WorldWideScience

Sample records for blue grafted polyurethane

  1. A multilayered polyurethane foam technique for skin graft immobilization.

    Science.gov (United States)

    Nakamura, Motoki; Ito, Erika; Kato, Hiroshi; Watanabe, Shoichi; Morita, Akimichi

    2012-02-01

    Several techniques are applicable for skin graft immobilization. Although the sponge dressing is a popular technique, pressure failure near the center of the graft is a weakness of the technique that can result in engraftment failure. To evaluate the efficacy of a new skin graft immobilization technique using multilayered polyurethane foam in vivo and in vitro. Twenty-six patients underwent a full-thickness skin graft. Multiple layers of a hydrocellular polyurethane foam dressing were used for skin graft immobilization. In addition, we created an in vitro skin graft model that allowed us to estimate immobilization pressure at the center and edges of skin grafts of various sizes. Overall mean graft survival was 88.9%. In the head and neck region (19 patients), mean graft survival was 93.6%. Based on the in vitro outcomes, this technique supplies effective pressure (polyurethane foam dressing is simple, safe, and effective for skin graft immobilization. © 2011 by the American Society for Dermatologic Surgery, Inc. Published by Wiley Periodicals, Inc.

  2. Compliance Study of Endovascular Stent Grafts Incorporated with Polyester and Polyurethane Graft Materials in both Stented and Unstented Zones

    Directory of Open Access Journals (Sweden)

    Ying Guan

    2016-08-01

    Full Text Available Compliance mismatch between stent graft and host artery may induce complications and blood flow disorders. However, few studies have been reported on stent graft compliance. This study aims to explore the deformation and compliance of stent graft in stented and unstented zones under three pressure ranges. Compliance of two stent grafts incorporated with polyurethane graft (nitinol-PU and polyester graft (nitinol-PET materials respectively were tested; the stents used in the two stent grafts were identical. For the circumferential deformation of the stent grafts under each pressure range, the nitinol-PET stent graft was uniform in both zones. The nitinol-PU stent graft was circumferentially uniform in the stented zone, however, it was nonuniform in the unstented zone. The compliance of the PU graft material was 15 times higher than that of the PET graft. No significant difference in compliance was observed between stented and unstented zones of the nitinol-PET stent graft regardless of the applied pressure range. However, for the nitinol-PU stent graft, compliance of the unstented PU region was approximately twice that of the stented region; thus, compliance along the length of the nitinol-PU stent graft was not constant and different from that of the nitinol-PET stent graft.

  3. The in vivo performance of small-caliber nanofibrous polyurethane vascular grafts

    Directory of Open Access Journals (Sweden)

    Hu Zuo-jun

    2012-12-01

    Full Text Available Abstract Background In a previous in vitro study, we confirmed that small-caliber nanofibrous polyurethane (PU vascular grafts have favorable mechanical properties and biocompatibility. In the present study, we examined the in vivo biocompatibility and stability of these grafts. Methods Forty-eight adult male beagle dogs were randomly divided into two groups receiving, respectively, polyurethane (PU or polytetrafluoroethylene (PTFE grafts (n = 24 animals / group. Each group was studied at 4, 8, 12, and 24 weeks after graft implantation. Blood flow was analyzed by color Doppler ultrasound and computed tomography angiography. Patency rates were judged by animal survival rates. Coverage with endothelial and smooth muscle cells was characterized by hematoxylin-eosin and immunohistological staining, and scanning electron microscopy (SEM. Results Patency rates were significantly higher in the PU group (p = 0.02 vs. PTFE group. During the first 8 weeks, endothelial cells gradually formed a continuous layer on the internal surface of PU grafts, whereas coverage of PTFE graft by endothelial cells was inhomogeneous. After 12 weeks, neointimal thickness remained constant in the PU group, while PTFE group showed neointimal hyperplasia. At 24 weeks, some anastomotic sites of PTFE grafts became stenotic (p = 0.013 vs. PU group. Immunohistological staining revealed a continuous coverage by endothelial cells and an orderly arrangement of smooth muscle cells on PU grafts. Further, SEM showed smooth internal surfaces in PU grafts without thrombus or obvious neointimal hyperplasia. Conclusions Small-caliber nanofibrous PU vascular grafts facilitate the endothelialization process, prevent excessive neointimal hyperplasia, and improve patency rates.

  4. Preparation of High Density Polyethylene/Waste Polyurethane Blends Compatibilized with Polyethylene-Graft-Maleic Anhydride by Radiation

    OpenAIRE

    Park, Jong-Seok; Lim, Youn-Mook; Nho, Young-Chang

    2015-01-01

    Polyurethane (PU) is a very popular polymer that is used in a variety of applications due to its good mechanical, thermal, and chemical properties. However, PU recycling has received significant attention due to environmental issues. In this study, we developed a recycling method for waste PU that utilizes the radiation grafting technique. Grafting of waste PU was carried out using a radiation technique with polyethylene-graft-maleic anhydride (PE-g-MA). The PE-g-MA-grafted PU/high density ...

  5. Straightforward approach to graft bioactive polysaccharides onto polyurethane surfaces using an ionic liquid

    Energy Technology Data Exchange (ETDEWEB)

    Bigot, Sandra [Normandie Université, INSA de Rouen, CNRS UMR 6270 FR 3038, Avenue de l’université BP08, 76801 Saint-Etienne du Rouvray (France); Louarn, Guy [Institut des Matériaux Jean Rouxel (IMN), UMR 6502, CNRS-Université de Nantes, 2 rue de la Houssinière, BP 32229, 44322 Nantes (France); Kébir, Nasreddine, E-mail: nasreddine.kebir@insa-rouen.fr [Normandie Université, INSA de Rouen, CNRS UMR 6270 FR 3038, Avenue de l’université BP08, 76801 Saint-Etienne du Rouvray (France); Burel, Fabrice [Normandie Université, INSA de Rouen, CNRS UMR 6270 FR 3038, Avenue de l’université BP08, 76801 Saint-Etienne du Rouvray (France)

    2014-09-30

    Graphical abstract: - Highlights: • Development of a facile chemical process for PU surface derivatization. • Direct grafting of seaweed polysaccharides onto isothiocyanated PU surface. • Use of a selected ionic liquid as solvent and catalyst. - Abstract: Surface properties directly affect the performance of a material in a biological environment. In this study, the goal was to develop a simple procedure allowing the grafting of antibacterial polysaccharides onto biomedical grade polyurethanes (e.g. Tecothane{sup ®}). Thus, a straightforward chemical pathway involving an isothiocyanate–alcohol reaction in an ionic liquid (IL) was developed. PU isothiocyanted surfaces (PU–NCS) were first prepared by reacting p-phenylene diisothiocyanate with the surface urethane groups. Then, unmodified bioactive seaweed polysaccharides were directly grafted onto the surface, in mild conditions. The selected IL, i.e. 1-ethyl-3-methyl imidazolium phosphate, was of particular interest since this liquid worked as solvent for p-phenylene diisothiocyanate and the polysaccharides and as catalyst for the grafting reactions. Successful grafting of the different polysaccharides was attested by changes in the surface functional groups, using X-ray photoelectron spectroscopy (XPS). Atomic force microscopy (AFM) showed that polysaccharide grafting, slightly increased the surface roughness from 1.9 to more than 7 nm. Contact angle with water decreased from 88° (for native PU) to around 75° after polysaccharide grafting, attesting a more hydrophilic surface. This procedure would be transposed to the grafting onto PU surfaces of any macromolecule of interest bearing hydroxyl, thiol or amine groups.

  6. Development of Styrene-Grafted Polyurethane by Radiation-Based Techniques.

    Science.gov (United States)

    Jeong, Jin-Oh; Park, Jong-Seok; Lim, Youn-Mook

    2016-06-02

    Polyurethane (PU) is the fifth most common polymer in the general consumer market, following Polypropylene (PP), Polyethylene (PE), Polyvinyl chloride (PVC), and Polystyrene (PS), and the most common polymer for thermosetting resins. In particular, polyurethane has excellent hardness and heat resistance, is a widely used material for electronic products and automotive parts, and can be used to create products of various physical properties, including rigid and flexible foams, films, and fibers. However, the use of polar polymer polyurethane as an impact modifier of non-polar polymers is limited due to poor combustion resistance and impact resistance. In this study, we used gamma irradiation at 25 and 50 kGy to introduce the styrene of hydrophobic monomer on the polyurethane as an impact modifier of the non-polar polymer. To verify grafted styrene, we confirmed the phenyl group of styrene at 690 cm -1 by Attenuated Total Reflection Fourier Transform Infrared Spectroscopy (ATR-FTIR) and at 6.4-6.8 ppm by ¹H-Nuclear Magnetic Resonance (¹H-NMR). Scanning Electron Microscope (SEM), X-ray Photoelectron Spectroscopy (XPS), Thermogravimetric Analysis (TGA) and contact angle analysis were also used to confirm styrene introduction. This study has confirmed the possibility of applying high-functional composite through radiation-based techniques.

  7. Development of Styrene-Grafted Polyurethane by Radiation-Based Techniques

    Directory of Open Access Journals (Sweden)

    Jin-Oh Jeong

    2016-06-01

    Full Text Available Polyurethane (PU is the fifth most common polymer in the general consumer market, following Polypropylene (PP, Polyethylene (PE, Polyvinyl chloride (PVC, and Polystyrene (PS, and the most common polymer for thermosetting resins. In particular, polyurethane has excellent hardness and heat resistance, is a widely used material for electronic products and automotive parts, and can be used to create products of various physical properties, including rigid and flexible foams, films, and fibers. However, the use of polar polymer polyurethane as an impact modifier of non-polar polymers is limited due to poor combustion resistance and impact resistance. In this study, we used gamma irradiation at 25 and 50 kGy to introduce the styrene of hydrophobic monomer on the polyurethane as an impact modifier of the non-polar polymer. To verify grafted styrene, we confirmed the phenyl group of styrene at 690 cm−1 by Attenuated Total Reflection Fourier Transform Infrared Spectroscopy (ATR-FTIR and at 6.4–6.8 ppm by 1H-Nuclear Magnetic Resonance (1H-NMR. Scanning Electron Microscope (SEM, X-ray Photoelectron Spectroscopy (XPS, Thermogravimetric Analysis (TGA and contact angle analysis were also used to confirm styrene introduction. This study has confirmed the possibility of applying high-functional composite through radiation-based techniques.

  8. Simultaneous reinforcing and toughening of polyurethane via grafting on the surface of microfibrillated cellulose.

    Science.gov (United States)

    Yao, Xuelin; Qi, Xiaodong; He, Yuling; Tan, Dongsheng; Chen, Feng; Fu, Qiang

    2014-02-26

    In the present work, a series of thermoplastic polyurethane (TPU)/microfibrillated cellulose (MFC) nanocomposites were successfully synthesized via in situ polymerization. TPU was covalently grafted onto the MFC by particular association with the hard segments, as evidenced by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and thermogravimetric analysis. The adequate dispersion and network structure of MFC in the TPU matrix and the strong interfacial interaction through covalent grafting and hydrogen bonding between MFC and TPU resulted in significantly improved mechanical properties and thermostability of the prepared nanocomposites. The tensile strength and elongation-at-break of the nanocomposite containing only 1 wt % MFC were increased by 4.5-fold and 1.8-fold compared with that of neat TPU, respectively. It was also very interesting to find that the glass transition temperature (Tg) of TPU was decreased significantly with the introduction of MFC, indicating potential for low-temperature resistance applications. Most importantly, compared with TPU nanocomposites reinforced with other nanofillers, the TPU/MFC nanocomposites prepared in this work exhibited excellent transparency and higher reinforcing efficiency.

  9. Surface grafting of carboxylic groups onto thermoplastic polyurethanes to reduce cell adhesion

    Energy Technology Data Exchange (ETDEWEB)

    Alves, P., E-mail: palves@eq.uc.pt [CIEPQPF, Departamento de Engenharia Química, Universidade de Coimbra, Polo II, Pinhal de Marrocos, 3030-790 Coimbra (Portugal); Ferreira, P. [CIEPQPF, Departamento de Engenharia Química, Universidade de Coimbra, Polo II, Pinhal de Marrocos, 3030-790 Coimbra (Portugal); Kaiser, Jean-Pierre [EMPA, St. Gallen, Lerchenfeldstrasse 5, CH-9014 St. Gallen (Switzerland); Salk, Natalie [Mikrofertigung – Micro Engineering, Fraunhofer IFAM, Wiener Strasse 12, D-288359 Bremen (Germany); Bruinink, Arie [EMPA, St. Gallen, Lerchenfeldstrasse 5, CH-9014 St. Gallen (Switzerland); Sousa, Hermínio C. de; Gil, M.H. [CIEPQPF, Departamento de Engenharia Química, Universidade de Coimbra, Polo II, Pinhal de Marrocos, 3030-790 Coimbra (Portugal)

    2013-10-15

    The interaction of polymers with other materials is an important issue, being their surface properties clearly crucial. For some important polymer applications, their surfaces have to be modified. Surface modification aims to tailor the surface characteristics of a material for a specific application without affecting its bulk properties. Materials can be surface modified by using biological, chemical or physical methods. The aim of this work was to improve the reactivity of the thermoplastic polyurethane (TPU) material (Elastollan{sup ®}) surface and to make its surface cell repellent by grafting carboxylic groups onto its surface. Two TPU materials were studied: a polyether-based TPU and a polyester-based TPU. The grafting efficiency was evaluated by contact angle measurements and by analytical determination of the COOH groups. Scanning electron microscopy (SEM) of the membranes surface was performed as well as cell adhesion tests. It was proved that the surfaces of the TPUs membranes were successfully modified and that cell adhesion was remarkably reduced.

  10. Radiation-Induced Grafting with One-Step Process of Waste Polyurethane onto High-Density Polyethylene

    Science.gov (United States)

    Park, Jong-Seok; Lim, Youn-Mook; Nho, Young-Chang

    2015-01-01

    The recycling of waste polyurethane (PU) using radiation-induced grafting was investigated. The grafting of waste PU onto a high-density polyethylene (HDPE) matrix was carried out using a radiation technique with maleic anhydride (MAH). HDPE pellets and PU powders were immersed in a MAH-acetone solution. Finally, the prepared mixtures were irradiated with an electron beam accelerator. The grafted composites were characterized by Fourier transformed infrared spectroscopy (FT-IR), surface morphology, and mechanical properties. To make a good composite, the improvement in compatibility between HDPE and PU is an important factor. Radiation-induced grafting increased interfacial adhesion between the PU domain and the HDPE matrix. When the absorbed dose was 75 kGy, the surface morphology of the irradiated PU/HDPE composite was nearly a smooth and single phase, and the elongation at break increased by approximately three times compared with that of non-irradiated PU/HDPE composite. PMID:28787813

  11. Radiation-Induced Grafting with One-Step Process of Waste Polyurethane onto High-Density Polyethylene

    Directory of Open Access Journals (Sweden)

    Jong-Seok Park

    2015-12-01

    Full Text Available The recycling of waste polyurethane (PU using radiation-induced grafting was investigated. The grafting of waste PU onto a high-density polyethylene (HDPE matrix was carried out using a radiation technique with maleic anhydride (MAH. HDPE pellets and PU powders were immersed in a MAH-acetone solution. Finally, the prepared mixtures were irradiated with an electron beam accelerator. The grafted composites were characterized by Fourier transformed infrared spectroscopy (FT-IR, surface morphology, and mechanical properties. To make a good composite, the improvement in compatibility between HDPE and PU is an important factor. Radiation-induced grafting increased interfacial adhesion between the PU domain and the HDPE matrix. When the absorbed dose was 75 kGy, the surface morphology of the irradiated PU/HDPE composite was nearly a smooth and single phase, and the elongation at break increased by approximately three times compared with that of non-irradiated PU/HDPE composite.

  12. Preparation of High Density Polyethylene/Waste Polyurethane Blends Compatibilized with Polyethylene-Graft-Maleic Anhydride by Radiation.

    Science.gov (United States)

    Park, Jong-Seok; Lim, Youn-Mook; Nho, Young-Chang

    2015-04-08

    Polyurethane (PU) is a very popular polymer that is used in a variety of applications due to its good mechanical, thermal, and chemical properties. However, PU recycling has received significant attention due to environmental issues. In this study, we developed a recycling method for waste PU that utilizes the radiation grafting technique. Grafting of waste PU was carried out using a radiation technique with polyethylene-graft-maleic anhydride (PE-g-MA). The PE-g-MA-grafted PU/high density polyethylene (HDPE) composite was prepared by melt-blending at various concentrations (0-10 phr) of PE-g-MA-grafted PU. The composites were characterized using fourier transform infrared spectroscopy (FT-IR), and their surface morphology and thermal/mechanical properties are reported. For 1 phr PU, the PU could be easily introduced to the HDPE during the melt processing in the blender after the radiation-induced grafting of PU with PE-g-MA. PE-g-MA was easily reacted with PU according to the increasing radiation dose and was located at the interface between the PU and the HDPE during the melt processing in the blender, which improved the interfacial interactions and the mechanical properties of the resultant composites. However, the elongation at break for a PU content >2 phr was drastically decreased.

  13. Preparation of High Density Polyethylene/Waste Polyurethane Blends Compatibilized with Polyethylene-Graft-Maleic Anhydride by Radiation

    Directory of Open Access Journals (Sweden)

    Jong-Seok Park

    2015-04-01

    Full Text Available Polyurethane (PU is a very popular polymer that is used in a variety of applications due to its good mechanical, thermal, and chemical properties. However, PU recycling has received significant attention due to environmental issues. In this study, we developed a recycling method for waste PU that utilizes the radiation grafting technique. Grafting of waste PU was carried out using a radiation technique with polyethylene-graft-maleic anhydride (PE-g-MA. The PE-g-MA-grafted PU/high density polyethylene (HDPE composite was prepared by melt-blending at various concentrations (0–10 phr of PE-g-MA-grafted PU. The composites were characterized using fourier transform infrared spectroscopy (FT-IR, and their surface morphology and thermal/mechanical properties are reported. For 1 phr PU, the PU could be easily introduced to the HDPE during the melt processing in the blender after the radiation-induced grafting of PU with PE-g-MA. PE-g-MA was easily reacted with PU according to the increasing radiation dose and was located at the interface between the PU and the HDPE during the melt processing in the blender, which improved the interfacial interactions and the mechanical properties of the resultant composites. However, the elongation at break for a PU content >2 phr was drastically decreased.

  14. Development of biomimetic thermoplastic polyurethane/fibroin small-diameter vascular grafts via a novel electrospinning approach.

    Science.gov (United States)

    Yu, Emily; Mi, Hao-Yang; Zhang, Jue; Thomson, James A; Turng, Lih-Sheng

    2018-04-01

    A new electrospinning approach for fabricating vascular grafts with a layered, circumferentially aligned, and micro-wavy fibrous structure similar to natural elastic tissues has been developed. The customized electrospinning collector was able to generate wavy fibers using the dynamic "jump rope" collecting process, which also solved the sample removal problem for mandrel-type collectors. In this study, natural silk fibroin and synthetic thermoplastic polyurethane (TPU) were combined at different weight ratios to produce hybrid small-diameter vascular grafts. The purpose of combining these two materials was to leverage the bioactivity and tunable mechanical properties of these natural and synthetic materials. Results showed that the electrospun fiber morphology was highly influenced by the material compositions and solvents employed. All of the TPU/fibroin hybrid grafts had mechanical properties comparable to natural blood vessels. The circumferentially aligned and wavy biomimetic configuration provided the grafts with a sufficient toe region and the capacity for long-term usage under repeated dilatation and contraction. Cell culture tests with human endothelial cells (EC) also revealed high cell viability and good biocompatibility for these grafts. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 985-996, 2018. © 2017 Wiley Periodicals, Inc.

  15. Graft copolymers of polyurethane with various vinyl monomers via radiation-induced miniemulsion polymerization: Influential factors to grafting efficiency and particle morphology

    Energy Technology Data Exchange (ETDEWEB)

    Wang Hua [CAS Key Laboratory of Soft Matter Chemistry, Department of Polymer Science and Engineering, University of Science and Technology of China (USTC), Hefei, Anhui 230026 (China); Wang Mozhen [CAS Key Laboratory of Soft Matter Chemistry, Department of Polymer Science and Engineering, University of Science and Technology of China (USTC), Hefei, Anhui 230026 (China)], E-mail: pstwmz@ustc.edu.cn; Ge Xuewu [CAS Key Laboratory of Soft Matter Chemistry, Department of Polymer Science and Engineering, University of Science and Technology of China (USTC), Hefei, Anhui 230026 (China)], E-mail: xwge@ustc.edu.cn

    2009-02-15

    Graft copolymers of polyurethane (PU) with various vinyl monomers were synthesized through a one-pot but two-step miniemulsion polymerization process. Firstly, the polycondensation of isophorone diisocyanate (IPDI) with hydroxyl-terminated polybutadiene (HTPB) had been performed in aqueous miniemulsion at 40 deg. C in order to obtain PU dispersions. Consecutively, an in-situ graft copolymerization of the vinyl monomers with the synthesized PU was initiated by {gamma}-ray radiation at room temperature. The grafting efficiency of PU with vinyl monomer (G{sub PU/monomer}) was calculated from {sup 1}H NMR spectra and the particle morphology of the final hybrid latex was observed by transmission electron microscopy (TEM). As there was no monomer transferring in miniemulsion system, homogenous hybrid particles would be synthesized provided that the monomer was miscible with PU, such as styrene. With the increase of the polarity of the monomer, the compatibility of PU with monomer decreased. G{sub PU/monomer} varied as G{sub PU/styrene}(37%)>G{sub PU/butyl} {sub acrylate} {sub (BA)}(21%)>G{sub PU/methyl} {sub methacrylate} {sub (MMA)}(12%). The proportion of homogeneous nucleation would increase as the hydrophilicity of the monomer increased. High temperature would destabilize the miniemulsion so as to result in a less grafting efficiency. Compared to the phase separation during the seeded emulsion polymerization, the miniemulsion polymerization method facilitated the preparation of homogeneous materials owing to its monomer droplet nucleation mechanism.

  16. A novel microporous polyurethane vascular graft: in vivo evaluation of the UTA prosthesis implanted as infra-renal aortic substitute in dogs.

    Science.gov (United States)

    Marois, Y; Akoum, A; King, M; Guidoin, R; von Maltzahn, W; Kowligi, R; Eberhart, R C; Teijeira, F J; Verreault, J

    1993-01-01

    A novel microporous polyurethane blood conduit developed at the University of Texas at Arlington was implanted as an infra-renal substitute in dogs. The prosthesis was fabricated by precipitating a solution of the polymer with dry nitrogen onto a rotating mandrel. The grafts were sterilized either by gamma radiation (series I) or ethylene oxide (series II); they were implanted for the following prescheduled periods: 4, 24, 48 hours, and 1 week (short-term) and 2, 4 weeks, 3 and 6 months (medium-term). The thrombohematological characteristics of each animal were evaluated prior to implantation and confirmed that the index of blood coagulability was normal. In the short-term group, five out of eight grafts were patent and three were partially occluded; four grafts in the medium-term group were patent; one was partially occluded; and three were thrombosed at retrieval. One week after implantation, the prostheses were surrounded by an external capsule, which was present mainly at the two anastomoses. The external capsule covered the entire graft at 3 months. No kinking of the grafts was observed and the presence of a mild yellow stain related to bilirubin uptake was detected at 2 weeks, 1, 3, and 6 months. Histological studies have revealed the formation of a thin internal capsule at both anastomoses, 2 weeks postimplantation, which was not anchored to the graft wall. In the medium-term group, the thrombosed grafts failed to develop an internal capsule, whereas the patent graft exhibited a thick internal capsule made of neocollagenous tissue over the entire graft. This new microporous polyurethane prosthesis did not perform satisfactorily as an infra-renal substitute in dogs and its in vivo stability requires further assessment. Thus, the concept of a polyurethane with closed pores does not achieve what was anticipated.

  17. Chemical and phase structure of poly cyanurate-polyurethane grafted semi interpenetrating polymer networks

    International Nuclear Information System (INIS)

    Fainleib, A.M.; Gomza, Yu.P.; Privalko, V.P.; Bershtein, V.A.; Carini, G.

    2001-01-01

    In this research the phase morphology and properties of dicyanate ester of bisphenol A (DCEBA) based poly cyanurate network (PCN) modified with linear polyurethane (LPU) were successfully studied by the combination of infra-red spectroscopy, small-angle X-ray scattering (SAXS), dynamic mechanical thermal analysis (DMTA), differential scanning calorimetry and laser-interferometric creep rate spectroscopy

  18. Alginate dressing and polyurethane film versus paraffin gauze in the treatment of split-thickness skin graft donor sites: a randomized controlled pilot study.

    Science.gov (United States)

    Kaiser, Dominik; Hafner, Jürg; Mayer, Dieter; French, Lars E; Läuchli, Severin

    2013-02-01

    To compare postoperative healing of split-thickness skin graft (STSG) donor sites using traditional dressings (paraffin gauze) or modern wound dressings (alginate dressing and polyurethane film) in a randomized controlled trial. Thirty patients were randomly assigned to treatment of an STSG donor site with an alginate dressing and a polyurethane film or nonadherent paraffin gauze. Outcome variables were pain (measured with a visual analog scale), amount of dressing changes, healing time, cosmetic outcome, treatment costs, and overall satisfaction with the procedure. There was no significant difference in pain (postoperative day 1: 2.1 vs 1.2, P = .26; postoperative days 5-7: 1.0 vs 0.9, P = .47; final removal: 1.9 vs 1.0, P = .19) and time to healing (18.1 vs 15.4 days, P = .29) between alginate/polyurethane film dressing and nonadherent paraffin gauze. The semiocclusive dressings with polyurethane film required multiple dressing changes, whereas the nonadherent paraffin gauze could be left in place until complete epithelialization. Treatment costs were substantially lower for paraffin gauze. Semiocclusive dressings with alginate dressings and polyurethane film showed no advantages over treatment with paraffin gauze. With lower costs and better patient acceptance, paraffin gauze dressings were the preferred treatment for STSG donor sites.

  19. Vascugraft polyurethane arterial prosthesis as femoro-popliteal and femoro-peroneal bypasses in humans: pathological, structural and chemical analyses of four excised grafts.

    Science.gov (United States)

    Zhang, Z; Marois, Y; Guidoin, R G; Bull, P; Marois, M; How, T; Laroche, G; King, M W

    1997-01-01

    Following positive results obtained in in vitro studies and in vivo implantations in animals, a clinical trial using the Vascugraft polyurethane arterial prosthesis as a below-knee substitute was undertaken in 15 patients. Eight grafts became occluded during the first year, and segments from four of them were explanted and made available for pathological, structural and chemical investigations. The implantation periods ranged from 21 to 358 days. Failures were associated with kinking (one case), possible anastomotic mismatch between the graft and the artery (one case), and poor run-off (two cases). No organized collagenous internal encapsulation was noted; however, endothelial-like cells were observed at the anastomotic site of one graft. No significant structural degradation of the prostheses was observed in those grafts implanted for 21, 38 and 46 days. Some deteriorations in the fibrous structure were observed on the external surface of the prosthesis implanted for 358 days. High-resolution carbon C1s analysis by ESCA demonstrated a 60 to 80% decrease in carbonate content on the surface of all explanted prostheses. Chemical analyses of each polyurethane graft by IR, SEC and DSC revealed no significant chemical changes. The clinical performance of the Vascugraft prosthesis for below-knee implantation proved to be no more impressive than that of expanded polytetrafluorethylene, the currently accepted reference. The decision by B. Braun Melsungen AG to end this program is therefore to be regarded as highly professional.

  20. Brilliant Blue FCF as an Alternative Dye for Saphenous Vein Graft Marking Effect on Conduit Function

    Science.gov (United States)

    Voskresensky, Igor V.; Wise, Eric S.; Hocking, Kyle M.; Li, Fan Dong; Osgood, Michael J.; Komalavilas, Padmini; Brophy, Colleen; Cheung-Flynn, Joyce

    2014-01-01

    IMPORTANCE Surgical skin markers are used off-label to mark human saphenous veins (HSVs) to maintain orientation before implantation as aortocoronary or peripheral arterial bypass grafts. These surgical skin markers impair functional responses of the HSV tissue. OBJECTIVES To investigate the effect of brilliant blue dye 1 (brilliant blue FCF [for food coloring]; hereinafter, FCF) as a nontoxic alternative marking dye and to determine whether FCF has pharmacological properties. DESIGN, SETTING, AND PARTICIPANTS Segments of HSVs were collected in university hospitals from patients undergoing coronary artery bypass grafting procedures immediately after harvest (unmanipulated) or after typical intraoperative surgical graft preparation (after manipulation). Rat inferior venae cavae were used to determine the pharmacological properties and cellular targets of FCF. Endothelial and smooth muscle functional responses were determined in a muscle bath, and intimal thickening in HSVs was determined after 14 days in organ culture. MAIN OUTCOMES AND MEASURES Contractile responses were measured in force and converted to stress. Smooth muscle function was expressed as maximal responses to potassium chloride depolarization contractions. Endothelial function was defined as the percentage of relaxation of maximal agonist-induced contraction. Neointimal thickness was measured by histomorphometric analysis. RESULTS Human saphenous veins stored in the presence of FCF had no loss of endothelial or smooth muscle function. Unmanipulated HSVs preserved in the presence of FCF demonstrated a significant increase in endothelial-dependent relaxation (mean [SEM], 25.2% [6.4%] vs 30.2% [6.7%]; P = .02). Application of FCF to functionally nonviable tissue significantly enhanced the smooth muscle responses (mean [SEM], 0.018 [0.004] × 105N/m2 vs 0.057 [0.016] × 105 N/m2; P = .05). Treatment with FCF reduced intimal thickness in organ culture (mean [SEM], −17.5% [2.1%] for unmanipulated HSVs vs

  1. A maleic anhydride grafted sugarcane bagasse adsorbent and its performance on the removal of methylene blue from related wastewater

    Energy Technology Data Exchange (ETDEWEB)

    Ge, Mingliang; Du, Mingyi; Zheng, Luoyun [Key Laboratory of Polymer Processing Engineering of Ministry of Education, National Engineering Research Center of Novel Equipment for Polymer Processing, School of Mechanical & Automotive Engineering, South China University of Technology, Guangzhou 510640 (China); Wang, Bingying; Zhou, Xiangyang [College of Chemistry and Chemical Engineering, Zhongkai University of Agriculture and Engineering, Guangzhou 510225 (China); Jia, Zhixin [College of Material Science and Engineering, South China University of Technology, Guangzhou 510640 (China); Hu, Guoqing [Key Laboratory of Polymer Processing Engineering of Ministry of Education, National Engineering Research Center of Novel Equipment for Polymer Processing, School of Mechanical & Automotive Engineering, South China University of Technology, Guangzhou 510640 (China); Jahangir Alam, S.M., E-mail: mejahangir@scut.edu.cn [Key Laboratory of Polymer Processing Engineering of Ministry of Education, National Engineering Research Center of Novel Equipment for Polymer Processing, School of Mechanical & Automotive Engineering, South China University of Technology, Guangzhou 510640 (China)

    2017-05-01

    Sugarcane bagasse (SCB) was selected as the supporting material for grafting maleic anhydride (MA) to obtain sugarcane-bagasse-grafting-maleic-anhydride (SCB-g-MA), which was used as an adsorbent for the removal of methylene blue (MB) in the dye-containing wastewater. The granular morphology and functional groups of the material were characterized by the scanning electron microscope (SEM), Fourier transforms infrared spectroscopy (FTIR), and solid-state analysis (13C NMR) methods. The effect(s) of the adsorbent dosage, adsorption time, initial concentration of MB, and the pH of solution on the MB adsorption performance of the material have been also investigated. The results showed that the adsorption capacity and removal rate of MB were found to be 82 mg/g and 98%, respectively. It has also showed that the adsorption behavior on the MB could be well described by the pseudo-second-order model integrated with Langmuir model. - Highlights: • Using solid phase grafting method to graft the maleic anhydride (MA) onto the Sugarcane bagasse (SCB) and get the SCB-g-MA. • SEM, FTIR and 13C NMR analysis were used to characterize the grafting of MA on to the SCB by the solid phase grafting method. • The adsorption capacity and removal rate of MB were to be 82 mg/g and 98% respectively, to show an excellent adsorption effect. • Pseudo-second-order model and Langmuir model are better fitted the adsorption kinetics and isotherms in this research.

  2. New research progress of vegetable oil-based polyurethanes

    Directory of Open Access Journals (Sweden)

    Hongjie LIU

    2016-10-01

    Full Text Available This paper summarizes the latest progress for vegetable oil-based polyurethanes mainly from the view of thermoset and thermoplastic. Firstly, the modification methods for traditional thermoset polyurethane are introduced, including physical modification methods (filling and alloying and chemical modification methods (copolymerization grafting, crosslinking and interpenetrating polymer network. Materials used for physical modification mainly contain inorganic materials such as SiO2 and organic substances such as cellulose. Grafting copolymerization of styrene, acrylate and other monomers with polyurethane is the main method of chemical modification. The characteristics, preparations and application fields of thermoplastic polyurethane are reviewed, and the preparations, performances and applications of oleic acid-based thermoplastic polyurethane are chiefly presented. The development prospects of vegetable oil-based polyurethane are put forward. Surface-initiated living polymerization and other methods are used to controllable chemical modification of the traditional thermoset polyurethane and click chemistry method is uesd to promote multi-functionalization of the thermoplastic polyurethane.

  3. Synthesis of co-polymer-grafted gum karaya and silica hybrid organic–inorganic hydrogel nanocomposite for the highly effective removal of methylene blue

    CSIR Research Space (South Africa)

    Mittal, H

    2015-11-01

    Full Text Available The aim of this work was to study the adsorption behavior of the nanosilica-containing hydrogel nanocomposite of gum karaya grafted with poly(acrylic acid-acrylamide) (GK-cl-P(AA-co-AAM)) in the adsorption of methylene blue (MB) from aqueous...

  4. Polyurethane membranes for surgical gown applications

    Science.gov (United States)

    Ukpabi, Pauline Ozoemena

    The Occupational Safety and Health Administration (OSHA) recently issued a directive requiring all employers to supply personnel protective equipment to employees who are at risk of exposure to blood or other potentially infectious body fluids. For the healthcare worker, a wide variety of surgical gowns is available commercially but there are concerns over their barrier effectiveness and/or wearer comfort. To successfully create a barrier fabric which combines resistance to fluid penetration with comfort, a complete understanding of the relationship between membrane structure and functional properties is required. In this study, we investigated the surface properties of hydrophilicity and hydrophobicity in polyurethane membranes intended for use in surgical gowns. The polyurethane membranes were grafted with side chains of varying lengths, polyethylene glycol (PEG) being used for the hydrophilic modifications and perfluoroalkyl compounds (a monofunctional acid and a difunctional amino alcohol) for the hydrophobic modifications. The hydrophilic treatment was intended to improve the comfort properties of monolithic membranes without adversely affecting their barrier properties. The hydrophobic treatment, on the other hand, was intended to improve the fluid repellency and hence barrier properties of microporous membranes without adversely affecting their comfort properties. Reflection infrared spectroscopy showed that fluorine was successfully grafted onto the polyurethane backbone during the hydrophobic modification, but was not sensitive enough to detect PEG grafting in leached polyethylene glycol-treated polyurethanes. X-ray photoelectron spectroscopy showed that the perfluoroalkylated polyurethanes contained up to 40% fluorine on their surfaces and the PEG-treated polyurethanes showed an increase in their C-O content over the unmodified polyurethane. Scanning electron microscopy not only showed that perfluoroalkylation yielded polyurethane membranes with very

  5. Shape memory polyurethane nanocomposites with functionalized graphene

    International Nuclear Information System (INIS)

    Choi, Jin Taek; Dao, Trung Dung; Oh, Kyung Min; Lee, Hyung-il; Jeong, Han Mo; Kim, Byung Kyu

    2012-01-01

    The roles of graphene in shape memory polyurethane nanocomposite (SMPUN) as a reinforcing filler, as a fixed structure for memorizing a specified original shape, and as a conductive filler to actuate shape recovery by resistive heating, were examined. The effectiveness of each role was modulated by functionalizing graphene with a hydroxyl group through oxidation with H 2 O 2 . The reinforcing effect of graphene and its role as a fixed structure were enhanced by the hydroxyl groups due to the increased grafting of polyurethane chains on graphene during the in situ preparation of SMPUN. However, the oxidation reduced the conductivity of SMPUN, resulting in deterioration of the resistive heating. (paper)

  6. Antimicrobial polyurethane thermosets based on undecylenic acid: synthesis and evaluation

    OpenAIRE

    Cádiz, V.; Galià, M.; Ronda, J.C.; Lligadas, G.; Bordons, A.; Esteve-Zarzoso, B.; Lluch, C.

    2014-01-01

    10.1002/mabi.201400017 In the present study, plant oil-derived surface-modifiable polyurethane thermosets are presented. Polyol synthesis is carried out taking advantage of thiol-yne photopolymerization of undecylenic acid derivatives containing methyl ester or hydroxyl moieties. The prepared methyl ester-containing polyurethanes allow surface modification treatment to enhance their hydrophilicity and impart antimicrobial activity through the following two steps: i) grafting poly(propylen...

  7. L-Lysine-grafted graphene oxide as an effective adsorbent for the removal of methylene blue and metal ions

    Directory of Open Access Journals (Sweden)

    Yan Yan

    2017-12-01

    Full Text Available In this paper, novel L-lysine-modified graphene oxide (Lys-GO was synthesized through amidation. The morphological and structural properties of Lys-GO were characterized using infrared spectrometry, scanning electronic microscopy and X-ray photoelectron spectroscopy. The as-prepared Lys-GO material was systematically investigated in a series of batch adsorption experiments for the removal of methylene blue (MB and copper ions (Cu2+ from wastewater. These results showed that Lys-GO is a bifunctional adsorbent for the removal of dyes and metal ions, and excellent adsorption efficiency was obtained. The maximum adsorption capacities for MB dye and Cu2+ were 1679.1 mg/g and 186.9 mg/g at 35 °C, respectively. The kinetics of adsorption followed well the linear pseudo-second-kinetic model. The isotherm results indicated that MB adsorption can be described with the Langmuir isotherm model, while the adsorption of Cu2+ can be described with the Freundlich model. The excellent adsorption capacity indicated that the Lys-GO may be a promising adsorption material for the removal of environmental pollutants.

  8. Szycher's handbook of polyurethanes

    National Research Council Canada - National Science Library

    Szycher, M

    2013-01-01

    .... Filled with tables, charts, and photographs, it includes new data on green polyurethanes, automotive applications, new coatings, new manufacturing equipment, new health-care uses, and other topics...

  9. Szycher's handbook of polyurethanes

    National Research Council Canada - National Science Library

    Szycher, M

    2013-01-01

    "Written as a reference for polyurethane technologists and end users, raw materials suppliers, and students in the field, this second edition covers the technical advances in the field over the past 10 years...

  10. Polyurethane-Foam Maskant

    Science.gov (United States)

    Bodemeijer, R.

    1985-01-01

    Brown wax previously used to mask hardware replaced with polyurethane foam in electroplating and electroforming operations. Foam easier to apply and remove than wax and does not contaminate electrolytes.

  11. Antimicrobial polyurethane thermosets based on undecylenic acid: synthesis and evaluation.

    Science.gov (United States)

    Lluch, Cristina; Esteve-Zarzoso, Braulio; Bordons, Albert; Lligadas, Gerard; Ronda, Juan C; Galià, Marina; Cádiz, Virginia

    2014-08-01

    In the present study, plant oil-derived surface-modifiable polyurethane thermosets are presented. Polyol synthesis is carried out taking advantage of thiol-yne photopolymerization of undecylenic acid derivatives containing methyl ester or hydroxyl moieties. The prepared methyl ester-containing polyurethanes allow surface modification treatment to enhance their hydrophilicity and impart antimicrobial activity through the following two steps: i) grafting poly(propylene glycol) monoamine (Jeffamine M-600) via aminolysis and ii) Jeffamine M-600 layer complexation with iodine. The antimicrobial activity of the iodine-containing polyurethanes is demonstrated by its capacity to inhibit the growth of Staphylococcus aureus, and Candida albicans in agar media. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. Biodegradation of polyurethanes; Polyurethane no biseibutsu bunkai

    Energy Technology Data Exchange (ETDEWEB)

    Kinpara, N.; Ando, M.; Ohira, Z. [Suzuki Motor Corp., Shizuoka (Japan); Nakajima, T.; Nakahara, T. [University of Tsukuba, Tsukuba (Japan)

    1997-10-01

    Different types of Polyurethane (PUR) are used for various industrial products and are used in increasing quantities every year. We experimented with biodegradation of PURs to dispose of industrial wastes. 2 strains of fungi and 1 strain of bacteria which were seemed to have the ability to degrade PURs well were isolated from various soils and waste water. These strains could degrade ester-type PUR and PUR made from a mixture of ester and ether. However, these strains could not degrade ether-type PUR. From Scanning Electron Microscopy observation, it is suggested that the microbial degradation proceeded in at least 2 patterns. 4 refs., 8 figs., 2 tabs.

  13. Calcar bone graft

    Energy Technology Data Exchange (ETDEWEB)

    Bargar, W.L.; Paul, H.A.; Merritt, K.; Sharkey, N.

    1986-01-01

    A canine model was developed to investigate the use of an autogeneic iliac bone graft to treat the calcar deficiency commonly found at the time of revision surgery for femoral component loosening. Five large male mixed-breed dogs had bilateral total hip arthroplasty staged at three-month intervals, and were sacrificed at six months. Prior to cementing the femoral component, an experimental calcar defect was made, and a bicortical iliac bone graft was fashioned to fill the defect. Serial roentgenograms showed the grafts had united with no resorption. Technetium-99 bone scans showed more uptake at three months than at six months in the graft region. Disulfine blue injection indicated all grafts were perfused at both three and six months. Thin section histology, fluorochromes, and microradiographs confirmed graft viability in all dogs. Semiquantitative grading of the fluorochromes indicated new bone deposition in 20%-50% of each graft at three months and 50%-80% at six months. Although the calcar bone graft was uniformly successful in this canine study, the clinical application of this technique should be evaluated by long-term results in humans.

  14. Shape memory polyurethane nanocomposites

    Science.gov (United States)

    Cao, Feina

    Shape memory polymers are smart materials which can remember their original shapes. However, the low recovery stress and low mechanical strength limit the commercial applications of shape memory polymers. In this study, nanoclays were introduced to shape memory polyurethanes (SMPU) to augment these properties by enhance the network of SMPU. Several factors which influence the shape recovery stress were evaluated, including the nature of polymer chain by using different monomers, type of clay particles, extent of filler dispersion, clay content and deformation conditions. It was found that only reactive clay particles were well dispersed into polyurethane matrix by the tethering between --CH2CH 2OH functional groups in clay surfactants and polyurethane chains. Two different shape memory polyurethanes (Systems I & II) prepared by bulk polymerization were compared. The shape memory effect of System I was triggered by melting of the soft segment crystals, while that of System II was by glass transition of the soft segments. It was seen that the reactive clay particles dispersed well in both polyurethane matrices and augmented the recovery stress, e.g., 20% increase with 1 wt % nanoclay in System I and 40% increase with 5 wt % nanoclay in System II were observed. In System I, clay particles interfered with soft segment crystallization, and promoted phase mixing between the hard and soft segments, thus affecting the fixity and recovery ratio. Nevertheless, the soft segment crystallinity was still enough and in some cases increased due to stretching to exhibit excellent shape fixity and shape recovery ratio. The higher loading of clay particles accelerated the stress relaxation, resulting in reduction of recovery stress. In System II, no significant effect of clay particles in phase separation was observed, so there was no influence of clay on shape fixity and recovery ratio. The recovery stress increased with reactive nanoclay content. It was also found that the recovery

  15. Nonwoven supported temperature-sensitive poly(N-isopropylacrylamide)/polyurethane copolymer hydrogel with antibacterial activity.

    Science.gov (United States)

    Liu, Baohua; Hu, Jinlian; Meng, Qinghao

    2009-04-01

    This article is focused on the study of the antibacterial activity of temperature sensitive poly(N-isopropylacrylamide/polyurethane (PNIPAAm/PU) hydrogel grafted nonwoven fabrics with chitosan modification. A series of temperature sensitive hydrogel grafted nonwoven fabrics with different N-isopropylacrylamide/polyurethane (NIPAAm/PU) feeding ratios have been synthesized by using ammonium persulfate (APS) as initiator and N,N,N',N'-tetramethyl-ethane-1,2-diamine (TEMED) as accelerator. FTIR and XPS were used to examine the surface modification of chitosan. The phase transition temperature of hydrogel grafted nonwoven fabrics was about 32 degrees C by DSC. S. aureus and E. coli were used to evaluate the antibacterial efficiency of the fabric composite. After chitosan modification, the hydrogel grafted nonwoven cellulose fabrics demonstrates an antibacterial activity to S. aureus. and E. coli and the antibacterial efficiency is about 80%.

  16. Polyurethanes with radiopaque properties.

    Science.gov (United States)

    James, Nirmala R; Philip, Juby; Jayakrishnan, A

    2006-01-01

    An aliphatic, commercially available, medical grade polyurethane, Tecoflex 80A was made radiopaque by coupling a 5-iodine-containing molecule, N-(2,6- diiodocarboxyphenyl)-3,4,5-triiodo benzamide (DCPTB) onto the polymer backbone. DCPTB was synthesized by coupling 4-amino-3,5-diiodobenzoic acid and 3,4,5-triiodobenzoic acid using dicyclohexyl carbodiimide. Radiopaque polyurethane thus obtained was characterized by IR, TGA, DSC and X-radiography. By optimizing the reaction conditions, it was possible to incorporate about 8% iodine in the polymer (wt/wt) to achieve radiopacity almost equivalent to that of a 2mm thick aluminium wedge. However, the products differed from the starting polymer in thermal characteristics. The starting polymer showed two endothermic transitions, the first one due to glass transition of the soft segment and the second one due to disruption of the hard segments. After modification, the second transition shifted to a lower temperature, while the first transition remained unaltered. Also, the modified polymers showed reduced thermal stability compared to the starting polymer. These observations could be explained on the basis of the reduced extent of intermolecular hydrogen bonding among the hard segments of the end product. Radiopaque polyurethanes are expected to have significant advantage over their non-radiopaque counterparts in many medical and related applications.

  17. Nano-TiO2/polyurethane composites for antibacterial and self-cleaning coatings.

    Science.gov (United States)

    Charpentier, P A; Burgess, K; Wang, L; Chowdhury, R R; Lotus, A F; Moula, G

    2012-10-26

    Grafting from polymerization was used to synthesize nano-titania/polyurethane (nTiO(2)/polyurethane) composite coatings, where nTiO(2) was chemically attached to the backbone of the polyurethane polymer matrix with a bifunctional monomer, 2,2-bis(hydroxymethyl) propionic acid (DMPA). This bifunctional monomer can coordinate to nTiO(2) through an available -COOH group, with two available hydroxyl groups that can react with diisocyanate terminated pre-polyurethane through step-growth polymerization. The coordination reaction was monitored by FTIR and TGA, with the coordination reaction found to follow first order kinetics. After step-growth polymerization, the polyurethane nanocomposites were found to be stable on standing with excellent distribution of Ti in the polymer matrix without any significant agglomeration compared to simple physical mixtures of nTiO(2) in the polyurethane coatings. The functionalized nTiO(2)-polyurethane composite coatings showed excellent antibacterial activity against gram-negative bacteria Escherichia coli; 99% of E. coli were killed within less than one hour under solar irradiation. Self-cleaning was also demonstrated using stearic acid as a model for 'dirt'.

  18. NATURAL FIBER REINFORCED POLYURETHANE RIGID FOAM

    OpenAIRE

    Seydibeyoglu, M.Ozgur; Demiroğlu, Sibel; Erdoğan, Fatma; Akın, Ecem; Ayvalık, Aynur; Karavana, Hüseyin Ata

    2017-01-01

    The main objective of this study was to prepare polyurethane foam reinforced with local Turkish natural resources. In this work, olive kernel and nutshell fibers were used for reinforcing the polyurethane foam. In order to characterize reinforced polyurethane samples, mechanical, chemical, thermal, and morphological methods were used. Mechanical properties of polyurethane foam were measured by compression test. With compression test, it was observed that compressive strength of polyurethane f...

  19. Nanoreinforced shape memory polyurethane

    Science.gov (United States)

    Richardson, Tara Beth

    Shape memory polymers (SMPs) are functional materials, which find applications in a broad range of temperature sensing elements and biological micro-electro-mechanical systems (MEMS). These polymers are capable of fixing a transient shape and recovering to their original shape after a series of thermo-mechanical treatments. Generally, these materials are thermoplastic segmented polyurethanes composed of soft segments, usually formed by a polyether macroglycol, and hard segments formed from the reaction of a diisocyanate with a low molecular mass diol. The hard segment content is a key parameter to control the final properties of the polymer, such as rubbery plateau modulus, melting point, hardness, and tensile strength. The long flexible soft segment largely controls the low temperature properties, solvent resistance, and weather resistance properties. The morphology and properties of polyurethanes (PU) are greatly influenced by the ratio of hard and soft block components and the average block lengths. However, in some applications, SMPs may not generate enough recovery force to be useful. The reinforcement of SMPs using nanofillers represents a novel approach of enhancing the performance of these materials. The incorporation of these fillers into SMPs can produce performance enhancements (particularly elastic modulus) at small nanoparticle loadings (˜1-2 wt %). An optimal performance of nanofiller-polymer nanocomposites requires uniform dispersion of filler in polymers and good interfacial adhesion. The addition of nanofillers like cellulose nanofibers (CNF), conductive cellulose nanofibers (C-CNF), and carbon nanotubes (CNTs) allows for the production of stiffer materials with deformation capacity comparable to that of the unfilled polymer. Additionally, the use of conductive nanoreinforcements such as C-CNF and CNTs leads to new pathways for actuation of the shape memory effect. During this work, thermoplastic shape memory polyurethanes were synthesized with

  20. Occupational urticaria from welding polyurethane

    Energy Technology Data Exchange (ETDEWEB)

    Kanerva, L.; Estlander, T.; Jolanki, R.; Laehteenmaeki, M.T.Ke.; Keskinen, H. (Institute of Occupational Health, Helsinki (Finland))

    1991-05-01

    An urticarial reaction associated with high fever developed in a welder on four occasions while he was welding steel profiles filled with polyurethane. The fumes emitted during pyrolysis of polyurethane and inhaled by the patient probably caused the urticarial reaction. Provocation tests with two pyrolysis products, 4,4-diphenylmethane diisocyanate and 4,4-diaminophenylmethane, were negative. This case demonstrates the difficulty in detecting the cause of urticaria induced by airborne chemicals.

  1. Lignin-based polyurethane materials

    OpenAIRE

    Cateto, C.A.; Barreiro, M.F.; Rodrigues, A.E.; Belgacem, M.N.

    2008-01-01

    Four technical lignins (Alcell, Indulin AT, Sarkanda and Curan 27-11P) were used as macromonomers in the synthesis of polyurethane materials following two global approaches. In the first one Alcell and Indulin AT lignins were used directly as co-monomers in combination with a linear polycaprolactone (PCL) in order to produce polyurethane elastomers where lignin content varied between 10 and 25% (w/w) with respect to polyol mixture (PCL+lignin). The thermomechanical properties o...

  2. Polyurethane adhesive ingestion.

    Science.gov (United States)

    Fitzgerald, Kevin T; Bronstein, Alvin C

    2013-02-01

    Polyurethane adhesives are found in a large number of household products in the United States and are used for a variety of purposes. Several brands of these expanding wood glues (those containing diphenylmethane diisocyanate [MDI]) have the potential to form gastrointestinal (GI) foreign bodies if ingested. The ingested adhesive forms an expanding ball of glue in the esophagus and gastric lumen. This expansion is caused by a polymerization reaction using the heat, water, and gastric acids of the stomach. A firm mass is created that can be 4-8 times its original volume. As little as 2 oz of glue have been reported to develop gastric foreign bodies. The obstructive mass is reported to form within minutes of ingestion of the adhesive. The foreign body can lead to esophageal impaction and obstruction, airway obstruction, gastric outflow obstruction, mucosal hemorrhage, ulceration, laceration, perforation of the esophageal and gastric linings, and death. Clinical signs following ingestion include anorexia, lethargy, vomiting, tachypnea, and abdominal distention and pain, and typically develop within 12 hours. Clinical signs may depend upon the size of the mass. If left untreated, perforation and rupture of the esophagus or stomach can occur. The glue mass does not stick to the GI mucosa and is not always detectable on abdominal palpation. Radiographs are recommended to confirm the presence of the "glue-ball" foreign body, and radiographic evidence of the obstruction may be seen as early as 4-6 hours following ingestion. Emesis is contraindicated owing to the risk of aspiration of the glue into the respiratory tree or the subsequent lodging of the expanding glue mass in the esophagus. Likewise, efforts to dilute the glue and prevent the formation of the foreign body through administration of liquids, activated charcoal, or bulk-forming products to push the foreign body through the GI tract have proven ineffective. Even endoscopy performed to remove the foreign body has

  3. 40 CFR 721.8090 - Polyurethane polymer.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Polyurethane polymer. 721.8090 Section... Substances § 721.8090 Polyurethane polymer. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as a polyurethane polymer (P-94-47) is subject...

  4. Polyurethane Foams with Pyrimidine Rings

    Directory of Open Access Journals (Sweden)

    Kania Ewelina

    2014-09-01

    Full Text Available Oligoetherols based on pyrimidine ring were obtained upon reaction of barbituric acid with glycidol and alkylene carbonates. These oligoetherols were then used to obtain polyurethane foams in the reaction of oligoetherols with isocyanates and water. The protocol of foam synthesis was optimized by the choice of proper kind of oligoetherol and synthetic composition. The thermal resistance was studied by dynamic and static methods with concomitant monitoring of compressive strength. The polyurethane foams have similar physical properties as the classic ones except their enhanced thermal resistance. They stand long-time heating even at 200°C. Moreover thermal exposition of foams results generally in increase of their compressive strength.

  5. Bioactive polyurethane implants with hydroxyapatite

    Energy Technology Data Exchange (ETDEWEB)

    Rozhnova, R.; Kebuladze, I.; Galatenko, N. [NAS Ukraine, Kiev (Ukraine). Dept. of Polymers of Medical Appointment

    2001-07-01

    Biologically active polyurethane compositions for plastic of bone defects that contain bioceramic - hydroxyapatite (HAP) and immunomodulator - levamisole (LEV) were designed. The influence of the biologically active fillers in structure polyurethane compositions on their physical and chemical properties in condition in vivo by method of Equilibrium Swelling, method of IR-spectroscopy, roentgen-structural analysis was studied. The introduce in structure of the biodegraded polymeric matrix of HAP is established to promote accumulation of the inorganic component of bone tissue in vivo which is being by basis of the bone formation in regenerating tissue. (orig.)

  6. Polyurethane - positioning aids in radiotherapy

    International Nuclear Information System (INIS)

    Alzen, G.; Boeck, E.G.; Thelen, M.; Kutzner, J.

    1985-01-01

    A simple and cheap method is described for the manufacturing of individual positioning aids made of foamed polyurethane. Some examples are given to demonstrate the applicability of these positioning aids for the irradiation of different body regions. The reproducibility of the radiation field in the head and neck area was investigated with and without positioning aid. It was proved that the field is adjusted more exactly when positioning aids are applied. The dosimetric investigations performed showed a negligible influence of foamed polyurethane on the radiation quality. So the positioning aids could be left within the radiation field when drawing the field borders. (orig.) [de

  7. Blue lesions.

    Science.gov (United States)

    Longo, Caterina; Scope, Alon; Lallas, Aimilios; Zalaudek, Iris; Moscarella, Elvira; Gardini, Stefano; Argenziano, Giuseppe; Pellacani, Giovanni

    2013-10-01

    Blue color is found in a wide range of malignant and benign melanocytic and nonmelanocytic lesions and in lesions that result from penetration of exogenous materials, such as radiation or amalgam tattoo or traumatic penetration of particles. Discriminating between different diagnostic entities that display blue color relies on careful patient examination and lesion assessment. Dermoscopically, the extent, distribution, and patterns created by blue color can help diagnose lesions with specificity and differentiate between benign and malignant entities. This article provides an overview of the main diagnoses whereby blue color can be found, providing simple management rules for these lesions. Copyright © 2013 Elsevier Inc. All rights reserved.

  8. Additive Manufacturing of Polyurethane Materials

    Energy Technology Data Exchange (ETDEWEB)

    Kunc, Vlastimil [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Lindahl, John M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Minneci, Robert P. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Pyzik, Alek [Dow Chemical Company, Saginaw, MI (United States); Gorin, Craig [Dow Chemical Company, Midland, MI (United States); Allen, Sharon [Dow Chemical Company, Midland, MI (United States); Wilson, Keith [Dow Chemical Company, Midland, MI (United States); Howard, Kevin [Dow Chemical Company, Midland, MI (United States)

    2017-08-10

    ORNL worked with The DOW Chemical Company to validate the feasibility of 3D printing DOW’s polyurethane (PU) materials using ORNL’s equipment and know-how. This led to the development of the first directly-3D-printable PU material.

  9. Open-celled polyurethane foam

    Science.gov (United States)

    Russell, L. W.

    1970-01-01

    Open-celled polyurethane foam has a density of 8.3 pounds per cubic foot and a compressive strength of 295 to 325 psi. It is useful as a porous spacer in layered insulation and as an insulation material in vacuum tight systems.

  10. Washing Off Polyurethane Foam Insulation

    Science.gov (United States)

    Burley, Richard K.; Fogel, Irving

    1990-01-01

    Jet of hot water removes material quickly and safely. Simple, environmentally sound technique found to remove polyurethane foam insulation from metal parts. Developed for (but not limited to) use during rebuilding of fuel system of Space Shuttle main engine, during which insulation must be removed for penetrant inspection of metal parts.

  11. High molecular weight polyurethanes and a polyurethane urea based on 1,4-butanediisocyanate

    NARCIS (Netherlands)

    Spaans, CJ; de Groot, JH; Dekens, FG; Pennings, AJ

    New biomedical polyurethanes and a polyurethane urea based on epsilon-caprolactone and 1,4-butanediisocyanate have been developed. On degradation, only non-toxic products are produced. The polyurethane urea with poly(epsilon-caprolactone) soft segments and butanediisocyanate/butanediamine hard

  12. Polyurethane adhesives in flat roofs

    OpenAIRE

    Bogárová Markéta; Stodůlka Jindřich; Šuhajda Karel

    2017-01-01

    It is necessary to stabilize individual layers of flat roofs, mainly because of wind suction. Apart from anchoring and surcharge, these layers can be secured by bonding. At present gluing is an indispensable and widely used stabilization method. On our market we can found many types of adhesives, most widely used are based on polyurethane. This paper focuses on problematic about stabilization thermal insulation from expanded polystyrene to vapor barrier from bitumen. One of the main issues is...

  13. Polyurethane adhesives in flat roofs

    Directory of Open Access Journals (Sweden)

    Bogárová Markéta

    2017-01-01

    Full Text Available It is necessary to stabilize individual layers of flat roofs, mainly because of wind suction. Apart from anchoring and surcharge, these layers can be secured by bonding. At present gluing is an indispensable and widely used stabilization method. On our market we can found many types of adhesives, most widely used are based on polyurethane. This paper focuses on problematic about stabilization thermal insulation from expanded polystyrene to vapor barrier from bitumen. One of the main issues is to calculate the exact amount of adhesive, which is required to guarantee the resistance against wind suction. In this problematic we can not find help neither in technical data sheets provided by the manufactures. Some of these data sheets contain at least information about amount of adhesive depending on location in roof plane and building height, but they do not specify the strength of such connection. It was therefore resorted to select several representatives polyurethane adhesives and their subsequent testing on specimens simulating the flat roof segment. The paper described the test methodology and results for two types of polyurethane adhesives.

  14. Magnetizable stent-grafts enable endothelial cell capture

    Energy Technology Data Exchange (ETDEWEB)

    Tefft, Brandon J. [Department of Cardiovascular Diseases, Mayo Clinic, Rochester, MN (United States); Uthamaraj, Susheil [Division of Engineering, Mayo Clinic, Rochester, MN (United States); Harburn, J. Jonathan [School of Medicine, Pharmacy and Health, Durham University, Stockton-on-Tees (United Kingdom); Hlinomaz, Ota [Department of Cardioangiology, St. Anne' s University Hospital, Brno (Czech Republic); Lerman, Amir [Department of Cardiovascular Diseases, Mayo Clinic, Rochester, MN (United States); Dragomir-Daescu, Dan [Department of Physiology and Biomedical Engineering, Mayo Clinic, Rochester, MN (United States); Sandhu, Gurpreet S., E-mail: sandhu.gurpreet@mayo.edu [Department of Cardiovascular Diseases, Mayo Clinic, Rochester, MN (United States)

    2017-04-01

    Emerging nanotechnologies have enabled the use of magnetic forces to guide the movement of magnetically-labeled cells, drugs, and other therapeutic agents. Endothelial cells labeled with superparamagnetic iron oxide nanoparticles (SPION) have previously been captured on the surface of magnetizable 2205 duplex stainless steel stents in a porcine coronary implantation model. Recently, we have coated these stents with electrospun polyurethane nanofibers to fabricate prototype stent-grafts. Facilitated endothelialization may help improve the healing of arteries treated with stent-grafts, reduce the risk of thrombosis and restenosis, and enable small-caliber applications. When placed in a SPION-labeled endothelial cell suspension in the presence of an external magnetic field, magnetized stent-grafts successfully captured cells to the surface regions adjacent to the stent struts. Implantation within the coronary circulation of pigs (n=13) followed immediately by SPION-labeled autologous endothelial cell delivery resulted in widely patent devices with a thin, uniform neointima and no signs of thrombosis or inflammation at 7 days. Furthermore, the magnetized stent-grafts successfully captured and retained SPION-labeled endothelial cells to select regions adjacent to stent struts and between stent struts, whereas the non-magnetized control stent-grafts did not. Early results with these prototype devices are encouraging and further refinements will be necessary in order to achieve more uniform cell capture and complete endothelialization. Once optimized, this approach may lead to more rapid and complete healing of vascular stent-grafts with a concomitant improvement in long-term device performance. - Highlights: • Magnetic stent-grafts were made from 2205 steel stents and polyurethane nanofibers. • Stent-grafts remained patent and formed a thin and uniform neointima when implanted. • Stent-grafts captured endothelial cells labeled with magnetic nanoparticles.

  15. Preparation of collagen/polyurethane/knitted silk as a composite scaffold for tendon tissue engineering.

    Science.gov (United States)

    Sharifi-Aghdam, Maryam; Faridi-Majidi, Reza; Derakhshan, Mohammad Ali; Chegeni, Arash; Azami, Mahmoud

    2017-07-01

    The main objective of this study was to prepare a hybrid three-dimensional scaffold that mimics natural tendon tissues. It has been found that a knitted silk shows good mechanical strength; however, cell growth on the bare silk is not desirable. Hence, electrospun collagen/polyurethane combination was used to cover knitted silk. A series of collagen and polyurethane solutions (4%-7% w/v) in aqueous acetic acid were prepared and electrospun. According to obtained scanning electron microscopy images from pure collagen and polyurethane nanofibers, concentration was set constant at 5% (w/v) for blend solutions of collagen/polyurethane. Afterward, blend solutions with the weight ratios of 75/25, 50/50 and 25/75 were electrospun. Scanning electron microscopy images demonstrated the smooth and uniform morphology for the optimized nanofibers. The least fibers diameter among three weight ratios was found for collagen/polyurethane (25/75) which was 100.86 ± 40 nm and therefore was selected to be electrospun on the knitted silk. Attenuated total reflectance-Fourier transform infrared spectra confirmed the chemical composition of obtained electrospun nanofibers on the knitted silk. Tensile test of the specimens including blend nanofiber, knitted silk and commercial tendon substitute examined and indicated that collagen/polyurethane-coated knitted silk has appropriate mechanical properties as a scaffold for tendon tissue engineering. Then, Alamar Blue assay of the L929 fibroblast cell line seeded on the prepared scaffolds demonstrated appropriate viability of the cells with a significant proliferation on the scaffold containing more collagen content. The results illustrate that the designed structure would be promising for being used as a temporary substitute for tendon repair.

  16. Formulation, Preparation, and Characterization of Polyurethane Foams

    Science.gov (United States)

    Pinto, Moises L.

    2010-01-01

    Preparation of laboratory-scale polyurethane foams is described with formulations that are easy to implement in experiments for undergraduate students. Particular attention is given to formulation aspects that are based on the main chemical reactions occurring in polyurethane production. This allows students to develop alternative formulations to…

  17. The Effect of Reactives Diluents to the Physical Properties of Acrylated Palm Oil Based Polyurethane Coatings

    Directory of Open Access Journals (Sweden)

    Onn Munirah

    2016-01-01

    Full Text Available The development of polyurethane with hydroxyl access in a molecule leads to a new alternative of low toxicity green product. Palm oil is one of the major commodities in Malaysia. The potential of palm oil to be used as coatings raw material such as alkyd is limited due to low unsaturated side on fatty acid chains. To overcome this limitation, palm oil was modified through transesterification process to produce polyol. Acrylated isocyanate (urethane oligomer was then grafted onto polyol to produce polyurethane with vinylic ends. The polyurethane was formulated with different cross-linkers (reactive diluents and cured under UV radiation. The effect of three different diluents; monoacrylate, diacrylate and triacrylate on the properties of cured polymer were studied in this research. Fourier Transform Infrared (FTIR, Hydroxyl Value Titration, Gel Content, and Volatile Organic Compound (VOC were used for characterization. Physical testing performed were Pencil Hardness and Pull-Off Adhesion test. Novel palm oil-based polyurethane coatings have been found to have good properties with mono acrylate functionality.

  18. Preparation of Polyurethane Acrylate Coated Carbon Nanotube Nanocomposites by Emulsion Polymerization.

    Science.gov (United States)

    Talat, Jila; Sabzi, Mohammad; Safibonab, Behrouz; Hasanzadeh, Iraj; Arman, Ali; Karimzadeh, Isa

    2018-02-01

    The aim of this work was to prepare strong and conductive polyurethane acrylate nanocomposites. First, urethane prepolymers with different molecular weights and hydrophilicities were synthetized. Then, their corresponding polyurethane acrylate nanocomposites were prepared by ultrasonically-assisted emulsion polymerization in the presence of various ratios of urethane prepolymers and acrylate monomers. Thermogravimetric analysis (TGA) and tensile results showed that thermal stability and mechanical properties of polyurethane acrylate samples are significantly dependent on the molecular weight and hydrophilicity of the urethane prepolymer as well as the content of acrylate monomers. Polyurethane acrylate sample (i.e., PUAc-2B50) with optimum mechanical properties and thermal stability were chosen as matrix to prepare nanocomposites in the presence of nanotubes grafted with polymerizable acrylate groups (G-MWNTs). Transmission electron microscope (TEM) revealed that the surface of nanotubes is uniformly coated with polymer nanoparticles. The nanocomposites containing 3 wt% G-MWNTs demonstrated a great modulus up to 374 MPa and excellent strength up to 18.74 MPa. Meanwhile, they indicated remarkable high electrical and thermal conductivities; as the electrical conductivity of the nanocomposites increased by more than twelve orders of magnitude, and thermal conductivity reached to 12.5 times of the neat matrix. The developed nanocomposites hold high potential for diverse applications, such as printable electronic devices, nano-sensors, and heat/electrical induced shape memory polymers.

  19. Fabrication and evaluation of physical properties and cytotoxicity of zein-based polyurethanes.

    Science.gov (United States)

    Du, Xinshen; Li, Yinping; Liu, Xing; Wang, Xiong; Huselstein, Celine; Zhao, Yanteng; Chang, Peter R; Chen, Yun

    2014-03-01

    Polyurethane prepolymer (PUP) was first synthesized from polycaprolactone diol and isophorone diisocyanate; and then a series of zein-based polyurethane (ZEPU) sheets was fabricated from PUP and zein (ZE) using a hot press and moulding process without addition of other additives. Effects of ZE content (WZE) on the structure and properties of the resultant ZEPU sheets were investigated by Fourier transform infrared spectroscopy, scanning electron microscopy, dynamic mechanical analysis, tensile testing, and dissolubility testing in alcohol. The results indicated that cross-linking and grafting reactions occurred between ZE and PUP to form new polyurethane showing a higher thermal stability, flexibility, and alcohol-resistance than the neat ZE sheets. For example, the elongation at break of ZEPU with 50 % WZE was 211.2 %, which was 47 times higher than that of neat ZE sheet. ZE molecules acted as both cross-linkers and polymer fillers in ZEPU sheets. The cytotoxicity and cytocompatibility of ZEPU sheets were evaluated by cell culture in vitro. The ZEPU sheets showed non- or low-cytotoxicity, and L929 cells grew and expanded well on the surfaces of the sheets with WZE over 50 %. Undoubtedly, the fabrication of ZE-based polyurethanes without toxic additives such as catalysts, cross-linkers and chain extenders improved the physical properties and cytocompatibility of zein, thus widening the possible range of applications for zein-based biomaterials.

  20. Blue gods, blue oil, and blue people.

    Science.gov (United States)

    Fairbanks, V F

    1994-09-01

    Studies of the composition of coal tar, which began in Prussia in 1834, profoundly affected the economies of Germany, Great Britain, India, and the rest of the world, as well as medicine and surgery. Such effects include the collapse of the profits of the British indigo monopoly, the growth in economic power of Germany based on coal tar chemistry, and an economic crisis in India that led to more humane tax laws and, ultimately, the independence of India and the end of the British Empire. Additional consequences were the development of antiseptic surgery and the synthesis of a wide variety of useful drugs that have eradicated infections and alleviated pain. Many of these drugs, particularly the commonly used analgesics, sulfonamides, sulfones, and local anesthetics, are derivatives of aniline, originally called "blue oil" or "kyanol." Some of these aniline derivatives, however, have also caused aplastic anemia, agranulocytosis, and methemoglobinemia (that is, "blue people"). Exposure to aniline drugs, particularly when two or three aniline drugs are taken concurrently, seems to be the commonest cause of methemoglobinemia today.

  1. Triple shape memory effect of star-shaped polyurethane.

    Science.gov (United States)

    Yang, Xifeng; Wang, Lin; Wang, Wenxi; Chen, Hongmei; Yang, Guang; Zhou, Shaobing

    2014-05-14

    In this study, we synthesized one type of star-shaped polyurethane (SPU) with star-shaped poly(ε-caprolactone) (SPCL) containing different arm numbers as soft segment and 4,4'-diphenyl methane diisocyanate (MDI) as well as chain extender 1,4-butylene glycol (BDO) as hard segment. Proton nuclear magnetic resonance (1H-NMR) confirmed the chemical structure of the material. Differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA) results indicated that both the melting temperature (Tm) and transition temperature (Ttrans) of SPU decreased with the hard segment composition increase. X-ray diffraction (XRD) results demonstrated that the increase of the crystallinity of SPU following the raised arm numbers endowed a high shape fixity of six-arm star-shaped polyurethane (6S-PU) and a wide melting temperature range, which resulted in an excellent triple-shape memory effect of 6S-PU. The in vitro cytotoxicity assay evaluated with osteoblasts through Alamar blue assay demonstrates that this copolymer possessed good cytocompatibility. This material can be potentially used as a new smart material in the field of biomaterials.

  2. The effect of native silk fibroin powder on the physical properties and biocompatibility of biomedical polyurethane membrane.

    Science.gov (United States)

    Zhuang, Yan; Zhang, Qian; Feng, Jinqi; Wang, Na; Xu, Weilin; Yang, Hongjun

    2017-04-01

    Naturally derived fibers such as silk fibroin can potentially enhance the biocompatibility of currently used biomaterials. This study investigated the physical properties of native silk fibroin powder and its effect on the biocompatibility of biomedical polyurethane. Native silk fibroin powder with an average diameter of 3 µm was prepared on a purpose-built machine. A simple method of phase inversion was used to produce biomedical polyurethane/native silk fibroin powder hybrid membranes at different blend ratios by immersing a biomedical polyurethane/native silk fibroin powder solution in deionized water at room temperature. The physical properties of the membranes including morphology, hydrophilicity, roughness, porosity, and compressive modulus were characterized, and in vitro biocompatibility was evaluated by seeding the human umbilical vein endothelial cells on the top surface. Native silk fibroin powder had a concentration-dependent effect on the number and morphology of human umbilical vein endothelial cells growing on the membranes; cell number increased as native silk fibroin powder content in the biomedical polyurethane/native silk fibroin powder hybrid membrane was increased from 0% to 50%, and cell morphology changed from spindle-shaped to cobblestone-like as the native silk fibroin powder content was increased from 0% to 70%. The latter change was related to the physical characteristics of the membrane, including hydrophilicity, roughness, and mechanical properties. The in vivo biocompatibility of the native silk fibroin powder-modified biomedical polyurethane membrane was evaluated in a rat model; the histological analysis revealed no systemic toxicity. These results indicate that the biomedical polyurethane/native silk fibroin powder hybrid membrane has superior in vitro and in vivo biocompatibility relative to 100% biomedical polyurethane membranes and thus has potential applications in the fabrication of small-diameter vascular grafts and in

  3. Cultivation of porcine hepatocytes in polyurethane nonwovens as part of a biohybrid liver support system.

    Science.gov (United States)

    Linti, C; Zipfel, A; Schenk, M; Dauner, M; Doser, M; Viebahn, R; Becker, H D; Planck, H

    2002-10-01

    Many patients suffering from end-stage liver disease cannot be transplanted within reasonable time due to the shortage of donor organs. Bioartificial liver support systems may contribute to the liver regeneration or bridging the time until a liver graft for transplantation becomes available. Nonwovens with integrated oxygenation capacity have been developed and manufactured by melt blow technology using thermoplastic polyurethane. Capillary membranes for oxygenation were integrated into the nonwoven during the processing. The polyurethane nonwoven structures with adapted pore size and high pore volume allow high cell densities in the hepatocyte culture. The three-dimensional cell culture was housed by a flow bioreactor system and was integrated in a closed loop circulation with monitoring possibilities for pressure, pH, temperature, ammonia, and oxygen. Hepatocytes were isolated from rats or pigs by collagenase perfusion and infused into the medium-perfused circulation. Cells showed high viability and hepatocyte specific cytochrome P450-dependent metabolic function in culture (MEGX test).

  4. Stent graft placement for dysfunctional arteriovenous grafts

    Energy Technology Data Exchange (ETDEWEB)

    Jeon, Gyeong Sik [Dept. of Radiology, CHA Bundang Medical Center, College of Medicine, CHA University, Seongnam (Korea, Republic of); Shin, Byung Seok; Ohm, Joon Young; Ahn, Moon Sang [Chungnam National University Hospital, Daejeon (Korea, Republic of)

    2015-07-15

    This study aimed to evaluate the usefulness and outcomes of stent graft use in dysfunctional arteriovenous grafts. Eleven patients who underwent stent graft placement for a dysfunctional hemodialysis graft were included in this retrospective study. Expanded polytetrafluoroethylene covered stent grafts were placed at the venous anastomosis site in case of pseudoaneurysm, venous laceration, elastic recoil or residual restenosis despite the repeated angioplasty. The patency of the arteriovenous graft was evaluated using Kaplan-Meier analysis. Primary and secondary mean patency was 363 days and 741 days. Primary patency at 3, 6, and 12 months was 82%, 73%, and 32%, respectively. Secondary patency at the 3, 6, 12, 24, and 36 months was improved to 91%, 82%, 82%, 50%, and 25%, respectively. Fractures of the stent graft were observed in 2 patients, but had no effect on the patency. Stent graft placement in dysfunctional arteriovenous graft is useful and effective in prolonging graft patency.

  5. Synthesis and characterization of novel fluoroalkyl-terminated hyperbranched polyurethane latex

    Science.gov (United States)

    Xu, Wei; Zhao, Weijia; Hao, Lifen; Wang, Sha; Pei, Mengmeng; Wang, Xuechuan

    2018-04-01

    Waterborne polyurethane (PU) emulsions are widely used in various fields and the demand for them is ever-increasing over the years. However, the hydrophilic chain extender inevitably bonded into the PU backbone can affect the water tolerance of PU. Thus, it is of great importance to improve PU water resistance effectively. Herein, novel fluoroalkyl-terminated hyperbranched polyurethane (HBPUF) latex was accordingly synthesized by graft reaction of perfluorohexyl ethyl alcohol and hyperbranched polyurethane (HBPU), which was previously obtained from interaction between hydroxyl-terminated hyperbranched polymer and PU prepolymer manufactured via the acetone process, as well as using neutralization, adding water, and high-speed stirring operations. We characterized the resultants and investigated its surface properties by IR, NMR, TEM, XRD, TGA, DSC, FE-SEM, AFM, XPS, and contact angle measurements, etc. IR and NMR tests confirmed that the fluorinated fragments had been grafted onto the tail end of HBPU. TEM, XRD, DSC, and FE-SEM results all accounted for the fact that there were multi-crystals in PU, HBPU and HBPUF. TGA results showed that thermal stabilities of the PU, HBPU, and HBPUF latex films were enhanced in turn. XPS and AFM analyses demonstrated that the fluorine-containing segments from the HBPUF terminals were prone to migrate and enrich on the film-air surface of the HBPUF latex film, which made water contact angle and water absorption of the HBPUF film be as 113.9° and 11.1%, respectively, compared to those of the PU film (77.8° and 136.2%). This research indicates that water resistance of the PU film can be efficiently enhanced by fluorinated polyurethane with novel fluoroalkyl-terminated hyperbranched structure.

  6. Synthesis of Polyurethane Modified Epoxy From Acrylic Polyol with Temperature Variation and Polyurethane Composition

    OpenAIRE

    Triwulandari, Evi; Ghozali, Muhammad

    2013-01-01

    Polyurethane-modified epoxy has been synthesized using acrylic polyol and tolonate as polyurethane component. Epoxy modification process was conducted at 50o, 70o and 90 oC; 10 %, 20 %, 30 %, 40 % (%w/w) polyurethane to epoxy; with solvent and without solvent as well. Characterization of polyurethane-modified epoxy has been done by determining rest of isocyanate to calculate isocyanate conversion level, Fourier Transform- Infra Red (FT-IR) analysis and 1H-Nuclear Magnetic Resonance (1H-NMR). ...

  7. The MDI-Mediated Lateral Crosslinking of Polyurethane Copolymer and the Impact on Tensile Properties and Shape Memory Effect

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Yong Chan; Chung, Hyang Mi [The University of Suwon, Hwasung (Korea, Republic of); Choi, Jae Won; Chun, Byoung Chul [Inje University, Gimhae (Korea, Republic of)

    2012-02-15

    The maximum stress and strain at break remained high and stable after MDI-mediated crosslinking. Similarly, shape recovery and shape retention tests also showed excellent and reproducible results. The MDI-mediated crosslinking was responsible for the interesting tensile and shape memory results. Therefore, it was demonstrated in this investigation that the allophanate type crosslinking, unlike previous misleading information, was possible under the mild reaction conditions. Polyurethane (PU) has long been investigated due to its excellent mechanical properties, shape memory effect, and biocompatibility, and was grafted with pendant functional groups to tailor the polymer characteristics without affecting their basic structure. Actually, polyethyleneglycol has been grafted to polyurethane to improve biocompatibility in biomedical applications, and low temperature flexibility could be improved by the pendant naphthol group grafted to PU. In the field of shape memory polyurethane, mechanical and shape memory properties could be improved by terminal crosslinking with glycerol, pentaerythritol, and dextrin. Alternatively, a flexible crosslinking method was devised to demonstrate both high mechanical strength and shape recovery.

  8. The MDI-Mediated Lateral Crosslinking of Polyurethane Copolymer and the Impact on Tensile Properties and Shape Memory Effect

    International Nuclear Information System (INIS)

    Chung, Yong Chan; Chung, Hyang Mi; Choi, Jae Won; Chun, Byoung Chul

    2012-01-01

    The maximum stress and strain at break remained high and stable after MDI-mediated crosslinking. Similarly, shape recovery and shape retention tests also showed excellent and reproducible results. The MDI-mediated crosslinking was responsible for the interesting tensile and shape memory results. Therefore, it was demonstrated in this investigation that the allophanate type crosslinking, unlike previous misleading information, was possible under the mild reaction conditions. Polyurethane (PU) has long been investigated due to its excellent mechanical properties, shape memory effect, and biocompatibility, and was grafted with pendant functional groups to tailor the polymer characteristics without affecting their basic structure. Actually, polyethyleneglycol has been grafted to polyurethane to improve biocompatibility in biomedical applications, and low temperature flexibility could be improved by the pendant naphthol group grafted to PU. In the field of shape memory polyurethane, mechanical and shape memory properties could be improved by terminal crosslinking with glycerol, pentaerythritol, and dextrin. Alternatively, a flexible crosslinking method was devised to demonstrate both high mechanical strength and shape recovery

  9. Flexible starch-polyurethane films: Physiochemical characteristics and hydrophobicity.

    Science.gov (United States)

    Tai, N L; Adhikari, Raju; Shanks, Robert; Adhikari, Benu

    2017-05-01

    Starch-polyurethane (PU) composite films with improved mechanical and hydrophobic properties were developed in this work. A simple and effective microwave-aided starch gelatinisation instrument was used to prepare glycerol plasticized high amylose starch (HAGS) material. Polyethylene glycol-isocyanate (PEG-iso) linker was prepared by reacting PEG 1000 with hexamethylene diisocyanate (HMDI). PEG-iso linker was then grafted into HAGS forming three dimensional urethane networks (PEG-PU). HAGS-PEG-PU composite blends were prepared and dried at ambient temperature to obtain HAGS-PEG-PU films. The mechanical properties and hydrophobicity (as contact angle, CA) of the HAGS-PEG-PU films were measured and analysed. Fourier transform infrared spectroscopy showed good grafting of PEG-iso into starch structure. Increase of PEG-iso concentration up to 20% (w/w) improved the molecular mixing and interpenetration between the starch and PEG-PU. The HAGS-PEG-PU films had improved hydrophobicity as indicated by CA values ranging from 51 to 110°and very high flexibility as evidenced from elongation at break (ε B ) values from 17 to 1000%. The HAGS-PEG-PU film formulation containing 20% (w/w) PEG-iso provided the best flexibility (ε B >1000%) and hydrophobicity (CA>110°). Copyright © 2017 Elsevier Ltd. All rights reserved.

  10. Thrombocytopenia associated with environmental exposure to polyurethane

    Energy Technology Data Exchange (ETDEWEB)

    Michelson, A.D. (Department of Pediatrics, University of Massachusetts Medical School, Worcester (United States))

    1991-10-01

    Few chemicals in the environment have been implicated as causes of isolated thrombocytopenia, and the evidence is usually less than convincing because the patients were not rechallenged with the chemical in vivo. In the present paper, a child is reported with the onset of thrombocytopenia in temporal association with environmental exposure to polyurethane. Five years after the initial thrombocytopenia had resolved, an inadvertent in vivo rechallenge with environmental polyurethane resulted in recurrence of the thrombocytopenia. This recurrence, together with the fact that only 1-4% of cases of idiopathic thrombocytopenic purpura in children recur, provided strong evidence for a causal role for the polyurethane exposure in this patient's thrombocytopenia. In summary, environmental exposure to polyurethane should be considered in the differential diagnosis of acquired thrombocytopenia in childhood.

  11. Polyurethane Binder Systems for Polymer Bonded Explosives

    National Research Council Canada - National Science Library

    Daniel, Merran A

    2006-01-01

    .... This report details the history of PBX binders, components of polyurethane binder systems, their properties and the procedures for obtaining the ingredients, as well as the basics of formulation...

  12. Modeling Decomposition of Unconfined Rigid Polyurethane Foam

    National Research Council Canada - National Science Library

    Hobbs, Michael

    1999-01-01

    The decomposition of unconfined rigid polyurethane foam has been modeled by a kinetic bond-breaking scheme describing degradation of a primary polymer and formation of a thermally stable secondary polymer...

  13. Flame Retardants Used in Flexible Polyurethane Foam

    Science.gov (United States)

    The partnership project on flame retardants in furniture seeks to update the health and environmental profiles of flame-retardant chemicals that meet fire safety standards for upholstered consumer products with polyurethane foam

  14. Posthuman blues

    CERN Document Server

    Tonnies, Mac

    2013-01-01

    Posthuman Blues, Vol. I is first volume of the edited version of the popular weblog maintained by author Mac Tonnies from 2003 until his tragic death in 2009. Tonnies' blog was a pastiche of his original fiction, reflections on his day-to-day life, trenchant observations of current events, and thoughts on an eclectic range of material he culled from the Internet. What resulted was a remarkably broad portrait of a thoughtful man and the complex times in which he lived, rendered with intellige...

  15. Silicone on Blending Vegetal Petrochemical Based Polyurethane

    OpenAIRE

    Flora E. Firdaus

    2010-01-01

    Polyurethane foam (PUF) is formed by a chemical reaction of polyol and isocyanate. The aim is to understand the impact of Silicone on synthesizing polyurethane in differentiate volume of molding. The method used was one step process, which is simultaneously caried out a blending polyol (petroleum polyol and soybean polyol), a TDI (2,4):MDI (4,4-) (80:20), a distilled water, and a silicone. The properties of the material were measured via a number of parameters, which are ...

  16. POLYURETHANE COMPOSITES AS DRUG CARRIERS:: RELEASE PATTERNS

    Directory of Open Access Journals (Sweden)

    M. V. Grigoreva

    2013-10-01

    Full Text Available Biodegradable polyurethanes attract interest of those developing composite materials for biomedical applications. One of their features is their ability to serve as carriers, or matrixes, for medicines and other bioactive compounds to produce a therapeutic effect in body through targeted and/or prolonged delivery of these compounds in the process of their controlled release from matrix. The review presents polyurethane composites as matrices for a number of drugs. The relation between structure of the composites and their degradability both in vitro and in vivo and the dependence of drug release kinetics on physicochemical properties of polyurethane matrix are highlighted. The release of drugs (cefazolin, naltrexone and piroxicam from the composites based on cross-linked polyurethanes (synthesized from laprols, Mw between 1,500 and 2,000 Da and toluylene diisocyanate demonstrated more or less the same pattern (about 10 days in vitro and three to five days in vivo. In contrast, the composites with dioxydine based on a linear polyurethanes (synthesized from oligotetramethilene glycol, Mw 1,000 Da, diphenylmethane-4,4’-diisocyanate and 1,4-butanediol retained their antimicrobial activity at least 30 days. They also showed a significantly higher breaking strength as compared to that of the composites based on cross-linked polyurethanes.

  17. Mechanical and morphological characterization of a bio-nanocomposite hydroxyapatite / polyurethane

    International Nuclear Information System (INIS)

    Andrade, Sabina da Memoria Cardoso de; Dias, Carmen Gilda Barroso Tavares; Zavaglia, Cecilia Amelia de Carvalho

    2011-01-01

    Nanocomposites based on biocompatible polymers and hydroxyapatite are wide acceptance as bone grafts, the composition, structure and similarity to natural bone and also due to the properties functional, such as surface and mechanical strength. This work there was the making of a bionanocomposite, using nanostructured hydroxyapatite interconnected by polyurethane, generated from the actions of poly(vinylalcohol) and toluene isocyanate HDT. The formation kinetics was monitored by the bionanocomposite spectroscopy and Fourier transform infrared FTIR. The material showed good properties both mechanical and morphology. (author)

  18. Biological Evaluation of Flexible Polyurethane/Poly l-Lactic Acid Composite Scaffold as a Potential Filler for Bone Regeneration

    Directory of Open Access Journals (Sweden)

    Yuk Fai Lui

    2017-09-01

    Full Text Available Degradable bone graft substitute for large-volume bone defects is a continuously developing field in orthopedics. With the advance in biomaterial in past decades, a wide range of new materials has been investigated for their potential in this application. When compared to common biopolymers within the field such as PLA or PCL, elastomers such as polyurethane offer some unique advantages in terms of flexibility. In cases of bone defect treatments, a flexible soft filler can help to establish an intimate contact with surrounding bones to provide a stable bone-material interface for cell proliferation and ingrowth of tissue. In this study, a porous filler based on segmented polyurethane incorporated with poly l-lactic acid was synthesized by a phase inverse salt leaching method. The filler was put through in vitro and in vivo tests to evaluate its potential in acting as a bone graft substitute for critical-sized bone defects. In vitro results indicated there was a major improvement in biological response, including cell attachment, proliferation and alkaline phosphatase expression for osteoblast-like cells when seeded on the composite material compared to unmodified polyurethane. In vivo evaluation on a critical-sized defect model of New Zealand White (NZW rabbit indicated there was bone ingrowth along the defect area with the introduction of the new filler. A tight interface formed between bone and filler, with osteogenic cells proliferating on the surface. The result suggested polyurethane/poly l-lactic acid composite is a material with the potential to act as a bone graft substitute for orthopedics application.

  19. AUTOCLAVABLE HIGHLY CROSS-LINKED POLYURETHANE NETWORKS IN OPHTHALMOLOGY

    NARCIS (Netherlands)

    BRUIN, P; MEEUWSEN, EAJ; VANANDEL, MV; WORST, JGF; PENNINGS, AJ

    1993-01-01

    Highly cross-linked aliphatic polyurethane networks have been prepared by the bulk step reaction of low molecular weight polyols and hexamethylenediisocyanate (HDI). These polyurethane networks are optically transparent, colourless and autoclavable amorphous glassy thermosets, which are suited for

  20. Plasma mediated protein immobilisation enhances the vascular compatibility of polyurethane with tissue matched mechanical properties.

    Science.gov (United States)

    Kondyurina, Irina; Wise, Steven G; Ngo, Alan K Y; Filipe, Elysse C; Kondyurin, Alexey; Weiss, Anthony S; Bao, Shisan; Bilek, Marcela M M

    2017-07-04

    Polyurethanes are a diverse class of polymers, with independently tunable mechanical and biodegradation properties making them a versatile platform material for biomedical implants. Previous iterations have failed to adequately embody appropriate mechanical and biological properties, particularly for vascular medicine where strength, compliance and multifaceted biocompatibility are required. We have synthesized a new polyurethane formulation with finely tuned mechanical properties, combining high strength and extensibility with a low Young's modulus. Additional cross-linking during synthesis enhanced stability and limits leaching. Under cyclic testing, hysteresis was minimal following completion of the initial cycles, indicating the robustness of the material. Building on this platform, we used plasma immersion ion implantation to activate the polymer surface and functionalized it with recombinant human tropoelastin. With tropoelastin covalently bound to the surface, human coronary endothelial cells showed improved attachment and proliferation. In the presence of heparinized whole blood, tropoelastin-coated polyurethane showed very low thrombogenicity in both static and flow conditions. Using this formulation, we synthesized robust, elastic prototype conduits which easily retained multiple sutures and were successfully implanted in a pilot rat aortic interposition model. We have thus created an elastic, strong biomaterial platform, functionalized with an important regulator of vascular biology, with the potential for further evaluation as a new synthetic graft material.

  1. 40 CFR 721.9959 - Polyurethane polymer (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Polyurethane polymer (generic). 721... Substances § 721.9959 Polyurethane polymer (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as a polyurethane polymer (PMN P-01...

  2. Influence of polyols on properties of bio-based polyurethanes

    Indian Academy of Sciences (India)

    when compared to the other two polyurethanes PU–PP1 and. PU–PP2. The activation energy (Ea), which is a quantitative mea- sure of thermal stability, associated with each stage of. Table 4. Thermogravimetric analysis data of polyurethanes. Polyurethane. Weight loss at various temperatures (%). Char residue (%) code.

  3. High Strain Rate Compressive Behavior of Polyurethane Resin and Polyurethane/Al2O3 Hollow Sphere Syntactic Foams

    Directory of Open Access Journals (Sweden)

    Dung D. Luong

    2014-01-01

    Full Text Available Polyurethane resins and foams are finding extensive applications. Seat cushions and covers in automobiles are examples of these materials. In the present work, hollow alumina particles are used as fillers in polyurethane resin to develop closed-cell syntactic foams. The fabricated syntactic foams are tested for compressive properties at quasistatic and high strain rates. Strain rate sensitivity is an important concern for automotive applications due to the possibility of crash at high speeds. Both the polyurethane resin and the syntactic foam show strain rate sensitivity in compressive strength. It is observed that the compressive strength increases with strain rate. The energy absorbed up to 10% strain in the quasistatic regime is 400% higher for the syntactic foam in comparison to that of neat resin at the same strain rate.

  4. Performance of supercritical methanol in polyurethane degradation

    Directory of Open Access Journals (Sweden)

    Liu Lu

    2016-01-01

    Full Text Available Polyurethane is a group of block copolymer which is composed of diisocyanate, chain extender, and polyol, including polyurethane foam, polyurethane elastomer, waterborne polyurethane, etc. This research focused on thermoplastic polyurethane elastomer (TPU which is formed with 4,4’-diphenylmethane diisocyanate (MDI, poly(1,4-butanediol-hexanedioic acid diolpolyester(PBA and extended with 1,4-butanediol(BDO.The degradation of TPU was carried out with the help of methanol as the supercritical solvent. The SEM of the reaction residues revealed the process of the depolymerisation. The products were measured by GC-MS and found out to be PBA, BDO and 4,4’-methylene diphenyl carbamate(MDC which is themethylate of MDI.GC-FID, HPLC-UV and GPC were used to further analysis. The experimental results showed that supercritical methanol performed outstandingly in TPU recycling, it needed lower temperature and shorter time than regular methods. At 230°C/70min, over 90% raw materials of TPU could be recovered.

  5. Pullout strength of bone-patellar tendon-bone allograft bone plugs: a comparison of cadaver tibia and rigid polyurethane foam.

    Science.gov (United States)

    Barber, F Alan

    2013-09-01

    To compare the load-to-failure pullout strength of bone-patellar tendon-bone (BPTB) allografts in human cadaver tibias and rigid polyurethane foam blocks. Twenty BPTB allografts were trimmed creating 25 mm × 10 mm × 10 mm tibial plugs. Ten-millimeter tunnels were drilled in 10 human cadaver tibias and 10 rigid polyurethane foam blocks. The BPTB anterior cruciate ligament allografts were inserted into these tunnels and secured with metal interference screws, with placement of 10 of each type in each material. After preloading (10 N), cyclic loading (500 cycles, 10 to 150 N at 200 mm/min) and load-to-failure testing (200 mm/min) were performed. The endpoints were ultimate failure load, cyclic loading elongation, and failure mode. No difference in ultimate failure load existed between grafts inserted into rigid polyurethane foam blocks (705 N) and those in cadaver tibias (669 N) (P = .69). The mean rigid polyurethane foam block elongation (0.211 mm) was less than that in tibial bone (0.470 mm) (P = .038), with a smaller standard deviation (0.07 mm for foam) than tibial bone (0.34 mm). All BPTB grafts successfully completed 500 cycles. The rigid polyurethane foam block showed less variation in test results than human cadaver tibias. Rigid polyurethane foam blocks provide an acceptable substitute for human cadaver bone tibia for biomechanical testing of BPTB allografts and offer near-equivalent results. Copyright © 2013 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

  6. Polyurethane Production from Waste Bale Fibers

    Directory of Open Access Journals (Sweden)

    İbrahim BİLİCİ

    2017-12-01

    Full Text Available Nowadays, the methods of eliminating the pollution from wastes of the materials produced as much as the production methods are important. This requires efficiently use of sources economical and ecologically. Polyester based polymers, which is one of the most important consumed plastic materials in the world, have lots of number of recycling methods. Basically it is called chemical and physical recycling. Chemical recycle methods include glycolysis, aminolysis, methanolysis, hydrolysis and etc.. In this study aromatic polyester polyols produced from bale fiber wastes via glycolysis method. Zinc Acetate used as a catalysts and diethylene glycol used for the glycolysis reaction and moiety of glycol investigated as an experimental parameter. Polyurethane material produced via obtained polyol and TDI (Toluene di Isocyanate reaction. Obtained polyurethane material investigated via FTIR and TGA and compared with the commercial polyurethane. As a result, it has been decided that glycolysis is usable and applicable method for the waste bale fibers.

  7. Enhancement of antibacterial properties of polyurethanes by chitosan and heparin immobilization

    Energy Technology Data Exchange (ETDEWEB)

    Kara, Filiz [Department of Chemistry, Faculty of Science, Gazi University, 06500 Ankara (Turkey); Aksoy, E. Ayse [Department of Basic Pharmaceutical Sciences, Faculty of Pharmacy, Hacettepe University, 06100 Ankara (Turkey); Yuksekdag, Zehranur [Biotechnology Laboratory, Department of Biology, Faculty of Science, Gazi University, 06500 Ankara (Turkey); Aksoy, Serpil [Department of Chemistry, Faculty of Science, Gazi University, 06500 Ankara (Turkey); Hasirci, Nesrin, E-mail: nhasirci@metu.edu.tr [BIOMATEN, Center of Excellence in Biomaterials and Tissue Engineering, Middle East Technical University, 06800 Ankara (Turkey); Department of Chemistry, Faculty of Arts and Sciences, Middle East Technical University, 06800 Ankara (Turkey)

    2015-12-01

    Graphical abstract: - Highlights: • Polyurethane elastomer was synthesized in medical purity. • Chitosan (CH) and heparin (Hep) were immobilized on polyurethane films. • Modification with CH and Hep increased hydrophilicity and surface free energy. • Immobilized films had high antibacterial activity against four bacteria. • Bacterial adhesion significantly decreased on the modified surfaces. - Abstract: Being antibacterial is a required property for the materials used in medical devices and instruments. Polyurethanes (PUs) are one class of polymers widely used in the production of devices that especially come in contact with blood (e.g. heart valves, blood vessels, vascular grafts and catheters). In this study, hexamethylene diisocyanate based polyurethanes (PUh) were synthesized and antibacterial and anti-adhesive properties were added by immobilizing chitosan (CH) and heparin (Hep) on the samples of PUh via a stepwise process. Chemistry and topography of the modified film samples (PUh-CH and PUh-CH-Hep) were examined by Fourier Transform Infrared Spectrophotometry-Attenuated Total Reflectance (FTIR-ATR), Electron Spectroscopy for Chemical Analysis (ESCA) and Atomic Force Microscopy (AFM), and surface free energy (SFE) values after each step were determined by goniometer. PUh-CH and PUh-CH-Hep samples were found to be antibacterial against Staphylococcus aureus (S. aureus) and Staphylococcus epidermidis (S. epidermidis) (both Gram positive) and Escherichia coli (E. coli) and Pseudomonas aeruginosa (P. aeruginosa) (both Gram negative) bacteria, and bacterial adhesion results showed a significant decrease in the number of viable bacteria on both modified samples where PUh-CH-Hep was the most effective. The findings of this study show that polymeric surfaces can be effectively modified and converted to be antibacterial by chitosan and heparin immobilization, and presence of both chemicals enhance efficacy against bacteria.

  8. Polyurethane/polymeric N-halamine antimicrobial and biofilm controlling semi-interpenetrating polymer network

    Science.gov (United States)

    Xiu, Kemao

    Bacterial infection and biofilm formation cause serious medical, industrial, and environmental problems. In biomedical applications, bacterial contamination of medical devices often leads to infectious diseases accompanied with pain, suffer, and even death. Polyurethane (PU) is widely in biomedical applications due to its good mechanical properties and biocompatibility. However, its vulnerability to bacterial biofilm formation seriously limits its wider uses. Prior studies have shown that N-halamines could be incorporated into PU to achieve antimicrobial and biofilm-controlling effects through grafting, blending, and/or coating. To broaden the selection of modification methods in the development antimicrobial PU, this study synthesized polyurethane/polymeric N-halamine semi-interpenetrating polymer networks (semi-IPN). Polymerizable monomeric N-halamines were swollen into PU with initiators and crosslink agents. Post polymerization of the monomers led to the formation of semi-IPN with linear PU and N-halamine polymer networks. The semi-IPNs showed excellent antimicrobial and biofilm controlling ability towards both gram-positive and gram-negative bacteria. The effects of hydrophilicity, surface grafted N-halamine and structural characteristics of N-halamine on the antimicrobial behavior of the resulting semi-IPNs were also investigated.

  9. Research of Customized Aortic Stent Graft Manufacture

    Science.gov (United States)

    Zhang, Lei; Chen, Xin; Liu, Muhan

    2017-03-01

    Thoracic descending aorta diseases include aortic dissection and aortic aneurysm, of which the natural mortality rate is extremely high. At present, endovascular aneurysm repair (EVAR) has been widely used as an effective means for the treatment of descending aortic disease. Most of the existing coating stents are standard design, which are unable to meet the size or structure of different patients. As a result, failure of treatment would be caused by dimensional discrepancy between stent and vessels, which could lead to internal leakage or rupture of blood vessels. Therefore, based on rapid prototyping sacrificial core - coating forming (RPSC-CF), a customized aortic stent graft manufactured technique has been proposed in this study. The aortic stent graft consists of film and metallic stent, so polyether polyurethane (PU) and nickel-titanium (NiTi) shape memory alloy with good biocompatibility were chosen. To minimum film thickness without degrading performance, effect of different dip coating conditions on the thickness of film were studied. To make the NiTi alloy exhibit super-elasticity at body temperature (37°C), influence of different heat treatment conditions on austenite transformation temperature (Af) and mechanical properties were studied. The results show that the customized stent grafts could meet the demand of personalized therapy, and have good performance in blasting pressure and radial support force, laying the foundation for further animal experiment and clinical experiment.

  10. Biobased polyurethanes prepared from different vegetable oils.

    Science.gov (United States)

    Zhang, Chaoqun; Madbouly, Samy A; Kessler, Michael R

    2015-01-21

    In this study, a series of biobased polyols were prepared from olive, canola, grape seed, linseed, and castor oil using a novel, solvent/catalyst-free synthetic method. The biobased triglyceride oils were first oxidized into epoxidized vegetable oils with formic acid and hydrogen peroxide, followed by ring-opening reaction with castor oil fatty acid. The molecular structures of the polyols and the resulting polyurethane were characterized. The effects of cross-linking density and the structures of polyols on the thermal, mechanical, and shape memory properties of the polyurethanes were also investigated.

  11. Bone grafting: An overview

    Directory of Open Access Journals (Sweden)

    D. O. Joshi

    2010-08-01

    Full Text Available Bone grafting is the process by which bone is transferred from a source (donor to site (recipient. Due to trauma from accidents by speedy vehicles, falling down from height or gunshot injury particularly in human being, acquired or developmental diseases like rickets, congenital defects like abnormal bone development, wearing out because of age and overuse; lead to bone loss and to replace the loss we need the bone grafting. Osteogenesis, osteoinduction, osteoconduction, mechanical supports are the four basic mechanisms of bone graft. Bone graft can be harvested from the iliac crest, proximal tibia, proximal humerus, proximal femur, ribs and sternum. An ideal bone graft material is biologically inert, source of osteogenic, act as a mechanical support, readily available, easily adaptable in terms of size, shape, length and replaced by the host bone. Except blood, bone is grafted with greater frequency. Bone graft indicated for variety of orthopedic abnormalities, comminuted fractures, delayed unions, non-unions, arthrodesis and osteomyelitis. Bone graft can be harvested from the iliac crest, proximal tibia, proximal humerus, proximal femur, ribs and sternum. By adopting different procedure of graft preservation its antigenicity can be minimized. The concept of bone banking for obtaining bone grafts and implants is very useful for clinical application. Absolute stability require for successful incorporation. Ideal bone graft must possess osteogenic, osteoinductive and osteocon-ductive properties. Cancellous bone graft is superior to cortical bone graft. Usually autologous cancellous bone graft are used as fresh grafts where as allografts are employed as an alloimplant. None of the available type of bone grafts possesses all these properties therefore, a single type of graft cannot be recomm-ended for all types of orthopedic abnormalities. Bone grafts and implants can be selected as per clinical problems, the equipments available and preference of

  12. Study of polyurethanes ageing offshore

    Energy Technology Data Exchange (ETDEWEB)

    Aquino, Fabio G.; Sheldrake, Terry; Clevelario, Judimar; Pires, Fabio [Wellstream International, Panama City, FL (United States); Coutinho, Fernanda M.B. [Universidade do Estado do Rio de Janeiro (UERJ), RJ (Brazil)

    2008-07-01

    The oil industry is one of the sectors with the highest number of production systems employing high technology. Brazil is worldwide renowned as a leader in oil and gas extraction in deep and ultra deep water. Inside the production chain, a great part the oil and gas produced is conveyed through flexible pipelines that connect the production wells to the platforms. There are two segments of these lines that receive different names according to their application characteristics. When the pipes are laid on the seabed in a static service condition, are called Flow lines and when they raise from the seabed to the platform in a dynamic service condition, are called Risers. The pipes designed for dynamic applications are equipped with Bend Stiffeners, components with conical form and in general with urethane basis, which has the function of providing a smooth stiffness transition between the flexible structure of the pipes and an extremely rigid structure, the platform, not allowing that this component infringes their minimum operation Bend Radius. According to Caire, the proper compression of curvature stiffeners and the material used in its manufacture is becoming increasingly important in industry due to its growing use and the occurrence of failures that have been recorded in recent years. This paper discusses the changes in the mechanical properties of polyurethanes by the hydrolysis during accelerated ageing, reaction of water with functional groups of the polymer chain, as well as mass variation, considering that these materials are designed for a service life exceeding twenty years for operation in water. (author)

  13. [Anaphylaxis to blue dyes].

    Science.gov (United States)

    Langner-Viviani, F; Chappuis, S; Bergmann, M M; Ribi, C

    2014-04-16

    In medicine, vital blue dyes are mainly used for the evaluation of sentinel lymph nodes in oncologic surgery. Perioperative anaphylaxis to blue dyes is a rare but significant complication. Allergic reactions to blue dyes are supposedly IgE-mediated and mainly caused by triarylmethanes (patent blue and isosulfane blue) and less frequently by methylene blue. These substances usually do not feature on the anesthesia record and should not be omitted from the list of suspects having caused the perioperative reaction, in the same manner as latex and chlorhexidine. The diagnosis of hypersensitivity to vital blue dyes can be established by skin test. We illustrate this topic with three clinical cases.

  14. Preparation and antifouling property of polyurethane film modified by chondroitin sulfate

    Science.gov (United States)

    Yuan, Huihui; Xue, Jing; Qian, Bin; Chen, Huaying; Zhu, Yonggang; Lan, Minbo

    2017-02-01

    An antifouling polyurethane film modified by chondroitin sulfate (PU-CS) was prepared by chemical grafting with N-Boc-1,3-propanediamine as a spacer. The different mass fraction of N-Boc-1,3-propanediamine was investigated to obtain PU-CS films with different CS grafting density. The surface properties of PU-CS films were comprehensively characterized. Proteins adsorption and glycosaminoglycans adhesion on films were evaluated. Moreover, inorganic salt deposition on film with highest CS grafting density (3.70 μg/cm2) was briefly investigated. The results showed that the increase of CS grafting density improved not only the hydrophilicity but the antifouling performance of films. The best antifouling film reduced the adsorption of fibrinogen (BFG), human serum albumin (HSA) and lysozyme (LYS) by 81.4%, 95.0% and 76.5%, respectively, and the adhesion of chondroitin (CS), heparin (HP) and hyaluronic acid (HA) by 70.6%, 87.4% and 81.3%, respectively. In addition, the co-adsorption of proteins and glycosaminoglycans reduced up to 86.9% and 75.5%, respectively. Changes in inorganic salt deposition after co-adsorption of proteins and glycosaminoglycans on PU-CS(3) suggested that the proteins promoted the inorganic salt deposition, while glycosaminoglycans inhibited the crystal growth. The negatively charged polysaccharides might promote the generation of smaller crystals which could be conducive to provide theoretical and practical guide to develop novel urinary stents with significant anti-encrustation properties.

  15. Preparation and characterization of polyvinyl alcohol hydrogels crosslinked by biodegradable polyurethane for tissue engineering of cartilage

    International Nuclear Information System (INIS)

    Bonakdar, Shahin; Emami, Shahriar Hojjati; Shokrgozar, Mohammad Ali; Farhadi, Afshin; Ahmadi, Seyed Amir Hoshiar; Amanzadeh, Amir

    2010-01-01

    Polyurethane was prepared from hexamethylene diisocyanate (HMDI) and polycaprolactone diol (PCL) with stoichiometry ratio of two in a reactor to form prepolymer. Polyvinyl alcohol (PVA) at PVA/prepolymer ratios of 8, 4, 2 and 1 was crosslinked with the former degradable polyester polyurethane. Fourier transform infrared (FTIR) was employed to confirm polyurethane formation during the course of reactions. FTIR spectrum revealed bands at 1729-1733 cm -1 and 3347-3340 cm -1 which indicates carbonyl and NH of amine groups, respectively. Polyurethane formation was also confirmed by the absence of the isocyanate peaks (NCO) at 2270 cm -1 . Dynamic mechanical thermal analysis (DMTA) showed that by increasing prepolymer concentration glass transition temperature decreases from 26 deg. C for PVA to 19 deg. C for sample with PVA/prepolymer ratio of 4 and then it rises up to 31 deg. C. Water uptake measurements illustrated about four fold reduction in swelling ratio of PVA after crosslinking and the sample with equal amounts of PVA and PPU had water uptake of 100%, close to that of a natural cartilage and much less than PVA (425%). All samples had compressive modulus in the range of the articular cartilage (1.9-14.4 MPa). The morphology of the isolated cells on the samples was evaluated by scanning electron microscopy (SEM) and revealed cell attachment and proliferation. The cell viability (3-4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide, MTT) and GAG expression (dimethylmethylene blue, DMMB) assays with human chondrocytes on the sample with PVA/prepolymer ratio of one showed about 14 and 33% increase in cell viability and GAG expression after 14 days of culture compare to the PVA, respectively.

  16. Nonwoven glass fiber mat reinforces polyurethane adhesive

    Science.gov (United States)

    Roseland, L. M.

    1967-01-01

    Nonwoven glass fiber mat reinforces the adhesive properties of a polyurethane adhesive that fastens hardware to exterior surfaces of aluminum tanks. The mat is embedded in the uncured adhesive. It ensures good control of the bond line and increases the peel strength.

  17. Development of Lignin-Based Polyurethane Thermoplastics

    Energy Technology Data Exchange (ETDEWEB)

    Saito, Tomonori [ORNL; Perkins, Joshua H [ORNL; Jackson, Daniel C [ORNL; Trammell, Neil E [ORNL; Hunt, Marcus A [ORNL; Naskar, Amit K [ORNL

    2013-01-01

    In our continued effort to develop value-added thermoplastics from lignin, here we report utilizing a tailored feedstock to synthesize mechanically robust thermoplastic polyurethanes at very high lignin contents (75 65 wt %). The molecular weight and glass transition temperature (Tg) of lignin were altered through cross-linking with formaldehyde. The cross-linked lignin was coupled with diisocyanate-based telechelic polybutadiene as a network-forming soft segment. The appearance of two Tg s, around 35 and 154 C, for the polyurethanes indicates the existence of two-phase morphology, a characteristic of thermoplastic copolymers. A calculated Flory-Huggins interaction parameter of 7.71 also suggests phase immiscibility in the synthesized lignin polyurethanes. An increase in lignin loading increased the modulus, and an increase in crosslink-density increased the modulus in the rubbery plateau region of the thermoplastic. This path for synthesis of novel lignin-based polyurethane thermoplastics provides a design tool for high performance lignin-based biopolymers.

  18. The reactive extrusion of thermoplastic polyurethane

    NARCIS (Netherlands)

    Verhoeven, Vincent Wilhelmus Andreas

    2006-01-01

    The objective of this thesis was to increase the understanding of the reactive extrusion of thermoplastic polyurethane. Overall, several issues were identified: • Using a relative simple extrusion model, the reactive extrusion process can be described. This model can be used to further investigate

  19. Measuring Rind Thickness on Polyurethane Foam

    Science.gov (United States)

    Johnson, C.; Miller, J.; Brown, H.

    1985-01-01

    Nondestructive test determines rind thickness of polyurethane foam. Surface harness of foam measured by Shore durometer method: hardness on Shore D scale correlates well with rind thickness. Shore D hardness of 20, for example, indicates rind thickness of 0.04 inch (1 millimeter). New hardness test makes it easy to determine rind thickness of sample nondestructively and to adjust fabrication variables accordingly.

  20. Comparison of environmentally friendly, selective polyurethane catalysts

    Czech Academy of Sciences Publication Activity Database

    Strachota, Adam; Strachotová, Beata; Špírková, Milena

    2008-01-01

    Roč. 23, č. 6 (2008), s. 566-570 ISSN 1042-6914 R&D Projects: GA MPO FT-TA3/034 Institutional research plan: CEZ:AV0Z40500505 Keywords : amine catalyst * foam * gelation * kinetics * polyurethane Subject RIV: CD - Macromolecular Chemistry Impact factor: 0.706, year: 2008

  1. Polyurethane elastomers made from linear polybutadiene diols

    Czech Academy of Sciences Publication Activity Database

    Špírková, Milena

    2002-01-01

    Roč. 85, č. 1 (2002), s. 84-91 ISSN 0021-8995 R&D Projects: GA AV ČR KSK2050602 Institutional research plan: CEZ:AV0Z4050913 Keywords : polyurethanes * polybutadiene diol * isocyanurate groups Subject RIV: CD - Macromolecular Chemistry Impact factor: 0.927, year: 2002

  2. Flexible optical fiber sensor based on polyurethane

    DEFF Research Database (Denmark)

    Kaysir, Md Rejvi; Stefani, Alessio; Lwin, Richard

    Polyurethane (PU) based hollow core fibers are investigated as optical sensors. The flexibility of PU fibers makes it suitable for sensing mechanical perturbations. We fabricated a PU fiber using the fiber drawing method, characterized the fiber and experimentally demonstrated a simple way...

  3. Thermal Expansion of Polyurethane Foam

    Science.gov (United States)

    Lerch, Bradley A.; Sullivan, Roy M.

    2006-01-01

    Closed cell foams are often used for thermal insulation. In the case of the Space Shuttle, the External Tank uses several thermal protection systems to maintain the temperature of the cryogenic fuels. A few of these systems are polyurethane, closed cell foams. In an attempt to better understand the foam behavior on the tank, we are in the process of developing and improving thermal-mechanical models for the foams. These models will start at the microstructural level and progress to the overall structural behavior of the foams on the tank. One of the key properties for model characterization and verification is thermal expansion. Since the foam is not a material, but a structure, the modeling of the expansion is complex. It is also exacerbated by the anisoptropy of the material. During the spraying and foaming process, the cells become elongated in the rise direction and this imparts different properties in the rise direction than in the transverse directions. Our approach is to treat the foam as a two part structure consisting of the polymeric cell structure and the gas inside the cells. The polymeric skeleton has a thermal expansion of its own which is derived from the basic polymer chemistry. However, a major contributor to the thermal expansion is the volume change associated with the gas inside of the closed cells. As this gas expands it exerts pressure on the cell walls and changes the shape and size of the cells. The amount that this occurs depends on the elastic and viscoplastic properties of the polymer skeleton. The more compliant the polymeric skeleton, the more influence the gas pressure has on the expansion. An additional influence on the expansion process is that the polymeric skeleton begins to breakdown at elevated temperatures and releases additional gas species into the cell interiors, adding to the gas pressure. The fact that this is such a complex process makes thermal expansion ideal for testing the models. This report focuses on the thermal

  4. Biodegradable polyurethane nanocomposites containing dexamethasone for ocular route

    International Nuclear Information System (INIS)

    Rodrigues da Silva, Gisele; Silva-Cunha, Armando da; Behar-Cohen, Francine; Ayres, Eliane; Orefice, Rodrigo L.

    2011-01-01

    The treatment of posterior segment ocular diseases, such as uveitis, by using eye drops and oral drugs is usually not effective due to the body's natural barriers to drug penetration. In this study, ocular implants to treat uveitis were synthesized by incorporating dexamethasone acetate, an important type of corticoid used in the treatment of some uveitis, into a biodegradable polyurethane containi clay nanoparticles. Biodegradable polyurethane nanocomposites having poly(caprolactone) oligomers as soft segments were obtained by delaminating clay particles within a polyurethane aqueous dispersion. The drug was incorporated into the polymer by dispersing it in the waterborne polyurethane followed by a drying step. Nanoparticles derived from clay were demonstrated to be able to tailor the mechanical properties of polyurethanes to achieve values that can match the properties of ocular soft tissues. Infrared spectra (FTIR) showed that the presence of clay particles was able to change the microphase separation process typical of polyurethanes. X-ray diffraction and small angle x-ray scattering (SAXS) results were explored to show that the incorporation of both dexamethasone acetate and nanocomponents derived from clay led to a less defined two-phase polyurethane. The presence of clay nanoparticles increased the rate of drug release measured in vitro. Human retinal pigment epithelial cells (ARPE-19) were cultured in contact with polyurethanes and polyurethane nanocomposites, and the viability of them (evaluated by using MTT assay after 7 days) showed that no toxic components were released from polyurethanes containing no drugs during the test.

  5. Grafting and curing

    International Nuclear Information System (INIS)

    Garnett, J.L.; Loo-Teck Ng; Visay Viengkhou

    1998-01-01

    Progress in radiation grafting and curing is briefly reviewed. The two processes are shown to be mechanistically related. The parameters influencing yields are examined particularly for grafting. For ionising radiation grafting systems (EB and gamma ray) these include solvents, substrate and monomer structure, dose and dose-rate, temperature and more recently role of additives. In addition, for UV grafting, the significance of photoinitiators is discussed. Current applications of radiation grafting and curing are outlined. The recent development of photoinitiator free grafting and curing is examined as well as the potential for the new excimer laser sources. The future application of both grafting and curing is considered, especially the significance of the occurrence of concurrent grafting during cure and its relevance in environmental considerations

  6. Pixel Grafting: An Evolution of Mincing for Transplantation of Full-Thickness Wounds.

    Science.gov (United States)

    Singh, Mansher; Nuutila, Kristo; Kruse, Carla; Dermietzel, Alexander; Caterson, E J; Eriksson, Elof

    2016-01-01

    Split-thickness skin grafting is the gold standard for treatment of major skin loss. This technique is limited by donor-site availability in large burn injuries. With micrografting, a technique where split-thickness skin graft is minced into 0.8 × 0.8-mm pieces, the authors have demonstrated an expansion ratio of 1:100 and healing comparable to that achieved with split-thickness skin grafting. In this study, the authors explore the regenerative potential of a skin graft by cutting split-thickness skin grafts to pixel size (0.3 × 0.3 mm) grafts. Wound healing was studied in full-thickness wounds in a porcine model by creating an incubator-like microenvironment using polyurethane wound chambers. Multiple wound healing parameters were used to study the outcome of pixel grafting and compare it to micrografting and nontransplanted wounds. The authors' results show that 0.3 × 0.3-mm pixel grafts remain viable and contribute to skin regeneration. The pixel graft-transplanted wounds demonstrated a faster reepithelialization rate, decreased wound contraction, and increased mechanical stability compared with nontransplanted wounds. The reepithelialization rates of the wounds were significantly increased with pixel grafting at day 6 after wounding compared with micrografting. Among the other wound healing parameters, there were no significant differences between wounds transplanted with pixel grafts and micrografts. Pixel grafting technique would address the most commonly encountered limitations of the split-thickness skin graft with the possibility of an even larger expansion ratio than micrografting. This technique is simple and fast and can be conducted in the operating room or in the clinic.

  7. Bone grafts in dentistry

    Directory of Open Access Journals (Sweden)

    Prasanna Kumar

    2013-01-01

    Full Text Available Bone grafts are used as a filler and scaffold to facilitate bone formation and promote wound healing. These grafts are bioresorbable and have no antigen-antibody reaction. These bone grafts act as a mineral reservoir which induces new bone formation.

  8. Synthesis of polystyrene coated SiC nanowires as fillers in a polyurethane matrix for electromechanical conversion

    Science.gov (United States)

    Rybak, Andrzej; Warde, Micheline; Beyou, Emmanuel; Chaumont, Philippe; Bechelany, Mikhael; Brioude, Arnaud; Toury, Bérangère; Cornu, David; Miele, Philippe; Guiffard, Benoit; Seveyrat, Laurence; Guyomar, Daniel

    2010-04-01

    Grafting of polystyrene (PS) from silica coating of silicon carbide nanowires (SiCNWs) has been performed by a two-step nitroxide mediated free radical polymerization (NMP) of styrene. First, an alkoxyamine based on N-tert-butyl-N-(1-diethylphosphono-2,2-dimethylpropyl) nitroxide (DEPN) was covalently attached onto NWs through free surface silanol groups. To immobilize the alkoxyamine initiator on the silica surface, alkoxylamine was formed in situ by the simultaneous reaction of polymerizable acryloxy propyl trimethoxysilane (APTMS), azobis isobutyronitrile (AIBN), and DEPN, which was used as a radical trap. Polystyrene chains with controlled molecular weights and narrow polydispersity were then grown from the alkoxyamine-functionalized NWs surface in the presence of a 'free' sacrificial styrylDEPN alkoxyamine. Both the initiator and polystyrene chains were characterized by FTIR and 13C solid-state NMR and quantified by TGA. Ensuing nanocomposites were characterized by FEG-SEM, TEM and Raman spectroscopy. EDX analysis performed on functionalized nanowires during FEG-SEM analysis also gave evidence of grafting by a strong increase in the average C/Si atomic ratio. Incorporation of 2 wt% NWs into the polyurethane (PU) matrix has been carried out to prepare homogeneous nanocomposite films. The electric field induced thickness strain response has been investigated for the polystyrene-grafted silica coated SiC NWs (PU-SiC@SiO2@PS) nanocomposites and compared to pure polyurethane film and PU-SiC@SiO2 nanocomposite without polystyrene grafting. At a moderate electric field of 10 V µm - 1, SiC@SiO2@PS loading increased the strain level of pure PU by a factor of 2.2. This improvement came partially due to polystyrene grafting since PU-SiC@SiO2 films showed only a 1.7 times increase. The observed higher strain response of these nanocomposites makes them very attractive for micro-electromechanical applications.

  9. Blue cures blue but be cautious

    Directory of Open Access Journals (Sweden)

    Pranav Sikka

    2011-01-01

    Full Text Available Methemoglobinemia is a disorder characterized by the presence of >1% methemoglobin (metHb in the blood. Spontaneous formation of methemoglobin is normally counteracted by protective enzyme systems, for example, nicotinamide adenine dinucleotide phosphate (NADPH methemoglobin reductase. Methemoglobinemia is treated with supplemental oxygen and methylene blue (1-2 mg/kg administered slow intravenously, which acts by providing an artificial electron acceptor for NADPH methemoglobin reductase. But known or suspected glucose-6-phosphate dehydrogenase (G6PD deficiency is a relative contraindication to the use of methylene blue because G6PD is the key enzyme in the formation of NADPH through pentose phosphate pathway and G6PD-deficient individuals generate insufficient NADPH to efficiently reduce methylene blue to leukomethylene blue, which is necessary for the activation of the NADPH-dependent methemoglobin reductase system. So, we should be careful using methylene blue in methemoglobinemia patient before G6PD levels.

  10. Clinically relevant mechanical testing of hernia graft constructs.

    Science.gov (United States)

    Sahoo, Sambit; DeLozier, Katherine R; Erdemir, Ahmet; Derwin, Kathleen A

    2015-01-01

    To understand the mechanical behavior of grafts in the context of hernia repair, there is a need to develop and adopt methods for mechanical testing of grafts in a clinically-relevant manner with clinically-relevant outcomes. Ball-burst and planar-biaxial methods were used to test three commercially-available hernia grafts (DermaMatrix, Biodesign, VitaMesh Blue). Both load-to-failure and cyclic fatigue tests were performed (n=6-11/group/test). Grafts were tested as sutured constructs in patch geometry. Dilatational strain analysis was performed considering the construct (both test methods) or the graft (planar-biaxial only) as the area of interest. DermaMatrix, Biodesign, and VitaMesh grafts showed differences in mechanical properties at the point of construct failure (load, in-plane load-per-suture and membrane tension) in ball-burst tests and differences in sub-failure properties (stiffness, dilatational strain at 16N/cm and cyclic mechanical properties) in planar-biaxial tests. In both load-to-failure and cyclic fatigue tests, each graft construct tended to be stiffer in planar-biaxial than ball-burst testing. In biaxial testing, the strain analysis method influenced the mechanical properties with the construct being more compliant than the graft. This study demonstrates that graft-fixation method, test mode and analysis method are important considerations for mechanical characterization of hernia grafts. Ball-burst tests can only estimate construct or material properties, whereas planar-biaxial tests capture anisotropy and can estimate construct, graft and material properties of the same test specimen. When the clinical performance of a graft in the context of hernia repair is of interest, testing a sutured construct and performing construct strain analysis arguably provides the most clinically-relevant assessment method. Copyright © 2014 Elsevier Ltd. All rights reserved.

  11. Rigid Polyurethane Foam Reinforced Coconut Coir Fiber Properties

    OpenAIRE

    Mohd Azham Azmi

    2012-01-01

    This research work studied the properties of composite foam panels. Coconut coir fibers were used as reinforcement in polyurethane (PU) foam in order to increase the properties of foam. This composite foam panels were fabricated by using polyurethane molded method. The polyurethane foam panels reinforced from 5 to 20wt% coconut coir were produced to investigate the physical and mechanical test via density test and three point bending test respectively. It was found that the density test resul...

  12. The Effect of Ethylene Glycol to Soy Polyurethane Foam Classifications

    OpenAIRE

    Flora Elvistia Firdaus

    2012-01-01

    Soy polyol obtained from hydroxylation of soy epoxide with ethylene glycol were prepared as pre-polyurethane. The two step process method were applied in the polyurethane synthesis. The blending of soy polyol with synthetic polyol then simultaneously carried out to TDI (2,4): MDI (4,4-) (80:20), blowing agent, and surfactant. Ethylene glycol were not taking part in the polyurethane synthesis. The inclusion of ethylene glycol were used as a control. Characterization of pol...

  13. Blue-Green Algae

    Science.gov (United States)

    ... people with hepatitis C or hepatitis B. HIV/AIDS. Research on the effects of blue-green algae in people with HIV/AIDS has been inconsistent. Some early research shows that taking 5 grams of blue-green ...

  14. Palm oil based polyols for acrylated polyurethane production

    International Nuclear Information System (INIS)

    Rida Tajau; Mohd Hilmi Mahmood; Mek Zah Salleh; Khairul Zaman Mohd Dahlan; Rosley Che Ismail

    2006-01-01

    Palm oil becomes important renewable resources for the production of polyols for the polyurethane manufacturing industry. The main raw materials used for the production of acrylated polyurethane are polyols, isocyanates and hydroxyl terminated acrylate compounds. In these studies, polyurethane based natural polymer (palm oil), i.e., POBUA (Palm Oil Based Urethane Acrylate) were prepared from three different types of palm oil based polyols i.e., epoxidised palm oil (EPOP), palm oil oleic acid and refined, bleached and deodorized (RBD) palm olein based polyols. The performances of these three acrylated polyurethanes when used for coatings and adhesives were determined and compared with each other. (Author)

  15. HPSEC Analysis of Ester-Based Polyurethane Rubber Materials

    National Research Council Canada - National Science Library

    Napadensky, Eugene

    2000-01-01

    ... (TACOM) at Picatinny Arsenal, NJ, to evaluate the environmental and operational stability of candidate commercial polyester-polyurethane rubber materials for possible fuel bladder and containment applications...

  16. Crosslinked polyurethanes based on hyperbranched polymers

    Directory of Open Access Journals (Sweden)

    Vuković Jasna

    2008-01-01

    Full Text Available In this paper, two samples of polyurethane (PU crosslinked with hydroxy -functonal hyperbranched aliphatic polyester of the second pseudo generation were investigated. For the synthesis of these crosslinked PUs two different macrodiols were used: poly(tetramethyleneoxide (PTMO for PUPTMO and ethylene oxide-poly(dimethylsiloxane-ethylene oxide (PDMS-EO for PUPDMS-EO sample. Synthesized samples behave as elastomers and have yellow color. Obtained results show that swelling degree of the sample PUPDMS-EO in N-methyl-2-pyrrolidinon (NMP determined at room temperature is higher than for the sample PUPTMO. It has been also observed that thermal properties of these polyurethane networks can be changed by incorporation of siloxane sequences in their structure.

  17. Thermal stability of soy-based polyurethanes

    Directory of Open Access Journals (Sweden)

    Luciane L. Monteavaro

    2005-06-01

    Full Text Available New types of polyurethanes were prepared by reacting diisocyanates and formiated soy polyols with different OH functionalities. Thermal properties and degradation kinetics were investigated by TGA. All prepared PU's showed at least two-weight loss steps, the first one, around 210 °C. Thermal stability of these PUs depends strongly on urethane groups per unit volume and an increase in the weight loss was observed as a result of the increased amount of urethane groups. Degradation kinetics behavior of the soy-based polyurethanes was investigated according to the Flynn method. Different average activation energy values were obtained from isothermal and isoconversional curves, 140.6 KJ/mol and 62.8 KJ/mol, respectively, indicating the complexity of the PUs degradation process.

  18. Thermoplastic polyurethane as a mechanochromic strain sensor

    Science.gov (United States)

    Cellini, Filippo; Khapli, Sachin; Peterson, Sean D.; Porfiri, Maurizio

    2015-04-01

    Mechanochromism of polymer-dye blends can be used to formulate novel pressure sensors for fluid mechanics and hydrology, where the use of traditional electromechanical transducers may be limited by environmental factors. Here, we investigate optomechanical properties of a mechanochromic blend of thermoplastic polyurethane and 0.5 wt% bis(benzoxazolyl)stilbene fluorescent dye. We characterize the response of this soft active material in a stress relaxation test by simultaneous acquisition of the tensile load, the mechanical deformation, and the fluorescence emission.

  19. Elastic Compositions Based on Polyurethane/ Aliphatic Polyesters

    International Nuclear Information System (INIS)

    Motawie, A.M.; Mazroua, A.M.; Sadek, E.M.; Emam, A.S.; Ramadan, A.M.

    2004-01-01

    Aliphatic polyesters were prepared by melt condensation reaction of a dicarboxylic acid such as adipic and sebacic with different types of diol compounds in 1: 1.1 molar ratio. Ethylene glycol, di-, trio, tetra ethylene glycol and poly( ethylene glycol) with different molecular weights 1000, 4000, 6000 as well as the prepared hydroxy natural rubber were used as diol compounds. Polyurethane, with NCO/OH ratio equal 4, was synthesized from the reaction of toluene diisocyanate with poly(ethylene glycol) 1 000. The prepared polyurethane was mixed with different weight percentages of the prepared aliphatic polyesters. The film samples were tested mechanically, electrically and chemically. The results show that the weight percentage 10% of the added polyadipate or poly sebacate glycols improves flexibility, electrical volume resistivity, dielectric constant and dielectric loss of unmodified rigid polyurethane film sample as well as reduces its swelling by aromatic solvents. All the above mentioned properties improve by increasing the hydrocarbon chain length of the glycol portion in the glycol used and the number of methylene in the aliphatic dicarboxylic acid. Compositions based on hydroxy natural rubber impart better properties than those based on ethylene glycols

  20. Enhancement of antibacterial properties of polyurethanes by chitosan and heparin immobilization

    Science.gov (United States)

    Kara, Filiz; Aksoy, E. Ayse; Yuksekdag, Zehranur; Aksoy, Serpil; Hasirci, Nesrin

    2015-12-01

    Being antibacterial is a required property for the materials used in medical devices and instruments. Polyurethanes (PUs) are one class of polymers widely used in the production of devices that especially come in contact with blood (e.g. heart valves, blood vessels, vascular grafts and catheters). In this study, hexamethylene diisocyanate based polyurethanes (PUh) were synthesized and antibacterial and anti-adhesive properties were added by immobilizing chitosan (CH) and heparin (Hep) on the samples of PUh via a stepwise process. Chemistry and topography of the modified film samples (PUh-CH and PUh-CH-Hep) were examined by Fourier Transform Infrared Spectrophotometry-Attenuated Total Reflectance (FTIR-ATR), Electron Spectroscopy for Chemical Analysis (ESCA) and Atomic Force Microscopy (AFM), and surface free energy (SFE) values after each step were determined by goniometer. PUh-CH and PUh-CH-Hep samples were found to be antibacterial against Staphylococcus aureus (S. aureus) and Staphylococcus epidermidis (S. epidermidis) (both Gram positive) and Escherichia coli (E. coli) and Pseudomonas aeruginosa (P. aeruginosa) (both Gram negative) bacteria, and bacterial adhesion results showed a significant decrease in the number of viable bacteria on both modified samples where PUh-CH-Hep was the most effective. The findings of this study show that polymeric surfaces can be effectively modified and converted to be antibacterial by chitosan and heparin immobilization, and presence of both chemicals enhance efficacy against bacteria.

  1. Functionally active silicones as modifiers of polyurethane textile ...

    African Journals Online (AJOL)

    Modification of application and service properties of polyurethane textile coatings and cast polyurethane films using polysiloxanes (functionally active silicones) have been studied. Experiments were conducted to investigate the effect of silicon additives on processing, adhesion, water repellence, and resistance to tea and ...

  2. Recycling of polyurethane foams: A strategy in waste management ...

    African Journals Online (AJOL)

    ... recycling. of polyurethane post consumer product as a means of waste reduction in our society is still grossly underutilised. This paper examines the current trend in recycling as a means of waste management and focuses on various methods of recycling polyurethane foams considering their application(s) to the Nigerian ...

  3. A kinetic investigation of polyurethane polymerization for reactive extrusion purposes

    NARCIS (Netherlands)

    Verhoeven, VWA; Padsalgikar, AD; Ganzeveld, KJ; Janssen, LPBM

    2006-01-01

    The effects of the reaction conditions on the kinetics of two different polyurethane systems were investigated. To do so, three different kinetic methods were compared: adiabatic temperature rise (ATR), measurement kneader, and high-temperature measurements. For the first polyurethane system,

  4. Fluorinated Polyurethane Scaffolds for 19F Magnetic Resonance Imaging

    NARCIS (Netherlands)

    Lammers, Twan; Mertens, Marianne E.; Schuster, Philipp; Rahimi, Khosrow; Shi, Yang; Schulz, Volkmar; Kuehne, Alexander J.C.; Jockenhoevel, Stefan; Kiessling, Fabian

    2017-01-01

    Researchers used fluorinated polyurethane scaffolds for 19F magnetic resonance imaging. They generated a novel fluorinated polymer based on thermoplastic polyurethane (19F -TPU) which possesses distinct properties rendering it suitable for fluorine-based MRI. The 19F -TPU is synthesized from a

  5. Controlled release of 5-flurouracil from biomedical polyurethanes

    Indian Academy of Sciences (India)

    Administrator

    The release of 5-FU through the microspheres was investigated in pH 7⋅4- phosphate buffer. An increase in release rate was observed with increasing molar ratio of PLF68 with respect to castor oil. Keywords. Biomedical polyurethane; controlled release; 5-flurouracil; drug delivery. 1. Introduction. Polyurethanes are one of ...

  6. Polyurethane nanofibers containing copper nanoparticles as future materials

    DEFF Research Database (Denmark)

    Sheikh, Faheem A.; Kanjwal, Muzafar Ahmed; Saran, Saurabh

    2011-01-01

    In the present study, we aimed to represent a novel approach to fabricate polyurethane nanofibers containing copper nanoparticles (NPs) by simple electrospinning process. A simple method, not depending on additional foreign chemicals, has been employed to utilize prepared copper NPs in polyurethane...

  7. Engineered vascularized bone grafts

    OpenAIRE

    Tsigkou, Olga; Pomerantseva, Irina; Spencer, Joel A.; Redondo, Patricia A.; Hart, Alison R.; O’Doherty, Elisabeth; Lin, Yunfeng; Friedrich, Claudia C.; Daheron, Laurence; Lin, Charles P.; Sundback, Cathryn A.; Vacanti, Joseph P.; Neville, Craig

    2010-01-01

    Clinical protocols utilize bone marrow to seed synthetic and decellularized allogeneic bone grafts for enhancement of scaffold remodeling and fusion. Marrow-derived cytokines induce host neovascularization at the graft surface, but hypoxic conditions cause cell death at the core. Addition of cellular components that generate an extensive primitive plexus-like vascular network that would perfuse the entire scaffold upon anastomosis could potentially yield significantly higher-quality grafts. W...

  8. Surface characteristics of chitin-based shape memory polyurethane elastomers.

    Science.gov (United States)

    Zia, Khalid Mahmood; Zuber, Mohammad; Barikani, Mehdi; Bhatti, Ijaz Ahmad; Khan, Mohammad Bilal

    2009-09-01

    Shape memory polyurethanes (SMPUs) were prepared from polycaprolactone diol 4000 (PCL 4000), 1,4-butanediol (BDO), chitin, dimethylol propionic acid (DMPA), triethylamine (TEA) and 4,4'-diphenylmethane diisocyanate (MDI), and the structures of the synthesized materials were verified by infrared spectroscopy. The effects of chitin and DMPA contents in the polyurethane formulation on surface properties were investigated. DMPA provides function of making hydrophilic polyurethanes. The crystalline structure of chitin enhanced the hydrophobicity of the synthesized materials. Contact angle, water absorption, surface free energy, work of water adhesion and swelling behavior of the synthesized polyurethanes were affected by varying the DMPA and chitin contents. The interactions of the PU films with solvents on the surface were clearly related to the contents of DMPA and chitin in the final polyurethane formulation.

  9. The effect of silica thickness on nano TiO2particles for functional polyurethane nanocomposites.

    Science.gov (United States)

    Chen, Chao; Wu, Wei; Xu, William Z; Charpentier, Paul A

    2017-03-17

    In order to help reduce the agglomeration of TiO 2 nanoparticles in polyurethane coatings while enhancing their photoactivity and mechanical/physical properties, this work examined encapsulating TiO 2 nanoparticles in a thin layer of SiO 2 , prior to their nanocomposite polymerization. By applying a Stöber process, varying thicknesses of SiO 2 were successfully coated onto the surface of anatase and rutile TiO 2 nanoparticles. The methylene blue results showed that different loadings of SiO 2 onto the TiO 2 surface significantly influenced their photocatalytic activity. When the loading weight of SiO 2 was lower than 3.25 wt%, the photocatalytic activity was enhanced, while with higher loadings, it gave lower photocatalytic activity. When the rutile phase TiO 2 surface was fully covered with SiO 2 , an enhanced photocatalytic activity was observed. When these silica coated nanoparticles were applied in polyurethane coatings, increasing the amount of SiO 2 on the titania surface increased the coatings contact angle from 75° to 87° for anatase phase and 70°-78° for rutile phase. The Young's modulus was also increased from 1.06 GPa to 2.77 GMPa for anatase phase and 1.06-2.17 GPa for rutile phase, attributed to the silica layer giving better integration. The thermal conductivity of the polyurethane coatings was also successfully decreased by encapsulating SiO 2 on the titania surface for next generation high performance coatings.

  10. Biodegradative Activities of Selected Environmental Fungi on a Polyester Polyurethane Varnish and Polyether Polyurethane Foams.

    Science.gov (United States)

    Álvarez-Barragán, Joyce; Domínguez-Malfavón, Lilianha; Vargas-Suárez, Martín; González-Hernández, Ricardo; Aguilar-Osorio, Guillermo; Loza-Tavera, Herminia

    2016-09-01

    Polyurethane (PU) is widely used in many aspects of modern life because of its versatility and resistance. However, PU waste disposal generates large problems, since it is slowly degraded, there are limited recycling processes, and its destruction may generate toxic compounds. In this work, we isolated fungal strains able to grow in mineral medium with a polyester PU (PS-PU; Impranil DLN) or a polyether PU (PE-PU; Poly Lack) varnish as the only carbon source. Of the eight best Impranil-degrading strains, the six best degraders belonged to the Cladosporium cladosporioides complex, including the species C. pseudocladosporioides, C. tenuissimum, C. asperulatum, and C. montecillanum, and the two others were identified as Aspergillus fumigatus and Penicillium chrysogenum The best Impranil degrader, C. pseudocladosporioides strain T1.PL.1, degraded up to 87% after 14 days of incubation. Fourier transform infrared (FTIR) spectroscopy analysis of Impranil degradation by this strain showed a loss of carbonyl groups (1,729 cm(-1)) and N-H bonds (1,540 and 1,261 cm(-1)), and gas chromatography-mass spectrometry (GC-MS) analysis showed a decrease in ester compounds and increase in alcohols and hexane diisocyanate, indicating the hydrolysis of ester and urethane bonds. Extracellular esterase and low urease, but not protease activities were detected at 7 and 14 days of culture in Impranil. The best eight Impranil-degrading fungi were also able to degrade solid foams of the highly recalcitrant PE-PU type to different extents, with the highest levels generating up to 65% of dry-weight losses not previously reported. Scanning electron microscopy (SEM) analysis of fungus-treated foams showed melted and thinner cell wall structures than the non-fungus-treated ones, demonstrating fungal biodegradative action on PE-PU. Polyurethane waste disposal has become a serious problem. In this work, fungal strains able to efficiently degrade different types of polyurethanes are reported, and

  11. Osseous scintigraphy and auxiliary graft

    International Nuclear Information System (INIS)

    Khelifa, F.; Siles, S.; Puech, B.

    1992-01-01

    The scintigraphy could be a good way to survey the osseous graft: three cases are studied in which were recognized the presence of a graft, surinfection, graft lysis, pseudo-arthrosis, algodystrophy. 8 refs., 5 figs

  12. Meniscal allograft transplantation. Part 1: systematic review of graft biology, graft shrinkage, graft extrusion, graft sizing, and graft fixation.

    Science.gov (United States)

    Samitier, Gonzalo; Alentorn-Geli, Eduard; Taylor, Dean C; Rill, Brian; Lock, Terrence; Moutzouros, Vasilius; Kolowich, Patricia

    2015-01-01

    To provide a systematic review of the literature regarding five topics in meniscal allograft transplantation: graft biology, shrinkage, extrusion, sizing, and fixation. A systematic literature search was conducted using the PubMed (MEDLINE), ScienceDirect, and EBSCO-CINAHL databases. Articles were classified only in one topic, but information contained could be reported into other topics. Information was classified according to type of study (animal, in vitro human, and in vivo human) and level of evidence (for in vivo human studies). Sixty-two studies were finally included: 30 biology, 3 graft shrinkage, 11 graft extrusion, 17 graft size, and 6 graft fixation (some studies were categorized in more than one topic). These studies corresponded to 22 animal studies, 22 in vitro human studies, and 23 in vivo human studies (7 level II, 10 level III, and 6 level IV). The principal conclusions were as follows: (a) Donor cells decrease after MAT and grafts are repopulated with host cells form synovium; (b) graft preservation alters collagen network (deep freezing) and causes cell apoptosis with loss of viable cells (cryopreservation); (c) graft shrinkage occurs mainly in lyophilized and gamma-irradiated grafts (less with cryopreservation); (d) graft extrusion is common but has no clinical/functional implications; (e) overall, MRI is not superior to plain radiograph for graft sizing; (f) graft width size matching is more important than length size matching; (g) height appears to be the most important factor influencing meniscal size; (h) bone fixation better restores contact mechanics than suture fixation, but there are no differences for pullout strength or functional results; and (i) suture fixation has more risk of graft extrusion compared to bone fixation. Systematic review of level II-IV studies, Level IV.

  13. Nasolacrimal Polyurethane Stent: Complications with CT Correlation

    International Nuclear Information System (INIS)

    Pinto, Isabel T.; Paul, Laura; Grande, Carlos

    1998-01-01

    Purpose: To evaluate initial results in patients with epiphora secondary to obstruction of the nasolacrimal duct treated by placement of a polyurethane stent, and to discuss the technical problems and complications arising during the procedure, with visualization of the anatomy of the drainage apparatus using computed tomography (CT). Methods: We inserted 20 polyurethane Song stents under fluoroscopic guidance after dacryocystography in 19 patients with grade 3-4 epiphora caused by idiopathic obstruction of the nasolacrimal duct. CT scans were obtained following stent placement in all patients. Results: We focus on the technical problems and complications that arose during these procedures. During negotiation of the guidewire past the obstruction at the level of the junction of the duct with the lacrimal sac, the guidewire created a false passage in a posterior suborbital direction in two cases and towards the posterior midline in another. In all cases the guidewire was withdrawn and reinserted through the proper anatomic route without further difficulty or complications. In two cases the stent was improperly positioned wholly or partially outside the nasolacrimal system (one medially, one posteriorly). In one case the stent was removed and reinserted; in the other it remains in place and functional. CT was performed in all these cases to ensure proper anatomic alignment and determine what had gone wrong. The epiphora was completely resolved in 13 cases and partially relieved in four; there were three cases of stent obstruction. Epistaxis of short duration (1 hr) occurred in seven patients and headache in one. Conclusions: Treatment of epiphora with polyurethane stents is a technique that is well tolerated by patients and achieves a high success rate, yet problems in placement may be encountered. Though no major consequences for patients are involved, cognizance of such difficulties is important to avoid incorrect positioning of stents

  14. Polyurethane networks based on poly (ethylene oxide)

    International Nuclear Information System (INIS)

    Zulfiqar, S.; Quddos, A.

    1993-01-01

    A wide range of infinite urethane polymer networks were prepared from poly (ethylene glycol) (PEG) and hexamethylene disocyanate (HMDI) using 1,1,1, tris (hydroxymethyl) ethane (THME) as crosslinking agent. Differential scanning calorimetry showed that the hydrate formation depends quantitatively upon the weight fraction on poly(ethylene oxide) in the gel. It has been shown that the crosslinked polyurethanes crystallize only with definite ranges of chain length between the knots. In this range with the increase of the degree of crosslinking and crystallinity on the swelling character of the polymeric materials has also been discussed. (author)

  15. Structures and Properties of Polyurethanes. Part II,

    Science.gov (United States)

    1979-03-23

    sharkly pconouuced maximum, that does not make it possible to characterize the aenavior of polyurethane rubbers with the aid of kinetic theory. A cnaue in...of the spin-lattice relaxation of segments to tue sida of high temFeratures in comparison with transition for polyetaec/pclyesters, but this...1523. 265. M ar k J., FIaor y P-J. Amer. Chem. Soc., 1964. 86, 138. 266. M a rt in H., M 6ll1e r E.- Koll. Z., 1960. 42, 991. 267 Mar ve I C., AId r

  16. Shock Wave Structure in Polyurethane Foam

    OpenAIRE

    ONODERA, Hideki; TAKAYAMA, Kazuyoshi

    1994-01-01

    Shock wave propagation in polyurethane (PU(R)) foam was experimentally studied. The experiment was conducted in a shock tube by measuring pressure along the PU(R) foam in a shock tube, by means of holographic interferometry and streak camera recording. It was found that the stress-strain curve of PU(R) has an inflection point. When the pressure behind the incident shock wave was below the inflection-point pressure P_c, the wave impedance ratio of the incident shock wave and transmitted pressu...

  17. Mechanical Characterization of Rigid Polyurethane Foams

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Wei-Yang [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Mechanics of Materials

    2014-12-01

    Foam materials are used to protect sensitive components from impact loading. In order to predict and simulate the foam performance under various loading conditions, a validated foam model is needed and the mechanical properties of foams need to be characterized. Uniaxial compression and tension tests were conducted for different densities of foams under various temperatures and loading rates. Crush stress, tensile strength, and elastic modulus were obtained. A newly developed confined compression experiment provided data for investigating the foam flow direction. A biaxial tension experiment was also developed to explore the damage surface of a rigid polyurethane foam.

  18. Advances in radiation grafting

    International Nuclear Information System (INIS)

    Hegazy, El-Sayed A.; AbdEl-Rehim, H.A.; Kamal, H.; Kandeel, K.A.

    2001-01-01

    Graft copolymerization is an attractive means for modifying base polymers because grafting frequently results in the superposition of properties relating to the backbone and pendent chains. Among the various methods for initiating the grafting reaction, ionizing radiation is the cleanest and most versatile method of grafting available. Ion-exchange membranes play an important role in modern technology, especially in separation and purification of materials. The search for improved membrane composition has considered almost every available polymeric material because of its great practical importance. Grafting of polymers with a mixture of monomers is important since different types of chains containing different functional groups are included. A great deal is focused on the waste treatment of heavy and toxic metals from wastewater because of the severe problems of environmental pollution. Functionalized polymers suitable for metal adsorption with their reactive functional groups such as carboxylic and pyridine groups suitable for waste treatment were prepared by radiation grafting method. More reactive chelating groups were further introduced to the grafted copolymer through its functional groups by chemical treatments with suitable reagents. The advances of radiation grafting and possible uses are briefly discussed

  19. Advances in radiation grafting

    Science.gov (United States)

    Hegazy, El-Sayed A.; AbdEl-Rehim, H. A.; Kamal, H.; Kandeel, K. A.

    2001-12-01

    Graft copolymerization is an attractive means for modifying base polymers because grafting frequently results in the superposition of properties relating to the backbone and pendent chains. Among the various methods for initiating the grafting reaction, ionizing radiation is the cleanest and most versatile method of grafting available. Ion-exchange membranes play an important role in modern technology, especially in separation and purification of materials. The search for improved membrane composition has considered almost every available polymeric material because of its great practical importance. Grafting of polymers with a mixture of monomers is important since different types of chains containing different functional groups are included. A great deal is focused on the waste treatment of heavy and toxic metals from wastewater because of the severe problems of environmental pollution. Functionalized polymers suitable for metal adsorption with their reactive functional groups such as carboxylic and pyridine groups suitable for waste treatment were prepared by radiation grafting method. More reactive chelating groups were further introduced to the grafted copolymer through its functional groups by chemical treatments with suitable reagents. The advances of radiation grafting and possible uses are briefly discussed.

  20. Blue Ocean Thinking

    Science.gov (United States)

    Orem, Donna

    2016-01-01

    This article describes a concept called the "blue ocean thinking strategy," developed by W. Chan Kim and Renée Mauborgne, professors at INSEAD, an international graduate school of business in France. The "blue ocean" thinking strategy considers opportunities to create new markets for services, rather than focusing solely on…

  1. Castor Oil Based Polyurethanes: Synthesis and Characterization

    Science.gov (United States)

    Macalino, AD; Salen, VA; Reyes, LQ

    2017-09-01

    In this study, polyurethanes based on castor oil and 1,6-hexamethylene diisocyanate (HMDI) were synthesized with varying weight ratio of the castor oil and HMDI. The formation of urethane linkages was verified through the use of a fourier transform infrared spectroscopy (FTIR). The hydrophilicity of the films was evaluated through the use of a contact angle meter and it was found that the contact angle of all the films were below 90 degrees which confirms their hydrophilicity. The thermal stability of the PU films were studies through the use of a thermal gravimetric analyzer and found that all of the polyurethane films exhibited two weight loss events at elevated temperatures wherein the first weight loss event was observed to occur at 285°C to 384°C while the second weight loss event was observed at around 521°C to 551°C. The hardness, elastic modulus, and tensile elongation of the PU films were determined by using a universal testing machine (UTM) where it was found out that the hardness and the elastic modulus of the film is directly proportional with HMDI loading while the tensile elongation is inversely proportional to it. Lastly, it was known through the swelling studies of the PU films that it does not swell, this is due to the presence of unreacted triglycerides in the material, which prevents water from permeating to the films.

  2. A review: fabrication of porous polyurethane scaffolds.

    Science.gov (United States)

    Janik, H; Marzec, M

    2015-03-01

    The aim of tissue engineering is the fabrication of three-dimensional scaffolds that can be used for the reconstruction and regeneration of damaged or deformed tissues and organs. A wide variety of techniques have been developed to create either fibrous or porous scaffolds from polymers, metals, composite materials and ceramics. However, the most promising materials are biodegradable polymers due to their comprehensive mechanical properties, ability to control the rate of degradation and similarities to natural tissue structures. Polyurethanes (PUs) are attractive candidates for scaffold fabrication, since they are biocompatible, and have excellent mechanical properties and mechanical flexibility. PU can be applied to various methods of porous scaffold fabrication, among which are solvent casting/particulate leaching, thermally induced phase separation, gas foaming, emulsion freeze-drying and melt moulding. Scaffold properties obtained by these techniques, including pore size, interconnectivity and total porosity, all depend on the thermal processing parameters, and the porogen agent and solvents used. In this review, various polyurethane systems for scaffolds are discussed, as well as methods of fabrication, including the latest developments, and their advantages and disadvantages. Copyright © 2014. Published by Elsevier B.V.

  3. Study of the morphology exhibited by linear segmented polyurethanes

    International Nuclear Information System (INIS)

    Pereira, I.M.; Orefice, R.L.

    2009-01-01

    Five series of segmented polyurethanes with different hard segment content were prepared by the prepolymer mixing method. The nano-morphology of the obtained polyurethanes and their microphase separation were investigated by infrared spectroscopy, modulated differential scanning calorimetry and small-angle X-ray scattering. Although highly hydrogen bonded hard segments were formed, high hard segment contents promoted phase mixture and decreased the chain mobility, decreasing the hard segment domain precipitation and the soft segments crystallization. The applied techniques were able to show that the hard-segment content and the hard-segment interactions were the two controlling factors for determining the structure of segmented polyurethanes. (author)

  4. Blue ocean strategy.

    Science.gov (United States)

    Kim, W Chan; Mauborgne, Renée

    2004-10-01

    Despite a long-term decline in the circus industry, Cirque du Soleil profitably increased revenue 22-fold over the last ten years by reinventing the circus. Rather than competing within the confines of the existing industry or trying to steal customers from rivals, Cirque developed uncontested market space that made the competition irrelevant. Cirque created what the authors call a blue ocean, a previously unknown market space. In blue oceans, demand is created rather than fought over. There is ample opportunity for growth that is both profitable and rapid. In red oceans--that is, in all the industries already existing--companies compete by grabbing for a greater share of limited demand. As the market space gets more crowded, prospects for profits and growth decline. Products turn into commodities, and increasing competition turns the water bloody. There are two ways to create blue oceans. One is to launch completely new industries, as eBay did with online auctions. But it's much more common for a blue ocean to be created from within a red ocean when a company expands the boundaries of an existing industry. In studying more than 150 blue ocean creations in over 30 industries, the authors observed that the traditional units of strategic analysis--company and industry--are of limited use in explaining how and why blue oceans are created. The most appropriate unit of analysis is the strategic move, the set of managerial actions and decisions involved in making a major market-creating business offering. Creating blue oceans builds brands. So powerful is blue ocean strategy, in fact, that a blue ocean strategic move can create brand equity that lasts for decades.

  5. Thermodynamically stable blue phases.

    Science.gov (United States)

    Castles, F; Morris, S M; Terentjev, E M; Coles, H J

    2010-04-16

    We show theoretically that flexoelectricity stabilizes blue phases in chiral liquid crystals. Induced internal polarization reduces the elastic energy cost of splay and bend deformations surrounding singular lines in the director field. The energy of regions of double twist is unchanged. This in turn reduces the free energy of the blue phase with respect to that of the chiral nematic phase, leading to stability over a wider temperature range. The theory explains the discovery of large temperature range blue phases in highly flexoelectric "bimesogenic" and "bent-core" materials, and predicts how this range may be increased further.

  6. Uncertainty Analysis of Decomposing Polyurethane Foam

    Science.gov (United States)

    Hobbs, Michael L.; Romero, Vicente J.

    2000-01-01

    Sensitivity/uncertainty analyses are necessary to determine where to allocate resources for improved predictions in support of our nation's nuclear safety mission. Yet, sensitivity/uncertainty analyses are not commonly performed on complex combustion models because the calculations are time consuming, CPU intensive, nontrivial exercises that can lead to deceptive results. To illustrate these ideas, a variety of sensitivity/uncertainty analyses were used to determine the uncertainty associated with thermal decomposition of polyurethane foam exposed to high radiative flux boundary conditions. The polyurethane used in this study is a rigid closed-cell foam used as an encapsulant. Related polyurethane binders such as Estane are used in many energetic materials of interest to the JANNAF community. The complex, finite element foam decomposition model used in this study has 25 input parameters that include chemistry, polymer structure, and thermophysical properties. The response variable was selected as the steady-state decomposition front velocity calculated as the derivative of the decomposition front location versus time. An analytical mean value sensitivity/uncertainty (MV) analysis was used to determine the standard deviation by taking numerical derivatives of the response variable with respect to each of the 25 input parameters. Since the response variable is also a derivative, the standard deviation was essentially determined from a second derivative that was extremely sensitive to numerical noise. To minimize the numerical noise, 50-micrometer element dimensions and approximately 1-msec time steps were required to obtain stable uncertainty results. As an alternative method to determine the uncertainty and sensitivity in the decomposition front velocity, surrogate response surfaces were generated for use with a constrained Latin Hypercube Sampling (LHS) technique. Two surrogate response surfaces were investigated: 1) a linear surrogate response surface (LIN) and 2

  7. New Flexible FR Polyurethane Foams for Energy Absorption Applications Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Development of new polyurethane (PU) insulation foams through a non-toxic environmentally friendly composite approach. Target FR foams will exhibit high heat flow...

  8. Nano-engineered polyurethane resin-modified concrete.

    Science.gov (United States)

    2014-04-01

    The goal of the proposed work is to investigate the application of nano-engineered polyurethane (NEPU) emulsions for latex modified : concrete (LMC). NEPU emulsions are non-toxic, environment friendly, durable over a wide temperature range, provide b...

  9. Soy-based UV resistant polyurethane pultruded composites.

    Science.gov (United States)

    2012-02-01

    Aliphatic polyurethane (PU) nanocomposites were synthesized using organically modified nanoclays. X-Ray diffraction results : confirmed good exfoliation of nanoclay particles in the PU resin system. With the addition of just 1% of nanoclay in the bas...

  10. Experimental Investigation of Polyurethane Camouflage Coating Using Dynamic Mechanical Analysis

    National Research Council Canada - National Science Library

    Crawford, Dawn

    1999-01-01

    .... The current polyurethane solvent-based (SOL) formulation, used as a chemical-agent-resistant camouflage top coat on all military tactical vehicles, was investigated, along with newly developed water-reducible (WR...

  11. The effect of radiosterilization on cytotoxicity of polyurethane film

    Energy Technology Data Exchange (ETDEWEB)

    Sheikh, N. E-mail: nasrinsheikh@hotmail.com

    2003-08-01

    Nowadays a sequence of tests for evaluation of sterilized biomaterial includes an initial set of tests in vitro, both biological (cell culture) and non-biological (mechanical tests). In this paper the cytotoxicity of a sterilized polyurethane film, in order to use as biomaterial, has been investigated. For this purpose NCO-terminated urethane prepolymer in medical quality was synthesized without ingredients beside monomers (polyethylene glycol/castor oil and toluene diisocyanate). The cured prepolymer films were prepared under ambient conditions due to the reaction of free NCO-groups of prepolymer with air moisture. The polyurethane films were sterilized by gamma-ray (25 kGy). The surface structure of sterilized polyurethane film was observed by SEM and compared to that of the unsterilized film. Also, the in vitro interaction of fibroblast cells and sterilized polyurethane film in culture medium containing serum was evaluated in comparison with control samples. Results showed no signs of cell toxicity.

  12. Polyurethane foam for roadway stabilization NH Route 129, Loudon, NH.

    Science.gov (United States)

    2016-12-12

    This report summarizes the evaluation of the performance of polyurethane foam as a method of roadway : stabilization for a rural roadway experiencing substantial frost heaving. : NHDOT is responsible for many roads which have evolved from gravel road...

  13. Bone Graft Alternatives

    Science.gov (United States)

    ... spinal deformity, or who have some types of disc herniations. In certain types of spinal fusion, bone grafts ... Specialist SEARCH Download Brochure ENGLISH Related Treatments Cervical Disc Herniation Fusion Lumbar Disc Herniation {1} ##LOC[OK]## {1} ## ...

  14. Melting graft wound syndrome

    Directory of Open Access Journals (Sweden)

    Shiou-Mei Chen

    2017-09-01

    Full Text Available Melting graft wound syndrome is characterized by progressive epidermal loss from a previously well-taken skin graft, healed burn, or donor site. It may result in considerable morbidity and require prolonged treatment. We report a 23-year-old flame-burned patient with second- to third-degree burns involving more than 70% of the total body surface area, whose condition was complicated with septic shock. The patient presented with erosions and ulcers occurring on previously well-taken skin graft recipient sites over both legs and progressive epidermal loss on donor sites over the back. The patient's presentation was compatible with the diagnosis of melting graft wound syndrome, and we successfully treated the patient with debridement and supportive treatment.

  15. Property of Polyurethane: from Soy-derived Phosphate Ester

    OpenAIRE

    Flora Elvistia Firdaus

    2011-01-01

    Polyurethane foams (PUF) were formed by a chemical reaction of polyol and isocyanate. The polyol was manufactured by ring-opening hydrolysis of epoxidized soybean oil in the presence of phosphoric acid under varying experimental conditions. Other factors in the foam formulation such as water content and surfactant were kept constant. The effect of the amount of solvents, phosphoric acid, and their derivates in the foam formulation on the properties of polyurethane foams w...

  16. Flexible polyurethane foams based on 100% renewably sourced polyols

    OpenAIRE

    Ugarte, L.; Saralegi, A.; Fernández, R.; Martín, L.; Corcuera, M.A.; Eceiza, A.

    2015-01-01

    Since polyol is one of the major components in polyurethane foam synthesis, introducing renewably sourced polyols in the foam formulation leads to materials with high renewable carbon content. A series of flexible polyurethane foams with variations in polyol composition were synthesized with castor oil based Lupranol Balance ® 50 polyether polyol and corn based polytrimethylene ether glycol mixtures. Water was used as the unique and eco-friendly blowing agent. The effect of the relative amoun...

  17. Preparation and Characterization of Fluorinated Hydrophobic UV-Crosslinkable Thiol-Ene Polyurethane Coatings

    Directory of Open Access Journals (Sweden)

    Wenjing Xia

    2017-08-01

    Full Text Available The polyurethane prepolymer terminated with a double bond was synthesized using isophorone diisocyanate (IPDI, hydroxyl terminated polybutadiene (HTPB, 1,4-butanediol (BDO, and 2-hydroxyethyl acrylate (HEA. Then, a series of innovative UV-curable polyurethane coatings were prepared by blending ene-terminated polyurethane, fluoroacrylate monomer, and multifunctional thiol crosslinker upon UV exposure. The incorporation of fluoroacrylate monomer and multifunctional thiols into polyurethane coatings significantly enhanced the hydrophobic property, mechanical property, pencil hardness, and glossiness of the polyurethane coatings. This method of preparing UV crosslinkable, hydrophobic polyurethane coatings based on thiol-ene chemistry exhibited numerous advantages over other UV photocuring systems.

  18. Modeling Decomposition of Unconfined Rigid Polyurethane Foam

    Energy Technology Data Exchange (ETDEWEB)

    CHU,TZE YAO; ERICKSON,KENNETH L.; HOBBS,MICHAEL L.

    1999-11-01

    The decomposition of unconfined rigid polyurethane foam has been modeled by a kinetic bond-breaking scheme describing degradation of a primary polymer and formation of a thermally stable secondary polymer. The bond-breaking scheme is resolved using percolation theory to describe evolving polymer fragments. The polymer fragments vaporize according to individual vapor pressures. Kinetic parameters for the model were obtained from Thermal Gravimetric Analysis (TGA). The chemical structure of the foam was determined from the preparation techniques and ingredients used to synthesize the foam. Scale-up effects were investigated by simulating the response of an incident heat flux of 25 W/cm{sup 2} on a partially confined 8.8-cm diameter by 15-cm long right circular cylinder of foam which contained an encapsulated component. Predictions of center, midradial, and component temperatures, as well as regression of the foam surface, were in agreement with measurements using thermocouples and X-ray imaging.

  19. Modeling Decomposition of Unconfined Rigid Polyurethane Foam

    Energy Technology Data Exchange (ETDEWEB)

    HOBBS,MICHAEL L.; ERICKSON,KENNETH L.; CHU,TZE YAO

    1999-11-08

    The decomposition of unconfined rigid polyurethane foam has been modeled by a kinetic bond-breaking scheme describing degradation of a primary polymer and formation of a thermally stable secondary polymer. The bond-breaking scheme is resolved using percolation theory to describe evolving polymer fragments. The polymer fragments vaporize according to individual vapor pressures. Kinetic parameters for the model were obtained from Thermal Gravimetric Analysis (TGA). The chemical structure of the foam was determined from the preparation techniques and ingredients used to synthesize the foam. Scale-up effects were investigated by simulating the response of an incident heat flux of 25 W/cm{sup 2} on a partially confined 8.8-cm diameter by 15-cm long right circular cylinder of foam that contained an encapsulated component. Predictions of center, midradial, and component temperatures, as well as regression of the foam surface, were in agreement with measurements using thermocouples and X-ray imaging.

  20. Polyurethane elastomers from morphology to mechanical aspects

    CERN Document Server

    Prisacariu, Cristina

    2011-01-01

    A comprehensive account of the physical / mechanical behaviour of polyurethanes (PU´s) elastomers, films and blends of variable crystallinity. Aspects covered include the elasticity and inelasticity of amorphous to crystalline PUs, in relation to their sensitivity to chemical and physical structure. A study is made of how aspects of the constitutive responses of PUs vary with composition: the polyaddition procedure, the hard segment, soft segment and chain extender (diols and diamines) are varied systematically in a large number of systems of model and novel crosslinked andthermoplastic PUs. Results will be related to: microstructural changes, on the basis of evidence from x-ray scattering (SAXS and WAXS), and also dynamic mechanical analyses (DMA), differential scanning calorimetry (DSC) and IR dichroism. Inelastic effects will be investigated also by including quantitative correlations between the magnitude of the Mullins effect and the fractional energy dissipation by hysteresis under cyclic straining, g...

  1. Degradation characteristics of waste polyurethane by radiation

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jong Seok; Ahn, Sung Jun; Gwon Hui Jeong; Jeong, Sung In; Nho, Young Chang; Lim, Youn Mook [Research Division for Industry and Environment, Korea Atomic Energy Research Institute, Jeongeup (Korea, Republic of)

    2017-06-15

    Polyurethane (PU) is a very popular polymer that is used in a variety of applications due to its good mechanical, thermal, and chemical properties. However, waste PU recycling has received significant attention due to environmental issues. The aim of this work was to investigate the degradation characteristics of waste PU to recycle. Degradation of waste PU was carried out using a radiation techniques. Waste PUs were exposed to a gamma {sup 60}Co sources. To verify degradation, the irradiated PUs were characterized using FT-IR, gel permeation chromatography (GPC), and their thermal/mechanical properties are reported. When the radiation dose was 500 kGy, the molecular weight of the waste PU drastically decreased. Also, the mechanical properties of waste PU were approximately 4 times lower than those of non-irradiated PU. This study has confirmed the possibility of making fine particle of waste PU for recycling through radiation degradation techniques.

  2. Blue Ribbon Panel Report

    Science.gov (United States)

    An NCI Cancer Currents blog by the NCI acting director thanking the cancer community for contributing to the Cancer Moonshot Blue Ribbon Panel report, which was presented to the National Cancer Advisory Board on September 7.

  3. New York Blue

    Data.gov (United States)

    Federal Laboratory Consortium — New York Blue is used cooperatively by the Laboratory and Stony Brook University as part of the New York Center for Computation Sciences. Ranked as the 28th fastest...

  4. Development of an automatic visual grading system for grafting seedlings

    Directory of Open Access Journals (Sweden)

    Subo Tian

    2017-01-01

    Full Text Available In this study, a visual grading system of vegetable grafting machine was developed. The study described key technology of visual grading system of vegetable grafting machine. First, the contrasting experiment was conducted between acquired images under blue background light and natural light conditions, with the blue background light chosen as lighting source. The Visual C++ platform with open-source computer vision library (Open CV was used for the image processing. Subsequently, maximum frequency of total number of 0-valued pixels was predicted and used to extract the measurements of scion and rootstock stem diameters. Finally, the developed integrated visual grading system was experimented with 100 scions and rootstock seedlings. The results showed that success rate of grading reached up to 98%. This shows that selection and grading of scion and rootstock could be fully automated with this developed visual grading system. Hence, this technology would be greatly helpful for improving the grading accuracy and efficiency.

  5. Synthesis and Characterization of Cellulose Nanofibril-Reinforced Polyurethane Foam

    Directory of Open Access Journals (Sweden)

    Weiqi Leng

    2017-11-01

    Full Text Available In this study, traditional polyol was partially replaced with green, environmentally friendly cellulose nanofibrils (CNF. The effects of CNF on the performance of CNF-reinforced polyurethane foam nanocomposites were investigated using scanning electron microscopy, Fourier transform infrared spectroscopy (FT-IR, X-ray diffraction (XRD analysis, thermogravimetric analysis (TGA, differential scanning calorimetry (DSC, dynamic mechanical analysis (DMA, and a compression test. The results showed that the introduction of CNF into the polyurethane matrix not only created stronger urethane bonding between the hydroxyl groups in the cellulose chain and isocyanate groups in polymethylene polyphenylisocyanate, but also developed an additional filler–matrix interaction between CNF and polyurethane. With the increase of the CNF replacement ratio, a higher glass transition temperature was obtained, and a higher amount of char residue was generated. In addition, an increase of up to 18-fold in compressive strength was achieved for CNF-PUF (polyurethane foam nanocomposites with a 40% CNF replacement ratio. CNF has proved to be a promising substitute for traditional polyols in the preparation of polyurethane foams. This study provides an interesting method to synthesize highly green bio-oriented polyurethane foams.

  6. Hydroxyapatite-silver nanoparticles coatings on porous polyurethane scaffold.

    Science.gov (United States)

    Ciobanu, Gabriela; Ilisei, Simona; Luca, Constantin

    2014-02-01

    The present paper is focused on a study regarding the possibility of obtaining hydroxyapatite-silver nanoparticle coatings on porous polyurethane scaffold. The method applied is based on a combined strategy involving hydroxyapatite biomimetic deposition on polyurethane surface using a Supersaturated Calcification Solution (SCS), combined with silver ions reduction and in-situ crystallization processes on hydroxyapatite-polyurethane surface by sample immersing in AgNO3 solution. The morphology, composition and phase structure of the prepared samples were characterized by scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM-EDX), X-ray diffraction (XRD), UV-Vis spectroscopy and X-ray photoelectron spectroscopy (XPS) measurements. The data obtained show that a layer of hydroxyapatite was deposited on porous polyurethane support and the silver nanoparticles (average size 34.71 nm) were dispersed among and even on the hydroxyapatite crystals. Hydroxyapatite/polyurethane surface acts as a reducer and a stabilizing agent for silver ions. The surface plasmon resonance peak in UV-Vis absorption spectra showed an absorption maximum at 415 nm, indicating formation of silver nanoparticles. The hydroxyapatite-silver polyurethane scaffolds were tested against Staphylococcus aureus and Escherichia coli and the obtained data were indicative of good antibacterial properties of the materials. © 2013.

  7. Polyurethane foam-covered breast implants: a justified choice?

    Science.gov (United States)

    Scarpa, C; Borso, G F; Vindigni, V; Bassetto, F

    2015-01-01

    Even if the safety of the polyurethane prosthesis has been the subject of many studies and professional and public controversies. Nowadays, polyurethane covered implants are very popular in plastic surgery for the treatment of capsular contracture. We have identified 41 papers (1 is a communication of the FDA) by using search browsers such as Pubmed, Medline, and eMedicine. Eleven manuscripts have been used for an introduction, and the remaining thirty have been subdivided into three tables whose results have been summarized in three main chapters: (1) capsular formation and contracture, (2) complications, (3) biodegradation and cancer risk. (1) The polyurethanic capsule is a well defined foreign body reaction characterized by synovial metaplasia, a thin layer of disarranged collagen fibers and a high vascularization. These features make possible a "young" capsule and a low occurrence of capsular contracture even over a long period (10 years); (2) the polyurethane implants may be difficult to remove but there is no evidence that they cause an increase in the other complications; (3) there is no evidence of polyurethane related cancer in long-term studies (after 5 years). Polyurethane foam covered breast implants remain a valid choice for the treatment of capsular contracture even if it would be very useful to verify the ease of removal of the prosthesis and to continue investigations on biodegradation products.

  8. Mechanical and morphological characterization of a bio-nanocomposite hydroxyapatite / polyurethane; Caracterizacao mecanica e morfologica de um bionanocomposito hidroxiapatita/poliuretano

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Sabina da Memoria Cardoso de, E-mail: sabina_memoria@yahoo.com.br [Instituto Federal de Educacao Ciencia e Tecnologia do Para (IFPA), Belem, PA (Brazil); Dias, Carmen Gilda Barroso Tavares [Universidade Federal do Para (UFPA), Belem, PA (Brazil). Departamento de Engenharia Mecanica; Zavaglia, Cecilia Amelia de Carvalho [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Departamento de Engenharia Mecanica

    2011-07-01

    Nanocomposites based on biocompatible polymers and hydroxyapatite are wide acceptance as bone grafts, the composition, structure and similarity to natural bone and also due to the properties functional, such as surface and mechanical strength. This work there was the making of a bionanocomposite, using nanostructured hydroxyapatite interconnected by polyurethane, generated from the actions of poly(vinylalcohol) and toluene isocyanate HDT. The formation kinetics was monitored by the bionanocomposite spectroscopy and Fourier transform infrared FTIR. The material showed good properties both mechanical and morphology. (author)

  9. Wound closure with human keratinocytes cultured on a polyurethane dressing overlaid on a cultured human dermal replacement.

    Science.gov (United States)

    Rennekampff, H O; Hansbrough, J F; Kiessig, V; Abiezzi, S; Woods, V

    1996-07-01

    Burn excision followed by immediate wound coverage has become the clinical standard for managing extensive burn injuries in much of the world. When sufficient autograft skin to achieve permanent wound closure is unavailable, cell culture technology has made the use of cultured human keratinocyte (HK) sheets clinically feasible. Whereas previous techniques have focused on development of multilayered, differentiated HK sheets, our attention has been drawn to using HK in a highly proliferative, less differentiated state. Time requirements for preparation of multistratified cultured HK are high, and preparatory steps may destroy important integrin adhesion molecules. We describe the use of HK cultured to single layer confluence on a polyurethane membrane(HD), with serum-free medium. HK-HD grafts were transplanted to full-thickness wounds on athymic mice (n = 31). A second group of mice (DG-HK-HD), n = 28) received a living human dermal replacement containing cultured fibroblasts before placement of HK-HD. Control mice received HD alone (n = 4). Basement membrane proteins on healed wounds and surface integrins on cultured HK were identified by means of immunostaining and direct microscopic visualization. HK cultured just to the confluent state on polyurethane membrane were positive for integrins alpha(5) and alpha(6), major integrins on proliferating HK. Histologic analysis showed epithelialized wounds in all groups after 21 days. Using an anti-human involucrin antibody we demonstrated the presence of HK in 64.5% of the HK-HD group, 61% of the DG-HK-HD group, and 0% in the HD group. Mice that received the living human dermal replacement containing cultured fibroblasts in combination with HK-HD grafts developed a thick, well-vascularized neodermis. Strong laminin and collagen IV staining was observed in wound areas covered with HK. These data show that full-thickness wounds can be closed by application of a single layer of proliferating HK cultured on a biocompatible

  10. Zwitterionic sulfobetaine polymer-immobilized surface by simple tyrosinase-mediated grafting for enhanced antifouling property.

    Science.gov (United States)

    Kwon, Ho Joon; Lee, Yunki; Phuong, Le Thi; Seon, Gyeung Mi; Kim, Eunsuk; Park, Jong Chul; Yoon, Hyunjin; Park, Ki Dong

    2017-10-01

    Introducing antifouling property to biomaterial surfaces has been considered an effective method for preventing the failure of implanted devices. In order to achieve this, the immobilization of zwitterions on biomaterial surfaces has been proven to be an excellent way of improving anti-adhesive potency. In this study, poly(sulfobetaine-co-tyramine), a tyramine-conjugated sulfobetaine polymer, was synthesized and simply grafted onto the surface of polyurethane via a tyrosinase-mediated reaction. Surface characterization by water contact angle measurements, X-ray photoelectron spectroscopy and atomic force microscopy demonstrated that the zwitterionic polymer was successfully introduced onto the surface of polyurethane and remained stable for 7days. In vitro studies revealed that poly(sulfobetaine-co-tyramine)-coated surfaces dramatically reduced the adhesion of fibrinogen, platelets, fibroblasts, and S. aureus by over 90% in comparison with bare surfaces. These results proved that polyurethane surfaces grafted with poly(sulfobetaine-co-tyramine) via a tyrosinase-catalyzed reaction could be promising candidates for an implantable medical device with excellent bioinert abilities. Antifouling surface modification is one of the key strategy to prevent the thrombus formation or infection which occurs on the surface of biomaterial after transplantation. Although there are many methods to modify the surface have been reported, necessity of simple modification technique still exists to apply for practical applications. The purpose of this study is to modify the biomaterial's surface by simply immobilizing antifouling zwitterion polymer via enzyme tyrosinase-mediated reaction which could modify versatile substrates in mild aqueous condition within fast time period. After modification, pSBTA grafted surface becomes resistant to various biological factors including proteins, cells, and bacterias. This approach appears to be a promising method to impart antifouling property on

  11. Axillobifemoral bypass grafting

    Directory of Open Access Journals (Sweden)

    Davidović Lazar B.

    2004-01-01

    Full Text Available INTRODUCTION Axillo-femoral bypass (AxF means connecting the axillar and femoral artery with the graft that is placed subcutaneously [1]. Usually, this graft is connected with contralateral femoral artery via one accessory subcutaneous graft, and this connection is known as axillobifemoral bypass (AxFF. This extra-anatomic procedure is an alternative method to the standard reconstruction of aortoiliac region when there are contraindications for general or local reasons. OBJECTIVE The objective of this paper is to show early and late results of AxFF bypass grafting as well as to show the indications for AxFF bypass. METHODS The sample consisted of 37 patients. The procedure was performed in 28 patients who suffered from aortoiliac occlusive disease and who were at high risk due to the comorbidity- in one patient with the rupture of juxtarenal aneurysm of abdominal aorta; in five patients with aortoenteric fistula, in two patients with iatrogenic lesion of abdominal aorta and in one female patient with anus preternaturalis definitivus who was treated for rectovaginal fistula. Donor's right axillary artery was used in 26 cases (70.3%, and donor's left axillary artery was used in 9 cases (29.7%. Dacron graft was used in 34 patients and Polytetrafluo-roethlylene graft was used in three patients. Simultaneously, profundo-plastic was done in four patients and femoro-popliteal bypass was performed in three patients. In five patients who suffered from aortoenteric fistula, simultaneous intervention of gastrointerstinal system has been done, x2 test was used for statistical evaluation and life table method was used for verification of late graft patency. RESULTS The rate of early postoperative mortality was 13.5%. The causes of death were: sepsis -1, MOFS - 3, and infarct myocardium -1. The mean follow up period was 40.1 months, ranging from six months to 17 years. During the follow up period, an early graft thrombosis was identified in two and late graft

  12. Kinetic and thermodynamic analysis of the polymerization of polyurethanes by a rheological method

    Energy Technology Data Exchange (ETDEWEB)

    Lucio, Beatriz; Fuente, José Luis de la, E-mail: fuentegj@inta.es

    2016-02-10

    Graphical abstract: - Highlights: • Kinetic and thermodynamic analysis for the formation of a functional polyurethane (PU) has been carried out. • Rheological parameters were used to obtain the profile of the resin's curing degree. • Kamal-Sourour autocatalytic kinetic model describes well this polyaddition reaction. • A deeper understanding of the mechanism of PU systems has been achieved. • This metallo-PU finds its application in the chemistry of advanced energetic materials. - Abstract: As part of an investigation into the mechanism and chemorheology of linear segmented polyurethane (PU) systems, this paper presents the kinetic and thermodynamic characterization of the reaction between an advanced functional metallo-polyol derivative of hydroxyl-terminated polybutadiene (HTPB), (ferrocenylbutyl)dimethylsilane grafted HTPB, and isophorone diisocyanate (IPDI). The evolution of viscoelastic properties, such as the storage modulus (G′), was recorded in bulk under isothermal conditions at four different temperatures between 50 and 80 °C, and a resin curing degree profile was obtained for this elastic modulus. The use of the Kamal-Sourour autocatalytic kinetic model was proposed, describing the overall curing process perfectly. All the kinetic and thermodynamic parameters, including reaction orders, kinetic constants and activation energy, were determined for the polyaddition reaction under study. A relevant autocatalysis effect, promoted by the urethane group, has been found. The isoconversion method was also used to analyze the variation of the global activation energy with conversion. The global activation energy increases slightly as the curing reaction proceeds with a maximum value reached at approximately 30% conversion. In addition, the Eyring parameters were calculated from the obtained kinetic data.

  13. Nanoclay Dispersion and its Effect on Properties of Waterborne Polyurethanes

    Directory of Open Access Journals (Sweden)

    H. Honarkar

    2014-01-01

    Full Text Available In recent years, waterborne polyurethanes as in coatings and adhesives formulations have attracted considerable attention because they are non-toxic, non-flammable and friendly to environment. Besides environmental management, the flexibility, low temperature property, high tensile strength, good adhesion and improved rheological property are specific properties of waterborne polyurethanes. Also low production cost of water borne polyurethanes over solvent-borne polyurethanes is also a reason for their applications. However, these materials have some defects such as weak water resistance and low adhesion in the moisture environment due to sensitivity of their hydrophilic ionic bonds, ether groups, urethane and ester groups to hydrolysis which need to be improved. Also, low heat resistance of these materials is due to a relatively low crystalline melting point or glass transition temperature of hard segments. One of the ways to solve this problem and improve its properties for different applications is the addition of inorganic fillers especially nano-sized layered silicates within polyurethane matrix. In this way water resistance, heat resistance, mechanical properties and modulus increase simultaneously. In this research, waterborne polyurethane nanocomposites with PTMG polyol, IPDI, DMPA (internal emulsifier, TEA (neutralizer and 1, 3 and 5weight % of Cloisite 30B as reinforcement were synthesized and characterized. Polarity of the samples was investigated by contact angle test and dispersion of nano particles in the samples was characterized by X-Ray and TEM, Thermal properties and dynamic mechanical properties were measured by TGA and DMTA, respectively. The results showed that incorporation of clay into polyurethanes did reduce water absorption and increased heat resistance, modulus, particle size and contact angle.In recent years, waterborne polyurethanes including coatings and adhesives have attracted considerable attention because they

  14. IDENTIFICATION OF CFC AND HCFC SUBSTITUTES FOR BLOWING POLYURETHANE FOAM INSULATION PRODUCTS

    Science.gov (United States)

    The report gives results of a cooperative effort to identiry chlorofluorocarbons and hydrochlorofluorocarbon substitutes for blowing polyurethane foam insulation products. The substantial ongoing effort is identifying third-generation blowing agets for polyurethane foams to repla...

  15. Grafts for Ridge Preservation

    Science.gov (United States)

    Jamjoom, Amal; Cohen, Robert E.

    2015-01-01

    Alveolar ridge bone resorption is a biologic phenomenon that occurs following tooth extraction and cannot be prevented. This paper reviews the vertical and horizontal ridge dimensional changes that are associated with tooth extraction. It also provides an overview of the advantages of ridge preservation as well as grafting materials. A Medline search among English language papers was performed in March 2015 using alveolar ridge preservation, ridge augmentation, and various graft types as search terms. Additional papers were considered following the preliminary review of the initial search that were relevant to alveolar ridge preservation. The literature suggests that ridge preservation methods and augmentation techniques are available to minimize and restore available bone. Numerous grafting materials, such as autografts, allografts, xenografts, and alloplasts, currently are used for ridge preservation. Other materials, such as growth factors, also can be used to enhance biologic outcome. PMID:26262646

  16. [Chickenpox, burns and grafts].

    Science.gov (United States)

    Rojas Zegers, J; Fidel Avendaño, L

    1979-01-01

    An outbreak of chickenpox that occurred at the Burns Repair Surgery Unit, Department of Children's Surgery, Hospital R. del Río, between June and November, 1975, is reported. 27 cases of burned children were studied, including analysis of correlations of the stages and outcome of the disease (varicela), the trauma (burns) and the graft (repair surgery). As a result, the authors emphasize the following findings: 1. Burns and their repair are not aggravating factors for varicella. In a small number of cases the exanthema looked more confluent in the graft surgical areas and in the first degree burns healing spontaneously. 2. Usually there was an uneventful outcome of graft repair surgery on a varicella patient, either during the incubation period, the acme or the convalescence. 3. The fact that the outmost intensity of secondary viremia of varicella occurs before the onset of exanthemia, that is, during the late incubation period, is confirmed.

  17. SPECIFIC FEATURES OF OLIGOMERIC PRODUCT SOLIDIFICATION FROM POLYURETHANE WASTES AND THEIR PRACTICAL APPLICATION

    OpenAIRE

    V. Belyatsky; Yu. Kryvogus

    2012-01-01

    The paper considers a possibility to use secondary polyurethane obtained by  thermal depolymerization of wastes on the basis of cross-linked polyurethane (polyurethane adduct) and isocyanate. An effect of density dependence of the obtained polyurethane samples on nature and quantity of solvent has been revealed and it is significantly observed while using low-boiling solvents. The influence of adduct/solidification agent ratio on mechanical hardness of the obtained samples has been studied in...

  18. Arteriovenous shunt graft ulceration with sinus and graft epithelialization

    Directory of Open Access Journals (Sweden)

    Pooja Singhal

    2015-03-01

    Full Text Available Arteriovenous fistula and grafts are used as access sites for patients with chronic kidney disease and are prone for complications. Stent grafts are used to treat access site complications. We report a rare and unusual finding of epithelialization of the sinus tract and the lumen of a polytetrafluoroethylene graft, following ulceration of the overlying skin.

  19. Natural Blue Food Colour

    DEFF Research Database (Denmark)

    Roda-Serrat, Maria Cinta

    In recent years, there has been a growing tendency to avoid the use of artificial colorants and additives in food products, especially after some studies linked their consumption with behavioural changes in children. However, the incorporation of colorants from natural origin remains a challenge...... for food technologists, as these are typically less vivid and less stable than their synthetic alternatives. Regarding blue colorants, phycocyanins from cyanobacteria are currently in the spotlight as promising new natural blue colorants. Phycocyanins are proteins which blue colour results from...... the presence of the chromophore phycocyanobilin (PCB), a covalently attached linear tetrapyrrole. The applications of phycocyanins as food colorants are however limited, as they show poor stability in certain conditions of pH, light and temperature. Cleavage of PCB from the protein followed by careful product...

  20. Polyurethane Organosilicate Nanocomposites as Blood Compatible Coatings

    Directory of Open Access Journals (Sweden)

    Johnson H. Y. Chung

    2012-02-01

    Full Text Available Polymer clay nanocomposites (NCs show remarkable potential in the field of drug delivery due to their enhanced barrier properties. It is hypothesised that well dispersed clay particles within the polymer matrix create a tortuous pathway for diffusing therapeutic molecules, thereby resulting in more sustained release of the drug. As coatings for medical devices, these materials can simultaneously modulate drug release and improve the mechanical performance of an existing polymer system without introducing additional materials with new chemistries that can lead to regulatory concerns. In this study, polyurethane organosilicate nanocomposites (PUNCs coated onto stainless steel wires were evaluated for their feasibility as blood compatible coatings and as drug delivery systems. Heparin was selected as the model drug to examine the impact of silicate loading and modifier chain length in modulating release. Findings revealed that better dispersion was achieved from samples with lower clay loadings and longer alkyl chains. The blood compatibility of PUNCs as assessed by thrombin generation assays showed that the addition of silicate particles did not significantly decrease the thrombin generation lag time (TGT, p = 0.659 or the peak thrombin (p = 0.999 of polyurethane (PU. PUNC coatings fabricated in this research were not cytotoxic as examined by the cell growth inhibition assay and were uniformly intact, but had slightly higher growth inhibition compared to PU possibly due to the presence of organic modifiers (OM. The addition of heparin into PUNCs prolonged the TGT, indicating that heparin was still active after the coating process. Cumulative heparin release profiles showed that the majority of heparin released was from loosely attached residues on the surface of coils. The addition of heparin further prolonged the TGT as compared to coatings without added heparin, but a slight decrease in heparin activity was observed in the NCs

  1. Rheokinetics and effect of shear rate on the kinetics of linear polyurethane formation

    NARCIS (Netherlands)

    Navarchian, AH; Picchioni, F; Janssen, LPBM

    In this article, the rheokinetics of polyurethane formation and the influence of shear rate on its kinetics have been studied. Two different linear polyurethane systems with 0% and 100% hard segments are examined in a cone and plate rheometer. The isothermal increase of viscosity during polyurethane

  2. Polyurethanes for potential use in transparent armour investigated using DSC and DMA

    NARCIS (Netherlands)

    Ekeren, P.J. van; Carton, E.P.

    2011-01-01

    A material combination that may be applied as transparent armour is glass-clad polyurethane. These are comprised of a relatively thin glass strike face and a relatively thick (transparent) polyurethane backing layer. Three transparent polyurethane samples were investigated using differential

  3. 40 CFR 63.1294 - Standards for slabstock flexible polyurethane foam production-diisocyanate emissions.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 11 2010-07-01 2010-07-01 true Standards for slabstock flexible polyurethane foam production-diisocyanate emissions. 63.1294 Section 63.1294 Protection of Environment... Flexible Polyurethane Foam Production § 63.1294 Standards for slabstock flexible polyurethane foam...

  4. 40 CFR 63.1293 - Standards for slabstock flexible polyurethane foam production.

    Science.gov (United States)

    2010-07-01

    ... polyurethane foam production. 63.1293 Section 63.1293 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... CATEGORIES National Emission Standards for Hazardous Air Pollutants for Flexible Polyurethane Foam Production § 63.1293 Standards for slabstock flexible polyurethane foam production. Each owner or operator of a...

  5. 40 CFR 63.1300 - Standards for molded flexible polyurethane foam production.

    Science.gov (United States)

    2010-07-01

    ... polyurethane foam production. 63.1300 Section 63.1300 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... CATEGORIES National Emission Standards for Hazardous Air Pollutants for Flexible Polyurethane Foam Production § 63.1300 Standards for molded flexible polyurethane foam production. Each owner or operator of a new...

  6. A Blue Lagoon Function

    DEFF Research Database (Denmark)

    Markvorsen, Steen

    2007-01-01

    We consider a specific function of two variables whose graph surface resembles a blue lagoon. The function has a saddle point $p$, but when the function is restricted to any given straight line through $p$ it has a {\\em{strict local minimum}} along that line at $p$.......We consider a specific function of two variables whose graph surface resembles a blue lagoon. The function has a saddle point $p$, but when the function is restricted to any given straight line through $p$ it has a {\\em{strict local minimum}} along that line at $p$....

  7. Fluorinated hyperbranched polyurethane electrospun nanofibrous membrane: fluorine-enriching surface and superhydrophobic state with high adhesion to water.

    Science.gov (United States)

    Zheng, Fei; Deng, Hongtao; Zhao, Xinjun; Li, Xia; Yang, Can; Yang, Yunyan; Zhang, Aidong

    2014-05-01

    The fluorination of hyperbranched polyurethane (HPU) was achieved by atom transfer radical grafting polymerization (ATRgP) of dodecafluoroheptyl methacrylate that was initiated from 2-bromoisobutyryl bromide-modified end groups of HPU. The nanofibrous membrane of fluorinated HPU was prepared by electrospinning. The structure of fluorinated HPU was characterized by Fourier-transform infrared spectroscopy (FTIR) and (1)H nuclear magnetic resonance spectrum (1H NMR). The surface of nanofibrous membrane was investigated with scanning electron microscope (SEM), atomic force microscope (AFM), X-ray photoelectron spectroscopy (XPS) and water contact angle (WCA) analysis, respectively. The results suggested that compared with the reported linear fluorine-containing polyurethane materials, rather high fluorine content up to 29.14% was achieved on the surface of fluorinated HPU nanofibrous membrane. Meanwhile, a superhydrophobic surface (WCA 159.7°) with high adhesion to water was successfully fabricated via a convenient electrospinning process. The prepared material is promising for the application in microfluidic devices. Copyright © 2014 Elsevier Inc. All rights reserved.

  8. Graft nephrectomy: The SGPGI experience

    OpenAIRE

    Nand Kishore Arvind; Aneesh Srivastava; Anant Kumar; Subodh K Das

    2002-01-01

    Background: Graft nephrectomy is often considered a hazardous procedure with high morbidity and occasional mortality, and this may pose a technical challenge. The aim of this study was to evaluate the indications, etiology and complications following graft nephrectomy. Materials and Methods: From 1988 to 2001, among total of 1,019 live related renal transplants carried at our center, 46 underwent graft nephrectomy. Patients were divided into 2 groups depending on timing of graft re-mova...

  9. Unified Creep Plasticity Damage (UCPD) Model for Rigid Polyurethane Foams.

    Energy Technology Data Exchange (ETDEWEB)

    Neilsen, Michael K. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Lu, Wei-Yang [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Scherzinger, William M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hinnerichs, Terry D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Lo, Chi S. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-06-01

    Numerous experiments were performed to characterize the mechanical response of several different rigid polyurethane foams (FR3712, PMDI10, PMDI20, and TufFoam35) to large deformation. In these experiments, the effects of load path, loading rate, and temperature were investigated. Results from these experiments indicated that rigid polyurethane foams exhibit significant volumetric and deviatoric plasticity when they are compressed. Rigid polyurethane foams were also found to be very strain-rate and temperature dependent. These foams are also rather brittle and crack when loaded to small strains in tension or to larger strains in compression. Thus, a new Unified Creep Plasticity Damage (UCPD) model was developed and implemented into SIERRA with the name Foam Damage to describe the mechanical response of these foams to large deformation at a variety of temperatures and strain rates. This report includes a description of recent experiments and experimental findings. Next, development of a UCPD model for rigid, polyurethane foams is described. Selection of material parameters for a variety of rigid polyurethane foams is then discussed and finite element simulations with the new UCPD model are compared with experimental results to show behavior that can be captured with this model.

  10. Response of Polyurethane to Shock Waves: An Experimental Investigation

    Science.gov (United States)

    Jayaram, V.; Rao, Keshava Subba; Thanganayaki, N.; Kumara, H. K. T.; Reddy, K. P. J.

    Formation of polyurethane (PU) in vacuum environment and controlling density of polyurethane foams are the present day challenges. Polyurethane exists in numerous forms ranging from flexible to rigid and lightweight foams to tough, stiff elastomers [1]. PU can be used to produce lightweight foams for insulation or hard rubber used as wheels to transport heavy loads and it can be used in high pressure applications. The largest volumes of commercial PU elastomers are made from toluene diisocyanate (TDI) or diphenylmethane-4, 4'-diisocyanate (MDI) [2]. Linear polyurethanes can be processed into final products by any of the standard thermoplastic processes (injection molding, extrusion, thermoforming) as well as by low pressure cast processes in presence of catalysts. Tin, tetrabutyl titanate and zirconium chelates are few effective catalysts used to produce polyurethane for particular application [3]. Thermoset elastomers are formed due to irreversible cross-links, when polymers are chemically cured. Highly porous biodegradable PU was synthesized by thermally induced phase separation technique used in tissue engineering and also in bio-degradable based fluids [4]. Properties of PU like hardness, stress/strain modulus, tear strength etc, was determine using ASTM (American Society for Testing and Materials) standard methods. PU possesses extremely high mechanical properties, excellent abrasion, tear and extrusion resistance. It has outstanding low-temperature limit (-600C) and high temperature limit up to (1500C).

  11. Haemodynamics in axillobifemoral bypass grafts

    NARCIS (Netherlands)

    C.H. Wittens

    1992-01-01

    textabstractThis thesis is based on four publications on the subject of graft configuration and haemodynamics in axillobifemoral bypass grafts: 1. A clinical evaluation of 17 patients with axillobifemoral bypass graft operations, performed for various indications. Two important observations were

  12. Carboxylated Polyurethanes Containing Hyperbranched Polyester Soft Segments

    Directory of Open Access Journals (Sweden)

    Žigon, M.

    2006-09-01

    Full Text Available hyperbranched polyester soft segments (HB PU with functional carboxylic groups in order to enable the preparation of stable HB PU dispersions. Carboxylated hyperbranched polyurethanes were synthesized using a hyperbranched polyester based on 2,2-bis(methylolpropionic acid of the fourth pseudo-generation (Boltorn H40 and hexamethylene (HDI or isophorone diisocyanate (IPDI. The reactivity of hyperbranched polyester with HDI was lower than expected, possibly due to the presence of less reactive hydroxyl groups in the linear repeat units. A gel was formed at mole ratios rNCO/OH = 1:2 or 1:4. The synthesis of HB PU was performed with partly esterified hyperbranched polyester with lowered hydroxyl functionality. The carboxyl groups were incorporated in the HB PU backbone by reaction of residual hydroxyl groups with cis-1,2-cyclohexanedicarboxylic anhydride. HB PU aqueous dispersions were stable at least for two months, although their films were brittle. The tensile strength and Young's modulus of blends of linear and HB PU decreased with increasing content of HB PU whereas elongation at break remained nearly constant, which was explained in terms of looser chain packing due to more open tree-like hyperbranched structures.

  13. Melt electrospinning of biodegradable polyurethane scaffolds.

    Science.gov (United States)

    Karchin, Ari; Simonovsky, Felix I; Ratner, Buddy D; Sanders, Joan E

    2011-09-01

    Electrospinning from a melt, in contrast to from a solution, is an attractive tissue engineering scaffold manufacturing process as it allows for the formation of small diameter fibers while eliminating potentially cytotoxic solvents. Despite this, there is a dearth of literature on scaffold formation via melt electrospinning. This is likely due to the technical challenges related to the need for a well-controlled high-temperature setup and the difficulty in developing an appropriate polymer. In this paper, a biodegradable and thermally stable polyurethane (PU) is described specifically for use in melt electrospinning. Polymer formulations of aliphatic PUs based on (CH(2))(4)-content diisocyanates, polycaprolactone (PCL), 1,4-butanediamine and 1,4-butanediol (BD) were evaluated for utility in the melt electrospinning process. The final polymer formulation, a catalyst-purified PU based on 1,4-butane diisocyanate, PCL and BD in a 4/1/3M ratio with a weight-average molecular weight of about 40kDa, yielded a nontoxic polymer that could be readily electrospun from the melt. Scaffolds electrospun from this polymer contained point bonds between fibers and mechanical properties analogous to many in vivo soft tissues. Copyright © 2011 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

  14. Isothermal recovery rates in shape memory polyurethanes

    International Nuclear Information System (INIS)

    Azra, Charly; Plummer, Christopher J G; Månson, Jan-Anders E

    2011-01-01

    This work compares the time dependence of isothermal shape recovery in thermoset and thermoplastic shape memory polyurethanes (SMPUs) with comparable glass transition temperatures. In each case, tensile tests have been used to quantify the influence of various thermo-mechanical programming parameters (deformation temperature, recovery temperature, and stress and storage times following the deformation step) on strain recovery under zero load (free recovery) and stress recovery under fixed strain (constrained recovery). It is shown that the duration of the recovery event may be tuned over several decades of time with an appropriate choice of programming parameters, but that there is a trade-off between the rate of shape recovery and the recoverable stress level. The results are discussed in terms of the thermal characteristics of the SMPUs in the corresponding temperature range as characterized by modulated differential scanning calorimetry and dynamic mechanical analysis, with the emphasis on the role of the effective width of the glass transition temperature and the stability of the network that gives rise to the shape memory effect. (fast track communication)

  15. Nano-Aramid Fiber Reinforced Polyurethane Foam

    Science.gov (United States)

    Semmes, Edmund B.; Frances, Arnold

    2008-01-01

    Closed cell polyurethane and, particularly, polyisocyanurate foams are a large family of flexible and rigid products the result of a reactive two part process wherein a urethane based polyol is combined with a foaming or "blowing" agent to create a cellular solid at room temperature. The ratio of reactive components, the constituency of the base materials, temperature, humidity, molding, pouring, spraying and many other processing techniques vary greatly. However, there is no known process for incorporating reinforcing fibers small enough to be integrally dispersed within the cell walls resulting in superior final products. The key differentiating aspect from the current state of art resides in the many processing technologies to be fully developed from the novel concept of milled nano pulp aramid fibers and their enabling entanglement capability fully enclosed within the cell walls of these closed cell urethane foams. The authors present the results of research and development of reinforced foam processing, equipment development, strength characteristics and the evolution of its many applications.

  16. Polyurethane biocompatible silver bionanocomposites for biomedical applications

    Science.gov (United States)

    Filip, D.; Macocinschi, D.; Paslaru, E.; Munteanu, B. S.; Dumitriu, R. P.; Lungu, M.; Vasile, C.

    2014-11-01

    Bionanocomposite membranes based on polyurethane (PU), extracellular matrix (EM), and silver nanoparticles (AgNPs) were prepared by applying both solvent casting method and electrospinning/electrospraying method. PU-EM-Ag compositions were electrospun/electrosprayed onto PU membrane to realize improved biocompatible biomaterials. Surface morphological characteristics and wettability properties were investigated by SEM and AFM techniques and water contact angle measurements. Water contact angle depends on surface chemistry and the two methods employed for preparation of biomembranes as well as roughness of the membrane surfaces. Rheological study brings information on electrospinability of the polymer solutions/dispersions. Silver nanoparticles greatly influence the electrospinability of the polymer dispersions because of the increase in dynamic viscosity with the increasing silver content. Native PU and PU incorporated with low contents of AgNPs less than 0.3 % show high cell proliferation and good biocompatibility. The electrospun PU-EM-Ag nanobiocomposite membranes bring the advantage of using of low amounts of bioactive and biocidal components. The obtained silver nanobiocomposite membranes possess good bioactivity and non-cytotoxicity necessary for biomedical device applications. The obtained nanobiocomposite membranes are expected to find application for medical devices such as urinary catheters, wound dressings, etc.

  17. Shape memory of polyurethanes with silver nanoparticles

    International Nuclear Information System (INIS)

    Monteiro, Fernanda M.A.; Souza, Patterson P. de; Pereira, Iaci M.; Silva, Livio B.J. da; Orefice, Rodrigo L.

    2011-01-01

    Biodegradable polyurethane nano composites were synthesized in an aqueous environment and have their shape memory properties investigated. The matrix based in isopharane diisocyanate and poly(caprolactone diol) (Mn=1250, 2000 g.mol -1 ) was prepared by the prepolymer mixing process. The silver nanoparticles were produced by mixing AgNO 3 and tannic acid. The shape memory properties were measured using universal testing machine (DL3000, EMIC). The shape memory cycle consisted of the following steps: samples were deformed at room temperature; the mechanical constraints on the polymers were removed; samples were cooled down to 0 deg C and to retain the deformed shape; three processes were tested to recover the shape: (a) samples were heated up to 80 deg C in an oven, (b) immersed in pH 4.0 and (c) immersed in pH 7.0. To study the shape memory effect on the nanostructure, small angle X-ray scattering, wide angle X-ray scattering, infrared spectroscopy experiments were carried on. (author)

  18. Acrylonitrile grafted to PVDF

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Jin; Eitouni, Hany Basam

    2015-03-31

    PVDF-g-PAN has been synthesized by grafting polyacrylonitrile onto polyvinylidene fluoride using an ATRP/AGET method. The novel polymer is ionically conducive and has much more flexibility than PVDF alone, making it especially useful either as a binder in battery cell electrodes or as a polymer electrolyte in a battery cell.

  19. Aortic Graft Infection Secondary to Iatrogenic Transcolonic Graft Malposition.

    Science.gov (United States)

    Blank, Jacqueline J; Rothstein, Abby E; Lee, Cheong Jun; Malinowski, Michael J; Lewis, Brian D; Ridolfi, Timothy J; Otterson, Mary F

    2018-01-01

    Aortic graft infections are a rare but devastating complication of aortic revascularization. Often infections occur due to contamination at the time of surgery. Iatrogenic misplacement of the limbs of an aortobifemoral graft is exceedingly rare, and principles of evaluation and treatment are not well defined. We report 2 cases of aortobifemoral bypass graft malposition through the colon. Case 1 is a 54-year-old male who underwent aortobifemoral bypass grafting for acute limb ischemia. He had previously undergone a partial sigmoid colectomy for diverticulitis. Approximately 6 months after vascular surgery, he presented with an occult graft infection. Preoperative imaging and intraoperative findings were consistent with graft placement through the sigmoid colon. Case 2 is a 60-year-old male who underwent aortobifemoral bypass grafting due to a nonhealing wound after toe amputation. His postoperative course was complicated by pneumonia, bacteremia thought to be secondary to the pneumonia, general malaise, and persistent fevers. Approximately 10 weeks after the vascular surgery, he presented with imaging and intraoperative findings of graft malposition through the cecum. Aortic graft infection is usually caused by surgical contamination and presents as an indolent infection. Case 1 presented as such; Case 2 presented more acutely. Both grafts were iatrogenically misplaced through the colon at the index operation. The patients underwent extra-anatomic bypass and graft explantation and subsequently recovered.

  20. The "Blue Banana" Revisited

    NARCIS (Netherlands)

    Faludi, A.K.F.

    2015-01-01

    This essay is about the “Blue Banana”. Banana is the name given subsequently by others to a Dorsale européenne (European backbone) identified empirically by Roger Brunet. In a background study to the Communication of the European Commission ‘Europe 2000’, Klaus Kunzmann and Michael Wegener put

  1. The Blue Baby Syndrome

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 8; Issue 10. The Blue Baby Syndrome - Nitrate Poisoning in Humans. Deepanjan Majumdar. General Article Volume 8 Issue 10 October 2003 pp 20-30. Fulltext. Click here to view fulltext PDF. Permanent link:

  2. Direct transfer of graphene films for polyurethane substrate

    International Nuclear Information System (INIS)

    Vilani, C.; Romani, E.C.; Larrudé, D.G.; Barbosa, Gelza M.; Freire, F.L.

    2015-01-01

    Highlights: • Graphene was prepared by CVD using copper foils as substrates. • Monolayer, bilayer and multilayer graphene were transferred to PU. • Samples were characterized by Raman and optical spectroscopies. • PU/monolayer graphene has transmittance around 80% in visible range. - Abstract: We have proposed the direct transfer of large-area graphene films grown by chemical vapor deposition to polymeric substrate by evaporating of solvents of polyurethane/tetrahydrofurane solution. The graphene films on polyurethane substrates were characterized by Raman spectroscopy, optical and atomic force microscopies and UV–vis spectroscopy measurements. The Raman spectra revealed that it is possible to transfer in a controlled manner monolayer, bilayer and multilayer graphene films over polyurethane substrate.

  3. Direct transfer of graphene films for polyurethane substrate

    Energy Technology Data Exchange (ETDEWEB)

    Vilani, C.; Romani, E.C.; Larrudé, D.G. [Departamento de Física, Pontifícia Universidade Católica do Rio de Janeiro, 22451-900 Rio de Janeiro, RJ (Brazil); Barbosa, Gelza M. [Diretoria de Sistemas de Armas da Marinha, Marinha do Brasil, 20010-00 Rio de Janeiro, RJ (Brazil); Freire, F.L., E-mail: lazaro@vdg.fis.puc-rio.br [Departamento de Física, Pontifícia Universidade Católica do Rio de Janeiro, 22451-900 Rio de Janeiro, RJ (Brazil); Centro Brasileiro de Pesquisas Físicas, 22290-180 Rio de Janeiro, RJ (Brazil)

    2015-11-30

    Highlights: • Graphene was prepared by CVD using copper foils as substrates. • Monolayer, bilayer and multilayer graphene were transferred to PU. • Samples were characterized by Raman and optical spectroscopies. • PU/monolayer graphene has transmittance around 80% in visible range. - Abstract: We have proposed the direct transfer of large-area graphene films grown by chemical vapor deposition to polymeric substrate by evaporating of solvents of polyurethane/tetrahydrofurane solution. The graphene films on polyurethane substrates were characterized by Raman spectroscopy, optical and atomic force microscopies and UV–vis spectroscopy measurements. The Raman spectra revealed that it is possible to transfer in a controlled manner monolayer, bilayer and multilayer graphene films over polyurethane substrate.

  4. Alginate based polyurethanes: A review of recent advances and perspective.

    Science.gov (United States)

    Zia, Khalid Mahmood; Zia, Fatima; Zuber, Mohammad; Rehman, Saima; Ahmad, Mirza Nadeem

    2015-08-01

    The trend of using biopolymers in combination with synthetic polymers was increasing rapidly from last two or three decades. Polysaccharide based biopolymers especially starch, cellulose, chitin, chitosan, alginate, etc. found extensive applications for different industrial uses, as they are biocompatible, biodegradable, bio-renewable resources and chiefly environment friendly. Segment block copolymer character of polyurethanes that endows them a broad range of versatility in terms of tailoring their properties was employed in conjunction with various natural polymers resulted in modified biomaterials. Alginate is biodegradable, biocompatible, bioactive, less toxic and low cost anionic polysaccharide, as a part of structural component of bacteria and brown algae (sea weed) is quite abundant in nature. It is used in combination with polyurethanes to form elastomers, nano-composites, hydrogels, etc. that especially revolutionized the food and biomedical industries. The review summarized the development in alginate based polyurethanes with their potential applications. Copyright © 2015 Elsevier B.V. All rights reserved.

  5. Thermal Properties of Anionic Polyurethane Composition for Leather Finishing

    Directory of Open Access Journals (Sweden)

    Olga KOVTUNENKO

    2016-09-01

    Full Text Available Thermal properties of anionic polyurethane composition mixed with collagen product and hydrophilic sodium form of montmorillonite for use in the finishing of leather were studied by thermogravimetric method. The thermal indices of processes of thermal and thermo-oxidative destruction depending on the polyurethane composition were determined. The influence of anionic polyurethane composition on thermal behavior of chromium tanned gelatin films that imitate the leather were studied. APU composition with natural compounds increases their thermal stability both in air and in nitrogen atmosphere due to the formation of additional bonds between active groups of APU, protein and chrome tanning agent as the result of chemical reactions between organic and inorganic parts with the new structure formation.DOI: http://dx.doi.org/10.5755/j01.ms.22.3.10043

  6. Synthesis and characterization of isophorone diisocyanate based polyurethanes

    Science.gov (United States)

    Mirčeva, A.; Malavašič, T.; Osredkar, U.

    1990-03-01

    Polyurethane ionomers based on polycaprolactone glycol or polyoxytetramethylene glycol with isophorone diisocyanate and chain extenders 1,4-butanediol, 2,2'(dihydroxymethyl) propionic acid and in some cases water, were synthesized in solution. Stable aqueous dispersions from the ionomers were obtained when the concentration of ionic groups was at least 30 mmol per 100 g of polyurethane. Higher concentration of hard segments in the structure produced elastic and transparent films. Hard-soft segment interactions in a series of model compounds were estimated by Fourier transform infrared spectroscopy. Thermal properties of the films were determined by differential scanning calorimetry and by FTIR as well.

  7. Fabrication and characterization of cellulose nanocrystal based transparent electroactive polyurethane

    Science.gov (United States)

    Ko, Hyun-U.; Kim, Hyun Chan; Kim, Jung Woong; Zhai, Lindong; Jayaramudu, Tippabattini; Kim, Jaehwan

    2017-08-01

    This paper reports cellulose nanocrystal (CNC) based transparent and electroactive polyurethane (CPPU), suitable for actively tunable optical lens. CNC is used for high dielectric filler to improve electromechanical behavior of CPPU. For high transparency and homogeneous distribution of CNC in polyurethane, CNC-poly[di(ethylene glycol) adipate] is used to play a role of polyol and isocyanate salt. The fabricated CPPU exhibits high transparency (>90%) and 10% of electromechanical strain under 3 V μm-1 electric field. Mechanical, dielectric properties as well as physical and chemical characteristics are investigated to prove the electromechanical behavior of CPPU.

  8. Design and development of low cost polyurethane biopolymer based on castor oil and glycerol for biomedical applications.

    Science.gov (United States)

    Tan, A C W; Polo-Cambronell, B J; Provaggi, E; Ardila-Suárez, C; Ramirez-Caballero, G E; Baldovino-Medrano, V G; Kalaskar, D M

    2018-02-01

    In the current study, we present the synthesis of novel low cost bio-polyurethane compositions with variable mechanical properties based on castor oil and glycerol for biomedical applications. A detailed investigation of the physicochemical properties of the polymer was carried out by using mechanical testing, ATR-FTIR, and X-ray photoelectron spectroscopy (XPS). Polymers were also tested in short term in-vitro cell culture with human mesenchymal stem cells to evaluate their biocompatibility for potential applications as biomaterial. FTIR analysis confirmed the synthesis of castor oil and glycerol based PU polymers. FTIR also showed that the addition of glycerol as co-polyol increases crosslinking within the polymer backbone hence enhancing the bulk mechanical properties of the polymer. XPS data showed that glycerol incorporation leads to an enrichment of oxidized organic species on the surface of the polymers. Preliminary investigation into in vitro biocompatibility showed that serum protein adsorption can be controlled by varying the glycerol content with polymer backbone. An alamar blue assay looking at the metabolic activity of the cells indicated that castor oil based PU and its variants containing glycerol are non-toxic to the cells. This study opens an avenue for using low cost bio-polyurethane based on castor oil and glycerol for biomedical applications. © 2017 The Authors Biopolymers Published by Wiley Periodicals, Inc.

  9. [Blue light and eye health].

    Science.gov (United States)

    Zou, Leilei; Dai, Jinhui

    2015-01-01

    Blue light, with the wavelength between 400 nm and 500 nm, has caused public concern because of the injury to the retinal cells. Meanwhile, it is important in circadian rhythm regulation, scotopic vision and ocular growth. Is the blue light safe? Should it be eliminated from the daily life? Here we review the effect and safety of the blue light.

  10. Auxetic Polyurethane Foam (Fabrication, Properties and Applications)

    International Nuclear Information System (INIS)

    Yousif, H.I.Y.

    2012-01-01

    Modern technology requires new materials of special properties. For the last two decades there has been a great interest in a class of materials known as auxetic materials. An auxetic material is a material that has a negative Poisson's ratio which means that this material expands laterally when they subjected to a tensile force unlike most of the other traditional materials. This material has superior properties over the traditional material such as high shear modulus and high impact resistance, which makes this material a good candidate for many engineering applications. In the present research work, auxetic flexible polyurethane polymeric foams having different densities were fabricated from conventional flexible polyurethane polymeric foam at different compression ratios. The microstructure of conventional and processed foams was examined by optical microscope to compare between the two structures. The microstructure of processed foam was compared with the one presented in the literature and it has shown the auxetic structure configuration. This is the first time to produce auxetic foam in Egypt. Conventional and auxetic foam samples having cylindrical and square cross-sections were produced from foams having different densities (25 kg/m 3 and 30 kg/m 3 ). The compression ratios used to produce the auxetic samples are (5.56, 6.94 and 9.26). Four mechanical tests were carried out to get the mechanical properties for both conventional and auxetic foams. Two quasi-static mechanical tests t ension and compression a nd two dynamic mechanical tests H ysteresis and resilience w ere carried out to compare between the conventional and auxetic foams. The quasi-static tensile test was carried out at speed was adjusted to be position control rate of 0.2 mm/s. The compression and hysteresis tests were carried out at strain control rate of 0.3 S -1 . The data recorded from the machine were stress and strain. The modulus of elasticity and Poisson's ratio of the test

  11. The Use of Membranes Prepared by Radiation - Induced Grafting in Waste Water Treatment

    International Nuclear Information System (INIS)

    El-Arnaouty, M.B.; Abdel Aal, S.E.; Dessouki, A.M.

    2000-01-01

    Membranes were prepared by the radiation-induced grafting of N-vinylpyrrolidone onto low density polyethylene and the possibility for their practical use in the removal of two dyes: Acid red 116(Erionyl red 2B) and blue reactive (Brilliant bright blue) was studied. The effect of the degree of grafting on the adsorption of these pollutants was investigated and showed maximum adsorption occurred at 394 % grafting. Radiation degradation of the dyes with a dose of ∼ 5 KGy was followed by adsorption of the residual concentration of the dyes by the membranes, which resulted in the complete removal of these pollutants as well as the radiolysis products present in the irradiated solutions. Also, characterization of the membranes before and after adsorption was carried out using thermogravimetric analysis and scanning electron microscopy

  12. Periorbital fat grafting.

    Science.gov (United States)

    Massry, Guy G; Azizzadeh, Babak

    2013-02-01

    Periorbital aging is a multifactorial process involving volume loss (bone and soft tissue), tissue decent, and cutaneous degenerative changes. Traditional approaches to surgery on this area of the face have been subtractive in nature, focusing on excision of skin, muscle, and fat. This has frequently led to a gaunt or hollowed postoperative appearance. Contemporary aesthetic eyelid and periorbital rejuvenation has undergone a paradigm shift from an excisionally based surgical approach to one that prioritizes volume preservation and/or augmentation. The development of fat grafting to the eyelids and periorbita has given the eyelid surgeon a viable surgical alternative to prevent postoperative volume depletion, maintain the smooth transition of the lower eyelid to the cheek, and aid in restoring the youthful appearance desired after surgery. This article will focus of periorbital fat grafting and touch upon fat preservation techniques as primary restorative procedures or as surgical adjuncts. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

  13. Vein grafting in fingertip replantations.

    Science.gov (United States)

    Yan, Hede; Jackson, William D; Songcharoen, Somjade; Akdemir, Ovunc; Li, Zhijie; Chen, Xinglong; Jiang, Liangfu; Gao, Weiyang

    2009-01-01

    In this retrospective study, the survival rates of fingertip replantation with and without vein grafting were evaluated along with their postoperative functional and cosmetic results. One hundred twenty-one-fingertip amputations were performed in 103 patients between September 2002 and July 2007. Thirty-four amputated fingertips were replanted without vein grafting, while 87 amputated fingertips were replanted with vein grafting for arterial and/or venous repairs. The overall survival rates of the replantations with and without vein grafting were 90% (78/87) and 85% (29/34), respectively. The survival rates were 88% (36/41) with venous repair, 93% (25/27) with arterial repair, and 89% (17/19) with both. Nineteen patients without vein grafting and 48 patients with vein grafting had a follow-up period of more than one year. Good cosmetic and functional outcomes were observed in both groups of patients. The results show that vein grafting is a reliable technique in fingertip replantations, showing no significant difference (P > 0.05) in survival between those with and without vein grafting. Furthermore, no significant difference (P > 0.05) in survival was found between cases with vein grafts for arterial and/or venous repairs. In fingertip replantations with vein grafting, favorable functional and esthetic results can be achieved without sacrificing replantation survival. (c) 2009 Wiley-Liss, Inc.

  14. Synthesis, characterization of calcium phosphates/polyurethane composites for weight-bearing implants.

    Science.gov (United States)

    Yoshii, Toshitaka; Dumas, Jerald E; Okawa, Atsushi; Spengler, Dan M; Guelcher, Scott A

    2012-01-01

    Calcium phosphate (CaP)/polymer composites have been studied as an alternative graft material for the treatment of bone defects. In this study, lysine-triisocyanate-based polyurethane (PUR) composites were synthesized from both hydroxyapatite (HA) and β-tricalcium phosphate (TCP) to reduce the brittleness of CaP and increase the bioactivity of the polymer. The mechanical properties and in vitro cellular response were investigated for both HA/PUR and TCP/PUR composites. The composites were implanted in femoral defects in rats, and in vivo bioactivity was evaluated by X-rays, micro-computed tomography (μCT), and histological sections. In biomechanical testing, PUR improved the mechanical properties of the CaP, thus rendering it potentially suitable for weight-bearing applications. In vitro cell culture studies showed that CaP/PUR composites are biocompatible, with β-TCP enhancing the cell viability and proliferation relative to HA. CaP/PUR composites also supported the differentiation of osteoblastic cells on the materials. When implanted in rat femoral defects, the CaP/PUR composites were biocompatible and osteoconductive with no adverse inflammatory response, as evidenced by X-rays, μCT images, and histological sections. Additionally, a histological examination showed evidence of cellular infiltration and appositional remodeling. These results suggest that CaP/PUR composites could be potentially useful biomaterials for weight-bearing orthopaedic implants. Copyright © 2011 Wiley Periodicals, Inc.

  15. Preparation and characterization of a novel magnetorheological elastomer based on polyurethane/epoxy resin IPNs matrix

    Science.gov (United States)

    Yu, M.; Qi, S.; Fu, J.; Yang, P. A.; Zhu, M.

    2015-04-01

    This paper proposes the preparation of a novel magnetorheological elastomer (MRE) with improved damping and mechanical properties. This MRE is based on polyurethane (PU)/epoxy resin (EP) graft interpenetrating polymer networks (IPNs). The tensile strengths, thermal stability, magnetorhelogical behavior, and damping properties of the MRE are studied systematically in terms of composition. The Fourier transform infrared (FTIR) spectra verifies the formation of IPN structures, and thermogravimetric analysis (TGA) revealed that the thermal decomposition temperature was raised by the addition of IPN structures. The test results from the materials test machine and the rheometer show that the presence of IPN can significantly improve the tensile strength and damping properties of the MRE. In addition, the mechanism for enhancing tensile strength and damping properties is proposed. The experiment results suggest that the damping performance of the MRE has a significant correlation with the magnetic strength, content of EP, and temperature. As the thermal endurance properties, tensile strength, and loss factor are improved by incorporating EP/PU IPN structure, it is expected that the PU/EP IPN MRE can be used as an intelligent structural damping material.

  16. Chromatographic matrix based on hydrogel-coated reticulated polyurethane foams, prepared by gamma irradiation

    Science.gov (United States)

    Sánchez, Mirna L.; Giménez, Claudia Y.; Delgado, Juan F.; Martínez, Leandro J.; Grasselli, Mariano

    2017-12-01

    Novel chromatographic materials for protein purification with high adsorption capacity and fouling resistance are highly demanded to improve downstream processes. Here, we describe a novel adsorptive material based on reticulated polyurethane foam (rPUF) coated with a functional hydrogel layer. rPUF provides physical rigidity through its macroscopic structure, whereas the hydrogel layer provides capacity to adsorb proteins by specific interactions. The hydrogel coating process was performed by the dip-coating method, using a polyvinyl alcohol (PVA) solution. The PVA hydrogel was linked to the rPUF material by using a radiation-induced crosslinking process in aqueous ethanol solution. The ethanol in the solvent mixture allowed a balance between PVA swelling and PVA dissolution during the irradiation step. The resulting material showed higher thermal stability than the non-irradiated one. In addition, a simultaneous radiation-induced grafting polymerization (SRIGP) was done by simple addition of glycidyl methacrylate monomer into the irradiation solution. In a further step, sulfonic ligands were included specifically in the hydrogel layer, which contained around 200% of PVA respect to the original rPUF. Materials were characterized by FT-IR, thermogravimetric analysis, SEM microscopy and EDX analysis. The cation-exchange rPUF material was functionally characterized by the Langmuir isotherm and a dynamic adsorption experiment to analyze the chromatographic properties for protein purification processes.

  17. Polyurethane acrylate networks including cellulose nanocrystals: a comparison between UV and EB- curing

    Science.gov (United States)

    Furtak-Wrona, K.; Kozik-Ostrówka, P.; Jadwiszczak, K.; Maigret, J. E.; Aguié-Béghin, V.; Coqueret, X.

    2018-01-01

    A water-based polyurethane (PUR) acrylate water emulsion was selected as a radiation curable matrix for preparing nanocomposites including cellulose nanocrystals (CNC) prepared by controlled hydrolysis of Ramie fibers. Cross-linking polymerization of samples prepared in the form of films or of 1 mm-thick bars was either initiated by exposure to the 395 nm light of a high intensity LED lamp or by treatment with low energy electron beam (EB). The conversion level of acrylate functions in samples submitted to increasing radiation doses was monitored by Fourier Transform Infrared Spectroscopy (FTIR). Differential Scanning Calorimetry (DSC) and Dynamic Mechanical Analysis (DMA) were used to characterize changes in the glass transition temperature of the PUR-CNC nanocomposites as a function of acrylate conversion and of CNC content. Micromechanical testing indicates the positive effect of 1 wt% CNC on Young's modulus and on the tensile strength at break (σ) of cured nanocomposites. The presence of CNC in the PUR acrylate matrix was shown to double the σ value of the nanocomposite cured to an acrylate conversion level of 85% by treatment with a 25 kGy dose under EB, whereas no increase of σ was observed in UV-cured samples exhibiting the same acrylate conversion level. The occurrence of grafting reactions inducing covalent linkages between the polysaccharide nanofiller and the PUR acrylate matrix during the EB treatment is advanced as an explanation to account for the improvement observed in samples cured under ionizing radiation.

  18. In vitro biocompatibility evaluation of silk-fibroin/polyurethane membrane with cultivation of HUVECs

    Science.gov (United States)

    Zhou, Mei; Wang, Wei-Ci; Liao, Yong-Gui; Liu, Wen-Qi; Yu, Miao; Ouyang, Chen-Xi

    2014-03-01

    In order to investigate the in vitro biocompatibility of a novel polyurethane (PU) membrane modified by incorporation of superfine silk-fibroin powder (SFP), which was prepared for small-diameter vascular grafts, with the cultivation of human umbilical vein endothelial cells (HUVECs), PU and SFP were mixed with the ratios of 9:1, 7:3, 5:5, 3:7 (PU:SFP) to make four composite materials. Unmodified PU and polytetrafluoroethylene (PTFE) were added as control groups. CCK-8 assay was used to evaluate the cytotoxicity of these biomaterials. Data were processed using SPSS, and P cytotoxicity property, and more content of SFP in the composite showed no improvement of the biocompatibility. HUVECs strongly attached to and grew on the surface of the biomaterials, and proliferated rapidly. The proliferation ability increased with increased proportion of SFP; however the cell quantity on the surface of the materials decreased when the proportion of SFP was equal to or larger than that of PU in the composite. It is concluded that this novel material has excellent cellular affinity with no cytotoxicity to HUVECs. Adding SFP gives PU better biocompatibility, while further research on optimum blend ratios is still needed.

  19. Novel polycarbonate-based polyurethane elastomers: composition–property relationship

    Czech Academy of Sciences Publication Activity Database

    Špírková, Milena; Pavličevic, J.; Strachota, Adam; Poreba, Rafal; Bera, O.; Kaprálková, Ludmila; Baldrian, Josef; Šlouf, Miroslav; Lazić, N.; Budinski-Simendic, J.

    2011-01-01

    Roč. 47, č. 5 (2011), s. 959-972 ISSN 0014-3057 R&D Projects: GA ČR GAP108/10/0195 Institutional research plan: CEZ:AV0Z40500505 Keywords : polyurethane elastomer * polycarbonate diol * montmorillonite Subject RIV: CD - Macromolecular Chemistry Impact factor: 2.739, year: 2011

  20. Polyurethanes elastomers with amide chain extenders of uniform length

    NARCIS (Netherlands)

    van der Schuur, J.M.; Noordover, B.A.J.; Noordover, Bart; Gaymans, R.J.

    2006-01-01

    Toluene diisocyanate based polyurethanes with amide extenders were synthesized poly(propylene oxide) with a number average molecular weight of 2000 and endcapped with toluene diisocyanate was used as the polyether segment. The chain extenders were based on poly(hexamethylene terephthalamide):

  1. 78 FR 55641 - Polyurethane-Type Polymers; Tolerance Exemption

    Science.gov (United States)

    2013-09-11

    ...-Type Polymers; Tolerance Exemption AGENCY: Environmental Protection Agency (EPA). ACTION: Final rule... polymers produced by the reaction of either 1,6-hexanediisocyanate; 2,4,4-trimethyl-1,6-hexanediisocyanate... (also known as polyurethane-type polymers), when used as an inert ingredient in a pesticide chemical...

  2. Synthesis and characterization of castor oil-based polyurethane for ...

    Indian Academy of Sciences (India)

    Polyurethane (PU) based on polyol, derived from castor oil has been synthesized and characterized for potential use as a base material for electrolytes. Transesterification process of castor oil formed a polyol with hydroxyl value of 190 mg KOH g–1 and molecular weight of 2786 g mol–1. The polyols together with 4 ...

  3. Synthesis and characterization of bio-based polyurethane from ...

    Indian Academy of Sciences (India)

    Benzoylated tannin prepared by benzoylation of cashewnut husk tannin, was treated with hexame-thylenediisocyanate in the presence of 1,4-butanediol as an extender to prepare thermosetting polyurethane. The sample was characterized using FT–IR and 13C NMR spectra. Thermal, morphological, physico-chemical and ...

  4. Optimization of polyurethane foam cube in enhancing the ...

    African Journals Online (AJOL)

    ... and 0.368 g respectively. For packing volume, 6% is the best since has highest attached microalgae biomass with yield 0.753 g, compared with 2%, 4%, 8% and 10% with yield 0.426 g, 0.577 g, 0.687 g and 0.644 g attached biomass respectively. Keywords: microalgae; chlorella vulgaris, polyurethane; attached biomass.

  5. Characterization studies of lower and non-TDI polyurethane encapsulants

    International Nuclear Information System (INIS)

    Wilson, M.H.

    1993-09-01

    Polyurethane prepolymers containing toluene diisocyanate (TDI) are used within the Nuclear Weapons complex for many adhesive and encapsulation applications. As part of a program for minimizing hazards to workers and the environment, TDI will be eliminated. This report presents evaluation of alternative encapsulants

  6. The use of polyurethane in coastal engineering models

    NARCIS (Netherlands)

    Verhagen, H.J.

    2014-01-01

    In physical model tests there is often a need of preventing stones from moving. This can be achieved by gluing the stones. Applying PBA (Polyurethane Bonded Agregate, e.g. Elastocoast) guarantees no moving stones, a normal permeability and a transportable model.

  7. Recycling Waste Polyurethane as a Carbon Resource in Ironmaking*

    African Journals Online (AJOL)

    Michael

    2017-06-01

    Jun 1, 2017 ... Globally, major avenues available for dealing with waste Poly-Urethane (PU) are disposal at landfill sites and incineration. However, PU contains high levels of carbon and hydrogen that can be recovered for use as reductant in metal extraction processes. In this work the use of post-consumer PU as ...

  8. Recycling Waste Polyurethane as a Carbon Resource in Ironmaking ...

    African Journals Online (AJOL)

    Globally, major avenues available for dealing with waste Poly-Urethane (PU) are disposal at landfill sites and incineration. However, PU contains high levels of carbon and hydrogen that can be recovered for use as reductant in metal extraction processes. In this work the use of post-consumer PU as reductant for the ...

  9. Mechanical and microwave absorbing properties of carbon-filled polyurethane

    Czech Academy of Sciences Publication Activity Database

    Kučerová, Z.; Zajíčková, L.; Buršíková, V.; Kudrle, V.; Eliáš, M.; Jašek, O.; Synek, P.; Matějková, Jiřina; Buršík, Jiří

    2009-01-01

    Roč. 40, č. 1 (2009), s. 70-73 ISSN 0968-4328 R&D Projects: GA ČR(CZ) GA202/05/0607 Institutional research plan: CEZ:AV0Z20650511; CEZ:AV0Z20410507 Keywords : carbon nanotubes * composite * polyurethane * mechanical properties Subject RIV: JI - Composite Materials Impact factor: 1.626, year: 2009

  10. Biodegradable injectable polyurethanes: synthesis and evaluation for orthopaedic applications.

    Science.gov (United States)

    Adhikari, Raju; Gunatillake, Pathiraja A; Griffiths, Ian; Tatai, Lisa; Wickramaratna, Malsha; Houshyar, Shadi; Moore, Tim; Mayadunne, Roshan T M; Field, John; McGee, Margaret; Carbone, Tania

    2008-10-01

    Biodegradable polyurethanes offer advantages in the design of injectable or preformed scaffolds for tissue engineering and other medical implant applications. We have developed two-part injectable prepolymer systems (prepolymer A and B) consisting of lactic acid and glycolic acid based polyester star polyols, pentaerythritol (PE) and ethyl lysine diisocyanate (ELDI). This study reports on the formulation and properties of a series of cross linked polyurethanes specifically developed for orthopaedic applications. Prepolymer A was based on PE and ELDI. Polyester polyols (prepolymer B) were based on PE and dl-lactic acid (PEDLLA) or PE and glycolic acid (PEGA) with molecular weights 456 and 453, respectively. Several cross linked porous and non-porous polyurethanes were prepared by mixing and curing prepolymers A and B and their mechanical and thermal properties, in vitro (PBS/37 degrees C/pH 7.4) and in vivo (sheep bi-lateral) degradation evaluated. The effect of incorporating beta-tricalcium phosphate (beta-TCP, 5 microns, 10 wt.%) was also investigated. The cured polymers exhibited high compressive strength (100-190 MPa) and modulus (1600-2300 MPa). beta-TCP improved mechanical properties in PEDLLA based polyurethanes and retarded the onset of in vitro and in vivo degradation. Sheep study results demonstrated that the polymers in both injectable and precured forms did not cause any surgical difficulties or any adverse tissue response. Evidence of new bone growth and the gradual degradation of the polymers were observed with increased implant time up to 6 months.

  11. Hyaluronan Immobilized Polyurethane as a Blood Contacting Material

    Directory of Open Access Journals (Sweden)

    Feirong Gong

    2010-01-01

    Full Text Available Hyaluronan (hyaluronic acid, HA was immobilized onto the surface of amino-functionalized polyurethane films with the goal of obtaining a novel kind of biomaterial which had the potential in blood-contacting applications. The amino-functionalized polyurethane was prepared by synthesized acidic polyurethane whose pendant carboxyl groups were treated with an excess amount of 1,3-diaminopropane in the presence of N,N-carbonyldiimidazole (CDI. Attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR, Raman spectroscopy (RS, scanning electron microscopy (SEM, and water contact angle measurement were used to confirm the surface changes at each step of treatment, both in morphologies and chemical compositions. APTT and PT results showed that HA immobilization could prolong the blood coagulation time, thus HA-immobilized polyurethane (PU-HA exhibited improved blood compatibility. Cytotoxicity analysis showed that the PU-HA films synthesized in this study were cytocompatible and could support human vein endothelial cells (HUVECs adhesion and proliferation.

  12. Characterization of Novel Castor Oil-Based Polyurethane Polymer Electrolytes

    Directory of Open Access Journals (Sweden)

    Salmiah Ibrahim

    2015-04-01

    Full Text Available Castor oil-based polyurethane as a renewable resource polymer has been synthesized for application as a host in polymer electrolyte for electrochemical devices. The polyurethane was added with LiI and NaI in different wt% to form a film of polymer electrolytes. The films were characterized by using attenuated total reflectance-Fourier transform infrared spectroscopy, dynamic mechanical analysis, electrochemical impedance spectroscopy, linear sweep voltammetry and transference number measurement. The highest conductivity of 1.42 × 10−6 S cm−1 was achieved with the addition of 30 wt% LiI and 4.28 × 10−7 S·cm−1 upon addition of 30 wt% NaI at room temperature. The temperature dependence conductivity plot indicated that both systems obeyed Arrhenius law. The activation energy for the PU-LiI and PU-NaI systems were 0.13 and 0.22 eV. Glass transition temperature of the synthesized polyurethane decreased from −15.8 °C to ~ −26 to −28 °C upon salts addition. These characterizations exhibited the castor oil-based polyurethane polymer electrolytes have potential to be used as alternative membrane for electrochemical devices.

  13. Polyurethanes with bio-based and recycled components

    Czech Academy of Sciences Publication Activity Database

    Beneš, Hynek; Vlček, T.; Černá, R.; Hromádková, Jiřina; Walterová, Zuzana; Svitáková, Romana

    2012-01-01

    Roč. 114, č. 1 (2012), s. 71-83 ISSN 1438-7697 R&D Projects: GA MPO 2A-2TP1/135 Institutional research plan: CEZ:AV0Z40500505 Keywords : natural oil * polyol * polyurethane Subject RIV: CD - Macromolecular Chemistry Impact factor: 2.266, year: 2012

  14. Utilization of natural oils for decomposition of polyurethanes

    Czech Academy of Sciences Publication Activity Database

    Beneš, Hynek; Černá, R.; Ďuračková, Andrea; Látalová, Petra

    2012-01-01

    Roč. 20, č. 1 (2012), s. 175-185 ISSN 1566-2543 R&D Projects: GA MPO 2A-2TP1/135 Institutional research plan: CEZ:AV0Z40500505 Keywords : polyurethane * oleochemical polyol * chemical recycling Subject RIV: CD - Macromolecular Chemistry Impact factor: 1.495, year: 2012

  15. Synthesis and characterization of castor oil-based polyurethane

    Indian Academy of Sciences (India)

    Polyurethane (PU) based on polyol, derived from castor oil has been synthesized and characterized for potential use as a base material for electrolytes. Transesterification process of castor oil formed a polyol with hydroxyl value of 190 mg KOH g–1 and molecular weight of 2786 g mol–1. The polyols together with 4 ...

  16. Synthesis and characterization of castor oil based polyurethane ...

    Indian Academy of Sciences (India)

    Unknown

    Abstract. A series of interpenetrating polymer networks (IPNs) of castor oil based polyurethane/polyacrylo- nitrile (PU/PAN: 80/20, 60/40, 50/50, 40/60 and 20/80) were synthesized by condensation reaction of castor oil with methylene diisocyanate and acrylonitrile, employing benzoyl peroxide (BPO) and ethylene glycol ...

  17. Thermoplastic shape-memory polyurethanes based on natural oils

    Science.gov (United States)

    Saralegi, Ainara; Foster, E. Johan; Weder, Christoph; Eceiza, Arantxa; Corcuera, Maria Angeles

    2014-02-01

    A new family of segmented thermoplastic polyurethanes with thermally activated shape-memory properties was synthesized and characterized. Polyols derived from castor oil with different molecular weights but similar chemical structures and a corn-sugar-based chain extender (propanediol) were used as starting materials in order to maximize the content of carbon from renewable resources in the new materials. The composition was systematically varied to establish a structure-property map and identify compositions with desirable shape-memory properties. The thermal characterization of the new polyurethanes revealed a microphase separated structure, where both the soft (by convention the high molecular weight diol) and the hard phases were highly crystalline. Cyclic thermo-mechanical tensile tests showed that these polymers are excellent candidates for use as thermally activated shape-memory polymers, in which the crystalline soft segments promote high shape fixity values (close to 100%) and the hard segment crystallites ensure high shape recovery values (80-100%, depending on the hard segment content). The high proportion of components from renewable resources used in the polyurethane formulation leads to the synthesis of bio-based polyurethanes with shape-memory properties.

  18. Synthesis and characterization of castor oil-based polyurethane for ...

    Indian Academy of Sciences (India)

    Administrator

    Abstract. Polyurethane (PU) based on polyol, derived from castor oil has been synthesized and characterized for potential use as a base material for electrolytes. Transesterification process of castor oil formed a polyol with hydroxyl value of 190 mg KOH g–1 and molecular weight of 2786 g mol–1. The polyols together with.

  19. Interfacial contributions in lignocellulosic firber-reinforced polyurethane composites

    Science.gov (United States)

    Timothy G. Rials; Michael P. Wolcott; John M. Nassar

    2001-01-01

    Whereas lignocellulosic fibers have received considerable attention as a reinforcing agent in thermoplastic composites, their applicability to reactive polymer systems remains of considerable interest. The hydroxyl-rich nature of natural lignocellulosic fibers suggests that they are particularly useful in thermsetting systems such as polyurethanes. To further this...

  20. Interfacial contributions in lignocellulosic fiber-reinforced polyurethane composites

    Science.gov (United States)

    Timothy G. Rials; Michael P. Wolcott; John M. Nassar

    2001-01-01

    Whereas lignocellulosic fibers have received considerable attention as a rein- forcing agent in thermoplastic composites, their applicability to reactive polymer systems remains of considerable interest. The hydroxyl-rich nature of natural lignocellulosic fibers suggests that they are particularly useful in thermosetting systems such as polyurethanes. To further this...

  1. Influence of polyols on properties of bio-based polyurethanes

    Indian Academy of Sciences (India)

    The thermal degradation of all the three elastomers starts almost at 270◦C ... Experimental. 2.1 Materials and methods. Cardanol was procured from m/s Sathya Cashew Pvt. Ltd.,. Chennai. Formaldehyde (40% solution) for formylation and methanol for .... C to determine solubility parameter of polyurethane samples.

  2. Using skeletonised grafts for coronary artery bypass grafting.

    Science.gov (United States)

    Bawany, Faizan Imran; Khan, Muhammad Shahzeb; Khan, Asadullah; Kazi, Abdul Nafey; Naeem, Muhammed

    2014-05-01

    Coronary artery bypass graft surgery relieves angina symptoms and reduces mortality among ischaemic heart disease patients. It remains the gold standard for the treatment of multi-vessel and left main coronary artery disease. It is a well-known fact that internal mammary artery conduits have excellent and long-lasting patency when used for coronary artery bypass grafting. Its supremacy is largely because it prevents atherosclerosis. The old-style internal mammary artery bypass grafting, classically known as pedicle grafting, includes a circular rim of tissue around the graft. Bilateral pedicled internal mammary arteries, especially among diabetic patients, have been reported to cause complications in the sternum like sternal osteomyelitis. In many studies it has been reported that dissection of pedicled internal mammary artery can lead to sternal devascularisation which can lead to higher incidence of infections. Considering the higher incidence of deep sternal infections in patients with double pedicled arterial grafts, dissection of internal mammary artery in skeletonised manner was proposed. In this review, we outline the advantages of skeletonised grafting with respect to incidence of sternal infection, patency rates, blood flow, post-coronary artery bypass graft pain and the length of the graft.

  3. Studies on polyurethane adhesives and surface modification of hydrophobic substrates

    Science.gov (United States)

    Krishnamoorthy, Jayaraman

    This thesis work deals with (a) Curing of reactive, hot-melt polyurethane adhesives and (b) Adsorption studies using different interactions. Research on polyurethanes involves characterization of polyurethane prepolymers and a novel mechanism to cure isocyanate-terminated polyurethane prepolymer by a "trigger" mechanism. Curing of isocyanate-terminated polyurethane prepolymers has been shown to be influenced by morphology and environmental conditions such as temperature and relative humidity. Although the initial composition, final morphology and curing kinetics are known, information regarding the intermediate prepolymer mixture is yet to be established. Polyurethane prepolymers prepared by the reaction of diisocyanates with the primary hydroxyls of polyester diol (PHMA) and secondary hydroxyls of polyether diol (PPG) were characterized. The morphology and crystallization kinetics of a polyurethane prepolymer was compared with a blend of PPG prepolymer (the product obtained by the reaction of PPG with diisocyanate) and a PHMA prepolymer (the product obtained by the reaction of PHMA with diisocyanate) to study the effect of copolymer formed in the polyurethane prepolymer on the above-mentioned properties. Although the morphology of the polyurethane prepolymer is determined in the first few minutes of application, the chemical curing of isocyanate-terminated prepolymer occurs over hours to days. In the literature, different techniques are described to follow the curing kinetics. But there is no established technique to control the curing of polyurethane prepolymer. To make the curing process independent of environmental factors, a novel approach using a trigger mechanism was designed and implemented by using ammonium salts as curing agents. Ammonium salts that are stable at room temperature but decompose on heating to yield active hydrogen-containing compounds, NH3 and H2O, were used as 'Trojan horses' to cure the prepolymer chemically. Research on adsorption

  4. Thermoplastic polyurethane (TPU)/polyolefin (PO) blends

    Science.gov (United States)

    Lu, Qiwei

    Thermoplastic polyurethane (TPU) is a very important material with high versatility and superior physical properties. Melt blending TPU with metallocene polyolefin (PO) can lower TPU cost and improve polyolefin properties like abrasion resistance, adhesion, and paintability. Since TPU and non-polar PO blends are completely immiscible, efficient compatibilizers become the key issue and remain challenging. My main thesis work is to develop and study compatibilized TPU/PO blends. Although reactive compatibilization is considered the most efficient method, fast interfacial reactions between highly reactive functional groups are necessary to generate compatibilizers within usually short processing time. It is known that the urethane linkage (carbamate -NHCOO-) in TPU can reversibly dissociate to generate highly reactive isocyanates at melt temperatures. To find out the best reactive compatibilization, three approaches were employed on different molecular scales: (1) model urethane compound (dibutyl & dioctyl 4,4'-methylenebis(phenyl carbamate)) and small functional molecule (primary amine, secondary amine, hydroxyl, acid, anhydride, and epoxide) reactions at 200°C monitored by nuclear magnetic resonance and Fourier-transform infrared to examine the basic chemistry; (2) short, model TPU's with different chemical structures blended with functional polymers including poly(ethylene glycol) and polybutadiene to explore the effect of interface in immiscible mixtures; (3) melt blending of a commercial TPU with polypropylene (PP), further involving more complicated morphology, using different types of functional PP's (note: amine functional PP's were prepared by melt amination) as compatibilizers followed by rheological, morphological, thermal, and mechanical characterizations. Besides the core thesis project on TPU blends, other related work that has been accomplished includes: (1) adhesion between TPU and PP; (2) rheological properties of TPU; (3) block copolymer formation

  5. Auxetic polyurethane foam: Manufacturing and processing analysis

    Science.gov (United States)

    Jahan, Md Deloyer

    Materials with negative Poisson's ratio are referred to as auxetic materials. They are different from conventional materials in their deformation behavior when responding to external stresses. The cross-section of the materials widens in the lateral direction when being stretched in the longitudinal direction and becomes narrower when being compressed longitudinally. While a number of natural auxetic materials exist, most auxetic materials are synthetic. They show interesting properties and have potential in several important applications. Auxetic materials exhibit better mechanical properties than conventional materials such as enhanced indentation resistance, shear resistance, toughness, damping and energy absorption capacity, sound absorption, variable permeability and capability of producing complex curvature. These properties are beneficial in a wide range of applications including personal protective equipments, sound absorbers, packaging, smart filtration, drug delivery, tissue scaffolding, seat cushioning, etc. A wide range of auxetic materials has been synthesized. They include different polymers, metals, composites and ceramics. Among these, auxetic polyurethane (PU) foam is one of the most widely studied types of auxetic materials. Auxetic PU foams are usually fabricated by altering the microstructure of conventional foams and the unusual mechanical properties originate from the deformation characteristics of the microstructures. Three most important processing parameters in fabricating auxetic PU foam that dictate auxetic behavior are processing temperature, heating time and volumetric compression ratio. This study addresses several important issues in the manufacturing and characterization of auxetic PU foam. First, an improved automatic measuring technique has been developed to determine Poisson's ratio of auxetic PU foam. The technique involves development of a Matlab based image processing program. The second part of the study includes an

  6. Synthesis of polyurethane/clay nanocomposites based palm oil polyol coating

    Directory of Open Access Journals (Sweden)

    Teuku Rihayat

    2015-12-01

    Full Text Available In this study, we investigated the Polyurethane paint based on palm oil with the addition of nanoparticles montmorillonite as a heat-resistant. The composites with 1 wt%, 3 wt% and 5 wt% of bentonite filler content obtained by synthesizing in situ were investigated and compared to the neat polyurethane matrix material. The processing of bentonite for montmorillonite was done through several stages including: sedimentation, ultrasonication, dried, sieved with a 200 mesh sieve, then characterized. Untreated MMT were isolated and modified with CTAB. The addition of MMT into polyurethane, as much as 5% wt, can increase the heat as evidenced by the TGA test. The TGA results indicated an enhanced thermal stability, as compared to the neat polyurethane. The onset degradation of neat polyurethane and weight reduction began at a temperature of 50-150°C and completely decomposed at the temperatures of 380°C and for PU MKS-MMT reduction, the initial weight started at a temperature of 150-200°C in 5 %wt and decomposed in the end at a temperature of 490°C. In this research, we also tested the gloss adhesive polyurethane with the addition of MMT; the result stated that the addition of 5%wt MMT can improve the adhesion of polyurethane. The addition of MMT in polyurethane can also enhance the gloss polyurethane compared with polyurethane coated without the addition of MMT.

  7. Novel route of synthesis for cellulose fiber-based hybrid polyurethane

    Science.gov (United States)

    Ikhwan, F. H.; Ilmiati, S.; Kurnia Adi, H.; Arumsari, R.; Chalid, M.

    2017-07-01

    Polyurethanes, obtained by the reaction of a diisocyanate compound with bifunctional or multifunctional reagent such as diols or polyols, have been studied intensively and well developed. The wide range modifier such as chemical structures and molecular weight to build polyurethanes led to designs of materials that may easily meet the functional product demand and to the extraordinary spreading of these materials in market. Properties of the obtained polymer are related to the chemical structure of polyurethane backbone. A number polyurethanes prepared from biomass-based monomers have been reported. Cellulose fiber, as a biomass material is containing abundant hydroxyl, promising material as chain extender for building hybrid polyurethanes. In previous researches, cellulose fiber was used as filler in synthesis of polyurethane composites. This paper reported a novel route of hybrid polyurethane synthesis, which a cellulose fiber was used as chain extender. The experiment performed by reacting 4,4’-Methylenebis (cyclohexyl isocyanate) (HMDI) and polyethylene glycol with variation of molecular weight to obtained pre-polyurethane, continued by adding micro fiber cellulose (MFC) with variation of type and composition in the mixture. The experiment was evaluated by NMR, FTIR, SEM and STA measurement. NMR and FTIR confirmed the reaction of the hybrid polyurethane. STA showed hybrid polyurethane has good thermal stability. SEM showed good distribution and dispersion of sorghum-based MFC.

  8. Micrografts: the "super" expansion graft.

    Science.gov (United States)

    Mardovin, W; Miller, S F; Eppinger, M; Finley, R K

    1992-01-01

    A novel technique for producing micronized skin grafts that was introduced in a paper presented at the 1990 ABA meeting was evaluated to quantify maximum expansion. Twenty Sprague-Dawley rats were divided into two groups representing 10:1 and 25:1 expanded micrograft ratios, respectively. Grafted sites in both groups were shown to heal better than those of the control group, and both grafted groups showed comparable healing at day 10.

  9. The Modification of Polyurethane Foams Using New Boroorganic Polyols (II) Polyurethane Foams from Boron-Modified Hydroxypropyl Urea Derivatives

    Science.gov (United States)

    2014-01-01

    The work focuses on research related to determination of application possibility of new, ecofriendly boroorganic polyols in rigid polyurethane foams production. Polyols were obtained from hydroxypropyl urea derivatives esterified with boric acid and propylene carbonate. The influence of esterification type on properties of polyols and next on polyurethane foams properties was determined. Nitrogen and boron impacts on the foams' properties were discussed, for instance, on their physical, mechanical, and electric properties. Boron presence causes improvement of dimensional stability and thermal stability of polyurethane foams. They can be applied even at temperature 150°C. Unfortunately, introducing boron in polyurethanes foams affects deterioration of their water absorption, which increases as compared to the foams that do not contain boron. However, presence of both boron and nitrogen determines the decrease of the foams combustibility. Main impact on the decrease combustibility of the obtained foams has nitrogen presence, but in case of proper boron and nitrogen ratio their synergic activity on the combustibility decrease can be easily seen. PMID:24587721

  10. Environmental application of radiation grafting

    International Nuclear Information System (INIS)

    Tamada, Masao

    2007-01-01

    Adsorbent having high selectivity against a certain metal ion was synthesized by means of radiation-induced graft polymerization for the purpose of environmental application. The resulting adsorbents were utilized for the removal of toxic metal from scallop waste and the collection of uranium from seawater. As a novel application of grafting, the biodegradability of poly-hydroxybutylate was controlled by grafting. The biodegradability could be depressed by the graft chain and then recovered by external stimuli such as thermal and chemical treatments. (author)

  11. Optimization of tribological and mechanical properties of nanocomposites of polyurethane/poly(vinyl acetate)/CaCO3.

    Science.gov (United States)

    Brostow, Witold; Kumar, Puneet; Vrsaljko, Domagoj; Whitworth, Jenna

    2011-05-01

    Properties of samples containing polyurethane (PU), poly(vinyl acetate) (PVAc) and nanosize particles of calcium carbonate (CaCO3) are correlated with concentrations of these components. Interphase phenomena in PU/PVAc/CaCO3 nanohybrids have been studied before, we focus here on wear and scratch resistance. In addition to polymer blends containing CaCO3, the effects of adding CaCO3 with grafted PVAc, and CaCO3 with grafted silane and PVAc in varying ratios are also evaluated. For blends that do not contain the filler, a hypothesis explaining the concentration dependence of friction called the Bump Model is advanced and supported by the experimental results. In particular, we explain how creating a blend containing only 10% of a second polymer results in a dramatic drop of friction of the majority polymer. In single scratch testing, above 3% the filler displays 'its own' resistance to scratching. Chemical modification of the filler results in shallower residual depths--a consequence of improved interaction of the filler with the polymeric matrix. In sliding wear determination, strain hardening is seen for blends as well as for filler-containing composites. In tensile testing, addition of an unmodified filler increases the elongation at break and thus lowers the brittleness; the effect is even larger for chemically modified fillers.

  12. Manufacture and property research of heparin grafted electrospinning PCU artificial vascular scaffolds.

    Science.gov (United States)

    Li, Qing; Mu, Lanlan; Zhang, Fenghua; Mo, Zhichao; Jin, Chuanyu; Qi, Weiguo

    2017-09-01

    PCU (polycarbonate polyurethane) is supposed to be an ideal elastomer for manufacturing artificial vessel scaffold with perfect mechanical strength and biocompatibility. Surface grafting by heparin sodium can increase its anticoagulant hemorrhagic, achieving a better application in artificial vessels. Artificial vessels were preliminarily prepared by electrostatic spinning, treated by NH 3 plasma and cross-linked with the anticoagulant heparin sodium chemically. Performances of the PCU-Hep (heparin sodium grafted purethane artificial vessels) artificial vessel were calculated through the physical and chemical property tests, evaluation of blood and biocompatibility. Results manifested that heparin sodium was successfully grafted to the vascular surface, porosity, pore diameter and water permeability of the vascular prosthesis fitted the requirements of artificial vessels, the blood test results demonstrated that the vascular material had a low hemolysis, in vitro cytotoxicity experiment and animal experiments proved an excellent biocompatibility. Thus the heparin sodium grafted electrospinning vessels could reduce intravascular thrombus and had potential clinical application. Copyright © 2017 Elsevier B.V. All rights reserved.

  13. Solvent-free fabrication of micro-porous polyurethane amide and polyurethane-urea scaffolds for repair and replacement of the knee-joint meniscus

    NARCIS (Netherlands)

    Spaans, C.J; Belgraver, V.W.; Rienstra, O.; de Groot, J.H; Veth, R.P.H.; Penning, J.P

    2000-01-01

    New porous polyurethane urea and polyurethane amide scaffolds for meniscal reconstruction have been developed in a solvent-free process. As soft segments, copolymers of 50/50 L-lactide/epsilon-caprolactone have been used. After terminating the soft segment with diisocyanates, chain extension was

  14. Chemico-physical modifications induced by plasma and ozone sterilizations on shape memory polyurethane foams.

    Science.gov (United States)

    De Nardo, Luigi; Moscatelli, Monica; Silvi, Federica; Tanzi, Maria Cristina; Yahia, L'hocine; Farè, Silvia

    2010-07-01

    Thermally activated shape memory polyurethane foams are promising materials for minimally invasive surgical procedures. Understanding their physical and chemical properties, in vitro response and effects of sterilization is mandatory when evaluating their potential as biomaterials. In this work, we report on the characterization of two Cold Hibernated Elastic Memory (CHEM) foams before and after two novel low-temperature sterilization techniques (plasma and ozone). Foams have different transition temperatures (T(trans)), as determined by Tandelta peaks in DMA tests, that depend on their chemical composition: both foams possess excellent shape recovery ability (Recovery Rate up to 99%) in conventional shape recovery tests. Plasma sterilization (Sterrad sterilization system) resulted in a slight increase of open porosity, but no effects on bulk chemical and thermo-mechanical properties were observed. Ozone sterilization had a stronger effect on foams morphology, both in terms of an evident rupture of pore walls and surface oxidation. These modifications affected both thermomechanical and shape recovery behavior. Furthermore, plasma sterilized foams cytocompatibility was investigated with L929 fibroblast cell line in vitro, showing a good adhesion and proliferation, as confirmed by SEM observation and Alamar blue assay. The obtained results contribute to define the role of shape memory foams as biomaterials and open novel questions on the role of sterilization technique effects on cellular solids.

  15. Application of acid modified polyurethane foam surface for detection and removing of organochlorine pesticides from wastewater.

    Science.gov (United States)

    Moawed, E A; Radwan, A M

    2017-02-15

    The commercial polyurethane foam was acid modified to get an inexpensive adsorbent (AM-PUF) has highly surface polarity and sorption capacity. The elemental analysis, scanning electron microscopy, thermal analysis, ultraviolet/visible/infrared spectroscopies and X-ray diffraction were used for characterization of AM-PUF. The surface of AM-PUF has amorphous character (broadband at 2θ, 21.75°) and contains several active sites e.g. NH, OH, CO, CC and COC groups. The electrical conductivity (σ), iodine value and methylene blue index of AM-PUF are 1.7×10 -5 Ω -1 m -1 , 208mg/g and 107mg/g. The AM-PUF has a high efficiency for completely removing (99-100%) of Aldrin, DDT, Endrin, Heptachlor, Heptachlor epoxide and Lindane pesticides in both acidic and alkaline solutions. The removing rates of the organochlorine pesticides from wastewater are very rapid (t 1/2 =22s). The negative value of ΔG (-10.9kJ/mol) for removing of OCPs using AM-PUF showed that the feasibility of the removing process and its spontaneous nature. Copyright © 2017 Elsevier B.V. All rights reserved.

  16. Suction blister grafting - Modifications for easy harvesting and grafting

    Directory of Open Access Journals (Sweden)

    2012-01-01

    Full Text Available Suction blister grafting is a simple modality of treatment of patients with resistant and stable vitiligo. But raising the blisters may be time consuming and transferring to the recipient site may be difficult as the graft is ultrathin. By doing some modifications we can make the technique simpler and easier. We can decrease the blister induction time by intradermal injection of saline, exposure to Wood′s lamp, intrablister injection of saline. By these methods we can decrease the blister induction time from 2-3 hrs to 45-90 minutes. After harvesting the graft, it can be transferred to the recipient area by taking the graft on a sterile glass slide, on the gloved finger, rolling the graft over a sterile syringe and then spreading on the recipient area, or taking on the sterile wrapper of paraffin dressing and then placing over the recipient area.

  17. Isolation and characterization of a bacterium which utilizes polyester polyurethane as a sole carbon and nitrogen source.

    Science.gov (United States)

    Nakajima-Kambe, T; Onuma, F; Kimpara, N; Nakahara, T

    1995-06-01

    Various soil samples were screened for the presence of microorganisms which have the ability to degrade polyurethane compounds. Two strains with good polyurethane degrading activity were isolated. The more active strain was tentatively identified as Comamonas acidovorans. This strain could utilize polyester-type polyurethanes but not the polyether-type polyurethanes as sole carbon and nitrogen sources. Adipic acid and diethylene glycol were probably the main degradation products when polyurethane was supplied as a sole carbon and nitrogen source. When ammonium nitrate was used as nitrogen source, only diethylene glycol was detected after growth on polyurethane.

  18. Blue ocean leadership.

    Science.gov (United States)

    Kim, W Chan; Mauborgne, Renée

    2014-05-01

    Ten years ago, two INSEAD professors broke ground by introducing "blue ocean strategy," a new model for discovering uncontested markets that are ripe for growth. In this article, they apply their concepts and tools to what is perhaps the greatest challenge of leadership: closing the gulf between the potential and the realized talent and energy of employees. Research indicates that this gulf is vast: According to Gallup, 70% of workers are disengaged from their jobs. If companies could find a way to convert them into engaged employees, the results could be transformative. The trouble is, managers lack a clear understanding of what changes they could make to bring out the best in everyone. Here, Kim and Mauborgne offer a solution to that problem: a systematic approach to uncovering, at each level of the organization, which leadership acts and activities will inspire employees to give their all, and a process for getting managers throughout the company to start doing them. Blue ocean leadership works because the managers' "customers"-that is, the people managers oversee and report to-are involved in identifying what's effective and what isn't. Moreover, the approach doesn't require leaders to alter who they are, just to undertake a different set of tasks. And that kind of change is much easier to implement and track than changes to values and mind-sets.

  19. Bone grafting options in children.

    Science.gov (United States)

    Betz, Randal R; Lavelle, William F; Samdani, Amer F

    2010-08-01

    Retrospective review of the literature. To review the current literature as well as recent trends in bone grafting techniques available for children. The currently accepted gold standard in bone grafting for adolescent idiopathic scoliosis (AIS) is autogenous iliac crest. Due to questions concerning complications such as donor site pain, other options have been explored, including various allograft sources, demineralized bone matrix, and bone morphogenetic protein. A review of the current medical literature was completed and additional case examples are presented. A review of the literature reveals that up to 31% of patients have persistent pain at 2 years post surgery when autogenous iliac crest bone graft is harvested. Allograft supplementation of local autograft has been demonstrated in the literature to be as effective as autogenous iliac crest bone grafting in contributing to a successful posterior spinal fusion in patients with AIS. Modern demineralized bone matrix formulations have been found in both animal models as well as in a recent retrospective clinical review to contribute to a successful posterior spinal fusion in AIS. Bone morphogenetic protein has been shown to contribute to a successful posterior spinal fusion in complex pediatric spinal deformity patients. At 2 years follow-up, patients who underwent a posterior instrumented spinal fusion that was not augmented with any bone graft appear to have successful spinal fusions. Although autogenous iliac bone graft remains the benchmark to which bone grafting materials are compared, other options including the placement of no bone graft at all provides similar fusion rates in patients with AIS.

  20. Biomaterial based novel polyurethane adhesives for wood to wood and metal to metal bonding

    OpenAIRE

    Patel,Mitesh Ramanlal; Shukla,Jignesh Markandray; Patel,Natvarbhai Khodidas; Patel,Ketan Haribhai

    2009-01-01

    Polyurethane adhesives made from synthetic chemicals are non-biodegradable, costly and difficult to find raw materials from local market. To avoid solid pollution problem, cost effectiveness and easy availability of raw materials, biomaterials based polyurethane adhesives are used in current industrial interest. Direct use of castor oil in polyurethane adhesive gives limited hardness. Modification on active sites of castor oil to utilize double bond of unsaturated fatty acid and carboxyl grou...

  1. Radiation grafting on natural films

    Science.gov (United States)

    Lacroix, M.; Khan, R.; Senna, M.; Sharmin, N.; Salmieri, S.; Safrany, A.

    2014-01-01

    Different methods of polymer grafting using gamma irradiation are reported in the present study for the preparation of newly functionalized biodegradable films, and some important properties related to their mechanical and barrier properties are described. Biodegradable films composed of zein and poly(vinyl alcohol) (PVA) were gamma-irradiated in presence of different ratios of acrylic acid (AAc) monomer for compatibilization purpose. Resulting grafted films (zein/PVA-g-AAc) had their puncture strength (PS=37-40 N mm-1) and puncture deformation (PD=6.5-9.8 mm) improved for 30% and 50% PVA in blend, with 5% AAc under 20 kGy. Methylcellulose (MC)-based films were irradiated in the presence of 2-hydroxyethyl methacrylate (HEMA) or silane, in order to determine the effect of monomer grafting on the mechanical properties of films. It was found that grafted films (MC-g-HEMA and MC-g-silane) using 35% monomer performed higher mechanical properties with PS values of 282-296 N mm-1 and PD of 5.0-5.5 mm under 10 kGy. Compatibilized polycaprolactone (PCL)/chitosan composites were developed via grafting silane in chitosan films. Resulting trilayer grafted composite film (PCL/chitosan-g-silane/PCL) presented superior tensile strength (TS=22 MPa) via possible improvement of interfacial adhesion (PCL/chitosan) when using 25% silane under 10 kGy. Finally, MC-based films containing crystalline nanocellulose (CNC) as a filling agent were prepared and irradiated in presence of trimethylolpropane trimethacrylate (TMPTMA) as a grafted plasticizer. Grafted films (MC-g-TMPTMA) presented superior mechanical properties with a TS of 47.9 MPa and a tensile modulus (TM) of 1792 MPa, possibly due to high yield formation of radicals to promote TMPTMA grafting during irradiation. The addition of CNC led to an additional improvement of the barrier properties, with a significant 25% reduction of water vapor permeability (WVP) of grafted films.

  2. Instant BlueStacks

    CERN Document Server

    Judge, Gary

    2013-01-01

    Get to grips with a new technology, understand what it is and what it can do for you, and then get to work with the most important features and tasks. A fast-paced, example-based approach guide for learning BlueStacks.This book is for anyone with a Mac or PC who wants to run Android apps on their computer. Whether you want to play games that are freely available for Android but not your computer, or you want to try apps before you install them on a physical device or use it as a development tool, this book will show you how. No previous experience is needed as this is written in plain English

  3. Development of bacterially resistant polyurethane for coating medical devices

    International Nuclear Information System (INIS)

    Roohpour, Nima; Moshaverinia, Alireza; Wasikiewicz, Jaroslaw M; Paul, Deepen; Vadgama, Pankaj; Wilks, Mark; Millar, Michael

    2012-01-01

    Polyurethanes have been widely used in medicine for coating and packaging implantable and other medical devices. Polyether-urethanes, in particular, have superior mechanical properties and are biocompatible, but in common with other medical materials they are susceptible to microbial film formation. In this study, polyether-urethane was end-capped with silver lactate and silver sulfadiazine functional groups to produce a bacterially resistant polymer without sacrificing the useful mechanical properties of the polyether-polyurethane. The silver ions were covalently incorporated into the polymer during chain extension of the prepolymer. The functionalized polymers were structurally characterized by light scattering, electron microscopy, NMR, FTIR and Raman spectroscopy. Mechanical properties, hydrophilicity, in vitro stability and antibacterial action of polymers were also investigated. Results indicate that both silver salts were successfully incorporated into the polymer structure without significant effect on mechanical properties, whilst conferring acceptable bacterial resistance.

  4. Extraction kinetics of uranium (VI) with polyurethane foam

    International Nuclear Information System (INIS)

    Huang, Ting-Chia; Chen, Dong-Hwang; Huang, Shius-Dong; Huang, Ching-Tsven; Shieh, Mu-Chang.

    1993-01-01

    The extraction kinetics of uranium(VI) from aqueous nitrate solution with polyether-based polyurethane foam was investigated in a batch reactor with automatic squeezing. The extraction curves of uranium(VI) concentration in solution vs. extraction time exhibited a rather rapid exponential decay within the first few minutes, followed by a slower exponential decay during the remaining period. This phenomenon can be attributed to the presence of two-phase structure, hard segment domains and soft segment matrix in the polyurethane foam. A two-stage rate model expressed by a superposition of two exponential curves was proposed, according to which the experimental data were fitted by an optimization method. The extraction rate of uranium (VI) was also found to increase with increasing temperature, nitrate concentration, and hydration of the cation of nitrate salt. (author)

  5. Properties of rigid polyurethane foams filled with glass microspheres

    Science.gov (United States)

    Yakushin, V.; Bel'kova, L.; Sevastyanova, I.

    2012-11-01

    The effect of hollow glass microspheres with a density of 125 kg/m3 on the properties of low-density (54-90 kg/m3) rigid polyurethane foams is investigated. The thermal expansion coefficient of the foams and their properties in tension and compression in relation to the content of the microspheres (0.5-5 wt.%) are determined. An increase in the characteristics of the material in compression in the foam rise direction with increasing content of filler is revealed. The limiting content of the microspheres above which the mechanical characteristics of the filled foams begin to decrease is found. The distribution of the microspheres in elements of the cellular structure of the polyurethane foams is examined.

  6. Structure-property relationships of flexible polyurethane foams

    Science.gov (United States)

    Aneja, Ashish

    This study examined several features of flexible polyurethane foams from a structure-property perspective. A major part of this dissertation addresses the issue of connectivity of the urea phase and its influence on mechanical and viscoelastic properties of flexible polyurethane foams and their plaque counterparts. Lithium salts (LiCl and LiBr) were used as additives to systematically alter the phase separation behavior, and hence the connectivity of the urea phase at different scale lengths. Macro connectivity, or the association of the large scale urea rich aggregates typically observed in flexible polyurethane foams was assessed using SAXS, TEM, and AFM. These techniques showed that including a lithium salt in the foam formulation suppressed the formation of the urea aggregates and thus led to a loss in the macro level connectivity of the urea phase. WAXS and FTIR were used to demonstrate that addition of LiCl or LiBr systematically disrupted the local ordering of the hard segments within the microdomains, i.e., it led to a reduction of micro level connectivity or the regularity in segmental packing of the urea phase. Based on these observations, the interaction of the lithium salt was thought to predominantly occur with the urea hard segments, and this hypothesis was confirmed using quantum mechanical calculations. Another feature of this research investigated model trisegmented polyurethanes based on monofunctional polyols, or "monos", with water-extended toluene diisocyanate (TDI) based hard segments. The formulations of the monol materials were maintained similar to those of flexible polyurethane foams with the exceptions that the conventional polyol was substituted by an oligomeric monofunctional polyether of ca. 1000 g/mol molecular weight. Plaques formed from these model systems were shown to be solid materials even at their relatively low molecular weights of 3000 g/mol and less, AFM phase images, for the first time, revealed the ability of the hard

  7. Gamma radiation effect on sisal / polyurethane composites without coupling agents

    Energy Technology Data Exchange (ETDEWEB)

    Vasco, Marina Cardoso; Claro Neto, Salvador; Nascimento, Eduardo Mauro; Azevedo, Elaine, E-mail: marina.mcv@gmail.com [University of Patras (Greece); Universidade de Sao Paulo (USP) Sao Carlos, SP (Brazil); Universidade Tecnologica Federal do Parana (UTFPR), Curitiba, PR (Brazil)

    2017-04-15

    Natural fibers and polyurethane based composites may present chemical bonding between the components of the polymer and the lignin of the fiber. The incidence of radiation can cause degradation of the polymeric material and alter its mechanical properties. The objective of this study was to obtain and characterize cold pressed composites from polyurethane derived from castor oil and sisal fibers, without coupling agents, through thermogravimetric and mechanical tests, before and after the incidence of 25 kGy dose of gamma radiation. Woven composites that were not irradiated had maximum values of 4.40 GPa for flexural elastic modulus on three point flexural test and dispersed fiber composite that were not irradiated had maximum values of 2.25 GPa. These materials are adequate for use in non-structural applications in radiotherapy and radiodiagnostic rooms. (author)

  8. The small angle neutron scattering study on the segmented polyurethane

    Energy Technology Data Exchange (ETDEWEB)

    Sudirman; Gunawan; Prasetyo, S.M.; Karo Karo, A.; Lahagu, I.M.; Darwinto, Tri [Materials Science Research Center, National Nuclear Energy Agency, Serpong, Tangerang (Indonesia)

    1999-10-01

    The distance between hard segment (HS) and soft segment (SS) of segmented polyurethane have been determined using the Small Angle Neutron Scattering (SANS) technique. The segmented Polyurethanes (SPU) are linear multiblock copolymers, which include elastomer thermoplastic. SPU consist of hard segment and soft segment, each has tendency to make a group with similar type to form a domain. The soft segments used were polypropylene glycol (PPG) and 4,4 diphenylmethane diisocyanate (MDI), while l,4 butanediol (BD) was used as hard segment. The characteristic of SPU depends on its phase structure which is affected by several factors, such as type of chemical formula and the composition of the HS and SS, solvent as well as the synthesizing process. The samples used in this study were SPU56 and SPU68. Based on the appearance of SANS profile, it was obtained that domain distances are 12.32 nm for the SPU56 and 19 nm for the SPU68. (author)

  9. Glycolysis recycling of rigid waste polyurethane foam from refrigerators.

    Science.gov (United States)

    Zhu, P; Cao, Z B; Chen, Y; Zhang, X J; Qian, G R; Chu, Y L; Zhou, M

    2014-01-01

    Rapid growth of rigid waste polyurethane (WPUR) foam from refrigerators attracts the attention all over the world. In this study, glycolysis was chosen to treat WPUR from scrapped refrigerators collected in Shanghai, China. Glycolysis reagents and catalysts were selected. The results indicated that the glycolysis efficiency of ethylene glycol (EG) was higher than that of diethylene glycol, and the catalytic efficiency of alkali metal salts (NaOH) was more excellent than that of triethanolamine and organic salts of alkali metal (NaAc). When EG was 100%WPUR as a glycolysis reagent and NaOH was 1%WPUR as a catalyst at a constant temperature of 197.85°C for 2 h, the glycolysis product had the highest glycolysis conversion rate. In order to maximize the recycling of WPUR, regenerative Polyurethane was performed by adding 10% distilled mixed polyol, which conformed to the QB/T 26689-2011 requirements.

  10. Performance of selected polyurethane joint sealants in concrete structures

    Directory of Open Access Journals (Sweden)

    Nečasová Barbora

    2018-01-01

    Full Text Available Often underestimated and neglected, joint sealants in concrete structures play an important role in protecting the structure against its premature deterioration. The focus of the presented paper lays upon the issue of sealing of joints in concrete structures. Concrete is one of the most difficult materials to seal since there are always small particles of dust and the material itself. In this paper, the joint will be viewed as traditional expansion joint. Two representatives of flexible one component polyurethane sealants were selected. The main reason for this selection was that conventional repair materials are usually very rigid and easily incline towards the formation of cracks and gaps. The aim of this paper is not only to verify the suitability of selected materials but also to demonstrate that polyurethane sealants might be a better and long-lasting solution for filling of joints and patching of cracks within concrete structures.

  11. Papain Immobilized Polyurethane Film as Antimicrobial Food Package

    OpenAIRE

    M. Cynthya; V. Prabhawathi; D. Mukesh

    2014-01-01

    Food contamination occurs during post process handling. This leads to spoilage and growth of pathogenic microorganisms in the food, thereby reducing its shelf life or spreading of food borne diseases. Several methods are tried and one of which is use of antimicrobial packaging. Here, papain, a protease enzyme, is covalently immobilized with the help of glutarldehyde on polyurethane and used as a food wrap to protect food from microbial contamination. Covalent immobilizati...

  12. Glycolysis of flexible polyurethane foam in recycling of car seats

    Czech Academy of Sciences Publication Activity Database

    Beneš, Hynek; Rösner, J.; Holler, Petr; Synková, Hana; Kotek, Jiří; Horák, Zdeněk

    2007-01-01

    Roč. 18, č. 2 (2007), s. 149-156 ISSN 1042-7147. [International Conference on Polymeric Materials in Automotive , Slovak Rubber Conference /17./. Bratislava, 10.5.2005-12.5.2005] R&D Projects: GA MŽP SL/7/26/05 Institutional research plan: CEZ:AV0Z40500505 Keywords : polyurethanes * foams * recycling Subject RIV: CD - Macromolecular Chemistry Impact factor: 1.504, year: 2007

  13. The effects of using immobilizer made of the polyurethane foam

    International Nuclear Information System (INIS)

    Kim, Yong Hwan; Chung, Sang Hwa; Kim, Hwa Young; Lim, Shin Taek; Oh, Sae Dong

    1992-01-01

    The immogilzer for control the patient movement during the radiation beam on was made of the polyurethane foam. The time consumption is abut 8 minutes for completely making the immobilizer. In this experimental study, the effects of using the individual immobilizer have shown that the patients have had always a same position with comfortable and high reproducibilities. Furthermore, it has shown the time for patient setup was decreased by using the individual patient immobilizer.

  14. Environmental Friendly Polyurethane Coatings Based On Hyperbranched Resin

    OpenAIRE

    Ashraf M. Elsaid; Magd M. Badr; Mohamed S. Selim

    2013-01-01

    Water borne polyurethane (PU) based on newly prepared hyperbranched poly (amine-ester) (HBPAE) was applied and evaluated as organic coating material. HBPAE was prepared through one-pot synthesis between trimethylol propane as a core and AB2 branched monomer which was obtained via Michal addition of methyl methacrylate (MMA) and diethanol amine (DEA). PU was prepared from HBPAE using different ratios of toluene diisocyanate (TDI) to form cured coating film. The prepared HBPAE was characterized...

  15. Preparation and characterization of polyurethane - Fe powder composites

    Czech Academy of Sciences Publication Activity Database

    Špírková, Milena; Bureš, R.; Fáberová, M.; Trchová, Miroslava; Strachota, Adam; Kaprálková, Ludmila

    2011-01-01

    Roč. 11, 3/4 (2011), s. 290-299 ISSN 1335-8987 R&D Projects: GA ČR GAP108/10/0195 Institutional research plan: CEZ:AV0Z40500505 Keywords : polyurethanes * polybutadiene diol * Fe powder Subject RIV: CD - Macromolecular Chemistry http://www.imr.saske.sk/pmp/issue/3-4-2011/PMP_Vol11_No3-4_p_290-299.pdf

  16. Dynamic mechanical and water sorption behaviour of ordered polyurethanes

    Czech Academy of Sciences Publication Activity Database

    Valentová, H.; Nedbal, J.; Ilavský, Michal; Pissis, P.

    307-310, - (2002), s. 304-310 ISSN 0022-3093 R&D Projects: GA ČR GA203/00/1314; GA ČR GA203/00/D114; GA AV ČR IAA4112901 Institutional research plan: CEZ:AV0Z4050913 Keywords : polyurethanes * mesogenic diol * polybutadiene Subject RIV: CD - Macromolecular Chemistry Impact factor: 1.435, year: 2002

  17. Thermomechanical constitutive modeling of polyurethane-series shape memory polymer

    Energy Technology Data Exchange (ETDEWEB)

    Tobushi, H.; Ito, N.; Takata, K. [Aichi Inst. of Technol., Nagoya (Japan). Dept. of Mech. Eng.; Hayashi, S. [Nagoya Research and Development Center, Mitsubishi Heavy Industries, Ltd., Nagoya (Japan)

    2000-07-01

    In order to describe the thermomechanical properties in shape memory polymer of polyurethane series, a thermomechanical constitutive model was developed. In order to describe the variation in mechanical properties due to the glass transition, coefficients in the model were expressed by a single exponential function of temperature. The proposed theory expressed well the thermomechanical properties of the material, such as shape fixity and shape recovery. (orig.)

  18. Blue phases as photonic crystals

    Science.gov (United States)

    Bohley, Christian; Scharf, Toralf

    2003-12-01

    The Liquid Crystalline Blue Phases (LC BPs) and their diffraction patterns were investigated experimentally and theoretically. We stabilized Blue Phases and measured their diffraction pattern for different wavelengths of monochromatic light with the help of a conoscopic setup of a polarization microscope. Moreover, the diffraction patterns were calculated with the help of a 4x4 matrix method which allows amplitude and phase investigations.

  19. A study on the adsorption of methylene blue onto gum ghatti/TiO2nanoparticles-based hydrogel nanocomposite

    CSIR Research Space (South Africa)

    Mittal, Hemant

    2016-07-01

    Full Text Available The objective of this work was to study the isotherm and kinetic models for the adsorption of methylene blue (MB) onto a TiO(sub2) nanoparticle (TiO(sub2)NP)-containing hydrogel nanocomposite (HNC) of polyacrylamide-grafted gum ghatti (PAAm...

  20. Triggerable Degradation of Polyurethanes for Tissue Engineering Applications.

    Science.gov (United States)

    Xu, Cancan; Huang, Yihui; Wu, Jinglei; Tang, Liping; Hong, Yi

    2015-09-16

    Tissue engineered and bioactive scaffolds with different degradation rates are required for the regeneration of diverse tissues/organs. To optimize tissue regeneration in different tissues, it is desirable that the degradation rate of scaffolds can be manipulated to comply with various stages of tissue regeneration. Unfortunately, the degradation of most degradable polymers relies solely on passive controlled degradation mechanisms. To overcome this challenge, we report a new family of reduction-sensitive biodegradable elastomeric polyurethanes containing various amounts of disulfide bonds (PU-SS), in which degradation can be initiated and accelerated with the supplement of a biological product: antioxidant-glutathione (GSH). The polyurethanes can be processed into films and electrospun fibrous scaffolds. Synthesized materials exhibited robust mechanical properties and high elasticity. Accelerated degradation of the materials was observed in the presence of GSH, and the rate of such degradation depends on the amount of disulfide present in the polymer backbone. The polymers and their degradation products exhibited no apparent cell toxicity while the electrospun scaffolds supported fibroblast growth in vitro. The in vivo subcutaneous implantation model showed that the polymers prompt minimal inflammatory responses, and as anticipated, the polymer with the higher disulfide bond amount had faster degradation in vivo. This new family of polyurethanes offers tremendous potential for directed scaffold degradation to promote maximal tissue regeneration.

  1. Chemical and Enzymatic Hydrolysis of Polyurethane/Polylactide Blends

    Directory of Open Access Journals (Sweden)

    Joanna Brzeska

    2015-01-01

    Full Text Available Polyether-esterurethanes containing synthetic poly[(R,S-3-hydroxybutyrate] (R,S-PHB and polyoxytetramethylenediol in soft segments and polyesterurethanes with poly(ε-caprolactone and poly[(R,S-3-hydroxybutyrate] were blended with poly([D,L]-lactide (PLA. The products were tested in terms of their oil and water absorption. Oil sorption tests of polyether-esterurethane revealed their higher response in comparison to polyesterurethanes. Blending of polyether-esterurethanes with PLA caused the increase of oil sorption. The highest water sorption was observed for blends of polyether-esterurethane, obtained with 10% of R,S-PHB in soft segments. The samples mass of polyurethanes and their blends were almost not changed after incubation in phosphate buffer and trypsin and lipase solutions. Nevertheless the molecular weight of polymers was significantly reduced after degradation. It was especially visible in case of incubation of samples in phosphate buffer what suggested the chemical hydrolysis of polymer chains. The changes of surface of polyurethanes and their blends, after incubation in both enzymatic solutions, indicated on enzymatic degradation, which had been started despite the lack of mass lost. Polyurethanes and their blends, contained more R,S-PHB in soft segments, were degraded faster.

  2. Cellulose based hybrid hydroxylated adducts for polyurethane foams

    Science.gov (United States)

    De Pisapia, Laura; Verdolotti, Letizia; Di Mauro, Eduardo; Di Maio, Ernesto; Lavorgna, Marino; Iannace, Salvatore

    2012-07-01

    Hybrid flexible polyurethane foams (HPU) were synthesized by using a hybrid hydroxilated adduct (HHA) based on renewable resources. In particular the HHA was obtained by dispersing cellulose wastes in colloidal silica at room temperature, pressure and humidity. The colloidal silica was selected for its ability of modifying the cellulose structure, by inducing a certain "destructurization" of the crystalline phase, in order to allow cellulose to react with di-isocyanate for the final synthesis of the polyurethane foam. In fact, cellulose-polysilicate complexes are engaged in the reaction with the isocyanate groups. This study provides evidence of the effects of the colloidal silica on the cellulose structure, namely, a reduction of the microfiber cellulose diameter and the formation of hydrogen bonds between the polysilicate functional groups and the hydroxyl groups of the cellulose, as assessed by IR spectroscopy and solid state NMR. The HHA was added to a conventional polyol in different percentages (between 5 and 20%) to synthesize HPU in presence of catalysts, silicone surfactant and diphenylmethane diisocyanate (MDI). The mixture was expanded in a mold and cured for two hours at room temperature. Thermal analysis, optical microscopy and mechanical tests were performed on the foams. The results highlighted an improvement of thermal stability and a decrease of the cell size with respect neat polyurethane foam. Mechanical tests showed an improvement of the elastic modulus and of the damping properties with increasing HHA amount.

  3. Green waste cooking oil-based rigid polyurethane foam

    Science.gov (United States)

    Enderus, N. F.; Tahir, S. M.

    2017-11-01

    Polyurethane is a versatile polymer traditionally prepared using petroleum-based raw material. Petroleum, however, is a non-renewable material and polyurethane produced was found to be non-biodegradable. In quest for a more environmentally friendly alternative, wastecooking oil, a highly abundant domestic waste with easily derivatized structure, is a viable candidate to replace petroleum. In this study,an investigation to determine physical and chemical properties of rigid polyurethane (PU) foam from waste cooking oil (WCO) was carried out. WCO was first adsorbed by using coconut husk activated carbon adsorbent prior to be used for polyol synthesis. The purified WCO was then used to synthesize polyol via transesterification reaction to yield alcohol groups in the WCO chains structure. Finally, the WCO-based polyol was used to prepare rigid PU foam. The optimum formulation for PU formation was found to be 90 polyol: 60 glycerol: 54 water: 40 diethanolamine: 23 diisocyanate. The rigid PU foam has density of 208.4 kg/m3 with maximum compressive strength and capability to receive load at 0.03 MPa and 0.09 kN, respectively. WCO-based PU can potentially be used to replace petroleum-based PU as house construction materials such as insulation panels.

  4. (Biodegradable Ionomeric Polyurethanes Based on Xanthan: Synthesis, Properties, and Structure

    Directory of Open Access Journals (Sweden)

    T. V. Travinskaya

    2017-01-01

    Full Text Available New (biodegradable environmentally friendly film-forming ionomeric polyurethanes (IPU based on renewable biotechnological polysaccharide xanthan (Xa have been obtained. The influence of the component composition on the colloidal-chemical and physic-mechanical properties of IPU/Xa and based films, as well as the change of their properties under the influence of environmental factors, have been studied. The results of IR-, PMS-, DMA-, and X-ray scattering study indicate that incorporation of Xa into the polyurethane chain initiates the formation of a new polymer structure different from the structure of the pure IPU (matrix: an amorphous polymer-polymer microdomain has occurred as a result of the chemical interaction of Xa and IPU. It predetermines the degradation of the IPU/Xa films as a whole, unlike the mixed polymer systems, and plays a key role in the improvement of material performance. The results of acid, alkaline hydrolysis, and incubation into the soil indicate the increase of the intensity of degradation processes occurring in the IPU/Xa in comparison with the pure IPU. It has been shown that the introduction of Xa not only imparts the biodegradability property to polyurethane, but also improves the mechanical properties.

  5. Vegetable Oil-Based Hyperbranched Thermosetting Polyurethane/Clay Nanocomposites

    Directory of Open Access Journals (Sweden)

    Deka Harekrishna

    2009-01-01

    Full Text Available Abstract The highly branched polyurethanes and vegetable oil-based polymer nanocomposites have been showing fruitful advantages across a spectrum of potential field of applications.Mesua ferreaL. seed oil-based hyperbranched polyurethane (HBPU/clay nanocomposites were prepared at different dose levels by in situ polymerization technique. The performances of epoxy-cured thermosetting nanocomposites are reported for the first time. The partially exfoliated structure of clay layers was confirmed by XRD and TEM. FTIR spectra indicate the presence of H bonding between nanoclay and the polymer matrix. The present investigation outlines the significant improvement of tensile strength, scratch hardness, thermostability, water vapor permeability, and adhesive strength without much influencing impact resistance, bending, and elongation at break of the nanocomposites compared to pristine HBPU thermoset. An increment of two times the tensile strength, 6 °C of melting point, and 111 °C of thermo-stability were achieved by the formation of nanocomposites. An excellent shape recovery of about 96–99% was observed for the nanocomposites. Thus, the formation of partially exfoliated clay/vegetable oil-based hyperbranched polyurethane nanocomposites significantly improved the performance.

  6. Graft intolerance syndrome requiring graft nephrectomy after late kidney graft failure: can it be predicted? A retrospective cohort study.

    Science.gov (United States)

    Bunthof, Kim L W; Verhoeks, Carmen M; van den Brand, Jan A J G; Hilbrands, Luuk B

    2018-02-01

    Graft nephrectomy is recommended in case of early graft failure. When the graft fails more than 3-6 months after transplantation, it is current practice to follow a wait-and-see policy. A common indication for graft removal is the graft intolerance syndrome. We aimed to create a risk prediction model for the occurrence of graft intolerance resulting in graft nephrectomy. We collected data of kidney transplantations performed in our center between 1980 and 2010 that failed at least 6 months after transplantation. We evaluated the association between baseline characteristics and the occurrence of graft nephrectomy because of graft intolerance using a competing risk regression model. Prognostic factors were included in a multivariate prediction model. In- and exclusion criteria were met in 288 cases. In 48 patients, the graft was removed because of graft intolerance. Donor age, the number of rejections, and shorter graft survival were predictive factors for graft nephrectomy because of the graft intolerance syndrome. These factors were included in a prediction rule. Using donor age, graft survival, and the number of rejections, clinicians can predict the need for graft nephrectomy with a reasonable accuracy. © 2017 Steunstichting ESOT.

  7. Graft nephrectomy: The SGPGI experience

    Directory of Open Access Journals (Sweden)

    Nand Kishore Arvind

    2002-01-01

    Full Text Available Background: Graft nephrectomy is often considered a hazardous procedure with high morbidity and occasional mortality, and this may pose a technical challenge. The aim of this study was to evaluate the indications, etiology and complications following graft nephrectomy. Materials and Methods: From 1988 to 2001, among total of 1,019 live related renal transplants carried at our center, 46 underwent graft nephrectomy. Patients were divided into 2 groups depending on timing of graft re-moval. The early group included 27 patients (within 2 months of transplantation while in late group (graft re-moval after 2 months of transplantation there were 19 patients. The 2 groups were compared in terms of indica-tion, etiology and complications. Results: In early group the indications for graft removal were acute rejection, thrombosis/infarction and hyper-acute rejection, while in late group the indications were pain, hematuria, fever, hypertension and infection along with chronic failure. Overall, the external iliac artery in-jury occurred in I and 4 patients in early and late group respectively. Major blood loss occurred in I and 6 pa-tients in early and late graft removal respectively. There were 2 deaths in early group due to ftdminant pneumoni-tis that progressed to sepsis and disseminated intravascu-lar coagulation. There were 9 major wound infections all in early group except in 2 patients of late group. Respira-tory infections occurred in 14 patients in early group and 1 in late group. In early group patients had CNS compli-cations in form of seizures, clinical depression and delusional psychosis in 12 patients. Conclusions: Our experience highlights the risk in-volved in graft nephrectomies. Severe acute rejection and thrombosis lead to early graft nephrectomies. Pain, hematuria, infection and hypertension in setting of chronic rejection are predominant causes for the delayed graft ne- phrectomies. Early graft nephrectomy, though technically easy, is

  8. Graft union formation in Douglas-fir.

    Science.gov (United States)

    D.L. Copes

    1969-01-01

    Greenhouse-grown Douglas-fir (Pseudotsuga menziesii [Mirb.] Franco) graft unions were examined between 2 and 84 days after grafting. Room temperature was maintained at 60-70 F throughout the growing season. In most respects grafts of Douglas-fir followed development patterns previously reported for spruce and pine grafts, but specific differences...

  9. Grafting compatibility between selected rootstocks and Tanzanian ...

    African Journals Online (AJOL)

    The grafted seedlings with graft union tied using grafting clips were healed in a dark chamber for three days and then in a transparent chamber for three days. The average temperature and relative humidity in both chambers were maintained at 21-30°C and 85-95 %, respectively. The grafted seedlings were hardened for ...

  10. Saphenous vein graft vs. radial artery graft searching for the best second coronary artery bypass graft

    Science.gov (United States)

    Al-Sabti, Hilal Ali; Al Kindi, Adil; Al-Rasadi, Khalid; Banerjee, Yajnavalka; Al-Hashmi, Khamis; Al-Hinai, Ali

    2013-01-01

    Coronary artery bypass grafting (CABG) was first used in the late 1960s. This revolutionary procedure created hope among ischemic heart disease patients. Multiple conduits are used and the golden standard is the left internal mammary artery to the left anterior descending artery. Although all approaches were advocated by doctors, the use of saphenous vein grafts became the leading approach used by the majority of cardiac surgeons in the 1970s. The radial artery graft was introduced at the same time but was not as prevalent due to complications. It was reintroduced into clinical practice in 1989. The procedure was not well received initially but it has since shown superiority in patency as well as long-term survival after CABG. This review provides a summary of characteristics, technical features and patency rates of the radial artery graft in comparison with venous conduits. Current studies and research into radial artery grafts and saphenous vein grafts for CABG are explored. However, more studies are required to verify the various findings of the positive effects of coronary artery bypass grafting with the help of radial arteries on mortality and long-lasting patency. PMID:24198449

  11. 40 CFR 63.1299 - Standards for slabstock flexible polyurethane foam production-source-wide emission limitation.

    Science.gov (United States)

    2010-07-01

    ... polyurethane foam production-source-wide emission limitation. 63.1299 Section 63.1299 Protection of Environment... Flexible Polyurethane Foam Production § 63.1299 Standards for slabstock flexible polyurethane foam... of foam grades produced in the month on foam production line j. limiti = HAP ABA formulation limit...

  12. 40 CFR 63.1296 - Standards for slabstock flexible polyurethane foam production-HAP ABA equipment leaks.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 11 2010-07-01 2010-07-01 true Standards for slabstock flexible polyurethane foam production-HAP ABA equipment leaks. 63.1296 Section 63.1296 Protection of Environment... Flexible Polyurethane Foam Production § 63.1296 Standards for slabstock flexible polyurethane foam...

  13. 40 CFR 63.1295 - Standards for slabstock flexible polyurethane foam production-HAP ABA storage vessels.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 11 2010-07-01 2010-07-01 true Standards for slabstock flexible polyurethane foam production-HAP ABA storage vessels. 63.1295 Section 63.1295 Protection of Environment... Flexible Polyurethane Foam Production § 63.1295 Standards for slabstock flexible polyurethane foam...

  14. 40 CFR 63.1298 - Standards for slabstock flexible polyurethane foam production-HAP emissions from equipment cleaning.

    Science.gov (United States)

    2010-07-01

    ... polyurethane foam production-HAP emissions from equipment cleaning. 63.1298 Section 63.1298 Protection of... Pollutants for Flexible Polyurethane Foam Production § 63.1298 Standards for slabstock flexible polyurethane foam production—HAP emissions from equipment cleaning. Each owner or operator of a new or existing...

  15. Blue moons and Martian sunsets.

    Science.gov (United States)

    Ehlers, Kurt; Chakrabarty, Rajan; Moosmüller, Hans

    2014-03-20

    The familiar yellow or orange disks of the moon and sun, especially when they are low in the sky, and brilliant red sunsets are a result of the selective extinction (scattering plus absorption) of blue light by atmospheric gas molecules and small aerosols, a phenomenon explainable using the Rayleigh scattering approximation. On rare occasions, dust or smoke aerosols can cause the extinction of red light to exceed that for blue, resulting in the disks of the sun and moon to appear as blue. Unlike Earth, the atmosphere of Mars is dominated by micron-size dust aerosols, and the sky during sunset takes on a bluish glow. Here we investigate the role of dust aerosols in the blue Martian sunsets and the occasional blue moons and suns on Earth. We use the Mie theory and the Debye series to calculate the wavelength-dependent optical properties of dust aerosols most commonly found on Mars. Our findings show that while wavelength selective extinction can cause the sun's disk to appear blue, the color of the glow surrounding the sun as observed from Mars is due to the dominance of near-forward scattering of blue light by dust particles and cannot be explained by a simple, Rayleigh-like selective extinction explanation.

  16. [Skin defect coverage with micro skin graft].

    Science.gov (United States)

    Gümüş, Nazim; Kaya, Yalçin; Karakaya, Sadik; Camci, Cemalettin

    2002-04-01

    The aim of this study is to coverage of the large skin defect with microskin graft. The wound coverage of the large skin defect may be difficult with auto skin graft. In these patients, split thickness skin graft may be used in a bloc shape or expanded skin graft shape and a stamp skin graft shape or expanded stamp skin graft shape. On the other hand, split thickness skin graft may be used as a micrograft shape after the mincing process, which reduces of the graft size in a few millimeters. In this study, 6 patients with skin defect was admitted in our clinic, and their skin defect was treated with micro skin graft. Expansion ratio was 1:15. Epithelialization on the wound surface was completed in 4 to 6 weeks and cobblestone appearance was observed after the wound coverage. Skin defect coverage with micrograft is an effective technique like the other skin graft coverage methods.

  17. Physical properties of a high molecular weight hydroxyl-terminated polydimethylsiloxane modified castor oil based polyurethane/epoxy interpenetrating polymer network composites

    Science.gov (United States)

    Chen, Shoubing; Wang, Qihua; Wang, Tingmei

    2011-06-01

    A series of polyurethane (PU)/epoxy resin (EP) graft interpenetrating polymer network (IPN) composites modified by a high molecular weight hydroxyl-terminated polydimethylsiloxane (HTPDMS) were prepared. The effects of HTPDMS content on the phase structure, damping properties and the glass transition temperature ( Tg) of the HTPDMS-modified PU/EP IPN composites were studied by scanning electron microscopy (SEM) and dynamic mechanical analysis (DMA). Thermogravimetric analysis (TGA) showed that the thermal decomposition temperature of the composites increased with the increase of HTPDMS content. The tensile strength and impact strength of the IPN composites were also significantly improved, especially when the HTPDMS content was 10%. The modified IPN composites were expected to be used as structural damping materials in the future.

  18. Synthesis and characterization of polypyrrole grafted chitin

    Science.gov (United States)

    Ramaprasad, A. T.; Latha, D.; Rao, Vijayalakshmi

    2017-05-01

    Synthesis and characterization of chitin grafted with polypyrrole (PPy) is reported in this paper. Chitin is soaked in pyrrole solution of various concentrations for different time intervals and polymerized using ammonium peroxy disulphate (APS) as an initiator. Grafting percentage of polypyrrole onto chitin is calculated from weight of chitin before and after grafting. Grafting of polymer is further verified by dissolution studies. The grafted polymer samples are characterized by FTIR, UV-Vis absorption spectrum, XRD, DSC, TGA, AFM, SEM and conductivity studies.

  19. Electrospun Polyurethane Fibers for Absorption of Volatile Organic Compounds from Air

    NARCIS (Netherlands)

    Scholten, E.; Bromberg, L.; Rutledge, G.C.; Hatton, T.A.

    2011-01-01

    Electrospun polyurethane fibers for removal of volatile organic compounds (VOC) from air with rapid VOC absorption and desorption have been developed. Polyurethanes based on 4,4-methylenebis(phenylisocyanate) (MDI) and aliphatic isophorone diisocyanate as the hard segments and butanediol and

  20. The use of polyurethane foam as an antimicrobial dressing material in hand surgery

    Directory of Open Access Journals (Sweden)

    Nebil Yesiloglu

    2015-12-01

    Full Text Available Polyurethane foam is generally used in negative pressure-assisted wound closure therapy. It provides an antimicrobial environment around the wound, while reducing the rate of skin maceration. The authors used polyurethane foam in routine hand dressings after hand surgery operations that were performed for both congenital and acquired purposes. [Hand Microsurg 2015; 4(3.000: 91-92

  1. Polyurethanes irradiation by accelerated electrons: molecular and supramolecular evolution, incidence on the extractable and biomedical implications

    International Nuclear Information System (INIS)

    Guignot, C.

    2002-11-01

    Face to the development of radiosterilization and polymers medical devices it was wished to study the behavior of polyurethanes under accelerated electrons in oxidizing atmosphere. This study has been made to reveal the physico chemical and organisational modifications of polyurethanes for a medical use. (N.C.)

  2. The reactive extrusion of thermoplastic polyurethane and the effect of the depolymerization reaction

    NARCIS (Netherlands)

    Verhoeven, V. W. A.; Padsalgikar, A. D.; Ganzeveld, K. J.; Janssen, L. P. B. M.

    The reactive extrusion of thermoplastic polyurethane in a corotating twin-screw extruder was investigated. The polyurethane system consisted of a mixture of 2,4-diphenylmethane diisocyanate (2,4-MDI) and 4,4-MDI, methyl-propane-diol and a polyester polyol. An engineering extrusion model was designed

  3. Light Scattering of TiO2 Nanoparticles Embedded in Polyurethane

    DEFF Research Database (Denmark)

    Gudla, Visweswara Chakravarthy; Canulescu, Stela; Johansen, Villads Egede

    A new approach of enhancing light scattering in polyurethane polymer through the effect of TiO2 nanoparticles (NP) is explored. The TiO2 NP with sizes of 360 nm, 410 nm and 500 nm were dispersed in polyurethane polymer in concentrations ranging from 0.25 wt% up to 2 wt%. Reflectivity and UV-visible...

  4. The study of the curing of the polyurethane coating by method of IR spectroscopy

    Directory of Open Access Journals (Sweden)

    N. A. Korshunova

    2016-12-01

    Full Text Available The results of the study of the curing process of polyurethane compositions with participation of two different catalysts by the method of IR spectroscopy are given. The time dependences of curing of polyurethane coatings from concentrations of catalysts were determined, on the basis of which the most effective catalyst was selected.

  5. Synthesis, characterization, and electrospinning of novel polyisobutylene-based thermoplastic polyurethanes

    Science.gov (United States)

    Cozzens, David

    Synthesis, characterization, and electrospinning of novel biostable polyisobutylene (PIB)-based thermoplastic polyurethanes (TPU) have been performed as materials with potential applications as vascular grafts. The long term in vitro biostability of TPUs containing mixed PIB/poly(tetramethylene oxide) (PTMO) soft segments was studied under accelerated conditions to predict resistance to oxidative degradation in vivo. The PIB-PTMO TPUs showed significant oxidative stability as compared to commercial polyether-based TPU controls, Pellethane™ 2363-55D and 2363-80A, as demonstrated by minimal weight loss compared to the Pellethane™ TPUs which degraded completely in 12 weeks in vitro. Attenuated total reflectance Fourier transform infrared spectroscopy confirmed the degradation of the Pellethane™ samples, whereas no such changes were apparent in the spectra of the PIB-PTMO TPUs. The PIB-PTMO TPUs exhibited a 10-30% drop in tensile strength compared to a drop of 100% for the Pellethane™ TPUs in 12 weeks. The surface properties of thin films of commercial TPUs and novel PIB-PTMO TPUs were characterized by contact angle measurements, X-ray photoelectron spectroscopy, and atomic force microscope (AFM) imaging. PIB-PTMO TPU surfaces show surface enrichment of PIB. AFM imaging showed phase separation and increasing domain sizes with increasing hard segment content. The biocompatibility was investigated by quantifying the adsorption of fouling and passivating proteins, fibrinogen (Fg) and human serum albumin (HSA) respectively, onto thin TPU films using a quartz crystal microbalance with dissipation monitoring (QCM-D). The QCM-D results indicate similar adsorbed amounts of both Fg and HSA on PIB-PTMO TPUs and commercial TPUs. The strength of the protein interactions with the various TPU surfaces measured with AFM (colloidal probe) was similar among the various TPUs. These results suggest excellent biocompatibility of the PIB-PTMO TPUs, similar to that of polyether TPUs

  6. Bone Grafting: Sourcing, Timing, Strategies, and Alternatives.

    Science.gov (United States)

    Egol, Kenneth A; Nauth, Aaron; Lee, Mark; Pape, Hans-Christoph; Watson, J Tracy; Borrelli, Joseph

    2015-12-01

    Acute fractures, nonunions, and nonunions with bone defects or osteomyelitis often need bone graft to facilitate union. There are several factors to consider when it is determined that a bone graft is needed. These factors include the source of the bone graft (autograft vs. allograft), proper timing for placement of the bone graft, strategies to avoid further complications (particularly in the setting of osteomyelitis), and with the development of a variety of bone graft substitutes, whether alternatives to autograft are available and appropriate for the task at hand. Autograft bone has commonly been referred to as the "gold standard" of bone grafts, against which the efficacy of other grafts has been measured. The best timing for when to place a bone graft or substitute is also somewhat controversial, particularly after an open fracture or a potentially contaminated bed. The treatment of infected nonunions, particularly those that require a graft to facilitate healing, can be quite challenging. Typically, the infection is completely eradicated before placement of a bone graft, but achieving a sterile bed and the timing of a bone graft require strategic thinking and planning. This review outlines the benefits of autografts, the most suitable sites for harvesting bone grafts, the timing of bone graft procedures, the potential risks and benefits of grafting in the face of infection, and the currently available bone graft extenders.

  7. Air Pump-Assisted Graft Centration, Graft Edge Unfolding, and Graft Uncreasing in Young Donor Graft Pre-Descemet Endothelial Keratoplasty.

    Science.gov (United States)

    Jacob, Soosan; Narasimhan, Smita; Agarwal, Amar; Agarwal, Athiya; A I, Saijimol

    2017-08-01

    To assess an air pump-assisted technique for graft centration, graft edge unfolding, and graft uncreasing while performing pre-Descemet endothelial keratoplasty (PDEK) using young donor grafts. Continuous pressurized air infusion was used for graft centration, graft edge unfolding, and graft unwrinkling. Ten eyes of 10 patients underwent PDEK with donors aged below 40 years. In all eyes, the donor scrolled into tight scrolls. In all cases, the air pump-assisted technique was effective in positioning and centering the graft accurately and in straightening infolded graft edges and smoothing out graft creases and wrinkles. Endothelial cell loss was 38.6%. Postoperative best-corrected visual acuity at 6 months was 0.66 ± 0.25 in decimal equivalent. Continuous pressurized air infusion acted as a third hand providing a continuous pressure head that supported the graft and prevented graft dislocation as well as anterior chamber collapse during intraocular maneuvering. Adequate maneuvering space was available in all cases, and bleeding, if any, was tamponaded successfully in all cases. Although very young donor grafts may be used for PDEK, they are difficult to center and unroll completely before floating against host stroma. An air pump-assisted technique using continuous pressurized air infusion allows successful final graft positioning even with very young donor corneas. It thus makes surgery easier as several key steps are made easier to handle. It additionally helps in tamponading hemorrhage during peripheral iridectomy, increasing surgical space, preventing fluctuations in the anterior chamber depth, and promoting graft adherence.

  8. Costal Grafting in Mandibular Reconstruction.

    Science.gov (United States)

    Bachelet, Jean-Thomas; Bourlet, Jerôme; Château, Joseph; Jacquemart, Mathieu; Dufour, Clémence; Mojallal, Ali; Gleizal, Arnaud

    2015-11-01

    Reconstruction of mandibular bone defect is a common indication in craniomaxillofacial surgery, and free fibular flap is the gold standard for this indication. However, there are alternatives; nonvascular bone grafting is one of them, and we present the costal grafting for mandibular reconstruction, a classic technique that is reliable, efficient, and produced less morbidity than the technique of using composite free flaps. A 9-year retrospective review of 54 patients treated surgically for mandibular reconstruction was performed. The criterion mainly analyzed was graft survival. The surgical technique was described in detail. A total of 54 patients with mandibular bone defect were identified. Five symphysis, 46 corpus, and 20 ramus defects were considered. These patients underwent reconstruction by costal grafting, and the engrafting was successful in 92.6% of cases. Dental rehabilitation with dental implants was realized in 70% of cases. The approach described in this article allowed the authors to obtain good results with costal grafting for mandibular reconstruction and dental rehabilitation. Costal grafting is a good alternative for fibula free flap in specific indications. Reconstruction of mandibular bone defect is a common indication in craniomaxillofacial surgery. Since the 1980s, the gold standard for these defects is the use of free fibular flap.(1) In some cases, this technique is contradicted; the surgeon then has several possibilities for the use of free osteomyocutaneous flaps (iliac crest, scapula, and serrato-costal flaps).(2-8).

  9. Preparation and characterization of polyurethane plasticizer for flexible packaging applications: Natural oils affirmed access

    Directory of Open Access Journals (Sweden)

    Mohammed A. Mekewi

    2017-03-01

    Full Text Available Developing bio-renewable feedstock for polyurethane (PU manufacturing and polymer industry as a whole has become highly desirable for both economic and environmental reasons. In this work castor oil (CO and palm olein (PO polyols were synthesized and partially used as renewable feedstock for the manufacturing of polyurethane plasticizing resin for printing ink applications. The chemical structure of the prepared polyols and polyurethanes were characterized using IR spectra and GPC and their solubility in common solvents was tested. As well, properties such as flexibility, mechanical properties, optical properties, heat seal and freeze resistance of these prepared printing inks were determined. The results indicated that the prepared printing inks from 50% synthesized polyurethane have high thermal stability, adhesion and excellent freeze resistance. The net technical properties of the new ink formulations are relatively comparable to the printing ink prepared from standard polyurethane plasticizer.

  10. Synthesis and Characterization of Anionic Polyester-Polyurethane Dispersion as Environmentally-Friendly Waterbased Resins

    Directory of Open Access Journals (Sweden)

    Najaf i F. Manouchehri F., and Shaabanz

    2012-01-01

    Full Text Available Aqueous polyurethane dispersions (PUDs have recently emerged as important alternatives to their solvent-based counterparts for various applications due to increasing health and environmental awareness (green chemistry. Anionic polyester-polyurethane dispersions were synthesized by three steps. In the first step, macromonomer diisocyanate having carboxylic acid was prepared by isophorone diisocyanate (IPDI, dimethylol propionic acid (DMPA in percent of acetone as solvent and dibutyldtin dilaurate (DBTDL as catalyst. Then, carboxylic polyurethane was prepared by reaction macromonomer diisocyanate having carboxylic acid with linear aliphatic polyester (Mw=2000, trifunctional polyester (Mw=2800 and butanediol (BDO as chain extender. The next step involved neutralization and dispersion in water, where acidic polyurethane was neutralized by the addition of triethylamine (TEA.  Factors influencing the synthesis of polyurethane dispersion mainly involve reaction temperature, reaction time, the concentration of catalyst, DMPA content and BDO content, were studied. The polymers have been characterized with DSC and FTIR.

  11. Experimental study of polyurethane foam reinforced soil used as a rock-like material

    Directory of Open Access Journals (Sweden)

    Eren Komurlu

    2015-10-01

    Full Text Available In this study, polyurethane foam type thermoset polymerizing, due to chemical reaction between its liquid ingredients, was tested as binder after solidifying and then a rock-like material mixing with a sandy silt type soil was prepared. The uniaxial compressive strengths (UCSs of polyurethane foam reinforced soil specimens were determined for different polyurethane ratios in the mixture. Additionally, a series of tests on slake durability, impact value, freezing–thawing resistance, and abrasion resistance of polyurethane reinforced soil (PRS mixture was conducted. The UCS values over 3 MPa were measured from the PRS specimens. The testing results showed that treated soil can economically become a desirable rock-like material in terms of slake durability and resistances against freezing–thawing, impact effect and abrasion. As another characteristic of the rock-like material made with polyurethane foam, unit volume weight was found to be quite lower than those of natural rock materials.

  12. Reflectance spectroscopy from TiO2 particles embedded in polyurethane

    DEFF Research Database (Denmark)

    Gudla, Visweswara Chakravarthy; Canulescu, Stela; Johansen, Villads Egede

    2013-01-01

    This paper presents the results of a physical simulation carried out using TiO2-Polyurethane composite coating on bright aluminium surface to understand the light scattering effect for designing white surfaces. Polyurethane matrix is selected due to the matching refractive index (1.7) with Al2O3...... layer on anodized aluminium surfaces. Three different TiO2 particle distributions were dispersed in polyurethane and spin coated onto high gloss and caustic etched aluminium substrates. Reflectance spectra of TiO2-polyurethane films of various concentrations were analysed using an integrating sphere....... The results show that the TiO2-polyurethane coatings have a high diffuse reflectance as a result of multiple scattering from TiO2 particles. Diffuse reflectance spectra of TiO2 containing films vary weakly with particle concentration and reach a steady state value at a concentration of 0.75 wt.%. Using...

  13. SPECIFIC FEATURES OF OLIGOMERIC PRODUCT SOLIDIFICATION FROM POLYURETHANE WASTES AND THEIR PRACTICAL APPLICATION

    Directory of Open Access Journals (Sweden)

    V. Belyatsky

    2012-01-01

    Full Text Available The paper considers a possibility to use secondary polyurethane obtained by  thermal depolymerization of wastes on the basis of cross-linked polyurethane (polyurethane adduct and isocyanate. An effect of density dependence of the obtained polyurethane samples on nature and quantity of solvent has been revealed and it is significantly observed while using low-boiling solvents. The influence of adduct/solidification agent ratio on mechanical hardness of the obtained samples has been studied in the paper. The paper shows that the most optimal ratio is within the following limits – from 7/1 to 10/1. Plasticizing effect of polyurethane adduct on bitumen materials has been also found in the paper.A conclusion has been made that there is a possibility of practical usage of composites in building and road-building materials. 

  14. Primary graft dysfunction.

    Science.gov (United States)

    Suzuki, Yoshikazu; Cantu, Edward; Christie, Jason D

    2013-06-01

    Primary graft dysfunction (PGD) is a syndrome encompassing a spectrum of mild to severe lung injury that occurs within the first 72 hours after lung transplantation. PGD is characterized by pulmonary edema with diffuse alveolar damage that manifests clinically as progressive hypoxemia with radiographic pulmonary infiltrates. In recent years, new knowledge has been generated on risks and mechanisms of PGD. Following ischemia and reperfusion, inflammatory and immunological injury-repair responses appear to be key controlling mechanisms. In addition, PGD has a significant impact on short- and long-term outcomes; therefore, the choice of donor organ is impacted by this potential adverse consequence. Improved methods of reducing PGD risk and efforts to safely expand the pool are being developed. Ex vivo lung perfusion is a strategy that may improve risk assessment and become a promising platform to implement treatment interventions to prevent PGD. This review details recent updates in the epidemiology, pathophysiology, molecular and genetic biomarkers, and state-of-the-art technical developments affecting PGD. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

  15. Photometry of faint blue stars

    International Nuclear Information System (INIS)

    Kilkenny, D.; Hill, P.W.; Brown, A.

    1977-01-01

    Photometry on the uvby system is given for 61 faint blue stars. The stars are classified by means of the Stromgren indices, using criteria described in a previous paper (Kilkenny and Hill (1975)). (author)

  16. Ecology of blue straggler stars

    CERN Document Server

    Carraro, Giovanni; Beccari, Giacomo

    2015-01-01

    The existence of blue straggler stars, which appear younger, hotter, and more massive than their siblings, is at odds with a simple picture of stellar evolution. Such stars should have exhausted their nuclear fuel and evolved long ago to become cooling white dwarfs. They are found to exist in globular clusters, open clusters, dwarf spheroidal galaxies of the Local Group, OB associations and as field stars. This book summarises the many advances in observational and theoretical work dedicated to blue straggler stars. Carefully edited extended contributions by well-known experts in the field cover all the relevant aspects of blue straggler stars research: Observations of blue straggler stars in their various environments; Binary stars and formation channels; Dynamics of globular clusters; Interpretation of observational data and comparison with models. The book also offers an introductory chapter on stellar evolution written by the editors of the book.

  17. Histopathological reaction over prosthesis surface covered with silicone and polyurethane foam implanted in rats.

    Science.gov (United States)

    Wagenführ-Júnior, Jorge; Ribas Filho, Jurandir Marcondes; Nascimento, Marcelo Mazza do; Ribas, Fernanda Marcondes; Wanka, Marcus Vinícius; Godoi, Andressa de Lima

    2012-12-01

    To evaluate whether polyurethane foam leads more intense foreign-body reaction than silicone foam. To compare the vascularization of the capsules surrounding the foam implants. To investigate if the capsule of polyurethane foam implanted has greater amount of collagen than that of silicone foam. Sixty-four young male Wistar rats were allocated into two groups: polyurethane foam and silicone foam. Subcutaneous discs were implanted into the dorsum of the animals in both groups. The capsules were assessed 28 days, two months, three months and six months postoperatively. Microscopic analysis with H&E stain was performed to evaluate the acute and chronic inflammatory process, foreign-body reaction and neovascularization. The analysis with picrosirius red was performed using the ImageProPlus software, to measure the number of vessels and collagen types I and III. There were no statistical differences between the two groups regarding the acute and chronic inflammatory processes. All rats from the polyurethane group, in all times, exhibited moderate or intense foreign-body reaction, with statistic significant difference (p=0.046) when compared with the silicone group, in which the reaction was either mild or nonexistent at two months. Vascular proliferation was significantly different between the groups at 28 days (p=0.0002), with the polyurethane group displaying greater neovascularization with H&E stain. Similar results were obtained with picrosirius red, which revealed in the polyurethane group a much greater number of vessels than in the silicone group (p=0.001). The collagen area was larger in the polyurethane group, significantly at 28 days (p=0.001) and at two months (p=0.030). Polyurethane foam elicited more intense foreign-body reaction when compared with silicone foam. The number of vessels was higher in the capsules of the polyurethane foam implants 28 days after the operation. The capsule of the polyurethane foam implants showed a greater amount of collagen

  18. Radiation grafting on natural films

    International Nuclear Information System (INIS)

    Lacroix, M.; Khan, R.; Senna, M.; Sharmin, N.; Salmieri, S.; Safrany, A.

    2014-01-01

    Different methods of polymer grafting using gamma irradiation are reported in the present study for the preparation of newly functionalized biodegradable films, and some important properties related to their mechanical and barrier properties are described. Biodegradable films composed of zein and poly(vinyl alcohol) (PVA) were gamma-irradiated in presence of different ratios of acrylic acid (AAc) monomer for compatibilization purpose. Resulting grafted films (zein/PVA-g-AAc) had their puncture strength (PS=37–40 N mm −1 ) and puncture deformation (PD=6.5–9.8 mm) improved for 30% and 50% PVA in blend, with 5% AAc under 20 kGy. Methylcellulose (MC)-based films were irradiated in the presence of 2-hydroxyethyl methacrylate (HEMA) or silane, in order to determine the effect of monomer grafting on the mechanical properties of films. It was found that grafted films (MC-g-HEMA and MC-g-silane) using 35% monomer performed higher mechanical properties with PS values of 282–296 N mm −1 and PD of 5.0–5.5 mm under 10 kGy. Compatibilized polycaprolactone (PCL)/chitosan composites were developed via grafting silane in chitosan films. Resulting trilayer grafted composite film (PCL/chitosan-g-silane/PCL) presented superior tensile strength (TS=22 MPa) via possible improvement of interfacial adhesion (PCL/chitosan) when using 25% silane under 10 kGy. Finally, MC-based films containing crystalline nanocellulose (CNC) as a filling agent were prepared and irradiated in presence of trimethylolpropane trimethacrylate (TMPTMA) as a grafted plasticizer. Grafted films (MC-g-TMPTMA) presented superior mechanical properties with a TS of 47.9 MPa and a tensile modulus (TM) of 1792 MPa, possibly due to high yield formation of radicals to promote TMPTMA grafting during irradiation. The addition of CNC led to an additional improvement of the barrier properties, with a significant 25% reduction of water vapor permeability (WVP) of grafted films. - Highlights: • Irradiation of zein

  19. Release of CFC-11 from disposal of polyurethane foam waste

    DEFF Research Database (Denmark)

    Kjeldsen, Peter; Jensen, M.H.

    2001-01-01

    The halocarbon CFC-11 has extensively been used as a blowing agent for polyurethane (PUR) insulation foams in home appliances and for residential and industrial construction. Release of CFCs is an important factor in the depletion of the ozone layer. For CFC-11 the future atmospheric concentrations...... will mainly depend on the continued release from PUR foams. Little is known about rates and time frames of the CFC release from foams especially after treatment and disposal of foam containing waste products. The CFC release is mainly controlled by slow diffusion out through the PUR. From the literature...

  20. Dielectric and conductivity properties of composite polyaniline/polyurethane network

    Science.gov (United States)

    Liang, C.; Gest, J.; Leroy, G.; Carru, J.-C.

    2013-09-01

    In this work, we present the dielectric characterization of polyaniline/polyurethane composite. The samples consisting of 0.5%, 1%, and 5% of polyaniline were deposited on glass fiber, and the measurements were performed in a frequency range of 20 Hz to 20 GHz. The results showed a dielectric relaxation strongly dependent on the concentration of polyaniline. This phenomenon is explained by a theoretical model. In this model, we assume that the alternative conductivity of the polymer network systems is due to conducting clusters whose lengths followed a Gaussian distribution. Depending on their size and the frequency of the excitation signal, the clusters showed a resistive or capacitive effect.

  1. Method for providing a low density high strength polyurethane foam

    Science.gov (United States)

    Whinnery, Jr., Leroy L.; Goods, Steven H.; Skala, Dawn M.; Henderson, Craig C.; Keifer, Patrick N.

    2013-06-18

    Disclosed is a method for making a polyurethane closed-cell foam material exhibiting a bulk density below 4 lbs/ft.sup.3 and high strength. The present embodiment uses the reaction product of a modified MDI and a sucrose/glycerine based polyether polyol resin wherein a small measured quantity of the polyol resin is "pre-reacted" with a larger quantity of the isocyanate in a defined ratio such that when the necessary remaining quantity of the polyol resin is added to the "pre-reacted" resin together with a tertiary amine catalyst and water as a blowing agent, the polymerization proceeds slowly enough to provide a stable foam body.

  2. Electron beam curing polyurethane acrylate oligomer in air

    International Nuclear Information System (INIS)

    Zhu, Zhenkang; Chen, Xing; Zhou, Jichun; Ma, Zue-Teh

    1988-01-01

    It has been found according to our synthesis that a novel kind of polyurethane acrylate oligomer can be cured by electron beam in the presence of oxygen, even at normal atomospheric levels, without any additives. Irradiation of the oligomer with substantially complete cure to a solid non-tacky state is quite remarkable. It has the same gel content (90 %) in air as in nitrogen at dose of 33 kGy. Double bond conversion of the oligomer is about 50 % by I.R. (author)

  3. Investigation of Industrial Polyurethane Foams Modified with Antimicrobial Copper Nanoparticles

    Directory of Open Access Journals (Sweden)

    Maria Chiara Sportelli

    2016-07-01

    Full Text Available Antimicrobial copper nanoparticles (CuNPs were electrosynthetized and applied to the controlled impregnation of industrial polyurethane foams used as padding in the textile production or as filters for air conditioning systems. CuNP-modified materials were investigated and characterized morphologically and spectroscopically, by means of Transmission Electron Microscopy (TEM, and X-ray Photoelectron Spectroscopy (XPS. The release of copper ions in solution was studied by Electro-Thermal Atomic Absorption Spectroscopy (ETAAS. Finally, the antimicrobial activity of freshly prepared, as well as aged samples—stored for two months—was demonstrated towards different target microorganisms.

  4. Solid particle erosion and viscoelastic properties of thermoplastic polyurethanes

    Directory of Open Access Journals (Sweden)

    G. Arena

    2015-03-01

    Full Text Available The wear resistance of several thermoplastic polyurethanes (TPUs having different chemical nature and micronscale arrangement of the hard and soft segments has been investigated by means of erosion and abrasion tests. The goal was correlating the erosion performances of the materials to their macroscopic mechanical properties. Unlike conventional tests, such as hardness and tensile measurements, viscoelastic analysis proved to be a valuable tool to study the erosion resistance of TPUs. In particular, a strict correlation was found between the erosion rate and the high-frequency (~107 Hz loss modulus. The latter reflects the actual ability of TPU to dissipate the impact energy of the erodent particles.

  5. Thermomechanical properties of polyurethane shape-memory polymer foam

    Energy Technology Data Exchange (ETDEWEB)

    Tobushi, H.; Okumura, K.; Endo, M. [Aichi Inst. of Tech., Toyota (Japan). Dept. of Mechanical Engineering; Hayashi, S. [Mitsubishi Heavy Industries Ltd., Nagoya (Japan). Nagoya Research and Development Center

    2002-07-01

    The thermomechanical properties of polyurethane-shape memory polymer foam were investigated by the compression tests. The results are summarized as follows. (1) The material contracts uniformly in the axial direction with the ratio of lateral strain to axial strain 0.4 in the early stage but about 0.15 thereafter. (2) The deformation resistance is large at low temperature and at high strain rate. (3) In the case of thermomechanical loading, strain is recovered at temperatures in the vicinity of T{sub g}. The rate of strain recovery is 99%. The rate of strain fixity is 100%. (orig.)

  6. [POSSIBILITIES OF VACUUM THERAPY APPLICATION IN DISORDERS OF VENOUS OUTFLOW IN ISLET GRAFTS].

    Science.gov (United States)

    Badyul, P O; Samoylenko, G E; Nor, N M; Slesarenko, K S

    2015-07-01

    The experience of "distressed" (problematic) flaps application in 33 patients with soft tissue defects over 2010-2014 years were analysed. It was proposed to use the local negative pressure for the prevention and treatment of complications associated with venous insufficiency or trombosis in using of plastics with vascularised complexes of tissues. Vacuum-therapy was conducted with the help of negative pressure apparatus "AGATE-Dnepr" (Ukraine) by attaching silver-containing polyurethane sponge on the operating zone, covering the flap with the surrounding skin netting band "Grassolind". The recommended standard of negative pressure of 75-125 mm Hg, both in impulse and in continuous mode was used. The high efficiency of vacuum-therapy for survival of grafts has been demonstrated. Thus, it might be considered as an effective element of prevention and treatment of complications associated with venous insufficiency or trombosis using of vascularised tissue complex plastics of defects.

  7. Visible-light-induced surface graft polymerization via camphorquinone impregnation technique.

    Science.gov (United States)

    Ziani-Cherif, Houcine; Abe, Yusuke; Imachi, Kou; Matsuda, Takehisa

    2002-02-01

    A surface modification method that is particularly applicable to complexly shaped fabricated devices has long been awaited. In this article, we describe the visible-light-induced surface photograft polymerization technique by which an inner surface of the device is modified by visible-light irradiation through the external surface. Comphorquione, as a photoradical initiator, was impregnated on a segmented polyurethane surface by solvent soaking, followed by visible-light irradiation in the presence of monomers such as acrylamide and poly(ethylene glycol) methacrylate. The resultant surfaces were highly wettable with water, and surface chemical compositional analysis by X-ray photoelectron spectroscopy revealed that the surface was graft-polymerized with these monomers. The simple and widespread applicability of this surface modification technique to biomedical devices is discussed. Copyright 2001 John Wiley & Sons, Inc. J Biomed Mater Res 59: 386-389, 2002

  8. [Acute blue urticaria following subcutaneous injection of patent blue dye].

    Science.gov (United States)

    Hamelin, A; Vial-Dupuy, A; Lebrun-Vignes, B; Francès, C; Soria, A; Barete, S

    2015-11-01

    Patent blue (PB) is a lymphatic vessel dye commonly used in France for sentinel lymph node detection in breast cancer, and less frequently in melanoma, and which may induce hypersensitivity reactions. We report a case of acute blue urticaria occurring within minutes of PB injection. Ten minutes after PB injection for sentinel lymph node detection during breast cancer surgery, a 49-year-old woman developed generalised acute blue urticaria and eyelid angioedema without bronchospasm or haemodynamic disturbance, but requiring discontinuation of surgery. Skin testing using PB and the anaesthetics given were run 6 weeks after the episode and confirmed PB allergy. PB was formally contra-indicated. Immediate hypersensitivity reactions to PB have been reported for between 0.24 and 2.2% of procedures. Such reactions are on occasion severe, chiefly involving anaphylactic shock. Two mechanisms are probably associated: non-specific histamine release and/or an IgE-mediated mechanism. Skin tests are helpful in confirming the diagnosis of PB allergy. Blue acute urticaria is one of the clinical manifestations of immediate hypersensitivity reactions to patent blue dye. Skin tests must be performed 6 weeks after the reaction in order to confirm the diagnosis and formally contra-indicate this substance. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

  9. Protein adsorption resistance of PVP-modified polyurethane film prepared by surface-initiated atom transfer radical polymerization

    Energy Technology Data Exchange (ETDEWEB)

    Yuan, Huihui; Qian, Bin; Zhang, Wei [Shanghai Key Laboratory of Functional Materials Chemistry and Research Center of Analysis and Test, East China University of Science and Technology, Shanghai 200237 (China); Lan, Minbo, E-mail: minbolan@ecust.edu.cn [Shanghai Key Laboratory of Functional Materials Chemistry and Research Center of Analysis and Test, East China University of Science and Technology, Shanghai 200237 (China); State Key Laboratory of Bioreactor Engineering, East China University of Science and Technology, Shanghai 200237 (China)

    2016-02-15

    Highlights: • Antifouling PVP brushes were successfully grafted on PU films by SI-ATRP. • The effect of polymerization time on surface property and topography was studied. • Hydrophilicity and protein fouling resistance of PVP–PU films were greatly promoted. • Competitive adsorption of three proteins on PVP–PU films was evaluated. - Abstract: An anti-fouling surface of polyurethane (PU) film grafted with Poly(N-vinylpyrrolidone) (PVP) was prepared through surface-initiated atom transfer radical polymerization (SI-ATRP). And the polymerization time was investigated to obtain PU films with PVP brushes of different lengths. The surface properties and protein adsorption of modified PU films were evaluated. The results showed that the hydrophilicity of PU–PVP films were improved with the increase of polymerization time, which was not positive correlation with the surface roughness due to the brush structure. Additionally, the protein resistance performance was promoted when prolonging the polymerization time. The best antifouling PU–PVP (6.0 h) film reduced the adsoption level of bovine serum albumin (BSA), lysozyme (LYS), and brovin serum fibrinogen (BFG) by 93.4%, 68.3%, 85.6%, respectively, compared to the unmodified PU film. The competitive adsorption of three proteins indicated that LYS preferentially adsorbed on the modified PU film, while BFG had the lowest adsorption selectivity. And the amount of BFG on PU–PVP (6.0 h) film reduced greatly to 0.08 μg/cm{sup 2}, which was almost one-tenth of its adsorption from the single-protein system. Presented results suggested that both hydrophilicity and surface roughness might be the important factors in all cases of protein adsorption, and the competitive or selective adsorption might be related to the size of the proteins, especially on the non-charged films.

  10. Grafting titanium nitride surfaces with sodium styrene sulfonate thin films

    Science.gov (United States)

    Zorn, Gilad; Migonney, Véronique; Castner, David G.

    2014-01-01

    The importance of titanium nitride lies in its high hardness and its remarkable resistance to wear and corrosion, which has led to its use as a coating for the heads of hip prostheses, dental implants and dental surgery tools. However, the usefulness of titanium nitride coatings for biomedical applications could be significantly enhanced by modifying their surface with a bioactive polymer film. The main focus of the present work was to graft a bioactive poly(sodium styrene sulfonate) (pNaSS) thin film from titanium nitride surfaces via a two-step procedure: first modifying the surface with 3-methacryloxypropyltrimethoxysilane (MPS) and then grafting the pNaSS film from the MPS modified titanium through free radical polymerization. X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) were used after each step to characterize success and completeness of each reaction. The surface region of the titanium nitride prior to MPS functionalization and NaSS grafting contained a mixture of titanium nitride, oxy-nitride, oxide species as well as adventitious surface contaminants. After MPS functionalization, Si was detected by XPS, and characteristic MPS fragments were detected by ToF-SIMS. After NaSS grafting, Na and S were detected by XPS and characteristic NaSS fragments were detected by ToF-SIMS. The XPS determined thicknesses of the MPS and NaSS overlayers were ∼1.5 and ∼1.7 nm, respectively. The pNaSS film density was estimated by the toluidine blue colorimetric assay to be 260 ± 70 ng/cm2. PMID:25280842

  11. Results of Infrainguinal Bypass with a Composite Graft Combining Polytetrafluoroethylene and Vein Graft in Absence of Appropriate Saphenous Vein Graft.

    Science.gov (United States)

    Jin, Myung Jae; Park, Ui Jun; Kim, Hyoung Tae; Roh, Young-Nam

    2017-06-01

    Use of a composite graft combining a polytetrafluoroethylene graft with an autogenous vein is an option for limb salvage in the absence of an adequate single segment vein graft. We aimed to investigate the results of infrainguinal bypass with a composite graft. We retrospectively reviewed 11 infrainguinal arterial bypasses on 11 limbs which underwent surgery from March 2012 to November 2016. Critical limb ischemia was common (63.6%) indication of bypass surgery and most (90.9%) of the patients had history of failed previous treatment including endovascular treatment (36.4%) and bypass surgery (72.7%). At the 2 years after graft implantations, primary patency and amputation-free survival of below-knee bypasses using composite graft were 73% and 76%, respectively. Infrainguinal arterial bypasses with composite graft had an acceptable patency. In patients without other alternative conduits for revascularization, bypass with a composite graft can be an option.

  12. Preparation and Characterization of Liquid Crystalline Polyurethane/Al2O3/Epoxy Resin Composites for Electronic Packaging

    Directory of Open Access Journals (Sweden)

    Shaorong Lu

    2012-01-01

    Full Text Available Liquid crystalline polyurethane (LCPU/Al2O3/epoxy resin composites were prepared by using LCPU as modifier. The mechanical properties, thermal stability, and electrical properties of the LCPU/Al2O3/epoxy resin composites were investigated systematically. The thermal oxidation analysis indicated that LCPU/Al2O3/epoxy resin composites can sustain higher thermal decomposition temperature. Meanwhile, coefficient of thermal expansion (CTE was also found to decrease with addition of LCPU and nano-Al2O3.

  13. Biomaterial based novel polyurethane adhesives for wood to wood and metal to metal bonding

    Directory of Open Access Journals (Sweden)

    Mitesh Ramanlal Patel

    2009-01-01

    Full Text Available Polyurethane adhesives made from synthetic chemicals are non-biodegradable, costly and difficult to find raw materials from local market. To avoid solid pollution problem, cost effectiveness and easy availability of raw materials, biomaterials based polyurethane adhesives are used in current industrial interest. Direct use of castor oil in polyurethane adhesive gives limited hardness. Modification on active sites of castor oil to utilize double bond of unsaturated fatty acid and carboxyl group yields new modified or activated polyols, which can be utilized for polyurethane adhesive formulation. In view of this, we have synthesized polyurethane adhesives from polyester polyols, castor oil based polyols and epoxy based polyols with Isocyanate adducts based on castor oil and trimethylolpropane. To study the effects of polyurethane adhesive strength (i.e. lap shear strength on wood-to-wood and metal-to-metal bonding through various types of polyols, cross-linking density, isocyanate adducts and also to compare adhesive strength between wood to wood and metal to metal surface. These polyols and polyurethanes were characterized through GPC, NMR and IR-spectroscopy, gel and surface drying time. Thermal stability of PU adhesives was determined under the effect of cross-linking density (NCO/OH ratio. The NCO/OH ratio (1.5 was optimized for adhesives as the higher NCO/OH ratio (2.0 increasing cross-linking density and decreases adhesion. Lower NCO/OH ratio (1.0 provideslow cross-linking density and low strength of adhesives.

  14. Plant grafting: new mechanisms, evolutionary implications

    Directory of Open Access Journals (Sweden)

    Eliezer E Goldschmidt

    2014-12-01

    Full Text Available Grafting, an old plant propagation practice, is still widely used with fruit trees and in recent decades also with vegetables. Taxonomic proximity is a general prerequisite for successful graft-take and long-term survival of the grafted, composite plant. However, the mechanisms underlying interspecific graft incompatibility are as yet insufficiently understood. Hormonal signals, auxin in particular, are believed to play an important role in the wound healing and vascular regeneration within the graft union zone. Long-distance protein, mRNA and small RNA graft-transmissible signals currently emerge as novel mechanisms which regulate nutritional and developmental root/top relations and may play a pivotal role in grafting physiology. Grafting also has significant pathogenic projections. On one hand, stock to scion mechanical contact enables the spread of diseases, even without a complete graft union. But, on the other hand, grafting onto resistant rootstocks serves as a principal tool in the management of fruit tree plagues and vegetable soil-borne diseases. The ‘graft hybrid’ historic controversy has not yet been resolved. Recent evidence suggests that epigenetic modification of DNA-methylation patterns may account for certain graft-transformation phenomena. Root grafting is a wide spread natural phenomenon; both intraspecific and interspecific root grafts have been recorded. Root grafts have an evolutionary role in the survival of storm-hit forest stands as well as in the spread of devastating diseases. A more fundamental evolutionary role is hinted by recent findings that demonstrate plastid and nuclear genome transfer between distinct Nicotiana species in the graft union zone, within a tissue culture system. This has led to the formation of alloploid cells that, under laboratory conditions, gave rise to a novel, alloploid Nicotiana species, indicating that natural grafts may play a role in plant speciation. under certain circumstances.

  15. Plant grafting: new mechanisms, evolutionary implications.

    Science.gov (United States)

    Goldschmidt, Eliezer E

    2014-01-01

    Grafting, an old plant propagation practice, is still widely used with fruit trees and in recent decades also with vegetables. Taxonomic proximity is a general prerequisite for successful graft-take and long-term survival of the grafted, composite plant. However, the mechanisms underlying interspecific graft incompatibility are as yet insufficiently understood. Hormonal signals, auxin in particular, are believed to play an important role in the wound healing and vascular regeneration within the graft union zone. Incomplete and convoluted vascular connections impede the vital upward and downward whole plant transfer routes. Long-distance protein, mRNA and small RNA graft-transmissible signals currently emerge as novel mechanisms which regulate nutritional and developmental root/top relations and may play a pivotal role in grafting physiology. Grafting also has significant pathogenic projections. On one hand, stock to scion mechanical contact enables the spread of diseases, even without a complete graft union. But, on the other hand, grafting onto resistant rootstocks serves as a principal tool in the management of fruit tree plagues and vegetable soil-borne diseases. The 'graft hybrid' historic controversy has not yet been resolved. Recent evidence suggests that epigenetic modification of DNA-methylation patterns may account for certain graft-transformation phenomena. Root grafting is a wide spread natural phenomenon; both intraspecific and interspecific root grafts have been recorded. Root grafts have an evolutionary role in the survival of storm-hit forest stands as well as in the spread of devastating diseases. A more fundamental evolutionary role is hinted by recent findings that demonstrate plastid and nuclear genome transfer between distinct Nicotiana species in the graft union zone, within a tissue culture system. This has led to the formation of alloploid cells that, under laboratory conditions, gave rise to a novel, alloploid Nicotiana species, indicating

  16. Polymeric Endoaortic Paving (PEAP): Mechanical, Thermoforming, and Degradation Properties of Polycaprolactone/Polyurethane Blends for Cardiovascular Applications

    Science.gov (United States)

    Ashton, John H.; Mertz, James A. M.; Harper, John L.; Slepian, Marvin J.; Mills, Joseph L.; McGrath, Dominic V.; Vande Geest, Jonathan P.

    2010-01-01

    Polymeric endoaortic paving (PEAP) is a process by which a polymer is endovascularly delivered and thermoformed to coat or “pave” the lumen of the aorta. This method may offer an improvement to conventional endoaortic therapy in allowing conformal graft application with reduced risk of endoleak and customization to complex patient geometries. Polycaprolactone (PCL)/polyurethane (PU) blends of various blend ratios were assessed as a potential material for PEAP by characterizing their mechanical, thermoforming, and degradation properties. Biaxial tension testing revealed that the blends' stiffness is similar to that of aortic tissue, is higher for blends with more PCL content, and may be affected by thermoforming and degradation. Tubes of blends were able to maintain a higher diameter increase after thermoforming at higher PCL content and higher heating temperatures; 50/50 blend tubes heated to 55°C were able to maintain 90% of the diameter increase applied. Delamination forces of the blends ranged from 41 to 235 N/m2. In a Pseudomonas lipase solution, the 50/50 blend had a 94% lower degradation rate than pure PCL, and the 10/90 blend exhibited no degradation. These results indicate that PEAP, consisting of a PCL/PU blend, may be useful in developing the next generation of endoaortic therapy. PMID:20832506

  17. Vascularized osseous graft for scaphoid

    International Nuclear Information System (INIS)

    Mendez Daza, Carlos Hernan; Mathoulin, Cristophe

    2004-01-01

    The most commonly used technique for treatment of pseudo-arthrosis of the scaphoid is osteo-synthesis with Kirschnet wires and cortical sponge grafts. Results reported by different teams using this procedure show no more than 90% osseous consolidation, especially in cases where vascularisation of the proximal fragment of the scaphoid is compromised. Here we present a series of ten cases of pseudo-arthrosis of the scaphoid, treated using a new surgical technique involving a vascularized osseous graft of the distal radius. Using this procedure we obtained 100% consolidation, with no complications either during the procedure or immediately post-operatively. Patients returned to work in week 15 on average. In 4 cases we observed discomfort in the area of the scar, which was successfully treated using local cortisone injection. The results obtained are very similar to those seen in the literature on the different techniques for vascularized osseous grafts for pseudo-arthrosis of the scaphoid

  18. Comparison of polyurethane with cyanoacrylate in hemostasis of vascular injury in guinea pigs

    Directory of Open Access Journals (Sweden)

    Luiz Fernando Kubrusly

    2015-02-01

    Full Text Available Objective: To evaluate the behavior of castor oil-derived polyurethane as a hemostatic agent and tissue response after abdominal aortic injury and to compare it with 2-octyl-cyanoacrylate. Methods: Twenty-four Guinea Pigs were randomly divided into three groups of eight animals (I, II, and III. The infrarenal abdominal aorta was dissected, clamped proximally and distally to the vascular puncture site. In group I (control, hemostasis was achieved with digital pressure; in group II (polyurethane castor oil-derived polyurethane was applied, and in group III (cyanoacrylate, 2-octyl-cyanoacrylate was used. Group II was subdivided into IIA and IIB according to the time of preparation of the hemostatic agent. Results: Mean blood loss in groups IIA, IIB and III was 0.002 grams (g, 0.008 g, and 0.170 g, with standard deviation of 0.005 g, 0.005 g, and 0.424 g, respectively (P=0.069. The drying time for cyanoacrylate averaged 81.5 seconds (s (standard deviation: 51.5 seconds and 126.1 s (standard deviation: 23.0 s for polyurethane B (P=0.046. However, there was a trend (P=0.069 for cyanoacrylate to dry more slowly than polyurethane A (mean: 40.5 s; SD: 8.6 s. Furthermore, polyurethane A had a shorter drying time than polyurethane B (P=0.003, mean IIA of 40.5 s (standard deviation: 8.6 s. In group III, 100% of the animals had mild/severe fibrosis, while in group II only 12.5% showed this degree of fibrosis (P=0.001. Conclusion: Polyurethane derived from castor oil showed similar hemostatic behavior to octyl-2-cyanoacrylate. There was less perivascular tissue response with polyurethane when compared with cyanoacrylate.

  19. Preparation and characterization of polyurethane microcapsules containing functional oil

    Energy Technology Data Exchange (ETDEWEB)

    Kim, I.H.; Seo, J.B.; Kim, Y.J. [Sungkyunkwan University, Suwon (Korea)

    2002-05-01

    Polyurethane microcapsules containing functional oil (citronella oil) were successfully prepared by conventional interfacial polymerization of tolulene 2,4-diisocyanate (TDI) and ethylene glycol (EG) and characterized by Fourier transform (FT-IR) spectroscopy, Ultraviolet spectroscopy, particle size analysis, thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). The effects of polymerization variables such as surfactant concentration and agitation speed, on the particle size and particle size distribution were investigated. FT-IR spectroscopic data showed that citronella oil was successfully encapsulated in the microcapsule. Thermogravimetric analysis data showed that the microcapsule was thermally stable up to 220 deg. C. The controlled release of the citronella oil present in the microcapsule core in a methanol medium was demonstrated by ultraviolet spectroscopy, showing that the amount of released citronella oil was increased with increasing time. It was observed that the amount of released citronella oil was increased with increasing stirring speed and emulsifier concentration in the microcapsule preparation step. Polyurethane microcapsules containing citronella oil showed excellent anti-moth property. (author). 28 refs., 1 tab., 12 figs.

  20. Corrosion Prevention of Aluminum Nanoparticles by a Polyurethane Coating.

    Science.gov (United States)

    Nishimura, Toshiyasu; Raman, Vedarajan

    2014-06-19

    In order to prevent corrosion, aluminum nanoparticles were coated with a polyurethane polymer. The coverage of the polyurethane polymer was controlled from 0 to 100%, which changed the corrosion rate of the nanoparticles quantitatively. The surface of the polymer coating was investigated by Transmission Electron Microscopy (TEM) and Atomic Force Microscopy (AFM), and the corrosion resistance of the nanoparticles was estimated by a wet/dry corrosion test on a Pt plate with a NaCl solution. From a TEM with EDAX analysis, the 10 mass% polymer coated Al particles in the synthesis were almost 100% covered on the surface by a polymer film of 10 nm thick. On the other hand, the 3 mass% polymer coated Al was almost 40% covered by a film. In the AFM, the potential around the Al particles had a relatively low value with the polymer coating, which indicated that the conductivity of the Al was isolated from the Pt plate by the polymer. Both the corrosion and H₂ evolution reaction rates were quantitatively reduced by the mass% of polymer coating. In the case of the 10 mass% coated sample, there was no corrosion of Al nanoparticles. This fact suggested that the electrochemical reaction was suppressed by the polymer coating. Moreover, the reaction rate of Al nanoparticles was suppressed in proportion to the coverage percentage of the coating. Thus, to conclude, it was found that the corrosion rate of Al nanoparticles could be quantitatively suppressed by the coverage percentage of the polymer coating.

  1. Thermal assault and polyurethane foam-evaluating protective mechanisms

    International Nuclear Information System (INIS)

    Williamson, C.L.; Iams, Z.L.

    2004-01-01

    Rigid polyurethane foam utilizes a variety of mechanisms to mitigate the thermal assault of a ''regulatory burn''. Polymer specific heat and foam k-factor are of limited usefulness in predicting payload protection. Properly formulated rigid polyurethane foam provides additional safeguards by employing ablative mechanisms which are effective even when the foam has been crushed or fractured as a result of trauma. The dissociative transitions from polymer to gas and char, and the gas transport of heat from inside the package out into the environment are also thermal mitigators. Additionally, the in-situ production of an intumescent, insulative, carbonaceous char, confers thermal protection even when a package's outer steel skin has been breached. In this test program, 19 liter, ''Five gallon'' steel pails are exposed on one end to the flame of an ''Oil Burner'' as described in the US Federal Aviation Administration (FAA) ''Aircraft Materials Fire Test Handbook''. When burning 2 diesel at a nominal rate of 8.39 kg (18.5 pounds)/hr, the burner generates a high emissivity flame that impinges on the pail face with the thermal intensity of a full scale pool-fire environment. Results of these tests, TGA and MDSC analysis on the subject foams are reported, and their relevance to full size packages and pool fires are discussed

  2. Study of Polyurethane Foaming Dynamics Using a Heat Flow Meter

    Science.gov (United States)

    Koniorczyk, P.; Trzyna, M.; Zmywaczyk, J.; Zygmunt, B.; Preiskorn, M.

    2017-05-01

    This work presents the results of the study concerning the effects of fillers addition on the heat flux density \\dot{q}( t ) of foaming of polyurethane-polystyrene porous composite (PSUR) and describes the dynamics of this process during the first 600 s. This foaming process resulted in obtaining porous materials that were based on HFC 365/225 blown rigid polyurethane foam (PUR) matrix, which contained thermoplastic expandable polystyrene (EPS) beads as the filler. In PSUR composites, the EPS beads were expanded after being heated to a temperature above the glass transition temperature of EPS and vaporing gas incorporated inside, by using the heat of exothermic reaction of polyol with isocyanate. From the start (t=0) to the end of the PSUR composite foaming process (t=tk), \\dot{q}( t ) was measured with the use of the heat flow meter. For the purpose of the study two PUR systems were selected: one with high and one with low heat density of foaming process q. EPS beads were selected from the same manufacturer with large and small diameter. The mass fraction of EPS in PSUR foam varied during the measurements. Additionally, a study of volume fractions of expanded EPS phase in PSUR foams as a function of mass fractions of EPS was conducted. In order to verify effects of the EPS addition on the heat flux density during PSUR foaming process, the thermal conductivity measurements were taken.

  3. Corrosion Prevention of Aluminum Nanoparticles by a Polyurethane Coating

    Directory of Open Access Journals (Sweden)

    Toshiyasu Nishimura

    2014-06-01

    Full Text Available In order to prevent corrosion, aluminum nanoparticles were coated with a polyurethane polymer. The coverage of the polyurethane polymer was controlled from 0 to 100%, which changed the corrosion rate of the nanoparticles quantitatively. The surface of the polymer coating was investigated by Transmission Electron Microscopy (TEM and Atomic Force Microscopy (AFM, and the corrosion resistance of the nanoparticles was estimated by a wet/dry corrosion test on a Pt plate with a NaCl solution. From a TEM with EDAX analysis, the 10 mass% polymer coated Al particles in the synthesis were almost 100% covered on the surface by a polymer film of 10 nm thick. On the other hand, the 3 mass% polymer coated Al was almost 40% covered by a film. In the AFM, the potential around the Al particles had a relatively low value with the polymer coating, which indicated that the conductivity of the Al was isolated from the Pt plate by the polymer. Both the corrosion and H2 evolution reaction rates were quantitatively reduced by the mass% of polymer coating. In the case of the 10 mass% coated sample, there was no corrosion of Al nanoparticles. This fact suggested that the electrochemical reaction was suppressed by the polymer coating. Moreover, the reaction rate of Al nanoparticles was suppressed in proportion to the coverage percentage of the coating. Thus, to conclude, it was found that the corrosion rate of Al nanoparticles could be quantitatively suppressed by the coverage percentage of the polymer coating.

  4. Microstructure Changes in Polyester Polyurethane upon Thermal and Humid Aging

    Directory of Open Access Journals (Sweden)

    Qiang Tian

    2016-05-01

    Full Text Available The microstructure of compression molded Estane 5703 films exposed to 11%, 45%, and 80% relative humidity and 70 °C for 1 and 2 months has been studied by small-angle neutron scattering (SANS, Fourier transform infrared spectroscopy (FTIR, gel permeation chromatography (GPC, and differential scanning calorimetry (DSC. Scattering data indicated increase of the interdomain distance and domain size with a higher humidity and longer aging time. GPC data showed a progressive shortening of polyurethane chains with increasing humidity and aging time. The shortening of the polyurethane chains caused a drop of the glass transition temperature of soft segments, and promoted crystallization of the soft segments during long-time storage of the aged samples at room temperature. FTIR showed a substantial increase in the number of inter-urethane H-bonds in the aged samples. This correlates with the increase of the hard domain size and the degree of phase separation as measured by SANS. The data collected reveals that the reduced steric hindrance caused by hydrolysis of ester links in polybutylene adipate residues promotes the organization of hard segments into domains, leading to the increase of domain size and distance, as well as phase segregation in aged Estane. These findings provide insight into the effects of humidity and thermal aging on the microstructure of aged polyester urethane from molecular to nanoscale level.

  5. Effect of the ionizing radiation in polyurethane of medical grade

    International Nuclear Information System (INIS)

    Ceron, P.; Rivera, T.; Calderon, J. A.; Paredes, L.

    2011-10-01

    The polyurethane is a material broadly used in implant medical devices, such as the connection blocks of the pacemakers and the insulator of the electrodes. Some patients that are users of these devices possibly have the necessity to receive external radiotherapy. For that reason is necessary to know the effects induced by the ionizing radiation in this polymer. In this study samples of Pellethane 2363 80a (thermoplastic polyurethane of medical grade) were irradiated. It was used the same energy and absorbed dose of a treatment of external radiotherapy in pelvis, by means of a linear accelerator of X-rays of 6 MeV and absorbed dose of 60 Gy to isocenter. The irradiation corresponding to the gamma sterilization of the material was reproduced (1, 5, 7.5, 10 and 25 kGy for the Co 60) the effects induced by the radiotherapy and for the sterilization in the material were studied by means of an analysis of the chemical connection, the molecular structure and identification of the functional groups of the polymer, by means of the infrared spectroscopy by Fourier transform in the infrared half region. (Author)

  6. Crosslinked Radiation-Grafted Films

    Energy Technology Data Exchange (ETDEWEB)

    Slaski, M.; Brack, H.P.; Fischer, D. [Zuercher Hochschule Winterthur (Switzerland); Peter, G. [Zuercher Hochschule Winterthur (Switzerland); Wokaun, A.; Scherer, G.G.

    2004-03-01

    Radiation-grafted membranes prepared by using styrene (S) and divinyl benzene (DVB) as graft components and subsequent sulfonation can be applied as solid polymer electrolytes in fuel cells and other electrochemical devices. The use of DVB as crosslinker has an important influence on the ex-situ properties like swelling, ionic resistivity, mechanical properties, surface energy, and oxidative stability. DVB also influences gas crossover, polarization performance, and lifetime in the fuel cell application. In spite of this importance, the actual DVB content and its extent of reaction has not been well investigated. (author)

  7. Morphological observation and microbial population dynamics in anaerobic polyurethane foam biofilm degrading gelatin

    Directory of Open Access Journals (Sweden)

    Tommaso G.

    2002-01-01

    Full Text Available This work reports on a preliminary study of anaerobic degradation of gelatin with emphasis on the development of the proteolytic biofilm in polyurethane foam matrices in differential reactors. The evolution of the biofilm was observed during 22 days by optical and scanning electron microscopy (SEM analyses. Three distinct immobilization patterns could be observed in the polyurethane foam: cell aggregates entrapped in matrix pores, thin biofilms attached to inner polyurethane foam surfaces and individual cells that have adhered to the support. Rods, cocci and vibrios were observed as the predominant morphologies of bacterial cells. Methane was produced mainly by hydrogenothrophic reactions during the operation of the reactors.

  8. Preparation and Characterization of Soybean Oil-Based Polyurethanes for Digital Doming Applications

    Directory of Open Access Journals (Sweden)

    Vincenzo Pantone

    2017-07-01

    Full Text Available Polyurethane-resin doming is currently one of the fastest growing markets in the field of industrial graphics and product identification. Semi-rigid bio-based polyurethanes were prepared deriving from soybean oil as a valuable alternative to fossil materials for digital doming and applied to digital mosaic technology. Bio-resins produced can favorably compete with the analogous fossil polymers, giving high-quality surface coatings (ascertained by SEM analyses. In addition, polyurethane synthesis was accomplished by using a mercury- and tin-free catalyst (the commercially available zinc derivative K22 bringing significant benefits in terms of cost efficiency and eco-sustainability.

  9. Polyurethane Microstructures--a Good or Bad in vitro Partner for the Isoflavone Genistein?

    Science.gov (United States)

    Danciu, Corina; Borcan, Florin; Soica, Codruta; Zupko, Istvan; Csányi, Erzsébet; Ambrus, Rita; Muntean, Delia; Sass, Camelia; Antal, Diana; Toma, Claudia; Dehelean, Cristina

    2015-06-01

    In recent years polyurethane microstructures (PM) have gained increasing attention in the pharmaceutical field due to the importance of their practical application. Since finding that such a formulation with genistein could improve its applications, we have conducted a preliminary study regarding the in vitro antiproliferative (MCF7, MDA-MB-231 and T47D) and antimicrobial (Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, Salmonella enteritidis (D), Bacillus subtilis, B. cereus, and Candida albicans) activity in order to test whether polyurethane micro structuresre present a good option for further modulation of genistein's bioavailability. It was concluded that the polyurethane micro structures are a bad in vitro partner for the isoflavone genistein.

  10. Comparison between Properties of Polyurethane Nanocomposites Prepared by Two Different Methods

    Directory of Open Access Journals (Sweden)

    M. Barmar

    2008-12-01

    Full Text Available In this work, a thermoplastic polyurethane elastomer (TPUE model based on polytetramethylene glycol, toluene diisocyanate and 1,4-butanediol was selected and synthesized. According to this model two types of polyurethane nanocomposites were prepared by in situ polymerization and melt intercalation procedures. The organo-modified nanoclay was used in nanocomposites samples in 0.4 weight percent level. The prepared nanocomposites were studied by WAXD, tensile and thermal analysis. Thermal properties of the nanocomposites were higher than those of pure polyurethane elastomers. Nanocomposites prepared via melt intercalation method showed a lower tensile strength and hardness than those prepared through in situ polymerization method..

  11. Synergization of silicone with developed crosslinking to soy-based polyurethane foam matrix

    Science.gov (United States)

    Elvistia Firdaus, Flora

    2014-06-01

    Flexible polyurethane foam obtained from reaction of soybased polyol with TDI:MDI (80:20), and surfactant. The goal of this research is to determine the synergization effect of silicone with low molecular alcohols; methanol and ethylene glycol (EG) in soy-polyurethane formula on holding moisture of foams to density, foam solutions capacity, and cellular morphology. The optimized of polyol was achieved by ratio of epoxide/methanol 1:6 (mol/mol), and epoxide/EG 1:3 (mol/mol). It was found silicone surfactant can minimize solution absorbency in polyurethane foam matrix.

  12. Reconstruction of mandible with pedicle bone grafts.

    Science.gov (United States)

    Kowalik, S

    1980-02-01

    Three cases of pedicle bone grafts used to reconstruct the mandible are presented. The grafts were taken from the shoulder blade, rib and clavicle. In two patients partial and in one patient total mandibles were reconstructed. Good results were obtained.

  13. Blue-emitting laser diodes

    Science.gov (United States)

    Nakano, K.; Ishibashi, A.

    This paper reviews the recent results of blue-emitting laser diodes. These devices are based on ZnMgSSe alloy II-VI semiconductors. Recently we have achieved room temperature continuous-wave operation of ZnMgSSe blue lasers for the first time. ZnMgSSe alloys offer a wide range of band-gap energy from 2.8 to 4.5 eV, while maintaining lattice matching to GaAs substrates. These characteristics make ZnMgSSe suitable for cladding layers of blue lasers. In this article, the feasibilities of ZnMgSSe will be reviewed. The laser structures and characteristics will be also mentioned.

  14. Evaluation of Replacement Grafts and Punch Grafts in the Treatment of Vitiligo

    Directory of Open Access Journals (Sweden)

    Singh Ajit Kumar

    1980-01-01

    Full Text Available Thirtycasesof vitiligo eachwithminimum of two lesions undent replacement graft and multiple punch grafts in one lesion each. Complications observed at the recipient site like infection and raised nigosed surface were significantly more in replacement grafts. Hypopigmentation of the graft was significantly more when the disease was progressive.

  15. Blue light emitting thiogallate phosphor

    Science.gov (United States)

    Dye, Robert C.; Smith, David C.; King, Christopher N.; Tuenge, Richard T.

    1998-01-01

    A crystalline blue emitting thiogallate phosphor of the formula RGa.sub.2 S.sub.4 :Ce.sub.x where R is selected from the group consisting of calcium, strontium, barium and zinc, and x is from about 1 to 10 atomic percent, the phosphor characterized as having a crystalline microstructure on the size order of from about 100 .ANG. to about 10,000 .ANG. is provided together with a process of preparing a crystalline blue emitting thiogallate phosphor by depositing on a substrate by CVD and resultant thin film electroluminescent devices including a layer of such deposited phosphor on an ordinary glass substrate.

  16. Graft infections after surgical aortic reconstructions

    NARCIS (Netherlands)

    Berger, P.

    2015-01-01

    Prosthetic vascular grafts are frequently used to reconstruct (part) of the aorta. Every surgical procedure caries a certain risk for infection and when a prosthetic aortic graft is implanted, this may lead to an aortic graft infection (AGI). Endovascular techniques have gradually replaced open

  17. The caudal septum replacement graft.

    Science.gov (United States)

    Foda, Hossam M T

    2008-01-01

    To describe a technique for reconstructing the lost tip support in cases involving caudal septal and premaxillary deficiencies. The study included 120 patients with aesthetic and functional nasal problems resulting from the loss of caudal septal and premaxillary support. An external rhinoplasty approach was performed to reconstruct the lost support using a cartilaginous caudal septum replacement graft and premaxillary augmentation with Mersilene mesh. The majority of cases (75%) involved revisions in patients who had previously undergone 1 or more nasal surgical procedures. A caudal septum replacement graft was combined with premaxillary augmentation in 93 patients (77.5%). The mean follow-up period was 3 years (range, 1-12 years). The technique succeeded in correcting the external nasal deformities in all patients and resulted in a significant improvement in breathing in 74 patients (86%) with preoperative nasal obstruction. There were no cases of infection, displacement, or extrusion. The caudal septum replacement graft proved to be very effective in restoring the lost tip support in patients with caudal septal deficiency. Combining the graft with premaxillary augmentation using Mersilene mesh helped increase support and stability over long-term follow-up.

  18. Endovascular stent grafting: a review

    International Nuclear Information System (INIS)

    Kribs, S.

    2001-01-01

    Endovascular stent grafts are intravascular devices composed of surgical graft material and a metallic frame, (Fig. 1). Their main application has been to treat aneurysms, but they have been used in vascular trauma and are being investigated for use in occlusive disease. Their advantage in treating aneurysms over conventional surgical treatment is that they are loaded into relatively small delivery systems (Fig. 2) and can be introduced to the area of interest from a remote site - usually the femoral artery. This avoids the morbidity of surgical exposure in difficult sites, such as the thoracic aorta, and lessens the cardiovascular stress to patients by eliminating the need to surgically cross-clamp the vessel being treated. The first description of abdominal aortic aneurysm exclusion by an endovascular stent graft was provided by Parodi and colleagues in 1991. Much of the early clinical experience in endovascular stent grafting was obtained from centres in Australia and Europe, and they are now reporting midterm follow-up data. There are now many centres in Canada and the United States involved in endovascular research and practice. (author)

  19. SOME TECHNIQUES IN CORNEAL GRAFTING

    African Journals Online (AJOL)

    1971-04-10

    Apr 10, 1971 ... simulate as nearly as possible the intra-ocular tension of the recipient. In this manner the apposition of the graft to the host cornea is as satisfactory as .... rected to 6/9 in spite of distortion and encroachment of the fibrotic process on the pupillary area. There has been no recurrence and inspection shows.

  20. Photodynamic activity of nanostructured fabrics grafted with xanthene and thiazine dyes against opportunistic fungi.

    Science.gov (United States)

    Kim, Joo Ran; Michielsen, Stephen

    2015-09-01

    Fungi are an important class of human pathogens for which considerable research has gone into defeating them. The photodynamic effects of rose bengal (RB), phloxine B (PB), azure A (AA), and toluidine blue O (TBO) dyes to inhibit Aspergillus fumigatus, Aspergillus niger, Trichoderma viride, Penicillium funiculosum, and Chaetomium globosum were investigated grafted to nano- and micro-structured fabrics. Three antifungal tests conducted: broth microdilution test of free dyes, zone of inhibition and quantitative antifungal assays on fabrics grafted with dyes. In the broth microdilution test, free RB displayed the lowest MIC at 32 μM to inhibit visible hyphal growth and germination but the antifungal ability of MIC for other photosensitizers below 63 μM was insignificant. RB and PB showed lower MIC than AA and TBO. In the inhibition zone tests, nanostructured fabrics grafted with RB and PB did not display fungal growth on the surface. Most microstructured fabrics grafted with AA and TBO showed little inhibition. In quantitative antifungal assay, nanostructured fabrics grafted with RB has the largest inhibition rate on T. viride and the lowest inhibition rate on P. funiculosum and the results showed the increasing inhibition rate in the order of AA < TBO < PB < RB. Copyright © 2015 Elsevier B.V. All rights reserved.

  1. Preparation and characterization of new biologically active polyurethane foams.

    Science.gov (United States)

    Savelyev, Yuri; Veselov, Vitali; Markovskaya, Ludmila; Savelyeva, Olga; Akhranovich, Elena; Galatenko, Natalya; Robota, Ludmila; Travinskaya, Tamara

    2014-12-01

    Biologically active polyurethane foams are the fast-developed alternative to many applications of biomedical materials. Due to the polyurethane structure features and foam technology it is possible to incorporate into their structure the biologically active compounds of target purpose via structural-chemical modification of macromolecule. A series of new biologically active polyurethane foams (PUFs) was synthesized with polyethers (MM 2500-5000), polyesters MM (500-2200), 2,4(2,6) toluene diisocyanate, water as a foaming agent, catalysts, foam stabilizers and functional compounds. Different functional compounds: 1,4-di-N-oxy-2,3-bis-(oxymethyl)-quinoxaline (DOMQ), partial sodium salt of poly(acrylic acid) and 2,6-dimethyl-N,N-diethyl aminoacetatanilide hydrochloride were incorporated into the polymer structure/composition due to the chemical and/or physical bonding. Structural peculiarities of PUFs were studied by FTIR spectroscopy and X-ray scattering. Self-adhesion properties of PUFs were estimated by measuring of tensile strength at break of adhesive junction. The optical microscopy method was performed for the PUF morphology studies. Toxicological estimation of the PUFs was carried out in vitro and in vivo. The antibacterial action towards the Gram-positive and Gram-negative bacteria (Escherichia coli ATC 25922, E. coli ATC 2150, Klebsiella pneumoniae 6447, Staphylococcus aureus 180, Pseudomonas aeruginosa 8180, Proteus mirabilis F 403, P. mirabilis 6054, and Proteus vulgaris 8718) was studied by the disc method on the solid nutrient. Physic-chemical properties of the PUFs (density, tensile strength and elongation at break, water absorption and vapor permeability) showed that all studied PUFs are within the operational requirements for such materials and represent fine-cellular foams. Spectral studies confirmed the incorporation of DOMQ into the PUF's macrochain. PUFs are characterized by microheterogeneous structure. They are antibacterially active, non

  2. Influence of therapeutic radiation on polycaprolactone and polyurethane biomaterials

    Energy Technology Data Exchange (ETDEWEB)

    Cooke, Shelley L. [Department of Materials Science and Engineering, Virginia Polytechnic Institute and State University, Blacksburg, VA 24061 (United States); Whittington, Abby R., E-mail: awhit@mse.vt.edu [Department of Materials Science and Engineering, Virginia Polytechnic Institute and State University, Blacksburg, VA 24061 (United States); Department of Chemical Engineering, Virginia Polytechnic Institute and State University, Blacksburg, VA 24061 (United States)

    2016-03-01

    ABSTRACT: Biomedical polymers are exposed in vivo to ionizing radiation as implants, coatings and bystander materials. High levels of ionizing radiation (e.g. X-ray and gamma) have been reported to cause degradation and/or cross-linking in many polymers. This pilot study sought to determine causes of failure, by investigating how therapeutic radiation affects two different porous polymeric scaffolds: polycaprolactone (PCL) and polyurethane (PU). PCL is a bioresorbable material used in biomedical devices (e.g., dentistry, internal fixation devices and targeted drug delivery capsules). PU is commonly used in medical applications (e.g., coatings for pacemakers, tissue expanders, catheter tubing and wound dressings). PU was specifically fabricated to be a non-degradable polymer in this study. Porous scaffolds, fabricated using solvent casting and/or salt leeching techniques, were placed in phosphate buffered saline (PBS, pH = 7.4) and exposed to typical cancer radiotherapy. A total dose of 50 Gy was broken into 25 doses over an eleven-week period. Collected PBS was tested for polymer leachants and degradation products using Gas Chromatography Mass Spectroscopy (GC–MS), results revealed no analyzable leachants from either polymer. Scaffolds were characterized using Environmental Scanning Electron Microscopy, Size-exclusion chromatography (SEC), Differential Scanning Calorimetry (DSC) and Fourier Transform Infrared Spectroscopy (FTIR). No gross visual changes were observed in either polymer, however PU exhibited microstructure changes after irradiation. Increased number average molecular weight and weight average molecular weight in PCL and PU were observed after irradiation, indicating crosslinking. PU displayed an increase in intrinsic viscosity that further confirms increased crosslinking. PCL and PU showed decreases in crystallinity after irradiation, and PU crystallinity shifted from long-range-order hard segments to short-range-order hard segments after

  3. The Blue Revolution in Asia

    DEFF Research Database (Denmark)

    Ponte, Stefano; Kelling, Ingrid; Jespersen, Karen Sau

    2014-01-01

    In this article, we examine the upgrading trajectories of selected aquaculture value chains in four Asian countries and the links between upgrading and three factors of value chain governance: coordination mechanisms; types of drivers; and domestic regulation. We find instances of improving produ...... of upgrading the "blue revolution" in Asia...

  4. Blue Ocean vs. Five Forces

    NARCIS (Netherlands)

    A.E. Burke (Andrew); A.J. van Stel (André); A.R. Thurik (Roy)

    2010-01-01

    textabstractThe article reports on the authors' research in the Netherlands which focused on a profit model in Dutch retail stores and a so-called blue-ocean approach which requires a new market that attracts consumers and increases profits. Topics include the competitive strategy approach to

  5. Mobilizing investors for blue growth

    NARCIS (Netherlands)

    Burg, van den Sander W.K.; Stuiver, Marian; Bolman, Bas C.; Wijnen, Roland; Selnes, Trond; Dalton, Gordon

    2017-01-01

    The European Union's Blue Growth Strategy is a long term strategy to support sustainable growth in the marine and maritime sectors, aiming to contribute to innovation and economic growth (European Commission, 2012). The EU sees the financial sector as a key partner to bring about transition to

  6. Nobel Prize for blue LEDs

    International Nuclear Information System (INIS)

    Kraftmakher, Yaakov

    2015-01-01

    A brief review of lighting technologies is presented. Unavoidable restrictions for incandescent light bulbs caused by the Planck distribution and properties of the human eye are illustrated. The efficiency and luminous efficacy of thermal radiation are calculated for various temperatures; the results clearly show the limitations for thermal radiators. The only way to overcome these limitations is using non-thermal radiators, such as fluorescent lamps and light-emitting diodes (LEDs). Unique advantages of LEDs undoubtedly made a revolution in this field. A crucial element of this progress is the blue LEDs (Nobel Prize 2014). Some experiments with a blue and a green LED are described: (i) the luminescence triggered in a green-yellow phosphor inside a white LED by the blue LED; (ii) radiant spectra and ‘efficiency droop’ in the LEDs; (iii) modulation of the blue LED up to 4 MHz; and (iv) the h/e ratio from the turn-on voltage of the green LED. The experiments are suitable for undergraduate laboratories and usable as classroom demonstrations. (paper)

  7. Nobel Prize for blue LEDs

    Science.gov (United States)

    Kraftmakher, Yaakov

    2015-05-01

    A brief review of lighting technologies is presented. Unavoidable restrictions for incandescent light bulbs caused by the Planck distribution and properties of the human eye are illustrated. The efficiency and luminous efficacy of thermal radiation are calculated for various temperatures; the results clearly show the limitations for thermal radiators. The only way to overcome these limitations is using non-thermal radiators, such as fluorescent lamps and light-emitting diodes (LEDs). Unique advantages of LEDs undoubtedly made a revolution in this field. A crucial element of this progress is the blue LEDs (Nobel Prize 2014). Some experiments with a blue and a green LED are described: (i) the luminescence triggered in a green-yellow phosphor inside a white LED by the blue LED; (ii) radiant spectra and ‘efficiency droop’ in the LEDs; (iii) modulation of the blue LED up to 4 MHz; and (iv) the h/e ratio from the turn-on voltage of the green LED. The experiments are suitable for undergraduate laboratories and usable as classroom demonstrations.

  8. Oleic and Undecylenic Acids as Renewable Feedstocks in the Synthesis of Polyols and Polyurethanes

    Directory of Open Access Journals (Sweden)

    Virginia Cádiz

    2010-10-01

    Full Text Available Nowadays, the utilization of raw materials derived from renewable feedstock is in the spotlight of the chemical industry, as vegetable oils are one of the most important platform chemicals due to their universal availability, inherent biodegradability and low price. Taking into account that polyurethanes are one of the most important industrial products exhibiting versatile properties suitable for use in many fields, our research is focused on exploiting fatty acids in the preparation of biobased polyols and polyurethanes. This review is organized as a function of the nature of the final polyurethane systems; hence we describe the preparation of linear thermoplastic and crosslinked polyurethanes derived from oleic and undecylenic acids-based diols and polyols, respectively.

  9. Improving sensitivity of the polyurethane/CNT laminate strain sensor by controlled mechanical preload

    International Nuclear Information System (INIS)

    Slobodian, Petr; Olejnik, Robert; Matyas, Jiri; Babar, Dipak Gorakh

    2016-01-01

    This article describes strain detection potential of polyurethane/CNT layered composite and further possible enhance of its sensitivity to strain, expressed by value of gauge factor, GF, employing its controlled mechanical preload. In course of its fabrication a non-woven polyurethane membrane made by electro spinning was used as filtering membrane for CNT aqueous dispersion. Final CNT polyurethane laminate composite is prepared by compression molding. Produced polyurethane/CNT composite laminate is electrically conductive and high elastic. Its elongation leads to change of its macroscopic electrical resistance. Changes in resistance are further reversible, reproducible and can monitor deformation in real time. Gauge factor reaches very high values around 8 for strain reaching 3.5% comparing with conventional metallic strain gauges. Finally, controlled mechanical preload significantly increases value of GF. For example for value of 8.1% of preload value of GF reaches 23.3 for strain 3.5%. (paper)

  10. Improving sensitivity of the polyurethane/CNT laminate strain sensor by controlled mechanical preload

    Science.gov (United States)

    Slobodian, Petr; Olejnik, Robert; Matyas, Jiri; Gorakh Babar, Dipak

    2016-03-01

    This article describes strain detection potential of polyurethane/CNT layered composite and further possible enhance of its sensitivity to strain, expressed by value of gauge factor, GF, employing its controlled mechanical preload. In course of its fabrication a non-woven polyurethane membrane made by electro spinning was used as filtering membrane for CNT aqueous dispersion. Final CNT polyurethane laminate composite is prepared by compression molding. Produced polyurethane/CNT composite laminate is electrically conductive and high elastic. Its elongation leads to change of its macroscopic electrical resistance. Changes in resistance are further reversible, reproducible and can monitor deformation in real time. Gauge factor reaches very high values around 8 for strain reaching 3.5% comparing with conventional metallic strain gauges. Finally, controlled mechanical preload significantly increases value of GF. For example for value of 8.1% of preload value of GF reaches 23.3 for strain 3.5%.

  11. Characterization of polyurethane based on polyol synthesized from glycerol and hexamethylene diisocyanate

    International Nuclear Information System (INIS)

    Carvalho, Sabrina M.; Weber, Vanessa; Silva, Tailu N.; Barreto, Pedro L.M.

    2009-01-01

    A new polyol based on glycerol was synthesized and used in the production of polyurethane by reaction with hexamethylene diisocyanate. The polyol was characterized by nuclear magnetic resonance spectroscopy (NMR) and Fourier transform-infrared spectroscopy (FTIR). The polyurethane produced was characterized by FTIR, thermogravimetry (TG), differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). The polyol was shown to be reactive with hexamethylene diisocyanate, as the FTIR spectrum showed no free isocyanate groups and identified the presence of group -C=O of urethane groups. Analysis by DSC showed that the sample of polyurethane has a glass transition temperature around -8.53 deg C and SEM micrographs showed fracture and surface continuous and not broken. The thermogravimetric analysis showed that the polyurethane produced has a high thermal stability with a temperature of maximum degradation around 430 deg C. (author)

  12. Development of test systems for characterizing emissions from spray polyurethane foam insulation (SPFI)

    Science.gov (United States)

    The relationship between onsite manufacture of spray polyurethane foam insulation (SPFI) and potential exposures to diisocyanates, amines, flame retardants (FRs), blowing agents, aldehydes and other organic compounds that may be emitted from SPFI is not well understood. EPA is de...

  13. In vitro analysis of polyurethane foam as a topical hemostatic agent.

    Science.gov (United States)

    Broekema, Ferdinand I; van Oeveren, Wim; Zuidema, Johan; Visscher, Susan H; Bos, Rudolf R M

    2011-04-01

    Topical hemostatic agents can be used to treat problematic bleedings in patients who undergo surgery. Widely used are the collagen- and gelatin-based hemostats. This study aimed to develop a fully synthetic, biodegradable hemostatic agent to avoid exposure to animal antigens. In this in vitro study the suitability of different newly developed polyurethane-based foams as a hemostatic agent has been evaluated and compared to commonly used agents. An experimental in vitro test model was used in which human blood flowed through the test material. Different modified polyurethane foams were compared to collagen and gelatin. The best coagulation was achieved with collagen. The results of the polyurethane foam improved significantly by increasing the amount of polyethylene glycol. Therefore, the increase of the PEG concentration seems a promising approach. Additional in vivo studies will have to be implemented to assess the application of polyurethane foam as a topical hemostatic agent.

  14. Synthesis and Characterization of Novel Polyurethanes Based on Vegetable Oils Amide and Ester Polyols

    Directory of Open Access Journals (Sweden)

    Vladimir YAKUSHIN

    2014-09-01

    Full Text Available Amide and ester type polyols were synthesized from rapeseed, sunflower and castor oils, and two types of ethanolamine (diethanolamine and triethanolamine at different molar ratio. Poly(urethane amides and polyester urethanes based on the synthesized polyols were prepared. The effect of the chemical structure of the obtained polyurethanes on density, glass transition temperature, thermal stability and mechanical properties was investigated. The influence of the content of OH groups in the synthesized polyols on the specified characteristics was estimated. It has been found that poly(urethane amides have better mechanical characteristics, but their thermal stability is lower than that of polyester urethanes. The chemical structure of the synthesized polyols and polyurethanes is qualitatively confirmed by IR-spectroscopy data. DOI: http://dx.doi.org/10.5755/j01.ms.20.3.4532

  15. New Flexible FR Polyurethane Foams for Energy Absorption Applications, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Project involves development of new flexible FR polyurethane (PU)insulation foams through a non-toxic environmentally friendly composite approach. Foams have...

  16. Radiochemical grafting of acryonitrile on polystyrene

    International Nuclear Information System (INIS)

    Jendrychowska-Bonamour, A.M.; Michot, C.

    1977-01-01

    Polystyrene polyacrylonitrile copolymers have been prepared by the direct radio-induced grafting method. The reaction has been carried out in a gel of polystyrene swollen by the monomer. The ungrafted polystyrene has been extracted by toluene. It has been possible to separate grafted copolymers from homopolymer traces, despite the very strong dipole-dipole interactions exhibited in solution between polyacrylonitrile chains; afterwards these grafted copolymers were fractionated by composition. The limits of solubility and the glass transition temperatures of the grafted copolymers have been determined. The properties of grafted copolymers have been compared with those of block polyacrylonitrile copolymers. (authors)

  17. Homogeneous cation exchange membrane by radiation grafting

    International Nuclear Information System (INIS)

    Kolhe, Shailesh M.; G, Agathian; Ashok Kumar

    2001-01-01

    Preparation of a strong cation exchange membrane by radiation grafting of styrene on to polyethylene (LDPE) film by mutual irradiation technique in the presence of air followed by sulfonation is described. The grafting has been carried out in the presence of air and without any additive. Low dose rate has been seen to facilitate the grafting. Further higher the grafting percentage more is the exchange capacity. The addition of a swelling agent during the sulfonation helped in achieving the high exchange capacity. The TGA-MASS analysis confirmed the grafting and the sulfonation. (author)

  18. Radiation Crosslinking of Polyurethanes: Characterization by FTIR, TGA, SEM, XRD, and Raman Spectroscopy

    OpenAIRE

    Ghobashy, Mohamed Mohamady; Abdeen, Zizi I.

    2016-01-01

    Gamma radiation can be used for enhancing the physical properties of polyurethane (PU). Radiation was used to crosslink a polyurethane at room temperature; four samples of the PU solid film are irradiated at variable four radiation doses 0, 50, 100, and 150 kGy under vacuum conditions. Crosslinking radiation is more common than oxidative degradation and crosslinking is believed to be more efficient in the soft segment of PU. The structure of the PUs is performed by Fourier transform infrared ...

  19. Blends of natural rubber and polyurethane lattices studied by solid-state NMR

    International Nuclear Information System (INIS)

    Ricardo, Nagila M.P.S.; Franca, Francisco C.F. de; Price, Colin; Heatley, Frank

    2001-01-01

    Molecular mixing in films formed from a mixture of a polyurethane and natural rubber lattices has been studied using 1 H and 13 C solid-state NMR. The techniques employed include 1 H relaxation measurements, and 13 C cross-polarisation and direct excitation methods. The spectra of the blends were essentially a weighted superposition of the spectra of the individual components, indicating that the polyurethane and rubber remained phase-separated in large domains. (author)

  20. Synthesis of phosphorus-containing polyurethanes and poly(urethane-acrylate)s

    OpenAIRE

    SÜDEMEN, MAHİR BURAK; ÖNEN, HACER AYŞEN

    2017-01-01

    Solvent-based polyurethanes and poly(urethane-acrylate)s were synthesized using phosphorus-containing polyester polyols in order to compare the thermal properties of different polymer types. Since the location of the phosphorus group might have vital importance when comparing the thermal properties, phosphorus groups were kept on the pendant chains in poly(urethane-acrylate)s using phosphorus-containing urethane macromonomers while they were kept on the backbone in polyurethanes. The effect o...

  1. Bio-based polyurethane foams from renewable resources

    Science.gov (United States)

    Stanzione, M.; Russo, V.; Sorrentino, A.; Tesser, R.; Lavorgna, M.; Oliviero, M.; Di Serio, M.; Iannace, S.; Verdolotti, L.

    2016-05-01

    In the last decades, bio-derived natural materials, such as vegetable oils, polysaccharides and biomass represent a rich source of hydroxyl precursors for the synthesis of polyols which can be potentially used to synthesize "greener" polyurethane foams. Herein a bio-based precursor (obtained from succinic acid) was used as a partial replacement of conventional polyol to synthesize PU foams. A mixture of conventional and bio-based polyol in presence of catalysts, silicone surfactant and diphenylmethane di-isocyanate (MDI) was expanded in a mold and cured for two hours at room temperature. Experimental results highlighted the suitability of this bio-precursor to be used in the production of flexible PU foams. Furthermore the chemo-physical characterization of the resulting foams show an interesting improvement in thermal stability and elastic modulus with respect to the PU foams produced with conventional polyol.

  2. Development of Flame Retardants for Engineering Polymers and Polyurethanes

    Science.gov (United States)

    Desikan, Anantha

    2013-03-01

    With a broad portfolio of brominated, organophosphorus and inorganic flame retardants, ICL Industrial Products (ICL-IP) is engaged in the development of new flame retardants by exploiting the synergism between bromine based, phosphorus based and other halogen-free flame retardants. ICL-IP is also focusing on the development of polymeric and reactive flame retardants. This presentation will give examples of existing and new polymeric and reactive products for applications in thermoplastics, thermosets and polyurethane foam. This presentation will also show examples of phosphorus-bromine synergism allowing partial or complete elimination of antimony trioxide in many thermoplastics for electronic applications. New synergistic combinations of magnesium hydroxide with phosphorus and other halogen-free FRs will be presented. Work done in collaboration with S. Levchik, ICL-IP America, 430 Saw Mill Rriver Rd., Ardsley, NY, 10502, USA and M. Leifer, ICL-IP, P. O. Box 180, Beer Sheva 84101, Israel.

  3. Thermal stability of segmented polyurethane elastomers reinforced by clay particles

    Directory of Open Access Journals (Sweden)

    Pavličević Jelena

    2009-01-01

    Full Text Available The aim of this work was to determine the influence of clay nanoparticles on thermal properties of segmented polyurethanes based on hexamethylene- diisocyanate, aliphatic polycarbonate diol and 1,4-butanediol as chain extender. The organically modified particles of montmorillonite and bentonite were used as reinforcing fillers. The structure of elastomeric materials was varied either by diol type or chain extender content. The ratio of OH groups from diol and chain extender (R was either 1 or 10. Thermal properties of prepared materials were determined using modulated differential scanning calorimetry (MDSC. Thermal stability of obtained elastomers has been studied by simultaneously thermogravimetry coupled with DSC. The glass transition temperature, Tg, of soft segments for all investigated samples was about -33°C. On the basis of DTG results, it was concluded that obtained materials were very stable up to 300°C.

  4. Electrospun Thermoplastic Polyurethane Mats Containing Naproxen– Cyclodextrin Inclusion Complex

    Directory of Open Access Journals (Sweden)

    Akduman Çiğdem

    2014-12-01

    Full Text Available Incorporation of cyclodextrins (CDs into electrospun nanofibrous materials can be considered as potential candidates for functional medical textile applications. Naproxen (NAP is a type of non-steroidal anti-inflammatory drug commonly administered for the treatment of pain, inflammation and fever. Drug-inclusion complex formation with CDs is an approach to improve the aqueous solubility via molecular encapsulation of the drug within the cavity of the more soluble CD molecule. In this study, NAP or different NAP-CD inclusion complexes loaded nanofibres were successfully produced through electrospinning and characterised. The inclusion complex loaded mats exhibited significantly faster release profiles than NAP-loaded thermoplastic polyurethane (TPU mats. Overall, NAP-inclusion complex loaded TPU electrospun nanofibres could be used as drug delivery systems for acute pain treatments since they possess a highly porous structure that can release the drug immediately.

  5. Investigating the influence of conduit residues on polyurethane plates

    Directory of Open Access Journals (Sweden)

    Rachel Faverzani Magnago

    Full Text Available Abstract Converting waste into a product similar to the original one or into another useful product is to save energy, protect natural resources, and bring back to the production cycle what was discarded. In that direction, new polyurethane-based composites have been developed by incorporating 5%, 10%, 15%, and 20% PVC conduit discarded by the construction industry. The objective of this study was to investigate the interaction between the phases of waste incorporation and the effect upon the new material properties. The samples were produced by the polycondensation process. Microstructural analysis revealed a reduction in pore size across the polymer matrix. However, there were no changes in thermal insulation, water absorption, compressive strength, and burning rate tests and in the thermogravimetric analysis and differential scanning calorimetry. The results from this study showed that the replacement of raw material by waste did not affect its properties.

  6. Modeling Manufacturing Impacts on Aging and Reliability of Polyurethane Foams

    Energy Technology Data Exchange (ETDEWEB)

    Rao, Rekha R.; Roberts, Christine Cardinal; Mondy, Lisa Ann; Soehnel, Melissa Marie; Johnson, Kyle; Lorenzo, Henry T.

    2016-10-01

    Polyurethane is a complex multiphase material that evolves from a viscous liquid to a system of percolating bubbles, which are created via a CO2 generating reaction. The continuous phase polymerizes to a solid during the foaming process generating heat. Foams introduced into a mold increase their volume up to tenfold, and the dynamics of the expansion process may lead to voids and will produce gradients in density and degree of polymerization. These inhomogeneities can lead to structural stability issues upon aging. For instance, structural components in weapon systems have been shown to change shape as they age depending on their molding history, which can threaten critical tolerances. The purpose of this project is to develop a Cradle-to-Grave multiphysics model, which allows us to predict the material properties of foam from its birth through aging in the stockpile, where its dimensional stability is important.

  7. Polyurethane Nanofiber Membranes for Waste Water Treatment by Membrane Distillation

    Directory of Open Access Journals (Sweden)

    T. Jiříček

    2017-01-01

    Full Text Available Self-sustained electrospun polyurethane nanofiber membranes were manufactured and tested on a direct-contact membrane distillation unit in an effort to find the optimum membrane thickness to maximize flux rate and minimize heat losses across the membrane. Also salt retention and flux at high salinities up to 100 g kg−1 were evaluated. Even though the complex structure of nanofiber layers has extreme specific surface and porosity, membrane performance was surprisingly predictable; the highest flux was achieved with the thinnest membranes and the best energy efficiency was achieved with the thickest membranes. All membranes had salt retention above 99%. Nanotechnology offers the potential to find modern solutions for desalination of waste waters, by introducing new materials with revolutionary properties, but new membranes must be developed according to the target application.

  8. Creep of thermoplastic polyurethane reinforced with ozone functionalized carbon nanotubes

    Directory of Open Access Journals (Sweden)

    Z. Zhang

    2012-09-01

    Full Text Available This work focused on the mechanical behavior, especially creep resistance, of thermoplastic polyurethane (TPU filled with ozone-treated multi-walled carbon nanotubes (MWCNTs. It was found that the ozone functionalization of MWCNTs could improve their dispersion and interfacial adhesion to the TPU matrix as proved by scanning electron microscope and Raman spectrometer. It finally contributed to the enhancement of Young’s modulus and yield strength of TPU/MWCNT composites. Moreover, the creep resistance and recovery of MWCNT/TPU composites revealed a significant improvement by incorporating ozone functionalized MWCNTs. The strong interaction between the modified MWCNTs and TPU matrix would enhance the interfacial bonding and facilitate the load transfer, resulting in low creep strain and unrecovered strain.

  9. Thermal Degradation Studies of A Polyurethane Propellant Binder

    Energy Technology Data Exchange (ETDEWEB)

    Assink, R.A.; Celina, M.; Gillen, K.T.; Graham, A.C.; Minier, L.M.

    1999-06-12

    The thermal oxidative aging of a crosslinked hydroxy-terminated polybutadiene (HTPB)/isophorone diisocyanate (IPDI) based polyurethane rubber, used as a polymeric binder in solid propellant grain, was investigated at temperatures from 25 C to 125 C. The changes in tensile elongation, polymer network properties and chain dynamics, mechanical hardening and density were determined with a range of techniques including modulus profiling, solvent swelling, NMR relaxation and O{sub 2} permeability measurements. We critically evaluated the Arrhenius methodology that is commonly used with a linear extrapolation of high temperature aging data using extensive data superposition and highly sensitive oxygen consumption experiments. The effects of other constituents in the propellant formulation on aging were also investigated. We conclude that crosslinking is the dominant process at higher temperatures and that the degradation involves only limited hardening in the bulk of the material. Significant curvature in the Arrhenius diagram of the oxidation rates was observed. This is similar to results for other rubber materials.

  10. Degradation Mechanisms of Transparent Polyurethane Interlayer under UV Irradiation

    Directory of Open Access Journals (Sweden)

    OU Yingchun

    2017-01-01

    Full Text Available According to the ageing problem of laminated transparency, the trasparent polyurethane film used as interlayer had been irradiated by fluorescent ultraviolet lamp for 0 h, 200 h, 300 h, and 500 h respectively. With the aid of ultraviolet/visible spectrophotometer, FTIR and SEM etc., the color, structure and morphology of the materials were studied. SEM shows that when the irradiation time is increased to 500 h, the film surface cracks. The UV degradation mechanisms are that -CH2- of the position connecting the O and N from hard segment and the soft segment are easy to oxidize and produce hydrogen peroxide under UV and oxygen, which is furtherly oxidized to CO, and some part of the C-O and C-N bonds is cracked through β scission, and then the materials are fractured.

  11. Investigation of Polyvinyl Chloride and Thermoplastic Polyurethane Waste Blend Miscibility

    Directory of Open Access Journals (Sweden)

    Agnė LAUKAITIENĖ

    2013-12-01

    Full Text Available In this study the miscibility of polyvinyl chloride (PVC and poly-e-caprolactone based thermoplastic polyurethanes (TPU waste blends were investigated by dilute solution viscometry. The miscibility criteria a, Db, DB, and D[h] were used to assess the degree of miscibility of polymers in tetrahydrofuran solution. Also, to assess the miscibility and microstructure of PVC/TPU blends obtained by solution casting have been characterized by X-ray diffraction. The tensile strength and deformability properties varying on the blend composition were determined. It was found that PVC and TPU are partially miscible, their blend is amorphous and show two-phase structure. TPU changes the mechanical behaviour of PVC the blends. Increase of TPU content causes PVC elongation at break increase and tensile strength decreases. DOI: http://dx.doi.org/10.5755/j01.ms.19.4.3145

  12. Thermoplastic Polyurethane Elastomer Nanocomposites: Morphology, Thermophysical, and Flammability Properties

    Directory of Open Access Journals (Sweden)

    Wai K. Ho

    2010-01-01

    Full Text Available Novel materials based on nanotechnology creating nontraditional ablators are rapidly changing the technology base for thermal protection systems. Formulations with the addition of nanoclays and carbon nanofibers in a neat thermoplastic polyurethane elastomer (TPU were melt-compounded using twin-screw extrusion. The TPU nanocomposites (TPUNs are proposed to replace Kevlar-filled ethylene-propylene-diene-monomer rubber, the current state-of-the-art solid rocket motor internal insulation. Scanning electron microscopy analysis was conducted to study the char characteristics of the TPUNs at elevated temperatures. Specimens were examined to analyze the morphological microstructure during the pyrolysis reaction and in fully charred states. Thermophysical properties of density, specific heat capacity, thermal diffusivity, and thermal conductivity of the different TPUN compositions were determined. To identify dual usage of these novel materials, cone calorimetry was employed to study the flammability properties of these TPUNs.

  13. Finite element analysis of bending performance on polyurethane composite panel

    Science.gov (United States)

    Jia, Minli; Li, Hongqiao; Wang, Xiaoming

    2017-09-01

    The finite element analysis model of polyurethane composite panel (simply named PCP) is established by using ABAQUS software. In view of the PCPs made of different thickness of surface board, their bending performance is carried out on finite element analysis, and the load-deflection curves which come from it are compared with the experimental results. The results show that the values between finite element analysis and experiment agree well with each other. It can be deduced that the established finite element model is fit to simulate the bending test of PCPs. The simulation not only has certain reference significance to the optimal design for the bending performance of PCPs, but also to the choice of PCPs in the practical project.

  14. Dynamics of bone graft healing around implants

    Directory of Open Access Journals (Sweden)

    Narayan Venkataraman

    2015-01-01

    A few questions arise pertaining to the use of bone grafts along with implants are whether these are successful in approximation with implant. Do they accelerate bone regeneration? Are all defects ultimately regenerated with new viable bone? Is the bone graft completely resorbed or integrated in new bone? Does the implant surface characteristic positively affect osseointegration when used with a bone graft? What type of graft and implant surface can be used that will have a positive effect on the healing type and time? Finally, what are the dynamics of bone graft healing around an implant? This review discusses the cellular and molecular mechanisms of bone graft healing in general and in vicinity of another foreign, avascular body, namely the implant surface, and further, the role of bone grafts in osseointegration and/or clinical success of the implants.

  15. Experimental Study of Fire Hazards of Thermal-Insulation Material in Diesel Locomotive: Aluminum-Polyurethane

    Science.gov (United States)

    Zhang, Taolin; Zhou, Xiaodong; Yang, Lizhong

    2016-01-01

    This work investigated experimentally and theoretically the fire hazards of thermal-insulation materials used in diesel locomotives under different radiation heat fluxes. Based on the experimental results, the critical heat flux for ignition was determined to be 6.15 kW/m2 and 16.39 kW/m2 for pure polyurethane and aluminum-polyurethane respectively. A theoretical model was established for both to predict the fire behaviors under different circumstances. The fire behavior of the materials was evaluated based on the flashover and the total heat release rate (HRR). The fire hazards levels were classified based on different experimental results. It was found that the fire resistance performance of aluminum-polyurethane is much better than that of pure-polyurethane under various external heat fluxes. The concentration of toxic pyrolysis volatiles generated from aluminum-polyurethane materials is much higher than that of pure polyurethane materials, especially when the heat flux is below 50 kW/m2. The hazard index HI during peak width time was proposed based on the comprehensive impact of time and concentrations. The predicted HI in this model coincides with the existed N-gas and FED models which are generally used to evaluate the fire gas hazard in previous researches. The integrated model named HNF was proposed as well to estimate the fire hazards of materials by interpolation and weighted average calculation. PMID:28773295

  16. Degradability of cross-linked polyurethanes based on synthetic polyhydroxybutyrate and modified with polylactide.

    Science.gov (United States)

    Brzeska, Joanna; Morawska, Magda; Sikorska, Wanda; Tercjak, Agnieszka; Kowalczuk, Marek; Rutkowska, Maria

    2017-01-01

    In many areas of application of conventional non-degradable cross-linked polyurethanes (PUR), there is a need for their degradation under the influence of specific environmental factors. It is practiced by incorporation of sensitive to degradation compounds (usually of natural origin) into the polyurethane structure, or by mixing them with polyurethanes. Cross-linked polyurethanes (with 10 and 30%wt amount of synthetic poly([ R,S ]-3-hydroxybutyrate) (R,S-PHB) in soft segments) and their physical blends with poly([d,l]-lactide) (PDLLA) were investigated and then degraded under hydrolytic (phosphate buffer solution) and oxidative (CoCl 2 /H 2 O 2 ) conditions. The rate of degradation was monitored by changes of samples mass, morphology of surface and their thermal properties. Despite the small weight losses of samples, the changes of thermal properties of polymers and topography of their surface indicated that they were susceptible to gradual degradation under oxidative and hydrolytic conditions. Blends of PDLLA and polyurethane with 30 wt% of R,S -PHB in soft segments and PUR/PDLLA blends absorbed more water and degraded faster than polyurethane with low amount of R,S -PHB.

  17. Synthesis and Application of Jatropha Oil based Polyurethane as Paint Coating Material

    Directory of Open Access Journals (Sweden)

    Zainal Alim Mas’ud

    2012-08-01

    Full Text Available Recently, the use of renewable sources in the preparation of various industrial materials has been revitalized in response to environmental concerns. Natural oils are considered to be the most important genre of renewable sources. Jatropha curcas oil (JPO based polyol is an alternative material that may possibly replace petrochemical-based polyol for polyurethane coating material. Polyurethane was synthesized by reacting JPO-based polyol with isocyanate. To produce JPO-based polyol, JPO was first epoxidized to form epoxidized J. curcas oil (EJP, subsequently it was converted to polyol by the opening ring reaction with acrylic acid (AA using triethylamine (TEA as a catalyst. The JPO-based polyurethane film resulting from this study is compared with polyurethane film from commercial polyol for gloss, hardness, and adhesion quality. The result showed that the source of polyol has an influence on gloss, hardness, and adhesion of polyurethane film, but the differences with using isocyanate has less influence. Using visual observation, polyurethane film produced from L.OHV polyol, H.OHV polyol and commercial polyol have similar quality.

  18. Estimation of efficiency of hydrotransport pipelines polyurethane coating application in comparison with steel pipelines

    Science.gov (United States)

    Aleksandrov, V. I.; Vasilyeva, M. A.; Pomeranets, I. B.

    2017-10-01

    The paper presents analytical calculations of specific pressure loss in hydraulic transport of the Kachkanarsky GOK iron ore processing tailing slurry. The calculations are based on the results of the experimental studies on specific pressure loss dependence upon hydraulic roughness of pipelines internal surface lined with polyurethane coating. The experiments proved that hydraulic roughness of polyurethane coating is by the factor of four smaller than that of steel pipelines, resulting in a decrease of hydraulic resistance coefficients entered into calculating formula of specific pressure loss - the Darcy-Weisbach formula. Relative and equivalent roughness coefficients are calculated for pipelines with polyurethane coating and without it. Comparative calculations show that hydrotransport pipelines polyurethane coating application is conductive to a specific energy consumption decrease in hydraulic transport of the Kachkanarsky GOC iron ore processing tailings slurry by the factor of 1.5. The experiments were performed on a laboratory hydraulic test rig with a view to estimate the character and rate of physical roughness change in pipe samples with polyurethane coating. The experiments showed that during the following 484 hours of operation, roughness changed in all pipe samples inappreciably. As a result of processing of the experimental data by the mathematical statistics methods, an empirical formula was obtained for the calculation of operating roughness of polyurethane coating surface, depending on the pipeline operating duration with iron ore processing tailings slurry.

  19. Flexible camphor diamond-like carbon coating on polyurethane to prevent Candida albicans biofilm growth.

    Science.gov (United States)

    Santos, Thaisa B; Vieira, Angela A; Paula, Luciana O; Santos, Everton D; Radi, Polyana A; Khouri, Sônia; Maciel, Homero S; Pessoa, Rodrigo S; Vieira, Lucia

    2017-04-01

    Camphor was incorporated in diamond-like carbon (DLC) films to prevent the Candida albicans yeasts fouling on polyurethane substrates, which is a material commonly used for catheter manufacturing. The camphor:DLC and DLC film for this investigation was produced by plasma enhanced chemical vapor deposition (PECVD), using an apparatus based on the flash evaporation of organic liquid (hexane) containing diluted camphor for camphor:DLC and hexane/methane, mixture for DLC films. The film was deposited at a low temperature of less than 25°C. We obtained very adherent camphor:DLC and DLC films that accompanied the substrate flexibility without delamination. The adherence of camphor:DLC and DLC films on polyurethane segments were evaluated by scratching test and bending polyurethane segments at 180°. The polyurethane samples, with and without camphor:DLC and DLC films were characterized by Raman spectroscopy, scanning electron microscopy, atomic force microscopy, and optical profilometry. Candida albicans biofilm formation on polyurethane, with and without camphor:DLC and DLC, was assessed. The camphor:DLC and DLC films reduced the biofilm growth by 99.0% and 91.0% of Candida albicans, respectively, compared to bare polyurethane. These results open the doors to studies of functionalized DLC coatings with biofilm inhibition properties used in the production of catheters or other biomedical applications. Copyright © 2017 Elsevier Ltd. All rights reserved.

  20. Tracking composition of microbial communities for simultaneous nitrification and denitrification in polyurethane foam.

    Science.gov (United States)

    Chen, Yuan; Wang, Li; Ma, Fang; Yang, Ji-xian; Qiu, Shan

    2014-01-01

    The process of simultaneous nitrification and denitrification (SND) of immobilized microorganisms in polyurethane form is discussed. The effect of different positions within the polyurethane carrier on microbial community response for the SND process is investigated by a combination of denaturing gradient gel electrophoresis profiles of the 16S rRNA gene V3 region and scanning electron microscopy. Results show that polyurethane, which consists of a unique porous structure, is an ideal platform for biofilm stratification of aerobe, anaerobe and facultative microorganisms in regard to the SND process. The community structure diversity response to different positions was distinct. The distributions of various functional microbes, detected from the surface aerobic stratification to the interior anaerobic stratification of polyurethane, were mainly nitrifying and denitrifying bacteria. Meanwhile aerobic denitrifying bacteria such as Paracoccus sp., Agrobacterium rubi and Ochrobactrum sp. were also adhered to the interior and surface of polyurethane. The SND process occurring on polyurethane foam was carried out by two independent processes: nitrogen removal and aerobic denitrification.

  1. Morphology and damping behavior of polyurethane/PMMA simultaneous interpenetrating networks

    Directory of Open Access Journals (Sweden)

    Wang S.H.

    2001-01-01

    Full Text Available A series of polyurethane/PMMA simultaneous interpenetrating networks (SINs with various hard segment contents (X in the polyurethane phase (X = 15.5 to 36.5% in polyurethane and wide range of polyurethane (PU to polyacrylate (PA ratio (PU/PA = 20:80 to 80:20 were prepared, and the damping and mechanical properties of these materials were studied. The damping of polyurethane soft phase was increased and shifted to lower temperature with increased content of PA vitreous phase. The mechanical properties were improved with increasing PA contents. The results show that PA and the polyurethane hard segment interaction play a special role in chain interpenetration density and its magnitude is revealed by the decreased dispersed domain size observed by scanning electron microscopy (SEM and increased loss area as measured by dynamic mechanical thermal analysis (DMTA. When the weight ratio of PU/PA was 40:60, the resulting SIN materials possessed better damping properties, independent of X concentration.

  2. Rheological and Mechanical Behavior of Silk Fibroin Reinforced Waterborne Polyurethane

    Directory of Open Access Journals (Sweden)

    Yongzhen Tao

    2016-03-01

    Full Text Available Waterborne polyurethane (WPU is a versatile and environment-friendly material with growing applications in both industry and academia. Silk fibroin (SF is an attractive material known for its structural, biological and hemocompatible properties. The SF reinforced waterborne polyurethane (WPU is a promising scaffold material for tissue engineering applications. In this work, we report synthesis and characterization of a novel nanocomposite using SF reinforced WPU. The rheological behaviors of WPU and WPU-SF dispersions with different solid contents were investigated with steady shear and dynamic oscillatory tests to evaluate the formation of the cross-linked gel structure. The average particle size and the zeta potential of WPU-SF dispersions with different SF content were examined at 25 °C to investigate the interaction between SF and WPU. FTIR, SEM, TEM and tensile testing were performed to study the effects of SF content on the structural morphology and mechanical properties of the resultant composite films. Experimental results revealed formation of gel network in the WPU dispersions at solid contents more than 17 wt %. The conjugate reaction between the WPU and SF as well as the hydrogen bond between them helped in dispersing the SF powder into the WPU matrix as small aggregates. Addition of SF to the WPU also improved the Young’s modulus from 0.30 to 3.91 MPa, tensile strength from 0.56 to 8.94 MPa, and elongation at break from 1067% to 2480%, as SF was increased up to 5 wt %. Thus, significant strengthening and toughening can be achieved by introducing SF powder into the WPU formulations.

  3. 21 CFR 133.106 - Blue cheese.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Blue cheese. 133.106 Section 133.106 Food and... CONSUMPTION CHEESES AND RELATED CHEESE PRODUCTS Requirements for Specific Standardized Cheese and Related Products § 133.106 Blue cheese. (a) Description. (1) Blue cheese is the food prepared by the procedure set...

  4. 75 FR 65525 - Anthem Blue Cross Blue Shield, Claim Management Services, Inc. Operations, a Division of...

    Science.gov (United States)

    2010-10-25

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-74,327] Anthem Blue Cross Blue Shield, Claim Management Services, Inc. Operations, a Division of Wellpoint, Inc., Green Bay, WI; Notice... former workers of Anthem Blue Cross Blue Shield, Claim Management Services, Inc. Operations, a Division...

  5. Fabrication of polyurethane and polyurethane based composite fibres by the electrospinning technique for soft tissue engineering of cardiovascular system.

    Science.gov (United States)

    Kucinska-Lipka, J; Gubanska, I; Janik, H; Sienkiewicz, M

    2015-01-01

    Electrospinning is a unique technique, which provides forming of polymeric scaffolds for soft tissue engineering, which include tissue scaffolds for soft tissues of the cardiovascular system. Such artificial soft tissues of the cardiovascular system may possess mechanical properties comparable to native vascular tissues. Electrospinning technique gives the opportunity to form fibres with nm- to μm-scale in diameter. The arrangement of obtained fibres and their surface determine the biocompatibility of the scaffolds. Polyurethanes (PUs) are being commonly used as a prosthesis of cardiovascular soft tissues due to their excellent biocompatibility, non-toxicity, elasticity and mechanical properties. PUs also possess fine spinning properties. The combination of a variety of PU properties with an electrospinning technique, conducted at the well tailored conditions, gives unlimited possibilities of forming novel polyurethane materials suitable for soft tissue scaffolds applied in cardiovascular tissue engineering. This paper can help researches to gain more widespread and deeper understanding of designing electrospinable PU materials, which may be used as cardiovascular soft tissue scaffolds. In this paper we focus on reagents used in PU synthesis designed to increase PU biocompatibility (polyols) and biodegradability (isocyanates). We also describe suggested surface modifications of electrospun PUs, and the direct influence of surface wettability on providing enhanced biocompatibility of scaffolds. We indicate a great influence of electrospinning parameters (voltage, flow rate, working distance) and used solvents (mostly DMF, THF and HFIP) on fibre alignment and diameter - what impacts the biocompatibility and hemocompatibility of such electrospun PU scaffolds. Moreover, we present PU modifications with natural polymers with novel approach applied in electrospinning of PU scaffolds. This work may contribute with further developing of novel electrospun PUs, which may be

  6. Septal graft in laryngeal reconstruction

    International Nuclear Information System (INIS)

    Bahannan, Abdulrahman; Slavicek, A.; Taudy, M.; Chovanec, M.

    2006-01-01

    A 62-year-old woman presented with symptoms of dyspnea. Ultrasonography and computed tomography examinations revealed mass extending from the cricoid cartilage to the left lobe of thyroid gland and thyroid cartilage. Cytology revealed possibility of cartilaginous origin, which was proven to be chondrosarcoma (Grade 1) from the biopsy specimen obtained during panendosopy. She underwent one stage radical resection and immediate reconstruction of laryngeal skeleton defect by mucocartilaginous graft from the nasal septum. Her postoperative course was optimal with preservation of the laryngeal functions. Twenty-eight months postoperatively, she had to undergo total laryngectomy as a salvage procedure for the advanced local recurrence. We report on the relatively easy technique for functional reconstruction of the large laryngeal defect with the employment cartilage graft from the nasal septum. (author)

  7. The grafting of a thin layer of poly(sodium styrene sulfonate) onto poly(ε-caprolactone) surface can enhance fibroblast behavior

    Science.gov (United States)

    Rohman, Géraldine; Huot, Stéphane; Vilas-Boas, Maria; Radu-Bostan, Gabriela; Castner, David G.; Migonney, Véronique

    2015-01-01

    Poly(sodium styrene sulfonate) (pNaSS) was grafted onto poly(ε-caprolatone) (PCL) surfaces via ozonation and graft polymerization. The effect of ozonation and polymerization time, as well as the Mohr’s salt concentration in the grafting solution, on the degree of grafting was investigated. The degree of grafting was determined through toluidine blue staining. The surface chemical change was characterized by attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), energy-dispersive X-ray spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS). The result demonstrated that the grafting did not induce any degradation of PCL, and that pNaSS was grafted onto PCL as a thin and covalently stable layer. Furthermore, the modified PCL surface reveals a significant increase in the metabolic activity of fibroblastic cells, as well as a better cell spreading with higher adhesion strength. Consequently, bioactivity of PCL is greatly enhanced by immobilizing a thin layer of pNaSS onto its surface. The grafting of pNaSS is a promising approach to increase the bioactivity of PCL-based materials used in tissue engineering applications, such as ligament reconstruction. PMID:26155977

  8. The Physics of the Blues

    Science.gov (United States)

    Gibson, J. Murray

    2009-03-01

    In looking at the commonalities between music and science, one sees that the musician's palette is based on the principles of physics. The pitch of a musical note is determined by the frequency of the sound wave. The scales that musicians use to create and play music can be viewed as a set of rules. What makes music interesting is how musicians develop those rules and create ambiguity with them. I will discuss the evolution of western musical scales in this context. As a particular example, ``Blue'' notes are very harmonic notes that are missing from the equal temperament scale. The techniques of piano blues and jazz represent the melding of African and Western music into something totally new and exciting. Live keyboard demonstrations will be used. Beyond any redeeming entertainment value the talk will emphasize the serious connections between science and art in music. Nevertheless tips will be accepted.

  9. Thermoluminescence (TL) of Egyptian Blue

    Energy Technology Data Exchange (ETDEWEB)

    Schvoerer, M.; Delavergne, M.-C.; Chapoulie, R.

    1988-01-01

    Egyptian Blue is a synthesized crystalline pictorial pigment with formula CaCuSi/sub 4/O/sub 10/. It has been used in Egypt and Mesopotamia from the 3rd millenium B.C. A preliminary experiment on a recently synthesized sample showed that this pigment is thermoluminescent after ..beta.. irradiation (/sup 90/Sr). As the signal intensity grows linearly with the administered dose within the temperature range commonly used in TL dating, we have been looking for this phenomenon from archaeological pigments. It was encountered with two samples found in excavation. From its intensity and stability we concluded that Egyptian Blue can be dated using TL. This first and positive result encouraged us to extend the method to other types of mineral pigments synthesized by early man, and to suggest that it may be used for direct dating of ancient murals.

  10. Graft versus host disease prophylaxis

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. Graft versus host disease prophylaxis. Cyclosporine -2.5mg/KG IV over 4 hrs q12h. - 5mg/Kg BD orally for 6 months - taper- stop at one year if no GVHD. Methotrexate :INITIAL. day +1- 15mg/m2; day + 3, 6, 11- 10 mg/m2; :CURRENT; day +1-10mg/m2; day + 3,6,11 ...

  11. Blue breath holding is benign.

    OpenAIRE

    Stephenson, J B

    1991-01-01

    In their recent publication in this journal, Southall et al described typical cyanotic breath holding spells, both in otherwise healthy children and in those with brainstem lesions and other malformations. Their suggestions regarding possible autonomic disturbances may require further study, but they have adduced no scientific evidence to contradict the accepted view that in the intact child blue breath holding spells are benign. Those families in which an infant suffers an 'apparently life t...

  12. Galaxies on the Blue Edge

    OpenAIRE

    Cabanela, J. E.; Dickey, J. M.

    2002-01-01

    We have successfully constructed a catalog of HI-rich galaxies selected from the Minnesota Automated Plate Scanner Catalog of the Palomar Observatory Sky Survey (POSS I) based solely on optical criteria. We identify HI-rich candidates by selecting the bluest galaxies at a given apparent magnitude, those galaxies on the "blue edge" of POSS I color-magnitude parameter space. Subsequent 21-cm observations on the upgraded Arecibo 305m dish detected over 50% of the observed candidates. The detecte...

  13. Cellulose based cationic adsorbent fabricated via radiation grafting process for treatment of dyes waste water.

    Science.gov (United States)

    Goel, Narender Kumar; Kumar, Virendra; Misra, Nilanjal; Varshney, Lalit

    2015-11-05

    A cationized adsorbent was prepared from cellulosic cotton fabric waste via a single step-green-radiation grafting process using gamma radiation source, wherein poly[2-(methacryloyloxy) ethyl]trimethylammonium chloride (PMAETC) was covalently attached to cotton cellulose substrate. Radiation grafted (PMAETC-g-cellulose) adsorbent was investigated for removal of acid dyes from aqueous solutions using two model dyes: Acid Blue 25 (AB25) and Acid Blue 74 (AB74). The equilibrium adsorption data was analyzed by Langmuir and Freundlich isotherms, whereas kinetic data was analyzed by pseudo first order, pseudo second order, intra particle diffusion and Boyd's models. The PMAETC-g-cellulose adsorbent with 25% grafting yield exhibited equilibrium adsorption capacities of ∼ 540.0mg/g and ∼ 340.0mg/g for AB25 and AB74, respectively. Linear and nonlinear fitting of adsorption data suggested that the equilibrium adsorption process followed Langmuir adsorption isotherm model, whereas, the kinetic adsorption process followed pseudo-second order model. The multi-linearities observed in the intra-particle kinetic plots suggested that the intraparticle diffusion was not the only rate-controlling process in the adsorption of acid dyes on the adsorbent, which was further supported by Boyd's model. The adsorbent could be regenerated by eluting the adsorbed dye from the adsorbent and could be repeatedly used. Copyright © 2015 Elsevier Ltd. All rights reserved.

  14. Blue light regulated shade avoidance.

    Science.gov (United States)

    Keuskamp, Diederik H; Keller, Mercedes M; Ballaré, Carlos L; Pierik, Ronald

    2012-04-01

    Most plants grow in dense vegetation with the risk of being out-competed by neighboring plants. These neighbors can be detected not only through the depletion in light quantity that they cause, but also through the change in light quality, which plants perceive using specific photoreceptors. Both the reduction of the red:far-red ratio and the depletion of blue light are signals that induce a set of phenotypic traits, such as shoot elongation and leaf hyponasty, which increase the likelihood of light capture in dense plant stands. This set of phenotypic responses are part of the so called shade avoidance syndrome (SAS). This addendum discusses recent findings on the regulation of the SAS of Arabidopsis thaliana upon blue light depletion. Keller et al. and Keuskamp et al. show that the low blue light attenuation induced shade avoidance response of seedling and rosette-stage A. thaliana plants differ in their hormonal regulation. These studies also show there is a regulatory overlap with the R:FR-regulated SAS.

  15. Randomized intubation with polyurethane or conical cuffs to prevent pneumonia in ventilated patients.

    Science.gov (United States)

    Philippart, François; Gaudry, Stéphane; Quinquis, Laurent; Lau, Nicolas; Ouanes, Islem; Touati, Samia; Nguyen, Jean Claude; Branger, Catherine; Faibis, Frédéric; Mastouri, Maha; Forceville, Xavier; Abroug, Fekri; Ricard, Jean Damien; Grabar, Sophie; Misset, Benoît

    2015-03-15

    The occurrence of ventilator-associated pneumonia (VAP) is linked to the aspiration of contaminated pharyngeal secretions around the endotracheal tube. Tubes with cuffs made of polyurethane rather than polyvinyl chloride or with a conical rather than a cylindrical shape increase tracheal sealing. To test whether using polyurethane and/or conical cuffs reduces tracheal colonization and VAP in patients with acute respiratory failure. We conducted a multicenter, prospective, open-label, randomized study in four parallel groups in four intensive care units between 2010 and 2012. A cohort of 621 patients with expected ventilation longer than 2 days was included at intubation with a cuff composed of cylindrical polyvinyl chloride (n = 148), cylindrical polyurethane (n = 143), conical polyvinyl chloride (n = 150), or conical polyurethane (n = 162). We used Kaplan-Meier estimates and log-rank tests to compare times to events. After excluding 17 patients who secondarily refused participation or had met an exclusion criterion, 604 were included in the intention-to-treat analysis. Cumulative tracheal colonization greater than 10(3) cfu/ml at Day 2 was as follows (median [interquartile range]): cylindrical polyvinyl chloride, 0.66 (0.58-0.74); cylindrical polyurethane, 0.61 (0.53-0.70); conical polyvinyl chloride, 0.67 (0.60-0.76); and conical polyurethane, 0.62 (0.55-0.70) (P = 0.55). VAP developed in 77 patients (14.4%), and postextubational stridor developed in 28 patients (6.4%) (P = 0.20 and 0.28 between groups, respectively). Among patients requiring mechanical ventilation, polyurethane and/or conically shaped cuffs were not superior to conventional cuffs in preventing tracheal colonization and VAP. Clinical trial registered with clinicaltrials.gov (NCT01114022).

  16. Evaluation of early coronary graft patency after coronary artery bypass graft surgery using multislice computed tomography angiography

    Directory of Open Access Journals (Sweden)

    Raissi Kamal

    2009-12-01

    Full Text Available Abstract Background Coronary artery bypass graft (CABG surgery is the standard of care in the treatment of advanced coronary artery disease, and its long-term results are affected by the failure of bypass grafts. The aim of the present study was to evaluate the early patency rate in coronary bypass grafts. Methods A total of 107 consecutive patients who underwent CABG were included in this study. Early graft patency was evaluated via computed tomography (CT angiography in the first week after surgery. Results There were a total of 366 grafts, comprised of 250 venous grafts and 116 arterial grafts. Multi-slice CT detected acute graft occlusions in 32 (8.7% of all the grafts, including 26 (10% of the 250 venous grafts and 6 (5% of the 116 arterial grafts. The patency rates obtained were 97.3% for the left internal mammary (IMA grafts, 50% for the radial artery grafts, and 50% for the right IMA grafts. Additionally, 107 (96.4% grafts to the left anterior descending artery (LAD were classified as patent, whereas 1 (30% of the 3 grafts in the left circumflex (LCX region and 1 (50% of the 2 grafts in the right coronary artery (RCA territory were found to be occluded. In the venous category, 8 (13.7% of the 58 grafts to LAD were found to be occluded. In the LCX region, 9 (8.5% of the 106 grafts were classified as occluded, while the remaining 97 (91.5% grafts were patent. The venous grafts to RCA were occluded in 9 (10.4% of the 86 grafts. Amongst the multiple preoperative, intraoperative, and postoperative factors, pump time was significantly longer in the patients with occluded grafts than in those with patent grafts (P = 0.04. Conclusion The IMA grafts had the highest early patency rate amongst the coronary bypass grafts. However, the other arterial grafts were associated with a high rate of acute occlusions.

  17. Fixation of tibial plateau fractures with synthetic bone graft versus natural bone graft: a comparison study.

    LENUS (Irish Health Repository)

    Ong, J C Y

    2012-06-01

    The goal of this study was to determine differences in fracture stability and functional outcome between synthetic bone graft and natural bone graft with internal fixation of tibia plateau metaphyseal defects.

  18. Multiblock thermoplastic polyurethanes for biomedical and shape memory applications

    Science.gov (United States)

    Gu, Xinzhu

    Polyurethanes are a class of polymers that are capable of tailoring the overall polymer structure and thus final properties by many factors. The great potential in tailoring polymer structures imparts PUs unique mechanical properties and good cytocompatibility, which make them good candidates for many biomedical devices. In this dissertation, three families of multiblock thermoplastic polyurethanes are synthesized and characterized for biomedical and shape memory applications. In the first case described in Chapters 2, 3 and 4, a novel family of multiblock thermoplastic polyurethanes consisting of poly(ɛ-caprolactone) (PCL) and poly(ethylene glycol) (PEG) are presented. These materials were discovered to be very durable, with strain-to-break higher than 1200%. Heat-triggered reversible plasticity shape memory (RPSM) was observed, where the highly deformed samples completely recovered their as-cast shape within one minute when heating above the transition temperature. Instead of conventional "hard" blocks, entanglements, which result from high molecular weight, served as the physical crosslinks in this system, engendering shape recovery and preventing flow. Moreover, water-triggered shape memory effect of PCL-PEG TPUs is explored, wherein water permeated into the initially oriented PEG domains, causing rapid shape recovery toward the equilibrium shape upon contact with liquid water. The recovery behavior is found to be dependent on PEG weight percentage in the copolymers. By changing the material from bulk film to electrospun fibrous mat, recovery speed was greatly accelerated. The rate of water recovery was manipulated through structural variables, including thickness of bulk film and diameter of e-spun webs. A new, yet simple shape memory cycle, "wet-fixing" is also reported, where both the fixing and recovery ratios can be greatly improved. A detailed microstructural study on one particular composition is presented, revealing the evolution of microphase

  19. Adsorption of Methylene Blue, Bromophenol Blue, and Coomassie Brilliant Blue by α-chitin nanoparticles

    Directory of Open Access Journals (Sweden)

    Solairaj Dhananasekaran

    2016-01-01

    Full Text Available Expelling of dyestuff into water resource system causes major thread to the environment. Adsorption is the cost effective and potential method to remove the dyes from the effluents. Therefore, an attempt was made to study the adsorption of dyestuff (Methylene Blue (MB, Bromophenol Blue (BPB and Coomassie Brilliant Blue (CBB by α-chitin nanoparticles (CNP prepared from Penaeus monodon (Fabricius, 1798 shell waste. On contrary to the most recognizable adsorption studies using chitin, this is the first study using unique nanoparticles of ⩽50 nm used for the dye adsorption process. The results showed that the adsorption process increased with increase in the concentration of CNP, contact time and temperature with the dyestuff, whereas the adsorption process decreased with increase in the initial dye concentration and strong acidic pH. The results from Fourier transform infrared (FTIR spectroscopy confirmed that the interaction between dyestuff and CNP involved physical adsorption. The adsorption process obeys Langmuir isotherm (R2 values were 0.992, 0.999 and 0.992 for MB, BPB and CBB, and RL value lies between 0 and 1 for all the three dyes and pseudo second order kinetics (R2 values were 0.996, 0.999 and 0.996 for MB, BPB and CBB more effectively. The isotherm and kinetic models confirmed that CNP can be used as a suitable adsorbent material for the removal of dyestuff from effluents.

  20. Development of antibacterial quaternary ammonium silane coatings on polyurethane catheters

    Czech Academy of Sciences Publication Activity Database

    Zanini, S.; Polissi, A.; Maccagni, E.A.; Dell'Orto, E.C.; Liberatore, Chiara; Riccardi, C.

    2015-01-01

    Roč. 451, Aug (2015), 78-84 ISSN 0021-9797 R&D Projects: GA MŠk EE2.3.20.0143 Grant - others:OP VK 6(XE) CZ.1.07/2.3.00/20.0143 Institutional support: RVO:68378271 Keywords : plasma-induced graft-polymerization * acrylic acid * ATR/FTIR * AFM * quaternary ammonium silane * Escherichia coli Subject RIV: BH - Optics, Masers, Lasers Impact factor: 3.782, year: 2015

  1. Novel expansion techniques for skin grafts

    Science.gov (United States)

    Kadam, Dinesh

    2016-01-01

    The quest for skin expansion is not restricted to cover a large area alone, but to produce acceptable uniform surfaces, robust engraftment to withstand mechanical shear and infection, with a minimal donor morbidity. Ease of the technique, shorter healing period and reproducible results are essential parameters to adopt novel techniques. Significant advances seen in four fronts of autologous grafting are: (1) Dermal–epidermal graft expansion techniques, (2) epidermal graft harvests technique, (3) melanocyte-rich basal cell therapy for vitiligo and (4) robust and faster autologous cell cultures. Meek's original concept that the sum of perimeter of smaller grafts is larger than the harvested graft, and smaller the graft size, the greater is the potential for regeneration is witnessed in newer modification. Further, as graft size becomes smaller or minced, these micrografts can survive on the wound bed exudate irrespective of their dermal orientation. Expansion produced by 4 mm × 4 mm sized Meek micrografts is 10-folds, similarly 0.8 mm × 0.8 mm size micrografts produce 100-fold expansion, which becomes 700-fold with pixel grafts of 0.3 mm × 0.3 mm size. Fractional skin harvest is another new technique with 700 μ size full thickness graft. These provide instant autologous non-cultured graft to cover extensive areas with similar quality of engraftment surface as split skin grafts. Newer tools for epidermal blister graft harvest quickly, with uniform size to produce 7-fold expansions with reproducible results. In addition, donor area heals faster with minimal scar. Melanocyte-rich cell suspension is utilised in vitiligo surgery tapping the potential of hair root melanocytes. Further advances in the cell culture to reduce the cultivation time and provide stronger epidermal sheets with dermal carrier are seen in trials. PMID:27274117

  2. Graft infections after surgical aortic reconstructions

    OpenAIRE

    Berger, P.

    2015-01-01

    Prosthetic vascular grafts are frequently used to reconstruct (part) of the aorta. Every surgical procedure caries a certain risk for infection and when a prosthetic aortic graft is implanted, this may lead to an aortic graft infection (AGI). Endovascular techniques have gradually replaced open surgical reconstructions as first line of treatment for aorto-iliac diseases. Nowadays, open reconstructions are primarily reserved for patients unsuitable for endovascular reconstructions or for redo ...

  3. Outcomes of AV Fistulas and AV Grafts after Interventional Stent-Graft Deployment in Haemodialysis Patients.

    Science.gov (United States)

    Schmelter, Christopher; Raab, Udo; Lazarus, Friedrich; Ruppert, Volker; Vorwerk, Dierk

    2015-08-01

    The study was designed to assess outcomes of arteriovenous (AV) accesses after interventional stent-graft deployment in haemodialysis patients. 63 haemodialysis patients with 66 AV fistulas and AV grafts were treated by interventional stent-graft deployment from 2006 to 2012 at our hospital. Data of these patients were retrospectively analysed for location of deployed stent-grafts, occurrence and location of (re-)stenosis and (re-)thrombosis. Complex stenosis was the most frequent indication for stent-graft deployment (45.5%), followed by complications of angioplasty with vessel rupture or dissection (31.8%). A high rate of procedural success was achieved (98.5%). The most frequent location of the deployed stent-graft was the draining vein (66.7%). Stent-graft deployment was more frequent in AV grafts than in AV fistulas. Primary patency was 45.5% at 6 month, 31.3% at 12 month and 19.2% at 24 month. Primary patency was significantly better for AV fistulas than for AV grafts with deployed stent-grafts. Patency of the deployed stent-graft was much better than overall AV access primary patency with deployed stent-graft. Re-stenosis with thrombosis was the most frequent indication for re-intervention. Most frequent location of re-stenosis was the draining vein (37.1%), followed by stenosis at the AV access (29.5%) and the deployed stent-graft (23.5%). Re-stenosis and re-thrombosis remain frequent in AV fistulas and AV grafts in haemodialysis patients despite stent-graft deployment. Re-stenosis of the deployed stent-graft is, only in the minority of the cases, responsible for AV access dysfunction.

  4. Outcomes of AV Fistulas and AV Grafts after Interventional Stent-Graft Deployment in Haemodialysis Patients

    Energy Technology Data Exchange (ETDEWEB)

    Schmelter, Christopher, E-mail: christopher.schmelter@klinikum-ingolstadt.de; Raab, Udo, E-mail: udo.raab@klinikum-ingolstadt.de [Klinikum Ingolstadt, Department of Diagnostic and Interventional Radiology (Germany); Lazarus, Friedrich, E-mail: friedrich.lazarus@klinikum-ingolstadt.de [Klinikum Ingolstadt, Department of Nephrology (Germany); Ruppert, Volker, E-mail: volker.ruppert@klinikum-ingolstadt.de [Klinikum Ingolstadt, Department of Vascular Surgery (Germany); Vorwerk, Dierk, E-mail: dierk.vorwerk@klinikum-ingolstadt.de [Klinikum Ingolstadt, Department of Diagnostic and Interventional Radiology (Germany)

    2015-08-15

    PurposeThe study was designed to assess outcomes of arteriovenous (AV) accesses after interventional stent-graft deployment in haemodialysis patients.Materials and Methods63 haemodialysis patients with 66 AV fistulas and AV grafts were treated by interventional stent-graft deployment from 2006 to 2012 at our hospital. Data of these patients were retrospectively analysed for location of deployed stent-grafts, occurrence and location of (re-)stenosis and (re-)thrombosis. Complex stenosis was the most frequent indication for stent-graft deployment (45.5 %), followed by complications of angioplasty with vessel rupture or dissection (31.8 %).ResultsA high rate of procedural success was achieved (98.5 %). The most frequent location of the deployed stent-graft was the draining vein (66.7 %). Stent-graft deployment was more frequent in AV grafts than in AV fistulas. Primary patency was 45.5 % at 6 month, 31.3 % at 12 month and 19.2 % at 24 month. Primary patency was significantly better for AV fistulas than for AV grafts with deployed stent-grafts. Patency of the deployed stent-graft was much better than overall AV access primary patency with deployed stent-graft. Re-stenosis with thrombosis was the most frequent indication for re-intervention. Most frequent location of re-stenosis was the draining vein (37.1 %), followed by stenosis at the AV access (29.5 %) and the deployed stent-graft (23.5 %).ConclusionRe-stenosis and re-thrombosis remain frequent in AV fistulas and AV grafts in haemodialysis patients despite stent-graft deployment. Re-stenosis of the deployed stent-graft is, only in the minority of the cases, responsible for AV access dysfunction.

  5. Synthesis of perm-selective membranes by grafting acrylic acid into air-irradiated Teflon-FEP films

    Science.gov (United States)

    Bozzi, Annick; Chapiro, Adolphe

    Grafting acrylic acid into air-irradiated Teflon-FEP films was investigated. Pre-irradiation doses ranged from 0.5 to 10 kGy. Grafting occurred at 45 or 60°C. Homopolymerization inhibitors, ferrous ions or methylene blue, were added to the system. It was found that after completion of the reaction, within 40-100 min, membranes were obtained with very low electric resistivities. The influence of added inhibitors, pre-irradiation dose and grafting temperature was studied. From the results it is concluded that the initiating centers in air-irradiated Teflon-FEP are, on the one hand, peroxides of structure POOP', in which P is a polymeric radical and Pprime; a small fragment, and on the other trapped PO .2 radicals. The latter only react after losing their oxygen. In the presence of polymerization inhibitors, initiation involves a redox process which reduces the overall activation energy.

  6. The autologus graft of epithelial tissue culture

    Directory of Open Access Journals (Sweden)

    Minaee B

    1999-08-01

    Full Text Available With the intention of research about culture and autologus graft of epithelial tissue we used 4 french Albino Rabbits with an average age of 2 months. After reproduction on the support in EMEM (Eagle's Minimum Essential Medium we used this for graft after 4 weeks. This region which grafted total replaced. After fixation of this sample and passing them through various process, histological sections were prepared. These sections were stained with H & E and masson's trichrome and studied by light microscope. We succeeded in graft. We hope in the near future by using the method of epithelium tissue culture improving to treat burned patients.

  7. Modification of epoxy resins with thermoplastic segmented polycarbonate-based polyurethanes

    Directory of Open Access Journals (Sweden)

    Pavličević Jelena

    2014-01-01

    Full Text Available In this work, epoxy hybrid materials were synthesized by addition of thermoplastic segmented aliphatic polyurethanes with good elastic properties. The modified epoxy samples were obtained by curing of previously homogenized mixture of prepared polyurethane melts, epoxy resin and crosslinking agent Jeffamine D-2000. The influence of different weight content of polyurethanes (5, 10 and 15 wt. % compared to pure epoxy resin as well the influence of different hard segments of elastomers (20, 25 and 30 wt. % on the curing of modified epoxy systems was studied. The curing was followed by differential scanning calorimetry (DSC, in dynamic regime from 30 to 300°C, at three heating rates (5, 10 and 20°C/min. With the increase of hard segments content of polyurethanes added in higher concentration (10 and 15 wt. % into epoxy matrix, the temperature of maximum ratio of curing was shifted to lower values (from 205 to 179°C. Obtained DSC data were analyzed using two integral methods (Ozawa-Flynn-Wall and Kissinger-Akahira-Sunose and one differential kinetic model (Friedman. The significant differences were observed in the second part of the epoxy curing (for the reaction degrees higher than 60 %, where the values of activation energies remarkably increase. The addition of polyurethane elastomers retarded the curing process due to decreased mobility of reactant molecules caused by higher viscosity of reaction mixture. By detailed analysis of determined kinetic parameters, it is concluded that the influence of slow diffusion is more pronounced in the presence of thermoplastic polycarbonate-based polyurethanes, which confirmed their effect on the mechanism of epoxy curing. The highest tensile strength and hardness showed the DGEBA modified with the polyurethane with highest hard segment content. Increasing the hard segment content of polyurethane and its concentration in matrix, the tensile strength of modified epoxy was increased. The elongation at break of

  8. The in vitro viability and growth of fibroblasts cultured in the presence of different bone grafting materials (NanoBone and Straumann Bone Ceramic).

    Science.gov (United States)

    Kauschke, E; Rumpel, E; Fanghänel, J; Bayerlein, T; Gedrange, T; Proff, P

    2006-02-01

    Different clinical applications, including dentistry, are making increasing demands on bone grafting material. In the present study we have analysed the viability, proliferation and growth characteristics of fibroblasts cultured in vitro together with two different bone grafting materials, NanoBone and Straumann Bone Ceramic, over a period of 24 and 28 days respectively. Viability was measured at least every 72 hours by using the alamarBlue assay, a test that measures quantitatively cell proliferation and viability but does not require cell fixation or extraction. After one week of culture fibroblast viability was as high as in controls for both grafting materials and remained high (> 90%) for the duration of the experiment. Cell growth was evaluated microscopically. Scanning electron microscopy revealed a dense fibroblast growth at the surface of both bone grafting materials after three weeks of in vitro culture. Generally, our in vitro analyses contribute to further insights into cell - scaffold interactions.

  9. The Effects of Aluminium Hydroxide and Magnesium Hydroxide on the Mechanical Properties of Thermoplastic Polyurethane Materials

    Directory of Open Access Journals (Sweden)

    Erkin Akdoğan

    2015-12-01

    Full Text Available Thermoplastic polyurethane materials are widely used in automotive, clothing, electrical and electronics, medical, construction, machine industry due to excellent physical and chemical properties. Thermoplastic polyurethane materials combustion and resistance to high temperature characteristics are poor. Additives and fillers are added into the polyurethane matrix to improve those properties. Particularly adding these agents as a flame retardant are affect mechanical properties of polyurethane materials. Therefore, it is important to determinate the mechanical properties of these materials. In this study, 5% by weight of the thermoplastic polyurethane material, aluminium tri hydroxide (ATH, (Al2O3 3H2O and magnesium hydroxide (MgOH, (Mg(OH2 were added. Ammonium polyphosphate (APP as an intumescent flame retardant with inorganic flame retardants were added to increase the flame resistance of produced composite structure. Tensile test, tear test, hardness and Izod impact tests were made and compared of those produced composites. As a result of experiments the addition of ATH has lowered the tensile strength and tear strength contrast to this the addition of MgOH has improved those properties. Hardness and Izod impact test results were showed that both of the additives have no negative effect.

  10. The Effect of Plant Source on the Structural Properties of Lignin-based Polyurethane Blends

    Science.gov (United States)

    Lang, Jason; Dadmun, Mark

    The development of polyurethane materials based on incorporating lignin from a variety of plant sources (softwood, hardwood, and non-wood) were synthesized. Further experiments study the physical properties of the resulting lignin-based polyurethane as a function of the lignin structure, which varies with plant source. Here, we report the effect that internal crosslinking of the lignin structure has on the modulus, hardness, glass transition temperature, and thermal decomposition of the synthesized lignin-based polyurethane composites. The lignins used in this work were a softwood kraft lignin, hardwood lignosulfonate, and a wheat straw soda lignin. The lignin, acting as a polyol and the hardblock segment, reacts with TDI-endcapped PPG (2,300 MN) as the rubbery softblock component to produce lignin-based polyurethanes with varying lignin content (10, 20, 30, 40, 50, and 60 wt%). Results show that the wheat straw lignin provides the superior mechanical properties and thermal resistance. These properties are correlated to the two-phase morphology of the resultant polyurethane.

  11. The Use of Biodiesel Residues for Heat Insulating Biobased Polyurethane Foams

    Directory of Open Access Journals (Sweden)

    Nihan Özveren

    2017-01-01

    Full Text Available The commercial and biobased polyurethane foams (PUF were produced and characterized in this study. Commercial polyether polyol, crude glycerol, methanol-free crude glycerol, and pure glycerol were used as polyols. Crude glycerol is byproduct of the biodiesel production, and it is a kind of biofuel residue. Polyol blends were prepared by mixing the glycerol types and the commercial polyol with different amounts, 10 wt%, 30 wt%, 50 wt%, and 80 wt%. All types of polyol blends were reacted with polymeric diphenyl methane diisocyanates (PMDI for the production of rigid foams. Thermal properties of polyurethane foams are examined by thermogravimetric analysis (TGA and thermal conductivity tests. The structures of polyurethane foams were examined by Fourier Transformed Infrared Spectroscopy (FTIR. Changes in morphology of foams were investigated by Scanning Electron Microscopy (SEM. Mechanical properties of polyurethane foams were determined by compression tests. This study identifies the critical aspects of polyurethane foam formation by the use of various polyols and furthermore offers new uses of crude glycerol and methanol-free crude glycerol which are byproducts of biodiesel industry.

  12. Nanostructure to microstructure self-assembly of aliphatic polyurethanes: the effect on mechanical properties.

    Science.gov (United States)

    Mishra, Abhinay; Aswal, Vinod K; Maiti, Pralay

    2010-04-29

    We report the step by step self-assembly from nanostructure to microstructure (bottom-up approach through X-ray diffraction (1.6 nm), small angle neutron scattering (SANS) (11.6 nm), atomic force microscopy (70 nm smaller crystallite from enlarged image and 450 nm greater crystallites), and polarizing optical microscope (2 microm)) of aliphatic polyurethanes (PU) in contrast to aromatic polyurethanes depending on hard segment content (HSC). Polyurethanes of 10 to 80% HSC have been synthesized by using appropriate amount of polyol and chain extender. The effect of self-assembled patterns on mechanical properties both in solid and liquid state has been established exhibiting structure-property relationship of supramolecular polyurethanes. The crystallinity enhances but the degradation temperature decreases with increasing HSC. The characteristic length (measure of gap between lamellar crystallites), as revealed from SANS, gradually decreases with increasing HSC suggesting compactness of the crystallites through extensive hydrogen bonding. The Young's modulus increases with increasing HSC with a percolation threshold of hard segment (50%) while the toughness improves up to 30% HSC followed by gradual decrease in presence of bigger crystallites which promote brittle fracture. The origin of self-assembly in aliphatic PUs has been demonstrated through electronic structure calculations to form a loop structure with minimum intermolecular distance (2.2 A) while that distance is quite large in aromatic polyurethanes (4.6 A) that cannot form hydrogen bonds. The unique splintering of domain structure and its subsequent reformation under dynamic shear experiment has been established.

  13. Sub-Surface and Bulk Creep Behaviour of Polyurethane/Clay Nanocomposites.

    Science.gov (United States)

    Jin, J; Yusoh, K; Zhang, H X; Song, M

    2016-03-01

    A series of exfoliated and intercalated polyurethane organoclay nanocomposites were prepared by in situ polymerization of polyol/organoclay mixture, chain extender and diisocyanate. The creep behaviour of subsurface and bulk of the polyurethane coatings was investigated by nanoindentation technique and uniaxial conventional creep testing method, respectively. The results showed that the creep resistance of the nanocomposites was significantly improved by incorporation of organoclay. The enhancement of creep resistance was dependent on clay content as well as organoclay structure (exfoliation or intercalation) in the polymer matrix. With 1 wt% organoclay, the creep resistance increased by about 50% for the intercalated organoclay and 6% for the exfoliated organoclay systems, respectively, compared to the pristine polyurethane. Viscoelastic model was employed to investigate the effect of organoclay loadings on the creep performance of the polyurethane. Results showed the model was in good agreement with the experimental data. Incorporation of clay leads to an increase in elastic deformation especially in exfoliated polyurethane nanocomposites and induces a higher initial displacement at the early stage of creep.

  14. Synthesis and Characterization of Soy-Based Polyurethane Foam with Utilization of Ethylene Glycol in Polyol

    Directory of Open Access Journals (Sweden)

    Flora Elvistia Firdaus

    2014-08-01

    Full Text Available The use of vegetable oils on replacing petroleum has attracted attention of many researchers. The chemical structure of vegetable oils are different from petrochemicals, so the structure of soybean oil has to be chemicallymodified through its unsaturated fatty acid chain in triglyceride. Atwo step process was conducted for the preparationof soy-polyol in designated temperatures; 50 °C, 60 °C, and 70 °C. Ethylene glycol (EG as co-reagent was taking part in soy-polyol synthesis, and the soy-polyol was used as a sole polyol for polyurethane synthesis. Referred to the previous study, the existence of EG in polyurethane synthesis can improved physical properties of polyurethane foam. The aim of this research is using soy-derived polyol for petro-polyol replacement aligned with drop-off of petro-derived reagent; EG. One step process was applied for the foam synthesis.The ingredients for foam synthesis; soy-polyol, Toluene diisocyanate (TDI: a mixture of 2.4 and 2.6 isomers in ratio of 80:20 (TDI T-80, surfactant, and distilled water. The synergize of stoichiometry ratio of co-reagent EG to soy-epoxide with best temperature, with the absence of EG in polyurethane formula can produce an ultimate property of polyurethane foam. 

  15. The investigation reaction kinetic for polyurethanes based on different types of diisocyanate and castor oil

    Directory of Open Access Journals (Sweden)

    Ristić Ivan S.

    2012-01-01

    Full Text Available The formation of polyurethanes based on vegetable oils is very complex and thus for industrial production of this materials it is important to determine the optimal temperature for polymerisation and finally to obtain materials with the proper mechanical properties. The goal of this work was to assess the kinetic of catalysed and noncatalysed reactions for polyurethanes based on castor oil as the polyol component and different types of diisocyanates. Due to the presences of hydroxyl groups on ricinoleic acid, castor oil is suitable for polyurethane preparation. The differential scanning calorimetry has been employed to study the polyurethane formation reaction using Ozawa isoconversion method. It was estimated that the catalyst addition decreases the activation energy. The highest reduction of activation energy was observed for the reactive systems with hexamethylene diisocyanate. Validity of obtained kinetic model was examined by FTIR spectroscopy following the apsorption of reactive groups. Obtained results of mechanical characteristics of the polyuretahane networks (with different NCO/OH ratio confirmed that applied method could be used for prediction of optimal reaction condition in polyurethane networks synthesis.

  16. Fabrication of superhydrophobic polyurethane/organoclay nano-structured composites from cyclomethicone-in-water emulsions

    International Nuclear Information System (INIS)

    Bayer, I.S.; Steele, A.; Martorana, P.J.; Loth, E.

    2010-01-01

    Nano-structured polyurethane/organoclay composite films were fabricated by dispersing moisture-curable polyurethanes and fatty amine/amino-silane surface modified montmorillonite clay (organoclay) in cyclomethicone-in-water emulsions. Cyclomethicone Pickering emulsions were made by emulsifying decamethylcyclopentasiloxane (D 5 ), dodecamethylcyclohexasiloxane (D 6 ) and aminofunctional siloxane polymers with water using montmorillonite particles as emulsion stabilizers. Polyurethane and organoclay dispersed emulsions were spray coated on aluminum surfaces. Upon thermosetting, water repellent self-cleaning coatings were obtained with measured static water contact angles exceeding 155 o and low contact angle hysteresis ( o ). Electron microscopy images of the coating surfaces revealed formation of self-similar hierarchical micro- and nano-scale surface structures. The surface morphology and the coating adhesion strength to aluminum substrates were found to be sensitive to the relative amounts of dispersed polyurethane and organoclay in the emulsions. The degree of superhydrophobicity was analyzed using static water contact angles as well as contact angle hysteresis measurements. Due to biocompatibility of cyclomethicones and polyurethane, developed coatings can be considered for specific bio-medical applications.

  17. Bitumen modified with recycled polyurethane foam for employment in hot mix asphalt

    Directory of Open Access Journals (Sweden)

    Miguel Ángel Salas

    2018-01-01

    Full Text Available A wide variety of modifiers have been applied to bitumen in order to enhance their properties and performance. Among them, polymers have been mainly used. The aim of this paper is to assess the use of polyurethane foam waste as a bitumen modifier for hot mix asphalts. The polyurethane foam is a by-product of the manufacturing of polyurethane for thermal insulation. From a bitumen with a penetration grade of 50/70, various samples with percentages of waste material in weight ranging from 1% to 5% were produced and tested. Samples with 5% of waste material or more became rough and were refused due to their poor workability. A bituminous mixture with modified bitumen with a 4% of polyurethane was manufactured and compared with a sample with the same aggregates and original bitumen. Results in Marshall test showed that a mix with polymer modified bitumen yielded improvements in stability and a lower deformability. This result suggests that the employment of polyurethane foam waste is a promising bitumen modifier, contributing also to recycle waste materials.

  18. A comparison of silicone and polyurethane PICC lines and postinsertion complication rates: a systematic review.

    Science.gov (United States)

    Seckold, Tammy; Walker, Sandra; Dwyer, Trudy

    2015-01-01

    To determine postinsertion complication rate for peripherally inserted central catheters (PICCs), in particular the difference between silicone and polyurethane lines in general population groups as well as oncology and non-oncology patient groups. A systematic review of prospective and retrospective studies in the English language between January 2000 and October 2013 focusing on postinsertion complication rates for PICCs in the adult population. Joanna Briggs Institute tools were used to extract data from the final 19 articles with information collated relating to catheter type, patient type, overall complication rate, rates of infection, occlusion, dislodgment, phlebitis, thrombus and rupture. Overall, the PICCs complication rates ranged from 8 to 50%. Although both lines saw similar overall rates upon closer observation, the strengths and weaknesses of both lines are shown.Polyurethane PICC lines were found to provide lower rates of infection, dislodgment, thrombus and rupture complications.Mixed results were found with catheter line occlusions, overall averages showing polyurethane lines slightly higher rates than silicone. Oncology patients however saw opposite results.Phlebitis rates saw the largest division among the postinsertion complication rates, with 6.7% more phlebitis in the general patient group and 14.5% in the oncology group more for those with polyurethane PICC lines compared with the silicone. Both silicone and polyurethane PICC lines exhibit nearly identical overall average postinsertion compilation rates; however, it is the type of complications experienced that differ. Overall, oncology patients can expect to experience higher levels of postinsertion complications.

  19. Application Waste Sawdust as Mixed Polyurethane Insulation in Traditional Cold Storage of Fishing Vessel

    Directory of Open Access Journals (Sweden)

    Sutopo Purwono Fitri

    2017-03-01

    Full Text Available In the process of fishing it takes some supplies such as fishing equipment, instrumentation and storage of fish. The traditional fishermen of their fishing days fishing usually only bring ice cubes. Solid plastic polyurethane foam is a mixture solution of polyols and isocyanates, commonly used as an insulating material storage. From the observation waste generated being sawmill sawdust per spindle with diameter of 30 cm and a length of 1 m with 5 times sawmill, Saws 0.8 cm thick produced 0.0088 m³ / burnable logs only discarded. Therefore takes thermal conductivity test to review mixture of sawdust and polyurethane comparison with variations different dosing. Maximum disposals sawdust can be done is 40% of the total volume of material mixture, polyurethane and sawdust because composite material (sawdust-polyurethane can not be bond with good so easy slab separately from origin form. Thermal Conductivity insulating good and economical on disposals 40% wood flour (0.05252 W / m°C and is able to maintain a 2 kg of ice crystals melt up perfect on 34 hours. Operating profits economical from 4,8 m³insulation composite application with obtained Rp 4.486.000 compared with 100% Polyurethane Insulation Manufacture.

  20. Blue breath holding is benign.

    Science.gov (United States)

    Stephenson, J B

    1991-01-01

    In their recent publication in this journal, Southall et al described typical cyanotic breath holding spells, both in otherwise healthy children and in those with brainstem lesions and other malformations. Their suggestions regarding possible autonomic disturbances may require further study, but they have adduced no scientific evidence to contradict the accepted view that in the intact child blue breath holding spells are benign. Those families in which an infant suffers an 'apparently life threatening event' deserve immense understanding and help, and it behoves investigators to exercise extreme care and self criticism in the presentation of new knowledge which may bear upon their management and their morale. PMID:2001115

  1. The treatment of a polyurethane rigid foam floor piece by Ger van Elk: a study in the conservation of plastics

    NARCIS (Netherlands)

    Snijders, E.; Weerdenbrug, S.; Timmermans, R.; Bridgland, J.

    2011-01-01

    Plint serie [Baseboard Series] (1967) by the Dutch artist Ger van Elk is a floor sculpture of painted polyurethane foam in the collection of the Stedelijk Museum Amsterdam. By 2007, the artwork was in a bad state: a point had broken off and there were dents and holes in the polyurethane foam and

  2. Bio-based rigid polyurethane foam from liquefied products of wood in the presence of polyhydric alcohols

    Science.gov (United States)

    Zhifeng Zheng; Hui Pan; Yuanbo Huang; Chung Y. Hse

    2011-01-01

    Rigid polyurethane foams were prepared from the liquefied wood polyols, which was obtained by the liquefaction of southern pine wood in the presence of polyhydric alcohols with sulfuric acid catalyst by using microwave-assistant as an energy source. The properties of liquefied biomass-based polyols and the rigid polyurethane foams were investigated. The results...

  3. An all-polymer micropump based on the conductive polymer poly(3,4-ethylenedioxythiophene) and a polyurethane channel system

    DEFF Research Database (Denmark)

    Hansen, Thomas Steen; West, Keld; Hassager, Ole

    2007-01-01

    optical lithography and reactive ion etching, and dimensions down to 2 jtD) could be successfully realize·d. The channel systeDl wasm.ade froln a flexible thennoplastic polyurethane. The chosen polyurethane exhibited good sealing without the possible contanlination issues of silicones, adequate wetting...

  4. Autogenous femoral head as grafting material for mandibular augmentation

    NARCIS (Netherlands)

    Vos, M. D.; Raghoebar, G. M.; van der Wal, J. E.; Kalk, W. W. I.; Vissink, A.

    2009-01-01

    Bone grafting is commonly used for augmentation of the atrophic edentulous maxilla and mandible. Although bone substitutes and allogeneic frozen bone grafts have been applied successfully, fresh autogenous bone grafts remain the 'gold standard' in maxillofacial reconstructive surgery. A disadvantage

  5. Industrial application of electron beams for grafting and vulcanization

    International Nuclear Information System (INIS)

    Keizo Makuuchi

    1994-01-01

    The topics discussed are radiation graft polymerization; industrial application of radiation grafting - ion exchange membrane for a battery separator, ammonia adsorbent, non-flammable PE (polyethylene) foam; R and D on radiation grafting, radiation vulcanization of natural rubber

  6. Degradation of Polyester Polyurethane by Bacterial Polyester Hydrolases

    Directory of Open Access Journals (Sweden)

    Juliane Schmidt

    2017-02-01

    Full Text Available Polyurethanes (PU are widely used synthetic polymers. The growing amount of PU used industrially has resulted in a worldwide increase of plastic wastes. The related environmental pollution as well as the limited availability of the raw materials based on petrochemicals requires novel solutions for their efficient degradation and recycling. The degradation of the polyester PU Impranil DLN by the polyester hydrolases LC cutinase (LCC, TfCut2, Tcur1278 and Tcur0390 was analyzed using a turbidimetric assay. The highest hydrolysis rates were obtained with TfCut2 and Tcur0390. TfCut2 also showed a significantly higher substrate affinity for Impranil DLN than the other three enzymes, indicated by a higher adsorption constant K. Significant weight losses of the solid thermoplastic polyester PU (TPU Elastollan B85A-10 and C85A-10 were detected as a result of the enzymatic degradation by all four polyester hydrolases. Within a reaction time of 200 h at 70 °C, LCC caused weight losses of up to 4.9% and 4.1% of Elastollan B85A-10 and C85A-10, respectively. Gel permeation chromatography confirmed a preferential degradation of the larger polymer chains. Scanning electron microscopy revealed cracks at the surface of the TPU cubes as a result of enzymatic surface erosion. Analysis by Fourier transform infrared spectroscopy indicated that the observed weight losses were a result of the cleavage of ester bonds of the polyester TPU.

  7. Synthesis and Characterization of Biodegradable Polyurethane for Hypopharyngeal Tissue Engineering

    Directory of Open Access Journals (Sweden)

    Zhisen Shen

    2015-01-01

    Full Text Available Biodegradable crosslinked polyurethane (cPU was synthesized using polyethylene glycol (PEG, L-lactide (L-LA, and hexamethylene diisocyanate (HDI, with iron acetylacetonate (Fe(acac3 as the catalyst and PEG as the extender. Chemical components of the obtained polymers were characterized by FTIR spectroscopy, 1H NMR spectra, and Gel Permeation Chromatography (GPC. The thermodynamic properties, mechanical behaviors, surface hydrophilicity, degradability, and cytotoxicity were tested via differential scanning calorimetry (DSC, tensile tests, contact angle measurements, and cell culture. The results show that the synthesized cPU possessed good flexibility with quite low glass transition temperature (Tg, −22°C and good wettability. Water uptake measured as high as 229.7 ± 18.7%. These properties make cPU a good candidate material for engineering soft tissues such as the hypopharynx. In vitro and in vivo tests showed that cPU has the ability to support the growth of human hypopharyngeal fibroblasts and angiogenesis was observed around cPU after it was implanted subcutaneously in SD rats.

  8. Platelet adhesion studies on dipyridamole coated polyurethane surfaces

    Directory of Open Access Journals (Sweden)

    Aldenhoff Y. B.J.

    2003-06-01

    Full Text Available Surface modification of polyurethanes (PUs by covalent attachment of dipyridamole (Persantinregistered is known to reduce adherence of blood platelets upon exposure to human platelet rich plasma (PRP. This effect was investigated in further detail. First platelet adhesion under static conditions was studied with four different biomaterial surfaces: untreated PU, PU immobilised with conjugate molecule 1, PU immobilised with conjugate molecule 2, and PU immobilised with conjugate molecule 3. In PU immobilised with 1 dipyridamole is directly linked to the surface, in PU immobilised with 2 there is a short hydrophilic spacer chain in between the surface and the dipyridamole, while conjugate molecule 3 is merely the spacer chain. Scanning electron microscopy (SEM was used to characterise platelet adhesion from human PRP under static conditions, and fluorescence imaging microscopy was used to study platelet adhesion from whole blood under flow. SEM experiments encompassed both density measurements and analysis of the morphology of adherent platelets. In the static experiments the surface immobilised with 2 showed the lowest platelet adherence. No difference between the three modified surfaces emerged from the flow experiments. The surfaces were also incubated with washed blood platelets and labeled with Oregon-Green Annexin V. No capture of Oregon-Green Annexin V was seen, implying that the adhered platelets did not expose any phosphatidyl serine at their exteriour surface.

  9. Polyurethane Foam-Based Ultramicroporous Carbons for CO2 Capture.

    Science.gov (United States)

    Ge, Chao; Song, Jian; Qin, Zhangfeng; Wang, Jianguo; Fan, Weibin

    2016-07-27

    A series of sustainable porous carbon materials were prepared from waste polyurethane foam and investigated for capture of CO2. The effects of preparation conditions, such as precarbonization, KOH to carbon precursor weight ratio, and activation temperature, on the porous structure and CO2 adsorption properties were studied for the purpose of controlling pore sizes and nitrogen content and developing high-performance materials for capture of CO2. The sample prepared at optimum conditions shows CO2 adsorption capacities of 6.67 and 4.33 mmol·g(-1) at 0 and 25 °C under 1 bar, respectively, which are comparable to those of the best reported porous carbons prepared from waste materials. The HCl treatment experiment reveals that about 80% of CO2 adsorption capacity arises from physical adsorption, while the other 20% is due to the chemical adsorption originated from the interaction of basic N groups and CO2 molecules. The relationship between CO2 uptake and pore size at different temperatures indicates that the micropores with pore size smaller than 0.86 and 0.70 nm play a dominant role in the CO2 adsorption at 0 and 25 °C, respectively. It was found that the obtained carbon materials exhibited high recyclability and high selectivity to adsorption of CO2 from the CO2 and N2 mixture.

  10. Incorporation of Fiber Bragg Sensors for Shape Memory Polyurethanes Characterization

    Directory of Open Access Journals (Sweden)

    Nélia Alberto

    2017-11-01

    Full Text Available Shape memory polyurethanes (SMPUs are thermally activated shape memory materials, which can be used as actuators or sensors in applications including aerospace, aeronautics, automobiles or the biomedical industry. The accurate characterization of the memory effect of these materials is therefore mandatory for the technology’s success. The shape memory characterization is normally accomplished using mechanical testing coupled with a heat source, where a detailed knowledge of the heat cycle and its influence on the material properties is paramount but difficult to monitor. In this work, fiber Bragg grating (FBG sensors were embedded into SMPU samples aiming to study and characterize its shape memory effect. The samples were obtained by injection molding, and the entire processing cycle was successfully monitored, providing a process global quality signature. Moreover, the integrity and functionality of the FBG sensors were maintained during and after the embedding process, demonstrating the feasibility of the technology chosen for the purpose envisaged. The results of the shape memory effect characterization demonstrate a good correlation between the reflected FBG peak with the temperature and induced strain, proving that this technology is suitable for this particular application.

  11. Electrospun gelatin/polyurethane blended nanofibers for wound healing

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sung Eun; Heo, Dong Nyoung; Lee, Jung Bok; Kwon, Il Keun [Department of Oral Biology, School of Dentistry, Kyung Hee University, Seoul 130-701 (Korea, Republic of); Kim, Jong Ryul; Park, Sang Hyuk [Conservative Dentistry and Institute of Oral Biology, School of Dentistry, Kyung Hee University, Seoul 130-701 (Korea, Republic of); Jeon, Seong Ho, E-mail: kwoni@khu.ac.k [College of Pharmacy, Kangwon National University, Chuncheon 200-701 (Korea, Republic of)

    2009-08-15

    In this study, we prepared a blended nanofiber scaffold using synthetic and natural polymers, polyurethane (PU) and gelatin respectively, using the electrospinning method to prepare a material for wound dressing. In order to confirm the properties of this gelatin/PU blended nanofiber scaffold, we performed scanning electron microscopy, atomic force microscopy, attenuated total reflectance Fourier-transform infrared spectroscopy, thermal gravimetric analysis, contact angle, water uptake, mechanical property, recovery, and degradation tests, and cellular response. The results obtained indicate that the mean diameter of these nanofibers was uniformly electrospun and ranged from 0.4 to 2.1{mu}m. According to the results, when the amount of gelatin in the blended solution decreased, the contact angle increased and water uptake of the scaffold decreased concurrently. In the mechanical tests, the blended nanofibrous scaffolds were elastic, and elasticity increased as the total amount of PU increased. Moreover, as the total amount of gelatin increased, the cell proliferation increased with the same amount of culture time. Therefore, this gelatin/PU blended nanofiber scaffold has potential application for use as a wound dressing.

  12. Sensitivity and uncertainty analysis of a polyurethane foam decomposition model

    Energy Technology Data Exchange (ETDEWEB)

    HOBBS,MICHAEL L.; ROBINSON,DAVID G.

    2000-03-14

    Sensitivity/uncertainty analyses are not commonly performed on complex, finite-element engineering models because the analyses are time consuming, CPU intensive, nontrivial exercises that can lead to deceptive results. To illustrate these ideas, an analytical sensitivity/uncertainty analysis is used to determine the standard deviation and the primary factors affecting the burn velocity of polyurethane foam exposed to firelike radiative boundary conditions. The complex, finite element model has 25 input parameters that include chemistry, polymer structure, and thermophysical properties. The response variable was selected as the steady-state burn velocity calculated as the derivative of the burn front location versus time. The standard deviation of the burn velocity was determined by taking numerical derivatives of the response variable with respect to each of the 25 input parameters. Since the response variable is also a derivative, the standard deviation is essentially determined from a second derivative that is extremely sensitive to numerical noise. To minimize the numerical noise, 50-micron elements and approximately 1-msec time steps were required to obtain stable uncertainty results. The primary effect variable was shown to be the emissivity of the foam.

  13. Reticulation of Aqueous Polyurethane Systems Controlled by DSC Method

    Directory of Open Access Journals (Sweden)

    Jakov Stamenkovic

    2006-06-01

    Full Text Available The DSC method has been employed to monitor the kinetics of reticulation ofaqueous polyurethane systems without catalysts, and with the commercial catalyst of zirconium(CAT®XC-6212 and the highly selective manganese catalyst, the complex Mn(III-diacetylacetonemaleinate (MAM. Among the polyol components, the acrylic emulsions wereused for reticulation in this research, and as suitable reticulation agents the water emulsiblealiphatic polyisocyanates based on hexamethylendoisocyanate with the different contents ofNCO-groups were employed. On the basis of DSC analysis, applying the methods of Kissinger,Freeman-Carroll and Crane-Ellerstein the pseudo kinetic parameters of the reticulation reactionof aqueous systems were determined. The temperature of the examination ranged from 50oC to450oC with the heat rate of 0.5oC/min. The reduction of the activation energy and the increaseof the standard deviation indicate the catalytic action of the selective catalysts of zirconium andmanganese. The impact of the catalysts on the reduction of the activation energy is thestrongest when using the catalysts of manganese and applying all the three afore-said methods.The least aberrations among the stated methods in defining the kinetic parameters wereobtained by using the manganese catalyst.

  14. Electrically responsive microstructured polypyrrole-polyurethane composites for stimulated osteogenesis

    Science.gov (United States)

    Luculescu, Catalin Romeo; Acasandrei, Adriana Maria; Mustaciosu, Cosmin Catalin; Zamfirescu, Marian; Dinescu, Maria; Calin, Bogdan Stefanita; Popescu, Andrei; Chioibasu, Diana; Cristian, Dan; Paun, Irina Alexandra

    2018-03-01

    In this work, we demonstrate the efficiency of substrate-mediated electrical stimulation of micropatterned polypyrrole/polyurethane (PPy/PU) composites for enhancing the osteogenesis in osteoblast-like cells. The PPy/PU substrates were obtained by dispersing electrically conductive PPy nanograins within a mechanically resistant PU matrix. Spin-coated PPy/PU layers were micropatterned with predefined 3D geometries by ultrashort laser ablation. Then they were conformally coated by Matrix Assisted Pulsed Laser Evaporation, in order to restore their chemical and electrical integrity. The chemical structure of the laser-processed PPy/PU substrates was investigated by 2D and 3D mapping of the laser-processed areas, via Raman microspectroscopy. In vitro studies revealed that the micropatterned PPy/PU substrates facilitated the topological and electrical communication of the seeded osteoblasts. Specifically, we demonstrated the cells attachment on the predefined 3D micropatterns. More importantly, we found evidence about the cells mineralization inside the 3D micropatterns by investigating the calcium deposits by Energy-Dispersive X-Ray Spectroscopy (EDS) and Alizarin Red staining. We found that the substrate-mediated electrical stimulation of the PPy/PU substrates induced a twofold increase of the Ca deposits in the cultured cells.

  15. Use of polyurethane foam deformation sensor to record respiratory activity

    Science.gov (United States)

    Bredov, V. I.; Baranov, V. S.

    1980-05-01

    The sensor developed has some substantial advantages over other known types. It is highly sensitive over a wide range of strain loads. The level of the output signal is linearly related to the force exerted on it, and it is sufficient for direct recording without using amplifiers of electric signals. The sensor is based on elastic, spongy material, polyurethane foam (porolon) with current-conducting material on the pore surface, current-conducting carbon black or electrode paste. The elastic properties of the sensor are built in the actual base of the strain-sensitive element, which simplifies the construction substantially and increases the reliability of the unit. In order to test the possibility of using this sensor to examine respiratory function, human pneumograms were recorded with the subject in a calm state along with the respiratory activity of experimental animals (dogs). Samples of the respiratory curve are shown. The simplicity of design of the sensor makes it possible to use it in various physiological experiments.

  16. Polyol-assisted vermiculite dispersion in polyurethane nanocomposites.

    Science.gov (United States)

    Park, Yong Tae; Qian, Yuqiang; Lindsay, Chris I; Nijs, Conny; Camargo, Rafael E; Stein, Andreas; Macosko, Christopher W

    2013-04-24

    The largest use of polyurethane (PU) is as closed cell rigid foams for thermal insulation. One problem is loss of blowing gases, which leads to slow increase in thermal conductivity. PU composites with plate-like nanofillers create a diffusion barrier, reducing gas transport and slowing insulation aging. In this research, a new in situ intercalative polymerization is described to disperse vermiculite (VMT) in PU. When VMT was modified by cation exchange with long-chain quaternary ammonium, the dispersion in methylene diphenyl diisocyanate (MDI) was significantly improved. Dispersion of clay in MDI was further improved by combining high intensity dispersive mixing with a polyol-clay preblend (master-batch). The VMT dispersibility was characterized using rheology, microscopy, and X-ray scattering/diffraction. With the method of polyol-assisted VMT dispersion, electron microscopy revealed extensive intercalation and exfoliation of clay particles. In contrast, simple mixing of organoclay in MDI resulted in macroscopic localization and poor distribution of clay particles in PU. The final nanocomposites prepared by the master-batch method showed enhancement of mechanical properties (85% increase in elastic modulus) and reduction in permeability to CO2, as much as 40%, at a low clay concentration of 3.3 wt %.

  17. Aluminum phosphate microcapsule flame retardants for flexible polyurethane foams

    Science.gov (United States)

    Zhang, Bin; Liu, Hong; Han, Jian

    2018-04-01

    In this study, highly efficient flame-retardant aluminum phosphate (ALP) microcapsules were synthesized from ALP and ammonium phosphomolybdate trihydrate. The chemical structure of the ALP microcapsules was characterized by scanning electron microscopy and elemental analysis, and the thermal degradation behavior was investigated by thermogravimetric analysis (TGA). Subsequently, flexible polyurethane (PU) foams were prepared with the ALP microcapsules. Limiting oxygen index (LOI) tests, vertical burning tests, smoke density rating (SDR), and cone calorimetric tests were employed to investigate the combustion of the materials. The results showed that the flexible PU foams with 15 parts per hundred polyol by weight (pphp) ALP microcapsules passed the vertical burning test and they had an increased LOI value of 28.5%. The SDR value for PU/20 pphp ALP microcapsule composites was about 16.0% and the SDR value for the pure PU was about 29.0%. The corresponding flame-retardant mechanism was investigated by Fourier transform infrared spectroscopy, TGA, Pyrolysis Gas Chromatography Mass Spectrometry (Py-GC/MS) tests, and energy-dispersive X-ray spectrometry.

  18. Synthesis and Characteristics of Highly Oil-absorptive Expanded Polyurethane

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Y.H. [Pusan National University, Pusan (Korea); Kim, W. [Dong Ah Chem. Co. Ltd., Kyungnam (Korea); Kim, W.H. [Pusan National University, Pusan (Korea)

    2000-03-01

    Oil-absorptive expanded polyurethane (EPU) was prepared with a lypophilic polyol, polypropyleneglycol (PPG) as the soft segment, and toluenediisocyanate (TDI) and H{sub 2}O as the hard segment. PPGs having various average molecular weights (M{sub n} : 1000, 2000, 3000) were employed to investigate that the soft segment content was consequent on the oil-absorptivity and the mechanical properties of the EPUs. As M{sub n} of PPG was decreased from 3000 to 1000, the oil-absorptivity and the tensile strength of the EPUs increased from 1460 to 3010% and from 0.26 to 0.55 kg{sub f}/cm{sup 2} respectively. As the hard segment content ratio, {gamma}([NCO]/[OH]) was increased from 1.0 to 1.2, the tensile strength of the EPUs increased from 0.56 to 0.95 kg{sub f}/cm{sup 2}, due to the formation of allophanate and/or biuret bondings. However, as the surfactant (S-A) content was increased from 1.0 to 2.5 pbw, the oil-absorptivity was decreased from 3634 to 3312%, due to the formation of closed cell structures. (author). 18 refs., 4 tabs., 14 figs.

  19. Rigid Polyurethane Foams from Lignin Based-Polyols

    Science.gov (United States)

    Cateto, Carolina; Barreiro, Filomena; Rodrigues, Alírio; Belgacem, Naceur

    2008-08-01

    Rigid polyurethane (RPU) foams were synthesized using lignin-based polyols obtained by an oxypropylation process. Alcell, Indulin AT, Curan 27-11P and Sarkanda lignins have been oxypropylated using formulations deduced from an optimization study with Alcell. L/PO/C (ratio between lignin, PO and catalyst content) of 30/70/2 and 20/80/5 were used to obtain the desired polyols. The resulting RPU foams were characterized in terms of density, mechanical properties, conductivity and morphology. All Sarkanda lignin based polyols and the 30/70/2 Curan 27-11P polyol were found inadequate for RPU formulations. Alcell and Indulin AT based polyols and the 20/80/5 Curan 27-11P polyol resulted in RPU foams with properties very similar to those obtained from conventional commercial polyols. RPU foams produced with the 30/70/2 Alcell and the 30/70/2 Indulin AT polyols exhibited improved properties compared with those from 20/80/5 based formulations.

  20. In situ temperature tunable pores of shape memory polyurethane membranes

    International Nuclear Information System (INIS)

    Ahn, Joon-Sung; Yu, Woong-Ryeol; Youk, Ji Ho; Ryu, Hee Youk

    2011-01-01

    Conventional shape memory polymers, such as shape memory polyurethanes (SMPU), can exhibit net two-way shape memory behavior (2WSM), i.e., upon heating and subsequent cooling, their macroscopic shapes change reversibly under an applied bias load. This paper is aimed at reporting similar 2WSM behavior, especially by focusing on the size of nanopores/micropores in SMPU membranes, i.e., the size of the pores can be reversibly changed by up to about 300 nm upon repeated heating and cooling. The SMPU membranes were prepared by electrospinning and elongated at temperatures higher than the transition temperature of the SMPU. Under the constant stress, the size change of the pores in the membranes was measured by applying cyclic temperature change. It was observed that the pore size changed from 150 to 440 nm according to the temperature change, demonstrating that the SMPU membrane can be utilized as a smart membrane to selectively separate substances according to their sizes by just controlling temperature

  1. An overview of polyurethane foams in higher specification foam mattresses.

    Science.gov (United States)

    Soppi, Esa; Lehtiö, Juha; Saarinen, Hannu

    2015-02-01

    Soft polyurethane foams exist in thousands of grades and constitute essential components of hospital mattresses. For pressure ulcer prevention, the ability of foams to control the immersion and envelopment of patients is essential. Higher specification foam mattresses (i.e., foam mattresses that relieve pressure via optimum patient immersion and envelopment while enabling patient position changes) are claimed to be more effective for preventing pressure ulcers than standard mattresses. Foam grade evaluations should include resiliency, density, hardness, indentation force/load deflection, progressive hardness, tensile strength, and elongation along with essential criteria for higher specification foam mattresses. Patient-specific requirements may include optimal control of patient immersion and envelopment. Mattress cover characteristics should include breathability, impermeability to fluids, and fire safety and not affect mattress function. Additional determinations such as hardness are assessed according to the guidelines of the American Society for Testing and Materials and the International Organization for Standardization. At this time, no single foam grade provides an optimal combination of the above key requirements, but the literature suggests a combination of at least 2 foams may create an optimal higher specification foam mattress for pressure ulcer prevention. Future research and the development of product specification accuracy standards are needed to help clinicians make evidence-based decisions about mattress use.

  2. Polyurethane foam (PUF) passive samplers for monitoring phenanthrene in stormwater.

    Science.gov (United States)

    Dou, Yueqin; Zhang, Tian C; Zeng, Jing; Stansbury, John; Moussavi, Massoum; Richter-Egger, Dana L; Klein, Mitchell R

    2016-04-01

    Pollution from highway stormwater runoff has been an increasing area of concern. Many structural Best Management Practices (BMPs) have been implemented for stormwater treatment and management. One challenge for these BMPs is to sample stormwater and monitor BMP performance. The main objective of this study was to evaluate the feasibility of using polyurethane foam (PUF) passive samplers (PSs) for sampling phenanthrene (PHE) in highway stormwater runoff and BMPs. Tests were conducted using batch reactors, glass-tube columns, and laboratory-scale BMPs (bioretention cells). Results indicate that sorption for PHE by PUF is mainly linearly relative to time, and the high sorption capacity allows the PUF passive sampler to monitor stormwater events for months or years. The PUF passive samplers could be embedded in BMPs for monitoring influent and effluent PHE concentrations. Models developed to link the results of batch and column tests proved to be useful for determining removal or sorption parameters and performance of the PUF-PSs. The predicted removal efficiencies of BMPs were close to the real values obtained from the control columns with errors ranging between -8.46 and 1.52%. This research showed that it is possible to use PUF passive samplers for sampling stormwater and monitoring the performance of stormwater BMPs, which warrants the field-scale feasibility studies in the future.

  3. Biodegradable Synthetic Polyurethane Foam Nasal Packing After Septoplasty.

    Science.gov (United States)

    Shakeel, Muhammad; Karlsson, Therese R; Khan, Imran; Hariharadas, Bobbi; Mansoor, Rashid; Maini, Sangeeta K

    2015-06-01

    To determine the usefulness of biodegradable Synthetic Polyurethane Foam (SPF) nasal packing as an adjunct to day-case septoplasty. Comparative, observational case series. Aberdeen Royal Infirmary, University of Aberdeen, Scotland, UK, in the year 2011. One-hundred consecutive patients who underwent septoplasty and received SPF packing in 2010 were prospectively audited while one-hundred consecutive patients undergoing septoplasty in the year 2000 were studied retrospectively. Data collected include demographics, type of operation and duration of hospital stay. Excel and SPSS were used for data collection and analysis. In the year 2000, the average age of the patients was 40.6 years. There were 37 females and 63 males. One patient returned home the same day, 22 stayed one night, 69 spent two nights and 8 stayed more than two nights in hospital for their operation. The average length of stay was 1.84 nights. In 2010, the average age of patients was 37.86 years, with 31 patients being female and 69 male. All patients in this cohort received SPF packing postoperatively. Seventy-three patients went home the same day, 24 patients stayed one night and 3 patients spent two nights in hospital for their operation. Average length of hospital stay was 0.3 nights. Results were statistically significant (p < 0.001). SPF was a useful nasal packing option after septoplasty and inferior turbinate surgery, which enabled the surgeons to carry out this surgery safely as a day-case procedure.

  4. Shape Memory Polyurethanes Based on Zwitterionic Hard Segments

    Directory of Open Access Journals (Sweden)

    Shuqin Fu

    2017-09-01

    Full Text Available This work aimed at elucidating the influence of zwitterionic hard segments on the structures and properties of shape memory polyurethanes (SMPUs. A series of zwitterionic SMPUs was successfully prepared with N-methyldiethanolamine (MDEA, 1,3-propanesultone (1,3-PS, 1,6-hexamethylene diisocyanate (HDI and polyethylene glycol (PEG6000. The influence of MDEA-PS-based zwitterionic hard segment on structure, morphology, thermal property, shape memory property and cytocompatibility were systematically investigated. The results demonstrated that the PEG-based zwitterionic SMPUs (PEG-ZSMPUs formed phase separation structure consisting of crystalline soft phase and amorphous hard phase. The MDEA-PS zwitterionic segments showed a tendency to form ionic clusters in hard segments, which served as reinforced net points. Shape memory analysis showed that zwitterionic PEG-ZSMPUs containing a high content of zwitterionic segments had thermal-induced shape memory effects. Finally, cytotoxic assays demonstrated that MDEA-PS zwitterionic segment improved the biocompatibility of PEG-ZSMPUs. The zwitterionic PEG-ZSMPUs could thus have a promising application in smart biomedical fields.

  5. Modyfication of the Rigid Polyurethane-Polyisocyanurate Foams

    Directory of Open Access Journals (Sweden)

    Bogusław Czupryński

    2014-01-01

    Full Text Available The effect of polyethylene glycol 1500 on physicomechanical properties of rigid polyurethane-polyisocyanurate (PUR-PIR foams has been studied. It was found that application of polyethylene glycol 1500 for synthesis of foams in amount from 0% to 20% w/w had an effect on reduction of brittleness and softening point, while the greater the increase in compressive strength the higher its content in foam composition was. Wastes from production of these foams were ground and subjected to glycolysis in diethylene glycol with the addition of ethanolamine and zinc stearate. Liquid brown products were obtained. Properties of the resulting products were defined in order to determine their suitability for synthesis of new foams. It was found that glycolysate 6 was the most suitable for reuse and its application in different amounts allowed us to prepare 4 new foams (nos. 25, 26, 27, and 28. Properties of foams prepared in this manner were determined and, on their basis, the suitability of glycolysates for production of rigid PUR-PIR foams was evaluated.

  6. Synthesis and characterization of thermoplastic polyurethane/nanoclay composites

    Energy Technology Data Exchange (ETDEWEB)

    Pizzatto, Leandro [Autotravi Borrachas e Plasticos Ltda, Caxias do Sul (Brazil); Lizot, Analice; Fiorio, Rudinei [Departamento de Engenharia Quimica, Universidade de Caxias do Sul, Caxias do Sul (Brazil); Amorim, Cintia L.; Machado, Giovanna [Programa de Pos-Graduacao em Materiais, Universidade de Caxias do Sul, Caxias do Sul (Brazil); Giovanela, Marcelo [Departamento de Fisica e Quimica, Universidade de Caxias do Sul, Caxias do Sul (Brazil); Zattera, Ademir J. [Departamento de Engenharia Quimica, Universidade de Caxias do Sul, Caxias do Sul (Brazil); Crespo, Janaina S. [Grupo de Materiais Elastomericos, Universidade de Caxias do Sul, Caxias do Sul (Brazil)], E-mail: jscrespo@ucs.br

    2009-03-01

    In this study thermoplastic polyurethane (TPU) composites were obtained with different nanoclay contents (0, 1, 3 for all cases and 10 wt.% in some cases). The nanoclay Cloisite (registered) 30B (C30B) was dispersed in the TPU matrix by melt processing (twin-screw extruder; TPU-E composites) and during bulk polymerization (TPU-S composites). The synthesis method involved the two-step bulk polymerization of polyesterpolyol (molecular weight 2000 g mol{sup -1}) and diphenylmethanediisocyanate (MDI) with 1,4-butanediol as the chain extender. The dispersion state of the nanoclay particles and its effect on the mechanical properties of the composites, before and after ageing, was investigated. The characterization of TPU/nanoclay composites was carried out by means of scanning electron microscopy (SEM) and X-ray diffraction (XRD). The mechanical characterization was performed through determination of the tensile and tear strengths. The TPU-E 3 wt.% composite showed the best improvement with increases in stress and strain at break (28% and 35%, respectively) and energy (88%), compared to the TPU-E (sample without nanoclay)

  7. Electrospun propolis/polyurethane composite nanofibers for biomedical applications

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jeong In [Department of Bio-nano System Engineering, Chonbuk National University, Jeonju 561–756 (Korea, Republic of); Pant, Hem Raj, E-mail: hempant@jbnu.ac.kr [Department of Bio-nano System Engineering, Chonbuk National University, Jeonju 561–756 (Korea, Republic of); Department of Engineering Science and Humanities, Pulchowk Campus, Tribhuvan University, Kathmandu (Nepal); Research Institute for Next Generation, Kalanki, Kathmandu (Nepal); Sim, Hyun-Jaung [Department of Bioactive Material Science, Research Center of Bioactive Material, Chonbuk National University, Jeonju, Chonbuk (Korea, Republic of); Lee, Kang Min [Department of Molecular Biology, College of Natural Science, Chonbuk National University, Jeonju, 561–756 (Korea, Republic of); Kim, Cheol Sang, E-mail: chskim@jbnu.ac.kr [Department of Bio-nano System Engineering, Chonbuk National University, Jeonju 561–756 (Korea, Republic of)

    2014-11-01

    Tissue engineering requires functional polymeric membrane for adequate space for cell migration and attachment within the nanostructure. Therefore, biocompatible propolis loaded polyurethane (propolis/PU) nanofibers were successfully prepared using electrospinning of propolis/PU blend solution. Here, composite nanofibers were subjected to detailed analysis using electron microscopy, FT-IR spectroscopy, thermal gravimetric analysis (TGA), and mechanical properties and water contact angle measurement. FE-SEM images revealed that the composite nanofibers became point-bonded with increasing amounts of propolis in the blend due to its adhesive properties. Incorporation of small amount of propolis through PU matrix could improve the hydrophilicity and mechanical strength of the fibrous membrane. In order to assay the cytocompatibility and cell behavior on the composite scaffolds, fibroblast cells were seeded on the matrix. Results suggest that the incorporation of propolis into PU fibers could increase its cell compatibility. Moreover, composite nanofibers have effective antibacterial activity. Therefore, as-synthesized nanocomposite fibrous mat has great potentiality in wound dressing and skin tissue engineering. - Highlights: • Sufficient amount of propolis is simply loaded through PU fibers. • Propolis increases the hydrophilicity and mechanical properties of PU fibers. • Composite mat shows excellent antibacterial activity. • Small amount of propolis can enhance the cell compatibility of PU fibers.

  8. Mechanical Properties of Nonwoven Reinforced Thermoplastic Polyurethane Composites.

    Science.gov (United States)

    Tausif, Muhammad; Pliakas, Achilles; O'Haire, Tom; Goswami, Parikshit; Russell, Stephen J

    2017-06-05

    Reinforcement of flexible fibre reinforced plastic (FRP) composites with standard textile fibres is a potential low cost solution to less critical loading applications. The mechanical behaviour of FRPs based on mechanically bonded nonwoven preforms composed of either low or high modulus fibres in a thermoplastic polyurethane (TPU) matrix were compared following compression moulding. Nonwoven preform fibre compositions were selected from lyocell, polyethylene terephthalate (PET), polyamide (PA) as well as para-aramid fibres (polyphenylene terephthalamide; PPTA). Reinforcement with standard fibres manifold improved the tensile modulus and strength of the reinforced composites and the relationship between fibre, fabric and composite's mechanical properties was studied. The linear density of fibres and the punch density, a key process variable used to consolidate the nonwoven preform, were varied to study the influence on resulting FRP mechanical properties. In summary, increasing the strength and degree of consolidation of nonwoven preforms did not translate to an increase in the strength of resulting fibre reinforced TPU-composites. The TPU composite strength was mainly dependent upon constituent fibre stress-strain behaviour and fibre segment orientation distribution.

  9. Improvement of polymer stability by radiation grafting

    International Nuclear Information System (INIS)

    Ranogajec, F.; Mlinac-Misak, M.

    1999-01-01

    Losses of the stabilizer due to extractability or volatility immediately affect ultimate performance of polymer product. A new approach to increase the persistence of the stabilizer in the final product is to chemically bind it to the polymer backbone. Radiation grafting or crosslinking could be an efficient method for this, when the stabilizer is polymerizable. By a mutual gamma irradiation method, photoprotector 2-hydroxy-4-(3-methacryloxy-2- hydroxy-propoxy) benzophenone (HMB) has been readily grafted to low density polyethylene (LDPE) in benzene, tetrahydrofuran and methanol solution, respectively. Surface grafting occurs in a methanol solution of stabilizer, while in benzene and tetrahydrofuran solutions of stabilizer, grafting proceeds more or less in the inner parts of the polymeric film as well. The grafted LDPE film in methanol and tetrahydrofuran (containing 1 w/w % of grafted HMB), 1 w/w % blended HMB with LDPE and nongrafted LDPE film, were all exposed to accelerated aging and natural weathering and their spectral changes, expressed by the carbonyl index, were then compared. The change of elongation at break and tensile strength were measured in the course of aging. UV stability tests on aged films and change in mechanical properties indicate a pronounced protective effect achieved by grafted stabilizer. Grafting in methanol solution appears to be an efficient photostabilization treatment and the most economical with respect to the consumption of monomer, the grafting yield being less than 0.5%. Surface grafting is an efficient photostabilization method since grafted stabilizer is chemically bound to a polymeric surface and in this way the problem of evaporation of blended stabilizers during the prolonged use of polymeric materials is eliminated. (author)

  10. Electronic properties of blue phosphorene/graphene and blue phosphorene/graphene-like gallium nitride heterostructures.

    Science.gov (United States)

    Sun, Minglei; Chou, Jyh-Pin; Yu, Jin; Tang, Wencheng

    2017-07-05

    Blue phosphorene (BlueP) is a graphene-like phosphorus nanosheet which was synthesized very recently for the first time [Nano Lett., 2016, 16, 4903-4908]. The combination of electronic properties of two different two-dimensional materials in an ultrathin van der Waals (vdW) vertical heterostructure has been proved to be an effective approach to the design of novel electronic and optoelectronic devices. Therefore, we used density functional theory to investigate the structural and electronic properties of two BlueP-based heterostructures - BlueP/graphene (BlueP/G) and BlueP/graphene-like gallium nitride (BlueP/g-GaN). Our results showed that the semiconducting nature of BlueP and the Dirac cone of G are well preserved in the BlueP/G vdW heterostructure. Moreover, by applying a perpendicular electric field, it is possible to tune the position of the Dirac cone of G with respect to the band edge of BlueP, resulting in the ability to control the Schottky barrier height. For the BlueP/g-GaN vdW heterostructure, BlueP forms an interface with g-GaN with a type-II band alignment, which is a promising feature for unipolar electronic device applications. Furthermore, we discovered that both G and g-GaN can be used as an active layer for BlueP to facilitate charge injection and enhance the device performance.

  11. Influence of ischemia before vein grafting on early hyperplasia of the graft and the dynamic changes of the intima after grafting

    Directory of Open Access Journals (Sweden)

    Zou RongJiang

    2012-09-01

    Full Text Available Abstract Background To investigate both the influence of ischemia before grafting on early hyperplasia of the vein grafts, and the dynamic changes of the intima after grafting in a rabbit model of vein graft disease. Methods We performed paired vein graft experiments under different ischemic conditions (15 vs. 60 min; 15 vs. 90 min in the neck of the rabbits and compared the differences between the grafts. Clopidogrel, an anti-platelet agent, was administered before and after surgery. Twenty-eight days after the grafting procedure, the veins were evaluated microscopically. The dynamic changes of the intima after grafting were evaluated by scanning electron microscopy over time. Results The vein grafts subjected to 60- or 90-min ischemia exhibited no differences compared to those subjected to 15-min ischemia in terms of the mean thickness of the intimal, medial, and adventitial layers of the graft. Similarly, there was no difference in the Ki-67 labeling index (proliferation marker between the vein grafts. Vein grafts with 15-min ischemia lost endothelial cells (ECs but healed by 3 days post graft, whereas vein grafts with 90-min ischemia suffered serious EC loss, which was restored with new ECs during days 2 to 14 post graft. Conclusions Ninety-minute ischemia before vein grafting can cause serious EC loss, but does not increase early intimal hyperplasia when clopidogrel is administered. Protecting the vein from ischemia and reperfusion injury preserves ECs.

  12. EARLY DOWNHOME BLUES IN AMERICAN CULTURE

    OpenAIRE

    Muhni, Djuhertati Imam

    2012-01-01

    People's traditional music and the way people behave when performing it are symbolic expressions of broad cultural pattern and social organization . In other words music is a part of men's learned heritage . Hence this study is about music in a given culture, specifically blues in American culture . Allen Trachtenberg stated that blues songs are inheritance from the American past for negotiating black people's lives as Americans . In the experience of blues the African-Americans find themselv...

  13. The Red-Blue Transportation Problem

    OpenAIRE

    Vancroonenburg, Wim; Della Croce, Federico; Goossens, Dries; Spieksma, Frits

    2014-01-01

    This paper considers the Red-Blue Transportation Problem (Red-Blue TP), a generalization of the transportation problem where supply nodes are partitioned into two sets and so-called exclusionary constraints are imposed. We encountered a special case of this problem in a hospital context, where patients need to be assigned to rooms. We establish the problem's complexity, and we compare two integer programming formulations. Furthermore, a maximization variant of Red-Blue TP is presented, for...

  14. Detection of halogenated flame retardants in polyurethane foam by particle induced X-ray emission

    Science.gov (United States)

    Maley, Adam M.; Falk, Kyle A.; Hoover, Luke; Earlywine, Elly B.; Seymour, Michael D.; DeYoung, Paul A.; Blum, Arlene; Stapleton, Heather M.; Peaslee, Graham F.

    2015-09-01

    A novel application of particle-induced X-ray emission (PIXE) has been developed to detect the presence of chlorinated and brominated flame retardant chemicals in polyurethane foams. Traditional Gas Chromatography-Mass Spectrometry (GC-MS) methods for the detection and identification of halogenated flame retardants in foams require extensive sample preparation and data acquisition time. The elemental analysis of the halogens in polyurethane foam performed by PIXE offers the opportunity to identify the presence of halogenated flame retardants in a fraction of the time and sample preparation cost. Through comparative GC-MS and PIXE analysis of 215 foam samples, excellent agreement between the two methods was obtained. These results suggest that PIXE could be an ideal rapid screening method for the presence of chlorinated and brominated flame retardants in polyurethane foams.

  15. Sorption of diesel oil from polyurethane composite reinforced with palm fiber

    International Nuclear Information System (INIS)

    Dantas, I.R.; Cipriano, J.P.; Costa, I.L.M.; Mulinari, D.R.

    2016-01-01

    One of the methods to contain the diesel oil spill is the application of materials polymeric sorbents and the polyurethane is an option of porous sorbents. In this way, the objective of this study was to evaluate the use of polyurethane composites derivative of castor oil reinforced with palm fibers to sorption of diesel oil and compare with pure polyurethane. The composites were reinforced with 5 to 20% w/w of fibers. Subsequently, the sorption capacity of the composite in function of inserted fiber content in the matrix was analyzed. The physical and morphological characteristics were evaluated by scanning electron microscopy techniques (SEM) and diffraction X-ray (XRD) and the contact angle. The results showed that the composite with 20% w /w showed higher sorption capacity oil diesel compared to pure PU and other composites this fact was due to the heterogeneity of the pores and dispersion of fiber in the matrix. (author)

  16. Fracture Toughness Evaluation of Space Shuttle External Tank Thermal Protection System Polyurethane Foam Insulation Materials

    Science.gov (United States)

    McGill, Preston; Wells, Doug; Morgan, Kristin

    2006-01-01

    Experimental evaluation of the basic fracture properties of Thermal Protection System (TPS) polyurethane foam insulation materials was conducted to validate the methodology used in estimating critical defect sizes in TPS applications on the Space Shuttle External Fuel Tank. The polyurethane foam found on the External Tank (ET) is manufactured by mixing liquid constituents and allowing them to react and expand upwards - a process which creates component cells that are generally elongated in the foam rise direction and gives rise to mechanical anisotropy. Similarly, the application of successive foam layers to the ET produces cohesive foam interfaces (knitlines) which may lead to local variations in mechanical properties. This study reports the fracture toughness of BX-265, NCFI 24-124, and PDL-1034 closed-cell polyurethane foam as a function of ambient and cryogenic temperatures and knitline/cellular orientation at ambient pressure.

  17. Characterization of poly(L-lactide/Propylene glycol) based polyurethane films using ATR-FTIR spectroscopy

    Science.gov (United States)

    Manap, Siti Munirah; Ahmad, Azizan; Anuar, Farah Hannan

    2016-11-01

    A polyurethane films consisting of PLLA, PPG and PLLA-PPG were prepared using solution casting method. Three types of polyurethane were prepared: PPLA:PMDI, PPG:PMDI and PLLA-PPG:PMDI in the presence of polymeric diphenylmethane diisocyanate (PMDI) as the coupling agent and catalyst, Sn(Oct)2. The aim of this research was to improve the physicals properties of PLLA and PPG homopolymers through copolymerization between the two polymers. The homopolymers and polyurethane films were characterized using ATR-FTIR spectroscopy. Chemical reaction between PLLA, PPG and PMDI before and after the reaction were confirmed by observing the shifting of wavenumber for the carbonyl and ether group. Other than that, the additional band for N-H after the reaction indicated that the reaction was successful.

  18. Polyurethane spray coating of aluminum wire bonds to prevent corrosion and suppress resonant oscillations

    CERN Document Server

    INSPIRE-00092738; Kurth, Matthew; Boyd, Rusty

    2016-01-01

    Unencapsulated aluminum wedge wire bonds are common in particle physics pixel and strip detectors. Industry-favored bulk encapsulation is eschewed due to the range of operating temperatures and radiation. Wire bond failures are a persistent source of tracking-detector failure. Unencapsulated bonds are vulnerable to condensation-induced corrosion, particularly when halides are present. Oscillations from periodic Lorentz forces are documented as another source of wire bond failure. Spray application of polyurethane coatings, performance of polyurethane-coated wire bonds after climate chamber exposure, and resonant properties of polyurethane-coated wire bonds and their resistance to periodic Lorentz forces are under study for use in a future High Luminosity Large Hadron Collider detector such as the ATLAS Inner Tracker upgrade.

  19. Castor oil and commercial thermoplastic polyurethane membranes modified with polyaniline: a comparative study

    Energy Technology Data Exchange (ETDEWEB)

    Almeida Junior, Jose Humberto Santos; Meneguzzi, Alvaro; Ferreira, Carlos Arthur, E-mail: jhsajunior@globomail.com [Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegtre, RS (Brazil). Dept. de Engenharia de Materiais; Bertuol, Daniel Assumpcao [Universidade Federal de Santa Maria (UFSM), RS (Brazil). Dept. de Engenharia Quimica; Amado, Franco Dani Rico [Universidade Estadual de Santa Cruz (UESC), Ilheus, BA (Brazil). Dept. de Ciencias Exatas e Tecnologia

    2013-11-01

    The study of conducting polymeric membranes is decisive in some areas, as in fuel cells and electrodialysis. This work aims the study of membranes using conventional and conductive polymers blends. Two types of polyurethane were used as conventional polymers, commercial thermoplastic polyurethane and polyurethane synthesized from castor oil and 4-4-dicyclohexylmethane isocyanate. Two kinds of conducting polymers were used, polyaniline doped with organic acid and a self doped polyaniline. The polymers and the membranes were characterized by electrical conductivity, Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA) and scanning electron microscopy (SEM). The synthesis of the membranes produced was proper, featuring a complete reaction, analyzed by FTIR. The membranes also showed good mechanical properties and thermal stability ( Almost-Equal-To 220 Degree-Sign C). Among the membranes studied, the polyaniline doped with p-toluenesulphonic acid obtained higher thermal and viscoelastic properties. Thus they can be used in separation techniques using membranes. (author)

  20. [Cost-effectiveness of a TLC-NOSF polyurethane foam dressing].

    Science.gov (United States)

    Arroyo Ana, Abejón; Alvarez Vázquez, Juan Carlos; Blasco García, Carmen; Bermejo Martínez, Mariano; López Casanova, Pablo; Cuesta Cuesta, Juan José; De Haro Fernández, Francisco; Mateo Marín, Emilia; Segovia Gómez, Teresa; Villar Rojas, Antonio Erasto

    2012-11-01

    Chronic wounds represent a drain on the Spanish health system, nowdays is necessary an optimization of the resources used and that is for this that is necessary justify the use of the products over others through cost-effective studies for to show the economic benefit to professionals and the life quality of patient. This article compares the use of a new technology for format polyurethane foam, TLC-NOSF, with the most commonly used products for treating wounds. This comparison is made using a cost-effectiveness model (Markov Model). The results demonstrate that treatment with polyurethane foam dressing with TLC-NOSF are cost-effective versus treatments with polyurethane foams most commonly used in Spain.

  1. Castor oil and commercial thermoplastic polyurethane membranes modified with polyaniline: a comparative study

    Directory of Open Access Journals (Sweden)

    José Humberto Santos Almeida Júnior

    2013-01-01

    Full Text Available The study of conducting polymeric membranes is decisive in some areas, as in fuel cells and electrodialysis. This work aims the study of membranes using conventional and conductive polymers blends. Two types of polyurethane were used as conventional polymers, commercial thermoplastic polyurethane and polyurethane synthesized from castor oil and 4-4-dicyclohexylmethane isocyanate. Two kinds of conducting polymers were used, polyaniline doped with organic acid and a self doped polyaniline. The polymers and the membranes were characterized by electrical conductivity, Fourier transform infrared spectroscopy (FTIR, thermogravimetric analysis (TGA, dynamic mechanical analysis (DMA and scanning electron microscopy (SEM. The synthesis of the membranes produced was proper, featuring a complete reaction, analyzed by FTIR. The membranes also showed good mechanical properties and thermal stability (≈ 220 °C. Among the membranes studied, the polyaniline doped with p-toluenesulphonic acid obtained higher thermal and viscoelastic properties. Thus they can be used in separation techniques using membranes.

  2. Polymerized Nile Blue derivatives for plasticizer-free fluorescent ion optode microsphere sensors.

    Science.gov (United States)

    Ngeontae, Wittaya; Xu, Chao; Ye, Nan; Wygladacz, Katarzyna; Aeungmaitrepirom, Wanlapa; Tuntulani, Thawatchai; Bakker, Eric

    2007-09-05

    Lipophilic H+-selective fluorophores such as Nile Blue derivatives are widely used in ISE-based pH sensors and bulk optodes, and are commonly dissolved in a plasticized matrix such as PVC. Unfortunately, leaching of the active sensing ingredients and plasticizer from the matrix dictates the lifetime of the sensors and hampers their applications in vivo, especially with miniaturized particle based sensors. We find that classical copolymerization of Nile Blue derivatives containing an acrylic side group gives rise to multiple reaction products with different spectral and H+-binding properties, making this approach unsuitable for the development of reliable sensor materials. This limitation was overcome by grafting Nile Blue to a self-plasticized poly(n-butyl acrylate) matrix via an urea or amide linkage between the Nile Blue base structure and the polymer. Optode leaching experiments into methanol confirmed the successful covalent attachment of the two chromoionophores to the polymer matrix. Both polymerized Nile Blue derivatives have satisfactory pH response and appropriate optical properties that are suitable for use in ion-selective electrodes and optodes. Plasticizer-free Na+-selective microsphere sensors using the polymerized chromoionophores were fabricated under mild conditions with an in-house sonic microparticle generator for the measurement of sodium activities at physiological pH. The measuring range for sodium was found as 10(-1)-10(-4) M and 1-10(-3) M, for Nile Blue derivatives linked via urea and amide functionalities, respectively, at physiological pH. The observed ion-exchange constants of the plasticizer-free microsphere were log K(exch) = -5.6 and log K(exch) = -6.5 for the same two systems, respectively. Compared with earlier Na+-selective bulk optodes, the fabricated optical sensing microbeads reported here have agreeable selectivity patterns, reasonably fast response times, and more appropriate measuring ranges for determination of Na+ activity

  3. Spreader Grafts in Functional Rhinoplasty.

    Science.gov (United States)

    Kim, Leslie; Papel, Ira D

    2016-02-01

    Management of the middle vault is paramount to achieving optimal aesthetic and functional outcomes in rhinoplasty. The ideal treatment for middle vault complications, such as internal nasal valve collapse, inverted-V deformity, and middle vault dorsal asymmetry, is prevention. Risk factors for middle vault problems in rhinoplasty that may be identified in preoperative consultation include short nasal bones, long and weak upper lateral cartilages, thin skin, previous trauma or surgery, preoperative positive Cottle maneuver, tension nose deformity, and anteriorly positioned inferior turbinates. When any of these risk factors are identified, preventive measures should be pursued. These include preservation of middle vault support structures, judicious resection in dorsal hump reduction, use of conservative osteotomies, and reconstruction of the cartilaginous middle vault with structural grafting. Spreader grafts have become the workhorse in middle vault reconstruction. They are invaluable in restoring nasal dorsal aesthetic lines, repairing or maintaining the internal nasal valve, and buttressing a corrected crooked nose. Functional and aesthetic problems related to the middle nasal vault are among the most common reasons for patients seeking revision rhinoplasty. Although complications in rhinoplasty are inevitable, underlying their etiology and instituting prophylactic treatment can significantly help reduce their occurrence. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

  4. [Autologous fat grafting and rhinoplasty].

    Science.gov (United States)

    Nguyen, P S; Baptista, C; Casanova, D; Bardot, J; Magalon, G

    2014-12-01

    Revision rhinoplasty can be very challenging especially in cases of thin skin. Autologous fat graft is utilized in numerous applications in plastic surgery; however, its use relative to the nasal region remains uncommon. Adipose tissue, by virtue of its volumetric qualities and its action on skin trophicity, can be considered to be a gold standard implant. From 2006 until 2012, we have treated patients by lipofilling in order to correct sequelae of rhinoplasty. The mean quantity of adipose tissue injected was 2.1cm(3) depending on the importance of the deformity and the area of injection: irregularity of the nasal dorsum, visible lateral osteotomies, saddle nose. Following the course of our practice, we conceived micro-cannulas that allow a much greater accuracy in the placement of the graft and enable to perform interventions under local anesthesia. These non-traumatic micro-cannulas do not cause post-operative ecchymosis and swelling which shorten the recovery time for the patient. On patients who have undergone multiple operations, lipofilling can be a simple and reliable alternative to correct imperfections that may take place after a rhinoplasty. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

  5. Grafted hydroxypropyl guargum: Development, characterization and ...

    Indian Academy of Sciences (India)

    Synthesis of hydroxypropyl guargum--polyacrylamide was carried out by ceric ion induced redox polymerization technique at 28 ± 1°C. The graft copolymer was characterized by IR and thermal analysis. The flocculation performance of graft copolymer was tested in 1 wt% coal suspension.

  6. Grafted hydroxypropyl guargum: Development, characterization and ...

    Indian Academy of Sciences (India)

    Unknown

    Flocculation tests of coal fine suspension were carried out on column settling method and standard flocculation jar apparatus (supplied by M.B. Instruments, India). 3. Results and discussion. In the present investigation, two series of graft copoly- mers have been synthesized by grafting PAM onto HPG using ceric ion initiator, ...

  7. A novel initiating system for wool grafting

    Directory of Open Access Journals (Sweden)

    Magdy Kandil Zahran

    2016-05-01

    Full Text Available This paper describes a new method for the grafting of methacrylic acid (MAA and other acrylic monomers onto wool fabric in aqueous medium. The novelty principally concerns the chemical approach of the redox grafting reaction that was carried out in the presence of sodium perborate (SPB initiator. Before the grafting reaction was started, the wool fabric was treated first with a freshly prepared ferrous ammonium sulfate (FAS solution. The so-treated fabric formed, with SPB, an efficacious redox system capable of initiating grafting of methacrylic acid (MAA and other acrylic monomers onto the wool fabric. The effect of the polymerization conditions on the polymer criteria, namely, graft yield (%GY, homopolymer (%HP, total conversion (%TC, and grafting efficiency (%GE, was studied. These polymer criteria were found to depend spaciously upon concentrations of the Fe2+ ion (activator, SPB (initiator, and MAA, pH of the polymerization medium, duration and temperature of polymerization. The graft copolymerization reaction has also been carried out in the presence of polymerization activators (e.g. reductant transition metal ions and an inhibitor (e.g. hydroquinone. A suitable mechanism for the grafting processes has been suggested, in accordance with the experimental results.

  8. Oral mucosa grafts for urethral reconstruction

    African Journals Online (AJOL)

    Background: Urethral reconstruction has continued to present formidable and enormous challenges for urologic, ... reports reveal that split and full thickness skin grafts from the scrotum, penis, extragenital sites (ureter, saphenous ... Unlike other tissues, oral mucosa grafts are flexible, easy to harvest and trim and have.

  9. Graft loss after pediatric liver transplantation

    NARCIS (Netherlands)

    Sieders, E; Peeters, PMJG; TenVergert, EM; de Jong, KP; Porte, RJ; Zwaveling, JH; Bijleveld, CMA; Gouw, ASH; Slooff, MJH

    Objective To describe the epidemiology and causes of graft loss after pediatric liver transplantation and to identify risk factors. Summary Background Data Graft failure after transplantation remains an important problem. It results in patient death or retransplantation, resulting in lower survival

  10. Graft polymerization of glycidylmethacrylate onto coralline hydroxyapatite.

    Science.gov (United States)

    Murugan, R; Panduranga Rao, K

    2003-01-01

    Graft polymerization of glycidylmethacrylate (GMA) onto coralline hydroxyapatite (CHA) was carried out using potassium persulfate (K2S2O8) and sodium metabisulfite (Na2S2O5) as initiators in aqueous medium. To optimize the reaction conditions for getting maximum grafting yield, the concentrations of backbone, monomer, initiator, temperature and time were varied. The percent grafting was found to increase initially and then gradually decrease with respect to reaction parameters. The results obtained imply that the optimum temperature and time was 60 degrees C and 180 min, respectively, to obtain higher grafting yield. The grafting results have been discussed and a mechanism involved in the grafting of GMA onto CHA is described. The grafted materials were analyzed with Fourier transform infrared (FT-IR) spectroscopy and X-ray diffraction (XRD) measurements. The results of FT-IR confirmed the presence of epoxy group on the grafted CHA. The XRD pattern showed that there was no secondary phase in the apatite lattice due to chemical modification.

  11. Variable blue straggler stars in NGC 5466

    International Nuclear Information System (INIS)

    Harris, H.C.; Mateo, M.; Olszewski, E.W.; Nemec, J.M.

    1990-01-01

    Nine variable blue stragglers have been found in the globular cluster NGC 5466. The six dwarf Cepheids in this cluster coexist in the instability strip with other nonvariable stars. The three eclipsing binaries are among the hottest of the blue stragglers. The hypothesis is discussed that all blue stragglers in this cluster have undergone mass transfer in close binaries. Under this hypothesis, rotation and spin-down play important roles in controlling the evolution of blue stragglers in old clusters and in affecting some of their observational properties. 14 refs

  12. Morphological responses of wheat to blue light

    Science.gov (United States)

    Barnes, C.; Bugbee, B.

    1992-01-01

    Blue light significantly increased tillering in wheat (Triticum aestivum L.) plants grown at the same photosynthetic photon flux (PPF). Plants were grown under two levels of blue light (400-500 nm) in a controlled environment with continuous irradiation. Plants received either 50 micromoles m-2 s-1 of blue light or 2 micromoles m-2 s-1 blue light from filtered metal halide lamps at a total irradiance of 200 micromoles m-2 s-1 PPF (400-700 nm). Plants tillered an average of 25% more under the higher level of blue light. Blue light also caused a small, but consistent, increase in main culm development, measured as Haun stage. Leaf length was reduced by higher levels of blue light, while plant dry-mass was not significantly affected by blue light. Applying the principle of equivalent light action, the results suggest that tillering and leaf elongation are mediated by the blue-UV light receptor(s) because phytochrome photoequilibrium for each treatment were nearly identical.

  13. Why Blue-Collar Blacks Help Less

    OpenAIRE

    Smith, Sandra Susan; Young, Kara Alexis

    2013-01-01

    Why are blue-collar blacks less likely to help jobseekers than jobholders from other ethnoracial groups or even than more affluent blacks? Drawing from in-depth, semi-structured interviews with 97 black and Latino workers at one large, public sector employer, we find that blue-collar black workers both helped less proactively and rejected more requests for assistance than did blue-collar Latino and white-collar black workers. We attribute blue-collar blacks’ more passive engagement to their...

  14. The effect of monomer molecular weight on grafting reaction

    International Nuclear Information System (INIS)

    Wu Minghong; Ding Zhongli; Ma Zueteh

    1995-01-01

    In this paper, some condensed ethylene glycol acrylate monomers with different molecular weight being grafted to the PE film by means of pre-irradiation is reported. The effect of molecular weight of monomer on grafting reaction and the hydrophilicity of grafting sample have been discussed. The experimental results show: molar degrees of grafting decreased non-linearly with the increasement of molecular weight of monomer, the grafting reaction of polymer is greater effected by the swelling degree of PE film, the greater the swelling degree of grafting material, the higher the grating degree grafting is, the initial rate of grafting reaction decreased with the increasement of molecular weight of monomer. (author)

  15. Coaxial electrospinning multicomponent functional controlled-release vascular graft: Optimization of graft properties.

    Science.gov (United States)

    Yin, Anlin; Luo, Rifang; Li, Jiukai; Mo, Xiumei; Wang, Yunbing; Zhang, Xingdong

    2017-04-01

    Small diameter vascular grafts possessing desirable biocompatibility and suitable mechanical properties have become an urgent clinic demand. Herein, heparin loaded fibrous grafts of collagen/chitosan/poly(l-lactic acid-co-ε-caprolactone) (PLCL) were successfully fabricated via coaxial electrospinning. By controlling the concentration of heparin and the ratio of collagen/chitosan/PLCL, most grafts had the heparin encapsulation efficiency higher than 70%, and the heparin presented sustained release for more than 45 days. Particularly, such multicomponent grafts had relative low initial burst release, and after heparin releasing for 3 weeks, the grafts still showed good anti-platelet adhesion ability. In addition, along with the excellent cell biocompatibility, the fabricated grafts possessed suitable mechanical properties including good tensile strength, suture retention strength, burst pressure and compliance which could well match the native blood vessels. Thus, the optimized graft properties could be properly addressed for vascular tissue application via coaxial electrospinning. Copyright © 2017 Elsevier B.V. All rights reserved.

  16. Dipodal Silane-modified Nano Fe3O4/Polyurethane Magnetic Nanocomposites: Preparation and Characterization

    Directory of Open Access Journals (Sweden)

    Mir Mohammad Alavi Nikje

    2016-01-01

    Full Text Available Magnetic nanocomposites were prepared by incorporation of pure Fe3O4 and surface-modified Fe3O4 nanoparticles (dipodal silane-modified Fe3O4 into a polyurethane elastomer matrix by in situ polymerization method. In preparation of these magnetic nanocomposites, polycaprolactone (PCL was used as a polyester polyol. Because of dipole-dipole interactions between nanoparticles and a large surface area to volume ratio, the magnetic iron oxide nanoparticles tended to agglomerate. Furthermore, the most important challenge was to coat the surface of magnetic Fe3O4 nanoparticles in order to prepare well dispersed and stabilized Fe3O4 magnetic nanoparticles. It was observed that surface modification of Fe3O4 nanoparticles enhanced the dispersion of the nanoparticles in polyurethane matrices and allowed magnetic nanocomposites to be prepared with better properties. Surface modification of Fe3O4 was performed by dipodal silane synthesized based on 3-aminopropyltriethoxysilane (APTS and γ-glycidoxypropyl trimethoxysilane (GPTS. Dipodal silane-coated magnetic nanoparticles (DScMNPs were synthesized and incorporated into the polyurethane elastomer matrix as reinforcing agents. The formation of dipodal silane was investigated by Fourier transform infrared spectroscopy (FTIR, proton nuclear magnetic resonance spectroscopy (1H NMR and transmission electron microscopy (TEM. Characterization and study on the magnetic polyurethane elastomer nanocomposites were performed by FTIR, thermogravimetric analysis (TGA, scanning electron microscopy (SEM, vibrating sample magnetometry (VSM and dynamic mechanical thermal analysis (DMTA. The VSM results showed that the synthesized polyurethane elastomer nanocomposites had a superparamagnetic behavior. The TGA results showed that the thermal stability of dipodal silane-modified Fe3O4/PU nanocomposite was higher than that of Fe3O4/PU nanocomposite. This could be attributed to better dispersion and compatibility of dipodal silane

  17. Polyethylene oxide hydration in grafted layers

    Science.gov (United States)

    Dormidontova, Elena; Wang, Zilu

    Hydration of water soluble polymers is one of the key-factors defining their conformation and properties, similar to biopolymers. Polyethylene oxide (PEO) is one of the most important biomedical-applications polymers and is known for its reverse temperature solubility due to hydrogen bonding with water. As in many practical applications PEO chains are grafted to surfaces, e.g. of nanoparticles or planar surfaces, it is important to understand PEO hydration in such grafted layers. Using atomistic molecular dynamic simulations we investigate the details of molecular conformation and hydration of PEO end-grafted to gold surfaces. We analyze polymer and water density distribution as a function of distance from the surface for different grafting densities. Based on a detailed analysis of hydrogen bonding between polymer and water in grafted PEO layers, we will discuss the extent of PEO hydration and its implication for polymer conformation, mobility and layer properties. This research is supported by NSF (DMR-1410928).

  18. Graft Take-Rates After Tympanoplasty

    DEFF Research Database (Denmark)

    Andersen, Steven Arild Wuyts; Aabenhus, Kristine; Glad, Henrik

    2014-01-01

    OBJECTIVE: To present a prospective ear surgery database and investigate the graft take-rate and prognostic factors for graft take-rate in tympanoplasty using the database. STUDY DESIGN: Prospective database study. SETTING: Tertiary referral center. PATIENTS: A total of 1606 cases undergoing...... tympanoplasty types I to IV were registered in the database in the period from February 2004 to November 2013. INTERVENTION: A total of 837 cases underwent myringoplasty/tympanoplasty type I. MAIN OUTCOME MEASURE: Graft take-rate and prognostic factors (age, discharge at time of surgery, tuba function......, technique, graft material, and revision surgery) for tympanoplasty type I were studied. A comparison with the graft take-rates for tympanoplasty types II to IV and/or cholesteatoma was made. RESULTS: A user-friendly ear surgery database with fast data entry and direct import of audiometric data...

  19. Study of the morphology exhibited by linear segmented polyurethanes during shape memory cycles

    International Nuclear Information System (INIS)

    Pereira, I.M.; Orefice, R.L.

    2009-01-01

    By using small-angle X-ray, this study aims to identify the role of the morphological structures of linear segmented thermoplastic polyurethane during shape memory cycle. A deformed specimen was placed on a heating stage mounted at the beamline; the shape recovery was measured during 20min. Furthermore, to study the influence of the temperature during recover, the specimens were subjected to different thermo-cycle. In each condition, the phase morphology and composition were investigated. Recovery process was separated into three stages. Bulk incompatibility and entropic recovery were the two controlling features for determining the final polyurethane morphology. (author)

  20. Thermal Behaviour of a Gypsum Fibre Board Associated with Rigid Polyurethane Foam under Standard Fire Conditions

    DEFF Research Database (Denmark)

    Dreau, Jerome Le; Jensen, Rasmus Lund; Kolding, Klaus

    2015-01-01

    Due to its low thermal conductivity (λ ≈ 20 mW/m.K), rigid polyurethane (PUR) foam has the potential to improve the thermal performance of buildings without increasing the thickness of construction elements. Nevertheless, PUR foam has the drawback of having a low resistance to fire: non-flaming t......Due to its low thermal conductivity (λ ≈ 20 mW/m.K), rigid polyurethane (PUR) foam has the potential to improve the thermal performance of buildings without increasing the thickness of construction elements. Nevertheless, PUR foam has the drawback of having a low resistance to fire: non...