensity of the sulphate band at 985 cm{sup -1} was scaled to the sum of the integrated bands between 800 and 1200 cm{sup -1}, bands that are assigned to Q{sup n} silica units on the basis of previous literature. Viscosities of some borosilicate glasses are also presented here in order to study the kinetics of sulphate decomposition as a function of the viscosity of the melt. This underlines the importance of variations in viscosity depending on the composition of the melt and thus shows that viscosity is an important parameter governing the kinetics of decomposition of sulphate in borosilicate glasses. (authors)

  18. Effects of system size and cooling rate on the structure and properties of sodium borosilicate glasses from molecular dynamics simulations.

    Science.gov (United States)

    Deng, Lu; Du, Jincheng

    2018-01-14

    Borosilicate glasses form an important glass forming system in both glass science and technologies. The structure and property changes of borosilicate glasses as a function of thermal history in terms of cooling rate during glass formation and simulation system sizes used in classical molecular dynamics (MD) simulation were investigated with recently developed composition dependent partial charge potentials. Short and medium range structural features such as boron coordination, Si and B Q n distributions, and ring size distributions were analyzed to elucidate the effects of cooling rate and simulation system size on these structure features and selected glass properties such as glass transition temperature, vibration density of states, and mechanical properties. Neutron structure factors, neutron broadened pair distribution functions, and vibrational density of states were calculated and compared with results from experiments as well as ab initio calculations to validate the structure models. The results clearly indicate that both cooling rate and system size play an important role on the structures of these glasses, mainly by affecting the 3 B and 4 B distributions and consequently properties of the glasses. It was also found that different structure features and properties converge at different sizes or cooling rates; thus convergence tests are needed in simulations of the borosilicate glasses depending on the targeted properties. The results also shed light on the complex thermal history dependence on structure and properties in borosilicate glasses and the protocols in MD simulations of these and other glass materials.

  19. Effects of system size and cooling rate on the structure and properties of sodium borosilicate glasses from molecular dynamics simulations

    Science.gov (United States)

    Deng, Lu; Du, Jincheng

    2018-01-01

    Borosilicate glasses form an important glass forming system in both glass science and technologies. The structure and property changes of borosilicate glasses as a function of thermal history in terms of cooling rate during glass formation and simulation system sizes used in classical molecular dynamics (MD) simulation were investigated with recently developed composition dependent partial charge potentials. Short and medium range structural features such as boron coordination, Si and B Qn distributions, and ring size distributions were analyzed to elucidate the effects of cooling rate and simulation system size on these structure features and selected glass properties such as glass transition temperature, vibration density of states, and mechanical properties. Neutron structure factors, neutron broadened pair distribution functions, and vibrational density of states were calculated and compared with results from experiments as well as ab initio calculations to validate the structure models. The results clearly indicate that both cooling rate and system size play an important role on the structures of these glasses, mainly by affecting the 3B and 4B distributions and consequently properties of the glasses. It was also found that different structure features and properties converge at different sizes or cooling rates; thus convergence tests are needed in simulations of the borosilicate glasses depending on the targeted properties. The results also shed light on the complex thermal history dependence on structure and properties in borosilicate glasses and the protocols in MD simulations of these and other glass materials.

  20. Localized iron supply triggers lateral root elongation in Arabidopsis by altering the AUX1-mediated auxin distribution.

    Science.gov (United States)

    Giehl, Ricardo F H; Lima, Joni E; von Wirén, Nicolaus

    2012-01-01

    Root system architecture depends on nutrient availability, which shapes primary and lateral root development in a nutrient-specific manner. To better understand how nutrient signals are integrated into root developmental programs, we investigated the morphological response of Arabidopsis thaliana roots to iron (Fe). Relative to a homogeneous supply, localized Fe supply in horizontally separated agar plates doubled lateral root length without having a differential effect on lateral root number. In the Fe uptake-defective mutant iron-regulated transporter1 (irt1), lateral root development was severely repressed, but a requirement for IRT1 could be circumvented by Fe application to shoots, indicating that symplastic Fe triggered the local elongation of lateral roots. The Fe-stimulated emergence of lateral root primordia and root cell elongation depended on the rootward auxin stream and was accompanied by a higher activity of the auxin reporter DR5-β-glucuronidase in lateral root apices. A crucial role of the auxin transporter AUXIN RESISTANT1 (AUX1) in Fe-triggered lateral root elongation was indicated by Fe-responsive AUX1 promoter activities in lateral root apices and by the failure of the aux1-T mutant to elongate lateral roots into Fe-enriched agar patches. We conclude that a local symplastic Fe gradient in lateral roots upregulates AUX1 to accumulate auxin in lateral root apices as a prerequisite for lateral root elongation.

  1. Comparison of SRP high-level waste disposal costs for borosilicate glass and crystalline ceramic waste forms

    International Nuclear Information System (INIS)

    McDonell, W.R.

    1982-04-01

    An evaluation of costs for the immobilization and repository disposal of SRP high-level wastes indicates that the borosilicate glass waste form is less costly than the crystalline ceramic waste form. The wastes were assumed immobilized as glass with 28% waste loading in 10,300 reference 24-in.-diameter canisters or as crystalline ceramic with 65% waste loading in either 3400 24-in.-diameter canisters or 5900 18-in.-diameter canisters. After an interim period of onsite storage, the canisters would be transported to the federal repository for burial. Total costs in undiscounted 1981 dollars of the waste disposal operations, excluding salt processing for which costs are not yet well defined, were about $2500 million for the borosilicate glass form in reference 24-in.-diameter canisters, compared to about $2900 million for the crystalline ceramic form in 24-in.-diameter canisters and about $3100 million for the crystalline ceramic form in 18-in.-diameter canisters. No large differences in salt processing costs for the borosilicate glass and crystalline ceramic forms are expected. Discounting to present values, because of a projected 2-year delay in startup of the DWPF for the crystalline ceramic form, preserved the overall cost advantage of the borosilicate glass form. The waste immobilization operations for the glass form were much less costly than for the crystalline ceramic form. The waste disposal operations, in contrast, were less costly for the crystalline ceramic form, due to fewer canisters requiring disposal; however, this advantage was not sufficient to offset the higher development and processing costs of the crystalline ceramic form. Changes in proposed Nuclear Regulatory Commission regulations to permit lower cost repository packages for defense high-level wastes would decrease the waste disposal costs of the more numerous borosilicate glass forms relative to the crystalline ceramic forms

  2. Communication Received from Certain Member States Regarding Guidelines for Transfers of Nuclear-related Dual-use Equipment, Material, Software and Related Technology; Communication recue de certains Etats Membres concernant les directives applicables aux transferts d'equipements, de matieres et de logiciels a double usage dans le domaine nucleaire, ainsi que de technologies connexes

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-09-09

    The Agency has received a Note Verbale from the Permanent Mission of Hungary, dated 14 June 2010, in which it requests that the Agency circulate to all Member States a letter of 7 May 2010 from the Chairman of the Nuclear Suppliers Group, Ambassador Ms. Gyorgyi Martin Zanathy, to the Director General, on behalf of the Governments of Argentina, Australia, Austria, Belarus, Belgium, Brazil, Bulgaria, Canada, China, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Japan, Kazakhstan, Republic of Korea, Latvia, Lithuania, Luxemburg, Malta, Netherlands, New Zealand, Norway, Poland, Portugal, Romania, Russian Federation, Slovakia, Slovenia, South Africa, Spain, Sweden, Switzerland, Turkey, Ukraine, the United Kingdom of Great Britain and Northern Ireland and the United States of America,1 providing further information on those Governments' Guidelines for Nuclear Transfers [French] L'Agence a recu une note verbale de la mission permanente de la Hongrie, en date du 14 juin 010, lui demandant de communiquer a tous les Etats Membres une lettre du 7 mai 2010 du president du Groupe des fournisseurs nucleaires, l'ambassadeur Gyorgyi Martin Zanathy, adressee au Directeur general au nom des gouvernements des Etats suivants : Afrique du Sud, Allemagne, Argentine, Australie, Autriche, Belarus, Belgique, Bresil, Bulgarie, Canada, Chine, Croatie, Chypre, Danemark, Espagne, Estonie, Etats-Unis d'Amerique, Federation de Russie, Finlande, France, Grece, Hongrie, Irlande, Islande, Italie, Japon, Kazakhstan, Lettonie, Lituanie, Luxembourg, Malte, Norvege, Nouvelle-Zelande, Pays-Bas, Pologne, Portugal, Republique de Coree, Republique tcheque, Roumanie, Royaume-Uni de Grande-Bretagne et d'Irlande du Nord, Slovaquie, Slovenie, Suede, Suisse, Turquie et Ukraine1. Cette lettre apporte des informations supplementaires sur les Directives de ces gouvernements applicables aux transferts nucleaires.

  3. Operating Range for High Temperature Borosilicate Waste Glasses: (Simulated Hanford Enveloped)

    International Nuclear Information System (INIS)

    Mohammad, J.; Ramsey, W. G.; Toghiani, R. K.

    2003-01-01

    The following results are a part of an independent thesis study conducted at Diagnostic Instrumentation and Analysis Laboratory-Mississippi State University. A series of small-scale borosilicate glass melts from high-level waste simulant were produced with waste loadings ranging from 20% to 55% (by mass). Crushed glass was allowed to react in an aqueous environment under static conditions for 7 days. The data obtained from the chemical analysis of the leachate solutions were used to test the durability of the resulting glasses. Studies were performed to determine the qualitative effects of increasing the B2O3 content on the overall waste glass leaching behavior. Structural changes in a glass arising due to B2O3 were detected indirectly by its chemical durability, which is a strong function of composition and structure. Modeling was performed to predict glass durability quantitatively in an aqueous environment as a direct function of oxide composition

  4. Effect of MoO3 addition on phase separation in borosilicate glasses

    International Nuclear Information System (INIS)

    Wakabayashi, Hajimu; Yamanaka, Hiroshi; Terai, Ryohei; Fukumoto, Shinji.

    1987-01-01

    The effect of MoO 3 addition on the phase separation of sodium borosilicate glasses has been studied by electron microscopic observation and electrical conductivity measurement. With increasing MoO 3 addition, the immiscibility temperatures rose, the growth rate of phase separation increased, and the immiscibility region in the Na 2 O-B 2 O 3 -SiO 2 system extended. When MoO 3 more than 5 mol% was added to the glasses, two stages of phase separation appeared ; one is metastable immiscibility, which takes place below the liquidus temperature, and the other is stable immiscibility, occurring above the liquidus temperature. The present experiment confirmed that the conductivity measurement of molten glasses is usefull to detect phase separation in the glasses, giving some suggestions for preventing the separation of molybdates in nuclear waste glasses and also for controlling the micro-pore sizes of porous glasses. (author)

  5. Heat accumulation during high repetition rate ultrafast laser interaction: Waveguide writing in borosilicate glass

    International Nuclear Information System (INIS)

    Zhang, Haibin; Eaton, Shane M; Li, Jianzhao; Herman, Peter R

    2007-01-01

    During high repetition rate (>200 kHz) ultrafast laser waveguide writing, visible heat modified zones surrounding the formed waveguide occur as a result of heat accumulation. The radii of the heat-modified zones increase with the laser net fluence, and were found to correlate with the formation of low-loss and cylindrically symmetric optical waveguides. A numerical thermal model based on the finite difference method is applied here to account for cumulative heating and diffusion effects. The model successfully shows that heat propagation and accumulation accurately predict the radius of the 'heat modified' zones observed in borosilicate glass waveguides formed across a wide range of laser exposure conditions. Such modelling promises better control of thermal effects for optimizing the fabrication and performance of three-dimensional optical devices in transparent materials

  6. Energy transfer and cross-relaxation in Tb3+-doped borosilicate glasses

    International Nuclear Information System (INIS)

    Kim, Jung Hwan; Sol, Jung Sik

    1990-01-01

    Energy transfer in Tb 3+ -doped borosilicate glasses has been studied by the analysis of fluorescence intensities and lifetimes of 5 D 3 and 5 D 4 states as a function of Tb 3+ concentration. It is shown that as the Tb 3+ concentration is increased the cross-relaxation produces high population of the 5 D 4 state at the expense of 5 D 3 . It is also found that this interaction is predominantly dipole-dipole transition with critical distance of 13 A. The critical distance for energy transfer 5 D 4 5 D 3 which is responsible for the quenching of 5 D 4 emission at high concentration of Tb 3+ ions is 4.5 A. (Author)

  7. Determination of iron redox ratio in borosilicate glasses and melts from Raman spectra

    Energy Technology Data Exchange (ETDEWEB)

    Cochain, B. [SCDV-Laboratoire d' Etudes de Base sur les Verres, CEA Valrho, Centre de Marcoule, 30207 Bagnols-sur-ceze (France); Physique des Mineraux et des Magmas, CNRS-IPGP, 4 place Jussieu, 75252 Paris Cedex05 (France); Neuville, D.R.; Richet, P. [Physique des Mineraux et des Magmas, CNRS-IPGP, 4 place Jussieu, 75252 Paris Cedex05 (France); Henderson, G.S. [Dept of Geology, University of Toronto, 22 Russell Street, Toronto (Canada); Pinet, O. [SCDV-Laboratoire d' Etudes de Base sur les Verres, CEA Valrho, Centre de Marcoule, 30207 Bagnols-sur-ceze (France)

    2008-07-01

    A method is presented to determine the redox ratio of iron in borosilicate glasses and melts relevant to nuclear waste storage from an analysis of Raman spectra recorded at room or high temperature. The basis of this method is the strong variation of the spectral feature observed between 800 and 1200 cm{sup -1}, in which it is possible to assign a band to vibrational modes involving ferric iron in tetrahedral coordination whose intensity increases with iron content and iron oxidation. After baseline correction and normalization, fits to the Raman spectra made with Gaussian bands enable us to determine the proportion of ferric iron provided the redox ratio is known independently for at least two redox states for a given glass composition. This method is particularly useful for in situ determinations of the kinetics and mechanisms of redox reactions. (authors)

  8. Electrical characterization of strontium titanate borosilicate glass ceramics system with bismuth oxide addition using impedance spectroscopy

    International Nuclear Information System (INIS)

    Thakur, O.P.; Kumar, Devendra; Parkash, Om; Pandey, Lakshman

    2003-01-01

    The ac electrical data, measured in the frequency range 0.1 kHz-1 MHz, were used to study the electrical response of strontium titanate borosilicate glass ceramic system with bismuth oxide addition. Complex plane plots from these electrical data for various glass ceramic samples reveal contributions from simultaneously operating polarization mechanisms to overall dielectric behavior. The complex modulus (M * ) representation of electrical data for various glass ceramic samples were found to be more informative. Equivalent circuit models, which represent the electrical behavior of glass ceramic samples, were determined using complex non-linear least square (CNLS) fitting. An attempt has been made to understand the dielectric behavior of various glass ceramics in terms of contributions arising from different polarization processes occurring at glassy matrix, crystalline phases, glass to crystal interface region and blocking electrodes. Glass ceramics containing SrTiO 3 and TiO 2 (rutile) phases show thermally stable dielectric behavior

  9. Determination of iron redox ratio in borosilicate glasses and melts from Raman spectra

    International Nuclear Information System (INIS)

    Cochain, B.; Neuville, D.R.; Richet, P.; Henderson, G.S.; Pinet, O.

    2008-01-01

    A method is presented to determine the redox ratio of iron in borosilicate glasses and melts relevant to nuclear waste storage from an analysis of Raman spectra recorded at room or high temperature. The basis of this method is the strong variation of the spectral feature observed between 800 and 1200 cm -1 , in which it is possible to assign a band to vibrational modes involving ferric iron in tetrahedral coordination whose intensity increases with iron content and iron oxidation. After baseline correction and normalization, fits to the Raman spectra made with Gaussian bands enable us to determine the proportion of ferric iron provided the redox ratio is known independently for at least two redox states for a given glass composition. This method is particularly useful for in situ determinations of the kinetics and mechanisms of redox reactions. (authors)

  10. Influence of Some Nuclear Waste on The Durability and Mechanical Properties of Borosilicate glass

    International Nuclear Information System (INIS)

    El-Alaily, N.A.

    2003-01-01

    Various glass systems have been shown to be suitable for producing waste glass forms that are thermally and mechanically stable and exhibit good chemical durability. In this study borosilicate glass containing sodium oxide and aluminum oxide was prepared as a host for high level nuclear waste. The glass durability when the samples were immersed either in distilled water or ground water at 70 degree was studied. The density, porosity and mechanical properties were also investigated. The effects of exposing the samples immersed in groundwater to gamma rays in the glass durability and all other mentioned properties were also studied. The results showed that immersing the glass in ground water causing a decrease in the glass durability. The exposure of the glass immersed in ground water to the gamma rays increases the durability of the glass. The mechanical properties of the prepared glass were good. Although these properties decrease for the corroded glass but they were still good

  11. Corrosion of inconel in high-temperature borosilicate glass melts containing simulant nuclear waste

    Science.gov (United States)

    Mao, Xianhe; Yuan, Xiaoning; Brigden, Clive T.; Tao, Jun; Hyatt, Neil C.; Miekina, Michal

    2017-10-01

    The corrosion behaviors of Inconel 601 in the borosilicate glass (MW glass) containing 25 wt.% of simulant Magnox waste, and in ZnO, Mn2O3 and Fe2O3 modified Mg/Ca borosilicate glasses (MZMF and CZMF glasses) containing 15 wt.% of simulant POCO waste, were evaluated by dimensional changes, the formation of internal defects and changes in alloy composition near corrosion surfaces. In all three kinds of glass melts, Cr at the inconel surface forms a protective Cr2O3 scale between the metal surface and the glass, and alumina precipitates penetrate from the metal surface or formed in-situ. The corrosion depths of inconel 601 in MW waste glass melt are greater than those in the other two glass melts. In MW glass, the Cr2O3 layer between inconel and glass is fragmented because of the reaction between MgO and Cr2O3, which forms the crystal phase MgCr2O4. In MZMF and CZMF waste glasses the layers are continuous and a thin (Zn, Fe, Ni, B)-containing layer forms on the surface of the chromium oxide layer and prevents Cr2O3 from reacting with MgO or other constituents. MgCr2O4 was observed in the XRD analysis of the bulk MW waste glass after the corrosion test, and ZrSiO4 in the MZMF waste glass, and ZrSiO4 and CaMoO4 in the CZMF waste glass.

  12. Comparison of radiation and quenching rate effects on the structure of a sodium borosilicate glass

    International Nuclear Information System (INIS)

    Peuget, Sylvain; Maugeri, Emilio-Andrea; Mendoza, Clement; Fares, Toby; Bouty, Olivier; Jegou, Christophe; Charpentier, Thibault; Moskura, Melanie

    2013-01-01

    The effects of quenching rate and irradiation on the structure of a sodium borosilicate glass were compared using 29 Si, 11 B, and 23 Na nuclear magnetic resonance and Raman spectroscopy. Quenching rate ranging from 0.1 to 3 * 10 4 K min -1 was studied. Various irradiation conditions were performed, i.e. gold-ion irradiation in a multi-energy mode (from 1 to 6.75 MeV), and Kr and Xe ion irradiations with energy of 74 and 92 MeV, respectively. In pile irradiation with thermal neutron flux was performed as well, to study the effect of alpha radiation from the nuclear reaction 10 B(n,α) 7 Li. Both irradiation and high quenching rate induce similar local order modification of the glass structure, mainly a decrease of the mean boron coordination and an increase of Q 3 units. Nevertheless, the variations observed under irradiation are more pronounced than the ones induced by the quenching rate. Moreover, some important modifications of the glass medium range order, i.e. the emergence of the D2 band associated to three members silica rings and a modification of the Si-O-Si angle distribution were only noticed after irradiation. These results suggest that the irradiated structure is certainly not exactly the one obtained by a rapidly quenched equilibrated melt, but rather a more disordered structure that was weakly relaxed during the very rapid quenching phase following the energy deposition step. Raman spectroscopy showed a similar irradiated structure whereas the glass evolutions were controlled by the electronic energy loss in the ion track formation regime for Kr-ion irradiation or by the nuclear energy loss for Au and OSIRIS irradiation. The similar irradiated structure despite different irradiation routes, suggests that the final structural state of this sodium borosilicate glass is mainly controlled by the glass reconstruction after the energy deposition step. (authors)

  13. Wetspun poly-L-(lactic acid)-borosilicate bioactive glass scaffolds for guided bone regeneration

    Energy Technology Data Exchange (ETDEWEB)

    Fernandes, João S., E-mail: joao.fernandes@dep.uminho.pt [3B' s Research Group - Biomaterials, Biodegradables and Biomimetics, University of Minho, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, AvePark-Parque de Ciência e Tecnologia, Zona Industrial da Gandra, 4805-017 Barco GMR (Portugal); ICVS/3B' s - PT Government Associate Laboratory, Braga/Guimarães (Portugal); Reis, Rui L. [3B' s Research Group - Biomaterials, Biodegradables and Biomimetics, University of Minho, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, AvePark-Parque de Ciência e Tecnologia, Zona Industrial da Gandra, 4805-017 Barco GMR (Portugal); ICVS/3B' s - PT Government Associate Laboratory, Braga/Guimarães (Portugal); Pires, Ricardo A., E-mail: rpires@dep.uminho.pt [3B' s Research Group - Biomaterials, Biodegradables and Biomimetics, University of Minho, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, AvePark-Parque de Ciência e Tecnologia, Zona Industrial da Gandra, 4805-017 Barco GMR (Portugal); ICVS/3B' s - PT Government Associate Laboratory, Braga/Guimarães (Portugal)

    2017-02-01

    We developed a porous poly-L-lactic acid (PLLA) scaffold compounded with borosilicate bioactive glasses (BBGs) endowing it with bioactive properties. Porous PLLA-BBG fibre mesh scaffolds were successfully prepared by the combination of wet spinning and fibre bonding techniques. Micro-computed tomography (μCT) confirmed that the PLLA-BBG scaffolds containing ≈ 25% of BBGs (w/w) exhibited randomly interconnected porous (58 to 62% of interconnectivity and 53 to 67% of porosity) with mean pore diameters higher that 100 μm. Bioactivity and degradation studies were performed by immersing the scaffolds in simulated body fluid (SBF) and ultrapure water, respectively. The PLLA-BBG scaffolds presented a faster degradation rate with a constant release of inorganic species, which are capable to produce calcium phosphate structures at the surface of the material after 7 days of immersion in SBF (Ca/P ratio of ~ 1.7). Cellular in vitro studies with human osteosarcoma cell line (Saos-2) and human adipose-derived stem cells (hASCs) showed that PLLA-BBGs are not cytotoxic to cells, while demonstrating their capacity to promote cell adhesion and proliferation. Overall, we showed that the proposed scaffolds present a tailored kinetics on the release of inorganic species and controlled biological response under conditions that mimic the bone physiological environment. - Highlights: • We prepared borosilicate glasses and their PLLA composites in the form of fibres. • These glasses imparted bioactivity and controlled degradability to the fibres. • The prepared fibres did not elicit cytotoxicity. • hASCs attached and proliferated in the surface and inner sections of the scaffolds. • The composites present appropriate properties to be used in bone tissue engineering.

  14. Aqueous corrosion of borosilicate glasses: experiments, modeling and Monte-Carlo simulations

    International Nuclear Information System (INIS)

    Ledieu, A.

    2004-10-01

    This work is concerned with the corrosion of borosilicate glasses with variable oxide contents. The originality of this study is the complementary use of experiments and numerical simulations. This study is expected to contribute to a better understanding of the corrosion of nuclear waste confinement glasses. First, the corrosion of glasses containing only silicon, boron and sodium oxides has been studied. The kinetics of leaching show that the rate of leaching and the final degree of corrosion sharply depend on the boron content through a percolation mechanism. For some glass contents and some conditions of leaching, the layer which appears at the glass surface stops the release of soluble species (boron and sodium). This altered layer (also called the gel layer) has been characterized with nuclear magnetic resonance (NMR) and small angle X-ray scattering (SAXS) techniques. Second, additional elements have been included in the glass composition. It appears that calcium, zirconium or aluminum oxides strongly modify the final degree of corrosion so that the percolation properties of the boron sub-network is no more a sufficient explanation to account for the behavior of these glasses. Meanwhile, we have developed a theoretical model, based on the dissolution and the reprecipitation of the silicon. Kinetic Monte Carlo simulations have been used in order to test several concepts such as the boron percolation, the local reactivity of weakly soluble elements and the restructuring of the gel layer. This model has been fully validated by comparison with the results on the three oxide glasses. Then, it has been used as a comprehensive tool to investigate the paradoxical behavior of the aluminum and zirconium glasses: although these elements slow down the corrosion kinetics, they lead to a deeper final degree of corrosion. The main contribution of this work is that the final degree of corrosion of borosilicate glasses results from the competition of two opposite mechanisms

  15. The Dissolution Behavior of Borosilicate Glasses in Far-From Equilibrium Conditions

    Energy Technology Data Exchange (ETDEWEB)

    Neeway, James J.; Rieke, Peter C.; Parruzot, Benjamin PG; Ryan, Joseph V.; Asmussen, Robert M.

    2018-02-10

    In far-from-equilibrium conditions, the dissolution of borosilicate glasses used to immobilize nuclear waste is known to be a function of both temperature and pH. The aim of this paper is to study effects of these variables on three model waste glasses (SON68, ISG, AFCI). To do this, experiments were conducted at temperatures of 23, 40, 70, and 90 °C and pH(RT) values of 9, 10, 11, and 12 with the single-pass flow-through (SPFT) test method. The results from these tests were then used to parameterize a kinetic rate model based on transition state theory. Both the absolute dissolution rates and the rate model parameters are compared with previous results. Discrepancies in the absolute dissolution rates as compared to those obtained using other test methods are discussed. Rate model parameters for the three glasses studied here are nearly equivalent within error and in relative agreement with previous studies. The results were analyzed with a linear multivariate regression (LMR) and a nonlinear multivariate regression performed with the use of the Glass Corrosion Modeling Tool (GCMT), which is capable of providing a robust uncertainty analysis. This robust analysis highlights the high degree of correlation of various parameters in the kinetic rate model. As more data are obtained on borosilicate glasses with varying compositions, the effect of glass composition on the rate parameter values could possibly be obtained. This would allow for the possibility of predicting the forward dissolution rate of glass based solely on composition

  16. Water leaching of borosilicate glasses: experiments, modeling and Monte Carlo simulations

    International Nuclear Information System (INIS)

    Ledieu, A.

    2004-10-01

    This work is concerned with the corrosion of borosilicate glasses with variable oxide contents. The originality of this study is the complementary use of experiments and numerical simulations. This study is expected to contribute to a better understanding of the corrosion of nuclear waste confinement glasses. First, the corrosion of glasses containing only silicon, boron and sodium oxides has been studied. The kinetics of leaching show that the rate of leaching and the final degree of corrosion sharply depend on the boron content through a percolation mechanism. For some glass contents and some conditions of leaching, the layer which appears at the glass surface stops the release of soluble species (boron and sodium). This altered layer (also called the gel layer) has been characterized with nuclear magnetic resonance (NMR) and small angle X-ray scattering (SAXS) techniques. Second, additional elements have been included in the glass composition. It appears that calcium, zirconium or aluminum oxides strongly modify the final degree of corrosion so that the percolation properties of the boron sub-network is no more a sufficient explanation to account for the behavior of these glasses. Meanwhile, we have developed a theoretical model, based on the dissolution and the reprecipitation of the silicon. Kinetic Monte Carlo simulations have been used in order to test several concepts such as the boron percolation, the local reactivity of weakly soluble elements and the restructuring of the gel layer. This model has been fully validated by comparison with the results on the three oxide glasses. Then, it has been used as a comprehensive tool to investigate the paradoxical behavior of the aluminum and zirconium glasses: although these elements slow down the corrosion kinetics, they lead to a deeper final degree of corrosion. The main contribution of this work is that the final degree of corrosion of borosilicate glasses results from the competition of two opposite mechanisms

  17. Wetspun poly-L-(lactic acid)-borosilicate bioactive glass scaffolds for guided bone regeneration

    International Nuclear Information System (INIS)

    Fernandes, João S.; Reis, Rui L.; Pires, Ricardo A.

    2017-01-01

    We developed a porous poly-L-lactic acid (PLLA) scaffold compounded with borosilicate bioactive glasses (BBGs) endowing it with bioactive properties. Porous PLLA-BBG fibre mesh scaffolds were successfully prepared by the combination of wet spinning and fibre bonding techniques. Micro-computed tomography (μCT) confirmed that the PLLA-BBG scaffolds containing ≈ 25% of BBGs (w/w) exhibited randomly interconnected porous (58 to 62% of interconnectivity and 53 to 67% of porosity) with mean pore diameters higher that 100 μm. Bioactivity and degradation studies were performed by immersing the scaffolds in simulated body fluid (SBF) and ultrapure water, respectively. The PLLA-BBG scaffolds presented a faster degradation rate with a constant release of inorganic species, which are capable to produce calcium phosphate structures at the surface of the material after 7 days of immersion in SBF (Ca/P ratio of ~ 1.7). Cellular in vitro studies with human osteosarcoma cell line (Saos-2) and human adipose-derived stem cells (hASCs) showed that PLLA-BBGs are not cytotoxic to cells, while demonstrating their capacity to promote cell adhesion and proliferation. Overall, we showed that the proposed scaffolds present a tailored kinetics on the release of inorganic species and controlled biological response under conditions that mimic the bone physiological environment. - Highlights: • We prepared borosilicate glasses and their PLLA composites in the form of fibres. • These glasses imparted bioactivity and controlled degradability to the fibres. • The prepared fibres did not elicit cytotoxicity. • hASCs attached and proliferated in the surface and inner sections of the scaffolds. • The composites present appropriate properties to be used in bone tissue engineering.

  18. Intrinsic dosimetry. Properties and mechanisms of thermoluminescence in commercial borosilicate glass

    Energy Technology Data Exchange (ETDEWEB)

    Clark, Richard A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2012-10-01

    Intrinsic dosimetry is the method of measuring total absorbed dose received by the walls of a container holding radioactive material. By considering the total absorbed dose received by a container in tandem with the physical characteristics of the radioactive material housed within that container, this method has the potential to provide enhanced pathway information regarding the history of the container and its radioactive contents. The latest in a series of experiments designed to validate and demonstrate this newly developed tool are reported. Thermoluminescence (TL) dosimetry was used to measure dose effects on raw stock borosilicate container glass up to 70 days after gamma ray, x-ray, beta particle or ultraviolet irradiations at doses from 0.15 to 20 Gy. The TL glow curve when irradiated with 60Co was separated into five peaks: two relatively unstable peaks centered near 120 and 165°C, and three relatively stable peaks centered near 225, 285, and 360°C. Depending on the borosilicate glass source, the minimum measurable dose using this technique is 0.15-0.5 Gy, which is roughly equivalent to a 24 hr irradiation at 1 cm from a 50-165 ng source of 60Co. Differences in TL glow curve shape and intensity were observed for the glasses from different geographical origins. These differences can be explained by changes in the intensities of the five peaks. Electron paramagnetic resonance (EPR) and multivariate statistical methods were used to relate the TL intensity and peaks to electron/hole traps and compositional variations.

  19. Monte Carlo simulations for thermodynamical properties calculations of plasmas at thermodynamical equilibrium. Applications to opacity and equation of state calculations; Apport d'un code de simulation Monte Carlo pour l'etude des proprietes thermodynamiques d'un plasma a l'equilibre et application au calcul de l'elargissement des profils de raies ioniques emises dans les plasmas denses, aux opacites spectrales et aux equations d'etat de systemes fluides

    Energy Technology Data Exchange (ETDEWEB)

    Gilles, D

    2005-07-01

    This report is devoted to illustrate the power of a Monte Carlo (MC) simulation code to study the thermodynamical properties of a plasma, composed of classical point particles at thermodynamical equilibrium. Such simulations can help us to manage successfully the challenge of taking into account 'exactly' all classical correlations between particles due to density effects, unlike analytical or semi-analytical approaches, often restricted to low dense plasmas. MC simulations results allow to cover, for laser or astrophysical applications, a wide range of thermodynamical conditions from more dense (and correlated) to less dense ones (where potentials are long ranged type). Therefore Yukawa potentials, with a Thomas-Fermi temperature- and density-dependent screening length, are used to describe the effective ion-ion potentials. In this report we present two MC codes ('PDE' and 'PUCE') and applications performed with these codes in different fields (spectroscopy, opacity, equation of state). Some examples of them are discussed and illustrated at the end of the report. (author)

  20. Safeguards Implementation Guide for States with Small Quantities Protocols (French Edition); Guide d'application des garanties pour les Etats ayant des protocoles relatifs aux petites quantites de matieres

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-10-15

    The International Atomic Energy Agency (IAEA) works to enhance the contribution of nuclear energy for peace and prosperity around the world, while helping to ensure that nuclear material is not diverted to nuclear weapons or other nuclear explosive devices. In implementing safeguards, the IAEA plays an instrumental independent verification role, providing credible assurances that States' safeguards commitments are being respected. Most of the world's non-nuclear-weapon States (NNWSs) have concluded comprehensive safeguards agreements (CSAs) with the IAEA, pursuant to the Treaty on the Non- Proliferation of Nuclear Weapons (NPT). The IAEA and States are required to cooperate in the implementation of such agreements. Effective cooperation demonstrates a State's commitment to the peaceful use of nuclear energy and furthers the State's national interests by reducing the risk of unauthorized use of nuclear material. Over 100 NNWSs party to the NPT have very limited quantities of nuclear material and have concluded protocols to their CSAs which hold in abeyance many procedures in Part II of a CSA. These protocols are referred to as 'small quantities protocols' or 'SQPs' and remain in effect as long as the State meets certain eligibility criteria. The purpose of an SQP is to reduce the burden of safeguards implementation for States with little or no nuclear activities, while retaining the integrity of the safeguards system. States with SQPs have very important obligations they must fulfil under their CSAs. In 1997, as part of the IAEA's efforts to strengthen its safeguards system, the Model Additional Protocol to the Agreement(s) between State(s) and the International Atomic Energy Agency for the Application of Safeguards was developed to provide the IAEA with broader access to information and locations, thus significantly increasing the IAEA's ability to provide assurance of the absence of undeclared nuclear material and activities in States. Many States with SQPs have

  1. Appui aux transitions dans le monde arabe | IDRC - International ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    étudieront l'évolution du rôle de l'État face aux enjeux économiques et sociaux; - appuieront les ... ARI Centre pour une initiative arabe de réforme. Institution Country. France ... New funding opportunity for gender equality and climate change.

  2. Adaptation aux changements climatiques dans le bassin versant de ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    ... hydrologiques et agronomiques, les chercheurs étudieront l'évolution de la ... de coopération scientifique et technologique en appui aux projets de recherche ... de l'Institut d'étude du développement international de l'Université McGill.

  3. Recherche sur l'adaptation aux changements climatiques

    International Development Research Centre (IDRC) Digital Library (Canada)

    Corey Piccioni

    consortiums travaillent dans des zones vulnérables aux changements climatiques en Afrique et en Asie, notamment dans les bassins hydrographiques alimentés .... Le projet de recherche Pathways to Resilience in Semi-Arid Economies (PRISE) vise à réduire les risques et à opti- miser les possibilités de développement ...

  4. Inobservance therapeutique aux anti-retroviraux chez les personnes ...

    African Journals Online (AJOL)

    Buts : Rechercher les facteurs psychologiques ou psychosociaux responsables de l'inobservance thérapeutique (IBT) aux antiretroviraux (ARV) Méthodologie : Il s'agit d'une étude transversale sur 06 mois (mai - octobre 2008) menée au centre de promotion sociale à Lomé chez les personnes vivant avec le VIH (PVVIH) ...

  5. AUX: a scripting language for auditory signal processing and software packages for psychoacoustic experiments and education.

    Science.gov (United States)

    Kwon, Bomjun J

    2012-06-01

    This article introduces AUX (AUditory syntaX), a scripting syntax specifically designed to describe auditory signals and processing, to the members of the behavioral research community. The syntax is based on descriptive function names and intuitive operators suitable for researchers and students without substantial training in programming, who wish to generate and examine sound signals using a written script. In this article, the essence of AUX is discussed and practical examples of AUX scripts specifying various signals are illustrated. Additionally, two accompanying Windows-based programs and development libraries are described. AUX Viewer is a program that generates, visualizes, and plays sounds specified in AUX. AUX Viewer can also be used for class demonstrations or presentations. Another program, Psycon, allows a wide range of sound signals to be used as stimuli in common psychophysical testing paradigms, such as the adaptive procedure, the method of constant stimuli, and the method of adjustment. AUX Library is also provided, so that researchers can develop their own programs utilizing AUX. The philosophical basis of AUX is to separate signal generation from the user interface needed for experiments. AUX scripts are portable and reusable; they can be shared by other researchers, regardless of differences in actual AUX-based programs, and reused for future experiments. In short, the use of AUX can be potentially beneficial to all members of the research community-both those with programming backgrounds and those without.

  6. From chemical mapping to pressure temperature deformation micro-cartography: mineralogical evolution and mass transport in thermo-mechanic disequilibrium systems: application to meta-pelites and confinement nuclear waste materials; De l'imagerie chimique a la micro-cartographie Pression-Temperature-Deformation: evolution mineralogique et transport de matiere dans des systemes en desequilibre thermomecanique. Applications aux metapelites et aux materiaux de stockage de dechets radioactifs

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, V. de

    2006-03-15

    The mineralogical composition of metamorphic rocks or industrial materials evolves when they are submitted to thermomechanical disequilibria, i.e. a spatial or temporal pressure and temperature evolution, or chemical disequilibria as variations in redox conditions, pH... For example, during low temperature metamorphic processes, rocks re-equilibrate only partially, and thus record locally thermodynamic equilibria increasing so the spatial chemical heterogeneities. Understanding the P-T evolution of such systems and deciphering modalities of their mineralogical transformation imply to recognize and characterize the size of these local 'paleo-equilibria', and so to have a spatial chemical information at least in 2 dimensions. In order to get this information, microprobe X-ray fluorescence maps have been used. Computer codes have been developed with Matlab to quantify these maps in view of thermo-barometric estimations. In this way, P-T maps of mineral crystallisation were produced using the multi-equilibria thermodynamic technique. Applications on two meta-pelites from the Sambagawa blue-schist belt (Japan) and from the Caledonian eclogitic zone in Spitsbergen, show that quantitative chemical maps are a powerful tool to retrieve the metamorphic history of rocks. From these chemical maps have been derived maps of P-T-time-redox-deformation that allow to characterize P-T conditions of minerals formation, and so, the P-T path of the sample, the oxidation state of iron in the chlorite phase. As a result, we underline the relation between deformation and crystallisation, and propose a relative chronology of minerals crystallisation and deformations. The Fe{sup 3+} content map in chlorite calculated by thermodynamic has also been validated by a {mu}-XANES mapping at the iron K-edge measured at the ESRF (ID24) using an innovative method. Another application relates to an experimental study of clay materials, main components of an analogical model of a nuclear

  7. Fundamental study of ionization and dissociation processes caused by electron impact in aromatic molecules; application of the quasi-equilibrium theory to phenanthrene and to methylphenanthrenes; Etudes fondamentales des processus d'ionisation et de dissociation des molecules aromatiques par impact electronique et application de la theorie du quasi-equilibre au phenanthrene et aux methyl-phenanthrenes

    Energy Technology Data Exchange (ETDEWEB)

    Nounou, P [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1969-07-01

    The quasi-equilibrium theory has been applied only to the family of long chain aliphatic hydrocarbons. We have tried to extend it to phenanthrene and methyl-phenanthrenes molecules, i.e. to aromatic molecules possessing a great number of degrees of freedom. In a first part, we have attempted to give a method of interpretation of the ionization and dissociation processes of the phenanthrenic molecules. These preliminary experimental studies of the behaviour under electron impact of the compounds provide us a great wealth of information about important structural transformations of the molecular and fragment ions, and also about auto-ionization and excitation processes of the studied molecules. The experimental study of the metastable peaks has then confirmed the validity of the preceding dissociation processes, while it gave with more accuracy some thermodynamical values in connection with decomposition reactions. The three studies of the ionization, then dissociation processes and of the metastable peaks, represent the three phases of a general method of interpretation of the fragmentation in mass spectrometry. In order to give this method a theoretical basis, we have carried out the molecular diagrams of each of the studied, compounds, showing by this way the aid of Quantum Mechanics to the study of excited and ionic states. In a second part, we have carried out the mass spectra of the phenanthrene and methyl-phenanthrenes molecules by means of the rate constants expression given by ROSENSTOCK. We have proposed new methods of calculation of the frequency factors, for the aliphatic molecules as well as the aromatic ones. If the rather good agreement observed between the experimental and calculated results cannot be surely attributed to the validity of the theory, however it out-lines the interest presented by the application of this theory to large aromatic molecules. Furthermore, the results at which we arrived provide us with interesting information about the

  8. Preparation and characterization of an improved borosilicate glass for the solidification of high level radioactive fission product solutions (HLW). Pt. 2

    International Nuclear Information System (INIS)

    Kahl, L.; Ruiz-Lopez, M.C.; Saidl, J.; Dippel, T.

    1982-04-01

    In the 'Institut fuer Nuklare Entsorgungstechnik' the borosilicate glass VG 98/12 has been developed for the solidification of the high level radioactive waste (HLW). This borosilicate glass can be used in a direct heated ceramic melter and forms together with the HLW the borosilicate glass product GP 98/12. This borosilicate glass product has been examined in detail both in liquid and solid state. The elements contained in the HLW can be incorporated without problems. Only in a few exceptions the concentration must be kept below certain limits to exclude the formation of a second phase ('yellow phase') by separation. No spontaneous crystallization and no crystallization over a long time could be observed as long as the temperature of the borosilicate glass product is kept below its transformation area. Simulating accidental conditions in the final storage, samples had been leached at temperatures up to 200 0 C and pressures up to 130 bar with saturated rock salt brine and saturated quinary salt brine. The leaching process seems to be stopped by the formed 'leached layer' on the surface of the borosilicate glass product after a limited leaching time. Detailed investigations have been started to explain this phenomenon. (orig.) [de

  9. Safety Training: Sensibilisation aux gestes et postures de travail

    CERN Multimedia

    Laetitia Laddada

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. Nous vous proposons un nouveau cours de sécurité lié aux manutentions manuelles (durée 1 jour) : Sensibilisation aux gestes et postures de travail. Si vous êtes amené à manipuler régulièrement des charges lourdes ou volumineuses, cette formation peut vous aider à prévenir les lésions musculaires ou dorsales. A l'issue de cette formation, vous serez capable d'adopter et d'appliquer les principes de base de sécurité physique et d'économie d'efforts dans les manipulations...

  10. Modélisation du procédé de soudage hybride Arc / Laser par une approche level set application aux toles d'aciers de fortes épaisseurs A level-set approach for the modelling of hybrid arc/laser welding process application for high thickness steel sheets joining

    Directory of Open Access Journals (Sweden)

    Desmaison Olivier

    2013-11-01

    Full Text Available Le procédé de soudage hybride Arc/Laser est une solution aux assemblages difficiles de tôles de fortes épaisseurs. Ce procédé innovant associe deux sources de chaleur : un arc électrique produit par une torche MIG et une source laser placée en amont. Ce couplage améliore le rendement du procédé, la qualité du cordon et les déformations finales. La modélisation de ce procédé par une approche Level Set permet une prédiction du développement du cordon et du champ de température associé. La simulation du soudage multi-passes d'une nuance d'acier 18MnNiMo5 est présentée ici et les résultats sont comparés aux observations expérimentales. The hybrid arc/laser welding process has been developed in order to overcome the difficulties encountered for joining high thickness steel sheets. This innovative process gathers two heat sources: an arc source developed by a MIG torch and a pre-located laser source. This coupling improves the efficiency of the process, the weld bead quality and the final deformations. The Level-Set approach for the modelling of this process enables the prediction of the weld bead development and the temperature field evolution. The simulation of the multi-passes welding of a 18MnNiMo5 steel grade is detailed and the results are compared to the experimental observations.

  11. Studies on the accelerated chemical durability test and its impact on structural changes in borosilicate glass matrix

    International Nuclear Information System (INIS)

    Thorat, Vidya S.; Kadam, P.S.; Mishra, R.K.; Kumar, Amar; Kaushik, C.P.; Sudarsan, V.; Tyagi, A.K.

    2015-01-01

    Sodium borosilicate glass used for the immobilisation of high level nuclear waste with tentative compositions (SiO 2 ) 0.477 (B 2 O 3 ) 0.239 (Na 2 O) 0.170 (TiO 2 ) 0.02 )3 (CaO) 0.068 (Al 2 O 3 ) 0.023 was evaluated for its long term stability in the repository conditions where it may be exposed to high temperature and pressure. 29 Si MAS NMR studies have confirmed that, upon leaching, sodium borosilicate glass undergoes congruent crystallization leading to the formation of an aluminosilicate phase, Na 6 Al 6 Si 10 O 32 . Further the residual glass structure in the composite sample is identical with that of the un-leached glass. Boron structural units are unaffected in the glass compositions upon leaching

  12. High-level waste glass compendium; what it tells us concerning the durability of borosilicate waste glass

    International Nuclear Information System (INIS)

    Cunnane, J.C.; Allison, J.

    1993-01-01

    Facilities for vitrification of high-level nuclear waste in the United States are scheduled for startup in the next few years. It is, therefore, appropriate to examine the current scientific basis for understanding the corrosion of high-level waste borosilicate glass for the range of service conditions to which the glass products from these facilities may be exposed. To this end, a document has been prepared which compiles worldwide information on borosilicate waste glass corrosion. Based on the content of this document, the acceptability of canistered waste glass for geological disposal is addressed. Waste glass corrosion in a geologic repository may be due to groundwater and/or water vapor contact. The important processes that determine the glass corrosion kinetics under these conditions are discussed based on experimental evidence from laboratory testing. Testing data together with understanding of the long-term corrosion kinetics are used to estimate radionuclide release rates. These rates are discussed in terms of regulatory performance standards

  13. Interaction fluide-structure souple et legere, application aux voiliers

    OpenAIRE

    Durand , Mathieu

    2012-01-01

    This thesis, devoted to simulations of sailboat sail, was initiated by K-Epsilon, acompany specialized in numerical computations for naval hydrodynamics, IRENav, the Frenchnaval academy laboratory and LHEEA from Ecole Centrale Nantes. In this context a finiteelement program was developed dedicated to computing sail membranes and sailboat structures.The program was coupled with an inviscid fluid solver. A more detailed modeling of the flow andinteraction was realized by implementing a coupling...

  14. Methodes de provision technique et applications aux donnees ...

    African Journals Online (AJOL)

    assurance. Un bref résumé des différentes méthodes a été donné ainsi que les hypothèses des modèles. Une étude plus approfondie montre des limites de ces méthodes dans l'approche actuelle dans le choix d'un Tail Factor. En effet, les valeurs ...

  15. Conditions de contrat applicables aux travaux de construction

    CERN Document Server

    1999-01-01

    Conditions of Contract for Construction, which are recommended for building or engineering works designed by the Employer or by his representative, the Engineer. Under the usual arrangements for this type of contract, the Contractor constructs the works in accordance with a design provided by the Employer. However, the works may include some elements of Contractor-designed civil, mechanical, electrical and/or construction works.

  16. 4.2. The kinetics of nitric acid decomposition of calcined borosilicate raw material of Ak-Arkhar Deposit

    International Nuclear Information System (INIS)

    Mirsaidov, U.M.; Kurbonov, A.S.; Mamatov, E.D.

    2015-01-01

    Present article is devoted to kinetics of nitric acid decomposition of calcined borosilicate raw material of Ak-Arkhar Deposit. The dependence of nitric acid decomposition of calcined boric raw material for extraction of boron oxide on temperature (20-100 deg C) and process duration (15-60 minutes) was defined. It was defined that at temperature increasing the extraction rate of boron oxide increases from 20.8 to 78.6%.

  17. Barium borosilicate glass - a potential matrix for immobilization of sulfate bearing high-level radioactive liquid waste

    International Nuclear Information System (INIS)

    Kaushik, C.P.; Mishra, R.K.; Sengupta, P.; Kumar, Amar; Das, D.; Kale, G.B.; Raj, Kanwar

    2006-01-01

    Borosilicate glass formulations adopted worldwide for immobilization of high-level radioactive liquid waste (HLW) is not suitable for sulphate bearing HLW, because of its low solubility in such glass. A suitable glass matrix based on barium borosilicate has been developed for immobilization of sulphate bearing HLW. Various compositions based on different glass formulations were made to examine compatibility with waste oxide with around 10 wt% sulfate content. The vitrified waste product obtained from barium borosilicate glass matrix was extensively evaluated for its characteristic properties like homogeneity, chemical durability, glass transition temperature, thermal conductivity, impact strength, etc. using appropriate techniques. Process parameters like melt viscosity and pour temperature were also determined. It is found that SB-44 glass composition (SiO 2 : 30.5 wt%, B 2 O 3 : 20.0 wt%, Na 2 O: 9.5 wt% and BaO: 19.0 wt%) can be safely loaded with 21 wt% waste oxide without any phase separation. The other product qualities of SB-44 waste glass are also found to be on a par with internationally adopted waste glass matrices. This formulation has been successfully implemented in plant scale

  18. The dissolution behavior of borosilicate glasses in far-from equilibrium conditions

    Science.gov (United States)

    Neeway, James J.; Rieke, Peter C.; Parruzot, Benjamin P.; Ryan, Joseph V.; Asmussen, R. Matthew

    2018-04-01

    An area of agreement in the waste glass corrosion community is that, at far-from-equilibrium conditions, the dissolution of borosilicate glasses used to immobilize nuclear waste is known to be a function of both temperature and pH. The aim of this work is to study the effects of temperature and pH on the dissolution rate of three model nuclear waste glasses (SON68, ISG, AFCI). The dissolution rate data are then used to parameterize a kinetic rate model based on Transition State Theory that has been developed to model glass corrosion behavior in dilute conditions. To do this, experiments were conducted at temperatures of 23, 40, 70, and 90 °C and pH (22 °C) values of 9, 10, 11, and 12 with the single-pass flow-through (SPFT) test method. Both the absolute dissolution rates and the rate model parameters are compared with previous results. Rate model parameters for the three glasses studied here are nearly equivalent within error and in relative agreement with previous studies though quantifiable differences exist. The glass dissolution rates were analyzed with a linear multivariate regression (LMR) and a nonlinear multivariate regression performed with the use of the Glass Corrosion Modeling Tool (GCMT), with which a robust uncertainty analysis is performed. This robust analysis highlights the high degree of correlation of various parameters in the kinetic rate model. As more data are obtained on borosilicate glasses with varying compositions, a mathematical description of the effect of glass composition on the rate parameter values should be possible. This would allow for the possibility of calculating the forward dissolution rate of glass based solely on composition. In addition, the method of determination of parameter uncertainty and correlation provides a framework for other rate models that describe the dissolution rates of other amorphous and crystalline materials in a wide range of chemical conditions. The higher level of uncertainty analysis would provide

  19. Structure and chemical durability of barium borosilicate glass–ceramics containing zirconolite and titanite crystalline phases

    International Nuclear Information System (INIS)

    Li, Huidong; Wu, Lang; Xu, Dong; Wang, Xin; Teng, Yuancheng; Li, Yuxiang

    2015-01-01

    In order to increase the solubility of actinides in the glass matrix, the effects of CaO, TiO 2 , and ZrSiO 4 addition (abbreviated as CTZ, in the mole ratio of 2:2:1) on crystalline phases, microstructure, and chemical durability of barium borosilicate glass–ceramics were investigated. The results show that the samples possess both zirconolite-2M and titanite phase when the CTZ content is greater than or equal to 45 wt.%. For the glass–ceramics with 45 wt.% CTZ (CTZ-45), only zirconolite-2M phase is observed after annealing at 680–740 °C for 2 h. The CTZ-45 possess zirconolite-2M and titanite phases after annealing at 700 °C first, and then annealing at 900–1050 °C for 2 h. Furthermore, the zirconolite-2M and titanite grains show a strip and brick shape, respectively. The CTZ-45 annealing at 950 °C shows the lower normalized leaching rates of B, Na and Nd when compared to that of CTZ-0 and CTZ-55. - Highlights: • CaO, TiO 2 , ZrSiO 4 (CTZ) as nucleating agents were added to barium borosilicate glass. • The samples with 45–55 wt% CTZ possess CaZrTi 2 O 7 -2M and CaTiSiO 5 crystalline phases. • CTZ-45 (45wt% CTZ) possesses only CaZrTi 2 O 7 -2M phase after annealing at 680–740 °C. • CTZ-45 possesses CaZrTi 2 O 7 -2M and CaTiSiO 5 phases after annealing at 900–1050 °C. • CTZ-45 annealing at 950 °C shows the lower leaching rates of B, Na and Nd than CTZ-0 and CTZ-55.

  20. A container closure system that allows for greater recovery of radiolabeled peptide compared to the standard borosilicate glass system

    International Nuclear Information System (INIS)

    Leece, Alicia K.; Heidari, Pedram; Yokell, Daniel L.; Mahmood, Umar

    2013-01-01

    Objectives: Often peptides used in synthesis of radiopharmaceutical PET tracers are lipophilic and adhere to the walls of container closure systems (CCS) such that costly peptide and product are not fully recoverable after synthesis occurs. This investigation compares a standard United States Pharmacopeia (USP) Type I borosilicate glass CCS to a cyclic polyolefin copolymer Crystal Zenith ® (CZ) CCS, for 68 Ga-chloride and 68 Ga-DOTATOC ([ 68 Ga] Ga-DOTA-D-Phe1-Tyr3-octreotide) retention in the reaction vial after labeling. Methods: 68 Gallium labeling of DOTATOC was conducted by adding 68 Ga-chloride, 2 M HEPES (4-(2-hydroxyethyl)piperazine-1-ethanesulfonic acid) or 0.75 M sodium acetate, and 1–30 µg of DOTATOC into the CZ or glass CCS. The reaction mixture was heated for 15 min and cooled to room temperature. The crude reaction mixture was then withdrawn via syringe, for final processing. The CCS was then assayed using a dose calibrator to determine the amount of retained 68 Ga-DOTATOC. Statistical significance was assessed using an unpaired Student's t-test. Results: In all experiments (n=72) with various amounts of peptide and different buffering systems, the CZ CCS retained less activity than the glass CCS. Using 2 M HEPES and 15 µg or 30 µg of DOTATOC, the CZ CCS retained approximately 10% less of the labeled DOTATOC compared to the glass CCS (p 68 Ga-chloride. Conclusion: For applications involving the labeling of peptides such as 68 Ga-DOTATOC, the CZ CCS compared to the glass CCS, results in an improved recovery of product. - Highlights: • We examined the adhesion of 68 Ga-DOTATOC to glass and CZ CCS. • The adhesion of the 68 Ga-DOTATOC was 10% less in CZ CCS compared to glass CCS. • Overall recovery of 68 Ga-DOTATOC reaction solution is higher in CZ CCS than glass CCS. • Adhesion to the CCS is due to 68 Ga-DOTATOC, not 68 Ga-chloride

  1. Sensibilisation aux gestes et postures de travail - French version only

    CERN Multimedia

    2004-01-01

    Nous vous proposons un nouveau cours de sécurité lié aux manutentions manuelles (durée 1 jour) : Sensibilisation aux gestes et postures de travail. Si vous êtes amené à manipuler régulièrement des charges lourdes ou volumineuses, cette formation peut vous aider à prévenir les lésions musculaires ou dorsales. A l'issue de cette formation, vous serez capable d'adopter et d'appliquer les principes de base de sécurité physique et d'économie d'efforts dans les manipulations d'objets. Les cours sont pris en charge par la Commission de Sécurité. L'inscription EDH est obligatoire. Pour plus d'information, veuillez consulter les pages Formation & Développement (Groupe Sécurité)

  2. La recherche-action participative facilite l'adaptation aux ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Ces travaux comprenaient un riche portefeuille de recherches sur l'adaptation aux changements climatiques dans le secteur de l'agriculture. La méthodologie privilégiée dans le cadre du programme, la recherche-action participative, s'est avérée fructueuse et a permis de mettre au point et de déployer des solutions ...

  3. Accroissement du recours aux politiques fiscales dans la lutte ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Incidence de la hausse des taxes sur le tabac et du prix des produits du tabac en Ukraine, en Russie et au Bélarus. La recherche destinée aux responsables des politiques de l'Ukraine, de la Russie et du Bélarus mettra en évidence la façon dont les mesures de taxation des produits du tabac peuvent contribuer.

  4. Foire aux questions: Bourse de recherche 2018 du CRDI | CRDI ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Vous remarquerez que d'importantes modifications ont été apportées aux critères d'admissibilité dans les deux dernières années. 2) Je suis étudiant à la maîtrise. Suis-je admissible à une bourse de recherche ? En principe oui. Toutefois, il est important de lire les spécifications du programme qui vous intéresse, car les ...

  5. Aspects Phenotypiques De La Resistance Aux Β- Lactamines Des ...

    African Journals Online (AJOL)

    Conclusion: L'identification des phénotypes de résistance de P.aeruginosa par la technique d'antibiogramme en milieu gélosé constitue une alternative pour les laboratoires de bactériologie médicale dans les pays aux ressources limitées comme le Togo, où les techniques de biologie moléculaire ne sont pas disponibles ...

  6. Adaptation aux changements climatiques des bassins versants en ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Les résultats de recherche seront diffusés dans des publications scientifiques à comité de lecture, dans le cadre d'une interaction critique avec la sphère des politiques, ainsi qu'à l'occasion d'un institut d'été destiné aux chercheurs et ... The Trustees of Ashoka Trust for Research in Ecology and the Environment (ATREE).

  7. CRDI foire aux questions | CRDI - Centre de recherches pour le ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    1. Quels sont les éléments importants à mentionner dans ma demande d'emploi ? Il importe de démontrer, au moyen d'exemples concrets, de quelle façon vos qualifications correspondent aux exigences du poste en ce qui concerne les études, l'expérience et la langue. 2. Comment saurai-je si ma demande d'emploi a bel ...

  8. Aquaculture intérieure et adaptation aux changements climatiques ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Ce projet porte sur l'élevage du tilapia dans de petits étangs fermiers ou des cages flottantes dans les rivières et les réservoirs du nord de la Thaïlande. Les chercheurs exploreront des façons d'adapter les pratiques aquacoles aux changements climatiques et analyseront la valeur de l'aquaculture comme stratégie ...

  9. Adapter l'information climatique aux besoins des utilisateurs | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    29 mars 2011 ... Cet exposé politique résume les leçons tirées du forum d'apprentissage du programme ACCA entitulé " Faciliter l'accès aux prévisions météorologiques saisonnières et savoir mieux les exploiter" qui a pris lieux à Nairobi, Kenya en mars 1010.

  10. There Is Still Room for Improvement: Presentation of a Neutral Borosilicate Glass with Improved Chemical Stability for Parenteral Packaging.

    Science.gov (United States)

    Boltres, Bettine; Tratzky, Stephan; Kass, Christof; Eichholz, Rainer; Naß, Peter

    2016-01-01

    For pharmaceutical parenteral packaging the glass compositions have always been either Type I borosilicate or Type III soda-lime glass. As both the compositions and certain chemical and physical properties are mandated by international standards, there has not been room for any changes. However, by applying only minor adjustments, a borosilicate glass was developed that showed improved chemical stability. The chemical composition is still in the range of currently used borosilicate glasses, which makes it a Type I glass according to all current pharmacopeia. A study was performed on glass vials comparing the new glass with the standard FIOLAX(®) and two other publicly available glasses. In an extraction study with water at 121 °C the new glass showed the highest chemical stability with the lowest amount of extractables. In an accelerated ageing study, which was done with water, phosphate, and carbonate buffer at 40 °C for 12 months, the new glass also proved to have the lowest amount of leachables. In this article the new glass and the results from the studies are presented, showing the reader how much of an effect can be attained with only minor adjustments if the scientific fundamentals are clear. The pharmaceutical market has been quite constant and risk-oriented due to the high impact on the safety of the patient. As any change necessitates a complicated change process, this has, in consequence, lead the industry to resist changing the parenteral primary packaging material for decades. The main glasses have either been Type I borosilicate or Type III soda-lime glass. On the other hand, a combination of improved inspection systems and the development of more sensitive biologically based drugs has elevated the standards for parental packaging materials. For example, the measurement of extractables and leachables from the packaging material steadily came into focus. In this article, a new glass is presented that still belongs to the group of Type I borosilicate

  11. Effects of solution chemistry and atmosphere on leaching of alkali borosilicate glass

    International Nuclear Information System (INIS)

    Hermansson, H.P.; Christensen, H.; Clark, D.E.; Werme, L.

    1983-01-01

    The leaching behavior of two alkali-borosilicate glasses containing 9 wt % simulated fission products and 1.6 wt % uranium oxide has been studied. Samples were exposed to one of eight types of leachants including doubly distilled water, simulated ground silicate water, a brine solution, and solutions containing various concentrations of iron, aluminum or sodium maintained at either 25 0 C, 40 0 C or 90 0 C for up to 182 days. The most aggressive leachants were the solutions containing sodium (excluding brine) and simulated ground silicate water. These solutions increased the extent of leaching by a factor of 2 to 3 over that for distilled water for one of the glasses. A partially protective surface film rich in magnesium, potassium, and chlorine was formed on the glasses exposed to the brine solution. In order to evaluate the effects of atmosphere on leaching, samples were also immersed in doubly distilled water over which the relative concentrations of oxygen, nitrogen and carbon dioxide were varied. Increasing the carbon dioxide concentration from 0 to 50% resulted in a factor of 3 increase in the leaching rate

  12. Leach behavior of high-level borosilicate glasses under deep geological environment

    International Nuclear Information System (INIS)

    Kim, Seung Soo; Chun, Kwan Sik; Park, Hyun Soo

    1998-02-01

    This report presents an overview of the activities in high-level radioactive waste glass which is considered as the most practicable form of waste, and also is intended to be used in the disposal of national high-level radioactive waste in future. Leach theory of waste glass and the leach effects of ground water, metal barrier, buffer materials and rocks on the waste glass were reviewed. The leach of waste glass was affected by various factors such as composition, pH and Eh of ground water, temperature, pressure, radiation and humic acid. The crystallization, crack, weathering and the formation of altered phases of waste glass which is expected to occur in real disposal site were reviewed. The results of leaching in laboratory and in-situ were compared. The behaviors of radioactive elements leached from waste glass and the use of basalt glass for the long-term natural analogue of waste glass were also written in this report. The appraisal of durability of borosilicate waste glass as a waste media was performed from the known results of leach test and international in-situ tests were introduced. (author). 134 refs., 15 tabs., 24 figs

  13. Physical and optical properties of lithium borosilicate glasses doped with Dy3+ ions

    Science.gov (United States)

    Ramteke, D. D.; Gedam, R. S.; Swart, H. C.

    2018-04-01

    The borosilicate glasses with Dy3+ ions were prepared by the melt quench technique with varying concentration of Dy2O3. The glasses were characterized by the density calculation, absorbance and photoluminescence (PL) spectroscopy measurements. Density and molar volume of the glasses increases with increase in Dy3+ ions in the glass matrix. This behavior is correlated with the higher molecular weight and larger ionic radius of Dy3+ ion compared to the other constituents of glass matrix. Emission of Dy3+ doped glasses showed three bands at 482, 573 and at 665 nm which correspond to 6H15/2 (blue), 6H13/2 (yellow) and 6H11/2 (red) transitions. The emission spectra of glasses with different concentration of Dy3+ ions shows that, glasses with 0.5 mol% of Dy2O3 shows highest emission and decreases with further doping. CIE 1931 chromaticity diagram showed that the emission of these glasses was in the white region. Photographs of these glasses under 349 nm Light emitting diode excitation also confirmed the white light emission from these glasses.

  14. Direct conversion of plutonium-containing materials to borosilicate glass for storage or disposal

    International Nuclear Information System (INIS)

    Forsberg, C.W.; Beahm, E.C.

    1995-01-01

    A new process, the Glass Material Oxidation and Dissolution System (GMODS), has been invented for the direct conversion of plutonium metal, scrap, and residue into borosilicate glass. The glass should be acceptable for either the long-term storage or disposition of plutonium. Conversion of plutonium from complex chemical mixtures and variable geometries into homogeneous glass (1) simplifies safeguards and security; (2) creates a stable chemical form that meets health, safety, and environmental concerns; (3) provides an easy storage form; (4) may lower storage costs; and (5) allows for future disposition options. In the GMODS process, mixtures of metals, ceramics, organics, and amorphous solids containing plutonium are fed directly into a glass melter where they are directly converted to glass. Conventional glass melters can accept materials only in oxide form; thus, it is its ability to accept materials in multiple chemical forms that makes GMODS a unique glass making process. Initial proof-of-principle experiments have converted cerium (plutonium surrogate), uranium, stainless steel, aluminum, and other materials to glass. Significant technical uncertainties remain because of the early nature of process development

  15. Study of Structural Properties of Mesoporous Carbon From Fructose with Zinc Borosilicate Activator

    Directory of Open Access Journals (Sweden)

    Tutik Setianingsih

    2014-04-01

    Full Text Available Structural properties, including pore structure, functional group of carbon surface, and crystal structure of carbon built by zinc borosilicate (ZBS and ZnCl2 (Z have been investigated in this work. Physically, ZBS and ZnCl2 may act as template of carbon, whereas the Zn(II cation act as chemical activator of carbonization. All precursors of ZBS (silicagel, boric acid, and ZnCl2 may act as catalysts of caramelization. The caramelization was conducted hydrothermally at 85oC and thermally 130oC. The carbonization was conducted at 450oC. The resulted carbons were washed by using HF 48% solution, 1M HCl solution, and aquadest respectively. The solid products were characterized by using nitrogen gas adsorption, infrared spectrophotometry, X-ray diffraction, and Transmition Electron Microscopy. Result of research showed that ZBS built larger mesopore volume, larger pore domination of pore size, more hydrophobic carbon, and more amorf than ZnCl2.

  16. Influence of processing conditions on the glass-crystal transition into borosilicate glasses

    Energy Technology Data Exchange (ETDEWEB)

    Deschanels, X.; Cachia, J.N.; Lopez, C.; Peuget, S. [CEA Marcoule, BP 17171, 30207 Bagnols sur Ceze (France)

    2008-07-01

    The precipitation of a crystalline phase in glass is observed when one element exceeds its loading limit (i.e.: solubility limit). In this work we have studied the solubility of different actinides and surrogates (lanthanides and hafnium) in borosilicate glass used for the immobilization of the high-level nuclear waste (HLW glasses). The results obtained show an increase of the solubility limits of these elements with the processing temperature and the redox potential of the melt. The elements at the oxidation state (III) exhibit a higher solubility than the element at oxidation state (IV). In this framework, cerium is an interesting element because its oxidation state tunes from (IV) to (III) as a function of the processing conditions. It is shown that the solubility of cerium can be multiplied by a factor of 20 at 1100 C. degrees. In order to have a better understanding of the mechanisms that underline the evolution of the solubility, XAFS and NMR investigation has been undertaken. Trivalent elements present the characteristics of network-modified cations while tetravalent elements look like network-former cations.

  17. Deformation mechanisms during nanoindentation of sodium borosilicate glasses of nuclear interest

    Energy Technology Data Exchange (ETDEWEB)

    Kilymis, D. A.; Delaye, J.-M., E-mail: jean-marc.delaye@cea.fr [CEA Marcoule, DEN/DTCD, Service d’Etude et Comportement des Matériaux de Conditionnement, BP17171 30207 Bagnols-sur-Cèze Cedex (France)

    2014-07-07

    In this paper we analyze results of Molecular Dynamics simulations of Vickers nanoindentation, performed for sodium borosilicate glasses of interest in the nuclear industry. Three glasses have been studied in their pristine form, as well as a disordered one that is analogous to the real irradiated glass. We focused in the behavior of the glass during the nanoindentation in order to reveal the mechanisms of deformation and how they are affected by microstructural characteristics. Results have shown a strong dependence on the SiO{sub 2} content of the glass, which promotes densification due to the open structure of SiO{sub 4} tetrahedra and also due to the strength of Si-O bonds. Densification for the glasses is primarily expressed by the relative decrease of the Si-O-Si and Si-O-B angles, indicating rotation of the structural units and decrease of free volume. The increase of alkali content on the other hand results to higher plasticity of the matrix and increased shear flow. The most important effect on the deformation mechanism of the disordered glasses is that of the highly depolymerized network that will also induce shear flow and, in combination with the increased free volume, will result in the decreased hardness of these glasses, as has been previously observed.

  18. Deformation mechanisms during nanoindentation of sodium borosilicate glasses of nuclear interest.

    Science.gov (United States)

    Kilymis, D A; Delaye, J-M

    2014-07-07

    In this paper we analyze results of Molecular Dynamics simulations of Vickers nanoindentation, performed for sodium borosilicate glasses of interest in the nuclear industry. Three glasses have been studied in their pristine form, as well as a disordered one that is analogous to the real irradiated glass. We focused in the behavior of the glass during the nanoindentation in order to reveal the mechanisms of deformation and how they are affected by microstructural characteristics. Results have shown a strong dependence on the SiO2 content of the glass, which promotes densification due to the open structure of SiO4 tetrahedra and also due to the strength of Si-O bonds. Densification for the glasses is primarily expressed by the relative decrease of the Si-O-Si and Si-O-B angles, indicating rotation of the structural units and decrease of free volume. The increase of alkali content on the other hand results to higher plasticity of the matrix and increased shear flow. The most important effect on the deformation mechanism of the disordered glasses is that of the highly depolymerized network that will also induce shear flow and, in combination with the increased free volume, will result in the decreased hardness of these glasses, as has been previously observed.

  19. Tc and Re Behavior in Borosilicate Waste Glass Vapor Hydration Tests

    International Nuclear Information System (INIS)

    McKeown, David A.; Buechele, Andrew C.; Pegg, Ian L.; Lukens, Wayne W.; Shuh, David K.

    2007-01-01

    Technetium (Tc), found in some nuclear wastes, is of particular concern with regard to long-term storage, because of its long-lived radioactivity and high mobility in the environment. Tc and rhenium (Re), commonly used as a non-radioactive surrogate for Tc, were studied to assess their behavior in borosilicate glass under hydrothermal conditions in the Vapor Hydration Test (VHT). X-ray absorption spectroscopy (XAS) and scanning electron microscopy (SEM) measurements were made on the original Tc- and Re-containing glasses and their corresponding VHT samples, and show different behavior for Tc and Re under VHT conditions. XAS indicates that, despite starting with different Tc(IV) and Tc(VII) distributions in each glass, the VHT samples have 100% Tc(IV)O 6 environments. SEM shows complete alteration of the original glass, Tc enrichment near the sample surface, and Tc depletion in the center. Perrhenate (Re(VII)O 4 - ) is dominant in both Re-containing samples before and after the VHT, where Re is depleted near the VHT sample surface and more concentrated toward the center. (authors)

  20. Processing and optical characterization of lead calcium titanate borosilicate glass doped with germanium

    Science.gov (United States)

    Gautam, C. R.; Das, Sangeeta; Gautam, S. S.; Madheshiya, Abhishek; Singh, Anod Kumar

    2018-04-01

    In this study, various compositions of lead calcium titanate borosilicate glass doped with a fixed amount of germanium were synthesized using the rapid melt quench technique. The amorphous nature of the synthesized glass was confirmed by X-ray diffraction and scanning electron microscopy analyses. The structural and optical properties were deduced using Raman, Fourier transform infrared (FTIR), and ultraviolet-visible (UV-Vis) spectroscopy. FTIR spectroscopy confirmed the presence of borate groups in triangular and tetrahedral coordination. Infrared and Raman analyses detected the vibrational bonds of Gesbnd Osbnd Ge, Bsbnd Osbnd Ge, Sisbnd Osbnd Ge, Sisbnd Osbnd Si, and Pbsbnd Osbnd Ge. The energy band gaps were evaluated for the prepared glass samples based on Tauc plots of the UV-Vis spectra. The calculated values of the optical band gap decreased from 2.91 to 2.85 eV as the PbO content increased from x = 0.0 to x = 0.7. Furthermore, the Urbach energy was studied based on the UV-Vis results to confirm the disordered structure of the glass. The calculated densities of the glass samples (1.5835 g/cm3 to 3.9184 g/cm3) increased as the concentration of PbO increased, whereas they decreased with the molar volume.

  1. High-level waste borosilicate glass: A compendium of corrosion characteristics. Volume 2

    International Nuclear Information System (INIS)

    Cunnane, J.C.

    1994-03-01

    The objective of this document is to summarize scientific information pertinent to evaluating the extent to which high-level waste borosilicate glass corrosion and the associated radionuclide release processes are understood for the range of environmental conditions to which waste glass may be exposed in service. Alteration processes occurring within the bulk of the glass (e.g., devitrification and radiation-induced changes) are discussed insofar as they affect glass corrosion.This document is organized into three volumes. Volumes I and II represent a tiered set of information intended for somewhat different audiences. Volume I is intended to provide an overview of waste glass corrosion, and Volume 11 is intended to provide additional experimental details on experimental factors that influence waste glass corrosion. Volume III contains a bibliography of glass corrosion studies, including studies that are not cited in Volumes I and II. Volume I is intended for managers, decision makers, and modelers, the combined set of Volumes I, II, and III is intended for scientists and engineers working in the field of high-level waste

  2. High-level waste borosilicate glass: A compendium of corrosion characteristics. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    Cunnane, J.C. [comp.; Bates, J.K.; Bradley, C.R. [Argonne National Lab., IL (United States)] [and others

    1994-03-01

    The objective of this document is to summarize scientific information pertinent to evaluating the extent to which high-level waste borosilicate glass corrosion and the associated radionuclide release processes are understood for the range of environmental conditions to which waste glass may be exposed in service. Alteration processes occurring within the bulk of the glass (e.g., devitrification and radiation-induced changes) are discussed insofar as they affect glass corrosion.This document is organized into three volumes. Volumes I and II represent a tiered set of information intended for somewhat different audiences. Volume I is intended to provide an overview of waste glass corrosion, and Volume 11 is intended to provide additional experimental details on experimental factors that influence waste glass corrosion. Volume III contains a bibliography of glass corrosion studies, including studies that are not cited in Volumes I and II. Volume I is intended for managers, decision makers, and modelers, the combined set of Volumes I, II, and III is intended for scientists and engineers working in the field of high-level waste.

  3. Immobilization of simulated high-level radioactive waste in borosilicate glass: Pilot scale demonstrations

    International Nuclear Information System (INIS)

    Ritter, J.A.; Hutson, N.D.; Zamecnik, J.R.; Carter, J.T.

    1991-01-01

    The Integrated DWPF Melter System (IDMS), operated by the Savannah River Laboratory, is a pilot scale facility used in support of the start-up and operation of the Department of Energy's Defense Waste Processing Facility. The IDMS has successfully demonstrated, on an engineering scale (one-fifth), that simulated high level radioactive waste (HLW) sludge can be chemically treated with formic acid to adjust both its chemical and physical properties, and then blended with simulated precipitate hydrolysis aqueous (PHA) product and borosilicate glass frit to produce a melter feed which can be processed into a durable glass product. The simulated sludge, PHA and frit were blended, based on a product composition program, to optimize the loading of the waste glass as well as to minimize those components which can cause melter processing and/or glass durability problems. During all the IDMS demonstrations completed thus far, the melter feed and the resulting glass that has been produced met all the required specifications, which is very encouraging to future DWPF operations. The IDMS operations also demonstrated that the volatile components of the melter feed (e.g., mercury, nitrogen and carbon, and, to a lesser extent, chlorine, fluorine and sulfur) did not adversely affect the melter performance or the glass product

  4. Effect of various lead species on the leaching behavior of borosilicate waste glass

    International Nuclear Information System (INIS)

    Lehman, R.L.; Kuchinski, F.A.

    1984-01-01

    A borosilicate nuclear waste glass was static leached in pure water, silicate water, and brine solution. Three different forms of lead were included in specified corrosion cells to assess the extent to which various lead species alter the leaching behavior of the glass. Weight loss data indicated that Pb/sub m/ amd PbO greatly reduce the weight loss of glass when leached in pure water, and similar effects were noted in silicate and brine. Si concentrations, which were substantial in the glass-alone leachate, were reduced to below detection limits in all pure water cells containing a lead form. Lead concentration levels in the leachate were controlled by lead form solubility and appeared to be a significant factor in influencing apparent leaching behavior. Surface analysis revealed surface crystals, which probably formed when soluble lead in the leachate reacted with dissolved or activated silica at the glass surface. The net effect was to reduce the lease of some glass constituents to the leachate, although it was not clear whether the actual corrosion of the glass surface was reduced. Significantly different corrosion inhibiting effects were noted among lead metal and two forms of lead oxide. 9 refs., 7 figs., 3 tabs

  5. Volatilization from borosilicate glass melts of simulated Savannah River Plant waste

    International Nuclear Information System (INIS)

    Wilds, G.W.

    1979-01-01

    Laboratory scale studies determined the rates at which the semivolatile components sodium, boron, lithium, cesium, and ruthenium volatilized from borosilicate glass melts that contained simulated Savannah River Plant waste sludge. Sodium and boric oxides volatilize as the thermally stable compound sodium metaborate, and accounted for approx. 90% of the semivolatiles that evolved. The amounts of semivolatiles that evolved increased linearly with the logarithm of the sodium content of the glass-forming mixture. Cesium volatility was slightly suppressed when titanium dioxide was added to the melt, but was unaffected when cesium was added to the melt as a cesium-loaded zeolite rather than as a cesium carbonate solution. Volatility of ruthenium was not suppressed when the glass melt was blanketed with a nonoxidizing atmosphere. Trace quantities of mercury were removed from vapor streams by adsorption onto a silver-exchanged zeolite. A bed containing silver in the ionic state removed more than 99.9% of the mercury and had a high chemisorption capacity. Beds of lead-, copper-, and copper sulfide-exchanged zeolite-X and also an unexchanged zeolite-X were tested. None of these latter beds had high removal efficiency and high chemisorption capacity

  6. Volatilization from borosilicate glass melts of simulated Savannah River Plant waste

    International Nuclear Information System (INIS)

    Wilds, G.W.

    1978-01-01

    Laboratory scale studies determined the rates at which the semivolatile components sodium, boron, lithium, cesium, and ruthenium volatilized from borosilicate glass melts that contained simulated Savannah River Plant waste sludge. Sodium and boric oxides volatilize as the thermally stable compound sodium metaborate, and accounted for approx. 90% of the semivolatiles that evolved. The amounts of semivolatiles that evolved increased linearly with the logarithm of the sodium content of the glass-forming mixture. Cesium volatility was slightly suppressed when titanium dioxide was added to the melt, but was unaffected when cesium was added to the melt as a cesium-loaded zeolite rather than as a cesium carbonate solution. Volatility of ruthenium was not suppressed when the glass melt was blanketed with a nonoxidizing atmosphere. Trace quantities of mercury were removed from vapor streams by adsorption onto a silver-exchanged zeolite. A bed containing silver in the ionic state removed more than 99.9% of the mercury and had a high chemisorption capacity. Beds of lead-, copper-, and copper sulfide-exchanged zeolite-X and also an unexchanged zeolite-X were tested. None of these latter beds had high removal efficiency and high chemisorption capacity

  7. 3 and 4 oxidation state element solubilities in borosilicate glasses. Implement to actinides in nuclear glasses

    International Nuclear Information System (INIS)

    Cachia, J.N.

    2005-12-01

    In order to ensure optimal radionuclides containment, the knowledge of the actinide loading limits in nuclear waste glasses and also the comprehension of the solubilization mechanisms of these elements are essential. A first part of this manuscript deals with the study of the differences in solubility of the tri and tetravalent elements (actinides and surrogates) particularly in function of the melting temperature. The results obtained indicate that trivalent elements (La, Gd, Nd, Am, Cm) exhibit a higher solubility than tetravalent elements (Hf, Th, Pu). Consequently, it was planned to reduce plutonium at the oxidation state (III), the later being essentially tetravalent in borosilicate glasses. An innovating reduction process of multi-valent elements (cerium, plutonium) using silicon nitride has been developed in a second part of this work. Reduced plutonium-bearing glasses synthesized by Si 3 N 4 addition made it possible to double the plutonium solubility from 2 to 4 wt% at 1200 deg C. A structural approach to investigate the differences between tri and tetravalent elements was finally undertaken. These investigations were carried out by X-rays Absorption Spectroscopy (EXAFS) and NMR. Trivalent rare earth and actinide elements seem to behave as network modifiers while tetravalent elements rather present true intermediaries' behaviour. (author)

  8. Characteristics of borosilicate waste glass form for high-level radioactive waste

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Seung Soo; Chun, Kwan Sik; Choi, Jong Won; Kang, Chul Hyung

    2001-03-01

    Basic data, required for the design and the performance assessment of a repository of HLW, suchas the chemical composition and the characteristics of the borosilicate waste glass have been identified according to the burn-ups of spent PWR fuels. The diemnsion of waste canister is 430mm in diameter and 1135mm in length, and the canister should hold less than 2kwatts of heat from their decay of radionuclides contained in the HLW. Based on the reprocessing of 5 years-cooled spent fuel, one canister could hold about 11.5wt.% and 10.8wt.% of oxidized HLW corresponding to their burn-ups of 45,000MWD/MTU and 55,000MWD/MTU, respectively. These waste forms have been recommanded as the reference waste forms of HLW. The characteristics of these wastes as a function of decay time been evaluated. However, after a specific waste form and a specific site for the disposal would be selected, the characteristics of the waste should be reevaluated under the consideration of solidification period, loaded waste, storage condition and duration, site circumstances for the repository system and its performance assessment.

  9. Caractérisation rhéologique et modélisation structurelle des systèmes argile-polymère. Application aux fluides de forage Rheometry and Structural Modelling of Clay-Polymer Systems. Application to Drilling Fluids

    Directory of Open Access Journals (Sweden)

    Cartalos U.

    2006-12-01

    Full Text Available Le comportement rhéologique des systèmes argile-polymère couramment utilisés dans les formulations des fluides de forage est examiné dans cet article. Un protocole d'essai adapté à leur nature thixotrope qui permet d'effectuer des mesures reproductibles est mis au point. Les propriétés intrinsèques du matériau sont ainsi déterminées sur toute la gamme de sollicitations : du comportement solide aux faibles déformations au comportement fluide aux taux de déformations intenses. Il est montré que ces systèmes sont caractérisés par des temps de restructuration longs, par des rhéogrammes en régime permanent présentant un minimum de contrainte et par des dépassements importants de la contrainte lors des essais transitoires. Ces effets peuvent être complètement masqués par des procédures d'essai préconisés par les normes en vigueur dans le forage. Une loi de comportement structurelle récente qui relie les propriétés thixotropes et viscoélastiques du matériau aux mécanismes de création et de rupture des flocs peut reproduire l'ensemble des phénomènes observés. Sa capacité de décrire le changement de structure au sein du fluide sous écoulement ou au repos et les variations associées de la contrainte permet d'envisager une meilleure modélisation de l'hydraulique du forage. The rheological behaviour of clay-polymer systems that are currently used in the formulation of drilling fluids was studied. A specific experimental procedure was used to account for thixotropic effects and obtain, thus, reproducible results. In this way it was possible to determine intrinsic properties in the whole range, from solid behaviour below the yield stress to liquid behaviour at very high shear. These systems are shown to be characterised by very long time scales of structure recovery, by the existence of a minimum shear stress in the steady state flow curve and by important stress overshoots in transient flows. These effects can be

  10. Rational Formulation of Alternative Fuels using QSPR Methods: Application to Jet Fuels Développement d’un outil d’aide à la formulation des carburants alternatifs utilisant des méthodes QSPR (Quantitative Structure Property Relationship: application aux carburéacteurs

    Directory of Open Access Journals (Sweden)

    Saldana D.A.

    2013-06-01

    éveloppement et l’application de méthodes QSPR (Quantitative Structure Property Relationship permettant de relier la structure aux propriétés d’une molécule. Les produits étudiés sont les hydrocarbures (normal et iso-paraffines, naphtènes, aromatiques, etc. et les oxygénés du type alcools et esters. Les propriétés ciblées sont celles figurant dans les spécifications carburants telles que le point d’éclair, l’indice de cétane, la masse volumique et la viscosité. Les modèles prédictifs des propriétés des corps purs ont été établis à partir de données expérimentales de référence provenant en grande partie de la littérature. L’utilité de tels modèles dans la sélection de composés d’intérêt peut être montrée par exemple pour trouver le meilleur compromis pour satisfaire les critères de tenue à froid et de masse volumique des paraffines. Ainsi, si la chaîne carbonée est trop longue alors le critère de tenue à froid risque de ne pas être satisfait. Il est alors nécessaire de favoriser la ramification ou d’ajouter des bases ayant une bonne tenue à froid comme certains naphtènes ou monoaromatiques alkylés. Cependant, cela entraîne bien souvent une masse volumique trop basse par rapport à la spécification. Là encore l’ajout de naphtènes ou de monoaromatiques alkylés issus de la biomasse peut être intéressant.

  11. Study of the retention of fission products by a few common minerals. Application to the treatment of medium activity effluents (1962); Etude de la retention des produits de fission par quelques mineraux usuels. Application aux traitements d'effluents de moyenne activite specifique (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Auchapt, J M [Commissariat a l' Energie Atomique, Centre de Production de Plutonium, Marcoule (France). Centre d' Etudes Nucleaires

    1962-07-01

    The conditions in which strontium is fixed on calcite (the object of the Geneva report P/395 - USA - 1958) are more closely studied and the work is extended to five fission products present in the effluents, and to 17 common rocks and minerals. Although as it turns out this fixation is not suitable as a method of treating the S.T.E. effluents (i.e. those from the Effluent Treatment plant at Marcoule), the study shows that all the crystals considered are strongly contaminated by simple contact with the effluents. (author) [French] Les conditions de fixation du strontium sur la calcite (objet du rapport de Geneve P/395 - USA - 1958) sont approfondies et l'etude est etendue aux cinq produits de fission presents dans les effluents et a 17 roches et minerais courants. Bien qu'en definitive cette fixation se revele inutilisable comme procede de traitement d'effluents S.T.E. (Station de Traitement des Effluents, Marcoule), l'etude montre que tous les cristaux consideres se contaminent fortement par simple contact avec les effluents. (auteur)

  12. Investigation of U3O8 immobilization in the GP-91 borosilicate glass by induction melter with a cold crucible (CCIM)

    International Nuclear Information System (INIS)

    Matyunin, Y.I.; Demin, A.V.; Smelova, T.V.; Yudintsev, S.V.; Lapina, M.I.

    1997-01-01

    One of the most promising and intensively developed methods for the solidification of high-level wastes is their vitrification with the use of a cold crucible induction melter (CCIM), which offers a number of advantages over ceramic melter. This work is concerned with comparison studies on the behavior of uranium in vitreous borosilicate materials synthesized by the traditional technique (melting in muffle furnaces) and CCIM method. The incorporation of uranium oxide U 3 O 8 into the GP-91 borosilicate glass with the use of CCIM technology is investigated. The limiting solubility of uranium in the GP-91 borosilicate glass is evaluated. The phase composition of precipitated dispersed particles based on uranium is determined. Some physicochemical properties of synthesized materials are explored. Investigations into the behavior of uranium in borosilicate glass prepared in the CCIM show a feasibility to synthesize the X-ray amorphous homogeneous borosilicate glasses incorporating as much as 25 - 28 wt% uranium, which is 4 - 5 times larger than that in glasses obtained by the traditional method. (author)

  13. Leaching of the simulated borosilicate waste glasses and spent nuclear fuel under a repository condition

    International Nuclear Information System (INIS)

    Kim, Seung Soo; Chun, Kwan Sik; Kang, Chul Hyung; Suh, Hang Suk

    2002-12-01

    Leaching behaviors of simulated waste glass and spent fuel, contacted on bentonite blocks, in synthetic granitic groundwater were investigated in this study. The leach rate of boron from borosilicate waste glass between the compacted bentonite blocks reached about 0.03 gm-2day-1 at 1500 days, like as that of molybdenum. However, the concentration of uranium in leachate pass through bentonite blocks was less than their detection limits of 2 μg/L and whose yellow amorphous compound was found on the surface of glass contacted with the bentonite blocks. The leaching mechanism of waste glasses differed with their composition. The release rate of cesium from PWR spent fuel in the simulated granitic water without bentonite was leas than $1.0x10 -5 fraction/day after 300 days. The retardation factor of cesium by a 10 -mm thickness of bentonite block was more than 100 for 4-years leaching time. The cumulative release fraction of uranium for 954 days was 0.016% (1.7x10 -7 fraction/day) in granitic water without bentonite. The gap inventory of cesium for spent fuel G23-J11 was 0.15∼0.2%. However, the release of cesium from C15-I08 was 0.9% until 60 days and has being continued after that. Gap inventories of strontium and iodine in G23-J11 were 0.033% and below 0.2%, respectively. The sum of fraction of cesium in gap and grain boundary of G23-J11 was suggested below 3% and less

  14. An enhanced resolution of the structural environment of zirconium in borosilicate glasses

    International Nuclear Information System (INIS)

    Jollivet, P.; Angeli, F.; Bergeron, B.; Gin, S.; Calas, G.; Galoisy, L.; Ruffoni, M.P.; Trcera, N.

    2013-01-01

    The short- and medium-range local environment of zirconium was determined by Zr L 2,3 -edge and K-edge XANES and by Zr K-edge EXAFS in borosilicate glasses with 1 to 8 mol% ZrO 2 . Regardless of the ZrO 2 content of the glass, Zr is six-coordinated in octahedra with Zr-O distances of 2.09 Angstroms. In the glasses containing 8 mol% ZrO 2 , the octahedra are more distorted than at lower ZrO 2 content. Enhanced resolution in the real space is achieved by recording Zr K-edge EXAFS spectra over a broad energy range, enabling to get access k-values up to 20 Angstroems -1 with a high signal to noise ratio. This allows discriminate between the various second neighbor contributions. A correct fit is based on four Si and two B. This local structure around Zr derived from that of zircono-silicates such as elpidite, in which two Si are replaced by two B. The Zr-Si distances increase from 3.63 ± 0.02 to 3.67 ± 0.01 Angstroms, as Zr-B distances remain constant within uncertainties, as ZrO 2 content increases. Two Na are situated at 3.64 ± 0.03 Angstroms from Zr, ensuring charge compensation of the ZrO 6 sites. Increasing the CaO content from 4 to 8 mol% does not lead to any structural change around Zr. (authors)

  15. The influence of ZnO incorporation on the aqueous leaching characteristics of a borosilicate glass

    Science.gov (United States)

    Vance, E. R.; Gregg, D. J.; Karatchevtseva, I.; Griffiths, G. J.; Olufson, K.; Rees, Gregory J.; Hanna, John V.

    2017-10-01

    With increasing ZnO content, short term aqueous durability enhancement of all elements in borosilicate glasses containing 1.0 and 3.85 wt% ZnO was evident in 7-day PCT-B tests. In 14-day MCC-1 type leach tests conducted at 90 °C, surface alteration was very clear in the undoped glass via the formation of strongly altered amorphous material which tended to spall off the surface. No sign of crystallinity was detected by grazing incidence X-ray diffraction or electron microscopy of the surface layers and the surface material was very rich in silica. For the ZnO-bearing glasses, significant growth of particles following PCT leaching for 7 days was observed, due to a build-up of surface ZnO-containing Si-rich material and possible agglomeration. This alteration layer was also observed in MCC-1 type experiments in which cross-section SEM-EDS data were obtained. Raman, infrared and 11B and 29Si MAS NMR spectroscopy showed only slight changes in boron speciation on the addition of up to 9.1 wt% ZnO. Bulk positron annihilation lifetime spectra (PALS) of glasses containing 0-3.85 wt% ZnO could be analysed with three distinct lifetimes and also showed only slight differences. These results indicate that the basic glass structure was essentially not influenced by the ZnO content and that the passivation of the alteration layer is promoted by ZnO content.

  16. Structural and crystallisation study of a rare earth alumino borosilicate glass designed for nuclear waste confinement

    International Nuclear Information System (INIS)

    Quintas, A.

    2007-09-01

    This work is devoted to the study of a rare earth alumino borosilicate glass, which molar composition is 61,81 SiO 2 - 3,05 Al 2 O 3 - 8,94 B 2 O 3 - 14,41 Na 2 O - 6,33 CaO - 1,90 ZrO 2 - 3,56 Nd 2 O 3 , and envisaged for the immobilization of nuclear wastes originating from the reprocessing of high discharge burn up spent fuel. From a structural viewpoint, we investigated the role of the modifier cations on the arrangement of the glass network through different modifications of the glass composition: variation of the Na/Ca ratio and modification of the nature of the alkali and alkaline earth cations. The NMR and Raman spectroscopic techniques were useful to determine the distribution of modifier cations among the glass network and also to cast light on the competition phenomena occurring between alkali and alkaline earth cations for charge compensation of [AlO 4 ] - and [BO 4 ] - species. The neodymium local environment could be probed by optical absorption and EXAFS spectroscopies which enabled to better understand the insertion mode of Nd 3+ ions among the silicate domains of the glass network. Concerning the crystallization behavior we were interested in how the glass composition may influence the crystallization processes and especially the formation of the apatite phase of composition Ca 2 Nd 8 (SiO 4 ) 6 O 2 . In particular, this work underlined the important role of both alkaline earth and rare earth cations on the crystallization of the apatite phase. (author)

  17. Synthesis, electrical and magnetic properties of sodium borosilicate glasses containing Co-ferrites nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Othman, H.A. [Department of Physics, Faculty of Science, Menoufia University, Shibin El-Kom 32511, Menoufia (Egypt); Eltabey, M.M. [Department of Basic Engineering Science, Faculty of Engineering, Menoufia University, Shibin El-Kom, Menoufia (Egypt); Department of Physics, Faculty of Science, Jazan University (Saudi Arabia); Ibrahim, Samia E.; El-Deen, L.M. Sharaf; Elkholy, M.M. [Department of Physics, Faculty of Science, Menoufia University, Shibin El-Kom 32511, Menoufia (Egypt)

    2017-02-01

    Co-ferrites nanoparticles that have been prepared by the co-precipitation method were added to sodium borosilicate (Na{sub 2}O–B{sub 2}O{sub 3}–SiO{sub 2}) glass matrix by the solid solution method and they were characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) and magnetization measurements. (XRD) revealed the formation of the Co-ferrite magnetic crystalline phase embedded in an amorphous matrix in all the samples. The investigated samples by (TEM) showed the formation of the cobalt ferrite nanoparticles with a spherical shape and highly monodispersed with an average size about 13 nm. IR data revealed that the BO{sub 3} and BO{sub 4} are the main structural units of these samples network. IR spectra of the investigated samples showed the characteristic vibration bands of Co-ferrite. Composition and frequency dependent dielectric properties of the prepared samples were measured at room temperature in the frequency range 100–100 kHz. The conductivity was found to increase with increasing cobalt ferrite content. The variations of conductivity and dielectric properties with frequency and composition were discussed. Magnetic hysteresis loops were traced at room temperature using VSM and values of saturation magnetization M{sub S} and coercive field H{sub C} were determined. The obtained results revealed that a ferrimagnetic behavior were observed and as Co-ferrite concentration increases the values of M{sub S} and H{sub C} increase from 2.84 to 8.79 (emu/g) and from 88.4 to 736.3 Oe, respectively.

  18. Borosilicate glass as a matrix for immobilization of SRP high-level waste

    International Nuclear Information System (INIS)

    Wicks, G.G.

    1980-01-01

    Approximately 22 million gallons of high-level radioactive defense waste are currently being stored in large underground tanks located on the Savannah River Plant (SRP) site in Aiken, South Carolina. One option now being considered for long-term management of this waste involves removing the waste from the tanks, chemically processing the waste, and immobilizing the potentially harmful radionuclides in the waste into a borosilicate glass matrix. The technology for producing waste glass forms is well developed and has been demonstrated on various scales using simulated as well as radioactive SRP waste. Recently, full-scale prototypical equipment has been made operational at SRP. This includes both a joule-heated ceramic melter and an in-can melter. These melters are a part of an integrated vitrification system which is under evaluation and includes a spray calciner, direct liquid feed apparatus, and various elements of an off-gas system. Two of the most important properties of the waste glass are mechanical integrity and leachability. Programs are in progress at SRL aimed at minimizing thermally induced cracking by carefully controlling cooling cycles and using ceramic liners or coatings. The leachability of SRP waste glass has been studied under many different conditions and consistently found to be low. For example, the leachability of actual SRP waste glass was found to be 10 -6 to 10 -5 g/(cm 2 )(day) initially and decreasing to 10 -9 to 10 -8 g/(cm 2 )(day) after 100 days. Waste glass is also being studied under anticipated storage conditions. In brine at 90 0 C, the leachability is about 5 x 10 -8 g/(cm 2 )(day) after 60 days. The effects of other geological media including granite, basalt, shale, and tuff are also being studied as part of the multibarrier isolation system

  19. Foire aux questions: Bourse de recherche 2017 du CRDI | CRDI ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    1) Si l'on décide de m'attribuer une bourse de recherche, aurai-je besoin d'un permis de travail ? Veuillez lire les détails sur ce sujet sous la rubrique Admissibilité à la page Web de l'appel. Vous remarquerez que d'importantes modifications ont été apportées aux critères d'admissibilité cette année. 2) Je suis étudiant à la ...

  20. Localized Iron Supply Triggers Lateral Root Elongation in Arabidopsis by Altering the AUX1-Mediated Auxin Distribution[C][W][OA

    Science.gov (United States)

    Giehl, Ricardo F.H.; Lima, Joni E.; von Wirén, Nicolaus

    2012-01-01

    Root system architecture depends on nutrient availability, which shapes primary and lateral root development in a nutrient-specific manner. To better understand how nutrient signals are integrated into root developmental programs, we investigated the morphological response of Arabidopsis thaliana roots to iron (Fe). Relative to a homogeneous supply, localized Fe supply in horizontally separated agar plates doubled lateral root length without having a differential effect on lateral root number. In the Fe uptake-defective mutant iron-regulated transporter1 (irt1), lateral root development was severely repressed, but a requirement for IRT1 could be circumvented by Fe application to shoots, indicating that symplastic Fe triggered the local elongation of lateral roots. The Fe-stimulated emergence of lateral root primordia and root cell elongation depended on the rootward auxin stream and was accompanied by a higher activity of the auxin reporter DR5-β-glucuronidase in lateral root apices. A crucial role of the auxin transporter AUXIN RESISTANT1 (AUX1) in Fe-triggered lateral root elongation was indicated by Fe-responsive AUX1 promoter activities in lateral root apices and by the failure of the aux1-T mutant to elongate lateral roots into Fe-enriched agar patches. We conclude that a local symplastic Fe gradient in lateral roots upregulates AUX1 to accumulate auxin in lateral root apices as a prerequisite for lateral root elongation. PMID:22234997

  1. Self-assembly of bimetallic AuxPd1-x alloy nanoparticles via dewetting of bilayers through the systematic control of temperature, thickness, composition and stacking sequence

    Science.gov (United States)

    Kunwar, Sundar; Pandey, Puran; Sui, Mao; Bastola, Sushil; Lee, Jihoon

    2018-03-01

    Bimetallic alloy nanoparticles (NPs) are attractive materials for various applications with their morphology and elemental composition dependent optical, electronic, magnetic and catalytic properties. This work demonstrates the evolution of AuxPd1-x alloy nanostructures by the solid-state dewetting of sequentially deposited bilayers of Au and Pd on sapphire (0001). Various shape, size and configuration of AuxPd1‑x alloy NPs are fabricated by the systematic control of annealing temperature, deposition thickness, composition as well as stacking sequence. The evolution of alloy nanostructures is attributed to the surface diffusion, interface diffusion between bilayers, surface and interface energy minimization, Volmer-Weber growth model and equilibrium configuration. Depending upon the temperature, the surface morphologies evolve with the formation of pits, grains and voids and gradually develop into isolated semi-spherical alloy NPs by the expansion of voids and agglomeration of Au and Pd adatoms. On the other hand, small isolated to enlarged elongated and over-grown layer-like alloy nanostructures are fabricated due to the coalescence, partial diffusion and inter-diffusion with the increased bilayer thickness. In addition, the composition and stacking sequence of bilayers remarkably affect the final geometry of AuxPd1‑x nanostructures due to the variation in the dewetting process. The optical analysis based on the UV–vis-NIR reflectance spectra reveals the surface morphology dependent plasmonic resonance, scattering, reflection and absorption properties of AuxPd1‑x alloy nanostructures.

  2. Diffusion of cesium in sodium-borosilicate glasses for nuclear waste immobilisation. Diffusie van cesium in natrium borosilicaat glazen voor het immobiliseren van radioaktief afval

    Energy Technology Data Exchange (ETDEWEB)

    Janssen, F.J.J.G.; Sengers, E.G.F. (Keuring van Electrotechnische Materialen NV, Arnhem (Netherlands)); Waal, H. de (TPD-TNO-Glass technology, Eindhoven (Netherlands))

    1989-09-26

    Diffusion of cesium in borosilicate glass for high-level radioactive waste is discussed. For this purpose model glasses with non-radioactive elements are being made, in accordance with the specifications of the reprocessing plants, from which concentration couples are composed. A concentration couple consists of two cylinders of borosilicate glass which contain different amounts of cesium. After heat treatment the couples are studied by means of the scanning electron microscopy and X-ray microanalysis. The model study will provide a basis for predictions of the containment achieved over a longer period of time. (author). 11 refs.; 2 figs.; 2 tabs.

  3. Gamma ray shielding study of barium-bismuth-borosilicate glasses as transparent shielding materials using MCNP-4C code, XCOM program, and available experimental data

    Energy Technology Data Exchange (ETDEWEB)

    Bagheri, Reza; Yousefinia, Hassan [Nuclear Fuel Cycle Research School (NFCRS), Nuclear Science and Technology Research Institute (NSTRI), Atomic Energy Organization of Iran, Tehran (Iran, Islamic Republic of); Moghaddam, Alireza Khorrami [Radiology Department, Paramedical Faculty, Mazandaran University of Medical Sciences, Sari (Iran, Islamic Republic of)

    2017-02-15

    In this work, linear and mass attenuation coefficients, effective atomic number and electron density, mean free paths, and half value layer and 10th value layer values of barium-bismuth-borosilicate glasses were obtained for 662 keV, 1,173 keV, and 1,332 keV gamma ray energies using MCNP-4C code and XCOM program. Then obtained data were compared with available experimental data. The MCNP-4C code and XCOM program results were in good agreement with the experimental data. Barium-bismuth-borosilicate glasses have good gamma ray shielding properties from the shielding point of view.

  4. Gamma Ray Shielding Study of Barium–Bismuth–Borosilicate Glasses as Transparent Shielding Materials using MCNP-4C Code, XCOM Program, and Available Experimental Data

    Directory of Open Access Journals (Sweden)

    Reza Bagheri

    2017-02-01

    Full Text Available In this work, linear and mass attenuation coefficients, effective atomic number and electron density, mean free paths, and half value layer and 10th value layer values of barium–bismuth–borosilicate glasses were obtained for 662 keV, 1,173 keV, and 1,332 keV gamma ray energies using MCNP-4C code and XCOM program. Then obtained data were compared with available experimental data. The MCNP-4C code and XCOM program results were in good agreement with the experimental data. Barium–bismuth–borosilicate glasses have good gamma ray shielding properties from the shielding point of view.

  5. Safety Training: Sensibilisation aux gestes et postures de travail

    CERN Multimedia

    Laetitia Laddada

    2004-01-01

    Nous vous proposons un nouveau cours de sécurité lié aux manutentions manuelles (durée 1 jour) : Sensibilisation aux gestes et postures de travail. Si vous êtes amené à manipuler régulièrement des charges lourdes ou volumineuses, cette formation peut vous aider à prévenir les lésions musculaires ou dorsales. A l'issue de cette formation, vous serez capable d'adopter et d'appliquer les principes de base de sécurité physique et d'économie d'efforts dans les manipulations d'objets. Les cours sont pris en charge par la Commission de Sécurité. L'inscription EDH est obligatoire. Pour plus d'information, veuillez consulter les pages Formation & Développement (Groupe Sécurité). FORMATION EN SECURITE SAFETY TRAINING Laetitia Laddada 73811 - 79236 safety.training@cern.ch

  6. Preparation of Impervious Pyrolytic Carbon Coatings and Application to Dispersed Fuels; Preparation de revetements de carbone pyrolytique etanches - applications aux combustibles disperses; Prigotovlenie nepronitsaemogo uglerodnogo piroliticheskogo pokrytiya dlya dispergirovannogo topliva; Preparacion de revestimientos estancos de carbono piroutico: aplicacion a los combustibles nucleares dispersos

    Energy Technology Data Exchange (ETDEWEB)

    Auriol, A.; David, C. [Battelle Memorial Institute, Geneve (Switzerland); Fillatre, A.; Kurka, G.; Le Boulbin, E.; Rappeneau, J. [Commissariat a l' Energie Atomique (France)

    1963-11-15

    A method of depositing pyrolytic carbon, which adheres well to a graphite support and is gas-tight, was developed and the physical properties of the deposit were evaluated. The fluidized bed technique was used in applying this method of coating to fissile granules of uranium oxide and uranium carbide. After explaining the conditions for coating the granules, the authors examined their macrostructure, microstructure and permeability. Their behaviour at high temperature was investigated with a view to using them in a reactor. (author) [French] Une methode de deposition de carbone pyrolydque adherant bien au graphite support et etanche aux gaz a ete mise au point. Les proprietes physiques du depot ont ete evaluees. Cette methode de revetement a ete transposee a des granules fissiles d'oxyde et de carbure d'uranium en utilisant la technique du lit fluidise. Apres avoir precise les conditions de revetement de ces granules, on etudie leur macrostructure, leur microstructure, ainsi que leur permeabilite. Le comportement de ces granules a haute temperature a ete examine en vue de leur utilisation eventuelle dans un reacteur. (author) [Spanish] Los autores han elaborado un metodo para depositar carbono pirolitico que se adhiere fuertemente al soporte de grafito y es estanco a los gases. Han determinado las propiedades de dicho deposito. Este metodo de revestimiento fue aplicado a granulos fisionables de oxido y de carburo de uranio, utilizando la tecnica del lecho fluidificado. Despues de determinar las condiciones en que se efectua el revestimiento de esos granulos, los autores estudiaron su macroestructura y su microestructura, asi como su permeabilidad. Examinaron tambien su comportamiento a temperatura elevada, con miras a utilizarlos oportunamente en los reactores. (author) [Russian] Razrabotan metod osazhdeniya piroliticheskogo ugleroda, khorosho pokryvayushchego grafitovuyu osnovu s polucheniem nepronitsaemogo dlya gazov pokrytiya. Otseneny fizicheskie svojstva

  7. X-ray absorption studies of chlorine valence and local environments in borosilicate waste glasses

    International Nuclear Information System (INIS)

    McKeown, David A.; Gan, Hao; Pegg, Ian L.; Stolte, W.C.; Demchenko, I.N.

    2011-01-01

    Chlorine (Cl) is a constituent of certain types of nuclear wastes and its presence can affect the physical and chemical properties of silicate melts and glasses developed for the immobilization of such wastes. Cl K-edge X-ray absorption spectra (XAS) were collected and analyzed to characterize the unknown Cl environments in borosilicate waste glass formulations, ranging in Cl-content from 0.23 to 0.94 wt.%. Both X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) data for the glasses show trends dependent on calcium (Ca) content. Near-edge data for the Ca-rich glasses are most similar to the Cl XANES of CaCl 2 , where Cl - is coordinated to three Ca atoms, while the XANES for the Ca-poor glasses are more similar to the mineral davyne, where Cl is most commonly coordinated to two Ca in one site, as well as Cl and oxygen nearest-neighbors in other sites. With increasing Ca content in the glass, Cl XANES for the glasses approach that for CaCl 2 , indicating more Ca nearest-neighbors around Cl. Reliable structural information obtained from the EXAFS data for the glasses is limited, however, to Cl-Cl, Cl-O, and Cl-Na distances; Cl-Ca contributions could not be fit to the glass data, due to the narrow k-space range available for analysis. Structural models that best fit the glass EXAFS data include Cl-Cl, Cl-O, and Cl-Na correlations, where Cl-O and Cl-Na distances decrease by approximately 0.16 A as glass Ca content increases. XAS for the glasses indicates Cl - is found in multiple sites where most Cl-sites have Ca neighbors, with oxygen, and possibly, Na second-nearest neighbors. EXAFS analyses suggest that Cl-Cl environments may also exist in the glasses in minor amounts. These results are generally consistent with earlier findings for silicate glasses, where Cl - was associated with Ca 2+ and Na + in network modifier sites.

  8. Optical properties of 3d transition metal ion-doped sodium borosilicate glass

    International Nuclear Information System (INIS)

    Wen, Hongli; Tanner, Peter A.

    2015-01-01

    Graphical abstract: Photographs of undoped (SiO 2 ) 50 (Na 2 O) 25 (B 2 O 3 ) 25 (SiNaB) glass and transition metal ion-doped (TM) 0.5 (SiO 2 ) 49.5 (Na 2 O) 25 (B 2 O 3 ) 25 glass samples. - Highlights: • 3d transition metal ion (from Ti to Zn) doped SiO 2 -Na 2 O-B 2 O 3 glasses. • Optical properties of doped glasses investigated. • V(IV,V); Cr(III, VI); Mn(II,III); Fe(II,III); Co(II); Ni(II); Cu(II) by XANES, DRS. • Strong visible absorption but only vanadium ion gives strong emission in glass. - Abstract: SiO 2 -Na 2 O-B 2 O 3 glasses doped with 3d-transition metal species from Ti to Zn were prepared by the melting-quenching technique and their optical properties were investigated. The X-ray absorption near edge spectra of V, Cr, and Mn-doped glasses indicate that the oxidation states of V(IV, V), Cr(III, VI) and Mn(II, III) exist in the studied glasses. The oxidation states revealed from the diffuse reflectance spectra of the glasses are V(IV, V), Cr(III, VI), Mn(III), Fe(II, III), Co(II), Ni(II), and Cu(II). Most of the 3d transition element ions exhibit strong absorption in the visible spectral region in the glass. Under ultraviolet excitation, the undoped sodium borosilicate glass produces weak and broad emission, while doping of vanadium introduces strong and broad emission due to the V(V) charge transfer transition. Only weak emission is observed from Ti(IV), Mn(II), Fe(III) and Cu(II), partly resulting from the strong electron–phonon coupling of the 3d-electrons and the relatively high phonon energy of the studied glass host, with the former leading to dominant nonradiative relaxation based on multiphonon processes for most of the 3d excited states

  9. GLASS FABRICATION AND PRODUCT CONSISTENCY TESTING OF LANTHANIDE BOROSILICATE FRIT X COMPOSITION FOR PLUTONIUM DISPOSITION

    Energy Technology Data Exchange (ETDEWEB)

    Marra, J

    2006-11-15

    The Department of Energy Office of Environmental Management (DOE/EM) plans to conduct the Plutonium Disposition Project at the Savannah River Site (SRS) to disposition excess weapons-usable plutonium. A plutonium glass waste form is the preferred option for immobilization of the plutonium for subsequent disposition in a geologic repository. A reference glass composition (Lanthanide Borosilicate (LaBS) Frit B) was developed during the Plutonium Immobilization Program (PIP) to immobilize plutonium in the late 1990's. A limited amount of performance testing was performed on this baseline composition before efforts to further pursue Pu disposition via a glass waste form ceased. Recent FY05 studies have further investigated the LaBS Frit B formulation as well as development of a newer LaBS formulation denoted as LaBS Frit X. The objectives of this present task were to fabricate plutonium loaded LaBS Frit X glass and perform corrosion testing to provide near-term data that will increase confidence that LaBS glass product is suitable for disposal in the Yucca Mountain Repository. Specifically, testing was conducted in an effort to provide data to Yucca Mountain Project (YMP) personnel for use in performance assessment calculations. Plutonium containing LaBS glass with the Frit X composition with a 9.5 wt% PuO{sub 2} loading was prepared for testing. Glass was prepared to support Product Consistency Testing (PCT) at Savannah River National Laboratory (SRNL). The glass was thoroughly characterized using x-ray diffraction (XRD) and scanning electron microscopy coupled with energy dispersive spectroscopy (SEM/EDS) prior to performance testing. A series of PCTs were conducted at SRNL using quenched Pu Frit X glass with varying exposed surface areas. Effects of isothermal and can-in-canister heat treatments on the Pu Frit X glass were also investigated. Another series of PCTs were performed on these different heat-treated Pu Frit X glasses. Leachates from all these PCTs

  10. Optical absorption and gamma-radiation-shielding parameter studies of Tm3+-doped multicomponent borosilicate glasses

    Science.gov (United States)

    Lakshminarayana, G.; Sayyed, M. I.; Baki, S. O.; Lira, A.; Dong, M. G.; Kaky, Kawa M.; Kityk, I. V.; Mahdi, M. A.

    2018-05-01

    Different concentrations (0.1‒2.0 mol%) of Tm3+-doped multicomponent borosilicate glasses with 10 mol% Li2O (alkali) or MgO (alkaline) have been synthesized and their optical absorption and radiation shielding features were studied. For both Li2O and MgO series 0.5 mol% Tm3+-doped glass samples, the evaluated Ωλ ( λ = 2, 4, and 6) Judd-Ofelt (JO) intensity parameters from experimental oscillator strengths were used in estimating the radiative transition probabilities ( A R), branching ratios ( β R), and radiative lifetimes ( τ R) for several emission transitions. Using the XCOM software, the mass attenuation coefficients ( µ/ ρ) for all the fabricated glasses were evaluated within the 0.015‒10 MeV energy range. Also, the ( µ/ ρ) values were calculated at 0.356, 0.662, 1.173, and 1.33 MeV photon energies by MCNP5 simulation code and the results were compared with those obtained by XCOM. The ( µ/ ρ) values for Li2O, as well as MgO series glasses, increase with the addition of Tm2O3 and these values for MgO series glasses are slightly higher with respect to Li2O series glasses. From the ( µ/ ρ) values, effective atomic number ( Z eff), half-value layer (HVL), and mean free path (MFP) were calculated and the HVL and MFP results revealed that high-energy photons have more penetration into a glass sample compared to low-energy photons. Further, geometric progression (GP) fitting method was utilized to calculate the exposure buildup factor (EBF) within the 0.015‒15 MeV energy range. The 2.0 mol% Tm2O3-doped glasses show a better ability to attenuate gamma-rays in comparison to other glass samples, so the addition of Tm2O3 content leads to improvement of the shielding efficiency of the prepared glasses.

  11. Investigation of local environment around rare earths (La and Eu) by fluorescence line narrowing during borosilicate glass alteration

    International Nuclear Information System (INIS)

    Molières, Estelle; Panczer, Gérard; Guyot, Yannick; Jollivet, Patrick; Majérus, Odile; Aschehoug, Patrick; Barboux, Philippe; Gin, Stéphane; Angeli, Frédéric

    2014-01-01

    The local environment of europium in soda-lime borosilicate glasses with a range of La 2 O 3 content was probed by continuous luminescence and Fluorescence Line Narrowing (FLN) to investigate the local environment of rare earth elements in pristine and leached glass. After aqueous leaching at 90 °C at pH 7 and 9.5, rare earths were fully retained and homogeneously distributed in the amorphous alteration layer (commonly called gel). Two separate silicate environments were observed in pristine and leached glasses regardless of the lanthanum content and the leaching conditions. A borate environment surrounding europium was not observed in pristine and leached glasses. During glass alteration, OH groups were located around the europium environment, which became more organized (higher symmetry) in the first coordination shell. -- Highlights: • No borate environment surrounding europium was detected in pristine borosilicate glasses. • Up to 12 mol% of REE2O3 in glass, local environment of europium does not significantly change. • Europium environment becomes more ordered and symmetric in gels than in pristine glasses. • Two distinct silicate sites were observed, as well in pristine glass as in gels (leached glasses). • In altered glasses, OH groups were located around europium

  12. Investigation of local environment around rare earths (La and Eu) by fluorescence line narrowing during borosilicate glass alteration

    Energy Technology Data Exchange (ETDEWEB)

    Molières, Estelle [CEA – DEN-DTCD-LCV-SECM Laboratoire d' études du Comportement à Long Terme, 30207 Bagnols-sur-Cèze (France); Panczer, Gérard; Guyot, Yannick [Institut Lumière Matière, UMR5306 Université Lyon 1-CNRS, Université de Lyon, 69622 Villeurbanne cedex (France); Jollivet, Patrick [CEA – DEN-DTCD-LCV-SECM Laboratoire d' études du Comportement à Long Terme, 30207 Bagnols-sur-Cèze (France); Majérus, Odile; Aschehoug, Patrick; Barboux, Philippe [Laboratoire de Chimie de la Matière Condensée de Paris, UMR-CNRS 7574, École Nationale Supérieure de Chimie de Paris (ENSCP Chimie-ParisTech), 11 rue Pierre et Marie Curie, 75231 Paris (France); Gin, Stéphane [CEA – DEN-DTCD-LCV-SECM Laboratoire d' études du Comportement à Long Terme, 30207 Bagnols-sur-Cèze (France); Angeli, Frédéric, E-mail: frederic.angeli@cea.fr [CEA – DEN-DTCD-LCV-SECM Laboratoire d' études du Comportement à Long Terme, 30207 Bagnols-sur-Cèze (France)

    2014-01-15

    The local environment of europium in soda-lime borosilicate glasses with a range of La{sub 2}O{sub 3} content was probed by continuous luminescence and Fluorescence Line Narrowing (FLN) to investigate the local environment of rare earth elements in pristine and leached glass. After aqueous leaching at 90 °C at pH 7 and 9.5, rare earths were fully retained and homogeneously distributed in the amorphous alteration layer (commonly called gel). Two separate silicate environments were observed in pristine and leached glasses regardless of the lanthanum content and the leaching conditions. A borate environment surrounding europium was not observed in pristine and leached glasses. During glass alteration, OH groups were located around the europium environment, which became more organized (higher symmetry) in the first coordination shell. -- Highlights: • No borate environment surrounding europium was detected in pristine borosilicate glasses. • Up to 12 mol% of REE2O3 in glass, local environment of europium does not significantly change. • Europium environment becomes more ordered and symmetric in gels than in pristine glasses. • Two distinct silicate sites were observed, as well in pristine glass as in gels (leached glasses). • In altered glasses, OH groups were located around europium.

  13. Effects of alpha radiation on hardness and toughness of the borosilicate glass applied to radioactive wastes immobilization

    International Nuclear Information System (INIS)

    Prado, Miguel Oscar; Bernasconi, Norma B. Messi de; Bevilacqua, Arturo Miguel; Arribere, Maria Angelica; Heredia, Arturo D.; Sanfilippo, Miguel

    1999-01-01

    Borosilicate german glass SG7 samples, obtained by frit sintering, were irradiated with different fluences of thermal neutrons in the nucleus of a nuclear reactor. The nuclear reaction 10 B(n,α) 7 Li, where the 10 B isotope is one of the natural glass components, was used to generate alpha particles throughout the glass volume. The maximum alpha disintegration per unit volume achieved was equivalent to that accumulated in a borosilicate glass with nuclear wastes after 3.8 million years. Through Vickers indentations values for microhardness, stress for 50% fracture probability (Weibull statistics) and estimation of the toughness were obtained as a function of alpha radiation dose. Two counterbalanced effects were found: that due to the disorder created by the alpha particles in the glass and that due to the annealing during irradiation (temperature below 240 deg C). Considering the alpha radiation effect, glasses tend decrease Vickers hardness, and to increase thr 50% fracture probability stress with the dose increase. (author)

  14. Preparation and characterization of an improved borosilicate glass matrix for the incorporation of high level radioactive waste (HAW). Pt. 1

    International Nuclear Information System (INIS)

    Guber, W.; Hussain, M.; Kahl, L.; Ondracek, G.; Saidl, J.; Dippel, T.

    1979-08-01

    On the basis of laboratory and technical experience with the preparation and the characterization of borosilicate glasses as solidification matrix for high level radioactive waste solution (HAW), a borosilicate glass composition with optimum properties has been developed. Keeping in view the technical and final storage requirements, a number of glass compositions with varying proportions of influential components as Al, Mg, Na were prepared and thoroughly investigated for certain parameters as specific gravity, thermal conductivity, impact resistance, thermal expansion, viscosity, characteristic temperature points, specific heat, evaporation losses from the melt, electrical conductivity, leach resistance, tendency toward recrystallization and second phase formation. All the compositions (some with different amounts of Gd 2 O 3 , an expected neutron poision) contained 15 wt. % simulated HAW oxides. Samples for investigation were fabricated very close to the actual process conditions of vitrification. Two glass products GP12 and GP26 (3.7% Gd 2 O 3 ) have been selected out of 25 glasses as the optimised products for further thorough investigations. Leach resistance, viscosity at 1420 K, tendency towards recrystallization and second phase formation were the most important deciding factors. (orig.) [de

  15. Corrosion testing of a plutonium-loaded lanthanide borosilicate glass made with Frit B.

    Energy Technology Data Exchange (ETDEWEB)

    Ebert, W. L.; Chemical Engineering

    2006-09-30

    Laboratory tests were conducted with a lanthanide borosilicate (LaBS) glass made with Frit B and added PuO2 (the glass is referred to herein as Pu LaBS-B glass) to measure the dependence of the glass dissolution rate on pH and temperature. These results are compared with the dependencies used in the Defense HLW Glass Degradation Model that was developed to account for HLW glasses in total system performance assessment (TSPA) calculations for the Yucca Mountain repository to determine if that model can also be used to represent the release of radionuclides from disposed Pu LaBS glass by using either the same parameter values that are used for HLW glasses or parameter values specific for Pu LaBS glass. Tests were conducted by immersing monolithic specimens of Pu LaBS-B glass in six solutions that imposed pH values between about pH 3.5 and pH 11, and then measuring the amounts of glass components released into solution. Tests were conducted at 40, 70, and 90 C for 1, 2, 3, 4, and 5 days at low glass-surface-area-to-solution volume ratios. As intended, these test conditions maintained sufficiently dilute solutions that the impacts of solution feedback effects on the dissolution rates were negligible in most tests. The glass dissolution rates were determined from the concentrations of Si and B measured in the test solutions. The dissolution rates determined from the releases of Si and B were consistent with the 'V' shaped pH dependence that is commonly seen for borosilicate glasses and is included in the Defense HLW Glass Degradation Model. The rate equation in that model (using the coefficients determined for HLW glasses) provides values that are higher than the Pu LaBS-B glass dissolution rates that were measured over the range of pH and temperature values that were studied (i.e., an upper bound). Separate coefficients for the rate expression in acidic and alkaline solutions were also determined from the test results to model Pu LaBS-B glass dissolution

  16. Maladies reliées aux loisirs aquatiques

    Science.gov (United States)

    Sanborn, Margaret; Takaro, Tim

    2013-01-01

    Résumé Objectif Passer en revue les facteurs de risque, la prise en charge et la prévention des maladies reliées aux loisirs aquatiques en pratique familiale. Sources des données Des articles originaux et de synthèse entre janvier 1998 et février 2012 ont été identifiés à l’aide de PubMed et des expressions de recherche en anglais water-related illness, recreational water illness et swimmer illness. Message principal Il y a un risque de 3 % à 8 % de maladies gastrointestinales (MGI) après la baignade. Les groupes à risque élevé de MGI sont les enfants de moins de 5 ans, surtout s’ils n’ont pas été vaccinés contre le rotavirus, les personnes âgées et les patients immunodéficients. Les enfants sont à plus grand risque parce qu’ils avalent plus d’eau quand ils nagent, restent dans l’eau plus longtemps et jouent dans l’eau peu profonde et le sable qui sont plus contaminés. Les adeptes des sports dans lesquels le contact avec l’eau est abondant comme le triathlon et le surf cerf-volant sont aussi à risque élevé et même ceux qui s’adonnent à des activités impliquant un contact partiel avec l’eau comme la navigation de plaisance et la pêche ont un risque de 40 % à 50 % fois plus grand de MGI par rapport à ceux qui ne pratiquent pas de sports aquatiques. Il y a lieu de faire une culture des selles quand on soupçonne une maladie reliée aux loisirs aquatiques et l’échelle clinique de la déshydratation est utile pour l’évaluation des besoins de traitement chez les enfants affectés. Conclusion Les maladies reliées aux loisirs aquatiques est la principale cause de MGI durant la saison des baignades. La reconnaissance que la baignade est une source importante de maladies peut aider à prévenir les cas récurrents et secondaires. On recommande fortement le vaccin contre le rotavirus chez les enfants qui se baignent souvent.

  17. La fonction logistique, un outil performant d'analyse et de prévision à moyen terme. Application à la production de pétrole et de gaz aux Etats-Unis, en URSS et dans d'autres pays The Logistic Function, an Efficient Medium-Range Analysis and Forecasting Method

    Directory of Open Access Journals (Sweden)

    Seguret J.

    2006-11-01

    Full Text Available A partir de la similitude observée entre l'évolution de la production pétrolière d'un pays et celle de la pénétration d'un produit dans un marché (fonction logistique, l'auteur expose le principe d'une méthode originale qui permet, sous certaines conditions, de prévoir quelle sera la production annuelle probable d'un pays producteur à un horizon de 10 à 15 ans. La validité de cette méthode est d'abord démontrée sur l'exemple de la production pétrolière aux Etats-Unis. Elle est ensuite illustrée par les résultats obtenus pour un certain nombre de pays : production future de gaz aux Etats-Unis, production pétrolière future du Canada, de l'URSS, du Venezuela et de l'ensemble du monde hors Moyen-Orient. On the basis of the similarity observed between the variation in the petroleum production of a country and that of the penetration of a product into the market (logistic function, this article describes the principle of an original method that can be used, under certain conditions, to forecast the probable annual production of a producing country in 10 to 15 years. The validity of this method is first demonstrated for the example of oil production in the United States. It is then illustrated by results obtained for various other countries, i. e. future gas production in the United States, future oil production of Canada, the Soviet Union, Venezuela and the world as a whole outside of the Middle East.

  18. L’ethnologue aux prises avec les archives - Introduction

    Directory of Open Access Journals (Sweden)

    Marie-Dominique Mouton

    2008-08-01

    Full Text Available Les textes présentés ici invitent à une réflexion sur les matériaux de terrain et plus largement sur la relation qui unit l’ethnologue aux archives, qu’il s’agisse des siennes, données vivantes, inspiratrices de sa recherche, de celles de ses aînés, devenues objets d’étude après leur dépôt dans une institution, ou de toutes les autres archives, constituées et rassemblées, à différentes époques, dans des perspectives administratives, juridiques, historiques ou religieuses, envisagées ici au tr...

  19. Results from the Tokamak Fontenay-aux-Roses

    International Nuclear Information System (INIS)

    Ginot, P.

    1975-01-01

    It became clear in 1969 that confinement and heating in Tokomaks offered great possibilities and the Fontenay-aux-Roses Tokamak (TFR) was built for research on their improved efficiency. A plasma of mean density 4.5.10 13 cm -3 and of maximum electron and ion temperatures 2.5 and 1 keV respectively was obtained. The current induced in the gas reached 0.4MA and discharges were maintained for more than 0.5s. The ion assembly seems to behave according to the mechanism predicted by theory, that of electrons suffers an abnormal energy loss. These results confirm and add to those obtained earlier. The machine is now being used for the detailed study of an energy balance and of the most plausible loss mechanisms (turbulence, impurities) and for the development of new heating methods [fr

  20. Structure, thermal stability and resistance under external irradiation of rare earths and molybdenum-rich alumino-borosilicate glasses

    International Nuclear Information System (INIS)

    Chouard, N.

    2011-01-01

    In France, the highly radioactive nuclear liquid wastes arising from spent nuclear fuel reprocessing (fission products + minor actinides (FPA)) are currently immobilized in an alumino-borosilicate glass called 'R7T7'. In the future, the opportunity of using new alumino-borosilicate glass compositions (HTC glasses) is considered in order to increase the waste loading in glasses and thus significantly decrease the number of glass canisters. However, the increase of the concentration of FPA could lead to the crystallization of rare-earth-rich phases (Ca 2 RE 8 (SiO 4 ) 6 O 2 ) or molybdenum-rich phases (CaMoO 4 , Na 2 MoO 4 ) during melt cooling, which can modify the confinement properties of the glass (chemical durability, self-irradiation resistance..), particularly if they can incorporate radionuclides α or β in their structure. This thesis can be divided into two parts: The first part deals with studying the relationship that can occur between the composition, the structure and the crystallization tendency of simplified seven oxides glasses, belonging to the SiO 2 -B 2 O 3 -Al 2 O 3 -Na 2 O-CaO-MoO 3 -Nd 2 O 3 system and derived from the composition of the HTC glass at 22,5 wt. % in FPA. The impact of the presence of platinoid elements (RuO 2 in our case) on the crystallization of the different phases is also studied. The second part deals with the effect of actinides α decays and more particularly of nuclear interactions essentially coming from recoil nuclei (simulated here by heavy ions external irradiations) on the behaviour under irradiation of an alumino-borosilicate glass containing apatite Ca 2 Nd 8 (SiO 4 ) 6 O 2 crystals, that can incorporate actinides in their structure. Two samples containing apatite crystals with different size are studied, in order to understand the impact of microstructure on the irradiation resistance of this kind of material. (author) [fr

  1. Monsieur Etienne Blanc Premier vice-président de la Région Auvergne-Rhône-Alpes Délégué aux finances, à l'administration générale, aux économies budgétaires et aux politiques transfrontalières

    CERN Multimedia

    Bennett, Sophia Elizabeth

    2017-01-01

    Monsieur Etienne Blanc Premier vice-président de la Région Auvergne-Rhône-Alpes Délégué aux finances, à l'administration générale, aux économies budgétaires et aux politiques transfrontalières

  2. The Application of Various Nondestructive Testing Methods to Fuel Elements of the Orgel Type; Application des Differentes Methodes d'Essais Non Destructifs aux Elements Combustibles du Type Orgel; Primenenie razlichnykh nedestruktivnykh metodov ispytanij k toplivnym ehlementam tipa ''orgel''; Aplicacion de Distintos Metodos de Ensayo No Destructivo a los Elementos Combustibles de Tipo Orgel

    Energy Technology Data Exchange (ETDEWEB)

    Bonnet, P.; Jansen, J. [EURATOM, C.C.R., Ispra (Italy)

    1965-09-15

    . There is a device making it possible to examine four or six fuel elements simultaneously, or two or three separately. Standard radiographic tests. Particular stress is laid on the study of welds, and the limits of the experimental conditions in order to obtain good definition are given. In conclusion, the authors present a plan for a semi-industrial inspection system, describing the various possibilities for treatment, and try to define a general policy of non-destructive tests applied to fuel elements. (author) [French] Le memoire presente les differentes methodes employees pour la detection des defauts dans les tubes de gaine des elements combustibles (defauts de type dimensionnel ou defauts structuraux). Les auteurs evoquent egalement les tests finaux sur elements combustibles complets, en particulier: radiographie des soudures et tests d'etanchete. Ce sujet a deja ete partiellement traite. La recherche des caracteristiques dimensionnelles sur tube de gaine lisse en poudre d'aluminium frittee (SAP) a fait l'objet de recherches assez poussees. En particulier: 1. Mesures des diametres internes et externes par utilisation de capteurs pneumatiques et enregistrement des resultats; 2. Mesures des epaisseurs par utilisation, soit des ultrasons en methode de resonance, soit des rayons y (contrat EURATOM - Istituto Sperimentale Metalli Leggeri); 3. Controle de la fleche; 4. Tests sur tubes a ailettes. La detection des defauts sur tube de gaine lisse a egalement fait l'objet de travaux et un critere de rejet a ete adopte suivant l'utilisation future des tubes de gaines. a) La creation de defauts artificiels en fonction de la nocivite des defauts reels dans la poudre d'aluminium frittee est expliquee dans le memoire. Cette etude a montre, en effet, une grande sensibilite aux defauts du type longitudinal crees generalement lors de la transformation par de grosses inclusions. b) Tests par ultrasons. Defauts longitudinaux: Une comparaison entre la methode a deux capteurs et la

  3. Standardization of a PIGE methodology for simultaneous quantification of low Z elements in barium borosilicate glass samples

    International Nuclear Information System (INIS)

    Chhillar, S.; Acharya, R.; Dasari, K.B.; Pujari, P.K.; Mishra, R.K.; Kaushik, C.P.

    2013-01-01

    In order to standardize particle induced gamma-ray emission (PIGE) methodology for simultaneous quantification of light elements, analytical sensitivities of Li, F, B, Na, Al and Si were evaluated using 4 MeV proton beam ( ∼ 10 nA current) using 3 MV Pelletron at IOP, Bhubaneswar. The PIGE method was validated by determining all six elements in a synthetic sample in graphite matrix and applied to two barium borosilicate glass (BaBSG) samples. The prompt γ-rays emitted from inelastic scattering or nuclear reactions of corresponding isotopes were measured using a 60% HPGe coupled to MCA and the current normalized count rates were used for concentration calculation. (author)

  4. Color-converted remote phosphor prototype of a multiwavelength excitable borosilicate glass for white light-emitting diodes

    International Nuclear Information System (INIS)

    Tian Hua; Qiu Kun; Song Jun; Wang Da-Jian; Liu Ji-Wen

    2012-01-01

    We report a unique red light-emitting Eu-doped borosilicate glass to convert color for warm white light-emitting diodes. This glass can be excited from 394 nm-peaked near ultraviolet light, 466 nm-peaked blue light, to 534 nm-peaked green light to emit the desired red light with an excellent transmission in the wavelength range of 400–700 nm which makes this glass suitable for color conversion without a great cost of luminous power loss. In particular, when assembling this glass for commercial white light-emitting diodes, the tested results show that the color rendering index is improved to 84 with a loss of luminous power by 12 percent at average, making this variety of glass promising for inorganic “remote-phosphor” color conversion

  5. A kinetic model for borosilicate glass dissolution based on the dissolution affinity of a surface alteration layer

    International Nuclear Information System (INIS)

    Bourcier, W.L.; Peiffer, D.W.; Knauss, K.G.; McKeegan, K.D.; Smith, D.K.

    1989-11-01

    A kinetic model for the dissolution of borosilicate glass is used to predict the dissolution rate of a nuclear waste glass. In the model, the glass dissolution rate is controlled by the rate of dissolution of an alkali-depleted amorphous surface (gel) layer. Our model predicts that all components concentrated in the surface layer, affect glass dissolution rates. The good agreement between predicted and observed elemental dissolution rates suggests that the dissolution rate of the gel layer limits the overall rate of glass dissolution. The model predicts that the long-term rate of glass dissolution will depend mainly on ion concentrations in solution, and therefore on the secondary phases which precipitate and control ion concentrations. 10 refs., 5 figs., 1 tab

  6. Investigating the effect of V{sub 2}O{sub 5} addition on sodium barium borosilicate glasses

    Energy Technology Data Exchange (ETDEWEB)

    Halder, Rumu, E-mail: rumuhalder24feb@gmail.com; Sengupta, Pranesh; Dey, G. K. [Materials Science Division, Bhabha Atomic Research Centre, Mumbai-700 085 (India); Sudarsan, V. [Chemistry Division, Bhabha Atomic Research Centre, Mumbai-700 085 (India); Kaushik, C. P. [Waste Management Division, Bhabha Atomic Research Centre, Mumbai-700 085 (India)

    2016-05-23

    V{sub 2}O{sub 5} doped sodium barium borosilicate glasses were characterized by photoluminescence spectroscopy and electron probe microanalyzer (EPMA). The glass remains homogeneous for lower concentration of V{sub 2}O{sub 5} but a phase separation is observed when V{sub 2}O{sub 5} doping is increased beyond 5 mol%. Detailed microanalysis reveals that the phase separated glass consists of a phase containing V, Ba and Si and a separate Si rich phase within the glass matrix. The luminescence study demonstrated that at low concentration the vanadium mainly interacts with the structural units of B/Si while at higher concentrations, V-O-V/ V-O{sup −} Na{sup +}/Ba{sup 2+} linkages are formed.

  7. Phase evolution and dielectric properties of MgTi2O5 ceramic sintered with lithium borosilicate glass

    International Nuclear Information System (INIS)

    Shin, Hyunho; Shin, Hee-Kyun; Jung, Hyun Suk; Cho, Seo-Yong; Hong, Kug Sun

    2005-01-01

    Phase evolution, densification, and dielectric properties of MgTi 2 O 5 dielectric ceramic, sintered with lithium borosilicate (LBS) glass, were studied. Reaction between LBS glass and MgTi 2 O 5 was significant in forming secondary phases such as TiO 2 and (Mg,Ti) 2 (BO 3 )O. The glass addition was not necessarily deleterious to the dielectric properties due to the formation of TiO 2 : permittivity increased and temperature coefficient of resonance frequency could be tuned to zero with the addition of LBS glass, although the inevitable glass-induced decrease of quality factor was not retarded by the formation of TiO 2 . The sintered specimen with 10 wt% LBS fired at 950 deg. C for 2 h showed permittivity of 19.3, quality factor of 6800 GHz, and τ f of -16 ppm/ deg. C

  8. Effect of composition and temperature on viscosity and electrical conductivity of borosilicate glasses for Hanford nuclear waste immobilization

    International Nuclear Information System (INIS)

    Hrma, P.; Piepel, G.F.; Smith, D.E.; Redgate, P.E.; Schweiger, M.J.

    1993-04-01

    Viscosity and electrical conductivity of 79 simulated borosilicate glasses in the expected range of compositions to be produced in the Hanford Waste Vitrification Plant were measured within the temperature span from 950 to 1250 degree C. The nine major oxide components were SiO 2 , B 2 O 3 , Li 2 O, Na 2 O, CaO, MgO, Fe 2 O 3 , Al 2 O 3 , and ZrO 2 . The test compositions were generated statistically. The data were fitted by Fulcher and Arrhenius equations with temperature coefficients being multilinear functions of the mass fractions of the oxide components. Mixture models were also developed for the natural logarithm of viscosity and that of electrical conductivity at 1150 degree C. Least squares regression was used to obtain component coefficients for all the models

  9. Apports et limites des programmes de recherche aux sciences de gestion

    OpenAIRE

    Jeanjean, Thomas; Tixier, Julie

    2001-01-01

    Dans cet article, nous étudions la méthodologie des programmes de recherche de Lakatos (1978) et ses apports aux sciences sociales et en particulier à la recherche en gestion. Notre objectif est triple. Il s'agit d’abord de préciser la nature des programmes de recherche, de les critiquer et de les situer par rapport aux thèses défendues par Popper, Feyerabend et Kuhn. Par ailleurs, nous étudions la transférabilité de la méthodologie de Lakatos aux sciences sociales. Enfin, nous analysons l’in...

  10. DREAM IT, un programme de recherche aux fins d'autonomisation ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    DREAM IT, un programme de recherche aux fins d'autonomisation de tous les Mongols grâce aux TIC ... Plus précisément, la recherche visera l'amélioration de la prestation des services d'éducation dans les régions éloignées grâce aux téléphones mobiles, à la télévision et à Internet; la conception d'un système ...

  11. Utilization of Cs137 to generate a radiation barrier for weapons grade plutonium immobilized in borosilicate glass canisters. Revision 1

    International Nuclear Information System (INIS)

    Jardine, L.J.; Armantrout, G.A.; Collins, L.F.

    1995-01-01

    One of the ways recommended by a recent National Academy of Sciences study to dispose of excess weapons-grade plutonium is to encapsulate the plutonium in a glass in combination with high-level radioactive wastes (HLW) to generate an intense radiation dose rate field. The objective is to render the plutonium as difficult to access as the plutonium contained in existing US commercial spent light-water reactor (LWR) fuel until it can be disposed of in a permanent geological repository. A radiation dose rate from a sealed canister of 1,000 rem/h (10 Sv/h) at 1 meter for at least 30 years after fabrication was assumed in this paper to be a radiation dose comparable to spent LWR fuel. This can be achieved by encapsulating the plutonium in a borosilicate glass with an adequate amount of a single fission product in the HLWS, namely radioactive Cs 137 . One hundred thousand curies of Cs 137 will generate a dose rate of 1,000 rem/h (10 Sv/h) at 1 meter for at least 30 years when imbedded into canisters of the size proposed for the Savannah River Site's vitrified high-level wastes. The United States has a current inventory of 54 MCi of CS 137 that has been separated from defense HLWs and is in sealed capsules. This single curie inventory is sufficient to spike 50 metric tons of excess weapons-grade plutonium if plutonium can be loaded at 5.5 wt% in glass, or 540 canisters. Additional CS 137 inventories exist in the United States' HLWs from past reprocessing operations, should additional curies be required. Using only one fission product, CS 137 , rather than the multiple chemical elements and compounds in HLWs to generate a high radiation dose rate from a glass canister greatly simplifies the processing engineering retirement for encapsulating plutonium in a borosilicate glass

  12. Raman and X-ray absorption spectroscopic studies of hydrothermally altered alkali-borosilicate nuclear waste glass

    Energy Technology Data Exchange (ETDEWEB)

    McKeown, David A., E-mail: davidm@vsl.cua.ed [Vitreous State Laboratory, Catholic University of America, 620 Michigan Ave., N.E., Washington, DC 20064 (United States); Buechele, Andrew C.; Viragh, Carol; Pegg, Ian L. [Vitreous State Laboratory, Catholic University of America, 620 Michigan Ave., N.E., Washington, DC 20064 (United States)

    2010-04-01

    Raman spectroscopy and X-ray absorption spectroscopy (XAS) are used to characterize structural changes that took place in hydrothermally altered (Na,K)-alumina-borosilicate glasses with different Na/K ratios, formulated as part of a durability study to investigate the behavior of glasses for nuclear waste storage. The hydrothermal experiments, or vapor hydration tests (VHT), were performed on each glass for 3 and 20 days at 200 deg. C to accelerate and approximate long-term alteration processes that may occur in a nuclear waste repository. Results found for both glasses and their VHT altered counterparts show little, if any, structural influence from the different starting Na/K ratios. X-ray diffraction, differential scanning calorimetry, scanning electron microscopy, and Raman spectroscopy indicate that the altered samples are mostly amorphous with small amounts of analcime-like and leucite-like crystals within 200 mum of the sample surface and contain up to 9.7 wt.% water or OH. The Raman data are nearly identical for the amorphous portions of all altered VHT samples investigated, and indicate that two glass structural changes took place during alteration: one, partial depolymerization of the alumina-borosilicate network, and two, introduction of water or OH. Al and Si XAS data indicate tetrahedral AlO{sub 4} and SiO{sub 4} environments in the original glasses as well as in the altered samples. Small energy shifts of the Si K-edge also show that the altered VHT samples have less polymerized networks than the original glass. Na XAS data indicate expanded Na environments in the VHT samples with longer Na-O distances and more nearest-neighbor oxygen atoms, compared with the original glasses, which may be due to hydrous species introduced into the expanding Na-sites.

  13. Reinforcement of poly-l-lactic acid electrospun membranes with strontium borosilicate bioactive glasses for bone tissue engineering.

    Science.gov (United States)

    Fernandes, João S; Gentile, Piergiorgio; Martins, Margarida; Neves, Nuno M; Miller, Cheryl; Crawford, Aileen; Pires, Ricardo A; Hatton, Paul; Reis, Rui L

    2016-10-15

    Herein, for the first time, we combined poly-l-lactic acid (PLLA) with a strontium borosilicate bioactive glass (BBG-Sr) using electrospinning to fabricate a composite bioactive PLLA membrane loaded with 10% (w/w) of BBG-Sr glass particles (PLLA-BBG-Sr). The composites were characterised by scanning electron microscopy (SEM) and microcomputer tomography (μ-CT), and the results showed that we successfully fabricated smooth and uniform fibres (1-3μm in width) with a homogeneous distribution of BBG-Sr microparticles (bone marrow-derived mesenchymal stem cells (BM-MSCs) demonstrated that PLLA-BBG-Sr membranes promoted the osteogenic differentiation of the cells as demonstrated by increased alkaline phosphatase activity and up-regulated osteogenic gene expression (Alpl, Sp7 and Bglap) in relation to PLLA alone. These results strongly suggest that the composite PLLA membranes reinforced with the BBG-Sr glass particles have potential as an effective biomaterial capable of promoting bone regeneration. PLLA membranes were reinforced with 10% (w/w) of strontium-bioactive borosilicate glass microparticles, and their capacity to induce the osteogenic differentiation of bone marrow mesenchymal stem cells (BM-MSCs) was evaluated. These membranes presented an increased: degradability, water uptake, Young modulus and tensile strength. We also demonstrated that these membranes are non-cytotoxic and promote the attachment of BM-MSCs. The addition of the glass microparticles into the PLLA membranes promoted the increase of ALP activity (under osteogenic conditions), as well as the BM-MSCs osteogenic differentiation as shown by the upregulation of Alpl, Sp7 and Bglap gene expression. Overall, we demonstrated that the reinforcement of PLLA with glass microparticles results in a biomaterial with the appropriate properties for the regeneration of bone tissue. Copyright © 2016 Acta Materialia Inc. All rights reserved.

  14. Alpha radiation and in-pile annealing effects on the fracture properties of a sintered alumino borosilicate glass

    International Nuclear Information System (INIS)

    Bevilacqua, Arturo M.; Prado, Miguel O.; Messi de Bernasconi, Norma B.; Heredia, Arturo D.; Sanfilippo, Miguel

    1999-01-01

    The alpha radiation and the in-pile during irradiation effects on the hardness, the crack nucleation and the fracture toughness of the German alumino borosilicate glass SG7 were investigated by using the Vickers indentation. Cold pressed and sintered samples were irradiated with thermal neutrons, in the Argentine nuclear reactors RA-3 and RA-6, to produce alpha particles in the whole volume of the glass by means of the (n, alpha)-reaction with B-10. The Vickers hardness, the crack nucleation, as 50 percent fracture probability load, plotted as the Weibull's fracture probability distribution function and the fracture toughness, as critical stress intensity factor K Ic , were correlated to the four cumulative disintegration values. It was ascertained that: a) the Vickers hardness decreases from 5.6 GPa for the non-irradiated sample up to 4.7 GPa for the sample irradiated 70 h at the lower neutron flux (4.0 x 10 - sup 18 - alpha disintegration per cm - sup 3 -), b) the 50 % fracture probability load increases from 1.4 N for the non-irradiated sample up to 4.7 g for the sample irradiated 22 h at the higher flux (6.8 x 10 - sup 18 - alpha disintegration per cm - sup 3 -), and c) the stress intensity factor increases from 0.80 MPa.m - sup 1/2 - for the non irradiated sample up to 0.86 MPa.m - sup 1/2 - for the sample mentioned in b). The in-pile annealing was analyzed by comparing the crack nucleation after irradiation with data obtained by heavy ion irradiation followed by thermal annealing. Results for the SG7 glass were compared to those for soda-lime and borosilicate glasses. (author)

  15. Upconversion studies of Er3+/Yb3+ doped SrO.TiO2 borosilicate glass ceramic system

    International Nuclear Information System (INIS)

    Maheshwari, Aditya; Om Prakash; Kumar, Devendra; Rai, S.B.

    2011-01-01

    Upconversion behaviour has been studied in various matrices and fine powders of SrTiO 3 by previous workers. In present work, Er 3+ /Yb 3+ were doped in appropriate ratio in SrO.TiO 2 borosilicate glass ceramic system to study the upconversion phenomenon. Dielectric properties of this class of glass ceramic system have been extensively investigated by Thakur et al. It has been observed that both upconversion efficiency and dielectric constant increases with transformation of glass into glass ceramic. Therefore, present investigation is based upon the study of optical as well as the electrical properties of same glass ceramic system. In order to prepare different crystalline matrices, two different Er 3+ /Yb 3+ :SrO.TiO 2 borosilicate glasses with same amount of Er 2 O 3 and Yb 2 O 3 were prepared by melt quench method. Glasses were transparent with light-wine colour. Glass ceramics were prepared from the glasses by heat treatment based on DTA (Differential thermal analysis) results. Glass ceramics were fully opaque with brownish-cream colour. Powder X-ray diffraction (XRD) patterns confirmed that two different crystalline matrices, Sr 3 Ti 2 O 7 , Ti 10 O 19 and SrTiO 3 , TiO 2 were present in two glass ceramic samples respectively. Luminescence properties of glass and glass ceramic samples with 976nm laser irradiation showed that the intensities of the green and red emission increased multiple times in glass ceramic than that of the glass. Possible mechanisms responsible for upconversion eg. Energy Transfer (ET) and Excited State Absorption (ESA), were studied through laser pumping power log dependence

  16. Acquisition of rheological and calorimetric properties of borosilicate glass to determine the free energy of formation

    International Nuclear Information System (INIS)

    Linard, Y.; Advocat, Th.

    2000-01-01

    No fundamental thermodynamic data, such as the entropy Δ f S T) and enthalpy Δ f H T) of formation are currently available for nuclear borosilicate glasses. They are necessary to assess the glass thermodynamic stability in water, one of the most important potential long-term glass alteration vectors. Three glass composition ranges were investigated: - 8 compositions ranging from a ternary B 2 O 3 -SiO 2 --Na 2 O (BSN) glass to the simulated SON 68 industrial glass for containment of high active nuclear wastes after reprocessing spent uranium oxide fuel from light water reactors. The basic BSN glass was gradually modified with the additives: Al 2 O 3 , CaO, ZrO 2 , Ce 2 O 3 , Li 2 O and Fe 2 O 3 , and non-radioactive surrogate fission product oxides. - A second using another BSN ternary glass to which Al 2 O 3 , MgO and a group of non-radioactive surrogate fission product oxides, representative of natural uranium GCR fuel, were added. - A third range consisting of various BSN ternary glass compositions. All the glass specimens were fabricated by melting the oxides, carbonates anal nitrates at 1273 to 1473 K in a platinum crucible. Experimental methods based on calorimetry and viscosimetry techniques were used to determine the heat capacity Cp of each glass composition, a necessary parameter in addition to the known heat capacities of the basic glass component oxides, for calculating Δ f S T) and Δ f S T). The heat capacity Cp was measured between 273 K and 1480 K through a combination of three experimental devices: a low-temperature adiabatic calorimeter, a differential scanning calorimeter, and an ice calorimeter. The glass configuration entropy S conf (T g ) necessary to obtain the glass entropy of formation (Eqn.(3)) was determined from tile glass rheological properties. A low-temperature viscosimeter was used to measure the strain ε of a glass specimen subjected to a given uniaxial stress σ to determine the viscosity η. A Couette viscosimeter was used to

  17. VARIABILITY STUDY TO DETERMINE THE SOLUBILITY OF IMPURITIES IN PLUTONIUM-BEARING, LANTHANIDE BOROSILICATE GLASS

    Energy Technology Data Exchange (ETDEWEB)

    Fox, K; Elizabeth Hoffman, E; Charles Crawford, C; Tommy Edwards, T; David Best, D; James Marra, J

    2007-09-26

    This study focuses on the development of a compositional envelope that describes the retention of various impurities in lanthanide borosilicate (LaBS) glass for vitrification and immobilization of excess, defense-related plutonium. A limited amount of impurity data for the various plutonium sources is available and projections were made through analysis of the available information. These projections were used to define types and concentrations of impurities in the LaBS glass compositions to be fabricated and tested. Sixty surrogate glass compositions were developed through a statistically designed approach to cover the anticipated ranges of concentrations for several impurity species expected in the plutonium feeds. An additional four glass compositions containing actual plutonium oxide were selected based on their targeted concentrations of metals and anions. The glasses were fabricated and characterized in the laboratory and shielded cells facility to determine the degree of retention of the impurity components, the impact of the impurities on the durability of each glass, and the degree of crystallization that occurred, both upon quenching and slow cooling. Overall, the LaBS glass system appears to be very tolerant of most of the impurity types and concentrations projected in the plutonium waste stream. For the surrogate glasses, the measured CuO, Ga{sub 2}O{sub 3}, Na{sub 2}O, NiO, and Ta{sub 2}O{sub 5} concentrations fell very close to their target values across the ranges of concentrations targeted in this study for each of these components. The measured CaO and PbO concentrations were consistently higher than the targeted values. The measured Cr{sub 2}O{sub 3} and Fe{sub 2}O{sub 3} concentrations were very close to the targets except for the one highest targeted value for each of these components. A solubility limit may have been approached in this glass system for K{sub 2}O and MgO. The measured Cl{sup -}, F{sup -}, SeO{sub 2} and SO{sub 4}{sup 2

  18. Effect of the Callovian-Oxfordian clayey fraction on borosilicate glass alteration

    International Nuclear Information System (INIS)

    Debure, M.; Frugier, P.; GIN, S.; De Windt, L.; Michau, N.

    2012-01-01

    easily exchangeable Mg and to check whether remaining Mg, especially structural Mg could still feed the solution. The cation exchange capacity (CEC) and the exchangeable cation population after treatment were measured by the cobaltihexamine test, indicating an enrichment of Na (from 14% to 79% in equivalents) of the exchangeable population at the expense of Ca (from 50% to 4%), Mg (from 15% to 6%) and K (from 18% to 7%) compared to the pristine clay-stone. Synthetic borosilicate Mg-free glasses were used as simplified references of the French nuclear glass R7T7. Batch experiments were performed in closed system at 90 deg. C during 150 days. The clay/glass (C/G) weight ratio ranged from 0.01 to 100 for a liquid/solid (L/S) weight ratio of 20. The specific surface was estimated to be around 0.06 m 2 /g and 100 m 2 /g for the glass powder and the clayey fraction, respectively. Chemical analysis of the batch solutions were carried out with time, as well as XRD, SEM and TOF-SIMS analysis of the solids after completion of the batch experiments. Modeling was performed with the GRAAL kinetic model of glass dissolution that considers elements and water diffusion in the alteration layer (Frugier et al., 2008), implemented within the reactive transport code HYTEC (van der Lee et al., 2003). The experiments showed that the higher the clay/glass ratio, the lower the pH 90deg.C and the higher the glass alteration. As shown in Fig. 1, the pH 90deg.C varied from 8.9 for the lowest clay/glass proportion (C/G 1) to 5.4 for the highest one (C/G = 100). The corresponding mean glass dissolution rates are 15 nm/d and 300 nm/d, respectively. A batch test performed with the sole clayey fraction in pure water yielded a pH 90deg.C of 5.2, whereas the test made with the glass alone led to a pH 90deg.C around 9. The main effect of the clayey fraction in the batch tests seems to drop the pH down to more acidic values that concentrations of B (a tracer of the glass alteration) on the one hand, and of

  19. La fabrique des sciences des institutions aux pratiques

    CERN Document Server

    Benninghoff, Martin; Crettaz von Roten, Fabienne; Merz, Martina

    2006-01-01

    Aujourd'hui, les façons de produire, d'organiser, d'évaluer et d'utiliser les savoirs sont en profond débat. De plus en plus, l'Etat, la société civile et l'économie tentent d'influencer les activités des universités et des laboratoires de recherche. Ces développements mettent à l'épreuve tout à la fois les fondements des systèmes d'enseignement supérieur et de recherche, l'autonomie des institutions scientifiques, la définition des frontières des savoirs et l'acceptation des sciences. Dans des contextes suisses et européens, cet ouvrage s'intéresse aux manières dont les sciences et les technologies sont fabriquées, en analysant leurs institutions et les pratiques. A partir d'une approche relationnelle, les sciences et les technologies sont conçues comme des phénomènes profondément sociaux, culturels et politiques. Une telle démarche déstabilise les visions parfois idéalisées et stéréotypées de la construction des savoirs. Des études de cas détaillées décrivent des phénomè...

  20. Introduction aux études sur le genre. - 2e éd. revue et augm.

    NARCIS (Netherlands)

    Bereni, L.; Chauvin, S.; Jaunait, A.; Revillard, A.

    2012-01-01

    Pourquoi offre-t-on des poupées aux filles et des voitures aux garçons ? Pourquoi les femmes gagnent-elles moins que les hommes ? Comment expliquer qu’elles effectuent les deux tiers du travail domestique ? Pourquoi est-ce si mal vu pour un homme d’être efféminé ? Le pouvoir est-il intrinsèquement

  1. Aux/IAA Gene Family in Plants: Molecular Structure, Regulation, and Function

    Directory of Open Access Journals (Sweden)

    Jie Luo

    2018-01-01

    Full Text Available Auxin plays a crucial role in the diverse cellular and developmental responses of plants across their lifespan. Plants can quickly sense and respond to changes in auxin levels, and these responses involve several major classes of auxin-responsive genes, including the Auxin/Indole-3-Acetic Acid (Aux/IAA family, the auxin response factor (ARF family, small auxin upregulated RNA (SAUR, and the auxin-responsive Gretchen Hagen3 (GH3 family. Aux/IAA proteins are short-lived nuclear proteins comprising several highly conserved domains that are encoded by the auxin early response gene family. These proteins have specific domains that interact with ARFs and inhibit the transcription of genes activated by ARFs. Molecular studies have revealed that Aux/IAA family members can form diverse dimers with ARFs to regulate genes in various ways. Functional analyses of Aux/IAA family members have indicated that they have various roles in plant development, such as root development, shoot growth, and fruit ripening. In this review, recently discovered details regarding the molecular characteristics, regulation, and protein–protein interactions of the Aux/IAA proteins are discussed. These details provide new insights into the molecular basis of the Aux/IAA protein functions in plant developmental processes.

  2. Resonant ionization by laser beams: application to ions sources and to study the nuclear structure of radioactive tellurium isotopes; Ionisation resonante par faisceaux laser: application aux sources d'ions et a l'etude de la structure des noyaux radioactifs de tellure

    Energy Technology Data Exchange (ETDEWEB)

    Sifi, R

    2007-07-15

    The radioactive ion beams that are produced through current isotope separators are well separated according to the A mass but not according to the Z parameter. The resonant ionization through laser beams applied to ion sources allows the production of radioactive ion beam in a very selective and efficient way by eliminating the isobaric contamination. The first chapter is dedicated to the resonant ionization by laser beams, we describe the principle, the experimental setting, the lasers used, the ionization schemes and the domain of application. The second chapter deals with the application of resonant ionization to laser ion sources for the production of radioactive ion beams. We present experimental tests performed for getting copper ion beams. Resonant ionization through laser is also used in the spectroscopy experiments performed at the Isolde (isotope separation on-line device) installation in CERN where more than 20 elements are ionized very efficiently. The technique is based on a frequency scanning around the excitation transition of the atoms in order to probe the hyperfine structure. Laser spectroscopy allows the determination of the hyperfine structure as well as the isotopic shift of atoms. In the third chapter the method is applied to the spectroscopy of tellurium atoms. First, we define the 2 parameters on which the extraction is based: charge radius and nuclear moments, then we present several theoretical models that we have used to assess our experimental results. (A.C.)

  3. Cours Sécurité : Sensibilisation aux gestes et postures de travail

    CERN Multimedia

    DGS Unit

    2010-01-01

    Prochaine session le 21 octobre 2010. 12 places disponibles. Ce cours concerne toutes les personnes appelées à réaliser des manutentions manuelles dans le cadre de leurs activités. Contenu du cours : Théorie - Présentation des objectifs du programme ; - L'accident du travail (définition, coûts) ; - Statistiques CNAM ; - Notion d'anatomie (mécanique humaine) ; - Les différentes pathologies (lumbago, sciatique, hernie discale) ; - Discussion sur les problèmes particuliers rencontrés dans la vie courante. Pratique - Les efforts mécaniques sur la colonne dus aux mauvaises postures ; - Les principes de base de l'utilisation de la mécanique humaine ; - Exercices pratiques d'application (sur objets divers standards) ; - Prises de vues au caméscope des positions de chacun. Pour vous inscrire : https://edh.cern.ch/Document/Personnel/TRN?new=YES&...

  4. RHENIUM SOLUBILITY IN BOROSILICATE NUCLEAR WASTE GLASS IMPLICATIONS FOR THE PROCESSING AND IMMOBILIZATION OF TECHNETIUM-99 (AND SUPPORTING INFORMATION WITH GRAPHICAL ABSTRACT)

    Energy Technology Data Exchange (ETDEWEB)

    AA KRUGER; A GOEL; CP RODRIGUEZ; JS MCCLOY; MJ SCHWEIGER; WW LUKENS; JR, BJ RILEY; D KIM; M LIEZERS; P HRMA

    2012-08-13

    The immobilization of 99Tc in a suitable host matrix has proved a challenging task for researchers in the nuclear waste community around the world. At the Hanford site in Washington State in the U.S., the total amount of 99Tc in low-activity waste (LAW) is {approx} 1,300 kg and the current strategy is to immobilize the 99Tc in borosilicate glass with vitrification. In this context, the present article reports on the solubility and retention of rhenium, a nonradioactive surrogate for 99Tc, in a LAW sodium borosilicate glass. Due to the radioactive nature of technetium, rhenium was chosen as a simulant because of previously established similarities in ionic radii and other chemical aspects. The glasses containing target Re concentrations varying from 0 to10,000 ppm by mass were synthesized in vacuum-sealed quartz ampoules to minimize the loss of Re by volatilization during melting at 1000 DC. The rhenium was found to be present predominantly as Re7 + in all the glasses as observed by X-ray absorption near-edge structure (XANES). The solubility of Re in borosilicate glasses was determined to be {approx}3,000 ppm (by mass) using inductively coupled plasma-optical emission spectroscopy (ICP-OES). At higher rhenium concentrations, some additional material was retained in the glasses in the form of alkali perrhenate crystalline inclusions detected by X-ray diffraction (XRD) and laser ablation-ICP mass spectrometry (LA-ICP-MS). Assuming justifiably substantial similarities between Re7 + and Tc 7+ behavior in this glass system, these results implied that the processing and immobilization of 99Tc from radioactive wastes should not be limited by the solubility of 99Tc in borosilicate LAW glasses.

  5. Infrared and x-ray photoelectron spectroscopic studies on sodium borosilicate glass interacted with thermally oxidized aluminides formed on alloy 690

    International Nuclear Information System (INIS)

    Yusufali, C.; Dutta, R.S.; Dey, G.K.; Kshirsagar, R.J.; Jagannath; Mishra, R.K.

    2012-01-01

    Thermally oxidized aluminides formed on Ni-Cr-Fe based superalloy 690 substrates were subjected to interaction with sodium borosilicate melt (used as matrices for immobilization of high-level radioactive liquid waste) at 1248 K for 192 hours. After the interaction, Fourier-transform infrared (FT-IR) spectroscopy analysis of glass samples indicated the incorporation of Al in the glass network. X-ray photoelectron spectroscopy (XPS) of glass specimens revealed modified glass structure. (author)

  6. Des tables pascales aux tables astronomiques et retour.

    Directory of Open Access Journals (Sweden)

    Max Lejbowicz

    2006-05-01

    Full Text Available L’article étudie la naissance et le développement du calendrier ecclésiastique chrétien, i. e. le comput, depuis les premiers témoignages de la célébration annuelle de la résurrection de Jésus jusqu’aux traductions des tables astronomiques arabes au xiie siècle. Il privilégie les procédures qui aboutissent à la détermination des dates pascales et à leur mise en forme tabulaire. Les analyses sont conduites à partir d’un double point de vue. L’un est scientifique. Il s’appuie sur les données astronomiques retenues par Ptolémée et sur l’apport de la tradition mathématique grecque au calcul par approximations. Les cycles soli-lunaires sont posés à partir des fractions continues et le cycle soli-hebdomadaire à partir du plus petit commun multiple. Le second point de vue est social : l’unification du comput participe à celle de la chrétienté comprise comme une configuration politico-religieuse. Deux conclusions s’imposent. Quelle que soit l’importance que la civilisation médiévale a attribuée au comput, il reste que : 1 / les Pâques sont porteuses de significations irréductibles aux techniques chronométriques qui inscrivent cette fête dans le déroulement de l’année ; 2 / ces techniques ont toutefois marqué profondément les curiosités intellectuelles des Latins et les ont préparé à accueillir avec ferveur les zīj et la numération de position.The article studies the birth and development of the Christian ecclesiastical calendar, i.e. the computus, from the first witnesses to the yearly celebration of the resurrection of Jesus to the translations of arabic astronomical tables in the 12th century. It focuses on the procedures which resulted in determinig the dates of Easter and their being put into tabular form. These analyses were undertaken from two perspectives. One was scientific, relying on the astronomical data preserved by Ptolemy and on the contribution of the Greek mathematical

  7. Study of deuterons induced nuclear reactions on light elements (N, Al and Si): Application to containment materials of radioactive wastes; Etude des reactions nucleaires induites par des deuterons sur des elements legers (N, Al, Si): application aux materiaux de confinement des dechets radioactifs

    Energy Technology Data Exchange (ETDEWEB)

    Pellegrino, St

    2004-03-01

    Nuclear reaction analysis is well adapted to the quantification of light element. Profiles of concentration in order to follow elements migration into materials can be undertaken. This technique is used to study the behavior of the future matrices for nuclear waste containment. This technique is isotopic, characterized by a good signal-to-background ratio and a very low detection limit. The probability of a nuclear reaction is linked to a parameter called 'cross section' we have to know in order to carry out quantitative analysis. We have determined excitation curves for nitrogen, aluminium and silicon. These experiments were done with deuterons from 0.5 to 2 MeV. Two methods for the cross section characterization are presented and are in agreement with each other. The second one reduces uncertainty. Data are incorporated in the simulation software SIMNRA. We have compared the results obtained on different samples when we use data in literature or data of the study. We have noticed a great fit improvement with the data of this study. The new cross sections of this work will be integrated in the general data base SIGMABASE. Applications on materials such as Si{sub 3}N{sub 4}, nano-metric powders, WCN and nuclear glass YLaMgSiAlON studied for radioactive waste containment are also presented. (author)

  8. Measurement of the {pi}{sup +} p and {pi}{sup -} p total cross-section from 700 to 1700 MeV, and applications to the dispersion relationships; Mesure des sections efficaces totales {pi}{sup +} p et {pi}{sup -} p entre 700 a 1700 MeV et applications aux relations de dispersion

    Energy Technology Data Exchange (ETDEWEB)

    Stirling, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1966-07-01

    The {pi}{sup +} P and {pi}{sup -} P total cross sections have been measured between 500 and 1700 MeV to eliminate discrepancies in the experimental data. These new values have permitted a more precise calculation of the forward dispersion relation. These relations are well satisfied by the experimental data up to 18 GeV for charge exchange scattering. The dispersion relation for the spin-flip amplitude gives an efficient test for the phase-shift analysis solutions. (author) [French] Les sections efficaces totales {pi}{sup +} P et {pi}{sup -} P ont ete mesurees entre 500 et 1700 MeV pour eliminer les divergences qui existaient entre les resultats experimentaux anterieurs. Ces nouvelles valeurs ont permis de preciser le calcul des relations de dispersion vers l'avant. Dans le cas de la diffusion avec echange de charge ces relations sont en bon accord avec les resultats experimentaux entre 0 et 18 GeV. L'application des relations de dispersion vers l'avant a l'amplitude de spin-flip fournit une methode tres sensible pour comparer differentes series de dephasages en fonction de l'energie. (auteur)

  9. Occasions et difficultés associées aux activités commerciales dans ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    intégreront des reportages photo aux observations sur le terrain; - examineront les résultats à la lumière des Principes directeurs relatifs aux entreprises et aux droits de l'homme de l'ONU, de la théorie du droit, de la théorie du développement et des codes de conduite en matière de responsabilité sociale de l'entreprise.

  10. Mixed approach (numerical modeling / equilibrium analysis) for slope stability analysis: development and application to the dams and open pit mining; Une approche mixte (numerique/equilibre limite) pour le calcul de stabilite des ouvrages en terre: developpement et application aux barrages et talus miniers

    Energy Technology Data Exchange (ETDEWEB)

    Kourdey, A.

    2002-09-15

    The determination of the sliding surface of slope (dam, slope natural..) is one of the important and complicated problems in geotechnics. The Analyze of stability by the methods of Limit Equilibrium like the method of slices are the most used methods. They are able to determine a safety factor for a geometrically defined failure surface. These methods well adapted to the homogeneous mediums, have been developed a lot but they do not integrate the basic relations of mechanics (stress-strain). The numerical methods are better adapted to mediums having more complexity (effect of water, seismicity, fracturing,..). But, they are seldom used to determine a sliding surface and a safety factor. Each family offers appreciable advantages in the analysis of slope stability. For that purpose, we have developed a method that combines the advantages of the numerical methods as well as those of Limit Equilibrium allowing obtaining a slip surface determined by the calculated constraints. This slip surface may be imposed or better optimized, thus providing a minimal safety factor. Methods of operation research are used to obtain this surface. They are search methods by level, dynamic research.. or both at the same time. We integrated these developments in an existing computer code based on the method of Finite Differences known as FLAC. The stresses are determined for a linear behavior and for nonlinear. Interfaces and graphic tools are also produced to facilitate the analysis of stability. The validity of this approach was carried out for a standard case of slope, we analyzed and compared the results with the methods of Limit Equilibrium. The parametric study shows that this approach takes account of different parameters, which influences stability. We also kept a particular place for the application on real cases presenting slopes of different nature (dams, mining slops,...). (author)

  11. Recovery of palladium, cesium, and selenium from heavy metal alkali borosilicate glass by combination of heat treatment and leaching processes

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Zhanglian; Okada, Takashi, E-mail: t-okada@u-fukui.ac.jp; Nishimura, Fumihiro; Yonezawa, Susumu

    2017-06-05

    Highlights: • A separation technique of both noble and less noble metal from glass is studied. • Via reductive heat treatment, 80% of palladium is extracted in liquid bismuth. • Sodium–potassium-rich materials with cesium and selenium are phase separated. • From the materials, over 80% of cesium and selenium are extracted in water. - Abstract: Reductive heat-treatment and leaching process were applied to a simulated lead or bismuth soda-potash-borosilicate glass with palladium, cesium, and selenium to separate these elements. In the reductive heat treatment, palladium is extracted in liquid heavy metal phase generated by the reduction of the heavy metal oxides, whereas cesium and selenium are concentrated in phase separated Na–K-rich materials on the glass surface. From the materials, cesium and selenium can be extracted in water, and the selenium extraction was higher in the treatment of the bismuth containing glass. The chemical forms of palladium in the glass affected the extraction efficiencies of cesium and selenium. Among the examined conditions, in the bismuth glass treatment, the cesium and selenium extraction efficiencies in water were over 80%, and that of palladium in liquid bismuth was over 80%.

  12. Effects of magnesium minerals representative of the Callovian-Oxfordian clay-stone on borosilicate glass alteration

    International Nuclear Information System (INIS)

    Debure, M.

    2012-01-01

    Borosilicate glasses dissolution has been studied in presence of magnesium minerals. Those minerals (dolomite, illite, smectite...) belong to the Callovo-Oxfordian (COx) clay-stone layer, studied in France as a potential site for nuclear waste disposal. Such minerals contain magnesium, an element able to sustain glass alteration when it is available in solution. In the confined media of the wastes disposal, the solids reactivity controls the solution composition and can be the driving force of nuclear glass alteration. Experiments show that magnesium carbonates (hydro-magnesite and dolomite) increase in the glass alteration: the precipitation of magnesium silicates consumes silicon which slows down the formation of the glass passivating layer. The lower the magnesium mineral solubility, the lower the glass alteration. The purified clay phases (illite, smectite...) from the COx layer increase the glass alteration. Half the magnesium was replaced by sodium during the purification process. In such conditions, the effect of clay phases on glass alteration is in part due to the acidic pH-buffering effect of the clay fraction. The GRAAL model implemented in the geochemical transport code HYTEC has confirmed and quantified the mechanisms put in evidence in the experiments. Cells diffusion experiments where the two solids were separated by an inert diffusion barrier allow to valid reactive transport modelling. Such experiments are more representative of the glass package which will be separated from the COx by corrosion products. They show that glass alteration rate is reduced when solids are not close. (author) [fr

  13. The Effect of Caramelization and Carbonization Temperatures toward Structural Properties of Mesoporous Carbon from Fructose with Zinc Borosilicate Activator

    Directory of Open Access Journals (Sweden)

    Tutik Setianingsih

    2014-10-01

    Full Text Available Mesoporous carbon was prepared from fructose using zinc borosilicate (ZBS activator. The synthesis involves caramelization and carbonization processes. The effect of both process temperature toward porosity and functional group of carbon surface are investigated in this research. The caramelization was conducted hydrothermally at 85 and 100 °C, followed by thermally 130 °C. The carbonization was conducted at various temperatures (450–750 °C. The carbon-ZBS composite were washed by using HF 48% solution, 1M HCl solution, and aquadest respectively to remove ZBS from the carbon. The carbon products were characterized with nitrogen gas adsorption-desorption method, FTIR spectrophotometry, X-ray diffraction, and Transmission Electron Microscopy. The highest mesopore characteristics is achieved at 100 °C (caramelization and 450 °C (carbonization, including Vmeso about 2.21 cm3/g (pore cage and 2.32 cm3/g (pore window with pore uniformity centered at 300 Å (pore cage and 200 Å (pore window, containing the surface functional groups of C=O and OH, degree of graphitization about 57% and aromaticity fraction about 0.68.

  14. Enhanced mechanical properties of single walled carbon nanotube-borosilicate glass composite due to cushioning effect and localized plastic flow

    Directory of Open Access Journals (Sweden)

    Sujan Ghosh

    2011-12-01

    Full Text Available A borosilicate glass composite has been fabricated incorporating Single Wall Carbon Nanotubes (SWCNT in the glass matrix by melt-quench technique. Hardness and the fracture toughness of the composite, were found to increase moderately with respect to the base glass. Interestingly one can observe accumulation of SWCNT bundles around the crack zone though no such accumulation was observed in the crack free indentation zone. The enhanced hardness of the composite was discussed by correlating the cushioning as well as toughening behavior of the agglomerated SWCNT bundles. On the other hand enhanced plastic flow was proposed to be the prime reason for the accumulation of SWCNT bundles around the crack, which increases the toughness of the composite by reducing the crack length. Moreover to ascertain the enhanced plasticity of the composite than that of the glass we calculated the recovery resistance of glass and the composite where recovery resistance of composite was found to be higher than that of the glass.

  15. Chemical durability of alkali-borosilicate glasses studied by analytical SEM, IBA, isotopic-tracing and SIMS

    Science.gov (United States)

    Trocellier, P.; Djanarthany, S.; Chêne, J.; Haddi, A.; Brass, A. M.; Poissonnet, S.; Farges, F.

    2005-10-01

    Simple and complex alkali-borosilicate glasses were submitted to aqueous corrosion at room temperature, 60 and 90 °C in solutions with pH ranging between 0 and 12. Analytical scanning electron microscopy (SEM), ion beam analysis (IBA) techniques, isotopic tracing and secondary ion mass-depth profiling (SIMS) have been used to investigate the variations of the surface composition of glass. In acidic medium, the glass surface is generally covered by a thick hydrated silica layer, mobile elements like Li, Na and B and transition elements (Fe, Zr, Mo, etc.) are strongly depleted. Near pH 7, relative enrichments of aluminium, iron and rare earths are shown together with strong Li, Na and B depletions. In basic medium, the glass surface exhibits relative enrichments of the major part of transition metals (from Cr to U) whereas mobile elements seem to be kept close to their nominal concentration level at the glass surface and Si is severely impoverished. Hydrogen incorporated at the glass surface after leaching is much more immobile in neutral and basic media than in acid medium.

  16. Irradiations effects on the structure of boro-silicated glasses: long term behaviour of nuclear waste glassy matrices

    International Nuclear Information System (INIS)

    Bonfils, J. de

    2007-09-01

    This work deals with the long term behaviour of R7T7-type nuclear waste glasses and more particularly of non-active boro-silicated glasses made up of 3 or 5 oxides. Radioactivity of active glasses is simulated by multi energies ions implantations which reproduce the same defects. The damages due to the alpha particles are simulated by helium ions implantations and those corresponding to the recoil nucleus are obtained with gold ions ones. Minor actinides, stemming from the used fuel, is simulated by trivalent rare-earths (Eu 3+ and Nd 3+ ). In a first part, we have shown by macroscopic experiments (Vickers hardness - swelling) and optical spectroscopies (Raman - ATR-IR) that the structure of the glassy matrices is modified under implantations until a dose of 2,3.10 13 at.cm -2 , which corresponds to a R7T7 storage time estimated at 300 years. Beyond this dose, no additional modifications have been observed. The second part concerns the local environment of the rare-earth ions in glasses. Two different environments were found and identified as follows: one is a silicate rich one and the other is attributed to a borate rich one. (author)

  17. In Vitro Degradation of Borosilicate Bioactive Glass and Poly(l-lactide-co-ε-caprolactone Composite Scaffolds

    Directory of Open Access Journals (Sweden)

    Jenna Tainio

    2017-11-01

    Full Text Available Composite scaffolds were obtained by mixing various amounts (10, 30 and 50 weight % [wt %] of borosilicate bioactive glass and poly(l-lactide-co-ε-caprolactone (PLCL copolymer. The composites were foamed using supercritical CO2. An increase in the glass content led to a decrease in the pore size and density. In vitro dissolution/reaction test was performed in simulated body fluid. As a function of immersion time, the solution pH increased due to the glass dissolution. This was further supported by the increasing amount of Ca in the immersing solution with increasing immersion time and glass content. Furthermore, the change in scaffold mass was significantly greater with increasing the glass content in the scaffold. However, only the scaffolds containing 30 and 50 wt % of glasses exhibited significant hydroxyapatite (HA formation at 72 h of immersion. The compression strength of the samples was also measured. The Young’s modulus was similar for the 10 and 30 wt % glass-containing scaffolds whereas it increased to 90 MPa for the 50 wt % glass containing scaffold. Upon immersion up to 72 h, the Young’s modulus increased and then remained constant for longer immersion times. The scaffold prepared could have great potential for bone and cartilage regeneration.

  18. Deep-UV Raman spectroscopic analysis of structure and dissolution rates of silica-rich sodium borosilicate glasses

    Energy Technology Data Exchange (ETDEWEB)

    Pierce, Eric M [ORNL; WindischJr., Charles F. [Pacific Northwest National Laboratory (PNNL); Burton, Sarah D. [Pacific Northwest National Laboratory (PNNL); Bovaird, Chase C. [Pacific Northwest National Laboratory (PNNL)

    2010-01-01

    As part of ongoing studies to evaluate relationships between structure and rates of dissolution of silicate glasses in aqueous media, sodium borosilicate glasses of composition Na2O xB2O3 (3 x)SiO2, with x 1 (Na2O/B2O3 ratio 1), were analyzed using deep-UV Raman spectroscopy. Results were quantified in terms of the fraction of SiO4 tetrahedra with one non-bridging oxygen (Q3) and then correlated with Na2O and B2O3 content. The Q3 fractionwas found to increase with increasing Na2O content, in agreement with studies on related glasses, and, as long as the value of x was not too high, this contributed to higher rates of dissolution in single pass flow-through testing. In contrast, dissolution rates were less strongly determined by the Q3 fraction when the value of x was near unity, and appeared to grow larger upon further reduction of the Q3 fraction. Results were interpreted to indicate the increasingly important role of network hydrolysis in the glass dissolution mechanism as the BO4 tetrahedron replaces the Q3 unit as the charge-compensating structure for Na+ ions. Finally, the use of deep-UV Raman spectroscopy was found to be advantageous in studying finely powdered glasses in cases where visible Raman spectroscopy suffered from weak Raman scattering and fluorescence interference.

  19. White-Beam X-ray Diffraction and Radiography Studies on High-Boron Containing Borosilicate Glass at High Pressures

    Science.gov (United States)

    Ham, Kathryn; Vohra, Yogesh; Kono, Yoshio; Wereszczak, Andrew; Patel, Parimal

    Multi-angle energy-dispersive x-ray diffraction studies and white-beam x-ray radiography were conducted with a cylindrically shaped (1 mm diameter and 0.7 mm high) high-boron content borosilicate glass sample (17.6% B2O3) to a pressure of 13.7 GPa using a Paris-Edinburgh (PE) press at Beamline 16-BM-B, HPCAT of the Advanced Photon Source. The measured structure factor S(q) to large q = 19 Å-1, is used to determine information about the internuclear bond distances between various species of atoms within the glass sample. Sample pressure was determined with gold as a pressure standard. The sample height as measured by radiography showed an overall uniaxial compression of 22.5 % at 13.7 GPa with 10.6% permanent compaction after decompression to ambient conditions. The reduced pair distribution function G(r) was extracted and Si-O, O-O, and Si-Si bond distances were measured as a function of pressure. Raman spectroscopy of pressure recovered sample as compared to starting material showed blue-shift and changes in intensity and widths of Raman bands associated with silicate and B3O6 boroxol rings. US Army Research Office under Grant No. W911NF-15-1-0614.

  20. Effects of cobalt-60 gamma radiation on the strength-related internal structure of the borosilicate glass

    International Nuclear Information System (INIS)

    Cafe, Arven I.; Liamzon, Angelie J.

    2011-03-01

    Borosilicate glass in the form of glass slides (1.Omm in thickness and cut into 12.5mm x 55.Omm surface area) was examined to determine the reusability or recyclability and strength of glass apparatuses or compartments after exposing to gamma irradiation from Co-60 source. After knowing the initial parameters using EDXRF under six secondary targets, glass specimens prepared was subjected to gamma radiation for doses 3kGy, 6kGy, 15kGy, 25kGy, and 100kGy. Results of characterization under FTIR provides information about the occurred extension of B-O-Si and B-O-B linkages for lower doses (3-25kGy), while destruction of Si-O bonds for higher dose (100kGy). It shows direct relationship on the observed color change from clear ransparent to deep brown corresponding to the change in optical densities as irradiation dose increases. Ability to fade the induced deep brown color was also observed for a certain time interval which satisfies that this type of glass exhibits self healing property. Although, average energy of about 1.25MeV causes rearrangement of atoms within the glass, according to the XRD result, it remained to be an amorphous solid even in higher dose applied which satisfies that remanufacturing and recycling is possible. (author)

  1. Effects of Sb2O3 on the Mechanical Properties of the Borosilicate Foam Glasses Sintered at Low Temperature

    Directory of Open Access Journals (Sweden)

    Chenxi Zhai

    2014-01-01

    Full Text Available The physical properties and microstructure of a new kind of borosilicate foam glasses with different Sb2O3 doping content are comprehensively investigated. The experimental results show that appropriate addition of Sb2O3 has positive impact on the bulk porosity and compressive strength of the foam glass. It is more suitable in this work to introduce 0.9 wt.% Sb2O3 into the Na2O-K2O-B2O3-Al2O3-SiO2 basic foam glass component and sinter at 775°C. And the obtained foam glasses present much more uniform microstructure, large pore size, and smooth cell walls, which bring them with better performance including a lower bulk density, low water absorption, and an appreciable compressive strength. The microstructure analysis indicates that, with the increase of the content of Sb2O3 additives, the cell size tends to increase at first and then decreases. Larger amounts of Sb2O3 do not change the crystalline phase of foam glass but increase its vitrification. It is meaningful to prepare the foam glass at a relatively low temperature for reducing the heat energy consumption.

  2. Chemical durability of alkali-borosilicate glasses studied by analytical SEM, IBA, isotopic-tracing and SIMS

    International Nuclear Information System (INIS)

    Trocellier, P.; Djanarthany, S.; Chene, J.; Haddi, A.; Brass, A.M.; Poissonnet, S.; Farges, F.

    2005-01-01

    Simple and complex alkali-borosilicate glasses were submitted to aqueous corrosion at room temperature, 60 and 90 deg. C in solutions with pH ranging between 0 and 12. Analytical scanning electron microscopy (SEM), ion beam analysis (IBA) techniques, isotopic tracing and secondary ion mass-depth profiling (SIMS) have been used to investigate the variations of the surface composition of glass. In acidic medium, the glass surface is generally covered by a thick hydrated silica layer, mobile elements like Li, Na and B and transition elements (Fe, Zr, Mo, etc.) are strongly depleted. Near pH 7, relative enrichments of aluminium, iron and rare earths are shown together with strong Li, Na and B depletions. In basic medium, the glass surface exhibits relative enrichments of the major part of transition metals (from Cr to U) whereas mobile elements seem to be kept close to their nominal concentration level at the glass surface and Si is severely impoverished. Hydrogen incorporated at the glass surface after leaching is much more immobile in neutral and basic media than in acid medium

  3. Impact of soda-lime borosilicate glass composition on water penetration and water structure at the first time of alteration

    International Nuclear Information System (INIS)

    Rebiscoul, D.; Bruguier, F.; Gin, S.; Magnin, V.

    2012-01-01

    In this study, the impact of soda-lime borosilicate glass composition and particularly the effect of charge compensators such Ca and Na and, of network formers such Si and Zr, on water penetration and water structure at the first time of alteration were investigated. Two non-destructive techniques were combined: the Fourier transform infrared spectroscopy in attenuated total reflection geometry to precise the predominant alteration mechanisms and assess the water structure in altered zone and the grazing incidence X-ray reflectometry to determine the thickness of the altered glass zone allowing to calculate the water diffusion coefficients through the glasses. The results of glass alteration at pH = 3 and 30 degrees C have shown that hydrolysis was the predominant mechanism after few seconds for glass having a high amount of non-binding oxygen. For the other glasses, which for the diffusion was the limiting reaction, the calculated water diffusion coefficients were comprised between 10 -21 and 10 -19 m 2 .s -1 and vary as a function of glass composition. An activation energy of 76.9 kJ.mol -1 was calculated and appears to be higher than inert gas diffusion through the glass highlighting that water molecules strongly interact with the glass matrix. (authors)

  4. The Pulsed Neutron Technique Applied to Fast Non-Multiplying Assemblies; Application de la Methode des Neutrons Pulses aux Assemblages Non Multiplicateurs a Neutrons Rapides; Primenenie metoda impul'snykh nejtronov pri izuchenii povedeniya bystrykh nejtronov v nerazmnozhayushchikh sborkakh; Aplicacion de la Tecnica de los Neutrones Pulsados a Conjuntos Rapidos de Materiales No Multiplicadores

    Energy Technology Data Exchange (ETDEWEB)

    Beghian, L. E.; Wilensky, S. [Massachusetts Institute of Technology, Cambridge, MA (United States)

    1965-10-15

    Graaff a impulsions de l'ordre de la nanoseconde pour etudier le comportement de neutrons rapides dans des assemblages metalliques non multiplicateurs. Ils ont mesure les sections efficaces non elastiques du fer pour les neutrons rapides. La methode employee est semblable a celle qu'on utilise pour mesurer les sections efficaces d'absorption dans des assemblages a neutrons thermiques, avec cette difference que les temps de decroissance pour les neutrons rapides sont de l'ordre de la nanoseconde et non de la microseconde. Des bouffees de neutrons monoenergetiques d'une nanoseconde sont introduites dans des assemblages en fer de dimensions diverses. On remarque que dans ces assemblages le flux de neutrons decroit exponentiellement avec une constante de decroissance caracteristique. La constante de decroissance est composee d'une somme de termes qui representent la perte de neutrons due aux fuites et a la degradation en energie. La degradation en energie represente une perte de neutrons, car un detecteur de neutrons dont les donnees sont entachees d'une erreur systematique est utilise. On peut determiner le terme correspondant a la diffusion elastique et inelastique en mesurant la constante de decroissance consideree comme une fonction des dimensions de l'assemblage. Suit un developpement theorique pour le calcul de la fraction de ce terme qui est due a la diffusion elastique et, par consequent, pour la determination de la section efficace non elastique. Le procede theorique de calcul de cette fraction a fait l'objet de verifications experimentales. Les auteurs ont mesure la section efficace non elastique du fer par cette methode pour des energies de neutrons primaires comprises entre 0,8 et 1,5 MeV. La methode de la source puisee decrite ci-dessus a ete utilisee pour mesurer des constantes de decroissance pour des plaques de plomb. Les conditions de l'experience sont approximativement conformes aux hypotheses generalement admises lorsqu'on resout l'equation de transport de

  5. Formation en TIC destinée aux personnes handicapées en ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Formation en TIC destinée aux personnes handicapées en Amérique latine. En Amérique latine et dans les Caraïbes, les personnes handicapées représentent environ 10 % de la population. La population de cette région affiche des taux de pauvreté et de chômage élevés; assurer des moyens de subsistance décents aux ...

  6. Pourquoi la philosophie indienne ne doit pas être laissée aux seuls philosophes

    OpenAIRE

    Bronkhorst, Johannes

    2017-01-01

    Des historiens de l’astronomie, de la linguistique ou de la médecine indiennes anciennes, on attend généralement qu’ils soient familiers des contreparties occidentales modernes de ces disciplines. Mais qu’en est-il de la philosophie ? Et tout d’abord, existe-t-il en Inde ancienne quelque chose comme une philosophie dont on pourrait faire l’histoire ? Et si oui, qui en sera le meilleur exégète ? Le philosophe attentif aux enjeux systématiques, ou l’historien sensible aux contextes de productio...

  7. Thermal modeling. Application to lithium batteries; Modelisation thermique. Application aux accumulateurs lithium

    Energy Technology Data Exchange (ETDEWEB)

    Alexandre, A. [Ecole Nationale Superieure de Mecanique et d`Aerotechnique (ENSMA), 86 - Poitiers (France); Flament, P. [SAFT, 33 - Bordeaux (France); Marolleau, T. [SAFT, Advanced and Industrial Battery Group, 86 - Poitiers (France); Guiot, T.; Lefriec, C. [TSR Futuropolis, 86 - Chasseneuil du Poitou (France)

    1996-12-31

    The thermal modeling of electrochemical batteries is today an integral part of the design and validation operations of new products. The Li-ion pair allows to increase the power density of batteries but leads to higher heat fluxes during charging-output cycles. Thus, the thermal control has become more crucial and requires the use of modeling. SAFT and TSR companies are involved in this approach and use the ESACAP software. This paper presents this software which uses a nodal method for the modeling of the coupled thermal and electrical processes that take place inside elementary cells and batteries. (J.S.)

  8. Discrete modelling of rock-fill: Application to dams; Modelisation discrete des enrochements: Application aux barrages

    Energy Technology Data Exchange (ETDEWEB)

    Deluzarche, R

    2004-12-15

    In this study, a discrete numerical model for rock-fill is built up and validated. This model is based upon the definition of bidimensional clusters that can break in different ways. The resistance of the inner bonds of the clusters are calibrated by reproducing the size-dependant resistance of rock blocks submitted to crushing tests. Numerical simulations of laboratory tests are performed on samples made of the different clusters. Tests on crushable clusters emphasize the utmost importance of particle crushing on the behaviour. A dam is modelled. The role of the placed-rock face on the stabilisation is underlined. The deformation of the dam during reservoir filling, as well as its good seismic behaviour is well reproduced by the model. The model makes it possible to show the influence of particle breakage on the settlements. (author)

  9. Thermal modeling. Application to lithium batteries; Modelisation thermique. Application aux accumulateurs lithium

    Energy Technology Data Exchange (ETDEWEB)

    Alexandre, A [Ecole Nationale Superieure de Mecanique et d` Aerotechnique (ENSMA), 86 - Poitiers (France); Flament, P [SAFT, 33 - Bordeaux (France); Marolleau, T [SAFT, Advanced and Industrial Battery Group, 86 - Poitiers (France); Guiot, T; Lefriec, C [TSR Futuropolis, 86 - Chasseneuil du Poitou (France)

    1997-12-31

    The thermal modeling of electrochemical batteries is today an integral part of the design and validation operations of new products. The Li-ion pair allows to increase the power density of batteries but leads to higher heat fluxes during charging-output cycles. Thus, the thermal control has become more crucial and requires the use of modeling. SAFT and TSR companies are involved in this approach and use the ESACAP software. This paper presents this software which uses a nodal method for the modeling of the coupled thermal and electrical processes that take place inside elementary cells and batteries. (J.S.)

  10. Report of transparency and nuclear safety 2007 CEA Fontenay aux Roses; Rapport transparence et securite nucleaire 2007 CEA Fontenay aux Roses

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    This report presents the activities of the CEA Center of Fontenay aux roses for the year 2007. After many years of decommissioning and dismantling of nuclear installations, the Center is now devoted (since 2005) to the development of research programmes on biology and biomedical technologies. The actions concerning the safety, the radiation protection, the significant events, the release control and the environmental impacts and the wastes stored on the center are discussed. (A.L.B.)

  11. Adaptation aux répercussions de l'élévation du niveau de la mer ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    , la pollution, l'utilisation intensive des terres, la croissance démographique et la dégradation des écosystèmes. Elles sont par ailleurs exposées aux répercussions de la hausse du niveau de la mer et notamment aux inondations. Réduire la ...

  12. Identification and gene expression analysis of AUX1 influencing adventitious root induction in olive cuttings (Olea europaea L.

    Directory of Open Access Journals (Sweden)

    Seyed Mehdi Hosseini Mazinani

    2014-12-01

    Full Text Available Olive is one of the most important fruit crops throughout the Mediterranean Basin, mainly propagated by cuttings. The adventitious root development is a key stage in vegetative propagation however the low rooting capacity of some cultivars severely affects the efficiency of olive clonal propagation. Auxin Influx Carrier gene (AUX1, plays a key role in lateral root formation in many plant species promoting the export of IAA from newly developing leaves to lateral root primordia. Putative olive homologues were amplified by using degenerate primers designed on the conserved regions of AUX1 transcripts identified in other plants. Transcript and amino acid sequences in root (OeAUX1R and base of cutting (OeAUX1B were different causes of polymorphisms relating to possible distinct roles in these tissues. In order to investigate the gene expression patterns, Real-time PCR was performed on cuttings during the rooting stage collected from genotypes characterized by high and low rooting ability. Moreover, the gene expression was investigated on different olive tissues. Preliminary results showed that the expression of OeAUX1B and OeAUX1R in base of cuttings and roots of the high-rooting genotype were higher which suggests the hypothesis of the involvement of OeAUX1 in olive rooting. Bioinformatics analysis revealed that AUX1 gene had 8 exons in olive and the sequence of this gene in plant was conserved during evolution.

  13. Deep-UV Raman spectroscopic analysis of structure and dissolution rates of silica-rich sodium borosilicate glasses

    Energy Technology Data Exchange (ETDEWEB)

    Windisch, Charles F.; Pierce, Eric M.; Burton, Sarah D.; Bovaird, Chase C.

    2011-03-24

    As part of ongoing studies to evaluate the relationships between structural variations in silicate glasses and rates of glass dissolution in aqueous media, molecular structures present in sodium borosilicate glasses of composition Na2O.xB2O3.(3-x)SiO2, with x 1 (Na2O/B2O3 ratio 1), were analyzed using deep-UV Raman spectroscopy. The results were quantified in terms of the fraction of SiO4 tetrahedra with one non-bridging oxygen (Q3) and then correlated with Na2O and B2O3 content. Increasing Na2O was found to raise the fraction of Q3 units in the glasses systematically, in agreement with studies on related glasses, and, as long as the value of x was not too high, contribute to higher rates of dissolution in single pass flow-through testing. The finding was obtained across more than one series of silica-rich glasses prepared for independent dissolution studies. In contrast, dissolution rates were less strongly determined by the Q3 fraction when the value of x was near unity and appeared to grow larger upon further reduction of the Q3 fraction. The results were interpreted to indicate the increasingly important role of network hydrolysis in the glass dissolution mechanism as the BO4 tetrahedron replaces the Q3 unit as the charge-compensating structure for Na+ ions. Finally, the use of deep-UV Raman spectroscopy was found to be advantageous in studying finely powdered glasses in cases where visible Raman spectroscopy suffered from weak Raman scattering and fluorescence interference.

  14. La responsabilité comme mode de gouvernement néolibéral : l’exemple des programmes d’aide aux familles aux États-Unis de 1980 à nos jours

    Directory of Open Access Journals (Sweden)

    Philippe Fournier

    2015-01-01

    Full Text Available Le point de départ de ma proposition est que la responsabilité est un terme plus approprié que la vertu pour désigner les exhortations au devoir civique dans l’ère contemporaine. De même, à défaut de voir l’implication citoyenne comme l’expression de la rationalité individuelle ou de la conscience morale dans la sphère publique, je propose de comprendre la responsabilité comme une matrice discursive et gouvernementale qui perpétue des modèles comportementaux bien spécifiques. J’entends ainsi démontrer que la responsabilité est devenue une modalité indispensable du « gouvernement de la conduite » au sein d’une rationalité néolibérale. En plus de constituer une série de dispositions morales qui remédierait aux failles et aux lacunes de l’individualisme (néolibéral, la responsabilité se matérialise dans les incitations à une citoyenneté active et participe de ce fait à la rationalisation du retranchement de l’État de la sphère sociale. Comme l’illustrent des courants aussi divers que le néoconservatisme, le communautarisme et l’économie sociale, la responsabilité se présente moins comme une solution de rechange aux créneaux du néolibéralisme qu’une série de techniques et de standards comportementaux visant à compléter et renforcer l’application élargie d’une logique micro-économique. Je montrerai que le recours à la notion de responsabilité est particulièrement visible dans les politiques d’aide sociale et au sein des nouveaux partenariats entre l’État, le milieu communautaire et les communautés locales. En effet, l’aide étatique est de plus en plus conditionnelle à la démonstration de certaines dispositions morales et psychologiques comme la volonté, la ténacité et la probité. L’article se divise en quatre parties. La première s’attarde à définir brièvement la « gouvernementalité », concept initialement développé par Michel Foucault. La deuxième se

  15. Borosilicate nuclear waste glass alteration kinetics theoretical basis for the kinetic law of nuclear glass alteration

    International Nuclear Information System (INIS)

    Jegou, Ch.; Gin, St.; Advocat, Th.; Vernaz, E.

    1997-01-01

    Work carried out since the early 1980's to predict the long-term behavior of nuclear containment glasses has revealed the inadequacy of existing models, notably in accounting for the fundamental mechanisms involved in some complex systems (e.g. glass-water-clay), inciting us to examine and discuss the theoretical basis for the hypotheses generally assumed in our models. This paper discusses the theoretical basis for the Aagaard-Helgeson law and its application to nuclear glasses. The contribution of other types of kinetic laws is also considered to describe the alteration kinetics of nuclear glasses. (authors)

  16. Evolution Analysis of the Aux/IAA Gene Family in Plants Shows Dual Origins and Variable Nuclear Localization Signals

    Directory of Open Access Journals (Sweden)

    Wentao Wu

    2017-10-01

    Full Text Available The plant hormone auxin plays pivotal roles in many aspects of plant growth and development. The auxin/indole-3-acetic acid (Aux/IAA gene family encodes short-lived nuclear proteins acting on auxin perception and signaling, but the evolutionary history of this gene family remains to be elucidated. In this study, the Aux/IAA gene family in 17 plant species covering all major lineages of plants is identified and analyzed by using multiple bioinformatics methods. A total of 434 Aux/IAA genes was found among these plant species, and the gene copy number ranges from three (Physcomitrella patens to 63 (Glycine max. The phylogenetic analysis shows that the canonical Aux/IAA proteins can be generally divided into five major clades, and the origin of Aux/IAA proteins could be traced back to the common ancestor of land plants and green algae. Many truncated Aux/IAA proteins were found, and some of these truncated Aux/IAA proteins may be generated from the C-terminal truncation of auxin response factor (ARF proteins. Our results indicate that tandem and segmental duplications play dominant roles for the expansion of the Aux/IAA gene family mainly under purifying selection. The putative nuclear localization signals (NLSs in Aux/IAA proteins are conservative, and two kinds of new primordial bipartite NLSs in P. patens and Selaginella moellendorffii were discovered. Our findings not only give insights into the origin and expansion of the Aux/IAA gene family, but also provide a basis for understanding their functions during the course of evolution.

  17. Evolution Analysis of the Aux/IAA Gene Family in Plants Shows Dual Origins and Variable Nuclear Localization Signals.

    Science.gov (United States)

    Wu, Wentao; Liu, Yaxue; Wang, Yuqian; Li, Huimin; Liu, Jiaxi; Tan, Jiaxin; He, Jiadai; Bai, Jingwen; Ma, Haoli

    2017-10-08

    The plant hormone auxin plays pivotal roles in many aspects of plant growth and development. The auxin/indole-3-acetic acid (Aux/IAA) gene family encodes short-lived nuclear proteins acting on auxin perception and signaling, but the evolutionary history of this gene family remains to be elucidated. In this study, the Aux/IAA gene family in 17 plant species covering all major lineages of plants is identified and analyzed by using multiple bioinformatics methods. A total of 434 Aux/IAA genes was found among these plant species, and the gene copy number ranges from three ( Physcomitrella patens ) to 63 ( Glycine max ). The phylogenetic analysis shows that the canonical Aux/IAA proteins can be generally divided into five major clades, and the origin of Aux/IAA proteins could be traced back to the common ancestor of land plants and green algae. Many truncated Aux/IAA proteins were found, and some of these truncated Aux/IAA proteins may be generated from the C-terminal truncation of auxin response factor (ARF) proteins. Our results indicate that tandem and segmental duplications play dominant roles for the expansion of the Aux/IAA gene family mainly under purifying selection. The putative nuclear localization signals (NLSs) in Aux/IAA proteins are conservative, and two kinds of new primordial bipartite NLSs in P. patens and Selaginella moellendorffii were discovered. Our findings not only give insights into the origin and expansion of the Aux/IAA gene family, but also provide a basis for understanding their functions during the course of evolution.

  18. Application de la gestion intégrale de l'innovation dans les petites et ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    'application d'un cadre de gestion intégrale de l'innovation destiné exclusivement aux PME. Les capacités de recherche et de mise en oeuvre seront améliorées au moyen d'une formation aux cycles supérieurs ou d'une autre nature.

  19. Color centers of a borosilicate glass induced by 10 MeV proton, 1.85 MeV electron and 60Co-γ ray

    Science.gov (United States)

    Du, Jishi; Wu, Jiehua; Zhao, Lili; Song, Lixin

    2013-05-01

    Optical absorption spectra, electron paramagnetic resonance (EPR) spectra, Raman spectra of a borosilicate glass after irradiation by 10 MeV proton, 1.85 MeV electron and 60Co-γ ray were studied. The process of irradiation inducing color centers in the glass was discussed. The band gap of the glass before and after 60Co-γ ray irradiation was studied using Mott and Davis's theory, and it was found that calculated change of the band gap introduced a paradox, because Mott and Davis's theory on the band gap cannot be adopted in the study on the irradiated glass.

  20. Effects of /sup 60/Co gamma radiation damage and heat treatment on the electro-mechanical properties of some related lithium alumino-borosilicate glasses

    Energy Technology Data Exchange (ETDEWEB)

    Abou Sekkina, M.M.; Gohar, I.A.; Megahed, A.A. (Al-Azhar Univ., Tanta (Egypt). Faculty of Science; Cairo Univ., El Mansura (Egypt). Faculty of Science)

    1985-01-01

    Various samples of pure lithium alumino-borosilicate glasses have been prepared and annealed. Data have been taken on the temperature dependence of DC electrical conductivity and the activation energy for conduction was evaluated in each case. Vickers hardness data have also been obtained as a function of tempering temperature and time for all glass compositions. Co-ordinated explanations of the DC conductivity and Vickers hardness induced by ionizing radiation are put forward and the activation energy for the process of carrier liberation are evaluated for the first time.

  1. La largeur de bande pourrait permettre aux universités africaines de ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2 févr. 2011 ... La meilleure politique une recherche en télécommunication dans une ... Toutefois, l'utilisation de HINARI exige un accès Internet fiable et assez .... à la conférence d'Internet2, qui a eu lieu aux États-Unis en septembre, et à ...

  2. Le marche aux fetiches (lantassime) d'Akodessewa a Lome (Togo ...

    African Journals Online (AJOL)

    ) est célèbre par les marchandises qui y sont vendues. Une démarche méthodologique basée sur la recherche documentaire, l'observation et les enquêtes par questionnaires a permis de montrer que le marché aux fétiches occupe des ...

  3. Monitoring the performance of Aux. Feedwater Pump using Smart Sensing Model

    Energy Technology Data Exchange (ETDEWEB)

    No, Young Gyu; Seong, Poong Hyun [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

    2015-10-15

    Many artificial intelligence (AI) techniques equipped with learning systems have recently been proposed to monitor sensors and components in NPPs. Therefore, the objective of this study is the development of an integrity evaluation method for safety critical components such as Aux. feedwater pump, high pressure safety injection (HPSI) pump, etc. using smart sensing models based on AI techniques. In this work, the smart sensing model is developed at first to predict the performance of Aux. feedwater pump by estimating flowrate using group method of data handing (GMDH) method. If the performance prediction is achieved by this feasibility study, the smart sensing model will be applied to development of the integrity evaluation method for safety critical components. Also, the proposed algorithm for the performance prediction is verified by comparison with the simulation data of the MARS code for station blackout (SBO) events. In this study, the smart sensing model for the prediction performance of Aux. feedwater pump has been developed. In order to develop the smart sensing model, the GMDH algorithm is employed. The GMDH algorithm is the way to find a function that can well express a dependent variable from independent variables. This method uses a data structure similar to that of multiple regression models. The proposed GMDH model can accurately predict the performance of Aux.

  4. Monitoring the performance of Aux. Feedwater Pump using Smart Sensing Model

    International Nuclear Information System (INIS)

    No, Young Gyu; Seong, Poong Hyun

    2015-01-01

    Many artificial intelligence (AI) techniques equipped with learning systems have recently been proposed to monitor sensors and components in NPPs. Therefore, the objective of this study is the development of an integrity evaluation method for safety critical components such as Aux. feedwater pump, high pressure safety injection (HPSI) pump, etc. using smart sensing models based on AI techniques. In this work, the smart sensing model is developed at first to predict the performance of Aux. feedwater pump by estimating flowrate using group method of data handing (GMDH) method. If the performance prediction is achieved by this feasibility study, the smart sensing model will be applied to development of the integrity evaluation method for safety critical components. Also, the proposed algorithm for the performance prediction is verified by comparison with the simulation data of the MARS code for station blackout (SBO) events. In this study, the smart sensing model for the prediction performance of Aux. feedwater pump has been developed. In order to develop the smart sensing model, the GMDH algorithm is employed. The GMDH algorithm is the way to find a function that can well express a dependent variable from independent variables. This method uses a data structure similar to that of multiple regression models. The proposed GMDH model can accurately predict the performance of Aux

  5. Élaboration de politiques nationales sur l'accès aux ressources ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Ce projet amènera des équipes de recherche expérimentées en provenance de ... des articles scientifiques, un livre et des documents de formation en anglais et ... Centre international de recherche agricole dans les zones arides ... de coopération scientifique et technologique en appui aux projets de recherche conjoints.

  6. Prévention du crime grâce aux pratiques communautaires au ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Selon les chiffres compilés par la police et l'ombudsman des droits de la personne, ... L'Association internationale de ressources en eau (IWRA), en étroite ... un accord de coopération scientifique et technologique en appui aux projets de ...

  7. Partenariat Canada-Caraïbes sur l'adaptation des collectivités aux ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Mettre en place des réseaux scientifiques et professionnels qui font progresser la ... climatiques en consolidant les structures institutionnelles et de gouvernance. ... ont conclu un accord de coopération scientifique et technologique en appui aux ... de l'Institut d'étude du développement international de l'Université McGill.

  8. De la recherche aux politiques - Établissement de liens entre l ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    La recherche sur les changements climatiques et leurs effets sur les populations vulnérables est assez avancée en Afrique australe. Toutefois, il y a peu de transfert des connaissances des scientifiques aux responsables des politiques. Ce projet vise à faciliter la traduction des résultats de la recherche en politiques de ...

  9. Mettre un terme à la violence faite aux femmes | CRDI - Centre de ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    13 nov. 2012 ... Asia Justice and Rights (AJAR) ... La violence contre les femmes ne se résume pas aux gestes posés. ... Dans une culture admettant la violence à l'endroit des femmes, ce fait est important; ... Indian Institute of Management

  10. Saine diversification des repas servis dans les écoles grâce aux ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Saine diversification des repas servis dans les écoles grâce aux innovations en agriculture. 03 janvier 2018. Wendy-Ann Isaac, Gaius Eudoxie, Patrick Cortbaoui, Wayne Ganpat et Sylvia Borucki. Des élèves qui mangent un repas à l'école. Photo : Arne Hoel / Banque mondiale ...

  11. Vulnérabilité des troupeaux transhumants aux mutations climatiques ...

    African Journals Online (AJOL)

    Vulnérabilité des troupeaux transhumants aux mutations climatiques : analyse des perceptions et adaptations locales dans le bassin de la Sota à Malanville. S Zakari, BAH Tente, I Yabi, IT Imorou, T Tabou, F Afouda, B n'Bessa ...

  12. Prévalence et susceptibilité aux antibiotiques des souches de ...

    African Journals Online (AJOL)

    Cette étude a pour but de déterminer la prévalence et la susceptibilité des souches de Salmonella ... Les résultats des tests de sensibilité aux antibiotiques ont montré que : 92,68% des Salmonella ...... Kariuki S, Holt KE, Gordon MA, Harris.

  13. Le coût du crédit aux entreprises.

    OpenAIRE

    PARMENTIER, P.; THOMAS, J.

    2006-01-01

    La remontée des taux moyens des crédits aux entreprises amorcée au quatrième trimestre 2005 s’est poursuivie entre janvier et avril 2006 pour toutes les catégories de concours autres que l’escompte.

  14. Offrir un choix aux agriculteurs pauvres: Harsha de Silva (Sri Lanka ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    ans de nombreux pays en développement, les téléphones mobiles permettent aux pauvres de profiter des avantages des technologies de l'information et de la communication (TIC). Des travaux de recherche appuyés par le CRDI et dirigés par Learning Initiatives on Reforms for Network Economies (LIRNEasia), ...

  15. Tirer des connaissances de la recherche locale et les utiliser aux ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    gs

    La Carnegie Corporation of New York (CCNY) et le Centre de recherches pour le développement international (CRDI) annoncent le lancement d'une initiative de recherche concertée intitulée Tirer des connaissances de la recherche locale et les utiliser aux fins de la consolidation de la paix et du renforcement de l'État.

  16. Mise en place d'un réseau d'adaptation aux changements ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Ce projet a pour objectif de concevoir un mécanisme de gestion des risques accrus liés aux changements climatiques en appliquant le principe reconnu des ... Adaptation to Climate Change: Stakeholder engagement and understanding impacts - International Council for Local Environment Initiatives (ICLEI) (Section 21).

  17. Etude comparative de la flore aux abords des cours d'eau dans les ...

    African Journals Online (AJOL)

    Etude comparative de la flore aux abords des cours d'eau dans les zones hypo et hyper endémiques d'ulcère de Buruli en Côte d'Ivoire. C. Cisse Boni, E. Ehouman, D. Soro, M.W. Kone, A. Bakayoko, F. Dembele, K. Bauthire, M Dosso ...

  18. Penser aux/les limites de nos limites

    Directory of Open Access Journals (Sweden)

    Jacques Lévy

    2010-12-01

    Full Text Available Le mot « frontière » a beaucoup de succès, dans son sens propre mais plus encore comme métaphore d’une multitude de réalités qui ont à voir avec les limites, c’est-à-dire avec notre propension à découper le monde en objets séparables. Mais on constate une grande indétermination entre concept et métaphore et un usage trop facile de mélanges entre ceux-ci. Il faut donc d’abord admettre que la matérialité n’est qu’une des composantes de notre monde, mais que l’immatériel n’est pas l’irréel, le simulé ou le métaphorique. Après un détour par une théorie des limites et ses limites et une distinction entre le topographique (continu et le topologique (discontinu appliquée à l’intérieur et aux limites d’une aire, deux exemples sont développés qui visent à montrer que, si l’on trouve des frontières, ce n’est pas forcément là où on les attend et que l’appréciation juste de la place des frontières suppose la prise en compte de bien d’autres considérations que la seule limitation volontaire et brutale du franchissement d’une ligne imaginaire tracée au sol.Think about limits and the limits of our limitsThe word “boundary” has been very successful in its literal sense but even more so as a metaphor of a multitude of realities involving limits, that is, with regards to our tendency to divide the world into separable objects. However, one can observe a considerable uncertainty between the concept and the metaphor and an utilisation too easy of various mixtures of them. It becomes necessary therefore to first admit that materiality is only one of the components of our world whilst the immaterial is not unreal, simulated or metaphoric. After a detour consisting of examining a theory of limits and its limits and making the distinction between the topographic (continuous and the topologic (discontinuous applied to the interior and the limits of an area, two examples are developed which aim to

  19. On the Morphology of the SDS Film on the Surface of Borosilicate Glass

    Directory of Open Access Journals (Sweden)

    Zih-Yao Shen

    2017-05-01

    Full Text Available Surfactant films on solid surfaces have attracted much attention because of their scientific interest and applications, such as surface treatment agent, or for micro- or nano-scale templates for microfluidic devices. In this study, anionic surfactant sodium dodecyl sulfate (SDS solutions with various charged inorganic salts was spread on a glass substrate and dried to form an SDS thin film. Atomic force microscopy (AFM was employed to observe the micro-structure of the SDS thin film. The effects of inorganic salts on the morphology of the SDS film were observed and discussed. The results of experiments demonstrated that pure SDS film formed patterns of long, parallel, highly-ordered stripes. The existence of the inorganic salt disturbed the structure of the SDS film due to the interaction between the cationic ion and the anionic head groups of SDS. The divalent ion has greater electrostatic interaction with anionic head groups than that of the monovalent ion, and causes a gross change in the morphology of the SDS film. The height of the SDS bilayer measured was consistent with the theoretical value, and the addition of the large-sized monovalent ion would lead to lowering the height of the adsorbed structures.

  20. Synthesis and Luminescent Characteristics of Ce3+-Activated Borosilicate Blue-Emitting Phosphors for LEDs

    Directory of Open Access Journals (Sweden)

    Hong Yu

    2016-01-01

    Full Text Available The phosphors Sr3B2SiO8:Ce3+ have been successfully synthesized via solid-state reaction process. Emission/excitation spectra and photoluminescence decay behaviors were investigated in detail. Under the excitation of 340 nm, the emission spectrum presented an asymmetry emission band extended from 350 to 600 nm, which with the main peak at 425 nm can be fitted in two peaks (23940 cm−1 and 21934 cm−1. The chromaticity coordinates of Sr3-xB2SiO8:xCe3+ are fixed in the blue region; when the intensity of Ce3+ reached the maximum, the chromaticity coordinate is (0.154, 0.088 which is more close to the standard CIE of blue light (0.140, 0.080. The results showed the kind of phosphor may have potential applications in the fields of UV-excited white LEDs.

  1. Un outil de prise de données sur une image numérisée et son utilité dans les études relatives aux poissons : exemple d'une application concrète en morphométrie

    Directory of Open Access Journals (Sweden)

    SAGNES P.

    1995-04-01

    Full Text Available Une configuration informatique polyvalente en analyse d'images est présentée. L'accent est mis sur une application morphométrique par l'intermédiaire d'un exemple concret chez les poissons, d'où ressortent les principales qualités du dispositif, soit la précision et la rapidité de collecte et de stockage des données. Des applications possibles de cet outil à des domaines d'étude précis sont également suggérées.

  2. Calcium-borosilicate glass-ceramics wasteforms to immobilize rare-earth oxide wastes from pyro-processing

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Miae [Department of Materials Science and Engineering and Division of Advanced Nuclear Engineering, Pohang University of Science and Technology (POSTECH), Pohang, Gyeongbuk, 790-784 (Korea, Republic of); Heo, Jong, E-mail: jheo@postech.ac.kr [Department of Materials Science and Engineering and Division of Advanced Nuclear Engineering, Pohang University of Science and Technology (POSTECH), Pohang, Gyeongbuk, 790-784 (Korea, Republic of); Department of Materials Engineering, Adama Science and Technology University (ASTU), PO Box 1888, Adama (Ethiopia)

    2015-12-15

    Glass-ceramics containing calcium neodymium(cerium) oxide silicate [Ca{sub 2}Nd{sub 8-x}Ce{sub x}(SiO{sub 4}){sub 6}O{sub 2}] crystals were fabricated for the immobilization of radioactive wastes that contain large portions of rare-earth ions. Controlled crystallization of alkali borosilicate glasses by heating at T ≥ 750 °C for 3 h formed hexagonal Ca–silicate crystals. Maximum lanthanide oxide waste loading was >26.8 wt.%. Ce and Nd ions were highly partitioned inside Ca–silicate crystals compared to the glass matrix; the rare-earth wastes are efficiently immobilized inside the crystalline phases. The concentrations of Ce and Nd ions released in a material characterization center-type 1 test were below the detection limit (0.1 ppb) of inductively coupled plasma mass spectroscopy. Normalized release values performed by a product consistency test were 2.64·10{sup −6} g m{sup −2} for Ce ion and 2.19·10{sup −6} g m{sup −2} for Nd ion. Results suggest that glass-ceramics containing calcium neodymium(cerium) silicate crystals are good candidate wasteforms for immobilization of lanthanide wastes generated by pyro-processing. - Highlights: • Glass-ceramic wasteforms containing Ca{sub 2}Nd{sub 8-x}Ce{sub x}(SiO{sub 4}){sub 6}O{sub 2} crystals were synthesized to immobilize lanthanide wastes. • Maximum lanthanide oxide waste loading was >26.8 wt.%. • Ce and Nd ions were highly partitioned inside Ca–Nd–silicate crystals compared to glass matrix. • Amounts of Ce and Nd ions released in the material characterization center-type 1 were below the detection limit (0.1 ppb). • Normalized release values performed by a PCT were 2.64• 10{sup −6} g m{sup −2} for Ce ions and 2.19• 10{sup −6} g m{sup −2} for Nd ions.

  3. The effects of sulfate content on crystalline phase, microstructure, and chemical durability of zirconolite−barium borosilicate glass-ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Lang, E-mail: lang.wu@163.com [State Key Laboratory Cultivation Base for Nonmetal Composites and Functional Materials, Southwest University of Science and Technology, Mianyang 621010 (China); Wang, Xin; Li, Huidong; Teng, Yuancheng [State Key Laboratory Cultivation Base for Nonmetal Composites and Functional Materials, Southwest University of Science and Technology, Mianyang 621010 (China); Peng, Long [Sichuan Province Key Laboratory of Information Materials and Devices Application, Chengdu University of Information Technology, Chengdu 610225 (China)

    2016-09-15

    The effects of sulfate content on structure and chemical durability of barium borosilicate glass-ceramics were studied. The results show that the glass-ceramics with 0–1.10 mol% SO{sub 3} possess mainly CaZrTi{sub 2}O{sub 7}-2M phase along with a small amount of CaZrTi{sub 2}O{sub 7}-3T and ZrO{sub 2} phases. The hexagonal CaZrTi{sub 2}O{sub 7}-3T crystals crystallize on the surface of glass-ceramics. For the samples with 1.24–1.55 mol% SO{sub 3}, the main crystalline phases are CaTiSiO{sub 5} and CaZrTi{sub 2}O{sub 7}-2M in the bulk, while a separate sulfate layer containing Na{sub 2}SO{sub 4} and BaSO{sub 4} is observed on the surface. X-ray fluorescence analysis indicates that about 2/3 of the SO{sub 3} originally added has been lost by volatility. The normalized mass loss (NL{sub i}) for Na, B, Ca elements remains almost unchanged (∼10{sup −2} g/m{sup 2}) after 7 days for the samples with 0–1.10 mol% SO{sub 3}. The NL{sub i} for both Na and B increases gradually after 7 days when the SO{sub 3} content is 1.24 mol%. - Highlights: • Strip-shaped CaZrTi{sub 2}O{sub 7}-2M and plate-like CaTiSiO{sub 5} crystals crystallize in the bulk. • CaZrTi{sub 2}O{sub 7}-3T crystals crystallize on the surface for samples with 0–1.10 mol% SO{sub 3}. • A separate sulfate layer crystallizes on the surface when SO{sub 3} exceeds solubility.

  4. Study of phase separation and crystallization phenomena in soda-lime borosilicate glass enriched in MoO3

    International Nuclear Information System (INIS)

    Magnin, M.

    2009-09-01

    Molybdenum oxide immobilization (MoO 3 , as fission product) is one of the major challenges in the nuclear glass formulation issues for high level waste solutions conditioning since many years, these solutions arising from spent nuclear fuel reprocessing. Phase separation and crystallisation processes may arise in molten glass when the MoO 3 content is higher than its solubility limit that may depend on glass composition. Molybdenum combined with other elements such as alkali and alkaline-earth may form crystalline molybdates, known as 'yellow phases' in nuclear glasses which may decrease the glass durability. In order to confine high level wastes (HLW) such as the fission product solutions arising from the reprocessing of high burn-up UOX-type nuclear spent fuels, a new glass composition (HLW glass) is being optimized. This work is devoted to the study of the origin and the mechanism of phase separation and crystallization phenomena induced by molybdenum oxide incorporation in the HLW glass. From microstructural and structural point of view, the molybdenum oxide behavior was studied in glass compositions belonging to the SiO 2 -B 2 O 3 - Na 2 O-CaO simplified system which constituted basis for the HLW glass formulation. The structural role of molybdenum oxide in borosilicate network explaining the phase separation and crystallization tendency was studied through the coupling of structural ( 95 Mo, 29 Si, 11 B, 23 Na MAS NMR, XRD) and microstructural (SEM, HRTEM) analysis techniques. The determination of phase separation (critical temperature) and crystallization (liquidus temperature) appearance temperatures by in situ viscosimetry and Raman spectroscopy experiments allowed us to propose a transformation scenario during melt cooling. These processes and the nature of the crystalline phases formed (CaMoO 4 , Na 2 MoO 4 ) that depend on the evolution of MoO 3 , CaO and B 2 O 3 contents were correlated with changes of sodium and calcium cations proportions in the

  5. The structure of phosphate and borosilicate glasses and their structural evolution at high temperatures as studied with solid state NMR spectroscopy: Phase separation, crystallisation and dynamic species exchange

    International Nuclear Information System (INIS)

    Wegner, S.; Van Wullen, L.; Tricot, G.; Tricot, G.

    2010-01-01

    In this contribution we present an in-depth study of the network structure of different phosphate based and borosilicate glasses and its evolution at high temperatures. Employing a range of advanced solid state NMR methodologies, complemented by the results of XPS, the structural motifs on short and intermediate length scales are identified. For the phosphate based glasses, at temperatures above the glass transition temperature Tg, structural relaxation processes and the devitrification of the glasses were monitored in situ employing MAS NMR spectroscopy and X-ray diffraction. Dynamic species exchange involving rapid P-O-P and P-O-Al bond breaking and reforming was observed employing in situ 27 Al and 31 P MAS NMR spectroscopy and could be linked to viscous flow. For the borosilicate glasses, an atomic scale investigation of the phase separation processes was possible in a combined effort of ex situ NMR studies on glass samples with different thermal histories and in situ NMR studies using high temperature MAS NMR spectroscopy including 11 B MAS, 29 Si MAS and in situ 29 Si{ 11 B} REAPDOR NMR spectroscopy. (authors)

  6. Coordination Environments of Highly Charged Cations (Ti, Cr, and Light REE's) in Borosilicate Glass/Melts to 1120C

    Energy Technology Data Exchange (ETDEWEB)

    Farges, Francois; /Museum Natl. Hist. Natur. /Stanford U., Geo. Environ. Sci.; Brown, Gordon E., Jr.; /Stanford U., Geo. Environ Sci. /SLAC, SSRL

    2007-01-02

    The local environments around Ti, Cr, and several light rare-earth elements (La, Ce, and Nd) were investigated by in-situ XANES spectroscopy in a number of complex borosilicate glasses and melts (to 1120 C) that are used for nuclear waste storage. Examination of the high-resolution XANES spectra at the Ti K-edge shows that the average coordination of Ti changes from {approx}5 to {approx}4.5. Cr is dominantly trivalent in the melts studied. However, its average coordination is probably lower in the melt (tetrahedral ?) as revealed by the more intense Cr-K pre-edge feature. Ce also changes its average valence from dominantly +4 to +3.5 upon glass melting. These changes are reversible at T{sub g}, the glass transition temperature ({approx}500-550 C for these glasses). In contrast, the local environments of Nd, Pr, and La are unaffected by melting. Therefore, structural reorganization of these borosilicate glass/melts above T{sub g} is variable, not only in terms of valence (as for Ce) but also speciation (Ti and Cr). Both the ability of B to adopt various coordination geometries (triangular and tetrahedral) and the chemical complexity of the glass/melts explain these changes.

  7. Adaptation aux changements climatiques en ce qui concerne l ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2012-01-31

    First [1st] Country†Wise Inception Workshop of Stakeholders †Sudan, January 31, 2012, Sharija Conference Hall, Khartoum, Sudan. Download PDF. Journal articles. Maize cultivar specific parameters for decision support system for agrotechnology transfer (DSSAT) application in Tanzania. Download PDF. Studies.

  8. Handling Uncertainty in Accessing Petroleum Exploration Data Traitement de l'incertain dans l'accès aux données d'exploration pétrolière

    Directory of Open Access Journals (Sweden)

    Chung P. W. H.

    2006-11-01

    Full Text Available This paper discusses the role of uncertainty in accessing petroleum exploration databases. Two distinct forms of uncertainty are identified : the uncertainty in the user's requirements, and the uncertainty in the data held. A general mechanism is described which is applicable to both. Cet article traite du rôle de l'incertitude dans l'accès aux bases de données d'exploration pétrolière. Deux sortes distinctes d'incertitudes sont identifiées : l'incertitude au niveau des requêtes de l'utilisateur et l'incertitude attachée aux données stockées. Nous décrivons un mécanisme général qui s'applique à ces deux types d'incertitude.

  9. First-principles study of the structural and elastic properties of AuxV1-x and AuxNb1-x alloys

    Science.gov (United States)

    Al-Zoubi, N.

    2018-04-01

    Ab initio total energy calculations, based on the Exact Muffin-Tin Orbitals (EMTO) method in combination with the coherent potential approximation (CPA), are used to calculate the total energy of AuxV1-x and AuxNb1-x random alloys along the Bain path that connects the body-centred cubic (bcc) and face-centred cubic (fcc) structures as a function of composition x (0 ≤ x ≤ 1). The equilibrium Wigner-Seitz radius and the elastic properties of both systems are determined as a function of composition. Our theoretical prediction in case of pure elements (x = 0 or x = 1) are in good agreement with the available experimental data. For the Au-V system, the equilibrium Wigner-Seitz radius increase as x increases, while for the Au-Nb system, the equilibrium Wigner-Seitz radius is almost constant. The bulk modulus B and C44 for both alloys exhibit nearly parabolic trend. On the other hand, the tetragonal shear elastic constant C‧ decreases as x increases and correlates reasonably well with the structural energy difference between fcc and bcc structures. Our results offer a consistent starting point for further theoretical and experimental studies of the elastic and micromechanical properties of Au-V and Au-Nb systems.

  10. La dévotion aux âmes du purgatoire à Rio de Janeiro

    OpenAIRE

    Augras, Monique

    2009-01-01

    La dévotion aux âmes du purgatoire est particulièrement vive à Rio de Janeiro. A peu près tolérée par l’Église catholique, elle réunit, chaque lundi, un nombre assez considérable de personnes qui viennent prier, allumer un cierge et déposer diverses offrandes afin de se ménager l’appui des « âmes » pour résoudre les problèmes les plus pressants. A la différence des saints du paradis, dont les vertus les éloignent peut-être du commun des gens, la dévotion aux âmes semble s’appuyer sur une nett...

  11. Le Carnaval de Schignano : un dernier salut aux émigrants

    Directory of Open Access Journals (Sweden)

    Cristina Del Biaggio

    2011-05-01

    Full Text Available Pour arriver à Schignano, il faut passer par una cürva al giazz e una cürva al suu [Un virage dans la glace et un virage au soleil], comme disent les mots en dialecte d’une récente chanson écrite par Davide Van De Sfroos, compositeur-interprète de la région. C’est dans ce petit hameau de la Vallée d’Intelvi, au-dessus du Lac de Côme, que, tous les ans, le carnaval anime le village. Une fête populaire spontanée, sans règles écrites, ni lois, qui survit grâce aux habitants qui l’animent, aux ar...

  12. L’évaluation de la police de proximité aux Pays-Bas

    OpenAIRE

    van der Vijver, Kees; Zoomer, Olga

    2003-01-01

    Cet article se propose de rendre compte des recherches effectuées en matière de police de proximité aux Pays-Bas. Avant d’aborder le problème de l’impact d’une stratégie de police de proximité, il décrit l’organisation du système policier hollandais sans la compréhension duquel il est difficile de suivre les évolutions qui se sont déroulées durant les dernières décennies jusqu’aux réformes en cours aujourd’hui. À partir des recherches déjà effectuées, il examine les résultats des différentes ...

  13. L’orthographe : des systèmes aux usages

    OpenAIRE

    Fayol, Michel; Jaffré, Jean-Pierre

    2016-01-01

    Ce texte propose un éclairage à la fois linguistique et psycholinguistique sur l’orthographe. Au-delà de la spécificité inhérente, par définition, aux deux domaines, il illustre la complémentarité épistémologique qui s’est développée entre eux au cours des dernières décennies. La psycholinguistique a très souvent fait appel aux descriptions linguistiques pour élaborer ses hypothèses de travail et, de son côté, la linguistique s’est inspirée à maintes reprises des observations psycholinguistiq...

  14. L'accès aux collections physiques de la Bpi

    OpenAIRE

    Etesse, Cécile

    2014-01-01

    L'objectif de l’étude est d'analyser l’accès des usagers aux collections physiques de la Bpi. La méthodologierepose sur des entretiens semi-directifs - une quarantaine réalisés auprès d’usagers en situation de recherche dans la bibliothèque, dans les rayons ou aux bureaux d’information et sur un benchmarking auprès d’une dizaine de bibliothèques - portant sur leurs pratiques en matière de supports d’information, signalétique, mise en espace des collections et choix de classification.Les princ...

  15. Systèmes locaux d'alerte précoce et de réponse aux urgences ...

    African Journals Online (AJOL)

    SARAH

    30 janv. 2015 ... initiative which contributes in improving the performance of the early warning system and response to .... types de structures locales demeurent une action qui va ... un appui accru aux organisations non gouvernementales.

  16. Solutions de remplacement à la culture du tabac et aux activités ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Solutions de remplacement à la culture du tabac et aux activités connexes (Inde) ... L'Inde fait toutefois partie du groupe de travail sur les activités de remplacement de la culture du tabac économiquement viables de l'Organisation mondiale de la santé (OMS) et dispose de ... India, Central Asia, Far East Asia, South Asia ...

  17. Gestion de la biodiversité agricole aux fins de la nutrition, de la ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Gestion de la biodiversité agricole aux fins de la nutrition, de la santé, des moyens de subsistance et des systèmes de production durable (Afrique). Les qualités nutritionnelles des aliments provenant des systèmes de production alimentaire de l'Afrique se dégradent, comme l'indiquent la prévalence accrue de carences en ...

  18. Decommissioning of the Nuclear Licensed Facilities at the Fontenay aux Roses CEA Center

    International Nuclear Information System (INIS)

    Jeanjacques, Michel; Piketty, Laurence; Mandard, Lionel; Pedron, Guy; Boissonneau, Jean Francois; Fouquereau, Alain; Pichereau, Eric; Lethuaire, Nathalie; Estivie, David; Binet, Cedric; Meden, Igor

    2008-01-01

    This is a summary of the program for the decommissioning of all the CEA's facilities in Fontenay aux Roses. The particularity of this center is that it is located in a built-up area. Taking into account the particularities of the various buildings and the levels of radioactivity in them, it was possible to devise a coherent, optimized program for the CEA-FAR licensed nuclear facility decommissioning operations

  19. Adaptation aux changements climatiques au Malawi grâce à l ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    28 avr. 2016 ... Depuis 2001, le programme Écosystèmes et santé humaine du CRDI finance au Malawi des recherches centrées sur les liens entre la fertilité des sols, ... L'équipe examine la façon dont la recherche participative peut guider l'élaboration de stratégies d'adaptation aux changements climatiques, dans un ...

  20. Accès aux TIC et leur utilisation en enseignement supérieur en ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Les politiques dans le domaine de l'enseignement supérieur en matière de technologies de l'information et de la communication (TIC) présument qu'un accès accru aux TIC encourage leur utilisation. Une première collecte de données effectuée en 2004 et 2007 fournit une base des plus nécessaires sur laquelle fonder la ...

  1. Renforcement de la capacité d'adaptation aux changements ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Ce projet vise à améliorer les mesures incitatives et les possibilités qui s'offrent aux ménages du sud de la Zambie et du sud-ouest du Zimbabwe pour composer avec les changements climatiques. Pour ce faire, les responsables investiront dans des technologies de production améliorées d'une grande valeur pratique ...

  2. TIC pour un accès équitable aux ressources humaines en sante en ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Ce projet vise à mieux comprendre comment les TIC peuvent faciliter la distribution équitable des ressources humaines en santé en renforçant et consolidant des activités ... Technologies de l'Information et de la Communication (TIC) pour un Accès équitable aux Ressources Humaines en santé qualifiées, motivées et bien ...

  3. Moyens que prennent les collectivités pour faire face aux souvenirs ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Moyens que prennent les collectivités pour faire face aux souvenirs traumatiques - enseignements tirés d'Aceh et du Timor-Leste. La province d'Aceh et l'État maintenant indépendant du Timor-Leste (auparavant le Timor oriental) ont vécu des décennies de conflit et des violations massives des droits de la personne sous la ...

  4. Réduire les risques et les pertes attribuables aux changements ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    22 août 2014 ... Entre-temps, dans les pays plus riches, comme le Japon et les États‑Unis, les bâtiments et l'infrastructure font l'objet de nouvelles conceptions visant à prévenir les conséquences des tremblements de terre. Quelle comparaison feriez‑vous entre les plans d'adaptation aux tremblements de terre et les ...

  5. Communiquer les risques associés au climat aux collectivités ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    13 mai 2015 ... Le Vietnam est particulièrement vulnérable aux changements climatiques et à la hausse du niveau des océans qui en découle, puisqu'une partie importante de sa population vit dans les basses terres des deltas et le long de la côte, des zones à haut risque. En 2011, d'importantes inondations ont ...

  6. Un partenariat pour lutter contre la résistance aux antimicrobiens ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    11 avr. 2018 ... Le CRDI et le Global AMR Innovation Fund du Royaume-Uni, qui sera géré par le Department of Health and Social Care (DHSC) du Royaume-Uni, rentre dans un nouveau partenariat pour une nouvelle initiative dont l'objectif est de réduire les risques émergents que pose la résistance aux antimicrobiens ...

  7. L’évaluation de la police de proximité aux Pays-Bas

    NARCIS (Netherlands)

    van der Vijver, Kees; Zoomer, Olga

    2003-01-01

    Cet article se propose de rendre compte des recherches effectuées en matière de police de proximité aux Pays-Bas. Avant d’aborder le problème de l’impact d’une stratégie de police de proximité, il décrit l’organisation du système policier hollandais sans la compréhension duquel il est difficile de

  8. Original Paper Les risques sanitaires liés aux sources d'eau de ...

    African Journals Online (AJOL)

    L'eau est une ressource naturelle precieuse et essentielle pour de multiples usages, mais sa qualité est confrontée à plusieurs problèmes dont la pollution liées aux actvités anthropiques, d'où la nécessité de contribuer à l'amélioration de la qualité de l'eau de consommation. Ainsi, une étude transversale, descriptive et.

  9. Amélioration de la sécurité alimentaire et nutritionnelle aux ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Les écoles offrent des voies stratégiques et ciblées pour fournir une alimentation nutritive aux enfants et, indirectement, à leurs familles et leurs collectivités. Un projet de recherche d'une durée de trois ans (de 2012 à 2015) a mis au point et à l'essai un modèle de nutrition intégrée en milieu scolaire comprenant du ...

  10. Renforcement des droits fonciers communautaires et réactions aux ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    De telles menaces qui planent sur les droits fonciers et environnementaux des collectivités sont un indice de tensions plus grandes au sein de l'appareil d'État et du système de justice. Dans ce ... Des droits internationaux aux pratiques locales : la réforme constitutionnelle et la participation en Amérique latine. Ce projet ...

  11. La vulnérabilité aux changements climatiques, une expérience ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    21 avr. 2011 ... Madagascar, la quatrième plus grande île au monde, héberge une multitude de formes de vie qu'on ne trouve nulle part ailleurs sur la planète. Dans la plupart des cas, cette biodiversité est extrêmement vulnérable aux changements climatiques, tout comme l'agriculture pluviale, la pêche et la foresterie, ...

  12. Decommissioning of the nuclear licensed facilities at the Fontenay aux Roses CEA center

    International Nuclear Information System (INIS)

    Jeanjacques, Michel; Piketty, Laurence; Letuhaire, Nathalie; Mandard, Lionel; Meden, Igor; Estivie, David; Boissonneau, Jean Francois; Fouquereau, Alain; Pichereau, Eric; Binet, Cedric

    2007-01-01

    Available in abstract form only. Full text of publication follows: The French Atomic Energy Commission (CEA) center at Fontenay aux Roses (CEN-FAR) is the Commission's oldest center is located in the southern suburbs of Paris. It was opened on 26 March 1946 to host the first French nuclear reactor ZOE that went critical on 12 December 1946. The first laboratories were installed in existing buildings on the site. (authors)

  13. Report of transparency and nuclear safety 2007 CEA Fontenay aux Roses

    International Nuclear Information System (INIS)

    2007-01-01

    This report presents the activities of the CEA Center of Fontenay aux roses for the year 2007. After many years of decommissioning and dismantling of nuclear installations, the Center is now devoted (since 2005) to the development of research programmes on biology and biomedical technologies. The actions concerning the safety, the radiation protection, the significant events, the release control and the environmental impacts and the wastes stored on the center are discussed. (A.L.B.)

  14. Des bananes plus nutritives et qui résistent aux maladies | CRDI ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    28 oct. 2010 ... Les petits agriculteurs jouissent de meilleurs revenus et d'une sécurité alimentaire accrue grâce à des variétés de bananes à haut rendement qui résistent aux maladies. Au cours des années 1980 et 1990, avec le soutien du CRDI, la Fundación Hondureña de Investigación Agricola (FHIA) a mis au point ...

  15. Impact de la restructuration de la taxe d'accise sur le tabac aux ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Aux Philippines, le taux de tabagisme est élevé et les taxes sur les produits du tabac, peu élevées. La meilleure façon de redresser la situation consiste à adopter des lois qui aug- mentent considérablement les taxes. Une loi restructurant les taxes sur les produits du tabac, qui comporte une forte hausse de la taxe d'accise ...

  16. À la suite de la parution d'un rapport sur les subventions aux ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    7 juin 2016 ... A Senegalese boy standing behind a car tire. Scott Wallace / The World Bank. John Cockburn. La protection sociale par le truchement de transferts en espèces peut-elle aider le Ghana à réduire l'écart grandissant que ses subventions aux carburants ont contribué à créer entre les riches et les pauvres ?

  17. Étude sur l'escalade de la violence faite aux femmes en Amérique ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Étude sur l'escalade de la violence faite aux femmes en Amérique centrale. 21 juin 2016. Ana Carcedo. En Amérique centrale, on assiste à une escalade de la violence faite aux femmes et du nombre de meurtres de femmes (ou femicides). Or, il y a des lacunes sur le plan du signalement. Primo, malgré les efforts déployés ...

  18. Amélioration de l'accès à la justice et aux services essentiels dans ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Plus de la moitié des résidents de Nairobi, au Kenya, occupent des établissements spontanés, ou bidonvilles, dans des conditions difficiles. Leurs logements sont inadéquats et ils ont un accès insuffisant à l'eau potable, aux services d'assainissement, aux services de santé, à l'école et à d'autres services publics essentiels ...

  19. Ne réduisez pas les programmes destinés aux femmes. Intégrez-les ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    27 juil. 2017 ... Au cours des derniers mois, nous avons entendu dire que l'administration Trump a prévu de réduire le financement de plusieurs programmes s'adressant aux femmes, comme le Bureau des affaires mondiales relatives aux femmes du département d'État. Ce n'est pas le seul programme. Une évaluation ...

  20. The aux1 gene of the Ri plasmid is sufficient to confer auxin autotrophy in tobacco BY-2 cells.

    Science.gov (United States)

    Nemoto, Keiichirou; Hara, Masamitsu; Goto, Shingo; Kasai, Kouji; Seki, Hikaru; Suzuki, Masashi; Oka, Atsuhiro; Muranaka, Toshiya; Mano, Yoshihiro

    2009-05-01

    Tobacco (Nicotiana tabacum) Bright Yellow-2 (BY-2) cells are rapidly proliferating meristematic cells that require auxin for culture in vitro. We have established several transgenic BY-2 cell lines that carry the T-DNA of Agrobacterium rhizogenes 15834, which harbors an agropine-type root-inducing (Ri) plasmid. Two of these lines, BYHR-3 and BYHR-7, were used to test the role of auxin in the proliferation of plant cells. The lines grew rapidly in Linsmaier-Skoog (LS) medium lacking auxin and other phytohormones. The TR-DNA, containing the aux1 (tryptophan monooxygenase) and aux2 (indoleacetamide hydrolase) genes, was present in the genomes of both transgenic lines, whereas the TL-DNA, containing the rolA, B, C and D genes, was present in the genome of BYHR-7 but not BYHR-3. Since the introduction of the rolABCD genes alone did not affect the auxin requirement of BY-2 cells, the aux1 and aux2 genes, but not the rolABCD genes, appear to be relevant to the auxin autotrophy of these transgenic lines. Furthermore, the overexpression of aux1 allowed BY-2 cells to grow rapidly in the absence of auxin, suggesting the existence in plant cells of an unidentified gene whose product is functionally equivalent or similar to that of aux2 of the Ri plasmid.

  1. Introduction aux lasers et à l'optique quantique

    CERN Document Server

    Grynberg, Gilbert; Fabre, Claude

    1997-01-01

    La plupart des ouvrages qui paraissent sur les lasers se divisent en deux catégories : d'une part, ceux qui traitent en détail de la description quantique des interactions matière-rayonnement ; d'autre part, ceux qui insistent sur telle ou telle caractéristique des sources laser et sur les problèmes nouveaux qu'elles permettent d'aborder, comme l'optique non-linéaire, la fusion inertielle ou le transfert d'information. Gilbert Grynberg, Alain Aspect et Claude Fabre ont fait le pari qu'il était possible de combiner ces deux points de vue dans un même ouvrage et de présenter à leurs lecteurs, à la fois les concepts quantiques de base qui permettent de comprendre l'absorption et l'émission de lumière par les atomes, et les principes de fonctionnement des lasers, leurs caractéristiques essentielles et quelques exemples importants d'applications concrètes. Ils ont, je crois, magnifiquement tenu leur pari.

  2. Fictitious domain methods for elliptic problems with general boundary conditions with an application to the numerical simulation of two phase flows; Methodes de domaine fictif pour des problemes elliptiques avec conditions aux limites generales en vue de la simulation numerique d'ecoulements diphasiques

    Energy Technology Data Exchange (ETDEWEB)

    Ramiere, I

    2006-09-15

    This work is dedicated to the introduction of two original fictitious domain methods for the resolution of elliptic problems (mainly convection-diffusion problems) with general and eventually mixed boundary conditions: Dirichlet, Robin or Neumann. The originality lies in the approximation of the immersed boundary by an approximate interface derived from the fictitious domain Cartesian mesh, which is generally not boundary-fitted to the physical domain. The same generic numerical scheme is used to impose the embedded boundary conditions. Hence, these methods require neither a surface mesh of the immersed boundary nor the local modification of the numerical scheme. We study two modelling of the immersed boundary. In the first one, called spread interface, the approximate immersed boundary is the union of the cells crossed by the physical immersed boundary. In the second one, called thin interface, the approximate immersed boundary lies on sides of mesh cells. Additional algebraic transmission conditions linking both flux and solution jumps through the thin approximate interface are introduced. The fictitious problem to solve as well as the treatment of the embedded boundary conditions are detailed for the two methods. A Q1 finite element scheme is implemented for the numerical validation of the spread interface approach while a new cell-centered finite volume scheme is derived for the thin interface approach with immersed jumps. Each method is then combined to multilevel local mesh refinement algorithms (with solution or flux residual) to increase the precision of the solution in the vicinity of the immersed interface. A convergence analysis of a Q1 finite element method with non-boundary fitted meshes is also presented. This study proves the convergence rates of the present methods. Among the various industrial applications, the simulation on a model of heat exchanger in french nuclear power plants enables us to appreciate the performances of the fictitious domain

  3. Color centers of a borosilicate glass induced by 10 MeV proton, 1.85 MeV electron and 60Co-γ ray

    International Nuclear Information System (INIS)

    Du, Jishi; Wu, Jiehua; Zhao, Lili; Song, Lixin

    2013-01-01

    Optical absorption spectra, electron paramagnetic resonance (EPR) spectra, Raman spectra of a borosilicate glass after irradiation by 10 MeV proton, 1.85 MeV electron and 60 Co-γ ray were studied. The process of irradiation inducing color centers in the glass was discussed. The band gap of the glass before and after 60 Co-γ ray irradiation was studied using Mott and Davis's theory, and it was found that calculated change of the band gap introduced a paradox, because Mott and Davis's theory on the band gap cannot be adopted in the study on the irradiated glass. - Highlights: ► All the three types of irradiation induce the same types of color centers. ► Calculated change of the band gap introduced a paradox. ► Mott and Davis's theory on band gap cannot be adopted in the irradiated glass

  4. Kinetic Rate Law Parameter Measurements on a Borosilicate Waste Glass: Effect of Temperature, pH, and Solution Composition on Alkali Ion Exchange

    International Nuclear Information System (INIS)

    Pierce, Eric M.; McGrail, B PETER.; Icenhower, J P.; Rodriguez, Elsa A.; Steele, Jackie L.; Baum, Steven R.

    2004-01-01

    The reaction kinetics of glass is controlled by matrix dissolution and ion exchange (IEX). Dissolution of an alkali-rich simulated borosilicate waste glass was investigated using single-pass flow-through (SPFT) experiments. Experiments were conducted as a function of temperature, pH, and solution composition by varying the SiO 2 (aq) activity in the influent solution. Results showed that under dilute conditions matrix dissolution increased with increasing pH and temperature, and decreased with increasing SiO 2 (aq) activity. IEX rates decreased with increasing pH and temperature, and increased with increasing SiO 2 (aq) activity. Over the solution composition range interrogated in this study the dominant dissolution mechanism changed from matrix dissolution to IEX. These results suggest that ''secondary'' reactions may become dominant under certain environmental conditions and emphasize the need to incorporate these reactions into dissolution rate models

  5. Elaboration and experimental study of the Borosilicate glass GP 98/12 for the vitrification of the radioactive wastes of KfKarlsruhe Centre (R.F.A.)

    International Nuclear Information System (INIS)

    Ghezal, A.

    1987-09-01

    The transformation into a vitrified block of highly radioactive liquid wastes is actually the best solution for the storage in long run. In West Germany, the research institute in the field of nuclear energy (KfK) has been oriented in this way by developing industrial processes of vitrification and by following studies on the behaviour of the final products. For the fission products, the chosen glasses present good stability characteristics and are used as a first barrier during confinement. Our work, which is part of the research program on radioactive waste vitrification, consists of preparing borosilicate glass GP 98/12 and studying physical and chemical characteristics. We have also contributed to the development and the realization of glass blocks sampling system prepared at pilot scale

  6. Characterization of the deviation of the ideality of concentrated electrolytic solutions: plutonium 4 and uranium 4 nitrate salts study; Contribution a la caracterisation de l'ecart a l'idealite des solutions concentrees d'electrolytes: application aux cas de nitrates de plutonium (4) et d'uranium (4)

    Energy Technology Data Exchange (ETDEWEB)

    Charrin, N

    2000-07-01

    the experimental acquisition of binary data for plutonium(IV) and uranium(IV) nitrates, emphasizing the importance of preparing the mixtures studied: their atypical characteristics - very high actinide concentrations and low acidity - make them unique in the literature. Coupling the water activity measurements with density measurements provides a means of describing the physicochemical properties of fictive Pu(NO{sub 3}){sub 4} and U(NO{sub 3}){sub 4} binary solutions, which are then compared with those of thorium(IV) nitrate. The final chapter describes the application of the binary data. The characteristic parameters of Pu(NO{sub 3}){sub 4} and U(NO{sub 3}){sub 4} used in Pitzer's model and in specific interaction theory are evaluated. The simple solution concept is then applied to density calculations for quaternary Pu(NO{sub 3}){sub 4}/U(NO{sub 3}){sub 4}/HNO{sub 3}/H{sub 2}O mixtures, demonstrating that the density can be predicted with very high precision. (author)

  7. Développement d'immunoessais associés aux électrodes sérigraphiées: des particules superparamagnétiques aux nanobodies

    OpenAIRE

    Patris, Stéphanie

    2014-01-01

    Cette thèse a pour vocation de contribuer au développement de différents immunocapteurs ampérométriques associés aux électrodes sérigraphiées (SPE). Les immunocapteurs sont des dispositifs simples associant un anticorps ou un antigène qui assurent la sélectivité à un transducteur (ici une SPE) ;ce dernier transforme la liaison anticorps/antigène en un signal mesurable (ici ampérométrique).Le travail est divisé en deux volets principaux.Le premier est consacré à la mise en œuvre de différents ...

  8. Développement d'immunoessais associés aux électrodes sérigraphies: des particules superparamagnétiques aux nanobodies

    OpenAIRE

    Patris, Stéphanie

    2014-01-01

    Cette thèse a pour vocation de contribuer au développement de différents immunocapteurs ampérométriques associés aux électrodes sérigraphiées (SPE). Les immunocapteurs sont des dispositifs simples associant un anticorps ou un antigène qui assurent la sélectivité à un transducteur (ici une SPE) ;ce dernier transforme la liaison anticorps/antigène en un signal mesurable (ici ampérométrique). Le travail est divisé en deux volets principaux. Le premier est consacré à la mise en œuvre de dif...

  9. Loi constitutive chimioplastique pour le beton expose aux hautes temperatures

    Science.gov (United States)

    Hammoud, Rabah

    degradation of exothermic origin. This experimental program puts emphasis on the fragile nature of the preheated concrete and demonstrates the non-applicability of two failure criteria often used in engineering calculation. An alternative is proposed and well-tested. Indeed, exposing the concrete to high temperature results in irreversible loss of stiffness as well as a loss of decohesion strength. These losses are, typically, expressed through semi-empirical relationships of the mechanical properties with temperature. Unfortunately, these relationships are inadequate because the direct impact of this degradation, on the macroscopic scale, can result in a dependency relationship between the elastic properties and the hydrates mass. Therefore, unlike traditional methods using conventional elasto-plastic models and adjusting certain parameters with local temperature, the proposed constitutive law that incorporates a function of dehydration similar to the softening index in chemo-plastics gives good results. An Etse and Willam similar criterion is used and modified for the occasion. Hardening and softening mechanisms are then needed to expand and contract the loading surface for defining the strength of the concrete on a wide range of dehydration processes. The direction and magnitude of a permanent deformation, core of the inelastic domain, are defined through the development of non-associated chemoplastic potential and new curve of ductility. The influence of hydrostatic pressure (dilatancy) and dehydration on the concrete behavior are taken into account in our model. The model is implemented in the Matlab(c) code. Strains and stresses generated in the concrete are now accurately predicted. To illustrate the capabilities of the developed model to predict the complex behavior of concrete exposed to high temperature, simulations are performed through numerical loading paths scenarios. The model is able to accurately reproduce all the experimental data.

  10. Mortalite liee au VIH chez les enfants aux Chu campus et tokoin de ...

    African Journals Online (AJOL)

    Introduction. Le but de ce travail était d'étudier la mortalité liée au VIH chez les enfants séropositifs aux CHU-Campus et Tokoin de Lomé. Patients et méthode. Il s'est agi d'une étude prospective qui s'est déroulée dans les services de pédiatrie des CHU-Campus et Tokoin de Lomé et qui a couvert une période de 6 mois ...

  11. Evaluation of the radiology state at the CEA/Fontenay-aux-Roses and its environment

    International Nuclear Information System (INIS)

    2000-10-01

    Since 1946 the nuclear installations followed one other at the CEA of Fontenay-aux-Roses still their gradual stop the last ten years, except two installations INB34 and INB73, necessary for the wastes management. Today these installations form the subject of a drainage program. The public opinion is regularly informed on this program since 1999. This document presents the stock of the actions realized since this date: the track keeping of the sites activities impacts on the environment and the actions realized since 1999. (A.L.B.)

  12. Conference - Découvrez notre région - Aux bornes de Genève

    CERN Multimedia

    Staff Association

    2016-01-01

      Les premières bornes-frontière sont posées en 1816 aux confins du royaume de Sardaigne, d’autres feront leur apparition dès 1818 du côté du royaume de France. Deux cents ans plus tard, on retrouve toujours ces pierres, témoins de la naissance du canton et patrimoine partagé des communes genevoises, gessiennes et savoisiennes qui font notre région.  

  13. Perception des risques liés aux changements climatiques dans les ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    4 sept. 2014 ... L'équipe du projet Perception du risque et vulnérabilité des milieux humides sur la côte atlantique de l'Amérique du Sud, qui a commencé en 2012, privilégie une démarche de gestion intégrée des zones côtières et s'appuie sur les perceptions que les parties prenantes ont des risques liés aux ...

  14. Fertilisation et sensibilité des cultures de laitue et de tomate aux bioagresseurs

    OpenAIRE

    Julhia, L.; Nicot, Philippe C.

    2014-01-01

    Les producteurs de légumes sont confrontés à de nouveaux défis avec la réduction de l’usage des produits phytosanitaires. Limiter le recours aux moyens de lutte chimique conduit à revisiter les pratiques et à mettre en oeuvre des stratégies globales à moindre risque phytosanitaire. La fertilisation est examinée dans son action sur la santé des plantes et comme levier dans la gestion des bioagresseurs. L’étude porte sur deux cultures légumières majeures en France, en termes de surfaces, la lai...

  15. Large Eddy simulations of jet in cross flow; Simulations aux grandes echelles: application au jet transverse

    Energy Technology Data Exchange (ETDEWEB)

    Priere, C

    2005-01-15

    Nowadays, environmental and economic constraints require considerable research efforts from the gas turbine industry. Objectives aim at lowering pollutants emissions and fuel consumption. These efforts take a primary importance to satisfy a continue growth of energy production and to obey to stringent environmental legislations. Recorded progresses are linked to mixing enhancement in combustors running at lean premixed operating point. Indeed, industry shows itself to be attentive in the mixing enhancement and during the last years, efforts are concentrated on fresh and burned gas dilution. The Jet In Cross Flow (JICF), which constitutes a representative case to further the research effort. It has been to be widely studied both in experimentally and numerically, and is particularly well suited for the evaluation of Large Eddy Simulations (LES). This approach, where large scale phenomena are naturally taken into account in the governing equation while the small scales are modelled, offers the means to well-predict such flows. The main objective of this work is to gauge and to enhance the quality of the LES predictions in JICF configurations by means of numerical tools developed in the compressible AVBP code. Physical and numerical parameters considered in the JICF modelization are taken into account and strategies that are able to enhance quality of LES results are proposed. Configurations studied in this work are the following: - Influences of the boundary conditions and jet injection system on a free JICF - Study of static mixing device in an industrial gas turbine chamber. - Study of a JICF configuration represented a dilution zone in low emissions combustors. (author)

  16. Formation en ligne sur les applications mobiles utilisées aux fins ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Linkage for Education and Research in Nursing (LEARN), une initiative de TIC-D dans les Caraïbes. Les infirmières représentent le plus important groupe de professionnels de la santé pouvant influer sur la qualité des soins dans les services de santé. Voir davantageLinkage for Education and Research in Nursing ...

  17. Détermination des radionucléides dans le repas. Application aux ...

    African Journals Online (AJOL)

    40 sont des radionucléides naturels présents dans les riz, les tubercules, les bouillons et les friandises. Dans les quatre échantillons des repas du Riz analysés, les activités spécifiques en potassium-40 sont différentes. Cette différence est ...

  18. Modification chimique d'antioxydants pour les rendre lipophiles : application aux tannins

    OpenAIRE

    Poaty-Poaty , Bouddah

    2009-01-01

    Ce travail fut pour moi une expérience pétillante en dépit de l'énorme stress qu'il a occasionné. J'en tire une réelle satisfaction personnelle car cela est presque exclusivement le fruit de ma réflexion et de ma persévérance dans l'effort; In the order to use natural antioxidants in lipidic substances, we wanted to make lipophilic of tannins by grafting on them carbonaceous chains through mild and simple chemical modifications. First, we used model substrates of tannins (phenol, catechol, ga...

  19. Safety Training: Sensibilisation aux gestes et postures de travail

    CERN Multimedia

    Laetitia Laddada

    2004-01-01

    Nous vous proposons un nouveau cours de sécurité lié aux manutentions manuelles (durée 1 jour) : Sensibilisation aux gestes et postures de travail. Si vous êtes amené à manipuler régulièrement des charges lourdes ou volumineuses, cette formation peut vous aider à prévenir les lésions musculaires ou dorsales. A l'issue de cette formation, vous serez capable d'adopter et d'appliquer les principes de base de sécurité physique et d'économie d'efforts dans les manipulations d'objets. Les cours sont pris en charge par la Commission de Sécurité. L'inscription EDH est obligatoire. Pour plus d'information, veuillez consulter les pages Formation & Développement (Groupe Sécurité). Formation & Développement (Groupe Sécurité) FORMATION EN SECURITE SAFETY TRAINING Laetitia Laddada 73811 - 79236 safety.training@cern.ch

  20. Safety Training: Sensibilisation aux gestes et postures de travail

    CERN Multimedia

    Laetitia Laddada

    2004-01-01

    Nous vous proposons un nouveau cours de sécurité lié aux manutentions manuelles (durée 1 jour) : Sensibilisation aux gestes et postures de travail. Si vous êtes amené à manipuler régulièrement des charges lourdes ou volumineuses, cette formation peut vous aider à prévenir les lésions musculaires ou dorsales. A l'issue de cette formation, vous serez capable d'adopter et d'appliquer les principes de base de sécurité physique et d'économie d'efforts dans les manipulations d'objets. Les cours sont pris en charge par la Commission de Sécurité. L'inscription EDH est obligatoire. Pour plus d'information, veuillez consulter les pages Formation & Développement (Groupe Sécurité). Formation & Développement (Groupe Sécurité) FORMATION EN SECURITE SAFETY TRAINING Laetitia Laddada 73811 - 79236 sa...

  1. Safety Training: Sensibilisation aux gestes et postures de travail

    CERN Multimedia

    Laetitia Laddada

    2004-01-01

    >Nous vous proposons un nouveau cours de sécurité lié aux manutentions manuelles (durée 1 jour) : Sensibilisation aux gestes et postures de travail. Si vous êtes amené à manipuler régulièrement des charges lourdes ou volumineuses, cette formation peut vous aider à prévenir les lésions musculaires ou dorsales. A l'issue de cette formation, vous serez capable d'adopter et d'appliquer les principes de base de sécurité physique et d'économie d'efforts dans les manipulations d'objets. Les cours sont pris en charge par la Commission de Sécurité. L'inscription EDH est obligatoire. Pour plus d'information, veuillez consulter les pages Formation & Développement (Groupe Sécurité). Formation & Développement (Groupe Sécurité) FORMATION EN SECURITE SAFETY TRAINING Laetitia Laddada 73811 - 79236 s...

  2. Systèmes locaux d'alerte précoce et de réponse aux urgences ...

    African Journals Online (AJOL)

    Le régime démocratique laisse souffler le vent qui fait apparaitre aux élus locaux et aux services déconcentrés de l'État un nouvel élan et d'état d'esprit soumis désormais entre les injonctions du DNPGCCA, les attentes des populations vulnérables, à l'empilement des missions d'évaluations sans suite concrètes en termes ...

  3. ETUDES ANALYTIQUES : Détection des OGM : du libre choix des consommateurs aux études de biovigilance

    Directory of Open Access Journals (Sweden)

    Bertheau Yves

    2000-07-01

    Full Text Available Les récentes affaires de semences conventionnelles de colza et de maïs contaminées par des traces d’OGM ont à nouveau, s’il en était besoin, rappelé à notre bon souvenir les besoins en méthodes de détection et d’identification des OGM fiables et sensibles. Les développements se poursuivent, certes bien plus lentement qu’initialement espéré du fait du nombre important de facteurs à maîtriser et du caractère relativement inédit de ce travail. Concernant des matrices alimentaires variées, cette détection se heurte au manque de recul dans plusieurs domaines tels que celui de l’extraction et la purification d’acides nucléiques en quantité et en qualité. Bien que développées pour satisfaire aux besoins réglementaires européens concernant l’alimentation humaine, ces méthodes devraient être aisément applicables dans d’autres domaines concernés par les OGM (étude des transferts de gènes par flux pollinique, éventuels transferts horizontaux, suivi des acides nucléiques lors de l’ingestion.... Au-delà des OGM, les méthodes mises en œuvre devraient présenter un intérêt dans d’autres domaines comme la microbiologie, l’épidémiologie ou l’authentification des composants biologiques d’un produit.

  4. Application of PCT to the EBR II ceramic waste form

    International Nuclear Information System (INIS)

    Ebert, W. L.; Lewis, M. A.; Johnson, S. G.

    2002-01-01

    We are evaluating the use of the Product Consistency Test (PCT) developed to monitor the consistency of borosilicate glass waste forms for application to the multiphase ceramic waste form (CWF) that will be used to immobilize waste salts generated during the electrometallurgical conditioning of spent sodium-bonded nuclear fuel from the Experimental Breeder Reactor No. 2 (EBR II). The CWF is a multiphase waste form comprised of about 70% sodalite, 25% borosilicate glass binder, and small amounts of halite and oxide inclusions. It must be qualified for disposal as a non-standard high-level waste (HLW) form. One of the requirements in the DOE Waste Acceptance System Requirements Document (WASRD) for HLW waste forms is that the consistency of the waste forms be monitored.[1] Use of the PCT is being considered for the CWF because of the similarities of the dissolution behaviors of both the sodalite and glass binder phases in the CWF to borosilicate HLW glasses. This paper provides (1) a summary of the approach taken in selecting a consistency test for CWF production and (2) results of tests conducted to measure the precision and sensitivity of the PCT conducted with simulated CWF

  5. Contribution to the determination of Sb-Ag-Cu-Ga-Mo-Zn using 14 MeV neutron activation; Contribution au dosage de Sb-Ag-Cu-Ga-Mo-Zn par activation aux neutrons de 14 MeV

    Energy Technology Data Exchange (ETDEWEB)

    Crambes, M [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1966-04-01

    By using, 14 MeV, neutron irradiation it is possible to extend the field of application of neutron radio-activation analysis, in particular to the case of light elements. For, many other elements it can replace in-pile irradiation thereby making it possible, thanks to portable 14 MeV neutron generators, to carry out radio-activation analyses away from nuclear-research c e n t r e s. With a view to applying this analytical technique to routine work, we have developed some rapid chemical separation methods in order to make possible the determination of several elements which after exposure to fast neutrons, produce {beta} emitting nuclides which cannot be differentiated by a simple instrumental study, the emitted radiation being of the same type and of similar half-life the two cases. (author) [French] L'irradiation au moyen de neutrons de 14 MeV permet d'etendre le domaine d'application de l'analyse par radioactivation neutronique, en particulier aux elements legers. Cependant pour de nombreux autres elements elle peut remplacer l'irradiation en reacteur nucleaire permettant ainsi grace aux ensembles portables producteurs de neutrons de 14 MeV, l'extension de l'analyse par radioactivation a l'exterieur des centres d'etudes nucleaires. Dans le but d'appliquer cette methode d'analyse a des travaux de routine, nous avons mis au point des separations chimiques rapides, afin de permettre le dosage de quelques elements qui par irradiation aux neutrons rapides, engendrent des nucleides emetteurs {beta} qu'une simple etude instrumentale ne peut differencier en raison de l'identite de leur rayonnement et de leurs periodes radioactives trop proches. (auteur)

  6. Crystalline phase, microstructure, and aqueous stability of zirconolite-barium borosilicate glass-ceramics for immobilization of simulated sulfate bearing high-level liquid waste

    Science.gov (United States)

    Wu, Lang; Xiao, Jizong; Wang, Xin; Teng, Yuancheng; Li, Yuxiang; Liao, Qilong

    2018-01-01

    The crystalline phase, microstructure, and aqueous stability of zirconolite-barium borosilicate glass-ceramics with different content (0-30 wt %) of simulated sulfate bearing high-level liquid waste (HLLW) were evaluated. The sulfate phase segregation in vitrification process was also investigated. The results show that the glass-ceramics with 0-20 wt% of HLLW possess mainly zirconolite phase along with a small amount baddeleyite phase. The amount of perovskite crystals increases while the amount of zirconolite crystals decreases when the HLLW content increases from 20 to 30 wt%. For the samples with 20-30 wt% HLLW, yellow phase was observed during the vitrification process and it disappeared after melting at 1150 °C for 2 h. The viscosity of the sample with 16 wt% HLLW (HLLW-16) is about 27 dPa·s at 1150 °C. The addition of a certain amount (≤20 wt %) of HLLW has no significant change on the aqueous stability of glass-ceramic waste forms. After 28 days, the 90 °C PCT-type normalized leaching rates of Na, B, Si, and La of the sample HLLW-16 are 7.23 × 10-3, 1.57 × 10-3, 8.06 × 10-4, and 1.23 × 10-4 g·m-2·d-1, respectively.

  7. Lanthanide-activated Na5Gd9F32 nanocrystals precipitated from a borosilicate glass: Phase-separation-controlled crystallization and optical property

    International Nuclear Information System (INIS)

    Chen, Daqin; Wan, Zhongyi; Zhou, Yang; Chen, Yan; Yu, Hua; Lu, Hongwei; Ji, Zhenguo; Huang, Ping

    2015-01-01

    Highlights: • Na 5 Gd 9 F 32 nanocrystals embedded glass ceramics were fabricated for the first time. • Such glass ceramics were achieved by phase-separation-controlled crystallization. • Elemental mapping evidenced the segregation of activators into the Na 5 Gd 9 F 32 lattice. • Luminescent color could be tuned by controlling glass crystallization temperature. - Abstract: Lanthanide-activated cubic Na 5 Gd 9 F 32 nanocrystals were precipitated from a borosilicate glass with a specifically designed composition. The precursor glass is already phase-separated after melt-quenching, which is beneficial to the realization of the controllable glass crystallization for affording desirable size, morphology and activator partition. Elemental mapping in the scanning transmission electron microscopy evidenced that the segregation of lanthanide ions into the Na 5 Gd 9 F 32 lattice was in situ formed without the requirement of long-range ionic diffusion. Impressively, such fabricated glass ceramic co-doped with Yb 3+ /Er 3+ ions exhibited intense upconversion luminescence, which was about 500 times higher than that of the precursor glass, and its luminescent color could be easily tuned from red to green by controlling glass crystallization temperature. It is anticipated that such phase-separation synthesis strategy with precise control over nanostructure of glass ceramics offer a great opportunity to design other highly transparent nanocomposites with a wide range of tunable optical properties

  8. A Comparison of Modifications Induced by Li3+ and Ag14+ Ion Beam in Spectroscopic Properties of Bismuth Alumino-Borosilicate Glass Thin Films

    Directory of Open Access Journals (Sweden)

    Ravneet Kaur

    2013-01-01

    Full Text Available Ion irradiation effects on the glass network and structural units have been studied by irradiating borosilicate glass thin film samples with 50 MeV Li3+ and 180 MeV Ag14+ swift heavy ions (SHI at different fluence rates ranging from 1012 ions/cm2 to 1014 ions/cm2. Glass of the composition (65-x Bi2O3-10Al2O3-(65-y B2O3-25SiO2 (x = 45, 40; y = 20, 25 has been prepared by melt quench technique. To study the effects of ionizing radiation, the glass thin films have been prepared from these glasses and characterized using XRD, FTIR, and UV-Vis spectroscopic techniques. IR spectra are used to study the structural arrangements in the glass before and after irradiation. The values of optical band gap, Urbach energy, and refractive index have been calculated from the UV-Vis measurements. The variation in optical parameters with increasing Bi2O3 content has been analyzed and discussed in terms of changes occurring in the glass network. A comparative study of the influence of Li3+ ion beam on structural and optical properties of the either glass system with Ag14+ ion is done. The results have been explained in the light of the interaction that SHI undergo on entering the material.

  9. Properties of sodium borosilicate glasses/Al2O3 sintered composites containing fluorides. Gan Fukkabutsu hokei san natoriumu garasu to alumina fukugo shoketsutai no bussei

    Energy Technology Data Exchange (ETDEWEB)

    Ryu, Bonggi; Yasui, I [The Univ. of Tokyo, Tokyo (Japan). Inst. of Industrial Science

    1993-06-01

    Glass/alumina sintered composites were synthesized from sodium borosilicate glass powder containing fluorides like AlF3 and NaF3, and Al2O3, and change in material properties was examined. Glass compositions of B2O3 and Na2O greatly affected the crystal phase and material properties. Nephelin crystal phase was extracted by the reaction of Na2O, NaF2, SiO2 and Al2O3 when B/Na<1. Coefficient of thermal expansion increased with the increase of Na/Si ratio. The residual amount of fluorides of sintered materials in nitrogen atmosphere was higher than that of air, and differed with the type of fluoride. The F[sup -] of NaF is bonded with Si of glass network and forms quiet stable glass structure, whereas, F[sup -] of AlF3 reacts with Si[sup 4+] forming SiF4 which is vaporized. Sintering temperature and dielectric constant of sintered materials containing fluoride was lower than the sintered materials without fluorides addition, however, at a sintering temperature range of 100 to 150[degree]C, it was inferred that this was because of the increase in voids due to SiF4 formed in the reaction. 16 refs., 17 figs., 3 tabs.

  10. Amélioration de la capacité d'adaptation sociale et écologique aux ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    ... en plus intenses se multiplient en raison des phénomènes météorologiques extrêmes. ... d'établir des cartes de vulnérabilité aux changements climatiques et de ... intermédiaire et fonctionnaires des administrations locales et régionales.

  11. Diplomatie de Léopold II face aux puissances coloniales en Afrique. Contribution à l'histoire diplomatique du Congo

    OpenAIRE

    Baenda Fimbo, Zacharie

    2011-01-01

    Cet article essaie d'analyser les stratégies diplomatiques du roi Léopold II face aux grandes puissances de l'époque lors du partage du continent africains. Ces stratégies lui ont permis de gagner la Congo au centre de l'Afrique. Peer reviewed

  12. Mise en place des préalables aux essais randomisés d'interventions ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Mise en place des préalables aux essais randomisés d'interventions ... fund is to support applied research in areas vital to achieving long-term food security. ... The Science Granting Councils Initiative in sub-Saharan Africa wins Science ...

  13. Dynamiques de résistance aux normes révolutionnaires à Cuba

    OpenAIRE

    Geoffray, Marie-Laure

    2013-01-01

    Les normes du régime révolutionnaire sont, à Cuba, inscrites dans l’espace. Elles fonctionnent comme des signes performatifs qui à la fois rappellent constamment la présence du pouvoir et catégorisent les individus selon leur conformité aux normes. Mais, depuis la crise économique des années 1990, des logiques centrifuges à l’œuvre au sein de la société cubaine viennent remettre en question la capacité du régime à générer une socialisation révolutionnaire homogène. On observe des dynamiques s...

  14. A. Lacassagne : de l’archive mineure aux Archives d’anthropologie criminelle

    Directory of Open Access Journals (Sweden)

    Philippe Artières

    2005-01-01

    Full Text Available En 1921, le médecin Alexandre Lacassagne offre à la ville de Lyon ses archives et son importante bibliothèque. Depuis son installation au début des années 1880, Lacassagne qui y détient la chaire de médecine légale et de toxicologie, est devenu l’une des figures les plus célèbre de la ville. Il est intervenu à plusieurs reprises dans les affaires municipales et notamment en matière d’hygiène urbaine, il a surtout pris part comme expert aux grandes affaires criminelles ; il a ainsi fait de Lyo...

  15. Safety Training: Ergonomie - Sensibilisation aux gestes et postures de travail

    CERN Multimedia

    Laetitia Laddada

    2004-01-01

    Nous vous proposons un nouveau cours d'ergonomie (durée : 1 jour) Sensibilisation aux gestes et postures de travail. A l'issue de cette formation, vous serez capable d'adopter et d'appliquer les principes de base de sécurité physique et d'économie d'efforts dans les manipulations d'objets. Les cours sont pris en charge par la Commission de Sécurité. L'inscription EDH est obligatoire. Pour plus d'information, veuillez consulter les pages Formation & Développement (Groupe Sécurité). FORMATION EN SECURITE SAFETY TRAINING Laetitia Laddada 73811 - 79236 safety.training@cern.ch

  16. La Relativité restreinte expliquée aux enfants (de 7 à 107 ans)

    OpenAIRE

    Marle , Charles-Michel

    2014-01-01

    Ce texte est la version française de l'article "Relativity, the Special Theory, explained to Children (from 7 to 107 years old)". Il est un peu plus détaillé que la version anglaise: il comporte deux figures de plus et la démonstration détaillée du point le plus délicat.; L'auteur pense qu'il est possible d'expliquer aux enfants de 15 a 16 ans les idées essentielles de la théorie de la Relativité, sans aucun calcul compliqué, en n'utilisant que quelques notions très simples de géométrie affin...

  17. Report on nuclear safety and transparency 2011 - Fontenay-aux-Roses CEA centre

    International Nuclear Information System (INIS)

    2012-06-01

    After a brief presentation of the Fontenay-aux-Roses CEA centre, this report indicates the different safety measures in the different nuclear base installations (INB) of this site (measures related to different risks, to emergency situations, to inspections and audits). It describes measures related to radiation protection: organisation, dosimetry results. It presents the different significant events which occurred in 2011 and were declared to the ASN. It discusses the results of measurements of liquid, gaseous and chemical releases from the installations and their impact on the environment. It addresses the radioactive waste management (measures to limit their volume and to limit their impact on health and on the environment, notably on water and soils, type and quantities of wastes stored in INBs). It presents the different measures and actions related to information transparency

  18. EMC: a new equipment for repackaging the ancient waste from Fontenay-aux-Roses CEA site

    International Nuclear Information System (INIS)

    Ithurbide, A.; Masy, J.C.; Serrano, R.; Blanc, S.

    2017-01-01

    A new equipment called EMC (Equipment for measuring and packaging) is being built on the Fontenay-aux Roses site in the framework of the cleaning-up of this CEA site. Studies on irradiated fuels and on radio-chemical processes were performed till 1995 and a large quantity of radioactive waste were generated and have stayed on the site so far in storage pits. EMC purpose is to prepare high level radioactive waste for their removal towards the Diadem storing facility that is being built on the Marcoule CEA site. EMC will deal with α-emitter contaminated waste and will be able to recover ancient 50 l waste drums from storage pits, to characterize their radioactive content, to open them, to package them in CDD1 drum (each CDD1 drum can contain up to 5 ancient drums), and to load CDD1 drums in transport packing. EMC is expected to operate for 4 years. (A.C.)

  19. Decommissioning works are going on at Fontenay-aux-roses CEA center

    International Nuclear Information System (INIS)

    Anon.

    2003-01-01

    The CEA center of Fontenay-aux-roses is pursuing the dismantling operations of its nuclear installations. In 2003 120 glove boxes of the plutonium chemistry laboratory were disassembled and moved to the Cadarache CEA center. Hot cells from the Castor, Cyrano and Petrus lines are currently undergoing decontamination operations before being dismantled. As for the processing station of liquid effluents, the cutting works of the incinerator of low-level radioactive wastes and of the tanks began in 2003 and are expected to be over by end 2004. The Triton research reactor was decommissioned in 1982 and dismantling works on its hot cell and on its pool began at the end of 2003. (A.C.)

  20. Soins primaires aux adultes ayant une déficience développementale

    Science.gov (United States)

    Sullivan, William F.; Berg, Joseph M.; Bradley, Elspeth; Cheetham, Tom; Denton, Richard; Heng, John; Hennen, Brian; Joyce, David; Kelly, Maureen; Korossy, Marika; Lunsky, Yona; McMillan, Shirley

    2011-01-01

    Résumé Objectif Mettre à jour les lignes directrices canadiennes de 2006 sur les soins primaires aux adultes ayant une déficience développementale (DD) et présenter des recommandations pratiques fondées sur les connaissances actuelles pour traiter des problèmes de santé particuliers chez des adultes ayant une DD. Qualité des preuves Des professionnels de la santé expérimentés participant à un colloque et un groupe de travail subséquent ont discuté et convenu des révisions aux lignes directrices de 2006 en se fondant sur une recherche documentaire exhaustive, la rétroaction obtenue des utilisateurs du guide de pratique et les expériences cliniques personnelles. La plupart des preuves disponibles dans ce domaine viennent de l’opinion d’experts ou de déclarations consensuelles publiées (niveau III). Message principal Les adultes ayant une DD ont des problèmes de santé complexes, dont plusieurs diffèrent de ceux de la population en général. De bons soins primaires permettent d’identifier les problèmes de santé particuliers dont souffrent les adultes ayant une DD pour améliorer leur qualité de vie et leur accès aux soins de santé et prévenir la morbidité et le décès prématuré. Ces lignes directrices résument les problèmes de santé générale, physique, comportementale et mentale des adultes ayant une DD que devraient connaître les professionnels des soins primaires et présentent des recommandations pour le dépistage et la prise en charge en se basant sur les connaissances actuelles que les cliniciens peuvent mettre en pratique. En raison de l’interaction des facteurs biologiques, psychoaffectifs et sociaux qui contribuent à la santé et au bien-être des adultes ayant une DD, ces lignes directrices insistent sur la participation des aidants, l’adaptation des interventions, au besoin, et la consultation auprès de divers professionnels de la santé quand ils sont accessibles. Elles mettent aussi en évidence la

  1. Dreamlands : des parcs d’attractions aux cités du futur

    OpenAIRE

    Didelon, Valéry

    2012-01-01

    Comme l’exposition éponyme qui s’est tenue au Centre Pompidou au printemps et à l’été 2010, le catalogue Dreamlands entend nous éclairer sur ce qu’ont en commun les premières expositions universelles, Disneyland, Las Vegas et Dubaï. L’hypothèse est ainsi posée : depuis la fin du XIXe siècle, le parc d’attractions serait devenu aux yeux des artistes, des architectes et des urbanistes un modèle pour imaginer et construire la ville de demain. Comme le champ de foire avant lui, il est de facto un...

  2. Des furoncles résistants aux antibiotiques: penser à la myiase !!

    Science.gov (United States)

    Ajili, Faida; Abid, Rim; Bousseta, Najeh; Mrabet, Ali; Karoui, Ghazi; Louzir, Bassem; Battikh, Riadh; Othmani, Salah

    2013-01-01

    Les myiases sont des infections parasitaires par des larves de mouches. La localisation cutanée doit être évoquée de retour d'un pays tropical devant une évolution inhabituelle de lésions cutanées. Nous rapportons une observation d'un militaire tunisien, ayant séjourné en République Démocratique du Congo. Il était atteint de myiase cutanée simulatrice d'une furonculose résistante aux antibiotiques. L'intérêt de cette observation est de souligner l'importance d’évoquer la myiase dont le traitement est simple et rapide chez un patient de retour de zone d'endémie. PMID:24106569

  3. Observation spatiale et SIG: des outils pour cartographier les zones sensibles aux mouvements de terrain

    Directory of Open Access Journals (Sweden)

    Jean-Yves SCANVIC

    1994-12-01

    Full Text Available Les niveaux de sensibilité des sols aux mouvements de terrain ont été cartographiés dans différents bassins de risques en Bolivie, en Colombie et à Taïwan, selon une méthodologie développée au BRGM et fondée en partie sur l’extraction visuelle et numérique d’informations contenues dans les données de télédétection spatiale stéréoscopiques et leur gestion-valorisation dans un SIG. Ces cartes font apparaître l’intérêt de l’imagerie Spot pour la gestion du risque naturel.

  4. Marjane Satrapi’s Poulet aux Prunes: fetish, desire, and illusions

    Directory of Open Access Journals (Sweden)

    Stefania Rimini

    2013-07-01

    Full Text Available Il saggio si propone di individuare e descrivere le sfumature erotiche e sentimentali del film Poulet aux prunes di Marjane Satrapi, felice adattamento dell’omonima graphic novel. Il racconto procede per scarti, ellissi, anticipazioni e flasback, dando luogo a una narrazione labirintica dalla singolare trama arabescante. Le sottili dinamiche seduttive messe in campo dal complesso stile di regia di Satrapi-Paronnaud vengono analizzate alla luce delle categorie feticistiche individuate da Massimo Fusillo, che offrono interessanti modelli di interazione fra desiderio e creatività. L’esito di tale indagine consente di ampliare il dibattito relativo al rapporto di scambio e interferenza fra oggetti, pulsioni e sguardi nel cinema contemporaneo.

  5. Effect of Gd2O3 doping on structure and boron volatility of borosilicate glass sealants in solid oxide fuel cells-A study on the La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF) cathode

    Science.gov (United States)

    Zhang, Qi; Tan, Shengwei; Ren, Mengyuan; Yang, Hsiwen; Tang, Dian; Chen, Kongfa; Zhang, Teng; Jiang, San Ping

    2018-04-01

    Boron volatility is one of the most important properties of borosilicate-based glass sealants in solid oxide fuel cells (SOFCs), as boron contaminants react with lanthanum-containing cathodes, forming LaBO3 and degrading the activity of SOFCs. Here, we report that the reaction between the volatile boron and a La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF) cathode during polarization can be significantly reduced by doping aluminoborosilicate glass with Gd2O3. Specifically, the Gd cations in glass with 2 mol.% Gd2O3 dissolve preferentially in the borate-rich environment to form more Gd-metaborate structures and promote the formation of calcium metaborate (CaB2O4); they also condense the B-O network after heat treatment, which suppresses poisoning by boron contaminants on the LSCF cathode. The results provide insights into design and development of a reliable sealing glass for SOFC applications.

  6. Alkaline solid polymer electrolytes and their application to rechargeable batteries; Electrolytes solides polymeres alcalins application aux generateurs electrochimiques rechargeables

    Energy Technology Data Exchange (ETDEWEB)

    Guinot, S

    1996-03-15

    A new family of solid polymer electrolytes (SPE) based on polyoxyethylene (POE), KOH and water is investigated in view of its use in rechargeable batteries. After a short review on rechargeable batteries, the preparation of various electrolyte compositions is described. Their characterization by differential scanning calorimetry (DSC), thermogravimetric analysis, X-ray diffraction and microscopy confirm a multi-phasic structure. Conductivity measurements give values up to 10 sup -3 S cm sup -1 at room temperature. Their use in cells with nickel as negative electrode and cadmium or zinc as positive electrode has been tested; cycling possibility has been shown to be satisfactory. (C.B.) 113 refs.

  7. Application of the decree 2910 for coal fired boilers; Application de l`arrete 2910 aux chaudieres a charbon

    Energy Technology Data Exchange (ETDEWEB)

    Hing, K. [CDF Energie, Charbonnages de France, 92 - Rueil-Malmaison (France)

    1997-12-31

    The impacts of the new French decree 2910 concerning the classification of all combustion equipment with regards to their energy sources, energy efficiency and pollution control, on 2 to 20 MW coal-fired boilers, are discussed, with emphasis on their pollutant emissions (SO{sub 2}, NO{sub x} and ashes). The compositions of several coals is presented and the various types of coal-fired boilers adapted to the new decree are presented: automatic boilers, dense fluidized bed boilers, vibrating and chain grids with fume tubes and water tubes

  8. Modelisation de la diffusion sur les surfaces metalliques: De l'adatome aux processus de croissance

    Science.gov (United States)

    Boisvert, Ghyslain

    Cette these est consacree a l'etude des processus de diffusion en surface dans le but ultime de comprendre, et de modeliser, la croissance d'une couche mince. L'importance de bien mai triser la croissance est primordiale compte tenu de son role dans la miniaturisation des circuits electroniques. Nous etudions ici les surface des metaux nobles et de ceux de la fin de la serie de transition. Dans un premier temps, nous nous interessons a la diffusion d'un simple adatome sur une surface metallique. Nous avons, entre autres, mis en evidence l'apparition d'une correlation entre evenements successifs lorsque la temperature est comparable a la barriere de diffusion, i.e., la diffusion ne peut pas etre associee a une marche aleatoire. Nous proposons un modele phenomenologique simple qui reproduit bien les resultats des simulations. Ces calculs nous ont aussi permis de montrer que la diffusion obeit a la loi de Meyer-Neldel. Cette loi stipule que, pour un processus active, le prefacteur augmente exponentiellement avec la barriere. En plus, ce travail permet de clarifier l'origine physique de cette loi. En comparant les resultats dynamiques aux resultats statiques, on se rend compte que la barriere extraite des calculs dynamiques est essentiellement la meme que celle obtenue par une approche statique, beaucoup plus simple. On peut donc obtenir cette barriere a l'aide de methodes plus precises, i.e., ab initio, comme la theorie de la fonctionnelle de la densite, qui sont aussi malheureusement beaucoup plus lourdes. C'est ce que nous avons fait pour plusieurs systemes metalliques. Nos resultats avec cette derniere approche se comparent tres bien aux resultats experimentaux. Nous nous sommes attardes plus longuement a la surface (111) du platine. Cette surface regorge de particularites interessantes, comme la forme d'equilibre non-hexagonale des i lots et deux sites d'adsorption differents pour l'adatome. De plus, des calculs ab initio precedents n'ont pas reussi a confirmer la

  9. Neutron moderation at very low temperatures (1691); Moderation des neutrons aux tres basses temperatures (1961)

    Energy Technology Data Exchange (ETDEWEB)

    Lacaze, A [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1961-04-15

    Starting from Harwell experiment carried out inside a low-power reactor, we intended to maintain a liquid hydrogen cell in a channel of the EL3 reactor (at Saclay) whose thermal neutrons flux is 10{sup 14} neutrons/cm{sup 2}/s. We tried to work out a device giving off an important beam of cold neutrons and able to operate in a way as automatic as possible during many consecutive day without a stop. Several circuits have already been achieved at very low temperatures but they brought out volumes and fluxes much lower than those we used this time. The difficulties we have met in carrying out such a device arose on the one hand from the very high energy release to which any kind of experiment is inevitably submitted when placed near the core of the reactor, on the other, hand from the very little room which is available in experimental channels of reactors. In such condition, it is necessary to use a moderator as effective as possible. This study is divided into three parts ; in the first part, we try to determine: a) conditions in which moderation takes place, hence the volume of the cell; b) materials likely to be used at low temperature and in pile; c) cooling system; hence we had to study fluid flow conditions at very low temperatures in very long ducts. The second part is devoted to the description of the device. The third part ventilates the results we have obtained. (author) [French] Partant de l'experience de Harwell faite dans une pile de faible puissance, nous nous sommes propose de maintenir une cellule d'hydrogene liquide dans un canal de la pile EL3 de Saclay dont le flux de neutrons thermiques est de 10{sup 14} neutrons par seconde et par cm{sup 2}. Nous avons cherche a realiser une installation donnant un faisceau de neutrons froids important, et pouvant fonctionner d'une maniere aussi automatique que possible, pendant des periodes de plusieurs jours sans arret. Plusieurs circuits aux tres basses temperatures ont deja ete realises, mais ils ne mettaient

  10. Contribution to the study of several chemical hazards in the Centre d'Etudes Nucleaires of Fontenay-aux-Roses; Contribution a l'etude de quelques nuisances chimiques au centre d'etudes nucleaires de Fontenay-aux-Roses

    Energy Technology Data Exchange (ETDEWEB)

    Megemont, C; Grau, C [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1968-10-01

    From the checking of 2750 index cards of hazards, the study relates the distribution of the chemical hazards in the Centre d'Etudes Nucleaires of Fontenay-aux-Roses. Those concerning the greatest number of agents in the Centre are classified according to the categories corresponding to the different conditions of working. Thus, the most important are put forward. Then, the authors rapidly make a review of hazards which may have some special interest because they appear more specific of the nuclear energy or because they are the most frequently noted on the index cards of hazards. The case of the tributylphosphate is studied more precisely. (authors) [French] A partir de l'examen de 2750 fiches de nuisances, l'etude porte sur la repartition des nuisances chimiques au Centre d'Etudes Nucleaires de Fontenay-aux-Roses. Celles qui concernent le plus grand nombre d'agents du Centre sont classees selon les categories correspondant aux differentes conditions de travail. Les plus importantes d'entre elles sont ainsi mises en evidence. | Les auteurs passent ensuite en revue, rapidement, les nuisances qui peuvent presenter un interet particulier soit parce qu'elles semblent plus specifiques de l'Energie Nucleaire, soit parce qu'on les rencontre le plus frequemment sur les fiches de nuisances. Le cas du tributylphosphate est envisage de facon plus detaillee. (auteurs)

  11. Former aux TICE : entre compétences techniques et modèles pédagogiques

    Directory of Open Access Journals (Sweden)

    Jacques Béziat

    2012-01-01

    Full Text Available Cette contribution discute des enjeux et des limites d’une formation aux compétences techniques attendues des futurs enseignants d’école primaire. Une formation est certainement nécessaire pour espérer voir des pratiques pédagogiques avec les TICE se développer en classe. Mais ce n’est qu’un des leviers pour leur intégration dans les pratiques scolaires. Une formation aux TICE suppose que l’on mette l’accent sur l’analyse de pratiques. Plus que de former « simplement » à l’usage pédagogique d’outils numériques, il est indispensable de former à la complexité de leurs enjeux intellectuels et pratiques.

  12. Order of 30 March 1988 on licensing of gaseous radioactive effluent releases by the Fontenay-aux-Roses Nuclear Research Centre

    International Nuclear Information System (INIS)

    1988-01-01

    This Decree prescribes the documents and information the Fontenay-aux-Roses Nuclear Research Centre must provide to the Central Service for Protection against Ionizing Radiation (SCPRI) and lays down the permissible effluent release limits for the Centre [fr

  13. Preliminary dismantling for the decommissioning of nuclear licensed facilities at the CEA Centre in Fontenay aux Roses

    International Nuclear Information System (INIS)

    Estivie, D.; Bohar, M.P.; Jeanjacques, M.; Binet, C.

    2008-01-01

    Under the perimeter modification programme for the Nuclear Licensed Facilities (NLFs) of the French Atomic Energy Commission centre at Fontenay aux Roses (CEN-FAR), preliminary dismantling work proved necessary to decommission the buildings outside the nuclear perimeter and create interim storage areas for waste packages. This summary describes the dismantling of Buildings 07, 53 and 91/54, which are the most representative of the preliminary dismantling work. (author)

  14. Recours aux TIC pour résoudre les problèmes d'eau en Ouganda ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Les technologies de l'information et de la communication (TIC) peuvent grandement aider les collectivités à se préparer et à s'adapter aux effets des changements climatiques. Divers projets rendent compte de l'utilité de recourir à de nouvelles technologies (telles que le téléphone mobile) et à des technologies classiques ...

  15. Second meeting of the Atomic and Molecular Data Centre network. Fontenay aux Roses, 23-24 May 1980

    International Nuclear Information System (INIS)

    Katsonis, K.

    1980-11-01

    Summary report of the Second A+M Data Centre Network (DCN) meeting convened by the IAEA Nuclear Data Section at the CEA Laboratory at Fontenay-aux-Roses, France, 23-24 May 1980. The meeting was attended by 20 representatives from centres and groups from six Member States concerned with the coordinated international management of atomic and molecular data pertinent to controlled fusion research and technology

  16. Recours aux TIC pour résoudre les problèmes d'eau en Ouganda ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    15 janv. 2012 ... Les technologies de l'information et de la communication (TIC) peuvent grandement aider les collectivités à se préparer et à s'adapter aux effets des changements climatiques. Divers projets rendent compte de l'utilité de recourir à de nouvelles technologies (telles que le téléphone mobile) et à des ...

  17. Le résumé graphique fournit des conseils aux décideurs en vue de ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Le résumé graphique fournit des conseils aux décideurs en vue de réduire la criminalité et la violence. 04 août 2015. Image. FLACSO. Pourquoi les villes où il existe des conditions d'exclusion sociale similaires présentent-elles des degrés de violence différents ? Des chercheurs soutenus par le CRDI au Costa Rica et au ...

  18. Comparison of VITEK 2 YST Card and API 20C AUX system in identification of non- albicans Candida species

    Directory of Open Access Journals (Sweden)

    Süleyman Durmaz

    2012-03-01

    Full Text Available Objectives: In the present study, it was aimed to compare results obtained by using VITEK 2 YST Card (bioMérieux, France with those obtained by using API 20C AUX (bioMérieux, France for identification of non- albicans Candida species, which was isolated from various clinical samples, at level of species.Materials and methods: Forty-one non-albicans Candida isolates, which were isolated from 28 urine, 10 blood and 3 vaginal swab specimens, and found to be negative by germ tube test, were identified by using VITEK 2 YST Card (bioMérieux, France. In addition, microscopic morphology was assessed in corn-meal Tween 80 agar, while carbohydrate assimilation was assessed by using commercially available API 20C AUX kit (bioMérieux, France.Results: Thirty-four isolates (82.9% were identified as identical species by these 2 systems, while different results were obtained in 7 isolates (17.1%. 5 isolates, identified as Candida glabrata by API 20C AUX system, were identified as Candida tropicalis (n=2, Candida krusei, Candida lipolitica and Candida kefyr by VITEK 2 YST Card. One other isolate, identified as C.tropicalis, was identified as Candida parapsilosis; and additional one isolate, identified as C.parapsilosis, was identified as C.tropicalis.Conclusion: It was concluded that one should be cautious in the identification of C.glabrata, in particular, C.tropicalis and C.parapsilosis, although between VITEK 2 YST Card and API 20C AUX system results was found largely similarity in identification of non-albicans Candida spp.

  19. Approche concertée en matière de lutte contre la violence faite aux ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Un projet antérieur (no 104346) avait permis au North East Network (NEN), en collaboration avec les services de santé et les forces de l'ordre de l'État du Meghalaya, de consigner les points de vue sur la violence faite aux femmes dans ces deux secteurs. En se fondant sur les constatations ayant émané de la recherche, ...

  20. Droits des femmes et accès à l'eau et aux systèmes d ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    L'ONG Women in Cities International (WICI) tente de trouver des moyens de remédier à cette situation en Inde. Cette subvention lui permettra d'utiliser le ... Le CRDI aide l'Inde à s'adapter aux changements climatiques au moyen de données probantes, et en faisant preuve d'innovation. Le CRDI investit dans des solutions ...

  1. Trousse de suivi et d'évaluation destinée aux initiatives d'adaptation ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    En Afrique, bon nombre de pays, de régions et d'organismes se dotent de programmes d'adaptation aux changements climatiques. Pour que ces programmes portent leurs fruits, ils devront régulièrement faire l'objet d'un suivi et d'une évaluation. Cette subvention servira à financer l'intégration d'un volet suivi et évaluation ...

  2. Neutron distribution in the central cell and a peripheral cell of the Fontenay-aux-Roses pile

    International Nuclear Information System (INIS)

    Roullier, F.

    1958-01-01

    The distribution of the neutron density has been determined in the central cell and a peripheral cell of the pile at Fontenay-aux-Roses. This measurement was carried out by the autoradiographic method with manganese detectors. The neutron density distribution in the uranium rod has already been studied. The measurement was completed by the study of the neutron density in the complete cell by means of detectors placed in the uranium and in the heavy water. (author) [fr

  3. Report on transparency and nuclear safety 2015 - Fontenay-aux-Roses CEA centre

    International Nuclear Information System (INIS)

    2016-06-01

    This document proposes, first, a presentation of the Fontenay-aux-Roses CEA centre, of its activities and installations. Then it gives a rather detailed overview of measures related to safety and to radiation protection within these activities and installations. Next, it reports significant events related to safety and to radiation protection which occurred in 2015 and which have been declared to the French nuclear safety authority (ASN). It discusses the results of release measurements (liquid and gaseous effluents, radiological assessment, and chemical assessment for various installations) and the control of the chemical and radiological impact of these gaseous and liquid effluents on the environment. Finally, it addresses the issue of radioactive wastes which are stored in the different nuclear base installations of the Centre. It indicates the different measures aimed at limiting the volume of these warehoused wastes and addresses their impact on health and environment. Nature and quantities of warehoused wastes are specified. Remarks and recommendations of the Health, Safety and Working Conditions Committee (CHSCT) are given

  4. Report on transparency and nuclear safety - Fontenay-aux-Roses CEA centre - 2012

    International Nuclear Information System (INIS)

    2013-01-01

    This report presents the different nuclear base installations (INB) of the Fontenay-aux-Roses CEA centre, gives an overview of measures regarding safety within these installations (organisation, general arrangements, arrangements related to different risks, defence in-depth, management of emergency situations, inspections, audits and second-level controls, arrangements and main events specific to the different installations and buildings, issues related to transports, soil radiological assessment) and measures related to radiation protection (organisation and results). It reports the significant events related to safety and radiation protection which occurred in 2012 and were declared to the ASN, and discusses how the return-on-experience has been used. It reports and comments the results of measurements of radiological and chemical gaseous and liquid effluents, of surveys of the environment. It also evokes important events related to these measurement and survey processes, presents the environmental management approach. The next part addresses the management of radioactive wastes: arrangements aimed at limiting the volume of warehoused wastes, and at limiting their impact on health and on the environment, nature and quantities of warehoused wastes. The different arrangements regarding transparency and information are reviewed (TSN report, newsletter, and so on)

  5. La formation des enseignants aux TIC : allier pédagogie et innovation

    Directory of Open Access Journals (Sweden)

    Marcel Lebrun

    2004-01-01

    Full Text Available Relativement au champ des technologies éducatives, nous souhaitons étayer l’hypothèse suivante : si généralement on attribue le fait d’apprendre aux étudiants, il est aussi vrai que les enseignants apprennent, que les sociétés apprennent. La cohérence et la préoccupation de ces différents niveaux (étudiants, enseignants, institutions autour de la question de l’apprentissage peuvent, selon nous, être considérées comme un guide et comme un signe d’une éducation de qualité. Dans ce cas, les modèles généraux de l’apprentissage et du développement de dispositifs pédagogiques peuvent être interrogés afin d’élaborer de nouveaux usages et de nouvelles méthodes d’enseignement et de formation des enseignants, pour promouvoir l’innovation technologique dans les institutions et pour en valider la qualité.

  6. Activation analysis using {gamma} photons; Analyse par activation aux photons {gamma}

    Energy Technology Data Exchange (ETDEWEB)

    Engelmann, Ch [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-07-01

    This report summarizes all the data required for using photonuclear reactions in the field of analysis. After a brief review of the elementary properties of nuclear reactions induced by photon irradiation, the main characteristics are given of high energy (E > 20 MeV) Bremsstrahlung sources. The principle of activation analysis based on the use of photons is given. Actual examples of the analytic possibilities are described in detail, in particular in the case of the determination of very small quantities (< 10{sup -6}) of C, N, O and F. The influence of interfering nuclear reactions is discussed. (author) [French] Ce rapport se propose de resumer l'ensemble des connaissances indispensables pour l'utilisation des reactions photonucleaires a des fins analytiques. Apres quelques rappels concernant les proprietes elementaires des reactions nucleaires induites par irradiation dans les photons, les principales caracteristiques des sources de rayonnement de freinage de haute energie (E > 20 MeV)| sont donnees. Le principe de l'analyse par activation aux photons est rappele. Des exemples concrets sur les possibilites analytiques sont developpes, particulierement en ce qui concerne la determination de quantites tres faibles (< 10{sup -6}) de C, N, O et F. L'influence des reactions nucleaires parasites est discutee. (auteur)

  7. Réponse équilibrée aux besoins en eau dans le bassin du Saïss au ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    ACCA

    par les changements climatiques. Ce projet du programme ACCA met l'accent sur l'agriculture, à l'origine de plus de 82 % de la consommation d'eau dans le bassin. Réponse équilibrée aux besoins en eaudans le bassin du Saïss au Maroc. De petits exploitants agricoles du bassin du Saïss font face aux pénuries d'eau ...

  8. Free volume of mixed cation borosilicate glass sealants elucidated by positron annihilation lifetime spectroscopy and its correlation with glass properties

    Science.gov (United States)

    Ojha, Prasanta K.; Rath, Sangram K.; Sharma, Sandeep K.; Sudarshan, Kathi; Pujari, Pradeep K.; Chongdar, Tapas K.; Gokhale, Nitin M.

    2015-01-01

    The role of La+3/Sr+2 ratios, which is varied from 0.08 to 5.09, on density, molar volume, packing fraction, free volume, thermal and electrical properties in strontium lanthanum aluminoborosilicate based glass sealants intended for solid oxide fuel cell (SOFC) applications is evaluated. The studies reveal expansion of the glass network evident from increasing molar volume and decreasing packing fraction of glasses with progressive La+3 substitutions. The molecular origin of these macroscopic structural features can be accounted for by the free volume parameters measured from positron annihilation lifetime spectroscopy (PALS). The La+3 induced expanded glass networks show increased number of subnanoscopic voids with larger sizes, as revealed from the ortho-positronium (o-Ps) lifetime and its intensity. A remarkably direct correspondence between the molar volume and fractional free volume trend is established with progressive La2O3 substitution in the glasses. The effect of these structural changes on the glass transition temperature, softening temperature, coefficient of thermal expansion, thermal stability as well as electrical conductivity has been studied.

  9. Shoot-supplied ammonium targets the root auxin influx carrier AUX1 and inhibits lateral root emergence in Arabidopsis

    KAUST Repository

    Li, Baohai

    2011-03-24

    Deposition of ammonium (NH4 +) from the atmosphere is a substantial environmental problem. While toxicity resulting from root exposure to NH4 + is well studied, little is known about how shoot-supplied ammonium (SSA) affects root growth. In this study, we show that SSA significantly affects lateral root (LR) development. We show that SSA inhibits lateral root primordium (LRP) emergence, but not LRP initiation, resulting in significantly impaired LR number. We show that the inhibition is independent of abscisic acid (ABA) signalling and sucrose uptake in shoots but relates to the auxin response in roots. Expression analyses of an auxin-responsive reporter, DR5:GUS, and direct assays of auxin transport demonstrated that SSA inhibits root acropetal (rootward) auxin transport while not affecting basipetal (shootward) transport or auxin sensitivity of root cells. Mutant analyses indicated that the auxin influx carrier AUX1, but not the auxin efflux carriers PIN-FORMED (PIN)1 or PIN2, is required for this inhibition of LRP emergence and the observed auxin response. We found that AUX1 expression was modulated by SSA in vascular tissues rather than LR cap cells in roots. Taken together, our results suggest that SSA inhibits LRP emergence in Arabidopsis by interfering with AUX1-dependent auxin transport from shoot to root. © 2011 Blackwell Publishing Ltd.

  10. Irradiations effects on the structure of boro-silicated glasses: long term behaviour of nuclear waste glassy matrices; Effets d'irradiations sur la structure de verres borosilicates - comportement a long terme des matrices vitreuses de stockage des dechets nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    Bonfils, J. de

    2007-09-15

    This work deals with the long term behaviour of R7T7-type nuclear waste glasses and more particularly of non-active boro-silicated glasses made up of 3 or 5 oxides. Radioactivity of active glasses is simulated by multi energies ions implantations which reproduce the same defects. The damages due to the alpha particles are simulated by helium ions implantations and those corresponding to the recoil nucleus are obtained with gold ions ones. Minor actinides, stemming from the used fuel, is simulated by trivalent rare-earths (Eu{sup 3+} and Nd{sup 3+}). In a first part, we have shown by macroscopic experiments (Vickers hardness - swelling) and optical spectroscopies (Raman - ATR-IR) that the structure of the glassy matrices is modified under implantations until a dose of 2,3.10{sup 13} at.cm{sup -2}, which corresponds to a R7T7 storage time estimated at 300 years. Beyond this dose, no additional modifications have been observed. The second part concerns the local environment of the rare-earth ions in glasses. Two different environments were found and identified as follows: one is a silicate rich one and the other is attributed to a borate rich one. (author)

  11. β-Irradiation Effects on the Formation and Stability of CaMoO4 in a Soda Lime Borosilicate Glass Ceramic for Nuclear Waste Storage.

    Science.gov (United States)

    Patel, Karishma B; Boizot, Bruno; Facq, Sébastien P; Lampronti, Giulio I; Peuget, Sylvain; Schuller, Sophie; Farnan, Ian

    2017-02-06

    Molybdenum solubility is a limiting factor to actinide loading in nuclear waste glasses, as it initiates the formation of water-soluble crystalline phases such as alkali molybdates. To increase waste loading efficiency, alternative glass ceramic structures are sought that prove resistant to internal radiation resulting from radioisotope decay. In this study, selective formation of water-durable CaMoO 4 in a soda lime borosilicate is achieved by introducing up to 10 mol % MoO 3 in a 1:1 ratio to CaO using a sintering process. The resulting homogeneously dispersed spherical CaMoO 4 nanocrystallites were analyzed using electron microscopy, X-ray diffraction (XRD), Raman and electron paramagnetic resonance (EPR) spectroscopies prior to and post irradiation, which replicated internal β-irradiation damage on an accelerated scale. Following 0.77 to 1.34 GGy of 2.5 MeV electron radiation CaMoO 4 does not exhibit amorphization or significant transformation. Nor does irradiation induce glass-in-glass phase separation in the surrounding amorphous matrix, or the precipitation of other molybdates, thus proving that excess molybdenum can be successfully incorporated into a structure that it is resistant to β-irradiation proportional to 1000 years of storage without water-soluble byproducts. The CaMoO 4 crystallites do however exhibit a nonlinear Scherrer crystallite size pattern with dose, as determined by a Rietveld refinement of XRD patterns and an alteration in crystal quality as deduced by anisotropic peak changes in both XRD and Raman spectroscopy. Radiation-induced modifications in the CaMoO 4 tetragonal unit cell occurred primarily along the c-axis indicating relaxation of stacked calcium polyhedra. Concurrently, a strong reduction of Mo 6+ to Mo 5+ during irradiation is observed by EPR, which is believed to enhance Ca mobility. These combined results are used to hypothesize a crystallite size alteration model based on a combination of relaxation and diffusion

  12. Mineralogical textural and compositional data on the alteration of basaltic glass from Kilauea, Hawaii to 300 degrees C: Insights to the corrosion of a borosilicate glass waste-form

    International Nuclear Information System (INIS)

    Smith, D.K.

    1990-01-01

    Mineralogical, textural and compositional data accompanying greenschist facies metamorphism (to 300 degrees C) of basalts of the East Rift Zone (ERZ), Kilauea, Hawaii may be evaluated relative to published and experimental results for the surface corrosion of borosilicate glass. The ERZ alteration sequence is dominated by intermittent palagonite, interlayered smectite-chlorite, chlorite, and actinolite-epidote-anhydrite. Alteration is best developed in fractures and vesicles where surface reaction layers root on the glass matrix forming rinds in excess of 100 microns thick. Fractures control fluid circulation and the alteration sequence. Proximal to the glass surface, palagonite, Fe-Ti oxides and clays replace fresh glass as the surface reaction layer migrates inwards; away from the surface, amphibole, anhydrite, quartz and calcite crystallize from hydrothermal fluids in contact with the glass. The texture and composition of basaltic glass surfaces are similar to those of a SRL-165 glass leached statically for sixty days at 150 degrees C. While the ERZ reservoir is a complex open system, conservative comparisons between the alteration of ERZ and synthetic borosilicate glass are warranted. 31 refs., 2 figs

  13. Du devenir de la notion de documentaire à l’ONF : des discours aux formes

    Directory of Open Access Journals (Sweden)

    Caroline Zéau

    2015-05-01

    Full Text Available Résumé La production documentaire fut toujours l’armature du mandat de l’Office national du film du Canada. Pour garantir la légitimité du cinéma auprès des instances publiques, son fondateur John Grierson a pris appui sur l’assise conceptuelle de l’Idée documentaire, une conception programmatique du cinéma qui soumettait celui-ci à la cause publique. Plus que jamais aujourd’hui, l’héritage de John Grierson est invoqué pour caractériser les valeurs associées à la mission de l’ONF, comme en témoignent les documents de communication produits par l’organisme. Plusieurs questions se posent alors : pourquoi la résurgence du lexique griersonien est-elle jugée pertinente aujourd’hui ? Et quelles sont les équivalences présupposées par ce retour aux sources ? Dans cet article, l’auteure se propose d’étudier la place et les valeurs aujourd’hui accordées à la notion de documentaire et aux objets qu’elle recouvre au sein des discours et des formes produits par l’ONF dans le cadre de la mutation technologique qui redéfinit sa mission et ses priorités depuis 2008. Ainsi seront examinées les déclinaisons terminologiques qui s’y rapportent—sur le site ONF.ca et les plans stratégiques 2008-2013 et 2013-2018—parallèlement à l’étude des formes nouvelles de documentaires produites pour les canaux de diffusion numériques qui définissent le champ de l’art interactif. Abstract Documentary production has always been central to the mandate of the National Film Board of Canada (NFB. To ensure the legitimacy of film among public authorities, its founder John Grierson built on the conceptual foundation of the Documentary Idea, a programmatic concept of cinema that places the latter at the service of the public. Today more than ever, the legacy of John Grierson is understood to characterize the values associated with the mission of the NFB, as evidenced by the institution’s communication documents

  14. The treatment of effluents; Ameliorations apportees aux traitements des residus radioactifs

    Energy Technology Data Exchange (ETDEWEB)

    Wormser, G; Rodier, J; Robien, E de; Fernandez, N [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1964-07-01

    For several years the French Atomic Energy Commission has been studying with interest problems presented by radio-active effluents. Since high activities have not yet received a definite solution we will deal only, in this paper, with the achievements and research concerning low and medium activity effluents. In the field of the achievements, we may mention the various effluent treatment stations which have been built in France; a brief list will be given together with an outline of their main new features. Thus in particular the latest treatment stations put into operation (Grenoble, Fontenay-aux-Roses, Cadarache) will be presented. From all these recent achievements three subjects will be dealt with in more detail. 1 - The workshop for treating with bitumen the sludge obtained after concentration of radionuclides. 2 - The workshop for treating radioactive solid waste by incineration. 3 - A unit for concentrating radio-active liquid effluents by evaporation. In the field of research, several topics have been undertaken, a list will be given. In most cases the research concerns the concentration of radionuclides with a view to a practical and low cost storage, a concentration involving an efficient decontamination of the aqueous liquids in the best possible economic conditions. For improving the treatments leading to the concentration of nuclides, our research has naturally been concerned with perfecting the treatments used in France: coprecipitation and evaporation. In our work we have taken into account in particular two conditions laid down in the French Centres. 1 - A very strict sorting out of the effluents at their source in order to limit in each category the volume of liquid to be dealt with. 2 - The necessity for a very complete decontamination due to the high population density in our country. In the last past we present two original methods for treating liquid effluents. 1 - The use of ion-exchange resins for liquids containing relatively many salts. The

  15. Exposition orale aux nanoparticules de dioxyde de titane (TiO2) : du franchissement de l’épithélium buccal et intestinal au devenir et aux effets dans l’organisme

    OpenAIRE

    Bettini, Sarah

    2014-01-01

    Face à l’utilisation exponentielle des nanomatériaux dans des produits de consommation courante, dont l’alimentation, les conséquences pour l’homme d’une exposition quotidienne aux faibles doses de nanoparticules posent des questions de santé publique. Parmi les différentes voies d’exposition, la voie orale reste la moins documentée, alors que des nanomatériaux sont couramment utilisés comme additifs alimentaires, ou incorporés `a des emballages au contact des aliments, de l’eau, pour b´en´ef...

  16. Canadian Environmental Assessment Act : A comprehensive study report on the partial diversion of the Sault aux Cochons River

    International Nuclear Information System (INIS)

    2002-04-01

    This report presents the results of an environmental assessment of Hydro-Quebec's proposed project to partially divert the waters of the Sault aux Cochons River to the Pipmuacan Reservoir through the Lionnet River. It also includes the results of public consultations conducted by Hydro-Quebec and of those held by the Bureau d'audience publiques sur l'environnement. The main environmental effects were summarized, including the cumulative effects and the effects caused by accidents and malfunctions that may occur. In addition, the terms and conditions of mitigation measures and follow-up programs were described and the significance of any environmental impacts were assessed. This project will increase the inflow of the Pipmuacan Reservoir, the main reservoir of the Bersimis complex on the Betsiamites River. The diverted water will produce more electricity when it is generated in the two power stations at the Bersimis complex than it does it does currently in the three power stations of the Sault aux Cochons River. Following mitigative measures, an average annual discharge of 6.5 m 3 /s will be diverted from the Sault aux Cochons River to the Lionnet River. A minimum flow of 1 m / s is anticipated. The proposal allows for more water to be diverted to the Pipmuacan reservoir to optimize the operation of existing power generating stations. This report outlined the current use of lands and resources for traditional purposes by Aboriginals. It also discussed the effects of natural events such as flooding, waves and climate that may cause damage to the facilities. It was determined that the project is not likely to cause significant effects on the renewable resources of the forest and the fisheries. The Department of Fisheries and Oceans, after having taking into account proposed mitigation measures, has rendered a preliminary conclusion which states that the project is not likely to have significant negative environmental effects. This decision will be reconsidered after

  17. Mesures de spectrométrie et de dosimétrie neutron aux postes de travail pour l'étalonnage de dosimètres individuels PGP-DIN

    OpenAIRE

    Itié, C.; Muller, H.; Asselineau, B.; Médioni, R.; Crovisier, P.; Valier-Bradier, P.; Groetz, J. E.; Piot, J.

    2002-01-01

    International audience; (ManuAcrit r e p le 3 juillet 2002, accepté le 29 septembre 2002) Dans le cadre de la mise en application des recommandations décrites dans la publication 60 de la CIPR, des mesures de spectrométrie neutron ont été réalisées à plusieurs postes de travail au CEA de Valduc. Le but de ces mesures était la détermination de nouveaux coefficients d'étalonnage h affecter aux dosimètres individuels neutron PGP-DIN afin de restituer correctement les doses reçues par les opérate...

  18. Annual progress report of the Fontenay-aux-Roses Research Group. January 1 to December 31 1977

    International Nuclear Information System (INIS)

    1977 at Fontenay-aux-Roses was dominated by the assembly and starting up of TFR 600, whereas at Grenoble it coincided with a period of full scientific production on Petula and Wega. On TFR 600 a study was made on discharges in the absence of a conducting shell and on plasma purity. Tokamak physics covered the analysis of the mechanism of disruptions and the dynamics of impurities on TFR 400, and the neutral injection (circular periplasmatron). Simultaneously the heating experiments and the diagnostics for TFR 600 were actively prepared, as well as the Torre II project [fr

  19. Etude de l'auto-adaptivité du filtre actif parallèle aux variations de la ...

    African Journals Online (AJOL)

    ﮫـﻋ ﺔﯾﺮﻈﻧ. -ﻚـﻋ. Résumé. Cet article s'intéresse à l'amélioration des performances du filtre actif parallèle pour s'adapter d'une manière automatique aux variations de la charge. Ce filtre est un onduleur de tension à MLI destiné à éliminer les harmoniques de courant générés par un pont redresseur triphasé non commandé ...

  20. Genome-wide analysis of Aux/IAA gene family in Solanaceae species using tomato as a model.

    Science.gov (United States)

    Wu, Jian; Peng, Zhen; Liu, Songyu; He, Yanjun; Cheng, Lin; Kong, Fuling; Wang, Jie; Lu, Gang

    2012-04-01

    Auxin plays key roles in a wide variety of plant activities, including embryo development, leaf formation, phototropism, fruit development and root initiation and development. Auxin/indoleacetic acid (Aux/IAA) genes, encoding short-lived nuclear proteins, are key regulators in the auxin transduction pathway. But how they work is still unknown. In order to conduct a systematic analysis of this gene family in Solanaceae species, a genome-wide search for the homologues of auxin response genes was carried out. Here, 26 and 27 non redundant AUX/IAAs were identified in tomato and potato, respectively. Using tomato as a model, a comprehensive overview of SlIAA gene family is presented, including the gene structures, phylogeny, chromosome locations, conserved motifs and cis-elements in promoter sequences. A phylogenetic tree generated from alignments of the predicted protein sequences of 31 OsIAAs, 29 AtIAAs, 31 ZmIAAs, and 26 SlIAAs revealed that these IAAs were clustered into three major groups and ten subgroups. Among them, seven subgroups were present in both monocot and dicot species, which indicated that the major functional diversification within the IAA family predated the monocot/dicot divergence. In contrast, group C and some other subgroups seemed to be species-specific. Quantitative real-time PCR (qRT-PCR) analysis showed that 19 of the 26 SlIAA genes could be detected in all tomato organs/tissues, however, seven of them were specifically expressed in some of tomato tissues. The transcript abundance of 17 SlIAA genes were increased within a few hours when the seedlings were treated with exogenous IAA. However, those of other six SlIAAs were decreased. The results of stress treatments showed that most SIIAA family genes responded to at least one of the three stress treatments, however, they exhibited diverse expression levels under different abiotic stress conditions in tomato seedlings. SlIAA20, SlIAA21 and SlIAA22 were not significantly influenced by stress

  1. Genome-wide survey of Aux/IAA gene family members in potato (Solanum tuberosum): Identification, expression analysis, and evaluation of their roles in tuber development.

    Science.gov (United States)

    Gao, Junpeng; Cao, Xiaoli; Shi, Shandang; Ma, Yuling; Wang, Kai; Liu, Shengjie; Chen, Dan; Chen, Qin; Ma, Haoli

    2016-03-04

    The Auxin/indole-3-acetic acid (Aux/IAA) genes encode short-lived nuclear proteins that are known to be involved in the primary cellular responses to auxin. To date, systematic analysis of the Aux/IAA genes in potato (Solanum tuberosum) has not been conducted. In this study, a total of 26 potato Aux/IAA genes were identified (designated from StIAA1 to StIAA26), and the distribution of four conserved domains shared by the StIAAs were analyzed based on multiple sequence alignment and a motif-based sequence analysis. A phylogenetic analysis of the Aux/IAA gene families of potato and Arabidopsis was also conducted. In order to assess the roles of StIAA genes in tuber development, the results of RNA-seq studies were reformatted to analyze the expression patterns of StIAA genes, and then verified by quantitative real-time PCR. A large number of StIAA genes (12 genes) were highly expressed in stolon organs and in during the tuber initiation and expansion developmental stages, and most of these genes were responsive to indoleacetic acid treatment. Our results suggested that StIAA genes were involved in the process of tuber development and provided insights into functional roles of potato Aux/IAA genes. Copyright © 2016 Elsevier Inc. All rights reserved.

  2. Le recours aux archives judiciaires pour étudier les habitudes de sommeil

    Directory of Open Access Journals (Sweden)

    Guillaume Garnier

    2009-10-01

    Full Text Available Les archives judiciaires possèdent de nombreux attraits, et certains sont parfois insoupçonnés. Les faits relatés dans les actes d’accusation par exemple, mais aussi les déclarations de témoins recèlent de petits détails sur les habitudes de sommeil qui passent souvent inaperçus aux yeux des historiens. Dans un corpus très large (du XVIIIe au xixe siècle on peut ainsi tenter de comprendre les logiques de sommeil : heures de coucher et lever, durée du sommeil, l’apparente vulnérabilité du repos nocturne, les déviances nocturnes, le lieu de sommeil. Mais dans une vue plus globale, les archives aident aussi à déterminer les rythmes nocturnes et notamment la place qu’y tient le sommeil. Les contraintes sociales et politiques, la dureté du travail et de la vie, l’importance de la religion transparaissent aussi pour former une culture spécifique du sommeil préindustriel.Judiciary records have many appealing aspects, some of which one would not suspect. What is related in indictment documents for instance, as well as in evidence statements, contains small details about sleeping habits that often go unnoticed by historians. Out of a very large corpus (from the xviiith till the xixth century, one can try and work out the rationale behind sleep: at what time people go to sleep or wake up, for how long, how vulnerable night sleep seems to be, nocturnal deviances, or where people sleep. But to a larger extent, records also help to determine nocturnal rhythms and more specifically the place that sleep holds in them. Social and political constraints, harshness of working and living conditions, the importance of religion, all show through and convey a specific culture of pre-industrial sleep.

  3. Neutron distribution in the central cell and a peripheral cell of the Fontenay-aux-Roses pile; Repartition des neutrons dans la cellule centrale et une cellule peripherique de la pile de Fontenay-aux-Roses

    Energy Technology Data Exchange (ETDEWEB)

    Roullier, F [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1958-07-01

    The distribution of the neutron density has been determined in the central cell and a peripheral cell of the pile at Fontenay-aux-Roses. This measurement was carried out by the autoradiographic method with manganese detectors. The neutron density distribution in the uranium rod has already been studied. The measurement was completed by the study of the neutron density in the complete cell by means of detectors placed in the uranium and in the heavy water. (author) [French] La repartition de la densite des neutrons a ete determinee dans la cellule centrale et une cellule peripherique de la pile de Fontenay-aux-Roses. Cette mesure a ete effectuee par la methode d'autoradiographie avec des detecteurs de manganese. La repartition de la densite des neutrons dans la barre d'uranium a deja ete etudiee. La mesure a ete completee par l'etude de la densite des neutrons dans la cellule complete a l'aide de detecteurs places dans l'uranium et dans l'eau lourde. (auteur)

  4. Cloning and characterization of an AUX/IAA gene in Populus davidiana x P. alba var. Pyramidalis and the correlation between its time-course expression and the levels of indole-3-acetic in saplings inoculated with Trichoderma

    International Nuclear Information System (INIS)

    Yao, Z.; Baloch, A.M.; Zhai, T.; Jiang, C.; Liu, Z.; Zhang, R.

    2018-01-01

    Poda AUX/IAA gene, encoding an early-stage responsive protein to auxin in Populus davidiana x P. alba var. pyramidalis (Shanxin poplar), was cloned. The length of mRNA transcript of Poda AUX/IAA was 741bp, encoding a 248-amino-acid protein product, Poda AUX/IAA ORF analysis suggested that Poda AUX/IAA contained one conserved domain (pfam02309). Predicted molecular weight of Poda AUX/IAA was found to be 27kDa and its theoretical isoelectric point was determined as 8.21. Poda AUX/IAA was predicted to be a hydrophilic nucleoprotein and its multi-sequence alignment analysis showed that it shares high identity in four conserved domains with eight AUX/IAA proteins in other Populus species and these sequences of Poda AUX/IAA shared highest similarity with Pt-IAA14.1 in P. trichocarpa. In this study, we found that Poda AUX/IAA was expressed in both leaves and roots of Shanxin poplar. Three strains of Trichoderma asperellum were used to inoculate Shanxin poplar saplings. Inoculated saplings were cultured for 72 h. It was then found that IAA levels in both leaves and roots of inoculated saplings gradually increased and time-course expression patterns of PodaAUX/IAA was changed along with IAA levels. Results of Pearson correlation analysis demonstrated a negative correlation between expression levels of Poda AUX/IAA and IAA levels in both leaves and roots of Shanxin poplar saplings when compared with control. Negative correlation in inoculated saplings were less significant, probably as a result of Trichoderma inducing. (author)

  5. Fixation of Radioactive Waste in Glass. Part II. The Experimental Evaluation of Phosphate and Borosilicate Glasses; Fixation des Dechets Radioactifs dans le Verre, Deuxieme Partie: Evaluation Experimentale des Verres au Phosphate et au Borosilicate; 0424 0418 041a 0421 0410 0426 0418 042f 0420 0410 0414 0418 041e 0410 041a 0422 0418 0412 041d 042b 0425 041e 0422 0425 041e 0414 041e 0412 0412 0421 0422 0415 041a 041b 0415 . 0427 0410 0421 0422 042c Ii. 042d 041a 0421 041f 0415 0420 0418 041c 0415 041d 0422 0410 041b 042c 041d 0410 042f 041e 0426 0415 041d 041a 0410 041a 0410 0427 0415 0421 0422 0412 0424 041e 0421 0424 0410 0422 041d 042b 0425 0418 0411 041e 0420 041e 0421 0418 041b 0418 041a 0410 0422 041d 042b 0425 0421 0422 0415 041a 041e 041b ; Fijacion de Desechos Radiactivos en Vidrio, Parte II: Evaluacion Experimental de los Vidrios al Fosfato y al Borosilicato

    Energy Technology Data Exchange (ETDEWEB)

    Elliot, M. N.; Grover, J. R.; Hardwick, W. H. [Atomic Energy Research Establishment, Harwell (United Kingdom)

    1963-02-15

    comme milieu de stockage, en les comparant aux verres au borosilicate. (author) [Spanish] El principal factor que es preciso tener en cuenta al proceder a la eleccion de un vidrio adecuado para almacenar por largos periodos desechos de productos de fision es el metodo de almacenamiento que se va a aplicar; el segundo factor es el grado de seguridad que ofrece la elaboracion del vidrio en un establecimiento de alta actividad. A su vez, los factores que interesan para el almacenamiento son la resistencia a la lixiviacion, la estabilidad termica y a las radiaciones y la proporcion de desechos que se pueden incorporar a la masa vitrea, mientras que las propiedados fisicas y quimicas de los aditivos vitrificantes, asi como el punto de fusion y la viscosidad del vidrio mismo, son factores que intervienen mas bien en el proceso de elaboracion. Los autores examinan la importancia relativa de todos estos factores. Exponen luego los resultados del estudio experimental de los vidrios al borosilicato que se han elegido para, los ensayos en instalacion piloto, incluso el efecto de dosis de radiacion hasta 10{sup 12} rad sobre sus propiedades fisicas y quimicas. Tambien examinaron vidrios de otras composiciones y compararon su posible utilidad, como medio de almacenamiento, con la de los vidrios al borosilicato. (author) [Russian] Steklo dlja dlitel'nogo hranenija othoDov, soderzhashhih produkty delenija, dolzhno vybirat'sja, vo-pervyh s uchetom predpolagaemogo metoda hranenija i , vo-vtoryh, s uchetom vozmozhnosti ego poluchenija na vysokoradioaktivnyh ustanovkah. Vazhnymi faktorami s tochki zrenija hranenija javljajutsja: stojkost' protiv vyshhelachivanjja, teplostojkost' i radiacionnaja stojkost', a takzhe predel'naja dolja vvodimyh othodov; chto zhe kasaetsja fizicheskogo haraktera i himicheskih svojstv jelementov, dobavljaemyh dlja stekloobrajeovanija, a takzhe tochki plavlenija i vjazkosti stekla, to jeti faktory kasajutsja processa izgotovlenija. Obsuzhdaetsja otnositel

  6. Accessibilité aux emplois en France : le rôle de la distance à la ville

    Directory of Open Access Journals (Sweden)

    Mohamed Hilal

    2004-12-01

    Full Text Available L'objet de cet article est de modéliser les niveaux d’accessibilité potentielle aux emplois des communes françaises selon le rôle de la distance à la ville. Pour ce faire, nous présentons, tout d’abord, un modèle d’accessibilité et la méthode mise en œuvre pour calculer de façon systématique, à partir des données du réseau routier, une matrice des plus courts chemins, mesurés en temps, entre les communes françaises. Ensuite, dans la deuxième partie, ces distances sont intégrées dans le modèle d’accessibilité retenu afin de mesurer la disponibilité potentielle aux emplois selon la distance au pôle urbain le plus proche et selon les principales catégories d’espace du zonage en aires urbaines et de son complément rural. Enfin, la mesure d’accessibilité potentielle est comparée à plusieurs mesures d’accessibilité empirique.

  7. Erbium-doped borosilicate glasses containing various amounts of P2O5 and Al2O3: Influence of the silica content on the structure and thermal, physical, optical and luminescence properties

    International Nuclear Information System (INIS)

    Bourhis, Kevin; Massera, Jonathan; Petit, Laeticia; Koponen, Joona; Fargues, Alexandre; Cardinal, Thierry; Hupa, Leena; Hupa, Mikko; Dussauze, Marc; Rodriguez, Vincent; Ferraris, Monica

    2015-01-01

    Highlights: • Er 3+ doped borosilicate glasses were processed with different compositions and characterizations. • An increase in the SiO 2 content leads to a silicate-rich environment around the Er 3+ site. • An increase in the SiO 2 content decreases the Er 3+ absorption cross-section at 980 nm. • Glasses with 60 mol% of SiO 2 exhibit a stronger emission intensity at 1530 nm than glasses with x = 50. • Highest 1.5 μm emission intensity was achieved for the Al and P containing glass with 60 mol% of SiO 2 . - Abstract: The influence of the silica content on several properties of Er-doped borosilicate glasses in the presence of various amounts of P 2 O 5 and Al 2 O 3 has been investigated. The introduction of P 2 O 5 and/or Al 2 O 3 are responsible for structural modifications in the glass network through a charge-compensation mechanism related to the formation of negatively-charged PO 4 and AlO 4 groups or through the formation of AlPO 4 -like structural units. In this paper, we show that an increase in the SiO 2 content leads to a silicate-rich environment around the Er 3+ site, resulting in an increased dependence of the Er 3+ ions optical and luminescence properties on the P 2 O 5 and/or Al 2 O 3 concentration. The highest emission intensity at 1.5 μm was achieved for the glass with an equal proportion of P and Al in the glass system with 60 mol% of SiO 2

  8. Genome-wide survey of Aux/IAA gene family members in potato (Solanum tuberosum): Identification, expression analysis, and evaluation of their roles in tuber development

    International Nuclear Information System (INIS)

    Gao, Junpeng; Cao, Xiaoli; Shi, Shandang; Ma, Yuling; Wang, Kai; Liu, Shengjie; Chen, Dan; Chen, Qin; Ma, Haoli

    2016-01-01

    The Auxin/indole-3-acetic acid (Aux/IAA) genes encode short-lived nuclear proteins that are known to be involved in the primary cellular responses to auxin. To date, systematic analysis of the Aux/IAA genes in potato (Solanum tuberosum) has not been conducted. In this study, a total of 26 potato Aux/IAA genes were identified (designated from StIAA1 to StIAA26), and the distribution of four conserved domains shared by the StIAAs were analyzed based on multiple sequence alignment and a motif-based sequence analysis. A phylogenetic analysis of the Aux/IAA gene families of potato and Arabidopsis was also conducted. In order to assess the roles of StIAA genes in tuber development, the results of RNA-seq studies were reformatted to analyze the expression patterns of StIAA genes, and then verified by quantitative real-time PCR. A large number of StIAA genes (12 genes) were highly expressed in stolon organs and in during the tuber initiation and expansion developmental stages, and most of these genes were responsive to indoleacetic acid treatment. Our results suggested that StIAA genes were involved in the process of tuber development and provided insights into functional roles of potato Aux/IAA genes. - Highlights: • A systematic analysis of the potato AUX/IAA gene family were performed. • StIAA genes were related to auxin perception and signal transduction. • Candidate StIAA genes likely related to tuber initiation and expansion were screened.

  9. Genome-wide survey of Aux/IAA gene family members in potato (Solanum tuberosum): Identification, expression analysis, and evaluation of their roles in tuber development

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Junpeng [State Key Laboratory of Crop Stress Biology for Arid Areas, College of Agronomy, Northwest A& F University, Yangling, Shaanxi 712100 (China); Innovation Experimental College, Northwest A& F University, Yangling, Shaanxi 712100 (China); Cao, Xiaoli; Shi, Shandang [State Key Laboratory of Crop Stress Biology for Arid Areas, College of Agronomy, Northwest A& F University, Yangling, Shaanxi 712100 (China); Ma, Yuling [State Key Laboratory of Crop Stress Biology for Arid Areas, College of Agronomy, Northwest A& F University, Yangling, Shaanxi 712100 (China); Innovation Experimental College, Northwest A& F University, Yangling, Shaanxi 712100 (China); Wang, Kai; Liu, Shengjie [State Key Laboratory of Crop Stress Biology for Arid Areas, College of Agronomy, Northwest A& F University, Yangling, Shaanxi 712100 (China); Chen, Dan [School of Life Sciences and Technology, Xidian University, Xi' an, Shaanxi 710071 (China); Chen, Qin [State Key Laboratory of Crop Stress Biology for Arid Areas, College of Agronomy, Northwest A& F University, Yangling, Shaanxi 712100 (China); Ma, Haoli, E-mail: mahaoli@nwsuaf.edu.cn [State Key Laboratory of Crop Stress Biology for Arid Areas, College of Agronomy, Northwest A& F University, Yangling, Shaanxi 712100 (China)

    2016-03-04

    The Auxin/indole-3-acetic acid (Aux/IAA) genes encode short-lived nuclear proteins that are known to be involved in the primary cellular responses to auxin. To date, systematic analysis of the Aux/IAA genes in potato (Solanum tuberosum) has not been conducted. In this study, a total of 26 potato Aux/IAA genes were identified (designated from StIAA1 to StIAA26), and the distribution of four conserved domains shared by the StIAAs were analyzed based on multiple sequence alignment and a motif-based sequence analysis. A phylogenetic analysis of the Aux/IAA gene families of potato and Arabidopsis was also conducted. In order to assess the roles of StIAA genes in tuber development, the results of RNA-seq studies were reformatted to analyze the expression patterns of StIAA genes, and then verified by quantitative real-time PCR. A large number of StIAA genes (12 genes) were highly expressed in stolon organs and in during the tuber initiation and expansion developmental stages, and most of these genes were responsive to indoleacetic acid treatment. Our results suggested that StIAA genes were involved in the process of tuber development and provided insights into functional roles of potato Aux/IAA genes. - Highlights: • A systematic analysis of the potato AUX/IAA gene family were performed. • StIAA genes were related to auxin perception and signal transduction. • Candidate StIAA genes likely related to tuber initiation and expansion were screened.

  10. Application of Nuclear Radiation to Textile Materials and Processes. Radiation-induced graft copolymerization of vinyl monomers and fibrous polymers; Applications des rayonnements aux textiles. Formation radiochimique de copolymeres ''greffes'' par l'action de monomeres vinyliques sur des polymeres en fibre; Primenenie yadernogo izlucheniya v tekstil'noj promyshlennosti. Obrazovanie privitykh sopolimerov iz vinilovykh monomerov i voloknistykh polimerov pod dejstviem izlucheniya; Aplicaciones de las radiaciones nucleares a los procesos y materiales textiles. Copolimerizacion por injerto radioinducida de monomeros vinilicos y de polimeros fibrosos

    Energy Technology Data Exchange (ETDEWEB)

    Armstrong, Jr., A. A.; Rutherford, H. A. [University of North Carolina at Raleigh, NC (United States)

    1963-11-15

    materials is not good enough for commercial acceptance. The strength of cellulose acetate yam, as well as the modulus, can be materially increased by the addition of polyacrylonitrile. Other monomers do not behave in this manner. There is some indication that the fibre may be improved with one compound, especially with respect to its behaviour in the wet state. Fibre modification by the procedure described might be practical commercially if techniques that will increase the rate of diffusion of the monomer into the fibre structure can be developed. (author) [French] Les auteurs ont mis au point une methode qui permet de realiser par les rayonnements un greffage homogene de monomeres vinyliques volatils sur des polymeres en fibres. Elle consiste a ajouter le compose organique en phase vapeur; on procede, soit par irradiation de l'ensemble, soit par irradiation prealable des polymeres, aux rayons du cobalt-60. Les auteurs ont etudie des systemes qui accelerent la formation des copolymeres ''greffes''; ils ont constate qu'il est possible d'ajouter des quantites significatives de plusieurs des monomeres sans qu'il en resulte de dommages radioinduits dans le substrat fibreux. Les polymeres en fibres relativement instables en presence des rayonnements sont ceux qui fixent le plus facilement les composes vinyliques. C'est le cas des matieres cellulosiques, des esters de cellulose, des polyamides et du polypropylene. Le monomere s'ajoute au substrat fibreux par un mecanisme de radicaux libres, et, comme on l'a indique plus haut, on peut irradier d'abord les polymeres et ensuite provoquer le greffage par exposition de la matiere irradiee S la vapeur du monomere. On a tente de determiner la duree de vie des radicaux libres; il est difficile de donner des chiffres exacts, mais on a demontre qu'ils peuvent subsister dans certaines fibres 15 a 20 heures apres l'irradiation, meme a la temperature ambiante. Des resultats experimentaux preliminaires donnent egalement a penser que le temps

  11. Matériaux architecturés pour refroidissement par transpiration : application aux chambres de combustion

    OpenAIRE

    Pinson , Sébastien

    2016-01-01

    In order to cool aero-engine combustion chambers as efficiently as possible, there is today a special interest given to transpiration cooling technology. The cooling air flows through a porous liner in which a large amount of heat can be exchanged by convection. The air injection could then take benefit of the pore distribution to form a more homogeneous protective boundary layer.Partially sintered metallic materials are potential candidates to form these porous liners. The present work focus...

  12. Modélisation et simulation d’une architecture d’entreprise - Application aux Smart Grids

    OpenAIRE

    SEGHIRI , Rachida

    2016-01-01

    In this thesis, we propose a framework that facilitates modeling Enterprise Architectures (EA) by automating analysis, prediction, and simulation, in order to address the key issue of business/IT alignment. We present our approach in the context of Smart Grids, which are power grids enabled with Information and Communication Technologies. Extensive studies try to foresee the impact of Smart Grids on electric components, telecommunication infrastructure, and industrial automation and IT. Howev...

  13. L'attachement émotionnel à une marque : application aux équipes sportives professionnelles de hockey

    OpenAIRE

    Zaaboub, Emna

    2017-01-01

    Le produit sport est envisagé comme l'un des rares produits qui procurent de la passion et de l'enthousiasme chez les individus. Les amateurs d'une équipe sportive vivent des réactions émotionnelles pour leurs équipes favorites, plus fortes dans l'industrie du sport comparativement à d'autres industries. Cette étude s'intéresse particulièrement à l'attachement émotionnel d'un individu à une équipe sportive. Il s'agit d'examiner les antécédents et conséquences de l'attachement émotionnel qu'un...

  14. The treatment of irradiated uranium fuel. Results obtained while operating the pilot plant at Fontenay-aux-Roses; Le traitement de l'uranium irradie. Resultats d'exploitation de l'usine-pilote de Fontenay-aux-Roses

    Energy Technology Data Exchange (ETDEWEB)

    Regnaut, P; Faugeras, P; Brut, A; Helou, R; Redon, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    In this paper the results obtained from four years operation of the pilot plant when using bars of increasing activity, are summarised and compared with the results of parallel studies carried out in the laboratory. As a conclusion to the article, the optimum conditions for the different phases of a process based on solvent extraction are given. (author)Fren. [French] Cette conference resume les resultats obtenus durant quatre annees de fonctionnement de l'Usine-Pilote, avec des barreaux d'activite croissante et les compare aux resultats d'etudes conduites parallelement en laboratoire. En conclusion sont donnees les conditions optima pour les differentes phases d'un procede base sur l'extraction par solvant. (auteur)

  15. Resenha de: Recherches sur les effectifs des armées françaises des Guerres d'Italie aux Guerres de Religion

    Directory of Open Access Journals (Sweden)

    Eurípedes Simões de Paula

    1963-12-01

    Full Text Available LOT, Ferdinand. Recherches sur les effectifs des armées fran-çaises des Guerres d'Italie aux Guerres de Religion. Paris. S. E. V. P. E. N. École Pratique des Hautes Études. VIe Sec-tion. Collection Bibliothèque Générale.

  16. Sabine Dullin. La frontière épaisse: Aux origines des politiques soviétiques (1920-1940

    Directory of Open Access Journals (Sweden)

    Andrea Chandler

    2016-09-01

    Full Text Available Sabine Dullin. La frontière épaisse: Aux origines des politiques soviétiques (1920-1940. En temps & lieux 55. Paris: Éditions de l'École des hautes études en sciences sociales, 2014. 356 pp. Illustrations. Maps. Tables. Bibliography. Index of places. Index of names. Paper.

  17. Droit et accès des femmes à l'eau et aux systèmes d'assainissement ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2 mai 2012 ... Axe de recherche Le projet vise à améliorer les services d'approvisionnement en eau et d'assainissement fournis aux femmes vivant dans les collectivités à faible revenu de New Delhi, de même qu'à favoriser de meilleurs rapports entre les habitants et les administrations locales.

  18. Le vocabulaire de la maison privée aux xviie et xviiie siècles

    OpenAIRE

    Hanna, Nelly

    2008-01-01

    Depuis déjà un certain temps, les chercheurs qui travaillent sur l'habitat du Caire utilisent des fonds d'archives de différentes époques. Je signale en particulier les travaux de Jean-Claude Garcin, de Mona Zakariya et de Hazem-al-Sayyed. Le travail d'archives pose des problèmes liés au vocabulaire des éléments architecturaux, celui-ci étant sensiblement différent de celui qu'on utilise aujourd'hui. C'est grâce aux travaux de 'Adbul-Latif Ibrahim que ce domaine a commencé d'être exploité et ...

  19. Etude systématique et écologique de la faune associée aux moules ()

    OpenAIRE

    Fezzani, S.; Zghal, F.; Ben Amor, Z.; El Abed, A.

    2001-01-01

    Ce travail s’intéresse non seulement à la connaissance de la faune associée aux moules notamment : Mytilus galloprovincialis, mais aussi à une étude systématique et écologique de la faune récoltée. Cette étude a été réalisée dans le lac de Bizerte, à la station de mytiliculture de Menzel Jemil. Une partie de ce travail est consacrée à un examen systématique de la faune récoltée et qui nous a permis d’inventorier 6 embranchements dont les annélides qui sont représentés par 10 espèces de Po...

  20. Health physics around a controlled fusion research device: the Tokamak at Fontenay-aux-Roses (T.F.R.)

    International Nuclear Information System (INIS)

    1977-01-01

    The X and neutron dosimetry measurement near the magnetic confinement device for hot plasma, called T.F.R. (Tokamak, Fontenay-aux-Roses) are presented. The biological shielding consists of an ordinary concrete wall 30 cm thick; the dose rate is thus limited at 10 -1 mrem per discharge (corresponding to 10 mrem per day) in the whole area frequented by people during T.F.R. operation. A numerical calculation, taking into account the true geometry and X ray reflexion by the walls and roof, and normalized to the measurements, gives some indications on the electron beam which produces X rays. The photoneutron source (up to 10 10 neutrons per dischage) and the activation of the vacuum vessel result from high energy electrons (>= 10 MeV) supporting a 10 to 1,000 A current [fr