WorldWideScience

Sample records for boresight adjustment mechanism

  1. Flying Boresight for Advanced Testing and Calibration of Tracking Antennas and Flight Path Simulations

    Science.gov (United States)

    Hafner, D.

    2015-09-01

    The application of ground-based boresight sources for calibration and testing of tracking antennas usually entails various difficulties, mostly due to unwanted ground effects. To avoid this problem, DLR MORABA developed a small, lightweight, frequency-adjustable S-band boresight source, mounted on a small remote-controlled multirotor aircraft. Highly accurate GPS-supported, position and altitude control functions allow both, very steady positioning of the aircraft in mid-air, and precise waypoint-based, semi-autonomous flights. In contrast to fixed near-ground boresight sources this flying setup enables to avoid obstructions in the Fresnel zone between source and antenna. Further, it minimizes ground reflections and other multipath effects which can affect antenna calibration. In addition, the large operating range of a flying boresight simplifies measurements in the far field of the antenna and permits undisturbed antenna pattern tests. A unique application is the realistic simulation of sophisticated flight paths, including overhead tracking and demanding trajectories of fast objects such as sounding rockets. Likewise, dynamic tracking tests are feasible which provide crucial information about the antenna pedestal performance — particularly at high elevations — and reveal weaknesses in the autotrack control loop of tracking antenna systems. During acceptance tests of MORABA's new tracking antennas, a manned aircraft was never used, since the Flying Boresight surpassed all expectations regarding usability, efficiency, and precision. Hence, it became an integral part of MORABA's standard antenna setup and calibration procedures.

  2. Measurement of Antenna Bore-Sight Gain

    Science.gov (United States)

    Fortinberry, Jarrod; Shumpert, Thomas H.

    2016-01-01

    The absolute or free-field gain of a simple antenna can be approximated using standard antenna theory formulae or for a more accurate prediction, numerical methods may be employed to solve for antenna parameters including gain. Both of these methods will result in relatively reasonable estimates but in practice antenna gain is usually verified and documented via measurements and calibration. In this paper, a relatively simple and low-cost, yet effective means of determining the bore-sight free-field gain of a VHF/UHF antenna is proposed by using the Brewster angle relationship.

  3. Mechanism of laser micro-adjustment

    International Nuclear Information System (INIS)

    Shen Hong

    2008-01-01

    Miniaturization is a requirement in engineering to produce competitive products in the field of optical and electronic industries. Laser micro-adjustment is a new and promising technology for sheet metal actuator systems. Efforts have been made to understand the mechanisms of metal plate forming using a laser heating source. Three mechanisms have been proposed for describing the laser forming processes in different scenarios, namely the temperature gradient mechanism (TGM), buckling mechanism and upsetting mechanism (UM). However, none of these mechanisms can fully describe the deformation mechanisms involved in laser micro-adjustment. Based on the thermal and elastoplastic analyses, a coupled TGM and UM are presented in this paper to illustrate the thermal mechanical behaviours of two-bridge actuators when applying a laser forming process. To validate the proposed coupling mechanism, numerical simulations are carried out and the corresponding results demonstrate the mechanism proposed. The mechanism of the micro-laser adjustment could be taken as a supplement to the laser forming process.

  4. Kinematic synthesis of adjustable robotic mechanisms

    Science.gov (United States)

    Chuenchom, Thatchai

    1993-01-01

    Conventional hard automation, such as a linkage-based or a cam-driven system, provides high speed capability and repeatability but not the flexibility required in many industrial applications. The conventional mechanisms, that are typically single-degree-of-freedom systems, are being increasingly replaced by multi-degree-of-freedom multi-actuators driven by logic controllers. Although this new trend in sophistication provides greatly enhanced flexibility, there are many instances where the flexibility needs are exaggerated and the associated complexity is unnecessary. Traditional mechanism-based hard automation, on the other hand, neither can fulfill multi-task requirements nor are cost-effective mainly due to lack of methods and tools to design-in flexibility. This dissertation attempts to bridge this technological gap by developing Adjustable Robotic Mechanisms (ARM's) or 'programmable mechanisms' as a middle ground between high speed hard automation and expensive serial jointed-arm robots. This research introduces the concept of adjustable robotic mechanisms towards cost-effective manufacturing automation. A generalized analytical synthesis technique has been developed to support the computational design of ARM's that lays the theoretical foundation for synthesis of adjustable mechanisms. The synthesis method developed in this dissertation, called generalized adjustable dyad and triad synthesis, advances the well-known Burmester theory in kinematics to a new level. While this method provides planar solutions, a novel patented scheme is utilized for converting prescribed three-dimensional motion specifications into sets of planar projections. This provides an analytical and a computational tool for designing adjustable mechanisms that satisfy multiple sets of three-dimensional motion specifications. Several design issues were addressed, including adjustable parameter identification, branching defect, and mechanical errors. An efficient mathematical scheme for

  5. Controlling chaos based on an adaptive adjustment mechanism

    International Nuclear Information System (INIS)

    Zheng Yongai

    2006-01-01

    In this paper, we extend the ideas and techniques developed by Huang [Huang W. Stabilizing nonlinear dynamical systems by an adaptive adjustment mechanism. Phys Rev E 2000;61:R1012-5] for controlling discrete-time chaotic system using adaptive adjustment mechanism to continuous-time chaotic system. Two control approaches, namely adaptive adjustment mechanism (AAM) and modified adaptive adjustment mechanism (MAAM), are investigated. In both case sufficient conditions for the stabilization of chaotic systems are given analytically. The simulation results on Chen chaotic system have verified the effectiveness of the proposed techniques

  6. Ergodic Capacity Analysis of Free-Space Optical Links with Nonzero Boresight Pointing Errors

    KAUST Repository

    Ansari, Imran Shafique; Alouini, Mohamed-Slim; Cheng, Julian

    2015-01-01

    A unified capacity analysis of a free-space optical (FSO) link that accounts for nonzero boresight pointing errors and both types of detection techniques (i.e. intensity modulation/ direct detection as well as heterodyne detection) is addressed

  7. LABOUR MOBILITY AS AN ADJUSTMENT MECHANISM IN THE EURO AREA

    Directory of Open Access Journals (Sweden)

    Cristina Puiu

    2011-12-01

    Full Text Available The aim of this paper is to assess the capacity of labour mobility in the euro area to act as an adjustment mechanism in the event of an asymmetric shock. According to the optimum currency area theory, labour mobility has been emphasized as one of the main adjustment mechanism. Given the present situation, where there are major concerns about the future of the euro area, it is necessary to study if the mechanism for stability works and if it can be improved. Considering the difficulty of quantifying the labour mobility, we have analyzed the net migration and the regulations regarding labour market. The empirical evidence shows that labour mobility does not act as a sufficient adjustment mechanism.

  8. Mechanical design of a power-adjustable spectacle lens frame.

    Science.gov (United States)

    Zapata, Asuncion; Barbero, Sergio

    2011-05-01

    Power-adjustable spectacle lenses, based on the Alvarez-Lohmann principle, can be used to provide affordable spectacles for subjective refractive errors measurement and its correction. A new mechanical frame has been designed to maximize the advantages of this technology. The design includes a mechanism to match the interpupillary distance with that of the optical centers of the lenses. The frame can be manufactured using low cost plastic injection molding techniques. A prototype has been built to test the functioning of this mechanical design.

  9. Toward High Altitude Airship Ground-Based Boresight Calibration of Hyperspectral Pushbroom Imaging Sensors

    Directory of Open Access Journals (Sweden)

    Aiwu Zhang

    2015-12-01

    Full Text Available The complexity of the single linear hyperspectral pushbroom imaging based on a high altitude airship (HAA without a three-axis stabilized platform is much more than that based on the spaceborne and airborne. Due to the effects of air pressure, temperature and airflow, the large pitch and roll angles tend to appear frequently that create pushbroom images highly characterized with severe geometric distortions. Thus, the in-flight calibration procedure is not appropriate to apply to the single linear pushbroom sensors on HAA having no three-axis stabilized platform. In order to address this problem, a new ground-based boresight calibration method is proposed. Firstly, a coordinate’s transformation model is developed for direct georeferencing (DG of the linear imaging sensor, and then the linear error equation is derived from it by using the Taylor expansion formula. Secondly, the boresight misalignments are worked out by using iterative least squares method with few ground control points (GCPs and ground-based side-scanning experiments. The proposed method is demonstrated by three sets of experiments: (i the stability and reliability of the method is verified through simulation-based experiments; (ii the boresight calibration is performed using ground-based experiments; and (iii the validation is done by applying on the orthorectification of the real hyperspectral pushbroom images from a HAA Earth observation payload system developed by our research team—“LanTianHao”. The test results show that the proposed boresight calibration approach significantly improves the quality of georeferencing by reducing the geometric distortions caused by boresight misalignments to the minimum level.

  10. Personality, emotional adjustment, and cardiovascular risk: marriage as a mechanism.

    Science.gov (United States)

    Smith, Timothy W; Baron, Carolynne E; Grove, Jeremy L

    2014-12-01

    A variety of aspects of personality and emotional adjustment predict the development and course of coronary heart disease (CHD), as do indications of marital quality (e.g., satisfaction, conflict, strain, disruption). Importantly, the personality traits and aspects of emotional adjustment that predict CHD are also related to marital quality. In such instances of correlated risk factors, traditional epidemiological and clinical research typically either ignores the potentially overlapping effects or examines independent associations through statistical controls, approaches that can misrepresent the key components and mechanisms of psychosocial effects on CHD. The interpersonal perspective in personality and clinical psychology provides an alternative and integrative approach, through its structural and process models of interpersonal behavior. We present this perspective on psychosocial risk and review research on its application to the integration of personality, emotional adjustment, and marital processes as closely interrelated influences on health and disease. © 2013 Wiley Periodicals, Inc.

  11. Balance of payments adjustment mechanisms in the Euro area

    Directory of Open Access Journals (Sweden)

    Pavel HNÁT

    2012-06-01

    Full Text Available The article aims at analysing the current situation in the Euro area with respect to the balance of payments adjustment mechanism that should normally be at place. Internally, the Euro area membership represents a combination of the fixed exchange rate, capital mobility and no monetary policy autonomy; externally, the Euro area countries apply floating exchange rates with high capital mobility, and autonomous monetary policy. Member states thus cannot use the monetary instruments to prevent external influences; they can only use fiscal policies, which are limited by the Stability and Growth Pact and debt constraint. When external imbalance occurs (such as today, the economies of member states are exposed to the price and income adjustment processes as well as to their own fiscal and ECB policy impacts. This article shows that all these factors interfere and influence real effects of automatic adjustment mechanisms which in some cases cannot come forth at all. Factors within domestic economic policies that limit the restoration of external balance within the Euro area thus create an important outcome of this paper.

  12. Research Facility for Mechanical Press Closed Gap Adjuster

    Directory of Open Access Journals (Sweden)

    A. A. Ancifirov

    2016-01-01

    Full Text Available The article describes an example of the research facility for closed gap adjustment mechanism based on the KD2128 closed-die forging press. Its rated force with a servo drive used is 630kN. The servo drive consists of a motor with nominal power of 1.57kW and a frequency converter with power of 7.5kW, which has functions of the programmable logic controller.The article notes that such a facility is expedient and useful for practical classes on forging-andstamping machines at the BMSTU Department of «Technology processing by pressure» to demonstrate the capabilities of existing technological facility, learn a design of forging-andstamping machine units, solve the problems of automatic control, monitoring, and diagnostics in blank manufacturing.The article presents a detailed facility diagram of the closed gap adjustment mechanism and its photograph, describes the mechanism and its basic parameters, gives characteristics of the synchronous motor to drive the mechanism, reviews practical works, which the research facility may provide.Based on the four experiments the article estimates an efficiency of the research facilityuse under consideration, especially when modeling a servo motor shaft under the maximum load. The relevant diagrams confirm experimental results, namely: control current, angle of motor shaft and its speed versus time. Thus, upon the diagram analysis it can be noted that the research facility design allows providing kinematics and dynamics of the press closed gap adjuster.This article describes how to determine the closed gap adjusting accuracy of the press. Eight experiments have been conducted to evaluate a working out control signal to the linear movement of the press punch when using the research facility. It is noted that the linear positioning accuracy of the press punch reaches the hundredth parts of a millimeter of the adjustment value that is sufficient to achieve the required precision when performing operations such as

  13. Demographic mechanisms of inbreeding adjustment through extra-pair reproduction.

    Science.gov (United States)

    Reid, Jane M; Duthie, A Bradley; Wolak, Matthew E; Arcese, Peter

    2015-07-01

    One hypothesis explaining extra-pair reproduction is that socially monogamous females mate with extra-pair males to adjust the coefficient of inbreeding (f) of extra-pair offspring (EPO) relative to that of within-pair offspring (WPO) they would produce with their socially paired male. Such adjustment of offspring f requires non-random extra-pair reproduction with respect to relatedness, which is in turn often assumed to require some mechanism of explicit pre-copulatory or post-copulatory kin discrimination. We propose three demographic processes that could potentially cause mean f to differ between individual females' EPO and WPO given random extra-pair reproduction with available males without necessarily requiring explicit kin discrimination. Specifically, such a difference could arise if social pairings formed non-randomly with respect to relatedness or persisted non-randomly with respect to relatedness, or if the distribution of relatedness between females and their sets of potential mates changed during the period through which social pairings persisted. We used comprehensive pedigree and pairing data from free-living song sparrows (Melospiza melodia) to quantify these three processes and hence investigate how individual females could adjust mean offspring f through instantaneously random extra-pair reproduction. Female song sparrows tended to form social pairings with unrelated or distantly related males slightly less frequently than expected given random pairing within the defined set of available males. Furthermore, social pairings between more closely related mates tended to be more likely to persist across years than social pairings between less closely related mates. However, these effects were small and the mean relatedness between females and their sets of potential extra-pair males did not change substantially across the years through which social pairings persisted. Our framework and analyses illustrate how demographic and social structuring within

  14. Study on a mechanical snubber with an adjustment mechanism for resisting force

    International Nuclear Information System (INIS)

    Ohmata, Kenichiro; Miyanaga, Hiroyuki.

    1991-01-01

    The mechanical snubber is an earthquakeproof device for a piping system under particular circumstances such as high temperature and radioactivity. It restrains the piping system by a strong resisting force during an earthquake. This strong force can cause elastic failure of grooves on a brake disk, where steel balls are placed. In this report, an improved mechanical snubber having an adjustment mechanism for resisting force is proposed in order to obtain a mechanical snubber which has almost the same restraint effect and less resisting force in comparison with a conventional mechanical snubber. The resisting force characteristics and the restraint effect of the improved mechanical snubber applied to a simple beam are discussed both numerically and experimentally. The digital simulations are carried out using the Continuous System Simulation Language (CSSL). (author)

  15. Ergodic Capacity Analysis of Free-Space Optical Links with Nonzero Boresight Pointing Errors

    KAUST Repository

    Ansari, Imran Shafique

    2015-04-01

    A unified capacity analysis of a free-space optical (FSO) link that accounts for nonzero boresight pointing errors and both types of detection techniques (i.e. intensity modulation/ direct detection as well as heterodyne detection) is addressed in this work. More specifically, an exact closed-form expression for the moments of the end-to-end signal-to-noise ratio (SNR) of a single link FSO transmission system is presented in terms of well-known elementary functions. Capitalizing on these new moments expressions, we present approximate and simple closedform results for the ergodic capacity at high and low SNR regimes. All the presented results are verified via computer-based Monte-Carlo simulations.

  16. The Mechanical Design of a Kinematic Mount for the Mid Infrared Instrument Focal Plane Module on the James Webb Space Telescope

    Science.gov (United States)

    Thelen, Michael P.; Moore, Donald M.

    2009-01-01

    The detector assembly for the Mid Infrared Instrument (MIRI) of the James Webb Space Telescope (JWST) is mechanically supported in the Focal Plane Module (FPM) Assembly with an efficient hexapod design. The kinematic mount design allows for precision adjustment of the detector boresight to assembly alignment fiducials and maintains optical alignment requirements during flight conditions of launch and cryogenic operations below 7 Kelvin. This kinematic mounting technique is able to be implemented in a variety of optical-mechanical designs and is capable of micron level adjustment control and stability over wide dynamic and temperature ranges.

  17. Asymmetric cell division requires specific mechanisms for adjusting global transcription.

    Science.gov (United States)

    Mena, Adriana; Medina, Daniel A; García-Martínez, José; Begley, Victoria; Singh, Abhyudai; Chávez, Sebastián; Muñoz-Centeno, Mari C; Pérez-Ortín, José E

    2017-12-01

    Most cells divide symmetrically into two approximately identical cells. There are many examples, however, of asymmetric cell division that can generate sibling cell size differences. Whereas physical asymmetric division mechanisms and cell fate consequences have been investigated, the specific problem caused by asymmetric division at the transcription level has not yet been addressed. In symmetrically dividing cells the nascent transcription rate increases in parallel to cell volume to compensate it by keeping the actual mRNA synthesis rate constant. This cannot apply to the yeast Saccharomyces cerevisiae, where this mechanism would provoke a never-ending increasing mRNA synthesis rate in smaller daughter cells. We show here that, contrarily to other eukaryotes with symmetric division, budding yeast keeps the nascent transcription rates of its RNA polymerases constant and increases mRNA stability. This control on RNA pol II-dependent transcription rate is obtained by controlling the cellular concentration of this enzyme. © The Author(s) 2017. Published by Oxford University Press on behalf of Nucleic Acids Research.

  18. Net lost revenue adjustment (NLRA) mechanisms for utility DSM programs

    International Nuclear Information System (INIS)

    Baxter, L.W.

    1995-01-01

    We examine the experiences that states and utilities are having with the NLRA approach. Contrary to concerns raised by some industry analysts, our results indicate the NLRA is a feasible approach to the lost-revenue disincentive. Seven of the 10 states we studied report no substantial problems with their approach. We observe several conditions linked to effective NLRA implementation and, for those states reporting problems, conditions linked to implementation difficulties. Finally, observed changes in utility-investment behavior occur after implementation of DSM rate reforms, which include deployment of NLRA mechanisms. We find that utilities in states with lost revenue recovery invest more than twice as much in DSM as do utilities in other states. (Author)

  19. Positioning accuracy analysis of adjusting target mechanism of three-dimensional attitude

    International Nuclear Information System (INIS)

    Ma Li; Wang Kun; Sun Linzhi; Zhou Shasha

    2012-01-01

    A novel adjusting target mechanism of three-dimensional attitude is presented according to the characteristics of the target transport subsystem in inertial confinement fusion (ICF). The mechanism consists of a tangent mechanism adjusting rotation angle and a set of orthogonal tangent mechanism adjusting two-dimensional deflection angles. The structural parameters of the adjusting target mechanism are analyzed according to principle errors, structure errors and motion errors of following. The analysis results indicate that the system error of the adjusting target mechanism is influenced by the displacement of the linear actuators, the actuator ball radius, the working radius of the tangent mechanism, the angle error of the inclined installation hole, the centralization error of the actuators, the orthogonal error of the two tangent mechanism, and the angle errors of the inclined target rod inclined rotation shaft. The errors of the inclined target rod and inclined rotation shaft are the two greatest impact factors, the spherical contact error is the next. By means of precise assembly and control system compensation, the accuracy of the adjusting target mechanism can be less than 0.1 mrad. (authors)

  20. SIMO optical wireless links with nonzero boresight pointing errors over M modeled turbulence channels

    Science.gov (United States)

    Varotsos, G. K.; Nistazakis, H. E.; Petkovic, M. I.; Djordjevic, G. T.; Tombras, G. S.

    2017-11-01

    Over the last years terrestrial free-space optical (FSO) communication systems have demonstrated an increasing scientific and commercial interest in response to the growing demands for ultra high bandwidth, cost-effective and secure wireless data transmissions. However, due the signal propagation through the atmosphere, the performance of such links depends strongly on the atmospheric conditions such as weather phenomena and turbulence effect. Additionally, their operation is affected significantly by the pointing errors effect which is caused by the misalignment of the optical beam between the transmitter and the receiver. In order to address this significant performance degradation, several statistical models have been proposed, while particular attention has been also given to diversity methods. Here, the turbulence-induced fading of the received optical signal irradiance is studied through the M (alaga) distribution, which is an accurate model suitable for weak to strong turbulence conditions and unifies most of the well-known, previously emerged models. Thus, taking into account the atmospheric turbulence conditions along with the pointing errors effect with nonzero boresight and the modulation technique that is used, we derive mathematical expressions for the estimation of the average bit error rate performance for SIMO FSO links. Finally, proper numerical results are given to verify our derived expressions and Monte Carlo simulations are also provided to further validate the accuracy of the analysis proposed and the obtained mathematical expressions.

  1. Dealing with friction in a reusable 6 degrees of freedom adjustment mechanism with sliding contacts

    NARCIS (Netherlands)

    Klinkhamer, J.F.F.

    2003-01-01

    Although the possibility of a 6 degrees of freedom adjustment based on a single body pulled onto on six adjustable supports follows directly from the kinematic theory, such mechanisms are seldom used in actual products. Two major drawbacks for the use of this solution are: Due to the sliding contact

  2. An Approach to Implementing A Threshold Adjusting Mechanism in Very Complex Negotiations : A Preliminary Result

    OpenAIRE

    Fujita, Katsuhide; Ito, Takayuki; Hattori, Hiromitsu; Klein, Mark

    2007-01-01

    In this paper, we propose a threshold adjusting mechanism in very complex negotiations among software agents. The proposed mechanism can facilitate agents to reach an agreement while keeping their private information as much as possible. Multi-issue negotiation protocols have been studied widely and represent a promising field since most negotiation problems in the real world involve interdependent multiple issues. We have proposed negotiation protocols where a bidding-based mechanism is used...

  3. Design amp Validation Of E-Rpm Adjustment Assembly For Mechanical Governor System

    Directory of Open Access Journals (Sweden)

    Shashi kumar manhotra

    2017-11-01

    Full Text Available This paper detailing the problem of speed fluctuation of IDI engine Rpm i.e. hunting and dipping. It is due to E-RPM adjustment assembly for mechanical centrifugal flyweight governor system. E-RPM adjustment assembly works mainly for high speed adjustment ampidle speed adjustment. In mechanical centrifugal flyweight governor system of IDI engine issue at idle rpm hunting and dipping issue was reported in field.New designs of plunger type stopper cover with compressed coil spring are proposed for E-RPM adjustment assembly for mechanical centrifugal fly-weight governor system. 3D-Modeling of new design is done on Seimens NX. Kinematic simulation was done with the help of Altairs Motion-View amp Motion-Solver. Based on the results from MBD the prototype is made and tested in engine. As per the test results from engine testing with new design there is no hunting and dipping problem is reported at idle rpm.

  4. Risk-adjusted survival after tissue versus mechanical aortic valve replacement: a 23-year assessment.

    Science.gov (United States)

    Gaca, Jeffrey G; Clare, Robert M; Rankin, J Scott; Daneshmand, Mani A; Milano, Carmelo A; Hughes, G Chad; Wolfe, Walter G; Glower, Donald D; Smith, Peter K

    2013-11-01

    Detailed analyses of risk-adjusted outcomes after mitral valve surgery have documented significant survival decrements with tissue valves at any age. Several recent studies of prosthetic aortic valve replacement (AVR) also have suggested a poorer performance of tissue valves, although analyses have been limited to small matched series. The study aim was to test the hypothesis that AVR with tissue valves is associated with a lower risk-adjusted survival, as compared to mechanical valves. Between 1986 and 2009, primary isolated AVR, with or without coronary artery bypass grafting (CABG), was performed with currently available valve types in 2148 patients (1108 tissue valves, 1040 mechanical). Patients were selected for tissue valves to be used primarily in the elderly. Baseline and operative characteristics were documented prospectively with a consistent variable set over the entire 23-year period. Follow up was obtained with mailed questionnaires, supplemented by National Death Index searches. The average time to death or follow up was seven years, and follow up for survival was 96.2% complete. Risk-adjusted survival characteristics for the two groups were evaluated using a Cox proportional hazards model with stepwise selection of candidate variables. Differences in baseline characteristics between groups were (tissue versus mechanical): median age 73 versus 61 years; non-elective surgery 32% versus 28%; CABG 45% versus 35%; median ejection fraction 55% versus 55%; renal failure 6% versus 1%; diabetes 18% versus 7% (pvalves; however, after risk adjustment for the adverse profiles of tissue valve patients, no significant difference was observed in survival after tissue or mechanical AVR. Thus, the hypothesis did not hold, and risk-adjusted survival was equivalent, of course qualified by the fact that selection bias was evident. With selection criteria that employed tissue AVR more frequently in elderly patients, tissue and mechanical valves achieved similar survival

  5. Modeling and Control of the Redundant Parallel Adjustment Mechanism on a Deployable Antenna Panel

    Directory of Open Access Journals (Sweden)

    Lili Tian

    2016-10-01

    Full Text Available With the aim of developing multiple input and multiple output (MIMO coupling systems with a redundant parallel adjustment mechanism on the deployable antenna panel, a structural control integrated design methodology is proposed in this paper. Firstly, the modal information from the finite element model of the structure of the antenna panel is extracted, and then the mathematical model is established with the Hamilton principle; Secondly, the discrete Linear Quadratic Regulator (LQR controller is added to the model in order to control the actuators and adjust the shape of the panel. Finally, the engineering practicality of the modeling and control method based on finite element analysis simulation is verified.

  6. [Neurally adjusted ventilatory assist (NAVA). A new mode of assisted mechanical ventilation].

    Science.gov (United States)

    Moerer, O; Barwing, J; Quintel, M

    2008-10-01

    The aim of mechanical ventilation is to assure gas exchange while efficiently unloading the respiratory muscles and mechanical ventilation is an integral part of the care of patients with acute respiratory failure. Modern lung protective strategies of mechanical ventilation include low-tidal-volume ventilation and the continuation of spontaneous breathing which has been shown to be beneficial in reducing atelectasis and improving oxygenation. Poor patient-ventilator interaction is a major issue during conventional assisted ventilation. Neurally adjusted ventilator assist (NAVA) is a new mode of mechanical ventilation that uses the electrical activity of the diaphragm (EAdi) to control the ventilator. First experimental studies showed an improved patient-ventilator synchrony and an efficient unloading of the respiratory muscles. Future clinical studies will have to show that NAVA is of clinical advantage when compared to conventional modes of assisted mechanical ventilation. This review characterizes NAVA according to current publications on this topic.

  7. Radon mitigation with mechanical supply and exhaust ventilation adjusted by a pressure control unit

    International Nuclear Information System (INIS)

    Kokotti, H.; Keskikuru, T.; Kalliokoski, P.

    1993-01-01

    Effective ventilation and positive or low negative pressure indoors are suggested to low indoor radon levels. The aim of this study is to develop and to test an equipment, which makes it possible to achieve simultaneously effective ventilation and minimum outdoor-pressure difference. The unit includes mechanical supply and exhaust air fans, a exchanger and a pressure control unit in direct digital control (DDC), which adjusts continuously air exchange based on the pressure difference transmitter information. (orig.). (8 refs., 6 figs.)

  8. A fine adjustment mechanism of the second crystal in a double-crystal monochromator with a 3-PS parallel manipulator

    International Nuclear Information System (INIS)

    Cao Chongzhen; Gao, X.; Ma, P.; Yu, H.; Wang, F.; Huang, Y.; Liu, P.

    2005-01-01

    A novel fine adjustment mechanism of the second crystal in a double-crystal monochromator is put forward, which is based on a 3-PS parallel manipulator and the magnetic force. Not only is the principle of fine adjusting the pitch angle and the roll angle analyzed, but also optimization of the structure parameters of the permanent magnet, a key part of the fine adjustment mechanism. The fine adjustment mechanism with the 3-PS parallel manipulator has been applied successfully in the double-crystal monochromator of 4W1B beam line in the Beijing Synchrotron Radiation Facility (BSRF)

  9. A simple mechanism for measuring and adjusting distraction forces during maxillary advancement.

    Science.gov (United States)

    Suzuki, Eduardo Yugo; Suzuki, Boonsiva

    2009-10-01

    Direct measurement of distraction forces on the craniofacial skeleton has never been reported. The present report describes the development of a method of assessing and adjusting traction forces applied through maxillary distraction osteogenesis. A simple mechanism to measure and adjust tension force during maxillary distraction osteogenesis was developed and connected bilaterally to the traction screws of a rigid external distraction device. Measurements were carried out before and after activation using a Shimpo (Nidec-Shimpo America Corporation, Itasca, IL) force gauge in 4 patients (2 with unilateral cleft lip and/or palate, 1 with bilateral cleft lip and palate, and 1 with noncleft) during the distraction process. Activation was performed twice a day at a rate of 1 mm/day. The average maximum force applied throughout the distraction period was 42.5 N (range 16.4 to 65.3 N), with increments, after activation, averaging 10.5 N (range 7.9 to 15.7 N). In patients with unilateral cleft lip and/or palate, distraction forces on the larger segment were 65.1% higher than on the lesser segment. A differential pattern of forces was also observed in the patients with asymmetric noncleft. However, the differential forces between lateral segments were not observed in the patient with bilateral cleft lip and palate. During the activation period, distraction forces progressively increased, whereas the amount of maxillary movement decreased. Pain and discomfort were reported with high forces. Through this mechanism, direct measurement and adjustment of distraction forces during maxillary advancement was possible. The unbalanced pattern of forces observed in patients with cleft suggests the necessity of individual adjustments for controlling pain and clinical symptoms. Accordingly, assessment of distraction forces during maxillary distraction osteogenesis is extremely helpful in understanding the biomechanics of the distraction process.

  10. A New and Versatile Adjustable Rigidity Actuator with Add-on Locking Mechanism (ARES-XL

    Directory of Open Access Journals (Sweden)

    Manuel Cestari

    2018-01-01

    Full Text Available Adjustable compliant actuators are being designed and implemented in robotic devices because of their ability to minimize large forces due to impacts, to safely interact with the user, and to store and release energy in passive elastic elements. Conceived as a new force-controlled compliant actuator, an adjustable rigidity with embedded sensor and locking mechanism actuator (ARES-XL is presented in this paper. This compliant system is intended to be implemented in a gait exoskeleton for children with neuro muscular diseases (NMDs to exploit the intrinsic dynamics during locomotion. This paper describes the mechanics and initial evaluation of the ARES-XL, a novel variable impedance actuator (VIA that allows the implementation of an add-on locking mechanism to this system, and in combination with its zero stiffness capability and large deflection range, provides this novel joint with improved properties when compared to previous prototypes developed by the authors and other state-of-the-art (SoA devices. The evaluation of the system proves how this design exceeds the main capabilities of a previous prototype as well as providing versatile actuation that could lead to its implementation in multiple joints.

  11. Modeling and Dynamic Simulation of the Adjust and Control System Mechanism for Reactor CAREM-25

    International Nuclear Information System (INIS)

    Larreteguy, A.E; Mazufri, C.M

    2000-01-01

    The adjust and control system mechanism, MSAC, is an advanced, and in some senses unique, hydromechanical device.The efforts in modeling this mechanism are aimed to: Get a deep understanding of the physical phenomena involved,Identify the set of parameters relevant to the dynamics of the system,Allow the numerical simulation of the system,Predict the behavior of the mechanism in conditions other than that obtainable within the range of operation of the experimental setup (CEM), and Help in defining the design of the CAPEM (loop for testing the mechanism under high pressure/high temperature conditions).Thanks to the close interaction between the mechanics, the experimenters, and the modelists that compose the MSAC task force, it has been possible to suggest improvements, not only in the design of the mechanism, but also in the design and the operation of the pulse generator (GDP) and the rest of the CEM.This effort has led to a design mature enough so as to be tested in a high-pressure loop

  12. Assessment of net lost revenue adjustment mechanisms for utility DSM programs

    Energy Technology Data Exchange (ETDEWEB)

    Baxter, L.W.

    1995-01-01

    Utility shareholders can lose money on demand-side management (DSM) investments between rate cases. Several industry analysts argue that the revenues lost from utility DSM programs are an important financial disincentive to utility DSM investment. A key utility regulatory reform undertaken since 1989 allows utilities to recover the lost revenues incurred through successful operation of DSM programs. Explicitly defined net lost revenue adjustment (NLRA) mechanisms are states` preferred approach to lost revenue recovery from DSM programs. This report examines the experiences states and utilities are having with the NLRA approach. The report has three objectives. First, we determine whether NLRA is a feasible and successful approach to removing the lost-revenue disincentive to utility operation of DSM programs. Second, we identify the conditions linked to successful implementation of NLRA mechanisms in different states and assess whether NLRA has changed utility investment behavior. Third, we suggest improvements to NLRA mechanisms. We first identify states with NLRA mechanisms where utilities are recovering lost revenues from DSM programs. We interview staff at regulatory agencies in all these states and utility staff in four states. These interviews focus on the status of NLRA, implementation issues, DSM measurement issues, and NLRA results. We also analyze regulatory agency orders on NLRA, as well as associated testimony, reports, and utility lost revenue recovery filings. Finally, we use qualitative and quantitative indicators to assess NLRA`s effectiveness. Contrary to the concerns raised by some industry analysts, our results indicate NLRA is a feasible approach to the lost-revenue disincentive.

  13. The Newton constant and gravitational waves in some vector field adjusting mechanisms

    Energy Technology Data Exchange (ETDEWEB)

    Santillán, Osvaldo P. [IMAS (UBA-CONICET), Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires, Ciudad Universitaria, Buenos Aires 1428 (Argentina); Scornavacche, Marina, E-mail: firenzecita@hotmail.com, E-mail: marina.scorna@hotmail.com [Departamento de Física, Universidad de Buenos Aires, Ciudad Universitaria, Buenos Aires 1428 (Argentina)

    2017-10-01

    At the present, there exist some Lorentz breaking scenarios which explain the smallness of the cosmological constant at the present era [1]–[2]. An important aspect to analyze is the propagation of gravitational waves and the screening or enhancement of the Newton constant G {sub N} in these models. The problem is that the Lorentz symmetry breaking terms may induce an unacceptable value of the Newton constant G {sub N} or introduce longitudinal modes in the gravitational wave propagation. Furthermore this breaking may spoil the standard dispersion relation ω= ck . In [3] the authors have presented a model suggesting that the behavior of the gravitational constant is correct for asymptotic times. In the present work, an explicit checking is made and we finally agree with these claims. Furthermore, it is suggested that the gravitational waves are also well behaved for large times. In the process, some new models with the same behavior are obtained, thus enlarging the list of possible adjustment mechanisms.

  14. Punishment Mechanism with Self-Adjusting Rules in Spatial Voluntary Public Goods Games

    Science.gov (United States)

    Wu, Zhong-Wei; Xu, Zhao-Jin; Zhang, Lian-Zhong

    2014-11-01

    The phenomena of cooperation in animal and human society are ubiquitous, but the selfish outcome that no player contributes to the public good will lead to the “tragedy of the commons”. The recent research shows that high punishment can improve the cooperation of the population. In this paper, we introduce a punishment mechanism into spatial voluntary public goods games with every individual only knowing his own payoff in each round. Using the self-adjusting rules, we find that the different cost for punishment can lead to different effects on the voluntary public goods games. Especially, when the cost for punishment is decreased, a higher contribution region will appear in the case of low r value. It means even for the low r value, individuals can form the contributing groups in large quantities to produce a more efficient outcome than that in moderate r value. In addition, we also find the players' memory can have effects on the average outcome of the population.

  15. Validation of the force and frequency characteristics of the activator adjusting instrument: effectiveness as a mechanical impedance measurement tool.

    Science.gov (United States)

    Keller, T S; Colloca, C J; Fuhr, A W

    1999-02-01

    To determine the dynamic force-time and force-frequency characteristics of the Activator Adjusting Instrument and to validate its effectiveness as a mechanical impedance measurement device; in addition, to refine or optimize the force-frequency characteristics of the Activator Adjusting Instrument to provide enhanced dynamic structural measurement reliability and accuracy. An idealized test structure consisting of a rectangular steel beam with a static stiffness similar to that of the human thoracolumbar spine was used for validation of a method to determine the dynamic mechanical response of the spine. The Activator Adjusting Instrument equipped with a load cell and accelerometer was used to measure forces and accelerations during mechanical excitation of the steel beam. Driving point and transfer mechanical impedance and resonant frequency of the beam were determined by use of a frequency spectrum analysis for different force settings, stylus masses, and stylus tips. Results were compared with beam theory and transfer impedance measurements obtained by use of a commercial electronic PCB impact hammer. The Activator Adjusting Instrument imparted a very complex dynamic impact comprising an initial high force (116 to 140 N), short duration pulse (analysis of the Activator Adjusting Instrument impulse indicated that the Activator Adjusting Instrument has a variable force spectrum and delivers its peak energy at a frequency of 20 Hz. Added masses and different durometer stylus tips had very little influence on the Activator Adjusting Instrument force spectrum. The resonant frequency of the beam was accurately predicted by both the Activator Adjusting Instrument and electronic PCB impact hammer, but variations in the magnitude of the driving point impedance at the resonant frequency were high (67%) compared with the transfer impedance measurements obtained with the electronic PCB impact hammer, which had a more uniform force spectrum and was more repeatable (frequency

  16. Asymptotic Performance Analysis of Two-Way Relaying FSO Networks with Nonzero Boresight Pointing Errors Over Double-Generalized Gamma Fading Channels

    KAUST Repository

    Yang, Liang; Alouini, Mohamed-Slim; Ansari, Imran Shafique

    2018-01-01

    In this correspondence, an asymptotic performance analysis for two-way relaying free-space optical (FSO) communication systems with nonzero boresight pointing errors over double-generalized gamma fading channels is presented. Assuming amplify-and-forward (AF) relaying, two nodes having the FSO ability can communicate with each other through the optical links. With this setup, an approximate cumulative distribution function (CDF) expression for the overall signal-to-noise ratio (SNR) is presented. With this statistic distribution, we derive the asymptotic analytical results for the outage probability and average bit error rate. Furthermore, we provide the asymptotic average capacity analysis for high SNR by using the momentsbased method.

  17. Asymptotic Performance Analysis of Two-Way Relaying FSO Networks with Nonzero Boresight Pointing Errors Over Double-Generalized Gamma Fading Channels

    KAUST Repository

    Yang, Liang

    2018-05-07

    In this correspondence, an asymptotic performance analysis for two-way relaying free-space optical (FSO) communication systems with nonzero boresight pointing errors over double-generalized gamma fading channels is presented. Assuming amplify-and-forward (AF) relaying, two nodes having the FSO ability can communicate with each other through the optical links. With this setup, an approximate cumulative distribution function (CDF) expression for the overall signal-to-noise ratio (SNR) is presented. With this statistic distribution, we derive the asymptotic analytical results for the outage probability and average bit error rate. Furthermore, we provide the asymptotic average capacity analysis for high SNR by using the momentsbased method.

  18. Antecedents, Consequences, and Mechanisms: On the Longitudinal Interplay Between Academic Self-Enhancement and Psychological Adjustment.

    Science.gov (United States)

    Dufner, Michael; Reitz, Anne K; Zander, Lysann

    2015-10-01

    We investigated the reciprocal associations between academic self-enhancement and key indicators of intra- and interpersonal adjustment as well as the role of self-esteem as a mediator. This longitudinal study involved three assessments in a sample of 709 German children and adolescents (Mage  = 11.83; 54% female) over the course of one academic year. We assessed self-reported subjective well-being as an indicator of intrapersonal adjustment and peer-reported popularity as an indicator of interpersonal adjustment. We computed cross-lagged and longitudinal mediational analyses. Academic self-enhancement prospectively predicted high subsequent well-being and popularity. Vice versa, well-being and popularity prospectively predicted high subsequent levels of self-enhancement. High self-esteem mediated the longitudinal associations between self-enhancement and well-being in both directions, but not the links between self-enhancement and popularity. Self-enhancement and adjustment are bidirectionally linked: Self-enhancement entails intrapersonal and interpersonal benefits; at the same time, adjustment in both domains fosters self-enhancement. In terms of intrapersonal, but not interpersonal adjustment, self-esteem seems to serve as a linchpin, accounting for all longitudinal associations. Furthermore, we present evidence indicating that self-enhancement indicators that are based on difference scores (instead of residuals) are problematic and might have led to negatively biased results in the literature. © 2014 Wiley Periodicals, Inc.

  19. Integrated Sight Boresighting

    National Research Council Canada - National Science Library

    Gilstrap, Jeff

    1998-01-01

    ... (IR) pointer into an advanced weapon sight and surveillance system. The Integrated Sight is being developed as a technology demonstrator and potential future upgrade to the Land Warrior and Thermal Weapon Sight Programs...

  20. The Flexible Acceleration Mechanism of China’s Capital Adjustment with the Goal of Consumption-Driven Sustainable Growth

    Directory of Open Access Journals (Sweden)

    Peng Su

    2018-03-01

    Full Text Available China has had an investment-led growth pattern that is unsustainable. It is struggling to shift to a consumption-driven economy, and capital adjustment is crucial to the transition. In response, the principal objective of this study is to analyze the internal market mechanism of China’s capital adjustment. Due to the imperfections of the market, we use the flexible acceleration model, which we put in an IS (Investment – Saving equation–LM (Liquidity preference – Money supply equation framework in order to reflect the guiding role of demand. The results show that the flexible acceleration model fits China’s investment well, and the demand-oriented market mechanism of capital adjustment has been formed; however, China’s market adjustment ability is not strong. The adjustment coefficient is only 0.22, and shows a decreasing trend. So, in the capital optimization process, relying on the market alone is not realistic. Furthermore, the calculated replacement rate is up to 0.429, which indicates that China’s capital is less efficient, and there are duplicated assets, idle assets, and wasted investments. The error correction model’s results show that the impact of the interest rate on the investments is not significant in the short term, so the existence of invalid capital is more likely to stem from the soft budget constraints, which require attention.

  1. Alignment Adjustment Procedures. Automotive Mechanics. Steering & Suspension. Instructor's Guide [and] Student Guide.

    Science.gov (United States)

    Spignesi, B.

    This instructional package, one in a series of individualized instructional units on automotive steering and suspension, consists of a student guide and an instructor guide dealing with automobile alignment and adjustment procedures. Covered in the module are identifying positive and negative cambers, positive and negative casters, and toe-ins;…

  2. Design procedure for a wind-wheel with self-adjusting blade mechanism

    Directory of Open Access Journals (Sweden)

    Gennady A. Oborsky

    2014-12-01

    Full Text Available Developed is a wind-wheel design equipped with the self-adjusting blade. The blade is positioned eccentrically to the balance wheel and can freely rotate around its axis. Elaborated is the method of calculating the energy characteristics for a wind-wheel with the self-adjusting blade, considering not only the wind force but the force of air counter flow resistance to the blade’s rotation. Initially, the blade being located at an angle α = 45 to the wheel rotation plane, the air flow rotates the wheel with the maximum force. Thus, the speed of rotation increases that involves the increase in air counter flow resistance and results in blade turning with respective angle α reduction. This, consequently, reduces the torque. When the torsional force and the resistance enter into equilibrium, the blade takes a certain angle α, and the wheel speed becomes constant. This wind-wheel design including a self-adjusting blade allows increasing the air flow load ratio when compared to the wind-wheel equipped with a jammed blade.

  3. The Unemployed Workers’ Perceptions of Stress and Employment Prospects in Macedonia: The Role of Alternative Adjustment Mechanisms

    Directory of Open Access Journals (Sweden)

    Nikoloski Dimitar

    2017-04-01

    Full Text Available Depressed labour market conditions in Macedonia manifested by high and persistent unemployment rate, strong segmentation and prevailing long-term unemployment is considered as a heritage of more than two decades long period of transition. Unemployment has a number of negative consequences such a decreased income which is assumed to influence the subjective experience of unemployment. The negative macroeconomic shocks in Macedonia have been mitigated due to the strengthened role of alternative labour market adjustment mechanisms such as: employment in the informal sector, emigration and inactivity. However, their impact on the unemployed workers’ perceptions of stress and future labour market prospects is less clear-cut. In this paper we use results from a survey carried out on a sample of unemployed workers in Macedonia in order to identify the psychological implications of unemployment by assessing the perceived stress and employment prospects with particular reference to the role of alternative labour market adjustment mechanisms.

  4. Design and Optimal Research of a Non-Contact Adjustable Magnetic Adhesion Mechanism for a Wall-Climbing Welding Robot

    Directory of Open Access Journals (Sweden)

    Minghui Wu

    2013-01-01

    Full Text Available Wall-climbing welding robots (WCWRs can replace workers in manufacturing and maintaining large unstructured equipment, such as ships. The adhesion mechanism is the key component of WCWRs. As it is directly related to the robot's ability in relation to adsorbing, moving flexibly and obstacle-passing. In this paper, a novel non-contact adjustably magnetic adhesion mechanism is proposed. The magnet suckers are mounted under the robot's axils and the sucker and wall are in non-contact. In order to pass obstacles, the sucker and the wheel unit can be pulled up and pushed down by a lifting mechanism. The magnetic adhesion force can be adjusted by changing the height of the gap between the sucker and the wall by the lifting mechanism. In order to increase the adhesion force, the value of the sucker's magnetic energy density (MED is maximized by optimizing the magnet sucker's structure parameters with a finite element method. Experiments prove that the magnetic adhesion mechanism has enough adhesion force and that the WCWR can complete wall-climbing work within a large unstructured environment.

  5. Detection of a bad mechanical adjustment of a stator through a CEPSTRALE analysis method

    International Nuclear Information System (INIS)

    Le Reverend, D.

    1985-01-01

    After the failure of the stator of the CRUAS 2 nuclear power plant, a full check up was necessary before restarting the engine. In spite of examinations and repairs, a defect could remain. Thereby, an on line surveillance system is usefull, especially during the first months after start up. The ''Mecanique appliquee'' division developed a device for the surveillance of the mechanical integrity of the stator. This equipment is based on the analysis of the vibration [fr

  6. Multipathway Integrated Adjustment Mechanism of Glycyrrhiza Triterpenes Curing Gastric Ulcer in Rats.

    Science.gov (United States)

    Wang, Ying; Wang, Shuai; Bao, Yongrui; Li, Tianjiao; Chang, Xin; Yang, Guanlin; Meng, Xiansheng

    2017-01-01

    Gastric ulcer is a common chronic disease in human digestive system, which is difficult to cure, easy to relapse, and endangers human health seriously. Compared with western medicine, traditional Chinese medicine has a unique advantage in improving the general situation, stablizing medical condition, and with little side effects. Glycyrrhiza known as "king of all the medicine", has a range of pharmacological activities and is commonly used in a variety of proprietary Chinese medicines and formulations. On the basis of explicit antiulcer effect of Glycyrrhiza triterpenes, the molecular mechanisms of its therapeutic effect on acetic acid induced gastric ulcer in rats were explored. Acetic acid induced gastric ulcer model in rats was established to evaluate the curing effect of G. triterpenes and all of the rats were randomised into six groups: Control group, model group, omeprazole group (0.8 mg/mL), triterpenes high dose group (378.0 mg/mL), triterpenes middle dose group (126.0 mg/mL), and triterpenes low dose group (42.0 mg/mL). All rats in groups were orally administered the active group solution 1.5 mL once daily (model and control groups with saline) for 7 days. HPLC-TOF-MS analysis method was performed to obtain the plasma metabolites spectrums of control group, model group, triterpenes high, middle and low dose groups. A total of 11 differential endogenous metabolites related to the therapeutic effect of G. triterpenes were identified, including tryptophan, phingosine-1-phosphate, pantothenic acid, and so on, among which tryptophan and phingosine-1-phosphate are related with the calcium signaling pathway and arachidonic acid (AA) metabolism. At the same time, in order to verify the above results, quantitative real time polymerase chain reaction were performed to evaluate the expression of H + -K + -ATPase alpha mRNA and phospholipase a 2 mRNA in relational signaling pathways. Combined with statistical analysis of plasma metabolic spectrum and gene expression

  7. DIANA: A Machine Learning Mechanism for Adjusting the TDD Uplink-Downlink Configuration in XG-PON-LTE Systems

    Directory of Open Access Journals (Sweden)

    Panagiotis Sarigiannidis

    2017-01-01

    Full Text Available Modern broadband hybrid optical-wireless access networks have gained the attention of academia and industry due to their strategic advantages (cost-efficiency, huge bandwidth, flexibility, and mobility. At the same time, the proliferation of Software Defined Networking (SDN enables the efficient reconfiguration of the underlying network components dynamically using SDN controllers. Hence, effective traffic-aware schemes are feasible in dynamically determining suitable configuration parameters for advancing the network performance. To this end, a novel machine learning mechanism is proposed for an SDN-enabled hybrid optical-wireless network. The proposed architecture consists of a 10-gigabit-capable passive optical network (XG-PON in the network backhaul and multiple Long Term Evolution (LTE radio access networks in the fronthaul. The proposed mechanism receives traffic-aware knowledge from the SDN controllers and applies an adjustment on the uplink-downlink configuration in the LTE radio communication. This traffic-aware mechanism is capable of determining the most suitable configuration based on the traffic dynamics in the whole hybrid network. The introduced scheme is evaluated in a realistic environment using real traffic traces such as Voice over IP (VoIP, real-time video, and streaming video. According to the obtained numerical results, the proposed mechanism offers significant improvements in the network performance in terms of latency and jitter.

  8. Unexperienced mechanical effects of muscular fatigue can be predicted by the Central Nervous System as revealed by anticipatory postural adjustments.

    Science.gov (United States)

    Monjo, Florian; Forestier, Nicolas

    2014-09-01

    Muscular fatigue effects have been shown to be compensated by the implementation of adaptive compensatory neuromuscular strategies, resulting in modifications of the initial motion coordination. However, no studies have focused on the efficiency of the feedforward motor commands when muscular fatigue occurs for the first time during a particular movement. This study included 18 healthy subjects who had to perform arm-raising movements in a standing posture at a maximal velocity before and after a fatiguing procedure involving focal muscles. The arm-raising task implies the generation of predictive processes of control, namely Anticipatory Postural Adjustments (APAs), whose temporal and quantitative features have been shown to be dependent on the kinematics of the upcoming arm-raising movement. By altering significantly the kinematic profile of the focal movement with a fatiguing procedure, we sought to find out whether APAs scaled to the lower mechanical disturbance. APAs were measured using surface electromyography. Following the fatiguing procedure, acceleration peaks of the arm movement decreased by ~27%. APAs scaled to this lower fatigue-related disturbance during the very first trial post-fatigue, suggesting that the Central Nervous System can predict unexperienced mechanical effects of muscle fatigue. It is suggested that these results are accounted for by prediction processes in which the central integration of the groups III and IV afferents leads to an update of the internal model by remapping the relationship between focal motor command magnitude and the actual mechanical output.

  9. Cost per QALY (quality-adjusted life year and lifetime cost of prolonged mechanical ventilation in Taiwan.

    Directory of Open Access Journals (Sweden)

    Mei-Chuan Hung

    Full Text Available INTRODUCTION: Patients who require prolonged mechanical ventilation (PMV are increasing and producing financial burdens worldwide. This study determines the cost per QALY (quality-adjusted life year, out-of-pocket expenses, and lifetime costs for PMV patients stratified by underlying diseases and cognition levels. METHODS: A nationwide sample of 50,481 patients with continual mechanical ventilation for more than 21 days was collected during 1997-2007. After stratifying the patients according to specific diagnoses, a latent class analysis (LCA was performed to categorise PMV patients with multiple co-morbidities into several homogeneous groups. The survival functions were estimated for individual groups using the Kaplan-Meier method and extrapolated to 300 months through a semi-parametric method. The survival functions were adjusted using an EQ-5D utility value derived from a convenience sample of 142 PMV patients to estimate quality-adjusted life expectancies (QALE. Another convenience sample of 165 patients was used to estimate the out-of-pocket expenses. The lifetime expenditures paid by the single-payer National Health Insurance (NHI system and patients' families were estimated by multiplying average monthly expenditures by the survival probabilities and summing the values over lifetime. RESULTS: PMV therapy costs more than 100,000 U.S. dollars (USD per QALY for all patients with poor cognition. For patients with partial cognition, PMV therapy costs less than 56,000 USD per QALY for those with liver cirrhosis, intracranial or spinal cord injuries, and 57,000-69,000 USD for patients with multiple co-morbidities under age of 65. The average lifetime cost of PMV was usually below 56,000 USD. The out-of-pocket expenses were often more than one-third of the total cost of treatment. CONCLUSIONS: PMV treatment for patients with poor cognition would cost more than 5 times Taiwan's GDP (gross domestic products, or less cost-effective. The out

  10. Adjustable, physiological ventricular restraint improves left ventricular mechanics and reduces dilatation in an ovine model of chronic heart failure.

    Science.gov (United States)

    Ghanta, Ravi K; Rangaraj, Aravind; Umakanthan, Ramanan; Lee, Lawrence; Laurence, Rita G; Fox, John A; Bolman, R Morton; Cohn, Lawrence H; Chen, Frederick Y

    2007-03-13

    Ventricular restraint is a nontransplantation surgical treatment for heart failure. The effect of varying restraint level on left ventricular (LV) mechanics and remodeling is not known. We hypothesized that restraint level may affect therapy efficacy. We studied the immediate effect of varying restraint levels in an ovine heart failure model. We then studied the long-term effect of restraint applied over a 2-month period. Restraint level was quantified by use of fluid-filled epicardial balloons placed around the ventricles and measurement of balloon luminal pressure at end diastole. At 4 different restraint levels (0, 3, 5, and 8 mm Hg), transmural myocardial pressure (P(tm)) and indices of myocardial oxygen consumption (MVO2) were determined in control (n=5) and ovine heart failure (n=5). Ventricular restraint therapy decreased P(tm) and MVO2, and improved mechanical efficiency. An optimal physiological restraint level of 3 mm Hg was identified to maximize improvement without an adverse affect on systemic hemodynamics. At this optimal level, end-diastolic P(tm) and MVO2 indices decreased by 27% and 20%, respectively. The serial longitudinal effects of optimized ventricular restraint were then evaluated in ovine heart failure with (n=3) and without (n=3) restraint over 2 months. Optimized ventricular restraint prevented and reversed pathological LV dilatation (130+/-22 mL to 91+/-18 mL) and improved LV ejection fraction (27+/-3% to 43+/-5%). Measured restraint level decreased over time as the LV became smaller, and reverse remodeling slowed. Ventricular restraint level affects the degree of decrease in P(tm), the degree of decrease in MVO2, and the rate of LV reverse remodeling. Periodic physiological adjustments of restraint level may be required for optimal restraint therapy efficacy.

  11. The Benefits of Goal Adjustment Capacities for Well-Being Among Women With Breast Cancer: Potential Mechanisms of Action.

    Science.gov (United States)

    Mens, Maria G; Scheier, Michael F

    2016-12-01

    Breast cancer can seriously disrupt a person's important life goals. As such, the ability to adjust one's goals may be critical for well-being. The present study investigated the relationships between disengagement/reengagement capacity and well-being among women with breast cancer, as well as several potential mechanisms (intrusive thoughts, life purpose, and physical activity) that could explain these relationships. The sample consisted of 230 women with early-stage (n = 172) or late-stage (n = 58) breast cancer, who were followed prospectively for 8 months. Well-being measures consisted of global mental health, perceived physical health, positive/negative affect, and sleep efficiency. Disengagement capacity did not predict any outcome variable. In contrast, reengagement capacity prospectively predicted changes in global mental health, positive affect, negative affect, sleep efficiency, life purpose, and physical activity. Life purpose mediated the prospective relationship between reengagement capacity and multiple aspects of well-being. The relationships between purpose and positive/negative affect were reciprocal over time. Results also suggested that physical activity is not a mediator, but is in fact a result of the effect of reengagement capacity on well-being. The results demonstrate that reengagement capacity is important for well-being among women with breast cancer. © 2015 Wiley Periodicals, Inc.

  12. A review of the literature pertaining to the efficacy, safety, educational requirements, uses and usage of mechanical adjusting devices

    Science.gov (United States)

    Taylor, Shane H; Arnold, Nicole D; Biggs, Lesley; Colloca, Christopher J; Mierau, Dale R; Symons, Bruce P; Triano, John J

    2004-01-01

    Over the past decade, mechanical adjusting devices (MADs) were a major source of debate within the Chiropractors’ Association of Saskatchewan (CAS). Since Saskatchewan was the only jurisdiction in North America to prohibit the use of MADs, the CAS established a committee in 2001 to review the literature on MADs. The committee evaluated the literature on the efficacy, safety, and uses of moving stylus instruments within chiropractic practice, and the educational requirements for chiropractic practice. Following the rating criteria for the evaluation of evidence, as outlined in the Clinical Guidelines for Chiropractic Practice in Canada (1994), the committee reviewed 55 articles – all of which pertained to the Activator. Of the 55 articles, 13 were eliminated from the final study. Of the 42 remaining articles, 6 were rated as class 1 evidence; 11 were rated as class 2 evidence and 25 were rated as class 3 evidence. In this article – the second in a series of two – we review the results of uses and usage, safety and educational requirements. Of the 30 articles designated under the category of usage, 3 were rated as Class 1 evidence; 9 studies were classified as Class 2 evidence and 18 were rated as Class 3 evidence. Overall the committee reached consensus that in clinical practice, there is broad application of these procedures. A minority report was written arguing that the reviewer was unable to reach a conclusion about the use of the Activator Instrument other than it is used as a clinical and research tool. Of the 16 studies that dealt either explicitly or implicitly with safety, 4 were Class 1 evidence; 3 were Class 2 evidence and 9 were Class 3 evidence. Overall the committee reached consensus that the evidence supports that the Activator instrument is safe and has no more relative risk than do manual HVLA procedures. A minority report was written arguing that there is no evidence either to support or refute the view that MAD is safe. Of the 5 studies

  13. A Flexure-Based Mechanism for Precision Adjustment of National Ignition Facility Target Shrouds in Three Rotational Degrees of Freedom

    International Nuclear Information System (INIS)

    Boehm, K.-J.; Gibson, C. R.; Hollaway, J. R.; Espinoza-Loza, F.

    2016-01-01

    This study presents the design of a flexure-based mount allowing adjustment in three rotational degrees of freedom (DOFs) through high-precision set-screw actuators. The requirements of the application called for small but controlled angular adjustments for mounting a cantilevered beam. The proposed design is based on an array of parallel beams to provide sufficiently high stiffness in the translational directions while allowing angular adjustment through the actuators. A simplified physical model in combination with standard beam theory was applied to estimate the deflection profile and maximum stresses in the beams. A finite element model was built to calculate the stresses and beam profiles for scenarios in which the flexure is simultaneously actuated in more than one DOF.

  14. Study on Gas Field Optimization Distribution with Parameters Adjustment of the Air Duct Outlet for Mechanized Heading Face in Coal Mine

    Science.gov (United States)

    Gong, Xiao-Yan; Zhang, Xin-Yi; Wu, Yue; Xia, Zhi-Xin; Li, Ying

    2017-12-01

    At present, as the increasingly drilling dimensions with cross-section expansion and distance prolong in coal mine, the situation of gas accumulation in mechanized heading face becomes severe. In this paper, optimization research of gas distribution was carried out by adjusting parameters of the air duct outlet, including angle, caliber and the front and rear distance of air duct outlet. Mechanized heading face of Ningtiaota coal mine was taken as the research object, simulated and analyzed the problems of original gas field, the reasonable parameters range of the air duct outlet was determined according to the allowable range of wind speed and the effect of gas dilution, the adjustment range of each parameter of the air duct outlet is preliminarily determined. Base on this, the distribution of gas field under different parameters adjustment of air duct outlet was simulated. The specific parameters under the different distance between the air duct outlet and the mechanized heading face were obtained, and a new method of optimizing the gas distribution by adjusting parameters of the air duct outlet was provided.

  15. Spec Rekindled-A Simple Torque Correction Mechanics for Transposed Teeth in Conjunction with Pre-adjusted Edgewise Appliance System.

    Science.gov (United States)

    Singh, Harpreet; Maurya, Raj Kumar; Thakkar, Surbhi

    2016-12-01

    Complete transposition of teeth is a rather rare phenomenon. After correction of transposed and malaligned lateral incisor and canine, attainment of appropriate individual antagonistic tooth torque is indispensable, which many orthodontists consider to be a herculean task. Here, a novel method is proposed which demonstrates the use of Spec reverse torquing auxillary as an effective adjunctive aid in conjunction with pre-adjusted edgewise brackets.

  16. The Effects of Mechanical Transparency on Adjustment to a Complex Visuomotor Transformation at Early and Late Working Age

    Science.gov (United States)

    Heuer, Herbert; Hegele, Mathias

    2010-01-01

    Mechanical tools are transparent in the sense that their input-output relations can be derived from their perceptible characteristics. Modern technology creates more and more tools that lack mechanical transparency, such as in the control of the position of a cursor by means of a computer mouse or some other input device. We inquired whether an…

  17. Convexity Adjustments

    DEFF Research Database (Denmark)

    M. Gaspar, Raquel; Murgoci, Agatha

    2010-01-01

    A convexity adjustment (or convexity correction) in fixed income markets arises when one uses prices of standard (plain vanilla) products plus an adjustment to price nonstandard products. We explain the basic and appealing idea behind the use of convexity adjustments and focus on the situations...

  18. A poly(glycerol sebacate)-coated mesoporous bioactive glass scaffold with adjustable mechanical strength, degradation rate, controlled-release and cell behavior for bone tissue engineering.

    Science.gov (United States)

    Lin, Dan; Yang, Kai; Tang, Wei; Liu, Yutong; Yuan, Yuan; Liu, Changsheng

    2015-07-01

    Various requirements in the field of tissue engineering have motivated the development of three-dimensional scaffold with adjustable physicochemical properties and biological functions. A series of multiparameter-adjustable mesoporous bioactive glass (MBG) scaffolds with uncrosslinked poly(glycerol sebacate) (PGS) coating was prepared in this article. MBG scaffold was prepared by a modified F127/PU co-templating process and then PGS was coated by a simple adsorption and lyophilization process. Through controlling macropore parameters and PGS coating amount, the mechanical strength, degradation rate, controlled-release and cell behavior of the composite scaffold could be modulated in a wide range. PGS coating successfully endowed MBG scaffold with improved toughness and adjustable mechanical strength covering the bearing range of trabecular bone (2-12MPa). Multilevel degradation rate of the scaffold and controlled-release rate of protein from mesopore could be achieved, with little impact on the protein activity owing to an "ultralow-solvent" coating and "nano-cavity entrapment" immobilization method. In vitro studies indicated that PGS coating promoted cell attachment and proliferation in a dose-dependent manner, without affecting the osteogenic induction capacity of MBG substrate. These results first provide strong evidence that uncrosslinked PGS might also yield extraordinary achievements in traditional MBG scaffold. With the multiparameter adjustability, the composite MBG/PGS scaffolds would have a hopeful prospect in bone tissue engineering. The design considerations and coating method of this study can also be extended to other ceramic-based artificial scaffolds and are expected to provide new thoughts on development of future tissue engineering materials. Copyright © 2015 Elsevier B.V. All rights reserved.

  19. Global climate regulation and border adjustment mechanisms: the case of carbon importers inclusion in the european trading scheme

    International Nuclear Information System (INIS)

    2008-06-01

    The creation of an inclusion mechanism applied to imports whose production process increases significantly the global climate risk is looked upon as a solution to a collective-action problem. Such a mechanism would provide those States that will sign the next United Nations Convention on Climate Change with a potential remedy if and when gaps between quantified objects, to which all are committed, entail significant competition distortions. Whether this mechanism assumes the form of an external carbon tax or consists in including importers in the European system of CO 2 quota exchanges, it would surely respond to the re-distributive need generated by global warming, provided that the proceeds are used to help bring industrial production in developing countries up to standard. These restrictive measures aimed at preserving the planet are probably compatible with the extraordinary regimes applied by the WTO, which already uses exogenous non-trade norms to arbitrate conflicts. This would validate further the legitimacy of authority transfers onto the WTO, whose scope of legal authority increases constantly, along with that of conflicts that stem from collective preferences. (author)

  20. Parental Incarceration, Transnational Migration, and Military Deployment: Family Process Mechanisms of Youth Adjustment to Temporary Parent Absence

    Science.gov (United States)

    Rodriguez, Aubrey J.; Margolin, Gayla

    2015-01-01

    The temporary absence of a parent (e.g., due to incarceration, migration, or military deployment) is experienced by many youth and can have profound effects. Available research within these disparate literatures primarily has catalogued contextual and individual variables that influence youth adaptation, which are integrated and summarized here. In addition, we present a systematic review of proximal family process mechanisms by which youth and their family members adapt to periods of temporary parent absence. This systematic review across the different types of parent absence produced four themes: communication among family members, parenting characteristics during absence, negotiation of decision-making power and authority, and shifts in family roles. By juxtaposing the three types of temporary parent absence, we aim to bridge the separate research silos of parent absence due to incarceration, deployment, and migration, and to bring wide-ranging characteristics and processes of temporary parent-absent families into sharper focus. The review highlights possibilities for fuller integration of these literatures, and emphasizes the clinical value of considering these types of experiences from a family and relational perspective, rather than an individual coping perspective. PMID:25304163

  1. Effect of adjustable molecular chain structure and pure silica zeolite nanoparticles on thermal, mechanical, dielectric, UV-shielding and hydrophobic properties of fluorinated copolyimide composites

    Science.gov (United States)

    Li, Qing; Liao, Guangfu; Zhang, Shulai; Pang, Long; Tong, Hao; Zhao, Wenzhe; Xu, Zushun

    2018-01-01

    A series of polyimide (PI) films, polyimide/pure silica zeolite nanoparticles (PSZN) blend films and polyimide/amine-functionalized pure silica zeolite nanoparticles (APSZN) composite films were successfully prepared by random copolycondensation. Thereinto, PSZN were synthesized by hydrothermal method. The polyimides were derived from 4,4‧-diaminodiphenyl ether (ODA), and three adjustable molar ratios (3:1, 1:1, 1:3) of 2,2-bis[4-(3,4-dicarboxyphenoxy)phenyl] propane dianhydride (BPADA) and 4,4‧-(hexafluoroisopropylidene) diphthalic anhydride (6FDA). The effects of PSZN, APSZN and different chain structure on PI films were specifically evaluated in terms of morphology, thermal, mechanical, dielectric and UV-shielding properties, etc. Comparison was given among pure PI flims, PI/PSZN blend films and PI/APSZN composite flims. The results showed that the thermal and mechanical properties of PI films were drastically impaired after adding PSZN. On the contrary, the strength, toughness and thermal stability were improved after adding APSZN. Moreover, the dielectric constants of the PI/APSZN composite flims were lowered but UV-shielding properties were enhanced. Interestingly, we found that the greatest effects were obtained through introducing APSZN in PI derived by the 1:1 ratio of BPADA:6FDA. The corresponding PI/APSZN composite flim exhibited the most reinforced and toughened properties, the largest decrement of dielectric constant and the best UV-shielding efficiency, which made the composite flim be used as ultraviolet shielding material in outer space filled with high temperature and intensive ultraviolet light. Meanwhile, this work also provided a facile way to synthesize composite materials with adjustable performance.

  2. Asymmetric adjustment

    NARCIS (Netherlands)

    2010-01-01

    A method of adjusting a signal processing parameter for a first hearing aid and a second hearing aid forming parts of a binaural hearing aid system to be worn by a user is provided. The binaural hearing aid system comprises a user specific model representing a desired asymmetry between a first ear

  3. Salary adjustments

    CERN Multimedia

    HR Department

    2008-01-01

    In accordance with decisions taken by the Finance Committee and Council in December 2007, salaries are adjusted with effect from 1 January 2008. Scale of basic salaries and scale of stipends paid to fellows (Annex R A 5 and R A 6 respectively): increased by 0.71% with effect from 1 January 2008. As a result of the stability of the Geneva consumer price index, following elements do not increase: a) Family Allowance, Child Allowance and Infant Allowance (Annex R A 3). b) Reimbursement of education fees: maximum amounts of reimbursement (Annex R A 4.01) for the academic year 2007/2008. Related adjustments will be implemented, wherever applicable, to Paid Associates and Students. As in the past, the actual percentage increase of each salary position may vary, due to the application of a constant step value and the rounding effects. Human Resources Department Tel. 73566

  4. Salary adjustments

    CERN Multimedia

    HR Department

    2008-01-01

    In accordance with decisions taken by the Finance Committee and Council in December 2007, salaries are adjusted with effect from 1 January 2008. Scale of basic salaries and scale of stipends paid to fellows (Annex R A 5 and R A 6 respectively): increased by 0.71% with effect from 1 January 2008. As a result of the stability of the Geneva consumer price index, the following elements do not increase: a)\tFamily Allowance, Child Allowance and Infant Allowance (Annex R A 3); b)\tReimbursement of education fees: maximum amounts of reimbursement (Annex R A 4.01) for the academic year 2007/2008. Related adjustments will be applied, wherever applicable, to Paid Associates and Students. As in the past, the actual percentage increase of each salary position may vary, due to the application of a constant step value and rounding effects. Human Resources Department Tel. 73566

  5. Shaft adjuster

    Science.gov (United States)

    Harry, Herbert H.

    1989-01-01

    Apparatus and method for the adjustment and alignment of shafts in high power devices. A plurality of adjacent rotatable angled cylinders are positioned between a base and the shaft to be aligned which when rotated introduce an axial offset. The apparatus is electrically conductive and constructed of a structurally rigid material. The angled cylinders allow the shaft such as the center conductor in a pulse line machine to be offset in any desired alignment position within the range of the apparatus.

  6. Adjustable collimator

    International Nuclear Information System (INIS)

    Carlson, R.W.; Covic, J.; Leininger, G.

    1981-01-01

    In a rotating fan beam tomographic scanner there is included an adjustable collimator and shutter assembly. The assembly includes a fan angle collimation cylinder having a plurality of different length slots through which the beam may pass for adjusting the fan angle of the beam. It also includes a beam thickness cylinder having a plurality of slots of different widths for adjusting the thickness of the beam. Further, some of the slots have filter materials mounted therein so that the operator may select from a plurality of filters. Also disclosed is a servo motor system which allows the operator to select the desired fan angle, beam thickness and filter from a remote location. An additional feature is a failsafe shutter assembly which includes a spring biased shutter cylinder mounted in the collimation cylinders. The servo motor control circuit checks several system conditions before the shutter is rendered openable. Further, the circuit cuts off the radiation if the shutter fails to open or close properly. A still further feature is a reference radiation intensity monitor which includes a tuning-fork shaped light conducting element having a scintillation crystal mounted on each tine. The monitor is placed adjacent the collimator between it and the source with the pair of crystals to either side of the fan beam

  7. Facet-dependent photocatalytic mechanisms of anatase TiO2: A new sight on the self-adjusted surface heterojunction

    International Nuclear Information System (INIS)

    Gao, Shujun; Wang, Wei; Ni, Yaru; Lu, Chunhua; Xu, Zhongzi

    2015-01-01

    Efficient separation of photo-generated electrons and holes is crucial for improving the photocatalytic activity of semiconductor photocatalysts. In the present study, we show surface heterojunction is existed on anatase TiO 2 with exposed {101}, {010}, {001}, and {110} facets. With the help of selective Pt deposition, it is found the Schottky junction together with proper surface heterojunction is helpful to separate the photo-generated electrons and holes. Moreover, the photo-reduction and photo-oxidation activities of the facets are depended on the reaction systems, resulting in self-adjusted surface heterojunction. The as-prepared photocatalyst will give the highest phenol degradation efficiency when Pt nanoparticles are only deposited on the {101} and {010} facets. In contrast, more Pt deposited on the {001} and {110} facets will decrease the photocatalytic activity. The average phenol degradation rate, which will gradually reduce along with the increased phenol concentration, of TiO 2 (20 mg) is ca. 1.59 mg/min when its concentration is lower than 8 mg/L. However, similar results have not been observed in P25-based reaction systems, evidencing the great influence of self-adjusted surface heterojunction. This study may be helpful to understand the photocatalytic mechanisms of semiconductor photocatalysts with exposed different facets. Thus more efficient practical application of the photocatalysts for environment protection can be reached. - Highlights: • Surface heterojunction is systematically discussed on TiO 2 with various facets. • The surface heterojunction is found to be closely related to the reaction systems. • Proper surface heterojunction and Schottky junction is positive for photocatalysis. • A new sight is given to sufficiently unleash the fascinating properties of TiO 2 . • More efficient practical application can be reached

  8. Mechanisms of physiological adjustment of N2 fixation in Cicer arietinum L. (chickpea) during early stages of water deficit: single or multi-factor controls.

    Science.gov (United States)

    Nasr Esfahani, Maryam; Sulieman, Saad; Schulze, Joachim; Yamaguchi-Shinozaki, Kazuko; Shinozaki, Kazuo; Tran, Lam-Son Phan

    2014-09-01

    Drought negatively impacts symbiotic nitrogen fixation (SNF) in Cicer arietinum L. (chickpea), thereby limiting yield potential. Understanding how drought affects chickpea nodulation will enable the development of strategies to biotechnologically engineer chickpea varieties with enhanced SNF under drought conditions. By analyzing carbon and nitrogen metabolism, we studied the mechanisms of physiological adjustment of nitrogen fixation in chickpea plants nodulated with Mesorhizobium ciceri during both drought stress and subsequent recovery. The nitrogenase activity, levels of several key carbon (in nodules) and nitrogen (in both nodules and leaves) metabolites and antioxidant compounds, as well as the activity of related nodule enzymes were examined in M. ciceri-inoculated chickpea plants under early drought stress and subsequent recovery. Results indicated that drought reduced nitrogenase activity, and that this was associated with a reduced expression of the nifK gene. Furthermore, drought stress promoted an accumulation of amino acids, mainly asparagine in nodules (but not in leaves), and caused a cell redox imbalance in nodules. An accumulation of organic acids, especially malate, in nodules, which coincided with the decline of nodulated root respiration, was also observed under drought stress. Taken together, our findings indicate that reduced nitrogenase activity occurring at early stages of drought stress involves, at least, the inhibition of respiration, nitrogen accumulation and an imbalance in cell redox status in nodules. The results of this study demonstrate the potential that the genetic engineering-based improvement of SNF efficiency could be applied to reduce the impact of drought on the productivity of chickpea, and perhaps other legume crops. © 2014 The Authors The Plant Journal © 2014 John Wiley & Sons Ltd.

  9. Time-adjusted variable resistor

    Science.gov (United States)

    Heyser, R. C.

    1972-01-01

    Timing mechanism was developed effecting extremely precisioned highly resistant fixed resistor. Switches shunt all or portion of resistor; effective resistance is varied over time interval by adjusting switch closure rate.

  10. Kalman Filter Input Processor for Boresight Calibration

    Science.gov (United States)

    Strekalov, Dmitry; Kruizinga, Gerhard; Paik, Meegyeong; Yuan, Dah-Ning; Asmar, Sami W.

    2014-01-01

    Ka-band ranging provides the phase center (PC) to phase center range, which needs to be converted to the center of mass (CM) to center of mass range. Nominally, both PC and CM lie on the line connecting the spacecraft GRAIL A and GRAIL B. In this case, the conversion should be done simply by adding the CM-to-PC distance L to the measured range for both spacecraft. However, due to various technical reasons, such as displacement of the true CM from its nominal position in the SRF, or spacecraft attitude fluctuations, the PC and CM define a unit vector that may be different from the nominal line of sight. The objectives of the software are to determine the actual line of sight direction for each spacecraft and correct the previously recorded range data, and to provide instructions for how to maneuver each spacecraft to make necessary attitude corrections.

  11. A self-driven temperature and flow rate co-adjustment mechanism based on Shape-Memory-Alloy (SMA) assembly for an adaptive thermal control coldplate module with on-orbit service characteristics

    International Nuclear Information System (INIS)

    Guo, Wei; Li, Yunhua; Li, Yun-Ze; Zhong, Ming-Liang; Wang, Sheng-Nan; Wang, Ji-Xiang; Zhang, Jia-Xun

    2017-01-01

    Highlights: • A self-driven temperature and flow rate co-adjustment mechanism based on SMA assembly is proposed. • An adaptive thermal control coldplate module (TCCM) is introduced. • A testbed is set up to investigate the TCCM adaptive thermal management performances. • The TCCM has the potential for spacecrafts on-orbit services. - Abstract: An adaptive thermal control coldplate module (TCCM) was proposed in this paper to fulfill the requirements of modular thermal control systems for spacecrafts on-orbit services. The TCCM could provide flow rate and temperature co-adjustment by using Shape-Memory-Alloy (SMA) assembly which possesses self-driven abilities. In this paper, the adaptive thermal management mechanism of the TCCM integrated with a single phase mechanically pumped fluid loop (SPMPFL) is described in detail, a verification testbed was established to examine the TCCM dynamic characteristics. Various working conditions such as inlet temperature, flow rate and thermal load disturbances were imposed on the TCCM to inspect its startup and transient performance. It was observed that the TCCM may present robust temperature control results with low overshoot (maximum 16.8%) and small temperature control error (minimum 0.18%), fast time response (minimum 600 s) was also revealed. The results demonstrated that the well-designed TCCM provided effective autonomous flow-rate and temperature co-adjustment operations, which may be a promising candidate for realizing modular level adaptive thermal management for spacecrafts on-orbit services.

  12. An ergonomics prototype of adjustable chin stands aid for visual mechanical inspection at electronic manufacturing-based company in Kuantan, Malaysia

    Science.gov (United States)

    Elias, Nurainaa; Mat Yahya, Nafrizuan

    2018-04-01

    Chin stands aid is a device designed to reduce fatigue on the chin during the Visual Mechanical Inspection (VMI) task for operators in TT Electronic Sdn Bhd, Kuantan, Malaysia. It is also used to reduce cycle time and also improve employee well-being in terms of comfort. In this project, a 3D model of chin stands aid with an ergonomics approach is created using SOLIDWORKS software. Two different concepts were designed and the best one is chosen based on the Pugh concept selection method, concept screening and also concept scoring. After the selection of concepts is done, a prototype of chin stands aid will be developed and a simulation of the prototype is performed. The simulation has been executed by using Workbench ANSYS software as a tool. Stress analysis, deformation analysis, and fatigue analysis have been done to know the strength and lifespan of the product. The prototype also has been tested to know the functionality and also comfortability for the user to use the chin stands aid.

  13. Annual Adjustment Factors

    Data.gov (United States)

    Department of Housing and Urban Development — The Department of Housing and Urban Development establishes the rent adjustment factors - called Annual Adjustment Factors (AAFs) - on the basis of Consumer Price...

  14. NET SALARY ADJUSTMENT

    CERN Multimedia

    Finance Division

    2001-01-01

    On 15 June 2001 the Council approved the correction of the discrepancy identified in the net salary adjustment implemented on 1st January 2001 by retroactively increasing the scale of basic salaries to achieve the 2.8% average net salary adjustment approved in December 2000. We should like to inform you that the corresponding adjustment will be made to your July salary. Full details of the retroactive adjustments will consequently be shown on your pay slip.

  15. A Dynamic Coordination Mechanism Using Adjustable Autonomy

    NARCIS (Netherlands)

    Neef, R.M.; Vecht, B. van der; Dignum, F.; Meyer, J.J.C.

    2008-01-01

    Agents in an organization need to coordinate their actions in order to reach the organizational goals. This research describes the relation between types of coordination and the autonomy of actors. In an experimental setting we show that there is not one best way to coordinate in all situations. The

  16. A Dynamic Coordination Mechanism Using Adjustable Autonomy

    NARCIS (Netherlands)

    Vecht, B. van der; Dignum, F.; Meyer, J.J.C.; Neef, R.M.

    2007-01-01

    Agents in an organization need to coordinate their actions in order to reach the organizational goals. This research describes the relation between types of coordination and the autonomy of actors. In an experimental setting we show that there is not one best way to coordinate in all situations. The

  17. Repatriation Adjustment: Literature Review

    Directory of Open Access Journals (Sweden)

    Gamze Arman

    2009-12-01

    Full Text Available Expatriation is a widely studied area of research in work and organizational psychology. After expatriates accomplish their missions in host countries, they return to their countries and this process is called repatriation. Adjustment constitutes a crucial part in repatriation research. In the present literature review, research about repatriation adjustment was reviewed with the aim of defining the whole picture in this phenomenon. Present research was classified on the basis of a theoretical model of repatriation adjustment. Basic frame consisted of antecedents, adjustment, outcomes as main variables and personal characteristics/coping strategies and organizational strategies as moderating variables.

  18. CO-REGISTRATION AIRBORNE LIDAR POINT CLOUD DATA AND SYNCHRONOUS DIGITAL IMAGE REGISTRATION BASED ON COMBINED ADJUSTMENT

    Directory of Open Access Journals (Sweden)

    Z. H. Yang

    2016-06-01

    Full Text Available Aim at the problem of co-registration airborne laser point cloud data with the synchronous digital image, this paper proposed a registration method based on combined adjustment. By integrating tie point, point cloud data with elevation constraint pseudo observations, using the principle of least-squares adjustment to solve the corrections of exterior orientation elements of each image, high-precision registration results can be obtained. In order to ensure the reliability of the tie point, and the effectiveness of pseudo observations, this paper proposed a point cloud data constrain SIFT matching and optimizing method, can ensure that the tie points are located on flat terrain area. Experiments with the airborne laser point cloud data and its synchronous digital image, there are about 43 pixels error in image space using the original POS data. If only considering the bore-sight of POS system, there are still 1.3 pixels error in image space. The proposed method regards the corrections of the exterior orientation elements of each image as unknowns and the errors are reduced to 0.15 pixels.

  19. Mechanics

    CERN Document Server

    Hartog, J P Den

    1961-01-01

    First published over 40 years ago, this work has achieved the status of a classic among introductory texts on mechanics. Den Hartog is known for his lively, discursive and often witty presentations of all the fundamental material of both statics and dynamics (and considerable more advanced material) in new, original ways that provide students with insights into mechanical relationships that other books do not always succeed in conveying. On the other hand, the work is so replete with engineering applications and actual design problems that it is as valuable as a reference to the practicing e

  20. ADJUSTABLE CHIP HOLDER

    DEFF Research Database (Denmark)

    2009-01-01

    An adjustable microchip holder for holding a microchip is provided having a plurality of displaceable interconnection pads for connecting the connection holes of a microchip with one or more external devices or equipment. The adjustable microchip holder can fit different sizes of microchips...

  1. Adjusting estimative prediction limits

    OpenAIRE

    Masao Ueki; Kaoru Fueda

    2007-01-01

    This note presents a direct adjustment of the estimative prediction limit to reduce the coverage error from a target value to third-order accuracy. The adjustment is asymptotically equivalent to those of Barndorff-Nielsen & Cox (1994, 1996) and Vidoni (1998). It has a simpler form with a plug-in estimator of the coverage probability of the estimative limit at the target value. Copyright 2007, Oxford University Press.

  2. Adjustable Pitot Probe

    Science.gov (United States)

    Ashby, George C., Jr.; Robbins, W. Eugene; Horsley, Lewis A.

    1991-01-01

    Probe readily positionable in core of uniform flow in hypersonic wind tunnel. Formed of pair of mating cylindrical housings: transducer housing and pitot-tube housing. Pitot tube supported by adjustable wedge fairing attached to top of pitot-tube housing with semicircular foot. Probe adjusted both radially and circumferentially. In addition, pressure-sensing transducer cooled internally by water or other cooling fluid passing through annulus of cooling system.

  3. Mechanics

    CERN Document Server

    Chester, W

    1979-01-01

    When I began to write this book, I originally had in mind the needs of university students in their first year. May aim was to keep the mathematics simple. No advanced techniques are used and there are no complicated applications. The emphasis is on an understanding of the basic ideas and problems which require expertise but do not contribute to this understanding are not discussed. How­ ever, the presentation is more sophisticated than might be considered appropri­ ate for someone with no previous knowledge of the subject so that, although it is developed from the beginning, some previous acquaintance with the elements of the subject would be an advantage. In addition, some familiarity with element­ ary calculus is assumed but not with the elementary theory of differential equations, although knowledge of the latter would again be an advantage. It is my opinion that mechanics is best introduced through the motion of a particle, with rigid body problems left until the subject is more fully developed. Howev...

  4. Convexity Adjustments for ATS Models

    DEFF Research Database (Denmark)

    Murgoci, Agatha; Gaspar, Raquel M.

    . As a result we classify convexity adjustments into forward adjustments and swaps adjustments. We, then, focus on affine term structure (ATS) models and, in this context, conjecture convexity adjustments should be related of affine functionals. In the case of forward adjustments, we show how to obtain exact...

  5. Sustainable urban regime adjustments

    DEFF Research Database (Denmark)

    Quitzau, Maj-Britt; Jensen, Jens Stissing; Elle, Morten

    2013-01-01

    The endogenous agency that urban governments increasingly portray by making conscious and planned efforts to adjust the regimes they operate within is currently not well captured in transition studies. There is a need to acknowledge the ambiguity of regime enactment at the urban scale. This direc...

  6. Downhole adjustable bent assemblies

    International Nuclear Information System (INIS)

    Askew, W.E.

    1992-01-01

    This patent describes downhole adjustable apparatus for creating a bend angle in order to affect the inclination of a drilled borehole. It comprises an upper tubular member having an upper portion and a lower portion; lower tubular member having an upper portion and a lower portion; one of the portions being received within the other for relative rotational movement about an axis that is inclined with respect to the the longitudinal axes of the members, whereby in a first rotational position the longitudinal axes have one geometrical relationship, and in a second rotational position the longitudinal axes have a second, different geometrical relationship

  7. Adjusting water resources management to climate change

    Energy Technology Data Exchange (ETDEWEB)

    Riebsame, W E

    1988-01-01

    The nature of climate impacts and adjustment in water supply and flood management is discussed, and a case study of water manager response to climate fluctuation in California's Sacramento Basin is presented. The case illuminates the effect on climate impact and response of traditional management approaches, the dynamic qualities of maturing water systems, socially imposed constraints, and climate extremes. A dual pattern of crisis-response and gradual adjustment emerges, and specific mechanisms for effecting adjustment of water management systems are identified. The case study, and broader trends in US water development, suggest that oversized structural capacity, the traditional adjustment to climate variability in water resources, may prove less feasible in the future as projects become smaller and new facilities are delayed by economic and environmental concerns.

  8. Adjustment disorder: current perspectives

    Directory of Open Access Journals (Sweden)

    Zelviene P

    2018-01-01

    Full Text Available Paulina Zelviene, Evaldas Kazlauskas Department of Clinical and Organizational Psychology, Vilnius University, Vilnius, Lithuania Abstract: Adjustment disorder (AjD is among the most often diagnosed mental disorders in clinical practice. This paper reviews current status of AjD research and discusses scientific and clinical issues associated with AjD. AjD has been included in diagnostic classifications for over 50 years. Still, the diagnostic criteria for AjD remain vague and cause difficulties to mental health professionals. Controversies in definition resulted in the lack of reliable and valid measures of AjD. Epidemiological data on prevalence of AjD is scarce and not reliable because prevalence data are biased by the diagnostic algorithm, which is usually developed for each study, as no established diagnostic standards for AjD are available. Considerable changes in the field of AjD could follow after the release of the 11th edition of International Classification of Diseases (ICD-11. A new AjD symptom profile was introduced in ICD-11 with 2 main symptoms as follows: 1 preoccupation and 2 failure to adapt. However, differences between the Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition and ICD-11 AjD diagnostic criteria could result in diverse research findings in the future. The best treatment approach for AjD remains unclear, and further treatment studies are needed to provide AjD treatment guidelines to clinicians. Keywords: adjustment disorder, review, diagnosis, prevalence, treatment, DSM, ICD

  9. Continuously adjustable Pulfrich spectacles

    Science.gov (United States)

    Jacobs, Ken; Karpf, Ron

    2011-03-01

    A number of Pulfrich 3-D movies and TV shows have been produced, but the standard implementation has inherent drawbacks. The movie and TV industries have correctly concluded that the standard Pulfrich 3-D implementation is not a useful 3-D technique. Continuously Adjustable Pulfrich Spectacles (CAPS) is a new implementation of the Pulfrich effect that allows any scene containing movement in a standard 2-D movie, which are most scenes, to be optionally viewed in 3-D using inexpensive viewing specs. Recent scientific results in the fields of human perception, optoelectronics, video compression and video format conversion are translated into a new implementation of Pulfrich 3- D. CAPS uses these results to continuously adjust to the movie so that the viewing spectacles always conform to the optical density that optimizes the Pulfrich stereoscopic illusion. CAPS instantly provides 3-D immersion to any moving scene in any 2-D movie. Without the glasses, the movie will appear as a normal 2-D image. CAPS work on any viewing device, and with any distribution medium. CAPS is appropriate for viewing Internet streamed movies in 3-D.

  10. Adjustment Criterion and Algorithm in Adjustment Model with Uncertain

    Directory of Open Access Journals (Sweden)

    SONG Yingchun

    2015-02-01

    Full Text Available Uncertainty often exists in the process of obtaining measurement data, which affects the reliability of parameter estimation. This paper establishes a new adjustment model in which uncertainty is incorporated into the function model as a parameter. A new adjustment criterion and its iterative algorithm are given based on uncertainty propagation law in the residual error, in which the maximum possible uncertainty is minimized. This paper also analyzes, with examples, the different adjustment criteria and features of optimal solutions about the least-squares adjustment, the uncertainty adjustment and total least-squares adjustment. Existing error theory is extended with new observational data processing method about uncertainty.

  11. Role of Osmotic Adjustment in Plant Productivity

    Energy Technology Data Exchange (ETDEWEB)

    Gebre, G.M.

    2001-01-11

    Successful implementation of short rotation woody crops requires that the selected species and clones be productive, drought tolerant, and pest resistant. Since water is one of the major limiting factors in poplar (Populus sp.) growth, there is little debate for the need of drought tolerant clones, except on the wettest of sites (e.g., lower Columbia River delta). Whether drought tolerance is compatible with productivity remains a debatable issue. Among the many mechanisms of drought tolerance, dehydration postponement involves the maintenance of high leaf water potential due to, for example, an adequate root system. This trait is compatible with productivity, but requires available soil moisture. When the plant leaf water potential and soil water content decline, the plant must be able to survive drought through dehydration tolerance mechanisms, such as low osmotic potential or osmotic adjustment. Osmotic adjustment and low osmotic potential are considered compatible with growth and yield because they aid in the maintenance of leaf turgor. However, it has been shown that turgor alone does not regulate cell expansion or stomatal conductance and, therefore, the role of osmotic adjustment is debated. Despite this finding, osmotic adjustment has been correlated with grain yield in agronomic crop species, and gene markers responsible for osmotic adjustment are being investigated to improve drought tolerance in productive progenies. Although osmotic adjustment and low osmotic potentials have been investigated in several forest tree species, few studies have investigated the relationship between osmotic adjustment and growth. Most of these studies have been limited to greenhouse or container-grown plants. Osmotic adjustment and rapid growth have been specifically associated in Populus and black spruce (Picea mariuna (Mill.) B.S.P.) progenies. We tested whether these relationships held under field conditions using several poplar clones. In a study of two hybrid poplar

  12. Adjustable continence balloons

    DEFF Research Database (Denmark)

    Kjær, Line; Fode, Mikkel; Nørgaard, Nis

    2012-01-01

    Abstract Objective. This study aimed to evaluate the results of the Danish experience with the ProACT urinary continence device inserted in men with stress urinary incontinence. Material and methods. The ProACT was inserted in 114 patients. Data were registered prospectively. The main endpoints...... in urinary leakage > 50% was seen in 72 patients (80%). Complications were seen in 23 patients. All of these were treated successfully by removal of the device in the outpatient setting followed by replacement of the device. Another eight patients had a third balloon inserted to improve continence further....... Fourteen patients (12%) ended up with an artificial sphincter or a urethral sling. Sixty patients (63%) experienced no discomfort and 58 (61%) reported being dry or markedly improved. Overall, 50 patients (53%) reported being very or predominantly satisfied. Conclusions. Adjustable continence balloons seem...

  13. Metric adjusted skew information

    DEFF Research Database (Denmark)

    Hansen, Frank

    2008-01-01

    ) that vanishes for observables commuting with the state. We show that the skew information is a convex function on the manifold of states. It also satisfies other requirements, proposed by Wigner and Yanase, for an effective measure-of-information content of a state relative to a conserved observable. We...... establish a connection between the geometrical formulation of quantum statistics as proposed by Chentsov and Morozova and measures of quantum information as introduced by Wigner and Yanase and extended in this article. We show that the set of normalized Morozova-Chentsov functions describing the possible......We extend the concept of Wigner-Yanase-Dyson skew information to something we call "metric adjusted skew information" (of a state with respect to a conserved observable). This "skew information" is intended to be a non-negative quantity bounded by the variance (of an observable in a state...

  14. Adolescent Mothers' Adjustment to Parenting.

    Science.gov (United States)

    Samuels, Valerie Jarvis; And Others

    1994-01-01

    Examined adolescent mothers' adjustment to parenting, self-esteem, social support, and perceptions of baby. Subjects (n=52) responded to questionnaires at two time periods approximately six months apart. Mothers with higher self-esteem at Time 1 had better adjustment at Time 2. Adjustment was predicted by Time 2 variables; contact with baby's…

  15. HPGe detector shielding adjustment

    International Nuclear Information System (INIS)

    Trnkova, L.; Rulik, P.

    2008-01-01

    Low-level background shielding of HPGe detectors is used mainly for environmental samples with very low content of radionuclides. National Radiation Protection Institute (SURO) in Prague is equipped with 14 HPGe detectors with relative efficiency up to 150%. The detectors are placed in a room built from materials with low content of natural radionuclides and equipped with a double isolation of the floor against radon. Detectors themselves are placed in lead or steel shielding. Steel shielding with one of these detectors with relative efficiency of 100% was chosen to be rebuilt to achieve lower minimum detectable activity (MDA). Additional lead and copper shielding was built up inside the original steel shielding to reduce the volume of the inner space and filled with nitrogen by means of evaporating liquid nitrogen. The additional lead and copper shielding, consequent reduction of the inner volume and supply of evaporated nitrogen, caused a decrease of the background count and accordingly MDA values as well. The effect of nitrogen evaporation on the net areas of peaks belonging to radon daughters is significant. The enhanced shielding adjustment has the biggest influence in low energy range, what can be seen in collected data. MDA values in energy range from 30 keV to 400 keV decreased to 0.65-0.85 of original value, in energy range from 400 keV to 2 MeV they fell to 0.70-0.97 of original value. (authors)

  16. Target Assembly to Check Boresight Alignment of Active Sensors

    Science.gov (United States)

    Ramos-Izquierdo, Luis; Scott, V. Stanley; Riris, Haris; Cavanaugh, John; Liiva, Peter; Rodriguez, Michael

    2011-01-01

    A compact and portable target assembly (Fig. 1) has been developed to measure the boresite alignment of LRO's Lunar Orbiter Laser Altimeter (LOLA) instrument at the spacecraft level. The concept for this target assembly has evolved over many years with earlier versions used to test the Mars Observer Laser Altimeter (MOLA), the Geoscience Laser Altimeter System (GLAS), and the Mercury Laser Altimeter (MLA) space-based instruments.

  17. Frequency adjustable MEMS vibration energy harvester

    Science.gov (United States)

    Podder, P.; Constantinou, P.; Amann, A.; Roy, S.

    2016-10-01

    Ambient mechanical vibrations offer an attractive solution for powering the wireless sensor nodes of the emerging “Internet-of-Things”. However, the wide-ranging variability of the ambient vibration frequencies pose a significant challenge to the efficient transduction of vibration into usable electrical energy. This work reports the development of a MEMS electromagnetic vibration energy harvester where the resonance frequency of the oscillator can be adjusted or tuned to adapt to the ambient vibrational frequency. Micro-fabricated silicon spring and double layer planar micro-coils along with sintered NdFeB micro-magnets are used to construct the electromagnetic transduction mechanism. Furthermore, another NdFeB magnet is adjustably assembled to induce variable magnetic interaction with the transducing magnet, leading to significant change in the spring stiffness and resonance frequency. Finite element analysis and numerical simulations exhibit substantial frequency tuning range (25% of natural resonance frequency) by appropriate adjustment of the repulsive magnetic interaction between the tuning and transducing magnet pair. This demonstrated method of frequency adjustment or tuning have potential applications in other MEMS vibration energy harvesters and micromechanical oscillators.

  18. Frequency adjustable MEMS vibration energy harvester

    International Nuclear Information System (INIS)

    Podder, P; Constantinou, P; Roy, S; Amann, A

    2016-01-01

    Ambient mechanical vibrations offer an attractive solution for powering the wireless sensor nodes of the emerging “Internet-of-Things”. However, the wide-ranging variability of the ambient vibration frequencies pose a significant challenge to the efficient transduction of vibration into usable electrical energy. This work reports the development of a MEMS electromagnetic vibration energy harvester where the resonance frequency of the oscillator can be adjusted or tuned to adapt to the ambient vibrational frequency. Micro-fabricated silicon spring and double layer planar micro-coils along with sintered NdFeB micro-magnets are used to construct the electromagnetic transduction mechanism. Furthermore, another NdFeB magnet is adjustably assembled to induce variable magnetic interaction with the transducing magnet, leading to significant change in the spring stiffness and resonance frequency. Finite element analysis and numerical simulations exhibit substantial frequency tuning range (25% of natural resonance frequency) by appropriate adjustment of the repulsive magnetic interaction between the tuning and transducing magnet pair. This demonstrated method of frequency adjustment or tuning have potential applications in other MEMS vibration energy harvesters and micromechanical oscillators. (paper)

  19. Metric-adjusted skew information

    DEFF Research Database (Denmark)

    Liang, Cai; Hansen, Frank

    2010-01-01

    on a bipartite system and proved superadditivity of the Wigner-Yanase-Dyson skew informations for such states. We extend this result to the general metric-adjusted skew information. We finally show that a recently introduced extension to parameter values 1 ...We give a truly elementary proof of the convexity of metric-adjusted skew information following an idea of Effros. We extend earlier results of weak forms of superadditivity to general metric-adjusted skew information. Recently, Luo and Zhang introduced the notion of semi-quantum states...... of (unbounded) metric-adjusted skew information....

  20. Accurate tool height control by bearing gap adjustment

    NARCIS (Netherlands)

    Wielen, van der A.M.; Schellekens, P.H.J.; Jaartsveld, F.T.M.

    2002-01-01

    Face turning of optical surfaces on precision lathes needs high precision tool height adjustment, which may be a difficult and time-consuming task. In this paper we present a new tool adjustment mechanism based on varying the bearing gap height of the hydrostatic bearings present in precision lathe

  1. A complete generalized adjustment criterion

    NARCIS (Netherlands)

    Perković, Emilija; Textor, Johannes; Kalisch, Markus; Maathuis, Marloes H.

    2015-01-01

    Covariate adjustment is a widely used approach to estimate total causal effects from observational data. Several graphical criteria have been developed in recent years to identify valid covariates for adjustment from graphical causal models. These criteria can handle multiple causes, latent

  2. Parental Divorce and Children's Adjustment.

    Science.gov (United States)

    Lansford, Jennifer E

    2009-03-01

    This article reviews the research literature on links between parental divorce and children's short-term and long-term adjustment. First, I consider evidence regarding how divorce relates to children's externalizing behaviors, internalizing problems, academic achievement, and social relationships. Second, I examine timing of the divorce, demographic characteristics, children's adjustment prior to the divorce, and stigmatization as moderators of the links between divorce and children's adjustment. Third, I examine income, interparental conflict, parenting, and parents well-being as mediators of relations between divorce and children's adjustment. Fourth, I note the caveats and limitations of the research literature. Finally, I consider notable policies related to grounds for divorce, child support, and child custody in light of how they might affect children s adjustment to their parents divorce. © 2009 Association for Psychological Science.

  3. Normal Stress or Adjustment Disorder?

    Science.gov (United States)

    ... disorder is a type of stress-related mental illness that can affect your feelings, thoughts and behaviors. Signs and symptoms of an adjustment disorder can include: Anxiety Poor school or work performance Relationship problems Sadness ...

  4. Adjustable chain trees for proteins

    DEFF Research Database (Denmark)

    Winter, Pawel; Fonseca, Rasmus

    2012-01-01

    A chain tree is a data structure for changing protein conformations. It enables very fast detection of clashes and free energy potential calculations. A modified version of chain trees that adjust themselves to the changing conformations of folding proteins is introduced. This results in much...... tighter bounding volume hierarchies and therefore fewer intersection checks. Computational results indicate that the efficiency of the adjustable chain trees is significantly improved compared to the traditional chain trees....

  5. Electronic gaming and psychosocial adjustment.

    Science.gov (United States)

    Przybylski, Andrew K

    2014-09-01

    The rise of electronic games has driven both concerns and hopes regarding their potential to influence young people. Existing research identifies a series of isolated positive and negative effects, yet no research to date has examined the balance of these potential effects in a representative sample of children and adolescents. The objective of this study was to explore how time spent playing electronic games accounts for significant variation in positive and negative psychosocial adjustment using a representative cohort of children aged 10 to 15 years. A large sample of children and adolescents aged 10 to 15 years completed assessments of psychosocial adjustment and reported typical daily hours spent playing electronic games. Relations between different levels of engagement and indicators of positive and negative psychosocial adjustment were examined, controlling for participant age and gender and weighted for population representativeness. Low levels (3 hours daily) of game engagement was linked to key indicators of psychosocial adjustment. Low engagement was associated with higher life satisfaction and prosocial behavior and lower externalizing and internalizing problems, whereas the opposite was found for high levels of play. No effects were observed for moderate play levels when compared with non-players. The links between different levels of electronic game engagement and psychosocial adjustment were small (Games consistently but not robustly associated with children's adjustment in both positive and negative ways, findings that inform policy-making as well as future avenues for research in the area. Copyright © 2014 by the American Academy of Pediatrics.

  6. Problems of state adjustment the telecommunications industry

    Directory of Open Access Journals (Sweden)

    Tregub Ilona Vladimirovna

    2015-08-01

    Full Text Available The paper presents the mechanism of state adjustment of the telecommunications industry companies, providing the additional mobile services (VAS-services, by determining the optimal rates of tax and non-tax payments to the budget. Method is based on the approach of A. Laffer, who showed the possibility of existence an optimal tax rate, which provides, on the one hand, the maximum flow of funds in the budget, on the other hand, preserves the incentives of entrepreneurship. In the present paper, we study the dependence of revenues to the Reserve Fund on the size of the contribution rate and the coefficient of profitability of enterprises providing VAS-services.

  7. Fiscal Adjustment in IMF-Supported Adjustment Programmes: The ...

    African Journals Online (AJOL)

    Fiscal adjustment is an essential element of macro-economic stability and economic growth. Given that economic growth is the most powerful weapon in the fight for higher living standards, poor growth performance in African countries, has been a challenge to economists, policy makers and international development ...

  8. Acculturation, personality, and psychological adjustment.

    Science.gov (United States)

    Ahadi, Stephan A; Puente-Díaz, Rogelio

    2011-12-01

    Two studies investigated relationships between traditional indicators of acculturation, cultural distance, acculturation strategies, and basic dimensions of personality as they pertain to psychological adjustment among Hispanic students. Although personality characteristics have been shown to be important determinants of psychological well-being, acculturation research has put less emphasis on the role of personality in the well-being of immigrants. Hierarchical regression analysis showed that basic dimensions of personality such as extraversion and neuroticism were strongly related to psychological adjustment. Acculturation strategies did not mediate the effect of personality variables, but cultural resistance made a small, independent contribution to the explanation of some aspects of negative psychological adjustment. The implications of the results were discussed.

  9. GPU Parallel Bundle Block Adjustment

    Directory of Open Access Journals (Sweden)

    ZHENG Maoteng

    2017-09-01

    Full Text Available To deal with massive data in photogrammetry, we introduce the GPU parallel computing technology. The preconditioned conjugate gradient and inexact Newton method are also applied to decrease the iteration times while solving the normal equation. A brand new workflow of bundle adjustment is developed to utilize GPU parallel computing technology. Our method can avoid the storage and inversion of the big normal matrix, and compute the normal matrix in real time. The proposed method can not only largely decrease the memory requirement of normal matrix, but also largely improve the efficiency of bundle adjustment. It also achieves the same accuracy as the conventional method. Preliminary experiment results show that the bundle adjustment of a dataset with about 4500 images and 9 million image points can be done in only 1.5 minutes while achieving sub-pixel accuracy.

  10. Kinematic adjustments to seismic recordings

    Energy Technology Data Exchange (ETDEWEB)

    Telegin, A.N.; Levii, N.V.; Volovik, U.M.

    1981-01-01

    The introduction of kinematic adjustments by adding the displaced blocks is studied theoretically and in test seismograms. The advantage to this method resulting from the weight variation in the trace is demonstrated together with its kinematic drawback. A variation on the displaced block addition method that does not involve realignment of the travel time curves and that has improved amplitude characteristics is proposed.

  11. Risk-adjusted capitation: recent experiences in The Netherlands.

    Science.gov (United States)

    van de Ven, W P; van Vliet, R C; van Barneveld, E M; Lamers, L M

    1994-01-01

    The market-oriented health care reforms taking place in the Netherlands show a clear resemblance to the proposals for managed competition in U.S. health care. In both countries good risk adjustment mechanisms that prevent cream skimming--that is, that prevent plans from selecting the best health risks--are critical to the success of the reforms. In this paper we present an overview of the Dutch reforms and of our research concerning risk-adjusted capitation payments. Although we are optimistic about the technical possibilities for solving the problem of cream skimming, the implementation of good risk-adjusted capitation is a long-term challenge.

  12. Birth-Order Complementarity and Marital Adjustment.

    Science.gov (United States)

    Vos, Cornelia J. Vanderkooy; Hayden, Delbert J.

    1985-01-01

    Tested the influence of birth-order complementarity on marital adjustment among 327 married women using the Spanier Dyadic Adjustment Scale (1976). Birth-order complementarity was found to be unassociated with marital adjustment. (Author/BL)

  13. Automatic compression adjusting mechanism for internal combustion engines

    Science.gov (United States)

    Akkerman, J. W. (Inventor)

    1983-01-01

    Means for controlling the compression pressure in an internal combustion engine having one or more cylinders and subject to widely varying power output requirements are provided. Received between each crank pin and connecting rod is an eccentric sleeve selectively capable of rotation about the crank pin and/or inside the rod and for latching with the rod to vary the effective length of the connecting rod and thereby the clearance volume of the engine. The eccentric normally rotates inside the connecting rod during the exhaust and intake strokes but a latching pawl carried by the eccentric is movable radially outwardly to latch the rod and eccentric together during the compression and power strokes. A control valve responds to intake manifold pressure to time the supply of hydraulic fluid to move the latch-pawl outwardly, varying the effective rod length to maintain a substantially optimum firing chamber pressure at all intake manifold pressures.

  14. Parenting Perfectionism and Parental Adjustment

    OpenAIRE

    Lee, Meghan A.; Schoppe-Sullivan, Sarah J.; Kamp Dush, Claire M.

    2012-01-01

    The parental role is expected to be one of the most gratifying and rewarding roles in life. As expectations of parenting become ever higher, the implications of parenting perfectionism for parental adjustment warrant investigation. Using longitudinal data from 182 couples, this study examined the associations between societal- and self-oriented parenting perfectionism and new mothers’ and fathers’ parenting self-efficacy, stress, and satisfaction. For mothers, societal-oriented parenting perf...

  15. Mexican-origin parents' work conditions and adolescents' adjustment.

    Science.gov (United States)

    Wheeler, Lorey A; Updegraff, Kimberly A; Crouter, Ann

    2015-06-01

    Mexican-origin parents' work experiences are a distal extrafamilial context for adolescents' adjustment. This 2-wave multiinformant study examined the prospective mechanisms linking parents' work conditions (i.e., self-direction, work pressure, workplace discrimination) to adolescents' adjustment (i.e., educational expectations, depressive symptoms, risky behavior) across the transition to high school drawing on work socialization and spillover models. We examined the indirect effects of parental work conditions on adolescent adjustment through parents' psychological functioning (i.e., depressive symptoms, role overload) and aspects of the parent-adolescent relationship (i.e., parental solicitation, parent-adolescent conflict), as well as moderation by adolescent gender. Participants were 246 predominantly immigrant, Mexican-origin, 2-parent families who participated in home interviews when adolescents were approximately 13 and 15 years of age. Results supported the positive impact of fathers' occupational self-direction on all 3 aspects of adolescents' adjustment through decreased father-adolescent conflict, after controlling for family socioeconomic status and earner status, and underemployment. Parental work pressure and discrimination were indirectly linked to adolescents' adjustment, with different mechanisms emerging for mothers and fathers. Adolescents' gender moderated the associations between fathers' self-direction and girls' depressive symptoms, and fathers' experiences of discrimination and boys' risk behavior. Results suggest that Mexican-origin mothers' and fathers' perceptions of work conditions have important implications for multiple domains of adolescents' adjustment across the transition to high school. (c) 2015 APA, all rights reserved).

  16. 12 CFR 19.240 - Inflation adjustments.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Inflation adjustments. 19.240 Section 19.240... PROCEDURE Civil Money Penalty Inflation Adjustments § 19.240 Inflation adjustments. (a) The maximum amount... Civil Penalties Inflation Adjustment Act of 1990 (28 U.S.C. 2461 note) as follows: ER10NO08.001 (b) The...

  17. Adjustable extender for instrument module

    International Nuclear Information System (INIS)

    Sevec, J.B.; Stein, A.D.

    1975-01-01

    A blank extender module used to mount an instrument module in front of its console for repair or test purposes has been equipped with a rotatable mount and means for locking the mount at various angles of rotation for easy accessibility. The rotatable mount includes a horizontal conduit supported by bearings within the blank module. The conduit is spring-biased in a retracted position within the blank module and in this position a small gear mounted on the conduit periphery is locked by a fixed pawl. The conduit and instrument mount can be pulled into an extended position with the gear clearing the pawl to permit rotation and adjustment of the instrument

  18. Adjustable Tooling for Bending Brake

    Science.gov (United States)

    Ellis, J. M.

    1986-01-01

    Deep metal boxes and other parts easily fabricated. Adjustable tooling jig for bending brake accommodates spacing blocks and either standard male press-brake die or bar die. Holds spacer blocks, press-brake die, bar window die, or combination of three. Typical bending operations include bending of cut metal sheet into box and bending of metal strip into bracket with multiple inward 90 degree bends. By increasing free space available for bending sheet-metal parts jig makes it easier to fabricate such items as deep metal boxes or brackets with right-angle bends.

  19. Signalling chains with probe and adjust learning

    Science.gov (United States)

    Gosti, Giorgio

    2018-04-01

    Many models explain the evolution of signalling in repeated stage games on social networks, differently in this study each signalling game evolves a communication strategy to transmit information across the network. Specifically, I formalise signalling chain games as a generalisation of Lewis' signalling games, where a number of players are placed on a chain network and play a signalling game in which they have to propagate information across the network. I show that probe and adjust learning allows the system to develop communication conventions, but it may temporarily perturb the system out of conventions. Through simulations, I evaluate how long the system takes to evolve a signalling convention and the amount of time it stays in it. This discussion presents a mechanism in which simple players can evolve signalling across a social network without necessarily understanding the entire system.

  20. Adjustable speed drives improve circulating water system

    International Nuclear Information System (INIS)

    Dent, R.A.; Dicic, Z.

    1994-01-01

    This paper illustrates the integration of electrical and mechanical engineering requirements to produce a solution to past problems and future operating demands. The application of adjustable speed drives in the modifications of the circulating water system at Indian Point No. 3 Nuclear Power Plant provided increased operating flexibility, efficiency and avoided otherwise costly renovations to the plant electrical systems. Rectification of the original inadequate design of the circulating water system, in addition to maximizing plant efficiency consistent with environmental considerations, formed the basis for this modification. This entailed replacement of all six circulating water pumps and motors and physical modifications to the intake system. This paper details the methodology used in this engineering task. The new system was installed successfully and has been operating reliably and economically for the past eight years

  1. Perceived parenting and adolescents’ adjustment

    Directory of Open Access Journals (Sweden)

    Joana Jaureguizar

    2018-05-01

    Full Text Available Abstract Adolescence is an important developmental period that is characterised by heightened problems of adjustment. The aim of this study is to analyse adolescents’ adjustment, and to explore the typologies and dimensions of parenting, and thus to determine the relationships between these factors. The sample comprised 1285 adolescent students aged 12 to 16 from the Basque Country (Spain. The students filled out the self-report of the Behavior Assessment System for Children (BASC and the Parental Acceptance-Rejection/Control Questionnaire, (PARQ/Control. Differences by age were found in the adolescents’ school maladjustment and parenting style perception. Moreover, perceptions of little parental warmth were related to higher levels of clinical and school maladjustment, and the lower the parental control, the greater the clinical maladjustment. Finally, the results obtained revealed that the interaction between the mothers’ and fathers’ parenting styles was significant only for clinical maladjustment; those students with neglectful mothers and authoritative fathers presented the highest level of clinical maladjustment, followed by other combinations of neglectful mothers. Furthermore, the students from neglectful and authoritarian families presented the highest levels of school maladjustment, without differences between neglectful and authoritarian or between indulgent and authoritative families.

  2. Risk-adjusted capitation: Recent experiences in the Netherlands

    NARCIS (Netherlands)

    W.P.M.M. van de Ven (Wynand); R.C.J.A. van Vliet (René); E.M. van Barneveld (Erik); L.M. Lamers (Leida)

    1994-01-01

    textabstractThe market-oriented health care reforms taking place in the Netherlands show a clear resemblance to the proposals for managed competition in U.S. health care. In both countries good risk adjustment mechanisms that prevent cream skimming--that is, that prevent plans from selecting the

  3. Risk-adjusted capitation: recent experiences in The Netherlands

    NARCIS (Netherlands)

    W.P.M.M. van de Ven (Wynand); E.M. van Barneveld (Erik); L.M. Lamers (Leida); R.C.J.A. van Vliet (René)

    1994-01-01

    textabstractThe market-oriented health care reforms taking place in the Netherlands show a clear resemblance to the proposals for managed competition in U.S. health care. In both countries good risk adjustment mechanisms that prevent cream skimming--that is, that

  4. Culture, emotion regulation, and adjustment.

    Science.gov (United States)

    Matsumoto, David; Yoo, Seung Hee; Nakagawa, Sanae

    2008-06-01

    This article reports differences across 23 countries on 2 processes of emotion regulation--reappraisal and suppression. Cultural dimensions were correlated with country means on both and the relationship between them. Cultures that emphasized the maintenance of social order--that is, those that were long-term oriented and valued embeddedness and hierarchy--tended to have higher scores on suppression, and reappraisal and suppression tended to be positively correlated. In contrast, cultures that minimized the maintenance of social order and valued individual Affective Autonomy and Egalitarianism tended to have lower scores on Suppression, and Reappraisal and Suppression tended to be negatively correlated. Moreover, country-level emotion regulation was significantly correlated with country-level indices of both positive and negative adjustment. (PsycINFO Database Record (c) 2008 APA, all rights reserved).

  5. Theory of Work Adjustment Personality Constructs.

    Science.gov (United States)

    Lawson, Loralie

    1993-01-01

    To measure Theory of Work Adjustment personality and adjustment style dimensions, content-based scales were analyzed for homogeneity and successively reanalyzed for reliability improvement. Three sound scales were developed: inflexibility, activeness, and reactiveness. (SK)

  6. 12 CFR 313.55 - Salary adjustments.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Salary adjustments. 313.55 Section 313.55 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION PROCEDURE AND RULES OF PRACTICE PROCEDURES FOR CORPORATE DEBT COLLECTION Salary Offset § 313.55 Salary adjustments. Any negative adjustment to pay arising...

  7. Do fair value adjustments influence dividend policy?

    NARCIS (Netherlands)

    Goncharov, I.; van Triest, S.

    2011-01-01

    We examine the impact of positive fair value adjustments on dividend policy. If fair value adjustments are transitory in nature and managers are able to assess their implications for future earnings, fair value adjustments in net income is expected to have no distribution consequences. However,

  8. 24 CFR 5.611 - Adjusted income.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Adjusted income. 5.611 Section 5... Serving Persons with Disabilities: Family Income and Family Payment; Occupancy Requirements for Section 8 Project-Based Assistance Family Income § 5.611 Adjusted income. Adjusted income means annual income (as...

  9. 12 CFR 1780.80 - Inflation adjustments.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Inflation adjustments. 1780.80 Section 1780.80... DEVELOPMENT RULES OF PRACTICE AND PROCEDURE RULES OF PRACTICE AND PROCEDURE Civil Money Penalty Inflation Adjustments § 1780.80 Inflation adjustments. The maximum amount of each civil money penalty within OFHEO's...

  10. 7 CFR 1744.64 - Budget adjustment.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false Budget adjustment. 1744.64 Section 1744.64... Disbursement of Funds § 1744.64 Budget adjustment. (a) If more funds are required than are available in a budget account, the borrower may request RUS's approval of a budget adjustment to use funds from another...

  11. An adjustable linear Halbach array

    Energy Technology Data Exchange (ETDEWEB)

    Hilton, J.E., E-mail: James.Hilton@csiro.au [CSIRO Mathematics, Informatics and Statistics, Clayton South, VIC 3169 (Australia); McMurry, S.M. [School of Physics, Trinity College, Dublin (Ireland)

    2012-07-15

    The linear Halbach array is a well-known planar magnetic structure capable, in the idealized case, of generating a one-sided magnetic field. We show that such a field can be created from an array of uniformly magnetized rods, and rotating these rods in an alternating fashion can smoothly transfer the resultant magnetic field through the plane of the device. We examine an idealized model composed of infinite line dipoles and carry out computational simulations on a realizable device using a magnetic boundary element method. Such an arrangement can be used for an efficient latching device, or to produce a highly tunable field in the space above the device. - Highlights: Black-Right-Pointing-Pointer We model an adjustable 'one-sided' flux sheet made up of a series of dipolar magnetic field sources. Black-Right-Pointing-Pointer We show that magnetic field can be switched from one side of sheet to other by a swap rotation of each of magnetic sources. Black-Right-Pointing-Pointer Investigations show that such an arrangement is practical and can easily be fabricated. Black-Right-Pointing-Pointer The design has a wide range of potential applications.

  12. Control of Adjustable Compliant Actuators

    Directory of Open Access Journals (Sweden)

    Berno J.E. Misgeld

    2014-05-01

    Full Text Available Adjustable compliance or variable stiffness actuators comprise an additional element to elastically decouple the actuator from the load and are increasingly applied to human-centered robotic systems. The advantages of such actuators are of paramount importance in rehabilitation robotics, where requirements demand safe interaction between the therapy system and the patient. Compliant actuator systems enable the minimization of large contact forces arising, for example, from muscular spasticity and have the ability to periodically store and release energy in cyclic movements. In order to overcome the loss of bandwidth introduced by the elastic element and to guarantee a higher range in force/torque generation, new actuator designs consider variable or nonlinear stiffness elements, respectively. These components cannot only be adapted to the walking speed or the patient condition, but also entail additional challenges for feedback control. This paper introduces a novel design method for an impedance-based controller that fulfills the control objectives and compares the performance and robustness to a classical cascaded control approach. The new procedure is developed using a non-standard positive-real Η2 controller design and is applied to a loop-shaping approach. Robust norm optimal controllers are designed with regard to the passivity of the actuator load-impedance transfer function and the servo control problem. Classical cascaded and positive-real Η2 controller designs are validated and compared in simulations and in a test bench using a passive elastic element of varying stiffness.

  13. An adjustable linear Halbach array

    International Nuclear Information System (INIS)

    Hilton, J.E.; McMurry, S.M.

    2012-01-01

    The linear Halbach array is a well-known planar magnetic structure capable, in the idealized case, of generating a one-sided magnetic field. We show that such a field can be created from an array of uniformly magnetized rods, and rotating these rods in an alternating fashion can smoothly transfer the resultant magnetic field through the plane of the device. We examine an idealized model composed of infinite line dipoles and carry out computational simulations on a realizable device using a magnetic boundary element method. Such an arrangement can be used for an efficient latching device, or to produce a highly tunable field in the space above the device. - Highlights: ► We model an adjustable ‘one-sided’ flux sheet made up of a series of dipolar magnetic field sources. ► We show that magnetic field can be switched from one side of sheet to other by a swap rotation of each of magnetic sources. ► Investigations show that such an arrangement is practical and can easily be fabricated. ► The design has a wide range of potential applications.

  14. Remotely adjustable fishing jar and method for using same

    International Nuclear Information System (INIS)

    Wyatt, W.B.

    1992-01-01

    This patent describes a method for providing a jarring force to dislodge objects stuck in well bores, the method it comprises: connecting a jarring tool between an operating string and an object in a well bore; selecting a jarring force to be applied to the object; setting the selected reference jarring force into a mechanical memory mechanism by progressively engaging a first latch body and a second latch body; retaining the reference jarring force in the mechanical memory mechanism during diminution of tensional force applied by the operating string; and initiating an upwardly directed impact force within the jarring tool by increasing tensional force on the operating string to a value greater than the tensional force corresponding with the selected jarring force. This patent also describes a remotely adjustable downhole fishing jar apparatus comprising: an operating mandrel; an impact release spring; a mechanical memory mechanism; and releasable latching means

  15. Depletion calculations of adjuster rods in Darlington

    Energy Technology Data Exchange (ETDEWEB)

    Arsenault, B.; Tsang, K., E-mail: benoit.arsenault@amecfw.com, E-mail: kwok.tsang@amecfw.com [AMEC Foster Wheeler, Toronto, ON (Canada)

    2015-07-01

    This paper describes the simulation methodology and reactivity worth calculated for aged adjuster rods in the Darlington core. ORIGEN-S IST was applied to simulate the isotope transmutation process of the stainless steel and titanium adjusters. The compositions were used in DRAGON-IST to calculate the change in incremental properties of aged adjusters. Pre-simulations of the reactivity worth of the stainless steel and titanium adjusters in Darlington were performed using RFSP-IST and the results showed that the titanium adjuster rods exhibit faster reactivity-worth drop than that of stainless steel rods. (author)

  16. Artificial muscles with adjustable stiffness

    International Nuclear Information System (INIS)

    Mutlu, Rahim; Alici, Gursel

    2010-01-01

    This paper reports on a stiffness enhancement methodology based on using a suitably designed contact surface with which cantilevered-type conducting polymer bending actuators are in contact during operation. The contact surface constrains the bending behaviour of the actuators. Depending on the topology of the contact surface, the resistance of the polymer actuators to deformation, i.e. stiffness, is varied. As opposed to their predecessors, these polymer actuators operate in air. Finite element analysis and modelling are used to quantify the effect of the contact surface on the effective stiffness of a trilayer cantilevered beam, which represents a one-end-free, the-other-end-fixed polypyrrole (PPy) conducting polymer actuator under a uniformly distributed load. After demonstrating the feasibility of the adjustable stiffness concept, experiments were conducted to determine the stiffness of bending-type conducting polymer actuators in contact with a range (20–40 mm in radius) of circular contact surfaces. The numerical and experimental results presented demonstrate that the stiffness of the actuators can be varied using a suitably profiled contact surface. The larger the radius of the contact surface is, the higher is the stiffness of the polymer actuators. The outcomes of this study suggest that, although the stiffness of the artificial muscles considered in this study is constant for a given geometric size, and electrical and chemical operation conditions, it can be changed in a nonlinear fashion to suit the stiffness requirement of a considered application. The stiffness enhancement methodology can be extended to other ionic-type conducting polymer actuators

  17. Self-adjustable glasses in the developing world

    Directory of Open Access Journals (Sweden)

    Murthy Gudlavalleti VS

    2014-02-01

    Full Text Available Venkata S Murthy Gudlavalleti,1 Komal Preet Allagh,1 Aashrai SV Gudlavalleti2 1Indian Institute of Public Health, Public Health Foundation of India, Hyderabad, 2Centre for Chronic Disease Control, Public Health Foundation of India, New Delhi, India Abstract: Uncorrected refractive errors are the single largest cause of visual impairment globally. Refractive errors are an avoidable cause of visual impairment that are easily correctable. Provision of spectacles is a cost-effective measure. Unfortunately, this simple solution becomes a public health challenge in low- and middle-income countries because of the paucity of human resources for refraction and optical services, lack of access to refraction services in rural areas, and the cost of spectacles. Low-cost approaches to provide affordable glasses in developing countries are critical. A number of approaches has been tried to surmount the challenge, including ready-made spectacles, the use of focometers and self-adjustable glasses, among other modalities. Recently, self-adjustable spectacles have been validated in studies in both children and adults in developed and developing countries. A high degree of agreement between self-adjustable spectacles and cycloplegic subjective refraction has been reported. Self-refraction has also been found to be less prone to accommodative inaccuracy compared with non-cycloplegic autorefraction. The benefits of self-adjusted spectacles include: the potential for correction of both distance and near vision, applicability for all ages, the empowerment of lay workers, the increased participation of clients, augmented awareness of the mechanism of refraction, reduced costs of optical and refraction units in low-resource settings, and a relative reduction in costs for refraction services. Concerns requiring attention include a need for the improved cosmetic appearance of the currently available self-adjustable spectacles, an increased range of correction (currently

  18. Dwell time adjustment for focused ion beam machining

    International Nuclear Information System (INIS)

    Taniguchi, Jun; Satake, Shin-ichi; Oosumi, Takaki; Fukushige, Akihisa; Kogo, Yasuo

    2013-01-01

    Focused ion beam (FIB) machining is potentially useful for micro/nano fabrication of hard brittle materials, because the removal method involves physical sputtering. Usually, micro/nano scale patterning of hard brittle materials is very difficult to achieve by mechanical polishing or dry etching. Furthermore, in most reported examples, FIB machining has been applied to silicon substrates in a limited range of shapes. Therefore, a versatile method for FIB machining is required. We previously established the dwell time adjustment for mechanical polishing. The dwell time adjustment is calculated by using a convolution model derived from Preston’s hypothesis. More specifically, the target removal shape is a convolution of the unit removal shape, and the dwell time is calculated by means of one of four algorithms. We investigate these algorithms for dwell time adjustment in FIB machining, and we found that a combination a fast Fourier transform calculation technique and a constraint-type calculation is suitable. By applying this algorithm, we succeeded in machining a spherical lens shape with a diameter of 2.93 μm and a depth of 203 nm in a glassy carbon substrate by means of FIB with dwell time adjustment

  19. TREE AGE AS ADJUSTMENT FACTOR TO NDVI

    OpenAIRE

    Elias Fernando Berra; Denise Cybis Fontana; Tatiana Mora Kuplich

    2018-01-01

    ABSTRACT This study aimed to increase satellite-derived Normalized Difference Vegetation Index (NDVI) sensitivity to biophysical parameters changes with aid of a forest age-based adjustment factor. This factor is defined as a ratio between stand age and age of rotation, which value multiplied by Landsat-5/TM-derived NDVI generated the so-called adjusted index NDVI_a. Soil Adjusted Vegetation Index (SAVI) was also calculated. The relationship between these vegetation indices (VI) with Eucalypt...

  20. Neutron spectrum adjustment. The role of covariances

    International Nuclear Information System (INIS)

    Remec, I.

    1992-01-01

    Neutron spectrum adjustment method is shortly reviewed. Practical example dealing with power reactor pressure vessel exposure rates determination is analysed. Adjusted exposure rates are found only slightly affected by the covariances of measured reaction rates and activation cross sections, while the multigroup spectra covariances were found important. Approximate spectra covariance matrices, as suggested in Astm E944-89, were found useful but care is advised if they are applied in adjustments of spectra at locations without dosimetry. (author) [sl

  1. A Simple Measure of Price Adjustment Coefficients.

    OpenAIRE

    Damodaran, Aswath

    1993-01-01

    One measure of market efficiency is the speed with which prices adjust to new information. The author develops a simple approach to estimating these price adjustment coefficients by using the information in return processes. This approach is used to estimate t he price adjustment coefficients for firms listed on the NYSE and the A MEX as well as for over-the-counter stocks. The author finds evidence of a lagged adjustment to new information in shorter return intervals for firms in all market ...

  2. Managerial adjustment and its limits: sequential fault in comparative perspective

    Directory of Open Access Journals (Sweden)

    Flávio da Cunha Rezende

    2008-01-01

    Full Text Available This article focuses on explanations for sequential faults in administrative reform. It deals with the limits of managerial adjustment in an approach that attempts to connect theory and empirical data, articulating three levels of analysis. The first level presents comparative evidence of sequential fault within reforms in national governments through a set of indicators geared toward understanding changes in the role of the state. In light of analyses of a representative set of comparative studies on reform implementation, the second analytical level proceeds to identify four typical mechanisms that are present in explanations on managerial adjustment faults. In this way, we seek to configure an explanatory matrix for theories on sequential fault. Next we discuss the experience of management reform in the Brazilian context, conferring special attention on one of the mechanisms that creates fault: the control dilemma. The major hypotheses that guide our article are that reforms lead to sequential fault and that there are at least four causal mechanisms that produce reforms: a transactions costs involved in producing reforms; b performance legacy; c predominance of fiscal adjustment and d the control dilemma. These mechanisms act separately or in concert, and act to decrease chances for a transformation of State managerial patterns. Major evidence that is analyzed in these articles lend consistency to the general argument that reforms have failed in their attempts to reduce public expenses, alter patterns of resource allocation, reduce the labor force and change the role of the State. Our major conclusion is that reforms fail sequentially and managerial adjustment displays considerable limitations, particularly those of a political nature.

  3. Finite element fatigue analysis of rectangular clutch spring of automatic slack adjuster

    Science.gov (United States)

    Xu, Chen-jie; Luo, Zai; Hu, Xiao-feng; Jiang, Wen-song

    2015-02-01

    The failure of rectangular clutch spring of automatic slack adjuster directly affects the work of automatic slack adjuster. We establish the structural mechanics model of automatic slack adjuster rectangular clutch spring based on its working principle and mechanical structure. In addition, we upload such structural mechanics model to ANSYS Workbench FEA system to predict the fatigue life of rectangular clutch spring. FEA results show that the fatigue life of rectangular clutch spring is 2.0403×105 cycle under the effect of braking loads. In the meantime, fatigue tests of 20 automatic slack adjusters are carried out on the fatigue test bench to verify the conclusion of the structural mechanics model. The experimental results show that the mean fatigue life of rectangular clutch spring is 1.9101×105, which meets the results based on the finite element analysis using ANSYS Workbench FEA system.

  4. Detection technology research on the one-way clutch of automatic brake adjuster

    Science.gov (United States)

    Jiang, Wensong; Luo, Zai; Lu, Yi

    2013-10-01

    In this article, we provide a new testing method to evaluate the acceptable quality of the one-way clutch of automatic brake adjuster. To analysis the suitable adjusting brake moment which keeps the automatic brake adjuster out of failure, we build a mechanical model of one-way clutch according to the structure and the working principle of one-way clutch. The ranges of adjusting brake moment both clockwise and anti-clockwise can be calculated through the mechanical model of one-way clutch. Its critical moment, as well, are picked up as the ideal values of adjusting brake moment to evaluate the acceptable quality of one-way clutch of automatic brake adjuster. we calculate the ideal values of critical moment depending on the different structure of one-way clutch based on its mechanical model before the adjusting brake moment test begin. In addition, an experimental apparatus, which the uncertainty of measurement is ±0.1Nm, is specially designed to test the adjusting brake moment both clockwise and anti-clockwise. Than we can judge the acceptable quality of one-way clutch of automatic brake adjuster by comparing the test results and the ideal values instead of the EXP. In fact, the evaluation standard of adjusting brake moment applied on the project are still using the EXP provided by manufacturer currently in China, but it would be unavailable when the material of one-way clutch changed. Five kinds of automatic brake adjusters are used in the verification experiment to verify the accuracy of the test method. The experimental results show that the experimental values of adjusting brake moment both clockwise and anti-clockwise are within the ranges of theoretical results. The testing method provided by this article vividly meet the requirements of manufacturer's standard.

  5. Correlational indicators of psychosocial adjustment among senior ...

    African Journals Online (AJOL)

    There was a significant joint contribution of the independent variables (sense of coherence, optimism and self-efficacy) to the prediction of psychosocial adjustment. This suggested that the three independent variables combined accounted for 30.4% (Adj.R2= .304) variation in the prediction of psychosocial adjustment.

  6. Parenting Styles and Adjustment in Gifted Children

    Science.gov (United States)

    Pilarinos, Vassiliki; Solomon, C. R.

    2017-01-01

    The present study examined the relationship between parenting styles and the psychosocial adjustment of 48 children aged 7 to 11 years, each of whom had been identified as gifted on the basis of a score of 130 or above on the Wechsler Intelligence Scale for Children--Fourth Edition. Parenting styles and child psychosocial adjustment were measured…

  7. 14 CFR Appendix - Example of SIFL Adjustment

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Example of SIFL Adjustment Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) POLICY STATEMENTS... taxes for rate purposes. Pt. 399, Subpt. C, Example Example of SIFL Adjustment [Methodology for...

  8. relationship between parenting styles and marital adjustment

    African Journals Online (AJOL)

    PROF. BARTH EKWEME

    positive and significant joint relationship between the parenting styles and marital adjustment of married ... correlate significantly with marital adjustment of married teachers in secondary ... In other words, it refers to the management of ... dealing with each other so as to reduce ill-feeling. ..... Behavior exchange in happy.

  9. Psychologica and social adjustment to blindness: Understanding ...

    African Journals Online (AJOL)

    Psychologica and social adjustment to blindness: Understanding from two groups of blind people in Ilorin, Nigeria. ... Background: Blindness can cause psychosocial distress leading to maladjustment if not mitigated. Maladjustment is a secondary burden that further reduces quality of life of the blind. Adjustment is often ...

  10. 28 CFR 11.7 - Salary adjustments.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Salary adjustments. 11.7 Section 11.7 Judicial Administration DEPARTMENT OF JUSTICE DEBT COLLECTION Administration of Debt Collection § 11.7 Salary adjustments. The following debts shall not be subject to the salary offset procedures of § 11.8...

  11. Sickness presence, sick leave and adjustment latitude

    Directory of Open Access Journals (Sweden)

    Joachim Gerich

    2014-10-01

    Full Text Available Objectives: Previous research on the association between adjustment latitude (defined as the opportunity to adjust work efforts in case of illness and sickness absence and sickness presence has produced inconsistent results. In particular, low adjustment latitude has been identified as both a risk factor and a deterrent of sick leave. The present study uses an alternative analytical strategy with the aim of joining these results together. Material and Methods: Using a cross-sectional design, a random sample of employees covered by the Upper Austrian Sickness Fund (N = 930 was analyzed. Logistic and ordinary least square (OLS regression models were used to examine the association between adjustment latitude and days of sickness absence, sickness presence, and an estimator for the individual sickness absence and sickness presence propensity. Results: A high level of adjustment latitude was found to be associated with a reduced number of days of sickness absence and sickness presence, but an elevated propensity for sickness absence. Conclusions: Employees with high adjustment latitude experience fewer days of health complaints associated with lower rates of sick leave and sickness presence compared to those with low adjustment latitude. In case of illness, however, high adjustment latitude is associated with a higher pro­bability of taking sick leave rather than sickness presence.

  12. 7 CFR 718.110 - Adjustments.

    Science.gov (United States)

    2010-01-01

    ... MARKETING QUOTAS, ACREAGE ALLOTMENTS, AND PRODUCTION ADJUSTMENT PROVISIONS APPLICABLE TO MULTIPLE PROGRAMS... in order to avoid a marketing quota penalty if such person: (1) Notifies the county committee of such... committee; and (2) Pays the cost of a farm inspection to determine the adjusted acreage prior to the date...

  13. Does Fall History Influence Residential Adjustments?

    Science.gov (United States)

    Leland, Natalie; Porell, Frank; Murphy, Susan L.

    2011-01-01

    Purpose of the study: To determine whether reported falls at baseline are associated with an older adult's decision to make a residential adjustment (RA) and the type of adjustment made in the subsequent 2 years. Design and Methods: Observations (n = 25,036) were from the Health and Retirement Study, a nationally representative sample of…

  14. 10 CFR 905.34 - Adjustment provisions.

    Science.gov (United States)

    2010-01-01

    ... continue to take place based on existing contract/marketing criteria principles. ... 10 Energy 4 2010-01-01 2010-01-01 false Adjustment provisions. 905.34 Section 905.34 Energy DEPARTMENT OF ENERGY ENERGY PLANNING AND MANAGEMENT PROGRAM Power Marketing Initiative § 905.34 Adjustment...

  15. relationship between parenting styles and marital adjustment

    African Journals Online (AJOL)

    PROF. BARTH EKWEME

    The relationship between permissive parenting style and marital adjustment was also very low, positive and insignificant. There was a low, positive and significant joint relationship between the parenting styles and marital adjustment of married teachers in secondary schools in Obio/Akpor Local Government Area of Rivers ...

  16. Equity Mispricing and Leverage Adjustment Costs

    NARCIS (Netherlands)

    Warr, R.S.; Elliott, W.B.; Koeter-Kant, J.; Oztekin, O.

    2012-01-01

    We find that equity mispricing impacts the speed at which firms adjust to their target leverage (TL) and does so in predictable ways depending on whether the firm is over- or underlevered. For example, firms that are above their TL and should therefore issue equity (or retire debt) adjust more

  17. Consanguineous Marriage and Marital Adjustment in Turkey.

    Science.gov (United States)

    Fisiloglu, Hurol

    2001-01-01

    Investigates the relationship between consanguineous marriage and marital adjustment in Turkey. The results of the study show that the consanguineous marriage group had significantly lower marital adjustment and had more conflict with extended family than the nonconsanguineous marriage group. The finding is discussed in the context of research and…

  18. Religiousity, Spirituality and Adolescents' Self-Adjustment

    Science.gov (United States)

    Japar, Muhammad; Purwati

    2014-01-01

    Religiuosity, spirituality, and adolescents' self-adjustment. The objective of this study is to test the correlation among religiosity, spirituality and adolescents' self-adjustment. A quantitative approach was employed in this study. Data were collected from 476 junior high schools students of 13 State Junior High Schools and one Junior High…

  19. Adjustment Following Disability: Representative Case Studies.

    Science.gov (United States)

    Heinemann, Allen W.; Shontz, Franklin C.

    1984-01-01

    Examined adjustment following physical disability using the representative case method with two persons with quadriplegia. Results highlighted the importance of previously established coping styles as well as the role of the environment in adjustment. Willingness to mourn aided in later growth. (JAC)

  20. Adjustment of the Internal Tax Scale

    CERN Multimedia

    2013-01-01

    In application of Article R V 2.03 of the Staff Regulations, the internal tax scale has been adjusted with effect on 1 January 2012. The new scale may be consulted via the CERN Admin e-guide.  The notification of internal annual tax certificate for the financial year 2012 takes into account this adjustment. HR Department (Tel. 73907)

  1. Adjustable Speed Drives - Future Challenges and Applications

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Thoegersen, Paul

    2004-01-01

    The main trends within Adjustable Drives in industrial and appliance applications for the next decade are discussed based on the newest developments seen on the market and a few historical trends. Different drive configurations are presented and the general demands to adjustable speed drives...

  2. The tension adjuster used at the work line of electron beam radiation cross-linking wire and cable

    International Nuclear Information System (INIS)

    Zhang Yingfa; Liu Zhenhao; Yin Xuejun

    1999-01-01

    The tension adjuster is an important equipment in the transport system at the work line of electron beam radiation cross-linking wire and cable to realize the velocity synchronism. There are many kinds of the adjuster. By putting various adjusters together properly, the authors can keep the line work stable and raise the quality of the product. Two kinds of standing adjuster and their mechanism are introduced. Also the corresponding figures and formulas are shown

  3. Cultural Distance Asymmetry in Expatriate Adjustment

    DEFF Research Database (Denmark)

    Selmer, Jan; Chiu, Randy K.; Shenkar, Oded

    2007-01-01

    of the assignment. Design/methodology/approach - Using a two-flow sample of US expatriates in Germany and German expatriates in the USA, we examine and compare the psychological and socio-cultural adjustment of each group of executives. Findings - Controlling for the length of assignment, we find that German...... expatriates in the USA were better adjusted, both socio-culturally and psychologically, than American expatriates in Germany. These results support the asymmetry hypothesis and call into question previous findings attesting to the relationship between CD and expatriate adjustment. Originality......Purpose - The current literature implicitly assumes a symmetric impact of cultural distance (CD) on expatriate adjustment. By using distance as a predictor of adjustment, the literature has rendered the direction of the flow irrelevant: a US expatriate in Germany is presumed to face the same hurdle...

  4. Premorbid adjustment and neuropsychological performance in schizophrenia.

    Science.gov (United States)

    Silverstein, Marshall L; Mavrolefteros, George; Close, David

    2002-01-01

    To examine the relationship between premorbid adjustment and neuropsychological deficit in schizophrenia, this report examined retrospective ratings of social and school adjustment during three age epochs (childhood, early adolescence, and late adolescence) as predictors of neurocognitive performance in 61 clinically and pharmacologically stabilized schizophrenia outpatients. Results indicated greater cognitive deficits when premorbid adjustment was unfavorable, particularly for measures of attention and executive functions. Premorbid number and quality of peer relationships and psychosocial adaptation to the school environment were more closely related to neuropsychological performance during adulthood than were premorbid withdrawal and premorbid academic performance. Early onset of poor premorbid adjustment rather than deterioration from childhood to adolescence was associated with greater neuropsychological disturbance in adulthood. It is suggested that childhood onset of premorbid deficits in selective areas of social and academic adjustment appears to influence the cognitive performance seen in adult schizophrenia. This study is consistent with findings from other related reports; it extends these findings to a larger and clinically stabilized sample.

  5. Adjustment and mental health problem in prisoners

    Directory of Open Access Journals (Sweden)

    Sudhinta Sinha

    2010-01-01

    Full Text Available Background : "Crime" is increasing day by day in our society not only in India but also all over the world. In turn, the number of prisoners is also increasing at the same rate. They remain imprisoned for a long duration or in some cases for the whole life. Living in a prison for long time becomes difficult for all inmates. So they often face adjustment and mental health problems. Recent findings suggest that mental illness rate in prison is three times higher than in the general population. Objective: The aim of the present study was to investigate the adjustment and the mental health problem and its relation in the prisoners. Materials and Methods : In the present study, 37 male prisoners of district jail of Dhanbad District of Jharkhand were selected on purposive sampling basis. Each prisoner was given specially designed Performa - Personal Data Sheet, General Health Questionnaire-12 and Bell Adjustment Inventory. Appropriate statistical tools were used to analyze the data. Results: The results obtained showed poor adjustment in social and emotional areas on the adjustment scale. The study also revealed a significant association between adjustment and mental health problem in the prisoners. Conclusion: The prisoners were found to have poor social and emotional adjustment which has strong association with their mental health.

  6. 39 CFR 3010.25 - Limitation on unused rate adjustment authority rate adjustments.

    Science.gov (United States)

    2010-07-01

    ... only be applied together with inflation-based limitation rate adjustments or when inflation-based... used in lieu of an inflation-based limitation rate adjustment. ... 39 Postal Service 1 2010-07-01 2010-07-01 false Limitation on unused rate adjustment authority...

  7. Adjustment to Cancer: Anxiety and Distress (PDQ)

    Science.gov (United States)

    ... with adjustment disorders. Individual (one-to-one) and group counseling have been shown to help cancer patients with ... to-one) counseling. Couple and family counseling. Crisis counseling. Group therapy. Self-help groups. Other treatments used to ...

  8. Theatre Practice and Social Adjustment in Nigeria

    African Journals Online (AJOL)

    Nneka Umera-Okeke

    Media Sociology Lecturer ... adjustments in favour of local processes to drive social and economic .... needs the need to meet the requirements of all motivated efficiency, a certain degree of .... Centre for Production of Tourism, Arts and Culture.

  9. Annual adjustments to 2015 financial benefits

    CERN Multimedia

    HR Department

    2015-01-01

    In accordance with recommendations made by the Finance Committee and decisions taken by Council in December 2014, no adjustments have been made to basic salaries and stipends, subsistence allowances or family benefits as at 1 January 2015.

  10. Annual adjustments to 2016 financial benefits

    CERN Multimedia

    HR Department

    2016-01-01

    In accordance with recommendations made by the Finance Committee and decisions taken by the Council in December 2015, no adjustments have been made to basic salaries and stipends, subsistence allowances or family benefits as at 1 January 2016.  

  11. Annual adjustments to 2014 financial benefits

    CERN Multimedia

    2013-01-01

    In accordance with recommendations made by the Finance Committee and decisions taken by Council in December 2013, no adjustments have been made to basic salaries and stipends, subsistence allowances or family benefits as at 1 January 2014. HR Department

  12. Marital Adjustment and Psychological Distress in Japan

    Science.gov (United States)

    Li, Angela; Robustelli, Briana L.; Whisman, Mark A.

    2016-01-01

    This study was conducted to examine the association between marital adjustment and psychological distress in a large, probability sample of married adults in Japan (N = 710) from the Midlife Development in Japan (MIDJA) study. Results indicate that positive and negative dimensions of marital adjustment were significantly associated with dimensional and categorical measures of psychological distress. Furthermore, the associations between marital adjustment and psychological distress remained significant when statistically controlling for neuroticism, quality of friend and family relationships, and demographic variables. These results demonstrate that the well-established association between marital adjustment and psychological distress found in European-American countries is also found in Japan. Findings support continued research on marital functioning and psychological distress in East Asian countries. PMID:28082761

  13. Speed of adjustment: Evidence from Borsa Istanbul

    Directory of Open Access Journals (Sweden)

    Emrah Arioglu

    2014-06-01

    Full Text Available In this study, we investigate the speed of adjustment for leverage ratios of firms listed on Borsa Istanbul, in order to investigate the prediction of the trade-off theory, regarding capital structure rebalancing. For this purpose, we estimate the speed of adjustment by using Generalized Method of Moments system estimation technique. The results of this estimation suggest the speed of adjustment as approximately 29%. This significant speed of adjustment is consistent with the prediction of trade-off theory, which suggests that firms follow target capital structures and when the firms' leverage ratios deviate from these targets; they make financial decisions with the goal of closing the gap between the previous year's leverage and target leverage of the current period.

  14. Adjustment model of thermoluminescence experimental data

    International Nuclear Information System (INIS)

    Moreno y Moreno, A.; Moreno B, A.

    2002-01-01

    This model adjusts the experimental results for thermoluminescence according to the equation: I (T) = I (a i * exp (-1/b i * (T-C i )) where: a i , b i , c i are the i-Th peak adjusted to a gaussian curve. The adjustments of the curve can be operated manual or analytically using the macro function and the solver.xla complement installed previously in the computational system. In this work it is shown: 1. The information of experimental data from a LiF curve obtained from the Physics Institute of UNAM which the data adjustment model is operated in the macro type. 2. A LiF curve of four peaks obtained from Harshaw information simulated in Microsoft Excel, discussed in previous works, as a reference not in macro. (Author)

  15. Annual adjustments to 2013 financial benefits

    CERN Multimedia

    2013-01-01

    In accordance with recommendations made by the Finance Committee and decisions taken by Council in December 2012, no adjustments have been made to basic salaries and stipends, subsistence allowances or family benefits as at 1 January 2013. HR Department

  16. Determinants of intercultural adjustment among expatriate spouses

    NARCIS (Netherlands)

    Ali, Anees; Van der Zee, K.I.; Sanders, G

    The adaptation of expatriate families to a host country seems crucial to successful fulfilment of international business assignments. The present study focused on personality, family characteristics and characteristics of expatriates' work life as determinants of the intercultural adjustment of

  17. Price Changes, Resource Adjustments and Rational Expectations

    DEFF Research Database (Denmark)

    Hoffmann, Kira

    This study investigates the relationship between the accuracy of managerial demand expectations, resource adjustment decisions and selling price changes. In line with rational expectation theory, it is argued that managers adjust resources and selling prices differently in response to expected...... that cost elasticity is higher when a demand decrease is expected among companies with similar exposure to demand uncertainty. Overall, this implies that managerial competences in predicting future demand significantly determines firms’ profitability; especially when demand uncertainty is high...

  18. Actively adjustable step-type ultrasonic horns in longitudinal vibration

    Science.gov (United States)

    Lin, Shuyu; Guo, Hao; Xu, Jie

    2018-04-01

    Actively adjustable longitudinal step-type ultrasonic horns are proposed and studied. The horn is composed of a traditional ultrasonic horn and piezoelectric material. In practical applications, this kind of step-type ultrasonic horn is mechanically excited by an ultrasonic transducer and the piezoelectric material is connected to an adjustable electric impedance. In this research, the effects of the electric impedance and of the location of the piezoelectric material on the performance of the horn are studied. It is shown that when the electric resistance is increased, the resonance frequency of the horn is increased; the displacement magnification is increased when the piezoelectric material is located in the large end and decreased when the piezoelectric material is located in the small end of the horn. The displacement magnification for the piezoelectric material in the large end is larger than that for the piezoelectric material in the small end of the horn. Some step-type ultrasonic horns are designed and manufactured; the resonance frequency and the displacement magnification are measured by means of POLYTEC Laser Scanning vibrometer. It is shown that the theoretical resonance frequency and the displacement magnification are in good agreement with the measured results. It is concluded that by means of the insertion of the piezoelectric material in the longitudinal horn, the horn performance can be adjusted by changing the electric impedance and the location of the piezoelectric material in the horn. It is expected that this kind of adjustable ultrasonic horns can be used in traditional and potential ultrasonic technologies where the vibrational performance adjustment is needed.

  19. Adjustable bipod flexures for mounting mirrors in a space telescope.

    Science.gov (United States)

    Kihm, Hagyong; Yang, Ho-Soon; Moon, Il Kweon; Yeon, Jeong-Heum; Lee, Seung-Hoon; Lee, Yun-Woo

    2012-11-10

    A new mirror mounting technique applicable to the primary mirror in a space telescope is presented. This mounting technique replaces conventional bipod flexures with flexures having mechanical shims so that adjustments can be made to counter the effects of gravitational distortion of the mirror surface while being tested in the horizontal position. Astigmatic aberration due to the gravitational changes is effectively reduced by adjusting the shim thickness, and the relation between the astigmatism and the shim thickness is investigated. We tested the mirror interferometrically at the center of curvature using a null lens. Then we repeated the test after rotating the mirror about its optical axis by 180° in the horizontal setup, and searched for the minimum system error. With the proposed flexure mount, the gravitational stress at the adhesive coupling between the mirror and the mount is reduced by half that of a conventional bipod flexure for better mechanical safety under launch loads. Analytical results using finite element methods are compared with experimental results from the optical interferometer. Vibration tests verified the mechanical safety and optical stability, and qualified their use in space applications.

  20. Topics in data adjustment theory and applications

    International Nuclear Information System (INIS)

    Hwang, R.N.

    1988-01-01

    The methodologies of the uncertainty analysis and data adjustment have been well-developed and widely used abroad since the early 70's. With limited amount of covariance data on the differential cross section and the integral experiments available at the time, their accomplishments are, indeed, astounding. The fundamental adjustment equations, however, remain qualitatively unchanged. For the past few year, extensive efforts on these subjects have also begun at ANL in order to utilize the massive amount of integral experiments accumulated over years to provide the basis for improving the reactor parameters encountered in various design calculations. Pertinent covariance matrices and sensitivity matrices of the existing integral experiments have been evaluated and systematically compiled in the data files along with the cross section covariance data derived from the ENDF-B/V for the 21 group structure currently under consideration. A production code GMADJ that provides the adjusted quantities for a large number of cross section types has been developed by Poenitz for routine applications. The primary purpose of the present paper is to improve understanding of the application oriented issues important to the data adjustment theory and the subsequent usage of the adjusted quantities in the design calculations in support of these activities. 30 refs., 12 figs., 5 tabs

  1. Adjustment of the 235U Fission Spectrum

    International Nuclear Information System (INIS)

    GRIFFIN, PATRICK J.; WILLIAMS, J.G.

    1999-01-01

    The latest nuclear data are used to examine the sensitivity of the least squares adjustment of the 235 U fission spectrum to the measured reaction rates, dosimetry cross sections, and prior spectrum covariance matrix. All of these parameters were found to be very important in the spectrum adjustment. The most significant deficiency in the nuclear data is the absence of a good prior covariance matrix. Covariance matrices generated from analytic models of the fission spectra have been used in the past. This analysis reveals some unusual features in the covariance matrix produced with this approach. Specific needs are identified for improved nuclear data to better determine the 235 U spectrum. An improved 235 U covariance matrix and adjusted spectrum are recommended for use in radiation transport sensitivity analyses

  2. Adjustments to financial and social benefits

    CERN Multimedia

    HR Department

    2010-01-01

    In accordance with recommendations made by the Finance Committee in November 2009 and decisions taken by the Council in December 2009, certain financial benefits have been adjusted with effect from 1 January 2010. An increase of 1.6% has been applied to the scale of basic salaries and to stipends paid to Fellows (Annexes R A 5 and R A 6 of the Staff Rules and Regulations, respectively). The adjusted amounts are available from the HR Department intranet site or from departmental secretariats. As a result of the evolution of the Geneva consumer price index, no adjustments have been made to the subsistence allowances of Paid Associates and Students (Annex R A 7 of the Staff Rules and Regulations). The following social benefits also remain unchanged: Family, child and infant allowances (Annex R A 3 of the Staff Rules and Regulations). Payment ceilings of education fees (Annex R A 4 of the Staff Rules and Regulations). Tel. 70674 (Classification and Remuneration Service)

  3. Attachment style and adjustment to divorce.

    Science.gov (United States)

    Yárnoz-Yaben, Sagrario

    2010-05-01

    Divorce is becoming increasingly widespread in Europe. In this study, I present an analysis of the role played by attachment style (secure, dismissing, preoccupied and fearful, plus the dimensions of anxiety and avoidance) in the adaptation to divorce. Participants comprised divorced parents (N = 40) from a medium-sized city in the Basque Country. The results reveal a lower proportion of people with secure attachment in the sample group of divorcees. Attachment style and dependence (emotional and instrumental) are closely related. I have also found associations between measures that showed a poor adjustment to divorce and the preoccupied and fearful attachment styles. Adjustment is related to a dismissing attachment style and to the avoidance dimension. Multiple regression analysis confirmed that secure attachment and the avoidance dimension predict adjustment to divorce and positive affectivity while preoccupied attachment and the anxiety dimension predicted negative affectivity. Implications for research and interventions with divorcees are discussed.

  4. Speed of adjustment and market structure

    International Nuclear Information System (INIS)

    Lanza, A.

    1991-01-01

    This paper studies the relationship between changes in costs and prices in the gasoline market in the Federal Republic of Germany for the period 1980-90. We shall use an econometric model, and distinguish two stages in the transmission of cost changes to prices. The first is the adjustment of gasoline prices ex-refinery to changes in the price of crude oil, and the second is the adjustment of gasoline price (net of taxes) at the pump to ex-refinery prices. The study of price adjustments to cost changes involves the analysis of two inter-related but different phenomena. The first is the speed of adjustment, defined here as the mean of the length of the time periods required for the transmission of the full effect of an exogenous shock from the independent to the dependent variable of the econometric model used in the analysis. The second relates to possible asymmetries in the response of prices to increases and decreases in costs. Both phenomena are closely related to the structure of the market. The common assumption is that the first is negatively correlated to the degree of competition, and that the second is an indication of the prevailing market structure. The main findings of this paper are as follows: (a) at the refinery level there is only weak evidence of asymmetrical reaction; the average lag in case of crude price increases or decreases is about three months; (b) at the consumers' level, the speed of adjustment was lower when the ex-refinery price was declining than when it was rising; the adjustment lag was about 6.07 months when ex-refinery prices were declining and 5.37 months when they were rising. (author)

  5. Incorporating Comorbidity Within Risk Adjustment for UK Pediatric Cardiac Surgery.

    Science.gov (United States)

    Brown, Katherine L; Rogers, Libby; Barron, David J; Tsang, Victor; Anderson, David; Tibby, Shane; Witter, Thomas; Stickley, John; Crowe, Sonya; English, Kate; Franklin, Rodney C; Pagel, Christina

    2017-07-01

    When considering early survival rates after pediatric cardiac surgery it is essential to adjust for risk linked to case complexity. An important but previously less well understood component of case mix complexity is comorbidity. The National Congenital Heart Disease Audit data representing all pediatric cardiac surgery procedures undertaken in the United Kingdom and Ireland between 2009 and 2014 was used to develop and test groupings for comorbidity and additional non-procedure-based risk factors within a risk adjustment model for 30-day mortality. A mixture of expert consensus based opinion and empiric statistical analyses were used to define and test the new comorbidity groups. The study dataset consisted of 21,838 pediatric cardiac surgical procedure episodes in 18,834 patients with 539 deaths (raw 30-day mortality rate, 2.5%). In addition to surgical procedure type, primary cardiac diagnosis, univentricular status, age, weight, procedure type (bypass, nonbypass, or hybrid), and era, the new risk factor groups of non-Down congenital anomalies, acquired comorbidities, increased severity of illness indicators (eg, preoperative mechanical ventilation or circulatory support) and additional cardiac risk factors (eg, heart muscle conditions and raised pulmonary arterial pressure) all independently increased the risk of operative mortality. In an era of low mortality rates across a wide range of operations, non-procedure-based risk factors form a vital element of risk adjustment and their presence leads to wide variations in the predicted risk of a given operation. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

  6. Mitral valve repair with adjustable ring annuloplasty.

    Science.gov (United States)

    Andreas, Martin; Haberl, Thomas; Paul Werner, Paul Werner; Guri, Jani; Kocher, Alfred; Hamza, Ouafa; Podesser, Bruno; Laufer, Guenther

    2018-02-28

    We demonstrate the technical aspects of a novel adjustable mitral ring. This new ring was implanted in a female landrace pig, for training and educational purposes. It can be adjusted independently in the P1, P2 and P3 segments, if required, to treat  recurrent mitral regurgitation, and this is a key difference to comparable devices. The first-in-man implantation is anticipated in the near future. © The Author 2016. Published by MMCTS on behalf of the European Association for Cardio-Thoracic Surgery. All rights reserved.

  7. Simultaneous neutron and gamma spectrum adjustment

    International Nuclear Information System (INIS)

    Remec, I.

    1996-01-01

    The spectrum adjustment procedure was extended to simultaneous neutron and gamma spectrum adjustment, and the feasibility of this technique is demonstrated in the analysis of HFIR dosimetry experiments. Conditions in which gamma rays may contribute considerably to radiation damage in steels are discussed. Beryllium helium accumulation fluence monitors (HAFMs) were found to be good monitors in gamma fields of intensities high enough to contribute to steel embrittlement. Use of 237 Np, 238 U, and 9 Be HAFM as gamma dosimeters is proposed for high-dose irradiations in high-energy, high-intensity gamma fields

  8. [Adjustment disorder and DSM-5: A review].

    Science.gov (United States)

    Appart, A; Lange, A-K; Sievert, I; Bihain, F; Tordeurs, D

    2017-02-01

    This paper exposes the complexity and discrete characteristic of the adjustment disorder with reference to its clinical and scientific diagnosis. Even though the disorder occurs in frequent clinical circumstances after important life events, such as mobbing, burn-out, unemployment, divorce or separation, pregnancy denial, surgical operation or cancer, the adjustment disorder is often not considered in the diagnosis since better known disorders with similar symptoms prevail, such as major depression and anxiety disorder. Ten years ago, Bottéro had already noticed that the adjustment disorder diagnosis remained rather uncommon with reference to patients he was working with while Langlois assimilated this disorder with an invisible diagnosis. In order to maximize the data collection, we used the article review below and challenged their surveys and results: National Center for Biotechnology Information (NBCI - Pubmed) for international articles and Cairn.info for French literature. Moreover, we targeted the following keywords on the search engine and used articles, which had been published from 1 February 1975 to 31 January 2015: "adjustment", "adjustment disorder" and the French translation "trouble de l'adaptation". One hundred and ninety-one articles matched our search criteria. However, after a closer analysis, solely 105 articles were selected as being of interest. Many articles were excluded since they were related to non-psychiatric fields induced by the term "adaptation". Indeed, the number of corresponding articles found for the adjustment disorder literally pointed-out the lack of existing literature on that topic in comparison to more known disorders such as anxiety disorder (2661 articles) or major depression (5481 articles). This represents up to 50 times more articles in comparison to the number of articles we found on adjustment disorder and up to 20 times more articles for the eating disorder (1994), although the prevalence is not significantly

  9. Cultural similarity and adjustment of expatriate academics

    DEFF Research Database (Denmark)

    Selmer, Jan; Lauring, Jakob

    2009-01-01

    The findings of a number of recent empirical studies of business expatriates, using different samples and methodologies, seem to support the counter-intuitive proposition that cultural similarity may be as difficult to adjust to as cultural dissimilarity. However, it is not obvious...... and non-EU countries. Results showed that although the perceived cultural similarity between host and home country for the two groups of investigated respondents was different, there was neither any difference in their adjustment nor in the time it took for them to become proficient. Implications...

  10. Analysis of adjusting effects of mounting force on frequency conversion of mounted nonlinear optics.

    Science.gov (United States)

    Su, Ruifeng; Liu, Haitao; Liang, Yingchun; Lu, Lihua

    2014-01-10

    Motivated by the need to increase the second harmonic generation (SHG) efficiency of nonlinear optics with large apertures, a novel mounting configuration with active adjusting function on the SHG efficiency is proposed and mechanically and optically studied. The adjusting effects of the mounting force on the distortion and stress are analyzed by the finite element methods (FEM), as well as the contribution of the distortion and stress to the change in phase mismatch, and the SHG efficiency are theoretically stated. Further on, the SHG efficiency is calculated as a function of the mounting force. The changing trends of the distortion, stress, and the SHG efficiency with the varying mounting force are obtained, and the optimal ones are figured out. Moreover, the mechanism of the occurrence of the optimal values is studied and the adjusting strategy is put forward. Numerical results show the robust adjustment of the mounting force, as well as the effectiveness of the mounting configuration, in increasing the SHG efficiency.

  11. Sperm competition risk drives rapid ejaculate adjustments mediated by seminal fluid.

    Science.gov (United States)

    Bartlett, Michael J; Steeves, Tammy E; Gemmell, Neil J; Rosengrave, Patrice C

    2017-10-31

    In many species, males can make rapid adjustments to ejaculate performance in response to sperm competition risk; however, the mechanisms behind these changes are not understood. Here, we manipulate male social status in an externally fertilising fish, chinook salmon ( Oncorhynchus tshawytscha ), and find that in less than 48 hr, males can upregulate sperm velocity when faced with an increased risk of sperm competition. Using a series of in vitro sperm manipulation and competition experiments, we show that rapid changes in sperm velocity are mediated by seminal fluid and the effect of seminal fluid on sperm velocity directly impacts paternity share and therefore reproductive success. These combined findings, completely consistent with sperm competition theory, provide unequivocal evidence that sperm competition risk drives plastic adjustment of ejaculate quality, that seminal fluid harbours the mechanism for the rapid adjustment of sperm velocity and that fitness benefits accrue to males from such adjustment.

  12. Heterogeneity in the Speed of Adjustment toward Target Leverage

    DEFF Research Database (Denmark)

    Elsas, Ralf; Florysiak, David

    2011-01-01

    Estimating the speed of adjustment toward target leverage using the standard partial adjustment model assumes that all firms within the sample adjust at the same (average) pace. Dynamic capital structure theory predicts heterogeneity in adjustment speed due to firm-specific adjustment costs. Appl...

  13. Do Daily Retail Gasoline Prices adjust Asymmetrically?

    NARCIS (Netherlands)

    L.J.H. Bettendorf (Leon); S.A. van der Geest (Stéphanie); G. Kuper

    2005-01-01

    textabstractThis paper analyzes adjustments in the Dutch retail gasoline prices. We estimate an error correction model on changes in the daily retail price for gasoline (taxes excluded) for the period 1996-2004 taking care of volatility clustering by estimating an EGARCH model. It turns out the

  14. Do daily retail gasoline prices adjust asymmetrically?

    NARCIS (Netherlands)

    Bettendorf, L.; van der Geest, S. A.; Kuper, G. H.

    2009-01-01

    This paper analyses adjustments in the Dutch retail gasoline prices. We estimate an error correction model on changes in the daily retail price for gasoline (taxes excluded) for the period 1996-2004, taking care of volatility clustering by estimating an EGARCH model. It turns out that the volatility

  15. [Relationship between family variables and conjugal adjustment].

    Science.gov (United States)

    Jiménez-Picón, Nerea; Lima-Rodríguez, Joaquín-Salvador; Lima-Serrano, Marta

    2018-04-01

    To determine whether family variables, such as type of relationship, years of marriage, existence of offspring, number of members of family, stage of family life cycle, transition between stages, perceived social support, and/or stressful life events are related to conjugal adjustment. A cross-sectional and correlational study using questionnaires. Primary care and hospital units of selected centres in the province of Seville, Spain. Consecutive stratified sampling by quotas of 369 heterosexual couples over 18years of age, who maintained a relationship, with or without children, living in Seville. A self-report questionnaire for the sociodemographic variables, and the abbreviated version of the Dyadic Adjustment Scale, Questionnaire MOS Perceived Social Support, and Social Readjustment Rating Scale, were used. Descriptive and inferential statistics were performed with correlation analysis and multivariate regression. Statistically significant associations were found between conjugal adjustment and marriage years (r=-10: Pfamily life cycle (F=2.65; Pfamily life cycle stage (mature-aged stage) on conjugal adjustment (R2=.21; F=9.9; df=356; Prelationship. Copyright © 2017 Elsevier España, S.L.U. All rights reserved.

  16. Stress and adjustment in diabetes mellitus.

    Science.gov (United States)

    Parveen, S; Singh, S B

    1999-01-01

    Stress and adjustment in diabetics is studied in order to know the influence of maladjustment and stress in the causation of the disease. The sample of study consists of 100 diabetics patients, 100 nonpsychosomatic and 100 normal person. Results obtained are discussed in detail. It is concluded that maladjustment and stress are important contributing factors in' diabetes mellitus.

  17. Stochastic Strategy Adjustment in Coordination Games

    NARCIS (Netherlands)

    Kosfeld, M.

    1999-01-01

    We explore a model of equilibrium selection in coordination games, where agents stochastically adjust their strategies to changes in their local environment. Instead of playing perturbed best-response, we assume that agents follow a rule of "switching to better strategies more likely". We relate

  18. Associations between faith, distress and mental adjustment

    DEFF Research Database (Denmark)

    Johannessen-Henry, Christine Tind

    2013-01-01

    = −0.79, CI −0.92; −0.66) and increased adjustment to cancer (fighting spirit, anxious preoccupation, helplessness-hopelessness). Specific aspects of faith were associated with high confusion-bewilderment and tension-anxiety, but also lower score on vigor-activity, and with higher anxious...

  19. Macroeconomic shocks and firms' labor adjustment

    DEFF Research Database (Denmark)

    Eriksson, Tor

    2013-01-01

    This article discusses some recent research which aims at producing evidence on how firms adjust their employment in response to output shocks using micro-level data and with a particular focus on the relationship between worker and job flows. The evidence presented is mainly based on Danish data...

  20. Social Adjustment and Personality Development in Children.

    Science.gov (United States)

    Roff, Merrill; And Others

    This book describes a series of studies included in a 5-year program of research on the social adjustment of school children in the third through sixth grades. The sample consists of a total of 40,000 children from Texas and Minnesota, including a small subsample of 5,000 used in a 4-year longitudinal study. Peer acceptance-rejection scores…

  1. Work Adjustment of Vocational Education Teachers.

    Science.gov (United States)

    Muncrief, Martha Crawford

    To investigate work adjustment of vocational education teachers, a nation-wide study was conducted focusing on vocational needs, job satisfaction, and job success. The study involved 180 secondary teachers from three vocational areas, business, home economics, and industrial education. A multistage sampling process was utilized to select…

  2. Extendable linearised adjustment model for deformation analysis

    NARCIS (Netherlands)

    Hiddo Velsink

    2015-01-01

    Author supplied: "This paper gives a linearised adjustment model for the affine, similarity and congruence transformations in 3D that is easily extendable with other parameters to describe deformations. The model considers all coordinates stochastic. Full positive semi-definite covariance matrices

  3. Extendable linearised adjustment model for deformation analysis

    NARCIS (Netherlands)

    Velsink, H.

    2015-01-01

    This paper gives a linearised adjustment model for the affine, similarity and congruence transformations in 3D that is easily extendable with other parameters to describe deformations. The model considers all coordinates stochastic. Full positive semi-definite covariance matrices and correlation

  4. An Adjustment Restriction on Fish Quota

    NARCIS (Netherlands)

    Dijk, van Diana; Hendrix, E.M.T.; Haijema, Rene; Groeneveld, R.A.; Ierland, van E.C.

    2017-01-01

    Management objectives of the European Union for North Sea fish stocks are shifting towards considering both biological sustainability and economic benefits. As part of multiannual management plans, an adjustment restriction on fish quota has been introduced. Its objective is to obtain an

  5. Output filters for AC adjustable speed drives

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Hanigovszki, Norbert; Landkildehus, Jorn, Jorn

    2007-01-01

    The standard industrial solution for adjustable speed drives (ASD) is the use of induction motors (IM) fed by voltage-source inverters (VSI). The inverter generates a pulsewidth modulated (PWM) voltage, with dv/dt values of about 6 kV/¿s or even more. In three-leg inverters for three-phase appli...

  6. 49 CFR 1135.1 - Quarterly adjustment.

    Science.gov (United States)

    2010-10-01

    ... subsequent amendments thereto. In addition, the AAR shall calculate the productivity-adjusted RCAF as..., the Association of American Railroads (AAR) shall calculate and file with the Board by the fifth day... all-inclusive index of railroad costs and calculate and file the RCAF unadjusted for changes in...

  7. Gender Differences in International Students' Adjustment

    Science.gov (United States)

    Lee, Seungcheol Austin; Park, Hee Sun; Kim, Wonsun

    2009-01-01

    As gender roles in the society are being rapidly redefined, female students today are showing outstanding academic prowess and pursuing higher education. The current study recruited Korean international students (n = 76) enrolled in universities in the US and examined gender differences in academic adjustment. The findings of the current study…

  8. 22 CFR 142.44 - Academic adjustments.

    Science.gov (United States)

    2010-04-01

    ... services and actions. Recipients need not provide attendants, individually prescribed devices, readers for... adjustments. (a) Academic requirements. A recipient to which this subpart applies shall make such... applicant or student. Academic requirements that the recipient can demonstrate are essential to the...

  9. 45 CFR 605.44 - Academic adjustments.

    Science.gov (United States)

    2010-10-01

    ... impairments, and other similar services and actions. Recipients need not provide attendents, individually... Postsecondary Education § 605.44 Academic adjustments. (a) Academic requirements. A recipient to which this..., against a qualified handicapped applicant or student. Academic requirements that the recipient can...

  10. 15 CFR 8b.22 - Academic adjustments.

    Science.gov (United States)

    2010-01-01

    ... actions. Recipients need not provide attendants, individually prescribed devices, readers for personal use... Secondary Education § 8b.22 Academic adjustments. (a) Academic requirements. A recipient to which this..., against a qualified handicapped applicant or student. Academic requirements that the recipient can...

  11. 24 CFR 882.410 - Rent adjustments.

    Science.gov (United States)

    2010-04-01

    ... PROGRAM) SECTION 8 MODERATE REHABILITATION PROGRAMS Special Procedures for Moderate Rehabilitation-Basic... Annual Adjustment Factor by the base rents. However, if the amounts borrowed to finance the rehabilitation costs or to finance purchase of the property are subject to a variable rate or are otherwise...

  12. 19 CFR 201.205 - Salary adjustments.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 3 2010-04-01 2010-04-01 false Salary adjustments. 201.205 Section 201.205 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION GENERAL RULES OF GENERAL APPLICATION Debt... of coverage, or a change in coverage, under a Federal benefits program requiring periodic deductions...

  13. Predictors of College Adjustment among Hispanic Students

    Science.gov (United States)

    Yazedjian, Ani; Toews, Michelle L.

    2006-01-01

    The purpose of this study is to assess personal and interpersonal predictors of college adjustment among a sample of 190 first-year Hispanic students. Specifically, we examined the extent to which personal factors such as self-esteem, acculturation, and ethnic identity and interpersonal factors such as parental education and parental attachment…

  14. Psychosocial Adjustment Needs of Menopausal Women | Dimkpa ...

    African Journals Online (AJOL)

    The purpose of this study was to examine the psychosocial adjustment needs of menopausal women. The population of the study consisted of 623 menopausal women who were out-patients in Federal Medical Centre and a private hospital in Yenagoa Local Government Area, Bayelsa State of. Nigeria. The sample ...

  15. Host country language ability and expatriate adjustment

    DEFF Research Database (Denmark)

    Selmer, Jan; Lauring, Jakob

    2015-01-01

    countries, one with an easy, relatively simple language and the other with a difficult, highly complex language. Consistent with Goal-Setting Theory, results indicated a relative advantage of expatriates’ language ability in terms of their adjustment in the host country with the difficult language...

  16. Vietnamese Graduate International Student Repatriates: Reverse Adjustment

    Science.gov (United States)

    Le, Anh T.; LaCost, Barbara Y.

    2017-01-01

    The purpose of this study is to explore the experiences of Vietnamese international students who have returned to Vietnam after graduation from a U.S. higher education institution. The findings suggest that participants found it harder to readjust to Vietnam than to adjust to the U.S. even though they had lived most of their lives in Vietnam. Time…

  17. Stabilization and structural adjustment in Mozambique

    DEFF Research Database (Denmark)

    Tarp, Finn; Arndt, Channing; Jensen, Henning Tarp

    2000-01-01

    This paper outlines the complex historical legacy and structural adjustment efforts in Mozambique in addition to reviewing recent economic developments. An in-depth analysis of new and more reliable national accounts data show that macroeconomic stabilization has occurred through recovery from...

  18. Occupational adjustment of immigrants in the Netherlands

    NARCIS (Netherlands)

    Zorlu, A.

    2013-01-01

    This article examines the speed of the occupational adjustment of immigrants using Labour Force Surveys 2004 and 2005 from Statistics Netherlands. The analysis provides new evidence that immigrants start with jobs at the lower levels of skill distribution. Their occupational achievement improves

  19. Premium adjustment: actuarial analysis on epidemiological models ...

    African Journals Online (AJOL)

    In this paper, we analyse insurance premium adjustment in the context of an epidemiological model where the insurer's future financial liability is greater than the premium from patients. In this situation, it becomes extremely difficult for the insurer since a negative reserve would severely increase its risk of insolvency, ...

  20. Inflation - Adjusted Accounting and Corporate Value Redefinition ...

    African Journals Online (AJOL)

    This paper, therefore, addresses the twisty advocacy and seeming intricacy of Inflation-Adjusted Accounting Systems (IAAS), with a view to illuminating the translational hurdles. The results abundantly necessitate the expeditious consolidation of a more robust framework to fix impending inhibitors such as lack of awareness, ...

  1. The academic adjustment scale : Measuring the adjustment of permanent resident or sojourner students

    NARCIS (Netherlands)

    Anderson, Joel R.; Guan, Yao; Koc, Yasin

    In this paper we developed and validated the Academic Adjustment Scale (AAS) - a new scale for measuring academic adjustment, which was developed with a focus on student sojourners who temporarily relocate to a new culture for the purpose of tertiary education, but also is validated for use with

  2. The Interplay of Work-Family Life and Psychosocial Adjustment for International Graduate Students

    OpenAIRE

    Bulgan, Gökçe; Çiftçi, Ayşe

    2017-01-01

    The purpose of this paper is to critically review the literature on the interplay of work-family life and psychosocial adjustment of married international graduate students to the United States, provide evidence for a complicated and integrated support mechanism for married international graduate students, and make specific recommendations. Empirical studies on student and expatriate work-family life and psychosocial adjustment are reviewed. Studies indicated a significant negative relationsh...

  3. Individual and crossover effects of stress on adjustment in medical student marriages.

    Science.gov (United States)

    Katz, J; Monnier, J; Libet, J; Shaw, D; Beach, S R

    2000-07-01

    High-stress individuals may benefit from social support, although their support providers may be adversely affected via stress crossover effects. Individual and crossover effects of perceived stress within medical student marriages (n = 30) were investigated. Perceived spousal support was positively associated with individuals' own marital and emotional adjustment, attenuating stress effects. With regard to crossover effects, medical students' perceived stress was significantly associated with their spouses' emotional adjustment. Further, medical students' own emotional adjustment fully mediated this crossover effect. Results suggest that the contagion of negative affect may serve as a key mechanism through which stress crossover effects operate in marriage.

  4. Should adjustment disorder be conceptualized as transitional disorder? In pursuit of adjustment disorders definition.

    Science.gov (United States)

    Israelashvili, Moshe

    2012-12-01

    The DSM classification of an adjustment disorder is frequently criticized for not being well differentiated from other disorders. A possible reason for this is the vague definition of the term adjustment in social science literature. Hence, the current paper discusses the definition of adjustment and its implications for understanding maladjustment. Differential definitions of the terms adjustment, adaptation, socialization and coping are outlined, leading to the proposition that each one of them represents a different type of demand that is imposed on an individual who encounters a transitional event. Moreover, the four types of demands might be the possible sources of maladjustment. Helping people in transition requires an identification of the source, or combination of sources, that have led to the adjustment problem first, followed by the implementation of an adequate helping approach.

  5. Cultural Novelty and Adjustment: Western Business Expatriates in China

    DEFF Research Database (Denmark)

    Selmer, Jan

    2006-01-01

    Western business expatriates in China. Three sociocultural adjustment variables were examined; general, interaction and work adjustment. Although a negative relationship was hypothesized between cultural novelty and the three adjustment variables, results of the hierarchical multiple regression analysis...

  6. Medications for Sleep Schedule Adjustments in Athletes.

    Science.gov (United States)

    Baird, Matthew B; Asif, Irfan M

    Sleep schedule adjustments are common requirements of modern-day athletes. Many nonpharmacologic and pharmacologic strategies exist to facilitate circadian rhythm shifts to maximize alertness and performance during competition. This review summarizes the evidence for commonly used pharmacologic agents and presents recommendations for the sports medicine provider. MEDLINE searches were performed using the following keywords: sleep aids, circadian rhythm adjustment, athletes and sleep, caffeine and sports, melatonin and athletes, and sleep aids and sports. Pertinent articles were extracted and discussed. Clinical review. Level 2. There are very few available studies investigating pharmacologic sleep aids in athletes. Data from studies involving shift workers and airline personnel are more abundant and were used to formulate recommendations and conclusions. Melatonin, caffeine, and nonbenzodiazepine sleep aids have a role in facilitating sleep schedule changes in athletes and maximizing sports performance through sleep enhancement.

  7. Nuclear Data Parameter Adjustment BNL-INL

    International Nuclear Information System (INIS)

    Palmiotti, G.; Hoblit, S.; Herman, M.; Nobre, G.P.A.; Palumbo, A.; Hiruta, H.; Salvatores, M.

    2013-01-01

    This presentation reports on the consistent adjustment of nuclear data parameters performed within a BNL-INL collaboration. The main advantage compared to the classical adjustment of multigroup constants is to provide final nuclear data constrained by the nuclear reaction theory and consistent with both differential and integral measurements. The feasibility of a single-isotope assimilation was tested on a few priority materials ( 23 Na, 56 Fe, 105 Pd, 235,238 U, 239 Pu) using a selection of clean integral experiments. The multi-isotope assimilation is under study for the Big-3 ( 235,238 U, 239 Pu). This work shows that a consistent assimilation is feasible, but there are pitfalls to avoid (e.g. non-linearity, cross section fluctuations) and prerequisites (e.g. realistic covariances, good prior, realistic weighting of differential and integral experiments). Finally, only all experimental information combined with the state of the art modelling may provide a 'right' answer

  8. Article mounting and position adjustment stage

    Science.gov (United States)

    Cutburth, Ronald W.; Silva, Leonard L.

    1988-01-01

    An improved adjustment and mounting stage of the type used for the detection of laser beams is disclosed. A ring sensor holder has locating pins on a first side thereof which are positioned within a linear keyway in a surrounding housing for permitting reciprocal movement of the ring along the keyway. A rotatable ring gear is positioned within the housing on the other side of the ring from the linear keyway and includes an oval keyway which drives the ring along the linear keyway upon rotation of the gear. Motor-driven single-stage and dual (x, y) stage adjustment systems are disclosed which are of compact construction and include a large laser transmission hole.

  9. Home Away Home: Better Understanding of the Role of Social Support in Predicting Cross-Cultural Adjustment among International Students

    Science.gov (United States)

    Baba, Yoko; Hosoda, Megumi

    2014-01-01

    Numerous studies have examined international students' adjustment problems, yet, these studies have not explored the mechanisms through which social support operates in the context of stressful events in predicting cross-cultural adjustment among international students. Using Barrera's (1988) models of social support, the present study…

  10. Adjusted Money's Worth Ratios in Life Annuities

    OpenAIRE

    Jaime Casassus; Eduardo Walker

    2013-01-01

    The Money's Worth Ratio (MWR) measures an annuity's actuarial fairness. It is calculated as the discounted present value of expected future payments divided by its cost. We argue that from the perspective of annuitants, this measure may overestimate the value-for-money obtained, since it does not adjust for liquidity or risk factors. Measuring these factors is challenging, requiring detailed knowledge of assets, liabilities, and of the stochastic processes followed by them. Using a multi-fact...

  11. Underwriters' view of risk - An adjuster's perspective

    International Nuclear Information System (INIS)

    Smith, M.

    1992-01-01

    This paper reviews how a risk assessment is performed by an insurance adjuster to determine rates and insurability of a client. It provides a historical perspective on insurance and how information systems are used to monitor past claims to determine future risk. Although this paper does not specifically address the oil and gas industry, it is informative in identifying how insurance rates are determined and risk assessments for various oil and gas operations are performed

  12. Markup cyclicality, employment adjustment, and financial constraints

    OpenAIRE

    Askildsen, Jan Erik; Nilsen, Øivind Anti

    2001-01-01

    We investigate the existence of markups and their cyclical behaviour. Markup is not directly observed. Instead, it is given as a price-cost relation that is estimated from a dynamic model of the firm. The model incorporates potential costly employment adjustments and takes into consideration that firms may be financially constrained. When considering size of the future labour stock, financially constrained firms may behave as if they have a higher discount factor, which may affect the realise...

  13. Adjustment problems and residential care environment

    OpenAIRE

    Jan Sebastian Novotný

    2015-01-01

    Problem: Residential care environment represents a specific social space that is associated with a number of negative consequences, covering most aspects of children and youth functioning. The paper analyzes of the presence of adjustment problems among adolescents from institutional care environment and compares this results with a population of adolescents who grew up in a family. Methods: The sample consisted of two groups of adolescents. The first group included 285 adolescents currently g...

  14. Learning-parameter adjustment in neural networks

    Science.gov (United States)

    Heskes, Tom M.; Kappen, Bert

    1992-06-01

    We present a learning-parameter adjustment algorithm, valid for a large class of learning rules in neural-network literature. The algorithm follows directly from a consideration of the statistics of the weights in the network. The characteristic behavior of the algorithm is calculated, both in a fixed and a changing environment. A simple example, Widrow-Hoff learning for statistical classification, serves as an illustration.

  15. Adjustment of nursing home quality indicators

    Directory of Open Access Journals (Sweden)

    Hirdes John P

    2010-04-01

    Full Text Available Abstract Background This manuscript describes a method for adjustment of nursing home quality indicators (QIs defined using the Center for Medicaid & Medicare Services (CMS nursing home resident assessment system, the Minimum Data Set (MDS. QIs are intended to characterize quality of care delivered in a facility. Threats to the validity of the measurement of presumed quality of care include baseline resident health and functional status, pattern of comorbidities, and facility case mix. The goal of obtaining a valid facility-level estimate of true quality of care should include adjustment for resident- and facility-level sources of variability. Methods We present a practical and efficient method to achieve risk adjustment using restriction and indirect and direct standardization. We present information on validity by comparing QIs estimated with the new algorithm to one currently used by CMS. Results More than half of the new QIs achieved a "Moderate" validation level. Conclusions Given the comprehensive approach and the positive findings to date, research using the new quality indicators is warranted to provide further evidence of their validity and utility and to encourage their use in quality improvement activities.

  16. Player Modeling for Intelligent Difficulty Adjustment

    Science.gov (United States)

    Missura, Olana; Gärtner, Thomas

    In this paper we aim at automatically adjusting the difficulty of computer games by clustering players into different types and supervised prediction of the type from short traces of gameplay. An important ingredient of video games is to challenge players by providing them with tasks of appropriate and increasing difficulty. How this difficulty should be chosen and increase over time strongly depends on the ability, experience, perception and learning curve of each individual player. It is a subjective parameter that is very difficult to set. Wrong choices can easily lead to players stopping to play the game as they get bored (if underburdened) or frustrated (if overburdened). An ideal game should be able to adjust its difficulty dynamically governed by the player’s performance. Modern video games utilise a game-testing process to investigate among other factors the perceived difficulty for a multitude of players. In this paper, we investigate how machine learning techniques can be used for automatic difficulty adjustment. Our experiments confirm the potential of machine learning in this application.

  17. Adjustments to financial and social benefits

    CERN Document Server

    HR Department

    2009-01-01

    In accordance with decisions taken by the Finance Committee and Council in December 2008, certain financial and social benefits will be adjusted with effect from 1st January 2009. An increase of 2.7% will be applied to the scale of basic salaries and the scale of stipends paid to Fellows (Annexes R A 5 and R A 6 of the Staff Rules and Regulations, respectively). As a result of the evolution of the Geneva consumer price index, the following financial elements will increase by 3.2%: a) Family Allowance, Child Allowance and Infant Allowance (Annex R A 3 of the Staff Rules and Regulations) b) Payment of education fees: payment ceilings (Annex R A 4 of the Staff Rules and Regulations) for the academic year 2008/2009. As a result of the evolution of the Geneva consumer price index, adjustments will be applied to the subsistence allowances of Paid Associates and Students. The adjusted amounts are available in Departmental Secretariats. Human Resources Department Tel. 70674

  18. Husbands' perceptions of their wives' breast cancer coping efficacy: testing congruence models of adjustment.

    Science.gov (United States)

    Merluzzi, Thomas V; Martinez Sanchez, MaryAnn

    2018-01-01

    Recent reviews have reinforced the notion that having a supportive spouse can help with the process of coping with and adjusting to cancer. Congruence between spouses' perspectives has been proposed as one mechanism in that process, yet alternative models of congruence have not been examined closely. This study assessed alternative models of congruence in perceptions of coping and their mediating effects on adjustment to breast cancer. Seventy-two women in treatment for breast cancer and their husbands completed measures of marital adjustment, self-efficacy for coping, and adjustment to cancer. Karnofsky Performance Status was obtained from medical records. Wives completed a measure of self-efficacy for coping (wives' ratings of self-efficacy for coping [WSEC]) and husbands completed a measure of self-efficacy for coping (husbands' ratings of wives' self-efficacy for coping [HSEC]) based on their perceptions of their wives' coping efficacy. Interestingly, the correlation between WSEC and HSEC was only 0.207; thus, they are relatively independent perspectives. The following three models were tested to determine the nature of the relationship between WSEC and HSEC: discrepancy model (WSEC - HSEC), additive model (WSEC + HSEC), and multiplicative model (WSEC × HSEC). The discrepancy model was not related to wives' adjustment; however, the additive ( B =0.205, P <0.001) and multiplicative ( B =0.001, P <0.001) models were significantly related to wives' adjustment. Also, the additive model mediated the relationship between performance status and adjustment. Husbands' perception of their wives' coping efficacy contributed marginally to their wives' adjustment, and the combination of WSEC and HSEC mediated the relationship between functional status and wives' adjustment, thus positively impacting wives' adjustment to cancer. Future research is needed to determine the quality of the differences between HSEC and WSEC in order to develop interventions to optimize the

  19. Mechanics without mechanisms

    Science.gov (United States)

    Eisenthal, Joshua

    2018-05-01

    At the time of Heinrich Hertz's premature death in 1894, he was regarded as one of the leading scientists of his generation. However, the posthumous publication of his treatise in the foundations of physics, Principles of Mechanics, presents a curious historical situation. Although Hertz's book was widely praised and admired, it was also met with a general sense of dissatisfaction. Almost all of Hertz's contemporaries criticized Principles for the lack of any plausible way to construct a mechanism from the "hidden masses" that are particularly characteristic of Hertz's framework. This issue seemed especially glaring given the expectation that Hertz's work might lead to a model of the underlying workings of the ether. In this paper I seek an explanation for why Hertz seemed so unperturbed by the difficulties of constructing such a mechanism. In arriving at this explanation, I explore how the development of Hertz's image-theory of representation framed the project of Principles. The image-theory brings with it an austere view of the "essential content" of mechanics, only requiring a kind of structural isomorphism between symbolic representations and target phenomena. I argue that bringing this into view makes clear why Hertz felt no need to work out the kinds of mechanisms that many of his readers looked for. Furthermore, I argue that a crucial role of Hertz's hypothesis of hidden masses has been widely overlooked. Far from acting as a proposal for the underlying structure of the ether, I show that Hertz's hypothesis ruled out knowledge of such underlying structure.

  20. The Student's Adjustment Inventory Manual | Tanyi | IFE PsychologIA

    African Journals Online (AJOL)

    The term school adjustment according to this study relates directly to personality formation of a child at school. Personality also here refers to stable behaviors in the process of adjustment. Stable forms of adjustment or adaptations can be regarded as traits of personality. School adjustment therefore, is a behavioural pattern ...

  1. 13 CFR 315.6 - Firm eligibility for Adjustment Assistance.

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Firm eligibility for Adjustment..., DEPARTMENT OF COMMERCE TRADE ADJUSTMENT ASSISTANCE FOR FIRMS General Provisions § 315.6 Firm eligibility for Adjustment Assistance. (a) Firms participate in the Trade Adjustment Assistance for Firms program in...

  2. 26 CFR 1.1368-2 - Accumulated adjustments account (AAA).

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 11 2010-04-01 2010-04-01 true Accumulated adjustments account (AAA). 1.1368-2... adjustments account (AAA). (a) Accumulated adjustments account—(1) In general. The accumulated adjustments account is an account of the S corporation and is not apportioned among shareholders. The AAA is relevant...

  3. 78 FR 5722 - Civil Monetary Penalty Inflation Adjustment

    Science.gov (United States)

    2013-01-28

    ... Civil Monetary Penalty Inflation Adjustment AGENCY: U.S. Army Corps of Engineers, DoD. ACTION: Direct... for inflation. The adjustment of civil penalties to account for inflation is required by the Federal Civil Penalties Inflation Adjustment Act of 1990, as amended. Since we have not made any adjustments to...

  4. 12 CFR 263.65 - Civil penalty inflation adjustments.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 3 2010-01-01 2010-01-01 false Civil penalty inflation adjustments. 263.65... Money Penalties § 263.65 Civil penalty inflation adjustments. (a) Inflation adjustments. In accordance with the Federal Civil Penalties Inflation Adjustment Act of 1990 (28 U.S.C. 2461 note), the Board has...

  5. 76 FR 74625 - Civil Monetary Penalties Inflation Adjustment

    Science.gov (United States)

    2011-12-01

    ...-2011] RIN 1125-AA69 Civil Monetary Penalties Inflation Adjustment AGENCIES: U.S. Customs and Border... adjust for inflation certain civil monetary penalties assessed under the Immigration and Nationality Act... assessed under the INA. The Federal Civil Penalties Inflation Adjustment Act of 1990 (Adjustment Act...

  6. Adjustment problems and residential care environment

    Directory of Open Access Journals (Sweden)

    Jan Sebastian Novotný

    2015-01-01

    Full Text Available Problem: Residential care environment represents a specific social space that is associated with a number of negative consequences, covering most aspects of children and youth functioning. The paper analyzes of the presence of adjustment problems among adolescents from institutional care environment and compares this results with a population of adolescents who grew up in a family. Methods: The sample consisted of two groups of adolescents. The first group included 285 adolescents currently growing up in an residential care environment, aged 13 to 21 (M = 16.23, SD = 1.643. The second group consisted of 214 adolescents growing up in a family, aged 15 to 20 (M = 17.07, SD = 1.070. We used a questionnaire Youth Self Report. Data were analyzed using descriptive statistics and MANOVA. Results: Results showed that adolescents in residential care exhibit higher average values in all adjustment problems. Also, in the context of diagnostic categories are the residential care adolescents more frequently in non-normal range (borderline and clinical, primarily in the border range. The greatest differences were reflected in the Thought problems and Rule-breaking behavior. MANOVA showed a significant multivariate effect between groups of adolescents, Hotelling's T = .803, F(8, 490 = 49.202, p <.001, d = .445 (large effect. Univariate analysis further showed a significant effect for Withdrawn/depressed (p = .044, d = .089, small effect, Somatic complaints (p = .002, d = .139, medium effect, Social problems (p = 004, d = .127, a small effect, Thought problems (p <.001, d = .633, strong effect, Attention problems (p <.001, d = .320,strong effect, Rule-breaking behavior (p <.001 , d = .383, strong effect, and Aggressive behavior (p = 015, d = .110, small effect. Results for the dimension of Anxious/depressed were not significant (p = .159. Discussion: The results didn’t confirmed the assumption that more than 30% of residential care adolescents have adjustment

  7. MODULAR BUNDLE ADJUSTMENT FOR PHOTOGRAMMETRIC COMPUTATIONS

    Directory of Open Access Journals (Sweden)

    N. Börlin

    2018-05-01

    Full Text Available In this paper we investigate how the residuals in bundle adjustment can be split into a composition of simple functions. According to the chain rule, the Jacobian (linearisation of the residual can be formed as a product of the Jacobians of the individual steps. When implemented, this enables a modularisation of the computation of the bundle adjustment residuals and Jacobians where each component has limited responsibility. This enables simple replacement of components to e.g. implement different projection or rotation models by exchanging a module. The technique has previously been used to implement bundle adjustment in the open-source package DBAT (Börlin and Grussenmeyer, 2013 based on the Photogrammetric and Computer Vision interpretations of Brown (1971 lens distortion model. In this paper, we applied the technique to investigate how affine distortions can be used to model the projection of a tilt-shift lens. Two extended distortion models were implemented to test the hypothesis that the ordering of the affine and lens distortion steps can be changed to reduce the size of the residuals of a tilt-shift lens calibration. Results on synthetic data confirm that the ordering of the affine and lens distortion steps matter and is detectable by DBAT. However, when applied to a real camera calibration data set of a tilt-shift lens, no difference between the extended models was seen. This suggests that the tested hypothesis is false and that other effects need to be modelled to better explain the projection. The relatively low implementation effort that was needed to generate the models suggest that the technique can be used to investigate other novel projection models in photogrammetry, including modelling changes in the 3D geometry to better understand the tilt-shift lens.

  8. Modular Bundle Adjustment for Photogrammetric Computations

    Science.gov (United States)

    Börlin, N.; Murtiyoso, A.; Grussenmeyer, P.; Menna, F.; Nocerino, E.

    2018-05-01

    In this paper we investigate how the residuals in bundle adjustment can be split into a composition of simple functions. According to the chain rule, the Jacobian (linearisation) of the residual can be formed as a product of the Jacobians of the individual steps. When implemented, this enables a modularisation of the computation of the bundle adjustment residuals and Jacobians where each component has limited responsibility. This enables simple replacement of components to e.g. implement different projection or rotation models by exchanging a module. The technique has previously been used to implement bundle adjustment in the open-source package DBAT (Börlin and Grussenmeyer, 2013) based on the Photogrammetric and Computer Vision interpretations of Brown (1971) lens distortion model. In this paper, we applied the technique to investigate how affine distortions can be used to model the projection of a tilt-shift lens. Two extended distortion models were implemented to test the hypothesis that the ordering of the affine and lens distortion steps can be changed to reduce the size of the residuals of a tilt-shift lens calibration. Results on synthetic data confirm that the ordering of the affine and lens distortion steps matter and is detectable by DBAT. However, when applied to a real camera calibration data set of a tilt-shift lens, no difference between the extended models was seen. This suggests that the tested hypothesis is false and that other effects need to be modelled to better explain the projection. The relatively low implementation effort that was needed to generate the models suggest that the technique can be used to investigate other novel projection models in photogrammetry, including modelling changes in the 3D geometry to better understand the tilt-shift lens.

  9. BASACF, Integral Neutron Spectra Adjustment and Dosimetry

    International Nuclear Information System (INIS)

    Tichy, Milos

    1996-01-01

    1 - Description of program or function: Adjustment of a neutron spectrum based on integral detector measurements and calculation of an integral dosimetric quantity (integral flux, d.p.a., dose equivalent) and its variance. The program requires measured data (activities and their covariance matrix) and a priori information (spectrum, dosimetry cross sections, integral quantity conversion factor and their covariance matrices). All a priori covariance matrices can be read in from a file prepared by some other code or can be generated by means of three different methods (by subroutines included in the program). A subroutine which can normalize the a priori flux to measured data is also included. The program provides also adjusted dosimetry cross sections (with covariance matrix) so that it can be used for an adjustment of cross sections (or response functions of e.g. Bonner balls) by measurements in well-known neutron spectra. 2 - Method of solution: Bayesian theorem on conditional probability applied to linearized relation between activities, dosimetry cross sections and flux. All probability distributions are supposed to be normal and this supposition leads to minimizing of the same functional as least squares method (STAY'SL). This task is solved by a covariance filter method which avoids any matrix inversion and is numerically robust and stable. 3 - Restrictions on the complexity of the problem: This version can use 45 energy groups and 5 detectors and occupies 310 kB of main memory. This restriction can be modified according to available memory. The covariance matrix of activities is supposed diagonal. A solution is produced for any set of input data but in the case of non-consistent data, when measured activities do not match the a priori flux, the solution is not very meaningful

  10. Permanent multipole magnets with adjustable strength

    International Nuclear Information System (INIS)

    Halbach, K.

    1983-01-01

    Preceded by a short discussion of the motives for using permanent magnets in accelerators, a new type of permanent magnet for use in accelerators is presented. The basic design and most important properties of a quadrople will be described that uses both steel and permanent magnet material. The field gradient produced by this magnet can be adjusted without changing any other aspect of the field produced by this quadrupole. The generalization of this concept to produce other multipole fields, or combination of multipole fields, will also be presented

  11. An Integrative Psychotherapy of Postpartum Adjustment

    Directory of Open Access Journals (Sweden)

    Carol Merle-Fishman

    2010-12-01

    Full Text Available Becoming a mother is a time of transition, transformation and sometimes trauma. The immediacy of meeting the needs of an infant, combined with the immediacy of becoming a mother, often collide to produce depression, anxiety and stress. Shame, confusion, isolation and cultural expectations often prevent women from seeking the postpartum support they need, which may result in long lasting depression, anxiety and unresolved trauma. Integrative Psychotherapy, Transactional Analysis and Attachment Theory offer ways to understand postpartum adjustment as well as methodologies for addressing this unique developmental event in the life of women.

  12. Tuning permanent magnets with adjustable field clamps

    International Nuclear Information System (INIS)

    Schermer, R.I.

    1987-01-01

    The effective length of a permanent-magnet assembly can be varied by adjusting the geometrical parameters of a field clamp. This paper presents measurements on a representative dipole and quadrupole as the field clamp is withdrawn axially or radially. The detailed behavior depends upon the magnet multipolarity and geometry. As a rule-of-thumb, a 3-mm-thick iron plate placed at one end plane of the magnet will shorten the length by one-third of the magnet bore radius

  13. Permanent multipole magnets with adjustable strength

    International Nuclear Information System (INIS)

    Halbach, K.

    1983-03-01

    Preceded by a short discussion of the motives for using permanent magnets in accelerators, a new type of permanent magnet for use in accelerators is presented. The basic design and most important properties of a quadrupole will be described that uses both steel and permanent magnet material. The field gradient produced by this magnet can be adjusted without changing any other aspect of the field produced by this quadrupole. The generalization of this concept to produce other multipole fields, or combination of multipole fields, will also be presented

  14. Adjustable Speed Drives and Power Quality

    DEFF Research Database (Denmark)

    Davari, Pooya; Yang, Yongheng; Zare, Firuz

    2016-01-01

    This paper provides an overview and proposes cost-effective and efficient opportunities in improving power quality in Adjustable Speed Drive (ASD) systems. In particular, an Electronic Inductor (EI) technique has been used in single drives to overcome the existing challenges in conventional...... frontend rectifiers even at partial loading conditions. Moreover, the effectiveness of the EI technique along with a phase-shifted current control in terms of improved grid current quality in multi-drive configurations is addressed. Furthermore, a novel DC-link current modulation scheme for multi...

  15. Oligopoly games with nonlinear demand and cost functions: Two boundedly rational adjustment processes

    International Nuclear Information System (INIS)

    Naimzada, Ahmad K.; Sbragia, Lucia

    2006-01-01

    We consider a Cournot oligopoly game, where firms produce an homogenous good and the demand and cost functions are nonlinear. These features make the classical best reply solution difficult to be obtained, even if players have full information about their environment. We propose two different kinds of repeated games based on a lower degree of rationality of the firms, on a reduced information set and reduced computational capabilities. The first adjustment mechanism is called 'Local Monopolistic Approximation' (LMA). First firms get the correct local estimate of the demand function and then they use such estimate in a linear approximation of the demand function where the effects of the competitors' outputs are ignored. On the basis of this subjective demand function they solve their profit maximization problem. By using the second adjustment process, that belongs to a class of adaptive mechanisms known in the literature as 'Gradient Dynamics' (GD), firms do not solve any optimization problem, but they adjust their production in the direction indicated by their (correct) estimate of the marginal profit. Both these repeated games may converge to a Cournot-Nash equilibrium, i.e. to the equilibrium of the best reply dynamics. We compare the properties of the two different dynamical systems that describe the time evolution of the oligopoly games under the two adjustment mechanisms, and we analyze the conditions that lead to non-convergence and complex dynamic behaviors. The paper extends the results of other authors that consider similar adjustment processes assuming linear cost functions or linear demand functions

  16. The stress-buffering effects of hope on adjustment to multiple sclerosis.

    Science.gov (United States)

    Madan, Sindia; Pakenham, Kenneth I

    2014-12-01

    Hope is an important resource for coping with chronic illness; however, the role of hope in adjusting to multiple sclerosis (MS) has been neglected, and the mechanisms by which hope exerts beneficial impacts are not well understood. This study aims to examine the direct and stress-moderating effects of dispositional hope and its components (agency and pathways) on adjustment to MS. A total of 296 people with MS completed questionnaires at time 1 at 12 months later and time 2. Focal predictors were stress, hope, agency and pathways, and the adjustment outcomes were anxiety, depression, positive affect, positive states of mind and life satisfaction. Results of regression analyses showed that as predicted, greater hope was associated with better adjustment after controlling for the effects of time 1 adjustment and relevant demographics and illness variables. However, these direct effects of hope were subsumed by stress-buffering effects. Regarding the hope components, the beneficial impacts of agency emerged via a direct effects mechanism, whereas the effects of pathways were evidenced via a moderating mechanism. Findings highlight hope as an important protective coping resource for coping with MS and accentuate the roles of both agency and pathways thinking and their different modes of influence in this process.

  17. Anticipatory synergy adjustments reflect individual performance of feedforward force control.

    Science.gov (United States)

    Togo, Shunta; Imamizu, Hiroshi

    2016-10-06

    We grasp and dexterously manipulate an object through multi-digit synergy. In the framework of the uncontrolled manifold (UCM) hypothesis, multi-digit synergy is defined as the coordinated control mechanism of fingers to stabilize variable important for task success, e.g., total force. Previous studies reported anticipatory synergy adjustments (ASAs) that correspond to a drop of the synergy index before a quick change of the total force. The present study compared ASA's properties with individual performances of feedforward force control to investigate a relationship of those. Subjects performed a total finger force production task that consisted of a phase in which subjects tracked target line with visual information and a phase in which subjects produced total force pulse without visual information. We quantified their multi-digit synergy through UCM analysis and observed significant ASAs before producing total force pulse. The time of the ASA initiation and the magnitude of the drop of the synergy index were significantly correlated with the error of force pulse, but not with the tracking error. Almost all subjects showed a significant increase of the variance that affected the total force. Our study directly showed that ASA reflects the individual performance of feedforward force control independently of target-tracking performance and suggests that the multi-digit synergy was weakened to adjust the multi-digit movements based on a prediction error so as to reduce the future error. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  18. The Mediating Role of Psychological Adjustment between Peer Victimization and Social Adjustment in Adolescence.

    Science.gov (United States)

    Romera, Eva M; Gómez-Ortiz, Olga; Ortega-Ruiz, Rosario

    2016-01-01

    There is extensive scientific evidence of the serious psychological and social effects that peer victimization may have on students, among them internalizing problems such as anxiety or negative self-esteem, difficulties related to low self-efficacy and lower levels of social adjustment. Although a direct relationship has been observed between victimization and these effects, it has not yet been analyzed whether there is a relationship of interdependence between all these measures of psychosocial adjustment. The aim of this study was to examine the relationship between victimization and difficulties related to social adjustment among high school students. To do so, various explanatory models were tested to determine whether psychological adjustment (negative self-esteem, social anxiety and social self-efficacy) could play a mediating role in this relationship, as suggested by other studies on academic adjustment. The sample comprised 2060 Spanish high school students (47.9% girls; mean age = 14.34). The instruments used were the scale of victimization from European Bullying Intervention Project Questionnaire , the negative scale from Rosenberg Self-Esteem Scale, Social Anxiety Scale for Adolescents and a general item about social self-efficacy, all of them self-reports. Structural equation modeling was used to analyze the data. The results confirmed the partial mediating role of negative self-esteem, social anxiety and social self-efficacy between peer victimization and social adjustment and highlight the importance of empowering victimized students to improve their self-esteem and self-efficacy and prevent social anxiety. Such problems lead to the avoidance of social interactions and social reinforcement, thus making it difficult for these students to achieve adequate social adjustment.

  19. The Mediating Role of Psychological Adjustment between Peer Victimization and Social Adjustment in Adolescence

    Directory of Open Access Journals (Sweden)

    Eva M. Romera

    2016-11-01

    Full Text Available There is extensive scientific evidence of the serious psychological and social effects that peer victimization may have on students, among them internalizing problems such as anxiety or negative self-esteem, difficulties related to low self-efficacy and lower levels of social adjustment. Although a direct relationship has been observed between victimization and these effects, it has not yet been analyzed whether there is a relationship of interdependence between all these measures of psychosocial adjustment. The aim of this study was to examine the relationship between victimization and difficulties related to social adjustment among high school students. To do so, various explanatory models were tested to determine whether psychological adjustment (negative self-esteem, social anxiety and social self-efficacy could play a mediating role in this relationship, as suggested by other studies on academic adjustment. The sample comprised 2060 Spanish high school students (47.9% girls; mean age = 14.34. The instruments used were the scale of victimization from European Bullying Intervention Project Questionnaire, the negative scale from Rosenberg Self-Esteem Scale, Social Anxiety Scale for Adolescents and a general item about social self-efficacy, all of them self-reports. Structural equation modeling was used to analyze the data. The results confirmed the partial mediating role of negative self-esteem, social anxiety and social self-efficacy between peer victimization and social adjustment and highlight the importance of empowering victimized students to improve their self-esteem and self-efficacy and prevent social anxiety. Such problems lead to the avoidance of social interactions and social reinforcement, thus making it difficult for these students to achieve adequate social adjustment.

  20. Mesoporous Akaganeite of Adjustable Pore Size Synthesized using Mixed Templates

    Science.gov (United States)

    Zhang, Y.; Ge, D. L.; Ren, H. P.; Fan, Y. J.; Wu, L. M.; Sun, Z. X.

    2017-12-01

    Mesoporous akaganeite with large and adjustable pore size was synthesized through a co-template method, which was achieved by the combined interaction between PEG2000 and alkyl amines with different lengths of the straight carbon chain. The characterized results indicate that the synthesized samples show comparatively narrow BJH pore size distributions and centered at 14.3 nm when PEG and HEPA was used, and it could be enlarged to 16.8 and 19.4 nm respectively through changing the alkyl amines to DDA and HDA. Meanwhile, all the synthesized akaganeite possess relativity high specific surface area ranging from 183 to 281 m2/g and high total pore volume of 0.98 to 1.5 cm3/g. A possible mechanism leading to the pore size changing was also proposed.

  1. Adjustment of legally binding local plans

    DEFF Research Database (Denmark)

    Hvingel, Line Træholt; Aunsborg, Christian; Christensen, Finn Kjær

    2012-01-01

    Traditionally, and by law, new urban areas in Denmark are regulated and planned through legally binding local plans. Recently a tendency has occurred: The municipalities make the legally binding local plans quite open for future adjustment, and they are using a substantial amount of ‘empowerment ...... the considerations of legal rights, the extend of the legal use of empowerment provisions and the combination of the use of legal binding local plans and other legal instruments such as easements and sales agreements.......Traditionally, and by law, new urban areas in Denmark are regulated and planned through legally binding local plans. Recently a tendency has occurred: The municipalities make the legally binding local plans quite open for future adjustment, and they are using a substantial amount of ‘empowerment...... provisions’ which empower the municipalities to later ruling. This way of making plans postpones the actual regulation of an area (i.e. the planning permission) making it an individual ruling for instance at the application of building permits. Case studies show examples of this way of regulating an area...

  2. Adjustable electronic load-alarm relay

    International Nuclear Information System (INIS)

    Mason, C.H.; Sitton, R.S.

    1976-01-01

    An improved electronic alarm relay for monitoring the current drawn by an ac motor or other electrical load is described. The circuit is designed to measure the load with high accuracy and to have excellent alarm repeatability. Chattering and arcing of the relay contacts are minimal. The operator can adjust the set point easily and can re-set both the high and the low alarm points by means of one simple adjustment. The relay includes means for generating a signal voltage proportional to the motor current. In a preferred form of the invention a first operational amplifier is provided to generate a first constant reference voltage which is higher than a preselected value of the signal voltage. A second operational amplifier is provided to generate a second constant reference voltage which is lower than the aforementioned preselected value of the signal voltage. A circuit comprising a first resistor serially connected to a second resistor is connected across the outputs of the first and second amplifiers, and the junction of the two resistors is connected to the inverting terminal of the second amplifier. Means are provided to compare the aforementioned signal voltage with both the first and second reference voltages and to actuate an alarm if the signal voltage is higher than the first reference voltage or lower than the second reference voltage

  3. Novel fluorescence adjustable photonic crystal materials

    Science.gov (United States)

    Zhu, Cheng; Liu, Xiaoxia; Ni, Yaru; Fang, Jiaojiao; Fang, Liang; Lu, Chunhua; Xu, Zhongzi

    2017-11-01

    Novel photonic crystal materials (PCMs) with adjustable fluorescence were fabricated by distributing organic fluorescent powders of Yb0.2Er0.4Tm0.4(TTA)3Phen into the opal structures of self-assembled silica photonic crystals (PCs). Via removing the silica solution in a constant speed, PCs with controllable thicknesses and different periodic sizes were obtained on glass slides. Yb0.2Er0.4Tm0.4(TTA)3Phen powders were subsequently distributed into the opal structures. The structures and optical properties of the prepared PCMs were investigated. Finite-difference-time-domain (FDTD) calculation was used to further analyze the electric field distributions in PCs with different periodic sizes while the relation between periodic sizes and fluorescent spectra of PCMs was discussed. The results showed that the emission color of the PCMs under irradiation of 980 nm laser can be easily adjusted from green to blue by increasing the periodic size from 250 to 450 nm.

  4. Lack of adjustment latitude at work as a trigger of taking sick leave-a Swedish case-crossover study.

    Directory of Open Access Journals (Sweden)

    Hanna Hultin

    Full Text Available OBJECTIVES: Research has shown that individuals reporting a low level of adjustment latitude, defined as having few possibilities to temporarily adjust work demands to illness, have a higher risk of sick leave. To what extent lack of adjustment latitude influences the individual when making the decision to take sick leave is unknown. We hypothesize that ill individuals are more likely to take sick leave on days when they experience a lack of adjustment latitude at work than on days with access to adjustment latitude. METHODS: A case-crossover design was applied to 546 sick-leave spells, extracted from a cohort of 1 430 employees at six Swedish workplaces, with a 3-12 month follow-up of all new sick-leave spells. Exposure to lack of adjustment latitude on the first sick-leave day was compared with exposure during several types of control periods sampled from the previous two months for the same individual. RESULTS: Only 35% of the respondents reported variations in access to adjustment latitude, and 19% reported a constant lack of adjustment latitude during the two weeks prior to the sick-leave spell. Among those that did report variation, the risk of sick leave was lower on days with lack of adjustment latitude, than on days with access (Odds Ratio 0.36, 95% Confidence Interval 0.25-0.52. CONCLUSIONS: This is the first study to show the influence of adjustment latitude on the decision to take sick leave. Among those with variations in exposure, lack of adjustment latitude was a deterrent of sick leave, which is contrary to the à priori hypothesis. These results indicate that adjustment latitude may not only capture long-lasting effects of a flexible working environment, but also temporary possibilities to adjust work to being absent. Further studies are needed to disentangle the causal mechanisms of adjustment latitude on sick-leave.

  5. Fracture Mechanics

    International Nuclear Information System (INIS)

    Jang, Dong Il; Jeong, Gyeong Seop; Han, Min Gu

    1992-08-01

    This book introduces basic theory and analytical solution of fracture mechanics, linear fracture mechanics, non-linear fracture mechanics, dynamic fracture mechanics, environmental fracture and fatigue fracture, application on design fracture mechanics, application on analysis of structural safety, engineering approach method on fracture mechanics, stochastic fracture mechanics, numerical analysis code and fracture toughness test and fracture toughness data. It gives descriptions of fracture mechanics to theory and analysis from application of engineering.

  6. Children's Representations of Family Relationships, Peer Information Processing, and School Adjustment

    Science.gov (United States)

    Bascoe, Sonnette M.; Davies, Patrick T.; Sturge-Apple, Melissa L.; Cummings, E. Mark

    2009-01-01

    This study examined children's peer information processing as an explanatory mechanism underlying the association between their insecure representations of interparental and parent-child relationships and school adjustment in a sample of 210 first graders. Consistent with emotional security theory (P. T. Davies & E. M. Cummings, 1994), results…

  7. Fat or lean: adjustment of endogenous energy stores to predictable and unpredictable changes in allostatic load

    Science.gov (United States)

    Schultner, Jannik; Kitaysky, Alexander S.; Welcker, Jorg; Hatch, Scott

    2013-01-01

    1. The ability to store energy endogenously is an important ecological mechanism that allows animals to buffer predictable and unpredictable variation in allostatic load. The secretion of glucocorticoids, which reflects changes in allostatic load, is suggested to play a major role in the adjustment of endogenous stores to these varying conditions.

  8. Weight Loss After Laparoscopic Adjustable Gastric Banding is not Caused by Altered Gastric Emptying

    NARCIS (Netherlands)

    de Jong, J. R.; van Ramshorst, B.; Gooszen, H. G.; Smout, A. J. P. M.; Buul, M. M. C. Tiel-Van

    In order to know the role of gastric emptying in the mechanism of weight loss and early satiety after a restrictive surgical procedure for treatment of morbid obesity, a consecutive series of patients were scintigraphically investigated before and after laparoscopic adjustable gastric banding.

  9. No evidence for selective follicle abortion underlying primary sex ratio adjustment in pigeons

    NARCIS (Netherlands)

    Goerlich, Vivian C.; Dijkstra, Cornelis; Groothuis, Antonius

    Primary sex ratio adjustment in birds has been extensively studied, yet the underlying physiological mechanisms are far from understood. Avian females are the heterogametic sex (ZW), and the future sex of the offspring is determined at chromosome segregation during meiosis I, shortly before the

  10. Weight loss after laparoscopic adjustable gastric banding is not caused by altered gastric emptying

    NARCIS (Netherlands)

    de Jong, J. R.; van Ramshorst, B.; Gooszen, H. G.; Smout, A. J. P. M.; Tiel-van Buul, M. M. C.

    2009-01-01

    BACKGROUND: In order to know the role of gastric emptying in the mechanism of weight loss and early satiety after a restrictive surgical procedure for treatment of morbid obesity, a consecutive series of patients were scintigraphically investigated before and after laparoscopic adjustable gastric

  11. Seat Adjustment Design of an Intelligent Robotic Wheelchair Based on the Stewart Platform

    Directory of Open Access Journals (Sweden)

    Po Er Hsu

    2013-03-01

    Full Text Available A wheelchair user makes direct contact with the wheelchair seat, which serves as the interface between the user and the wheelchair, for much of any given day. Seat adjustment design is of crucial importance in providing proper seating posture and comfort. This paper presents a multiple-DOF (degrees of freedom seat adjustment mechanism, which is intended to increase the independence of the wheelchair user while maintaining a concise structure, light weight, and intuitive control interface. This four-axis Stewart platform is capable of heaving, pitching, and swaying to provide seat elevation, tilt-in-space, and sideways movement functions. The geometry and types of joints of this mechanism are carefully arranged so that only one actuator needs to be controlled, enabling the wheelchair user to adjust the seat by simply pressing a button. The seat is also equipped with soft pressure-sensing pads to provide pressure management by adjusting the seat mechanism once continuous and concentrated pressure is detected. Finally, by comparing with the manual wheelchair, the proposed mechanism demonstrated the easier and more convenient operation with less effort for transfer assistance.

  12. Structural adjustment and drought in Zambia.

    Science.gov (United States)

    Mulwanda, M

    1995-06-01

    While drought is not uncommon in Zambia, the country is now facing the worst drought in history. The monetary and social costs will be enormous. Although it is too early to measure the economic and social costs of the drought on Zambia, it is obvious that the impact is catastrophic on a country whose economy is under pressure. The drought will affect the structural adjustment programme (SAP) unveiled by the new government which has embraced the market economy. The country has imported, and will continue to import, large quantities of maize and other foodstuffs, a situation likely to strain the balance of payments. Earlier targets with regard to export earnings, reductions in the budget deficit, and GDP growth as contained in the Policy Framework Paper (PFP) are no longer attainable due to the effects of the drought.

  13. Do Daily Retail Gasoline Prices adjust Asymmetrically?

    Energy Technology Data Exchange (ETDEWEB)

    Bettendorf, L. [Tinbergen Instituut, Amsterdam/Rotterdam (Netherlands); Van der Geest, S. [Erasmus Universiteit, Rotterdam (Netherlands); Kuper, G. [University of Groningen, Groningen (Netherlands)

    2005-04-15

    This paper analyzes adjustments in the Dutch retail gasoline prices. We estimate an error correction model on changes in the daily retail price for gasoline (taxes excluded) for the period 1996-2004 taking care of volatility clustering by estimating an EGARCH model. It turns out the volatility process is asymmetrical: an unexpected increase in the producer price has a larger effect on the variance of the producer price than an unexpected decrease. We do not find strong evidence for amount asymmetry. However, there is a faster reaction to upward changes in spot prices than to downward changes in spot prices. This implies timing or pattern asymmetry. This asymmetry starts three days after the change in the spot price and lasts for four days.

  14. Adjusting the IP $\\beta$ Functions in RHIC

    CERN Document Server

    Wittmer, W; Pilat, F; Ptitsyn, V; Van Zeijts, J

    2004-01-01

    The beta functions at the IP can be adjusted without perturbation of other optics functions via several approaches. In this paper we describe a scheme based on a vector knob, which assigns fixed values to the different tuning quadrupoles and scales them by a common multiplier. The values for the knob vector were calculated for a lattice without any errors using MADX. Previous studies for the LHC [1] have shown that this approach can meet the design goals. A specific feature of the RHIC lattice is the nested power supply system. To cope with the resulting problems a detailed response matrix analysis has been carried out and different sets of knobs were calculated and compared. The knobs were tested at RHIC during the 2004 run and preliminary results are discussed. Simultaneously a new approach to measure the beam sizes of both colliding beams at the IP, based on the tunability provided by the knobs, was developed and tested.

  15. Laparoscopic Adjustable Gastric Banding and Hypoglycemia

    Directory of Open Access Journals (Sweden)

    Sigrid Bairdain

    2013-01-01

    Full Text Available Obesity is commonplace, and surgical treatment usually includes Roux-en-Y gastric bypasses (RYGBs. RYGBs have the most documented side effects including vitamin deficiencies, rebound weight gain, and symptomatic hypoglycemia; fewer series exist describing hypoglycemia following other bariatric operations. We reviewed all patients undergoing laparoscopic adjustable gastric banding (LAGB at our institution between 2008 and 2012. Three patients were identified to have symptomatic hypoglycemia following LAGB. Mean time from surgery was 33 months (range 14–45 months, and mean weight loss was 32.7 kg (range 15.9–43.1 kg. None of the patients had preexisting diabetes. Therefore, symptomatic hypoglycemia should be investigated irrespective of bariatric operation.

  16. Adjustable speed drive study, part 1

    Science.gov (United States)

    Wallace, A.

    1989-08-01

    Advances in speed control for motors in recent years, notably those in power electronics, have widened the range of application for several adjustable speed drive (ASD) types to include the smaller horsepower sizes. The dc motor drive, formerly in almost universal use for speed control, is being challenged by the high efficiency induction motor/pulse width modulation (PWM) drive; and for special small horsepower size applications, by the permanent magnet motor/PWM inverter drive or by the switched reluctance motor drive. The main characteristics of the several ASD types suitable for small horsepower size applications are discussed, as well as their unwanted side effects: poor power factor, harmonic distortion of the supply, acoustic noise, and electromagnetic interference. A procedure is recommended for determining which, if any, ASD to use.

  17. First adjustments in the solar industry

    International Nuclear Information System (INIS)

    Deye, M.

    2009-01-01

    The European environmental policy goal is to generate 23% of the end-use power consumption from renewable energy sources by 2020. The solar photovoltaic market has shown an exponential growth since 1998 with a record rise of installed capacities in 2008 (+61%). In 2009, the growth should reach 30% only. The solar industry has to face the conjugated effects of the demand decay and of the credit crisis which has led to over-capacities and prices drop. The crisis has hit the solar cell manufacturers but for some of them, it is an opportunity to make some strategic adjustments and to develop products with a higher added value. The market and the demand are still there but the clients encounter more difficulties to obtain the credits for their projects. (J.S.)

  18. Adjustment of gripping force by optical systems

    Science.gov (United States)

    Jalba, C. K.; Barz, C.

    2018-01-01

    With increasing automation, robotics also requires ever more intelligent solutions in the handling of various tasks. In this context, many grippers must also be re-designed. For this, they must always be adapted for different requirements. The equipment of the gripper systems with sensors should help to make the gripping process more intelligent. In order to achieve such objectives, optical systems can also be used. This work analyzes how the gripping force can be adjusted by means of an optical recognition. The result of this work is the creation of a connection between optical recognition, tolerances, gripping force and real-time control. In this way, algorithms can be created, with the aid of which robot grippers as well as other gripping systems become more intelligent.

  19. Can structural adjustment work for women farmers.

    Science.gov (United States)

    Mehra, R

    1991-12-01

    This article discusses the impact of structural adjustment programs (SAPs) on women farmers in developing countries. SAPs aim to improve economic efficiency and promote more rapid economic growth. SAPs are introduced in two phases. The first phase involves short-term loans with the condition that the country adopt monetary restraints and currency devaluation measures. In the second phase, long-term loans are given with the provision that the country deregulate their economy and open up markets. The agricultural sector is affected by SAPs because of their importance in employment, income generation, and export earnings. SAPs result in lower farm commodity prices due to currency devaluations and in removal of subsidies, which results in market-sensitive pricing or higher food prices. The impact of SAPs on agriculture vary between countries. In Morocco and Algeria, agriculture expanded under SAPs. In Indonesia, Bolivia, Costa Rica, and Mexico, the agriculture stagnated or declined. Agricultural growth was slowest in Africa. SAPs were somewhat successful in increasing agricultural exports. Food production grew slowly in many adjusting countries. Blame for failures of SAPs has been placed on government failure to implement reforms properly and overly optimistic assumptions about the timing of productive gains. Little attention has focused on the constraints facing women farmers, who are a large proportion of farmers, particularly in sub-Saharan Africa. This article focuses on the issues of limited access to resources, credit, agricultural extension and information, land ownership, education, and time as constraints to women farmers. Women also must ensure household food security. For SAPs to work effectively, complementary policies must be implemented that reallocate available productive resources and new technologies to women and that deal with women's constraints.

  20. Struggles over patriarchal structural adjustment in Tanzania.

    Science.gov (United States)

    Mbilinyi, M

    1993-10-01

    Within the space of 7 years (1986-93), structural adjustment policies have contributed to a reversal of the gains in economic development achieved in Tanzania in the 1960s and 1970s. Structural adjustment policies have helped large-scale producers and ordinary citizens but have led to a decline in social services which is reflected in drops in primary school enrollment and increases in medical costs. Government revenues are absorbed by foreign debt servicing. The reduction of support for social services has increased women's work; bolstered gender division of labor; and reduced women's access to education, formal employment, and health services. On the other hand, increased participation in market-oriented activities has increased women's mobility and exposure to modern ideas. This has led to changing gender relations which on the positive side can lead to shared decision-making but on the negative side may cause men to abdicate their familial responsibilities. Women suffer, however, from a lack of investment in ways to lighten their household responsibilities and have lost their ability to control food production because of the shift to cash crop production for export. The combination of hard work, low income, and stress has taken a toll on women's health, and both the maternal mortality rate and incidence of HIV infections among teenage girls has increased. In response to this situation, Tanzanian women have formed the Tanzania Gender Networking Programme (TGNP) which seeks to empower women and transform society through such activities as education and training, research, and lobbying and networking. Workshops sponsored by the TGNP have resulted in recommendations for adoption of a people-centered development strategy.

  1. Adjustment to Life with Lung Cancer.

    Science.gov (United States)

    Czerw, Aleksandra I; Religioni, Urszula; Deptała, Andrzej

    2016-01-01

    In Poland, lung cancer is the most common type of cancer in males (20% of all cases) and third most common type of cancer in females (9% of all cases), right behind breast and colorectal cancers. Recently, 28,000 new cases of lung cancer per year were reported in both genders. The objective of the study was to asses coping strategies, pain management, acceptance of illness and adjustment to cancer in patients diagnosed with pulmonary carcinoma and the effect of socioeconomic variables on the abovementioned issues. The study included 243 patients diagnosed with lung cancer during outpatient chemotherapy (classical chemotherapy and molecularly targeted therapies) at the Center of Oncology, Maria Skłodowska-Curie Institute in Warszawa. We applied the Paper and Pencil Interview (PAPI) technique. The questionnaire interview was composed of demographic questions and the following four psychometric tests: BPCQ measuring the influence of factors affecting pain management in patients, CSQ designed to evaluate pain coping strategies, AIS questionnaire, measuring disease acceptance, and the mini-Mac scale, assessing psychological adjustment to disease. The highest mean score recorded in the BPCQ was recorded in the powerful doctors subscale (16.79) and the lowest in the internal factors section (15.64). Education, professional status and income were the variables which differentiated the scores. We recorded the top average score in CSQ in the coping self statements subscale (mean = 19.64), and the lowest score in the reinterpreting pain sensations subscale (mean score = 10.32). The results of the test were differentiated by education and income. Patients had the highest Mini-MAC scale scores in the fighting spirit section (21.91). In the case of patients affected with lung cancer, education and professional status affect the way patients treat doctors in the disease process. These variables are also critical in patients' approach to disease and methods of coping with it.

  2. Adjustment of Weed Hoeing to Narrowly Spaced Cereals

    Directory of Open Access Journals (Sweden)

    Jannis Machleb

    2018-04-01

    Full Text Available Weed hoeing can be successfully performed in wide row crops, such as sugar beet, maize, soybean and wide spaced cereals. However, little experience is available for hoeing in narrow cereal row spaces below 200 mm. Yet, mechanical weed control can pose an alternative to herbicide applications by reducing the herbicide resistant populations present in the field. In this experiment, it was investigated whether hoeing is feasible in cereals with 150 and 125 mm row spacings. The trial was set up at two locations (Ihinger Hof and Kleinhohenheim in southwest Germany. Three different conventional hoeing sweeps, a goosefoot sweep, a no-till sweep and a down-cut side knife were adjusted to the small row widths, and hoeing was performed once with a tractor and a standard hoeing frame which was guided by a second human operator. The average grain yield, crop and weed biomass, and weed control efficacy of each treatment were recorded. The goosefoot and no-till sweep were tested at driving speeds of 4 and 6 km·h−1. The down-cut side knife was applied at 4 km·h−1. The results indicate that hoeing caused no yield decrease in comparison to a conventional herbicide application or manual weeding. The highest yield with a mechanical treatment was recorded for the no-till sweeps at both trial locations. Hoeing was performed successfully in narrowly spaced cereals of 150 and 125 mm, and the weed control efficacy of the mechanical treatments ranged from 50.9% at Kleinhohenheim to 89.1% at Ihinger Hof. Future experiments are going to focus on more distinct driving speeds ranging from 2 to 10 km·h−1 and performing more than one pass with the hoe. Additionally, combining the mechanical weeding tools with a camera-steered hoeing frame could increase accuracy, allow for higher working speeds and substitute the second human operator guiding the hoe.

  3. 75 FR 33379 - Railroad Cost Recovery Procedures-Productivity Adjustment; Quarterly Rail Cost Adjustment Factor

    Science.gov (United States)

    2010-06-11

    ... information is contained in the Board's June 14, 2010 decision, which is available on our website at http://www.stb.dot.gov . Copies of the decision may be purchased by contacting the office of Public... Cost Adjustment Factor AGENCY: Surface Transportation Board. [[Page 33380

  4. Emotional closeness to parents and grandparents: A moderated mediation model predicting adolescent adjustment.

    Science.gov (United States)

    Attar-Schwartz, Shalhevet

    2015-09-01

    Warm and emotionally close relationships with parents and grandparents have been found in previous studies to be linked with better adolescent adjustment. The present study, informed by Family Systems Theory and Intergenerational Solidarity Theory, uses a moderated mediation model analyzing the contribution of the dynamics of these intergenerational relationships to adolescent adjustment. Specifically, it examines the mediating role of emotional closeness to the closest grandparent in the relationship between emotional closeness to a parent (the offspring of the closest grandparent) and adolescent adjustment difficulties. The model also examines the moderating role of emotional closeness to parents in the relationship between emotional closeness to grandparents and adjustment difficulties. The study was based on a sample of 1,405 Jewish Israeli secondary school students (ages 12-18) who completed a structured questionnaire. It was found that emotional closeness to the closest grandparent was more strongly associated with reduced adjustment difficulties among adolescents with higher levels of emotional closeness to their parents. In addition, adolescent adjustment and emotional closeness to parents was partially mediated by emotional closeness to grandparents. Examining the family conditions under which adolescents' relationships with grandparents is stronger and more beneficial for them can help elucidate variations in grandparent-grandchild ties and expand our understanding of the mechanisms that shape child outcomes. (c) 2015 APA, all rights reserved).

  5. 19 CFR 351.413 - Disregarding insignificant adjustments.

    Science.gov (United States)

    2010-04-01

    ... COUNTERVAILING DUTIES Calculation of Export Price, Constructed Export Price, Fair Value, and Normal Value § 351..., constructed export price, or normal value, as the case may be. Groups of adjustments are adjustments for...

  6. Primal and dual approaches to adjustable robust optimization

    NARCIS (Netherlands)

    de Ruiter, Frans

    2018-01-01

    Robust optimization has become an important paradigm to deal with optimization under uncertainty. Adjustable robust optimization is an extension that deals with multistage problems. This thesis starts with a short but comprehensive introduction to adjustable robust optimization. Then the two

  7. Growth Control by Ethylene: Adjusting Phenotypes to the Environment

    NARCIS (Netherlands)

    Pierik, R.; Sasidharan, R.; Voesenek, L.A.C.J.

    2007-01-01

    Plants phenotypically adjust to environmental challenges, and the gaseous plant hormone ethylene modulates many of these growth adjustments. Ethylene can be involved in environmentally induced growth inhibition as well as growth stimulation. Still, ethylene has long been considered a growth

  8. 75 FR 23227 - Trade Adjustment Assistance for Farmers

    Science.gov (United States)

    2010-05-03

    ... DEPARTMENT OF AGRICULTURE Foreign Agricultural Service Trade Adjustment Assistance for Farmers AGENCY: Foreign Agricultural Service, USDA. ACTION: Notice. The Administrator, Foreign Agricultural... be obtained at the Web site for the Trade Adjustment Assistance for Farmers program. The URL is http...

  9. 77 FR 17121 - Quarterly Rail Cost Adjustment Factor

    Science.gov (United States)

    2012-03-23

    ... decision may be purchased by contacting the Office of Public Assistance, Governmental Affairs, and...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board, Department of Transportation. ACTION: Approval of rail cost adjustment factor. [[Page 17122

  10. Parental Divorce during Adolescence and Adjustment in Early Adulthood.

    Science.gov (United States)

    Richardson, Stacey; McCabe, Marita P.

    2001-01-01

    Examined the impact of parental divorce during adolescence, interparental conflict, and intimacy with parents on young adult adjustment. High levels of interparental conflict were found to be negatively associated with adjustment and current intimacy of parents. (Author)

  11. A properly adjusted forage harvester can save time and money

    Science.gov (United States)

    A properly adjusted forage harvester can save fuel and increase the realizable milk per ton of your silage. This article details the adjustments necessary to minimize energy while maximizing productivity and forage quality....

  12. Puzzling Mechanisms

    Science.gov (United States)

    van Deventer, M. Oskar

    2009-01-01

    The basis of a good mechanical puzzle is often a puzzling mechanism. This article will introduce some new puzzling mechanisms, like two knots that engage like gears, a chain whose links can be interchanged, and flat gears that do not come apart. It illustrates how puzzling mechanisms can be transformed into real mechanical puzzles, e.g., by…

  13. 42 CFR 413.231 - Adjustment for wages.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 2 2010-10-01 2010-10-01 false Adjustment for wages. 413.231 Section 413.231... Disease (ESRD) Services and Organ Procurement Costs § 413.231 Adjustment for wages. (a) CMS adjusts the labor-related portion of the base rate to account for geographic differences in the area wage levels...

  14. 8 CFR 1209.1 - Adjustment of status of refugees.

    Science.gov (United States)

    2010-01-01

    ... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Adjustment of status of refugees. 1209.1... IMMIGRATION REGULATIONS ADJUSTMENT OF STATUS OF REFUGEES AND ALIENS GRANTED ASYLUM § 1209.1 Adjustment of status of refugees. The provisions of this section shall provide the sole and exclusive procedure for...

  15. 8 CFR 209.1 - Adjustment of status of refugees.

    Science.gov (United States)

    2010-01-01

    ... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Adjustment of status of refugees. 209.1... STATUS OF REFUGEES AND ALIENS GRANTED ASYLUM § 209.1 Adjustment of status of refugees. The provisions of this section shall provide the sole and exclusive procedure for adjustment of status by a refugee...

  16. Language Ability and Adjustment: Western Expatriates in China

    DEFF Research Database (Denmark)

    Selmer, Jan

    2006-01-01

    was directed to Western business expatriates assigned to China. Controlling for the time expatriates had spent in China, results showed that their language ability had a positive association with their sociocultural adjustment. Not surprisingly, this positive relationship was strongest for interaction...... adjustment and weakest for work adjustment. The straightforward implications of these clear findings are discussed in detail....

  17. 77 FR 58910 - Quarterly Rail Cost Adjustment Factor

    Science.gov (United States)

    2012-09-24

    ..., http://www.stb.dot.gov . Copies of the decision may be purchased by contacting the Office of Public...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the fourth quarter 2012 rail cost adjustment factor (RCAF...

  18. 76 FR 37191 - Quarterly Rail Cost Adjustment Factor

    Science.gov (United States)

    2011-06-24

    ... our Web site, http://www.stb.dot.gov . Copies of the decision may be purchased by contacting the...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board, DOT. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the third quarter 2011 Rail Cost Adjustment...

  19. 75 FR 80895 - Quarterly Rail Cost Adjustment Factor

    Science.gov (United States)

    2010-12-23

    ..., http://www.stb.dot.gov . Copies of the decision may be purchased by contacting the Office of Public...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board, DOT. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the first quarter 2011 Rail Cost Adjustment...

  20. 77 FR 37958 - Quarterly Rail Cost Adjustment Factor

    Science.gov (United States)

    2012-06-25

    ..., http://www.stb.dot.gov . Copies of the decision may be purchased by contacting the Office of Public...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board, DOT. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the third quarter 2012 rail cost adjustment...

  1. 78 FR 37660 - Quarterly Rail Cost Adjustment Factor

    Science.gov (United States)

    2013-06-21

    ..., http://www.stb.dot.gov . Copies of the decision may be purchased by contacting the Office of Public...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board, DOT. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board approves the third quarter 2013 Rail Cost Adjustment Factor...

  2. 78 FR 17764 - Quarterly Rail Cost Adjustment Factor

    Science.gov (United States)

    2013-03-22

    ..., http://www.stb.dot.gov . Copies of the decision may be purchased by contacting the Office of Public...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board, DOT. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the second quarter 2013 Rail Cost Adjustment...

  3. 76 FR 59483 - Quarterly Rail Cost Adjustment Factor

    Science.gov (United States)

    2011-09-26

    ... the decision may be purchased by contacting the Office of Public Assistance, Governmental Affairs, and...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board, DOT. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the fourth quarter 2011 Rail Cost Adjustment...

  4. 76 FR 16037 - Quarterly Rail Cost Adjustment Factor

    Science.gov (United States)

    2011-03-22

    ..., http://www.stb.dot.gov . Copies of the decision may be purchased by contacting the Office of Public...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board, DOT. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the second quarter 2011 Rail Cost Adjustment...

  5. 75 FR 58019 - Quarterly Rail Cost Adjustment Factor

    Science.gov (United States)

    2010-09-23

    ..., http://www.stb.dot.gov . Copies of the decision may be purchased by contacting the office of Public...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board, DOT. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the fourth quarter 2010 Rail Cost Adjustment...

  6. 75 FR 16575 - Railroad Cost Recovery Procedures-Productivity Adjustment

    Science.gov (United States)

    2010-04-01

    ...)] Railroad Cost Recovery Procedures--Productivity Adjustment AGENCY: Surface Transportation Board. ACTION: Adoption of a railroad cost recovery procedures productivity adjustment. SUMMARY: By decision served on February 1, 2010, the Board proposed to adopt 1.010 (1.0% per year) as the 2008 productivity adjustment, as...

  7. 42 CFR 422.310 - Risk adjustment data.

    Science.gov (United States)

    2010-10-01

    ... that are used in the development and application of a risk adjustment payment model. (b) Data... (CONTINUED) MEDICARE PROGRAM MEDICARE ADVANTAGE PROGRAM Payments to Medicare Advantage Organizations § 422... risk adjustment factors used to adjust payments, as required under §§ 422.304(a) and (c). CMS also may...

  8. 77 FR 65100 - Adjustment of Civil Monetary Penalties for Inflation

    Science.gov (United States)

    2012-10-25

    ... Penalties for Inflation AGENCY: Commodity Futures Trading Commission ACTION: Final rule. SUMMARY: The... civil monetary penalties, to adjust for inflation. This rule sets forth the maximum, inflation-adjusted... Federal Civil Penalties Inflation Adjustment Act of 1990, as amended by the Debt Collection Improvement...

  9. 46 CFR 506.3 - Civil monetary penalty inflation adjustment.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 9 2010-10-01 2010-10-01 false Civil monetary penalty inflation adjustment. 506.3... PENALTY INFLATION ADJUSTMENT § 506.3 Civil monetary penalty inflation adjustment. The Commission shall... each civil monetary penalty provided by law within the jurisdiction of the Commission by the inflation...

  10. 76 FR 74720 - Inflation Adjustment of Civil Monetary Penalties; Correction

    Science.gov (United States)

    2011-12-01

    ... FEDERAL MARITIME COMMISSION 46 CFR Part 506 [Docket No. 09-04] RIN 3072-AC36 Inflation Adjustment... published in the Federal Register of Friday, July 31, 2009 (74 FR 38114). The rule adjusts for inflation the... accordance with the requirements of the Federal Civil Penalties Inflation Adjustment Act of 1990, as amended...

  11. 78 FR 5760 - Civil Monetary Penalty Inflation Adjustment

    Science.gov (United States)

    2013-01-28

    ... Civil Monetary Penalty Inflation Adjustment AGENCY: U.S. Army Corps of Engineers, DoD. ACTION: Proposed... account for inflation. The adjustment of civil penalties to account for inflation is required by the Federal Civil Penalties Inflation Adjustment Act of 1990, as amended. Since we have not made any...

  12. 32 CFR 269.3 - Civil monetary penalty inflation adjustment.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 2 2010-07-01 2010-07-01 false Civil monetary penalty inflation adjustment. 269... DEFENSE (CONTINUED) MISCELLANEOUS CIVIL MONETARY PENALTY INFLATION ADJUSTMENT § 269.3 Civil monetary penalty inflation adjustment. The Department shall, not later than 180 days after the enactment of the...

  13. 10 CFR 765.12 - Inflation index adjustment procedures.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Inflation index adjustment procedures. 765.12 Section 765... THORIUM PROCESSING SITES Reimbursement Criteria § 765.12 Inflation index adjustment procedures. (a) The... § 765.2(i) of this rule) shall be adjusted for inflation as provided by this section. (b) To make...

  14. 78 FR 56868 - Adjustment of Indemnification for Inflation

    Science.gov (United States)

    2013-09-16

    ... DEPARTMENT OF ENERGY Adjustment of Indemnification for Inflation AGENCY: Office of General Counsel...-Anderson Act. Subsection 170t. of the AEA requires an inflation adjustment of the indemnification amount at... inflation-adjusted amount based on the aggregate percentage change in the CPI during the 5-year period from...

  15. 5 CFR 847.705 - Cost-of-living adjustments.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Cost-of-living adjustments. 847.705... FUND INSTRUMENTALITIES Computation of Benefits Under the Retroactive Provisions § 847.705 Cost-of-living adjustments. Cost-of-living adjustments are applied to the rate payable to the retiree or survivor...

  16. 5 CFR 838.735 - Cost-of-living adjustments.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Cost-of-living adjustments. 838.735... Awarding Former Spouse Survivor Annuities Payment Procedures § 838.735 Cost-of-living adjustments. (a) OPM applies cost-of-living adjustments to all former spouse survivor annuities in pay status at the time of...

  17. 42 CFR 412.320 - Disproportionate share adjustment factor.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 2 2010-10-01 2010-10-01 false Disproportionate share adjustment factor. 412.320... Capital-Related Costs § 412.320 Disproportionate share adjustment factor. (a) Criteria for classification... adjustment factor. (1) If a hospital meets the criteria in paragraph (a)(1) of this section for a...

  18. 76 FR 80448 - Quarterly Rail Cost Adjustment Factor

    Science.gov (United States)

    2011-12-23

    ... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. EP 290 (Sub-No. 5) (2012-1)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the first quarter 2012 rail cost adjustment factor (RCAF...

  19. 42 CFR 412.352 - Budget neutrality adjustment.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 2 2010-10-01 2010-10-01 false Budget neutrality adjustment. 412.352 Section 412.352 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES... § 412.352 Budget neutrality adjustment. For FY 1992 through FY 1995, CMS will determine an adjustment to...

  20. 7 CFR 981.401 - Adjusted kernel weight.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Adjusted kernel weight. 981.401 Section 981.401... Administrative Rules and Regulations § 981.401 Adjusted kernel weight. (a) Definition. Adjusted kernel weight... kernels in excess of five percent; less shells, if applicable; less processing loss of one percent for...

  1. Office chairs are often not adjusted by end-users

    NARCIS (Netherlands)

    Vink, P.; Porcar-Seder, R.; Pozo, Á.P. de; Krause, F.

    2007-01-01

    To find out how many office workers adjust their chairs, 350 office workers in Spain and the Netherlands are observed and questioned on whether they adjust their chairs. It appears that 24% of 236 Spanish office workers and 61% of 100 Dutch subjects never adjust their chair. If the chair is

  2. 29 CFR 1202.12 - National Air Transport Adjustment Board.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 4 2010-07-01 2010-07-01 false National Air Transport Adjustment Board. 1202.12 Section... § 1202.12 National Air Transport Adjustment Board. Under section 205, title II, of the Railway Labor Act... four representatives to constitute a Board known as the National Air Transport Adjustment Board. Two...

  3. Attitudes about Help-Seeking Mediate the Relation between Parent Attachment and Academic Adjustment in First-Year College Students

    Science.gov (United States)

    Holt, Laura J.

    2014-01-01

    Although numerous studies have documented an association between parent attachment and college student adjustment, less is known about the mechanisms that underlie this relation. Accordingly, this short-term longitudinal study examined first-year college students' attitudes about academic help-seeking as one possible mechanism. As predicted,…

  4. Suicidal Tendency Among Adolescents With Adjustment Disorder.

    Science.gov (United States)

    Ferrer, Laia; Kirchner, Teresa

    2015-01-01

    Adolescents with adjustment disorder (AD) are at risk of presenting suicidal symptoms. Certain personality traits are linked to suicidal tendencies. There is a lack of information about the link between suicide and personality patterns in adolescents with AD. To identify the personality characteristics that predispose to or prevent the development of suicidal ideation and behavior among adolescents with AD. We recruited 108 adolescents with AD at a public mental health center near Barcelona (Spain). They were administered the Inventario de Riesgo Suicida para Adolescentes (IRIS) to assess suicidal symptoms, as well as the Millon Adolescent Clinical Inventory (MACI) and the 16PF Adolescent Personality Questionnaire (16PF-APQ) to appraise personality features. Doleful personality emerged as the principal risk for suicidal symptoms. The conforming personality pattern exerted a protective effect, and emotional stability was associated with low levels of suicidal tendencies. Among the Big Five factors, anxiety had the highest explanatory power for suicidal tendencies. Certain personality characteristics are associated with heightened or reduced risk of suicidal tendencies in adolescents with AD. Their identification is important for clinicians designing treatment programs for these patients.

  5. Accelerated adjustment in the German hardcoal industry

    International Nuclear Information System (INIS)

    Semrau, G.

    1994-01-01

    The worsening overall economic situation and the steel crisis necessitate an accelerated adjustment of the production capacity and the output. In 1993 hardcoal production was reduced by almost 8 Mtce or 12% to some 59 Mtce. The coke production of the colliery-owned coke oven plants was even reduced by 27%. Following the strong decline of deliveries in 1992 (-6 Mt), the sale of hardcoal and coke fell by another 4 Mt to about 60 Mtce in 1993. The high sales losses resulted in a further increase in stock. At the end of 1993 23 Mt coal had been stockpiled and burdened the results and liquidity of the hardcoal mining companies. The loss of jobs is aggravating. At the end of 1993 the hardcoal industry employed a workforce of 113500, of those 106300 own employees and 7300 workers form contractors. In the course of the year 10600 jobs were lost totaling up to about 55000 since the 1987 coal round. With an underground OMS of 5267 kg the hardcoal industry has reached the highest productivity level so far. In 1994 the hardcoal industry will continue to contract. The hardcoal output is to be reduced to less than 53 Mtce to achieve a reduction of stock in the mining companies. (orig.)

  6. Design of precision position adjustable scoop

    International Nuclear Information System (INIS)

    Li Zhili; Zhang Kai; Dong Jinping

    2014-01-01

    In isotopes separation technologies, the centrifuge method has been the most popular technology now. Separation performance of centrifugal machines is greatly influenced by the flow field in the centrifugal machines. And the position of scoops in the centrifuges has a significant influence on the flow field. To obtain a better flow field characteristic and find the best position of scoops in the centrifuges, a position adjustable scoop system was studied. A micro stage and a linear encoder were used in the system to improve the position accuracy of the scoop. Eddy current sensors had been used in a position calibration measurement. The measurement result showed the sensitivity and stability of the position system could meet the performance expectation. But as the driving mean, the steel wire and pulley limit the control precision. On the basis of this scheme, an ultrasonic motor was used as driving mean. Experimental results showed the control accuracy was improved. This scheme laid a foundation to obtain internal flow field parameters of centrifuge and get the optimal feeding tube position. (authors)

  7. Severe neurological complication following adjustable gastric banding.

    Science.gov (United States)

    Martines, G; Musa, N; Aquilino, F; Capuano, P

    2018-01-01

    In the last years with the increase of bariatric surgery, first of all as a result of new indications, a rise in the incidence of nutrient-related complications has been observed. Currently little is known about the impact of post-bariatric malnutrition and neurological complications. Wernicke's encephalopathy is a severe neurological syndrome which occurs as a result of thiamine deficiency. Wernicke-Korsakoff syndrome must be considered a serious neurological complication of bariatric surgery with significant morbidity and mortality, with rapidly progressing neurological symptoms, and must be treated immediately. We report the case of a 35 years-old male patient, affected by morbid obesity, anxious-depressive syndrome and alcohol use disorder, who after adjustable gastric banding implanted in another hospital developed a severe malnutrition and neurological syndrome. The patient showed poor adherence to the follow-up and to the dietary indications and after all, we needed to place a PEG for enteral nutrition in order to resolve the malnutrition condition and the neurological syndrome. Our experience emphasizes that preoperative selection and assessment of a patient's nutritional status according to guidelines, is required to identify potential problems, and that bariatric surgeons or physicians caring for patient who have undergone bariatric surgery should be familiar with the constellation of nutritional and neurological disorder that may occur after surgery. We want to remark the importance of preoperative selection of the patients, the follow-up and the cooperation between patient and physician in order to obtain the best result and avoid severe complications.

  8. Industry adjusts 1992 E and P budgets

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This paper reports that a midyear update of Salomon Bros. survey of the petroleum industry's 1992 exploration and production budgets pinpoints the ways operators are adjusting outlays to match the times. The New York financial firm's latest tally shows: Operators have made deep cuts in their 1992 US and Canadian E and P budgets since yearend 1991. Moderate increases budgeted earlier for E and P outside North America are intact. Many companies substantially underspent their budgets in first half 1992. In Salomon Bros. Largest survey---247 companies responded---operators the they were budgeting a 3.2% year to year decline in their 1992 worldwide E and P spending, compared with a 1.3% increase planned for 1992 in December 1991. The decline in spending falls entirely in North America. Preliminary indications suggest that 1993 E and P spending will be relatively flat in the US and flat to moderately increased in Canada. Elsewhere, spending should continue to rise steadily in 1993, Salomon Bros. The. Budgets exclude producing property purchases and merger or acquisition of other companies when possible

  9. Adjusting Beliefs via Transformed Fuzzy Priors

    Science.gov (United States)

    Rattanadamrongaksorn, T.; Sirikanchanarak, D.; Sirisrisakulchai, J.; Sriboonchitta, S.

    2018-02-01

    Instead of leaving a decision to a pure data-driven system, intervention and collaboration by human would be preferred to fill the gap that machine cannot perform well. In financial applications, for instance, the inference and prediction during structural changes by critical factors; such as market conditions, administrative styles, political policies, etc.; have significant influences to investment strategies. With the conditions differing from the past, we believe that the decision should not be made by only the historical data but also with human estimation. In this study, the updating process by data fusion between expert opinions and statistical observations is thus proposed. The expert’s linguistic terms can be translated into mathematical expressions by the predefined fuzzy numbers and utilized as the initial knowledge for Bayesian statistical framework via the possibility-to-probability transformation. The artificial samples on five scenarios were tested in the univariate problem to demonstrate the methodology. The results showed the shifts and variations appeared on the parameters of the distributions and, as a consequence, adjust the degrees of belief accordingly.

  10. Bidirectional associations between emotions and school adjustment.

    Science.gov (United States)

    Hernández, Maciel M; Eisenberg, Nancy; Valiente, Carlos; Spinrad, Tracy L; Berger, Rebecca H; VanSchyndel, Sarah K; Silva, Kassondra M; Diaz, Anjolii; Thompson, Marilyn S; Gal, Diana E; Southworth, Jody

    2017-11-24

    We examined the relations of children's (N = 301) observed expression of negative and positive emotion in classes or nonclassroom school contexts (i.e., lunch and recess) to school adjustment from kindergarten to first grade. Naturalistic observations of children's emotional expressivity were collected, as were teachers' reports of children's school engagement and relationship quality with teachers and peers. In longitudinal panel models, greater teacher-student conflict and lower student engagement in kindergarten predicted greater negative expressivity in both school contexts. School engagement and peer acceptance in kindergarten positively predicted first grade positive emotion in the classroom. Suggestive of possible bidirectional relations, there was also small unique prediction (near significant) from negative expressivity at lunch and recess to higher teacher-student conflict, from negative expressivity in the classroom to low peer acceptance, and from positive expressivity in the classroom to higher peer acceptance. The pattern of findings suggests that the quality of experience at school uniquely predicts children's emotional expressivity at school more consistently than vice versa-a finding that highlights the important role of school context in young children's emotionality at school. © 2017 Wiley Periodicals, Inc.

  11. PERCEIVED SOCIAL SUPPORT AND PARENTS ADJUSTMENT

    Directory of Open Access Journals (Sweden)

    Patrizia VELOTTI

    2008-12-01

    Full Text Available Social networks often provide an important source of support for new parents. General, parent support programs sustain social-emotional development of children. Different aspects could impact both the quantity and quality of the sources of social support and the perception that parents would had. This study examines the role of social support in the couples of new-parents and assesses the influence of attachment models on it. The Adult Attachment Interview (AAI and the Multidimensional Scale of Perceived Social Support (MSPSS were administered to a sample of 100 participants. Results indicated a perception of social support more pronounced in women, mainly on the dimension of social support derived from the partner. Furthermore, for women and not for men, an association between attachment models to the AAI and the different perceptions of social support was revealed. Data seems support the opportunity to assess parents during early rehabilitation interventions. Support groups could be used with insecure parents and has positive effects in reducing stress and promoting adjustment to the disability for children and their families.

  12. Adjusting ability and sensibility for an accident

    International Nuclear Information System (INIS)

    Rozental, J.J.

    1998-01-01

    Adjusting ability (technical competence) and sensibility (consciousness) are the two most important priorities any staff member of any organization should bear in mind while acting during a nuclear or radiological emergency. The discussion is aimed at the national authorities of states which do not have a major nuclear power reactor programme, and especially at the IAEA and WHO: although a decade has gone by, the lessons from the radiological accident in Goiania have not been fully learned. The events which unravelled in the fall of 1987 took the population of the city of Goiania completely by surprise: they did not comprehend what had happened and failed to grasp what measures needed to be taken, a situation which precipitated a very complex psychological reaction, coupled with discrimination. To ensure the safety of radiation sources and nuclear installations, national and international organizations should direct their efforts towards educating and training staff in developing countries who work with ionizing radiation and promoting organizational capacity. This should be done first, by improving safety qualitatively so as to better control the uses of radioactive materials in medicine, agriculture, industry and research, and secondly, by assisting countries without a major nuclear power reactor programme to develop an objective and realistic emergency response training programme. (author)

  13. Active Sensing System with In Situ Adjustable Sensor Morphology

    Science.gov (United States)

    Nurzaman, Surya G.; Culha, Utku; Brodbeck, Luzius; Wang, Liyu; Iida, Fumiya

    2013-01-01

    Background Despite the widespread use of sensors in engineering systems like robots and automation systems, the common paradigm is to have fixed sensor morphology tailored to fulfill a specific application. On the other hand, robotic systems are expected to operate in ever more uncertain environments. In order to cope with the challenge, it is worthy of note that biological systems show the importance of suitable sensor morphology and active sensing capability to handle different kinds of sensing tasks with particular requirements. Methodology This paper presents a robotics active sensing system which is able to adjust its sensor morphology in situ in order to sense different physical quantities with desirable sensing characteristics. The approach taken is to use thermoplastic adhesive material, i.e. Hot Melt Adhesive (HMA). It will be shown that the thermoplastic and thermoadhesive nature of HMA enables the system to repeatedly fabricate, attach and detach mechanical structures with a variety of shape and size to the robot end effector for sensing purposes. Via active sensing capability, the robotic system utilizes the structure to physically probe an unknown target object with suitable motion and transduce the arising physical stimuli into information usable by a camera as its only built-in sensor. Conclusions/Significance The efficacy of the proposed system is verified based on two results. Firstly, it is confirmed that suitable sensor morphology and active sensing capability enables the system to sense different physical quantities, i.e. softness and temperature, with desirable sensing characteristics. Secondly, given tasks of discriminating two visually indistinguishable objects with respect to softness and temperature, it is confirmed that the proposed robotic system is able to autonomously accomplish them. The way the results motivate new research directions which focus on in situ adjustment of sensor morphology will also be discussed. PMID:24416094

  14. Active sensing system with in situ adjustable sensor morphology.

    Science.gov (United States)

    Nurzaman, Surya G; Culha, Utku; Brodbeck, Luzius; Wang, Liyu; Iida, Fumiya

    2013-01-01

    Despite the widespread use of sensors in engineering systems like robots and automation systems, the common paradigm is to have fixed sensor morphology tailored to fulfill a specific application. On the other hand, robotic systems are expected to operate in ever more uncertain environments. In order to cope with the challenge, it is worthy of note that biological systems show the importance of suitable sensor morphology and active sensing capability to handle different kinds of sensing tasks with particular requirements. This paper presents a robotics active sensing system which is able to adjust its sensor morphology in situ in order to sense different physical quantities with desirable sensing characteristics. The approach taken is to use thermoplastic adhesive material, i.e. Hot Melt Adhesive (HMA). It will be shown that the thermoplastic and thermoadhesive nature of HMA enables the system to repeatedly fabricate, attach and detach mechanical structures with a variety of shape and size to the robot end effector for sensing purposes. Via active sensing capability, the robotic system utilizes the structure to physically probe an unknown target object with suitable motion and transduce the arising physical stimuli into information usable by a camera as its only built-in sensor. The efficacy of the proposed system is verified based on two results. Firstly, it is confirmed that suitable sensor morphology and active sensing capability enables the system to sense different physical quantities, i.e. softness and temperature, with desirable sensing characteristics. Secondly, given tasks of discriminating two visually indistinguishable objects with respect to softness and temperature, it is confirmed that the proposed robotic system is able to autonomously accomplish them. The way the results motivate new research directions which focus on in situ adjustment of sensor morphology will also be discussed.

  15. Arrangement for adjusting the load of a turbine system

    International Nuclear Information System (INIS)

    Aanstadt, O.J.

    1974-01-01

    The invention relates to an adjustment arrangement for steam turbines with at least two stages. The inlet of steam into the two stages is adjusted by means of independant valves, and an adjustment circuit is provided for each of said valves for adjusting same so as to ensure a suitable distribution of power between the stages. The adjustment is carried out by measuring the power generated between the stages thus eliminating the influence of inaccuracies in the valves. This can be applied, in particular, to nuclear power stations [fr

  16. The Mediating Role of Psychological Adjustment between Peer Victimization and Social Adjustment in Adolescence

    OpenAIRE

    Eva M. Romera; Olga Gómez-Ortiz; Rosario Ortega-Ruiz; Rosario Ortega-Ruiz

    2016-01-01

    There is extensive scientific evidence of the serious psychological and social effects that peer victimization may have on students, among them internalizing problems such as anxiety or negative self-esteem, difficulties related to low self-efficacy and lower levels of social adjustment. Although a direct relationship has been observed between victimization and these effects, it has not yet been analyzed whether there is a relationship of interdependence between all these measures of psychoso...

  17. The College Adjustment Questionnaire: A Measure of Students' Educational, Relational, and Psychological Adjustment to the College Environment

    Science.gov (United States)

    O'Donnell, Maeve B.; Shirley, Lauren A.; Park, Stacey S.; Nolen, Julian P.; Gibbons, Alyssa M.; Rosén, Lee A.

    2018-01-01

    Several instruments exist to measure college adjustment: the Student Adaptation to College Questionnaire (SACQ; Baker & Siryk, 1989), the College Adjustment Rating Scale (Zitzow, 1984), and the College Adjustment Scales (Anton & Reed, 1991). Of these, the SACQ is the most widely used and takes a multifaceted approach to measuring college…

  18. Revenge and psychological adjustment after homicidal loss.

    Science.gov (United States)

    van Denderen, Mariëtte; de Keijser, Jos; Gerlsma, Coby; Huisman, Mark; Boelen, Paul A

    2014-01-01

    Feelings of revenge are a common human response to being hurt by others. Among crime victims of severe sexual or physical violence, significant correlations have been reported between revenge and Posttraumatic Stress Disorder (PTSD). Homicide is one of the most severe forms of interpersonal violence. It is therefore likely that individuals bereaved by homicide experience high levels of revenge, which may hamper efforts to cope with traumatic loss. The relationship between revenge and psychological adjustment following homicidal loss has not yet been empirically examined. In the current cross-sectional study, we used self-report data from 331 spouses, family members and friends of homicide victims to examine the relationships between dispositional revenge and situational revenge on the one hand and symptom-levels of PTSD and complicated grief, as well as indices of positive functioning, on the other hand. Furthermore, the association between revenge and socio-demographic and offense-related factors was examined. Participants were recruited from a governmental support organization, a website with information for homicidally bereaved individuals, and members of support groups. Levels of both dispositional and situational revenge were positively associated with symptoms of PTSD and complicated grief, and negatively with positive functioning. Participants reported significantly less situational revenge in cases where the perpetrator was a direct family member than cases where the perpetrator was an indirect family member, friend, or someone unknown. Homicidally bereaved individuals reported more situational revenge, but not more dispositional revenge than a sample of students who had experienced relatively mild interpersonal transgressions. © 2014 Wiley Periodicals, Inc.

  19. Fathers of children with cancer: involvement, coping, and adjustment.

    Science.gov (United States)

    Bennett Murphy, Laura M; Flowers, Stacy; McNamara, Kelly A; Young-Saleme, Tammi

    2008-01-01

    This study examined the role of fathers caring for children with cancer. Psychological adjustment, coping, and work patterns of mothers and fathers were described. Twenty fathers of children with cancer were compared with 20 mothers of children with cancer and 20 control fathers of healthy children. Questionnaire data were collected regarding coping, parental adjustment, child adjustment, and family involvement. Fathers did not differ from mothers or control fathers in terms of psychological adjustment or coping. However, fathers of children with cancer spent more hours at work and more hours caring for children than did control fathers. Paternal adjustment was significantly related to child adjustment only when the child had cancer. Coping was related to work outside the home for fathers and adjustment for mothers. Models of family adaptation may be different for fathers and mothers. Treatment teams must attend to the unique needs of fathers.

  20. Quantum mechanics

    International Nuclear Information System (INIS)

    Anon.

    1990-01-01

    The book is on quantum mechanics. The emphasis is on the basic concepts and the methodology. The chapters include: Breakdown of classical concepts; Quantum mechanical concepts; Basic postulates of quantum mechanics; solution of problems in quantum mechanics; Simple harmonic oscillator; and Angular Momentum

  1. Siblings of Youth with Autism Spectrum Disorders: Theoretical Perspectives on Sibling Relationships and Individual Adjustment

    Science.gov (United States)

    McHale, Susan M.; Updegraff, Kimberly A.; Feinberg, Mark E.

    2015-01-01

    A burgeoning research literature investigates the sibling relationships of youth with Autism Spectrum Disorder (ASD) and their implications for individual adjustment. Focusing on four relationship domains-- behaviors, emotions, cognitions and involvement—and toward advancing this generally atheoretical literature, we review and apply tenets from a range of theoretical perspectives in an effort to illuminate the mechanisms underlying sibling relationship experiences and their adjustment implications. Our review suggests new directions for research to test theoretically-grounded hypotheses about how sibling relationships develop and are linked to individual adjustment. In addition, we consider how identifying underlying bio-psycho-social processes can aid in the development of interventions to promote warm and involved sibling relationships and positive youth development. PMID:26476737

  2. Continuum mechanics

    CERN Document Server

    Spencer, A J M

    2004-01-01

    The mechanics of fluids and the mechanics of solids represent the two major areas of physics and applied mathematics that meet in continuum mechanics, a field that forms the foundation of civil and mechanical engineering. This unified approach to the teaching of fluid and solid mechanics focuses on the general mechanical principles that apply to all materials. Students who have familiarized themselves with the basic principles can go on to specialize in any of the different branches of continuum mechanics. This text opens with introductory chapters on matrix algebra, vectors and Cartesian ten

  3. Nomenclatural adjustments in African plants 1

    Directory of Open Access Journals (Sweden)

    Peter Goldblatt

    2014-12-01

    Full Text Available Background: Ongoing systematic studies of the African flora necessitate periodic nomenclatural adjustments and corrections. Objectives: To effect requisite nomenclatural changes. Method: Relevant literature was surveyed and type material located and studied. Results: Nomenclatural corrections were published in Justicia L. (Acanthaceae, Babiana KerGawl. and Geissorhiza Ker Gawl. (Iridaceae and Zaluzianskya F.W.Schmidt (Scrophulariaceae. Conclusions: Firstly, a complete enumeration of all southern African species of Justicia was provided within the infrageneric classification for the genus accepted by Graham (1988 and later modified and expanded by Ensermu (1990 and Hedrén (1990. In this circumscription, Justicia includes such well-established segregates in an African context as Adhatoda Miller, Aulojusticia Lindau, Duvernoia E.Mey. ex Nees, Monechma Hochst. and Siphonoglossa Oersted.Both southern African species of Adhatoda were transferred to Justicia, as well as all of the southern African species of Monechma, with eight new combinations or replacement names provided. All species were placed to section within Justicia. Secondly, the type of Gladiolus nervosus Lam. (1788 was considered to be conspecific with Gladiolus strictus Aiton (1789 and is therefore the earliest available name for the species currently known as Babiana stricta (Aiton Ker Gawl. The new combination Babiana nervosa (Lam. Goldblatt & J.C.Manning was provided. Thirdly, Geissorhiza ornithogaloides has been regarded as a new species described by F.W. Klatt (1866 but the name should be treated as the combination G. ornithogaloides (Lichst. ex Roem. & Schult. Klatt, based on Ixia ornithogaloides Lichst. ex Roem. & Schult.(1817a. Examination of the type showed that it is conspecific with Geissorhiza marlothii R.C.Foster (1941 and it is therefore the valid name for the taxon treated as G. ornithogaloides subsp. marlothii (R.C.Foster Goldblatt. An epitype for the taxon was designated

  4. Evaluation of an adjustable epidemiologic information system.

    Directory of Open Access Journals (Sweden)

    Jiunn-Shyan Julian Wu

    Full Text Available BACKGROUND: In order to facilitate public health response and to achieve early control of infectious disease epidemics, an adjustable epidemiologic information system (AEIS was established in the Taiwan public health network in February 2006. METHODOLOGY/PRINCIPAL FINDINGS: The performance of AEIS for the period 2006 through 2008 was evaluated based on a number of response times (RT and the public health impact. After implementation of the system, the apparent overall shortened RT was mainly due to the shortening of personnel response time (PRT and the time needed to draft a new questionnaire that incurred as personnel-system interface (PSI; PRT dropped from a fluctuating range of 9.8 ∼28.8 days in the first four months to <10 days in the following months and remained low till 2008 (0.88±1.52 days. The PSIs for newly emerged infectious diseases were 2.6 and 3.4 person-hours for H5N1 in 2007 and chikungunya in 2008, respectively, a much improvement from 1142.5 person-hours for SARS in 2003. The duration of each rubella epidemic cluster was evaluated as public health impact and showed a shortening trend (p = 0.019 that concurred with the shortening of PRT from 64.8±47.3 to 25.2±38.2 hours per cluster (p<0.0001. CONCLUSIONS/SIGNIFICANCE: The first evaluation of the novel instrument AEIS that had been used to assist Taiwan's multi-level government for infectious diseases control demonstrated that it was well integrated into the existing public health infrastructure. It provided flexible tools and computer algorithms with friendly interface for timely data collection, integration, and analysis; as a result, it shortened RTs, filled in gaps of personnel lacking sufficient experiences, created a more efficient flow of response, and identified asymptomatic/mild cases early to minimize further spreading. With further development, AEIS is anticipated to be useful in the application of other acute public health events needing immediate

  5. A study on the Horizontal Control of a Seat for Heavy Machinery using a Phase Adjusting Technique

    Directory of Open Access Journals (Sweden)

    Kim Chae-sil.

    2016-01-01

    Full Text Available This study proposes a dynamic plant model to simulate the performance of a heavy equipment vehicle seat system. The system controls the transmission of vibration using a phase adjustment control method. First, a dynamic model for the flexible heavy equipment seat is proposed using a commercial multi-body dynamic analysis tool, ADAMS. This model is used as a plant model. Then a phase adjustment control mechanism for reducing the vibration and shock transmitted by the seat is applied to the driving dynamics control plant model. Angle control using the phase adjustment control was confirmed. This technique is expected to be the basis for a future commercial system.

  6. Heating analysis of cobalt adjusters in reactor core

    International Nuclear Information System (INIS)

    Mei Qiliang; Li Kang; Fu Yaru

    2011-01-01

    In order to produce 60 Co source for industry and medicine applications in CANDU-6 reactor, the stainless steel adjusters were replaced with the cobalt adjusters. The cobalt rod will generate the heat when it is irradiated by neutron and γ ray. In addition, 59 Co will be activated and become 60 Co, the ray released due to 60 Co decay will be absorbed by adjusters, and then the adjusters will also generate the heat. So the heating rate of adjusters to be changed during normal operation must be studied, which will be provided as the input data for analyzing the temperature field of cobalt adjusters and the relative heat load of moderator. MCNP code was used to simulate whole core geometric configuration in detail, including reactor fuel, control rod, adjuster, coolant and moderator, and to analyze the heating rate of the stainless steel adjusters and the cobalt adjusters. The maximum heating rate of different cobalt adjuster based on above results will be provided for the steady thermal hydraulic and accident analysis, and make sure that the reactor is safe on the thermal hydraulic. (authors)

  7. ADJUSTMENT DURING THE CRISIS: INSTITUTIONAL BUFFERS ON THE EASTERN EUROPEAN LABOUR MARKETS

    Directory of Open Access Journals (Sweden)

    Pavol Babos

    2014-05-01

    Full Text Available The economic crisis had profound effects on labour markets of the EU member states in terms of a decline in employment and a rise in unemployment. This paper investigates how the states limited the impact of the change in economic output on the employment and the unemployment. The analysis suggests that there are different labour market institutions influencing the impact of the fall in GDP on the employment decline and unemployment increase. The first part of the paper explores and compares the extent to which the labour market institutions cushioned the impact of the economic crisis on the EU countries. The second part of this paper provides an in-depth comparative analysis of the labour market institutions and the adjustment mechanisms in Central Eastern European countries: Latvia, Slovenia and Slovakia. In the end this paper suggests that the specific institutional setting of a country, according to the Varieties of Capitalism, might shape the form of the government response to the crisis and the effect of particular institutions on the adjustment channels. The study shows that adjustment in Slovenia took place mostly within the firms, while in Latvia the most efficient adjustment channels actuated outside the firms, mostly within the government sponsored training programmes and international migration. In Slovakia, government sponsored adjustment, which focused on maintaining the existing positions, prevailed together with the promotion of self-employment.

  8. US hospital payment adjustments for innovative technology lag behind those in Germany, France, and Japan.

    Science.gov (United States)

    Hernandez, John; Machacz, Susanne F; Robinson, James C

    2015-02-01

    Medicare pioneered add-on payments to facilitate the adoption of innovative technologies under its hospital prospective payment system. US policy makers are now experimenting with broader value-based payment initiatives, but these have not been adjusted for innovation. This article examines the structure, processes, and experience with Medicare's hospital new technology add-on payment program since its inception in 2001 and compares it with analogous payment systems in Germany, France, and Japan. Between 2001 and 2015 CMS approved nineteen of fifty-three applications for the new technology add-on payment program. We found that the program resulted in $201.7 million in Medicare payments in fiscal years 2002-13-less than half the level anticipated by Congress and only 34 percent of the amount projected by CMS. The US program approved considerably fewer innovative technologies, compared to analogous technology payment mechanisms in Germany, France and Japan. We conclude that it is important to adjust payments for new medical innovations within prospective and value-based payment systems explicitly as well as implicitly. The most straightforward method to use in adjusting value-based payments is for the insurer to retrospectively adjust spending targets to account for the cost of new technologies. If CMS made such retrospective adjustments, it would not financially penalize hospitals for adopting beneficial innovations. Project HOPE—The People-to-People Health Foundation, Inc.

  9. A linguistic approach to solving of the problem of technological adjustment of combines

    Directory of Open Access Journals (Sweden)

    Lyudmila V. Borisova

    2017-06-01

    of indistinct production rules, the knowledge base, and characteristics of an algorithm for adjusting of technological adjustments are given. Discussion and Conclusions: The linguistic approach to a technological adjustment of machines provides adequacy of the description of real conditions of cleaning, accounting both quantitative information and heuristic data. The model of subject domain the basis for creation of the knowledge base and the mechanism for conclusing provides solutions of the intellectual system of decision support by the operator when the functioning of combines.

  10. Two aspects of feedforward postural control: anticipatory postural adjustments and anticipatory synergy adjustments.

    Science.gov (United States)

    Klous, Miriam; Mikulic, Pavle; Latash, Mark L

    2011-05-01

    We used the framework of the uncontrolled manifold hypothesis to explore the relations between anticipatory synergy adjustments (ASAs) and anticipatory postural adjustments (APAs) during feedforward control of vertical posture. ASAs represent a drop in the index of a multimuscle-mode synergy stabilizing the coordinate of the center of pressure in preparation to an action. ASAs reflect early changes of an index of covariation among variables reflecting muscle activation, whereas APAs reflect early changes in muscle activation levels averaged across trials. The assumed purpose of ASAs is to modify stability of performance variables, whereas the purpose of APAs is to change magnitudes of those variables. We hypothesized that ASAs would be seen before APAs and that this finding would be consistent with regard to the muscle-mode composition defined on the basis of different tasks and phases of action. Subjects performed a voluntary body sway task and a quick, bilateral shoulder flexion task under self-paced and reaction time conditions. Surface muscle activity of 12 leg and trunk muscles was analyzed to identify sets of 4 muscle modes for each task and for different phases within the shoulder flexion task. Variance components in the muscle-mode space and indexes of multimuscle-mode synergy stabilizing shift of the center of pressure were computed. ASAs were seen ∼ 100-150 ms prior to the task initiation, before APAs. The results were consistent with respect to different sets of muscle modes defined over the two tasks and different shoulder flexion phases. We conclude that the preparation for a self-triggered postural perturbation is associated with two types of anticipatory adjustments, ASAs and APAs. They reflect different feedforward processes within the hypothetical hierarchical control scheme, resulting in changes in patterns of covariation of elemental variables and in their patterns averaged across trials, respectively. The results show that synergies quantified

  11. Could LC-NE-Dependent Adjustment of Neural Gain Drive Functional Brain Network Reorganization?

    Directory of Open Access Journals (Sweden)

    Carole Guedj

    2017-01-01

    Full Text Available The locus coeruleus-norepinephrine (LC-NE system is thought to act at synaptic, cellular, microcircuit, and network levels to facilitate cognitive functions through at least two different processes, not mutually exclusive. Accordingly, as a reset signal, the LC-NE system could trigger brain network reorganizations in response to salient information in the environment and/or adjust the neural gain within its target regions to optimize behavioral responses. Here, we provide evidence of the co-occurrence of these two mechanisms at the whole-brain level, in resting-state conditions following a pharmacological stimulation of the LC-NE system. We propose that these two mechanisms are interdependent such that the LC-NE-dependent adjustment of the neural gain inferred from the clustering coefficient could drive functional brain network reorganizations through coherence in the gamma rhythm. Via the temporal dynamic of gamma-range band-limited power, the release of NE could adjust the neural gain, promoting interactions only within the neuronal populations whose amplitude envelopes are correlated, thus making it possible to reorganize neuronal ensembles, functional networks, and ultimately, behavioral responses. Thus, our proposal offers a unified framework integrating the putative influence of the LC-NE system on both local- and long-range adjustments of brain dynamics underlying behavioral flexibility.

  12. Comparison between clinical significance of height-adjusted and weight-adjusted appendicular skeletal muscle mass.

    Science.gov (United States)

    Furushima, Taishi; Miyachi, Motohiko; Iemitsu, Motoyuki; Murakami, Haruka; Kawano, Hiroshi; Gando, Yuko; Kawakami, Ryoko; Sanada, Kiyoshi

    2017-02-13

    This study aimed to compare relationships between height- or weight-adjusted appendicular skeletal muscle mass (ASM/Ht 2 or ASM/Wt) and risk factors for cardiometabolic diseases or osteoporosis in Japanese men and women. Subjects were healthy Japanese men (n = 583) and women (n = 1218). The study population included a young group (310 men and 357 women; age, 18-40 years) and a middle-aged and elderly group (273 men and 861 women; age, ≥41 years). ASM was measured by dual-energy X-ray absorptiometry. The reference values for class 1 and 2 sarcopenia in each sex were defined as values one and two standard deviations below the sex-specific means of the young group, respectively. The reference values for class 1 and 2 sarcopenia defined by ASM/Ht 2 were 7.77 and 6.89 kg/m 2 in men and 6.06 and 5.31 kg/m 2 in women, respectively. The reference values for ASM/Wt were 35.0 and 32.0% in men and 29.6 and 26.4% in women, respectively. In both men and women, ASM/Wt was negatively correlated with higher triglycerides (TG) and positively correlated with serum high-density lipoprotein cholesterol (HDL-C), but these associations were not found in height-adjusted ASM. In women, TG, systolic blood pressure, and diastolic blood pressure in sarcopenia defined by ASM/Wt were significantly higher than those in normal subjects, but these associations were not found in sarcopenia defined by ASM/Ht 2 . Whole-body and regional bone mineral density in sarcopenia defined by ASM/Ht 2 were significantly lower than those in normal subjects, but these associations were not found in sarcopenia defined by ASM/Wt. Weight-adjusted definition was able to identify cardiometabolic risk factors such as TG and HDL-C while height-adjusted definition could identify factors for osteoporosis.

  13. Admission Control Threshold in Cellular Relay Networks with Power Adjustment

    Directory of Open Access Journals (Sweden)

    Lee Ki-Dong

    2009-01-01

    Full Text Available Abstract In the cellular network with relays, the mobile station can benefit from both coverage extension and capacity enhancement. However, the operation complexity increases as the number of relays grows up. Furthermore, in the cellular network with cooperative relays, it is even more complex because of an increased dimension of signal-to-noise ratios (SNRs formed in the cooperative wireless transmission links. In this paper, we propose a new method for admission capacity planning in a cellular network using a cooperative relaying mechanism called decode-and-forward. We mathematically formulate the dropping ratio using the randomness of "channel gain." With this, we formulate an admission threshold planning problem as a simple optimization problem, where we maximize the accommodation capacity (in number of connections subject to two types of constraints. (1 A constraint that the sum of the transmit powers of the source node and relay node is upper-bounded where both nodes can jointly adjust the transmit power. (2 A constraint that the dropping ratio is upper-bounded by a certain threshold value. The simplicity of the problem formulation facilitates its solution in real-time. We believe that the proposed planning method can provide an attractive guideline for dimensioning a cellular relay network with cooperative relays.

  14. Dyadic coping mediates the relationship between parents' grief and dyadic adjustment following the loss of a child.

    Science.gov (United States)

    Albuquerque, Sara; Narciso, Isabel; Pereira, Marco

    2018-01-01

    This study aimed to examine forms of dyadic coping (DC) as mediators of the association between parents' grief response and dyadic adjustment and to determine whether these indirect effects were moderated by the child's type of death, timing of death, and age. The study design was cross-sectional. The sample consisted of 197 bereaved parents. Participants completed the Prolonged Grief Disorder Scale, Revised Dyadic Adjustment Scale, and Dyadic Coping Inventory. Significant indirect effects of parents' grief response on dyadic adjustment were found through stress communication by oneself and by the partner, positive and negative DC by the partner, and joint DC. The timing of death moderated the association between grief response and dyadic adjustment and between joint DC and dyadic adjustment. Grief response was negatively associated with dyadic adjustment only when the death occurred after birth. Grief response was negatively associated with joint DC, which, in turn, was positively associated with dyadic adjustment, when the death occurred both before and after birth. However, the association was stronger in the latter. Specific forms of DC might be mechanisms through which grief response is associated with dyadic adjustment and should be promoted in clinical practice.

  15. Territorial differentiation of incomes adjusted for inflation

    Directory of Open Access Journals (Sweden)

    Marina Valeryevna, Moroshkina

    2017-06-01

    Full Text Available Objective to analyze and evaluate the regional disparities of socioeconomic development of the Russian regions in terms of income differentiation adjusted for the level of inflation. Methods indicator by which to measure the level of regional growth heterogeneity is Gini coefficient allowing to determine the degree of the Russian regionsrsquo deviation from absolute equality. The unique feature of the authorrsquos approach is the calculation and analysis of the Gini coefficient not only in current prices but also in comparable prices of 1991. Thus the comparison of the Gini coefficient in terms of quotper capita incomequot in the period from 1991 to 2013 in comparable and current prices allows to estimate the impact of changes in the prices level on the dynamics of regional development. Results the article states that the regions differentiation by the level of economic development determines the necessity of considering this factor in economic policy areas. In these circumstances the analysis of income differentiation of the Russian regions has to take the impact of inflation into account. The article reviews the Russian and foreign research in the sphere of the income differentiation. Significant scientific interest to the problem of regional inequality is obvious over the past several decades. Approaches and methods of assessing the level of regional disparities are systematized as well as its key performance indicators. To assess the level of differentiation of Russian regions we used the Gini coefficient which was calculated not only by current but also by comparable prices. The calculation was carried out basing on the recalculation of the per capita income using the consumer price index. In the framework of the analysis the calculated Gini coefficient for per capita income by current and integrated prices allowed to observe the differential behavior of this indicator. In terms of quotper capita incomequot by current prices there is a

  16. Adjusted neutron spectra of STEK cores for reactivity calculations

    International Nuclear Information System (INIS)

    Dekker, J.W.M.; Dragt, J.B.; Janssen, A.J.; Heijboer, R.J.; Klippel, H.Th.

    1978-02-01

    Neutron flux and adjoint flux spectra form a pre-requisite in the analysis of reactivity worth data measured in the STEK facility. First, a survey of all available information about these spectra is given. Next a special application of a general adjustment method is described. This method has been used to obtain adjusted STEK group flux and adjoint flux spectra, starting from calculated spectra. These theoretical spectra were adjusted to reactivity worths of natural boron (nat. B) and 235 U as well as a number of fission reaction rates. As a by-product in this adjustment calculation adjusted fission group cross sections of 235 U were obtained. The results, viz. group fluxes and adjoint fluxes and adjusted fission cross sections of 235 U are given. They have been used for the interpretation of fission product reactivity worth measurements made in STEK

  17. PIA and REWIND: Two New Methodologies for Cross Section Adjustment

    Energy Technology Data Exchange (ETDEWEB)

    Palmiotti, G.; Salvatores, M.

    2017-02-01

    This paper presents two new cross section adjustment methodologies intended for coping with the problem of compensations. The first one PIA, Progressive Incremental Adjustment, gives priority to the utilization of experiments of elemental type (those sensitive to a specific cross section), following a definite hierarchy on which type of experiment to use. Once the adjustment is performed, both the new adjusted data and the new covariance matrix are kept. The second methodology is called REWIND (Ranking Experiments by Weighting for Improved Nuclear Data). This new proposed approach tries to establish a methodology for ranking experiments by looking at the potential gain they can produce in an adjustment. Practical applications for different adjustments illustrate the results of the two methodologies against the current one and show the potential improvement for reducing uncertainties in target reactors.

  18. A uniform price auction with locational price adjustments for competitive electricity markets

    International Nuclear Information System (INIS)

    Ethier, R.; Mount, T.; Schulze, W.; Zimmerman, R.; Thomas, R.

    1999-01-01

    Competitive electricity markets which rely on centralized dispatch require a mechanism to solicit offers from competing generators. Ideally, such an auction mechanism, provides incentives to submit offers equal to the marginal cost of generation for each generator. Economic theory suggests that the Uniform Price auction is an appropriate institution. However, an efficient implementation of this auction in an electricity context requires that the offers used in the auction reflect the appropriate locational price adjustments for transmission losses and congestion. This paper describes a uniform price auction that incorporates locational price adjustments on a Web-based platform suitable for experimentation. Preliminary results show dramatically different price and revenue results when compared with a simple continuous Discriminative auction. (author)

  19. On a class of adjustable rate mortgage loans subject to a strict balance principle

    DEFF Research Database (Denmark)

    Astrup Jensen, Bjarne

    We describe the background and the basic funding mechanisms for the type of adjustable rate mortgageloans that were introduced in the Danish market in 1996. Each loan is funded separately by tap issuingpass-through mortgage bonds (`strict balance principle'). The novelty is a funding mechanism...... that usesa roll-over strategy, where long term loans are funded by sequentially issuing short term pass-throughbonds, and the first issuer of these loans obtained a patent on the funding principles in 1999. Publiclyavailable descriptions of the principles leave an impression of very complicated numerical...... algorithms.The algorithms described here show that the essentials can be reduced to a `back of an envelope' complexity.Keywords: Adjustable rate mortgages, balance principle, patent, yield curve riding...

  20. Multidirectional flexible force sensors based on confined, self-adjusting carbon nanotube arrays

    Science.gov (United States)

    Lee, J.-I.; Pyo, Soonjae; Kim, Min-Ook; Kim, Jongbaeg

    2018-02-01

    We demonstrate a highly sensitive force sensor based on self-adjusting carbon nanotube (CNT) arrays. Aligned CNT arrays are directly synthesized on silicon microstructures by a space-confined growth technique which enables a facile self-adjusting contact. To afford flexibility and softness, the patterned microstructures with the integrated CNTs are embedded in polydimethylsiloxane structures. The sensing mechanism is based on variations in the contact resistance between the facing CNT arrays under the applied force. By finite element analysis, proper dimensions and positions for each component are determined. Further, high sensitivities up to 15.05%/mN of the proposed sensors were confirmed experimentally. Multidirectional sensing capability could also be achieved by designing multiple sets of sensing elements in a single sensor. The sensors show long-term operational stability, owing to the unique properties of the constituent CNTs, such as outstanding mechanical durability and elasticity.

  1. Adjustment of Romanian Immigrant Students in a New Educational Context

    OpenAIRE

    Aniella Mihaela VIERIU

    2014-01-01

    The present study focuses on the adjustment of Romanian immigrant students in emigration schools. The sample was comprised of 102 Romanian immigrant students, 40 male and 62 female, between the ages of 11 and 18, attending different schools in countries such as Spain, Italy and Belgium. Students’ adjustment was investigated by means of a questionnaire consisting of four subscales: linguistic adaptation, cultural adaptation, school adjustment and teacher-student relationship. Results indicate ...

  2. Technique for simultaneous adjustment of large nuclear data libraries

    International Nuclear Information System (INIS)

    Harris, D.R.; Wilson, W.B.

    1975-01-01

    Adjustment of the nuclear data base to agree with integral observations in design work has been limited in part by problems in the required inversion of matrices. It is shown that this inversion problem can be circumvented and arbitrarily large nuclear data libraries can be adjusted simultaneously when the basic data are uncorrelated. The technique is illustrated by adjusting nuclear data to integral observations made on fast reactor benchmark critical assemblies. 3 tables

  3. 25 CFR Appendix B to Subpart C - Population Adjustment Factor

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Population Adjustment Factor B Appendix B to Subpart C...—Population Adjustment Factor 1. The Population Adjustment Factor allows for participation in the IRR Program... Distribution factor* Number of tribes** Funding amount per tribe Less than 25 1 N1 MBA*** × 1 25-100 3.5 N2 MBA...

  4. INSTITUTIONAL OWNERSHIP LEVEL AND RISK-ADJUSTED RETURN

    OpenAIRE

    Isaiah, Chioma; Li, Meng (Emma)

    2017-01-01

    This paper examines the relationship between the level of institutional ownership andrisk-adjusted return on stocks. We find a significant positive relationship between the level ofinstitutional ownership on a stock and its risk-adjusted return. This result holds both in the longrun and in shorter time periods. Our findings suggest that all things being equal, it is possible toobtain risk-adjusted return by going short on the stocks with low institutional ownership andgoing long on those with...

  5. Rebalancing; Evidence from Current Account Adjustment in Europe

    OpenAIRE

    Ruben V Atoyan; Jonathan F Manning; Jesmin Rahman

    2013-01-01

    After the 2003-2007 economic boom, European countries with large pre-crisis current account imbalances are undergoing adjustments. Countries are adjusting at different paces and ways reflecting the source and magnitude of imbalances, availability of financing, competitiveness of the tradable sector and external environment. While emerging European countries with large pre-crisis imbalances and a fixed exchange rate regime have seen sharp current account adjustments and a rebound in growth, ad...

  6. Mechanical Ventilation

    Science.gov (United States)

    ... ventilation is a life support treatment. A mechanical ventilator is a machine that helps people breathe when ... to breathe enough on their own. The mechanical ventilator is also called a ventilator , respirator, or breathing ...

  7. Protocol for the saMS trial (supportive adjustment for multiple sclerosis: a randomized controlled trial comparing cognitive behavioral therapy to supportive listening for adjustment to multiple sclerosis

    Directory of Open Access Journals (Sweden)

    McCrone Paul

    2009-08-01

    Full Text Available Abstract Background Multiple Sclerosis (MS is an incurable, chronic, potentially progressive and unpredictable disease of the central nervous system. The disease produces a range of unpleasant and debilitating symptoms, which can have a profound impact including disrupting activities of daily living, employment, income, relationships, social and leisure activities, and life goals. Adjusting to the illness is therefore particularly challenging. This trial tests the effectiveness of a Cognitive Behavioural intervention compared to Supportive Listening to assist adjustment in the early stages of MS. Methods/Design This is a two arm randomized multi-centre parallel group controlled trial. 122 consenting participants who meet eligibility criteria will be randomly allocated to receive either Cognitive Behavioral Therapy or Supportive Listening. Eight one hour sessions of therapy (delivered over a period of 10 weeks will be delivered by general nurses trained in both treatments. Self-report questionnaire data will be collected at baseline (0 weeks, mid-therapy (week 5 of therapy, post-therapy (15 weeks and at six months (26 weeks and twelve months (52 weeks follow-up. Primary outcomes are distress and MS-related social and role impairment at twelve month follow-up. Analysis will also consider predictors and mechanisms of change during therapy. In-depth interviews to examine participants' experiences of the interventions will be conducted with a purposively sampled sub-set of the trial participants. An economic analysis will also take place. Discussion This trial is distinctive in its aims in that it aids adjustment to MS in a broad sense. It is not a treatment specifically for depression. Use of nurses as therapists makes the interventions potentially viable in terms of being rolled out in the NHS. The trial benefits from incorporating patient input in the development and evaluation stages. The trial will provide important information about the

  8. Text Categorization Using Weight Adjusted k-Nearest Neighbor Classification

    National Research Council Canada - National Science Library

    Han, Euihong; Karypis, George; Kumar, Vipin

    1999-01-01

    .... The authors present a nearest neighbor classification scheme for text categorization in which the importance of discriminating words is learned using mutual information and weight adjustment techniques...

  9. Methodological aspects of journaling a dynamic adjusting entry model

    Directory of Open Access Journals (Sweden)

    Vlasta Kašparovská

    2011-01-01

    Full Text Available This paper expands the discussion of the importance and function of adjusting entries for loan receivables. Discussion of the cyclical development of adjusting entries, their negative impact on the business cycle and potential solutions has intensified during the financial crisis. These discussions are still ongoing and continue to be relevant to members of the professional public, banking regulators and representatives of international accounting institutions. The objective of this paper is to evaluate a method of journaling dynamic adjusting entries under current accounting law. It also expresses the authors’ opinions on the potential for consistently implementing basic accounting principles in journaling adjusting entries for loan receivables under a dynamic model.

  10. Mechanical design

    CERN Document Server

    Risitano, Antonino

    2011-01-01

    METHODOLOGICAL STATEMENT OF ENGINEERING DESIGNApproaches to product design and developmentMechanical design and environmental requirementsPROPERTIES OF ENGINEERING MATERIALSMaterials for mechanical designCharacterization of metalsStress conditionsFatigue of materialsOptimum material selection in mechanical designDESIGN OF MECHANICAL COMPONENTS AND SYSTEMSFailure theoriesHertz theoryLubrificationShafts and bearingsSplines and keysSpringsFlexible machine elementsSpur gearsPress and shrink fitsPressure tubesCouplingsClutchesBrakes

  11. Risk adjusted financial costs of photovoltaics

    Energy Technology Data Exchange (ETDEWEB)

    Szabo, Sandor; Jaeger-Waldau, Arnulf [Joint Research Centre, Institute for Energy, Via E. Fermi 2749, I-21020 Ispra (Italy); Szabo, Laszlo [Joint Research Centre, Institute for Prospective Technological Studies C. Inca Garcilaso, 3. E-41092 Sevilla (Spain)

    2010-07-15

    Recent research shows significant differences in the levelised photovoltaics (PV) electricity cost calculations. The present paper points out that no unique or absolute cost figure can be justified, the correct solution is to use a range of cost figures that is determined in a dynamic power portfolio interaction within the financial scheme, support mechanism and industry cost reduction. The paper draws attention to the increasing role of financial investors in the PV segment of the renewable energy market and the importance they attribute to the risks of all options in the power generation portfolio. Based on these trends, a former version of a financing model is adapted to project the energy mix changes in the EU electricity market due to investors behaviour with different risk tolerance/aversion. The dynamic process of translating these risks into the return expectation in the financial appraisal and investment decision making is also introduced. By doing so, the paper sets up a potential electricity market trend with the associated risk perception and classification. The necessary risk mitigation tasks for all stakeholders in the PV market are summarised which aims to avoid the burden of excessive risk premiums in this market segment. (author)

  12. Risk adjusted financial costs of photovoltaics

    International Nuclear Information System (INIS)

    Szabo, Sandor; Jaeger-Waldau, Arnulf; Szabo, Laszlo

    2010-01-01

    Recent research shows significant differences in the levelised photovoltaics (PV) electricity cost calculations. The present paper points out that no unique or absolute cost figure can be justified, the correct solution is to use a range of cost figures that is determined in a dynamic power portfolio interaction within the financial scheme, support mechanism and industry cost reduction. The paper draws attention to the increasing role of financial investors in the PV segment of the renewable energy market and the importance they attribute to the risks of all options in the power generation portfolio. Based on these trends, a former version of a financing model is adapted to project the energy mix changes in the EU electricity market due to investors behaviour with different risk tolerance/aversion. The dynamic process of translating these risks into the return expectation in the financial appraisal and investment decision making is also introduced. By doing so, the paper sets up a potential electricity market trend with the associated risk perception and classification. The necessary risk mitigation tasks for all stakeholders in the PV market are summarised which aims to avoid the burden of excessive risk premiums in this market segment.

  13. NLC Mechanical

    Science.gov (United States)

    text only Mechanical Systems.gif (14697 bytes) NLC Home Page NLC Technical SLAC Permanent Magnets Organization Overview The Mechanical Systems Group Organization is shown on the NLC Project Group Organization Chart (Next Linear Collider Technical Web Page). The Mechanical Systems Group operates on a matrixed

  14. Mechanical Kinesiology.

    Science.gov (United States)

    Barham, Jerry N.

    Mechanical kinesiology is defined as a study of the mechanical factors affecting human movement, i.e., applying the physical laws of mechanics to the study of human motor behavior. This textbook on the subject is divided into thirty lessons. Each lesson is organized into three parts: a part on the text proper; a part entitled "study…

  15. Mechanisms Design

    DEFF Research Database (Denmark)

    Restrepo-Giraldo, John Dairo

    2006-01-01

    Most products and machines involve some kind of controlled movement. From window casements to DVD players, from harbor cranes to the shears to prune your garden, all these machines require mechanisms to move. This course intends to provide the analytical and conceptual tools to design such mechan......Most products and machines involve some kind of controlled movement. From window casements to DVD players, from harbor cranes to the shears to prune your garden, all these machines require mechanisms to move. This course intends to provide the analytical and conceptual tools to design...... using criteria such as size, performance parameters, operation environment, etc. Content: Understanding Mechanisms Design (2 weeks) Definitions, mechanisms representations, kinematic diagrams, the four bar linkage, mobility, applications of mechanisms, types of mechanisms, special mechanisms, the design......: equations for various mechanisms. At the end of this module you will be able to analyze existing mechanisms and to describe their movement. Designing mechanisms (7 weeks) Type synthesis and dimensional synthesis, function generation, path generation, three precision points in multi-loop mechanisms...

  16. Mechanical harvesting of pumpkin seeds

    OpenAIRE

    Sito, Stjepan; Ivančan, Stjepan; Barković, Edi; Mucalo, Ana

    2009-01-01

    One of the key problems in production technology of pumpkin seed for oil production is mechanized harvesting and losses of seed during mechanical harvesting. The losses of pumpkin seed during mechanical harvesting at peripheral velocity of 1.57 m/s (optimally adjusted machine) were 4.4% for Gleisdorf species, 5.2% for Slovenska species and 7.8% for pumpkin with husk. The higher average losses of pumpkin seed with husk were caused by tight connection of seed and pumpkin fruit.

  17. Context Specificity of Post-Error and Post-Conflict Cognitive Control Adjustments

    Science.gov (United States)

    Forster, Sarah E.; Cho, Raymond Y.

    2014-01-01

    There has been accumulating evidence that cognitive control can be adaptively regulated by monitoring for processing conflict as an index of online control demands. However, it is not yet known whether top-down control mechanisms respond to processing conflict in a manner specific to the operative task context or confer a more generalized benefit. While previous studies have examined the taskset-specificity of conflict adaptation effects, yielding inconsistent results, control-related performance adjustments following errors have been largely overlooked. This gap in the literature underscores recent debate as to whether post-error performance represents a strategic, control-mediated mechanism or a nonstrategic consequence of attentional orienting. In the present study, evidence of generalized control following both high conflict correct trials and errors was explored in a task-switching paradigm. Conflict adaptation effects were not found to generalize across tasksets, despite a shared response set. In contrast, post-error slowing effects were found to extend to the inactive taskset and were predictive of enhanced post-error accuracy. In addition, post-error performance adjustments were found to persist for several trials and across multiple task switches, a finding inconsistent with attentional orienting accounts of post-error slowing. These findings indicate that error-related control adjustments confer a generalized performance benefit and suggest dissociable mechanisms of post-conflict and post-error control. PMID:24603900

  18. Discrete mechanics

    CERN Document Server

    Caltagirone, Jean-Paul

    2014-01-01

    This book presents the fundamental principles of mechanics to re-establish the equations of Discrete Mechanics. It introduces physics and thermodynamics associated to the physical modeling.  The development and the complementarity of sciences lead to review today the old concepts that were the basis for the development of continuum mechanics. The differential geometry is used to review the conservation laws of mechanics. For instance, this formalism requires a different location of vector and scalar quantities in space. The equations of Discrete Mechanics form a system of equations where the H

  19. Discrete mechanics

    International Nuclear Information System (INIS)

    Lee, T.D.

    1985-01-01

    This paper reviews the role of time throughout all phases of mechanics: classical mechanics, non-relativistic quantum mechanics, and relativistic quantum theory. As an example of the relativistic quantum field theory, the case of a massless scalar field interacting with an arbitrary external current is discussed. The comparison between the new discrete theory and the usual continuum formalism is presented. An example is given of a two-dimensional random lattice and its duel. The author notes that there is no evidence that the discrete mechanics is more appropriate than the usual continuum mechanics

  20. Empirical Evidence of Target Leverage, Adjustment Costs and Adjustment Speed of Non-Financial Firms in Selected African Countries

    OpenAIRE

    Oyebola Fatima Etudaiye-Muhtar; Oyebola Fatima Etudaiye-Muhtar; Rubi Ahmad

    2015-01-01

    The issue of target leverage for corporate firms in developing countries has received little attention in extant literature, especially countries in Africa. Given the imperfection that exists in African financial markets that may limit firms access to external capital, this study investigates dynamic adjustment towards a target debt ratio. In addition, the study used a dynamic panel data estimation technique to determine adjustment costs and speed of adjustment in non-financial firms in selec...

  1. A SURVEY OF DEATH ADJUSTMENT IN THE INDIAN SUBCONTINENT.

    Science.gov (United States)

    Hossain, Mohammad Samir; Irfan, Muhammad; Balhara, Yatan Pal Singh; Giasuddin, Noor Ahmed; Sultana, Syeda Naheed

    2015-01-01

    The Death Adjustment Hypothesis (DAH) postulates two key themes. Its first part postulates that death should not be considered the end of existence and the second part emphasizes that the belief in immortal pattern of human existence can only be adopted in a morally rich life with the attitude towards morality and materialism balanced mutually. We wanted to explore Death Adjustment in the Indian subcontinent and the differences among, Indians, Pakistanis and Bangladeshis. We also wanted to find the relationship between death adjustment (i.e., adaptation to death), materialistic thoughts and death adjustment thoughts. This was a cross-sectional study, conducted from May 2010 to June 2013. Using a purposive sampling strategy, a sample of 296 participants from the Indian subcontinent [Pakistan (n=100), Bangladesh (n=98) and India (n=98)] was selected. Multidimensional Fear of Death Scale (MFODS) was used to measure death adjustment. The rest of the variables were measured using lists of respective thoughts, described in elaborated DAH. Analyses were carried out using SPSSv13. The mean death adjustment score for Pakistani, Indian and Bangaldeshi population were 115.26 +/- 26.4, 125.87 +/- 24.3 and 114.91 +/- 21.2, respectively. Death adjustment was better with older age (r=0.20) and with lower scores on materialistic thoughts (r = -0.26). However, this was a weak relation. The three nationalities were compared with each other by using Analysis of variance. Death adjustment thoughts and death adjustment were significantly different when Indians were compared with Bangladeshis (p=0.00) and Pakistanis (p=0.006) but comparison between Bangladeshis and Pakistanis showed no significant difference. Subjects with lesser materialistic thoughts showed better death adjustment. There are differences between Muslims and non-Muslims in adjusting to death.

  2. Counterbalancing mechanism for X-ray tubeheads

    International Nuclear Information System (INIS)

    Gaber, R.A.; Nilsen, C.G.

    1979-01-01

    A gas spring mechanism for counterbalancing x-ray tubeheads is described. The mechanism is characterized by an absence of cams, chains or springs, and yet it permits tubeheads having wide weight and inertia variations to be accurately counterbalanced by the single adjustment of a screw. (U.K.)

  3. 78 FR 67938 - Adjustment of Determination of Compulsory License Rates for Mechanical and Digital Phonorecords

    Science.gov (United States)

    2013-11-13

    ... novel question of law: the question of the Judges' authority regarding ``imposing requirements on what a... provided by a licensee with respect to the computation of a subminimum, shall be maintained in confidence... respect to the computation of a subminimum, shall not be used for any other purpose, and shall not be...

  4. Management Responses to the global Financial Crisis in Germany: adjustment mechanisms at establishment level

    NARCIS (Netherlands)

    Zagelmeyer, S.J.; Heckmann, M.; Kettner, A.

    2012-01-01

    Between 2008 and 2010, the German economy faced the most serious economic downturn since the Second World War. The German Federal government, the state governments and the social partners have introduced and/or adapted a wide range of policy instruments to cope with the situation. Companies affected

  5. THE CURRENT ACCOUNT DEFICIT AND THE FIXED EXCHANGE RATE. ADJUSTING MECHANISMS AND MODELS.

    Directory of Open Access Journals (Sweden)

    HATEGAN D.B. Anca

    2010-07-01

    Full Text Available The main purpose of the paper is to explain what measures can be taken in order to fix the trade deficit, and the pressure that is upon a country by imposing such measures. The international and the national supply and demand conditions change rapidly, and if a country doesn’t succeed in keeping a tight control over its deficit, a lot of factors will affect its wellbeing. In order to reduce the external trade deficit, the government needs to resort to several techniques. The desired result is to have a balanced current account, and therefore, the government is free to use measures such as fixing its exchange rate, reducing government spending etc. We have shown that all these measures will have a certain impact upon an economy, by allowing its exports to thrive and eliminate the danger from excessive imports, or vice-versa. The main conclusion our paper is that government intervention is allowed in order to maintain the balance of the current account.

  6. 77 FR 29259 - Adjustment of Determination of Compulsory License Rates for Mechanical and Digital Phonorecords

    Science.gov (United States)

    2012-05-17

    ..., music bundles, paid locker services and purchased content locker services. DATES: Comments and... Mobility LLC (``AT&T Mobility''); Rdio, Inc. (``Rdio''); Apple, Inc. (``Apple''); the Recording Industry... Association of Independent Music (``A2IM''); Music Reports, Inc. (``Music Reports''); the National Music...

  7. THE ADJUSTEMENT OF THE BANKING MECHANISM FOR FINANCING ECONOMY UNDER CRISIS CONDITIONS

    Directory of Open Access Journals (Sweden)

    Istrate Luminita Gabriela

    2012-12-01

    Full Text Available Development of complex financial products and necessity of reducing the costs encourages the creation of groups with multiple activities in the financial sector. Structures of financial group are also present in Romanian, and most of them are part of the international groups, provided that the financial capital is mainly foreign. Both the benefits as well as the risks associated to the financial groups present in Romania are limited due to their orientation mainly mono-sectorial (very high weight kept by the credit institutions. The National Bank of Romania has an intrinsic role for maintaining the financial stability, taking into consideration the responsibilities that result from its double aspect of monetary and prudential authority. The attributions afferent to the objectives of financial stability are exercised by prudential supervision and regulation of the institutions under its authority, as well as by formulation and efficient transmission of the measures of monetary politics and supervision of functioning under optimum conditions of the payment and reimbursement systems systemically important. At the same time, it is necessary the identification of risks and vulnerabilities of the entire financial system, on the whole and separately, because the financial stability monitoring is preventive. The occurrence and development of some malfunctions, like the incorrect evaluation of risks and inefficiency of capital allocation can affect the stability of the financial and economic system.

  8. A Generic Model for Relative Adjustment Between Optical Sensors Using Rigorous Orbit Mechanics

    Directory of Open Access Journals (Sweden)

    B. Islam

    2008-06-01

    Full Text Available The classical calibration or space resection is the fundamental task in photogrammetry. The lack of sufficient knowledge of interior and exterior orientation parameters lead to unreliable results in the photogrammetric process. One of the earliest in approaches using in photogrammetry was the plumb line calibration method. This method is suitable to recover the radial and decentering lens distortion coefficients, while the remaining interior(focal length and principal point coordinates and exterior orientation parameters have to be determined by a complimentary method. As the lens distortion remains very less it not considered as the interior orientation parameters, in the present rigorous sensor model. There are several other available methods based on the photogrammetric collinearity equations, which consider the determination of exterior orientation parameters, with no mention to the simultaneous determination of inner orientation parameters. Normal space resection methods solve the problem using control points, whose coordinates are known both in image and object reference systems. The non-linearity of the model and the problems, in point location in digital images and identifying the maximum GPS measured control points are the main drawbacks of the classical approaches. This paper addresses mathematical model based on the fundamental assumption of collineariy of three points of two Along-Track Stereo imagery sensors and independent object point. Assuming this condition it is possible to extract the exterior orientation (EO parameters for a long strip and single image together, without and with using the control points. Moreover, after extracting the EO parameters the accuracy for satellite data products are compared in with using single and with no control points.

  9. Price adjustment for traditional Chinese medicine procedures: Based on a standardized value parity model.

    Science.gov (United States)

    Wang, Haiyin; Jin, Chunlin; Jiang, Qingwu

    2017-11-20

    Traditional Chinese medicine (TCM) is an important part of China's medical system. Due to the prolonged low price of TCM procedures and the lack of an effective mechanism for dynamic price adjustment, the development of TCM has markedly lagged behind Western medicine. The World Health Organization (WHO) has emphasized the need to enhance the development of alternative and traditional medicine when creating national health care systems. The establishment of scientific and appropriate mechanisms to adjust the price of medical procedures in TCM is crucial to promoting the development of TCM. This study has examined incorporating value indicators and data on basic manpower expended, time spent, technical difficulty, and the degree of risk in the latest standards for the price of medical procedures in China, and this study also offers a price adjustment model with the relative price ratio as a key index. This study examined 144 TCM procedures and found that prices of TCM procedures were mainly based on the value of medical care provided; on average, medical care provided accounted for 89% of the price. Current price levels were generally low and the current price accounted for 56% of the standardized value of a procedure, on average. Current price levels accounted for a markedly lower standardized value of acupuncture, moxibustion, special treatment with TCM, and comprehensive TCM procedures. This study selected a total of 79 procedures and adjusted them by priority. The relationship between the price of TCM procedures and the suggested price was significantly optimized (p based on a standardized value parity model is a scientific and suitable method of price adjustment that can serve as a reference for other provinces and municipalities in China and other countries and regions that mainly have fee-for-service (FFS) medical care.

  10. COORDINATING HOSPITAL AND COMMUNITY WORK ADJUSTMENT SERVICES. FINAL REPORT.

    Science.gov (United States)

    GOERTZEL, VICTOR; AND OTHERS

    THE GOALS OF THIS STUDY WERE TO USE WORK TO HELP PATIENTS LEAVE THE CAMARILLO STATE HOSPITAL SOONER, BECOME A PART OF THE COMMUNITY, AND BECOME SELF-SUPPORTING. THE PROJECT SELECTED 146 SCHIZOPHRENIC MALES WHO HAD A HISTORY OF POOR WORK ADJUSTMENT. AS PART OF THE TREATMENT, THE MEN WERE PLACED IN THE HOSPITAL BAKERY. AFTER ADJUSTMENT TO THE WORK…

  11. The Perils of "Adjustment Disorder" as a Diagnostic Category

    Science.gov (United States)

    Daniels, John

    2009-01-01

    "Adjustment disorder" occupies a peculiar position in the diagnostic system of the Diagnostic and Statistical Manual of Mental Disorders (4th ed., text rev.; American Psychiatric Association, 2000) straddling the boundary between normal and abnormal psychology. A more human-centered approach in counseling offers a defense of "normal" adjustment as…

  12. Social and Emotional Adjustment of Siblings of Children with Autism

    Science.gov (United States)

    Pilowsky, Tammy; Yirmiya, Nurit; Doppelt, Osnat; Gross-Tsur, Varda; Shalev, Ruth S.

    2004-01-01

    Background: Social and emotional adjustment of siblings of children with autism was examined, to explore their risk or resilience to effects of genetic liability and environmental factors involved in having a sibling with autism. Method: Social-emotional adjustment, behavior problems, socialization skills, and siblings' relationships were compared…

  13. Parenting Styles and Adjustment Outcomes among College Students

    Science.gov (United States)

    Love, Keisha M.; Thomas, Deneia M.

    2014-01-01

    Research has demonstrated that parenting styles partially explain college students' academic adjustment. However, to account for academic adjustment more fully, additional contributors should be identified and tested. We examined the fit of a hypothesized model consisting of parenting styles, indicators of well-being, and academic adjustment…

  14. Planned Hypothesis Tests Are Not Necessarily Exempt from Multiplicity Adjustment

    Science.gov (United States)

    Frane, Andrew V.

    2015-01-01

    Scientific research often involves testing more than one hypothesis at a time, which can inflate the probability that a Type I error (false discovery) will occur. To prevent this Type I error inflation, adjustments can be made to the testing procedure that compensate for the number of tests. Yet many researchers believe that such adjustments are…

  15. Psychological Adjustment in Bullies and Victims of School Violence

    Science.gov (United States)

    Estevez, Estefania; Murgui, Sergio; Musitu, Gonzalo

    2009-01-01

    The present study examined psychosocial adjustment in the following four groups of students: victims, bullies, bully/victims and a control group of adolescents not involved in bullying or victimization problems. Psychosocial adjustment was measured considering as indicators: level of self-esteem, depressive symptomatology, perceived stress,…

  16. Work Identity and Marital Adjustment in Blue-Collar Men.

    Science.gov (United States)

    Gaesser, David L.; Whitbourne, Susan Krauss

    1985-01-01

    Investigated the relationship between work-identity and satisfaction and marital adjustment in 40 married male blue-collar workers, ages 25 to 41 years. Satisfaction with extrinsic work factors related to marital adjustment, while satisfaction with intrinsic work factors negatively related to secondary role salience. Age negatively related to…

  17. Conversations with God: Prayer and Bargaining in Adjustment to Disability

    Science.gov (United States)

    Rodriguez, Valerie J.; Glover-Graf, Noreen M.; Blanco, E. Lisette

    2013-01-01

    The role of religiosity and spirituality in the process of adjustment to disability is of increasing interest to rehabilitation professionals. Beginning with the Kubler-Ross models of grief and adjustment to disability and terminal illness, a number of stage models have included spiritual and religious interactions as a part of the adjustment…

  18. Children's Family Drawings: A Study of Attachment, Personality, and Adjustment

    Science.gov (United States)

    Goldner, Limor; Scharf, Miri

    2011-01-01

    This study examined the relationship between children's attachment security, as manifested in their family drawings, and their personality and adjustment. Family drawings were collected from 222 Israeli children, as well as data regarding their personality and adjustment. Each drawing was coded and classified into 1 of 4 attachment categories…

  19. Study to use graded cobalt adjuster in 540 MWe PHWR

    International Nuclear Information System (INIS)

    Raj, Manish; Fernando, M.P.S.; Pradhan, A.S.; Kumar, A.N.

    2007-01-01

    Full text: There are 17 adjusters in 540 MWe PHWR, which are essentially provided for xenon override function. They also provide flux flattening being in the central region of the reactor core. The present design of adjusters consists of stainless steel tube. The adjuster rods are grouped into 8 banks for movement. Since adjusters are normally fully inserted during reactor operation, they are best suited for production of cobalt 60. The nickel-plated cobalt in the form of either slugs or pellet are used for the design of cobalt pencils. The number of pencils can be varied to optimize the reactivity load and cobalt 60 production requirement. The worth and activity of cobalt adjusters have been worked out considering different pin configuration for the adjuster assembly. To start with we have assumed all adjusters throughout its length are of the same configuration. The flux depression factors within the cobalt pencils have been considered in the estimations of the specific and total cobalt 60 activities. The option of using graded cobalt adjusters, where different pin configuration along the length is considered for better flux flattening

  20. Psychological Adjustment of Siblings to a Child with Diabetes.

    Science.gov (United States)

    Hollidge, Colin

    2001-01-01

    Examines the psychological adjustment of well child siblings living with siblings with diabetes. Psychological adjustment was assessed by measuring self-concept; behavioral difficulties; competence; anxiety; and depression on standardized tests. The well siblings demonstrated significant internal psychological stressors and maintained high levels…

  1. 42 CFR 412.322 - Indirect medical education adjustment factor.

    Science.gov (United States)

    2010-10-01

    ... Payment System for Inpatient Hospital Capital Costs Basic Methodology for Determining the Federal Rate for Capital-Related Costs § 412.322 Indirect medical education adjustment factor. (a) Basic data. CMS.... The indirect teaching adjustment factor equals [e (raised to the power of .2822×the ratio of residents...

  2. Ninth Grade Adjustment and Achievement as Related to Mobility.

    Science.gov (United States)

    Benson, Gerald P.; Weigel, Daniel J.

    1980-01-01

    School records of 643 ninth-grade students were examined. Classroom adjustment was measured by the Classroom Behavior Inventory. Results indicated that mobility was negatively related to math achievement and adjustment. Results are discussed in relation to the peer society and the use of these data for schools. (Author/RL)

  3. Emotion Regulation Profiles, Temperament, and Adjustment Problems in Preadolescents

    Science.gov (United States)

    Zalewski, Maureen; Lengua, Liliana J.; Wilson, Anna C.; Trancik, Anika; Bazinet, Alissa

    2011-01-01

    The longitudinal relations of emotion regulation profiles to temperament and adjustment in a community sample of preadolescents (N = 196, 8-11 years at Time 1) were investigated using person-oriented latent profile analysis (LPA). Temperament, emotion regulation, and adjustment were measured at 3 different time points, with each time point…

  4. Weather Radar Adjustment Using Runoff from Urban Surfaces

    DEFF Research Database (Denmark)

    Ahm, Malte; Rasmussen, Michael Robdrup

    2017-01-01

    Weather radar data used for urban drainage applications are traditionally adjusted to point ground references, e.g., rain gauges. However, the available rain gauge density for the adjustment is often low, which may lead to significant representativeness errors. Yet, in many urban catchments, rain...

  5. 5 CFR 534.504 - Annual adjustment in pay.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Annual adjustment in pay. 534.504 Section 534.504 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PAY UNDER OTHER SYSTEMS Pay for Senior-Level and Scientific and Professional Positions § 534.504 Annual adjustment...

  6. Mental Health and Adjustment of Higher Secondary School Students

    Science.gov (United States)

    Murugan, P. Vel

    2017-01-01

    The main objective of this study is to find out the relationship between mental health and adjustment of higher secondary school students. Mental Health Scale developed by Sakthimani (2010) and Adjustment Inventory developed by A.K.P. Sinha and R.P. Singh (2007) were used to collect the relevant data. The sample consists of 103 higher secondary…

  7. 26 CFR 1.996-5 - Adjustment to basis.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 10 2010-04-01 2010-04-01 false Adjustment to basis. 1.996-5 Section 1.996-5 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Domestic International Sales Corporations § 1.996-5 Adjustment to basis. (a) Addition to...

  8. Relationship between Parenting Styles and Marital Adjustment of ...

    African Journals Online (AJOL)

    The data obtained from these instruments were subjected to multiple regression analysis using SPSS and the results showed that there was a low, positive and significant relationship between authoritative parenting style and marital adjustment. The relationship between authoritarian parenting style and marital adjustment ...

  9. The Unified Levelling Network of Sarawak and its Adjustment

    Science.gov (United States)

    Som, Z. A. M.; Yazid, A. M.; Ming, T. K.; Yazid, N. M.

    2016-09-01

    The height reference network of Sarawak has seen major improvement in over the past two decades. The most significant improvement was the establishment of extended precise leveling network of which is now able to connect all three major datum points at Pulau Lakei, Original and Bintulu. Datum by following the major accessible routes across Sarawak. This means the leveling network in Sarawak has now been inter-connected and unified. By having such a unified network leads to the possibility of having a common single least squares adjustment been performed for the first time. The least squares adjustment of this unified levelling network was attempted in order to compute the height of all Bench Marks established in the entire levelling network. The adjustment was done by using MoreFix levelling adjustment package developed at FGHT UTM. The computational procedure adopted is linear parametric adjustment by minimum constraint. Since Sarawak has three separate datums therefore three separate adjustments were implemented by utilizing datum at Pulau Lakei, Original Miri and Bintulu Datum respectively. Results of the MoreFix unified adjustment agreed very well with adjustment repeated using Starnet. Further the results were compared with solution given by Jupem and they are in good agreement as well. The difference in height analysed were within 10mm for the case of minimum constraint at Pulau Lakei datum and with much better agreement in the case of Original Miri Datum.

  10. 26 CFR 1.806-1 - Adjustment for certain reserves.

    Science.gov (United States)

    2010-04-01

    ... unearned premiums, however, are less than 25 percent of the net premiums written during the taxable year on such other contracts, then the adjustment shall be 3 1/4 percent of 25 percent of the net premiums... 26 Internal Revenue 8 2010-04-01 2010-04-01 false Adjustment for certain reserves. 1.806-1 Section...

  11. 77 FR 20656 - Postal Service Classification and Price Adjustments

    Science.gov (United States)

    2012-04-05

    ... and Price Adjustments AGENCY: Postal Regulatory Commission. ACTION: Notice. SUMMARY: The Commission is... implement Picture Permit Imprint Indicia as price categories for First-Class Mail and Standard Mail letters and cards pursuant to 39 U.S.C. 3622 and 39 CFR 3010.\\1\\ The classification and price adjustment will...

  12. 75 FR 63437 - Trade Adjustment Assistance for Farmers

    Science.gov (United States)

    2010-10-15

    ... DEPARTMENT OF AGRICULTURE Foreign Agricultural Service Trade Adjustment Assistance for Farmers... Service and reviewed by the TAA for Farmers Program Review Committee, comprised of representatives from... assistance in FY 2011. FOR FURTHER INFORMATION CONTACT: Trade Adjustment Assistance for Farmers Program Staff...

  13. 75 FR 59683 - Trade Adjustment Assistance for Farmers

    Science.gov (United States)

    2010-09-28

    ... DEPARTMENT OF AGRICULTURE Foreign Agricultural Service Trade Adjustment Assistance for Farmers... Adjustment Assistance for Farmers Program Review Committee, comprised of representatives from USDA's Office... for Farmers Program Staff, Office of Trade Programs, FAS, USDA; or by phone at (202) 720-0638, or (202...

  14. 75 FR 43485 - Trade Adjustment Assistance for Farmers

    Science.gov (United States)

    2010-07-26

    ... Service Trade Adjustment Assistance for Farmers AGENCY: Foreign Agricultural Service, USDA. ACTION: Notice... cash benefits. FOR FURTHER INFORMATION CONTACT: Trade Adjustment Assistance for Farmers Staff, FAS... visit the TAA for Farmers' Web site: http://www.fas.usda.gov/itp/taa . Dated: July 14, 2010. John D...

  15. 75 FR 48931 - Trade Adjustment Assistance for Farmers

    Science.gov (United States)

    2010-08-12

    ... DEPARTMENT OF AGRICULTURE Foreign Agricultural Service Trade Adjustment Assistance for Farmers... assistance and cash benefits. FOR FURTHER INFORMATION CONTACT: Trade Adjustment Assistance for Farmers....usda.gov ; or visit the TAA for Farmers' Web site: www.fas.usda.gov/itp/taa . Dated: July 30, 2010...

  16. 75 FR 48642 - Trade Adjustment Assistance for Farmers

    Science.gov (United States)

    2010-08-11

    ... DEPARTMENT OF AGRICULTURE Foreign Agricultural Service Trade Adjustment Assistance for Farmers... benefits. FOR FURTHER INFORMATION CONTACT: Trade Adjustment Assistance for Farmers Program Staff, FAS, USDA... the TAA for Farmers' Web site: http://www.fas.usda.gov/itp/taa . Dated: July 30, 2010. John D. Brewer...

  17. 75 FR 49458 - Trade Adjustment Assistance for Farmers

    Science.gov (United States)

    2010-08-13

    ... DEPARTMENT OF AGRICULTURE Foreign Agricultural Service Trade Adjustment Assistance for Farmers... and cash benefits. FOR FURTHER INFORMATION CONTACT: Trade Adjustment Assistance for Farmers Program....gov ; or visit the TAA for Farmers' Web site: http://www.fas.usda.gov/itp/taa . Dated: August 3, 2010...

  18. 75 FR 11513 - Trade Adjustment Assistance for Farmers

    Science.gov (United States)

    2010-03-11

    ... DEPARTMENT OF AGRICULTURE Foreign Agricultural Service Trade Adjustment Assistance for Farmers... Service (FAS), will begin accepting Trade Adjustment Assistance (TAA) for Farmers petitions for fiscal... received by the TAA for Farmers Staff by close of business April 14, 2010. The petition must be sent in...

  19. 75 FR 51978 - Trade Adjustment Assistance for Farmers

    Science.gov (United States)

    2010-08-24

    ... DEPARTMENT OF AGRICULTURE Foreign Agricultural Service Trade Adjustment Assistance for Farmers... CONTACT: Trade Adjustment Assistance for Farmers Program Staff, FAS, USDA by phone: (202) 720-0638 or (202) 690- 0633: or by e-mail at: [email protected] ; or visit the TAA for Farmers' Web site...

  20. 75 FR 28780 - Trade Adjustment Assistance for Farmers

    Science.gov (United States)

    2010-05-24

    ... DEPARTMENT OF AGRICULTURE Foreign Agricultural Service Trade Adjustment Assistance for Farmers... Service (FAS) will begin accepting Trade Adjustment Assistance (TAA) for Farmers petitions for Fiscal Year... TAA for Farmers Program as established by Subtitle C of Title I of the Trade Act of 2002 (Pub. L. 107...

  1. 75 FR 49886 - Trade Adjustment Assistance for Farmers

    Science.gov (United States)

    2010-08-16

    ... DEPARTMENT OF AGRICULTURE Foreign Agricultural Service Trade Adjustment Assistance for Farmers... INFORMATION CONTACT: Trade Adjustment Assistance for Farmers Program Staff, FAS, USDA by phone: (202) 720-0638... for Farmers' Web site: http://www.fas.usda.gov/itp/taa . Dated: August 3, 2010. Suzanne Hale, Acting...

  2. 75 FR 42375 - Trade Adjustment Assistance for Farmers

    Science.gov (United States)

    2010-07-21

    ... DEPARTMENT OF AGRICULTURE Foreign Agricultural Service Trade Adjustment Assistance for Farmers... INFORMATION CONTACT: Trade Adjustment Assistance for Farmers Staff, FAS, USDA, by phone: (202) 720-0638, or (202) 690-0633; or by e-mail: [email protected] ; or visit the TAA for Farmers' Web site...

  3. 75 FR 23226 - Trade Adjustment Assistance for Farmers

    Science.gov (United States)

    2010-05-03

    ... DEPARTMENT OF AGRICULTURE Foreign Agricultural Service Trade Adjustment Assistance for Farmers AGENCY: Foreign Agricultural Service, USDA. ACTION: Notice. The Administrator, Foreign Agricultural... Web site for the Trade Adjustment Assistance for Farmers program. The URL is http://www.fas.usda.gov...

  4. 7 CFR 4287.112 - Interest rate adjustments.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Interest rate adjustments. 4287.112 Section 4287.112... Loans § 4287.112 Interest rate adjustments. (a) Reductions. The borrower, lender, and holder (if any) may collectively initiate a permanent or temporary reduction in the interest rate of the guaranteed...

  5. 75 FR 35877 - Quarterly Rail Cost Adjustment Factor

    Science.gov (United States)

    2010-06-23

    ... available on our Web site, http://www.stb.dot.gov . Copies of the decision may be purchased by contacting...-3)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the third quarter 2010 rail cost...

  6. 77 FR 76169 - Quarterly Rail Cost Adjustment Factor

    Science.gov (United States)

    2012-12-26

    ....stb.dot.gov . Copies of the decision may be purchased by contacting the Office of Public Assistance...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board, DOT. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the AAR's proposed rebasing calculations and...

  7. 75 FR 17462 - Quarterly Rail Cost Adjustment Factor

    Science.gov (United States)

    2010-04-06

    ... decision may be purchased by contacting the office of Public Assistance, Governmental Affairs, and...-2)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board. ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the second quarter 2010 Rail Cost...

  8. 75 FR 5170 - Railroad Cost Recovery Procedures-Productivity Adjustment

    Science.gov (United States)

    2010-02-01

    ...)] Railroad Cost Recovery Procedures--Productivity Adjustment AGENCY: Surface Transportation Board, DOT. ACTION: Proposed Railroad Cost Recovery Procedures Productivity Adjustment. SUMMARY: In a decision served... railroad productivity for the 2004-2008 (5-year) averaging period. This is a decline of 0.5 of a percentage...

  9. 77 FR 7237 - Railroad Cost Recovery Procedures-Productivity Adjustment

    Science.gov (United States)

    2012-02-10

    ... Cost Recovery Procedures--Productivity Adjustment AGENCY: Surface Transportation Board. ACTION: Proposed railroad cost recovery procedures productivity adjustment. SUMMARY: In a decision served on... productivity for the 2006-2010 (5-year) averaging period. This represents a 0.6% decrease over the average for...

  10. 78 FR 10262 - Railroad Cost Recovery Procedures-Productivity Adjustment

    Science.gov (United States)

    2013-02-13

    ... Cost Recovery Procedures--Productivity Adjustment AGENCY: Surface Transportation Board, DOT. ACTION: Proposed railroad cost recovery procedures productivity adjustment. SUMMARY: In a decision served on... productivity for the 2007-2011 (5-year) averaging period. This represents a 0.1% increase over the average for...

  11. The Impact of Macro-adjustment Programmes on Housing ...

    African Journals Online (AJOL)

    The Impact of Macro-adjustment Programmes on Housing Investment in Kampala City, Uganda: Shelter Implications for the Urban Poor. ... Eastern Africa Social Science Research Review ... The adjustment methodology has side-lined and gravely undermined the housing sector thereby aggravating the shelter problem.

  12. THE UNIFIED LEVELLING NETWORK OF SARAWAK AND ITS ADJUSTMENT

    Directory of Open Access Journals (Sweden)

    Z. A. M. Som

    2016-09-01

    Full Text Available The height reference network of Sarawak has seen major improvement in over the past two decades. The most significant improvement was the establishment of extended precise leveling network of which is now able to connect all three major datum points at Pulau Lakei, Original and Bintulu. Datum by following the major accessible routes across Sarawak. This means the leveling network in Sarawak has now been inter-connected and unified. By having such a unified network leads to the possibility of having a common single least squares adjustment been performed for the first time. The least squares adjustment of this unified levelling network was attempted in order to compute the height of all Bench Marks established in the entire levelling network. The adjustment was done by using MoreFix levelling adjustment package developed at FGHT UTM. The computational procedure adopted is linear parametric adjustment by minimum constraint. Since Sarawak has three separate datums therefore three separate adjustments were implemented by utilizing datum at Pulau Lakei, Original Miri and Bintulu Datum respectively. Results of the MoreFix unified adjustment agreed very well with adjustment repeated using Starnet. Further the results were compared with solution given by Jupem and they are in good agreement as well. The difference in height analysed were within 10mm for the case of minimum constraint at Pulau Lakei datum and with much better agreement in the case of Original Miri Datum.

  13. 47 CFR 1.1163 - Adjustments to regulatory fees.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false Adjustments to regulatory fees. 1.1163 Section... of Statutory Charges and Procedures for Payment § 1.1163 Adjustments to regulatory fees. (a) For Fiscal Year 1995, the amounts assessed for regulatory fees are set forth in §§ 1.1152 through 1.1156. (b...

  14. Adjustment of High School Dropouts in Closed Religious Communities

    Science.gov (United States)

    Itzhaki, Yael; Itzhaky, Haya; Yablon, Yaacov B.

    2018-01-01

    Background: While extensive research has been done on high-school dropouts' adjustment, there is little data on dropouts from closed religious communities. Objective: This study examines the contribution of personal and social resources to the adjustment of high school dropouts in Ultraorthodox Jewish communities in Israel. Method: Using a…

  15. 21 CFR 1303.13 - Adjustments of aggregate production quotas.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 9 2010-04-01 2010-04-01 false Adjustments of aggregate production quotas. 1303.13 Section 1303.13 Food and Drugs DRUG ENFORCEMENT ADMINISTRATION, DEPARTMENT OF JUSTICE QUOTAS Aggregate Production and Procurement Quotas § 1303.13 Adjustments of aggregate production quotas. (a) The...

  16. 8 CFR 280.53 - Civil monetary penalties inflation adjustment.

    Science.gov (United States)

    2010-01-01

    ... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Civil monetary penalties inflation... REGULATIONS IMPOSITION AND COLLECTION OF FINES § 280.53 Civil monetary penalties inflation adjustment. (a) In general. In accordance with the requirements of the Federal Civil Penalties Inflation Adjustment Act of...

  17. 8 CFR 1280.53 - Civil monetary penalties inflation adjustment.

    Science.gov (United States)

    2010-01-01

    ... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Civil monetary penalties inflation... penalties inflation adjustment. (a) In general. In accordance with the requirements of the Federal Civil Penalties Inflation Adjustment Act of 1990, Pub. L. 101-410, 104 Stat. 890, as amended by the Debt...

  18. Influence of Solo and Double Parenting on the Adjustment Problems ...

    African Journals Online (AJOL)

    This study investigated the influence of solo and double parenting on the adjustment problems of secondary school adolescents. Adolescents\\' adjustment problems were studied under four groups. These include social, family, personal and academic categories. The sample for the study consisted of 630 adolescents made ...

  19. 31 CFR 29.345 - Cost-of-living adjustments.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Cost-of-living adjustments. 29.345 Section 29.345 Money and Finance: Treasury Office of the Secretary of the Treasury FEDERAL BENEFIT... Federal Benefit Payments § 29.345 Cost-of-living adjustments. Cost-of-living increases are applied...

  20. 37 CFR 253.10 - Cost of living adjustment.

    Science.gov (United States)

    2010-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Cost of living adjustment... NONCOMMERCIAL EDUCATIONAL BROADCASTING § 253.10 Cost of living adjustment. (a) (a) On December 1, 2003, the Librarian of Congress shall publish in the Federal Register a notice of the change in the cost of living as...

  1. 5 CFR 838.241 - Cost-of-living adjustments.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Cost-of-living adjustments. 838.241... Affecting Employee Annuities Procedures for Computing the Amount Payable § 838.241 Cost-of-living... provide for cost-of-living adjustments on the former spouse's payment from employee annuity, the cost-of...

  2. 37 CFR 381.10 - Cost of living adjustment.

    Science.gov (United States)

    2010-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Cost of living adjustment... EDUCATIONAL BROADCASTING § 381.10 Cost of living adjustment. (a) On or before December 1, 2007, the Copyright Royalty Judges shall publish in the Federal Register a notice of the change in the cost of living as...

  3. 5 CFR 838.1017 - Cost-of-living adjustments.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Cost-of-living adjustments. 838.1017... Retirement Benefits § 838.1017 Cost-of-living adjustments. In cases where the court order apportions a... proper payment. That amount will be increased by future cost-of-living increases unless the court directs...

  4. Combining Marriage and Career: The Professional Adjustment of Marital Teachers

    Science.gov (United States)

    Rizvi, Afroz Haider

    2016-01-01

    In the paper, the researcher attempted to assess Professional Adjustment status and level of teachers according to their marital status on a sample of 792 teachers. Teachers have been classified into two categories viz. married and unmarried. To evaluate the status of professional adjustment of teachers, a tool viz. "Manual on Teachers…

  5. Competition Leverage : How the Demand Side Affects Optimal Risk Adjustment

    NARCIS (Netherlands)

    Bijlsma, M.; Boone, J.; Zwart, Gijsbert

    2011-01-01

    We study optimal risk adjustment in imperfectly competitive health insurance markets when high-risk consumers are less likely to switch insurer than low-risk consumers. First, we find that insurers still have an incentive to select even if risk adjustment perfectly corrects for cost differences

  6. Diffeomorphic image registration with automatic time-step adjustment

    DEFF Research Database (Denmark)

    Pai, Akshay Sadananda Uppinakudru; Klein, S.; Sommer, Stefan Horst

    2015-01-01

    In this paper, we propose an automated Euler's time-step adjustment scheme for diffeomorphic image registration using stationary velocity fields (SVFs). The proposed variational problem aims at bounding the inverse consistency error by adaptively adjusting the number of Euler's step required to r...... accuracy as a fixed time-step scheme however at a much less computational cost....

  7. Parental Perceptions of Family Adjustment in Childhood Developmental Disabilities

    Science.gov (United States)

    Thompson, Sandra; Hiebert-Murphy, Diane; Trute, Barry

    2013-01-01

    Based on the adjustment phase of the double ABC-X model of family stress (McCubbin and Patterson, 1983) this study examined the impact of parenting stress, positive appraisal of the impact of child disability on the family, and parental self-esteem on parental perceptions of family adjustment in families of children with disabilities. For mothers,…

  8. 47 CFR 61.46 - Adjustments to the API.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 3 2010-10-01 2010-10-01 false Adjustments to the API. 61.46 Section 61.46... Rules for Dominant Carriers § 61.46 Adjustments to the API. (a) Except as provided in paragraphs (d) and... carrier must calculate an API for each affected basket pursuant to the following methodology: APIt = APIt...

  9. 37 CFR 1.705 - Patent term adjustment determination.

    Science.gov (United States)

    2010-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Patent term adjustment determination. 1.705 Section 1.705 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE GENERAL RULES OF PRACTICE IN PATENT CASES Adjustment and Extension of Patent Term...

  10. Gender Identity and Adjustment in Black, Hispanic, and White Preadolescents

    Science.gov (United States)

    Corby, Brooke C.; Hodges, Ernest V. E.; Perry, David G.

    2007-01-01

    The generality of S. K. Egan and D. G. Perry's (2001) model of gender identity and adjustment was evaluated by examining associations between gender identity (felt gender typicality, felt gender contentedness, and felt pressure for gender conformity) and social adjustment in 863 White, Black, and Hispanic 5th graders (mean age = 11.1 years).…

  11. The Effect of Family Communication Patterns on Adopted Adolescent Adjustment

    Science.gov (United States)

    Rueter, Martha A.; Koerner, Ascan F.

    2008-01-01

    Adoption and family communication both affect adolescent adjustment. We proposed that adoption status and family communication interact such that adopted adolescents in families with certain communication patterns are at greater risk for adjustment problems. We tested this hypothesis using a community-based sample of 384 adoptive and 208…

  12. Positive Adjustment in Parents Rearing Children with Down Syndrome.

    Science.gov (United States)

    Flaherty, Evelyn M.; Glidden, Laraine Masters

    2000-01-01

    Compared adjustment in adoptive and biological parents rearing 1- to 12-year-olds with Down syndrome. Found that birth mothers and fathers were functioning quite similarly to adoptive mothers and fathers on family strengths, marital adjustment, and resources and stress. Birth mothers displayed higher personal burden than adoptive mothers, with the…

  13. 5 CFR 831.702 - Adjustment of annuities.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Adjustment of annuities. 831.702 Section... (CONTINUED) RETIREMENT Computation of Annuities § 831.702 Adjustment of annuities. (a)(1) An annuity which... benefit shall require a corresponding deduction in the civil service annuity. (3) Any cost-of-living...

  14. 50 CFR 648.77 - Framework adjustments to management measures.

    Science.gov (United States)

    2010-10-01

    ... Management Measures for the Atlantic Surf Clam and Ocean Quahog Fisheries § 648.77 Framework adjustments to... add or adjust management measures within the Atlantic Surf Clam and Ocean Quahog FMP if it finds that... stratification, reports, and/or industry-funded observers or observer set-aside programs). (2) Council...

  15. New schemes in the adjustment of bendable, elliptical mirrors using a long trace profiler

    International Nuclear Information System (INIS)

    Rah, S.

    1997-08-01

    The Long Trace Profiler (LTP), an instrument for measuring the slope profile of long X-ray mirrors, has been used for adjusting bendable mirrors. Often an elliptical profile is desired for the mirror surface, since many synchrotron applications involve imaging a point source to a point image. Several techniques have been used in the past for adjusting the profile measured in height or slope of a bendable mirror. Underwood et al. have used collimated X-rays for achieving desired surface shape for bent glass optics. Non linear curve fitting using the simplex algorithm was later used to determine the best fit ellipse to the surface under test. A more recent method uses a combination of least squares polynomial fitting to the measured slope function in order to enable rapid adjustment to the desired shape. The mirror has mechanical adjustments corresponding to the first and second order terms of the desired slope polynomial, which correspond to defocus and coma, respectively. The higher order terms are realized by shaping the width of the mirror to produce the optimal elliptical surface when bent. The difference between desired and measured surface slope profiles allows us to make methodical adjustments to the bendable mirror based on changes in the signs and magnitudes of the polynomial coefficients. This technique gives rapid convergence to the desired shape of the measured surface, even when we have no information about the bender, other than the desired shape of the optical surface. Nonlinear curve fitting can be used at the end of the process for fine adjustments, and to determine the over all best fit parameters of the surface. This technique could be generalized to other shapes such as toroids

  16. Covariate-adjusted measures of discrimination for survival data

    DEFF Research Database (Denmark)

    White, Ian R; Rapsomaniki, Eleni; Frikke-Schmidt, Ruth

    2015-01-01

    by the study design (e.g. age and sex) influence discrimination and can make it difficult to compare model discrimination between studies. Although covariate adjustment is a standard procedure for quantifying disease-risk factor associations, there are no covariate adjustment methods for discrimination...... statistics in censored survival data. OBJECTIVE: To develop extensions of the C-index and D-index that describe the prognostic ability of a model adjusted for one or more covariate(s). METHOD: We define a covariate-adjusted C-index and D-index for censored survival data, propose several estimators......, and investigate their performance in simulation studies and in data from a large individual participant data meta-analysis, the Emerging Risk Factors Collaboration. RESULTS: The proposed methods perform well in simulations. In the Emerging Risk Factors Collaboration data, the age-adjusted C-index and D-index were...

  17. Self-Esteem, Coping Efforts and Marital Adjustment

    Directory of Open Access Journals (Sweden)

    Claude Bélanger

    2014-11-01

    Full Text Available The main objective of this study is to investigate the relationship between self-esteem, specific coping strategies and marital adjustment. The sample consists of 216 subjects from 108 couples who completed the Dyadic Adjustment Scale, the Rosenberg Self-Esteem Scale and the Ways of Coping Checklist. The results confirm the presence of a relationship between self-esteem, specific coping strategies and marital adjustment in men and women. High self-esteem and marital adjustment are associated with the use of problem solving strategies and less avoidance as a way of coping. Moreover, cross analyses reveal that one’s feelings of self-worth are associated with his/her spouse's marital adjustment. The theoretical implications of these results are discussed.

  18. Russian financial sector: adjustment and management

    Directory of Open Access Journals (Sweden)

    Vitaly J. Ozira

    2006-12-01

    Full Text Available This paper reviews general issues relate to Russian financial system and policies in the context of economies relying to a significan extent on market mechanisms to allocate resources. After a brief introduction describing the functions of the financial sector in a marke economy, the paper presents an inventory o the most common problems hindering the effective performance of the financial system as a development tool, and some policy guideline based on the analysis. The text aims a presenting a brief exposition of the basic principles that provide a conceptual framework to review the issues.Finance, like money, is not a realit which exists independently from the specific cultural, political and legal features of a given society. The reason is that finance is ai institution, which organizes relevant modes o interaction among various groups or individual economic units claims on the social resources, the functions fulfilled by the financial sector need not be the universal.The views expressed in the paper are the author's own responsibility and should not be interpreted as presenting the official position paper on financial sector management.El presente artículo examina problemas generales concernientes al sector financiero de Rusia a la luz del sistema económico apoyado en los mecanismos de mercado de la distribución de los recursos. Después de la introducción que describe las funciones de dicho sector en las condiciones de mercado, el artículo representa un cuadro típico de problemas que frenan el funcionamiento eficaz del sistema financiero como instrumento de desarrollo. Asimismo el autor ofrece recomendaciones prácticas basadas en el resultado del análisis llevado a cabo por él. El texto del artículo contiene los principios fundamentales que son, propiamente dicho, los marcos conceptuales del presente trabajo.Las finanzas, como es sabido, están estrechamente vinculadas a las peculiaridades jurídicas, políticas y culturales de

  19. Mechanical drawing

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Ho Seon; Lee, Geun Hui

    2004-04-15

    This book deals with how to read and draw the mechanical drawing, which includes the basic of drawing like purpose, kinds, and criterion, projection, special projection drawing, omission of the figure, section, and types of section, dimensioning method, writing way of allowable limit size, tolerance of regular size, parts list and assembling drawing, fitting, mechanical elements like screw, key, pin, rivet, spring, bearing, pipe, valve, welding, geometric tolerance and mechanical materials.

  20. Classical mechanics

    CERN Document Server

    Benacquista, Matthew J

    2018-01-01

    This textbook provides an introduction to classical mechanics at a level intermediate between the typical undergraduate and advanced graduate level. This text describes the background and tools for use in the fields of modern physics, such as quantum mechanics, astrophysics, particle physics, and relativity. Students who have had basic undergraduate classical mechanics or who have a good understanding of the mathematical methods of physics will benefit from this book.

  1. Mechanical science

    CERN Document Server

    Bolton, W C

    2013-01-01

    This book gives comprehensive coverage of mechanical science for HNC/HND students taking mechanical engineering courses, including all topics likely to be covered in both years of such courses, as well as for first year undergraduate courses in mechanical engineering. It features 500 problems with answers and 200 worked examples. The third edition includes a new section on power transmission and an appendix on mathematics to help students with the basic notation of calculus and solution of differential equations.

  2. Continuum Mechanics

    CERN Document Server

    Romano, Antonio

    2010-01-01

    This book offers a broad overview of the potential of continuum mechanics to describe a wide range of macroscopic phenomena in real-world problems. Building on the fundamentals presented in the authors' previous book, Continuum Mechanics using Mathematica(R), this new work explores interesting models of continuum mechanics, with an emphasis on exploring the flexibility of their applications in a wide variety of fields.Specific topics, which have been chosen to show the power of continuum mechanics to characterize the experimental behavior of real phenomena, include: * various aspects of nonlin

  3. Precision tool holder with flexure-adjustable, three degrees of freedom for a four-axis lathe

    Science.gov (United States)

    Bono, Matthew J [Pleasanton, CA; Hibbard, Robin L [Livermore, CA

    2008-03-04

    A precision tool holder for precisely positioning a single point cutting tool on 4-axis lathe, such that the center of the radius of the tool nose is aligned with the B-axis of the machine tool, so as to facilitate the machining of precision meso-scale components with complex three-dimensional shapes with sub-.mu.m accuracy on a four-axis lathe. The device is designed to fit on a commercial diamond turning machine and can adjust the cutting tool position in three orthogonal directions with sub-micrometer resolution. In particular, the tool holder adjusts the tool position using three flexure-based mechanisms, with two flexure mechanisms adjusting the lateral position of the tool to align the tool with the B-axis, and a third flexure mechanism adjusting the height of the tool. Preferably, the flexures are driven by manual micrometer adjusters. In this manner, this tool holder simplifies the process of setting a tool with sub-.mu.m accuracy, to substantially reduce the time required to set the tool.

  4. Validation of the Parenting and Family Adjustment Scales to Measure Parenting Skills and Family Adjustment in Chinese Parents

    Science.gov (United States)

    Guo, Mingchun; Morawska, Alina; Filus, Ania

    2017-01-01

    This study validated a parent-report measure of the Parenting and Family Adjustment Scales in a Chinese cultural context through investigating 650 Chinese parents. The results provided evidence for satisfactory reliability and validity of Parenting and Family Adjustment Scales in a Chinese context, which is thus promising to be used for Chinese…

  5. 25 CFR 39.145 - Can a school receive both a small school adjustment and a small high school adjustment?

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Can a school receive both a small school adjustment and a small high school adjustment? 39.145 Section 39.145 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION THE INDIAN SCHOOL EQUALIZATION PROGRAM Indian School Equalization Formula Small School...

  6. 75 FR 4578 - Notice of Adjustment of Statewide Per Capita Threshold for Recommending a Cost Share Adjustment

    Science.gov (United States)

    2010-01-28

    ... Robert T. Stafford Disaster Relief and Emergency Assistance Act is adjusted annually. The adjustment to... Management Assistance Grant; 97.048, Disaster Housing Assistance to Individuals and Households In Presidentially Declared Disaster Areas; 97.049, Presidentially Declared Disaster Assistance--Disaster Housing...

  7. Analysis and experimental investigation for collimator reflective mirror surface deformation adjustment

    Directory of Open Access Journals (Sweden)

    Chia-Yen Chan

    2017-01-01

    Full Text Available Collimator design is essential for meeting the requirements of high-precision telescopes. The collimator diameter should be larger than that of the target for alignment. Special supporting structures are required to reduce the gravitational deformation and control the surface deformation induced by the mounting force when inspecting large-aperture primary mirrors (M1. A ZERODURÂŽ mirror 620 mm in diameter for a collimator was analyzed using the finite element method to obtain the deformation induced by the supporting structures and adjustment mechanism. Zernike polynomials were also adopted to fit the optical surface and separate corresponding aberrations. The computed and measured wavefront aberration configurations for the collimator M1 were obtained complementally. The wavefront aberrations were adjusted using fine adjustment screws using 3D optical path differences map of the mirror surface. Through studies using different boundary conditions and inner ring support positions, it is concluded that the optical performance was excellent under a strong enough supporter. The best adjustment position was attained and applied to the actual collimator M1 to prove the correctness of the simulation results.

  8. A study on the aerodynamic characteristics of airfoil in the flapping adjustment stage during forward flight

    Science.gov (United States)

    Luo, Pan; Zhang, Xingwei; Huang, Panpan; Xie, Lingwang

    2017-10-01

    The aim of this study is to investigate the aerodynamic characteristics of a flapping airfoil in the adjustment stage between two specific flight patterns during the forward flight. Four flapping movement models in adjustment stage are firstly established by using the multi-objective optimization algorithm. Then, a numerical experiment is carried out by using finite volume method to solve the two-dimensional time-dependent incompressible Navier-Stokes equations. The attack angles are selected from -5° to 7.5° with an increase of 2.5°. The results are systematically analyzed and special attention is paid to the corresponding changes of aerodynamic forces, vortex shedding mechanism in the wake structure and thrust efficiency. Present results show that output aerodynamic performance of flapping airfoil can be improved by the increasement of amplitude and frequency in the flapping adjustment stage, which further validates and complements previous studies. Moreover, it is also show that the manner using multi-objective optimization algorithm to generate a movement model in adjustment stage, to connect other two specific plunging motions, is a feasible and effective method. Current study is dedicated to providing some helpful references for the design and control of artificial flapping wing air vehicles.

  9. Newcomer adjustment: Examining the role of managers' perception of newcomer proactive behavior during organizational socialization.

    Science.gov (United States)

    Ellis, Allison M; Nifadkar, Sushil S; Bauer, Talya N; Erdogan, Berrin

    2017-06-01

    Separate streams of organizational socialization research have recognized the importance of (a) newcomer proactivity and (b) manager support in facilitating newcomer adjustment. However, extant research has largely focused on the newcomers' experience, leaving the perspectives of managers during socialization relatively unexplored-a theoretical gap that has implications both for newcomer adjustment and manager-newcomer interactions that may serve as a basis for future relationship development. Drawing from the "interlocked" employee behavior argument of Weick (1979), we propose that managers' perception of newcomers' proactive behaviors are associated with concordant manager behaviors, which, in turn, support newcomer adjustment. Further, we investigate a cognitive mechanism-managers' evaluation of newcomers' commitment to adjust-which we expect underlies the proposed relationship between newcomers' proactive behaviors and managers' supportive behaviors. Using a time-lagged, 4-phase data collection of a sample of new software engineers in India and their managers, we were able to test our hypothesized model as well as rule out alternative explanations via multilevel structural equation modeling. Results broadly supported our model even after controlling for manager-newcomer social exchange relationship, proactive personalities of both newcomers and managers, and potential effects of coworker information providing. The implications of our findings for theory and practice are discussed. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  10. Effects of parent drug use and personality on toddler adjustment.

    Science.gov (United States)

    Brook, J S; Whiteman, M; Shapiro, J; Cohen, P

    1996-03-01

    The interrelation between parental drug use and parental personality and the effects on 18-month-old children's adjustment were examined. Data on the parents were available at four points in time: Time 1 at mean age 6.1 years, Time 2 at mean age 13.7 years, Time 3 at mean age 16.4 years, and at Time 4 at mean age 22.2 years. Data on their toddlers at 18 months of age were also available. Structured interviews were used to assess personality and drug use and the toddlers' adjustment. Time 3 parental personality traits were related to Time 4 personality traits, which in turn were related to toddler adjustment. The influence of parental alcohol involvement (Time 3) on toddler adjustment was mediated by parental personality (Times 3 and 4) and parental alcohol problems (Time 4). Interactive effects demonstrated that protective parental personality traits (nondrug conducive) enhanced the effects of low parental drug use, resulting in the highest amounts of toddler adjustment. There are significant pathways between parental personality and drug use and toddler adjustment. Parental protective factors enhance the effect of parental low drug use on toddler adjustment.

  11. Longitudinal Psychosocial Adjustment of Women to Human Papillomavirus Infection.

    Science.gov (United States)

    Hsu, Yu-Yun; Wang, Wei-Ming; Fetzer, Susan Jane; Cheng, Ya-Min; Hsu, Keng-Fu

    2018-05-29

    The aim of this study was to examine the psychosocial adjustment trajectory, focusing on psychological distress, sexual relationships and health care information, as well as factors which have an impact on adjustment on receiving a positive diagnosis of human papillomavirus infection. Human papillomavirus is a common sexually transmitted infection in females. To date, knowledge of the longitudinal psychosocial response to the diagnosis of human papillomavirus is limited. A prospective longitudinal design was conducted with a convenience sample. Women aged 20-65 years old were followed at one, 6 and 12 months after a diagnosis of HPV. Participants completed measures of initial emotional distress and followed-up psychosocial adjustment. A mixed-effects model was applied to analyze the longitudinal changes in psychosocial adjustment. Seventy human papillomavirus positive women participated in the study with nearly 20% of the women reporting emotional distress during their first visit. Mixed-effects model analyses showed that a trajectory of psychosocial adjustment in health care orientation, sexual relationship and psychosocial distress occur from one to 6 months after HPV diagnosis. However, a declining trend from 6-12 months was significant in health care orientation. Initial emotional distress was associated with changes in psychological adjustment. Psychosocial adjustment to human papillomavirus was worse at one month compared with 6 and 12 months after diagnosis. Healthcare providers should offer health information and psychosocial support to women according to their disease progression. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

  12. Direct comparison of risk-adjusted and non-risk-adjusted CUSUM analyses of coronary artery bypass surgery outcomes.

    Science.gov (United States)

    Novick, Richard J; Fox, Stephanie A; Stitt, Larry W; Forbes, Thomas L; Steiner, Stefan

    2006-08-01

    We previously applied non-risk-adjusted cumulative sum methods to analyze coronary bypass outcomes. The objective of this study was to assess the incremental advantage of risk-adjusted cumulative sum methods in this setting. Prospective data were collected in 793 consecutive patients who underwent coronary bypass grafting performed by a single surgeon during a period of 5 years. The composite occurrence of an "adverse outcome" included mortality or any of 10 major complications. An institutional logistic regression model for adverse outcome was developed by using 2608 contemporaneous patients undergoing coronary bypass. The predicted risk of adverse outcome in each of the surgeon's 793 patients was then calculated. A risk-adjusted cumulative sum curve was then generated after specifying control limits and odds ratio. This risk-adjusted curve was compared with the non-risk-adjusted cumulative sum curve, and the clinical significance of this difference was assessed. The surgeon's adverse outcome rate was 96 of 793 (12.1%) versus 270 of 1815 (14.9%) for all the other institution's surgeons combined (P = .06). The non-risk-adjusted curve reached below the lower control limit, signifying excellent outcomes between cases 164 and 313, 323 and 407, and 667 and 793, but transgressed the upper limit between cases 461 and 478. The risk-adjusted cumulative sum curve never transgressed the upper control limit, signifying that cases preceding and including 461 to 478 were at an increased predicted risk. Furthermore, if the risk-adjusted cumulative sum curve was reset to zero whenever a control limit was reached, it still signaled a decrease in adverse outcome at 166, 653, and 782 cases. Risk-adjusted cumulative sum techniques provide incremental advantages over non-risk-adjusted methods by not signaling a decrement in performance when preoperative patient risk is high.

  13. Is the distinction between adjustment disorder with depressed mood and adjustment disorder with mixed anxious and depressed mood valid?

    Science.gov (United States)

    Zimmerman, Mark; Martinez, Jennifer H; Dalrymple, Kristy; Martinez, Jennifer H; Chelminski, Iwona; Young, Diane

    2013-11-01

    In the DSM-IV, adjustment disorder is subtyped according to the predominant presenting feature. The different diagnostic code numbers assigned to each subtype suggest their significance in DSM-IV. However, little research has examined the validity of these subtypes. In the present report from the Rhode Island Methods to Improve Diagnostic Assessment and Services (MIDAS) project, we compared the demographic and clinical profiles of patients diagnosed with adjustment disorder subtypes to determine whether there was enough empirical evidence supporting the retention of multiple adjustment disorder subtypes in future versions of the DSM. A total of 3,400 psychiatric patients presenting to the Rhode Island Hospital outpatient practice were evaluated with semistructured diagnostic interviews for DSM-IV Axis I and Axis II disorders and measures of psychosocial morbidity. Approximately 7% (224 of 3,400) of patients were diagnosed with current adjustment disorder. Adjustment disorder with depressed mood and with mixed anxious and depressed mood were the most common subtypes, accounting for 80% of the patients diagnosed with adjustment disorder. There was no significant difference between these 2 groups with regard to demographic variables, current comorbid Axis I or Axis II disorders, lifetime history of major depressive disorder or anxiety disorders, psychosocial morbidity, or family history of psychiatric disorders. The only difference between the groups was lifetime history of drug use, which was significantly higher in the patients diagnosed with adjustment disorder with depressed mood. There is no evidence supporting the retention of both of these adjustment disorder subtypes, and DSM-IV previously set a precedent for eliminating adjustment disorder subtypes in the absence of any data. Therefore, in the spirit of nosologic parsimony, consideration should be given to collapsing the 2 disorders into 1: adjustment disorder with depressed mood.

  14. A mechanical breathing simulator for respirator test

    International Nuclear Information System (INIS)

    Murata, Mikio; Ikezawa, Yoshio; Yoshida, Yoshikazu

    1976-01-01

    A mechanical breathing simulator has been developed to produce the human respiration for use in respirator test. The respirations were produced through the strokes of piston controlled by a rockerarm with adjustable fulcrum. The respiration rate was governed by motor-speed control, independent of the tidal volume achieved by adjustment of the piston stroke. By the breather, the simulated respirations for work rate 0, 208, 415, 622 and 830 kg-m/min could be produced through the typical dummy head. (auth.)

  15. Automotive Mechanics.

    Science.gov (United States)

    Linder, Ralph C.; And Others

    This curriculum guide, which was validated by vocational teachers and mechanics in the field, describes the competencies needed by entry-level automotive mechanics. This guide lists 15 competencies; for each competency, various tasks with their performance objective, student learning experiences, suggested instructional techniques, instructional…

  16. Quantum mechanics

    CERN Document Server

    Rae, Alastair I M

    2016-01-01

    A Thorough Update of One of the Most Highly Regarded Textbooks on Quantum Mechanics Continuing to offer an exceptionally clear, up-to-date treatment of the subject, Quantum Mechanics, Sixth Edition explains the concepts of quantum mechanics for undergraduate students in physics and related disciplines and provides the foundation necessary for other specialized courses. This sixth edition builds on its highly praised predecessors to make the text even more accessible to a wider audience. It is now divided into five parts that separately cover broad topics suitable for any general course on quantum mechanics. New to the Sixth Edition * Three chapters that review prerequisite physics and mathematics, laying out the notation, formalism, and physical basis necessary for the rest of the book * Short descriptions of numerous applications relevant to the physics discussed, giving students a brief look at what quantum mechanics has made possible industrially and scientifically * Additional end-of-chapter problems with...

  17. Respiratory mechanics

    CERN Document Server

    Wilson, Theodore A

    2016-01-01

    This book thoroughly covers each subfield of respiratory mechanics: pulmonary mechanics, the respiratory pump, and flow. It presents the current understanding of the field and serves as a guide to the scientific literature from the golden age of respiratory mechanics, 1960 - 2010. Specific topics covered include the contributions of surface tension and tissue forces to lung recoil, the gravitational deformation of the lung, and the interdependence forces that act on pulmonary airways and blood vessels. The geometry and kinematics of the ribs is also covered in detail, as well as the respiratory action of the external and internal intercostal muscles, the mechanics of the diaphragm, and the quantitative compartmental models of the chest wall is also described. Additionally, flow in the airways is covered thoroughly, including the wave-speed and viscous expiratory flow-limiting mechanisms; convection, diffusion and the stationary front; and the distribution of ventilation. This is an ideal book for respiratory ...

  18. College mechanics

    CERN Document Server

    Şengül, Caner

    2016-01-01

    College Mechanics QueBank has been designed to be different, enthusiastic, interesting and helpful to you. Therefore, it is not just a test bank about mechanics but also it is like a compass in order to find your way in mechanics Each chapter in this book is put in an order to follow a hierarchy of the mechanics topics; from vectors to simple harmonic motion. Throughout the book there are many multiple choice and long answer questions for you to solve. They have been created for YGS, LYS, SAT, IB or other standardized exams in the world because mechanics has no boundaries and so Physics has no country. Learn the main principle of each chapter and explore the daily life applications. Then you can start to solve the questions by planning a problem solving method carefully. Finally, enjoy solving the questions and discover the meachanics of the universe once more.

  19. Fracture Mechanics

    CERN Document Server

    Zehnder, Alan T

    2012-01-01

    Fracture mechanics is a vast and growing field. This book develops the basic elements needed for both fracture research and engineering practice. The emphasis is on continuum mechanics models for energy flows and crack-tip stress- and deformation fields in elastic and elastic-plastic materials. In addition to a brief discussion of computational fracture methods, the text includes practical sections on fracture criteria, fracture toughness testing, and methods for measuring stress intensity factors and energy release rates. Class-tested at Cornell, this book is designed for students, researchers and practitioners interested in understanding and contributing to a diverse and vital field of knowledge. Alan Zehnder joined the faculty at Cornell University in 1988. Since then he has served in a number of leadership roles including Chair of the Department of Theoretical and Applied Mechanics, and Director of the Sibley School of Mechanical and Aerospace Engineering.  He teaches applied mechanics and his research t...

  20. Diagnostic Risk Adjustment for Medicaid: The Disability Payment System

    Science.gov (United States)

    Kronick, Richard; Dreyfus, Tony; Lee, Lora; Zhou, Zhiyuan

    1996-01-01

    This article describes a system of diagnostic categories that Medicaid programs can use for adjusting capitation payments to health plans that enroll people with disability. Medicaid claims from Colorado, Michigan, Missouri, New York, and Ohio are analyzed to demonstrate that the greater predictability of costs among people with disabilities makes risk adjustment more feasible than for a general population and more critical to creating health systems for people with disability. The application of our diagnostic categories to State claims data is described, including estimated effects on subsequent-year costs of various diagnoses. The challenges of implementing adjustment by diagnosis are explored. PMID:10172665

  1. Adjustable thermal resistor by reversibly folding a graphene sheet.

    Science.gov (United States)

    Song, Qichen; An, Meng; Chen, Xiandong; Peng, Zhan; Zang, Jianfeng; Yang, Nuo

    2016-08-11

    Phononic (thermal) devices such as thermal diodes, thermal transistors, thermal logic gates, and thermal memories have been studied intensively. However, tunable thermal resistors have not been demonstrated yet. Here, we propose an instantaneously adjustable thermal resistor based on folded graphene. Through theoretical analysis and molecular dynamics simulations, we study the phonon-folding scattering effect and the dependence of thermal resistivity on the length between two folds and the overall length. Furthermore, we discuss the possibility of realizing instantaneously adjustable thermal resistors in experiment. Our studies bring new insights into designing thermal resistors and understanding the thermal modulation of 2D materials by adjusting basic structure parameters.

  2. Attachment security, personality, and adjustment of elementary school children.

    Science.gov (United States)

    Goldner, Limor; Scharf, Miri

    2013-01-01

    Children's development is assumed to be closely related to their attachment security and their personality. The authors' aim was to examine the joint contribution of attachment security and personality traits to children's adjustment by examining diverse children's outcomes (emotional symptoms, social functioning, and behavioral problems) and using various perspectives (children, parents, and teachers). The sample comprised 247 8-12-year-old children from low socioeconomic status neighborhoods. Personality and attachment contribute to the different domains of adjustment. In cases of moderation, attachment security moderates the implications of personality traits on children's adjustment. The findings highlight the contribution of positive personality tendencies in playing down the difficulties of insecurely attached children.

  3. First test results for an adjustable phase undulator

    International Nuclear Information System (INIS)

    Carr, R.; Nuhn, H.D.; Corbett, J.

    1992-01-01

    An Adjustable Phase Undulator (APU) was installed and tested on the beamline 5 of the SPEAR storage ring. The APU has the same magnetic structure as a conventional adjustable gap undulator (AGU), but its magnetic field is varied by changing the longitudinal position between the rows of magnets, while keeping the gap between them fixed. The tests described here show that this undulator performs according to theoretical predictions and numerical models. The main reason to consider a phase adjustable design is the substantial reduction in size, complexity, and cost over comparable conventional designs. (author) 4 refs.; 3 figs

  4. LSL: a logarithmic least-squares adjustment method

    International Nuclear Information System (INIS)

    Stallmann, F.W.

    1982-01-01

    To meet regulatory requirements, spectral unfolding codes must not only provide reliable estimates for spectral parameters, but must also be able to determine the uncertainties associated with these parameters. The newer codes, which are more appropriately called adjustment codes, use the least squares principle to determine estimates and uncertainties. The principle is simple and straightforward, but there are several different mathematical models to describe the unfolding problem. In addition to a sound mathematical model, ease of use and range of options are important considerations in the construction of adjustment codes. Based on these considerations, a least squares adjustment code for neutron spectrum unfolding has been constructed some time ago and tentatively named LSL

  5. Adjustement of multigroup cross sections using fast reactor integral data

    International Nuclear Information System (INIS)

    Renke, C.A.C.

    1982-01-01

    A methodology for the adjustment of multigroup cross section is presented, structured with aiming to compatibility the limitated number of measured values of integral parameters known and disponible, and the great number of cross sections to be adjusted the group of cross section used is that obtained from the Carnaval II calculation system, understanding as formular the sets of calculation methods and data bases. The adjustment is realized, using the INCOAJ computer code, developed in function of one statistical formulation, structural from the bayer considerations, taking in account the measurement processes of cross section and integral parameters defined on statistical bases. (E.G.) [pt

  6. HOW TO STEER THE TRANSMISSION RATIO OF PLANETARY CONTINUOUSLY ADJUSTABLE GEAR TRAIN

    Directory of Open Access Journals (Sweden)

    A. M. Dankov

    2016-01-01

    Full Text Available The known attempts to create a continuously-adjustable gear train with solid gears have led to development of some so-called adaptive gears. The most structurally simple version of continuously- adjustable gear train is a two-wheel planetary gear. It is an obvious fact that an active regulation of gear ratio for the gear should be based on the presence of con- trolled elements (parameters and a mechanism for their control. In respect of the mentioned gear one of the controlled elements that is a compound central toothed gear has such controlled parameter as a nominal pitch diameter. In this case it can rotate or remain motionless. Other controlled element which is a planetary carrier has its own radius as a controlled parameter and makes a rotary motion with a great speed of a leading element. The purpose of the control mechanism is to ensure radial displacement of central toothed gear and planet gear sectors in the working gear. The paper describes the mechanism modifications and considers two variants for transfer of control action from its source to an object to be controlled. The transfer is ensured by mechanical gears (two variants and hydraulics.

  7. [The motive force of evolution based on the principle of organismal adjustment evolution.].

    Science.gov (United States)

    Cao, Jia-Shu

    2010-08-01

    From the analysis of the existing problems of the prevalent theories of evolution, this paper discussed the motive force of evolution based on the knowledge of the principle of organismal adjustment evolution to get a new understanding of the evolution mechanism. In the guide of Schrodinger's theory - "life feeds on negative entropy", the author proposed that "negative entropy flow" actually includes material flow, energy flow and information flow, and the "negative entropy flow" is the motive force for living and development. By modifying my own theory of principle of organismal adjustment evolution (not adaptation evolution), a new theory of "regulation system of organismal adjustment evolution involved in DNA, RNA and protein interacting with environment" is proposed. According to the view that phylogenetic development is the "integral" of individual development, the difference of negative entropy flow between organisms and environment is considered to be a motive force for evolution, which is a new understanding of the mechanism of evolution. Based on such understanding, evolution is regarded as "a changing process that one subsystem passes all or part of its genetic information to the next generation in a larger system, and during the adaptation process produces some new elements, stops some old ones, and thereby lasts in the larger system". Some other controversial questions related to evolution are also discussed.

  8. Social Support and Adjustment Outcomes of First-Year University Students in Hong Kong: Self-Esteem as a Mediator

    Science.gov (United States)

    Lau, Eva Yi Hung; Chan, Kevin Ka Shing; Lam, Chun Bun

    2018-01-01

    Although the contribution of family support and peer support to university adjustment has been examined separately, few attempts have been made to explore the mechanism underlying this relation. This is the first study in the Asian context to test the role of self-esteem in mediating the effect of social support on first-year university adjustment…

  9. Quantum mechanics

    CERN Document Server

    Powell, John L

    2015-01-01

    Suitable for advanced undergraduates, this thorough text focuses on the role of symmetry operations and the essentially algebraic structure of quantum-mechanical theory. Based on courses in quantum mechanics taught by the authors, the treatment provides numerous problems that require applications of theory and serve to supplement the textual material.Starting with a historical introduction to the origins of quantum theory, the book advances to discussions of the foundations of wave mechanics, wave packets and the uncertainty principle, and an examination of the Schrödinger equation that includ

  10. Quantum mechanics

    International Nuclear Information System (INIS)

    Rae, A.I.M.

    1981-01-01

    This book, based on a thirty lecture course given to students at the beginning of their second year, covers the quantum mechanics required by physics undergraduates. Early chapters deal with wave mechanics, including a discussion of the energy states of the hydrogen atom. These are followed by a more formal development of the theory, leading to a discussion of some advanced applications and an introduction to the conceptual problems associated with quantum measurement theory. Emphasis is placed on the fundamentals of quantum mechanics. Problems are included at the end of each chapter. (U.K.)

  11. Indexing mechanisms

    International Nuclear Information System (INIS)

    Wood, A.G.; Parker, G.E.; Berry, R.

    1976-01-01

    It is stated that the indexing mechanism described can be used in a nuclear reactor fuel element inspection rig. It comprises a tubular body adapted to house a canister containing a number of fuel elements located longtitudinally, and has two chucks spaced apart for displacing the fuel elements longitudinally in a stepwise manner, together with a plunger mechanism for displacing them successively into the chucks. A measuring unit is located between the chucks for measuring the diameter of the fuel elements at intervals about their circumferences, and a secondary indexing mechanism is provided for rotating the measuring unit in a stepwise manner. (U.K.)

  12. Robot Mechanisms

    CERN Document Server

    Lenarcic, Jadran; Stanišić, Michael M

    2013-01-01

    This book provides a comprehensive introduction to the area of robot mechanisms, primarily considering industrial manipulators and humanoid arms. The book is intended for both teaching and self-study. Emphasis is given to the fundamentals of kinematic analysis and the design of robot mechanisms. The coverage of topics is untypical. The focus is on robot kinematics. The book creates a balance between theoretical and practical aspects in the development and application of robot mechanisms, and includes the latest achievements and trends in robot science and technology.

  13. Development of Bioavailability Adjustment Factors: A Feasibility Study

    National Research Council Canada - National Science Library

    Rembish, Steve

    2000-01-01

    The primary purpose of this effort is to investigate the feasibility of developing and using bioavailability adjustment factors to modify intake assumptions used in risk assessments on a site-specific basis...

  14. The Role of Migrant Associations in Adjustment, Integration and ...

    African Journals Online (AJOL)

    2011-10-02

    Oct 2, 2011 ... such social networks bind Nigerian migrants together in their new ... in Adjustment, Integration and Development' was presented at ... of intra-regional or intra-African migration dominance in the general African migration,.

  15. Adjusting to Chinese Ascendancy in the Global Clothing Industry ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Adjusting to Chinese Ascendancy in the Global Clothing Industry (Africa South of Sahara) ... conference of McGill's Institute for the Study of International Development. ... IDRC partner the World Economic Forum is building a hub for inclusive ...

  16. 42 CFR 412.316 - Geographic adjustment factors.

    Science.gov (United States)

    2010-10-01

    ... Inpatient Hospital Capital Costs Basic Methodology for Determining the Federal Rate for Capital-Related... part. The adjustment factor equals the hospital wage index value applicable to the hospital raised to...

  17. Improved Conjugate Gradient Bundle Adjustment of Dunhuang Wall Painting Images

    Science.gov (United States)

    Hu, K.; Huang, X.; You, H.

    2017-09-01

    Bundle adjustment with additional parameters is identified as a critical step for precise orthoimage generation and 3D reconstruction of Dunhuang wall paintings. Due to the introduction of self-calibration parameters and quasi-planar constraints, the structure of coefficient matrix of the reduced normal equation is banded-bordered, making the solving process of bundle adjustment complex. In this paper, Conjugate Gradient Bundle Adjustment (CGBA) method is deduced by calculus of variations. A preconditioning method based on improved incomplete Cholesky factorization is adopt to reduce the condition number of coefficient matrix, as well as to accelerate the iteration rate of CGBA. Both theoretical analysis and experimental results comparison with conventional method indicate that, the proposed method can effectively conquer the ill-conditioned problem of normal equation and improve the calculation efficiency of bundle adjustment with additional parameters considerably, while maintaining the actual accuracy.

  18. IMPROVED CONJUGATE GRADIENT BUNDLE ADJUSTMENT OF DUNHUANG WALL PAINTING IMAGES

    Directory of Open Access Journals (Sweden)

    K. Hu

    2017-09-01

    Full Text Available Bundle adjustment with additional parameters is identified as a critical step for precise orthoimage generation and 3D reconstruction of Dunhuang wall paintings. Due to the introduction of self-calibration parameters and quasi-planar constraints, the structure of coefficient matrix of the reduced normal equation is banded-bordered, making the solving process of bundle adjustment complex. In this paper, Conjugate Gradient Bundle Adjustment (CGBA method is deduced by calculus of variations. A preconditioning method based on improved incomplete Cholesky factorization is adopt to reduce the condition number of coefficient matrix, as well as to accelerate the iteration rate of CGBA. Both theoretical analysis and experimental results comparison with conventional method indicate that, the proposed method can effectively conquer the ill-conditioned problem of normal equation and improve the calculation efficiency of bundle adjustment with additional parameters considerably, while maintaining the actual accuracy.

  19. Energy-efficient adjustable speed double inverter-fed woundrotor ...

    African Journals Online (AJOL)

    Energy-efficient adjustable speed double inverter-fed woundrotor induction motor ... at speeds up to double rated without the magnetic flux reducing is presented. ... Keywords: power, double-fed wound-rotor induction motor drive, steel and ...

  20. 10 CFR 766.104 - Reconciliation, adjustments and appeals.

    Science.gov (United States)

    2010-01-01

    .... The filing of a notice for an adjustment shall not stay the obligation to pay. (b) DOE may request... TESS data for any discrepancies or further transactions raised during the reconciliation process. (d...