WorldWideScience

Sample records for bmnpv displaying recombinant

  1. High-titer preparation of Bombyx mori nucleopolyhedrovirus (BmNPV displaying recombinant protein in silkworm larvae by size exclusion chromatography and its characterization

    Directory of Open Access Journals (Sweden)

    Tanaka Shigeyasu

    2009-06-01

    Full Text Available Abstract Background Budded baculoviruses are utilized for vaccine, the production of antibody and functional analysis of transmembrane proteins. In this study, we tried to produce and purify the recombinant Bombyx mori nucleopolyhedrovirus (rBmNPV-hPRR that displayed human (prorenin receptor (hPRR connected with FLAG peptide sequence on its own surface. These particles were used for further binding analysis of hPRR to human prorenin. The rBmNPV-hPRR was produced in silkworm larvae and purified from its hemolymph using size exclusion chromatography (SEC. Results A rapid method of BmNPV titer determination in hemolymph was performed using quantitative real-time PCR (Q-PCR. A correlation coefficient of BmNPV determination between end-point dilution and Q-PCR methods was found to be 0.99. rBmNPV-hPRR bacmid-injected silkworm larvae produced recombinant baculovirus of 1.31 × 108 plaque forming unit (pfu in hemolymph, which was 2.8 × 104 times higher than transfection solution in Bm5 cells. Its purification yield by Sephacryl S-1000 SF column chromatography was 264 fold from larval hemolymph at 4 days post-injection (p.i., but 35 or 39 fold at 4.5 or 5 days p.i., respectively. Protein patterns of rBmNPV-hPRR purified at 4 and 5 days were the same and ratio of envelope proteins (76, 45 and 35 kDa to VP39, one of nucleocapsid proteins, increased at 5 days p.i. hPRR was detected in only purified rBmNPV-hPRR at 5 days p.i.. Conclusion The successful purification of rBmNPV-hPRR indicates that baculovirus production using silkworm larvae and its purification from hemolymph by Sephacryl S-1000 SF column chromatography can provide an economical approach in obtaining the purified BmNPV stocks with high titer for large-scale production of hPRR. Also, it can be utilized for further binding analysis and screening of inhibitors of hPRR.

  2. Baculovirus display of fusion protein of Peste des petits ruminants virus and hemagglutination protein of Rinderpest virus and immunogenicity of the displayed proteins in mouse model

    International Nuclear Information System (INIS)

    Recombinant Bombyx mori nucleopolyhedroviruses (BmNPV) displaying the immunodominant ectodomains of fusion glycoprotein (F) of Peste des petitis ruminants virus (PPRV) and the hemagglutinin protein (H) of Rinderpest virus (RPV), on the budded virions as well as the surface of the infected host cells have been constructed. The F and H protein sequences were inserted in-frame within the amino-terminal region of BmNPV envelope glycoprotein GP64 expressing under the strong viral polyhedrin (polh) promoter. We improved the recombinant virus selection in BmNPV by incorporating the green fluorescent protein gene (gfp) as selection marker under a separate promoter within the transfer cassette harboring the desired genes. Following infection of the insect larvae or the host-derived BmN cells with these recombinant BmNPVs, the expressed GP64 fusion proteins were displayed on the host cell surface and the budded virions. The antigenic epitopes of the recombinant proteins were properly displayed and the recombinant virus particles induced immune response in mice against PPRV or RPV

  3. Immobilization of foreign protein into polyhedra of Bombyx mori nucleopolyhedrovirus (BmNPV)

    Institute of Scientific and Technical Information of China (English)

    Xing-wei XIANG; Rui YANG; Lin CHEN; Xiao-long HU; Shao-fang YU; Cui-ping CAO; Xiao-feng WU

    2012-01-01

    In the late phase of Bombyx mori nucleopolyhedrovirus (BmNPV) infection,a large amount of polyhedra appear in the infected cell nucleolus,these polyhedra being dense protein crystals protecting the incorporated virions from the harsh environment.To investigate whether the foreign protein could be immobilized into the polyhedra of BmNPV,two recombinant baculoviruses were generated by a novel BmNPV polyhedrin-plus (polh+) Bac-toBac system,designated as vBmBac(polh+)-enhanced green fluorescent protein (EGFP) and vBmBac(polh+)-LacZ,which can express the polyhedrin and foreign protein simultaneously.Light microscopy analysis showed that all viruses produced polyhedra of normal appearance.Green fluorescence can be apparently detected on the surface of the vBmBac(polh+)-EGFP polyhedra,but not the BmNPV polyhedra.Fluorescence analysis and anti-desiccation testing confirmed that EGFP was embedded in the polyhedra.As expected,the vBmBac(polh+)-LacZ polyhedre contained an amount of LacZ and had a higher β-galactosidase activity.Sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) and Western blotting were also performed to verify if the foreign proteins were immobilized into polyhedra.This study provides a new inspiration for efficient preservation of useful proteins and development of new pesticides with toxic proteins.

  4. Multifunctional recombinant phycobiliprotein-based fluorescent constructs and phycobilisome display

    Energy Technology Data Exchange (ETDEWEB)

    Glazer, Alexander N.; Cai, Yuping

    2007-02-13

    The invention provides multifunctional fusion constructs which are rapidly incorporated into a macromolecular structure such as a phycobilisome such that the fusion proteins are separated from one another and unable to self-associate. The invention provides methods and compositions for displaying a functional polypeptide domain on an oligomeric phycobiliprotein. including fusion proteins comprising a functional displayed domain and a functional phycobiliprotein domain incorporated in a functional oligomeric phycobiliprotein. The fusion proteins provide novel specific labeling reagents.

  5. Multifunctional recombinant phycobiliprotein-based fluorescent constructs and phycobilisome display

    Energy Technology Data Exchange (ETDEWEB)

    Glazer, Alexander N.; Cai, Yuping

    2003-11-18

    The invention provides multifunctional fusion constructs which are rapidly incorporated into a macromolecular structure such as a phycobilisome such that the fusion proteins are separated from one another and unable to self-associate. The invention provides methods and compositions for displaying a functional polypeptide domain on an oligomeric phycobiliprotein, including fusion proteins comprising a functional displayed domain and a functional phycobiliprotein domain incorporated in a functional oligomeric phycobiliprotein. The fusion proteins provide novel specific labeling reagents.

  6. Multifunctional recombinant phycobiliprotein-based fluorescent constructs and phycobilisome display

    Energy Technology Data Exchange (ETDEWEB)

    Glazer, Alexander N.; Cai, Yuping

    2007-01-30

    The invention provides multifunctional fusion constructs which are rapidly incorporated into a macromolecular structure such as a phycobilisome such that the fusion proteins are separated from one another and unable to self-associate. The invention provides methods and compositions for displaying a functional polypeptide domain on an oligomeric phycobiliprotein, including fusion proteins comprising a functional displayed domain and a functional phycobiliprotein domain incorporated in a functional oligomeric phycobiliprotein. The fusion proteins provide novel specific labeling reagents.

  7. Display of recombinant proteins at the surface of lactic acid bacteria: strategies and applications.

    Science.gov (United States)

    Michon, C; Langella, P; Eijsink, V G H; Mathiesen, G; Chatel, J M

    2016-01-01

    Lactic acid bacteria (LAB) are promising vectors of choice to deliver active molecules to mucosal tissues. They are recognized as safe by the World Health Organization and some strains have probiotic properties. The wide range of potential applications of LAB-driven mucosal delivery includes control of inflammatory bowel disease, vaccine delivery, and management of auto-immune diseases. Because of this potential, strategies for the display of proteins at the surface of LAB are gaining interest. To display a protein at the surface of LAB, a signal peptide and an anchor domain are necessary. The recombinant protein can be attached to the membrane layer, using a transmembrane anchor or a lipoprotein-anchor, or to the cell wall, by a covalent link using sortase mediated anchoring via the LPXTG motif, or by non-covalent liaisons employing binding domains such as LysM or WxL. Both the stability and functionality of the displayed proteins will be affected by the kind of anchor used. The most commonly surfaced exposed recombinant proteins produced in LAB are antigens and antibodies and the most commonly used LAB are lactococci and lactobacilli. Although it is not necessarily so that surface-display is the preferred localization in all cases, it has been shown that for certain applications, such as delivery of the human papillomavirus E7 antigen, surface-display elicits better biological responses, compared to cytosolic expression or secretion. Recent developments include the display of peptides and proteins targeting host cell receptors, for the purpose of enhancing the interactions between LAB and host. Surface-display technologies have other potential applications, such as degradation of biomass, which is of importance for some potential industrial applications of LAB. PMID:27142045

  8. Surface display of recombinant Drosophila melanogaster acetylcholinesterase for detection of organic phosphorus and carbamate pesticides.

    Directory of Open Access Journals (Sweden)

    Jingquan Li

    Full Text Available Acetylcholinesterase (AChE is commonly used for the detection of organophosphate (OP and carbamate (CB insecticides. However, the cost of this commercially available enzyme is high, making high-throughput insecticide detection improbable. In this study we constructed a new AChE yeast expression system in Saccharomyces cerevisiae for the expression of a highly reactive recombinant AChE originating from Drosophila melanogaster (DmAChE. Specifically, the coding sequence of DmAChE was fused with the 3'-terminal half of an α-agglutinin anchor region, along with an antigen tag for the detection of the recombinant protein. The target sequence was cloned into the yeast expression vector pYes-DEST52, and the signal peptide sequence was replaced with a glucoamylase secretion region for induced expression. The resultant engineered vector was transformed into S. cerevisiae. DmAChE was expressed and displayed on the cell surface after galactose induction. Our results showed that the recombinant protein displayed activity comparable to the commercial enzyme. We also detected different types of OP and CB insecticides through enzyme inhibition assays, with the expressed DmAChE showing high sensitivity. These results show the construction of a new yeast expression system for DmAChE, which can subsequently be used for detecting OP and CB insecticides with reduced economic costs.

  9. Directed Selection of Recombinant Human Monoclonal Antibodies to Herpes Simplex Virus Glycoproteins from Phage Display Libraries

    Science.gov (United States)

    Sanna, Pietro Paolo; Williamson, R. Anthony; de Logu, Alessandro; Bloom, Floyd E.; Burton, Dennis R.

    1995-07-01

    Human monoclonal antibodies have considerable potential in the prophylaxis and treatment of viral disease. However, only a few such antibodies suitable for clinical use have been produced to date. We have previously shown that large panels of human recombinant monoclonal antibodies against a plethora of infectious agents, including herpes simplex virus types 1 and 2, can be established from phage display libraries. Here we demonstrate that facile cloning of recombinant Fab fragments against specific viral proteins in their native conformation can be accomplished by panning phage display libraries against viral glycoproteins "captured" from infected cell extracts by specific monoclonal antibodies immobilized on ELISA plates. We have tested this strategy by isolating six neutralizing recombinant antibodies specific for herpes simplex glycoprotein gD or gB, some of which are against conformationally sensitive epitopes. By using defined monoclonal antibodies for the antigen-capture step, this method can be used for the isolation of antibodies to specific regions and epitopes within the target viral protein. For instance, monoclonal antibodies to a nonneutralizing epitope can be used in the capture step to clone antibodies to neutralizing epitopes, or antibodies to a neutralizing epitope can be used to clone antibodies to a different neutralizing epitope. Furthermore, by using capturing antibodies to more immunodominant epitopes, one can direct the cloning to less immunogenic ones. This method should be of value in generating antibodies to be used both in the prophylaxis and treatment of viral infections and in the characterization of the mechanisms of antibody protective actions at the molecular level.

  10. Construction and immunogenicity of recombinant porcine circovirus-like particles displaying somatostatin.

    Science.gov (United States)

    Li, Wenliang; Wang, Xianwei; Bai, Juan; Ma, Tao; Li, Zhijun; Li, Yufeng; Jiang, Ping

    2013-04-12

    In order to obtain a virus-like particles (VLPs) vaccine both for porcine circovirus type 2 (PCV2) prevention and growth-promotion, somatostatin (SS) gene was fused to the 3'-terminal of ORF2 gene of PCV2 with PCR, and a recombinant baculovirus (rAc-Cap-SS) was constructed. The expression of fusion protein Cap-SS (rCap-SS) with molecular weight of approximately 32kDa was identified by Western blot and indirect immunofluorescence assay in Sf9 cells. The self-assembled VLPs were observed under electron microscopy, which being morphologically similar to the recombinant Cap protein (rCap) expressed in the same baculovirus expressing system. Ninety four-week-old mice were immunized with the recombinant proteins twice. The results showed that mice immunized with rCap-SS protein developed antibody against Cap, which levels being similar to those immunized with rCap protein. The body weight gain and anti-SS antibody in rCap-SS group was higher than those of rCap and negative control groups during 28 and 42 days post inoculation (dpi). Furthermore, twenty 28-day-old piglets were vaccinated twice subcutaneously with the recombinant proteins. The results indicated that PCV2-specific antibody could be induced after vaccination with rCap-SS or rCap protein. Anti-SS antibody could be induced after rCap-SS vaccination and was higher than other groups at 14 and 28 dpi. The level of somatostatin concentration in the blood of pigs in rCap-SS group was significantly decreased at 14 dpi than other groups (Pcircovirus-like particles displaying somatostatin might be a novel subunit vaccine candidate for preventing PMWS and promoting pig growth. PMID:23294858

  11. Display

    OpenAIRE

    Gaskell, Ivan

    2011-01-01

    The display of religious objects takes many forms. While sculpture on the exterior of religious buildings is visible for the long term, relics, cult images, and masquerades are shown only occasionally. One way of emphasizing the potency of an object is to reveal it infrequently. In many religious systems display is restricted, for some things are dangerous to inappropriate viewers, while others are too powerful to be seen by anyone. When access is possible, viewers value intimate encounter, u...

  12. Recombinant human heterodimeric IL-15 complex displays extensive and reproducible N- and O-linked glycosylation.

    Science.gov (United States)

    Thaysen-Andersen, M; Chertova, E; Bergamaschi, C; Moh, E S X; Chertov, O; Roser, J; Sowder, R; Bear, J; Lifson, J; Packer, N H; Felber, B K; Pavlakis, G N

    2016-06-01

    Human interleukin 15 (IL-15) circulates in blood as a stable molecular complex with the soluble IL-15 receptor alpha (sIL-15Rα). This heterodimeric IL-15:sIL-15Rα complex (hetIL-15) shows therapeutic potential by promoting the growth, mobilization and activation of lymphocytes and is currently evaluated in clinical trials. Favorable pharmacokinetic properties are associated with the heterodimeric formation and the glycosylation of hetIL-15, which, however, remains largely uncharacterized. We report the site-specific N- and O-glycosylation of two clinically relevant large-scale preparations of HEK293-derived recombinant human hetIL-15. Intact IL-15 and sIL-15Rα and derived glycans and glycopeptides were separately profiled using multiple LC-MS/MS strategies. IL-15 Asn79 and sIL-15Rα Asn107 carried the same repertoire of biosynthetically-related N-glycans covering mostly α1-6-core-fucosylated and β-GlcNAc-terminating complex-type structures. The two potential IL-15 N-glycosylation sites (Asn71 and Asn112) located at the IL-2 receptor interface were unoccupied. Mass analysis of intact IL-15 confirmed its N-glycosylation and suggested that Asn79-glycosylation partially prevents Asn77-deamidation. IL-15 contained no O-glycans, whereas sIL-15Rα was heavily O-glycosylated with partially sialylated core 1 and 2-type mono- to hexasaccharides on Thr2, Thr81, Thr86, Thr156, Ser158, and Ser160. The sialoglycans displayed α2-3- and α2-6-NeuAc-type sialylation. Non-human, potentially immunogenic glycoepitopes (e.g. N-glycolylneuraminic acid and α-galactosylation) were not displayed by hetIL-15. Highly reproducible glycosylation of IL-15 and sIL-15Rα of two batches of hetIL-15 demonstrated consistent manufacturing and purification. In conclusion, we document the heterogeneous and reproducible N- and O-glycosylation of large-scale preparations of the therapeutic candidate hetIL-15. Site-specific mapping of these molecular features is important to evaluate the consistent

  13. [Construction and panning of scFv phage display library against recombinant interleukin 4 receptor].

    Science.gov (United States)

    Yang, Guangyong; Guo, Haitao; Liu, Ximing; He, Guangzhi; Tian, Weiyi; Cai, Kun; Wang, Ping; Wang, Wenjia

    2016-06-01

    Objective To construct the recombinant human interleukin 4 receptor (rhIL-4R) single-chain Fv (scFv) antibody library by phage display technique to obtain the anti-IL-4R scFv clones selected from the library. Methods Total RNA was extracted from splenocytes of the BALB/c mice immunized with rhIL-4R. Complementary DNA fragments of variable heavy (VH) and variable light (VL) chains of the antibodies were prepared by reverse transcription PCR and assembled into scFv by splice overlap extension PCR (SOE-PCR). Both scFv and the pCANTAB5E vector were respectively double-digested with restriction endonuclease Sfi I and Not I, connected with T4 ligase, and then transformed into the competent cells E.coli TG1; it was cultured in medium to obtain the phage scFv antibody library; after three rounds of enrichment and panning, the specific antigen scFv with high affinity was selected for the sequencing. Results After three rounds of panning, we obtained a diversity of approximately 2×10(8) anti-rhIL-4R scFv antibody library. Sequencing analysis of one positive clone showed that the anti-rhIL-4R scFv was 741 bp and coded 247 amino acids. The analysis of VBASE2 database indicated that VH and VL gene sequences of anti-rhIL-4R protein all had three complementarity determining regions and four backbone areas.Conclusion The anti-rhIL-4R scFv was obtained from the scFv antibody library. PMID:27371853

  14. Vaccination against Very Virulent Infectious Bursal Disease Virus Using Recombinant T4 Bacteriophage Displaying Viral Protein VP2

    Institute of Scientific and Technical Information of China (English)

    Yong-Chang CAO; Quan-Cheng SHI; Jing-Yun MA; Qing-Mei XIE; Ying-Zuo BI

    2005-01-01

    In order to develop a desirable inexpensive, effective and safe vaccine against the very virulent infectious bursal disease virus (vvIBDV), we tried to take advantage of the emerging T4 bacteriophage surface protein display system. The major immunogen protein VP2 from the vvIBDV strain HK46 was fused to the nonessential T4 phage surface capsid protein, a small outer capsid (SOC) protein, resulting in the 49 kDa SOC-VP2 fusion protein, which was verified by sodium dodecylsulfate polyacrylamide gel electrophoresis and Western blot. Immunoelectromicroscopy showed that the recombinant VP2 protein was successfully displayed on the surface of the T4 phage. The recombinant VP2 protein is antigenic and showed reactivities to various monoclonal antibodies (mAbs) against IBDV, whereas the wild-type phage T4 could not react to any mAb. In addition, the recombinant VP2 protein is immunogenic and elicited specific antibodies in immunized specific pathogen free (SPF) chickens. More significantly, immunization of SPF chickens with the recombinant T4-VP2 phage protected them from infection by the vvIBDV strain HK46. When challenged with the vvIBDV strain HK46 at a dose of 100 of 50% lethal dose (LD50) per chicken 4 weeks after the booster was given, the group vaccinated with the T4-VP2 recombinant phage showed no clinical signs of disease or death, wh ereas the unvaccinated group and the group vaccinated with the wild-type T4phage exhibited 100% clinical signs of disease and bursal damages, and 30%-40% mortality. Collectively,the data herein showed that the T4-displayed VP2 protein might be an inexpensive, effective and safe vaccine candidate against vvIBDV.

  15. Comparative Transcriptome Analysis of Bombyx mori (Lepidoptera) Larval Midgut Response to BmNPV in Susceptible and Near-Isogenic Resistant Strains

    Science.gov (United States)

    Geng, Lei; Xu, Jia-Ping; Yu, Dong; Zhang, Shang-Zhi; Ma, Yan; Fei, Dong-Qiong

    2016-01-01

    Bombyx mori nucleopolyhedrovirus (BmNPV) is one of the primary pathogens causing severe economic losses in sericulture. However, the molecular mechanism of silkworm resistance to BmNPV remains largely unknown. Here, the recurrent parent P50 (susceptible strain) and the near-isogenic line BC9 (resistance strain) were used in a comparative transcriptome study examining the response to infection with BmNPV. A total of 14,300 unigenes were obtained from two different resistant strains; of these, 869 differentially expressed genes (DEGs) were identified after comparing the four transcriptomes. Many DEGs associated with protein metabolism, cytoskeleton, and apoptosis may be involved in the host response to BmNPV infection. Moreover, some immunity related genes were also altered following BmNPV infection. Specifically, after removing genetic background and individual immune stress response genes, 22 genes were found to be potentially involved in repressing BmNPV infection. These genes were related to transport, virus replication, intracellular innate immune, and apoptosis. Our study provided an overview of the molecular mechanism of silkworm resistance to BmNPV infection and laid a foundation for controlling BmNPV in the future. PMID:27168061

  16. Comparative Transcriptome Analysis of Bombyx mori (Lepidoptera Larval Midgut Response to BmNPV in Susceptible and Near-Isogenic Resistant Strains.

    Directory of Open Access Journals (Sweden)

    Xue-Yang Wang

    Full Text Available Bombyx mori nucleopolyhedrovirus (BmNPV is one of the primary pathogens causing severe economic losses in sericulture. However, the molecular mechanism of silkworm resistance to BmNPV remains largely unknown. Here, the recurrent parent P50 (susceptible strain and the near-isogenic line BC9 (resistance strain were used in a comparative transcriptome study examining the response to infection with BmNPV. A total of 14,300 unigenes were obtained from two different resistant strains; of these, 869 differentially expressed genes (DEGs were identified after comparing the four transcriptomes. Many DEGs associated with protein metabolism, cytoskeleton, and apoptosis may be involved in the host response to BmNPV infection. Moreover, some immunity related genes were also altered following BmNPV infection. Specifically, after removing genetic background and individual immune stress response genes, 22 genes were found to be potentially involved in repressing BmNPV infection. These genes were related to transport, virus replication, intracellular innate immune, and apoptosis. Our study provided an overview of the molecular mechanism of silkworm resistance to BmNPV infection and laid a foundation for controlling BmNPV in the future.

  17. Engineering Recombinant Reoviruses To Display gp41 Membrane-Proximal External-Region Epitopes from HIV-1

    Science.gov (United States)

    Boehme, Karl W.; Ikizler, Mine'; Iskarpatyoti, Jason A.; Wetzel, J. Denise; Willis, Jordan; Crowe, James E.; LaBranche, Celia C.; Montefiori, David C.

    2016-01-01

    ABSTRACT The gp41 membrane-proximal external region (MPER) is a target for broadly neutralizing antibody responses against human immunodeficiency virus type 1 (HIV-1). However, replication-defective virus vaccines currently under evaluation in clinical trials do not efficiently elicit MPER-specific antibodies. Structural modeling suggests that the MPER forms an α-helical coiled coil that is required for function and immunogenicity. To maintain the native MPER conformation, we used reverse genetics to engineer replication-competent reovirus vectors that displayed MPER sequences in the α-helical coiled-coil tail domain of viral attachment protein σ1. Sequences in reovirus strain type 1 Lang (T1L) σ1 were exchanged with sequences encoding HIV-1 strain Ba-L MPER epitope 2F5 or the entire MPER. Individual 2F5 or MPER substitutions were introduced at virion-proximal or virion-distal sites in the σ1 tail. Recombinant reoviruses containing heterologous HIV-1 sequences were viable and produced progeny yields comparable to those with wild-type virus. HIV-1 sequences were retained following 10 serial passages in cell culture, indicating that the substitutions were genetically stable. Recombinant viruses engineered to display the 2F5 epitope or full-length MPER in σ1 were recognized by purified 2F5 antibody. Inoculation of mice with 2F5-containing vectors or rabbits with 2F5- or MPER-containing vectors elicited anti-reovirus antibodies, but HIV-1-specific antibodies were not detected. Together, these findings indicate that heterologous sequences that form α-helices can functionally replace native sequences in the α-helical tail domain of reovirus attachment protein σ1. However, although these vectors retain native antigenicity, they were not immunogenic, illustrating the difficulty of experimentally inducing immune responses to this essential region of HIV-1. IMPORTANCE Vaccines to protect against HIV-1, the causative agent of AIDS, are not approved for use

  18. Gastroesophageal junction adenocarcinoma displays abnormalities in homologous recombination and nucleotide excision repair

    Directory of Open Access Journals (Sweden)

    Dewalt RI

    2014-02-01

    Full Text Available Robin I Dewalt,1 Kenneth A Kesler,2 Zane T Hammoud,3 LeeAnn Baldridge,4 Eyas M Hattab,4 Shadia I Jalal1,5 1Division of Hematology/Oncology, Department of Medicine, 2Cardiothoracic Division, Department of Surgery, Indiana University School of Medicine, Indianapolis, IN, USA; 3Henry Ford Hospital, Detroit, MI, USA; 4Department of Pathology and Laboratory Medicine, Indiana University School of Medicine, Indianapolis, IN, USA; 5Indiana University Melvin and Bren Simon Cancer Center, Indianapolis, IN, USA Objective: Esophageal adenocarcinoma (EAC continues to be a disease associated with high mortality. Among the factors leading to poor outcomes are innate resistance to currently available therapies, advanced stage at diagnosis, and complex biology. Platinum and ionizing radiation form the backbone of treatment for the majority of patients with EAC. Of the multiple processes involved in response to platinum chemotherapy or ionizing radiation, deoxyribonucleic acid (DNA repair has been a major player in cancer sensitivity to these agents. DNA repair defects have been described in various malignancies. The purpose of this study was to determine whether alterations in DNA repair are present in EAC compared with normal gastroesophageal tissues. Methods: We analyzed the expression of genes involved in homologous recombination (HR, nonhomologous end-joining, and nucleotide excision repair (NER pathways in 12 EAC tumor samples with their matched normal counterparts. These pathways were chosen because they are the main pathways involved in the repair of platinum- or ionizing-radiation-induced damage. In addition, abnormalities in these pathways have not been well characterized in EAC. Results: We identified increased expression of at least one HR gene in eight of the EAC tumor samples. Alterations in the expression of EME1, a structure-specific endonuclease involved in HR, were the most prevalent, with messenger (mRNA overexpression in six of the EAC samples

  19. Expression analysis of several antiviral related genes to BmNPV in different resistant strains of silkworm, Bombyx mori.

    Science.gov (United States)

    Cheng, Yang; Wang, Xue-yang; Du, Chang; Gao, Juan; Xu, Jia-ping

    2014-01-01

    Bombyx mori L. (Lepidoptera: Bombycidae) nucleopolyhedrovirus (BmNPV) is a highly pathogenic virus in the sericultural industry, often causing severe damage leading to large economic losses. The immune mechanisms of B. mori against this virus remain obscure. Previous studies had demonstrated Bmlipase-1, BmNox and Bmserine protease-2 showing antiviral activity in vitro, but data on the transcription levels of these proteins in different resistant strains were not reported. In order to determine the resistance level of the four different strains (P50, A35, A40, A53) and gain a better understanding of the mechanism of resistance to BmNPV in B. mori, the relative expression level of the genes coding the three antiviral proteins in larval haemolymph and midgut of different B. mori strains resistant to BmNPV was determined. The results showed that these genes expressed significantly higher in the resistant strains compared to the susceptible strain, and the differential expression levels were consistent with the LC50 values in different strains. The transcription level of the target genes almost all up-regulated in the larvae midgut and down-regulated in the haemolymph. The results indicate the correlation of these genes to BmNPV resistance in B. mori. PMID:25373223

  20. Construction of a host range-expanded hybrid baculovirus of BmNPV and AcNPV,and knockout of cysteinase gene for more efficient expression

    Institute of Scientific and Technical Information of China (English)

    WU Xiaofeng; CAO Cuiping; XU Yaxiang; LU Xingmeng

    2004-01-01

    AcNPV(Autographa californica nuclear polyhedrosis virus)and BmNPV(Bombyx mori nuclear polyhedrosis virus)are two principal insect-baculovirus expression systems,each having different characteristics.AcNPV has a wider host range and can infect a series of cell lines thus making it suitable for cell suspension culture expression,but the small size of the host insect,A.californica,makes AcNPV less suitable for large scale protein synthesis.In contrast,BmNPV can only infect the silkworm,Bornbyx rnori,which is well-known for its easy rearing and large size.These characteristics make the BmNPV system especially suitable for large-scale industrial expression.To utilize the advantages of both AcNPV and BmNPV,we tried to expand their host range through homologous recombination and successfully constructed a hybrid baculovirus of AcNPV and BmNPV,designated as HyNPV.The hybrid baculovirus can infect the hosts of both AcNPV and BmNPV.Taking the human basic fibroblast growth factor(Bfgf)gene as an application example,we constructed a recombinant,HyNPV-Bfgf.This construct is able to express the Bfgf protein both in silkworm larvae and in common-use cell lines,sf21,sf9 and High-five.Moreover,to reduce the loss of recombinant protein due to degradation by proteases that are simultaneously expressed by the baculovirus,we knocked out the cysteinase gene coding for one of the most important baculovirus proteases.This knockout mutation improves the production efficiency of the Bfgf recombinant protein.

  1. Isolation and Evaluation of Specific Human Recombinant Antibodies from a Phage Display Library against HER3 Cancer Signaling Antigen

    Directory of Open Access Journals (Sweden)

    Foroogh Nejatollahi

    2014-07-01

    Full Text Available Background: The human epidermal growth factor receptor family comprises four homologous members: EGFR (ErbB1, ErbB2 (HER2, ErbB3 (HER3 and ErbB4 (HER4.This family plays an important role in the signaling pathway and cell proliferation. The heterodimerization of HER2 with HER3 leads to tumor cell proliferation. Monoclonal antibody to the human HER3 receptor blocks HER3 heterodimerization and inhibits the growth of breast cancer cells. Due to their human origin, small size, rapid penetration and high affinity properties, recombinant single chain antibodies (scFv have been introduced as the most desired agents for cancer immunotherapy. In this study, we use a phage display system to select specific scFvs against HER3 for their use in cancer targeted therapy. Methods: A phage antibody display library of scFv was panned against an immunodominant epitope of HER3. Phage rescue was performed on the library. The supernatant that contained the appropriate scFv (109 PFU/ml was added to an immunotube which was coated with the peptide. Elution was done using log phase E. coli TG1. The clones were amplified by PCR and DNA fingerprinted to select the specific clones against the epitope. The specificity of the selected antibodies was tested in ELISA. Results: The results represented two predominant patterns with the frequency of 25%. The other patterns showed the frequencies of 5%-10%. scFv1 and scFv2 demonstrated positive ELISA with absorbances of 0.63 and 0.46, respectively while the absorbances of wells without peptide were 0.19 and 0.11, respectively. Conclusion: In this study two specific scFvs were selected against HER3 antigen in a successful panning process. Phage ELISA represented the specific binding of scFvs against HER3.The selected scFvs reacted only with the corresponding peptides. However, no reaction with the other peptides was detected. The selected anti-HER3 scFvs have suggested that these human high affinity and small antibodies that bind

  2. Inhibition of BmNPV replication in Bombyx mori cell by dsRNA triggered RNA interference

    Institute of Scientific and Technical Information of China (English)

    XU Ying; ZHU Chenggang; JIN Yongfeng; ZHANG Yaozhou

    2004-01-01

    RNA interference (RNAi) causes degradation of targeted endogenous RNA in many diverse organisms, To investigate the effect of dsRNA on silkworm cells, we transfected three kinds of synthetic dsRNAs of 435 bp(Ap1), 300bp(Ape) and 399 bp(Au) in length against the various regions of BmNPV's DNA polymerase gene and DNA helicase gene,which are indispensable for viral replication in silkworm cells by TransMessengerTM transfection Reagent. Results indicated that in the experiment where silkworm cells were infected with wild-strain BmNPV of the three dsRNAs, Ap2 and AH can effectively suppress the replication of virus, but Ap1 had no effect on the inhibition of viral replication. Ap2 and Au can reduce the infective titer of BmNPV with a peak change of approximately 3-4 logs on day 4 post-infection.The results of reverse transcript polylnerase chain reaction (RT-PCR) and DNA dot blotting also indicated that the expression level of the two target genes and the quantity of viral DNA both distinctly decreased under the influence of Ap2 or Au. Furthermore, using fluorescence microscopy we analyzed the distribution patterns of dsRNA. Our studies revealed that a majority of dsRNA was localized in the nuclear periphery discontinuously after 24 h of transfection.

  3. Phage display used for gene cloning of human recombinant antibody against the erythrocyte surface antigen, rhesus D

    DEFF Research Database (Denmark)

    Dziegiel, Morten Hanefeld; Nielsen, L K; Andersen, P S; Blancher, A; Dickmeiss, E; Engberg, J

    1995-01-01

    A novel phage display system has been developed for PCR amplification and cloning of the Fab fragments of human immunoglobulin genes. Using this system, we have cloned an antibody from a mouse-human hybridoma cell line directed against the erythrocyte antigen rhesus D. Intact erythrocytes were used...

  4. Identification and characterization of the Bombyx mori myosin II essential light chain and its effect in BmNPV infection

    Directory of Open Access Journals (Sweden)

    L Hao

    2015-02-01

    Full Text Available Myosin, as a type of molecular motor, is mainly involved in muscle contraction. Recently, myosin research has made considerable progress. However, the function of Bombyx mori myosin remains unclear. In this study, we cloned the BmMyosin II essential light chain (BmMyosin II ELC gene from a cDNA library of silkworm, which had an open reading frame (ORF of 444 bp encoding 147 amino acids (about 16 kDa. After analyzing their sequences, BmMyosin II ELC was similar to the ELCs of 27 other Myosin II types, which contained EFh domain that bound Ca2+. In addition, 28 sequences had five motifs, motifs 1 and 3 were relatively conserved. We constructed two vectors with BmMyosin to transfect MGC803 or BmN, monolayer wound healing of cells indicated they can promote cell migration successfully. For three fifth instar silkworms, Bm306, BmNB, BmBC8, we mainly analyzed the change of BmMyosin II ELC from transcription and translation after infecting with nucleopolyhedrovirus (BmNPV. We found that gene expression of resistant strains were higher than susceptible strains at 12 h, while the result of the translation level was opposite that of the transcription level. Through in vitro protein interactions, we found BmMyosin II ELC can interact with BmNPV ubiquitin.

  5. Phage display used for gene cloning of human recombinant antibody against the erythrocyte surface antigen, rhesus D

    DEFF Research Database (Denmark)

    Dziegiel, M; Nielsen, L K; Andersen, P S;

    1995-01-01

    A novel phage display system has been developed for PCR amplification and cloning of the Fab fragments of human immunoglobulin genes. Using this system, we have cloned an antibody from a mouse-human hybridoma cell line directed against the erythrocyte antigen rhesus D. Intact erythrocytes were used...... for absorption of the Fab phages. Soluble Fab fragments produced from the cloned material showed identical performance to the parental antibody in agglutination assays. Gel filtration confirmed that the Fab fragment consists of a kappa-Fd heterodimer. The successful use of intact cells for selection...

  6. Recombinant Escherichia coli produces tailor-made biopolyester granules for applications in fluorescence activated cell sorting: functional display of the mouse interleukin-2 and myelin oligodendrocyte glycoprotein

    Directory of Open Access Journals (Sweden)

    Brockelbank Jane A

    2007-01-01

    Full Text Available Abstract Background Fluorescence activated cell sorting (FACS is a powerful technique for the qualitative and quantitative detection of biomolecules used widely in both basic research and clinical diagnostic applications. Beads displaying a specific antigen are used to bind antibodies which are then fluorescently labelled using secondary antibodies. As the individual suspension bead passes through the sensing region of the FACS machine, fluorescent signals are acquired and analysed. Currently, antigens are tediously purified and chemically cross-linked to preformed beads. Purification and coupling of proteins often renders them inactive and they will not be displayed in its native configuration. As an alternative, we genetically engineered Escherichia coli to produce biopolyester (polyhdroxyalkanoate=PHA granules displaying diagnostically relevant antigens in their native conformation and suitable for FACS analysis. Results Hybrid genes were constructed, which encode either the mouse interleukin-2 (IL2 or the myelin oligodendrocyte glycoprotein (MOG fused via an enterokinase site providing linker region to the C terminus of the PHA granule associated protein PhaP, respectively. The hybrid genes were expressed in PHA-accumulating recombinant E. coli. MOG and IL2 fusion proteins were abundantly attached to PHA granules and were identified by MALDI-TOF/MS analysis and N terminal sequencing. A more abundant second fusion protein of either MOG or IL2 resulted from an additional N terminal fusion, which did surprisingly not interfere with attachment to PHA granule. PHA granules displaying either IL2 or MOG were used for FACS using monoclonal anti-IL2 or anti-MOG antibodies conjugated to a fluorescent dye. FACS analysis showed significant and specific binding of respective antibodies. Enterokinase treatment of IL2 displaying PHA granules enabled removal of IL2 as monitored by FACS analysis. Mice were immunized with either MOG or OVA (ovalbumin and the

  7. Recombinant Soluble Respiratory Syncytial Virus F Protein That Lacks Heptad Repeat B, Contains a GCN4 Trimerization Motif and Is Not Cleaved Displays Prefusion-Like Characteristics.

    Directory of Open Access Journals (Sweden)

    Ivy Widjaja

    Full Text Available The respiratory syncytial virus (RSV fusion protein F is considered an attractive vaccine candidate especially in its prefusion conformation. We studied whether recombinant soluble RSV F proteins could be stabilized in a prefusion-like conformation by mutation of heptad repeat B (HRB. The results show that soluble, trimeric, non-cleaved RSV F protein, produced by expression of the furin cleavage site-mutated F ectodomain extended with a GCN4 trimerization sequence, is efficiently recognized by pre- as well as postfusion-specific antibodies. In contrast, a similar F protein completely lacking HRB displayed high reactivity with prefusion-specific antibodies recognizing antigenic site Ø, but did not expose postfusion-specific antigenic site I, in agreement with this protein maintaining a prefusion-like conformation. These features were dependent on the presence of the GCN4 trimerization domain. Absence of cleavage also contributed to binding of prefusion-specific antibodies. Similar antibody reactivity profiles were observed when the prefusion form of F was stabilized by the introduction of cysteine pairs in HRB. To study whether the inability to form the 6HB was responsible for the prefusion-like antibody reactivity profile, alanine mutations were introduced in HRB. Although introduction of alanine residues in HRB inhibited the formation of the 6HB, the exposure of postfusion-specific antigenic site I was not prevented. In conclusion, proteins that are not able to form the 6HB, due to mutation of HRB, may still display postfusion-specific antigenic site I. Replacement of HRB by the GCN4 trimerization domain in a non-cleaved soluble F protein resulted, however, in a protein with prefusion-like characteristics, suggesting that this HRB-lacking protein may represent a potential prefusion F protein subunit vaccine candidate.

  8. Genome wide microarray based expression profiles associated with BmNPV resistance and susceptibility in Indian silkworm races of Bombyx mori.

    Science.gov (United States)

    Lekha, Govindaraj; Gupta, Tania; Awasthi, Arvind K; Murthy, Geetha N; Trivedy, Kanika; Ponnuvel, Kangayam M

    2015-12-01

    The molecular mechanism involved in BmNPV resistance was investigated using a genome wide microarray in midgut tissue of Indian silkworm Bombyx mori. In resistant race (Sarupat), 735 genes up-regulated and 589 genes down-regulated at 12 h post BmNPV infection. Similarly, in case of susceptible race (CSR-2), 2183 genes up-regulated and 2115 genes down-regulated. Among these, nine up-regulated and eight down-regulated genes were validated using real-time qPCR analysis. In Sarupat, vacuolar protein sorting associated, Xfin-like protein and carboxypeptidase E-like protein genes significantly up-regulated in infected midgut; prominently down-regulated genes were glutamate receptor ionotropic kainite 2-like, BTB/POZ domain and transferrin. Considerably up-regulated genes in the CSR-2 were peptidoglycan recognition protein S6 precursor and rapamycin while the conspicuous down-regulated genes were facilitated trehalose transporter and zinc transporter ZIP1-like gene. The up-regulation of genes in resistant race after BmNPV infection indicates their possible role in antiviral immune response. PMID:26376410

  9. Transcriptomic Analysis of Resistant and Susceptible Bombyx mori Strains Following BmNPV Infection Provides Insights into the Antiviral Mechanisms.

    Science.gov (United States)

    Li, Gang; Qian, Heying; Luo, Xufang; Xu, Pingzhen; Yang, Jianhua; Liu, Mingzhu; Xu, Anying

    2016-01-01

    Purpose. To decipher transcriptomic changes and related genes with potential functions against Bombyx mori nucleopolyhedrovirus infection and to increase the understanding of the enhanced virus resistance of silkworm on the transcriptomic level. Methods. We assembled and annotated transcriptomes of the Qiufeng (susceptible to infection) and QiufengN (resistant to infection) strains and performed comparative analysis in order to decipher transcriptomic changes and related genes with potential functions against BmNPV infection. Results. A total of 78,408 SNPs were identified in the Qiufeng strain of silkworm and 56,786 SNPs were identified in QiufengN strain. Besides, novel AS events were found in these 2 strains. In addition, 1,728 DEGs were identified in the QiufengN strain compared with Qiufeng strain. These DEGs were involved in GO terms related to membrane, metabolism, binding and catalytic activity, cellular processes, and organismal systems. The highest levels of gene representation were found in oxidative phosphorylation, phagosome, TCA cycle, arginine and proline metabolism, and pyruvate metabolism. Additionally, COG analysis indicated that DEGs were involved in "amino acid transport and metabolism" and "carbohydrate transport and metabolism." Conclusion. We identified a series of major pathological changes in silkworm following infection and several functions were related to the antiviral mechanisms of silkworm. PMID:27195279

  10. The effects of BmNPV on biochemical changes in primary cultures of Bombyx mori embryonic tissue.

    Science.gov (United States)

    Matindoost, Leila; Sendi, Jalal Jalali; Soleimanjahi, Hoorieh; Etebari, Kayvan; Rahbarizade, Fateme

    2008-01-01

    The effect of Bombyx mori nuclear polyhedrosis virus (BmNPV) on biochemical changes of TC-100 medium containing 10% fetal bovine serum (FBS) in embryonic primary cultures of silkworm was investigated. The primary cultures that reached 60% confluence were infected by 0.5, 1, and 2-ml viral inoculums (diluted with TC-100 medium representing multiplicity of infection (MOI) of 0.25, 0.5, and 1). Glucose, uric acid, urea, total protein, cholesterol, and alkaline phosphatase were measured in the medium of BmNPV-infected primary cultures. All biochemical compounds showed significant changes. Glucose decreased considerably by about 55 mg/ml, while different concentrations of the virus inoculums did not demonstrate significant differences among them. Total protein had only increased in 2 ml concentration and there were no changes in other concentrations. Uric acid as a by-product accumulated dramatically in all concentrations, while the amount of urea reduced in all treatments and this reduction was more evident in lower concentrations. Cholesterol consumption was high in cultures postinfection, while alkaline phosphatase (ALP) activity decreased in infected cells. PMID:18288542

  11. Improvement of LysM-Mediated Surface Display of Designed Ankyrin Repeat Proteins (DARPins) in Recombinant and Nonrecombinant Strains of Lactococcus lactis and Lactobacillus Species

    OpenAIRE

    Zadravec, Petra; Štrukelj, Borut; Berlec, Aleš

    2015-01-01

    Safety and probiotic properties make lactic acid bacteria (LAB) attractive hosts for surface display of heterologous proteins. Protein display on nonrecombinant microorganisms is preferred for therapeutic and food applications due to regulatory requirements. We displayed two designed ankyrin repeat proteins (DARPins), each possessing affinity for the Fc region of human IgG, on the surface of Lactococcus lactis by fusing them to the Usp45 secretion signal and to the peptidoglycan-binding C ter...

  12. Expression of Recombinant Antibodies

    OpenAIRE

    Frenzel, André; Hust, Michael; Schirrmann, Thomas

    2013-01-01

    Recombinant antibodies are highly specific detection probes in research, diagnostics, and have emerged over the last two decades as the fastest growing class of therapeutic proteins. Antibody generation has been dramatically accelerated by in vitro selection systems, particularly phage display. An increasing variety of recombinant production systems have been developed, ranging from Gram-negative and positive bacteria, yeasts and filamentous fungi, insect cell lines, mammalian cells to transg...

  13. Auditory Display

    DEFF Research Database (Denmark)

    volume. The conference's topics include auditory exploration of data via sonification and audification; real time monitoring of multivariate date; sound in immersive interfaces and teleoperation; perceptual issues in auditory display; sound in generalized computer interfaces; technologies supporting...

  14. Display hardware

    International Nuclear Information System (INIS)

    To appreciate the limitations and possibilities of computer graphics it is necessary to have some acquaintance with the available technology. The aim of this chapter is to mention briefly the different display types and their 'ball-park' price ranges. It must be stressed that prices change rapidly, and so those quoted here are only intended to give an idea of the cost at the time of writing.

  15. Mucosal vaccination with recombinant Lactobacillus casei-displayed CTA1-conjugated consensus matrix protein-2 (sM2) induces broad protection against divergent influenza subtypes in BALB/c mice.

    Science.gov (United States)

    Chowdhury, Mohammed Y E; Li, Rui; Kim, Jae-Hoon; Park, Min-Eun; Kim, Tae-Hwan; Pathinayake, Prabuddha; Weeratunga, Prasanna; Song, Man Ki; Son, Hwa-Young; Hong, Seung-Pyo; Sung, Moon-Hee; Lee, Jong-Soo; Kim, Chul-Joong

    2014-01-01

    To develop a safe and effective mucosal vaccine against pathogenic influenza viruses, we constructed recombinant Lactobacillus casei strains that express conserved matrix protein 2 with (pgsA-CTA1-sM2/L. casei) or without (pgsA-sM2/L. casei) cholera toxin subunit A1 (CTA1) on the surface. The surface localization of the fusion protein was verified by cellular fractionation analyses, flow cytometry and immunofluorescence microscopy. Oral and nasal inoculations of recombinant L. casei into mice resulted in high levels of serum immunoglobulin G (IgG) and mucosal IgA. However, the conjugation of cholera toxin subunit A1 induced more potent mucosal, humoral and cell-mediated immune responses. In a challenge test with 10 MLD50 of A/EM/Korea/W149/06(H5N1), A/Puerto Rico/8/34(H1N1), A/Aquatic bird /Korea/W81/2005(H5N2), A/Aquatic bird/Korea/W44/2005(H7N3), and A/Chicken/Korea/116/2004(H9N2) viruses, the recombinant pgsA-CTA1-sM2/L. casei provided better protection against lethal challenges than pgsA-sM2/L. casei, pgsA/L. casei and PBS in mice. These results indicate that mucosal immunization with recombinant L. casei expressing CTA1-conjugated sM2 protein on its surface is an effective means of eliciting protective immune responses against diverse influenza subtypes. PMID:24714362

  16. Mucosal Vaccination with Recombinant Lactobacillus casei-Displayed CTA1-Conjugated Consensus Matrix Protein-2 (sM2) Induces Broad Protection against Divergent Influenza Subtypes in BALB/c Mice

    Science.gov (United States)

    Chowdhury, Mohammed Y. E.; Li, Rui; Kim, Jae-Hoon; Park, Min-Eun; Kim, Tae-Hwan; Pathinayake, Prabuddha; Weeratunga, Prasanna; Song, Man Ki; Son, Hwa-Young; Hong, Seung-Pyo; Sung, Moon-Hee; Lee, Jong-Soo; Kim, Chul-Joong

    2014-01-01

    To develop a safe and effective mucosal vaccine against pathogenic influenza viruses, we constructed recombinant Lactobacillus casei strains that express conserved matrix protein 2 with (pgsA-CTA1-sM2/L. casei) or without (pgsA-sM2/L. casei) cholera toxin subunit A1 (CTA1) on the surface. The surface localization of the fusion protein was verified by cellular fractionation analyses, flow cytometry and immunofluorescence microscopy. Oral and nasal inoculations of recombinant L. casei into mice resulted in high levels of serum immunoglobulin G (IgG) and mucosal IgA. However, the conjugation of cholera toxin subunit A1 induced more potent mucosal, humoral and cell-mediated immune responses. In a challenge test with 10 MLD50 of A/EM/Korea/W149/06(H5N1), A/Puerto Rico/8/34(H1N1), A/Aquatic bird /Korea/W81/2005(H5N2), A/Aquatic bird/Korea/W44/2005(H7N3), and A/Chicken/Korea/116/2004(H9N2) viruses, the recombinant pgsA-CTA1-sM2/L. casei provided better protection against lethal challenges than pgsA-sM2/L. casei, pgsA/L. casei and PBS in mice. These results indicate that mucosal immunization with recombinant L. casei expressing CTA1-conjugated sM2 protein on its surface is an effective means of eliciting protective immune responses against diverse influenza subtypes. PMID:24714362

  17. Universal Numeric Segmented Display

    CERN Document Server

    Azad, Md Abul kalam; Kamruzzaman, S M

    2010-01-01

    Segmentation display plays a vital role to display numerals. But in today's world matrix display is also used in displaying numerals. Because numerals has lots of curve edges which is better supported by matrix display. But as matrix display is costly and complex to implement and also needs more memory, segment display is generally used to display numerals. But as there is yet no proposed compact display architecture to display multiple language numerals at a time, this paper proposes uniform display architecture to display multiple language digits and general mathematical expressions with higher accuracy and simplicity by using a 18-segment display, which is an improvement over the 16 segment display.

  18. Understanding display blindness in future display deployments

    OpenAIRE

    Memarovic, Nemanja; Clinch, Sarah; Alt, Florian

    2015-01-01

    Digital displays are heralded as a transformative medium for communication. However, a known challenge in the domain is that of display blindness in which passersby pay little or no attention to public displays. This phenomenon has been a major motivation for much of the research on public displays. However, since the early observations, little has been done to develop our understanding of display blindness – for example, to identify determining factors or propose appropriate metrics. Hence, ...

  19. Efficient construct of a large and functional scFv yeast display library derived from the ascites B cells of ovarian cancer patients by three-fragment transformation-associated recombination.

    Science.gov (United States)

    Yuan, Xiaopeng; Chen, Xiang; Yang, Mingjuan; Hu, Jia; Yang, Wei; Chen, Tingtao; Wang, Qirui; Zhang, Xuhua; Lin, Ruihe; Zhao, Aizhi

    2016-05-01

    Over the past decade, yeast display technology has emerged as a powerful tool for the isolation of high-affinity immunoglobulin fragments with potential utility as clinical diagnostic and therapeutic reagents. Despite significant refinement of the various methodologies underpinning library construction and selections, certain aspects remain challenging and process limiting. We have sought to significantly improve the robustness of the single-chain Fv (scFv) library construction step by overcoming the technical inefficiencies frequently encountered during the PCR-mediated assembly of scFvs from the discrete heavy and light V-domain repertoires. Using a novel primer set designed to provide maximum amplification coverage of the known germ-line V-domain repertoire, we have exploited the potential of the in vivo homologous gap-repair apparatus of Saccharomyces cerevisiae to assemble intact scFvs directly from co-transformed PBMC-derived VH, VL, and linearized vector component fragments. We have successfully applied this three-fragment assembly strategy to construct a large (>10(9)) scFv yeast display library from the ascites immune repertoire of ovarian cancer patients and validated the approach by applying FACS-based sorting to readily isolate scFvs that recognize various tumor marker antigens (TMAs). It is expected that this simplified construction method may find general utility, both for de novo scFv library construction and for subsequent combinatorial affinity maturation manipulations that require more than two fragments. PMID:26782745

  20. Human Gut-Commensalic Lactobacillus ruminis ATCC 25644 Displays Sortase-Assembled Surface Piliation: Phenotypic Characterization of Its Fimbrial Operon through In Silico Predictive Analysis and Recombinant Expression in Lactococcus lactis.

    Directory of Open Access Journals (Sweden)

    Xia Yu

    Full Text Available Sortase-dependent surface pili (or fimbriae in Gram-positive bacteria are well documented as a key virulence factor for certain harmful opportunistic pathogens. However, it is only recently known that these multi-subunit protein appendages are also belonging to the "friendly" commensals and now, with this new perspective, they have come to be categorized as a niche-adaptation factor as well. In this regard, it was shown earlier that sortase-assembled piliation is a native fixture of two human intestinal commensalics (i.e., Lactobacillus rhamnosus and Bifidobacterium bifidum, and correspondingly where the pili involved have a significant role in cellular adhesion and immunomodulation processes. We now reveal that intestinal indigenous (or autochthonous Lactobacillus ruminis is another surface-piliated commensal lactobacillar species. Heeding to in silico expectations, the predicted loci for the LrpCBA-called pili are organized tandemly in the L. ruminis genome as a canonical fimbrial operon, which then encodes for three pilin-proteins and a single C-type sortase enzyme. Through electron microscopic means, we showed that these pilus formations are a surface assemblage of tip, basal, and backbone pilin subunits (respectively named LrpC, LrpB, and LrpA in L. ruminis, and also when expressed recombinantly in Lactococcus lactis. As well, by using the recombinant-piliated lactococci, we could define certain ecologically relevant phenotypic traits, such as the ability to adhere to extracellular matrix proteins and gut epithelial cells, but also to effectuate an induced dampening on Toll-like receptor 2 signaling and interleukin-8 responsiveness in immune-related cells. Within the context of the intestinal microcosm, by wielding such niche-advantageous cell-surface properties the LrpCBA pilus would undoubtedly have a requisite functional role in the colonization dynamics of L. ruminis indigeneity. Our study provides only the second description of a

  1. Understanding Display Blindness in Future Display Deployments

    OpenAIRE

    Memarovic, Nemanja; Clinch, Sarah; Alt, Florian

    2015-01-01

    Digital displays are heralded as a transformative medium for communication. However, a known challenge in the domain is that of display blindness in which passersby pay little or no attention to public displays. This phenomenon has been a major motivation for much of the research on public dis- plays. However, since the early observations, little has been done to develop our understanding of display blindness – for example, to identify determining factors or propose appro- priate metrics. Hen...

  2. Displaying gray shades in liquid crystal displays

    Indian Academy of Sciences (India)

    T N Ruckmongathan

    2003-08-01

    Quality of image in a display depends on the contrast, colour, resolution and the number of gray shades. A large number of gray shades is necessary to display images without any contour lines. These contours are due to limited number of gray shades in the display causing abrupt changes in grayness of the image, while the original image has a gradual change in brightness. Amplitude modulation has the capability to display a large number of gray shades with minimum number of time intervals [1,2]. This paper will cover the underlying principle of amplitude modulation, some variants and its extension to multi-line addressing. Other techniques for displaying gray shades in passive matrix displays are reviewed for the sake of comparison.

  3. Invisible Display in Aluminum

    DEFF Research Database (Denmark)

    Prichystal, Jan Phuklin; Hansen, Hans Nørgaard; Bladt, Henrik Henriksen

    2005-01-01

    integrated display in a metal surface is often ruled by design and functionality of a product. The integration of displays in metal surfaces requires metal removal in order to clear the area of the display to some extent. The idea behind an invisible display in Aluminum concerns the processing of a metal...

  4. Developments in organic displays

    Directory of Open Access Journals (Sweden)

    John K. Borchardt

    2004-09-01

    Full Text Available Rapid advances in materials and manufacturing technology are making organic light-emitting diodes (OLEDs the leading technology for a new generation of thinner, lighter, higher-resolution displays for computers, televisions, and small hand-held devices. In addition, OLEDs could enable the development of new display applications including flexible plastic display devices, displays embedded into clothes or wall hangings, and even head-mounted displays.

  5. Ice nucleation protein as a bacterial surface display protein

    OpenAIRE

    Sarhan Mohammed A.A.

    2011-01-01

    Surface display technology can be defined as that phenotype (protein or peptide) which is linked to a genotype (DNA or RNA) through an appropriate anchoring motif. A bacterial surface display system is based on expressing recombinant proteins fused to sorting signals (anchoring motifs) that direct their incorporation on the cell surface.

  6. Handbook of display technology

    CERN Document Server

    Castellano, Joseph A

    1992-01-01

    This book presents a comprehensive review of technical and commercial aspects of display technology. It provides design engineers with the information needed to select proper technology for new products. The book focuses on flat, thin displays such as light-emitting diodes, plasma display panels, and liquid crystal displays, but it also includes material on cathode ray tubes. Displays include a large number of products from televisions, auto dashboards, radios, and household appliances, to gasoline pumps, heart monitors, microwave ovens, and more.For more information on display tech

  7. Production of recombinant human DNA polymerase delta in a Bombyx mori bioreactor.

    Science.gov (United States)

    Zhou, Yajing; Chen, Huiqing; Li, Xiao; Wang, Yujue; Chen, Keping; Zhang, Sufang; Meng, Xiao; Lee, Ernest Y C; Lee, Marietta Y W T

    2011-01-01

    Eukaryotic DNA polymerase δ (pol δ) plays a crucial role in chromosomal DNA replication and various DNA repair processes. It is thought to consist of p125, p66 (p68), p50 and p12 subunits. However, rigorous isolation of mammalian pol δ from natural sources has usually yielded two-subunit preparations containing only p125 and p50 polypeptides. While recombinant pol δ isolated from infected insect cells have some problems of consistency in the quality of the preparations, and the yields are much lower. To address these deficiencies, we have constructed recombinant BmNPV baculoviruses using MultiBac system. This method makes the generation of recombinant forms of pol δ containing mutations in any one of the subunits or combinations thereof extremely facile. From about 350 infected larvae, we obtained as much as 4 mg of pol δ four-subunit complex. Highly purified enzyme behaved like the one of native form by rigorous characterization and comparison of its activities on poly(dA)/oligo(dT) template-primer and singly primed M13 DNA, and its homogeneity on FPLC gel filtration. In vitro base excision repair (BER) assays showed that pol δ plays a significant role in uracil-intiated BER and is more likely to mediate LP BER, while the trimer lacking p12 is more likely to mediate SN BER. It seems likely that loss of p12 modulates the rate of SN BER and LP BER during the repair process. Thus, this work provides a simple, fast, reliable and economic way for the large-scale production of human DNA polymerase δ with a high activity and purity, setting up a new platform for our further research on the biochemical properties of pol δ, its regulation and the integration of its functions, and how alterations in pol δ function could contribute to the etiology of human cancer or other diseases that can result from loss of genomic stability. PMID:21789240

  8. A Compressive Superresolution Display

    KAUST Repository

    Heide, Felix

    2014-06-22

    In this paper, we introduce a new compressive display architecture for superresolution image presentation that exploits co-design of the optical device configuration and compressive computation. Our display allows for superresolution, HDR, or glasses-free 3D presentation.

  9. Management of Pervasive Displays

    OpenAIRE

    Tatiraju, Venkata

    2015-01-01

    Traditional signage is being replaced by digital displays that are directly connected to the Internet and show content from the cloud. These displays increasingly rely on a standard web-browser and HTML5 technologies for rendering rich media content. As the number of these displays increase, it is critical to provide user-friendly and efficient solutions for managing them remotely from the cloud. The remote management of such displays traditionally relies on proprietary native software soluti...

  10. Liquid crystal display

    International Nuclear Information System (INIS)

    An improved liquid crystal display device is described which can display letters, numerals and other necessary patterns in the night time using a minimized amount of radioactive material. To achieve this a self-luminous light source is placed in a limited region corresponding to a specific display area. (U.K.)

  11. Cytoplasmic bacteriophage display system

    Science.gov (United States)

    Studier, F.W.; Rosenberg, A.H.

    1998-06-16

    Disclosed are display vectors comprising DNA encoding a portion of a structural protein from a cytoplasmic bacteriophage, joined covalently to a protein or peptide of interest. Exemplified are display vectors wherein the structural protein is the T7 bacteriophage capsid protein. More specifically, in the exemplified display vectors the C-terminal amino acid residue of the portion of the capsid protein is joined to the N-terminal residue of the protein or peptide of interest. The portion of the T7 capsid protein exemplified comprises an N-terminal portion corresponding to form 10B of the T7 capsid protein. The display vectors are useful for high copy number display or lower copy number display (with larger fusion). Compositions of the type described herein are useful in connection with methods for producing a virus displaying a protein or peptide of interest. 1 fig.

  12. Recombinant Technology and Probiotics

    Directory of Open Access Journals (Sweden)

    Icy D’Silva

    2011-09-01

    Full Text Available Recombinant technology has led the way to monumental advances in the development of useful molecules, including the development of safe probiotics. The development of novel approaches using recombinant technology and probiotics that allow accurate targeting of therapeutics to the mucosa is an interesting area of research. The creation and use of recombinant probiotics expressing recombinantovalbumin, recombinant ovalbumin mutants and yet-to-be-designed recombinant hypo/non-allergenic molecules offer the opportunity to further investigate their effects for food, nutrition, environment andhealth. This review highlights advances in native probiotics and recombinant probiotics expressing native and recombinant molecules for food, nutrition, environment and health.

  13. Display innovations through glass

    Science.gov (United States)

    Hamilton, Lori L.

    2016-03-01

    Prevailing trends in thin, lightweight, high-resolution, and added functionality, such as touch sensing, continue to drive innovation in the display market. While display volumes grow, so do consumers’ need for portability, enhanced optical performance, and mechanical reliability. Technical advancements in glass design and process have enabled display innovations in these areas while supporting industry growth. Opportunities for further innovation remain open for glass manufacturers to drive new applications, enhanced functionality, and increased demand.

  14. Scalable Resolution Display Walls

    KAUST Repository

    Leigh, Jason

    2013-01-01

    This article will describe the progress since 2000 on research and development in 2-D and 3-D scalable resolution display walls that are built from tiling individual lower resolution flat panel displays. The article will describe approaches and trends in display hardware construction, middleware architecture, and user-interaction design. The article will also highlight examples of use cases and the benefits the technology has brought to their respective disciplines. © 1963-2012 IEEE.

  15. Displaying Data As Movies

    Science.gov (United States)

    Moore, Judith G.

    1992-01-01

    NMSB Movie computer program displays large sets of data (more than million individual values). Presentation dynamic, rapidly displaying sequential image "frames" in main "movie" window. Any sequence of two-dimensional sets of data scaled between 0 and 255 (1-byte resolution) displayed as movie. Time- or slice-wise progression of data illustrated. Originally written to present data from three-dimensional ultrasonic scans of damaged aerospace composite materials, illustrates data acquired by thermal-analysis systems measuring rates of heating and cooling of various materials. Developed on Macintosh IIx computer with 8-bit color display adapter and 8 megabytes of memory using Symantec Corporation's Think C, version 4.0.

  16. JAVA Stereo Display Toolkit

    Science.gov (United States)

    Edmonds, Karina

    2008-01-01

    This toolkit provides a common interface for displaying graphical user interface (GUI) components in stereo using either specialized stereo display hardware (e.g., liquid crystal shutter or polarized glasses) or anaglyph display (red/blue glasses) on standard workstation displays. An application using this toolkit will work without modification in either environment, allowing stereo software to reach a wider audience without sacrificing high-quality display on dedicated hardware. The toolkit is written in Java for use with the Swing GUI Toolkit and has cross-platform compatibility. It hooks into the graphics system, allowing any standard Swing component to be displayed in stereo. It uses the OpenGL graphics library to control the stereo hardware and to perform the rendering. It also supports anaglyph and special stereo hardware using the same API (application-program interface), and has the ability to simulate color stereo in anaglyph mode by combining the red band of the left image with the green/blue bands of the right image. This is a low-level toolkit that accomplishes simply the display of components (including the JadeDisplay image display component). It does not include higher-level functions such as disparity adjustment, 3D cursor, or overlays all of which can be built using this toolkit.

  17. Helmet-Mounted Displays (HMD)

    Data.gov (United States)

    Federal Laboratory Consortium — The Helmet-Mounted Display labis responsible for monocular HMD day display evaluations; monocular HMD night vision performance processes; binocular HMD day display...

  18. Visual merchandising window display

    Directory of Open Access Journals (Sweden)

    Opris (Cas. Stanila M.

    2013-12-01

    Full Text Available Window display plays a major part in the selling strategies; it does not only include the simple display of goods, nowadays it is a form of art, also having the purpose of sustaining the brand image. This article wants to reveal the tools that are essential in creating a fabulous window display. Being a window designer is not an easy job, you have to always think ahead trends, to have a sense of colour, to know how to use light to attract customers in the store after only one glance at the window. The big store window displays are theatre scenes: with expensive backgrounds, special effects and high fashion mannequins. The final role of the displays is to convince customers to enter the store and trigger the purchasing act which is the final goal of the retail activity.

  19. Defense display market assessment

    Science.gov (United States)

    Desjardins, Daniel D.; Hopper, Darrel G.

    1998-09-01

    This paper addresses the number, function and size of principal military displays and establishes a basis to determine the opportunities for technology insertion in the immediate future and into the next millennium. Principal military displays are defined as those occupying appreciable crewstation real-estate and/or those without which the platform could not carry out its intended mission. DoD 'office' applications are excluded from this study. The military displays market is specified by such parameters as active area and footprint size, and other characteristics such as luminance, gray scale, resolution, angle, color, video capability, and night vision imaging system (NVIS) compatibility. Funded, future acquisitions, planned and predicted crewstation modification kits, and form-fit upgrades are taken into account. This paper provides an overview of the DoD niche market, allowing both government and industry a necessary reference by which to meet DoD requirements for military displays in a timely and cost-effective manner. The aggregate DoD market for direct-view and large-area military displays is presently estimated to be in excess of 242,000. Miniature displays are those which must be magnified to be viewed, involve a significantly different manufacturing paradigm and are used in helmet mounted displays and thermal weapon sight applications. Some 114,000 miniature displays are presently included within Service weapon system acquisition plans. For vendor production planning purposes it is noted that foreign military sales could substantially increase these quantities. The vanishing vendor syndrome (VVS) for older display technologies continues to be a growing, pervasive problem throughout DoD, which consequently must leverage the more modern display technologies being developed for civil- commercial markets.

  20. Large holographic displays as an alternative to stereoscopic displays

    Science.gov (United States)

    Häussler, R.; Schwerdtner, A.; Leister, N.

    2008-02-01

    3D displays comprise stereoscopic displays and holographic displays. Eye convergence and accommodation are important depth cues for human vision. Stereoscopic displays provide only convergence information whereas holographic displays also provide accommodation information. Due to the inherently better 3D quality we consider holographic displays as the preferred alternative to stereoscopic displays. Our new approach to holographic displays omits unnecessary wavefront information and significantly reduces the requirements on the resolution of the spatial light modulator and the computation effort compared to conventional holographic displays. We verified our concept with holographic display prototypes and measurements. SeeReal's approach makes holographic displays feasible as a consumer product for mass-market applications.

  1. Microlaser-based displays

    Science.gov (United States)

    Bergstedt, Robert; Fink, Charles G.; Flint, Graham W.; Hargis, David E.; Peppler, Philipp W.

    1997-07-01

    Laser Power Corporation has developed a new type of projection display, based upon microlaser technology and a novel scan architecture, which provides the foundation for bright, extremely high resolution images. A review of projection technologies is presented along with the limitations of each and the difficulties they experience in trying to generate high resolution imagery. The design of the microlaser based projector is discussed along with the advantage of this technology. High power red, green, and blue microlasers have been designed and developed specifically for use in projection displays. These sources, in combination with high resolution, high contrast modulator, produce a 24 bit color gamut, capable of supporting the full range of real world colors. The new scan architecture, which reduces the modulation rate and scan speeds required, is described. This scan architecture, along with the inherent brightness of the laser provides the fundamentals necessary to produce a 5120 by 4096 resolution display. The brightness and color uniformity of the display is excellent, allowing for tiling of the displays with far fewer artifacts than those in a traditionally tiled display. Applications for the display include simulators, command and control centers, and electronic cinema.

  2. Small - Display Cartography

    DEFF Research Database (Denmark)

    Nissen, Flemming; Hvas, Anders; Münster-Swendsen, Jørgen;

    This report comprises the work carried out in the work-package of small display cartography. The work-package has aimed at creating a general framework for the small-display cartography. A solid framework facilitates an increased use of spatial data in mobile devices - thus enabling, together with...... the rapidly evolving positioning techniques, a new category of position-dependent, map-based services to be introduced. The report consists of the following parts: Part I: Categorization of handheld devices, Part II: Cartographic design for small-display devices, Part III: Study on the GiMoDig Client...... ? Portal Service Communication and finally, Part IV: Concluding remarks and topics for further research on small-display cartography. Part II includes a separate Appendix D consisting of a cartographic design specification. Part III includes a separate Appendix C consisting of a schema specification, a...

  3. Stainless steel display evaluation

    Science.gov (United States)

    Hopper, Darrel G.; Meyer, Frederick M.; Longo, Sam J.; Trissell, Terry L.

    2007-04-01

    Active matrix organic light emitting diode (AMOLED) technology is one candidate to become a low power alternative in some applications to the currently dominant, active matrix liquid crystal display (AMLCD), technology. Furthermore, fabrication of the AMOLED on stainless steel (SS) foil rather than the traditional glass substrate, while presenting a set of severe technical challenges, opens up the potential for displays that are both lighter and less breakable. Also, transition to an SS foil substrate may enable rollable displays - large when used but small for stowage within gear already worn or carried or installed. Research has been initiated on AMOLED/SS technology and the first 320 x 240 color pixel 4-in. demonstration device has been evaluated in the AFRL Display Test and Evaluation Laboratory. Results of this evaluation are reported along with a research roadmap.

  4. ENERGY STAR Certified Displays

    Data.gov (United States)

    U.S. Environmental Protection Agency — Certified models meet all ENERGY STAR requirements as listed in the Version 6.0 ENERGY STAR Program Requirements for Displays that are effective as of June 1, 2013....

  5. Military display performance parameters

    Science.gov (United States)

    Desjardins, Daniel D.; Meyer, Frederick

    2012-06-01

    The military display market is analyzed in terms of four of its segments: avionics, vetronics, dismounted soldier, and command and control. Requirements are summarized for a number of technology-driving parameters, to include luminance, night vision imaging system compatibility, gray levels, resolution, dimming range, viewing angle, video capability, altitude, temperature, shock and vibration, etc., for direct-view and virtual-view displays in cockpits and crew stations. Technical specifications are discussed for selected programs.

  6. Flexible displays, rigid designs?

    DEFF Research Database (Denmark)

    Hornbæk, Kasper

    2015-01-01

    Rapid technological progress has enabled a wide range of flexible displays for computing devices, but the user experience--which we're only beginning to understand--will be the key driver for successful designs.......Rapid technological progress has enabled a wide range of flexible displays for computing devices, but the user experience--which we're only beginning to understand--will be the key driver for successful designs....

  7. Jet printing flexible displays

    Directory of Open Access Journals (Sweden)

    R.A. Street

    2006-04-01

    Full Text Available Jet printing is an interesting patterning technique for electronic devices because it requires no physical mask, has digital control of ejection, and provides good layer-to-layer registration. It also has the potential to reduce display manufacturing costs and enable roll-to-roll processing. The technique is illustrated with examples of prototype printed displays using amorphous silicon and polymer semiconductors.

  8. Recombinant DNA in Medicine

    OpenAIRE

    Cederbaum, Stephen D.; Fareed, George C.; Lovett, Michael A.; Shapiro, Larry J.

    1984-01-01

    Studies in bacteria and bacterial viruses have led to methods to manipulate and recombine DNA in unique and reproducible ways and to amplify these recombined molecules millions of times. Once properly identified, the recombinant DNA molecules can be used in various ways useful in medicine and human biology. There are many applications for recombinant DNA technology. Cloned complementary DNA has been used to produce various human proteins in microorganisms. Insulin and growth hormone have been...

  9. Improving baculovirus recombination

    OpenAIRE

    Zhao, Yuguang; Chapman, David A. G.; Jones, Ian M.

    2003-01-01

    Recombinant baculoviruses have established themselves as a favoured technology for the high-level expression of recombinant proteins. The construction of recombinant viruses, however, is a time consuming step that restricts consideration of the technology for high throughput developments. Here we use a targeted gene knockout technology to inactivate an essential viral gene that lies adjacent to the locus used for recombination. Viral DNA prepared from the knockout fails to initiate an infecti...

  10. Therapeutic Recombinant Monoclonal Antibodies

    Science.gov (United States)

    Bakhtiar, Ray

    2012-01-01

    During the last two decades, the rapid growth of biotechnology-derived techniques has led to a myriad of therapeutic recombinant monoclonal antibodies with significant clinical benefits. Recombinant monoclonal antibodies can be obtained from a number of natural sources such as animal cell cultures using recombinant DNA engineering. In contrast to…

  11. Photoionization and Recombination

    Science.gov (United States)

    Nahar, Sultana N.

    2000-01-01

    Theoretically self-consistent calculations for photoionization and (e + ion) recombination are described. The same eigenfunction expansion for the ion is employed in coupled channel calculations for both processes, thus ensuring consistency between cross sections and rates. The theoretical treatment of (e + ion) recombination subsumes both the non-resonant recombination ("radiative recombination"), and the resonant recombination ("di-electronic recombination") processes in a unified scheme. In addition to the total, unified recombination rates, level-specific recombination rates and photoionization cross sections are obtained for a large number of atomic levels. Both relativistic Breit-Pauli, and non-relativistic LS coupling, calculations are carried out in the close coupling approximation using the R-matrix method. Although the calculations are computationally intensive, they yield nearly all photoionization and recombination parameters needed for astrophysical photoionization models with higher precision than hitherto possible, estimated at about 10-20% from comparison with experimentally available data (including experimentally derived DR rates). Results are electronically available for over 40 atoms and ions. Photoionization and recombination of He-, and Li-like C and Fe are described for X-ray modeling. The unified method yields total and complete (e+ion) recombination rate coefficients, that can not otherwise be obtained theoretically or experimentally.

  12. The Ultimate Display

    CERN Document Server

    Fluke, C J

    2016-01-01

    Astronomical images and datasets are increasingly high-resolution and multi-dimensional. The vast majority of astronomers perform all of their visualisation and analysis tasks on low-resolution, two-dimensional desktop monitors. If there were no technological barriers to designing the ultimate stereoscopic display for astronomy, what would it look like? What capabilities would we require of our compute hardware to drive it? And are existing technologies even close to providing a true 3D experience that is compatible with the depth resolution of human stereoscopic vision? We consider the CAVE2 (an 80 Megapixel, hybrid 2D and 3D virtual reality environment directly integrated with a 100 Tflop/s GPU-powered supercomputer) and the Oculus Rift (a low- cost, head-mounted display) as examples at opposite financial ends of the immersive display spectrum.

  13. Recombineering Homologous Recombination Constructs in Drosophila

    OpenAIRE

    Carreira-Rosario, Arnaldo; Scoggin, Shane; Shalaby, Nevine A.; Williams, Nathan David; Hiesinger, P. Robin; Buszczak, Michael

    2013-01-01

    The continued development of techniques for fast, large-scale manipulation of endogenous gene loci will broaden the use of Drosophila melanogaster as a genetic model organism for human-disease related research. Recent years have seen technical advancements like homologous recombination and recombineering. However, generating unequivocal null mutations or tagging endogenous proteins remains a substantial effort for most genes. Here, we describe and demonstrate techniques for using recombineeri...

  14. Digital holographic display

    Science.gov (United States)

    Lee, Cheok Peng; Chia, Yong Poo; Singh, Vijay Raj; Asundi, A.; Khoo, Xuan Jie; Tay, Kiat Long; Zhou, Junxiang

    2010-03-01

    This paper describes how a Digital Holographic Projector is designed and implemented to project two-dimension virtual images onto the volumetric display media. In this research, we focus on the method to create 3D models, diffractive algorithm and the display media. A 3D model is generated based on the 360° view with views at every 10° interval from a 3D perspective view software. The hologram interference fringes are re-producing from the Fraunhofer algorithm. In order to make more flexible and portable, a Compact Vision System is introduced to storage multiply interference fringes. At the same time, the fringes are sent out at 30 Hz frame by frame continually to the digital micro-mirror1. With the presence of Nd: YVO4 green laser and various optical components, the 3D 360° hologram images are dynamically reconstructed and projected onto the high speed rotating diffuser forming a 3D model at any viewing angle on the volumetric display media. Both volumetric display media, wet and dry methods are demonstrated to show their feasibility and convenience. Finally, the dry volumetric technique with vertical projection mounting is adopted and as the result shown that the speckle noise is significance reduced.

  15. Document Management on Display.

    Science.gov (United States)

    Grimshaw, Anne

    1998-01-01

    Describes some of the products displayed at the United Kingdom's largest document management, imaging and workflow exhibition (Document 97, Birmingham, England, October 7-9, 1997). Includes recognition technologies; document delivery; scanning; document warehousing; document management and retrieval software; workflow systems; Internet software;…

  16. Fundamental study of recombination and recombineering in Escherichia coli

    OpenAIRE

    Sun, Xiaohang; Huang, Yang

    2008-01-01

    Recombination and recombineering systems have been used in Escherichia coli to recombinant DNA sequences. With endonuclease and DNA lipase the bacterial plasmid and target DNA fragment can bind together and recombinant for a new DNA sequences. Red Proteins have been used in recombineering system to perform the function as the enzymes in recombination system, and faster and easier than the other way of recombinant new DNA sequences in E.coli. In this report we get to know the pr...

  17. Tactile Displays with Parallel Mechanism

    OpenAIRE

    Kyung, Ki-Uk; Kwon, Dong-Soo

    2008-01-01

    This chapter deals with tactile displays and their mechanisms. We briefly reviewed research history of mechanical type tactile displays and their parallel arrangement. And this chapter mainly describes two systems including tactile displays. The 5x6 pin arrayed tactile display with parallel arrangement of piezoelectric bimorphs has been described in the section 3. The tactile display has been embedded into a mouse device and the performance of the device has been verified from pattern display...

  18. Unsolicited displays of insights

    DEFF Research Database (Denmark)

    Brouwer, Catherine E.

    2015-01-01

    This study is based on videorecorded interactional data from a specific type of institutional setting which consists of a variety of 'language stimulation activities' for bilingual children in Danish preschools. Bilingual children, with a variety of linguistic backgrounds, take part in these......) learning and contrasts it to the widely studied IRF/IRE pattern in educational contexts. The activities were videotaped, transcribed and analysed according to principles and procedures of Conversation Analysis.......: Unsolicited displays may lead to side sequences, they may lead to a shift in the main business of the talk, or they may be explicitly or implicitly ignored. The paper discusses whether and how these unsolicited displays of understanding then can be thought of as leading to opportunities for (language...

  19. Position display device

    International Nuclear Information System (INIS)

    Object: To provide a device capable of easily and quickly reading mutual mounting relations of control bodies such as control rods mounted on a nuclear reactor and positions to which the control bodies are driven. Structure: A scanning circuit is provided to scan positions of controllably mounted control bodies such as control rods. Values detected by scanning the positions are converted into character signals according to the values and converted into preranked color signals. The character signals and color signals are stored in a memory circuit by synchronous signals in synchronism with the scanning in the scanning circuit. Outputs of the memory circuit are displayed by a display unit such as a color Braun tube in accordance with the synchronous signals to provide color representations according to positions to which control bodies are driven in the same positional relation as the mounting of the control bodies. (Kamimura, M.)

  20. Refrigerated display cabinets; Butikskyla

    Energy Technology Data Exchange (ETDEWEB)

    Fahlen, Per

    2000-07-01

    This report summarizes experience from SP research and assignments regarding refrigerated transport and storage of food, mainly in the retail sector. It presents the fundamentals of heat and mass transfer in display cabinets with special focus on indirect systems and secondary refrigerants. Moreover, the report includes a brief account of basic food hygiene and the related regulations. The material has been compiled for educational purposes in the Masters program at Chalmers Technical University.

  1. Attention-Seeking Displays.

    Directory of Open Access Journals (Sweden)

    Szabolcs Számadó

    Full Text Available Animal communication abounds with extravagant displays. These signals are usually interpreted as costly signals of quality. However, there is another important function for these signals: to call the attention of the receiver to the signaller. While there is abundant empirical evidence to show the importance of this stage, it is not yet incorporated into standard signalling theory. Here I investigate a general model of signalling - based on a basic action-response game - that incorporates this searching stage. I show that giving attention-seeking displays and searching for them can be an ESS. This is a very general result and holds regardless whether only the high quality signallers or both high and low types give them. These signals need not be costly at the equilibrium and they need not be honest signals of any quality, as their function is not to signal quality but simply to call the attention of the potential receivers. These kind of displays are probably more common than their current weight in the literature would suggest.

  2. Attention-Seeking Displays.

    Science.gov (United States)

    Számadó, Szabolcs

    2015-01-01

    Animal communication abounds with extravagant displays. These signals are usually interpreted as costly signals of quality. However, there is another important function for these signals: to call the attention of the receiver to the signaller. While there is abundant empirical evidence to show the importance of this stage, it is not yet incorporated into standard signalling theory. Here I investigate a general model of signalling - based on a basic action-response game - that incorporates this searching stage. I show that giving attention-seeking displays and searching for them can be an ESS. This is a very general result and holds regardless whether only the high quality signallers or both high and low types give them. These signals need not be costly at the equilibrium and they need not be honest signals of any quality, as their function is not to signal quality but simply to call the attention of the potential receivers. These kind of displays are probably more common than their current weight in the literature would suggest. PMID:26287489

  3. Heterologous surface display on lactic acid bacteria: non-GMO alternative?

    Science.gov (United States)

    Zadravec, Petra; Štrukelj, Borut; Berlec, Aleš

    2015-01-01

    Lactic acid bacteria (LAB) are food-grade hosts for surface display with potential applications in food and therapy. Alternative approaches to surface display on LAB would avoid the use of recombinant DNA technology and genetically-modified organism (GMO)-related regulatory requirements. Non-covalent surface display of proteins can be achieved by fusing them to various cell-wall binding domains, of which the Lysine motif domain (LysM) is particularly well studied. Fusion proteins have been isolated from recombinant bacteria or from their growth medium and displayed on unmodified bacteria, enabling heterologous surface display. This was demonstrated on non-viable cells devoid of protein content, termed bacteria-like particles, and on various species of genus Lactobacillus. Of the latter, Lactobacillus salivarius ATCC 11741 was recently shown to be particularly amenable for LysM-mediated display. Possible regulatory implications of heterologous surface display are discussed, particularly those relevant for the European Union. PMID:25880164

  4. Production of recombinant antibodies using bacteriophages

    OpenAIRE

    Shukra, A. M.; Sridevi, N. V.; Dev Chandran,; Kapil Maithal,

    2014-01-01

    Recombinant antibody fragments such as Fab, scFv, diabodies, triabodies, single domain antibodies and minibodies have recently emerged as potential alternatives to monoclonal antibodies, which can be engineered using phage display technology. These antibodies match the strengths of conventionally produced monoclonal antibodies and offer advantages for the development of immunodiagnostic kits and assays. These fragments not only retain the specificity of the whole monoclonal ...

  5. Visual Perception and Holographic Displays

    International Nuclear Information System (INIS)

    Holographic displays have the potential to reproduce the natural parallax and focusing affordances of real scenes. Although holographic displays are still far from maturity, no other display technologies have the potential to reproduce these affordances as accurately. This paper reviews visual human-factors considerations for current and future holographic displays.

  6. Handbook of Visual Display Technology

    CERN Document Server

    Cranton, Wayne; Fihn, Mark

    2012-01-01

    The Handbook of Visual Display Technology is a unique work offering a comprehensive description of the science, technology, economic and human interface factors associated with the displays industry. An invaluable compilation of information, the Handbook will serve as a single reference source with expert contributions from over 150 international display professionals and academic researchers. All classes of display device are covered including LCDs, reflective displays, flexible solutions and emissive devices such as OLEDs and plasma displays, with discussion of established principles, emergent technologies, and particular areas of application. The wide-ranging content also encompasses the fundamental science of light and vision, image manipulation, core materials and processing techniques, display driving and metrology.

  7. Book Display as Adult Service

    Directory of Open Access Journals (Sweden)

    Matthew S. Moore

    1997-03-01

    Full Text Available 無Book display as an adult service is defined as choosing and positioning adult books from the collection to increase their circulation. The author contrasts bookstore arrangement for sales versus library arrangement for access. The paper considers the library-as-a-whole as a display, examines the right size for an in-library display, and discusses mass displays, end-caps, on-shelf displays, and the Tiffany approach. The author proposes that an effective display depends on an imaginative, unifying theme, and that book displays are part of the joy of libraries.

  8. Radiations from display devices

    International Nuclear Information System (INIS)

    45 display devices have been analyzed for X-ray emmission and for electrostatic - and low-frequency magnetic fields. 3 have been further analyzed for UV and visible light emmission. No emmissions above established risk levels have been found. For low-frequency magnetic fields very little is known of risks, so the levels have been compared with other commonly used devices. The measured levels correspond roughly to that which occur in the use of an electrical egg-beater, or a small hand electrical drill. Data are presented for the tested devices.(author)

  9. Touchscreen displays for military cockpits

    Science.gov (United States)

    Hoener, Steven J.; Hardy, Gregory J.

    1999-08-01

    To be successful, the implementation and mechanization of an infrared (IR) touchscreen display for military cockpit applications requires close attention to all aspects of integration, optics, display format design and system processing hardware and software. The F/A-18E/F program has incorporated a monochrome AMLCD touchscreen display into the cockpit to replace the mechanical pushbutton control panel. The new display provides the pilot with the versatility of a much more capable control panel and a new video display surface. This paper addresses the design considerations starting from concept development through integration and flight test, and finally to successful deployment of the Up- Front Control Display (UFCD) into production aircraft.

  10. Display Factors and Subjective Evaluation of Dynamic Text Display

    Science.gov (United States)

    So, Joey C. Y.; Chan, Alan H. S.

    2009-01-01

    Communications technology has exploded in past decades, leading to the question of which display method is the best to deliver electronic text messages. Many of these systems employ cathode ray tubes, liquid crystal displays, gas plasma displays, or light-emitting diodes as the output device. In order to overcome the limitations of screen size of the display units, numerous means of presenting dynamic display on screens have been invented. There are many factors that affect the readability of electronic text. This paper reviews some related empirical studies concerning the various display methods of dynamic text presentation, such as text display type, character type, text display direction, and text/background color combination, highlighting method and validity of highlighting. The subjective evaluation questionnaire is also discussed. According to the readability and preference ratings of the subjects given under different conditions, the best display method and color for comprehending the delivered messages were investigated. General recommendations of displaying dynamic information are made for the large display units which have been widely used for delivering important messages.

  11. 128-view autostereoscopic display

    Science.gov (United States)

    Huang, Junejei; Wang, Yuchang

    2015-09-01

    A 128-view auto-stereoscopic display using laser-scan and angle-magnifying screen is proposed. On the exit pupil of front projection lens, 8 spots of laser-scanning are provided. The exit pupil of the rear projection lens is doubled by two aperture-relay lenses and 8 spots of laser-scanning are doubled to 16 spots. The angle-magnifying screen comprises the main part of double-lenticular and the attaching part of micro-deflector. With the micro-deflector, angles formed by the laser scanning are deflected into eight angle ranges. With the double-lenticular, eight angle ranges incident into the screen are magnified into a large field of view for the observer. The laser scanning is realized by the vibration of Galvano-mirror that synchronizing with the frame rate of the DMD. For one cycle of vibration by the Galvo-mirror, 16 steps of reflections happen on going and returning paths. For each viewing position, 48 viewing per second are provided. The micro-deflector part comprises the (-4, +4) vertical micro-deflector and the (-1, -1, +1, +3) 45° micro-deflector. Each elements of the micro-deflector are aligned with the images of the pixels that come from the DMD. When a scanning of 16 spots passes different deflecting elements that cover 8 different pixels, the scanning is deflected to eight angle ranges and 128 partitioned viewing zones are formed in the observer plane.

  12. LHCb Event display

    CERN Document Server

    Trisovic, Ana

    2014-01-01

    The LHCb Event Display was made for educational purposes at the European Organization for Nuclear Research, CERN in Geneva, Switzerland. The project was implemented as a stand-alone application using C++ and ROOT, a framework developed by CERN for data analysis. This paper outlines the development and architecture of the application in detail, as well as the motivation for the development and the goals of the exercise. The application focuses on the visualization of events recorded by the LHCb detector, where an event represents a set of charged particle tracks in one proton-proton collision. Every particle track is coloured by its type and can be selected to see its essential information such as mass and momentum. The application allows students to save this information and calculate the invariant mass for any pair of particles. Furthermore, the students can use additional calculating tools in the application and build up a histogram of these invariant masses. The goal for the students is to find a $D^0$ par...

  13. Digital holography display (3)

    Science.gov (United States)

    Lee, Cheok Peng; Zheng, Huadong; Chia, Yong Poo; Cheng, Chee Yuen; Yu, Yang; Yu, Yingjie; Asundi, Anand

    2013-06-01

    This paper is to describe a color digital holographic projector and this system is comprised of RGB lasers, 3 units of Digital Micro-Mirror Device (DMD) and high speed rotating diffuser. In this research, we focused on colorings Digital holograms and synchronized RGB digital holograms versus rotated diffuser. To achieve this phenomenon, three of the holograms optical path need to be aligned to pass through a same beam splitter and eventually combined as one colored holograms output While, this colored hologram will be reconstructed on volumetric screen (rotated diffuser) at the floating manner in free space. To obtain these result 3 key factors is investigated: 1. To configured 1 master and 2 slaves digital micro mirror illumination time 2. To reconstructed holograms orientation angle diffuser versus rotating speed. 3. To synchronize rotating diffuser speed versus DMD frame-rate Last but not least, the team built a prototype Color Digital Holography Display but more developments are required to follow up such as, enhance system's reliability, robustness, compactness and 3D realistic images floating in the free air space.

  14. Construction of Recombinant Baculovirus Surface-Displayed the Capsid Protein of Porcine Circovirus Type 2%表面展示猪圆环病毒2型衣壳蛋白的重组杆状病毒的构建

    Institute of Scientific and Technical Information of China (English)

    程晓亮; 林文耀; 叶煜; 陈筱薇; 严常燕; 廖明; 樊惠英

    2011-01-01

    利用PCR方法扩增猪圆环病毒2型核定位信号区缺失的Cap蛋白基因,将其亚克隆入杆状病毒表面展示质粒pBACsurf-1的gp64信号肽和gp64成熟蛋白之间.将此融合片段亚克隆到质粒pcDNA3.1(+),获得重组质粒pcDNA3.1-gp64-dCap.然后将含有CMV启动子,gp64及dCap的基因片段克隆到杆状病毒转移质粒pFastBac-V,得到重组质粒pFastBac-dCap-V.然后将此转化DH10Bac感受态细胞,获得的重组穿梭质粒Bacmid-dCap-V,经脂质体转染St9细胞,获得重组杆状病毒Ac-dCap-V.该重组病毒感染Sf9细胞后可以产生典型的细胞病变,转导哺乳动物细胞后经间接免疫荧光试验证明,该重组杆状病毒成功转导哺乳动物细胞并表达dCap蛋白.%The open capsid(Cap)protein gene without nuclear localization signal (NLS) of porcine circo-virus 2(PCV2)was amplified by PCR and sub-cloned into pBACsurf-1 between the upstream gp64 signal sequence and downstresm gp64 mature domain. The fusion gene containing dCap and gp64 was inserted into pcDNA3.1 ( + ) to construct the recombinant plasmid pcDNA3. L-gp64-dCap. A fragment of the CMV promoter-gp64-dCap fusion gene cassette was excised from pcDNA3. L-gp64-dCap and inserted into the baculovirus transfer vector pFastBac-V to construct the recombinant plasmid pFastBac-dCap-V. It was followed by the transformation of plasmid into Escherichia coli DHlOBac competent cells to obtain the recombinant shuttle vector Bacmid-dCap-V. Eventually, the recombinant Bacmid was transfected into Sf9 cells to produce the recombinant baculovirus Ac-dCap-V using the LipofectamineTM 2000. The Sf9 cells produced cytopathic after infection of recombinant baculoviruses Ac-dCap-V. Indirect immunofluoresent assay demonstrated that the Ac-dCap-V efficiently transducted the mammalian cells in vitro and the dCap protein was expressed successfully.

  15. Display blocks: cubic displays for multi-perspective visualization

    OpenAIRE

    Pla i Conesa, Pol; Maes, Patricia

    2012-01-01

    We propose the design, implementation and evaluation of a set of tangible cubic displays. This novel approach to display technology consists of arranging six organic light emitting diode screens in a cubic form factor. We explore the possibilities that this type of display holds for data visualization, manipulation and exploration. We are especially interested in exploring how the physicality of the screen can be perceived as a cue to better interpret its contents. To this end, we propose a s...

  16. Regulation of Meiotic Recombination

    Energy Technology Data Exchange (ETDEWEB)

    Gregory p. Copenhaver

    2011-11-09

    Meiotic recombination results in the heritable rearrangement of DNA, primarily through reciprocal exchange between homologous chromosome or gene conversion. In plants these events are critical for ensuring proper chromosome segregation, facilitating DNA repair and providing a basis for genetic diversity. Understanding this fundamental biological mechanism will directly facilitate trait mapping, conventional plant breeding, and development of genetic engineering techniques that will help support the responsible production and conversion of renewable resources for fuels, chemicals, and the conservation of energy (1-3). Substantial progress has been made in understanding the basal recombination machinery, much of which is conserved in organisms as diverse as yeast, plants and mammals (4, 5). Significantly less is known about the factors that regulate how often and where that basal machinery acts on higher eukaryotic chromosomes. One important mechanism for regulating the frequency and distribution of meiotic recombination is crossover interference - or the ability of one recombination event to influence nearby events. The MUS81 gene is thought to play an important role in regulating the influence of interference on crossing over. The immediate goals of this project are to use reverse genetics to identify mutants in two putative MUS81 homologs in the model plant Arabidopsis thaliana, characterize those mutants and initiate a novel forward genetic screen for additional regulators of meiotic recombination. The long-term goal of the project is to understand how meiotic recombination is regulated in higher eukaryotes with an emphasis on the molecular basis of crossover interference. The ability to monitor recombination in all four meiotic products (tetrad analysis) has been a powerful tool in the arsenal of yeast geneticists. Previously, the qrt mutant of Arabidopsis, which causes the four pollen products of male meiosis to remain attached, was developed as a facile system

  17. Display Section Arrangement for Large Display Panel Design of SMART

    International Nuclear Information System (INIS)

    The Large Display Panel (LDP) can be viewed from anywhere in the Main Control Room (MCR) and its simplicity and fixed format makes plant status perceived at a glance. The LDP continuously displays spatially dedicated information that provides the status of the plants critical safety functions, plant operation mode, key operating parameters and status, trend display, etc. The LDP provides a common mental model of the plant to facilitate common plant visualization among all plant operational groups. This promotes a more effective communication process among plant personnel. The LDP consists of two major sections, Fixed Indication Section and Variable Display Section

  18. Advanced poly-LED displays

    Science.gov (United States)

    Childs, Mark; Nisato, Giovanni; Fish, D.; Giraldo, Andrea; Jenkins, A. J.; Johnson, Mark T.

    2003-05-01

    Philips have been actively developing polymer OLED (poly-LED) displays as a future display technology. Their emissive nature leads to a very attractive visual appearance, with wide viewing angle, high brightness and fast response speed. Whilst the first generation of poly-LED displays are likely to be passive-matrix driven, power reduction and resolution increase will lead to the use of active-matrix poly-LED displays. Philips Research have designed, fabricated and characterized five different designs of active-matrix polymer-LED display. Each of the five displays makes use of a distinct pixel programming- or pixel drive-technique, including current programming, threshold voltage measurement and photodiode feedback. It will be shown that hte simplest voltage-programmed current-source pixel suffers from potentially unacceptable brightness non-uniformity, and that advanced pixel circuits can provide a solution to this. Optical-feedback pixel circuits will be discussed, showing that they can be used to improve uniformity and compensate for image burn-in due to polymer-LED material degradation, improving display lifetime. Philips research has also been active in developing technologies required to implement poly-LED displays on flexible substrates, including materials, processing and testing methods. The fabrication of flexible passive-matrix poly-LED displays will be presented, as well as the ongoing work to assess the suitability of processing flexible next-generation poly-LED displays.

  19. Military display market segment: helicopters

    Science.gov (United States)

    Desjardins, Daniel D.; Hopper, Darrel G.

    2004-09-01

    The military display market is analyzed in terms of one of its segments: helicopter displays. Parameters requiring special consideration, to include luminance ranges, contrast ratio, viewing angles, and chromaticity coordinates, are examined. Performance requirements for rotary-wing displays relative to several premier applications are summarized. Display sizes having aggregate defense applications of 5,000 units or greater and having DoD applications across 10 or more platforms, are tabulated. The issue of size commonality is addressed where distribution of active area sizes across helicopter platforms, individually, in groups of two through nine, and ten or greater, is illustrated. Rotary-wing displays are also analyzed by technology, where total quantities of such displays are broken out into CRT, LCD, AMLCD, EM, LED, Incandescent, Plasma and TFEL percentages. Custom, versus Rugged commercial, versus commercial off-the-shelf designs are contrasted. High and low information content designs are identified. Displays for several high-profile military helicopter programs are discussed, to include both technical specifications and program history. The military display market study is summarized with breakouts for the helicopter market segment. Our defense-wide study as of March 2004 has documented 1,015,494 direct view and virtual image displays distributed across 1,181 display sizes and 503 weapon systems. Helicopter displays account for 67,472 displays (just 6.6% of DoD total) and comprise 83 sizes (7.0% of total DoD) in 76 platforms (15.1% of total DoD). Some 47.6% of these rotary-wing applications involve low information content displays comprising just a few characters in one color; however, as per fixed-wing aircraft, the predominant instantiation involves higher information content units capable of showing changeable graphics, color and video.

  20. Developing recombinant antibodies for biomarker detection

    Energy Technology Data Exchange (ETDEWEB)

    Baird, Cheryl L.; Fischer, Christopher J.; Pefaur, Noah B.; Miller, Keith D.; Kagen, Jacob; Srivastava, Sudhir; Rodland, Karin D.

    2010-10-01

    Monoclonal antibodies (mAbs) have an essential role in biomarker validation and diagnostic assays. A barrier to pursuing these applications is the reliance on immunization and hybridomas to produce mAbs, which is time-consuming and may not yield the desired mAb. We recommend a process flow for affinity reagent production that utilizes combinatorial protein display systems (eg, yeast surface display or phage display) rather than hybridomas. These systems link a selectable phenotype-binding conferred by an antibody fragment-with a means for recovering the encoding gene. Recombinant libraries obtained from immunizations can produce high-affinity antibodies (<10 nM) more quickly than other methods. Non-immune libraries provide an alternate route when immunizations are not possible, or when suitable mAbs are not recovered from an immune library. Directed molecular evolution (DME) is an integral part of optimizing mAbs obtained from combinatorial protein display, but can also be used on hybridoma-derived mAbs. Variants can easily be obtained and screened to increase the affinity of the parent mAb (affinity maturation). We discuss examples where DME has been used to tailor affinity reagents to specific applications. Combinatorial protein display also provides an accessible method for identifying antibody pairs, which are necessary for sandwich-type diagnostic assays.

  1. OLED displays for military applications

    Science.gov (United States)

    Mahon, Janice K.; Brown, Julie J.; Hack, Michael G.; Hewitt, Richard H.; Huffman, David C.

    2000-08-01

    Through the years, there has been a steady evolution of technology to ruggedize displays for harsh military environments. This work has spanned cathode-ray-tubes (CRTs) to present day active matrix liquid crystal displays (AMLCDs). Organic light emitting device (OLED) display technology has the potential to solve many of the inherent limitations of today's AMLCD technology and to provide the military system designer with a more cost effective solution. OLED technology offers bright, colorful emissive light with excellent power efficiency, wide viewing angle and video response rates; it is also demonstrating the requisite environmental robustness for a wide variety of display applications. OLED displays also have a very thin and lightweight form factor. Moreover, in full production, OLEDs are projected to be very cost-effective by comparison to AMLCDs. This paper will examine some of these advantages and the opportunities presented by the rapidly emerging OLED display technology for military applications.

  2. A model-based display

    International Nuclear Information System (INIS)

    A model-based display is identified, discussed, and illustrated. The model used in the display is based upon the Rankine Cycle, a heat engine cycle. Plant process data from the loss of main and auxiliary feedwater event at the Davis-Besse Plant on June 9, l985 is used to illustrate the display. The model used in the display fuses individual process variables into process functions. It also serves as a medium to communicate status of the process to human users. The human users may evaluate the goals of operation from the displayed process functions. Because of these display features, the user's cognitive workload is minimized. The opinions expressed herein are the author's personal ones and do not necessarily reflect criteria, requirements, and guidelines of the U.S. Nuclear Regulatory Commission

  3. Recombination in ionized gases

    International Nuclear Information System (INIS)

    In this paper it is shown how capture-stabilized methodology (both macroscopic and microscopic) can provide a generic basis for a unified treatment of all of the above recombination mechanisms. A new semiclassical theory of dissociative recombination is also presented in an effort to gain further insight into the physics not included in the first-order treatment and difficult to extract from numerical quantal treatments based on configuration mixing and on multichannel quantum defect theory. A simple analytical expression more accurate than the standard first-order result is obtained for the cross section σ and rate coefficient α. (author)

  4. Displays develop a new flexibility

    Directory of Open Access Journals (Sweden)

    Jin Jang

    2006-04-01

    Full Text Available Flexible displays are of great interest especially for mobile applications. Currently, there are no active-matrix flexible displays on the market, even though research has been carried out continuously over several years. Here, we introduce flexible displays and the prototype devices that have been developed. Organic thin-film transistors have been fabricated on plastic substrates for display backplanes. We describe the performance of our transistors made using a self-organization process. Finally, a set of research goals are outlined.

  5. Maintenance Procedure Display: Head Mounted Display (HMD) Evaluations

    Science.gov (United States)

    Whitmore, Milrian; Litaker, Harry L., Jr.; Solem, Jody A.; Holden, Kritina L.; Hoffman, Ronald R.

    2007-01-01

    A viewgraph presentation describing maintenance procedures for head mounted displays is shown. The topics include: 1) Study Goals; 2) Near Eye Displays (HMDs); 3) Design; 4) Phase I-Evaluation Methods; 5) Phase 1 Results; 6) Improved HMD Mounting; 7) Phase 2 -Evaluation Methods; 8) Phase 2 Preliminary Results; and 9) Next Steps.

  6. Updated defense display market assessment

    Science.gov (United States)

    Desjardins, Daniel D.; Hopper, Darrel G.

    1999-08-01

    This paper addresses the number, function and size of principal military displays and establishes a basis to determine the opportunities for technology insertion in the immediate future and into the next millennium. Principal military displays are defined as those occupying appreciable crewstation real-estate and/or those without which the platform could not carry out its intended mission. DoD 'office' applications are excluded from this study. The military displays market is specified by such parameters as active area and footprint size, and other characteristics such as luminance, gray scale, resolution, angle, color, video capability, and night vision imaging system compatibility. Funded, future acquisitions, planned and predicted crewstation modification kits, and form-fit upgrades are taken into account. This paper provides an overview of the DoD niche market, allowing both government and industry a necessary reference by which to meet DoD requirements for military displays in a timely and cost-effective manner. The aggregate DoD installed base for direct-view and large-area military displays is presently estimated to be in excess of 313,000. Miniature displays are those which must be magnified to be viewed, involve a significantly different manufacturing paradigm and are used in helmet mounted displays and thermal weapon sight applications. Some 114,000 miniature displays are presently included within future weapon system acquisition plans. For vendor production planning purposes it is noted that foreign military sales could substantially increase these quantities. The vanishing vendor syndrome (VVS) for older display technologies continues to be a growing, pervasive problem throughout DoD, which consequently must leverage the more modern, especially flat panel, display technologies being developed to replace older, especially cathode ray tube, technology for civil-commercial markets. Total DoD display needs (FPD, HMD) are some 427,000.

  7. Recombinant DNA for Teachers.

    Science.gov (United States)

    Duvall, James G., III

    1992-01-01

    A science teacher describes his experience at a workshop to learn to teach the Cold Spring Harbor DNA Science Laboratory Protocols. These protocols lead students through processes for taking E. coli cells and transforming them into a new antibiotic resistant strain. The workshop featured discussions of the role of DNA recombinant technology in…

  8. Recombineering Pseudomonas syringae

    Science.gov (United States)

    Here we report the identification of functions that promote genomic recombination of linear DNA introduced into Pseudomonas cells by electroporation. The genes encoding these functions were identified in Pseudomonas syringae pv. syringae B728a based on similarity to the lambda Red Exo/Beta and RecE...

  9. Full-color hybrid display

    Science.gov (United States)

    Chase, W. D.

    1977-01-01

    System presents realistic and properly proportioned image of runway with its associated lights as it appears at dusk or at night. Display employs high resolution cathode ray tube and color wheel to produce colored lights from computer generated signals. Lights are then superimposed on conventional television display of runway.

  10. Flexible Bistable Cholesteric Reflective Displays

    Science.gov (United States)

    Yang, Deng-Ke

    2006-03-01

    Cholesteric liquid crystals (ChLCs) exhibit two stable states at zero field condition-the reflecting planar state and the nonreflecting focal conic state. ChLCs are an excellent candidate for inexpensive and rugged electronic books and papers. This paper will review the display cell structure,materials and drive schemes for flexible bistable cholesteric (Ch) reflective displays.

  11. Phage Display for the Generation of Antibodies for Proteome Research, Diagnostics and Therapy

    Directory of Open Access Journals (Sweden)

    Michael Hust

    2011-01-01

    Full Text Available Twenty years after its development, antibody phage display using filamentous bacteriophage represents the most successful in vitro antibody selection technology. Initially, its development was encouraged by the unique possibility of directly generating recombinant human antibodies for therapy. Today, antibody phage display has been developed as a robust technology offering great potential for automation. Generation of monospecific binders provides a valuable tool for proteome research, leading to highly enhanced throughput and reduced costs. This review presents the phage display technology, application areas of antibodies in research, diagnostics and therapy and the use of antibody phage display for these applications.

  12. Flat panel display - Impurity doping technology for flat panel displays

    International Nuclear Information System (INIS)

    Features of the flat panel displays (FPDs) such as liquid crystal display (LCD) and organic light emitting diode (OLED) display, etc. using low temperature poly-Si (LTPS) thin film transistors (TFTs) are briefly reviewed comparing with other FPDs. The requirements for fabricating TFTs used for high performance FPDs and system on glass (SoG) are addressed. This paper focuses on the impurity doping technology, which is one of the key technologies together with crystallization by laser annealing, formation of high quality gate insulator and gate-insulator/poly-Si interface. The issues to be solved in impurity doping technology for state of the art and future TFTs are clarified

  13. Flat panel display - Impurity doping technology for flat panel displays

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, Toshiharu [Advanced Technology Planning, Sumitomo Eaton Nova Corporation, SBS Tower 9F, 10-1, Yoga 4-chome, Setagaya-ku, 158-0097 Tokyo (Japan)]. E-mail: suzuki_tsh@senova.co.jp

    2005-08-01

    Features of the flat panel displays (FPDs) such as liquid crystal display (LCD) and organic light emitting diode (OLED) display, etc. using low temperature poly-Si (LTPS) thin film transistors (TFTs) are briefly reviewed comparing with other FPDs. The requirements for fabricating TFTs used for high performance FPDs and system on glass (SoG) are addressed. This paper focuses on the impurity doping technology, which is one of the key technologies together with crystallization by laser annealing, formation of high quality gate insulator and gate-insulator/poly-Si interface. The issues to be solved in impurity doping technology for state of the art and future TFTs are clarified.

  14. BES monitoring and displaying system

    International Nuclear Information System (INIS)

    BES Monitoring and Displaying System (BESMDS) is projected to monitor and display the running status of DAQ and Slow Control systems of BES through the Web for worldwide accessing. It provides a real-time remote means of monitoring as well as an approach to study the environmental influence upon physical data taking. The system collects real-time data separately from BES Online subsystems by network sockets and stores the data into a database. People can access the system through its web site, which retrieves data on request from the database and can display results in dynamically reacted images. Its web address is http://besmds.ihep.ac.cn/

  15. Texture-Based Correspondence Display

    Science.gov (United States)

    Gerald-Yamasaki, Michael

    2004-01-01

    Texture-based correspondence display is a methodology to display corresponding data elements in visual representations of complex multidimensional, multivariate data. Texture is utilized as a persistent medium to contain a visual representation model and as a means to create multiple renditions of data where color is used to identify correspondence. Corresponding data elements are displayed over a variety of visual metaphors in a normal rendering process without adding extraneous linking metadata creation and maintenance. The effectiveness of visual representation for understanding data is extended to the expression of the visual representation model in texture.

  16. Recombinant influenza vaccines.

    Science.gov (United States)

    Sedova, E S; Shcherbinin, D N; Migunov, A I; Smirnov, Iu A; Logunov, D Iu; Shmarov, M M; Tsybalova, L M; Naroditskiĭ, B S; Kiselev, O I; Gintsburg, A L

    2012-10-01

    This review covers the problems encountered in the construction and production of new recombinant influenza vaccines. New approaches to the development of influenza vaccines are investigated; they include reverse genetics methods, production of virus-like particles, and DNA- and viral vector-based vaccines. Such approaches as the delivery of foreign genes by DNA- and viral vector-based vaccines can preserve the native structure of antigens. Adenoviral vectors are a promising gene-delivery platform for a variety of genetic vaccines. Adenoviruses can efficiently penetrate the human organism through mucosal epithelium, thus providing long-term antigen persistence and induction of the innate immune response. This review provides an overview of the practicability of the production of new recombinant influenza cross-protective vaccines on the basis of adenoviral vectors expressing hemagglutinin genes of different influenza strains. PMID:23346377

  17. RECOMBINANT INFLUENZA VACCINES

    OpenAIRE

    Sedova, E.; Shcherbinin, D.; Migunov, A.; Smirnov, Iu; Logunov, D.; Shmarov, M.; Tsybalova, L.; Naroditskiĭ, B.; O. Kiselev; Gintsburg, A.

    2012-01-01

    This review covers the problems encountered in the construction and production of new recombinant influenza vaccines. New approaches to the development of influenza vaccines are investigated; they include reverse genetics methods, production of virus-like particles, and DNA- and viral vector-based vaccines. Such approaches as the delivery of foreign genes by DNA- and viral vector-based vaccines can preserve the native structure of antigens. Adenoviral vectors are a promising gene-delivery pla...

  18. Soluble recombinant influenza vaccines.

    OpenAIRE

    Fiers, W; Neirynck, S; Deroo, T; Saelens, X; Jou, W M

    2001-01-01

    Soluble, recombinant forms of influenza A virus haemagglutinin and neuraminidase have been produced in cells of lower eukaryotes, and shown in a mouse model to induce complete protective immunity against a lethal virus challenge. Soluble neuraminidase, produced in a baculovirus system, consisted of tetramers, dimers and monomers. Only the tetramers were enzymatically active. The immunogenicity decreased very considerably in the order tetra > di > mono. Therefore, we fused the head part of the...

  19. Nonradiative recombination in semiconductors

    CERN Document Server

    Abakumov, VN; Yassievich, IN

    1991-01-01

    In recent years, great progress has been made in the understandingof recombination processes controlling the number of excessfree carriers in semiconductors under nonequilibrium conditions. As a result, it is now possible to give a comprehensivetheoretical description of these processes. The authors haveselected a number of experimental results which elucidate theunderlying physical problems and enable a test of theoreticalmodels. The following topics are dealt with: phenomenological theory ofrecombination, theoretical models of shallow and deep localizedstates, cascade model of carrier captu

  20. Ultraminiature, Micropower Multipurpose Display Project

    Data.gov (United States)

    National Aeronautics and Space Administration — High information content electronic displays remain the most difficult element of the human-machine interface to effectively miniaturize. Mobile applications need a...

  1. Assessment of PACS Display Systems

    OpenAIRE

    Aldrich, John E.; Rutledge, John D.

    2005-01-01

    This work describes our experience in reviewing the performance criteria for display systems and how we have implemented a practical approach to the assessment of the workstation environment in a large tertiary care hospital. The acceptance criteria contained in the draft report of Topic Group 18 of the American Association of Physicists in Medicine (AAPM) were used as a basis for assessment of primary and secondary displays. A telescopic photometer was used to measure the maximum luminance a...

  2. A simple vector system to improve performance and utilisation of recombinant antibodies

    OpenAIRE

    Vincent Karen J; Mitchell Joanne N; Rojas Gertrudis; Martin Cecile D; Wu Jiahua; McCafferty John; Schofield Darren J

    2006-01-01

    Abstract Background Isolation of recombinant antibody fragments from antibody libraries is well established using technologies such as phage display. Phage display vectors are ideal for efficient display of antibody fragments on the surface of bacteriophage particles. However, they are often inefficient for expression of soluble antibody fragments, and sub-cloning of selected antibody populations into dedicated soluble antibody fragment expression vectors can enhance expression. Results We ha...

  3. Implementation of PIC Based LED Displays

    OpenAIRE

    Htet Htet Thit San; Chaw Myat Nwe; Hla Myo Tun

    2014-01-01

    This paper explains the project which is a special kind of LED Display Board for performing dance movement according to the rhythm of music. Nowadays, LED display boards are widely used in advertising and other applications. LED display boards can also be used indoors or outdoors. The objective of this system is to design a display panel by using several dozens of LED matrix display. The display pattern can desire to be changed easily and modified by the user. This LED display...

  4. Dynamic heater for display elements

    Science.gov (United States)

    Dehmlow, Brian P.; Bishop, Gary D.; Steffensmeier, Martin J.; Sampica, James D.; Skarohlid, Mark C.

    1997-07-01

    Liquid crystal display (LCD) deliver optimal performance when the entire display surface is isothermal and at a controllable temperature. This condition creates uniform electro-optical properties within the liquid crystal layer. This paper describes a dynamic, multicontact heater system that actively compensates for uneven heat loads, thereby creating the desired isothermal condition. The heater system includes a uniform resistive sheet, with multiple electrical contacts around the perimeter. A switch network connects each heater contact to a power supply, ground potential, or a high impedance. A microprocessor monitors the display temperature, and detects non-uniformity, and selectively applies heat to cold areas of the display. The dynamic heater system employs a variety of heating patterns to create the desired isothermal condition.Heating patterns vary in duration, power applied, and location on the display face. The microprocessor control loop can also detect and isolate faulty drive elements, and compensate for non- uniformity in the heater itself. The heater prevents stress- induced delaminations, mechanical distortions, and stress- induced birefringence in optical components. Test results indicate that a dynamic heater can be beneficial in the thermal design of LCD products.

  5. Recombinant Collagenlike Proteins

    Science.gov (United States)

    Fertala, Andzej

    2007-01-01

    A group of collagenlike recombinant proteins containing high densities of biologically active sites has been invented. The method used to express these proteins is similar to a method of expressing recombinant procollagens and collagens described in U. S. Patent 5,593,859, "Synthesis of human procollagens and collagens in recombinant DNA systems." Customized collagenous proteins are needed for biomedical applications. In particular, fibrillar collagens are attractive for production of matrices needed for tissue engineering and drug delivery. Prior to this invention, there was no way of producing customized collagenous proteins for these and other applications. Heretofore, collagenous proteins have been produced by use of such biological systems as yeasts, bacteria, and transgenic animals and plants. These products are normal collagens that can also be extracted from such sources as tendons, bones, and hides. These products cannot be made to consist only of biologically active, specific amino acid sequences that may be needed for specific applications. Prior to this invention, it had been established that fibrillar collagens consist of domains that are responsible for such processes as interaction with cells, binding of growth factors, and interaction with a number of structural proteins present in the extracellular matrix. A normal collagen consists of a sequence of domains that can be represented by a corresponding sequence of labels, e.g., D1D2D3D4. A collagenlike protein of the present invention contains regions of collagen II that contain multiples of a single domain (e.g., D1D1D1D1 or D4D4D4D4) chosen for its specific biological activity. By virtue of the multiplicity of the chosen domain, the density of sites having that specific biological activity is greater than it is in a normal collagen. A collagenlike protein according to this invention can thus be made to have properties that are necessary for tissue engineering.

  6. RecQ Promotes Toxic Recombination in Cells Lacking Recombination-Intermediate-Removal Proteins

    OpenAIRE

    Magner, Daniel B.; Blankschien, Matthew D.; Lee, Jennifer A.; Pennington, Jeanine M.; James R. Lupski; Rosenberg, Susan M.

    2007-01-01

    The RecQ-helicase family is widespread, highly conserved, and includes human orthologues that suppress genomic instability and cancer. In vivo, some RecQ homologues promote reduction of steady-state levels of bimolecular recombination intermediates (BRIs), which block chromosome segregation if not resolved. We find that in vivo, E. coli RecQ can promote the opposite: the net accumulation of BRIs. We report that cells lacking Ruv and UvrD BRI-resolution and -prevention proteins die and display...

  7. Primordial magnetogenesis before recombination

    CERN Document Server

    Fabre, Ophélia

    2015-01-01

    The origin of large magnetic fields in the Universe remains currently unknown. We investigate here a mechanism before recombination based on known physics. The source of the vorticity is due to the changes in the photon distribution function caused by the fluctuations in the background photons. We show that the magnetic field generated in the MHD limit, due to the Coulomb scattering, is of the order $10^{-49}$ G. We explicitly show that the magnetic fields generated from this process are sustainable and are not erased by resistive diffusion. We compare the results with current observations and discuss the implications.

  8. Putting it all together: improving display integration in ecological displays.

    Science.gov (United States)

    Burns, C M

    2000-01-01

    Computer displays are being designed for increasingly larger industrial systems. As the application domain scales up, maintaining integration across different kinds of views becomes more challenging. This paper presents the results of a study of three different approaches to integration based on the spatial and temporal proximity of related information objects. The domain used for evaluation was a simulation of an industry-scale conventional power plant. All three displays were ecological displays developed using an abstraction hierarchy analysis. Views were integrated in a high-space/low-time, low-space/high-time, and high-space/high-time integration of means-end related objects. During a fault detection and diagnosis task, it was found that a low level of integration, high-space/ low-time, provided the fastest fault detection time. However, the most integrated condition, high-space/high-time, resulted in the fastest and most accurate fault diagnosis performance. Actual or potential applications of this research include computer displays for large-scale systems such as network management or process control, for which problem solving is critical and integration must be maintained. PMID:11022882

  9. CRMAGE: CRISPR Optimized MAGE Recombineering

    OpenAIRE

    Carlotta Ronda; Lasse Ebdrup Pedersen; Sommer, Morten O. A.; Alex Toftgaard Nielsen

    2016-01-01

    A bottleneck in metabolic engineering and systems biology approaches is the lack of efficient genome engineering technologies. Here, we combine CRISPR/Cas9 and λ Red recombineering based MAGE technology (CRMAGE) to create a highly efficient and fast method for genome engineering of Escherichia coli. Using CRMAGE, the recombineering efficiency was between 96.5% and 99.7% for gene recoding of three genomic targets, compared to between 0.68% and 5.4% using traditional recombineering. For modulat...

  10. Information retrieval and display system

    Science.gov (United States)

    Groover, J. L.; King, W. L.

    1977-01-01

    Versatile command-driven data management system offers users, through simplified command language, a means of storing and searching data files, sorting data files into specified orders, performing simple or complex computations, effecting file updates, and printing or displaying output data. Commands are simple to use and flexible enough to meet most data management requirements.

  11. Synthetic vision display evaluation studies

    Science.gov (United States)

    Regal, David M.; Whittington, David H.

    1994-01-01

    The goal of this research was to help us understand the display requirements for a synthetic vision system for the High Speed Civil Transport (HSCT). Four experiments were conducted to examine the effects of different levels of perceptual cue complexity in displays used by pilots in a flare and landing task. Increased levels of texture mapping of terrain and runway produced mixed results, including harder but shorter landings and a lower flare initiation altitude. Under higher workload conditions, increased texture resulted in an improvement in performance. An increase in familiar size cues did not result in improved performance. Only a small difference was found between displays using two patterns of high resolution texture mapping. The effects of increased perceptual cue complexity on performance was not as strong as would be predicted from the pilot's subjective reports or from related literature. A description of the role of a synthetic vision system in the High Speed Civil Transport is provide along with a literature review covering applied research related to perceptual cue usage in aircraft displays.

  12. A multi-Fc-species system for recombinant antibody production

    OpenAIRE

    Nizak Clément; Vielemeyer Ole; El Marjou Ahmed; Moutel Sandrine; Benaroch Philippe; Dübel Stefan; Perez Franck

    2009-01-01

    Abstract Background Genomic, transcriptomic and proteomic projects often suffer from a lack of functional validation creating a strong demand for specific and versatile antibodies. Antibody phage display represents an attractive approach to select rapidly in vitro the equivalent of monoclonal antibodies, like single chain Fv antibodies, in an inexpensive and animal free way. However, so far, recombinant antibodies have not managed to impose themselves as efficient alternatives to natural anti...

  13. Display Sharing: An Alternative Paradigm

    Science.gov (United States)

    Brown, Michael A.

    2010-01-01

    The current Johnson Space Center (JSC) Mission Control Center (MCC) Video Transport System (VTS) provides flight controllers and management the ability to meld raw video from various sources with telemetry to improve situational awareness. However, maintaining a separate infrastructure for video delivery and integration of video content with data adds significant complexity and cost to the system. When considering alternative architectures for a VTS, the current system's ability to share specific computer displays in their entirety to other locations, such as large projector systems, flight control rooms, and back supporting rooms throughout the facilities and centers must be incorporated into any new architecture. Internet Protocol (IP)-based systems also support video delivery and integration. IP-based systems generally have an advantage in terms of cost and maintainability. Although IP-based systems are versatile, the task of sharing a computer display from one workstation to another can be time consuming for an end-user and inconvenient to administer at a system level. The objective of this paper is to present a prototype display sharing enterprise solution. Display sharing is a system which delivers image sharing across the LAN while simultaneously managing bandwidth, supporting encryption, enabling recovery and resynchronization following a loss of signal, and, minimizing latency. Additional critical elements will include image scaling support, multi -sharing, ease of initial integration and configuration, integration with desktop window managers, collaboration tools, host and recipient controls. This goal of this paper is to summarize the various elements of an IP-based display sharing system that can be used in today's control center environment.

  14. JTEC panel on display technologies in Japan

    Science.gov (United States)

    Tannas, Lawrence E., Jr.; Glenn, William E.; Credelle, Thomas; Doane, J. William; Firester, Arthur H.; Thompson, Malcolm

    1992-01-01

    This report is one in a series of reports that describes research and development efforts in Japan in the area of display technologies. The following are included in this report: flat panel displays (technical findings, liquid crystal display development and production, large flat panel displays (FPD's), electroluminescent displays and plasma panels, infrastructure in Japan's FPD industry, market and projected sales, and new a-Si active matrix liquid crystal display (AMLCD) factory); materials for flat panel displays (liquid crystal materials, and light-emissive display materials); manufacturing and infrastructure of active matrix liquid crystal displays (manufacturing logistics and equipment); passive matrix liquid crystal displays (LCD basics, twisted nematics LCD's, supertwisted nematic LCD's, ferroelectric LCD's, and a comparison of passive matrix LCD technology); active matrix technology (basic active matrix technology, investment environment, amorphous silicon, polysilicon, and commercial products and prototypes); and projection displays (comparison of Japanese and U.S. display research, and technical evaluation of work).

  15. Detection of biomarkers using recombinant antibodies coupled to nanostructured platforms

    Directory of Open Access Journals (Sweden)

    Michael R. Kierny

    2012-07-01

    Full Text Available The utility of biomarker detection in tomorrow's personalized health care field will mean early and accurate diagnosis of many types of human physiological conditions and diseases. In the search for biomarkers, recombinant affinity reagents can be generated to candidate proteins or post-translational modifications that differ qualitatively or quantitatively between normal and diseased tissues. The use of display technologies, such as phage-display, allows for manageable selection and optimization of affinity reagents for use in biomarker detection. Here we review the use of recombinant antibody fragments, such as scFvs and Fabs, which can be affinity-selected from phage-display libraries, to bind with both high specificity and affinity to biomarkers of cancer, such as Human Epidermal growth factor Receptor 2 (HER2 and Carcinoembryonic antigen (CEA. We discuss how these recombinant antibodies can be fabricated into nanostructures, such as carbon nanotubes, nanowires, and quantum dots, for the purpose of enhancing detection of biomarkers at low concentrations (pg/mL within complex mixtures such as serum or tissue extracts. Other sensing technologies, which take advantage of ‘Surface Enhanced Raman Scattering’ (gold nanoshells, frequency changes in piezoelectric crystals (quartz crystal microbalance, or electrical current generation and sensing during electrochemical reactions (electrochemical detection, can effectively provide multiplexed platforms for detection of cancer and injury biomarkers. Such devices may soon replace the traditional time consuming ELISAs and Western blots, and deliver rapid, point-of-care diagnostics to market.

  16. Cell biology of mitotic recombination

    DEFF Research Database (Denmark)

    Lisby, Michael; Rothstein, Rodney

    2015-01-01

    Homologous recombination provides high-fidelity DNA repair throughout all domains of life. Live cell fluorescence microscopy offers the opportunity to image individual recombination events in real time providing insight into the in vivo biochemistry of the involved proteins and DNA molecules as w...

  17. Screening of TACE Peptide Inhibitors from Phage Display Peptide Library

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    To obtain the recombinant tumor necrosis factor-α converting enzyme (TACE) ectodomain and use it as a selective molecule for the screening of TACE peptide inhibitors, the cDNA coding catalytic domain (T800) and full-length ectodomain (T1300) of TACE were amplified by RTPCR, and the expression plasmids were constructed by inserting T800 and T1300 into plasmid pET28a and pET-28c respectively. The recombinant T800 and T1300 were induced by IPTG, and SDSPAGE and Western blotting analysis results revealed that T800 and T1300 were highly expressed in the form of inclusion body. After Ni2+-NTA resin affinity chromatography, the recombinant proteins were used in the screening of TACE-binding peptides from phage display peptide library respectively. After 4 rounds of biopanning, the positive phage clones were analyzed by ELISA, competitive inhibition assay and DNA sequencing. A common amino acid sequence (TRWLVYFSRPYLVAT) was found and synthesized. The synthetic peptide could inhibit the TNF-α release from LPS-stimulated human peripheral blood mononuclear cells (PBMC) up to 60.3 %. FACS analysis revealed that the peptide mediated the accumulation of TNF-α on the cell surface. These results demonstrate that the TACE-binding peptide is an effective antagonist of TACE.

  18. Interactive display of polygonal data

    Energy Technology Data Exchange (ETDEWEB)

    Wood, P.M.

    1977-10-01

    Interactive computer graphics is an excellent approach to many types of applications. It is an exciting method of doing geographic analysis when desiring to rapidly examine existing geographically related data or to display specially prepared data and base maps for publication. One such program is the interactive thematic mapping system called CARTE, which combines polygonal base maps with statistical data to produce shaded maps using a variety of shading symbolisms on a variety of output devices. A polygonal base map is one where geographic entities are described by points, lines, or polygons. It is combined with geocoded data to produce special subject or thematic maps. Shading symbolisms include texture shading for areas, varying widths for lines, and scaled symbols for points. Output devices include refresh and storage CRTs and auxiliary Calcomp or COM hardcopy. The system is designed to aid in the quick display of spatial data and in detailed map design.

  19. Computational multi-projection display.

    Science.gov (United States)

    Moon, Seokil; Park, Soon-Gi; Lee, Chang-Kun; Cho, Jaebum; Lee, Seungjae; Lee, Byoungho

    2016-04-18

    A computational multi-projection display is proposed by employing a multi-projection system combining with compressive light field displays. By modulating the intensity of light rays from a spatial light modulator inside a single projector, the proposed system can offer several compact views to observer. Since light rays are spread to all directions, the system can provide flexible positioning of viewpoints without stacking projectors in vertical direction. Also, if the system is constructed properly, it is possible to generate view images with inter-pupillary gap and satisfy the super multi-view condition. We explain the principle of the proposed system and verify its feasibility with simulations and experimental results. PMID:27137332

  20. DNA Induces Conformational Changes in a Recombinant Human Minichromosome Maintenance Complex

    OpenAIRE

    Hesketh, Emma L.; Parker-Manuel, Richard P.; Chaban, Yuriy; Satti, Rabab; Coverley, Dawn; Orlova, Elena V; Chong, James P.J.

    2015-01-01

    ATP-dependent DNA unwinding activity has been demonstrated for recombinant archaeal homohexameric minichromosome maintenance (MCM) complexes and their yeast heterohexameric counterparts, but in higher eukaryotes such as Drosophila, MCM-associated DNA helicase activity has only been observed in the context of a co-purified Cdc45-MCM-GINS (CMG) complex. Here we describe the production of recombinant human MCM complex (hMCM) in E. coli. This protein displays ATP hydrolysis activity and is capabl...

  1. A High Through-put Platform for Recombinant Antibodies to Folded Proteins*

    OpenAIRE

    Hornsby, Michael; Paduch, Marcin; Miersch, Shane; Sääf, Annika; Matsuguchi, Tet; Lee, Brian; Wypisniak, Karolina; Doak, Allison; King, Daniel; Usatyuk, Svitlana; Perry, Kimberly; Lu, Vince; Thomas, William; Luke, Judy; Goodman, Jay

    2015-01-01

    Antibodies are key reagents in biology and medicine, but commercial sources are rarely recombinant and thus do not provide a permanent and renewable resource. Here, we describe an industrialized platform to generate antigens and validated recombinant antibodies for 346 transcription factors (TFs) and 211 epigenetic antigens. We describe an optimized automated phage display and antigen expression pipeline that in aggregate produced about 3000 sequenced Fragment antigen-binding domain that had ...

  2. Striations in Plasma Display Panel

    Institute of Scientific and Technical Information of China (English)

    OUYANG Ji-Ting; CAO Jing; MIAO Jin-Song

    2005-01-01

    @@ The phenomenon of striation has been investigated experimentally in a macroscopic ac-plasma display panel (PDP). The relationship between the characteristics of striation and the operation conditions including voltage, frequency, rib, and electrode configuration, etc is obtained experimentally. The origin of the striations is considered to be the ionization waves in the transient positive column near the dielectric surface in the anode area during the discharge, and the perturbation is caused by resonance kinetic effects in inert gas.

  3. Airborne Ultrasonic Tactile Display BCI

    OpenAIRE

    Hamada, Katsuhiko; Mori, Hiromu; Shinoda, Hiroyuki; Rutkowski, Tomasz M.

    2015-01-01

    This chapter presents results of our project, which studied whether contactless and airborne ultrasonic tactile display (AUTD) stimuli delivered to a user's palms could serve as a platform for a brain computer interface (BCI) paradigm. We used six palm positions to evoke combined somatosensory brain responses to implement a novel contactless tactile BCI. This achievement was awarded the top prize in the Annual BCI Research Award 2014 competition. This chapter also presents a comparison with a...

  4. Threat displays for final approach

    Science.gov (United States)

    Jennings, Chad Warren

    During periods of good visibility, airports can conduct Closely Spaced Parallel Approaches (CSPA) and simultaneously operate parallel runways separated by more than 750 feet. When visibility degrades to Instrument Meteorological Conditions (IMC) and pilots must fly exclusively by the instruments, the runway separation required to operate parallel runways increases to 3400 feet or more. For many airports around the country and the world this means the second runway must be closed and the airport operates at half capacity. To alleviate the delays caused by this capacity reduction many airports worldwide are planning to expand and build new runways. The projected cost of the ten largest airport projects in the United States is $8-16 Billion. Perhaps a less expensive solution can be found with innovative technology rather than real estate? This research presents the first ever design, implementation, and characterization of a synthetic vision display and the supporting flight system to attempt to achieve this solution. The display uses 3D graphics and an air to air datalink called Automatic Dependent Surveillance--Broadcast to present the pilot with the information necessary to aviate, navigate and monitor traffic. This thesis also documents the first series of flight experiments to test the applicability of synthetic vision displays to both runway incursion avoidance and CSPA. Finally, utilizing the results from the flight testing in a Monte Carlo analysis, the effect of deploying this display on minimum safe runway separation is calculated. It has been found that the minimum safe runway separation for IMC operation can safely be reduced to 1900 feet. If, in addition, significant changes are made in Air Traffic Control procedures for longitudinal aircraft spacing, the analysis shows that the display system presented herein will allow for runway separation of 1400 feet with no new restrictions on aircraft size or crosswind. Furthermore, with certain restrictions on

  5. Australian Children's Understanding of Display Rules

    Science.gov (United States)

    Choy, Grace

    2009-01-01

    Cultural display rules govern the manifestation of emotional expressions. In compliance with display rules, the facial expressions displayed (i.e. apparent emotion) may be incongruent with the emotion experienced (i.e. real emotion). This study investigates Australian Caucasian children's understanding of display rules. A sample of 80 four year…

  6. Preliminary display comparison for dental diagnostic applications

    Science.gov (United States)

    Odlum, Nicholas; Spalla, Guillaume; van Assche, Nele; Vandenberghe, Bart; Jacobs, Reinhilde; Quirynen, Marc; Marchessoux, Cédric

    2012-02-01

    The aim of this study is to predict the clinical performance and image quality of a display system for viewing dental images. At present, the use of dedicated medical displays is not uniform among dentists - many still view images on ordinary consumer displays. This work investigated whether the use of a medical display improved the perception of dental images by a clinician, compared to a consumer display. Display systems were simulated using the MEdical Virtual Imaging Chain (MEVIC). Images derived from two carefully performed studies on periodontal bone lesion detection and endodontic file length determination, were used. Three displays were selected: a medical grade one and two consumer displays (Barco MDRC-2120, Dell 1907FP and Dell 2007FPb). Some typical characteristics of the displays are evaluated by measurements and simulations like the Modulation Function (MTF), the Noise Power Spectrum (NPS), backlight stability or calibration. For the MTF, the display with the largest pixel pitch has logically the worst MTF. Moreover, the medical grade display has a slightly better MTF and the displays have similar NPS. The study shows the instability effect for the emitted intensity of the consumer displays compared to the medical grade one. Finally the study on the calibration methodology of the display shows that the signal in the dental images will be always more perceivable on the DICOM GSDF display than a gamma 2,2 display.

  7. Delayed recombination and standard rulers

    International Nuclear Information System (INIS)

    Measurements of baryonic acoustic oscillations (BAOs) in galaxy surveys have been recognized as a powerful tool for constraining dark energy. However, this method relies on the knowledge of the size of the acoustic horizon at recombination derived from cosmic microwave background (CMB) anisotropy measurements. This estimate is typically derived assuming a standard recombination scheme; additional radiation sources can delay recombination altering the cosmic ionization history and the cosmological inferences drawn from CMB and BAO data. In this paper we quantify the effect of delayed recombination on the determination of dark energy parameters from future BAO surveys such as the Baryon Oscillation Spectroscopic Survey and the Wide-Field Multi-Object Spectrograph. We find the impact to be small but still not negligible. In particular, if recombination is nonstandard (to a level still allowed by CMB data), but this is ignored, future surveys may incorrectly suggest the presence of a redshift-dependent dark energy component. On the other hand, in the case of delayed recombination, adding to the analysis one extra parameter describing deviations from standard recombination does not significantly degrade the error bars on dark energy parameters and yields unbiased estimates. This is due to the CMB-BAO complementarity.

  8. Display of nuclear medicine imaging studies

    International Nuclear Information System (INIS)

    Nuclear medicine imaging studies involve evaluation of a large amount of image data. Digital signal processing techniques have introduced processing algorithms that increase the information content of the display. Nuclear medicine imaging studies require interactive selection of suitable form of display and pre-display processing. Static imaging study requires pre-display processing to detect focal defects. Point operations (histogram modification) along with zoom and capability to display more than one image in one screen is essential. This album mode of display is also applicable to dynamic, MUGA and SPECT data. Isometric display or 3-D graph of the image data is helpful in some cases e.g. point spread function, flood field data. Cine display is used on a sequence of images e.g. dynamic, MUGA and SPECT imaging studies -to assess the spatial movement of tracer with time. Following methods are used at the investigator's discretion for inspection of the 3-D object. 1) Display of orthogonal projections, 2) Display of album of user selected coronal/ sagital/ transverse orthogonal slices, 3) Display of three orthogonal slices through user selected point, 4) Display of a set of orthogonal slices generated in the user-selected volume, 5) Generation and display of 3-D shaded surface. 6) Generation of volume data and display along with the 3-D shaded surface, 7) Side by side display orthogonal slices of two 3-D objects. Displaying a set of two-dimensional slices of a 3-D reconstructed object through shows all the defects but lacks the 3-D perspective. Display of shaded surface lacks the ability to show the embedded defects. Volume display -combining the 3-D surface and gray level volume data is perhaps the best form of display. This report describes these forms of display along with the theory. (author)

  9. A conformable active matrix LED display

    OpenAIRE

    Tripathi, Ashutosh; Smits, Edsger; van der Steen, Jan-Laurens; Cauwe, Maarten; Verplancke, Rik; Myny, Kris; Maas, Joris; Kusters, Roel; Sabik, Sami; Murata, Mitsuhiro; Tomita, Yoshihiro; Ohmae, Hideki; van den Brand, Jeroen; Gelinck, Gerwin

    2015-01-01

    Conformable and stretchable displays can be integrated on complex surfaces. Such a display can assume the shape of a conformed surface by simultaneous multi-dimensional stretching and bending. Such technology provides new opportunities in the field of display applications, for example wearable displays integrated or embedded in a textile or onto complex surfaces in automotive interiors. In this work we present a conformable active matrix display using LEDs mounted on an amorphous Indium-Galli...

  10. Spatial Reasoning and Data Displays.

    Science.gov (United States)

    VanderPlas, Susan; Hofmann, Heike

    2016-01-01

    Graphics convey numerical information very efficiently, but rely on a different set of mental processes than tabular displays. Here, we present a study relating demographic characteristics and visual skills to perception of graphical lineups. We conclude that lineups are essentially a classification test in a visual domain, and that performance on the lineup protocol is associated with general aptitude, rather than specific tasks such as card rotation and spatial manipulation. We also examine the possibility that specific graphical tasks may be associated with certain visual skills and conclude that more research is necessary to understand which visual skills are required in order to understand certain plot types. PMID:26390492

  11. Recombinant phage probes for Listeria monocytogenes

    International Nuclear Information System (INIS)

    Monitoring of food and environmental samples for biological threats, such as Listeria monocytogenes, requires probes that specifically bind biological agents and ensure their immediate and efficient detection. There is a need for robust and inexpensive affinity probes as an alternative to antibodies. These probes may be recruited from random peptide libraries displayed on filamentous phage. In this study, we selected from two phage peptide libraries phage clones displaying peptides capable of specific and strong binding to the L. monocytogenes cell surface. The ability of isolated phage clones to interact specifically with L. monocytogenes was demonstrated using enzyme-linked immunosorbent assay (ELISA) and confirmed by co-precipitation assay. We also assessed the sensitivity of phage-bacteria binding by PCR on phage-captured Listeria cells, which could be detected at a concentration of 104 cells ml-1. In addition, as proof-of-concept, we tested the possibility of immobilizing the affinity-selected phages to a putative biosensor surface. The quality of phage deposition was monitored by ELISA and fluorescent microscopy. Phage-bacterial binding was confirmed by high power optical phase contrast microscopy. Overall, the results of this work validate the concept of affinity-selected recombinant filamentous phages as probes for detecting and monitoring bacterial agents under any conditions that warrant their recognition, including in food products

  12. Recombinant phage probes for Listeria monocytogenes

    Energy Technology Data Exchange (ETDEWEB)

    Carnazza, S; Gioffre, G; Felici, F; Guglielmino, S [Department of Microbiological, Genetic and Molecular Sciences, University of Messina, Messina (Italy)

    2007-10-03

    Monitoring of food and environmental samples for biological threats, such as Listeria monocytogenes, requires probes that specifically bind biological agents and ensure their immediate and efficient detection. There is a need for robust and inexpensive affinity probes as an alternative to antibodies. These probes may be recruited from random peptide libraries displayed on filamentous phage. In this study, we selected from two phage peptide libraries phage clones displaying peptides capable of specific and strong binding to the L. monocytogenes cell surface. The ability of isolated phage clones to interact specifically with L. monocytogenes was demonstrated using enzyme-linked immunosorbent assay (ELISA) and confirmed by co-precipitation assay. We also assessed the sensitivity of phage-bacteria binding by PCR on phage-captured Listeria cells, which could be detected at a concentration of 10{sup 4} cells ml{sup -1}. In addition, as proof-of-concept, we tested the possibility of immobilizing the affinity-selected phages to a putative biosensor surface. The quality of phage deposition was monitored by ELISA and fluorescent microscopy. Phage-bacterial binding was confirmed by high power optical phase contrast microscopy. Overall, the results of this work validate the concept of affinity-selected recombinant filamentous phages as probes for detecting and monitoring bacterial agents under any conditions that warrant their recognition, including in food products.

  13. Recombinant phage probes for Listeria monocytogenes

    Science.gov (United States)

    Carnazza, S.; Gioffrè, G.; Felici, F.; Guglielmino, S.

    2007-10-01

    Monitoring of food and environmental samples for biological threats, such as Listeria monocytogenes, requires probes that specifically bind biological agents and ensure their immediate and efficient detection. There is a need for robust and inexpensive affinity probes as an alternative to antibodies. These probes may be recruited from random peptide libraries displayed on filamentous phage. In this study, we selected from two phage peptide libraries phage clones displaying peptides capable of specific and strong binding to the L. monocytogenes cell surface. The ability of isolated phage clones to interact specifically with L. monocytogenes was demonstrated using enzyme-linked immunosorbent assay (ELISA) and confirmed by co-precipitation assay. We also assessed the sensitivity of phage-bacteria binding by PCR on phage-captured Listeria cells, which could be detected at a concentration of 104 cells ml-1. In addition, as proof-of-concept, we tested the possibility of immobilizing the affinity-selected phages to a putative biosensor surface. The quality of phage deposition was monitored by ELISA and fluorescent microscopy. Phage-bacterial binding was confirmed by high power optical phase contrast microscopy. Overall, the results of this work validate the concept of affinity-selected recombinant filamentous phages as probes for detecting and monitoring bacterial agents under any conditions that warrant their recognition, including in food products.

  14. Parameters affecting phage display library design for improved generation of human antibodies.

    OpenAIRE

    Lim, T.

    2009-01-01

    1.0 Introduction 1 1.1 Antibodies 1 1.2 Recombinant antibody technology 8 1.3 Antibody format engineering 13 1.4 Antibody library generation 16 1.5 Phage display panning procedures 21 2.0 Objective 24 3.0 Materials 26 3.1 Consumables 26 3.2 Laboratory equipment 27 3.3 Softwares 28 3.4 Chemicals, buffers and solutions 31 3.5 Media 31 3.6 Additives 32 3.7 Microorganisms and Eukaryotic cell lines 32 3.8 Plasmids 35 3.9 Recombinant Proteins, Affinit...

  15. Optical display for radar sensing

    Science.gov (United States)

    Szu, Harold; Hsu, Charles; Willey, Jefferson; Landa, Joseph; Hsieh, Minder; Larsen, Louis V.; Krzywicki, Alan T.; Tran, Binh Q.; Hoekstra, Philip; Dillard, John T.; Krapels, Keith A.; Wardlaw, Michael; Chu, Kai-Dee

    2015-05-01

    Boltzmann headstone S = kB Log W turns out to be the Rosette stone for Greek physics translation optical display of the microwave sensing hieroglyphics. The LHS is the molecular entropy S measuring the degree of uniformity scattering off the sensing cross sections. The RHS is the inverse relationship (equation) predicting the Planck radiation spectral distribution parameterized by the Kelvin temperature T. Use is made of the conservation energy law of the heat capacity of Reservoir (RV) change T Δ S = -ΔE equals to the internal energy change of black box (bb) subsystem. Moreover, an irreversible thermodynamics Δ S > 0 for collision mixing toward totally larger uniformity of heat death, asserted by Boltzmann, that derived the so-called Maxwell-Boltzmann canonical probability. Given the zero boundary condition black box, Planck solved a discrete standing wave eigenstates (equation). Together with the canonical partition function (equation) an average ensemble average of all possible internal energy yielded the celebrated Planck radiation spectral (equation) where the density of states (equation). In summary, given the multispectral sensing data (equation), we applied Lagrange Constraint Neural Network (LCNN) to solve the Blind Sources Separation (BSS) for a set of equivalent bb target temperatures. From the measurements of specific value, slopes and shapes we can fit a set of Kelvin temperatures T's for each bb targets. As a result, we could apply the analytical continuation for each entropy sources along the temperature-unique Planck spectral curves always toward the RGB color temperature display for any sensing probing frequency.

  16. Cell encoding recombinant human erythropoietin

    Energy Technology Data Exchange (ETDEWEB)

    Beck, A.K.; Withy, R.M.; Zabrecky, J.R.; Masiello, N.C.

    1990-09-04

    This patent describes a C127 cell transformed with a recombinant DNA vector. It comprises: a DNA sequence encoding human erythropoietin, the transformed cell being capable of producing N-linked and O-linked glycosylated human erythropoietin.

  17. Three Decades of Recombinant DNA.

    Science.gov (United States)

    Palmer, Jackie

    1985-01-01

    Discusses highlights in the development of genetic engineering, examining techniques with recombinant DNA, legal and ethical issues, GenBank (a national database of nucleic acid sequences), and other topics. (JN)

  18. Stable recombination hotspots in birds.

    Science.gov (United States)

    Singhal, Sonal; Leffler, Ellen M; Sannareddy, Keerthi; Turner, Isaac; Venn, Oliver; Hooper, Daniel M; Strand, Alva I; Li, Qiye; Raney, Brian; Balakrishnan, Christopher N; Griffith, Simon C; McVean, Gil; Przeworski, Molly

    2015-11-20

    The DNA-binding protein PRDM9 has a critical role in specifying meiotic recombination hotspots in mice and apes, but it appears to be absent from other vertebrate species, including birds. To study the evolution and determinants of recombination in species lacking the gene that encodes PRDM9, we inferred fine-scale genetic maps from population resequencing data for two bird species: the zebra finch, Taeniopygia guttata, and the long-tailed finch, Poephila acuticauda. We found that both species have recombination hotspots, which are enriched near functional genomic elements. Unlike in mice and apes, most hotspots are shared between the two species, and their conservation seems to extend over tens of millions of years. These observations suggest that in the absence of PRDM9, recombination targets functional features that both enable access to the genome and constrain its evolution. PMID:26586757

  19. Combinatorics in Recombinational Population Genomics

    Science.gov (United States)

    Parida, Laxmi

    The work that I will discuss is motivated by the need for understanding, and processing, the manifestations of recombination events in chromosome sequences. In this talk, we focus on two related problems. First, we explore the very general problem of reconstructability of pedigree history. How plausible is it to unravel the history of a complete unit (chromosome) of inheritance? The second problem deals with reconstructing the recombinational history of a collection of chromosomes.

  20. Progenitors of Recombining Supernova Remnants

    OpenAIRE

    Moriya, Takashi J.

    2012-01-01

    Usual supernova remnants have either ionizing plasma or plasma in collisional ionization equilibrium, i.e., the ionization temperature is lower than or equal to the electron temperature. However, the existence of recombining supernova remnants, i.e., supernova remnants with the ionization temperature higher than the electron temperature, is recently confirmed. One suggested way to have recombining plasma in a supernova remnant is to have a dense circumstellar medium at the time of the superno...

  1. Do mitochondria recombine in humans?

    OpenAIRE

    Eyre-Walker, A

    2000-01-01

    Until very recently, mitochondria were thought to be clonally inherited through the maternal line in most higher animals. However, three papers published in 2000 claimed population-genetic evidence of recombination in human mitochondrial DNA. Here I review the current state of the debate. I review the evidence for the two main pathways by which recombination might occur: through paternal leakage and via a mitochondrial DNA sequence in the nuclear genome. There is no strong evidence for either...

  2. Recombinant snake venom prothrombin activators

    OpenAIRE

    Lövgren, Ann

    2012-01-01

    Three prothrombin activators; ecarin, which was originally isolated from the venom of the saw-scaled viper Echis carinatus, trocarin from the rough-scaled snake Tropidechis carinatus, and oscutarin from the Taipan snake Oxyuranus scutellatus, were expressed in mammalian cells with the purpose to obtain recombinant prothrombin activators that could be used to convert prothrombin to thrombin. We have previously reported that recombinant ecarin can efficiently generate thrombin without the need ...

  3. Delayed recombination and cosmic parameters

    International Nuclear Information System (INIS)

    Current cosmological constraints from cosmic microwave background anisotropies are typically derived assuming a standard recombination scheme, however additional resonance and ionizing radiation sources can delay recombination, altering the cosmic ionization history and the cosmological inferences drawn from the cosmic microwave background data. We show that for recent observations of the cosmic microwave background anisotropy, from the Wilkinson microwave anisotropy probe satellite mission (WMAP) 5-year survey and from the arcminute cosmology bolometer array receiver experiment, additional resonance radiation is nearly degenerate with variations in the spectral index, ns, and has a marked effect on uncertainties in constraints on the Hubble constant, age of the universe, curvature and the upper bound on the neutrino mass. When a modified recombination scheme is considered, the redshift of recombination is constrained to z*=1078±11, with uncertainties in the measurement weaker by 1 order of magnitude than those obtained under the assumption of standard recombination while constraints on the shift parameter are shifted by 1σ to R=1.734±0.028. From the WMAP5 data we obtain the following constraints on the resonance and ionization sources parameters: εαi<0.058 at 95% c.l.. Although delayed recombination limits the precision of parameter estimation from the WMAP satellite, we demonstrate that this should not be the case for future, smaller angular scales measurements, such as those by the Planck satellite mission.

  4. Cross-Species Surface Display of Functional Spirochetal Lipoproteins by Recombinant Borrelia burgdorferi

    OpenAIRE

    Zückert, Wolfram R.; Lloyd, Jill E.; Stewart, Philip E.; Rosa, Patricia A.; Barbour, Alan G.

    2004-01-01

    Surface-exposed lipoproteins of relapsing fever (RF) and Lyme borreliosis Borrelia spirochetes mediate certain interactions of the bacteria with their arthropod and vertebrate hosts. RF spirochetes such as Borrelia hermsii serially evade the host's antibody response by multiphasic antigenic variation of Vsp and Vlp proteins. Furthermore, the expression of Vsp1 and Vsp2 by Borrelia turicatae is associated with neurotropism and higher blood densities, respectively. In contrast to RF Borrelia sp...

  5. Minimalism context-aware displays.

    Science.gov (United States)

    Cai, Yang

    2004-12-01

    Despite the rapid development of cyber technologies, today we still have very limited attention and communication bandwidth to process the increasing information flow. The goal of the study is to develop a context-aware filter to match the information load with particular needs and capacities. The functions include bandwidth-resolution trade-off and user context modeling. From the empirical lab studies, it is found that the resolution of images can be reduced in order of magnitude if the viewer knows that he/she is looking for particular features. The adaptive display queue is optimized with real-time operational conditions and user's inquiry history. Instead of measuring operator's behavior directly, ubiquitous computing models are developed to anticipate user's behavior from the operational environment data. A case study of the video stream monitoring for transit security is discussed in the paper. In addition, the author addresses the future direction of coherent human-machine vision systems. PMID:15687797

  6. The effect of a single recombination event

    DEFF Research Database (Denmark)

    Schierup, Mikkel Heide; Jensen, Thomas Mailund; Wiuf, Carsten

    the effect of a recombination event is the genealogical type of the event and whether SNP variation is present that can reveal the genealogical consequences of the recombination event. Recombination events that only change some branch lengths in the genealogy have a very small, but detectable, effect....... The more lineages left when the recombination event occurs, the larger effect it has, implying that it is mainly young recombination events that we detect when estimating the rate. If the population is growing, though, more lineages are present back in time and relatively more ancient recombination...... shared by these two populations are expected to contribute compared to the effect of private recombination events...

  7. Projection/Reflection Heads-up Display

    Data.gov (United States)

    National Aeronautics and Space Administration — To address the NASA need for an EVA information display device, Physical Optics Corporation (POC) proposes to develop a new Projection/Reflection Heads-up Display...

  8. Conceptual Design of Industrial Process Displays

    DEFF Research Database (Denmark)

    Pedersen, C.R.; Lind, Morten

    1999-01-01

    Today, process displays used in industry are often designed on the basis of piping and instrumentation diagrams without any method of ensuring that the needs of the operators are fulfilled. Therefore, a method for a systematic approach to the design of process displays is needed. This paper...... discusses aspects of process display design taking into account both the designer's and the operator's points of view. Three aspects are emphasized: the operator tasks, the display content and the display form. The distinction between these three aspects is the basis for proposing an outline for a display...... design method that matches the industrial practice of modular plant design and satisfies the needs of reusability of display design solutions. The main considerations in display design in the industry are to specify the operator's activities in detail, to extract the information the operators need from...

  9. X-Windows Widget for Image Display

    Science.gov (United States)

    Deen, Robert G.

    2011-01-01

    XvicImage is a high-performance XWindows (Motif-compliant) user interface widget for displaying images. It handles all aspects of low-level image display. The fully Motif-compliant image display widget handles the following tasks: (1) Image display, including dithering as needed (2) Zoom (3) Pan (4) Stretch (contrast enhancement, via lookup table) (5) Display of single-band or color data (6) Display of non-byte data (ints, floats) (7) Pseudocolor display (8) Full overlay support (drawing graphics on image) (9) Mouse-based panning (10) Cursor handling, shaping, and planting (disconnecting cursor from mouse) (11) Support for all user interaction events (passed to application) (12) Background loading and display of images (doesn't freeze the GUI) (13) Tiling of images.

  10. Holographic Waveguided See-Through Display Project

    Data.gov (United States)

    National Aeronautics and Space Administration — To address the NASA need for lightweight, space suit-mounted displays, Luminit proposes a novel Holographic Waveguided See-Through Display. Our proposed Holographic...

  11. OZ: An Innovative Primary Flight Display Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed SBIR project will develop OZ, an innovative primary flight display for aircraft. The OZ display, designed from "first principles" of vision science,...

  12. Investigations for designing catalytic recombiners

    International Nuclear Information System (INIS)

    In case of a severe accident in pressurised water reactors (PWR) a high amount of hydrogen up to about 20,000 m3 might be generated and released into the containments. The mixture consisting of hydrogen and oxygen may either burn or detonate, if ignited. In case of detonation the generated shock wave may endanger the components of the plant or the plant itself. Consequently, effective removal of hydrogen is required. The fact that hydrogen and oxygen react exo-thermally on catalytically acting surfaces already at low temperatures generating steam and heat is made use of in catalytic recombiners. They consist of substrates coated with catalyst (mainly platinum or palladium) which are arranged inside a casing. Being passively acting measures, recombiners do not need any additional energy supply. Experimental investigations on catalytic hydrogen recombination are conducted at FZJ (Forschungszentrum Juelich) using three test facilities. The results yield insight in the development potential of contemporary recombiner systems as well as of innovative systems. Detailed investigations on a recombiner section show strong temperature gradients over the surface of a catalytically coated sample. Dependent on the flow velocity, ignition temperature may be reached at the leading edge already at an inlet hydrogen concentration of about 5 vol.-%. The thermal strain of the substrate leads to considerable detachment of catalyst particles probably causing unintended ignition of the flammable mixture. Temperature peaks can be prevented effectively by leaving the first part of the plate uncoated. In order to avoid overheating of the catalyst elements of a recombiner even at high hydrogen concentrations a modular system of porous substrates is proposed. The metallic substrates are coated with platinum at low catalyst densities thus limiting the activity of the single specimen. A modular arrangement of these elements provides high recombination rates over a large hydrogen concentration

  13. Homologous Recombination in Negative Sense RNA Viruses

    OpenAIRE

    Michael Worobey; Guan-Zhu Han

    2011-01-01

    Recombination is an important process that influences biological evolution at many different levels. More and more homologous recombination events have been reported among negative sense RNA viruses recently. While sporadic authentic examples indicate that homologous recombination does occur, recombination seems to be generally rare or even absent in most negative sense RNA viruses, and most of the homologous recombination events reported in the literature were likely generated artificially d...

  14. Yeast cell surface display for lipase whole cell catalyst and its applications

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Yun; Zhang, Rui; Lian, Zhongshuai; Wang, Shihui; Wright, Aaron T.

    2014-08-01

    The cell surface display technique allows for the expression of target proteins or peptides on the microbial cell surface by fusing an appropriate protein as an anchoring motif. Yeast display systems, such as Pichia pastoris, Yarowia lipolytica and Saccharomyces cerevisiae, are ideal, alternative and extensive display systems with the advantage of simple genetic manipulation and post-translational modification of expressed heterologous proteins. Engineered yeasts show high performance characteristics and variant utilizations. Herein, we comprehensively summarize the variant factors affecting lipase whole cell catalyst activity and display efficiency, including the structure and size of target proteins, screening anchor proteins, type and chain length of linkers, and the appropriate matching rules among the above-mentioned display units. Furthermore, we also address novel approaches to enhance stability and activity of recombinant lipases, such as VHb gene co-expression, multi-enzyme co-display technique, and the micro-environmental interference and self-assembly techniques. Finally, we represent the variety of applications of whole cell surface displayed lipases on yeast cells in non-aqueous phases, including synthesis of esters, PUFA enrichment, resolution of chiral drugs, organic synthesis and biofuels. We demonstrate that the lipase surface display technique is a powerful tool for functionalizing yeasts to serve as whole cell catalysts, and increasing interest is providing an impetus for broad application of this technique.

  15. Display-centred applications in ubiquitous computing

    OpenAIRE

    José, Rui; Pinto, Helder

    2006-01-01

    Public displays can play an important enabling role in ubiquitous computing environments. This paper describes an on-going work for a multipurpose, multi-display infrastructure, designed to address the requirements of display-centred applications in ubiquitous computing environments. The system provides an infrastructure in which situated displays can act as portals to the physical space, allowing ubicomp applications to support their association with the physical world by providing them with...

  16. Holographic Helmet-Mounted Display Unit

    Science.gov (United States)

    Burley, James R., II; Larussa, Joseph A.

    1995-01-01

    Helmet-mounted display unit designed for use in testing innovative concepts for display of information to aircraft pilots. Operates in conjunction with computers generating graphical displays. Includes two ocular subunits containing miniature cathoderay tubes and optics providing 40 degrees vertical, 50 degrees horizontal field of view to each eye, with or without stereopsis. In future color application, each ocular subunit includes trichromatic holographic combiner tuned to red, green, and blue wavelengths of phosphors used in development of miniature color display devices.

  17. Implementation of PIC Based LED Displays

    Directory of Open Access Journals (Sweden)

    Htet Htet Thit San

    2014-09-01

    Full Text Available This paper explains the project which is a special kind of LED Display Board for performing dance movement according to the rhythm of music. Nowadays, LED display boards are widely used in advertising and other applications. LED display boards can also be used indoors or outdoors. The objective of this system is to design a display panel by using several dozens of LED matrix display. The display pattern can desire to be changed easily and modified by the user. This LED display board is overall in two major components; which are the microcontroller and LED display panel. Microcontrollers with programs are developed to generate characters and graphics for this module. In this system, when the LED display board is “ON”, it will display the messages and then dance movements by the rhythm of music using a PIC microcontroller. It is not needed to change the LED panel, only to change the input data in PIC program. In this system, LED panel is controlled by a program in microcontroller from serial to parallel shift registers using the scanning method. PIC microcontroller is for generating the output signal to output display board by using a program. Then, it will be run on the LED display board. This is very useful in area like railway platforms, streets, banks, training institutes and other applications to show data information on the large LED boards. As a result, this LED display board is useful as indoors or outdoors as it is also economic. This display consists of maximum 72 bright LEDs which are rotated to show the display. In this system, this display can show data information which will require a whopping 512 LEDs. Therefore hardware and cost minimization is achieved. PIC Basic Pro programming language will be used in PIC microcontroller. The simulation result will be tested with Proteus 8 Electronic Simulation Software.

  18. Recombining WMAP: Constraints on ionizing and resonance radiation at recombination

    International Nuclear Information System (INIS)

    We place new constraints on sources of ionizing and resonance radiation at the epoch of the recombination process using the recent cosmic microwave background temperature and polarization spectra coming from the Wilkinson Microwave Anisotropy Probe (WMAP). We find that non-standard recombination scenarios are still consistent with the current data. In light of this we study the impact that such models can have on the determination of several cosmological parameters. In particular, the constraints on curvature and baryon density appear to be weakly affected by a modified recombination scheme. However, it may affect the current WMAP constraints on inflationary parameters such as the spectral index ns and its running. Physically motivated models, such as those based on primordial black holes or super heavy dark matter decay, are able to provide a good fit to the current data. Future observations in both temperature and polarization will be needed to more stringently test these models

  19. Testing Bibliographic Displays for Online Catalogs.

    Science.gov (United States)

    Crawford, Walt

    1987-01-01

    Reports the design, methodology, and results of a research project which examined the effectiveness of bibliographic displays produced by online catalogs. A means of testing displays against several hundred thousand records at a reasonable cost and using that to test several display possibilities is described. (CLB)

  20. Selection of a breast cancer subpopulation-specific antibody using phage display on tissue sections

    DEFF Research Database (Denmark)

    Larsen, Simon Asbjørn; Meldgaard, Theresa; Fridriksdottir, Agla J;

    2015-01-01

    Breast cancer tumors are composed of heterogeneous cell populations. These populations display a high variance in morphology, growth and metastatic propensity. They respond differently to therapeutic interventions, and some may be more prone to cause recurrence. Studying individual subpopulations...... of breast cancer may provide crucial knowledge for the development of individualized therapy. However, this process is challenged by the availability of biomarkers able to identify subpopulations specifically. Here, we demonstrate an approach for phage display selection of recombinant antibody...... fragments on cryostat sections of human breast cancer tissue. This method allows for selection of recombinant antibodies binding to antigens specifically expressed in a small part of the tissue section. In this case, a CD271(+) subpopulation of breast cancer cells was targeted, and these may be potential...

  1. Recombinant cells that highly express chromosomally-integrated heterologous gene

    Science.gov (United States)

    Ingram, Lonnie O.; Ohta, Kazuyoshi; Wood, Brent E.

    2007-03-20

    Recombinant host cells are obtained that comprise (A) a heterologous, polypeptide-encoding polynucleotide segment, stably integrated into a chromosome, which is under transcriptional control of an endogenous promoter and (B) a mutation that effects increased expression of the heterologous segment, resulting in enhanced production by the host cells of each polypeptide encoded by that segment, relative to production of each polypeptide by the host cells in the absence of the mutation. The increased expression thus achieved is retained in the absence of conditions that select for cells displaying such increased expression. When the integrated segment comprises, for example, ethanol-production genes from an efficient ethanol producer like Zymomonas mobilis, recombinant Escherichia coli and other enteric bacterial cells within the present invention are capable of converting a wide range of biomass-derived sugars efficiently to ethanol.

  2. Inactivated recombinant plant virus protects dogs from a lethal challenge with canine parvovirus

    DEFF Research Database (Denmark)

    Langeveld, J.P.M.; Brennan, F.R.; Martinez-Torrecuadrada, J.L.;

    2001-01-01

    A vaccine based upon a recombinant plant virus (CPMV-PARVO1), displaying a peptide derived from the VP2 capsid protein of canine parvovirus (CPV), has previously been described. To date, studies with the vaccine have utilized viable plant chimaeric particles (CVPs). In this study, CPMV-PARVO1 was...

  3. Citizenship displayed by disabled people

    Directory of Open Access Journals (Sweden)

    Eliana Prado Carlino

    2010-12-01

    Full Text Available By investigating the processes by which successful teachers become activate citizens and by listening to the diversity and richness of their life and formation stories, this work became possible. Its aim is to display some of the utterances of two Down Syndrome individuals and their active-citizenship activities. Their stories were told in the reports of two teachers when describing their personal and professional history, and were considered to be an integral part of it. Thus, some of the utterances and perceptions with which these two individuals elaborate their references, their worldview and their active-citizenship activity are evidenced in this paper. This article is based on the language conceptions of Vygotsky and Bakhtin who defend the idea that the group and the social mentality are ingrain in the individual. Hence, the history of one person reveals that of many others, since there is a deep link between the individual and the social in the formation of a subjective worldview. As a result, it can be easily seen that the utterances expressed by the participants in this research cannot be considered strictly individual because enunciation is social in nature. Despite the fact that the utterances are those of individuals, they manifest a collective reality. This demonstrates the real advantages and possibilities that deficient people get from their participation and intervention in society.

  4. Irradiation from video display terminals

    International Nuclear Information System (INIS)

    Video display terminals (VDT's) are in common use by computer operators. In the last years this group of workers has expressed growing concern about their work environment and possible hazardious effects in connection with radiation emission from VDT's. Radiation types and levels of emission and possible biological effects have been the subject of research activity in Norway and in other countries. This report summarizes the various radiation types and their levels of emission from VDT's. An overview of recent epidemiological studies and animal experiments, and the conclusions given by the research groups are also presented. The conclusions drawn in this report based on the current knowledge are: Radiation, other than low frequency pulsed magnetic fields, have low and negligible emission levels and will not represent any health hazard to VDT-operator or to the foetus of pregnant operators. The biological effects of low frequency pulsed mangetic fields have been the subject of epidemiological studies and animal experiments. Epidemiological studies carried out in Canada, Finland, Sweden and Norway gave no support for any correlation between pregnancy complications and operation of VDT's. From animal experiments it has so far been impossible to assert an effect on pregnancy outcome from low frequency pulsed magnetic fields

  5. CERN students display their work

    CERN Multimedia

    Anaïs Schaeffer

    2011-01-01

    The first poster session by students working on the LHC experiments, organised by the LPCC, was a great success. Showcasing the talents of over a hundred young physicists from all over the world, it was an opportunity for everyone at CERN to check out the wide range of research work being done by the new generation of physicists at CERN.   At 5.30 p.m. on Wednesday 23 March, the first poster session by CERN students took place in Restaurant No.1, where no fewer than 87 posters went on public display. The students were split into 8 groups according to their research field* and all were on hand to answer the questions of an inquisitive audience. TH Department's Michelangelo Mangano, who is head of the LHC Physics Centre at CERN (LPCC) and is responsible for the initiative, confirms that nothing was left to chance, even the choice of date: "We wanted to make the most of the general enthusiasm around the winter conferences and the meeting of the LHC Experiments Committee to present the stud...

  6. Ultrabarrier Flexible Substrates for Flat Panel Displays

    Energy Technology Data Exchange (ETDEWEB)

    Burrows, Paul E.; Graff, Gordon L.; Gross, Mark E.; Martin, Peter M.; Shi, Ming-Kun; Hall, Michael G.; Mast, Eric S.; Bonham, Charles C.; Bennett, Wendy D.; Sullivan, Michael B.

    2001-05-01

    We describe a flexible, transparent plastic substrate for flat panel display applications. Using roll-coating techniques, we apply a composite thin film barrier to commercially available polymers, which restricts moisture and oxygen permeation to undetectable levels. The barrier film can be capped with a thin film of transparent conductive oxide in the same roll-coater, yielding an engineered substrate (Barix™) for next generation, rugged, lightweight or flexible displays. The substrate is sufficiently impermeable to moisture and oxygen for application to moisture-sensitive display applications, such as organic light emitting displays (OLEDs). This enables, for the first time, lightweight and flexible emissive organic displays.

  7. Medical color displays and their calibration

    Science.gov (United States)

    Fan, Jiahua; Roehrig, Hans; Dallas, W.; Krupinski, Elizabeth

    2009-08-01

    Color displays are increasingly used for medical imaging, replacing the traditional monochrome displays in radiology for multi-modality applications, 3D representation applications, etc. Color displays are also used increasingly because of wide spread application of Tele-Medicine, Tele-Dermatology and Digital Pathology. At this time, there is no concerted effort for calibration procedures for this diverse range of color displays in Telemedicine and in other areas of the medical field. Using a colorimeter to measure the display luminance and chrominance properties as well as some processing software we developed a first attempt to a color calibration protocol for the medical imaging field.

  8. Inhomogeneous recombinations during cosmic reionization

    CERN Document Server

    Sobacchi, Emanuele

    2014-01-01

    By depleting the ionizing photon budget available to expand cosmic HII regions, recombining systems (or Lyman limit systems) can have a large impact during (and following) cosmic reionization. Unfortunately, directly resolving such structures in large-scale reionization simulations is computationally impractical. Instead, here we implement a sub-grid prescription for tracking inhomogeneous recombinations in the intergalactic medium. Building on previous work parameterizing photo-heating feedback on star-formation, we present large-scale, semi-numeric reionization simulations which self-consistently track the local (sub-grid) evolution of both sources and sinks of ionizing photons. Our simple, single-parameter model naturally results in both an extended reionization and a modest, slowly-evolving emissivity, consistent with observations. Recombinations are instrumental in slowing the growth of large HII regions, and damping the rapid rise of the ionizing background in the late stages of (and following) reioniza...

  9. Recombinant snake venom prothrombin activators.

    Science.gov (United States)

    Lövgren, Ann

    2013-01-01

    Three prothrombin activators; ecarin, which was originally isolated from the venom of the saw-scaled viper Echis carinatus, trocarin from the rough-scaled snake Tropidechis carinatus, and oscutarin from the Taipan snake Oxyuranus scutellatus, were expressed in mammalian cells with the purpose to obtain recombinant prothrombin activators that could be used to convert prothrombin to thrombin. We have previously reported that recombinant ecarin can efficiently generate thrombin without the need for additional cofactors, but does not discriminate non-carboxylated prothrombin from biologically active γ-carboxylated prothrombin. Here we report that recombinant trocarin and oscutarin could not efficiently generate thrombin without additional protein co-factors. We confirm that both trocarin and oscutarin are similar to human coagulation Factor X (FX), explaining the need for additional cofactors. Sequencing of a genomic fragment containing 7 out of the 8 exons coding for oscutarin further confirmed the similarity to human FX. PMID:23111318

  10. Reliability studies on MEMS shutters and displays

    Science.gov (United States)

    Wu, Joyce H.; Steyn, J. Lodewyk

    2013-03-01

    Mobile devices have become an integral part of everyday life, and as the primary input/output interface, the display now represents a key factor of user experience. The display also consumes increasingly more of the power budget than ever before, resulting in a challenge for device makers to reduce display power consumption without negatively impacting perceived image quality. Pixtronix displays are digital, trans-flective and offer a low-power advantage, without sacrificing brightness or color gamut. Incumbent display technologies such as LCD, lose over 90% of backlight output due to polarizers and color filters. The core of the Pixtronix MEMS-based display technology is the Digital Micro Shutter (DMS). The micro-shutters are fabricated on active TFT backplanes in conventional LCD fabrication facilities. To complete the DMS display system, an aperture plate and backlight are added, and the display is filled with a fluid. This display technology promises a significant reduction in power consumption over conventional LCD displays, while maintaining the high-brightness, wide color gamut, 24-bit color video capabilities that users expect from today's mobile devices.

  11. CRMAGE: CRISPR Optimized MAGE Recombineering

    Science.gov (United States)

    Ronda, Carlotta; Pedersen, Lasse Ebdrup; Sommer, Morten O. A.; Nielsen, Alex Toftgaard

    2016-01-01

    A bottleneck in metabolic engineering and systems biology approaches is the lack of efficient genome engineering technologies. Here, we combine CRISPR/Cas9 and λ Red recombineering based MAGE technology (CRMAGE) to create a highly efficient and fast method for genome engineering of Escherichia coli. Using CRMAGE, the recombineering efficiency was between 96.5% and 99.7% for gene recoding of three genomic targets, compared to between 0.68% and 5.4% using traditional recombineering. For modulation of protein synthesis (small insertion/RBS substitution) the efficiency was increased from 6% to 70%. CRMAGE can be multiplexed and enables introduction of at least two mutations in a single round of recombineering with similar efficiencies. PAM-independent loci were targeted using degenerate codons, thereby making it possible to modify any site in the genome. CRMAGE is based on two plasmids that are assembled by a USER-cloning approach enabling quick and cost efficient gRNA replacement. CRMAGE furthermore utilizes CRISPR/Cas9 for efficient plasmid curing, thereby enabling multiple engineering rounds per day. To facilitate the design process, a web-based tool was developed to predict both the λ Red oligos and the gRNAs. The CRMAGE platform enables highly efficient and fast genome editing and may open up promising prospective for automation of genome-scale engineering. PMID:26797514

  12. Controlled Release from Recombinant Polymers

    OpenAIRE

    Price, Robert; Poursaid, Azadeh; Ghandehari, Hamidreza

    2014-01-01

    Recombinant polymers provide a high degree of molecular definition for correlating structure with function in controlled release. The wide array of amino acids available as building blocks for these materials lend many advantages including biorecognition, biodegradability, potential biocompatibility, and control over mechanical properties among other attributes. Genetic engineering and DNA manipulation techniques enable the optimization of structure for precise control over spatial and tempor...

  13. Preparing Recombinant Gonad Organ Cultures

    OpenAIRE

    sprotocols

    2014-01-01

    Authors: Blanche Capel and Jordan Batchvarov Corresponding author ([]()) ### INTRODUCTION It can be useful to assay migration between any two adjacent tissues during development. This protocol assays cell migration between the gonad and mesonephros using tissue recombination between genetically marked and unmarked tissue, combined with an organ culture technique. First, agar blocks are prepared in a custom-built mold. The size and sh...

  14. Display Blocks: a Set of Cubic Displays for Tangible, Multi-Perspective Data Exploration

    OpenAIRE

    Pla i Conesa, Pol; Maes, Patricia

    2013-01-01

    This paper details the design and implementation of a new type of display technology. Display Blocks are a response to two major limitations of current displays: dimensional compression and physical-digital disconnect. Each Display Block consists of six organic light emitting diode (OLED) screens, arranged in a cubic form factor. We explore the possibilities that this type of display holds for data visualization, manipulation and exploration. To this end, we accompany our design with a set of...

  15. Display elements and gaps: a comparison of flat panel display characteristics

    OpenAIRE

    Spenkelink, G.P.J.; Besuijen, J.

    1992-01-01

    The relation between typical flat panel display characteristics and display quality was studied. Subjective preferences were obtained with respect to simulated black-on-white flat panel displays. The displays differed in the sort of separation between the display elements and the shape of these elements. Further, the height/width ratio of the front was studied in relation with a fixed font matrix. The preferences were obtained through a paired comparison of all possible pairs of simulated dis...

  16. Pathogenesis of Lassa Fever Virus Infection: I. Susceptibility of Mice to Recombinant Lassa Gp/LCMV Chimeric Virus

    OpenAIRE

    Lee, Andrew M.; Cruite, Justin; Welch, Megan J.; Sullivan, Brian; Oldstone, Michael B. A.

    2013-01-01

    Lassa virus (LASV) is a BSL-4 restricted agent. To allow study of infection by LASV under BSL-2 conditions, we generated a recombinant virus in which the LASV glycoprotein (Gp) was placed on the backbone of lymphocytic choriomeningitis virus (LCMV) Cl13 nucleoprotein, Z and polymerase genes (rLCMV Cl13/LASV Gp). The recombinant virus displayed high tropism for dendritic cells following in vitro or in vivo infection. Inoculation of immunocompetent adults resulted in an acute infection, generat...

  17. Data display with the Q system

    International Nuclear Information System (INIS)

    The Q data-acquisition system for PDP-11 mini-computers at the Clinton P. Anderson Meson Physics Facility (LAMPF) provides experimenters with basic tools for on-line data display. Tasks are available to plot one- and two-parameter histograms on Tektronix 4000 series storage-tube terminals. The histograms to be displayed and the display format may be selected with simple keyboard commands. A task is also available to create and display live two-parameter scatter plots for any acquired or calculated quantities. Other tasks in the system manage the display data base, list display parameters and histogram contents on hardcopy devices, and save core histograms on disk or tape for off-line analysis. 8 figures

  18. Spectroradiometric characterization of autostereoscopic 3D displays

    Science.gov (United States)

    Rubiño, Manuel; Salas, Carlos; Pozo, Antonio M.; Castro, J. J.; Pérez-Ocón, Francisco

    2013-11-01

    Spectroradiometric measurements have been made for the experimental characterization of the RGB channels of autostereoscopic 3D displays, giving results for different measurement angles with respect to the normal direction of the plane of the display. In the study, 2 different models of autostereoscopic 3D displays of different sizes and resolutions were used, making measurements with a spectroradiometer (model PR-670 SpectraScan of PhotoResearch). From the measurements made, goniometric results were recorded for luminance contrast, and the fundamental hypotheses have been evaluated for the characterization of the displays: independence of the RGB channels and their constancy. The results show that the display with the lower angle variability in the contrast-ratio value and constancy of the chromaticity coordinates nevertheless presented the greatest additivity deviations with the measurement angle. For both displays, when the parameters evaluated were taken into account, lower angle variability consistently resulted in the 2D mode than in the 3D mode.

  19. Data display with the Q system

    International Nuclear Information System (INIS)

    The Q data-acquisition system for PDP-11 minicomputers at the Clinton P. Anderson Meson Physics Facility (LAMPF) provides experiments with basic tools for on-line data display. Tasks are available to plot one- and two-parameter histograms on Tektronix 4000 series storage-tube terminals. The histograms to be displayed and the display format may be selected with simple keyboard commands. A task is also available to create and display live two-parameter scatter plots for any acquired or calculated quantities. Other tasks in the system manage the display data base, list display parameters and histogram contents on hardcopy devices, and save core histograms on disk or tape for off-line analysis

  20. Three-dimensional Imaging, Visualization, and Display

    CERN Document Server

    Javidi, Bahram; Son, Jung-Young

    2009-01-01

    Three-Dimensional Imaging, Visualization, and Display describes recent developments, as well as the prospects and challenges facing 3D imaging, visualization, and display systems and devices. With the rapid advances in electronics, hardware, and software, 3D imaging techniques can now be implemented with commercially available components and can be used for many applications. This volume discusses the state-of-the-art in 3D display and visualization technologies, including binocular, multi-view, holographic, and image reproduction and capture techniques. It also covers 3D optical systems, 3D display instruments, 3D imaging applications, and details several attractive methods for producing 3D moving pictures. This book integrates the background material with new advances and applications in the field, and the available online supplement will include full color videos of 3D display systems. Three-Dimensional Imaging, Visualization, and Display is suitable for electrical engineers, computer scientists, optical e...

  1. Single-cell characterization of autotransporter-mediated Escherichia coli surface display of disulfide bond-containing proteins.

    Science.gov (United States)

    Ramesh, Balakrishnan; Sendra, Victor G; Cirino, Patrick C; Varadarajan, Navin

    2012-11-01

    Autotransporters (ATs) are a family of bacterial proteins containing a C-terminal β-barrel-forming domain that facilitates the translocation of N-terminal passenger domain whose functions range from adhesion to proteolysis. Genetic replacement of the native passenger domain with heterologous proteins is an attractive strategy not only for applications such as biocatalysis, live-cell vaccines, and protein engineering but also for gaining mechanistic insights toward understanding AT translocation. The ability of ATs to efficiently display functional recombinant proteins containing multiple disulfides has remained largely controversial. By employing high-throughput single-cell flow cytometry, we have systematically investigated the ability of the Escherichia coli AT Antigen 43 (Ag43) to display two different recombinant reporter proteins, a single-chain antibody (M18 scFv) that contains two disulfides and chymotrypsin that contains four disulfides, by varying the signal peptide and deleting the different domains of the native protein. Our results indicate that only the C-terminal β-barrel and the threaded α-helix are essential for efficient surface display of functional recombinant proteins containing multiple disulfides. These results imply that there are no inherent constraints for functional translocation and display of disulfide bond-containing proteins mediated by the AT system and should open new avenues for protein display and engineering. PMID:23019324

  2. Anaplasma marginale major surface protein 1a directs cell surface display of tick BM95 immunogenic peptides on Escherichia coli.

    Science.gov (United States)

    Canales, Mario; Almazán, Consuelo; Pérez de la Lastra, José M; de la Fuente, José

    2008-07-31

    The surface display of heterologous proteins on live Escherichia coli using anchoring motifs from outer membranes proteins has impacted on many areas of biochemistry, molecular biology and biotechnology. The Anaplasma marginale major surface protein 1a (MSP1a) contains N-terminal surface-exposed repeated peptides (28-289 amino acids) that are involved in pathogen interaction with host cell receptors and is surface-displayed when the recombinant protein is expressed in E. coli. Therefore, it was predicted that MSP1a would surface display on E. coli peptides inserted in the N-terminal repeats region of the protein. The Rhipicephalus (Boophilus) microplus BM86 and BM95 glycoproteins are homologous proteins that protect cattle against tick infestations. In this study, we demonstrated that a recombinant protein comprising tick BM95 immunogenic peptides fused to the A. marginale MSP1a N-terminal region is displayed on the E. coli surface and is recognized by anti-BM86 and anti-MSP1a antibodies. This system provides a novel approach to the surface display of heterologous antigenic proteins on live E. coli and suggests the possibility to use the recombinant bacteria for immunization studies against cattle tick infestations. PMID:18582976

  3. Surface Display of Domain Ⅲ of Japanese Encephalitis Virus E Protein on Salmonella Typhimurium by Using an Ice Nucleation Protein

    Institute of Scientific and Technical Information of China (English)

    Jian-lin Dou; Tao Jing; Jing-jing Fan; Zhi-ming Yuan

    2011-01-01

    A bacterial cell surface display technique based on an ice nucleation protein has been employed for the development of live vaccine against viral infection.Due to its ubiquitous ability to invade host cells,Salmonella typhimurium might be a good candidate for displaying viral antigens.We demonstrated the surface display of domain III of Japanese encephalitis virus E protein and the enhanced green fluorescent protein on S.typhimurium BRD509 using the ice nucleation protein.The effects of the motif in the ice nucleation protein on the effective display of integral protein were also investigated.The results showed that display motifs in the protein can target integral foreign protein on the surface of S.typhimurium BRD509.Moreover,recombinant strains with surface displayed viral proteins retained their invasiveness,suggesting that the recombinant S.typhimurium can be used as live vaccine vector for eliciting complete immunogenicity.The data may yield better understanding of the mechanism by which ice nucleation protein displays foreign proteins in the Salmonella strain.

  4. Three-dimensional display: stereo and beyond

    Science.gov (United States)

    Dallas, William J.; Roehrig, Hans; Allen, Daniel J.

    2008-03-01

    With the advent of large, high-quality stereo display monitors and high-volume 3-D image acquisition sources, it is time to revisit the use of 3-D display for diagnostic radiology. Stereo displays may be goggled, or goggleless. Goggleless displays are called autostereographic displays. We concentrate on autostereographic technologies. Commercial LCD flat-screen 3-D autostereographic monitors typically rely on one of two techniques: blocked perspective and integral display. On the acquisition modality side: MRI, CT and 3-D ultrasound provide 3-D data sets. However, helical/spiral CT with multi-row detectors and multiple x-ray sources provides a monsoon of data. Presenting and analyzing this large amount of potentially dynamic data will require advanced presentation techniques. We begin with a very brief review the two stereo-display technologies. These displays are evolving beyond presentation of the traditional pair of views directed to fixed positions of the eyes to multi-perspective displays; at differing head positions, the eyes are presented with the proper perspective pairs corresponding to viewing a 3-D object from that position. In addition, we will look at some of the recent developments in computer-generated holograms or CGH's. CGH technology differs from the other two technologies in that it provides a wave-optically correct reproduction of the object. We then move to examples of stereo-displayed medical images and examine some of the potential strengths and weaknesses of the displays. We have installed a commercial stereo-display in our laboratory and are in the process of generating stereo-pairs of CT data. We are examining, in particular, preprocessing of the perspective data.

  5. Using Computer Vision to Access Appliance Displays

    OpenAIRE

    Fusco, Giovanni; Tekin, Ender; Ladner, Richard E.; Coughlan, James M.

    2014-01-01

    People who are blind or visually impaired face difficulties accessing a growing array of everyday appliances, needed to perform a variety of daily activities, because they are equipped with electronic displays. We are developing a “Display Reader” smartphone app, which uses computer vision to help a user acquire a usable image of a display, to address this problem. The current prototype analyzes video from the smartphone’s camera, providing real-time feedback to guide the user until a satisfa...

  6. Statistical Arbitrage Mining for Display Advertising

    OpenAIRE

    Zhang, Weinan; Wang, Jun

    2015-01-01

    We study and formulate arbitrage in display advertising. Real-Time Bidding (RTB) mimics stock spot exchanges and utilises computers to algorithmically buy display ads per impression via a real-time auction. Despite the new automation, the ad markets are still informationally inefficient due to the heavily fragmented marketplaces. Two display impressions with similar or identical effectiveness (e.g., measured by conversion or click-through rates for a targeted audience) may sell for quite diff...

  7. Media Sharing Across Public Display Networks

    OpenAIRE

    José, Rui; Jorge C. S. Cardoso; Hong, Jason

    2014-01-01

    In this work, we consider the scenario of an open display network in which people can post their content to a potentially large set of public displays. This raises the key challenge of how to associate that content with the displays that may provide a more meaningful context for its presentation. The main contribution of this work is a novel understanding of how different properties of the media sharing scenarios may impact their perceived value. We have conceived 24 media sharing scena...

  8. AMOLED as a green solution for display

    Science.gov (United States)

    Lin, Yu-Hsin; Hsu, Shih-Feng; Lee, Chung-Chun; Huang, Wei-Pang

    2009-08-01

    AMOLED(active matrix OLED) is known as the next generation display technology due to its better display quality, thin form factor, lower power consumption, etc. With increasing demand of environment-friendly technology, OLED had become a green solution for display. Additionally, due to its simple device structure, extra function could be easily integrated. In this paper, in-cell touch AMOLED is also described briefly.

  9. Recombinant DNA: History of the Controversy.

    Science.gov (United States)

    Vigue, Charles L.; Stanziale, William G.

    1979-01-01

    The hazards associated with recombinant DNA research are presented along with some social implications and the development of recombinant DNA research guidelines by the National Institutes of Health. (SA)

  10. Recombinant innovation and endogenous technological transitions

    NARCIS (Netherlands)

    K. Frenken; L.R. Izquierdo; P. Zeppini

    2012-01-01

    We propose a model of technological transitions based on two different types of innovations. Branching innovations refer to technological improvements along a particular path, while recombinant innovations represent fusions of multiple paths. Recombinant innovations create "short-cuts" which reduce

  11. Live recombinant BHV/BRSV vaccine

    NARCIS (Netherlands)

    Keil, G.M.; Rijsewijk, F.A.M.

    1998-01-01

    The present invention refers to synthetic Bovine Respiratory Syncytium virus genes. Also the invention relates to live attenuated Bovine Herpesvirus recombinants carrying such synthetic genes. Furthermore, the invention relates to vaccines based on these live attenuated recombinants, for the protect

  12. Digital image display system for emergency room

    International Nuclear Information System (INIS)

    This paper reports on a digital image display system for the emergency room (ER) in a major trauma hospital. Its objective is to reduce radiographic image delivery time to a busy ER while simultaneously providing a multimodality capability. Image storage, retrieval, and display will also be facilitated with this system. The system's backbone is a token-ring network of RISC and personal computers. The display terminals are higher- function RISC computers with 1,0242 color or gray-scale monitors. The PCs serve as administrative terminals. Nuclear medicine, CT, MR, and digitized film images are transferred to the image display system

  13. Pengaruh Display Produk pada Keputusan Pembelian Konsumen

    Directory of Open Access Journals (Sweden)

    Ina Melati

    2012-10-01

    Full Text Available Most of ritel outlet recently using product display as a one of their best marketing strategy, the reason is quiet easy to be understood, since consumers are too easy to be teased by those kind of beautiful product display that is being displayed by the retail outlet. The good retail outlets are trying their best to design and make the very good product display, so they can attract more consumers and make them not thinking twice to visit their store and purchase lots of thing. Clearly seeing that an attractive product design is able to influence a consumer to make a buying decision.

  14. New ultraportable display technology and applications

    Science.gov (United States)

    Alvelda, Phillip; Lewis, Nancy D.

    1998-08-01

    MicroDisplay devices are based on a combination of technologies rooted in the extreme integration capability of conventionally fabricated CMOS active-matrix liquid crystal display substrates. Customized diffraction grating and optical distortion correction technology for lens-system compensation allow the elimination of many lenses and systems-level components. The MicroDisplay Corporation's miniature integrated information display technology is rapidly leading to many new defense and commercial applications. There are no moving parts in MicroDisplay substrates, and the fabrication of the color generating gratings, already part of the CMOS circuit fabrication process, is effectively cost and manufacturing process-free. The entire suite of the MicroDisplay Corporation's technologies was devised to create a line of application- specific integrated circuit single-chip display systems with integrated computing, memory, and communication circuitry. Next-generation portable communication, computer, and consumer electronic devices such as truly portable monitor and TV projectors, eyeglass and head mounted displays, pagers and Personal Communication Services hand-sets, and wristwatch-mounted video phones are among the may target commercial markets for MicroDisplay technology. Defense applications range from Maintenance and Repair support, to night-vision systems, to portable projectors for mobile command and control centers.

  15. Energy Awareness Displays - Making the Invisible Visible

    NARCIS (Netherlands)

    Börner, Dirk

    2011-01-01

    Börner, D. (2011). Energy Awareness Displays - Making the Invisible Visible. Presentation given at the Startbijeenkomst SURFnet Innovatieregeling Duurzaamheid & ICT. May, 13, 2011, Utrecht, The Netherlands.

  16. Microencapsulated Electrophoretic Films for Electronic Paper Displays

    Science.gov (United States)

    Amundson, Karl

    2003-03-01

    Despite the dominance of liquid crystal displays, they do not perform some functions very well. While backlit liquid crystal displays can offer excellent color performance, they wash out in bright lighting and suffer from high power consumption. Reflective liquid crystal displays have limited brightness, making these devices challenging to read for long periods of time. Flexible liquid crystal displays are difficult to manufacture and keep stable. All of these attributes (long battery lifetime, bright reflective appearance, compatibility with flexible substrates) are traits that would be found in an ideal electronic paper display - an updateable substitute for paper that could be employed in electronic books, newspapers, and other applications. I will discuss technologies that are being developed for electronic-paper-like displays, and especially on particle-based technologies. A microencapsulated electrophoretic display technology is being developed at the E Ink corporation. This display film offers offer high brightness and an ink-on-paper appearance, compatibility with flexible substrates, and image stability that can lead to very low power consumption. I will present some of the physical and chemical challenges associated with making display films with high performance.

  17. Recombinant baculovirus mediates dsRNA specific to rr2 delivery and its protective efficacy against WSSV infection.

    Science.gov (United States)

    Rattanarojpong, Triwit; Khankaew, Suthiwat; Khunrae, Pongsak; Vanichviriyakit, Rapeepun; Poomputsa, Kanokwan

    2016-07-10

    White spot syndrome virus (WSSV) is a major causative agent in shrimp farming. Consequently, RNAi technology is an effective strategy to prevent WSSV infection in shrimp especially dsRNA targeting to rr2 of WSSV. In an effort to develop dsRNA expression in shrimp for control of WSSV infection, we developed a recombinant baculovirus expressing recombinant VP28 as the gene delivery system to carry a gene encoding dsRNA specific to rr2 for triggering the RNAi process in shrimp. The results showed that the recombinant baculovirus harboring VP28 was able to express VP28 indicated by Western blot with polyclonal antibody specific to VP28. VP28 transcript was detected in shrimp hemocytes after co-culture hemocytes with the recombinant baculovirus displaying VP28. In addition, we found that shrimp injected with the recombinant baculovirus displaying VP28 and encoding dsRNA synthetic gene specific to rr2 (Bac-VP28-dsrr2) showed the lowest cumulative mortality (33%) at 14days post infection (dpi) when compared to shrimp injected with baculovirus displaying VP28 (Bac-VP28) (64% cumulative mortality) (pBac-VP28-dsrr2 also showed significantly lower WSSV copies than shrimp injected with Bac-VP28 (pBac-VP28-dsrr2 was effective in prevention of WSSV infection. Therefore, the results obtained here can be applied to the prevention of WSSV infection by mixing the recombinant baculovirus with shrimp feed in the future. PMID:27164257

  18. Effect of gamma radiation on retroviral recombination.

    OpenAIRE

    Hu, W S; Temin, H M

    1992-01-01

    To elucidate the mechanism(s) of retroviral recombination, we exposed virions to gamma radiation prior to infecting target cells. By using previously described spleen necrosis virus-based vectors containing multiple markers, recombinant proviruses were studied after a single round of retrovirus replication. The current models of retroviral recombination predict that breaking virion RNA should promote minus-strand recombination (forced copy-choice model), decrease or not affect plus-strand rec...

  19. Display format and highlight validity effects on search performance using complex visual displays

    Science.gov (United States)

    Donner, Kimberly A.; Mckay, Tim; O'Brien, Kevin M.; Rudisill, Marianne

    1991-01-01

    Display format and highlight validity were shown to affect visual display search performance; however, these studies were conducted on small, artificial displays of alphanumeric stimuli. A study manipulating these variables was conducted using realistic, complex Space Shuttle information displays. A 2x2x3 within-subjects analysis of variance found that search times were faster for items in reformatted displays than for current displays. The significant format by highlight validity interaction showed that there was little difference in response time to both current and reformatted displays when the highlight validity was applied; however, under the non or invalid highlight conditions, search times were faster with reformatted displays. Benefits of highlighting and reformatting displays to enhance search and the necessity to consider highlight validity and format characteristics in tandem for predicting search performance are discussed.

  20. [Recombination in Drosophila in space flight].

    Science.gov (United States)

    Filatova, L P; Vaulina, E N; Lapteva, N Sh; Grozdova, T Ia

    1988-04-01

    An experiment with Drosophila melanogaster males was performed aboard the Artificial Satellite "Kosmos-1667". Mutagenic effects of a 7-day space flight on intergene recombination in chromosome 2 were studied. The space flight factors decreased the frequency of recombination. A model experiment on a laboratory centrifuge demonstrated insignificant increase in recombination frequency caused by acceleration. PMID:3135244

  1. High-resolution display system for mammograms

    Science.gov (United States)

    Moskowitz, Michael J.; Huang, H. K.; Wang, Jun; Allen, Jeffrey; Sickles, Edward A.; Giles, Anthony

    1995-04-01

    A high resolution mammographic display station is implemented for clinical diagnosis and for a digital teaching file. The display consists of a specially designed, high resolution mammographic station which contains a connection to a 50 micron (variable spot size) laser film digitizer, two 2 K X 2.5 K display monitors, an image processor, a host computer, and a disk array for high speed image transfer to the display monitors. After digitization on a separate host computer, the files are immediately transferred to the display station and post- processed for viewing. The algorithm for post-processing of the digitized image applies a non- linear LUT to mimic the original film characteristics while taking into account the luminosity of the display monitors in an attempt to produce the highest digital image quality possible. Image processing functions for enhancing calcification and soft tissue are also available to assist the human observer in classification of objects within the image. Windowing and level controls are seamlessly integrated for each monitor, as well as magnification capabilities. For an image display at its full resolution (e.g., digitized at 100 microns), the magnification is accomplished with a roaming window utilizing simple 2X pixel replication. This has been found to be acceptable in preliminary tests with clinicians. Measurements of features on the 2 k displays are possible, as well. The display format accurately simulates mammographic viewing arrangements with automatic side-by-side historical, current, left and right craniocaudal, mediolateral, etc., view comparisons. This high resolution mammographic display is found to be essential for fast and accurate display of high resolution digitized mammograms. A digital mammographic teaching file has been designed and tested using this display architecture. The teaching file presents the case questions on the host display monitor, and the related images for each question are presented on the high

  2. Monitor displays in radiology: Part 2

    International Nuclear Information System (INIS)

    Monitor displays play an important role in modern radiology practice. Practicing radiologists need to be familiar with the various performance parameters of medical-grade displays. A certain amount of technical knowledge is useful when making purchasing decisions since the right choice of equipment can have a great impact on the accuracy, efficiency, and speed in the radiology department

  3. Monitor displays in radiology: Part 1

    International Nuclear Information System (INIS)

    Monitor displays are an integral part of today's radiology work environment, attached to workstations, USG, CT/MRI consoles and PACS terminals. For each modality and method of use, the correct display monitor needs to be deployed. It helps to have a basic understanding of how monitors work and what are the issues involved in their selection

  4. Additive and subtractive transparent depth displays

    NARCIS (Netherlands)

    Kooi, F.L.; Toet, A.

    2003-01-01

    Image fusion is the generally preferred method to combine two or more images for visual display on a single screen. We demonstrate that perceptual image separation may be preferable over perceptual image fusion for the combined display of enhanced and synthetic imagery. In this context image separat

  5. Language Display: Authenticating Claims to Social Identity.

    Science.gov (United States)

    Eastman, Carol M.; Stein, Roberta F.

    1993-01-01

    Discusses "language display," a language use strategy whereby members of one group lay claims to attributes associated with another, conveying messages of social, professional, ethnic identity. Examples from academia, politics, business, and advertising reveal language display functions as artifact of crossing linguistic boundaries without…

  6. A duality theorem for Dieudonne displays

    OpenAIRE

    Lau, Eike

    2008-01-01

    We show that the Zink equivalence between p-divisible groups and Dieudonne displays over a complete local ring with perfect residue field of characteristic p is compatible with duality. The proof relies on a new explicit formula for the p-divisible group associated to a Dieudonne display.

  7. New control system: displays on stations screens

    International Nuclear Information System (INIS)

    Setting applications display on control stations screens uses X-WINDOWS and graphic interface MOTIF. Representation of Y=f(x) and of data tables are displayed by the utilization P-GRAPHICS package using simplified functions of GOBE library routines. (A.B.). 1 fig

  8. Recent progress in flexible OLED displays

    Science.gov (United States)

    Hack, Michael G.; Weaver, Michael S.; Mahon, Janice K.; Brown, Julie J.

    2001-09-01

    Organic light emitting device (OLED) technology has recently been shown to demonstrate excellent performance and cost characteristics for use in numerous flat panel display (FPD) applications. OLED displays emit bright, colorful light with excellent power efficiency, wide viewing angle and video response rates. OLEDs are also demonstrating the requisite environmental robustness for a wide variety of applications. OLED technology is also the first FPD technology with the potential to be highly functional and durable in a flexible format. The use of plastic and other flexible substrate materials offers numerous advantages over commonly used glass substrates, including impact resistance, light weight, thinness and conformability. Currently, OLED displays are being fabricated on rigid substrates, such as glass or silicon wafers. At Universal Display Corporation (UDC), we are developing a new class of flexible OLED displays (FOLEDs). These displays also have extremely low power consumption through the use of electrophosphorescent doped OLEDs. To commercialize FOLED technology, a number of technical issues related to packaging and display processing on flexible substrates need to be addressed. In this paper, we report on our recent results to demonstrate the key technologies that enable the manufacture of power efficient, long-life flexible OLED displays for commercial and military applications.

  9. Selection of Recombinant Human Antibodies.

    Science.gov (United States)

    Tomszak, Florian; Weber, Susanne; Zantow, Jonas; Schirrmann, Thomas; Hust, Michael; Frenzel, André

    2016-01-01

    Since the development of therapeutic antibodies the demand of recombinant human antibodies is steadily increasing. Traditionally, therapeutic antibodies were generated by immunization of rat or mice, the generation of hybridoma clones, cloning of the antibody genes and subsequent humanization and engineering of the lead candidates. In the last few years, techniques were developed that use transgenic animals with a human antibody gene repertoire. Here, modern recombinant DNA technologies can be combined with well established immunization and hybridoma technologies to generate already affinity maturated human antibodies. An alternative are in vitro technologies which enabled the generation of fully human antibodies from antibody gene libraries that even exceed the human antibody repertoire. Specific antibodies can be isolated from these libraries in a very short time and therefore reduce the development time of an antibody drug at a very early stage.In this review, we describe different technologies that are currently used for the in vitro and in vivo generation of human antibodies. PMID:27236551

  10. Mechanisms of sister chromatid recombination

    International Nuclear Information System (INIS)

    Studies using T948 as a model system have been carried out aimed at elucidating the mechanism of sister chromatid recombination (SCR). Characterization of U.V. light- and x-ray-induced SCR, the relationiship between SCR induction and DNA repair using rad mutations, and the relationship between SCR induction and the time of cell division using cdc mutations are presented. It has been supposed that SCR is induced at the phase of S-G2 following DNA replication, that postreplication break of DNA strands is strongly involved in the induction of SCR, and that induction type of SCR, i.e., conversion type or recombination type, is dependent upon the type of molecular damage of DNA. (Namekawa, K.)

  11. Display-management system for MFTF

    International Nuclear Information System (INIS)

    The Mirror Fusion Test Facility (MFTF) is controlled by 65 local control microcomputers which are supervised by a local network of nine 32-bit minicomputers. Associated with seven of the nine computers are state-of-the-art graphics devices, each with extensive local processing capability. These devices provide the means for an operator to interact with the control software running on the minicomputers. It is critical that the information the operator views accurately reflects the current state of the experiment. This information is integrated into dynamically changing pictures called displays. The primary organizational component of the display system is the software-addressable segment. The segments created by the display creation software are managed by display managers associated with each graphics device. Each display manager uses sophisticated storage management mechanisms to keep the proper segments resident in the local graphics device storage

  12. Three-dimensional hologram display system

    Science.gov (United States)

    Mintz, Frederick (Inventor); Chao, Tien-Hsin (Inventor); Bryant, Nevin (Inventor); Tsou, Peter (Inventor)

    2009-01-01

    The present invention relates to a three-dimensional (3D) hologram display system. The 3D hologram display system includes a projector device for projecting an image upon a display medium to form a 3D hologram. The 3D hologram is formed such that a viewer can view the holographic image from multiple angles up to 360 degrees. Multiple display media are described, namely a spinning diffusive screen, a circular diffuser screen, and an aerogel. The spinning diffusive screen utilizes spatial light modulators to control the image such that the 3D image is displayed on the rotating screen in a time-multiplexing manner. The circular diffuser screen includes multiple, simultaneously-operated projectors to project the image onto the circular diffuser screen from a plurality of locations, thereby forming the 3D image. The aerogel can use the projection device described as applicable to either the spinning diffusive screen or the circular diffuser screen.

  13. Extraction and Analysis of Display Data

    Science.gov (United States)

    Land, Chris; Moye, Kathryn

    2008-01-01

    The Display Audit Suite is an integrated package of software tools that partly automates the detection of Portable Computer System (PCS) Display errors. [PCS is a lap top computer used onboard the International Space Station (ISS).] The need for automation stems from the large quantity of PCS displays (6,000+, with 1,000,000+ lines of command and telemetry data). The Display Audit Suite includes data-extraction tools, automatic error detection tools, and database tools for generating analysis spread sheets. These spread sheets allow engineers to more easily identify many different kinds of possible errors. The Suite supports over 40 independent analyses, 16 NASA Tech Briefs, November 2008 and complements formal testing by being comprehensive (all displays can be checked) and by revealing errors that are difficult to detect via test. In addition, the Suite can be run early in the development cycle to find and correct errors in advance of testing.

  14. Recombinations of Busy Beaver Machines

    OpenAIRE

    Bátfai, Norbert

    2009-01-01

    Many programmers belive that Turing-based machines cannot think. We also believe in this, however it is interesting to note that the most sophisticated machines are not programmed by human beings. We have only discovered them. In this paper, using well-known Busy Beaver and Placid Platypus machines, we generate further very similar, but not exactly the same machines. We have found a recombinated BB_5 machine which can make 70.740.809 steps before halting.

  15. Recombinant erythropoietin in clinical practice

    OpenAIRE

    Ng, T; Marx, G.; Littlewood, T; Macdougall, I

    2003-01-01

    The introduction of recombinant human erythropoietin (RHuEPO) has revolutionised the treatment of patients with anaemia of chronic renal disease. Clinical studies have demonstrated that RHuEPO is also useful in various non-uraemic conditions including haematological and oncological disorders, prematurity, HIV infection, and perioperative therapies. Besides highlighting both the historical and functional aspects of RHuEPO, this review discusses the applications of RHuEPO in clinical practice a...

  16. Recombinant antibodies and tumor targeting

    OpenAIRE

    Sheikholvaezin, Ali

    2006-01-01

    Different antibody derived constructs are rapidly advancing as putative tools for treatment of malignant diseases. Antibody engineering has added significant new technologies to modify size, affinities, solubility, stability and biodistribution properties for immunoconjugates. In the present thesis, the aim was to increase our knowledge on how new recombinant antibodies could be tailored to optimize localization to experimental tumors in mice. One hybridoma, producing the monoclonal antibody ...

  17. Workshop on Radio Recombination Lines

    CERN Document Server

    1980-01-01

    Since their first detection 15 years ago, radio recombination lines from several elements have been observed in a wide variety of objects including HII regions, planetary nebulae, molecular clouds, the diffuse interstellar medium, and recently, other galaxies. The observations span almost the entire range from 0.1 to 100 GHz, and employ both single­ djsh and aperture synthesis techniques. The theory of radio recombination lines has also advanced strongly, to the point where it is perhaps one of the best-understood in astro­ physics. In a parallel development, it has become possible over the last decade to study these same highly-excited atoms in the laboratory; this work provides further confirmation of the theoretical framework. However there has been continuing controversy over the astrophysical interpre­ tation of radio recombination line observations, especially regarding the role of stimulated emission. A workshop was held in Ottawa on 24-25 August, 1979, bringing together many of the active scientist...

  18. Avian leukosis virus is a versatile eukaryotic platform for polypeptide display

    International Nuclear Information System (INIS)

    Display technology refers to methods of generating libraries of modularly coded biomolecules and screening them for particular properties. Retroviruses are good candidates to be a eukaryotic viral platform for the display of polypeptides synthesized in eukaryotic cells. Here we demonstrate that avian leukosis virus (ALV) provides an ideal platform for display of nonviral polyaeptides expressed in a eukaryotic cell substrate. Different sizes of polypeptides were genetically fused to the extreme N-terminus of the ALV envelope glycoprotein in an ALV infectious clone containing an alkaline phosphatase reporter gene. The chimeric envelope glycoproteins were efficiently incorporated into virions and were stably displayed on the surface of the virions through multiple virus replication cycles. The foreign polypeptides did not interfere with the attachment and entry functions of the underlying ALV envelope glycoproteins. The displayed polypeptides were fully functional and could efficiently mediate attachment of the recombinant viruses to their respective cognate receptors. This study demonstrates that ALV is an ideal display platform for the generation and selection of libraries of polypeptides where there is a need for expression, folding, and posttranslational modification in the endoplasmic reticulum of eukaryotic cells

  19. Effect of gamma radiation on retroviral recombination.

    Science.gov (United States)

    Hu, W S; Temin, H M

    1992-07-01

    To elucidate the mechanism(s) of retroviral recombination, we exposed virions to gamma radiation prior to infecting target cells. By using previously described spleen necrosis virus-based vectors containing multiple markers, recombinant proviruses were studied after a single round of retrovirus replication. The current models of retroviral recombination predict that breaking virion RNA should promote minus-strand recombination (forced copy-choice model), decrease or not affect plus-strand recombination (strand displacement/assimilation model), and shift plus-strand recombination towards the 3' end of the genome. However, we found that while gamma irradiation of virions reduced the amount of recoverable viral RNA, it did not primarily cause breaks. Thus, the frequency of selected recombinants was not significantly altered with greater doses of radiation. In spite of this, the irradiation did decrease the number of recombinants with only one internal template switch. As a result, the average number of additional internal template switches in the recombinant proviruses increased from 0.7 to 1.4 as infectivity decreased to 6%. The unselected internal template switches tended to be 5' of the selected crossover even in the recombinants from irradiated viruses, inconsistent with a plus-strand recombination mechanism. PMID:1602553

  20. Remote display of neutron area monitor readout

    International Nuclear Information System (INIS)

    For monitoring neutron radiation during accelerator operation, a large number of neutron detectors are installed at various locations in the accelerator hall and user areas. The neutrons are detected using BF3 gas filled proportional counters (Vbias=1.1 kV) and the measured count rate is displayed locally on an analog meter. It is desirable to have a neutron count rate display at the accelerator console to enable a swift corrective action, if required. With this motivation a PIC18F4520 microcontroller based remote display unit for neutron area monitors is developed. The remote display unit is compact and is mounted on the existing neutron area monitor panel. The signal from the neutron detector is processed and digitized by the controller. The digitized count rate and status is also displayed locally using a LCD panel. An audible alarm is triggered at local units if the count rate exceeds pre-set limit. Each remote display unit has an unique IP address and acts as a server to the client PC. The digitized data is sent through a dedicated LAN network using a serial Ethernet server. Using LabVIEWTM with TCP/IP, data can be communicated to multiple gateways. The GUI based on LabVIEW makes the system user friendly and expandable. This inexpensive and simple remote display unit can be adopted to any facility. (author)

  1. Flexible display technology for the objective force

    Science.gov (United States)

    Pellegrino, John M.; Wood, Gary L.; Morton, David C.; Forsythe, Eric W.; Girolamo, Henry J.

    2003-09-01

    The Army has initiated a flexible display research program. This program is part of the Army's strategy to create technologies that will enable revolutionary designs and transformational weapons systems for the Objective Force. The ARL flexible display program is more general than just for the dismounted soldier-it will also have implications for air and vehicular crews, and for the other services, even though it is not a DoD tri-service program per se. "Flexible" is defined in the program as displays that operate under conditions from conformal applications, limited flexing, to rollable displays for compact storage. The Army program will include display manufacturing concepts that enable roll-to-roll processes reduce cost, to tap a strong U.S. domestic industrial strength, and, eventually, to enable fabrication of very large sizes. There is commercial interest in flexible displays for applications ranging from wearable electronics for road-warriors and gamers to large screen 71-in. 1920x1200 color pixel consumer high definition television sets for walls. Industry willingness to cost share will be a key criterion in identifying investment opportunities that are necessary and timely from among all that may be envisioned. Some anticipated military applications and a roadmap are presented that identify the technology barriers at the materials, device and manufacturing levels to the creation of flexible display technology.

  2. The display of portable infrared measuring temperature

    Science.gov (United States)

    Qian, Yitao; Gu, Guohua; Sui, Xiubao

    2014-11-01

    In recent years based on security, quality supervision, inspection and medical for the urgent need of infrared temperature measurement and infrared display technology, coupled with embedded system to achieve rapid development, which is widely used in the electronic products and the field of intelligent instruments and industrial control, this paper has designed a kind of more comprehensive, more efficient and more intuitive infrared thermometer. Unlike previous handheld infrared thermometer, we regard an embedded Linux system as the system, with its open source code, support most mainstream hardware platforms, unified peripheral interface and can be customized, to build an embedded infrared system that has provided strong system support; the pseudocolor techniques and Qt interface display technology make the image more colorful and the picture function more diverse; With ARM microprocessor as the display and temperature measuring platform, it costs reduction and reduce volume and power consumption; the FrameBuffer interface technology and multithreading technology realize the smooth real-time display. And ultimately the display size of real-time infrared image is 640 * 480 at a speed of 25 frames / sec. What is more, display is equipped with the menu option so that thermometer can be required to complete the operation through the button. The temperature display system aims at small volume, easy to use and flexible. I believe this thermometer will have a good application prospect.

  3. SNS online display technologies for EPICS

    International Nuclear Information System (INIS)

    The ubiquitousness of web clients from personal computers to cell phones results in a growing demand for web-based access to control system data. At the Oak Ridge National Laboratory Spallation Neutron Source (SNS) we have investigated different technical approaches to provide read access to data in the Experimental Physics and Industrial Control System (EPICS) for a wide variety of web client devices. The core web technology, HTTP, is less than ideal for online control system displays. Appropriate use of Ajax, especially the Long Poll paradigm, can alleviate fundamental HTTP limitations. The SNS Status web uses basic Ajax technology to generate generic displays for a wide audience. The Dashboard uses Long Poll and more client-side Java-Script to offer more customization and faster updates for users that need specialized displays. The Web OPI uses RAP for web access to any BOY display, offering utmost flexibility because users can create their own BOY displays in CSS. These three approaches complement each other. Users can access generic status displays with zero effort, invest time in creating their fully customized displays for the Web OPI, or use the Dashboard as an intermediate solution

  4. A variable-collimation display system

    Science.gov (United States)

    Batchko, Robert; Robinson, Sam; Schmidt, Jack; Graniela, Benito

    2014-03-01

    Two important human depth cues are accommodation and vergence. Normally, the eyes accommodate and converge or diverge in tandem; changes in viewing distance cause the eyes to simultaneously adjust both focus and orientation. However, ambiguity between accommodation and vergence cues is a well-known limitation in many stereoscopic display technologies. This limitation also arises in state-of-the-art full-flight simulator displays. In current full-flight simulators, the out-the-window (OTW) display (i.e., the front cockpit window display) employs a fixed collimated display technology which allows the pilot and copilot to perceive the OTW training scene without angular errors or distortions; however, accommodation and vergence cues are limited to fixed ranges (e.g., ~ 20 m). While this approach works well for long-range, the ambiguity of depth cues at shorter range hinders the pilot's ability to gauge distances in critical maneuvers such as vertical take-off and landing (VTOL). This is the first in a series of papers on a novel, variable-collimation display (VCD) technology that is being developed under NAVY SBIR Topic N121-041 funding. The proposed VCD will integrate with rotary-wing and vertical take-off and landing simulators and provide accurate accommodation and vergence cues for distances ranging from approximately 3 m outside the chin window to ~ 20 m. A display that offers dynamic accommodation and vergence could improve pilot safety and training, and impact other applications presently limited by lack of these depth cues.

  5. Integral 3D display using multiple LCDs

    Science.gov (United States)

    Okaichi, Naoto; Miura, Masato; Arai, Jun; Mishina, Tomoyuki

    2015-03-01

    The quality of the integral 3D images created by a 3D imaging system was improved by combining multiple LCDs to utilize a greater number of pixels than that possible with one LCD. A prototype of the display device was constructed by using four HD LCDs. An integral photography (IP) image displayed by the prototype is four times larger than that reconstructed by a single display. The pixel pitch of the HD display used is 55.5 μm, and the number of elemental lenses is 212 horizontally and 119 vertically. The 3D image pixel count is 25,228, and the viewing angle is 28°. Since this method is extensible, it is possible to display an integral 3D image of higher quality by increasing the number of LCDs. Using this integral 3D display structure makes it possible to make the whole device thinner than a projector-based display system. It is therefore expected to be applied to the home television in the future.

  6. Brief history of electronic stereoscopic displays

    Science.gov (United States)

    Lipton, Lenny

    2012-02-01

    A brief history of recent developments in electronic stereoscopic displays is given concentrating on products that have succeeded in the market place and hence have had a significant influence on future implementations. The concentration is on plano-stereoscopic (two-view) technology because it is now the dominant display modality in the marketplace. Stereoscopic displays were created for the motion picture industry a century ago, and this technology influenced the development of products for science and industry, which in turn influenced product development for entertainment.

  7. Adscape: Harvesting and Analyzing Online Display Ads

    OpenAIRE

    Barford, Paul; Canadi, Igor; Krushevskaja, Darja; Ma, Qiang; Muthukrishnan, S.

    2014-01-01

    Over the past decade, advertising has emerged as the primary source of revenue for many web sites and apps. In this paper we report a first-of-its-kind study that seeks to broadly understand the features, mechanisms and dynamics of display advertising on the web - i.e., the Adscape. Our study takes the perspective of users who are the targets of display ads shown on web sites. We develop a scalable crawling capability that enables us to gather the details of display ads including creatives an...

  8. Display of fungal hydrophobin on the Pichia pastoris cell surface and its influence on Candida antarctica lipase B.

    Science.gov (United States)

    Wang, Pan; He, Jie; Sun, Yufei; Reynolds, Matthew; Zhang, Li; Han, Shuangyan; Liang, Shuli; Sui, Haixin; Lin, Ying

    2016-07-01

    To modify the Pichia pastoris cell surface, two classes of hydrophobins, SC3 from Schizophyllum commune and HFBI from Trichoderma reesei, were separately displayed on the cell wall. There was an observable increase in the hydrophobicity of recombinant strains. Candida antarctica lipase B (CALB) was then co-displayed on the modified cells, generating strains GS115/SC3-61/CALB-51 and GS115/HFBI-61/CALB-51. Interestingly, the hydrolytic and synthetic activities of strain GS115/HFBI-61/CALB-51 increased by 37 and 109 %, respectively, but decreased by 26 and 43 %, respectively, in strain GS115/SC3-61/CALB-51 compared with the hydrophobin-minus recombinant strain GS115/CALB-GCW51. The amount of glycerol by-product from the transesterification reaction adsorbed on the cell surface was significantly decreased following hydrophobin modification, removing the glycerol barrier and allowing substrates to access the active sites of lipases. Electron micrographs indicated that the cell wall structures of both recombinant strains appeared altered, including changes to the inner glucan layer and outer mannan layer. These results suggest that the display of hydrophobins can change the surface structure and hydrophobic properties of P. pastoris and affect the catalytic activities of CALB displayed on the surface of P. pastoris cells. PMID:26969039

  9. Selection of a peptide mimicking neutralization epitope of hepatitis E virus with phage peptide display technology

    Institute of Scientific and Technical Information of China (English)

    Ying Gu; Jun Zhang; Ying-Bing Wang; Shao-Wei Li; Hai-Jie Yang; Wen-Xin Luo; Ning-Shao Xia

    2004-01-01

    AIM: To select the peptide mimicking the neutralization epitope of hepatitis E virus which bound to non-type-specific and conformational monoclonal antibodies (mAbs) 8C11 and 8H3 fromed 7-peptide phage display library, and expressed the peptide recombinant with HBcAg in E.coli, and to observe whether the recombinant HBcAg could still form virus like particle (VLP) and to test the activation of the recombinant polyprotein and chemo-synthesized peptide that was selected by mAb 8H3.METHODS: 8C11 and 8H3 were used to screen for binding peptides through a 7-peptide phage display library. After 4rounds of panning, monoclonal phages were selected and sequenced. The obtained dominant peptide coding sequences was then synthesized and inserted into amino acid 78 to 83 of hepatitis B core antigen (HBcAg), and then expressed in E. coli. Activity of the recombinant proteins was detected by Western blotting, VLPs of the recombinant polyproteins were tested by transmission electron microscopy and binding activity of the chemo-synthesized peptide was confirmed by BIAcore biosensor.RESULTS: Twenty-one positive monoclonal phages (10for 8CL1, and 11 for 8H3) were selected and the inserted fragments were sequenced. The DNA sequence coding for the obtained dominant peptides 8C11 (N′-His-Pro-Thr-LeuLeu-Arg-Ile-C′, named 8C11A) and 8H3 (N′-Ser-Ile-LeuPro- Tyr-Pro-Tyr-C′, named 8H3A) were then synthesized and cloned to the HBcAg vector, then expressed in E. coli.The recombinant proteins aggregated into homodimer or polymer on SDS-PAGE, and could bind to mAb 8C11 and 8H3 in Western blotting. At the same time, the recombinant polyprotein could form virus like particles (VLPs), which could be visualized on electron micrograph. The dominant peptide 8H3A selected by mAb 8H3 was further chemosynthesized, and its binding to mAb 8H3 could be detected by BIAcore biosensor.CONCLUSION: These results implicate that conformational neutralizing epitope can be partially modeled by a short

  10. Display depth analyses with the wave aberration for the auto-stereoscopic 3D display

    Science.gov (United States)

    Gao, Xin; Sang, Xinzhu; Yu, Xunbo; Chen, Duo; Chen, Zhidong; Zhang, Wanlu; Yan, Binbin; Yuan, Jinhui; Wang, Kuiru; Yu, Chongxiu; Dou, Wenhua; Xiao, Liquan

    2016-07-01

    Because the aberration severely affects the display performances of the auto-stereoscopic 3D display, the diffraction theory is used to analyze the diffraction field distribution and the display depth through aberration analysis. Based on the proposed method, the display depth of central and marginal reconstructed images is discussed. The experimental results agree with the theoretical analyses. Increasing the viewing distance or decreasing the lens aperture can improve the display depth. Different viewing distances and the LCD with two lens-arrays are used to verify the conclusion.

  11. Study on the visibility of an electroluminescent display for automobiles; Jidoshayo EL display no shininsei

    Energy Technology Data Exchange (ETDEWEB)

    Matsumoto, N.; Harada, M.; Idogaki, T. [Denso Corp., Aichi (Japan)

    1997-10-01

    This report explores the visibility of an Electroluminescent (EL) display for automotive use. Displays for automobiles are exposed to the direct rays of the sun and forced to operate in wide temperature range. Therefore, luminous flux density by the lighting on EL display panel and operating environment temperature must be considered for the visibility evaluation. Sensory evaluation on the visibility and physical measurements such as contrast, chromaticity difference in accordance with the viewing angle change indicate that the visibility of the EL display for automobiles is advantageous over other displays. 6 refs., 11 figs., 1 tab.

  12. Current trends of HIV recombination worldwide

    Directory of Open Access Journals (Sweden)

    Katherine A. Lau

    2013-06-01

    Full Text Available One of the major characteristics of HIV-1 is its high genetic variability and extensive heterogeneity. This characteristic is due to its molecular traits, which in turn allows it to vary, recombine, and diversify at a high frequency. As such, it generates complex molecular forms, termed recombinants, which evade the human immune system and so survive. There is no sequence constraint to the recombination pattern as it appears to occur at inter-group (between groups M and O, as well as inter- and intra-subtype within group M. Rapid emergence and active global transmission of HIV-1 recombinants, known as circulating recombinant forms (CRFs and unique recombinant forms (URFs, requires urgent attention. To date, 55 CRFs have been reported around the world. The first CRF01_AE originated from Central Africa but spread widely in Asia. The most recent CRF; CRF55_01B is a recombinant form of CRF01_AE and subtype B, although its origin is yet to be publicly disclosed. HIV-1 recombination is an ongoing event and plays an indispensable role in HIV epidemics in different regions. Africa, Asia and South America are identified as recombination hot-spots. They are affected by continual emergence and co-circulation of newly emerging CRFs and URFs, which are now responsible for almost 20% of HIV-1 infections worldwide. Better understanding of recombinants is necessary to determine their biological and molecular attributes.

  13. Bacteriophage recombination systems and biotechnical applications.

    Science.gov (United States)

    Nafissi, Nafiseh; Slavcev, Roderick

    2014-04-01

    Bacteriophage recombination systems have been widely used in biotechnology for modifying prokaryotic species, for creating transgenic animals and plants, and more recently, for human cell gene manipulation. In contrast to homologous recombination, which benefits from the endogenous recombination machinery of the cell, site-specific recombination requires an exogenous source of recombinase in mammalian cells. The mechanism of bacteriophage evolution and their coexistence with bacterial cells has become a point of interest ever since bacterial viruses' life cycles were first explored. Phage recombinases have already been exploited as valuable genetic tools and new phage enzymes, and their potential application to genetic engineering and genome manipulation, vectorology, and generation of new transgene delivery vectors, and cell therapy are attractive areas of research that continue to be investigated. The significance and role of phage recombination systems in biotechnology is reviewed in this paper, with specific focus on homologous and site-specific recombination conferred by the coli phages, λ, and N15, the integrase from the Streptomyces phage, ΦC31, the recombination system of phage P1, and the recently characterized recombination functions of Yersinia phage, PY54. Key steps of the molecular mechanisms involving phage recombination functions and their application to molecular engineering, our novel exploitations of the PY54-derived recombination system, and its application to the development of new DNA vectors are discussed. PMID:24442504

  14. Predictive displays to improve situation awareness

    NARCIS (Netherlands)

    Breda, L. van

    1999-01-01

    Uit een simulator experiment bleek dat bij het varen met een geïntegreerd navigatie display op basis van de voorspelde manoeuvreer-marges de overschrijding van de minimum veiligheidsafstand tot andere verkeersdeelnemers met een factor vier reduceert

  15. Optimal cooperative control synthesis of active displays

    Science.gov (United States)

    Garg, S.; Schmidt, D. K.

    1985-01-01

    A technique is developed that is intended to provide a systematic approach to synthesizing display augmentation for optimal manual control in complex, closed-loop tasks. A cooperative control synthesis technique, previously developed to design pilot-optimal control augmentation for the plant, is extended to incorporate the simultaneous design of performance enhancing displays. The technique utilizes an optimal control model of the man in the loop. It is applied to the design of a quickening control law for a display and a simple K/s(2) plant, and then to an F-15 type aircraft in a multi-channel task. Utilizing the closed loop modeling and analysis procedures, the results from the display design algorithm are evaluated and an analytical validation is performed. Experimental validation is recommended for future efforts.

  16. Introduction to tactile displays in military environments

    NARCIS (Netherlands)

    Erp, J.B.F. van; Self, B.P.

    2008-01-01

    Challenging situations, such as those encountered by military pilots, are often a major thrust for ergonomic innovation. Examples include the development of advanced, multimodal, and intuitive interface techniques to counteract the danger of visual, auditory, and cognitive overload. Tactile displays

  17. A display to support knowledge based behavior

    International Nuclear Information System (INIS)

    This paper reports on a computerized display that has been created for the Experimental Breeder Reactor II that incorporates information from plant sensors in a thermodynamic model display. The display is designed to provide an operator with an overall view of the plant process as a heat engine. The thermodynamics of the plant are depicted through the use of iconic figures, animated by plant signals, that are related to the major plant components and systems such as the reactor, intermediate heat exchanger, secondary system, evaporators, superheaters, steam system, steam drum, and turbine-generator. This display supports knowledge based reasoning for the operator as well as providing data for the traditional rule and skill based behavior, and includes side benefits such as inherent signal validation

  18. High Resolution Autostereoscopic Cockpit Display Project

    Data.gov (United States)

    National Aeronautics and Space Administration — During this Phase II program Dimension Technologies Inc. (DTI) proposes to design and build an autostereoscopic (glasses-free 3D) LCD based aircraft cockpit display...

  19. Three D displays in military applications

    Science.gov (United States)

    Trakalo, M.

    2009-05-01

    The evolution to 3D content is considered to be the next quantum leap in the movie industry, and is currently taking place. The prospect of the home entertainment industry adopting 3D is causing display manufacturers to develop 3D compatible products. In the past, 3D displays have often been limited by poor image quality. The current generation of 3D displays can have image quality that approaches that of their 2D counterparts. 3D content has found its way to the cinema and is seeking a way into the home, but will it have a place in the military environment? This paper discusses the current status of 3D display technology and its suitability to the military ground mobile environment. It includes an introduction to 3D visualization and examines issues such as implementation, image quality, and human factors.

  20. Compressive multi-mode superresolution display

    KAUST Repository

    Heide, Felix

    2014-01-01

    Compressive displays are an emerging technology exploring the co-design of new optical device configurations and compressive computation. Previously, research has shown how to improve the dynamic range of displays and facilitate high-quality light field or glasses-free 3D image synthesis. In this paper, we introduce a new multi-mode compressive display architecture that supports switching between 3D and high dynamic range (HDR) modes as well as a new super-resolution mode. The proposed hardware consists of readily-available components and is driven by a novel splitting algorithm that computes the pixel states from a target high-resolution image. In effect, the display pixels present a compressed representation of the target image that is perceived as a single, high resolution image. © 2014 Optical Society of America.

  1. Projection/Reflection Heads-up Display

    Data.gov (United States)

    National Aeronautics and Space Administration — To address the NASA need for an extravehicular activity (EVA) information display device, Physical Optics Corporation (POC) proposes to advance development of a new...

  2. Are tiled display walls needed for astronomy?

    CERN Document Server

    Meade, Bernard F; Manos, Steven; Sinnott, Richard O

    2014-01-01

    Clustering commodity displays into a Tiled Display Wall (TDW) provides a cost-effective way to create an extremely high resolution display, capable of approaching the image sizes now gen- erated by modern astronomical instruments. Astronomers face the challenge of inspecting single large images, many similar images simultaneously, and heterogeneous but related content. Many research institutions have constructed TDWs on the basis that they will improve the scientific outcomes of astronomical imagery. We test this concept by presenting sample images to astronomers and non- astronomers using a standard desktop display (SDD) and a TDW. These samples include standard English words, wide field galaxy surveys and nebulae mosaics from the Hubble telescope. These experiments show that TDWs provide a better environment for searching for small targets in large images than SDDs. It also shows that astronomers tend to be better at searching images for targets than non-astronomers, both groups are generally better when em...

  3. Night Vision Device and Cockpit Displays

    Data.gov (United States)

    Federal Laboratory Consortium — The Night Vision Device and Cockpit Display labevaluates night vision devices and certifies them for use in the fleet. Lab functions supported include: Analysis of...

  4. Interacting on and around Large Displays

    DEFF Research Database (Denmark)

    Markussen, Anders

    version of the keyboard even showed text entry rates of 28.1 WPM on the first session of an accelerated learning study where a limited set of phrases were repeatedly transcribed. Paper 3 build on the result from Paper 1 and Paper 2, and propose new directions for text entry research for large displays. To...... explore the potential interaction techniques supported by this novel tracking solution, and assess its potential to work as a new input modality for large displays. Finally, Paper 5 presents Off-Limits, a novel interaction concept for large displays that uses off-screen pointing to allow direct reach of...... focus of this thesis is on three aspects of large display interactions: (1) Improved Mid-Air Text Entry; (2) Improved Understanding of Input Modalities; and (3) Extended Boundaries of Interaction. To improve support for mid-air text entry, Paper 1 conducted a design space analysis, and three mid...

  5. Recent progress of flexible AMOLED displays

    Science.gov (United States)

    Pang, Huiqing; Rajan, Kamala; Silvernail, Jeff; Mandlik, Prashant; Ma, Ruiqing; Hack, Mike; Brown, Julie J.; Yoo, Juhn S.; Jung, Sang-Hoon; Kim, Yong-Cheol; Byun, Seung-Chan; Kim, Jong-Moo; Yoon, Soo-Young; Kim, Chang-Dong; Hwang, Yong-Kee; Chung, In-Jae; Fletcher, Mark; Green, Derek; Pangle, Mike; McIntyre, Jim; Smith, Randal D.

    2011-03-01

    Significant progress has been made in recent years in flexible AMOLED displays and numerous prototypes have been demonstrated. Replacing rigid glass with flexible substrates and thin-film encapsulation makes displays thinner, lighter, and non-breakable - all attractive features for portable applications. Flexible AMOLEDs equipped with phosphorescent OLEDs are considered one of the best candidates for low-power, rugged, full-color video applications. Recently, we have demonstrated a portable communication display device, built upon a full-color 4.3-inch HVGA foil display with a resolution of 134 dpi using an all-phosphorescent OLED frontplane. The prototype is shaped into a thin and rugged housing that will fit over a user's wrist, providing situational awareness and enabling the wearer to see real-time video and graphics information.

  6. Recent developments in DFD (depth-fused 3D) display and arc 3D display

    Science.gov (United States)

    Suyama, Shiro; Yamamoto, Hirotsugu

    2015-05-01

    We will report our recent developments in DFD (Depth-fused 3D) display and arc 3D display, both of which have smooth movement parallax. Firstly, fatigueless DFD display, composed of only two layered displays with a gap, has continuous perceived depth by changing luminance ratio between two images. Two new methods, called "Edge-based DFD display" and "Deep DFD display", have been proposed in order to solve two severe problems of viewing angle and perceived depth limitations. Edge-based DFD display, layered by original 2D image and its edge part with a gap, can expand the DFD viewing angle limitation both in 2D and 3D perception. Deep DFD display can enlarge the DFD image depth by modulating spatial frequencies of front and rear images. Secondly, Arc 3D display can provide floating 3D images behind or in front of the display by illuminating many arc-shaped directional scattering sources, for example, arcshaped scratches on a flat board. Curved Arc 3D display, composed of many directional scattering sources on a curved surface, can provide a peculiar 3D image, for example, a floating image in the cylindrical bottle. The new active device has been proposed for switching arc 3D images by using the tips of dual-frequency liquid-crystal prisms as directional scattering sources. Directional scattering can be switched on/off by changing liquid-crystal refractive index, resulting in switching of arc 3D image.

  7. Tailored displays to compensate for visual aberrations

    OpenAIRE

    Pamplona, Vitor F.; Oliveira, Manuel M.; Aliaga, Daniel G.; Raskar, Ramesh

    2012-01-01

    We introduce tailored displays that enhance visual acuity by decomposing virtual objects and placing the resulting anisotropic pieces into the subject's focal range. The goal is to free the viewer from needing wearable optical corrections when looking at displays. Our tailoring process uses aberration and scattering maps to account for refractive errors and cataracts. It splits an object's light field into multiple instances that are each in-focus for a given eye sub-aperture. Their integrati...

  8. Emotional body language displayed by artificial agents

    OpenAIRE

    Beck A; Stevens B.; Bard K.A.; Canamero L.

    2012-01-01

    Complex and natural social interaction between artificial agents (computer generated or robotic) and humans necessitates the display of rich emotions in order to be believable, socially relevant and accepted, and to generate the natural emotional responses that humans show in the context of social interaction, such as engagement or empathy. Whereas some robots use faces to display (simplified) emotional expressions, for other robots such as Nao, body language is the best medium available give...

  9. Interaction Analysis through Proteomic Phage Display

    OpenAIRE

    Sundell, Gustav N.; Ylva Ivarsson

    2014-01-01

    Phage display is a powerful technique for profiling specificities of peptide binding domains. The method is suited for the identification of high-affinity ligands with inhibitor potential when using highly diverse combinatorial peptide phage libraries. Such experiments further provide consensus motifs for genome-wide scanning of ligands of potential biological relevance. A complementary but considerably less explored approach is to display expression products of genomic DNA, cDNA, open readin...

  10. Beacon data acquisition and display system

    Science.gov (United States)

    Skogmo, David G.; Black, Billy D.

    1991-01-01

    A system for transmitting aircraft beacon information received by a secondary surveillance radar through telephone lines to a remote display includes a digitizer connected to the radar for preparing a serial file of data records containing position and identification information of the beacons detected by each sweep of the radar. This information is transmitted through the telephone lines to a remote computer where it is displayed.

  11. A simple detection method for low-affinity membrane protein interactions by baculoviral display.

    Directory of Open Access Journals (Sweden)

    Toshiko Sakihama

    Full Text Available BACKGROUND: Membrane protein interactions play an important role in cell-to-cell recognition in various biological activities such as in the immune or neural system. Nevertheless, there has remained the major obstacle of expression of the membrane proteins in their active form. Recently, we and other investigators found that functional membrane proteins express on baculovirus particles (budded virus, BV. In this study, we applied this BV display system to detect interaction between membrane proteins important for cell-to-cell interaction in immune system. METHODOLOGY/PRINCIPAL FINDINGS: We infected Sf9 cells with recombinant baculovirus encoding the T cell membrane protein CD2 or its ligand CD58 and recovered the BV. We detected specific interaction between CD2-displaying BV and CD58-displaying BV by an enzyme-linked immunosorbent assay (ELISA. Using this system, we also detected specific interaction between two other membrane receptor-ligand pairs, CD40-CD40 ligand (CD40L, and glucocorticoid-induced TNFR family-related protein (GITR-GITR ligand (GITRL. Furthermore, we observed specific binding of BV displaying CD58, CD40L, or GITRL to cells naturally expressing their respective receptors by flowcytometric analysis using anti-baculoviral gp64 antibody. Finally we isolated CD2 cDNA from a cDNA expression library by magnetic separation using CD58-displaying BV and anti-gp64 antibody. CONCLUSIONS: We found the BV display system worked effectively in the detection of the interaction of membrane proteins. Since various membrane proteins and their oligomeric complexes can be displayed on BV in the native form, this BV display system should prove highly useful in the search for natural ligands or to develop screening systems for therapeutic antibodies and/or compounds.

  12. CRMAGE: CRISPR Optimized MAGE Recombineering

    DEFF Research Database (Denmark)

    Ronda, Carlotta; Pedersen, Lasse Ebdrup; Sommer, Morten Otto Alexander;

    2016-01-01

    A bottleneck in metabolic engineering and systems biology approaches is the lack of efficient genome engineering technologies. Here, we combine CRISPR/Cas9 and λ Red recombineering based MAGE technology (CRMAGE) to create a highly efficient and fast method for genome engineering of Escherichia coli...... assembled by a USER-cloning approach enabling quick and cost efficient gRNA replacement. CRMAGE furthermore utilizes CRISPR/Cas9 for efficient plasmid curing, thereby enabling multiple engineering rounds per day. To facilitate the design process, a web-based tool was developed to predict both the λ Red...

  13. HDTV and large-screen display

    Science.gov (United States)

    Mitsuhashi, Tetsuo

    1990-08-01

    HDTV (known as Hi-Vision in Japan), with its ability to provide through high- definition pictures on a large screen display advanced psychological effects such as sensations of reality and a visual impact unobtainable in conventional television, is the television system of the next generation. In Japan, daily one-hour experimental broadcasting was initiated in June 1989 using the BS-2 broadcast satellite, and regular service is scheduled to begin via the BS-3 satellite to be launched in 1990. To this end, a home-use receiver using VLSIs has already been developed. Moreover, HDTV is currently being applied in such diverse areas as film production, printing and publishing, medicine, and art museums. The HDTV system handles approximately five times the information of conventional television. As a result, a large screen display capable of maintaining stable resolution greater than twice that of conventional displays is essential to the full realization of HDTV's vast potential. This paper will first discuss HDTV's basic parameters, concentrating on the psychovisual effects, and explain some preferable display characteristics from this psychovisual point of view. It will then discuss the technical problems in developing such a display, and final ly describe the current state of HDTV display development.

  14. SES cupola interactive display design environment

    Science.gov (United States)

    Vu, Bang Q.; Kirkhoff, Kevin R.

    1989-01-01

    The Systems Engineering Simulator, located at the Lyndon B. Johnson Space Center in Houston, Texas, is tasked with providing a real-time simulator for developing displays and controls targeted for the Space Station Freedom. These displays and controls will exist inside an enclosed workstation located on the space station. The simulation is currently providing the engineering analysis environment for NASA and contractor personnel to design, prototype, and test alternatives for graphical presentation of data to an astronaut while he performs specified tasks. A highly desirable aspect of this environment is to have the capability to rapidly develop and bring on-line a number of different displays for use in determining the best utilization of graphics techniques in achieving maximum efficiency of the test subject fulfilling his task. The Systems Engineering Simulator now has available a tool which assists in the rapid development of displays for these graphic workstations. The Display Builder was developed in-house to provide an environment which allows easy construction and modification of displays within minutes of receiving requirements for specific tests.

  15. Oil defect detection of electrowetting display

    Science.gov (United States)

    Chiang, Hou-Chi; Tsai, Yu-Hsiang; Yan, Yung-Jhe; Huang, Ting-Wei; Mang, Ou-Yang

    2015-08-01

    In recent years, transparent display is an emerging topic in display technologies. Apply in many fields just like mobile device, shopping or advertising window, and etc. Electrowetting Display (EWD) is one kind of potential transparent display technology advantages of high transmittance, fast response time, high contrast and rich color with pigment based oil system. In mass production process of Electrowetting Display, oil defects should be found by Automated Optical Inspection (AOI) detection system. It is useful in determination of panel defects for quality control. According to the research of our group, we proposed a mechanism of AOI detection system detecting the different kinds of oil defects. This mechanism can detect different kinds of oil defect caused by oil overflow or material deteriorated after oil coating or driving. We had experiment our mechanism with a 6-inch Electrowetting Display panel from ITRI, using an Epson V750 scanner with 1200 dpi resolution. Two AOI algorithms were developed, which were high speed method and high precision method. In high precision method, oil jumping or non-recovered can be detected successfully. This mechanism of AOI detection system can be used to evaluate the oil uniformity in EWD panel process. In the future, our AOI detection system can be used in quality control of panel manufacturing for mass production.

  16. Autostereoscopic video display with motion parallax

    Science.gov (United States)

    Hines, Stephen P.

    1997-05-01

    Described, is the HinesLab '3DTV,' a 3-dimensional video display which provides true stereo 3-D images, without glasses. Multiple viewers can move in front of the display, seeing true stereo images with motion parallax. Applications include 3-D video arcade games, avionics, engineering workstations, scientific visualization, video phones, and 3-D television. The display is built around a single liquid crystal panel, on which multiple images are projected to a screen where they form the 3-D image. The relationships of objects are confirmed in three dimensional space as the viewer moves through the viewing positions. The HinesLab autostereoscopic technology is transparent to the user. The 3DTV display can be produced economically because it uses a single display panel and conventional optics. The primary advantage of this technique is its simplicity. CGI images are supplied to the monitor with a single video board. Three- dimensional television can be broadcast by a single unmodified television station (NTSC, PAL, SECAM, HDTV, etc.), and recorded and replayed in 3-D with a VCR. From 4 - 21 eye positions can be created, with a range of resolution and viewing angles, limited only by currently available liquid- crystal display technology.

  17. Corruption of phage-display libraries by target-unrelated clones: Diagnosis and countermeasures

    Science.gov (United States)

    Thomas, William D.; Golomb, Miriam; Smith, George P.

    2010-01-01

    Phage display is used to discover peptides or proteins with a desired target property—most often, affinity for a target selector molecule. Libraries of phage clones displaying diverse surface peptides are subject to a selection process designed to enrich for the target behavior, and subsequently propagated to restore phage numbers. A recurrent problem is enrichment of clones, called target-unrelated phage (TUPs), that lack the target behavior. Many TUPs are propagation-related; they have mutations conferring a growth advantage, and are enriched during the propagations accompanying selection. Unlike other filamentous phage libraries, fd-tet-based libraries are relatively resistant to propagation-related TUP corruption. Their minus strand origin is disrupted by a large cassette that simultaneously confers resistance to tetracycline and imposes a rate-limiting growth defect that cannot be bypassed with simple mutations. Nonetheless, a new type of propagation-related TUP emerged in the output of in vivo selections from an fd-tet library. The founding clone had a complex rearrangement that restored the minus strand origin while retaining tetracycline resistance. The rearrangement involved two recombination events, one with a contaminant having a wild-type minus strand origin. The founder’s infectivity advantage spread by simple recombination to clones displaying different peptides. We propose measures for minimizing TUP corruption. PMID:20692225

  18. Peptide Phage Display as a Tool for Drug Discovery: Targeting Membrane Receptors

    Directory of Open Access Journals (Sweden)

    Tomaz Bratkovic

    2011-01-01

    Full Text Available Ligands selected from phage-displayed random peptide libraries tend to be directed to biologically relevant sites on the surface of the target protein. Consequently, peptides derived from library screenings often modulate the target protein’s activity in vitro and in vivo and can be used as lead compounds in drug design and as alternatives to antibodies for target validation in both genomics and drug discovery. This review discusses the use of phage display to identify membrane receptor modulators with agonistic or antagonistic activities. Because isolating or producing recombinant membrane proteins for use as target molecules in library screening is often impossible, innovative selection strategies such as panning against whole cells or tissues, recombinant receptor ectodomains, or neutralizing antibodies to endogenous binding partners were devised. Prominent examples from a two-decade history of peptide phage display will be presented, focusing on the design of affinity selection experiments, methods for improving the initial hits, and applications of the identified peptides.

  19. Comparison of 2 synthetically generated recombinant prions

    OpenAIRE

    Zhang, Yi; Wang, Fei; Wang, Xinhe; Zhang, Zhihong; Xu, Yuanyuan; Yu, Guohua; Yuan, Chonggang; Ma, Jiyan

    2014-01-01

    Prion is a protein-conformation-based infectious agent causing fatal neurodegenerative diseases in humans and animals. Our previous studies revealed that in the presence of cofactors, infectious prions can be synthetically generated in vitro with bacterially expressed recombinant prion protein (PrP). Once initiated, the recombinant prion is able to propagate indefinitely via serial protein misfolding cyclic amplification (sPMCA). In this study, we compared 2 separately initiated recombinant p...

  20. Impact of recombination on bacterial evolution

    OpenAIRE

    Didelot, Xavier; Maiden, Martin C. J.

    2010-01-01

    Genetic exchange plays a defining role in the evolution of many bacteria. The recent accumulation of nucleotide sequence data from multiple members of diverse bacterial genera has facilitated comparative studies that have revealed many features of this process. Here we focus on genetic exchange that has involved homologous recombination and illustrate how nucleotide sequence data have furthered our understanding of: (i) the frequency of recombination; (ii) the impact of recombination in diffe...

  1. Recombination rate variation in closely related species

    OpenAIRE

    Smukowski, C S; Noor, M A F

    2011-01-01

    Despite their importance to successful meiosis and various evolutionary processes, meiotic recombination rates sometimes vary within species or between closely related species. For example, humans and chimpanzees share virtually no recombination hotspot locations in the surveyed portion of the genomes. However, conservation of recombination rates between closely related species has also been documented, raising an apparent contradiction. Here, we evaluate how and why conflicting patterns of r...

  2. Role of ubiquitination in meiotic recombination repair

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Programmed and unprogrammed double-strand breaks (DSBs) often arise from such physiological requirements as meiotic recombination, and exogenous insults, such as ionizing radiation (IR). Due to deleterious impacts on genome stability, DSBs must be appropriately processed and repaired in a regulatory manner. Recent investigations have indicated that ubiquitination is a critical factor in DNA damage response and meiotic recombination repair. This review summarizes the effects of proteins and complexes associated with ubiquitination with regard to homologous recombination (HR)-dependent DSB repair.

  3. Consequences of recombination on traditional phylogenetic analysis

    DEFF Research Database (Denmark)

    Schierup, M H; Hein, J

    2000-01-01

    We investigate the shape of a phylogenetic tree reconstructed from sequences evolving under the coalescent with recombination. The motivation is that evolutionary inferences are often made from phylogenetic trees reconstructed from population data even though recombination may well occur (mtDNA or...... recombination leads to a large overestimation of the substitution rate heterogeneity and the loss of the molecular clock. These results are discussed in relation to viral and mtDNA data sets. Udgivelsesdato: 2000-Oct...

  4. RNA recombination in animal and plant viruses.

    OpenAIRE

    Lai, M M

    1992-01-01

    An increasing number of animal and plant viruses have been shown to undergo RNA-RNA recombination, which is defined as the exchange of genetic information between nonsegmented RNAs. Only some of these viruses have been shown to undergo recombination in experimental infection of tissue culture, animals, and plants. However, a survey of viral RNA structure and sequences suggests that many RNA viruses were derived form homologous or nonhomologous recombination between viruses or between viruses ...

  5. Monocular display unit for 3D display with correct depth perception

    Science.gov (United States)

    Sakamoto, Kunio; Hosomi, Takashi

    2009-11-01

    A study of virtual-reality system has been popular and its technology has been applied to medical engineering, educational engineering, a CAD/CAM system and so on. The 3D imaging display system has two types in the presentation method; one is a 3-D display system using a special glasses and the other is the monitor system requiring no special glasses. A liquid crystal display (LCD) recently comes into common use. It is possible for this display unit to provide the same size of displaying area as the image screen on the panel. A display system requiring no special glasses is useful for a 3D TV monitor, but this system has demerit such that the size of a monitor restricts the visual field for displaying images. Thus the conventional display can show only one screen, but it is impossible to enlarge the size of a screen, for example twice. To enlarge the display area, the authors have developed an enlarging method of display area using a mirror. Our extension method enables the observers to show the virtual image plane and to enlarge a screen area twice. In the developed display unit, we made use of an image separating technique using polarized glasses, a parallax barrier or a lenticular lens screen for 3D imaging. The mirror can generate the virtual image plane and it enlarges a screen area twice. Meanwhile the 3D display system using special glasses can also display virtual images over a wide area. In this paper, we present a monocular 3D vision system with accommodation mechanism, which is useful function for perceiving depth.

  6. Dissociative recombination of rare gas hydride ions: II. ArH+

    International Nuclear Information System (INIS)

    A storage ring measurement of the rate coefficient for the production of neutral Ar in e + ArH+ collisions is described. It is found that the recombination rate is too small to measure at low centre-of-mass energies but the combined rate coefficient for dissociative recombination and dissociative excitation increases above 2.5 eV displaying peaks centred at 7.5 eV, 16 and 26 eV. Calculated potential energy curves for the ground and excited states of ArH+ are presented and these aid in the elucidation of the recombination and excitation processes observed at higher energies. The implications for plasma modelling are discussed. (letter to the editor)

  7. Extensive HIV-1 intra-host recombination is common in tissues with abnormal histopathology.

    Directory of Open Access Journals (Sweden)

    Susanna L Lamers

    Full Text Available There is evidence that immune-activated macrophages infected with the Human Immunodeficiency Virus (HIV are associated with tissue damage and serve as a long-lived viral reservoir during therapy. In this study, we analyzed 780 HIV genetic sequences generated from 53 tissues displaying normal and abnormal histopathology. We found up to 50% of the sequences from abnormal lymphoid and macrophage rich non-lymphoid tissues were intra-host viral recombinants. The presence of extensive recombination, especially in non-lymphoid tissues, implies that HIV-1 infected macrophages may significantly contribute to the generation of elusive viral genotypes in vivo. Because recombination has been implicated in immune evasion, the acquisition of drug-resistance mutations, and alterations of viral co-receptor usage, any attempt towards the successful eradication of HIV-1 requires therapeutic approaches targeting tissue macrophages.

  8. PURE mRNA display for in vitro selection of single-chain antibodies.

    Science.gov (United States)

    Nagumo, Yu; Fujiwara, Kei; Horisawa, Kenichi; Yanagawa, Hiroshi; Doi, Nobuhide

    2016-05-01

    mRNA display is a method to form a covalent linkage between a cell-free synthesized protein (phenotype) and its encoding mRNA (genotype) through puromycin for in vitro selection of proteins. Although a wheat germ cell-free translation system has been previously used in our mRNA display system, a protein synthesis using recombinant elements (PURE) system is a more attractive approach because it contains no endogenous nucleases and proteases and is optimized for folding of antibodies with disulphide bonds. However, when we used the PURE system for mRNA display of single-chain Fv (scFv) antibodies, the formation efficiency of the mRNA-protein conjugates was quite low. To establish an efficient platform for the PURE mRNA display of scFv, we performed affinity selection of a library of scFv antibodies with a C-terminal random sequence and obtained C-terminal sequences that increased the formation of mRNA-protein conjugates. We also identified unexpected common substitution mutations around the start codon of scFv antibodies, which were inferred to destabilize the mRNA secondary structure. This destabilization causes an increase in protein expression and the efficiency of the formation of mRNA-protein conjugates. We believe these improvements should make the PURE mRNA display more efficient for selecting antibodies for diagnostic and therapeutic applications. PMID:26711234

  9. Human Insulin from Recombinant DNA Technology

    Science.gov (United States)

    Johnson, Irving S.

    1983-02-01

    Human insulin produced by recombinant DNA technology is the first commercial health care product derived from this technology. Work on this product was initiated before there were federal guidelines for large-scale recombinant DNA work or commercial development of recombinant DNA products. The steps taken to facilitate acceptance of large-scale work and proof of the identity and safety of such a product are described. While basic studies in recombinant DNA technology will continue to have a profound impact on research in the life sciences, commercial applications may well be controlled by economic conditions and the availability of investment capital.

  10. Experimental recombination rates for highly charged ions

    International Nuclear Information System (INIS)

    Recent studies of recombination between free electrons and highly charged ions using electron coolers of heavy-ion storage rings have produced accurate rate coefficients of interest for plasma modeling and diagnostics. Some surprises were discovered which can lead to revisions of recombination models. With bare ions one finds at low energy a strong and puzzling deviation from radiative recombination theory. Dielectronic recombination with C3+, N4+) show that jj coupling gives essential contributions to the cross section also for light ions. (author)

  11. New portable FELIX 3D display

    Science.gov (United States)

    Langhans, Knut; Bezecny, Daniel; Homann, Dennis; Bahr, Detlef; Vogt, Carsten; Blohm, Christian; Scharschmidt, Karl-Heinz

    1998-04-01

    An improved generation of our 'FELIX 3D Display' is presented. This system is compact, light, modular and easy to transport. The created volumetric images consist of many voxels, which are generated in a half-sphere display volume. In that way a spatial object can be displayed occupying a physical space with height, width and depth. The new FELIX generation uses a screen rotating with 20 revolutions per second. This target screen is mounted by an easy to change mechanism making it possible to use appropriate screens for the specific purpose of the display. An acousto-optic deflection unit with an integrated small diode pumped laser draws the images on the spinning screen. Images can consist of up to 10,000 voxels at a refresh rate of 20 Hz. Currently two different hardware systems are investigated. The first one is based on a standard PCMCIA digital/analog converter card as an interface and is controlled by a notebook. The developed software is provided with a graphical user interface enabling several animation features. The second, new prototype is designed to display images created by standard CAD applications. It includes the development of a new high speed hardware interface suitable for state-of-the- art fast and high resolution scanning devices, which require high data rates. A true 3D volume display as described will complement the broad range of 3D visualization tools, such as volume rendering packages, stereoscopic and virtual reality techniques, which have become widely available in recent years. Potential applications for the FELIX 3D display include imaging in the field so fair traffic control, medical imaging, computer aided design, science as well as entertainment.

  12. Trastuzumab-binding peptide display by Tobacco mosaic virus

    International Nuclear Information System (INIS)

    Human epidermal growth factor receptor-2 (HER2/neu) is a target for the humanized monoclonal antibody trastuzumab. Recently, trastuzumab-binding peptides (TBP) of HER2/neu that inhibit proliferation of breast cancer cells were identified. We have now studied conditions of efficient assembly in vivo of Tobacco mosaic virus (TMV)-based particles displaying TBP on its surface. The system is based on an Agrobacterium-mediated co-delivery of binary vectors encoding TMV RNA and coat protein (CP) with TBP in its C-terminal extension into plant leaves. We show how the fusion of amino acid substituted TBP (sTBP) to CP via a flexible peptide linker can improve the manufacturability of recombinant TMV (rTMV). We also reveal that rTMV particles with exposed sTBP retained trastuzumab-binding capacity but lost an anti-HER2/neu immunogenic scaffold function. Mouse antibodies against rTMV did not recognize HER2/neu on surface of human SK-BR-3 cells.

  13. Perceptual and social challenges in body proximate display ecosystems

    OpenAIRE

    Quigley, Aaron John; Grubert, Jens

    2015-01-01

    Coordinated multi-display environments from the desktop, second-screen to gigapixel display walls are increasingly common. Personal and intimate display devices such as head-mounted displays, smartwatches, smartphones and tablets are rarely part of such a multi-display ecosystem. This presents an opportunity to realise “body proximate” display environments, employing on and around the body displays. These can be formed by combining multiple handheld, head-mounted, wrist-worn or other personal...

  14. High level transient production of recombinant antibodies and antibody fusion proteins in HEK293 cells

    OpenAIRE

    Jäger, Volker; Büssow, Konrad; Wagner, Andreas; Weber, Susanne; Hust, Michael; Frenzel, André; Schirrmann, Thomas

    2013-01-01

    Background The demand of monospecific high affinity binding reagents, particularly monoclonal antibodies, has been steadily increasing over the last years. Enhanced throughput of antibody generation has been addressed by optimizing in vitro selection using phage display which moved the major bottleneck to the production and purification of recombinant antibodies in an end-user friendly format. Single chain (sc)Fv antibody fragments require additional tags for detection and are not as suitable...

  15. Development of recombinant antibody technology for application in plant pathogen diagnosis

    OpenAIRE

    Griep, R.A.

    1999-01-01

    This thesis describes the applicability of the novel phage display technique to select plant-pathogen-specific monoclonal antibodies (MAbs) from combinatorial antibody libraries. The retrieved MAbs are so specific that they can be used as diagnostic tools in sensitive immunoassays for the detection and identification of plant pathogens. Testing results, obtained from laboratories that have applied these recombinant MAbs, are discussed in this conclusive chapter.BackgroundIn the last decades, ...

  16. Holographic display with tilted spatial light modulator.

    Science.gov (United States)

    Kozacki, Tomasz

    2011-07-10

    In this paper, we analyze a holographic display system utilizing a phase-only spatial light modulator (SLM) based on liquid crystal on silicon (LCoS). An LCoS SLM works in reflection, and, in some applications, it is convenient to use with an inclined illumination. Even with a highly inclined illumination, the holographic display is capable of good-quality image generation. We show that the key to obtain high-quality reconstructions is the tilt-dependent calibration and algorithms. Typically, an LCoS SLM is illuminated with a plane wave with normal wave vector. We use inclined illumination, which requires development of new algorithms and display characterization. In this paper we introduce two algorithms. The first one is designed to process a digital hologram captured in CCD normal configuration, so it can be displayed in SLM tilted geometry, while the second one is capable of synthetic hologram generation for tilted SLM configuration. The inclined geometry asymmetrically changes the field of view of a holographic display. The presented theoretical analysis of the aliasing effect provides a formula for the field of view as a function of SLM tilt. The incidence angle affects SLM performance. Both elements of SLM calibration, i.e., pixel phase response and wavefront aberrations, strongly depend on SLM tilt angle. The effect is discussed in this paper. All of the discussions are accompanied with experimental results. PMID:21743569

  17. Micro-needle electro-tactile display.

    Science.gov (United States)

    Tezuka, Mayuko; Kitamura, Norihide; Miki, Norihisa

    2015-08-01

    Haptic feedback is strongly demanded for high-precision robot-assisted surgery and teleoperation. The haptic feedback consists of force and tactile feedback, however tactile feedback has been little studied and the size and weight of the system poses challenges for practical applications. In this paper we propose a sheet-type wearable electro-tactile display which provides tactile sensations to the user as the feedback at a low voltage and power consumption. The display possesses needle-shaped electrodes, which can penetrate through the high-impedance stratum corneum. We developed the fabrication process and, as the first step, we investigated the tactile sensation that can be created to the fingertip by the display. Rough and smooth surfaces were successfully presented to the user. Then, we characterized the tactile display when used on the forearm, in particular, with respect to the spatial resolution. These tactile displays can be used to inform the user of the surface property of the parts of interest, such as tumor tissues, and to guide him in the manipulation of surgery robots. PMID:26737606

  18. Novel Zn2+-chelating peptides selected from a fimbria-displayed random peptide library

    DEFF Research Database (Denmark)

    Kjærgaard, Kristian; Schembri, Mark; Klemm, Per

    2001-01-01

    The display of peptide sequences on the surface of bacteria is a technology that offers exciting applications in biotechnology and medical research. Type 1 fimbriae are surface organelles of Escherichia coli which mediate D-mannose-sensitive binding to different host surfaces by virtue of the Fim...... peptide sequences that conferred on recombinant cells the ability to bind Zn2+. By serial selection, sequences that exhibited various degrees of binding affinity and specificity toward Zn2+ were enriched. None of the isolated sequences showed similarity to known Zn2+-binding proteins, indicating that...

  19. Three-dimensional dynamic display research

    Science.gov (United States)

    Yan, Gao Bin; Yu, Jia; Liu, Hui-ping; Wang, Tian; Wang, Jin-cheng

    2014-11-01

    This paper proposes a new method for three-dimensional dynamic holographic display that combines computer generated holography (CGH) and holographic stereogram. Theoretically, three-dimensional (3D) dynamic holographic display can be achieved by using CGH alone, however the application of CGH is still limited because large amounts of data processing and complex mathematical calculation of off-axis diffracted light field. A new method combining CGH and stereogram is proposed, since stereogram uses a set of 2D images instead of a 3D object, both the complexity of the calculation and the resolution requirements of spatial light modulator (SLM) is reduced. To prove the feasibility of this method, experiments of making hologram using this method is carried out and the result shows that 3D displaying with a view angle of 28 is achieved.

  20. Broadband antireflection coatings for multifunctional avionic displays

    Science.gov (United States)

    Kumari, Neelam; Kumar, Mukesh; Rao, P. K.; Karar, Vinod; Sharma, Amit Lochan

    2015-06-01

    Broadband Multilayer Antireflection (AR) coatings markedly improve the transmission efficiency of any optical component such as lens, prism, beam-splitter, beam combiner or a window. By reducing surface reflections over a wide wavelength range, broadband antireflection coatings improve transmission and enhance contrast which is desired in avionic displays. The broadband antireflection coating consisting of MgF2, ZrO2 and Al2O3 were designed to cover the whole visible spectrum and fabricated on optical grade glass substrate. The optical characterization of these coatings indicates reduction of the reflection to 2.28% as compared to 8.5 % at 545 nm (i.e. design wavelength of most avionic displays) for bare substrate making them useful in optical displays for avionic applications.

  1. High performance visual display for HENP detectors

    CERN Document Server

    McGuigan, M; Spiletic, J; Fine, V; Nevski, P

    2001-01-01

    A high end visual display for High Energy Nuclear Physics (HENP) detectors is necessary because of the sheer size and complexity of the detector. For BNL this display will be of special interest because of STAR and ATLAS. To load, rotate, query, and debug simulation code with a modern detector simply takes too long even on a powerful work station. To visualize the HENP detectors with maximal performance we have developed software with the following characteristics. We develop a visual display of HENP detectors on BNL multiprocessor visualization server at multiple level of detail. We work with general and generic detector framework consistent with ROOT, GAUDI etc, to avoid conflicting with the many graphic development groups associated with specific detectors like STAR and ATLAS. We develop advanced OpenGL features such as transparency and polarized stereoscopy. We enable collaborative viewing of detector and events by directly running the analysis in BNL stereoscopic theatre. We construct enhanced interactiv...

  2. Large color gamut displays with diffraction gratings.

    Science.gov (United States)

    Aieta, Francesco; Morovič, Peter; Morovič, Ján; Fiorentino, Marco; Santori, Charles; Fattal, David

    2016-06-01

    The ability to display a broad variety of colors has great benefits not only in the context of entertainment but also as a means to streamline design in prototyping and manufacturing processes. Displays that use RGB filters or backlights cannot span all colors that occur in nature. To improve the accuracy of color reproduction, there have been attempts to include additional color primaries in displays. Existing solutions, however, have an impact on cost, scalability, and spatial resolution and are predominantly applicable to projection systems. We propose an approach based on combining diffraction grating extractors and the HANS imaging pipeline initially developed for printing. This combination offers unprecedented potential to attain large color gamuts with the same backlights commercially used today. PMID:27409441

  3. Photonic-crystal full-colour displays

    Science.gov (United States)

    Arsenault, André C.; Puzzo, Daniel P.; Manners, Ian; Ozin, Geoffrey A.

    2007-08-01

    In our information-rich world, it is becoming increasingly important to develop technologies capable of displaying dynamic and changeable data, for reasons ranging from value-added advertising to environmental sustainability. There is an intense drive at the moment towards paper-like displays, devices having a high reflectivity and contrast to provide viewability in a variety of environments, particularly in sunlight where emissive or backlit devices perform very poorly. The list of possible technologies is extensive, including electrophoretic, cholesteric liquid crystalline, electrochromic, electrodewetting, interferometric and more. Despite tremendous advances, the key drawback of all these existing display options relates to colour. As soon as an RGB (red, green and blue) colour filter or spatially modulated colour scheme is implemented, substantial light losses are inevitable even if the intrinsic reflectivity of the material is very good.

  4. Braille display device using soft actuator

    Science.gov (United States)

    Lee, Sangwon; Jung, Kwangmok; Koo, Jachoon; Lee, Sungil; Choi, Hoogon; Jeon, Jaewook; Nam, Jaedo; Choi, Hyoukryeol

    2004-07-01

    Tactile sensation is one of the most important sensory functions along with the auditory sensation for the visually impaired because it replaces the visual sensation of the persons with sight. In this paper, we present a tactile display device as a dynamic Braille display that is the unique tool for exchanging information among them. The proposed tactile cell of the Braille display is based on the dielectric elastomer and it has advantageous features over the existing ones with respect to intrinsic softness, ease of fabrication, cost effectiveness and miniaturization. We introduce a new idea for actuation and describe the actuating mechanism of the Braille pin in details capable of realizing the enhanced spatial density of the tactile cells. Finally, results of psychophysical experiments are given and its effectiveness is confirmed.

  5. Designer genes. Recombinant antibody fragments for biological imaging

    International Nuclear Information System (INIS)

    Monoclonal antibodies (MAbs), with high specificy and high affinity for their target antigens, can be utilized for delivery of agents such as radionuclides, enzymes, drugs or toxins in vivo. However, the implementation of radiolabeled antibodies as magic bullets for detection and treatment of diseases such as cancer has required addressing several shortcomings of murine MAbs. These include their immunogenicity, sub-optimal targeting and pharmacokinetic properties, and practical issues of production and radiolabeling. Genetic engineering provides a powerful approach for redesigning antibodies for use in oncologic applications in vivo. Recombinant fragments have been produced that retain high affinity for target antigens, and display a combination of rapid, high-level tumor targeting with concomitant clearance from normal tissues and the circulation in animal models. An important first step was cloning and engineering of antibody heavy and light chain variable domains into single-chain Fvs (molecular weight, 25-17 kDa), in which the variable regions are joined via a synthetic linker peptide sequence. Although scFvs themselves showed limited tumor uptake in preclinical and clinical studies, they provide a useful building block for intermediate sized recombinant fragments. Covalently linked dimers or non-covalent dimers of scFvs (also known as diabodies) show improved targeting and clearance properties due to their higher molecular weight (55kDa) and increased avidity. Further gains can be made by generation of larger recombinant fragments, such as the minibody, an scFv-CH3 fusion protein that self-assembles into a bivalent dimer of 80 kDa. A systematic evaluation of scFv, diabody, minibody, and intact antibody (based on comparison of tumor uptakes, tumor: blood activity ratios, and calculation of an Imaging Figure of Merit) can form the basis for selection of combinations of recombinant fragments and radionuclides for imaging applications. Ease of engineering and

  6. Heterogeneity in recombinant protein production

    DEFF Research Database (Denmark)

    Schalén, Martin; Johanson, Ted; Lundin, Luisa;

    2012-01-01

    A crucial step in biotechnology is the scale-up process. Normally, lab scale verification and optimization of production processes and strains are performed in small reactors with perfect mixing and hence the cells experience a homogenous environment. The gradients that occur in industrial scale...... bioreactors are often not taken into consideration in these experiments. Gradients occur due to insufficient mixing in the reactor, and affect the process in a variety of ways. When cells travel through the reactor and encounter different substrate concentrations, oxygen availability, pH, temperature, etc....... the cell physiology is affected. Cells are stressed, and this may severely affect growth, by-product accumulation, biomass yield and recombinant product yield. The stress caused by exposure to divergent microenvironments, genetic differences of individual cells, differing cell cycle stage and cell age...

  7. Next-generation head-mounted display

    Science.gov (United States)

    McGuire, James P., Jr.

    2010-02-01

    Head Mounted Displays (HMDs) have been utilized by the military for various applications since the 1980's. In the 1990's, this technology migrated to the consumer market. Most of these early systems suffered the major drawback that they were "look-at" versus "see through" systems, which prevented the user from seeing their environment. This reduced the utility of the devices and could potentially lead to safety issues. This presentation discusses the optical design of a novel see-through High Definition display device with a 40 degree field of view.

  8. Electromagnetic interference considerations for cockpit AMLCD displays

    Science.gov (United States)

    Case, Gary D.; Prache, Olivier

    1994-06-01

    OIS has developed various active matrix liquid crystal displays for the cockpits of several aircraft. Some of these displays have been tested for and are being designed for compliance with the military electromagnetic interference (EMI) requirements spelled out in MIL-STD- 461. Detailed analysis has also been performed on the addressed cell assembly and the flex circuitry to provide guidelines for EMI design. This paper presents the results of tests performed, steps which were taken to become EMI compliant and the results of the analysis.

  9. Some common regularities of synergistic effects display

    International Nuclear Information System (INIS)

    Our purpose here is to review and discuss some new general rules of synergistic effect display. The response of various biological objects to the simultaneous combined action of hyperthermia with ionizing radiation, ultraviolet light, ultrasound and some chemical agents was analysed using the experimental data obtained by authors. To check the universality of the regularities of synergistic effect display, the results published by others were also involved. The data presented strongly invoke the need to elaborate a new theoretical conception of the synergy which, being useful for environmental radiation protection, took into account the new regularities revealed. (author)

  10. Variable parallax barrier spacing in autostereoscopic displays

    Science.gov (United States)

    Yoon, Seon Kyu; Khym, Sungwon; Kim, Hyun-Woo; Kim, Sung-Kyu

    2016-07-01

    In general, multi-view autostereoscopic displays can only provide autostereoscopic images with little crosstalk at the optimum viewing distance (OVD) in the depth direction, limiting the mobility of viewers. Therefore, this paper proposes a method of increasing viewer mobility in the depth direction by varying the distance separating the parallax barrier and the display. Computer simulations and experiments were conducted to verify changes in the OVD resulting from the application of the proposed method. The results showed that the proposed method is effective at changing the OVD with respect to changes in the viewing distance. Therefore this method minimizes changes in the 3D image quality due to the viewer's depth location.

  11. Design for SOP AMOLED display panel

    Science.gov (United States)

    Ma, Hai-Ying; Xu, Bu-Heng; Wu, Chun-Ya; Meng, Zhi-Guo; Xiong, Shao-Zhen; Zhang, Li-Zhu

    2005-07-01

    A novel full color SOP (system on panel) AMOLED display based on the MIUC polycrystalline silicon TFT technique, and a new control circuit for the panel, which can deal with both VGA and DVI input signals have been developed. To realize gray-scale a sub-frame technique has been designed and implemented by FPGA device, in which an I2C module has been inserted. Through actual circuit, the whole design has been proven and the advantages of the SOP AMOLED display panel have been confirmed.

  12. Design for SOP AMOLED display panel

    Institute of Scientific and Technical Information of China (English)

    MA Hai-ying; XU Bu-heng; WU Chun-ya; MENG Zhi-guo; XIONG Shao-zhen; ZHANG Li-zhu

    2005-01-01

    A novel full color SOP(system on panel) AMOLED display based on the MIUC polycrystalline silicon TFT technique, and a new control circuit for the panel, which can deal with both VGA and DVI input signals have been developed.To realize gray-scale a sub-frame technique has been designed and implemented by FPGA device,in which an I2C module has been inserted.Through actual circuit,the whole design has been proven and the advantages of the SOP AMOLED display panel have been confirmed.

  13. Fundamental Studies of Recombinant Hydrogenases

    Energy Technology Data Exchange (ETDEWEB)

    Adams, Michael W

    2014-01-25

    This research addressed the long term goals of understanding the assembly and organization of hydrogenase enzymes, of reducing them in size and complexity, of determining structure/function relationships, including energy conservation via charge separation across membranes, and in screening for novel H2 catalysts. A key overall goal of the proposed research was to define and characterize minimal hydrogenases that are produced in high yields and are oxygen-resistant. Remarkably, in spite of decades of research carried out on hydrogenases, it is not possible to readily manipulate or design the enzyme using molecular biology approaches since a recombinant form produced in a suitable host is not available. Such resources are essential if we are to understand what constitutes a “minimal” hydrogenase and design such catalysts with certain properties, such as resistance to oxygen, extreme stability and specificity for a given electron donor. The model system for our studies is Pyrococcus furiosus, a hyperthermophile that grows optimally at 100°C, which contains three different nickel-iron [NiFe-] containing hydrogenases. Hydrogenases I and II are cytoplasmic while the other, MBH, is an integral membrane protein that functions to both evolve H2 and pump protons. Three important breakthroughs were made during the funding period with P. furiosus soluble hydrogenase I (SHI). First, we produced an active recombinant form of SHI in E. coli by the co-expression of sixteen genes using anaerobically-induced promoters. Second, we genetically-engineered P. furiosus to overexpress SHI by an order of magnitude compared to the wild type strain. Third, we generated the first ‘minimal’ form of SHI, one that contained two rather than four subunits. This dimeric form was stable and active, and directly interacted with a pyruvate-oxidizing enzyme with any intermediate electron carrier. The research resulted in five peer-reviewed publications.

  14. Cell biology of homologous recombination in yeast

    DEFF Research Database (Denmark)

    Eckert-Boulet, Nadine Valerie; Rothstein, Rodney; Lisby, Michael

    2011-01-01

    Homologous recombination is an important pathway for error-free repair of DNA lesions, such as single- and double-strand breaks, and for rescue of collapsed replication forks. Here, we describe protocols for live cell imaging of single-lesion recombination events in the yeast Saccharomyces...

  15. Recombinant organisms for production of industrial products

    OpenAIRE

    Adrio, Jose-Luis; Demain, Arnold L.

    2009-01-01

    A revolution in industrial microbiology was sparked by the discoveries of ther double-stranded structure of DNA and the development of recombinant DNA technology. Traditional industrial microbiology was merged with molecular biology to yield improved recombinant processes for the industrial production of primary and secondary metabolites, protein biopharmaceuticals and industrial enzymes. Novel genetic techniques such as metabolic engineering, combinatorial biosynthesis and molecular breeding...

  16. Theoretic Study of CⅡ Recombination Line

    Institute of Scientific and Technical Information of China (English)

    彭永伦; 王民盛; 韩小英; 李家明

    2004-01-01

    Using the R-matrix method, we carry out theoretical calculations for recombination line λ 8794 A(3d'-3p') of CⅡ, which is important to estimate the abundances of carbon in planetary nebulae. Our calculations are based on three sets of target orbital basis, through which we elucidate the electron correlation and static polarization effects in the dielectronic recombination processes.

  17. Recombinant Vaccinia Virus: Immunization against Multiple Pathogens

    Science.gov (United States)

    Perkus, Marion E.; Piccini, Antonia; Lipinskas, Bernard R.; Paoletti, Enzo

    1985-09-01

    The coding sequences for the hepatitis B virus surface antigen, the herpes simplex virus glycoprotein D, and the influenza virus hemagglutinin were inserted into a single vaccinia virus genome. Rabbits inoculated intravenously or intradermally with this polyvalent vaccinia virus recombinant produced antibodies reactive to all three authentic foreign antigens. In addition, the feasibility of multiple rounds of vaccination with recombinant vaccinia virus was demonstrated.

  18. Electron-ion recombination at low energy

    International Nuclear Information System (INIS)

    The work is based on results obtained with a merged-beams experiment. A beam of electronics with a well characterized density and energy distribution was merged with a fast, monoenergetic ion beam. Results have been obtained for radiative recombination and dielectronic recombination at low relative energies (0 to ∼70eV). The obtained energy resolution was improved by about a factor of 30. High vacuum technology was used to suppress interactions with electrons from the environments. The velocity distribution of the electron beam was determined. State-selective dielectronic-recombination measurements were performable. Recombination processes were studied. The theoretical background for radiative recombination and Kramers' theory are reviewed. The quantum mechanical result and its relation to the semiclassical theory is discussed. Radiative recombination was also measured with several different non-bare ions, and the applicability of the semiclassical theory to non-bare ions was investigated. The use of an effective charge is discussed. For dielectronic recombination, the standard theoretical approach in the isolated resonance and independent-processes approximation is debated. The applicability of this method was tested. The theory was able to reproduce most of the experimental data except when the recombination process was sensitive to couplings between different electronic configurations. The influence of external perturbing electrostatic fields is discussed. (AB) (31 refs.)

  19. Recombinant Swinepox Virus for Veterinary Vaccine Development.

    Science.gov (United States)

    Fan, Hong-Jie; Lin, Hui-Xing

    2016-01-01

    Poxvirus-vectors have been widely used in vaccine development for several important human and animal diseases; some of these vaccines have been licensed and used extensively. Swinepox virus (SPV) is well suited to develop recombinant vaccines because of its large packaging capacity for recombinant DNA, its host range specificity, and its ability to induce appropriate immune responses. PMID:26458836

  20. Cdk1 targets Srs2 to complete synthesis-dependent strand annealing and to promote recombinational repair.

    Directory of Open Access Journals (Sweden)

    Marco Saponaro

    2010-02-01

    Full Text Available Cdk1 kinase phosphorylates budding yeast Srs2, a member of UvrD protein family, displays both DNA translocation and DNA unwinding activities in vitro. Srs2 prevents homologous recombination by dismantling Rad51 filaments and is also required for double-strand break (DSB repair. Here we examine the biological significance of Cdk1-dependent phosphorylation of Srs2, using mutants that constitutively express the phosphorylated or unphosphorylated protein isoforms. We found that Cdk1 targets Srs2 to repair DSB and, in particular, to complete synthesis-dependent strand annealing, likely controlling the disassembly of a D-loop intermediate. Cdk1-dependent phosphorylation controls turnover of Srs2 at the invading strand; and, in absence of this modification, the turnover of Rad51 is not affected. Further analysis of the recombination phenotypes of the srs2 phospho-mutants showed that Srs2 phosphorylation is not required for the removal of toxic Rad51 nucleofilaments, although it is essential for cell survival, when DNA breaks are channeled into homologous recombinational repair. Cdk1-targeted Srs2 displays a PCNA-independent role and appears to have an attenuated ability to inhibit recombination. Finally, the recombination defects of unphosphorylatable Srs2 are primarily due to unscheduled accumulation of the Srs2 protein in a sumoylated form. Thus, the Srs2 anti-recombination function in removing toxic Rad51 filaments is genetically separable from its role in promoting recombinational repair, which depends exclusively on Cdk1-dependent phosphorylation. We suggest that Cdk1 kinase counteracts unscheduled sumoylation of Srs2 and targets Srs2 to dismantle specific DNA structures, such as the D-loops, in a helicase-dependent manner during homologous recombinational repair.

  1. Cdk1 targets Srs2 to complete synthesis-dependent strand annealing and to promote recombinational repair.

    Science.gov (United States)

    Saponaro, Marco; Callahan, Devon; Zheng, Xiuzhong; Krejci, Lumir; Haber, James E; Klein, Hannah L; Liberi, Giordano

    2010-02-01

    Cdk1 kinase phosphorylates budding yeast Srs2, a member of UvrD protein family, displays both DNA translocation and DNA unwinding activities in vitro. Srs2 prevents homologous recombination by dismantling Rad51 filaments and is also required for double-strand break (DSB) repair. Here we examine the biological significance of Cdk1-dependent phosphorylation of Srs2, using mutants that constitutively express the phosphorylated or unphosphorylated protein isoforms. We found that Cdk1 targets Srs2 to repair DSB and, in particular, to complete synthesis-dependent strand annealing, likely controlling the disassembly of a D-loop intermediate. Cdk1-dependent phosphorylation controls turnover of Srs2 at the invading strand; and, in absence of this modification, the turnover of Rad51 is not affected. Further analysis of the recombination phenotypes of the srs2 phospho-mutants showed that Srs2 phosphorylation is not required for the removal of toxic Rad51 nucleofilaments, although it is essential for cell survival, when DNA breaks are channeled into homologous recombinational repair. Cdk1-targeted Srs2 displays a PCNA-independent role and appears to have an attenuated ability to inhibit recombination. Finally, the recombination defects of unphosphorylatable Srs2 are primarily due to unscheduled accumulation of the Srs2 protein in a sumoylated form. Thus, the Srs2 anti-recombination function in removing toxic Rad51 filaments is genetically separable from its role in promoting recombinational repair, which depends exclusively on Cdk1-dependent phosphorylation. We suggest that Cdk1 kinase counteracts unscheduled sumoylation of Srs2 and targets Srs2 to dismantle specific DNA structures, such as the D-loops, in a helicase-dependent manner during homologous recombinational repair. PMID:20195513

  2. Molecular requirements for radiation-activated recombination

    International Nuclear Information System (INIS)

    Purpose/Objective: The major stumbling block to successful gene therapy today is poor gene transfer. We hypothesized that ionizing radiation might activate cellular recombination, and so improve stable gene transfer. We further hypothesized that known DNA-damage-repair proteins might also be important in radiation-activated recombination. Materials and Methods: The effect of irradiation on stable gene transfer efficiency was determined in human (A549 and 39F) and rodent (NIH/3T3) cell lines. Continuous low dose rate and multiple radiation fractions were also tested. Nuclear extracts were made and the effect of irradiation on inter-plasmid recombination/ligation determined. Multiple DNA damage-repair deficient cell lines were tested for radiation-activated recombination. Results: A significant radiation dose-dependent improvement in stable plasmid transfection (by as much as 1300 fold) is demonstrated in neoplastic and primary cells. An improvement in transient plasmid transfection is also seen, with as much as 85% of cells transiently expressing b-galactosidase (20-50 fold improvement). Stable transfection is only improved for linearized or nicked plasmids. Cells have improved gene transfer for at least 96 hours after irradiation. Both fractionated and continuous low dose rate irradiation are effective at improving stable gene transfer in mammalian cells, thus making relatively high radiation dose delivery clinically feasible. Inter-plasmid recombination is radiation dose dependent in nuclear extract assays, and the type of overhang (3', 5' or blunt end) significantly affects recombination efficiency and the type of product. The most common end-joining activity involves filling-in of the overhang followed by blunt end ligation. Adenovirus is a linear, double stranded DNA virus. We demonstrate that adenoviral infection efficiency is increased by irradiation. The duration of transgene expression is lengthened because the virus integrates with high efficiency (∼10

  3. V(D)J recombination deficiencies.

    Science.gov (United States)

    de Villartay, Jean-Pierre

    2009-01-01

    V(D)J recombination not only comprises the molecular mechanism that insures diversity of the immune system but also constitutes a critical checkpoint in the developmental program of B- and T-lymphocytes. The analysis of human patients with Severe Combined Immune Deficiency (SCID) has contributed to the understanding of the biochemistry of the V(D)J recombination reaction. The molecular study V(D)J recombination settings in humans, mice and in cellular mutants has allowed to unravel the process of Non Homologous End Joining (NHEJ), one of the key pathway that insure proper repair of DNA double strand breaks (dsb), whether they occur during V(D)J recombination or secondary to other DNA injuries. Two NHEJ factors, Artemis and Cernunnos, were indeed discovered through the study of human V(D)J recombination defective human SCID patients. PMID:19731800

  4. Stress analysis of passive hydrogen autocatalytic recombiner

    International Nuclear Information System (INIS)

    Background: Passive hydrogen autocatalytic recombiner is a device for eliminating hydrogen in the containment of the nuclear power plant when severe accident occurs, avoiding hydrogen explosion. After the Fukushima nuclear accident, the nuclear power plants pay more attention to the role of Passive hydrogen autocatalytic recombiner. Purpose: This paper studies the stresses of passive hydrogen autocatalytic recombiner under the seismic and LOCA conditions, Methods: Modeling by using the finite element software ANSYS, the impacts of airflow load under the LOCA conditions are considered reasonably and the strength of passive hydrogen autocatalytic recombiner is also evaluated according RCC-M, Results: The results show that the model can meet the requirement of the standard document. Conclusions: This paper will provide technical support for stress analysis and evaluation of passive hydrogen autocatalytic recombiner. (authors)

  5. Containment air circulation for optimal hydrogen recombination

    International Nuclear Information System (INIS)

    An accepted first-line defense for hydrogen mitigation is to design for the hydrogen to be rapidly mixed with the containment atmosphere and diluted to below flammability concentrations. Then, as hydrogen continues to be produced in the longer term, recombiners can be used to remove hydrogen: recombiners can be located in forced-air ducts or passive recombiners can be distributed within containment and the heat of recombination used to promote local air circulation. However, this principle does not eliminate the possibility of high hydrogen concentrations at locations removed from the recombiners. An improvement on this strategy is to arrange for a specific, buoyancy-driven, overall circulation of the containment atmosphere such that the recombiners can be located within the recirculation flow, immediately downstream of the hydrogen source. This would make the mixing process more predictable and solve the mass-transfer problem associated with distributed recombiners. Ideally, the recombiners would be located just above the hydrogen source so that the heat of recombination would assist the overall circulation. In this way, the hydrogen would be removed as close as possible to the source, thereby minimizing the amount of hydrogen immediately downstream of the source and reducing the hydrogen concentration to acceptable levels at other locations. Such a strategy requires the containment volume to be divided into an upflow path, past the hydrogen source and the recombiner, and a downflow path to complete the circuit. The flow could be generated actively using fans or passively using buoyancy forces arising from the difference in density of gases in the upfiow and downflow paths; the gases in the downflow path being cooled at an elevated heat sink. (author)

  6. Computer based human-centered display system

    Science.gov (United States)

    Still, David L. (Inventor); Temme, Leonard A. (Inventor)

    2002-01-01

    A human centered informational display is disclosed that can be used with vehicles (e.g. aircraft) and in other operational environments where rapid human centered comprehension of an operational environment is required. The informational display integrates all cockpit information into a single display in such a way that the pilot can clearly understand with a glance, his or her spatial orientation, flight performance, engine status and power management issues, radio aids, and the location of other air traffic, runways, weather, and terrain features. With OZ the information is presented as an integrated whole, the pilot instantaneously recognizes flight path deviations, and is instinctively drawn to the corrective maneuvers. Our laboratory studies indicate that OZ transfers to the pilot all of the integrated display information in less than 200 milliseconds. The reacquisition of scan can be accomplished just as quickly. Thus, the time constants for forming a mental model are near instantaneous. The pilot's ability to keep up with rapidly changing and threatening environments is tremendously enhanced. OZ is most easily compatible with aircraft that has flight path information coded electronically. With the correct sensors (which are currently available) OZ can be installed in essentially all current aircraft.

  7. Video memory compression for multiview autostereoscopic displays

    Science.gov (United States)

    Kaufmann, Benoit; Akil, Mohamed

    2004-05-01

    Nowadays, virtual 3D imaging is very commonly used in various domains, i.e. medical imaging or virtual reality. So far these 3D objects are projected to be displayed on 2D visualization systems (i.e. computer monitor or printed paper sheet), by the application itself, a graphic library or a specific hardware. Now, new displaying systems that allow computers to display 3D objects in real 3D appear, often based on the stereo-vision principle, which ultimate evolution is the multi-view autostereoscopic system, that displays different images at the same time, visible from different positions by different observers. When the number of images grows and these different images are directly stored, the needed memory becomes very large. This article proposes an algorithm for coding multi-view stereograms with very low quality loss and very fast and simple decoding that allows to calculate all the stereoscopic images with a low need of memory. This algorithm projects the objects on the screen but stores the associated depth of each one. Some of the background voxels are not erased by foreground voxels even if they are projected at the same point of the screen. All those voxels are sorted in a way that fasten the decoding which is reduced only to few memory copies.

  8. Linear integrator with a digital display

    International Nuclear Information System (INIS)

    The construction and performance of a linear integrator with a digital display is presented. A set of the CAMAC instrumentation for automatic measurement of a standard deviation is described. Programs for automatic data collection and for calculations of a relative standard deviation are given. (author)

  9. The staging system: Display and edit module

    Science.gov (United States)

    Edwards, E.; Bernier, L.

    1976-01-01

    The Display and Edit (D and E) Module described is one of six major modules being developed for the STAGING (STructural Analysis through Generalized INteractive Graphics) System. Several remarks are included concerning the computer environment and the architecture of the data base. The utility of this module is emphasized.

  10. FELIX: a volumetric 3D laser display

    Science.gov (United States)

    Bahr, Detlef; Langhans, Knut; Gerken, Martin; Vogt, Carsten; Bezecny, Daniel; Homann, Dennis

    1996-03-01

    In this paper, an innovative approach of a true 3D image presentation in a space filling, volumetric laser display will be described. The introduced prototype system is based on a moving target screen that sweeps the display volume. Net result is the optical equivalent of a 3D array of image points illuminated to form a model of the object which occupies a physical space. Wireframe graphics are presented within the display volume which a group of people can walk around and examine simultaneously from nearly any orientation and without any visual aids. Further to the detailed vector scanning mode, a raster scanned system and a combination of both techniques are under development. The volumetric 3D laser display technology for true reproduction of spatial images can tremendously improve the viewers ability to interpret data and to reliably determine distance, shape and orientation. Possible applications for this development range from air traffic control, where moving blips of light represent individual aircrafts in a true to scale projected airspace of an airport, to various medical applications (e.g. electrocardiography, computer-tomography), to entertainment and education visualization as well as imaging in the field of engineering and Computer Aided Design.

  11. Ambient Displays and Game Design Patterns

    NARCIS (Netherlands)

    Kelle, Sebastian; Börner, Dirk; Kalz, Marco; Specht, Marcus

    2010-01-01

    Kelle, S., Börner, D., Kalz, M., & Specht, M. (2010). Ambient Displays and Game Design Patterns. In M. Wolpers, P. A. Kirschner, M. Scheffel, S. Lindstädt, & V. Dimitrova (Eds.), Sustaining TEL: From Innovation to Learning and Practice, Proceedings of EC-TEL 2010 (pp. 512-517). LNCS 6383. Berlin, He

  12. High performance visual display for HENP detectors

    International Nuclear Information System (INIS)

    A high end visual display for High Energy Nuclear Physics (HENP) detectors is necessary because of the sheer size and complexity of the detector. For BNL this display will be of special interest because of STAR and ATLAS. To load, rotate, query, and debug simulation code with a modern detector simply takes too long even on a powerful work station. To visualize the HENP detectors with maximal performance we have developed software with the following characteristics. We develop a visual display of HENP detectors on BNL multiprocessor visualization server at multiple level of detail. We work with general and generic detector framework consistent with ROOT, GAUDI etc, to avoid conflicting with the many graphic development groups associated with specific detectors like STAR and ATLAS. We develop advanced OpenGL features such as transparency and polarized stereoscopy. We enable collaborative viewing of detector and events by directly running the analysis in BNL stereoscopic theatre. We construct enhanced interactive control, including the ability to slice, search and mark areas of the detector. We incorporate the ability to make a high quality still image of a view of the detector and the ability to generate animations and a fly through of the detector and output these to MPEG or VRML models. We develop data compression hardware and software so that remote interactive visualization will be possible among dispersed collaborators. We obtain real time visual display for events accumulated during simulations

  13. Converting a Display Screen into a Touchscreen

    Institute of Scientific and Technical Information of China (English)

    Qun Wang; Jun Cheng; San-Ming Shen; Yi-Jiang Shen; Jian-Xin Pang

    2014-01-01

    A method is presented to convert any display screen into a touchscreen by using a pair of cameras. Most state of art touchscreens make use of special touch-sensitive hardware or depend on infrared sensors in various configurations. We describe a novel computer-vision-based method that can robustly identify fingertips and detect touch with a precision of a few millimeters above the screen. In our system, the two cameras capture the display screen image simultaneously. Users can interact with a computer by the fingertip on the display screen. We have two important contributions:first, we develop a simple and robust hand detection method based on predicted images. Second, we determine whether a physical touch takes places by the homography of the two cameras. In this system, the appearance of the display screen in camera images is inherently predictable from the computer output images. Therefore, we can compute the predicted images and extract human hand precisely by simply subtracting the predicted images from captured images.

  14. Market trends in the projection display industry

    Science.gov (United States)

    Dash, Sweta

    2000-04-01

    The projection display industry represents a multibillion- dollar market that includes four distinct technologies. High-volume consumer products and high-value business products drive the market, with different technologies being used in different application markets. The consumer market is dominated by rear CRT technology, especially in the projection television segment. But rear LCD (liquid crystal display) and rear reflective (DLP, or Digital Light ProcessingTM) televisions are slowly emerging as future competitors to rear CRT projectors. Front CRT projectors are still popular in the high-end home theater market. Front LCD technology and front DLP technology dominate the business market. Traditional light valve technology was the only solution for applications requiring high light outputs, but new three-chip DLP projectors meet the higher light output requirements at a lower price. In the last few years the strongest growth has been in the business market for multimedia presentation applications. This growth was due to the continued increase in display pixel formats, the continued reduction in projector weight, and the improved price/performance ratio. The projection display market will grow at a significant rate during the next five years, driven by the growth in ultraportable (market to digital and HDTV products.

  15. Image display device in digital TV

    Science.gov (United States)

    Choi, Seung Jong

    2006-07-18

    Disclosed is an image display device in a digital TV that is capable of carrying out the conversion into various kinds of resolution by using single bit map data in the digital TV. The image display device includes: a data processing part for executing bit map conversion, compression, restoration and format-conversion for text data; a memory for storing the bit map data obtained according to the bit map conversion and compression in the data processing part and image data inputted from an arbitrary receiving part, the receiving part receiving one of digital image data and analog image data; an image outputting part for reading the image data from the memory; and a display processing part for mixing the image data read from the image outputting part and the bit map data converted in format from the a data processing part. Therefore, the image display device according to the present invention can convert text data in such a manner as to correspond with various resolution, carry out the compression for bit map data, thereby reducing the memory space, and support text data of an HTML format, thereby providing the image with the text data of various shapes.

  16. Advanced manufacturing technologies on color plasma displays

    Science.gov (United States)

    Betsui, Keiichi

    2000-06-01

    The mass production of the color plasma display started from 1996. However, since the price of the panel is still expensive, PDPs are not in widespread use at home. It is necessary to develop the new and low-cost manufacturing technologies to reduce the price of the panel. This paper describes some of the features of new fabrication technologies of PDPs.

  17. Ambient Displays and Game Design Patterns

    OpenAIRE

    Kelle, Sebastian; Börner, Dirk; KALZ Marco; Specht, Marcus

    2010-01-01

    Kelle, S., Börner, D., Kalz, M., & Specht, M. (2010). Ambient Displays and Game Design Patterns. In M. Wolpers, P. A. Kirschner, M. Scheffel, S. Lindstädt, & V. Dimitrova (Eds.), Sustaining TEL: From Innovation to Learning and Practice, Proceedings of EC-TEL 2010 (pp. 512-517). LNCS 6383. Berlin, Heidelberg, & New York: Springer.

  18. Exploring Community Building with an Awareness Display

    NARCIS (Netherlands)

    Vyas, Dhaval; Nijholt, Anton; Eliëns, Anton; Poelman, Wim; Makedon, Fillia

    2011-01-01

    In this paper, we present a field trial of a pervasive system called Panorama that is aimed at supporting social awareness in work environments. Panorama is an intelligent situated display in the staff room of an academic department. It artistically represents non-critical user generated content suc

  19. Liquid Crystal Microlenses for Autostereoscopic Displays

    Directory of Open Access Journals (Sweden)

    José Francisco Algorri

    2016-01-01

    Full Text Available Three-dimensional vision has acquired great importance in the audiovisual industry in the past ten years. Despite this, the first generation of autostereoscopic displays failed to generate enough consumer excitement. Some reasons are little 3D content and performance issues. For this reason, an exponential increase in three-dimensional vision research has occurred in the last few years. In this review, a study of the historical impact of the most important technologies has been performed. This study is carried out in terms of research manuscripts per year. The results reveal that research on spatial multiplexing technique is increasing considerably and today is the most studied. For this reason, the state of the art of this technique is presented. The use of microlenses seems to be the most successful method to obtain autostereoscopic vision. When they are fabricated with liquid crystal materials, extended capabilities are produced. Among the numerous techniques for manufacturing liquid crystal microlenses, this review covers the most viable designs for its use in autostereoscopic displays. For this reason, some of the most important topologies and their relation with autostereoscopic displays are presented. Finally, the challenges in some recent applications, such as portable devices, and the future of three-dimensional displays based on liquid crystal microlenses are outlined.

  20. Creating Gaze Annotations in Head Mounted Displays

    DEFF Research Database (Denmark)

    Mardanbeigi, Diako; Qvarfordt, Pernilla

    To facilitate distributed communication in mobile settings, we developed GazeNote for creating and sharing gaze annotations in head mounted displays (HMDs). With gaze annotations it possible to point out objects of interest within an image and add a verbal description. To create an annota- tion, ...

  1. Amorphous Silicon: Flexible Backplane and Display Application

    Science.gov (United States)

    Sarma, Kalluri R.

    Advances in the science and technology of hydrogenated amorphous silicon (a-Si:H, also referred to as a-Si) and the associated devices including thin-film transistors (TFT) during the past three decades have had a profound impact on the development and commercialization of major applications such as thin-film solar cells, digital image scanners and X-ray imagers and active matrix liquid crystal displays (AMLCDs). Particularly, during approximately the past 15 years, a-Si TFT-based flat panel AMLCDs have been a huge commercial success. a-Si TFT-LCD has enabled the note book PCs, and is now rapidly replacing the venerable CRT in the desktop monitor and home TV applications. a-Si TFT-LCD is now the dominant technology in use for applications ranging from small displays such as in mobile phones to large displays such as in home TV, as well-specialized applications such as industrial and avionics displays.

  2. A structurally informed autotransporter platform for efficient heterologous protein secretion and display

    Directory of Open Access Journals (Sweden)

    Jong Wouter SP

    2012-06-01

    Full Text Available Abstract Background The self-sufficient autotransporter (AT pathway, ubiquitous in Gram-negative bacteria, combines a relatively simple protein secretion mechanism with a high transport capacity. ATs consist of a secreted passenger domain and a β-domain that facilitates transfer of the passenger across the cell-envelope. They have a great potential for the extracellular expression of recombinant proteins but their exploitation has suffered from the limited structural knowledge of carrier ATs. Capitalizing on its crystal structure, we have engineered the Escherichia coli AT Hemoglobin protease (Hbp into a platform for the secretion and surface display of heterologous proteins, using the Mycobacterium tuberculosis vaccine target ESAT6 as a model protein. Results Based on the Hbp crystal structure, five passenger side domains were selected and one by one replaced by ESAT6, whereas a β-helical core structure (β-stem was left intact. The resulting Hbp-ESAT6 chimeras were efficiently and stably secreted into the culture medium of E. coli. On the other hand, Hbp-ESAT6 fusions containing a truncated β-stem appeared unstable after translocation, demonstrating the importance of an intact β-stem. By interrupting the cleavage site between passenger and β-domain, Hbp-ESAT6 display variants were constructed that remain cell associated and facilitate efficient surface exposure of ESAT6 as judged by proteinase K accessibility and whole cell immuno-EM analysis. Upon replacement of the passenger side domain of an alternative AT, EspC, ESAT6 was also efficiently secreted, showing the approach is more generally applicable to ATs. Furthermore, Hbp-ESAT6 was efficiently displayed in an attenuated Salmonella typhimurium strain upon chromosomal integration of a single encoding gene copy, demonstrating the potential of the Hbp platform for live vaccine development. Conclusions We developed the first structurally informed AT platform for efficient secretion and

  3. Reflective and transflective liquid crystal displays

    Science.gov (United States)

    Zhou, Fushan

    Recently transflective liquid crystal displays (LCD) received a lot of attention. A transflective display has a transmissive mode and a reflective mode. It combines the high contrast, high brightness of the transmissive mode with energy-saving of reflective mode and has good performance in various illumination conditions. However, state-of-the-art transflective displays have problems such as different electro-optical properties, difficulty in compatibility and optimization of both modes, low efficiency of light utilization, and complexity in structure. This dissertation focuses on finding new designs of transflective displays that address those problems. One way to do this is to study film compensation of LCD. We first studied film compensation of bistable twisted nematic (BTN) LCD. Starting form the reduced (3x3) Mueller matrices, we derived and simplified the conditions that film compensated BTN can be optimized. Based on these relations, electro-optical properties of some particular configurations, and designs of transflective BTN with high brightness and contrast were given. To confirm and get a better understanding of the results, we use the Poincare sphere to analyze film compensated BTN. The key to this approach is the existence of "fixed points". Compared with the matrix approach, this approach is more simple, elegant, and efficient. We then generalized the Poincare sphere approach to a universal approach of LCD. We applied the universal approach to film compensation of ECB and IPS, and the design of achromatic birefringent filters. We also give two more new designs of transflective displays. In the first design, a dichroic mirror is used to split the visible spectrum into two parts used in transmissive and reflective modes, respectively. Both modes can be optimized. It has a simple structure and good light utilization. A design for a full-color transflective display with good performance is also given. In the second design, each pixel is divided into two

  4. Advanced Three-Dimensional Display System

    Science.gov (United States)

    Geng, Jason

    2005-01-01

    A desktop-scale, computer-controlled display system, initially developed for NASA and now known as the VolumeViewer(TradeMark), generates three-dimensional (3D) images of 3D objects in a display volume. This system differs fundamentally from stereoscopic and holographic display systems: The images generated by this system are truly 3D in that they can be viewed from almost any angle, without the aid of special eyeglasses. It is possible to walk around the system while gazing at its display volume to see a displayed object from a changing perspective, and multiple observers standing at different positions around the display can view the object simultaneously from their individual perspectives, as though the displayed object were a real 3D object. At the time of writing this article, only partial information on the design and principle of operation of the system was available. It is known that the system includes a high-speed, silicon-backplane, ferroelectric-liquid-crystal spatial light modulator (SLM), multiple high-power lasers for projecting images in multiple colors, a rotating helix that serves as a moving screen for displaying voxels [volume cells or volume elements, in analogy to pixels (picture cells or picture elements) in two-dimensional (2D) images], and a host computer. The rotating helix and its motor drive are the only moving parts. Under control by the host computer, a stream of 2D image patterns is generated on the SLM and projected through optics onto the surface of the rotating helix. The system utilizes a parallel pixel/voxel-addressing scheme: All the pixels of the 2D pattern on the SLM are addressed simultaneously by laser beams. This parallel addressing scheme overcomes the difficulty of achieving both high resolution and a high frame rate in a raster scanning or serial addressing scheme. It has been reported that the structure of the system is simple and easy to build, that the optical design and alignment are not difficult, and that the

  5. VLSI design of 3D display processing chip for binocular stereo displays

    Institute of Scientific and Technical Information of China (English)

    Ge Chenyang; Zheng Nanning

    2010-01-01

    In order to develop the core chip supporting binocular stereo displays for head mounted display(HMD)and glasses-TV,a very large scale integrated(VLSI)design scheme is proposed by using a pipeline architecture for 3D display processing chip(HMD100).Some key techniques including stereo display processing and high precision video scaling based bicubic interpolation,and their hardware implementations which improve the image quality are presented.The proposed HMD100 chip is verified by the field-programmable gate array(FPGA).As one of innovative and high integration SoC chips,HMD100 is designed by a digital and analog mixed circuit.It can support binocular stereo display,has better scaling effect and integration.Hence it is applicable in virtual reality(VR),3D games and other microdisplay domains.

  6. Dynamic exit pupil trackers for autostereoscopic displays.

    Science.gov (United States)

    Akşit, Kaan; Baghsiahi, Hadi; Surman, Phil; Ölçer, Selim; Willman, Eero; Selviah, David R; Day, Sally; Urey, Hakan

    2013-06-17

    This paper describes the first demonstrations of two dynamic exit pupil (DEP) tracker techniques for autostereoscopic displays. The first DEP tracker forms an exit pupil pair for a single viewer in a defined space with low intraocular crosstalk using a pair of moving shutter glasses located within the optical system. A display prototype using the first DEP tracker is constructed from a pair of laser projectors, pupil-forming optics, moving shutter glasses at an intermediate pupil plane, an image relay lens, and a Gabor superlens based viewing screen. The left and right eye images are presented time-sequentially to a single viewer and seen as a 3D image without wearing glasses and allows the viewer to move within a region of 40 cm × 20 cm in the lateral plane, and 30 cm along the axial axis. The second DEP optics can move the exit pupil location dynamically in a much larger 3D space by using a custom spatial light modulator (SLM) forming an array of shutters. Simultaneous control of multiple exit pupils in both lateral and axial axes is demonstrated for the first time and provides a viewing volume with an axial extent of 0.6-3 m from the screen and within a lateral viewing angle of ± 20° for multiple viewers. This system has acceptable crosstalk (< 5%) between the stereo image pairs. In this novel version of the display the optical system is used as an advanced dynamic backlight for a liquid crystal display (LCD). This has advantages in terms of overall display size as there is no requirement for an intermediate image, and in image quality. This system has acceptable crosstalk (< 5%) between the stereo image pairs. PMID:23787621

  7. In Vitro Selection of Fab Fragments by mRNA Display and Gene-Linking Emulsion PCR

    Directory of Open Access Journals (Sweden)

    Takeshi Sumida

    2012-01-01

    Full Text Available In vitro selection by display methods has been an effective tool for engineering recombinant antibodies. mRNA display based on a cell-free translation system has the advantages of larger library sizes and quicker selection procedures compared with cell-based display methods such as phage display. However, mRNA display has been limited to select single-chain polypeptides such as scFvs due to its characteristic of linking a nascent polypeptide with its encoding mRNA on the ribosome. Here we demonstrated a new way of selecting heterodimeric Fab fragments by using mRNA display combined with emulsion PCR. We designed a pair of complementary 5′ UTR sequences that can link the Fab heavy and light chain genes together by overlap-extension PCR in water-in-oil emulsions. We confirmed that two mRNA-displayed polypeptides for heavy and light chain of a model Fab fragment were associated into the active form and that a specific Fab fragment gene was enriched over 100-fold per round of a model affinity selection followed by the gene-linking emulsion PCR. We further performed directed evolution of Fab fragments with higher binding activity from a randomized Fab fragment library.

  8. Engineering the cell surface display of cohesins for assembly of cellulosome-inspired enzyme complexes on Lactococcus lactis

    Directory of Open Access Journals (Sweden)

    Wieczorek Andrew S

    2010-09-01

    Full Text Available Abstract Background The assembly and spatial organization of enzymes in naturally occurring multi-protein complexes is of paramount importance for the efficient degradation of complex polymers and biosynthesis of valuable products. The degradation of cellulose into fermentable sugars by Clostridium thermocellum is achieved by means of a multi-protein "cellulosome" complex. Assembled via dockerin-cohesin interactions, the cellulosome is associated with the cell surface during cellulose hydrolysis, forming ternary cellulose-enzyme-microbe complexes for enhanced activity and synergy. The assembly of recombinant cell surface displayed cellulosome-inspired complexes in surrogate microbes is highly desirable. The model organism Lactococcus lactis is of particular interest as it has been metabolically engineered to produce a variety of commodity chemicals including lactic acid and bioactive compounds, and can efficiently secrete an array of recombinant proteins and enzymes of varying sizes. Results Fragments of the scaffoldin protein CipA were functionally displayed on the cell surface of Lactococcus lactis. Scaffolds were engineered to contain a single cohesin module, two cohesin modules, one cohesin and a cellulose-binding module, or only a cellulose-binding module. Cell toxicity from over-expression of the proteins was circumvented by use of the nisA inducible promoter, and incorporation of the C-terminal anchor motif of the streptococcal M6 protein resulted in the successful surface-display of the scaffolds. The facilitated detection of successfully secreted scaffolds was achieved by fusion with the export-specific reporter staphylococcal nuclease (NucA. Scaffolds retained their ability to associate in vivo with an engineered hybrid reporter enzyme, E. coli β-glucuronidase fused to the type 1 dockerin motif of the cellulosomal enzyme CelS. Surface-anchored complexes exhibited dual enzyme activities (nuclease and β-glucuronidase, and were

  9. Baculovirus virions displaying Plasmodium berghei circumsporozoite protein protect mice against malaria sporozoite infection

    International Nuclear Information System (INIS)

    The display of foreign proteins on the surface of baculovirus virions has provided a tool for the analysis of protein-protein interactions and for cell-specific targeting in gene transfer applications. To evaluate the baculovirus display system as a vaccine vehicle, we have generated a recombinant baculovirus (AcNPV-CSPsurf) that displays rodent malaria Plasmodium berghei circumsporozoite protein (PbCSP) on the virion surface as a fusion protein with the major baculovirus envelope glycoprotein gp64. The PbCSP-gp64 fusion protein was incorporated and oligomerized on the virion surface and led to a 12-fold increase in the binding activity of AcNPV-CSPsurf virions to HepG2 cells. Immunization with adjuvant-free AcNPV-CSPsurf virions induced high levels of antibodies and gamma interferon-secreting cells against PbCSP and protected 60% of mice against sporozoite challenge. These data demonstrate that AcNPV-CSPsurf displays sporozoite-like PbCSP on the virion surface and possesses dual potentials as a malaria vaccine candidate and a liver-directed gene delivery vehicle

  10. Display of Peptides and Proteins on the Surface of Bacteriophage λ

    Science.gov (United States)

    Sternberg, Nat; Hoess, Ronald H.

    1995-02-01

    The display of peptides or proteins on the surface of viruses is an important technology for studying peptides or proteins and their interaction with other molecules. Here we describe a display vehicle based on bacteriophage λ that incorporates a number of features distinct from other currently used display systems. Fusions of peptides or protein domains have been made to the amino terminus of the 11-kDa D protein of the λ capsid. These fusions assemble onto the viral capsid and appear to be accessible to ligand interactions, based on the ability of a monoclonal antibody to recognize an epitope fused to the D protein on phage heads. To produce large D fusion display libraries and yet avoid the cumbersome task of cloning many fragments into λ DNA, we have used the Cre-loxP site-specific recombination system in vivo to incorporate plasmids encoding the D fusions into the phage genome. Finally, we show that D fusion proteins can be added in vitro to phage lacking D protein and be assembled onto the viral capsid.

  11. Recombination of cold electrons with cooled ions

    International Nuclear Information System (INIS)

    Recombination, one of the possible reactions of cold electrons with ions, has several important applications, besides being of fundamental interest. Astrophysical objects are studied through their radiation spectra emitted from electron-ion recombination. Plasma modeling and diagnostics are based on the knowledge of recombination cross sections. It is the proposed mechanism for anti-hydrogen production in a trap filled with antiprotons and positrons. The most fundamental process of recombination is radiative recombination (RR): Zq+ + e→ Z(q-1)+ + hν. Here, we discuss measurements of recombination rate coefficients in absolute scale between free electrons and ions at the electron cooler of the CRYRING storage ring at MSL, Stockholm. Surprisingly, there is a consistent disagreement between the measured rates and the rates obtained from theoretical descriptions of RR. It could be shown that this deviation depends on external fields, such as a weak magnetic field in the interaction region. Another effect presented is the enhancement by two orders of magnitude of the recombination rates into a certain quantum state of the atom in a strong laser field. We will discuss these results with respect to their implications for the formation of anti-hydrogen atoms in a Penning trap. (authors)

  12. Optimal Expression Condition of Recombinant RAP

    Institute of Scientific and Technical Information of China (English)

    ZHANG Jie; ZHANG Hong; BI Hao; LIU Zhiguo; GUO Jianli; QU Shen

    2007-01-01

    In order to construct the expression recombinant of human receptor associated protein (RAP), optimize its expression condition and obtain the recombinant protein after expression with high efficiency, two prokaryotic expression vectors-pT7-PL and pET-28a(+) were used to construct the expression recombinant containing RAP cDNA, and the expression efficiency of two kinds of expression E. coli of BL21 strains was compared. The effect of different induction conditions on the expression of recombinant RAP was observed. After recombinant protein was purified with Ni+-nitrilotriacetic acid (Ni+-NTA) affinity chromatogram, its binding ability with microphage was observed. The results showed that two recombinant plasmids both obtained high expression of RAP. The expression levels of RAP in plasmid pT7-PL-RAP in BL21 (DE3, plysS) strain were significantly higher than in BL21 (DE3) strain. The expression of pT7-PL-RAP in the presence of chloramphenicol was higher than in the absence of chloramphenicol, and most of the inducible expressed RAP was soluble. The RAP which was purified by Ni+-NTA resin could strongly bind with the RAW264.7 cells rich in low density lipoprotein receptor (LDLR) family receptors. It was concluded that the expression condition of recombinant RAP was optimized and functional RAP was obtained, which offered a good foundation for the further production of RAP as research tool.

  13. Super high precision 200 ppi liquid crystal display series; Chokoseido 200 ppi ekisho display series

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    In mobile equipment, in demand is a high precision liquid crystal display (LCD) having the power of expression equivalent to printed materials like magazines because of the necessity of displaying a large amount of information on a easily potable small screen. In addition, with the spread and high-quality image of digital still cameras, it is strongly desired to display photographed digital image data in high quality. Toshiba Corp., by low temperature polysilicone (p-Si) technology, commercialized the liquid crystal display series of 200 ppi (pixels per inch) precision dealing with the rise of the high-precision high-image quality LCD market. The super high precision of 200 ppi enables the display of smooth beautiful animation comparable to printed sheets of magazines and photographs. The display series are suitable for the display of various information services such as electronic books and electronic photo-viewers including internet. The screen sizes lined up are No. 4 type VGA (640x480 pixels) of a small pocket notebook size and No. 6.3 type XGA (1,024x768 pixels) of a paperback size, with a larger screen to be furthered. (translated by NEDO)

  14. Recombination every day: abundant recombination in a virus during a single multi-cellular host infection.

    Directory of Open Access Journals (Sweden)

    Remy Froissart

    2005-03-01

    Full Text Available Viral recombination can dramatically impact evolution and epidemiology. In viruses, the recombination rate depends on the frequency of genetic exchange between different viral genomes within an infected host cell and on the frequency at which such co-infections occur. While the recombination rate has been recently evaluated in experimentally co-infected cell cultures for several viruses, direct quantification at the most biologically significant level, that of a host infection, is still lacking. This study fills this gap using the cauliflower mosaic virus as a model. We distributed four neutral markers along the viral genome, and co-inoculated host plants with marker-containing and wild-type viruses. The frequency of recombinant genomes was evaluated 21 d post-inoculation. On average, over 50% of viral genomes recovered after a single host infection were recombinants, clearly indicating that recombination is very frequent in this virus. Estimates of the recombination rate show that all regions of the genome are equally affected by this process. Assuming that ten viral replication cycles occurred during our experiment-based on data on the timing of coat protein detection-the per base and replication cycle recombination rate was on the order of 2 x 10(-5 to 4 x 10(-5. This first determination of a virus recombination rate during a single multi-cellular host infection indicates that recombination is very frequent in the everyday life of this virus.

  15. Recombination in narrow-gapped semiconductors

    International Nuclear Information System (INIS)

    In narrow-gapped semiconductors of the type Hgsub(1-x)Cdsub(x)Te as well as in lead chalcogenides and their mixed crystals with energy gaps of some tenths of eV, the band-band recombination processes dominate if the samples are sufficiently perfect in their crystal lattices. The relative importance of the radiative or Auger recombination depends on the width of the energy gap and the charge carrier concentration. In the extreme case of very narrow energy gaps plasmon and one-electron recombination occurs additionally

  16. Tensor displays: compressive light field synthesis using multilayer displays with directional backlighting

    OpenAIRE

    Wetzstein, Gordon; Lanman, Douglas R.; Hirsch, Matthew Waggener; Raskar, Ramesh

    2012-01-01

    We introduce tensor displays: a family of compressive light field displays comprising all architectures employing a stack of time-multiplexed, light-attenuating layers illuminated by uniform or directional backlighting (i.e., any low-resolution light field emitter). We show that the light field emitted by an N-layer, M-frame tensor display can be represented by an Nth-order, rank-M tensor. Using this representation we introduce a unified optimization framework, based on nonnegative tensor fac...

  17. Gas Vesicle Nanoparticles for Antigen Display

    Directory of Open Access Journals (Sweden)

    Shiladitya DasSarma

    2015-09-01

    Full Text Available Microorganisms like the halophilic archaeon Halobacterium sp. NRC-1 produce gas-filled buoyant organelles, which are easily purified as protein nanoparticles (called gas vesicles or GVNPs. GVNPs are non-toxic, exceptionally stable, bioengineerable, and self-adjuvanting. A large gene cluster encoding more than a dozen proteins has been implicated in their biogenesis. One protein, GvpC, found on the exterior surface of the nanoparticles, can accommodate insertions near the C-terminal region and results in GVNPs displaying the inserted sequences on the surface of the nanoparticles. Here, we review the current state of knowledge on GVNP structure and biogenesis as well as available studies on immunogenicity of pathogenic viral, bacterial, and eukaryotic proteins and peptides displayed on the nanoparticles. Recent improvements in genetic tools for bioengineering of GVNPs are discussed, along with future opportunities and challenges for development of vaccines and other applications.

  18. Visual displays and Neuro-Linguistic Programming

    Energy Technology Data Exchange (ETDEWEB)

    Brown-VanHoozer, S.A. [Argonne National Lab., Idaho Falls, ID (United States); VanHoozer, W.R. [Tranceformations Unlimited, Rigby, ID (United States)

    1994-10-01

    Advancement of computer technology is forthcoming at such a rapid pace that the research concerning the interplay of humans and computer technology is lagging far behind. One area of particular concern is the design of visual displays that are pragmatic, ``user friendly,`` and ``user assisting.`` When engineers design visual displays, they generally do so methodically and logically, but only from within their own individual perspective or ``model of the world.`` They select the human aspects which make sense to them and not necessarily to non-engineers, operators, and others. The model design is what the engineer chooses to relate, based on his or her perspective of reality. These choices limit the model design thereby excluding the users` perspective. A set of techniques which can be used to assist the designers in expanding their choices and include the users` model is Neuro-Linguistic Programming (NLP).

  19. Time management displays for shuttle countdown

    Science.gov (United States)

    Beller, Arthur E.; Hadaller, H. Greg; Ricci, Mark J.

    1992-01-01

    The Intelligent Launch Decision Support System project is developing a Time Management System (TMS) for the NASA Test Director (NTD) to use for time management during Shuttle terminal countdown. TMS is being developed in three phases: an information phase; a tool phase; and an advisor phase. The information phase is an integrated display (TMID) of firing room clocks, of graphic timelines with Ground Launch Sequencer events, and of constraints. The tool phase is a what-if spreadsheet (TMWI) for devising plans for resuming from unplanned hold situations. It is tied to information in TMID, propagates constraints forward and backward to complete unspecified values, and checks the plan against constraints. The advisor phase is a situation advisor (TMSA), which proactively suggests tactics. A concept prototype for TMSA is under development. The TMID is currently undergoing field testing. Displays for TMID and TMWI are described. Descriptions include organization, rationale for organization, implementation choices and constraints, and use by NTD.

  20. Panoramic cockpit displays for tactical military cockpits

    Science.gov (United States)

    Fletcher, Mark; Huffman, David

    2010-04-01

    The F-35 Joint Strike Fighter (JSF) incorporates the latest technology for aerial warfighting. To support this aircraft's mission and to provide the pilot with the increased situational awareness needed in today's battlespace, a panoramic AMLCD was developed and is being deployed for the first time. This 20" by 8" display is the largest fielded to date in a tactical fighter. Key system innovations had to be employed to allow this technology to function in this demanding environment. Certain older generation aircraft are now considering incorporating a panoramic display to provide their crews with this level of increased capability. Key design issues that had to be overcome dealt with sunlight readability, vibration resistance, touchscreen operation, and reliability concerns to avoid single-point failures. A completely dual redundant system design had to be employed to ensure that the pilot would always have access to critical mission and flight data.

  1. Virtual displays for 360-degree video

    Science.gov (United States)

    Gilbert, Stephen; Boonsuk, Wutthigrai; Kelly, Jonathan W.

    2012-03-01

    In this paper we describe a novel approach for comparing users' spatial cognition when using different depictions of 360- degree video on a traditional 2D display. By using virtual cameras within a game engine and texture mapping of these camera feeds to an arbitrary shape, we were able to offer users a 360-degree interface composed of four 90-degree views, two 180-degree views, or one 360-degree view of the same interactive environment. An example experiment is described using these interfaces. This technique for creating alternative displays of wide-angle video facilitates the exploration of how compressed or fish-eye distortions affect spatial perception of the environment and can benefit the creation of interfaces for surveillance and remote system teleoperation.

  2. Parallel surface processing system for graphics display

    Energy Technology Data Exchange (ETDEWEB)

    Liang, B.C.

    1990-03-27

    This patent describes a method for generating surface information for a graphics object to be displayed on a graphics display system. It comprises: providing input control points from storage, the control points representing a surface to be processed by a transformation processor that further comprises floating point processors connected in parallel. The input control points including coordinate values and associated weights; processing in parallel, in the transformation processor, the input control points to incrementally generate a plurality of surface patches; performing geometric transform computations, in parallel, on the input control points to derive one transformed coordinate for each vertex of the surface patch from each one of the plurality of floating point processors making up the transformation processor; and providing the transformed coordinates to a next stage floating point processor for generating vectors normal to the surface patches at the vertices of the surface patches.

  3. Spacesuit Data Display and Management System

    Science.gov (United States)

    Hall, David G.; Sells, Aaron; Shah, Hemal

    2009-01-01

    A prototype embedded avionics system has been designed for the next generation of NASA extra-vehicular-activity (EVA) spacesuits. The system performs biomedical and other sensor monitoring, image capture, data display, and data transmission. An existing NASA Phase I and II award winning design for an embedded computing system (ZIN vMetrics - BioWATCH) has been modified. The unit has a reliable, compact form factor with flexible packaging options. These innovations are significant, because current state-of-the-art EVA spacesuits do not provide capability for data displays or embedded data acquisition and management. The Phase 1 effort achieved Technology Readiness Level 4 (high fidelity breadboard demonstration). The breadboard uses a commercial-grade field-programmable gate array (FPGA) with embedded processor core that can be upgraded to a space-rated device for future revisions.

  4. Interactive displays natural human-interface technologies

    CERN Document Server

    Bhowmik, Achintya K

    2014-01-01

    One of the first books to provide an in-depth discussion of the technologies, applications and trends in the rapidly emerging field of interactive displays (touch, gesture & voice) The book will cover the technologies, applications and trends in the field of interactive displays, namely interfaces based on touch, gesture and voice and those using a combination of these technologies. The book will be split into 4 main parts with each being dedicated to a specific user interface. Part 1 ''Touch Interfaces'' will provide a review of the currently deployed touch-screen technologies and applications. It will also cover the recent developments towards achieving thinner, lightweight and cost-reduced touch screen panels in the future via integration of touch functionalities. Part 2 ''Gesture Interfaces'' will examine techniques and applications in stereoscopic 3D computer vision, structured-light 3D computer vision and time-of-flight 3D computer vision in gesture interfaces. Part 3 ''Voice Interfaces'' will revie...

  5. Next Generation Flight Displays Using HTML5

    Science.gov (United States)

    Greenwood, Brian

    2016-01-01

    The Human Integrated Vehicles and Environments (HIVE) lab at Johnson Space Center (JSC) is focused on bringing together inter-disciplinary talent to design and integrate innovative human interface technologies for next generation manned spacecraft. As part of this objective, my summer internship project centered on an ongoing investigation in to building flight displays using the HTML5 standard. Specifically, the goals of my project were to build and demo "flight-like" crew and wearable displays as well as create a webserver for live systems being developed by the Advanced Exploration Systems (AES) program. In parallel to my project, a LabVIEW application, called a display server, was created by the HIVE that uses an XTCE (XML (Extensible Markup Language) Telemetry and Command Exchange) parser and CCSDS (Consultative Committee for Space Data System) space packet decoder to translate telemetry items sent by the CFS (Core Flight Software) over User Datagram Protocol (UDP). It was the webserver's job to receive these UDP messages and send them to the displays. To accomplish this functionality, I utilized Node.js and the accompanying Express framework. On the display side, I was responsible for creating the power system (AMPS) displays. I did this by using HTML5, CSS and JavaScript to create web pages that could update and change dynamically based on the data they received from the webserver. At this point, I have not started on the commanding, being able to send back to the CFS, portion of the displays but hope to have this functionality working by the completion of my internship. I also created a way to test the webserver's functionality without the display server by making a JavaScript application that read in a comma-separate values (CSV) file and converted it to XML which was then sent over UDP. One of the major requirements of my project was to build everything using as little preexisting code as possible, which I accomplished by only using a handful of Java

  6. Automated Analysis, Classification, and Display of Waveforms

    Science.gov (United States)

    Kwan, Chiman; Xu, Roger; Mayhew, David; Zhang, Frank; Zide, Alan; Bonggren, Jeff

    2004-01-01

    A computer program partly automates the analysis, classification, and display of waveforms represented by digital samples. In the original application for which the program was developed, the raw waveform data to be analyzed by the program are acquired from space-shuttle auxiliary power units (APUs) at a sampling rate of 100 Hz. The program could also be modified for application to other waveforms -- for example, electrocardiograms. The program begins by performing principal-component analysis (PCA) of 50 normal-mode APU waveforms. Each waveform is segmented. A covariance matrix is formed by use of the segmented waveforms. Three eigenvectors corresponding to three principal components are calculated. To generate features, each waveform is then projected onto the eigenvectors. These features are displayed on a three-dimensional diagram, facilitating the visualization of the trend of APU operations.

  7. Amorphous Silicon Display Backplanes on Plastic Substrates

    Science.gov (United States)

    Striakhilev, Denis; Nathan, Arokia; Vygranenko, Yuri; Servati, Peyman; Lee, Czang-Ho; Sazonov, Andrei

    2006-12-01

    Amorphous silicon (a-Si) thin-film transistor (TFT) backplanes are very promising for active-matrix organic light-emitting diode displays (AMOLEDs) on plastic. The technology benefits from a large manufacturing base, simple fabrication process, and low production cost. The concern lies in the instability of the TFTs threshold voltage (VT) and its low device mobility. Although VT-instability can be compensated by means of advanced multi-transistor pixel circuits, the lifetime of the display is still dependent on the TFT process quality and bias conditions. A-Si TFTs with field-effect mobility of 1.1 cm2/V · s and pixel driver circuits have been fabricated on plastic substrates at 150 °C. The circuits are characterized in terms of current drive capability and long-term stability of operation. The results demonstrate sufficient and stable current delivery and the ability of the backplane on plastic to meet AMOLED requirements.

  8. Teachers’ Use of Display vs. Referential Questions

    OpenAIRE

    Mohammad Zohrabi; Massoud Yaghoubi-Notash; Sanaz Yousefzadeh Khiabani

    2014-01-01

    With the growing interest in interaction in communicative language teaching, interactive features of classroom have gained more prominence. Questions as an important technique used by the teacher to promote classroom interaction have an important say in the matter. In this study the researchers investigated the frequency of use of two types of questions, that is, display and referential questions, at three levels of proficiency (elementary, intermediate and advanced). Furthermore, their inter...

  9. Camouflage and Display for Soft Machines

    OpenAIRE

    Morin, Stephen A.; Shepherd, Robert F.; Kwok, Sen Wai; Stokes, Adam A.; Nemiroski, Alex; Whitesides, George M.

    2012-01-01

    Synthetic systems cannot easily mimic the color-changing abilities of animals such as cephalopods. Soft machines—machines fabricated from soft polymers and flexible reinforcing sheets—are rapidly increasing in functionality. This manuscript describes simple microfluidic networks that can change the color, contrast, pattern, apparent shape, luminescence, and surface temperature of soft machines for camouflage and display. The color of these microfluidic networks can be changed simultaneously i...

  10. BNL325 - Nuclear reaction data display program

    International Nuclear Information System (INIS)

    A computer code for the graphical display of nuclear reaction data is described. The code, which works on a computer with VMS operating system, can overlay experimental data from an EXFOR/CSISRS table-computation format with evaluated data from ENDF formatted data libraries. Originally, this code has been used at the U.S. National Nuclear Data Center to produce the well-known neutron cross-section atlas published as report BNL-325. (author). 3 tabs

  11. SureTrak Probability of Impact Display

    Science.gov (United States)

    Elliott, John

    2012-01-01

    The SureTrak Probability of Impact Display software was developed for use during rocket launch operations. The software displays probability of impact information for each ship near the hazardous area during the time immediately preceding the launch of an unguided vehicle. Wallops range safety officers need to be sure that the risk to humans is below a certain threshold during each use of the Wallops Flight Facility Launch Range. Under the variable conditions that can exist at launch time, the decision to launch must be made in a timely manner to ensure a successful mission while not exceeding those risk criteria. Range safety officers need a tool that can give them the needed probability of impact information quickly, and in a format that is clearly understandable. This application is meant to fill that need. The software is a reuse of part of software developed for an earlier project: Ship Surveillance Software System (S4). The S4 project was written in C++ using Microsoft Visual Studio 6. The data structures and dialog templates from it were copied into a new application that calls the implementation of the algorithms from S4 and displays the results as needed. In the S4 software, the list of ships in the area was received from one local radar interface and from operators who entered the ship information manually. The SureTrak Probability of Impact Display application receives ship data from two local radars as well as the SureTrak system, eliminating the need for manual data entry.

  12. Mobile mediated interaction with pervasive displays

    OpenAIRE

    Seifert, Julian

    2015-01-01

    With the rise of pervasive computing, technology becomes increasingly embedded into our environments. As an effect, the number of available computing devices in our surroundings is increasing substantially. That is, a growing number of different device classes is at the user’s disposal. All these device classes potentially serve as pervasive displays that support users to perform all kinds of tasks. Possibilities based on direct interaction, such as touch, are limited regarding a number ...

  13. Dynamic exit pupil trackers for autostereoscopic displays

    OpenAIRE

    Akşit, Kaan; Ölçer, Selim; Ürey, Hakan; Baghsiahi, Hadi; Surman, Phil; Willman, Eero; Selviah, David R.; Day, Sally

    2013-01-01

    Dynamic exit pupil trackers for autostereoscopic displays Kaan Akşit,1,* Hadi Baghsiahi,2 Phil Surman,3 Selim Ӧlçer,1 Eero Willman,2 David R. Selviah,2 Sally Day, 2 and Hakan Urey1 1Koç University, Department of Electrical Engineering Istanbul, 34450, Turkey 2University College London, UCL, Department of Electronic & Electrical Engineering, WC1E 7JE, London, UK 3De Montfort University, Department of Computer Technology, Leicester, UK * Abstract: This...

  14. Inventions on Displaying and Resizing Windows

    OpenAIRE

    Mishra, Umakant

    2014-01-01

    Windows are used quite frequently in a GUI environment. The greatest advantage of using windows is that each window creates a virtual screen space. Hence, although the physical screen space is limited to a few inches, use of windows can create unlimited screen space to display innumerable items. The use of windows facilitates the user to open and interact with multiple programs or documents simultaneously in different windows. Sometimes a single program may also open multiple windows to displ...

  15. Vision Algorithms Catch Defects in Screen Displays

    Science.gov (United States)

    2014-01-01

    Andrew Watson, a senior scientist at Ames Research Center, developed a tool called the Spatial Standard Observer (SSO), which models human vision for use in robotic applications. Redmond, Washington-based Radiant Zemax LLC licensed the technology from NASA and combined it with its imaging colorimeter system, creating a powerful tool that high-volume manufacturers of flat-panel displays use to catch defects in screens.

  16. Acquisition and display of beam profilers

    Energy Technology Data Exchange (ETDEWEB)

    David, L.; Duneau, P.; Lecorche, E.; Lermine, P.; Vila, J.; Maugeais, C.; Ulrich, M.

    1995-12-31

    The ion beam adjustment requires the knowledge of its shape (its profile). A new electronic interface has been developed for the older multiwire profiles, while an other electronic equipment has been developed for the gas profiles and the microchannel plates. The data from these interfaces are computed to get numerical values and profile shapes, then transmitted by the network to the main control room to be displayed (shapes and data) on every workstation, by different beam tuning programs. (author). 4 refs.

  17. Acquisition and display of beam profilers

    International Nuclear Information System (INIS)

    The ion beam adjustment requires the knowledge of its shape (its profile). A new electronic interface has been developed for the older multiwire profiles, while an other electronic equipment has been developed for the gas profiles and the microchannel plates. The data from these interfaces are computed to get numerical values and profile shapes, then transmitted by the network to the main control room to be displayed (shapes and data) on every workstation, by different beam tuning programs. (author)

  18. Video display terminals - should operators be concerned

    International Nuclear Information System (INIS)

    Although modern offices have traditionally been thought to be among the safest places to work, over the past few years office workers have become concerned that video display terminals could be causing a variety of health problems. Extensive testing has occurred in many countries to determine if VDTs emit hazardous levels of ionizing or non-ionizing radiation. Results of these surveys suggest that radiation emissions are not of concern but that ergonomic factors in the office environment may need to be improved

  19. Feature Selection Approaches In Antibody Display

    OpenAIRE

    Polaka, Inese

    2015-01-01

    Molecular diagnostics tools provide specific data that have high dimensionality due to many factors analyzed in one experiment and few records due to high costs of the experiments. This study addresses the problem of dimensionality in melanoma patient antibody display data by applying data mining feature selection techniques. The article describes feature selection ranking and subset selection approaches and analyzes the performance of various methods evaluating selected feature subsets using...

  20. Quantitative evaluation of overall electronic display quality

    OpenAIRE

    Hangiandreou, Nicholas J.; Fetterly, Kenneth A.; Bernatz, Scott N.; Cesar, Laurie J.; Groth, Debra S.; Felmlee, Joel P.

    1998-01-01

    This study indicates that contrast-detail data should be very helpful in providing quantitative measurements of overall electronic display quality. The method would be suitable for new equipment selection, acceptance testing, and quality control. The recommended protocol would only involve observer data obtained using test images with mid-range background pixed values. Improvements to the current linear curve fit may also provide increased levels of measurement precision and sensitivity. To p...

  1. Delay in camera-to-display systems

    OpenAIRE

    2011-01-01

    Today we see an increasing number of time dependent visual computer systems, ranging from interactive video installations, via high definition teleconferencing to the high performance computer vision disciplines for example in industry and robotics. Common for all of these are the requirement for low and predictable delays from the system itself and its components. In this thesis, we look into the delay of camera-to-display computer systems to understand the properties of their delay com...

  2. How the user views visual displays

    Energy Technology Data Exchange (ETDEWEB)

    Brown-VanHoozer, S.A.

    1995-12-31

    Most designers are not schooled in the area of human-interaction psychology and therefore tend to rely on the traditional ergonomic aspects of human factors when designing complex human-interactive workstations. Unfortunately, by ignoring the importance of the integration of the user interface at the psychophysiological level, the result can be ineffective use of a system leading to an inherently error- and failure-prone system. Therefore, to minimize failures in a human-interactive system, it is essential that designers understand how each user`s processing characteristics affect how the user gathers and processes information. By understanding the significant processing characteristics of the user, designers can implement practical and effective visual displays (or any other type of system) that are more desirable to all users. The material presented in this paper is based on a general study that involved users` perspective views of how visual displays should be designed for effective use. The methodology used was Neuro-Linguistic Programming (NLP), because of its applicability in expanding design choices from the users` ``model of the world.`` The findings of the study have provided a beginning in the development of user comfort parameters and visual displays.

  3. Interaction Analysis through Proteomic Phage Display

    Directory of Open Access Journals (Sweden)

    Gustav N. Sundell

    2014-01-01

    Full Text Available Phage display is a powerful technique for profiling specificities of peptide binding domains. The method is suited for the identification of high-affinity ligands with inhibitor potential when using highly diverse combinatorial peptide phage libraries. Such experiments further provide consensus motifs for genome-wide scanning of ligands of potential biological relevance. A complementary but considerably less explored approach is to display expression products of genomic DNA, cDNA, open reading frames (ORFs, or oligonucleotide libraries designed to encode defined regions of a target proteome on phage particles. One of the main applications of such proteomic libraries has been the elucidation of antibody epitopes. This review is focused on the use of proteomic phage display to uncover protein-protein interactions of potential relevance for cellular function. The method is particularly suited for the discovery of interactions between peptide binding domains and their targets. We discuss the largely unexplored potential of this method in the discovery of domain-motif interactions of potential biological relevance.

  4. Prototype magnified and collimated autostereoscopic displays

    Science.gov (United States)

    Eichenlaub, Jesse B.

    1996-04-01

    Experiments indicate that the volume of virtual space within which stereoscopic images can be seen comfortably, without eye discomfort, fusion difficulty, or inaccuracies in perceived depth, is dependent upon the eye to screen distance. This volume is maximized when the screen appears to be at infinity--that is, when it is collimated. With the image collimated, objects located within a virtual space extending from a few feet in front of the observer to infinity can be viewed comfortably. Collimation also reduces the distortion seen in stereoscopic images when viewing them from off axis locations. DTI is developing two magnified and collimated autostereoscopic displays. One uses a collimation module designed for out the window simulators to provide a very wide angle, immersive image that is potentially well suited to flight simulators and video games. Another, more compact version uses Fresnel lenses to magnify the images of a high resolution 13.8" diagonal LCD to the same angular size as a 21" display seen at 30". This variation may be more suited to desktop displays. It provides resolution, color palette, and apparent screen size equivalent to a high end CRT.

  5. A Holographic Displaying System for Gastroscopy Diagnosis

    Directory of Open Access Journals (Sweden)

    Lu Yukying

    2015-01-01

    Full Text Available Gastroscopy is a common procedure for diagnosing the diseases in upper GI tract, in which a large number of localized and sometimes unstructured images on different parts of the upper GI tract are captured. While it is effective, the procedure also requires experienced doctors to carefully exam these images in real time. As a result, errors may occur causing miss and/or false diagnosis. This paper presents a holographic displaying system that can display the images in a 3D structured manner. It consists of four steps. First, the gastroscopy images are acquired from the standard gastroscopy procedure. Second, a 3D image is generated by means of panoramic mapping. Third, the 3D image is transferred into four images. Finally, the images are displayed in a 4-side pseudo 3D holographic system. The new system is capable of showing 3D structured view, based on which the doctor can carry on diagnosis more effectively. With further development, it is expected that the new system will find practical applications in hospital soon.

  6. CANDU 9 operator plant display system

    International Nuclear Information System (INIS)

    To meet evolving client and regulatory needs, AECL has adopted an evolutionary approach to the design of the CANDU 9 control centre. That is, the design incorporates feedback from existing stations, reflects the growing diversity in the roles and responsibilities of the operating staff, and reduces costs associated with plant capital and operations, maintenance and administration (OM and A), through the appropriate introduction of new technologies. Underlying this approach is a refined engineering design process that cost-effectively integrates operational feedback and human factors engineering to define the operating staff information and information presentation requirements. Based on this approach, the CANDU 9 control centre will provide utility operating staff with the means to achieve improved operations and reduced OM and A costs. One of the design features that will contribute to the improved operational capabilities of the control centre is a new Plant Display System (PDS) that is separate from the digital control system. The PDS will be used to implement non-safety panel, and console video display systems within the CANDU 9 main control room (MCR). This paper presents a detailed description of the CANDU 9 Plant Display System and features that provide increased operational capabilities. (author)

  7. Assessment of ultrasound monitor image display performance.

    Science.gov (United States)

    Moore, Sally C; Munnings, Craig R; Brettle, David S; Evans, J Anthony

    2011-06-01

    The display monitor on an ultrasound scanner is used to make primary diagnoses. In this study, 31 ultrasound systems were assessed against current American Association of Physicists in Medicine (AAPM) display standards. Measurements of peak levels (L(max) and L(min)) were generated. Ambient light, L(amb) (cd/m(2)) and room illuminance, L(x) (Lux) were measured. Luminance ratio was calculated (LR' = (L(max)+L(amb))/(L(min)+L(amb))). Initially, only 8/31 systems (26%) passed all the criteria. After adjustment, a further 7/31 (23%) passed making a total of 15/31 passes (48%). A total of 16/31 (52%) were considered overall fails: three due to poor room lighting, 14 due to poor monitor performance. Considering errors this could be as low as 6/31 (19%). Although further work is required to confirm the applicability of these results, it is of concern that three-quarters of ultrasound scanners could be suboptimally adjusted with 19%-55% unable to pass the AAPM criteria. The impact of this on clinical practice is unknown but there is clearly a need to review display quality assurance on ultrasound scanners. PMID:21601138

  8. Interaction analysis through proteomic phage display.

    Science.gov (United States)

    Sundell, Gustav N; Ivarsson, Ylva

    2014-01-01

    Phage display is a powerful technique for profiling specificities of peptide binding domains. The method is suited for the identification of high-affinity ligands with inhibitor potential when using highly diverse combinatorial peptide phage libraries. Such experiments further provide consensus motifs for genome-wide scanning of ligands of potential biological relevance. A complementary but considerably less explored approach is to display expression products of genomic DNA, cDNA, open reading frames (ORFs), or oligonucleotide libraries designed to encode defined regions of a target proteome on phage particles. One of the main applications of such proteomic libraries has been the elucidation of antibody epitopes. This review is focused on the use of proteomic phage display to uncover protein-protein interactions of potential relevance for cellular function. The method is particularly suited for the discovery of interactions between peptide binding domains and their targets. We discuss the largely unexplored potential of this method in the discovery of domain-motif interactions of potential biological relevance. PMID:25295249

  9. The CRT display evaluation: The multidimensional rating of CRT-generated displays

    Science.gov (United States)

    Getman, D. L.; Blackman, H. S.; Banks, W. W.; Petersen, R. J.

    1982-10-01

    This report is one in a series evaluating various methods for determining the effectiveness of display formats and contains results from multidimensional rating of three cathode ray tube displays. Each display contained information regarding the status of nine safety parameters critical to safe operations the Loss-Of-Fluid Test (LOFT) reactor located at the Idaho National Engineering Laboratory (INEL). Certified LOFT operators evaluated three formats - bars, stars, and meters - as part of a multimethod display evaluation ongoing at INEL. Each of the six cognitive dimensions embedded in the rating scale are discussed in terms of their internal consistency and ability to differentiate between each of the three formats. Preliminary findings suggest that two of the six dimensions, content integration and cognitive processing, were able to discriminate between formats while satisfying the criteria of internal consistency as measured by Cronbach's alpha. Conclusions in this report must be interpreted in light of moderate test-retest reliability.

  10. CRT display evaluation: the multidimensional rating of CRT-generated displays

    International Nuclear Information System (INIS)

    This report is one in a series evaluating various methods for determining the effectiveness of display formats and contains results from multidimensional rating of three cathode ray tube displays. Each display contained information regarding the status of nine safety parameters critical to safe operations at the Loss-of-Fluid Test (LOFT) reactor located at the Idaho National Engineering Laboratory (INEL). Certified LOFT operators evaluated three formats - bars, stars, and meters - as part of a multimethod display evaluation ongoing at INEL. Each of the six cognitive dimensions embedded in the rating scale are discussed in terms of their internal consistency and ability to differentiate between each of the three formats. Preliminary findings suggest that two of the six dimensions, content integration and cognitive processing, were able to discriminate between formats while satisfying the criteria of internal consistency as measured by Cronbach's alpha. Conclusions in this report must be interpreted in light of moderate test-retest reliability

  11. Low-cost color LCD helmet display

    Science.gov (United States)

    Leinenwever, Roger; Best, Leonard G.; Ericksen, Bryce J.

    1992-10-01

    The goal of this helmet-mounted display (HMD) project was development and demonstration of a low-cost color display incorporating see-through optics. A full field-of-regard visual presentation was to be provided through the use of a head-tracker system and the HMD was to be suitable for use with low-cost cockpit trainers. The color imaging devices selected for the project are commercially available liquid crystal display (LCD) panels. The LCDs are 3.0 inch (diagonal) thin film transistor (TFT) types using a delta format for the red, green, blue (RGB) matrix. Fiber optic light panels mounted behind the LCDs provide a cool light source of greater than 3400 foot-lamberts (ft-L). Approximately 3 percent of the applied light source is emitted by the LCD image source. The video displayed is in a 3:4 format representing a 30 degree(s) vertical by 40 degree(s) horizontal biocular instantaneous field-of-view (IFOV) visual image from a graphic image generation system and is controlled in a full field of regard based on positional information from a head-tracker system. The optical elements of the HMD are designed as an exit pupil forming, see-through system and require the eye to be in a 15 mm volume for viewing the scene. The beam splitting function of the optics allows the user to see through the optics for reading cockpit instrumentation, while viewing outside the cockpit reveals the out-the-window (OTW) scene. The optic design allows for the IFOV to be displayed through a set of field lens, relay lens, folding mirror, beam splitter and spherical mirror system. The beam splitters and spherical mirrors for both optical paths are coated for approximately 50 percent transmission and reflectance. This approach, combined with the losses through the rest of the optical path, provides a theoretical maximum of 10.9 percent of the LCD image source intensity arriving at the eye. Initial tests of image intensity at the eye for a full white scene have measured at approximately 11 ft-L.

  12. Recombinant Human Papillomavirus (HPV) Quadrivalent Vaccine

    Science.gov (United States)

    This page contains brief information about recombinant human papillomavirus (HPV) quadrivalent vaccine and a collection of links to more information about the use of this vaccine, research results, and ongoing clinical trials.

  13. Recombinant Human Papillomavirus (HPV) Bivalent Vaccine

    Science.gov (United States)

    This page contains brief information about recombinant human papillomavirus (HPV) bivalent vaccine and a collection of links to more information about the use of this vaccine, research results, and ongoing clinical trials.

  14. Recombinant Human Papillomavirus (HPV) Nonavalent Vaccine

    Science.gov (United States)

    This page contains brief information about recombinant human papillomavirus (HPV) nonavalent vaccine and a collection of links to more information about the use of this vaccine, research results, and ongoing clinical trials.

  15. RNAi and heterochromatin repress centromeric meiotic recombination

    DEFF Research Database (Denmark)

    Ellermeier, Chad; Higuchi, Emily C; Phadnis, Naina;

    2010-01-01

    During meiosis, the formation of viable haploid gametes from diploid precursors requires that each homologous chromosome pair be properly segregated to produce an exact haploid set of chromosomes. Genetic recombination, which provides a physical connection between homologous chromosomes, is....... Surprisingly, one mutant derepressed for recombination in the heterochromatic mating-type region during meiosis and several mutants derepressed for centromeric gene expression during mitotic growth are not derepressed for centromeric recombination during meiosis. These results reveal a complex relation between...... types of repression by heterochromatin. Our results also reveal a previously undemonstrated role for RNAi and heterochromatin in the repression of meiotic centromeric recombination and, potentially, in the prevention of birth defects by maintenance of proper chromosome segregation during meiosis....

  16. Genetic Analyses of Meiotic Recombination in Arabidopsis

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Meiosis is essential for sexual reproduction and recombination is a critical step required for normal meiosis. Understanding the underlying molecular mechanisms that regulate recombination ie important for medical, agricultural and ecological reasons. Readily available molecular and cytological tools make Arabidopsis an excellent system to study meiosis. Here we review recent developments in molecular genetic analyses on meiotic recombination. These Include studies on plant homologs of yeast and animal genes, as well as novel genes that were first identified in plants. The characterizations of these genes have demonstrated essential functions from the initiation of recombination by double-strand breaks to repair of such breaks, from the formation of double-Holliday junctions to possible resolution of these junctions, both of which are critical for crossover formation. The recent advances have ushered a new era in plant meiosis, in which the combination of genetics, genomics, and molecular cytology can uncover important gene functions.

  17. Recombinant vaccines: experimental and applied aspects

    DEFF Research Database (Denmark)

    Lorenzen, Niels

    1999-01-01

    Development of vaccines for aquaculture fish represent an important applied functional aspect of fish immunology research. Particularly in the case of recombinant vaccines, where a single antigen is usually expected to induce immunity to a specific pathogen, knowledge of mechanisms involved in...... induction of a protective immune response may become vital. The few recombinant vaccines licensd so far, despite much research during the last decade, illustrate that this is not a straightforward matter. However, as vaccine technology as well as our knowledge of the fish immune system is steadily improved......, these fields will open up a number of interesting research objectives of mutual benefit. Recent aspects of recombinant protein vaccines, live recombinant vaccines and DNA vaccines are discussed....

  18. Display on Display: Migrating Identities in Contemporary Francophone Literature and Music

    OpenAIRE

    Knox, Katelyn Elizabeth

    2013-01-01

    "Display on Display: Migrating Identities in Contemporary Francophone Literature and Music" examines Francophone cultural works of the twentieth and twenty-first centuries that grapple with constructions of sub-Saharan African immigrant identity in France. Its cultural studies methodology responds to a current lacuna in traditional philology-based literary studies that divorces literary expression from its wider cultural context, bringing to the fore questions of corporeality, history, and id...

  19. Efficient generation of recombinant adenoviral vectors by Cre-lox recombination in vitro.

    OpenAIRE

    Aoki, K.; Barker, C.; Danthinne, X; Imperiale, M J; Nabel, G. J.

    1999-01-01

    BACKGROUND: Although recombinant adenovirus vectors are attractive for use in gene expression studies and therapeutic applications, the construction of these vectors remains relatively time-consuming. We report here a strategy that simplifies the production of adenoviruses using the Cre-loxP system. MATERIALS AND METHODS: Full-length recombinant adenovirus DNA was generated in vitro by Cre-mediated recombination between loxP sites in a linearized shuttle plasmid containing a transgene and ade...

  20. Intermolecular recombination assay for mammalian cells that produces recombinants carrying both homologous and nonhomologous junctions.

    OpenAIRE

    Brouillette, S; Chartrand, P

    1987-01-01

    We present an intermolecular recombination assay for mammalian cells that does not involve the reconstitution of a selectable marker. It is based on the generation of a shuttle vector by recombination between a bacterial and a mammalian vector. The recombinants can thus be amplified in mammalian cells, isolated by plasmid rescue in an Escherichia coli RecA- host, and identified by in situ hybridization, by using mammalian vector sequences as probes. Since both parental molecules can share def...

  1. Advanced Colorimetry of Display Systems: Tetra-Chroma3 Display Unit

    Directory of Open Access Journals (Sweden)

    J. Kaiser

    2005-06-01

    Full Text Available High-fidelity color image reproduction is one of the key issues invisual telecommunication systems, for electronic commerce,telemedicine, digital museum and so on. All colorimetric standards ofdisplay systems are up to the present day trichromatic. But, from theshape of a horseshoe-area of all existing colors in the CIE xychromaticity diagram it follows that with three real reproductivelights, the stated area in the CIE xy chromaticity diagram cannot beoverlaid. The expansion of the color gamut of a display device ispossible in a few ways. In this paper, the way of increasing the numberof primaries is studied. The fourth cyan primary is added to threeconventional ones to enlarge the color gamut of reproduction towardscyans and yellow-oranges. The original method of color management forthis new display unit is introduced. In addition, the color gamut ofthe designed additive-based display is successfully compared with thecolor gamut of a modern subtractive-based system. A display with morethan three primary colors is called a multiprimary color display. Thevery advantageous property of such display is the possibility todisplay metameric colors.

  2. Signals From the Epoch of Cosmological Recombination

    OpenAIRE

    Sunyaev, R. A.; Chluba, J.

    2009-01-01

    The physical ingredients to describe the epoch of cosmological recombination are amazingly simple and well-understood. This fact allows us to take into account a very large variety of physical processes, still finding potentially measurable consequences for the energy spectrum and temperature anisotropies of the Cosmic Microwave Background (CMB). In this contribution we provide a short historical overview in connection with the cosmological recombination epoch and its connection to the CMB. A...

  3. Tunnel surface recombination in optoelectronic device modeling

    Science.gov (United States)

    Ptashchenko, Alexander A.; Ptashchenko, Fedor A.

    1997-08-01

    The rate of tunnel surface recombination (TSR) in a p-n structure has been calculated as a function of the excitation level and temperature in a semiclassical approximation under the assumption that the excess energy of a recombining electron is transferred to phonons or to a photon. The approximating analytical expressions obtained are applied in calculations of the effect of TSR on the characteristics of photodiodes, solar cells, light-emitting diodes and diode lasers.

  4. Recombinant DNA production of spider silk proteins

    OpenAIRE

    Tokareva, Olena; Michalczechen-Lacerda, Valquíria A; Rech, Elíbio L; Kaplan, David L.

    2013-01-01

    Spider dragline silk is considered to be the toughest biopolymer on Earth due to an extraordinary combination of strength and elasticity. Moreover, silks are biocompatible and biodegradable protein-based materials. Recent advances in genetic engineering make it possible to produce recombinant silks in heterologous hosts, opening up opportunities for large-scale production of recombinant silks for various biomedical and material science applications. We review the current strategies to produce...

  5. Algae-based oral recombinant vaccines

    OpenAIRE

    Specht, Elizabeth A.; Mayfield, Stephen P

    2014-01-01

    Recombinant subunit vaccines are some of the safest and most effective vaccines available, but their high cost and the requirement of advanced medical infrastructure for administration make them impractical for many developing world diseases. Plant-based vaccines have shifted that paradigm by paving the way for recombinant vaccine production at agricultural scale using an edible host. However, enthusiasm for “molecular pharming” in food crops has waned in the last decade due to difficulty in ...

  6. Dielectronic recombination of hydrogen-like ions

    International Nuclear Information System (INIS)

    Decay dynamics of dielectronic recombination (DR) processes of H-like titanium ions was investigated with an electron beam ion trap. In the DR of H-like ions a K-shell vacancy is available even after the decay of the doubly excited state produced by the recombination. Therefore secondary X-ray emission is possible. An observed X-ray spectrum of DR obtained in the present experiment was well reproduced theoretically by taking into account the secondary X-rays

  7. Recombination-deficient mutant of Streptococcus faecalis.

    OpenAIRE

    Yagi, Y; Clewell, D B

    1980-01-01

    An ultraviolet radiation-sensitive derivative of Streptococcus faecalis strain JH2-2 was isolated and found to be deficient in recombination, using a plasmid-plasmid recombination system. The strain was sensitive to chemical agents which interact with deoxyribonucleic acid and also underwent deoxyribonucleic acid degradation after ultraviolet irradiation. Thus, the mutant has properties similar to those of recA strains of Escherichia coli.

  8. Use of adaptable displays for situation awareness support

    NARCIS (Netherlands)

    Vries, S. de; Veltman, H.; Breda, L. van

    2000-01-01

    Different tasks may require different displays. Are users able to select optimal displays? In a flight simulator experiment pilots performed various stereotypical fighter tasks, aided by a set of 2D and 3D displays. Goal of the research was to determine which type of display is optimal for which typ

  9. Unit information system operational displays for VVER-1000 reactors

    International Nuclear Information System (INIS)

    The role of high level operational displays is explained as well as the principles of the design of such displays. The tasks of WWER operating personnel are described and the support provided by operational displays is highlighted. The architecture of the displays is also dealt with. (A.K.)

  10. Recombination of U92+ ions with electrons

    International Nuclear Information System (INIS)

    Recombination of fully stripped U92+ ions with electrons has been investigated at the Experimental Storage Ring (ESR) in Darmstadt. Absolute recombination rate coefficients have been measured for relative energies from 0 to 33 eV. For energies greater than 20 meV the experimental result is well described by the theory for radiative recombination (RR). Below 20 meV the experimental rate increasingly exceeds the RR calculation as observed previously in the recombination of light bare ions as well as of Bi83+. This low-energy rate enhancement is shown to scale as Z2.6 for bare ions, where Z is the atomic number of the ion. The U92+ recombination rate enhancement is insensitive to changes of the electron density. Variation of the magnetic guiding field strength from 80 mT to 120 mT resulted in oscillations of the recombination rate at 0 eV. The oscillations are partly attributed to changes of the transverse electron temperature accompanying the change of the magnetic guiding field strength; partly they may be caused by uncompensated small changes of the interaction angle between the two beams. (orig.)

  11. Color plasma display. Thin, large and beautiful display for all; Color plasma display. Usuku, okiku, utsukushiku, soshite minnani

    Energy Technology Data Exchange (ETDEWEB)

    Okajima, T. [NEC Corp., Tokyo (Japan)

    1998-11-01

    Forty inch class color plasma display panel (PDP) has been commercialized for wall type TV. The luminous principle is the same as the fluorescent lamp. Fluorescent materials are excited by the vacuum UV light generated during the gas discharge in a discharge tube, to convert it into visible light. Red, green and blue fluorescent lamps are laid, and the on-off of lighting is controlled. Fluorescent lamps with a size less than 1 mm are adopted for the 40 inch class color PDP. Since they can not be arranged, structures and materials must be considered. The distance between electrodes is narrow about 100 {mu}m, and Xe is mixed in He and Ar based on the gas pressure at the start of discharge. A space between a pair of glass substrates makes a discharge cell, which is separated from an adjacent cell with a partition. Red, green and blue fluorescent materials are painted in the order. The discharge electrode plate (X-electrode) of the front substrate is transparent, and the emission of fluorescent materials is taken out of the panel through this. The wall charge amount which is the display information memory by scanning the X-electrode is controlled by the discharge between the data electrode (Y-electrode) on the rear glass substrate and X-electrode. 3 refs., 6 figs.

  12. Selection and control of applications in pervasive displays

    OpenAIRE

    Taivan C.; Jose R; Elhart I.

    2012-01-01

    Public displays are progressively embedded in urban settings. Such displays become elements of an integrated pervasive ecosystem in which vari-ous displays with multiple applications are accessed by multiple viewers. Still, many public displays employ content that is based on pre-defined schedules as encountered in conventional digital signage systems. We envision future dis-play deployments embedding many applications that are running concurrently and able to continuously react to users’ req...

  13. Generation of diploid Pichia pastoris strains by mating and their application for recombinant protein production

    Directory of Open Access Journals (Sweden)

    Chen Ming-Tang

    2012-07-01

    Full Text Available Abstract Background Yeast mating provides an efficient means for strain and library construction. However, biotechnological applications of mating in the methylotrophic yeast Pichia pastoris have been hampered because of concerns about strain stability of P. pastoris diploids. The aim of the study reported here is to investigate heterologous protein expression in diploid P. pastoris strains and to evaluate diploid strain stability using high cell density fermentation processes. Results By using a monoclonal antibody as a target protein, we demonstrate that recombinant protein production in both wild-type and glycoengineered P. pastoris diploids is stable and efficient during a nutrient rich shake flask cultivation. When diploid strains were cultivated under bioreactor conditions, sporulation was observed. Nevertheless, both wild-type and glycoengineered P. pastoris diploids showed robust productivity and secreted recombinant antibody of high quality. Specifically, the yeast culture maintained a diploid state for 240 h post-induction phase while protein titer and N-linked glycosylation profiles were comparable to that of a haploid strain expressing the same antibody. As an application of mating, we also constructed an antibody display library and used mating to generate novel full-length antibody sequences. Conclusions To the best of our knowledge, this study reports for the first time a comprehensive characterization of recombinant protein expression and fermentation using diploid P. pastoris strains. Data presented here support the use of mating for various applications including strain consolidation, variable-region glycosylation antibody display library, and process optimization.

  14. Conventions for reporting and displaying overflight observations

    International Nuclear Information System (INIS)

    During the critical initial phases of an oil spill response, as observations and reports come in from different agencies and companies, descriptions and representations can vary widely. These apparently conflicting reports can cause unnecessary confusion, wasting valuable time and resources. As the number of open-quotes expertsclose quotes and the amount of open-quotes necessaryclose quotes information multiply, the potential for information overload also increases. Important information that needs to be presented can be lost in the flood of information that is available. For many years the National Oceanic and Atmospheric Administration (NOAA), in support of the US Coast Guard, has coordinated scientific input concerning the tracking and prediction of the transport of oil spilled in the marine environment. This role frequently involves recording visual or remote sensing observations from multiple platforms and observers, and displaying the information in a clear format, which needs to be rapidly available and unambiguous. Simple graphic products help identify conflicting views of information and allow responders to quickly build a open-quotes graphic consensusclose quotes of the situation. To this end the authors have developed in-house guidelines for presentation of crucial response information. Because correctly designed graphics can clearly and rapidly transmit large amounts of information, these guidelines focus on the graphic presentation of information. Some of these same conventions and criteria are being applied in evaluating and developing information acquisition and display tools. This poster presentation includes examples of the hardware and software used by Genwest and NOAA for the rapid display of response information

  15. Efficient polarization converter for projection displays.

    Science.gov (United States)

    Yip, W C; Huang, H C; Kwok, H S

    1997-09-01

    In the waveguiding limit, a twisted nematic liquid crystal cell behaves as an achromatic polarization rotator. We propose and demonstrate the application of such a polarization rotator to convert unpolarized light into linearly polarized light with almost 100% efficiency. This polarization converter has a 2:1 aspect ratio, which is close to the 16:9 ratio for modern televisions. It can be used therefore in a projection display with polarization-dependent light valves such as a liquid crystal light valve. Both transmittive and reflective light valves can be used. The temperature dependence of the achromatic polarization rotator is also studied. PMID:18259503

  16. Spatial adaptation on video display terminals

    Energy Technology Data Exchange (ETDEWEB)

    Greenhouse, D.S.; Bailey, I.L.; Howarth, P.A.; Berman, S.M.

    1989-01-01

    Spatial adaptation, in the form of a frequency-specific reduction in contrast sensitivity, can occur when the visual system is exposed to certain stimuli. We employed vertical sinusoidal test gratings to investigate adaptation to the horizontal structure of text presented on a standard video display terminal. The parameters of the contrast sensitivity test were selected on the basis of waveform analysis of spatial luminance scans of the text stimulus. We found that subjects exhibited a small, but significant, frequency-specific adaptation consistent with the spatial frequency spectrum of the stimulus. Theoretical and practical significance of this finding are discussed. 6 refs., 4 figs.

  17. Recombination analysis based on the complete genome of bocavirus

    Directory of Open Access Journals (Sweden)

    Chen Shengxia

    2011-04-01

    Full Text Available Abstract Bocavirus include bovine parvovirus, minute virus of canine, porcine bocavirus, gorilla bocavirus, and Human bocaviruses 1-4 (HBoVs. Although recent reports showed that recombination happened in bocavirus, no systematical study investigated the recombination of bocavirus. The present study performed the phylogenetic and recombination analysis of bocavirus over the complete genomes available in GenBank. Results confirmed that recombination existed among bocavirus, including the likely inter-genotype recombination between HBoV1 and HBoV4, and intra-genotype recombination among HBoV2 variants. Moreover, it is the first report revealing the recombination that occurred between minute viruses of canine.

  18. Engineering bacterial surface displayed human norovirus capsid proteins: A novel system to explore interaction between norovirus and ligands

    Directory of Open Access Journals (Sweden)

    Mengya eNiu

    2015-12-01

    Full Text Available Human noroviruses (HuNoVs are major contributors to acute nonbacterial gastroenteritis outbreaks. Many aspects of HuNoVs are poorly understood due to both the current inability to culture HuNoVs, and the lack of efficient small animal models. Surrogates for HuNoVs, such as recombinant viral like particles (VLPs expressed in eukaryotic system or P particles expressed in prokaryotic system, have been used for studies in immunology and interaction between the virus and its receptors. However, it is difficult to use VLPs or P particles to collect or isolate potential ligands binding to these recombinant capsid proteins. In this study, a new strategy was used to collect HuNoVs binding ligands through the use of ice nucleation protein (INP to display recombinant capsid proteins of HuNoVs on bacterial surfaces. The viral protein-ligand complex could be easily separated by a low speed centrifugation step. This system was also used to explore interaction between recombinant capsid proteins of HuNoVs and their receptors. In this system, the VP1 capsid encoding gene (ORF2 and the protruding domain (P domain encoding gene (3’ terminal fragment of ORF2 of HuNoVs GI.1 and GII.4 were fused with 5’ terminal fragment of ice nucleation protein encoding gene (inaQn. The results demonstrated that the recombinant VP1 and P domains of HuNoVs were expressed and anchored on the surface of Escherichia coli BL21 cells after the bacteria were transformed with the corresponding plasmids. Both cell surface displayed VP1 and P domains could be recognized by HuNoVs specific antibodies and interact with the viral histo-blood group antigens receptors. In both cases, displayed P domains had better binding abilities than VP1. This new strategy of using displayed HuNoVs capsid proteins on the bacterial surface could be utilized to separate HuNoVs binding components from complex samples, to investigate interaction between the virus and its receptors, as well as to develop an

  19. Computer generated movies to display biotelemetry data

    International Nuclear Information System (INIS)

    The three dimensional nature of biotelemetry data (x, y, time) makes them difficult to comprehend. Graphic displays provide a means of extracting information and analyzing biotelemetry data. The extensive computer graphics facilities at Los Alamos Scientific Laboratory have been utilized to analyze elk biotelemetry data. Fixes have been taken weekly for 14 months on 14 animals'. The inadequacy of still graphic displays to portray the time dimension of this data has lead to the use of computer generated movies to help grasp time relationships. A computer movie of the data from one animal demonstrates habitat use as a function of time, while a movie of 2 or more animals illustrates the correlations between the animals movements. About 2 hours of computer time were required to generate the movies for each animal for 1 year of data. The cost of the movies is quite small relative to the cost of collecting the data, so that computer generated movies are a reasonable method to depict biotelemetry data

  20. Adaptive user displays for intelligent tutoring software.

    Science.gov (United States)

    Beal, Carole R

    2004-12-01

    Intelligent tutoring software (ITS) holds great promise for K-12 instruction. Yet it is difficult to obtain rich information about users that can be used in realistic educational delivery settings--public school classrooms--in which eye tracking and other user sensing technologies are not suitable. We are pursuing three "cheap and cheerful" strategies to meet this challenge in the context of an ITS for high school math instruction. First, we use detailed representations of student cognitive skills, including tasks to assess individual users' proficiency with abstract reasoning, proficiency with simple math facts and computational skill, and spatial ability. Second, we are using data mining and machine learning algorithms to identify instructional sequences that have been effective with previous students, and to use these patterns to make decisions about current students. Third, we are integrating a simple focus-of-attention tracking system into the software, using inexpensive, web cameras. This coarse-grained information can be used to time the display of multimedia hints, explanations, and examples when the user is actually looking at the screen, and to diagnose causes of problem-solving errors. The ultimate goal is to create non-intrusive software that can adapt the display of instructional information in real time to the user's cognitive strengths, motivation, and attention. PMID:15687804

  1. Tomographic display of ventilation-perfusion ratio

    International Nuclear Information System (INIS)

    Tomographic displays of the distribution of ventilation-perfusion ratio in six subjects with a single photon radionuclide computed tomography (RCT) were obtained. The distribution of ventilation (V) and perfusion (Q) were measured separately with continuous breathing of Kr-81m and with intravenous administration of Tc-99m labelled macroaggregates of human serum albumin (MAA). V/Q was calculated pixel-by-pixel and the distributions of V/Q were displayed in a logarithmic scale with the surrounding thoracic cage obtained from transmission CT. The number of voxel, ventilation and perfusion were plotted against log(V/Q). They had almost log normal distributions with smaller variances in healthy subjects than those with emphysema or bronchitis. In the former, much coincidence between V and Q was observed, whereas in the latter, dissociation was seen between them. This noninvasive technique provided not only the visualization of the distribution of V/Q in a transaxial images, but also the quantifications of the V-Q mismatch

  2. Market trends in the projection display industry

    Science.gov (United States)

    Dash, Sweta

    2001-03-01

    The projection display industry represents a multibillion- dollar market that includes four distinct technologies. High-volume consumer products and high-value business products drive the market, with different technologies being used in different application markets. The consumer market is dominated by rear CRT technology, especially in the projection TV segment. Rear LCD (liquid crystal display), MEMS/DLP (or Digital Light Processing TM) and LCOS (Liquid-crystal-on-silicon) TVs are slowly emerging as future competitors to rear CRT projectors. Front CRT projectors are also facing challenges from LCD and DLP technology for the home theater market while the business market is completely dominated by front LCD and DLP technology. Three-chip DLP projectors have replaced liquid crystal light valves in large venue applications where projectors have higher light output requirements. In recent years front LCD and LCOS projectors have been increasingly competing with 3-chip DLP projectors especially at the low end of the large venue application market. Within the next five years the projection market will experience very fast growth. Sales and presentation applications, which are the fastest growing applications in the business market, will continue to be the major driving force for the growth for front projectors, and the shift in the consumer market to digital and HDTV products will drive the rear projection market.

  3. Using the Human Eye to Characterize Displays

    Science.gov (United States)

    Gille, Jennifer; Larimer, James; Rutkowski, Michael (Technical Monitor)

    2001-01-01

    Monitor characterization has taken on new importance for non-professional users, who are not usually equipped to make photometric measurements. We studied adjusting brightness to set the black level, banding effects due to digitization, and gamma estimation in the light and in the dark, and a color-matching task in the light, on a desktop CRT (Cathode-Ray Tube) and a laptop LCD (Liquid Crystal Display). Observers demonstrated the sensitivity of the visual system for comparative judgments in black-level adjustment, banding visibility, and gamma estimation. The results of the color-matching task were ambiguous. In the brightness adjustment task, the action of the adjustment was not as presumed; however, perceptual judgments were as expected under the actual conditions. When the gamma estimates of observers were compared to photometric measurements, problems with the definition of gamma were identified. Information about absolute light levels that would be important for characterizing a displays, given the shortcomings of gamma in measuring apparent contrast, are not measurable by eye alone. The LCD was not studied as extensively as the CRT because of viewing-angle problems, and its transfer function did not follow a power law, rendering gamma estimation meaningless.

  4. Bidding for Representative Allocations for Display Advertising

    CERN Document Server

    Ghosh, Arpita; Papineni, Kishore; Vassilvitskii, Sergei

    2009-01-01

    Display advertising has traditionally been sold via guaranteed contracts -- a guaranteed contract is a deal between a publisher and an advertiser to allocate a certain number of impressions over a certain period, for a pre-specified price per impression. However, as spot markets for display ads, such as the RightMedia Exchange, have grown in prominence, the selection of advertisements to show on a given page is increasingly being chosen based on price, using an auction. As the number of participants in the exchange grows, the price of an impressions becomes a signal of its value. This correlation between price and value means that a seller implementing the contract through bidding should offer the contract buyer a range of prices, and not just the cheapest impressions necessary to fulfill its demand. Implementing a contract using a range of prices, is akin to creating a mutual fund of advertising impressions, and requires {\\em randomized bidding}. We characterize what allocations can be implemented with rando...

  5. Home Energy Displays: Consumer Adoption and Response

    Energy Technology Data Exchange (ETDEWEB)

    LaMarche, J.; Cheney, K.; Akers, C.; Roth, K.; Sachs, O.

    2012-12-01

    The focus of this project was to investigate the factors influencing consumer adoption of Home Energy Displays (HEDs) and to evaluate electricity consumption in households with basic HEDs versus enhanced feedback methods - web portals or alerts. We hypothesized that providing flexible and relatable information to users, in addition to a basic HED, would make feedback more effective and achieve persistent energy savings. In Phase I, we conducted three user research studies and found preferences for aesthetically pleasing, easy to understand feedback that is accessible through multiple media and offered free of charge. The deployment of HEDs in 150 households planned for Phase II encountered major recruitment and HED field deployment problems. First, after extensive outreach campaigns to apartment complexes with 760 units, only 8% of building's tenants elected to receive a free HED in their homes as part of the field study. Second, the HED used, a leading market model, had a spectrum of problems, including gateway miscommunications, failure to post to a data-hosting third party, and display malfunctions. In light of these challenges, we are pursuing a modified study investigating the energy savings of a web portal versus alert-based energy feedback instead of a physical HED.

  6. Performance testing of passive autocatalytic recombiners (PARs)

    International Nuclear Information System (INIS)

    Passive autocatalytic recombiners (PARs) have been under consideration in the U.S. as a combustible gas control system in advanced light water reactor (ALWR) containments for design basis and severe accidents. PARs do not require a source of power. Instead they use palladium or platinum as a catalyst to recombine hydrogen and oxygen gases into water vapor upon contact with the catalyst. Energy from the recombination of hydrogen with oxygen is released at a relatively slow but continuous rate into the containment which prevents the pressure from becoming too high. The heat produced creates strong buoyancy effects which increases the influx of the surrounding gases to the recombiner. These natural convective flow currents promote mixing of combustible gases in the containment. PARs are self-starting and self-feeding under a very wide range of conditions. The recombination rate of the PAR system needs to be great enough to keep the concentration of hydrogen (or oxygen) below acceptable limits. There are several catalytic recombiner concepts under development worldwide. The USNRC is evaluating a specific design of a PAR which is in an advanced stage of engineering development and has been proposed for ALWR designs. Sandia National laboratories (SNL), under the sponsorship and the direction of the USNRC, is conducting an experimental program to evaluate the performance of PARs. The PAR will be tested at the SURTSEY facility at SNL. The test plan currently includes the following experiments: experiments will be conducted to define the startup characteristics of PARs (i.e., to define what is the lowest hydrogen concentration that the PAR starts recombining the hydrogen with oxygen); experiments will be used to define the hydrogen depletion rate of PARs as a function of hydrogen concentration; and experiments will be used to define the PAR performance in the presence of high concentrations of steam. (author)

  7. Characterization and Recombinant Expression of Terebrid Venom Peptide from Terebra guttata.

    Science.gov (United States)

    Moon, John; Gorson, Juliette; Wright, Mary Elizabeth; Yee, Laurel; Khawaja, Samer; Shin, Hye Young; Karma, Yasmine; Musunri, Rajeeva Lochan; Yun, Michelle; Holford, Mande

    2016-03-01

    Venom peptides found in terebrid snails expand the toolbox of active compounds that can be applied to investigate cellular physiology and can be further developed as future therapeutics. However, unlike other predatory organisms, such as snakes, terebrids produce very small quantities of venom, making it difficult to obtain sufficient amounts for biochemical characterization. Here, we describe the first recombinant expression and characterization of terebrid peptide, teretoxin Tgu6.1, from Terebra guttata. Tgu6.1 is a novel forty-four amino acid teretoxin peptide with a VI/VII cysteine framework (C-C-CC-C-C) similar to O, M and I conotoxin superfamilies. A ligation-independent cloning strategy with an ompT protease deficient strain of E. coli was employed to recombinantly produce Tgu6.1. Thioredoxin was introduced in the plasmid to combat disulfide folding and solubility issues. Specifically Histidine-6 tag and Ni-NTA affinity chromatography were applied as a purification method, and enterokinase was used as a specific cleavage protease to effectively produce high yields of folded Tgu6.1 without extra residues to the primary sequence. The recombinantly-expressed Tgu6.1 peptide was bioactive, displaying a paralytic effect when injected into a Nereis virens polychaete bioassay. The recombinant strategy described to express Tgu6.1 can be applied to produce high yields of other disulfide-rich peptides. PMID:26950153

  8. Ethanol fermentation from lignocellulosic hydrolysate by a recombinant xylose- and cellooligosaccharide-assimilating yeast strain

    Energy Technology Data Exchange (ETDEWEB)

    Katahira, Satoshi; Fukuda, Hideki [Kobe Univ. (Japan). Div. of Molecular Science; Mizuike, Atsuko; Kondo, Akihiko [Kobe Univ. (Japan). Dept. of Chemical Science and Engineering

    2006-10-15

    The sulfuric acid hydrolysate of lignocellulosic biomass, such as wood chips, from the forest industry is an important material for fuel bioethanol production. In this study, we constructed a recombinant yeast strain that can ferment xylose and cellooligosaccharides by integrating genes for the intercellular expressions of xylose reductase and xylitol dehydrogenase from Pichia stipitis, and xylulokinase from Saccharomyces cerevisiae and a gene for displaying ss-glucosidase from Aspergillus acleatus on the cell surface. In the fermentation of the sulfuric acid hydrolysate of wood chips, xylose and cellooligosaccharides were completely fermented after 36 h by the recombinant strain, and then about 30 g/l ethanol was produced from 73 g/l total sugar added at the beginning. In this case, the ethanol yield of this recombinant yeast was much higher than that of the control yeast. These results demonstrate that the fermentation of the lignocellulose hydrolysate is performed efficiently by the recombinant Saccharomyces strain with abilities for xylose assimilation and cellooligosaccharide degradation. (orig.)

  9. Multiple regulation of Rad51-mediated homologous recombination by fission yeast Fbh1.

    Science.gov (United States)

    Tsutsui, Yasuhiro; Kurokawa, Yumiko; Ito, Kentaro; Siddique, Md Shahjahan P; Kawano, Yumiko; Yamao, Fumiaki; Iwasaki, Hiroshi

    2014-08-01

    Fbh1, an F-box helicase related to bacterial UvrD, has been proposed to modulate homologous recombination in fission yeast. We provide several lines of evidence for such modulation. Fbh1, but not the related helicases Srs2 and Rqh1, suppressed the formation of crossover recombinants from single HO-induced DNA double-strand breaks. Purified Fbh1 in complex with Skp1 (Fbh1-Skp1 complex) inhibited Rad51-driven DNA strand exchange by disrupting Rad51 nucleoprotein filaments in an ATP-dependent manner; this disruption was alleviated by the Swi5-Sfr1 complex, an auxiliary activator of Rad51. In addition, the reconstituted SCFFbh1 complex, composed of purified Fbh1-Skp1 and Pcu1-Rbx1, displayed ubiquitin-ligase E3 activity toward Rad51. Furthermore, Fbh1 reduced the protein level of Rad51 in stationary phase in an F-box-dependent, but not in a helicase domain-independent manner. These results suggest that Fbh1 negatively regulates Rad51-mediated homologous recombination via its two putative, unrelated activities, namely DNA unwinding/translocation and ubiquitin ligation. In addition to its anti-recombinase activity, we tentatively suggest that Fbh1 might also have a pro-recombination role in vivo, because the Fbh1-Skp1 complex stimulated Rad51-mediated strand exchange in vitro after strand exchange had been initiated. PMID:25165823

  10. Multiple regulation of Rad51-mediated homologous recombination by fission yeast Fbh1.

    Directory of Open Access Journals (Sweden)

    Yasuhiro Tsutsui

    2014-08-01

    Full Text Available Fbh1, an F-box helicase related to bacterial UvrD, has been proposed to modulate homologous recombination in fission yeast. We provide several lines of evidence for such modulation. Fbh1, but not the related helicases Srs2 and Rqh1, suppressed the formation of crossover recombinants from single HO-induced DNA double-strand breaks. Purified Fbh1 in complex with Skp1 (Fbh1-Skp1 complex inhibited Rad51-driven DNA strand exchange by disrupting Rad51 nucleoprotein filaments in an ATP-dependent manner; this disruption was alleviated by the Swi5-Sfr1 complex, an auxiliary activator of Rad51. In addition, the reconstituted SCFFbh1 complex, composed of purified Fbh1-Skp1 and Pcu1-Rbx1, displayed ubiquitin-ligase E3 activity toward Rad51. Furthermore, Fbh1 reduced the protein level of Rad51 in stationary phase in an F-box-dependent, but not in a helicase domain-independent manner. These results suggest that Fbh1 negatively regulates Rad51-mediated homologous recombination via its two putative, unrelated activities, namely DNA unwinding/translocation and ubiquitin ligation. In addition to its anti-recombinase activity, we tentatively suggest that Fbh1 might also have a pro-recombination role in vivo, because the Fbh1-Skp1 complex stimulated Rad51-mediated strand exchange in vitro after strand exchange had been initiated.

  11. Highly diverse recombining populations of Vibrio cholerae and Vibrio parahaemolyticus in French Mediterranean coastal lagoons.

    Science.gov (United States)

    Esteves, Kévin; Mosser, Thomas; Aujoulat, Fabien; Hervio-Heath, Dominique; Monfort, Patrick; Jumas-Bilak, Estelle

    2015-01-01

    Vibrio parahaemolyticus and Vibrio cholerae are ubiquitous to estuarine and marine environments. These two species found in Mediterranean coastal systems can induce infections in humans. Environmental isolates of V. cholerae (n = 109) and V. parahaemolyticus (n = 89) sampled at different dates, stations and water salinities were investigated for virulence genes and by a multilocus sequence-based analysis (MLSA). V. cholerae isolates were all ctxA negative and only one isolate of V. parahaemolyticus displayed trh2 gene. Most Sequence Types (ST) corresponded to unique ST isolated at one date or one station. Frequent recombination events were detected among different pathogenic species, V. parahaemolyticus, V. cholerae, Vibrio mimicus, and Vibrio metoecus. Recombination had a major impact on the diversification of lineages. The genetic diversity assessed by the number of ST/strain was higher in low salinity condition for V. parahaemolyticus and V. cholerae whereas the frequency of recombination events in V. cholerae was lower in low salinity condition. Mediterranean coastal lagoon systems housed V. cholerae and V. parahaemolyticus with genetic diversities equivalent to the worldwide diversity described so far. The presence of STs found in human infections as well as the frequency of recombination events in environmental vibrios populations could predict a potential epidemiological risk. PMID:26236294

  12. Characterization and Recombinant Expression of Terebrid Venom Peptide from Terebra guttata

    Directory of Open Access Journals (Sweden)

    John Moon

    2016-03-01

    Full Text Available Venom peptides found in terebrid snails expand the toolbox of active compounds that can be applied to investigate cellular physiology and can be further developed as future therapeutics. However, unlike other predatory organisms, such as snakes, terebrids produce very small quantities of venom, making it difficult to obtain sufficient amounts for biochemical characterization. Here, we describe the first recombinant expression and characterization of terebrid peptide, teretoxin Tgu6.1, from Terebra guttata. Tgu6.1 is a novel forty-four amino acid teretoxin peptide with a VI/VII cysteine framework (C–C–CC–C–C similar to O, M and I conotoxin superfamilies. A ligation-independent cloning strategy with an ompT protease deficient strain of E. coli was employed to recombinantly produce Tgu6.1. Thioredoxin was introduced in the plasmid to combat disulfide folding and solubility issues. Specifically Histidine-6 tag and Ni-NTA affinity chromatography were applied as a purification method, and enterokinase was used as a specific cleavage protease to effectively produce high yields of folded Tgu6.1 without extra residues to the primary sequence. The recombinantly-expressed Tgu6.1 peptide was bioactive, displaying a paralytic effect when injected into a Nereis virens polychaete bioassay. The recombinant strategy described to express Tgu6.1 can be applied to produce high yields of other disulfide-rich peptides.

  13. Emiflective Display with Integration of Reflective Liquid Crystal Display and Organic Light Emitting Diode

    Science.gov (United States)

    Yang, Bo-Ru; Liu, Kang-Hung; Shieh, Han-Ping D.

    2007-01-01

    A novel emi-flective display which integrates a reflective liquid crystal display (R-LCD) and an organic light emitting diode (OLED) was demonstrated, whose OLED achieved a gain factor of 8 in contrast ratio (CR) compared with the conventional OLED. Under the high light ambience, the R-LCD is sustained with the CR of 10:1 at the viewing angle between ± 55°; while in the dim ambience, the OLED is operated with the CR of 5000:1 at ± 50°. By replacing the backlight system with OLED, emi-flective display has the benefits of lighter weight (<90%), thinner form factor (<40%), and lower power consumption (<2%, under sunlight) compared with the conventional LCD; therefore, to be very applicable for mobile products.

  14. Construction of the Bac-to-Bac System of Bombyx mori Nucleopolyhedroviru

    Institute of Scientific and Technical Information of China (English)

    Jin-shan HUANG; Bi-fang HAO; Xiu-lian SUN; Fei DENG; Hua-lin WANG; Zhi-hong HU

    2007-01-01

    To construct the Bac-to-Bac expression system of Bombyx mori nucleopolyhedrovirus (BmNPV), a transfer vector was constructed which contained an Escherichia coli (E. coli) mini-F replicon and a lacZ: attTN7: lacZ cassette within the upstream and downstream regions of the BmNPV polyhedrin gene. B. mori larvae were cotransfected with wild-type BmNPV genomic DNA and the transfer vector through subcutaneous injection to generate recombinant viruses by homologous recombination in vivo. The genomic DNA of budded viruses extracted from the hemolymph of the transfected larvae was used to transform E. coli DH10B. Recombinant bacmids were screened by kanamycin resistance, PCR and restriction enzyme (REN) digestion. One of the bacmid colonies, BmBacJS13, which had similar REN profiles to that of wild-type BmNPV, was selected for further research. To investigate the infectivity of BmBacJS13, the polyhedrin gene was introduced into the bacmid and the resultant recombinant (BmBacJS13-ph) was transfected to BmN cells. The budded viruses were collected from the supernatant of the transfected cells and used for infecting BmN cells. Growth curve analysis indicated that BmBacJS13-ph had a similar growth curve to that of wild-type BmNPV. Bio-assays indicated that BmBacJS13-ph was also infectious to B. mori larvae.

  15. Graded Recombination Layers for Multijunction Photovoltaics

    KAUST Repository

    Koleilat, Ghada I.

    2012-06-13

    Multijunction devices consist of a stack of semiconductor junctions having bandgaps tuned across a broad spectrum. In solar cells this concept is used to increase the efficiency of photovoltaic harvesting, while light emitters and detectors use it to achieve multicolor and spectrally tunable behavior. In series-connected current-matched multijunction devices, the recombination layers must allow the hole current from one cell to recombine, with high efficiency and low voltage loss, with the electron current from the next cell. We recently reported a tandem solar cell in which the recombination layer was implemented using a progression of n-type oxides whose doping densities and work functions serve to connect, with negligible resistive loss at solar current densities, the constituent cells. Here we present the generalized conditions for design of efficient graded recombination layer solar devices. We report the number of interlayers and the requirements on work function and doping of each interlayer, to bridge an work function difference as high as 1.6 eV. We also find solutions that minimize the doping required of the interlayers in order to minimize optical absorption due to free carriers in the graded recombination layer (GRL). We demonstrate a family of new GRL designs experimentally and highlight the benefits of the progression of dopings and work functions in the interlayers. © 2012 American Chemical Society.

  16. Human recombinant lysosomal enzymes produced in microorganisms.

    Science.gov (United States)

    Espejo-Mojica, Ángela J; Alméciga-Díaz, Carlos J; Rodríguez, Alexander; Mosquera, Ángela; Díaz, Dennis; Beltrán, Laura; Díaz, Sergio; Pimentel, Natalia; Moreno, Jefferson; Sánchez, Jhonnathan; Sánchez, Oscar F; Córdoba, Henry; Poutou-Piñales, Raúl A; Barrera, Luis A

    2015-01-01

    Lysosomal storage diseases (LSDs) are caused by accumulation of partially degraded substrates within the lysosome, as a result of a function loss of a lysosomal protein. Recombinant lysosomal proteins are usually produced in mammalian cells, based on their capacity to carry out post-translational modifications similar to those observed in human native proteins. However, during the last years, a growing number of studies have shown the possibility to produce active forms of lysosomal proteins in other expression systems, such as plants and microorganisms. In this paper, we review the production and characterization of human lysosomal proteins, deficient in several LSDs, which have been produced in microorganisms. For this purpose, Escherichia coli, Saccharomyces cerevisiae, Pichia pastoris, Yarrowia lipolytica, and Ogataea minuta have been used as expression systems. The recombinant lysosomal proteins expressed in these hosts have shown similar substrate specificities, and temperature and pH stability profiles to those produced in mammalian cells. In addition, pre-clinical results have shown that recombinant lysosomal enzymes produced in microorganisms can be taken-up by cells and reduce the substrate accumulated within the lysosome. Recently, metabolic engineering in yeasts has allowed the production of lysosomal enzymes with tailored N-glycosylations, while progresses in E. coli N-glycosylations offer a potential platform to improve the production of these recombinant lysosomal enzymes. In summary, microorganisms represent convenient platform for the production of recombinant lysosomal proteins for biochemical and physicochemical characterization, as well as for the development of ERT for LSD. PMID:26071627

  17. Cooperative control of visual displays for telemanipulation

    Science.gov (United States)

    Kim, Won S.; Stark, Lawrence W.

    1989-01-01

    Two cooperative control schemes for telerobot visual displays are addressed. In the first scheme, on-the-screen visual enhancements such as reference lines indicating the vertical height of the robot hand, a stick figure model of the robot hand, and its projection on the horizontal grid plane are constructed by the interactive cooperation between the human operator and the telerobotic system, and then superimposed on the video screen. Experimental results with a five-degree-of-freedom robot and a frame grabber indicate that superimposition of visual enhancements on the video screen greatly improves telemanipulation task performance. In the second scheme, the position and orientation of an object on video screens are determined interactively; these then assist the telerobotic system in executing the human operator's task-level commands autonomously.

  18. A compliant soft-actuator laterotactile display

    Science.gov (United States)

    Knoop, Espen; Rossiter, Jonathan

    2015-04-01

    Humans are extremely adept at eliciting useful information through touch, and the tactile domain has huge potential for handheld and wearable electronic devices. Smart materials may be central to exploiting this potential. The skin is highly sensitive to laterotactile stimulation, where tactile elements move laterally against the skin, and this modality is well suited for wearable devices. Wearable devices should be soft and compliant, in order to move with the user and be comfortable. We present and characterize a laterotactile display using soft and compliant dielectric elastomer actuators. We carry out an initial psychophysical study to determine the absolute sensitivity threshold of laterotactile stimulation, and find that at low frequencies sensitivity is higher than for normal tactile stimulation. Our results suggest that the mechanoreceptors close to the skin surface (SA1, FA1) have improved sensitivity to laterotactile stimulation. We believe our results lay the foundation for a range of new soft robotic human interface devices using smart materials.

  19. Home Energy Displays. Consumer Adoption and Response

    Energy Technology Data Exchange (ETDEWEB)

    LaMarche, Janelle [Fraunhofer Center for Sustainable Energy Systems, Cambridge, MA (United States); Cheney, K. [Fraunhofer Center for Sustainable Energy Systems, Cambridge, MA (United States); Akers, C. [Fraunhofer Center for Sustainable Energy Systems, Cambridge, MA (United States); Roth, K. [Fraunhofer Center for Sustainable Energy Systems, Cambridge, MA (United States); Sachs, O. [Fraunhofer Center for Sustainable Energy Systems, Cambridge, MA (United States)

    2012-12-01

    The focus of this project was to investigate the factors influencing consumer adoption of Home Energy Displays (HEDs) and to evaluate electricity consumption in households with basic HEDs versus enhanced feedback methods - web portals or alerts. The team hypothesized that providing flexible and relatable information to users, in addition to a basic HED, would make feedback more effective and achieve persistent energy savings. In Phase I, Fraunhofer conducted three user research studies and found preferences for aesthetically pleasing, easy to understand feedback that is accessible through multiple media and offered free of charge. The deployment of HEDs in 150 households planned for Phase II encountered major recruitment and HED field deployment problems. In light of these challenges, the team is pursuing a modified study investigating the energy savings of a web portal versus alert-based energy feedback instead of a physical HED.

  20. Light polarization in support of stereoscopic display

    Science.gov (United States)

    Walworth, Vivian K.

    2012-02-01

    The encoding of three-dimensional image pairs by polarization was proposed as early as the 1890s, perhaps stimulated by the popularity of stereoscopic photography, the proliferation of devices for viewing side-by-side stereoscopic images, and the invention of the anaglyph. The introduction of inexpensive sheet polarizing material gave rise to new three-dimensional technologies, starting in the 1930s with 16-mm black-and-white motion pictures projected by paired projectors equipped with orthogonally oriented polarizing filters. Further advances included the introduction of color, the concept of printing left- and right-eye images on a common carrier, and most recently the development of digital photography and the utilization of polarizers in both two- and three-dimensional digital color display.

  1. Jacquard-woven photonic bandgap fiber displays

    CERN Document Server

    Sayed, Imran; Skorobogatiy, Maksim

    2010-01-01

    We present an overview of photonic textile displays woven on a Jacquard loom, using newly discovered polymer photonic bandgap fibers that have the ability to change color and appearance when illuminated with ambient or transmitted light. The photonic fiber can be thin (smaller than 300 microns in diameter) and highly flexible, which makes it possible to weave in the weft on a computerized Jacquard loom and develop intricate double weave structures together with a secondary weft yarn. We demonstrate how photonic crystal fibers enable a variety of color and structural patterns on the textile, and how dynamic imagery can be created by balancing the ambient and emitted radiation. Finally, a possible application in security ware for low visibility conditions is described as an example.

  2. Voice-activated intelligent radiologic image display

    International Nuclear Information System (INIS)

    The authors present a computer-based expert computer system called Mammo-Icon, which automatically assists the radiologist's case analysis by reviewing the trigger phrase output of a commercially available voice transcription system in he domain of mammography. A commercially available PC-based voice dictation system is coupled to an expert system implemented on a microcomputer. Software employs the LISP and C computer languages. Mammo-Icon responds to the trigger phrase output of a voice dictation system with a textual discussion of the potential significance of the findings that have been described and a display of reference images that may help the radiologist to confirm a suspected diagnosis or consider additional diagnoses. This results in automatic availability of potentially useful computer-based expert advice, making such systems much more likely to be used in routine clinical practice

  3. IDEA: Interactive Display for Evolutionary Analyses

    Directory of Open Access Journals (Sweden)

    Carlton Jane M

    2008-12-01

    Full Text Available Abstract Background The availability of complete genomic sequences for hundreds of organisms promises to make obtaining genome-wide estimates of substitution rates, selective constraints and other molecular evolution variables of interest an increasingly important approach to addressing broad evolutionary questions. Two of the programs most widely used for this purpose are codeml and baseml, parts of the PAML (Phylogenetic Analysis by Maximum Likelihood suite. A significant drawback of these programs is their lack of a graphical user interface, which can limit their user base and considerably reduce their efficiency. Results We have developed IDEA (Interactive Display for Evolutionary Analyses, an intuitive graphical input and output interface which interacts with PHYLIP for phylogeny reconstruction and with codeml and baseml for molecular evolution analyses. IDEA's graphical input and visualization interfaces eliminate the need to edit and parse text input and output files, reducing the likelihood of errors and improving processing time. Further, its interactive output display gives the user immediate access to results. Finally, IDEA can process data in parallel on a local machine or computing grid, allowing genome-wide analyses to be completed quickly. Conclusion IDEA provides a graphical user interface that allows the user to follow a codeml or baseml analysis from parameter input through to the exploration of results. Novel options streamline the analysis process, and post-analysis visualization of phylogenies, evolutionary rates and selective constraint along protein sequences simplifies the interpretation of results. The integration of these functions into a single tool eliminates the need for lengthy data handling and parsing, significantly expediting access to global patterns in the data.

  4. Recombinant human erythropoietin in sports: a review

    Directory of Open Access Journals (Sweden)

    Rafael Maia de Almeida Bento

    2003-06-01

    Full Text Available Erythropoietin is an endogenous hormone of glicoproteic nature secreted by the kidneys and is the main regulator of the erythropoiesis. An alteration in its production generates a disturbance in the plasmatic concentration giving rise to several types of pathologies related to the hematopoietic system. The recombinant forms of erythropoietin have indiscriminately been used by athletes, mainly in endurance sports, by increasing the erythrocytes concentration, generating a better delivery of oxygen to the muscle tissue. The administration of recombinant erythropoietin was prohibited by the International Olympic Committee and its use considered as doping. This review has the intention to describe the physical, biological and pharmacokinetic properties of the endogenous erythropoietin, as well as its recombinant form, describing also its use in sports and the process of searching methodologies for its detection in doping control.

  5. Jet fragmentation via recombination of parton showers

    Science.gov (United States)

    Han, Kyong Chol; Fries, Rainer J.; Ko, Che Ming

    2016-04-01

    We propose to model hadronization of parton showers in QCD jets through a hybrid approach involving quark recombination and string fragmentation. This is achieved by allowing gluons at the end of the perturbative shower evolution to undergo a nonperturbative splitting into quark and antiquark pairs, then applying a Monte Carlo version of instantaneous quark recombination, and finally subjecting remnant quarks (those which have not found a recombination partner) to Lund string fragmentation. When applied to parton showers from the pythia Monte Carlo event generator, the final hadron spectra from our calculation compare quite well to pythia jets that have been hadronized with the default Lund string fragmentation. Our new approach opens up the possibility to generalize hadronization to jets embedded in a quark gluon plasma.

  6. Research and Development of Large Area Color AC Plasma Displays

    Science.gov (United States)

    Shinoda, Tsutae

    1998-10-01

    Plasma display is essentially a gas discharge device using discharges in small cavities about 0. 1 m. The color plasma displays utilize the visible light from phosphors excited by the ultra-violet by discharge in contrast to monochrome plasma displays utilizing visible light directly from gas discharges. At the early stage of the color plasma display development, the degradation of the phosphors and unstable operating voltage prevented to realize a practical color plasma display. The introduction of the three-electrode surface-discharge technology opened the way to solve the problems. Two key technologies of a simple panel structure with a stripe rib and phosphor alignment and a full color image driving method with an address-and-display-period-separated sub-field method have realized practically available full color plasma displays. A full color plasma display has been firstly developed in 1992 with a 21-in.-diagonal PDP and then a 42-in.-diagonal PDP in 1995 Currently a 50-in.-diagonal color plasma display has been developed. The large area color plasma displays have already been put into the market and are creating new markets, such as a wall hanging TV and multimedia displays for advertisement, information, etc. This paper will show the history of the surface-discharge color plasma display technologies and current status of the color plasma display.

  7. Industrial Personal Computer based Display for Nuclear Safety System

    International Nuclear Information System (INIS)

    The safety display of nuclear system has been classified as important to safety (SIL:Safety Integrity Level 3). These days the regulatory agencies are imposing more strict safety requirements for digital safety display system. To satisfy these requirements, it is necessary to develop a safety-critical (SIL 4) grade safety display system. This paper proposes industrial personal computer based safety display system with safety grade operating system and safety grade display methods. The description consists of three parts, the background, the safety requirements and the proposed safety display system design. The hardware platform is designed using commercially available off-the-shelf processor board with back plane bus. The operating system is customized for nuclear safety display application. The display unit is designed adopting two improvement features, i.e., one is to provide two separate processors for main computer and display device using serial communication, and the other is to use Digital Visual Interface between main computer and display device. In this case the main computer uses minimized graphic functions for safety display. The display design is at the conceptual phase, and there are several open areas to be concreted for a solid system. The main purpose of this paper is to describe and suggest a methodology to develop a safety-critical display system and the descriptions are focused on the safety requirement point of view

  8. Comparison of recombination models in organic bulk heterojunction solar cells

    International Nuclear Information System (INIS)

    Recombination in bulk-heterojunction (BHJ) organic solar cells is the key loss mechanism, and it directly affects characteristic parameters such as power conversion efficiency, short-circuit current, open-circuit voltage, and fill factor. However, which recombination mechanism dominates the loss in organic materials is unclear at present. In this work, we simulate state-of-art BHJ solar cells using five recombination models, including direct recombination, Langevin recombination, charge transfer state recombination, trap-assisted recombination, and recombination via tail. All processes are strongly dependent on charge carrier mobility and exhibit a similar recombination distribution in active layer. For high mobilities, all models present a similar behavior along with the increased mobilities, whereas, there are slight differences in open-circuit voltage between trap/tail model and other ones at lower mobilities, resulting from the interaction between photo-carriers and dark-carriers

  9. Production of functional human insulin-like growth factor binding proteins (IGFBPs) using recombinant expression in HEK293 cells

    DEFF Research Database (Denmark)

    Wanscher, Anne Sofie Molsted; Williamson, Michael; Ebersole, Tasja Wainani;

    2015-01-01

    Insulin-like growth factor binding proteins (IGFBPs) display many functions in humans including regulation of the insulin-like growth factor (IGF) signaling pathway. The various roles of human IGFBPs make them attractive protein candidates in drug discovery. Structural and functional knowledge on...... procedure and the final protein yields were between 1 and 12mg protein per liter culture media. The recombinant IGFBPs contained PTMs and exhibited high-affinity interactions with their natural ligands IGF-1 and IGF-2....

  10. SIR epidemics in monogamous populations with recombination

    CERN Document Server

    Zanette, Damián H

    2011-01-01

    We study the propagation of an SIR (susceptible-infectious-recovered) disease over an agent population which, at any instant, is fully divided into couples of agents. Couples are occasionally allowed to exchange their members. This process of couple recombination can compensate the instantaneous disconnection of the interaction pattern and thus allow for the propagation of the infection. We study the incidence of the disease as a function of its infectivity and of the recombination rate of couples, thus characterizing the interplay between the epidemic dynamics and the evolution of the population's interaction pattern.

  11. Quantum Electrodynamics Theory of Laser Assisted Recombination

    Institute of Scientific and Technical Information of China (English)

    敖淑艳; 程太旺; 李晓峰; 潘守甫; 傅盘铭

    2003-01-01

    Using a formal scattering theoretical approach, we develop a nonperturbative quantum electrodynamics theory to describe laser assisted recombination (LAR), in which an electron initially in the quantized Volkov state recombines with an ion and emits a high-energy photon with frequency defined by energy conservation laws.The transition probability is expressed as an analytic closed form and the spectrum of LAR reflects mainly the properties of general Bessel functions. For the case of a fast electron the LAR spectrum is confined in a well-defined range, while for a slow electron, the LAR spectrum exhibits a double-plateau structure.

  12. The Use of Festive Colors In Display Layout Design

    Institute of Scientific and Technical Information of China (English)

    樊旭

    2011-01-01

    In display layout design, Because colour performance for human psychology has a direct impact, therefore correctly apply colors bring to people's these emotional factors to determine the color display layout, prompting the audience a profound visual impre

  13. The Effect of Quantization Error on Display Color Gamut Transformation

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Researchers and designers who work with color displays often transform color gamut between two different display devices. This paper demonstrates the effect of quantization error on the transformation based on analyzing the color gamut deviation profoundly.

  14. Methods and apparatus for transparent display using scattering nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Hsu, Chia Wei; Qiu, Wenjun; Zhen, Bo; Shapira, Ofer; Soljacic, Marin

    2016-05-10

    Transparent displays enable many useful applications, including heads-up displays for cars and aircraft as well as displays on eyeglasses and glass windows. Unfortunately, transparent displays made of organic light-emitting diodes are typically expensive and opaque. Heads-up displays often require fixed light sources and have limited viewing angles. And transparent displays that use frequency conversion are typically energy inefficient. Conversely, the present transparent displays operate by scattering visible light from resonant nanoparticles with narrowband scattering cross sections and small absorption cross sections. More specifically, projecting an image onto a transparent screen doped with nanoparticles that selectively scatter light at the image wavelength(s) yields an image on the screen visible to an observer. Because the nanoparticles scatter light at only certain wavelengths, the screen is practically transparent under ambient light. Exemplary transparent scattering displays can be simple, inexpensive, scalable to large sizes, viewable over wide angular ranges, energy efficient, and transparent simultaneously.

  15. Student displays of academic competence in the international university

    DEFF Research Database (Denmark)

    Kristiansen, Elisabeth Dalby

    The study presents an ethnomethodologically founded understanding of academic competence as situated social practices displayed in and through social interaction. The project uses Conversation Analysis as a method for describing such displays of competence. The project describes the conversationa...

  16. Tomato bushy stunt virus (TBSV), a versatile platform for polyvalent display of antigenic epitopes and vaccine design

    International Nuclear Information System (INIS)

    Viruses-like particles (VLPs) are frequently being used as platforms for polyvalent display of foreign epitopes of interest on their capsid surface to improve their presentation enhancing the antigenicity and host immune response. In the present study, we used the VLPs of Tomato bushy stunt virus (TBSV), an icosahedral plant virus, as a platform to display 180 copies of 16 amino acid epitopes of ricin toxin fused to the C-terminal end of a modified TBSV capsid protein (NΔ52). Expression of the chimeric recombinant protein in insect cells resulted in spontaneous assembly of VLPs displaying the ricin epitope. Cryo-electron microscopy and image reconstruction of the chimeric VLPs at 22 A resolution revealed the locations and orientation of the ricin epitope exposed on the TBSV capsid surface. Furthermore, injection of chimeric VLPs into mice generated antisera that detected the native ricin toxin. The ease of fusing of short peptides of 15-20 residues and their ability to form two kinds (T = 1, T = 3) of bio-nanoparticles that result in the display of 60 or 180 copies of less constrained and highly exposed antigenic epitopes makes TBSV an attractive and versatile display platform for vaccine design.

  17. 3D Image Display Courses for Information Media Students.

    Science.gov (United States)

    Yanaka, Kazuhisa; Yamanouchi, Toshiaki

    2016-01-01

    Three-dimensional displays are used extensively in movies and games. These displays are also essential in mixed reality, where virtual and real spaces overlap. Therefore, engineers and creators should be trained to master 3D display technologies. For this reason, the Department of Information Media at the Kanagawa Institute of Technology has launched two 3D image display courses specifically designed for students who aim to become information media engineers and creators. PMID:26960028

  18. Predicting Display Visibility Under Dynamically Changing Lighting Conditions

    OpenAIRE

    Aydin, Tunc O.; Myszkowski, Karol; Seidel, Hans-Peter

    2009-01-01

    Display devices, more than ever, are finding their ways into electronic consumer goods as a result of recent trends in providing more functionality and user interaction. Combined with the new developments in display technology towards higher reproducible luminance range, the mobility and variation in capability of display devices are constantly increasing. Consequently, in real life usage it is now very likely that the display emission to be distorted by spatially and t...

  19. Display Scale in a ‘Document’ perspective : size matters

    OpenAIRE

    Olsen, Bernt Ivar

    2012-01-01

    The work summarized in this thesis has its basis in technology to support human collaboration. I have investigated how large, high-resolution display (LaHiRD) technology, implemented using display wall technology (large, tiled displays implemented as one coherent display surface) could support clinical work. Hence, I have worked with the topic of technological support for human collaboration (or –interaction) in a medical context. This thesis is three-tiered; one layer is related to how a cer...

  20. The Evaluation of a Graphical Pulmonary Display in Anesthesiology

    OpenAIRE

    Wachter, S. Blake; Syroid, Noah; Agutter, James; Albert, Robert; Drews, Frank; Westenskow, Dwayne

    2003-01-01

    We have developed graphic technology to display data from the respiratory monitors used during anesthesia. The display uses color, texture, shape and emergent features to highlight abnormal pulmonary physiology. Nineteen anesthesiologists participated in a simulator based evaluation (METI, Sarasota, FL.). Half the subjects used the metaphor display and half did not. Each subject was trained for 10 minutes on the pulmonary display. The time difference during the obstructed endotracheal tube di...

  1. Pervasive displays understanding the future of digital signage

    CERN Document Server

    Davies, Nigel; Alt, Florian

    2014-01-01

    Fueled by falling display hardware costs and rising demand, digital signage and pervasive displays are becoming ever more ubiquitous. Such systems have traditionally been used for advertising and information dissemination, with digital signage commonplace in shopping malls, airports and public spaces. While advertising and broadcasting announcements remain important applications, developments in sensing and interaction technologies are enabling entirely new classes of display applications that tailor content to the situation and audience of the display. As a result, signage systems are beginni

  2. Generation of xylooligosaccharides from microwave irradiated agroresidues using recombinant thermo-alkali-stable endoxylanase of the polyextremophilic bacterium Bacillus halodurans expressed in Pichia pastoris.

    Science.gov (United States)

    Kumar, Vikash; Satyanarayana, T

    2015-03-01

    The recombinant Pichia pastoris harboring the endoxylanase gene (TSEV1xyl) of Bacillus halodurans TSEV1 yielded a high titer of extracellular xylanase (502±23 U ml(-1)) on induction with methanol. The purified recombinant xylanase (TSEV1xyl) displayed optimal activity at 80°C and pH 9.0. The glycosylated recombinant xylanase exhibited higher thermostability (T1/2 of 45 min at 80°C) than the native enzyme (T1/2 of 35 min at 80°C). The agroresidues subjected to pretreatment (soaking in alkali followed by microwave irradiation) liberated xylooligosaccharides (XOS) upon hydrolysis with the recombinant xylanase. The removal of unhydrolyzed agroresidues, xylanase and xylose from the hydrolysate by two-step ultrafiltration led to the purification of XOS as confirmed by TLC as well as HPLC analysis. PMID:25553569

  3. Recombinant microorganisms for increased production of organic acids

    Science.gov (United States)

    Yi, Jian; Kleff, Susanne; Guettler, Michael V

    2013-04-30

    Disclosed are recombinant microorganisms for producing organic acids. The recombinant microorganisms express a polypeptide that has the enzymatic activity of an enzyme that is utilized in the pentose phosphate cycle. The recombinant microorganism may include recombinant Actinobacillus succinogenes that has been transformed to express a Zwischenferment (Zwf) gene. The recombinant microorganisms may be useful in fermentation processes for producing organic acids such as succinic acid and lactic acid. Also disclosed are novel plasmids that are useful for transforming microorganisms to produce recombinant microorganisms that express enzymes such as Zwf.

  4. 27 CFR 6.56 - Renting display space.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Renting display space. 6.56 Section 6.56 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU... Distribution Service § 6.56 Renting display space. A promotion whereby an industry member rents display...

  5. 27 CFR 6.35 - Renting display space.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Renting display space. 6.35 Section 6.35 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU... Renting display space. The renting of display space by an industry member at a retail...

  6. Computerized measurement of mammographic display image quality

    Science.gov (United States)

    Chakraborty, Dev P.; Sivarudrappa, Mahesh; Roehrig, Hans

    1999-05-01

    Since the video monitor is widely believed to be the weak link in the imaging chain, it is critical, to include it in the total image quality evaluation. Yet, most physical measurements of mammographic image quality are presently limited to making measurements on the digital matrix, not the displayed image. A method is described to quantitatively measure image quality of mammographic monitors using ACR phantom-based test patterns. The image of the test pattern is digitized using a charge coupled device (CCD) camera, and the resulting image file is analyzed by an existing phantom analysis method (Computer Analysis of Mammography Phantom Images, CAMPI). The new method is called CCD-CAMPI and it yields the Signal-to-Noise-Ratio (SNR) for an arbitrary target shape (e.g., speck, mass or fiber). In this work we show the feasibility of this idea for speck targets. Also performed were physical image quality characterization of the monitor (so-called Fourier measures) and analysis by another template matching method due to Tapiovaara and Wagner (TW) which is closely related to CAMPI. The methods were applied to a MegaScan monitor. Test patterns containing a complete speck group superposed on a noiseless background were displayed on the monitor and a series of CCD images were acquired. These images were subjected to CCD-CAMPI and TW analyses. It was found that the SNR values for the CCD-CAMPI method tracked those of the TW method, although the latter measurements were considerably less precise. The TW SNR measure was also about 25% larger than the CCD-CAMPI determination. These differences could be understood from the manner in which the two methods evaluate the noise. Overall accuracy of the CAMPI SNR determination was 4.1% for single images when expressed as a coefficient of variance. While the SNR measures are predictable from the Fourier measures the number of images and effort required is prohibitive and it is not suited to Quality Control (QC). Unlike the Fourier

  7. Microbial surface displaying formate dehydrogenase and its application in optical detection of formate.

    Science.gov (United States)

    Liu, Aihua; Feng, Ruirui; Liang, Bo

    2016-09-01

    In the present work, NAD(+)-dependent formate dehydrogenase (FDH), encoded by fdh gene from Candida boidinii was successfully displayed on Escherichia coli cell surface using ice nucleation protein (INP) from Pseudomonas borealis DL7 as an anchoring protein. Localization of matlose binding protein (MBP)-INP-FDH fusion protein on the E. coli cell surface was characterized by SDS-PAGE and enzymatic activity assay. FDH activity was monitored through the oxidation of formate catalyzed by cell-surface-displayed FDH with its cofactor NAD(+), and the production of NADH can be detected spectrometrically at 340nm. After induction for 24h in Luria-Bertani medium containing isopropyl-β-d-thiogalactopyranoside, over 80% of MBP-INP-FDH fusion protein present on the surface of E. coli cells. The cell-surface-displayed FDH showed optimal temperature of 50°C and optimal pH of 9.0. Additionally, the cell-surface-displayed FDH retained its original enzymatic activity after incubation at 4°C for one month with the half-life of 17days at 40°C and 38h at 50°C. The FDH activity could be inhibited to different extents by some transition metal ions and anions. Moreover, the E. coli cells expressing FDH showed different tolerance to solvents. The recombinant whole cell exhibited high formate specificity. Finally, the E. coli cell expressing FDH was used to assay formate with a wide linear range of 5-700μM and a low limit of detection of 2μM. It is anticipated that the genetically engineered cells may have a broad application in biosensors, biofuels and cofactor regeneration system. PMID:27444330

  8. Identification of binding peptides of the ADAM15 disintegrin domain using phage display

    Indian Academy of Sciences (India)

    Jing Wu; Min-Chen Wu; Lian-Fen Zhang; Jian-Yong Lei; Lei Feng; Jian Jin

    2009-06-01

    ADAM15 plays an important role in tumour development by interacting with integrins. In this study, we investigated the target peptides of the ADAM15 disintegrin domain. First, we successfully produced the recombinant human ADAM15 disintegrin domain (RADD) that could inhibit melanoma cell adhesion by using Escherichia coli. Second, four specific binding peptides (peptides A, B, C, and D) were selected using a phage display 12-mer peptide library. The screening protocol involved 4 rounds of positive panning on RADD and 2 rounds of subtractive selection with streptavidin. By using the BLAST software and a relevant protein database, integrin v3 was found to be homologous to peptide A. Synthetic peptide A had a highly inhibitory effect on RADD–integrin v3 binding. The results demonstrate the potential application of short peptides for disrupting high-affinity ADAM–integrin interactions.

  9. Scientific Graphical Displays on the Macintosh

    Energy Technology Data Exchange (ETDEWEB)

    Grotch, S. [Lawrence Livermore National Lab., CA (United States)

    1994-11-15

    In many organizations scientists have ready access to more than one computer, often both a workstation (e.g., SUN, HP, SGI) as well as a Macintosh or other PC. The scientist commonly uses the work station for `number-crunching` and data analysis whereas the Macintosh is relegated to either word processing or serves as a `dumb terminal` to a larger main-frame computer. In an informal poll of my colleagues, very few of them used their Macintoshes for either statistical analysis or for graphical data display. I believe that this state of affairs is particularly unfortunate because over the last few years both the computational capability, and even more so, the software availability for the Macintosh have become quite formidable. In some instances, very powerful tools are now available on the Macintosh that may not exist (or be far too costly) on the so-called `high end` workstations. Many scientists are simply unaware of the wealth of extremely useful, `off-the-shelf` software that already exists on the Macintosh for scientific graphical and statistical analysis.

  10. Phenols displaying tyrosinase inhibition from Humulus lupulus.

    Science.gov (United States)

    Kim, Dae Wook; Woo, Hyun Sim; Kim, Jeong Yoon; Ryuk, Jin Ah; Park, Ki Hun; Ko, Byoung Seob

    2016-10-01

    Tyrosinase is the rate-limiting enzyme for the production of melanin and other pigments via the oxidation of l-tyrosine. The methanol extract from Humulus lupulus showed potent inhibition against mushroom tyrosinase. The bioactivity-guided fractionation of this methanol extract resulted in the isolation of seven flavonoids (1-7), identified as xanthohumol (1), 4'-O-methylxanthohumol (2), xanthohumol C (3), flavokawain C (4), xanthoumol B (5), 6-prenylnaringenin (6) and isoxanthohumol (7). All isolated flavonoids (1-7) effectively inhibited the monophenolase (IC50s = 15.4-58.4 µM) and diphenolase (IC50s = 27.1-117.4 µM) activities of tyrosinase. Kinetic studies using Lineweaver-Burk and Dixon-plots revealed that chalcones (1-5) were competitive inhibitors, whereas flavanones (6 and 7) exhibited both mixed and non-competitive inhibitory characteristics. In conclusion, this study is the first to demonstrate that the phenolic phytochemicals of H. lupulus display potent inhibitory activities against tyrosinase. PMID:26162028

  11. Studies on Relevance, Ranking and Results Display

    CERN Document Server

    Gelernter, Judith; Carbonell, Jaime

    2010-01-01

    This study considers the extent to which users with the same query agree as to what is relevant, and how what is considered relevant may translate into a retrieval algorithm and results display. To combine user perceptions of relevance with algorithm rank and to present results, we created a prototype digital library of scholarly literature. We confine studies to one population of scientists (paleontologists), one domain of scholarly scientific articles (paleo-related), and a prototype system (PaleoLit) that we built for the purpose. Based on the principle that users do not pre-suppose answers to a given query but that they will recognize what they want when they see it, our system uses a rules-based algorithm to cluster results into fuzzy categories with three relevance levels. Our system matches at least 1/3 of our participants' relevancy ratings 87% of the time. Our subsequent usability study found that participants trusted our uncertainty labels but did not value our color-coded horizontal results layout ...

  12. Plastic substrate technologies for flexible displays

    Science.gov (United States)

    Hanada, Toru; Shiroishi, Isao; Negishi, Tuyoto; Shiro, Takashi

    2010-02-01

    A novel plastic substrate for flexible displays was developed. The substrate consisted of a polycarbonate (PC) base film coated with a gas barrier layer and a transparent conductive thin film. PC with ultra-low intrinsic birefringence and high temperature dimensional stability was developed for the base film. The retardation of the PC base film was less than 1 nm at a wavelength of 550 nm (film thickness, 120 μm). Even at 180 °C, the elastic modulus was 2 GPa, and thermal shrinkage was less than 0.01%. The surface roughness of the PC base film was less than 0.5 nm. A silicon oxide (SiOx) gas barrier layer was deposited on the PC base film by a DC magnetron reactive sputtering method. In addition, a unique organic-inorganic hybrid material is coated on the SiOx to further improve the gas-barrier performance. The water vapor transmission rate of the film was less than 0.05 g/m2/day at 40 °C and 100% relative humidity (RH), and the permeation of oxygen was less than 0.05 cc/m2•day•atm at 40 °C and 90% RH. Indium Zinc Oxide optimized for the plastic substrate was deposited on the other side of the SiOx film by the DC magnetron sputtering method. The transmittance was 87% and the resistivity was 3.5×10-4 ohm•cm.

  13. Visual display terminals and workers' health

    International Nuclear Information System (INIS)

    A World Health Organization Working Group on Aspects of Occupational Health in the Use of Visual Display Terminals (VDTs) studied in December 1985 the considerable literature available from research that is pertinent to the health implications of work on VDTs. On the basis of these considerations the working group: 1) Concluded that visual system discomfort was a common problem when working with VDTs. However, there was no evidence of damage or permanent impairment to the visual system of the persons. 2) Recognized that musculoskeletal discomfort was commonplace during work with VDTs. 3) Recognized that stress factors and stress-related disorders have been repeatedly discussed in relation to work with VDTs. 4) Indications of certain skin disorders among operators of VDTs have occurred in some countries. The amount of scientific data on this point is still rather limited. 5) Recent studies were examined and the group concluded that those studies provide no evidence of a link between adverse effects on pregnancy and the use of VDTs. This should not be interpreted, however, to mean that working on VDTs is absolutely safe. Refs, figs and tabs

  14. Projection display technologies for the new millennium

    Science.gov (United States)

    Kahn, Frederic J.

    2000-04-01

    Although analog CRTs continue to enable most of the world's electronic projection displays such as US consumer rear projection televisions, discrete pixel (digital) active matrix LCD and DLP reflective mirror array projectors have rapidly created large nonconsumer markets--primarily for business. Recent advances in image quality, compactness and cost effectiveness of digital projectors have the potential to revolutionize major consumer and entertainment markets as well. Digital penetration of the mainstream consumer projection TV market will begin in the hear 2000. By 2005 digital projection HDTVs could take the major share of the consumer HDTV projection market. Digital projection is expected to dominate both the consumer HDTV and the cinema market by 2010, resulting in potential shipments for all projection markets exceeding 10 M units per year. Digital projection is improving at a rate 10X faster than analog CRT projectors and 5X faster than PDP flat panels. Continued rapid improvement of digital projection is expected due to its relative immaturity and due to the wide diversity of technological improvements being pursued. Key technology enablers are the imaging panels, light sources and micro-optics. Market shares of single panel projectors, MEMs panels, LCOS panels and low T p-Si TFT LCD panel variants are expected to increase.

  15. New Media Display Technology and Exhibition Experience

    Directory of Open Access Journals (Sweden)

    Chen-Wo Kuo

    2016-01-01

    Full Text Available As the inheritor of Chinese civilization, the National Palace Museum (hereafter referred to as the NPM, houses a world-class collection of cultural art and artifacts. Since the NPM began promoting the National Digital Archives Project in 2002, its efforts have expanded to develop a digital museum and various e-learning programs. Extending the use of digital archives to its educational and cultural industrial endeavors, the NPM has maximized the value of its exhibitions, publications, and educational programs.  In 2013, the NPM integrated creative thinking and interdisciplinary technologies, such as floating projection, augmented reality, and other sensory interactive media, to recreate the historical circumstance of 19th century East Asian maritime cultures in “Rebuilding the Tong-an Ships—New Media Art Exhibition," which opened at Huashan 1914 Creative Park and later won the Gold Award at the 2014 Digital Education Innovation Competition. Through a thorough exploration of the factors contributing to the success of "Rebuilding the Tong-an Ships," this study has isolated the two main factors of the exhibition’s popularity, namely, the compactness of the metadata and the atmosphere created by the interactive display technology.

  16. 3D electrohydrodynamic simulation of electrowetting displays

    International Nuclear Information System (INIS)

    The fluid dynamic behavior within a pixel of an electrowetting display (EWD) is thoroughly investigated through a 3D simulation. By coupling the electrohydrodynamic (EHD) force deduced from the Maxwell stress tensor with the laminar phase field of the oil–water dual phase, the complete switch processes of an EWD, including the break-up and the electrowetting stages in the switch-on process (with voltage) and the oil spreading in the switch-off process (without voltage), are successfully simulated. By considering the factor of the change in the apparent contact angle at the contact line, the electro–optic performance obtained from the simulation is found to agree well with its corresponding experiment. The proposed model is used to parametrically predict the effect of interfacial (e.g. contact angle of grid) and geometric (e.g. oil thickness and pixel size) properties on the defects of an EWD, such as oil dewetting patterns, oil overflow, and oil non-recovery. With the help of the defect analysis, a highly stable EWD is both experimentally realized and numerically analyzed. (paper)

  17. Vision based flight procedure stereo display system

    Science.gov (United States)

    Shen, Xiaoyun; Wan, Di; Ma, Lan; He, Yuncheng

    2008-03-01

    A virtual reality flight procedure vision system is introduced in this paper. The digital flight map database is established based on the Geographic Information System (GIS) and high definitions satellite remote sensing photos. The flight approaching area database is established through computer 3D modeling system and GIS. The area texture is generated from the remote sensing photos and aerial photographs in various level of detail. According to the flight approaching procedure, the flight navigation information is linked to the database. The flight approaching area vision can be dynamic displayed according to the designed flight procedure. The flight approaching area images are rendered in 2 channels, one for left eye images and the others for right eye images. Through the polarized stereoscopic projection system, the pilots and aircrew can get the vivid 3D vision of the flight destination approaching area. Take the use of this system in pilots preflight preparation procedure, the aircrew can get more vivid information along the flight destination approaching area. This system can improve the aviator's self-confidence before he carries out the flight mission, accordingly, the flight safety is improved. This system is also useful in validate the visual flight procedure design, and it helps to the flight procedure design.

  18. Little Artists put on a Big Display

    CERN Multimedia

    2001-01-01

    It has become a regular appointment for CERN people: the exhibition of naive and beautiful works made by young artists from the CERN nursery school. Physicists? Pianists? Teachers? They still don't know what they will be... some of them can hardly speak. But one thing's for sure CERN gives them the chance to discover and express their artistic aptitudes. And once a year they can proudly show their works to all CERN people. We are talking about children from le nursery school run by the CERN Staff Association, who are the creators of amazing works currently on display in the Main Building. To prepare for this very important appointment each class of young artists from 2 to 6 years old, have been hard at work for several months. Des élèves du Jardin d'enfants de 5 ans devant l'une de leurs oeuvres, un dinosaure en carton. Working together to express themselves in creative activities, such as drawing, pottery, music, musical movement, games, arts, and craftwork, children from all over the...

  19. Designing low cost LED display for the billboard

    Science.gov (United States)

    Hong, Yi-Jian; Uang, Chii-Maw; Wang, Ping-Chieh; Ho, Zu-Sheng

    2011-10-01

    With quickly advance of the computer, microelectronics and photonics technologies, LED display panel becomes a new electronic advertising media. It can be used to show any information whatever characters or graphics. Most LED display panels are built of many Light-Emitting Diodes arranged in a matrix form. The display has many advantages such as low power, low cost, long life and high definition. Because the display panel is asked to show rich color, the LED display panel's driving system becomes very complex. The design methodology of LED display panel's driver becomes more and more important to meet the market requirements. Cost is always the most important issue in public market domain. In this paper, we report a design methodology of LED display panel's driver based on the microprocessor control unit (MCU) system and LED display controller IC, HT1632C, to control three colors, RGB, color LED display panel and the modular panel size is 24*16 in matrix form. The HT1632C is a memory mapping LED display controller, it can be used on many applications, such as digital clock, thermometer, counter, voltmeter or other instrumentation readouts. Three pieces of HT1632C are used to drive a 24*16 RGB LED display panel, in our design case. Each HT163C chip is used to control one of the R, G and B color. As the drive mode is driven in DC mode, the RGB display panel can create and totally of seven colors under the control of MCU. The MCU generates the control signal to drive HT1632C. In this study, the software design methodology is adopted with dynamic display principle. When the scan frequency is 60Hz, LED display panel will get the clear picture and be able to display seven colors.

  20. Radiative recombination of excitons in amorphous semiconductors

    International Nuclear Information System (INIS)

    A theory for calculating the radiative lifetime of excitons in amorphous semiconductors is presented. Four possibilities of excitonic radiative recombination are considered and the corresponding rates are derived at thermal equilibrium. The radiative lifetime is calculated from the inverse of the maximum rate for all the four possibilities. Results agree very well with experiments

  1. Genetic Recombination as a Chemical Reaction Network

    OpenAIRE

    Müller, Stefan; Hofbauer, Josef

    2015-01-01

    The process of genetic recombination can be seen as a chemical reaction network with mass-action kinetics. We review the known results on existence, uniqueness, and global stability of an equilibrium in every compatibility class and for all rate constants, from both the population genetics and the reaction networks point of view.

  2. Science: The Recombinant DNA Advisory Committee.

    Science.gov (United States)

    Wright, Susan

    1979-01-01

    Reports on the status of the Recombinant DNA Advisory Committee (RAC) and attempts to rationalize Suburban Highway Policy. Effective communication among members of the RAC is a current problem facing the committee. A federal transportation priority spending policy is suggested during these times of money and fuel shortages. (MA)

  3. Recombinant Bovine Growth Hormone Criticism Grows.

    Science.gov (United States)

    Gaard, Greta

    1995-01-01

    Discusses concerns related to the use of recombinant bovine growth hormone in the United States and other countries. Analyses the issue from the perspectives of animal rights, human health, world hunger, concerns of small and organic farmers, costs to the taxpayer, and environmental questions. A sidebar discusses Canadian review of the hormone.…

  4. Vaccine development using recombinant DNA technology

    Science.gov (United States)

    Vaccines induce an immune response in the host that subsequently recognizes infectious agents and helps fight off the disease; vaccines must do this without causing the disease. This paper reviews the development of recombinant DNA technologies as a means of providing new ways for attenuating diseas...

  5. Selected techniques in recombinant DNA technology

    International Nuclear Information System (INIS)

    Recombined DNA technology comprises a complex of techniques in the fields of nucleic acid biochemistry and molecular biology. This presentation gives an introduction, a brief description and example of the procedures of some of the basic techniques in the DNA cloning work currently used. 8 refs

  6. Recombinant DNA: Scientific and Social Perspectives.

    Science.gov (United States)

    Vandegrift, Vaughn

    1979-01-01

    This article is designed to inform chemical educators not engaged in this technology as to the nature and methods used in the technology, the reasons for scientific and social concern, and the attempts made to assuage concerns involving recombinant DNA research. (author/BB)

  7. Production and delivery of recombinant subunit vaccines

    OpenAIRE

    Andersson, Christin

    2000-01-01

    Recombinant strategies are today dominating in thedevelopment of modern subunit vaccines. This thesis describesstrategies for the production and recovery of protein subunitimmunogens, and how genetic design of the expression vectorscan be used to adapt the immunogens for incorporation intoadjuvant systems. In addition, different strategies fordelivery of subunit vaccines by RNA or DNA immunization havebeen investigated. Attempts to create general production strategies forrecombinant protein i...

  8. Asthma and Therapeutics: Recombinant Therapies in Asthma

    Directory of Open Access Journals (Sweden)

    Cockcroft Donald W

    2005-03-01

    Full Text Available Abstract Numerous recombinant therapies are being investigated for the treatment of asthma. This report reviews the current status of several of these novel agents. Anti-immunoglobulin (IgE (omalizumab, Xolair markedly inhibits all aspects of the allergen challenge in subjects who have reduction of free serum IgE to undetectable levels. Several clinical studies in atopic asthma have demonstrated benefit by improved symptoms and lung function and a reduction in corticosteroid requirements. Early use in atopic asthmatics may be even more effective. Several approaches target interleukin (IL-4. Soluble IL-4 receptor has been shown to effectively replace inhaled corticosteroid; further studies are under way. Recombinant anti-IL-5 and recombinant IL-12 inhibit blood and sputum eosinophils and allergen-induced eosinophilia without any effect on airway responsiveness, allergen-induced airway responses, or allergen-induced airway hyperresponsiveness. Efalizumab, a recombinant antibody that inhibits lymphocyte trafficking, is effective in psoriasis. A bronchoprovocation study showed a reduction in allergen-induced late asthmatic response and allergen-induced eosinophilia, which suggests that it should be effective in clinical asthma. These exciting novel therapies provide not only promise of new therapies for asthma but also valuable tools for investigation of asthma mechanisms.

  9. Catalytic hydrogen recombination for nuclear containments

    International Nuclear Information System (INIS)

    Catalytic recombiners appear to be a credible option for hydrogen mitigation in nuclear containments. The passive operation, versatility and ease of back fitting are appealing for existing stations and new designs. Recently, a generation of wet-proofed catalyst materials have been developed at AECL which are highly specific to H2-O2, are active at ambient temperatures and are being evaluated for containment applications. Two types of catalytic recombiners were evaluated for hydrogen removal in containments based on the AECL catalyst. The first is a catalytic combustor for application in existing air streams such as provided by fans or ventilation systems. The second is an autocatalytic recombiner which uses the enthalpy of reaction to produce natural convective flow over the catalyst elements. Intermediate-scale results obtained in 6 m3 and 10 m3 spherical and cylindrical vessels are given to demonstrate self-starting limits, operating limits, removal capacity, scaling parameters, flow resistance, mixing behaviour in the vicinity of an operating recombiner and sensitivity to poisoning, fouling and radiation. (author). 13 refs., 10 figs

  10. Recombinant protein blends: silk beyond natural design.

    Science.gov (United States)

    Dinjaski, Nina; Kaplan, David L

    2016-06-01

    Recombinant DNA technology and new material concepts are shaping future directions in biomaterial science for the design and production of the next-generation biomaterial platforms. Aside from conventionally used synthetic polymers, numerous natural biopolymers (e.g., silk, elastin, collagen, gelatin, alginate, cellulose, keratin, chitin, polyhydroxyalkanoates) have been investigated for properties and manipulation via bioengineering. Genetic engineering provides a path to increase structural and functional complexity of these biopolymers, and thereby expand the catalog of available biomaterials beyond that which exists in nature. In addition, the integration of experimental approaches with computational modeling to analyze sequence-structure-function relationships is starting to have an impact in the field by establishing predictive frameworks for determining material properties. Herein, we review advances in recombinant DNA-mediated protein production and functionalization approaches, with a focus on hybrids or combinations of proteins; recombinant protein blends or 'recombinamers'. We highlight the potential biomedical applications of fibrous protein recombinamers, such as Silk-Elastin Like Polypeptides (SELPs) and Silk-Bacterial Collagens (SBCs). We also discuss the possibility for the rationale design of fibrous proteins to build smart, stimuli-responsive biomaterials for diverse applications. We underline current limitations with production systems for these proteins and discuss the main trends in systems/synthetic biology that may improve recombinant fibrous protein design and production. PMID:26686863

  11. Algae-based oral recombinant vaccines

    Directory of Open Access Journals (Sweden)

    Elizabeth A Specht

    2014-02-01

    Full Text Available Recombinant subunit vaccines are some of the safest and most effective vaccines available, but their high cost and the requirement of advanced medical infrastructure for administration make them impractical for many developing world diseases. Plant-based vaccines have shifted that paradigm by paving the way for recombinant vaccine production at agricultural scale using an edible host. However, enthusiasm for molecular pharming in food crops has waned in the last decade due to difficulty in developing transgenic crop plants and concerns of contaminating the food supply. Microalgae are poised to become the next candidate in recombinant subunit vaccine production, and they present several advantages over terrestrial crop plant-based platforms including scalable and contained growth, rapid transformation, easily obtained stable cell lines, and consistent transgene expression levels. Algae have been shown to accumulate and properly fold several vaccine antigens, and efforts are underway to create recombinant algal fusion proteins that can enhance antigenicity for effective orally-delivered vaccines. These approaches have the potential to revolutionize the way subunit vaccines are made and delivered – from costly parenteral administration of purified protein, to an inexpensive oral algae tablet with effective mucosal and system immune reactivity.

  12. Recombination times in germanium under high pressure

    International Nuclear Information System (INIS)

    The influence of pressure on a well defined recombination process was studied. The centres were introduced by γirradiation and the lifetime determined by the decay time of photoconductivity. An optical pressure vessel is described which allows for a hydrostatic variation of 3000 bars. The diffusion constant and lifetime measurements are presented and analysed. (V.J.C.)

  13. Illumination, color and imaging evaluation and optimization of visual displays

    CERN Document Server

    Bodrogi , P

    2012-01-01

    This comprehensive and modern reference on display technology, Illumination, color and imaging focuses on visual effects and how displayed images are best matched to the human visual system. It teaches how to exploit the knowledge of color information processing to design usable, ergonomic, and visually pleasing displays and display environments. The contents describe design principles and methods to optimize self-luminous visual technologies for the user using modern still and motion image displays and the whole range of indoor light sources. Design principles and methods are derived from

  14. Achieving consistent color and grayscale presentation on medial color displays

    Science.gov (United States)

    Fan, Jiahua; Roehrig, Hans; Dallas, William; Krupinski, Elizabeth A.

    2008-03-01

    Color displays are increasingly used for medical imaging, replacing the traditional monochrome displays in radiology for multi-modality applications, 3D representation applications, etc. Color displays are also used increasingly because of wide spread application of Tele-Medicine, Tele-Dermatology and Digital Pathology. At this time, there is no concerted effort for calibration procedures for this diverse range of color displays in Telemedicine and in other areas of the medical field. Using a colorimeter to measure the display luminance and chrominance properties as well as some processing software we developed a first attempt to a color calibration protocol for the medical imaging field.

  15. Identification of Late Embryogenesis Abundant (LEA Protein Putative Interactors Using Phage Display

    Directory of Open Access Journals (Sweden)

    Allan Bruce Downie

    2012-05-01

    Full Text Available Arabidopsis thaliana seeds without functional SEED MATURATION PROTEIN1 (SMP1, a boiling soluble protein predicted to be of intrinsic disorder, presumed to be a LATE EMBRYOGENESIS ABUNDANT (LEA family protein based on sequence homology, do not enter secondary dormancy after 3 days at 40 °C. We hypothesized that SMP1 may protect a heat labile protein involved in the promotion of secondary dormancy. Recombinant SMP1 and GmPM28, its soybean (Glycine max, LEA4 homologue, protected the labile GLUCOSE-6-PHOSPHATE DEHYROGENASE enzyme from heat stress, as did a known protectant, Bovine Serum Albumin, whether the LEA protein was in solution or attached to the bottom of microtiter plates. Maintenance of a biological function for both recombinant LEA proteins when immobilized encouraged a biopanning approach to screen for potential protein interactors. Phage display with two Arabidopsis seed, T7 phage, cDNA libraries, normalized for transcripts present in the mature, dehydrated, 12-, 24-, or 36-h imbibed seeds, were used in biopans against recombinant SMP1 and GmPM28. Phage titer increased considerably over four rounds of biopanning for both LEA proteins, but not for BSA, at both 25 and at 41 °C, regardless of the library used. The prevalence of multiple, independent clones encoding portions of specific proteins repeatedly retrieved from different libraries, temperatures and baits, provides evidence suggesting these LEA proteins are discriminating which proteins they protect, a novel finding. The identification of putative LEA-interacting proteins provides targets for reverse genetic approaches to further dissect the induction of secondary dormancy in seeds in response to heat stress.

  16. Studies on Mucosal Immunity Induced by Transmissible Gastroenteritis Virus Nucleocapsid Protein Recombinant Lactobacillus casei in Mice and Sow

    Institute of Scientific and Technical Information of China (English)

    WANG Gui-hua; HOU Xi-lin; YU Li-yun; LIU Jian-kui; WEI Chun-hua

    2009-01-01

    Mucosal immunity plays an important role in protecting pigs against transmissible gastroenteritis virus (TGEV) infection. To elicit mucosal immune response against TGEV, we developed a surface antigen display system using the poly-γ-glutamate synthetase A (pgsA) protein of Bacillus subtilis as an anchoring matrix to express recombinant fusion proteins of pgsA and nucleocapsid protein of TGEV in Lactobacillus casei. Surface location of fusion protein was verified by ELISA and indirect immunofluorescence test. Oral and intranasal inoculations of pregnant sow and mice with recombinant L. casei resulted in high levels of serum immunoglobulin G (IgG) and secretory immunogiobulin A (sIgA) against recombinant N protein as demonstrated by ELISA. More importantly, the level of specific slgA in colostrum significantly increased compared with that of IgG. The serum lgG levels of the piglets increased after suckling coiostrum produced by sows was previously inoculated with recombinant L. casei. These results indicate that immunization with recombinant L. casei expressing TGEV N protein on its surface elicited high levels of specific slgA and circulating lgG against TGEV N protein.

  17. Combining phage display with de novo protein sequencing for reverse engineering of monoclonal antibodies.

    Science.gov (United States)

    Rickert, Keith W; Grinberg, Luba; Woods, Robert M; Wilson, Susan; Bowen, Michael A; Baca, Manuel

    2016-04-01

    The enormous diversity created by gene recombination and somatic hypermutation makes de novo protein sequencing of monoclonal antibodies a uniquely challenging problem. Modern mass spectrometry-based sequencing will rarely, if ever, provide a single unambiguous sequence for the variable domains. A more likely outcome is computation of an ensemble of highly similar sequences that can satisfy the experimental data. This outcome can result in the need for empirical testing of many candidate sequences, sometimes iteratively, to identity one which can replicate the activity of the parental antibody. Here we describe an improved approach to antibody protein sequencing by using phage display technology to generate a combinatorial library of sequences that satisfy the mass spectrometry data, and selecting for functional candidates that bind antigen. This approach was used to reverse engineer 2 commercially-obtained monoclonal antibodies against murine CD137. Proteomic data enabled us to assign the majority of the variable domain sequences, with the exception of 3-5% of the sequence located within or adjacent to complementarity-determining regions. To efficiently resolve the sequence in these regions, small phage-displayed libraries were generated and subjected to antigen binding selection. Following enrichment of antigen-binding clones, 2 clones were selected for each antibody and recombinantly expressed as antigen-binding fragments (Fabs). In both cases, the reverse-engineered Fabs exhibited identical antigen binding affinity, within error, as Fabs produced from the commercial IgGs. This combination of proteomic and protein engineering techniques provides a useful approach to simplifying the technically challenging process of reverse engineering monoclonal antibodies from protein material. PMID:26852694

  18. Experimental Mg IX photo recombination rate coefficient

    International Nuclear Information System (INIS)

    The rate coefficient for radiative and dielectronic recombination of beryllium-like magnesium ions was measured with high resolution at the Heidelberg heavy-ion storage ring TSR. In the electron-ion collision energy range 0-207 eV resonances due to 2s → 2p (ΔN = 0) and 2s → 3l (ΔN = 1) core excitations were detected. At low energies below 0.15 eV the recombination rate coefficient is dominated by strong 1s2(2s2p 3P)7l resonances with the strongest one occurring at an energy of only 21 meV. These resonances decisively influence the Mg IX recombination rate coefficient in a low temperature plasma. The experimentally derived Mg IX dielectronic recombination rate coefficient (±15% systematical uncertainty) is compared with the recommendation by Mazzotta et al. (1998, AandAS, 133, 403) and the recent calculations by Gu (2003, ApJ, 590, 1131) and by Colgan et al. (2003, AandA, 412, 597). These results deviate from the experimental rate coefficient by 130%, 82% and 25%, respectively, at the temperature where the fractional abundance of Mg IX is expected to peak in a photoionized plasma. At this temperature a theoretical uncertainty in the 1s2(2s2p 3P)7l resonance positions of only 100 meV would translate into an uncertainty of the plasma rate coefficient of almost a factor 3. This finding emphasizes that an accurate theoretical calculation of the Mg IX recombination rate coefficient from first principles is challenging. (authors)

  19. A molecular recombination map of Antirrhinum majus

    Directory of Open Access Journals (Sweden)

    Hudson Andrew

    2010-12-01

    Full Text Available Abstract Background Genetic recombination maps provide important frameworks for comparative genomics, identifying gene functions, assembling genome sequences and for breeding. The molecular recombination map currently available for the model eudicot Antirrhinum majus is the result of a cross with Antirrhinum molle, limiting its usefulness within A. majus. Results We created a molecular linkage map of A. majus based on segregation of markers in the F2 population of two inbred lab strains of A. majus. The resulting map consisted of over 300 markers in eight linkage groups, which could be aligned with a classical recombination map and the A. majus karyotype. The distribution of recombination frequencies and distorted transmission of parental alleles differed from those of a previous inter-species hybrid. The differences varied in magnitude and direction between chromosomes, suggesting that they had multiple causes. The map, which covered an estimated of 95% of the genome with an average interval of 2 cM, was used to analyze the distribution of a newly discovered family of MITE transposons and tested for its utility in positioning seven mutations that affect aspects of plant size. Conclusions The current map has an estimated interval of 1.28 Mb between markers. It shows a lower level of transmission ratio distortion and a longer length than the previous inter-species map, making it potentially more useful. The molecular recombination map further indicates that the IDLE MITE transposons are distributed throughout the genome and are relatively stable. The map proved effective in mapping classical morphological mutations of A. majus.

  20. Extrachromosomal recombination substrates recapitulate beyond 12/23 restricted VDJ recombination in nonlymphoid cells.

    Science.gov (United States)

    Jung, David; Bassing, Craig H; Fugmann, Sebastian D; Cheng, Hwei-Ling; Schatz, David G; Alt, Frederick W

    2003-01-01

    V(D)J recombination occurs efficiently only between gene segments flanked by recombination signals (RSs) containing 12 and 23 base pair spacers (the 12/23 rule). A further limitation "beyond the 12/23 rule" (B12/23) exists at the TCRbeta locus and ensures Dbeta usage. Herein, we show that extrachromosomal V(D)J recombination substrates recapitulate B12/23 restriction in nonlymphoid cells. We further demonstrate that the Vbeta coding flank, the 12-RS heptamer/nonamer, and the 23-RS spacer each can significantly influence B12/23 restriction. Finally, purified core RAG1 and RAG2 proteins (together with HMG2) also reproduce B12/23 restriction in a cell-free system. Our findings indicate that B12/23 restriction of V(D)J recombination is cemented at the level of interactions between the RAG proteins and TCRbeta RS sequences. PMID:12530976